WorldWideScience

Sample records for superfund npl characterization

  1. SITE COMPREHENSIVE LISTING (CERCLIS) (Superfund) - NPL Sites

    Data.gov (United States)

    U.S. Environmental Protection Agency — National Priorities List (NPL) Sites - The Comprehensive Environmental Response, Compensation and Liability Information System (CERCLIS) (Superfund) Public Access...

  2. SITE COMPREHENSIVE LISTING (CERCLIS) (Superfund) - Non-NPL Sites

    Data.gov (United States)

    U.S. Environmental Protection Agency — Non-NPL Sites - The Comprehensive Environmental Response, Compensation and Liability Information System (CERCLIS) (Superfund) Public Access Database contains a...

  3. Region 9 NPL Sites (Superfund Sites) Polygons

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site POLYGON locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  4. Region 9 NPL Sites (Superfund Sites 2013)

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site POINT locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  5. Region 9 NPL Sites (Superfund Sites)

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site POINT locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  6. Superfund/IGD: EF_NPL

    Data.gov (United States)

    U.S. Environmental Protection Agency — EF_NPL is a subset of facilities from FRS_INTEREST and FRS_FACILITY_SITE which are updated on a monthly basis as part of the Locational Reference Tables (LRT)...

  7. Superfund National Priority List (NPL) Site Boundaries

    Data.gov (United States)

    U.S. Environmental Protection Agency — A set of site boundaries for each site in EPA Region 1 (Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, and Vermont) on EPA's Superfund National...

  8. Region 9 NPL Sites (Superfund Sites 2013) Polygons

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site POLYGON locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  9. NPL Site Boundaries

    Data.gov (United States)

    U.S. Environmental Protection Agency — The National Priorities List (NPL) is a list published by EPA of Superfund sites. A site must be added to this list before remediation can begin under Superfund. The...

  10. NPL Site Locations

    Data.gov (United States)

    U.S. Environmental Protection Agency — The National Priorities List (NPL) is a list published by EPA of Superfund sites. A site must be added to this list before remediation can begin under Superfund. The...

  11. NPL Site Locations

    Data.gov (United States)

    U.S. Environmental Protection Agency — The National Priorities List (NPL) is a list published by EPA of Superfund sites. A site must be added to this list before remediation can begin under Superfund. The...

  12. Cleanups In My Community (CIMC) - Superfund National Priority List (NPL) Sites, National Layer

    Data.gov (United States)

    U.S. Environmental Protection Agency — This data layer provides access to Superfund National Priority List Sites as part of the CIMC web service. Superfund is a program administered by the EPA to locate,...

  13. Geophysical logging and thermal imaging at the Hemphill Road TCE NPL Superfund site near Gastonia, North Carolina

    Science.gov (United States)

    Antolino, Dominick J.; Chapman, Melinda J.

    2017-01-01

    The collection of borehole geophysical logs and thermal imaging data was conducted by the U.S. Geological Survey South Atlantic Water Science Center in the vicinity of the Hemphill Road TCE National Priorities List Superfund site near Gastonia, North Carolina, during August 2014 through February 2015. In an effort to assist the U.S. Environmental Protection Agency in the development of a conceptual groundwater model for the assessment of current contaminant distribution and future migration of contaminants, surface geological mapping and borehole geophysical log and image data collection, which included the delineation of more than 600 subsurface features (primarily fracture orientations) was conducted in 5 open borehole wells and 2 private supply bedrock wells. In addition, areas of potential groundwater discharge within a down-gradient, nearby creek were determined using thermal imagery to calculate temperature differences between the stream and bank seepage.

  14. Region 9 NPL Sites - 2014

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site point locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  15. NPL 1999 Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    None

    2000-01-01

    OAK-B135 NPL 1999 Annual Report. The Nuclear Physics Laboratory at the University of Washington in Seattle pursues a broad program of nuclear physics research. Research activities are conducted locally and at remote sites. The current program includes ''in-house'' research on nuclear collisions using the local tandem Van de Graaff and superconducting linac accelerators as well as local and remote non-accelerator research on fundamental symmetries and weak interactions and user-mode research on relativistic heavy ions at large accelerator facilities around the world.

  16. Spatial disparity in the distribution of superfund sites in South Carolina: an ecological study.

    Science.gov (United States)

    Burwell-Naney, Kristen; Zhang, Hongmei; Samantapudi, Ashok; Jiang, Chengsheng; Dalemarre, Laura; Rice, LaShanta; Williams, Edith; Wilson, Sacoby

    2013-11-06

    According to the US Environmental Protection Agency (EPA), Superfund is a federal government program implemented to clean up uncontrolled hazardous waste sites. Twenty-six sites in South Carolina (SC) have been included on the National Priorities List (NPL), which has serious human health and environmental implications. The purpose of this study was to assess spatial disparities in the distribution of Superfund sites in SC. The 2000 US census tract and block level data were used to generate population characteristics, which included race/ethnicity, socioeconomic status (SES), education, home ownership, and home built before 1950. Geographic Information Systems (GIS) were used to map Superfund facilities and develop choropleth maps based on the aforementioned sociodemographic variables. Spatial methods, including mean and median distance analysis, buffer analysis, and spatial approximation were employed to characterize burden disparities. Regression analysis was performed to assess the relationship between the number of Superfund facilities and population characteristics. Spatial coincidence results showed that of the 29.5% of Blacks living in SC, 55.9% live in Superfund host census tracts. Among all populations in SC living below poverty (14.2%), 57.2% were located in Superfund host census tracts. Buffer analyses results (0.5mi, 1.0mi, 5.0mi, 0.5km, 1.0km, and 5.0km) showed a higher percentage of Whites compared to Blacks hosting a Superfund facility. Conversely, a slightly higher percentage of Blacks hosted (30.2%) a Superfund facility than those not hosting (28.8%) while their White counterparts had more equivalent values (66.7% and 67.8%, respectively). Regression analyses in the reduced model (Adj. R2 = 0.038) only explained a small percentage of the variance. In addition, the mean distance for percent of Blacks in the 90th percentile for Superfund facilities was 0.48mi. Burden disparities exist in the distribution of Superfund facilities in SC at the block and

  17. Mining-related sediment and soil contamination in a large Superfund site: Characterization, habitat implications, and remediation

    Science.gov (United States)

    Juracek, Kyle E.; Drake, K. D.

    2016-01-01

    Historical mining activity (1850–1970) in the now inactive Tri-State Mining District provided an ongoing source of lead and zinc to the environment including the US Environmental Protection Agency Superfund site located in Cherokee County, southeast Kansas, USA. The resultant contamination adversely affected biota and caused human health problems and risks. Remediation in the Superfund site requires an understanding of the magnitude and extent of contamination. To provide some of the required information, a series of sediment and soil investigations were conducted in and near the Superfund site to characterize lead and zinc contamination in the aquatic and floodplain environments along the main-stem Spring River and its major tributaries. In the Superfund site, the most pronounced lead and zinc contamination, with concentrations that far exceed sediment quality guidelines associated with potential adverse biological effects, was measured for streambed sediments and floodplain soils located within or downstream from the most intensive mining-affected areas. Tributary streambeds and floodplains in affected areas are heavily contaminated with some sites having lead and zinc concentrations that are an order of magnitude (or more) greater than the sediment quality guidelines. For the main-stem Spring River, the streambed is contaminated but the floodplain is mostly uncontaminated. Measured lead and zinc concentrations in streambed sediments, lakebed sediments, and floodplain soils documented a persistence of the post-mining contamination on a decadal timescale. These results provide a basis for the prioritization, development, and implementation of plans to remediate contamination in the affected aquatic and floodplain environments within the Superfund site.

  18. Mining-Related Sediment and Soil Contamination in a Large Superfund Site: Characterization, Habitat Implications, and Remediation.

    Science.gov (United States)

    Juracek, K E; Drake, K D

    2016-10-01

    Historical mining activity (1850-1970) in the now inactive Tri-State Mining District provided an ongoing source of lead and zinc to the environment including the US Environmental Protection Agency Superfund site located in Cherokee County, southeast Kansas, USA. The resultant contamination adversely affected biota and caused human health problems and risks. Remediation in the Superfund site requires an understanding of the magnitude and extent of contamination. To provide some of the required information, a series of sediment and soil investigations were conducted in and near the Superfund site to characterize lead and zinc contamination in the aquatic and floodplain environments along the main-stem Spring River and its major tributaries. In the Superfund site, the most pronounced lead and zinc contamination, with concentrations that far exceed sediment quality guidelines associated with potential adverse biological effects, was measured for streambed sediments and floodplain soils located within or downstream from the most intensive mining-affected areas. Tributary streambeds and floodplains in affected areas are heavily contaminated with some sites having lead and zinc concentrations that are an order of magnitude (or more) greater than the sediment quality guidelines. For the main-stem Spring River, the streambed is contaminated but the floodplain is mostly uncontaminated. Measured lead and zinc concentrations in streambed sediments, lakebed sediments, and floodplain soils documented a persistence of the post-mining contamination on a decadal timescale. These results provide a basis for the prioritization, development, and implementation of plans to remediate contamination in the affected aquatic and floodplain environments within the Superfund site.

  19. Mining-Related Sediment and Soil Contamination in a Large Superfund Site: Characterization, Habitat Implications, and Remediation

    Science.gov (United States)

    Juracek, K. E.; Drake, K. D.

    2016-10-01

    Historical mining activity (1850-1970) in the now inactive Tri-State Mining District provided an ongoing source of lead and zinc to the environment including the US Environmental Protection Agency Superfund site located in Cherokee County, southeast Kansas, USA. The resultant contamination adversely affected biota and caused human health problems and risks. Remediation in the Superfund site requires an understanding of the magnitude and extent of contamination. To provide some of the required information, a series of sediment and soil investigations were conducted in and near the Superfund site to characterize lead and zinc contamination in the aquatic and floodplain environments along the main-stem Spring River and its major tributaries. In the Superfund site, the most pronounced lead and zinc contamination, with concentrations that far exceed sediment quality guidelines associated with potential adverse biological effects, was measured for streambed sediments and floodplain soils located within or downstream from the most intensive mining-affected areas. Tributary streambeds and floodplains in affected areas are heavily contaminated with some sites having lead and zinc concentrations that are an order of magnitude (or more) greater than the sediment quality guidelines. For the main-stem Spring River, the streambed is contaminated but the floodplain is mostly uncontaminated. Measured lead and zinc concentrations in streambed sediments, lakebed sediments, and floodplain soils documented a persistence of the post-mining contamination on a decadal timescale. These results provide a basis for the prioritization, development, and implementation of plans to remediate contamination in the affected aquatic and floodplain environments within the Superfund site.

  20. Superfund Query

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Superfund Query allows users to retrieve data from the Comprehensive Environmental Response, Compensation, and Liability Information System (CERCLIS) database.

  1. Region 9 NPL Site (Polygons) 2015

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site POLYGON locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  2. Region 9 NPL Site Polygons - 2014

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site POLYGON locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  3. Region 9 NPL Sites (Points) 2015

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site point locations for the US EPA, Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  4. Characterization of ecological risks at the Milltown Reservoir-Clark Fork River Sediments Superfund Site, Montana

    Science.gov (United States)

    Pascoe, Gary A.; Blanchet, Richard J.; Linder, Greg L.; Palawski, Don; Brumbaugh, William G.; Canfield, Tim J.; Kemble, Nile E.; Ingersoll, Chris G.; Farag, Aïda M.; DalSoglio, Julie A.

    1994-01-01

    A comprehensive field and laboratory approach to the ecological risk assessment for the Milltown Reservoir-Clark Fork River Sediments Site, a Superfund site in the Rocky Mountains of Montana, has been described in the preceding reports of this series. The risk assessment addresses concerns over the ecological impacts of upstream releases of mining wastes to fisheries of the upper Clark Fork River (CFR) and the benthic and terrestrial habitats further downstream in Milltown Reservoir. The risk characterization component of the process integrated results from a triad of information sources: (a) chemistry studies of environmental media to identify and quantify exposures of terrestrial and aquatic organisms to site-related contaminants; (b) ecological or population studies of terrestrial vegetation, birds, benthic communities, and fish; and (c) in situ and laboratory toxicity studies with terrestrial and aquatic invertebrates and plants, small mammals, amphibians, and fish exposed to contaminated surface water, sediments, wetland soils, and food sources. Trophic transfer studies were performed on waterfowl, mammals, and predatory birds using field measurement data on metals concentrations in environmental media and lower trophic food sources. Studies with sediment exposures were incorporated into the Sediment Quality Triad approach to evaluate risks to benthic ecology. Overall results of the wetland and terrestrial studies suggested that acute adverse biological effects were largely absent from the wetland; however, adverse effects to reproductive, growth, and physiological end points of various terrestrial and aquatic species were related to metals exposures in more highly contaminated depositional areas. Feeding studies with contaminated diet collected from the upper CFR indicated that trout are at high risk from elevated metals concentrations in surface water, sediment, and aquatic invertebrates. Integration of chemical analyses with toxicological and ecological

  5. Grain Handling Facility at Freeman, Washington Added to Superfund Cleanup List

    Science.gov (United States)

    (September 28, 2015 - Seattle) The U.S. Environmental Protection Agency has added the Grain Handling Facility at Freeman, in Spokane County, Washington, to the Superfund National Priorities List. The site was added to the NPL after EPA considered input rec

  6. Superfund Site Information

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes a number of individual data sets related to site-specific information for Superfund, which is governed under the Comprehensive Environmental...

  7. Superfund Technical Assistance Grants

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes data related to the Superfund Technical Assistance Grant program, including grant number, award amounts, award dates, period of performance,...

  8. Hydrogeologic characterization and assessment of bioremediation of chlorinated benzenes and benzene in wetland areas, Standard Chlorine of Delaware, Inc. Superfund Site, New Castle County, Delaware, 2009-12

    Science.gov (United States)

    Lorah, Michelle M.; Walker, Charles W.; Baker, Anna C.; Teunis, Jessica A.; Majcher, Emily H.; Brayton, Michael J.; Raffensperger, Jeff P.; Cozzarelli, Isabelle M.

    2014-01-01

    Wetlands at the Standard Chlorine of Delaware, Inc. Superfund Site (SCD) in New Castle County, Delaware, are affected by contamination with chlorobenzenes and benzene from past waste storage and disposal, spills, leaks, and contaminated groundwater discharge. In cooperation with the U.S. Environmental Protection Agency, the U.S. Geological Survey began an investigation in June 2009 to characterize the hydrogeology and geochemistry in the wetlands and assess the feasibility of monitored natural attenuation and enhanced bioremediation as remedial strategies. Groundwater flow in the wetland study area is predominantly vertically upward in the wetland sediments and the underlying aquifer, and groundwater discharge accounts for a minimum of 47 percent of the total discharge for the subwatershed of tidal Red Lion Creek. Thus, groundwater transport of contaminants to surface water could be significant. The major contaminants detected in groundwater in the wetland study area included benzene, monochlorobenzene, and tri- and di-chlorobenzenes. Shallow wetland groundwater in the northwest part of the wetland study area was characterized by high concentrations of total chlorinated benzenes and benzene (maximum about 75,000 micrograms per liter [μg/L]), low pH, and high chloride. In the northeast part of the wetland study area, wetland groundwater had low to moderate concentrations of total chlorinated benzenes and benzene (generally not greater than 10,000 μg/L), moderate pH, and high sulfate concentrations. Concentrations in the groundwater in excess of 1 percent of the solubility of the individual chlorinated benzenes indicate that a contaminant source is present in the wetland sediments as dense nonaqueous phase liquids (DNAPLs). Consistently higher contaminant concentrations in the shallow wetland groundwater than deeper in the wetland sediments or the aquifer also indicate a continued source in the wetland sediments, which could include dissolution of DNAPLs and

  9. SITE COMPREHENSIVE LISTING (CERCLIS) (Superfund)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Comprehensive Environmental Response, Compensation and Liability Information System (CERCLIS) (Superfund) Public Access Database contains a selected set of...

  10. National Priorities List (NPL) Site Points, Region 9, 2012, US EPA Region 9

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site POINT locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  11. National Priorities List (NPL) Site Polygons, Region 9, 2012, US EPA Region 9

    Data.gov (United States)

    U.S. Environmental Protection Agency — NPL site POLYGON locations for the US EPA Region 9. NPL (National Priorities List) sites are hazardous waste sites that are eligible for extensive long-term cleanup...

  12. 75 FR 49414 - Cooperative Agreements and Superfund State Contracts for Superfund Response Actions

    Science.gov (United States)

    2010-08-13

    ... AGENCY 40 CFR Part 35 RIN 2050-AG58 Cooperative Agreements and Superfund State Contracts for Superfund... Superfund Cooperative Agreements and Superfund State Contracts. DATES: This rule is effective October 12... requirements shall apply to all new Cooperative Agreements and Superfund State Contracts, funded under...

  13. Geochemical Characterization of Mine Waste, Mine Drainage, and Stream Sediments at the Pike Hill Copper Mine Superfund Site, Orange County, Vermont

    Science.gov (United States)

    Piatak, Nadine M.; Seal, Robert R.; Hammarstrom, Jane M.; Kiah, Richard G.; Deacon, Jeffrey R.; Adams, Monique; Anthony, Michael W.; Briggs, Paul H.; Jackson, John C.

    2006-01-01

    The Pike Hill Copper Mine Superfund Site in the Vermont copper belt consists of the abandoned Smith, Eureka, and Union mines, all of which exploited Besshi-type massive sulfide deposits. The site was listed on the U.S. Environmental Protection Agency (USEPA) National Priorities List in 2004 due to aquatic ecosystem impacts. This study was intended to be a precursor to a formal remedial investigation by the USEPA, and it focused on the characterization of mine waste, mine drainage, and stream sediments. A related study investigated the effects of the mine drainage on downstream surface waters. The potential for mine waste and drainage to have an adverse impact on aquatic ecosystems, on drinking- water supplies, and to human health was assessed on the basis of mineralogy, chemical concentrations, acid generation, and potential for metals to be leached from mine waste and soils. The results were compared to those from analyses of other Vermont copper belt Superfund sites, the Elizabeth Mine and Ely Copper Mine, to evaluate if the waste material at the Pike Hill Copper Mine was sufficiently similar to that of the other mine sites that USEPA can streamline the evaluation of remediation technologies. Mine-waste samples consisted of oxidized and unoxidized sulfidic ore and waste rock, and flotation-mill tailings. These samples contained as much as 16 weight percent sulfides that included chalcopyrite, pyrite, pyrrhotite, and sphalerite. During oxidation, sulfides weather and may release potentially toxic trace elements and may produce acid. In addition, soluble efflorescent sulfate salts were identified at the mines; during rain events, the dissolution of these salts contributes acid and metals to receiving waters. Mine waste contained concentrations of cadmium, copper, and iron that exceeded USEPA Preliminary Remediation Goals. The concentrations of selenium in mine waste were higher than the average composition of eastern United States soils. Most mine waste was

  14. SUPERFUND CLEANUPS AND INFANT HEALTH

    Science.gov (United States)

    Currie, Janet; Greenstone, Michael; Moretti, Enrico

    2013-01-01

    We are the first to examine the effect of Superfund cleanups on infant health rather than focusing on proximity to a site. We study singleton births to mothers residing within 5km of a Superfund site between 1989–2003 in five large states. Our “difference in differences” approach compares birth outcomes before and after a site clean-up for mothers who live within 2,000 meters of the site and those who live between 2,000– 5,000 meters of a site. We find that proximity to a Superfund site before cleanup is associated with a 20 to 25% increase in the risk of congenital anomalies. PMID:25152535

  15. EPA Region 2 Draft NPL Site Contamination Area Boundaries as of February 2007 GIS Layer [EPA.R2_NPL_CONTAMBND

    Data.gov (United States)

    U.S. Environmental Protection Agency — This layer represents the contamination boundaries of all NPL sites located in EPA Region Region 2 (New York, New Jersey, Puerto Rico and the U.S. Virgin Islands)....

  16. ‘Initiative-Decision’ Typology of New Product Launching (NPL into Local Market: Toward Interaction Mechanism

    Directory of Open Access Journals (Sweden)

    Firmanzah

    2009-12-01

    Full Text Available New product launching (NPL process in subsidiaries is very complex, expensive and risky. This process is marked by the problem of role partition between headquarter and subsidiaries. This research emphasizes the quality of relation between subsidiaries and headquarter which determines the qualities of NPL process into local market. Typology of initiative-decision during NPL process has been documented. Using cluster analysis, three clusters of ‘initiative-decision’ during NPL are found in this research: ‘headquarters domination’, ‘mix-initiative’ and ‘interaction’. Using ANOVA analysis, this research found that interaction between subsidiary and headquarter managers positively increases the effectiveness of marketing-strategy during NPL process. This finding suggests that interaction mechanism between subsidiary and headquarter is the best solution to launch a new product to the local market.

  17. Superfund Site Information - Site Sampling Data

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes Superfund site-specific sampling information including location of samples, types of samples, and analytical chemistry characteristics of...

  18. CERCLIS (Superfund) ASCII Text Format - CPAD Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Comprehensive Environmental Response, Compensation and Liability Information System (CERCLIS) (Superfund) Public Access Database (CPAD) contains a selected set...

  19. Issuance of Final Guidance: Ecological Risk Assessment and Risk Management Principles for Superfund Sites, October 7, 1999

    Science.gov (United States)

    This guidance is intended to help Superfund risk managers make ecological risk management decisions that are based on sound science, consistent across Regions, and present a characterization of site risks that is transparent to the public.

  20. NPL-PAD (National Priorities List Publication Assistance Database) for Region 7

    Data.gov (United States)

    U.S. Environmental Protection Agency — THIS DATA ASSET NO LONGER ACTIVE: This is metadata documentation for the National Priorities List (NPL) Publication Assistance Databsae (PAD), a Lotus Notes...

  1. Npl Ionospheric Model for Radio Communication and Navigational Applications

    Science.gov (United States)

    Singh Dabas, Raj

    In the areas of Radio Communication and Navigation, present day need of the users are to achieve higher performance communication, better navigation, positioning which can only be possible through improved Ionospheric Modeling, its now casting and forecast-ing. Therefore, National Physical Laboratory (NPL), New Delhi has develop a user friendly, Empirical Ionospheric Model (NPL Model) for the Indian zone which gives all the F-region Parameters like foF2, NmF2, hmF2, Ne Profiles and the Ionospheric Electron Content (IEC) for different Radio Communication/Navigational applications. Basically, two HF prediction models for short and long term predictions are developed for equatorial and low latitude iono-sphere. Short term HF prediction model is based on Multiple Regression Analysis (MRA) for the dependence of F-region parameters namely foF2 and M(3000)F2, on solar 2800 MHz flux (F10), and geomagnetic index Ap whereas for long term prediction, Second Degree (SD) coefficients are generated by fitting monthly median foF2 and M(3000)F2 with corresponding 12 monthly mean sunspot numbers (R12) using data over three solar cycles. For generating MRA coefficients, daily foF2, M(3000)F2 values for each hour, obtained from Delhi (28.6N, 77.1E) digital ionosonde for about half a solar cycle are used. MRA coefficients, separately for quiet (Ap25) periods, for foF2 and M(3000)F2, are obtained for every month over 24 UT times using daily F10 and Ap values. Whereas SD coefficients are obtained each month at all local times for all the 14 stations covering a geographic latitude range from about 0 to 45 N. IEC model is developed in two ways. Firstly, IEC model is also developed using monthly median foF2 and hmF2 values for each hours for all the 14 stations which are feed into IRI 2000 model to calculate respective IEC values for two altitudes namely 1000km and 2000km. Then, second degree coefficients are generated by fitting monthly median IEC with corresponding 12 monthly mean

  2. Air-water exchange of PAHs and OPAHs at a superfund mega-site.

    Science.gov (United States)

    Tidwell, Lane G; Blair Paulik, L; Anderson, Kim A

    2017-12-15

    Chemical fate is a concern at environmentally contaminated sites, but characterizing that fate can be difficult. Identifying and quantifying the movement of chemicals at the air-water interface are important steps in characterizing chemical fate. Superfund sites are often suspected sources of air pollution due to legacy sediment and water contamination. A quantitative assessment of polycyclic aromatic hydrocarbons (PAHs) and oxygenated PAH (OPAHs) diffusive flux in a river system that contains a Superfund Mega-site, and passes through residential, urban and agricultural land, has not been reported before. Here, passive sampling devices (PSDs) were used to measure 60 polycyclic aromatic hydrocarbons (PAHs) and 22 oxygenated PAH (OPAHs) in air and water. From these concentrations the magnitude and direction of contaminant flux between these two compartments was calculated. The magnitude of PAH flux was greater at sites near or within the Superfund Mega-site than outside of the Superfund Mega-site. The largest net individual PAH deposition at a single site was naphthalene at a rate of -14,200 (±5780) (ng/m(2))/day. The estimated one-year total flux of phenanthrene was -7.9×10(5) (ng/m(2))/year. Human health risk associated with inhalation of vapor phase PAHs and dermal exposure to PAHs in water were assessed by calculating benzo[a]pyrene equivalent concentrations. Excess lifetime cancer risk estimates show potential increased risk associated with exposure to PAHs at sites within and in close proximity to the Superfund Mega-site. Specifically, estimated excess lifetime cancer risk associated with dermal exposure and inhalation of PAHs was above 1 in 1 million within the Superfund Mega-site. The predominant depositional flux profile observed in this study suggests that the river water in this Superfund site is largely a sink for airborne PAHs, rather than a source. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. The NPL/ESA Micro-Newton Thrust Balance

    Science.gov (United States)

    Hughes, Ben; Perez Luna, Jaime

    2012-07-01

    Europe is pursuing a number of unique science missions which require extremely high performance micro- propulsion systems to perform precision attitude control to meet their challenging scientific goals. A number of different propulsion systems are under development to try and meet these needs, including systems based on FEEP, mini-ion and cold gas thruster technologies. The critical performance requirements for the thrusters are related to thrust accuracy, dynamic response and noise, where very challenging requirements are set. Although it is anticipated that the thruster technologies can meet these challenging requirements, verification of these performances by test presents its own difficulties, since the magnitude of the thrust noise required is close to the limit of available measurement devices, and the practicalities of testing thrusters under vacuum provide their own challenges. To address the complex measurement requirements, the UK’s National Physical Laboratory (NPL) is working closely with ESTEC to develop a state-of-the-art thrust balance that will provide traceable (to international measurement standards) measurements with a target measurement uncertainty of 1 μN (k = 2) and measurement bandwidth of 0 Hz to 10 Hz. The paper will focus on the design of the instrument, the detrimental effects of external vibration noise on the measurement, how this problem is being addressed and how we determine the measurement uncertainty in the presence of noise.

  4. Superfund and Toxic Release Inventory Sites - SUPERFUND_IDEM_IN: Superfund Program Facilities in Indiana (Indiana Department of Environmental Management, Point Shapefile)

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — SUPERFUND_IDEM_IN is a point shapefile that contains GPS-located Superfund Program facility locations in Indiana, provided by personnel of Indiana Department of...

  5. PENGARUH VARIABEL MAKRO DAN MIKRO TERHADAP NPL PERBANKAN KONVENSIONAL DAN NPF PERBANKAN SYARIAH

    Directory of Open Access Journals (Sweden)

    Zakiyah Dwi Poetry

    2014-03-01

    Full Text Available This research attempts to identify the effect of macro and micro variables to NPL (Non Performing Loan in conventional banking and NPF (Non Performing Financing in syariah banking. The macro and micro variables used in this research are IPI (Industrial Production Index, inflation, exchange rate, SWBI/SBIS (Sertifikat Wadiah Bank Indonesia/Sertifikat Bank Indonesia Syariah, SBI (Sertifikat Bank Indonesia, LDR (Loan to Deposit Ratio, FDR (Financing to Deposit Ratio, and CAR (Capital Adequacy Ratio.This research finds that in short run, there is no significant variables effecting NPL and NPF. In long run significant variables effecting NPL are exchange rate, IPI, inflation, SBI, LDR, and CAR and significant variables effecting NPF are lnER, lnIPI, inflasi, SBIS, FDR_BS, and CAR. According to the IRF result, this research finds that NPF in islamic banking is more stable than NPL in conventional banking to deal with macro and micro variables fluctuation. According to FEVD variables affecting NPL in conventional banking are inflation and SBI; variable affecting NPF in syariah banking is only FDR.JEL Classification: D81,G21Keywords: Non Performing Loan, Non Performing Financing

  6. A cross-site comparison of methods used for hydrogeologic characterization of the Galena-Platteville aquifer in Illinois and Wisconsin, with examples from selected Superfund sites

    Science.gov (United States)

    Kay, Robert T.; Mills, Patrick C.; Dunning, Charles P.; Yeskis, Douglas J.; Ursic, James R.; Vendl, Mark

    2004-01-01

    The effectiveness of 28 methods used to characterize the fractured Galena-Platteville aquifer at eight sites in northern Illinois and Wisconsin is evaluated. Analysis of government databases, previous investigations, topographic maps, aerial photographs, and outcrops was essential to understanding the hydrogeology in the area to be investigated. The effectiveness of surface-geophysical methods depended on site geology. Lithologic logging provided essential information for site characterization. Cores were used for stratigraphy and geotechnical analysis. Natural-gamma logging helped identify the effect of lithology on the location of secondary- permeability features. Caliper logging identified large secondary-permeability features. Neutron logs identified trends in matrix porosity. Acoustic-televiewer logs identified numerous secondary-permeability features and their orientation. Borehole-camera logs also identified a number of secondary-permeability features. Borehole ground-penetrating radar identified lithologic and secondary-permeability features. However, the accuracy and completeness of this method is uncertain. Single-point-resistance, density, and normal resistivity logs were of limited use. Water-level and water-quality data identified flow directions and indicated the horizontal and vertical distribution of aquifer permeability and the depth of the permeable features. Temperature, spontaneous potential, and fluid-resistivity logging identified few secondary-permeability features at some sites and several features at others. Flowmeter logging was the most effective geophysical method for characterizing secondary-permeability features. Aquifer tests provided insight into the permeability distribution, identified hydraulically interconnected features, the presence of heterogeneity and anisotropy, and determined effective porosity. Aquifer heterogeneity prevented calculation of accurate hydraulic properties from some tests. Different methods, such as flowmeter

  7. Delineation of areas having elevated electrical conductivity, orientation and characterization of bedrock fractures, and occurrence of groundwater discharge to surface water at the U.S. Environmental Protection Agency Barite Hill/Nevada Goldfields Superfund site near McCormick, South Carolina

    Science.gov (United States)

    Chapman, Melinda J.; Huffman, Brad A.; McSwain, Kristen Bukowski

    2015-07-16

    During October 2012 through March 2013, the U.S. Geological Survey (USGS), in cooperation with the U.S. Environmental Protection Agency (EPA) Region 4, Superfund Section, conducted borehole geophysical logging, surface geophysical surveys, and water-quality profiling in selected wells and areas to characterize or delineate the extent of elevated subsurface electrical conductivity at the EPA Barite Hill/Nevada Goldfields Superfund site near McCormick, South Carolina. Elevated electrical conductivity measured at the site may be related to native rock materials, waste rock disposal areas used in past operations, and (or) groundwater having elevated dissolved solids (primarily metals and major ions) related to waste migration. Five shallow screened wells and four open-borehole bedrock wells were logged by using a suite of borehole tools, and downhole water-quality profiles were recorded in two additional wells. Well depths ranged from about 26 to 300 feet below land surface. Surface geophysical surveys based on frequency-domain electromagnetic and distributed temperature sensing (DTS) techniques were used to identify areas of elevated electrical conductivity (Earth materials and groundwater) and potential high dissolved solids in groundwater and surface water on land and in areas along the northern unnamed tributary at the site.

  8. An Analysis of State-Owned Banks' Behavior in NPL Disposition

    Institute of Scientific and Technical Information of China (English)

    HuiPeng; YuluChen

    2005-01-01

    This paper examines the phenomenon whereby state-owned banks in China tend to not only reduce their non-performing loans(NPLs ) through accepting settled assets, but also overvalue and delay liquidating settled assets. The results imply that the state-owned banks exhibit an obvious book loss aversion behavior when disposing their NPLs, i.e. they minimize book loss and hide real credit loss by settling their NPLs with overvalued assets. This paper suggests that this results mainly from improper regulations, weak financial strength, and over-restrictions on NPL disposition. Since introducing a valuation allowance on settled assets, as suggested by the regulatory body, will not produce the desired effect, this paper proposes that a performance measurement and penalty mechanism based on non-performin gassets instead of NPLs will change the banks' attitude towards NPL-asset settlement. In addition, a new internal control method governing the entire process from settlement to liquidation is also suggested.

  9. NPL Cs fountain frequency standards and the quest for the ultimate accuracy

    Science.gov (United States)

    Szymaniec, K.; Lea, S. N.; Gibble, K.; Park, S. E.; Liu, K.; Głowacki, P.

    2016-06-01

    NPL operates a system of two primary caesium fountain clocks consisting of a fully characterised standard NPL-CsF2 together with a new standard NPL-CsF3, which has recently become operational. Both fountains feature a single-stage vapour-loaded magneto-optical trap as the source of cold atoms and an approximate cancellation of the potentially large cold collision frequency shift. As a result, the collision-shift type-B uncertainty is less than 10-16. Subsequently, more subtle systematic effects, including the frequency shifts from distributed cavity phase, microwave lensing and collisions with background gas have also been evaluated at the level of 10-16 or below. Now, as several systematic effects contribute to the fountains’ uncertainty budgets similarly, further significant improvement of their accuracies is expected to be even more difficult. The short-term stability of these standards is also a significant factor limiting the overall precision as many days or even weeks of averaging is required for the type-A statistical uncertainty to approach the declared type-B systematic uncertainty. Going forward, further improvements in the reliability and robustness of operation of fountain standards is one of our priorities.

  10. SITE COMPREHENSIVE LISTING (CERCLIS) - Contaminants at CERCLIS (Superfund) Sites

    Data.gov (United States)

    U.S. Environmental Protection Agency — Contaminants at Comprehensive Environmental Response, Compensation and Liability Information System (CERCLIS) (Superfund) Sites - The CERCLIS Public Access Database...

  11. SITE COMPREHENSIVE LISTING (CERCLIS) (Superfund) - Responsible Parties at CERCLIS Sites

    Data.gov (United States)

    U.S. Environmental Protection Agency — Responsible Parties at CERCLIS Sites - The Comprehensive Environmental Response, Compensation and Liability Information System (CERCLIS) (Superfund) Public Access...

  12. Superfund Training/Tech Transfer

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes a collection of information resources, training, and other media related to hazardous waste site cleanup and characterization. A major part of...

  13. Remediation of the Wells G & H Superfund Site, Woburn, Massachusetts.

    Science.gov (United States)

    Bair, E Scott; Metheny, Maura A

    2002-01-01

    Remediation of ground water and soil contamination at the Wells G & H Superfund Site, Woburn, Massachusetts, uses technologies that reflect differences in hydrogeologic settings, concentrations of volatile organic compounds (VOCs), and costs of treatment. The poorly permeable glacial materials that overlie fractured bedrock at the W.R. Grace property necessitate use of closely spaced recovery wells. Contaminated ground water is treated with hydrogen peroxide and ultraviolet (UV) oxidation. At UniFirst, a deep well completed in fractured bedrock removes contaminated ground water, which is treated by hydrogen peroxide, UV oxidation, and granular activated carbon (GAC). The remediation system at Wildwood integrates air sparging, soil-vapor extraction, and ground water pumping. Air stripping and GAC are used to treat contaminated water; GAC is used to treat contaminated air. New England Plastics (NEP) uses air sparging and soil-vapor extraction to remove VOCs from the unsaturated zone and shallow ground water. Contaminated air and water are treated using separate GAC systems. After nine years of operation at W.R. Grace and UniFirst, 30 and 786 kg, respectively, of VOCs have been removed. In three years of operation, 866 kg of VOCs have been removed at Wildwood. In 15 months of operation, 36 kg of VOCs were removed at NEP. Characterization work continues at the Olympia Nominee Trust, Whitney Barrel, Murphy Waste Oil, and Aberjona Auto Parts properties. Risk assessments are being finalized that address heavy metals in the floodplain sediments along the Aberjona River that are mobilized from the Industri-Plex Superfund Site located a few miles upstream.

  14. Biomonitoring for metal contamination near two Superfund sites in Woburn, Massachusetts, using phytochelatins

    Energy Technology Data Exchange (ETDEWEB)

    Gawel, James E.; Hemond, Harold F

    2004-09-01

    Characterizing the spatial extent of groundwater metal contamination traditionally requires installing sampling wells, an expensive and time-consuming process in urban areas. Moreover, extrapolating biotic effects from metal concentrations alone is problematic, making ecological risk assessment difficult. Our study is the first to examine the use of phytochelatin measurements in tree leaves for delimiting biological metal stress in shallow, metal-contaminated groundwater systems. Three tree species (Rhamnus frangula, Acer platanoides, and Betula populifolia) growing above the shallow groundwater aquifer of the Aberjona River watershed in Woburn, Massachusetts, display a pattern of phytochelatin production consistent with known sources of metal contamination and groundwater flow direction near the Industri-Plex Superfund site. Results also suggest the existence of a second area of contaminated groundwater and elevated metal stress near the Wells G and H Superfund site downstream, in agreement with a recent EPA ecological risk assessment. Possible contamination pathways at this site are discussed.

  15. Analysis of Factors influence Non Performing Loan (NPL) at Go Public Bank at Indonesia Stock Exchange

    OpenAIRE

    Sitorus, Vera Yohana

    2015-01-01

    This research entitled “Analysis of Factors influence Non Performing Loan (NPL) at Go Public Bank at Indonesia Stock Exchange”. This research aims to respond any questions about factors influence the Non Performing Loan at the go public bank at Indonesia Stock Exchange. The bad loan is always found in banking loan activity. Therefore the bank always minimizes the bad loan to fulfill the requirement of Central Bank as the bank supervisors. The bad loan is total debt loan plus the doubt loan an...

  16. Perbandingan NPL, LDR, CAR, ROA, dan BOPO Antara Bank BNI Dan Bank BUMN Lain

    Directory of Open Access Journals (Sweden)

    Tri Wahyuningsih

    2016-09-01

    Full Text Available This study aims to analyze the differences in financial performance of Bank BNI and other BUMN Banks by the measuring the ratio of Non Performing Loan (NPL, Loan to Deposit Ratio (LDR, Adecuacy Capital Ratio (CAR, Return on Assets (ROA and BOPO. The study was conducted by using descriptive analysis method. The results of this study explained that the performance NPL, LDR, and Bank BNI's CAR on average during the past eight semesters was still better than BUMN Banks on average, while the performance of ROA and BOPO remained below the average Revenues and Operating Expenses of Operational Income of  Bank BUMN. The results also showed that all BUMN banks still showed good and healthy performance and in accordance with the provisions set by Bank Indonesia. This study also presented the strategy undertaken by Bank BNI to improve its financial performance, that is, the business synergy of all units unit, growth in good-quality assets, optimization of the customer engagement, strengthening the network and develop alliances, optimization of existing resources and simplification of processes, and enhancing customer experiences through improving processes and business models to  digital banking. Keywords: Non-Performing Loans, Loan to Deposit Ratio, Capital Adequacy Ratio, Return on Assets, Revenues and Operating Expenses of Operational Income, Bank BNI, Bank BUMN.

  17. Structural Finite Element Model Updating Using Vibration Tests and Modal Analysis for NPL footbridge - SHM demonstrator

    Science.gov (United States)

    Barton, E.; Middleton, C.; Koo, K.; Crocker, L.; Brownjohn, J.

    2011-07-01

    This paper presents the results from collaboration between the National Physical Laboratory (NPL) and the University of Sheffield on an ongoing research project at NPL. A 50 year old reinforced concrete footbridge has been converted to a full scale structural health monitoring (SHM) demonstrator. The structure is monitored using a variety of techniques; however, interrelating results and converting data to knowledge are not possible without a reliable numerical model. During the first stage of the project, the work concentrated on static loading and an FE model of the undamaged bridge was created, and updated, under specified static loading and temperature conditions. This model was found to accurately represent the response under static loading and it was used to identify locations for sensor installation. The next stage involves the evaluation of repair/strengthening patches under both static and dynamic loading. Therefore, before deliberately introducing significant damage, the first set of dynamic tests was conducted and modal properties were estimated. The measured modal properties did not match the modal analysis from the statically updated FE model; it was clear that the existing model required updating. This paper introduces the results of the dynamic testing and model updating. It is shown that the structure exhibits large non-linear, amplitude dependant characteristics. This creates a difficult updating process, but we attempt to produce the best linear representation of the structure. A sensitivity analysis is performed to determine the most sensitive locations for planned damage/repair scenarios and is used to decide whether additional sensors will be necessary.

  18. Structural Finite Element Model Updating Using Vibration Tests and Modal Analysis for NPL footbridge - SHM demonstrator

    Energy Technology Data Exchange (ETDEWEB)

    Barton, E; Crocker, L [Structural health monitoring, National Physical Laboratory, Hampton Road, Teddington, Middlesex, TW11 0LW (United Kingdom); Middleton, C; Koo, K; Brownjohn, J, E-mail: elena.barton@npl.co.uk, E-mail: C.J.Middleton@sheffield.ac.uk, E-mail: k.koo@sheffield.ac.uk, E-mail: louise.crocker@npl.co.uk, E-mail: j.brownjohn@sheffield.ac.uk [University of Sheffield, Department of Civil and Structural Engineering, Vibration Engineering Research Section, Sir Frederick Mappin Building Mappin Street, Sheffield, S1 3JD (United Kingdom)

    2011-07-19

    This paper presents the results from collaboration between the National Physical Laboratory (NPL) and the University of Sheffield on an ongoing research project at NPL. A 50 year old reinforced concrete footbridge has been converted to a full scale structural health monitoring (SHM) demonstrator. The structure is monitored using a variety of techniques; however, interrelating results and converting data to knowledge are not possible without a reliable numerical model. During the first stage of the project, the work concentrated on static loading and an FE model of the undamaged bridge was created, and updated, under specified static loading and temperature conditions. This model was found to accurately represent the response under static loading and it was used to identify locations for sensor installation. The next stage involves the evaluation of repair/strengthening patches under both static and dynamic loading. Therefore, before deliberately introducing significant damage, the first set of dynamic tests was conducted and modal properties were estimated. The measured modal properties did not match the modal analysis from the statically updated FE model; it was clear that the existing model required updating. This paper introduces the results of the dynamic testing and model updating. It is shown that the structure exhibits large non-linear, amplitude dependant characteristics. This creates a difficult updating process, but we attempt to produce the best linear representation of the structure. A sensitivity analysis is performed to determine the most sensitive locations for planned damage/repair scenarios and is used to decide whether additional sensors will be necessary.

  19. Feasibility study for the United Heckathorn Superfund Site, Richmond, California

    Energy Technology Data Exchange (ETDEWEB)

    Lincoff, A.H. [US Environmental Protection Agency, San Francisco, CA (United States). Region IX; Costan, G.P.; Montgomery, M.S.; White, P.J. [Pacific Northwest Lab., Richland, WA (United States)

    1994-07-01

    The United Heckathom Superfund Site in Richmond, California, was used to formulate pesticides from approximately 1947 to 1966. Soils at the site and sediments in the harbor were contaminated with various chlorinated pesticides, primarily DDT, as a result of these activities. The US Environmental Protection Agency listed the site on the Superfund National Priorities List in 1990. This document is part of the Remedial Investigation and Feasibility Study phase of the Superfund response, which will provide the basis for selection of a final remedy that will protect human health and the environment and achieve compliance with federal and state envirorunental laws.

  20. EPA Region 2 SEMS_CERCLIS Sites All [R2] and SEMS_CERCLIS Sites NPL [R2] GIS Layers

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Region 2 SEMS_CERCLIS Sites All [R2] GIS layer contains unique Superfund Enterprise Management System (SEMS) site records. These records have the following...

  1. Report: Remedial Project Manager Turnover at Superfund Sites

    Science.gov (United States)

    Report #2001-M-000015, June 15, 2001. We determined that EPA Region III did not have formal procedures in place to mitigate continuity problems caused by turnover of EPA personnel in the Superfund program.

  2. Mcnp calculation of neutron scatter in the Main Bay of the Chadwick Building, NPL

    Energy Technology Data Exchange (ETDEWEB)

    Naismith, O.F.; Thomas, D.J.

    1996-02-01

    The Monte Carlo neutron transport code MCNP has been used to calculate the room and air scattered neutron component at 75 cm from a radionuclide source located at the center of the low-scatter area in the Chadwick Building, Bldg. 47, at National Physical Laboratory (NPL). This is the standard distance used for calibrating personal dosemeters, and the calculation provides information for correcting the response of dosemeters to the scattered radiation. Calculations were performed for both an Am-Be and a (252)Cf source. These measurements revealed that the model used for features within the low-scatter area needs to be refined for calculating scatter at distances further from the source than 75 cm.

  3. Syringe calibration factors and volume correction factors for the NPL secondary standard radionuclide calibrator

    CERN Document Server

    Tyler, D K

    2002-01-01

    The activity assay of a radiopharmaceutical administration to a patient is normally achieved via the use of a radionuclide calibrator. Because of the different geometries and elemental compositions between plastic syringes and glass vials, the calibration factors for syringes may well be significantly different from those for the glass containers. The magnitude of these differences depends on the energies of the emitted photons. For some radionuclides variations have been observed of 70 %, it is therefore important to recalibrate for syringes or use syringe calibration factors. Calibration factors and volume correction factors have been derived for the NPL secondary standard radionuclide calibrator, for a variety of commonly used syringes and needles, for the most commonly used medical radionuclide.

  4. 77 FR 13603 - Anniston PCB Superfund Site; Anniston, Calhoun County, AL; Correction

    Science.gov (United States)

    2012-03-07

    ... AGENCY Anniston PCB Superfund Site; Anniston, Calhoun County, AL; Correction AGENCY: Environmental... concerning the Anniston PCB Superfund Site located in Anniston. The settlement is not an amendment, but a new... name Anniston PCB by one of the following methods:...

  5. 78 FR 729 - Ellman Battery Superfund Site; Orlando, Orange County, FL; Notice of Settlement

    Science.gov (United States)

    2013-01-04

    ... From the Federal Register Online via the Government Publishing Office ENVIRONMENTAL PROTECTION AGENCY Ellman Battery Superfund Site; Orlando, Orange County, FL; Notice of Settlement AGENCY... concerning a previous Removal Action at the Ellman Battery Superfund Site located in Orlando, Orange...

  6. 78 FR 13056 - Proposed CERCLA Administrative Cost Recovery Settlement; in re: Factory H Superfund Site, Meriden...

    Science.gov (United States)

    2013-02-26

    ... AGENCY Proposed CERCLA Administrative Cost Recovery Settlement; in re: Factory H Superfund Site, Meriden...)(1) concerning the Factory H Superfund Site in Meriden, Connecticut (``Site'') with the following... refer to the Factory H Superfund Site, U.S. EPA Docket No. CERCLA-01-2012-0112. FOR FURTHER...

  7. 75 FR 53694 - Florida Petroleum Reprocessors Superfund Site; Davie, Broward County, FL; Notice of Settlement

    Science.gov (United States)

    2010-09-01

    ...] Florida Petroleum Reprocessors Superfund Site; Davie, Broward County, FL; Notice of Settlement AGENCY... Florida Petroleum Reprocessors Superfund Site located in Davie, Broward County, Florida for publication..., identified by Docket ID No. EPA-RO4- SFUND-2010-0729 or Site name Florida Petroleum Reprocessors Superfund...

  8. 77 FR 8255 - Constitution Road Drum Superfund Site, Atlanta, Dekalb County, GA; Notice of Settlement

    Science.gov (United States)

    2012-02-14

    ... AGENCY Constitution Road Drum Superfund Site, Atlanta, Dekalb County, GA; Notice of Settlement AGENCY... entered into a settlement for past response costs concerning the Constitution Road Drum Superfund Site... available from Ms. Paula V. Painter. Submit your comments by Site name Constitution Road Drum Superfund...

  9. Bilateral comparison of cryogenic radiometers between NPL and UME, linked to the CCPR-S3 supplementary comparison

    Science.gov (United States)

    Goodman, T.

    2016-01-01

    This report presents the results of a bilateral comparison between NPL and UME, which was carried out to establish the unilateral degrees of equivalence for UME with respect to the defined reference value of the CCPR S3 supplementary comparison of cryogenic radiometers using silicon trap detectors as transfer devices. In accordance with the protocol for the CCPR S3 comparison, UME was asked to calibrate a set of NPL supplied silicon trap transfer detectors at a series of laser wavelengths; UME chose to measure at 514.5 nm and 632.8 nm. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCPR, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

  10. Consensus evaluation of radioactivity-in-soil reference materials in the context of an NPL Environmental Radioactivity Proficiency Test Exercise.

    Science.gov (United States)

    Dean, Julian; Collins, Sean; Garcia Miranda, Maria; Ivanov, Peter; Larijani, Cyrus; Woods, Selina

    2017-01-25

    The development of two radioactivity-in-soil reference materials is described - one for peat and one for soil with high sand content. Each bulk material was processed, subdivided and measured before being sent to participants in an NPL Environmental Radioactivity Proficiency Test Exercise. Activity concentrations of radionuclides in each material were determined by 'consensus' evaluations of participants' results using two weighted mean methods. The project demonstrated the use of such exercises in delivering reference materials to the user community.

  11. Field analytical support during Superfund site remediation

    Energy Technology Data Exchange (ETDEWEB)

    Goldschmidt, W.L.; Catherman, D.R. [Environmental Resources Management, Inc., Exton, PA (United States)

    1995-12-31

    ERM-FAST{reg_sign} Services has provided cost-effective and critical field analytical support for a wide variety of investigatory and remedial projects over the past four years. Two recent projects involving soils remediation at Superfund sites exemplify the power of real time field analytical support in reducing time and expense during a project`s remedial phase. ERM-FAST on-site analytical facilities were able to meet, in a real time scenario, all data quality objectives (DQOs), all regulatory agency requirements, and satisfied the client`s needs. ERM-FAST made this possible through the development of unique analytical strategies, the proper selection of analytical technologies, and by streamlining the analytical methodologies. Both of these remedial efforts offer illustrations of the effectiveness of field analysis for vastly differing site contaminants. This case study focuses on the use of portable Gas Chromatography (GC) instrumentation as a tool for providing analytical support during a CERCLA site remediation program. The project discussed provides an example of how low cost portable analytical instrumentation can be utilized in a field setting to meet analytical DQOs consistent with CERCLA compliance and to meet the requirements for remedial activity cost control. Substantial savings were realized both by reducing total project analytical cost, and by efficient and effective process and schedule management.

  12. Precise time and frequency intercomparison between NPL, India and PTB, Federal Republic of Germany via satellite symphonie-1

    Science.gov (United States)

    Mathur, B. S.; Banerjee, P.; Sood, P. C.; Saxena, M.; Kumar, N.; Suri, A. K.

    1981-01-01

    A time and frequency intercomparison experiment conducted using Earth stations in New Delhi, India and Raisting, FRG is described. The NPL clock was placed at New Delhi Earth Station and the Raisting Clock was calibrated with PTB/Primary standard via LORAN-C and travelling clocks. The random uncertainity of time comparisons, represented by two sample Allan Variance sigma (30 seconds), was less than 10 nanoseconds. The relative frequency difference between the NPL and Raisting Clocks, SNPL, RAIS, as measured over the 44 days period was found to be -15.7 x 10 to the -13th power. The relative frequency difference between PTB Primary Standard and Raisting Clock, SPTB, RAIS, during this period, was measured to be -22.8 x 10 to the -13th power. The relative frequency difference between NPL clock and PTB Primary Standard, SNPL, PTB, thus, is +7.1 x 10 to the -13th power. The clock rate (UTC, India) of +7.1 + or - 0.5 x 10 to the -13th power, agrees well with that obtained via VLF phase measurements over one year period and with USNO travelling clock time comparisons made in September, 1980.

  13. Frequency comparison of ${}^{171}$Yb${}^+$ ion optical clocks at PTB and NPL via GPS PPP

    CERN Document Server

    Leute, J; Lipphardt, B; Tamm, Chr; Nisbet-Jones, P B R; King, S A; Godun, R M; Jones, J M; Margolis, H S; Whibberley, P B; Wallin, A; Merimaa, M; Gill, P; Peik, E

    2015-01-01

    We used Precise Point Positioning, a well-established GPS carrier-phase frequency transfer method to perform a direct remote comparison of two optical frequency standards based on single laser-cooled $^{171}$Yb$^+$ ions operated at NPL, UK and PTB, Germany. At both institutes an active hydrogen maser serves as a flywheel oscillator; it is connected to a GPS receiver as an external frequency reference and compared simultaneously to a realization of the unperturbed frequency of the ${{}^2S_{1/2}(F=0)-{}^2D_{3/2}(F=2)}$ electric quadrupole transition in ${}^{171}$Yb${}^+$ via an optical femtosecond frequency comb. To profit from long coherent GPS link measurements we extrapolate over the various data gaps in the optical clock to maser comparisons which introduces maser noise to the frequency comparison but improves the uncertainty from the GPS link. We determined the total statistical uncertainty consisting of the GPS link uncertainty and the extrapolation uncertainties for several extrapolation schemes. Using t...

  14. SUPERFUND GROUND WATER ISSUE - ACCURACY OF DEPTH TO WATER MEASUREMENTS

    Science.gov (United States)

    Accuracy of depth to water measurements is an issue identified by the Forum as a concern of Superfund decision-makers as they attempt to determine directions of ground-water flow, areas of recharge of discharge, the hydraulic characteristics of aquifers, or the effects of manmade...

  15. Analisis Faktor-faktor yang Mempengaruhi Terjadinya Non Performing Loan (NPL) pada Perbankan yang Go Public di Bursa Efek Indonesia

    OpenAIRE

    Sitorus, Vera Yohana

    2013-01-01

    This research entitled “Analysis of Factors influence Non Performing Loan (NPL) at Go Public Bank at Indonesia Stock Exchange”. This research aims to respond any questions about factors influence the Non Performing Loan at the go public bank at Indonesia Stock Exchange. The bad loan is always found in banking loan activity. Therefore the bank always minimizes the bad loan to fulfill the requirement of Central Bank as the bank supervisors. The bad loan is total debt loan plus the doubt loan an...

