WorldWideScience

Sample records for superconductive electronics conference

  1. PREFACE: The 11th International Superconductive Electronics Conference (ISEC 07)

    Science.gov (United States)

    Miller, Donald L.; Wellstood, Fred; Donaldson, Gordon

    2007-11-01

    The 11th International Superconductive Electronics Conference (ISEC 07) was held in June 2007 in Washington, DC, USA. This special issue is a compendium of selected papers based on the technology presented at that meeting. ISEC, held on a biennial basis, traditionally rotates from Japan to Europe to the United States. The single exception to this rotation has been the 2003 conference which was held in Australia. This conference brings together the world's experts in superconductive electronics in a forum which is conducive to interaction among the participants with maximal interchange between the various topics. The conference this year was truly an international event with participation from 13 countries over six continents. The quality of presentations was also high. The conference witnessed the continued maturation of both digital/mixed signal electronics and SQUID-based instrumentation along with a number of novel devices. Of particular note was the transition of superconducting quantum computing research from a novel abstract concept to a broad-based research activity. The organizing committee was able to gather an exemplary group of invited speakers to share their results and visions for future progress. These presentations spanned both the subtopics of superconductor electronics and the history of the field. As I reflect on the efforts which went into making this conference a success, I must express my appreciation to many individuals and organizations, in no particular order. I would like to thank Northrop Grumman for their support for my activities as chair of the conference, both in terms of making my time available and for direct financial considerations. Centennial Conferences, as the conference organizer, provided invaluable guidance and administrative support. I would also like to acknowledge the support of the IEEE Council on Superconductivity, in particular in the persons of Moises Levy and John Spargo. I would be remiss if I did not thank John

  2. Superconducting electronics

    NARCIS (Netherlands)

    Rogalla, Horst

    1994-01-01

    During the last decades superconducting electronics has been the most prominent area of research for small scale applications of superconductivity. It has experienced quite a stormy development, from individual low frequency devices to devices with high integration density and pico second switching

  3. Superconductivity and superconductive electronics

    Science.gov (United States)

    Beasley, M. R.

    1990-12-01

    The Stanford Center for Research on Superconductivity and Superconductive Electronics is currently focused on developing techniques for producing increasingly improved films and multilayers of the high-temperature superconductors, studying their physical properties and using these films and multilayers in device physics studies. In general the thin film synthesis work leads the way. Once a given film or multilayer structure can be made reasonably routinely, the emphasis shifts to studying the physical properties and device physics of these structures and on to the next level of film quality or multilayer complexity. The most advanced thin films synthesis work in the past year has involved developing techniques to deposit a-axis and c-axis YBCO/PBCO superlattices and related structures. The in-situ feature is desirable because no solid state reactions with accompanying changes in volume, morphology, etc., that degrade the quality of the film involved.

  4. CONFERENCE SUMMARY: Summary and comment on superconducting analogue electronics research, including materials and fabrication, as presented at ISEC 07

    Science.gov (United States)

    Foley, C. P.

    2007-11-01

    The main theme at ISEC 2007 for superconducting materials, fabrication and analogue electronics was the description of incremental developments, including a few new directions that indicate breakthroughs in this area of research. The work on applications focused on their cost-benefit analysis (in order to improve their appeal), the development of simpler systems, making more of the data collected, improving packaging and being responsive to the power handling requirements for commercial systems. All papers presenting this level of research highlighted the importance of obtaining all the necessary details in order to investigate analogue devices and the effectiveness and commercial viability of their systems. This stage of development is important if we are to achieve the transition of superconducting electronics from the laboratory to commercial use. There were some exciting disruptive breakthroughs reported. These were in the areas of nano-SQUIDs, rotating gradiometers, superconducting scanning tunnelling microscopy (Hayashi et al) and the potential of superconducting photonics using optical interfaces with superconducting vortex flow transistors, for example. The materials research in low (LTS), high (HTS) and medium (MTS) critical temperature superconductors was reported. In LTS, nitrides emerged as important materials for use as new tunnel barriers, either insulating or semiconducting. Papers on BaN, NbN, TaN, GaN and Nb-Si superconducting materials were also presented. The MTS material of MgB2 is still under development (Zhao et al). There were also new research groups from South Africa and Turkey attending the conference. The fabrication research presented covered the areas of critical current Ic spread, which is still an issue in reducing the reproducibility of Josephson junctions, a 150 mm process for Nb/Al-AlOx/Nb and methods to improve barrier layers using both new materials and smooth surfaces at thin film interfaces (Du et al). New methods to make sub

  5. 17th International Conference on RF Superconductivity

    CERN Document Server

    2015-01-01

    RF superconductivity is the key technology of accelerators for particle physics, nuclear physics and light sources. SRF 2015 covered the latest advances in the science, technology, and applications of superconducting RF. There was also an industrial exhibit during the conference with the key vendors in the community available to discuss their capabilities and products.

  6. 17th International Conference on RF Superconductivity

    CERN Document Server

    Laxdal, Robert E.; Schaa, Volker R.W.

    2015-01-01

    RF superconductivity is the key technology of accelerators for particle physics, nuclear physics and light sources. SRF 2015 covered the latest advances in the science, technology, and applications of superconducting RF. There was also an industrial exhibit during the conference with the key vendors in the community available to discuss their capabilities and products.

  7. 13th European Conference on Applied Superconductivity

    CERN Document Server

    2017-01-01

    EUCAS is a worldwide forum for scientists and engineers, and provides an ideal platform to share knowledge and the most recent advances in all areas of applied superconductivity: from large-scale applications to miniature electronics devices, with a traditional focus on advanced materials and conductors. The broad scope is at the same time a challenge and an opportunity to foster novel, inter-disciplinary approaches and promote cross-fertilization among the various fields of applied superconductivity.

  8. Superconducting electron and hole lenses

    Science.gov (United States)

    Cheraghchi, H.; Esmailzadeh, H.; Moghaddam, A. G.

    2016-06-01

    We show how a superconducting region (S), sandwiched between two normal leads (N), in the presence of barriers, can act as a lens for propagating electron and hole waves by virtue of the so-called crossed Andreev reflection (CAR). The CAR process, which is equivalent to Cooper pair splitting into two N electrodes, provides a unique possibility of constructing entangled electrons in solid state systems. When electrons are locally injected from an N lead, due to the CAR and normal reflection of quasiparticles by the insulating barriers at the interfaces, sequences of electron and hole focuses are established inside another N electrode. This behavior originates from the change of momentum during electron-hole conversion beside the successive normal reflections of electrons and holes due to the barriers. The focusing phenomena studied here are fundamentally different from the electron focusing in other systems, such as graphene p-n junctions. In particular, due to the electron-hole symmetry of the superconducting state, the focusing of electrons and holes is robust against thermal excitations. Furthermore, the effects of the superconducting layer width, the injection point position, and barrier strength are investigated on the focusing behavior of the junction. Very intriguingly, it is shown that by varying the barrier strength, one can separately control the density of electrons or holes at the focuses.

  9. Superconducting Electronic Film Structures

    Science.gov (United States)

    1991-02-14

    cubic, yttria stabilized, zirconia (YSZ) single crystals with (100) orientation and ao = 0.512 to 0.516 nm. Films were magnetron-sputtered... Crown by Solid-State and Vapor-Phase Epitaxy," IEEE Trans. Uagn. 25(2), 2538 (1989). 6. J. H. Kang, R. T. Kampwirth, and K. E. Gray, "Superconductivity...summarized in Fig. 1, are too high for SrTiO3 or yttria- stabilized zirconia (YSZ) to be used in rf applications. MgO, LaAIO 3 , and LaGaO3 have a tan 6

  10. ASC 84: applied superconductivity conference. Final program and abstracts

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    Abstracts are given of presentations covering: superconducting device fabrication; applications of rf superconductivity; conductor stability and losses; detectors and signal processing; fusion magnets; A15 and Nb-Ti conductors; stability, losses, and various conductors; SQUID applications; new applications of superconductivity; advanced conductor materials; high energy physics applications of superconductivity; electronic materials and characterization; general superconducting electronics; ac machinery and new applications; digital devices; fusion and other large scale applications; in-situ and powder process conductors; ac applications; synthesis, properties, and characterization of conductors; superconducting microelectronics. (LEW)

  11. 2012 International Conference on Electrical and Electronics Engineering

    CERN Document Server

    Chen, Suting; Wei, Zhanming; Xia, Jingming

    2014-01-01

    Unifying Electrical Engineering and Electronics Engineering is based on the Proceedings of the 2012 International Conference on Electrical and Electronics Engineering (ICEE 2012). This book collects the peer reviewed papers presented at the conference. The aim of the conference is to unify the two areas of Electrical and Electronics Engineering. The book examines trends and techniques in the field as well as theories and applications. The editors have chosen to include the following topics; biotechnology, power engineering, superconductivity circuits, antennas technology, system architectures and telecommunication.

  12. Free electron laser and superconductivity

    CERN Document Server

    Iwata, A

    2003-01-01

    The lasing of the first free-electron laser (FEL) in the world was successfully carried out in 1977, so the history of FELs as a light source is not so long. But FELs are now utilized for research in many scientific and engineering fields owing to such characteristics as tunability of the wavelength, and short pulse and high peak power, which is difficult utilizing a common light source. Research for industrial applications has also been carried out in some fields, such as life sciences, semiconductors, nano-scale measurement, and others. The task for the industrial use of FEL is the realization of high energy efficiency and high optical power. As a means of promoting realization, the combining of an FEL and superconducting linac is now under development in order to overcome the thermal limitations of normal-conducting linacs. Further, since tuning the wavelength is carried out by changing the magnetic density of the undulator, which is now induced by moving part of the stack of permanent magnets, there is un...

  13. NATO Advanced Study Institute on Superconducting Electronics

    CERN Document Server

    Nisenhoff, Martin; Superconducting Electronics

    1989-01-01

    The genesis of the NATO Advanced Study Institute (ASI) upon which this volume is based, occurred during the summer of 1986 when we came to the realization that there had been significant progress during the early 1980's in the field of superconducting electronics and in applications of this technology. Despite this progress, there was a perception among many engineers and scientists that, with the possible exception of a limited number of esoteric fundamental studies and applications (e.g., the Josephson voltage standard or the SQUID magnetometer), there was no significant future for electronic systems incorporating superconducting elements. One of the major reasons for this perception was the aversion to handling liquid helium or including a closed-cycle helium liquefier. In addition, many critics felt that IBM's cancellation of its superconducting computer project in 1983 was "proof" that superconductors could not possibly compete with semiconductors in high-speed signal processing. From our persp...

  14. Artificial ice using superconducting vortices (Conference Presentation)

    Science.gov (United States)

    Trastoy Quintela, Juan; Malnou, Maxime; Ulysse, Christian; Bernard, Rozenn; Bergeal, Nicolas; Faini, Giancarlo; Lesueur, Jerome; Briatico, Javier; Villegas, Javier E.

    2016-10-01

    We use magnetic flux quanta (superconducting vortices) on artificial energy landscapes (pinning arrays) to create a new type of artificial ice. This vortex ice shows unusual temperature effects that offer new possibilities in the study of ice systems. We have investigated the matching of the flux lattice to pinning arrays that present geometrical frustration. The pinning arrays are fabricated on YBCO films using masked O+ ion irradiation. The details of the magneto-resistance imply that the flux lattice organizes into a vortex ice. The absence of history-dependent effects suggests that the vortex ice is highly ordered. Due to the technique used for the artificial energy landscape fabrication, we have the ability to change the pinning array geometry using temperature as a control knob. In particular we can switch the geometrical frustration on and off, which opens the door to performing a new type of annealing absent in other artificial ice systems. * Work supported by the French ANR "MASTHER", and the Fundación Barrié (Galicia, Spain)

  15. PREFACE: International Conference on Superconductivity and Magnetism-ICSM2008

    Science.gov (United States)

    Gencer, Ali; Grasso, Gianni

    2009-03-01

    The International Conference on Superconductivity and Magnetism (ICSM2008) was held at the congress centre of Ankara University in Side, Antalya, between 25-29 August 2008. The conference was the first conference on the combined fields of superconductivity and magnetism organized in Turkey at international level, and it had broad international participation from 42 countries, with registered delegates numbering over 400. A quarter of the attendees were research students. The conference attracted many of the best known leading scientists and experts in the field of superconductivity and magnetism from all over the world. The scientific program involved the presentation and discussion of 336 papers, classified as 65 invited, 81 oral and 190 posters. Submission of papers for the proceedings was on a volunteer basis and we therefore had nearly half of the presented papers, i.e. 30 submitted invited papers, peer-reviewed by Superconductor Science and Technology, and 85 submitted contributing papers, peer-reviewed by the organizers through processes administered by the Editorial Board and Scientific Committee. Reviews were conducted by expert referees at professional level and with the scientific standards expected of a proceedings journal issue published by IOP Publishing. The invited papers on superconductivity and magnetism with superconductivity were considered and processed for Superconductor Science and Technology by IOP itself. Although there are missing papers from some of the plenary speakers, we believe that this special issue of Superconductor Science and Technology (SUST) and the corresponding issue of Journal of Physics: Conference Series (JPCS) reflect most of the booming research in the fields of superconductivity and magnetism. We are very pleased to have worked with IOP on the conference proceedings, with special thanks to Dr Tom Miller and Dr Graham Douglas. Based on a refereed evaluation of all the papers and posters submitted, about 93 papers were

  16. PREFACE: 10th International Conference on Materials and Mechanisms of Superconductivity (M2S-X)

    Science.gov (United States)

    Greene, L. H.; Zhu, J.-X.; Wang, H.; Meen, J.; Lorenz, B.; Dong, X. L.; dela Cruz, C. R.; Carlson, E.; Bud'ko, S. L.; Bauer, E.; Paglione, J.

    2013-07-01

    The 2012 Materials and Mechanisms of Superconductivity Conference (M2S 2012), which occurs every three years, brought together world experts and young scientists to discuss open questions in the fundamental physics and applications of superconductors, and to disseminate the latest theoretical and experimental research results in superconductors and related novel materials. This conference of 600 participants acted as a valuable training ground in this technologically important area. We focused on key unanswered questions in high-temperature cuprate superconductors, high-temperature iron-based superconductors, topological superconductors, organic superconductors, and heavy-electron superconductors. The discovery of new materials and novel technological applications for electronic devices and for energy transmission and storage was emphasized. There were special sessions on superconductivity and energy, and outreach sessions, and an evening public lecture. There were also junior researcher symposia interspersed within the conference, thus providing an ideal environment for advanced graduate students and postdoctoral researchers to explore the latest theoretical and experimental methods used to investigate challenging questions in the physics of materials as it relates to both fundamental science and technological applications. These proceedings are an archival testament to the excitement in the field and provide a valuable snapshot of the cutting-edge research of 2012. We hope this will be a valuable resource to active researchers in the field as well as an encouraging volume to excite new researchers to the ever-growing, multifaceted field of superconductivity. We thank Bernd Lorenz and his Publications Committee for their tremendously creative and diligent work in putting this volume together. This Conference would not have been possible without the tireless work of our Program Committee, Chaired by Rick Greene and Co-Chaired by Mike Norman. Becky McDuffee, our

  17. Nuclear Electronics: Superconducting Detectors and Processing Techniques

    Science.gov (United States)

    Polushkin, Vladimir

    2004-06-01

    With the commercialisation of superconducting particles and radiation detectors set to occur in the very near future, nuclear analytical instrumentation is taking a big step forward. These new detectors have a high degree of accuracy, stability and speed and are suitable for high-density multiplex integration in nuclear research laboratories and astrophysics. Furthermore, superconducting detectors can also be successfully applied to food safety, airport security systems, medical examinations, doping tests & forensic investigations. This book is the first to address a new generation of analytical tools based on new superconductor detectors demonstrating outstanding performance unsurpassed by any other conventional devices. Presenting the latest research and development in nanometer technologies and biochemistry this book: * Discusses the development of nuclear sensing techniques. * Provides guidance on the design and use of the next generation of detectors. * Describes cryogenic detectors for nuclear measurements and spectrometry. * Covers primary detectors, front-end readout electronics and digital signal processing. * Presents applications in nanotechnology and modern biochemistry including DNA sequencing, proteinomics, microorganisms. * Features examples of two applications in X-ray electron probe nanoanalysis and time-of-flight mass spectrometry. This comprehensive treatment is the ideal reference for researchers, industrial engineers and graduate students involved in the development of high precision nuclear measurements, nuclear analytical instrumentation and advanced superconductor primary sensors. This book will also appeal to physicists, electrical and electronic engineers in the nuclear industry.

  18. Commercial Superconducting Electron Linac for Radioisotope Production

    Energy Technology Data Exchange (ETDEWEB)

    Grimm, Terry Lee [Niowave, Inc., Lansing, MI (United States); Boulware, Charles H. [Niowave, Inc., Lansing, MI (United States); Hollister, Jerry L. [Niowave, Inc., Lansing, MI (United States); Jecks, Randall W. [Niowave, Inc., Lansing, MI (United States); Mamtimin, Mayir [Niowave, Inc., Lansing, MI (United States); Starovoitova, Valeriia [Niowave, Inc., Lansing, MI (United States)

    2015-08-13

    The majority of radioisotopes used in the United States today come from foreign suppliers or are generated parasitically in large government accelerators and nuclear reactors. Both of these restrictions limit the availability of radioisotopes and discourage the development and evaluation of new isotopes and for nuclear medicine, science, and industry. Numerous studies have been recommending development of dedicated accelerators for production of radioisotopes for over 20 years (Institute of Medicine, 1995; Reba, et al, 2000; National Research Council, 2007; NSAC 2009). The 2015 NSAC Long Range Plan for Isotopes again identified electron accelerators as an area for continued research and development. Recommendation 1(c) from the 2015 NSAC Isotope report specifically identifies electron accelerators for continued funding for the purpose of producing medical and industrial radioisotopes. Recognizing the pressing need for new production methods of radioisotopes, the United States Congress passed the American Medical Isotope Production Act of 2012 to develop a domestic production of 99Mo and to eliminate the use of highly enriched uranium (HEU) in the production of 99Mo. One of the advantages of high power electron linear accelerators (linacs) is they can create both proton- and neutron-rich isotopes by generating high energy x-rays that knock out protons or neutrons from stable atoms or by fission of uranium. This allows for production of isotopes not possible in nuclear reactors. Recent advances in superconducting electron linacs have decreased the size and complexity of these systems such that they are economically competitive with nuclear reactors and large, high energy accelerators. Niowave, Inc. has been developing a radioisotope production facility based on a superconducting electron linac with liquid metal converters.

  19. Electron Source based on Superconducting RF

    Science.gov (United States)

    Xin, Tianmu

    High-bunch-charge photoemission electron-sources operating in a Continuous Wave (CW) mode can provide high peak current as well as the high average current which are required for many advanced applications of accelerators facilities, for example, electron coolers for hadron beams, electron-ion colliders, and Free-Electron Lasers (FELs). Superconducting Radio Frequency (SRF) has many advantages over other electron-injector technologies, especially when it is working in CW mode as it offers higher repetition rate. An 112 MHz SRF electron photo-injector (gun) was developed at Brookhaven National Laboratory (BNL) to produce high-brightness and high-bunch-charge bunches for electron cooling experiments. The gun utilizes a Quarter-Wave Resonator (QWR) geometry for a compact structure and improved electron beam dynamics. The detailed RF design of the cavity, fundamental coupler and cathode stalk are presented in this work. A GPU accelerated code was written to improve the speed of simulation of multipacting, an important hurdle the SRF structure has to overcome in various locations. The injector utilizes high Quantum Efficiency (QE) multi-alkali photocathodes (K2CsSb) for generating electrons. The cathode fabrication system and procedure are also included in the thesis. Beam dynamic simulation of the injector was done with the code ASTRA. To find the optimized parameters of the cavities and beam optics, the author wrote a genetic algorithm Python script to search for the best solution in this high-dimensional parameter space. The gun was successfully commissioned and produced world record bunch charge and average current in an SRF photo-injector.

  20. 5th International Conference on Superconductivity and Magnetism

    CERN Document Server

    2016-01-01

    We are honored to invite you to join ICSM2016 in Guangzhou and celebrate 40 years of ICSM, the longest-running conference series in the field of conducting and semiconducting organic materials started in 1976 in Siofok (Hungary) which has now become the premiere venue for discussion of the latest developments in the areas of organic electronics and photonics, from synthesis to characterization, computational modeling, device fabrication, and real-world applications.

  1. Superconducting Microwave Electronics at Lewis Research Center

    Science.gov (United States)

    Warner, Joseph D.; Bhasin, Kul B.; Leonard, Regis F.

    1991-01-01

    Over the last three years, NASA Lewis Research Center has investigated the application of newly discovered high temperature superconductors to microwave electronics. Using thin films of YBa2Cu3O7-delta and Tl2Ca2Ba2Cu3Ox deposited on a variety of substrates, including strontium titanate, lanthanum gallate, lanthanum aluminate and magnesium oxide, a number of microwave circuits have been fabricated and evaluated. These include a cavity resonator at 60 GHz, microstrip resonators at 35 GHz, a superconducting antenna array at 35 GHz, a dielectric resonator at 9 GHz, and a microstrip filter at 5 GHz. Performance of some of these circuits as well as suggestions for other applications are reported.

  2. 2011 Aspen Winter Conference on Contrasting Superconductivity of Pnictides and Cuprates

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, P. [Aspen Center for Physics, CO (United States); Schmalian, J. [Aspen Center for Physics, CO (United States); Canfield, P. [Aspen Center for Physics, CO (United States); Chakravarty, S. [Aspen Center for Physics, CO (United States)

    2011-05-02

    Our quest for materials with better properties is closely integral to the fabric of our society. Currently the development of materials that will allow for improved generation, transport, and storage of energy is at the forefront of our research in condensed matter physics and materials science. Among these materials, compounds that exhibit correlated electron states and emergent phenomena such as superconductivity have great promise, but also difficulties that need to be overcome: problems associated with our need to reliably find, understand, improve and control these promising materials. At the same time, the field of correlated electrons represents the frontier of our understanding of the electronic properties of solids. It contains deep open scientific issues within the broad area of quantum phenomena in matter. The aim of this workshop is to explore and understand the physics of recently discovered Fe-based high-temperature superconductors and contrast and compare them with the cuprates. The superconductivity in iron pnictides, with transition temperatures in excess of 55 K, was discovered in early 2008. The impact of this discovery is comparable to cuprates discovered in 1986. At the same time a number of recent experimental developments in cuprates may lead to a shift in our thinking with regards to these materials. There is therefore much to be learned by devoting a conference in which both classes of superconductors are discussed, especially at this nascent stage of the pnictides.

  3. A New Approach for Direct Observation of Superconducting Electrons

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    @@ ASino-Japanese research team has succeeded in observing the superconducting electron directly by the photoemission spectroscopy with the highest yet resolution (360 μeV).Based on this, the researchers say,they will be able to solve problems regarding the exotic superconducting mechanism.

  4. Reviewing the Electronic Resources & Libraries Conference

    Science.gov (United States)

    Tijerina, Bonnie

    2008-01-01

    The third Electronic Resources & Libraries (ER&L) conference gathered at Georgia Institute of Technology's Global Learning and Conference Center in Atlanta, Georgia, March 18-21, 2008. Over 360 attendees, from six countries and from 80% of the United States, represented their libraries and organizations resulting in a diverse and…

  5. Modern aspects of Josephson dynamics and superconductivity electronics

    CERN Document Server

    Askerzade, Iman; Cantürk, Mehmet

    2017-01-01

    In this book new experimental investigations of properties of Josephson junctions and systems are explored with the help of recent developments in superconductivity. The theory of the Josephson effect is presented taking into account the influence of multiband and anisotropy effects in new superconducting compounds. Anharmonicity effects in current-phase relation on Josephson junctions dynamics are discussed. Recent studies in analogue and digital superconductivity electronics are presented. Topics of special interest include resistive single flux quantum logic in digital electronics. Application of Josephson junctions in quantum computing as superconducting quantum bits are analyzed. Particular attention is given to understanding chaotic behaviour of Josephson junctions and systems. The book is written for graduate students and researchers in the field of applied superconductivity.

  6. Conference: Superconductivity, theory and practical challenges of a quantum phenonemon | 25 August | Uni Dufour

    CERN Document Server

    2015-01-01

    On Tuesday, 25 August, J. Georg Bednorz (Nobel prize in physics 1987, IBM Research Zurich) and Louis Taillefer (physicist and professor at the University of Sherbrooke, Canada, and at the Canadian Institute for Advanced Research) will give a conference on the fascinating theme of superconductivity. "Superconductivity: theory and practical challenges of a quantum phenonemon" Uni Dufour Tuesday, 25 August at 7 p.m. This conference is organized by the Faculty of science of the University of Geneva, as part of the International Congress Materials and Mechanisms of Superconductivity (M2S - 2015). Discovered more than 100 years ago, superconductivity remains one of the most fascinating manifestations of the laws of physics, observable only at low temperatures. This phenomenon, which allows the transport of electricity without any loss of energy, leads to various technological applications, for example in magnetically levitated vehicles, in MRI and in ...

  7. Superconductivity

    CERN Document Server

    Ketterson, John B

    2008-01-01

    Conceived as the definitive reference in a classic and important field of modern physics, this extensive and comprehensive handbook systematically reviews the basic physics, theory and recent advances in the field of superconductivity. Leading researchers, including Nobel laureates, describe the state-of-the-art in conventional and unconventional superconductors at a particularly opportune time, as new experimental techniques and field-theoretical methods have emerged. In addition to full-coverage of novel materials and underlying mechanisms, the handbook reflects continued intense research into electron-phone based superconductivity. Considerable attention is devoted to high-Tc superconductivity, novel superconductivity, including triplet pairing in the ruthenates, novel superconductors, such as heavy-Fermion metals and organic materials, and also granular superconductors. What’s more, several contributions address superconductors with impurities and nanostructured superconductors. Important new results on...

  8. Electronic structure and superconductivity of FeSe-related superconductors.

    Science.gov (United States)

    Liu, Xu; Zhao, Lin; He, Shaolong; He, Junfeng; Liu, Defa; Mou, Daixiang; Shen, Bing; Hu, Yong; Huang, Jianwei; Zhou, X J

    2015-05-13

    FeSe superconductors and their related systems have attracted much attention in the study of iron-based superconductors owing to their simple crystal structure and peculiar electronic and physical properties. The bulk FeSe superconductor has a superconducting transition temperature (Tc) of ~8 K and it can be dramatically enhanced to 37 K at high pressure. On the other hand, its cousin system, FeTe, possesses a unique antiferromagnetic ground state but is non-superconducting. Substitution of Se with Te in the FeSe superconductor results in an enhancement of Tc up to 14.5 K and superconductivity can persist over a large composition range in the Fe(Se,Te) system. Intercalation of the FeSe superconductor leads to the discovery of the AxFe2-ySe2 (A = K, Cs and Tl) system that exhibits a Tc higher than 30 K and a unique electronic structure of the superconducting phase. A recent report of possible high temperature superconductivity in single-layer FeSe/SrTiO3 films with a Tc above 65 K has generated much excitement in the community. This pioneering work opens a door for interface superconductivity to explore for high Tc superconductors. The distinct electronic structure and superconducting gap, layer-dependent behavior and insulator-superconductor transition of the FeSe/SrTiO3 films provide critical information in understanding the superconductivity mechanism of iron-based superconductors. In this paper, we present a brief review of the investigation of the electronic structure and superconductivity of the FeSe superconductor and related systems, with a particular focus on the FeSe films.

  9. Proceedings of the fourth international conference and exhibition: World Congress on superconductivity. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    Krishen, K.; Burnham, C. [eds.] [National Aeronautics and Space Administration, Houston, TX (United States). Lyndon B. Johnson Space Center

    1994-12-31

    This document contains papers presented at the 4th International Conference Exhibition: World Congress on Superconductivity held at the Marriott Orlando World Center, Orlando, Florida, June 27--July 1, 1994. This conference encompassed research, technology, applications, funding, political, and social aspects of superconductivity. Specifically, the areas of research, technology, and development covered during the conference included high-temperature materials, thin films, C-60 based superconductors, persistent magnetic fields and shielding, fabrication methodology, space applications, physical applications, performance characterization, device applications, weak link effects and flux motion, accelerator technology, superconductivity energy, storage, future research and development directions, medical applications, granular superconductors, wire fabrication technology, computer applications, technical and commercial challenges, and power and energy applications. The key objective of this conference was to provide a forum for the world community to share technological results of recent advances made in the field of superconductivity and to discuss translation of the research to technology which will benefit humanity. More than 150 presentations were made at this conference. Individual papers are indexed separately on the Energy Data Bases.

  10. Development of superconducting acceleration cavity technology for free electron lasers

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jong Min; Lee, Byung Cheol; Kim, Sun Kook; Jeong, Young Uk; Cho, Sung Oh

    2000-10-01

    As a result of the cooperative research between the KAERI and Peking University, the key technologies of superconducting acceleration cavity and photoelectron gun have been developed for the application to high power free electron lasers. A 1.5-GHz, 1-cell superconducting RF cavity has been designed and fabricated by using pure Nb sheets. The unloaded Q values of the fabricated superconducting cavity has been measured to be 2x10{sup 9} at 2.5K, and 8x10{sup 9} at 1.8K. The maximum acceleration gradient achieved was 12 MeV/m at 2.5K, and 20MV/m at 1.8 K. A cryostat for the 1-cell superconducting cavity has been designed. As a source of electron beam, a DC photocathode electron gun has been designed and fabricated, which is composed of a photocathode evaporation chamber and a 100-keV acceleration chamber. The efficiency of the Cs2Te photocathode is 3% nominally at room temperature, 10% at 290 deg C. The superconducting photoelectron gun system developed has been estimated to be a good source of high-brightness electron beam for high-power free electron lasers.

  11. Local Electronic Structure and High Temperature Superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Emery, V. J.; Kivelson, S. A.

    1999-02-08

    It is argued that a new mechanism and many-body theory of superconductivity are required for doped correlated insulators. Here they review the essential features of and the experimental support for such a theory, in which the physics is driven by the kinetic energy.

  12. Unconventional superconductivity in low density electron systems and conventional superconductivity in hydrogen metallic alloys

    Science.gov (United States)

    Kagan, M. Yu.

    2016-06-01

    In this short review, we first discuss the results, which are mainly devoted to the generalizations of the famous Kohn-Luttinger mechanism of superconductivity in purely repulsive fermion systems at low electron densities. In the context of repulsive- U Hubbard model and Shubin-Vonsovsky model we consider briefly the superconducting phase diagrams and the symmetries of the order parameter in novel strongly correlated electron systems including idealized monolayer and bilayer graphene. We stress that purely repulsive fermion systems are mainly the subject of unconventional low-temperature superconductivity. To get the high temperature superconductivity in cuprates (with T C of the order of 100 K) we should proceed to the t-J model with the van der Waals interaction potential and the competition between short-range repulsion and long-range attraction. Finally we note that to describe superconductivity in metallic hydrogen alloys under pressure (with T C of the order of 200 K) it is reasonable to reexamine more conventional mechanisms connected with electron-phonon interaction. These mechanisms arise in the attractive- U Hubbard model with static onsite or intersite attractive potential or in more realistic theories (which include retardation effects) such as Migdal-Eliashberg strong coupling theory or even Fermi-Bose mixture theory of Ranninger et al. and its generalizations.

  13. PREFACE: 9th International Conference on Magnetic and Superconducting Materials (MSM15)

    Science.gov (United States)

    Eyyuphan Yakinci, M.; Tanatar, Bilal

    2016-01-01

    The Magnetic and Superconducting Materials (MSM) Conference, which is held biannually in many countries, started in 1999 as a scientific conference on magnetism and superconductivity and their application in materials. Today MSM conferences aim to bring together regional and international research groups and technologists of related companies to discuss new materials, their results and current problems in the areas of superconductivity, magnetism, novel materials and also in the general field of Low Temperature Physics. The main goal of the MSM conference series is to increase collaboration within the region and the third world countries, and with the international community among the scientists from the developed countries. It is only through the sharing of experience with scientists around the world that one could fully benefit from natural and human resources. During the MSM15 conference we have received more than 250 abstracts from 22 different countries, plenary, invited and contributed talks were presented and many scientific subjects were widely discussed. The contributions in this volume have been reviewed by the eminent international scientists and represent some of the invited and contributed talks presented during MSM15 conference. We would like to thank to all of the participants attending the conference and also international scientific committee for their contribution to a high level conference and its overall success. We also would like to thank to our sponsors İnönü University, Gazi University, Çukurova University, Abant İzzet Baysal University and Bülent Ecevit University and more than eight scientific companies during the conference. M. Eyyuphan Yakinci, Bilal Tanatar Editors

  14. Electronic Structure of New Superconducting Perovskite MgCNi3

    Institute of Scientific and Technical Information of China (English)

    Li CHEN; Hua LI; Liangmo MEI

    2004-01-01

    The electronic structures of new superconducting perovskite MgCNis and related compounds MgCNi2T (T=Co, Fe,and Cu) have been studied using MS-Xα method. In MgCNi3, the main peak of density of states is located below the Fermi level and dominated by Ni d. From the results of total energy calculations, it was found that the number of Ni valence electron decreases faster for the Fe-doped case than that for the Co-doped case. The valence state of Ni changes from +1.43 in MgCNi2Co to +3.02 in MgCNi2Fe. It was confirmed that Co and Fe dopants in MgCNi3 behave as a source of d-band holes and the suppression of superconductivity occurs faster for the Fe-doped case than that for the Co-doped case. In order to explain the fact that Co and Fe dopants in MgCNi3 behave as a source of d-band holes rather than magnetic scattering centers that quench superconductivity, we have also investigated the effects of electron (Cu) doping on the superconductivity and found that both electron (Cu) doping and hole (Co, Fe)doping quench superconductivity exist. Comparing with the hole (Co) doping, there was no much difference between Cu and Co doping. This suggests that Co and Fe doping do not actas magnetic impurity.

  15. Proceedings, 1972 Carahan Conference on Electronic Prosthetics.

    Science.gov (United States)

    Jackson, John S., Ed.; DeVore, R. William, Ed.

    Presented are 28 papers given at a 1972 conference on electronic prosthetics for the handicapped. Among the papers are the following titles: "Therapy for Cerebral Palsy Employing Artifician Sense Organs for Alternatives to Proprioceptive Feedback"; "Excessive Neuromuscular Time Delay as a Possible Cause of Poor Hand-Eye Coordination and…

  16. European roadmap on superconductive electronics - status and perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Anders, S. [Institute of Photonic Technology (IPHT), Department of Quantum Detection, Albert-Einstein-Str. 9, 07745 Jena (Germany); Blamire, M.G. [University of Cambridge, Department of Materials Science, Pembroke St, Cambridge CB2 3QZ (United Kingdom); Buchholz, F.-Im. [Physikalisch-Technische Bundesanstalt (PTB), Bundesallee 100, 38116 Braunschweig (Germany); Crete, D.-G. [Unite Mixte de Physique CNRS/THALES, 1 Avenue Augustin Fresnel, 91767 Palaiseau CEDEx (France); Cristiano, R. [Istituto di Cibernetica CNR, Via Campi Flegrei 34, 80078 Napoli (Italy); Febvre, P. [University of Savoie, IMEP-LAHC, CNRS UMR 5130, Campus scientifique, 73376 Le Bourget du Lac Cedex (France); Fritzsch, L. [Institute of Photonic Technology (IPHT), Department of Quantum Detection, Albert-Einstein-Str. 9, 07745 Jena (Germany); Herr, A. [Chalmers University of Technology, Department of Microtechnology and Nanoscience - MC2, SE-412 96 Goeteborg (Sweden); Il' ichev, E. [Institute of Photonic Technology (IPHT), Department of Quantum Detection, Albert-Einstein-Str. 9, 07745 Jena (Germany); Kohlmann, J. [Physikalisch-Technische Bundesanstalt (PTB), Bundesallee 100, 38116 Braunschweig (Germany); Kunert, J., E-mail: juergen.kunert@ipht-jena.d [Institute of Photonic Technology (IPHT), Department of Quantum Detection, Albert-Einstein-Str. 9, 07745 Jena (Germany); Meyer, H.-G. [Institute of Photonic Technology (IPHT), Department of Quantum Detection, Albert-Einstein-Str. 9, 07745 Jena (Germany); Niemeyer, J. [Physikalisch-Technische Bundesanstalt (PTB), Bundesallee 100, 38116 Braunschweig (Germany); Ortlepp, T. [Technische Universitaet Ilmenau, Theoretische Elektrotechnik, PF 10 05 65 D-98684 Ilmenau (Germany); Rogalla, H. [University of Twente, Fac. Science and Technology, P.O. Box 217, 7500 AE Enschede (Netherlands); Schurig, T. [Physikalisch-Technische Bundesanstalt (PTB), Berlin, Abbestr. 2-12, 10587 Berlin (Germany)

    2010-12-15

    Executive Summary: For four decades semiconductor electronics has followed Moore's law: with each generation of integration the circuit features became smaller, more complex and faster. This development is now reaching a wall so that smaller is no longer any faster. The clock rate has saturated at about 3-5 GHz and the parallel processor approach will soon reach its limit. The prime reason for the limitation the semiconductor electronics experiences is not the switching speed of the individual transistor, but its power dissipation and thus heat. Digital superconductive electronics is a circuit- and device-technology that is inherently faster at much less power dissipation than semiconductor electronics. It makes use of superconductors and Josephson junctions as circuit elements, which can provide extremely fast digital devices in a frequency range - dependent on the material - of hundreds of GHz: for example a flip-flop has been demonstrated that operated at 750 GHz. This digital technique is scalable and follows similar design rules as semiconductor devices. Its very low power dissipation of only 0.1 {mu}W per gate at 100 GHz opens the possibility of three-dimensional integration. Circuits like microprocessors and analogue-to-digital converters for commercial and military applications have been demonstrated. In contrast to semiconductor circuits, the operation of superconducting circuits is based on naturally standardized digital pulses the area of which is exactly the flux quantum {Phi}{sub 0}. The flux quantum is also the natural quantization unit for digital-to-analogue and analogue-to-digital converters. The latter application is so precise, that it is being used as voltage standard and that the physical unit 'Volt' is defined by means of this standard. Apart from its outstanding features for digital electronics, superconductive electronics provides also the most sensitive sensor for magnetic fields: the Superconducting Quantum Interference

  17. Flexible Microstrip Circuits for Superconducting Electronics

    Science.gov (United States)

    Chervenak, James; Mateo, Jennette

    2013-01-01

    Flexible circuits with superconducting wiring atop polyimide thin films are being studied to connect large numbers of wires between stages in cryogenic apparatus with low heat load. The feasibility of a full microstrip process, consisting of two layers of superconducting material separated by a thin dielectric layer on 5 mil (approximately 0.13 mm) Kapton sheets, where manageable residual stress remains in the polyimide film after processing, has been demonstrated. The goal is a 2-mil (approximately 0.051-mm) process using spin-on polyimide to take advantage of the smoother polyimide surface for achieving highquality metal films. Integration of microstrip wiring with this polyimide film may require high-temperature bakes to relax the stress in the polyimide film between metallization steps.

