WorldWideScience

Sample records for superficial por moagem

  1. Obtenção do cermet Ni-ZrO2 por moagem de alta energia

    OpenAIRE

    Douglas Will Leite

    2010-01-01

    A obtenção do Cermet de níquel-zircônia via moagem de alta energia (Mechanical Alloying MA) foi estudado visando a preparação de anodos de células a combustível de óxido sólido (SOFC). O níquel metálico foi adicionado em três concentrações: 30, 40 e 50% em volume. As operações de moagem foram conduzidas em moinho vibratório de alta energia do tipo SPEX. Estudou-se a influência do tempo de moagem, a eficiência de aditivos para controle do processo, tipo e geometria dos potes de moagem. A infl...

  2. Characterization of high-energy milled alumina powders Caracterização de pós de alumina submetidos a moagem de alta energia

    Directory of Open Access Journals (Sweden)

    Roberto Tomasi

    1998-10-01

    Full Text Available The utilization of reactive high-energy milling has been reported for the synthesis of ceramic powders namely, metal oxides, carbides, borides, nitrides or mixtures of ceramics or ceramic and metal compounds. In this work, high-energy milling was used for reduction of alumina powders to nanometric particle size. The ceramic characteristics of the powders were analyzed in terms of the behavior during deagglomeration, compaction curves, sintering and microstructure characterization. It was observed that the high energy milling has strong effect in producing agglomeration of the nanosized powders. This effect is explained by the high-energy impact of the balls, which may fracture particles or just cause the particles compacting. In this case, strong agglomerates are produced. As the powder surface area increases, stronger agglomerates are produced.Tem sido amplamente divulgada a utilização da moagem reativa de alta energia para a síntese de pós cerâmicos de óxidos de metais, carbetos, boretos, nitretos ou misturas de compostos cerâmicos ou compostos cerâmicos e metálicos. Neste trabalho, a moagem de alta energia (não reativa foi utilizada para a redução de pós de alumina para partículas de dimensões nanométricas. As características cerâmicas dos pós obtidos foram analisadas a partir de resultados de comportamento durante a desaglomeração, curvas de densificação, sinterização e caracterização de microestrutura. Observou-se que a moagem de alta energia tem forte efeito de aglomeração dos pós com partículas em dimensões nanométricas. Esse efeito é explicado pelo impacto de alta energia das bolas, os quais podem fraturar as partículas ou apenas causar a compactação das mesmas. Nesse último caso, que sempre ocorre, são formados aglomerados de alta resistência. O aumento da área superficial do pó produz aglomerados mais resistentes.

  3. Trauma ocupacional por corpo estranho corneano superficial Occupational trauma due to superficial corneal foreign body

    Directory of Open Access Journals (Sweden)

    Vanessa Miroski Gerente

    2008-04-01

    Full Text Available OBJETIVO: Avaliar a epidemiologia do trauma ocular por corpo estranho superficial de córnea. MÉTODOS: Os pacientes atendidos no Pronto-Socorro da Universidade Federal de São Paulo entre abril e junho de 2005 que apresentaram corpo estranho superficial de córnea foram entrevistados. Foram avaliados: sexo, idade, profissão, registro legal do emprego, uso, disponibilidade e tipo de equipamentos de proteção utilizados e a fiscalização do seu uso. O conhecimento das complicações deste tipo de acidente também foi avaliado. Os resultados foram analisados com teste do qui quadrado ou teste de Fisher. RESULTADOS: Foram entrevistados 123 pacientes. Apenas 3 eram do sexo feminino e a idade média foi de 36 anos. A maioria destes traumas ocorreu no ambiente de trabalho (86,2% e 58,4% não possuíam registro legal do emprego. As profissões mais freqüentemente envolvidas foram serralheiro, pedreiro e metalúrgico. Em 79,8% dos locais de trabalho havia equipamentos de proteção e 85,3% dos pacientes eram orientados a usá-los. Em 52,4% dos locais sua utilização era fiscalizada, mas apenas 34,2% usavam no momento do trauma. A utilização foi mais freqüente (p=0,008 e fiscalização mais presente (p=0,0415 entre pacientes com registro legal de emprego. Questionados sobre os riscos, 68,9% dos pacientes tinham consciência das complicações graves deste tipo de acidente. CONCLUSÃO: A maioria dos pacientes tem conhecimento sobre a gravidade do trauma ocular e este tipo de lesão ocorre mesmo em locais com equipamentos de proteção disponíveis, alguns deles até durante o seu uso. Os dados sugerem que enfoque maior da prevenção deve ser na fiscalização e utilização de equipamentos adequados.PURPOSE: To evaluate the epidemiology of superficial corneal foreign body. METHODS: Patients who were seen at the Emergency Service of the Federal University of São Paulo, from April/05 to June/05, were screened and those with superficial corneal

  4. Superficies de segundo orden

    OpenAIRE

    Salazar Salazar, Luis Álvaro

    1987-01-01

    Este trabajo se propone poner al alcance de estudiantes de primeros semestres de carreras de aplicación de la matemática, un algoritmo proporcionado por el álgebra lineal, para tratar con mas generalidad, agilidad y libertad unos objetos de la geometría analítica de no fácil manipulación por otros métodos y que se conocen como superficies de segundo orden o superficies cuádricas. En este orden de ideas, el autor considera importante que con este tratamiento se incluya este tema en una asignat...

  5. Análise da qualidade superficial e dimensional em peças produzidas por modelagem por deposição de material fundido (FDM

    Directory of Open Access Journals (Sweden)

    Carlos Henrique Pereira Mello

    2010-08-01

    Full Text Available A prototipagem rápida vem crescendo cada vez mais como uma opção na busca de redução do tempo e dos riscos no processo de desenvolvimento de produtos. Contudo, as peças produzidas por modelagem por deposição de material fundido (FDM podem sofrer variações na rugosidade e precisão dimensional, dependendo de parâmetros como espessura do filete depositado, sentido da orientação da fabricação da peça, tipo de deposição de camada e geometria do corpo de prova. A literatura é rica em trabalhos dessa natureza a respeito de protótipos rápidos produzidos por outras tecnologias de prototipagem, mas o mesmo não acontece com o FDM. Portanto, a presente pesquisa busca analisar a qualidade superficial e dimensional de protótipos rápidos produzidos com a tecnologia de FDM, por meio de um projeto experimental. De acordo com os dados analisados, foi possível afirmar que algumas variáveis selecionadas como fator principal, ou a interação entre elas, tiveram efeito sobre a resposta rugosidade e nenhum efeito sobre a resposta precisão dimensional. Conclui-se que, na produção de protótipos onde o acabamento superficial for importante, cuidados devem ser tomados na especificação dos parâmetros da máquina, uma vez que a rugosidade da peça final prototipada vai depender fortemente da interação entre os mesmos.

  6. Desarrollo de métodos para la evaluación integrada de propiedades mecánicas y superficiales inducidas en materiales metálicos mediante tratamiento superficial por ondas de choque generadas por láser

    OpenAIRE

    Ruiz de Lara de Luis, Leonardo

    2016-01-01

    El tratamiento superficial por ondas de choque generadas por láser, LSP, es una técnica cuyo principal objetivo es el de la modificación del estado tensional de las primeras micras en profundidad de materiales metálicos. En sus comienzos está técnica fue empleada para inducir tensiones residuales de compresión en superficie, pero mientras se avanzaba en su desarrollo se empezaron a observar otros efectos. Profundizando en ellos se llega a la conclusión de que existe una fuerte relación entre ...

  7. Digestibilidade dos nutrientes e parâmetros ruminais de bovinos de corte alimentados com rações contendo bagaço de cana-de-açúcar obtido pelo método de extração por difusão ou por moagem convencional Digestibility of nutrients and ruminal characteristics in beef cattle fed rations containing sugarcane bagasse obtained by diffusion or conventional milling extraction method

    Directory of Open Access Journals (Sweden)

    Mário Márcio Arakaki Rabelo

    2008-09-01

    Full Text Available Objetivou-se com este trabalho avaliar o efeito da utilização do bagaço de cana-de-açúcar in natura (BIN, obtido pelo método de extração do açúcar por difusão (BINdif ou moagem convencional (BINmoa como fonte de fibra íntegra, associado ao bagaço tratado sob pressão e vapor (BTPV sobre a digestibilidade dos nutrientes e os parâmetros ruminais de bovinos de corte. Quatro machos da raça Nelore, não-castrados, com fístulas ruminais e peso vivo médio inicial de 380 kg, foram distribuídos em delineamento experimental quadrado latino 4 × 4. Os tratamentos foram compostos das combinações dos bagaços: 5% BINmoa + 45% BTPV; 5% BINdif + 45% BTPV; 10% BINdif + 40% BTPV; 15% BINdif + 35% BTPV. A utilização do BIN obtido por difusão, mesmo no nível mais elevado, não teve efeito sobre a digestibilidade dos nutrientes (MS, MO, PB, FDN, FDA e EE da dieta. Entretanto, o fornecimento do bagaço obtido por difusão provocou redução nos consumos de MS, MO, PB e FDN em relação ao bagaço obtido por moagem. A produção total de ácidos graxos voláteis no rúmen, a porcentagem molar dos ácidos acético, propiônico e butírico, a relação acético/propiônico, o pH ruminal e a concentração ruminal de nirogênio amoniacal não diferiram entre os bagaços fornecidos. A utilização do bagaço obtido pelo processo de difusão ou de moagem convencional como fonte de fibra íntegra associado ao bagaço tratado sob pressão e vapor não prejudicou a digestibilidade dos nutrientes e os parâmetros ruminais de bovinos de corte alimentados com rações contendo 50% de concentrado.The objective of this study was to evaluate the effects of feeding sugarcane bagasse, obtained by extraction of sugar using diffusion (BINdif or conventional milling (BINmoa method, as a fiber source associated with bagasse treated under pressure and steam (BTPV on nutrient digestibility and ruminal characteristics in beef cattle. Four Nellore young bulls (380 kg

  8. Recobrimentos de poli (tereftalato de etileno depositados em aço por aspersão térmica a partir de pós obtidos em diferentes condições de moagem Thermally sprayed coated carbon steel produced using PET powder obtained in different grinding conditions

    Directory of Open Access Journals (Sweden)

    Luciana Tavares Duarte

    2003-07-01

    Full Text Available Neste trabalho foram analisados recobrimentos de poli(tereftalato de etileno, PET, depositados em aço carbono através da técnica de aspersão térmica à combustão, e produzidos a partir de pós oriundos de processos de moagem, em moinho de bolas e de facas, de garrafas de PET pós-consumo. Algumas condições de moagem foram testadas, tendo-se obtido pós com diferentes características morfológicas. As características morfológicas dos pós e dos recobrimentos foram avaliadas por microscopia óptica e eletrônica, tendo-se observado que o recobrimento apresentava bolhas, provavelmente devido à degradação do polímero. Além disto, os recobrimentos produzidos, bem como as amostras de pó, foram caracterizados por espectroscopia na região do infravermelho, por calorimetria exploratória diferencial e através da determinação de viscosidade intrínseca em solução. Os resultados obtidos mostraram que é possível a produção de aço carbono recoberto com PET através da técnica de aspersão térmica, sendo que o grau de degradação, a morfologia e a distribuição granulométrica dos pós utilizados influenciaram significativamente as características e propriedades dos recobrimentos formados.The main purpose of this work was to study the production of a thermal spray coated poly(ethyleneterephthalate steel. Poly(ethylene terephthalate coatings were made of a thin grinding waste produced by a PET recycling company, and of a PET powder, which was obtained by grinding post-consumer beverage bottles. Some grinding conditions, using a ceramic ball mill, were studied. Scanning Electronic Microscopy (SEM and optical microscopy (OM were used in the study of powder and coating morphologies, and this analysis showed that PET coating presents bubbles due to polymer degradation. PET powder and coating characteristics were investigated using Differential Scanning Calorimetry (DSC and measurements of intrinsic viscosity. It was observed that

  9. Evaluación de la oxidación superficial de recubrimientos de Ti6Al4V obtenidos por recubrimiento por láser

    Directory of Open Access Journals (Sweden)

    Candel, J. J.

    2010-12-01

    Full Text Available It has been studied the influence of processing parameters on the superficial oxidation and mechanical properties of different coatings of Ti6Al4V. The high chemical reactivity of titanium powder, and the high temperature reached during laser processing, produces a great variety of colors in the oxides formed. This oxidation can have a detrimental effect on the behavior in service so that its evaluation is essential. Although the influence of processing on the color of the oxides formed is clear, there is no simple relationship to explain its mechanical properties. For this reason it has been applied a methodology based on microscopy, microanalysis wavelength spectroscopy (WDS and nanoindentation. The results indicate no significant differences in hardness and elastic modulus between two coatings with different colors of oxidation.

    Se ha estudiado la influencia de los parámetros de procesado sobre la oxidación superficial y propiedades mecánicas de diferentes recubrimientos de Ti6Al4V. La gran reactividad química del polvo de titanio junto a la elevada temperatura que se alcanza producen gran variedad de colores en los óxidos formados. Esta oxidación puede tener un efecto perjudicial sobre el comportamiento en servicio, por lo que su evaluación es fundamental. Aunque la influencia del procesado en el color de los óxidos formados es clara, no existe una relación sencilla que explique sus propiedades mecánicas. Por ese motivo se ha seguido una metodología basada en la microscopia, microanálisis por espectroscopia de longitud de onda (WDS y nanoindentación. Los resultados indican que no hay diferencias importantes en la dureza y módulo elástico entre dos recubrimientos que presentan diferentes colores de oxidación.

  10. Superficie Específica y Estado Vital de la Materia

    OpenAIRE

    J. Hernando Ordoñez

    1992-01-01

    Se propone reemplazar el término de materia viva por el de estado vital de la materia por considerarlo adecuado, pues la materia es la misma, lo que cambia es su estado. Se estudia la relación entre la superficie específica y el estado vital de la materia. Constante del estado vital y el valor crítico de la superficie específica. Qué es la fuerza de inducción vital? Diferenciación funcional de las células. Cómo regula la unidad biológica su superficie específica? La materia que piens...

  11. Desempeño del riego por superficie en el área de riego del Río Mendoza

    OpenAIRE

    Morábito, José

    2003-01-01

    El sector riego representa en Argentina el 70% de todas las extracciones para uso del agua y tiene una eficiencia promedio del 40%, que resulta baja. Entre otros motivos, esto se debe principalmente al predominio de los métodos de riego por escurrimiento superficial sobre aquellos más modernos. Un síntoma de esta ineficiencia generalizada se manifiesta en el hecho de que de los 1,6 millones de hectáreas bajo riego que hay en el país, un tercio tiene problemas de salinización de suelo y/o de d...

  12. Corte y sellado reversible de dientes para obtener superficies internas de esmalte incólumes

    Directory of Open Access Journals (Sweden)

    Ana Milena Santiago-Medina

    2015-07-01

    Full Text Available Las superficies internas de los dientes, que se obtienen por cortes con discos, están generalmente desorganizadas por los giros, la velocidad y la rugosidad del disco. El calor altera la superficie y el agua de la refrigeración la composición química porque disuelve los componentes. En estudios de difusión, el perfil se borra por el corte, lo que anula resultados. Objetivo: desarrollar un método de sellado de superficies internas, ya cortadas antes de los ensayos de difusión, sin dejar trazas químicas o partículas. Materiales y metedos: se probó in vitro la habilidad de cuatro materiales de sellado con 40 especimenes, provenientes de 20 coronas de terceros molares, cortadas sagitalmente. Los especímenes se distribuyeron aleatoriamente en cuatro grupos (n = 10: G1: Teflón (Topex®, G2: Tela de caucho (Dental DAM®, G3: película de cloruro de polivinilo (Vinilpel® y G4: Cinta aislante (Tesa®. Se usó una solución de azul de metileno (AM al 2% por 6 días como indicadora de filtración. Por observación visual de cada muestra, se le asignó un valor (sí o no dependiendo de la presencia o ausencia de cualquier punto MB sobre la superficie de sellado. Los resultados fueron analizados siguiendo un modelo estadístico de respuesta binomial. Resultados: Siguiendo los procedimientos descritos, el teflón es el único material que previene la filtración de AM en la superficie interna expuesta por el corte. Conclusión: Se propone un protocolo de sellado reversible de las superficies internas con teflón, previo al corte de los dientes, para no alterar los resultados experimentales.

  13. MARCADO CON LÁSER SOBRE CERÁMICA VIDRIADA POR APORTE SUPERFICIAL DE UN PIGMENTO DE COBALTO

    Directory of Open Access Journals (Sweden)

    Maryory Astrid Gómez

    2008-07-01

    Full Text Available El procesamiento de materiales por láser tiene gran aplicación a escala industrial, para imprimir patrones gráficos sobre superficies cerámicas. La rápida implementación de este proceso se debe a que, respecto al proceso convencional de horneado, tiene ventajas tales como: se concentra el calor sólo en la zona irradiada, lo que conlleva un menor consumo de energía sin afectar significativamente el resto de la pieza; se obtienen patrones gráficos de alta resolución espacial; permite introducir cambios durante el proceso sin requerir largas paradas, y la generación de residuos es mínima o casi nula. En este estudio se presentan los resultados obtenidos en el vidriado con láser Nd:YAG (λ&=1064 nm sobre las superficies esmaltadas de azulejos, las cuales fueron previamente recubiertas con pigmento negro de cobalto. Con el láser operando en modo continuo (CW, se marcaron una serie de líneas, cuyo ancho y profundidad evidenciaron una dependencia directa con la variación de la potencia y velocidad de desplazamiento del haz láser sobre la superficie del azulejo. Estas líneas vidriadas fueron finalmente caracterizadas por microscopía óptica, espectroscopia de dispersión de energía (EDS y difracción de rayos X.Laser materials processing has great application to industrial scale, to print graphic patterns on ceramics surfaces. The fast implementation of this process is due to the fact that, with respect to the conventional baking process, has advantages, such as: heat is concentrated only in the radiated zone that involves a smaller energy consumption without affecting significantly the rest of the piece, graphic patterns with of highly spatial resolution are obtained, it permits to introduce changes during the process without requiring long stops, and low or almost none generation of residues. In this study the results obtained from Nd:YAG (λ=1064 nm laser glazing on the enameled surfaces of glazed tiles, which were previously

  14. Bacterias en superficies contactadas durante las tomas radiográficas intraorales

    OpenAIRE

    Lee, Guihan; Calderón-Ubaquí, Victor; Sacsaquispe-Contreras, Sonia

    2016-01-01

    Objetivo: Determinar la presencia de bacterias mediante el análisis microbiológico en las superficies contactadas por el operador durante la toma y procesado de radiografías intraorales en diferentes momentos del día en el Servicio de Radiología Oral de la UPCH. Materiales y métodos: Se realizó un muestreo en nueve superficies del servicio de radiología oral. Las muestras se tomaron en dos momentos por el mismo investigador; al inicio y al finalizar las actividades en el servicio, se realizó ...

  15. Método de ecuación por patrones para la solución de scattering electromagnético por partículas axialmente simétricas con impedancia de superficie anisotrópica compleja

    Directory of Open Access Journals (Sweden)

    Alexander G. Kyurkchan

    2013-04-01

    Full Text Available El método de la ecuaciones de patrón (PEM han sido extendidospara resolver problemas de scattering en ondas electromagnéticas por medio de partículas con superficie de impedancia mista anisotrópica. Luego, las condiciones de frontera de impedancia anisotrópica se imponen en la superficie lateral de la partícula, y condiciones de frontera de impedancia isotrópica se imponen en caras finales de la partícula. El método se formula para cuerpos axialmente simétricos.Se presentan las características del scattering de los cuerpos con superficies laterales artificiales suaves y duras. Se lleva a cabo la comparación de los resultados con los que se obtienen con otros métodos. También se presenta el análisis de la tasa de convergencia del algoritmo numérico PEM y la precisión de los cálculos numéricos. Finalmente se hace la comparación de nuestros datos con los resultados numéricos obtenidos antes con el PEM en ausencia de la impedancia anisotrópica.

  16. Radiación acústica por superficies planas: Aplicación a altavoces

    OpenAIRE

    Alba, Jesús; Ramis, Jaime; Espinosa, Víctor; Sánchez, Víctor

    2003-01-01

    En los sistemas de reproducción sonora es habitual la utilización de altavoces dinámicos. Sin embargo, en aplicaciones específicas, puede ser necesaria y/o conveniente la utilización de altavoces alternativos con superficies planas como diafragma, como los electrostáticos o los basados en la tecnología NXT© . Estos altavoces generan el campo acústico mediante la vibración de una superficie rectangular. Se puede suponer, en una primera aproximación, que todos los puntos sobre su su...

  17. Avaliação da dureza superficial de cimentos de ionômero de vidro reforçados por nanotubos de carbono

    Directory of Open Access Journals (Sweden)

    Mayra Manoella Perez Reis dos Santos

    Full Text Available Introdução Os cimentos de ionômero de vidro (CIV são materiais com baixa resistência à tração e ao cisalhamento, mostrando-se, portanto, contraindicados para áreas sujeitas às grandes cargas oclusais. Objetivo Avaliar o efeito da incorporação de nanotubos de carbono em CIV por meio de dureza superficial Knoop. Material e método Foram confeccionados 48 espécimes, divididos em quatro grupos, de acordo com o tipo de CIV (n=12 – convencional ou de alta viscosidade, incorporados ou não de nanotubos de carbono (NC a 2%: (A Vidrion R; (B Vidrion R + NC 2%; (C Vitro Molar, e (D Vitro Molar + NC 2%. Os espécimes foram preparados utilizando-se seringa Centrix, para inserção do material em moldes plásticos, e armazenados em água deionizada por 24 horas. Após polimento, realizou-se o teste de dureza superficial com penetrador do tipo Knoop. Foram realizadas cinco endentações em cada espécime, distanciadas entre si em 100 µm. Resultado Os valores médios de dureza foram 58,96 ± 8,29 (A, 34,81 ± 5,78 (B, 60,84 ± 4,91 (C e 41,97 ± 5,45 (D. O teste ANOVA detectou diferenças estatisticamente significantes para os dois parâmetros estudados, tipo de material (p=0,016 e inclusão de NC (p0,05, enquanto os grupos B e D apresentaram diferenças significativas (p<0,05. Ao comparar o fator incorporação ou não de NC, observou-se diferença significativa entre os grupos A e B, e entre os grupos C e D (p<0,05. Conclusão A incorporação de nanotubos de carbono influenciou negativamente os valores de dureza superficial para os dois tipos de CIV utilizados.

  18. Análisis de la influencia del factor de solapamiento en el tratamiento térmico de superficies extensas de aceros por láser

    Directory of Open Access Journals (Sweden)

    García-Beltrán, A.

    2007-08-01

    Full Text Available On the basis of numerical models developed by the authors for the predictive analysis of transformation hardening of extended steel surfaces, the difficulties existing for the treatment of extended surfaces by overlapping cycles of laser heating are analyzed from a computational point of view. In this analysis, thermal and physical properties of the material are considered along with their temperature dependance. Some optimization guidelines for the irradiation parameters (including modifications of the spatial distribution of the laser beam energy are determined in order to obtain both the adequate material transformed depth and the required hardness profiles.

    Sobre la base de modelos numéricos, desarrollados por los autores para el análisis predictivo de procesos de tratamiento térmico superficial de aceros por láser, se analiza, desde un punto de vista computacional, la influencia del factor de solapamiento en el tratamiento de superficies extensas de dichos materiales mediante ciclos parcialmente superpuestos de irradiación láser. En dichos análisis, se tienen en cuenta, explícitamente, las propiedades termofísicas de los materiales considerados así como su dependencia térmica, estableciéndose, finalmente, diversos criterios de optimización de las variables de irradiación (incluyendo posibles variaciones en la distribución espacial de la energía del haz láser con el objeto de maximizar, de forma combinada, la profundidad de material transformado y el nivel de dureza alcanzado, evitando, al mismo tiempo, el sometimiento del material a ciclos térmicos degradatorios del tratamiento original, en concreto, el revenido superficial.

  19. Modelos de mantenimiento y reemplazo de equipos en mineria superficial

    OpenAIRE

    Llanque Maquera, Oscar Eloy; Llanque Maquera, Oscar Eloy

    1999-01-01

    El mantenimiento y reemplazamiento de equipos en Minería Superficie tiene una gran importada por el mismo hecho que se mueven volumen de material y por las altas inversiones hechas en maquinaria, a su vez por la influencia en los costos de operación. Por tal razón es el interés en desarrollar los modelos de mantenimiento y reemplazamiento de equipos en minería e implemento el mantenimiento predictivo, como una actividad complementaria a los mantenimientos que se realizan comúnmente como son p...

  20. Tratamiento de algunas dermatosis por los rayos X de bucky: desarrollo histórico de la radioterapia superficial

    Directory of Open Access Journals (Sweden)

    Gonzalo Reyes Garcia

    1940-11-01

    En los primeros años la Roentgenterapia, puso todo su interés en las reacciones cutáneas. Hasta el año de 1902, se trataron únicamente afecciones de la piel, sin buscar ningún efecto sobre los órganos profundos. Más tarde, Sinns, hacía publicaciones sobre la influencia de los rayos en la leucemia y poco a poco, con el perfeccionamiento de los aparatos y el aumento del voltaje, se fue desarrollando la radioterapia profunda, sobre todo en las afecciones cancerosas y otras de los órganos situados profunda mente; al mismo tiempo, se fueron fijando las técnicas y aplicaciones de la terapia superficial y se observaban las lesiones producidas por los rayos en la piel, tales como: atrofias, telangiectasis, úlceras renguenianas, eritemas, pigmentaciones, etc.

  1. Superficies de titanio en implantes dentales de carga inmediata

    OpenAIRE

    Aparicio, C.; Padrós, A.; Planell Estany, Josep Anton; Gil, F.J.

    2008-01-01

    Se ha obtenido una capa de fosfato de calcio del mismo contenido mineral que el hueso en la superficie del implante dental de titanio, que tiene como consecuencia una muy rápida y eficaz osteointegración. Esta capa se ha obtenido mediante un método biomimético por vía termoquímica. La capa se une al substrato por enlace químico. Este hecho evita todos los inconvenientes de los métodos de recubrimiento convencionales (plasma spray, ablación láser...) cuya unión es por interacción mecánica, lo ...

  2. El agrietamiento superficial de las pastas puras de cemento: una interpretación

    Directory of Open Access Journals (Sweden)

    Calleja, J.

    1964-12-01

    Full Text Available Not availableSe aborda por métodos analíticos y técnicas de difracción de rayos X el problema de determinar las posibles causas del agrietamiento superficial de galletas de pasta pura de cemento. Se encuentran diferencias de composición y constitución entre la zona superficial agrietada de las galletas y el resto de la masa, hallándose concordancia entre determinados constituyentes químicos calculados a base del análisis químico y los resultados de difracción de rayos X. Se interpretan estas diferencias como atribuibles a una exudación de lechada de la pasta, con extracción de álcalis solubles y yeso. Como consecuencia, la exudación provoca una carbonatación, una mayor retracción y posiblemente un fraguado acelerado en la zona superficial en relación con la masa interior de las galletas. Como causa directa de la ·exudación se acepta la hipótesis de una granulometría anormal del cemento, probablemente debida a un exceso de finos o gruesos por una molienda grosera, y producida por una deficiencia de tipo mecánico en el proceso de molturación del clínker.

  3. Masaje circulatorio superficial en la enfermedad arterial periférica

    OpenAIRE

    Cebrià Iranzo, M. Àngels

    2010-01-01

    En la enfermedad arterial periférica crónica se indica el masaje circulatorio superficial por producir una vasodilatación refleja en las zonas afectadas. Este masaje manual tiene dos objetivos fundamentales: 1) Favorecer la vasodilatación refleja e hiperemia local; 2) Drenar el retorno vascular sanguíneo y linfático.

  4. Produtividade e qualidade fisiológica de sementes de aveia preta em função da calagem superficial em plantio direto = Black oat yield and seed physiologic quality under superficial lime application in no tillage system

    Directory of Open Access Journals (Sweden)

    Tiago Roque Benetoli da Silva

    2006-04-01

    Full Text Available Com o objetivo de avaliar a produtividade e a qualidade fisiológica de sementes de aveia preta em razão da aplicação superficial de calcário em plantio direto, foi realizado um experimento em Botucatu, Estado de São Paulo, sob condições de sequeiro. O delineamento experimental foi o de blocos casualizados, com quatro repetições, em que os tratamentos foram constituídos por aplicação superficial de doses de calcário dolomítico (D0 = zero – sem aplicação de calcário; D1 = 1,8 t ha-1 – quantidade de calcário para elevar a saturação por bases a 54%; D2 = 3,6 t ha-1 – quantidade de calcário para elevar a saturação por bases a 68% e D3 = 5,4 t ha-1 – quantidade de calcário para elevar a saturação por bases a 80%, realizada em outubro de 2002. A cultura da aveia preta, cultivar Comum, foi semeada em abril de 2004, no segundo ano após a rotação milheto (primavera, feijão (verão e aveia preta (outono e inverno. Com os resultados obtidos, observou-se ganho de produtividade com a aplicação superficial de calcário, porém sem influenciar a qualidade fisiológica das sementes de aveia preta.The experiment carried out in Botucatu, São Paulo State, Brazil, in dry conditions, aiming to evaluate the yield and physiologic quality of black oat seeds, under superficial liming in no tillage system. A randomized complete block design was used, with four replications. The treatments were superficial application of different dolomitic lime rates (R0 = zero – without lime; R1 = 1.8 t ha-1 – lime to increase the base saturation at 54%; R2 = 3.6 t ha-1 – lime to increase the base saturation at 68%, and R3 = 5.4 t ha-1 – lime to increase the base saturation at 80%, in October 2002. The blackoat Common cultivar was sowed in April 2004, in second year, after the crop rotation of millet (spring, common bean (summer, black oat (autumn/winter. The results showed that the black oat physiologic quality seed was not affected by

  5. Estudio del comportamiento in vitro de osteoblastos cultivados sobre superficies de implantes dentales.

    OpenAIRE

    Velázquez Cayón, Rocío Trinidad

    2015-01-01

    La osteointegración es el proceso por el cual se produce una fijación rígida de material aloplástico, clínicamente asintomática, es conseguida y mantenida en hueso durante una carga funciona. En este proceso el papel principal está representado por los osteoblastos, células diferenciadas que sintetizan el colágeno y la sustancia fundamental ósea. Los osteoblastos tienen dos destinos posibles: ser rodeados por la matriz ósea que producen y pasan a ser osteocitos o permanecer en la superfici...

  6. Superficial biopsy of the cervix: new technique

    Directory of Open Access Journals (Sweden)

    Ettore De Girolami

    2002-06-01

    Full Text Available Cytological examination of the cervix in all patients is considered a necessity. A new technique of superficial biopsy is described and advantages en. numeratedEl Autor presenta una nueva técnica para biopsia superficial, considerando la necesidad de hacer rutinariamente a todas las pacientes el examen citológico del cérvix. La muestra se toma con el extremo de un aplicador cubierto de gaza. Este dispositivo, humedecido previamente en una solución de etanol, metanol y éter etílico, se aplica inmediatamente al cérvix del útero y, dándole un movimiento como el de las manecillas del reloj, se toma la muestra con la que se hacen frotis por aposición que se colorean por el método de Giemsa. Esta técnica ofrece la ventaja de que el tejido en estudio se adhiere perfectamente a la gaza, la cual, con el movimiento de rotación, desprende las células del "os uteri", las que son fijadas al mismo tiempo. La preparación del dispositivo es sumamente sencilla. La prueba resulta de bajo costo como de breve y fácil realizaciónL' Autore prende in considerazione l'utilitá dell' esame citologico del collo dell'utero, fatto rutinariamente a tutte le pazienti. Si descrive una nuova tecnica di biopsia superficiale che oltfe ad offrire dei vantaggi é di poca spesa e si puó eseguire con facilitá ed in breve tempo

  7. ESTUDO DO ESCOAMENTO SUPERFICIAL NA BACIA HIDROGRÁFICA DO RIO IVAÍ, PARANÁ, BRASIL

    Directory of Open Access Journals (Sweden)

    Manoel Luiz dos Santos

    2014-03-01

    Full Text Available Mediante a  aplicação da equação proposta por Kirby (1976,  aliada a levantamento das variáveis físicas  da bacia do Ivaí, este trabalho se propõe a analisar o comportamento do escoamento superficial nessa importante bacia hidrográfica do estado do Paraná. Para tanto, foram levantadas as variáveis precipitação média anual, precipitação média por evento, capacidade de campo dos solos e evapotranspiração. Essas variáveis foram  espacializadas e analisadas com o suporte das características geológicas, geomorfológicas, pedológicas e climáticas da bacia hidrográfica. O resultado da análise foi integrado, em ambiente digital, em um Sistema de informação Geográfica, fornecendo uma carta síntese das taxas de escoamento superficial da bacia. O resultado mostra que no curso inferior da bacia hidrográfica, região do Arenito Caiuá (Kr, ocorrem as maiores taxas de escoamento superficial da bacia. Tal fato é atestado pela agressiva erosão que sofrem os solos desenvolvidos sobre estas litologias na região Noroeste do estado do Paraná.

  8. Comparação entre dois métodos para a determinação do volume de escoamento superficial

    Directory of Open Access Journals (Sweden)

    F. F. Pruski

    2001-06-01

    Full Text Available A determinação do volume máximo de escoamento superficial é fundamental para o dimensionamento de diversos tipos de obras hidráulicas, constituindo o parâmetro de maior importância no projeto de sistemas de terraceamento em nível. A determinação incorreta do volume escoado superficialmente gera imprecisões no dimensionamento destes sistemas que, quando superdimensionados, apresentam elevado custo de instalação. Tendo em vista esses aspectos, o presente trabalho teve por objetivo comparar os valores de volume máximo de escoamento superficial, obtidos por meio do método empírico do número da curva, desenvolvido pelo Serviço de Conservação de Solos dos Estados Unidos, com aqueles obtidos por meio do método desenvolvido por Pruski e colaboradores, baseado em princípios consagrados na hidrologia. O desempenho dos dois métodos foi analisado com base nas condições pluviométricas correspondentes a Belo Horizonte e Uberlândia, para período de retorno de 10 anos. Evidenciaram-se grandes diferenças entre os valores de volume de escoamento superficial obtidos pelos dois métodos, as quais se mostraram mais acentuadas para maiores velocidades de infiltração de água no solo, tendo o método proposto por Pruski e colaboradores apresentado comportamento mais condizente com a realidade.

  9. Utilización del método de superficie de respuesta para formular una base de banano (Musa AAA para batidos

    Directory of Open Access Journals (Sweden)

    Marta Gamboa White

    2010-06-01

    Full Text Available El Método de Superficie de Respuesta se utiliza para optimizar o reformular productos. Se usa principalmente para economizar dinero y reducir el tiempo de pruebas, al disminuir el número de ensayos. Se presenta la aplicación del Método de Superficie de Respuesta para desarrollar una base a partir de bananos (Musa AAA var. Cavendish cv. Gran Enano de rechazo de exportación a manera de caso para estudiar su uso. Por medio de una encuesta se identificó que el dulzor, espumosidad y sabor fueron los atributos que los consumidores consideraron más importantes en un batido. Con base en estos atributos y con los ingredientes: pulpa de banano, goma guar y azúcar, se elaboraron y seleccionaron varias mezclas base, que fueron degustadas, en forma de batidos en leche, por un grupo de 90 consumidores. Por medio del diseño de superficie de respuesta se determinó que el batido con la mayor aceptación estuvo constituido por un 77,0 % de leche y un 23,0 % de mezcla base, compuesta esta última por 0,12 % de goma guar, 80,50 % de pulpa de banano y un 19,50 % de azúcar. Un Análisis de Componentes Principales permitió determinar que el contenido de sacarosa, que define el grado de dulzor, fue el atributo más importante para la aceptación del batido y se demostró que la combinación del Método de Superficie de Respuesta con el Análisis de Componentes Principales constituyó una herramienta útil en la formulación y optimización de productos, sobre todo para entender la interrelación de las variables.

  10. Modelamiento de la cinética de desinfección superficial de tomates (Lycopersicum esculentum frescos usando soluciones de cloro

    Directory of Open Access Journals (Sweden)

    Miguel Ángel Solano Cornejo

    2013-01-01

    Full Text Available Tomates frescos variedad italiana fueron sometidos a procesos de desinfección superficial utilizando soluciones de h ipoclorito de c alcio para determinar su eficiencia germicida y la cinética que gobierna el proceso de inactivación superficial en gérmenes a erobios mesófilos, levaduras y mohos. El cloro como desinfectante superficial fue eficaz contra bacterias aerobias mesófilas, levaduras y mohos en ese orden, la resistencia de los gérmenes aerobios mesófilos, de las levaduras y de los mohos expresados en s us valores z cloro fue de 455, 500 y 625 ppm respectivamente. Los gérmenes aerobios mesófilos presentes en la superficie del tomate muestran una mayor resistencia a la desinfección por c loro conforme el tiempo de contacto germen - cáscara es mayor, debido a u na mayor adherencia a la cáscara lo que dificulta la acción de c loro sobre los gérmenes; esté efecto no se presentó en el caso de l evaduras ni de m ohos . Los valores D cloro 20ºC experimentales y los valores D cloro 20ºC predichos por el P rimer M odelo de Bige low se ajustaron con una correlación de entre 0 , 91 y 0 , 99. Los valores z cloro experimentales y los v alores z cloro predichos por el S egundo Modelo de Bigelow se ajustaron con una correlación de 0 , 72 a 0 , 86. La variabilidad en los valores z cloro se debió a que los gérmenes analizados para validar el m odelo propuesto estuvieron compuestos por diversos géneros. Así , el Método de Bigelow aplicado a la cinética de inactivación superficial con c loro fue validado.

  11. Estruturas de governança interna e a capacidade de inovação em pequenas firmas brasileiras de torrefação e moagem de café

    Directory of Open Access Journals (Sweden)

    Gabriela Feresin Jardim

    2013-06-01

    Full Text Available Na pesquisa relatada neste artigo são investigadas quais as combinações de estruturas de governança interna (mercado, burocrática e comunitária que possibilitam mais capacidade de inovação de produto nas pequenas firmas. Neste estudo, inspirado nos trabalhos de Grandori e Furnari (2008; 2010, tem-se como hipótese que a capacidade de inovação ocorre de modo mais consistente nas firmas que adotam uma estrutura de governança interna multimodal. Essa hipótese foi testada por meio de um survey com 80 indústrias brasileiras de torrefação e moagem de café(1. Para encontrar as combinações de estruturas, foi utilizada a análise comparativa qualitativa (QCA no software fs/QCA versão 2.0 (RAGIN, 2008. Como resultado, verificou-se que a estrutura de governança interna multimodal - que combina práticas de incentivos monetários, burocráticas e comunitárias - apresentou resultados mais consistentes para a inovação das pequenas firmas de torrefação. Esses resultados, ao permitirem identificar os requisitos organizacionais que produzem mais possibilidades de inovação, podem ajudar a traçar ações de políticas públicas e privadas para as empresas brasileiras, de modo a melhorar sua taxa de inovação e a competitividade em seus mercados.

  12. Changes in suspension properties of structural modified montmorillonites Mudanças em propriedades de suspensões de montmorilonitas modificadas estruturalmente

    Directory of Open Access Journals (Sweden)

    C. Volzone

    2001-03-01

    Full Text Available Rheological changes were found in smectite (Wyoming- and Cheto-type montmorillonites suspensions after structural modifications. The effect of the particle size and Na+ exchange on the flow curves of 6% wt/wt suspensions of smectites with and without Na2CO3 were examined. Mineralogical, structural and physicochemical characteristics were studied by X-ray diffraction (XRD, infrared spectroscopy (IR, cationic exchange capacity (CEC, Mg2+, Al3+ determinations, particle size distribution and swelling index (SI. Grinding in an oscillating mill modified the particle sizes. The montmorillonite grain size and the structural disorder increased after larger grinding times. The grinding treatment modified the apparent viscosity and the yield stress of the montmorillonite suspensions. The homoionic Na Cheto-type montmorillonite with fine particle size (obtained by grinding increased the flow properties. Nevertheless, rheological properties were lower than those of suspensions of the Wyoming-type montmorillonite. Montmorillonite-types reacted differently with Na2CO3 additions and this behavior may be related to their structural composition. The Na2CO3 activation improved the flow properties of the original Wyoming-type montmorillonite and after 30 s grinding.Foram encontradas mudanças reológicas em suspensões de esmectitas (montmorillonitas tipos Wyoming e Cheto após modificações estruturais. Foi examinado o efeito do tamanho de partícula e troca de Na+ nas curvas de escoamento de suspensões de esmectitas 6% peso com e sem Na2CO3. As características mineralógicas, estructurais e físico-químicas foram estudadas por difração de raios X (DRX, espectroscopia no infravermelho (IV, capacidade de troca catiônica (CTC, determinações de Mg2+ e Al3+, de distribuição de tamanho de partículas e de índice de expansão (swelling index - SI. Moagem em moinho oscilatório modificou o tamanho das partículas. O tamanho de grão da montmorillonita e a

  13. Análisis por microscopía electroquímica de barrido de superficies electroactivas y desarrollo-caracterización de electrodos basados en un tejido de fibra de carbono

    OpenAIRE

    FERNÁNDEZ SÁEZ, JAVIER

    2014-01-01

    Una parte importante del trabajo desarrollado en la presente tesis está basado en la puesta a punto y aplicación de la técnica de la microscopía electroquímica de barrido (SECM). Con esta técnica se han caracterizado electroquímicamente superficies sobre las que se han sintetizado una serie de materiales electroactivos desarrollados por nuestro grupo de investigación. Dichos materiales se sintetizan sobre diferentes substratos con el fin de disponer de electrodos de trabajo con aplicación en ...

  14. Desgaste por deslizamiento en seco de aceros perlíticos y bainíticos

    Directory of Open Access Journals (Sweden)

    Cristian Camilo Viáfara Arango

    2004-01-01

    Full Text Available El desgaste por deslizamiento tiene una gran influencia sobre el desempeño de los sistemas rueda-riel, en particular, por el deslizamiento de la pestaña de la rueda sobre la parte interna del riel en una pista curva. Dado que el deslizamiento entre la rueda y el riel involucra efectos de adhesión, altos porcentajes de deslizamiento/rodadura afectan fuertemente el desgaste por fatiga de contacto por rodadura, que actúa en las superficies de contacto. En una máquina Pin sobre Disco se llevaron a cabo ensayos de desgaste por deslizamiento para estudiar el comportamiento del acero perlítico AISI 1070 y el bainítico AISI 15B30. La velocidad de deslizamiento fue 1 ms-1 para todas las pruebas y se utilizaron cargas normales de 10, 30 y 50 N. La resistencia al desgaste fue relacionada con la pérdida de masa medida después de las pruebas y las superficies desgastadas, al igual que las partículas removidas, fueron analizadas por medio de los microscopios óptico y electrónico. Se realizaron perfiles de microdureza bajo las superficies de contacto para analizar el efecto del endurecimiento por deformación. El acero perlítico mostró mayor resistencia al desgaste que el acero bainítico, debido al excelente comportamiento de endurecimiento por deformación de la perlita comparado con el de la bainita. En el acero perlítico se observaron regímenes de desgaste oxidativo, mientras que en el bainítico el principal mecanismo de remoción de material fue el adhesivo, llevando a un daño mucho más fuerte en la superficie. De hecho, el régimen de desgaste para las probetas bainíticas fue siempre severo, aún con la menor carga normal aplicada.

  15. Modificación superficial con láser de diodo de alta energía (HPDL de barreras térmicas de CaZrO3 depositadas por proyección térmica

    Directory of Open Access Journals (Sweden)

    Múnez, C. J.

    2007-08-01

    Full Text Available The aim of this investigation is to modify the surface of thermal sprayed CaZrO3 coatings to reduce their porosity and improve their properties. A high power diode laser was used to produce the melting of the superficial ceramic coating. Different parameters have been evaluated in the process, in particular laser beam power/energy and the laser scanning speed. Microstructural changes induced by the laser treatment were evaluated by light microscopy and environmental scanning electron microscopy. The coatings were also characterized by X ray diffraction in order to detect the possible phase transformations.

    Esta investigación ha desarrollado tratamientos de modificación superficial sobre recubrimientos de CaZrO3 proyectados térmicamente, encaminados a mejorar su densificación y propiedades. Para la fusión de la superficie cerámica se ha utilizado un láser de diodo de alta energía, evaluando la influencia de parámetros como la potencia del haz láser y la velocidad de barrido sobre la superficie. Las microestructuras inducidas por el tratamiento láser se analizaron utilizando un microscopio óptico y un microscopio electrónico de barrido ambiental. Los recubrimientos también se caracterizaron mediante difracción de rayos X para detectar posibles cambios de fase.

  16. Superficial basal cell carcinoma: A comparison of superficial only subtype with superficial combined with other subtypes by age, sex and anatomic site in 3150 cases.

    Science.gov (United States)

    Pyne, John H; Myint, Esther; Barr, Elizabeth M; Clark, Simon P; David, Michael; Na, Renua; Hou, Ruihang

    2017-08-01

    Basal cell carcinoma (BCC) may present as superficial subtype alone (sBCC) or superficial combined with other subtypes. The objective of this study was to compare sBCC without or with other BCC subtypes by age, sex and anatomic site. We retrospectively collected superficial BCC with the above characteristics from an Australian center during 2009 to 2014. We recorded 1528 sBCC and 1622 superficial BCC combined with other BCC subtype cases. Males numbered 2007 and females 1140. On males, head sites (forehead, cheek, nose and ear combined) compared to limb plus trunk sites displayed a higher incidence of superficial BCC combined with either nodular and or aggressive BCC subtypes (OR 13.15 CI 95% 8.9-19.5 P < .0001). On females a similar comparison also found a higher incidence of superficial BCC combined with solid subtype BCC on head sites compared to trunk and limb sites (OR 9.66 CI 95% 5.8-16.1 P < .0001). Superficial BCC alone is more likely on younger females on trunk and limb sites. Small partial biopsies reported as sBCC may miss other BCC subtypes present with higher risk on facial sites for males and females. Males had smaller proportions of superficial only subtype BCC on facial and ear sites compared to females. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  17. Superficial skin ulcers

    International Nuclear Information System (INIS)

    Samaila, Modupeola O.; Rafindadi, Abdulmumini H.; Oluwole, Olabode P.; Adewuyi, Sunday A.

    2007-01-01

    Objective was to determine the underlying cause of superficial skin ulcers over a 15-year period. A retrospective histopathological analysis of 670 cases of superficial skin ulcers diagnosed in the Dept. of Pathology, Ahmadu Bello University Teaching Hospital, Zaria, Nigeria from January 1991 to December 2005. A total of 670 superficial skin ulcers were analyzed. The mail to female gender ratio was 409:261(1.5:1.0) and a peakage frequency of 44.3 %( 297) in the 5th and 6th decades. Spectrum of lesions encountered was categorized into inflammatory, infections, benign and malignant diseases. The malignant lesions were 309 (46.1%), non-specific inflammation 302 (45.1%), granulation tissue 25 (3.7%) and pseudoepitheliomatous hyperplasia 14 (2.1%). A total of 18(2.7%) specific infections were encountered, which included bacterial, fungal and viral infection. Benign lesions were 2(0.3%), comprising of neurofibroma and Bowen's disease. The most common malignant lesion was squamous cell carcinoma 203 (30.3%) with a male to female ratio of 128:75 (1.7:1.0). Of these 161 were well differentiated tumors. The lower limb was the prevalent site distribution of all the ulcers. Superficial ulcers may be harbinger of malignant diseases. Squamous cell carcinoma remains the most common malignant lesion arising from chronic superficial ulcers from our setting. Adequate tissue biopsy and early diagnosis may reduce the attendant morbidity of these ulcers. (author)

  18. Tratamientos de protección superficial de materiales de construcción por nuevos materiales híbridos organo-inorgánicos multifuncionales

    Directory of Open Access Journals (Sweden)

    Oteo, J. L.

    2006-04-01

    Full Text Available The behavior of an organic-inorganic hybrid material (HOI as protective coating of different building materials has been evaluated in this work. The mineralogical, structural and textural characterization of the inorganic building materials (granite, marble and sandstone was carried out by: x-ray diffraction (XRD, scanning electron microscopy (SEM, attenuated total reflectance (ATR and mercury porosimetry. On the other hand, the protective coating was characterized by ATR and SEM, evaluating its protective capacity against paintings made by aerograph or labeller, according to the greater or smaller facility whereupon eliminates the painting by means of cleaning with a cloth. The stability of the coating on the inorganic materials was studied by accelerated tests of rain and UV radiation. Color variation after coating was studied, in all the cases, by colorimetry.

    En este trabajo se presentan los resultados de las investigaciones llevadas a cabo para evaluar el comportamiento de un material híbrido orgánico-inorgánico (HOI como recubrimiento protector de distintos materiales de construcción. La caracterización mineralógica, estructural y textural de los materiales de construcción estudiados (granito, mármol y arenisca se llevó a cabo mediante las técnicas: difracción de rayos X (DRX, microscopía electrónica de barrido (MEB, reflectancia total atenuada (ATR y porosimetría de mercurio. Por otro lado, la caracterización del recubrimiento antivandálico se llevó a cabo mediante ATR y MEB, evaluando su capacidad protectora contra pinturas realizadas por aerógrafo o rotulador, según la mayor o menor facilidad con que se elimina la pintura por limpieza con gamuza. La estabilidad del recubrimiento en el material inorgánico se estudió mediante ensayos acelerados de resistencia a la lluvia y, en el caso del mármol, a la radiación UV. La variación del color experimentada por la superficie después de ser recubierta se estudi

  19. Estudio del modelo de desgaste propuesto por Archard

    Directory of Open Access Journals (Sweden)

    FABIO ALEXANDER SUÁREZ BUSTAMANTE

    2005-01-01

    Full Text Available El comportamiento de componentes de máquinas y de materiales necesita ser optimizado para reducir los costos de operación en las plantas industriales. Este hecho ha impulsado la Tribología, un área relacionada con el estudio de la fricción, la lubricación y el desgaste. Uno de los principales objetivos de esta área del conocimiento es elaborar modelos matemáticos para expresar la variación del desgaste durante el contacto de superficies en movimiento, con el fin de predecir la vida útil de los elementos de máquinas. El modelo de Archard para desgaste por deslizamiento en seco, formulado en 1953, es un modelo clásico que plantea una variación del desgaste inversamente proporcional a la dureza del material y directamente proporcional a la carga aplicada. En el presente trabajo, se ha utilizado el método de modelamiento de problemas físicos, propuesto por Asbhy, para analizar los modelos propuestos por Archard (Modelo de contactos múltiples en superficies rugosas y modelo de desgaste mecánico. Con base en él se ha podido realizar un análisis profundo a dichos modelos, mostrando un panorama más amplio del modelo de Archard; se discuten aspectos no mostrados en los textos y artículos de tribología, donde el tratamiento dado a este modelo resulta ser superficial, desconociendo las limitaciones y la perspectiva que tuvo Archard sobre los aspectos que deberían considerarse en un modelo de desgaste.

  20. Estimating peach palm fruit surface area using allometric relationships Estimativa da área superficial de frutos de pupunheira por relações alométricas

    Directory of Open Access Journals (Sweden)

    Marilene Leão Alves Bovi

    2002-12-01

    Full Text Available Fruit surface area is an important trait in studies of developmental physiology, as well as in entomological and phytopathological research, where damage caused by insects and/or microorganisms needs to be quantified. Nonetheless, direct measurement of this trait is difficult, not very precise and destructive. This study establishes allometric relationships to estimate the surface area of peach palm (Bactris gasipaes Kunth, Palmae fruits. Five fruits were harvested, at different maturation stages, from each of 18 plants. Image digitalization and edition methodology was adapted and compared with the traditional gravimetric method. Regression analysis and curve fitting were used to compare the two methods and establish allometric relationships among fruit surface area and fruit weight and size. The method based on image digitalization was twice as fast as the gravimetric method. Curve fitting for all pairs of independent and dependent variables was better with the image method. For most relationships, the best model was the exponential function (Y = ax b, although, due to its simplicity, the linear model is also adequated. The best allometric estimates of fruit surface area (Y were obtained using the product of fruit length by maximum width (x were: Y = 2.077 x 1.189 (R² = 94.8%; and Y = - 6.261 + 3.961 x (R² = 94.5%. Traits needed to establish this relationship are easily measured and non-destructive in nature. Validation of the allometric equations is essential when applied to other populations or landraces.A área superficial do fruto é de importância fundamental em estudos relacionados à fisiologia do desenvolvimento, bem como em pesquisas entomológicas e fitopatológicas, onde o dano causado por insetos e/ou microorganismos precisa ser quantificado. No entanto, a medição direta dessa característica é difícil, além de não muito precisa e destrutiva. Neste estudo foram estabelecidas relações alométricas visando estimar a

  1. SÃntese e caracterizaÃÃo dos Ãxidos TiO2 , SnO2 e In2O3 dopados com Fe sintetizados por moagem mecÃnica: influÃncia das ferramentas de moagem

    OpenAIRE

    GislÃnia Maria de Souza Lima Mendes

    2013-01-01

    Os semicondutores magnÃticos atraÃram a atenÃÃo de muitos cientistas nos Ãltimos anos devido, principalmente, a aplicaÃÃes tecnolÃgicas no ramo da spintrÃnica. Esses semicondutores podem ser desenvolvidos por meio de um processo chamado dopagem, onde alguns Ãtomos da matriz semicondutora sÃo substituÃdos aleatoriamente por Ãtomos magnÃticos. Esta propriedade possibilita a fabricaÃÃo de uma variedade de dispositivos eletrÃnicos a partir do mesmo material semicondutor. Neste trabalho utilizou-s...

  2. Caracterización superficial en fase gas y líquida de carbones activados

    Directory of Open Access Journals (Sweden)

    Liliana Giraldo Gutierréz

    2008-05-01

    Full Text Available Se determinó el área superficial de carbones activados obtenidos a partir de cascarilla de café y cáscara de coco, mediante isotermas de adsorción de N2 a 77K. Se compararon los resultados con aquellos obtenidos con un método comúnmente utilizado, el índice de azul de metileno, y se encontró una buena correlación entre las dos áreas determinadas por éste método. Se muestra que los dos métodos permiten realizar un análisis complementario de una superficie porosa./ The superficial area of an activated carbon obtained from coffee husk and coconut shell was determined, by means of isotherms of adsorption of N2 to 77K and the results they area compared with the method of index blue of methylene, finding an good correlation between the two areas determined by this method. This research shows that both methods allow making a complementary analysis of a porous surface.

  3. Modificaciones en la estructura superficial y la composición química de los implantes dentales de zirconio

    OpenAIRE

    Lazo, Sergio Daniel; Lazo, Gabriel Eduardo; Escudero Giachella, Ezequiel; Bentivenga, N.; Basal, Roxana Lía; Friso, Nélida Ester; Alfaro, Gabriel Enrique; Pazos, Fernando Ezequiel; Cuchetti, Diana; Amaro, Emilio Gustavo; Ivanov, Marcela; Butler, Teresa Adela

    2015-01-01

    El objetivo de este trabajo es mostrar las modificaciones estructurales de superficie y químicas en el diseño de los implantes de zirconio, para mejorar sus propiedades biodontológicas. Para el desarrollo del mismo se utilizaron 20 implantes de zirconio con el agregado de itrio, de 5 mm de diámetro y aproximadamente 9 mm de largo. Los implantes fueron elaborados por el método de CAD CAM, con doble coc ción durante el sinterizado. Posteriormente se observó la estructura superficial con la medi...

  4. Análisis de la influencia de las condiciones de proceso sobre el acabado superficial de materiales cerámicos fabricados por electroerosión

    Directory of Open Access Journals (Sweden)

    Puertas-Arbizu, I.

    2004-12-01

    Full Text Available Electrical discharge machining (EDM is an emerging alternative versus some other manufacturing processes of conductive ceramic materials, such as: laser machining, electrochemical machining, abrasive water jet, ultrasonic machining and diamond wheel grinding. Due to its interest in the industrial field, in this work a study of the influence of process conditions on the surface aspect of three conductive ceramic materials: hot-pressed boron carbide (B4C, reaction-bonded silicon carbide (SiSiC and cobalt-bonded tungsten carbide (WC-Co is carried out. These materials are to be electrical discharge machined under different machining conditions and in the particular case of finish stages (Ra ≤ 1 μm.

    El mecanizado por electroerosión (en Inglés, Electrical Discharge Machining, EDM constituye una alternativa emergente frente a otros procesos de fabricación de materiales cerámicos conductores, tales como: mecanizado por láser, mecanizado electroquímico, chorro de agua con abrasivos, mecanizado por ultrasonidos y rectificado con muela de diamante. Debido a su interés en el ámbito industrial, en este trabajo se lleva a cabo un estudio de la influencia de las condiciones de operación sobre el aspecto superficial de tres materiales cerámicos conductores: carburo de boro prensado en caliente (B4C, carburo de silicio infiltrado con silicio (SiSiC y carburo de wolframio en matriz metálica de cobalto (WC-Co, electroerosionados bajo diferentes condiciones de mecanizado y para el caso particular de regímenes de acabado (Ra ≤ 1 μm.

  5. Produção e desenvolvimento radicular de plantas de café 'Conilon' propagadas por sementes e por estacas Yield and root development of 'Conilon' coffee plants propagated by cuttings and seeds

    Directory of Open Access Journals (Sweden)

    Fábio Luiz Partelli

    2006-06-01

    Full Text Available O objetivo deste trabalho foi avaliar a produção e o desenvolvimento radicular e da parte aérea de plantas de café 'Conilon', provenientes de sementes e de estacas, no Município de Vila Valério, ES. Foi utilizado o delineamento experimental em blocos ao acaso com dois tratamentos (mudas provenientes de sementes e de estacas e 12 repetições com cinco plantas úteis por parcela. As avaliações da parte aérea foram realizadas a partir de sete meses do plantio. Foram realizadas seis desbrotas e cinco colheitas. A avaliação do sistema radicular foi realizada aos 52 meses depois do plantio em quatro profundidades (0-10, 10-20, 20-40 e 40-60 cm. Foram quantificados o diâmetro, o comprimento e a área superficial de raízes. As plantas propagadas por estaca emitiram maior número de ramos plagiotrópicos, durante os sete primeiros meses de idade, e menor número de brotos ortotrópicos durante todo o experimento. Não houve diferenças no comprimento e na área superficial de raízes finas, entre plantas propagadas por sementes e por estacas. Houve maior concentração de raízes finas nas camadas superficiais do solo. A produtividade das plantas propagadas por estacas é maior do que a das plantas propagadas por sementes.The objective of this work was to evaluate the production and root and shoot development of plants of 'Conilon' coffee, grown from seeds and branches, in Vila Valério, ES, Brazil. The experiment was performed in randomized complete block design, with two treatments (seedlings originated from seeds and branches, and 12 replicates with five plants per plot. Shoot growth evaluation was performed seven months after planting. Six pruning of the orthotropic branches and five yields were evaluated. The evaluation of the root system was done 52 months after planting in four depths (0-10, 10-20, 20-40 and 40-60 cm. Diameter, length and superficial area of roots were quantified. Plants grown from cuttings produced more plagiotropic

  6. Interação da torra e moagem do café na preferência do consumidor do oeste paranaense Influence of roasting and milling on consumers coffee preference at Paraná west-Brazil

    Directory of Open Access Journals (Sweden)

    Carla Adriana Pizarro Schmidt

    2008-08-01

    Full Text Available O objetivo deste estudo foi avaliar as preferências dos consumidores de café da região oeste do Paraná, em relação ao ponto de torra e à granulometria de moagem. Foram realizadas análises sensoriais de preferência e físico-químicas. As análises físico-químicas foram utilizadas para monitorar as mudanças ocorridas nos produtos ao longo do processo de torra. Os cafés com torras mais leves foram pouco aceitos. O café que apresentou aparência global, aroma e sabor preferido foi o que apresentava uma torra média escura, mais próxima das torras tradicionais brasileiras. A torra mais escura foi bem aceita apenas em relação à aparência. A moagem fina foi preferida em relação à aparência global do produto, mas, apesar de ter apresentado maior acidez, os provadores não diferenciaram seu sabor.This study aimed the evaluation of the consumers preference for coffee in the west region of Paraná State, Brazil, in relation to the roasting degree and grinding granulometry. Sensorial preference and physical-chemichal analysis were made. The physical-chemichal analysis were used to monitor the changes that occurred in the products along the roasting process. The samples of coffee with light toasts were little accepted. The kind of coffee that presented preferred global appearance, aroma and taste was the one which presented average dark toasting, which is the one that is more similar to the traditional Brazilians toastings. The darkest toasting, was well-accepted in relation to appearance. The thin milling was preferred in relation to the global appearance of the product, but in spite of having presented major acidity the tasters did not make difference about its taste.

  7. Deterioro de aleaciones de cobre por acción humana

    Directory of Open Access Journals (Sweden)

    Duran, A.

    2008-02-01

    Full Text Available Results are presented from several samples taken from leaves of the Pardon Portico of Mosque-Cathedral of Cordoba, where an alteration on their surface was detected. Metal samples analyzed using X-ray microanalysis and powder xray diffraction were predominantly constituted by copper with some amounts of zinc attributed to brass, whereas other samples were also constituted by copper, tin and lead attributed to bronze. Surface samples were analyzed using the same techniques. In addition Fourier transform infrared spectroscopy was also used.The main compound identified in all the surface of the leaves is copper chloride hydroxide (atacamite. Lead chlorides have also been found. These data show that the sudden alteration that appears may be attributed to the use of some cleaning product containing chloride. Other compounds detected in the surface were gypsum, quartz and oxalates coming from environmental contamination.

    Se exponen los resultados de algunas muestras alteradas procedentes de la Puerta del Perdón, pertenecientes a la Mezquita de Córdoba. Algunas de las muestras de metal analizadas mediante difracción de rayos X y microanálisis por energía dispersiva de rayos X estaban constituidas por latón (cobre con pequeñas cantidades de zinc, mientras que otras estaban constituidas por bronce (cobre, estaño y plomo. La superficie de las muestras se analizó empleando las mismas técnicas. Asimismo, se usó espectroscopia de infrarrojos. El componente principal identificado en la superficie de la puerta es cloruro básico de cobre (atacamita. Además se han encontrado cloruros de plomo. Estos datos demuestran que la repentina alteración de la superficie se puede atribuir al uso de productos de limpieza con alto contenido en cloro. Otros compuestos procedentes de la contaminación externa, como yeso, cuarzo y oxalatos también se detectaron en la superficie.

  8. HIGH ORIGIN OF SUPERFICIAL ULNAR ARTERY- A CASE REPORT

    Directory of Open Access Journals (Sweden)

    Anjana Jayakumaran Nair

    2017-03-01

    Full Text Available BACKGROUND High origin and superficially placed ulnar artery is a rare anatomical variant that usually arises either in the axilla or arm and runs a superficial course in the forearm, enters the hand and participates in the formation of superficial palmar arch. During routine dissection of cadavers in our department, we observed a unilateral case of high origin and superficial ulnar artery in a human male cadaver. It originated from the brachial artery in the lower third of arm 4 cm above its bifurcation. From its origin, it passed downwards along the medial aspect of forearm, superficial to the flexors, entered hand superficial to the flexor retinaculum and formed superficial palmar arch. The knowledge of existence of a superficial ulnar artery is important during vascular and reconstructive surgery and also in evaluation of angiographic images. Superficial position makes it more vulnerable to trauma and more accessible to cannulation.

  9. Common Superficial Bursitis.

    Science.gov (United States)

    Khodaee, Morteza

    2017-02-15

    Superficial bursitis most often occurs in the olecranon and prepatellar bursae. Less common locations are the superficial infrapatellar and subcutaneous (superficial) calcaneal bursae. Chronic microtrauma (e.g., kneeling on the prepatellar bursa) is the most common cause of superficial bursitis. Other causes include acute trauma/hemorrhage, inflammatory disorders such as gout or rheumatoid arthritis, and infection (septic bursitis). Diagnosis is usually based on clinical presentation, with a particular focus on signs of septic bursitis. Ultrasonography can help distinguish bursitis from cellulitis. Blood testing (white blood cell count, inflammatory markers) and magnetic resonance imaging can help distinguish infectious from noninfectious causes. If infection is suspected, bursal aspiration should be performed and fluid examined using Gram stain, crystal analysis, glucose measurement, blood cell count, and culture. Management depends on the type of bursitis. Acute traumatic/hemorrhagic bursitis is treated conservatively with ice, elevation, rest, and analgesics; aspiration may shorten the duration of symptoms. Chronic microtraumatic bursitis should be treated conservatively, and the underlying cause addressed. Bursal aspiration of microtraumatic bursitis is generally not recommended because of the risk of iatrogenic septic bursitis. Although intrabursal corticosteroid injections are sometimes used to treat microtraumatic bursitis, high-quality evidence demonstrating any benefit is unavailable. Chronic inflammatory bursitis (e.g., gout, rheumatoid arthritis) is treated by addressing the underlying condition, and intrabursal corticosteroid injections are often used. For septic bursitis, antibiotics effective against Staphylococcus aureus are generally the initial treatment, with surgery reserved for bursitis not responsive to antibiotics or for recurrent cases. Outpatient antibiotics may be considered in those who are not acutely ill; patients who are acutely ill

  10. Inmersiones condicionadas de grafos en superficies y seudosuperficies.

    Directory of Open Access Journals (Sweden)

    Fedriani Martel, E. M.

    1999-01-01

    Full Text Available En este trabajo se procede a recapitular resultados conocidos sobre el problema de caracterizar los grafos que admiten inmersiones en superficies y en seudosuperficies con todos los vértices en la misma cara y se da una caracterización original de los grafos con dicha propiedad en seudosuperficies que surgen de manera natural y que han sido tratadas en la literatura especializada. Se comienza desarrollando algunos conceptos necesarios para la exposición de los problemas que se tratan, pero se suponen conocidos otros básicos de la Teoría de Grafos. Los resultados relacionados llevan de forma consecuente al planteamiento de otros problemas cuyas resoluciones originales también se incluyen. En cuanto a los objetivos finales que se pretenden lograr con esta comunicación, se basan, sobre todo, en aprovechar los resultados obtenidos por la Teoría de Grafos para resolver problemas pertenecientes a otras áreas, como la Economía. Se termina exponiendo un motivo topológico por el que estos estudios sobre las inmersiones y las inmersiones peri-S se hallan próximas a la Economía.

  11. Drenaje suplementario del sistema venoso superficial en colgajos pediculados Supplementary drainage of superficial venous system in pedicled flaps

    Directory of Open Access Journals (Sweden)

    A. Fernández García

    2012-06-01

    Full Text Available Los colgajos pediculados pueden sufrir edema y congestión debido a que su drenaje a trevés del sistema venoso superfical es imposible y el flujo hacia el sistema profundo a nivel del pedículo es precario. Esta situación suele evolucionar hacia la necrosis parcial o la pérdida total del colgajo en pocas horas. La apertura del sistema venoso superficial permite el drenaje adecuado de los tejidos transferidos y evita estas complicaciones. Este artículo analiza el papel de las anastomosis microquirúrgicas en el sistema venoso superficial de los colgajos pediculados. Esta técnica permite comunicar el sistema venoso superfical de los tejidos transferidos con el sistema venoso superficial del territorio que rodea al defecto. Presentamos los resultados obtenidos con esta técnica en colgajos de perforante en hélice, colgajos miocutáneos, colgajos neurocutáneos y colgajos fasciograsos volteados.The pedicled flaps can suffer edema and congestion due to the impossibility of drainage toward the superficial venous system and the precarious flow via the deep system at the level of the pedicle. The evolution of this situation is usually partial necrosis or total loss of the flap in a few hours. The opening of the venous superficial system achieves an appropriate drainage of the transfered tissues and avoids these complications. In this article we analyze the role of the microsurgical anastomosis at the level of the superficial venous system of pedicled flaps. This technique allows to communicate the superficial venous system of the transfered tissues with the superficial venous system of the territory around the defect. We report the results with this method in propeller perforator flaps, miocutaneous flaps, neurocutaneous flaps and adipofascial turn over flaps.

  12. Modified Functional Superficial Parotidectomy With Ligation of the Major Branch of the Parotid Duct Extending to the Superficial Lobe.

    Science.gov (United States)

    Chang, Jung Woo; Leem, Soo Seong; Choi, Hwan Jun; Lee, Jang Hyun

    2017-05-01

    A functional superficial parotidectomy can maintain salivary function by preserving the Stensen duct. However, this technique still brings the possibility of salivary leakage, because major branches of the parotid duct from the resected site do not get ligated. To reduce this complication, this study introduces a modified technique with major branch ligation. From December 2008 to February 2015, 14 patients who underwent superficial parotidectomy were divided into 2 groups. Group A was treated with the modified functional superficial parotidectomy involving the major branch between the superficial lobe and parotid duct. Group B was treated with the conventional superficial parotidectomy without involving the major branch of the parotid duct. The clinical complications, period of Hemovac usage, and surgical duration were noted in each group. Two of 8 patients in group A had a major branch from Stensen duct that was ligated, and there was no evidence of salivary leakage or sialocele in any of the patients of group A, whereas group B contained 2 cases of salivary leakage, one of which became sialocele. Group A had a significantly longer Hemovac maintenance period than group B (P < 0.05), and the duration of surgery was also significantly different between the 2 groups (P < 0.05). Because a solitary major branch of the main parotid duct occasionally extends toward the superficial lobe, our modified technique-functional superficial parotidectomy with ligation of the major branch toward the superficial lobe-is a useful option for treatment of a benign parotid mass in such cases.

  13. Acúmulo de nutrientes por forrageiras cultivadas em sistema de escoamento superficial para tratamento de esgoto doméstico

    Directory of Open Access Journals (Sweden)

    Aline Azevedo Nazário

    2014-01-01

    Full Text Available Atualmente, observa-se deterioração da qualidade das águas, a qual está vinculada ao crescimento populacional e as diversas atividades de produção agroindustriais, neste contexto o trabalho teve como objetivo avaliar o desempenho de três espécies forrageiras utilizadas no tratamento de esgoto doméstico (ED por meio da disposição no solo aplicando a técnica do escoamento superficial. O experimento foi conduzido no Centro de Ciências Agrárias da Universidade Federal do Espírito Santo usando delineamento experimental inteiramente casualizado com três repetições no esquema de parcela sub-subdividida 3x5x2. As parcelas, em três níveis, foram compostas pelas espécies Brachiaria brizantha cv. Marandu, Cynodon sp. cv Tifton 85 e Paspalum atratum cv. Pojuca, nas subparcelas, em 5 níveis as taxas de aplicação de efluentes com 7,91; 15,81; 23,72; 31,63 e 39,54 kg ha-1 dia1 de DBO e foram realizados dois cortes no material vegetal em ciclos de 28 dias após o início da aplicação dos tratamentos. Os resultados mostraram que o acúmulo de nutrientes pelas forrageiras foi superior aos relatados em literatura para o capim Marandu, Tifton 85 e Pojuca. Esses resultados reforçam o potencial desses capins para o tratamento de águas residuárias, especialmente efluente de ED.

  14. Diseño nanotecnológico de superficies con propiedades antibacterianas: el grafeno

    Directory of Open Access Journals (Sweden)

    P de la Peña Benítez

    Full Text Available La nanotecnología se está convirtiendo en los últimos años en una inmejorable herramienta en la elección de materiales para el diseño arquitectónico de espacios sensibles a las bacterias, como hospitales, clínicas, etc. El presente artículo hace un recorrido sobre las principales superficies antibacterianas. Siendo el grafeno un material que ofrece unas posibilidades inigualables gracias a sus propiedades, permitiéndonos mejorar los acabados superficiales por su alta actividad bactericida.

  15. The correlation study of radiological findings with pathological classification of superficial depressed (IIc type) early gastric cancer

    International Nuclear Information System (INIS)

    Liu Linxiang; Deng Bingxing; Liu Yujin; Iinuma, G.; Moriyama, N.

    2007-01-01

    Objective: To investigate the relations between radiological findings and pathological classification of superficial depressed (II c type) early gastric cancer. Methods: Radiological features in subtonic double contrast barium examination and the endoscopic pictures of early gastric cancer compared with the global pathological specimens and micro-pathological features were prospectively studied. Combined with the gastric endoscopic pictures, the sharpness of margin of the lesions, the changes of converging mucosal folds and the changes of the depressed surface on the film of double contrast barium examination were analyzed. The correlation between the radiological features and histological classification of gastric cancer including well differentiated tubular adenocarcinoma (tub1), moderately differentiated tubular adenocarcinoma (tub2), poorly differentiated adenocarcinoma (por) and signet-ring cell carcinoma (sig) were studied. Results: In 102 cases of II c type early gastric cancer, there were tub1 27 cases, tub2 11, por 26 and sig 38 cases histologically. The margin of the depressed lesions of tubl (24 cases) and tub2 (9 cases) cancers were mostly unsharply demarcated or with fine spicular border, while the margin of lesions of por(15 cases) and sig(31 cases) were mostly clearly and sharply demarcated, with statistical significance (P<0.01). The depressed surface of tub1 and tub2 lesions (17 cases) revealed little unevenness, sometimes with evenly granulations, single nodule and scar-like depression, while that of por and sig lesions (41 cases) manifested as nodules of varying sizes, with statistical significance (P<0.01). Conclusion: The radiological findings of superficial depressed early gastric cancer in different histological types were different, the possible histological type could be speculated according to the radiological findings of the lesions. (authors)

  16. Clima y temperatura sub-superficial del mar en Bahía Culebra, Golfo de Papagayo, Costa Rica

    Directory of Open Access Journals (Sweden)

    Eric J. Alfaro

    2012-04-01

    Full Text Available Bahía Culebra, Golfo de Papagayo, Costa Rica es una región de afloramiento estacional. Para determinar la relación entre el clima y la variabilidad de la temperatura sub-superficial, se analizaron los registros de la temperatura sub-superficial del mar de nueve estaciones localizadas en la Bahía. El análisis permitió caracterizar su ciclo anual y explorar su relación con fuentes de variabilidad climática que influencian el clima regional para el periodo 1998-2010. Los resultados se contextualizaron usando además los datos de una estación meteorológica automática que funcionó en la bahía junto con el registro de la temperatura superficial del mar para una rejilla que cubre la región de 9-11°N, 85-87°W, para el periodo 1854-2011. Debido a la tendencia positiva encontrada en la región para la temperatura superficial del mar, se concluye que los resultados mostrados asociados a los ciclos anuales y diarios en Bahía Culebra deben ser interpretados bajo un escenario de cambio climático, asociado a un calentamiento ocurrido desde 1854, además coherente con lo observado globalmente, y que su variabilidad climática está influenciada no sólo por aquella ligada a la de El Niño-Oscilación del Sur, en el Pacífico Ecuatorial, sino también por influencias de tipo atmosférico relacionadas con la variabilidad en el Océano Atlántico, debido a que los eventos cálidos (fríos en Bahía Culebra tienden a ocurrir en concordancia con anomalías positivas y negativas (negativas y positivas de los índices Niño 3.4 y OAN, respectivamente.

  17. Anatomía de la arteria temporal superficial: importancia quirúrgica: estudio piloto en cadáveres

    Directory of Open Access Journals (Sweden)

    J.J. Pradel-Mora

    2015-03-01

    Full Text Available El conocimiento preciso de los patrones vasculares permite mejorar los resultados de la reconstrucción regional del pabellón auricular y el diseño de colgajos regionales dependientes de la arteria temporal superficial para la reconstrucción facial. En México, no contamos en la actualidad con descripciones anatómicas de las variantes vasculares normales de la arteria temporal superficial. El objetivo de este trabajo es la descripción de las variantes anatómicas de la arteria temporal superficial a través de la disección de este vaso en 12 regiones tempo-parieto-occipitales en cadáveres. Nuestros resultados muestran que la arteria temporal superficial siempre se divide en dos ramas, una anterior y otra posterior, la distribución de ésta se sitúa en el cuarto más posterior de la región temporal, con una bifurcación alta. La distribución de la anatomía vascular, tomando en cuenta el calibre mayor de la arteria temporal superficial con respecto a la arteria auricular posterior, la ausencia de esta última en 4 de las regiones estudiadas, así como la distancia de dichos vasos con respecto al conducto auditivo externo, sugieren que en nuestra población la irrigación del pabellón auricular depende de la arteria temporal superficial, restándole importancia a la aportación del riego sanguíneo de esta región por parte de la arteria auricular posterior. Nuestro estudio arroja resultados que indican la existencia de variaciones importantes en la anatomía vascular regional que justifican la realización de estudios posteriores que permitan una descripción mas detallada de la misma para aumentar el éxito de las intervenciones quirúrgicas.

  18. The superficial ulnar artery: development and clinical significance Artéria ulnar superficial: desenvolvimento e relevância clínica

    Directory of Open Access Journals (Sweden)

    Srinivasulu Reddy

    2007-09-01

    Full Text Available The principal arteries of the upper limb show a wide range of variation that is of considerable interest to orthopedic surgeons, plastic surgeons, radiologists and anatomists. We present here a case of superficial ulnar artery found during the routine dissection of right upper limb of a 50-year-old male cadaver. The superficial ulnar artery originated from the brachial artery, crossed the median nerve anteriorly and ran lateral to this nerve and the brachial artery. The superficial ulnar artery in the arm gave rise to a narrow muscular branch to the biceps brachii. At the elbow level the artery ran superficial to the bicipital aponeurosis where it was crossed by the median cubital vein. It then ran downward and medially superficial to the forearm flexor muscles, and then downward to enter the hand. At the palm, it formed the superficial and deep palmar arches together with the branches of the radial artery. The presence of a superficial ulnar artery is clinically important when raising forearm flaps in reconstructive surgery. The embryology and clinical significance of the variation are discussed.As principais artérias do membro superior apresentam uma ampla variação, que é relativamente importante a cirurgiões ortopédicos e plásticos, radiologistas e anatomistas.Apresentamosumcaso de artéria ulnar superficial encontrada durante dissecção de rotina de membro superior direito de um cadáver masculino de 50 anos de idade.Aartéria ulnar superficial originava-se da artéria braquial, cruzava o nervo mediano anteriormente e percorria lateralmente esse nervo e a artéria braquial. A artéria ulnar superficial no braço deu origem a um ramo muscular estreito do músculo bíceps braquial. Ao nível do cotovelo, a artéria percorria superficialmente a aponeurose bicipital, onde era cruzada pela veia cubital mediana. Percorria, então, em sentido descendente e medialmente superficial aos músculos flexores do antebraço, e então descendia para

  19. Internet: Más Allá de la superficie

    Directory of Open Access Journals (Sweden)

    Diego Andrés Tovar Cardozo

    2015-01-01

    Full Text Available El presente artículo expone un enfoque técnico de la Internet que da a conocer algunas características de su estructura, la cual muestra dos sectores distintos en donde se puede encontrar la información, es decir, esta se encuentra distribuida en niveles o capas de manera parcial o restringida, integrada o desagregada, todo ello dependiendo de lo que el usuario requiera realmente. La forma correcta para acceder a la información requerida está en saber a dónde ir a buscarla, la web profunda es información no visible para el usuario común que no tiene la habilidad de búsqueda, por lo cual se hace necesario verificar el tipo, la calidad y veracidad de la información a obtener antes de proceder a usar la información encontrada con los buscadores tradicionales. Acceder a Internet sin saber que existe una falsa cortina utilizada por la mayoría de los buscadores convencionales, es limitar las capacidades de navegar en un océano de información valiosa, en ello radica la importancia de conocer la web desde lo superficial (Surface Web a lo profundo (Deep Web.

  20. Superficie Específica y Estado Vital de la Materia

    Directory of Open Access Journals (Sweden)

    J. Hernando Ordoñez

    1992-03-01

    Full Text Available

    Se propone reemplazar el término de materia viva por el de estado vital de la materia por considerarlo adecuado, pues la materia es la misma, lo que cambia es su estado. Se estudia la relación entre la superficie específica y el estado vital de la materia. Constante del estado vital y el valor crítico de la superficie específica. Qué es la fuerza de inducción vital? Diferenciación funcional de las células. Cómo regula la unidad biológica su superficie específica? La materia que piensa es el fenómeno más grandioso de la creación.

    Sin entrar en disquisiciones sobre la naturaleza, manifestaciones y formas de la energía, me permito hacer unas a manera de divagaciones sobre los diferentes estados de la materia, que es una forma de la energía.