  16. Raman spectroscopy of efflorescent sulfate salts from Iron Mountain Mine Superfund Site, California.

    Science.gov (United States)

    Sobron, Pablo; Alpers, Charles N

    2013-03-01

    The Iron Mountain Mine Superfund Site near Redding, California, is a massive sulfide ore deposit that was mined for iron, silver, gold, copper, zinc, and pyrite intermittently for nearly 100 years. As a result, both water and air reached the sulfide deposits deep within the mountain, producing acid mine drainage consisting of sulfuric acid and heavy metals from the ore. Particularly, the drainage water from the Richmond Mine at Iron Mountain is among the most acidic waters naturally found on Earth. The mineralogy at Iron Mountain can serve as a proxy for understanding sulfate formation on Mars. Selected sulfate efflorescent salts from Iron Mountain, formed from extremely acidic waters via drainage from sulfide mining, have been characterized by means of Raman spectroscopy. Gypsum, ferricopiapite, copiapite, melanterite, coquimbite, and voltaite are found within the samples. This work has implications for Mars mineralogical and geochemical investigations as well as for terrestrial environmental investigations related to acid mine drainage contamination.

  17. Raman spectroscopy of efflorescent sulfate salts from Iron Mountain Mine Superfund Site, California

    Science.gov (United States)

    Sobron, Pablo; Alpers, Charles N.

    2013-01-01

    The Iron Mountain Mine Superfund Site near Redding, California, is a massive sulfide ore deposit that was mined for iron, silver, gold, copper, zinc, and pyrite intermittently for nearly 100 years. As a result, both water and air reached the sulfide deposits deep within the mountain, producing acid mine drainage consisting of sulfuric acid and heavy metals from the ore. Particularly, the drainage water from the Richmond Mine at Iron Mountain is among the most acidic waters naturally found on Earth. The mineralogy at Iron Mountain can serve as a proxy for understanding sulfate formation on Mars. Selected sulfate efflorescent salts from Iron Mountain, formed from extremely acidic waters via drainage from sulfide mining, have been characterized by means of Raman spectroscopy. Gypsum, ferricopiapite, copiapite, melanterite, coquimbite, and voltaite are found within the samples. This work has implications for Mars mineralogical and geochemical investigations as well as for terrestrial environmental investigations related to acid mine drainage contamination.

  18. Surface geophysics and porewater evaluation at the Lower Darby Creek Area Superfund Site, Philadelphia, Pennsylvania, 2013

    Science.gov (United States)

    Walker, Charles W.; Degnan, James R.; Brayton, Michael J.; Cruz, Roberto M.; Lorah, Michelle M.

    2015-01-01

    In cooperation with the U.S. Environmental Protection Agency (EPA), Region 3, the U.S. Geological Survey (USGS) is participating in an ongoing study to aid in the identification of subsurface heterogeneities that may act as preferential pathways for contaminant transport in and around the Lower Darby Creek Area (LDCA) Superfund Site, Philadelphia Pa. Lower Darby Creek, which flows into the Delaware River, borders the western part of the former landfill site. In 2013, the USGS conducted surface geophysics measurements and stream porewater sampling to provide additional data for EPA’s site characterization. This report contains data collected from field measurements of direct current (DC) resistivity, frequency-domain electromagnetic (FDEM) surveys, and stream porewater specific conductance (SC).

  19. 77 FR 11533 - Anniston PCB Superfund Site, Anniston, Calhoun County, Alabama; Notice of Amended Settlement

    Science.gov (United States)

    2012-02-27

    ... AGENCY Anniston PCB Superfund Site, Anniston, Calhoun County, Alabama; Notice of Amended Settlement... Agency has entered into a settlement for past response costs concerning the Anniston PCB Superfund Site... available from Ms. Paula V. Painter. Submit your comments by Site name Anniston PCB by one of the...

  20. 75 FR 81269 - Ward Transformer Superfund Site Raleigh, Wake County, NC; Notice of Settlements

    Science.gov (United States)

    2010-12-27

    ... AGENCY Ward Transformer Superfund Site Raleigh, Wake County, NC; Notice of Settlements AGENCY... Ward Transformer Superfund Site located in Raleigh, Wake County, North Carolina for publication. DATES... your comments, identified by Docket ID No. EPA-RO4- SFUND-2010-1053 or Site name Ward...

  1. 78 FR 14543 - Ward Transformer Superfund Site; Raleigh, Wake County, NC; Notice of Settlement

    Science.gov (United States)

    2013-03-06

    ... AGENCY Ward Transformer Superfund Site; Raleigh, Wake County, NC; Notice of Settlement AGENCY... Agency has entered into a settlement at the Ward Transformer Superfund Site located in Raleigh, Wake... EPA Region 4 contact Ms. Paula V. Painter. Submit your comments by Site name Ward...

  2. Remediation System Evaluation, McCormick and Baxter Superfund SiteRemediation System Evaluation, McCormick and Baxter Superfund Site

    Science.gov (United States)

    The McCormick and Baxter Creosoting Company, Portland Plant, Superfund Site is located adjacent tothe Willamette River in Portland, Oregon and addresses contamination of soil, groundwater, and riversediments stemming from creosoting operations...

  3. Cleanups In My Community (CIMC) - Federal facilities that are also Superfund sites, National Layer

    Data.gov (United States)

    U.S. Environmental Protection Agency — Federal facilities are properties owned by the federal government. This data layer provides access to Federal facilities that are Superfund sites as part of the CIMC...

  4. Letter to Silverton and San Juan County Regarding Potential Superfund Listing

    Science.gov (United States)

    Feb. 12, 2016 Update: EPA added a letter to the Town of Silverton and San Juan County regarding the agency’s commitment to the Town and County’s involvement during a potential Superfund listing process.

  5. Grain Handling Facility at Freeman, Washington Proposed to Superfund Cleanup List

    Science.gov (United States)

    (March 24, 2015 - Seattle) The U.S. Environmental Protection Agency is proposing to add the Grain Handling Facility at Freeman, in Spokane County, Washington, to the Superfund National Priorities List. The proposed listing includes a 60-day public comment

  6. Preliminary estimate of natural resource damage : Rocky Mountain Arsenal Superfund Site

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This is a preliminary estimate of natural resource damages associated with uncontrolled release of hazardous materials at the Rocky Mountain Arsenal Superfund Site...

  7. Remediation System Evaluation, Streamlined Remediation System Evaluation (RSE-Lite), Circuitron Corporation Superfund Site

    Science.gov (United States)

    The Circuitron Corporation Superfund Site is located at 82 Milbar Boulevard, East Farmingdale, Suffolk County, New York. The site is situated on a 1-acre lot in an industrial/commercial area that is surrounded by similar small manufacturers...

  8. Cleanups In My Community (CIMC) - Base Realignment and Closure (BRAC) Superfund Sites, National Layer

    Data.gov (United States)

    U.S. Environmental Protection Agency — This data layer provides access to Base Realignment and Closure (BRAC) Superfund Sites as part of the CIMC web service. EPA works with DoD to facilitate the reuse...

  9. EPA, 12 Private Entities Agree to Remove Contamination and Conduct Study at Metro Container Superfund Site

    Science.gov (United States)

    PHILADELPHIA (October 21, 2015) -- The U.S. Environmental Protection Agency and 12 private entities have agreed to settle on actions that will lead to increased environmental protection at the Metro Container Superfund Site in Trainer, Delaware Co.,

  10. Report: EPA’s Distribution of Superfund Human Resources Does Not Support Current Regional Workload

    Science.gov (United States)

    Report #17-P-0397, September 19, 2017. Due to insufficient human resources to cover all Superfund site work, some regions have had to slow down or discontinue their efforts to protect human health and the environment.

  11. Comparison of the radiation temperature scales of the PTB and the NPL in the temperature range from -57 °C to 50 °C

    Science.gov (United States)

    Gutschwager, B.; Theocharous, E.; Monte, C.; Adibekyan, A.; Reiniger, M.; Fox, N. P.; Hollandt, J.

    2013-06-01

    Blackbody sources at near-ambient temperature are routinely used to calibrate infrared instruments used in remote sensing and thermal imaging applications to measure radiance and radiation temperature. The measured temperature of the blackbody and its calculated effective emissivity determine its radiance and radiation temperature according to Planck's law. The temperature measurement is generally accomplished with a contact thermometer which is calibrated against the International Temperature Scale (ITS-90). The ammonia heat-pipe blackbody of the Physikalisch-Technische Bundesanstalt (PTB) in Germany is a primary source standard working over a wide spectral range with low uncertainties, i.e. less than 33 mK at 10 µm in the temperature range from -60 °C to 50 °C. A more direct method of absolute radiance measurement is to use an absolutely calibrated radiometer, calibrated against a primary detector standard, the cryogenic radiometer. AMBER (Absolute Measurements of Blackbody Emitted Radiance) is an absolutely calibrated radiometer of the Optical Measurement Group of the National Physical Laboratory (NPL) in the UK which was specially designed to determine the radiance and hence the radiation temperature of near-ambient-temperature blackbodies. When AMBER is operated at short wavelengths, where photodetectors offering good long-term stability exist, it derives its traceability through the cryogenic radiometer. However, available photodetectors operating in the 8 µm to 12 µm wavelength range offer poor long-term stability so when AMBER is used in this wavelength range, the NPL radiance temperature scale is based on a gallium fixed-point blackbody operating at 29.7646 °C (ITS-90). At other radiance temperatures, the NPL scale also relies on the gallium fixed-point blackbody but requires the calibration of the relative spectral irradiance responsivity of the AMBER radiometer (done against NPL spectral responsivity standards), measurement of the radiometric zero

  12. Investigation of total and hexavalent chromium in filtered and unfiltered groundwater samples at the Tucson International Airport Superfund Site

    Science.gov (United States)

    Tillman, Fred; McCleskey, R. Blaine; Hermosillo, Edyth

    2016-01-01

    Potential health effects from hexavalent chromium in groundwater have recently become a concern to regulators at the Tucson International Airport Area Superfund site. In 2016, the U.S. Geological Survey sampled 46 wells in the area to characterize the nature and extent of chromium in groundwater, to understand what proportion of total chromium is in the hexavalent state, and to determine if substantial differences are present between filtered and unfiltered chromium concentrations. Results indicate detectable chromium concentrations in all wells, over 75 % of total chromium is in the hexavalent state in a majority of wells, and filtered and unfiltered results differ substantially in only a few high-turbidity total chromium samples.

  13. Cdc48 and cofactors Npl4-Ufd1 are important for G1 progression during heat stress by maintaining cell wall integrity in Saccharomyces cerevisiae.

    Directory of Open Access Journals (Sweden)

    Meng-Ti Hsieh

    Full Text Available The ubiquitin-selective chaperone Cdc48, a member of the AAA (ATPase Associated with various cellular Activities ATPase superfamily, is involved in many processes, including endoplasmic reticulum-associated degradation (ERAD, ubiquitin- and proteasome-mediated protein degradation, and mitosis. Although Cdc48 was originally isolated as a cell cycle mutant in the budding yeast Saccharomyces cerevisiae, its cell cycle functions have not been well appreciated. We found that temperature-sensitive cdc48-3 mutant is largely arrested at mitosis at 37°C, whereas the mutant is also delayed in G1 progression at 38.5°C. Reporter assays show that the promoter activity of G1 cyclin CLN1, but not CLN2, is reduced in cdc48-3 at 38.5°C. The cofactor npl4-1 and ufd1-2 mutants also exhibit G1 delay and reduced CLN1 promoter activity at 38.5°C, suggesting that Npl4-Ufd1 complex mediates the function of Cdc48 at G1. The G1 delay of cdc48-3 at 38.5°C is a consequence of cell wall defect that over-activates Mpk1, a MAPK family member important for cell wall integrity in response to stress conditions including heat shock. cdc48-3 is hypersensitive to cell wall perturbing agents and is synthetic-sick with mutations in the cell wall integrity signaling pathway. Our results suggest that the cell wall defect in cdc48-3 is exacerbated by heat shock, which sustains Mpk1 activity to block G1 progression. Thus, Cdc48-Npl4-Ufd1 is important for the maintenance of cell wall integrity in order for normal cell growth and division.

  14. 76 FR 24479 - In the Matter of the Taylor Lumber and Treating Superfund Site, Sheridan, Oregon, Amendment to...

    Science.gov (United States)

    2011-05-02

    ... AGENCY In the Matter of the Taylor Lumber and Treating Superfund Site, Sheridan, Oregon, Amendment to... with PWPO provided a covenant not to sue for response costs at the Taylor Lumber and Treating Site... should reference the Taylor Lumber and Treating Superfund Site in Sheridan, Oregon, EPA Docket No....

  15. 78 FR 47317 - Ore Knob Mine Superfund Site; Laurel Springs, Ashe County, North Carolina; Notice of Settlement

    Science.gov (United States)

    2013-08-05

    ... AGENCY Ore Knob Mine Superfund Site; Laurel Springs, Ashe County, North Carolina; Notice of Settlement... Protection Agency has entered into a settlement with Herbert N. Francis concerning the Ore Knob Mine... comments by site name ``Ore Knob Mine Superfund Site'' by one of the following methods:...

  16. SUPERFUND TREATABILITY CLEARINGHOUSE: BDAT INCINERATION OF CERCLA SARMS AT THE JOHN ZINK COMPANY TEST FACILITY (FINAL PROJECT REPORT)

    Science.gov (United States)

    This report presents the results of a treatability study of rotary kiln incineration of a synthetic "Superfund soil" bearing a wide range of chemical contaminants typically occurring at Superfund sites. This surrogate soil is referred to as a synthetic analytical reference ...

  17. Comparison of air kerma standards of LNE-LNHB and NPL for 192Ir HDR brachytherapy sources: EUROMET project no 814.

    Science.gov (United States)

    Douysset, Guilhem; Sander, Thorsten; Gouriou, Jean; Nutbrown, Rebecca

    2008-03-21

    An indirect comparison has been made in the air kerma standards for high dose rate (HDR) 192Ir brachytherapy sources at the Laboratoire National Henri Becquerel (LNHB) and the National Physical Laboratory (NPL). The measurements were carried out at both laboratories between November and December 2004. The comparison was based on measurements using well-type transfer ionization chambers and two different source types, Nucletron microSelectron HDR Classic and version 2. The results show the reported calibration coefficients to agree within 0.47% to 0.63%, which is within the overall standard uncertainty of 0.65% reported by both laboratories at the time of this comparison. Following this comparison, some of the NPL primary standard correction factors were re-evaluated resulting in a change of +0.17% in the overall correction factor. The new factor was implemented in May 2006. Applying the revised chamber factor to the measurements reported in this comparison report will reduce the difference between the two standards by 0.17%.

  18. Sustainable exposure prevention through innovative detection and remediation technologies from the NIEHS Superfund Research Program.

    Science.gov (United States)

    Henry, Heather F; Suk, William A

    2017-03-01

    Innovative devices and tools for exposure assessment and remediation play an integral role in preventing exposure to hazardous substances. New solutions for detecting and remediating organic, inorganic, and mixtures of contaminants can improve public health as a means of primary prevention. Using a public health prevention model, detection and remediation technologies contribute to primary prevention as tools to identify areas of high risk (e.g. contamination hotspots), to recognize hazards (bioassay tests), and to prevent exposure through contaminant cleanups. Primary prevention success is ultimately governed by the widespread acceptance of the prevention tool. And, in like fashion, detection and remediation technologies must convey technical and sustainability advantages to be adopted for use. Hence, sustainability - economic, environmental, and societal - drives innovation in detection and remediation technology. The National Institute of Health (NIH) National Institute of Environmental Health Sciences (NIEHS) Superfund Research Program (SRP) is mandated to advance innovative detection, remediation, and toxicity screening technology development through grants to universities and small businesses. SRP recognizes the importance of fast, accurate, robust, and advanced detection technologies that allow for portable real-time, on-site characterization, monitoring, and assessment of contaminant concentration and/or toxicity. Advances in non-targeted screening, biological-based assays, passive sampling devices (PSDs), sophisticated modeling approaches, and precision-based analytical tools are making it easier to quickly identify hazardous "hotspots" and, therefore, prevent exposures. Innovation in sustainable remediation uses a variety of approaches: in situ remediation; harnessing the natural catalytic properties of biological processes (such as bioremediation and phytotechnologies); and application of novel materials science (such as nanotechnology, advanced

  19. EPA Proposes to Remove Most of Fulton, Oswego County, New York Site from Superfund List

    Science.gov (United States)

    (New York, N.Y) After cleaning up more than 10,000 cubic yards of contaminated soil and approximately 9 million gallons of contaminated groundwater, the U.S. Environmental Protection Agency is proposing to remove a portion of the Fulton Terminals Superfund

  20. Superfund record of decision (EPA Region 5): Ormet Corporation, Hannibal, OH, September 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-09-12

    The Record of Decision presents the selected remedy for the Ormet Corporation Superfund Site. The purpose of this remedy is to eliminate or reduce contamination in soils, sediments and ground water, and to reduce the risks associated with exposure to contaminated materials. This is the first and final remedy planned for the Site.

  1. Medical costs and lost productivity from health conditions at volatile organic compound-contaminated Superfund sites

    Energy Technology Data Exchange (ETDEWEB)

    Lybarger, J.A.; Spengler, R.F.; Brown, D.R. [Agency for Toxic Substances and Disease Registry, Atlanta, GA (United States). Div. of Health Studies; Lee, R.; Vogt, D.P. [Oak Ridge National Lab., TN (United States)]|[Joint Inst. for Energy and Environment, Oak Ridge, TN (United States); Perhac, R.M. Jr. [Univ. of Tennessee, Knoxville, TN (United States)]|[Joint Inst. for Energy and Environment, Oak Ridge, TN (United States)

    1998-10-01

    This paper estimates the health costs at Superfund sites for conditions associated with volatile organic compounds (VOCs) in drinking water. Health conditions were identified from published literature and registry information as occurring at excess rates in VOC-exposed populations. These health conditions were: (1) some categories of birth defects, (2) urinary tract disorders, (3) diabetes, (4) eczema and skin conditions, (5) anemia, (6) speech and hearing impairments in children under 10 years of age, and (7) stroke. Excess rates were used to estimate the excess number of cases occurring among the total population living within one-half mile of 258 Superfund sites. These sites had evidence of completed human exposure pathways for VOCs in drinking water. For each type of medical condition, an individual`s expected medical costs, long-term care costs, and lost work time due to illness or premature mortality were estimated. Costs were calculated to be approximately $330 million per year, in the absence of any remediation or public health intervention programs. The results indicate the general magnitude of the economic burden associated with a limited number of contaminants at a portion of all Superfund sites, thus suggesting that the burden would be greater than that estimated in this study if all contaminants at all Superfund sites could be taken into account.

  2. Superfund: Interagency Agreements and Improved Project Management Needed to Achieve Cleanup Progress at Key Defense Installations

    Science.gov (United States)

    2010-07-01

    Superfund completing the remedial investigation, which would include a human and ecological risk assessment , feasibility study, proposed plan...EPA said that a human and ecological risk assessment —which would estimate how threatening a hazardous waste site is to human health and the

  3. A General Chemistry Assignment Analyzing Environmental Contamination for the Depue, IL, National Superfund Site

    Science.gov (United States)

    Saslow Gomez, Sarah A.; Faurie-Wisniewski, Danielle; Parsa, Arlen; Spitz, Jeff; Spitz, Jennifer Amdur; Loeb, Nancy C.; Geiger, Franz M.

    2015-01-01

    The classroom exercise outlined here is a self-directed assignment that connects students to the environmental contamination problem surrounding the DePue Superfund site. By connecting chemistry knowledge gained in the classroom with a real-world problem, students are encouraged to personally connect with the problem while simultaneously…

  4. 75 FR 68788 - Ore Knob Mine Superfund Site; Jefferson, Ashe County, North Carolina; Notice of Settlement

    Science.gov (United States)

    2010-11-09

    ... Doc No: 2010-28260] ENVIRONMENTAL PROTECTION AGENCY [Docket EPA-RO4-SFUND-2010-0893, FRL-9223-8] Ore... Protection Agency has entered into a settlement for reimbursement of past response costs concerning the Ore..., identified by Docket ID No. EPA-RO4- SFUND-2010-0893 or Site name Ore Knob Mine Superfund Site by one of...

  5. 77 FR 16548 - Florida Petroleum Reprocessors Superfund Site; Davie, Broward County, FL; Notice of Settlements

    Science.gov (United States)

    2012-03-21

    ...] Florida Petroleum Reprocessors Superfund Site; Davie, Broward County, FL; Notice of Settlements AGENCY... entered into four (4) settlements for past response costs concerning the Florida Petroleum Reprocessors... settlement are available from Ms. Paula V. Painter. Submit your comments by Site name Florida Petroleum...

  6. SUPERFUND TREATABILITY CLEARINGHOUSE: CERCLA BDAT SARM PREPARATION AND RESULTS OF PHYSICAL SOILS WASHING EXPERIMENTS (FINAL REPORT)

    Science.gov (United States)

    This study reports on the results of work preparing 30,000 Ibs of SARM or synthetic analytical reference matrix, a surrogate Superfund soil containing a vide range of contaminants. It also reports the results ©f bench scale treatability experiments designed to simulate the EP...

  7. A General Chemistry Assignment Analyzing Environmental Contamination for the Depue, IL, National Superfund Site

    Science.gov (United States)

    Saslow Gomez, Sarah A.; Faurie-Wisniewski, Danielle; Parsa, Arlen; Spitz, Jeff; Spitz, Jennifer Amdur; Loeb, Nancy C.; Geiger, Franz M.

    2015-01-01

    The classroom exercise outlined here is a self-directed assignment that connects students to the environmental contamination problem surrounding the DePue Superfund site. By connecting chemistry knowledge gained in the classroom with a real-world problem, students are encouraged to personally connect with the problem while simultaneously…

  8. 77 FR 2981 - Constitution Road Drum Superfund Site; Atlanta, Dekalb County, GA; Notice of Settlement

    Science.gov (United States)

    2012-01-20

    ... AGENCY Constitution Road Drum Superfund Site; Atlanta, Dekalb County, GA; Notice of Settlement AGENCY... Protection Agency has entered into a settlement for past response costs concerning the Constitution Road Drum... settlement are available from Ms. Paula V. Painter. Submit your comments by Site name Constitution Road...

  9. Geophysical log analysis of selected test and residential wells at the Shenandoah Road National Superfund Site, East Fishkill, Dutchess County, New York

    Science.gov (United States)

    Reynolds, Richard J.; Anderson, J. Alton; Williams, John H.

    2015-01-01

    The U.S. Geological Survey collected and analyzed geophysical logs from 20 test wells and 23 residential wells at the Shenandoah Road National Superfund Site in East Fishkill, New York, from 2006 through 2010 as part of an Interagency Agreement to provide hydrogeologic technical support to the U.S. Environmental Protection Agency, Region 2. The geophysical logs collected include caliper, gamma, acoustic and optical televiewer, deviation, electromagnetic-induction, magnetic-susceptibility, fluid-property, and flow under ambient and pumped conditions. The geophysical logs were analyzed along with single-well aquifer test data and drilling logs to characterize the lithology, fabric, fractures, and flow zones penetrated by the wells. The results of the geophysical log analysis were used as part of the hydrogeologic characterization of the site and in the design of discrete-zone monitoring installations in the test wells and selected residential wells.

  10. Report: Independent Ground Water Sampling Generally Confirms EPA’s Data at Wheeler Pit Superfund Site in Wisconsin

    Science.gov (United States)

    Report #10-P-0218, September 8, 2010. With minimal exceptions, our independent sampling results at the Wheeler Pit Superfund Site were consistent with the sampling results that EPA Region 5 has obtained historically.

  11. EPA Contract Laboratory Program Statement of Work for Inorganic Superfund Methods Multi-Media, Multi-Concentration ISM02.2

    Science.gov (United States)

    This document contains analytical methods for the analysis of metals and cyanide in environmental samples. It also contains contractual requirements for laboratories participating in Superfund's Contract Laboratory Program.

  12. EPA Contract Laboratory Program Statement of Work for Inorganic Superfund Methods Multi-Media, Multi-Concentration ISM02.3

    Science.gov (United States)

    This document contains analytical methods for the analysis of metals and cyanide in environmental samples. It also contains contractual requirements for laboratories participating in Superfund's Contract Laboratory Program.

  13. The electro-thermal dynamic stripping process for the remediation of a creosote-contaminated superfund site

    Energy Technology Data Exchange (ETDEWEB)

    Northington, C.D. [WRS Infrastructure and Environment, Tampa, FL (United States); McGee, B.C.W. [McMillan-McGee Corp., Calgary, AB (Canada)

    2005-07-01

    Pump-and-treat is a conventional soil and groundwater contaminant removal method that depends on factors such as the chemical nature of the contaminant, subsurface heterogeneity, sorption of contaminants to subsurface materials, difficulties in characterizing the subsurface, and system design. The cleanup of dense non-aqueous phase liquids (DNAPLs) is further complicated by the uncertain contaminant fate due to the tendency of DNAPLs to migrate downward, where they become difficult to locate and where they become immobile residual globules and a long-term source of ground water contamination. This paper presents the results of a pilot scale study in which an in-situ thermal decontamination technology was tested. The technology known as the Electro-Thermal Dynamic Stripping Process{sup TM} (ET-DS), was developed for a creosote-contaminated Superfund site to show the effectiveness of full-scale implementation of this method over the currently used pump-and- treat system to address contamination in the source zone. The pilot study follows similar methods used by reservoir engineers in the evaluation of thermal recovery methods for the recovery of bitumen and heavy oil. ET-DS was field test in the oil sands in order to use some operating data from the pilot to design oil sand specific ET-DS.

  14. Electrochemical peroxidation of PCBs and VOCs in superfund site water and sediments

    Energy Technology Data Exchange (ETDEWEB)

    Scrudato, R.J.; Chiarenzelli, J.R. [SUNY, Oswego, NY (United States)

    1996-12-31

    An electrochemical peroxidation (ECP) process has been developed and used to degrade polychlorinated biphenyls (PCB) and volatile organic compounds (VOC)-contaminated water, sludge, and sediments at a New York State Federal and State Superfund Site. The process involves passing an oscillating low-amperage (<10 amps) current through steel electrodes immersed in an acidified water or sediment slurry into which hydrogen peroxide (<1,000 ppm) is added. The generated free radicals attack organic compounds, including organo-metallic complexes and refractory compounds including PCBs. PCB degradation ranged from about 30% to 80% in experiments involving Federal Superfund Site sediments; total PCBs were reduced by {approximately}97% to 68%, respectively, in water and slurry collected from a State Superfund subsurface storage tank. VOC bench-scale experiments involved chloroethane, 1,1-dichloroethane, dichloromethane, 1,1,1-trichloroethane, and acetone and after a 3-min ECP treatment, degradation ranged from >94% to about 99.9%. Results indicate the ECP is a viable process to degrade organic contaminants in water and sediment suspensions. Because the treated water suspensions are acidified, select trace metal sorbed to the particulates is solubilized and therefore can be segregated from the particulates, offering a process that simultaneously degrades organic contaminants and separates trace metals. 19 refs., 1 fig., 4 tabs.

  15. Guidance for performing site inspections under CERCLA

    Energy Technology Data Exchange (ETDEWEB)

    1992-09-01

    This guidance presents EPA`s site inspection (SI) strategy. The strategy discusses procedural guidelines to investigate potential Superfund (CERCLA) sites for evaluation pursuant to the Hazard Ranking System (HRS), revised in accordance with the Superfund Amendments and Reauthorization Act of 1986. The HRS is the primary means by which EPA evaluates sites for superfund`s National Priorities List (NPL).

  16. Selected Water- and Sediment-Quality, Aquatic Biology, and Mine-Waste Data from the Ely Copper Mine Superfund Site, Vershire, VT, 1998-2007

    Science.gov (United States)

    Argue, Denise M.; Kiah, Richard G.; Piatak, Nadine M.; Seal, Robert R., II; Hammarstrom, Jane M.; Hathaway, Edward; Coles, James F.

    2008-01-01

    The data contained in this report are a compilation of selected water- and sediment-quality, aquatic biology, and mine-waste data collected at the Ely Copper Mine Superfund site in Vershire, VT, from August 1998 through May 2007. The Ely Copper Mine Superfund site is in eastern, central Vermont (fig. 1) within the Vermont Copper Belt (Hammarstrom and others, 2001). The Ely Copper Mine site was placed on the U.S. Environmental Protection Agency (USEPA) National Priorities List in 2001. Previous investigations conducted at the site documented that the mine is contributing metals and highly acidic waters to local streams (Hammarstrom and others, 2001; Holmes and others, 2002; Piatak and others, 2003, 2004, and 2006). The U.S. Geological Survey (USGS), in cooperation with the USEPA, compiled selected data from previous investigations into uniform datasets that will be used to help characterize the extent of contamination at the mine. The data may be used to determine the magnitude of biological impacts from the contamination and in the development of remediation activities. This report contains analytical data for samples collected from 98 stream locations, 6 pond locations, 21 surface-water seeps, and 29 mine-waste locations. The 98 stream locations are within 3 streams and their tributaries. Ely Brook flows directly through the Ely Copper Mine then into Schoolhouse Brook (fig. 2), which joins the Ompompanoosuc River (fig. 1). The six pond locations are along Ely Brook Tributary 2 (fig. 2). The surface-water seeps and mine-waste locations are near the headwaters of Ely Brook (fig. 2 and fig. 3). The datasets 'Site_Directory' and 'Coordinates' contain specific information about each of the sample locations including stream name, number of meters from the mouth of stream, geographic coordinates, types of samples collected (matrix of sample), and the figure on which the sample location is depicted. Data have been collected at the Ely Copper Mine Superfund site by the

  17. Health assessment for TRW Proposed National Priorities List (NPL) Site, Minerva, Stark County, Ohio, Region 5. CERCLIS No. OHD004179339. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-31

    The TRW site is a Proposed National Priorities List (NPL) site located about one mile northeast of downtown Minerva, Stark County, Ohio. Previous disposal practices by the former TRW plant (currently owned by PCC Airfoils, Inc.) introduced polychlorinated biphenyls (PCBs) and volatile organic compounds (VOCs) into on-site and off-site soils and ground water. Off-site residential wells were contaminated with elevated levels of VOCs, especially vinyl chloride. In 1985, contaminated soils and sediments from the former disposal areas were excavated and disposed of in an on-site secure landfill (cell). In addition, in 1986 a Consent Order between TRW and the Ohio Environmental Protection Agency was signed, in which TRW agreed to implement an on-site and off-site ground water 'pump and treat' operation to intercept the VOC contaminant plumes. The site is of potential public health concern because of the risk to human health that could result from possible exposure to hazardous substances at levels that may result in adverse health effects over time.

  18. Aquatic assessment of the Ely Copper Mine Superfund site, Vershire, Vermont

    Science.gov (United States)

    Seal, Robert R.; Kiah, Richard G.; Piatak, Nadine M.; Besser, John M.; Coles, James F.; Hammarstrom, Jane M.; Argue, Denise M.; Levitan, Denise M.; Deacon, Jeffrey R.; Ingersoll, Christopher G.

    2010-01-01

    The Ely Mine, which operated from 1821 to 1905, and its area of downstream impact constitute the Ely Copper Mine Superfund site. The site was placed on the National Priorities List in 2001. The mine comprises underground workings, foundations from historical structures, several waste-rock piles, roast beds associated with the smelting operation, and slag piles resulting from the smelting. The mine site is drained by Ely Brook, which includes several tributaries, one of which drains a series of six ponds. Ely Brook empties into Schoolhouse Brook, which flows 3.3 kilometers and joins the Ompompanoosuc River.

  19. Geophysical logging at the Cristex Drum National Priorities List Superfund Site near Oxford, North Carolina

    Science.gov (United States)

    Antolino, Dominick J.

    2017-01-01

    The collection of borehole geophysical logs data was conducted by the U.S. Geological Survey South Atlantic Water Science Center in the vicinity of the Cristex Drum National Priorities List Superfund Site near Oxford, North Carolina, during January through March 2016. In an effort to assist the U.S. Environmental Protection Agency in the development of a conceptual groundwater model for the assessment of current contaminant distribution and future migration of contaminants, borehole geophysical log and image data collection, which included the delineation of more than 150 subsurface features (primarily fracture orientations) in 3 open borehole wells.

  20. CHARACTERIZATION AND FATE OF PAH-CONTAMINATED SEDIMENTS AT THE WYCKOFF/EAGLE HARBOR SUPERFUND SITE

    Science.gov (United States)

    Eagle Harbor is a shallow marine embayment of Bainbridge Island, WA and formerly the site of the Wyckoff wood-treatment facility. The facility became operational in the early 1900s and used large quantities of creosote in its wood-treating processes. Creosote percolated through t...

  1. Environmental Asbestos Assessment Manual Superfund Method for the Determination of Asbestos in Ambient Air Part 2: Technical Background Document

    Science.gov (United States)

    A sampling and analysis method for the determination of asbestos in air is presented in Part 1 of this report, under separate cover. This method is designed specifically to provide results suitable for supporting risk assessments at Superfund sites, although it is applicable t...

  2. ASSESSMENT OF VAPOR INTRUSION IN HOMES NEAR THE RAYMARK SUPERFUND SITE USING BASEMENT AND SUB-SLAB AIR SAMPLES

    Science.gov (United States)

    This report describes the results of an investigation conducted to assist EPA’s New England Regional Office in evaluating vapor intrusion at 15 homes and one commercial building near the Raymark Superfund Site in Stratford, Connecticut. Methods were developed to sample sub-slab ...

  3. Evaluation of native microbial soil populations at a trichloroethylene contaminated Superfund site in the presence of a permeable reactive barrier (biowall) using a metagenomics approach

    Science.gov (United States)

    The Beaverdam Road Landfill occupies 3.5 acres and was an active disposal site for miscellaneous non-hazardous waste from 1943 to 1990, before being capped. In 1994, this site was included on the Nation Priorities List (NPL) for periodic inspection and remediation in accordance with the program regu...

  4. Congressional Testimony: Statement of Wade T. Najjum Before the Subcommittee on Superfund and Environmental Health Committee on Environment and Public Works United States Senate

    Science.gov (United States)

    Statement of Wade T. Najjum Assistant Inspector General for Program Evaluation U.S. EPA Office of Inspector General Before the Subcommittee on Superfund and Environmental Health Committee on Environment and Public Works United States Senate

  5. Environmental contaminants in fish and mussels from Meddybemps Lake, the Dennys River, and East Machias River - Eastern Surplus Superfund Site, Meddybemps, Maine

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — From 1946 to the early 1980s, the 3-acre Eastern Surplus Superfund Site in Meddybemps, Maine, was used for the disposal and storage of surplus military equipment and...

  6. Integrating Monitoring and Genetic Methods To Infer Historical Risks of PCBs and DDE to Common and Roseate Terns Nesting Near the New Bedford Harbor Superfund Site (Massachusetts, USA)

    Science.gov (United States)

    Common and roseate terns are migratory piscivorous seabirds with major breeding colonies within feeding range of thepolychlorinated biphenyl (PCB)-contaminated New Bedford Harbor (NBH, MA, USA) Superfund site. Our longitudinal study shows that before PCB discharges into NBH cease...

  7. Environmental Factor{trademark} system: Superfund site information from five EPA databases

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Environmental Factor puts today`s technology to work to provide a better, more cost-efficient and time-saving way to access EPA information on hazardous waste sites. Environmental consultants, insurers, and reinsurers, corporate risk assessors and companies actively involved in the generation, transport, storage or cleanup of hazardous waste materials can use its user-friendly information retrieval system to gain rapid access to vital information in immediately-usable form. Search, retrieve, and export information in real time. No more waiting for the mail or overnight delivery services to deliver hard copies of voluminous listings and individual site reports. More than 200,000 pages of EPA hazardous waste site information are contained in 5 related databases: (1) Site data from the National Priority List (NPL) and CERCLIS databases, Potentially Responsible Parties (PRP) and Records of Decision (RODs) summaries; (2) Complete PRP information; (3) EPA Records of Decision (Full Text); (4) entire Civil Enforcement Docket; and (5) Glossary of EPA terms, abbreviations and acronyms. Environmental Factor`s powerful database management engine gives even the most inexperienced computer user extensive search capabilities, including wildcard, phonetic and direct cross reference searches across multiple databases.

  8. Continued geophysical logging near the GMH Electronics National Priorities List Superfund site near Roxboro, North Carolina

    Science.gov (United States)

    Antolino, Dominick J.; Chapman, Melinda J.

    2017-01-06

    The U.S. Geological Survey South Atlantic Water Science Center collected borehole geophysical logs and images and continuous water-level data near the GMH Electronics National Priorities List Superfund site near Roxboro, North Carolina, during December 2012 through July 2015. Previous work by the U.S. Geological Survey South Atlantic Water Science Center at the site involved the collection of borehole geophysical log data in 15 wells, in addition to surface geologic mapping and passive diffusion bag sampling. In a continued effort to assist the U.S. Environmental Protection Agency in developing a conceptual groundwater model to assess current contaminant distribution and future migration of contaminants, more than 900 subsurface features (primarily fracture orientations) in 10 open borehole wells were delineated and continuous water-level data information from 14 monitoring wells within close proximity of the initially drilled boreholes was collected to observe any induced water-level fluctuations during drilling operations

  9. Superfund reform: US Environmental Protection Agency`s 30-day study and its implication for the US Department of Energy

    Energy Technology Data Exchange (ETDEWEB)

    Siegel, M.R.; Friedman, J.R.; Neff, R.W.

    1993-03-01

    As part of an ongoing effort to reform and restructure the US Environmental Protection Agency`s (EPAS) Superfund program, the EPA Administrator on October 21, 1991, announced several key programmatic reforms. These reforms are a result of the Superfund 30-Day Task Force Report (30-Day Study, EPA 1991a), an effort carried out by EPAs office of Solid Waste and Emergency Response (OSWER). The EPA OSWER oversees environmental cleanup activities under a number of statutory authorities, including the Comprehensive Environmental response, Compensation, and Liability Act (CERCLA, also known as Superfund). CERCLA and its implementing regulation, the National Contingency Plan (NCP), establish a regulatory framework to govern the cleanup of existing, and often abandoned, hazardous waste sites. The purposes of this report are to (1) review the background and recommendations of EPNs 30-Day Study, (2) identify and discuss the initiatives from the 30-Day Study that may impact DOE`s environmental restoration mission, (3) report on EPAs progress in implementing the selected priority initiatives, and (4) describe potentially related DOE activities.

  10. Superfund and Toxic Release Inventory Sites, StateCERCLIS-This data set contains potential EPA Superfund sites. These locations represent sites, not contaminated areas., Published in 2008, 1:100000 (1in=8333ft) scale, State of Utah Automated Geographic Reference Center.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Superfund and Toxic Release Inventory Sites dataset, published at 1:100000 (1in=8333ft) scale, was produced all or in part from Field Survey/GPS information as...

  11. Superfund and Toxic Release Inventory Sites, Point or polygon geo-location of federally designated superfund sites in Wisconsin. Usually geolocated via on screen digitizing against DOPs (could be geo-located via GPS). Source year of DOPs vary, Published in unknown, 1:4800 (1in=400ft) scale, Wisconsin DNR - Bureau of Remediation and Redevelopment.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This Superfund and Toxic Release Inventory Sites dataset, published at 1:4800 (1in=400ft) scale, was produced all or in part from Orthoimagery information as of...

  12. Phytoextraction of Pb and Cd from a superfund soil: effects of amendments and croppings.

    Science.gov (United States)

    Bricker, T J; Pichtel, J; Brown, H J; Simmons, M

    2001-01-01

    In a growth chamber, maize (Zea mays) and Indian mustard (Brassica juncea) were grown over two croppings in soil from a Superfund site (PbTotal = 65,200 mg/kg and CdTotal = 52mg/kg). Soil treatments consisted of ethylenediaminetetraacetic acid, sodium citrate and composted sewage sludge, each at two rates (EDTA .05%, EDTA .2%, citrate .05%, citrate .2%, CSS 5% and CSS 10%, respectively). In most cases, the EDTA and citrate treatments were superior in terms of solubilizing soil Pb for root uptake and translocation into above-ground biomass. In the first maize crop, the EDTA .2% treatment resulted in 2,435 and 9,389mg/kg Pb in shoot and root tissues, respectively. The CSS treatments typically resulted in lowest Pb and Cd removal efficiencies. Lead remaining in the soil after two croppings was mainly associated with the carbonate, organic, and residual fractions, which represent the less bioavailable forms. Soil Cd was generally more mobile for plant uptake than soil Pb. The EDTA .2% and citrate treatments were most successful in promoting Cd uptake by both maize and mustard. Although Pb concentrations (mg/kg tissue) were lower for maize than mustard, the former removed more total Pb (0.2 mg per pot, mean over all treatments), compared to mustard (0.03 mg), by virtue of its higher biomass production.

  13. Fishing a superfund site: Dissonance and risk perception of environmental hazards by fishermen in Puerto Rico

    Energy Technology Data Exchange (ETDEWEB)

    Burger, J.; Gochfeld, M. (Rutgers University, Piscataway, NJ (USA))

    1991-06-01

    Risk perception studies show that individuals tend to underestimate significant risks, overestimate negligible ones, and distrust authorities. They also rely on a variety of strategies or heuristics to reach decisions regarding their risk-taking behavior. The authors report on a survey of fishermen and crabbers engaged in recreational and substance fishing in a Puerto Rican estuary (near Humacao), which has been declared a Superfund site because of suspected contamination by mercury, and at ecologically similar control sites. Nearly everyone interviewed at the Humacao site was aware of the mercury contamination, but either denied its importance, believed the contamination was restricted to a distant part of the estuary, or assumed that the estuary would be closed by the authorities if the threat was real. All site-users consumed the fish and crabs they caught. At Humacao, the average catch was 7 fish per fishermen (mostly tilapia, Tilapia mossambica, and tarpon, Megalops atlantica) and 13 crabs per crabber (all blue crabs, Callinectes sapidus). On average, the site-users returned to the lagoons about 3-4 times per month. At control sites, fewer fish were eaten. The worst case consumption of tarpon, a species which concentrated mercury at Eastern Puerto Rico, provided an exposure exceeding the EPA reference dose, whereas consumption of one tarpon per week did not entail excess exposure. Fortunately, few individuals caught tarpon exclusively. Unlike counterparts in the northeastern United States, they trusted authorities and indicated that they would have heeded warnings of mercury contamination posted where they fished.

  14. Radiochemical Analyses of the Filter Cake, Granular Activated Carbon, and Treated Ground Water from the DTSC Stringfellow Superfund Site Pretreatment Plant

    Energy Technology Data Exchange (ETDEWEB)

    Esser, B K; McConachie, W; Fischer, R; Sutton, M; Szechenyi, S

    2005-09-16

    The Department of Toxic Substance Control (DTSC) requested that Lawrence Livermore National Laboratory (LLNL) evaluate the treatment process currently employed at the Department's Stringfellow Superfund Site Pretreatment Plant (PTP) site to determine if wastes originating from the site were properly managed with regards to their radioactivity. In order to evaluate the current management strategy, LLNL suggested that DTSC characterize the effluents from the waste treatment system for radionuclide content. A sampling plan was developed; samples were collected and analyzed for radioactive constituents. Following is brief summary of those results and what implications for waste characterization may be made. (1) The sampling and analysis provides strong evidence that the radionuclides present are Naturally Occurring Radioactive Material (NORM). (2) The greatest source of radioactivity in the samples was naturally occurring uranium. The sample results indicate that the uranium concentration in the filter cake is higher than the Granular Activated Carbon (GAC) samples. (11 -14 and 2-6 ppm respectively). (3) No radiologic background for geologic materials has been established for the Stringfellow site, and comprehensive testing of the process stream has not been conducted. Without site-specific testing of geologic materials and waste process streams, it is not possible to conclude if filter cake and spent GAC samples contain radioactivity concentrated above natural background levels, or if radionuclides are being concentrated by the waste treatment process. Recommendation: The regulation of Technologically Enhanced, Naturally Occurring Radioactive Materials (T-NORM) is complex. Since the results of this study do not conclusively demonstrate that natural radioactive materials have not been concentrated by the treatment process it is recommended that the DTSC consult with the Department of Health Services (DHS) Radiological Health Branch to determine if any further

  15. Environmental Factor(tm) system: Superfund site information from five EPA databases (on cd-rom). Database

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    Environmental Factor puts today`s technology to work to provide a better, more cost-efficient and time-saving way to access EPA information on hazardous waste sites. Environmental consultants, insurers, and reinsurers, corporate risk assessors and companies actively involved in the generation, transport, storage or cleanup of hazardous waste materials can use its user-friendly information retrieval system to gain rapid access to vital information in immediately-usable form. Search, retrieve, and export information in real time. No more waiting for the mail or overnight delivery services to deliver hard copies of voluminous listings and individual site reports. More than 200,000 pages of EPA hazardous waste site information are contained in 5 related databases: (1) Site data from the National Priority List (NPL) and CERCLIS databases, Potentially Responsible Parties (PRP) and Records of Decision (RODs) summaries; (2) Complete PRP information; (3) EPA Records of Decision (Full Text); (4) entire Civil Enforcement Docket; and (5) Glossary of EPA terms, abbreviations and acronyms. Environmental Factor`s powerful database management engine gives even the most inexperienced computer user extensive search capabilities, including wildcard, phonetic and direct cross reference searches across multiple databases. The first menu option delivers information from the NPL, CERCLIS site data, PRP and RODs summary information. Enter a set of search criteria and then immediately access displays containing information from all of these databases. Get full PRP information and Full Text RODs by using their respective menu options. If your search turns up multiple items, a list of site names appears. To bring up the data, highlight the specific site you want and hit Enter. That`s how easy it is to access the vast amount of data stored in the Environmental Factor CD-ROM.

  16. Geochemical Characteristics of TP3 Mine Wastes at the Elizabeth Copper Mine Superfund Site, Orange County, Vermont

    Science.gov (United States)

    Hammarstrom, Jane M.; Piatak, Nadine M.; Seal, Robert R., II; Briggs, Paul H.; Meier, Allen L.; Muzik, Timothy L.

    2003-01-01

    Remediation of the Elizabeth mine Superfund site in the Vermont copper belt poses challenges for balancing environmental restoration goals with issues of historic preservation while adopting cost-effective strategies for site cleanup and long-term maintenance. The waste-rock pile known as TP3, at the headwaters of Copperas Brook, is especially noteworthy in this regard because it is the worst source of surface- and ground-water contamination identified to date, while also being the area of greatest historical significance. The U.S. Geological Survey (USGS) conducted a study of the historic mine-waste piles known as TP3 at the Elizabeth mine Superfund site near South Strafford, Orange County, VT. TP3 is a 12.3-acre (49,780 m2) subarea of the Elizabeth mine site. It is a focus area for historic preservation because it encompasses an early 19th century copperas works as well as waste from late 19th- and 20th century copper mining (Kierstead, 2001). Surface runoff and seeps from TP3 form the headwaters of Copperas Brook. The stream flows down a valley onto flotation tailings from 20th century copper mining operations and enters the West Branch of the Ompompanoosuc River approximately 1 kilometer downstream from the mine site. Shallow drinking water wells down gradient from TP3 exceed drinking water standards for copper and cadmium (Hathaway and others, 2001). The Elizabeth mine was listed as a Superfund site in 2001, mainly because of impacts of acid-mine drainage on the Ompompanoosuc River.

  17. Superfund record of decision (EPA Region 4): Helena Chemical Company, (Tampa Plant), Hillsborough County, Tampa, FL, May 7, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-06-01

    The decision document (Record of Decision), presents the selected remedial action for the Helena Chemical Company Superfund Site, Tampa, Hillsborough County, Florida. This action addresses soil, sediment, and ground water contamination at the site and calls for the implementation of response measures which will protect human health and the environment. The selected remedy includes biological treatment (i.e., bioremediation) of pesticides and other site related contaminants located in surface soil sand sediments to levels appropriate for future industrial use of the Site. In addition, the selected remedy includes ground water recovery and treatment to remove pesticides and other site related contaminants.

  18. Surface-Water Hydrology and Quality at the Pike Hill Superfund Site, Corinth, Vermont, October 2004 to December 2005

    Science.gov (United States)

    Kiah, Richard G.; Deacon, Jeffrey R.; Piatak, Nadine M.; Seal, Robert R.; Coles, James F.; Hammarstrom, Jane M.

    2007-01-01

    The hydrology and quality of surface water in and around the Pike Hill Brook watershed, in Corinth, Vermont, was studied from October 2004 to December 2005 by the U.S. Geological Survey in cooperation with the U.S. Environmental Protection Agency (USEPA). Pike Hill was mined intermittently for copper from 1847 to 1919 and the site is known to be contributing trace elements and acidity to Pike Hill Brook and an unnamed tributary to Cookville Brook. The site has been listed as a Superfund site since 2004. Streamflow, specific conductance, pH, and water temperature were measured continuously and monthly at three sites on Pike Hill Brook to determine the variation in these parameters over an annual cycle. Synoptic water-quality sampling was done at 10 stream sites in October 2004, April 2005, and June 2005 and at 13 stream sites in August 2005 to characterize the quality of surface water in the watershed on a seasonal and spatial basis, as well as to assess the effects of wetlands on water quality. Samples for analysis of benthic macroinvertebrate populations were collected at 11 stream sites in August 2005. Water samples were analyzed for 5 major ions and 32 trace elements. Concentrations of trace elements at sites in the Pike Hill Brook watershed exceeded USEPA National Recommended Water Quality Criteria acute and chronic toxicity standards for aluminum, iron, cadmium, copper, and zinc. Concentrations of copper exceeded the chronic criteria in an unnamed tributary to Cookville Brook in one sample. Concentrations of sulfate, calcium, aluminum, iron, cadmium, copper, and zinc decreased with distance from a site directly downstream from the mine (site 1), as a result of dilution and through sorption and precipitation of the trace elements. Maximum concentrations of aluminum, iron, cadmium, copper, and zinc were observed during spring snowmelt. Concentrations of sulfate, calcium, cadmium, copper, and zinc, and instantaneous loads of calcium and aluminum were

  19. Surface-Water Hydrology and Quality at the Pike Hill Superfund Site, Corinth, Vermont, October 2004 to December 2005

    Science.gov (United States)

    Kiah, Richard G.; Deacon, Jeffrey R.; Piatak, Nadine M.; Seal, Robert R., II; Coles, James F.; Hammarstrom, Jane M.

    2007-01-01

    The hydrology and quality of surface water in and around the Pike Hill Brook watershed, in Corinth, Vermont, was studied from October 2004 to December 2005 by the U.S. Geological Survey in cooperation with the U.S. Environmental Protection Agency (USEPA). Pike Hill was mined intermittently for copper from 1847 to 1919 and the site is known to be contributing trace elements and acidity to Pike Hill Brook and an unnamed tributary to Cookville Brook. The site has been listed as a Superfund site since 2004. Streamflow, specific conductance, pH, and water temperature were measured continuously and monthly at three sites on Pike Hill Brook to determine the variation in these parameters over an annual cycle. Synoptic water-quality sampling was done at 10 stream sites in October 2004, April 2005, and June 2005 and at 13 stream sites in August 2005 to characterize the quality of surface water in the watershed on a seasonal and spatial basis, as well as to assess the effects of wetlands on water quality. Samples for analysis of benthic macroinvertebrate populations were collected at 11 stream sites in August 2005. Water samples were analyzed for 5 major ions and 32 trace elements. Concentrations of trace elements at sites in the Pike Hill Brook watershed exceeded USEPA National Recommended Water Quality Criteria acute and chronic toxicity standards for aluminum, iron, cadmium, copper, and zinc. Concentrations of copper exceeded the chronic criteria in an unnamed tributary to Cookville Brook in one sample. Concentrations of sulfate, calcium, aluminum, iron, cadmium, copper, and zinc decreased with distance from a site directly downstream from the mine (site 1), as a result of dilution and through sorption and precipitation of the trace elements. Maximum concentrations of aluminum, iron, cadmium, copper, and zinc were observed during spring snowmelt. Concentrations of sulfate, calcium, cadmium, copper, and zinc, and instantaneous loads of calcium and aluminum were

  20. Evaluation of geophysical logs, phase I, for Crossley Farms Superfund Site, Berks County, Pennsylvania

    Science.gov (United States)

    Conger, Randall W.

    1998-01-01

    Twenty-one wells were drilled at Crossley Farms Superfund Site between December 15, 1987, and May 1, 1988, to define and monitor the horizontal and vertical distribution of ground-water contamination emanating from a suspected contaminant source area (Blackhead Hill). Eight well clusters were drilled on or near the Crossley Site and three well clusters were drilled at locations hydrologically down gradient from the site. Depths of wells range from 21 to 299 feet below land surface. These wells were installed in saprolite in shallow, intermediate, and deep water-producing zones of the fractured bedrock aquifer. Borehole-geophysical and video logging were conducted between April 24, 1997, and May 8, 1997, to determine the water-producing zones, water-receiving zones, zones of vertical flow, borehole depth, and casing integrity in each well. This data and interpretation will be used to determine the location of the well intake for the existing open-hole wells, which will be retrofitted to isolate and monitor water-producing zones and prevent further cross-contamination within each open borehole, and identify wells that may need rehabilitation or replacement. Caliper and video logs were used to locate fractures, inflections on fluid-temperature and fluidresistivity logs indicated possible fluid-bearing fractures, and flowmeter measurements verified these locations. Single-point-resistance and natural-gamma logs provided information on stratigraphy. After interpretation of geophysical logs, video logs, and driller?s notes, all wells will be constructed so that water-level fluctuations can be monitored and discrete water samples collected from shallow, intermediate, and deep water-bearing zones in each well. Geophysical logs were run on seven bedrock and two deep bedrock wells. Gamma logs were run on 10 bedrock wells. Twenty-two wells were inspected visually with the borehole video camera for casing integrity.

  1. Evaluation of Exposure to Radon Levels in Relation to Climatic Conditions at a Superfund Site.

    Science.gov (United States)

    Merrill, Elaine Alice

    1995-11-01

    Workers at a Superfund site have expressed concern that they may be exposed to elevated levels of radon gas, especially when meteorology is suitable. The site, formally a uranium processing site, stores the world's largest quantity of Ra-226 in two concrete silos. A layer of bentonite foam was placed over the contents of the silos in 1991 as a means to reduce the amount of radon emissions. Hourly real-time outdoor and indoor site radon data covering an entire year was statistically evaluated in relation to meteorological data covering the same time period. The hourly data was found to be lognormally distributed. Radon levels were highest during the early morning hours and during the summer months. Both outdoor and indoor concentrations were found to significantly vary with temporal and climatic factors, namely wind direction and relative humidity. Radon levels in the work areas were not found to be statistically different from off-site levels. Only radon levels in the vicinity of the storage silos, which is an exclusion zone, were significantly higher than levels off-site. Hence, the protective bentonite covering seems to be effective in reducing radon emissions. Two methods were used to calculate a hypothetical dose, based upon the annual average concentrations of radon in the work areas onsite, the BEIR IV method and the NCRP method, respectively. The BEIR IV method, which accounts for the activity ratio of radon and its daughter products, resulted in a slightly higher dose than the NCRP method. As expected, based on the mean concentrations, the hypothetical annual exposures from radon in the work areas of the site were below recommended exposure limits.