  18. European roadmap on superconductive electronics - status and perspectives

    Science.gov (United States)

    Anders, S.; Blamire, M. G.; Buchholz, F.-Im.; Crété, D.-G.; Cristiano, R.; Febvre, P.; Fritzsch, L.; Herr, A.; Il'ichev, E.; Kohlmann, J.; Kunert, J.; Meyer, H.-G.; Niemeyer, J.; Ortlepp, T.; Rogalla, H.; Schurig, T.; Siegel, M.; Stolz, R.; Tarte, E.; ter Brake, H. J. M.; Toepfer, H.; Villegier, J.-C.; Zagoskin, A. M.; Zorin, A. B.

    2010-12-01

    Executive SummaryFor four decades semiconductor electronics has followed Moore’s law: with each generation of integration the circuit features became smaller, more complex and faster. This development is now reaching a wall so that smaller is no longer any faster. The clock rate has saturated at about 3-5 GHz and the parallel processor approach will soon reach its limit. The prime reason for the limitation the semiconductor electronics experiences is not the switching speed of the individual transistor, but its power dissipation and thus heat. Digital superconductive electronics is a circuit- and device-technology that is inherently faster at much less power dissipation than semiconductor electronics. It makes use of superconductors and Josephson junctions as circuit elements, which can provide extremely fast digital devices in a frequency range - dependent on the material - of hundreds of GHz: for example a flip-flop has been demonstrated that operated at 750 GHz. This digital technique is scalable and follows similar design rules as semiconductor devices. Its very low power dissipation of only 0.1 μW per gate at 100 GHz opens the possibility of three-dimensional integration. Circuits like microprocessors and analogue-to-digital converters for commercial and military applications have been demonstrated. In contrast to semiconductor circuits, the operation of superconducting circuits is based on naturally standardized digital pulses the area of which is exactly the flux quantum Φ0. The flux quantum is also the natural quantization unit for digital-to-analogue and analogue-to-digital converters. The latter application is so precise, that it is being used as voltage standard and that the physical unit ‘Volt’ is defined by means of this standard. Apart from its outstanding features for digital electronics, superconductive electronics provides also the most sensitive sensor for magnetic fields: the Superconducting Quantum Interference Device (SQUID). Amongst

  19. 18th International Conference on Electronic Publishing

    CERN Document Server

    Dobreva, Milena

    2014-01-01

    The ways in which research data is used and handled continue to capture public attention and are the focus of increasing interest. Electronic publishing is intrinsic to digital data management, and relevant to the fields of data mining, digital publishing and social networks, with their implications for scholarly communication, information services, e-learning, e-business and the cultural heritage sector. This book presents the proceedings of the 18th International Conference on Electronic Publishing (ELPUB), held in Thessaloniki, Greece, in June 2014. The conference brings together researchers and practitioners to discuss the many aspects of electronic publishing, and the theme this year is 'Let's put data to use: digital scholarship for the next generation'. As well as examining the role of cultural heritage and service organisations in the creation, accessibility, duration and long-term preservation of data, it provides a discussion forum for the appraisal, citation and licensing of research data and the n...

  20. Covalent Electron Transfer Theory of Superconductivity

    Science.gov (United States)

    1992-06-19

    where n. and n, converge to establish the threshold density for the onset of superconductivity. 41 Comparison of ne(t) Inse (O) versus t for W = 0.5, 1...all temperatures according to ne(T) = n(7) - nt(T) , (58) where n() = n(Tc)[ I - nse(T) Inse (O)]. Thus, the fractional contribution of the threshold...approximately -1/2, thereby suggesting that Kerr- v,6t 2. For the transition metals with largely unpolarizable cores of closed p6 shells (i.e., noble gases

  1. Charge sensitivity of superconducting single-electron transistor

    Science.gov (United States)

    Korotkov, Alexander N.

    1996-10-01

    It is shown that the noise-limited charge sensitivity of a single-electron transistor using superconductors (of either SISIS- or NISIN-type) operating near the threshold of quasiparticle tunneling, can be considerably higher than that of a similar transistor made of normal metals or semiconductors. The reason is that the superconducting energy gap, in contrast to the Coulomb blockade, is not smeared by the finite temperature. We also discuss the increase of the maximum operation temperature due to superconductivity and the peaklike features on the I-V curve of SISIS structures.

  2. Electronic spin susceptibility of metallic superconductive nano-particles

    Institute of Scientific and Technical Information of China (English)

    Li Feng; Chen Zhi-Qian; Li Qing

    2006-01-01

    We have observed the thermodynamic properties of metallic superconductive nano-particles in the grand canonical ensemble; and the level distribution and the level correlation between the discrete electronic energy levels are considered in the calculation of the electronic spin susceptibility of the ensemble numerically. The quantum effect, even-odd effect and other special effects existing in the metallic nano-particles are also studied in this article.

  3. Electron transport in a mesoscopic superconducting ferromagnetic hybrid conductor

    Energy Technology Data Exchange (ETDEWEB)

    Giroud, M.; Hasselbach, K.; Courtois, H.; Pannetier, B. [Centre de Recherche sur les Tres Basses Temperatures, CNRS, 38 - Grenoble (France); Mailly, D. [Laboratoire de Photonique et de Nanostructures, 91 - Marcoussis (France)

    2003-01-01

    We present electrical transport experiments performed on submicron hybrid devices made of a ferromagnetic conductor (Co) and a superconducting (Al) electrode. The sample was patterned in order to separate the contributions of the Co conductor and of the Co-Al interface. We observed a strong influence of the Al electrode superconductivity on the resistance of the Co conductor. This effect is large only when the interface is highly transparent. We characterized the dependence of the observed resistance decrease on temperature, bias current and magnetic field. As the differential resistance of the ferromagnet exhibits a non-trivial asymmetry, we claim that the magnetic domain structure plays an important role in the electron transport properties of superconducting / ferromagnetic conductors. (authors)

  4. Theory of parametrically amplified electron-phonon superconductivity

    Science.gov (United States)

    Babadi, Mehrtash; Knap, Michael; Martin, Ivar; Refael, Gil; Demler, Eugene

    2017-07-01

    Ultrafast optical manipulation of ordered phases in strongly correlated materials is a topic of significant theoretical, experimental, and technological interest. Inspired by a recent experiment on light-induced superconductivity in fullerenes [M. Mitrano et al., Nature (London) 530, 461 (2016), 10.1038/nature16522], we develop a comprehensive theory of light-induced superconductivity in driven electron-phonon systems with lattice nonlinearities. In analogy with the operation of parametric amplifiers, we show how the interplay between the external drive and lattice nonlinearities lead to significantly enhanced effective electron-phonon couplings. We provide a detailed and unbiased study of the nonequilibrium dynamics of the driven system using the real-time Green's function technique. To this end, we develop a Floquet generalization of the Migdal-Eliashberg theory and derive a numerically tractable set of quantum Floquet-Boltzmann kinetic equations for the coupled electron-phonon system. We study the role of parametric phonon generation and electronic heating in destroying the transient superconducting state. Finally, we predict the transient formation of electronic Floquet bands in time- and angle-resolved photoemission spectroscopy experiments as a consequence of the proposed mechanism.

  5. Theory of parametrically amplified electron-phonon superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Babadi, Mehrtash; Knap, Michael; Martin, Ivar; Refael, Gil; Demler, Eugene

    2017-07-01

    Ultrafast optical manipulation of ordered phases in strongly correlated materials is a topic of significant theoretical, experimental, and technological interest. Inspired by a recent experiment on light-induced superconductivity in fullerenes [M. Mitrano et al., Nature (London) 530, 461 (2016)], we develop a comprehensive theory of light-induced superconductivity in driven electron-phonon systemswith lattice nonlinearities. In analogy with the operation of parametric amplifiers, we show how the interplay between the external drive and lattice nonlinearities lead to significantly enhanced effective electron-phonon couplings. We provide a detailed and unbiased study of the nonequilibrium dynamics of the driven system using the real-time Green's function technique. To this end, we develop a Floquet generalization of the Migdal-Eliashberg theory and derive a numerically tractable set of quantum Floquet-Boltzmann kinetic equations for the coupled electron-phonon system. We study the role of parametric phonon generation and electronic heating in destroying the transient superconducting state. Finally, we predict the transient formation of electronic Floquet bands in time-and angle-resolved photoemission spectroscopy experiments as a consequence of the proposed mechanism.

  6. Microscopic Superconductivity and Room Temperature Electronics of High-Tc Cuprates

    Institute of Scientific and Technical Information of China (English)

    LIU Fu-Sui; CHEN Wan-Fang

    2008-01-01

    This paper points out that the Landau criterion for macroscopic superfluidity of He H is only a criterion for microscopic superfluidity of 4He, extends the Landau criterion to microscopic superconductivity in fermions (electron and hole) system and system with Cooper pairs without long-range phase coherence. This paper gives another three non-superconductive systems that are of microscopic superconductivity. This paper demonstrates that one application of microscopic superconductivity is to establish room temperature electronics of the high-To cuprates.

  7. Electronic coolers based on superconducting tunnel junctions: fundamentals and applications

    OpenAIRE

    2014-01-01

    International audience; Thermo-electric transport at the nano-scale is a rapidly developing topic, in particular in superconductor-based hybrid devices. In this review paper, we first discuss the fundamental principles of electronic cooling in mesoscopic superconducting hybrid structures, the related limitations and applications. We review recent work performed in Grenoble on the effects of Andreev reflection, photonic heat transport, phonon cooling, as well as on an innovative fabrication te...

  8. Electronic thermal conductivity in a superconducting vortex state

    Energy Technology Data Exchange (ETDEWEB)

    Adachi, H. [Department of Physics, Okayama University, Tsushima, Okayama 700-8530 (Japan)], E-mail: adachi@itp.phys.ethz.ch; Miranovic, P. [Department of Physics, University of Montenegro, Podgorica 81000 (Montenegro); Ichioka, M.; Machida, K. [Department of Physics, Okayama University, Tsushima, Okayama 700-8530 (Japan)

    2007-10-01

    The longitudinal component of the electronic thermal conductivity {kappa}{sub xx} in a superconducting vortex state is calculated as a function of magnetic field B. Calculations are performed by taking account of the spatial dependence of normal Green's function g, which was neglected in the previous studies using the Brandt-Pesch-Tewordt method. We discuss the possibility of using {kappa}{sub xx}(B) as a probe of the pair potential symmetry.

  9. Electronic thermal conductivity in a superconducting vortex state

    Science.gov (United States)

    Adachi, H.; Miranovic, P.; Ichioka, M.; Machida, K.

    2007-10-01

    The longitudinal component of the electronic thermal conductivity κxx in a superconducting vortex state is calculated as a function of magnetic field B. Calculations are performed by taking account of the spatial dependence of normal Green's function g, which was neglected in the previous studies using the Brandt-Pesch-Tewordt method. We discuss the possibility of using κxx(B) as a probe of the pair potential symmetry.

  10. Superconductivity

    CERN Document Server

    Poole, Charles P; Farach, Horacio A

    1995-01-01

    Superconductivity covers the nature of the phenomenon of superconductivity. The book discusses the fundamental principles of superconductivity; the essential features of the superconducting state-the phenomena of zero resistance and perfect diamagnetism; and the properties of the various classes of superconductors, including the organics, the buckministerfullerenes, and the precursors to the cuprates. The text also describes superconductivity from the viewpoint of thermodynamics and provides expressions for the free energy; the Ginzburg-Landau and BCS theories; and the structures of the high

  11. Simulated Performance of the Wisconsin Superconducting Electron Gun

    Energy Technology Data Exchange (ETDEWEB)

    R.A. Bosch, K.J. Kleman, R.A. Legg

    2012-07-01

    The Wisconsin superconducting electron gun is modeled with multiparticle tracking simulations using the ASTRA and GPT codes. To specify the construction of the emittance-compensation solenoid, we studied the dependence of the output bunch's emittance upon the solenoid's strength and field errors. We also evaluated the dependence of the output bunch's emittance upon the bunch's initial emittance and the size of the laser spot on the photocathode. The results suggest that a 200-pC bunch with an emittance of about one mm-mrad can be produced for a free-electron laser.

  12. Electron spin resonance detected by a superconducting qubit

    CERN Document Server

    Kubo, Y; Grezes, C; Umeda, T; Isoya, J; Sumiya, H; Yamamoto, T; Abe, H; Onoda, S; Ohshima, T; Jacques, V; Dréau, A; Roch, J -F; Auffeves, A; Vion, D; Esteve, D; Bertet, P

    2012-01-01

    A new method for detecting the magnetic resonance of electronic spins at low temperature is demonstrated. It consists in measuring the signal emitted by the spins with a superconducting qubit that acts as a single-microwave-photon detector, resulting in an enhanced sensitivity. We implement this new type of electron-spin resonance spectroscopy using a hybrid quantum circuit in which a transmon qubit is coupled to a spin ensemble consisting of NV centers in diamond. With this setup we measure the NV center absorption spectrum at 30mK at an excitation level of \\thicksim15\\,\\mu_{B} out of an ensemble of 10^{11} spins.

  13. Construction and Test of a Novel Superconducting RF Electron gun

    Energy Technology Data Exchange (ETDEWEB)

    Bisognano, Joseph J. [University of Wisconsin-Madison

    2014-04-16

    The University of Wisconsin-Madison has completed installation of a superconducting electron gun. Its concept was optimized to be the source for a CW free electron laser facility with multiple megahertz repetition rate end stations. This VHF superconducting configuration holds the promise of the highest performance for CW injectors. Initial commissioning efforts show that the cavity can achieve gradients of 35 MV/m at the cathode position. With the cathode inserted CW operation has been achieved at 20 MV/m with good control of microphonics, negligible dark current, and Q0 > 3×109 at 4 K. Bunch charges of ~100 pC have been delivered, and first simple beam measurements made. These preliminary results are very encouraging for production of 100s pC bunches with millimeter-milliradian or smaller normalized emittances. Plans are in place to carry out more definitive studies to establish the full capabilities. However, since the grant was not renewed, the electron gun is currently mothballed, and without supplemental fund the opportunity for further work will be lost.

  14. Superconductivity

    CERN Document Server

    Thomas, D B

    1974-01-01

    A short general review is presented of the progress made in applied superconductivity as a result of work performed in connection with the high-energy physics program in Europe. The phenomenon of superconductivity and properties of superconductors of Types I and II are outlined. The main body of the paper deals with the development of niobium-titanium superconducting magnets and of radio-frequency superconducting cavities and accelerating structures. Examples of applications in and for high-energy physics experiments are given, including the large superconducting magnet for the Big European Bubble Chamber, prototype synchrotron magnets for the Super Proton Synchrotron, superconducting d.c. beam line magnets, and superconducting RF cavities for use in various laboratories. (0 refs).

  15. Positron annihilation lifetime spectroscopy at a superconducting electron accelerator

    Science.gov (United States)

    Wagner, A.; Anwand, W.; Attallah, A. G.; Dornberg, G.; Elsayed, M.; Enke, D.; Hussein, A. E. M.; Krause-Rehberg, R.; Liedke, M. O.; Potzger, K.; Trinh, T. T.

    2017-01-01

    The Helmholtz-Zentrum Dresden-Rossendorf operates a superconducting linear accelerator for electrons with energies up to 35 MeV and average beam currents up to 1.6 mA. The electron beam is employed for production of several secondary beams including X-rays from bremsstrahlung production, neutrons, and positrons. The secondary positron beam after moderation feeds the Monoenergetic Positron Source (MePS) where positron annihilation lifetime (PALS) and positron annihilation Doppler-broadening experiments in materials science are performed in parallel. The adjustable repetition rate of the continuous-wave electron beams allows matching of the pulse separation to the positron lifetime in the sample under study. The energy of the positron beam can be set between 0.5 keV and 20 keV to perform depth resolved defect spectroscopy and porosity studies especially for thin films.

  16. Conceptual design of industrial free electron laser using superconducting accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Saldin, E.L.; Schneidmiller, E.A.; Ulyanov, Yu.N. [Automatic Systems Corporation, Samara (Russian Federation)] [and others

    1995-12-31

    Paper presents conceptual design of free electron laser (FEL) complex for industrial applications. The FEL complex consists of three. FEL oscillators with the optical output spanning the infrared (IR) and ultraviolet (UV) wave-lengths ({lambda} = 0.3...20 {mu}m) and with the average output power 10 - 20 kW. The driving beam for the FELs is produced by a superconducting accelerator. The electron beam is transported to the FELs via three beam lines (125 MeV and 2 x 250 MeV). Peculiar feature of the proposed complex is a high efficiency of the. FEL oscillators, up to 20 %. This becomes possible due to the use of quasi-continuous electron beam and the use of the time-dependent undulator tapering.

  17. Superconductivity in an electron band just above the Fermi level: possible route to BCS-BEC superconductivity.

    Science.gov (United States)

    Okazaki, K; Ito, Y; Ota, Y; Kotani, Y; Shimojima, T; Kiss, T; Watanabe, S; Chen, C-T; Niitaka, S; Hanaguri, T; Takagi, H; Chainani, A; Shin, S

    2014-02-28

    Conventional superconductivity follows Bardeen-Cooper-Schrieffer(BCS) theory of electrons-pairing in momentum-space, while superfluidity is the Bose-Einstein condensation(BEC) of atoms paired in real-space. These properties of solid metals and ultra-cold gases, respectively, are connected by the BCS-BEC crossover. Here we investigate the band dispersions in FeTe(0.6)Se(0.4)(Tc = 14.5 K ~ 1.2 meV) in an accessible range below and above the Fermi level(EF) using ultra-high resolution laser angle-resolved photoemission spectroscopy. We uncover an electron band lying just 0.7 meV (~8 K) above EF at the Γ-point, which shows a sharp superconducting coherence peak with gap formation below Tc. The estimated superconducting gap Δ and Fermi energy [Symbol: see text]F indicate composite superconductivity in an iron-based superconductor, consisting of strong-coupling BEC in the electron band and weak-coupling BCS-like superconductivity in the hole band. The study identifies the possible route to BCS-BEC superconductivity.

  18. Electronic structure and superconductivity of MgB2

    Indian Academy of Sciences (India)

    D M Gaitonde; P Modak; R S Rao; B K Godwal

    2003-01-01

    Results of ab initio electronic structure calculations on the compound, MgB2, using the FPLAPW method employing GGA for the exchange–correlation energy are presented. Total energy minimization enables us to estimate the equilibrium volume, / ratio and the bulk modulus, all of which are in excellent agreement with experiment. We obtain the mass enhancement parameter by using our calculated, $D(E_F)$ and the experimental specific heat data. The $T_c$ is found to be 37 K. We use a parametrized description of the calculated band structure to obtain the = 0 K values of the London penetration depth and the superconducting coherence length. The penetration depth calculated by us is too small and the coherence length too large as compared to the experimentally determined values of these quantities. This indicates the limitations of a theory that relies only on electronic structure calculations in describing the superconducting state in this material and implies that impurity effects as well as mass renormalization effects need to be included.

  19. Anisotropic effect of appearing superconductivity on the electron transport in FeSe

    Science.gov (United States)

    Grigoriev, P. D.; Sinchenko, A. A.; Kesharpu, K. K.; Shakin, A.; Mogilyuk, T. I.; Orlov, A. P.; Frolov, A. V.; Lyubshin, D. S.; Chareev, D. A.; Volkova, O. S.; Vasiliev, A. N.

    2017-06-01

    A theoretical model has been proposed to describe the conductivity of a layered anisotropic normal metal containing small superconducting inclusions at an arbitrary eccentricity of spheroidal superconducting islands. The electron transport and magnetic properties of FeSe single crystals have been measured. The results indicate the existence of superconductivity at temperatures much higher than the critical superconducting transition temperature corresponding to vanishing electrical resistance. Within the proposed model, quantitative agreement has been achieved between the volume fraction of superconducting inclusions and its temperature dependence determined from the transport and magnetic measurements.

  20. Superconductivity

    Science.gov (United States)

    1989-07-01

    SUPERCONDUCTIVITY HIGH-POWER APPLICATIONS Electric power generation/transmission Energy storage Acoustic projectors Weapon launchers Catapult Ship propulsion • • • Stabilized...temperature superconductive shields could be substantially enhanced by use of high-Tc materials. 27 28 NRAC SUPERCONDUCTIVITY SHIP PROPULSION APPLICATIONS...motor shown in the photograph. As a next step in the evolution of electric-drive ship propulsion technology, DTRC has proposed to scale up the design

  1. Electronic heat current rectification in hybrid superconducting devices

    Energy Technology Data Exchange (ETDEWEB)

    Fornieri, Antonio, E-mail: antonio.fornieri@sns.it; Giazotto, Francesco, E-mail: francesco.giazotto@sns.it [NEST, Istituto Nanoscienze-CNR and Scuola Normale Superiore, I-56127 Pisa (Italy); Martínez-Pérez, María José [Physikalisches Institut - Experimentalphysik II Universität Tübingen, D-72076 Tübingen (Germany)

    2015-05-15

    In this work, we review and expand recent theoretical proposals for the realization of electronic thermal diodes based on tunnel-junctions of normal metal and superconducting thin films. Starting from the basic rectifying properties of a single hybrid tunnel junction, we will show how the rectification efficiency can be largely increased by combining multiple junctions in an asymmetric chain of tunnel-coupled islands. We propose three different designs, analyzing their performance and their potential advantages. Besides being relevant from a fundamental physics point of view, this kind of devices might find important technological application as fundamental building blocks in solid-state thermal nanocircuits and in general-purpose cryogenic electronic applications requiring energy management.

  2. Electronic Conference Tracking and Approval System

    Data.gov (United States)

    US Agency for International Development — eCTAS tracks information relevant to attendance and hosting conferences of USAID's Washington offices and Missions worldwide including cost, numbers attending,...

  3. 2012 International Conference on Mechanical and Electronic Engineering

    CERN Document Server

    Lin, Sally; ICMEE2012; Advances in Mechanical and Electronic Engineering v.2

    2012-01-01

    This book includes the volume 2 of the proceedings of the 2012 International Conference on Mechanical and Electronic Engineering(ICMEE2012), held at June 23-24,2012 in Hefei, China. The conference provided a rare opportunity to bring together worldwide researchers who are working in the fields. This volume 2 is focusing on Mechatronic Engineering and Technology,  Electronic Engineering and Electronic Information Technology .

  4. PREFACE: International Conference on Strongly Correlated Electron Systems (SCES 2011)

    Science.gov (United States)

    Littlewood, P. B.; Lonzarich, G. G.; Saxena, S. S.; Sutherland, M. L.; Sebastian, S. E.; Artacho, E.; Grosche, F. M.; Hadzibabic, Z.

    2012-11-01

    The Strongly Correlated Electron Systems Conference (SCES) 2011, was held from 29 August-3 September 2011, in Cambridge, UK. SCES'2011 was dedicated to 100 years of superconductivity and covered a range of topics in the area of strongly correlated systems. The correlated electronic and magnetic materials featured include f-electron based heavy fermion intermetallics and d-electron based transition metal compounds. The meeting welcomed to Cambridge 657 participants from 23 countries, who presented 127 talks (including 16 plenary, 57 invited, and 54 contributed) and 736 posters in 40 sessions over five full days of meetings. This proceedings volume contains papers reporting on the science presented at the meeting. This work deepens our understanding of the rich physical phenomena that arise from correlation effects. Strongly correlated systems are known for their remarkable array of emergent phenomena: the traditional subjects of superconductivity, magnetism and metal-insulator transitions have been joined by non-Fermi liquid phenomena, topologically protected quantum states, atomic and photonic gases, and quantum phase transitions. These are some of the most challenging and interesting phenomena in science. As well as the science driver, there is underlying interest in energy-dense materials, which make use of 'small' electrons packed to the highest possible density. These are by definition 'strongly correlated'. For example: good photovoltaics must be efficient optical absorbers, which means that photons will generate tightly bound electron-hole pairs (excitons) that must then be ionised at a heterointerface and transported to contacts; efficient solid state refrigeration depends on substantial entropy changes in a unit cell, with large local electrical or magnetic moments; efficient lighting is in a real sense the inverse of photovoltaics; the limit of an efficient battery is a supercapacitor employing mixed valent ions; fuel cells and solar to fuel conversion

  5. 2010 CORRELATED ELECTRON SYSTEMS GORDON RESEARCH CONFERENCE, JUNE 13-18, 2010 For

    Energy Technology Data Exchange (ETDEWEB)

    Dmitri Basov

    2010-06-18

    The 2010 Gordon Conference on Correlated Electron Systems will present cutting-edge research on emergent properties arising from strong electronic correlations. The Conference will feature a wide range of topics, such as the role of topology in condensed matter systems, quantum Hall interferometry and non-Abelian statistics, quantum criticality, metal-insulator transition, quantum effects in conductivity, Dirac quasiparticles, and superconductivity in cuprates and pnictides. In addition, we are reserving two sessions for new developments in this field that may arise in the coming year. The Conference will bring together a collection of investigators who are at the forefront of their field, and will provide opportunities for junior scientists and graduate students to present their work in poster format and exchange ideas with leaders in the field. We intend to have talks by established leaders in the field and also by young researchers who have made seminal contributions to various aspects of correlated electron physics, The collegial atmosphere of this Conference, with programmed discussion sessions as well as opportunities for informal gatherings in the afternoons and evenings, provides an avenue for scientists from different disciplines to brainstorm and promotes cross-disciplinary collaborations in the various research areas represented.

  6. 2010 Gordon Research Conference on Correlated Electron Systems: Final Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Basov, Dmitri N. [Univ. of California, San Diego, CA (United States)

    2010-06-18

    The 2010 Gordon Conference on Correlated Electron Systems will present cutting-edge research on emergent properties arising from strong electronic correlations. The Conference will feature a wide range of topics, such as the role of topology in condensed matter systems, quantum Hall interferometry and non-Abelian statistics, quantum criticality, metal-insulator transition, quantum effects in conductivity, Dirac quasiparticles, and superconductivity in cuprates and pnictides. In addition, we are reserving two sessions for new developments in this field that may arise in the coming year. The Conference will bring together a collection of investigators who are at the forefront of their field, and will provide opportunities for junior scientists and graduate students to present their work in poster format and exchange ideas with leaders in the field. We intend to have talks by established leaders in the field and also by young researchers who have made seminal contributions to various aspects of correlated electron physics, The collegial atmosphere of this Conference, with programmed discussion sessions as well as opportunities for informal gatherings in the afternoons and evenings, provides an avenue for scientists from different disciplines to brainstorm and promotes cross-disciplinary collaborations in the various research areas represented.

  7. Pressure-driven dome-shaped superconductivity and electronic structural evolution in tungsten ditelluride

    National Research Council Canada - National Science Library

    Pan, Xing-Chen; Chen, Xuliang; Liu, Huimei; Feng, Yanqing; Wei, Zhongxia; Zhou, Yonghui; Chi, Zhenhua; Pi, Li; Yen, Fei; Song, Fengqi; Wan, Xiangang; Yang, Zhaorong; Wang, Baigeng; Wang, Guanghou; Zhang, Yuheng

    2015-01-01

    ... T. Motivated by the presence of a small, sensitive Fermi surface of 5d electronic orbitals, we boost the electronic properties by applying a high pressure, and introduce superconductivity successfully...

  8. International Conference on Nano-electronics, Circuits & Communication Systems

    CERN Document Server

    2017-01-01

    This volume comprises select papers from the International Conference on Nano-electronics, Circuits & Communication Systems(NCCS). The conference focused on the frontier issues and their applications in business, academia, industry, and other allied areas. This international conference aimed to bring together scientists, researchers, engineers from academia and industry. The book covers technological developments and current trends in key areas such as VLSI design, IC manufacturing, and applications such as communications, ICT, and hybrid electronics. The contents of this volume will prove useful to researchers, professionals, and students alike.

  9. Investigation of Properties of Motion of Superconductive Electrons in Superconductors by Nonlinear Quantum Mechanical Theory

    Institute of Scientific and Technical Information of China (English)

    Xiao-Feng Pang

    2008-01-01

    The properties and rules of motion of superconductive electrons in steady and time-dependent non-equilibrium states of superconductors are studied by using the Ginzberg-Landau (GL) equations and nonlinear quantum theory. In the absence of external fields, the superconductive electrons move in the solitons with certain energy and velocity in a uniform system, The superconductive electron is still a soliton under action of an electromagnetic field, but its amplitude, phase and shape are changed. Thus we conclude that super- conductivity is a result of motion of soliton of superconductive electrons. Since soliton has the feature of motion for retaining its energy and form, thus a permanent current occurs in superconductor. From these solutions of GL equations under action of an electromagnetic field, we gain the structure of vortex lines-magnetic flux lines observed experimentally in type-II superconductors. In the time-dependent non- equilibrium states of superconductor, the motions of superconductive electrons exhibit still the soliton features, but the shape and amplitude have changed. In an invariant electric-field, it moves in a constant acceleration. In the medium with dissipation, the superconductive electron behaves still like a soliton, although its form, amplitude, and velocity are altered. Thus we have to convince that the superconductive electron is essentially a soliton in both non-equilibrium and equilibrium superconductors.

  10. Emittance minimization at the ELBE superconducting electron gun

    Energy Technology Data Exchange (ETDEWEB)

    Moeller, K.; Arnold, A.; Lu, P.; Murcek, P.; Teichert, J.; Vennekate, H.; Xiang, R.

    2014-07-01

    The transverse emittance is one of the most important quantities which characterize the quality of an electron source. For high quality experiments low beam emittance is required. By means of theoretical considerations and simulation calculations we have studied how the emittance of the Rossendorf superconducting radio-frequency photoelectron source (SRF gun) can be minimized. It turned out that neither a solenoid magnet nor the effect of space charge forces is needed to create a pronounced emittance minimum. The minimum appears by just adjusting the starting phase of the electron bunch with respect to the RF phase of the gun in a suitable way. Investigation of various correlations between the properties of the beam particles led to an explanation on how the minimum comes about. It is shown that the basic mechanism of minimization is the fact that the longitudinal properties of the particles (energy) are strongly influenced by the starting phase. Due to the coupling of the longitudinal and transverse degrees of freedom by the relativistic equation of motion the transverse degrees of freedom and thereby the emittance can be strongly influenced by the starting phase as well. The results obtained in this study will be applied to minimize the emittance in the commissioning phase of the SRF gun.

  11. Electronic origin of high-temperature superconductivity in single-layer FeSe superconductor.

    Science.gov (United States)

    Liu, Defa; Zhang, Wenhao; Mou, Daixiang; He, Junfeng; Ou, Yun-Bo; Wang, Qing-Yan; Li, Zhi; Wang, Lili; Zhao, Lin; He, Shaolong; Peng, Yingying; Liu, Xu; Chen, Chaoyu; Yu, Li; Liu, Guodong; Dong, Xiaoli; Zhang, Jun; Chen, Chuangtian; Xu, Zuyan; Hu, Jiangping; Chen, Xi; Ma, Xucun; Xue, Qikun; Zhou, X J

    2012-07-03

    The recent discovery of high-temperature superconductivity in iron-based compounds has attracted much attention. How to further increase the superconducting transition temperature (T(c)) and how to understand the superconductivity mechanism are two prominent issues facing the current study of iron-based superconductors. The latest report of high-T(c) superconductivity in a single-layer FeSe is therefore both surprising and significant. Here we present investigations of the electronic structure and superconducting gap of the single-layer FeSe superconductor. Its Fermi surface is distinct from other iron-based superconductors, consisting only of electron-like pockets near the zone corner without indication of any Fermi surface around the zone centre. Nearly isotropic superconducting gap is observed in this strictly two-dimensional system. The temperature dependence of the superconducting gap gives a transition temperature T(c)~ 55 K. These results have established a clear case that such a simple electronic structure is compatible with high-T(c) superconductivity in iron-based superconductors.

  12. Pressure-driven dome-shaped superconductivity and electronic structural evolution in tungsten ditelluride.

    Science.gov (United States)

    Pan, Xing-Chen; Chen, Xuliang; Liu, Huimei; Feng, Yanqing; Wei, Zhongxia; Zhou, Yonghui; Chi, Zhenhua; Pi, Li; Yen, Fei; Song, Fengqi; Wan, Xiangang; Yang, Zhaorong; Wang, Baigeng; Wang, Guanghou; Zhang, Yuheng

    2015-07-23

    Tungsten ditelluride has attracted intense research interest due to the recent discovery of its large unsaturated magnetoresistance up to 60 T. Motivated by the presence of a small, sensitive Fermi surface of 5d electronic orbitals, we boost the electronic properties by applying a high pressure, and introduce superconductivity successfully. Superconductivity sharply appears at a pressure of 2.5 GPa, rapidly reaching a maximum critical temperature (Tc) of 7 K at around 16.8 GPa, followed by a monotonic decrease in Tc with increasing pressure, thereby exhibiting the typical dome-shaped superconducting phase. From theoretical calculations, we interpret the low-pressure region of the superconducting dome to an enrichment of the density of states at the Fermi level and attribute the high-pressure decrease in Tc to possible structural instability. Thus, tungsten ditelluride may provide a new platform for our understanding of superconductivity phenomena in transition metal dichalcogenides.

  13. Superconductivity

    CERN Document Server

    Poole, Charles P; Creswick, Richard J; Prozorov, Ruslan

    2014-01-01

    Superconductivity, Third Edition is an encyclopedic treatment of all aspects of the subject, from classic materials to fullerenes. Emphasis is on balanced coverage, with a comprehensive reference list and significant graphics from all areas of the published literature. Widely used theoretical approaches are explained in detail. Topics of special interest include high temperature superconductors, spectroscopy, critical states, transport properties, and tunneling. This book covers the whole field of superconductivity from both the theoretical and the experimental point of view. This third edition features extensive revisions throughout, and new chapters on second critical field and iron based superconductors.

  14. XXIII International Conference on Nonlinear Dynamics of Electronic Systems

    CERN Document Server

    Stoop, Ruedi; Stramaglia, Sebastiano

    2017-01-01

    This book collects contributions to the XXIII international conference “Nonlinear dynamics of electronic systems”. Topics range from non-linearity in electronic circuits to synchronisation effects in complex networks to biological systems, neural dynamics and the complex organisation of the brain. Resting on a solid mathematical basis, these investigations address highly interdisciplinary problems in physics, engineering, biology and biochemistry.

  15. Applied superconductivity

    CERN Document Server

    Newhouse, Vernon L

    1975-01-01

    Applied Superconductivity, Volume II, is part of a two-volume series on applied superconductivity. The first volume dealt with electronic applications and radiation detection, and contains a chapter on liquid helium refrigeration. The present volume discusses magnets, electromechanical applications, accelerators, and microwave and rf devices. The book opens with a chapter on high-field superconducting magnets, covering applications and magnet design. Subsequent chapters discuss superconductive machinery such as superconductive bearings and motors; rf superconducting devices; and future prospec

  16. Electron-phonon interaction and pairing mechanism in superconducting Ca-intercalated bilayer graphene

    Science.gov (United States)

    Margine, E. R.; Lambert, Henry; Giustino, Feliciano

    2016-01-01

    Using the ab initio anisotropic Eliashberg theory including Coulomb interactions, we investigate the electron-phonon interaction and the pairing mechanism in the recently-reported superconducting Ca-intercalated bilayer graphene. We find that C6CaC6 can support phonon-mediated superconductivity with a critical temperature Tc = 6.8–8.1 K, in good agreement with experimental data. Our calculations indicate that the low-energy Caxy vibrations are critical to the pairing, and that it should be possible to resolve two distinct superconducting gaps on the electron and hole Fermi surface pockets. PMID:26892805

  17. Superconductivity on the border of itinerant electron ferromagnetism in UGe{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Saxena, S.S.; Agarwal, P.; Ahilan, K.; Grosche, F.M.; Haselwimmer, R.K.W.; Steiner, M.J. E-mail: mjs57@cam.ac.uk; Pugh, E.; Walker, I.R.; Julian, S.R.; Monthoux, P.; Lonzarich, G.G.; Huxley, A.; Sheikin, I.; Braithweite, D.; Flouquet, J

    2001-05-01

    We report on the observation of a superconducting phase in the itinerant electron ferromagnet UGe{sub 2}. The superconductivity observed below 1 K and in a limited pressure range immediately below the critical pressure where ferromagnetism is abruptly suppressed, would seem to arise from the same electrons that produce band magnetism. This superconductivity is most naturally understood in terms of magnetic as opposed to lattice interactions and via a spin-triplet rather than a spin-singlet pairing normally associated with nearly anti-ferromagnetic metals.

  18. Co-existence of superconductivity and ferromagnetism in f-electron metals.

    Science.gov (United States)

    Huxley, Andrew

    2002-03-01

    In itinerant ferromagnets a strong spin polarisation might be expected to suppress any possibility of spin-singlet superconductivity. However spin triplet superconductivity may still occur if there is an appropriate pairing interaction and the material is sufficiently clean. The experimental evidence that a bulk superconducting state is indeed realised in two different f-electron ferromagnets will be reviewed, along with the special factors that might favour such a state. For UGe_2, samples that satisfy the clean limit condition are easily prepared. The superconducting transition temperature is however closely correlated with the proximity to a critical point for a magnetic transition within the ferromagnetic state, which is achieved only at high pressure. The same factors, perhaps related to Fermi surface nesting, which give rise to this complex magnetic behaviour, therefore appear to be implicated in the superconducting pairing. Superconductivity in ferromagnetic URhGe occurs at zero pressure, which has facilitated extensive magnetisation and heat-capacity studies. These confirm both the bulk nature of the two transitions and the co-existence of the two orders (ferromagnetism and superconductivity). Further, as expected for non s-wave pairing, it is found that only samples with a sufficiently low residual resistivity show superconductivity. In contrast to UGe_2, the magnetic state in URhGe behaves in accordance with the simplest version of the Moriya-Lonzarich theory. This, as well as the recent report that that the cubic itinerant ferromagnet ZrZn2 shows a low temperature transition, interpreted as an incomplete transition to superconductivity, suggest that superconductivity could occur more commonly in clean ferromagnets. The observed superconducting properties of UGe2 and URhGe appear to be consistent with a particular symmetry of the order parameter in these lower symmetry materials. Their lower symmetries also lead to several advantages relating to the

  19. 2011 Superconductivity Gordon Research Conference (June 5-10, 2011, Waterville Valley Resort, Waterville Valley, New Hampshire)

    Energy Technology Data Exchange (ETDEWEB)

    Prof. Ali Yazdani

    2011-06-10

    The 2011 Gordon Research Conference on Superconductivity will commemorate the 100th anniversary of the discovery of superconductivity by providing a forum for discussion of the latest experimental and theoretical advances in this field. The conference will bring together experts to address the current challenges in understanding correlated superconductors - from cuprates and pnictides to heavy fermion superconductors. The fundamental mechanisms of superconducting pairing, the underlying explanations for thermodynamic phase diagrams including potential importance of competing phases, the correspondence between these phenomena, and the transport and spectroscopic properties of these materials will be among the themes of the conference. We will also discuss the feasibility of using lessons learned from the study of known superconductors as a guide to the future discovery of novel and higher temperature superconductors. Speakers will be strongly encouraged to present new, unpublished work, which will ensure that discussions evoke and explore new research directions. The participation of young scientists at the graduate student or post-doctoral level will be encouraged by the offering of selected presentations, focused discussions with invited speakers, and poster sessions. In addition, the organizers have earmarked funds to facilitate attendance of members of groups underrepresented in science and engineering.