    Estados de la materia

    Sabemos que la mínima porción de la materia es el átomo, que tiene una composición compleja, que no es del caso estudiar. Los átomos pueden existir aislados y estar en lo que llamamos estado iónico. Si los átomos se juntan, forman moléculas, y su existencia constituye el estado molecular. Si las moléculas se juntan, forman complejos más grandes y tendremos las micelas, que constituyen el estado coloidal.

    Hasta aquí nuestros conocimientos nos son familiares, triviales. Pero hay un estado más complejo, en el cual entra materia en estado iónico, molecular y coloidal entrelazados entre sí, con propiedades totalmente diferentes. La materia en este estado adquiere caracteres extraordinarios tales como el de crecer, reproducirse, independizarse de las leyes físicas, puede autorregular su composición química, autorregular sus manifestaciones físicas, reaccionar ante los estímulos más variados, puede llegar hasta alturas inconcebibles integrando ideas. A este estado fue al que llamé en publicación anterior (1 estado vital, concepto que fue corroborado más ‘tarde por J.R. Brown (2 cuando me coment

  1. Automated analysis of damages for radiation in plastics surfaces; Analisis automatizado de danos por radiacion en superficies plasticas

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, C; Camacho M, E; Tavera, L; Balcazar, M [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    1990-02-15

    Analysis of damages done by the radiation in a polymer characterized by optic properties of polished surfaces, of uniformity and chemical resistance that the acrylic; resistant until the 150 centigrade grades of temperature, and with an approximate weight of half of the glass. An objective of this work is the development of a method that analyze in automated form the superficial damages induced by radiation in plastic materials means an images analyst. (Author)

  2. Difference fractal surfaces poured earth floors Tamaulipas / Diferencia fractal en superficies de tierra vertida con suelo de Tamaulipas

    Directory of Open Access Journals (Sweden)

    Edgardo Jonathan Suárez Dominguez

    2013-09-01

    Full Text Available Poured earth is a sustainable construction and economically feasible technique to develop in Tamaulipas, by the materials availability and traditional manufacturing procedures uses. There are several variables to be considered in these elements for their properties, among them it can be found roughness and porosity analysis which are important because they are related to material mechanical resistance and durability. This study aimed to characterize solid surfaces using fractal dimension to know its uniformity and porosity, compared with a concrete surface. Solids were obtained from poured earth of two combinations of soils stabilized with cement from the state of Tamaulipas. We found that a surface of a sample, obtained with ground, is more uniform than poured concrete surface, and that fractal dimension is higher while porosity increases; results suggest that this is because of the presence of clay in the poured earth mixtures. La tierra vertida es una técnica constructiva sustentable y económicamente viable para desarrollarse en Tamaulipas, por la disponibilidad de materiales y procedimientos de fabricación similares a los tradicionales. Son diversas las variables que deben estudiarse en estos elementos para conocer sus propiedades, entre las que se encuentran la rugosidad y la porosidad, las cuales son importantes debido a su estrecha relación con la resistencia mecánica y durabilidad del material estudiado. El presente trabajo tuvo por objetivo caracterizar superficies sólidas a partir de la dimensión fractal para conocer su uniformidad y porosidad, comparándola con una superficie de concreto. Los sólidos fueron obtenidos a partir de tierra vertida conformada de dos combinaciones de suelos estabilizadas con cemento provenientes del estado de Tamaulipas. Se encontró que una superficie de tierra vertida es menos irregular que una superficie de concreto además de tener una menor porosidad reflejada en una menor dimensión fractal

  3. Queratitis causada por Paecilomyces lilacinus. Reporte de un caso

    Directory of Open Access Journals (Sweden)

    Alejandro del Castillo Ruiz

    2016-01-01

    Conclusiones: La queratitis micótica es una infección corneal muy seria, de evolución tórpida, que puede causar ceguera. Comúnmente se desarrolla en pacientes después de un trauma o en aquellos con una superficie corneal comprometida. Voriconazol se ha referido como un fármaco útil para el tratamiento de úlceras corneales causadas por Paecilomyces lilacinus con muy buena penetración a estroma, acuoso y vítreo por vía oral y tópica. Un diagnóstico y tratamiento oportunos fueron esenciales en este caso de queratitis micótica para su resolución.

  4. Problemas en la reparación por laser cladding de superficies de acero AISI D2 tratado térmicamente

    Directory of Open Access Journals (Sweden)

    Busquets, D.

    2010-08-01

    microscopia óptica, microscopía electrónica de barrido (MEB y difracción de electrones retrodispersados (EBSD. El objetivo del trabajo es relacionar los parámetros del proceso de recubrimiento por láser (potencia, velocidad, caudal de polvo con las transformaciones metalúrgicas producidas en el acero de herramienta AISI D2, con el fin de optimizar las condiciones de operación durante la reparación. Los resultados muestran que los parámetros influyen en gran medida en la geometría del cordón y en la formación de la microestructura. Aunque es sencillo obtener deposiciones geométricamente aceptables (forma y tamaño adecuado, ausencia de porosidad, en muchos casos aparecen fenómenos perjudiciales como la dilución de carburos y la aparición de fases metaestables que modifican las propiedades mecánicas del recubrimiento. En concreto, la presencia de austenita retenida en el recubrimiento, relacionada con la temperatura máxima alcanzada y la velocidad de enfriamiento, produce una fuerte disminución en la dureza, que debe evitarse. Además, para una misma composición y acabado superficial, el estado metalúrgico inicial del sustrato tiene una gran influencia sobre el resultado. Sustratos en estado de temple implican una mayor absorción del láser y la acumulación de calor que produce mayores zonas afectadas por el calor (ZAC. Por ese motivo, deben optimizarse los parámetros del proceso para cada operación de manera que se mejore el comportamiento en servicio del componente.

  5. Imaging of the most frequent superficial soft-tissue sarcomas

    International Nuclear Information System (INIS)

    Morel, Melanie; Taieb, Sophie; Ceugnart, Luc; Penel, Nicolas; Mortier, Laurent; Vanseymortier, Luc; Robin, Y.M.; Gosset, Pierre; Cotten, Anne

    2011-01-01

    Superficial soft-tissue sarcomas are malignant mesenchymal tumors located within the cutaneous and/or subcutaneous layers. Most superficial soft-tissue sarcomas are low-grade tumors; yet, the risk of local recurrence is high, and initial wide surgery is the main prognostic factor. Some of these superficial sarcomas may grow, following an infiltrative pattern, and their real extent may be underestimated clinically. Imaging techniques are useful to determine precisely the real margins of the tumor, especially in cases of clinically doubtful or recurrent or large superficial lesions. Imaging tools enable one to determine the relationship with the superficial fascia separating the subcutaneous layer from the underlying muscle. In our institution ultrasonographic examination is followed by magnetic resonance (MR) imaging when the size of the lesion exceeds 3-5 cm. Imaging assessment is performed prior to biopsy, enabling optimal surgical management. Imaging features of the main superficial sarcomas are detailed in the following article, according to their major locations: those arising in the epidermis and/or dermis, which are most often diagnosed by dermatologists, and the subcutaneous sarcomas. (orig.)

  6. Imaging of the most frequent superficial soft-tissue sarcomas

    Energy Technology Data Exchange (ETDEWEB)

    Morel, Melanie; Taieb, Sophie; Ceugnart, Luc [Centre Oscar Lambret, Department of Radiology, Lille (France); Penel, Nicolas [Centre Oscar Lambret, Department of Oncology, Lille (France); Mortier, Laurent [Centre Hospitalier Universitaire de Lille, Department of Dermatology, Hopital Claude Huriez, Lille (France); Vanseymortier, Luc [Centre Oscar Lambret, Department of Surgery, Lille (France); Robin, Y.M. [Centre Oscar Lambret, Departement of Pathology, Lille (France); Gosset, Pierre [Groupement Hospitalier de l' Institut Catholique-Faculte Libre de Medecine de Lille, Department of Pathology, Hopital Saint-Philibert, Lomme (France); Cotten, Anne [Centre Hospitalier Universitaire de Lille, Department of Musculoskeletal Radiology, Centre Hopital Roger Salengro, Lille (France)

    2011-03-15

    Superficial soft-tissue sarcomas are malignant mesenchymal tumors located within the cutaneous and/or subcutaneous layers. Most superficial soft-tissue sarcomas are low-grade tumors; yet, the risk of local recurrence is high, and initial wide surgery is the main prognostic factor. Some of these superficial sarcomas may grow, following an infiltrative pattern, and their real extent may be underestimated clinically. Imaging techniques are useful to determine precisely the real margins of the tumor, especially in cases of clinically doubtful or recurrent or large superficial lesions. Imaging tools enable one to determine the relationship with the superficial fascia separating the subcutaneous layer from the underlying muscle. In our institution ultrasonographic examination is followed by magnetic resonance (MR) imaging when the size of the lesion exceeds 3-5 cm. Imaging assessment is performed prior to biopsy, enabling optimal surgical management. Imaging features of the main superficial sarcomas are detailed in the following article, according to their major locations: those arising in the epidermis and/or dermis, which are most often diagnosed by dermatologists, and the subcutaneous sarcomas. (orig.)

  7. Resultados de diferentes alternativas de manejo del riego superficial tecnificado en el cultivo de la papaya maradol roja plantada con marco extradenso

    OpenAIRE

    Ricardo, Pérez Hernández; Jiménez Espinosa, Esequiel; Montero San José, Lorenzo; Sarmiento García, Orlando; Guzmán Vizcaino, Joaquín

    2010-01-01

    El objetivo de este trabajo consistió en la realización de un estudio de diferentes manejos del riego por gravedad tecnificado, mediante evaluaciones de campo en el cultivo de referencia. El caudal de mejor comportamiento para el riego con flujo continuo con la variante de surcos abiertos de 130 m de longitud fue el de 1,56 L·s-1 , con eficiencia de aplicación 61,8%, eficiencia de almacenamiento 97% y distribución 82,6%. Las perdidas por escurrimiento superficial y percolación profunda fueron...

  8. Resultados de diferentes alternativas de manejo del riego superficial tecnificado en el cultivo de la papaya maradol roja plantada con marco extradenso

    OpenAIRE

    Ricardo Pérez Hernández; Esequiel Jiménez Espinosa; Lorenzo Montero San José; Orlando Sarmiento García; Joaquín Guzmán Vizcaino

    2010-01-01

    El objetivo de este trabajo consistió en la realización de un estudio de diferentes manejos del riego por gravedad tecnificado, mediante evaluaciones de campo en el cultivo de referencia. El caudal de mejor comportamiento para el riego con flujo continuo con la variante de surcos abiertos de 130 m de longitud fue el de 1,56 L¿s-1, con eficiencia de aplicación 61,8%, eficiencia de almacenamiento 97% y distribución 82,6%. Las perdidas por escurrimiento superficial y percolación profunda fueron ...

  9. ESTUDIO DE LA ADSORCIÓN DE PROTEÍNAS SOBRE SUPERFICIES DE ACIDO POLILÁCTICO MEDIANTE TÉCNICAS GRAVIMÉTRICAS Y ELECTROQUÍMICAS

    Directory of Open Access Journals (Sweden)

    HUGO ARMANDO ESTUPIÑAN DURAN

    2011-01-01

    Full Text Available Metodos electroquimicos fueron utilizados para promover y evaluar la adsorcion orientada de albumina y colageno sobre superficies polimericas de acido polilactico (PLA mediante la aplicacion de un sobrepotencial anodico en un rango de 0 V a 0,45 V. La adsorcion fueestudiada usando mediciones simultaneas de espectroscopia de impedancia electroquimica (EIE y microbalanza de cristal de cuarzo (QCM, en un rango de temperaturas de 25°C a 45°C, con variaciones en proteina entre 5 y 20 ¿Êg/ml en solucion buffer de fosfato de pH 7,4. Con el aumento de la concentracion de proteinas en el electrolito, disminuye la resistencia a la transferencia de carga, exhibiendo asi una mayor adsorcion sobre la superficie, ademas de aumentar la magnitud de los cambios de masa. Se mejoro la hidrofilicidad del recubrimiento, mostrando una mayor afinidad con las soluciones de colageno y por lo tanto un aumento en la biocompatibilidad debido a la activacion superficial.

  10. Estudio de los trastornos postabdominoplastia de la sensibilidad cutánea superficial

    Directory of Open Access Journals (Sweden)

    S. Mercedes-Acosta

    2013-09-01

    Full Text Available La abdominoplastia es una de las intervenciones quirúrgicas de mayor solicitud por parte de los pacientes dentro de la Cirugía Plástica. Uno de los inconvenientes que pueden presentarse después de su realización es la disminución o pérdida de sensibilidad cutánea de la pared abdominal como consecuencia de la disección de los nervios tóraco-abdominales al elevar el colgajo cutáneo, que se presenta hasta en un 57-72 % de los pacientes. Nuestro objetivo es determinar los trastornos de la sensibilidad cutánea superficial que se producen en el abdomen tras una abdominoplastia y el tiempo necesario para recuperar esa sensibilidad. Realizamos un estudio observacional, prospectivo, de cohorte, en el cual se incluyen 50 pacientes de sexo femenino, en dos grupos: un grupo control, al cual no se le realizó abdominoplastia, constituido por 20 mujeres con edades entre 24-40 años (promedio de 29.6 años y sin cirugías abdominales previas, comorbilidades cutáneas ni sistémicas, y un grupo de estudio compuesto por 30 pacientes de edades comprendidas entre los 22-57 años (promedio de 36.2 años, con características similares a las del grupo control, a las cuales se les realizó abdominoplastia. La evaluación de la pared abdominal se realizó para los diferentes parámetros de la sensibilidad cutánea superficial usando un sistema de división del abdomen en 12 áreas; se examinó el tacto, el dolor, la temperatura (calor y frío y la discriminación de dos puntos antes de la cirugía, a los 3 y a los 6 meses después de la abdominoplastia. Todas nuestras pacientes sometidas a abdominoplastia presentaron alguna alteración de la sensibilidad en comparación con las pacientes del grupo control. Las modalidades de la sensibilidad evaluadas a los 3 y 6 meses en el área 8 presentaron ausencia de respuesta al estímulo excepto para el tacto superficial, que estuvo presente en un 33.3 % a los 6 meses; el área 5 presentó mejoría ante los est

  11. Volumen de la aurícula izquierda indexada por superficie corporal en sujetos normales divididos por sexo y edad

    Directory of Open Access Journals (Sweden)

    Héctor A. Deschle

    2010-01-01

    Full Text Available RESUMENIntroducciónEl tamaño de la aurícula izquierda (AI se ha relacionado con la ocurrencia de eventoscardiovasculares en pacientes mayores sin cardiopatía previa.Los valores considerados normales en adultos se suelen tomar de publicaciones extranjerasque presentan valores disímiles y no incluyen la división por edades, por lo que no quedaclaro el impacto que el envejecimiento podría tener sobre el tamaño auricular izquierdo, locual los hace difícilmente aplicables a la población general.ObjetivosEvaluar las modificaciones en el volumen indexado de la aurícula izquierda en sujetos saludablesde nuestro medio divididos por sexo y edad.Material y métodosEntre 2007 y 2008 ingresaron 725 pacientes asintomáticos sin antecedentes de cardiopatía,diabetes, ni enfermedades de relevancia clínica. Sexo masculino: 325. Se dividieron en gruposetarios: a 65 años. El volumen de laaurícula izquierda (AI se calculó de acuerdo con la fórmula: 8/3 π [(A1(A2/(L] (A1 = áreaen 4 cámaras, A2 = área en 2 cámaras, L = longitud más pequeña entre ambas vistas. Lasuperficie corporal se calculó con la fórmula de Mosteller.ResultadosEl volumen indexado de la AI fue significativamente mayor en varones > 64 años (32,89 ±5,93 cm³/m² con respecto a los tres primeros grupos etarios (p < 0,01. No hubo diferenciassignificativas entre los grupos del sexo femenino.ConclusiónEl volumen de la AI es significativamente mayor en varones de más de 64 años.REV ARGENT CARDIOL 2010;78:39-42.

  12. OXIDACIÓN DE LA SUPERFICIE DE CARBÓN ACTIVADO MEDIANTEHNO3 Y H2O2: EFECTO SOBRE LA REMOCIÓN DE NÍQUEL (IIEN SOLUCIÓN ACUOSA

    Directory of Open Access Journals (Sweden)

    Paola Rodriguez estupiñan

    2011-11-01

    Full Text Available Este trabajo analiza el efecto de la modificaciónde la química superficial deun carbón activado granular, CAG, poroxidación con ácido nítrico, CAG-N,y peróxido de hidrogeno, CAG-P en laadsorción de iones níquel desde soluciónacuosa.Las muestras obtenidas se caracterizarona través de diferentes técnicas; laquímica superficial se evaluó por determinacionesde acidez y basicidad total,punto de carga cero y espectroscopia IR,que muestran el efecto del agente oxidante.Los parámetros texturales, como áreasuperficial BET y volúmenes de poro, seevaluaron mediante adsorción de gases.Los valores de área superficial BET delos sólidos se encuentran entre 816 y 876m2g-1, adicionalmente se determinaronentalpías de inmersión de los carbonesactivados en agua y benceno.Finalmente, los resultados experimentalesde la adsorción desde soluciónse ajustaron a los modelos de Langmuir,Freundlich, Redlich-Peterson y Toth,y se encontró el mejor ajuste para esteúltimo. Los valores de la capacidad deadsorción determinadas por el modelo deLangmuir están entre 29,68 y 50,97 mgg-1, lo que indica que la capacidad de adsorcióndepende, en gran medida, de laquímica superficial del sólido.

  13. Superficial dose evaluation of four dose calculation algorithms

    Science.gov (United States)

    Cao, Ying; Yang, Xiaoyu; Yang, Zhen; Qiu, Xiaoping; Lv, Zhiping; Lei, Mingjun; Liu, Gui; Zhang, Zijian; Hu, Yongmei

    2017-08-01

    Accurate superficial dose calculation is of major importance because of the skin toxicity in radiotherapy, especially within the initial 2 mm depth being considered more clinically relevant. The aim of this study is to evaluate superficial dose calculation accuracy of four commonly used algorithms in commercially available treatment planning systems (TPS) by Monte Carlo (MC) simulation and film measurements. The superficial dose in a simple geometrical phantom with size of 30 cm×30 cm×30 cm was calculated by PBC (Pencil Beam Convolution), AAA (Analytical Anisotropic Algorithm), AXB (Acuros XB) in Eclipse system and CCC (Collapsed Cone Convolution) in Raystation system under the conditions of source to surface distance (SSD) of 100 cm and field size (FS) of 10×10 cm2. EGSnrc (BEAMnrc/DOSXYZnrc) program was performed to simulate the central axis dose distribution of Varian Trilogy accelerator, combined with measurements of superficial dose distribution by an extrapolation method of multilayer radiochromic films, to estimate the dose calculation accuracy of four algorithms in the superficial region which was recommended in detail by the ICRU (International Commission on Radiation Units and Measurement) and the ICRP (International Commission on Radiological Protection). In superficial region, good agreement was achieved between MC simulation and film extrapolation method, with the mean differences less than 1%, 2% and 5% for 0°, 30° and 60°, respectively. The relative skin dose errors were 0.84%, 1.88% and 3.90%; the mean dose discrepancies (0°, 30° and 60°) between each of four algorithms and MC simulation were (2.41±1.55%, 3.11±2.40%, and 1.53±1.05%), (3.09±3.00%, 3.10±3.01%, and 3.77±3.59%), (3.16±1.50%, 8.70±2.84%, and 18.20±4.10%) and (14.45±4.66%, 10.74±4.54%, and 3.34±3.26%) for AXB, CCC, AAA and PBC respectively. Monte Carlo simulation verified the feasibility of the superficial dose measurements by multilayer Gafchromic films. And the rank

  14. Viabilidade do emprego de cinza de casca de arroz natural em concreto estrutural. Parte I: propriedades mecânicas e microestrutura

    Directory of Open Access Journals (Sweden)

    Geraldo Cechella Isaia

    Full Text Available A casca de arroz, para ser utilizada em concreto estrutural, necessita de queima com temperatura controlada e de moagem prévia para lhe conferir maior reatividade pozolânica. Este trabalho discute o emprego da cinza de casca de arroz (CCA natural e residual, queimada sem controle de temperatura e sem moagem, de forma a simplificar o processamento da CCA e ampliar seu uso em concretos convencionais, em locais próximos onde é produzido, Estudou-se a sequência de colocação e o tempo de mistura dos materiais na betoneira, para obtenção do melhor desempenho da automoagem no tambor. Foram testadas misturas de concreto de referência com cimento Portland e com 15% e 25% de substituição de cimento, em massa, por CCA natural e moída. Foram realizados ensaios de resistência à compressão axial, tração por compressão diametral, módulo de elasticidade, retração total, porosimetria por intrusão de mercúrio, água quimicamente combinada e MEV. A análise dos resultados revela a viabilidade da substituição de 15% de cimento por CCA natural, com perda não significativa de resistência à tração e módulo de elasticidade a 28 dias, com recuperação total a 91 dias, para concretos com resistências à compressão entre 25 MPa e 40 MPa.

  15. Modelización de la tensión superficial de surfactantes no iónicos

    OpenAIRE

    Arias Barros, Serxio Ith

    2016-01-01

    En el presente trabajo se realiza un tratamiento cuantitativo de la tensión superficial dinámica a través de diferentes aproximaciones matemáticas, considerando un mecanismo controlado por difusión. El modelo clásico se ha modificado para que describa las condiciones experimentales de forma más precisa al considerar un dominio de difusión finito. Se han fijado los límites del dominio de forma que la concentración en esta región permanezca constante tras la adsorción en la interfase aire-agua,...

  16. Determinantes socioeconómicos de la calidad del agua superficial en México

    Directory of Open Access Journals (Sweden)

    María Eugenia Ibarrarán Viniegra

    2017-04-01

    Full Text Available La calidad y la disponibilidad de agua de los ríos en México son cruciales para el desarrollo regional y nacional, pero tienen problemas graves; en 2006, 74 por ciento de las aguas superficiales tenía grados diferentes de contaminación. El objetivo de esta investigación es identificar la influencia de algunas variables socioeconómicas en la calidad del agua superficial en las regiones hidrológicas administrativas, y proponer acciones para mejorarla. Según el análisis econométrico, la actividad económica y la densidad poblacional perjudican la calidad del agua superficial en dichas regiones. Es poco el efecto del aumento de las plantas de tratamiento de agua en cuanto a la contaminación; el incremento en el caudal tratado es contraproducente para la calidad del agua. Estos elementos presentan aspectos importantes para ser abordados por las políticas públicas. -------------------- The quality and availability of water in Mexican rivers is critical for regional and national development, but they pose serious problems. In 2006, 74 percent of the surface water in Mexico had different levels of pollution. The objective of this research is to identify the influence of socioeconomic variables in surface water quality on each of the hydrological-administrative regions (HARS and to propose actions in order to improve its quality. After an econometric analysis, results show that surface water quality in the different hars is affected by economic activity and population density. On the other hand, the increase of water treatment plants has little impact on reducing water pollution and the increase of treated water shows a counterproductive effect on water quality. All of these aspects should be considered when designing public policy.

  17. Scanning electron microscopy of superficial white onychomycosis*

    Science.gov (United States)

    de Almeida Jr., Hiram Larangeira; Boabaid, Roberta Oliveira; Timm, Vitor; Silva, Ricardo Marques e; de Castro, Luis Antonio Suita

    2015-01-01

    Superficial white onychomycosis is characterized by opaque, friable, whitish superficial spots on the nail plate. We examined an affected halux nail of a 20-year-old male patient with scanning electron microscopy. The mycological examination isolated Trichophyton mentagrophytes. Abundant hyphae with the formation of arthrospores were found on the nail's surface, forming small fungal colonies. These findings showed the great capacity for dissemination of this form of onychomycosis. PMID:26560225

  18. Metodologia para obtenção do hidrograma de escoamento superficial em encostas e canais. Parte I: desenvolvimento e avaliação Methodology for obtention of superficial flow hydrograph in hillsides and canals. Part I: development and evaluation

    Directory of Open Access Journals (Sweden)

    José M. A. Silva

    2006-12-01

    Full Text Available Desenvolveu-se uma metodologia que permite obter o hidrograma de escoamento superficial e a vazão máxima para qualquer posição ao longo de uma encosta e para seções transversais de canais utilizando o modelo de ondas cinemáticas. A área da encosta é dividida num sistema matricial composto por 100 linhas e 100 colunas. Na encosta, considera-se que o escoamento ocorre na direção da declividade e que a vazão de cada pixel é a soma da vazão produzida nesse com a vazão advinda dos pixels que contribuem com o escoamento superficial para o pixel em análise. No canal, a vazão é calculada pela soma dos hidrogramas advindos das colunas do sistema reticulado. A comparação entre os valores de lâmina e vazão máxima de escoamento superficial obtidas experimentalmente e calculadas em duas condições (encosta e bacia permitiu evidenciar que a metodologia, comparada aos métodos Racional e do Número da Curva, ofereceu boas estimativas tanto da lâmina quanto da vazão máxima de escoamento superficial.It was developed a methodology that allows obtaining the hydrograph of superficial flow and maxim flow of any position along a hillside and transversal sections of canals. The area of the hillside is divided in a matrix system having 100 lines and 100 columns. It was considered that the flux occurs in the direction of the hillside's slope and the flow of each pixel is the addition between its own flow and the flows that come from the pixels that contribute to the superficial flow in the pixel under analysis. In the canal the flow is taken as the addition of the hydrographs that come from the columns in the reticular system. By the new methodology the comparison of the total volume and maximum surface runoff flow values, obtained in two experimental conditions (hillside and hydrographic basin, allowed to conclude that the new model provided good performance when compared to the Rational Method and the Curve Number Method.

  19. Evaluación in vitro de la rugosidad superficial y la alteración de color de dos tipos de ionómeros de vidrio, luego de ser sometidos a diferentes bebidas

    Directory of Open Access Journals (Sweden)

    Marisol Carrillo Tabakman

    2017-07-01

    Full Text Available El objetivo de este estudio in vitro fue analizar la rugosidad superficial y la alteración de color de dos tipos de ionómeros vítreos luego de ser sometidos a diferentes soluciones. En una matriz de teflón (8x2mm, fueron confeccionados 60 cuerpos de prueba con 2 tipos de ionómeros fotopolimerizables: 30 para el Fuji II LC (M1 y otros 30 para el Ketac N100 (M2. El aparato utilizado fue el Elipar Freelight 2 3M Espe. La fotopolimerización se realizó por 20 segundos cada cuerpo de prueba. Luego de la confección, los sesenta cuerpos de prueba fueron mantenidos en gasa humedecida por 24 hs en estufa a 37ºC y luego se clasificaron y luego se dividieron en tres grupos de 10 cada uno para ser sometidos a 3 tipos diferentes de soluciones: agua destilada (S1, bebida carbonatada (S2 y jugo cítrico (S3 por 90 segundos diariamente durante 14 días. Las lecturas de la alteración de color, obtenidas a través de un colorímetro, y las de rugosidad superficial, realizadas por medio del rugosímetro, fueron realizadas a las 48 hs. (T0 y luego a los 14 días (T1. Los resultados obtenidos fueron sometidos al test ANOVA y Tukey (p≤0.05. Los resultados mostraron que; a La bebida carbonatada (S2 tuvo mayor media de alteración de color (ΔE* en relación a las otras soluciones, b que Ketac N100 (M2 tuvo mayor media con respecto a la rugosidad superficial en la interacción material por solución. Por tanto, se concluyó que trascurrido determinado período de tiempo las propiedades estéticas y físico-mecánicas de los materiales estudiados se ven afectados.

  20. Cultivo de microalgas para la fabricación de biopetroleo por licuefacción

    OpenAIRE

    Reguera Álvarez, Ricardo

    2013-01-01

    El objetivo obtener un barril de petróleo procedente del tratamiento hidrotermico de 20g de biomasa en 150ml de agua; procedente de la Chlorella vulgaris, mediante un crecimiento de alta densidad en fotobiorreactores tubulares. La capacidad productiva en volumen del cultivo es de 0.90 g/ld-1 y una productividad por área de 66.47 g/m2d-1. El consumo energético total de 309.44 Kwh, y una potencia por superficie en la fase exponencial de 2.58 w/m2

  1. Medicina regenerativa y superficie ocular Regenerative medicine and ocular surface

    Directory of Open Access Journals (Sweden)

    Taimi Cárdenas Díaz

    2012-06-01

    Full Text Available En los últimos años se ha producido un extraordinario avance en los conocimientos relacionados con diferentes ramas biomédicas, entre ellas, la biología celular. Esto ha dado un notable impulso a una nueva rama de la medicina denominada medicina regenerativa. Esta nueva disciplina médica se basa fundamentalmente en los nuevos conocimientos sobre las células madre y en su capacidad de convertirse en células de diferentes tejidos. Una de las estructuras que tiene más interés, desde el punto de vista de la medicina regenerativa, es la superficie ocular. Por esto, se ha logrado notables progresos en la reconstrucción de la superficie ocular mediante la aplicación de procederes regenerativos. Los cultivos de células del epitelio corneal humano están siendo utilizados en el tratamiento de la insuficiencia limbar. Esto permite disminuir la incidencia de opacidades tipo Haze tras queratectomía fotorrefractiva, acelerar la curación y evitar la aparición de leucomas en pacientes con defectos epiteliares persistentes e intentar disminuir la incidencia de opacidades corneales en pacientes sometidos a queratectomía fototerapéutica por diferentes distrofias corneales.In the last few years, an extraordinary advance has taken place in the knowledge about several biomedical branches as is the case of cellular biology, which has remarkably encouraged the development of a new medical branch called regenerative medicine. This medical discipline is fundamentally based on the new knowledge on the stem cells and their capacity to become cells for different tissues. One of the most interesting structures for the regenerative medicine is the ocular surface. In the last few years, significant advances have been achieved in the field of the ocular surface reconstruction with regenerative procedures. Some cell cultures of the human corneal epithelium are being used to treat limber insufficiency, to reduce the incidence of haze-type opacities after

  2. Clinico Mycological Study of Superficial Mycoses

    Directory of Open Access Journals (Sweden)

    Rachana J. Magdum

    2016-10-01

    Full Text Available Background: Generally it is well established fact that geographical distribution of the fungi may change from time to time; hence this study was planned. Aim and Objectives: To analyze the prevalence of superficial mycoses, its clinical presentation and species identification of the fungal isolates responsible for the disease. Material and Methods: A total 125 clinically diagnosed cases of superficial mycoses visiting Dermatology and Venereology outpatient department of Bharati Hospital, Sangli, for a period of one year were included in the study. Specimens like skin scrapping, nail clipping, hair were collected and subjected to KOH mount and culture. Identification of species was done by macroscopic examination of culture, tease mount and other physiological tests including Urease test, Hair perforation tests and Germ tube test. Results: Superficial mycosis was more common in the age group of 21-30 years (28% and in males (60.8%. The infection was more common in students (29.6%. Tinea corporis (42.4% was the commonest clinical type followed by tinea cruris (22.4%. 61.6% cases were positive by direct microscopy and 60.8% cases showed culture positive. Out of 125 samples, dermatophytes were grown in 63 cases (82.89% followed by non dermatophytic moulds in 10 cases (13.16% and Candida albicans in 3 cases (3.95%. The most common isolate among dermtophytosis was T. rubrum (46.05% followed by T. mentagrophyte (25%. Conclusion: It was concluded that along with dermatophytes, non dermatophytic moulds are also important to cause of superficial mycoses

  3. Characterization of a porcine model of chronic superficial varicose veins.

    Science.gov (United States)

    Jones, Gregory T; Grant, Mark W; Thomson, Ian A; Hill, B Geraldine; van Rij, André M

    2009-06-01

    Previous animal models of venous disease, while inducing venous hypertension and valvular insufficiency, do not produce superficial varicose veins. In this study, we aimed to develop and characterize a pig-based model of superficial varicose veins. Right femoral arteriovenous fistulae (AVF) were surgically fashioned in young adult pigs. Animals were examined at postoperative times up to 15 weeks to determine the development of varicose veins and measurement of both blood pressure and flow velocities within the superficial thigh veins. Histology and vascular corrosion casts were used to characterize the resulting structural venous alterations. Porcine pathophysiological features were compared with those of human primary superficial varicose veins. Gross superficial varicosities developed over the ipsilateral medial thigh region after an initial lag period of 1-2 weeks. Veins demonstrated retrograde filling with valvular incompetence, and a moderate, non-pulsatile, venous hypertension, which was altered by changes in posture and Valsalva. Venous blood flow velocities were elevated to 15-30 cm/s in varicose veins. Structurally, pig varicose veins were enlarged, tortuous, had valvular degeneration, and regions of focal medial atrophy with or without overlying intimal thickening. The superficial varicose veins, which developed within this model, have a pathophysiology that is consistent with that observed in humans. The porcine femoral AVF model is proposed as a suitable experimental model to evaluate the pathobiology of superficial venous disease. It may also be suitable for the evaluation of treatment interventions including drug therapy.

  4. Superficial herpes simplex virus wound infection following lung transplantation.

    Science.gov (United States)

    Karolak, Wojtek; Wojarski, Jacek; Zegleń, Sławomir; Ochman, Marek; Urlik, Maciej; Hudzik, Bartosz; Wozniak-Grygiel, Elzbieta; Maruszewski, Marcin

    2017-08-01

    Surgical site infections (SSIs) are infections of tissues, organs, or spaces exposed by surgeons during performance of an invasive procedure. SSIs are classified into superficial, which are limited to skin and subcutaneous tissues, and deep. The incidence of deep SSIs in lung transplant (LTx) patients is estimated at 5%. No reports have been published as to the incidence of superficial SSIs specifically in LTx patients. Common sense would dictate that the majority of superficial SSIs would be bacterial. Uncommonly, fungal SSIs may occur, and we believe that no reports exist as to the incidence of viral wound infections in LTx patients, or in any solid organ transplant patients. We report a de novo superficial wound infection with herpes simplex virus following lung transplantation, its possible source, treatment, and resolution. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  5. The influence of cutting speed and feed rate in surface integrity of aisi 1045//Influencia de la velocidad de corte y la velocidad de avance en la integridad superficial del acero aisi 1045

    Directory of Open Access Journals (Sweden)

    Mario Jacas-Cabrera

    2015-09-01

    Full Text Available El objetivo de esta investigación es el estudio de la influencia de la velocidad de corte y la velocidad de avance en la integridad superficial del acero AISI-1045, sometido a un proceso de torneado. Las probetas se sometieron a un tratamiento térmico de recocidos (81 HRB. En el trabajo se empleó un diseño experimental 32, con dos variables a tres niveles experimentales, para un total de nueve experimentos, los que fueron replicados. La integridad superficial fue evaluada con la medición de la rugosidad superficial, las tensiones residuales superficiales, la medición de dureza por nano–indentación y por el análisis de la de formación terciaria. Los resultados determinaron la gran influencia de la velocidad de avance en la rugosidad superficial. La medición de las tensiones residuales mostró la influencia de las variables de corte. Del análisis microestructural se observó la existencia de dos zonas de deformación determinándose que el espesor de la zona endurecida llegó a 50 µm. Palabras claves: integridad superficial, rugosidad superficial, nano-indentación; superficie deformada____________________________________________________________________________AbstractThe aim of this research is to study the influence of cutting speed and feed rate on surface integrity of AISI-1045 subjected to a turning process. The specimens were in annealed condition (81 HRB. A 32 factorial experiment design was employed using low, medium and high levels of the two variables in study, performing 9 experiments with a replica. The surfaces were evaluated through the measurements of surface roughness, surface residual stresses, nano-indentation hardness and analyzing the deformed layer. Results corroborated the great influence of feed rate on surface roughness. The results of the residual stresses have shown the influence of cutting speed as well as feed rate in the behavior of circumferential and axial stress respectively. From the analysis of the

  6. Understanding the three-dimensional anatomy of the superficial lymphatics of the limbs.

    Science.gov (United States)

    Tourani, Saam S; Taylor, G Ian; Ashton, Mark W

    2014-11-01

    There are minimal data in the current literature regarding the depth of the superficial lymphatic collectors of the limbs in relation to the various subcutaneous tissue layers. Injection, microdissection, radiographic, and histologic studies of the superficial lymphatics and the subcutaneous tissues of 32 limbs from 15 human cadavers were performed. Five layers were consistently identified in the integument of all the upper and lower limb specimens: (1) skin, (2) subcutaneous fat, (3) superficial fascia, (4) loose areolar tissue, and (5) deep fascia. Layer 2 was further divided into superficial (2a) and deep (2c) compartments by a thin, transparent, horizontal septum (layer 2b). The main superficial veins and the superficial nerves coursed in layer 4. The lymphatic collectors were found at layer 2c and layer 4. The use of consistent nomenclature to describe the subcutaneous tissue layers facilitates a greater understanding and discussion of the anatomy. In lymphovenous anastomosis for the treatment of lymphedema, indocyanine green lymphography is an unreliable method for identification of the superficial collectors of the thigh. The medial proximal leg, the dorsum of the wrist over the anatomical snuffbox, and the volar proximal forearm provide suitable areas for locating superficial collectors with nearby matching size veins. In vertical medial thigh lift, choosing a dissection plane superficial to the great saphenous vein is unlikely to preserve the collectors of the ventromedial bundle.

  7. Social network extraction based on Web: 1. Related superficial methods

    Science.gov (United States)

    Khairuddin Matyuso Nasution, Mahyuddin

    2018-01-01

    Often the nature of something affects methods to resolve the related issues about it. Likewise, methods to extract social networks from the Web, but involve the structured data types differently. This paper reveals several methods of social network extraction from the same sources that is Web: the basic superficial method, the underlying superficial method, the description superficial method, and the related superficial methods. In complexity we derive the inequalities between methods and so are their computations. In this case, we find that different results from the same tools make the difference from the more complex to the simpler: Extraction of social network by involving co-occurrence is more complex than using occurrences.

  8. [Superficial venous thrombosis. A state of art].

    Science.gov (United States)

    Sándor, Tamás

    2017-01-01

    For a long time superficial thrombophlebitis has been thought to be a rather benign condition. Recently, when duplex ultrasound technique is used for the diagnosis more and more often, the disease is proved to be more dangerous than anticipated. Thrombosis propagates to the deep veins in 6-44% and pulmonary embolism was observed on the patients in 1,5-33%. We can calculate venous thromboembolic complications on every fourth patient. Diagnosis is clinical, but duplex ultrasound examination is mandatory, for estimation of the thrombus extent, for exclusion of the deep venous thrombosis and for follow up. Both legs should be checked with ultrasound, because simultaneous deep venous thrombosis can develop on the contralateral limb. Two different forms can be distinguished: superficial venous thrombosis with, or without varicose veins. In cases of spontaneous, non varicous form, especially when the process is migrating or recurrent, a careful clinical examination is necessery for exclusion of malignant diseases and thrombophilia. The treatment options are summarised on the basis of recent international consensus statements. The American and German guidelines are similar. Compression and mobilisation are cornerstones of the therapy. For a short segment thrombosis non steroidal antiinflammatory drugs are effective. For longer segments low molecular-weight heparins are preferred. Information on the effect of the novel oral anticoagulants for the therapy is lacking but they may appear to be effective in the future for this indication. When thrombus is close to the sapheno-femoral or sapheno-popliteal junction crossectomy (high ligation), or low molecular-weight heparin in therapeutic doses are indicated. The term superficial thrombophlebitis should be discouraged, because inflammation and infection is not the primary pathology. It should be called correctly superficial venous thrombosis in order to avoid the unnecessary administration of antibiotics and the misconception

  9. Determinación de arsénico y mercurio en agua superficial del lago de Atitlán

    Directory of Open Access Journals (Sweden)

    Juan Francisco Pérez Sabino

    2015-11-01

    Full Text Available El lago de Atitlán, considerado uno de los lagos más bellos del mundo, tiene una superficie de 125.7 km2, una profundidad máxima de aproximadamente 350 m, y se encuentra en el departamento de Sololá, en el occidente de Guatemala. Desde 2009 se han observado floraciones extensivas de cianobacterias en el lago, reflejando la contaminación del agua en la cuenca. Se determinaron los niveles de arsénico (As y mercurio (Hg en agua superficial del lago de Atitlán, por espectrofotometría de absorción atómica (EAA, en cuatro muestreos realizados en marzo, mayo, agosto y octubre de 2014 en 14 sitios. Diez sitios se encuentran localizados en el lago, habiendo sido definidos en estudios anteriores con base en su cercanía a poblaciones asentadas en la orillas del lago. Dos sitios corresponden a los principales ríos tributarios, y los restantes dos sitios a la entrada y salida de la planta de tratamiento Los Cebollales, ubicada en Panajachel. Los niveles de As encontrados en el lago de Atitlán, tributarios y en la planta de tratamiento, fueron superiores a 20 μg/L. Los resultados indican que la contaminación del lago de Atitlán por As se debe principalmente a la geología de la cuenca, al localizarse en una zona volcánica. Los niveles cuantificables de As, son superiores al nivel máximo permitido para agua potable en la Norma de Agua Potable (NGO 29001:99 de la Comisión Guatemalteca de Normas (COGUANOR, por lo que el agua del lago de Atitlán no se considera apta para el consumo humano.

  10. Ensayos de calefacción por «glorias»

    Directory of Open Access Journals (Sweden)

    Laorden, J.

    1961-01-01

    Full Text Available En el presente trabajo se describen los ensayos realizados haciendo circular los humos de una chimenea a través de un suelo hueco para calentarlo. Los humos salen de la chimenea, recorren el suelo de las habitaciones y vuelven a la chimenea para ser expulsados al exterior. Esta circulación indirecta de los humos se hace, bien por tiro natural de los humos o mediante un tiro forzado provocando por un ventilador axial. Los ensayos han demostrado que los humos pueden calentar una superficie de unos 40 metros cuadrados de suelo. Volviendo otra vez al origen, pero hace falta emplear el ventilador para conseguir que no haya revoco de los humos dentro de la habitación en que está el hogar.

  11. Implementación de un procedimiento metodológico para la elaboración de piezas por bruñido con rodillo simple.

    Directory of Open Access Journals (Sweden)

    S. Díaz Rojas,

    2009-01-01

    Full Text Available En el presente trabajo se exponen los fundamentos y los resultados de investigaciones realizadas sobre la operación secundaria de acabado superficial de piezas conocida como bruñido por rodillo simple.Se abordan teóricamente las cuestiones más importantes de los procesos de deformación plástica superficial empleados para el mejoramiento de las cualidades superficiales de las piezas.Se realiza una investigación experimental en piezas simétrico-rotativas de acero AISI 1045 en un torno paralelo convencional con una herramienta de bruñir mono rodillo construida al efecto, donde se toman en consideración las variables más influyentes en el bruñido por rodillo simple: fuerza compresiva, avance y número de pasadas de la herramienta bruñidora. Se obtienen los modelos empírico-matemáticos que describen los efectos de estas variables en el incremento de la dureza y la calidad superficial final de la pieza, así como en la disminución del diámetro exterior y en la profundidad de la capa endurecida. Como resultado más importante de este trabajo, se desarrolla un procedimiento metodológico para la elaboración de piezas mediante este tipo de tratamiento mecánico por deformación plástica superficial, que permitirá la creación y difusión de una disciplina tecnológica sobre un proceso de fabricación que posee ventajas y que está poco difundido en las empresas metalmecánicas.In the present work the foundations and the results of the investigation for the secondary operation of superficial finish (single roller burnishing are presented. The most important aspects of the superficial plastic deformation process for improving superficial finish are approachedAn experimental investigation in symmetrical-revolving pieces of steel AISI 1045 in a conventional parallel lathe with a burnishing tool of single roller built to the effect is carried out. The most influential variables were took in consideration: compressive force, feed and number

  12. Adsorción física de gases y vapores por carbones

    OpenAIRE

    Martín-Martínez, José Miguel

    1990-01-01

    El establecimiento de las características texturales de carbones es esencial para su utilización en procesos industriales. La evaluación de la textura porosa de carbones se suele realizar mediante adsorción de gases y vapores. Por esta razón, en este libro se pretende plantear las principales estrategias más generalmente empleadas para cualificar la superficie y porosidad de carbones.

  13. Hydric properties of some iberian ornamental granites with different superficial finishes: a petrophysical interpretation

    Directory of Open Access Journals (Sweden)

    Rojo, A.

    2003-03-01

    Full Text Available Some physical properties of three ornamental granites with different superficial finishes (polished, sawn and flamed were quantified by standard tests. These granites are commercially known as Rosa Porrino, Rosavel and Blanco Alcazar. The determined properties were: density, open porosity, water absorption, capillarity, evaporation, vapour absorption and water vapour permeability. The values of the hydric properties in the studied granites fundamentally depended on their textural characteristics, mainly grain size, micro cracking network and open porosity, and, to a lesser extent, on their superficial finish.

    El estudio analiza las diferencias en el comportamiento hídrico de tres granitos con diferentes acabados superficiales: pulido, corte de sierra y chorro de fuego. Estos granitos se comercializan con los nombres de Rosa Porrino, Rosavel y Blanco Alcázar. Las propiedades determinadas han sido: densidad, porosidad abierta, absorción libre de agua, absorción de vapor de agua, absorción de agua por capilaridad, evaporación y permeabilidad al vapor de agua. Los valores de las propiedades hídricas determinadas dependen fundamentalmente de las características texturales: tamaño de grano, microfisuras y porosidad abierta y, en menor medida, de los acabados superficiales.

  14. Major Superficial White Matter Abnormalities in Huntington's Disease

    Science.gov (United States)

    Phillips, Owen R.; Joshi, Shantanu H.; Squitieri, Ferdinando; Sanchez-Castaneda, Cristina; Narr, Katherine; Shattuck, David W.; Caltagirone, Carlo; Sabatini, Umberto; Di Paola, Margherita

    2016-01-01

    Background: The late myelinating superficial white matter at the juncture of the cortical gray and white matter comprising the intracortical myelin and short-range association fibers has not received attention in Huntington's disease. It is an area of the brain that is late myelinating and is sensitive to both normal aging and neurodegenerative disease effects. Therefore, it may be sensitive to Huntington's disease processes. Methods: Structural MRI data from 25 Pre-symptomatic subjects, 24 Huntington's disease patients and 49 healthy controls was run through a cortical pattern-matching program. The surface corresponding to the white matter directly below the cortical gray matter was then extracted. Individual subject's Diffusion Tensor Imaging (DTI) data was aligned to their structural MRI data. Diffusivity values along the white matter surface were then sampled at each vertex point. DTI measures with high spatial resolution across the superficial white matter surface were then analyzed with the General Linear Model to test for the effects of disease. Results: There was an overall increase in the axial and radial diffusivity across much of the superficial white matter (p < 0.001) in Pre-symptomatic subjects compared to controls. In Huntington's disease patients increased diffusivity covered essentially the whole brain (p < 0.001). Changes are correlated with genotype (CAG repeat number) and disease burden (p < 0.001). Conclusions: This study showed broad abnormalities in superficial white matter even before symptoms are present in Huntington's disease. Since, the superficial white matter has a unique microstructure and function these abnormalities suggest it plays an important role in the disease. PMID:27242403

  15. Estudio del efecto de diferentes compuestos antifúngicos para la aplicación en superficie de quesos maduros

    OpenAIRE

    Míguez Pérez, Javier

    2015-01-01

    El queso, como producto industrial, debe conservar su inocuidad durante largos periodos de tiempo ya que, debido a sus características fisicoquímicas, es un alimento susceptible al deterioro por mohos, provocando pérdidas económicas a nivel industrial. Durante este proyecto se han llevado a cabo diversos estudios enfocados a la inhibición del crecimiento y proliferación de moho en la superficie de quesos de cabra, utilizando distintos recubrimientos a los que se les han añadido diferentes com...

  16. Influência da temperatura, da massa molar e da distribuição de massa molar na tensão superficial de PS, PP e PE: experimento e teoria

    Directory of Open Access Journals (Sweden)

    Moreira José C.

    2003-01-01

    Full Text Available Neste trabalho a influência da temperatura, da massa molar (n e da distribuição de massa molar (MWD na tensão superficial de poliestireno (PS foi avaliada utilizando o método da gota pendente. A influência da temperatura na tensão superficial de polipropileno isotático (i-PP e de polietileno de baixa densidade (PELBD também foi estudada aqui. As teorias de Patterson-Rastogi e Dee-Sauer foram utilizadas em conjunção com a teoria de equação de estado de Flory, Orwoll, e Vrij (FOV para prever a tensão superficial (gama utilizando dados de pressão-volume-temperatura (PVT dos polímeros. Ambas teorias prevêem que a tensão superficial diminui linearmente com o aumento da temperatura e aumenta com a massa molar concordando com os resultados experimentais. Entretanto, ambas teorias subestimam a mudança de entropia de formação de superfície por unidade de área a volume constante para sistemas poliméricos de baixa massa molar e polidisperso e subestimam o efeito da distribuição de massa molar na tensão superficial

  17. Preparación de tamices moleculares de carbono por CVD

    OpenAIRE

    Manso, R.; Pajares Somoano, Jesús Alberto; Albiniak, A.; Broniek, E.; Siemieniewska, T.

    2001-01-01

    [ES] Se han preparado tamices moleculares de carbono (CMS) mediante el dep sito de tomos de carbono, por pir lisis de benceno, sobre la superficie de carbones activados. La pir lisis de benceno a temperaturas comprendidas entre 650-850 ¼C genera el cierre progresivo de los microporos debido a la creaci n de constricciones en la red microporosa que limitan la accesibilidad de determinadas mol culas. El uso de temperaturas superiores a la temperatura de carbonizaci n del precursor (85...

  18. Effect of repeated microwave disinfection on surface roughness and baseplate adaptation of denture resins polymerized by different techniques = Efeito da desinfecção repetida por microondas sobre rugosidade superficial e adaptação de bases de resinas polimerizadas por diferentes técnicas

    Directory of Open Access Journals (Sweden)

    Campos, Maria Agnese Pinto de

    2009-01-01

    Full Text Available Objetivo: Avaliar o efeito cumulativo de dois protocolos de desinfecção por energia de micro-ondas (Protocolo 1: 690 W/6 min; Protocolo 2: 345 W/6 min na rugosidade superficial (Ra e adaptação de bases de dentadura de duas resinas polimerizadas por micro-ondas (Onda Cryl ou banho de água quente (QC-20. Metodologia: Para Ra, espécimes retangulares foram fabricados e divididos de acordo com o tratamento de desinfecção (n=8/grupo: 1 Controle (sem desinfecção, 2 Protocolo 1, e 3 Protocolo 2. Para medir Ra usou-se um rugosímetro no baseline (T0 e após 2 procedimentos de desinfecção (T1, T2 com intervalo de 7 dias de imersão em água destilada. Para avaliar a estabilidade dimensional, bases maxilares foram divididas nos 3 grupos (n=6 e a adaptação foi medida por pesagem de uma película de silicone que reproduzia o espaço entre a base de resina e um modelo-mestre metálico. Resultados: Para Ra, houve interação significativa entre tipo de resina e técnica de polimerização, tratamento de desinfecção, e número de procedimentos desinfecção (P<0,001. Os grupos Protocolo 2 e controle apresentaram aumento semelhante de Ra ao longo do tempo, mas os grupos Protocolo 1 tiveram uma redução significativa de Ra em T2. A adaptação da base foi afetada por uma interação significante entre tratamento de desinfecção e número de procedimentos de desinfecção (P<0,001; o Protocolo 1 apresentou a maior média em T2. Conclusão: Onda Cryl teve maiores alterações de Ra e adaptação que QC-20. O Protocolo 1 promoveu dano geral para ambos os tipos de resina após dois procedimentos de desinfecção

  19. VARIABILIDAD DE LA TEMPERATURA DE SUPERFICIES EN EL NW DE LA PROVINCIA DE NEUQUÉN A PARTIR DE INFORMCIÓN SATELITAL.

    Directory of Open Access Journals (Sweden)

    Marisa G. Cogliati

    2008-12-01

    Full Text Available La complejidad del terreno y la falta de datos meteorológicos siguiendo el gradiente altitudinal obliga a la exploración de nuevos métodos o esquemas entre los que se encuentra el análisis por medio de modelos o imágenes satelitales. El presente trabajo pretende describir el marco de información con el que se cuenta en el NW neuquino y la introducción de análisis espacial de distribución de la temperatura de superficie a partir de imágenes NOAA- AVHRR con miras a la inclusión futura de nuevos esquemas de estudio. La temperatura del aire presenta gran variabilidad espacial, principalmente en los valores mínimos, una idea de esta distribución puede asociarse a la temperatura de superficie que es obtenida a partir del análisis de imágenes NOAA-AVHRR. Este trabajo presenta el análisis de situaciones particulares de la temperatura de superficie de la zona NW de la Provincia de Neuquén utilizando imágenes de satélites NOAA en alta resolución (AVHRR e imágenes LANDSAT de la región. La temperatura de superficie obtenida utilizando la información de los canales 4 y 5 del sensor AVHRR presenta la distribución espacial de la temperatura del suelo que pone en evidencia la complejidad del comportamiento, asociado al relieve. Se observa la dependencia de las isotermas con la altura, alcanzando los menores valores de temperatura de superficie en los picos. Esta metodología permitiría incorporar información cuya escala consideraría con mayor detalle que en escala sinóptica de la temperatura de superficie de píxeles de aproximadamente 1 km2. El análisis posterior de una mayor cantidad de situaciones, permitiría realizar mapas estacionales de temperatura de superficie en una escala que no es posible obtener con el instrumental que se encuentra instalado en este momento, pudiendo asociarse posteriormente al comportamiento de la temperatura del aire.

  20. Estudio in vitro del efecto erosivo en la superficie del esmalte dentario, por acción de tres bebidas artificiales no alcohólicas, valorado a través de la microdureza adamantina

    Directory of Open Access Journals (Sweden)

    Fernando Ramiro Guanoluisa

    2014-12-01

    Full Text Available Uno de los problemas que los odontólogos atienden cada vez con mayor frecuencia son los desgastes dentales, que incluyen a la erosión, caracterizada por la pérdida crónica de la estructura mineral del diente por acción de ácidos no bacterianos. Se comparó el efecto erosivo en la superficie de esmalte dentario por acción de tres bebidas de alto consumo en la ciudad de Quito, a través de la valoración de la microdureza adamantina inicial y final, con el empleo del microdurómetro Rockwell. Para lo cual se utilizaron 65 bloques de esmalte con una dureza inicial entre, 320 y 366 Kg/mm2 según la escala Knoop. Los cuales fueron divididos en 32 y 33 elementos, para dos protocolos erosivos (con y sin saliva natural. Las bebidas empleadas fueron: Coca-Cola, Gatorade y V220; cada grupo fue sometido 10 minutos diarios por un período de 5 días a la acción de cada bebida (siendo omitido este paso en los grupos control. Al sexto día, se midió nuevamente la microdureza para determinar el objetivo propuesto. Los resultados fueron analizados con ANOVA, prueba Tukey y Prueba-T. Se concluyó que al aplicar los dos protocolos, hubo una disminución significativa de la microdureza del esmalte, siendo mayor en el que no se incluyó la saliva, donde sobresale la Coca-Cola (pH: 2,64 ya que la erosión guardó relación inversa con el pH de la bebida (a menor pH, mayor erosión. En cambio, cuando el esmalte estuvo expuesto a saliva, la erosión guardó relación con la composición y efervescencia de los productos, resultando ser el V220, el que presentó mayor erosión.

  1. Superficial or deep implantation of motor nerve after denervation: an experimental study--superficial or deep implantation of motor nerve.

    Science.gov (United States)

    Askar, Ibrahím; Sabuncuoglu, Bízden Tavíl

    2002-01-01

    Neurorraphy, conventional nerve grafting technique, and artificial nerve conduits are not enough for repair in severe injuries of peripheral nerves, especially when there is separation of motor nerve from muscle tissue. In these nerve injuries, reinnervation is indicated for neurotization. The distal end of a peripheral nerve is divided into fascicles and implanted into the aneural zone of target muscle tissue. It is not known how deeply fascicles should be implanted into muscle tissue. A comparative study of superficial and deep implantation of separated motor nerve into muscle tissue is presented in the gastrocnemius muscle of rabbits. In this experimental study, 30 white New Zealand rabbits were used and divided into 3 groups of 10 rabbits each. In the first group (controls, group I), only surgical exposure of the gastrocnemius muscle and motor nerve (tibial nerve) was done without any injury to nerves. In the superficial implantation group (group II), tibial nerves were separated and divided into their own fascicles. These fascicles were implanted superficially into the lateral head of gastrocnemius muscle-aneural zone. In the deep implantation group (group III), the tibial nerves were separated and divided into their own fascicles. These fascicles were implanted around the center of the muscle mass, into the lateral head of the gastrocnemius muscle-aneural zone. Six months later, histopathological changes and functional recovery of the gastrocnemius muscle were investigated. Both experimental groups had less muscular weight than in the control group. It was found that functional recovery was achieved in both experimental groups, and was better in the superficial implantation group than the deep implantation group. EMG recordings revealed that polyphasic and late potentials were frequently seen in both experimental groups. Degeneration and regeneration of myofibrils were observed in both experimental groups. New motor end-plates were formed in a scattered

  2. Remoción de cromo vi de soluciones acuosas por adsorción sobre carbones activados modificados

    OpenAIRE

    Céspedes, Nubia; Valencia, Jesús; Díaz, José de Jesús

    2009-01-01

    En este trabajo se determina la adsorción de Cr6+ de disoluciones acuosas en dos carbones activados comerciales en función del grado de modificación (reducción, oxidación) de la superficie de los adsorbentes con tratamientos térmicos en presencia de hidrógeno, oxígeno y ácido nítrico. La química superficial de los carbones activados originales y modificados se examina por los métodos de titulaciones de Böehm y descomposición con temperatura programada (DTP). Los ensayos de evaluación de la c...

  3. DRENAGEM SUPERFICIAL DE SOLOS ARGILOSOS DO NORTE DO PARANÁ

    Directory of Open Access Journals (Sweden)

    Rogério Teixeira de Faria

    1999-08-01

    Full Text Available RESUMO Foi avaliado o desempenho de práticas de drenagem superficial e cobertura morta em uma área de várzea do norte do Paraná. Antes e após o cultivo do arroz, foram comparadas as taxas de drenagem em tratamentos com e sem drenos torpedo e determinadas a vazão e a obstrução dos condutos. Sob o cultivo do feijoeiro, foram avaliados os efeitos dos drenos torpedo e de "camas" na drenagem e de cobertura morta (palha de arroz na retenção de água do solo. Os resultados indicaram que os drenos torpedo foram mais eficientes se construídos com solo menos úmido, porém sua longevidade foi menor que um ano. Sob o feijoeiro, os drenos torpedo e cobertura morta mantiveram o lençol freático mais profundo e o solo com menor tensão de umidade, mas esses efeitos ocorreram abaixo da zona radicular (15 cm, resultando em baixa produtividade.

  4. HISTOPATHOLOGY OF MARGINAL SUPERFICIAL PERIODONTIUM AT MENOPAUSE

    Directory of Open Access Journals (Sweden)

    A. Georgescu

    2012-03-01

    Full Text Available Premises: Sexual hormones may affect the general health condition of women, as early as puberty, continuing during pregnancy and also after menopause. Variations of the hormonal levels may cause different – either local or general – pathological modifications. Sexual hormones may also affect periodontal status, favourizing gingival inflammations and reducing periodontal resistance to the action of the bacterial plaque. Scope: Establishment of the correlations between the debut or the manifestation of menopause and the modifications produced in the superficial periodontium. Materials and method: Clinical and paraclinical investigations were performed on female patients with ages between 45 and 66 years, involving macroscopic, microscopic and radiological recording of the aspect of the superificial periodontium (gingiva. Results: Analysis of the histological sections evidenced atrophic and involutive modifications in the marginal superficial periodontium of female patients at menopause. Conclusions: Sexual hormones intervene in the histological equilibrium of the marginal superficial periodontium, influencing the periodontal health status, which explains the correlation between the subjective symptomatology specific to menopause and the histopatological aspect at epithelial level.

  5. Diagnosis and treatment of superficial esophageal cancer.

    Science.gov (United States)

    Barret, Maximilien; Prat, Frédéric

    2018-01-01

    Endoscopy allows for the screening, early diagnosis, treatment and follow up of superficial esophageal cancer. Endoscopic submucosal dissection has become the gold standard for the resection of superficial squamous cell neoplasia. Combinations of endoscopic mucosal resection and radiofrequency ablation are the mainstay of the management of Barrett's associated neoplasia. However, protruded, non-lifting or large lesions may be better managed by endoscopic submucosal dissection. Novel ablation tools, such as argon plasma coagulation with submucosal lifting and cryoablation balloons, are being developed for the treatment of residual Barrett's esophagus, since iatrogenic strictures still hamper the development of extensive circumferential resections in the esophagus. Optimal surveillance modalities after endoscopic resection are still to be determined. The assessment of the risk of lymph-node metastases, as well as of the need for additional treatments based on qualitative and quantitative histological criteria, balanced to the patient's condition, requires a dedicated multidisciplinary team decision process. The need for trained endoscopists, expert pathologists and surgeons, and specialized multidisciplinary meetings underlines the role of expert centers in the management of superficial esophageal cancer.

  6. Local superficial hyperthermia in combination with low-dose radiation therapy for palliation of superficially localized metastases

    International Nuclear Information System (INIS)

    Owczarek, G.; Miszczyk, L.

    2005-01-01

    Full text: The aim of this study is to evaluate the response of superficially located metastases and local toxicity to microwave hyperthermia combined with radiation therapy. From May 2003 through December 2004 58 patients (33 male, 25 female; mean age 60 years) with lymph nodes or skin metastases were treated with microwave superficial hyperthermia combined with low-dose radiation therapy. Hyperthermia was administered twice weekly with high frequency applicator (∼900 Mhz) with water bolus. The temperature was set to 43 o C for 45 minutes. Radiotherapy was performed daily with dose 2 Gy or 4 Gy per fraction, to a total dose 20 Gy. There were 47 patients with carcinoma, 4 with sarcoma, 7 with melanoma. Treated regions were: head and neck (37 patients), chest wall 8, abdomen wall and groins 4, upper and lower limb 2 and 8 patients respectively. Primary tumor sites were: head and neck region (9 patients), lung 15, alimentary tract 8, breast 5, soft tissue 8, urogenital 4 and 9 patients with primary tumor site unknown. The toxicity was evaluated using 6 step scale: 0-no skin reaction, 1-faint red mark, 2-distinct red mark, 3-blisters, 4-brown mark, 5-necrosis. Presence of pain and its intensity were also analyzed. Diameter of tumor after the treatment was observed. Complete response was achieved in 5 patients (8.5 %), and partial response in 29 patients (50 %), no response was observed in 12 patients (20 %) and progression of tumor in 7 patients (12 %). No skin reaction was observed in 3 patients, faint red mark in 14 patients, distinct red mark in 28 patients, blisters in 8 patients, brown mark in 4 patients and necrosis in 1 patient. The pain occurred in 9 patients but it was no the cause of stopping treatment. Local superficial hyperthermia combined with low-dose radiation therapy is an effective method of treatment in a proportion of patients with superficial metastases. This combination of treatment modalities is well tolerated and is useful for palliation

  7. Microbiota de jamones de cerdo cocidos asociada al deterioro por abombamiento del empaque

    Directory of Open Access Journals (Sweden)

    Juliana Ossa

    2010-08-01

    Full Text Available Objetivo. Caracterizar la diversidad microbiana y calidad microbiológica e higiénico sanitaria de diferentes marcas de jamones de cerdo cocidos abombados y no abombados comprados en varios supermercados de Bogotá D.C. Materiales y métodos. Se analizaron 10 marcas diferentes de jamones de cerdo cocidos comprados en tres supermercados, refrigerados bajos las mismas condiciones del consumidor, durante 45 días. Se realizó los recuentos en placa de microorganismos de interés en la industria de alimentos y de inocuidad en las muestras con o sin distensión del empaque e identificación por pruebas bioquímicas y PCR para determinar la diversidad de la microbiota. Se aislaron cepas productoras de biopelículas provenientes de la superficie de una planta de alimentos de una de las marcas de los jamones investigadas. Resultados. Se identificaron un total de 139 cepas aisladas del producto terminado, de las cuales un 99% (137 cepas pertenecen al grupo de Bacterias Acido Lácticas (BAL, el 1% restante son levaduras. De las 31 cepas aisladas de las superficies en la zona de tajado, el 97% (30 cepas presentaron formación de biopelículas. Se determinó ausencia de patógenos tanto en el producto terminado como en las muestras de las superficies.Conclusiones. El deterioro causado por abombamiento del empaque fue asociado a la presencia de BAL, debido a que fueron encontradas en la zona de tajado y en el producto terminado, de este último únicamente se aislaron BAL, en mayor proporción cepas correspondientes al género de Lactobacillus sp.

  8. Superficial parotidectomy via facelift incision

    NARCIS (Netherlands)

    Lohuis, Peter J. F. M.; Tan, M. Liane; Bonte, Katrien; van den Brekel, Michiel W. M.; Balm, Alfons J. M.; Vermeersch, Hubert B.

    2009-01-01

    The stigma of a visually prominent facial scar following parotid surgery can be distressing to a young patient. The surgical technique of parotidectomy via a facelift incision is described and evaluated. Thirty patients with a benign lesion of the parotid gland underwent a partial superficial

  9. Physiological Laterality of Superficial Cerebral Veins on Susceptibility-Weighted Imaging.

    Science.gov (United States)

    Matsushima, Satoshi; Shimizu, Tetsuya; Gomi, Taku; Fukuda, Kunihiko

    The purpose of this study is to evaluate whether laterality of the superficial cerebral veins can be seen on susceptibility-weighted imaging (SWI) in patients with no intracranial lesions that affect venous visualization. We retrospectively evaluated 386 patients who underwent brain magnetic resonance imaging including SWI in our institute. Patients with a lesion with the potential to affect venous visualization on SWI were excluded. Two neuroradiologists visually evaluated the findings and scored the visualization of the superficial cerebral veins. Of the 386 patients, 315 (81.6%) showed no obvious laterality on venous visualization, 64 (16.6%) showed left-side dominant laterality, and 7 (1.8%) showed right-side dominant laterality. Left-side dominant physiological laterality exists in the visualization of the superficial cerebral veins on SWI. Therefore, when recognizing left-side dominant laterality of the superficial cerebral veins on SWI, the radiologist must also consider the possibility of physiological laterality.

  10. Evaluación de los factores de riesgo y los tipos de superficie para el desarrollo de las úlceras por presión en el enfermo crítico Assessment of risk factors and the types of surface for the development of pressure ulcers on critical ill patients

    Directory of Open Access Journals (Sweden)

    Concepció Fuentes i Pumarola

    2007-06-01

    Full Text Available Objetivos: Evaluar los factores de riesgo y los tipos de superficie para el desarrollo de las úlceras por presión (UPP en el enfermo crítico ingresado en una unidad de cuidados intensivos (UCI. Material y métodos: Estudio prospectivo de incidencia de UPP. Población: Enfermos ingresados en una UCI con EMINA© de alto riesgo, estancia mínima de 48 horas y que no presentaran UPP al ingreso. Se registraron los datos demográficos, de gravedad al ingreso (SAPS II y APACHE III, diabetes, estado séptico, ventilación mecánica, incidencia y grado de UPP, y tipo de superficie de apoyo (alternante [SA] o estática [SE]. Conclusiones: Los factores de riesgo asociados con el desarrollo de UPP en el enfermo crítico fueron la edad, la estancia media y el tipo de superficie de apoyo, siendo muy significativa la disminución de la incidencia de UPP con las superficies alternantes.Objectives: To assess the risk factors and the types of surface for the development of pressure ulcers (PU on critical ill patients in an Intensive Care Unit (ICU. Material and methods: Prospective study about the incidence of PU. Population: All patients on ICU with EMINA® of high risk, who stay 48 h. at least and don't have PU in the moment of admission. Information about demographic characteristics, gravity in the moment of admitting was recorded: SAPS II and APACHE III, diabetes, sepsis, mechanical ventilation, incidence and graduation of PU, and the type of support surface: alternate (AS or static (SS. Conclusions: The risk factors associated with the development of PU on critical ill patients were the age, the average time in ICU and the type of support surface, being the reduction on incidence of PU with the alternate surfaces very important.

  11. Computations in the deep vs superficial layers of the cerebral cortex.

    Science.gov (United States)

    Rolls, Edmund T; Mills, W Patrick C

    2017-11-01

    A fundamental question is how the cerebral neocortex operates functionally, computationally. The cerebral neocortex with its superficial and deep layers and highly developed recurrent collateral systems that provide a basis for memory-related processing might perform somewhat different computations in the superficial and deep layers. Here we take into account the quantitative connectivity within and between laminae. Using integrate-and-fire neuronal network simulations that incorporate this connectivity, we first show that attractor networks implemented in the deep layers that are activated by the superficial layers could be partly independent in that the deep layers might have a different time course, which might because of adaptation be more transient and useful for outputs from the neocortex. In contrast the superficial layers could implement more prolonged firing, useful for slow learning and for short-term memory. Second, we show that a different type of computation could in principle be performed in the superficial and deep layers, by showing that the superficial layers could operate as a discrete attractor network useful for categorisation and feeding information forward up a cortical hierarchy, whereas the deep layers could operate as a continuous attractor network useful for providing a spatially and temporally smooth output to output systems in the brain. A key advance is that we draw attention to the functions of the recurrent collateral connections between cortical pyramidal cells, often omitted in canonical models of the neocortex, and address principles of operation of the neocortex by which the superficial and deep layers might be specialized for different types of attractor-related memory functions implemented by the recurrent collaterals. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. Análisis de los resultados obtenidos durante la práctica clínica habitual en la reversión del bloqueo neuromuscular superficial con sugammadex : valoración de su impacto farmacoeconómico

    OpenAIRE

    Ripoll Coronado, Laura Isabel

    2014-01-01

    Introducción: Sugammadex revierte de manera rápida y eficaz el bloqueo neuromuscular (BNM) inducido por rocuronio y vecuronio. Sin embargo, la dosis requerida para la reversión del BNM superficial es aún desconocida, y se utiliza la misma dosis que para revertir el BNM moderado. Se investigó si dosis menores de sugammadex en la reversión del BNM superficial obtienen resultados no inferiores a la dosis empleada habitualmente y si sugammadex a estas dosis es superior a la neostigmina. Se valora...

  13. Análisis de los resultados obtenidos durante la práctica clínica habitual en la reversión del bloqueo neuromuscular superficial con sugammadex : valoración de su impacto farmacoeconómico

    OpenAIRE

    Ripoll Coronado, Laura Isabel

    2014-01-01

    Sugammadex revierte de manera rápida y eficaz el bloqueo neuromuscular (BNM) inducido por rocuronio y vecuronio. Sin embargo, la dosis requerida para la reversión del BNM superficial es aún desconocida, y se utiliza la misma dosis que para revertir el BNM moderado. Se investigó si dosis menores de sugammadex en la reversión del BNM superficial obtienen resultados no inferiores a la dosis empleada habitualmente y si sugammadex a estas dosis es superior a la neostigmina. Se valora el impacto fa...

  14. Long-term evolution of superficial optic disc drusen

    DEFF Research Database (Denmark)

    Larsen, Lasse Malmqvist; Lund-Andersen, Henrik; Hamann, Steffen

    2017-01-01

    with hereditary ODD were included. Results: Mean age at initial and follow-up examination was, respectively, 16.8 and 73.3 years. The median follow-up time was 56 years. A minimal or non-existing change in superficial ODD anatomy (size and number) was seen in 10 of 12 eyes. There was a tendency towards more......Purpose: Optic disc drusen (ODD) is hyaline deposits in the optic nerve head seen in 1-2% of the population. Long-term evolution of ODD anatomy and visual field defects in ODD patients is a key factor for learning more about pathophysiology and prognosis of the condition. With a median follow......-up period of 56 years, this is the first study that evaluates superficial optic disc anatomy and visual fields in patients with ODD over a life span. Methods: Observational case series investigating progression of superficial optic disc anatomy and visual fields in ODD patients. Eight patients...

  15. Tensão superficial estática de misturas em tanque de glyphosate + chlorimuron-ethyl isoladas ou associadas com adjuvantes Static superficial tension of glyphosate and chlorimuron-ethyl tank mixtures with or without adjuvants

    Directory of Open Access Journals (Sweden)

    C.D.G. Maciel

    2010-01-01

    Full Text Available Objetivou-se neste estudo avaliar a tensão superficial estática, o pH e a produção da espuma de misturas em tanque de glyphosate + chlorimuron-ethyl, associadas ou não com adjuvantes. Dois trabalhos foram realizados, sendo a primeira etapa desenvolvida em delineamento inteiramente casualizado com seis tratamentos e 20 repetições, representados por soluções dos herbicidas glyphosate (540,0 g e.a. ha-1 e chlorimuron-ethyl (7,5 g ha-1, isolados e em mistura em tanque nas formulações: Polaris®; Roundup Ready®; Classic®; Polaris® + Classic®; Roundup Ready® + Classic® e testemunha (água. Na segunda etapa foram estudados em DIC 70 tratamentos e 20 repetições, em fatorial 2 x 5 x 7, constituído por duas misturas de glyphosate com chlorimuron-ethyl (Polaris® + Classic® e Roundup Ready ® + Classic®, cinco adjuvantes (Joint Oil®; Nimbus®; Assist®; Natur' Oil® e Agr' Óleo® e sete doses dos adjuvantes (0,000; 0,031; 0,062; 0,125; 0,250; 0,500 e 1,000% de v/v. As soluções de Polaris® e Roundup Ready®; isoladas ou em misturas com Classic®; caracterizaram-se por tensões superficiais estáticas de 43,2 e 35,9 mN m-1 e pH médios em torno de 4,5 a 4,6, respectivamente. As misturas de Polaris®+Classic®; Roundup Ready®+Classic® e Classic® apresentaram a maior quantidade e persistência da espuma ao longo do tempo, quando comparadas às formulações de Polaris® e Roundup Ready®. Os adjuvantes promoveram redução da tensão superficial quando associados às misturas de Polaris® + Classic® e Roundup Ready® + Classic®; caracterizando-se em termos de eficiência pela ordem decrescente: Nimbus® (36,5% e 25,8% This work aimed to evaluate static superficial tension, pH and foam production in glyphosate + chlorimuron-ethyl tank mixtures with or without adjuvants. The experiment consisted of two stages, with the first stage being arranged in a complete randomized design, with six treatments and 20 replications, represented

  16. What factors control superficial lava dome explosivity?

    Science.gov (United States)

    Boudon, Georges; Balcone-Boissard, Hélène; Villemant, Benoît; Morgan, Daniel J

    2015-09-30

    Dome-forming eruption is a frequent eruptive style and a major hazard on numerous volcanoes worldwide. Lava domes are built by slow extrusion of degassed, viscous magma and may be destroyed by gravitational collapse or explosion. The triggering of lava dome explosions is poorly understood: here we propose a new model of superficial lava-dome explosivity based upon a textural and geochemical study (vesicularity, microcrystallinity, cristobalite distribution, residual water contents, crystal transit times) of clasts produced by key eruptions. Superficial explosion of a growing lava dome may be promoted through porosity reduction caused by both vesicle flattening due to gas escape and syn-eruptive cristobalite precipitation. Both processes generate an impermeable and rigid carapace allowing overpressurisation of the inner parts of the lava dome by the rapid input of vesiculated magma batches. The relative thickness of the cristobalite-rich carapace is an inverse function of the external lava dome surface area. Explosive activity is thus more likely to occur at the onset of lava dome extrusion, in agreement with observations, as the likelihood of superficial lava dome explosions depends inversely on lava dome volume. This new result is of interest for the whole volcanological community and for risk management.

  17. SUPERFICIAL CERVICAL PLEXUS BLOCK

    Directory of Open Access Journals (Sweden)

    Komang Mega Puspadisari

    2014-01-01

    Full Text Available Superficial cervical plexus block is one of the regional anesthesia in  neck were limited to thesuperficial fascia. Anesthesia is used to relieve pain caused either during or after the surgery iscompleted. This technique can be done by landmark or with ultrasound guiding. The midpointof posterior border of the Sternocleidomastoid was identified and the prosedure done on thatplace or on the level of cartilage cricoid.

  18. Metodologia para obtenção do hidrograma de escoamento superficial em encostas e canais. Parte I: desenvolvimento e avaliação Methodology for obtention of superficial flow hydrograph in hillsides and canals. Part I: development and evaluation

    OpenAIRE

    José M. A. Silva; Fernando F. Pruski; Demetrius D. Silva; Roberto A. Cecílio

    2006-01-01

    Desenvolveu-se uma metodologia que permite obter o hidrograma de escoamento superficial e a vazão máxima para qualquer posição ao longo de uma encosta e para seções transversais de canais utilizando o modelo de ondas cinemáticas. A área da encosta é dividida num sistema matricial composto por 100 linhas e 100 colunas. Na encosta, considera-se que o escoamento ocorre na direção da declividade e que a vazão de cada pixel é a soma da vazão produzida nesse com a vazão advinda dos pixels que contr...

  19. Relación entre las capturas de Megapitaria squalida (Bivalvia: Veneridae y la temperatura superficial del mar en la Bahía de la Paz, Baja California Sur, México

    Directory of Open Access Journals (Sweden)

    Mariana Vázquez Hurtado

    2011-03-01

    Full Text Available La almeja chocolate Megapitaria squalida es un recurso pesquero con creciente importancia en el noroeste de México al registrarse un incremento en los volúmenes de captura. Sin embargo, esta pesquería ha observado variaciones importantes en las capturas que podrían estar relacionadas con factores ambientales. Se obtuvieron datos mensuales de producción de M. squalida durante 2002- 2005 y se estimaron series de tiempo de temperatura superficial del mar en la Bahía de La Paz B.C.S. a partir de imágenes mensuales derivadas del sensor MODIS-Aqua. Los resultados indican una relación positiva significativa entre la temperatura superficial del mar y los volúmenes de captura, razón por la cual nuestro trabajo tiene como objetivo estudiar las relaciones entre capturas de Megapitaria squalida (Bivalvia: Veneridae y la temperatura superficial del mar en La Bahía de la Paz, Baja California Sur, México.

  20. RESISTIVIDAD INDUCIDA POR SCATTERING ELECTRON-SUPERFICIE RUGOSA Y SCATTERING ELECTRON BORDE DE GRANO EN PELICULAS DELGADAS DE ORO DEPOSITADAS SOBRE MICA

    OpenAIRE

    HENRIQUEZ CORREA; RICARDO ANDRES; HENRIQUEZ CORREA; RICARDO ANDRES

    2010-01-01

    En este trabajo se presenta un método experimental que permite separar el efecto de las colisiones electrón-borde de grano y electrón-superficie sobre la resistividad eléctrica en películas delgadas de oro evaporadas sobre mica. Cuando el efecto de las colisiones electrón-borde de grano es dominante, la resistividad no depende del espesor de la muestra, el camino libre medio a 4 K es el diámetro medio de grano, la dependencia de la resistividad con temperatura puede ser descrit...

  1. Rugosidade superficial do solo formada por escarificação e influenciada pela erosividade da chuva Soil surface roughness formed by chiseling and affected by rainfall erosivity

    Directory of Open Access Journals (Sweden)

    Wilson Antonio Zoldan Junior

    2008-02-01

    Full Text Available A rugosidade superficial do solo é influenciada, entre outros fatores, pelo efeito residual de manejo do solo, pelo tipo de preparo e pela erosividade da chuva e, juntamente com a cobertura do solo por resíduos vegetais, influencia a erosão hídrica. O objetivo deste trabalho foi determinar, entre junho de 2005 e março de 2006, em um Nitossolo Háplico alumínico típico, o efeito de uma operação de escarificador e da erosividade de chuvas sobre a rugosidade superficial, nos seguintes sistemas de manejo do solo: preparo convencional sem cultivo do solo (SCE, preparo convencional com cultivo do solo (PCE, semeadura direta em solo nunca preparado e com resíduos queimados (SQE e semeadura direta tradicional (STE. Nos tratamentos PCE, SQE e STE, cultivaram-se aveia-preta, soja, ervilhaca comum, milho, aveia-preta, feijão preto, nabo forrageiro, soja, ervilhaca comum, milho e aveia-preta. Aplicaram-se cinco testes de chuva simulada, com 64 mm h-1 e duração de 20, 30, 40, 50 e 60 min cada um. Entre o segundo e o terceiro teste de chuva simulada ocorreram 57 mm de chuva natural; entre o terceiro e o quarto, 21 mm; e entre o quarto e o quinto, 30 mm. Determinou-se a rugosidade superficial imediatamente antes e logo após o preparo do solo com escarificador e imediatamente após cada teste de chuva simulada. A rugosidade original e linear da superfície do solo não foi influenciada pelo manejo, enquanto a rugosidade ao acaso teve essa influência, ao final de um pousio de seis meses. Diferentes sistemas de manejo do solo mantidos em pousio por seis meses resultaram em diferente rugosidade original, linear e ao acaso, quando o solo foi submetido à operação de escarificador. A rugosidade ao acaso foi menos influenciada pela declividade do terreno do que pelas marcas de preparo do solo, tendo diminuído com o aumento da erosividade das chuvas. Essa mesma rugosidade apresentou coeficiente de decaimento temporal semelhante nos sistemas de manejo

  2. Influencia del acabado superficial en la permeación de hidrógeno del acero API 5L-X52

    Directory of Open Access Journals (Sweden)

    Réquiz, R.