  2. Detection of environmentally persistent free radicals at a superfund wood treating site.

    Science.gov (United States)

    dela Cruz, Albert Leo N; Gehling, William; Lomnicki, Slawomir; Cook, Robert; Dellinger, Barry

    2011-08-01

    Environmentally persistent free radicals (EPFRs) have previously been observed in association with combustion-generated particles and airborne PM(2.5) (particulate matter, d 2.5um). The purpose of this study was to determine if similar radicals were present in soils and sediments at Superfund sites. The site was a former wood treating facility containing pentachlorophenol (PCP) as a major contaminant. Both contaminated and noncontaminated (just outside the contaminated area) soil samples were collected. The samples were subjected to the conventional humic substances (HS) extraction procedure. Electron paramagnetic resonance (EPR) spectroscopy was used to measure the EPFR concentrations and determine their structure for each sample fraction. Analyses revealed a ∼30× higher EPFR concentration in the PCP contaminated soils (20.2 × 10(17) spins/g) than in the noncontaminated soil (0.7 × 10(17) spins/g). Almost 90% of the EPFR signal originated from the minerals/clays/humins fraction. GC-MS analyses revealed ∼6500 ppm of PCP in the contaminated soil samples and none detected in the background samples. Inductively coupled plasma-atomic emission spectrophotometry (ICP-AES) analyses revealed ∼7× higher concentrations of redox-active transition metals, in the contaminated soils than the noncontaminated soil. Vapor phase and liquid phase dosing of the clays/minerals/humins fraction of the soil with PCP resulted in an EPR signal identical to that observed in the contaminated soil, strongly suggesting the observed EPFR is pentachlorophenoxyl radical. Chemisorption and electron transfer from PCP to transition metals and other electron sinks in the soil are proposed to be responsible for EPFR formation.

  3. Calculating the Diffusive Flux of Persistent Organic Pollutants between Sediments and the Water Column on the Palos Verdes Shelf Superfund Site using Polymeric Passive Samplers

    Science.gov (United States)

    Passive samplers were used to determine water concentrations of persistent organic pollutants (POPs) in the surface sediments and near-bottom water of a marine Superfund site on the Palos Verdes Shelf, California, USA. Measured concentrations in the porewater and water column at...

  4. Passive Sampling to Measure Baseline Dissolved Persistent Organic Pollutant Concentrations in the Water Column of the Palos Verdes Shelf Superfund Site

    Science.gov (United States)

    Passive sampling was used to deduce water concentrations of persistent organic pollutants (POPs) in the vicinity of a marine Superfund site on the Palos Verdes Shelf, California, USA. Pre-calibrated solid phase microextraction (SPME) fibers and polyethylene (PE) strips that were...

  5. DOJ News Release: New York Man Ordered to Pay Over $400,000 in Restitution and Fines for Role in Kickback Scheme at New Jersey Superfund Sites

    Science.gov (United States)

    WASHINGTON, D.C. – An Amherst, New York, man was ordered to pay over $400,000 in restitution and fines and placed on five years’ probation for his role in a kickback scheme at the Federal Creosote and Diamond Alkali Superfund sites in New Jersey.

  6. Occurences and Fate of DDT Principal Isomers/Metabolites, DDA, and o,p'-DDD Enantiomers in Fish, Sediment and Water at a DDT-Impacted Superfund Site

    Science.gov (United States)

    In the 1950s and 60s, discharges from a DDT manufacturing plant contaminated a tributary system of the Tennessee River near Huntsville, Alabama, USA. Regulatory action resulted in declaring the area a Superfund site which required remediation and extensive monitoring. Monitoring ...

  7. Ethanol-Fed Or Solid-Phase Organic Sulfate Reducing Bioreactors For The National Tunnel Drainage, Clear Creek/Central City Superfund Site (Presentation)

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) is planning to treat mining influenced water (MIW) from the National Tunnel Adit that discharges to North Clear Creek near the City of Blackhawk, Colorado. North Clear Creek is part of the Clear Creek/Central City Superfund Site, an...

  8. Ethanol-Fed Or Solid-Phase Organic Sulfate Reducing Bioreactors For The National Tunnel Drainage, Clear Creek/Central City Superfund Site

    Science.gov (United States)

    The U.S. Environmental Protection Agency (EPA) is planning to treat mining influenced water (MIW) from the National Tunnel Adit that discharges to North Clear Creek near the City of Blackhawk, Colorado. North Clear Creek is part of the Clear Creek/Central City Superfund Site, an...

  9. COMPARISON OF GEOPROBE PRT AND AMS GVP SOIL-GAS SAMPLING SYSTEMS WITH DEDICATED VAPOR PROBES IN SANDY SOILS AT THE RAYMARK SUPERFUND SITE

    Science.gov (United States)

    A study was conducted near the Raymark Superfund Site in Stratford, Connecticut to compare results of soil-gas sampling using dedicated vapor probes, a truck-mounted direct-push technique - the Geoprobe Post-Run-Tubing (PRT) system, and a hand-held rotary hammer technique - the A...

  10. EPA Proposes to Add Dutchess County Creek, N.Y. to the Federal Superfund List, Sediment Contaminated with Mercury, Polycyclic Aromatic Hydrocarbons

    Science.gov (United States)

    (New York, N.Y.) The U.S. Environmental Protection Agency today proposed adding the Wappinger Creek in Dutchess County, N.Y. to its Superfund National Priorities List of the country's most hazardous waste sites. Sediment within the two mile long tidal port

  11. EPA Finalizes Plan to Address Contaminated Groundwater at Curtis Specialty Papers Superfund Site in Milford Borough and Alexandria Township, N.J.

    Science.gov (United States)

    (New York, N.Y.) The U.S. Environmental Protection Agency has finalized a plan to clean up contaminated groundwater at the Curtis Specialty Papers Superfund site in Milford Borough and Alexandria Township, New Jersey. The site includes the former Milford P

  12. Remedial investigation work plan for the Upper East Fork Poplar Creek Characterization Area, Oak Ridge Y-12 Plant, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    More than 200 contaminated sites created by past waste management practices have been identified at the Y-12 Plant. Many of the sites have been grouped into operable units based on priority and on investigative and remediation requirements. The Y-12 Plant is one of three major facilities on the ORR. The ORR contains both hazardous and mixed-waste sites that are subject to regulations promulgated under the Resource Conservation and Recovery Act of 1976 (RCRA) and the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA), as amended by the Superfund Amendments and Reauthorization Act of 1986. Under RCRA guidelines and requirements from the Tennessee Department of Environment and Conservation (TDEC), the Y-12 Plant initiated investigation and monitoring of various sites within its boundaries in the mid-1980s. The entire ORR was placed on the National Priorities List (NPL) of CERCLA sites in November 1989. Following CERCLA guidelines, sites under investigation require a remedial investigation (RI) to define the nature and extent of contamination, evaluate the risks to public health and the environment, and determine the goals for a feasibility study (FS) of potential remedial actions.

  13. 76 FR 71500 - National Oil and Hazardous Substances Pollution Contingency Plan National Priorities List...

    Science.gov (United States)

    2011-11-18

    ... AGENCY 40 CFR Part 300 National Oil and Hazardous Substances Pollution Contingency Plan National... Superfund) of 1980, as amended, is an appendix of the National Oil and Hazardous Substances Pollution... National Priorities List (NPL) on September 30, 2011, (76 FR 60777). The NPL, promulgated pursuant...

  14. KEY COMPARISON: Activity measurements of the radionuclide 201Tl for the LNE-LNHB, France, PTB, Germany and the NPL, UK in the ongoing comparison BIPM.RI(II)-K1.Tl-201

    Science.gov (United States)

    Ratel, G.; Michotte, C.; Moune, M.; Bobin, C.; Kossert, K.; Johansson, L.

    2008-01-01

    In 2005, the Laboratoire national de métrologie et essais-Laboratoire national Henri Becquerel (LNE-LNHB) and the Physikalisch-Technische Bundesanstalt (PTB) each submitted a sample of known activity of 201Tl to the International Reference System (SIR). In 2006, the National Physical Laboratory (NPL) submitted their first sample. The range of values of the activity submitted was between 2 MBq and 63 MBq. These key comparison results have been included in the re-evaluated key comparison reference value and replaced the previous results for France and Germany in the matrix of degrees of equivalence in the key comparison database that now contains seven results, identifier BIPM.RI(II)-K1.Tl-201. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCRI Section II, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

  15. KEY COMPARISON Update of the BIPM.RI(II)-K1.Tc-99m comparison of activity measurements for the radionuclide 99mTc to include new results for the LNE-LNHB and the NPL

    Science.gov (United States)

    Michotte, C.; Courte, S.; Ratel, G.; Moune, M.; Johansson, L.; Keightley, J.

    2010-01-01

    In 2007 and 2008 respectively, the Laboratoire national de métrologie et d'essais-Laboratoire national Henri Becquerel (LNE-LNHB), France and the National Physical Laboratory (NPL), UK, submitted ampoules with between 10 MBq and 130 MBq activity of 99mTc to the International Reference System (SIR), to update their results in the BIPM.RI(II)-K1.Tc-99m comparison. Together with the four other national metrology institutes (NMI) that are participants, thirteen samples have been submitted since 1983. The key comparison reference value (KCRV) has been recalculated to include the latest primary results of the PTB and the LNE-LNHB as this makes the evaluation more robust. The degrees of equivalence between each equivalent activity measured in the SIR are given in the form of a matrix for all six NMIs. A graphical presentation is also given. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCRI Section II, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

  16. KEY COMPARISON: Activity measurements of the radionuclide 54Mn for the LNE-LNHB, France, NPL, United Kingdom and the MKEH, Hungary, in the ongoing comparison BIPM.RI(II)-K1.Mn-54

    Science.gov (United States)

    Ratel, G.; Michotte, C.; Kryeziu, D.; Moune, M.; Keightley, J.; Johansson, L.; Szucs, L.; Csete, I.

    2008-01-01

    In 2006, the Laboratoire national de métrologie et d'essais-Laboratoire national Henri Becquerel (LNE-LNHB), France, the National Physical Laboratory (NPL), UK and the Magyar Kereskedelmi Engedélyezési Hivatal (MKEH), Hungary submitted samples of known activity of 54Mn to the International Reference System (SIR). The range of the activities submitted was from 480 kBq to 1530 kBq. The key comparison results for these three national metrology institutes (NMIs) have replaced their previous results in the matrix of degrees of equivalence in the key comparison database that contains eleven results, identifier BIPM.RI(II)-K1.Mn-54. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCRI Section II, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

  17. Analysis of geophysical logs, at North Penn Area 6 Superfund Site, Lansdale, Montgomery County, Pennsylvania

    Science.gov (United States)

    Conger, Randall W.

    1999-01-01

    The U.S. Geological Survey (USGS), as part of technical assistance to the U.S. Environmental Protection Agency (USEPA), collected borehole geophysical log data in 34 industrial, commercial, and public supply wells and 28 monitor wells at the North Penn Area 6 Superfund Site, in Lansdale, Pa., from August 22, 1995, through August 29, 1997. The wells range in depth from 50 to 1,027 feet below land surface and are drilled in Triassic-age shales and siltstones of the Brunswick Group and Lockatong Formation. The geophysical log data were collected to help describe the hydrogeologic framework in the area and to provide guidance in the reconstruction of the 28 monitor wells drilled during summer 1997. At the time of logging, all wells had open-hole construction. The geophysical logs, caliper, fluid-resistivity, and fluid-temperature, and borehole video logs were used to determine the vertical distribution of water-bearing fractures. Heatpulse-flowmeter measurements were used to determine vertical borehole flow under pumping and nonpumping conditions. The most productive fractures generally could be determined from heatpulse-flowmeter measurements under pumping conditions. Vertical borehole flow was measured under nonpumping conditions in most wells that had more than one water-bearing fracture. Upward flow was measured in 35 wells and probably is a result of natural head differences between fractures in the local ground-water-flow system. Downward flow was measured in 11 wells and commonly indicated differences in hydraulic heads of the fractures caused by nearby pumping. Both upward and downward flow was measured in three wells. No flow was detected in eight wells. Natural-gamma-ray logs were used to estimate the attitude of bedding. Thin shale marker beds, shown as spikes of elevated radioactivity in the natural-gamma logs of some wells throughout the area, enable the determination of bedding-plane orientation from three-point correlations. Generally, the marker beds in

  18. Geophysical logging and geologic mapping data in the vicinity of the GMH Electronics Superfund site near Roxboro, North Carolina

    Science.gov (United States)

    Chapman, Melinda J.; Clark, Timothy W.; Williams, John H.

    2013-01-01

    Geologic mapping, the collection of borehole geophysical logs and images, and passive diffusion bag sampling were conducted by the U.S. Geological Survey North Carolina Water Science Center in the vicinity of the GMH Electronics Superfund site near Roxboro, North Carolina, during March through October 2011. The study purpose was to assist the U.S. Environmental Protection Agency in the development of a conceptual groundwater model for the assessment of current contaminant distribution and future migration of contaminants. Data compilation efforts included geologic mapping of more than 250 features, including rock type and secondary joints, delineation of more than 1,300 subsurface features (primarily fracture orientations) in 15 open borehole wells, and the collection of passive diffusion-bag samples from 42 fracture zones at various depths in the 15 wells.

  19. Feasibility Study of Economics and Performance of Solar Photovoltaics at the Stringfellow Superfund Site in Riverside, California

    Energy Technology Data Exchange (ETDEWEB)

    Mosey, G.; Van Geet, O.

    2010-12-01

    This report presents the results of an assessment of the technical and economic feasibility of deploying a photovoltaics (PV) system on the Stringfellow Superfund Site in Riverside, California. The site was assessed for possible PV installations. The cost, performance, and site impacts of different PV options were estimated. The economics of the potential systems were analyzed using an electric rate of $0.13/kWh and incentives offered by Southern California Edison under the California Solar Initiative. According to the assessment, a government-owned, ground-mounted PV system represents a technically and economically feasible option. The report recommends financing options that could assist in the implementation of such a system.

  20. In situ field screening for polynuclear aromatic hydrocarbons with a portable spectrofluorometer at a Superfund site near Jackson, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    Amick, E.N.; Pollard, J.E. [Lockheed Environmental Systems and Technologies Co., Las Vegas, NV (United States); Engelmann, W.H. [Environmental Protection Agency, Las Vegas, NV (United States). Environmental Monitoring Systems Lab.; Vo-Dinh, T. [Oak Ridge National Lab., TN (United States). Advanced Monitoring Development Group

    1994-12-31

    The US Environmental Protection Agency`s (EPA) Environmental Monitoring Systems Laboratory in Las Vegas, Nevada (EMSL-LV) is currently evaluating the use of scanning ultraviolet-visible (UV-vis) fluorescence as a field screening technology. A prototype field-portable spectrofluorometer capable of excitation, emission, and synchronous scans has been developed and was field tested at the American Creosote Works Superfund site. The UV-vis fluorescence spectra of various polynuclear aromatic hydrocarbons (PAHs) were clearly seen in the synchronous spectra of soil samples extracted on site. Split soil samples were analyzed by gas chromatography/mass spectroscopy and by immunoassay methods. Although a comparison of results with these other methods has not been completed, the synchronous fluorescence method shows promise in that analytical results have the potential to provide compound- or class-selective results and can be immediately available on-site at a reasonable cost.

  1. Geophysical logging and thermal imaging near the Hemphill Road TCE National Priorities List Superfund site near Gastonia, North Carolina

    Science.gov (United States)

    Antolino, Dominick J.; Chapman, Melinda J.

    2017-03-27

    Borehole geophysical logs and thermal imaging data were collected by the U.S. Geological Survey near the Hemphill Road TCE (trichloroethylene) National Priorities List Superfund site near Gastonia, North Carolina, during August 2014 through February 2015. In an effort to assist the U.S. Environmental Protection Agency in the development of a conceptual groundwater model for the assessment of current contaminant distribution and future migration of contaminants, surface geological mapping and borehole geophysical log and thermal imaging data collection, which included the delineation of more than 600 subsurface features (primarily fracture orientations), was completed in five open borehole wells and two private supply bedrock wells. In addition, areas of possible groundwater discharge within a nearby creek downgradient of the study site were determined based on temperature differences between the stream and bank seepage using thermal imagery.

  2. Post-Remediation Biomonitoring of Pesticides in Marine Waters Near the United Heckathorn Superfund Site, Richmond, California

    Energy Technology Data Exchange (ETDEWEB)

    LD Antrim; NP Kohn

    2000-09-05

    This report, PNNL-11911 Rev. 1, was published in July 2000 and replaces PNNL-11911, which was published in September 1998. The revision corrects tissue concentration units that were reported as dry weight but were actually wet weight, and updates conclusions based on the correct reporting units. Marine sediment remediation at the United Heckathorn Superfund Site was completed in April 1997. Water and mussel tissues were sampled in January 1998 from four stations near Lauritzen Canal in Richmond, California, for the first post-remediation monitoring of marine areas near the United Heckathorn Site. Dieldrin and DDT were analyzed in water samples, tissue samples from resident mussels, and tissue samples from transplanted mussels deployed for 4 months. Concentrations of dieldrin and total DDT in water and total DDT in tissue were compared to pre-remediation data available from the California State Mussel Watch program (tissues) and the Ecological Risk Assessment for the United Heckathorn Superfund Site (tissues and water). Chlorinated pesticide concentrations in water samples were similar to pre-remediation levels and did not meet remediation goals. Mean dieldrin concentrations in water ranged from 0.65 ng/L to 18.1 ng/L and were higher than the remediation goal (0.14 ng/L) at all stations. Mean total DDT concentrations in water ranged from 0.65 ng/L to 103 ng/L and exceeded the remediation goal of 0.59 ng/L. The highest concentrations of both pesticides were found in Lauritzen Canal, and the lowest levels were from the Richmond Inner Harbor Channel water. Unusual amounts of detritus in the water column at the time of sampling, particularly in Lauritzen Canal, could have contributed to the elevated pesticide concentrations and poor analytical precision.

  3. Aquatic assessment of the Pike Hill Copper Mine Superfund site, Corinth, Vermont

    Science.gov (United States)

    Piatak, Nadine M.; Argue, Denise M.; Seal, Robert R.; Kiah, Richard G.; Besser, John M.; Coles, James F.; Hammarstrom, Jane M.; Levitan, Denise M.; Deacon, Jeffrey R.; Ingersoll, Christopher G.

    2013-01-01

    The Pike Hill Copper Mine Superfund site in Corinth, Orange County, Vermont, includes the Eureka, Union, and Smith mines along with areas of downstream aquatic ecosystem impairment. The site was placed on the U.S. Environmental Protection Agency (USEPA) National Priorities List in 2004. The mines, which operated from about 1847 to 1919, contain underground workings, foundations from historical structures, several waste-rock piles, and some flotation tailings. The mine site is drained to the northeast by Pike Hill Brook, which includes several wetland areas, and to the southeast by an unnamed tributary that flows to the south and enters Cookville Brook. Both brooks eventually drain into the Waits River, which flows into the Connecticut River. The aquatic ecosystem at the site was assessed using a variety of approaches that investigated surface-water quality, sediment quality, and various ecological indicators of stream-ecosystem health. The degradation of surface-water quality is caused by elevated concentrations of copper, and to a lesser extent cadmium, with localized effects caused by aluminum, iron, and zinc. Copper concentrations in surface waters reached or exceeded the USEPA national recommended chronic water-quality criteria for the protection of aquatic life in all of the Pike Hill Brook sampling locations except for the location farthest downstream, in half of the locations sampled in the tributary to Cookville Brook, and in about half of the locations in one wetland area located in Pike Hill Brook. Most of these same locations also contained concentrations of cadmium that exceeded the chronic water-quality criteria. In contrast, surface waters at background sampling locations were below these criteria for copper and cadmium. Comparison of hardness-based and Biotic Ligand Model (BLM)-based criteria for copper yields similar results with respect to the extent or number of stations impaired for surface waters in the affected area. However, the BLM

  4. Influence of a chlor-alkali superfund site on mercury bioaccumulation in periphyton and low-trophic level fauna

    Science.gov (United States)

    Buckman, Kate L.; Marvin-DiPasquale, Mark C.; Taylor, Vivien F.; Chalmers, Ann T.; Broadley, Hannah J.; Agee, Jennifer L.; Jackson, Brian P.; Chen, Celia Y.

    2015-01-01

    In Berlin, New Hampshire, USA, the Androscoggin River flows adjacent to a former chlor-alkali facility that is a US Environmental Protection Agency Superfund site and source of mercury (Hg) to the river. The present study was conducted to determine the fate and bioaccumulation of methylmercury (MeHg) to lower trophic-level taxa in the river. Surface sediment directly adjacent to the source showed significantly elevated MeHg (10–40× increase, mean ± standard deviation [SD]: 20.1 ± 24.8 ng g–1 dry wt) and total mercury (THg; 10–30× increase, mean ± SD: 2045 ± 2669 ng g–1 dry wt) compared with all other reaches, with sediment THg and MeHg from downstream reaches elevated (3–7× on average) relative to the reference (THg mean ± SD: 33.5 ± 9.33 ng g–1 dry wt; MeHg mean ± SD: 0.52 ± 0.21 ng g–1 dry wt). Water column THg concentrations adjacent to the point source for both particulate (0.23 ng L–1) and dissolved (0.76 ng L–1) fractions were 5-fold higher than at the reference sites, and 2-fold to 5-fold higher than downstream. Methylmercury production potential of periphyton material was highest (2–9 ng g–1 d–1 dry wt) adjacent to the Superfund site; other reaches were close to or below reporting limits (0. 1 ng g–1 d–1 dry wt). Total Hg and MeHg bioaccumulation in fauna was variable across sites and taxa, with no clear spatial patterns downstream of the contamination source. Crayfish, mayflies, and shiners showed a weak positive relationship with porewater MeHg concentration.

  5. Evaluation of borehole geophysical and video logs, at Butz Landfill Superfund Site, Jackson Township, Monroe County, Pennsylvania

    Science.gov (United States)

    Low, D.J.; Conger, R.W.

    2001-01-01

    Between February 1996 and November 2000, geophysical logging was conducted in 27 open borehole wells in and adjacent to the Butz Landfill Superfund Site, Jackson Township, Monroe County, Pa., to determine casing depth and depths of water-producing zones, water-receiving zones, and zones of vertical borehole flow. The wells range in depth from 57 to 319 feet below land surface. The geophysical logging determined the placement of well screens and packers, which allow monitoring and sampling of water-bearing zones in the fractured bedrock so that the horizontal and vertical distribution of contaminated ground water migrating from known sources could be determined. Geophysical logging included collection of caliper, natural-gamma, single-point-resistance, fluid-resistivity, fluid-temperature, and video logs. Caliper and video logs were used to locate fractures, joints, and weathered zones. Inflections on single-point-resistance, fluid-temperature, and fluid-resistivity logs indicated possible water-bearing fractures, and heatpulse-flowmeter measurements verified these locations. Natural-gamma logs provided information on stratigraphy.

  6. Using a triad approach in the assessment of hazardous waste site leaching from a Superfund site to an adjacent stream

    Energy Technology Data Exchange (ETDEWEB)

    Leppanen, C.J. [Univ. of Maine, Orono, ME (United States). Dept. of Biochemistry, Microbiology, and Molecular Biology; Blanner, P.M.; Allan, R.S.; Maier, K.J. [Univ. of Memphis, TN (United States); Benson, W.H. [Univ. of Mississippi, University, MS (United States)

    1998-10-01

    A triad approach was used in the evaluation of sediment in the Wolf River adjacent to the North Hollywood Dump, a federally listed Superfund site. Chemical analyses were done for 18 organochlorine pesticides, 21 polychlorinated biphenyl (PCB) congeners, and 10 metals. Sediment toxicity was evaluated with freshwater invertebrates. Chironomus tentans and Hyalella azteca. Benthic macroinvertebrate diversity and abundance were assessed with a family-level biotic index. Mean Al, Ba, Cd, Cu, Fe, Ni, Pb, and Zn concentrations were significantly higher in sediments collected in the spring. Both spring and fall sediments exhibited toxicity downstream from, adjacent to, and upstream from the dump, with toxicity significantly higher in fall sediments; however, a consistent trend was not observed. Toxicity was typically greater in the fall, and metal concentrations were typically higher in spring sediments, suggesting that metals were not responsible for the toxicity. Sediment-associated organochlorine pesticide and PCB congener concentrations were all below detectable limits, suggesting that these potential contaminants are not contributing to the observed toxicity. No differences were found in benthic macroinvertebrate community structure, which was composed of predominantly pollution-tolerant families, among seasons or river reaches, which appear to be limited by the physical characteristics of the river. Sediments in urban reaches of the Wolf River appear to be degraded; the North Hollywood Dump cannot be isolated as a source of toxicity in this study. In situ testing, sediment toxicity identification and evaluation testing, acid-volatile sulfide analyses, or artificial substrate work would be appropriate to follow.

  7. Superfund record of decision (EPA Region 9): McClellan Air Force Base, Basewide Groundwater Operable Unit, Sacramento, CA, May 11, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The Interim Record of Decision (ROD) presents the interim remedial action for the Groundwater Operable Unit (Groundwater OU) at the McClellan Air Force Base (McClellan AFB) Superfund site in Sacramento, California. The Groundwater OU addresses all of the VOC-contaminated groundwater at McClellan AFB. The Groundwater OU remedy is designed to prevent the spread of contamination that is already in the groundwater by containing groundwater with concentrations greater than maximum contaminant levels (MCLs). The remedy is also designed to remove to the maximum extent practicable the mass of contamination that lies in that volume of the groundwater.

  8. Relating Magnetic Parameters to Heavy Metal Concentrations and Environmental Factors at Formosa Mine Superfund Site, Douglas County, OR

    Science.gov (United States)

    Upton, T. L.

    2016-12-01

    Advances in the field of environmental magnetism have led to exciting new applications for this field. Magnetic minerals are ubiquitous in the environment and tend to have an affinity for heavy metals. Hence, it has been demonstrated that magnetic properties are often significantly related to concentrations of heavy metals and other pollutants. As a result, magnetic techniques have been used as proxy for determining hot spots of several types of pollution produced from a diversity of anthropogenic sources. Magnetic measurements are non-destructive and relatively inexpensive compared to geochemical analyses. The utility of environmental magnetic methods varies widely depending on biological, chemical and physical processes that create and transform soils and sediments. Applications in the direction of mapping heavy metals have been studied and shown to be quite useful in countries such as China and India but to date, little research has been done in the US. As such, there is need to expand the scope of research to a wider range of soil types and land uses, especially within the US. This study investigates the application of environmental magnetic techniques to mapping of heavy metal concentrations at the Formosa Mine Superfund Site, an abandoned mine about 25 miles southwest of Roseburg, OR. The soils and sediment at this site are derived from pyrite-rich bedrock which is weak in terms of magnetic susceptibility. Using hotspot analysis, correlation and cluster analyses, interactions between metals and magnetic parameters are investigated in relation to environmental factors such as proximity to seeps and adits. Preliminary results suggest significant correlation of magnetic susceptibility with certain heavy metals, signifying that magnetic methods may be useful in mapping heavy metal hotspots at this site. Further analysis examines the relation of various land use differences in magnetic signatures obtained throughout the Cow Creek watershed.

  9. Activity measurements of the radionuclide {sup 54}Mn for the L.N.E.-L.N.H.B., France, N.P.L., United Kingdom and the M.K.E.H., Hungary, in the ongoing comparison B.I.P.M..R.I.(2)-K1.Mn-54

    Energy Technology Data Exchange (ETDEWEB)

    Ratel, G.; Michotte, C.; Kryeziu, D. [Bureau International des Poids et Mesures (BIPM), 92 - Sevres (France); Moune, M.; K [CEA Saclay, Laboratoire National Henri Becquer (LNE-LNHB), 91 - Gif sur Yvette (France); Keightley, J.; Johanson, L. [National Physical Laboratory (NPL) (United Kingdom); Szucs, L.; Csete, I. [MKEH, Budapest (Hungary)

    2008-08-15

    In 2006, the Laboratoire national de metrologie et essais- Laboratoire national Henri becquerel (L.N.E.- L.N.H.B.), France, the National physical laboratory (N.P.L.), UK and the magyar kereskedelmi Engedelyezesi Hivatal (M.K.E.H.), hungary submitted samples of known activity of {sup 54}Mn to the International reference system (S.I.R.). The range of the activities submitted was from 480 kBq to 1530 kBq. the key comparison results for these three national metrology institutes (N.M.I.) have replaced their previous results in the matrix of degrees of equivalence in the key comparison database that contains eleven results, identifier B.I.P.M..R.I.(2)-KI.Mn-54. (authors)

  10. Activity measurements of the radionuclide {sup 201}Tl for the L.N.E.-L.N.H.B., France, P.T.B., Germany and the N.P.L., UK in the ongoing comparison B.I.P.M..R.I.(2)-K1.TI-201

    Energy Technology Data Exchange (ETDEWEB)

    Ratel, G.; Michotte, C. [Bureau International des Poids et Mesures (BIPM), 92 - Sevres (France); Moune, M.; Bobin, C. [CEA Saclay, Laboratoire National Henri Becquer (LNE-LNHB), 91 - Gif sur Yvette (France); Kossert, K. [Physikalisch-Technischen Bundesanstalt (PTB) (Germany); Johansson, L. [National Physical Laboratory (NPL) (United Kingdom)

    2008-08-15

    In 2005, the Laboratoire national de metrologie et essais- Laboratoire national Henri becquerel (L.N.E.- L.N.H.B.) and the Physikalisch-technische bundesanstalt (P.T.B.) each submitted a sample of known activity of {sup 201}Tl to the International reference system (S.I.R.). In 2006, the National physical laboratory (N.P.L.) submitted their first sample. The range of values of the activity submitted was between 2 MBq and 63 MBq. These key comparison results have been included in the re-evaluated key comparison reference value and replaced the previous results for france and Germany in the matrix of degrees of equivalence in the key comparison database that now contains seven results, identifier B.I.P.M..R.I.(2)-KI.Tl-201. (authors)

  11. A review of the Texas, USA San Jacinto Superfund site and the deposition of polychlorinated dibenzo-p-dioxins and dibenzofurans in the San Jacinto River and Houston Ship Channel.

    Science.gov (United States)

    Iyer, Rupa; Aggarwal, Juhi; Iken, Brian

    2016-12-01

    The San Jacinto River (SJR) waste pits that lie just under the 1-10 overpass in eastern Harris County east of Houston, Texas, USA, were created in the 1960s as dumping grounds for paper mill waste. The deposition of this waste led to accumulation of highly toxic polychlorinated dibenzo-p-dioxins and dibenzofurans (PCCDDs/PCDFs) over the course of several decades. After abandonment, the waste material eventually became submerged under the waters of the SJR, resulting in widespread environmental contamination that currently constitutes a significant health concern for eastern Harris County communities. The original waste pits were rediscovered in 2005, and the San Jacinto waste site is now a designated EPA superfund site. The objective of this review then is to discuss the history and current state of containment around the San Jacinto waste pits and analyze spatial and temporal trends in the PCDD/PCDF deposition through the SJR system from the data available. We will discuss the current exposure and health risks represented by the Superfund site and the SJR system itself, as well as the discovery of liver, kidney, brain (glioma), and retinoblastoma cancer clusters in eastern Harris County across multiple census tracts that border the Superfund site. We will also cover the two primary management options, containment versus removal of the waste from the Superfund and provide recommendations for increased monitoring of existing concentrations of polychlorinated waste in the SJR and its nearby associated communities.

  12. TREATABILITY STUDY REPORT OF GREEN MOUNTAIN LABORATORIES, INC.'S BIOREMEDIATION PROCESS, TREATMENT OF PCB CONTAMINATED SOILS, AT BEEDE WASTE OIL/CASH ENERGY SUPERFUND SITE, PLAISTOW, NEW HAMPSHIRE

    Science.gov (United States)

    In 1998, Green Mountain Laboratories, Inc. (GML) and the USEPA agreed to carry out a Superfund Innovative Technology Evaluation (SITE) project to evaluate the effectiveness of GML's Bioremediation Process for the treatment of PCB contaminated soils at the Beede Waste Oil/Cash Ene...

  13. EPA Encourages the Public to Provide Input on Plan to Address Contaminated Groundwater at Curtis Specialty Papers Superfund Site in Milford and Alexandria Township, New Jersey, Public Meeting to Take Place May 28

    Science.gov (United States)

    (New York, N.Y.) The U.S. Environmental Protection Agency has proposed a plan to clean up contaminated groundwater at the Curtis Specialty Papers Superfund site in Milford and Alexandria Township, New Jersey. The site includes the 86-acre historic former M

  14. Cyclodiene insecticide, DDE, DDT, arsenic, and mercury contamination of big brown bats (Eptesicus fuscus) foraging at a Colorado Superfund site

    Science.gov (United States)

    O'Shea, T.J.; Everette, A.L.; Ellison, L.E.

    2001-01-01

    Rocky Mountain Arsenal (RMA) National Wildlife Area, near Denver, Colorado, is a Superfund site contaminated by past military and industrial uses, including pesticide manufacturing. From an ecosystem standpoint, the most critical contaminants at RMA are certain cyclodiene insecticides and metabolites, p,p???-DDE, p,p???-DDT, arsenic, and mercury. Bats are important ecosystem components that can be impacted by persistent contaminants because of their position in the food chain and their potential longevity and thus duration of exposure. Big brown bats (Eptesicus fuscus) were captured (n = 51) while foraging at RMA in the summers of 1997 and 1998 for determination of concentrations of contaminants of concern in carcasses, brains, and stomach contents. Adult females (n = 15) were also tracked by radiotelemetry to determine locations of nearest maternity roosts for sampling of guano for contaminant analysis and inspection for potential contaminant-induced mortality. Bats captured while foraging at RMA had measurable quantities of dieldrin and DDE in masticated insect samples from stomach contents and significantly higher concentrations of dieldrin, DDE, DDT, and mercury (juveniles) in carcasses than big brown bats (n = 26) sampled at a reference area 80 km to the north. Concentrations of dieldrin and DDE in brains of bats captured while foraging at RMA were also greater than in bats from the reference area, but not high enough to suggest mortality. Maximum concentrations of DDE, DDT, and cyclodienes in brains of big brown bats were found in adult males from RMA. Guano from the two closest known roosts had significantly higher concentrations of dieldrin, DDE, and mercury than guano from two roosts at the reference area. Dieldrin concentrations in carcasses of bats from RMA were highest in juveniles, followed by adult males and adult females. DDE concentrations in carcasses were lowest in adult females at both sites and highest in adult males at RMA. No contaminant

  15. Description of borehole geophysical and geologist logs, Berks Sand Pit Superfund Site, Longswamp Township, Berks County, Pennsylvania

    Science.gov (United States)

    Low, Dennis J.; Conger, Randall W.

    2003-01-01

    Between October 2002 and January 2003, geophysical logging was conducted in six boreholes at the Berks Sand Pit Superfund Site, Longswamp Township, Berks County, Pa., to determine (1) the waterproducing zones, water-receiving zones, zones of vertical borehole flow, orientation of fractures, and borehole and casing depth; and (2) the hydraulic interconnection between the six boreholes and the site extraction well. The boreholes range in depth from 61 to 270 feet. Geophysical logging included collection of caliper, natural-gamma, single-point-resistance, fluid-temperature, fluid-flow, and acoustic-televiewer logs. Caliper and acoustic-televiewer logs were used to locate fractures, joints, and weathered zones. Inflections on fluid-temperature and single-point-resistance logs indicated possible water-bearing fractures, and flowmeter measurements verified these locations. Single-point-resistance, natural-gamma, and geologist logs provided information on stratigraphy. Flowmeter measurements were conducted while the site extraction well was pumping and when it was inactive to determine the hydraulic connections between the extraction well and the boreholes. Borehole geophysical logging and heatpulse flowmetering indicate active flow in the boreholes. Two of the boreholes are in ground-water discharge areas, two boreholes are in ground-water recharge areas, and one borehole is in an intermediate regime. Flow was not determined in one borehole. Heatpulse flowmetering, in conjunction with the geologist logs, indicates highly weathered zones in the granitic gneiss can be permeable and effective transmitters of water, confirming the presence of a two-tiered ground-water-flow system. The effort to determine a hydraulic connection between the site extraction well and six logged boreholes was not conclusive. Three boreholes showed decreases in depth to water after pumping of the site extraction well; in two boreholes, the depth to water increased. One borehole was cased its

  16. Real-Time and Delayed Analysis of Tree and Shrub Cores as Indicators of Subsurface Volatile Organic Compound Contamination, Durham Meadows Superfund Site, Durham, Connecticut, August 29, 2006

    Science.gov (United States)

    Vroblesky, Don A.; Willey, Richard E.; Clifford, Scott; Murphy, James J.

    2008-01-01

    This study examined volatile organic compound concentrations in cores from trees and shrubs for use as indicators of vadose-zone contamination or potential vapor intrusion by volatile organic compounds into buildings at the Durham Meadows Superfund Site, Durham, Connecticut. The study used both (1) real-time tree- and shrub-core analysis, which involved field heating the core samples for 5 to 10 minutes prior to field analysis, and (2) delayed analysis, which involved allowing the gases in the cores to equilibrate with the headspace gas in the sample vials unheated for 1 to 2 days prior to analysis. General correspondence was found between the two approaches, indicating that preheating and field analysis of vegetation cores is a viable approach to real-time monitoring of subsurface volatile organic compounds. In most cases, volatile organic compounds in cores from trees and shrubs at the Merriam Manufacturing Company property showed a general correspondence to the distribution of volatile organic compounds detected in a soil-gas survey, despite the fact that most of the soil-gas survey data in close proximity to the relevant trees were collected about 3 years prior to the tree-core collection. Most of the trees cored at the Durham Meadows Superfund Site, outside of the Merriam Manufacturing Company property, contained no volatile organic compounds and were in areas where indoor air sampling and soil-gas sampling showed little or no volatile organic compound concentrations. An exception was tree DM11, which contained barely detectable concentrations of trichloroethene near a house where previous investigations found low concentrations of trichloroethene (0.13 to 1.2 parts per billion by volume) in indoor air and 7.7 micrograms per liter of trichloroethene in the ground water. The barely detectable concentration of trichloroethene in tree DM11 and the lack of volatile organic compound detection in nearby tree DM10 (adjacent to the well having 7.7 micrograms of

  17. Treatability Study of In Situ Technologies for Remediation of Hexavalent Chromium in Groundwater at the Puchack Well Field Superfund Site, New Jersey

    Energy Technology Data Exchange (ETDEWEB)

    Vermeul, Vince R.; Szecsody, Jim E.; Truex, Michael J.; Burns, Carolyn A.; Girvin, Donald C.; Phillips, Jerry L.; Devary, Brooks J.; Fischer, Ashley E.; Li, Shu-Mei W.

    2006-11-13

    This treatability study was conducted by Pacific Northwest National Laboratory (PNNL), at the request of the U. S. Environmental Protection Agency (EPA) Region 2, to evaluate the feasibility of using in situ treatment technologies for chromate reduction and immobilization at the Puchack Well Field Superfund Site in Pennsauken Township, New Jersey. In addition to in situ reductive treatments, which included the evaluation of both abiotic and biotic reduction of Puchack aquifer sediments, natural attenuation mechanisms were evaluated (i.e., chromate adsorption and reduction). Chromate exhibited typical anionic adsorption behavior, with greater adsorption at lower pH, at lower chromate concentration, and at lower concentrations of other competing anions. In particular, sulfate (at 50 mg/L) suppressed chromate adsorption by up to 50%. Chromate adsorption was not influenced by inorganic colloids.

  18. err aA spatial evaluation of socio demographics surrounding National Priorities List sites in Florida using a distance-based approach

    Directory of Open Access Journals (Sweden)

    Kiros Gebre-Egziabher

    2009-06-01

    Full Text Available Abstract Background Over the last two decades, various spatial techniques have been demonstrated using geographical information systems (GIS to adequately estimate and characterize inequities of minority populations living near environmentally hazardous facilities. However, these methods have produced mixed results. In this study, we use recently developed variations of the "distance based" approach to spatially evaluate and compare demographic and socioeconomic disparities surrounding the worst hazardous waste sites in Florida. Methods We used data from the 2000 US Census Bureau and the Florida Department of Environmental Protection to identify selected socio and economic variables within one (1 mile of 71 National Priorities List (NPL or Superfund sites in Florida. ArcMap (ESRI, v. 9.2 was used to map the centroid locations of each of the NPL sites as well as identify and estimate the number of host and non-host tracts. The unit of analysis in this study was at the census tract level. Logistic regression (SAS v9.1.3 was used to determine if race/ethnicity and socioeconomic indicators are significant predictors of the location of NPL sites. Results There were significant differences in race/ethnicity composition and socio-economic factors between NPL host census tracts and non-host census tracts in Florida. The percentages of Blacks (OR = 5.7, p Conclusion The recently developed distance-based method supports previous studies and suggests that race and ethnicity play substantial roles in where hazardous facilities are located in Florida. Recommendations include using distance-based methods to evaluate socio and demographic characteristics surrounding other less known environmental hazardous facilities, such as landfills, or Toxic Release Inventory (TRI sites.

  19. Direct observation of heavy metal-mineral association from the Clark Fork River Superfund Complex: Implications for metal transport and bioavailability

    Science.gov (United States)

    Hochella, M.F.; Moore, J.N.; Putnis, C.V.; Putnis, A.; Kasama, T.; Eberl, D.D.

    2005-01-01

    Two sets of samples from riverbeds and adjacent floodplains, separated by 80 river kilometers, were collected from the Clark Fork River Superfund Complex, Montana, (the largest Superfund site in the United States), and studied primarily with transmission electron microscopy (TEM) with several supporting techniques to determine heavy metal-mineral association. Seven of the eight samples studied were strongly influenced by material that once resided in mining and smelting dumps and impoundments; this material was transported downstream sometime during the last century and a half from the Butte/Anaconda areas. The eighth sample was from a deeper floodplain level and dates to premining days. The TEM observations afford a direct look, down to the nanometer level, at secondary mineral formation as a result of the breakdown of sulfides and silicates in the acid environment of this massive mine-drainage system. In the shallow, oxic floodplain sediments, heavy metals of concern in this system (As, Cu, Pb, and Zn) are taken up by the formation of sulfates (particularly Pb in jarosite), as well as hydrous metal oxides (As, Cu, Pb, and Zn in and on ferrihydrite, and a possibly new vernadite-like mineral). The oxides are long-lived in these systems, as they were also found in the anoxic riverbeds. Metals are also taken up by the formation of sulfides in sulfate-reducing environments as observed in the formation of nanoclusters of chalcopyrite and sphalerite. In all samples, clays make up between 5 and 20% of the sediment and carry significant amounts of Cu and Zn. The hydrous oxides, secondary sulfides, and clays provide several routes for metal transport downstream over long distances. Besides the potential bioavailability of heavy metals exchanged on and off the hydrous metal oxides and clays, nanometer-sized sulfides may also be highly reactive in the presence of biologic systems. Copyright ?? 2005 Elsevier Ltd.

  20. Post-Remediation Biomonitoring of Pesticides and Other Contaminants in Marine Waters and Sediment Near the United Heckathorn Superfund Site, Richmond, California

    Energy Technology Data Exchange (ETDEWEB)

    LD Antrim; NP Kohn

    2000-09-06

    This report, PNNL-1 3059 Rev. 1, was published in July 2000 and replaces PNNL-1 3059 which is dated October 1999. The revision corrects tissue concentration units that were reported as dry weight but were actually wet weight, and updates conclusions based on the correct reporting units. Marine sediment remediation at the United Heckathorn Superfund Site was completed in April 1997. Water and mussel tissues were sampled in February 1999 from four stations near Lauritzen Canal in Richmond, California, for Year 2 of post-remediation monitoring of marine areas near the United Heckathom Site. Dieldrin and dichlorodiphenyl trichloroethane (DDT) were analyzed in water samples, tissue samples from resident mussels, and tissue samples from transplanted mussels deployed for 4 months. Concentrations of dieldrin and total DDT in water and total DDT in tissue were compared with Year 1 of post-remediation monitoring, and with preremediation data from the California State Mussel Watch program (tissue s) and the Ecological Risk Assessment for the United Heckathorn Superfund Site (tissues and water). Mussel tissues were also analyzed for polychlorinated biphenyls (PCB), which were detected in sediment samples. Chlorinated pesticide concentrations in water samples were similar to preremediation levels and did not meet remediation goals. Mean dieldrin concentrations in water ranged from 0.62 ng/L to 12.5 ng/L and were higher than the remediation goal (0.14 ng/L) at all stations. Mean total DDT concentrations in water ranged from 14.4 ng/L to 62.3 ng/L and exceeded the remediation goal (0.59 ng/L) at all stations. The highest concentrations of both DDT and dieldrin were found at the Lauritzen Canal/End station. Despite exceedence of the remediation goals, chlorinated pesticide concentrations in Lauritzen Canal water samples were notably lower in 1999 than in 1998. PCBS were not detected in water samples in 1999.

  1. Arsenic species in weathering mine tailings and biogenic solids at the Lava Cap Mine Superfund Site, Nevada City, CA

    Directory of Open Access Journals (Sweden)

    Ashley Roger P

    2011-01-01

    Full Text Available Abstract Background A realistic estimation of the health risk of human exposure to solid-phase arsenic (As derived from historic mining operations is a major challenge to redevelopment of California's famed "Mother Lode" region. Arsenic, a known carcinogen, occurs in multiple solid forms that vary in bioaccessibility. X-ray absorption fine-structure spectroscopy (XAFS was used to identify and quantify the forms of As in mine wastes and biogenic solids at the Lava Cap Mine Superfund (LCMS site, a historic "Mother Lode" gold mine. Principal component analysis (PCA was used to assess variance within water chemistry, solids chemistry, and XAFS spectral datasets. Linear combination, least-squares fits constrained in part by PCA results were then used to quantify arsenic speciation in XAFS spectra of tailings and biogenic solids. Results The highest dissolved arsenic concentrations were found in Lost Lake porewater and in a groundwater-fed pond in the tailings deposition area. Iron, dissolved oxygen, alkalinity, specific conductivity, and As were the major variables in the water chemistry PCA. Arsenic was, on average, 14 times more concentrated in biologically-produced iron (hydroxide than in mine tailings. Phosphorous, manganese, calcium, aluminum, and As were the major variables in the solids chemistry PCA. Linear combination fits to XAFS spectra indicate that arsenopyrite (FeAsS, the dominant form of As in ore material, remains abundant (average: 65% in minimally-weathered ore samples and water-saturated tailings at the bottom of Lost Lake. However, tailings that underwent drying and wetting cycles contain an average of only 30% arsenopyrite. The predominant products of arsenopyrite weathering were identified by XAFS to be As-bearing Fe (hydroxide and arseniosiderite (Ca2Fe(AsO43O3•3H2O. Existence of the former species is not in question, but the presence of the latter species was not confirmed by additional measurements, so its identification is

  2. Superfund Programmatic Information

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes an inventory of program policy and guidance documents that are used by the EPA regions, states, tribes and private parties to implement the...

  3. Hydrogeologic framework, arsenic distribution, and groundwater geochemistry of the glacial-sediment aquifer at the Auburn Road landfill superfund site, Londonderry, New Hampshire

    Science.gov (United States)

    Degnan, James R.; Harte, Philip T.

    2013-01-01

    Leachate continues to be generated from landfills at the Auburn Road Landfill Superfund Site in Londonderry, New Hampshire. Impermeable caps on the three landfills at the site inhibit direct infiltration of precipitation; however, high water-table conditions allow groundwater to interact with landfill materials from below, creating leachate and ultimately reducing conditions in downgradient groundwater. Reducing conditions can facilitate arsenic transport by allowing it to stay in solution or by liberating arsenic adsorbed to surfaces and from geologic sources, such as glacial sediments and bedrock. The site occupies a 180-acre parcel of land containing streams, ponds, wetlands, and former gravel pits located in glacial sediment. Four areas, totaling 14 acres, including three landfills and one septage lagoon, were used for waste disposal. The site was closed in 1980 after volatile organic compounds associated with industrial waste dumping were detected. The site was added to the U.S. Environmental Protection Agency National Priority List in 1982, and the landfills were capped in 1996. Although volatile organic compound concentrations in groundwater have declined substantially, some measurable concentrations remain. Temporally variable and persistent elevated arsenic concentrations have been measured in groundwater affected by the landfill leachate. Microbial consumption of carbon found in leachate is a driver of reducing conditions that liberate arsenic at the site. In addition to sources of carbon in landfill leachate, wetland areas throughout the site also could contribute carbon to groundwater, but it is currently unknown if any of the wetland areas have downward or reversing gradients that could allow the infiltration of surface water to groundwater. Red-stained sediments and water indicate iron-rich groundwater discharge to surface water and are also associated with elevated concentrations of arsenic in sediment and groundwater. Ironrich groundwater seeps have

  4. Investigations of groundwater system and simulation of regional groundwater flow for North Penn Area 7 Superfund site, Montgomery County, Pennsylvania

    Science.gov (United States)

    Senior, Lisa A.; Goode, Daniel J.

    2013-01-01

    Groundwater in the vicinity of several industrial facilities in Upper Gwynedd Township and vicinity, Montgomery County, in southeast Pennsylvania has been shown to be contaminated with volatile organic compounds (VOCs), the most common of which is the solvent trichloroethylene (TCE). The 2-square-mile area was placed on the National Priorities List as the North Penn Area 7 Superfund site by the U.S. Environmental Protection Agency (USEPA) in 1989. The U.S. Geological Survey (USGS) conducted geophysical logging, aquifer testing, and water-level monitoring, and measured streamflows in and near North Penn Area 7 from fall 2000 through fall 2006 in a technical assistance study for the USEPA to develop an understanding of the hydrogeologic framework in the area as part of the USEPA Remedial Investigation. In addition, the USGS developed a groundwater-flow computer model based on the hydrogeologic framework to simulate regional groundwater flow and to estimate directions of groundwater flow and pathways of groundwater contaminants. The study area is underlain by Triassic- and Jurassic-age sandstones and shales of the Lockatong Formation and Brunswick Group in the Mesozoic Newark Basin. Regionally, these rocks strike northeast and dip to the northwest. The sequence of rocks form a fractured-sedimentary-rock aquifer that acts as a set of confined to partially confined layers of differing permeabilities. Depth to competent bedrock typically is less than 20 ft below land surface. The aquifer layers are recharged locally by precipitation and discharge locally to streams. The general configuration of the potentiometric surface in the aquifer is similar to topography, except in areas affected by pumping. The headwaters of Wissahickon Creek are nearby, and the stream flows southwest, parallel to strike, to bisect North Penn Area 7. Groundwater is pumped in the vicinity of North Penn Area 7 for industrial use, public supply, and residential supply. Results of field investigations

  5. KEY COMPARISON: Update of the BIPM comparison BIPM.RI(II)-K1.Ho-166m activity measurements to include the IRA and the NPL and a re-evaluation of the degrees of equivalence for the APMP.RI(II)-K2.Ho-166m comparison

    Science.gov (United States)

    Michotte, C.; Ratel, G.; Courte, S.; Nedjadi, Y.; Bailat, C.; Johansson, L.; Hino, Y.

    2009-01-01

    The IRA and the NPL have submitted ampoules of 166Hom to the International Reference System (SIR) for activity comparison at the Bureau International des Poids et Mesures, thus becoming the third and fourth participants since 1989. The five samples of known activity of 166Hom now recorded in the SIR have activities between about 70 kBq and 500 kBq. The new results have enabled a re-evaluation of the key comparison reference value, and the degrees of equivalence between each equivalent activity measured in the SIR and the key comparison reference value (KCRV) have been calculated. The results are given in the form of a matrix for these four NMIs together with the recalculated degrees of equivalence of an APMP regional comparison held in 2000, comparison identifier APMP.RI(II)-K2.Ho-166m for six other NMIs. A graphical presentation is also given. Main text. To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCRI Section II, according to the provisions of the CIPM Mutual Recognition Arrangement (MRA).

  6. Mercury characterization in Lahotan Valley Wetlands

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — In 1999, the Nevada Fish and Wildlife Office of the U.S. Fish and Wildlife Service and the Superfund Division, U.S. Environmental Protection Agency, Region 9...

  7. Comprehensive Environmental Response, Compensation, and Liability Act, as amended by the Superfund Amendments and Reauthorization Act Section 120(e)(5). Annual report to Congress for Fiscal year 1992

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    The US Department of Energy (DOE) is committed to conducting its operations in a safe and environmentally sound manner. High priorities for the Department are identifying and correcting environmental problems at DOE facilities that resulted from past operations, and preventing environmental problems from occurring during present and future operations. In this regard, the Department is committed to clean up the 1989 inventory of sites in the Environmental Restoration Program by the year 2019. DOE has issued an Order and guidance establishing policy and procedures for activities conducted under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended by the Superfund Amendments and Reauthorization Act (SARA), and has developed a Five-Year Plan, updated annually, that integrates planning for corrective activities, environmental restoration and waste management operations at its facilities. DOE also continues to conduct assessments (e.g., Management Audits, Environmental Safety and Health (ES & H) Progress Assessments, Internal Self Assessments) at its operating facilities to provide the Secretary of Energy with information on current environmental compliance status and follow-up on findings.

  8. Evaluation of geophysical logs and slug tests, phase II, at AIW Frank/Mid-County Mustang Superfund Site, Chester County, Pennsylvania

    Science.gov (United States)

    Conger, R.W.; Goode, D.J.; Sloto, R.A.

    2000-01-01

    Between September 1997 and October 1998, nine monitor wells were drilled at the AIW Frank/Mid-County Mustang Superfund Site in Chester County, Pa., to determine the horizontal and vertical distribution of contaminated ground water migrating from known contaminant sources. The U.S. Geological Survey conducted borehole geophysical logging and borehole television surveys in these boreholes to identify water-producing zones so that appropriate intervals could be screened in each borehole. Caliper logs and borehole television surveys were used to locate fractures; inflections on fluid-temperature and fluid-resistivity logs were used to locate possible water-bearing fractures, and heatpulseflowmeter measurements verified these locations. The borehole television surveys indicated that locally, the rocks of the Conestoga Limestone and Ledger Dolomite that underlie the site strike generally from northeast-southwest to east-west and dip steeply to the southeast and south approximately 63? to 76?. Slug tests were conducted at six boreholes to estimate transmissivity. Transmissivity from slug tests ranged from 21 feet squared per day in borehole CH-5669 to greater than 12,000 feet squared per day in boreholes CH-5665 and CH-5667. After interpretation of geophysical logs, borehole television surveys, and driller's logs, all boreholes were screened such that water-level fluctuations could be monitored and discrete water samples collected from one or more water-producing zones in each borehole.