  20. Superconducting gap symmetry determined by the electron density

    Energy Technology Data Exchange (ETDEWEB)

    Perez, Luis A. [Instituto de Fisica, Universidad Nacional Autonoma de Mexico (UNAM), A.P. 20-364, C.P. 01000, Mexico D.F. (Mexico)]. E-mail: lperez@fisica.unam.mx; Millan, J. Samuel [Facultad de Ingenieria, UNACAR, C.P. 24180, Cd. del Carmen, Campeche, Mexico. (Mexico); Wang Chumin [Instituto de Investigaciones en Materiales, UNAM, A.P. 70-360, C.P. 04510, Mexico D.F. (Mexico)

    2006-05-01

    In this work, a comparative study of pairing and superconducting states in square lattices with s-, p- and d-symmetries is performed within the BCS formalism and a generalized Hubbard model, in which correlated-hopping interactions are considered in addition to the repulsive Coulomb interactions. The two-particle analysis reveals the importance of the van Hove singularity in the formation of pairs and then the two-particle states with different pairing symmetry have their maximum binding energies at the same hopping strength. This feature is confirmed by the superconducting critical temperature (T {sub c}) calculation at the low-density regime. However, a different picture is found for the high-density regime, i.e., the maxima of the s- and d-channel T {sub c} split from the expected value and no p-wave superconducting state is found. This study suggests that the three superconducting symmetries can be analyzed within a single framework.

  1. PREFACE: The International Conference on Superconductivity and Magnetism (ICSM2008) (Side, Turkey, 25-29 August 2008) The International Conference on Superconductivity and Magnetism (ICSM2008) (Side, Turkey, 25-29 August 2008)

    Science.gov (United States)

    Gencer, Ali; Grasso, Gianni

    2009-03-01

    The International Conference on Superconductivity and Magnetism (ICSM2008) was held at the congress centre of Ankara University in Side, Antalya, between 25-29 August 2008. The conference was the first conference on the combined fields of superconductivity and magnetism organized in Turkey at international level, and it had broad international participation from 42 countries, with registered delegates numbering over 400. A quarter of the attendees were research students. The conference attracted many of the best known leading scientists and experts in the field of superconductivity and magnetism from all over the world. The scientific program involved the presentation and discussion of 336 papers, classified as 65 invited, 81 oral and 190 posters. Submission of papers for the proceedings was on a volunteer basis and we therefore had nearly half of the presented papers, i.e. 30 submitted invited papers, peer-reviewed by Superconductor Science and Technology, and 85 submitted contributing papers, peer-reviewed by the organizers through processes administered by the Editorial Board and Scientific Committee. Reviews were conducted by expert referees at professional level and with the scientific standards expected of a proceedings journal issue published by IOP Publishing. The invited papers on superconductivity and magnetism with superconductivity were considered and processed for Superconductor Science and Technology by IOP itself. Although there are missing papers from some of the plenary speakers, we believe that this special issue of Superconductor Science and Technology (SUST) and the corresponding issue of Journal of Physics: Conference Series (JPCS) reflect most of the booming research in the fields of superconductivity and magnetism. We are very pleased to have worked with IOP on the conference proceedings, with special thanks to Dr Tom Miller and Dr Graham Douglas. Based on a refereed evaluation of all the papers and posters submitted, about 93 papers were

  2. Electrostatic electron-doping yields superconductivity in LaOBiS2

    Science.gov (United States)

    Uesugi, Eri; Nishiyama, Saki; Goto, Hidenori; Ota, Hiromi; Kubozono, Yoshihiro

    2016-12-01

    Electrostatic carrier-doping is attracting serious attention as a meaningful technique for producing interesting electronic states in two-dimensional (2D) layered materials. Ionic-liquid gating can provide the critical carrier density required to induce the metal-insulator transition and superconductivity. However, the physical properties of only a few materials have been controlled by the electrostatic carrier-doping during the past decade. Here, we report an observation of superconductivity in a 2D layered material, LaOBiS2, achieved by the electrostatic electron-doping. The electron doping of LaOBiS2 induced metallic conductivity in the normally insulating LaOBiS2, ultimately led to superconductivity. The superconducting transition temperature, Tc, was 3.6 K, higher than the 2.7 K seen in LaO1-xFxBiS2 with an electron-doped BiS2 layer. A rapid drop in resistance (R) was observed at low temperature, which disappeared with the application of high magnetic fields, implying a superconducting state. This study reveals that electron-doping is an important technique for inducing superconductivity in 2D layered BiS2 materials.

  3. The secondary electron emission coefficient of the material for the superconducting cavity input coupler

    CERN Document Server

    Kijima, Y; Furuya, T; Michizono, S I; Mitsunobu, S; Noer, R J

    2002-01-01

    The secondary electron emission (SEE) coefficients have been measured, for materials used in the coupler for KEKB superconducting cavities, i.e. Copper, Stainless steel plated with Copper, Niobium and Ceramic. We show that the electron bombardment is effective in decreasing the SEE coefficient of the metal surfaces, and the TiN coating and window fabrication processes influence the secondary electron yield. (author)

  4. 1st International Conference on Advancements of Medical Electronics

    CERN Document Server

    Bag, Sandip; Ganguly, Karabi; Sarkar, Indranath; Biswas, Papun

    2015-01-01

    The book is a collection of peer-reviewed scientific papers submitted by active researchers in the 1st International Conference on Advancements of Medical Electronics (ICAME2015). The conference is organized jointly by the Department of Biomedical Engineering and Electronics and Communication Engineering, JIS College of Engineering, West Bengal, India. The primary objective of the conference is to strengthen interdisciplinary research and its applications for the welfare of humanity. A galaxy of academicians, professionals, scientists, statesman and researchers from different parts of the country and abroad got together and shared their knowledge. The book presents research articles of medical image processing & analysis, biomedical instrumentation & measurements, DSP & clinical applications, embedded systems & its applications in healthcare. The book can be referred as a tool for further research.

  5. Noise Behaviour of a THz Superconducting Hot-Electron Bolometer Mixer

    Institute of Scientific and Technical Information of China (English)

    ZHANG Wen; S. I. Svechnikov; Yu. B. Vachtomin; S. V. Antipov; B. M. Voronov; G. N. Gol'tsman; LI Ning; JIANG Ling; MIAO Wei; LIN Zheng-Hui; YAO Qi-Jun; SHI Sheng-Cai; CHEN Jian; WU Pei-Heng

    2007-01-01

    A quasi-optical superconducting NbN hot-electron bolometer (HEB) mixer is measured in the frequency range of 0.5-2.5 THz for understanding of the frequency dependence of noise temperature of THz coherent detectors. It has been found that noise temperature increasing with frequency is mainly due to the coupling loss between the quasioptical planar antenna and the superconducting HEB bridge when taking account of non-uniform distribution of high-frequency current. With the coupling loss corrected, the superconducting HEB mixer demonstrates a noise temperature nearly independent of frequency.

  6. 2015 Applications in Electronics Pervading Industry, Environment and Society Conference

    CERN Document Server

    2017-01-01

    This book provides a thorough overview of cutting-edge research on electronics applications relevant to industry, the environment, and society at large. It covers a broad spectrum of application domains, from automotive to space and from health to security, while devoting special attention to the use of embedded devices and sensors for imaging, communication and control. The book is based on the 2015 ApplePies Conference, held in Rome, which brought together researchers and stakeholders to consider the most significant current trends in the field of applied electronics and to debate visions for the future. Areas addressed by the conference included information communication technology; biotechnology and biomedical imaging; space; secure, clean and efficient energy; the environment; and smart, green and integrated transport. As electronics technology continues to develop apace, constantly meeting previously unthinkable targets, further attention needs to be directed toward the electronics applications and the ...

  7. 2nd International Conference on Electric and Electronics (EEIC 2012)

    CERN Document Server

    Advances in Electric and Electronics

    2012-01-01

    This volume contains 108 full length papers presented at the 2nd International Conference on Electric and Electronics (EEIC 2012), held on April 21-22 in Sanya, China, which brings together researchers working in many different areas of education and learning to foster international collaborations and exchange of new ideas. This volume can be divided into two sections on the basis of the classification of manuscripts considered: the first section deals with Electric and the second section with Electronics.

  8. International Conference on Power Electronics and Renewable Energy Systems

    CERN Document Server

    Suresh, L; Dash, Subhransu; Panigrahi, Bijaya

    2015-01-01

    The book is a collection of high-quality peer-reviewed research papers presented in Proceedings of International Conference on Power Electronics and Renewable Energy Systems (ICPERES 2014) held at Rajalakshmi Engineering College, Chennai, India. These research papers provide the latest developments in the broad area of Power Electronics and Renewable Energy. The book discusses wide variety of industrial, engineering and scientific applications of the emerging techniques. It presents invited papers from the inventors/originators of new applications and advanced technologies.

  9. Superconductivity, Antiferromagnetism, and Kinetic Correlation in Strongly Correlated Electron Systems

    Directory of Open Access Journals (Sweden)

    Takashi Yanagisawa

    2015-01-01

    Full Text Available We investigate the ground state of two-dimensional Hubbard model on the basis of the variational Monte Carlo method. We use wave functions that include kinetic correlation and doublon-holon correlation beyond the Gutzwiller ansatz. It is still not clear whether the Hubbard model accounts for high-temperature superconductivity. The antiferromagnetic correlation plays a key role in the study of pairing mechanism because the superconductive phase exists usually close to the antiferromagnetic phase. We investigate the stability of the antiferromagnetic state when holes are doped as a function of the Coulomb repulsion U. We show that the antiferromagnetic correlation is suppressed as U is increased exceeding the bandwidth. High-temperature superconductivity is possible in this region with enhanced antiferromagnetic spin fluctuation and pairing interaction.

  10. A hidden pseudogap under the 'dome' of superconductivity in electron-doped high-temperature superconductors.

    Science.gov (United States)

    Alff, L; Krockenberger, Y; Welter, B; Schonecke, M; Gross, R; Manske, D; Naito, M

    2003-04-17

    The ground state of superconductors is characterized by the long-range order of condensed Cooper pairs: this is the only order present in conventional superconductors. The high-transition-temperature (high-T(c)) superconductors, in contrast, exhibit more complex phase behaviour, which might indicate the presence of other competing ground states. For example, the pseudogap--a suppression of the accessible electronic states at the Fermi level in the normal state of high-T(c) superconductors-has been interpreted as either a precursor to superconductivity or as tracer of a nearby ground state that can be separated from the superconducting state by a quantum critical point. Here we report the existence of a second order parameter hidden within the superconducting phase of the underdoped (electron-doped) high-T(c) superconductor Pr2-xCe(x)CuO4-y and the newly synthesized electron-doped material La2-xCe(x)CuO4-y (ref. 8). The existence of a pseudogap when superconductivity is suppressed excludes precursor superconductivity as its origin. Our observation is consistent with the presence of a (quantum) phase transition at T = 0, which may be a key to understanding high-T(c) superconductivity. This supports the picture that the physics of high-T(c) superconductors is determined by the interplay between competing and coexisting ground states.

  11. Percolated Superconductivity and Electron-Electron Exchange Mechanism in Ba-La-Cu-O

    Science.gov (United States)

    Tao, Ruibao

    It is found that the oxygen vacancies at the Cu-O basal plane of oxide (La1-xBax)2CuO4-y (Balacuo) will break the bonds of Cu-O-Cu to make the hopping between those coppers disappear so that the electrical conduction in the Cu-O basal plane would become a bond percolation system consisting of an infinite cluster carrying the current with a great number of finite clusters hanging around. It is favorable to create some mechanism of electron-electron exchange so that the transition temperature Tc of superconductivity could be increased significantly. The comparison with Y1Ba2Cu3O9-y is also discussed briefly.

  12. Proceedings of the fourth international conference and exhibition: World Congress on superconductivity. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Krishen, K.; Burnham, C. [eds.] [National Aeronautics and Space Administration, Houston, TX (United States). Lyndon B. Johnson Space Center

    1994-12-31

    The goals of the World Congress on Superconductivity (WCS) have been to establish and foster the development and commercial application of superconductivity technology on a global scale by providing a non-adversarial, non-advocacy forum where scientists, engineers, businessmen and government personnel can freely exchange information and ideas on recent developments and directions for the future of superconductive research. Sessions were held on: accelerator technology, power and energy, persistent magnetic fields, performance characterization, physical properties, fabrication methodology, superconductive magnetic energy storage (SMES), thin films, high temperature materials, device applications, wire fabrication, and granular superconductors. Individual papers are indexed separately.

  13. 8th international conference on electronic spectroscopy and structure

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, Art

    2000-10-16

    Gathering from 33 countries around the world, 408 registrants and a number of local drop-in participants descended on the Clark Kerr Campus of the University of California, Berkeley, from Monday, August 7 through Saturday, August 12, 2000 for the Eighth International Conference on Electronic Structure and Spectroscopy (ICESS8). At the conference, participants benefited from an extensive scientific program comprising more than 100 oral presentations (plenary lectures and invited and contributed talks) and 330 poster presentations, as well as ample time for socializing and a tour of the Advanced Light Source (ALS) at the nearby Lawrence Berkeley National Laboratory.

  14. Organic electronics: the endless frontier (Conference Presentation)

    Science.gov (United States)

    Kippelen, Bernard

    2016-10-01

    In this talk, we will discuss recent progress in a range of solid-state devices, including organic light-emitting diodes (OLEDs), organic field-effect transistors (OFETs), sensors, organic solar cells, and photodetectors. We will present strategies to modify and stabilize the electronic properties of interfaces that can yield devices with improved performance and longer lifetime. Examples of recent studies to reduce the environmental footprint of this emerging technology will be provided. We will show that these advances can lead to disruptive innovations to address some of the world's greatest challenges.

  15. Ultrafast electron diffraction with megahertz MeV electron pulses from a superconducting radio-frequency photoinjector

    Energy Technology Data Exchange (ETDEWEB)

    Feng, L. W.; Lin, L.; Huang, S. L.; Quan, S. W.; Hao, J. K.; Zhu, F.; Wang, F.; Liu, K. X., E-mail: kxliu@pku.edu.cn [Institute of Heavy Ion Physics and State Key Laboratory of Nuclear Physics and Technology, Peking University, Beijing 100871 (China); Jiang, T.; Zhu, P. F.; Fu, F.; Wang, R.; Zhao, L.; Xiang, D., E-mail: dxiang@sjtu.edu.cn [Key Laboratory for Laser Plasmas (Ministry of Education), Department of Physics and Astronomy, Shanghai Jiao Tong University, Shanghai 200240 (China); IFSA Collaborative Innovation Center, Shanghai Jiao Tong University, Shanghai 200240 (China)

    2015-11-30

    We report ultrafast relativistic electron diffraction operating at the megahertz repetition rate where the electron beam is produced in a superconducting radio-frequency (rf) photoinjector. We show that the beam quality is sufficiently high to provide clear diffraction patterns from gold and aluminium samples. With the number of electrons, several orders of magnitude higher than that from a normal conducting photocathode rf gun, such high repetition rate ultrafast MeV electron diffraction may open up many new opportunities in ultrafast science.

  16. Personal, Electronic, Secure National Library of Medicine Hosts Health Records Conference

    Science.gov (United States)

    ... care experts spoke at the conference, discussing how Electronic Health Records (EHRs) could be used to save money, improve ... national health-care system more efficient. Titled "Personal Electronic Health Records: From Biomedical Research to People's Health," the conference ...

  17. Conference on Refrigeration for Cryogenic Sensors and Electronic Systems

    CERN Document Server

    Sullivan, D B; McCarthy, S E; Cryogenic Refrigeration Conference; International Cryocooler Conference; Cryocoolers 1

    1981-01-01

    This proceedings documents the output of a meeting of refrigeration specialists held at the National Bureau of Standards, Boulder, CO, on October 6 and 7, 1980. Building on an earlier invitation-only meeting in 1977, the purpose of this first open meeting was to discuss progress in the development of refrigeration systems to cool cryogenic sensors and electronic systems in the temperature range below 20 K and with required cooling capacities below 10 W. The meeting was jointly sponsored by the International Institute of Refrigeration - Commission A1/2, the Office of Naval Research, the Naval Research Laboratory, the Cryogenic Engineering Conference, and the National Bureau of Standards. This first open cryocooler conference consisted of 23 papers presented by representatives of industry, government, and academia. The conference proceedings reproduced here was published by the National Bureau of Standards in Boulder, Colorado as NBS Special Publication #607. Subsequent meetings would become known as the Intern...

  18. 5th International Conference on Electronics, Communications and Networks

    CERN Document Server

    2016-01-01

    This book comprises peer-reviewed contributions presented at the 5th International Conference on Electronics, Communications and Networks (CECNet 2015), held in Shanghai, China, 12-15 December, 2015. It includes new multi-disciplinary topics spanning a unique depth and breadth of cutting-edge research areas in Electronic Engineering, Communications and Networks, and Computer Technology. More generally, it is of interest to academics, students and professionals involved in Consumer Electronics Technology, Communication Engineering and Technology, Wireless Communication Systems and Technology, and Computer Engineering and Technology.

  19. Towards highly stable polymer electronics (Conference Presentation)

    Science.gov (United States)

    Nikolka, Mark; Nasrallah, Iyad; Broch, Katharina; Sadhanala, Aditya; Hurhangee, Michael; McCulloch, Iain; Sirringhaus, Henning

    2016-11-01

    Due to their ease of processing, organic semiconductors are promising candidates for applications in high performance flexible displays and fast organic electronic circuitry. Recently, a lot of advances have been made on organic semiconductors exhibiting surprisingly high performance and carrier mobilities exceeding those of amorphous silicon. However, there remain significant concerns about their operational and environmental stability, particularly in the context of applications that require a very high level of threshold voltage stability, such as active-matrix addressing of organic light-emitting diode (OLED) displays. Here, we report a novel technique for dramatically improving the operational stress stability, performance and uniformity of high mobility polymer field-effect transistors by the addition of specific small molecule additives to the polymer semiconductor film. We demonstrate for the first time polymer FETs that exhibit stable threshold voltages with threshold voltage shifts of less than 1V when subjected to a constant current operational stress for 1 day under conditions that are representative for applications in OLED active matrix displays. The approach constitutes in our view a technological breakthrough; it also makes the device characteristics independent of the atmosphere in which it is operated, causes a significant reduction in contact resistance and significantly improves device uniformity. We will discuss in detail the microscopic mechanism by which the molecular additives lead to this significant improvement in device performance and stability.

  20. Electronic spectrum of the high-temperature superconducting state

    Science.gov (United States)

    Hwu, Y.; Lozzi, L.; Marsi, M.; La Rosa, S.; Winokur, M.; Davis, P.; Onellion, M.; Berger, H.; Gozzo, F.; Levy, F.

    1991-10-01

    Improved experimental conditions permitted an increase in the signal-to-noise ratio of the photoemission spectra for the superconducting state of Bi2Ca2SrCu2O8, taken with high angular and energy resolution. This also revealed a pronounced minimum that separates the two basic features of the spectrum, the narrow quasi-particle excitation peak and the controversial broad band at lower kinetic energies. The minimum is approximately 3-Delta below the Fermi level.

  1. Nonequilibrium interpretation of DC properties of NbN superconducting hot electron bolometers

    CERN Document Server

    Shcherbatenko, M; Lobanov, Yu; Maslennikov, S N; Kaurova, N; Finkel, M; Voronov, B; Goltsman, G; Klapwijk, T M

    2016-01-01

    We present a physically consistent interpretation of the dc electrical properties of niobiumnitride (NbN)-based superconducting hot-electron bolometer (HEB-) mixers, using concepts of nonequilibrium superconductivity. Through this we clarify what physical information can be extracted from the resistive transition and the dc current-voltage characteristics, measured at suitably chosen temperatures, and relevant for device characterization and optimization. We point out that the intrinsic spatial variation of the electronic properties of disordered superconductors, such as NbN, leads to a variation from device to device.

  2. Superconducting hot-electron nanobolometer with microwave bias and readout

    CERN Document Server

    Kuzmin, A A; Shitov, S V; Abramov, N N; Ermakov, A B; Arndt, M; Wuensch, S H; Ilin, K S; Ustinov, A V; Siegel, M

    2014-01-01

    We propose a new detection technique based on radio-frequency (RF) bias and readout of an antenna-coupled superconducting nanobolometer. This approach is suitable for Frequency-Division-Multiplexing (FDM) readout of large arrays using broadband low-noise RF amplifier. We call this new detector RFTES. This feasibility study was made on demonstrator devices which are made in all-Nb technology and operate at 4.2 K. The studied RFTES devices consist of an antenna-coupled superconducting nanobolometer made of ultrathin niobium films with transition temperature Tc = 5.2 K. The 0.65-THz antenna and nanobolometer are embedded as a load into a GHz-range coplanar niobium resonator (Tc = 8.9 K, Q = 4000). To heat the superconducting Nb nanobolometer close to the Tc, the RF power at resonator frequency f = 5.8 GHz is applied via a transmission line which is weakly coupled (-11 dB) to the loaded resonator. The THz-antenna of RFTES was placed in the focus of a sapphire immersion lens inside a He4-cryostat equipped with an ...

  3. First International Electronic Conference on Medicinal Chemistry (ECMC-1)

    Science.gov (United States)

    Mayence, Annie; Vanden Eynde, Jean Jacques

    2016-01-01

    The first International Electronic Conference on Medicinal Chemistry, organized and sponsored by MDPI AG, publisher, and the Journal Pharmaceuticals, took place in November 2015 on the SciForum website. More than 200 authors from 18 countries participated in the event and was attended by 25,000 visitors who had the opportunity to browse among 55 presentations, keynotes, and videos. A short description of some works presented during that scientific meeting is disclosed in this report.

  4. Fabrication of high-Tc superconducting hot electron bolometers for terahertz mixer applications

    Science.gov (United States)

    Villegier, Jean-Claude; Degardin, Annick F.; Guillet, Bruno; Houze, Frederic; Kreisler, Alain J.; Chaubet, Michel

    2005-03-01

    Superconducting Hot Electron Bolometer (HEB) mixers are a competitive alternative to Schottky diode mixers or other conventional superconducting receiver technologies in the terahertz frequency range because of their ultrawide bandwidth (from millimeter waves to the visible), high conversion gain, and low intrinsic noise level, even at 77 K. A new technological process has been developed to realize HEB mixers based on high temperature superconducting materials, using 15 to 40 nm thick layers of YBa2Cu3O7-δ (YBCO), sputtered on MgO (100) substrates by hollow cathode magnetron sputtering. Critical temperature values of YBCO films were found in the 85 to 91 K range. Sub-micron HEB bridges (0.8 μm x 0.8 μm) were obtained by combining electronic and UV lithography followed by selective etching techniques. Realization of YBCO HEB coupling to planar integrated gold antennas was also considered.

  5. Emergence of superconductivity in the canonical heavy-electron metal YbRh₂Si₂.

    Science.gov (United States)

    Schuberth, Erwin; Tippmann, Marc; Steinke, Lucia; Lausberg, Stefan; Steppke, Alexander; Brando, Manuel; Krellner, Cornelius; Geibel, Christoph; Yu, Rong; Si, Qimiao; Steglich, Frank

    2016-01-29

    The smooth disappearance of antiferromagnetic order in strongly correlated metals commonly furnishes the development of unconventional superconductivity. The canonical heavy-electron compound YbRh2Si2 seems to represent an apparent exception from this quantum critical paradigm in that it is not a superconductor at temperature T ≥ 10 millikelvin (mK). Here we report magnetic and calorimetric measurements on YbRh2Si2, down to temperatures as low as T ≈ 1 mK. The data reveal the development of nuclear antiferromagnetic order slightly above 2 mK and of heavy-electron superconductivity almost concomitantly with this order. Our results demonstrate that superconductivity in the vicinity of quantum criticality is a general phenomenon.

  6. In situ epitaxial MgB2 thin films for superconducting electronics.

    Science.gov (United States)

    Zeng, Xianghui; Pogrebnyakov, Alexej V; Kotcharov, Armen; Jones, James E; Xi, X X; Lysczek, Eric M; Redwing, Joan M; Xu, Shengyong; Li, Qi; Lettieri, James; Schlom, Darrell G; Tian, Wei; Pan, Xiaoqing; Liu, Zi-Kui

    2002-09-01

    The newly discovered 39-K superconductor MgB2 holds great promise for superconducting electronics. Like the conventional superconductor Nb, MgB2 is a phonon-mediated superconductor, with a relatively long coherence length. These properties make the prospect of fabricating reproducible uniform Josephson junctions, the fundamental element of superconducting circuits, much more favourable for MgB2 than for high-temperature superconductors. The higher transition temperature and larger energy gap of MgB2 promise higher operating temperatures and potentially higher speeds than Nb-based integrated circuits. However, success in MgB2 Josephson junctions has been limited because of the lack of an adequate thin-film technology. Because a superconducting integrated circuit uses a multilayer of superconducting, insulating and resistive films, an in situ process in which MgB2 is formed directly on the substrate is desirable. Here we show that this can be achieved by hybrid physical-chemical vapour deposition. The epitaxially grown MgB2 films show a high transition temperature and low resistivity, comparable to the best bulk samples, and their surfaces are smooth. This advance removes a major barrier for superconducting electronics using MgB2.

  7. Effects of Surface Electron Doping and Substrate on the Superconductivity of Epitaxial FeSe Films.

    Science.gov (United States)

    Zhang, W H; Liu, X; Wen, C H P; Peng, R; Tan, S Y; Xie, B P; Zhang, T; Feng, D L

    2016-03-09

    Superconductivity in FeSe is greatly enhanced in films grown on SrTiO3 substrates, although the mechanism behind remains unclear. Recently, surface potassium (K) doping has also proven able to enhance the superconductivity of FeSe. Here, by using scanning tunneling microscopy, we compare the K doping dependence of the superconductivity in FeSe films grown on two substrates: SrTiO3 (001) and graphitized SiC (0001). For thick films (20 unit cells (UC)), the optimized superconducting (SC) gaps are of similar size (∼9 meV) regardless of the substrate. However, when the thickness is reduced to a few UC, the optimized SC gap is increased up to ∼15 meV for films on SrTiO3, whereas it remains unchanged for films on SiC. This clearly indicates that the FeSe/SrTiO3 interface can further enhance the superconductivity, beyond merely doping electrons. Intriguingly, we found that this interface enhancement decays exponentially as the thickness increases, with a decay length of 2.4 UC, which is much shorter than the length scale for relaxation of the lattice strain, pointing to interfacial electron-phonon coupling as the likely origin.

  8. p-wave triggered superconductivity in single-layer graphene on an electron-doped oxide superconductor

    Science.gov (United States)

    di Bernardo, A.; Millo, O.; Barbone, M.; Alpern, H.; Kalcheim, Y.; Sassi, U.; Ott, A. K.; de Fazio, D.; Yoon, D.; Amado, M.; Ferrari, A. C.; Linder, J.; Robinson, J. W. A.

    2017-01-01

    Electron pairing in the vast majority of superconductors follows the Bardeen-Cooper-Schrieffer theory of superconductivity, which describes the condensation of electrons into pairs with antiparallel spins in a singlet state with an s-wave symmetry. Unconventional superconductivity was predicted in single-layer graphene (SLG), with the electrons pairing with a p-wave or chiral d-wave symmetry, depending on the position of the Fermi energy with respect to the Dirac point. By placing SLG on an electron-doped (non-chiral) d-wave superconductor and performing local scanning tunnelling microscopy and spectroscopy, here we show evidence for a p-wave triggered superconducting density of states in SLG. The realization of unconventional superconductivity in SLG offers an exciting new route for the development of p-wave superconductivity using two-dimensional materials with transition temperatures above 4.2 K.

  9. p-wave triggered superconductivity in single-layer graphene on an electron-doped oxide superconductor.

    Science.gov (United States)

    Di Bernardo, A; Millo, O; Barbone, M; Alpern, H; Kalcheim, Y; Sassi, U; Ott, A K; De Fazio, D; Yoon, D; Amado, M; Ferrari, A C; Linder, J; Robinson, J W A

    2017-01-19

    Electron pairing in the vast majority of superconductors follows the Bardeen-Cooper-Schrieffer theory of superconductivity, which describes the condensation of electrons into pairs with antiparallel spins in a singlet state with an s-wave symmetry. Unconventional superconductivity was predicted in single-layer graphene (SLG), with the electrons pairing with a p-wave or chiral d-wave symmetry, depending on the position of the Fermi energy with respect to the Dirac point. By placing SLG on an electron-doped (non-chiral) d-wave superconductor and performing local scanning tunnelling microscopy and spectroscopy, here we show evidence for a p-wave triggered superconducting density of states in SLG. The realization of unconventional superconductivity in SLG offers an exciting new route for the development of p-wave superconductivity using two-dimensional materials with transition temperatures above 4.2 K.

  10. Spin and Time-Reversal Symmetries of Superconducting Electron Pairs Probed by the Muon Spin Rotation and Relaxation Technique

    Science.gov (United States)

    Higemoto, Wataru; Aoki, Yuji; MacLaughlin, Douglas E.

    2016-09-01

    Unconventional superconductivity based on the strong correlation of electrons is one of the central issues of solid-state physics. Although many experimental techniques are appropriate for investigating unconventional superconductivity, a complete perspective has not been established yet. The symmetries of electron pairs are crucial properties for understanding the essential state of unconventional superconductivity. In this review, we discuss the investigation of the time-reversal and spin symmetries of superconducting electron pairs using the muon spin rotation and relaxation technique. By detecting a spontaneous magnetic field under zero field and/or the temperature dependence of the muon Knight shift in the superconducting phase, the time-reversal symmetry and spin parity of electron pairs have been determined for several unconventional superconductors.

  11. Study of decoherence in a system of superconducting flux-qubits interacting with an ensemble of electrons

    Energy Technology Data Exchange (ETDEWEB)

    Reboiro, M., E-mail: reboiro@fisica.unlp.edu.ar [IFLP, CONICET-Department of Physics, University of La Plata, c.c. 67 1900, La Plata (Argentina); Civitarese, O., E-mail: osvaldo.civitarese@fisica.unlp.edu.ar [IFLP, CONICET-Department of Physics, University of La Plata, c.c. 67 1900, La Plata (Argentina); Ramírez, R. [IFLP, CONICET-Department of Mathematics, University of La Plata (Argentina)

    2017-03-15

    The degree of coherence in a hybrid system composed of superconducting flux-qubits and an electron ensemble is analysed. Both, the interactions among the electrons and among the superconducting flux-qubits are taken into account. The time evolution of the hybrid system is solved exactly, and discussed in terms of the reduced density matrix of each subsystem. It is seen that the inclusion of a line width, for the electrons and for the superconducting flux-qubits, influences the pattern of spin-squeezing and the coherence of the superconducting flux qubits. - Highlights: • The degree of coherence in a hybrid system, composed of superconducting flux qubits and an electron ensemble, is analysed. • The time evolution of the hybrid system is solved exactly and discussed in terms of the reduced density matrix of each subsystem. • It is shown that the initial state of the system evolves to a stationary squeezed state.

  12. Concepts relating magnetic interactions, intertwined electronic orders, and strongly correlated superconductivity.

    Science.gov (United States)

    Davis, J C Séamus; Lee, Dung-Hai

    2013-10-29

    Unconventional superconductivity (SC) is said to occur when Cooper pair formation is dominated by repulsive electron-electron interactions, so that the symmetry of the pair wave function is other than an isotropic s-wave. The strong, on-site, repulsive electron-electron interactions that are the proximate cause of such SC are more typically drivers of commensurate magnetism. Indeed, it is the suppression of commensurate antiferromagnetism (AF) that usually allows this type of unconventional superconductivity to emerge. Importantly, however, intervening between these AF and SC phases, intertwined electronic ordered phases (IP) of an unexpected nature are frequently discovered. For this reason, it has been extremely difficult to distinguish the microscopic essence of the correlated superconductivity from the often spectacular phenomenology of the IPs. Here we introduce a model conceptual framework within which to understand the relationship between AF electron-electron interactions, IPs, and correlated SC. We demonstrate its effectiveness in simultaneously explaining the consequences of AF interactions for the copper-based, iron-based, and heavy-fermion superconductors, as well as for their quite distinct IPs.

  13. International Conference on NextGen Electronic Technologies

    CERN Document Server

    Thalmann, Nadia; Bhaaskaran, V

    2017-01-01

    This book is a collection of keynote lectures from international experts presented at International Conference on NextGen Electronic Technologies (ICNETS2-2016). ICNETS2 encompasses six symposia covering all aspects of electronics and communications domains, including relevant nano/micro materials and devices . This volume comprises of recent research in areas like computational signal processing analysis, intelligent embedded systems, nanoelectronic materials and devices, optical and microwave technologies, VLSI design: circuits systems and application, and wireless communication networks, and the internet of things. The contents of this book will be useful to researchers, professionals, and students working in the core areas of electronics and their applications, especially to signal processing, embedded systems, and networking.

  14. Suppressed superconductivity in substrate-supported β 12 borophene by tensile strain and electron doping

    Science.gov (United States)

    Cheng, Cai; Sun, Jia-Tao; Liu, Hang; Fu, Hui-Xia; Zhang, Jin; Chen, Xiang-Rong; Meng, Sheng

    2017-06-01

    Planar borophene, the truly 2D monolayer boron, has been independently successfully grown on Ag(1 1 1) by two groups (2016 Nat. Chem. 8 563 and 2015 Science 350 1513), which has received widespreading attentions. The superconducting property has not been unambiguously observed, which is unexpected because light element boron should have strong electron-phonon coupling. To resolve this puzzle, we show that the superconducting transition temperature T c of β 12 borophene is effectively suppressed by the substrate-induced tensile strain and electron doping via first principles calculations. The biaxial tensile strain of 2% induced by Ag(1 1 1) significantly reduces T c from 14 K to 2.95 K electron doping of 0.1 e- per boron atom further shrinks T c to 0.09 K. We also predict that the superconducting transition temperature in β 12 can be enhanced to 22.82 K with proper compressive strain (-1%) and 18.97 K with hole doping (0.1 h+ per boron). Further studies indicate that the variation of T c is closely related to the density of states of σ bands near the Fermi surface. Our results help to explain the challenges to experimentally probe superconductivity in substrate-supported borophene.

  15. Electronic behavior of superconducting SmFeAsO0.75

    Science.gov (United States)

    Sun, Y.; Ding, Y.; Zheng, B. C.; Shi, Z. X.; Ren, Z. A.

    2011-04-01

    High-quality polycrystalline SmFeAsO0.75 was synthesized with a superconducting transition width less than 1 K, and the electronic behavior was systematically studied by transport and specific heat measurements. An obvious superconducting jump was witnessed, together with a very small normalized superconducting jump, ΔC/γnTc ˜ 0.2, which is much smaller than expected from the BCS theory. A strong temperature-dependent Hall coefficient was found and attributed to the partial gapping of the Fermi surface up to the temperature of 160 K, which was predicted and supported by the emergence of the pseudogap. The charge-carrier density as well as the effective mass were also obtained and discussed in detail.

  16. Correlated trends of coexisting magnetism and superconductivity in optimally electron-doped oxypnictides.

    Science.gov (United States)

    Sanna, S; Carretta, P; Bonfà, P; Prando, G; Allodi, G; De Renzi, R; Shiroka, T; Lamura, G; Martinelli, A; Putti, M

    2011-11-25

    We report on the recovery of the short-range static magnetic order and on the concomitant degradation of the superconducting state in optimally F-doped SmFe(1-x)Ru(x)AsO(0.85)F(0.15) for 0.1≤x≲0.5. The two reduced order parameters coexist within nanometer-size domains in the FeAs layers and eventually disappear around a common critical threshold x(c)~0.6. Superconductivity and magnetism are shown to be closely related to two distinct well-defined local electronic environments of the FeAs layers. The two transition temperatures, controlled by the isoelectronic and diamagnetic Ru substitution, scale with the volume fraction of the corresponding environments. This fact indicates that superconductivity is assisted by magnetic fluctuations, which are frozen whenever a short-range static order appears, and totally vanish above the magnetic dilution threshold x(c).

  17. Magnet tests and status of the superconducting electron cyclotron resonance source SERSE

    Energy Technology Data Exchange (ETDEWEB)

    Ciavola, G.; Gammino, S.; Cafici, M.; Castro, M.; Chines, F.; Marletta, S. [INFN-Laboratorio Nazionale del Sud, Via S. Sofia 44, 95123 Catania (Italy); Alessandria, F. [INFN-LASA, Via F.lli Cervi 201, 20090 Segrate (Midway Islands) (Italy); Bourg, F.; Briand, P.; Melin, G.; Lagnier, R.; Seyfert, P. [CEA-Departement de Recherche Fondamentale sur la Matiere Condensee, Centre detudes Nucleaires de Grenoble, 38054 Grenoble Cedex 9 (France); Gaggero, G.; Losasso, M.; Penco, R. [ANSALDO-GIE, Via N. Lorenzi 8, 16152 Genova (Italy)

    1996-03-01

    At Laboratorio Nazionale del Sud a superconducting 14.5 GHz electron cyclotron resonance (ECR) source will be used as injector for the K-800 superconducting cyclotron. The original project of its magnetic system has been upgraded by taking into account the results of the high B mode operation of the 6.4 GHz SC-ECRIS at MSU-NSCL and now the mirror field may achieve 2.7 T, which is much higher than the confining field of any other ECR source. The magnet design will allow us to operate in a wide range of magnetic configurations making it easy to tune the source. The status of the project will be outlined and the preliminary results of the tests of the superconducting magnets will be described. A brief description of the tests to be carried out on the source during the first period of operation on the test bench in Grenoble follows. {copyright} {ital 1996 American Institute of Physics.}

  18. Space applications of superconducting microwave electronics at NASA Lewis Research Center

    Science.gov (United States)

    Leonard, R. F.; Bhasin, K. B.; Romanofsky, R. R.; Cubbage, C. D.; Chorey, C. Z.