    2004-02-01

    Full Text Available The influence of surface roughness on the corrosion and hydrogen permeation behaviour was evaluated on a type API 5L-X52 steel in deaerated 0.1 M Na2SO4 at pH=2. Potentiodynamic polarization curves were employed to determine the electrochemical behaviour of the steel, while the Devanathan-Stachurski technique was used to estimate the hydrogen permeation rate. Additionally, the surface roughness profiles were obtained in order to correlate the changes in the hydrogen permeation rate with different metal surface finishings. The obtained results clearly demonstrate that when the roughness parameters have larger values, the cathodic current of hydrogen evolution increases while the hydrogen entry rate decreases. This effect can be attributed to the microstructural defects induced at the steel surface, such as dislocations, which increase the catalytic activity of the atomic hydrogen favouring its recombination. Also, these defects could allow the atomic hydrogen to remain adsorbed on the steel surface. Both effects could hinder the hydrogen diffusion into the metal since the possibility for this atom of becoming absorbed has been reduced

    En el presente trabajo de investigación se evalúa la influencia del acabado superficial, tanto en la corrosión generalizada como en la permeación de hidrógeno del acero API 5L-X52 en solución de Na2SO4 0,1M, a pH=2. El comportamiento electroquímico del acero se estudió mediante las curvas de polarización potenciodinámicas, mientras que la susceptibilidad al daño por hidrógeno se evaluó mediante la técnica de permeación de Devanathan- Stachurski. Además, se determinaron los parámetros de rugosidad a las muestras de acero con diferentes acabados superficiales, para luego correlacionarlos con los cambios en las corrientes de permeación de hidrógeno. Los resultados obtenidos demuestran, claramente, que, cuando la rugosidad superficial del acero

  3. Superficie

    OpenAIRE

    Corna, Pablo María

    2015-01-01

    En la época posclásica del derecho romano se buscó, por parte del Estado y ciudadanos, utilizar ciertos terrenos que formaban parte de su patrimonio para arrendarlos por largo término —y a veces a perpetuidad— a personas que tenían el derecho de edificar o plantar mediante el pago de un precio llamado pensio o solárium. En el siglo II de nuestra era ya era utilizado para asentar tribus romanizadas en la frontera del imperio como para el cultivo de vid y los olivos que demoran varios años e...

  4. Metodologia para obtenção do hidrograma de escoamento superficial em encostas e canais. Parte II: modelo computacional e análise de sensibilidade Methodology for obtention of superficial flow hydrograph in hillsides and canals. Part II: computer model and sensitivity analysis

    Directory of Open Access Journals (Sweden)

    José M. A. Silva

    2006-12-01

    Full Text Available Estimativas de vazão máxima de escoamento superficial são necessárias para o projeto de obras hidráulicas em bacias urbanas e rurais. A dificuldade em aplicar os procedimentos disponíveis para calcular a variação do escoamento superficial com o tempo e de seu valor máximo deve-se à inexatidão dos métodos usados para esse objetivo e à variabilidade nos resultados que podem ser obtidos por profissionais que usem o mesmo procedimento. Dessa forma, a investigação de um método que produza estimativas confiáveis da vazão máxima e do hidrograma de escoamento superficial é de grande interesse. Neste trabalho, desenvolveu-se e avaliou-se a sensibilidade de um software (HIDROGRAMA 2.1 que permite a obtenção do hidrograma de escoamento superficial, da vazão máxima e seu tempo de ocorrência, da altura e da velocidade máximas do escoamento, do volume e da lâmina de escoamento superficial em encosta e em canais. O modelo apresentou grande sensibilidade ao período de retorno, à taxa de infiltração estável e ao comprimento da encosta e do canal.Estimative of maximum runoff flow rates are essential for the projects of hydraulic urban and rural basins. The difficulty in applying the available procedures to estimate the temporary variation of the flow rate and its maximum value is due to the inaccuracy of some methods that are usually used and to the big variability of results that can be obtained by different professionals that use the same procedures. Therefore, research of a method that produces trustworthy assessment of peak-flow rates and hydrographs is of great interest. This paper describes the development and sensitivity analysis of a software (HIDROGRAMA 2.1 that allows obtaining surface runoff hydrograph, peak flow rate and its time of occurrence, runoff maximum height, runoff velocity and runoff volume. The model presented great sensibility to precipitation return period, infiltration rate after long time of wetting and

  5. Fatores contingenciais que contribuem para a decisão de modificação do sistema de custeio: estudo de caso em uma indústria moageira

    OpenAIRE

    Silva, Márcia Zanievicz da; Scarpin, Jorge Eduardo; Rocha, Welington; Domenico, Daniela Di

    2014-01-01

    Na pesquisa aqui apresentada, objetivou-se investigar, por meio de um estudo de caso único, os fatores contingenciais que estavam presentes e que poderiam ter influenciado a decisão de modificar o sistema de custeio em uma empresa de moagem de trigo. O estudo do caso operacionalizou-se a partir de pesquisa documental e de entrevistas semiestruturadas. Para a interpretação dos dados, empregaram-se técnicas de análise de conteúdo com o uso do software Atlas TI. As evidências coletadas indicam q...

  6. Efeitos da erva-mate (Ilex paraguaiensis) sobre o metabolismo de aminoácidos e de lipídios em ratos Wistar

    OpenAIRE

    Raquel D'Agostini Silva

    2013-01-01

    A erva-mate (Ilex paraguariensis A.St.-Hil.) é uma espécie nativa da América do Sul, muito utilizada no preparo de bebidas estimulantes. As folhas e ramos utilizados no preparo destas bebidas não são consumidos na sua forma in natura ou bruta, ao contrário, eles passam por uma série de processamentos industriais como o sapeco, secagem, moagem e envelhecimento. As condições de processamento podem modificar as características sensoriais assim como podem influenciar diretamente a quantidade fina...

  7. DETERMINATION OF SUPERFICIAL ABSORBED DOSE FROM EXTERNAL EXPOSURE OF WEAKLY PENETRATING RADIATIONS

    Institute of Scientific and Technical Information of China (English)

    陈丽姝

    1994-01-01

    The methods of determining the superficial absorbed dose distributions in a water phantom by means of the experiments and available theories have been reported.The distributions of beta dose were measured by an extrapolation ionization chamber at definite depthes corresponding to some superficial organs and tissues such as the radiosensitive layer of the skin,cornea,sclera,anterior chamber and lens of eyeball.The ratios among superficial absorbed dose D(0.07) and average absorbed doses at the depthes 1,2,3,4,5 and 6mm are also obtained with Cross's methods.They can be used for confining the deterministic effects of some superficial tissues and organs such as the skin and the components of eyeball for weakly penetrating radiations.

  8. Síntesis, caracterización y ensamblaje de nanopartículas de oro protegidas por monocapas moleculares

    OpenAIRE

    Viudez Navarro, Alfonso J.

    2011-01-01

    En la presente Memoria se estudia la síntesis de nanopartículas de oro protegidas por monocapas moleculares y su caracterización mediante diferentes técnicas tanto espectroscópicas, microscópicas como electroquímicas. El estudio se enfoca en la influencia del tamaño de las nanopartículas en las propiedades de la capa protectora y se hace una extensión al caso límite de la superficie en dos dimensiones. Por último se lleva a cabo la construcción de ensamblajes de las nanopartículas sobre sustr...

  9. Superficial Priming in Episodic Recognition

    Science.gov (United States)

    Dopkins, Stephen; Sargent, Jesse; Ngo, Catherine T.

    2010-01-01

    We explored the effect of superficial priming in episodic recognition and found it to be different from the effect of semantic priming in episodic recognition. Participants made recognition judgments to pairs of items, with each pair consisting of a prime item and a test item. Correct positive responses to the test item were impeded if the prime…

  10. Fístula arteriovenosa safeno-femoral superficial como acesso à hemodiálise: descrição de técnica operatória e experiência clínica inicial Superficial saphenofemoral arteriovenous fistula as access to hemodialysis: description of operative technique and initial clinical experience

    Directory of Open Access Journals (Sweden)

    João Antônio Corrêa

    2005-01-01

    Full Text Available OBJETIVO: Descrever uma técnica de confecção de fístula arteriovenosa para acesso à hemodiálise, avaliando os aspectos técnicos de sua confecção, eficácia e complicações. MÉTODO: Foram realizadas 16 fístulas arteriovenosas safeno-femoral superficial em 15 pacientes, no período de agosto de 1998 a outubro de 2000. Esses procedimentos foram efetuados em pacientes sem opções de acesso em membros superiores. A técnica utilizada foi a anteriorização e superficialização da veia safena magna, anastomosando-a na artéria femoral superficial distal. As fístulas arteriovenosas safeno-femoral superficial foram avaliadas quanto à facilidade de punção, fluxo adequado, pressão venosa espontânea, adequação de diálise e complicações no intra-operatório. RESULTADOS: Todas as fístulas puderam ser concluídas com sucesso, sem complicações no intra-operatório. Houve um óbito precoce, porém as demais estavam aptas às punções no 30º dia pós-operatório. Quatorze fístulas foram utilizadas e, na evolução, três pacientes foram submetidos a transplante renal, quatro apresentaram trombose, dois apresentaram pseudoaneurisma de punção. CONCLUSÃO: As fístulas arteriovenosas safeno-femoral superficial mostram-se como boa alternativa para pacientes que não possuem outras possibilidades de acesso em membros superiores, permitindo tratamento hemodialítico eficaz, com boa taxa de perviedade em médio prazo.OBJECTIVE: To describe a technique for creating an arteriovenous fistula as an access to hemodialysis, evaluating its technical aspects, efficacy and complications. METHOD: From August 1998 to October 2000, 16 superficial saphenofemoral arteriovenous fistulas were performed in 15 patients. These procedures were used in patients without access options in upper limbs. The surgical technique consisted of an anteriorization and a superficialization of the saphenous vein anastomosed to the superficial femoral artery in the

  11. Pigmented basal cell carcinoma mimicking a superficial spreading melanoma

    Directory of Open Access Journals (Sweden)

    Paula Hasbún Acuña

    2016-12-01

    Full Text Available Resumen El carcinoma basocelular es el cáncer de piel más frecuente, especialmente en personas de edad avanzada. El carcinoma basocelular pigmentado es una variante poco común que se ha descrito en la literatura como una lesión nodular hiperpigmentada. En raras ocasiones puede presentarse en forma de una extensa placa pigmentada, la cual puede ser clínicamente indistinguible del melanoma maligno de extensión superficial y de la enfermedad de Bowen. La dermatoscopía tiene una alta sensibilidad en el diagnóstico del carcinoma basocelular, cuando se utilizan los criterios de Menzies, aunque el diagnóstico final es histopatológico. El objetivo del presente trabajo es reportar y analizar el caso de una paciente con un extenso carcinoma basocelular superficial pigmentado, que simula un melanoma maligno de extensión superficial.

  12. Superficial x-ray in-vivo dosimetry with MOSFET detectors

    International Nuclear Information System (INIS)

    Cheung, T.; Yu, P.K.N.; Butson, M.J.; Cancer Services, Wollongong, NSW

    2004-01-01

    Full text: This note investigates in-vivo dosimetry using a Metal Oxide Semiconductor Field Effect Transistor (MOSFET) for radiotherapy treatment at superficial and orthovoltage x-ray energies. This was performed within one fraction of the patient's treatment. Standard measurements along with energy response of the detector are given. Results showed that the MOSFET measurements in-vivo agreed with calculated results on average within ± 5.6% over all superficial and orthovoltage energies. These variations were slightly larger than TLD results with variations between measured and calculated results being ± 5.0% for the same patient measurements. The MOSFET device provides adequate in-vivo dosimetry for superficial and orthovoltage energy treatments with the accuracy of the measurements seeming to be relatively on par with TLD in our case. The MOSFET does have the advantage of returning a relatively immediate dosimetric result after irradiation. Copyright (2004) Australasian College of Physical Scientists and Engineers in Medicine

  13. Uso de sistemas bioactivos en la formación de apatita en la superficie de aleaciones base cobalto

    Directory of Open Access Journals (Sweden)

    Cortés, D. A.

    2004-10-01

    Full Text Available To promote a bioactive surface on cobalt base alloys a biomimetic method was used. The metallic substrates were alkali- and heat-treated. The treated substrates were immersed in simulated body fluid for 21 days in presence of wollastonite ceramics or bioactive glass. Two different simulated body fluids were used, one with an ion concentration close to human blood plasma (SBF and other with a concentration of 1.5 times of that of the SBF (1.5SBF. Some tests were performed by soaking the samples for 7 days in SBF with bioactive material, followed by an immersion in 1.5SBF (re-immersion method. Tests with no bioactive material were also performed in all the cases. A bonelike apatite layer was formed on the substrates treated with wollastonite and bioactive glass. The morphology more similar to that of the existing bioactive systems was obtained by using the re-immersion method with wollastonite. No apatite layer was formed on the substrates treated with no bioactive material, apart from the cases when the re-immersion method was used.

    Se utilizó un método biomimético con el fin de bioactivar la superficie de dos aleaciones base cobalto. Después de tratarse química y térmicamente, los sustratos se colocaron sobre wollastonita o biovidrio dentro de una solución fisiológica por 21 días. Se utilizaron dos soluciones, una con una concentración cercana a la del plasma sanguíneo humano (SBF y otra con una concentración 1.5 veces la de la anterior (1.5SBF. Además de sumergir los sustratos por 21 días en SBF o 1.5SBF, se trataron algunas muestras por 7 días en SBF con material bioactivo + 14 días en 1.5SBF (método de re-inmersión. Se realizaron también pruebas sin la presencia de material bioactivo. Se formó una capa de apatita de características similares a las de la fase mineral del hueso en la superficie de las muestras tratadas con wollastonita y biovidrio en todos los casos. Las capas cerámicas de morfología más similar a

  14. Clinicomycological Characterization of Superficial Mycoses from a Tertiary Care Hospital in Nepal.

    Science.gov (United States)

    Khadka, Sundar; Sherchand, Jeevan Bahadur; Pokharel, Dinesh Binod; Pokhrel, Bharat Mani; Mishra, Shyam Kumar; Dhital, Subhash; Rijal, Basista

    2016-01-01

    Background . Superficial mycosis is a common fungal infection worldwide, mainly caused by dermatophytes. However, the prevalence of species varies geographically. In addition, fungal treatment is best guided according to species isolated. This study was carried out to determine the clinical as well as mycological profile of superficial mycoses in a tertiary care hospital, Nepal. Methods . This was a prospective case-control laboratory based study conducted over a period of six months from January to June 2014 at Tribhuvan University Teaching Hospital, Nepal. A total of 200 specimens were collected from the patients suspected of superficial mycoses. The specimens were macroscopically as well as microscopically examined. The growth was observed up to 4 weeks. Results. Out of total 200 specimens from the patients suspected of superficial mycoses, tinea corporis 50 (25%) was most common clinical types. KOH mount was positive in 89 (44.5%) and culture was positive in 111 (55.5%). Trichophyton mentagrophytes 44 (39.6%) was the most common isolate. Conclusions. The diagnostic yields of KOH mount and culture were found to be complementary to each other. Thus both the methods added with clinical findings are equally important to establish superficial mycosis.

  15. Clinicomycological Characterization of Superficial Mycoses from a Tertiary Care Hospital in Nepal

    Directory of Open Access Journals (Sweden)

    Sundar Khadka

    2016-01-01

    Full Text Available Background. Superficial mycosis is a common fungal infection worldwide, mainly caused by dermatophytes. However, the prevalence of species varies geographically. In addition, fungal treatment is best guided according to species isolated. This study was carried out to determine the clinical as well as mycological profile of superficial mycoses in a tertiary care hospital, Nepal. Methods. This was a prospective case-control laboratory based study conducted over a period of six months from January to June 2014 at Tribhuvan University Teaching Hospital, Nepal. A total of 200 specimens were collected from the patients suspected of superficial mycoses. The specimens were macroscopically as well as microscopically examined. The growth was observed up to 4 weeks. Results. Out of total 200 specimens from the patients suspected of superficial mycoses, tinea corporis 50 (25% was most common clinical types. KOH mount was positive in 89 (44.5% and culture was positive in 111 (55.5%. Trichophyton mentagrophytes 44 (39.6% was the most common isolate. Conclusions. The diagnostic yields of KOH mount and culture were found to be complementary to each other. Thus both the methods added with clinical findings are equally important to establish superficial mycosis.

  16. Evaluación del comportamiento de sistemas de ventilación por captación lateral sobre baños de tratamiento de superficies: Condicionantes del proyecto de instalaciones

    Directory of Open Access Journals (Sweden)

    González, Enrique

    1999-12-01

    Full Text Available In the design of local exhaust ventilation systems for open surface tanks, the element of control that permits the total shutting in the source is clearly the best, being this procedure the starting point for industrial projector for the preliminary design installation. However, the frequent need of introducing and extracting the workpieces by their upper side through mobile crane or other load devices, the reinstatement components of the tank and the surveillance on the part operators, makes necessary that the access in such zone side be easy, being disabled the total encirclement. Consequently those components that prevent carry out the cited operations should be eliminated, appealing to the installation of local exhaust ventilation. Other inconvenients of these systems, derivated from the character omnidirectional of the aspiration, make necessary to operate with high exhaust flows to generate suitable speeds of control in the baths, therefore it is not advisable their installation for lengths higher than 1.20m. On the other hand the complexity of the mechanism of the involved air flows advises the experimental devices employment that permit the visualization of the different current of involved air, being furthermore necessary to use tracer gases to evaluate quantitatively the capture efficiency of the system. In this work are outlined, in function of the investigations carried out, the basis of the design of ventilation equipments to real scale that permit to study in-depth the influence of the variables that condition the capture efficiency.

    En la ventilación por extracción localizada aplicada a baños de tratamiento de superficies, el mejor elemento de control es aquel que permite el encerramiento total de la fuente emisora, siendo este procedimiento el punto de partida del proyectista para el diseño preliminar de la instalación. Ahora bien, la frecuente necesidad de introducir y extraer las piezas a tratar por su zona superior

  17. Ultrasound of musculoskeletal soft-tissue tumors superficial to the investing fascia.

    Science.gov (United States)

    Hung, Esther Hiu Yee; Griffith, James Francis; Ng, Alex Wing Hung; Lee, Ryan Ka Lok; Lau, Domily Ting Yi; Leung, Jason Chi Shun

    2014-06-01

    The objective of our study was to evaluate the diagnostic accuracy of ultrasound in assessing musculoskeletal soft-tissue tumors superficial to the investing fascia. Seven hundred fourteen superficial soft-tissue tumors evaluated with ultrasound by two musculoskeletal radiologists were retrospectively reviewed. In all ultrasound reports, the reporting radiologists provided one, two, or three diagnoses depending on their perceived level of diagnostic certainty. Two hundred forty-seven tumors had subsequent histologic correlation, thus allowing the accuracy of the ultrasound diagnosis to be determined. Images of the lesions with a discordant ultrasound diagnosis and histologic diagnosis were reviewed, and the ultrasound features were further classified as concordant with the known histologic diagnosis, concordant with the known histologic diagnosis with atypical features present, or discordant with the known histologic diagnosis. Four hundred sixty-seven tumors without pathologic confirmation were followed up clinically. Overall the accuracy of ultrasound examination for assessing superficial soft-tissue masses was 79.0% when all differential diagnoses were considered and 77.0% when only the first differential diagnosis was considered. The sensitivity and specificity of the first ultrasound diagnosis were 95.2% and 94.3%, respectively, for lipoma; 73.0% and 97.7% for vascular malformation; 80.0% and 95.4% for epidermoid cyst; and 68.8% and 95.2% for nerve sheath tumor. Reduced observer awareness of specific tumor entities tended to contribute to underdiagnosis more than poor specificity of ultrasound findings. Most tumors (236/247, 96%) were benign. The sensitivity and specificity of ultrasound for identifying malignant superficial soft-tissue tumors was 94.1% and 99.7%, respectively. The diagnostic accuracy of ultrasound in the assessment of superficial musculoskeletal soft-tissue tumors is high and can be improved through increased radiologist awareness of less

  18. Volumetric Modulated Arc Therapy (VMAT) Treatment Planning for Superficial Tumors

    International Nuclear Information System (INIS)

    Zacarias, Albert S.; Brown, Mellonie F.; Mills, Michael D.

    2010-01-01

    The physician's planning objective is often a uniform dose distribution throughout the planning target volume (PTV), including superficial PTVs on or near the surface of a patient's body. Varian's Eclipse treatment planning system uses a progressive resolution optimizer (PRO), version 8.2.23, for RapidArc dynamic multileaf collimator volumetric modulated arc therapy planning. Because the PRO is a fast optimizer, optimization convergence errors (OCEs) produce dose nonuniformity in the superficial area of the PTV. We present a postsurgical cranial case demonstrating the recursive method our clinic uses to produce RapidArc treatment plans. The initial RapidArc treatment plan generated using one 360 o arc resulted in substantial dose nonuniformity in the superficial section of the PTV. We demonstrate the use of multiple arcs to produce improved dose uniformity in this region. We also compare the results of this superficial dose compensation method to the results of a recursive method of dose correction that we developed in-house to correct optimization convergence errors in static intensity-modulated radiation therapy treatment plans. The results show that up to 4 arcs may be necessary to provide uniform dose to the surface of the PTV with the current version of the PRO.

  19. Superficial siderosis of the central nervous system - A case report

    International Nuclear Information System (INIS)

    Mannalini, S.

    1997-01-01

    There is little information on superficial siderosis of the central nervous system (CNS) in the literature, mainly due to the rarity of the disease, the difficulties in diagnosis (autopsy pre magnetic resonance imaging (MRI)) and the long latency of the symptoms. With the advent of MRI, for the first time we are able to make a positive in vivo diagnosis. But this comes at a time of less disease incidence, and little clinical awareness. MRI is able to make the diagnosis because of the strong paramagnetic effect of haemosiderin, the blood by-product that is deposited on the brain surface in superficial siderosis of the CNS. The ability of the brain to biosynthesize ferritin in response to prolonged contact with haemosiderin is thought to be the most important factor in the pathogenesis of superficial siderosis. (author)

  20. Volumetric and superficial characterization of carbon activated; Caracterizacion volumetrica y superficial de carbon activado

    Energy Technology Data Exchange (ETDEWEB)

    Carrera G, L.M.; Garcia S, I.; Jimenez B, J.; Solache R, M.; Lopez M, B.; Bulbulian G, S.; Olguin G, M.T. [Departamento de Quimica, Gerencia de Ciencias Basicas, Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2000-07-01

    The activated carbon is the resultant material of the calcination process of natural carbonated materials as coconut shells or olive little bones. It is an excellent adsorbent of diluted substances, so much in colloidal form, as in particles form. Those substances are attracted and retained by the carbon surface. In this work is make the volumetric and superficial characterization of activated carbon treated thermically (300 Centigrade) in function of the grain size average. (Author)

  1. Clinicopahological features of superficial basaloid squamous cell carcinoma of the esophagus.

    Science.gov (United States)

    Oguma, J; Ozawa, S; Kazuno, A; Nitta, M; Ninomiya, Y; Tomita, S

    2017-12-01

    Basaloid squamous cell carcinoma (BSC) of the esophagus is classified as an epithelial malignant tumor and is a rare variant of squamous cell carcinoma (SCC). Most previous reports have suggested that advanced BSC has a poorer prognosis than typical SCC because of its high biological malignancy, but the biological activity of superficial BSC remains unclear. Twenty cases of superficial BSC, which underwent surgical resection in Tokai University Hospital between January 2004 and December 2013, were analyzed retrospectively. Among these cases, 19 cases with a T1 depth of invasion (BSC group) were compared with 180 cases of SCC that were resected during the same period and were pathologically diagnosed as T1 (SCC group). The frequency of lymph node metastasis in the T1 BSC group was significantly lower (2 patients, 11%) than that in the SCC group (84 patients, 47%) (P = 0.005). The frequency of lymphatic invasion in the BSC group was also lower (9 patients, 47%) than that in the SCC group (131 patients, 73%) (P = 0.021). The pathological type of the metastatic lymph node was BSC in all the superficial BSC cases with lymph node metastasis. This study demonstrated that lymph node metastasis was less likely to occur in cases with superficial BSC than in cases with superficial SCC. © The Authors 2017. Published by Oxford University Press on behalf of International Society for Diseases of the Esophagus. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  2. Factores para el escalado del proceso de producción de celulosa por fermentación estática

    OpenAIRE

    Caicedo, Luis Alfonso; Da França, F. P.; Lopez, L.

    2011-01-01

    En la producción de celulosa bacteriana por el método estático, el factor de rendimiento Yp/s es afectado por la concentración de glucosa inicial y el tiempo de fermentación. Bajas concentraciones dan valores altos de Yp/s al inicio de la fermentación, mientras que altas concentraciones requieren tiempos largos para lograr valores comparables. El área superficial aumenta la producción de celulosa, pero existe una relación (área interfacial/volumen de medio) límite a partir de la cual la celul...

  3. Tensiones residuales generadas en acero F-522 por distintos tipos de mecanizado

    Directory of Open Access Journals (Sweden)

    García-Navas, V.

    2005-08-01

    Full Text Available Machining operations induce plastic deformation and heat generation in the near surface area of the machined part, giving rise to residual stresses. Depending on their magnitude and sign, these stresses can be detrimental or beneficial to the service life of the part. The final stress state depends on the machining process applied, as well as on the machining parameters. Therefore, the establishment of adequate machining guidelines requires the measurement of the residual stresses generated both at the surface and inside the material. In this work, the residual stresses generated in F-522 steel by two hard turning (conventional and laser assisted and two grinding (production and finishing processes were measured by X-ray diffraction. Additionally, depth profiles of the volume fraction of retained austenite, microstructure and nanohardness were obtained in order to correlate those results with the residual stress state obtained for each machining process. It has been observed that turning generates tensile stresses in the surface while grinding causes compressive stresses. Below the surface grinding generates weak tensile or nearly null stresses whereas turning generates strong compressive stresses. These results show that the optimum machining process (disregarding economical considerations implies the combination of turning plus elimination of a small thickness by final grinding.

    Las operaciones de mecanizado generan deformación plástica y calor en la zona próxima a la superficie de la pieza mecanizada, dando lugar a tensiones residuales. Dependiendo de su magnitud y signo, estas tensiones pueden ser perjudiciales o beneficiosas para la vida en servicio de la pieza. El estado final de tensiones depende del proceso de mecanizado aplicado, así como de los parámetros del mismo. Por tanto, el establecimiento de unas pautas de mecanizado adecuadas requiere una medida precisa de las tensiones residuales generadas, tanto en la superficie

  4. Evaluación del comportamiento mecánico y superficial de materiales metálicos sometidos a tratamientos de compresión mediante ondas de choque generadas por láser

    OpenAIRE

    Gutiérrez González, Javier

    2016-01-01

    El presente trabajo de fin de grado se ha desarrollado en el Centro Láser de la Universidad Politécnica de Madrid y ha consistido en la caracterización mecánica y superficial del acero AISI 316L tras haber sido tratado mediante el tratamiento “Laser peening” y el estudio de la estabilidad de las tensiones residuales inducidas al ser sometido a un tratamiento a 500ºC durante dos horas. El tratamiento LSP es un tratamiento mecánico superficial que consiste en la creación de ondas de choque ...

  5. Biomass torrefaction characteristics in inert and oxidative atmospheres at various superficial velocities.

    Science.gov (United States)

    Chen, Wei-Hsin; Lu, Ke-Miao; Liu, Shih-Hsien; Tsai, Chi-Ming; Lee, Wen-Jhy; Lin, Ta-Chang

    2013-10-01

    The reaction characteristics of four biomass materials (i.e. oil palm fiber, coconut fiber, eucalyptus, and Cryptomeria japonica) with non-oxidative and oxidative torrefaction at various superficial velocities are investigated where nitrogen and air are used as carrier gases. Three torrefaction temperatures of 250, 300, and 350 °C are considered. At a given temperature, the solid yield of biomass is not affected by N2 superficial velocity, revealing that the thermal degradation is controlled by heat and mass transfer in biomass. Increasing air superficial velocity decreases the solid yield, especially in oil palm fiber and coconut fiber, implying that the torrefaction reaction of biomass is dominated by surface oxidation. There exists an upper limit of air superficial velocity in the decrement of solid yield, suggesting that beyond this limit the thermal degradation of biomass is no longer governed by surface oxidation, but rather is controlled by internal mass transport. Copyright © 2013 Elsevier Ltd. All rights reserved.

  6. Efecto de la cobertura del suelo y de una enmienda de yeso en la infiltración del agua en riego por aspersión

    OpenAIRE

    Berenguer, María José; Faci González, José María; Martínez-Cob, Antonio

    1994-01-01

    [ES] Este trabajo analizó el efecto del riego por aspersión sobre la infiltración de un suelo de textura franco-limosa en un ensayo de campo realizado en los nuevos regadíos de Monegros II (Huesca). Se establecieron cinco tratamientos: 1) cultivo de sorgo, 2) cultivo de sorgo más yeso, 3) suelo desnudo, 4) suelo desnudo con yeso y 5) suelo desnudo con arena. Los resultados indican que la dispersión de la superficie del suelo por causas físicas fue minimizada por la propia cobertura d...

  7. Aneurysm of the superficial femoral artery in an infant

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, M.; Komuro, H.; Matoba, K.; Kaneko, M. [Dept. of Paediatric Surgery, Inst. of Clinical Medicine, Univ. of Tsukuba, Ibaraki (Japan); Niitsu, M.; Itai, Y. [Dept. of Radiology, Inst. of Clinical Medicine, Univ. of Tsukuba, Ibaraki (Japan)

    2003-04-01

    An isolated arterial aneurysm in childhood is extremely rare. We report a 1-year-old girl with an aneurysm of the right superficial femoral artery, presenting as an asymptomatic mass of the thigh. The aneurysm involved the whole superficial femoral artery (9 cm in length), and surgical treatment would have required replacement of the affected artery. Conservative treatment was chosen, influenced by the patient's rapid growth at that time. Non-invasive, 3-D contrast-enhanced magnetic resonance angiography (MRA) was useful as an alternative to conventional angiography for detailed evaluation of the femoral arteries, including the aneurysm. (orig.)

  8. Two Crosslinking Technologies for Superficial Reticular Dermis Injection: A Comparative Ultrasound and Histologic Study

    OpenAIRE

    Micheels, Patrick; Besse, Stéphanie; Sarazin, Didier

    2017-01-01

    Background: Few hyaluronic acid fillers have been developed for superficial injection. Objective: To compare the diffusion and integration properties of cohesive polydensified matrix and Vycross® technology hyaluronic acid fillers with lidocaine following injection into the superficial reticular dermis. Methods and materials: Two subjects received two injections each of cohesive polydensified matrix and Vycross® hyaluronic acid (0.2mL/site) in the superficial reticular dermis of the buttock u...

  9. ESTUDO DA MICROESTRUTURA DO CONCRETO COM ADIÇÃO DE CINZA DE CASCA DE ARROZ RESIDUAL SEM BENEFICIAMENTO

    OpenAIRE

    Marcelo Adriano Duart

    2008-01-01

    O uso de adições minerais em concretos é um tema bastante estudado por vários pesquisadores que buscam características como: redução do consumo de cimento para redução de custos, aumento da durabilidade, aumento da resistência mecânica e aproveitamento de resíduos industriais para redução da poluição ambiental. Este estudo pretende analisar a microestrutura dos concretos dosados com adição de cinza de casca de arroz residual sem controle de queima e sem moagem (CCAN), em substitui...

  10. El análisis molecular y el inmunogénico sugieren la ausencia de las proteínas hidrofílicas de superficie en Leishmania (Viannia panamensis

    Directory of Open Access Journals (Sweden)

    Marcel Marín

    2008-09-01

    Full Text Available Introducción. Los dos subgéneros en los cuales se divide el género Leishmania: Viannia y Leishmania, presentan diferencias significativas en las manifestaciones clínicas que causan, en su comportamiento de crecimiento en cultivos in vitro, en sus características genéticas y en la expresión de varias proteínas, entre ellas las de la familia hidrofílica de superficie superficie. Objetivo. Caracterizar las proteínas hidrofílicas de superficie en Leishmania (Viannia panamensis. Materiales y métodos. Se amplificaron los genes hasp en L. (V. panamensis usando cebadores específicos para la especie Leishmania (Leishmania major. Los productos de la amplificación fueron clonados, secuenciados y analizados con herramientas bioinformáticas. Posteriormente, se realizó un análisis serológico por medio de ensayo inmunoabsorbente ligado a enzimas y Western blot para detectar la presencia de anticuerpos específicos contra las proteínas hidrofílicas recombinantes de superficie de L. (L. major en sueros de pacientes con leishmaniasis de zonas endémicas de Colombia. Resultados. Se encontró una copia de un pseudogen en L. (V. panamensis, el cual presentó una identidad del 60% con el gen haspa de L. (L. major. Sólo se encontraron anticuerpos contra las proteínas recombinantes de superficie hidrofílicas en sueros de pacientes con leishmaniasis visceral. Conclusión. Estos resultados sugieren que no existe ninguna copia de un gen funcional hasp en L. (V. panamensis, lo que indica una pérdida de la familia de genes en esta especie de Leishmania perteneciente al subgénero Viannia.

  11. Malignant transformation of superficial peritoneal endometriosis lesion.

    Science.gov (United States)

    Marchand, Eva; Hequet, Delphine; Thoury, Anne; Barranger, Emmanuel

    2013-08-26

    A 63-year-old woman with no medical history underwent an abdominal surgery with hysterectomy and bilateral salpingo-oophorectomy for a 10 cm peritoneal cyst with increased cancer antigene-125. A large suspicious tumour of the Douglas space, with contact to the uterus and the rectal wall was described. The rest of the exploration was normal, specially the rest of the peritoneum. Histopathology revealed a malignant transformation of a superficial peritoneal endometriosis. Secondary surgery was thus completed by laparoscopy with bilateral pelvic and para-aortic lymph node dissections, omentectomy and multiple peritoneal biopsies. All staging samples were free of cancer; therefore no complementary therapy was administered. After 18 months of follow-up, consisting of clinical examination and pelvis magnetic resonance imaging every 6 months, we did not observe any recurrence. Malignant transformation of superficial peritoneal endometriosis is a rare disease and surgical management seems to be the main treatment.

  12. Castelli di carta. La piega per la costruzione di superfici articolate

    Directory of Open Access Journals (Sweden)

    Andrea Casale

    2012-06-01

    Full Text Available L’antica arte del piegare la carta, l’Origami, sta vivendo un rinnovato interesse che coinvolge molti aspetti della ricerca.  Con il termine origami, si intende lo studio del modo di piegare il foglio di carta per imporgli una specifica forma.  La superficie tassellata per mezzo di specifiche pieghe, si propone come un nuovo soggetto di studio: la superficie piegata articolata. La forma congiunta al movimento, assume un particolare interesse nella contemporanea ricerca geometrica e architettonica. Il panorama contemporaneo, propone opere di architettura “responsiva”, capaci di modificare le proprie caratteristiche per adeguarsi a nuove condizioni. La superficie piegata articolata sembra particolarmente adatta a descrivere questo modo d’intendere l’architettura, reagendo a diverse volontà e di conseguenza modificando la propria conformazione attraverso un attento controllo progettuale della forma.

  13. Valoración de la superficie del dializador en la hemodiafiltración on-line. Elección objetiva de la superficie del dializador

    Directory of Open Access Journals (Sweden)

    Francisco Maduell

    2015-05-01

    Conclusión: El incremento del 40% y el 80% de la superficie conlleva un aumento del volumen convectivo de un 6 y un 16% respectivamente, aunque se evidenció una reducción en su máximo rendimiento, mostrando mínimas diferencias tanto en el volumen convectivo como en la capacidad depurativa cuando el CUF era superior a 45 ml/h/mmHg. Es recomendable optimizar el rendimiento de los dializadores a la mínima superficie posible adecuando la prescripción de tratamiento.

  14. Superficial fungal infections.

    Science.gov (United States)

    Schwartz, Robert A

    Superficial fungal infections arise from a pathogen that is restricted to the stratum corneum, with little or no tissue reaction. In this Seminar, three types of infection will be covered: tinea versicolor, piedra, and tinea nigra. Tinea versicolor is common worldwide and is caused by Malassezia spp, which are human saprophytes that sometimes switch from yeast to pathogenic mycelial form. Malassezia furfur, Malassezia globosa, and Malassezia sympodialis are most closely linked to tinea versicolor. White and black piedra are both common in tropical regions of the world; white piedra is also endemic in temperate climates. Black piedra is caused by Piedraia hortae; white piedra is due to pathogenic species of the Trichosporon genus. Tinea nigra is also common in tropical areas and has been confused with melanoma.

  15. fluidizado por proceso autotérmico

    Directory of Open Access Journals (Sweden)

    ZULAMITA ZAPATA BENABITHE

    2005-01-01

    Full Text Available El presente trabajo se basa en el estudio de la producción de carbón activado a partir de carbón mineral subbituminoso en un reactor de lecho fluidizado por proceso autotérmico. El carbón utilizado provino de la región de Amagá (Antioquia - Colombia y fue activado en dos reactores de lecho fluidizado de diferente diámetro interno, 10 cm y 22 cm. Los valores del área superficial específica y el volumen de poro de las muestras activadas fueron determinados a partir de las isotermas de N2 y CO2. Los resultados experimentales mostraron que los valores de áreas superficiales BET y DR y del Índice de Yodo se encontraron alrededor de 460 m2/g (SBET, 490 m2/g (SDR y 460 mg I2/g carbón.

  16. Experiments on the superficial irradiation of spherical vegetables and fruits

    International Nuclear Information System (INIS)

    Kalman, B.; Kiraly, Z.

    1974-01-01

    A revolving facility was made for the homogeneous superficial irradiation of spherical vegetables and fruits (apricot, peach, tomato, apple, etc.) with fast electrons. After the building of the technological apparatus described in detail, dosimetrical measurements were carried out by a Van de Graff generator of 2 MV and it was proved, that the superficial irradiation had a smaller effect on the quality of the fresh fruits, than of the stored ones. The developed apparatus can be altered according to the ripe-rate of the products. (K.A.)

  17. Matriz para ingeniería de tejido óseo: modificación superficial con zinc. Estudio preliminar. [Scaffold for bone tissue engineering: superficial modification with zinc. Preliminary study

    Directory of Open Access Journals (Sweden)

    Cristian Martínez

    2013-09-01

    Full Text Available El objetivo del presente trabajo es desarrollar un método de síntesis de matrices para ingeniería de tejidos, capaces de acelerar los procesos reparativos y disminuir el riesgo de infección, destinadas a cirugías reconstructivas que involucren el tejido óseo. A este fin se emplea la fase mineral de hueso bovino, la hidroxiapatita, conservando su estructura tridimensional. Esta se obtiene a partir de un proceso de lavado químico, seguido de un proceso térmico que elimina todos los componentes orgánicos. Esta matriz es modificada superficialmente con óxido de zinc (ZnO, elemento reconocido por su acción en diversos procesos biológicos y su acción antibacteriana. El procedimiento involucra la intrusión de dispersiones de ZnO en solución de alcohol-1,2,3 propanotriol, efectuadas en un baño térmico y el ulterior sinterizado a alta temperatura. El grado de fijación y la concentración del Zn sobre la matriz de hidroxiapatita se determinan por medio de microscopia electrónica y espectrometría en energías. La difracción de rayos X muestra que la incorporación de los iones de Zn en la superficie forma fosfatos de Zn. El original proceso desarrollado permite modificar, en forma sencilla, injertos óseos sintéticos, otorgando capacidad antibacteriana y osteoproliferativa al sustrato osteconductor.

  18. Mecanismos de Defensa del Hospedero en Estomatitis Sub-Protesica Inducida por Candida

    OpenAIRE

    Cardozo de Pardi, Elba Inés

    2002-01-01

    La Estomatitis Sub-Protésica (E.S.P.) es una entidad que se localiza principalmente en la mucosa del paladar que se encuentra por debajo de la superficie de ajuste de las prótesis removibles parciales y totales. Esta patología es más común en mujeres que en hombres y se observa más frecuentemente en sujetos con edades comprendidas entre 25 y 90 años. Diversos estudios han revelado que la E.S.P. está asociada con la detección de especies de Candida y de otros microorganismos, mientras que otro...

  19. Modelo numérico tridimensional para la simulación de procesos de tratamiento superficial de materiales con láser

    Directory of Open Access Journals (Sweden)

    García-Beltrán, A.

    1999-04-01

    Full Text Available A numerical model for the predictive assessment of laser transformation hardening of steels and other surface treatments both in metallic and non-metallic materials has been developed. Starting from material and geometry data, the problem of heat diffusion from the thermal source provided by the laser is solved with complete space and temperature-dependence. The developed 3D simulation model has been successfully checked against theoretical and experimental results both for metallic and non-metallic materials. Typical examples of its application have been the thermal surface hardening of steels and the analysis of thermal fields in low diffusivity materials (as optical glass in laser polishing applications.

    Se desarrolla un modelo numérico para la predicción y análisis del temple superficial de aceros por láser y de otros tratamientos superficiales de materiales metálicos y no metálicos. Partiendo de los datos del material y de su geometría, el modelo tridimensional de simulación desarrollado resuelve el problema de la transferencia de calor de la fuente generada por el haz láser dependiente del tiempo y de la temperatura y ha sido contrastado teórica y experimentalmente tanto para materiales metálicos como no metálicos. Ejemplos típicos de su aplicación son el temple superficial de acero al carbono y el análisis de los campos térmicos en materiales de baja conductividad térmica (como el vidrio óptico en aplicaciones de pulido con láser.

  20. Tensión-Deformación durante la deformación Plástica Superficial con rodillo.

    Directory of Open Access Journals (Sweden)

    I. Rodríguez

    2009-09-01

    Full Text Available Se establece el procedimiento para el endurecimiento del acero 45 a través de la Deformación Plástica por rodadura con el empleo de un torno marca 16 D 20 y un rodillo como elemento deformante. En el trabajo se muestra la forma de sujeción de la pieza entre plato y punto, método empleado para evitar la flexión de la pieza durante el proceso de elaboración, se muestran las variables del diseño de experimento numero de revolución, avance y fuerza, las cuales permiten realizar el procesamiento estadísticos de los datos, lo que luego son graficado para obtener el comportamiento de las curvas de fuerza contra dureza y avance contra dureza y demostrar el incremento de la dureza superficial en la medida que se incrementa el valor de las variables. Se describen los pasos para la preparación metalografica de la probeta desde el corte de la misma con el empleo de cuchilla del tipo SANVIDK, hasta el pulido para la observación metalografica, donde se determina el comportamiento de la red cristalina por el tensionamiento de los granos y el endurecimiento por acritud.The procedure settles down for the hardening of the steel 45 through the Plastic Deformation for rolling with the employment of a lathe 16 D 20 and a roller like element deformante. In the work the form of subjection of the piece is shown between plate and point, method used to avoid the flexion of the piece during the trial of elaboration, the variables of the experiment design are shown I number of revolution, advance and it forces, which allow to carry out the statistical prosecution of the data, that are graph to obtain the behavior of the curves of force against hardness and advance against hardness and to demonstrate the increment of the superficial hardness in the measure that the value of the variables is increased. The steps are described for the preparation metalographyc of the test tube from the cut of the same one with the employment of kitchen knife of the type SANVIDK

  1. Rendimento e composição química de cultivares de milho em moagem a seco e produção de grits Yield and chemical composition of corn cultivate in dry-milling and grits production

    Directory of Open Access Journals (Sweden)

    Rogério Amaro Gonçalves

    2003-06-01

    Full Text Available O milho é uma das principais matérias-primas para a indústria de alimentos. Desse cereal, é possível obter óleo, fubá, canjica, grits, farelo, amido e zeína. Conduziu-se este trabalho com o objetivo de avaliar o rendimento de moagem a seco, produção de grits e composição química de 16 cultivares de milho. Os grãos de milho das 16 cultivares avaliadas tiveram a sua umidade padronizada para 12% e foram submetidos a um processo de limpeza em uma mesa gravimétrica. Encerrada a etapa de limpeza, foram colocados 10 kg de grãos de cada cultivar em degerminador de facas com rotação de 600 rpm por um período de 10 minutos. Após a degerminação, o endosperma foi passado por moinho de rolos corrugados com distância entre rolos de 30 mm. O material moído foi submetido à tamisação em peneiras de 14, 20, 25 e 30 mesh por um período de 10 minutos. Para a degerminação, o delineamento experimental utilizado foi o inteiramente casualizado, com um fator de 16 cultivares e 2 repetições. Na tamisação, o delineamento usado foi com dois fatores: 16 cultivares, 5 peneiras e 2 repetições. A cultivar BR-106, o híbrido duplo BRS-2114 e o híbrido triplo BR-3123 registraram maiores rendimentos (PMaize is one of the major source of energetic an nutritious ingredient for the food industry. From the maize grain it is possible to get oil, meal, grits, bran, starch, zein. The objectives of this research was to evaluate the dry-miling yield and chemical composition of different experimental maize genotypes. Fourteen genotypes came from the breeding program of Embrapa Corn and Sorghum Researcher Center and two came from commercial companies. The grain moisture content of all cultivars were equilibrated at 12% and dust was removed in a gravimetric board, before processing. Grain samples of each type was placed in a blade degermer at 600 rpm rotation speed for 10 minutes. The endosperm portion, after degermination, was transferred to a mill roll

  2. Tres especies de aves acuáticas como bioindicadores de la contaminación por metales pesados del lago de Chapala.

    OpenAIRE

    González González, Deisy Catalina

    2016-01-01

    El lago de Chapala es el más grande del país, cuenta con una superficie de 114 659 ha, y es considerado uno de los más importantes, por los servicios económicos, recreativos y ecológicos que ofrece. Este lago es abastecido principalmente por el Rio Lerma, en el cual se vierten los desechos industriales del estado de México, Querétaro y Guanajuato, así como los desechos urbanos y agropecuarios del estado de Michoacán y Jalisco. Estos desechos al ingresar al lago pueden ser nocivos para l...

  3. Evaluating optimal superficial limb perfusion at different angles using non-invasive micro-lightguide spectrophotometry.

    Science.gov (United States)

    Darmanin, Geraldine; Jaggard, Matthew; Hettiaratchy, Shehan; Nanchahal, Jagdeep; Jain, Abhilash

    2013-06-01

    It is common practice to elevate the limbs postoperatively to reduce oedema and hence optimise perfusion and facilitate rehabilitation. However, elevation may be counterproductive as it reduces the mean perfusion pressure. There are no clear data on the optimal position of the limbs even in normal subjects. The optimal position of limbs was investigated in 25 healthy subjects using a non-invasive micro-lightguide spectrophotometry system "O2C", which indirectly measures skin and superficial tissue perfusion through blood flow, oxygen saturation and relative haemoglobin concentration. We found a reduction in skin and superficial tissue blood flow of 17% (p=0.0001) on arm elevation (180° shoulder flexion) as compared to heart level and an increase in skin and superficial tissue blood flow of 25% (p=0.02) on forearm elevation of 45°. Lower limb skin and superficial tissue blood flow decreased by 15% (p=0.004) on elevation to 47 cm and by 70% on dependency (p=0.0001) compared to heart level. However, on elevation of the lower limb there was also a 28% reduction in superficial venous pooling (p=0.0001) compared to heart level. In the normal limb, the position for optimal superficial perfusion of the upper limb is with the arm placed at heart level and forearm at 45°. In the lower limb the optimal position for superficial perfusion would be at heart level. However, some degree of elevation may be useful if there is an element of venous congestion. Copyright © 2013 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

  4. VARIABILIDAD DE LA TEMPERATURA DE SUPERFICIES EN EL NW DE LA PROVINCIA DE NEUQUÉN A PARTIR DE INFORMCIÓN SATELITAL.

    OpenAIRE

    Marisa G. Cogliati; Mariana Suárez

    2008-01-01

    La complejidad del terreno y la falta de datos meteorológicos siguiendo el gradiente altitudinal obliga a la exploración de nuevos métodos o esquemas entre los que se encuentra el análisis por medio de modelos o imágenes satelitales. El presente trabajo pretende describir el marco de información con el que se cuenta en el NW neuquino y la introducción de análisis espacial de distribución de la temperatura de superficie a partir de imágenes NOAA- AVHRR con miras a la inclusión futura de nuevos...

  5. EVALUACIÓN DEL COMPORTAMIENTO IN VITRO DE RECUBRIMIENTOS DE HIDROXIAPATITA DEPOSITADOS MEDIANTE PROYECCIÓN TÉRMICA POR COMBUSTIÓN OXIACETILÉNICA SOBRE UN SUSTRATO DE Ti6Al4V

    Directory of Open Access Journals (Sweden)

    HAMILTON COPETE

    2013-01-01

    Full Text Available Recubrimientos de Hidroxiapatita sintética producida por precipitación y calcinación a 850 °C fueron depositados sobre sustratos de Ti6Al4V mediante proyección térmica por combustión. Las fases presentes en el material sintetizado y en los recubrimientos elaborados fueron determinadas mediante Difracción de Rayos X. Los recubrimientos fueron evaluados en condiciones in vitro con fluido fisiológico a 37 °C que simula el plasma humano, por periodos de 3, 7, 15 y 30 días. La superficie de los recubrimientos fue caracterizada antes y después de los ensayos in vitro mediante Microscopía Electrónica de Barrido y por Barrido de Energía Dispersiva. La concentración de iones de fosfato y de calcio en el fluido fisiológico fue determinada mediante espectrofotometría. Los resultados de las pruebas in vitro sugieren la acción de dos mecanismos: disolución del recubrimiento en el fluido fisiológico y posterior precipitación de cristales de calcio y fósforo sobre la superficie de la capa de Hidroxiapatita.

  6. Impacto do desmatamento de uma área de mangue no albedo superficial

    Directory of Open Access Journals (Sweden)

    Carlos Alexandre Santos Querino

    2013-12-01

    Full Text Available Manguezais são ecossistemas peculiares encontrados nas regiões tropicais. A degradação dos manguezais altera o balanço superficial de radiação, e por consequência o albedo. Para avaliar e comparar o albedo, nesse ambiente foram instaladas duas plataformas de coletas de dados micrometeorológicos no município de Marechal Deodoro, Alagoas, Brasil, no período de outubro de 2004 a outubro de 2005. No mangue nativo (9º42' 18"S; 35º 48' 32" W foram instalados dois piranômetros acima da copa das árvores, e em outubro de 2005, um terceiro dentro do mangue. Na área degradada (9º 36' 38" S; 35º 46' 03" W, os sensores foram posicionados a uma altura de dois metros em relação ao solo. Observou-se que o albedo sobre a floresta de mangue, em geral, é maior em média, 5 pontos percentuais superior em relação à outras florestas tropicais, como por exemplo, a Amazônia. Internamente notou-se que o mesmo não ultrapassou os 13% e seu valor máximo ocorre no horário de menor albedo da copa ≈ 20%, evidenciando a influência da maré. Já na área degradada, o albedo médio foi de 35%, o que implica em uma elevação aproximada de 49% quando substituída a cobertura de floresta natural.

  7. Grau de moagem dos alimentos em rações para a tilápia do Nilo (Oreochromis niloticus durante o período de reversão sexual - DOI: 10.4025/actascianimsci.v27i1.1245 Milling degree of feed in ration for Nile tilapia (Oreochromis niloticus larvae during sexual reversion phase - DOI: 10.4025/actascianimsci.v27i1.1245

    Directory of Open Access Journals (Sweden)

    Robie Allan Bombardelli

    2005-03-01

    Full Text Available O experimento avaliou o efeito de diferentes graus de moagem dos alimentos sobre o desempenho de larvas de tilápia do Nilo no período de reversão sexual. O delineamento experimental foi inteiramente casualizado com 4 tratamentos e 6 repetições. Os tratamentos foram os graus de moagem dos alimentos em peneira de malhas de 0,25; 0,50; 0,70 e 1,00 mm. Utilizou-se uma ração de modo a atender às necessidades nutricionais da espécie. Foram avaliados peso (PFM, comprimento (CFM, ganho de peso diário (GPD, fator de condição (FC e sobrevivência (S. Os dados foram submetidos à ANOVA e, à análise de regressão em caso de evidência de diferença significativa (P = 0,05. Apenas PFM, GPD e FC apresentaram efeito dos tratamentos, mostrando efeito quadrático (P This work evaluated the effect of different milling degree of feeds on Nile tilapia performance during sex reversal period. A completely randomized design with four treatments and six replicates was utilized. The treatments were the milling degree of feed by 0.25, 0.50, 0.70, and 1.00 mm screen. The diets used fulfilled larvae necessity. Data of weight (W, length (L, daily gain weight (DGW, factor condition (FC and survival (S were evaluated. Data were submitted to ANOVA and regression analysis in case of significant difference were detected (P = 0.05. Only W, DGW and FC presented significant difference between treatments, showing a quadratic effect (P < 0.05 and better results to 0.60, 0.60 and 0.63 mm of feed milling degree, respectively. Diet with milling degree of 0.60 mm screen was recommended to Nile tilapia reversion phase

  8. Evaluación de la Función Neuromuscular del Antebrazo durante contracciones isométricas mediante Electromiografía de Superficie Multicanal

    OpenAIRE

    Mónica Rojas-Martínez; Michelle García; Joan Francesc Alonso; Jesús Marín; Miguel Ángel Mañanas

    2011-01-01

    Resumen: Desarrollo de un protocolo experimental con ejercicios de flexión isométrica de los dedos y muñeca asociado a lesiones de esfuerzo repetitivo, y validación de la electromiografía de superficie multicanal como técnica no invasiva en la monitorización de procesos de rehabilitación, por ejemplo, de la mialgia muscular en músicos pianistas. El análisis de los patrones de activación de tres músculos extensores y un flexor del antebrazo en un grupo control ha permitido obtener resultados r...

  9. Influencia de la molienda en la energía superficial de fritas para esmaltes

    Directory of Open Access Journals (Sweden)

    Tamayo, A.

    2013-04-01

    Full Text Available In this work has been studied the influence of the milling process of two ceramic frits used in the ceramic tile industry. Both glass frits were of similar chemical composition changing SiO2 by 5% of B2O3 and both of them were water or dry milled. Glass frit surfaces were characterized by FT-IR, Karl-Fischer (K-F titration and Inverse Gas Chromatography at Infinite Dilution (IGC-ID. By K-F titration it was observed that water milled frits presented 28 and 26 OH groups for 100 A2 if they do not contain or contain boron, respectively. These surface changes are also observed by IGC-ID. Thus, the glass frit without boron and dry milled presented the highest dispersive surface energy (44 mJ.m-2 and the less acidic constant (0.13 kJ.mol-1. Both glass frits are amphoteric with acidic and base surface active sites, and that frit without boron presents the higher basicity. Milling process influences in the acid-base surface characteristics of both frits by increasing the basicity for the one without boron and increasing for the other one. This has been assigned to the different location of hydroxyl groups where the higher interaction is the one that does not contain boron and dry milled as K-F results.Se ha estudiado el proceso de molienda en dos fritas de la industria cerámica. Las dos fritas, de composiciones similares pero en una se ha sustituido parte de la sílice por 5% de óxido de boro, fueron molidas por vía seca o húmeda y se caracterizaron mediante FT-IR, valoración Karl-Fischer e IGC-ID. Mediante valoración se han determinado los contenidos en moléculas de agua e hidroxilos. El mayor contenido en hidroxilos lo posee la frita sin boro seguida de la de boro ambas molidas en húmedo, poseyendo 28 y 26 grupos OH por cada 100 A2, respectivamente. Estos resultados coinciden con IGC-ID, sin embargo es la frita sin boro molida en seco la de mayor energía superficial (44 mJ.m-2 y constante ácida (0.13 kJ.mol-1. Aunque las dos fritas tienen

  10. Caracterización de la capa formada por nitruración gaseosa del titanio a alta temperatura

    Directory of Open Access Journals (Sweden)

    Rodríguez, D.

    2000-06-01

    Full Text Available Titanium and Ti6Al4V alloy are biocompatible materials. However, their lack of good wear resistance limits their use for some biomedical applications. Surface hardening by nitriding has been studied in order to improve wear resistance of titanium. The results showed an increase of surface hardness, over 300% when compared to non-treated samples. X-ray diffraction data of the surface of the treated samples showed the existence of titanium nitrides, mainly ε-nitrides (Ti2N, although δ−nitrides (TiN were also detected. Selected area diffraction pattern in transmission electron microscope (TEM of nearsurface regions detected the existence of ε-nitrides. TEM observations of regions at depths over 5 μm did not registered any nitride. Therefore, the results suggest that the studied treatment could be used to reduce wear in biomedical applications with light and medium loads.

    El titanio y la aleación Ti6Al4V son materiales que presentan una excelente biocompatibilidad, si bien la falta de una buena resistencia al desgaste dificulta su uso en diversas aplicaciones biomédicas. Se ha estudiado el endurecimiento superficial del titanio por medio de la nitruración gaseosa con el fin de mejorar su resistencia al desgaste. Los resultados obtenidos muestran un gran incremento en la dureza superficial, de un 300% con relación a las muestras no tratadas. Los datos de las difracciones de rayos X de la superficie de las muestras tratadas muestran la existencia de nitruros de titanio, principalmente nitruros-ε (Ti2N, si bien también fueron detectados nitruros-δ (TiN. La difracción de electrones realizada en microscopio electrónico de transmisión (TEM de regiones subsuperficiales de las muestras tratadas también detectaron la existencia de nitruros-ε. Observaciones con TEM de zonas a distancias de la superficie superiores a 5 μm no revelaron la existencia de nitruros. Por tanto, los resultados obtenidos indican que el tratamiento de

  11. MOSFET dosimetry in-vivo at superficial and orthovoltage x-ray energies

    International Nuclear Information System (INIS)

    Cheung, T.; Yu, P.K.N.; Butson, M.J.; Illawarra Cancer Care Centre, Wollongong, NSW

    2003-01-01

    This note investigates in-vivo dosimetry using a Metal Oxide Semiconductor Field Effect Transistor (MOSFET) for radiotherapy treatment at superficial and orthovoltage x-ray energies. This was performed within one fraction of the patients treatment. Standard measurements along with energy response of the detector are given. Results showed that the MOSFET measurements in-vivo agreed with calculated results on average within ± 5.6% over all superficial and orthovoltage energies. These variations were slightly larger than TLD results with variations between measured and calculated results being ± 5.0% for the same patient measurements. The MOSFET device provides adequate in-vivo dosimetry for superficial and orthovoltage energy treatments with the accuracy of the measurements seeming to be relatively on par with TLD in our case. The MOSFET does have the advantage of returning a relatively immediate dosimetric result after irradiation. Copyright (2003) Australasian College of Physical Scientists and Engineers in Medicine

  12. Use of superficial peroneal nerve graft for treating peripheral nerve injuries

    Directory of Open Access Journals (Sweden)

    Samuel Ribak

    2016-02-01

    Full Text Available ABSTRACT OBJECTIVE: To evaluate the clinical results from treating chronic peripheral nerve injuries using the superficial peroneal nerve as a graft donor source. METHODS: This was a study on eleven patients with peripheral nerve injuries in the upper limbs that were treated with grafts from the sensitive branch of the superficial peroneal nerve. The mean time interval between the dates of the injury and surgery was 93 days. The ulnar nerve was injured in eight cases and the median nerve in six. There were three cases of injury to both nerves. In the surgery, a longitudinal incision was made on the anterolateral face of the ankle, thus viewing the superficial peroneal nerve, which was located anteriorly to the extensor digitorum longus muscle. Proximally, the deep fascia between the extensor digitorum longus and the peroneal longus muscles was dissected. Next, the motor branch of the short peroneal muscle (one of the branches of the superficial peroneal nerve was identified. The proximal limit of the sensitive branch was found at this point. RESULTS: The average space between the nerve stumps was 3.8 cm. The average length of the grafts was 16.44 cm. The number of segments used was two to four cables. In evaluating the recovery of sensitivity, 27.2% evolved to S2+, 54.5% to S3 and 18.1% to S3+. Regarding motor recovery, 72.7% presented grade 4 and 27.2% grade 3. There was no motor deficit in the donor area. A sensitive deficit in the lateral dorsal region of the ankle and the dorsal region of the foot was observed. None of the patients presented complaints in relation to walking. CONCLUSIONS: Use of the superficial peroneal nerve as a graft source for treating peripheral nerve injuries is safe and provides good clinical results similar to those from other nerve graft sources.

  13. LINEAMIENTOS PARA LA FORMULACIÓN DE PAGOS POR SERVICIOS AMBIENTALES. ESTUDIO DE CASO: ALTA CUENCA DEL RÍO SAUCE GRANDE. ARGENTINA

    Directory of Open Access Journals (Sweden)

    Gerardo Andrés Denegri

    2010-01-01

    Full Text Available Los objetivos de este trabajo son: presentar un diagnóstico integral de los principales problemas ambientales generados a partir de la pérdida de suelo por erosión hídrica superficial y exponer los principales lineamientos para la formulación del PSA de la Cuenca Alta del Río Sauce Grande. Metodológicamente se procedió a caracterizar el área en estudio, cuantificar la degradación por erosión hídrica superficial, describir las actividades productivas, conocer los principales consumidores de agua, definir los principales actores del sistema, e identificar los Servicios Ambientales, factibles de ser incluidos en un sistema de PSA. La cuenca presenta procesos erosivos de diferente magnitud y en algunas zonas dificultades en el abastecimiento de agua para la población. Existe un proceso de cambio en el uso de suelo de ganadero a agrícola y a turismo rural. Se concluye que en la cuenca existen condiciones para la implementación de un PSA porque se detectaron dos servicios ambientales factibles de ser pagados: agua y paisaje, con demanda creciente y existen actores e instituciones factibles de ejecutarlo.

  14. Tensión- Deformación durante la deformación Plástica Superficial con rodillo // Stress-deformation during the Surfaces Plastic deformation with roller.

    Directory of Open Access Journals (Sweden)

    T. Fernández-Columbié

    2009-09-01

    Full Text Available Se establece el procedimiento para el endurecimiento del acero 45 a través de la DeformaciónPlástica por rodadura con el empleo de un torno marca 16 D 20 y un rodillo como elementodeformante. En el trabajo se muestra la forma de sujeción de la pieza entre plato y punto, métodoempleado para evitar la flexión de la pieza durante el proceso de elaboración, se muestran lasvariables del diseño de experimento numero de revolución, avance y fuerza, las cuales permitenrealizar el procesamiento estadísticos de los datos, lo que luego son graficado para obtener elcomportamiento de las curvas de fuerza contra dureza y avance contra dureza y demostrar elincremento de la dureza superficial en la medida que se incrementa el valor de las variables. Sedescriben los pasos para la preparación metalografica de la probeta desde el corte de la misma conel empleo de cuchilla del tipo SANVIDK, hasta el pulido para la observación metalografica, donde sedetermina el comportamiento de la red cristalina por el tensionamiento de los granos y elendurecimiento por acritud.Palabras claves: deformación plástica, dureza superficial, rodadura, acritud._______________________________________________________________________________AbstractThe procedure settles down for the hardening of the steel 45 through the Plastic Deformation forrolling with the employment of a lathe 16 D 20 and a roller like element deformante. In the workthe form of subjection of the piece is shown between plate and point, method used to avoid theflexion of the piece during the trial of elaboration, the variables of the experiment design areshown I number of revolution, advance and it forces, which allow to carry out the statisticalprosecution of the data, that are graph to obtain the behavior of the curves of force againsthardness and advance against hardness and to demonstrate the increment of the superficialhardness in the measure that the value of the variables is increased. The steps are

  15. Superficies in the form of the right to superpose

    Directory of Open Access Journals (Sweden)

    Simona CHIRICĂ

    2015-06-01

    Full Text Available The purpose of this paper is to present the current legal framework related to the superficies right in the form of the right to superpose, and especially to draw the attention and put certain question marks regarding the actuality or even the urgency of the need for regulation regarding the right to superpose. First, as a preliminary aspect, in order to emphasize the historical evolution of the superficies right, we will briefly present the development of this concept starting from the Roman law up to the present date. Second, by analysing the relevant legislation, the doctrine and the jurisprudence, the authors set themselves to present the main methods for constituting the superficies right. Third, the characteristics related to the right to superpose will be correlatively laid out. Fourth, the possibility to obtain a building permit on the basis of the right to superpose will also be analysed. Fifth, the recently entered-into-force legislative framework regarding the registration of the right to superpose and of the building thus erected is presented. Last but not least, the conclusions of this paper are presented, highlighting the necessity for more clearly defined rules regulating the legal status of the right to superpose, in order to avoid any confusions and inconsistencies in practice.

  16. Estudio comparativo de la rugosidad superficial en cerámicas de ultra baja fusión

    OpenAIRE

    Ccahuana Vásquez, Vanessa Zulema; Leite de Oliveira Morais, Andréia Alves; Sussumu Nishioka, Renato; Tomomitsu Kimpara, Estevão

    2015-01-01

    El objetivo de este trabajo fue comparar la rugosidad superficial en cerámicas de baja y ultra baja fusión, después del pulido mecánico y exposición a un medio corrosivo in vitro. El análisis de la superficie (Ra) fue realizado con un rugosímetro. Se confeccionaron 72 discos, divididos en cuatro grupos según el sistema cerámico utilizado: VitadurAplha (G1), Titankeramik (G2), HeraCeram (G3) y Finesse (G4), y según el tratamiento de superficie: (A) especímenes sin tratamiento de superficie. (B...

  17. Pneumodissection for skin protection in image-guided cryoablation of superficial musculoskeletal tumours.

    Science.gov (United States)

    Maybody, Majid; Tang, Peter Q; Moskowitz, Chaya S; Hsu, Meier; Yarmohammadi, Hooman; Boas, F Edward

    2017-03-01

    Pneumodissection is described as a simple method for preventing skin injury during cryoablation of superficial musculoskeletal tumours. Superficial tumour cryoablations performed from 2009 to 2015 were retrospectively reviewed. Pneumodissection was performed in 13 patients when the shortest tumour-skin distance was less than 25 mm. Indications were pain palliation (n = 9) and local tumour control (n = 4). Patients, target tumours, technical characteristics and complications up to 60 days post ablation were reviewed. The ice ball-skin distances with and without pneumodissection were compared by a paired t-test and further assessed for association with covariates using ANCOVA. Technical success for ablation was 12 of 13. The mean shortest tumour-skin distance was 15.0 mm (3.2-24.5 mm). The mean thickness of pneumodissection was 9.6 mm (5.2-16.6 mm) resulting in mean elevation of skin of 3.4 mm (1.2-5.3 mm). Mean shortest ice ball-skin distance after pneumodissection was 10.5 mm (4.2-19.7 mm). No infection or systemic air embolism was noted. No intraprocedural frostbite was observed. Pneumodissection is feasible, effective and safe in protecting the skin during image-guided cryoablation of superficial tumours. • Frostbite during image-guided cryoablation of superficial tumours is commonly under-reported. • Frostbites are painful and may introduce infection into the superficial ablation zone. • Warm compress, saline and CO 2 have shortcomings in protecting the skin. • Pneumodissection is free, readily available, easy to use and safe and effective.

  18. Use your eyes - metallographic versus superficial traces of the crafting of Bronze Age ornaments

    DEFF Research Database (Denmark)

    Nørgaard, Heide Wrobel

    and superficial archaeological examinations can be used to understand prehistoric craft. Furthermore, it will show that with an intensive knowledge about previous scientific investigations the superficial traces preserved can reveal a great amount of information and could talk for themselves. Taking as an example...... the early and middle Bronze Age bronze ornaments from North Germany, superficial traces of the metal crafting process, visible with the naked eye, will be compared with metallographic images. The aim of this presentation is to give an overview over the crafting traces everybody could see (with a bit...

  19. Modificação da rugosidade de fibras de carbono por método químico para aplicação em compósitos poliméricos

    Directory of Open Access Journals (Sweden)

    Burakowski Liliana

    2001-01-01

    Full Text Available O presente trabalho aborda o tratamento superficial de fibras de carbono por ácidos clorídrico e nítrico, visando o aumento controlado da rugosidade superficial da fibra e assim melhorar a ligação fibra/matriz no processamento de compósitos poliméricos reforçados com fibras longas. Foram utilizadas fibras de carbono com size, da empresa Toray. Essas foram tratadas com os ácidos clorídrico e nítrico, a 103°C, em concentrações de 35,5 % e 97 %, em massa, respectivamente, em tempos de exposição de 5, 10, 20, 30, 40 e 60 minutos. As fibras modificadas quimicamente foram caracterizadas por microscopia eletrônica de varredura e por ensaios mecânicos de tração e os dados foram tratados pelo método estatístico de Weibull. Os resultados mostram que os tratamentos empregados modificam a superfície da fibra e que períodos de tratamento superiores a 20 minutos as danificam, degradando de maneira significativa as suas propriedades mecânicas.

  20. Intravesical Gemcitabine for Treatment of Superficial Bladder ...

    African Journals Online (AJOL)

    Objectives: Intravesical Bacillus Calmette-Guérin (BCG) vaccine is the mainstay of treatment and prophylaxis in superficial bladder cancer (SBC) as it reduces tumor recurrence and disease progression. About one-third of patients do not respond to BCG. The aim of this study was to determine the efficacy of intravesical ...

  1. Intensidade de fluorescência em resina composta: influência do polimento superficial e dos meios de armazenagem

    Directory of Open Access Journals (Sweden)

    Ângela Dalla Nora

    Full Text Available INTRODUÇÃO: A resina composta é um material versátil em Odontologia Estética, principalmente por suas propriedades ópticas, dentre as quais a fluorescência. Poucos são os estudos que avaliaram esta propriedade e a comparação dos resultados encontrados torna-se difícil em função da inexistência de padronização nas metodologias na confecção e na armazenagem dos corpos de prova. OBJETIVO: Verificar a influência do polimento superficial e do meio de armazenagem, em estudos in vitro, em que se avalia a propriedade óptica de fluorescência em resinas compostas. MATERIAL E MÉTODO: Foram preparados 70 corpos de prova circulares (10 mm × 2 mm com resina composta microhíbrida (Opallis,- A2E - FGM. Os meios de armazenagem foram: água deionizada, água da torneira e saliva artificial. Os protocolos de polimento superficial, realizados em politriz após a obtenção dos corpos de prova, utilizaram lixas de granulações 600, 1200 e 2500. Os valores de intensidade de fluorescência foram avaliados através do espectrofotômetro Cary Eclipse, após 1, 7 e 21 dias. RESULTADO: Não houve diferença estatisticamente significativa na Intensidade de Fluorescência entre os grupos submetidos aos diferentes protocolos de polimento. Quanto aos meios de armazenagem, a partir do sétimo dia, a variação de fluorescência foi significativamente maior em água da torneira e deionizada, quando comparada à variação observada em saliva artificial, resultado que se manteve após 21 dias. CONCLUSÃO: O protocolo de polimento superficial não promoveu alterações significativas na fluorescência da resina composta avaliada. Quanto ao meio de armazenagem, a intensidade de fluorescência foi menos afetada quando em saliva artificial.

  2. Effect of prophylactic treatments on the superficial roughness of dental tissues and of two esthetic restorative materials Efeito de tratamentos profiláticos na rugosidade superficial de tecidos dentais e de dois materiais restauradores estéticos

    Directory of Open Access Journals (Sweden)

    Daniele Salami

    2003-03-01

    -pomes e pasta de branco de espanha - sobre a rugosidade superficial de dois materiais restauradores - resina composta e compômero - e de duas superfícies dentais - esmalte e cemento/dentina - através da análise rugosimétrica e de microscopia eletrônica de varredura. A análise estatística dos resultados rugosimétricos mostrou que a profilaxia com pedra-pomes sobre o esmalte produziu uma superfície estatisticamente mais lisa do que a natural. Entretanto, comparando-se o efeito dos três tratamentos, a rugosidade superficial produzida pela pedra-pomes foi maior do que a produzida pelos outros tratamentos tanto para esmalte quanto para cemento/dentina, provavelmente por ser mais abrasiva, sendo que para a superfície de resina composta a rugosidade produzida pela pedra-pomes foi maior apenas do que a produzida pelo branco de espanha. Já para o compômero, os três tratamentos se comportaram de maneira semelhante. Podemos afirmar, baseando-nos na análise de rugosimetria e nas imagens das micrografias eletrônicas de varredura das superfícies estudadas, que os tratamentos profiláticos empregados não aumentaram a rugosidade das superfícies tratadas. Comparando-se os efeitos das três técnicas, estes foram diferentes, dependendo das superfícies em que foram empregadas.

  3. Artroplastía de superficie en cadera. Resultados iniciales favorables en pacientes selectos. [Hip resurfacing arthroplasty: favorable initial results in selected patients

    Directory of Open Access Journals (Sweden)

    Fernando Martín Comba

    2013-12-01

    Full Text Available In­tro­duc­ción El objetivo del presente trabajo es reportar los resultados clínicos y radiológicos iniciales de una serie consecutiva de pacientes selectos tratados en nuestra institución con un único diseño de artroplastia de superficie, comparando además la tasa de revisión temprana con un grupo control de pacientes tratados en el mismo lapso con una artroplastia total de cadera no cementada. Material y ­Métodos Cuarenta y siete pacientes de sexo masculino (49 caderas con diagnóstico de artrosis de cadera que fueron tratados quirúrgicamente con una artroplastia híbrida de superficie, entre noviembre de 2006 y julio de 2009. La edad promedio fue de 44,5 años (rango de 21 a 57. En todos los casos, la indicación de la artroplastia de superficie se realizó en pacientes jóvenes con alta expectativa funcional y siguiendo estrictos criterios de selección radiológicos. Se efectuó un seguimiento clínico y un meticuloso análisis radiológico. Resultados La escala funcional posoperatoria de Merle D’Aubigné-Postel fue, en promedio, de 17,3 puntos a los 43 meses de seguimiento promedio (rango 24-62 meses. El 85% de los pacientes refirió que practicaba alguna actividad deportiva con una escala UCLA promedio de 9,5 (rango 8-10. Un paciente requirió una cirugía de revisión (2,04% por fractura de cuello femoral. No existieron diferencias estadísticamente significativas en cuanto a la tasa de revisión temprana comparando con el grupo control (p = 0,55. Conclusiones En nuestra experiencia inicial con artroplastia de superficie, obtuvimos resultados a corto plazo favorables, en una serie de hombres con artrosis y alta demanda funcional, estrictamente seleccionados.

  4. Vascular patterns of upper limb: an anatomical study with accent on superficial brachial artery

    Directory of Open Access Journals (Sweden)

    David Kachlik

    2011-02-01

    Full Text Available The aim of the study was to evaluate the terminal segmentation of the axillary artery and to present four cases of anomalous branching of the axillary artery, the superficial brachial artery (arteria brachialis superficialis, which is defined as the brachial artery that runs superficially to the median nerve. Totally, 130 cadaveric upper arms embalmed by classical formaldehyde technique from collections of the Department of Anatomy, Third Faculty of Medicine, Charles University in Prague, were macroscopically dissected with special focus on the branching arrangement of the axillary artery. The most distal part of the axillary artery (infrapectoral part terminated in four cases as a bifurcation into two terminal branches: the superficial brachial artery and profunda brachii artery, denominated according to their relation to the median nerve. The profunda brachii artery primarily gave rise to the main branches of the infrapectoral part of the axillary artery. The superficial brachial artery descended to the cubital fossa where it assumed the usual course of the brachial artery in two cases and in the other two cases its branches (the radial and ulnar arteries passed superficially to the flexors. The incidence of the superficial brachial artery in our study was 5% of cases. The reported incidence is a bit contradictory, from 0.12% to 25% of cases. The anatomical knowledge of the axillary region is of crucial importance for neurosurgeons and specialists using the radiodiagnostic techniques, particularly in cases involving traumatic injuries. The improved knowledge would allow more accurate diagnostic interpretations and surgical treatment.

  5. Superficial evolution and compacting aptitude of uranium dioxide powders

    International Nuclear Information System (INIS)

    Danroc, J.

    1982-04-01

    Long term storage of UO 2 powder improves slightly shaping and solidity of compacted powder. The aim of this work is the study of material evolution and the increase of this evolution rate for application to industrial fabrication. Aging in wet air at different temperatures is examined. Evolution of texture and superficial composition is followed. Below 80 0 C UO 3 , 2H 2 O is formed at crystal surface and thermal decomposition gives different hydrates. Kinetics of the transformation is studied. Oxidohydratation in liquid phase is rapid with hydrogen peroxide. The aged or treated material is compacted and mechanical behaviour is examined. Improvement is explained by inter-layer water molecule of the superficial hydrate giving lubricant and pseudo-plastic properties [fr

  6. Caracterizacion dosimetrica del equipo de Terapia Superficial Therapax del Hospital Mexico

    International Nuclear Information System (INIS)

    Bernui De Vivanco, Maria Giselle; Rojas Rivas, Jorge; Cardenas Retuerto, Augusto

    2007-01-01

    The Servicio de Radioterapia of the Hospital Mexico in San Jose, Costa Rica has a Superficial Therapy equipment Therapax model DXT 300. It describes the measurements for the dosimetric characterization of the configurations 100 kVp, 25 mA and filter of 2.4 mm of Al, and 250 kVp, 10 mA and filter of 2.5 mm of Cu, taking into account that the uncertainties in the measurements of the superficial therapy equipment are higher than in the rank of the megavoltage [es

  7. Área superficial de carbones activados y modificados obtenidos del recurso agrícola Saccharum officinarum

    Directory of Open Access Journals (Sweden)

    Fredy Colpas C.

    2017-12-01

    Full Text Available El carbón activado es un material utilizado industrialmente en adsorción de gases, filtrados, limpieza de líquidos y como soporte para catalizadores en medios no oxidantes. Además tiene varias aplicaciones ambientales como en la adsorción de iones metálicos de plomo. El objetivo de este trabajo fue la obtención de carbones activados carbonizando biomasa de caña de azúcar a 400°C en atmósfera de nitrógeno, activando con ácido fosfórico y oxidando con ácido nítrico o peróxido de hidrógeno seguido de tratamiento térmico. La preparación de carbones activados a partir de residuos agrícolas está desarrollándose con excelentes resultados potencialmente aplicables. Bajo este contexto, se muestra un método de preparación mediante activación química con ácido fosfórico, la cual aumentó el contenido de carbono y disminuyó el de oxígeno, seguidamente con el objeto de estudiar el desarrollo del área superficial se somete a proceso de oxidación con calentamiento térmico. Los carbones obtenidos fueron caracterizados mediante análisis proximal y para la determinación de los grupos funcionales oxigenados se utilizó la espectroscopia infrarroja de reflectancia difusa-transformada de Fourier. La determinación de grupos oxigenados básicos y ácidos se realizó por el método Boehm. Para la medición del área superficial se utilizó el método BET. El área de microporos se incrementó por el tratamiento con HNO3 y H2O2 desde 278 m2/g hasta 402 y 446m2/g, respectivamente. La mayor parte del área en los carbones se debió a los microporos. El pH de los carbones fue aproximadamente de tres y los grupos COOH alcanzaron valores hasta 2,12meq/g.

  8. Mecanismos de oxidaciones fotosensibilizadas de nucleótidos púricos y pirimidínicos por pterinas de interés biomédico

    OpenAIRE

    Serrano, Mariana Paula

    2014-01-01

    La radiación UV es la porción más energética del espectro solar que alcanza la superficie terrestre. Este tipo de radiación y, en mucha menor proporción, la luz visible, son capaces de modificar la estructura química de ciertas macromoléculas y metabolitos presentes en los tejidos. En particular, los cambios químicos sufridos por las proteínas y por el ADN producen graves consecuencias a nivel celular. Dichos efectos van desde disfunciones en el metabolismo celular hasta la muerte, pasando po...