  9. Identification of potential water-bearing zones by the use of borehole geophysics in the vicinity of Keystone Sanitation Superfund Site, Adams County, Pennsylvania and Carroll County, Maryland

    Science.gov (United States)

    Conger, Randall W.

    1997-01-01

    Between April 23, 1996, and June 21, 1996, the U.S. Environmental Protection Agency contracted Haliburton-NUS, Inc., to drill four clusters of three monitoring wells near the Keystone Sanitation Superfund Site. The purpose of the wells is to allow monitoring and sampling of shallow, intermediate, and deep waterbearing zones for the purpose of determining the horizontal and vertical distribution of any contaminated ground water migrating from the Keystone Site. Twelve monitoring wells, ranging in depth from 50 to 397.9 feet below land surface, were drilled in the vicinity of the Keystone Site. The U.S. Geological Survey conducted borehole-geophysical logging and determined, with geophysical logs and other available data, the ideal intervals to be screened in each well. Geophysical logs were run on four intermediate and four deep wells, and a caliper log only was run on shallow well CL-AD-173 (HN-1S). Interpretation of geophysical logs and existing data determined the placement of screens within each borehole.

  10. Evaluation of geophysical logs and video surveys in boreholes adjacent to the Berkley Products Superfund Site, West Cocalico Township, Lancaster County, Pennsylvania

    Science.gov (United States)

    Low, Dennis J.; Conger, Randall W.

    1998-01-01

    Between February 1998 and April 1998, geophysical logs were collected in nine boreholes adjacent to the Berkley Products Superfund Site, West Cocalico Township, Lancaster County, Pa. Video surveys were conducted on four of the nine boreholes. The boreholes range in depth from 320 to 508 feet below land surface, are completed open holes, have ambient vertical flow of water, and penetrate a series of interbedded siltstone, sandstone, and conglomerate units. The purpose of collecting geophysical-log data was to help determine horizontal and vertical distribution of contaminated ground water migrating from known or suspected sources and to aid in the placement of permanent borehole packers. The primary contaminants were derived from paint waste that included pigment sludges and wash solvents. The chlorinated volatile organic compounds probably originated from the wash solvents. Caliper logs and video surveys were used to locate fractures; inflections on fluid-resistivity and fluid-temperature logs were used to locate possible water-bearing fractures. Heatpulse-flowmeter measurements were used to verify the locations of water-producing or water-receiving zones and to measure rates of flow between water-bearing fractures. Single-point-resistance and natural-gamma logs provided information on stratigraphy. After interpretation of geophysical logs, video surveys, and driller's logs, permanent multiple-packer systems were installed in each borehole to obtain depth specific water samples from one or more water-bearing fractures in each borehole.

  11. PCBs and DDE in tree swallow (Tachycineta bicolor) eggs and nestlings from an estuarine PCB superfund site, New Bedford Harbor, MA, U.S.A.

    Science.gov (United States)

    Jayaraman, Saro; Nacci, Diane E.; Champlin, Denise M.; Pruell, Richard J.; Rocha, Kenneth J.; Custer, Christine M.; Custer, Thomas W.; Cantwell, Mark

    2009-01-01

    While breeding tree swallows (Tachycineta bicolor) have been used as biomonitors for freshwater sites, we report the first use of this species to assess contaminant bioaccumulation from estuarine breeding grounds into these aerial insectivores. Eggs and nestlings were collected from nest boxes in a polychlorinated biphenyl (PCB) contaminated estuary, the New Bedford Harbor Superfund site (NBH, Massachusetts, USA), and a reference salt marsh, Fox Hill (FH, Jamestown, Rhode Island, USA). Sediments, eggs, and nestlings were compared on a ng g−1 wet weight basis for total PCBs and DDE (1,1-bis-(4-chlorophenyl)-2,2-dichloroethene), metabolite of DDT (1,1,1-trichloro-2,2-bis-(p-chlorophenyl)ethane). NBH samples contained high concentrations of PCBs compared to FH for sediment (36,500 and 0.2), eggs (11,200 and 323), and nestlings (16,800 and 26). PCB homologue patterns linked tree swallow contamination to NBH sediment. NBH samples were also contaminated with DDE compared to FH for sediment (207 and 0.9) and nestlings (235 and 30) but not for eggs (526 and 488), suggesting both NBH and nonbreeding ground sources for DDE. The relationships between sediment and tree swallow egg and nestling PCBs were similar to those reported for freshwater sites. Like some highly contaminated freshwater sites, NBH PCB bioaccumulation had little apparent effect on reproductive success.

  12. Time series geophysical monitoring of permanganate injections and in situ chemical oxidation of PCE, OU1 area, Savage Superfund Site, Milford, NH, USA.

    Science.gov (United States)

    Harte, Philip T; Smith, Thor E; Williams, John H; Degnan, James R

    2012-05-01

    In situ chemical oxidation (ISCO) treatment with sodium permanganate, an electrically conductive oxidant, provides a strong electrical signal for tracking of injectate transport using time series geophysical surveys including direct current (DC) resistivity and electromagnetic (EM) methods. Effective remediation is dependent upon placing the oxidant in close contact with the contaminated aquifer. Therefore, monitoring tools that provide enhanced tracking capability of the injectate offer considerable benefit to guide subsequent ISCO injections. Time-series geophysical surveys were performed at a superfund site in New Hampshire, USA over a one-year period to identify temporal changes in the bulk electrical conductivity of a tetrachloroethylene (PCE; also called tetrachloroethene) contaminated, glacially deposited aquifer due to the injection of sodium permanganate. The ISCO treatment involved a series of pulse injections of sodium permanganate from multiple injection wells within a contained area of the aquifer. After the initial injection, the permanganate was allowed to disperse under ambient groundwater velocities. Time series geophysical surveys identified the downward sinking and pooling of the sodium permanganate atop of the underlying till or bedrock surface caused by density-driven flow, and the limited horizontal spread of the sodium permanganate in the shallow parts of the aquifer during this injection period. When coupled with conventional monitoring, the surveys allowed for an assessment of ISCO treatment effectiveness in targeting the PCE plume and helped target areas for subsequent treatment.

  13. Occurrences and fate of DDT principal isomers/metabolites, DDA, and o,p'-DDD enantiomers in fish, sediment and water at a DDT-impacted Superfund site.

    Science.gov (United States)

    Garrison, A W; Cyterski, M; Roberts, K D; Burdette, D; Williamson, J; Avants, J K

    2014-11-01

    In the 1950s and 60s, discharges from a DDT manufacturing plant contaminated a tributary system of the Tennessee River near Huntsville, Alabama, USA. Regulatory action resulted in declaring the area a Superfund site which required remediation and extensive monitoring. Monitoring data collected from 1988, after remediation, through 2011 showed annual decreases approximating first-order decay in concentrations of total DDT and its six principal congeners (p,p'-DDT, o,p'-DDT, p,p'-DDD, o,p'-DDD, p,p'-DDE and o,p'-DDE) in filets from three species of fish. As of 2013, these concentrations met the regulatory requirements of 5 mg/kg or less total DDT for each fish tested. The enantiomer fractions (EF) of chiral o,p'-DDD in smallmouth buffalo and channel catfish were always below 0.5, indicating preferential decay of the (+)-enantiomer of this congener; this EF did not change significantly over 15 years. The often-neglected DDT metabolite p,p'-DDA was found at a concentration of about 20 μg/l in the ecosystem water.

  14. Geophysical Logs, Specific Capacity, and Water Quality of Four Wells at Rogers Mechanical (former Tate Andale) Property, North Penn Area 6 Superfund Site, Lansdale, Pennsylvania, 2006-07

    Science.gov (United States)

    Senior, Lisa A.; Bird, Philip H.

    2010-01-01

    As part of technical assistance to the U.S. Environmental Protection Agency (USEPA) in the remediation of properties on the North Penn Area 6 Superfund Site in Lansdale, Pa., the U.S. Geological Survey (USGS) in 2006-07 collected data in four monitor wells at the Rogers Mechanical (former Tate Andale) property. During this period, USGS collected and analyzed borehole geophysical and video logs of three new monitor wells (Rogers 4, Rogers 5, and Rogers 6) ranging in depth from 80 to 180 feet, a borehole video log and additional heatpulse-flowmeter measurements (to quantify vertical borehole flow) in one existing 100-foot deep well (Rogers 3S), and water-level data during development of two wells (Rogers 5 and Rogers 6) to determine specific capacity. USGS also summarized results of passive-diffusion bag sampling for volatile organic compounds (VOCs) in the four wells. These data were intended to help understand the groundwater system and the distribution of VOC contaminants in groundwater at the property.

  15. POST-REMEDIATION BIOMONITORING OF PESTICIDES AND OTHER CONTAMINANTS IN MARINE WATERS AND SEDIMENT NEAR THE UNITED HECKATHORN SUPERFUND SITE, RICHMOND, CALIFORNIA

    Energy Technology Data Exchange (ETDEWEB)

    Antrim, Liam D.; Kohn, Nancy P.

    2000-09-06

    Marine sediment remediation at the United Heckathorn Superfund Site was completed in April 1997. Water and mussel tissues were sampled in February 1999 from four stations near Lauritzen Canal in Richmond, California, for Year 2 of post-remediation monitoring of marine areas near the United Heckathorn Site. Dieldrin and dichlorodiphenyl trichloroethane (DDT) were analyzed in water samples, tissue samples from resident mussels, and tissue samples from transplanted mussels deployed for 4 months. Mussel tissues were also analyzed for polychlorinated biphenyls (PCB), which were detected in sediment samples. Chlorinated pesticide concentrations in water samples were similar to preremediation levels and did not meet remediation goals. Biomonitoring results indicated that the bioavailability of chlorinated pesticides has been reduced from preremediation levels both in the dredged area and throughout Richmond Harbor. Total DDT and dieldrin concentrations in mussel tissues were lower than measured levels from preremediation surveys and also lower than Year 1 levels from post-remediation biomonitoring. Sediment analyses showed the presence of elevated DDT, dieldrin, PCB aroclor 1254, and very high levels of polynuclear aromatic hydrocarbons (PAH) in Lauritzen Channel.

  16. Time series geophysical monitoring of permanganate injections and in situ chemical oxidation of PCE, OU1 area, Savage Superfund Site, Milford, NH, USA

    Science.gov (United States)

    Harte, Philip T.; Smith, Thor E.; Williams, John H.; Degnan, James R.

    2012-05-01

    In situ chemical oxidation (ISCO) treatment with sodium permanganate, an electrically conductive oxidant, provides a strong electrical signal for tracking of injectate transport using time series geophysical surveys including direct current (DC) resistivity and electromagnetic (EM) methods. Effective remediation is dependent upon placing the oxidant in close contact with the contaminated aquifer. Therefore, monitoring tools that provide enhanced tracking capability of the injectate offer considerable benefit to guide subsequent ISCO injections. Time-series geophysical surveys were performed at a superfund site in New Hampshire, USA over a one-year period to identify temporal changes in the bulk electrical conductivity of a tetrachloroethylene (PCE; also called tetrachloroethene) contaminated, glacially deposited aquifer due to the injection of sodium permanganate. The ISCO treatment involved a series of pulse injections of sodium permanganate from multiple injection wells within a contained area of the aquifer. After the initial injection, the permanganate was allowed to disperse under ambient groundwater velocities. Time series geophysical surveys identified the downward sinking and pooling of the sodium permanganate atop of the underlying till or bedrock surface caused by density-driven flow, and the limited horizontal spread of the sodium permanganate in the shallow parts of the aquifer during this injection period. When coupled with conventional monitoring, the surveys allowed for an assessment of ISCO treatment effectiveness in targeting the PCE plume and helped target areas for subsequent treatment.

  17. 76 FR 57702 - National Priorities List, Proposed Rule No. 55

    Science.gov (United States)

    2011-09-16

    ... Well Corozal, PR EPA-HQ-SFUND-2011-0652 US Oil Recovery Pasadena, TX......... EPA-HQ-SFUND-2011-0653...-1417. Ildefonso Acosta, Region 2 (NJ, NY, PR, VI), U.S. EPA, 290 Broadway, New York, NY 10007-1866; 212... today's proposed rule, EPA is proposing to add 11 sites to the General Superfund section of the NPL....

  18. Post-remediation biomonitoring of pesticides and other contaminants in marine waters and sediment near the United Heckathorn Superfund Site, Richmond, California

    Energy Technology Data Exchange (ETDEWEB)

    LD Antrim; NP Kohn

    2000-05-26

    Marine sediment remediation at the United Heckathorn Superfund Site was completed in April 1997. Water and mussel tissues were sampled in February 1999 from four stations near Lauritzen Canal in Richmond, California, for Year 2 of post-remediation monitoring of marine areas near the United Heckathorn Site. Dieldrin and dichlorodiphenyl trichloroethane (DDT) were analyzed in water samples, tissue samples from resident mussels, and tissue samples from transplanted mussels deployed for 4 months. Concentrations of dieldrin and total DDT in water and total DDT in tissue were compared with Year 1 of post-remediation monitoring, and with preremediation data from the California State Mussel Watch program (tissues) and the Ecological Risk Assessment for the United Heckathorn Superfund Site (tissues and water). Mussel tissues were also analyzed for polychlorinated biphenyls (PCB), which were detected in sediment samples. Chlorinated pesticide concentrations in water samples were similar to preremediation levels and did not meet remediation goals. Mean dieidrin concentrations in water ranged from 0.62 rig/L to 12.5 ng/L and were higher than the remediation goal (0.14 ng/L) at all stations. Mean total DDT concentrations in water ranged from 14.4 ng/L to 62.3 ng/L and exceeded the remediation goal (0.59 ng/L) at all stations. The highest concentrations of both pesticides were found at the Lauritzen Canal/End station. Despite exceedence of the remediation goals, chlorinated pesticide concentrations in Lauritzen Canal water samples were notably lower in 1999 than in 1998. Tissue samples from biomonitoring organisms (mussels) provide an indication of the longer-term integrated exposure to contaminants in the water column, which overcomes the limitations of grab samples of water. Biomonitoring results indicated that the bioavailability of chlorinated pesticides has been reduced from preremediation levels both in the dredged area and throughout Richmond Harbor. Total DDT and

  19. Transcriptomic assessment of resistance to effects of an aryl hydrocarbon receptor (AHR agonist in embryos of Atlantic killifish (Fundulus heteroclitus from a marine Superfund site

    Directory of Open Access Journals (Sweden)

    Franks Diana G

    2011-05-01

    Full Text Available Abstract Background Populations of Atlantic killifish (Fundulus heteroclitus have evolved resistance to the embryotoxic effects of polychlorinated biphenyls (PCBs and other halogenated and nonhalogenated aromatic hydrocarbons that act through an aryl hydrocarbon receptor (AHR-dependent signaling pathway. The resistance is accompanied by reduced sensitivity to induction of cytochrome P450 1A (CYP1A, a widely used biomarker of aromatic hydrocarbon exposure and effect, but whether the reduced sensitivity is specific to CYP1A or reflects a genome-wide reduction in responsiveness to all AHR-mediated changes in gene expression is unknown. We compared gene expression profiles and the response to 3,3',4,4',5-pentachlorobiphenyl (PCB-126 exposure in embryos (5 and 10 dpf and larvae (15 dpf from F. heteroclitus populations inhabiting the New Bedford Harbor, Massachusetts (NBH Superfund site (PCB-resistant and a reference site, Scorton Creek, Massachusetts (SC; PCB-sensitive. Results Analysis using a 7,000-gene cDNA array revealed striking differences in responsiveness to PCB-126 between the populations; the differences occur at all three stages examined. There was a sizeable set of PCB-responsive genes in the sensitive SC population, a much smaller set of PCB-responsive genes in NBH fish, and few similarities in PCB-responsive genes between the two populations. Most of the array results were confirmed, and additional PCB-regulated genes identified, by RNA-Seq (deep pyrosequencing. Conclusions The results suggest that NBH fish possess a gene regulatory defect that is not specific to one target gene such as CYP1A but rather lies in a regulatory pathway that controls the transcriptional response of multiple genes to PCB exposure. The results are consistent with genome-wide disruption of AHR-dependent signaling in NBH fish.

  20. Microbial Diversity and Metal Speciation Changes in Mine Tailings Following Compost-Assisted Direct Planting: A Four-Year Superfund Site Field Study

    Science.gov (United States)

    Maier, R. M.; Gil-Loaiza, J.; Honeker, L. K.; Hottenstein, J. D.; Valentin-Vargas, A.; Jennings, L. L.; Hammond, C.; Neilson, J. W.; Root, R. A.; Chorover, J.

    2015-12-01

    EPA estimates that future mine tailings remediation costs will exceed US $50 billion using present technologies based on constructing an inert or biological cap on the tailings. Both approaches require large amounts of capping materials that can be difficult and expensive to obtain especially for sites several thousand hectares in size. An alternative technology is direct planting into tailings. However, direct planting alone is not feasible for many legacy sites due to extreme acidity and high metal content which prevent plant germination and growth. Therefore the process must be "assisted" through the addition of amendments such as compost. Here we present results from the first four years of a field study at the Iron King Mine and Humboldt Smelter Superfund site demonstrating the feasibility of compost-assisted direct planting. Parameters measured during the field study included: canopy cover, pH, nutrient content, plant metal uptake, metal(loid) speciation, mineral analysis, microbiome analysis, and plant root-metal-microbe interactions. Integrated analysis of these parameters suggests that even in this "worst-case scenario" mine tailings site (pH 2.5; As and Pb each exceeding 2 g kg-1), we have created a sustainable system. In this system, phyto-catalyzed stabilization of inorganic contaminants in the root zone is driven by plant root exudates and the associated rhizosphere microbial community. The results of this research will be put into context of a larger topic- that of ecological engineering of mine tailings sites - a technique being proposed to prevent creation of acidic conditions and metal(loid) mobilization in the first place.

  1. Construction and Characterization of Mini-ruthenium-Carbon Eutectic Cells for Industrial Use

    Science.gov (United States)

    Diril, A.; Bourson, F.; Parga, C.; Sadli, M.

    2015-12-01

    High-temperature eutectic fixed points have proved to be convenient tools for temperature scale dissemination and thermometer calibrations/checks at temperatures above 1100°C. In order to investigate the feasibility of metal-carbon eutectic cells in industrial applications as a means for assessing the traceability of non-contact thermometers, a batch of cells was constructed at LNE-Cnam, NPL, and TUBITAK UME. Compared to the usual dimensions of high-temperature fixed point cells (45 mm in length × 24 mm in diameter), a new cell design was created to fit with industrial applications. TUBITAK UME constructed and characterized five ruthenium-carbon (Ru-C) eutectic cells of dimensions 24 mm in length × 24 mm in diameter. One of these cells has been selected and characterized at CEA premises. Ru-C eutectic cells have been evaluated in terms of short-term repeatability, reproducibility, furnace effect, sharp temperature ramps, and the effect of cell location. Measurements at TÜBİTAK UME have been performed with a transfer standard pyrometer calibrated at the copper point and a BB3500pg high-temperature blackbody furnace was used for construction and measurement. For the measurements at CEA, a Land Standard—HIMERT S1 radiation thermometer and a VITI induction furnace were used. In this article results of the measurements at TÜBİTAK UME and CEA will be presented. The possible use of these mini-eutectic cells as industrial temperature standards will be discussed.

  2. Chemical and biological methods for the analysis and remediation of environmental contaminants frequently identified at superfund sites

    Energy Technology Data Exchange (ETDEWEB)

    Melinda Christine Wiles [Texas A& amp; M University, College Station, TX (United States). Department of Veterinary Anatomy & Public Health

    2004-08-15

    Substantial environmental contamination has occurred from coal tar creosote and pentachlorophenol (C5P) in wood preserving solutions. The present studies focused on the characterization and remediation of these contaminants. The first objective was to delineate a sequence of biological changes caused by chlorinated phenol (CP) exposure. The second study was to develop multi-functional sorbents to remediate CPs and other components of wood preserving waste from groundwater. Following water remediation, the final aim of this work was to explore the safety of the parent clay minerals as potential enterosorbents for contaminants ingested in water and food. Based on evaluations of toxicity and neutron activation analysis of tissues, no significant differences were observed between animals receiving clay supplements and control animals, with the exception of slightly decreased brain Rb in animals ingesting clay. Overall, the results suggest that neither clay mineral, at relatively high dietary concentrations, influences mineral uptake or utilization in the pregnant rat. 420 refs., 28 figs, 15 tabs.

  3. Characterization of mercury contamination in the Androscoggin River, Coos County, New Hampshire

    Science.gov (United States)

    Chalmers, Ann; Marvin-DiPasquale, Mark C.; Degnan, James R.; Coles, James; Agee, Jennifer L.; Luce, Darryl

    2013-01-01

    The former chloralkali facility in Berlin, New Hampshire, was designated a Superfund site in 2005. Historic paper mill activities resulted in the contamination of groundwater, surface water, and sediments with many organic compounds and mercury (Hg). Hg continues to seep into the Androscoggin River in elemental form through bedrock fractures. The objective of this study was to spatially characterize (1) the extent of Hg contamination in water, sediment, and biota; (2) Hg speciation and methylmercury (MeHg) production potential rates in sediment; (3) the availability of inorganic divalent Hg (Hg(II)) for Hg(II)-methylation (MeHg production); and (4) ancillary sediment geochemistry necessary to better understand Hg speciation and MeHg production potential rates in this system.

  4. Evaluation of geophysical logs and aquifer-isolation tests, Phase III, August 2002 to March 2004, Crossley Farm superfund site, Hereford township, Berks County, Pennsylvania

    Science.gov (United States)

    Conger, Randall W.; Low, Dennis J.

    2006-01-01

    Between August 2002 and March 2004, geophysical logging was conducted in 23 boreholes at the Crossley Farm Superfund Site, Hereford Township, Berks County, Pa., to determine the water-producing zones, water-receiving zones, zones of vertical-borehole flow, and fracture orientation where applicable. The boreholes ranged in depth from 71 to 503 ft(feet) below land surface. The geophysical logging determined the placement of well screens and packers, which allow monitoring and sampling of water-bearing zones in the fractured bedrock so the horizontal and vertical distribution of contaminated ground water migrating from known sources could be determined. Geophysical logging included collection of caliper (22 boreholes), fluid-temperature (17 boreholes),single-point-resistance (17 boreholes), natural-gamma (17 boreholes), fluid-flow (18 boreholes), and acoustic-televiewer (13 boreholes) logs. Caliper and acoustic-televiewer logs were used to locate fractures, joints, and weathered zones. Inflections on fluid-temperature and single-point-resistance logs indicated possible water-bearing zones, and flowmeter measurements verified these locations. Single-point-resistance, natural-gamma, and geologist logs provided information on stratigraphy; the geologist log also provided information on the location of possible water-producing zones. Borehole geophysical logging and heatpulse flowmetering indicated active flow in 10 boreholes. Seven of the boreholes are in ground-water discharge areas and three boreholes are in ground-water recharge areas. Heatpulse flowmetering, in conjunction with the geologist logs, indicates lithologic contacts (changes in lithology from a gneiss dominated by quartz-plagioclase-feldspar mineralogy to a gneiss dominated by hornblende mineralogy) are typically fractured, permeable, and effective transmitters of water. Single-well, aquifer-isolation (packer) tests were performed on two boreholes. Packers were set at depths ranging from 210 to 465 ft

  5. Geochemical, isotopic, and dissolved gas characteristics of groundwater in a fractured crystalline-rock aquifer, Savage Municipal Well Superfund site, Milford, New Hampshire, 2011

    Science.gov (United States)

    Harte, Philip T.

    2013-01-01

    Tetrachloroethylene (PCE), a volatile organic compound, was detected in groundwater from deep (more than (>) 300 feet (ft) below land surface) fractures in monitoring wells tapping a crystalline-rock aquifer beneath operable unit 1 (OU1) of the Savage Municipal Well Superfund site (Weston, Inc., 2010). Operable units define remedial areas of contaminant concern. PCE contamination within the fractured-rock aquifer has been designated as a separate operable unit, operable unit 3 (OU3; Weston, Inc., 2010). PCE contamination was previously detected in the overlying glacial sand and gravel deposits and basal till, hereafter termed the Milford-Souhegan glacial-drift (MSGD) aquifer (Harte, 2004, 2006). Operable units 1 and 2 encompass areas within the MSGD aquifer, whereas the extent of the underlying OU3 has yet to be defined. The primary original source of contamination has been identified as a former manufacturing facility—the OK Tool manufacturing facility; hence OU1 sometimes has been referred to as the OK Tool Source Area (New Hampshire Department of Environmental Services, undated). A residential neighborhood of 30 to 40 houses is located in close proximity (one-quarter of a mile) from the PCE-contaminated monitoring wells. Each house has its own water-supply well installed in similar rocks as those of the monitoring wells, as indicated by the New Hampshire State geologic map (Lyons and others, 1997). An investigation was initiated in 2010 by the U.S. Environmental Protection Agency (USEPA) region 1, and the New Hampshire Department of Environmental Services (NHDES) to assess the potential for PCE transport from known contaminant locations (monitoring wells) to the residential wells. The U.S. Geological Survey (USGS) and the NHDES entered into a cooperative agreement in 2011 to assist in the evaluation of PCE transport in the fractured-rock aquifer. Periodic sampling over the last decade by the USEPA and NHDES has yet to detect PCE in groundwater from the

  6. Temporal Chemical Data for Sediment, Water, and Biological Samples from the Lava Cap Mine Superfund Site, Nevada County, California-2006-2008

    Science.gov (United States)

    Foster, Andrea L.; Ona-Nguema, Georges; Tufano, Kate; White, Richard III

    2010-01-01

    the possibility of future movement of tailings, and began an assessment of the risks posed by physical and chemical hazards at the site. The EPA's assessment identified arsenic (As) as the primary hazard of concern. Three main exposure routes were identified: inhalation/ingestion of mine tailings, dermal absorption/ingestion of As in lake water from swimming, and ingestion of As-contaminated ground water or surface water. Lost Lake is a private lake which is completely surrounded by low-density residential development. Prior to the dam failure, the lake was used by the local residents for swimming and boating. An estimated 1,776 people reside within one mile of the lake, and almost all residents of the area use potable groundwater for domestic use. Risk factors for human exposure to As derived from mine wastes were high enough to merit placement of the mine site and surrounding area on the National Priority List (commonly called ?Superfund?). The Lava Cap Mine Superfund site (LCMS) encompasses approximately 33 acres that include the mine site, the stretch of Little Clipper Creek between the mine and Lost Lake, the lake itself, and the area between the lake and the confluence of Little Clipper Creek with its parent stream, Clipper Creek. The area between the two creeks is named the ?deposition area? due to the estimated 24 m thick layer of tailings that were laid down there during and after active mining. The lobate structure of Lost Lake is also due to deposition in this area. The deposition area and Lost Lake are together estimated to contain 382,277 m3 of tailings. The primary goals of the EPA have been to minimize tailings movement downstream of Lost Lake and to ensure that residents in the area have drinking water that meets national water quality standards. EPA has officially decided to construct a public water supply line to deliver safe water to affected residences, since some residential wells in the area have As concentrations above the curr

  7. Changes in Groundwater Flow and Volatile Organic Compound Concentrations at the Fischer and Porter Superfund Site, Warminster Township, Bucks County, Pennsylvania, 1993-2009

    Science.gov (United States)

    Sloto, Ronald A.

    2010-01-01

    The 38-acre Fischer and Porter Company Superfund Site is in Warminster Township, Bucks County, Pa. Historically, as part of the manufacturing process, trichloroethylene (TCE) degreasers were used for parts cleaning. In 1979, the Bucks County Health Department detected TCE and other volatile organic compounds (VOCs) in water from the Fischer and Porter on-site supply wells and nearby public-supply wells. The Fischer and Porter Site was designated as a Superfund Site and placed on the National Priorities List in September 1983. A 1984 Record of Decision for the site required the Fischer and Porter Company to pump and treat groundwater contaminated by VOCs from three on-site wells at a combined rate of 75 gallons per minute to contain groundwater contamination on the property. Additionally, the Record of Decision recognized the need for treatment of the water from two nearby privately owned supply wells operated by the Warminster Heights Home Ownership Association. In 2004, the Warminster Heights Home Ownership Association sold its water distribution system, and both wells were taken out of service. The report describes changes in groundwater levels and contaminant concentrations and migration caused by the shutdown of the Warminster Heights supply wells and presents a delineation of the off-site groundwater-contamination plume. The U.S. Geological Survey (USGS) conducted this study (2006-09) in cooperation with the U.S. Environmental Protection Agency (USEPA). The Fischer and Porter Site and surrounding area are underlain by sedimentary rocks of the Stockton Formation of Late Triassic age. The rocks are chiefly interbedded arkosic sandstone and siltstone. The Stockton aquifer system is comprised of a series of gently dipping lithologic units with different hydraulic properties. A three-dimensional lithostratigraphic model was developed for the site on the basis of rock cores and borehole geophysical logs. The model was simplified by combining individual lithologic

  8. EPA Facility Registry Service (FRS): CERCLIS_NPL

    Data.gov (United States)

    U.S. Environmental Protection Agency — This web feature service contains location and facility identification information from EPA's Facility Registry Service (FRS) for the subset of facilities that are...

  9. Technology evaluation report: SITE (Superfund Innovative Technology Evaluation) program demonstration test. The American Combustion Pyretron Thermal Destruction System at the US EPA's (Environmental Protection Agency's) combustion research facility

    Energy Technology Data Exchange (ETDEWEB)

    Waterland, L.; Lee, J.W.

    1989-04-01

    A series of demonstration tests of the American Combustion, Inc., Thermal Destruction System was performed under the SITE program. This oxygen-enhanced combustion system was retrofit to the rotary-kiln incinerator at EPA's Combustion Research Facility. The system's performance was tested firing contaminated soil from the Stringfellow Superfund Site, both alone and mixed with a coal tar waste (KO87). Comparative performance with conventional incinerator operation was also tested. Compliance with the incinerator performance standards of 99.99% principal organic hazardous constituents (POHC) destruction and removal efficiency and particulate emissions of less than 180 mg/dscm at 7% O2 was measured for all tests. The Pyretron system was capable of in-compliance performance at double the mixed waste feedrate and at a 60% increase in batch waste charge mass than possible with conventional incineration. Scrubber blowdown and kiln ash contained no detectable levels of any of the POHCs chosen.

  10. Evaluation of modeling for groundwater flow and tetrachloroethylene transport in the Milford-Souhegan glacial-drift aquifer at the Savage Municipal Well Superfund site, Milford, New Hampshire, 2011

    Science.gov (United States)

    Harte, Philip T.

    2012-01-01

    The U.S. Geological Survey and the New Hampshire Department of Environmental Services entered into a cooperative agreement to assist in the evaluation of remedy simulations of the MSGD aquifer that are being performed by various parties to track the remedial progress of the PCE plume. This report summarizes findings from this evaluation. Topics covered include description of groundwater flow and transport models used in the study of the Savage Superfund site (section 2), evaluation of models and their results (section 3), testing of several new simulations (section 4), an assessment of the representation of models to simulate field conditions (section 5), and an assessment of models as a tool in remedial operational decision making (section 6).

  11. Threatened and endangered wildlife species of the Hanford Site related to CERCLA characterization activities

    Energy Technology Data Exchange (ETDEWEB)

    Fitzner, R.E. [Pacific Northwest Lab., Richland, WA (United States); Weiss, S.G.; Stegen, J.A. [Westinghouse Hanford Co., Richland, WA (United States)

    1994-06-01

    The US Department of Energy`s (DOE) Hanford Site has been placed on the National Priorities List, which requires that it be remediated under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) or Superfund. Potentially contaminated areas of the Hanford Site were grouped into operable units, and detailed characterization and investigation plans were formulated. The DOE Richland Operations Office requested Westinghouse Hanford Company (WHC) to conduct a biological assessment of the potential impact of these characterization activities on the threatened, endangered, and sensitive wildlife species of the Hanford Site. Additional direction for WHC compliances with wildlife protection can be found in the Environmental Compliance Manual. This document is intended to meet these requirements, in part, for the CERCLA characterization activities, as well as for other work comparable in scope. This report documents the biological assessment and describes the pertinent components of the Hanford Site as well as the planned characterization activities. Also provided are accounts of endangered, threatened, and federal candidate wildlife species on the Hanford Site and information as to how human disturbances can affect these species. Potential effects of the characterization activities are described with recommendations for mitigation measures.

  12. Geohydrology and vertical distribution of volatile organic compounds in ground water, Fischer and Porter Company Superfund Site, Warminster, Bucks County, Pennsylvania

    Science.gov (United States)

    Sloto, R.A.; Macchiaroli, Paola; Conger, R.W.

    1995-01-01

    The Fischer and Porter company Superfund Site is underlain by sedimentary rocks of the Upper Triassic Stockton Formation, which consists of interbedded siltstone, very-fine grained to coarse-grained sandstone, and conglomerate in crudely defined upward fining cycles. These rocks form a complex, heterogeneous, leaky, multiaquifer system comprised of a series of gently dipping lithologic units with different hydraulic properties. Ground water is unconfined in the shallower part of the aquifer and confined or semiconfined in the deeper part of the aquifer. Water levels measured in monitor well clusters and borehole-flow measurements made in open boreholes show a downward hydraulic head gradient at the site, caused in part by the pumping of nearby, deep public-supply wells and the Fischer and Porter treatment system extraction wells. Downward borehole flow was measured at rates up to 9 gallons per minute. Aquifer-isolation tests were run in the six boreholes to obtain depth-discrete specific-capacity and water-quality data. On the basis of specific-capacity data for 27 isolated intervals, specific capacity is not related to depth. Water levels in monitor wells at the Fischer and Porter Site are greatly affected by the pumping of nearby public-supply wells, as well as the pumping of the Fischer and Porter treatment system extraction wells. Pumping of the public-supply wells causes daily water-level fluctuations in wells at the site as great as 5.3 feet. The shutdown of the Fischer and Porter treatment system extraction wells caused a rise in water level in all wells screened in the intermediate and deep zones. The rise in water level was as great as 4.3 feet in the intermediate zone and as great as 5.9 feet in the deep zone. The direction of ground-water flow is toward the north in the shallow and intermediate zones and toward the west and west-southwest in the deep zone. Ground-water discharge probably is to the unnamed tributary to Pennypack Creek north and west of

  13. Geophysical Logs, Aquifer Tests, and Water Levels in Wells in and Near the North Penn Area 7 Superfund Site, Upper Gwynedd Township, Montgomery County, Pennsylvania, 2002-2006

    Science.gov (United States)

    Senior, Lisa A.; Conger, Randall W.; Bird, Philip H.

    2008-01-01

    Ground water in the vicinity of several industrial facilities in Upper Gwynedd Township and Lansdale Borough, Montgomery County, Pa., is contaminated with several volatile organic compounds (VOCs). The 2-square-mile area was placed on the National Priorities List as the North Penn Area 7 Superfund Site by the U.S. Environmental Protection Agency (USEPA) in 1989. The U.S. Geological Survey (USGS) conducted geophysical logging, aquifer testing, water-level monitoring, and streamflow measurements in the vicinity of North Penn Area 7 from October 2002 through December 2006. This followed work that began in 2000 to assist the USEPA in developing an understanding of the hydrogeologic framework in the area as part of the USEPA Remedial Investigation. The study area is underlain by Triassic- and Jurassic-age sandstones, siltstones, and shales of the Lockatong Formation and the Brunswick Group. Regionally, these rocks strike northeast and dip to the northwest. The sequence of rocks form fractured-rock aquifers that act as a set of confined to semi-confined layered aquifers of differing permeabilities. The aquifers are recharged by precipitation and discharge to streams and wells. The Wissahickon Creek headwaters are less than 1 mile northeast of the study area. This stream flows southwest approximately parallel to strike and bisects North Penn Area 7. Ground water is pumped in the vicinity of North Penn Area 7 for industrial use and public supply. The USGS collected geophysical logs for 42 wells that ranged in depth from 40 to 477 ft. Aquifer-interval-isolation testing was done in 17 of the 42 wells, for a total of 122 zones tested. A multiple-well aquifer test was conducted by monitoring the response of 14 wells to pumping and shutdown of a 600-ft deep production well in November-December 2004. In addition, water levels were monitored continuously in four wells in the area from October 2002 through September 2006, and streamflow was measured quarterly at two sites on

  14. Hydrostratigraphic mapping of the Milford-Souhegan glacial drift aquifer, and effects of hydrostratigraphy on transport of PCE, Operable Unit 1, Savage Superfund Site, Milford, New Hampshire

    Science.gov (United States)

    Harte, Philip T.

    2010-01-01

    The Savage Municipal Well Superfund site in the Town of Milford, New Hampshire, was underlain by a 0.5-square mile plume (as mapped in 1994) of volatile organic compounds (VOCs), most of which consisted of tetrachloroethylene (PCE). The plume occurs mostly within highly transmissive stratified-drift deposits but also extends into underlying till and bedrock. The plume has been divided into two areas called Operable Unit 1 (OU1), which contains the primary source area, and Operable Unit 2 (OU2), which is defined as the extended plume area outside of OU1. The OU1 remedial system includes a low-permeability barrier wall that encircles the highest detected concentrations of PCE and a series of injection and extraction wells to contain and remove contaminants. The barrier wall likely penetrates the full thickness of the sand and gravel; in many places, it also penetrates the full thickness of the underlying basal till and sits atop bedrock.From 1998 to 2004, PCE concentrations decreased by an average of 80 percent at most wells outside the barrier wall. However, inside the barrier, PCE concentrations greater than 10,000 micrograms per liter (μg/L) still exist (2008). The remediation of these areas of recalcitrant PCE presents challenges to successful remediation.The U.S. Geological Survey (USGS), in cooperation with the New Hampshire Department of Environmental Services (NHDES) and the U.S. Environmental Protection Agency (USEPA), Region 1, is studying the solute transport of VOCs (primarily PCE) in contaminated groundwater in the unconsolidated sediments (overburden) of the Savage site and specifically assisting in the evaluation of the effectiveness of remedial operations in the OU1 area. As part of this effort, the USGS analyzed the subsurface stratigraphy to help understand hydrostratigraphic controls on remediation.A combination of lithologic, borehole natural gamma-ray and electromagnetic (EM) induction logging, and test drilling has identified 11 primary

  15. INDUST.SUPERFUND_POLY_09

    Data.gov (United States)

    U.S. Environmental Protection Agency — This polygon layer represents a current (as of April 2009) list of CERCLIS' sites in EPA Region 7. Some of the sites are expanded to include plumes and others not.

  16. Characterization of As (V), As (III) by selective reduction/adsorption on palladium nanoparticles in environmental water samples.

    Science.gov (United States)

    Sounderajan, Suvarna; Kumar, G Kiran; Kumar, Sanjukta A; Udas, A C; Venkateswaran, G

    2009-05-15

    Hydrazine (HZ) and sodium borohydride (BH) are commonly used reagents for the production of palladium nanoparticles (PdNP) in aqueous solution and also for the reduction of arsenic from higher oxidation state to lower oxidation state. A methodology based on the quantitative adsorption of reduced arsenic species on PdNP generated in situ by BH and HZ is described to characterize As (V) and As (III) in environmental water samples. It was observed that PdNP obtained by BH gave quantitative recovery of As (V) and (III) and the PdNP obtained by HZ could account for As (III). The reduced palladium particles are collected and dissolved in minimum amount of nitric acid. The quantification of arsenic was carried out using GFAAS. Optimization of the experimental conditions and instrumental parameters were investigated in detail. The proposed procedure was validated by applying it for the determination of the content of total As in Certified Reference Material BND 301-02 (NPL, India). The detection limit of arsenic in environmental water samples was 0.029 microg L(-1) with an enrichment factor of 50. The relative standard deviation (R.S.D.) for 10 replicate measurements of 5 microg mL(-1) was 4.2%. The proposed method was successfully applied for the determination of sub ppm to ppm levels of arsenic (V), (III) in environmental water samples.

  17. Simulation of solute transport of tetrachloroethylene in ground water of the glacial-drift aquifer at the Savage Municipal Well Superfund Site, Milford, New Hampshire, 1960-2000

    Science.gov (United States)

    Harte, Philip T.

    2004-01-01

    The Savage Municipal Well Superfund site, named after the former municipal water-supply well for the town of Milford, is underlain by a 0.5-square mile plume of volatile organic compounds (VOCs), primarily tetrachloroethylene (PCE). The plume occurs mostly within a highly transmissive sand-and-gravel unit, but also extends to an underlying till and bedrock unit. The plume logistically is divided into two areas termed Operable Unit No. 1 (OU1), which contains the primary source area, and Operable Unit No. 2 (OU2), which is the extended plume area. PCE concentrations in excess of 100,000 parts per billion (ppb) had been detected in the OU1 area in 1995, indicating a likely Dense Non-Aqueous Phase Liquid (DNAPL) source. In the fall of 1998, the New Hampshire Department of Environmental Services (NHDES) and the U.S. Environmental Protection Agency (USEPA) installed a remedial system in OU1. The OU1 remedial system includes a low-permeability barrier that encircles the highest detected concentrations of PCE, and a series of injection and extraction wells. The barrier primarily sits atop bedrock and penetrates the full thickness of the sand and gravel; and in some places, the full thickness of the underlying basal till. The sand and gravel unit and the till comprise the aquifer termed the Milford-Souhegan glacial-drift aquifer (MSGD). Two-dimensional and three-dimensional finite-difference solute-transport models of the unconsolidated sediments (MSGD aquifer) were constructed to help evaluate solute-transport processes, assess the effectiveness of remedial activities in OU1, and to help design remedial strategies in OU2. The solute-transport models simulate PCE concentrations, and model results were compared to observed concentrations of PCE. Simulations were grouped into the following three time periods: an historical calibration of the distribution of PCE from the initial input (circa 1960) of PCE into the subsurface to the 1990s, a pre-remedial calibration from 1995

  18. Borehole geophysical logging and aquifer-isolation tests conducted in well MG-1693 at North Penn Area 5 Superfund Site near Colmar, Montgomery County, Pennsylvania

    Science.gov (United States)

    Bird, Philip H.

    2006-01-01

    Borehole geophysical logging and aquifer-isolation (packer) tests were conducted in well MG-1693 (NP-87) at the North Penn Area 5 Superfund Site near Colmar, Montgomery County, Pa. Objectives of the study were to identify the depth and yield of water-bearing zones, occurrence of vertical borehole flow, and effects of pumping on water levels in nearby wells. Caliper, natural-gamma, single-point-resistance, fluid-temperature, fluid-resistivity, heatpulse-flowmeter, and borehole-video logs were collected. Vertical borehole-fluid movement direction and rate were measured under nonpumping conditions. The suite of logs was used to locate water-bearing fractures, determine zones of vertical borehole-fluid movement, and select depths to set packers. Aquifer-isolation tests were conducted to sample discrete intervals and to determine specific capacities of water-bearing zones and effects of pumping individual zones on water levels in two nearby monitor wells. Specific capacities of isolated zones during aquifer-isolation tests ranged from 0.03 to 3.09 (gal/min)/ft (gallons per minute per foot). Fractures identified by borehole geophysical methods as water-producing or water-receiving zones produced water when isolated and pumped. Water enters the borehole primarily through high-angle fractures at 416 to 435 ft bls (feet below land surface) and 129 to 136 ft bls. Water exits the borehole through a high-angle fracture at 104 to 107 ft bls, a broken casing joint at 82 ft bls, and sometimes as artesian flow through the top of the well. Thirteen intervals were selected for aquifer-isolation testing, using a straddle-packer assembly. The specific capacity of interval 1 was 2.09 (gal/min)/ft. The specific capacities of intervals 2, 3, and 4 were similar: 0.27, 0.30, and 0.29 (gal/min)/ft,respectively. The specific capacities of intervals 5, 6, 7, 8, and 10 were similar: 0.03, 0.04, 0.09, 0.09, and 0.04 (gal/min)/ft,respectively. Intervals 9, 11, and 12 each showed a strong

  19. Results of a monitoring program of continuous water levels and physical water properties at the Operable Unit 1 area of the Savage Municipal Well Superfund site, Milford, New Hampshire, water years 2000-03

    Science.gov (United States)

    Harte, Philip T.

    2005-01-01

    The Milford-Souhegan glacial-drift (MSGD) aquifer, in south-central New Hampshire, is an important source of industrial, commercial, and domestic water. The MSGD aquifer was also an important source of drinking water for the town of Milford until it was found to contain high concentrations of volatile organic compounds (VOCs) in the Savage and Keyes municipal-supply wells in the early 1980s. A VOC plume was found to cover part of the southwestern half of the MSGD aquifer. In September 1984, the site was designated a Superfund site, called the Savage Municipal Well Superfund site. The primary source area of contaminants was a former tool manufacturing facility (called the OK Tool facility, and now called the Operable Unit 1 (OU1) area) that disposed of solvents at the surface and in the subsurface. The facility was closed in 1987 and removed in 1998. A low-permeability containment barrier wall was constructed and installed in the overburden (MSGD aquifer) in 1998 to encapsulate the highest concentrations of VOCs, and a pump-and-treat remediation facility was also added. Remedial operations of extraction and injection wells started in May 1999. A network of water-level monitoring sites was implemented in water year 2000 (October 1, 1999, through September 30, 2000) in the OU1 area to help assess the effectiveness of remedial operations to mitigate the VOC plume, and to evaluate the effect of the barrier wall and remedial operations on the hydraulic connections across the barrier and between the overburden and underlying bedrock. Remedial extraction and injections wells inside and outside the barrier help isolate ground-water flow inside the barrier and the further spreading of VOCs. This report summarizes both continuous and selected periodic manual measurements of water level and physical water properties (specific conductance and water temperature) for 10 monitoring locations during water years 2000-03. Additional periodic manual measurements of water levels were

  20. Biota Modeling in EPA's Preliminary Remediation Goal and Dose Compliance Concentration Calculators for Use in EPA Superfund Risk Assessment: Explanation of Intake Rate Derivation, Transfer Factor Compilation, and Mass Loading Factor Sources

    Energy Technology Data Exchange (ETDEWEB)

    Manning, Karessa L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dolislager, Fredrick G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bellamy, Michael B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-11-01

    The Preliminary Remediation Goal (PRG) and Dose Compliance Concentration (DCC) calculators are screening level tools that set forth Environmental Protection Agency's (EPA) recommended approaches, based upon currently available information with respect to risk assessment, for response actions at Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) sites, commonly known as Superfund. The screening levels derived by the PRG and DCC calculators are used to identify isotopes contributing the highest risk and dose as well as establish preliminary remediation goals. Each calculator has a residential gardening scenario and subsistence farmer exposure scenarios that require modeling of the transfer of contaminants from soil and water into various types of biota (crops and animal products). New publications of human intake rates of biota; farm animal intakes of water, soil, and fodder; and soil to plant interactions require updates be implemented into the PRG and DCC exposure scenarios. Recent improvements have been made in the biota modeling for these calculators, including newly derived biota intake rates, more comprehensive soil mass loading factors (MLFs), and more comprehensive soil to tissue transfer factors (TFs) for animals and soil to plant transfer factors (BV's). New biota have been added in both the produce and animal products categories that greatly improve the accuracy and utility of the PRG and DCC calculators and encompass greater geographic diversity on a national and international scale.

  1. Site Enforcement Tracking System (SETS): PRP listing by site for Region 9

    Energy Technology Data Exchange (ETDEWEB)

    1992-07-01

    When expending Superfund monies at a CERCLA (Comprehensive Environmental Response, Compensation and Liability Act) site, EPA must conduct a search to identify parties with potential financial responsibility for remediation of uncontrolled hazardous waste sites. EPA regional Superfund Waste Management Staff issue a notice letter to the potentially responsible party (PRP). Data from the notice letter is used to form the Site Enforcement Tracking System (SETS). This data includes PRP name and address, a company contact person, the date the notice was issued, and the related CERCLA site name and identification number. SETS was created to track PRP identification at both NPL (National Priorities List) and non-NPL sites. SETS does not address the range of other administrative duties related to tracking the PRP. Region 9 includes American Samoa, Arizona, California, Guam, Hawaii, Midway, Nevada, Northern Marianas, Pacific Islands, Trust Territories, and Wake Island.

  2. Mercury characterization in Lahontan Valley Wetlands : Carson River Mercury Site : Lyon and Churchill Counties, Nevada, 1999

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — In 1999, the Nevada Fish and Wildlife Office of the U.S. Fish and Wildlife Service and the Superfund Division, U.S. Environmental Protection Agency, Region 9...

  3. Effects of changes in pumping on regional groundwater-flow paths, 2005 and 2010, and areas contributing recharge to discharging wells, 1990–2010, in the vicinity of North Penn Area 7 Superfund site, Montgomery County, Pennsylvania

    Science.gov (United States)

    Senior, Lisa A.; Goode, Daniel J.

    2017-06-06

    A previously developed regional groundwater flow model was used to simulate the effects of changes in pumping rates on groundwater-flow paths and extent of recharge discharging to wells for a contaminated fractured bedrock aquifer in southeastern Pennsylvania. Groundwater in the vicinity of the North Penn Area 7 Superfund site, Montgomery County, Pennsylvania, was found to be contaminated with organic compounds, such as trichloroethylene (TCE), in 1979. At the time contamination was discovered, groundwater from the underlying fractured bedrock (shale) aquifer was the main source of supply for public drinking water and industrial use. As part of technical support to the U.S. Environmental Protection Agency (EPA) during the Remedial Investigation of the North Penn Area 7 Superfund site from 2000 to 2005, the U.S. Geological Survey (USGS) developed a model of regional groundwater flow to describe changes in groundwater flow and contaminant directions as a result of changes in pumping. Subsequently, large decreases in TCE concentrations (as much as 400 micrograms per liter) were measured in groundwater samples collected by the EPA from selected wells in 2010 compared to 2005‒06 concentrations.To provide insight on the fate of potentially contaminated groundwater during the period of generally decreasing pumping rates from 1990 to 2010, steady-state simulations were run using the previously developed groundwater-flow model for two conditions prior to extensive remediation, 1990 and 2000, two conditions subsequent to some remediation 2005 and 2010, and a No Pumping case, representing pre-development or cessation of pumping conditions. The model was used to (1) quantify the amount of recharge, including potentially contaminated recharge from sources near the land surface, that discharged to wells or streams and (2) delineate the areas contributing recharge that discharged to wells or streams for the five conditions.In all simulations, groundwater divides differed from

  4. Water-quality trends and constituent-transport analysis for selected sampling sites in the Milltown Reservoir/Clark Fork River Superfund Site in the upper Clark Fork Basin, Montana, water years 1996–2015

    Science.gov (United States)

    Sando, Steven K.; Vecchia, Aldo V.

    2016-07-20

    During the extended history of mining in the upper Clark Fork Basin in Montana, large amounts of waste materials enriched with metallic contaminants (cadmium, copper, lead, and zinc) and the metalloid trace element arsenic were generated from mining operations near Butte and milling and smelting operations near Anaconda. Extensive deposition of mining wastes in the Silver Bow Creek and Clark Fork channels and flood plains had substantial effects on water quality. Federal Superfund remediation activities in the upper Clark Fork Basin began in 1983 and have included substantial remediation near Butte and removal of the former Milltown Dam near Missoula. To aid in evaluating the effects of remediation activities on water quality, the U.S. Geological Survey began collecting streamflow and water-quality data in the upper Clark Fork Basin in the 1980s.Trend analysis was done on specific conductance, selected trace elements (arsenic, copper, and zinc), and suspended sediment for seven sampling sites in the Milltown Reservoir/Clark Fork River Superfund Site for water years 1996–2015. The most upstream site included in trend analysis is Silver Bow Creek at Warm Springs, Montana (sampling site 8), and the most downstream site is Clark Fork above Missoula, Montana (sampling site 22), which is just downstream from the former Milltown Dam. Water year is the 12-month period from October 1 through September 30 and is designated by the year in which it ends. Trend analysis was done by using a joint time-series model for concentration and streamflow. To provide temporal resolution of changes in water quality, trend analysis was conducted for four sequential 5-year periods: period 1 (water years 1996–2000), period 2 (water years 2001–5), period 3 (water years 2006–10), and period 4 (water years 2011–15). Because of the substantial effect of the intentional breach of Milltown Dam on March 28, 2008, period 3 was subdivided into period 3A (October 1, 2005–March 27, 2008

  5. Evaluation of borehole geophysical logging, aquifer-isolation tests, distribution of contaminants, and water-level measurements at the North Penn Area 5 Superfund Site, Bucks and Montgomery counties, Pennsylvania

    Science.gov (United States)

    Bird, Philip H.; Conger, Randall W.

    2002-01-01

    Borehole geophysical logging and aquiferisolation (packer) tests were conducted at the North Penn Area 5 Superfund site in Bucks and Montgomery Counties, Pa. Caliper, naturalgamma, single-point-resistance, fluid-temperature, fluid-resistivity, heatpulse-flowmeter, and digital acoustic-televiewer logs and borehole television surveys were collected in 32 new and previously drilled wells that ranged in depth from 68 to 302 feet. Vertical borehole-fluid movement direction and rate were measured with a high-resolution heatpulse flowmeter under nonpumping conditions. The suite of logs was used to locate water-bearing fractures, determine zones of vertical borehole- fluid movement, select depths to set packers, and locate appropriate screen intervals for reconstructing new wells as monitoring wells. Aquifer-isolation tests were conducted in four wells to sample discrete intervals and to determine specific capacities of discrete water-bearing zones. Specific capacities of isolated zones during packer testing ranged from 0.12 to 15.30 gallons per minute per foot. Most fractures identified by borehole geophysical methods as water-producing or water-receiving zones produced water when isolated and pumped. The acoustic-televiewer logs define two basic fracture sets, bedding-plane partings with a mean strike of N. 62? E. and a mean dip of 27? NW., and high-angle fractures with a mean strike of N. 58? E. and a mean dip of 72? SE. Correlation of heatpulse-flowmeter data and acoustic-televiewer logs showed 83 percent of identified water-bearing fractures were high-angle fractures.

  6. Water-quality trends and constituent-transport analysis for selected sampling sites in the Milltown Reservoir/Clark Fork River Superfund Site in the upper Clark Fork Basin, Montana, water years 1996–2015

    Science.gov (United States)

    Sando, Steven K.; Vecchia, Aldo V.