    1993-01-01

    Since the discovery of high temperature superconductivity in 1987, NASA Lewis Research Center has been involved in efforts to demonstrate its advantages for applications involving microwave electronics in space, especially space communications. The program included thin film fabrication by means of laser ablation. Specific circuitry which was investigated includes microstrip ring resonators at 32 GHz, phase shifters which utilize a superconducting, optically activated switch, an 8x8 32 GHz superconducting microstrip antenna array, and an HTS-ring-resonator stabilized oscillator at 8 GHz. The latter two components are candidates for use in space experiments which are described in other papers. Experimental data on most of the circuits are presented as well as, in some cases, a comparison of their performance with an identical circuit utilizing gold or copper metallization.

  19. Digital base-band rf control system for the superconducting Darmstadt electron linear accelerator

    Directory of Open Access Journals (Sweden)

    M. Konrad

    2012-05-01

    Full Text Available The accelerating field in superconducting cavities has to be stabilized in amplitude and phase by a radio-frequency (rf control system. Because of their high loaded quality factor superconducting cavities are very susceptible for microphonics. To meet the increased requirements with respect to accuracy, availability, and diagnostics, the previous analog rf control system of the superconducting Darmstadt electron linear accelerator S-DALINAC has been replaced by a digital rf control system. The new hardware consists of two components: An rf module that converts the signal from the cavity down to the base-band and a field-programmable gate array board including a soft CPU that carries out the signal processing steps of the control algorithm. Different algorithms are used for normal-conducting and superconducting cavities. To improve the availability of the control system, techniques for automatic firmware and software deployment have been implemented. Extensive diagnostic features provide the operator with additional information. The architecture of the rf control system as well as the functionality of its components will be presented along with measurements that characterize the performance of the system, yielding, e.g., an amplitude stabilization down to (ΔA/A_{rms}=7×10^{-5} and a phase stabilization of (Δϕ_{rms}=0.8° for superconducting cavities.

  20. Microscopic annealing process and its impact on superconductivity in T'-structure electron-doped copper oxides.

    Science.gov (United States)

    Kang, Hye Jung; Dai, Pengcheng; Campbell, Branton J; Chupas, Peter J; Rosenkranz, Stephan; Lee, Peter L; Huang, Qingzhen; Li, Shiliang; Komiya, Seiki; Ando, Yoichi

    2007-03-01

    High-transition-temperature superconductivity arises in copper oxides when holes or electrons are doped into the CuO(2) planes of their insulating parent compounds. Whereas hole doping quickly induces metallic behaviour and superconductivity in many cuprates, electron doping alone is insufficient in materials such as R(2)CuO(4) (R is Nd, Pr, La, Ce and so on), where it is necessary to anneal an as-grown sample in a low-oxygen environment to remove a tiny amount of oxygen in order to induce superconductivity. Here we show that the microscopic process of oxygen reduction repairs Cu deficiencies in the as-grown materials and creates oxygen vacancies in the stoichiometric CuO(2) planes, effectively reducing disorder and providing itinerant carriers for superconductivity. The resolution of this long-standing materials issue suggests that the fundamental mechanism for superconductivity is the same for electron- and hole-doped copper oxides.

  1. Free-electron laser operation with a superconducting radio-frequency photoinjector at ELBE

    Energy Technology Data Exchange (ETDEWEB)

    Teichert, J., E-mail: j.teichert@hzdr.de [Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstr. 400, 01328 Dresden (Germany); Arnold, A.; Büttig, H.; Justus, M. [Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstr. 400, 01328 Dresden (Germany); Kamps, T. [Helmholtz-Zentrum Berlin, Albert-Einstein-Str. 15, 12489 Berlin (Germany); Lehnert, U. [Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstr. 400, 01328 Dresden (Germany); Lu, P. [Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstr. 400, 01328 Dresden (Germany); Technische Universität Dresden, 01062 Dresden (Germany); Michel, P.; Murcek, P. [Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstr. 400, 01328 Dresden (Germany); Rudolph, J. [Helmholtz-Zentrum Berlin, Albert-Einstein-Str. 15, 12489 Berlin (Germany); Schurig, R.; Seidel, W. [Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstr. 400, 01328 Dresden (Germany); Vennekate, H. [Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstr. 400, 01328 Dresden (Germany); Technische Universität Dresden, 01062 Dresden (Germany); Will, I. [Max-Born-Institut, Berlin, Max-Born-Str. 2a, 12489 Berlin (Germany); Xiang, R. [Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstr. 400, 01328 Dresden (Germany)

    2014-04-11

    At the radiation source ELBE a superconducting radio-frequency photoinjector (SRF gun) was developed and put into operation. Since 2010 the gun has delivered beam into the ELBE linac. A new driver laser with 13 MHz pulse repetition rate allows now to operate the free-electron lasers (FELs) with the SRF gun. This paper reports on the first lasing experiment with the far-infrared FEL at ELBE, describes the hardware, the electron beam parameters and the measurement of the FEL infrared radiation output. - Highlights: • The superconducting RF gun produces beam with Cs{sub 2}Te photocathodes. • The SRF gun operates as an injector for the ELBE linear accelerator. • First lasing of an infrared free-electron laser with an SRF gun.

  2. Design of a high-bunch-charge 112-MHz superconducting RF photoemission electron source

    Science.gov (United States)

    Xin, T.; Brutus, J. C.; Belomestnykh, Sergey A.; Ben-Zvi, I.; Boulware, C. H.; Grimm, T. L.; Hayes, T.; Litvinenko, Vladimir N.; Mernick, K.; Narayan, G.; Orfin, P.; Pinayev, I.; Rao, T.; Severino, F.; Skaritka, J.; Smith, K.; Than, R.; Tuozzolo, J.; Wang, E.; Xiao, B.; Xie, H.; Zaltsman, A.

    2016-09-01

    High-bunch-charge photoemission electron-sources operating in a continuous wave (CW) mode are required for many advanced applications of particle accelerators, such as electron coolers for hadron beams, electron-ion colliders, and free-electron lasers. Superconducting RF (SRF) has several advantages over other electron-gun technologies in CW mode as it offers higher acceleration rate and potentially can generate higher bunch charges and average beam currents. A 112 MHz SRF electron photoinjector (gun) was developed at Brookhaven National Laboratory to produce high-brightness and high-bunch-charge bunches for the coherent electron cooling proof-of-principle experiment. The gun utilizes a quarter-wave resonator geometry for assuring beam dynamics and uses high quantum efficiency multi-alkali photocathodes for generating electrons.

  3. Design of a High-bunch-charge 112-MHz Superconducting RF Photoemission Electron Source

    CERN Document Server

    Xin, T; Belomestnykh, Sergey A; Ben-Zvi, I; Boulware, C H; Grimm, T L; Hayes, T; Litvinenko, Vladimir N; Mernick, K; Narayan, G; Orfin, P; Pinayev, I; Rao, T; Severino, F; Skaritka, J; Smith, K; Than, R; Tuozzolo, J; Wang, E; Xiao, B; Xie, H; Zaltsman, A

    2016-01-01

    High-bunch-charge photoemission electron-sources operating in a continuous wave (CW) mode are required for many advanced applications of particle accelerators, such as electron coolers for hadron beams, electron-ion colliders, and free-electron lasers (FELs). Superconducting RF (SRF) has several advantages over other electron-gun technologies in CW mode as it offers higher acceleration rate and potentially can generate higher bunch charges and average beam currents. A 112 MHz SRF electron photoinjector (gun) was developed at Brookhaven National Laboratory (BNL) to produce high-brightness and high-bunch-charge bunches for the Coherent electron Cooling Proof-of-Principle (CeC PoP) experiment. The gun utilizes a quarter-wave resonator (QWR) geometry for assuring beam dynamics, and uses high quantum efficiency (QE) multi-alkali photocathodes for generating electrons.

  4. First International Conference on Electrical, Electronic and Communications Engineering

    CERN Document Server

    Vyas, Nalinaksh; Sanei, Saeid; Deb, Kalyanmoy

    2017-01-01

    The book reports on advanced theories and methods in two related engineering fields: electrical and electronic engineering, and communications engineering and computing. It highlights areas of global and growing importance, such as renewable energy, power systems, mobile communications, security and the Internet of Things (IoT). The contributions cover a number of current research issues, including smart grids, photovoltaic systems, wireless power transfer, signal processing, 4G and 5G technologies, IoT applications, mobile cloud computing and many more. Based on the proceedings of the first International Conference on Emerging Trends in Electrical, Electronic and Communications Engineering (ELECOM 2016), held in Voila Bagatelle, Mauritius from November 25 to 27, 2016, the book provides graduate students, researchers and professionals with a snapshot of the state-of-the-art and a source of new ideas for future research and collaborations.

  5. A scanning Auger electron spectrometer for internal surface analysis of Large Electron Positron 2 superconducting radio-frequency cavities

    Energy Technology Data Exchange (ETDEWEB)

    Benvenuti, C.; Cosso, R.; Genest, J.; Hauer, M.; Lacarrere, D.; Rijllart, A.; Saban, R. [CERN, 1211 Geneva 23 (Switzerland)

    1996-08-01

    A computer-controlled surface analysis instrument, incorporating static Auger electron spectroscopy, scanning Auger mapping, and secondary electron imaging, has been designed and built at CERN to study and characterize the inner surface of superconducting radio-frequency cavities to be installed in the Large Electron Positron collider. A detailed description of the instrument, including the analytical head, the control system, and the vacuum system is presented. Some recent results obtained from the cavities provide examples of the instrument{close_quote}s capabilities. {copyright} {ital 1996 American Institute of Physics.}

  6. DISCOURSE AND PARTICIPATION IN ESL FACE-TO-FACE AND WRITTEN ELECTRONIC CONFERENCES

    Directory of Open Access Journals (Sweden)

    Michael Fitze

    2006-01-01

    Full Text Available This study was a comparative investigation of face-to-face and written electronic conferences. The participants were advanced English as a second language (hereafter: ESL students. The two types of conferences were compared in terms of textual features and participation. There was no statistically significant difference in the total number of words that students produced in an equivalent amount of time in the two types of conferences. The discourse in written electronic conferences displayed greater lexical range, and students in these conferences produced more discourse demonstrating interactive competence. The statistically significant finding of increased lexical range in written electronic conferences persisted even when the interactive discourse was eliminated from the conference transcripts and the transcripts were reanalyzed. This finding suggests that, during written electronic conferences, students were better able to use and practice a wider range of vocabulary related to the topics. For one of the groups, participation in written electronic conferences was more balanced among students, while for the other group participation was about equally balanced regardless of the conference setting. This last finding came as a surprise and points to a need for further research into variables that might mediate balanced participation in face-to-face and written electronic conferences.

  7. Electronic structure and superconductivity of multi-layered organic charge transfer salts

    Energy Technology Data Exchange (ETDEWEB)

    Jeschke, Harald O.; Altmeyer, Michaela; Guterding, Daniel; Valenti, Roser [Institut fuer Theoretische Physik, Goethe-Universitaet Frankfurt, 60438 Frankfurt (Germany)

    2015-07-01

    We examine the electronic properties of polymorphs of (BEDT-TTF){sub 2}Ag(CF{sub 3}){sub 4}(TCE) (1,1,2-trichloroethane) within density functional theory (DFT). While a phase with low superconducting transition temperature T{sub c}=2.6 K exhibits a κ packing motif, two high T{sub c} phases are layered structures consisting of α{sup '} and κ packed layers. We determine the electronic structures and discuss the influence of the insulating α{sup '} layer on the conducting κ layer. In the κ-α{sub 1}{sup '} dual-layered compound, we find that the stripes of high and low charge in the α{sup '} layer correspond to a stripe pattern of hopping parameters in the κ layer. Based on the different underlying Hamiltonians, we study the superconducting properties and try to explain the differences in T{sub c}.

  8. Hybrid quantum circuit with a superconducting qubit coupled to an electron spin ensemble

    Energy Technology Data Exchange (ETDEWEB)

    Kubo, Yuimaru; Grezes, Cecile; Vion, Denis; Esteve, Daniel; Bertet, Patrice [Quantronics Group, SPEC (CNRS URA 2464), CEA-Saclay, 91191 Gif-sur-Yvette (France); Diniz, Igor; Auffeves, Alexia [Institut Neel, CNRS, BP 166, 38042 Grenoble (France); Isoya, Jun-ichi [Research Center for Knowledge Communities, University of Tsukuba, 305-8550 Tsukuba (Japan); Jacques, Vincent; Dreau, Anais; Roch, Jean-Francois [LPQM (CNRS, UMR 8537), Ecole Normale Superieure de Cachan, 94235 Cachan (France)

    2013-07-01

    We report the experimental realization of a hybrid quantum circuit combining a superconducting qubit and an ensemble of electronic spins. The qubit, of the transmon type, is coherently coupled to the spin ensemble consisting of nitrogen-vacancy (NV) centers in a diamond crystal via a frequency-tunable superconducting resonator acting as a quantum bus. Using this circuit, we prepare arbitrary superpositions of the qubit states that we store into collective excitations of the spin ensemble and retrieve back into the qubit. We also report a new method for detecting the magnetic resonance of electronic spins at low temperature with a qubit using the hybrid quantum circuit, as well as our recent progress on spin echo experiments.

  9. The superconducting phase and electronic excitations of (Rb,Cs) Fe 2 As 2

    Science.gov (United States)

    Kanter, J.; Shermadini, Z.; Khasanov, R.; Amato, A.; Bukowski, Z.; Batlogg, B.

    2011-03-01

    We present specific heat, transport and Muon-Spin Rotation (μ SR) results on (Rb,Cs) Fe 2 As 2 . RbFe 2 As 2 was only recently found to be superconducting below 2.6 K by Bukowski et al. Compared to the related BaFe 2 As 2 the electron density is lower and no magnetic order is observed. For the superconducting phase the superfluid density was calculated from μ SR data. The temperature dependence of the superfluid density and the magnetic penetration depth is well described by a multi-gap scenario. In addition the electronic contribution the specific heat was studied for different compositions and magnetic fields and reveals a high value for the Sommerfeld coefficient γ .

  10. Electronic structure and superconductivity of hcp-bcc binary systems based on titanium and rhenium

    Energy Technology Data Exchange (ETDEWEB)

    Prekul, A.F.; Volkenshtein, N.V.

    1978-12-01

    The similarity of hcp--bcc binary systems of transition metals of groups IV--V and VI--VII is shown on the basis of a joint analysis of the kinetic, superconducting, and structural properties. Under the assumption that there is a singularity (a pseudo-gap) in the electronic structure of hardened alloys, a model is proposed for the change in the critical temperature of superconductivity with alloy concentration. According to the model, the two peaks in the functions T/sub c/(x) are due to the partial dielectrization of the electron spectrum and do not belong to the equilibrium solid solutions based on the initial metals, as had earlier been assumed.

  11. Transport properties of a superconducting single-electron transistor coupled to a nanomechanical oscillator

    Science.gov (United States)

    Koerting, V.; Schmidt, T. L.; Doiron, C. B.; Trauzettel, B.; Bruder, C.

    2009-04-01

    We investigate a superconducting single-electron transistor capacitively coupled to a nanomechanical oscillator and focus on the double Josephson quasiparticle resonance. The existence of two coherent Cooper-pair tunneling events is shown to lead to pronounced back action effects. Measuring the current and the shot noise provides a direct way of gaining information on the state of the oscillator. In addition to an analytical discussion of the linear-response regime, we discuss and compare results of higher-order approximation schemes and a fully numerical solution. We find that cooling of the mechanical resonator is possible and that there are driven and bistable oscillator states at low couplings. Finally, we also discuss the frequency dependence of the charge noise and the current noise of the superconducting single electron transistor.

  12. Low-temperature transmission electron microscopy study of superconducting Nb{sub 3}Sn

    Energy Technology Data Exchange (ETDEWEB)

    Schierning, G.; Theissmann, R. [Faculty of Engineering and CeNIDE, University of Duisburg-Essen, Bismarckstr. 81, 47057 Duisburg (Germany); Acet, M. [Experimentalphysik and CeNIDE, University of Duisburg-Essen, Lotharstr. 1, 47057 Duisburg (Germany); Hoelzel, M. [Fachbereich Materialwissenschaften, Technical University of Darmstadt, Petersenstr. 23, 64287 Darmstadt (Germany); FRM-II, Technical University of Munich, 85747 Garching (Germany); Gruendmayer, J.; Zweck, J. [Physics Faculty, University of Regensburg, 93047 Regensburg (Germany)

    2010-08-15

    By low-temperature transmission electron microscopy we have found nanodomains in a polycrystalline Nb{sub 3}Sn sample. We interpret that these nanodomains form due to a tetragonal distortion. Because twinning seems to be a prominent feature of the real structure of many high T{sub c} superconductors, possible interactions between a twinned structure and superconductivity are briefly discussed. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  13. Structural, electronic, superconducting and mechanical properties of ReC and TcC

    Energy Technology Data Exchange (ETDEWEB)

    Kavitha, M.; Priyanga, G. Sudha; Rajeswarapalanichamy, R., E-mail: rajeswarapalanichamy@gmail.com; Santhosh, M. [Department of Physics, N.M.S.S.V.N College, Madurai, Tamilnadu-625019 (India)

    2015-06-24

    The structural, electronic, superconducting and mechanical properties of ReC and TcC are investigated using density functional theory calculations. The lattice constants, bulk modulus, and the density of states are obtained. The calculated lattice parameters are in good agreement with the available results. The density of states reveals that ReC and TcC exhibit metallic behavior at ambient condition. A pressure-induced structural phase transition is observed in both materials.

  14. Structural, electronic, superconducting and mechanical properties of ReC and TcC

    Science.gov (United States)

    Kavitha, M.; Priyanga, G. Sudha; Rajeswarapalanichamy, R.; Santhosh, M.

    2015-06-01

    The structural, electronic, superconducting and mechanical properties of ReC and TcC are investigated using density functional theory calculations. The lattice constants, bulk modulus, and the density of states are obtained. The calculated lattice parameters are in good agreement with the available results. The density of states reveals that ReC and TcC exhibit metallic behavior at ambient condition. A pressure-induced structural phase transition is observed in both materials.

  15. Chemically gated electronic structure of a superconducting doped topological insulator system

    Science.gov (United States)

    Wray, L. A.; Xu, S.; Neupane, M.; Fedorov, A. V.; Hor, Y. S.; Cava, R. J.; Hasan, M. Z.

    2013-07-01

    Angle resolved photoemission spectroscopy is used to observe changes in the electronic structure of bulk-doped topological insulator CuxBi2Se3 as additional copper atoms are deposited onto the cleaved crystal surface. Carrier density and surface-normal electrical field strength near the crystal surface are estimated to consider the effect of chemical surface gating on atypical superconducting properties associated with topological insulator order, such as the dynamics of theoretically predicted Majorana Fermion vortices.

  16. Spin-liquid polymorphism in a correlated electron system on the threshold of superconductivity.

    Science.gov (United States)

    Zaliznyak, Igor; Savici, Andrei T; Lumsden, Mark; Tsvelik, Alexei; Hu, Rongwei; Petrovic, Cedomir

    2015-08-18

    We report neutron scattering measurements which reveal spin-liquid polymorphism in an "11" iron chalcogenide superconductor. It occurs when a poorly metallic magnetic state of FeTe is tuned toward superconductivity by substitution of a small amount of tellurium with isoelectronic sulfur. We observe a liquid-like magnetic response, which is described by the coexistence of two disordered magnetic phases with different local structures whose relative abundance depends on temperature. One is the ferromagnetic (FM) plaquette phase observed in undoped, nonsuperconducting FeTe, which preserves the C4 symmetry of the underlying square lattice and is favored at high temperatures, whereas the other is the antiferromagnetic plaquette phase with broken C4 symmetry, which emerges with doping and is predominant at low temperatures. These findings suggest the coexistence of and competition between two distinct liquid states, and a liquid-liquid phase transformation between these states, in the electronic spin system of FeTe(1-x)(S,Se)(x). We have thus discovered the remarkable physics of competing spin-liquid polymorphs in a correlated electron system approaching superconductivity. Our results facilitate an understanding of large swaths of recent experimental data in unconventional superconductors. In particular, the phase with lower C2 local symmetry, whose emergence precedes superconductivity, naturally accounts for a propensity for forming electronic nematic states which have been observed experimentally, in cuprate and iron-based superconductors alike.

  17. EDITORIAL: Electron Microscopy and Analysis Group Conference 2011 (EMAG 2011)

    Science.gov (United States)

    Moebus, Guenter; Walther, Thomas; Brydson, Rik; Ozkaya, Dogan; MacLaren, Ian; Donnelly, Steve; Nellist, Pete; Li, Ziyou; Baker, Richard; Chiu, YuLung

    2012-07-01

    The biennial EMAG conference has established a strong reputation as a key event for the national and international electron microscopy community. In 2011 the meeting was held at The University of Birmingham, and I must first take this opportunity of thanking Birmingham for hosting the conference and for the excellent support we received from the local organisers. As a committee, we are delighted to see that enthusiasm for the EMAG conference series continues to be strong. We received more than 160 submitted abstracts, and 157 delegates attended the meeting. The scientific programme organiser, Ian MacLaren, put together an exciting programme. Plenary lectures were presented by Professor Knut Urban, Dr Frances Ross and Dr Richard Henderson. There were a further 10 invited speakers, from the UK, Continental Europe, Australia, the USA and Japan. The quality of the contributed oral and poster presentations was also very high. EMAG is keen to encourage student participation, and a winner and two runners-up were presented with prizes for the best oral and poster presentations from a student. I am always struck by the scientific quality of the oral and poster contributions and the vibrant discussions that occur both in the formal sessions and in the exhibition space at EMAG. I am convinced that a crucial part of maintaining that scientific quality is the opportunity that is offered of having a paper fully reviewed by two internationally selected referees and published in the Journal of Physics: Conference Series. For many students, this is the first fully reviewed paper they publish. I hope that you, like me, will be struck by the scientific quality of the 87 papers that follow, and that you will find them interesting and informative. Finally I must thank the platinum sponsors for their support of the meeting. These were Gatan, Zeiss, FEI, JEOL and Hitachi. I must also thank the European Microscopy Society for their generous sponsorship and support for the travel costs of

  18. The Emerging Infections Network electronic mail conference and web page.

    Science.gov (United States)

    Strausbaugh, L J; Liedtke, L A

    2001-01-15

    In February 1997, the Emerging Infections Network (EIN) established an electronic mail conference to facilitate discussions about emerging infectious diseases and related topics among its members and public health officials. Later that year, the EIN opened its section of the Infectious Diseases Society of America's home page. The EIN Web page was developed to give its members an alternative route for responding to EIN surveys and to facilitate rapid dispersal of EIN reports. The unrestricted portion of the site allows visitors access to information about the EIN and to published EIN reports on specific topics. For the most part, these are brief summaries or abstracts. In the restricted, password-protected portion of the EIN site, members can access the detailed, original reports from EIN queries and the comprehensive listings of member observations. Search functions in both portions of the EIN site enhance the retrieval of reports and observations on specific topics.

  19. Control of the competition between a magnetic phase and a superconducting phase in cobalt-doped and nickel-doped NaFeAs using electron count.

    Science.gov (United States)

    Parker, Dinah R; Smith, Matthew J P; Lancaster, Tom; Steele, Andrew J; Franke, Isabel; Baker, Peter J; Pratt, Francis L; Pitcher, Michael J; Blundell, Stephen J; Clarke, Simon J

    2010-02-05

    Using a combination of neutron, muon, and synchrotron techniques we show how the magnetic state in NaFeAs can be tuned into superconductivity by replacing Fe by either Co or Ni. The electron count is the dominant factor, since Ni doping has double the effect of Co doping for the same doping level. We follow the structural, magnetic, and superconducting properties as a function of doping to show how the superconducting state evolves, concluding that the addition of 0.1 electrons per Fe atom is sufficient to traverse the superconducting domain, and that magnetic order coexists with superconductivity at doping levels less than 0.025 electrons per Fe atom.

  20. Kinetic Energy Driven Superconductivity in the Electron Doped Cobaltate NaxCoO2 · yH2O

    Institute of Scientific and Technical Information of China (English)

    LIU Bin; LIANG Ying; FENG Shi-Ping; CHEN Wei-Yeu

    2005-01-01

    Within the charge-spin separation fermion-spin theory, we show that the mechanism of superconductivity in the electron doped cobaltate Nax CoO2. yH2 O is ascribed to its kinetic energy. The dressed fermions interact occurring directly through the kinetic energy by exchanging magnetic excitations. This interaction leads to a net attractive force between dressed fermions, then the electron Cooper pairs originating from the dressed fermion pairing state are due to the charge-spin recombination, and their condensation reveals the superconducting ground state. The superconducting transition temperature is identical to the dressed fermion pair transition temperature, and is suppressed to a lower temperature due to the strong magnetic frustration. The optimal superconducting transition temperature occurs in the electron doping concentration δ≈ 0.29, and then decreases for both underdoped and overdoped regimes, in qualitative agreement with the experimental results.

  1. Superconducting Electronics Research at CSIRO Australia——20 Years after Discovery of HTS

    Institute of Scientific and Technical Information of China (English)

    Jia Du; Cathy P. Foley; Keith L. Leslie

    2008-01-01

    CSIRO has had a long-term research effort in superconductivity, in particular, since the discovery of HTS which promised big prospects. Significant progress has been made in research and development of HTS electronic devices and systems for practical applications such as mineral and exploration as well as some niche applications in emerging science and technology areas. This article presents an overview of the CSIRO research activities in HTS supercon- ducting electronics since 1987, outlining the HTS junction and device technology as well as various application systems developed by the group.

  2. Enhanced superconductivity accompanying a Lifshitz transition in electron-doped FeSe monolayer

    Science.gov (United States)

    Shi, X.; Han, Z.-Q.; Peng, X.-L.; Richard, P.; Qian, T.; Wu, X.-X.; Qiu, M.-W.; Wang, S. C.; Hu, J. P.; Sun, Y.-J.; Ding, H.

    2017-04-01

    The origin of enhanced superconductivity over 50 K in the recently discovered FeSe monolayer films grown on SrTiO3 (STO), as compared to 8 K in bulk FeSe, is intensely debated. As with the ferrochalcogenides AxFe2-ySe2 and potassium-doped FeSe, which also have a relatively high-superconducting critical temperature (Tc), the Fermi surface (FS) of the FeSe/STO monolayer films is free of hole-like FS, suggesting that a Lifshitz transition by which these hole FSs vanish may help increasing Tc. However, the fundamental reasons explaining this increase of Tc remain unclear. Here we report a 15 K jump of Tc accompanying a second Lifshitz transition characterized by the emergence of an electron pocket at the Brillouin zone centre, which is triggered by high-electron doping following in situ deposition of potassium on FeSe/STO monolayer films. Our results suggest that the pairing interactions are orbital dependent in generating enhanced superconductivity in FeSe.

  3. High-temperature superconductivity for avionic electronic warfare and radar systems

    Energy Technology Data Exchange (ETDEWEB)

    Ryan, P.A. [Wright Lab., Wright-Patterson AFB, OH (United States). Avionics Directorate

    1994-12-31

    The electronic warfare (EW) and radar communities expect to be major beneficiaries of the performance advantages high-temperature superconductivity (HTS) has to offer over conventional technology. Near term upgrades to system hardware can be envisioned using extremely small, high Q, microwave filters and resonators; compact, wideband, low loss, microwave delay and transmission lines; as well as, wideband, low loss, monolithic microwave integrated circuit phase shifters. The most dramatic impact will be in the far term, using HTS to develop new, real time threat identification and response strategy receiver/processing systems designed to utilize the unique high frequency properties of microwave and ultimately digital HTS. To make superconductivity practical for operational systems, however, technological obstacles need to be overcome. Compact cryogenically cooled subsystems with exceptional performance able to withstand rugged operational environments for long periods of time need to be developed.

  4. Unconventional superconductivity in electron-doped layered metal nitride halides MNX (M = Ti, Zr, Hf; X = Cl, Br, I)

    Energy Technology Data Exchange (ETDEWEB)

    Kasahara, Yuichi, E-mail: ykasahara@scphys.kyoto-u.ac.jp [Department of Physics, Kyoto University, Kyoto 606-8502 (Japan); Kuroki, Kazuhiko, E-mail: kuroki@phys.sci.osaka-u.ac.jp [Department of Physics, Osaka University, Toyonaka, Osaka 560-0043 (Japan); Yamanaka, Shoji, E-mail: syamana@hiroshima-u.ac.jp [Department of Applied Chemistry, Graduate School of Engineering, Hiroshima University, Higashi-Hiroshima, Hiroshima 739-8527 (Japan); Taguchi, Yasujiro, E-mail: y-taguchi@riken.jp [RIKEN Center for Emergent Matter Science (CEMS), Wako 351-0198 (Japan)

    2015-07-15

    In this review, we present a comprehensive overview of superconductivity in electron-doped metal nitride halides MNX (M = Ti, Zr, Hf; X = Cl, Br, I) with layered crystal structure and two-dimensional electronic states. The parent compounds are band insulators with no discernible long-range ordered state. Upon doping tiny amount of electrons, superconductivity emerges with several anomalous features beyond the conventional electron–phonon mechanism, which stimulate theoretical investigations. We will discuss experimental and theoretical results reported thus far and compare the electron-doped layered nitride superconductors with other superconductors.

  5. Characterization of MgB2 Superconducting Hot Electron Bolometers

    Science.gov (United States)

    Cunnane, D.; Kawamura, J. H.; Wolak, M. A.; Acharya, N.; Tan, T.; Xi, X. X.; Karasik, B. S.

    2014-01-01

    Hot-Electron Bolometer (HEB) mixers have proven to be the best tool for high-resolution spectroscopy at the Terahertz frequencies. However, the current state of the art NbN mixers suffer from a small intermediate frequency (IF) bandwidth as well as a low operating temperature. MgB2 is a promising material for HEB mixer technology in view of its high critical temperature and fast thermal relaxation allowing for a large IF bandwidth. In this work, we have fabricated and characterized thin-film (approximately 15 nanometers) MgB2-based spiral antenna-coupled HEB mixers on SiC substrate. We achieved the IF bandwidth greater than 8 gigahertz at 25 degrees Kelvin and the device noise temperature less than 4000 degrees Kelvin at 9 degrees Kelvin using a 600 gigahertz source. Using temperature dependencies of the radiation power dissipated in the device we have identified the optical loss in the integrated microantenna responsible as a cause of the limited sensitivity of the current mixer devices. From the analysis of the current-voltage (IV) characteristics, we have derived the effective thermal conductance of the mixer device and estimated the required local oscillator power in an optimized device to be approximately 1 microwatts.

  6. Localized electronic states and the superconducting gap in Bi 2Sr 2CaCu 2O 8+y

    Science.gov (United States)

    Quitmann, C.; Ma, Jian; Kelley, R. J.; Margaritondo, G.; Onellion, M.

    1994-12-01

    Angle-resolved photoemission data taken on some Bi 2Sr 2CaCu 2O 8+y single crystals exhibit the formation of a superconducting gap in the absence of a quasiparticle normal state band. We observe the opening of the superconducting gap in the same regions of the Brillouin zone for which it is observed for samples that do exhibit a quasiparticle normal state. The absence of a dispersing quasiparticle normal state indicates that the normal state electronic states in these samples are almost localized in real space. Our data suggest that two types of carriers can coexist, and contribute to forming a superconducting gap, in these materials.

  7. Study on the electronic structures of REBaCuO superconductors and their relation to superconductivity

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Electronic structures of REBaCuO(RE=La, Pr, Nd, Sm, Gd, Dy, Ho and Er)systems were calculated by means of SCF-Xα -SW methods. Results show that there is an inner-orbit coupling for these oxide superconductor systems. The inner-orbit coupling was resulted from the interaction of two electronic orbits of RE 5p and O 2s, since they have similar energy state levels and relatively larger orbital electronic clouds. Compared with experimental facts, it is also found that the overlap in space between the two orbits has a similar tendency to Tc and the number of enrolling electrons has a close relation to Jc, therefore, the influence of inner-orbit coupling on superconductivity could not be overlooked.

  8. JAERI superconducting RF linac-based free-electron laser-facility

    CERN Document Server

    Minehara, E J; Nagai, R; Kikuzawa, N; Sugimoto, M; Hajima, R; Shizuma, T; Yamauchi, T; Nishimori, N

    2000-01-01

    Recently, the JAERI superconducting RF linac based FEL has been successfully lased to produce 0.36 kW of FEL light using a 100 kW electron beam in quasi-continuous wave operation. A 1 kW class laser is our present program goal, and will be achieved by improving the optical out coupling in the FEL optical resonator, the electron gun, and the electron beam optics in the JAERI FEL driver. Our next 5-year program goal is to produce a 100 kW-class FEL laser and multi-MW class electron beam in average, quasi-continuous wave operation. Conceptual and engineering design options needed for such a very high-power operation will be discussed to improve and to upgrade the existing facility.

  9. Ultrafast quenching of electron-boson interaction and superconducting gap in a cuprate superconductor.

    Science.gov (United States)

    Zhang, Wentao; Hwang, Choongyu; Smallwood, Christopher L; Miller, Tristan L; Affeldt, Gregory; Kurashima, Koshi; Jozwiak, Chris; Eisaki, Hiroshi; Adachi, Tadashi; Koike, Yoji; Lee, Dung-Hai; Lanzara, Alessandra

    2014-01-01

    Ultrafast spectroscopy is an emerging technique with great promise in the study of quantum materials, as it makes it possible to track similarities and correlations that are not evident near equilibrium. Thus far, however, the way in which these processes modify the electron self-energy--a fundamental quantity describing many-body interactions in a material--has been little discussed. Here we use time- and angle-resolved photoemission to directly measure the ultrafast response of self-energy to near-infrared photoexcitation in high-temperature cuprate superconductor. Below the critical temperature of the superconductor, ultrafast excitations trigger a synchronous decrease of electron self-energy and superconducting gap, culminating in a saturation in the weakening of electron-boson coupling when the superconducting gap is fully quenched. In contrast, electron-boson coupling is unresponsive to ultrafast excitations above the critical temperature of the superconductor and in the metallic state of a related material. These findings open a new pathway for studying transient self-energy and correlation effects in solids.

  10. Production of highly charged heavy ions by 18 GHz superconducting electron cyclotron resonance at Research Center for Nuclear Physics.

    Science.gov (United States)

    Yorita, Tetsuhiko; Hatanaka, Kichiji; Fukuda, Mitsuhiro; Kibayashi, Mitsuru; Morinobu, Shunpei; Okamura, Hiroyuki; Tamii, Atsushi

    2010-02-01

    An 18 GHz superconducting electron cyclotron resonance ion source has been installed as a subject of the azimuthally varying field cyclotron upgrade project (K. Hatanaka et al., in Proceedings of the 17th International Conference on Cyclotrons and Their Applications, Tokyo, Japan, 18-22 October 2004, pp. 115-117), in order to increase beam currents and to extend the variety of ions. The production development of several ions has been performed since 2006 and some of them have already been used for user experiments [T. Yorita et al., Rev. Sci. Instrum. 79, 02A311 (2008)]. Further optimizations for each component such as the material of plasma electrode, material, and shape of bias probe and mirror field have been continued and more intense ion beams have been obtained for O, N, and Ar. For the purpose of obtaining highly charged Xe with several microamperes, the optimization of position and shape of plasma electrode and bias disk has also been done and highly charged Xe(32+) beam has been obtained successfully.

  11. First results of 28 GHz superconducting electron cyclotron resonance ion source for KBSI accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jin Yong; Lee, Byoung-Seob; Choi, Seyong; Kim, Seong Jun; Ok, Jung-Woo; Yoon, Jang-Hee; Kim, Hyun Gyu; Shin, Chang Seouk; Hong, Jonggi; Bahng, Jungbae; Won, Mi-Sook, E-mail: mswon@kbsi.re.kr [Busan Center, Korea Basic Science Institute, Busan 609-735 (Korea, Republic of)

    2016-02-15

    The 28 GHz superconducting electron cyclotron resonance (ECR) ion source has been developed to produce a high current heavy ion for the linear accelerator at KBSI (Korea Basic Science Institute). The objective of this study is to generate fast neutrons with a proton target via a p(Li,n)Be reaction. The design and fabrication of the essential components of the ECR ion source, which include a superconducting magnet with a liquid helium re-condensed cryostat and a 10 kW high-power microwave, were completed. The waveguide components were connected with a plasma chamber including a gas supply system. The plasma chamber was inserted into the warm bore of the superconducting magnet. A high voltage system was also installed for the ion beam extraction. After the installation of the ECR ion source, we reported the results for ECR plasma ignition at ECRIS 2014 in Russia. Following plasma ignition, we successfully extracted multi-charged ions and obtained the first results in terms of ion beam spectra from various species. This was verified by a beam diagnostic system for a low energy beam transport system. In this article, we present the first results and report on the current status of the KBSI accelerator project.

  12. First results of 28 GHz superconducting electron cyclotron resonance ion source for KBSI accelerator

    Science.gov (United States)

    Park, Jin Yong; Lee, Byoung-Seob; Choi, Seyong; Kim, Seong Jun; Ok, Jung-Woo; Yoon, Jang-Hee; Kim, Hyun Gyu; Shin, Chang Seouk; Hong, Jonggi; Bahng, Jungbae; Won, Mi-Sook

    2016-02-01

    The 28 GHz superconducting electron cyclotron resonance (ECR) ion source has been developed to produce a high current heavy ion for the linear accelerator at KBSI (Korea Basic Science Institute). The objective of this study is to generate fast neutrons with a proton target via a p(Li,n)Be reaction. The design and fabrication of the essential components of the ECR ion source, which include a superconducting magnet with a liquid helium re-condensed cryostat and a 10 kW high-power microwave, were completed. The waveguide components were connected with a plasma chamber including a gas supply system. The plasma chamber was inserted into the warm bore of the superconducting magnet. A high voltage system was also installed for the ion beam extraction. After the installation of the ECR ion source, we reported the results for ECR plasma ignition at ECRIS 2014 in Russia. Following plasma ignition, we successfully extracted multi-charged ions and obtained the first results in terms of ion beam spectra from various species. This was verified by a beam diagnostic system for a low energy beam transport system. In this article, we present the first results and report on the current status of the KBSI accelerator project.

  13. Progress of superconducting electron cyclotron resonance ion sources at Institute of Modern Physics (IMP)

    Science.gov (United States)

    Sun, L.; Lu, W.; Feng, Y. C.; Zhang, W. H.; Zhang, X. Z.; Cao, Y.; Zhao, Y. Y.; Wu, W.; Yang, T. J.; Zhao, B.; Zhao, H. W.; Ma, L. Z.; Xia, J. W.; Xie, D.