  9. Comportamiento a fatiga del acero sae 4140 usando alta rugosidad superficial y ambiente corrosivo

    OpenAIRE

    CEBALLOS, WILSON FERNANDO; GÓMEZ, ADOLFO LEÓN; CORONADO, JOHN JAIRO

    2010-01-01

    En este artículo se presenta el estudio del comportamiento a fatiga del acero SAE 4140 en condiciones diferentes: superficie pulida (acabado espejo), ambiente corrosivo (jugo de caña de azúcar), alta rugosidad superficial (superficie equivalente a la encontrada típicamente en los ejes de molino de caña) y una condición que involucra la combinación de las dos últimas. Las anteriores condiciones están presentes en los ejes de maza de molino de caña de azúcar durante el proceso de molienda. Se r...

  10. COMPORTAMIENTO A FATIGA DEL ACERO SAE 4140 USANDO ALTA RUGOSIDAD SUPERFICIAL Y AMBIENTE CORROSIVO

    OpenAIRE

    CEBALLOS, WILSON FERNANDO; GÓMEZ, ADOLFO LEÓN; CORONADO, JOHN JAIRO

    2010-01-01

    En este artículo se presenta el estudio del comportamiento a fatiga del acero SAE 4140 en condiciones diferentes: superficie pulida (acabado espejo), ambiente corrosivo (jugo de caña de azúcar), alta rugosidad superficial (superficie equivalente a la encontrada típicamente en los ejes de molino de caña) y una condición que involucra la combinación de las dos últimas. Las anteriores condiciones están presentes en los ejes de maza de molino de caña de azúcar durante el proceso de molienda. Se r...

  11. Isolated core vs. superficial cooling effects on virtual maze navigation.

    Science.gov (United States)

    Payne, Jennifer; Cheung, Stephen S

    2007-07-01

    Cold impairs cognitive performance and is a common occurrence in many survival situations. Altered behavior patterns due to impaired navigation abilities in cold environments are potential problems in lost-person situations. We investigated the separate effects of low core temperature and superficial cooling on a spatially demanding virtual navigation task. There were 12 healthy men who were passively cooled via 15 degrees C water immersion to a core temperature of 36.0 degrees C, then transferred to a warm (40 degrees C) water bath to eliminate superficial shivering while completing a series of 20 virtual computer mazes. In a control condition, subjects rested in a thermoneutral (approximately 35 degrees C) bath for a time-matched period before being transferred to a warm bath for testing. Superficial cooling and distraction were achieved by whole-body immersion in 35 degree water for a time-matched period, followed by lower leg immersion in 10 degree C water for the duration of the navigational tests. Mean completion time and mean error scores for the mazes were not significantly different (p > 0.05) across the core cooling (16.59 +/- 11.54 s, 0.91 +/- 1.86 errors), control (15.40 +/- 8.85 s, 0.82 +/- 1.76 errors), and superficial cooling (15.19 +/- 7.80 s, 0.77 +/- 1.40 errors) conditions. Separately reducing core temperature or increasing cold sensation in the lower extremities did not influence performance on virtual computer mazes, suggesting that navigation is more resistive to cooling than other, simpler cognitive tasks. Further research is warranted to explore navigational ability at progressively lower core and skin temperatures, and in different populations.

  12. Functional compartmentalization of the human superficial masseter muscle.

    Directory of Open Access Journals (Sweden)

    Rodrigo A Guzmán-Venegas

    Full Text Available Some muscles have demonstrated a differential recruitment of their motor units in relation to their location and the nature of the motor task performed; this involves functional compartmentalization. There is little evidence that demonstrates the presence of a compartmentalization of the superficial masseter muscle during biting. The aim of this study was to describe the topographic distribution of the activity of the superficial masseter (SM muscle's motor units using high-density surface electromyography (EMGs at different bite force levels. Twenty healthy natural dentate participants (men: 4; women: 16; age 20±2 years; mass: 60±12 kg, height: 163±7 cm were selected from 316 volunteers and included in this study. Using a gnathodynamometer, bites from 20 to 100% maximum voluntary bite force (MVBF were randomly requested. Using a two-dimensional grid (four columns, six electrodes located on the dominant SM, EMGs in the anterior, middle-anterior, middle-posterior and posterior portions were simultaneously recorded. In bite ranges from 20 to 60% MVBF, the EMG activity was higher in the anterior than in the posterior portion (p-value = 0.001.The center of mass of the EMG activity was displaced towards the posterior part when bite force increased (p-value = 0.001. The topographic distribution of EMGs was more homogeneous at high levels of MVBF (p-value = 0.001. The results of this study show that the superficial masseter is organized into three functional compartments: an anterior, a middle and a posterior compartment. However, this compartmentalization is only seen at low levels of bite force (20-60% MVBF.

  13. [Occupational trauma due to superficial corneal foreign body].

    Science.gov (United States)

    Gerente, Vanessa Miroski; Melo, Gustavo Barreto de; Regatieri, Caio Vinícius Saito; Alvarenga, Lênio Souza; Martins, Elizabeth Nogueira

    2008-01-01

    To evaluate the epidemiology of superficial corneal foreign body. Patients who were seen at the Emergency Service of the Federal University of São Paulo, from April/05 to June/05, were screened and those with superficial corneal foreign body were interviewed. Data regarding gender, age, occupation, employment status, availability and use of protective devices and supervision of their use were collected. Awareness of the possible complications was also assessed. Results were analyzed using chi-square or Fisher exact test. One hundred twenty-three patients were interviewed. Only 3 patients were female. The mean age was 36 years. Most injuries occurred at the workplace (86.2%), and 58.4% of the patients did not have a legal employment registration. The occupational activities most frequently reported were construction related activities (44.3%) and welding/soldering (11.3%). In most workplaces (79.8%) protective devices were available and 85.3% of the patients were instructed to use them. A safety device was being used during the accident in 34.2% of the cases and this was more frequent among patients that had legal employment registry (p=0.008) and among those under supervision (p=0.0415). The majority of the patients (68.9%) were aware of the risk of severe complications. Most patients with superficial corneal foreign body are aware of its severe complications and injuries usually occur in places where safety devices are available and often during their use. Our findings suggest that prevention should focus on supervision and correct use of safety devices.

  14. Comportamiento del acabado superficial de la pieza y el desgaste de la herramienta al fresar aluminio con altas velocidades de corte en fresadoras cnc convencionales. // Superficial finish behavior and tool wear in aluminium milling with high cutting spee

    Directory of Open Access Journals (Sweden)

    F. Martínez Aneiro

    2006-05-01

    Full Text Available La demanda de componentes mecánicos de alta calidad y gran exactitud para sistemas de elevado desempeño estaaumentando considerablemente en los últimos años a nivel mundial. Este hecho ha provocado el desarrollo de nuevastecnologías aplicadas a los procesos de corte.El desarrollo integral de las máquinas herramientas (controles, husillos de alta velocidad de las herramientas de corte(nuevos materiales para los substratos y capas y de la tecnología de maquinado posibilitó la aplicación del corte con altasvelocidades de corte (High speed Cutting HSC. El aumento de las velocidades de corte es una de las formas de aumentar laeficiencia de los procesos productivos a través de la reducción de los tiempos de fabricación. La reducción en varias vecesde los tiempos de fabricación, se logra no solo por los tiempos de maquinado sino también por la sustitución o minimizarotros procesos de elaboración que forman parte de la cadena productiva, los cuales en ocasiones son relativamente lentoscomo son la electroerosión, el acabado manual en la producción de moldes y troqueles así como los cambios deoperaciones de la pieza.Por ser un proceso relativamente nuevo, introduciéndose a partir de la década de los años 90 aun existen muchas cuestionestecnológicas que están sin respuesta. Es interés del presente trabajo, mostrar los efectos de las altas velocidades de cortesobre la vida útil de la herramienta y el acabado superficial en la pieza, trabajando en máquinas fresadoras de CNC¨convencionales¨. Los resultados muestran que dentro de los parámetros estudiados la durabilidad de la herramienta y elacabado superficial mejoran y que el comportamiento de la máquina es estable a pesar de no estar concebida para el nuevoconcepto de altas velocidades.Palabras Claves: Altas velocidades de corte, HSC, HSM desgaste, acabado superficial.______________________________________________________________________________Abstract.The demand of

  15. Clinicomycological Characterization of Superficial Mycoses from a Tertiary Care Hospital in Nepal

    OpenAIRE

    Khadka, Sundar; Sherchand, Jeevan Bahadur; Pokharel, Dinesh Binod; Pokhrel, Bharat Mani; Mishra, Shyam Kumar; Dhital, Subhash; Rijal, Basista

    2016-01-01

    Background. Superficial mycosis is a common fungal infection worldwide, mainly caused by dermatophytes. However, the prevalence of species varies geographically. In addition, fungal treatment is best guided according to species isolated. This study was carried out to determine the clinical as well as mycological profile of superficial mycoses in a tertiary care hospital, Nepal. Methods. This was a prospective case-control laboratory based study conducted over a period of six months from Janua...

  16. Topographical anatomy of superficial veins, cutaneous nerves, and arteries at venipuncture sites in the cubital fossa.

    Science.gov (United States)

    Mikuni, Yuko; Chiba, Shoji; Tonosaki, Yoshikazu

    2013-01-01

    We investigated correlations among the superficial veins, cutaneous nerves, arteries, and venous valves in 128 cadaveric arms in order to choose safe venipuncture sites in the cubital fossa. The running patterns of the superficial veins were classified into four types (I-IV) and two subtypes (a and b). In types I and II, the median cubital vein (MCV) was connected obliquely between the cephalic and basilic veins in an N-shape, while the median antebrachial vein (MAV) opened into the MCV in type I and into the basilic vein in type II. In type III, the MCV did not exist. In type IV, additional superficial veins above the cephalic and basilic veins were developed around the cubital fossa. In types Ib-IVb, the accessory cephalic vein was developed under the same conditions as seen in types Ia-IVa, respectively. The lateral cutaneous nerve of the forearm descended deeply along the cephalic vein in 124 cases (97 %), while the medial cutaneous nerve of the forearm descended superficially along the basilic vein in 94 (73 %). A superficial brachial artery was found in 27 cases (21 %) and passed deeply under the ulnar side of the MCV. A median superficial antebrachial artery was found in 1 case (1 %), which passed deeply under the ulnar side of the MCV and ran along the MAV. Venous valves were found at 239 points in 28 cases with superficial veins, with a single valve seen at 79 points (33 %) and double valves at 160 points (67 %). At the time of intravenous injection, caution is needed regarding the locations of cutaneous nerves, brachial and superficial brachial arteries, and venous valves. The area ranging from the middle segment of the MCV to the confluence between the MCV and cephalic vein appears to be a relatively safe venipuncture site.

  17. Managment of superficial infantile capillary hemangiomas with topical timolol maleate solution.

    Science.gov (United States)

    Rizvi, Syed Ali Raza; Yusuf, Faraz; Sharma, Rajeev; Rizvi, Syed Wajahat Ali

    2015-01-01

    Capillary hemangioma is the most common benign tumor of eyelids and orbit in children. Recently, a topical beta blocker has been reported as an effective treatment for superficial capillary hemangiomas. We present a case report of two children having large capillary hemangiomas who responded well to topical treatment by 0.5% timolol maleate solution. After 12 months of treatment, the lesion has significantly reduced in size, thickness, and color in both cases. Thus, we conclude that long-term use of topical 0.5% timolol maleate solution is safe and effective in treating superficial capillary hemangiomas.

  18. ANÁLISIS DE SISTEMAS ASFALTO-AGREGADO A PARTIR DE MEDICIONES DE ENERGÍA SUPERFICIAL LIBRE

    Directory of Open Access Journals (Sweden)

    ALLEX E. ALVAREZ

    2012-01-01

    Full Text Available La energía superficial libre (ESL es una propiedad termodinámica fundamental de los materiales que puede ser empleada para cuantificar la calidad de la adhesión entre diversos materiales, la susceptibilidad de éstos a perder su adhesión por la presencia de agua en el sistema y la capacidad del recubrimiento de un material sobre otro con diferentes valores de ESL (i.e., humectabilidad. Estos principios son aplicables a diferentes materiales, incluidos los sistemas asfalto-agregado (i.e., mezclas asfálticas. El presente trabajo tiene como objetivo principal presentar un análisis, basado en mediciones de ESL de los materiales constitutivos de las mezclas asfálticas, mediante el cual se puede cuantificar la calidad de la adhesión, la susceptibilidad al daño por humedad y la calidad del recubrimiento del asfalto sobre el agregado en diversos sistemas asfalto-agregado. Las mediciones de ESL de asfaltos y agregados fueron realizadas en laboratorio a través del método de la Placa Wilhelmy y de la Máquina de Adsorción Universal (USD, respectivamente. Los materiales evaluados incluyeron asfaltos colombianos y agregados de origen colombiano y norteamericano. El análisis específico consistió en evaluar el efecto de procesos industriales de modificación y la adición de llenante mineral sobre la calidad de la adhesión, la susceptibilidad al daño por humedad y la humectabilidad de diversos sistemas asfalto-agregado. Los resultados sugieren que la medición de la ESL de asfaltos y agregados es una herramienta eficiente para evaluar la compatibilidad y el desempeño esperado de diversos sistemas asfalto-agregado, así como los cambios inducidos a nivel fundamental por diferentes procesos propios de la fabricación de mezclas asfálticas (e.g., adición de llenante mineral.

  19. Effects of pressure drop and superficial velocity on the bubbling fluidized bed incinerator.

    Science.gov (United States)

    Wang, Feng-Jehng; Chen, Suming; Lei, Perng-Kwei; Wu, Chung-Hsing

    2007-12-01

    Since performance and operational conditions, such as superficial velocity, pressure drop, particles viodage, and terminal velocity, are difficult to measure on an incinerator, this study used computational fluid dynamics (CFD) to determine numerical solutions. The effects of pressure drop and superficial velocity on a bubbling fluidized bed incinerator (BFBI) were evaluated. Analytical results indicated that simulation models were able to effectively predict the relationship between superficial velocity and pressure drop over bed height in the BFBI. Second, the models in BFBI were simplified to simulate scale-up beds without excessive computation time. Moreover, simulation and experimental results showed that minimum fluidization velocity of the BFBI must be controlled in at 0.188-3.684 m/s and pressure drop was mainly caused by bed particles.

  20. Arsénico total no deseado ante valores referenciales de ph en agua superficial, cuenca hidrográfica sama, Región Tacna-Perú

    OpenAIRE

    Morales Cabrera, Dante U; Avendaño Cáceres, Edgardo; Zevallos Ramos, Daniel; Fernández Prado, Julio; Mendoza Rodas, Zoila L; Torres Ventura, Amparo

    2017-01-01

    El arsénico representa un peligro para los ecosistemas y la salud humana donde su biodisponibilidad inmediata en las aguas superficiales puede estar condicionado por parámetros físico-químicos como el pH. El propósito del estudio fue determinar las concentraciones de arsénico total ante valores de pH en el agua superficial de la cuenca hidrográfica-Sama, Región Tacna-Perú. Durante agosto y noviembre del 2016 como abril y junio del 2017 se realizó un muestreo probabilístico en cuatro puntos re...

  1. Investigation of the behaviour of a LILW superficial repository under aircraft impact

    International Nuclear Information System (INIS)

    Lo Frano, Rosa; Stefanini, Lorenzo

    2016-01-01

    Highlights: • Safety assessment of a LILW superficial repository. • Investigation of the consequences of an aircraft impact with fuel burning. • Experimental material properties. • Numerical simulation of aircraft impact with fuel burning accident by MSC.MARC"© code. • Demonstration that the overall integrity resulted is guaranteed. - Abstract: Safety and security are the two fundamental aspects to guarantee when designing a LILW superficial repository. Because of its safety concern, we have to prove, and build confidence in, the primary and secondary consequences of the crashing will be acceptable. These goals are obtained generally by means of safety assessment supported by calculations. This study is intended to investigate the performance of a superficial repository subjected to aircraft impact and fuel burning. To the purpose a superficial repository similar to that of El Cabril has been considered. Moreover to be confident the facility is safe and that the consequences of such a type of accident on the environment and humans are negligible, an appropriate safety assessment was carried out. The potential damage that aircraft impact could bring into the repository has been therefore analysed and discussed. To attain the intent load functions, calculated according to the Riera approach, and the maximum temperature reached by fuel during its combustion have been considered. FEM (thermo-mechanical) simulations have been done, by MSC"© Marc code, assuming damaging phenomena of concrete and material properties variation with the temperature. The obtained results showed that an empty superficial repository with a wall thickness, ranging from 0.7 to 1 m, is not sufficient to avoid penetration. Nevertheless even in presence of a reduced strength and of (cone) cracking and plugging, the overall integrity resulted guaranteed.

  2. Investigation of the behaviour of a LILW superficial repository under aircraft impact

    Energy Technology Data Exchange (ETDEWEB)

    Lo Frano, Rosa, E-mail: rosa.lofrano@ing.unipi.it; Stefanini, Lorenzo

    2016-04-15

    Highlights: • Safety assessment of a LILW superficial repository. • Investigation of the consequences of an aircraft impact with fuel burning. • Experimental material properties. • Numerical simulation of aircraft impact with fuel burning accident by MSC.MARC{sup ©} code. • Demonstration that the overall integrity resulted is guaranteed. - Abstract: Safety and security are the two fundamental aspects to guarantee when designing a LILW superficial repository. Because of its safety concern, we have to prove, and build confidence in, the primary and secondary consequences of the crashing will be acceptable. These goals are obtained generally by means of safety assessment supported by calculations. This study is intended to investigate the performance of a superficial repository subjected to aircraft impact and fuel burning. To the purpose a superficial repository similar to that of El Cabril has been considered. Moreover to be confident the facility is safe and that the consequences of such a type of accident on the environment and humans are negligible, an appropriate safety assessment was carried out. The potential damage that aircraft impact could bring into the repository has been therefore analysed and discussed. To attain the intent load functions, calculated according to the Riera approach, and the maximum temperature reached by fuel during its combustion have been considered. FEM (thermo-mechanical) simulations have been done, by MSC{sup ©} Marc code, assuming damaging phenomena of concrete and material properties variation with the temperature. The obtained results showed that an empty superficial repository with a wall thickness, ranging from 0.7 to 1 m, is not sufficient to avoid penetration. Nevertheless even in presence of a reduced strength and of (cone) cracking and plugging, the overall integrity resulted guaranteed.

  3. MR-angiogram-added surface anatomy scanning of superficial cerebral arteriovenous malformations

    Energy Technology Data Exchange (ETDEWEB)

    Tsuchiya, Kazuhiro; Katase, Shichiro; Yoshino, Ayako; Hachiya, Junichi [Department of Radiology, Kyorin University School of Medicine, 6-20-2, Shinkawa, Mitaka, Tokyo 181-8611 (Japan); Shiokawa, Yoshiaki [Department of Neurosurgery, Kyorin University School of Medicine, 6-20-2, Shinkawa, Mitaka, Tokyo 181-8611 (Japan)

    2002-09-01

    Our purpose was to evaluate the utility of surface anatomy scanning (SAS) of the brain with superimposition of MR angiograms in the diagnosis and presurgical planning of superficial cerebral arteriovenous malformations (AVMs). We performed SAS in 15 patients with superficial cerebral AVMs. Two-dimensional phase-contrast MR angiograms were then obtained in the same section and superimposed on the SAS images. The images were assessed regarding the visualization of each AVM component using a four-point grading scale (3=excellent to 0=poor). In 13 of the patients, the assessment was made comparing with conventional angiograms. The images were also compared with the surgical findings in 5 patients. The added images agreed well with the angiographic findings and demonstrated the relationships between the AVM components and the adjacent brain surface. The average scores of the feeder(s), nidus, and drainer(s) were 2.27, 2.33, and 2.67, respectively. The surgical findings also correlated well with the added images. Our technique can noninvasively demonstrate superficial AVMs along with the brain surface and provide information useful for planning surgery. (orig.)

  4. MR-angiogram-added surface anatomy scanning of superficial cerebral arteriovenous malformations

    International Nuclear Information System (INIS)

    Tsuchiya, Kazuhiro; Katase, Shichiro; Yoshino, Ayako; Hachiya, Junichi; Shiokawa, Yoshiaki

    2002-01-01

    Our purpose was to evaluate the utility of surface anatomy scanning (SAS) of the brain with superimposition of MR angiograms in the diagnosis and presurgical planning of superficial cerebral arteriovenous malformations (AVMs). We performed SAS in 15 patients with superficial cerebral AVMs. Two-dimensional phase-contrast MR angiograms were then obtained in the same section and superimposed on the SAS images. The images were assessed regarding the visualization of each AVM component using a four-point grading scale (3=excellent to 0=poor). In 13 of the patients, the assessment was made comparing with conventional angiograms. The images were also compared with the surgical findings in 5 patients. The added images agreed well with the angiographic findings and demonstrated the relationships between the AVM components and the adjacent brain surface. The average scores of the feeder(s), nidus, and drainer(s) were 2.27, 2.33, and 2.67, respectively. The surgical findings also correlated well with the added images. Our technique can noninvasively demonstrate superficial AVMs along with the brain surface and provide information useful for planning surgery. (orig.)

  5. Superficial Velocity Effects on HZ-PAN and AgZ-PAN for Kr/Xe Capture

    Energy Technology Data Exchange (ETDEWEB)

    Welty, Amy Keil [Idaho National Lab. (INL), Idaho Falls, ID (United States); Garn, Troy Gerry [Idaho National Lab. (INL), Idaho Falls, ID (United States); Greenhalgh, Mitchell Randy [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-04-01

    Nearly all previous testing of HZ-PAN and AgZ-PAN was conducted at the same flow rate in order to maintain consistency among tests. This testing was sufficient for sorbent capacity determinations, but did not ensure that sorbents were capable of functioning under a range of flow regimes. Tests were conducted on both HZ-PAN and AgZ-PAN at superficial velocities between 20 and 700 cm/min. For HZ-PAN, Kr capacity increased from 60 mmol/kg to 110 mmol/kg as superficial velocity increased from 21 to 679 cm/min. Results for AgZ-PAN were similar, with capacity ranging from 72 to 124 mmol/kg over the same range of superficial. These results are promising for scaling up to process flows, demonstrating flexibility to operate in a broad range of superficial velocities while maintaining sorbent capacity. While preparing for superficial velocity testing it was also discovered that AgZ-PAN Xe capacity, previously observed to diminish over time, could be recovered with increased desorption temperature. Further, a substantial Xe capacity increase was observed. Previous room temperature capacities in the range of 22-25 mmol Xe/kg AgZ-PAN were increased to over 60 mmol Xe/kg AgZ-PAN. While this finding has not yet been fully explored to optimize activation and desorption temperatures, it is encouraging.

  6. Myxoid stroma and delicate vasculature of a superficial angiomyxoma give rise to the red planet sign

    OpenAIRE

    Green, Margaret; Logemann, Nichola; Sulit, Daryl J

    2014-01-01

    Superficial angiomyxomas are uncommon benign mesenchymal tumors. They often recur locally if partially removed. This case report demonstrates not only the characteristic pathological findings of a superficial angiomyxoma in a 33- year-old man, but also shows a unique dermatoscopic image, which in our estimation resembles a celestial red planet such as the blood moon seen during a lunar eclipse. We propose to call this the “red planet” sign for a superficial angiomyxoma on dermoscopic examinat...

  7. Myxoid stroma and delicate vasculature of a superficial angiomyxoma give rise to the red planet sign.

    Science.gov (United States)

    Green, Margaret; Logemann, Nichola; Sulit, Daryl J

    2014-09-16

    Superficial angiomyxomas are uncommon benign mesenchymal tumors. They often recur locally if partially removed. This case report demonstrates not only the characteristic pathological findings of a superficial angiomyxoma in a 33- year-old man, but also shows a unique dermatoscopic image, which in our estimation resembles a celestial red planet such as the blood moon seen during a lunar eclipse. We propose to call this the "red planet" sign for a superficial angiomyxoma on dermoscopic examination.

  8. Surface tension of calcium hydroxide associated with different substances Tensão superficial do hidróxido de cálcio associado a diferentes substâncias

    Directory of Open Access Journals (Sweden)

    Carlos Estrela

    2005-06-01

    Full Text Available The purpose of this study was to evaluate the surface tension of calcium hydroxide (CH associated with different substances (deionized distilled water, camphorated paramonochlorophenol, 2% chlorhexidine digluconate, Otosporin, 3% sodium lauryl ether sulphate; Furacin, PMC Furacin using tensiometer. The action of the substances studied on the dentinal structure enhances the property of surface tension. This method consists in the application of force to separate a platinum ring immersed in the substances. Thus, torsion was applied to the screw until the platinum ring separated during substances testing. Considering the methodology applied, the following can be concluded: distilled water alone or associated with CH presented a high surface tension (70.00 and 68.40 dynes/cm; calcium hydroxide in association with anionic detergent showed low surface tension (31.60 dynes/cm; camphorated paramonochlorophenol plus CH presented low surface tension (37.50 dynes/cm; 2% chlorhexidine associated with calcium hydroxide showed high surface tension values (58.00 dynes/cm; Otosporin plus calcium hydroxide showed low surface tension (35.40 dynes/cm; paramonochlorophenol Furacin mixed with calcium hydroxide presented surface tension equal to 45.50 dynes/cm; sodium hypochlorite presented high surface tension (75.00 dynes/cm. Antimicrobial agents more indicated in endodontics, i.e. CH, chlorhexidine and hypochlorite, presented the highest surface tension.Estudou-se a tensão superficial do hidróxido de cálcio associado a diferentes substâncias (água destilada deionizada, paramonoclorofenol canforado, digluconato de clorexidina 2%, Otosporin, sulfato éter lauril sódio 3%, furacin, PMC furacin usando tensiômetro. O modelo experimental consistiu na aplicação de uma força para separar um anel de platina imerso na superfície das substâncias, exercido por um tensiômetro. Considerando a metodologia aplicada, pode-se concluir: a água destilada isolada ou

  9. Modelado físico de la incidencia de un chorro de aire sobre una superficie de agua

    Directory of Open Access Journals (Sweden)

    Zenit, R.

    2010-10-01

    Full Text Available The use of gas jets (oxygen plays a key role in several steelmaking processes as in the Basic Oxygen Furnace (BOF or in the Electric Arc Furnace (EAF. Those jets improve heat, mass and momentum transfer in the liquid metal, mixing of chemical species enhancing and govern the formation of foaming slag. In this work experimental measurements were performed to determine the dimensions of the cavity formed at the liquid free surface caused by a gas jet impinging on it; also velocities vectors were measured in the zone affected by the gas jet. Cavities were measured from images from high speed camera and the vector maps were obtained with a Particle Image Velocimetry (PIV technique. Both velocities and cavities were determined as a function of the main process variables: gas flow rate, distance of the nozzle from the free surface and lance angle. Cavity dimensions were statistically processed treated as a function of the process variables and also as a function of the proper dimensionless numbers that govern these phenomena. It was found thatWeber and Froude numbers govern the cavity geometry. Liquid flow driven by the jet is mainly affected by the air flow rate, lance height and angle.El uso de chorros de gas (oxígeno es fundamental en diversos procesos de aceración, como el Horno Básico de Oxígeno (BOF, por sus siglas en inglés o en el Horno Eléctrico de Arco (EAF. Estos chorros mejoran la transferencia de calor, masa y cantidad de movimiento en el metal y el mezclado de especies y son muy importantes en la formación de escoria espumosa. En este trabajo, se realizaron mediciones experimentales de las dimensiones de la cavidad formada en la superficie líquida por la incidencia de un chorro, así como también se obtuvieron vectores de velocidad en la zona aledaña a dicha cavidad. Éstas, se midieron usando una cámara de alta velocidad, mientras que los mapas vectoriales se obtuvieron por la técnica PIV (Particle Image Velocimetry. Las

  10. Interdigital foot infections: Corynebacterium minutissimum and agents of superficial mycoses

    Directory of Open Access Journals (Sweden)

    Fatma Mutlu Sariguzel

    2014-09-01

    Full Text Available Interdigital foot infections are mostly caused initially by dermatophytes, yeasts and less frequently by bacteria. Erythrasma caused by Corynebacterium minutissimum can be confused with superficial mycoses. The aim of the study was to determine the prevalence of the etiologic agents of superficial mycoses and the frequency of Corynebacterium minutissimum in interdigital foot infections. All the samples obtained from the 121 patients with interdigital foot infections were examined directly with the use of 20% potassium hydroxide mounts and Gram stain under the microscope and cultured on Sabouraud's dextrose agar plates. In identification of superficial mycoses, the rate was found to be 14% with the cultural method and 14% with direct microscopic examination. Using a combination of direct microscopic examination and culture, a 33.8% ratio was achieved. In the culture of these samples, the most isolated factor was Trichophyton rubrum (33.7%. In 24 of the patients (19.8% Corynebacterium minutissimum was detected by Gram staining, in 6 of these patients Trichophyton rubrum was found, Trichophyton mentagrophytes was found in 2 and Trichosporon spp. was found in 1. The examination of interdigital foot lesions in the laboratory, the coexistence of erythrasma with dermatophytes and yeast should be considered.

  11. REMOCIÓN DE CROMO VI DE SOLUCIONES ACUOSAS POR ADSORCIÓN SOBRE CARBONES ACTIVADOS MODIFICADOS

    Directory of Open Access Journals (Sweden)

    Nubia Céspedes

    2009-05-01

    Full Text Available En este trabajo se determina la adsorción de Cr6+ de disoluciones acuosas en dos carbones activados comerciales en función del grado de modificación (reducción, oxidación de la superficie de los adsorbentes con tratamientos térmicos en presencia de hidrógeno, oxígeno y ácido nítrico. La química superficial de los carbones activados originales y modificados se examina por los métodos de titulaciones de Böehm y descomposición con temperatura programada (DTP. Los ensayos de evaluación de la capacidad de adsorción se realizan con soluciones modelo de ión cromato y bajo distintas condiciones de concentración inicial, tiempo de contacto, pH del medio, temperatura y masa de adsorbente. Se comprueba que la modificación de la superficie de los adsorbentes afecta el grado de adsorción del ión cromato en la medida en que los sólidos tratados con H2 muestran la mayor  capacidad de remoción. Las variables que afectan favorablemente la extensión de la remoción de cromo son: concentración inicial de 100 ppm,  pH  inicial de  2,0, temperatura de 25 °C y  masa de adsorbente de 100 mg. 

  12. Induction of superficial cortical layer neurons from mouse embryonic stem cells by valproic acid.

    Science.gov (United States)

    Juliandi, Berry; Abematsu, Masahiko; Sanosaka, Tsukasa; Tsujimura, Keita; Smith, Austin; Nakashima, Kinichi

    2012-01-01

    Within the developing mammalian cortex, neural progenitors first generate deep-layer neurons and subsequently more superficial-layer neurons, in an inside-out manner. It has been reported recently that mouse embryonic stem cells (mESCs) can, to some extent, recapitulate cortical development in vitro, with the sequential appearance of neurogenesis markers resembling that in the developing cortex. However, mESCs can only recapitulate early corticogenesis; superficial-layer neurons, which are normally produced in later developmental periods in vivo, are under-represented. This failure of mESCs to reproduce later corticogenesis in vitro implies the existence of crucial factor(s) that are absent or uninduced in existing culture systems. Here we show that mESCs can give rise to superficial-layer neurons efficiently when treated with valproic acid (VPA), a histone deacetylase inhibitor. VPA treatment increased the production of Cux1-positive superficial-layer neurons, and decreased that of Ctip2-positive deep-layer neurons. These results shed new light on the mechanisms of later corticogenesis. Copyright © 2011 Elsevier Ireland Ltd and the Japan Neuroscience Society. All rights reserved.

  13. Spectral characterization of superficial coal groups

    International Nuclear Information System (INIS)

    Ahmad, I.; Khan, M.A.; Ishaq, M.; Shakirullah; Bahadur, A.

    2004-01-01

    Spectral characterization of superficial coal groups was performed in KBr pellets. KBr Pellets were prepared for virgin and variously pretreated coal samples. Spectra of satisfactory resolution were obtained in wave number range-4000-400 cm /sup -1/. Presence of broad absorption bands corresponds to hydroxyl, carbonyl, carboxyl and phenolic functionalities in the spectra clearly define their presence in all samples understudy. Forced oxidation proved effective for oxidation of both aliphatic and aromatic configurations, which can be revealed from the respective spectra. (author)

  14. Temperature distributions in 136 superficial radiothermotherapies

    International Nuclear Information System (INIS)

    Willich, N.; Duve, S.; Pfluger, T.; Bachmeier, K.

    1992-01-01

    Temperature distributions from 136 superficial radiothermotherapies in patients were analysed and three-dimensionally reconstructed. The calculation of mean values and standard deviations of the temperature measuring probes considering water bolus temperature, master probe temperature, site of the probes relatively to different applicator positions and site of the probes in the heated tissues yielded satisfactory temperature distributions for chest wall treatment in contrast to other regions of the body. Radiothermotherapy was statistically not superior to radiotherapy alone with respect to local tumor control. (authors)

  15. EFECTO DEL PROCESAMIENTO TÉRMICO SOBRE EL COLOR SUPERFICIAL DEL PIMENTÓN ROJO (Capsicum annuum VARIEDAD 'NATALY'

    Directory of Open Access Journals (Sweden)

    JADER MARTÍNEZ-GIRÓN

    Full Text Available El color es uno de los parámetros más importantes a la hora de medir la calidad de productos que van a ser procesados a partir del pimentón rojo (Capsicum annuum, para la fabricación de condimentos, colorantes, conservas y aderezos. En este estudio, se evaluó el efecto del procesamiento térmico (freído y conserva con respecto al cambio de color y los carotenoides en frutos de pimentón rojo. Para el freído se utilizó aceite de soya a una temperatura de 175°C por 5 min; en la elaboración de la conserva, se realizó un proceso de escaldado y pasteurización a 100°C durante 15 min. Después de los tratamientos térmicos (freído y conserva la concentración de carotenoides totales y el color superficial en los frutos de pimentón rojo se afectaron significativamente. El proceso de freído obtiene los valores medios más altos de unidades ASTA (72,214, Carotenoides Totales (95,464, L* (38,26 y a* (34,13. La conserva registró los atributos más altos de color b* (21,81, h° (30,42, IP (145,40 y ΔE* (4,56-31,84. Estos resultados evidencian que el freído es una operación que mejora el atributo de color, al aumentar la disponibilidad de carotenoides e incrementar el color superficial a*.

  16. Superficial Temporal Artery Pseudoaneurysm: A Conservative Approach in a Critically Ill Patient

    International Nuclear Information System (INIS)

    Grasso, Rosario Francesco; Quattrocchi, Carlo Cosimo; Crucitti, Pierfilippo; Carboni, Giampiero; Coppola, Roberto; Zobel, Bruno Beomonte

    2007-01-01

    A 71-year-old man affected by cardio- and cerebrovascular disease experienced an accidental fall and trauma to the fronto-temporal area of the head. A few weeks later a growing mass appeared on his scalp. A diagnosis of superficial temporal artery pseudoaneurysm was made following CT and color Doppler ultrasound. His clinical condition favoured a conservative approach by ultrasound-guided compression and subsequent surgical resection. A conservative approach should be considered the treatment of choice in critically ill patients affected by superficial temporal artery pseudoaneurysm

  17. Avaliação do desempenho de canal gramado na remoção de material suspenso em escoamento superficial pluvial

    Directory of Open Access Journals (Sweden)

    Rodrigo Braga Moruzzi

    Full Text Available RESUMO Neste trabalho, buscou-se avaliar o desempenho de canal gramado na remoção de material suspenso presente em escoamento superficial em unidade construída em escala real. Para tal, foram investigadas diferentes concentrações iniciais de material particulado, o qual foi descarregado por meio de chuvas simuladas em canal de 100 m de extensão e declividade de 2%. As medidas de material particulado foram feitas mediante a análise de sólidos suspensos totais (SST em diferentes posições ao longo do canal. Os hidrogramas de descarregamento e as lâminas de água no canal foram monitorados durante a passagem da onda de cheia. Avaliaram-se as frações removidas para cada evento isolado e também em conjunto, por intermédio da interpolação por krigagem. Remoções da ordem de 50% foram obtidas para a posição de 50 m do canal gramado e de 70% para a posição de 80 m. Os resultados mostraram que a remoção de material particulado é fortemente dependente da extensão do canal e que os aspectos dinâmicos decorrentes da passagem da onda de cheia influenciam no processo.

  18. Modifications in concrete superficial properties due to the use of different formworkrelease agents and plastic additives

    Directory of Open Access Journals (Sweden)

    Beltramone, A.

    2003-06-01

    Full Text Available The actual research study, carried out in the Laboratory of Construction Materials of the ETSAM., analyses the modifications in superficial properties (regarding colour and texture of grey Portland cement mortars due to the use of different formworks release agents (car oil, mineral oil and paraffin and to the addition of plastic superplasticiser to the mixture (Bettor and Sika trademarks. Once the test samples were obtained, a digital registration was made by giving them values in terms of colour and texture observed changes using computer programmes, referring those values to the test specimen (only cement, no additives. A migration of the polymeric particles of the additives towards the surface was observed, presenting the following modifications: Colour: darker hues than those of the test specimen sample were registered in the specimens with additives. Texture: the texture of the test specimen containing additives such as modified polycarboxilic ethers, polycarboxilic ethers; modified organic polymers and modified synthetic melamine were much smoother than the one in test specimen. Test specimens containing melamine, condensed naftalensulphate and polycarboxilic derivatives were a bit rougher but still smoother than the test specimen. The same variation of results as for the colour properties was obtained for the texture as regards to the use of formworks release agents, varying from smoothest to roughest with the car oil.

    El presente estudio experimental, realizado en las instalaciones del Laboratorio de Materiales de Construcción de la ETSAM, analiza las modificaciones de las propiedades superficiales observadas (en cuanto a color y textura en morteros de cemento portland gris, por la utilización de desencofrantes diversos (aceite de automóvil, aceite mineral y desencofrante parafínico, y la incorporación de aditivos superfluidificantes plásticos en la mezcla (de las marcas Bettor y Sika. Una vez obtenidas las diferentes

  19. Ie - riss: una herramienta computacional para la estimación de pérdidas por sismo en edificaciones

    OpenAIRE

    SIERRA ÁLVAREZ, CÉSAR AUGUSTO; JARAMILLO FERNÁNDEZ, JUAN DIEGO

    2012-01-01

    Una formulación probabilista para estimar tasas de excedencia de pérdidas por terremoto es presentada. Luego de exponer la utilidad de este tipo de modelos, se presenta la formulación matemática de un modelo Poissoniano que considera la incertidumbre de variables tales como: magnitud en la fuente, intensidad del movimiento en el basamento rocoso, intensidad del movimiento a nivel de la superficie del suelo y daño en las edificaciones. Los resultados se sintetizan en las tasas de excedencia an...

  20. Esophagectomy for Superficial Esophageal Neoplasia.

    Science.gov (United States)

    Watson, Thomas J

    2017-07-01

    Endoscopic therapies have become the standard of care for most cases of Barrett's esophagus with high-grade dysplasia or intramucosal adenocarcinoma. Despite a rapid and dramatic evolution in treatment paradigms, esophagectomy continues to occupy a place in the therapeutic armamentarium for superficial esophageal neoplasia. The managing physician must remain cognizant of the limitations of endoscopic approaches and consider surgical resection when they are exceeded. Esophagectomy, performed at experienced centers for appropriately selected patients with early-stage disease can be undertaken with the expectation of cure as well as low mortality, acceptable morbidity, and good long-term quality of life. Copyright © 2017 Elsevier Inc. All rights reserved.

  1. Superficial Siderosis of the Central Nervous System Caused by Hemorrhagic Intraventricular Craniopharyngioma: Case Report and Literature Review

    Science.gov (United States)

    TOSAKA, Masahiko; SATO, Koji; AMANUMA, Makoto; HIGUCHI, Tetsuya; ARAI, Motohiro; AISHIMA, Kaoru; SHIMIZU, Tatsuya; HORIGUCHI, Keishi; SUGAWARA, Kenichi; YOSHIMOTO, Yuhei

    2015-01-01

    Superficial siderosis is a rare condition caused by hemosiderin deposits in the central nervous system (CNS) due to prolonged or recurrent low-grade bleeding into the cerebrospinal fluid (CSF). CNS tumor could be one of the sources of bleeding, both pre- and postoperatively. We report an extremely rare case of superficial siderosis associated with purely third ventricle craniopharyngioma, and review previously reported cases of superficial siderosis associated with CNS tumor. A 69-year-old man presented with headache, unsteady gait, blurred vision, and progressive hearing loss. Brain magnetic resonance (MR) imaging with gadolinium revealed a well enhanced, intraventricular mass in the anterior part of the third ventricle. T2*-weighted gradient echo (GE) MR imaging revealed a hypointense rim around the brain particularly marked within the depth of the sulci. Superficial siderosis was diagnosed based on these findings. The tumor was diffusely hypointense on T2*-weighted GE imaging, indicating intratumoral hemorrhage. The lateral ventricles were dilated, suggesting hydrocephalus. [18F]fluorodeoxyglucose positron emission tomography revealed increased uptake in the tumor. The whole brain surface appeared dark ocher at surgery. Histological examination showed the hemorrhagic tumor was papillary craniopharyngioma. His hearing loss progressed after removal of the tumor. T2*-weighted GE MR imaging demonstrated not only superficial siderosis but also diffuse intratumoral hemorrhage in the tumor. Superficial siderosis and its related symptoms, including hearing loss, should be considered in patients with hemorrhagic tumor related to the CSF space. Purely third ventricle craniopharyngioma rarely has hemorrhagic character, which could cause superficial siderosis and progressive hearing loss. PMID:24670310

  2. A method for determination of the superficial charge density

    International Nuclear Information System (INIS)

    Vila, F.

    1992-10-01

    In this article is presented a new methodism for determination of superficial charge density in nonconducting materials which is based in the combination of laboratory calibrated experiments in conducting surfaces with theoretical calculations for nonconducting surfaces. (author). 19 refs, 7 figs, 1 tab

  3. Frey′s Syndrome as a Sequela of Superficial Parotidectomy

    Directory of Open Access Journals (Sweden)

    Rishi Kumar Bali

    2006-01-01

    The disorder is characterized by unilateral sweating and flushing of facial skin in the area of parotid gland occurring during meals. We present a case of a patient who developed symptoms of Frey Syndrome 4 months after undergoing superficial parotidectomy on left side.

  4. Treatment for superficial infusion thrombophlebitis of the upper extremity

    NARCIS (Netherlands)

    Di Nisio, Marcello; Peinemann, Frank; Porreca, Ettore; Rutjes, Anne W. S.

    2015-01-01

    Although superficial thrombophlebitis of the upper extremity represents a frequent complication of intravenous catheters inserted into the peripheral veins of the forearm or hand, no consensus exists on the optimal management of this condition in clinical practice. To summarise the evidence from

  5. Unexpected diagnosis of superficial neurofibroma in a lesion with imaging features of a vascular malformation

    Energy Technology Data Exchange (ETDEWEB)

    O' Keefe, Patrick; Reid, Janet; Morrison, Stuart [Cleveland Clinic Foundation, Department of Radiology, Cleveland, OH (United States); Vidimos, Allison [Cleveland Clinic Foundation, Department of Dermatology, Cleveland, OH (United States); DiFiore, John [Cleveland Clinic Foundation, Department of Pediatric Surgery, Cleveland, OH (United States)

    2005-12-01

    Plexiform neurofibroma is a pathognomonic, often disabling feature of neurofibromatosis type I. Although the target-like appearance of deep plexiform neurofibroma on T2-weighted MRI has been well-described, a second superficial form of plexiform neurofibroma has differing imaging features. We report a 15-year-old boy who presented with multiple cutaneous lesions exhibiting clinical and imaging characteristics of a venolymphatic malformation. These lesions were histologically proved to represent superficial plexiform neurofibromas. We wish to emphasize the unique MR findings of superficial plexiform neurofibromas; these findings are different from the imaging characteristics of the deep form and can be confused with a low-flow vascular malformation. (orig.)

  6. Improved superficial brain hemorrhage visualization in susceptibility weighted images by constrained minimum intensity projection

    Science.gov (United States)

    Castro, Marcelo A.; Pham, Dzung L.; Butman, John

    2016-03-01

    Minimum intensity projection is a technique commonly used to display magnetic resonance susceptibility weighted images, allowing the observer to better visualize hemorrhages and vasculature. The technique displays the minimum intensity in a given projection within a thick slab, allowing different connectivity patterns to be easily revealed. Unfortunately, the low signal intensity of the skull within the thick slab can mask superficial tissues near the skull base and other regions. Because superficial microhemorrhages are a common feature of traumatic brain injury, this effect limits the ability to proper diagnose and follow up patients. In order to overcome this limitation, we developed a method to allow minimum intensity projection to properly display superficial tissues adjacent to the skull. Our approach is based on two brain masks, the largest of which includes extracerebral voxels. The analysis of the rind within both masks containing the actual brain boundary allows reclassification of those voxels initially missed in the smaller mask. Morphological operations are applied to guarantee accuracy and topological correctness, and the mean intensity within the mask is assigned to all outer voxels. This prevents bone from dominating superficial regions in the projection, enabling superior visualization of cortical hemorrhages and vessels.

  7. Diagnostic and therapeutic challenges in superficial CNS siderosis

    DEFF Research Database (Denmark)

    Kondziella, Daniel; Lindelof, M.; Haziri, Donika

    2015-01-01

    the challenges related to the diagnosis and treatment of superficial siderosis. RESULTS: A potential bleeding aetiology was identified in all patients, but removal of the offending bleeding source was achieved only in three (33%). Symptom progression was halted in just one patient (11%), which suggests...... neurotoxicity due to accumulating iron toxicity. FUNDING: not relevant. TRIAL REGISTRATION: not relevant....

  8. Gamma Activation Analysis in the Havana Bay superficial sediments

    International Nuclear Information System (INIS)

    Lopez, N.; Gelen, A.; Diaz Riso, O.; Manso, M.V.; Simon, M.J.; Maslov, A.G.; Gustova, M.V.; Beltran, J.; Soto, J.

    2003-01-01

    A preliminary study of 26 elements of Havana Bay superficial sediments were made using Gamma Activation Analysis. Samples from five zones of Havana Bay were analyzed. The results show a close interrelation between the concentration levels of the studied elements and the contaminant sources

  9. Evaluación de la severidad de un plano en la superficie de rodadura de las ruedas de un tren

    Directory of Open Access Journals (Sweden)

    Elkin G. Flórez

    2012-01-01

    Full Text Available La presencia de planos, aunque incipientes, en la superficie de rodadura es causa de un rápido deterioro del contacto rueda-carril con las consecuencias que ello conlleva tanto para el entorno corno para el propio material rodante. Es por ello que la detección de estos planos, antes que se hagan aparentes por sus consecuencias, es de gran interés y motivo de estudio. En este trabajo se presentan algunos de los resultados obtenidos en una extensa campaña de medidas llevadas a cabo en una linea del Ferrocarril Metropolitano de Barcelona. La vibración del carril al paso de las ruedas se detecta mediante un acelerómetro situado en el pie del carril y el instante exacto de paso de las ruedas por la sección donde se encuentra el acelerómetro se determina mediante la deformación cortante del alma del carril. Se proponen, y aplican a los registros experimentales, distintos indicadores para cuantificar la severidad de los planos. Uno de los aspectos analizados a partir de los datos experimentales es la variación del pico de energia de la vibración detectada en función de la distancia entre la sección donde incide un plano con la via y el acelerómetro. Este pico debe normalizarse para establecer correctamente la severidad del plano.

  10. In vivo high-resolution 3D photoacoustic imaging of superficial vascular anatomy

    International Nuclear Information System (INIS)

    Zhang, E Z; Laufer, J G; Beard, P C; Pedley, R B

    2009-01-01

    The application of a photoacoustic imaging instrument based upon a Fabry-Perot polymer film ultrasound sensor to imaging the superficial vasculature is described. This approach provides a backward mode-sensing configuration that has the potential to overcome the limitations of current piezoelectric based detection systems used in superficial photoacoustic imaging. The system has been evaluated by obtaining non-invasive images of the vasculature in human and mouse skin as well as mouse models of human colorectal tumours. These studies showed that the system can provide high-resolution 3D images of vascular structures to depths of up to 5 mm. It is considered that this type of instrument may find a role in the clinical assessment of conditions characterized by changes in the vasculature such as skin tumours and superficial soft tissue damage due to burns, wounds or ulceration. It may also find application in the characterization of small animal cancer models where it is important to follow the tumour vasculature over time in order to study its development and/or response to therapy.

  11. Photoluminescence of a superficial Si nanolayer and an example of its use

    International Nuclear Information System (INIS)

    Ley, M.; Svrcek, V.; Kuznicki, Z.T.

    2003-01-01

    A characteristic photoluminescence of a superficial Si nanolayer realized by ion implantation has been observed. This effect, being totally independent of those shown recently for a nanoscale Si-layered system, is similar to that produced by Si nanocrystals (Si nc). To visualize the nature and give evidence of this effect, we fabricated samples in two different ways: (i) by incorporation of Si nc into thin SiO 2 films deposited on Si wafer by the spin-on-glass method and (ii) by a nanoscale superficial crystalline-Si modification using medium-energy ion implantation and thermal treatment. In both cases the UV-to-red light conversion has been observed to be independent of wafer post-implantation damage. To show the UV-to-red conversion contribution, we use the ion modified superficial Si layer with its well-defined potential barrier, the so-called carrier collection limit. Such a modified Si structure gives us a method of deconvoluting several optoelectronic features observed experimentally on modified Si. The practical realization is compatible with well-established Si technology

  12. In vivo high-resolution 3D photoacoustic imaging of superficial vascular anatomy

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, E Z; Laufer, J G; Beard, P C [Department of Medical Physics and Bioengineering, University College London, Gower Street, London, WC1E 6BT (United Kingdom); Pedley, R B [UCL Cancer Institute, Paul O' Gorman Building, University College London, 72 Huntley St, London WC1E 6BT (United Kingdom)

    2009-02-21

    The application of a photoacoustic imaging instrument based upon a Fabry-Perot polymer film ultrasound sensor to imaging the superficial vasculature is described. This approach provides a backward mode-sensing configuration that has the potential to overcome the limitations of current piezoelectric based detection systems used in superficial photoacoustic imaging. The system has been evaluated by obtaining non-invasive images of the vasculature in human and mouse skin as well as mouse models of human colorectal tumours. These studies showed that the system can provide high-resolution 3D images of vascular structures to depths of up to 5 mm. It is considered that this type of instrument may find a role in the clinical assessment of conditions characterized by changes in the vasculature such as skin tumours and superficial soft tissue damage due to burns, wounds or ulceration. It may also find application in the characterization of small animal cancer models where it is important to follow the tumour vasculature over time in order to study its development and/or response to therapy.

  13. Volumetric and superficial characterization of carbon activated

    International Nuclear Information System (INIS)

    Carrera G, L.M.; Garcia S, I.; Jimenez B, J.; Solache R, M.; Lopez M, B.; Bulbulian G, S.; Olguin G, M.T.

    2000-01-01

    The activated carbon is the resultant material of the calcination process of natural carbonated materials as coconut shells or olive little bones. It is an excellent adsorbent of diluted substances, so much in colloidal form, as in particles form. Those substances are attracted and retained by the carbon surface. In this work is make the volumetric and superficial characterization of activated carbon treated thermically (300 Centigrade) in function of the grain size average. (Author)

  14. Neurothekeoma palpebrae in association with multiple superficial angiomyxomas: Tegumental Angiomyxoma- Neurothekeoma syndrome (TAN syndrome

    Directory of Open Access Journals (Sweden)

    Tan Aik Kah

    2011-09-01

    Full Text Available We report a case of 10-year-old Indian girl with history of multiple superficial angiomyxoma, presented with three months history of painless right upper lid swelling. There were no visual dysfunctions. Previously, the patient had multiple superficial angiomyxoma (left pinna, left upper cheek, left upper limb, chest, right axilla, hard palate and epidermal cyst (chin. The histopathological specimens were negative to S-100 protein antibody. Systemic review and family history was unremarkable. Excision biopsy and upper lid reconstruction were performed. Intraoperatively the tumor was multilobulated, firm, well encapsulated and did not invade the underlying tarsal plate. Histopathological features of the upperlid tumor were consistent with nerves sheath myxoma (neurothekeoma. To the best of the authors’ knowledge, this is the first reported case of neurothekeoma in association with multiple superficial angiomyxoma.

  15. Neurothekeoma palpebrae in association with multiple superficial angiomyxomas: Tegumental Angiomyxoma-Neurothekeoma syndrome (TAN syndrome).

    Science.gov (United States)

    Kah, Tan Aik; Yong, Ku Chui; Annuar, Faridah Hanom

    2011-07-01

    We report a case of 10-year-old Indian girl with history of multiple superficial angiomyxoma, presented with three months history of painless right upper lid swelling. There were no visual dysfunctions. Previously, the patient had multiple superficial angiomyxoma (left pinna, left upper cheek, left upper limb, chest, right axilla, hard palate) and epidermal cyst (chin). The histopathological specimens were negative to S-100 protein antibody. Systemic review and family history was unremarkable. Excision biopsy and upper lid reconstruction were performed. Intraoperatively the tumor was multilobulated, firm, well encapsulated and did not invade the underlying tarsal plate. Histopathological features of the upperlid tumor were consistent with nerves sheath myxoma (neurothekeoma). To the best of the authors' knowledge, this is the first reported case of neurothekeoma in association with multiple superficial angiomyxoma.

  16. Estudio del comportamiento tribologico y de las interacciones de superficie de nuevos nanofluidos ionicos

    Science.gov (United States)

    Espinosa Rodriguez, Tulia

    hidroxilo y carboxilato con la superficie metalica y los puentes de hidrogeno entre cation y anion podrian ser los responsables del buen comportamiento tribologico. Se ha comparado el comportamiento tribologico de los liquidos ionicos aproticos derivados de imidazolio y tiazolio como lubricantes del contacto acero/zafiro, obteniendose los mejores resultados para los derivados del anion bis(trifluorometanosulfonil)imida, que evita a su vez los procesos de tribocorrosion. Se han generado recubrimientos sobre aleaciones de magnesio con tres liquidos ionicos derivados del anion fosfonato, tanto por inmersion como mediante cronoamperometria. Los nuevos recubrimientos reducen el dano superficial por deslizamiento o abrasion de la aleacion magnesio-aluminio pero no de la aleacion magnesio-cinc, que impide la formacion de recubrimientos continuos.

  17. Is superficial burn caused by ultraviolet radiation (sunburn) comparable to superficial burn caused by heat--a histomorphological comparison by in vivo Reflectance-Mode-Confocal Microscopy.

    Science.gov (United States)

    Altintas, M A; Altintas, A A; Guggenheim, M; Busch, K H; Niederbichler, A D; Aust, M C; Vogt, P M

    2009-12-01

    Regardless of the underlying cause, both sunburn and superficial thermal injuries are classified as first-degree burns, since data on morphological differences are scarce. Reflectance-Mode-Confocal Microscopy (RMCM) enables high-resolution non-invasive investigation of the human skin. We studied in vivo histomorphological alterations in both sunburn and superficial thermal injuries using RMCM. Ten patients (6 female, 4 male; aged 28.4 +/- 10.6 years) with first-degree thermal-contact Injuries (TI group), and 9 sunburned patients (SB group; 7 female, 2 male; aged 30.2 +/- 16.4 years), to a maximum extent of 10% of the body surface were evaluated 24 h after burn injury using RMCM. The following parameters were obtained using RMCM: stratum corneum thickness, epidermal thickness, basal layer thickness, granular cell size. Compared to the controls (12.8 +/- 2.5 microm), stratum corneum thickness decreased significantly to 10.6 +/- 2.1 microm in the TI group, whereas it increased significantly to 16.4 +/- 3.1 microm in the SB group. The epidermal thickness did not differ significantly in the TI group (47.9 +/- 2.3 microm) and SB group (49.1 +/- 3.5 microm); however, both increased significantly compared to their respective controls (41.8 +/- 1.4 microm). The basal layer thickness increased more in the SB group compared to the TI group (17.9 +/- 1.4 microm vs. 15.6 +/- 1.1 microm). Both differed also significantly compared to their controls (13.8 +/- 0.9 microm). The granular cell size increased significantly in both groups compared to the controls (731 +/- 42 microm); however, a significantly higher increase was observed in the TI group (852 +/- 58 microm) compared to the SB group (784 +/- 61 microm). Ultraviolet radiation seems to influence predominantly deeper epidermal layers, whereas heat-induced burns affect more superficial epidermal layers. The term 'First-degree burn' should not be used synonymously for sunburn and superficial thermal burn injuries. Conflicts of

  18. Ultrathin endoscopy versus high-resolution endoscopy for diagnosing superficial gastric neoplasia.

    Science.gov (United States)

    Toyoizumi, Hirobumi; Kaise, Mitsuru; Arakawa, Hiroshi; Yonezawa, Jin; Yoshida, Yukinaga; Kato, Masayuki; Yoshimura, Noboru; Goda, Ken-ichi; Tajiri, Hisao

    2009-08-01

    Ultrathin endoscopy (UTE) is an acceptable and cost-effective alternative to EGD with the patient under sedation, although the diagnostic accuracy of UTE is not well established. To compare the diagnostic accuracy of UTE and high-resolution endoscopy (HRE) for superficial gastric neoplasia. Prospective comparative study. Academic center. Patients with or without superficial gastric neoplasia underwent peroral UTE and HRE, back-to-back in a random order while under standard sedation. The procedures were performed by 2 endoscopists who were blinded to the clinical information. The rate of missed lesions and misdiagnosis, sensitivity, and specificity for the diagnosis of gastric neoplasia when using pathology as the reference standard. In total, 126 lesions (41 superficial gastric neoplasias, 85 nonneoplastic lesions) were recorded in 57 enrolled patients. For the diagnosis of gastric neoplasia, the sensitivity of UTE (58.5%) was significantly (P = .021) lower than that of HRE (78%), and the specificity of UTE (91.8%) was significantly (P = .014) lower than that of HRE (100%). The rate of missed lesions and misdiagnosis of gastric neoplasias when using UTE (41.5%) was significantly (P > .001) higher than that of HRE (22.0%). The corresponding rate of neoplasias at the proximal portion (fornix and corpus) when using UTE (29%) was significantly (P = .002) higher than that of HRE (7.2%), although the rates of neoplasias at the distal portion (angulus and antrum) were comparable for UTE and HRE. Small sample numbers in an enriched population. The diagnostic accuracy of UTE is significantly lower than that of HRE for superficial gastric neoplasia, and this difference is particularly striking for neoplasias in the proximal stomach. For UTE to be used as an alternative modality, improvements in optical quality and the incorporation of additional procedures, including close-range observations and chromoendoscopy, are required to enhance visualization.

  19. Superficial siderosis of the central nervous system | Govind | SA ...

    African Journals Online (AJOL)

    progression of clinical deterioration but halting the chronic subarachoid haemorrhage will reduce the iron load in the CSF and hence the cytotoxic risk. We present a case of superficial siderosis presenting with hearing loss and cerebellar signs highlighting the imaging findings. South African Journal of Radiology Vol.

  20. Síntesis y caracterización de nanoparticulas de CdS obtenidas por microondas

    Directory of Open Access Journals (Sweden)

    Martínez, S.

    2007-04-01

    Full Text Available This paper present the results of the synthesis and characterization of semiconductor nanoparticles of CdS by microwaves. Thioacetamide (TAA and CdCl2 were the initial materials. The synthesis was carried out under controlled potency of 1000W, with 60 seconds on or off, as well as the pH was regulated to different values: 8, 9 and 10. The nanocompounds were analyzed by UV-Vis spectroscopy, Textural Analysis from adsorption isoterms with N2 by BET method, Atomic Force Microscopy and X-Ray Diffraction. Textural analysis shows the size of pore distribution narrow, as well as superficial area of 106.4 m2/g. AFM micrographies shown particle nanometrics, the results of X-Ray Difraction analysis probing the same. Spectras of UV-Vis shown that nanoparticle is less according the pH used in the synthesis, affecting the band gap energy.

    En este trabajo se presentan los resultados de la síntesis de nanoparticulas semiconductoras de CdS por medio de microondas. Se usó Tioacetamida (TAA y CdCl2 para la obtención de las nanoparticulas, se controló térmicamente con microondas a una potencia de 1000W, un tiempo de 60 segundos bajo el ajuste de diferentes valores de pH: 8, 9 y 10. Se caracterizaron los nanocompuestos mediante espectroscopia UV-Vis con reflectancia difusa, Análisis textural a partir de las isotermas de adsorción con N2 usando el método BET, Microscopia de Fuerza Atómica y Difracción de Rayos X en polvos. Los resultados del análisis textural demuestran una distribución de tamaño de poros estrecha, así como área superficial de hasta 106.4 m2/g. Los difractogramos indican la obtención de CdS con tamaños de cristal nanométricos, el cual fue confirmado por el análisis por espectroscopia de UV-Vis así como por fuerza atómica. Las curvas de absorbancia de UV-Vis indicaron una disminución de tamaño de nanopartículas en función del pH utilizado, así como un incremento en la energía de banda prohibida en relación inversa

  1. Gross anatomy of superficial fascia and future localised fat deposit areas of the abdomen in foetus

    Directory of Open Access Journals (Sweden)

    Pramod Kumar

    2013-01-01

    Full Text Available Background: The development and popularity of body contouring procedures such as liposuction and abdominoplasty has renewed interest in the anatomy of the superficial fascia and subcutaneous fat deposits of the abdomen. The study of anatomy of fascia and fetal adipose tissue was proposed as it may be of value in understanding the possible programing of prevention of obesity. Objectives: The present study was undertaken to understand the gross anatomy of superficial fascia of abdomen and to study the gross anatomy of future localized fat deposits (LFDs area of abdomen in fetus. Materials and Methods: Four fetus (two male & two female of four month of intrauterine life were dissected. Attachments & layers of superficial fascia and future subcutaneous fat deposit area of upper and lower abdomen were noted. Results: Superficial fascia of the abdomen was multi layered in mid line and number of layers reduced laterally as in adult. The future abdominal LFD (localized fat deposits area in fetus shows brownish-white blubbary tissue without well-defined adult fat lobules. Conclusion: The attachment and gross anatomy of superficial fascia of the fetus was similar to that in adults. The future LFD areas showed brownish white blubbary tissue with ill-defined fat lobules.

  2. Transdermal drug delivery: feasibility for treatment of superficial bone stress fractures.

    Science.gov (United States)

    Aghazadeh-Habashi, Ali; Yang, Yang; Tang, Kathy; Lőbenberg, Raimar; Doschak, Michael R

    2015-12-01

    Transdermal drug delivery offers the promise of effective drug therapy at selective sites of pathology whilst reducing systemic exposure to the pharmaceutical agents in off-target organs and tissues. However, that strategy is often limited to cells comprising superficial tissues of the body (rarely to deeper bony structures) and mostly indicated with small hydrophobic pharmacological agents, such as steroid hormones and anti-inflammatory gels to skin, muscle, and joints. Nonetheless, advances in transdermal liposomal formulation have rendered the ability to readily incorporate pharmacologically active hydrophilic drug molecules and small peptide biologics into transdermal dosage forms to impart the effective delivery of those bioactive agents across the skin barrier to underlying superficial tissue structures including bone, often enhanced by some form of electrical, chemical, and mechanical facilitation. In the following review, we evaluate transdermal drug delivery systems, with a particular focus on delivering therapeutic agents to treat superficial bone pain, notably stress fractures. We further introduce and discuss several small peptide hormones active in bone (such as calcitonins and parathyroid hormone) that have shown potential for transdermal delivery, often under the added augmentation of transdermal drug delivery systems that employ lipo/hydrophilicity, electric charge, and/or microprojection facilitation across the skin barrier.

  3. Reducing the negative vocal effects of superficial laryngeal dehydration with humidification.

    Science.gov (United States)

    Levendoski, Elizabeth Erickson; Sundarrajan, Anusha; Sivasankar, M Preeti

    2014-07-01

    Environmental humidification is a simple, cost-effective method believed to reduce superficial laryngeal drying. This study sought to validate this belief by investigating whether humidification treatment would reduce the negative effects of superficial laryngeal dehydration on phonation threshold pressure (PTP). Phonation threshold pressure data analysis may be vulnerable to bias because of lack of investigator blinding. Consequently, this study investigated the extent of PTP analysis reliability between unblinded and blinded investigators. Healthy male and female adults were assigned to a vocal fatigue (n = 20) or control group (n = 20) based on their responses to a questionnaire. PTP was assessed after 2 hours of mouth breathing in low humidity (dehydration challenge), following a 5-minute break in ambient humidity, and after 2 hours of mouth breathing in high humidity (humidification). PTP significantly increased following the laryngeal dehydration challenge. After humidification, PTP returned toward baseline. These effects were observed in both subject groups. PTP measurements were highly correlated between the unblinded and blinded investigator. Humidification may be an effective approach to decrease the detrimental voice effects of superficial laryngeal dehydration. These data lay the foundation for future investigations aimed at preventing and treating the negative voice changes associated with chronic, surface laryngeal drying.

  4. Superficial corneal foreign body: laboratory and epidemiologic aspects Corpo estranho corneal superficial: aspectos laboratoriais e epidemiológicos

    Directory of Open Access Journals (Sweden)

    Ednajar Tavares Macedo Filho

    2005-12-01

    Full Text Available PURPOSE: To determine by bacterioscopy and culture the microorganisms carried by corneal foreign body and their sensitivity to antibiotics by antibiotic sensitivity test. METHODS: A prospective study was carried out and information was collected on 101 patients who presented with corneal foreign body at the São Paulo Hospital Eye Emergency Service. Prior to any treatment, a sample of the ipsilateral inferior conjunctival fornix and the foreign body were collected and immersed in thioglycolate broth. Samples were sown on solid culture media including blood, chocolate and Sabouraud agar. Bacterioscopic examination using Gram and Giemsa staining and sensitivity test were performed. Positive foreign body culture results were compared to ipsilateral conjunctival fornix culture to exclude possible normal flora growth. RESULTS: Approximately 92% of patients were males with a mean age of 35 years and in 62.4% (95% confidence interval: 52.2 - 71.8% had the right eye was affected. Foreign body positive cultures were achieved in 32.7% (95% confidence interval: 23.7 - 42.7% of the cases. The microorganisms isolated from the foreign body culture were identified as: Streptococcus, alpha-hemolytic (n=4, Staphylococcus aureus (n=4, Staphylococcus, coagulase-negative (n=4, Corynebacterium xerosis (n=3, unidentified Gram-positive bacillus (n=2, Moraxella sp (n=1, Serratia sp (n=1, Acynetobacter sp (n=1. The microbial sensitivity test showed that 95% of the cases were sensitive to chloramphenicol and 90% were sensitive to ciprofloxacin, these being antibiotics used in our routine service. CONCLUSION: Superficial corneal foreign body acts as important contaminant vector and the great majority of isolated bacteria were sensitive to the antibiotic prophylaxis used in the treatment.OBJETIVOS: Identificar por meio de cultura e bacterioscopia os microrganismos veiculados por corpo estranho corneal e sua sensibilidade aos antibióticos em teste de antibiograma. M

  5. Application techniques of coatings by thermal projection; Tecnicas de aplicacion de recubrimientos por proyeccion termica

    Energy Technology Data Exchange (ETDEWEB)

    Porcayo Calderon, Jesus [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1995-12-31

    The coatings applied by thermal projection have an important number of applications in different industries (chemical, oil, electric, nuclear, etc.). The main purpose of the protection by means of coatings is to alter the surface characteristics of a component so as to resist corrosive environments, abrasion and erosion, among others. The coatings can be applied by different methods, but due to the fact that its characteristics appreciably differ from the base metal, it is important the knowledge of its properties when a coating is selected for a specific use. In this article the characteristics of the applied coatings by thermal projection, the factors that affect its performance and the principal application techniques, are described. [Espanol] Los recubrimientos aplicados por proyeccion termica tienen un numero importante de aplicaciones en diferentes industrias (quimica, petrolera, electrica, nuclear, etc.). El proposito principal de la proteccion por medio de recubrimientos es alterar las caracteristicas de la superficie de un componente de manera que resista ambientes corrosivos, abrasion y erosion, entre otros. Los recubrimientos pueden aplicarse por diferentes metodos, pero debido a que sus propiedades difieren apreciablemente de las del metal base, es importante el conocimiento de sus propiedades cuando se selecciona un recubrimiento para un uso especifico. En este articulo se describen las caracteristicas de los recubrimientos aplicados por proyeccion termica, los factores que afectan su desempeno y las principales tecnicas de aplicacion.

  6. Application techniques of coatings by thermal projection; Tecnicas de aplicacion de recubrimientos por proyeccion termica

    Energy Technology Data Exchange (ETDEWEB)

    Porcayo Calderon, Jesus [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    The coatings applied by thermal projection have an important number of applications in different industries (chemical, oil, electric, nuclear, etc.). The main purpose of the protection by means of coatings is to alter the surface characteristics of a component so as to resist corrosive environments, abrasion and erosion, among others. The coatings can be applied by different methods, but due to the fact that its characteristics appreciably differ from the base metal, it is important the knowledge of its properties when a coating is selected for a specific use. In this article the characteristics of the applied coatings by thermal projection, the factors that affect its performance and the principal application techniques, are described. [Espanol] Los recubrimientos aplicados por proyeccion termica tienen un numero importante de aplicaciones en diferentes industrias (quimica, petrolera, electrica, nuclear, etc.). El proposito principal de la proteccion por medio de recubrimientos es alterar las caracteristicas de la superficie de un componente de manera que resista ambientes corrosivos, abrasion y erosion, entre otros. Los recubrimientos pueden aplicarse por diferentes metodos, pero debido a que sus propiedades difieren apreciablemente de las del metal base, es importante el conocimiento de sus propiedades cuando se selecciona un recubrimiento para un uso especifico. En este articulo se describen las caracteristicas de los recubrimientos aplicados por proyeccion termica, los factores que afectan su desempeno y las principales tecnicas de aplicacion.

  7. Tratamento do aneurisma aterosclerótico da artéria temporal superficial: relato de caso

    Directory of Open Access Journals (Sweden)

    Paula Dayana Matkovski

    2015-09-01

    Full Text Available ResumoAneurismas da artéria temporal superficial são incomuns segundo a literatura. A grande maioria é secundária a traumatismos ou cirurgia na região temporal, sendo que 95% dos casos evoluem para pseudoaneurismas. Entretanto, os aneurismas verdadeiros ou espontâneos são extremamente raros e representam 8% dos casos de aneurismas da artéria temporal superficial, sendo estes, geralmente, de origem aterosclerótica. Aneurismas temporais espontâneos podem coexistir com outras lesões vasculares, incluindo aneurismas intracranianos. Nosso relato trata de um paciente com aneurisma de artéria temporal superficial esquerda, de origem aterosclerótica, no qual foi realizada a excisão cirúrgica, sob anestesia geral.

  8. Risk factors associated with acquiring superficial fungal infections in ...

    African Journals Online (AJOL)

    extensively documented. It is therefore imperative to identify the factors that predispose to the development of SFI so as to provide evidence-based and effective pre- ventive measures, thus reducing the prevalence and the attendant morbidity associated with superficial fungal in- fections and this was our aim in this present ...

  9. Honey compared with silver sulphadiazine in the treatment of superficial partial-thickness burns.

    Science.gov (United States)

    Malik, Kamran Ishaque; Malik, M A Nasir; Aslam, Azhar

    2010-10-01

    Burn injury is associated with a high incidence of death and disability; yet, its management remains problematic and costly. We conducted this clinical study to evaluate the efficacy of honey in the treatment of superficial and partial-thickness burns covering less than 40% of body surface area and compared its results with those of silver sulphadiazine (SSD). In this randomised comparative clinical trial, carried out Burn Center of POF Hospital, Wah Cantt, Pakistan, from May 2007 to February 2008, 150 patients of all ages having similar types of superficial and partial-thickness burns at two sites on different parts of body were included. Each patient had one burn site treated with honey and one treated with topical SSD, randomly. The rate of re-epithelialization and healing of superficial and partial-thickness burns was significantly faster in the sites treated with honey than in the sites treated with SSD (13·47 ± 4·06 versus 15·62 ± 4·40 days, respectively: P honey healed completely in less than 21 days versus 24 days for the site treated with SSD. Six patients had positive culture for Pseudomonas aeroginsa in honey-treated site, whereas 27 patients had positive culture in SSD-treated site. The results clearly showed greater efficacy of honey over SSD cream for treating superficial and partial-thickness burns. 2010 The Authors. Journal Compilation © 2010 Blackwell Publishing Ltd and Medicalhelplines.com Inc.

  10. Removal of dissolved organic carbon in pilot wetlands of subsuperficial and superficial flows

    Directory of Open Access Journals (Sweden)

    Ruth M. Agudelo C

    2010-04-01

    Full Text Available Objective: to compare removal of dissolved organic carbon (d o c obtained with pilot wetlands of subsuperficial flow (p h s s and superficial flow (p h s, with Phragmites australis as treatment alternatives for domestic residual waters of small communities and rural areas. Methodology: an exploratory and experimental study was carried out adding 100,12 mg/L of dissolved organic carbon to synthetic water contaminated with Chlorpyrifos in order to feed the wetlands. A total amount of 20 samples were done, 16 of them in four experiments and the other ones in the intervals with no use of pesticides. Samples were taken on days 1, 4, 8, and 11 in the six wetlands, three of them subsuperficial, and three of them superficial. The main variable answer was dissolved organic carbon, measured in the organic carbon analyzer. Results: a high efficiency in the removal of d o c was obtained with the two types of wetlands: 92,3% with subsuperficial flow and 95,6% with superficial flow. Such a high removal was due to the interaction between plants, gravel and microorganisms. Conclusion: although in both types of wetlands the removal was high and similar, it is recommended to use those of subsuperficial flow because in the superficial ones algae and gelatinous bio-films are developed, which becomes favorable to the development of important epidemiologic vectors in terms of public health.

  11. Superficial femoral artery: current treatment options

    International Nuclear Information System (INIS)

    Tepe, Gunnar; Schmehl, Joerg; Heller, Stephan; Wiesinger, Benjamin; Claussen, Claus D.; Duda, Stephan H.

    2006-01-01

    Treatment of the superficial femoral artery (SFA) has been among the least effective of all endovascular procedures in terms of long-term patency. The relatively small vessel lumen, in conjunction with a high plaque burden, slow flow, and a high frequency of primary occlusions, contributes to a considerable rate of acute technical failures. Because of these technical limitations a much effort has been made during the past years. This manuscript should summarize the hopes and limitations of different approaches such as brachytherapy, cutting balloons, stents and stent grafts, drug-eluting stents, and drug-coated balloons. (orig.)

  12. Variação de temperatura do músculo quadríceps femoral exposto a duas modalidades de crioterapia por meio de termografia

    Directory of Open Access Journals (Sweden)

    Alberito Rodrigo de Carvalho

    2012-04-01

    Full Text Available INTRODUÇÃO: Crioterapia é qualquer forma de aplicação terapêutica de frio que leva à diminuição da temperatura dos tecidos. OBJETIVO: Comparar as variações na temperatura superficial do músculo quadríceps femoral, em três momentos distintos, quando expostos a duas modalidades de crioterapia: sacos com gelo ou sacos contendo mistura de gelo e água. MATERIAIS E MÉTODOS: Participaram do estudo 18 indivíduos, com idade entre 18 e 25 anos, de ambos os sexos. Em cada voluntário foi realizada, simultaneamente, crioterapia com gelo na coxa esquerda e mistura de gelo e água na coxa direita, durante 15 minutos na região do quadríceps femoral. A temperatura superficial foi mensurada por um termógrafo e foram feitos registros nos seguintes momentos: pré-crioterapia, imediatamente e 15 e 30 minutos após a retirada da modalidade de crioterapia. RESULTADOS: Ambas as modalidades de crioterapia foram eficientes para diminuir a temperatura do quadríceps femoral e a mistura de gelo e água foi capaz de induzir a uma temperatura mais baixa em relação àquela modalidade que usou somente gelo. O resfriamento, para ambas as modalidades, perdurou por, pelo menos, 15 minutos após a retirada do gelo e a temperatura superficial já estava restaurada ao nível pré-aplicação aos 30 minutos após a retirada. CONCLUSÃO: Ambas as modalidades promoveram redução da temperatura que perdurou, pelo menos, durante 15 minutos; e após 30 minutos da retirada das modalidades a temperatura foi restabelecida aos níveis normais. Contudo, a mistura de gelo e água produziu resfriamento maior do que a modalidade de gelo sozinho.

  13. Flow Perturbation Mediates Neutrophil Recruitment and Potentiates Endothelial Injury via TLR2 in Mice: Implications for Superficial Erosion.

    Science.gov (United States)

    Franck, Grégory; Mawson, Thomas; Sausen, Grasiele; Salinas, Manuel; Masson, Gustavo Santos; Cole, Andrew; Beltrami-Moreira, Marina; Chatzizisis, Yiannis; Quillard, Thibault; Tesmenitsky, Yevgenia; Shvartz, Eugenia; Sukhova, Galina K; Swirski, Filip K; Nahrendorf, Matthias; Aikawa, Elena; Croce, Kevin J; Libby, Peter

    2017-06-23

    Superficial erosion currently causes up to a third of acute coronary syndromes; yet, we lack understanding of its mechanisms. Thrombi because of superficial intimal erosion characteristically complicate matrix-rich atheromata in regions of flow perturbation. This study tested in vivo the involvement of disturbed flow and of neutrophils, hyaluronan, and Toll-like receptor 2 ligation in superficial intimal injury, a process implicated in superficial erosion. In mouse carotid arteries with established intimal lesions tailored to resemble the substrate of human eroded plaques, acute flow perturbation promoted downstream endothelial cell activation, neutrophil accumulation, endothelial cell death and desquamation, and mural thrombosis. Neutrophil loss-of-function limited these findings. Toll-like receptor 2 agonism activated luminal endothelial cells, and deficiency of this innate immune receptor decreased intimal neutrophil adherence in regions of local flow disturbance, reducing endothelial cell injury and local thrombosis ( P <0.05). These results implicate flow disturbance, neutrophils, and Toll-like receptor 2 signaling as mechanisms that contribute to superficial erosion, a cause of acute coronary syndrome of likely growing importance in the statin era. © 2017 American Heart Association, Inc.

  14. Dinâmica da água e do nitrogênio em áreas variáveis de afluência: um estudo de caso em uma microbacia coberta predominantemente por cana-de-açúcar

    OpenAIRE

    Luiz Felippe Salemi

    2014-01-01

    O nitrogênio (N) é um nutriente limitante à produtividade na maioria dos agroecossistemas. Contudo, seu uso indiscriminado provoca alterações subtanciais no funcionamento e estrutura dos ecossistemas terrestres e aquáticos, sendo a eutrofização apenas uma dessas consequências. O N dos ecossistemas terrestres atinge os rios, por meio do escoamento superficial (ES), entre outras vias hidrológicas. O ES pode ocorrer por duas possíveis razões: (i) intensidade de chuva excede a capacidade de infil...

  15. Comportamiento a la Corrosión del Acero API X70 Soldado por el Proceso de Doble Arco Sumergido Inmerso en Diferentes Medios Corrosivos

    Directory of Open Access Journals (Sweden)

    Omar Francisco Montes

    Full Text Available Resumen Los aceros API X70 son aplicados en fabricación y construcción de tuberías para el transporte de hidrocarburos, sin embargo, a un lapso de tiempo se degradan debido al medio ambiente al cual están expuestos; influyendo en la velocidad y tipo de corrosión sobre las superficies del metal base (MB, zona afectada por el calor (ZAC y zona de fusión (ZF. A fin de conocer y evaluar la susceptibilidad a la corrosión en uniones del acero API X70 sometido a diferentes medios corrosivos, varias pruebas se llevaron a cabo por el proceso de soldadura de doble arco sumergido (DSAW, por sus siglas en inglés, las cuales fueron inmersas en diferentes electrolitos: Cloruro de Sodio (NaCl al 3,5% y Agua (H2O a temperatura ambiente para conocer su comportamiento. Se utilizaron técnicas electroquímicas de ruido electroquímico (RE y curvas de polarización cíclica (CPC para obtener velocidad y tipo de corrosión producida en cada una de las muestras analizadas, incluyendo las tres zonas: MB, ZAC y ZF. Además, se utilizaron técnicas de caracterización como microscopía óptica (MO y microscopía electrónica de barrido (MEB para el análisis superficial. La mayoría de las soldaduras presentan corrosión mixta, con mayores velocidades de corrosión en 3,5% de NaCl.