    2016-07-20

    During the extended history of mining in the upper Clark Fork Basin in Montana, large amounts of waste materials enriched with metallic contaminants (cadmium, copper, lead, and zinc) and the metalloid trace element arsenic were generated from mining operations near Butte and milling and smelting operations near Anaconda. Extensive deposition of mining wastes in the Silver Bow Creek and Clark Fork channels and flood plains had substantial effects on water quality. Federal Superfund remediation activities in the upper Clark Fork Basin began in 1983 and have included substantial remediation near Butte and removal of the former Milltown Dam near Missoula. To aid in evaluating the effects of remediation activities on water quality, the U.S. Geological Survey began collecting streamflow and water-quality data in the upper Clark Fork Basin in the 1980s.Trend analysis was done on specific conductance, selected trace elements (arsenic, copper, and zinc), and suspended sediment for seven sampling sites in the Milltown Reservoir/Clark Fork River Superfund Site for water years 1996–2015. The most upstream site included in trend analysis is Silver Bow Creek at Warm Springs, Montana (sampling site 8), and the most downstream site is Clark Fork above Missoula, Montana (sampling site 22), which is just downstream from the former Milltown Dam. Water year is the 12-month period from October 1 through September 30 and is designated by the year in which it ends. Trend analysis was done by using a joint time-series model for concentration and streamflow. To provide temporal resolution of changes in water quality, trend analysis was conducted for four sequential 5-year periods: period 1 (water years 1996–2000), period 2 (water years 2001–5), period 3 (water years 2006–10), and period 4 (water years 2011–15). Because of the substantial effect of the intentional breach of Milltown Dam on March 28, 2008, period 3 was subdivided into period 3A (October 1, 2005–March 27, 2008

  7. AHR-related activities in a creosote-adapted population of adult atlantic killifish, Fundulus heteroclitus, two decades post-EPA superfund status at the Atlantic Wood Site, Portsmouth, VA USA

    Energy Technology Data Exchange (ETDEWEB)

    Wojdylo, Josephine V. [Department of Biological Sciences, Environmental Toxicology Graduate Program, Clemson University, Clemson, SC 29634 (United States); Vogelbein, Wolfgang [The College of William & Mary, Gloucester Point, VA 23062 (United States); Bain, Lisa J. [Department of Biological Sciences, Environmental Toxicology Graduate Program, Clemson University, Clemson, SC 29634 (United States); Rice, Charles D., E-mail: cdrice@clemson.edu [Department of Biological Sciences, Environmental Toxicology Graduate Program, Clemson University, Clemson, SC 29634 (United States)

    2016-08-15

    Highlights: • AHR-related activities in creosote-adapted adult killifish were examined. • Creosote-adapted adult killifish have elevated intestine CYP1A. • Creosote-adapted adult killifish have elevated liver COX2 mRNA expression. • Most creosote-adapted adult killifish have lesions varying in severity. • Liver lesions in creosote-adapted adult killifish express CYP1A and AHR2 proteins. - Abstract: Atlantic killifish, Fundulus heteroclitus, are adapted to creosote-based PAHs at the US EPA Superfund site known as Atlantic Wood (AW) on the southern branch of the Elizabeth River, VA USA. Subsequent to the discovery of the AW population in the early 1990s, these fish were shown to be recalcitrant to CYP1A induction by PAHs under experimental conditions, and even to the time of this study, killifish embryos collected from the AW site are resistant to developmental deformities typically associated with exposure to PAHs in reference fish. Historically, however, 90 +% of the adult killifish at this site have proliferative hepatic lesions including cancer of varying severity. Several PAHs at this site are known to be ligands for the aryl hydrocarbon receptor (AHR). In this study, AHR-related activities in AW fish collected between 2011 and 2013 were re-examined nearly 2 decades after first discovery. This study shows that CYP1A mRNA expression is three-fold higher in intestines of AW killifish compared to a reference population. Using immunohistochemistry, CYP1A staining in intestines was uniformly positive compared to negative staining in reference fish. Livers of AW killifish were examined by IHC to show that CYP1A and AHR2 protein expression reflect lesions-specific patterns, probably representing differences in intrinsic cellular physiology of the spectrum of proliferative lesions comprising the hepatocarcinogenic process. We also found that COX2 mRNA expression levels were higher in AW fish livers compared to those in the reference population, suggesting a

  8. Environmental assessment for the Groundwater Characterization Project, Nevada Test Site, Nye County, Nevada; Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-08-01

    The US Department of Energy (DOE) proposes to conduct a program to characterize groundwater at the Nevada Test Site (NTS), Nye County, Nevada, in accordance with a 1987 DOE memorandum stating that all past, present, and future nuclear test sites would be treated as Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) sites (Memorandum from Bruce Green, Weapons Design and Testing Division, June 6, 1987). DOE has prepared an environmental assessment (DOE/EA-0532) to evaluate the environmental consequences associated with the proposed action, referred to as the Groundwater Characterization Project (GCP). This proposed action includes constructing access roads and drill pads, drilling and testing wells, and monitoring these wells for the purpose of characterizing groundwater at the NTS. Long-term monitoring and possible use of these wells in support of CERCLA, as amended by the Superfund Amendments and Reauthorization Act, is also proposed. The GCP includes measures to mitigate potential impacts on sensitive biological, cultural and historical resources, and to protect workers and the environment from exposure to any radioactive or mixed waste materials that may be encountered. DOE considers those mitigation measures related to sensitive biological, cultural and historic resources as essential to render the impacts of the proposed action not significant, and DOE has prepared a Mitigation Action Plan (MAP) that explains how such mitigations will be planned and implemented. Based on the analyses presented in the EA, DOE has determined that the proposed action is not a major Federal action significantly affecting the quality of the human environment, within the meaning of the National Environmental Policy Act of 1969 (NEPA). Therefore, preparation of an environmental impact statement is not required and the Department is issuing this FONSI.

  9. Assessment of subsurface chlorinated solvent contamination using tree cores at the front street site and a former dry cleaning facility at the Riverfront Superfund site, New Haven, Missouri, 1999-2003

    Science.gov (United States)

    Schumacher, John G.; Struckhoff, Garrett C.; Burken, Joel G.

    2004-01-01

    Tree-core sampling has been a reliable and inexpensive tool to quickly assess the presence of shallow (less than about 30 feet deep) tetrachloroethene (PCE) and trichloroethene (TCE) contamination in soils and ground water at the Riverfront Superfund Site. This report presents the results of tree-core sampling that was successfully used to determine the presence and extent of chlorinated solvent contamination at two sites, the Front Street site (operable unit OU1) and the former dry cleaning facility, that are part of the overall Riverfront Superfund Site. Traditional soil and ground-water sampling at these two sites later confirmed the results from the tree-core sampling. Results obtained from the tree-core sampling were used to design and focus subsequent soil and ground-water investigations, resulting in substantial savings in time and site assessment costs. The Front Street site is a small (less than 1-acre) site located on the Missouri River alluvium in downtown New Haven, Missouri, about 500 feet from the south bank of the Missouri River. Tree-core sampling detected the presence of subsurface PCE contamination at the Front Street site and beneath residential property downgradient from the site. Core samples from trees at the site contained PCE concentrations as large as 3,850 mg-h/kg (micrograms in headspace per kilogram of wet core) and TCE concentrations as large as 249 mg-h/kg. Soils at the Front Street site contained PCE concentrations as large as 6,200,000 mg/kg (micrograms per kilogram) and ground-water samples contained PCE concentrations as large as 11,000 mg/L (micrograms per liter). The former dry cleaning facility is located at the base of the upland that forms the south bank of the Missouri River alluvial valley. Tree-core sampling did not indicate the presence of PCE or TCE contamination at the former dry cleaning facility, a finding that was later confirmed by the analyses of soil samples collected from the site. The lateral extent of PCE

  10. Risk Characterization Handbook

    Science.gov (United States)

    This Handbook has two parts. The first is the Risk Characterization guidance itself. The second part comprises the Appendices which contain the Risk Characterization Policy, the risk characterization case studies and references.

  11. Effects of a remedial system and its operation on volatile organic compound-contaminated ground water, Operable Unit 1, Savage Municipal Well Superfund Site, Milford, New Hampshire, 1998-2004

    Science.gov (United States)

    Harte, Philip T.

    2006-01-01

    The Savage Municipal Well Superfund site in the Town of Milford, N.H., is underlain by a 0.5-square mile plume of volatile organic compounds (VOCs), mostly tetrachloroethylene (PCE). The plume occurs mostly within a highly transmissive sand and gravel layer, but also extends into underlying till and bedrock. The plume has been divided into two areas called Operable Unit 1 (OU1), which contains the primary source area, and Operable Unit 2 (OU2), which is defined as the extended plume area. PCE concentrations in excess of 100,000 parts per billion (ppb) had been detected in the OU1 area in 1995, indicating a likely Dense Non-Aqueous Phase Liquid (DNAPL) source. In the fall of 1998, the New Hampshire Department of Environmental Services (NHDES) and the U.S. Environmental Protection Agency (USEPA) installed a remedial system in OU1 to contain and capture the dissolved VOC plume. The OU1 remedial system includes a low-permeability barrier wall that encircles the highest detected concentrations of PCE, and a series of injection and extraction wells to contain and remove contaminants. The barrier wall likely penetrates the full thickness of the sand and gravel; in most places, it also penetrates the full thickness of the underlying basal till and sits atop bedrock. Remedial injection and extraction wells have been operating since the spring of 1999 and include a series of interior (inside the barrier wall) injection and extractions wells and exterior (outside the barrier wall) injection and extraction wells. A recharge gallery outside the barrier wall receives the bulk of the treated water and reinjects it into the shallow aquifer. From 1998 to 2004, PCE concentrations decreased by an average of 80 percent at most wells outside the barrier wall. This decrease indicates (1) the barrier wall and interior extraction effectively contained high PCE concentrations inside the wall, (2) other sources of PCE did not appear to be outside of the wall, and (3) ambient ground

  12. Nanotechnology Characterization Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Nanotechnology Characterization Laboratory (NCL) at the Frederick National Laboratory for Cancer Research performs preclinical characterization of nanomaterials...

  13. Remediation System Evaluation, Havertown PCP Superfund Site

    Science.gov (United States)

    The Havertown PCP site is located in Havertown, Haverford Township, Delaware County, in southeastern Pennsylvania. The site contamination was first discovered in 1962 when the Pennsylvania State Department of Health became aware of contaminants in ...

  14. SUPERFUND TREATABILITY CLEARINGHOUSE: COMPOSITING OF EXPLOSIVES

    Science.gov (United States)

    This treatability study was conducted by Atlantic Research Corporation for the U.S. Army Toxic and Hazardous Material Agency. The objective of this bench-scale study was to determine the extent to which TNT and RDX concentrations were reduced by composting for a six week peri...

  15. Remediation System Evaluation, FCX Statesville Superfund Site

    Science.gov (United States)

    The FCX property was an agriculture distribution center that formulated, repackaged, and warehoused pesticides and fertilizers. The former Burlington Industries property to the north and upgradient of the FCX property was a textile facility.

  16. Superfund GIS - Regolith thickness in Tennessee

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset is a representation of the depth in feet to bedrock as reported in the driller's log for the Water Wells Database of the Tennessee Department of...

  17. Remedial investigation work plan for the Upper East Fork Poplar Creek characterization area, Oak Ridge Y-12 Plant, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Oak Ridge Y-12 Plant, located within the Oak Ridge Reservation (ORR), is owned by the US Department of Energy (DOE) and managed by Lockheed Martin Energy Systems, Inc. The entire ORR was placed on the National Priorities List (NPL) of CERCLA sites in November 1989. Following CERCLA guidelines, sites under investigation require a remedial investigation (RI) to define the nature and extent of contamination, evaluate the risks to public health and the environment, and determine the goals for a feasibility study (FS) of potential remedial actions. The need to complete RIs in a timely manner resulted in the establishment of the Upper East Fork Poplar Creek (UEFPC) Characterization Area (CA) and the Bear Creek CA. The CA approach considers the entire watershed and examines all appropriate media within it. The UEFPC CA, which includes the main Y-12 Plant area, is an operationally and hydrogeologically complex area that contains numerous contaminants and containment sources, as well as ongoing industrial and defense-related activities. The UEFPC CA also is the suspected point of origin for off-site groundwater and surface-water contamination. The UEFPC CA RI also will address a carbon-tetrachloride/chloroform-dominated groundwater plume that extends east of the DOE property line into Union Valley, which appears to be connected with springs in the valley. In addition, surface water in UEFPC to the Lower East Fork Poplar Creek CA boundary will be addressed. Through investigation of the entire watershed as one ``site,`` data gaps and contaminated areas will be identified and prioritized more efficiently than through separate investigations of many discrete units.

  18. Remedial investigation work plan for the Upper East Fork Poplar Creek characterization area, Oak Ridge Y-12 Plant, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Oak Ridge Y-12 Plant, located within the Oak Ridge Reservation (ORR), is owned by the US Department of Energy (DOE) and managed by Lockheed Martin Energy Systems, Inc. The entire ORR was placed on the National Priorities List (NPL) of CERCLA sites in November 1989. Following CERCLA guidelines, sites under investigation require a remedial investigation (RI) to define the nature and extent of contamination, evaluate the risks to public health and the environment, and determine the goals for a feasibility study (FS) of potential remedial actions. The need to complete RIs in a timely manner resulted in the establishment of the Upper East Fork Poplar Creek (UEFPC) Characterization Area (CA) and the Bear Creek CA. The CA approach considers the entire watershed and examines all appropriate media within it. The UEFPC CA, which includes the main Y-12 Plant area, is an operationally and hydrogeologically complex area that contains numerous contaminants and containment sources, as well as ongoing industrial and defense-related activities. The UEFPC CA also is the suspected point of origin for off-site groundwater and surface-water contamination. The UEFPC CA RI also will address a carbon-tetrachloride/chloroform-dominated groundwater plume that extends east of the DOE property line into Union Valley, which appears to be connected with springs in the valley. In addition, surface water in UEFPC to the Lower East Fork Poplar Creek CA boundary will be addressed. Through investigation of the entire watershed as one ``site,`` data gaps and contaminated areas will be identified and prioritized more efficiently than through separate investigations of many discrete units.

  19. Practical materials characterization

    CERN Document Server

    2014-01-01

    Presents cross-comparison between materials characterization techniquesIncludes clear specifications of strengths and limitations of each technique for specific materials characterization problemFocuses on applications and clear data interpretation without extensive mathematics

  20. Waste Characterization Methods

    Energy Technology Data Exchange (ETDEWEB)

    Vigil-Holterman, Luciana R. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Naranjo, Felicia Danielle [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-02-02

    This report discusses ways to classify waste as outlined by LANL. Waste Generators must make a waste determination and characterize regulated waste by appropriate analytical testing or use of acceptable knowledge (AK). Use of AK for characterization requires several source documents. Waste characterization documentation must be accurate, sufficient, and current (i.e., updated); relevant and traceable to the waste stream’s generation, characterization, and management; and not merely a list of information sources.

  1. Characterization and remediation of soil prior to construction of an on-site disposal facility at Fernald

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, A.; Jones, G. [Fluor Daniel Fernald, Inc., Cincinnati, OH (United States). Fernald Environmental Management Project; Janke, R. [Dept. of Energy (United States); Nelson, K. [Jacobs Engineering (United States)

    1998-03-01

    During the production years at the Feed Materials Production Center (FMPC), the soil of the site and the surrounding areas was surficially impacted by airborne contamination. The volume of impacted soil is estimated at 2.2 million cubic yards. During site remediation, this contamination will be excavated, characterized, and disposed of. In 1986 the US Environmental Protection Agency (EPA) and the Department of Energy (DOE) entered into a Federal Facility Compliance Agreement (FFCA) covering environmental impacts associated with the FMPC. A site wide Remedial Investigation/Feasibility Study (RI/FS) was initiated pursuant to the Comprehensive Environmental Response, Compensation, and Liability Act, as amended by the Superfund Amendments and Reauthorization Act (CERCLA). The DOE has completed the RI/FS process and has received approval of the final Records of Decision. The name of the facility was changed to the Fernald Environmental Management Project (FEMP) to emphasize the change in mission to environmental restoration. Remedial actions which address similar scopes of work or types of contaminated media have been grouped into remedial projects for the purpose of managing the remediation of the FEMP. The Soil Characterization and Excavation Project (SCEP) will address the remediation of FEMP soils, certain waste units, at- and below-grade material, and will certify attainment of the final remedial limits (FRLs) for the FEMP. The FEMP will be using an on-site facility for low level radioactive waste disposal. The facility will be an above-ground engineered structure constructed of geological material. The area designated for construction of the base of the on-site disposal facility (OSDF) is referred to as the footprint. Contaminated soil within the footprint must be identified and remediated. Excavation of Phase 1, the first of seven remediation areas, is complete.

  2. Report on a visit to the Neutron Metrology Laboratories at PTB, NPL and NRPB

    Energy Technology Data Exchange (ETDEWEB)

    Young, J.G

    1995-05-01

    The objectives of these visits were to gain a better insight into the philosophy and methods of neutron metrology, to receive advice and guidance regarding the design of a neutron calibration facility and to obtain experience in the methods used to calibrate neutron monitors. Since the Australian Radiation Laboratory (ARL) did not have a calibrated neutron monitor it was felt that this was an ideal opportunity to gain first hand experience by assisting with the calibration of an ARL monitor. This report provides a summary of the outcomes of the visit to the neutron metrology laboratories at Physikalisch-Technische Bundesanstalt (Germany), the National Physical Laboratory (UK) and the National Radiological Protection Board (UK). The information obtained during these visits was used to establish a neutron calibration facility at the Australian Radiation Laboratory

  3. CERCLIS Non-NPL Removal Sites in US EPA Region 3

    Data.gov (United States)

    U.S. Environmental Protection Agency — This data layer contains point locations of waste sites throughout EPA Region 3 that have come under the jurisdiction of CERCLA. Congress passed the Comprehensive...

  4. The use of thermistors in the NPL electron-beam calorimeter

    Science.gov (United States)

    McEwen, M. R.; Burns, D. T.; Williams, A. J.

    1993-03-01

    The system developed for calibrating thermistors, which have been employed in the primary standard electron beam graphite calorimeter for several years, and the results of investigations into self-heating and dose response are described. The overall uncertainty in measuring temperature rises is estimated to be +/- 0.1 percent at the 95 percent confidence level. The self-heating of the thermistor type used in the calorimeter was determined to be constant over the temperature range 14 to 29 C. The same thermistor type showed no change in response within the uncertainties to an accumulated dose up to 3000 kGy. A second type of thermistor (to be used in a new calorimeter) showed no change in sensitivity although there was a change in absolute resistance of approximately 0.1 percent per MGy.

  5. STRATEGI PENGELOLAAN NON PERFORMING LOAN (NPL BANK UMUM YANG GO PUBLIC

    Directory of Open Access Journals (Sweden)

    Selamet Riyadi

    2015-03-01

    Full Text Available Penelitian ini bertujuan untuk menganalisis pengaruh capital adequacy ratio, total aset, loan to deposit ratio, kualitas aktiva produktif dan biaya operasional terhadap pendapatan operasional terhadap non performing loan pada Bank Umum di Bursa Efek Indonesia periode tahun 2007sampai dengan tahun 2014. Sampel yang digunakan dalam penelitian ini adalah 10 Bank Umum di BEI. Penelitian ini menggunakan metode regresi data panel dengan efek random. Hasil penelitian menyimpulkan bahwa capital adequacy ratio, loan to deposit ratio, kualitas aktiva produktif dan biaya operasional terhadap pendapatan operasional berpengaruh signifikan terhadap non performing loan, sedangkan variabel total aset tidak berpengaruh signifikan terhadap non performing loan. Model efek random layak digunakan untuk mengestimasi pengaruh capital adequacy ratio, total aset, loan to deposit ratio, kualitas aktiva produktif dan biaya operasional terhadap pendapatan operasional terhadap non performing loan.

  6. Development of the NPL gamma-ray spectrometer NANA for traceable nuclear decay and structure studies.

    Science.gov (United States)

    Lorusso, G; Shearman, R; Regan, P H; Judge, S M; Bell, S; Collins, S M; Larijani, C; Ivanov, P; Jerome, S M; Keightley, J D; Lalkovski, S; Pearce, A K; Podolyak, Zs

    2016-03-01

    We present a brief report on the progress towards the construction of the National Nuclear Array (NANA), a gamma-ray coincidence spectrometer for discrete-line nuclear structure and decay measurements. The proposed spectrometer will combine a gamma-ray energy resolution of approximately 3% at 1MeV with sub-nanosecond timing discrimination between successive gamma rays in mutually coincident decay cascades. We also review a number of recent measurements using coincidence fast-timing gamma-ray spectroscopy for nuclear structure studies, which have helped to inform the design criteria for the NANA spectrometer.

  7. The Effect of Path Loss on QoS at NPL

    Directory of Open Access Journals (Sweden)

    Dinesh Sharma,

    2010-07-01

    Full Text Available Radio communication or radio propagation is important for growing technologies with proper design, development and management strategies for any wireless network. Radio propagation is specific about the site and varies extensively depending on terrains, frequency of operation, velocity of mobile terminal, interface sources and other parameters. exact description of radio channel through basic parameters and using the mathematical models are important to predict the signal coverage, attainable data rate explicit performance quality of substitute signaling and reception schemes. This paper shows the quality of service (QoS parameters and its possible realization at network planning level on the basis of path loss. Here we analyze the QoS in terms of received signal strength. To achieve this purpose we have taken the field data and calculated the path loss at 900 and 1800 MHz frequency and compared graphically with existing path loss models. After observing the results we conclude the QoS in urban area decreases rapidly as we move away from the transmitter with compared to sub urban and rural areas.

  8. Technical progress report, November 1, 1979-October 31, 1980. Report NPL-865. [Univ. of Colorado

    Energy Technology Data Exchange (ETDEWEB)

    1980-11-01

    Work carried out at the Nuclear Physics Laboratory of the University of Colorado from November 1, 1979 through October 31, 1980 is summarized. Emphasis was on light ion reaction studies with the AVF cyclotron. The high resolution magnetic spectrometer has allowed studies of nucleon transfer, scattering, and charge exchange reactions throughout the periodic table. More experiments have been run with solid state counters this year than has been the case recently, as a broad range spectra of the light nuclei where only moderate resolution is demanded were examined. Several of these experiments were undertaken for more detailed studies of excitations seen with higher energy probes. Multiple coincidence measurements with neutron and gamma-ray counters have opened a new program in pre-equilibrium reactions and provided a new signature for the study of neutron-deficient final nuclei. The neutron time of flight program has expanded to higher excitation and to use of the (d,n) and (..cap alpha..,n) direct nucleon transfer reactions. Three important experiments were completed at the EPICS pion scattering facility at LAMPF, and other low energy pion scattering data were obtained at TRIUMF. Several (p,d) runs at high energies were accomplished, some with polarized beams at TRIUMF. High-lying structures in medium mass nuclei were studied by the (p,n) reaction at Indiana. Interest in the use of polarized beams has been prompted by the theoretical successes in this area. This interest has led to the study of one- and two-nucleon transfer reactions on a range of nuclei at the Los Alamos tandem and at IUCF.

  9. Materials Characterization Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Materials Characterization Facility enables detailed measurements of the properties of ceramics, polymers, glasses, and composites. It features instrumentation...

  10. Nonlinear Materials Characterization Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Nonlinear Materials Characterization Facility conducts photophysical research and development of nonlinear materials operating in the visible spectrum to protect...

  11. Composites Characterization Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The purpose of the Composites Characterization Laboratory is to investigate new and/or modified matrix materials and fibers for advanced composite applications both...

  12. Photovoltaic Characterization Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — NIST's PV characterization laboratory is used to measure the electrical performance and opto-electronic properties of solar cells and modules. This facility consists...

  13. Bunker Hill Sediment Characterization Study

    Energy Technology Data Exchange (ETDEWEB)

    Neal A. Yancey; Debby F. Bruhn

    2009-12-01

    The long history of mineral extraction in the Coeur d’Alene Basin has left a legacy of heavy metal laden mine tailings that have accumulated along the Coeur d’Alene River and its tributaries (U.S. Environmental Protection Agency, 2001; Barton, 2002). Silver, lead and zinc were the primary metals of economic interest in the area, but the ores contained other elements that have become environmental hazards including zinc, cadmium, lead, arsenic, nickel, and copper. The metals have contaminated the water and sediments of Lake Coeur d’Alene, and continue to be transported downstream to Spokane Washington via the Spokane River. In 1983, the EPA listed the Bunker Hill Mining and Metallurgical Complex on the National Priorities List. Since that time, many of the most contaminated areas have been stabilized or isolated, however metal contaminants continue to migrate through the basin. Designation as a Superfund site causes significant problems for the economically depressed communities in the area. Identification of primary sources of contamination can help set priorities for cleanup and cleanup options, which can include source removal, water treatment or no action depending on knowledge about the mobility of contaminants relative to water flow. The mobility of contaminant mobility under natural or engineered conditions depends on multiple factors including the physical and chemical state (or speciation) of metals and the range of processes, some of which can be seasonal, that cause mobilization of metals. As a result, it is particularly important to understand metal speciation (National Research Council, 2005) and the link between speciation and the rates of metal migration and the impact of natural or engineered variations in flow, biological activity or water chemistry.

  14. Panel 3 - characterization

    Energy Technology Data Exchange (ETDEWEB)

    Erck, R.A.; Erdemir, A.; Janghsing Hsieh; Lee, R.H.; Xian Zheng Pan; Deming Shu [Argonne National Lab., IL (United States); Feldman, A. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Glass, J.T. [North Carolina State Univ., Raleigh (United States); Kleimer, R. [Coors Ceramics Co., Golden, CO (United States); Lawton, E.A. [JPL/Caltech, Pasadena, CA (United States); McHargue, C.J. [Univ. of Tennessee, Knoxville (United States)

    1993-01-01

    The task of this panel was to identify and prioritize needs in the area of characterization of diamond and diamond-like-carbon (DLC) films for use in the transportation industry. Until recent advances in production of inexpensive films of diamonds and DLC, it was not feasible that these materials could be mass produced. The Characterization Panel is restricting itself to identifying needs in areas that would be most useful to manufacturers and users in producing and utilizing diamond and DLC coatings in industry. These characterization needs include in-situ monitoring during growth, relation of structure to performance, and standards and definitions.

  15. Metric characterizations II

    CERN Document Server

    Blecher, David P

    2012-01-01

    The present paper is a sequel to our paper "Metric characterization of isometries and of unital operator spaces and systems". We characterize certain common objects in the theory of operator spaces (unitaries, unital operator spaces, operator systems, operator algebras, and so on), in terms which are purely linear-metric, by which we mean that they only use the vector space structure of the space and its matrix norms. In the last part we give some characterizations of operator algebras (which are not linear-metric in our strict sense described in the paper).

  16. How to characterize disorder

    Science.gov (United States)

    Egami, T.

    2016-05-01

    Researchers working on nuclear materials encounter disorder in the atomic structure all the time, usually caused by irradiation. The nature of disorder varies widely, from lattice defects to amorphous phase formation. Generally it is not easy to characterize the state of disorder with the accuracy necessary to elucidate the properties caused by structural disorder. However, owing to advances in the tools of characterization and rapid rise in computer power, significant progress has been made in characterizing structural disorder. We discuss how to describe and determine the structure and dynamics of disordered materials using scattering measurements and modeling. Lattice defects caused by irradiation usually has negative effects on properties, but glasses and highly disordered materials can be irradiation resistant, and could be useful as nuclear materials. Characterizing and controlling disorder is becoming an important endeavor in the field of nuclear materials.

  17. Characterization of complete denture

    National Research Council Canada - National Science Library

    Srivastava, Rajeev; Choukse, Vivek

    2011-01-01

    Characterization is a procedure in which the character or collective qualities of a person are introduced in the complete denture, either by modification of teeth or denture bases, to make it appear...

  18. Tank waste characterization basis

    Energy Technology Data Exchange (ETDEWEB)

    Brown, T.M.

    1996-08-09

    This document describes the issues requiring characterization information, the process of determining high priority tanks to obtain information, and the outcome of the prioritization process. In addition, this document provides the reasoning for establishing and revising priorities and plans.

  19. Site characterization handbook

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    This Handbook discusses both management and technical elements that should be considered in developing a comprehensive site characterization program. Management elements typical of any project of a comparable magnitude and complexity are combined with a discussion of strategies specific to site characterization. Information specific to the technical elements involved in site characterization is based on guidance published by the Nuclear Regulatory Commission (NRC) with respect to licensing requirements for LLW disposal facilities. The objective of this Handbook is to provide a reference for both NRC Agreement States and non-Agreement States for use in developing a comprehensive site characterization program that meets the specific objectives of the State and/or site developer/licensee. Each site characterization program will vary depending on the objectives, licensing requirements, schedules/budgets, physical characteristics of the site, proposed facility design, and the specific concerns raised by government agencies and the public. Therefore, the Handbook is not a prescriptive guide to site characterization. 18 refs., 6 figs.

  20. Site characterization handbook

    Energy Technology Data Exchange (ETDEWEB)

    1988-06-01

    This Handbook discusses both management and technical elements that should be considered in developing a comprehensive site characterization program. Management elements typical of any project of a comparable magnitude and complexity are combined with a discussion of strategies specific to site characterization. Information specific to the technical elements involved in site characterization is based on guidance published by the Nuclear Regulatory Commission (NRC) with respect to licensing requirements for LLW disposal facilities. The objective of this Handbook is to provide a reference for both NRC Agreement States and non-Agreement States for use in developing a comprehensive site characterization program that meets the specific objectives of the State and/or site developer/licensee. Each site characterization program will vary depending on the objectives, licensing requirements, schedules/budgets, physical characteristics of the site, proposed facility design, and the specific concerns raised by government agencies and the public. Therefore, the Handbook is not a prescriptive guide to site characterization. 18 refs., 6 figs.

  1. Space Solar Cell Characterization Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Measures, characterizes, and analyzes photovoltaic materials and devices. The primary focus is the measurement and characterization of solar cell response...

  2. Characterization of tribological materials

    CERN Document Server

    Glaeser, William A

    2014-01-01

    This classic text discusses the use of advanced surface science characterization techniques in friction, adhesive and abrasive wear, boundary lubrication, contact fatigue, and other important failure processes. Surface characterization of bearings, gears, seals, and other manufactured rolling and sliding surfaces are increasingly routine in advanced quality control of processes and in the manufacture of precision components. This book is an indispensable asset to scientists and engineers using tribological characterization techniques. New content in this edition include: four new figures to illustrate real surface contact added to Chapter 1. coverage of the use of the Environmental SEM (ESEM) in examining wear of fiber glass filled PTFE added to chapter 4. new information on the wear of ceramics added to Chapter 5. updates for new analytical systems added to Chapter 6. coverage of Atomic Force Microscope (ATM) and its usefulness in the field of nano-tribology, providing not only full microtopography of s...

  3. Tank characterization reference guide

    Energy Technology Data Exchange (ETDEWEB)

    De Lorenzo, D.S.; DiCenso, A.T.; Hiller, D.B.; Johnson, K.W.; Rutherford, J.H.; Smith, D.J. [Los Alamos Technical Associates, Kennewick, WA (United States); Simpson, B.C. [Westinghouse Hanford Co., Richland, WA (United States)

    1994-09-01

    Characterization of the Hanford Site high-level waste storage tanks supports safety issue resolution; operations and maintenance requirements; and retrieval, pretreatment, vitrification, and disposal technology development. Technical, historical, and programmatic information about the waste tanks is often scattered among many sources, if it is documented at all. This Tank Characterization Reference Guide, therefore, serves as a common location for much of the generic tank information that is otherwise contained in many documents. The report is intended to be an introduction to the issues and history surrounding the generation, storage, and management of the liquid process wastes, and a presentation of the sampling, analysis, and modeling activities that support the current waste characterization. This report should provide a basis upon which those unfamiliar with the Hanford Site tank farms can start their research.

  4. Characterizing Entanglement Sources

    CERN Document Server

    Lougovski, Pavel

    2009-01-01

    We discuss how to characterize entanglement sources with finite sets of measurements. The measurements do not have to be tomographically complete, and may consist of POVMs rather than von Neumann measurements. Our method yields a probability that the source generates an entangled state as well as estimates of any desired calculable entanglement measures, including their error bars. We apply two criteria, namely Akaike's information criterion and the Bayesian information criterion, to compare and assess different models (with different numbers of parameters) describing entanglement-generating devices. We discuss differences between standard entanglement-verificaton methods and our present method of characterizing an entanglement source.

  5. Characterization of Photovoltaic Generators

    Science.gov (United States)

    Boitier, V.; Cressault, Y.

    2011-01-01

    This paper discusses photovoltaic panel systems and reviews their electrical properties and use in several industrial fields. We explain how different photovoltaic panels may be characterized by undergraduate students at university using simple methods to retrieve their electrical properties (power, current and voltage) and compare these values…

  6. Pressure Core Characterization

    Science.gov (United States)

    Santamarina, J. C.

    2014-12-01

    Natural gas hydrates form under high fluid pressure and low temperature, and are found in permafrost, deep lakes or ocean sediments. Hydrate dissociation by depressurization and/or heating is accompanied by a multifold hydrate volume expansion and host sediments with low permeability experience massive destructuration. Proper characterization requires coring, recovery, manipulation and testing under P-T conditions within the stability field. Pressure core technology allows for the reliable characterization of hydrate bearing sediments within the stability field in order to address scientific and engineering needs, including the measurement of parameters used in hydro-thermo-mechanical analyses, and the monitoring of hydrate dissociation under controlled pressure, temperature, effective stress and chemical conditions. Inherent sampling effects remain and need to be addressed in test protocols and data interpretation. Pressure core technology has been deployed to study hydrate bearing sediments at several locations around the world. In addition to pressure core testing, a comprehensive characterization program should include sediment analysis, testing of reconstituted specimens (with and without synthetic hydrate), and in situ testing. Pressure core characterization technology can be used to study other gas-charged formations such as deep sea sediments, coal bed methane and gas shales.

  7. Characterization of Bacillus cereus

    NARCIS (Netherlands)

    Wijnands LM; Dufrenne JB; Leusden FM; MGB

    2002-01-01

    Bacillus cereus is a ubiquitary microorganism that may cause food borne disease. Pathogenicity, however, depends on various characteristics such as the ability to form (entero)-toxin(s) that can not be detected by microbiological methods. Further characterization of pathogenic properties is not only

  8. SYNTHESIS, CHARACTERIZATION AND ANTIMICROBIAL ...

    African Journals Online (AJOL)

    Preferred Customer

    Institute of Chemical Sciences, University of Peshawar, N.W.F.P., Pakistan ... The inverse process, i.e. coordinating a metal ion from an important biomolecule for instance, a zinc finger protein has been used to design novel .... earlier [34], whereas, the complexes were characterized on the basis of elemental analysis,.

  9. Spectroradiometry for LED characterization

    DEFF Research Database (Denmark)

    Dam-Hansen, Carsten

    Radiospectroscopy is the absolute measurement of electromagnetic radiation within a specific wavelength range. For characterization of LED components, light sources and lamps we are interested in absolute measurement of the spectral power distribution, SPD, in the visible and near infrared region...

  10. Fiscal year 1996 progress in implementing Section 120 of the Comprehensive Environmental Response, Compensation, and Liability Act. Tenth annual report to Congress

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    Congress passed the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) (Public Law 96-510), commonly known as Superfund, in 1980. The Superfund Amendments and Reauthorization Act (SARA) (Public Law 99-499), which amended CERCLA in 1986, added Section 120 regarding the cleanup of contaminated sites at Federal facilities. Under Section 120(e)(5) of CERCLA, each department, agency, or instrumentality of the Federal government responsible for compliance with Section 120 must submit an annual report to Congress concerning its progress in implementing the requirements of Section 120. The report must include information on the progress in reaching Interagency Agreements (IAGs), conducting remedial investigation and feasibility studies (RI/FSs), and performing remedial actions. Federal agencies that own or operate facilities on the National Priorities List (NPL) are required to begin an RI/FS for these facilities within 6 months after being placed on the NPL. Remediation of these facilities is addressed in an IAG between the Federal agency, the US Environmental Protection Agency (EPA), and in some instances the state within which the facility is located.

  11. Site Enforcement Tracking System (SETS): PRP listing by site for region 9

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-01

    When expending Superfund monies at a CERCLA (Comprehensive Environmental Response, Compensation and Liability Act) site, EPA must conduct a search to identify parties with potential financial responsibility for remediation of uncontrolled hazardous waste sites. EPA regional Superfund Waste Management Staff issue a notice letter to the potentially responsible party (PRP). Data from the notice letter are used to form the Site Enforcement Tracking System (SETS). The data include PRP name and address, a company contact person, the date the notice was issued, and the related CERCLA site name and identification number. SETS was created to track PRP identification at both NPL (National Priorities List) and non-NPL sites. SETS does not address the range of other administrative duties related to tracking the PRP. The site report is designed to provide PRP information linked by the associated site, which appears according to the state where the site is located. Region 9 includes American Samoa, Arizona, California, Guam, Hawaii, Midway, Nevada, Northern Marianas, Pacific Islands, Trust Territories, and Wake Island.

  12. Characterizing European cultural landscapes

    DEFF Research Database (Denmark)

    Tieskens, Koen F.; Schulp, Catharina J E; Levers, Christian

    2017-01-01

    European cultural landscapes are mostly characterized by only one of the dimensions. Our paper can help to identify pressures to cultural landscapes and thus to target measures for the conservation of these landscapes, to link similar landscapes in different regions, and to inform policy design on the most......Almost all rural areas in Europe have been shaped or altered by humans and can be considered cultural landscapes, many of which now are considered to entail valuable cultural heritage. Current dynamics in land management have put cultural landscapes under a huge pressure of agricultural...... intensification and land abandonment. To prevent the loss of cultural landscapes, knowledge on the location of different types of cultural landscapes is needed. In this paper, we present a characterization of European cultural landscapes based on the prevalence of three key dimensions of cultural landscapes...

  13. Graphene Synthesis and Characterization

    Science.gov (United States)

    2015-04-08

    AFRL-OSR-VA-TR-2015-0086 Graphene Synthesis and Characterization 130060 Andrea Cortes UNIVERSIDAD TECNICA FEDERICO SANTA MARIA Final Report 04/08...AND SUBTITLE Grant: Graphene synthesis and characterizatión 5a. CONTRACT NUMBER 5b. GRANT NUMBER FA9550-13-1-0060 5c. PROGRAM ELEMENT NUMBER 6...13. SUPPLEMENTARY NOTES 14. ABSTRACT Here is reported graphene synthesis by two methods, Chemical Vapor Deposition (CVD) using Acetylene as a

  14. A characterization of associativity

    Science.gov (United States)

    Charlesworth, Arthur

    1990-01-01

    A necessary and sufficient condition for associativity of a function is given, in terms of a particular relation being a function. The concept of an associative function is generalized to the concept of a function being asssociative relative to a sequence and a characterization of such relative associativity is also given. These two characteristics are applied to the problem of proving the associativity, or relative associativity, of a function.

  15. A Characterization of Polynomials

    DEFF Research Database (Denmark)

    Andersen, Kurt Munk

    1996-01-01

    Given the problem:which functions f(x) are characterized by a relation of the form:f[x1,x2,...,xn]=h(x1+x2+...+xn), where n>1 and h(x) is a given function? Here f[x1,x2,...,xn] denotes the divided difference on n points x1,x2,...,xn of the function f(x).The answer is: f(x) is a polynomial of degree...

  16. Probabilistic Logical Characterization

    DEFF Research Database (Denmark)

    Hermanns, Holger; Parma, Augusto; Segala, Roberto;

    2011-01-01

    Probabilistic automata exhibit both probabilistic and non-deterministic choice. They are therefore a powerful semantic foundation for modeling concurrent systems with random phenomena arising in many applications ranging from artificial intelligence, security, systems biology to performance model...... modeling. Several variations of bisimulation and simulation relations have proved to be useful as means to abstract and compare different automata. This paper develops a taxonomy of logical characterizations of these relations on image-finite and image-infinite probabilistic automata....

  17. Characterization of Metal Proteins

    Science.gov (United States)

    Unno, Masaki; Ikeda-Saito, Masao

    Some metals are essential for life. Most of these metals are associated with biological macromolecule like DNA (deoxyribonucleic acid), RNA (ribonucleic acid), and more often with proteins: metals bind or interact with them. A number of protein molecules intrinsically contain metals in their structure. Some of these proteins catalyze unique chemical reactions and perform specific physiological functions. In this chapter, we will shed light on the several metalcontaining proteins, termed metalloproteins, and other proteins interacting metals. We will also introduce several key techniques which have been used to characterize these proteins. Characterizing these proteins and to understand the relationships between their structures and functions shall continue to be one of the major avenues to solve the mysteries of life. At first, we introduce what are the protein structures and how these proteins interact with metals. In the next section, we discuss the physiological roles of some representative metals. Next, we show two examples of special metal cofactors those help the biological macromolecules to carry out their functions. Then we describe some functions of metalloproteins. Finally, we introduce some physical methods to characterize metalloproteins.

  18. On Characterizing Particle Shape

    Science.gov (United States)

    Ennis, Bryan J.; Rickman, Douglas; Rollins, A. Brent; Ennis, Brandon

    2014-01-01

    It is well known that particle shape affects flow characteristics of granular materials, as well as a variety of other solids processing issues such as compaction, rheology, filtration and other two-phase flow problems. The impact of shape crosses many diverse and commercially important applications, including pharmaceuticals, civil engineering, metallurgy, health, and food processing. Two applications studied here include the dry solids flow of lunar simulants (e.g. JSC-1, NU-LHT-2M, OB-1), and the flow properties of wet concrete, including final compressive strength. A multi-dimensional generalized, engineering method to quantitatively characterize particle shapes has been developed, applicable to both single particle orientation and multi-particle assemblies. The two-dimension, three dimension inversion problem is also treated, and the application of these methods to DEM model particles will be discussed. In the case of lunar simulants, flow properties of six lunar simulants have been measured, and the impact of particle shape on flowability - as characterized by the shape method developed here -- is discussed, especially in the context of three simulants of similar size range. In the context of concrete processing, concrete construction is a major contributor to greenhouse gas production, of which the major contributor is cement binding loading. Any optimization in concrete rheology and packing that can reduce cement loading and improve strength loading can also reduce currently required construction safety factors. The characterization approach here is also demonstrated for the impact of rock aggregate shape on concrete slump rheology and dry compressive strength.

  19. Characterizing Exoplanets with WFIRST

    Science.gov (United States)

    Robinson, Tyler D.; Stapelfeldt, Karl R.; Marley, Mark S.; Marchis, Franck; Fortney, Jonathan J.

    2017-01-01

    The Wide-Field Infrared Survey Telescope (WFIRST) mission is expected to be equipped with a Coronagraph Instrument (CGI) that will study and explore a diversity of exoplanets in reflected light. Beyond being a technology demonstration, the CGI will provide our first glimpses of temperate worlds around our nearest stellar neighbors. In this presentation, we explore how instrumental and astrophysical parameters will affect the ability of the WFIRST/CGI to obtain spectral and photometric observations that are useful for characterizing its planetary targets. We discuss the development of an instrument noise model suitable for studying the spectral characterization potential of a coronagraph-equipped, space-based telescope. To be consistent with planned technologies, we assume a baseline set of telescope and instrument parameters that include a 2.4 meter diameter primary aperture, an up-to-date filter set spanning the visible wavelength range, a spectroscopic wavelength range of 600-970 nm, and an instrument spectral resolution of 70. We present applications of our baseline model to a variety of spectral models of different planet types, emphasizing warm jovian exoplanets. With our exoplanet spectral models, we explore wavelength-dependent planet-star flux ratios for main sequence stars of various effective temperatures, and discuss how coronagraph inner and outer working angle constraints will influence the potential to study different types of planets. For planets most favorable to spectroscopic characterization—gas giants with extensive water vapor clouds—we study the integration times required to achieve moderate signal-to-noise ratio spectra. We also explore the sensitivity of the integration times required to detect key methane absorption bands to exozodiacal light levels. We conclude with a discussion of the opportunities for characterizing smaller, potentially rocky, worlds under a “rendezvous” scenario, where an external starshade is later paired with

  20. Characterization of solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Haerkoenen, J.; Tuominen, E.; Nybergh, K.; Ezer, Y.; Yli-Koski, M.; Sinkkonen, J. [Helsinki Univ. of Technology, Otaniemi (Finland). Dept. of Electrical and Communications Engineering

    1998-10-01

    Photovoltaic research in the Electron Physics Laboratory started in 1993, when laboratory joined the national TEKES/NEMO 2 research program. Since the beginning of the project, characterization as well as experimentally orientated development of the fabrication process of the solar cells were carried out parallery. The process development research started by the initiatives of the Finnish industry. At the moment a large amount of the laboratory personnel works on solar cell research and the financing comes mainly from external projects. The funding for the research has come from TEKES, Ministry of Education, Finnish Academy, GETA graduate school, special equipment grants of the university, and from the laboratory

  1. Characterizing Black Hole Mergers

    Science.gov (United States)

    Baker, John; Boggs, William Darian; Kelly, Bernard

    2010-01-01

    Binary black hole mergers are a promising source of gravitational waves for interferometric gravitational wave detectors. Recent advances in numerical relativity have revealed the predictions of General Relativity for the strong burst of radiation generated in the final moments of binary coalescence. We explore features in the merger radiation which characterize the final moments of merger and ringdown. Interpreting the waveforms in terms of an rotating implicit radiation source allows a unified phenomenological description of the system from inspiral through ringdown. Common features in the waveforms allow quantitative description of the merger signal which may provide insights for observations large-mass black hole binaries.

  2. Network Characterization Service (NCS)

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Guojun [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Yang, George [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Crowley, Brian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Agarwal, Deborah [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2001-06-06

    Distributed applications require information to effectively utilize the network. Some of the information they require is the current and maximum bandwidth, current and minimum latency, bottlenecks, burst frequency, and congestion extent. This type of information allows applications to determine parameters like optimal TCP buffer size. In this paper, we present a cooperative information-gathering tool called the network characterization service (NCS). NCS runs in user space and is used to acquire network information. Its protocol is designed for scalable and distributed deployment, similar to DNS. Its algorithms provide efficient, speedy and accurate detection of bottlenecks, especially dynamic bottlenecks. On current and future networks, dynamic bottlenecks do and will affect network performance dramatically.

  3. Battery Thermal Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Keyser, Matthew; Saxon, Aron; Powell, Mitchell; Shi, Ying

    2016-06-07

    This poster shows the progress in battery thermal characterization over the previous year. NREL collaborated with U.S. DRIVE and USABC battery developers to obtain thermal properties of their batteries, obtained heat capacity and heat generation of cells under various power profiles, obtained thermal images of the cells under various drive cycles, and used the measured results to validate thermal models. Thermal properties are used for the thermal analysis and design of improved battery thermal management systems to support achieve life and performance targets.

  4. Characterization of Pixel Sensors

    CERN Document Server

    Oliveira, Felipe Ferraz

    2017-01-01

    It was commissioned at CERN ATLAS pixel group a fluorescence setup for characterization of pixel sensors. The idea is to measure the energies of different targets to calibrate your sensor. It was measured four matrices (80, 95, 98 and 106) of the Investigator1 sensor with different deep PW using copper, iron and titanium as target materials. The matrix 80 has a higher gain (0.065 ± 0.002) and matrix 106 has a better energy resolution (0.05 ± 0.04). The noise of the setup is around 3.6 mV .

  5. Ultrasonic materials characterization

    Science.gov (United States)

    Smith, R. L.

    1987-02-01

    The National NDT Center at Harwell has been developing methods for the characterization of materials using ultrasonics. This paper reviews the progress made in applying ultrasonic attenuation measurements to the determination of such quantities as grain size and dislocation content. A method, ultrasonic attenuation spectral analysis, has been developed, which enables the contributions of scattering and absorption to the total attenuation to be separated. The theoretical advances that have been made are also described. Some of the practical applications of the technique are illustrated and future development discussed.

  6. CHARACTERIZATION OF SOLID CONES

    Institute of Scientific and Technical Information of China (English)

    Qiu Jinghui

    2008-01-01

    The author gives a dual characterization of solid cones in locally convex spaces.From this the author obtains some criteria for judging convex cones to be solid in various inds of locally convex spaces. Using a general expression of the interior of a solid cone,the author obtains a number of necessary and sufficient conditions for convex cones to be solid in the framework of Banach spaces. In particular, the author gives a dual relationship between solid cones and generalized sharp cones. The related known results are improved and extended.

  7. Waste Characterization: Approaches and Methods

    DEFF Research Database (Denmark)

    Lagerkvist, A.; Ecke, H.; Christensen, Thomas Højlund

    2011-01-01

    Characterization of solid waste is usually a difficult task because of the heterogeneity of the waste and its spatial as well as temporal variations. This makes waste characterization costly if good and reliable data with reasonable uncertainty is to be obtained. Therefore, a waste characterization...

  8. Mound facility physical characterization

    Energy Technology Data Exchange (ETDEWEB)

    Tonne, W.R.; Alexander, B.M.; Cage, M.R.; Hase, E.H.; Schmidt, M.J.; Schneider, J.E.; Slusher, W.; Todd, J.E.

    1993-12-01

    The purpose of this report is to provide a baseline physical characterization of Mound`s facilities as of September 1993. The baseline characterizations are to be used in the development of long-term future use strategy development for the Mound site. This document describes the current missions and alternative future use scenarios for each building. Current mission descriptions cover facility capabilities, physical resources required to support operations, current safety envelope and current status of facilities. Future use scenarios identify potential alternative future uses, facility modifications required for likely use, facility modifications of other uses, changes to safety envelope for the likely use, cleanup criteria for each future use scenario, and disposition of surplus equipment. This Introductory Chapter includes an Executive Summary that contains narrative on the Functional Unit Material Condition, Current Facility Status, Listing of Buildings, Space Plans, Summary of Maintenance Program and Repair Backlog, Environmental Restoration, and Decontamination and Decommissioning Programs. Under Section B, Site Description, is a brief listing of the Site PS Development, as well as Current Utility Sources. Section C contains Site Assumptions. A Maintenance Program Overview, as well as Current Deficiencies, is contained within the Maintenance Program Chapter.

  9. FRACTURING FLUID CHARACTERIZATION FACILITY

    Energy Technology Data Exchange (ETDEWEB)

    Subhash Shah

    2000-08-01

    Hydraulic fracturing technology has been successfully applied for well stimulation of low and high permeability reservoirs for numerous years. Treatment optimization and improved economics have always been the key to the success and it is more so when the reservoirs under consideration are marginal. Fluids are widely used for the stimulation of wells. The Fracturing Fluid Characterization Facility (FFCF) has been established to provide the accurate prediction of the behavior of complex fracturing fluids under downhole conditions. The primary focus of the facility is to provide valuable insight into the various mechanisms that govern the flow of fracturing fluids and slurries through hydraulically created fractures. During the time between September 30, 1992, and March 31, 2000, the research efforts were devoted to the areas of fluid rheology, proppant transport, proppant flowback, dynamic fluid loss, perforation pressure losses, and frictional pressure losses. In this regard, a unique above-the-ground fracture simulator was designed and constructed at the FFCF, labeled ''The High Pressure Simulator'' (HPS). The FFCF is now available to industry for characterizing and understanding the behavior of complex fluid systems. To better reflect and encompass the broad spectrum of the petroleum industry, the FFCF now operates under a new name of ''The Well Construction Technology Center'' (WCTC). This report documents the summary of the activities performed during 1992-2000 at the FFCF.

  10. PULP FIBER SIZE CHARACTERIZATION

    Institute of Scientific and Technical Information of China (English)

    Shijie Liu

    2004-01-01

    Pulp fiber length distribution characterization has been examined in this study. Because of the fiber morphology: slender in shape, fiber size distribution characterization is a very difficult task. Traditional technique involves separation of the particles by size,such as Bauer-McNett fiber classifier, and measuring the weight fractions. The particle fractions obtained may or may not reflect the desired size classification.On the other hand, the more recent technique through optical measurement of fiber length is limited by its inability to measure the mass of the particle fractions.Therefore, not only the two techniques fail to generate identical results, either one was accepted to be of better value. Pure hardwood kraft, softwood kraft, and their mixture samples have been measured for their fiber length distributions using an optical fiber quality analyzer: FQA. The data obtained from FQA are extensively studied to investigate more reliable way of representing the fiber length data and thus examining the viable route for measuring the fiber size distributions. It has been found that the fiber length averaged length 11 is a viable indicator of the average pulp fiber length. The fiber size fraction and/or distribution can be represented by the fiber "length" fractions.

  11. PAU camera: detectors characterization

    Science.gov (United States)

    Casas, Ricard; Ballester, Otger; Cardiel-Sas, Laia; Castilla, Javier; Jiménez, Jorge; Maiorino, Marino; Pío, Cristóbal; Sevilla, Ignacio; de Vicente, Juan

    2012-07-01

    The PAU Camera (PAUCam) [1,2] is a wide field camera that will be mounted at the corrected prime focus of the William Herschel Telescope (Observatorio del Roque de los Muchachos, Canary Islands, Spain) in the next months. The focal plane of PAUCam is composed by a mosaic of 18 CCD detectors of 2,048 x 4,176 pixels each one with a pixel size of 15 microns, manufactured by Hamamatsu Photonics K. K. This mosaic covers a field of view (FoV) of 60 arcmin (minutes of arc), 40 of them are unvignetted. The behaviour of these 18 devices, plus four spares, and their electronic response should be characterized and optimized for the use in PAUCam. This job is being carried out in the laboratories of the ICE/IFAE and the CIEMAT. The electronic optimization of the CCD detectors is being carried out by means of an OG (Output Gate) scan and maximizing it CTE (Charge Transfer Efficiency) while the read-out noise is minimized. The device characterization itself is obtained with different tests. The photon transfer curve (PTC) that allows to obtain the electronic gain, the linearity vs. light stimulus, the full-well capacity and the cosmetic defects. The read-out noise, the dark current, the stability vs. temperature and the light remanence.

  12. Carbon Characterization Laboratory Report

    Energy Technology Data Exchange (ETDEWEB)

    David Swank; William Windes; D.C. Haggard; David Rohrbaugh; Karen Moore

    2009-03-01

    The newly completed Idaho National Laboratory (INL) Carbon Characterization Laboratory (CCL) is located in Lab-C20 of the Idaho National Laboratory Research Center. This laboratory was established under the Next Generation Nuclear Plant (NGNP) Project to support graphite research and development activities. The CCL is designed to characterize and test carbon-based materials such as graphite, carbon-carbon composites, and silicon-carbide composite materials. The laboratory is fully prepared to measure material properties for nonirradiated carbon-based materials. Plans to establish the laboratory as a radiological facility within the next year are definitive. This laboratory will be modified to accommodate irradiated materials, after which it can be used to perform material property measurements on both irradiated and nonirradiated carbon-based material. Instruments, fixtures, and methods are in place for preirradiation measurements of bulk density, thermal diffusivity, coefficient of thermal expansion, elastic modulus, Young’s modulus, Shear modulus, Poisson ratio, and electrical resistivity. The measurement protocol consists of functional validation, calibration, and automated data acquisition.