    2014-02-01

    Superconducting ECR ion sources can produce intense highly charged ion beams for the application in heavy ion accelerators. Superconducting Electron Resonance ion source with Advanced Design (SECRAL) is one of the few fully superconducting ECR ion sources that has been successfully built and put into routine operation for years. With enormous efforts and R&D work, promising results have been achieved with the ion source. Heated by the microwave power from a 7 kW/24 GHz gyrotron microwave generator, very intense highly charged gaseous ion beams have been produced, such as 455 eμA Xe27+, 236 eμA Xe30+, and 64 eμA Xe35+. Since heavy metallic ion beams are being more and more attractive and important for many accelerator projects globally, intensive studies have been made to produce highly charged heavy metal ion beams, such as those from bismuth and uranium. Recently, 420 eμA Bi30+ and 202 eμA U33+ have been produced with SECRAL source. This paper will present the latest results with SECRAL, and the operation status will be discussed as well. An introduction of recently started SECRAL II project will also be given in the presentation.

  14. Progress of superconducting electron cyclotron resonance ion sources at Institute of Modern Physics (IMP).

    Science.gov (United States)

    Sun, L; Lu, W; Feng, Y C; Zhang, W H; Zhang, X Z; Cao, Y; Zhao, Y Y; Wu, W; Yang, T J; Zhao, B; Zhao, H W; Ma, L Z; Xia, J W; Xie, D

    2014-02-01

    Superconducting ECR ion sources can produce intense highly charged ion beams for the application in heavy ion accelerators. Superconducting Electron Resonance ion source with Advanced Design (SECRAL) is one of the few fully superconducting ECR ion sources that has been successfully built and put into routine operation for years. With enormous efforts and R&D work, promising results have been achieved with the ion source. Heated by the microwave power from a 7 kW/24 GHz gyrotron microwave generator, very intense highly charged gaseous ion beams have been produced, such as 455 eμA Xe(27+), 236 eμA Xe(30+), and 64 eμA Xe(35+). Since heavy metallic ion beams are being more and more attractive and important for many accelerator projects globally, intensive studies have been made to produce highly charged heavy metal ion beams, such as those from bismuth and uranium. Recently, 420 eμA Bi(30+) and 202 eμA U(33+) have been produced with SECRAL source. This paper will present the latest results with SECRAL, and the operation status will be discussed as well. An introduction of recently started SECRAL II project will also be given in the presentation.

  15. Superconductivity on the verge of electronic topological transition in Fe based superconductors

    Science.gov (United States)

    Ghosh, Haranath; Sen, Smritijit

    2017-04-01

    A comprehensive first principles study on the electronic topological transition in a number of 122 family of Fe based superconductors is presented. Doping as well as temperature driven Lifshitz transitions are predicted from ab-initio simulations in a variety of Fe based superconductors that are consistent with experimental findings. In all the studied compounds the Lifshitz transitions are consistently found to take place at a doping concentration just around where superconductivity is known to acquire the highest Tc and magnetism disappears. This indicates the intriguing heed to the inter-relationship between superconductivity and Lifshitz transition in Fe-based 122 materials. Systematically, the Lifshitz transition occurs (above certain threshold doping) in some of the electronic Fermi surfaces for hole doped 122 compounds, whereas in hole Fermi surfaces for electron as well as iso-electronic doped 122 compounds. Temperature driven Lifshitz transition is found to occur in the iso-electronic Ru-doped BaFe2As2 compounds. A systematic study of Fermi surface area e.g., variations of (i) areas of each individual Fermi surfaces, (ii) sum total areas of all the electron Fermi Surfaces, (iii) sum total areas of all the hole Fermi Surfaces, (iv) sum total areas of all the five Fermi Surfaces, (v) difference of all hole and all electron Fermi surface areas as a function of doping is a rare wealth of information that can be verified by the de Haas-van Alphen and allied effects (i.e. , Shubnikov-de Haas effect) are presented. Fermi surface area are found to carry sensitivity of topological modifications more acutely than the band structures and can be used as a better experimental tool to identify ETT/LT.

  16. First Demonstration of Electron Beam Generation and Characterization with an All Superconducting Radio-frequency (SRF) Photoinjector

    Energy Technology Data Exchange (ETDEWEB)

    Kamps, T; Barday, R; Jankowiak, A; Knobloch, J; Kugeler, O; Matveenko, A N; Neumann, A; Quast, T; Rudolph, J; Schubert, S G; Volker, J; Kneisel, P; Nietubyc, R; Sekutowicz, J K; Smedley, J; Volkov, V; Weinberg, G

    2011-09-01

    In preparation for a high brightness, high average current electron source for the energy-recovery linac BERLinPro an all superconducting radio-frequency photoinjector is now in operation at Helmholtz-Zentrum Berlin. The aim of this experiment is beam demonstration with a high brightness electron source able to generate sub-ps pulse length electron bunches from a superconducting (SC) cathode film made of Pb coated on the backwall of a Nb SRF cavity. This paper describes the setup of the experiment and first results from beam measurements.

  17. Appearance of Spatial-Temporal Noise in Super-conducting Junction and Its Effect on Transport of Electron Pairs

    Institute of Scientific and Technical Information of China (English)

    LI Jing-Hui

    2007-01-01

    Transport of electron pairs in super-conducting junction with spatial-temporal noise is investigated.We show that the spatial-temporal noise can produce the current of the electron pairs,which stems from a symmetry breaking of the system induced by the correlation of the spatial-temporal noise with the phase difference.It is found that there is a positive current for the electron pairs,exhibiting a peak with increasing the values of some parameters of the noises.The results provide a theoretical foundation for the further investigation of the super-conducting junction.

  18. Orthogonal sequencing multiplexer for superconducting nanowire single-photon detectors with RSFQ electronics readout circuit.

    Science.gov (United States)

    Hofherr, Matthias; Wetzstein, Olaf; Engert, Sonja; Ortlepp, Thomas; Berg, Benjamin; Ilin, Konstantin; Henrich, Dagmar; Stolz, Ronny; Toepfer, Hannes; Meyer, Hans-Georg; Siegel, Michael

    2012-12-17

    We propose an efficient multiplexing technique for superconducting nanowire single-photon detectors based on an orthogonal detector bias switching method enabling the extraction of the average count rate of a set of detectors by one readout line. We implemented a system prototype where the SNSPDs are connected to an integrated cryogenic readout and a pulse merger system based on rapid single flux quantum (RSFQ) electronics. We discuss the general scalability of this concept, analyze the environmental requirements which define the resolvability and the accuracy and demonstrate the feasibility of this approach with experimental results for a SNSPD array with four pixels.

  19. The Use of a Solid State Analog Television Transmitter as a Superconducting Electron Gun Power Amplifier

    Energy Technology Data Exchange (ETDEWEB)

    J.G. Kulpin, K.J. Kleman, R.A. Legg

    2012-07-01

    A solid state analog television transmitter designed for 200 MHz operation is being commissioned as a radio frequency power amplifier on the Wisconsin superconducting electron gun cavity. The amplifier consists of three separate radio frequency power combiner cabinets and one monitor and control cabinet. The transmitter employs rugged field effect transistors built into one kilowatt drawers that are individually hot swappable at maximum continuous power output. The total combined power of the transmitter system is 33 kW at 200 MHz, output through a standard coaxial transmission line. A low level radio frequency system is employed to digitally synthesize the 200 MHz signal and precisely control amplitude and phase.

  20. Superconductivity without dependence on valence electron density in Zn doped YBCO systems

    Institute of Scientific and Technical Information of China (English)

    Li Ping-Lin; Wang Yong-Yong; Tian Yong-Tao; Wang Jing; Niu Xiao-Li; Wang Jun-Xi; Wang Dan-Dan; Wang Xiao-Xia

    2008-01-01

    This paper reports that the YBa2Cu3-xZnxO7-δ(x=0-0.4)samples are researched by means of x-ray diffraction,calculations of binding energy,the positron experiments and variations of oxygen content.The results of simulated calculations,positron experiments and variations of oxygen content support the existence of cluster effect.Moreover,it is concluded that the cluster effect is an important factor on suppression of high-Tc cuprate superconductivity and the Tc does not depend on the density of valence electron directly.

  1. A novel electron beam evaporation technique for the deposition of superconducting thin films

    Science.gov (United States)

    Krishna, M. G.; Muralidhar, G. K.; Rao, K. N.; Rao, G. M.; Mohan, S.

    1991-05-01

    Superconducting thin films of BiSrCaCuO have been deposited using a novel electron beam evaporation technique. In this technique the crucible has a groove around its circumference and rotates continuously during deposition. The source material is loaded in the form of pellets of the composite. Both oxides as well as flourides have been used in the starting material and a comparison of the film properties has been made. The best film was obtained on a MgO(100) substrate with a Tc onset at 85 K and Tc zero at 77 K using calcium flouride in the source material.

  2. Development of an 18 GHz superconducting electron cyclotron resonance ion source at RCNP.

    Science.gov (United States)

    Yorita, Tetsuhiko; Hatanaka, Kichiji; Fukuda, Mitsuhiro; Kibayashi, Mitsuru; Morinobu, Shunpei; Okamura, Hiroyuki; Tamii, Atsushi

    2008-02-01

    An 18 GHz superconducting electron cyclotron resonance ion source has recently been developed and installed in order to extend the variety and the intensity of ions at the RCNP coupled cyclotron facility. Production of several ions such as O, N, Ar, Kr, etc., is now under development and some of them have already been used for user experiments. For example, highly charged heavy ion beams like (86)Kr(21+,23+) and intense (16)O(5+,6+) and (15)N(6+) ion beams have been provided for experiments. The metal ion from volatile compounds method for boron ions has been developed as well.

  3. Simulation of electronic structure Hamiltonians in a superconducting quantum computer architecture

    Energy Technology Data Exchange (ETDEWEB)

    Kaicher, Michael; Wilhelm, Frank K. [Theoretical Physics, Saarland University, 66123 Saarbruecken (Germany); Love, Peter J. [Department of Physics, Haverford College, Haverford, Pennsylvania 19041 (United States)

    2015-07-01

    Quantum chemistry has become one of the most promising applications within the field of quantum computation. Simulating the electronic structure Hamiltonian (ESH) in the Bravyi-Kitaev (BK)-Basis to compute the ground state energies of atoms/molecules reduces the number of qubit operations needed to simulate a single fermionic operation to O(log(n)) as compared to O(n) in the Jordan-Wigner-Transformation. In this work we will present the details of the BK-Transformation, show an example of implementation in a superconducting quantum computer architecture and compare it to the most recent quantum chemistry algorithms suggesting a constant overhead.

  4. Vibrational excitation induced by electron beam and cosmic rays in normal and superconductive aluminum bars

    CERN Document Server

    Bassan, M; Cavallari, G; Coccia, E; D'Antonio, S; Fafone, V; Foggetta, L G; Ligi, C; Marini, A; Mazzitelli, G; Modestino, G; Pizzella, G; Quintieri, L; Ronga, F; Valente, P; Vinko, S M

    2011-01-01

    We report new measurements of the acoustic excitation of an Al5056 superconductive bar when hit by an electron beam, in a previously unexplored temperature range, down to 0.35 K. These data, analyzed together with previous results of the RAP experiment obtained for T > 0.54 K, show a vibrational response enhanced by a factor 4.9 with respect to that measured in the normal state. This enhancement explains the anomalous large signals due to cosmic rays previously detected in the NAUTILUS gravitational wave detector.

  5. Production of a highly charged uranium ion beam with RIKEN superconducting electron cyclotron resonance ion source

    Energy Technology Data Exchange (ETDEWEB)

    Higurashi, Y.; Ohnishi, J.; Nakagawa, T.; Haba, H.; Fujimaki, M.; Komiyama, M.; Kamigaito, O. [RIKEN Nishina Center, 2-1 Hirosawa, Wako-shi, Saitama 351-0198 (Japan); Tamura, M.; Aihara, T.; Uchiyama, A. [SHI Accelerator Service Ltd., 1-17-6 Osaki, Shinagawa, Tokyo 141-0032 (Japan)

    2012-02-15

    A highly charged uranium (U) ion beam is produced from the RIKEN superconducting electron cyclotron resonance ion source using 18 and 28 GHz microwaves. The sputtering method is used to produce this U ion beam. The beam intensity is strongly dependent on the rod position and sputtering voltage. We observe that the emittance of U{sup 35+} for 28 GHz microwaves is almost the same as that for 18 GHz microwaves. It seems that the beam intensity of U ions produced using 28 GHz microwaves is higher than that produced using 18 GHz microwaves at the same Radio Frequency (RF) power.

  6. Mechanical, electronic, optical, thermodynamic properties and superconductivity of ScGa3

    Science.gov (United States)

    Parvin, F.; Hossain, M. A.; Ali, M. S.; Islam, A. K. M. A.

    2015-01-01

    The rare occurrence of type-I superconductivity in binary system ScGa3 has experimentally been shown recently. In the present paper we study the electronic, optical, thermodynamic properties and some aspects of superconductivity of this compound using first-principles calculations. The mechanical properties like elastic constants, bulk modulus, shear modulus, Pugh's ductility index, Young's modulus, Poisson's ratio, elastic anisotropy factor, Peierls stress are calculated for the first time. The material is anisotropic and brittle. Electronic band structure, density of states, Fermi surfaces and bonding nature have also been studied. The optical functions are estimated and discussed for the first time. The high reflectivity is found in the ultraviolet regions up to ~13 eV and thus ScGa3 can serve as a possible shielding material for ultraviolet radiation. Thermal effects on some macroscopic properties of ScGa3 are predicted using the quasi-harmonic Debye model and phonon approximation in the temperature and hydrostatic pressure in the ranges of 0-1000 K and 0-40 GPa, respectively. The calculated electron-phonon coupling constant λ=0.52 yields Tc=2.6 K, which is in very good agreement with the experimentally observed value. The value of the coupling constant and the Ginzburg-Landau parameter (κ=0.09) indicate that the compound is a weak-coupled type-I rare binary BCS superconductor.

  7. An Electron Bunch Compression Scheme for a Superconducting Radio Frequency Linear Accelerator Driven Light Source

    Energy Technology Data Exchange (ETDEWEB)

    C. Tennant, S.V. Benson, D. Douglas, P. Evtushenko, R.A. Legg

    2011-09-01

    We describe an electron bunch compression scheme suitable for use in a light source driven by a superconducting radio frequency (SRF) linac. The key feature is the use of a recirculating linac to perform the initial bunch compression. Phasing of the second pass beam through the linac is chosen to de-chirp the electron bunch prior to acceleration to the final energy in an SRF linac ('afterburner'). The final bunch compression is then done at maximum energy. This scheme has the potential to circumvent some of the most technically challenging aspects of current longitudinal matches; namely transporting a fully compressed, high peak current electron bunch through an extended SRF environment, the need for a RF harmonic linearizer and the need for a laser heater. Additional benefits include a substantial savings in capital and operational costs by efficiently using the available SRF gradient.

  8. Superconductivity and electron-phonon coupling in doped MgB{sub 2} and related compounds

    Energy Technology Data Exchange (ETDEWEB)

    Petzold, V.; Rosner, H. [MPI CPfS Dresden (Germany); Koepernik, K. [MPI CPfS Dresden (Germany); IFW Dresden (Germany)

    2007-07-01

    Recently, substitutions on the Mg site in MgB{sub 2}, e.g., Mg{sub 1-x}Sc{sub x}B{sub 2}, Mg{sub 1-x}(AlLi){sub x}B{sub 2} were investigated intensively. For achievable doping levels, Mg{sub 1-x}Sc{sub x}B{sub 2} shows only very small structural changes but clear changes in the electronic structure, whereas AlLi doping affects the lattice parameters but has almost no influence on the electronic structure. Our theoretical approach comprises different approximations in the framework of band structure calculations: the rigid band and virtual crystal method as well as supercell calculations and coherent potential approximation. We show that the latter two lead to consistent results with respect to lattice expansion and electronic properties. We show that lattice effects are of minor importance. Concluding that the B 2p {sigma} states remain the most relevant subsystem with regard to superconductivity, we calculated the electron phonon coupling constant {lambda} and the critical temperature T{sub c}. In contrast, for ZrB{sub 2} as a typical representative of transition metal diborides TB{sub 2} we find the sp{sup 2}(B)-d(T) hybridization to be crucial. Comparing calculated and measured angle dependent dHvA-data we show that: (i) LDA provides an excellent description of the electronic structure of TB{sub 2}. (ii) The electron phonon coupling is too small to expect superconductivity above a few mK for the stoichiometric compounds. (orig.)

  9. Evidence for a Lifshitz transition in electron-doped iron arsenic superconductors at the onset of superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Chang; Kondo, T.; Fernandes, R.M.; Palczewski, Ari D.; Mun, Eun Deok; Ni, Ni; Thaler, Alexander N.; Bostwick, Aaron; Rotenberg, Eli; Schmalian, Jorg; Bud-ko, Sergey L.; Canfield, Paul C.; and Kaminski, A.

    2010-05-02

    The iron arsenic high-temperature superconductors exhibit particularly rich phase diagrams. In the AE(Fe{sub 1-x}T{sub x}){sub 2}As{sub 2} family (known as '122', with AE being Ca, Sr or Ba and T being a transition metal), the simultaneous structural/magnetic phase transition that occurs at elevated temperature in the undoped material splits and is suppressed by carrier doping. A superconducting region appears as likely in the orthorhombic/antiferromagnetic (AFM) state as in the tetragonal/paramagnetic state. An important question then is what determines the critical doping at which superconductivity emerges, as the AFM order is fully suppressed only close to optimal doping. Here we report evidence from angle-resolved photoemission spectroscopy that marked changes in the Fermi surface coincide with the onset of superconductivity in electron-doped Ba(Fe{sub 1-x}Co{sub x}){sub 2}As{sub 2}. The presence of the AFM order leads to a reconstruction of the electronic structure, most significantly the appearance of the petal-like hole pockets at the Fermi level. These hole pockets vanish - that is, undergo a Lifshitz transition - as the cobalt concentration is increased sufficiently to support superconductivity. Superconductivity and magnetism are competing states in this system: when petal-like hole pockets are present, superconductivity is fully suppressed, whereas in their absence the two states can coexist.

  10. Intense highly charged ion beam production and operation with a superconducting electron cyclotron resonance ion source

    Science.gov (United States)

    Zhao, H. W.; Sun, L. T.; Guo, J. W.; Lu, W.; Xie, D. Z.; Hitz, D.; Zhang, X. Z.; Yang, Y.

    2017-09-01

    The superconducting electron cyclotron resonance ion source with advanced design in Lanzhou (SECRAL) is a superconducting-magnet-based electron cyclotron resonance ion source (ECRIS) for the production of intense highly charged heavy ion beams. It is one of the best performing ECRISs worldwide and the first superconducting ECRIS built with an innovative magnet to generate a high strength minimum-B field for operation with heating microwaves up to 24-28 GHz. Since its commissioning in 2005, SECRAL has so far produced a good number of continuous wave intensity records of highly charged ion beams, in which recently the beam intensities of 40Ar+ and 129Xe26+ have, for the first time, exceeded 1 emA produced by an ion source. Routine operations commenced in 2007 with the Heavy Ion accelerator Research Facility in Lanzhou (HIRFL), China. Up to June 2017, SECRAL has been providing more than 28,000 hours of highly charged heavy ion beams to the accelerator demonstrating its great capability and reliability. The great achievement of SECRAL is accumulation of numerous technical advancements, such as an innovative magnetic system and an efficient double-frequency (24 +18 GHz ) heating with improved plasma stability. This article reviews the development of SECRAL and production of intense highly charged ion beams by SECRAL focusing on its unique magnet design, source commissioning, performance studies and enhancements, beam quality and long-term operation. SECRAL development and its performance studies representatively reflect the achievements and status of the present ECR ion source, as well as the ECRIS impacts on HIRFL.

  11. First-principles study of the electronic structure of iron-selenium: Implications for electron-phonon superconductivity

    Science.gov (United States)

    Koufos, Alexander P.; Papaconstantopoulos, Dimitrios A.; Mehl, Michael J.

    2014-01-01

    We have performed density functional theory calculations using the linearized augmented plane wave method (LAPW) with the local density approximation (LDA) functional to study the electronic structure of the iron-based superconductor iron-selenium (FeSe). In our study, we have performed a comprehensive set of calculations involving structural, atomic, and spin configurations. All calculations were executed using the tetragonal lead-oxide or P4/nmm structure, with various volumes, c /a ratios, and internal parameters. Furthermore, we investigated the spin polarization using the LDA functional to assess ferromagnetism in this material. The paramagnetic LDA calculations find the equilibrium configuration of FeSe in the P4/nmm structure to have a volume of 472.5 a.u.3 with a c /a ratio of 1.50 and internal parameter of 0.255, with the ferromagnetic having comparable results to the paramagnetic case. In addition, we calculated total energies for FeSe using a pseudopotential method, and found comparable results to the LAPW calculations. Superconductivity calculations were done using the Gaspari-Gyorffy and the McMillan formalisms and found substantial electron-phonon coupling. Under pressure, our calculations show that the superconductivity critical temperature continues to rise, but underestimates the measured values.

  12. 3rd Cryocooler Conference

    CERN Document Server

    Louie, Berverly; McCarthy, Sandy

    1985-01-01

    Cryocoolers 3 documents the output of the Third Cryocooler Conference, held at the National Bureau of Standards, Boulder, Colorado, on September 17-18, 1984. About 140 people from 10 countries attended the conference representing industry, government, and academia. A total of 26 papers were presented orally at the conference and all appear in written form in the proceedings. The focus of this conference was on small cryocoolers in the temperature range of 4 - 80 K. Mechanical and nonmechanical types are discussed in the various papers. Applications of these small cryocoolers include the cooling of infrared detectors, cryopumps, small superconducting devices and magnets, and electronic devices. The conference proceedings reproduced here was published by the National Bureau of Standards in Boulder, Colorado as NBS Special Publication #698.

  13. Coupling an Ensemble of Electrons on Superfluid Helium to a Superconducting Circuit

    Directory of Open Access Journals (Sweden)

    Ge Yang

    2016-03-01

    Full Text Available The quantized lateral motional states and the spin states of electrons trapped on the surface of superfluid helium have been proposed as basic building blocks of a scalable quantum computer. Circuit quantum electrodynamics allows strong dipole coupling between electrons and a high-Q superconducting microwave resonator, enabling such sensitive detection and manipulation of electron degrees of freedom. Here, we present the first realization of a hybrid circuit in which a large number of electrons are trapped on the surface of superfluid helium inside a coplanar waveguide resonator. The high finesse of the resonator allows us to observe large dispersive shifts that are many times the linewidth and make fast and sensitive measurements on the collective vibrational modes of the electron ensemble, as well as the superfluid helium film underneath. Furthermore, a large ensemble coupling is observed in the dispersive regime during experiment, and it shows excellent agreement with our numeric model. The coupling strength of the ensemble to the cavity is found to be ≈1  MHz per electron, indicating the feasibility of achieving single electron strong coupling.

  14. Can electron multipacting explain the pressure rise in a cold bore superconducting undulator?

    Directory of Open Access Journals (Sweden)

    S. Casalbuoni

    2010-07-01

    Full Text Available Preliminary studies performed with the cold bore superconducting undulator installed in the ANKA (Angstrom source Karlsruhe storage ring suggest that the beam heat load is mainly due to the electron wall bombardment. Electron bombardment can both heat the cold vacuum chamber and induce an increase in the pressure because of gas desorption. In this contribution we compare the measurements of the pressure in a cold bore performed in the electron storage ring ANKA with the predictions obtained using the equations of gas dynamic balance in a cold vacuum chamber exposed to synchrotron radiation and electron bombardment. The balance results from two competing effects: the photon and electron stimulated desorption of the gas contained in the surface layer of the chamber wall and of the gas cryosorbed, and the cryopumping by the cold surface. We show that photodesorption alone cannot explain the experimental results and that electron multipacting is needed to reproduce the observed pressure rise. Electron bombardment can at the same time explain the observed beam heat load.

  15. Pinning effects on hot-electron vortex flow instability in superconducting films

    Science.gov (United States)

    Shklovskij, Valerij A.

    2017-07-01

    The hot-electron vortex flow instability in superconducting films in magnetic field B at substrate temperature T0 ≪ Tc is theoretically considered in the presence of pinning. The magnetic field dependences of the instability critical parameters (electric field E*, current density j*, resistivity ρ*, power density P* and vortex velocity v*) are derived for a cosine and a saw-tooth washboard pinning potential and compared with the results obtained earlier by M. Kunchur [Phys. Rev. Lett. 89 (2002) 137005] in absence of pinning. It is shown that the B-behavior of E*, j* and ρ* is monotonic, whereas the B-dependence of v* is quite different, namely dv*/dB may change its sign twice, as sometimes observed in experiments. The simplest heat balance equation for electrons in low-Tc superconducting films is considered within the framework of the two-fluid model. A theoretical analysis reveals that the instability critical temperature T* ≈ 5Tc/6 at T0 < T*/2 with T* being independent of B.

  16. Mechanical, electronic, optical, thermodynamic properties and superconductivity of ScGa{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Parvin, F. [Department of Physics, Rajshahi University, Rajshahi (Bangladesh); Hossain, M.A. [Department of Physics, Mawlana Bhashani Science and Technology University, Santosh, Tangail 1902 (Bangladesh); Ali, M.S. [Department of Physics, Rajshahi University, Rajshahi (Bangladesh); Islam, A.K.M.A., E-mail: azi46@ru.ac.bd [International Islamic University Chittagong, 154/A College Road, Chittagong 4203 (Bangladesh)

    2015-01-15

    The rare occurrence of type-I superconductivity in binary system ScGa{sub 3} has experimentally been shown recently. In the present paper we study the electronic, optical, thermodynamic properties and some aspects of superconductivity of this compound using first-principles calculations. The mechanical properties like elastic constants, bulk modulus, shear modulus, Pugh's ductility index, Young's modulus, Poisson's ratio, elastic anisotropy factor, Peierls stress are calculated for the first time. The material is anisotropic and brittle. Electronic band structure, density of states, Fermi surfaces and bonding nature have also been studied. The optical functions are estimated and discussed for the first time. The high reflectivity is found in the ultraviolet regions up to ∼13 eV and thus ScGa{sub 3} can serve as a possible shielding material for ultraviolet radiation. Thermal effects on some macroscopic properties of ScGa{sub 3} are predicted using the quasi-harmonic Debye model and phonon approximation in the temperature and hydrostatic pressure in the ranges of 0–1000 K and 0–40 GPa, respectively. The calculated electron–phonon coupling constant λ=0.52 yields T{sub c}=2.6 K, which is in very good agreement with the experimentally observed value. The value of the coupling constant and the Ginzburg–Landau parameter (κ=0.09) indicate that the compound is a weak-coupled type-I rare binary BCS superconductor.

  17. Application of FPGA technology for control of superconducting TESLA cavities in free electron laser

    Science.gov (United States)

    Pozniak, Krzysztof T.

    2006-10-01

    Contemporary fundamental research in physics, biology, chemistry, pharmacology, material technology and other uses frequently methods basing on collision of high energy particles or penetration of matter with ultra-short electromagnetic waves. Kinetic energy of involved particles, considerably greater than GeV, is generated in accelerators of unique construction. The paper presents a digest of working principles of accelerators. There are characterized research methods which use accelerators. A method to stabilize the accelerating EM field in superconducting (SC) resonant cavity was presented. An example was given of usage of TESLA cavities in linear accelerator propelling the FLASH free electron laser (FEL) in DESY, Hamburg. Electronic and photonic control system was debated. The system bases on advanced FPGA circuits and cooperating fast DSP microprocessor chips. Examples of practical solutions were described. Test results of the debated systems in the real-time conditions were given.

  18. Electronic structure, magnetic and superconducting properties of co-doped iron-arsenide superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Rosner, Helge; Schnelle, Walter; Nicklas, Michael; Leithe-Jasper, Andreas [MPI CPfS Dresden (Germany); Weikert, Franziska [Los Alamos National Laboratory, New Mexico (United States); HLD Dresden Rossendorf (Germany); Wosnitza, Joachim [HLD Dresden Rossendorf (Germany)

    2013-07-01

    We present a joint experimental and theoretical study of co-doped iron-arsenide superconductors of the 122 family A{sub 1-x}K{sub x}Fe{sub 2-y}T{sub y}As{sub 2} (A = Ba,Sr,Eu; T = Co,Ru,Rh). In these systems, the co-doping enables the separation of different parameters - like electron count, disorder or the specific geometry of the FeAs layer - with respect to the position of the respective compounds in the general 122 phase diagram. For a series of compounds, we investigate the relevance of the different parameters for the magnetic, thermodynamic and superconducting properties. Our experimental investigations are supported by density functional electronic structure calculations applying different approximations for doping and disorder.

  19. Results of RIKEN superconducting electron cyclotron resonance ion source with 28 GHz.

    Science.gov (United States)

    Higurashi, Y; Ohnishi, J; Nakagawa, T; Haba, H; Tamura, M; Aihara, T; Fujimaki, M; Komiyama, M; Uchiyama, A; Kamigaito, O

    2012-02-01

    We measured the beam intensity of highly charged heavy ions and x-ray heat load for RIKEN superconducting electron cyclotron resonance ion source with 28 GHz microwaves under the various conditions. The beam intensity of Xe(20+) became maximum at B(min) ∼ 0.65 T, which was ∼65% of the magnetic field strength of electron cyclotron resonance (B(ECR)) for 28 GHz microwaves. We observed that the heat load of x-ray increased with decreasing gas pressure and field gradient at resonance zone. It seems that the beam intensity of highly charged heavy ions with 28 GHz is higher than that with 18 GHz at same RF power.

  20. Continuous wave superconducting radio frequency electron linac for nuclear physics research

    Science.gov (United States)

    Reece, Charles E.

    2016-12-01

    CEBAF, the Continuous Electron Beam Accelerator Facility, has been actively serving the nuclear physics research community as a unique forefront international resource since 1995. This cw electron linear accelerator (linac) at the U.S. Department of Energy's Thomas Jefferson National Accelerator Facility (Jefferson Lab) has continued to evolve as a precision tool for discerning the structure and dynamics within nuclei. Superconducting rf (SRF) technology has been the essential foundation for CEBAF, first as a 4 GeV machine, then 6 GeV, and currently capable of 12 GeV. We review the development, implementation, and performance of SRF systems for CEBAF from its early beginnings to the commissioning of the 12 GeV era.

  1. EPW: Electron-phonon coupling, transport and superconducting properties using maximally localized Wannier functions

    Science.gov (United States)

    Poncé, S.; Margine, E. R.; Verdi, C.; Giustino, F.

    2016-12-01

    The EPW (Electron-Phonon coupling using Wannier functions) software is a Fortran90 code that uses density-functional perturbation theory and maximally localized Wannier functions for computing electron-phonon couplings and related properties in solids accurately and efficiently. The EPW v4 program can be used to compute electron and phonon self-energies, linewidths, electron-phonon scattering rates, electron-phonon coupling strengths, transport spectral functions, electronic velocities, resistivity, anisotropic superconducting gaps and spectral functions within the Migdal-Eliashberg theory. The code now supports spin-orbit coupling, time-reversal symmetry in non-centrosymmetric crystals, polar materials, and k and q-point parallelization. Considerable effort was dedicated to optimization and parallelization, achieving almost a ten times speedup with respect to previous releases. A computer test farm was implemented to ensure stability and portability of the code on the most popular compilers and architectures. Since April 2016, version 4 of the EPW code is fully integrated in and distributed with the Quantum ESPRESSO package, and can be downloaded through QE-forge at http://qe-forge.org/gf/project/q-e.

  2. 2008 Electron Donor Acceptor Interactions Gordon Research Conference-August 3-8, 2009

    Energy Technology Data Exchange (ETDEWEB)

    Malcolm Forbes and Nancy Ryan Gray

    2009-09-19

    The conference presents and advances the current frontiers in experimental and theoretical studies of Electron Transfer and Transport in Molecular and Nano-scale Systems. The program includes sessions on coupled electron transfers, molecular solar energy conversion, biological and biomimetic systems, spin effects, ultrafast reactions and technical frontiers as well as electron transport in single molecules and devices.

  3. 2012 Gordon Research Conference, Electron donor-acceptor interactions, August 5-10 2012

    Energy Technology Data Exchange (ETDEWEB)

    McCusker, James [Michigan State Univ., East Lansing, MI (United States)

    2012-08-10

    The upcoming incarnation of the Gordon Research Conference on Electron Donor Acceptor Interactions will feature sessions on classic topics including proton-coupled electron transfer, dye-sensitized solar cells, and biological electron transfer, as well as emerging areas such as quantum coherence effects in donor-acceptor interactions, spintronics, and the application of donor-acceptor interactions in chemical synthesis.

  4. International Conference on Emerging Research in Electronics, Computer Science and Technology

    CERN Document Server

    Sheshadri, Holalu; Padma, M

    2014-01-01

    PES College of Engineering is organizing an International Conference on Emerging Research in Electronics, Computer Science and Technology (ICERECT-12) in Mandya and merging the event with Golden Jubilee of the Institute. The Proceedings of the Conference presents high quality, peer reviewed articles from the field of Electronics, Computer Science and Technology. The book is a compilation of research papers from the cutting-edge technologies and it is targeted towards the scientific community actively involved in research activities.

  5. PREFACE: Electron Microscopy and Analysis Group Conference (EMAG2015)

    Science.gov (United States)

    MacLaren, Ian

    2015-10-01

    2015 marked a new venture for the EMAG group of the Institute of Physics in that the conference was held in conjunction with the MMC2015 conference at the wonderful Manchester Central conference centre. As anyone who was there would be able to confirm, this went exceptionally well and was a really vibrant and top quality conference. The oral sessions were filled with good talks, the poster sessions were very lively, and there was a good balance between oral sessions with a specifically "EMAG" identity, and the integration into a larger conference with the ability to switch between up to six parallel sessions covering physical sciences, techniques, and life sciences. The large conference also attracted a wide range of exhibitors, and this is essential for the ongoing success of all of our work, in a field that is very dependent on continued technical innovation and on collaborations between academic researchers and commercial developers of microscopes, holders, detectors, spectrometers, sample preparation equipment, and software, among other things. As has long been the case at EMAG, all oral and poster presenters were invited to submit papers for consideration for the proceedings. As ever, these papers were independently reviewed by other conference attendees, with the aim of continuing the long tradition of the EMAG proceedings being a top quality, peer-reviewed publication, worthy of reference in future years. Whilst I recognise that not all presenters were able to submit papers to the proceedings (for instance due to the need not to prejudice publication in some other journals, or due to avoiding duplicate publication of data), we are gratified that our presenters submitted as many papers as they did. The 41 papers included provide an interesting snapshot of many of the areas covered in the conference presentations, including functional materials, coatings, 3D microscopy, FIB and SEM, nanomaterials, magnetic and structural materials, advances in EM techniques

  6. Multiband superconductivity in the correlated electron filled skutterudite system Pr1-xCexPt4Ge12

    Science.gov (United States)

    Singh, Y. P.; Adhikari, R. B.; Zhang, S.; Huang, K.; Yazici, D.; Jeon, I.; Maple, M. B.; Dzero, M.; Almasan, C. C.

    2016-10-01

    Studies of superconductivity in multiband correlated electronic systems have become one of the central topics in condensed-matter and materials physics. In this paper, we present the results of thermodynamic measurements on the superconducting filled skutterudite system Pr1 -xCexPt4Ge12 (0 ≤x ≤0.2 ) to investigate how substitution of Ce at Pr sites affects superconductivity. We find that an increase in Ce concentration leads to a suppression of the superconducting transition temperature from Tc˜7.9 K for x =0 to Tc˜0.6 K for x =0.14 . Our analysis of the specific-heat data for x ≤0.07 reveals that superconductivity must develop in at least two bands: the superconducting order parameter has nodes on one Fermi pocket and remains fully gapped on the other. Both the nodal and nodeless gaps decrease, with the nodal gap being suppressed more strongly upon Ce substitution. Ultimately, the higher-Ce-concentration samples (x >0.07 ) display a nodeless gap only.

  7. Fabrication of superconducting MgB2 nanostructures by an electron beam lithography-based technique

    Science.gov (United States)

    Portesi, C.; Borini, S.; Amato, G.; Monticone, E.

    2006-03-01

    In this work, we present the results obtained in fabrication and characterization of magnesium diboride nanowires realized by an electron beam lithography (EBL)-based method. For fabricating MgB2 thin films, an all in situ technique has been used, based on the coevaporation of B and Mg by means of an e-gun and a resistive heater, respectively. Since the high temperatures required for the fabrication of good quality MgB2 thin films do not allow the nanostructuring approach based on the lift-off technique, we structured the samples combining EBL, optical lithography, and Ar milling. In this way, reproducible nanowires 1 μm long have been obtained. To illustrate the impact of the MgB2 film processing on its superconducting properties, we measured the temperature dependence of the resistance on a nanowire and compared it to the original magnesium diboride film. The electrical properties of the films are not degraded as a consequence of the nanostructuring process, so that superconducting nanodevices may be obtained by this method.

  8. Nb3Sn superconducting magnets for electron cyclotron resonance ion sources.

    Science.gov (United States)

    Ferracin, P; Caspi, S; Felice, H; Leitner, D; Lyneis, C M; Prestemon, S; Sabbi, G L; Todd, D S

    2010-02-01

    Electron cyclotron resonance (ECR) ion sources are an essential component of heavy-ion accelerators. Over the past few decades advances in magnet technology and an improved understanding of the ECR ion source plasma physics have led to remarkable performance improvements of ECR ion sources. Currently third generation high field superconducting ECR ion sources operating at frequencies around 28 GHz are the state of the art ion injectors and several devices are either under commissioning or under design around the world. At the same time, the demand for increased intensities of highly charged heavy ions continues to grow, which makes the development of even higher performance ECR ion sources a necessity. To extend ECR ion sources to frequencies well above 28 GHz, new magnet technology will be needed in order to operate at higher field and force levels. The superconducting magnet program at LBNL has been developing high field superconducting magnets for particle accelerators based on Nb(3)Sn superconducting technology for several years. At the moment, Nb(3)Sn is the only practical conductor capable of operating at the 15 T field level in the relevant configurations. Recent design studies have been focused on the possibility of using Nb(3)Sn in the next generation of ECR ion sources. In the past, LBNL has worked on the VENUS ECR, a 28 GHz source with solenoids and a sextupole made with NbTi operating at fields of 6-7 T. VENUS has now been operating since 2004. We present in this paper the design of a Nb(3)Sn ECR ion source optimized to operate at an rf frequency of 56 GHz with conductor peak fields of 13-15 T. Because of the brittleness and strain sensitivity of Nb(3)Sn, particular care is required in the design of the magnet support structure, which must be capable of providing support to the coils without overstressing the conductor. In this paper, we present the main features of the support structure, featuring an external aluminum shell pretensioned with water

  9. Nb3Sn superconducting magnets for electron cyclotron resonance ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Ferracin, P.; Caspi, S.; Felice, H.; Leitner, D.; Lyneis, C. M.; Prestemon, S.; Sabbi, G. L.; Todd, D. S.