  16. Prevalence and causative agents of superficial mycoses in a textile factory in Adana, Turkey.

    Science.gov (United States)

    Celik, E; Ilkit, M; Tanir, F

    2003-09-01

    This study was carried out in a textile factory settled in the city center of Adana, Turkey. The workers were evaluated for the presence of superficial mycoses and the interaction of their working environment or working condition. A total of 431 textile workers were included in the study, with a male to female ratio of 378 (87.7%) to 53 (12.3%) and an age range of 19-52 (mean: 33.7 +/- 6.8). Direct examination and/or culture revealed superficial mycoses in 73 (16.9%) workers, among them 56 (76.7%) were classified as dermatophytoses, 8 (11.0%) as Pityriasis versicolor while in nine (12.3%) of the cases, no causative agent could be determined. Trichophyton rubrum (57.1%) and T. mentagrophytes (42.9%) were the two species isolated on culture. This study emphasized that textile workers should be admitted as a risk group for superficial mycoses, especially tinea pedis.

  17. A Novel Technique of Supra Superficial Musculoaponeurotic System Hyaluronic Acid Injection for Lower Face Lifting

    OpenAIRE

    Sahawatwong, Sinijchaya; Sirithanabadeekul, Punyaphat; Patanajareet, Vasiyapha; Wattanakrai, Penpun; Thanasarnaksorn, Wilai

    2016-01-01

    Background: Various methods attempting to correct sagging of the lower face focus mainly on manipulation of the superficial musculoaponeurotic System. Each technique has its own limitation. The authors propose a relatively simple, conservative method utilizing hyaluronic acid injection just above the superficial musculoaponeurotic System. Objective: To address a novel hyaluronic injection technique to lift the lower face. Methods: Details of the injection techniques are described. The Positio...

  18. High dose rate brachytherapy for superficial cancer of the esophagus

    International Nuclear Information System (INIS)

    Maingon, Philippe; D'Hombres, Anne; Truc, Gilles; Barillot, Isabelle; Michiels, Christophe; Bedenne, Laurent; Horiot, Jean Claude

    2000-01-01

    Purpose: We analyzed our experience with external radiotherapy, combined modality treatment, or HDR brachytherapy alone to limited esophageal cancers. Methods and Materials: From 1991 to 1996, 25 patients with limited superficial esophagus carcinomas were treated by high dose rate brachytherapy. The mean age was 63 years (43-86 years). Five patients showed superficial local recurrence after external radiotherapy. Eleven patients without invasion of the basal membrane were staged as Tis. Fourteen patients with tumors involving the submucosa without spreading to the muscle were staged as T1. Treatment consisted of HDR brachytherapy alone in 13 patients, external radiotherapy and brachytherapy in 8 cases, and concomitant chemo- and radiotherapy in 4 cases. External beam radiation was administered to a total dose of 50 Gy using 2 Gy daily fractions in 5 weeks. In cases of HDR brachytherapy alone (13 patients), 6 applications were performed once a week. Results: The mean follow-up is 31 months (range 24-96 months). Twelve patients received 2 applications and 13 patients received 6 applications. Twelve patients experienced a failure (48%), 11/12 located in the esophagus, all of them in the treated volume. One patient presented an isolated distant metastasis. In the patients treated for superficial recurrence, 4/5 were locally controlled (80%) by brachytherapy alone. After brachytherapy alone, 8/13 patients were controlled (61%). The mean disease-free survival is 14 months (1-36 months). Overall survival is 76% at 1 year, 37% at 2 years, and 14% at 3 years. Overall survival for Tis patients is 24% vs. 20% for T1 (p 0.83). Overall survival for patients treated by HDR brachytherapy alone is 43%. One patient presented with a fistula with local failure after external radiotherapy and brachytherapy. Four stenosis were registered, two were diagnosed on barium swallowing without symptoms, and two required dilatations. Conclusion: High dose rate brachytherapy permits the treating

  19. El Legado de Albert Schweitzer - RESUMEN DE VOCABULARIO DE LA SENSIBILIDAD PROFUNDA Y SUPERFICIAL

    Directory of Open Access Journals (Sweden)

    Alberto Cardenas Escovar

    1990-08-01

    familiares y sus amigos. Veamos lo que dice él mismo en su autobiografía sobre esta drástica decisión: ” … El plan que ahora había resuelto ejecutar había sido contemplado por largo tiempo, desde mis días de estudiante, cuando comenzó a golpearme el hecho, para mí incomprensible, del contraste entre mi vida feliz Y los sufrimientos y angustias de tanta gente a mi alrededor. Incluso en la escuela, me habían conmovido las condiciones de vida de algunos de mis compañeros, que yo comparaba con las de óptimo bienestar en que vivíamos en la casa parroquial de GÜnsbach”. ” … Me vino entonces la idea de que yo no debía aceptar esta felicidad sin dar algo a cambio de ella”.

    Según sus propias palabras, fue sólo gracias a su excelente salud como pudo sobrellevar el trabajo agobiador durante sus años de estudios médicos, pues continuó las obras literarias y las giras de conciertos, de todo lo cual derivaba los ingresos necesarios para su propia subsistencia y para la adquisición gradual de los equipos hospitalarios requeridos por el proyecto que ya había concebido. En todas estas tareas contó con el apoyo de su esposa Helen Breslaw, hija del famoso historiador de Estrasburgo, y con quien se había casado en 1912.

    Lo que vino a concretar sus planes fue la lectura de un aviso en el Journal des Missions Evangéliques sobre las calamitosas condiciones de salud en la Misión del Congo. De inmediato solicitó y obtuvo el permiso para fundar un hospital en Lambaréné, Africa Ecuatorial Francesa, para la atención de los enfermos y los necesitados. En esta presentación sería imposible dar cuenta de los esfuerzos, las dificultades y el ulterior éxito de tal empresa humanitaria...

    RESUMEN DE VOCABULARIO DE LA SENSIBILIDAD PROFUNDA Y SUPERFICIAL

    I. Consideraciones Neurológicas

    La sensibilidad se divide en superficial o protopática y profunda que puede ser consciente o inconsciente

  20. Superficial skin infections and the use of topical and systemic ...

    African Journals Online (AJOL)

    Superficial bacterial infections of the skin are very common. With the increasing burden of human immunodeficiency virus (HIV), this is likely to worsen. Examples of such infections include impetigo, erysipelas, cellulitis, ecthyma, furuncles, carbuncles and subcutaneous abscesses. Common causative organisms are ...

  1. Evaluation of anatomy and variations of superficial palmar arch and upper extremity arteries with CT angiography.

    Science.gov (United States)

    Kaplanoglu, Hatice; Beton, Osman

    2017-04-01

    To evaluate the abnormalities and variations of the arterial system of upper extremities and superficial palmar arch with computed tomography angiography and to guide the clinician during this procedure. A total of 156 upper extremities of 78 cases were retrospectively analyzed using computed tomography angiography. The study was approved by the local ethics committee of the hospital. From the analysis of the computed tomography angiography images, the following information was recorded; the diameters and abnormalities of radial, ulnar and brachial arteries in both upper extremities, the presence of atherosclerotic changes or stenosis in these arteries, whether the superficial palmar arch was complete or incomplete, and arterial dominance. Also, the computed tomography angiography classification of superficial palmar arch distribution and anatomic configuration was performed. The mean baseline diameters of the radial, ulnar and brachial arteries of the cases were; 2.8 ± 0.6, 2.5 ± 0.7, and 4.7 ± 0.6 mm, respectively. A complete superficial palmar arch was observed in 69.2 % of the right hands and 70.5 % of the left hands. For the superficial palmar arches on the right side, the radial artery was dominant in two and the ulnar artery was dominant in 47 with the remaining showing codominance. On the left side, the radial artery was dominant in one hand, with the ulnar artery being dominant in 49 cases, and in 28 cases, there was codominance. In the superficial palmar arch classification, four of the arches (A-D) were defined as complete and the remaining three (E-G) as incomplete. The current study clarified different variations in palmar circulation and forearm arteries to aid the surgeon during trans-radial or trans-ulnar catheterization, hemodialysis, or coronary artery bypass grafting.

  2. Recanalization of superficial femoral artery by retrograde approach via popliteal artery

    International Nuclear Information System (INIS)

    Kim, Jae Kyu; Kim, Hyung Kil; Yun, Ung; Seo, Jeong Jin; Kang, Heoung Keun

    1995-01-01

    To recanalize the occlusive lesion of superficial femoral artery at origin site by retrograde approach via popliteal artery. 15 patients, who were poor surgical candidates due to coronary artery disease and who had severe occlusive lesion of superficial femoral artery close to its origin with good distal runoffs to popliteal artery, were selected. Patients were all men and range of age were from 53 years to 66 years (mean age: 63 years). Range of lesion length were from 15 cm to 30 cm (mean length: 22.4 cm). Localization of popliteal artery was done with Doppler stethoscope or 'road-map' DSA. The method of recanalization were transluminal endarterectomy catheter (TEC), TEC and angioplasty, thrombolysoangioplasty (TLA). Retrograde puncture of popliteal artery was done in 15 patients successfully. TEC and PTA was performed in 9 patients, TEC only in 2 patients, and TLA and PTA in 2 patients. During the follow-up period of 5 months to 2 years reocclusion did not occur in 10 patients except for 1 patient with poor cardiac output in whom it occurred 1 day later. Remained 4 patients were lost in follow up. Any neurologic or vascular complication did not occur. Retrograde approach of superficial femoral artery via popliteal artery in patients with difficult vascular intervention by common method provides a useful, alternative recanalization method

  3. Recanalization of superficial femoral artery by retrograde approach via popliteal artery

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Kyu; Kim, Hyung Kil; Yun, Ung; Seo, Jeong Jin; Kang, Heoung Keun [Chonnam University Medical School, Kwangju (Korea, Republic of)

    1995-09-15

    To recanalize the occlusive lesion of superficial femoral artery at origin site by retrograde approach via popliteal artery. 15 patients, who were poor surgical candidates due to coronary artery disease and who had severe occlusive lesion of superficial femoral artery close to its origin with good distal runoffs to popliteal artery, were selected. Patients were all men and range of age were from 53 years to 66 years (mean age: 63 years). Range of lesion length were from 15 cm to 30 cm (mean length: 22.4 cm). Localization of popliteal artery was done with Doppler stethoscope or 'road-map' DSA. The method of recanalization were transluminal endarterectomy catheter (TEC), TEC and angioplasty, thrombolysoangioplasty (TLA). Retrograde puncture of popliteal artery was done in 15 patients successfully. TEC and PTA was performed in 9 patients, TEC only in 2 patients, and TLA and PTA in 2 patients. During the follow-up period of 5 months to 2 years reocclusion did not occur in 10 patients except for 1 patient with poor cardiac output in whom it occurred 1 day later. Remained 4 patients were lost in follow up. Any neurologic or vascular complication did not occur. Retrograde approach of superficial femoral artery via popliteal artery in patients with difficult vascular intervention by common method provides a useful, alternative recanalization method.

  4. Avaliação da influência do infravermelho e da diatermia por microondas associados ao alongamento passivo no encurtamento dos músculos isquiotibiais - doi:10.5102/ucs.v5i1.416

    Directory of Open Access Journals (Sweden)

    Aline Simões Alencastro

    2008-11-01

    Full Text Available A diatermia por microondas é uma modalidade de aquecimento profundo, e a radiação infravermelha aquece praticamente a epiderme. Em algumas práticas clínicas, para se obter um maior ganho da flexibilidade usam-se técnicas de alongamento associadas ao calor. Este estudo teve como objetivo verificar a influência e as diferenças na utilização dos recursos térmicos de calor profundo e superficial na flexibilidade da musculatura isquiotibial. Dezenove estudantes do Curso de Fisioterapia do Centro Universitário de Brasília foram distribuídos de forma aleatória em três grupos distintos: GC (alongamento muscular passivo, GCS (infravermelho associado ao alongamento passivo e GCP (diatermia por microondas associada ao alongamento. Os resultados foram obtidos através da analise do ângulo poplíteo antes e depois de cada intervenção, relacionando o recurso com o alongamento. Concluiu-se que a aplicação da termoterapia profunda ou superficial auxilia no alongamento da musculatura isquiotibial

  5. Modelo Pre-Proceso de predicción de la Calidad Superficial en Fresado a Alta Velocidad basado en Softcomputing

    Directory of Open Access Journals (Sweden)

    Víctor M. Flores

    2011-01-01

    Full Text Available Resumen: La calidad superficial es uno de los aspectos más cuidados en la fabricación de piezas. Esta calidad se estima frecuentemente en función a la rugosidad superficial. Trabajos que incorporan técnicas de softcomputing al estudio de la rugosidad superficial en-proceso o pos-proceso son relativamente frecuentes en la literatura. Sin embargo, son casi inexistentes los dedicados al estudio de la rugosidad superficial en pre-proceso, pese a que esto puede ayudar a reducir costes asociados al aseguramiento de la calidad superficial en la producción industrial. En este trabajo se presenta una técnica softcomputing para generar un modelo pre-proceso predictivo de la rugosidad superficial basado en experimentación con características diversas del proceso de fresado a alta velocidad. El modelo de predicción es un clasificador Bayesiano, validado con el método k-fold cross-validation y varios valores de mérito, lo que ha permitido verificar la calidad del modelo predictivo respecto a otros modelos basados en técnicas similares. Palabras clave: Mecanizado a alta velocidad, proceso de fresado a alta velocidad, softcomputing, redes Bayesianas, modelos predictivos

  6. Optical coherence tomography and polarimetry of superficial skin biopsies

    Directory of Open Access Journals (Sweden)

    S. R. Utz

    2015-01-01

    Full Text Available The goal. Of this study was to develop and assess the efficacy of polarization probing of biotissues in vitro. The method is based on the determination of polarization parameters of scattered radiation. Materials and methods. The well-known superficial epidermis stripping method was applied using the Sulfacrylate self-sterile medical adhesive. Small portions of thin layers of the adhesive were applied to slide plates and then to different skin sites. The corneous layer in the normal condition and in case of skin diseases (psoriasis, lichen acuminatus, discoid lupus erythematosus, alopecia, itching and demodectic mange was examined based on the optical coherence tomography (OCT method using the 0CS1300SS device (Thorlabs Inc, USA. Results. The authors obtained pictures visualizing the structural organization of different layers of the epidermis using the superficial epidermis biopsy method in case of lichen acuminatus, hyperkeratosis, itching and other skin diseases. Conclusion. This method ensures non-invasive high-precision measurement of the structure of different layers of the epidermis, which may be useful both for research purposes and practical dermatology.

  7. Superficial tension: experimental model with simple materials

    Directory of Open Access Journals (Sweden)

    Tintori Ferreira, María Alejandra

    2012-09-01

    Full Text Available In this work appears a didactic offer based on an experimental activity using materials of very low cost, orientated to achieving that the student understand and interpret the phenomenon of superficial tension together with the importance of the modeling in sciences. It has as principal aim of education bring the student over to the mechanics of the static fluids and the intermolecular forces, combining scientific contents with questions near to the student what provides an additional motivation to the reflection of the scientific investigation.

  8. Superficially located enlarged lymphoid follicles characterise nodular gastritis.

    Science.gov (United States)

    Okamura, Takuma; Sakai, Yasuhiro; Hoshino, Hitomi; Iwaya, Yugo; Tanaka, Eiji; Kobayashi, Motohiro

    2015-01-01

    Nodular gastritis is a form of chronic Helicobacter pylori gastritis affecting the gastric antrum and characterised endoscopically by the presence of small nodular lesions resembling gooseflesh. It is generally accepted that hyperplasia of lymphoid follicles histologically characterises nodular gastritis; however, quantitative analysis in support of this hypothesis has not been reported. Our goal was to determine whether nodular gastritis is characterised by lymphoid follicle hyperplasia.The number, size, and location of lymphoid follicles in nodular gastritis were determined and those properties compared to samples of atrophic gastritis. The percentages of high endothelial venule (HEV)-like vessels were also evaluated.The number of lymphoid follicles was comparable between nodular and atrophic gastritis; however, follicle size in nodular gastritis was significantly greater than that seen in atrophic gastritis. Moreover, lymphoid follicles in nodular gastritis were positioned more superficially than were those in atrophic gastritis. The percentage of MECA-79 HEV-like vessels was greater in areas with gooseflesh-like lesions in nodular versus atrophic gastritis.Superficially located hyperplastic lymphoid follicles characterise nodular gastritis, and these follicles correspond to gooseflesh-like nodular lesions observed endoscopically. These observations suggest that MECA-79 HEV-like vessels could play at least a partial role in the pathogenesis of nodular gastritis.

  9. Superficial corneal crosslinking during laser in situ keratomileusis.

    Science.gov (United States)

    Seiler, Theo G; Fischinger, Isaak; Koller, Tobias; Derhartunian, Viktor; Seiler, Theo

    2015-10-01

    To determine the safety of superficial corneal crosslinking after laser in situ keratomileusis (LASIK). Institut für Refraktive und Ophthalmo-Chirurgie, Zurich, Switzerland. Prospective study. Eyes with an ectasia risk score of 2 or higher were treated with standard LASIK (90 μm flap) for myopia correction, after which a rapid corneal crosslinking was performed in the interface (riboflavin 0.5% for 2 minutes, 9 mW/cm(2) for 5 minutes) (Group 1). The follow-up was up to 1 year. The prevalence of complications was statistically compared with that in a group of eyes matched regarding age, sex, and attempted refractive correction that were treated with standard LASIK only (Group 2). One month postoperatively, 5 eyes in Group 1 lost 1 line of corrected distance visual acuity (CDVA) compared with 1 eye in Group 2 (P rate of less than 5%. The refractive success was identical in both groups. Early postoperative complications such as erosions (16%), diffuse lamellar keratitis (DLK) stage 1 (38%), and DLK stage 2 (5%) were statistically significantly more frequent after superficial corneal crosslinking, leading to a statistically significantly reduced uncorrected distance visual acuity at 1 month (P interest in any material or method mentioned. Copyright © 2015 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

  10. Can sparing of the superficial contralateral parotid lobe reduce xerostomia following radiotherapy for head and neck cancer?

    Science.gov (United States)

    Nevens, Daan; Nuyts, Sandra

    2017-12-01

    The purpose of this study is to see whether sparing the superficial contralateral parotid lobe can help limiting xerostomia following radiotherapy for head and neck cancer. 88 patients that were included in two prospective randomized studies were analysed in the current study. Using the dosimetry of both the parotid glands, we divided our patients in four groups. Group 1 includes patients where we were able to reduce the radiation dose below the threshold in order to spare both the ipsilateral and contralateral parotid glands, Group 2 consists of patients where only the contralateral parotid gland could be spared. Group 3 consists of patients where only the contralateral superficial parotid lobe could be spared, while in Group 4 not even the contralateral superficial lobe could be spared. When we compared Group 1 and Group 2, we did not observe a significant difference between both groups in terms of xerostomia scores at 6 or 12 months. When we compared these groups with Group 3, we observed significant differences with more xerostomia in Group 3 where only the contralateral superficial lobe was spared. A significant difference was also observed between Group 3 and Group 4 with more xerostomia in Group 4. Sparing of just one superficial parotid lobe results in less xerostomia when compared to not sparing any lobe of both parotid glands. Advances in knowledge: When sparing of the whole contralateral parotid gland is not possible, delineating both the superficial parotid glands and trying to spare at least one of them can mean a way forward in limiting xerostomia in head and neck cancer patients treated with radiotherapy.

  11. Investigation of Superficial Resistance of Different Purity Copper at Boiling Nitrogen Temperature Depending on Treatment of Current-Conducting Layer

    International Nuclear Information System (INIS)

    Kutovoj, V.A.; Nikolaenko, A.A.; Stoev, P.I.

    2007-01-01

    Results of this scientific work show influence of annealing temperature and deformation degree of initial MOB copper and after electron beam refining on superficial resistance at temperature of boiling nitrogen. It is shown, that 30 % deformation and annealing in 873...923 K temperature range results in appreciable reduction of superficial resistance at the investigated samples of copper. The lowest values of superficial resistance after thermal and mechanical treatment were observed in the samples after electron beam refinement

  12. Outcome of superficial squamous cell carcinoma of the esophagus: a clinicopathological study

    Directory of Open Access Journals (Sweden)

    Maria Aparecida Coelho de Arruda Henry

    2013-05-01

    Full Text Available PURPOSE: To analyze the clinicopathological features and outcome of patients with pathologically proven superficial squamous cell carcinoma of the esophagus. METHODS: A total of 234 consecutive cases of esophageal carcinoma in a 15-year period were reviewed. RESULTS: Superficial esophageal cancer was found in five patients (2.1%. They were four men and one woman and the mean age was 52.5 years. Smoking and alcohol were the main risk factors. Achalasia due to Chagas disease occurred in one patient and a second primary tumor developed in the larynx in another patient. Four patients underwent esophagectomy and one patient received chemoradiotherapy. The histopathologic diagnosis was of squamous cell carcinoma in all cases. Intramucosal tumor (Tis was identified in three cases and superficially invasive carcinoma in two cases. Four patients are free of disease with survival times of two, four, six and nine years. The patient who developed laryngeal cancer died six years after esophagectomy. CONCLUSION: Long-term survival in patients with esophageal cancer is related to early diagnosis. Therefore, a less aggressive surgical approach, such as endoscopic resection, may be a good option for these patients, if depth of tumor invasion can be accurately predicted by the new imaging tools.

  13. Harvest Date Influences Superficial Scald Development in Granny Smith Apples During Long Term Storage

    OpenAIRE

    ERKAN, Mustafa; PEKMEZCİ, Mustafa

    2014-01-01

    The effects of harvest dates on superficial scald development and postharvest quality in 'Granny Smith' apples (Malus domestica Borkh.) were investigated. Apples were harvested at 15-day intervals during 2 consecutive years (2000-2001) and stored at 0 °C with 90% relative humidity for 8 months. At the end of the 8 - month storage period plus an additional 1 week at 20 °C the percentage of superficial scald was lower (24.4%) in late harvested (November 15) apples than in ap...

  14. Flow Perturbation Mediates Neutrophil Recruitment and Potentiates Endothelial Injury via TLR2 in Mice – Implications for Superficial Erosion

    Science.gov (United States)

    Franck, Grégory; Mawson, Thomas; Sausen, Grasiele; Salinas, Manuel; Masson, Gustavo Santos; Cole, Andrew; Beltrami-Moreira, Marina; Chatzizisis, Yiannis; Quillard, Thibault; Tesmenitsky, Yevgenia; Shvartz, Eugenia; Sukhova, Galina K.; Swirski, Filip K.; Nahrendorf, Matthias; Aikawa, Elena; Croce, Kevin J.; Libby, Peter

    2017-01-01

    Rationale Superficial erosion currently causes up to a third of acute coronary syndromes (ACS), yet we lack understanding of its mechanisms. Thrombi due to superficial intimal erosion characteristically complicate matrix-rich atheromata in regions of flow perturbation. Objective This study tested in vivo the involvement of disturbed flow, and of neutrophils, hyaluronan, and TLR2 ligation in superficial intimal injury, a process implicated in superficial erosion. Methods and Results : In mouse carotid arteries with established intimal lesions tailored to resemble the substrate of human eroded plaques, acute flow perturbation promoted downstream endothelial cell (EC) activation, neutrophil accumulation, EC death and desquamation, and mural thrombosis. Neutrophil loss-of-function limited these findings. TLR2 agonism activated luminal ECs, and deficiency of this innate immune receptor decreased intimal neutrophil adherence in regions of local flow disturbance, reducing EC injury and local thrombosis (p<0.05). Conclusions These results implicate flow disturbance, neutrophils, and TLR2 signaling as mechanisms that contribute to superficial erosion, a cause of ACS of likely growing importance in the statin era. PMID:28428204

  15. Paralisia do nervo ulnar na lepra sem alterações cutâneas: biópsia do ramo superficial do nervo ulnar na mão

    Directory of Open Access Journals (Sweden)

    FREITAS MARCOS R. G. DE

    1998-01-01

    Full Text Available A lepra constitui causa frequente de acometimento de nervos periféricos, em nosso meio. O sistema nervoso periférico é acometido por vezes sem que haja alterações cutâneas: é a chamada forma neurítica pura. Nessa variante, o nervo mais afetado é o ulnar. Nos casos de acometimento isolado de nervos periféricos somente a feitura de biópsia de nervo conduzirá ao diagnóstico. Assim, resolvemos realizar biópsia do ramo sensitivo superficial do nervo ulnar na mão em 17 pacientes com paresia ou paralisia desse nervo e espessamento do mesmo na altura do cotovelo. Os principais achados foram: redução do número de fibras mielínicas em 14 casos, infiltrado inflamatório em 13, fibrose em 12, desmielinização e remielinização em 9, presença de granuloma em 6 e visualização do Mycobacterium leprae em 5. Concluímos que a biópsia do ramo sensitivo superficial do nervo ulnar na mão é um bom meio diagnóstico de lepra em pacientes com acometimento desse nervo

  16. Studio della superficie degli impianti dentali in titanio: La nanotecnologia nella valutazione delle nuove superfici implantari in rapporto all'osteointegrazione dei mascellari

    OpenAIRE

    Ricci, Emanuele

    2015-01-01

    Il presente lavoro parte dalla descrizione dei processi di rimodellamento osseo mascellare a seguito della perdita di elementi dentari e la successiva riabilitazione mediante impianto dentale osteointegrato. Approfondiremo proprio i complessi aspetti dell’osteointegrazione su superfici implantari in titanio sia a livello micro che macroscopico. Nel campo dell’implantologia, infatti, il titanio risulta essere il materiale maggiormente impiegato in virtù della sua eccellente biocompatibilità...

  17. A Rainfall Simulator for the in situ Study of Superficial Runoff and Soil Erosion Un simulador de lluvia para el estudio in situ de la escorrentía superficial y la erosión de suelos

    Directory of Open Access Journals (Sweden)

    Claudia Sangüesa

    2010-03-01

    Full Text Available A rainfall simulator is an important tool for the study of runoff generation and soil loss because it can be used either under laboratory conditions, or in disturbed or natural soil. The objective of this study was to describe the design and operation of a rainfall simulator to evaluate soil loss in situ. The rainfall simulator has four full-cone spray nozzles with a Unijet system mounted in a straight line pipe configuration, and easily transported and assembled. Simulated rainfall uniformity was evaluated in the laboratory, whereas the applicability of the simulator in natural soil erosion plot conditions in an experimental field with different slopes was tested by quantifying runoff and evaluating soil erosion. Twenty simulations were carried out in the laboratory and sixteen in the field with slopes of 11, 21, and 39%. Four water-sprinklers in a straight line generated rainfall with uniformity close to 90%. The constructed simulator was easy to use and low cost, facilitating the necessary experimental replicates to achieve a suitable spatial representation of superficial runoff and soil loss on hillsides.El simulador de lluvia es una herramienta importante que permite estudiar los procesos de pérdida de suelo y escorrentía generados por la acción de la lluvia; éste puede utilizarse en laboratorio, bajo condiciones de suelo removido, o en terreno en condiciones naturales de suelo. El objetivo de este estudio fue describir el diseño y el funcionamiento de un simulador de lluvia construido para medir la pérdida de suelo in situ. El simulador de lluvia tenía cuatro boquillas de aspersión de cono lleno con sistema Unijet (Spray nozzles ubicados en línea, alimentadas mediante un sistema de tuberías de fácil transporte y montaje. En pruebas de laboratorio se evaluó la uniformidad de la lluvia generada; mientras que en terreno se evaluó la aplicabilidad del simulador sobre parcelas de erosión ubicadas en laderas naturales con

  18. Ductilidad y tenacidad de un borde cortado por plasma en una chapa de acero S460M de 15 mm de espesor

    OpenAIRE

    Aldazabal, J.; Martín-Meizoso, A.; Cicero González, Sergio; Klimpel, A.; Bannister, A.

    2015-01-01

    Los procesos de corte (y soldadura) son sin duda traumáticos para la microestructura de los materiales, de los que se deriva su comportamiento mecánico. Además esto afecta a la superficie, lo que agrava el problema, pues con frecuencia son las zonas que soportan unos mayores esfuerzos. En este trabajo se propone determinar si un corte por plasma mejora o no su comportamiento mecánico (fundamentalmente de cara a su comportamiento en fatiga bajo cargas alternadas). Se presentan los resultado...

  19. Síntese e caracterização de vermiculita mesoporosa obtida por modificação com sais complexos de alumínio e lantânio

    Directory of Open Access Journals (Sweden)

    M. V. S. Fernandes

    2014-06-01

    Full Text Available Os estudos de aumento do espaçamento interplanar basal, distribuição de poros e área superficial de uma argila mesoporosa obtida a partir de vermiculita precursora, foram realizados por intercalação de oligômero poli-hidroxi catiônico Al13 e um misto (La xAl13-x obtido por dopagem com lantânio, seguida de calcinação para formação dos pilares. As caracterizações das amostras foram feitas por difração de raios X, espectroscopia Mössbauer, ressonância magnética nuclear do estado sólido (27Al MAS-NMR e isotermas de N2 (BET. A presença de lantânio na estrutura da vermiculita resultou no aumento de sua área e de porosidade.

  20. APLICAÇÃO DE GEOTÊXTEIS BIODEGRADÁVEIS NA REDUÇÃO DO ESCOAMENTO SUPERFICIAL E CONTROLE DA EROSÃO SUPERFICIAL, UBERLÂNDIA/MG

    Directory of Open Access Journals (Sweden)

    José Fernando Rodrigues Bezerra

    2011-12-01

    Full Text Available Esse artigo aborda a utilização dos geotêxteis biodegradáveis no controle do escoamento superficial e perda de sedimentos. Para alcançar esse objetivo, uma estação experimental foi construída na Fazenda do Glória, no município de Uberlândia, Minas Gerais, a qual ficou funcionando no período de 18/11/2005 a 30/03/2006. Duas parcelas foram construídas, com as seguintes características: medidas de 1m x 10m, com uma calha, na parte inferior de cada parcela, para coletar água do escoamento superficial e sedimentos transportados. Uma das parcelas ficou sem cobertura vegetal durante todo o monitoramento e a outra recebeu a proteção dos geotêxteis (Buriti e sementes de gramínea. Durante os cinco meses de monitoramento, houve um total de 1.087,22mm de chuva. Na parcela sem cobertura vegetal, o total de escoamento superficial foi de 297,16L m-2, enquanto na parcela com os geotêxteis com gramíneas foi de 123,92L m-2, ou seja, mais da metade do total de escoamento da parcela sem proteção. Em termos da produção de sedimentos, a diferença foi ainda mais significativa; na parcela sem proteção dos geotêxteis, o total de solo erodido foi de 19.778,13g m-2, enquanto na outra parcela, o total foi de apenas 1.317,92g m-2. Esses resultados mostram que os geotêxteis construídos com fibra de Buriti podem ser bem eficientes no controle da erosão

  1. Bases anatômicas para o bloqueio anestésico do plexo braquial por via infraclavicular Bases anatómicas para el bloqueo anestésico del plexo braquial por vía infraclavicular Anatomical basis for infraclavicular brachial plexus block

    Directory of Open Access Journals (Sweden)

    Luiz Carlos Buarque de Gusmão

    2002-06-01

    Full Text Available JUSTIFICATIVA E OBJETIVOS: Procuramos demonstrar neste estudo a presença constante da fossa infraclavicular, com a finalidade de sua utilização como via de acesso para o bloqueio anestésico do plexo braquial por via infraclavicular. Visando solucionar o ponto onde os fascículos do plexo braquial podem ser localizados no interior da fossa, propusemos medidas a partir da face anterior da clavícula e do ângulo formado pelo encontro do músculo deltóide com a clavícula (ângulo deltoclavicular. A primeira medida permite localizar em profundidade o local onde passa o plexo braquial. Já a segunda, determina a projeção dos fascículos dentro da fossa, o que corresponde ao ponto de entrada da agulha na superfície cutânea. MÉTODO: Foram efetuadas medidas entre a face anterior da clavícula e os fascículos do plexo braquial, e do ângulo deltoclavicular até a projeção superficial dos fascículos. Com base nos achados anatômicos foi proposta uma técnica de abordagem do plexo braquial por via infraclavicular. RESULTADOS: Foram analisadas 100 regiões infraclaviculares de cadáveres fixados. A fossa infraclavicular foi detectada em 96 casos. Nessas os fascículos do plexo braquial localiza-se totalmente ou parcialmente em 97,9%. A medida aferida entre a face anterior da clavícula e os fascículos do plexo, foi de 2,49 cm e do ângulo deltoclavicular até a projeção superficial dos fascículos estava em 2,21 cm. CONCLUSÕES: Os dados obtidos permitem a determinação precisa do ponto de introdução da agulha, a qual, dirigida perpendicular à pele, atinge o plexo braquial sem perigo de provocar pneumotórax ou lesão vascular, possibilitando uma segurança maior aos anestesiologistas, e permitindo a volta da prática do bloqueio do plexo abaixo da clavícula.JUSTIFICATIVA Y OBJETIVOS: Buscamos demostrar en este estudio la presencia constante de la fosa infraclavicular, con la finalidad de su utilización como vía de acceso para el

  2. CRITERIOS PARA LA EVALUACIÓN DE SUPERFICIES MULTITÁCTILES Y SUS APLICACIONES

    Directory of Open Access Journals (Sweden)

    YENNY A. MÉNDEZ

    2012-06-01

    Full Text Available Las superficies multitáctiles son tecnologías que empiezan a tener un elevado uso. Se toman como referentes aspectos utilizados para la evaluación de usabilidad de sistemas interactivos, así como las característicasque los investigadores y desarrolladores sugieren que deberían tener las superficies multitáctiles y las aplicaciones desarrolladas. Se presenta una propuesta inicial de criterios que deberían tenerse en cuenta para incluir  aspectos de ergonomía, usabilidad y colaboración en el momento de realizar evaluaciones para estas tecnologías. Se ilustra cómo se pueden aplicar los criterios propuestos a través de un caso de estudio que cuenta con resultados promisorios.

  3. Cistitis por schistosoma haematobium, presentación de un caso

    Directory of Open Access Journals (Sweden)

    Ramón Zaragoza Durañona

    2014-08-01

    Full Text Available No es frecuente en nuestro medio la infección por Schistosoma. haematobium, pero existen todos los elementos de la triada ecológica para su transmisión. Se presenta el caso de un paciente masculino, de raza mestiza, con 46 años de edad y procedencia rural, que refiere dolores lumbares al orinar, disuria, tenesmo vesical y polaquiuria durante el último año. Al examen físico se encontró el abdomen discretamente doloroso a la palpación superficial y profunda en hipogastrio y fosas lumbares. Se trató como una infección urinaria sin mejoría. Los complementarios arrojaron discreta eosinofilia y reflujo vesicoureteral grado IV en la uretrocistografía retrógrada y miccional. La cistoscopia videoasistida reportó, a nivel del trígono, la mucosa vesical enrojecida con estructuras en forma de granos de arroz de aspecto puntiforme; la biopsia informó huevos de esquistosomas y cambios metaplásicos en el epitelio vesical. Se trató con praziquantel y desaparecieron los síntomas. A los seis meses los complementarios resultaron normales y el paciente está asintomático. Se concluye en la importancia de considerar la infección por Schistosoma haematobium entre los diagnósticos de la infección urinaria refractaria al tratamiento

  4. ESTUDIO DE LA VARIABILIDAD ESPACIAL DE LA TEMPERATURA DE SUPERFICIE EN EL NORTE DE LA PROVINCIA DEL NEUQUÉN CON IMÁGENES SATELITALES

    Directory of Open Access Journals (Sweden)

    Marisa Gloria Cogliati

    2015-12-01

    Full Text Available La zona noroeste de la provincia del Neuquén constituye una zona importante debido a su utilización con fines ganaderos, pero los sistemas áridos o semi áridos como el estudiado en el presente trabajo son vulnerables a procesos de uso del suelo y desertización. En este trabajo se presenta el análisis de la temperatura de superficie obtenida a partir de información del canal térmico del satélite Landsat 7 ETM+ para esa región durante un periodo fresco (otoño-invierno y cálido (primavera-verano. El estudio es parte de un proyecto de análisis geoecológico utilizando imágenes Landsat. La zona no cuenta con estudios de la variabilidad espacial de la temperatura del aire y del suelo debido a la necesidad de contar con redes de información micro o meso meteorológicas que incorporen una mayor densidad espacial de observaciones siguiendo el gradiente altitudinal y la complejidad del terreno debido a que el área es de difícil acceso y ho hay datos de superficie disponibles. Esto hace necesario utilizar métodos alternativos para el estudio de la distribución espacial de variables topo meteorológicas. La información satelital provee información en distintas escalas temporales y espaciales a un menor costo. En el presente trabajo, se obtuvo la radiancia emitida en la superficie utilizando la radiancia medida por el satélite a partir de la ecuación de transferencia radiativa y el modelo MODTRAN con información de reanálisis disponibles en línea. Se analizaron seis escenas libres de nubosidad. La temperatura de superficie presentó un comportamiento correlacionado con la topografía principalmente en el período frío, con una menor relación en verano. La isoterma de 273 K (0 oC alcanzó alturas de 1900 m, restringiéndose a alturas mayores a 3700 m en verano. Las áreas con temperatura menor a 273 K fueron las que presentaron mayores diferencias entre el período cálido y el período frío analizados

  5. Estudio por Drifts de la oxidación en óxido nitroso de un carbón activado

    Directory of Open Access Journals (Sweden)

    José de Jesús Díaz Velásquez

    2011-03-01

    Full Text Available Con el propósito de obtener materiales con propiedades superficiales diversas, en este trabajo se modificó un carbón activado mediante tratamiento térmico en una atmósfera de 20 % de óxido nitroso en nitrógeno a 500°C, por diferentes períodos de tiempo, al igual que en atmósferas de 5% de oxígeno en nitrógeno a 425°C por 600 minutos, y de 100% dehidrógeno a 950°C por 360 minutos. Para caracterizar la química superficial de los materiales tratados, se utilizó latécnica DRIFTS, cuyos resultados cualitativos muestran que los tratamientos con óxido nitroso tienen efectos mayoressobre la intensidad de los grupos superficiales formados. Estos cambios podrían estar asociados con la incorporacióndel nitrógeno dentro de la matriz del carbón. De acuerdo con los reportes de la literatura, la oxidación en fase gaseosadel carbón activado muestra principalmente grupos superficiales, tales como anhídridos carboxílicos, fenoles ycarboxilatos, lactonas y quinonas.

  6. Superficial siderosis of the central nervous system due to brachial plexus injury: a case report

    International Nuclear Information System (INIS)

    Setogutti, Enio Tadashi; Cassuriaga, Jefferson; Valduga, Simone Gianella; Lorenzzoni, Pablo Longhi; Severgnini, Giancarlo Muraro; Feldman, Carlos Jader

    2005-01-01

    Superficial siderosis can be caused by hemosiderin deposition o the leptomeninges and subpial layers of the neuro-axis due to recurrent subarachnoid haemorrhage. Probable intrathecal bleeding sites must be investigated. In ut t 50% of the patients the bleeding source may be identified and the progression of the disease can be interrupted. In this study, the authors present a case of superficial siderosis of the central nervous system developed two decades after a traumatic lesion of the brachial plexus.(author)

  7. Superficial shell insulation in resting and exercising men in cold water.

    Science.gov (United States)

    Veicsteinas, A; Ferretti, G; Rennie, D W

    1982-06-01

    From measurements of subcutaneous fat temperature (Tsf) at known depths below the surface, skin surface temperature (Tsk), and direct skin heat flux (H), the superficial shell isulation (Iss) of the thigh (fat + skin) was calculated as Iss (degrees C.m2.w-1) = (Tsf - Tsk)/H in nine male subjects immersed head out in a well-stirred water bath. Also, at critical water temperature (CWT = 28-33 degrees C), eight of the subjects rested for 3 h, enabling overall maximal tissue insulation (It,max) to be calculated as It,max (degrees C.m2.W-1) = (Tre - Tw)/(0.92 M +/- delta S), where Tre is rectal temperature, Tw is water temperature, M is metabolic rate, and s is loss or gain of body heat. Five subjects performed up to 2 h of mild leg cycling, preceded and followed by 60 min of rest, and both thigh Iss and overall It were measured during exercise. Iss increased from minimal values in Tw greater than 33 degrees C to maximal values (Iss,max) at CWT or below. Iss,max was linearly related to tissue thickness (d) in millimeters of fat plus skin, Iss,max (degrees C.m2.W-1) = 0.0048d-0.0052; r = 0.95, n = 37, and was not influenced by leg exercise up to a metabolic rate of 150 W.m-2 in CWT despite large increases in Tsf and H and large decreases in overall It. The slope of Iss,max vs. depth, 0.0048 degrees C.m2.W-1.mm-1, is almost identical to thermal resistivity of fat in vitro, suggesting that the superficial shell is unperfused in CWT at rest or during mild exercise. When maximal superficial shell insulation (It,ss,max) for the whole body was calculated with allowance for differing fat thicknesses and surface areas of body regions, it could account for only 10-15% of overall It,max at rest and 35-40% of overall It in mild exercise. We suggest that the poorly perfused muscle shell plays a more important role as a defense against cooling at CWT than does the superficial shell (fat + skin), particularly at rest.

  8. Caracterização de depósitos realizados pelo processo de deposição por fricção em chapas de aço de alto carbono

    OpenAIRE

    Márcio Levi Kramer de Macedo

    2011-01-01

    Este trabalho tem por objetivo estudar um processo alternativo de deposição e reparos em defeitos superficiais de componentes ou estruturas fabricados em aço de alto carbono, utilizando o processo de soldagem de Deposição Superficial por Fricção (Friction Surfacing). Foi avaliada a influência dos parâmetros do processo de deposição como: força axial, velocidade de rotação do pino consumível e velocidade de avanço de deposição nas propriedades mecânicas e metalúrgicas dos depósitos com diferen...

  9. Evolución de una sonda de vibraciones para simplificar la evaluación de transmisión sonora por flancos entre recintos

    OpenAIRE

    San Millán-Castillo, Roberto; Domingo, Salvador; Pavón García, Ignacio

    2015-01-01

    Conocer el nivel de velocidad de vibración en las superficies de un recinto es relevante para obtener información sobre la transmisión sonora por flancos entre recintos. El mercado de la instrumentación ofrece una amplia variedad de soluciones en cuanto a sensores. Cuando se trata la técnica de montaje del acelerómetro, la respuesta es menos obvia. Se presenta la evolución de una sonda diseñada para ejecutar estas mediciones. Se prio...

  10. Reemplazo de áreas arboladas por chaparrales y comunidades herbáceas en el período 1970-2000 en una microcuenca de Durango, México

    Directory of Open Access Journals (Sweden)

    Marco Antonio Márquez Linares

    2012-02-01

    Full Text Available Se realizó una comparación entre la cobertura de la vegetación existente en la microcuenca del arroyo “El Carpintero” cercana a la ciudad de Durango, México, en 1970 y 2000. Las áreas dominadas por chaparrales y por especies herbáceas aumentaron su extensión de 9 571 a 11 754 ha y de 2 188 a 6 774 ha, respectivamente, a costa de la superficie dominada por arbóreas que disminuyó de 12 952 a 6 193 ha. La tasa de deforestación anual fue de -2.43%. Las principales fuerzas que provocaron este cambio fueron: el manejo de recursos basado en la ganadería extensiva, la agricultura de temporal, la extracción de leña como principal fuente de energía y los incendios forestales.

  11. "A Tale of Two Planes": Deep Versus Superficial Serratus Plane Block for Postmastectomy Pain Syndrome.

    Science.gov (United States)

    Piracha, Mohammad M; Thorp, Stephen L; Puttanniah, Vinay; Gulati, Amitabh

    Postmastectomy pain syndrome (PMPS) is a significant burden for breast cancer survivors. Although multiple therapies have been described, an evolving field of serratus anterior plane blocks has been described in this population. We describe the addition of the deep serratus anterior plane block (DSPB) for PMPS. Four patients with history of PMPS underwent DSPB for anterior chest wall pain. A retrospective review of these patients' outcomes was obtained through postprocedure interviews. Three of the patients previously had a superficial serratus anterior plane block, which was not as efficacious as the DSPB. The fourth patient had a superficial serratus anterior plane that was difficult to separate with hydrodissection but had improved pain control with a DSPB. We illustrate 4 patients who have benefitted from a DSPB and describe indications that this block may be more efficacious than a superficial serratus plane block. Further study is recommended to understand the intercostal nerve branches within the lateral and anterior muscular chest wall planes.

  12. Feline superficial pyoderma: a retrospective study of 52 cases (2001-2011).

    Science.gov (United States)

    Yu, Hui W; Vogelnest, Linda J

    2012-10-01

    Superficial pyoderma is traditionally considered rare in cats but may be more prevalent than previously reported. To better characterize superficial pyoderma in cats. Fifty-two cats from a dermatology referral population over a 10 year period. This study was retrospective. Cases were included if neutrophils and intracellular bacteria were reported from surface cytology of skin lesions. Medical records were reviewed for signalment, historical and clinical data, cytology results, primary skin diagnoses and treatment details. Disease prevalence was 20%, with no breed or sex predispositions. The estimated median age of onset was 2 years, affecting 54% of cats by 3 years and 23% after 9 years. Fewer cases presented during winter (15%) compared with other seasons. Skin lesions were typically multifocal, affecting the face (62%), neck (37%), limbs (33%) and ventral abdomen (29%) most commonly. Crusting (83%), alopecia (67%), ulceration/erosion (54%) and erythema (46%) were common lesion types. Pruritus was reported in 92% of cats. Underlying hypersensitivities (confirmed in 60%; suspected in 19%), and atopic dermatitis specifically (confirmed in 48%), were the most frequent primary dermatoses. Cats were treated with a variety of systemic and/or topical antimicrobials. The overall apparent response was considered good in 61% and poor in 27% of cats. Recurrence was confirmed or suspected in 42% of cats. Feline superficial pyoderma was more prevalent in this study population than previously reported. Young cats with hypersensitivities and older cats were more commonly affected, and a variety of lesion types and distributions occurred. © 2012 The Authors. Veterinary Dermatology © 2012 ESVD and ACVD.

  13. "Estudio tribologico de aceros para moldes. Aplicacion al moldeo por inyeccion de polibutilentereftalato reforzado con fibra de vidrio"

    Science.gov (United States)

    Martinez Mateo, Isidoro Jose

    fabricacion del molde, tienen una gran influencia sobre su comportamiento en servicio a lo largo de la vida util del molde. En la primera parte del presente estudio, a partir de ensayos punzon sobre disco, se ha determinado la relacion entre la resistencia al desgaste y la dureza de aceros para moldes obtenidos a partir de bloques de gran espesor, estudiando los principales mecanismos de desgaste que tienen lugar. A continuacion, con el fin de determinar el dano superficial que sufren los aceros para moldes en condiciones reales de inyeccion, se han estudiado distintos tipos de aceros utilizados comercialmente en moldes de inyeccion de polimeros y materiales compuestos, seleccionando las condiciones de operacion para determinar la variacion de la rugosidad superficial del acero en funcion del material inyectado, del numero de operaciones sucesivas de inyeccion y de la orientacion del flujo de inyeccion, mediante tecnicas de perfilometria optica y microscopia electronica de barrido. Ademas del dano superficial sufrido por el acero con el numero de piezas inyectadas, tambien se ha determinado la evolucion de la rugosidad superficial de los materiales inyectados, polibutilentereftalato (PBT) puro y materiales compuestos derivados de PBT por adicion de un 20 o un 50% en peso de fibra de vidrio. En el caso de las piezas inyectadas, se ha caracterizado su microestructura en funcion del flujo de inyeccion y de la densidad de fibra, se han determinado sus propiedades termicas y dinamico-mecanicas, asi como la variacion de la rugosidad superficial de las piezas inyectadas con el numero de operaciones de inyeccion y con la geometria de las distintas secciones de las piezas. Finalmente, se ha evaluado la resistencia a la abrasion de PBT reforzado con un 50% de fibra, en funcion del numero de piezas inyectadas y de la direccion de rayado con respecto a la orientacion del flujo de inyeccion.

  14. Modificación superficial de aleaciones de base aluminio (anodizadas y no anodizadas mediante recubrimientos de sílice

    Directory of Open Access Journals (Sweden)

    García-Heras, M.

    2004-04-01

    Full Text Available Transparent and colourless silica coatings were deposited on anodising and non-anodising substrates of aluminium-base alloys (series 6063. Coatings were prepared by soLgel (dipping method from a silica alkoxide and a mixture of both silica alkoxide and silica alkylalkoxide. Preparations were optimised from viscosity, density, surface tension, and contact angle measurements. Densification was carried out at 60 and 120 °C. Reflectance attenuation of coated samples was analysed by UV-VIS-NIR spectroscopy. The results indicated that -10 % of attenuation is reached. Durability and resistance against degradation tests of the metal/coating system were undertaken by immersion into aqueous solutions. Electrochemical impedance measurements and potential corrosion of the metallic substrate for variable times were performed.

    Se han depositado recubrimientos transparentes e incoloros de sílice sobre sustratos anodizados y no anodizados de aleaciones de base aluminio (serie 6063. Los recubrimientos se prepararon por sol-gel (inmersión-extracción a partir de un alcóxido de silicio y de una mezcla de alcóxido y alquilalcóxido de silicio. La optimización de las fonnulaciones se basó en medidas de viscosidad, densidad, tensión superficial y ángulo de contacto. La densificación se llevó a cabo a 60 y 120 °C. La atenuación de la reflectancia luminosa de las muestras recubiertas se analizó por espectroscopia UV-VIS-IRP. Los resultados indicaron que se alcanza casi un 10 % de atenuación. Los ensayos de durabilidad y resistencia a la degradación del sistema metal/recubrimiento se realizaron por inmersión en disoluciones acuosas, aplicando medidas de impedancia electroquímica y del potencial de corrosión del sustrato metálico, para tiempos variables.

  15. Emotional words can be embodied or disembodied: the role of superficial vs. deep types of processing

    OpenAIRE

    Abbassi, Ensie; Blanchette, Isabelle; Ansaldo, Ana I.; Ghassemzadeh, Habib; Joanette, Yves

    2015-01-01

    Emotional words are processed rapidly and automatically in the left hemisphere (LH) and slowly, with the involvement of attention, in the right hemisphere (RH). This review aims to find the reason for this difference and suggests that emotional words can be processed superficially or deeply due to the involvement of the linguistic and imagery systems, respectively. During superficial processing, emotional words likely make connections only with semantically associated words in the LH. This pa...

  16. Do similar factors control the glomerular filtration rate of superficial and juxtamedullary nephrons

    International Nuclear Information System (INIS)

    Rouffignac, C. de

    1975-01-01

    The SNGFR intrarenal distribution was studied under conditions where the whole kidney GFR remains unchanged and then where it is altered as compared to the normal non diuretic state. Only data obtained from experiments in which the SNGFR of both superficial and juxtamedullary nephrons were measured with the same techniques were reported. The superficial over juxtamedullary SNGFR ratio appears to be relatively stable and independent of physiological conditions. Nevertheless, in cases which indicate changes in the SNGFR intrarenal distribution, these changes remain always of limited magnitude. Thus it seems possible to conclude, that the SNGFR is controlled by factors that act, at least qualitatively, in the same manner in the whole nephron population [fr

  17. Implementación de un método operativo para la estimación de la temperatura superficial terrestre en la Región Callao usando datos de las imágenes satelitales

    OpenAIRE

    Mendoza Nolorbe, Juan Neil

    2014-01-01

    El sensor TM del satélite Landsat 5 ha registrado datos imágenes de la superficie de la Tierra desde el año 1984 hasta inicios del año 2013, con una resolución espacial de 30m y con una frecuencia de visita cada 16 días. Los datos imágenes de este sensor son del tipo multiespectral, registrados por seis bandas espectrales, en el rango del espectro visible, infrarrojo cercano e infrarrojo térmico. La banda térmica (banda 6) del sensor TM ofrece la oportunidad de determinar la temperatura de la...

  18. Effects of superficial gas velocity and fluid property on the ...

    African Journals Online (AJOL)

    In the present study, the influence of superficial gas velocity and fluid properties on gas holdup and liquid circulation velocity in a three-phase external loop airlift column using polystyrene (0.0036 m diameter and 1025.55 kg/m3 density) and nylon-6 (0.0035 m diameter and 1084.24 kg/m3 density) particles with aqueous ...

  19. Efficacy and safety of superficial cryotherapy for alopecia areata: A retrospective, comprehensive review of 353 cases over 22 years.

    Science.gov (United States)

    Jun, Myungsoo; Lee, Noo Ri; Lee, Won-Soo

    2017-04-01

    Alopecia areata (AA) affects anagen hair follicles, resulting in non-scarring hair loss. Since introduced by Huang et al., superficial cryotherapy has been accepted as a considerable primary therapeutic modality for AA. The aim of this study was to objectively clarify the therapeutic efficacy and safety of superficial hypothermic cryotherapy for treatment of AA. Medical records of 353 patients from 1993 to 2014 were retrospectively analyzed. According to the response to the superficial cryotherapy, patients were categorized into four groups: "marked", "partial", "poor" and "no recovery". The marked and partial recovery groups were considered as responders. The proportions of the responders among patient subgroups which were defined by various patients, disease, and treatment factors were compared. Of the patients, 60.9% were classified as responders after 3 months of superficial hypothermic cryotherapy. The proportion of the responders were higher when the treatment interval was 2 weeks or less and in the incipient disease stage, with statistical significance. No severe side-effects other than mild pain and pruritus were reported. In conclusion, superficial cryotherapy is an effective and safe therapeutic modality for AA. Especially when the treatment interval is 2 weeks or less and in the first occurrence of the disease, the therapeutic outcome is superior. © 2016 Japanese Dermatological Association.

  20. Wear and superficial roughness of glass ionomer cements used as sealants, after simulated toothbrushing Desgaste e rugosidade superficial de cimentos de ionômero de vidro utilizados como selantes, após escovação simulada

    Directory of Open Access Journals (Sweden)

    Daniela Rios

    2002-12-01

    Full Text Available The purpose of this study was to evaluate, in vitro, the properties (wear and roughness of glass ionomer cements that could influence their indication as pit and fissure sealants. The utilized materials were Fuji Plus, Ketac-Molar and Vitremer (in two different proportions: 1:1 and ¼:1. The resin-based sealant Delton was used as control. By means of an electronic balance (precision of 10-4 g, wear was measured in function of weight loss after simulated toothbrushing. Superficial roughness was determined by means of a surface roughness-measuring apparatus. The results revealed that diluted Vitremer and Fuji Plus were less resistant to toothbrushing abrasion and had the greatest increase in superficial roughness.Although in clinical situations luting or diluted ionomer cements are often utilized as alternatives to resin-based sealants, the resultsof this study revealed that the properties of those cements are worse than those of restorative ionomers, whichpresented results similar to those of the evaluated resin sealant.O presente estudo foi conduzido in vitro com o intuito de constatar as propriedades (desgaste e rugosidade dos CIV, as quais influenciam na sua indicação como material selador de fossas e fissuras. Os materiais empregados foram Fuji Plus, Ketac-Molar e Vitremer (duas proporções: 1:1 e ¼:1. O selante Delton foi controle. A determinação do desgaste foi obtida através da quantidade de massa perdida após a escovação e a rugosidade através da análise quantitativa da superfície. Os resultados mostraram que o Vitremer diluído e o Fuji Plus apresentaram maior grau de desgaste e maior aumento de rugosidade. Apesar de clinicamente se encontrar um maior uso dos ionômeros de vidro cimentantes ou diluídos como forma alternativa para material selador; este trabalho permitiu concluir que estes possuem propriedades bastante inferiores quando comparados aos ionômeros restauradores que, por sua vez, possuem resultados semelhantes

  1. Fissure sealants: in vitro evaluation of abrasion wear and superficial roughness

    Directory of Open Access Journals (Sweden)

    Vanessa Pardi

    2008-06-01

    Full Text Available The aim of this study was to compare the in vitro wear and superficial roughness of four materials (Delton Dyract Flow, Dentsply; Filtek Flow, Vitremer, 3M ESPE used as fissure sealant in 32 extracted human molars divided in four groups (n = 8 after abrasion with toothbrush/dentifrice. Impressions of each occlusal surface were made to analyze wear and circular specimens were prepared to analyze the roughness. Teeth and specimens were mounted in a toothbrushing machine. The replicas were observed using a SEM to determine the superficial wear. Wear: there were no statistically significant differences either between Delton and Filtek Flow or between Dyract Flow and Vitremer. Roughness: there were no statistical differences between Filtek Flow and Dyract Flow, Dyract Flow and Vitremer, Vitremer and Delton., Considering the clinical practice, if caries activity is present the use of Vitremer is suggested not only for its well known fluoride release, but it presented good roughness results.

  2. Colgajo deltopectoral bilateral para el tratamiento de úlceras por radionecrosis en el cuello: Caso clínico

    Directory of Open Access Journals (Sweden)

    P. Benito Duque

    2006-09-01

    Full Text Available Bakamjian describió el colgajo deltopectoral en 1965, recibiendo inicialmente una gran aceptación en cirugía de cabeza y cuello. Sin embargo, un porcentaje de fallos del 10%-25% descrito por varios autores motivó su progresivo abandono y su sustitución por otras alternativas. Los autores hacen una revisión de la bibliografía, analizando las modificaciones técnicas que han mejorado la viabilidad de este colgajo y describen la capacidad del colgajo deltopectoral elevado bilateralmente para aportar suficiente tejido en el caso de un paciente con defecto bilateral en el cuello secundario a radiodermitis severa. En la actualidad, el colgajo deltopectoral, teniendo en consideración las aportaciones técnicas descritas, puede seguir considerándose como una fuente de tejido con la calidad y fiabilidad idóneas para técnicas de reconstrucción superficial en cabeza y cuello.Bakamjian introduced the deltopectoral skin flap en 1965, and there after it was used extensively for reconstructive surgery of the head and neck. Within the next years, flap failure rates of 20% to 25% were reported, and several alternative methods of reconstruction have supplanted the preeminent position of the deltopectoral flap. This work is a review of the reconstructive experience afforded by several authors and evaluates the technical modifications used to enhance the reliability of this flap. The authors describe the ability of the deltopectoral flap raised bilaterally to provide tissue enough for an extensive irradiated neck, allowing resurfacing a bilateral cutaneous defect after radiation therapy. The deltopectoral flap remains a useful and reliable tissue source for superficial neck reconstruction by implementing several technical modifications.

  3. Risk Factors and Clinical Evaluation of Superficial Femoral Artery Stent Fracture: Prote'ge'GPS Stent

    International Nuclear Information System (INIS)

    Lee, Da Un; Kim, Jae Kyu; Jung, Hye Doo; Huh, Tae Wook; Yim, Nam Yeol; Oh, Hyun jun; Choi, Soo Jin Na; Chang, Nam Kyu

    2010-01-01

    To evaluate the occurrence of superficial femoral artery stent fractures, the risk factors of stent fracture, and the relationship between fractures and clinical findings. Of the 38 patients who underwent treatment with Prote'ge'GPS stenting due to arterial occlusions on the superficial femoral artery, 17 also underwent a clinical analysis. Forty-three stents were inserted in the 17 superficial femoral arteries, ranging between 15 and 50 cm in length, with a mean treated length of 26.4 cm (15-50 cm). A fracture was evaluated by taking a PA and lateral simple radiography, as well as a follow-up evaluation accompanied with a CT angiography, DSA, and a color Doppler sonography. The examination involved the assessment of the difference between bone fractures due to length, placement, and frequency. Fractures occurred in 13 of 43 stents (30.2%). A total of 10 (71.4%) occurred in the upper third, compared to 4 (28.6%) in the lower third of the superficial femoral artery. In addition, 10 stents (71.4%) had a single strut fracture, whereas 4 (28.6%) had multiple strut fractures. A stent fracture occurred more frequently when the stents and lesions were longer (p=0.021, 0.012) and the stents were inserted near the joint. However, there was no significant relationship between stent numbers and the fractures (p=0.126). When the stents were inserted along the popliteal artery, a stent fracture occurred more frequently in the lower third of the artery. The stent fractures did not significantly influence the patency rate of the stented artery (p=0.44) Prote'ge'GPS stents in the superficial femoral artery revealed a considerable number of fractures and the fracture frequency showed a significant relationship with the length of stents and lesions. The closer stent insertion was to the joints, the more frequently fractures occurred. There were no evident significant relationships between the presence of stent fractures and the patency of the stented arteries

  4. Thermographic Imaging of the Superficial Temperature in Racing Greyhounds before and after the Race

    Directory of Open Access Journals (Sweden)

    Mari Vainionpää

    2012-01-01

    Full Text Available A total of 47 racing greyhounds were enrolled in this study on two race days (in July and September, resp. at a racetrack. Twelve of the dogs participated in the study on both days. Thermographic images were taken before and after each race. From the images, superficial temperature points of selected sites (tendo calcaneus, musculus gastrocnemius, musculus gracilis, and musculus biceps femoris portio caudalis were taken and used to investigate the differences in superficial temperatures before and after the race. The thermographic images were compared between the right and left legs of a dog, between the raced distances, and between the two race days. The theoretical heat capacity of a racing greyhound was calculated. With regard to all distances raced, the superficial temperatures measured from the musculus gastrocnemius were significantly higher after the race than at baseline. No significant differences were found between the left and right legs of a dog after completing any of the distances. Significant difference was found between the two race days. The heat loss mechanisms of racing greyhounds during the race through forced conduction, radiation, evaporation, and panting can be considered adequate when observing the calculated heat capacity of the dogs.

  5. Thermographic imaging of the superficial temperature in racing greyhounds before and after the race.

    Science.gov (United States)

    Vainionpää, Mari; Tienhaara, Esa-Pekka; Raekallio, Marja; Junnila, Jouni; Snellman, Marjatta; Vainio, Outi

    2012-01-01

    A total of 47 racing greyhounds were enrolled in this study on two race days (in July and September, resp.) at a racetrack. Twelve of the dogs participated in the study on both days. Thermographic images were taken before and after each race. From the images, superficial temperature points of selected sites (tendo calcaneus, musculus gastrocnemius, musculus gracilis, and musculus biceps femoris portio caudalis) were taken and used to investigate the differences in superficial temperatures before and after the race. The thermographic images were compared between the right and left legs of a dog, between the raced distances, and between the two race days. The theoretical heat capacity of a racing greyhound was calculated. With regard to all distances raced, the superficial temperatures measured from the musculus gastrocnemius were significantly higher after the race than at baseline. No significant differences were found between the left and right legs of a dog after completing any of the distances. Significant difference was found between the two race days. The heat loss mechanisms of racing greyhounds during the race through forced conduction, radiation, evaporation, and panting can be considered adequate when observing the calculated heat capacity of the dogs.

  6. Tolerance and safety of superficial chemical peeling with salicylic acid in various facial dermatoses

    Directory of Open Access Journals (Sweden)

    Iqbal Zafar

    2005-03-01

    Full Text Available BACKGROUND: Chemical peeling is a skin-wounding procedure that may have some potentially undesirable side-effects. AIMS: The present study is directed towards safety concerns associated with superficial chemical peeling with salicylic acid in various facial dermatoses. METHODS: The study was a non-comparative and a prospective one. Two hundred and sixty-eight patients of either sex, aged between 10 to 60 years, undergoing superficial chemical peeling for various facial dermatoses (melasma, acne vulgaris, freckles, post-inflammatory scars/pigmentation, actinic keratoses, plane facial warts, etc. were included in the study. Eight weekly peeling sessions were carried out in each patient. Tolerance to the procedure and any undesirable effects noted during these sessions were recorded. RESULTS: Almost all the patients tolerated the procedure well. Mild discomfort, burning, irritation and erythema were quite common but the incidence of major side-effects was very low and these too, were easily manageable. There was no significant difference in the incidence of side-effects between facial dermatoses (melasma, acne and other pigmentary disorders. CONCLUSION: Chemical peeling with salicylic acid is a well tolerated and safe treatment modality in many superficial facial dermatoses.

  7. Biotransformación de lixiviado de suelo impactado con roxarsona por comunidades bacterianas de aguas subterráneas en condiciones anaeróbicas

    OpenAIRE

    Mafla Andrade, Santiago Xavier

    2014-01-01

    La Roxarsona® se usa como un complemento nutricional y antiparasitario de manera frecuente en la industria agrícola. Las bacterias presentes en el estiércol, suelo y agua producen la transformación de la roxarsona en productos tóxicos, que pueden lixiviarse desde la superficie hacia las napas de agua produciendo una exposición crónica al arsénico inorgánico el cual es tóxico. El objetivo del trabajo fue evaluar la transformación del lixiviado del suelo por las comunidades bacterianas pres...

  8. Modificación superficial de aceros y hierros fundidos mediante láser de Nd: YAG. // Steels and cast irons superficial modification by means of laser Nd: YAG.

    Directory of Open Access Journals (Sweden)

    R. Sagaró Z.

    2001-10-01

    Full Text Available Se presentan los resultados de los autores en el tratamiento térmico superficial con técnica láser (TTSL. Con el empleo deun láser de Nd: YAG se procedió al endurecimiento superficial de los aceros AISI 1045, W1, W112 y hierros fundidos detipo laminar y nodular. Los autores prestan atención a las rutas de endurecimiento superficial atendiendo a los parámetrosoperacionales del láser: potencia incidente en la zona de interacción (P y la velocidad de barrido del haz de láser (V. Deigual forma se establecen valoraciones acerca de las estructuras metalográficas obtenidas. En todos los casos se reportanvalores de microdureza Vickers que oscilan entre los 500-900 HV (incrementos de 3-4 veces respecto al substratooriginal. Los resultados obtenidos permiten establecer en todos los casos experimentados que el incremento de lavelocidad de barrido provocó una disminución de la profundidad de la capa endurecida. Las experiencias del TTSL en losaceros ensayados muestran una tendencia a la disminución de la profundidad del endurecimiento con el incremento delcontenido de carbono.Palabras claves: Endurecimiento superficial, parámetros de operación de láser., microdureza, profundidadde capa endurecida, de fallo, vibraciones.____________________________________________________________________________AbstractThis paper expose the experiences of researchers on the laser surface heat treatment. The hardening of AISI 1045, W1,W112 steels and cast irons flake and nodular was carried out by using a Nd: YAG laser. Operation parameters of laser, likebeam power (P and traverse speed of the laser spot (V are closely with hardening depth . Authors present some analysesabout metallographic studies. In all cases are reported Vickers microhardness about 500-900 HV (three or four times higherthan original substrates. Relations between microhardness and depth of hardening are presented for the processedmaterials. Experimental results showed that the increased

  9. The defence architecture of the superficial cells of the oral mucosa

    NARCIS (Netherlands)

    Asikainen, P.; Ruotsalainen, T.J.; Mikkonen, J.J.W.; Koistinen, A.; ten Bruggenkate, C.M.; Kullaa, A.M.

    2012-01-01

    The oral epithelium together with the saliva and its components forms a complex structure which is the first line of defence in the oral cavity. The surface of superficial cells of the oral epithelium contains ridge-like folds, microplicae (MPL), which are typical of the surfaces of areas covered

  10. Recent advances in high-throughput molecular marker identification for superficial and invasive bladder cancers

    DEFF Research Database (Denmark)

    Andersen, Lars Dyrskjøt; Zieger, Karsten; Ørntoft, Torben Falck

    2007-01-01

    individually contributed to the management of the disease. However, the development of high-throughput techniques for simultaneous assessment of a large number of markers has allowed classification of tumors into clinically relevant molecular subgroups beyond those possible by pathological classification. Here......Bladder cancer is the fifth most common neoplasm in industrialized countries. Due to frequent recurrences of the superficial form of this disease, bladder cancer ranks as one of the most common cancers. Despite the description of a large number of tumor markers for bladder cancers, none have......, we review the recent advances in high-throughput molecular marker identification for superficial and invasive bladder cancers....

  11. Subintimal angioplasty for the treatment of long segment occlusion of superficial femoral artery: the midterm results

    International Nuclear Information System (INIS)

    Lou Wensheng; Gu Jianping; He Xu; Chen Liang; Chen Guoping; Su Haobo; Song Jinhua; Wang Tao; Xu Ke

    2011-01-01

    Objective: To discuss the clinical value of subintimal angioplasty in treating long segment occlusion of superficial femoral artery and to observe its midterm results. Methods: Subintimal angioplasty was performed in 45 patients with long segment occlusion of superficial femoral artery, whose clinical presentation was intermittent claudication or critical limb ischemia. The primary patency, limb salvage and factors influencing long-term patency were observed, and the clinical data were analyzed. Results: Of the total 45 cases, the subintimal angioplasty was successfully accomplished in 43. The success rate of antegrade approach technique via the superficial femoral artery was 80% (n=36), the occlusion was recanalized by using retrograde approach technique via ipsilateral popliteal artery in 7 case. The total technical success rate was 95.6%. The primary patency in 43 successful cases at 6, 12, 24 and 36 months was 85.7%, 69.0% 57.3% and 50.9%, respectively. No statistically significant difference in primary patency existed between the group of intermittent claudication and the group of critical limb ischemia (P>0.05). Statistically significant prediction factors for primary patency included the number of the run off vessels below the knee and the length of the occlusion (P<0.05). Conclusion: Subintimal angioplasty is an effective procedure for the treatment of long segment occlusions of superficial femoral artery with satisfactory mid-term results. (authors)

  12. Superficial Vein Thrombophlebitis in a Football Athlete.

    Science.gov (United States)

    Schleich, Kevin T; Smoot, M Kyle

    2016-03-01

    A 22-year-old professional football player presented to a preparticipation physical examination with a 2-week history of left leg discomfort extending from the groin to the knee over the previous 2 weeks. He was found to have superficial vein thrombophlebitis (SVT) of the left great saphenous vein extending from the knee to within approximately 1.6 cm of the saphenofemoral junction. There is paucity in the literature regarding the management of SVT, particularly in actively training athletes. This case addresses the considerations of anticoagulation management for SVT as well as the unique challenge of managing anticoagulation therapy in an athlete that is actively training.

  13. Cambio climático, ensalitramiento de suelos y producción agrícola en áreas de riego

    Directory of Open Access Journals (Sweden)

    Leonardo Pulido Madrigal

    2016-04-01

    Full Text Available Se analizó el impacto del clima en los problemas de salinidad, drenaje y producción agrícola en el Distrito de Riego 038 río Mayo Sonora el cual presenta afectaciones por sales en 32% de su superficie. Con datos de clima y agronómicos generados entre 1970-2001, se elaboraron modelos de regresión lineal simple para estudiar la relación entre la superficie ensalitrada con la temperatura ambiente, superficie afectada por niveles freáticos superficiales, volumen de riego, salinidad del agua de riego, precipitación pluvial, producción agrícola y productividad del agua. Asimismo, se correlacionó el manto freático con la temperatura, volumen de riego y precipitación pluvial. La producción se correlacionó con la salinidad del suelo, temperatura ambiente, superficie afectada por niveles freáticos superficiales y volumen de riego. Además, por medio de modelos de regresión lineal múltiple se determinaron las relaciones tanto de la superficie ensalitrada como de la producción agrícola, con la temperatura, superficie afectada por niveles freáticos superficiales, volumen de riego, superficie cosechada y precipitación pluvial. Los resultados evidenciaron que el aumento de superficie ensalitrada está relacionado con el incremento de temperatura; mismo que se asoció con la disminución del volumen de cosechas y con el aumento de superficie con niveles freáticos. Se encontró que los volúmenes de riego impactan en el incremento de la superficie agrícola con niveles freáticos someros y con el aumento de superficie ensalitrada. Con el calentamiento global los problemas de salinidad del suelo se incrementaron entre 24.1 y 15.8% en los estratos de suelo a 30 y 60 cm de profundidad, respectivamente. Asimismo, se estimó un crecimiento del 21.9% de superficies con niveles freáticos superficiales. El impacto del calentamiento global en el volumen de producción agrícola se estimó en una reducción del 18.9% del volumen de cosechas.

  14. Daño por contacto de cerámicas Y-TZP sometidas a degradación hidrotérmica

    OpenAIRE

    Trinel, Jérémy

    2009-01-01

    Este trabajo evalúa el comportamiento del daño por contacto en cerámicas de circona 3Y-TZP sometida a diferentes tiempos de degradación hidrotérmica (0, 5, 10, 30 y 60 horas), mediante la utilización de metodologías de indentación esférica (hertziana) Se analiza el comportamiento plástico del material mediante la evaluación del daño que se genera producto de la aplicación de cargas monotónicas en la superficie. Así mismo se desarrolla un mapa de daño y se evalúa el comportamie...

  15. Arteriopatía periférica crónica inducida por cocaína

    Directory of Open Access Journals (Sweden)

    Sonia Pankl

    2012-02-01

    Full Text Available La trombosis periférica aguda inducida por cocaína ha sido descripta en la literatura, siendo una complicación poco común. Si bien existen comunicaciones que reflejan los efectos crónicos de la cocaína sobre el sistema arterial periférico, no hay casos publicados de tal complicación en ausencia de otros factores de riesgo. Se presenta el caso de una mujer de 22 años de edad con antecedentes de consumo de cocaína intranasal de 3 gramos por semana durante un año, que consultó por claudicación intermitente a los 200 metros asociada a dolor y parestesias en miembro inferior izquierdo de 2 meses de evolución. El ecodoppler arterial evidenció una estenosis mayor del 70% en la arteria femoral superficial izquierda. Se realizaron estudios complementarios descartando otras etiologías probables. Se inició tratamiento con ácido acetilsalicílico, cilostazol y ejercicio reglado, asociado a terapia de apoyo para mantenimiento del cese del consumo de cocaína, con buena respuesta. Se destaca la importancia de la difusión de información a los pacientes, dado que la mayoría de la población desconoce las complicaciones cardiovasculares de dicha adicción. Es indispensable indagar sobre el consumo de cocaína en pacientes jóvenes con arteriopatía sin factores de riesgo aparentes.

  16. Distribuição de água no solo aplicado por gotejamento enterrado e superficial Soil water distribution for subsurface and surface drip irrigation

    Directory of Open Access Journals (Sweden)

    Allan C. Barros

    2009-12-01

    Full Text Available Devido à falta de estudos sobre o movimento da água quando aplicada abaixo da superfície, realizou-se este trabalho com o objetivo de avaliar a distribuição de água aplicada pelo sistema de gotejamento enterrado e convencional. O experimento de campo foi conduzido na área experimental do Departamento de Engenharia Rural da ESALQ/USP - Piracicaba, SP. Para o estudo, trincheiras foram abertas e instaladas sondas de TDR, dispostas a 0,05; 0,15; 0,25; 0,35 e 0,45 m profundidade, e a 0,05; 0,15; 0,25; 0,35 m comprimento, totalizando 17 sondas por trincheira. Os tratamentos foram baseados na profundidade de aplicação (0,0 e 0,10 m e vazão aplicada (2 e 4 L h-1: ENT2; ENT4; SUP2 e SUP4. A cada hora era aplicado 1 L de água (total de 10 L, seguida de leituras com o TDR. Medições do disco úmido e saturado foram feitas com régua milimetrada; além disso, estabeleceu-se um volume controle onde foi avaliada a uniformidade de aplicação; assim, foi possível verificar, em relação aos sistemas superficiais, que os sistemas enterrados apresentaram menor área superficial molhada e atingiram maior largura e profundidade; já as maiores concentrações foram obtidas próximas ao ponto de emissão.Studies of sub-surface water movement is an interesting topic in irrigation but, in spite of the its importance, there is little literature. One of the purposes of this study was to contribute to this subject and evaluate the distribution of water applied by both subsurface drip irrigation (SDI and conventional irrigation. Experiments were conducted at the Department of Rural Engineering (ESALQ/USP, located at Piracicaba, SP. Trenches were opened and 17 three-rod TDR probes were installed, placed at 0.05, 0.15, 0.25, 0.35 and 0.45 m depths, and to 0.05, 0.15, 0.25, 0.35 m intervals. This procedure was repeated using a dripper buried at 0 and 0.10 m for each discharge rate of 2 and 4 L h-1 tested. Wetted soil volume was observed with 1 L of water

  17. Avaliação da biodegradação de parafinas e da produção de biosurfactante por Bacillus subtilis na presença de petróleo Evaluation of paraffins biodegradation and biosurfactant production by Bacillus subtilis in the presence of crude oil

    Directory of Open Access Journals (Sweden)

    Carmen Lucia Queiroga

    2003-12-01

    Full Text Available Os experimentos com Bacillus subtilis para avaliação da tensão superficial foram realizados com meio de cultivo contendo como nutrientes básicos 0,4% de ions nitrato e 4% de glicose, na presença de petróleo. A produção de surfactina foi observada pela redução da tensão superficial do meio de cultura fermentado. Surfactina foi isolada a partir do meio de cultura fermentado por B. subtilis, por precipitação ácida seguida de extração com clorofórmio-metanol. A avaliação da composição dos alcanos lineares (parafinas foi realizada por cromatografia gasosa. Observamos uma significativa redução da tensão superficial do meio de cultura indicando que a produção de biosurfactante não foi inibida pela presença de parafina, e que as parafinas leves podem ter sido consumidas.Bacillus subtilis experiments for surface tension evaluation were accomplished with culture medium containing 0.4% nitrate ions and 4% glucose basic nutrient in the presence of crude oil. Surfactin production was observed by surface tension reduction of the culture broth. Surfactin was isolated from Bacillus subtilis fermented broth, by acid-precipitation followed by extraction with chloroform-methanol. Evaluation of the linear alkanes composition was performed by capillary gas chromatography. We observed a significant reduction of the surface tension of the fermented broth indicating that the biosurfactant production was not inhibited by the crude oil presence, and that the light paraffins might have been consumed.

  18. ESCORRENTÍA SUPERFICIAL EN BOSQUES MONTANOS NATURALES Y PLANTADOS DE PIEDRAS BLANCAS, ANTIOQUIA (COLOMBIA SURFACE RUNOFF IN NATURAL MONTANE FORESTS AND FOREST PLANTATIONS IN ANTIOQUIA, COLOMBIA

    Directory of Open Access Journals (Sweden)

    Oscar Andrés Ruiz Suescún

    2005-06-01

    Full Text Available En bosques montanos naturales de roble (Quercus humboldtii Bonpl. y plantados de pino pátula (Pinus patula Schltdl. & Cham. y ciprés (Cupressus lusitanica Mill. de la región de Piedras Blancas, Antioquia (Colombia, fueron medidos los flujos de escorrentía superficial (ES por un periodo de tiempo de 16 meses. Se implementaron parcelas cerradas de escorrentía superficial de 10 m de largo x 2 m de ancho, tanques colectores y sistemas de registro volumétrico. Los flujos fueron de 23,19 mm año-1 (1,07 % de la precipitación para la cobertura de roble; 35,13 mm año-1 (1,61 % de la precipitación para la cobertura de pino pátula y 230,64 mm año-1 (11,05 % de la precipitación para la cobertura de ciprés. Mediante análisis de componentes principales (ACP se identificaron las relaciones existentes entre las variables hidrológicas y los flujos de ES, y por medio de análisis de regresión lineal múltiple se ajustaron modelos para los flujos de ES por cobertura en función de la precipitación, la precipitación en el bosque y la intensidad de lluvia promedio, variables que mostraron alta relación con la ES según el ACP.In natural montane oak forests (Quercus humboldtii Bonpl., in pine (Pinus patula Schltdl. & Cham. and cypress (Cupressus lusitanica Mill. plantations in Piedras Blancas, Antioquia (Colombia, surface runoff flows (SRF were measured over 16 months. Runoff was measured using 10 m long x 2 m wide runoff bounded plots, collector tanks and a volumetric counter system. SRF were 23,19 mm year -1 (1,07 % of rainfall for oak forest; 35,13 mm year -1 (1,61 % of rainfall for pine and 230,64 mm year-1 (11,05 % of rainfall for cypress plantations. Relationships between hydrological variables and SRF were identified by a principal components analysis (PCA. For each one of the stands, multiple regression analysis was used to fit models of SRF on rainfall, throughfall and mean intensity of rainfall, variables that, according to the PCA

  19. Superficial temporal artery flap for reconstruction of complex facial defects: A new algorithm

    Directory of Open Access Journals (Sweden)

    Tarek M. Elbanoby

    2018-03-01

    Full Text Available Background A variety of island flaps can be based on the superficial temporal artery with variable tissue composition. They can be used for defect reconstruction, cavity resurfacing, facial hair restoration, or contracture release. Methods Seventy-two patients underwent facial reconstruction using a superficial temporal artery island flap from October 2010 to October 2014. The defects had various etiologies, including trauma, burns, tumors, exposed hardware, and congenital causes. We classified the patients by indication into 5 groups: cavity resurfacing, contracture release, facial hair restoration, skin coverage, and combined. The demographic data of the patients, defect characteristics, operative procedures, postoperative results, and complications were retrospectively documented. The follow-up period ranged from 24 to 54 months. Results A total of 24 females and 48 males were included in this study. The mean age of the patients was 33.7±15.6 years. The flaps were used for contracture release in 13 cases, cavity resurfacing in 10 cases, skin coverage in 17 cases, facial hair restoration in 19 cases, and combined defects in 13 cases. No major complications were reported. Conclusion: Based on our experiences with the use of superficial temporal artery island flaps, we have developed a detailed approach for the optimal management of patients with composite facial defects. The aim of this article is to provide the reader with a systematic algorithm to use for such patients.