  13. JANUS characterization report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    The JANUS Reactor was operated from 1965 to 1992. All of the fuel was removed and shipped offsite in 1993. To provide information for use in finalizing the planning for the decommissioning of the reactor, the Health Physics Section of Argonne National Laboratory performed a characterization of the facility in January and February 1996. The characterization included measurements for radioactivity, hazardous materials, lead in wall paint, and asbestos. Measurements and smear samples for surface contamination were collected from every wall, ceiling and floor of the facility. Samples to determine activity concentrations were collected from vertical and horizontal corings into the reactor shield and foundation, and from coring into walls of the high dose and low dose rooms. Soil samples were collected outdoors from two drill holes, one south and one north of the JANUS exhaust stack. The predominant radionuclides detected were {sup 60}Co, {sup 152}Eu, and {sup 154}Eu. The highest exposure rate was 175 mR/h at the center of the reactor core. No hazardous materials were found in pits or sumps. There are 20 identified areas with asbestos and 7 objects with lead based paint.

  14. Pultrusion process characterization

    Science.gov (United States)

    Vaughan, James G.; Hackett, Robert M.

    1991-01-01

    Pultrusion is a process through which high-modulus, lightweight composite structural members such as beams, truss components, stiffeners, etc., are manufactured. The pultrusion process, though a well-developed processing art, lacks a fundamental scientific understanding. The objective here was to determine, both experimentally and analytically, the process parameters most important in characterizing and optimizing the pultrusion of uniaxial fibers. The effects of process parameter interactions were experimentally examined as a function of the pultruded product properties. A numerical description based on these experimental results was developed. An analytical model of the pultrusion process was also developed. The objective of the modeling effort was the formulation of a two-dimensional heat transfer model and development of solutions for the governing differential equations using the finite element method.

  15. Optical characterization of muscle

    Science.gov (United States)

    Oliveira, Luís; Lage, Armindo; Pais Clemente, Manuel; Tuchin, Valery V.

    2012-03-01

    Optical characterization and internal structure of biological tissues is highly important for biomedical optics. In particular for optical clearing processes, such information is of vital importance to understand the mechanisms involved through the variation of the refractive indices of tissue components. The skeletal muscle presents a fibrous structure with an internal arrangement of muscle fiber cords surrounded by interstitial fluid that is responsible for strong light scattering. To determine the refractive index of muscle components we have used a simple method of measuring tissue mass and refractive index during dehydration. After performing measurements for natural and ten dehydration states of the muscle samples, we have determined the dependence between the refractive index of the muscle and its water content. Also, we have joined our measurements with some values reported in literature to perform some calculations that have permitted to determine the refractive index of the dried muscle fibers and their corresponding volume percentage inside the natural muscle.

  16. Molybdenum Tube Characterization report

    Energy Technology Data Exchange (ETDEWEB)

    Beaux II, Miles Frank [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Usov, Igor Olegovich [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-02-07

    Chemical vapor deposition (CVD) techniques have been utilized to produce free-standing molybdenum tubes with the end goal of nuclear fuel clad applications. In order to produce tubes with properties desirable for this application, deposition rates were lowered requiring long deposition durations on the order of 50 hours. Standard CVD methods as well as fluidized-bed CVD (FBCVD) methods were applied towards these objectives. Characterization of the tubes produced in this manner revealed material suitable for fuel clad applications, but lacking necessary uniformity across the length of the tubes. The production of freestanding Mo tubes that possess the desired properties across their entire length represents an engineering challenge that can be overcome in a next iteration of the deposition system.

  17. Spectroradiometry for LED characterization

    DEFF Research Database (Denmark)

    Dam-Hansen, Carsten

    Radiospectroscopy is the absolute measurement of electromagnetic radiation within a specific wavelength range. For characterization of LED components, light sources and lamps we are interested in absolute measurement of the spectral power distribution, SPD, in the visible and near infrared region....... Using integrating spheres for light collection setups for absolute total spectral flux is realized at the LED Light Lab at DTU Fotonik, Risø Campus. From these, both total radiant and luminous flux is determined and through electrical power measurement also the efficiency is determined. From the SPD...... colorimetric quantities like color coordinates, color temperature and color rendering indices are calculated. The facilities and special issues concerning LED measurements compared to traditional light sources are explained and examples from the “LED lighting quality program”, a project supported by the Danish...

  18. Land Cover Characterization Program

    Science.gov (United States)

    ,

    1997-01-01

    The U.S. Geological Survey (USGS) has a long heritage of leadership and innovation in land use and land cover mapping. The USGS Anderson system defined the principles for land use and land cover mapping that have been the model both nationally and internationally for more than 20 years. The Land Cover Characterization Program (LCCP) is founded on the premise that the Nation's needs for land cover and land use data are diverse and increasingly sophisticated. The range of projects, programs, and organizations that use land cover data to meet their planning, management, development, and assessment objectives has expanded significantly. The reasons for this are numerous, and include the improved capabilities provided by geographic information systems, better and more data-intensive analytic models, and increasing requirements for improved information for decision making. The overall goals of the LCCP are to:

  19. Characterization Challenges for Nanomaterials

    Energy Technology Data Exchange (ETDEWEB)

    Baer, Donald R.; Amonette, James E.; Engelhard, Mark H.; Gaspar, Daniel J.; Karakoti, Ajay S.; Kuchibhatla, Satyanarayana V N T; Nachimuthu, Ponnusamy; Nurmi, James; Qiang, You; Sarathy, Vaishnavi; Seal, Sudipta; Sharma, Amit M.; Tratnyek, P. G.; Wang, Chong M.

    2008-03-10

    Nanostructured materials are increasingly subject to nearly every type of chemical and physical analysis possible. Because of their small feature size there is a significant focus on tools with high spatial resolution. Because of their high surface area, it is also natural to characterize nanomaterials using tools designed to analyze surfaces. Regardless of the approach, nanostructured materials present a variety of obstacles to adequate, useful and needed analysis. This paper provides short overviews to some of the issues and complications including: particle stability, environmental effects, specimen handling, surface coating, contamination and time. Some specific examples are provided from a our work focused on ceria nanoparticles and iron metal-core/oxide-shell nanoparticles in which we use a combination of tools for routine analysis including XPS, TEM, and XRD and apply other methods as needed to obtain essential information.

  20. Characterization of dielectric materials

    Energy Technology Data Exchange (ETDEWEB)

    King, Danny J.; Babinec, Susan; Hagans, Patrick L.; Maxey, Lonnie C.; Payzant, Edward A.; Daniel, Claus; Sabau, Adrian S.; Dinwiddie, Ralph B.; Armstrong, Beth L.; Howe, Jane Y.; Wood, III, David L.; Nembhard, Nicole S.

    2017-06-27

    A system and a method for characterizing a dielectric material are provided. The system and method generally include applying an excitation signal to electrodes on opposing sides of the dielectric material to evaluate a property of the dielectric material. The method can further include measuring the capacitive impedance across the dielectric material, and determining a variation in the capacitive impedance with respect to either or both of a time domain and a frequency domain. The measured property can include pore size and surface imperfections. The method can still further include modifying a processing parameter as the dielectric material is formed in response to the detected variations in the capacitive impedance, which can correspond to a non-uniformity in the dielectric material.

  1. Radiation characterization summary :

    Energy Technology Data Exchange (ETDEWEB)

    Parma, Edward J.,; Quirk, Thomas J.; Lippert, Lance L.; Griffin, Patrick J; Naranjo, Gerald E.; Luker, Spencer Michael

    2013-04-01

    This document presents the facility-recommended characterization of the neutron, prompt gamma-ray, and delayed gamma-ray radiation fields in the Annular Core Research Reactor (ACRR) for the 44-inch-long lead-boron bucket in the central cavity on the 32-inch pedestal at the core centerline. The designation for this environment is ACRR-LB44-CC-32-cl. The neutron, prompt gamma-ray, and delayed gamma-ray energy spectra are presented as well as radial and axial neutron and gamma-ray flux profiles within the experiment area of the bucket. Recommended constants are given to facilitate the conversion of various dosimetry readings into radiation metrics desired by experimenters. Representative pulse and steady-state operations are presented with conversion examples.

  2. System Performance Characterization

    Energy Technology Data Exchange (ETDEWEB)

    van Dam, M A

    2004-05-26

    Characterizing an adaptive optics (AO) system refers to understanding its performance and limitations. The goal of an AO system is to correct wavefront aberrations. The uncorrected aberrations, called the residual errors and referred to in what follows simply as the errors, degrade the image quality in the science camera. Understanding the source of these errors is a great aid in designing an AO system and optimizing its performance. This chapter explains how to estimate the wavefront error terms and the relationship between the wavefront error and the degradation of the image. The analysis deals with the particular case of a HartmannShack wavefront sensor (WFS) and a continuous deformable mirror (DM), although the principles involved can be applied to any AO system.

  3. Characterization of piezoceramics

    Science.gov (United States)

    Brissaud, Michel

    1991-11-01

    A 3D approach to piezoelectric material characterization, based on the assumption that the coordinate axes are pure mode propagation directions, is described. In this case the general equations simplify and an analytical solution can be achieved. For two geometrical shapes (rectangular and cylindrical), stress and strain tensor components and the electrical impedance of the sample are obtained. These 3D equations show that the wave velocities and permittivity are intrinsic parameters of the medium and do not depend on either the sample geometry or the mode that is considered. This was not true for the 1D models where the wave velocities and permittivity are different for each of the modes or geometries.

  4. CHARACTERIZATION OF DAMAGED MATERIALS

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, P C; Dehaven, M; McClelland, M; Chidester, S; Maienschein, J L

    2006-06-23

    Thermal damage experiments were conducted on LX-04, LX-10, and LX-17 at high temperatures. Both pristine and damaged samples were characterized for their material properties. A pycnometer was used to determine sample true density and porosity. Gas permeability was measured in a newly procured system (diffusion permeameter). Burn rate was measured in the LLNL strand burner. Weight losses upon thermal exposure were insignificant. Damaged pressed parts expanded, resulting in a reduction of bulk density by up to 10%. Both gas permeabilities and burn rates of the damaged samples increased by several orders of magnitude due to higher porosity and lower density. Moduli of the damaged materials decreased significantly, an indication that the materials became weaker mechanically. Damaged materials were more sensitive to shock initiation at high temperatures. No significant sensitization was observed when the damaged samples were tested at room temperature.

  5. Photoelectronic characterization of heterointerfaces.

    Energy Technology Data Exchange (ETDEWEB)

    Brumbach, Michael Todd

    2012-02-01

    In many devices such as solar cells, light emitting diodes, transistors, etc., the performance relies on the electronic structure at interfaces between materials within the device. The objective of this work was to perform robust characterization of hybrid (organic/inorganic) interfaces by tailoring the interfacial region for photoelectron spectroscopy. Self-assembled monolayers (SAM) were utilized to induce dipoles of various magnitudes at the interface. Additionally, SAMs of molecules with varying dipolar characteristics were mixed into spatially organized structures to systematically vary the apparent work function. Polymer thin films were characterized by depositing films of varying thicknesses on numerous substrates with and without interfacial modifications. Hard X-ray photoelectron spectroscopy (HAXPES) was performed to evaluate a buried interface between indium tin oxide (ITO), treated under various conditions, and poly(3-hexylthiophene) (P3HT). Conducting polymer films were found to be sufficiently conducting such that no significant charge redistribution in the polymer films was observed. Consequently, a further departure from uniform substrates was taken whereby electrically disconnected regions of the substrate presented ideally insulating interfacial contacts. In order to accomplish this novel strategy, interdigitated electrodes were used as the substrate. Conducting fingers of one half of the electrodes were electrically grounded while the other set of electrodes were electronically floating. This allowed for the evaluation of substrate charging on photoelectron spectra (SCOPES) in the presence of overlying semiconducting thin films. Such an experiment has never before been reported. This concept was developed out of the previous experiments on interfacial modification and thin film depositions and presents new opportunities for understanding chemical and electronic changes in a multitude of materials and interfaces.

  6. Genomewide Search for Type 2 Diabetes Mellitus Susceptibility Loci in Finnish Families: The Botnia Study

    Science.gov (United States)

    Lindgren, C. M.; Mahtani, M. M.; Widén, E.; McCarthy, M. I.; Daly, M. J.; Kirby, A.; Reeve, M. P.; Kruglyak, L.; Parker, A.; Meyer, J.; Almgren, P.; Lehto, M.; Kanninen, T.; Tuomi, T.; Groop, L. C.; Lander, E. S.

    2002-01-01

    Type 2 diabetes mellitus is a heterogeneous inherited disorder characterized by chronic hyperglycemia resulting from pancreatic β-cell dysfunction and insulin resistance. Although the pathogenic mechanisms are not fully understood, manifestation of the disease most likely requires interaction between both environmental and genetic factors. In the search for such susceptibility genes, we have performed a genomewide scan in 58 multiplex families (comprising 440 individuals, 229 of whom were affected) from the Botnia region in Finland. Initially, linkage between chromosome 12q24 and impaired insulin secretion had been reported, by Mahtani et al., in a subsample of 26 families. In the present study, we extend the initial genomewide scan to include 32 additional families, update the affectation status, and fine map regions of interest, and we try to replicate the initial stratification analysis. In our analysis of all 58 families, we identified suggestive linkage to one region, chromosome 9p13-q21 (nonparametric linkage [NPL] score 3.9; P<.0002). Regions with nominal P values <.05 include chromosomes 2p11 (NPL score 2.0 [P<.03]), 3p24-p22 (NPL score 2.2 [P<.02]), 4q32-q33 (NPL score 2.5 [P<.01]), 12q24 (NPL score 2.1 [P<.03]), 16p12-11 (NPL score 1.7 [P<.05]), and 17p12-p11 (NPL score 1.9 [P<.03]). When chromosome 12q24 was analyzed in only the 32 additional families, a nominal P value <.04 was observed. Together with data from other published genomewide scans, these findings lend support to the hypothesis that regions on chromosome 9p13-q21 and 12q24 may harbor susceptibility genes for type 2 diabetes. PMID:11791216

  7. Magnetic Characterization of Organic Materials

    Science.gov (United States)

    2016-12-12

    and lasers. Given this expectation, we believe that our research on magnetic characterization of organic materials will translate into innovative...AFRL-AFOSR-JP-TR-2017-0005 Magnetic Characterization of Organic Materials Dongho Kim YONSEI UNIVERSITY UNIVERSITY-INDUSTRY FOUNDATION Final Report 12...Final 3. DATES COVERED (From - To) 10 Sep 2015 to 09 Sep 2016 4. TITLE AND SUBTITLE Magnetic Characterization of Organic Materials 5a.  CONTRACT

  8. Axiomatic Characterizations of Information Measures

    Directory of Open Access Journals (Sweden)

    Imre Csiszár

    2008-09-01

    Full Text Available Axiomatic characterizations of Shannon entropy, Kullback I-divergence, and some generalized information measures are surveyed. Three directions are treated: (A Characterization of functions of probability distributions suitable as information measures. (B Characterization of set functions on the subsets of {1; : : : ;N} representable by joint entropies of components of an N-dimensional random vector. (C Axiomatic characterization of MaxEnt and related inference rules. The paper concludes with a brief discussion of the relevance of the axiomatic approach for information theory.

  9. Waste Characterization: Approaches and Methods

    DEFF Research Database (Denmark)

    Lagerkvist, A.; Ecke, H.; Christensen, Thomas Højlund

    2011-01-01

    related to individual treatment processes and waste products are dealt with in the following chapters: Characteristic data on residential waste (Chapter 2.2), commercial and institutional waste (Chapter 2.3), industrial waste (Chapter 2.4) and construction and demolition waste (Chapter 2...... with limited representation. This chapter describes common approaches and methods in waste characterization including common terms, sampling, characterization methods and data evaluation. The focus is on the characterization of waste as it is generated or collected, while specific issues on characterization...

  10. Nanometer Characterization/Manipulation Facility

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Characterizes the nanometer scale of biological, chemical, physical, electronic, and mechanical properties of surfaces and thin films using scanning probe...

  11. Geostatistics and GIS: tools for characterizing environmental contamination.

    Science.gov (United States)

    Henshaw, Shannon L; Curriero, Frank C; Shields, Timothy M; Glass, Gregory E; Strickland, Paul T; Breysse, Patrick N

    2004-08-01

    Geostatistics is a set of statistical techniques used in the analysis of georeferenced data that can be applied to environmental contamination and remediation studies. In this study, the 1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene (DDE) contamination at a Superfund site in western Maryland is evaluated. Concern about the site and its future clean up has triggered interest within the community because residential development surrounds the area. Spatial statistical methods, of which geostatistics is a subset, are becoming increasingly popular, in part due to the availability of geographic information system (GIS) software in a variety of application packages. In this article, the joint use of ArcGIS software and the R statistical computing environment are demonstrated as an approach for comprehensive geostatistical analyses. The spatial regression method, kriging, is used to provide predictions of DDE levels at unsampled locations both within the site and the surrounding areas where residential development is ongoing.

  12. Fracture Toughness Characterization

    Directory of Open Access Journals (Sweden)

    Manuel Beltrán Z

    2014-11-01

    Full Text Available This paper addresses the fracture toughness ( , or also known as critical stress intensity Factor, according to conditions of Lineal Elastic Fracture Mechanics (LEFM. The characterization of the mechanical properties in tensile and fracture toughness of structural steel pipes API-5L used in hydrocarbons transportation was performed. For fracture toughness, the material was tested through fatigue crack propagation on standardized compact specimen (CT according to ASTM E-399 norm. A thickness (B equal to and a crack size (a equal to 0.5w were used. With the porpoise of establishing the adequate conditions at the crack tip, the specimens were subjected to fatigue pre-cracking by application of repeated cycles of load in tensile-tensile and constant load amplitude with a load ratio of R = 0.1. The experimental Compliance method was used based on data obtained from load vs. Crack Mouth Opening Displacement (CMOD. The results show a Stress Intensity factor of 35.88 MPa√m for a 25 mm crack size specimen. The device used for testing is a MTS-810 machine with capacity of 100KN and 6 kHz sampling rate, which meets the conditions of the ASTM E-399 standard. The cracking susceptibility of steel is influenced by the size, morphology and distribution of non-metallic inclusions, thermochemical interaction with the environment and microstructure.

  13. Characterization of HI Filaments

    Science.gov (United States)

    Lubar, Emily; Verschuur, Gerrit L.

    2017-01-01

    We characterized the properties of dramatic interstellar HI filaments to learn more about the dynamics and structure of such features. Using Gauss fitting software, we searched the Effelsburg-Bonn HI Survey data for indications of a simple twisting (toroidal) motion across these filaments. Instead, we found that the structure was more complicated than expected. Apparent angular widths of several filaments were measured using the Galactic Arecibo L-band Feed Array HI (GALFA-HI), Bonn, and Leident/Argentine/Bonn (LAB) surveys. Based on filament widths and other parameters, we conclude that magnetism is the dominant force opposing internal motion and maintaining the structure of these filaments. The apparent width as a function of beam width closely follows a relationship reported in 1993 for HI features in general. They tend to subtend an angle two times the beam width, suggesting that the features remain unresolved.The Arecibo Observatory is operated by SRI International under a cooperative agreement with the National Science Foundation (AST-1100968), and in alliance with Ana G. Méndez-Universidad Metropolitana, and the Universities Space Research Association. The Arecibo Observatory REU is funded under grant AST-1559849 to Universidad Metropolitana.

  14. Plant Phenotype Characterization System

    Energy Technology Data Exchange (ETDEWEB)

    Daniel W McDonald; Ronald B Michaels

    2005-09-09

    This report is the final scientific report for the DOE Inventions and Innovations Project: Plant Phenotype Characterization System, DE-FG36-04GO14334. The period of performance was September 30, 2004 through July 15, 2005. The project objective is to demonstrate the viability of a new scientific instrument concept for the study of plant root systems. The root systems of plants are thought to be important in plant yield and thus important to DOE goals in renewable energy sources. The scientific study and understanding of plant root systems is hampered by the difficulty in observing root activity and the inadequacy of existing root study instrumentation options. We have demonstrated a high throughput, non-invasive, high resolution technique for visualizing plant root systems in-situ. Our approach is based upon low-energy x-ray radiography and the use of containers and substrates (artificial soil) which are virtually transparent to x-rays. The system allows us to germinate and grow plant specimens in our containers and substrates and to generate x-ray images of the developing root system over time. The same plant can be imaged at different times in its development. The system can be used for root studies in plant physiology, plant morphology, plant breeding, plant functional genomics and plant genotype screening.

  15. PULP FIBER SIZE CHARACTERIZATION

    Institute of Scientific and Technical Information of China (English)

    ShijieLiu

    2004-01-01

    Pulp fiber length distribution characterization hasbeen examined in this study. Because of the fibermorphology: slender in shape, fiber size distributioncharacterization is a very difficult task. Traditionaltechnique involves separation of the particles by size,such as Bauer-McNett fiber classifier, and measuringthe weight fractions. Themay or may not reflect theparticle fractions obtaineddesired size classification.On the other hand, the more recent technique throughoptical measurement of fiber length is limited by itsinability to measure the mass of the particle fractions.Therefore, not only the two techniques fail togenerate identical results, either one was accepted tobe of better value. Pure hardwood kraft, softwoodkraft, and their mixture samples have been measuredfor their fiber length distributions using an opticalfiber quality analyzer: FQA. The data obtained fromFQA are extensively studied to investigate morereliable way of representing the fiber length data andthus examining the viable route for measuring thefiber size distributions. It has been found that thefiber length averaged length 1~ is a viable indicator ofthe average pulp fiber length. The fiber size fractionand/or distribution can be represented by the fiber"length" fractions.

  16. Characterizing Nanoscale Transient Communication.

    Science.gov (United States)

    Chen, Yifan; Anwar, Putri Santi; Huang, Limin; Asvial, Muhamad

    2016-04-01

    We consider the novel paradigm of nanoscale transient communication (NTC), where certain components of the small-scale communication link are physically transient. As such, the transmitter and the receiver may change their properties over a prescribed lifespan due to their time-varying structures. The NTC systems may find important applications in the biomedical, environmental, and military fields, where system degradability allows for benign integration into life and environment. In this paper, we analyze the NTC systems from the channel-modeling and capacity-analysis perspectives and focus on the stochastically meaningful slow transience scenario, where the coherence time of degeneration Td is much longer than the coding delay Tc. We first develop novel and parsimonious models to characterize the NTC channels, where three types of physical layers are considered: electromagnetism-based terahertz (THz) communication, diffusion-based molecular communication (DMC), and nanobots-assisted touchable communication (TouchCom). We then revisit the classical performance measure of ϵ-outage channel capacity and take a fresh look at its formulations in the NTC context. Next, we present the notion of capacity degeneration profile (CDP), which describes the reduction of channel capacity with respect to the degeneration time. Finally, we provide numerical examples to demonstrate the features of CDP. To the best of our knowledge, the current work represents a first attempt to systematically evaluate the quality of nanoscale communication systems deteriorating with time.

  17. Structural characterization of nitrimyoglobin.

    Science.gov (United States)

    Bondoc, L L; Timkovich, R

    1989-04-15

    Nitrimyoglobin was formed in greater than 94% yield by a simple reaction between excess nitrite and horse heart metmyoglobin at pH 5.5. This dark green pigment was shown by 1H NMR spectroscopy to be a single, pure product with a well defined tertiary structure that is highly similar to the starting myoglobin. Electronic spin states parallel those of myoglobin, although the relaxation times differ. Ligand binding reactions of nitrimyoglobin parallel those of normal myoglobin, but lead to a unique series of UV-visible spectra. In the ferrous state, nitrimyoglobin reversibly binds O2 with half-saturation of sites at an O2 partial pressure of 10.4 +/- 1.4 mm Hg. 1H NMR data indicate that the altered heme of nitrimyoglobin has not undergone reaction at any meso proton position, nor has it been partially saturated to the level of a chlorin. 15N NMR spectra indicate that only a single nitrogen was added to the protein as a nitro group. Extraction of the modified heme from nitrimyoglobin and spectroscopic characterization of the nitriheme by infrared spectroscopy and of the free base porphyrin methyl ester derived from nitriheme by 1H NMR indicate that the modification is regiospecific. The heme in nitrimyoglobin is 3-(trans-2-nitrovinyl)-2,7,12,18-tetramethyl-8-vinylporphyrin-13,1 7-dipropionic acid. In the Fisher nomenclature scheme, the 2-vinyl substituent is the site of modification and has been converted to a nitrovinyl group by substitution of a proton by -NO2.

  18. Characterization Methods of Encapsulates

    Science.gov (United States)

    Zhang, Zhibing; Law, Daniel; Lian, Guoping

    , reliable methods which can be used to characterize these properties of encapsulates are vital. In this chapter, the state-of-art of these methods, their principles and applications, and release mechanisms are described as follows.

  19. Characterizations of univariate continuous distributions

    CERN Document Server

    Ahsanullah, Mohammad

    2017-01-01

    Provides in an organized manner characterizations of univariate probability distributions with many new results published in this area since the 1978 work of Golambos & Kotz "Characterizations of Probability Distributions" (Springer), together with applications of the theory in model fitting and predictions.

  20. U.S. Environmental Protection Agency, Region 6 National Priorities List (NPL) Boundaries - 05/12/2014

    Data.gov (United States)

    U.S. Environmental Protection Agency — Boundaries of sites in U.S. Environmental Protection Agency, Region 6 which are documented as being part of the National Priorities List as of May 12, 2014. The...

  1. U.S. Environmental Protection Agency, Region 6 National Priorities List (NPL) Sites - 05/12/2014

    Data.gov (United States)

    U.S. Environmental Protection Agency — Point locations for sites in U.S. Environmental Protection Agency, Region 6 which are documented as being part of the National Priorities List as of May 12, 2014....

  2. MINE WASTE TECHNOLOGY PROGRAM; PHOSPHATE STABILIZATION OF HEAVY METALS CONTAMINATED MINE WASTE YARD SOILS, JOPLIN, MISSOURI NPL SITE

    Science.gov (United States)

    This document summarizes the results of Mine Waste Technology Project 22-Phosphate Stabilization of Heavy Metals-Contaminated Mine Waste Yard Soils. Mining, milling, and smelting of ores near Joplin, Missouri, have resulted in heavy metal contamination of the area. The Joplin s...

  3. Superfund GIS - 1:250,000 Geology of Tennessee.

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This data set is a digital representation of the printed 1:250,000 geologic maps from the Tennessee Department of Environment and Conservation, Division of Geology....

  4. Superfund and Toxic Release Inventory Sites - MDC_ContaminatedSite

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — A point feature class of open DERM Contaminated sites - see phase code for status of site. Contaminated sites identifies properties where environmental contamination...

  5. Carson Lake Pasture : Mercury Superfund Site : Soil investigation

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The objective of this investigation is to determine whether the soil in the CLkP exceeds the EPA's hazardous waste level criterion for mercury and whether there is...

  6. BIOLOGICAL TREATMENT OF LEACHATE FROM A SUPERFUND SITE

    Science.gov (United States)

    Studies have heen completed on treating a leachate from New Lyme, Ohio. The leachate was transported to Cincinnati, Ohio, where a pilot-sized rotating biological contactor (RBC) was used for a treatment evaluation. he biomass was developed on the ARC discs with primary effluent f...

  7. A biological assessment of Wildcat Landfill Superfund Site

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document was prepared as part of the Wildcat Landfill Remedial Investigation (RI) Report; the report was financed through a grant and authority of CERCLA as...

  8. Monitoring Well Development Guidelines for Superfund Project Managers

    Science.gov (United States)

    This document provides well development guidelines and recommended additional sources of information. It was developed by the Supertund Ground Water Forum and draws upon U.S. Army Corps of Engineersand draft RCRA SW-846 field protocols. Comments..

  9. Optimization Review, Fairfield Coal Gasification Plant Superfund Site, Fairfield, Iowa

    Science.gov (United States)

    The Fairfield Coal Gasification Plant (FCGP) also known as the Fairfield Former Manufactured Gas Plant (MGP) is located in the southwest 1/4 of the southeast 1/4, Section 26, Township 72 North, Range 10 West of Jefferson County, Iowa.

  10. Superfund and Toxic Release Inventory Sites - MDC_ContaminatedSite

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — A point feature class of open DERM Contaminated sites - see phase code for status of site. Contaminated sites identifies properties where environmental contamination...

  11. Superfund GIS - Soil thickness, permeability, texture, and classification in Tennessee

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset was developed for use with the Tennessee STATSGO data base as an additional datafile. Each record in the datafile relates to a STATSGO MUID number which...

  12. Uruguayan tallow characterization

    Directory of Open Access Journals (Sweden)

    Cecilia Rodríguez

    2011-04-01

    Full Text Available Eatable tallow is the product  obtained fusing oily, from clean and  healthy tissues (included the fats of clippings, and from muscles or bones adherents of bovine animals (Bos tsurus,  lambs (Ovis aries in good conditions of health in the moment of its sacrifice and whose has been treated and therefore are considered suitable for the human consumption.To obtain fat from the raw, this material must surrender to a previous treatment that breaks the adipose cells, by  mechanical destruction, boiling or by treatment with alcáli. The easiest  way  consists of the mechanical disintegration (breakup under heat, using steam in direct or indirect form. This product can be obtained by one of the following : discontinuous merger, humid constant merger and  continues merger at low temperature. At present is used in the  cosmetic industry (production of soaps, for nutrition (raw material for margarine, ranching (for the manufacture of food concentrated for animals, for the self propelling industry (raw material for the production of biodiesel. The major purpose of this work is the tallow characterization from the determination of the following parameters :Moisture and Volatile Matter (g/100g of sample, Melting Point (1C, Free Acidity (g. Oleic acid /100g of sample, Colour (yellow and red and Insoluble Matter (g/100g.de shows of 15 samples of animal tallow from Uruguay, in order to provide useful information for the selection of the material. The Norm used as reference was the AOCS (American Oil Chemistry Society. With the obtained information it has been realized a statistical exploratory analysis. The preliminary results, due to the high variability of the studied factors, do not allow to establish with the current number of samples a  model who explains the above mentioned variability, neither at first, to reduce the quantity of factors to consider; in effect, the regression of the moisture against the rest of the factors determined the

  13. OLEM Center for Program Analysis Site Analysis Data

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes environmental justice-related analyses of population located within a mile of Superfund and RCRA Corrective Action sites. It characterizes...

  14. CCD characterization and measurements automation

    Energy Technology Data Exchange (ETDEWEB)

    Kotov, I.V., E-mail: kotov@bnl.gov [Brookhaven National Laboratory, Upton, NY 11973 (United States); Frank, J.; Kotov, A.I. [Brookhaven National Laboratory, Upton, NY 11973 (United States); Kubanek, P. [Institute of Physics of the Academy of Sciences, Prague, CZ 18221 (Czech Republic); Image Processing Laboratory, Universidad de Valencia (Spain); O' Connor, P. [Brookhaven National Laboratory, Upton, NY 11973 (United States); Prouza, M. [Institute of Physics of the Academy of Sciences, Prague, CZ 18221 (Czech Republic); Radeka, V.; Takacs, P. [Brookhaven National Laboratory, Upton, NY 11973 (United States)

    2012-12-11

    Modern mosaic cameras have grown both in size and in number of sensors. The required volume of sensor testing and characterization has grown accordingly. For camera projects as large as the LSST, test automation becomes a necessity. A CCD testing and characterization laboratory was built and is in operation for the LSST project. Characterization of LSST study contract sensors has been performed. The characterization process and its automation are discussed, and results are presented. Our system automatically acquires images, populates a database with metadata information, and runs express analysis. This approach is illustrated on {sup 55}Fe data analysis. {sup 55}Fe data are used to measure gain, charge transfer efficiency and charge diffusion. Examples of express analysis results are presented and discussed.

  15. Recent developments in QGP characterization

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Sangyong [Department of Physics, McGill University, Montréal (Canada)

    2016-01-22

    In recent years, great progress has been made in characterizing quark-gluon plasma (QGP) being created in ultra-relativistic heavy ion collisions. The article briefly reviews QGP characteristics found in hydrodynamic studies of the QGP collective flows.

  16. Characterization of Multiplicative Metric Completeness

    Directory of Open Access Journals (Sweden)

    Badshshah e Romer

    2016-03-01

    Full Text Available We established fixed point theorems in multiplicative metric spaces. The obtained results generalize Banach contraction principle in multiplicative metric spaces and also characterize completeness of the underlying multiplicative metric space.

  17. Multifractal approach for seafloor characterization

    Digital Repository Service at National Institute of Oceanography (India)

    Chakraborty, B.; Haris, K.; Latha, G.; Maslov, N.; Menezes, A.A.A.

    to characterize the seafloor. Two distinct multifractal formalisms are applied to determine the characteristics. The first formalism employs data analyses using generalized dimension D(q) and multifractal singularity spectrum f(alpha) linked shape parameters...

  18. 324 Building Baseline Radiological Characterization

    Energy Technology Data Exchange (ETDEWEB)

    R.J. Reeder, J.C. Cooper

    2010-06-24

    This report documents the analysis of radiological data collected as part of the characterization study performed in 1998. The study was performed to create a baseline of the radiological conditions in the 324 Building.

  19. Characterization of Nanostructured Polymer Films

    Science.gov (United States)

    2014-12-23

    AFRL-OSR-VA-TR-2015-0059 Characterization of Nanostructured Polymer Films RODNEY PRIESTLEY TRUSTEES OF PRINCETON UNIVERSITY Final Report 12/23/2014...Report 3. DATES COVERED (From - To) 06/01/2012-08/31/2014 4. TITLE AND SUBTITLE Characterization of Nanostructured Polymer Films 5a. CONTRACT...properties is due to the film morphology, i.e., the films are nanostructured . The aim of this proposal was to understand the mechanism of film formation and

  20. Vortex Characterization for Engineering Applications

    Energy Technology Data Exchange (ETDEWEB)

    Jankun-Kelly, M; Thompson, D S; Jiang, M; Shannahan, B; Machiraju, R

    2008-01-30

    Realistic engineering simulation data often have features that are not optimally resolved due to practical limitations on mesh resolution. To be useful to application engineers, vortex characterization techniques must be sufficiently robust to handle realistic data with complex vortex topologies. In this paper, we present enhancements to the vortex topology identification component of an existing vortex characterization algorithm. The modified techniques are demonstrated by application to three realistic data sets that illustrate the strengths and weaknesses of our approach.

  1. Proteomics Characterization of Exosome Cargo

    OpenAIRE

    Schey, Kevin L.; Luther, J. Matthew; Rose, Kristie L

    2015-01-01

    Characterization of exosomal cargo is of significant interest because this cargo can provide clues to exosome biogenesis, targeting, and cellular effects and may be a source of biomarkers for disease diagnosis, prognosis and response to treatment. With recent improvements in proteomics technologies, both qualitative and quantitative characterization of exosomal proteins is possible. Here we provide a brief review of exosome proteomics studies and provide detailed protocols for global qualitat...

  2. NMR characterization of thin films

    Science.gov (United States)

    Gerald, II, Rex E.; Klingler, Robert J.; Rathke, Jerome W.; Diaz, Rocio; Vukovic, Lela

    2008-11-25

    A method, apparatus, and system for characterizing thin film materials. The method, apparatus, and system includes a container for receiving a starting material, applying a gravitational force, a magnetic force, and an electric force or combinations thereof to at least the starting material, forming a thin film material, sensing an NMR signal from the thin film material and analyzing the NMR signal to characterize the thin film of material.

  3. Characterizing Financial and Statistical Literacy

    DEFF Research Database (Denmark)

    Di Girolamo, Amalia; Harrison, Glenn W.; Lau, Morten

    We characterize the literacy of an individual in a domain by their elicited subjective belief distribution over the possible responses to a question posed in that domain. We consider literacy across several financial, economic and statistical domains. We find considerable demographic heterogeneity...... approach to characterize financial capability, the consequences of non-literacy, social literacy, and the information content of hypothetical survey measures of literacy....

  4. Photovoltaics Characterization: An Overview; Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Kao, Y. H. (State University of New York at Buffalo); Kazmerski, L.; Mascarenhas, A. (National Renewable Energy Laboratory); Lynn, K. G. (Washington State University)

    1999-04-01

    In order to move to a next generation of characterization methods, the requirements must be fully understood and documented. Presented herein are the required functionalities for the next generation of characterization methods. This paper is not meant to be exhaustive, but instead presents new developing characterization methods. The basic characterization requirements are outlined in the introduction. It is expected that in the future, phenomena will be understood on the atomic scale and applied to large-scale arrays for a complete understanding of the various affects that determine the real cell efficiency. There is a need for a fundamental understanding from atomic and nanoscale characterizations of impurities, native defects, extended defects and interfaces to provide the necessary understanding of these types of PV cells. This information from fundamental probes should be used for input to the performance characterization of the developing technologies, which include high-flux operation, multijunction and lower band-gap systems. These methods will allow new materials to come to realization at a much faster rate than was possible in previous years.

  5. Discrete Stein characterizations and discrete information distances

    CERN Document Server

    Ley, Christophe

    2012-01-01

    We construct two different Stein characterizations of discrete distributions and use these to provide a natural connection between Stein characterizations for discrete distributions and discrete information functionals.

  6. High Speed On-Wafer Characterization Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — At the High Speed On-Wafer Characterization Laboratory, researchers characterize and model devices operating at terahertz (THz) and millimeter-wave frequencies. The...

  7. High Speed On-Wafer Characterization Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — At the High Speed On-Wafer Characterization Laboratory, researchers characterize and model devices operating at terahertz (THz) and millimeter-wave frequencies. The...

  8. Real-time Monitoring Network to Characterize Anthropogenic and Natural Events Affecting the Hudson River, NY

    Science.gov (United States)

    Islam, M. S.; Bonner, J. S.; Fuller, C.; Kirkey, W.; Ojo, T.

    2011-12-01

    transition region between fresh and saline water, captured the occurrence of strong precipitation event on the Hudson river as indicated by reduced water column salinity levels in the water column. Despite the large influx of freshwater and suspended solids originating as precipitation runoff, tidal forces dominated the net water transport and coincident suspended particle load. Such information is crucial to track the particle-driven contaminant movement in the water column. Both the FRVP and MRUP have been deployed in an active Poly-Chlorinated Biphenyls Superfund site to characterize the fundamental sediment transport mechanisms affecting remedial dredging operations. A potential application of this monitoring system is in the development of an adaptive remedial operation, where activity would be adjusted to maintain conditions within threshold limits based on real time environmental observations. Further, observational REON data can be integrated with water quality and hydrodynamic models that can be used to evaluate episodic events and their subsequent impacts to the Hudson River.

  9. Image Analysis for Tongue Characterization

    Institute of Scientific and Technical Information of China (English)

    SHENLansun; WEIBaoguo; CAIYiheng; ZHANGXinfeng; WANGYanqing; CHENJing; KONGLingbiao

    2003-01-01

    Tongue diagnosis is one of the essential methods in traditional Chinese medical diagnosis. The ac-curacy of tongue diagnosis can be improved by tongue char-acterization. This paper investigates the use of image anal-ysis techniques for tongue characterization by evaluating visual features obtained from images. A tongue imaging and analysis instrument (TIAI) was developed to acquire digital color tongue images. Several novel approaches are presented for color calibration, tongue area segmentation,quantitative analysis and qualitative description for the colors of tongue and its coating, the thickness and moisture of coating and quantification of the cracks of the toilgue.The overall accuracy of the automatic analysis of the colors of tongue and the thickness of tongue coating exceeds 85%.This work shows the promising future of tongue character-ization.

  10. Biophysical characterization of GPCR oligomerization

    DEFF Research Database (Denmark)

    Mathiasen, Signe

    a quantitative characterization of GPCR oligomerization. The assay provided the first quantification of the association energy of the β2 Adrenergic Receptor (β2AR), a prototypical GPCR. Furthermore we directly observed the time-dependent dimerization of β2AR and Cannabinoid receptor 1 at the single molecule......The biophysical characterization of the fundamental molecular mechanisms behind G-protein coupled receptors (GPCRs) oligomerization is proposed to be paramount for understanding the pharmacological consequence of receptor self-association. Here we developed an in vitro assay that allowed...

  11. Optic probe for semiconductor characterization

    Science.gov (United States)

    Sopori, Bhushan L.; Hambarian, Artak

    2008-09-02

    Described herein is an optical probe (120) for use in characterizing surface defects in wafers, such as semiconductor wafers. The optical probe (120) detects laser light reflected from the surface (124) of the wafer (106) within various ranges of angles. Characteristics of defects in the surface (124) of the wafer (106) are determined based on the amount of reflected laser light detected in each of the ranges of angles. Additionally, a wafer characterization system (100) is described that includes the described optical probe (120).

  12. Magnetic characterization techniques for nanomaterials

    CERN Document Server

    2017-01-01

    Sixth volume of a 40 volume series on nanoscience and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about Magnetic Characterization Techniques for Nanomaterials. Modern applications and state-of-the-art techniques are covered and make this volume an essential reading for research scientists in academia and industry.

  13. Characterizations of Graded Distributive Modules

    Institute of Scientific and Technical Information of China (English)

    Qinghua Chen; Chang'an Li

    2002-01-01

    In this paper, we give some characterizations of graded distributive modules, prove some interesting results between graded rings (modules) and lattices under finiteness conditions, and investigate the direct sum of graded distributive modules in terms of orders of graded submodules and homomorphisms of graded factor modules.

  14. Structure Characterization Using Mathematical Morphology

    NARCIS (Netherlands)

    Luengo Hendriks, C.L.

    2004-01-01

    This thesis deals with the application of mathematical morphology to images of some kind of structure, with the intention of characterizing (or describing) that structure. The emphasis is placed on measuring properties of the real-world scene, rather than measuring properties of the digital image. T

  15. Raman spectroscopy for nanomaterials characterization

    CERN Document Server

    2012-01-01

    First volume of a 40-volume series on nanoscience and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about Raman spectroscopy for the characterization of nanomaterials. Modern applications and state-of-the-art techniques are covered and make this volume essential reading for research scientists in academia and industry.

  16. Characterizing the human hematopoietic CDome

    DEFF Research Database (Denmark)

    Barnkob, Mike Stein; Simon, Christian; Olsen, Lars Rønn

    2014-01-01

    , we seek to give a preliminary characterization of the "human hematopoietic CDome." We encountered severe gaps in the knowledge of CD protein expression, mostly resulting from incomplete and unstructured data generation, which we argue inhibit both basic research as well as therapies seeking to target...

  17. FTIR characterization of advanced materials

    Science.gov (United States)

    Young, P. R.; Chang, A. C.

    1986-01-01

    This paper surveys the application of Fourier transform infrared spectroscopy to the characterization of advanced materials. FTIR sampling techniques including internal and external reflectance and photoacoustic spectroscopy are discussed. Representative examples from the literature of the analysis of resins, fibers, prepregs and composites are reviewed. A discussion of several promising specialized FTIR techniques is also presented.

  18. On Characterization of Quadratic Splines

    DEFF Research Database (Denmark)

    Chen, B. T.; Madsen, Kaj; Zhang, Shuzhong

    2005-01-01

    that the representation can be refined in a neighborhood of a non-degenerate point and a set of non-degenerate minimizers. Based on these characterizations, many existing algorithms for specific convex quadratic splines are also finite convergent for a general convex quadratic spline. Finally, we study the relationship...

  19. Composite materials processing, applications, characterizations

    CERN Document Server

    2017-01-01

    Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.

  20. Characterization of moose intestinal glycosphingolipids.

    Science.gov (United States)

    Johansson, Miralda Madar; Dedic, Benjamin; Lundholm, Klara; Branzell, Filip Berner; Barone, Angela; Benktander, John; Teneberg, Susann

    2015-08-01

    As a part of a systematic investigation of the species-specific expression of glycosphingolipids, acid and non-acid glycosphingolipids were isolated from three small intestines and one large intestine of the moose (Alces alces). The glycosphingolipids were characterized by binding of monoclonal antibodies, lectins and bacteria in chromatogram binding assays, and by mass spectrometry. The non-acid fractions were complex mixtures, and all had glycosphingolipids belonging to the lacto- and neolactoseries (lactotriaosylceramide, lactotetraosylceramide, neolactotetraosylceramide, Galα3-Le(x) hexaosylceramide, and lacto-neolactohexaosylceramide), globo-series (globotriaosylceramide and globotetraosylceramide), and isogloboseries (isoglobotriaosylceramide). Penta- and heptaglycosylceramides with terminal Galili determinants were also characterized. Furthermore, glycosphingolipids with terminal blood group O determinants (H triaosylceramide, H type 2 pentaosylceramide, H type 1 penta- and heptaosylceramide) were characterized in two of the moose small intestines, and in the one large intestine, while the third small intestine had glycosphingolipids with terminal blood group A determinants (A tetraosylceramide, A type 1 hexa- and octaosylceramide, A dodecaosylceramide). The acid glycosphingolipid fractions of moose small and large intestine contained sulfatide, and the gangliosides GM3, GD3, GD1a, GD1b, and also NeuGc and NeuAc variants of the Sd(a) ganglioside and the sialyl-globopenta/SSEA-4 ganglioside. In humans, the NeuAc-globopenta/SSEA-4 ganglioside is a marker of embryonic and adult stem cells, and is also expressed in several human cancers. This is the first time sialyl-globopentaosylceramide/SSEA-4 has been characterized in a fully differentiated normal tissue, and also the first time NeuGc-globopentaosylceramide has been characterized.

  1. Optical Characterization of Nanostructured Surfaces

    DEFF Research Database (Denmark)

    Feidenhans'l, Nikolaj Agentoft

    spectrum; the new method only evaluates the color of the reflected light using a standard RGB color camera. Color scatterometry provides the combined advantages of spectroscopic scatterometry, which provides fast evaluations, and imaging scatterometry that provides an overview image from which small...... implementation, a range of complementing characterization methods is needed to perform high-speed quality control of the nanostructures. This thesis concerns the development of a new method for fast in-line characterization of periodic nanostructures. The focus is on optical scatterometry, which uses inverse......, with trapezoidal profiles approximately ~200 nm high and with periods between 600 nm and 5000 nm. The heights and filling factors are determined with an accuracy of ~8 %, while the sidewall slopes have larger uncertainties due to a lower influence on the reflected light. The thesis also evaluates the use...

  2. Photoacoustic elastic oscillation and characterization.

    Science.gov (United States)

    Gao, Fei; Feng, Xiaohua; Zheng, Yuanjin

    2015-08-10

    Photoacoustic imaging and sensing have been studied extensively to probe the optical absorption of biological tissue in multiple scales ranging from large organs to small molecules. However, its elastic oscillation characterization is rarely studied and has been an untapped area to be explored. In literature, photoacoustic signal induced by pulsed laser is commonly modelled as a bipolar "N-shape" pulse from an optical absorber. In this paper, the photoacoustic damped oscillation is predicted and modelled by an equivalent mass-spring system by treating the optical absorber as an elastic oscillator. The photoacoustic simulation incorporating the proposed oscillation model shows better agreement with the measured signal from an elastic phantom, than conventional photoacoustic simulation model. More interestingly, the photoacoustic damping oscillation effect could potentially be a useful characterization approach to evaluate biological tissue's mechanical properties in terms of relaxation time, peak number and ratio beyond optical absorption only, which is experimentally demonstrated in this paper.

  3. Sturm-Liouville eigenvalue characterizations

    Directory of Open Access Journals (Sweden)

    Paul B. Bailey

    2012-07-01

    Full Text Available We study the relationship between the eigenvalues of separated self-adjoint boundary conditions and coupled self-adjoint conditions. Given an arbitrary real coupled boundary condition determined by a coupling matrix K we construct a one parameter family of separated conditions and show that all the eigenvalues for K and -K are extrema of the eigencurves of this family. This characterization makes it possible to use the well known Prufer transformation which has been used very successfully, both theoretically and numerically, for separated conditions, also in the coupled case. In particular, this characterization makes it possible to compute the eigenvalues for any real coupled self-adjoint boundary condition using any code which works for separated conditions.

  4. Aerosol characterization during project POLINAT

    Energy Technology Data Exchange (ETDEWEB)

    Hagen, D.E.; Hopkins, A.R.; Paladino, J.D.; Whitefield, P.D. [Missouri Univ., Rolla, MO (United States). Cloud and Aerosol Sciences Lab.; Lilenfeld, H.V. [McDonnell Douglas Aerospace-East, St. Louis, MO (United States)

    1997-12-31

    The objectives of the aerosol/particulate characterization measurements of project POLINAT (POLlution from aircraft emissions In the North ATlantic flight corridor) are: to search for aerosol/particulate signatures of air traffic emissions in the region of the North Atlantic Flight Corridor; to search for the aerosol/particulate component of large scale enhancement (`corridor effects`) of air traffic related species in the North Atlantic region; to determine the effective emission indices for the aerosol/particulate component of engine exhaust in both the near and far field of aircraft exhaust plumes; to measure the dispersion and transformation of the aerosol/particulate component of aircraft emissions as a function of ambient condition; to characterize background levels of aerosol/particulate concentrations in the North Atlantic Region; and to determine effective emission indices for engine exhaust particulates for regimes beyond the jet phase of plume expansion. (author) 10 refs.

  5. Ultrasonic techniques for fluids characterization

    CERN Document Server

    Povey, Malcolm J W

    1997-01-01

    This book is a comprehensive and practical guide to the use of ultrasonic techniques for the characterization of fluids. Focusing on ultrasonic velocimetry, the author covers the basic topics and techniques necessaryfor successful ultrasound measurements on emulsions, dispersions, multiphase media, and viscoelastic/viscoplastic materials. Advanced techniques such as scattering, particle sizing, and automation are also presented. As a handbook for industrial and scientific use, Ultrasonic Techniques for Fluids Characterization is an indispensable guide to chemists and chemical engineers using ultrasound for research or process monitoring in the chemical, food processing, pharmaceutical, cosmetic, biotechnology,and fuels industries. Key Features * Appeals to anyone using ultrasound to study fluids * Provides the first detailed description of the ultrasound profiling technique for dispersions * Describes new techniques for measuring phase transitions and nucleation, such as water/ice and oil/fat * Presents the l...

  6. Perceptual Color Characterization of Cameras

    Directory of Open Access Journals (Sweden)

    Javier Vazquez-Corral

    2014-12-01

    Full Text Available Color camera characterization, mapping outputs from the camera sensors to an independent color space, such as \\(XYZ\\, is an important step in the camera processing pipeline. Until now, this procedure has been primarily solved by using a \\(3 \\times 3\\ matrix obtained via a least-squares optimization. In this paper, we propose to use the spherical sampling method, recently published by Finlayson al., to perform a perceptual color characterization. In particular, we search for the \\(3 \\times 3\\ matrix that minimizes three different perceptual errors, one pixel based and two spatially based. For the pixel-based case, we minimize the CIE \\(\\Delta E\\ error, while for the spatial-based case, we minimize both the S-CIELAB error and the CID error measure. Our results demonstrate an improvement of approximately 3for the \\(\\Delta E\\ error, 7& for the S-CIELAB error and 13% for the CID error measures.

  7. Proteomics characterization of exosome cargo.

    Science.gov (United States)

    Schey, Kevin L; Luther, J Matthew; Rose, Kristie L

    2015-10-01

    Characterization of exosomal cargo is of significant interest because this cargo can provide clues to exosome biogenesis, targeting, and cellular effects and may be a source of biomarkers for disease diagnosis, prognosis and response to treatment. With recent improvements in proteomics technologies, both qualitative and quantitative characterization of exosomal proteins is possible. Here we provide a brief review of exosome proteomics studies and provide detailed protocols for global qualitative, global quantitative, and targeted quantitative analysis of exosomal proteins. In addition, we provide an example application of a standard global quantitative analysis followed by validation via a targeted quantitative analysis of urine exosome samples from human patients. Advantages and limitations of each method are discussed as well as future directions for exosome proteomics analysis.

  8. Photoacoustic elastic oscillation and characterization

    CERN Document Server

    Gao, Fei; Zheng, Yuanjin

    2014-01-01

    Photoacoustic imaging and sensing have been studied extensively to probe the optical absorption of biological tissue in multiple scales ranging from large organs to small molecules. However, its elastic oscillation characterization is rarely studied and has been an untapped area to be explored. In literature, photoacoustic signal induced by pulsed laser is commonly modelled as a bipolar "N-shape" pulse from an optical absorber. In this paper, the photoacoustic damped oscillation is predicted and modelled by an equivalent mass-spring system by treating the optical absorber as an elastic oscillator. The photoacoustic simulation incorporating the proposed oscillation model shows better agreement with the measured signal from an elastic phantom, than conventional photoacoustic simulation model. More interestingly, the photoacoustic damping oscillation effect could potentially be a useful characterization approach to evaluate biological tissue's mechanical properties in terms of relaxation time, peak number and ra...

  9. AFIP-6 Characterization Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Dennis D. Keiser

    2011-12-01

    The AFIP-6 (ATR Full-size-plate In center flux trap Position) Characterization Summary Report outlines the fresh fuel characterization efforts performed during the AFIP-6 experiment. The AFIP-6 experiment was designed to evaluate the performance of monolithic uranium-molybdenum (U-Mo) fuels at a scale prototypic of Advanced Test Reactor (ATR) fuel plates (45-inches long). The AFIP-6 test was the first test with plates that were swaged into the rails of the assembly. This test served to examine the effects of a plate in a swaged condition with longer fuel zones (22.5-inches long), that were centered in the plate. AFIP-6 test plates employed a zirconium interlayer that was co-rolled with the fuel foil. Previous mini-plate and AFIP irradiation experiments performed in ATR have demonstrated the stable behavior of the interface between the U-Mo fuel and the zirconium interlayer.

  10. What characterizes planetary space weather?

    OpenAIRE

    2014-01-01

    International audience; Space weather has become a mature discipline for the Earth space environment. With increasing efforts in space exploration, it is becoming more and more necessary to understand the space environments of bodies other than Earth. This is the background for an emerging aspect of the space weather discipline: planetary space weather. In this article, we explore what characterizes planetary space weather, using some examples throughout the solar system. We consider energy s...

  11. A Characterization of Prediction Errors

    OpenAIRE

    Meek, Christopher

    2016-01-01

    Understanding prediction errors and determining how to fix them is critical to building effective predictive systems. In this paper, we delineate four types of prediction errors and demonstrate that these four types characterize all prediction errors. In addition, we describe potential remedies and tools that can be used to reduce the uncertainty when trying to determine the source of a prediction error and when trying to take action to remove a prediction errors.

  12. Acoustical characterization of portuguese libraries

    OpenAIRE

    António Pedro Oliveira de Carvalho; António Eduardo Batista da Costa

    2010-01-01

    This paper presents the acoustical characterization of the main reading room of 28 public li-braries in Portugal. In situ measurements were held regarding the interior sound pressure lev-els (background noise, with and without the HVAC equipment working), the Noise Criteria and Noise Rating values (NC/NR), the objective speech intelligibility using the Rapid Speech Transmission Index (RASTI) and Reverberation Time (125 to 4k Hz). Two groups of librar-ies were formed (Classic and Modern librar...