    2009-05-04

    Electron cyclotron resonance (ECR) ion sources are an essential component of heavy-ion accelerators. Over the past few decades advances in magnet technology and an improved understanding of the ECR ion source plasma physics have led to remarkable performance improvements of ECR ion sources. Currently third generation high field superconducting ECR ion sources operating at frequencies around 28 GHz are the state of the art ion injectors and several devices are either under commissioning or under design around the world. At the same time, the demand for increased intensities of highly charged heavy ions continues to grow, which makes the development of even higher performance ECR ion sources a necessity. To extend ECR ion sources to frequencies well above 28 GHz, new magnet technology will be needed in order to operate at higher field and force levels. The superconducting magnet program at LBNL has been developing high field superconducting magnets for particle accelerators based on Nb{sub 3}Sn superconducting technology for several years. At the moment, Nb{sub 3}Sn is the only practical conductor capable of operating at the 15 T field level in the relevant configurations. Recent design studies have been focused on the possibility of using Nb{sub 3}Sn in the next generation of ECR ion sources. In the past, LBNL has worked on the VENUS ECR, a 28 GHz source with solenoids and a sextupole made with NbTi operating at fields of 6-7 T. VENUS has now been operating since 2004. We present in this paper the design of a Nb{sub 3}Sn ECR ion source optimized to operate at an rf frequency of 56 GHz with conductor peak fields of 13-15 T. Because of the brittleness and strain sensitivity of Nb{sub 3}Sn- , particular care is required in the design of the magnet support structure, which must be capable of providing support to the coils without overstressing the conductor. In this paper, we present the main features of the support structure, featuring an external aluminum shell

  10. Nb3Sn superconducting magnets for electron cyclotron resonance ion sources

    Energy Technology Data Exchange (ETDEWEB)

    Ferracin, P.; Caspi, S.; Felice, H.; Leitner, D.; Lyneis, C. M.; Prestemon, S.; Sabbi, G. L.; Todd, D. S.

    2009-05-04

    Electron cyclotron resonance (ECR) ion sources are an essential component of heavy-ion accelerators. Over the past few decades advances in magnet technology and an improved understanding of the ECR ion source plasma physics have led to remarkable performance improvements of ECR ion sources. Currently third generation high field superconducting ECR ion sources operating at frequencies around 28 GHz are the state of the art ion injectors and several devices are either under commissioning or under design around the world. At the same time, the demand for increased intensities of highly charged heavy ions continues to grow, which makes the development of even higher performance ECR ion sources a necessity. To extend ECR ion sources to frequencies well above 28 GHz, new magnet technology will be needed in order to operate at higher field and force levels. The superconducting magnet program at LBNL has been developing high field superconducting magnets for particle accelerators based on Nb{sub 3}Sn superconducting technology for several years. At the moment, Nb{sub 3}Sn is the only practical conductor capable of operating at the 15 T field level in the relevant configurations. Recent design studies have been focused on the possibility of using Nb{sub 3}Sn in the next generation of ECR ion sources. In the past, LBNL has worked on the VENUS ECR, a 28 GHz source with solenoids and a sextupole made with NbTi operating at fields of 6-7 T. VENUS has now been operating since 2004. We present in this paper the design of a Nb{sub 3}Sn ECR ion source optimized to operate at an rf frequency of 56 GHz with conductor peak fields of 13-15 T. Because of the brittleness and strain sensitivity of Nb{sub 3}Sn- , particular care is required in the design of the magnet support structure, which must be capable of providing support to the coils without overstressing the conductor. In this paper, we present the main features of the support structure, featuring an external aluminum shell

  11. 100 years of superconductivity

    CERN Document Server

    Rogalla, Horst

    2011-01-01

    Even a hundred years after its discovery, superconductivity continues to bring us new surprises, from superconducting magnets used in MRI to quantum detectors in electronics. 100 Years of Superconductivity presents a comprehensive collection of topics on nearly all the subdisciplines of superconductivity. Tracing the historical developments in superconductivity, the book includes contributions from many pioneers who are responsible for important steps forward in the field.The text first discusses interesting stories of the discovery and gradual progress of theory and experimentation. Emphasizi

  12. Anisotropy of superconducting MgB2 as seen in electron spin resonance and magnetization data.

    Science.gov (United States)

    Simon, F; Jánossy, A; Fehér, T; Murányi, F; Garaj, S; Forró, L; Petrovic, C; Bud'ko, S L; Lapertot, G; Kogan, V G; Canfield, P C

    2001-07-23

    We observed the conduction electron spin resonance (CESR) in fine powders of MgB2 both in the superconducting and normal states. The Pauli susceptibility is chi(s) = 2.0 x 10(-5) emu/mole in the temperature range of 450 to 600 K. The spin relaxation rate has an anomalous temperature dependence. The CESR measured below T(c) at several frequencies suggests that MgB2 is a strongly anisotropic superconductor with the upper critical field, H(c2), ranging between 2 and 16 T. The high-field reversible magnetization data of a randomly oriented powder sample are well described assuming that MgB2 is an anisotropic superconductor with H(ab)(c2)/H(c)(c2) approximately 6-9.

  13. Strain and High Temperature Superconductivity: Unexpected Results from Direct Electronic Structure Measurements in Thin Films

    Science.gov (United States)

    Abrecht, M.; Ariosa, D.; Cloetta, D.; Mitrovic, S.; Onellion, M.; Xi, X.; Margaritondo, G.; Pavuna, D.

    2003-07-01

    Angle-resolved photoemission spectroscopy reveals very surprising strain-induced effects on the electronic band dispersion of epitaxial La2-xSrxCuO4-δ thin films. In strained films we measure a band that crosses the Fermi level (EF) well before the Brillouin zone boundary. This is in contrast to the flat band reported in unstrained single crystals and in our unstrained films, as well as in contrast to the band flattening predicted by band structure calculations for in-plane compressive strain. In spite of the density of states reduction near EF, the critical temperature increases in strained films with respect to unstrained samples. These results require a radical departure from commonly accepted notions about strain effects on high temperature superconductors, with possible general repercussions on superconductivity theory.

  14. Electron Spin Resonance at the Level of 1 04 Spins Using Low Impedance Superconducting Resonators

    Science.gov (United States)

    Eichler, C.; Sigillito, A. J.; Lyon, S. A.; Petta, J. R.

    2017-01-01

    We report on electron spin resonance measurements of phosphorus donors localized in a 200 μ m2 area below the inductive wire of a lumped element superconducting resonator. By combining quantum limited parametric amplification with a low impedance microwave resonator design, we are able to detect around 2 ×1 04 spins with a signal-to-noise ratio of 1 in a single shot. The 150 Hz coupling strength between the resonator field and individual spins is significantly larger than the 1-10 Hz coupling rates obtained with typical coplanar waveguide resonator designs. Because of the larger coupling rate, we find that spin relaxation is dominated by radiative decay into the resonator and dependent upon the spin-resonator detuning, as predicted by Purcell.

  15. Appropriate microwave frequency selection for biasing superconducting hot electron bolometers as terahertz direct detectors

    Science.gov (United States)

    Jiang, S. L.; Li, X. F.; Jia, X. Q.; Kang, L.; Jin, B. B.; Xu, W. W.; Chen, J.; Wu, P. H.

    2017-04-01

    Terahertz (THz) direct detectors based on superconducting niobium nitride (NbN) hot electron bolometers (HEBs) and biased by a simple microwave (MW) source have been studied. The frequency and power of the MW are selected by measuring the MW responses of the current–voltage (I–V) curves and resistance–temperature (R–T) curves of the NbN HEBs. The non-uniform absorption theory is used to explain the current jumps in the I–V curves and the resistance jumps in the R–T curves. Compared to the thermal biasing, the MW biasing method can improve the sensitivity, make the readout system much easier and consumes less liquid helium, which is important for long lasting experiments. The noise equivalent power (NEP) of 1.6 pW Hz‑1/2 and the response time of 86 ps are obtained for the detectors working at 4.2 K and 0.65 THz.

  16. Antenna-Coupled Superconducting Tunnel Junctions with Single-Electron Transistor Readout for Detection of Sub-mm Radiation

    Science.gov (United States)

    Stevenson, T. R.; Hsieh, W.-T.; Li, M. J.; Stahle, C. M.; Wollack, E. J.; Schoelkopf, R. J.; Teufel, J.; Krebs, Carolyn (Technical Monitor)

    2002-01-01

    Antenna-coupled superconducting tunnel junction detectors have the potential for photon-counting sensitivity at sub-mm wavelengths. The device consists of an antenna structure to couple radiation into a small superconducting volume and cause quasiparticle excitations, and a single-electron transistor to measure currents through tunnel junction contacts to the absorber volume. We will describe optimization of device parameters, and recent results on fabrication techniques for producing devices with high yield for detector arrays. We will also present modeling of expected saturation power levels, antenna coupling, and rf multiplexing schemes.

  17. Universal increase in the superconducting critical temperature of two-dimensional semiconductors at low doping by the electron-electron interaction.

    Science.gov (United States)

    Calandra, Matteo; Zoccante, Paolo; Mauri, Francesco

    2015-02-20

    In two-dimensional multivalley semiconductors, at low doping, even a moderate electron-electron interaction enhances the response to any perturbation inducing a valley polarization. If the valley polarization is due to the electron-phonon coupling, the electron-electron interaction results in an enhancement of the superconducting critical temperature. By performing first-principles calculations beyond density functional theory, we prove that this effect accounts for the unconventional doping dependence of the superconducting transition temperature (T(c)) and of the magnetic susceptibility measured in Li(x)ZrNCI. Finally, we discuss what are the conditions for a maximal T(c) enhancement in weakly doped two-dimensional semiconductors.

  18. European Power Electronic conference in Aalborg, Denmark - 1000 participants discussing the future energy technologies

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Munk-Nielsen, Stig

    2007-01-01

    The European Power Electronics and Adjustable Speed Drives conference with technical sponsorship of IEEE Industrial Electronic Society has been held in Aalborg, Denmark, during the first days of September 2007 with an overwhelming success and participation. It was hosted by Aalborg University......'s Institute of Energy Technology....

  19. Enhancement of superconductivity in NbN nanowires by negative electron-beam lithography with positive resist

    Science.gov (United States)

    Charaev, I.; Silbernagel, T.; Bachowsky, B.; Kuzmin, A.; Doerner, S.; Ilin, K.; Semenov, A.; Roditchev, D.; Vodolazov, D. Yu.; Siegel, M.

    2017-08-01

    We performed comparative experimental investigation of superconducting NbN nanowires which were prepared by means of positive- and negative electron-beam lithography with the same positive tone Poly-methyl-methacrylate (PMMA) resist. We show that nanowires with a thickness 4.9 nm and widths less than 100 nm demonstrate at 4.2 K higher critical temperature and higher density of critical and retrapping currents when they are prepared by negative lithography. Also the ratio of the experimental critical current to the depairing critical current is larger for nanowires prepared by negative lithography. We associate the observed enhancement of superconducting properties with the difference in the degree of damage that nanowire edges sustain in the lithographic process. A whole range of advantages which is offered by the negative lithography with positive PMMA resist ensures high potential of this technology for improving the performance metrics of superconducting nanowire singe-photon detectors.

  20. Superconducting energy recovery linacs

    Science.gov (United States)

    Ben-Zvi, Ilan

    2016-10-01

    High-average-power and high-brightness electron beams from a combination of laser photocathode electron guns and a superconducting energy recovery linac (ERL) is an emerging accelerator science with applications in ERL light sources, high repetition rate free electron lasers , electron cooling, electron ion colliders and more. This paper reviews the accelerator physics issues of superconducting ERLs, discusses major subsystems and provides a few examples of superconducting ERLs.

  1. Development of a 4.5 K Pulse Tube Cryocooler for Superconducting Electronics

    Science.gov (United States)

    Nast, Ted; Olson, Jeff; Champagne, Patrick; Mix, Jack; Evtimov, Bobby; Roth, Eric; Collaco, Andre

    2008-03-01

    Lockheed Martin's (LM) Advanced Technology Center (ATC) has developed a four stage pulse tube cryocooler (stirling-type pulse tube system) to provide cooling at 4.5 K for superconducting digital electronics communications programs. These programs utilize superconducting niobium integrated circuits [1, 2]. A prior ATC 4 stage unit has provided cooling to 3.8 K. [3] The relatively high cooling loads for the present program led us to a new design which improves the 4.5 K power efficiency over prior systems. This design includes a unique pulse tube approach using both He-3 and He-4 working gas in two compression spaces. The compressor utilizes our standard moving magnet linear motor, clearance seal and flexure bearing system. The system is compact, lightweight and reliable and utilizes our aerospace cooler technology to provide unlimited lifetime. The unit is a proof of concept, but the construction is at an engineering model level. Follow on activities for improvements of performance and more compact packaging and future production for ground based communication systems is anticipated. This paper presents the experimental results at various cooling conditions. Primary results are shown for HYPRES cooling requirements and data is also included at lower cooling loads that may be required for future space missions. The system provides a maximum of 42 mW @ 4.5 K and a no load temperature of 3 K. The majority of this work was subcontracted by HYPRES and funded by the Army and Navy. A small part of this effort to obtain data at lower cooling loads (1-10 mW @ 4.5 K) was funded by LM internal funds.

  2. Study of field-limiting defects in superconducting RF cavities for electron-accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Aderhold, Sebastian

    2015-02-15

    Superconducting radio-frequency resonators made from niobium are an integral part of many accelerator projects. Their main advantage are the low ohmic losses resulting in the possibility for a long pulse structure and high duty cycles up to continous wave (cw) operation. The European X-Ray Free-Electron Laser (XFEL) and the International Linear Collider (ILC) are based on this technology. In some cases the resonators reach accelerating electric fields close to the theoretical limit of bulk niobium. Yet most resonators are limited at lower fields and mass production for large scale accelerator projects suffers from the spread in the achievable gradient per resonator. The main limitations are field emission and the breakdown of superconductivity (quench). While field emission is mostly attributed to the overall surface cleanliness of the resonator, quench is usually associated with local defects. Optical inspection of the inner surface of the resonators with unprecedented resolution, accuracy and a special illumination has been established at DESY and used to study such local surface defects. More than 30 resonators have been inspected. Distinctive features from these inspections have been catalogued and assessed for their potential risk for the performance of the resonator. Several confirmed quenching defects could be extracted for further analysis and could be traced back to likely origins in the production process. A new, automated set-up for optical inspection of large series of resonators, named OBACHT, has been developed and successfully commissioned. Its design includes the minimal need for operator interference, reproducibility, robustness and versatility, in order to fit the requirements for application both in a laboratory and in a production environment. To facilitate the comparison of the results obtained during the global R and D effort on resonators for the ILC, the ILC global yield database has been established. The yield and selection rules for the

  3. Common electronic origin of superconductivity in (Li,Fe)OHFeSe bulk superconductor and single-layer FeSe/SrTiO3 films.

    Science.gov (United States)

    Zhao, Lin; Liang, Aiji; Yuan, Dongna; Hu, Yong; Liu, Defa; Huang, Jianwei; He, Shaolong; Shen, Bing; Xu, Yu; Liu, Xu; Yu, Li; Liu, Guodong; Zhou, Huaxue; Huang, Yulong; Dong, Xiaoli; Zhou, Fang; Liu, Kai; Lu, Zhongyi; Zhao, Zhongxian; Chen, Chuangtian; Xu, Zuyan; Zhou, X J

    2016-02-08

    The mechanism of high-temperature superconductivity in the iron-based superconductors remains an outstanding issue in condensed matter physics. The electronic structure plays an essential role in dictating superconductivity. Recent revelation of distinct electronic structure and high-temperature superconductivity in the single-layer FeSe/SrTiO3 films provides key information on the role of Fermi surface topology and interface in inducing or enhancing superconductivity. Here we report high-resolution angle-resolved photoemission measurements on the electronic structure and superconducting gap of an FeSe-based superconductor, (Li0.84Fe0.16)OHFe0.98Se, with a Tc at 41 K. We find that this single-phase bulk superconductor shows remarkably similar electronic behaviours to that of the superconducting single-layer FeSe/SrTiO3 films in terms of Fermi surface topology, band structure and the gap symmetry. These observations provide new insights in understanding high-temperature superconductivity in the single-layer FeSe/SrTiO3 films and the mechanism of superconductivity in the bulk iron-based superconductors.

  4. Analysis of the proximity function in electron-beam lithography on high-? superconducting thin-films

    Science.gov (United States)

    Gueorguiev, Y. M.; Vutova, K. G.; Mladenov, G. M.

    1996-07-01

    In this paper we approximate by the combination of double Gaussian and exponential functions the radial distributions of the absorbed electron energy density in a 125 nm PMMA resist layer on 0953-2048/9/7/009/img2 thin-film/substrate targets obtained by means of Monte Carlo simulation for a zero-width 0953-2048/9/7/009/img3-function and the following variables (i) the substrate material (0953-2048/9/7/009/img4 and MgO), (ii) the electron beam energy 0953-2048/9/7/009/img5 (25, 50 and 75 keV) and (iii) the 0953-2048/9/7/009/img2 film thickness d (0, 100, 200 and 300 nm). The values of the parameters of the analytical function are calculated using an original Monte Carlo technique. These values are presented in the form of 3D diagrams which show their dependences on beam energy and on high-temperature superconducting film thickness and can also be used for approximate determination of the parameters at different initial conditions.

  5. Electronic properties and superconductivity of rapidly quenched Al-Si alloys

    Energy Technology Data Exchange (ETDEWEB)

    Chevrier, J.; Pavuna, D.; Cyrot-Lackmann, F.

    1987-12-15

    We present detailed studies of electronic properties of Al-Si alloys prepared in a nonequilibrium state by means of rapid solidification. The quenched alloys exhibit an enhanced superconducting transition temperature up to 6.2 K in an Al--Si 30 at. % alloy as well as an increased thermal slope of resistivity. Using differential scanning calorimetry, a large enthalpy variation (..delta..H = 4.1 kJ/mole for Al--Si 30 at. %) has been measured during the irreversible transition from the non- equilibrium state to the equilibrium one. This is mainly attributed to the energy difference between the metallic state of silicon atoms trapped in fcc aluminum matrix during quenching and the usual covalent state of silicon precipitates in an equilibrium state. This large energy difference is presented as the origin of a lattice instability which softens the phonon spectrum and gives rise to a stronger electron-phonon coupling. This appears to be a characteristic property of nonequilibrium Al-Si solid solutions, which is associated with the metallic state of silicon atoms. An interpretation of the T/sub c/ enhancement is proposed for both Al-Si and Al-Ge alloys based on the phonon softening in these nonequilibrium crystalline alloys.

  6. In-situ electron paramagnetic resonance studies of paramagnetic point defects in superconducting microwave resonators

    Science.gov (United States)

    Zhang, Shengke; Kopas, Cameron; Wagner, Brian; Queen, Daniel; Newman, N.

    2016-09-01

    The physical nature and concentration of paramagnetic point defects in the dielectrics of superconducting planar microwave resonators have been determined using in-situ electron paramagnetic resonance spectroscopy. To perform this work, the quality factor of parallel plate and stripline resonators was measured as a function of the magnitude of a magnetic-field applied parallel to the electrode surfaces. YBa2Cu3O7-δ thin film electrodes proved to be a preferred choice over Nb and MgB2 because they are readily available and have a small surface resistance (Rs) up to high temperatures (˜77 K) and magnetic fields (i.e., dielectric, Co2+-doped Ba(Zn1/3Nb2/3)O3, are shown to have losses dominated by d-electron spin-excitations in exchange-coupled Co2+ point-defect clusters, even in the absence of an applied magnetic field. A significant enhanced microwave loss in stripline and parallel plate resonators is found to correlate with the presence of paramagnetic Mn2+ dopants in Ba(Zn1/3Ta2/3)O3 ceramics and dangling bond states in amorphous Si thin films, although the identification of the dominant loss mechanism(s) in these dielectrics requires further investigation.

  7. Proceedings of 2011 International Conference on Electronic Engineering, Communication and Management

    CERN Document Server

    Lin, Sally

    2012-01-01

      This volume presents the main results of 2011 International Conference on Electronic  Engineering, Communication and Management (EECM2011) held December 24-25, 2011, Beijing China. The EECM2011 is an integrated conference providing a valuable opportunity for researchers, scholars and scientists to exchange their ideas face to face together. The main focus of the EECM 2011 and the present 2 volumes “Advances in Electronic Engineering, Communication and Management” is on Power Engineering, Electrical engineering applications, Electrical machines, as well as Communication and Information Systems Engineering.

  8. Annealing condition dependence of the superconducting property and the pseudo-gap in the protect-annealed electron-doped cuprates

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Woo Been; Cho, Su Hyun; Kim, Chang Young [Center for Correlated Electron Systems, Institute for Basic Science, Seoul (Korea, Republic of); Song, Dong Joon [National Institute of Advanced Industrial Science and Technology, Tsukuba (Japan); Park, Seung Ryong [Dept. of Physics, Research Institute of Basic Sciences, Incheon National University, Incheon (Korea, Republic of)

    2016-06-15

    Annealing as-grown electron-doped cuprates under a low oxygen-partial-pressure condition is a necessary step to achieve superconductivity. It has been recently found that the so-called protect annealing results in much better superconducting properties in terms of the superconducting transition temperature and volume fraction. In this article, we report on angle-resolved photoemission spectroscopy studies of a protect-annealed electron-doped cuprate Pr0.9La1.0Ce0.1CuO4 on annealing condition dependent superconducting and pseudo-gap properties. Remarkably, we found that the one showing a better superconducting property possesses almost no pseudo-gap while others have strong pseudo-gap feature due to an anti-ferromagnetic order.

  9. 2nd Biennial Conference on Refrigeration for Cryogenic Sensors and Electronic Systems

    CERN Document Server

    1983-01-01

    This proceedings documents the output of the Second Biennial Conference on Refrigeration for Cryogenic Sensors and Electronic Systems held at the National Aeronautics and Space Administration's Goddard Space Flight Center, Greenbelt, Maryland, on December 7-8, 1982. Building on the first open meeting hosted by the National Bureau of Standards in 1980, the focus of this second meeting was again on low-temperature, closed-cycle cooler technology. However, higher temperature coolers (77 K), with technology applicable to the low temperature coolers, were considered to be within the scope of this meeting. This second conference consisted of 30 papers presented by representatives of industry, government, and academia. The conference proceedings reproduced here was published by the NASA Goddard Space Flight Center in Greenbelt Maryland as NASA Conference Publication 2287.

  10. Pressure-induced electronic phase separation of magnetism and superconductivity in CrAs.

    Science.gov (United States)

    Khasanov, Rustem; Guguchia, Zurab; Eremin, Ilya; Luetkens, Hubertus; Amato, Alex; Biswas, Pabitra K; Rüegg, Christian; Susner, Michael A; Sefat, Athena S; Zhigadlo, Nikolai D; Morenzoni, Elvezio

    2015-09-08

    The recent discovery of pressure (p) induced superconductivity in the binary helimagnet CrAs has raised questions on how superconductivity emerges from the magnetic state and on the mechanism of the superconducting pairing. In the present work the suppression of magnetism and the occurrence of superconductivity in CrAs were studied by means of muon spin rotation. The magnetism remains bulk up to p ≃ 3.5 kbar while its volume fraction gradually decreases with increasing pressure until it vanishes at p ≃ 7 kbar. At 3.5 kbar superconductivity abruptly appears with its maximum Tc ≃ 1.2 K which decreases upon increasing the pressure. In the intermediate pressure region (3.5 superconducting and the magnetic volume fractions are spatially phase separated and compete for phase volume. Our results indicate that the less conductive magnetic phase provides additional carriers (doping) to the superconducting parts of the CrAs sample thus leading to an increase of the transition temperature (Tc) and of the superfluid density (ρs). A scaling of ρs with Tc(3.2) as well as the phase separation between magnetism and superconductivity point to a conventional mechanism of the Cooper-pairing in CrAs.

  11. NbN superconducting nanonetwork fabricated using porous silicon templates and high-resolution electron beam lithography.

    Science.gov (United States)

    Salvato, Matteo; Baghdadi, Reza; Cirillo, Carla; Prischepa, Serghej L; Dolgiy, Alexey; Bondarenko, Vitaly; Lombardi, Floriana; Attanasio, Carmine

    2017-08-07

    Superconducting NbN nanonetworks with a very small number of interconnected nanowires, with diameter of the order of 4 nm, are fabricated combining a bottom-up (use of porous silicon nanotemplates) with a top-down technique (high-resolution electron beam lithography). The method is easy to control and allows to fabricate, on a robust support, devices with electrical properties close to a one-dimensional superconductor that can be fruitfully used for novel applications. © 2017 IOP Publishing Ltd.

  12. Feasibility study for an industrial superconducting table-top electron accelerator; Machbarkeitstudie fuer einen industriellen supraleitenden Table Top Elektronenbeschleuniger

    Energy Technology Data Exchange (ETDEWEB)

    Buettig, H.; Enghardt, W.; Gabriel, F.; Janssen, D.; Michel, P.; Pobell, F.; Prade, H.; Schneider, C.; Kudryavtsev, A.; Haberstroh, C.; Sandner, W.; Will, I.

    2004-07-01

    A concept of a table-top accelerator, consisting of a superconducting resonator and subsequent 6 standard TESLA cells working with a frequency of 1.3 GHz, is presented. Then electron gun is based on a photocathode. Especially described are the photocathode part, the laser system, the cryostat module, the RF system, the beam extraction, and the cryogenic facility. Finally the efficiency and the costs are considered, (HSI)

  13. XI Scientific Conference Selected Issues of Electrical Engineering and Electronics (WZEE)

    CERN Document Server

    Mazur, Damian; Analysis and Simulation of Electrical and Computer Systems

    2015-01-01

    This book presents the selected results of the XI Scientific Conference Selected Issues of Electrical Engineering and Electronics (WZEE) which was held in Rzeszów and Czarna, Poland on September 27-30, 2013. The main aim of the Conference was to provide academia and industry to discuss and present the latest technological advantages and research results and to integrate the new interdisciplinary scientific circle in the field of electrical engineering, electronics and mechatronics. The Conference was organized by the Rzeszów Division of Polish Association of Theoretical and Applied Electrical Engineering (PTETiS) in cooperation with Rzeszów University of Technology, the Faculty of Electrical and Computer Engineering and Rzeszów University, the Faculty of Mathematics and Natural Sciences.  

  14. Superconducting thin films of BiSrCaCuO made by sequential electron beam evaporation

    Energy Technology Data Exchange (ETDEWEB)

    Steinbeck, J.; Anderson, A.C.; Tsauer, B.Y.; Strauss, A.J.

    1989-03-01

    Superconducting thin films of Bi/sub 2/Sr/sub 2/Ca/sub 1/Cu/sub 2/O/sub x/ have been made by sequential electron-beam evaporation of multiple layers of Bi and Cu metals and (Sr,Ca)F/sub 2/ on MgO substrates. The films were annealed at high temperature, first in wet O/sub 2/ and then in dry O/sub 2/, and cooled to room temperature in dry O/sub 2/. The resulting films which are -- 1 ..mu..m thick, have transition temperatures of -- 85 K. X-ray diffraction shows that the films are preferentially oriented with their c-axis perpendicular to the MgO substrate. The authors' best film has a zero-resistance temperature of 90 K and critical current densities of 8 x 10/sup 4/ A/cm/sup 2/ at 77 K and 2.5 x 10/sup 5/ A/cm/sup 2/ at 4.2 K.

  15. First results from the new RIKEN superconducting electron cyclotron resonance ion source (invited).

    Science.gov (United States)

    Nakagawa, T; Higurashi, Y; Ohnishi, J; Aihara, T; Tamura, M; Uchiyama, A; Okuno, H; Kusaka, K; Kidera, M; Ikezawa, E; Fujimaki, M; Sato, Y; Watanabe, Y; Komiyama, M; Kase, M; Goto, A; Kamigaito, O; Yano, Y

    2010-02-01

    The next generation heavy ion accelerator facility, such as the RIKEN radio isotope (RI) beam factory, requires an intense beam of high charged heavy ions. In the past decade, performance of the electron cyclotron resonance (ECR) ion sources has been dramatically improved with increasing the magnetic field and rf frequency to enhance the density and confinement time of plasma. Furthermore, the effects of the key parameters (magnetic field configuration, gas pressure, etc.) on the ECR plasma have been revealed. Such basic studies give us how to optimize the ion source structure. Based on these studies and modern superconducting (SC) technology, we successfully constructed the new 28 GHz SC-ECRIS, which has a flexible magnetic field configuration to enlarge the ECR zone and to optimize the field gradient at ECR point. Using it, we investigated the effect of ECR zone size, magnetic field configuration, and biased disk on the beam intensity of the highly charged heavy ions with 18 GHz microwaves. In this article, we present the structure of the ion source and first experimental results with 18 GHz microwave in detail.

  16. Superconducting single electron transistor for charge sensing in Si/SiGe-based quantum dots

    Science.gov (United States)

    Yang, Zhen

    Si-based quantum devices, including Si/SiGe quantum dots (QD), are promising candidates for spin-based quantum bits (quits), which are a potential platform for quantum information processing. Meanwhile, qubit readout remains a challenging task related to semiconductor-based quantum computation. This thesis describes two readout devices for Si/SiGe QDs and the techniques for developing them from a traditional single electron transistor (SET). By embedding an SET in a tank circuit and operating it in the radio-frequency (RF) regime, a superconducting RF-SET has quick response as well as ultra high charge sensitivity and can be an excellent charge sensor for the QDs. We demonstrate such RF-SETs for QDs in a Si/SiGe heterostructure. Characterization of the SET in magnetic fields is studied for future exploration of advanced techniques such as spin detection and spin state manipulation. By replacing the tank circuit with a high-quality-factor microwave cavity, the embedded SET will be operated in the supercurrent regime as a single Cooper pair transistor (CPT) to further increase the charge sensitivity and reduce any dissipation. The operating principle and implementation of the cavity-embedded CPT (cCPT) will be introduced.

  17. Phase Diagram and Electronic Properties of High-Tc Superconducting Oxides

    Science.gov (United States)

    Pavuna, Davor

    We firstly briefly summarize some of the most relevant recent results and open questions across rather complex electronic phase diagram of cuprates. We continue with a discussion of results on thin superconducting oxide films grown by laser ablation. Systematic studies show that BSCCO-phases and LSCO-214 exhibit conductor-like Fermi edge, whereas materials containing "chains" (like YBCO-123) are prone to very rapid surface degradation, most likely related to critical oxygen loss at the outermost layers. Recently, direct ARPES dispersion measurements on in-situ grown, strained 10UC thin LSCO-214 films (Tc = 44 K) have shown the band crossing of Fermi level well before the Brillouin zone boundary. This is in contrast to the flat band observed in unstrained single crystals — and to the band flattening predicted by band calculations for in-plane compressive strain. In spite of density of states reduction near the Fermi level, the critical temperature increases in strained films with respect to unstrained crystals; this poses further challenge to HTSC theory.

  18. Recent development of RIKEN 28 GHz superconducting electron cyclotron resonance ion source

    Energy Technology Data Exchange (ETDEWEB)

    Higurashi, Y., E-mail: higurasi@riken.jp; Ohnishi, J.; Ozeki, K.; Kidera, M.; Nakagawa, T. [RIKEN, 2-1 Hirosawa, Wako, Saitama (Japan)

    2014-02-15

    Over the past two years, we have tried to improve the performance of the RIKEN superconducting electron cyclotron resonance ion source using several methods. For the production of U vapor, we chose the sputtering method because it is possible to install a large amount of material inside the plasma chamber and thus achieve long-term operation without a break, although it is assumed that the beam intensity is weaker than in the oven technique. We also used an aluminum chamber instead of a stainless steel one. Using these methods, we successfully produced ∼180 eμA of U{sup 35+} and ∼230 eμA of U{sup 33+} at the injected radio frequency (RF) power of ∼4 kW (28 GHz). Very recently, to further increase the beam intensity of U{sup 35+}, we have started to develop a high temperature oven and have successfully produced a highly charged U ion beam. In this contribution, we report on the beam intensity of highly charged U ions as a function of various parameters (RF power and sputtering voltage) and discuss the effects of these parameters on the beam stability in detail.

  19. Green development within product families, Electronics goes green 2000+ conference

    DEFF Research Database (Denmark)

    Lenau, Torben Anker; Willum, Ole; Frees, Niels

    2001-01-01

    , based on environ-mental and economical importance as well as the existence of several producers. Using this method, five families have been selected, namely mobile phones, vacuum cleaners, industrial valves with electronic controls, lighting and ventilation. Collaboration with 5 industrial companies has...

  20. High density processing electronics for superconducting tunnel junction x-ray detector arrays

    Energy Technology Data Exchange (ETDEWEB)

    Warburton, W.K., E-mail: bill@xia.com [XIA LLC, 31057 Genstar Road, Hayward, CA 94544 (United States); Harris, J.T. [XIA LLC, 31057 Genstar Road, Hayward, CA 94544 (United States); Friedrich, S. [Lawrence Livermore National Laboratory, Livermore, CA 94550 (United States)

    2015-06-01

    Superconducting tunnel junctions (STJs) are excellent soft x-ray (100–2000 eV) detectors, particularly for synchrotron applications, because of their ability to obtain energy resolutions below 10 eV at count rates approaching 10 kcps. In order to achieve useful solid detection angles with these very small detectors, they are typically deployed in large arrays – currently with 100+ elements, but with 1000 elements being contemplated. In this paper we review a 5-year effort to develop compact, computer controlled low-noise processing electronics for STJ detector arrays, focusing on the major issues encountered and our solutions to them. Of particular interest are our preamplifier design, which can set the STJ operating points under computer control and achieve 2.7 eV energy resolution; our low noise power supply, which produces only 2 nV/√Hz noise at the preamplifier's critical cascode node; our digital processing card that digitizes and digitally processes 32 channels; and an STJ I–V curve scanning algorithm that computes noise as a function of offset voltage, allowing an optimum operating point to be easily selected. With 32 preamplifiers laid out on a custom 3U EuroCard, and the 32 channel digital card in a 3U PXI card format, electronics for a 128 channel array occupy only two small chassis, each the size of a National Instruments 5-slot PXI crate, and allow full array control with simple extensions of existing beam line data collection packages.

  1. LEP : the Large Electron Positron Collider Conference MT17

    CERN Multimedia

    2001-01-01

    LEP was CERN's flagship research facility from 1989 until 2000 when it stepped aside to make way for installation of the Laboratory's next major accelerator, the Large Hadron Collider, LHC. With a circumference of 27 kilometres, LEP was the largest circular particle collider in the world. Inside its beam pipe, about 100 metres underground, bunches of electrons and positrons raced around in opposite directions as they were accelerated to almost the speed of light. In its first phase of operation, LEP was designed to collide electrons and positrons at an energy of around 100 GeV. After some seven years of accumulating data at this energy to study the Z particle - electrically neutral carrier of the weak interaction - everything was done to boost the energy of LEP's beams as high as possible.

  2. Elimination of bubbles and improvement of the superconducting properties in MgB2 films annealed using electron beam

    Science.gov (United States)

    Xu, Zhuang; Kong, Xiangdong; Han, Li; Pang, Hua; Wu, Yue; Gao, Zhaoshun; Li, Xiaona

    2017-03-01

    MgB2 superconducting films can be readily obtained using the electron-beam annealing method. However, many bubbles existing in the film severely damage the surface morphology, which is known as the deleterious current-limiting mechanism. Based on morphology images and energy-dispersive spectroscopy spectra, we found that, during the annealing process, solid Mg-rich layers evaporate to form Mg vapour in the precursor film, resulting in bubbles in the film. By reducing the cycle thickness of the precursor film, we obtained MgB2 films with better properties. The root-mean-square surface roughness was 2.7 nm over a 10 × 10 μm area for a 100 nm-thick film, and the critical current density at 20 K was increased to 3.8 × 106 A cm‑2. These MgB2 films are suitable for fabricating MgB2 superconducting devices.

  3. Electronic structure of a superconducting topological insulator Sr-doped Bi{sub 2}Se{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Han, C. Q.; Chen, W. J.; Zhu, Fengfeng; Yao, Meng-Yu [Key Laboratory of Artificial Structures and Quantum Control (Ministry of Education), Department of Physics and Astronomy, Shanghai Jiao Tong University, Shanghai 200240 (China); Li, H.; Li, Z. J.; Wang, M.; Gao, Bo F., E-mail: bo-f-gao@mail.sim.ac.cn [Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Science, Shanghai 200050 (China); Guan, D. D.; Liu, Canhua; Qian, Dong, E-mail: dqian@sjtu.edu.cn; Jia, Jin-Feng [Key Laboratory of Artificial Structures and Quantum Control (Ministry of Education), Department of Physics and Astronomy, Shanghai Jiao Tong University, Shanghai 200240 (China); Collaborative Innovation Center of Advanced Microstructures, Nanjing 210093 (China); Gao, C. L. [Key Laboratory of Artificial Structures and Quantum Control (Ministry of Education), Department of Physics and Astronomy, Shanghai Jiao Tong University, Shanghai 200240 (China); Collaborative Innovation Center of Advanced Microstructures, Nanjing 210093 (China); Department of Physics, Fudan University, Shanghai 200433 (China)

    2015-10-26

    Using high-resolution angle-resolved photoemission spectroscopy and scanning tunneling microscopy/spectroscopy, the atomic and low energy electronic structure of the Sr-doped superconducting topological insulators (Sr{sub x}Bi{sub 2}Se{sub 3}) was studied. Scanning tunneling microscopy shows that most of the Sr atoms are not in the van der Waals gap. After Sr doping, the Fermi level was found to move further upwards when compared with the parent compound Bi{sub 2}Se{sub 3}, which is consistent with the low carrier density in this system. The topological surface state was clearly observed, and the position of the Dirac point was determined in all doped samples. The surface state is well separated from the bulk conduction bands in the momentum space. The persistence of separated topological surface state combined with small Fermi energy makes this superconducting material a very promising candidate for the time reversal invariant topological superconductor.

  4. Status of the Development of Superconducting Undulators for Storage Rings and Free Electron Lasers at the Advanced Photon Source

    Energy Technology Data Exchange (ETDEWEB)

    Ivanyushenkov, Y.; Doose, C.; Fuerst, J.; Harkay, K.; Hasse, Q.; Kasa, M.; Shiroyanagi, Y.; Skiadopoulos, D.; Trakhtenberg, E.; Gluskin, E.; Emma, P.