  20. Detection of abnormalities in the superficial zone of cartilage repaired using a tissue engineered construct derived from synovial stem cells

    Directory of Open Access Journals (Sweden)

    W Ando

    2012-09-01

    Full Text Available The present study investigated the surface structure and mechanical properties of repair cartilage generated from a tissue engineered construct (TEC derived from synovial mesenchymal stem cells at six months post-implantation compared to those of uninjured cartilage. TEC-mediated repair tissue was cartilaginous with Safranin O staining, and had comparable macro-scale compressive properties with uninjured cartilage. However, morphological assessments revealed that the superficial zone of TEC-mediated tissue was more fibrocartilage-like, in contrast to the middle or deep zones that were more hyaline cartilage-like with Safranin O staining. Histological scoring of the TEC-mediated tissue was significantly lower in the superficial zone than in the middle and deep zones. Scanning electron microscopy showed a thick tangential bundle of collagen fibres at the most superficial layer of uninjured cartilage, while no corresponding structure was detected at the surface of TEC-mediated tissue. Immunohistochemical analysis revealed that PRG4 was localised in the superficial area of uninjured cartilage, as well as the TEC-mediated tissue. Friction testing showed that the lubrication properties of the two tissues was similar, however, micro-indentation analysis revealed that the surface stiffness of the TEC-repair tissue was significantly lower than that of uninjured cartilage. Permeability testing indicated that the TEC-mediated tissue exhibited lower water retaining capacity than did uninjured cartilage, specifically at the superficial zone. Thus, TEC-mediated tissue exhibited compromised mechanical properties at the superficial zone, properties which need improvement in the future for maintenance of long term repair cartilage integrity.

  1. Detection of abnormalities in the superficial zone of cartilage repaired using a tissue engineered construct derived from synovial stem cells.

    Science.gov (United States)

    Ando, Wataru; Fujie, Hiromichi; Moriguchi, Yu; Nansai, Ryosuke; Shimomura, Kazunori; Hart, David A; Yoshikawa, Hideki; Nakamura, Norimasa

    2012-09-28

    The present study investigated the surface structure and mechanical properties of repair cartilage generated from a tissue engineered construct (TEC) derived from synovial mesenchymal stem cells at six months post-implantation compared to those of uninjured cartilage. TEC-mediated repair tissue was cartilaginous with Safranin O staining, and had comparable macro-scale compressive properties with uninjured cartilage. However, morphological assessments revealed that the superficial zone of TEC-mediated tissue was more fibrocartilage-like, in contrast to the middle or deep zones that were more hyaline cartilage-like with Safranin O staining. Histological scoring of the TEC-mediated tissue was significantly lower in the superficial zone than in the middle and deep zones. Scanning electron microscopy showed a thick tangential bundle of collagen fibres at the most superficial layer of uninjured cartilage, while no corresponding structure was detected at the surface of TEC-mediated tissue. Immunohistochemical analysis revealed that PRG4 was localised in the superficial area of uninjured cartilage, as well as the TEC-mediated tissue. Friction testing showed that the lubrication properties of the two tissues was similar, however, micro-indentation analysis revealed that the surface stiffness of the TEC-repair tissue was significantly lower than that of uninjured cartilage. Permeability testing indicated that the TEC-mediated tissue exhibited lower water retaining capacity than did uninjured cartilage, specifically at the superficial zone. Thus, TEC-mediated tissue exhibited compromised mechanical properties at the superficial zone, properties which need improvement in the future for maintenance of long term repair cartilage integrity.

  2. Composição química e resistência mecânica da base de braquetes "Straight-Wire" Superficial hardness and the metallographic characteristics of straight-wire base brackets

    Directory of Open Access Journals (Sweden)

    Luciana de Paula Gontijo

    2004-08-01

    Full Text Available Esse trabalho objetivou comparar as durezas superficiais e as características metalográficas das bases de braquetes "straight-wire" de quatro marcas comerciais: Morelli, Abzil Lancer, Unitek e A-Company. As durezas superficiais foram avaliadas por meio de um teste de dureza realizado com o auxílio de um microdurômetro. Os resultados indicaram diferenças entre as marcas comerciais testadas onde os braquetes da A-Company apresentaram os valores mais altos de dureza (314 HV, seguidos da Unitek (325 HV, Abzil (230 HV e Morelli (192 HV. As características metalográficas das bases de braquetes foram avaliadas por meio de um espectrômetro, onde observou-se a presença de elementos de liga como o cromo, o níquel, o silício, o cobre, o alumínio, o enxofre e o nióbio. A quantidade de cada elemento de liga variou entre as marcas, provavelmente devido ao processo de fabricação industrial, mas sem interferir na qualidade final da liga.The objective of this study was to compare the superficial hardness and the metallographic characteristics of the bases of straight-wire brackets. Brackets from four different manufactures were utilized: Morelli, Abzil Lancer, Unitek and A-Company. The superficial hardness test revealed that the A-Company bracket base had the highest value (314 HV followed by Unitek (325 HV, Abzil (230 HV and Morelli (192 HV. The presence of variable amounts of chrome, nickel, silicon, copper, aluminum, sulfur and niobium was detected by the spectrometer. The quantity of each element varied according to the brand tested and did not interfere with the quality of the alloy. This variance was most likely due to differences in the process of the fabrication of each manufactures.

  3. Secondary superficial siderosis of the central nervous system in a patient presenting with sensorineural hearing loss

    International Nuclear Information System (INIS)

    Lemmerling, M.; De Praeter, G.; Mollet, P.; Mortele, K.; Kunnen, M.; Mastenbroek, G.

    1998-01-01

    We present a 50-year-old man who was investigated for sensorineural hearing loss. On MRI of the brain superficial siderosis of the central nervous system was seen, while MRI of the spine revealed an ependymoma of the cauda equina. This case illustrates the importance of performing T2-weighted imaging of the brain and posterior fossa when sensorineural hearing loss is present. Spine imaging is mandatory when superficial siderosis of the brain is diagnosed without identification of a bleeding source in the brain. (orig.)

  4. H3+: superficies de energía potencial, estados y transiciones rovibracionales

    Science.gov (United States)

    Aguado, M. Paniagua Y. A.

    Hemos calculado varias superficies globales de energía potencial para el estado fundamental y excitados del sistema H3+ en más de ocho mil geometrías diferentes usando una base (9s 3p 1d)/[4s 3p 1d] en cada átomo de Hidrógeno y mediante un método de cálculo de interacción de configuraciones completa (FCI). Hemos ajustado las superficies a formas analíticas del tipo Aguado y Paniagua con un error promedio menor de 50 cm-1 y menor en el pozo de potencial del estado fundamental. Finalmente hemos calculado y analizado los niveles vibracionales para los dos estados electrónicos más bajos, siendo la desviación respecto de los mejores valores publicados, tanto experimentales como teóricos, de unos pocos números de onda.

  5. Validation of a high-power, time-resolved, near-infrared spectroscopy system for measurement of superficial and deep muscle deoxygenation during exercise.

    Science.gov (United States)

    Koga, Shunsaku; Barstow, Thomas J; Okushima, Dai; Rossiter, Harry B; Kondo, Narihiko; Ohmae, Etsuko; Poole, David C

    2015-06-01

    Near-infrared assessment of skeletal muscle is restricted to superficial tissues due to power limitations of spectroscopic systems. We reasoned that understanding of muscle deoxygenation may be improved by simultaneously interrogating deeper tissues. To achieve this, we modified a high-power (∼8 mW), time-resolved, near-infrared spectroscopy system to increase depth penetration. Precision was first validated using a homogenous optical phantom over a range of inter-optode spacings (OS). Coefficients of variation from 10 measurements were minimal (0.5-1.9%) for absorption (μa), reduced scattering, simulated total hemoglobin, and simulated O2 saturation. Second, a dual-layer phantom was constructed to assess depth sensitivity, and the thickness of the superficial layer was varied. With a superficial layer thickness of 1, 2, 3, and 4 cm (μa = 0.149 cm(-1)), the proportional contribution of the deep layer (μa = 0.250 cm(-1)) to total μa was 80.1, 26.9, 3.7, and 0.0%, respectively (at 6-cm OS), validating penetration to ∼3 cm. Implementation of an additional superficial phantom to simulate adipose tissue further reduced depth sensitivity. Finally, superficial and deep muscle spectroscopy was performed in six participants during heavy-intensity cycle exercise. Compared with the superficial rectus femoris, peak deoxygenation of the deep rectus femoris (including the superficial intermedius in some) was not significantly different (deoxyhemoglobin and deoxymyoglobin concentration: 81.3 ± 20.8 vs. 78.3 ± 13.6 μM, P > 0.05), but deoxygenation kinetics were significantly slower (mean response time: 37 ± 10 vs. 65 ± 9 s, P ≤ 0.05). These data validate a high-power, time-resolved, near-infrared spectroscopy system with large OS for measuring the deoxygenation of deep tissues and reveal temporal and spatial disparities in muscle deoxygenation responses to exercise. Copyright © 2015 the American Physiological Society.

  6. [B_Erandio_Martiartu] Documentación del conjunto formado por la Torre de Martiartu y la ermita de San Antonio (Erandio, Bizkaia)

    OpenAIRE

    Álvarez González, Irantzu; Lopetegi Galarraga, Ane; Mesanza Moraza, Amaia; Rodríguez Miranda, Álvaro; Valle Melón, José Manuel

    2002-01-01

    [ES] El conjunto está formado por la torre de Martiartu (de unas 16 x 16 metros de planta), la pequeña ermita de la San Antonio y el área circundante. La documentación de la torre se realiza mediante fotogrametría estereoscópica y rectificación fotográfica para la obtención de las ortoimágenes. La ermita de San Antonio y el entorno se ha documentado mediante estación total y mallado para crear un modelo de superficies tridimensional. Posteriormente se presentan los modelos 3D y la colecció...

  7. Canine lacrimal and third eyelid superficial glands’ macroscopic and morphometric characteristics Aspectos macroscópicos e morfométricos das glândulas lacrimal e superficial da terceira pálpebra de cães (Canis familiares; LINNAEUS, 1758

    Directory of Open Access Journals (Sweden)

    Vânia Pais Cabral

    2005-04-01

    Full Text Available The lacrimal and third eyelid superficial glands produce the aqueous component of the preocular tear film. In this research, morphologic and morphometric assessments of the parenchyma and stroma of both lacrimal glands of healthy adult mongrel dogs were performed. Both lacrimal and third eyelid glands of fourteen dogs were collected, summing fifty-six samples. The macroscopic and morphometric data were statistically analyzed, according to the glandular type (lacrimal and third eyelid superficial glands and sexual dimorphism (male or female. The lacrimal glands were significantly larger and longer than the superficial glands of the third eyelid. Expressive morphometric differences of interlobular duct, lymphocytic infiltration, interlobular vessels and secretory parenchyma between the two glandular types were encountered. The lacrimal glands from the male subjects were significantly larger than those from female ones, as well as the superficial glands of the third eyelid were thicker. The higher lymphocyte infiltration and poorer secretor parenchyma in female dogs may be one of the reasons for the higher incidence of keratoconjunctiviti sicca (KCS in such canine population.As glândulas lacrimal e superficial da terceira pálpebra atuam produzindo o componente aquoso do filme lacrimal. Nesta pesquisa, estudaram-se aspectos morfológicos e morfométricos do parênquima e do estroma de ambas as glândulas em cães mestiços, hígidos, adultos (machos ou fêmeas. As glândulas lacrimal e superficial da terceira pálpebra de 14 cães foram colhidas, totalizando 56 amostras. Foram estudadas, à estatística, as variáveis macroscópicas e morfométricas, comparando-as quanto ao tipo glandular (lacrimal e superficial da terceira pálpebra e quanto ao dimorfismo sexual (macho e fêmea. Às glândulas lacrimais foram significativamente maiores comparativamente as superficiais da terceira pálpebra. Foram evidenciados diferenças morfom

  8. Antibody conjugate radioimmunotherapy of superficial bladder cancer

    International Nuclear Information System (INIS)

    Perkins, Alan; Hopper, Melanie; Murray, Andrea; Frier, Malcolm; Bishop, Mike

    2002-01-01

    The administration of antibody conjugates for cancer therapy is now proving to be of clinical value. We are currently undertaking a programme of clinical studies using the monoclonal antibody C 595 (gG3) which reacts with the MUC1 glycoprotein antigen that is aberrantly expressed in a high proportion of bladder tumours. Radio immuno conjugates of the C 595 antibody have been produced with high radiolabelling efficiency and immuno reactivity using Tc-99 m and In-111 for diagnostic imaging, and disease staging and the cytotoxic radionuclides Cu-67 and Re-188 for therapy of superficial bladder cancer. A Phase I/II therapeutic trail involving the intravesical administration of antibody directly into the bladder has now begun. (author)

  9. PRE-COMPACTACIÓN Y ACONDICIONAMIENTO ORGANICO PARA LA RECULTIVACIÓN DE UN SUELO DE TEXTURA GRUESA (TYPIC XEROCHREPTS) DISTURBADO POR EXTRACCIÓN DE ÁRIDOS

    OpenAIRE

    Seguel, Oscar; Rodríguez, Natalia; Soto, Lely; Homer, Ian; Benavides, Carlos; Casanova, Manuel; Haberland, Julio

    2017-01-01

    RESUMEN La extracción de áridos genera un daño a la estructura del suelo superficial, disminuyendo su capacidad de soporte. Con el objeto de recuperar un suelo agrícola (Typic Xerochrepts, franco arenoso) disturbado por extracción de arenas sub-superficiales, se desarrolló un estudio en la zona central de Chile, en macetas de 20 L, estableciendo tratamientos con dos factores: pre-compactación (sin y con dos niveles crecientes) e incorporación de enmienda orgánica (cama broiler en dosis de 0, ...

  10. What factors control the superficial lava dome explosivity?

    Science.gov (United States)

    Boudon, Georges; Balcone-Boissard, Hélène; Villemant, Benoit; Morgan, Daniel J.

    2015-04-01

    Dome-forming eruption is a frequent eruptive style; lava domes result from intermittent, slow extrusion of viscous lava. Most dome-forming eruptions produce highly microcrystallized and highly- to almost totally-degassed magmas which have a low explosive potential. During lava dome growth, recurrent collapses of unstable parts are the main destructive process of the lava dome, generating concentrated pyroclastic density currents (C-PDC) channelized in valleys. These C-PDC have a high, but localized, damage potential that largely depends on the collapsed volume. Sometimes, a dilute ash cloud surge develops at the top of the concentrated flow with an increased destructive effect because it may overflow ridges and affect larger areas. In some cases, large lava dome collapses can induce a depressurization of the magma within the conduit, leading to vulcanian explosions. By contrast, violent, laterally directed, explosions may occur at the base of a growing lava dome: this activity generates dilute and turbulent, highly-destructive, pyroclastic density currents (D-PDC), with a high velocity and propagation poorly dependent on the topography. Numerous studies on lava dome behaviors exist, but the triggering of lava dome explosions is poorly understood. Here, seven dome-forming eruptions are investigated: in the Lesser Antilles arc: Montagne Pelée, Martinique (1902-1905, 1929-1932 and 650 y. BP eruptions), Soufrière Hills, Montserrat; in Guatemala, Santiaguito (1929 eruption); in La Chaîne des Puys, France (Puy de Dome and Puy Chopine eruptions). We propose a new model of superficial lava-dome explosivity based upon a textural and geochemical study (vesicularity, microcrystallinity, cristobalite distribution, residual water contents, crystal transit times) of clasts produced by these key eruptions. Superficial explosion of a growing lava dome may be promoted through porosity reduction caused by both vesicle flattening due to gas escape and syn-eruptive cristobalite

  11. Efficacy and safety of superficial chemical peeling in treatment of active acne vulgaris.

    Science.gov (United States)

    Al-Talib, Hassanain; Al-Khateeb, Alyaa; Hameed, Ayad; Murugaiah, Chandrika

    2017-01-01

    Acne vulgaris is an extremely common condition affecting the pilosebaceous unit of the skin and characterized by presence of comedones, papules, pustules, nodules, cysts, which might result in permanent scars. Acne vulgaris commonly involve adolescents and young age groups. Active acne vulgaris is usually associated with several complications like hyper or hypopigmentation, scar formation and skin disfigurement. Previous studies have targeted the efficiency and safety of local and systemic agents in the treatment of active acne vulgaris. Superficial chemical peeling is a skin-wounding procedure which might cause some potentially undesirable adverse events. This study was conducted to review the efficacy and safety of superficial chemical peeling in the treatment of active acne vulgaris. It is a structured review of an earlier seven articles meeting the inclusion and exclusion criteria. The clinical assessments were based on pretreatment and post-treatment comparisons and the role of superficial chemical peeling in reduction of papules, pustules and comedones in active acne vulgaris. This study showed that almost all patients tolerated well the chemical peeling procedures despite a mild discomfort, burning, irritation and erythema have been reported; also the incidence of major adverse events was very low and easily manageable. In conclusion, chemical peeling with glycolic acid is a well-tolerated and safe treatment modality in active acne vulgaris while salicylic acid peels is a more convenient for treatment of darker skin patients and it showed significant and earlier improvement than glycolic acid.

  12. INFLUENCIA DE LA NITRURACIÓN POR PLASMA SOBRE EL COMPORTAMIENTO A LA CORROSIÓN Y LA ADHESIÓN DE RECUBRIMIENTOS DLC SOBRE ACERO INOXIDABLE AISI 420

    Directory of Open Access Journals (Sweden)

    Jorge N. Pecina

    2016-01-01

    Full Text Available En este trabajo se estudió el comportamiento a la corrosió n y la adhesión de dos rec ubrimientos DLC (“Diamond Like Carbon ” , “Soft” y “Hard”, depositados por PACVD (“Plasma Assisted Chemical Vapour Deposition” sobre acero AISI 420, templado y revenido y /o nitrurado por plasma . Se analizaron por espectroscopía Raman y midió dureza en superficie. Se observó la microestructura por OM y SEM. Se realizaron pruebas de adhesión con indentación Rockwell C . S e practicaron ensayos de Niebla Salina e inmersión en HCl . Los DLC “ Soft ” presentaron una dureza de 5 00 HV y un espesor de 2 0 μm , mientras que los “ Hard ” tuvieron 1400 HV y 2 ,5 μm. Ambos recubrimientos presentaron bajo coeficiente de fricción y buena adhesión sobre el sustrato nitrurado . También presentaron buena resistencia a la corrosión atmosférica. En HCl el DLC retardó la degradación que se presentó rápidamente en las muestras sin recubrir.

  13. Evaluación de la colmatación de una membrana mediante medidas eléctricas y de la composición química de su superficie

    Directory of Open Access Journals (Sweden)

    Benavente, J.

    2000-08-01

    Full Text Available Adsorption of charged macromolecules on the surface of a membrane in microfiltration processes produces membrane fouling and, as a result of this, a reduction in the flow across the membrane. Membrane fouling can be easyly detected by variation of: i electrochemical parameters such as electrical resistance and salt permeability, which are directly related to the porosity of the membrane; ii atomic concentrations of characteristic elements of the membrane surface, which can be determined by X-ray Photoelectron spectroscopy (XPS. For alumina commercial membranes (Anopore™, 0.1 μm pore size in contact with salt solutions containing 0.5 g/l bovine serum albumin (BSA, electrochemical parameters indicate a decrease around 50% for membrane porosity. XPS results show: i the adsorbed layer of protein on the membrane surface does not directly increase depending on the membrane-protein interaction time, since most of it is adsorbed in the first 24 h.; ii the protein layer does not uniformely cover the alumina membrane surface.

    La adsorción de macromoléculas cargadas sobre la superficie de una membrana en procesos de microfiltración produce la colmatación (o ensuciamiento de la membrana y, por tanto, una disminución del flujo a través de la membrana. La colmatación puede ser fácilmente detectada por la variación de: i parámetros electroquímicos como la resistencia eléctrica y la permeabilidad salina, directamente relacionados con la porosidad de las membranas; ii las concentraciones atómicas de los elementos característicos de la superficie de la membrana, determinadas mediante espectroscopía de fotoelectrones de rayos X (XPS. Para membranas comerciales de alúmina (Anopore™, 0.1 μm de tamaño de poro en contacto con disoluciones que contienen 0.5 g/l de seroalbúmina de bobino (BSA, los parámetros eléctroquímicos indican una disminución en la porosidad de la membrana del 50%, aproximadamente, despues de estar 72 h en

  14. Pediatric superficial scald burns--reassessment of our follow-up protocol.

    Science.gov (United States)

    Egro, Francesco M; O'Neill, Jennifer K; Briard, Robert; Cubison, Tania C S; Kay, Alan R; Estela, Catalina M; Burge, Timothy S

    2010-01-01

    The most common pediatric burn injury is a superficial scald. The current follow-up protocol for such burns includes review of the patient at 2 weeks postinjury and then 2 months later. The authors decided to review the protocol to assess the need for this second follow-up. A retrospective study reviewed the case notes of patients younger than 16 years at the time of their injury presenting with a scald over 5% TBSA. The progress of healing and scar development up to 5 years follow-up was assessed. This study showed that scalds healing within 2 weeks following injury rarely became hypertrophic. A prospective study was performed over a 10-month period. All children who suffered a superficial partial-thickness scald injury were included. At the 2-week appointment, the need for further follow-up was predicted. The accuracy of this prediction was assessed 2 months later. This study showed that an experienced member of the burns team could reliably predict at 2-week appointment those children who could be safely discharged with no subsequent need for scar management. This study suggests that it will be safe to modify the follow-up protocol, reducing the number of clinic attendances.

  15. Generación de superficies curvas utilizando el programa CADET

    Directory of Open Access Journals (Sweden)

    Recuero, Alfonso

    1987-02-01

    Full Text Available In this paper an extension to the CADET program, for the perspective drawing of 3— dimensional objects, is described. By means of this extension playing contours can be defined in their plane, which can subsequently be used in the generation of complex primitives. This contours may define the meridian curve of surfaces of revolution, the directive curve of conical or cilindrical surfaces, the borders of complicate plane elements, etc. The listings of the subroutines, written in HP-BASIC, are included together with a comprehensive explanation of how to use it in generating a complet object.

    En el presente trabajo se muestra una extensión del programa CADET, para el dibujo de perspectivas de objetos tridimensionales, mediante la cual es posible generar contornos planos descritos en su propio plano y que posteriormente sirven de base en la definición de primitivas complejas. Estos contornos pueden representar las meridianas de superficies de revolución, la directriz de superficies cilíndricas o cónicas, los bordes de elementos planos complicados, etc. Se incluyen los listados en HP-BASIC de las subrutinas de generación y dibujo de estos contornos, así como una descripción detallada de su utilización con un objeto completo.

  16. Superficial Spreading Melanoma „Slumbered“ Behind the Shadow of Onychomycosis

    Directory of Open Access Journals (Sweden)

    Trayanova E.

    2015-05-01

    Full Text Available Malignant melanoma is the most aggressive form of cutaneous cancer. Due to the continuously increasing rate of newly detected cases each year and because of its particular low survival rate, the scientific interest in this type of neoplasia is constantly growing. Sun exposure is identified as the major etiologic factor for malignant transformation of the melanocytes. According to the WHO, malignant melanoma is divided into four main groups, as the superficial spreading form is defined as the most “gentle” among them. The name of this subspecies does not have to “drowse” the attention of dermatologists considering the possible metastasic risk, even at a later stage. Due to lack of subjective complaints, patients do not seek active consultation on this occasion, as this type of lesions often remain missed within the clinical examination. Early diagnosis, however, as well as early surgical removal is the key to increasing the survival rate of the patients. We present a case of a 88 year-old female patient consulted with dermatologist on occasion of severe onychomycosis, as a pigment lesion on the anterior surface of the right leg. Clinically and dermatoscopically suspected superficial spreading melanoma was detected within the examination.

  17. Lactic acid peeling in superficial acne scarring in Indian skin.

    Science.gov (United States)

    Sachdeva, Silonie

    2010-09-01

    Chemical peeling with both alpha and beta hydroxy acids has been used to improve acne scarring with pigmentation. Lactic acid, a mild alpha hydroxy acid, has been used in the treatment of various dermatological indications but no study is reported in acne scarring with pigmentation. To evaluate the efficacy and safety of full strength pure lactic acid 92% (pH 2.0) chemical peel in superficial acne scarring in Indian skin. Seven patients, Fitzpatrick skin type IV-V, in age group 20-30 years with superficial acne scarring were enrolled in the study. Chemical peeling was done with lactic acid at an interval of 2 weeks to a maximum of four peels. Pre- and post-peel clinical photographs were taken at every session. Patients were followed every month for 3 months after the last peel to evaluate the effects. At the end of 3 months, there was definite improvement in the texture, pigmentation, and appearance of the treated skin, with lightening of scars. Significant improvement (greater than 75% clearance of lesions) occurred in one patient (14.28%), good improvement (51-75% clearance) in three patients (42.84%), moderate improvement (26-50% clearance) in two patients (28.57%), and mild improvement (1-25% clearance) in one patient (14.28%). © 2010 Wiley Periodicals, Inc.

  18. Espectroscopia Mössbauer e refinamento estrutural no sistema cerâmico isomórfico (alfa-Fe2O3-(alfa-Al2O 3 Mössbauer spectroscopy and structural refinement in the isomorphic (alpha-Fe2O3-( alpha-Al2O3 ceramic system

    Directory of Open Access Journals (Sweden)

    J. A. Moreto

    2007-06-01

    Full Text Available Os multiferróicos são materiais em que duas ou três propriedades tais como ferroeletricidade, ferromagnetismo e ferroelasticidade são observadas em uma mesma fase. Em particular, os multiferróicos magnetoelétricos representam os materiais que são simultaneamente (antiferromagnéticos e ferroelétricos, com ou sem ferroelasticidade. Especificamente, o sistema hematita (alfa-Fe2O3-alumina (alfa-Al2O3 tem sido estudado, principalmente devido às suas potencialidades para aplicações em metalurgia e como catalisador na síntese de amônia. Contudo, compostos deste sistema também podem apresentar efeitos magnetoelétricos. Neste trabalho um estudo estrutural do composto (alfa-Fe2O30,25(alfa-Al2O 30,75 submetido à moagem em altas energias e tratamento térmico pós-moagem é apresentado. As amostras foram caracterizadas por difração de raios X, refinamento estrutural Rietveld e espectroscopia Mössbauer. A determinação e identificação das fases cristalográficas, parâmetros de rede e volume de celas unitárias nas amostras moída e tratada termicamente permitiu verificar as mudanças dos parâmetros, a formação de espinélios e possíveis deformações relativas advindas do processo de moagem em altas energias.Multiferroics are materials in which two or all three of the properties, ferroelectricity, ferromagnetism, and ferroelasticity occur in the same phase. In particular, multiferroic magnetoelectrics represent the materials that are simultaneously ferromagnetic and ferroelectric, with or without ferroelasticity. Specifically, the hematite (alpha-Fe2O3-alumina (alpha-Al2O3 system has been studied, mainly due to its potential applications in metallurgy and as catalyst of ammonia synthesis. However, compounds of this system also may present magnetoelectric effects. In this work, a structural study of the high-energy ball milled and annealed (alpha-Fe2O3 0.25(alpha-Al2O30.75 compound was carefully conducted. The samples were

  19. Relación entre las capturas de Megapitaria squalida (Bivalvia: Veneridae y la temperatura superficial del mar en la Bahía de la Paz, Baja California Sur, México

    Directory of Open Access Journals (Sweden)

    Mariana Vázquez Hurtado

    2011-03-01

    Full Text Available La almeja chocolate Megapitaria squalida es un recurso pesquero con creciente importancia en el noroeste de México al registrarse un incremento en los volúmenes de captura. Sin embargo, esta pesquería ha observado variaciones importantes en las capturas que podrían estar relacionadas con factores ambientales. Se obtuvieron datos mensuales de producción de M. squalida durante 2002- 2005 y se estimaron series de tiempo de temperatura superficial del mar en la Bahía de La Paz B.C.S. a partir de imágenes mensuales derivadas del sensor MODIS-Aqua. Los resultados indican una relación positiva significativa entre la temperatura superficial del mar y los volúmenes de captura, razón por la cual nuestro trabajo tiene como objetivo estudiar las relaciones entre capturas de Megapitaria squalida (Bivalvia: Veneridae y la temperatura superficial del mar en La Bahía de la Paz, Baja California Sur, México.Megapitaria squalida (Bivalvia: Veneridae fishery landings and temperature relationship in Bahía de la Paz, México. The clam Megapitaria squalida is a fishing resource with increasing importance in Northwestern Mexico. Nevertheless, this fishery has shown important variations that could be related to environmental factors. To assess this, monthly landings of M. squalida were analyzed during 2002-2005 for Bahía de La Paz, B.C.S., and were related with monthly time series of sea surface temperature, derived from MODIS-Aqua Sensor. The results showed a positive and significant relationship between sea surface temperature and clam landings. The likely impact of anomalous conditions of sea temperature on this resource is discussed. Rev. Biol. Trop. 59 (1: 151-157. Epub 2011 March 01.

  20. Superficial ovarian cortex vascularization is inversely related to the follicle reserve in normal cycling ovaries and is increased in polycystic ovary syndrome.

    Science.gov (United States)

    Delgado-Rosas, F; Gaytán, M; Morales, C; Gómez, R; Gaytán, F

    2009-05-01

    The superficial ovarian cortex constitutes the micro-environment where resting and early growing follicles reside. As small follicles do not possess an independent capillary network, both their survival and early growth depend on their proximity to the cortical vessels. Little is known about the possible changes in superficial ovarian cortex vascularization in normal women throughout reproductive life or in pathological conditions such as polycystic ovary syndrome (PCOS) involving abnormal early follicle growth. We studied the vascularization of the superficial and deep cortical stroma (DCS) in normal cycling ovaries from 21 to 50 years of age and in infertile women with PCOS. We used archival ovarian samples and specific CD34 immunostaining to determine blood vessel density and to analyse correlation with age and with the ovarian follicle reserve. Normal cycling ovaries showed an age-related increase in the superficial cortical stroma vascularization that was inversely correlated with the density of small (primordial and primary) follicles. In contrast, blood vessel density in the DCS significantly decreased in women aged >or=40 years. Ovaries from PCOS showed a 2-fold increase in blood vessel density in both superficial cortical stroma and DCS with respect to age-matched controls. The increased vascularization of the superficial cortical stroma in normal ovaries in relation to age and in ovaries from PCOS could have profound effects on cortical metabolic rate, primordial follicle survival/activation and early follicle growth, and may underline changes in follicle dynamics in mid-aged women and in PCOS.

  1. Automatic and Deliberate Affective Associations with Sexual Stimuli in Women with Superficial Dyspareunia

    NARCIS (Netherlands)

    Brauer, Marieke; de Jong, Peter J.; Huijding, Jorg; Laan, Ellen; ter Kuile, Moniek M.

    Current views suggest that in women with superficial dyspareunia the prospect of penile-vaginal intercourse automatically activates fear-related associations. The automatic activation of negative associations is assumed to interfere with the development of sexual arousal. In turn, this may further

  2. Epidemiology of superficial and cutaneous mycosis in 5500 suspected patients in Tehran

    Directory of Open Access Journals (Sweden)

    Ayatollah Nasrollahi Omran

    2010-04-01

    Full Text Available "n Normal 0 false false false EN-US X-NONE AR-SA MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} Background: Identification of the determatophytosis species and superficial mycosis agents may be useful in directing the survey for environmental and animal sources of infection to educate the danger of acquiring infections from infected persons and other animals. Based on this background the identification of cutaneous mycosis distribution was the main purpose."n"nMethods: From March 2005 to Feb 2009 we examined 5500 patients suspected to superficial and cutaneous mycosis referred to medical mycology labs in Tehran, Iran for Medical Mycology examination. Skin, hair and nail sampling were taken by scraping from patients and collected for diagnosis. Diagnosis was confirmed by direct microscopy and culture according to the mycology routine laboratory methods."n"nResults: A total of 2271 cases (41.3% suffered from superficial and cutaneous mycosis. The most common infections were dermatophytosis 1279 cases (56.31%, Tinea Versicolor 356 cases (15.47%, Erythersma 283 cases (12.46%, cutaneous candidiosis 243 cases (10.7% and sacrophytic cutaneous mycosis 110 cases (4.83%. Tichophyton mentagrophytes was the most common etiological agent with 198 cases (41.56%. The most common clinical type of cutaneous candidiasis was

  3. Reconstrucción 3D usando superficies trianguladas dados contornos paralelos

    Directory of Open Access Journals (Sweden)

    Manuel Guillermo Forero

    2001-07-01

    Full Text Available El presente artículo muestra una técnica de triangulación empleada para la reconstrucción de superficies tridimensionales (3D a partir de contornos paralelos. Esta técnica es usada para el modelamiento de la cabeza y el cerebro a partir de imágenes de resonancia magnética (IRM.

  4. Fusarium musae as cause of superficial and deep-seated human infections.

    Science.gov (United States)

    Esposto, M C; Prigitano, A; Tortorano, A M

    2016-12-01

    BLAST analysis in GenBank of 60 Fusarium verticillioides clinical isolates using the sequence of translation elongation factor 1-alpha allowed the identification of four F. musae confirming that this species is not a rare etiology of superficial and deep infections and that its habitat is not restricted to banana fruits. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  5. Treatment of primary cutaneous anaplastic large cell lymphoma with superficial x-rays

    DEFF Research Database (Denmark)

    Jepsen, Malene E; Gniadecki, Robert

    2015-01-01

    The optimal radiation schedule for primary cutaneous anaplastic lymphoma (PCALCL) has not been investigated. We report here satisfactory outcomes of low-dose (16-20 Gy, 3-5 fractions), superficial X-ray radiation (40-50 kV) in a series of 10 patients with PCALCL. Only 1 patient developed a local...

  6. Cyclic testing of porcelain laminiate veneers on superficial enamel and dentin: Pressed vs. conventional layered porcelain

    Science.gov (United States)

    Tawde, Shweta

    Statement of Problem: Clinicians are inclined towards more aggressive teeth preparations to accommodate the thickness of the veneering material. The principle of conservative tooth preparation is compromised. Purpose: By using a conservative approach to treatment with porcelain veneers, long-lasting, esthetic and functional results may be achieved. Sacrificing as little tooth structure as possible and conserving the supporting tissues will facilitate prospective patients. Materials and Methods: Forty extracted human maxillary and mandibular canines were selected. The teeth were divided into one of two groups (pressable and stackable) and further subdivided according to tooth substrate (all-enamel or mixed enamel-dentin exposure). Twenty canine teeth were allotted to the pressable veneer group and 20 were allotted to the stackable veneer group. Of the 20 teeth in the pressable group, all were pressed with a lithium disilicate ceramic system (IPS e.max Press), 10 with labial tooth reduction of 0.3-0.5 mm maintaining superficial enamel (PEN) and the remaining 10 teeth with labial veneer reduction of 0.8-1.0 mm exposing superficial dentin (PDN). Of the 20 teeth in the stackable group, all were stacked/ layered with conventional feldspathic porcelain (Fortune; Williams/ Ivoclar); with labial veneer reduction of 0.3-0.5 mm maintaining superficial enamel (SEN) and the remaining 10 teeth with labial veneer reduction of 0.8-1.0 mm exposing superficial dentin (SDN). Silicon putty matrix was fabricated prior to teeth preparation to estimate the teeth reduction. The prepared facial reduction was limited to the incisal edge. No incisal or palatal/lingual reduction was performed. Impressions of the prepared teeth were taken in medium/light-bodied PVS. Master casts were made in Resin Rock. The stackable group specimens were made with fabricating refractory dies and after following the recommended steps of laboratory procedure, stackable veneers were processed. The pressable group

  7. Aproveitamento da água de umidificação de malte da moagem úmida como matéria prima na fabricação de cerveja Utilization of the wet milling malt steep water as raw material on brewing

    Directory of Open Access Journals (Sweden)

    Waldemar G. VENTURINI FILHO

    1999-05-01

    Full Text Available A água de umidificação de malte, resultante da moagem úmida, pode ser usada como matéria prima na fabricação de cerveja. Há, entretanto, cervejarias que descartam esse subproduto, e conseqüentemente, o extrato nele contido. Em função disso, o presente trabalho teve por objetivo avaliar a possibilidade de ganho de rendimento na mosturação e alterações nas características químicas e sensoriais da bebida, em virtude do uso dessa água. Cervejas do tipo Pilsen foram produzidas de duas formas: com e sem água de umidificação de malte. Utilizou-se como matéria prima malte, lúpulo, xarope de maltose, água destilada e água de umidificação de malte. O mosto foi produzido pelo processo de infusão, separado do bagaço de malte por filtração convencional e fervido durante 60 minutos. Após seu resfriamento e clarificação o mosto foi inoculado com levedura de baixa fermentação (1,3g/l, ps e colocado para fermentar a 10°C. A fermentação foi encerrada com 90% da atenuação limite. Em seguida, a cerveja foi engarrafada e maturada a 0°C por 14 dias. Os resultados mostraram que o aumento do rendimento de mosturação, em função do uso da água de umidificação de malte, foi estatisticamente não significativo. A utilização dessa água praticamente não alterou as características químicas e sensoriais da cerveja, havendo apenas um leve aumento na intensidade de cor da bebida (7,1 x 8,0 EBC. Considerando, no entanto, que a água de umidificação de malte obtida em nível industrial apresenta maior concentração de extrato em relação àquela produzida em laboratório, espera-se que o uso da primeira traga ganho de rendimento industrial sem alterações significativas nas características da cerveja.The wet milling malt steep water can be used as raw material on brewing. However, some breweries discard this water containing a certain amount of extract. Based on this fact, the aim of this work was to evaluate possible

  8. Estudio anatómico de la rama superficial del nervio radial, implicaciones quirúrgicas

    Directory of Open Access Journals (Sweden)

    Enrique Vergara Amador

    2010-07-01

    Full Text Available Antecedentes. Conocer la anatomía de la rama superficial del nervio radial, es indispensable para la adecuada práctica de cirugías que involucran la mano y la muñeca. Objetivo. Determinar las relaciones del nervio radial y sus ramas con el tubérculo de Lister, la apófisis estiloides del radio y la distribución en el dorso de la mano. Material y métodos. Se disecaron 25 piezas de cadáveres frescos. Se identificó la rama superficial del nervio radial y se midió la distancia entre la salida del nervio y la apófisis estiloides del radio. Se identificaron las ramas del nervio en el antebrazo distal y en la muñeca y se midieron respecto a la apófisis estiloides y al tubérculo de Lister. Resultados. La rama superficial del nervio radial emergió en la región dorsal y radial del tercio distal del antebrazo entre el músculo braquiradialis y el extensor carpis radialis longus, a una distancia de 8,45 cm proximal a la apófisis estiloides. Su primera rama de división discurrió palmar a la apófisis estiloides radial a una distancia promedio de 0,74 cm respecto a la misma. El tronco principal se dividió en varias ramas terminales así: proximal a la apófisis estiloides del radio (28%, a nivel de la misma (12% y distal (60%. El patrón de distribución de las ramas nerviosas en la base de los dedos más frecuente fue el del primero, segundo y el lado radial del tercer dedo (56%. Discusión. Este estudio mostró la gran variabilidad de la rama superficial del nervio radial en el dorso de la mano y la alta probabilidad de daño del mismo durante los procedimientos abiertos, artroscópicos o procedimientos percutáneos en la muñeca.

  9. Primary temporal region squamous cell carcinoma diagnosed by a superficial temporal artery biopsy

    DEFF Research Database (Denmark)

    Andersen, S A W; Kiss, K

    2015-01-01

    artery biopsy was performed. The histopathology revealed perineural invasion of squamous cell carcinoma (SCC). A thorough investigation revealed no other primary site for the SCC and the patient was treated with surgical excision. CONCLUSION: Malignancy is rarely found in superficial temporal artery...

  10. Superficial thrombophlebitis (Mondor′s Disease after breast augmentation surgery

    Directory of Open Access Journals (Sweden)

    Viana Giovanni Andre

    2008-01-01

    Full Text Available Although the aetiology of Mondor′s disease remains unclear, the most commonly cited cause is trauma of some sort. Although surgical trauma has frequently been quoted, reports that specifically implicate aesthetic breast surgery are unusual in the literature. In this article, the authors report a case of superficial thrombophlebitis of the anterolateral chest wall secondary to breast augmentation surgery in a woman, five months after the procedure. The authors performed an analysis of the disease′s main etiologic components and preponderant clinical aspects, and determined all appropriate therapeutic measures.

  11. Comportamiento a la Corrosión del Acero API X70 Soldado por el Proceso de Doble Arco Sumergido Inmerso en Diferentes Medios Corrosivos

    OpenAIRE

    Montes, Omar Francisco; Garcés, Rocío Saldaña; Reyes, Felipe A. Reyes; Robledo, Patricia del Carmen Zambrano; López, Francisco H. Estupiñán; Calderón, Facundo Almeraya

    2016-01-01

    Resumen Los aceros API X70 son aplicados en fabricación y construcción de tuberías para el transporte de hidrocarburos, sin embargo, a un lapso de tiempo se degradan debido al medio ambiente al cual están expuestos; influyendo en la velocidad y tipo de corrosión sobre las superficies del metal base (MB), zona afectada por el calor (ZAC) y zona de fusión (ZF). A fin de conocer y evaluar la susceptibilidad a la corrosión en uniones del acero API X70 sometido a diferentes medios corrosivos, vari...

  12. Verificación analítica para las determinaciones de cromo hexavalente en aguas por espectrofotometría

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Severiche Sierra

    2013-06-01

    Full Text Available En la actualidad la prestación de servicios analíticos de laboratorios, toma de forma ascendente más auge y utilidad. El efecto de un análisis de aguas es forjar resultados correctos y confiables, siendo la verificación de ensayos uno de los aspectos más importantes y factor clave para conseguir este propósito. La determinación de cromo hexavalente en aguas por colorimetría con la difenilcarbazida es la metodología analítica más usada y útil que se conoce en el ámbito científico técnico, principalmente, por su alta selectividad y también debatida por su reacción a las interferencias. En el presente estudio se hizo la valoración analítica del método espectrofotométrico para la determinación de cromo hexavalente en aguas; el objetivo de este trabajo fue confirmar correctamente la aplicación del método para el análisis de aguas. Se trabajaron muestras de diferentes tipos de agua: potable, residual y superficial, siguiéndose estrictamente los protocolos de verificación. Se encontraron resultados satisfactorios en precisión y exactitud con el fin de emitir resultados confiables y reales de la muestra analizada.

  13. Potencial biotecnológico de cunninghamella echinulata UCP 1297 na produção de biossurfactante por fermentação submersa

    OpenAIRE

    Nadielly Regina Andrade Silva

    2014-01-01

    Os biossurfactantes constituem uma classe de compostos obtidos por via microbiana com estrutura molecular anfifílica, responsáveis pela redução de tensão superficial e interfacial, com ampla aplicação no setor industrial alimentício, farmacêutico, cosmético, na biorremediação e na recuperação de petróleo. A busca de alternativas para o uso de resíduos torna a produção de biossurfactante mais competitiva e viável, minimizando os custos de produção e consequentemente os impactos no ambiente. Ne...

  14. Energía Azul: generación de potencia a través de la Ósmosis por Presión Retardada (PRO

    Directory of Open Access Journals (Sweden)

    Carlos Esteban Aristizabal Alzate

    2018-02-01

    Full Text Available La emisión de gases efecto invernadero, causadas por el uso de combustibles fósiles y el crecimiento exponencial de la humanidad, vuelca los esfuerzos hacia la búsqueda de fuentes de energía limpia y sostenible, que satisfagan las necesidades energéticas actuales y futuras. Por lo que es imperativo, investigar y desarrollar tecnologías que aprovechen las energías renovables, una de ellas es la Ósmosis por Presión Retardada (PRO, proceso que aprovecha el gradiente de salinidad entre dos soluciones para generar electricidad, ya que la mezcla de una solución salina de concentración alta con agua fresca disipa más de 2,2 MJ/m3 de agua dulce tratada. A escala industrial, se podría aprovechar la diferencia de salinidad entre ríos y mares, cerca de los estuarios. La aplicación, viabilidad y eficiencia del proceso y la tecnología PRO, dependen de las características de la membrana semipermeable, como la potencia por unidad de área, y las propiedades fisicoquímicas y de superficie de esta. En la actualidad, se utilizan membranas de acetato de celulosa, las cuales dan potencias (1W/m2. Sin embargo, se está investigando con membranas de materiales compuestos, como, por ejemplo, las basadas en grafeno, las cuales permiten un mayor flujo de agua y potencias superiores a 5 W/m2.

  15. Determinación mediante inmunohistoquímica de infección por virus de la fiebre amarilla y virus de la hepatitis b

    Directory of Open Access Journals (Sweden)

    Cecilia Morón C

    2003-03-01

    Full Text Available La inmunohistoquímica (IHQ constituye una herramienta para definir la etiología en el síndrome icterohemorrágico. Objetivo: Identificar mediante IHQ la presencia en hígado del antígeno de superficie de la hepatitis B y del virus de la fiebre amarilla. Materiales y métodos: Se incluyeron muestras de tejido hepático procedentes de 55 fallecidos por síndrome icterohemorrágico, remitidos entre enero de 2000 y diciembre de 2001 al Instituto Nacional de Salud, (Lima, Perú. Resultados: La prueba se realizó únicamente en 46 muestras, 33% (15/46 fueron diagnosticados por histopatología como fiebre amarilla, de ellos, 9 casos fueron positivos por IHQ para fiebre amarilla, siendo 2 de ellos también positivos para HBsAg. Histológicamente, se reportaron 6 casos como hepatitis con necrosis submasiva o masiva, que por IHQ fueron sólo 2 casos positivos para fiebre amarilla. En 39% (18/46 no se llegó al diagnóstico etiológico de la hepatitis, y finalmente hubo 2 casos con diagnóstico histopatológico de ádenocarcinoma hepático y sólo se obtuvo positividad por IHQ para HBsAg en uno. Conclusión: La IHQ es una alternativa para la confirmación diagnóstica de hepatitis B y fiebre amarilla.

  16. Síndrome de marcapasos por selección inadecuada del modo de estimulación

    Directory of Open Access Journals (Sweden)

    Carlos Manuel Angulo Elers

    Full Text Available Se presenta el caso clínico de un paciente de 52 años de edad que, a causa de una disfunción sintomática del nódulo sinusal, portaba un marcapasos permanente unicameral ventricular desde hacía 9 años, al cual se le había sustituido el generador por agotamiento de la batería. Un mes después del cambio el paciente acudió a la consulta especializada de Arritmias y Marcapasos en el Hospital Provincial Docente Clinicoquirúrgico "Saturnino Lora Torres" de Santiago de Cuba, por presentar síntomas de cansancio fácil, disnea, mareos y síncopes; se le indicaron electrocardiogramas de superficie que mostraron una conducción retrógrada ventriculoauricular y pseudofusiones. Teniendo en cuenta las manifestaciones clínicas y los hallazgos electrocardiográficos, se diagnosticó un síndrome de marcapasos y se decidió implantar un electrodo auricular y variar la modalidad de estimulación a la de doble cámara, como terapéutica efectiva para ello. Los síntomas desaparecieron y el paciente evolucionó favorablemente hasta su egreso de la institución hospitalaria

  17. Comparison of Narrowband Imaging with Autofluorescence Imaging for Endoscopic Visualization of Superficial Squamous Cell Carcinoma Lesions of the Esophagus

    Directory of Open Access Journals (Sweden)

    Haruhisa Suzuki

    2012-01-01

    Full Text Available Aim. To compare narrowband imaging (NBI and autofluorescence imaging (AFI endoscopic visualization for identifying superficial esophageal squamous cell carcinoma (SCC. Methods. Twenty-four patients with superficial esophageal carcinomas diagnosed at previous hospitals were enrolled in this study. Lesions were initially detected using white-light endoscopy and then observed with both NBI and AFI. Endoscopic images documented each method, and three endoscopists experienced in esophageal imaging retrospectively reviewed respective images of histologically confirmed esophageal SCCs. Images were assessed for quality in identifying superficial SCCs and rated as excellent, fair, or poor by the three reviewers with interobserver agreement calculated using kappa (κ statistics. Results. Thirty-one lesions histologically confirmed as superficial esophageal SCCs were detected in 24 patients. NBI images of 27 lesions (87% were rated as excellent, three as fair, and one as poor compared to AFI images of 19 lesions (61% rated as excellent, 10 as fair and two as poor (P<0.05. Moderate interobserver agreement (κ=0.42, 95% CI 0.24–0.60 resulted in NBI while fair agreement (κ=0.35, 95% CI 0.18–0.51 was achieved using AFI. Conclusion. NBI may be more effective than AFI for visualization of esophageal SCC.

  18. Development of the Platysma Muscle and the Superficial Musculoaponeurotic System (Human Specimens at 8–17 Weeks of Development

    Directory of Open Access Journals (Sweden)

    C. De la Cuadra-Blanco

    2013-01-01

    Full Text Available There is controversy regarding the description of the different regions of the face of the superficial musculoaponeurotic system (SMAS and its relationship with the superficial mimetic muscles. The purpose of this study is to analyze the development of the platysma muscle and the SMAS in human specimens at 8–17 weeks of development using an optical microscope. Furthermore, we propose to study the relationship of the anlage of the SMAS and the neighbouring superficial mimetic muscles. The facial musculature derives from the mesenchyme of the second arch and migrates towards the different regions of the face while forming premuscular laminae. During the 8th week of development, the cervical, infraorbital, mandibular, and temporal laminae are observed to be on the same plane. The platysma muscle derives from the cervical lamina and its mandibular extension enclosing the lower part of the parotid region and the cheek, while the SMAS derives from the upper region. During the period of development analyzed in this study, we have observed no continuity between the anlage of the SMAS and that of the superficial layer of the temporal fascia and the zygomaticus major muscle. Nor have we observed any structure similar to the SMAS in the labial region.

  19. Measurement system study using beta radiation for determining different paper superficial density

    International Nuclear Information System (INIS)

    Vieira, Thais Molina; Madi Filho, Tufic

    2000-01-01

    Radioisotopes are used now in some areas of the industry. For quality control purposes, they are used in non-destructive analysis (NDA) which is applied to the materials examination verifying if they are adequate to the patterns demanded by technical rules or the market. Gamma, beta or neutron radiation sources may be used to do NDA, depending on material to be analyzed and the industrial process. In this work, the study of measurement system applied to quality control area was conceived and, in the evaluation of the material in test, a radioactive beta source was used. A system was designed and mounted, using a plastic scintillator detector developed in the laboratories of the Centro de Tecnologia das Radiacoes from IPEN-CNEN/SP. Two beta sources were used in the operational test: 90 Sr/ 90 Y and 204 Tl. Measures were obtained using several paper samples with different superficial density in g/m 2 . With the results, an equation correlating the relative activity with the superficial density in g/m 2 was established. (author)

  20. Superficial inflammatory and primary neoplastic lymphadenopathy: diagnostic accuracy of power-doppler sonography

    International Nuclear Information System (INIS)

    Magarelli, N.; Guglielmi, G.; Savastano, M.; Toro, V.; Sborgia, M.; Fioritoni, G.; Mattei, P.A.; Steinbach, L.; Bonomo, L.

    2004-01-01

    Objective: To evaluate the sensitivity, specificity and diagnostic accuracy of a cut-off of the resistive index of 0.5 for the differentiation between inflammatory and neoplastic primary lymphadenopathies. Subjects and methods: We measured the resistive index of superficial enlarged lymph nodes in a total of 50 patients (29 males and 21 females; age range 12-72 years, mean age 41.6 year) using an ATL 5000 HDI. A resistive index greater than or equal to 0.5 indicated an inflammatory lymph node and a resistive index <0.5 was consistent with neoplastic primary lymphadenopathies. The gold standard was either surgical biopsy or lymph-node reduction seen with ultrasound examination after antibiotic therapy. Results: The sensitivity of the resistive index for distinguishing inflammatory from neoplastic lymphadenopathy was 84.6%, the specificity 100% and the diagnostic accuracy 95.7% (P<0.001, statistically significant). Conclusion: The results of this study indicate that power-Doppler using a resistive index cut-off of 0.5 was a valid technique for distinguising between inflammatory and primary neoplastic lymph nodes in patients with superficial lymphadenopathies

  1. Tensiones de contacto por el método de elementos finitos del acero AISI 1045 endurecido por rodillo

    Directory of Open Access Journals (Sweden)

    Fernández-Columbié, T.

    2012-02-01

    Full Text Available In this paper, the tense-deformational behavior is analyzed by means of simulation using the finite element method for AISI 1045 cold rolled deformed steel. ANYSYS V.10 software was used in this study. Revolution number, compressive strength and tool feed rate were the variables considered in the deformation process. They allowed determining the contact stress of the deformed material. The material used was 30 mm diameter and 100 mm length. Samples of 30 mm diameter and 3 mm thickness were prepared for the optical microscopic observation, which were compared to the results obtained from the simulation. The tensile status of the deformed samples was evaluated as from the reduction of the average size of the grains as per the strength applied. This study intends to show that the cold hardening method is a surface hardening option.

    En el trabajo se analiza el estado tenso-deformacional mediante la simulación por el método de los elemento finitos del acero AISI 1045 deformado en frío empleando rodillo simple, para ello se utilizó el software ANSYS V.10. En el proceso de deformación se consideran las variables número de revolución, la fuerza compresiva y el avance de la herramienta, lo que permitió determinar las tensiones de contacto del material deformado. El diámetro del material empleado fue de 30 mm con una longitud de 100 mm. Para la observación de la microscopía óptica, se prepararon muestras de 30 mm de diámetro por 3 mm de espesor, las que fueron comparadas con los resultados obtenidos de la simulación. El estado tensional de las muestras deformadas se evaluó a partir de la reducción del tamaño promedio de los granos según la fuerza empleada. Con el desarrollo del trabajo se trata de demostrar que el empleo del método de endurecimiento en frío es una alternativa de endurecimiento superficial.

  2. Determinação da concentração de ácido acético no vinagre por medidas de tensão superficial: uma atividade didática interdisciplinar com vistas à mediação semiótica

    Directory of Open Access Journals (Sweden)

    Marco Aurélio Alvarenga Monteiro

    2015-04-01

    Full Text Available http://dx.doi.org/10.5007/2175-7941.2015v32n1p253 No aprendizado das Ciências a mediação semiótica é essencial para que o aluno possa se apropriar das produções culturais da comunidade científica. Nesse trabalho foi apresentada uma atividade experimental para alunos do ensino médio com o objetivo de produzir situações nas quais uma mediação semiótica relacionada ao conceito de tensão superficial possa ocorrer. Neste contexto, foi utilizado o método do peso da gota para calcular a tensão superficial do vinagre de álcool e, a partir do valor encontrado foi possível avaliar a concentração de ácido acético que este contém.

  3. Efectos del entrenamiento en superficies inestables sobre el equilibrio y funcionalidad en adultos mayores

    Directory of Open Access Journals (Sweden)

    Juan C. López S

    2015-02-01

    Full Text Available Objetivo: determinar los efectos de un programa de ocho semanas de entrenamiento en superficies inestables con y sin trabajo de fuerza, sobre el equilibrio y la capacidad funcional en adultos mayores de 60 años, pertenecientes al programa “Escuelas populares del deporte” del inder Medellín. Metodología: se llevó a cabo un estudio experimental simple, ciego y enmascarado con asignación al azar de 34 sujetos a dos grupos de intervención con y sin trabajo de fuerza sobre superficies inestables; se midió el equilibrio unipodal, bipodal con ojos abiertos y cerrados, además de pruebas funcionales como Up and Go, arm curl y chair test. Resultados: las intervenciones con y sin trabajo de fuerza mejoraron el equilibrio total en 57,0 y 69,5 segundos respectivamente, sin diferencias estadísticamente significativas en la comparación entre los grupos (p = 0,13. Se mejoró la velocidad de la marcha con ambas intervenciones sin diferencias intragrupos estadísticamente significativas (p = 0,33 pero importantes para la práctica. Conclusión: ambas intervenciones mejoran el equilibrio, sin embargo existen diferencias importantes para la práctica a favor del programa sobre superficies inestables sin trabajo de fuerza, pues la intervención tiene un mejor efecto sobre el equilibrio unipodal y bipodal tanto con ojos abiertos como con cerrados.

  4. Profundidade superficial e superficialidade profunda: O dilema da pesquisa em ciências humanas entre a disciplinaridade e a interdisciplinaridade

    Directory of Open Access Journals (Sweden)

    Cláudio Clécio Vidal Eufrausino

    2008-06-01

    Full Text Available O objetivo deste artigo é discutir a necessidade de repensar o conflito entre disciplinaridade e interdisciplinaridade como se fossem opostos irreconciliáveis. Tentamos demonstrar que a riqueza das ciências humanas cresce através do confronto aberto entre estas duas modalidades de pesquisa, a fim de serem preenchidas as lacunas de ambas. Por meio desta análise, procuramos dar um novo significado para os termos superficialidade e profundidade, tentando superar a antiga oposição que considera profundidade como uma coisa boa em oposição ao caráter superficial. Ao fazermos isto, estamos revendo, com auxílio da teoria de Carlo Ginsburg, a oposição entre retórica e prova, ou, em outros termos, entre factualidade e demonstração argumentativa. Através do enfrentamento dos limites tanto da disciplinaridade quanto da interdisciplinaridade, tentamos apontar novas direções científicas, mostrando soluções marcantes não pelo poder que contêm em si mesmas, mas pela capacidade delas de estimular uma freqüente revisão dos paradigmas das ciências.

  5. MRI of superficial soft tissue masses: analysis of features useful in distinguishing between benign and malignant lesions

    Energy Technology Data Exchange (ETDEWEB)

    Calleja, Michele; Dimigen, Marion; Saifuddin, Asif [Royal National Orthopaedic Hospital, Stanmore (United Kingdom)

    2012-12-15

    To identify the MRI features of superficial soft tissue masses, that may allow differentiation between malignant and non-malignant lesions. A total of 136 consecutive patients referred to a supra-regional musculoskeletal oncology center over a 10-year period with the diagnosis of a superficial soft tissue mass were included in this retrospective study. Features analyzed included patient demographics, lesion size, MRI signal characteristics, margins, lobulation, hemorrhage, necrosis, fascial edema, relationship to the fascia, as well as involvement of the skin. Comparison was then made with the final histological diagnosis. Of the patients reviewed, 58 were male and 78 were female, and the mean age was 49.9 years. The mean age for malignant lesions was 57.9 years, and that for non-neoplastic and benign conditions 41.9 years (p < 0.001). A significant relationship was identified between malignancy and lobulation (p < 0.01), hemorrhage (p < 0.001), fascial edema (p < 0.001), hemorrhage (p < 0.0001) and necrosis (p < 0.001). The relationship between skin thickening and skin contact and malignancy was also found to be significant. However, size was not found to be an important determining factor for malignancy, with a significant proportion of malignant superficial sarcomas measuring less than 5 cm in maximal diameter. This study has shown that a significant proportion of malignant superficial sarcomas measured less than 5 cm in maximal diameter. Fascial edema, skin thickening, skin contact, hemorrhage, and necrosis were found to be highly significant factors indicative of malignancy. Lobulation and peritumoral edema were also significant MRI features. (orig.)

  6. Influencia del rayado sobre la resistencia electroquímica de les aleaciones de NiTi tratadas por un nuevo tratamiento térmico para aplicaciones biomédicas

    OpenAIRE

    Soualah, Lakhdar

    2005-01-01

    Las aleaciones de níquel-titanio son aleaciones que se utilizan cada vez más en aplicaciones biomédicas, por sus propiedades interesantes de superelasticidad, de memoria de forma, de resistencia a la corrosión y de biocompatibilidad. Sin embargo, los resultados obtenidos de su resistencia a la corrosión son muy variables, dependiendo del estado de superficie. Así, para mejorar, la resistencia a la corrosión de este material, se diseñó en un trabajo anterior un nuevo tratamie...

  7. Percutaneous treatment of delayed post-atherectomy superficial femoral artery pseudoaneurysm.

    Science.gov (United States)

    Akkus, Nuri Ilker; Fay, Matt; Varma, Jai

    2012-10-01

    SilverHawk atherectomy is commonly used in lower extremity percutaneous interventions. Minor perforations during SilverHawk atherectomy procedures are reported at a range of 0.8%. There are few reported cases in the literature about very late pseuodoaneursym formation after SilverHawk atherectomy. Herein we report a very unusual, late, concealed, acute rupture of superficial femoral artery with a large, painful pseuodoaneursym formation, 1 week after Silver- Hawk atherectomy and its treatment with Viabahn stent graft (W.L. Gore & Associates).

  8. Desarrollo de una metodología para la medición de la rugosidad superficial del suelo

    OpenAIRE

    García Moreno, Rosario

    2011-01-01

    El objetivo de la presente tesis doctoral ha sido el desarrollo de una metodología fiable, fácil de usar y de bajo coste par ala toma de datos e interpretación de la rugosidad superficial del suelo. Sobre la base de los resultados publicados en la bibliografía se desarrollaron tres prototipos para la toma de datos de la rugosidad superficial del suelo. El primero basado en la metodología de láser sin contacto, el segundo tipo perfilométro de varillas, y un tercero, basado en el análisis de so...

  9. Aplicación de las espectroscopias IR/ATR y Raman al estudio de la superficie de vidrios sometidos a molturación

    Directory of Open Access Journals (Sweden)

    Pérez-Villar, S.

    2008-04-01

    Full Text Available The grinding process of vítreous silica and a conventional glass has been studied by means of Raman and IR/ATR spectroscopies. By using the obtained spectra, the positions and areas of the different bands have been calculated. The Raman spectra have been analysed using the Polymerisation Index (PI that indicates the depolymerization degree achieved on the particle surface after grinding. On the other hand, the IR/ATR spectra have been used to follow the positions of the symmetric and antisymmetric Si-O-Si bands. It has been observed that both techniques give similar results. These indicate that the depolymerisation degree increases with the grinding process. This depolymerisation is due to the broke of Si-O-Si bonds.

    El proceso de molienda de sílice vítrea y un vidrio convencional se ha estudiado mediante espectroscopias IR/ATR y Raman. A partir de los espectros obtenidos para diferentes tamaños de partícula se calcularon tanto las posiciones como las áreas de las bandas que aparecían en cada espectro. Utilizando los espectros Raman se ha hecho uso del denominado Índice de Polimerización (IP el cual es indicativo del grado de despolimerización producido en la superficie de las partículas tras el proceso de molienda. Por otro lado, mediante los espectros IR/ATR y analizando las posiciones de las bandas de tensión simétrica y asimétrica de los enlaces Si-O-Si se ha podido seguir el citado proceso de molturación. Se ha observado, mediante ambas técnicas, como la superficie de las partículas se despolimeriza al disminuir el tamaño de partícula. Esta despolimerización es debida a la rotura de los enlaces Si-O-Si.

  10. The flexural stiffness of superficial neuromasts in the zebrafish (Danio rerio) lateral line

    NARCIS (Netherlands)

    McHenry, Matthew J.; van Netten, Sietse M.

    2007-01-01

    Superficial neuromasts are structures that detect water flow on the surface of the body of fish and amphibians. As a component of the lateral line system, these receptors are distributed along the body, where they sense flow patterns that mediate a wide variety of behaviors. Their ability to detect

  11. Modelo hidrológico para estimativa do escoamento superficial em áreas agrícolas A hydrologic model to estimate the surface runoff in agricultural lands

    Directory of Open Access Journals (Sweden)

    Fernando F. Pruski

    2001-05-01

    Full Text Available Desenvolveu-se um modelo hidrológico para estimar o escoamento superficial em áreas sob condições agrícolas. O modelo é baseado na análise dos diversos processos associados ao balanço hídrico e nele se usa a equação de intensidade, duração e freqüência da precipitação para estimar a intensidade de precipitação e a equação de Green-Ampt modificada por Mein-Larson, para estimar a velocidade de infiltração permitindo, também, a consideração da interceptação pela cobertura vegetal e do armazenamento de água sobre a superfície do solo por meio de diferentes metodologias. O escoamento superficial começa após a capacidade de armazenamento sobre a superfície do solo ter sido preenchida, e é calculado subtraindo-se a velocidade de infiltração da água no solo da intensidade de precipitação durante o intervalo de tempo em que a intensidade da chuva é maior que a velocidade de infiltração. Resultados de um experimento de validação do modelo e duas aplicações práticas são apresentados, sendo que os resultados obtidos com o modelo foram muito próximos daqueles observados no campo.A hydrologic model was developed to estimate the surface runoff under agricultural conditions. The model is process-based and uses the intensity-duration-frequency equation to calculate the rainfall intensity and the Green-Ampt-Mein-Larson equation to estimate the infiltration rate. The runoff begins after the maximum surface storage on the soil surface has been reached. It is calculated by subtracting the infiltration rate from the rainfall intensity during the interval of time that the rainfall intensity is greater than the infiltration rate. The model also allows the calculation of the deep percolation and the actual soil-water content. Results from a validation experiment and two practical applications of the model are also presented. The results obtained with the model were approximately the same as those observed in the field.

  12. Superficial and deep learning approaches among medical students in an interdisciplinary integrated curriculum.

    Science.gov (United States)

    Mirghani, Hisham M; Ezimokhai, Mutairu; Shaban, Sami; van Berkel, Henk J M

    2014-01-01

    Students' learning approaches have a significant impact on the success of the educational experience, and a mismatch between instructional methods and the learning approach is very likely to create an obstacle to learning. Educational institutes' understanding of students' learning approaches allows those institutes to introduce changes in their curriculum content, instructional format, and assessment methods that will allow students to adopt deep learning techniques and critical thinking. The objective of this study was to determine and compare learning approaches among medical students following an interdisciplinary integrated curriculum. This was a cross-sectional study in which an electronic questionnaire using the Biggs two-factor Study Process Questionnaire (SPQ) with 20 questions was administered. Of a total of 402 students at the medical school, 214 (53.2%) completed the questionnaire. There was a significant difference in the mean score of superficial approach, motive and strategy between students in the six medical school years. However, no significant difference was observed in the mean score of deep approach, motive and strategy. The mean score for years 1 and 2 showed a significantly higher surface approach, surface motive and surface strategy when compared with students in years 4-6 in medical school. The superficial approach to learning was mostly preferred among first and second year medical students, and the least preferred among students in the final clinical years. These results may be useful in creating future teaching, learning and assessment strategies aiming to enhance a deep learning approach among medical students. Future studies are needed to investigate the reason for the preferred superficial approach among medical students in their early years of study.

  13. Under digital fluoroscopic guidance multiple-point injection with absolute alcohol and pinyangmycin for the treatment of superficial venous malformations

    International Nuclear Information System (INIS)

    Yang Ming; Xiao Gang; Peng Youlin

    2010-01-01

    Objective: to investigate the therapeutic efficacy of multiple-point injection with absolute alcohol and pinyangmycin under digital fluoroscopic guidance for superficial venous malformations. Methods: By using a disposal venous transfusion needle the superficial venous malformation was punctured and then contrast media lohexol was injected in to visualize the tumor body, which was followed by the injection of ethanol and pinyangmycin when the needle was confirmed in the correct position. The procedure was successfully performed in 31 patients. The clinical results were observed and analyzed. Results: After one treatment complete cure was achieved in 21 cases and marked effect was obtained in 8 cases, with a total effectiveness of 93.5%. Conclusion: Multiple-point injection with ethanol and pinyangmycin under digital fluoroscopic guidance is an effective and safe technique for the treatment of superficial venous malformations, especially for the lesions that are deeply located and ill-defined. (authors)

  14. The Superficial Dermis May Initiate Keloid Formation: Histological Analysis of the Keloid Dermis at Different Depths

    Directory of Open Access Journals (Sweden)

    Hu Jiao

    2017-11-01

    Full Text Available Several studies have reported on certain aspects of the characteristics of different sites within a keloid lesion, but detailed studies on the keloid dermis at different depths within a keloid lesion are scarce. The aim of this study was to investigate the histology of the keloid dermis at different depths. This study included 19 keloid tissue samples that were collected from 19 patients and 19 normal skin samples, which were harvested from subjects without keloids or hypertrophic scar. Samples were studied by light microscopy using routine hematoxylin and eosin histochemical staining, and immunohistochemistry to detect CD20-positive B-lymphocytes and CD3-positive T-lymphocytes. Sirius Red histochemical staining was used to determine the type of collagen in keloid tissue and normal skin samples. The migratory properties of fibroblasts within the keloid dermis at different depths was compared, using an in vitro migration assay. The findings of this study showed that although the papillary and reticular dermis could be clearly distinguished in normal skin, three tissue layers were identified in the keloid dermis. The superficial dermis of keloid was characterized by active fibroblasts and lymphocytes; the middle dermis contained dense extracellular matrix (ECM with large numbers fibroblasts, and the deep dermis was poorly cellular and characterized by hyalinized collagen bundles. In the keloid samples, from the superficial to the deep dermis, type I collagen increased and type III collagen decreased, and fibroblasts from the superficial dermis of the keloid were found to migrate more rapidly. In conclusion, the findings of this study showed that different depths within the keloid dermis displayed different biological features. The superficial dermis may initiate keloid formation, in which layer intralesional injection of pharmaceuticals and other treatments should be performed for keloid.

  15. [Superficial mycoses: comparative study between type 2 diabetic patients and a non-diabetic control group].

    Science.gov (United States)

    García-Humbría, Leila; Richard-Yegres, Nicole; Pérez-Blanco, Maigualida; Yegres, Francisco; Mendoza, Mireya; Acosta, Arnaldo; Hernández, Rosaura; Zárraga, Eluz

    2005-03-01

    Superficial mycoses are considered to affect more frequently patients with type 2 diabetes mellitus (DM-2), specially onychomycosis and Tinea pedis. The purpose of this study was to compare the dermatophytoses, candidiasis and Pitiriasis versicolor frequency between 40 patients with DM-2 and 40 healthy persons of either sex, 40 years old or more. Clinical, metabolic, mycologic and inmunologic studies against Candida albicans, were carried out. Both diabetics 75% (30/40) and controls 65% (26/40) presented a high frequency of superficial mycoses (no significant difference p = 0.329). Pitiriasis versicolor was not detected in diabetic patients. They presented Tinea unguium, concomitant with Tinea pedis, with a higher frequency. The predominant dermatophyte was Trichophyton rubrum 18/23 (78%) in diabetics and 8/16 (50%) in non diabetics. Candida was isolated as commensal from oral mucous: 23/40 (58%) in diabetics and 21/40 (52%) in non diabetics (serotipo A was the more frequent), and from onychomycosis: 11/40 (28%) in diabetics and 12/40 (30%) in non diabetics. The immunological response was the same in both groups: celular 100%, humoral 20%. No statistical correlation among superficial mycoses, blood glucose level, glycosylated hemoglobin values or the time suffering the disease was observed. The high susceptibility to dermatophytes and Candida sp. infection showed to be associated with age and no with the diabetic type 2 condition in those patients.

  16. Aperfeiçoamento da técnica de Soldagem Pontual por Fricção (FSpW para união de poliamida 6 e laminado de poliamida 66 com fibra de carbono

    Directory of Open Access Journals (Sweden)

    Joel Gonçalves

    2014-03-01

    Full Text Available A Soldagem Pontual por Fricção ('Friction Spot Welding - FSpW' é uma técnica inovadora que foi desenvolvida e patenteada em 2005 pelo centro de pesquisa alemão Helmholtz Zentrum Geesthacht (HZG. A técnica apresenta ciclos rápidos, baixo custo operacional e gera soldas com alto desempenho mecânico. Foi inicialmente projetada para a soldagem de ligas metálicas leves. A soldagem de polímeros é alvo de pesquisas recentes e a soldagem de compósitos poliméricos por FSpW ainda é inédita. Este estudo demonstrou a viabilidade técnica da soldagem de chapa de poliamida 6 (PA6 e laminado de poliamida 66 e fibra de carbono (CF-PA66 por FSpW. O histórico térmico, o acabamento superficial, a microestrutura da região da solda e a resistência mecânica ao cisalhamento de juntas sobrepostas PA6/CF-PA66 foram investigados. O aumento do tamanho do anel de fixação da ferramenta original, projetada para a soldagem de metais, possibilitou a seleção de parâmetros de soldagem que resultaram em grande aporte térmico, resultando no aumento da área soldada, num menor entalhe (inscrição deixado pela ferramenta na amostra, produzindo melhoria no acabamento superficial da solda. Essa otimização resultou em uma junta PA6/CF-PA66 com resistência ao cisalhamento de 35 MPa (2196 N, com fratura predominante na placa superior de PA6.

  17. Hallazgos laparoscópicos en la infección por Schistosoma mansori. Estudio en 209 pacientes

    Directory of Open Access Journals (Sweden)

    Fabio Rivas Muñoz

    1988-12-01

    Full Text Available Se describen los hallazgos laparoscópicos en 209 pacientes parasitados de Schistosoma mansoni, estudiados en el lnstituto de Medicina Tropical "PEDRO KOURI" (IPK de La Habana (Cuba entre 1979 y 1988. El diagnóstico de la enfermedad se hizo mediante análisis coproparasitológico, utilizando la técnica de Knigth. La laparoscopía, realizada de conformidad con el paciente, antes de instaurar el tratamiento, mostró la presencia de GRANULOMAS sobre la superficie hepática y ESPLENOMEGALIA como los hallazgos más prominentes. No se tiene conocimiento de reportes similares con este tipo de estudios y se plantea la posibilidad de que la laparoscopía se constituya en una herramienta importante en la valoración del grado de compromiso hepatoesplénico sufrido por quienes padecen la enfermedad.

  18. Imaging Features of Superficial and Deep Fibromatoses in the Adult Population

    Directory of Open Access Journals (Sweden)

    Eric A. Walker

    2012-01-01

    Full Text Available The fibromatoses are a group of benign fibroblastic proliferations that vary from benign to intermediate in biological behavior. This article will discuss imaging characteristics and patient demographics of the adult type superficial (fascial and deep (musculoaponeurotic fibromatoses. The imaging appearance of these lesions can be characteristic (particularly when using magnetic resonance imaging. Palmar fibromatosis demonstrates multiple nodular or band-like soft tissue masses arising from the proximal palmar aponeurosis and extending along the subcutaneous tissues of the finger in parallel to the flexor tendons. T1 and T2-weighted signal intensity can vary from low (higher collagen to intermediate (higher cellularity, similar to the other fibromatoses. Plantar fibromatosis manifests as superficial lesions along the deep plantar aponeurosis, which typically blend with the adjacent plantar musculature. Linear tails of extension (“fascial tail sign” along the aponeurosis are frequent. Extraabdominal and abdominal wall fibromatosis often appear as a heterogeneous lesion with low signal intensity bands on all pulse sequences and linear fascial extensions (“fascial tail” sign with MR imaging. Mesenteric fibromatosis usually demonstrates a soft tissue density on CT with radiating strands projecting into the adjacent mesenteric fat. When imaging is combined with patient demographics, a diagnosis can frequently be obtained.

  19. Synthesis, characterization, and evaluation of a superficially porous particle with unique, elongated pore channels normal to the surface.

    Science.gov (United States)

    Wei, Ta-Chen; Mack, Anne; Chen, Wu; Liu, Jia; Dittmann, Monika; Wang, Xiaoli; Barber, William E

    2016-04-01

    In recent years, superficially porous particles (SPPs) have drawn great interest because of their special particle characteristics and improvement in separation efficiency. Superficially porous particles are currently manufactured by adding silica nanoparticles onto solid cores using either a multistep multilayer process or one-step coacervation process. The pore size is mainly controlled by the size of the silica nanoparticles and the tortuous pore channel geometry is determined by how those nanoparticles randomly aggregate. Such tortuous pore structure is also similar to that of all totally porous particles used in HPLC today. In this article, we report on the development of a next generation superficially porous particle with a unique pore structure that includes a thinner shell thickness and ordered pore channels oriented normal to the particle surface. The method of making the new superficially porous particles is a process called pseudomorphic transformation (PMT), which is a form of micelle templating. Porosity is no longer controlled by randomly aggregated nanoparticles but rather by micelles that have an ordered liquid crystal structure. The new particle possesses many advantages such as a narrower particle size distribution, thinner porous layer with high surface area and, most importantly, highly ordered, non-tortuous pore channels oriented normal to the particle surface. This PMT process has been applied to make 1.8-5.1μm SPPs with pore size controlled around 75Å and surface area around 100m(2)/g. All particles with different sizes show the same unique pore structure with tunable pore size and shell thickness. The impact of the novel pore structure on the performance of these particles is characterized by measuring van Deemter curves and constructing kinetic plots. Reduced plate heights as low as 1.0 have been achieved on conventional LC instruments. This indicates higher efficiency of such particles compared to conventional totally porous and

  20. Effect of exposing pupae of flesh fly Parasarcophaga ruficornis F. to superficial X-rays

    International Nuclear Information System (INIS)

    Kumar, K.; Srivastava, U.S.

    1991-01-01

    Irradiation of pupae of Parasarcophaga ruficornis with different doses of superficial X-rays leads to lethality and interference with moulting and metamorphosis. Younger pupae are more radiosensitive in respect of lethality and metamorphosis to older ones. (author). 12 ref., 9 figs., 1 tab

  1. Effect of superficial velocity on vaporization pressure drop with propane in horizontal circular tube

    Science.gov (United States)

    Novianto, S.; Pamitran, A. S.; Nasruddin, Alhamid, M. I.

    2016-06-01

    Due to its friendly effect on the environment, natural refrigerants could be the best alternative refrigerant to replace conventional refrigerants. The present study was devoted to the effect of superficial velocity on vaporization pressure drop with propane in a horizontal circular tube with an inner diameter of 7.6 mm. The experiments were conditioned with 4 to 10 °C for saturation temperature, 9 to 20 kW/m2 for heat flux, and 250 to 380 kg/m2s for mass flux. It is shown here that increased heat flux may result in increasing vapor superficial velocity, and then increasing pressure drop. The present experimental results were evaluated with some existing correlations of pressure drop. The best prediction was evaluated by Lockhart-Martinelli (1949) with MARD 25.7%. In order to observe the experimental flow pattern, the present results were also mapped on the Wang flow pattern map.

  2. Portable exhausters POR-004 SKID B, POR-005 SKID C, POR-006 SKID D storage plan

    International Nuclear Information System (INIS)

    Nelson, O.D.; Keller, G.M.

    1997-01-01

    This document provides a storage plan for portable exhausters POR-004 SKID B, POR-005 SKID C, AND POR-006 SKID D. The exhausters will be stored until they are needed by the TWRS (Tank Waste Remediation Systems) Saltwell Pumping Program. The storage plan provides criteria for portable exhauster storage, periodic inspections during storage, and retrieval from storage

  3. Malignant degree of tumor and degree of trauma after HOLBT and TURBT treatment of superficial bladder cancer

    Directory of Open Access Journals (Sweden)

    Yi-Qin Wang

    2016-07-01

    Full Text Available Objective: To assess the malignant degree of tumor and degree of trauma after holmium laser resection of bladder tumor (HOLBT and transurethral resection of bladder tumor (TURBT treatment of superficial bladder cancer. Methods: A total of 76 cases of patients with superficial bladder cancer were included for study and divided into observation group 38 cases and control group 38 cases according to different surgical methods. Control group received TURBT, observation group received HOLBT, and then differences in the values of postoperative serum illness-related indicators, bladder cancer-related mRNA expression, bladder cancer tissue-related protein expression, surgical trauma-related indicators, etc. were compared between two groups. Results: Postoperative serum CIP2A, HGF, SE-cad, TSGF, DKK-1, YKL-40 and sFas values of observation group were lower than those of control group; postoperative focus HSG, p16 and MRP-1/CD9 mRNA expression levels of observation group were higher than those of control group while Med-19 mRNA expression level was lower than that of control group; postoperative focus ZEB1, Cripto-1, Sox2, Survivin, Livin and zeste protein expression levels of observation group were lower than those of control group while E-cadherin expression level was higher than that of control group; early postoperative FBG and HOMA-IR values of observation group were lower than those of control group while PTA and FIB values were higher than those of control group. Conclusions: HOLBT can effectively remove superficial bladder cancer foci and reduce the malignant degree of tumor, causes less surgical trauma and is an ideal surgical treatment of superficial bladder cancer.