  13. Fracturing fluid characterization facility (FFCF)

    Energy Technology Data Exchange (ETDEWEB)

    Evans, R.D.; Roegiers, J.C.; Fagan, J.

    1993-12-31

    The Fracturing Fluid Characterization Facility project has as its main focus the design, fabrication, and construction of a high pressure simulator (HPS) and a low pressure simulator (LPS) to be used to experimentally investigate the rheological properties and transport characteristics of proppant laden fracturing fluids. A discussion of each apparatus is provided as well as the auxiliary equipment, and data acquisition and control systems associated with the simulators.

  14. RF Characterization of Superconducting Samples

    CERN Document Server

    Junginger, T; Welsch, C

    2009-01-01

    At CERN a compact Quadrupole Resonator has been re-commissioned for the RF characterization of superconducting materials at 400 MHz. In addition the resonator can also be excited at multiple integers of this frequency. Besides Rs it enables determination of the maximum RF magnetic field, the thermal conductivity and the penetration depth of the attached samples, at different temperatures. The features of the resonator will be compared with those of similar RF devices and first results will be presented.

  15. Characterizing perception of ecological risk.

    Science.gov (United States)

    McDaniels, T; Axelrod, L J; Slovic, P

    1995-10-01

    Relatively little attention has been paid to the role of human perception and judgment in ecological risk management. This paper attempts to characterize perceived ecological risk, using the psychometric paradigm developed in the domain of human health risk perception. The research began by eliciting a set of scale characteristics and risk items (e.g., technologies, actions, events, beliefs) from focus group participants. Participants in the main study were 68 university students who completed a survey instrument that elicited ratings for each of 65 items on 30 characteristic scales and one scale regarding general risk to natural environments. The results are presented in terms of mean responses over individuals for each scale and item combination. Factor analyses show that five factors characterize the judgment data. These have been termed: impact on species, human benefits, impact on humans, avoidability, and knowledge of impacts. The factor results correspond with initial expectations and provide a plausible characterization of judgments regarding ecological risk. Some comparisons of mean responses for selected individual items are also presented.

  16. Instrumentation for CTA site characterization

    CERN Document Server

    Fruck, Christian; Ernenwein, Jean-Pierre; Mandát, Dušan; Schweizer, Thomas; Häfner, Dennis; Bulik, Tomasz; Cieslar, Marek; Costantini, Heide; Dominik, Michal; Ebr, Jan; Garczarczyk, Markus; Lorentz, Eckart; Pareschi, Giovanni; Pech, Miroslav; Puerto-Giménez, Irene; Teshima, Masahiro

    2015-01-01

    Many atmospheric and climatic criteria have to be taken into account for the selection of a suitable site for the next generation of imaging air-shower Cherenkov telescopes, the "Cherenkov Telescope Array" CTA. Such data are not available with sufficient precision or the comparability to allow for a comprehensive characterization of the proposed sites to be made. Identical cross-calibrated instruments have been developed which allow for precise comparison between sites, the cross-validation of existing data, and the ground-validation of satellite data. The site characterization work package of the CTA consortium opted to construct and deploy 9 copies of an autonomous multi-purpose weather sensor, incorporating an infrared cloud sensor a newly developed sensor for measuring the light of the night sky, and an All-Sky-Camera, the whole referred to as Autonomous Tool for Measuring Observatory Site COnditions PrEcisely (ATMOSCOPE). We present here the hardware that was combined into the ATMOSCOPE and characterize ...

  17. Ultrasonic Characterization of Aerospace Composites

    Science.gov (United States)

    Leckey, Cara; Johnston, Patrick; Haldren, Harold; Perey, Daniel

    2015-01-01

    Composite materials have seen an increased use in aerospace in recent years and it is expected that this trend will continue due to the benefits of reduced weight, increased strength, and other factors. Ongoing work at NASA involves the investigation of the large-scale use of composites for spacecraft structures (SLS components, Orion Composite Crew Module, etc). NASA is also involved in work to enable the use of composites in advanced aircraft structures through the Advanced Composites Project (ACP). In both areas (space and aeronautics) there is a need for new nondestructive evaluation and materials characterization techniques that are appropriate for characterizing composite materials. This paper will present an overview of NASA's needs for characterizing aerospace composites, including a description of planned and ongoing work under ACP for the detection of composite defects such as fiber waviness, reduced bond strength, delamination damage, and microcracking. The research approaches include investigation of angle array, guided wave, and phase sensitive ultrasonic methods. The use of ultrasonic simulation tools for optimizing and developing methods will also be discussed.

  18. Sustainability Characterization for Additive Manufacturing

    Science.gov (United States)

    Mani, Mahesh; Lyons, Kevin W; Gupta, SK

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts. PMID:26601038

  19. Sustainability Characterization for Additive Manufacturing.

    Science.gov (United States)

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.

  20. Components, levels, and opportunities in the five-year review process

    Energy Technology Data Exchange (ETDEWEB)

    Pintenich, J. [Eckenfelder Inc., Nashville, TN (United States). Waste Management Div.

    1996-12-31

    Potentially responsible parties (PRPs) at federal Superfund sites have been burdened with extraordinary expenditures for clean-ups over the past 15 years. Many of these dollars have been spent for the investigation and remedy selection/design/construction process. More recently, however, it has been recognized that the long-term operation and maintenance (O and M) chores of these sites will also weigh heavily upon the economic viability of PRP Companies. Certainly, it is worthwhile to examine the long-term O and M activities and costs at each site to verify that they are all necessary and appropriate. By law, USEPA is required to assess the remedy every five years at some National Priorities List (NPL) sites for which the Record of Decision or ROD was signed after the 1986 Superfund Amendments. This five-year review is a significant opportunity for PRPs to influence their long-term costs. After a brief description of the statutory authority and purpose for the five-year review at NPL sites, this paper describes the levels of review defined by USEPA as well as the components of the review. The Agency`s priorities for this review process are summarized. Recently, both the USEPA Office of Inspector General and the GAO have documented some of the shortcomings of the government`s handling of the five-year reviews, which are summarized herein. Finally and most importantly, this document concludes with a summary of opportunities for PRPs to reduce clean-up costs by participating in the five-year review process.

  1. Characterization system for resonant micro- and nanocantilevers

    DEFF Research Database (Denmark)

    Sandberg, Rasmus Kousholt; Boisen, Anja; Svendsen, Winnie Edith

    2005-01-01

    We present a system for characterization of the resonant properties of micro- and nanocantilever sensors. The system has been constructed as a vacuum chamber with capabilities for controlling environmental conditions such as pressure, temperature, and chemical constituents. Characterization can...

  2. Collector/Receiver Characterization (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2010-08-01

    Fact sheet describing NREL CSP Program capabilities for collector/receiver characterization: determining optical efficiency, measuring heat loss, developing and testing concentrators, concentrating the sun's power, and optically characterizing CSP plants.

  3. Some Characterizations of Mixed Poisson Processes

    CERN Document Server

    Lyberopoulos, D P

    2011-01-01

    A characterization of mixed Poisson processes in terms of disintegrations is proven. As a consequence some further characterizations of such processes via claim interarrival processes, martingales and claim measures are obtained.

  4. Characterizing optimism and pessimism directly though comonotonicity

    NARCIS (Netherlands)

    Wakker, P.

    1990-01-01

    Schmeidler (1982) introduced comonotonic independence to characterize nonadditivity of probabilities. This note obtains natural and very simple characterizations of convexity, concavity (and additivity) of nonadditive probabilities, by relating these directly to the pessimism and optimism inherent

  5. Two Characterizations of Diffeomorphisms of Euclidean Space

    Institute of Scientific and Technical Information of China (English)

    Li Jun YANG; Xian Wu ZENG

    2003-01-01

    Two characterizations for a local diffeomorphism of Rn to be global one are given in termsof associated Wazewski equations. The two characterizations could be useful for the investigation ofthe Jacobian conjecture.

  6. Confirmatory Sampling and Analysis Plan for the Lower East Fork Poplar Creek operable unit, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    On December 21, 1989, the EPA placed the US Department of Energy`s (DOE`s) Oak Ridge Reservation (ORR) on the National Priorities List (NPL). On January 1, 1992, a Federal Facilities Agreement (FFA) between the DOE Field Office in Oak Ridge (DOE-OR), EPA Region IV, and the Tennessee Department of Environment and Conservation (TDEC) went into effect. This FFA establishes the procedural framework and schedule by which DOE-OR will develop, coordinate, implement and monitor environmental restoration activities on the ORR in accordance with applicable federal and state environmental regulations. The DOE-OR Environmental Restoration Program for the ORR addresses the remediation of areas both within and outside the ORR boundaries. This sampling and analysis plan focuses on confirming the cleanup of the stretch of EFPC flowing from Lake Reality at the Y-12 Plant through the City of Oak Ridge, to Poplar Creek on the ORR and its associated floodplain. Both EFPC and its floodplain have been contaminated by releases from the Y-12 Plant since the mid-1950s. Because the EFPC site-designated as an ORR operable unit (OU) under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) is included on the NPL, its remediation must follow the specific procedures mandated by CERCLA, as amended by the Superfund Amendments and Reauthorization Act in 1986.

  7. Characterization of liquid scintillation detectors

    CERN Document Server

    Schmidt, D; Böttger, R; Klein, H; Lebreton, L; Neumann, S; Nolte, R; Pichenot, G

    2002-01-01

    Five scintillation detectors of different scintillator size and type were characterized. The pulse height scale was calibrated in terms of electron light output units using photon sources. The response functions for time-of-flight (TOF)-selected monoenergetic neutrons were experimentally determined and also simulated with the NRESP code over a wide energy range. A comparison of the measured and calculated response functions allows individual characteristics of the detectors to be determined and the response matrix to be reliably derived. Various applications are discussed.

  8. Characterization of photoreceivers for LISA

    Energy Technology Data Exchange (ETDEWEB)

    Cervantes, F Guzman; Livas, J; Silverberg, R; Buchanan, E; Stebbins, R, E-mail: felipe.guzman@nasa.gov [NASA Goddard Space Flight Center, Code 663, 8800 Greenbelt Road, Greenbelt, MD 20771 (United States)

    2011-05-07

    LISA will use quadrant photoreceivers as front-end devices for the phasemeter measuring the motion of drag-free test masses in both angular orientation and separation. We have set up a laboratory testbed for the characterization of photoreceivers. Some of the limiting noise sources have been identified and their contribution has been either measured or derived from the measured data. We have built a photoreceiver with a 0.5 mm diameter quadrant photodiode with an equivalent input current noise of better than 1.8 pA Hz{sup -1/2} below 20 MHz and a 3 dB bandwidth of 34 MHz.

  9. Advanced Fine Particulate Characterization Methods

    Energy Technology Data Exchange (ETDEWEB)

    Steven Benson; Lingbu Kong; Alexander Azenkeng; Jason Laumb; Robert Jensen; Edwin Olson; Jill MacKenzie; A.M. Rokanuzzaman

    2007-01-31

    The characterization and control of emissions from combustion sources are of significant importance in improving local and regional air quality. Such emissions include fine particulate matter, organic carbon compounds, and NO{sub x} and SO{sub 2} gases, along with mercury and other toxic metals. This project involved four activities including Further Development of Analytical Techniques for PM{sub 10} and PM{sub 2.5} Characterization and Source Apportionment and Management, Organic Carbonaceous Particulate and Metal Speciation for Source Apportionment Studies, Quantum Modeling, and High-Potassium Carbon Production with Biomass-Coal Blending. The key accomplishments included the development of improved automated methods to characterize the inorganic and organic components particulate matter. The methods involved the use of scanning electron microscopy and x-ray microanalysis for the inorganic fraction and a combination of extractive methods combined with near-edge x-ray absorption fine structure to characterize the organic fraction. These methods have direction application for source apportionment studies of PM because they provide detailed inorganic analysis along with total organic and elemental carbon (OC/EC) quantification. Quantum modeling using density functional theory (DFT) calculations was used to further elucidate a recently developed mechanistic model for mercury speciation in coal combustion systems and interactions on activated carbon. Reaction energies, enthalpies, free energies and binding energies of Hg species to the prototype molecules were derived from the data obtained in these calculations. Bimolecular rate constants for the various elementary steps in the mechanism have been estimated using the hard-sphere collision theory approximation, and the results seem to indicate that extremely fast kinetics could be involved in these surface reactions. Activated carbon was produced from a blend of lignite coal from the Center Mine in North Dakota and

  10. Characterization of Microporous Insulation, Microsil

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-06-15

    Microsil microporous insulation has been characterized by Lawrence Livermore National Laboratory for possible use in structural and thermal applications in the DPP-1 design. Qualitative test results have provided mechanical behavioral characteristics for DPP-1 design studies and focused on the material behavioral response to being crushed, cyclically loaded, and subjected to vibration for a confined material with an interference fit or a radial gap. Quantitative test results have provided data to support the DPP-1 FEA model analysis and verification and were used to determine mechanical property values for the material under a compression load. The test results are documented within this report.

  11. Adaptive characterization of coherent states

    Energy Technology Data Exchange (ETDEWEB)

    Stenberg, Markku P.V.; Pack, Kevin; Wilhelm, Frank K. [Theoretical Physics, Saarland University, 66123 Saarbruecken (Germany)

    2015-07-01

    We present a method for efficient characterization of an optical coherent state αright angle. We choose measurement setups adaptively based on the data while it is collected. Our algorithm divides the estimation in three different steps with different measurement strategies: (i) searching a crude estimate, (ii) rapidly improving the accuracy, and (iii) the phase where the improvement of the accuracy slows down due to the quantum nature of the coherent state. Our algorithm significantly outperforms nonadaptive schemes. While our standard strategy is robust against measurement errors we also present strategies optimized for the presence of such errors.

  12. Instrumentation for tropospheric aerosol characterization

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Z.; Young, S.E.; Becker, C.H.; Coggiola, M.J. [SRI International, Menlo Park, CA (United States); Wollnik, H. [Giessen Univ. (Germany)

    1997-12-31

    A new instrument has been developed that determines the abundance, size distribution, and chemical composition of tropospheric and lower stratospheric aerosols with diameters down to 0.2 {mu}m. In addition to aerosol characterization, the instrument also monitors the chemical composition of the ambient gas. More than 25.000 aerosol particle mass spectra were recorded during the NASA-sponsored Subsonic Aircraft: Contrail and Cloud Effects Special Study (SUCCESS) field program using NASA`s DC-8 research aircraft. (author) 7 refs.

  13. Neutron Characterization for Additive Manufacturing

    Science.gov (United States)

    Watkins, Thomas; Bilheux, Hassina; An, Ke; Payzant, Andrew; DeHoff, Ryan; Duty, Chad; Peter, William; Blue, Craig; Brice, Craig A.

    2013-01-01

    Oak Ridge National Laboratory (ORNL) is leveraging decades of experience in neutron characterization of advanced materials together with resources such as the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR) shown in Fig. 1 to solve challenging problems in additive manufacturing (AM). Additive manufacturing, or three-dimensional (3-D) printing, is a rapidly maturing technology wherein components are built by selectively adding feedstock material at locations specified by a computer model. The majority of these technologies use thermally driven phase change mechanisms to convert the feedstock into functioning material. As the molten material cools and solidifies, the component is subjected to significant thermal gradients, generating significant internal stresses throughout the part (Fig. 2). As layers are added, inherent residual stresses cause warping and distortions that lead to geometrical differences between the final part and the original computer generated design. This effect also limits geometries that can be fabricated using AM, such as thin-walled, high-aspect- ratio, and overhanging structures. Distortion may be minimized by intelligent toolpath planning or strategic placement of support structures, but these approaches are not well understood and often "Edisonian" in nature. Residual stresses can also impact component performance during operation. For example, in a thermally cycled environment such as a high-pressure turbine engine, residual stresses can cause components to distort unpredictably. Different thermal treatments on as-fabricated AM components have been used to minimize residual stress, but components still retain a nonhomogeneous stress state and/or demonstrate a relaxation-derived geometric distortion. Industry, federal laboratory, and university collaboration is needed to address these challenges and enable the U.S. to compete in the global market. Work is currently being conducted on AM technologies at the ORNL

  14. Normative Characterization in Empirical Explanation

    Directory of Open Access Journals (Sweden)

    Mark Bauer

    2015-06-01

    Full Text Available Normative characterization is a commonplace feature of biological and cognitive explanation. Such language seems to commit the biological and cognitive sciences to the existence of natural norms, but it is also difficult to understand how such normativity fits into a natural world of physical causes and forces. Existing models for how such language can have a legitimate causal-explanatory role in the sciences are, I think, unsatisfactory.  I suggest an alternative model in which normativity is mapped onto systems stabilized by counteractive constraints. Such a mapping, I propose, explains normativity’s causal-explanatory role in biological and cognitive inquiry. 

  15. 10 CFR 63.15 - Site characterization.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Site characterization. 63.15 Section 63.15 Energy NUCLEAR... MOUNTAIN, NEVADA Licenses Preapplication Review § 63.15 Site characterization. (a) DOE shall conduct a program of site characterization with respect to the Yucca Mountain site before it submits an...

  16. The Rings Characterized by Minimal Left Ideals

    Institute of Scientific and Technical Information of China (English)

    Jun Chao WEI

    2005-01-01

    We study these rings with every minimal left ideal being a projective, direct summand and a p-injective module, respectively. Some characterizations of these rings are given, and the relations among them are obtained. With these rings, we characterize semisimple rings. Finally, we introduce MC2 rings, and give some characterizations of MC2 rings.

  17. 10 CFR 60.15 - Site characterization.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Site characterization. 60.15 Section 60.15 Energy NUCLEAR... Preapplication Review § 60.15 Site characterization. (a) Prior to submittal of an application for a license to be issued under this part DOE shall conduct a program of site characterization with respect to the site...

  18. BNFL Report Glass Formers Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Schumacher, R.F.

    2000-07-27

    The objective of this task was to obtain powder property data on candidate glass former materials, sufficient to guide conceptual design and estimate the cost of glass former handling facilities as requested under Part B1 of BNFL Technical and Development Support. Twenty-nine glass forming materials were selected and obtained from vendors for the characterization of their physical properties, durability in caustic solution, and powder flow characteristics. A glass former was selected based on the characterization for each of the ten oxide classes required for Envelope A, B, and C mixtures. Three blends (A, B, and C) were prepared based on formulations provided by Vitreous State Laboratory and evaluated with the same methods employed for the glass formers. The properties obtained are presented in a series of attached Tables. It was determined that five of the ten glass formers, (kyanite, iron oxide, titania, zircon, and zinc oxide) have the potential to cause some level of solids f low problems. The problems might include arching or ratholing in the silo/hopper. In addition, all of the blends may require consideration for their handling.

  19. Landscape characterization for watershed management

    Energy Technology Data Exchange (ETDEWEB)

    Hunsaker, C.T.; Jackson, B.L. [Oak Ridge National Lab., TN (United States); Schwartz, P.M. [Oak Ridge Institute for Science Education, Oak Ridge, TN (United States)

    1996-07-01

    Streams and rivers serve as integrators of terrestrial landscape characteristics and as recipients of pollutants from both the atmosphere and the land; thus, large rivers are especially good indicators of cumulative impacts. Landscape ecologists seek to better understand the relationships between landscape structure and ecosystem processes at various spatial scales. Understanding how scale, both data resolution and geographic extent, influences landscape characterization and how terrestrial processes affect water quality are critically important for model development and translation of research results from experimental watersheds to management of large drainage basins. Measures of landscape structure are useful to monitor change and assess the risks it poses to ecological resources. Many studies have shown that the proportion of different land uses within a watershed can account for some of the variability in surface water quality. Hunsaker and Levine showed that both proportion of land uses and the spatial pattern of land uses is important for characterizing and modeling water quality; however, proportion consistently accounted for the most variance (40% to 86%) across a range of watershed sizes (1000 to 1.35 million ha). The U.S. Environmental Protection Agency (EPA) is performing a demonstration of its Environmental Monitoring and Assessment Program (EMAP) for the Mid-Atlantic Region. One activity, the Mid-Atlantic Integrated Assessment, is designed as a collaborative initiative between EPA`s Office of Research and Development and EPA`s Region III.

  20. BNFL Report Glass Formers Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Schumacher, R.F.

    2000-07-27

    The objective of this task was to obtain powder property data on candidate glass former materials, sufficient to guide conceptual design and estimate the cost of glass former handling facilities as requested under Part B1 of BNFL Technical and Development Support. Twenty-nine glass forming materials were selected and obtained from vendors for the characterization of their physical properties, durability in caustic solution, and powder flow characteristics. A glass former was selected based on the characterization for each of the ten oxide classes required for Envelope A, B, and C mixtures. Three blends (A, B, and C) were prepared based on formulations provided by Vitreous State Laboratory and evaluated with the same methods employed for the glass formers. The properties obtained are presented in a series of attached Tables. It was determined that five of the ten glass formers, (kyanite, iron oxide, titania, zircon, and zinc oxide) have the potential to cause some level of solids f low problems. In addition, all of the blends may require consideration for their handling. A number of engineering considerations and recommendations were prepared based on the experimental findings, experience, and other process considerations. Recommendations for future testing are included. In conjunction with future work, it is recommended that a professional consultant be engaged to guide and assist with testing and design input.

  1. BNFL Report Glass Formers Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Schumacher, R.F.

    2000-07-27

    The objective of this task was to obtain powder property data on candidate glass former materials, sufficient to guide conceptual design and estimate the cost of glass former handling facilities as requested under Part B1 of BNFL Technical and Development Support. Twenty-nine glass forming materials were selected and obtained from vendors for the characterization of their physical properties, durability in caustic solution, and powder flow characteristics. A glass former was selected based on the characterization for each of the ten oxide classes required for Envelope A, B, and C mixtures. Three blends (A, B, and C) were prepared based on formulations provided by Vitreous State Laboratory and evaluated with the same methods employed for the glass formers. The properties obtained are presented in a series of attached Tables. It was determined that five of the ten glass formers, (kyanite, iron oxide, titania, zircon, and zinc oxide) have the potential to cause some level of solids f low problems. In addition, all of the blends may require consideration for their handling. A number of engineering considerations and recommendations were prepared based on the experimental findings, experience, and other process considerations. Recommendations for future testing are included. In conjunction with future work, it is recommended that a professional consultant be engaged to guide and assist with testing and design input.

  2. Historical characterization of trigeminal neuralgia.

    Science.gov (United States)

    Eboli, Paula; Stone, James L; Aydin, Sabri; Slavin, Konstantin V

    2009-06-01

    TRIGEMINAL NEURALGIA IS a well known clinical entity characterized by agonizing, paroxysmal, and lancinating facial pain, often triggered by movements of the mouth or eating. Historical reviews of facial pain have attempted to describe this severe pain over the past 2.5 millennia. The ancient Greek physicians Hippocrates, Aretaeus, and Galen, described kephalalgias, but their accounts were vague and did not clearly correspond with what we now term trigeminal neuralgia. The first adequate description of trigeminal neuralgia was given in 1671, followed by a fuller description by physician John Locke in 1677. André described the convulsive-like condition in 1756, and named it tic douloureux; in 1773, Fothergill described it as "a painful affection of the face;" and in 1779, John Hunter more clearly characterized the entity as a form of "nervous disorder" with reference to pain of the teeth, gums, or tongue where the disease "does not reside." One hundred fifty years later, the neurological surgeon Walter Dandy equated neurovascular compression of the trigeminal nerve with trigeminal neuralgia.

  3. Quantitative Characterization of Nanostructured Materials

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Frank (Bud) Bridges, University of California-Santa Cruz

    2010-08-05

    The two-and-a-half day symposium on the "Quantitative Characterization of Nanostructured Materials" will be the first comprehensive meeting on this topic held under the auspices of a major U.S. professional society. Spring MRS Meetings provide a natural venue for this symposium as they attract a broad audience of researchers that represents a cross-section of the state-of-the-art regarding synthesis, structure-property relations, and applications of nanostructured materials. Close interactions among the experts in local structure measurements and materials researchers will help both to identify measurement needs pertinent to real-world materials problems and to familiarize the materials research community with the state-of-the-art local structure measurement techniques. We have chosen invited speakers that reflect the multidisciplinary and international nature of this topic and the need to continually nurture productive interfaces among university, government and industrial laboratories. The intent of the symposium is to provide an interdisciplinary forum for discussion and exchange of ideas on the recent progress in quantitative characterization of structural order in nanomaterials using different experimental techniques and theory. The symposium is expected to facilitate discussions on optimal approaches for determining atomic structure at the nanoscale using combined inputs from multiple measurement techniques.

  4. Characterization of Polymeric Nanofiltration Membranes

    Directory of Open Access Journals (Sweden)

    Simoncic, B.

    2007-11-01

    Full Text Available As membrane processes are increasingly used in industrial applications, there is a growing interest in methods of membrane characterization. Traditional membrane characteristics, such as cut-off value and pore size distribution, are being supplemented by membrane surface characteristics, such as charge density or zeta potential and hydrophobicity. This study, therefore, characterizes the three different polymeric membranes used (NFT-50, DL and DK. The molecular mass cut-off (MMCO value was determined using a set of reference solutes within the molecular range 150-600 Da, whereas streaming potential measurements enabled quantification of the surface charge characteristics. Hydrophobicity was studied using contact angle measurements. The results indicated that even though all three membranes had very similar layer compositions which consisted of poly(piperazneamide, as top layers they showed different values of measured quantitive. The NFT-50 membrane had the lowest MMCO value and the most hydrophilic membrane surface, followed by DK and DL. Membrane fouling as measured by flux reduction was determined by streaming potential measurements and accompanied by a positive change in zeta potential.

  5. Characterization of minerals, metals and materials

    CERN Document Server

    Hwang, Jiann-Yang; Bai, Chengguang; Carpenter, John; Cai, Mingdong; Firrao, Donato; Kim, Byoung-Gon

    2012-01-01

    This state-of-the-art reference contains chapters on all aspects of the characterization of minerals, metals, and materials. The title presents papers from one of the largest yearly gatherings of materials scientists in the world and thoroughly discusses the characterization of minerals, metals, and materials The scope includes current industrial applications and research and developments in the following areas:  Characterization of Ferrous Metals Characterization of Non-Ferrous Materials Characterization of Minerals and Ceramics Character

  6. Advanced methods for bioreactor characterization.

    Science.gov (United States)

    Lübbert, A

    1992-08-01

    Bioreactors are characterized by the transport capacities they provide to optimally supply the microorganisms during production process. The transport is performed by flows induced in their cultivation media. In order to understand the extremely complex mixing, mass and heat transfer phenomena encountered, and to perceive their influences on bioreactor performance, sophisticated measuring techniques are required. This review compiles the developments currently in progress to surmount today's shortage of reliable measuring techniques. Measuring techniques are distinguished which can be used on different scales and their application spectra are illustrated by recently obtained results. Several new measuring techniques, which can be employed to resolve the flow structures, are discussed in detail. Only those techniques are considered which can be used to advantage during real cultivations in industrial-scale reactors.

  7. Surface characterization of silicate bioceramics.

    Science.gov (United States)

    Cerruti, Marta

    2012-03-28

    The success of an implanted prosthetic material is determined by the early events occurring at the interface between the material and the body. These events depend on many surface properties, with the main ones including the surface's composition, porosity, roughness, topography, charge, functional groups and exposed area. This review will portray how our understanding of the surface reactivity of silicate bioceramics has emerged and evolved in the past four decades, owing to the adoption of many complementary surface characterization tools. The review is organized in sections dedicated to a specific surface property, each describing how the property influences the body's response to the material, and the tools that have been adopted to analyse it. The final section introduces the techniques that have yet to be applied extensively to silicate bioceramics, and the information that they could provide.

  8. Photovoltaics characterization: Beyond the horizon

    Science.gov (United States)

    Kazmerski, Lawrence L.

    1997-04-01

    This paper examines current photovoltaic test, measurement, and characterization techniques and makes evaluations and predictions of the next-generation technologies needed to meet the evolving requirements of photovoltaics. The range of support and research areas, from array through atomic-level analysis, are cited. The specific requirements of research and manufacturing sectors are addressed, including the need for more rapid response, new and photovoltaic-specific measurement techniques, manufacturing-environment measurement capabilities, and electronic-based centralized facilities. The integration and cohesion of analytical services with the evolving capabilities of the information highway are discussed and anticipated. To ensure the security of both intellectual and product property, the increased demands of protection of data are emphasized. Trends toward greater accuracy, precision, smaller- and larger-area analysis, and more-versatile measurement technologies are discussed.

  9. Characterization of Corneal Indentation Hysteresis.

    Science.gov (United States)

    Ko, Match W L; Dongming Wei; Leung, Christopher K S

    2015-01-01

    Corneal indentation is adapted for the design and development of a characterization method for corneal hysteresis behavior - Corneal Indentation Hysteresis (CIH). Fourteen porcine eyes were tested using the corneal indentation method. The CIH measured in enucleated porcine eyes showed indentation rate and intraocular pressure (IOP) dependences. The CIH increased with indentation rate at lower IOP ( 25 mmHg). The CIH was linear proportional to the IOP within an individual eye. The CIH was positively correlated with the IOP, corneal in-plane tensile stress and corneal tangent modulus (E). A new method based on corneal indentation for the measurement of Corneal Indentation Hysteresis in vivo is developed. To our knowledge, this is the first study to introduce the corneal indentation hysteresis and correlate the corneal indentation hysteresis and corneal tangent modulus.

  10. Heparin Characterization: Challenges and Solutions

    Science.gov (United States)

    Jones, Christopher J.; Beni, Szabolcs; Limtiaco, John F. K.; Langeslay, Derek J.; Larive, Cynthia K.

    2011-07-01

    Although heparin is an important and widely prescribed pharmaceutical anticoagulant, its high degree of sequence microheterogeneity and size polydispersity make molecular-level characterization challenging. Unlike nucleic acids and proteins that are biosynthesized through template-driven assembly processes, heparin and the related glycosaminoglycan heparan sulfate are actively remodeled during biosynthesis through a series of enzymatic reactions that lead to variable levels of O- and N-sulfonation and uronic acid epimers. As summarized in this review, heparin sequence information is determined through a bottom-up approach that relies on depolymerization reactions, size- and charge-based separations, and sensitive mass spectrometric and nuclear magnetic resonance experiments to determine the structural identity of component oligosaccharides. The structure-elucidation process, along with its challenges and opportunities for future analytical improvements, is reviewed and illustrated for a heparin-derived hexasaccharide.

  11. Characterization of DPOAE fine structure

    DEFF Research Database (Denmark)

    Reuter, Karen; Hammershøi, Dorte

    2005-01-01

    , and has recently been demonstrated to exist in low level equal-loudness contours. The character of the DPOAE fine structure depends on several parameters, i.e., level, frequencies, and frequency of the two primaries, but also level and character of the noise floor. The prevalence and character of the fine......The distortion product otoacoustic emission (DPOAE) fine structure is revealed, when measuring DPOAE with a very fine frequency resolution. It is characterized by consistent maxima and minima with notches of up to 20 dB depth. The fine structure is known also from absolute hearing thresholds...... structures are highly individual, and till now no standardized method has been suggested for a consistent categorization. In the present paper a method developed for the categorization of fine structures is presented. The method has been used in two previous studies on the prevalence of fine structures, 1...

  12. Aerosol Inlet Characterization Experiment Report

    Energy Technology Data Exchange (ETDEWEB)

    Bullard, Robert L. [Brookhaven National Lab. (BNL), Upton, NY (United States); Kuang, Chongai [Brookhaven National Lab. (BNL), Upton, NY (United States); Uin, Janek [Brookhaven National Lab. (BNL), Upton, NY (United States); Smith, Scott [Brookhaven National Lab. (BNL), Upton, NY (United States); Springston, Stephen R. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2017-05-01

    The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Climate Research Facility Aerosol Observation System inlet stack was characterized for particle penetration efficiency from 10 nm to 20 μm in diameter using duplicate scanning mobility particle sizers (10 nm-450 nm), ultra-high-sensitivity aerosol spectrometers (60 nm-μm), and aerodynamic particle sizers (0.5 μm-20 μm). Results show good model-measurement agreement and unit transmission efficiency of aerosols from 10 nm to 4 μm in diameter. Large uncertainties in the measured transmission efficiency exist above 4 μm due to low ambient aerosol signal in that size range.

  13. Structural characterization of electrodeposited boron

    Indian Academy of Sciences (India)

    Ashish Jain; C Ghosh; T R Ravindran; S Anthonysamy; R Divakar; E Mohandas; G S Gupta

    2013-12-01

    Structural characterization of electrodeposited boron was carried out by using transmission electron microscopy and Raman spectroscopy. Electron diffraction and phase contrast imaging were carried out by using transmission electron microscopy. Phase identification was done based on the analysis of electron diffraction patterns and the power spectrum calculated from the lattice images from thin regions of the sample. Raman spectroscopic examination was carried out to study the nature of bonding and the allotropic form of boron obtained after electrodeposition. The results obtained from transmission electron microscopy showed the presence of nanocrystallites embedded in an amorphous mass of boron. Raman microscopic studies showed that amorphous boron could be converted to its crystalline form at high temperatures.

  14. Characterizing and modeling citation dynamics

    CERN Document Server

    Eom, Young-Ho; 10.1371/journal.pone.0024926

    2011-01-01

    Citation distributions are crucial for the analysis and modeling of the activity of scientists. We investigated bibliometric data of papers published in journals of the American Physical Society, searching for the type of function which best describes the observed citation distributions. We used the goodness of fit with Kolmogorov-Smirnov statistics for three classes of functions: log-normal, simple power law and shifted power law. The shifted power law turns out to be the most reliable hypothesis for all citation networks we derived, which correspond to different time spans. We find that citation dynamics is characterized by bursts, usually occurring within a few years since publication of a paper, and the burst size spans several orders of magnitude. We also investigated the microscopic mechanisms for the evolution of citation networks, by proposing a linear preferential attachment with time dependent initial attractiveness. The model successfully reproduces the empirical citation distributions and accounts...

  15. Photoluminescence Characterization of NASICON Material

    Institute of Scientific and Technical Information of China (English)

    Yuehua He; Baofu Quan; Ying Wang; Chuanhui Cheng; Fengmin Liu; Biao Wang

    2006-01-01

    Besides gas sensitivity, NASICON (Na super ion conductor) material has luminescence characterization. In this paper, the photoluminescence properties of NASICON and doped-NASICON material are investigated. The NASICON material was synthesized by conventional sol-gel process, and doped with Er2O3, Tm2O3, Dy2O3, CsCl by 1%, 3%, 5% (mass ratio), respectively. The ultraviolet light (325 nm, He-Cd laser) excited luminescent emissions of the resulted powders are recorded vs. wavelength in the 330 nm to 650 nm range. The main peak of the pure NASICON is found at the wavelength of 474 nm (blue light), the transition energy is 2.616 eV. The luminescent intensity is weakened obviously after doping with Er2O3 and Tm2O3, but is increased after doping with Dy2O3 and 3% CsCl.

  16. Synthesis and characterization of Taurine

    Directory of Open Access Journals (Sweden)

    B Bayarmaa

    2014-10-01

    Full Text Available Have been obtained 2-aminoethanesulfonic acid (taurine from ethanolamine, sulfuric acid and sodium sulfite during the synthesis in laboratory condition. The process involves two steps of reactions, the first was esterification of ethanolamine with sulfuric acid to produce the intermediate product of 2-aminoethyl ester which than was extended to the second step by sulfonation with sodium sulfite to produce 2-aminoethanesulfonic acid. Resulting product was analyzed using 1H-NMR, IR, FAB-MS analysis and examined purity characterizations of the synthesized products. DOI: http://dx.doi.org/10.5564/mjc.v14i0.200 Mongolian Journal of Chemistry 14 (40, 2013, p57-60

  17. Entropic characterization of quantum operations

    CERN Document Server

    Roga, Wojciech; Zyczkowski, Karol

    2011-01-01

    We investigate decoherence induced by a quantum channel in terms of minimal output entropy and of map entropy. The latter is the von Neumann entropy of the Jamiolkowski state of the channel. Both quantities admit q-Renyi versions. We prove additivity of the map entropy for all q. For the case q = 2, we show that the depolarizing channel has the smallest map entropy among all channels with a given minimal output Renyi entropy of order two. This allows us to characterize pairs of channels such that the output entropy of their tensor product acting on a maximally entangled input state is larger than the sum of the minimal output entropies of the individual channels. We conjecture that for any channel {\\Phi}1 acting on a finite dimensional system there exists a class of channels {\\Phi}2 sufficiently close to a unitary map such that additivity of minimal output entropy for {\\Psi}1 x {\\Psi}2 holds.

  18. Characterization of diacetone diperoxide (DADP)

    Science.gov (United States)

    Bowden, Patrick R.; Tappan, Bryce C.; Manner, Virginia W.; Preston, Daniel N.; Scott, Brian L.

    2017-01-01

    To date, diacetone diperoxide (DADP) has been significantly less studied than its well-known counterpart, triacetone triperoxide (TATP). Much of this disparity in the literature is due to the harsher conditions/multi-step syntheses required to obtain DADP leading to much lower evidence of frequency of use. Because of this, DADP is often misrepresented as being more dangerous (i.e. more sensitive and less stable) than TATP. This paper discusses the synthesis and characterization (sensitivity, thermal stability, etc.) of DADP with comparisons to other energetic organic peroxides (TATP, HMTD and MEKP) and differences in polymorphism, crystal habit and effects of aging and processing differences are discussed. Additionally, the deflagration-to-detonation transition (DDT) behavior of DADP is discussed with comparison to TATP.

  19. Single Cell Electrical Characterization Techniques.

    Science.gov (United States)

    Mansor, Muhammad Asraf; Ahmad, Mohd Ridzuan

    2015-06-04

    Electrical properties of living cells have been proven to play significant roles in understanding of various biological activities including disease progression both at the cellular and molecular levels. Since two decades ago, many researchers have developed tools to analyze the cell's electrical states especially in single cell analysis (SCA). In depth analysis and more fully described activities of cell differentiation and cancer can only be accomplished with single cell analysis. This growing interest was supported by the emergence of various microfluidic techniques to fulfill high precisions screening, reduced equipment cost and low analysis time for characterization of the single cell's electrical properties, as compared to classical bulky technique. This paper presents a historical review of single cell electrical properties analysis development from classical techniques to recent advances in microfluidic techniques. Technical details of the different microfluidic techniques are highlighted, and the advantages and limitations of various microfluidic devices are discussed.

  20. Single Cell Electrical Characterization Techniques

    Directory of Open Access Journals (Sweden)

    Muhammad Asraf Mansor

    2015-06-01

    Full Text Available Electrical properties of living cells have been proven to play significant roles in understanding of various biological activities including disease progression both at the cellular and molecular levels. Since two decades ago, many researchers have developed tools to analyze the cell’s electrical states especially in single cell analysis (SCA. In depth analysis and more fully described activities of cell differentiation and cancer can only be accomplished with single cell analysis. This growing interest was supported by the emergence of various microfluidic techniques to fulfill high precisions screening, reduced equipment cost and low analysis time for characterization of the single cell’s electrical properties, as compared to classical bulky technique. This paper presents a historical review of single cell electrical properties analysis development from classical techniques to recent advances in microfluidic techniques. Technical details of the different microfluidic techniques are highlighted, and the advantages and limitations of various microfluidic devices are discussed.

  1. Synthesis and Characterization of Multithiouracils

    Institute of Scientific and Technical Information of China (English)

    WANG Wei; LIU Hui-Min; ZHANG Wei; ZHANG Wen-Qin

    2003-01-01

    @@ Alkylation of bases group of nucleic acid, thymine and uracil, has attracted great attention. In order to investigate the intermolecular interactions, [1,2] and the photoreactions[3,4] between bases group of nucleic acid, many studies were focused on the synthesis of bisbases in the formation of B-(CH2)n-B (B′) in which trimethylene was commonly used as linker. Thiouracil is an important derivative of nucleic acid bases, and it can interfere with the synthesis of thyroxine, especially in the treatment of hyperthyroidism and angina. However, to our knowledge, the synthesis of bisthiouracils, even trithiouracils, using flexible or rigid linkers has not been reported. Herein, we have synthesized eight thiouracil derivatives by nucleophilic reaction between thiouracil and varied bromides. All the compounds have been characterized by IR, 1H NMR and element analysis.

  2. FIRAS wire grid characterization techniques

    Science.gov (United States)

    Barney, Richard D.; Magner, Thomas J.

    1989-01-01

    Characterization techniques used to verify the quality and spectral performance of the large freestanding wire grid polarizing beamsplitters and input/output polarizers used in the Far Infrared Absolute Spectrophotometer (FIRAS) are presented. The clear aperture of these grids is lined with 20.8 micron diameter gold coated tungsten wire, spaced 33 microns apart. The grid characteristics measured throughout fabrication and space flight qualification are the center to center wire spacing and wire plane flatness. Ideally, the wire grids should produce coherent wavefronts with equal reflectance and transmittance properties. When the spacing is inconsistent, these wavefront intensities are unequal, thus decreasing the efficiency of the grids and reducing the output signal of the FIRAS. The magnitude of the output interferogram is also reduced by incoherence in the interfering wave fronts caused by uneven flatness.

  3. Hydraulic characterization of " Furcraea andina

    Science.gov (United States)

    Rivera-Velasquez, M. F.; Fallico, C.; Molinari, A.; Santillan, P.; Salazar, M.

    2012-04-01

    The present level of pollution, increasingly involving groundwaters, constitutes a serious risk for environment and human health. Therefore the remediation of saturated and unsaturated soils, removing pollutant materials through innovative and economic bio-remediation techniques is more frequently required. Recent studies on natural fiber development have shown the effectiveness of these fibers for removal of some heavy metals, due to the lignin content in the natural fibers which plays an important role in the adsorption of metal cations (Lee et al., 2004; Troisi et al., 2008; C. Fallico, 2010). In the context of remediation techniques for unsaturated and/or saturated zone, an experimental approach for the hydraulic characterization of the "Furcraea andina" (i.e., Cabuya Blanca) fiber was carried out. This fiber is native to Andean regions and grows easily in wild or cultivated form in the valleys and hillsides of Colombia, Ecuador, and Peru. Fibers of "Furcraea andina" were characterized by experimental tests to determine their hydraulic conductivity or permeability and porosity in order to use this medium for bioremediation of contaminated aquifer exploiting the physical, chemical and microbial capacity of natural fiber in heavy metal adsorption. To evaluate empirically the hydraulic conductivity, laboratory tests were carried out at constant head specifically on the fibers manually extracted. For these tests we used a flow cell (used as permeameter), containing the "Furcraea andina" fibers to be characterized, suitably connected by a tygon pipe to a Marriott's bottle, which had a plastic tube that allow the adjustment of the hydraulic head for different tests to a constant value. By this experiment it was also possible to identify relationships that enable the estimation of permeability as a function of density, i.e. of the compaction degree of the fibers. Our study was carried out for three values of hydraulic head (H), namely 10, 18, and 25 cm and for each

  4. Characterizing stellar and exoplanetary environments

    CERN Document Server

    Khodachenko, Maxim

    2015-01-01

    In this book an international group of specialists discusses studies of exoplanets subjected to extreme stellar radiation and plasma conditions. It is shown that such studies will help us to understand how terrestrial planets and their atmospheres, including the early Venus, Earth and Mars, evolved during the host star’s active early phase. The book presents an analysis of findings from Hubble Space Telescope observations of transiting exoplanets, as well as applications of advanced numerical models for characterizing the upper atmosphere structure and stellar environments of exoplanets. The authors also address detections of atoms and molecules in the atmosphere of “hot Jupiters” by NASA’s Spitzer telescope. The observational and theoretical investigations and discoveries presented are both timely and important in the context of the next generation of space telescopes. 
 The book is divided into four main parts, grouping chapters on exoplanet host star radiation and plasma environments, exoplanet u...

  5. Poverty: socioeconomic characterization at tuberculosis.

    Science.gov (United States)

    Geraldes Santos, Maria de Lourdes Sperli; Figueiredo Vendramini, Silvia Helena; Gazetta, Claudia Eli; Cruz Oliveira, Sonia Aparecida; Scatena Villa, Tereza Cristina

    2007-01-01

    This study aimed to evaluate the epidemiological status of Tuberculosis regarding to the socioeconomic characteristics of São José do Rio Preto between 1998 and 2004. Indexes estimated for 432 urban census tracts from the demographic census of 2000, sorted systematically according to the values of socioeconomic factors and grouped into quartiles were taken into account. The socioeconomic characterization was outlined based on Schooling, Income, and Number of Residents. The incidence rates were considered for 1998, 1999, 2003, and 2004. The socioeconomic factor accounted for 87% of the total variation. The disease prevalence is higher in the poorest areas. The incidence rate and the risk of being infected by TB in the poorest areas declined in 2003 and 2004. The results confirm that TB is determined by the population's living conditions in the city studied. It strengthens the relevance of understanding the TB conditional social factors to transform the worrisome scenario in which this population is inserted.

  6. Relation among C-curve characterization diagrams

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    As three control points are fixed and the fourth control point varies, the planar cubic C-curve may take on a loop, a cusp, or zero to two inflection points, depending on the position of the moving point. The plane can, therefore, be partitioned into regions labelled according to the characterization of the curve when the fourth point is in each region. This partitioned plane is called a "characterization diagram". By moving one of the control points but fixing the rest, one can induce different characterization diagrams. In this paper, we investigate the relation among all different characterization diagrams of cubic C-curves based on the singularity conditions proposed by Yang and Wang (2004). We conclude that, no matter what the C-curve type is or which control point varies, the characterization diagrams can be obtained by cutting a common 3D characterization space with a corresponding plane.

  7. SpinSat Mission Ground Truth Characterization

    Science.gov (United States)

    2014-09-01

    SpinSat Mission Ground Truth Characterization Andrew Nicholas, Ted Finne, Ivan Galysh, Anthony Mai, Jim Yen Naval Research Laboratory, Washington...mission overview, ground truth characterization and unique SSA observation opportunities of the mission. 1. MISSION CONCEPT The Naval Research...2. REPORT TYPE 3. DATES COVERED 00-00-2014 to 00-00-2014 4. TITLE AND SUBTITLE SpinSat Mission Ground Truth Characterization 5a. CONTRACT

  8. Natural phenomena hazards site characterization criteria

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The criteria and recommendations in this standard shall apply to site characterization for the purpose of mitigating Natural Phenomena Hazards (wind, floods, landslide, earthquake, volcano, etc.) in all DOE facilities covered by DOE Order 5480.28. Criteria for site characterization not related to NPH are not included unless necessary for clarification. General and detailed site characterization requirements are provided in areas of meteorology, hydrology, geology, seismology, and geotechnical studies.

  9. High-G Thermal Characterization Centrifuge

    Data.gov (United States)

    Federal Laboratory Consortium — High-G testing of thermal components enables improved understanding of operating behavior under military-relevant environments. The High-G Thermal Characterization...

  10. High-G Thermal Characterization Centrifuge

    Data.gov (United States)

    Federal Laboratory Consortium — High-G testing of thermal components enables improved understanding of operating behavior under military-relevant environments. The High-G Thermal Characterization...

  11. Machine learning methods for nanolaser characterization

    CERN Document Server

    Zibar, Darko; Winther, Ole; Moerk, Jesper; Schaeffer, Christian

    2016-01-01

    Nanocavity lasers, which are an integral part of an on-chip integrated photonic network, are setting stringent requirements on the sensitivity of the techniques used to characterize the laser performance. Current characterization tools cannot provide detailed knowledge about nanolaser noise and dynamics. In this progress article, we will present tools and concepts from the Bayesian machine learning and digital coherent detection that offer novel approaches for highly-sensitive laser noise characterization and inference of laser dynamics. The goal of the paper is to trigger new research directions that combine the fields of machine learning and nanophotonics for characterizing nanolasers and eventually integrated photonic networks

  12. Characterization of Vanadium Flow Battery

    DEFF Research Database (Denmark)

    Bindner, Henrik W.; Krog Ekman, Claus; Gehrke, Oliver;

    of wind energy in the Danish power system. The battery has been in operation for 18 months. During time of operation the battery has not shown signs of degradation of performance. It has a round-trip efficiency at full load of approximately 60% (depending on temperature and SOC). The sources of the losses......This report summarizes the work done at Risø-DTU testing a vanadium flow battery as part of the project “Characterisation of Vanadium Batteries” (ForskEl project 6555) with the partners PA Energy A/S and OI Electric A/S under the Danish PSO energy research program. A 15kW/120kWh vanadium battery...... has been installed as part of the distributed energy systems experimental facility, SYSLAB, at Risø DTU. A test programme has been carried out to get hands-on experience with the technology, to characterize the battery from a power system point of view and to assess it with respect to integration...

  13. Characterization of vanadium flow battery

    Energy Technology Data Exchange (ETDEWEB)

    Bindner, H.; Ekman, C.; Gehrke, O.; Isleifsson, F.

    2010-10-15

    This report summarizes the work done at Risoe DTU testing a vanadium flow battery as part of the project 'Characterisation of Vanadium Batteries' (ForskEl project 6555) with the partners PA Energy A/S and OI Electric A/S under the Danish PSO energy research program. A 15kW/120kWh vanadium battery has been installed as part of the distributed energy systems experimental facility, SYSLAB, at Risoe DTU. A test programme has been carried out to get hands-on experience with the technology, to characterize the battery from a power system point of view and to assess it with respect to integration of wind energy in the Danish power system. The battery has been in operation for 18 months. During time of operation the battery has not shown signs of degradation of performance. It has a round-trip efficiency at full load of approximately 60% (depending on temperature and SOC). The sources of the losses are power conversion in cell stacks/electrolyte, power converter, and auxiliary power consumption from pumps and controller. The response time for the battery is limited at 20kW/s by the ramp rate of the power converter. The battery can thus provide power and frequency support for the power system. Vanadium battery is a potential technology for storage based services to the power system provided investment and O and M cost are low enough and long term operation is documented. (Author)

  14. Multilayer Piezoelectric Stack Actuator Characterization

    Science.gov (United States)

    Sherrit, Stewart; Jones, Christopher M.; Aldrich, Jack B.; Blodget, Chad; Bao, Xioaqi; Badescu, Mircea; Bar-Cohen, Yoseph

    2008-01-01

    Future NASA missions are increasingly seeking to use actuators for precision positioning to accuracies of the order of fractions of a nanometer. For this purpose, multilayer piezoelectric stacks are being considered as actuators for driving these precision mechanisms. In this study, sets of commercial PZT stacks were tested in various AC and DC conditions at both nominal and extreme temperatures and voltages. AC signal testing included impedance, capacitance and dielectric loss factor of each actuator as a function of the small-signal driving sinusoidal frequency, and the ambient temperature. DC signal testing includes leakage current and displacement as a function of the applied DC voltage. The applied DC voltage was increased to over eight times the manufacturers' specifications to investigate the correlation between leakage current and breakdown voltage. Resonance characterization as a function of temperature was done over a temperature range of -180C to +200C which generally exceeded the manufacturers' specifications. In order to study the lifetime performance of these stacks, five actuators from one manufacturer were driven by a 60volt, 2 kHz sine-wave for ten billion cycles. The tests were performed using a Lab-View controlled automated data acquisition system that monitored the waveform of the stack electrical current and voltage. The measurements included the displacement, impedance, capacitance and leakage current and the analysis of the experimental results will be presented.

  15. Laboratory characterization of rock joints

    Energy Technology Data Exchange (ETDEWEB)

    Hsiung, S.M.; Kana, D.D.; Ahola, M.P.; Chowdhury, A.H.; Ghosh, A. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

    1994-05-01

    A laboratory characterization of the Apache Leap tuff joints under cyclic pseudostatic and dynamic loads has been undertaken to obtain a better understanding of dynamic joint shear behavior and to generate a complete data set that can be used for validation of existing rock-joint models. Study has indicated that available methods for determining joint roughness coefficient (JRC) significantly underestimate the roughness coefficient of the Apache Leap tuff joints, that will lead to an underestimation of the joint shear strength. The results of the direct shear tests have indicated that both under cyclic pseudostatic and dynamic loadings the joint resistance upon reverse shearing is smaller than that of forward shearing and the joint dilation resulting from forward shearing recovers during reverse shearing. Within the range of variation of shearing velocity used in these tests, the shearing velocity effect on rock-joint behavior seems to be minor, and no noticeable effect on the peak joint shear strength and the joint shear strength for the reverse shearing is observed.

  16. Characterization of superconducting multilayers samples

    CERN Document Server

    Antoine, C Z; Berry, S; Bouat, S; Jacquot, J F; Villegier, J C; Lamura, G; Gurevich, A

    2009-01-01

    Best RF bulk niobium accelerating cavities have nearly reached their ultimate limits at rf equatorial magnetic field H  200 mT close to the thermodynamic critical field Hc. In 2006 Gurevich proposed to use nanoscale layers of superconducting materials with high values of Hc > HcNb for magnetic shielding of bulk niobium to increase the breakdown magnetic field inside SC RF cavities [1]. Depositing good quality layers inside a whole cavity is rather difficult but we have sputtered high quality samples by applying the technique used for the preparation of superconducting electronics circuits and characterized these samples by X-ray reflectivity, dc resistivity (PPMS) and dc magnetization (SQUID). Dc magnetization curves of a 250 nm thick Nb film have been measured, with and without a magnetron sputtered coating of a single or multiple stack of 15 nm MgO and 25 nm NbN layers. The Nb samples with/without the coating clearly exhibit different behaviors. Because SQUID measurements are influenced by edge an...

  17. Physicochemical characterization of Gozitan Honey

    Directory of Open Access Journals (Sweden)

    Everaldo Attard

    2013-10-01

    Full Text Available Honey quality is clearly defined in the EU Directive 2001/110/EC, and by Codex Alimentarius (Codex Stan 12-1981 and the International Honey Commission (IHC, 2002. Our investigation aimed to characterize the physicochemical properties of honey produced on a small island, Gozo which is situated near Malta.  Ten randomly collected honey samples were analysed for moisture content, pH, free acidity, water insoluble content, hydroxymethylfurfural (HMF content and total phenolic compounds.  Moisture content, pH, free acidity, water insoluble content, and HMF content were within the range specified in standards but the electrical conductivity was generally higher than 0.800 mS cm-1. This may be the result of the relatively high atmospheric and soil salinity on this small island. All the samples analysed were within the 40 mg kg-1 HMF limit, which is an indicator of honey quality. The total phenolic compounds, which represent some of the constituents derived from the nectar and pollen obtained during foraging, ranged between 236.555 and 294.209 GAE kg-1 honey. Principal Component Analysis showed the properties of polyfloral honey samples obtained from the southern part of the island to be different from those obtained from the northern part.