    2017-06-01

    Development of superconducting undulator (SCU) technology continues at the Advanced Photon Source (APS). The experience of building and successful operating the first short-length, 16-mm period length superconducting undulator SCU0 paved the way for a 1-m long, 18-mm period device— SCU18-1— which has been in operation since May 2015. The APS SCU team has also built and tested a 1.5-m long, 21-mm period length undulator as a part of the LCLS SCU R&D program, aimed at demonstration of SCU technology availability for free electron lasers. This undulator successfully achieved all the requirements including a phase error of 5° RMS. Our team has recently completed one more 1-m long, 18-mm period length undulator— SCU18-2— that is replacing the SCU0. We are also working on a helical SCU for the APS. The status of these projects will be presented.

  5. Chemistry of electronic ceramic materials. Proceedings of the International Conference on the Chemistry of Electronic Ceramic Materials

    Science.gov (United States)

    Davies, P. K.; Roth, R. S.

    1991-01-01

    The conference was held at Jackson Hole, Wyoming from August 17 to 22, 1990, and in an attempt to maximize the development of this rapidly moving, multidisciplinary field, this conference brought together major national and international researchers to bridge the gap between those primarily interested in the pure chemistry of inorganic solids and those interested in the physical and electronic properties of ceramics. With the many major discoveries that have occurred over the last decade, one of the goals of this meeting was to evaluate the current understanding of the chemistry of electronic ceramic materials, and to assess the state of a field that has become one of the most important areas of advanced materials research. The topics covered include: crystal chemistry; dielectric ceramics; low temperature synthesis and characterization; solid state synthesis and characterization; surface chemistry; superconductors; theory and modeling.

  6. Development of 1.5 THz waveguide NbTiN superconducting hot electron bolometer mixers

    Energy Technology Data Exchange (ETDEWEB)

    Jiang Ling [College of Information Science and Technology, Nanjing Forestry University, 159 Longpan Road, Nanjing 210037, Jiangsu (China); Shiba, Shoichi; Shiino, Tatsuya; Shimbo, Ken; Sakai, Nami; Yamamoto, Satoshi [Department of Physics, The University of Tokyo, Hongo 7-3-1, Tokyo 113-0033 (Japan); Yamakura, Tetsuya [Department of Physics, Graduate School of Pure and Applied Sciences, University of Tsukuba (Japan); Irimajiri, Yoshihisa [National Institute of Information and Communications Technology (Japan); Ananthasubramanian, P G [Raman Research Institute, Bangalore (India); Maezawa, Hiroyuki, E-mail: lingjiang616@hotmail.co [Solar-Terrestrial Environment Laboratory, Nagoya University (Japan)

    2010-04-15

    We present a characterization of a 1.5 THz waveguide niobium titanium nitride (NbTiN) superconducting hot electron bolometer (HEB) mixer which can be pumped by a commercial solid state tunable local oscillator (LO) source. The NbTiN HEB mixer is made from a 12 nm thick NbTiN thin film deposited on a quartz substrate at room temperature. A gold electrode is formed in situ on the NbTiN thin film without breaking vacuum to ensure good contact. The uncorrected DSB receiver noise temperature is measured to be 1700 K at 1.5 THz, whereas the mixer noise temperature is derived to be 1000 K after corrections for losses of the input optics and the intermediate frequency (IF) amplifier chain. The required LO power absorbed in the HEB mixer is evaluated to be 340 nW by using an isothermal technique. The IF gain bandwidth is supposed to be about 1.3 GHz or higher. The present results show that good performance can be obtained at 1.5 THz even with a relatively thick NbTiN film (12 nm), as in the case of 0.8 THz. In order to investigate the cooling mechanism of our HEB mixers, we have conducted performance measurements for a few HEB mixers with different microbridge sizes both at 1.5 and 0.8 THz. The noise performance of the NbTiN HEB mixers is found to depend on the length of the NbTiN microbridge. The shorter the microbridge is, the lower the receiver noise temperature is. This may imply a contribution of the diffusion cooling in addition to the phonon cooling.

  7. PREFACE: XXVIII International Conference on Photonic, Electronic and Atomic Collisions (ICPEAC 2013)

    Science.gov (United States)

    Xiao, Guoqing; Cai, Xiaohong; Ding, Dajun; Ma, Xinwen; Zhao, Yongtao

    2014-04-01

    The 28th International Conference on Photonic, Electronic and Atomic Collisions (XXVIII ICPEAC) was held by the Institute of Modern Physics, Chinese Academy of Sciences (IMP) on 24-30 July, 2013 in Lanzhou, China. The 444 conference participants came from 37 countries and/or regions. Five plenary lectures, more than 80 progress reports and special reports had been arranged according to the decision of the ICPEAC International General Committee. Meanwhile, more than 650 abstracts were selected as poster presentations. Before the conference, three highly distinguished scientists, Professor Joachim Burgdöorfer, Professor Hossein Sadeghpour and Professor Yasunori Yamazaki, presented tutorial lectures with the support of the IMP Branch of Youth Innovation Promotion Association, CAS (IMP-YIPA). During the conference, Professor Jianwei Pan from University of Sciences and Technology in China presented an enlightening public lecture on quantum communication. Furthermore, 2013 IUPAP Young Scientist Prize was awarded to Dr T Jahnke from Johann Wolfgang Goethe University of Germany. The Sheldon Datz Prize for an Outstanding Young Scientist Attending ICPEAC was awarded to Dr Diogo Almeida from University of Fribourg of Switzerland. As a biannual academic conference, ICPEAC is one of the most important international conferences on atomic and molecular physics. The topic of the conference covers the recent progresses in photonic, electronic, atomic, ionic, molecular, cluster collisions with matter. With a history back to 1958, ICPEAC came to China for the very first time. IMP has been preparing the conference six years before, ever since the ICPEAC International General Committee made the decision to hold the XXVIII ICPEAC in Lanzhou. This proceedings includes the papers of the two plenary lectures, 40 progress reports, 17 special reports and 337 posters, which were reviewed and revised according to the comments of the referees. The Local Organizing Committee would like to

  8. International Conference on Harmonisation; guidance on electronic common technical document specification; availability. Notice.

    Science.gov (United States)

    2003-04-02

    The Food and Drug Administration (FDA) is announcing the availability of a guidance entitled "M2 eCTD: Electronic Common Technical Document Specification." The guidance was prepared under the auspices of the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH). The guidance defines the means for industry-to-agency transfer of regulatory information that will facilitate the creation, review, life cycle management, and archiving of the electronic submission. The guidance is intended to assist industry in transferring electronically their marketing applications for human drug and biological products to a regulatory authority.

  9. Structural, electronic, elastic and superconducting properties of noble metal nitrides MN{sub 2} (M = Ru, Rh, Pd)

    Energy Technology Data Exchange (ETDEWEB)

    Puvaneswari, S. [Department of Physics, E.M.G. Yadava Women' s College, Madurai, Tamilnadu 625 014 (India); Rajeswarapalanichamy, R., E-mail: rrpcaspd2003@gmail.com [Department of Physics, N.M.S.S. Vellaichamy Nadar College, Madurai, Tamilnadu 625019 (India); Sudha Priyanga, G. [Department of Physics, N.M.S.S. Vellaichamy Nadar College, Madurai, Tamilnadu 625019 (India)

    2015-02-01

    The structural stability, electronic structure, elastic and superconducting properties of noble metal nitrides MN{sub 2} (M = Ru, Rh, Pd) are investigated in tetragonal (P4/mbm), fluorite (Fm3m), orthorhombic (Pnnm), pyrite (Pa-3) and hexagonal (P6/mmm) phases using first principles calculations. The calculated lattice parameters are in good agreement with other theoretical results. Among the considered structures, RhN{sub 2} and PdN{sub 2} are found to be most stable in tetragonal structure, whereas RuN{sub 2} is stable in fluorite structure. A sequence of structural phase transition is predicted under high pressure in these metal nitrides. The electronic structure reveals that these nitrides are metallic. These metal nitrides are found to be covalent, ionic and metallic in the stable phase. The observations show that these metal nitrides are mechanically stable at ambient condition. The superconducting transition temperatures for RuN{sub 2}, RhN{sub 2} and PdN{sub 2} are found to be 1.65 K, 5.01 K and 8.7 K respectively. - Highlights: • Electronic, structural and elastic properties of RuN{sub 2}, RhN{sub 2} and PdN{sub 2} are studied. • A pressure induced structural phase transition is predicted. • Electronic structure reveals that these materials exhibit metallic behavior. • High bulk modulus indicates that RuN{sub 2}, RhN{sub 2} and PdN{sub 2} are superhard materials. • Superconducting temperature values are reported.

  10. Empirical understanding of superconducting critical temperature based on valence electron parameters

    Energy Technology Data Exchange (ETDEWEB)

    Makino, Yukio, E-mail: ymak@kuchem.kyoto-u.ac.jp; Yoshimura, Kazuyoshi

    2014-04-15

    Highlights: • Concave triangle-like relation is shown between T{sub c}/N(atom) and electronegativity. • Maximum T{sub c} (or T{sub c}/N(atom)) is obtained at around the threshold electronegativity. • T{sub c} value can be empirically estimated by the linear equation of N(ν)r(eff){sup 3}. • Enhancement of sp{sup 2}d{sup 2}-hybridization is the important factor to attain higher T{sub c} value. - Abstract: It is tried to empirically understand the superconducting critical temperature T{sub c} of various materials (24 elements, 286 A{sub n}B (n = 1, 2, 3) compounds, 34 Fe- and 49 Cu-based compounds) by the effective pseudopotential radius, r(eff), and the effective orbital electronegativity, χ(eff)(=[N(v)/r(eff)]{sup 1/2}). By giving the sets of values of r(eff) and the number of effective electron, N(v), for 65 elements under the assumption that both the hybridization state and N(v) can be assigned to 65 elements in advance by considering their electronic characters, the T{sub c}/N(atom)–χ(eff) and T{sub c}–N(v)r(eff){sup 3} relations are examined, where N(atom) is the number of atom in compounds. It is found that a convex triangle-like relation is obtained between T{sub c}/N(atom) and χ(eff) and the maximum of T{sub c}/N(atom) is observed at around the threshold χ(eff) corresponding to metal–semiconductor transition. The cuprates and Fe-compounds with the χ(eff) closer to the threshold value show the higher T{sub c} value. Applying the linear relation between T{sub c} and N(v)r(eff){sup 3} empirically obtained for the elements to the compounds, it is indicated that about two-thirds of A{sub n}B compounds as well as the Fe- and Cu-based compounds are well placed along the linear relation. These results allow us to estimate the T{sub c} value in compound materials empirically based on the effective pseudopotential radius determined by the assumed hybridization.

  11. The Preparation and Properties of Niobium Superconducting Structures Prepared by Electron Beam Evaporation in Uhv

    Science.gov (United States)

    Goodchild, Martin S.

    Available from UMI in association with The British Library. This work has achieved the development of a fabrication method for the realisation of superconductor-insulator -superconductor (SIS) junctions based on niobium thin films with an artificial barrier layer. Such devices are likely to have advantages over lead alloy devices because of the enhanced mechanical and chemical stability. A principal objective was to attempt to exploit the offset mask technology developed by Dolan that has been successfully employed by Davies et.al. in the realisation of lead alloy SIS junction heterodyne mixers. In order to transfer this technology to niobium based devices it is essential that an evaporation method is used to allow shadow formation beneath the offset mask. As a result of the chemical reactivity and the low vapour pressure of niobium, a UHV system has been developed which incorporates an electrostatically focussed electron beam evaporation source. This is capable of providing deposition rates of close to 10A/sec. with a source to substrate distance of 120mm. During deposition the system pressure is below 5 times 10 ^{-9} mbar. These process parameters have been recorded, for a number of depositions, on a specially built data acquisition system controlled by a BBC microcomputer. Such recording allows detailed comparison of conditions which helps in the understanding of differences between the superconducting behaviour of various films. A further extremely important aspect of these real time measurements is that it helps to ensure optimum settings of the focus conditions of the electron beam source. The results of the depositions are extremely encouraging with critical temperatures of between 9.1 and 9.3K being achieved. These results compare well with expected values for bulk niobium. An all-metal offset mask technology has been developed to replace the photo-resist technique pioneered by Dolan. This new method is needed because the photo-resist is not compatible

  12. Superconductivity in transition metals.

    Science.gov (United States)

    Slocombe, Daniel R; Kuznetsov, Vladimir L; Grochala, Wojciech; Williams, Robert J P; Edwards, Peter P

    2015-03-13

    A qualitative account of the occurrence and magnitude of superconductivity in the transition metals is presented, with a primary emphasis on elements of the first row. Correlations of the important parameters of the Bardeen-Cooper-Schrieffer theory of superconductivity are highlighted with respect to the number of d-shell electrons per atom of the transition elements. The relation between the systematics of superconductivity in the transition metals and the periodic table high-lights the importance of short-range or chemical bonding on the remarkable natural phenomenon of superconductivity in the chemical elements. A relationship between superconductivity and lattice instability appears naturally as a balance and competition between localized covalent bonding and so-called broken covalency, which favours d-electron delocalization and superconductivity. In this manner, the systematics of superconductivity and various other physical properties of the transition elements are related and unified.

  13. Mapping Dimensionality and Directionality of Electronic Behavior in CeCoIn5: the Superconducting State

    Science.gov (United States)

    Feldman, Benjamin E.; Gyenis, Andras; Randeria, Mallika T.; Peterson, Gabriel A.; Aynajian, Pegor; Bauer, Eric D.; Yazdani, Ali

    Unconventional superconductors often exhibit anisotropic physical properties that arise from the directional dependence of their order parameters. A prime example is CeCoIn5, a heavy fermion d-wave superconductor with a rich low-temperature phase diagram consisting of competing and coexisting magnetic and superconducting orders. Here we present dilution refrigerator scanning tunneling microscopy of CeCoIn5 cleaved perpendicular to its basal plane. We study superconductivity on the (100) surface, whose normal vector points along the antinode of the superconducting energy gap. The gap magnitude is similar to that observed in the basal plane, with a key difference: it does not exhibit any suppression near step edges. Application of a magnetic field along the [100] direction leads to the formation of anisotropic vortices, and the vortex lattice undergoes a transition at high field before the superconducting state gives way to a pseudogap phase. Our measurements illustrate the directional dependence of the superconducting properties in CeCoIn5, and more generally, demonstrate the utility of imaging d-wave superconductors along their nodal and antinodal directions.

  14. High-field superconductivity at an electronic topological transition in URhGe

    Science.gov (United States)

    Yelland, E. A.; Barraclough, J. M.; Wang, W.; Kamenev, K. V.; Huxley, A. D.

    2011-11-01

    The emergence of superconductivity at high magnetic fields in URhGe is regarded as a paradigm for new state formation approaching a quantum critical point. Until now, a divergence of the quasiparticle mass at the metamagnetic transition was considered essential for superconductivity to survive at magnetic fields above 30T. Here we report the observation of quantum oscillations in URhGe revealing a tiny pocket of heavy quasiparticles that shrinks continuously with increasing magnetic field, and finally disappears at a topological Fermi surface transition close to or at the metamagnetic field. The quasiparticle mass decreases and remains finite, implying that the Fermi velocity vanishes due to the collapse of the Fermi wavevector. This offers a novel explanation for the re-emergence of superconductivity at extreme magnetic fields and makes URhGe the first proven example of a material where magnetic field-tuning of the Fermi surface, rather than quantum criticality alone, governs quantum phase formation.

  15. 2010 Electron Donor-Acceptor Interactions Gordon Research Conference, August 8 - 13, 2010.

    Energy Technology Data Exchange (ETDEWEB)

    Gerald Meyer

    2010-08-18

    The Gordon Research Conference on Electron Donor Acceptor Interactions (GRC EDAI) presents and advances the current frontiers in experimental and theoretical studies of Electron Transfer Processes and Energy Conversion. The fundamental concepts underpinning the field of electron transfer and charge transport phenomena are understood, but fascinating experimental discoveries and novel applications based on charge transfer processes are expanding the discipline. Simultaneously, global challenges for development of viable and economical alternative energy resources, on which many researchers in the field focus their efforts, are now the subject of daily news headlines. Enduring themes of this conference relate to photosynthesis, both natural and artificial, and solar energy conversion. More recent developments include molecular electronics, optical switches, and nanoscale charge transport structures of both natural (biological) and man-made origin. The GRC EDAI is one of the major international meetings advancing this field, and is one of the few scientific meetings where fundamental research in solar energy conversion has a leading voice. The program includes sessions on coupled electron transfers, molecular solar energy conversion, biological and biomimetic systems, spin effects, ultrafast reactions and technical frontiers as well as electron transport in single molecules and devices. In addition to disseminating the latest advances in the field of electron transfer processes, the conference is an excellent forum for scientists from different disciplines to meet and initiate new directions; for scientists from different countries to make contacts; for young scientists to network and establish personal contacts with other young scientists and with established scientists who, otherwise, might not have the time to meet young people. The EDAI GRC also features an interactive atmosphere with lively poster sessions, a few of which are selected for oral presentations.

  16. PREFACE: XXIX International Conference on Photonic, Electronic, and Atomic Collisions (ICPEAC2015)

    Science.gov (United States)

    Díaz, C.; Rabadán, I.; García, G.; Méndez, L.; Martín, F.

    2015-09-01

    The 29th International Conference on Photonic, Electronic and Atomic Collisions (XXIX ICPEAC) was held at the Palacio de Congresos ''El Greco'', Toledo, Spain, on 22-28 July, 2015, and was organized by the Universidad Autónoma de Madrid (UAM) and the Consejo Superior de Investigaciones Científicas (CSIC). ICPEAC is held biannually and is one of the most important international conferences on atomic and molecular physics. The topic of the conference covers the recent progresses in photonic, electronic, and atomic collisions with matter. With a history back to 1958, ICPEAC came to Spain in 2015 for the very first time. UAM and CSIC had been preparing the conference for six years, ever since the ICPEAC International General Committee made the decision to hold the XXIX ICPEAC in Toledo. The conference gathered 670 participants from 52 countries and attracted 854 contributed papers for presentation in poster sessions. Among the latter, 754 are presented in issues 2-12 of this volume of the Journal of Physics Conference Series. In addition, five plenary lectures, including the opening one by the Nobel laureate Prof. Ahmed H. Zewail and the lectures by Prof. Maciej Lewenstein, Prof. Paul Scheier, Prof. Philip H. Bucksbaum, and Prof. Stephen J. Buckman, 62 progress reports and 26 special reports were presented following the decision of the ICPEAC International General Committee. Detailed write-ups of most of the latter are presented in issue 1 of this volume, constituting a comprehensive tangible record of the meeting. On the occasion of the International Year of Light (IYL2015) and with the support of the Fundación Española para la Ciencia y la Tecnología (FECYT), the program was completed with two public lectures delivered by the Nobel laureate Prof. Serge Haroche and the Príncipe de Asturias laureate Prof. Pedro M. Echenique on, respectively, ''Fifty years of laser revolutions in physics'rquot; and ''The sublime usefulness of useless science''. Also a

  17. Electronic Correlations, Jahn-Teller Distortions and Mott Transition to Superconductivity in Alkali-C60 Compounds

    Directory of Open Access Journals (Sweden)

    Alloul H.

    2012-03-01

    Full Text Available The discovery in 1991 of high temperature superconductivity (SC in A3C60 compounds, where A is an alkali ion, has been rapidly ascribed to a BCS mechanism, in which the pairing is mediated by on ball optical phonon modes. While this has lead to consider that electronic correlations were not important in these compounds, further studies of various AnC60 with n=1, 2, 4 allowed to evidence that their electronic properties cannot be explained by a simple progressive band filling of the C60 six-fold degenerate t1u molecular level. This could only be ascribed to the simultaneous influence of electron correlations and Jahn-Teller Distortions (JTD of the C60 ball, which energetically favour evenly charged C60 molecules. This is underlined by the recent discovery of two expanded fulleride Cs3C60 isomeric phases which are Mott insulators at ambient pressure. Both phases undergo a pressure induced first order Mott transition to SC with a (p, T phase diagram displaying a dome shaped SC, a common situation encountered nowadays in correlated electron systems. NMR experiments allowed us to study the magnetic properties of the Mott phases and to evidence clear deviations from BCS expectations near the Mott transition. So, although SC involves an electron-phonon mechanism, the incidence of electron correlations has an importance on the electronic properties, as had been anticipated from DMFT calculations.

  18. Overview on superconducting photoinjectors

    Directory of Open Access Journals (Sweden)

    A. Arnold

    2011-02-01

    Full Text Available The success of most of the proposed energy recovery linac (ERL based electron accelerator projects for future storage ring replacements (SRR and high power IR–free-electron lasers (FELs largely depends on the development of an appropriate source. For example, to meet the FEL specifications [J. W. Lewellen, Proc. SPIE Int. Soc. Opt. Eng. 5534, 22 (2004PSISDG0277-786X10.1117/12.557378] electron beams with an unprecedented combination of high brightness, low emittance (0.1  μmrad, and high average current (hundreds of mA are required. An elegant way to create a beam of such quality is to combine the high beam quality of a normal conducting rf photoinjector with the superconducting technology, i.e., to build a superconducting rf photoinjector (SRF gun. SRF gun R&D programs based on different approaches have been launched at a growing number of institutes and companies (AES, Beijing University, BESSY, BNL, DESY, FZD, TJNAF, Niowave, NPS, Wisconsin University. Substantial progress was achieved in recent years and the first long term operation was demonstrated at FZD [R. Xiang et al., in Proceedings of the 31st International Free Electron Laser Conference (FEL 09, Liverpool, UK (STFC Daresbury Laboratory, Warrington, 2009, p. 488]. In the near future SRF guns are expected to play an important role for linac-driven FEL facilities. In this paper we will review the concepts, the design parameters, and the status of the major SRF gun projects.

  19. Spinon Superconductivity and Superconductivities Mediated by Spin-Waves and Phonons in Cuprates

    OpenAIRE

    Mourachkine, A.

    1998-01-01

    The disclosure of spinon superconductivity and superconductivity mediated by spin-waves in hole-doped Bi2212 cuprate raises the question about the origin of the superconductivity in other cuprates and specially in an electron-doped NCCO cuprate.

  20. 1st International Conference on Opto-Electronics and Applied Optics

    CERN Document Server

    Bhattacharya, Indrani

    2015-01-01

    The Proceedings of First International Conference on Opto-Electronics and Applied Optics 2014, IEM OPTRONIX 2014 presents the research contributions presented in the conference by researchers from both India and abroad. Contributions from established scientists as well as students are included. The book is organized to enable easy access to various topics of interest.   The first part includes the Keynote addresses by Phillip Russell, Max Planck Institute of the Light Sciences, Erlangen, Germany and Lorenzo Pavesi, University of Trento, Italy.   The second part focuses on the Plenary Talks given by eminent scientists, namely, Azizur Rahman, City University London, London; Bishnu Pal, President, The Optical Society of India; Kamakhya Ghatak, National Institute of Technology, Agartala; Kehar Singh, Former Professor, India Institute of Technology Delhi; Mourad Zghal, SUPCOM, University of Carthage, Tunisia; Partha Roy Chaudhuri, IIT Kharagpur; S K. Bhadra, CSIR-Central Glass and Ceramic Research Institute, Kol...

  1. The preliminary tests of the superconducting electron cyclotron resonance ion source DECRIS-SC2.

    Science.gov (United States)

    Efremov, A; Bekhterev, V; Bogomolov, S; Drobin, V; Loginov, V; Lebedev, A; Yazvitsky, N; Yakovlev, B

    2012-02-01

    A new compact version of the "liquid He-free" superconducting ECR ion source, to be used as an injector of highly charged heavy ions for the MC-400 cyclotron, is designed and built at the Flerov Laboratory of Nuclear Reactions in collaboration with the Laboratory of High Energy Physics of JINR. The axial magnetic field of the source is created by the superconducting magnet and the NdFeB hexapole is used for the radial plasma confinement. The microwave frequency of 14 GHz is used for ECR plasma heating. During the first tests, the source shows a good enough performance for the production of medium charge state ions. In this paper, we will present the design parameters and the preliminary results with gaseous ions.

  2. Frontiers in Superconducting Materials

    CERN Document Server

    Narlikar, Anant V

    2005-01-01

    Frontiers in Superconducting Materials gives a state-of-the-art report of the most important topics of the current research in superconductive materials and related phenomena. It comprises 30 chapters written by renowned international experts in the field. It is of central interest to researchers and specialists in Physics and Materials Science, both in academic and industrial research, as well as advanced students. It also addresses electronic and electrical engineers. Even non-specialists interested in superconductivity might find some useful answers.

  3. Intense beam production of highly charged heavy ions by the superconducting electron cyclotron resonance ion source SECRAL.

    Science.gov (United States)

    Zhao, H W; Sun, L T; Zhang, X Z; Guo, X H; Cao, Y; Lu, W; Zhang, Z M; Yuan, P; Song, M T; Zhao, H Y; Jin, T; Shang, Y; Zhan, W L; Wei, B W; Xie, D Z

    2008-02-01

    There has been increasing demand to provide higher beam intensity and high enough beam energy for heavy ion accelerator and some other applications, which has driven electron cyclotron resonance (ECR) ion source to produce higher charge state ions with higher beam intensity. One of development trends for highly charged ECR ion source is to build new generation ECR sources by utilization of superconducting magnet technology. SECRAL (superconducting ECR ion source with advanced design in Lanzhou) was successfully built to produce intense beams of highly charged ion for Heavy Ion Research Facility in Lanzhou (HIRFL). The ion source has been optimized to be operated at 28 GHz for its maximum performance. The superconducting magnet confinement configuration of the ion source consists of three axial solenoid coils and six sextupole coils with a cold iron structure as field booster and clamping. An innovative design of SECRAL is that the three axial solenoid coils are located inside of the sextupole bore in order to reduce the interaction forces between the sextupole coils and the solenoid coils. For 28 GHz operation, the magnet assembly can produce peak mirror fields on axis of 3.6 T at injection, 2.2 T at extraction, and a radial sextupole field of 2.0 T at plasma chamber wall. During the commissioning phase at 18 GHz with a stainless steel chamber, tests with various gases and some metals have been conducted with microwave power less than 3.5 kW by two 18 GHz rf generators. It demonstrates the performance is very promising. Some record ion beam intensities have been produced, for instance, 810 e microA of O(7+), 505 e microA of Xe(20+), 306 e microA of Xe(27+), and so on. The effect of the magnetic field configuration on the ion source performance has been studied experimentally. SECRAL has been put into operation to provide highly charged ion beams for HIRFL facility since May 2007.

  4. PREFACE: International Conference on Strongly Correlated Electron Systems 2014 (SCES2014)

    Science.gov (United States)

    2015-03-01

    The 2014 International Conference on Strongly Correlated Electron Systems (SCES) was held in Grenoble from the 7th to 11th of July on the campus of the University of Grenoble. It was a great privilege to have the conference in Grenoble after the series of meetings in Sendai (1992), San Diego (1993), Amsterdam (1994), Goa (1995), Zürich (1996), Paris (1998), Nagano (1999), Ann Arbor (2001), Krakow (2002), Karlsruhe (2004), Vienna (2005), Houston (2007), Buzios (2008), Santa Fe (2010), Cambridge (2011) and Tokyo (2013). Every three years, SCES joins the triennial conference on magnetism ICM. In 2015, ICM will take place in Barcelona. The meeting gathered an audience of 875 participants who actively interacted inside and outside of conference rooms. A large number of posters (530) was balanced with four parallel oral sessions which included 86 invited speakers and 141 short oral contributions. A useful arrangement was the possibility to put poster presentations on the website so participants could see them all through the conference week. Each morning two plenary sessions were held, ending on Friday with experimental and theoretical summaries delivered by Philipp Gegenwart (Augsburg) and Andrew Millis (Columbia). The plenary sessions were given by Gabriel Kotliar (Rutgers), Masashi Kawasaki (Tokyo), Jennifer Hoffman (Harvard), Mathias Vojta (Dresden), Ashvin Vishwanath (Berkeley), Andrea Cavalleri (Hamburg), Marc-Henri Julien (Grenoble), Neil Mathur (Cambridge), Giniyat Khaliullin (Stuttgart), and Toshiro Sakakibara (Tokyo). The parallel oral sessions were prepared by 40 symposium organizers selected by the chairman (Antoine Georges) and co-chairman (Kamran Behnia) of the Program Committee with the supplementary rule that speakers had not delivered an invited talk at the previous SCES conference held in 2013 in Tokyo. Special attention was given to help young researchers via grants to 40 overseas students. Perhaps due to the additional possibility of cheap

  5. Phase diagram and electronic indication of high-temperature superconductivity at 65 K in single-layer FeSe films.

    Science.gov (United States)

    He, Shaolong; He, Junfeng; Zhang, Wenhao; Zhao, Lin; Liu, Defa; Liu, Xu; Mou, Daixiang; Ou, Yun-Bo; Wang, Qing-Yan; Li, Zhi; Wang, Lili; Peng, Yingying; Liu, Yan; Chen, Chaoyu; Yu, Li; Liu, Guodong; Dong, Xiaoli; Zhang, Jun; Chen, Chuangtian; Xu, Zuyan; Chen, Xi; Ma, Xucun; Xue, Qikun; Zhou, X J

    2013-07-01

    The recent discovery of possible high-temperature superconductivity in single-layer FeSe films has generated significant experimental and theoretical interest. In both the cuprate and the iron-based high-temperature superconductors, superconductivity is induced by doping charge carriers into the parent compound to suppress the antiferromagnetic state. It is therefore important to establish whether the superconductivity observed in the single-layer sheets of FeSe--the essential building blocks of the Fe-based superconductors--is realized by undergoing a similar transition. Here we report the phase diagram for an FeSe monolayer grown on a SrTiO3 substrate, by tuning the charge carrier concentration over a wide range through an extensive annealing procedure. We identify two distinct phases that compete during the annealing process: the electronic structure of the phase at low doping (N phase) bears a clear resemblance to the antiferromagnetic parent compound of the Fe-based superconductors, whereas the superconducting phase (S phase) emerges with the increase in doping and the suppression of the N phase. By optimizing the carrier concentration, we observe strong indications of superconductivity with a transition temperature of 65±5 K. The wide tunability of the system across different phases makes the FeSe monolayer ideal for investigating not only the physics of superconductivity, but also for studying novel quantum phenomena more generally.

  6. Superconductivity and metallic behavior in Pb{sub x}C{sub y}O{sub δ} structures prepared by focused electron beam induced deposition

    Energy Technology Data Exchange (ETDEWEB)

    Winhold, M., E-mail: winhold@Physik.uni-frankfurt.de; Weirich, P. M.; Schwalb, C. H.; Huth, M. [Physikalisches Institut, Goethe-University, 60438 Frankfurt am Main (Germany)

    2014-10-20

    Focused electron beam induced deposition as a direct-write approach possesses great potential to meet the demands for superconducting nanostructure fabrication especially regarding its 3D patterning capabilities combined with the high resolution in the nanometer regime. So far, however, it was not possible to fabricate superconducting structures with this technique. In this work, we present a lead-based superconductor prepared by focused electron beam induced deposition by dissociation of the precursor tetraethyllead. The as-grown structures exhibit metallic behavior and a minimum resistivity in the normal state of ρ = 16 μΩcm at T = 9 K followed by a superconducting transition at T{sub c} = 7.2 K.

  7. Size effect of strong-coupled superconducting In{sub 2}Bi nanoparticles: An investigation of short-range electron phonon coupling

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Po-Yu; Gandhi, Ashish Chhaganlal; Wu, Sheng Yun, E-mail: sywu@mail.ndhu.edu.tw [Department of Physics, National Dong Hwa University, Hualien 97401, Taiwan (China)

    2015-05-07

    We report the influence of the nanosized effect on the superconducting properties of bimetallic In{sub 2}Bi nanoparticles. In this study, the temperature- and applied magnetic field-dependence of the magnetization were utilized to investigate the electron-phonon coupling effect while controlling particle sizes 〈d〉 from 21(2) to 42(5) nm. As the particle size decreases, the electron-phonon constant λ{sub EP} decreases rapidly, signaling the short-range electron-phonon coupling effect which acts to confine the electrons within a smaller volume, thereby giving rise to a higher superconducting transition temperature T{sub C}. An enhanced superconducting transition was observed from the temperature dependence of magnetization, revealing a main diamagnetic Meissner state below T{sub C} ∼ 5.72(5) K for 〈d〉 = 31(1) nm In{sub 2}Bi nanoparticles. The variation of the T{sub C} is very sensitive to the particle size, which might be due to crystallinity and size uniformity of the samples. The electron-phonon coupling to low lying phonons is found to be the leading mechanism for the observed strong-coupling superconductivity in the In{sub 2}Bi system.

  8. Superconductivity and its mechanism in an ab initio model for electron-doped LaFeAsO.

    Science.gov (United States)

    Misawa, Takahiro; Imada, Masatoshi

    2014-12-22

    Two families of high-temperature superconductors whose critical temperatures are higher than 50 K are known. One are the copper oxides and the other are the iron-based superconductors. Comparisons of mechanisms between these two in terms of common ground as well as distinctions will greatly help in searching for higher T(c) superconductors. However, studies on mechanisms for the iron family based on first principles calculations are few. Here we first show that superconductivity emerges in the state-of-the-art numerical calculations for an ab initio multi-orbital model of an electron-doped iron-based superconductor LaFeAsO, in accordance with experimental observations. Then the mechanism of the superconductivity is identified as enhanced uniform density fluctuations by one-to-one correspondence with the instability towards inhomogeneity driven by first-order antiferromagnetic and nematic transitions. Despite many differences, certain common features with the copper oxides are also discovered in terms of the underlying orbital-selective Mottness found in the iron family.

  9. Preparation of superconducting Bi-Sr-Ca-Cu-O thin films by sequential electron beam evaporation and oxygen annealing

    Energy Technology Data Exchange (ETDEWEB)

    Steinbeck, J.; Tsaur, B.; Anderson, A.C.; Strauss, A.J.

    1989-01-30

    Superconducting films with nominal composition Bi/sub 2/Sr/sub 2/Ca/sub 1/Cu/sub 2/O/sub x/ have been prepared on <100> MgO substrates by sequential electron beam evaporation of Cu, Bi, and Sr/sub 2/3/ Ca/sub 1/3/ F/sub 2/, followed by annealing in flowing wet, then dry, O/sub 2/. X-ray diffraction data show that the films contain the two Bi-Sr-Ca-Cu-O phases that have been identified in the literature as a superconducting phase with capprox.31 A and a semiconducting phase with capprox.24 A. Both phases are strongly textured with the c axis perpendicular to the substrate. For the best film, which was annealed at 870 /sup 0/C for 30 min, zero resistance was observed at 90 K, and the critical current density increased from 0.8 x 10/sup 5/ A/cm/sup 2/ at 77 K to 2.3 x 10/sup 5/ A/cm/sup 2/ at 4.2 K.

  10. PREFACE: XXVII International Conference on Photonic, Electronic and Atomic Collisions (ICPEAC 2011)

    Science.gov (United States)

    Williams, I. D.; van der Hart, H. W.; McCann, J. F.; Crothers, D. S. F.

    2012-11-01

    The XXVII International Conference on Photonic, Electronic and Atomic Collisions was held at Queen's University Belfast, Northern Ireland, 27 July - 2 August 2011. Members of the Local Organising Committee were drawn from the School of Mathematics and Physics of Queen's University Belfast, the School of Physical Sciences at Dublin City University, the School of Physics at University College Dublin and the Department of Experimental Physics at the National University of Ireland, Maynooth. The Conference was attended by 566 participants with contributions from 54 countries. The meeting attracted 786 contributed papers for presentation in the poster sessions. The conference included 20 Special Reports selected from the contributed papers, and these are included in part 1 of this volume. During the meeting a total of 65 Progress Reports were also presented, and the authors invited to submit written versions of their talks (see Part 1). Of the total number of contributed papers, 663 are included as refereed abstracts in parts 2 to 15 of this volume of Journal of Physics: Conference Series. Part 1 of this volume includes detailed write-ups of the majority of plenary lectures, progress reports and special reports, constituting a comprehensive tangible record of the meeting, and is additionally published in hard-copy as the Conference Proceedings. There were 5 plenary lectures given by Margaret Murnane on Ultrafast processes in atomic dynamics; Chris Greene on Few-body highly-correlated dynamics; Michael Allan on Electron-molecule collisions; Yasunori Yamazaki on Antiproton and positron collisions and Thomas Stöhlker on Relativistic ion collisions. Ian Spielman, winner of the IUPAP Young Scientist Prize for 2011, gave a special lecture entitled Modifying interatomic interactions using Raman coupling: a tale of slowly colliding Bose-Einstein condensates. In addition an evening public lecture by Mike Baillie on How precise tree-ring dating raises issues concerning the

  11. Electron Bunch Train Excited Higher-Order Modes in a Superconducting RF Cavity

    CERN Document Server

    Gao, Yongfeng; Wang, Fang; Feng, Liwen; Zhuang, Dehao; Lin, Lin; Zhu, Feng; Hao, Jiankui; Quan, Shengwen; Liu, Kexin

    2016-01-01

    Higher-order mode (HOM) based intra-cavity beam diagnostics has been proved effectively and conveniently in superconducting radio-frequency (SRF) accelerators. Our recent research shows that the beam harmonics in the bunch train excited HOM spectrum, which have much higher signal-to-noise ratio than the intrinsic HOM peaks, may also be useful for beam diagnostics. In this paper, we will present our study on bunch train excited HOMs, including the theoretic model and recent experiments carried out based on the DC-SRF photoinjector and SRF linac at Peking University.

  12. Direct evidence for a magnetic f-electron-mediated pairing mechanism of heavy-fermion superconductivity in CeCoIn5.

    Science.gov (United States)

    Van Dyke, John S; Massee, Freek; Allan, Milan P; Davis, J C Séamus; Petrovic, Cedomir; Morr, Dirk K

    2014-08-12

    To identify the microscopic mechanism of heavy-fermion Cooper pairing is an unresolved challenge in quantum matter studies; it may also relate closely to finding the pairing mechanism of high-temperature superconductivity. Magnetically mediated Cooper pairing has long been the conjectured basis of heavy-fermion superconductivity but no direct verification of this hypothesis was achievable. Here, we use a novel approach based on precision measurements of the heavy-fermion band structure using quasiparticle interference imaging to reveal quantitatively the momentum space (k-space) structure of the f-electron magnetic interactions of CeCoIn5. Then, by solving the superconducting gap equations on the two heavy-fermion bands Ek(α,β) with these magnetic interactions as mediators of the Cooper pairing, we derive a series of quantitative predictions about the superconductive state. The agreement found between these diverse predictions and the measured characteristics of superconducting CeCoIn5 then provides direct evidence that the heavy-fermion Cooper pairing is indeed mediated by f-electron magnetism.