  4. Processing speed and working memory span: their differential role in superficial and deep memory processes in schizophrenia.

    Science.gov (United States)

    Brébion, Gildas; Bressan, Rodrigo A; Pilowsky, Lyn S; David, Anthony S

    2011-05-01

    Previous work has suggested that decrement in both processing speed and working memory span plays a role in the memory impairment observed in patients with schizophrenia. We undertook a study to examine simultaneously the effect of these two factors. A sample of 49 patients with schizophrenia and 43 healthy controls underwent a battery of verbal and visual memory tasks. Superficial and deep encoding memory measures were tallied. We conducted regression analyses on the various memory measures, using processing speed and working memory span as independent variables. In the patient group, processing speed was a significant predictor of superficial and deep memory measures in verbal and visual memory. Working memory span was an additional significant predictor of the deep memory measures only. Regression analyses involving all participants revealed that the effect of diagnosis on all the deep encoding memory measures was reduced to non-significance when processing speed was entered in the regression. Decreased processing speed is involved in verbal and visual memory deficit in patients, whether the task require superficial or deep encoding. Working memory is involved only insofar as the task requires a certain amount of effort.

  5. Synergistic responses of superficial chemistry and micro topography of titanium created by wire-type electric discharge machining.

    Science.gov (United States)

    Kataoka, Yu; Tamaki, Yukimichi; Miyazaki, Takashi

    2011-01-01

    Wire-type electric discharge machining has been applied to the manufacture of endosseous titanium implants as this computer associated technique allows extremely accurate complex sample shaping with an optimal micro textured surface during the processing. Since the titanium oxide layer is sensitively altered by each processing, the authors hypothesized that this technique also up-regulates biological responses through the synergistic effects of the superficial chemistry and micro topography. To evaluate the respective in vitro cellular responses on the superficial chemistry and micro topography of titanium surface processed by wire-type electric discharge, we used titanium-coated epoxy resin replica of the surface. An oxide layer on the titanium surface processed by wire-type electric discharge activated the initial responses of osteoblastic cells through an integrin-mediated mechanism. Since the mRNA expression of ALP on those replicas was up-regulated compared to smooth titanium samples, the micro topography of a titanium surface processed by wire-type electric discharge promotes the osteogenic potential of cells. The synergistic response of the superficial chemistry and micro topography of titanium processed by wire-type electric discharge was demonstrated in this study.

  6. Infeção por staphylococcus aureus meticilina-resistente da comunidade em Portugal

    Directory of Open Access Journals (Sweden)

    R. Nazareth

    2012-01-01

    Full Text Available Resumo: Recentemente assistiu-se à emergência de infeções na comunidade por Staphylococcus aureus meticilina-resistente (MRSA em indivíduos sem fatores de risco. O MRSA associado à comunidade (CA-MRSA parece ser mais virulento, causando desde infeções superficiais da pele e tecidos moles até fasceíte necrosante e, raramente, pneumonia.O CA-MRSA foi inicialmente identificado na Austrália no início da década de 80 e, após cerca de duas décadas, surgiu nos EUA e em vários países da Europa, Ásia e América do Sul. Não existe informação disponível acerca da prevalência em Portugal.Os autores reportam o primeiro caso de infeção por CA-MRSA em Portugal, num adulto jovem com pneumonia necrotizante grave complicada por empiema bilateral e insuficiência respiratória. Abstract: Methicillin-resistant Staphylococcus aureus (MRSA has recently emerged as a cause of community-acquired infections among individuals without risk factors. Community-associated MRSA (CA-MRSA appears to be more virulent, causing superficial mild skin and soft tissue infections to severe necrotizing fasciitis, and in rare cases, pneumonia.Community-associated MRSA was first reported in Australia in the early 80s, after almost two decades in the USA, and then in several countries in Europe, Asia and South America. No data exists in Portugal.We report the first case of CA-MRSA infection in Portugal, in a young adult with severe necrotizing pneumonia, complicated with bilateral empyema and respiratory failure. Palavras-chave: comunidade associada, MRSA, Staphylococcus aureus, pneumonia necrosante, empiema, Keywords: Community-associated, MRSA, Staphylococcus aureus, Necrotizing pneumonia, Empyema

  7. Efficacy and safety of a new superficial chemical peel using alpha-hydroxy acid, vitamin C and oxygen for melasma.

    Science.gov (United States)

    Kim, Won-Serk

    2013-02-01

    Facial skin pigmentary disorders can be resistant to conventional treatment. Superficial chemical peel is an effective and safe treatment in pigmentary problems including melasma, post-inflammatory hyperpigmentation and aging spots. To assess the efficacy and safety of new superficial chemical peel (Melasma peel, Theraderm®), this is composed of alpha-hydroxy acid (AHAs), vitamin C and oxygen for melasma. Twenty-five ethnic Korean patients (Fitzpatrick skin phototypes IV and V) with moderate to severe melasma were enrolled. The patients underwent four treatments at 1-2-week intervals for 8 weeks. Clinical improvement was evaluated on a 5-point scale by participants and by the same dermatologist, and adverse effects were checked during the study. Improvement in the degree of pigmentation, pores, and evenness were noted. Significant clinical improvement of hyperpigmentation was evident. No adverse effects were reported. New superficial chemical peel using AHAs, vitamin C and oxygen is an effective and very safe treatment for melasma.

  8. Comparison between PIII superficial treatment and ceramic coating in creep test of Ti-6Al-4V alloy

    International Nuclear Information System (INIS)

    Reis, D.A.P.; Moura Neto, C.; Silva, M.M.; Ueda, M.; Oliveira, V.S.; Couto, A.A.

    2009-01-01

    The objective of this work was evaluating the creep resistance of the Ti-6Al-4V alloy with superficial treatment of PIII superficial treatment and ceramic coating in creep test of Ti-6Al-4V alloy. It was used Ti-6Al-4V alloy as cylindrical bars under forged and annealing of 190 deg C by 6 hours condition and cooled by air. The Ti-6Al-4V alloy after the superficial treatment of PIII and ceramic coating was submitted to creep tests at 600°C and 250 and 319 MPa under constant load mode. In the PIII treatment the samples was put in a vacuum reactor (76 x 10 -3 Pa) and implanted by nitrogen ions in time intervals between 15 and 120 minutes. Yttria (8 wt.%) stabilized zirconia (YSZ) with a CoNiCrAlY bond coat was atmospherically plasma sprayed on Ti-6Al-4V substrates by Sulzer Metco Type 9 MB. The obtained results suggest the ceramic coating on Ti-6Al-4V alloy improved its creep resistance. (author)

  9. Repair and Strengthening by Use of Superficial Fixed Laminates of Cracked Masonry Walls Sheared Horizontally-Laboratory Tests

    International Nuclear Information System (INIS)

    Kubica, Jan; Kwiecien, Arkadiusz; Zajac, Boguslaw

    2008-01-01

    There are many methods of crack repairing in masonry structures. One of them is repair and strengthening by using of superficial fixed laminates, especially in case of masonry walls with plastering on their both sides. The initial laboratory tests of three different types of strengthening of diagonal cracked masonry wallettes are presented. Tests concerned three clay brick masonry walls subjected to horizontal shearing with two levels of precompression and strengthened by flexible polymer injection, superficial glass fixed by polymer fibre laminate plates and using of CRFP strips stiff fixed to the wall surface by polymer and stiff resin epoxy fixing are presented and discussed

  10. Modification of a Superficial X-Ray Therapy Machine for Rectal Contact Therapy

    Energy Technology Data Exchange (ETDEWEB)

    Barish, Robert J.; Donohue, Karen Episcopia

    2015-01-15

    X-ray therapy of superficial rectal cancers using a hand-held 50 kV contact unit (Philips RT-50) in a technique first described by Papillon had reached a point of widening clinical acceptability when the manufacturer of this equipment discontinued its production. To pursue this endocavitary approach to rectal therapy, technical modifications have to be made to conventional superficial x-ray therapy machines. Advantages over the original Papillon method include remote viewing of the lesion through the proctoscopic cone and a lower radiation exposure for the operator. We have evaluated a Bucky Combination Therapy Unit under conditions in which the operating voltage (65 kV), target skin distance (23.6 cm), and added filtration (0.39 mm Al) were selected in order to match as closely as possible the beam penetration characteristics of the “standard” (Papillon) technique. With this equipment, the thermal characteristics of the tube anode and housing limit the amount of radiation that can be delivered before a “rest period” for the machine is needed. In practice, 3 minutes of irradiation at an exposure rate of 500 R/min can be performed followed by an interval of 3 minutes before irradiation can be resumed.

  11. Detección y estudio mediante Fluorescencia Inducida por Láser de radicales libres formados por Disociación Multifotónica Infrarroja

    Science.gov (United States)

    Santos, M.; Díaz, L.; Torresano, J. A.; Rubio, L.; Samoudi, B.

    Una de las principales aplicaciones actuales de los procesos de disociación multifotónica inducidos por radiación láser infrarroja (DMI) es la producción de radiales libres, con el fin de estudiar sus propiedades cinéticas y espectroscópicas. La disociación de moléculas poliatómicas en el IR con láseres de CO2 tiene lugar desde la superficie de energía molecular mas baja y conduce generalmente a la formación de fragmentos en el estado electrónico fundamental, con diversos grados de excitación vibracional. En el Grupo de Procesos Multifotónicos del Instituto de Estructura de la Materia del C.S.I.C. hemos puesto a punto la técnica de Fluorescencia Inducida por Láser (LIF) para la detección y análisis en tiempo real de los fragmentos producidos en la DMI inducida mediante uno o dos campos láseres de diferentes longitudes de onda. Objetivos de nuestro trabajo han sido el estudio de los canales de disociación mayoritarios y de las especies transitoria producidas, así como de la distribución de energía interna con que éstas son generadas. En particular hemos detectado mediante LIF las especies: C2, CF, CH, SiH2, CF2, CH2, SiHCl, y CF3 a partir de la disociación de, entre otras, las siguientes moléculas: C2H3Br, C3F6, C4H8Si, C2H5ClSi y CH5ClSi. En este trabajo presentamos algunos de los resultados obtenidos mediante el estudio por LIF de estos radicales: estudio temporal de la señal LIF obtenida con determinación de tiempos de vida, espectros de excitación y fluorescencia, temperaturas vibracionales de formación, variación de la intensidad LIF con el tiempo de retraso entre los láseres de disociación y prueba, etc.

  12. Transforming growth factor β-induced superficial zone protein accumulation in the surface zone of articular cartilage is dependent on the cytoskeleton.

    Science.gov (United States)

    McNary, Sean M; Athanasiou, Kyriacos A; Reddi, A Hari

    2014-03-01

    The phenotype of articular chondrocytes is dependent on the cytoskeleton, specifically the actin microfilament architecture. Articular chondrocytes in monolayer culture undergo dedifferentiation and assume a fibroblastic phenotype. This process can be reversed by altering the actin cytoskeleton by treatment with cytochalasin. Whereas dedifferentiation has been studied on chondrocytes isolated from the whole cartilage, the effects of cytoskeletal alteration on specific zones of cells such as superficial zone chondrocytes are not known. Chondrocytes from the superficial zone secrete superficial zone protein (SZP), a lubricating proteoglycan that reduces the coefficient of friction of articular cartilage. A better understanding of this phenomenon may be useful in elucidating chondrocyte dedifferentiation in monolayer and accumulation of the cartilage lubricant SZP, with an eye toward tissue engineering functional articular cartilage. In this investigation, the effects of cytoskeletal modulation on the ability of superficial zone chondrocytes to secrete SZP were examined. Primary superficial zone chondrocytes were cultured in monolayer and treated with a combination of cytoskeleton modifying reagents and transforming growth factor β (TGFβ) 1, a critical regulator of SZP production. Whereas cytochalasin D maintains the articular chondrocyte phenotype, the hallmark of the superficial zone chondrocyte, SZP, was inhibited in the presence of TGFβ1. A decrease in TGFβ1-induced SZP accumulation was also observed when the microtubule cytoskeleton was modified using paclitaxel. These effects of actin and microtubule alteration were confirmed through the application of jasplakinolide and colchicine, respectively. As Rho GTPases regulate actin organization and microtubule polymerization, we hypothesized that the cytoskeleton is critical for TGFβ-induced SZP accumulation. TGFβ-mediated SZP accumulation was inhibited by small molecule inhibitors ML141 (Cdc42), NSC23766 (Rac1

  13. Análisis de las Observaciones sub-hora de la Radiación Solar registrada por las Estaciones Meteorológicas Voluntarias de la red MeteoClimatic

    OpenAIRE

    Gutierrez Corea, Federico Vladimir

    2011-01-01

    Enriquecer el conocimiento sobre la Radiación Solar (RS) a nivel del suelo es de gran interés para diferentes aplicaciones meteorológicas entre ellas el área de las energías renovables como la energía solar. La interpolación de observaciones de RS por estaciones en tierra, los sensores remotos y la ejecución de distintos modelos son algunas de las formas que existen para obtener valores de RS con continuidad espacial en el terreno. Aunque se sabe que los mejores valores de RS en la superficie...

  14. Análisis de las Observaciones sub-hora de la Radiación Solar registrada por las Estaciones Meteorológicas Voluntarias de la red MeteoClimatic

    OpenAIRE

    Gutierrez Corea, Federico Vladimir

    2013-01-01

    Enriquecer el conocimiento sobre la Radiación Solar (RS) a nivel del suelo es de gran interés para diferentes aplicaciones meteorológicas entre ellas el área de las energías renovables como la energía solar. La interpolación de observaciones de RS por estaciones en tierra, los sensores remotos y la ejecución de distintos modelos son algunas de las formas que existen para obtener valores de RS con continuidad espacial en el terreno. Aunque se sabe que los mejores valores de RS en la superficie...

  15. Intravascular ultrasound evaluation of JETSTREAM atherectomy removal of superficial calcium in peripheral arteries.

    Science.gov (United States)

    Maehara, Akiko; Mintz, Gary S; Shimshak, Thomas M; Ricotta, Joseph J; Ramaiah, Venkatesh; Foster, Malcolm T; Davis, Thomas P; Gray, William A

    2015-05-01

    Endovascular treatment of calcified femoral-popliteal disease is challenging. We sought to evaluate the mechanism of lumen gain when using the JETSTREAM Atherectomy System to treat calcified peripheral artery lesions. The JETSTREAM Calcium Study was a prospective, single-arm, multicentre study to evaluate the JETSTREAM Atherectomy System for severely calcified femoral-popliteal artery lesions, i.e., patients with claudication and lesions with superficial calcium >90° and >5 mm in length as determined by intravascular ultrasound (IVUS). The 2.1 mm catheter was used in this study without distal protection. Fifty-five patients underwent angiographic screening: 26 (45%) met IVUS inclusion criteria. Angiographic calcium was moderate in eight cases and severe in 14, with no available data for four cases. Visual diameter stenosis was 86±9% pre-treatment, 37±13% post atherectomy, and 10±6% post adjunctive treatment (adjunctive PTA+stenting in eight and adjunct PTA alone in 16). IVUS showed lumen area increased from 6.6±3.7 mm2 to 10.0±3.6 mm2 (p=0.001): calcium reduction was responsible for 86±23% of the lumen increase. Although the superficial calcium arc did not change (151±70° to 146±71°, p=0.83), the arc of reverberation increased (23±20° to 65±40°, p=0.006), indicating device-related modification of calcium. Adjunctive balloon angioplasty was performed in 62% of the lesions, and stent implantation in 31%. In 11 cases with adjunctive balloon dilation, the MLA increased from 7.1 (6.4, 7.8) mm2 post atherectomy to 11.9 (10.3, 13.5) mm2 post balloon (pAtherectomy System increased lumen dimensions in moderately or severely calcified femoral-popliteal lesions by removing superficial calcium without major complications.

  16. An elemental abundance analysis of the superficially normal A star Vega

    International Nuclear Information System (INIS)

    Adelman, S.J.; Gulliver, A.F.

    1990-01-01

    An elemental abundance analysis of Vega has been performed using high-signal-to-noise 2.4 A/mm Reticon observations of the region 4313-4809 A. Vega is found to be a metal-poor star with a mean underabundance of 0.60 dex. The He/H ratio of 0.03 as derived from He I 4472 A suggests that the superficial helium convection zone has disappeared and that radiative diffusion is producing the photospheric abundance anomalies. 45 refs

  17. Medición del flujo de neutrinos cósmicos ultra energéticos mediante detectores de superficie

    OpenAIRE

    Pieroni, Pablo Emanuel

    2016-01-01

    Esta Tesis estudia la medición de neutrinos cósmicos ultra energéticos mediante detectores de superficie. Básicamente existen dos mecanismos a través de los cuales los neutrinos en el rango del EeV pueden inducir señales distinguibles a nivel de superficie. El primero consiste en la interacción de un neutrino en la atmósfera, via corrientes cargadas o neutras, y la subsiguiente producción de una cascada atmosférica extendida descendente. El segundo se basa en la interacción de un neutrino tau...

  18. Effect of routine repeat transurethral resection for superficial bladder cancer: a long-term observational study.

    Science.gov (United States)

    Grimm, Marc-Oliver; Steinhoff, Christine; Simon, Xenia; Spiegelhalder, Philipp; Ackermann, Rolf; Vogeli, Thomas Alexander

    2003-08-01

    We determined the long-term outcome in patients with superficial bladder cancer (Ta and T1) undergoing routine second transurethral bladder tumor resection (ReTURB) in regard to recurrence and progression. We performed an inception cohort study of 124 consecutive patients with superficial bladder cancer undergoing transurethral resection and routine ReTURB (83) between November 1993 and October 1995 at a German university hospital. Immediately after transurethral resection all lesions were documented on a designed bladder map. ReTURB of the scar from initial resection and other suspicious lesions was performed at a mean of 7 weeks. Patients were followed until recurrence or death, or a minimum of 5 years. Residual tumor was found in 33% of all ReTURB cases, including 27% of Ta and 53% of T1 disease, and in 81% at the initial resection site. Five of the 83 patients underwent radical cystectomy due to ReTURB findings. The estimated risk of recurrence after years 1 to 3 was 18%, 29% and 32%, respectively. After 5 years 63% of the patients undergoing ReTURB were still disease-free (mean recurrence-free survival 62 months, median 87). Progression to muscle invasive disease was observed in only 2 patients (3%) after a mean observation of 61 months. These data suggest a favorable outcome regarding recurrence and progression in patients with superficial bladder cancer who undergo ReTURB. ReTURB is suggested at least in those at high risk when bladder preservation is intended.

  19. Effects of immobilization on thickness of superficial zone of articular cartilage of patella in rats

    Directory of Open Access Journals (Sweden)

    Khadija Iqbal

    2012-01-01

    Conclusion: Each segment of superficial zone behaves differentially on immobilization and remobilization. Perhaps a much longer duration of remobilization is required to reverse changes of immobilization in articular cartilage and plays a significant role in knee joint movements.

  20. Peripapillary Retinal Nerve Fiber Layer Thickness Corresponds to Drusen Location and Extent of Visual Field Defects in Superficial and Buried Optic Disc Drusen.

    Science.gov (United States)

    Malmqvist, Lasse; Wegener, Marianne; Sander, Birgit A; Hamann, Steffen

    2016-03-01

    Optic disc drusen (ODD) are hyaline deposits located within the optic nerve head. Peripapillary retinal nerve fiber layer (RNFL) thinning is associated with the high prevalence of visual field defects seen in ODD patients. The goal of this study was to investigate the characteristics of patients with ODD and to compare the peripapillary RNFL thickness to the extent of visual field defects and anatomic location (superficial or buried) of ODD. Retrospective, cross sectional study. A total of 149 eyes of 84 ODD patients were evaluated. Sixty-five percent were female and 76% had bilateral ODD. Of 149 eyes, 109 had superficial ODD and 40 had buried ODD. Peripapillary RNFL thinning was seen in 83.6% of eyes, where optical coherence tomography was performed (n = 61). Eyes with superficial ODD had greater mean peripapillary RNFL thinning (P ≤ 0.0001) and visual field defects (P = 0.002) than eyes with buried ODD. There was a correlation between mean peripapillary RNFL thinning and visual field defects as measured by perimetric mean deviation (R-0.66; P = 0.0001). The most frequent visual field abnormalities were arcuate and partial arcuate defects. Peripapillary RNFL thickness correlates with anatomic location (superficial or buried) of ODD. Frequency and extent of visual field defects corresponded with anatomic location of ODD and peripapillary RNFL thickness, suggesting increased axonal damage in patients with superficial ODD.

  1. Superficial nephrons in BALB/c and C57BL/6 mice facilitate in vivo multiphoton microscopy of the kidney.

    Directory of Open Access Journals (Sweden)

    Ina Maria Schießl

    Full Text Available Multiphoton microscopy (MPM offers a unique approach for addressing both the function and structure of an organ in near-real time in the live animal. The method however is limited by the tissue-specific penetration depth of the excitation laser. In the kidney, structures in the range of 100 µm from the surface are accessible for MPM. This limitation of MPM aggravates the investigation of the function of structures located deeper in the renal cortex, like the glomerulus and the juxtaglomerular apparatus. In view of the relevance of gene-targeted mice for investigating the function of these structures, we aimed to identify a mouse strain with a high percentage of superficially located glomeruli. The mean distance of the 30 most superficial glomeruli from the kidney surface was determined in 10 commonly used mouse strains. The mean depth of glomeruli was 118.4±3.4, 123.0±2.7, 133.7±3.0, 132.3±2.6, 141.0±4.0, 145.3±4.3, 148.9±4.2, 151.6±2.7, 167.7±3.9, and 207.8±3.2 µm in kidney sections from 4-week-old C3H/HeN, BALB/cAnN, SJL/J, C57BL/6N, DBA/2N, CD1 (CRI, 129S2/SvPas, CB6F1, FVB/N and NMRI (Han mice, respectively (n = 5 animals from each strain. The mean distance from the kidney surface of the most superficial glomeruli was significantly lower in the strains C3H/HeN Crl, BALB/cAnN, DBA/2NCrl, and C57BL/6N when compared to a peer group consisting of all the other strains (p<.0001. In 10-week-old mice, the most superficial glomeruli were located deeper in the cortex when compared to 4-week-old animals, with BALB/cAnN and C57BL/6N being the strains with the highest percentage of superficial glomeruli (25% percentile 116.7 and 121.9 µm, respectively. In summary, due to significantly more superficial glomeruli compared to other commonly used strains, BALB/cAnN and C57BL/6N mice appear to be particularly suitable for the investigation of glomerular function using MPM.

  2. La forestación de tierras agrícolas en la provincia de Granada. Acciones dentro del programa de acompañamiento de la nueva P.A.C.

    Directory of Open Access Journals (Sweden)

    Juan GÁMEZ NAVARRO

    2004-01-01

    Full Text Available El objetivo de este artículo es analizar la situación actual del sector forestal en la provincia de Granada: superficie ocupada y especies predominantes, regímenes de propiedad, tipos de aprovechamientos, distribución por comarcas y aportación a la Producción Final Agraria (PFA.En segundo lugar, estudiaremos la repercusión que el programa de forestación de tierras agrícolas, subvencionado por la UE, a través de la Política Agrícola Común (PAC, ha tenido en las masas forestales de la pro- vincia, durante los años que ha estado vigente el programa de ayudas (1993/98. También analizaremos las reforestaciones llevadas a cabo por las administraciones públicas en esta provincia y en Andalucía, para así conocer el incremento total de superficie boscosa. Por último, para conocer el incremento real de superficie forestal estudiaremos las causas de los incendios forestales que se han producido en la última década y su incidencia en la pérdida de superficie forestal.

  3. El tratamiento de las superficies pétreas en Venecia. Algunos casos de estudio

    Directory of Open Access Journals (Sweden)

    Alessandra Quendolo

    2003-12-01

    Full Text Available Este estudio comparado de las superficies pétreas de tres edificios venecianos, la Biblioteca de Sansovino, el Palacio Corner y el Arco Foscari, reúne interés y novedad ya que demuestra que las superficies ennegrecidas no sólo representan la presencia de fenómenos de degradación como costra negra y depósitos sino que, a menudo, corresponden a patinados intencionales aplicados para proteger la piedra o tratamientos de entonación del color realizados en posteriores intervenciones. El artículo supone una doble aportación a la cultura de la conservación: la existencia de una tradición de los tratamientos de protección y conservación de los paramentos de piedra y la necesidad actual de conservar la presencia de estos patinados intencionales.

  4. Frecuencia de la colonización por Pneumocystis jirovecii en pacientes con Enfermedad Pulmonar Obstructiva Crónica en Bogotá, Colombia

    Directory of Open Access Journals (Sweden)

    Juan Felipe Burbano-Gutiérrez

    2017-04-01

    Full Text Available Antecedentes: la colonización por Pneumocystis jirovecci (P. jirovecii se ha postulado como causa de deterioro de la función pulmonar en pacientes con Enfermedad Pulmonar Obstructiva Crónica (EPOC. Se desconocía la frecuencia de aparición de la colonización por P. jirovencii en esa población en Colombia. Objetivo: documentar la frecuencia de colonización por P. jirovecii en mayores de 40 años con EPOC excluyendo a los pacientes que requirieran manejo inmunosupresor y a las personas infectadas por el Virus de la Inmunodeficiencia Humana (VIH. Materiales y métodos: se trató de un estudio de corte transversal, que contó con muestreo no probabilístico por conveniencia y selección continua de pacientes. Se realizó PCR (reacción en cadena de polimerasa en tiempo real (rt-PCR del esputo inducido con el Kit LighMix de P. jirovecii (Roche®-Suiza amplificándose un fragmento de 244 pares de bases a partir del gen de la glicoproteína de superficie del hongo. Resultados: para una muestra de 52 pacientes en total, se documentó una frecuencia de colonización del 15,4% en todos los participantes mayores de 65 años, quienes además presentaron altos índices de sintomatología según la escala modificada Medical Research Council (MR Cm y el cuestionario de evaluación de la EPOC (CAT. La mayoría de pacientes analizados se clasificó como GOLD D (63% en la clasificación por la Iniciativa Global para la EPOC. Conclusiones: la frecuencia de colonización por P. jirovecii en pacientes con EPOC detectada por rt-PCR en el esputo inducido fue del 15,4%. Este constituye el primer estudio colombiano que evalúa la frecuencia de colonización del hongo.

  5. Bajo impacto de la infección silente por el virus de la hepatitis B en la incidencia de hepatitis postransfusional en Venezuela

    Directory of Open Access Journals (Sweden)

    Gutiérrez Cristina

    2001-01-01

    Full Text Available Objetivo. Detectar la presencia de ADN del VHB en sueros de donantes de sangre negativos en las pruebas de los marcadores serológicos de hepatitis B empleados en el tamizaje, con el fin de evaluar el impacto de la infección silente por VHB sobre la incidencia de hepatitis B postransfusional en Venezuela. Métodos. Los sueros de 2 075 donantes de sangre negativos en las pruebas de los marcadores serológicos pesquisados en bancos de sangre venezolanos fueron analizados en 53 muestras, compuestas por la mezcla de 25-50 donaciones (0,5-1,0 mL de cada suero. Estas fueron sometidos a ultracentrifugación previa a la extracción del ADN viral por el método de proteinasa K-fenol-cloroformo. Resultados. En estas mezclas de sueros no se detectó ADN del VHB en ninguno de dos ensayos anidados de reacción en cadena de la polimerasa, mediante cebadores altamente conservados de las regiones que codifican el antígeno de superficie y de la cápside virales. Se observaron niveles normales de aminotransferasas en 98% de 200 sueros evaluados. Conclusiones. Estos resultados sugieren que el riesgo de adquirir hepatitis B postransfusional en Venezuela es bajo.

  6. Major therapeutic effect of pentoxifylline-tocopherol association in the superficial radioinduced fibrosis: phase II test

    International Nuclear Information System (INIS)

    Delanian, S.; Balla-Mekias, S.; Maylin, C.; Lefaix, J.L.

    1997-01-01

    The association of pentoxifylline-tocopherol seems efficient in the reduction of the superficial human radioinduced fibrosis. This phase II invites to realize a randomized test and to a comparison with the results got with the dismutase superoxide. (N.C.)

  7. Superficial dorsal horn neurons with double spike activity in the rat.

    Science.gov (United States)

    Rojas-Piloni, Gerardo; Dickenson, Anthony H; Condés-Lara, Miguel

    2007-05-29

    Superficial dorsal horn neurons promote the transfer of nociceptive information from the periphery to supraspinal structures. The membrane and discharge properties of spinal cord neurons can alter the reliability of peripheral signals. In this paper, we analyze the location and response properties of a particular class of dorsal horn neurons that exhibits double spike discharge with a very short interspike interval (2.01+/-0.11 ms). These neurons receive nociceptive C-fiber input and are located in laminae I-II. Double spikes are generated spontaneously or by depolarizing current injection (interval of 2.37+/-0.22). Cells presenting double spike (interval 2.28+/-0.11) increased the firing rate by electrical noxious stimulation, as well as, in the first minutes after carrageenan injection into their receptive field. Carrageenan is a polysaccharide soluble in water and it is used for producing an experimental model of semi-chronic pain. In the present study carrageenan also produces an increase in the interval between double spikes and then, reduced their occurrence after 5-10 min. The results suggest that double spikes are due to intrinsic membrane properties and that their frequency is related to C-fiber nociceptive activity. The present work shows evidence that double spikes in superficial spinal cord neurones are related to the nociceptive stimulation, and they are possibly part of an acute pain-control mechanism.

  8. Roles of PAD4 and NETosis in Experimental Atherosclerosis and Arterial Injury: Implications for Superficial Erosion.

    Science.gov (United States)

    Franck, Grégory; Mawson, Thomas L; Folco, Eduardo J; Molinaro, Roberto; Ruvkun, Victoria; Engelbertsen, Daniel; Liu, Xin; Tesmenitsky, Yevgenia; Shvartz, Eugenia; Sukhova, Galina K; Michel, Jean-Baptiste; Nicoletti, Antonino; Lichtman, Andrew; Wagner, Denisa; Croce, Kevin J; Libby, Peter

    2018-06-22

    Neutrophils likely contribute to the thrombotic complications of human atheromata. In particular, neutrophil extracellular traps (NETs) could exacerbate local inflammation and amplify and propagate arterial intimal injury and thrombosis. PAD4 (peptidyl arginine deiminase 4) participates in NET formation, but an understanding of this enzyme's role in atherothrombosis remains scant. This study tested the hypothesis that PAD4 and NETs influence experimental atherogenesis and in processes implicated in superficial erosion, a form of plaque complication we previously associated with NETs. Bone marrow chimeric Ldlr deficient mice reconstituted with either wild-type or PAD4-deficient cells underwent studies that assessed atheroma formation or procedures designed to probe mechanisms related to superficial erosion. PAD4 deficiency neither retarded fatty streak formation nor reduced plaque size or inflammation in bone marrow chimeric mice that consumed an atherogenic diet. In contrast, either a PAD4 deficiency in bone marrow-derived cells or administration of DNaseI to disrupt NETs decreased the extent of arterial intimal injury in mice with arterial lesions tailored to recapitulate characteristics of human atheroma complicated by erosion. These results indicate that PAD4 from bone marrow-derived cells and NETs do not influence chronic experimental atherogenesis, but participate causally in acute thrombotic complications of intimal lesions that recapitulate features of superficial erosion. © 2018 American Heart Association, Inc.

  9. Optimización del proceso de soldadura GMAW de uniones a tope de la aleación AA 6063-T5 basada en la metodología de superficie de respuesta y en la geometría del cordón de soldadura

    Directory of Open Access Journals (Sweden)

    Miguel, V.

    2012-10-01

    Full Text Available The geometry of the weld beads is characterized by the overhead, the width and the penetration. These values are indices of the behavior of the welded joint and therefore, they can be considered as factors that control the process. This work is performed to optimize the GMAW process of the aluminum alloy AA 6063-T5 by means of the response surface methodology (RSM. The variables herein considered are the arc voltage, the welding speed, the wire feed speed and the separation between surfaces in butt joints. The response functions that are herein studied are the overhead, the width, the penetration and the angle of the bead. The obtained results by RSM show high grade of agreement with the experimental values. The procedure is experimentally validated by welding for the theoretically obtained optimized technological conditions and a wide agreement between theoretical and experimental values is found.

    La geometría de los cordones de soldadura es caracterizada por el sobreespesor, la anchura y la penetración. Estos valores son indicadores del comportamiento de la unión soldada por lo que pueden considerarse como factores de control del proceso. En el presente trabajo se efectúa la optimización del proceso de soldadura por arco GMAW de la aleación AA 6063-T5 mediante la metodología de la superficie de respuesta (MSR. Las variables consideradas son la tensión del arco, la velocidad de soldeo, la velocidad de alimentación del electrodo y la separación de las superficies a unir. Las funciones de respuesta consideradas son el sobreespesor, anchura, penetración y el ángulo del cordón. Los resultados obtenidos mediante MSR se ajustan muy bien a los valores experimentales. El procedimiento es validado experimentalmente mediante el soldeo, para las condiciones tecnológicas optimizadas obtenidas de forma teórica, existiendo una gran concordancia entre los valores teóricos y los experimentales.

  10. Proyecto de ejecución de una nave para almacenamiento de cereales

    OpenAIRE

    Ramón Jiménez, Beatriz

    2013-01-01

    TRABAJO RECOMENDADO POR EL CENTRO El proyecto tiene por objeto sentar las bases técnicas para la ejecución de una nave o edificio que se destinará para el almacenaje de cereal, con una superficie construida de 1815 m² y superficie útil 1731 m², para lo cual se dispone de suficiente superficie en concreto en la calle San José Obrero, parcela 1, ubicada en el término municipal de El Burgo de Osma - Ciudad de Osma (Soria) donde se llevará a cabo el proyecto. La construcción de ...

  11. The Effects of Test Anxiety on Learning at Superficial and Deep Levels of Processing.

    Science.gov (United States)

    Weinstein, Claire E.; And Others

    1982-01-01

    Using a deep-level processing strategy, low test-anxious college students performed significantly better than high test-anxious students in learning a paired-associate word list. Using a superficial-level processing strategy resulted in no significant difference in performance. A cognitive-attentional theory and test anxiety mechanisms are…

  12. Evaluación de la Función Neuromuscular del Antebrazo durante contracciones isométricas mediante Electromiografía de Superficie Multicanal

    Directory of Open Access Journals (Sweden)

    Mónica Rojas-Martínez

    2011-04-01

    Full Text Available Resumen: Desarrollo de un protocolo experimental con ejercicios de flexión isométrica de los dedos y muñeca asociado a lesiones de esfuerzo repetitivo, y validación de la electromiografía de superficie multicanal como técnica no invasiva en la monitorización de procesos de rehabilitación, por ejemplo, de la mialgia muscular en músicos pianistas. El análisis de los patrones de activación de tres músculos extensores y un flexor del antebrazo en un grupo control ha permitido obtener resultados repetitivos y reproducibles, detectando fatiga en el músculo flexor y en un extensor durante los ejercicios de resistencia. La detección de potenciales de acción propagándose con una estimación de la velocidad de conducción dentro del rango fisiológico refrenda los resultados de los patrones musculares obtenidos. Palabras clave: bioingeniería, electromiografía, lesión muscular, procesado de señal, rehabilitación

  13. Avaliação da classificação histológica da endometriose observada em implantes de mulheres portadoras de endometriose pélvica superficial e profunda Evaluation of the endometriosis histological classification observed in specimens of women affected by superficial and deeply infiltrating pelvic endometriosis

    Directory of Open Access Journals (Sweden)

    Gil Kamergorodsky

    2007-11-01

    Full Text Available OBJETIVO: avaliar o padrão de diferenciação histológica em lesões de peritônio superficial e lesões de endometriose pélvica profunda (EPP, localizadas em ligamentos úteros-sacros, intestino (reto e sigmóide e septo retovaginal. MÉTODOS: estudo prospectivo não randomizado, que incluiu 139 pacientes. Foram obtidas 234 biópsias (179 com EPP - Grupo Profundas - e 55 com endometriose superficial - Grupo Superficiais. Das 179 lesões de EPP (Grupo Profundas, 15 foram obtidas do septo retovaginal, 72 de nódulos do reto e sigmóide e 92 de ligamentos útero-sacrais. As biópsias foram classificadas em glandulares bem diferenciadas, glandulares indiferenciadas, glandulares mistas e estromal, com base em uma classificação morfológica específica. RESULTADOS: no Grupo Profundas, 33,5% das biópsias apresentaram padrão glandular indiferenciado e 46,9%, padrão glandular misto. No Grupo Superficiais, houve predominância do padrão glandular diferenciado (41,8%. Comparando especificamente as diferentes localizações das biópsias de lesão de EPP (Grupo Profundas, notou-se que o padrão glandular misto foi predominante nos nódulos intestinais (61,1%. CONCLUSÕES: foi possível concluir que há predomínio de endometriose glandular bem diferenciada na endometriose superficial, predomínio da doença mista e indiferenciada na EPP e, especificamente estudando a endometriose de reto e sigmóide, houve predomínio da endometriose glandular mista.PURPOSE: to evaluate the histological differentiation pattern in superficial peritoneum lesions and in deeply infiltrating endometriosis (DIE in utero-sacral ligament, bowel (rectum and sigmoid colon and rectovaginal septum. METHODS: this prospective non-randomized study included 139 patients. Of the total, 234 biopsies were obtained (179 with DIE - Deeply Group - and 55 superficial endometriosis - Superficial Group. From the 179 DIE lesions (Depply Group, 15 were obtained from rectovaginal septum, 72

  14. A self-controlled study of intralesional injection of diprospan combined with topical timolol cream for treatment of thick superficial infantile hemangiomas.

    Science.gov (United States)

    Xu, Peng; Yu, Qian; Huang, Huizhen; Zhang, Wenjie; Li, Wei

    2018-04-30

    Topical application of timolol cream is effective and convenient for treating superficial infantile hemangiomas. Intralesional injection of corticosteroids, such as diprospan, is useful for the treatment of superficia infantile hemangiomas without systemic side effects. We conducted a self-controlled study to investigate whether a combination of intralesional injection of diprospan with topical timolol 0.5% cream would be more efficient than timolol cream alone in thick superficial infantile hemangiomas. Thirty-eight patients with 39 thick superficial infantile hemangiomas were recruited. Each lesion was randomly divided into two equal parts: one part was treated with topical timolol 0.5% cream (timolol cream group), while the other part was treated with injection of diprospan combined with topical timolol 0.5% cream (combined treatment group). Infants were followed every 4 weeks to determine whether injections should be continued, and timolol cream was applied four times daily for 5 months. During 5 months of treatment, three specialist physicians were invited to evaluate the therapeutic effects. The combined treatment group showed better lesion involution than did the timolol cream group regarding lesion thickness and color of lesions. The combination of intralesional injection of diprospan with topical timolol 0.5% cream is a suitable and safe strategy for thick superficial infantile hemangiomas. © 2018 Wiley Periodicals, Inc.

  15. CT-based needle marking of superficial intracranial lesions for minimal invasive neurosurgery

    International Nuclear Information System (INIS)

    Marquardt, G.; Wolff, R.; Schick, U.; Lorenz, R.

    2000-01-01

    A CT-based method of marking superficial intracranial lesions with a needle is presented. This form of neuronavigation can be applied in every neurosurgical centre. Owing to its rapid application it is also suitable for cases of emergency. The neurosurgical approach can be centred precisely over this lesion providing for a minimally invasive operation. The method has proved its efficacy in numerous cases of haematomas and cystic lesions. (author)

  16. Laser surface treatment of plasma-sprayed yttria-stabilized zirconia coatings

    Directory of Open Access Journals (Sweden)

    Pinto, M. A.

    2005-12-01

    Full Text Available Un equipo láser continuo de CO2, con potencia nominal de 1 kW, se utilizó para sellar la superficie revestida con ZrO2 8 % Y2O3 por proyección por plasma sobre un substrato de acero AISI 1045. Se investigaron los efectos del tratamiento de fusión con láser sobre la microestrutura y la resistencia a la corrosión del recubrimiento. La resistencia a la corrosión se analizó por medidas electroquímicas en una solución de NaCl al 3 %. Las micrografias mostraron que la superficie del revestimiento presentó varias grietas pequeñas, sin embargo, no fueron observados poros. La microestructura de la capa sellada presentó una estructura en forma de columnas con crecimiento perpendicular a la superficie libre. El sellado a láser mejora la resistencia a la corrosión de los recubrimientos y aumenta la microdureza.

    Un equipo láser continuo de CO2, con potencia nominal de 1 kW, se utilizó para sellar la superficie revestida con ZrO2 8 % Y2O3 por proyección por plasma sobre un substrato de acero AISI 1045. Se investigaron los efectos del tratamiento de fusión con láser sobre la microestrutura y la resistencia a la corrosión del recubrimiento. La resistencia a la corrosión se analizó por medidas electroquímicas en una solución de NaCl al 3 %. Las micrografias mostraron que la superficie del revestimiento presentó varias grietas pequeñas, sin embargo, no fueron observados poros. La microestructura de la capa sellada presentó una estructura en forma de columnas con crecimiento perpendicular a la superficie libre. El sellado a láser mejora la resistencia a la corrosión de los recubrimientos y aumenta la microdureza.

  17. Empleo de cromitas refractarias para la obtención de fundentes aglomerados utilizados en la soldadura automática por arco sumergido (SAW

    Directory of Open Access Journals (Sweden)

    Perdomo-González, L.

    2003-08-01

    Full Text Available In the present work high carbon ferrochrome (load ferrochrome and slags are obtained, starting frora the métallurgie reductive processing of refractory chromites. The obtaining of alloys and slags is studied using an experiment design based in the relationships among components. The chemical compositions of alloys and slags guarantee their application for the conformation of alloys loads and matrix fluxes amassed for the superficial filling by means of submerged arc welding (SAW. The melting-reduction process is carried out in an electric arc furnace.

    En el presente trabajo se obtienen ferrocromo de alto carbono (ferrocromo de carga y escorias a partir del proceso de reducción de cromitas refractarias. Mediante la utilización de un diseño de experimento de relaciones entre componentes, se estudia la obtención de aleaciones y escorias. La composición química de ambas garantiza su aplicación para la conformación de cargas aleantes y matrices de fundentes aglomerados, para el relleno superficial mediante soldadura automática por arco sumergido (SAW. El proceso de fusión-reducción se realiza en un horno eléctrico de arco.

  18. Differentiation between Superficial and Deep Lobe Parotid Tumors by Magnetic Resonance Imaging: Usefulness of the Parotid Duct Criterion

    Energy Technology Data Exchange (ETDEWEB)

    Imaizumi, A.; Kuribayashi, A.; Okochi, K.; Yoshino, N.; Kurabayashi, T. (Oral and Maxillofacial Radiology, Graduate School, Tokyo Medical and Dental Univ., Tokyo (Japan)); Ishii, J. (Maxillofacial Surgery, Graduate School, Tokyo Medical and Dental Univ., Tokyo (Japan)); Sumi, Y. (Division of Oral and Dental Surgery, Dept. of Advanced Medicine, National Center for Geriatrics and Gerontology, Aichi (Japan))

    2009-08-15

    Background: The location of a parotid tumor affects the choice of surgery, and there is a risk of damaging the facial nerve during surgery. Thus, differentiation between superficial and deep lobe parotid tumors is important for appropriate surgical planning. Purpose: To evaluate the usefulness of using the parotid duct, in addition to the retromandibular vein, for differentiating between superficial and deep lobe parotid tumors on MR images. Material and Methods: Magnetic resonance images of 42 parotid tumors in 40 patients were reviewed to determine whether the tumor was located in the superficial or deep lobe. In each case, the retromandibular vein and the parotid duct were used to locate the tumor. The parotid duct was only used in cases where the tumor and the duct were visualized on the same image. Results: Using the retromandibular vein criterion, 71% of deep lobe and 86% of superficial lobe tumors were correctly diagnosed, providing an accuracy of 81%. However, the accuracy achieved when using the parotid duct criterion was 100%, although it could be applied to only 28 of the 42 cases. Based on these results, we defined the following diagnostic method: the parotid duct criterion is first applied, and for cases in which it cannot be applied, the retromandibular vein criterion is used. The accuracy of this method was 88%, which was better than that achieved using the retromandibular vein criterion alone. Conclusion: The parotid duct criterion is useful for determining the location of parotid tumors. Combining the parotid duct criterion with the retromandibular vein criterion might improve the diagnostic accuracy of parotid tumor location compared to using the latter criterion alone

  19. Differentiation between Superficial and Deep Lobe Parotid Tumors by Magnetic Resonance Imaging: Usefulness of the Parotid Duct Criterion

    International Nuclear Information System (INIS)

    Imaizumi, A.; Kuribayashi, A.; Okochi, K.; Yoshino, N.; Kurabayashi, T.; Ishii, J.; Sumi, Y.

    2009-01-01

    Background: The location of a parotid tumor affects the choice of surgery, and there is a risk of damaging the facial nerve during surgery. Thus, differentiation between superficial and deep lobe parotid tumors is important for appropriate surgical planning. Purpose: To evaluate the usefulness of using the parotid duct, in addition to the retromandibular vein, for differentiating between superficial and deep lobe parotid tumors on MR images. Material and Methods: Magnetic resonance images of 42 parotid tumors in 40 patients were reviewed to determine whether the tumor was located in the superficial or deep lobe. In each case, the retromandibular vein and the parotid duct were used to locate the tumor. The parotid duct was only used in cases where the tumor and the duct were visualized on the same image. Results: Using the retromandibular vein criterion, 71% of deep lobe and 86% of superficial lobe tumors were correctly diagnosed, providing an accuracy of 81%. However, the accuracy achieved when using the parotid duct criterion was 100%, although it could be applied to only 28 of the 42 cases. Based on these results, we defined the following diagnostic method: the parotid duct criterion is first applied, and for cases in which it cannot be applied, the retromandibular vein criterion is used. The accuracy of this method was 88%, which was better than that achieved using the retromandibular vein criterion alone. Conclusion: The parotid duct criterion is useful for determining the location of parotid tumors. Combining the parotid duct criterion with the retromandibular vein criterion might improve the diagnostic accuracy of parotid tumor location compared to using the latter criterion alone

  20. Excimer laser superficial keratectomy for proud nebulae in keratoconus.

    Science.gov (United States)

    Moodaley, L; Liu, C; Woodward, E G; O'Brart, D; Muir, M K; Buckley, R

    1994-06-01

    Contact lens intolerance in keratoconus may be due to the formation of a proud nebula at or near the apex of the cone. Excimer laser superficial keratectomy was performed as an outpatients with proud nebulae as treatment patients with proud nebulae as treatment for their contact lens intolerance. The mean period of contact lens wear before the development of intolerance was 13.4 years (range 2 to 27 years). Following the development of intolerance, three patients abandoned contact lens wear in the affected eye while the remainder experienced a reduction in comfortable wearing time (mean = 3.75 hours; range: 0-14 hours). All patients had good potential Snellen visual acuity with a contact lens of 6/9 (nine eyes) and 6/12 (one eye). The proud nebulae were directly ablated with a 193 nm ArF excimer laser using a 1 mm diameter beam. Between 100-150 pulses were sufficient to ablate the raised area. Patients experienced no pain during the procedure and reported minimal discomfort postoperatively. In all cases flattening of the proud nebulae was achieved. Seven patients were able to resume regular contact lens wear (mean wearing time = 10.17 hours; range 8 to 16 hours). In three patients, resumption of contact lens wear was unsuccessful because of cone steepness. All patients achieved postoperative Snellen visual acuity of 6/12 or better with a contact lens. Four patients experienced a loss of one line in Snellen acuity. The mean follow up period was 8.3 months (range 2 to 17 months). Excimer laser superficial keratectomy is a useful technique for the treatment of contact lens intolerance caused by proud nebulae in patients with keratoconus. Penetrating keratoplasty is thus avoided.

  1. Sensoriamento remoto como subsídio à modelagem do balanço energético superficial

    Directory of Open Access Journals (Sweden)

    Vassiliki Terezinha Galvão Boulomytis

    2010-09-01

    Full Text Available O balanço energético superficial interfere no funcionamento do sistema terrestre através da relação existente entre a água e a energia solar e do modo como ocorre o seu processo de partição. Para a sua estimativa, modelagens vêm sendo realizadas utilizando-se de um ou mais sensores com diferentes resoluções, a fim de se obter dados com resoluções temporal e espacial adequadas a uma escala local. Neste estudo serão apresentados modelos para estimar a evapotranspiração e outros parâmetros biofísicos através do balanço energético superficial com a utilização dos sensores MODIS e AMSR-E.

  2. Construcción de un espacio deportivo con paredes de superficie reglada de cerámica armada

    Directory of Open Access Journals (Sweden)

    Vázquez Rodríguez, José A.

    2003-06-01

    Full Text Available This article tackles the construction process of a structure corresponding to the sports space of La Coruña University. It treats an uncommon solution consisting of supporting walls of I foot thick perforated brick masonry, that are folded, to form a surface of double curvature giving the walls stability, as they reach the height of 10 metres. The mentioned walls , apart from constituting the space closure, serve to support the structure of the covering which consists of a space truss of semiocthedric pilable modules conformed to hollow tubular pieces of laminated wood. This work manifests the interest and the validity of the use of reinforced ceramics f or the structural elements • as it efficiently umites an optimal mechanical behaviour with some indubitable formal possibililies. It is difficult to justify the omission of the use of this technique in the contemporary architecture.El presente artículo aborda el pro ceso constructivo de la estructura correspondiente a un espacio deportivo de la Universidad de A Coruña. Se trata de una solución singular constituida por muros portantes de fábrica armada de ladrillo perforado con un espesor de J pie, que se "pliegan" formando una superficie de doble curvatura al objeto de dotarlos de estabilidad. pues llegan a alcanzar los 10m de altura. Dichos muros. además de constituir el cerramiento del espacio. sirven para la sustentación de la estructura de cubierta. constituida por una malla espacial de módulos semioctaédricos apilables conformados con piezas tubulares huecas de madera laminada. Dicha obra pon e de manifiesto el interés y la validez de la utilización de la cerámica armada para la construcción de elementos estructurales. pues aúna de forma eficiente un óptimo comportamiento mecánico con unas indudables posibilidades formales . En consecuencia. el olvido de esta técnica dentro del panorama de la arquitectura con temporánea. resulta difícilmente justificable.

  3. Evaluación del nivel de contaminación de superficies y la eficacia de productos desinfectantes a corto y largo plazo. Nuevos métodos

    OpenAIRE

    Ríos Castillo, Abel Guillermo

    2013-01-01

    La prevención de la contaminación bacteriana desde las superficies en los ambientes de elaboración de alimentos, industrias de este sector y ambientes domésticos, requiere de productos desinfectantes que sean efectivos frente a distintas especies microbianas, que sean seguros durante su empleo y que tengan acción bactericida residual para proteger a las superficies de la adhesión bacteriana. Asimismo, el empleo de superficies con propiedades antibacterianas que inhiban la formación de biofilm...

  4. Tensão superficial estática de soluções aquosas com óleos minerais e vegetais utilizados na agricultura Surface tension of mineral oils and vegetable oils

    Directory of Open Access Journals (Sweden)

    Cristina G. de Mendonça

    2007-01-01

    Full Text Available O trabalho teve como objetivo avaliar a tensão superficial estática de soluções aquosas com formulações de óleos minerais e vegetais emulsionáveis utilizados como adjuvantes na agricultura. Os óleos minerais e vegetais, quando adicionados aos produtos fitossanitários, podem imprimir características desejáveis à calda de pulverização, como reduzir a tensão superficial em soluções aquosas, possibilitar maior contato da calda com a superfície vegetal ou reduzir o potencial de deriva durante as pulverizações. Foram testados os seguintes produtos comerciais: óleos minerais (Assist, Attach, Dytrol, Iharol, Mineral Oil, Spinner, Sunspray-E e Triona e óleos vegetais (Agrex'oil Vegetal, Crop Oil, Natur'l Óleo, Óleo Vegetal Nortox e Veget Oil, todos com registro de uso na agricultura. A tensão superficial das soluções aquosas foi avaliada em 11 concentrações para cada produto (0,025; 0,05; 0,1; 0,25; 0,5; 0,75; 1,0; 1,5; 2,0; 2,5 e 3,0% v/v. Essa propriedade dos óleos minerais e dos óleos vegetais foi estimada medindo-se a massa das gotas formadas na extremidade de uma bureta. Ao conjunto de dados obtidos para cada produto, na avaliação da tensão superficial, foram determinadas as análises de variância e de regressão, ajustando-se os dados ao Modelo de Mitscherlich. Entre os óleos minerais, destacaram-se os produtos: Assist, Dytrol, Iharol e Mineral Oil por apresentarem as menores tensões superficiais mínimas estimadas pelo Modelo, respectivamente, 29,255; 28,442; 26,097 e 28,584 mN m-1. Os óleos vegetais que apresentaram os menores valores de tensão superficial mínima estimados pelo Modelo, foram: Agrex' oil Vegetal (27,716 mN m-1, Natur'l óleo (28,216 mN m-1, Veget Oil (27,308 mN m-1 e Crop Oil (29,964 mN m-1.The aim of this work was to evaluate the surface tension of water emulsion with mineral oils and vegetable oils used as adjuvant. The mineral and vegetable oils when added to the agrochemicals can

  5. Epitelización inducida por células troncales derivadas del tejido adiposo

    Directory of Open Access Journals (Sweden)

    M. Meruane

    2014-06-01

    Full Text Available El tratamiento de lesiones con pérdida de tejido cutáneo ha mejorado notablemente con el advenimiento de la bioingeniería tisular. Una alternativa en desarrollo es la utilización de sustitutos dérmicos combinados con células troncales derivadas del tejido adiposo autólogo. Estudios previos nos muestran que con esta técnica es posible optimizar la angiogénesis y la síntesis de colágeno, sin embargo potenciar la epitelización es un tema pendiente por resolver. En el presente estudio evaluamos la progresión y diferenciación epitelial en un período de tiempo prologando. Obtuvimos las células troncales a partir del tejido adiposo (ASC de la región inguinal de 4 ratas Sprague Dawley. Cultivamos las células frescas en una matriz de Integra® durante un período total de 48 horas, y las marcamos con un vector lentiviral-GFP (proteína fluorescente verde. Posteriormente, injertamos en las mismas ratas la matriz dérmica con células troncales y un implante contralateral sin células, como control. A las 4 semanas, evaluamos el avance epitelial mediante planimetría de superficie e histología. Los resultados macroscópicos muestran que el cierre de la herida por contracción de los bordes no tiene diferencias significativas (82,63% ± 3,4% vs. 80,66% ± 3,89%; p=0,08, pero el cierre por epitelización fue significativamente mayor en el lado intervenido con ASCs (93,47% ± 5,98% vs. 79,88% ± 6,28%; p=0,0028. Todas las muestras obtuvieron tinción positiva para el anticuerpo anti-citoqueratina 34βE12 y el avance epitelial lineal cuantificado por microscopía resultó significativamente mayor en el lado con ASCs (6408 ± 275μm vs. 5375 ± 250μm; p < 0,001. Identificamos las células GFP positivas formando parte de la dermis regenerada, no así en la epidermis. En conclusión, las células troncales derivadas del tejido adiposo autólogo sembradas en una matriz de Integra® aumentan la formación epitelial significativamente

  6. In vitro evaluation of human dental enamel surface roughness bleached with 35% carbamide peroxide and submitted to abrasive dentifrice brushing Avaliação in vitro da rugosidade superficial do esmalte dental humano clareado com peróxido de carbamida a 35% e submetido à escovação com dentifrícios abrasivos

    Directory of Open Access Journals (Sweden)

    Claudia Cia Worschech

    2003-12-01

    average" iniciais e a cada intervalo de 7 dias após o início do tratamento clareador. O clareamento foi realizado na superfície dos fragmentos por 1 hora semanalmente, e os tratamentos superficiais, por 3 minutos diariamente. No restante do tempo, os espécimes eram armazenados em receptáculos individuais com saliva artificial. A análise de variância e o teste de Tukey revelaram diferenças estatísticas significantes na rugosidade superficial em função do tempo. G2 e G3 demonstraram um aumento nos valores de rugosidade; G1 e G4 não apresentaram diferenças estatísticas. O clareamento com peróxido de carbamida a 35% não altera a rugosidade superficial do esmalte humano, mas, quando associado ao tratamento superficial com abrasivos, ocorre um aumento significante da rugosidade superficial.

  7. [Superficial mycoses: casuistry of the Mycology Department of the Instituto Nacional de Higiene "Rafael Rangel", Caracas, Venezuela (2001-2014)].

    Science.gov (United States)

    Capote, Ana María; Ferrara, Giuseppe; Panizo, María Mercedes; García, Nataly; Alarcón, Víctor; Reviakina, Vera; Dolande, Maribel

    2016-03-01

    The superficial mycoses are very common infectious diseases and therefore are a frequent reason for medical consultation. The aim of this study was to determine the diagnostic frequency of superficial mycoses in the Mycology Department of the Instituto Nacional de Higiene "Rafael Rangel" during 14 years (2001-2014). A retrospective cross-sectional study was performed to review the mycological records of patients with presumptive diagnosis of superficial mycosis. Nails, hairs and epidermal scales were the processed samples. The identification of fungi was performed by macro and microscopic observation of colonies and biochemical and physiological tests, as required of the isolated agent. For the investigation of Malassezia spp. only direct examination was performed. Of the 3 228 samples processed, 1 098 (34%) were positive and their distribution according to the etiological agent was: dermatophytes 79.5%; 10.9% yeasts; non-dermatophytes fungi 5.1% and 4.5% Malassezia spp. The most frequently isolated dermatophyte was Trichophyton rubrum Complex (70.1%), followed by T mentagrophytes complex (15.1%), Microsporum canis (9.4%) and Epidermophyton floccosum (4%). The most frequent ringworms Were: Tinea unguium (66.8%), followed by Tineapedis (16.4%) and Tinea capitis (8.1%). Candida parapsilosis complex (37.5%) was the most frequently isolated yeast and Fusarium spp. (53.6%) was the most isolated among non-dermatophyte fungi, followed by Aspergillus spp. (19.6%) and Acremonium spp. (10.7%). The identification of the etiological agent is essential to guide appropriate treatment. This study constitutes an important contribution to the knowledge of the epidemiology of superficial mycoses in our country.

  8. Determinación de las condiciones experimentales óptimas de un acero AISI 4140 nitrurado por plasma postdescarga micro-ondas

    Directory of Open Access Journals (Sweden)

    Medina-Flores, A.

    2005-12-01

    Full Text Available AISI 4140 steel pieces were nitrided by an experimental reactor made in laboratory. A series of runs were to carry out to find the correct parameters below the point of transformation eutectoide (590 °C, which a compact, homogeneous and harder nitrided layer was formed on the top of the surface. Several characterizations techniques were used to analize the microsctructural change, such as, optical microscopy (OM, microhardness Vickers, X-Ray diffraction (DRX. The results showed the formation of a compact and homogeneous layer formed by a mixture of ε-Fe2,3N and γ’-Fe4N iron nitrides whit an average of 12 μm of thickness. The Vickers results showed a value of 1100 Hv on the top of the surface a concentration profile of microhardness is observed from the top of the surface to the core of the material.

    Piezas de acero AISI 4140 fueron nitruradas en un reactor experimental fabricado en el laboratorio. Para determinar los valores de los parámetros ideales de nitruración con los cuáles se obtuvo un mayor espesor, homogeneidad y dureza de la capa nitrurada, se llevaron a cabo una serie de experimentos, a temperaturas por debajo del punto de transformación eutectoide (590 °C. Para determinar el cambio microestructural de las muestras nitruradas, se analizaron, mediante diferentes técnicas de caracterización tales como microscopía óptica (MO, microdureza Vickers y difracción de rayos X (DRX. Los resultados mostraron la formación de una capa compacta y homogénea de 12 μm de espesor formada por los nitruros ε-Fe2,3N y γ’-Fe4N sobre la superficie del material. Los resultados de microdureza vickers mostraron un valor máximo de 1.100 Hv sobre la capa nitrurada observándose un perfil de microdureza de la superficie hacia el interior del material.

  9. Standard hardness conversion tables for metals relationship among brinell hardness, vickers hardness, rockwell hardness, superficial hardness, knoop hardness, and scleroscope hardness

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 Conversion Table 1 presents data in the Rockwell C hardness range on the relationship among Brinell hardness, Vickers hardness, Rockwell hardness, Rockwell superficial hardness, Knoop hardness, and Scleroscope hardness of non-austenitic steels including carbon, alloy, and tool steels in the as-forged, annealed, normalized, and quenched and tempered conditions provided that they are homogeneous. 1.2 Conversion Table 2 presents data in the Rockwell B hardness range on the relationship among Brinell hardness, Vickers hardness, Rockwell hardness, Rockwell superficial hardness, Knoop hardness, and Scleroscope hardness of non-austenitic steels including carbon, alloy, and tool steels in the as-forged, annealed, normalized, and quenched and tempered conditions provided that they are homogeneous. 1.3 Conversion Table 3 presents data on the relationship among Brinell hardness, Vickers hardness, Rockwell hardness, Rockwell superficial hardness, and Knoop hardness of nickel and high-nickel alloys (nickel content o...

  10. A prospective intra-individual evaluation of silk compared to Biobrane for the treatment of superficial burns of the hand and face.

    Science.gov (United States)

    Schiefer, Jennifer Lynn; Arens, Elena; Grigutsch, Daniel; Rath, Rebekka; Hoffmann, Alexandra; Fuchs, Paul Christian; Schulz, Alexandra

    2017-05-01

    An ever-increasing number of commercially available dressings have been applied to treat superficial burns with the aim to reduce pain and inflammation and lead to a fast wound healing and scar reduction. Nevertheless the search for cheap and effective wound dressing proceeds. Dressilk ® consisting of silkworm silk showed good results for wound healing in regards to scarring, biocompatibility and reduction of inflammation and pain. Therefore it seemed to be an interesting product for the treatment of superficial burns. In a prospective intra-individual study the healing of superficial burns was evaluated after the treatment with Dressilk ® and Biobrane ® in 30 patients with burns of the hand and face. During wound healing pain, active bleeding, exudation, dressing change and inflammation were evaluated using the Verbal Rating Scale 1-10. Three months later scar appearance was assessed by VSS (Vancouver Scar Scale) and POSAS (Patient and Observer Scar Scale). With regard to re-epithelialization, pain, inflammation and acute bleeding both dressings were equivalent. High subjective satisfaction rates were reported for both Dressilk ® and Biobrane ® dressings in regard to comfort and mobility of the face. Biobrane ® , applied as a glove was subjectively preferred for burns of the hand. Regarding their cost efficiency Dressilk ® was clearly superior to Biobrane ® . Long-term results were similar. The "ideal" wound dressing maximizes patients' comfort while reducing pain and promoting wound healing. Dressilk ® and Biobrane ® both provided an effective and safe healing environment, showing low overall complication rates with respect to infection and exudation on superficial burns of the hand and face. Therefore Dressilk ® , being clearly superior to Biobrane ® in cost efficiency is an interesting alternative especially for the treatment of superficial burns of faces. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

  11. Medida de distensibilidad en pulmones aislados de rata: demostración del efecto de la tensión superficial

    OpenAIRE

    Araya, Romina Elizabeth; De Francesco, Pablo Nicolás; Smaldini, Paola Lorena; Iarossi, M. B.; Lastra, María Laura; Pérez, Pablo Fernando; Rebolledo, Alejandro; Rinaldi, Gustavo

    2016-01-01

    Uno de los TP de nuestra Cátedra consiste en la medición de la distensibilidad de un pulmón aislado de rata. La interfase aire-líquido en la superficie alveolar determina la existencia de tensión superficial (TS) en el líquido, la cual disminuye la distensibilidad pulmonar (DP). Si bien el surfactante pulmonar disminuye la TS, ésta continúa siendo importante. Los métodos para medir la TS de un líquido suelen ser bastante dificultosos (Ej: balanza de torsión de Du Noüy). El objetivo de este...

  12. Celulitis por citomegalovirus

    Directory of Open Access Journals (Sweden)

    A. Ruiz Lascano

    2002-12-01

    Full Text Available Las lesiones cutáneas por citomegalovirus (CMV son infrecuentes y a menudo una manifestación tardía de una enfermedad sistémica, que generalmente anuncia un curso fatal. Comunicamos un caso de celulitis por CMV: una mujer de 70 años con trasplante renal efectuado 1 mes antes de la consulta, terapia inmunosupresora con ciclosporina A y metilprednisona. La paciente ingresó por fiebre, dolor e impotencia funcional en pierna derecha. Comprobamos la existencia de una placa de 8 por 4 cm eritematoedematosa. La tratamos con antibióticos sin mejoría, por lo que realizamos un estudio histopatológico de piel que mostró cambios citopáticos compatibles con infección por CMV. Los cultivos bacteriológicos y micológicos fueron negativos. La inmunohistoquímica específica para CMV y el estudio de reacción en cadena de la polimerasa (PCR de la biopsia de piel fueron positivas, al igual que la antigenemia. El tratamiento con ganciclovir produjo la mejoría del cuadro clínico. En la literatura revisada no hemos encontrado la celulitis como manifestación de enfermedad cutánea por CMV.

  13. Comparison of four different nerve conduction techniques of the superficial fibular sensory nerve.

    Science.gov (United States)

    Saffarian, Mathew R; Condie, Nathan C; Austin, Erica A; Mccausland, Katie E; Andary, Michael T; Sylvain, James R; Mull, Iian R; Zemper, Eric D; Jannausch, Mary L

    2017-09-01

    There are many different nerve conduction study (NCS) techniques to study the superficial fibular sensory nerve (SFSN). We present reference distal latency values and comparative data regarding 4 different NCS for the SFSN. Four different NCS techniques, Spartan technique, Izzo techniques (medial and intermediate dorsal cutaneous branches), and Daube technique, were performed on (114) healthy volunteers. A total of 108 subjects with 164 legs were included. The mean latency of the Spartan technique was longest (3.9 ± 0.3 ms) while the Daube technique was the shortest (3.6 ± 0.7 ms). The mean amplitude of the Daube technique displayed the highest (15.2 ± 8.2 μV) with the Spartan technique having the lowest (8.7 ± 4.2 μV). Among the absent sensory nerve action potentials (SNAPs), the Spartan technique was absent only twice (1.2%) and the Izzo Medial technique was absent more than the other techniques (2.9%). All 4 techniques were reliable methods for obtaining the superficial fibular nerve SNAP, present in 95% of individuals. Muscle Nerve 56: 458-462, 2017. © 2017 Wiley Periodicals, Inc.

  14. Comportamiento de las herramientas de conformado con recubrimientos TiAlN crecido por Magnetrón Sputtering Tríodo

    Directory of Open Access Journals (Sweden)

    Diana Marcela Devia-Narváez

    2015-01-01

    Full Text Available Esta investigación se enfoca en el análisis tribológico de los recubrimientos de nitruro de titanio aluminio (TiAlN depositad os por la técnica Magnetrón Sputtering Tríodo, cuando se utilizan como ca pa protectora en herr amientas de conformado. El análisis se rea liza a partir de las propiedades microestructurales que influyen direc tamente en el comportamiento tribológico. Se observó que los me canismos de desgaste predominantes en la superficie son la delaminación y la tribo-oxidación; se determinó un incremento en la vida úti l de la herramienta siendo lo s recubrimientos duros u na excelente alter nativa en la industria metalmecánica.

  15. Concentración ideal de electrolitos en la superficie de suelos de los municipios de Palmira, El Cerrito y Guacarí en el Valle del Cauca, Colombia

    Directory of Open Access Journals (Sweden)

    Edgar Enrique Madero Morales

    2008-10-01

    Full Text Available Tras añadir cantidades variables de CaCl2, equivalentes a la Concentración Crítica de Coagulación (CCC, llamada concentración de electrolitos ideal, se evaluó el movimiento de agua en muestras de suelo superficial y se relacionó con los contenidos de carbono orgánico, arcilla y pH en 112 muestreos distribuidos en esquema logarítmico sobre 84.000 ha; se utilizó el programa ArcGIS 8.3 para producir mapas geoestadísticos. La CCC mejoró significativamente la conductividad hidráulica saturada en la mayoría de los suelos analizados y mostró correlación inversa con el contenido de arcilla y el pH, y directa con el porcentaje de carbono orgánico. Por interpolación se obtuvieron las áreas más susceptibles a sellarse con agua lluvia.

  16. Improving superficial target delineation in radiation therapy with endoscopic tracking and registration

    Energy Technology Data Exchange (ETDEWEB)

    Weersink, R. A.; Qiu, J.; Hope, A. J.; Daly, M. J.; Cho, B. C. J.; DaCosta, R. S.; Sharpe, M. B.; Breen, S. L.; Chan, H.; Jaffray, D. A. [Radiation Medicine Program, Princess Margaret Hospital, Toronto, Ontario M5G 2M9 (Canada) and Ontario Cancer Institute, University Health Network, Toronto, Ontario M5G 2M9 (Canada); Radiation Medicine Program, Princess Margaret Hospital, Toronto, Ontario M5G 2M9 (Canada); Radiation Medicine Program, Princess Margaret Hospital, Toronto, Ontario M5G 2M9, Canada and Department of Radiation Oncology, University of Toronto, Toronto, Ontario M5G 2M9 (Canada); Radiation Medicine Program, Princess Margaret Hospital, Toronto, Ontario M5G 2M9 (Canada); Radiation Medicine Program, Princess Margaret Hospital, Toronto, Ontario M5G 2M9 (Canada) and Department of Radiation Oncology, University of Toronto, Toronto, Ontario M5G 2M9 (Canada); Radiation Medicine Program, Princess Margaret Hospital, Toronto, Ontario M5G 2M9, Canada and Ontario Cancer Institute, University Health Network, Toronto, Ontario M5G 2M9 (Canada); Radiation Medicine Program, Princess Margaret Hospital, Toronto, Ontario M5G 2M9 (Canada) and Department of Radiation Oncology, University of Toronto, Toronto, Ontario M5G 2M9 (Canada); Radiation Medicine Program, Princess Margaret Hospital, Toronto, Ontario M5G 2M9 (Canada); Radiation Medicine Program, Princess Margaret Hospital, Toronto, Ontario M5G 2M9 (Canada); Department of Radiation Oncology, University of Toronto, Toronto, Ontario M5G 2M9 (Canada) and Ontario Cancer Institute, University Health Network, Toronto, Ontario M5G 2M9 (Canada)

    2011-12-15

    Purpose: Target delineation within volumetric imaging is a critical step in the planning process of intensity modulated radiation therapy. In endoluminal cancers, endoscopy often reveals superficial areas of visible disease beyond what is seen on volumetric imaging. Quantitatively relating these findings to the volumetric imaging is prone to human error during the recall and contouring of the target. We have developed a method to improve target delineation in the radiation therapy planning process by quantitatively registering endoscopic findings contours traced on endoscopic images to volumetric imaging. Methods: Using electromagnetic sensors embedded in an endoscope, 2D endoscopic images were registered to computed tomography (CT) volumetric images by tracking the position and orientation of the endoscope relative to a CT image set. Regions-of-interest (ROI) in the 2D endoscopic view were delineated. A mesh created within the boundary of the ROI was projected onto the 3D image data, registering the ROI with the volumetric image. This 3D ROI was exported to clinical radiation treatment planning software. The precision and accuracy of the procedure was tested on two solid phantoms with superficial markings visible on both endoscopy and CT images. The first phantom was T-shaped tube with X-marks etched on the interior. The second phantom was an anatomically correct skull phantom with a phantom superficial lesion placed on the pharyngeal surface. Markings were contoured on the endoscope images and compared with contours delineated in the treatment planning system based on the CT images. Clinical feasibility was tested on three patients with early stage glottic cancer. Image-based rendering using manually identified landmarks was used to improve the registration. Results: Using the T-shaped phantom with X-markings, the 2D to 3D registration accuracy was 1.5-3.5 mm, depending on the endoscope position relative to the markings. Intraobserver standard variation was 0

  17. New methodology for mechanical characterization of human superficial facial tissue anisotropic behaviour in vivo.

    Science.gov (United States)

    Then, C; Stassen, B; Depta, K; Silber, G

    2017-07-01

    Mechanical characterization of human superficial facial tissue has important applications in biomedical science, computer assisted forensics, graphics, and consumer goods development. Specifically, the latter may include facial hair removal devices. Predictive accuracy of numerical models and their ability to elucidate biomechanically relevant questions depends on the acquisition of experimental data and mechanical tissue behavior representation. Anisotropic viscoelastic behavioral characterization of human facial tissue, deformed in vivo with finite strain, however, is sparse. Employing an experimental-numerical approach, a procedure is presented to evaluate multidirectional tensile properties of superficial tissue layers of the face in vivo. Specifically, in addition to stress relaxation, displacement-controlled multi-step ramp-and-hold protocols were performed to separate elastic from inelastic properties. For numerical representation, an anisotropic hyperelastic material model in conjunction with a time domain linear viscoelasticity formulation with Prony series was employed. Model parameters were inversely derived, employing finite element models, using multi-criteria optimization. The methodology provides insight into mechanical superficial facial tissue properties. Experimental data shows pronounced anisotropy, especially with large strain. The stress relaxation rate does not depend on the loading direction, but is strain-dependent. Preconditioning eliminates equilibrium hysteresis effects and leads to stress-strain repeatability. In the preconditioned state tissue stiffness and hysteresis insensitivity to strain rate in the applied range is evident. The employed material model fits the nonlinear anisotropic elastic results and the viscoelasticity model reasonably reproduces time-dependent results. Inversely deduced maximum anisotropic long-term shear modulus of linear elasticity is G ∞,max aniso =2.43kPa and instantaneous initial shear modulus at an

  18. Una estrategia de revitalización impulsada por los comerciantes: simbiosis turismo y comercio en el casco histórico de Pontevedra

    Directory of Open Access Journals (Sweden)

    Sara María Torres Outón

    2013-01-01

    Full Text Available El pequeño comercio, especialmente aquel establecido en los cascos antiguos de las ciudades, ha sufrido grandes transformaciones. En las últimas décadas por los cambios en los hábitos de consumo y aparición de nuevos formatos comerciales y, recientemente, por la crisis económica. Hace más de treinta años aparecieron las grandes superficies comerciales que combinaron con acierto ocio y compra. En esta línea, los comerciantes de la Zona Monumental de Pontevedra apostaron por desarrollar actividades y acciones de dinamización turística y comercial con el objetivo de atraer hacia el espacio comercial posibles compradores, tanto residentes como turistas. El análisis de las estrategias de desarrollo local emprendidas por ellos demuestra que la función turística es un aliado y complemento del desarrollo comercial. Los comerciantes fueron los primeros actores capaces de aprovechar turísticamente la riqueza patrimonial del espacio en el que desarrollan su labor. Para conocer cómo surgieron estas iniciativas y cómo evolucionaron fue necesario revisar documentación interna de la entidad y realizar entrevistas en profundidad con la directiva de la asociación de comerciantes. Este análisis ha permitido revelar la simbiosis turismo-comercio y descubrir nuevos yacimientos turísticos en la ciudad a través del conocimiento que de ella tienen quiénes viven, sienten y se identifican con el casco histórico: sus comerciantes.

  19. Photoluminescence of acupoint 'Waiqiu' in human superficial fascia

    International Nuclear Information System (INIS)

    Zhang Yuan; Yan Xiaohui; Liu Chenglin; Dang Ruishan; Zhang Xinyi

    2006-01-01

    The spectral characters of an acupuncture point named 'Waiqiu' in superficial fascia tissue have been studied by photoluminescence (PL) spectroscopy under the excitation of 457.9 nm. The PL around 'Waiqiu' acupuncture point consists of two sub-bands resulting from the flavin adenine dinucleotide (FAD) and phospholipids, and the porphyrins (including purine, isoxanthopterin and tryptophan), respectively. More emission due to FAD and phospholipids is found inside the acupuncture effect area of 'Waiqiu' than its marginal or outside acupuncture regions. The ratio of emission intensity of FAD and phospholipids to one of porphyrins gradually decreases along the direction away from the center of the acupuncture point. It implies that the component proportion changes between FAD, phospholipids and porphyrins around the 'Waiqiu' acupuncture point. We suggest that there might be a certain relationship between redox function of FAD and 'Waiqiu' acupuncture effect

  20. Investigación: Tipificación y tratamiento contable del nuevo derecho real de superficie en el Código Civil y Comercial Unificado de Argentina

    Directory of Open Access Journals (Sweden)

    Andrés Alberto Mancini

    2016-10-01

    Full Text Available Se describe el marco legal y contable de un derecho inédito previsto en elnuevo Código Civil y Comercial Unificado de Argentina, como es el «DerechoReal de Superficie». En el ámbito jurídico los objetivos del trabajo son:explorar los antecedentes legales del mismo en Latinoamérica y Europa,exponer su marco legal bajo la nueva legislación y sus principales lineamientosconceptuales y contractuales. En el ámbito contable: tipificar lanueva figura bajo las normas contables profesionales, e identificar su reconocimientocontable, medición y revelación en la contabilidad de los actoresinvolucrados, al momento inicial, cierre de ejercicio y extinción del derecho.Para responder a estos objetivos se recolectaron historiales y referenciasactuales de derecho privado en otros países. Se revisaron y analizaron loslineamientos de nuestro anterior Código Civil y Ley de Superficie Forestal,así como el articulado del nuevo Código, sus discusiones parlamentarias yopinión de expertos en la materia. Desde el punto de vista contable se indagaronlas diversas normas profesionales internacionales para poder plasmarel tratamiento contable apropiado. Finalmente se desarrolló una ejemplificaciónpráctica detallada para mayor comprensión del tema.El hallazgo más importante de la investigación se refiere a que su tratamientocontable tiene varias aristas, con un alcance transversal a normasprofesionales de diferente temática (Arrendamientos, Instrumentos Financieros, Propiedades de Inversión. Por otra parte, representa una nuevafigura jurídica más dinámica y flexible en el ámbito de los derechos reales,con importantes ventajas económicas en el ámbito del negocio inmobiliario

  1. Síntesis de silicatos de calcio por el método Pechini e intercambio iónico de alginato de sodio-cloruro de calcio

    Directory of Open Access Journals (Sweden)

    Katya Aradeli Flores-Garay

    2016-11-01

    Full Text Available Se sintetizaron muestras de silicatos de calcio, a partir de diferentes concentraciones de tetraetilortosilicato (TEOS y mediante la metodología Pechini, asistida con intercambio iónico a base de alginato de sodio y cloruro de calcio, seguido de un tratamiento térmico a 800 °C por 2 h. Las muestras A, B y C, que se obtuvieron utilizando 1,7 × 10−3 M, 3,4 × 10−3 M y 5,1 × 10−3 M de TEOS, respectivamente, y sin tratamiento térmico, se caracterizaron por análisis termogravimétrico (TGA y espectroscopia infrarroja con reflectancia total atenuada (FTIR-ATR. Por otra parte, las muestras A800, B800 y C800, que se obtuvieron usando un tratamiento térmico a 800 °C por 2 h, se caracterizaron por FTIR-ATR, área superficial específica por la técnica de adsorción de gas nitrógeno (BET, difracción de rayos X (DRX y por microscopia electrónica de barrido. Por espectroscopia FTIR-ATR se confirmó la presencia de enlaces Si-O-Si, indicativos de la formación de silicatos y de sílice en las muestras A800, B800 y C800. Los difractogramas indican que la muestra A800 contiene olivino (Ca2SiO4 en fase ortorrómbica y wollastonite-2 M (CaSiO3; la muestra B800 presentó, además de las fases anteriores, cuarzo (SiO2 en fase hexagonal, mientras que la muestra C800, obtenida con una mayor cantidad de TEOS, presentó las fases de wollastonita-2 M y larnita (Ca2SiO4.