  18. Parametric characterizations in superparamagnetic latex

    Indian Academy of Sciences (India)

    Seda Beyaz; Hakan Kockar; Taner Tanrisever

    2014-05-01

    The effect of synthesis parameters on the production of superparamagnetic latex, which are magnetite nanoparticles covered with a poly(methyl methacrylate) layer, were studied. The synthesis method was based on the developed route of emulsifier-free emulsion polymerization. Under this study, effects of the monomer and initiator concentrations, the amount of magnetic sol, the stirring rate and the adding rate of the magnetic sol on the properties of synthesized latexes were investigated. The characterizations were performed by a high resolution transmission electron microscopy, a dynamic light scattering, a vibrating sample magnetometer and a gel permeation chromatography. The results showed that the monomer concentration was found to be the most effective parameter on latex stability. As the initiator amount and the stirring rate increased, saturation magnetization and average molecular weight decreased due to the reactions occurring between surfaces of magnetite nanoparticles and initiator fragments. On increasing amount of magnetic sol, the saturation magnetization and polymer molecular weight increased but the size of nanospheres was unchanged because of the ions in magnetic sol. It was seen that the desired size and magnetic properties of the latex could be obtained since the parameters were found to have substantial impact on their properties.

  19. Uranium mill ore dust characterization

    Energy Technology Data Exchange (ETDEWEB)

    Knuth, R.H.; George, A.C.

    1980-11-01

    Cascade impactor and general air ore dust measurements were taken in a uranium processing mill in order to characterize the airborne activity, the degree of equilibrium, the particle size distribution and the respirable fraction for the /sup 238/U chain nuclides. The sampling locations were selected to limit the possibility of cross contamination by airborne dusts originating in different process areas of the mill. The reliability of the modified impactor and measurement techniques was ascertained by duplicate sampling. The results reveal no significant deviation from secular equilibrium in both airborne and bulk ore samples for the /sup 234/U and /sup 230/Th nuclides. In total airborne dust measurements, the /sup 226/Ra and /sup 210/Pb nuclides were found to be depleted by 20 and 25%, respectively. Bulk ore samples showed depletions of 10% for the /sup 226/Ra and /sup 210/Pb nuclides. Impactor samples show disequilibrium of /sup 226/Ra as high as +-50% for different size fractions. In these samples the /sup 226/Ra ratio was generally found to increase as particle size decreased. Activity median aerodynamic diameters of the airborne dusts ranged from 5 to 30 ..mu..m with a median diameter of 11 ..mu..m. The maximum respirable fraction for the ore dusts, based on the proposed International Commission on Radiological Protection's (ICRP) definition of pulmonary deposition, was < 15% of the total airborne concentration. Ore dust parameters calculated for impactor duplicate samples were found to be in excellent agreement.

  20. Liquid effluent study characterization data

    Energy Technology Data Exchange (ETDEWEB)

    1990-05-01

    During the development of the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement), public comments were received regarding reduction of the discharge of liquid effluents into the soil column. As a result, the US Department of Energy (DOE), with concurrence of the Washington State Department of Ecology (WSDE)and the US Environmental Protection Agency (EPA), committed to a special project designed to document the discharge history and the charter of Hanford Site liquid discharges. The results of this project will be used in determining the need for additional waste stream analysis, and/or to negotiate additional milestones pertaining to such discharges in the Tri-Party Agreement. Wastestream sampling data collected prior to October 1989 were reported in the Waste Stream Characterization Report. Preliminary Stream-specific Reports were prepared which evaluated that data and proposed dangerous waste designations for each stream. This document contains the wastestream sampling and analysis data collected as part of the liquid effluent study. Data contained in this report were obtained from samples collected from October 1989 through March 1990. Information is presented on the wastestreams that have been sampled, the parameters analyzed, and the dates and times at which the samples were collected. This information will be evaluated in the final Stream-Specific Reports. 9 refs., 4 tabs.

  1. Geomechanical Characterization of Marcellus Shale

    Science.gov (United States)

    Villamor Lora, Rafael; Ghazanfari, Ehsan; Asanza Izquierdo, Enrique

    2016-09-01

    Understanding the reservoir conditions and material properties that govern the geomechanical behavior of shale formations under in situ conditions is of vital importance for many geomechanical applications. The development of new numerical codes and advanced multi-physical (thermo-hydro-chemo-mechanical) constitutive models has led to an increasing demand for fundamental material property data. Previous studies have shown that deformational rock properties are not single-value, well-defined, linear parameters. This paper reports on an experimental program that explores geomechanical properties of Marcellus Shale through a series of isotropic compression (i.e. σ 1 = σ 2 = σ 3) and triaxial (i.e. σ 1 > σ 2 = σ 3) experiments. Deformational and failure response of these rocks, as well as anisotropy evolution, were studied under different stress and temperature conditions using single- and multi-stage triaxial tests. Laboratory results revealed significant nonlinear and pressure-dependent mechanical response as a consequence of the rock fabric and the occurrence of microcracks in these shales. Moreover, multi-stage triaxial tests proved to be useful tools for obtaining failure envelopes using a single specimen. Furthermore, the anisotropic nature of Marcellus Shale was successfully characterized using a three-parameter coupled model.

  2. Fractal Characterization of Hyperspectral Imagery

    Science.gov (United States)

    Qiu, Hon-Iie; Lam, Nina Siu-Ngan; Quattrochi, Dale A.; Gamon, John A.

    1999-01-01

    Two Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) hyperspectral images selected from the Los Angeles area, one representing urban and the other, rural, were used to examine their spatial complexity across their entire spectrum of the remote sensing data. Using the ICAMS (Image Characterization And Modeling System) software, we computed the fractal dimension values via the isarithm and triangular prism methods for all 224 bands in the two AVIRIS scenes. The resultant fractal dimensions reflect changes in image complexity across the spectral range of the hyperspectral images. Both the isarithm and triangular prism methods detect unusually high D values on the spectral bands that fall within the atmospheric absorption and scattering zones where signature to noise ratios are low. Fractal dimensions for the urban area resulted in higher values than for the rural landscape, and the differences between the resulting D values are more distinct in the visible bands. The triangular prism method is sensitive to a few random speckles in the images, leading to a lower dimensionality. On the contrary, the isarithm method will ignore the speckles and focus on the major variation dominating the surface, thus resulting in a higher dimension. It is seen where the fractal curves plotted for the entire bandwidth range of the hyperspectral images could be used to distinguish landscape types as well as for screening noisy bands.

  3. Characterization of advanced electronic materials

    Energy Technology Data Exchange (ETDEWEB)

    Arko, A.J.; Heffner, R.H.; Hundley, M.F. [and others

    1997-08-01

    This is the final report of a three-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Our goal has been to extend the Laboratory`s competency in nuclear and advanced materials by characterizing (measuring and interpreting) physical properties of advanced electronic materials and in this process to bridge the gap between materials synthesis and theoretical understanding. Attention has focused on discovering new physics by understanding the ground states of materials in which electronic correlations dominate their properties. Among several accomplishments, we have discovered and interpreted pressure-induced superconductivity in CeRh{sub 2}Si{sub 2}, boron content in UBe{sub 13-x}B{sub x} and the origin of small gaps in the spin and charge excitation spectra of Ce{sub 3}Bi{sub 4}Pt{sub 3}, and we provided seminal understanding of large magnetoresistive effects in La{sub 1-x}Ca{sub x}MnO{sub 3}. This work has established new research directions at LANL and elsewhere, involved numerous collaborators from throughout the world and attracted several postdoctoral fellows.

  4. Geophysical characterization of subsurface barriers

    Energy Technology Data Exchange (ETDEWEB)

    Borns, D.J.

    1995-08-01

    An option for controlling contaminant migration from plumes and buried waste sites is to construct a subsurface barrier of a low-permeability material. The successful application of subsurface barriers requires processes to verify the emplacement and effectiveness of barrier and to monitor the performance of a barrier after emplacement. Non destructive and remote sensing techniques, such as geophysical methods, are possible technologies to address these needs. The changes in mechanical, hydrologic and chemical properties associated with the emplacement of an engineered barrier will affect geophysical properties such a seismic velocity, electrical conductivity, and dielectric constant. Also, the barrier, once emplaced and interacting with the in situ geologic system, may affect the paths along which electrical current flows in the subsurface. These changes in properties and processes facilitate the detection and monitoring of the barrier. The approaches to characterizing and monitoring engineered barriers can be divided between (1) methods that directly image the barrier using the contrasts in physical properties between the barrier and the host soil or rock and (2) methods that reflect flow processes around or through the barrier. For example, seismic methods that delineate the changes in density and stiffness associated with the barrier represents a direct imaging method. Electrical self potential methods and flow probes based on heat flow methods represent techniques that can delineate the flow path or flow processes around and through a barrier.

  5. Laboratory characterization of rock joints

    Energy Technology Data Exchange (ETDEWEB)

    Hsiung, S.M.; Kana, D.D.; Ahola, M.P.; Chowdhury, A.H.; Ghosh, A. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

    1994-05-01

    A laboratory characterization of the Apache Leap tuff joints under cyclic pseudostatic and dynamic loads has been undertaken to obtain a better understanding of dynamic joint shear behavior and to generate a complete data set that can be used for validation of existing rock-joint models. Study has indicated that available methods for determining joint roughness coefficient (JRC) significantly underestimate the roughness coefficient of the Apache Leap tuff joints, that will lead to an underestimation of the joint shear strength. The results of the direct shear tests have indicated that both under cyclic pseudostatic and dynamic loadings the joint resistance upon reverse shearing is smaller than that of forward shearing and the joint dilation resulting from forward shearing recovers during reverse shearing. Within the range of variation of shearing velocity used in these tests, the shearing velocity effect on rock-joint behavior seems to be minor, and no noticeable effect on the peak joint shear strength and the joint shear strength for the reverse shearing is observed.

  6. Characterizing humans on Riemannian manifolds.

    Science.gov (United States)

    Tosato, Diego; Spera, Mauro; Cristani, Marco; Murino, Vittorio

    2013-08-01

    In surveillance applications, head and body orientation of people is of primary importance for assessing many behavioral traits. Unfortunately, in this context people are often encoded by a few, noisy pixels so that their characterization is difficult. We face this issue, proposing a computational framework which is based on an expressive descriptor, the covariance of features. Covariances have been employed for pedestrian detection purposes, actually a binary classification problem on Riemannian manifolds. In this paper, we show how to extend to the multiclassification case, presenting a novel descriptor, named weighted array of covariances, especially suited for dealing with tiny image representations. The extension requires a novel differential geometry approach in which covariances are projected on a unique tangent space where standard machine learning techniques can be applied. In particular, we adopt the Campbell-Baker-Hausdorff expansion as a means to approximate on the tangent space the genuine (geodesic) distances on the manifold in a very efficient way. We test our methodology on multiple benchmark datasets, and also propose new testing sets, getting convincing results in all the cases.

  7. Lorentz-Force Hydrophone Characterization

    CERN Document Server

    Grasland-Mongrain, Pol; Gilles, Bruno; Poizat, Adrien; Chapelon, Jean-Yves; Lafon, Cyril

    2014-01-01

    A Lorentz-force hydrophone consists of a thin wire placed inside a magnetic field. When under the influence of an ultrasound pulse, the wire vibrates and an electrical signal is induced by the Lorentz force that is proportional to the pulse amplitude. In this study a compact prototype of such a hydrophone is introduced and characterized, and the hydrodynamic model previously developed is refined. It is shown that the wire tension has a negligible effect on the measurement of pressure. The frequency response of the hydrophone reaches 1 MHz for wires with a diameter ranging between 70 and 400 \\micro m. The hydrophone exhibits a directional response such that the signal amplitude differs by less than 3dB as the angle of the incident ultrasound pulse varies from -20$^o$ and +20$^o$. The linearity of the measured signal is confirmed across the 50 kPa to 10 MPa pressure range, and an excellent resistance to cavitation is observed. This hydrophone is of interest for high pressure ultrasound measurements including Hi...

  8. Mechanical Characterization of Mancos Shale

    Science.gov (United States)

    Broome, S.; Ingraham, M. D.; Dewers, T. A.

    2015-12-01

    A series of tests on Mancos shale have been undertaken to determine the failure surface and to characterize anisotropy. This work supports additional studies which are being performed on the same block of shale; fracture toughness, permeability, and chemical analysis. Mechanical tests are being conducted after specimens were conditioned for at least two weeks at 70% constant relative humidity conditions. Specimens are tested under drained conditions, with the constant relative humidity condition maintained on the downstream side of the specimen. The upstream is sealed. Anisotropy is determined through testing specimens that have been cored parallel and perpendicular to the bedding plane. Preliminary results show that when loaded parallel to bedding the shale is roughly 50% weaker. Test are run under constant mean stress conditions when possible (excepting indirect tension, unconfined compression, and hydrostatic). Tests are run in hydrostatic compaction to the desired mean stress, then differential stress is applied axially in displacement control to failure. The constant mean stress condition is maintained by decreasing the confining pressure by half of the increase in the axial stress. Results will be compared to typical failure criteria to investigate the effectiveness of capturing the behavior of the shale with traditional failure theory. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. SAND2015-6107 A.

  9. Characterizing Internet Worm Infection Structure

    CERN Document Server

    Wang, Qian; Chen, Chao

    2010-01-01

    Internet worm infection continues to be one of top security threats. Moreover, worm infection has been widely used by botnets to recruit new bots and construct P2P-based botnets. In this work, we attempt to characterize the network structure of Internet worm infection and shed light on the micro-level information of "who infects whom." Our work quantifies the infection ability of individual hosts and reveals the key characteristics of the underlying topologies formed by worm infection, i.e., the number of children and the generation of the Internet worm infection family tree. Specifically, we first analyze the infection tree of a wide class of worms, for which a new victim is compromised by each existing infected host with equal probability. We find that the number of children has asymptotically a geometric distribution with parameter 0.5. We also discover that the generation follows closely a Poisson distribution and the average path length of the worm infection family tree increases approximately logarithmi...

  10. Characterizing and modeling citation dynamics.

    Directory of Open Access Journals (Sweden)

    Young-Ho Eom

    Full Text Available Citation distributions are crucial for the analysis and modeling of the activity of scientists. We investigated bibliometric data of papers published in journals of the American Physical Society, searching for the type of function which best describes the observed citation distributions. We used the goodness of fit with Kolmogorov-Smirnov statistics for three classes of functions: log-normal, simple power law and shifted power law. The shifted power law turns out to be the most reliable hypothesis for all citation networks we derived, which correspond to different time spans. We find that citation dynamics is characterized by bursts, usually occurring within a few years since publication of a paper, and the burst size spans several orders of magnitude. We also investigated the microscopic mechanisms for the evolution of citation networks, by proposing a linear preferential attachment with time dependent initial attractiveness. The model successfully reproduces the empirical citation distributions and accounts for the presence of citation bursts as well.

  11. Characterization of Vanadium Flow Battery

    DEFF Research Database (Denmark)

    Bindner, Henrik W.; Krog Ekman, Claus; Gehrke, Oliver

    This report summarizes the work done at Risø-DTU testing a vanadium flow battery as part of the project “Characterisation of Vanadium Batteries” (ForskEl project 6555) with the partners PA Energy A/S and OI Electric A/S under the Danish PSO energy research program. A 15kW/120kWh vanadium battery...... has been installed as part of the distributed energy systems experimental facility, SYSLAB, at Risø DTU. A test programme has been carried out to get hands-on experience with the technology, to characterize the battery from a power system point of view and to assess it with respect to integration...... of wind energy in the Danish power system. The battery has been in operation for 18 months. During time of operation the battery has not shown signs of degradation of performance. It has a round-trip efficiency at full load of approximately 60% (depending on temperature and SOC). The sources of the losses...

  12. Reference manual for toxicity and exposure assessment and risk characterization. CERCLA Baseline Risk Assessment

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    The Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA, 1980) (CERCLA or Superfund) was enacted to provide a program for identifying and responding to releases of hazardous substances into the environment. The Superfund Amendments and Reauthorization Act (SARA, 1986) was enacted to strengthen CERCLA by requiring that site clean-ups be permanent, and that they use treatments that significantly reduce the volume, toxicity, or mobility of hazardous pollutants. The National Oil and Hazardous Substances Pollution Contingency Plan (NCP) (USEPA, 1985; USEPA, 1990) implements the CERCLA statute, presenting a process for (1) identifying and prioritizing sites requiring remediation and (2) assessing the extent of remedial action required at each site. The process includes performing two studies: a Remedial Investigation (RI) to evaluate the nature, extent, and expected consequences of site contamination, and a Feasibility Study (FS) to select an appropriate remedial alternative adequate to reduce such risks to acceptable levels. An integral part of the RI is the evaluation of human health risks posed by hazardous substance releases. This risk evaluation serves a number of purposes within the overall context of the RI/FS process, the most essential of which is to provide an understanding of ``baseline`` risks posed by a given site. Baseline risks are those risks that would exist if no remediation or institutional controls are applied at a site. This document was written to (1) guide risk assessors through the process of interpreting EPA BRA policy and (2) help risk assessors to discuss EPA policy with regulators, decision makers, and stakeholders as it relates to conditions at a particular DOE site.

  13. Characterization of Small (Energy CT.

    Science.gov (United States)

    Patel, Bhavik N; Bibbey, Alex; Choudhury, Kingshuk R; Leder, Richard A; Nelson, Rendon C; Marin, Daniele

    2017-10-01

    The purpose of this study is to determine whether single-phase contrast-enhanced dual-energy quantitative spectral analysis improves the accuracy of diagnosis of small (energy attenuation measurements. In this retrospective study, 136 consecutive patients (95 men and 41 women; mean age, 54 years) with 144 renal lesions (111 benign and 33 malignant) underwent single-energy unenhanced and dual-energy contrast-enhanced CT of the abdomen. For each renal lesion, attenuation measurements were obtained, and an attenuation change of 15 HU or greater was considered evidence of enhancement. Dual-energy spectral attenuation curves were generated for each lesion. The slope of each curve was measured between 40 and 50 keV (λHU40-50), 40 and 70 keV (λHU40-70), and 40 and 140 keV (λHU40-140). Mean lesion attenuation values and spectral attenuation curve parameters were compared between benign and malignant renal lesions by use of the two-sample t test. Diagnostic accuracy was assessed and validated using cross-validation analysis. With the use of cross-validated optimal thresholds at 100% sensitivity, specificity for differentiating between benign and malignant renal lesions improved significantly when both λHU40-70 and λHU40-140 were used, compared with conventional enhancement measurements (93% [103/111; 95% CI, 86-97%] vs 81% [90/111; 95% CI, 73-88%]) (p = 0.02). The sensitivity of λHU40-70 and λHU40-140 was also higher than that of conventional enhancement measurements, although it was not statistically significant. Single-phase contrast-enhanced dual-energy quantitative spectral analysis significantly improves the specificity for characterization of small (energy attenuation measurements.

  14. Synthesis and characterization of mibolerone

    Institute of Scientific and Technical Information of China (English)

    YANG Qing; FAN Bo-lin; TANG Rui-ren

    2007-01-01

    A simple and effective route for the synthesis of mibolerone was described starting from the estr-5(10)-en-3,17-dione in four steps with the overall yield of 47.0%. Thus, two methods for key intermediate methylnorandrost were investigated: one(method A) starting from estr-4-en-3,17-dione underwent 3-keto group protected with ethyl orthoformate to give 3-ethoxy-3,5-dien-estr-17-one, the other(method B) from estr-5(10)-en-3,17-dione and protected 3-keto group to give 3,3-dimethoxy-estr-5(10)-7-one in a mild acidic condition. Then, two intermediates were subsequently reacted with methyllithium followed by a mild hydrolytic procedure and gave methylnorandrost with total yield 25.0% and 86.0%, respectively. In the preparation of 6-dehydrogenation product of methylnorandrost, two procedures(method C and method D) were investigated: one was the protected 17α-methyl-17β-hydroxy △3,-5-enol ethers estrendiene brominated and the resulting 6-bromo-19-methylnortestosterone was then immediately dehydrohaloenated to give 6-dehydro-19-methylnortestosterone, the total yield only reaches 36.0%; the other was directly dehydrogenated with chloranil and the yield reaches 75.6% under the optimum conditions: in refluxing tetrahydrofuran,the molar ratio of methylnorandrost to chloranil is 0.66 and reaction time of 5 h. The titled compound and intermediates were characterized by 1H and 13C NMR, IRMS and elemental analysis.

  15. Geometric characterization of polymeric macrofibers

    Directory of Open Access Journals (Sweden)

    A. R. E. Cáceres

    Full Text Available ABSTRACTThe geometric characteristics of synthetic macrofibers are important because they affect the behavior of fiber-reinforced concrete (FRC. Because there is a lack of specific, relevant publications in Brazil, the European standard EN14889-2:2006 was adopted as a reference to perform the characterization. Thus, an experimental plan was developed to assess the adequacy of testing procedures for the qualification of synthetic macrofibers for use in FRC. Two types of macrofibers were evaluated. The length measurement was performed using two methods: the caliper method, which is a manual measurement, and the digital image analysis method using the ImageJ software for image processing. These aforementioned methods were used to determine the diameter together with the density method, which is an indirect method that uses the developed length obtained by one of the previous methods. The statistical analyses revealed that the length results are similar regardless of the method used. However, the macrofibers must be pre-stretched to maximize the accuracy of caliper measurements. The caliper method for diameter determination has the disadvantage of underestimating the macrofiber cross-section because of the pressure applied by the load claws. In contrast, the digital image analysis method obtains the projected diameter in a single plane, which overestimate the diameter because the macrofibers are oriented with the pressure of the scanner cover. Thus, these techniques may result in false projections of the diameters that will depend on the level of torsion in the macrofibers. It was concluded that both the caliper method using previously stretched macrofibers and the digital imaging method can be used to measure length. The density method presented the best results for the diameter determination because these results were not affected by the method chosen to determine the length.

  16. Characterize Human Forward Contamination Project

    Science.gov (United States)

    Rucker, Michelle

    2015-01-01

    Let's face it: wherever we go, we will inevitably carry along the little critters that live in and on us. Conventional wisdom has long held that it's unlikely those critters could survive the space environment, but in 2007 microscopic animals called Tardigrades survived exposure to space and in 2008 Cyanobacteria lived for 548 days outside the International Space Station (ISS). But what about the organisms we might reasonably expect a crewed spacecraft to leak or vent? Do we even know what they are? How long might our tiny hitch-hikers survive in close proximity to a warm spacecraft that periodically leaks/vents water or oxygen-and how might they mutate with long-duration exposure? Unlike the Mars rovers that we cleaned once and sent on their way, crew members will provide a constantly regenerating contaminant source. Are we prepared to certify that we can meet forward contamination protocols as we search for life at new destinations? This project has four technical objectives: 1. TEST: Develop a test plan to leverage existing equipment (i.e. ISS) to characterize the kinds of organisms we can reasonably expect pressurized, crewed volumes to vent or leak overboard; as part of testing, we'll need to develop an Extravehicular Activity (EVA)-compatible tool that can withstand the pressure and temperature extremes of space, as well as collect, separate, and store multiple samples; 2. ANALYSIS: Develop an analysis plan to study those organisms in relevant destination environments, including spacecraft-induced conditions; 3. MODEL: Develop a modeling plan to model organism transport mechanisms in relevant destination environments; 4. SHARE: Develop a plan to disseminate findings and integrate recommendations into exploration requirements & ops. In short, we propose a system engineering approach to roadmap the necessary experiments, analysis, and modeling up front--rather than try to knit together disparate chunks of data into a sensible conclusion after the fact.

  17. Surface characterization of platinum electrodes.

    Science.gov (United States)

    Solla-Gullón, José; Rodríguez, Paramaconi; Herrero, Enrique; Aldaz, Antonio; Feliu, Juan M

    2008-03-14

    The quantitative analysis of the different surface sites on platinum samples is attempted from pure voltammetric data. This analysis requires independent knowledge of the fraction of two-dimensional (111) and (100) domains. Specific site-probe reactions are employed to achieve this goal. Irreversibly-adsorbed bismuth and tellurium have been revealed to be sensitive to the presence of (111) terrace domains of different width whereas almost all sites involved in (100) ordered domains have been characterized through germanium adatoms. The experimental protocol follows that used with well-defined single-crystal electrodes and, therefore, requires careful control of the surface cleanliness. Platinum basal planes and their vicinal stepped surfaces have been employed to obtain calibration plots between the charge density measured under the adatom redox peak, specific for the type of surface site, and the corresponding terrace size. The evaluation of the (100) bidimensional domains can also be achieved using the voltammetric profiles, once the fraction of (111) ordered domains present in the polyoriented platinum has been determined and their featureless contribution has been subtracted from the whole voltammetric response. Using that curve, it is possible to perform a deconvolution of the adsorption states of the polycrystalline sample different from those related to (111) domains. The fraction of (100)-related states in the deconvoluted voltammogram can then be compared to that expected from the independent estimation coming from the charge involved in the redox process undergone by the irreversibly-adsorbed germanium and thus check the result of the deconvolution. The information about the surface-site distribution can also be applied to analyze the voltammetric profile of nanocrystalline platinum electrodes.

  18. On characterizing terrain visibility graphs

    Directory of Open Access Journals (Sweden)

    William Evans

    2015-06-01

    Full Text Available A terrain is an $x$-monotone polygonal line in the $xy$-plane. Two vertices of a terrain are mutually visible if and only if there is no terrain vertex on or above the open line segment connecting them. A graph whose vertices represent terrain vertices and whose edges represent mutually visible pairs of terrain vertices is called a terrain visibility graph. We would like to find properties that are both necessary and sufficient for a graph to be a terrain visibility graph; that is, we would like to characterize terrain visibility graphs.Abello et al. [Discrete and Computational Geometry, 14(3:331--358, 1995] showed that all terrain visibility graphs are “persistent”. They showed that the visibility information of a terrain point set implies some ordering requirements on the slopes of the lines connecting pairs of points in any realization, and as a step towards showing sufficiency, they proved that for any persistent graph $M$ there is a total order on the slopes of the (pseudo lines in a generalized configuration of points whose visibility graph is $M$.We give a much simpler proof of this result by establishing an orientation to every triple of vertices, reflecting some slope ordering requirements that are consistent with $M$ being the visibility graph, and prove that these requirements form a partial order. We give a faster algorithm to construct a total order on the slopes. Our approach attempts to clarify the implications of the graph theoretic properties on the ordering of the slopes, and may be interpreted as defining properties on an underlying oriented matroid that we show is a restricted type of $3$-signotope.

  19. SHAPE CHARACTERIZATION OF CONCRETE AGGREGATE

    Directory of Open Access Journals (Sweden)

    Jing Hu

    2011-05-01

    Full Text Available As a composite material, the performance of concrete materials can be expected to depend on the properties of the interfaces between its two major components, aggregate and cement paste. The microstructure at the interfacial transition zone (ITZ is assumed to be different from the bulk material. In general, properties of conventional concrete have been found favoured by optimum packing density of the aggregate. Particle size is a common denominator in such studies. Size segregation in the ITZ among the binder particles in the fresh state, observed in simulation studies by concurrent algorithm-based SPACE system, additionally governs density as well as physical bonding capacity inside these shell-like zones around aggregate particles. These characteristics have been demonstrated qualitatively pertaining also after maturation of the concrete. Such properties of the ITZs have direct impact on composite properties. Despite experimental approaches revealed effects of aggregate grain shape on different features of material structure (among which density, and as a consequence on mechanical properties, it is still an underrated factor in laboratory studies, probably due to the general feeling that a suitable methodology for shape characterization is not available. A scientific argument hindering progress is the interconnected nature of size and shape. Presently, a practical problem preventing shape effects to be emphasized is the limitation of most computer simulation systems in concrete technology to spherical particles. New developments at Delft University of Technology will make it possible in the near future to generate jammed states, or other high-density fresh particle mixtures of non-spherical particles, which thereupon can be subjected to hydration algorithms. This paper will sketch the outlines of a methodological approach for shape assessment of loose (non-embedded aggregate grains, and demonstrate its use for two types of aggregate, allowing

  20. Characterization of ashes from biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Frandsen, F.J.; Hansen, L.A. [Technical Univ. of Denmark. Dept. of Chemical Engineering (Denmark); Soerensen, H.S. [Geological Survey of Denmark and Greenland (Denmark); Hjuler, K. [dk-TEKNIK. Energy and Environment (Denmark)

    1998-02-01

    One motivation for initiating the present project was that the international standard method of estimating the deposit propensity of solid fuels, of which a number of variants exist (e.g. ISO, ASTM, SD, DIN), has shown to be unsuitable for biomass ashes. This goal was addressed by the development of two new methods for the detection of ash fusibility behaviour based on Simultaneous Thermal Analysis (STA) and High Temperature Light Microscopy (HTLM), respectively. The methods were developed specifically for ashes from biofuels, but are suitable for coal ashes as well. They have been tested using simple salt mixtures, geological standards and samples from straw CHP and coal-straw PF combustion plants. All samples were run in a nitrogen atmosphere at a heating rate of 10 deg. C/min. In comparison with the standard method, the new methods are objective and have superior repeatability and sensitivity. Furthermore, the two methods enable the melting behavior to be characterized by a continuous measurement of melt fraction versus temperature. Due to this two-dimensional resolution of the results, the STA and HTLM methods provide more information than the standard method. The study of bottom ash and fly ash as well as deposit samples from straw test firings at the Haslev and Slagelse Combined Heat and Power plants resulted in a better understanding of mineral behaviour during straw grate firing. In these tests a number of straws were fired which had been carefully selected for having different qualities with respect to sort and potassium and chlorine contents. By studying bottom ashes from Slagelse it was found that the melting behaviour correlated with the deposition rate on a probe situated at the outlet part of the combustion zone. (EG)

  1. Processing and Characterization of Needled Carbon Composites

    Science.gov (United States)

    2015-12-01

    ARL-RP-0563 ● DEC 2015 US Army Research Laboratory Processing and Characterization of Needled Carbon Composites by Bradley D...US Army Research Laboratory Processing and Characterization of Needled Carbon Composites by Bradley D Lawrence TKC Global, LLC; Herndon, VA...

  2. Some Characterizations of Convex Interval Games

    NARCIS (Netherlands)

    Brânzei, R.; Tijs, S.H.; Alparslan-Gok, S.Z.

    2008-01-01

    This paper focuses on new characterizations of convex interval games using the notions of exactness and superadditivity. We also relate big boss interval games with concave interval games and obtain characterizations of big boss interval games in terms of exactness and subadditivity.

  3. Constant Width Planar Computation Characterizes ACC0

    DEFF Research Database (Denmark)

    Hansen, Kristoffer Arnsfelt

    2006-01-01

    We obtain a characterization of ACC0 in terms of a natural class of constant width circuits, namely in terms of constant width polynomial size planar circuits. This is shown via a characterization of the class of acyclic digraphs which can be embedded on a cylinder surface in such a way that all...

  4. Constant Width Planar Computation Characterizes ACC0

    DEFF Research Database (Denmark)

    Hansen, K.A.

    2004-01-01

    We obtain a characterization of ACC 0 in terms of a natural class of constant width circuits, namely in terms of constant width polynomial size planar circuits. This is shown via a characterization of the class of acyclic digraphs which can be embedded on a cylinder surface in such a way that all...

  5. Probabilistic Meteorological Characterization for Turbine Loads

    DEFF Research Database (Denmark)

    Kelly, Mark C.; Larsen, Gunner Chr.; Dimitrov, Nikolay Krasimirov;

    2014-01-01

    Beyond the existing, limited IEC prescription to describe fatigue loads on wind turbines, we look towards probabilistic characterization of the loads via analogous characterization of the atmospheric flow, particularly for today's "taller" turbines with rotors well above the atmospheric surface....... These are used as input to loads calculation, and with a statistical loads output description, they allow for improved design and loads calculations....

  6. Characterization techniques for surface-micromachined devices

    Energy Technology Data Exchange (ETDEWEB)

    Eaton, W.P.; Smith, N.F.; Irwin, L.; Tanner, D.M.

    1998-08-01

    Using a microengine as the primary test vehicle, the authors have examined several aspects of characterization. Parametric measurements provide fabrication process information. Drive signal optimization is necessary for increased microengine performance. Finally, electrical characterization of resonant frequency and quality factor can be more accurate than visual techniques.

  7. Axiomatic Characterizations of IVF Rough Approximation Operators

    Directory of Open Access Journals (Sweden)

    Guangji Yu

    2014-01-01

    Full Text Available This paper is devoted to the study of axiomatic characterizations of IVF rough approximation operators. IVF approximation spaces are investigated. The fact that different IVF operators satisfy some axioms to guarantee the existence of different types of IVF relations which produce the same operators is proved and then IVF rough approximation operators are characterized by axioms.

  8. Characterization of Ultrasonic Transducers. Measurement report

    DEFF Research Database (Denmark)

    Wilhjelm, Jens Erik

    1996-01-01

    This report contains the first results of a field measurement program for characterizing ultrasonic transducers in use at the Department. Specifically, a number of Panametrics Inc, transducers are characterized by using a 0.1 mm point scatterer as target, which is moved in front of the transdcuer....

  9. Some Characterizations of Convex Interval Games

    NARCIS (Netherlands)

    Brânzei, R.; Tijs, S.H.; Alparslan-Gok, S.Z.

    2008-01-01

    This paper focuses on new characterizations of convex interval games using the notions of exactness and superadditivity. We also relate big boss interval games with concave interval games and obtain characterizations of big boss interval games in terms of exactness and subadditivity.

  10. Multi-scale characterization of monument limestones

    CERN Document Server

    Beck, K; Al-Mukhtar, M; Rozenbaum, Olivier

    2003-01-01

    Among the parameters influencing stone deterioration, moisture and water movements through the pore network are essential. This communication presents differents methods to characterize stones and to determinate the water transfer properties. Results are analysed for two limestones having similar total porosity, but characterized by different pore networks. These different porous systems govern dissimilar water properties.

  11. Characterization monitoring & sensor technology crosscutting program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    The purpose of the Characterization, Monitoring, and Sensor Technology Crosscutting Program (CMST-CP) is to deliver appropriate characterization, monitoring, and sensor technology (CMST) to the OFfice of Waste Management (EM-30), the Office of Environmental Restoration (EM-40), and the Office of Facility Transition and Management (EM-60).

  12. 40 CFR 194.24 - Waste characterization.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Waste characterization. 194.24 Section 194.24 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) RADIATION PROTECTION... General Requirements § 194.24 Waste characterization. (a) Any compliance application shall describe...

  13. Rheological characterization of media containing Penicillium chrysogenum

    DEFF Research Database (Denmark)

    Pedersen, Annemarie Gade; Bundgaard-Nielsen, Mikael; Nielsen, Jens;

    1993-01-01

    Samples from fed-batch fermentations of Penicillium chrysogenum on complex medium are rheologically characterized. The behavior is well described by a power law model for which the parameters are estimates. Furthermore, two types of model media are characterized and compared with the real...

  14. Axiomatic Characterizations of the Choquet Integral

    DEFF Research Database (Denmark)

    Groes, Ebbe; Whitta-Jacobsen, Hans Jørgen; Sloth, Birgitte

    The Choquet integral is an integral part of recent advances in decision theory involving non-additive measures. In this article we present two new axiomatic characterizations of this functional......The Choquet integral is an integral part of recent advances in decision theory involving non-additive measures. In this article we present two new axiomatic characterizations of this functional...

  15. Axiomatic Characterizations of the Choquet Integral

    DEFF Research Database (Denmark)

    Groes, Ebbe; Jacobsen, Hans Jørgen; Sloth, Birgitte

    1998-01-01

    The Choquet integral is an integral part of recent advances in decision theory involving non-additive measures. In this article we present two new axiomatic characterizations of this functional.......The Choquet integral is an integral part of recent advances in decision theory involving non-additive measures. In this article we present two new axiomatic characterizations of this functional....

  16. The Preparation and Characterization of Materials.

    Science.gov (United States)

    Wold, Aaron

    1980-01-01

    Presents several examples illustrating different aspects of materials problems, including problems associated with solid-solid reactions, sintering and crystal growth, characterization of materials, preparation and characterization of stoichiometric ferrites and chromites, copper-sulfur systems, growth of single crystals by chemical vapor…

  17. COGNATE: comparative gene annotation characterizer.

    Science.gov (United States)

    Wilbrandt, Jeanne; Misof, Bernhard; Niehuis, Oliver

    2017-07-17

    The comparison of gene and genome structures across species has the potential to reveal major trends of genome evolution. However, such a comparative approach is currently hampered by a lack of standardization (e.g., Elliott TA, Gregory TR, Philos Trans Royal Soc B: Biol Sci 370:20140331, 2015). For example, testing the hypothesis that the total amount of coding sequences is a reliable measure of potential proteome diversity (Wang M, Kurland CG, Caetano-Anollés G, PNAS 108:11954, 2011) requires the application of standardized definitions of coding sequence and genes to create both comparable and comprehensive data sets and corresponding summary statistics. However, such standard definitions either do not exist or are not consistently applied. These circumstances call for a standard at the descriptive level using a minimum of parameters as well as an undeviating use of standardized terms, and for software that infers the required data under these strict definitions. The acquisition of a comprehensive, descriptive, and standardized set of parameters and summary statistics for genome publications and further analyses can thus greatly benefit from the availability of an easy to use standard tool. We developed a new open-source command-line tool, COGNATE (Comparative Gene Annotation Characterizer), which uses a given genome assembly and its annotation of protein-coding genes for a detailed description of the respective gene and genome structure parameters. Additionally, we revised the standard definitions of gene and genome structures and provide the definitions used by COGNATE as a working draft suggestion for further reference. Complete parameter lists and summary statistics are inferred using this set of definitions to allow down-stream analyses and to provide an overview of the genome and gene repertoire characteristics. COGNATE is written in Perl and freely available at the ZFMK homepage ( https://www.zfmk.de/en/COGNATE ) and on github ( https

  18. Characterization of Leptin Intracellular Trafficking

    Directory of Open Access Journals (Sweden)

    E Walum

    2009-12-01

    Full Text Available Leptin is produced by adipose tissue, and its concentration in plasma is related to the amount of fat in the body. The leptin receptor (OBR is a member of the class I cytokine receptor family and several different isoforms, produced by alternative mRNA splicing are found in many tissues, including the hypothalamus. The two predominant isoforms includes a long form (OBRl with an intracellular domain of 303 amino acids and a shorter form (OBRs with an intracellular domain of 34 amino acids. Since OBRl is mainly expressed in the hypotalamus, it has been suggested to be the main signalling form. The peripheral production of leptin by adipocyte tissue and its effects as a signal of satiety in the central nervous system imply that leptin gains access to regions of the brain regulating in energy balance by crossing the blood-brain barrier. In an attempt to characterize the intracellular transport of leptin, we have followed binding internalization and degradation of leptin in HEK293 cells. We have also monitored the intracellular transport pathway of fluorescent conjugated leptin in HEK293 cells. Phenylarsine oxide, a general inhibitor of endocytosis, as well as incubation at mild hypertonic conditions, prevented the uptake of leptin, confirming a receptor-mediated internalization process. When internalized, 125I-leptin was rapidly accumulated inside the cells and reached a maximum after 10 min. After 70 minutes about 40-50% of total counts in each time point were found in the medium as TCA-soluble material. Leptin sorting, at the level of early endosomes, did not seem to involve recycling endosomes, since FITC-leptin was sorted from Cy3- transferrin containing compartments at 37°C. At 45 minutes of continuos internalization, FITC-leptin appeared mainly accumulated in late endocytic structures colocalizing with internalized rhodamine coupled epidermial growth factor (EGF and the lysosomal marker protein lamp-1. The transport of leptin was also shown

  19. Characterization and Modeling of Inductors.

    Science.gov (United States)

    Yeh, Long-Ching

    This dissertation presents the modeling and characterization of inductors wound on a ferrite core, an amorphous alloy (Metglas('(REGTM))) core, a permalloy 4 mil tape wound core and three permalloy 1 mil tape wound cores with different kinds of heat treatment, and an MPP core. Many kinds of measurements have been made including normal inductance measurements, incremental inductance measurements, inductance quality factor measurements, effective series resistance measurements, hysteresis loop observations and measurements of waveform distortion. All the materials studied were found to have certain common features: the normal inductance increases as signal amplitude increases but eventually passes through a maximum value. Incremental inductance, on the other hand, is independent of direct current below a critical value and then decreases for larger values of current. The critical d-c field for incremental inductance was found to have the same value as the peak a-c field at which there is a change of the rate of increase of normal inductance. Both critical fields may be attributed to the same physical process, the onset of irreversible motion of domain walls. This new finding, for the first time, relates normal inductance and incremental inductance measurements. A new mathematical model for inductors is worked out using a computer curve-fitting program to describe the inductance and equivalent series resistance measured with a-c signal levels ranging from low to high amplitude. The model, which may be used to calculate the quality factor and the power loss of inductors, also explains Legg's equation in an extended form. The voltage waveform of an inductor was found to be somewhat distorted even when the applied current is a pure sinusoid. The measured distortion was less than is predicted by a new "instantaneous" model of permeability but was in reasonable agreement with a domain-state interpretation of the Rayleigh model. Other findings include a critique and

  20. Characterization of MIPAS elevation pointing

    Directory of Open Access Journals (Sweden)

    M. Kiefer

    2007-01-01

    Full Text Available Sufficient knowledge of the pointing is essential for analyses of limb emission measurements. The scientific retrieval processor for MIPAS on ENVISAT operated at IMK allows the retrieval of pointing information in terms of tangent altitudes along with temperature. The retrieved tangent altitudes are independent of systematic offsets in the engineering Line-Of-Sight (LOS information delivered with the ESA Level 1b product. The difference of pointing retrieved from the reprocessed high resolution MIPAS spectra and the engineering pointing information was examined with respect to spatial/temporal behaviour. Among others the following characteristics of MIPAS pointing could be identified: Generally the engineering tangent altitudes are too high by 0–1.8 km with conspicuous variations in this range over time. Prior to December of 2003 there was a drift of about 50–100 m/h, which was due to a slow change in the satellite attitude. A correction of this attitude is done twice a day, which leads to discontinuities in the order of 1–1.5 km in the tangent altitudes. Occasionally discontinuities up to 2.5 km are found, as already reported from MIPAS and SCIAMACHY observations. After an update of the orbit position software in December 2003 values of drift and jumps are much reduced. There is a systematic difference in the mispointing between the poles which amounts to 1.5–2 km, i.e. there is a conspicuous orbit-periodic feature. The analysis of the correlation between the instrument's viewing angle azimuth and differential mispointing supports the hypotheses that a major part of this latter phenomenon can be attributed to an error in the roll angle of the satellite/instrument system of approximately 42 mdeg. One conclusion is that ESA level 2 data should be compared to other data exclusively on tangent pressure levels. Complementary to IMK data, ESA operational LOS calibration results were used to characterize MIPAS pointing. For this purpose

  1. Characterization of MIPAS elevation pointing

    Directory of Open Access Journals (Sweden)

    M. Kiefer

    2006-12-01

    Full Text Available Sufficient knowledge of the pointing is essential for analyses of limb emission measurements. The scientific retrieval processor for MIPAS operated at IMK allows to retrieve pointing information in terms of tangent altitudes along with temperature. The retrieved tangent altitudes are independent of the engineering Line-Of-Sight (LOS information delivered with the ESA Level 1b product. The difference of pointing retrieved from the reprocessed high resolution MIPAS spectra and the engineering pointing information was examined with respect to spatial/temporal behaviour. Among others the following characteristics of MIPAS pointing could be identified: Generally the engineering tangent altitudes are too high by 0–1.8 km with conspicuous variations in this range over time. Prior to December of 2003 there was a drift of about 50–100 m/h, which was due to a slow change in the satellite attitude. A correction of this attitude is done twice a day, which led to discontinuities in the order of up to 2 km in the tangent altitudes. There is a systematic difference in the mispointing between the poles which amounts to 1.5–2 km, i.e. there is a conspicuous orbit-periodic feature. The analysis of the correlation between the instrument's viewing angle azimuth and differential mispointing supports the hypotheses that a major part of this latter phenomenon can be attributed to an uncorrected roll angle of the satellite/instrument system of approximately 54 mdeg. Complementary to this, ESA operational LOS calibration results were used to characterize MIPAS pointing. For this purpose MIPAS is used as a radiometer while the passage of infrared bright stars through the instrument's field of view is recorded. Deviation from expected time of passage gives information about mispointing. A pronounced seasonal variation of the LOS is seen before a correction of on-board software took place in December of 2003. Further a pitch bias of 24 mdeg with respect to

  2. Double tracks test site characterization report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-05-01

    This report presents the results of site characterization activities performed at the Double Tracks Test Site, located on Range 71 North, of the Nellis Air Force Range (NAFR) in southern Nevada. Site characterization activities included reviewing historical data from the Double Tracks experiment, previous site investigation efforts, and recent site characterization data. The most recent site characterization activities were conducted in support of an interim corrective action to remediate the Double Tracks Test Site to an acceptable risk to human health and the environment. Site characterization was performed using a phased approach. First, previously collected data and historical records sere compiled and reviewed. Generalized scopes of work were then prepared to fill known data gaps. Field activities were conducted and the collected data were then reviewed to determine whether data gaps were filled and whether other areas needed to be investigated. Additional field efforts were then conducted, as required, to adequately characterize the site. Characterization of the Double Tracks Test Site was conducted in accordance with the US Department of Energy`s (DOE) Streamlined Approach for Environmental Restoration (SAFER).

  3. Final Technical Report: Characterizing Emerging Technologies.

    Energy Technology Data Exchange (ETDEWEB)

    King, Bruce Hardison [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hansen, Clifford [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Stein, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Riley, Daniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gonzalez, Sigifredo [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    The Characterizing Emerging Technologies project focuses on developing, improving and validating characterization methods for PV modules, inverters and embedded power electronics. Characterization methods and associated analysis techniques are at the heart of technology assessments and accurate component and system modeling. Outputs of the project include measurement and analysis procedures that industry can use to accurately model performance of PV system components, in order to better distinguish and understand the performance differences between competing products (module and inverters) and new component designs and technologies (e.g., new PV cell designs, inverter topologies, etc.).

  4. Advances on models, characterizations and applications

    CERN Document Server

    Balakrishnan, N; Gebizlioglu, O L

    2005-01-01

    PrefaceContributorsThe Shapes of the Probability Density, Hazard, and Reverse Hazard FunctionsMasaaki SibuyaStochastic Ordering of Risks, Influence of Dependence, and A.S. ConstructionsLudger RüschendorfThe q-Factorial Moments of Discrete q-Distributions and a Characterization of the Euler DistributionCh.A. Charalambides and N. PapadatosOn the Characterization of Distributions Through the Properties of Conditional Expectations of Order StatisticsI. Bairamov and O. GebizliogluCharacterization of the Exponential Distribution by Conditional Expectations of Generalized SpacingsErhard Cramer and Ud

  5. Easy characterization of petroleum fractions: Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Miquel, J. (Univ. Politecnica de Catalunya (Spain)); Castells, F. (Univ. Rovira i Virgili, Catalunya (Spain))

    1993-12-01

    A new method for characterizing petroleum fractions, based on pseudocomponent breakdown using the integral method has been developed. It requires only that one has an atmospheric true boiling point (tbp) distillation curve and known the entire fraction density. The proposed characterization procedure is valid for representing any oil fraction (light or heavy) with a boiling point range smaller than 300 K. It is based on the hypothesis of constant Watson's characterization factor, K[sub w], for all the pseudocomponents. Outside this range, it is less accurate (greater errors in material and molar balances). Therefore, a method considering the variable K[sub w] is best to treat these fractions.

  6. Characterization Well R-22 Geochemistry Report

    Energy Technology Data Exchange (ETDEWEB)

    Patrick Longmire

    2002-09-01

    This report provides analytical results for groundwater collected during four characterization-sampling rounds conducted at well R-22 from March 2001 through March 2002. Characterization well R-22 was sampled from March 6 through 13, 2001; June 19 through 26, 2001; November 30 through December 10, 2001; and February 27 through March 7, 2002. The goal of the characterization efforts was to assess the hydrochemistry and to determine whether or not contaminants are present in the regional aquifer in the vicinity of the well. A geochemical evaluation of the analytical results for the well is also presented in this report.

  7. Nanoporous Gold: Fabrication, Characterization, and Applications

    Directory of Open Access Journals (Sweden)

    Michael L. Reed

    2009-12-01

    Full Text Available Nanoporous gold (np-Au has intriguing material properties that offer potential benefits for many applications due to its high specific surface area, well-characterized thiol-gold surface chemistry, high electrical conductivity, and reduced stiffness. The research on np-Au has taken place on various fronts, including advanced microfabrication and characterization techniques to probe unusual nanoscale properties and applications spanning from fuel cells to electrochemical sensors. Here, we provide a review of the recent advances in np-Au research, with special emphasis on microfabrication and characterization techniques. We conclude the paper with a brief outline of challenges to overcome in the study of nanoporous metals.

  8. Characterization of Cloud Water-Content Distribution

    Science.gov (United States)

    Lee, Seungwon

    2010-01-01

    The development of realistic cloud parameterizations for climate models requires accurate characterizations of subgrid distributions of thermodynamic variables. To this end, a software tool was developed to characterize cloud water-content distributions in climate-model sub-grid scales. This software characterizes distributions of cloud water content with respect to cloud phase, cloud type, precipitation occurrence, and geo-location using CloudSat radar measurements. It uses a statistical method called maximum likelihood estimation to estimate the probability density function of the cloud water content.

  9. What characterizes persons with poor mental health?

    DEFF Research Database (Denmark)

    Christensen, Anne Illemann; Davidsen, Michael; Kjøller, Mette;

    2014-01-01

    Background: The aim of the study was to identify and characterize groups with poor mental health defined by the SF-12 Mental Component Summary (MCS-12) scale. Methods: The study is based on the Danish Health and Morbidity Survey 2005 and includes 10,082 participants (16 years or older). Data were...... health were further characterized by being a heavy smoker, and having a BMI below 25. Women with poor mental health were further characterized by being 16-44 years old and sedentary in leisure time. CONCLUSIONS THE PREVALENCE OF POOR MENTAL HEALTH IS HIGHER AMONG WOMEN THAN MEN, AND DIFFERENT FACTORS...

  10. A lexicographic shellability characterization of geometric lattices

    CERN Document Server

    Davidson, Ruth

    2011-01-01

    Geometric lattices are characterized as those finite, atomic lattices such that every atom ordering induces a lexicographic shelling given by an edge labeling known as a minimal labeling. This new characterization fits into a similar paradigm as McNamara's characterization of supersolvable lattices as those lattices admitting a different type of lexicographic shelling, namely one in which each maximal chain is labeled with a permutation of {1,...,n}. Geometric lattices arise as the intersection lattices of central hyperplane arrangements and more generally as the lattices of flats for matroids.

  11. Data requirements and acquisition for reservoir characterization

    Energy Technology Data Exchange (ETDEWEB)

    Jackson, S.; Chang, Ming Ming; Tham, Min.

    1993-03-01

    This report outlines the types of data, data sources and measurement tools required for effective reservoir characterization, the data required for specific enhanced oil recovery (EOR) processes, and a discussion on the determination of the optimum data density for reservoir characterization and reservoir modeling. The two basic sources of data for reservoir characterization are data from the specific reservoir and data from analog reservoirs, outcrops, and modern environments. Reservoir data can be divided into three broad categories: (1) rock properties (the container) and (2) fluid properties (the contents) and (3)interaction between reservoir rock and fluid. Both static and dynamic measurements are required.

  12. Goniometric characterization of LED based greenhouse lighting

    DEFF Research Database (Denmark)

    Thorseth, Anders; Lindén, Johannes; Corell, Dennis Dan

    2015-01-01

    This paper describes a demonstration of goniospectroradiometry for characterizations of new light emitting diode (LED) based luminaries for enhanced photosynthesis in greenhouses. It highlights the differences between measurement of the traditional high pressure sodium (HPS) luminaries and the LED...

  13. Global Land Cover Characterization: 1992-1993

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The U.S. Geological Survey (USGS) has a long history of involvement in multi-scale, and multi-temporal land cover characterization and mapping of the world. During...

  14. Waianae Ecological Characterization Oahu, Hawaii 2004

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Waianae Ecological Characterization is a digital synthesis of historical and current physical, ecological, and cultural information about the Waianae moku, which...

  15. Synthesis, Characterization and Antibacterial Evaluations of the ...

    African Journals Online (AJOL)

    MBI

    2014-06-05

    Jun 5, 2014 ... ... Ni(II) and Zn(II) were synthesized and characterized by molar conductance, FTIR, NMR, UV-Visible and elemental analysis. ... 10mmol) at room temperature and then refluxed for ..... Cytochrome P450 dependent metabolism.

  16. Isolation, production, purification, assay and characterization of ...

    African Journals Online (AJOL)

    Isolation, production, purification, assay and characterization of fibrinolytic ... are isolated from Bacillus subtilis, β-haemolytic Streptococci and urine sample. ... recombinant E.coli containing short fragment genomic DNA of Pseudomonas sp.

  17. Molecular characterization of induced mutagenesis through gamma ...

    African Journals Online (AJOL)

    Windows

    2014-02-12

    Feb 12, 2014 ... Molecular characterization of induced mutants (M1 generation) with 47 Random amplified polymorphic DNA ... produces high quality oil whose chemical characteristics ...... Teng N, Chen F, Jiang Z, Fang W, Chen T (2008).

  18. Characterizing Site Hydrology (Region 10, Seattle, WA)

    Science.gov (United States)

    Hydrogeology is the foundation of subsurface site characterization for evaluations of monitored natural attenuation (MNA). Three case studies are presented. Examples of the potentially detrimental effects of drilling additives on ground-water samples from monitoring wells are d...

  19. Prevalence and molecular characterization of plasmid- mediated ...

    African Journals Online (AJOL)

    lactamase genes among nosocomial Staphylococcus aureus drug resistance isolates in Taiwan. .... Table 2: Plasmid profiles of the clinical antibiotic-resistant pathogens. Strain. Profile .... Madec J. Characterization of clinical canine methicillin-.

  20. Recent analytical developments for powder characterization

    Science.gov (United States)

    Brackx, E.; Pages, S.; Dugne, O.; Podor, R.

    2015-07-01

    Powders and divided solid materials are widely represented as finished or intermediary products in industries as widely varied as foodstuffs, cosmetics, construction, pharmaceuticals, electronic transmission, and energy. Their optimal use requires a mastery of the transformation process based on knowledge of the different phenomena concerned (sintering, chemical reactivity, purity, etc.). Their modelling and understanding need a prior acquisition of sets of data and characteristics which are more or less challenging to obtain. The goal of this study is to present the use of different physico-chemical characterization techniques adapted to uranium-containing powders analyzed either in a raw state or after a specific preparation (ionic polishing). The new developments touched on concern dimensional characterization techniques for grains and pores by image analysis, chemical surface characterization and powder chemical reactivity characterization. The examples discussed are from fabrication process materials used in the nuclear fuel cycle.