  2. EXPANSIÓN URBANA Y TURISMO EN LA COMARCA DEL CAMPO DE CARTAGENA-MAR MENOR (MURCIA. IMPACTO EN EL SELLADO DEL SUELO

    Directory of Open Access Journals (Sweden)

    Asunción Romero Díaz

    2017-01-01

    Full Text Available En las últimas décadas, la comarca estudiada ha experimentado una expansión urbana sin precedentes motivada por el turismo residencial. Esto ha supuesto un notable impacto medioambiental. Para estudiar este proceso y sus impactos, se han analizado los tipos de viviendas y población, digitalizando las superficies urbanas de tres fechas (1956, 1981 y 2011 y estimando la longitud y superficie de la red viaria. La superficie de suelo sellada, por este tipo de usos se ha evaluado en un 16% con respecto al total. Consecuencia de lo anterior es el aumento en la frecuencia de las inundaciones.

  3. Processing of yttrium aluminosilicate (YAS glasses for dental composites Processamento de vidros de aluminosilicatos de ítrio (YAS para compósitos odontológicos

    Directory of Open Access Journals (Sweden)

    M. Velez

    2011-03-01

    Full Text Available Two series of silicate glasses were processed to micron-size, sub-micron size, and nanoparticles using three different milling systems: ball milling, attrition, and high-energy milling. The effect of milling time and media size on particle size and contamination were investigated in aqueous and isopropanol suspensions. The particle size was determined using a laser-diffraction particle size analyzer and scanning electron microscopy. The smallest glass particles with a median particle size of 0.3 µm were achieved by a two-step comminution process in a high energy mill.Foram moídas duas séries de vidros silicatos para a obtenção de partículas com dimensões nas faixas micrométrica, submicrométrica e nanométrica, utilizando três tipos distintos de processos de moagem: moagem em moinho de esferas, em atritor, e de alta energia. Foram investigados os efeitos do tempo e do tipo do meio de moagem no tamanho de partícula, em suspensões aquosas e em isopropanol. Foram utilizados um granulômetro com o princípio de difração de laser e um microscópio eletrônico de varredura para a determinação do tamanho de partícula. A distribuição de tamanho de partículas com o menor tamanho médio de partícula igual a 0,3 µm foi obtida para vidros submetidos ao processo de cominuição em duas etapas, utilizando um moinho de alta energia.

  4. Superficial plantar cutaneous sensation does not trigger barefoot running adaptations.

    Science.gov (United States)

    Thompson, M A; Hoffman, K M

    2017-09-01

    It has long been proposed that the gait alterations associated with barefoot running are mediated by alterations in sensory feedback, yet there has been no data to support this claim. Thus, the purpose of this study was to examine the role of superficial plantar cutaneous feedback in barefoot and shod running. 10 healthy active subjects (6 male, 4 female); mass: 65.2+9.7kg; age: 27+7.1years participated in this study. 10 over-ground running trials were completed in each of the following conditions: barefoot (BF), shod (SHOD), anesthetized barefoot (ANEST BF) and anesthetized shod (ANEST SHOD). For the anesthetized conditions 0.1-0.3mL of 1% lidocaine was injected into the dermal layer of the plantar foot below the metatarsal heads, lateral column and heel. 3-dimensional motion analysis and ground reaction force (GRF) data were captured as subjects ran over a 20m runway with a force plate at 12m. Kinematic and kinetic differences were analyzed via two-way repeated measure ANOVAs. The differences in gait between the BF and SHOD conditions were consistent with previous research, with subjects exhibiting a significant decrease in stride length and changing from rearfoot strike when SHOD to fore/midfoot strike when BF. Additionally, BF running was associated with decreased impact peak magnitudes and peak vertical GRFs. Despite anesthetizing the plantar surface, there was no difference between the BF and ANEST BF conditions in terms of stride length, foot strike or GRFs. Superficial cutaneous sensory receptors are not primarily responsible for the gait changes associated with barefoot running. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Thrombophlebitis of the penile superficial vein, penile mondor's disease: a case report

    Energy Technology Data Exchange (ETDEWEB)

    Park, Sang Hyun; Kim, Young Hwa; Kim, Doo Sang; Shin, Hyung Chul; Bae, Won Kyung; Kim, Il Young [Soonchunhyang University, Chunan (Korea, Republic of); Kim, Hyun Cheol [Kyung-Hee University, Seoul (Korea, Republic of)

    2007-07-15

    Mondor's disease is commonly known as thrombophlebitis of the superficial vein in the breast, and this disease occurs rarely in the penis. Despite extensive information about the clinical presentation and course of this disease, imaging findings for this disease are limited. We report gray scale and power Doppler sonographic findings of penile Mondor's disease.

  6. The relation between histological, tumor-biological and clinical parameters in deep and superficial leiomyosarcoma and leiomyoma.

    NARCIS (Netherlands)

    Pijpe, Justin; Broers, Gerben H Torn; Plaat, Boudewijn E Ch; Hundeiker, M; Otto, F; Mastik, Mirjam F; Hoekstra, Harald J; Graaf, Winette T A van der; van den Berg, Eva; Molenaar, Willemina M

    2002-01-01

    Purpose: Leiomyosarcomas (LMS) of deep and superficial tissues were examined to identify prognostic markers explaining their different biological behaviour and to define differences between cutaneous and subcutaneous LMS. LMS and leiomyomas (LM) of the skin were compared to and consistent

  7. Percutaneous transluminal angioplasty of the superficial femoral artery by retrograde catheterization via the popliteal artery

    DEFF Research Database (Denmark)

    Tønnesen, K H; Sager, P; Karle, A

    1988-01-01

    We report the results of 50 angioplasty procedures via the popliteal artery. A 3-year follow-up including control of blood pressures at ankle and toe levels show results comparable to reports in the literature. This new approach for angioplasty of the superficial femoral artery and eventually of ...

  8. Tensión superficial: un modelo experimental con materiales sencillos

    Directory of Open Access Journals (Sweden)

    Esteban Szigety

    2012-01-01

    Full Text Available En este trabajo se presenta una propuesta didáctica basada en una actividad experimental utilizando materiales de muy bajo costo, orientada a lograr que los alumnos comprendan e interpreten el fenómeno de tensión superficial conjuntamente con la importancia de la modelización en ciencias. Tiene como objetivo principal de enseñanza acercar al alumno a la mecánica de los fluidos estáticos y las fuerzas intermoleculares, combinando contenidos científicos con cuestiones cercanas al estudiante lo que proporciona una motivación adicional a la reflexión de la investigación científica.

  9. Too Deep or Not Too Deep?: A Propensity-Matched Comparison of the Analgesic Effects of a Superficial Versus Deep Serratus Fascial Plane Block for Ambulatory Breast Cancer Surgery.

    Science.gov (United States)

    Abdallah, Faraj W; Cil, Tulin; MacLean, David; Madjdpour, Caveh; Escallon, Jaime; Semple, John; Brull, Richard

    2018-07-01

    Serratus fascial plane block can reduce pain following breast surgery, but the question of whether to inject the local anesthetic superficial or deep to the serratus muscle has not been answered. This cohort study compares the analgesic benefits of superficial versus deep serratus plane blocks in ambulatory breast cancer surgery patients at Women's College Hospital between February 2014 and December 2016. We tested the joint hypothesis that deep serratus block is noninferior to superficial serratus block for postoperative in-hospital (pre-discharge) opioid consumption and pain severity. One hundred sixty-six patients were propensity matched among 2 groups (83/group): superficial and deep serratus blocks. The cohort was used to evaluate the effect of blocks on postoperative oral morphine equivalent consumption and area under the curve for rest pain scores. We considered deep serratus block to be noninferior to superficial serratus block if it were noninferior for both outcomes, within 15 mg morphine and 4 cm·h units margins. Other outcomes included intraoperative fentanyl requirements, time to first analgesic request, recovery room stay, and incidence of postoperative nausea and vomiting. Deep serratus block was associated with postoperative morphine consumption and pain scores area under the curve that were noninferior to those of the superficial serratus block. Intraoperative fentanyl requirements, time to first analgesic request, recovery room stay, and postoperative nausea and vomiting were not different between blocks. The postoperative in-hospital analgesia associated with deep serratus block is as effective (within an acceptable margin) as superficial serratus block following ambulatory breast cancer surgery. These new findings are important to inform both current clinical practices and future prospective studies.

  10. Engineering cartilaginous grafts using chondrocyte-laden hydrogels supported by a superficial layer of stem cells.

    Science.gov (United States)

    Mesallati, Tariq; Buckley, Conor T; Kelly, Daniel J

    2017-05-01

    During postnatal joint development, progenitor cells that reside in the superficial region of articular cartilage first drive the rapid growth of the tissue and later help direct the formation of mature hyaline cartilage. These developmental processes may provide directions for the optimal structuring of co-cultured chondrocytes (CCs) and multipotent stromal/stem cells (MSCs) required for engineering cartilaginous tissues. The objective of this study was to engineer cartilage grafts by recapitulating aspects of joint development where a population of superficial progenitor cells drives the development of the tissue. To this end, MSCs were either self-assembled on top of CC-laden agarose gels (structured co-culture) or were mixed with CCs before being embedded in an agarose hydrogel (mixed co-culture). Porcine infrapatellar fat pad-derived stem cells (FPSCs) and bone marrow-derived MSCs (BMSCs) were used as sources of progenitor cells. The DNA, sGAG and collagen content of a mixed co-culture of FPSCs and CCs was found to be lower than the combined content of two control hydrogels seeded with CCs and FPSCs only. In contrast, a mixed co-culture of BMSCs and CCs led to increased proliferation and sGAG and collagen accumulation. Of note was the finding that a structured co-culture, at the appropriate cell density, led to greater sGAG accumulation than a mixed co-culture for both MSC sources. In conclusion, assembling MSCs onto CC-laden hydrogels dramatically enhances the development of the engineered tissue, with the superficial layer of progenitor cells driving CC proliferation and cartilage ECM production, mimicking certain aspects of developing cartilage. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

  11. Influencia del relieve en las propiedades de un suelo afectado por incendio en el volcán El Pelado, Centro de México

    Directory of Open Access Journals (Sweden)

    Carlos Alejandro Pérez García

    2009-10-01

    Full Text Available La alteración de las propiedades físicas y químicas en sitios no quemados (SNQ y quemados (SQ, son dos aspectos importantes para el desarrollo del suelo y vegetación con respecto a tres porciones contrastantes del relieve. Se realizó un muestreo dirigido en suelos de áreas quemadas y no quemadas en una microcuenca, considerando tres posiciones en el relieve: a cauce, b dorso y c superficie cumbral de ladera. Los suelos de las áreas no quemadas fueron tomados a partir de un punto de referencia bajo las mismas condiciones de relieve, por lo que las muestras de suelos no quemados tuvieron un transecto con seis sitios de muestreo, mientras que en los suelos quemados se tuvieron tres transectos con quince sitios de muestreo. Los resultados obtenidos muestran que la densidad aparente (Da aumentó en la superficie cumbral y el cauce, como producto de la combustión de la materia orgánica en los SQ, en comparación con los SNQ, afectando la estructura del suelo y diminuyendo la porosidad total del suelo. La mayor cantidad de agregados se encontró en el cauce, predominando los micro y mesoagregados. Los suelos presentaron una ligera disminución en el pH en la zona del cauce y superficie cumbral, hubo un incremento en Ca2+, Mg2+ y K+, lo que indica que uno de los efectos del incendio fue liberar los elementos minerales que se vuelven más abundantes y estimulan el crecimiento de las plantas. La CIC disminuyó en la superficie cumbral pero aumentó ligeramente en la ladera y en el cauce atribuible al impacto de la combustión de la MO que aceleró el proceso de mineralización y favoreció el arrastre y depositación de arcillas y complejos húmicos en la ladera y cauce. El fósforo presentó una ligera disminución con respecto a los SNQ, localizándose la mayor cantidad de este nutrimento en el dorso de ladera y el cauce. El cauce y el dorso de ladera fueron las porciones de relieve que presentaron mayores diferencias atribuibles a que la quema

  12. Colloidal silver-based nanogel as nonocclusive dressing for multiple superficial pellet wounds.

    Science.gov (United States)

    Dharmshaktu, Ganesh Singh; Singhal, Aanshu; Pangtey, Tanuja

    2016-01-01

    A good dressing is mandatory to an uncomplicated wound healing, especially when foreign particles contaminate the wound. Various forms of dressing preparations are available for use and differ in chemical composition and efficacy. Silver has been a known agent with good antimicrobial and healing properties and recent times has seen an upsurge in various silver-based dressing supplements. We describe our report of use and efficacy of a silver nanoparticle- based gel dressing in the healing of multiple superficial firearm pellet wounds.

  13. DETECCIÓN Y CARACTERIZACIÓN POR MÉTODOS MOLECULARES DE AISLAMIENTOS COLOMBIANOS DE HERPESVIRUS BOVINO TIPO 1

    Directory of Open Access Journals (Sweden)

    D. Piedrahita

    2005-01-01

    Full Text Available La Rinotraqueitis Infecciosa Bovina (RIB es una enfermedad, altamente contagiosa, de distribución mundial, de origen viral, causada por el Herpesvirus Bovino-1 (BoHV-1. Produce alteraciones en el sistema respiratorio y reproductivo, lo que la convierte en una enfermedad con un gran impacto económico para los sistemas de producción ganadera. Este trabajo tuvo como objetivo caracterizar, mediante técnicas de biología molecular, tres aislamientos colombianos del BoHV-1 (dos de la sabana de Bogotá y uno de los Llanos Orientales. Los aislamientos fueron analizados con las enzimas de restricción Bam HI, Bst EII, Eco RI Pst I y Hind III. En este estudio también se implementó una rápida, sensitiva y específica prueba de PCR para la detección de tres glicoproteínas de superficie del Herpesvirus Bovino-1 (BoHV-1, cuyos fragmentos fueron secuenciados, lo que permitió encontrar homologías del 100% comparadas con los reportes del Gene Bank. Por medio del análisis con la enzima de restricción Hind III se clasificaron los aislamientos de la sabana de Bogotá como subtipo BoHV-1.2a y el de los Llanos Orientales como subtipo BoHV-1.1.

  14. Remoción de Fe y Mn en aguas naturales por adsorción-oxidación sobre clinoptilolita

    Directory of Open Access Journals (Sweden)

    Carolina Cuchimaque Lugo

    2013-01-01

    Full Text Available En el presente trabajo de investigación se comprueba la eficiencia en la remoción de Fe y Mn de aguas naturales por el empleo de un medio adsorbente que consiste de zeolita natural (clinoptilolita, recubierta con Fe 2O3 y MnO2 a partir de FeCl3 y MnSO4, respectivamente. La zeolita por su gran capacidad de intercambio de cationes es un excelente soporte de estos óxidos. El mecanismo de la remoción es por adsorción-oxidación de estos metales sobre la superficie de la capa de óxido que cubre el grano de zeolita. En las pruebas de remoción mediante un sistema de filtración se estudiaron las variables pH, concentraciones de Fe y Mn, caudal en el a fluente y altura de la capa de la zeolita, resultando las dos últimas ser las de mayor relevancia en la remoción. Se utilizaron concentraciones de 1,0-7,0 mg/L para Fe y de 0,5-3,0 mg/L para Mn, en un rango de pH de 6,0-8,0. La eficiencia de la remoción disminuye con el aumento en la concentración de Fe, especialmente a valores de pH altos (> 7,5, por la formación de precipitados de Fe2O3 causando aceleración en la saturación del medio. No se obtuvo una diferencia significativa sobre la remoción con el empleo de los dos tipos de recubrimiento, aunque a altas concentraciones de estos metales, con la capa de Fe 2O3 se obtuvieron porcentajes de remoción un poco mayores, pero la desventaja es que con este tipo de óxido se obtuvo menor corrida de los filtros por la saturación del medio.

  15. Portable exhauster POR-007/Skid E and POR-008/Skid F storage plan

    International Nuclear Information System (INIS)

    Nelson, O.D.

    1998-01-01

    This document provides storage requirements for 1,000 CFM portable exhausters POR-O07/Skid E and POR-008/Skid F. These requirements are presented in three parts: preparation for storage, storage maintenance and testing, and retrieval from storage. The exhauster component identification numbers listed in this document contain the prefix POR-007 or POR-008 depending on which exhauster is being used

  16. The analogy between dreams and the ancient art of memory is tempting but superficial.

    Science.gov (United States)

    Axmacher, Nikolai; Fell, Juergen

    2013-12-01

    Although the analogy between dreams and ancient mnemotechniques is tempting because they share several phenomenological characteristics, this analogy is superficial at a closer look. Unlike mneomotechnically encoded material, rapid eye movement (REM) dreams are inherently difficult to remember, do not usually allow conscious subsequent retrieval of all interconnected elements, and have been found to support subsequent episodic memory in only rare cases.

  17. Ensayo de fertilización del pasto puntero (Hyparrhenia rufa con un diseño de superficies de respuesta en la zona de Chaparral, Tolima

    Directory of Open Access Journals (Sweden)

    Buritica Martínez Hernando

    1991-12-01

    Full Text Available Se realizó un esayo de fertilización con NPK empleando urea, superfosfato tripley cloruro de potasio como fuentes en pasto puntero (Hyparrhenia rufa en la vereda Espíritu Santo, municipio de Chaparral, Tolima en suelos francos arenosos de laderade baja a mediana fertilidad natural, altura de 1.000 m.s.n.m., temperatura diaria de 25 grados, precipitación promedia anual de 2.500 mms. y una estación seca bien definida entre los meses de junio a septiembre, utilizando el modelo de superficies de respuesta desarrollado por Box y Hunter, ex·puesto por Cochran y Cox y recomendado por Instituto Colombiano Agropecuario. Los modelos de regresión obtenidos, muestran incrementos crecientes en la producción de forraje verde y contenido proteínico para las aplicaciones crecientes de nitrógeno y fósforo, con máximos equivalentes a 41 toneladas/Ha y 3.5% con aplicaciones de 400 y 200 kgs/Ha de úrea y superfosfato triple. En las condiciones de ensayo, se demuestra la conveniencia de la aplicaciónde nitrógeno y fósforo en cantidades comprendidas entre 150 a 200 y 75 a too kilos de úrea y superfosfato triple por hectárea respectivamente.
    A field experiment were conducted in order to know the response of "Puntero" grass (Hyparrhenia rufa to the application of diferent amount of Urea, concentrated superphosphate and muriate of potash, in a sand 108m soil of farm located in Chaparral (Tolima at 1000 above sea level, 250C annual mean temperature, and 2.500mm annual mean precipitation. Box and Hunter's surface response model was usedas advised by the Instituto Agropecuario Colombiano.The regresion analysis shows that increasing applications levels of Nitrogen (urea and Phosphorus (superphosphate increase the amount of green forage and protein conten; highest level of forage 41 ton and protein 3.5% content were obtained using 400 and 200 kg.ha-1 of urea and superphosphate. From this information, the author recomend the use of amounts between 150

  18. Expression of AQP3 gene in chronic atrophic and chronic superficial gastritis patients

    Directory of Open Access Journals (Sweden)

    Shijun Zhang

    2007-12-01

    Full Text Available BACKGROUND: Most studies about aquaporin 3 (AQP3 in the gastrointestinal tract were carried out on both in vivo and in vitro. The role of AQP3-mediated water transport in human gastrointestinal tract is still unclear. Our aim in this study was to explore the expression of AQP3 gene in chronic atrophic gastritis (CAG and chronic superficial gastritis (CSG atients and to determine its possible function in the development of gastritis.
    METHODS: Twenty-two outpatients diagnosed as CSG and 12 outpatients diagnosed as CAG were selected randomly. Ten cases of healthy individuals were selected as normal control group. In all cases, AQP3 gene expression of gastric mucosa was detected by fluorescence quantitative polymerase chain reaction (FQ-PCR.
    RESULTS: The AQP3 gene expression was significantly higher in gastric mucosa of CSG and healthy individuals than that in CAG (P<0.01. However, there was no significant difference in the AQP3 gene expression between helicobacter pylori positive patients and helicobacter pylori negative patients (P>0.05.
    CONCLUSIONS: AQP3 expression might play certain role in the occurrence and development of gastritis.
    KEY WORDS: Aquaporin 3, chronic superficial gastritis, chronic atrophic gastritis.

  19. Protocolo nacional de monitoreo de la calidad de los en cuerpos naturales de agua superficial

    OpenAIRE

    Autoridad Nacional del Agua. Dirección de Gestión de Calidad de los Recursos Hídricos

    2011-01-01

    Estandariza la metodología para el desarrollo del monitoreo de la calidad de los recursos hídricos en los cuerpos naturales de agua superficial, asimismo pretende convertirse en un instrumento de gestión en el desarrollo del Plan Nacional de Vigilancia de la Calidad de Agua en el Perú.

  20. SU-E-T-537: Comparison of Intra-Operative Soft X-Rays to Low Energy Electron Beams for Treatment of Superficial Lesions

    International Nuclear Information System (INIS)

    Chinsky, B; Diak, A; Gros, S; Sethi

    2014-01-01

    Purpose: Superficial soft x-ray applicators have recently been designed for use with existing intra-operative radiotherapy systems. These applicators may be used in treating superficial lesions which are conventionally treated with electron beams. The purpose of this abstract is to compare dose distributions of an intra-operative 50kV x-ray unit with low energy electrons for the treatment of superficial lesions. Methods: Dosimetric parameters for 1 and 3-cm diameter Intrabeam superficial x-ray applicators were measured with EBT3 Gafchromic film in a solid water phantom. Depth dose distributions and profiles (d=2, 5, 10 and 15mm) were obtained by prescribing a dose of 400cGy at 5mm depth below the phantom surface. Corresponding dose profiles for 6-MeV electrons were acquired from a Varian Clinac 21EX at 100 SSD. H and D calibration curves were generated for each modality for 0-800cGy. Results: Dose coverage, penumbra, dose uniformity, surface dose, and dose fall-off were examined. Compared to electrons, Intrabeam lateral dose coverage at 5mm depth was 70% larger with a much sharper (1/4) penumbra. Electron isodose levels bulged with depth, whereas Intrabeam isodose levels exhibited a convex cone shape. The Intrabeam dose profiles demonstrated horns in the dose distribution up to a 5mm depth and an exponential dose fall-off. Relative surface dose was higher for the Intrabeam applicators. Treatment times were comparable for both modalities. Conclusions: The very small penumbra of Intrabeam at shallow depths could be useful in treating superficial lesions adjacent to critical structures. The exponential dose fall-off of Intrabeam makes it appealing in the sparing of structures beyond the lesion. However, for lesions past a depth of 5mm, electrons would be desirable as they penetrate farther and provide skin sparing. Intrabeam may be preferable for sites that are difficult to treat with electrons due to mechanical and physical limitations

  1. Abordagem profunda e abordagem superficial à aprendizagem: diferentes perspectivas do rendimento escolar Deep and surface approach to learning: different perspectives about academic achievement

    Directory of Open Access Journals (Sweden)

    Cristiano Mauro Assis Gomes

    2011-01-01

    Full Text Available O presente estudo investiga a relação entre a abordagem superficial e a abordagem profunda à aprendizagem na explicação do rendimento escolar. Algumas questões são delineadas buscando verificar o papel de cada uma das abordagens na proficiência escolar em séries distintas. Foram analisados dados de 684 estudantes da sexta série do ensino fundamental à terceira série do ensino médio de uma escola particular de Belo Horizonte, Minas Gerais. Foi delineado um modelo para comparação das séries escolares, através da modelagem por equação estrutural. O modelo desenhado apresentou bom grau de ajuste (c²=427,12; gl=182; CFI=0,95; RMSEA=0,04 para a amostra completa e para cada série escolar. Os resultados mostram que há uma participação distinta da abordagem superficial e da abordagem profunda no desempenho escolar nas diferentes séries. São discutidas implicações dos resultados para a teoria das abordagens.This study investigates the relationship between deep and surface approach to learning in explaining academic achievement. Some questions are outlined aiming to verify the role of each approach in student's proficiency in different grades. Data from 684 students from junior high school (6th year to high school (12th year of a private school in Belo Horizonte, Minas Gerais, were analyzed. A model was designed to compare the grades through structural equation modeling. The designed model showed a good fit (c² = 427.12; df = 182; CFI = .95, RMSEA = .04 for the full sample and for each grade. The results show that there is a distinct contribution of both approaches in academic achievement in the different grades. Further implications to the learning approach theory will be discussed.

  2. Distribuição espacial do sistema radicular do cafeeiro fertirrigado por gotejamento em Campinas Root distribution of fertirrigated coffee trees in Campinas, State of São Paulo, Brazil

    Directory of Open Access Journals (Sweden)

    Carlos Vinícius Garcia Barreto

    2006-01-01

    Full Text Available Este estudo teve como objetivo avaliar o efeito da fertirrigação por gotejamento, utilizando-se emissores com diferentes espaçamentos (0,50 ou 0,80 m e profundidades de instalação (superficial, 0,10 e 0,20 m, na distribuição espacial do sistema radicular do cafeeiro. Observaram-se no cafeeiro irrigado e adubado de forma convencional diferentes condições de desenvolvimento radicular, variando conforme os tratamentos impostos. Para as plantas irrigadas por tubogotejadores com emissores espaçados a cada 0,50 m, a profundidade radicular efetiva foi menor (média de 0,63 m do que a observada para as plantas irrigadas por emissores posicionados a cada 0,80 m (média de 0,70 m. No manejo nutricional por fertirrigação observou-se menor desigualdade na profundidade radicular efetiva entre os tratamentos, bem como, em um aumento médio de 51,1% de densidade de raízes. Houve tendência de manutenção do volume radicular na região próxima aos emissores, enquanto nos pontos mais distantes do desenvolvimento do bulbo úmido, o crescimento radicular foi de 77%. A irrigação das plantas por tubogotejadores enterrados a 0,10 m de profundidade proporcionou maior desenvolvimento radicular em resposta à fertirrigação.This study aimed to evaluate the effect of the drip fertirrigation system, by using emitters with different arranging of spaces (0.50 or 0.80 m and depths of installation (superficial, 0.10 or 0.20 m on the ground, over the root spatial distribution of coffee tree. The coffee tree conventionally irrigated and fertilized presented different conditions of root development, varying according to the treatment imposed. For plants irrigated by emitters spaced every 0.50 m, the effective root depth was smaller (mean of 0.63 m than that observed for plants irrigated by emitters spaced every 0.80 m (mean of 0.70 m. The fertirrigation nutritional management allowed an uniform effective root depth among the treatments, as well as an increase

  3. Multiple brain abscesses due to Penicillium spp infection Abscessos cerebrais múltiplos causados por infecção por Penicillium spp

    Directory of Open Access Journals (Sweden)

    Danilo Teixeira Noritomi

    2005-06-01

    Full Text Available We present a case of central nervous system (CNS infection by a member of the Penicillium genera in a HIV-negative man in Brazil. The patient was admitted complaining of loss of visual fields and speech disturbances. CT scan revealed multiple brain abscesses. Stereothacic biopsies revealed fungal infection and amphotericin B treatment begun with initial improvement. The patient died few days later as a consequence of massive gastrointestinal bleeding due to ruptured esophageal varices. The necropsy and final microbiologic analyses disclosed infection by Penicillium sp. There are thousands of fungal species of the Penicillium genera. Systemic penicilliosis is caused by the P. marneffei and was formerly a rare disease, but now is one of the most common opportunistic infection of AIDS patients in Southeast Asia. The clinical presentation usually involves the respiratory system and the skin, besides general symptoms like fever and weight loss. Penicillium spp infection caused by species other than P. marneffei normally cause only superficial or allergic disease but rare cases of invasive disease do occur. We report the fourth case of Penicillium spp CNS infection.Apresentamos um caso de infecção do sistema nervoso central (SNC por Penicillium spp em paciente do sexo masculino, HIV-negativo no Brasil. O paciente apresentou-se ao Serviço de Urgência do Hospital das Clínicas da Faculdade de Medicina da Universidade de São Paulo queixando-se de alteração visual e dificuldade na fala. Exames de neuroimagem mostraram lesões múltiplas, compatíveis com abscessos. A biópsia esterotáxica revelou infecção fúngica, iniciando-se o tratamento com anfotericina B com sucesso inicial. O paciente morreu poucos dias depois, vítima de uma hemorragia digestiva maciça devido a varizes de esôfago. A necropsia e a análise microbiológica final da biópsia cerebral revelaram infecção por Penicillium spp. Exixtem centenas de espécies de fungos do g

  4. Reduced vaginal elasticity, reduced lubrication, and deep and superficial dyspareunia in irradiated gynecological cancer survivors.

    Science.gov (United States)

    Stinesen Kollberg, Karin; Waldenström, Ann-Charlotte; Bergmark, Karin; Dunberger, Gail; Rossander, Anna; Wilderäng, Ulrica; Åvall-Lundqvist, Elisabeth; Steineck, Gunnar

    2015-05-01

    The purpose of this study was to examine whether or not vaginal elasticity or lack of lubrication is associated with deep or superficial dyspareunia. We investigated gynecological cancer survivors treated with radiation therapy. In a population-based study with 616 women answering a questionnaire (participation rate 78%) and who were treated with radiotherapy for gynecological cancer, we analyzed information from 243 women (39%) who reported that they had had intercourse during the previous six months. Analyses included log-binomial regression (relative risks) and multiple imputations by chained equations in combination with Bayesian Model Averaging, yielding a posterior probability value. Age range of this cancer recurrent-free group of women was 29-80. Dyspareunia affected 164 of 243 of the women (67%). One hundred thirty-four women (55%) reported superficial pain, 97 women (40%) reported deep pain, and 87 women (36%) reported both types of dyspareunia. The relative risk (RR) of deep dyspareunia was 1.87 (CI 1.41-2.49) with impaired vaginal elasticity compared to normal vaginal elasticity. Age and lower abdominal swelling were separate risk factors for deep dyspareunia. However, effects remain after adjusting for these factors. The relative risk of deep dyspareunia was almost twice as high with impaired vaginal elasticity compared to normal vaginal elasticity. If we wish to treat or even prevent deep dyspareunia in women with gynecological cancer, we may use our knowledge of the pathophysiology of deep dyspareunia and increasingly provide dilators together with instructions on how to use them for stretching exercises in order to retain vaginal elasticity. Results highlight the need for studies with more precise questions distinguishing superficial from deep dyspareunia so that in the future we may be able to primarily try to avoid reduced vaginal elasticity and secondarily reduce the symptoms.

  5. Colloidal silver-based nanogel as nonocclusive dressing for multiple superficial pellet wounds

    Directory of Open Access Journals (Sweden)

    Ganesh Singh Dharmshaktu

    2016-01-01

    Full Text Available A good dressing is mandatory to an uncomplicated wound healing, especially when foreign particles contaminate the wound. Various forms of dressing preparations are available for use and differ in chemical composition and efficacy. Silver has been a known agent with good antimicrobial and healing properties and recent times has seen an upsurge in various silver-based dressing supplements. We describe our report of use and efficacy of a silver nanoparticle- based gel dressing in the healing of multiple superficial firearm pellet wounds.

  6. Patient Perception of Imiquimod Treatment for Actinic Keratosis and Superficial Basal Cell Carcinoma in 202 Patients

    NARCIS (Netherlands)

    Waalboer-Spuij, Rick; Holterhues, Cynthia; van Hattem, Simone; Schuttelaar, Marie Louise A.; Gaastra, Menno T. W.; Kuijpers, Danielle I. M.; Hollestein, Loes M.; Nijsten, Tamar E. C.

    2015-01-01

    Objective: To document the impact on patient-reported outcomes and health-related quality of life (HRQoL) of treatment with imiquimod cream in patients with actinic keratosis (AK) and superficial basal cell carcinoma (sBCC). Methods: This open-label, multicenter study included AK and sBCC patients

  7. Capability verification of the beam delivery system in the superficially-placed tumor therapy terminal at HIRFL

    International Nuclear Information System (INIS)

    Dai Zhongying; Li Qiang; Xiao Guoqing; Jin Xiaodong; Yan Zheng; Chinese Academy of Sciences, Beijing

    2007-01-01

    The passive beam delivery system in the superficially-placed tumor therapy terminal at Heavy Ion Research Facility in Lanzhou (HIRFL), which includes two orthogonal dipole magnets as scanning system, a motor-driven energy degrader as range-shifter, series of ridge filters as range modulator and a multileaf collimator, is introduced in detail. The capacities of its important components and the whole system have been verified experimentally. The tests of the ridge filter for extending Bragg peak and the range shifter for energy adjustment show both work well. To examine the passive beam delivery system, a beam shaping experiment were carried out, simulating a three-dimensional (3D) conformal irradiation to a tumor. The encouraging experimental result confirms that 3D layer-stacking conformal irradiation can be performed by means of the passive system. The validation of the beam delivery system establishes a substantial basis for upcoming clinical trial for superficially-placed tumors with heavy ions in the therapy terminal at HIRFL. (authors)

  8. LIBS, Raman spectroscopy, and optical microscopy analyses of superficial encrustations on ancient tesserae in Lebanon

    Science.gov (United States)

    Tomkowska, Anna; Chmielewski, Krzysztof; Skrzyczanowski, Wojciech; Mularczyk-Oliwa, Monika; Ostrowski, Roman; Strzelec, Marek

    2017-07-01

    The aim of research was determination of composition and nature of superficial deposits, cumulated at the selected mosaic's tesserae from Lebanon. Selected were three series of objects from different locations, namely from the seaside and mountain archaeological sites as well as from the mosaics exposed in the city center. Analyzed were stone and ceramic tesserae. The selection of objects was dictated by wide diversification of factors influencing the state of preservation and composition of deposits in given location. Investigations were performed including LIBS, FT-IR, Raman spectroscopy and optical 3D microscopy. The experimental results included composition and kind of deposit at the tesserae surfaces, and composition of tesserae itself. Compounds in the superficial deposits were identified. Confirmed was occurrence of different encrustations in dependence on geographic localization of a given sample. The interpretation of results was supported by multivariate statistical techniques, especially by the factor analysis. Performed analyses constitute the pioneer realization in terms of determination of deposits composition at the surface of mosaics from the Lebanon territory.

  9. Does ultrasound contrast agent improve the diagnostic value of colour and power Doppler sonography in superficial lymph node enlargement?

    International Nuclear Information System (INIS)

    Schulte-Altedorneburg, Gernot; Demharter, Johannes; Linne, Renate; Droste, Dirk W.; Bohndorf, Klaus; Buecklein, Wolfgang

    2003-01-01

    Objective: to analyse whether ultrasound contrast agent (UCA) improves the diagnostic accuracy to differentiate between benign and malignant superficial lymph node enlargement by using colour-coded duplex sonography (CCDS) and power Doppler (PD). Methods: 32 patients with suspected malignant superficial lymph node enlargement prospectively underwent standardised ultrasound examinations using B-mode sonography and native and contrast-enhanced CCDS and PD immediately before biopsy. Solbiati-Index (longitudinal-transverse diameter ratio) and intranodal flow patterns by using different vascularisation types were assessed. Histological and sonographical findings were correlated. Results: 27 malignant and 5 benign lymph nodes were found. Solbiati-Index was lower in malignant lymph nodes than in benign nodes (mean 1.5 vs. 2.4, P<0.045). More intranodal flow patterns could be detected after UCA (53 vs. 43) but the number of correctly identified malignant nodes decreased after UCA (26 vs. 24) and the number of correctly identified benign nodes remained constant compared with native CCDS and PD. In 31% of the colour-mode studies, PD was considered to visualise more clearly intranodal vascular flow patterns than CCDS. Conclusion: despite depicting more intranodal vascular patterns, the use of an ultrasound contrast agent seems not to improve the diagnostic value of CCDS and PD compared with native colour-mode studies in superficial lymph node enlargement

  10. Limpieza del vidrio por erosión iónica, previa a la deposición del recubrimiento decorativo

    Directory of Open Access Journals (Sweden)

    Vershinin, N.

    2000-10-01

    Full Text Available Sputter cleaning is the most reliable way for the pre-treatment of substrates before the deposition of coatings with the aid of magnetron sputtering or vacuum arc deposition. In this work, a large-aperture Hall current accelerator was developed for the sputter cleaning of large-area glasses, metals and plastics sheets. The main advantage of the Hall current accelerator is the possibility to use reactive gases. The Hall accelerator developed is able to work with argon, oxygen, nitrogen and carbon dioxide. The accelerator has the form of a very elongated loop with a large aperture (1400 mm in the vertical direction. The maximum power of the Hall current accelerator is 10 kW. The current-voltage characteristic measured for argon is presented. It allows one to optimise the regime of sputter cleaning by finding the maximum power value at a stable discharge.

    La erosión iónica es el método más eficaz para la eliminación de la capa superficial de los substratos en su fase de preparación para la deposición de recubrimientos en vacío. En el presente trabajo se describe la construcción y características de un acelerador Hall de la corriente eléctrica de abertura larga, diseñado para la limpieza, mediante erosión iónica, de superficies de substratos de vidrio, metal y plástico en forma de láminas con área extensa. Una de las ventajas del acelerador Hall es la posibilidad de uso de gases reactivos. El acelerador aquí descrito es capaz de trabajar con argón, oxígeno, nitrógeno y dióxido de carbono. Este acelerador tiene una forma de bucle muy alargado y, por tanto, dispone de una abertura larga (1400 mm en vertical. La potencia máxima del acelerador es de 10 kW. Se presenta la característica corriente-tensión del acelerador en atmósfera de argón que permite optimizar el régimen de limpieza por erosión, encontrando el máximo de potencia para la descarga estable.

  11. Zonación de peligros por procesos gravitacionales en el flanco suroccidental del volcán Pico de Orizaba, México.

    Directory of Open Access Journals (Sweden)

    Gabriel Legorreta Paulín

    2013-09-01

    Full Text Available Resumen. La cuenca del río Chiquito-Barranca del Muerto, de 111 km2 de superficie, ubicada en el flanco suroccidental del volcán Pico de Orizaba (5675 msnm, se estudió utilizando fotografías aéreas de diversos años y trabajo de campo, con una adaptación del Protocolo de zonificación del peligro de remoción en masa del Departamento de Recursos Naturales, del Estado de Washington, EUA. Se reconocieron 571 procesos gravitacionales de seis tipos: superficial, de escombros-avalancha y profundo, flujos de escombros y de tierra, y caída de rocas. Se definieron doce formas principales del relieve en las que ocurren procesos gravitacionales: barrancos, cabeceras, escarpes de cabeceras de deslizamiento profundo, meandros, planicies, además de tres tipos de laderas clasificadas por su gradiente (véase Tabla 2: bajo, moderado y alto, caída de rocas, barrancas no reguladas, cabeceras no reguladas y laderas convergentes no reguladas. Los procesos gravitacionales potenciales se clasifican en tres rangos de peligro: bajo, alto y muy alto. Los procesos gravitacionales se presentan principalmente en laderas con gradiente moderado, en barrancas no reguladas, en barrancas y en laderas con gradiente bajo. Mientras que el rango de estabilidad es bajo en planicies y en laderas de gradiente menor, es alto en las laderas de gradiente moderado y mayor, en las ocho restantes es muy alto.

  12. Kinetic performance comparison of fully and superficially porous particles with a particle size of 5 µm: intrinsic evaluation and application to the impurity analysis of griseofulvin.

    Science.gov (United States)

    Kahsay, Getu; Broeckhoven, Ken; Adams, Erwin; Desmet, Gert; Cabooter, Deirdre

    2014-05-01

    After the great commercial success of sub-3 µm superficially porous particles, vendors are now also starting to commercialize 5 µm superficially porous particles, as an alternative to their fully porous counterparts which are routinely used in pharmaceutical analysis. In this study, the performance of 5 µm superficially porous particles was compared to that of fully porous 5 µm particles in terms of efficiency, separation performance and loadability on a conventional HPLC instrument. Van Deemter and kinetic plots were first used to evaluate the efficiency and performance of both particle types using alkylphenones as a test mixture. The van Deemter and kinetic plots showed that the superficially porous particles provide a superior kinetic performance compared to the fully porous particles over the entire relevant range of separation conditions, when both support types were evaluated at the same operating pressure. The same observations were made both for isocratic and gradient analysis. The superior performance was further demonstrated for the separation of a pharmaceutical compound (griseofulvin) and its impurities, where a gain in analysis time of around 2 could be obtained using the superficially porous particles. Finally, both particle types were evaluated in terms of loadability by plotting the resolution of the active pharmaceutical ingredient and its closest impurity as a function of the signal-to-noise ratio obtained for the smallest impurity. It was demonstrated that the superficially porous particles show better separation performance for griseofulvin and its impurities without significantly compromising sensitivity due to loadability issues in comparison with their fully porous counterparts. Moreover these columns can be used on conventional equipment without modifications to obtain a significant improvement in analysis time. Copyright © 2014 Elsevier B.V. All rights reserved.

  13. Superficial parotidectomy versus retrograde partial superficial parotidectomy in treating benign salivary gland tumor (pleomorphic adenoma).

    Science.gov (United States)

    Emodi, Omri; El-Naaj, Imad Abu; Gordin, Arye; Akrish, Sharon; Peled, Micha

    2010-09-01

    Of all benign salivary gland tumors of the parotid gland, pleomorphic adenoma (mixed tumor) is the most common. It accounts for 60% to 70% of all benign tumors of the parotid gland. This neoplasm arises in patients in the fourth to sixth decade of life, with a female predominance. The surgical excision of this lesion continues to be the subject of major debate. The goal is to avoid facial disability yet attain complete resection without perforation of the capsule/pseudocapsule. The purpose of our study is to compare 2 surgical techniques performed at the Ear, Nose, and Throat and Maxillofacial Departments, Rambam Medical Center, Haifa, Israel, and determine which is preferable in treating this lesion. We reviewed 48 patients who underwent excision of pleomorphic adenoma of the parotid gland between 1996 and 2005 at Rambam Medical Center: 18 were treated surgically with the classical superficial parotidectomy (SP) technique, using an anterograde approach, and 30 were treated with retrograde partial superficial parotidectomy (PSP). We compared the 2 surgical techniques in terms of surgical time, histopathologic size of the lesion, amount of excised healthy parotid tissue, histologic margin, and the preservation of the capsule/pseudocapsule. We also made clinical records of temporary or definitive injury to the facial nerve, which branches of the facial nerve were temporarily or definitively injured, the occurrence of Frey syndrome, esthetic satisfaction, and the amount of recurrence or infection after surgery. Of the 48 patients, 19 (39.6%) were male and 29 (60.4%) were female, with a mean age (+/- SD) of 43.8 +/- 16.97 years (median, 50 years; range, 12-79 years). We found a significant difference (P = .029) in mean surgical time (+/- SD): 171 +/- 49.7 minutes (median, 165 minutes) when performing the classical SP and 145 +/- 42.7 minutes (median, 130 minutes) when performing the retrograde PSP. Much more healthy parotid tissue was taken out with the classical

  14. Superficial vessel reconstruction with a multiview camera system

    Science.gov (United States)

    Marreiros, Filipe M. M.; Rossitti, Sandro; Karlsson, Per M.; Wang, Chunliang; Gustafsson, Torbjörn; Carleberg, Per; Smedby, Örjan

    2016-01-01

    Abstract. We aim at reconstructing superficial vessels of the brain. Ultimately, they will serve to guide the deformation methods to compensate for the brain shift. A pipeline for three-dimensional (3-D) vessel reconstruction using three mono-complementary metal-oxide semiconductor cameras has been developed. Vessel centerlines are manually selected in the images. Using the properties of the Hessian matrix, the centerline points are assigned direction information. For correspondence matching, a combination of methods was used. The process starts with epipolar and spatial coherence constraints (geometrical constraints), followed by relaxation labeling and an iterative filtering where the 3-D points are compared to surfaces obtained using the thin-plate spline with decreasing relaxation parameter. Finally, the points are shifted to their local centroid position. Evaluation in virtual, phantom, and experimental images, including intraoperative data from patient experiments, shows that, with appropriate camera positions, the error estimates (root-mean square error and mean error) are ∼1  mm. PMID:26759814

  15. Peripapillary Retinal Nerve Fiber Layer Thickness Corresponds to Drusen Location and Extent of Visual Field Defects in Superficial and Buried Optic Disc Drusen

    DEFF Research Database (Denmark)

    Malmqvist, Lasse; Wegener, Marianne; Sander, Birgit A

    2016-01-01

    (P = 0.002) than eyes with buried ODD. There was a correlation between mean peripapillary RNFL thinning and visual field defects as measured by perimetric mean deviation (R-0.66; P = 0.0001). The most frequent visual field abnormalities were arcuate and partial arcuate defects. CONCLUSIONS...... of patients with ODD and to compare the peripapillary RNFL thickness to the extent of visual field defects and anatomic location (superficial or buried) of ODD. METHODS: Retrospective, cross sectional study. RESULTS: A total of 149 eyes of 84 ODD patients were evaluated. Sixty-five percent were female and 76......% had bilateral ODD. Of 149 eyes, 109 had superficial ODD and 40 had buried ODD. Peripapillary RNFL thinning was seen in 83.6% of eyes, where optical coherence tomography was performed (n = 61). Eyes with superficial ODD had greater mean peripapillary RNFL thinning (P ≤ 0.0001) and visual field defects...

  16. INCREASED URINARY ALBUMIN INDICATING UROTHELIAL LEAKAGE FOLLOWING INTRAVESICAL BACILLUS-CALMETTE-GUERIN THERAPY FOR SUPERFICIAL BLADDER-CANCER

    NARCIS (Netherlands)

    de Boer, E. C.; de Reijke, T. M.; Schamhart, D. H.; Vos, P. C.; Kurth, K. H.

    1993-01-01

    This study on the increase in albumin in the urine of patients with superficial bladder cancer after intravesical bacillus Calmette-Guerin (BCG) treatment was initiated on the basis of two facts. First, extravasation of serum albumin could be expected as a result of the BCG-induced delayed-type

  17. DESAJUSTE EDUCATIVO POR REGIONES EN COLOMBIA: ¿COMPETENCIA POR SALARIOS O POR PUESTOS DE TRABAJO?

    Directory of Open Access Journals (Sweden)

    Maribel Castillo Caicedo

    2007-06-01

    Full Text Available Este trabajo aporta una perspectiva del fenómeno de la sobreeducación, entendida como un desajuste por exceso, entre el nivel educativo alcanzado por el individuo y el exigido por el puesto de trabajo en el cual se desempeña; esto se debe a que existe una demanda laboral estrecha de puestos de trabajo para personas calificadas en Colombia. Se analizan las contribuciones empíricas existentes y el debate sobre las mismas; se examinan las teorías que permiten explicar la existencia de un desajuste educativo y se realiza una revisión de la literatura internacional y nacional sobre el tema. Adicionalmente, se plantean una serie de hipótesis para desarrollar un esquema que permita determinar el comportamiento del individuo en el fenómeno de la sobreeducación.

  18. Uso de fluidos dieléctricos a base de aceites en maquinado por descargas eléctricas por penetración/Case Study for the use of Vegetable Dielectric Fluid in Die-Sink Electro Discharge Machining (EDM.

    Directory of Open Access Journals (Sweden)

    Mauro Suarez Paipa

    2012-12-01

    Full Text Available En procesos de mecanizado por descarca eléctrica EDM (Electro Dischage Machining el fluido dieléctrico normalmente está compuesto por derivados del petróleo. El objetivo de este trabajo es evaluar fluidos alternativos a los tradicionales. En este contexto, fueron analizados 5 fluidos dieléctricos de origen vegetal, comparándolos con el desempeño de kerosene y aceite mineral. El material mecanizado fue acero rápido M2, usando parámetros de desbaste para electrodos de cobre y grafito. Fueron medidas las tasas de remoción de material (TMR, el desgaste de los electrodos, la rugosidad y la morfología de la superficie mecanizada. Los dieléctricos de origen vegetal presentaron un desempeño competitivo usando electrodos de cobre y grafito.EDM process commoly use petroleum based died fluids.The aim of this work is to evaluate alternative fluidsto traditional mineral ones. It was analyzed 5 different dielectric fluids derived of seeds. They were comparedwith kerosene and a mineral oil. The workpiece was speed-steel M2. The machining parameters were preestablished for working with copper and graphite electrodes. The material removal rate, the wear rate ofthe electrodes, the finishing and morphology of machined surface were all measured. Vegetable based oils showed a competitive performance using cooper and graphite electrodes when compared with mineral based oils.

  19. Efecto del tratamiento mecánico por molienda en las propiedades texturales de pirofilita

    Directory of Open Access Journals (Sweden)

    Sánchez Soto, P. J.

    2009-04-01

    texturales de pirofilita. Las isotermas de adsorción-desorción de gas nitrógeno a -195 ºC, determinadas en el material original y modificado por molienda, no han mostrado fenómenos de histéresis pronunciados. Se ha encontrado que los volúmenes de gas adsorbidos aumentan de forma gradual al incrementarse el tiempo de molienda, presentando un máximo a los 30 minutos. A partir de este tiempo de tratamiento, aquéllos disminuyen hasta llegar a una situación muy similar a la inicial. La evolución de los valores de superficie específica (SBET, determinados mediante aplicación de la ecuación BET, ha permitido apreciar un rápido incremento al aumentar el tiempo de molienda desde 2 m2xg-1 en la muestra original hasta un máximo de 60 m2xg-1 a los 30 minutos, llegando a un valor de 7.5 m2xg-1 a los 325 minutos. Este comportamiento se atribuyó a una disminución del tamaño de las partículas del silicato laminar por efecto de la molienda hasta un límite. Por encima de este límite, las partículas comienzan a reagregarse y aglomerarse mediante un proceso mecanoquímico de soldadura en frío, originado por una alta reactividad superficial y, en consecuencia, disminuyen progresivamente los valores de SBET lo que coincide con el mayor grado de alteración estructural que se produce en el material y la amorfización consiguiente. Asimismo, del estudio textural realizado se ha mostrado la ausencia de microporos en el proceso de fisisorción del gas nitrógeno por los materiales modificados debido al efecto de la molienda, deduciéndose que dicho proceso se produce en multicapas. Una estimación de la distribución de tamaño de los poros formados con el tratamiento de molienda ha indicado una contribución de los tamaños comprendidos entre 20 y 50 Å al aumento de SBET. Por encima de 30 minutos de molienda esta contribución disminuye progresivamente al producirse el proceso

  20. Vertebrados terrestres registrados mediante foto-trampeo en arroyos estacionales y cañadas con agua superficial en un hábitat semiárido de Baja California Sur, México Terrestrial vertebrates recorded by camera traps in areas with seasonal streams and creeks of superficial waters in a semiarid habitat of Baja California Sur, Mexico

    Directory of Open Access Journals (Sweden)

    Erika Mesa-Zavala

    2012-03-01

    Full Text Available Los cuerpos de agua superficial (CAS permanentes o efímeros (pozas, tinajas, escurrimientos, etc. que se encuentran en depresiones del terreno, como arroyos y cañadas, son soporte fundamental para el ecosistema en zonas áridas. Mediante el uso de cámaras-trampa, en este estudio se identifican especies de vertebrados terrestres silvestres presentes en 4 sitios con agua superficial, en el extremo sur de la sierra El Mechudo, Baja California Sur, y se analiza el uso de los CAS por las especies en los periodos de actividad. En cada sitio se caracterizó el hábitat (topografía, vegetación y agua. Los 4 sitios mostraron diferencias en sus características ambientales. Se identificaron 41 especies de vertebrados terrestres (3 reptiles, 31 aves y 7 mamíferos. Se encontraron también varias especies de murciélagos que no fueron identificadas. La riqueza de especies y frecuencia de visita fue diferente en cada sitio. Con excepción de 3 especies de mamíferos, el horario de actividad fue similar en los 4 sitios. La presente investigación aporta información sobre la importancia de los CAS en zonas semiáridas, describiendo el hábitat, las especies y su comportamiento, elementos básicos para la conservación y manejo de los recursos naturales.Permanent or ephemeral water ponds (puddles, catchments, drains, and so on located on ground depressions, such as streams and creeks, are a fundamental support for ecosystems in dry areas. This study identified the species of native terrestrial vertebrates in 4 sites in the southernmost part of the Sierra El Mechudo, B.C.S., including how such species use these bodies of water based on the periods of species activity. Habitats were characterized in 4 sites (topography, vegetation, and water sources; camera-traps were placed around water ponds from March to October 2007. The 4 sites differed in their environmental characteristics. Overall, there were 41 species of terrestrial vertebrates (3 reptiles, 31

  1. Noninvasive in vivo optical characterization of blood flow and oxygen consumption in the superficial plexus of skin

    Science.gov (United States)

    Liasi, Faezeh Talebi; Samatham, Ravikant; Jacques, Steven L.

    2017-11-01

    Assessing the metabolic activity of a tissue, whether normal, damaged, aged, or pathologic, is useful for diagnosis and evaluating the effects of drugs. This report describes a handheld optical fiber probe that contacts the skin, applies pressure to blanch the superficial vascular plexus of the skin, then releases the pressure to allow refill of the plexus. The optical probe uses white light spectroscopy to record the time dynamics of blanching and refilling. The magnitude and dynamics of changes in blood content and hemoglobin oxygen saturation yield an estimate of the oxygen consumption rate (OCR) in units of attomoles per cell per second. The average value of OCR on nine forearm sites on five subjects was 10±5 (amol/cell/s). This low-cost, portable, rapid, noninvasive optical probe can characterize the OCR of a skin site to assess the metabolic activity of the epidermis or a superficial lesion.

  2. Evaluación de MDE para la estimación de volúmenes por procesos de erosión aplicando análisis de autocorrelación espacial en una cuenca de los andes venezolanos. Caso de estudio: microcuenca torrencial La Machirí

    Directory of Open Access Journals (Sweden)

    Cristopher Camargo Roa

    2014-06-01

    Full Text Available Los modelos digitales de elevación (MDE, como representación visual de las formas del relieve y de los valores de altura, han sido muy útiles para estudiar los aspectos relacionados con la topografía de un área. Esta investigación se realizó en un área de 3.39 km2 de la microcuenca torrencial La Machirí (estado Táchira, Venezuela. Tuvo por objetivo evaluar un MDE obtenido por un proceso de fotogrametría digital cotejado a su vez con un MDE elaborado a partir de la edición de curvas de nivel existentes en cartas topográficas. Para ello se aplicaron métodos como el análisis exploratorio de datos espaciales (ESDA y la geoestadística de puntos (análisis de mínima distancia, análisis de patrones espaciales, variograma y superficie variográfica. Se pudo determinar una diferencia existente entre ambos modelos, resultado de la sumatoria de los errores generados, en primer lugar, por la distribución espacial de los puntos de control señalados para el proceso fotogramétrico (número de puntos menores al valor de una distribución normal, posible sesgo espacial entre los puntos y manifestación de fenómenos de dependencia espacial, seguido del error generado a partir del método de interpolación aplicado durante el mismo y el error resultante originado por el comportamiento local de los procesos de erosión en el área. La primera valoración arrojó una diferencia en la superficie de área de 0.57 ha y en volumen de 9.41 hm3 en ambos MDE. Un análisis sectorizado permitió determinar la falta de al menos 3 puntos de control para obtener un MDE más satisfactorio.

  3. Desajuste educativo por regiones en Colombia: ¿competencia por salarios o por puestos de trabajo?

    Directory of Open Access Journals (Sweden)

    Castillo Caicedo Maribel

    2007-08-01

    Full Text Available Este trabajo aporta una perspectiva del fenómeno de la sobreeducación,
    entendida como un desajuste por exceso, entre el nivel educativo alcanzado
    por el individuo y el exigido por el puesto de trabajo en el cual se
    desempeña; esto se debe a que existe una demanda laboral estrecha de
    puestos de trabajo para personas calificadas en Colombia. Se analizan las
    contribuciones empíricas existentes y el debate sobre las mismas; se
    examinan las teorías que permiten explicar la existencia de un desajuste
    educativo y se realiza una revisión de la literatura internacional y
    nacional sobre el tema. Adicionalmente, se plantean una serie de hipótesis
    para desarrollar un esquema que permita determinar el comportamiento
    del individuo en el fenómeno de la sobreeducación.

  4. Endoscopic mucosal resection for proximal superficial lesions: efficacy and safety study in 59 consecutive resections Resección endoscópica mucosa de lesiones superficiales altas: estudio de su eficacia y seguridad en 59 resecciones consecutivas

    Directory of Open Access Journals (Sweden)

    Eduardo Albéniz-Arbizu

    2012-09-01

    Full Text Available Introduction: endoscopic mucosal resection is an accepted technique for the treatment of proximal gastrointestinal tract superficial lesions. Objectives: to evaluate the efficacy and safety of this procedure in the proximal gastrointestinal tract. Material and methods: forty one consecutive patients (23 males and 18 females, mean age of 61 ± 11.5 years were included in our study. Fifty nine resections were performed in these patients in 69 sessions. Lesions treated consisted of elevated lesions with high grade dysplasia in the context of Barrett's esophagus (group A, high grade dysplasia appearing in random biopsies taken during the follow-up of Barrett's esophagus (group B and superficial gastroduodenal lesions (group C. Snare resection after submucosal injection, band ligator-assisted or cap-assisted mucosal resection were the chosen techniques. Results: we resected 7 elevated lesions with high grade dysplasia in the context of Barrett's esophagus, 6 complete Barrett's esophagus with high grade dysplasia in 16 sequential sessions and 46 gastroduodenal superficial lesions (10 adenomas, 9 gastric superficial carcinomas, 18 carcinoid tumours and 9 lesions of different histological nature. Resections in the two first groups were complete in 100% of the cases, and in 97.9% of the cases in group C. Complications included 2 cases of limited deferred bleeding (groups A and B and another two cases of stenosis with little clinical relevance in Group B. Conclusions: a endoscopic mucosal resection is an efficient technique for the treatment of proximal gastrointestinal tract superficial lesions; b it is a safe procedure with a low percentage of complications, which can generally be managed endoscopically; and c in contrast with other ablative techniques, endoscopic mucosal resection offers the possibility of a pathologic analysis of the samples.Introducción: la resección endoscópica mucosa es una técnica aceptada en el tratamiento de lesiones

  5. Case report: partial relapse of Bell's palsy following superficial radiotherapy to a basal cell carcinoma in the temple

    International Nuclear Information System (INIS)

    Brincat, Stephen; Mantell, B.S.

    1986-01-01

    A patient who developed a partial relapse of Bell's palsy following superficial radiotherapy to a basal cell carcinoma in the temple is reported. Nerves injured by Bell's palsy may be more susceptible to radiation induced damage. (author)

  6. Candidate biomarker discovery and selection for ‘Granny Smith' superficial scald risk management and diagnosis, poster board

    Science.gov (United States)

    Discovery of candidate biomarkers for superficial scald, a peel disorder that develops during storage of susceptible apple cultivars, is part of a larger project aimed at developing biomarker-based risk-management and diagnostic tools for multiple apple postharvest disorders (http://www.tfrec.wsu.ed...

  7. The cross-sectional area of the superficial digital flexor tendon of trained and untrained Thoroughbred racehorses Área transversal do tendão flexor digital superficial de cavalos Puro Sangue Inglês de corrida em treinamento e sem treinamento

    Directory of Open Access Journals (Sweden)

    Ana Guiomar Matos Santiago Reis

    2010-08-01

    Full Text Available Twenty Thoroughbred racehorses were ultrasonographically evaluated to determine the relation between normal values of the cross-sectional area (CSA of the right and left forelimbs superficial digital flexor tendons (SDFT in the metacarpal region for trained and untrained Thoroughbreds racehorses. Ultrasonography revealed that CSA at 26cm distal to the accessory carpal bone is larger than other proximal levels, for either left or right forelimbs. In addition, the CSA at 2, 4, 6, 8, 10, 12 and 14cm distal to the accessory carpal bone of the left forelimb are larger (P0.05 between left and right forelimb for CSA of the SDFT, at any level, for either trained or untrained horses, and there was no significant difference between untrained or trained horses for the CSA of right forelimb. In conclusion, the CSA of the left forelimb SDFT for horses that had been in continuous race training remains larger when they were trained anticlockwise, contrary to horses that had not been training for more than one year.Vinte cavalos da raça Puro Sangue Inglês de corrida foram submetidos a exame ultrassonográfico, com o intuito de determinar a relação entre os valores normais da área do tendão flexor digital superficial (TFDS na região metacarpiana dos membros torácicos direito e esquerdo, em cavalos com e sem treinamento. O exame ultrassonográfico revelou que a área do tendão 26cm distal ao osso acessório do carpo é maior em comparação com as alturas proximais, tanto nos membros torácicos esquerdos, como nos membros torácicos direitos. Além disso, a área do TFDS nas alturas 2, 4, 6, 8, 10, 12 e 14cm, no membro torácico esquerdo, é maior (P0,05 nas áreas do TFDS entre os membros torácicos direito e esquerdo, tanto para os animais em treinamento, como para os animais sem treinamento. Também não foi encontrada diferença significativa em comparação com o membro direito dos cavalos em treinamento e sem treinamento. Conclui-se que os cavalos

  8. Structural Insights into the PorK and PorN Components of the Porphyromonas gingivalis Type IX Secretion System.

    Directory of Open Access Journals (Sweden)

    Dhana G Gorasia

    2016-08-01

    Full Text Available The type IX secretion system (T9SS has been recently discovered and is specific to Bacteroidetes species. Porphyromonas gingivalis, a keystone pathogen for periodontitis, utilizes the T9SS to transport many proteins including the gingipain virulence factors across the outer membrane and attach them to the cell surface via a sortase-like mechanism. At least 11 proteins have been identified as components of the T9SS including PorK, PorL, PorM, PorN and PorP, however the precise roles of most of these proteins have not been elucidated and the structural organization of these components is unknown. In this study, we purified PorK and PorN complexes from P. gingivalis and using electron microscopy we have shown that PorN and the PorK lipoprotein interact to form a 50 nm diameter ring-shaped structure containing approximately 32-36 subunits of each protein. The formation of these rings was dependent on both PorK and PorN, but was independent of PorL, PorM and PorP. PorL and PorM were found to form a separate stable complex. PorK and PorN were protected from proteinase K cleavage when present in undisrupted cells, but were rapidly degraded when the cells were lysed, which together with bioinformatic analyses suggests that these proteins are exposed in the periplasm and anchored to the outer membrane via the PorK lipid. Chemical cross-linking and mass spectrometry analyses confirmed the interaction between PorK and PorN and further revealed that they interact with the PG0189 outer membrane protein. Furthermore, we established that PorN was required for the stable expression of PorK, PorL and PorM. Collectively, these results suggest that the ring-shaped PorK/N complex may form part of the secretion channel of the T9SS. This is the first report showing the structural organization of any T9SS component.

  9. Structural Insights into the PorK and PorN Components of the Porphyromonas gingivalis Type IX Secretion System.

    Science.gov (United States)

    Gorasia, Dhana G; Veith, Paul D; Hanssen, Eric G; Glew, Michelle D; Sato, Keiko; Yukitake, Hideharu; Nakayama, Koji; Reynolds, Eric C

    2016-08-01

    The type IX secretion system (T9SS) has been recently discovered and is specific to Bacteroidetes species. Porphyromonas gingivalis, a keystone pathogen for periodontitis, utilizes the T9SS to transport many proteins including the gingipain virulence factors across the outer membrane and attach them to the cell surface via a sortase-like mechanism. At least 11 proteins have been identified as components of the T9SS including PorK, PorL, PorM, PorN and PorP, however the precise roles of most of these proteins have not been elucidated and the structural organization of these components is unknown. In this study, we purified PorK and PorN complexes from P. gingivalis and using electron microscopy we have shown that PorN and the PorK lipoprotein interact to form a 50 nm diameter ring-shaped structure containing approximately 32-36 subunits of each protein. The formation of these rings was dependent on both PorK and PorN, but was independent of PorL, PorM and PorP. PorL and PorM were found to form a separate stable complex. PorK and PorN were protected from proteinase K cleavage when present in undisrupted cells, but were rapidly degraded when the cells were lysed, which together with bioinformatic analyses suggests that these proteins are exposed in the periplasm and anchored to the outer membrane via the PorK lipid. Chemical cross-linking and mass spectrometry analyses confirmed the interaction between PorK and PorN and further revealed that they interact with the PG0189 outer membrane protein. Furthermore, we established that PorN was required for the stable expression of PorK, PorL and PorM. Collectively, these results suggest that the ring-shaped PorK/N complex may form part of the secretion channel of the T9SS. This is the first report showing the structural organization of any T9SS component.

  10. High-field spin-echo MR imaging of superficial and subependymal siderosis secondary to neonatal intraventricular hemorrhage

    International Nuclear Information System (INIS)

    Gomori, J.M.; Grossman, R.I.; Goldberg, H.I.; Zimmerman, R.A.; Bilaniuk, L.T.

    1987-01-01

    Two cases of superficial siderosis with subependymal siderosis, secondary to neonatal intraventricular hemorrhage, are presented. High-field spin-echo MR imaging (1.5 Tesla) showed marginal hypointensity of the ventricular walls as well as of the subpial regions. These findings were most evident on T 2 weighted images, characteristic of hemosiderotic deposits. (orig.)

  11. Resolidificación con láser de barreras térmicas de circona depositadas por proyección térmica plasma (APS

    Directory of Open Access Journals (Sweden)

    Diez, J. C.

    2004-12-01

    Full Text Available Coatings of partially stabilised zirconia are currently used as thermal barrier coatings in gas turbines and diesel engines. Zirconia coatings are usually processed via plasma spraying a well-established and relatively cheap technique. Thermal barrier coatings consist of 0.5 to 1 mm of porous ceramic bonded to the metallic substrate by a bond-coat. High porosity in the ceramic coating assure a good thermal behaviour but increases the chances for corrosion or chemical attack of the bondcoat and coating detach by delamination processes. The as sprayed surface is rough and sensitive to erosion. In the present work we obtained the processing conditions for laser remelting of Y-PSZ coatings deposited by atmospheric plasma spraying technique on Ni- alloys. A simple model accounts for the onset melting energy and its dependence with the processing speed. The remelted film is dense and with smooth surface and well bonded to the underlying porous coat.

    Los recubrimientos de circona parcialmente estabilizada con itria se usan habitualmente como barreras térmicas en turbinas y motores. Estos recubrimientos se suelen realizar mediante proyección térmica plasma (APS, una técnica relativamente económica y bien conocida en el sector industrial. Las barreras consisten de una capa de 0.5 a 1 mm de cerámica muy porosa unida a la aleación metálica mediante una capa de enlace. La elevada porosidad permite incrementar la resistencia al choque térmico pero provoca que el oxigeno u otros gases perniciosos para el substrato lleguen con relativa facilidad, produciéndose ataques que pueden acelerar el proceso de delaminación. Asimismo la superficie es rugosa y por tanto expuesta a la erosión por partículas. En este trabajo se presentan las condiciones óptimas que permiten la resolidificación mediante láser de la superficie de las capas de Y-PSZ (circona parcialmente estabilizada con itria depositadas por proyección térmica de plasma en aleaciones

  12. A Dynamic Decision Support System for Farm Water Management in Surface Irrigation: Model Development and Application Un Sistema de Soporte Dinámico de Decisión para la Gestión de Agua Predial en Riego Superficial: Desarrollo y Aplicación del Modelo

    Directory of Open Access Journals (Sweden)

    Carlos I. Flores

    2010-06-01

    Full Text Available An online dynamic decision support system (DDSS was developed, to support the farm water management in surface irrigation. The online DDSS was based on the formulation and integration of three components: a dynamic-relational data base, an administrator model, and a graphical user interface. The DDSS allows routines of actualization, edition and addition of online data, providing information in real time. The online DDSS was applied in an orange orchard (Citrus sinensis L. Osbeck cv. Valencia Late under furrow irrigation. The results pointed out that the time irrigation cutoff was the main significant management factor, to decrease the hazard of leaching, superficial runoff and percolation. Applying the results obtained with the DDSS, furrow irrigation efficiencies could be improved up to values equals to 95.89% for application efficiency and 94.61% for total distribution efficiency. As a conclusion, the DDSS demonstrated to be a useful tool to assist the decision making process, providing proper information for the management of the available water resource at farm level.Se desarrolló un sistema de soporte dinámico de decisión (SSDD en línea, con el objetivo de asistir la gestión del agua predial en riego superficial. El SSDD en línea se basó en la formulación e integración de tres componentes: una base de datos relacional dinámica, un modelo administrador y una interfaz gráfica de usuario. El SSDD permite rutinas de actualización, edición y adición de información en línea, proporcionando información en tiempo real. El SSDD en línea se aplicó en un huerto de naranjos (Citrus sinensis L. Osbeck cv. Valencia Late bajo riego por surcos. Los resultados indicaron que el tiempo de corte es la variable significativa de decisión para disminuir el riesgo de lixiviación, escorrentía superficial y percolación. Aplicando los resultados obtenidos con el SSDD, las eficiencias del riego por surco podrían mejorarse, alcanzando valores

  13. Phosphorus loss by surface runoff in no-till system under mineral and organic fertilization Perda de fósforo via escoamento superficial no sistema plantio direto sob adubação mineral e orgânica

    Directory of Open Access Journals (Sweden)

    Oromar João Bertol

    2010-02-01

    Full Text Available The no-till system has been intensively used in the state of Paraná, Brazil, and it has increased the nutrients level at the soil surface. This has contributed for nutrient losses via runoff and consequently, off-site water pollution. The objective of this study was to evaluate phosphorus loss in surface runoff by simulated rainfall on an Oxisol, under no-till system following application of mineral fertilizer and liquid swine manure. Nitrogen, soil and water losses from the same study are reported in a separated paper. The application of liquid swine manure, compared with mineral fertilization, increased runoff concentration of total P, particulate P and dissolved reactive P by 193%, 111% and 506%, respectively, averaged for all rainfall intensities. Independently on the fertilizer source, the highest rainfall intensity provided the greatest concentration and loads of P in runoff.O sistema plantio direto tem sito intensivamente utilizado no Estado do Paraná Brasil o qual tem aumentado os níveis de nutrientes na superfície do solo. Isto tem contribuído para a perda de nutrientes via escoamento superficial e consequentemente com a poluição não pontual das águas. Avaliou-se a perda de fósforo via escoamento superficial ocasionado por chuva simulada sobre um Latossolo originário de basalto, em sistema plantio direto submetido à aplicação de fertilizante mineral e dejeto líquido de suíno. As perdas de nitrogênio, solo e água deste mesmo estudo foram publicadas em outro artigo. A aplicação de dejeto líquido suíno, comparado com o fertilizante mineral, aumentou a concentração de P total, P particulado e P dissolvido reativo em 193%, 111% e 506%, respectivamente, na média das chuvas. Independentemente da fonte de fertilizante, a chuva de maior intensidade proporcionou maior concentração e quantidade perdida de P no escoamento superficial.

  14. The Effect of Simultaneous Superficial and Proprioceptive Stimulations on Dexterity of Educable 6-7 Years Old Children with Down Syndrome

    Directory of Open Access Journals (Sweden)

    Meisam Mohammadi

    2011-04-01

    Full Text Available Objectives: Down syndrome is the most common chrosomal disorder in which the fine and gross motor skills due to lack of proper sensory experience are disturbed. The role of dexterity in activity of daily living, interaction with environment and independency is quiet crucial in Down syndrome. Therefore, the aim of this study was to investigate the effects of simultaneous application of superficial and proprioceptive stimuli on the dexterity of 6-7 year-old educable children with Down syndrome. Methods: Thirty–three educable children with Down syndrome were assigned in three groups (i.e. superficial, proprioceptive and simultaneous application respectively and voluntarily participated in the study. In the first group, children received only exteroceptive stimulation for 30 minutes, three times a week. Children in the second group received only proprioceptive stimulation in the same way. In the third group, children received both stimulations simultaneously. Dexterity was evaluated through Purdue Pegbourd Test after 5th, 10th, 15th, 20th, 25th, and 30th sessions. Results: Dexterity changes were significantly differed in all three groups (P0.05. Discussion: The findings of current study suggest that simultaneous application of superficial and proprioceptive senses could be used for improvement the dexterity in children with Down syndrome.

  15. The PorX response regulator of the Porphyromonas gingivalis PorXY two-component system does not directly regulate the Type IX secretion genes but binds the PorL subunit.

    Directory of Open Access Journals (Sweden)

    Maxence S Vincent

    2016-08-01

    Full Text Available The Type IX secretion system (T9SS is a versatile multi-protein complex restricted to bacteria of the Bacteriodetes phylum and responsible for the secretion of surface attachment of diverse proteins that participate to S-layer formation, gliding motility or pathogenesis. The T9SS is poorly characterized but a number of proteins involved in the assembly of the secretion apparatus in the oral pathogen Porphyromonas gingivalis have been identified based on genome substractive analyses. Among these proteins, PorY and PorX encode typical two-component system (TCS sensor and CheY-like response regulator respectively. Although the porX and porY genes do not localize at the same genetic locus, it has been proposed that PorXY form a bona fide TCS. Deletion of the porX in P. gingivalis causes a slight decrease of the expression of a number of other T9SS genes, including sov, porT, porP, porK, porL, porM, porN and porY. Here, we show that PorX and the soluble cytoplasmic domain of PorY interact. Using electrophoretic mobility shift, DNA-protein co-purification and heterologous host expression assays, we showed that PorX does not bind and does not directly regulate expression of the T9SS genes. Finally, we show that PorX interacts with the cytoplasmic domain of PorL, a component of the T9SS membrane core complex and propose that the CheY-like PorX protein might be involved in the dynamics of the T9SS.

  16. Current practice in the management of superficial bladder cancer in the Netherlands and Belgian Flanders: a survey.

    NARCIS (Netherlands)

    Witjes, J.A.; Melissen, D.O.; Kiemeney, L.A.L.M.

    2006-01-01

    OBJECTIVE: Because there is no national guideline for the diagnosis, therapy and follow up of (superficial) bladder cancer in the Netherlands and Belgium, the actual patient management may differ between urologists. The purpose of this study is to get insight in the current way urologists diagnose,

  17. Efeito do teor de amido danificado na produção de biscoitos tipo semi-duros Effect of damaged starch in the production of sugar-snap cookie type

    Directory of Open Access Journals (Sweden)

    Luiz Carlos Gutkoski

    2007-03-01

    Full Text Available O trabalho objetivou estudar a danificação do amido de farinha de trigo por moagem e o seu efeito na produção de biscoitos tipo semi-duros. Amostras de trigo dos cultivares BR 23, BRS Angico e Rubi, com características diferentes quanto à dureza foram moídas em moinho de rolos através de uma passagem pelo conjunto de quebra; quebra mais três reduções na umidade 16% e quebra mais três reduções na umidade 12%. Neste tratamento, a moagem foi complementada pelo emprego de moinho de bolas. Nas farinhas, foram realizadas análises físicas, químicas, reológicas e funcionais, utilizando delineamento casualizado em planejamento fatorial completo 3 x 3, totalizando nove tratamentos. Os resultados foram analisados estatisticamente e, nos modelos significativos, as médias comparadas entre si pelo teste de Tukey a 5% de probabilidade de erro. Os resultados rendimento de quebra, proteína bruta, amido danificado, força geral do glúten (W x 10-4J e relação tenacidade/extensibilidade (P/L indicam que a farinha do cultivar BRS Angico apresentou melhores características para a produção de biscoitos seguido de BR 23 e Rubi. O teor de amido danificado produzido durante a moagem dos trigos influencia nas propriedades funcionais dos biscoitos apresentando melhor resultado aqueles obtidos a partir de uma passagem pelo conjunto de quebra.The objective of this research was to study the damage starch of wheat flour which occurred in the milling process and its effect in the production of sugar-snap cookie type. Samples of the wheat by cultivars BR 23, BRS Angico and Rubi, with different hardness were milled in a roller-mill through a passage for the break system; a break and three reductions in the 16% of moisture, a break and three reductions in the 12% of moisture. In this treatment, the milling was complemented using a ball-mill. The flours were analyzed with respect to physical, chemistry, rheology and functional characteristics, using a 3 x

  18. Mechanical behaviour of AlSiC nano composites produced by ball milling and spark plasma sintering =

    Science.gov (United States)

    Buchheim, Claudia Sofia de Andrade Redondo Murilhas

    Neste trabalho foram produzidos nanocompositos de AlSiC misturando aluminio puro com nano particulas de SiC com diâmetro de 45 - 55 nm, usando, de forma sequencial, a tecnica da metalurgia do po e a compactacao por "Spark Plasma Sintering". O composito obtido apresentava graos com 100 nm de diâmetro, encontrandose as particulas de SiC localizadas, principalmente, nas fronteiras de grao. O nanocomposito sob a forma de provetes cilindricos foi submetido a testes de compressao uniaxial e a testes de nanoindentacao para analisar a influencia das nanoparticulas de SiC, da fracao volumica de acido estearico e do tempo de moagem, nas propriedades mecânicas do material. Para efeitos de comparacao, utilizouse o comportamento mecânico do Al puro processado em condicoes similares e da liga de aluminio AA1050O. A tensao limite de elasticidade do nanocomposito com 1% Vol./Vol. de SiC e dez vezes superior a do AA1050. O refinamento de grao a escala nano constitui o principal mecanismo de aumento de resistencia mecânica. Na realidade, o Al nanocristalino sem reforco de particulas de SiC, apresenta uma tensao limite de elasticidade sete vezes superior a da liga AA1050O. A adicao de 0,5 % Vol./Vol. e de 1 % Vol./Vol. de SiC conduzem, respetivamente, ao aumento da tensao limite de elasticidade em 47 % e 50%. O aumento do tempo de moagem e a adicao de acido estearico ao po durante a moagem conduzem apenas a um pequeno aumento da tensao de escoamento. A dureza do material medida atraves de testes de nanoindentacao confirmaram os dados anteriores. A estabilidade das microestruturas do aluminio puro e do nanocomposito AlSiC, foi testada atraves de recozimento de restauracao realizado as temperaturas de 150 °C e 250 °C durante 2 horas. Aparentemente, o tratamento termico nao influenciou as propriedades mecânicas dos materiais, excepto do nanocomposito com 1 % Vol./Vol. de SiC restaurado a temperatura de 250 °C, para o qual se observou uma reducao da tensao limite de elasticidade

  19. Mismatch paciente-prótesis aórtica. Comparación alejada por eco-Doppler transtorácico versus el estimado en el preoperatorio

    Directory of Open Access Journals (Sweden)

    Gabriel Converso

    2008-01-01

    Full Text Available Introducción:El mismatch paciente-prótesis (MPP aórtica se asocia con peor evolución posoperatoria.La utilización del área del orificio aórtico efectivo (AOE para cada tipo de prótesis, indexado por la superficie corporal (SC en el momento quirúrgico, puede permitir la elección de un tamaño de prótesis adecuado para cada paciente y así evitar el MPP.ObjetivoComparar la estimación de MPP por las AOE tabuladas con la diagnosticada en el posoperatorio alejado por eco-Doppler.Material y métodosSe analizaron retrospectivamente 57 pacientes, 43 hombres, con prótesis aórtica, operados más de 6 meses antes del estudio. Se calculó la SC del parte quirúrgico y el AOE indexada tabulada, el AOE posquirúrgica con eco-Doppler transtorácico por la ecuación de continuidad y se comparó el MPP prequirúrgico y posquirúrgico. Se consideró MPP aórtico un AOE indexada < 0,75 cm2/m2.ResultadosSe observó una prevalencia de MPP preoperatorio del 29,8% y posoperatorio del 54,4% (p = 0,029, con el 31% de MMP grave. La prevalencia de sobrepeso en la muestra estudiada fue del 80%.ConclusionesEn este grupo de pacientes con alta prevalencia de sobrepeso, la estimación del AOE preoperatoria indexada por SC de cada tipo de prótesis para predecir el MPP posoperatorio mostró diferencias significativas entre el diagnóstico del MPP estimado en el preoperatorio y el calculado por eco-Doppler en el posoperatorio. En futuros estudios es necesaria la inclusión de un grupo poblacional mayor, así como la revisión del método de cálculo del área valvular (p. ej., del tracto de salida del ventrículo izquierdo.

  20. Superficie específica de una bentonita mediante la adsorción de azul de metileno

    OpenAIRE

    Pinzón Bello, Jorge Alejo

    2010-01-01

    Se estudió la determinación de la superficie específica de una bentonita colombiana, procedente del Valle del Cauca, mediante la adsorción de azul de metileno, a 298 K. Este método se comparó con el de la adsorción de nitrógeno a 77 K.