  13. Thirty-first annual gaseous electronic conference. A topical conference of the American Physical Socity. Program and abstracts. [Buffalo, New York, October 17--20, 1978

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-01-01

    This volume contains the program and abstracts of the conference. The following topics are included: metal vapor molecular lasers, magnetohydrodynamics, rare gas halide and nuclear pumped lasers, transfer mechanisms in arcs, kinetic processes in rare gas halide lasers, arcs and flows, XeF kinetics and lasers, fundamental processes in excimer lasers, electrode effects and vacuum arcs, electron and ion transport, ion interactions and mobilities, glow discharges, diagnostics and afterglows, dissociative recombination, electron ionization and excitation, rare gas excimers and group VI lasers, breakdown, novel laser pumping techniques, electrode-related discharge phenomena, photon interactions, attachment, plasma chemistry and infrared lasers, electron scattering, and reactions of excited species. (RWR)

  14. Superconducting cavities for LEP

    CERN Multimedia

    1983-01-01

    Above: a 350 MHz superconducting accelerating cavity in niobium of the type envisaged for accelerating electrons and positrons in later phases of LEP. Below: a small 1 GHz cavity used for investigating the surface problems of superconducting niobium. Albert Insomby stays on the right. See Annual Report 1983 p. 51.

  15. Application of superconducting technologies as chemical/biological agent electronic eyes

    Science.gov (United States)

    Savoy, Steven M.; Eames, Sara J.; Jurbergs, David C.; Zhao, Jianai; McDevitt, John T.; Sobel, Annette L.

    1997-01-01

    High temperature superconductors provide enhanced sensitivity capabilities as chemical/biological agent detectors. State-of-the-art advances in ruggedizing superconducting platforms make them much more robust for field applications. In addition, microminiaturization and advances in refrigeration have enabled the systems engineering of portable, durable, survivable, low power requirement devices. This presentation describes a prototype system employing YBCO (yttrium barium copper oxide) superconducting quantum interference devices (SQUIDS) with specific biolayer detection dye coatings. These devices may be deployed as specific stand-off detectors, or potentially reconfigured as point sensors. A library of pattern recognition algorithms provides the reference template for the system. The human-system interface will provide a 'yes/no' agent confirmation for the environment being queried, and associated confidence value. This prototype detection system has great potential for deployment in support of hostage rescue/rapid response teams, DMAT, and urban search and rescue. The preparation and characterization of a new generation of optical sensors fabricated from high-temperature superconductor (HTSC) thin films is reported herein. These new hybrid devices are fashioned using HTSC thin films which are coated with organic dye overlayers. These systems are shown to respond selectively to those wavelengths which are absorbed strongly by the molecular dye. Methods for fabricating the superconductor element and depositing the dye layer are discussed. Moreover, resistivity versus temperature measurements before and after dye deposition are utilized to characterize these hybrid structures. The unique optical response properties of these hybrid sensors are also detailed.

  16. Design and characterization of a 32-channel heterodyne radiometer for electron cyclotron emission measurements on experimental advanced superconducting tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Han, X.; Liu, X.; Liu, Y., E-mail: liuyong@ipp.ac.cn; Li, E. Z.; Hu, L. Q.; Gao, X. [Institution of Plasma Physics, Chinese Academy of Sciences, P. O. Box 1126, Hefei, Anhui 230031 (China); Domier, C. W.; Luhmann, N. C. [Department of Electrical and Computer Engineering, University of California, Davis, California 95616 (United States)

    2014-07-15

    A 32-channel heterodyne radiometer has been developed for the measurement of electron cyclotron emission (ECE) on the experimental advanced superconducting tokamak (EAST). This system collects X-mode ECE radiation spanning a frequency range of 104–168 GHz, where the frequency coverage corresponds to a full radial coverage for the case with a toroidal magnetic field of 2.3 T. The frequency range is equally spaced every 2 GHz from 105.1 to 167.1 GHz with an RF bandwidth of ∼500 MHz and the video bandwidth can be switched among 50, 100, 200, and 400 kHz. Design objectives and characterization of the system are presented in this paper. Preliminary results for plasma operation are also presented.

  17. HOM damping properties of fundamental power couplers in the superconducting electron gun of the energy recovery LINAC at Brookhaven National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Hammons, L.; Hahn, H.

    2011-03-28

    Among the accelerator projects under construction at the Relativistic Heavy Ion Collider (RHIC) is an R and D energy recovery LINAC (ERL) test facility. The ERL includes both a five-cell superconducting cavity as well as a superconducting, photoinjector electron gun. Because of the high-charge and high-current demands, effective higher-order mode (HOM) damping is essential, and several strategies are being pursued. Among these is the use of the fundamental power couplers as a means for damping some HOMs. Simulation studies have shown that the power couplers can play a substantial role in damping certain HOMs, and this presentation discusses these studies along with measurements.

  18. A simple approach for electron-electron scattering in nonequilibrium Green's function simulations (Conference Presentation)

    Science.gov (United States)

    Winge, David O.; Franckie, Martin; Verozzi, Claudio; Wacker, Andreas; Pereira, Mauro F.

    2016-10-01

    Regardless of all the success of Mid Infrared Quantum Cascade Lasers (QCLs), they still do not operate at room temperature in the THz range. The main temperature degrading mechanism for THz QCLs is not known in time of writing this abstract and it is still a topic of debate by the community [S. Khanal et al, J. Opt. 16 094001, 2014]. This is a challenge to theory and it is crucial to treat all possible scattering channels with the same mathematical footing. A summary of different methods for simulating these structures is found in [C. Jirauschek et al, Appl. Phys. Rev. 1 011307, 2014]. In this work we include and study the effects of electron-electron scattering via the Single Plasmon Pole Approximation (SPPA). In this approximation we capture both the static limit as well as dynamic effects. This gives an energy dependent (non-local in time) interaction beyond the Hartree-Fock approximation. This has been studied in a similar model with promising results [T. Schmielau and M.F. Pereira, Appl. Phys. Lett. 95 231111, 2009], and with this work we want to adapt the idea into the model described in Ref. [A. Wacker et a, IEEE Journal of Sel. Top. in Quantum Electron.,19 1200611, 2013]. We start by summarizing the theory underlying the SPPA and we show how it is implemented in the context of our formalism, by showing good agreement with the results for a four well quantum cascade laser [M. Amanti et al, New J. Phys. 11 125022, 2009].

  19. Destruction of Neel order and appearance of superconductivity in electron-doped cuprates by oxygen annealing process

    OpenAIRE

    Li, Shiliang; Chi, Songxue; Zhao, Jun; Wen, H.-H.; Stone, M. B.; Lynn, J. W.; Dai, Pengcheng

    2008-01-01

    We use thermodynamic and neutron scattering measurements to study the effect of oxygen annealing on the superconductivity and magnetism in Pr$_{0.88}$LaCe$_{0.12}$CuO$_{4-\\delta}$. Although the transition temperature $T_c$ measured by susceptibility and superconducting coherence length increase smoothly with gradual oxygen removal from the annealing process, bulk superconductivity, marked by a specific heat anomaly at $T_c$ and the presence of a neutron magnetic resonance, only appears abrupt...

  20. Electron Tunneling Studies of MOLYBDENUM(1-X) Rhenium(x): Enhancement of Superconductivity by a Resonance Mode.

    Science.gov (United States)

    Shum, Danny Pak-Chum

    It is well-known that a heavy impurity atom in a lattice of light atoms induces a lower frequency in-band resonance mode in the vibrational spectrum. The exact effect of such a mode on the lat- tice spectrum has not previously been reported and effects of such modes on superconductivity have not previously been described. Sputtered thin films of bcc Mo(,1-x)Re(,x), 0.2 0. (delta) increases with (lamda)(,R), the Re contribution to the electron-phonon coupling con- stant (lamda). The dependences of the anomalous softening and width of the resonance mode on (lamda)(,R) fit the Yu-Anderson theory of local pho- non screening by a Fermi gas of electrons treated as Tomonago. bosons. These results explain the low N(0), high T(,c) behavior of Mo(,.6)Re(,.4). *DOE Report IS-T-1246. This work was performed under contract No. W-7405-Eng-82 with the U.S. Department of Energy.

  1. Optically induced lattice deformations, electronic structure changes, and enhanced superconductivity in YBa2Cu3O6.48

    Directory of Open Access Journals (Sweden)

    R. Mankowsky

    2017-07-01

    Full Text Available Resonant optical excitation of apical oxygen vibrational modes in the normal state of underdoped YBa2Cu3O6+x induces a transient state with optical properties similar to those of the equilibrium superconducting state. Amongst these, a divergent imaginary conductivity and a plasma edge are transiently observed in the photo-stimulated state. Femtosecond hard x-ray diffraction experiments have been used in the past to identify the transient crystal structure in this non-equilibrium state. Here, we start from these crystallographic features and theoretically predict the corresponding electronic rearrangements that accompany these structural deformations. Using density functional theory, we predict enhanced hole-doping of the CuO2 planes. The empty chain Cu dy2-z2 orbital is calculated to strongly reduce in energy, which would increase c-axis transport and potentially enhance the interlayer Josephson coupling as observed in the THz-frequency response. From these results, we calculate changes in the soft x-ray absorption spectra at the Cu L-edge. Femtosecond x-ray pulses from a free electron laser are used to probe changes in absorption at two photon energies along this spectrum and provide data consistent with these predictions.

  2. Reassessment of the electronic state, magnetism, and superconductivity in high-T{sub c} cuprates with the Nd{sub 2}CuO{sub 4} structure

    Energy Technology Data Exchange (ETDEWEB)

    Naito, Michio, E-mail: minaito@cc.tuat.ac.jp [Department of Applied Physics, Tokyo University of Agriculture and Technology, Naka-cho 2-24-16, Koganei, Tokyo 184-8588 (Japan); Krockenberger, Yoshiharu; Ikeda, Ai; Yamamoto, Hideki [NTT Basic Research Laboratories, NTT Corporation, 3-1 Morinosato-Wakamiya, Atsugi, Kanagawa 243-0198 (Japan)

    2016-04-15

    Highlights: • The 30-year history of “electron-doped” cuprates is reviewed, including basic physics and material issues. • Undoped cuprates with the Nd{sub 2}CuO{sub 4} (T’) structure are superconducting with T{sub c} over 30 K. • Electron doping by Ce in T’-RE{sub 2}CuO{sub 4} lowers T{sub c} and the highest T{sub c} is obtained at no doping. - Abstract: The electronic phase diagram of the cuprates remains enigmatic and is still a key ingredient to understand the mechanism of high-T{sub c} superconductivity. It has been believed for a long time that parent compounds of cuprates were universally antiferromagnetic Mott insulators (charge-transfer insulators) and that high-T{sub c} superconductivity would develop upon doping holes or electrons in a Mott–Hubbard insulator (“doped Mott-insulator scenario”). However, our recent discovery of superconductivity in the parent compounds of square-planar cuprates with the Nd{sub 2}CuO{sub 4} (T’) structure and the revised electronic phase diagram in T’ cuprates urged a serious reassessment to the above scenario. In this review, we present the main results derived from our synthesis and experiments on T’ cuprates in the undoped or heavily underdoped regime over 20 years, including material issues and basic physics. The key material issue is how to remove excess oxygen ions at the apical site without introducing oxygen vacancies in the CuO{sub 2} planes. In order to put this into practice, the basic knowledge of complex solid-state chemistry in T’ cuprates is required, which is also included in this review.

  3. Contributions to the 1999 particle accelerator conference

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, M. [Laboratoire de l' Accelerateur Lineaire, 91 - Orsay (France); Fartoukh, S.; Jablonka, M.; Joly, J.M.; Lalot, M.; Magne, C.; Napoly, O. [CEA/Saclay, 91 - Gif sur Yvette (France); Baboi, N.; Schreiber, S.; Simrock, S.; Weise, H. [DESY, Hamburg (Germany)

    2000-06-01

    This document puts together the 10 contributions of the laboratory to the 1999 particle accelerator conference. The titles of the papers are: 1) Evidence for a strongly coupled dipole mode with insufficient damping in the first accelerating module of the TESLA test facility (TTF); 2) An alternative scheme for stiffening superconducting RF cavities by plasma spraying; 3) A laser triggered electron source for pulsed radiolysis; 4) A cure for the energy spread increasing related bunch lengthening in electron storage rings; 5) Single bunch longitudinal instabilities in proton storage rings; 6) Analytical investigation on the halo formation in space charge dominated beams; 7) Analytical investigation on the dynamic apertures of circular accelerators; 8) The intrinsic upper limit to the beam energy of an electron-positron circular collider; 9) Coaxial disc windows for a high power superconducting cavity input coupler; and 10) RF pulsed tests on 3 GHz niobium cavities.

  4. 76 FR 71044 - International Conference on Harmonisation; E2B(R3) Electronic Transmission of Individual Case...

    Science.gov (United States)

    2011-11-16

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration International Conference on Harmonisation; E2B(R3) Electronic Transmission of Individual Case Safety Reports; Draft Guidance on Implementation; Data...

  5. Tuning the electronic and the crystalline structure of LaBi by pressure: From extreme magnetoresistance to superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Tafti, F. F.; Torikachvili, M. S.; Stillwell, R. L.; Baer, B.; Stavrou, E.; Weir, S. T.; Vohra, Y. K.; Yang, H. -Y.; McDonnell, E. F.; Kushwaha, S. K.; Gibson, Q. D.; Cava, R. J.; Jeffries, J. R.

    2017-01-01

    Extreme magnetoresistance (XMR) in topological semimetals is a recent discovery which attracts attention due to its robust appearance in a growing number of materials. To search for a relation between XMR and superconductivity, we study the effect of pressure on LaBi. By increasing pressure, we observe the disappearance of XMR followed by the appearance of superconductivity at P ≈ 3.5 GPa. We find a region of coexistence between superconductivity and XMR in LaBi in contrast to other superconducting XMR materials. The suppression of XMR is correlated with increasing zero-field resistance instead of decreasing in-field resistance. At higher pressures, P ≈ 11 GPa, we find a structural transition from the face-centered cubic lattice to a primitive tetragonal lattice, in agreement with theoretical predictions. The relationship between extreme magnetoresistance, superconductivity, and structural transition in LaBi is discussed.

  6. The happy marriage between electron-phonon superconductivity and Mott physics in Cs3C60: A first-principle phase diagram

    Science.gov (United States)

    Capone, Massimo; Nomura, Yusuke; Sakai, Shiro; Giovannetti, Gianluca; Arita, Ryotaro

    The phase diagram of doped fullerides like Cs3C60 as a function of the spacing between fullerene molecules is characterized by a first-order transition between a Mott insulator and an s-wave superconductor with a dome-shaped behavior of the critical temperature. By means of an ab-initio modeling of the bandstructure, the electron-phonon interaction and the interaction parameter and a Dynamical Mean-Field Theory solution, we reproduce the phase diagram and demonstrate that phonon superconductivity benefits from strong correlations confirming earlier model predictions. The role of correlations is manifest also in infrared measurements carried out by L. Baldassarre. The superconducting phase shares many similarities with ''exotic'' superconductors with electronic pairing, suggesting that the anomalies in the ''normal'' state, rather than the pairing glue, can be the real common element unifying a wide family of strongly correlated superconductors including cuprates and iron superconductors

  7. Factors affecting the superconductivity in the process of depositing Nd1.85Ce0.15CuO4-δ by the pulsed electron deposition technique

    Institute of Scientific and Technical Information of China (English)

    GUO; YanFeng

    2007-01-01

    On SrTiO3 single crystal substrate, by using the pulsed electron deposition technique, the high-quality electron doped Nd1.85Ce0.15CuO4-δsuperconducting film was successfully fabricated. After careful study on the R-T curves of the obtained samples deposited with different substrate temperatures, thicknesses, annealing methods and pulse frequencies, the effects of them on the superconductivity of the films were found, and the reasons were also analyzed. Additionally, by using the same model of the pulsed laser deposition technique, the relation between the target-to-substrate distance and the deposition pressure was drawn out as a quantitative one.  ……

  8. Progress Towards High-Sensitivity Arrays of Detectors of Sub-mm Radiation Using Superconducting Tunnel Junctions with Integrated Radio Frequency Single-Electron Transistors

    Science.gov (United States)

    Stevenson, T. R.; Hsieh, W.-T.; Li, M. J.; Prober, D. E.; Rhee, K. W.; Schoelkopf, R. J.; Stahle, C. M.; Teufel, J.; Wollack, E. J.

    2004-01-01

    For high resolution imaging and spectroscopy in the FIR and submillimeter, space observatories will demand sensitive, fast, compact, low-power detector arrays with 104 pixels and sensitivity less than 10(exp -20) W/Hz(sup 0.5). Antenna-coupled superconducting tunnel junctions with integrated rf single-electron transistor readout amplifiers have the potential for achieving this high level of sensitivity, and can take advantage of an rf multiplexing technique. The device consists of an antenna to couple radiation into a small superconducting volume and cause quasiparticle excitations, and a single-electron transistor to measure current through junctions contacting the absorber. We describe optimization of device parameters, and results on fabrication techniques for producing devices with high yield for detector arrays. We also present modeling of expected saturation power levels, antenna coupling, and rf multiplexing schemes.

  9. Electron-phonon coupling in superconducting β-PdBi{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Ramesh [Dept. of Physics, Feroze Gandhi Institute of Engineering and Technology, Raebareli-229001 (India); Dwivedi, Shalini; Sharma, Yamini, E-mail: sharma.yamini62@gmail.com [Theoretical Condensed Matter Physics Laboratory, Dept. of Physics, Feroze Gandhi College, Raebareli-229001 (India)

    2015-06-24

    We have studied the electronic, transport and vibrational properties of low temperature superconductor β-PdBi{sub 2}. The band manifold clearly demonstrates the 2D-layered structure with multiple gaps. The intersection of bands at E{sub F} in the Γ-P, Γ-N directions gives rise to complicated Fermi surface topology, which contains quite complicated multiple connected sheets, as well as hole and electron-like pockets. From the low temperature specific heat, we have estimated the electron-phonon coupling constant λ{sub el-ph} which has a very high value of 3.66. The vibrational properties clearly illustrates that the strong coupling makes the lattice unstable. The calculated properties confirm that β-PdBi{sub 2} is an intermediate coupling superconductor.

  10. Quantum teleportation and entanglement swapping of electron spins in superconducting hybrid structures

    Energy Technology Data Exchange (ETDEWEB)

    Bubanja, Vladimir, E-mail: vladimir.bubanja@callaghaninnovation.govt.nz

    2015-06-15

    We present schemes for quantum teleportation and entanglement swapping of electronic spin states in hybrid superconductor–normal-metal systems. The proposed schemes employ subgap transport whereby the lowest order processes involve Cooper pair-electron and double Cooper-pair cotunneling in quantum teleportation and entanglement swapping protocols, respectively. The competition between elastic cotunneling and Cooper-pair splitting results in the success probability of 25% in both cases. Described implementations of these protocols are within reach of present-day experimental techniques.

  11. 1989 Review Conference on New Electronic Technologies for the Elderly: Issues and Projects. Report of an Aspen Institute Conference (5th, Queenstown, Maryland, March 8-10, 1989). Communications and Society Forum Report #11.

    Science.gov (United States)

    Bollier, David

    This document presents summaries of conference presentations which attempted to assess how computer and communications technologies can be harnessed to meet the special needs of elderly people. Each of the eight sessions of the conference opened with experts discussing their respective research projects and electronic technologies: their origins,…

  12. Electronic inhomogeneities in the superconducting phase of CaFe1.96Ni0.04As2 single crystals

    Science.gov (United States)

    Dutta, Anirban; Kumar, Neeraj; Thamizhavel, A.; Gupta, Anjan K.

    2015-02-01

    Superconductivity in CaFe2-xNixAs2 emerges in close proximity to an antiferromagnetic (AFM) ordered parent state and the AFM phase overlaps with superconducting (SC) phase for a small range of x-values. We present scanning tunneling microscopy and spectroscopy study of an underdoped CaFe2-xNixAs2 single crystal in the vicinity of the boundary of the two phases. Both resistivity and magnetic susceptibility measurements show a superconducting TC of 15 K and from later we deduce a superconducting fraction of 1.2%. Topographic images show reasonably flat surface with signatures of atomic resolution. Spectra between 120 K and 20 K are spatially homogeneous and show signatures of spin density wave (SDW) gap. Below TC, spectra show significant spatial inhomogeneity with a depression in density of states in±5 meV energy range. Inhomogeneity reduces significantly as the temperature goes above TC and disappears completely far above TC. These observations are discussed in terms of an inhomogeneous electronic phase that may exist due to the vicinity of this composition to the SC dome boundary on the underdoped side of the phase diagram.

  13. Electronic materials high-T(sub c) superconductivity polymers and composites structural materials surface science and catalysts industry participation

    Science.gov (United States)

    1988-01-01

    The fifth year of the Center for Advanced Materials was marked primarily by the significant scientific accomplishments of the research programs. The Electronics Materials program continued its work on the growth and characterization of gallium arsenide crystals, and the development of theories to understand the nature and distribution of defects in the crystals. The High Tc Superconductivity Program continued to make significant contributions to the field in theoretical and experimental work on both bulk materials and thin films and devices. The Ceramic Processing group developed a new technique for cladding YBCO superconductors for high current applications in work with the Electric Power Research Institute. The Polymers and Composites program published a number of important studies involving atomistic simulations of polymer surfaces with excellent correlations to experimental results. The new Enzymatic Synthesis of Materials project produced its first fluorinated polymers and successfully began engineering enzymes designed for materials synthesis. The structural Materials Program continued work on novel alloys, development of processing methods for advanced ceramics, and characterization of mechanical properties of these materials, including the newly documented characterization of cyclic fatigue crack propagation behavior in toughened ceramics. Finally, the Surface Science and Catalysis program made significant contributions to the understanding of microporous catalysts and the nature of surface structures and interface compounds.

  14. Final Scientific/Technical Report: Electronics for Large Superconducting Tunnel Junction Detector Arrays for Synchrotron Soft X-ray Research

    Energy Technology Data Exchange (ETDEWEB)

    Warburton, William K

    2009-03-06

    Superconducting tunnel junction (STJ) detectors offer a an approach to detecting soft x-rays with energy resolutions 4-5 times better and at rates 10 faster than traditions semiconductor detectors. To make such detectors feasible, however, then need to be deployed in large arrays of order 1000 detectors, which in turn implies that their processing electronics must be compact, fully computer controlled, and low cost per channel while still delivering ultra-low noise performance so as to not degrade the STJ's performance. We report on our progress in designing a compact, low cost preamplifier intended for this application. In particular, we were able to produce a prototype preamplifier of 2 sq-cm area and a parts cost of less than $30 that matched the energy resolution of the best conventional system to date and demonstrated its ability to acquire an STJ I-V curve under computer control, the critical step for determining and setting the detectors' operating points under software control.

  15. Electronic materials high-T(sub c) superconductivity polymers and composites structural materials surface science and catalysts industry participation

    Science.gov (United States)

    1988-01-01

    The fifth year of the Center for Advanced Materials was marked primarily by the significant scientific accomplishments of the research programs. The Electronics Materials program continued its work on the growth and characterization of gallium arsenide crystals, and the development of theories to understand the nature and distribution of defects in the crystals. The High Tc Superconductivity Program continued to make significant contributions to the field in theoretical and experimental work on both bulk materials and thin films and devices. The Ceramic Processing group developed a new technique for cladding YBCO superconductors for high current applications in work with the Electric Power Research Institute. The Polymers and Composites program published a number of important studies involving atomistic simulations of polymer surfaces with excellent correlations to experimental results. The new Enzymatic Synthesis of Materials project produced its first fluorinated polymers and successfully began engineering enzymes designed for materials synthesis. The structural Materials Program continued work on novel alloys, development of processing methods for advanced ceramics, and characterization of mechanical properties of these materials, including the newly documented characterization of cyclic fatigue crack propagation behavior in toughened ceramics. Finally, the Surface Science and Catalysis program made significant contributions to the understanding of microporous catalysts and the nature of surface structures and interface compounds.

  16. 1976 Navy Study on Superconductive Electronics, August 2-13, 1976, Naval Postgraduate School, Monterey, California

    Science.gov (United States)

    1976-01-01

    the projected performance of SCE radiometers is more than an order of magnitude greater than conventional technology. -127- 16. MICROWAVE ...GHz and 4-bit resolution in the near term, and significantly greater resolution in the next decade. Microwave /Millimeter Wave Electronics ~ SCE...variety of applications from magnetic anomaly detection and geothermal prospecting to biomedical research. The full potential of SCE systems in this

  17. Reassessment of the electronic state, magnetism, and superconductivity in high-Tc cuprates with the Nd2CuO4 structure

    Science.gov (United States)

    Naito, Michio; Krockenberger, Yoshiharu; Ikeda, Ai; Yamamoto, Hideki

    2016-04-01

    The electronic phase diagram of the cuprates remains enigmatic and is still a key ingredient to understand the mechanism of high-Tc superconductivity. It has been believed for a long time that parent compounds of cuprates were universally antiferromagnetic Mott insulators (charge-transfer insulators) and that high-Tc superconductivity would develop upon doping holes or electrons in a Mott-Hubbard insulator ("doped Mott-insulator scenario"). However, our recent discovery of superconductivity in the parent compounds of square-planar cuprates with the Nd2CuO4 (T') structure and the revised electronic phase diagram in T' cuprates urged a serious reassessment to the above scenario. In this review, we present the main results derived from our synthesis and experiments on T' cuprates in the undoped or heavily underdoped regime over 20 years, including material issues and basic physics. The key material issue is how to remove excess oxygen ions at the apical site without introducing oxygen vacancies in the CuO2 planes. In order to put this into practice, the basic knowledge of complex solid-state chemistry in T' cuprates is required, which is also included in this review.

  18. Superconductivity in the two-dimensional electron gas induced by high-energy optical phonon mode and large polarization of the SrTiO3 substrate

    Science.gov (United States)

    Rosenstein, Baruch; Shapiro, B. Ya.; Shapiro, I.; Li, Dingping

    2016-07-01

    Pairing in one-atomic-layer-thick two-dimensional electron gas (2DEG) by a single flat band of high-energy longitudinal optical phonons is considered. The polar dielectric SrTiO3 (STO) exhibits such an energetic phonon mode and the 2DEG is created both when one unit cell FeSe layer is grown on its (100 ) surface and on the interface with another dielectric like LaAlO3 (LAO). We obtain a quantitative description of both systems solving the gap equation for Tc for arbitrary Fermi energy ɛF, electron-phonon coupling λ , and the phonon frequency Ω , and direct (random-phase approximation) electron-electron repulsion strength α . The focus is on the intermediate region between the adiabatic, ɛF>>Ω , and the nonadiabatic, ɛF<<Ω , regimes. The high-temperature superconductivity in single-unit-cell FeSe/STO is possible due to a combination of three factors: high-longitudinal-optical phonon frequency, large electron-phonon coupling λ ˜0.5 , and huge dielectric constant of the substrate suppression the Coulomb repulsion. It is shown that very low density electron gas in the interfaces is still capable of generating superconductivity of the order of 0.1 K in LAO/STO.

  19. Electronic, thermal, and superconducting properties of metal nitrides (MN) and metal carbides (MC) (M=V, Nb, Ta) compounds by first principles studies

    Energy Technology Data Exchange (ETDEWEB)

    Subhashree, G.; Sankar, S.; Krithiga, R. [Anna Univ., Chennai, Tamil Nadu (India). Condensed Matter Lab.

    2015-07-01

    Structural, electronic, and superconducting properties of carbides and nitrides of vanadium (V), niobium (Nb), and tantalum (Ta) (group V transition elements) have been studied by computing their electronic band structure characteristics. The electronic band structure calculations have been carried out based on the density functional theory (DFT) within the local density approximation (LDA) by using the tight binding linear muffin tin orbital method. The NaCl-type cubic structures of MN and MC (M=V, Nb, Ta) compounds have been confirmed from the electronic total energy minimum of these compounds. The ground state properties, such as equilibrium lattice constant (a{sub 0}), bulk modulus (B), and Wigner-Seitz radius (S{sub 0}) are determined and compared with available data. The electronic density of states reveals the metallic nature of the chosen materials. The electronic specific heat coefficient, Debye temperature, and superconducting transition temperature obtained from the band structure results are found to agree well with the earlier reported literature.

  20. 3rd International Conference on Opto-Electronics and Applied Optics

    CERN Document Server

    Chakrabarti, Satyajit; Reehal, Haricharan; Lakshminarayanan, Vasudevan

    2017-01-01

    The Proceedings of 3rd International Conference on Opto-Electronics and Applied Optics, OPTRONIX 2016 is an effort to promote and present the research works by scientists and researchers including students in India and abroad in the area of Green Photonics and other related areas as well as to raise awareness about the recent trends of research and development in the area of the related fields. The book has been organized in such a way that it will be easier for the readers to go through and find out the topic of their interests. The first part includes the Keynote addresses by Rajesh Gupta, Department of Energy Science and Engineering, Indian Institute of Technology, Bombay; P.T. Ajith Kumar, President and Leading Scientist Light Logics Holography and Optics, Crescent Hill, Trivandrum, Kerala; and K.K. Ghosh, Institute of Engineering & Management, Kolkata, India.  The second part focuses on the Plenary and Invited Talks given by eminent scientists namely, Vasudevan Lakshminarayanan, University of Wate...

  1. Distinguishing S-plus-minus and S-plus-plus electron pairing symmetries by neutron spin resonances in superconducting Sodium-Iron-Cobalt-Arsenic (transitional temperature = 18 Kelvin)

    Energy Technology Data Exchange (ETDEWEB)

    Das, Tanmoy [Los Alamos National Laboratory; Balatsky, Alexander V. [Los Alamos National Laboratory; Zhang, Chenglin [University of Tennessee, Knoxville, Tennessee; Li, Haifeng [Institut fur Festkorperforschung, Julich, Germany; Su, Yiki [The University of Tennessee, Knoxville, Tennessee; Nethertom, Tucker [The University of Tennessee, Knoxville, Tennessee; Redding, Caleb [The University of Tennessee, Knoxville, Tennessee; Carr, Scott [The University of Tennessee, Knoxville, Tennessee; Schneidewind, Astrid [Forschungsneutronenquelle Heinz, Garching, Germany; Faulhaber, Enrico [Gemeinsame Forschergruppe HZB, Berlin, Germany; Li, Shiliang [Institute of Physics, Chinese Academy of Sciences, Beijing, China; Yao, Daoxin [Sun Yat-Sen University, Guangzhou, China; Bruckel, Thomas [Institut fur Festkorperforschung, Julich, Germany; Dai, Pengchen [Institute of Physics, Chinese Academy of Sciences, Beijing, China; Sobolev, Oleg [Forschungsneutronenquelle Heinz, Garching, Germany

    2012-06-05

    A determination of the superconducting (SC) electron pairing symmetry forms the basis for establishing a microscopic mechansim for superconductivity. For iron pnictide superconductors, the s{sup {+-}}-pairing symmetry theory predicts the presence of a sharp neutron spin resonance at an energy below the sum of hole and electron SC gap energies (E {le} 2{Delta}). Although the resonances have been observed for various iron pnictide superconductors, they are broad in energy and can also be interpreted as arising from the s{sup ++}-pairing symmetry with E {ge} 2{Delta}. Here we use inelastic neutron scattering to reveal a sharp resonance at E = 7 meV in the SC NaFe{sub 0.935}Co{sub 0.045}As (T{sub c} = 18 K). By comparing our experiments with calculated spin-excitations spectra within the s{sup {+-}} and s{sup ++}-pairing symmetries, we conclude that the resonance in NaFe{sub 0.935}Co{sub 0.045}As is consistent with the s{sup {+-}}-pairing symmetry, thus eliminating s{sup ++}-pairing symmetry as a candidate for superconductivity.

  2. Superconducting transistor

    Science.gov (United States)

    Gray, Kenneth E.

    1979-01-01

    A superconducting transistor is formed by disposing three thin films of superconducting material in a planar parallel arrangement and insulating the films from each other by layers of insulating oxides to form two tunnel junctions. One junction is biased above twice the superconducting energy gap and the other is biased at less than twice the superconducting energy gap. Injection of quasiparticles into the center film by one junction provides a current gain in the second junction.

  3. Electron tunneling into superconducting indium and lead films containing the magnetic impurity manganese

    Energy Technology Data Exchange (ETDEWEB)

    Tsang, Juine-Kai [Univ. of Illinois, Urbana-Champaign, IL (United States). Dept. of Physics

    1980-01-01

    Tunneling measurements of quench-condensed In-Mn and Pb-Mn alloy films were made. The results were compared with Shiba's theory of superconductors containing magnetic impurities. The localized excited impurity states predicted by Shiba's theory were observed in both alloys. In addition to s-wave scattering, it was necessary to include p- and d-wave scattering of the conduction electrons in the theory in order to explain the experimental data. Partial agreement between the theory and the experimental data was obtained using phase shifts from band calculations by A.B. Kunz. The results on In-Mn also agree with thermal conductivity data.

  4. Thermodynamic Properties of κ-(BEDT-TTF2X Salts: Electron Correlations and Superconductivity

    Directory of Open Access Journals (Sweden)

    Yasuhiro Nakazawa

    2012-06-01

    Full Text Available Heat capacity measurements of κ-(BEDT-TTF2X (BEDT-TTF: Bis(ethylendithio tetrathiafulvalene, X: counteranions which are classified as two-dimensional (2D dimer-Mott system are reported. At first, we explain structural and electronic features originated from rigid dimerization in donor arrangement in 2D layers. The antiferromagnetic Mott insulating phase located at low-pressure region in the phase diagram shows vanishing γ electronic heat capacity coefficient in the heat capacity, which claims opening of a charge-gap in this insulating state. Then, a systematic change of the γ around the Mott boundary region is reported in relation to the glass freezing of ethylene dynamics. The thermodynamic parameters determined by ∆Cp/γTc of 10 K class superconductors, κ-(BEDT-TTF2Cu(NCS2 and κ-(BEDT-TTF2Cu[N(CN2]Br demonstrate that a rather large gap with a strong coupling character appears around the Fermi-surface. On the other hand, the low temperature heat capacity clearly shows a picture of nodal-gap structure due to an anisotropic pairing. The comparison with lower Tc compounds in the κ-type structure is also performed so as to discuss overall features of the κ-type superconductors. The heat capacity measurements of hole-doped systems containing mercury in the counteranions show an anomalous enhancement of γ, which is consistent with the T1−1 of NMR experiments etc. The results of heat capacity measurements under high pressures are also reported.

  5. A liquid-helium-free superconducting coil system forming a flat minimum-magnetic-field distribution of an electron cyclotron resonance ion source

    Energy Technology Data Exchange (ETDEWEB)

    Yoshida, Ken-ichi, E-mail: yoshida.kennichi71@jaea.go.jp; Nara, Takayuki; Saitoh, Yuichi; Yokota, Watalu [Takasaki Advanced Radiation Research Institute, Japan Atomic Energy Agency, 1233 Watanuki, Takasaki, Gunma 370-1292 (Japan)

    2014-02-15

    A flat distribution of the minimum magnetic field (flat-B{sub min}) of an electron cyclotron resonance ion source (ECRIS) is expected to perform better in highly charged ion production than classical B{sub min}. To form a flat-B{sub min} structure with a liquid helium-free superconducting device, a coil system of seven coils with four current leads has been designed. The lead number was reduced by connecting the plural coils in series to maintain the flat-B{sub min} structure even when the coil currents are changed for adjustment. This coil system can be operated with a helium-free cryostat, since the estimation of heat from the leads to the coils is nearly equivalent to the existing superconducting ECRIS of a similar type.

  6. 2004 Electron Donor Acceptor Interactions Gordon Conference - August 8-13, 2004

    Energy Technology Data Exchange (ETDEWEB)

    GUILFORD JONES; S ST

    2005-09-14

    The 2004 Gordon Conference on Donor/Acceptor Interactions will take place at Salve Regina University in Newport, Rhode Island on August 8-13, 2004. The conference will be devoted to the consequences of charge interaction and charge motion in molecular and materials systems.

  7. Superconducting interfaces between insulating oxides.

    Science.gov (United States)

    Reyren, N; Thiel, S; Caviglia, A D; Kourkoutis, L Fitting; Hammerl, G; Richter, C; Schneider, C W; Kopp, T; Rüetschi, A-S; Jaccard, D; Gabay, M; Muller, D A; Triscone, J-M; Mannhart, J

    2007-08-31

    At interfaces between complex oxides, electronic systems with unusual electronic properties can be generated. We report on superconductivity in the electron gas formed at the interface between two insulating dielectric perovskite oxides, LaAlO3 and SrTiO3. The behavior of the electron gas is that of a two-dimensional superconductor, confined to a thin sheet at the interface. The superconducting transition temperature of congruent with 200 millikelvin provides a strict upper limit to the thickness of the superconducting layer of congruent with 10 nanometers.

  8. Superconductivity in aromatic hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Kubozono, Yoshihiro, E-mail: kubozono@cc.okayama-u.ac.jp [Research Laboratory for Surface Science, Okayama University, Okayama 700-8530 (Japan); Research Center of New Functional Materials for Energy Production, Storage and Transport, Okayama University, Okayama 700-8530 (Japan); Japan Science and Technology Agency, ACT-C, Kawaguchi 332-0012 (Japan); Goto, Hidenori; Jabuchi, Taihei [Research Laboratory for Surface Science, Okayama University, Okayama 700-8530 (Japan); Yokoya, Takayoshi [Research Laboratory for Surface Science, Okayama University, Okayama 700-8530 (Japan); Research Center of New Functional Materials for Energy Production, Storage and Transport, Okayama University, Okayama 700-8530 (Japan); Kambe, Takashi [Department of Physics, Okayama University, Okayama 700-8530 (Japan); Sakai, Yusuke; Izumi, Masanari; Zheng, Lu; Hamao, Shino; Nguyen, Huyen L.T. [Research Laboratory for Surface Science, Okayama University, Okayama 700-8530 (Japan); Sakata, Masafumi; Kagayama, Tomoko; Shimizu, Katsuya [Center of Science and Technology under Extreme Conditions, Osaka University, Osaka 560-8531 (Japan)

    2015-07-15

    Highlights: • Aromatic superconductor is one of core research subjects in superconductivity. Superconductivity is observed in certain metal-doped aromatic hydrocarbons. Some serious problems to be solved exist for future advancement of the research. This article shows the present status of aromatic superconductors. - Abstract: ‘Aromatic hydrocarbon’ implies an organic molecule that satisfies the (4n + 2) π-electron rule and consists of benzene rings. Doping solid aromatic hydrocarbons with metals provides the superconductivity. The first discovery of such superconductivity was made for K-doped picene (K{sub x}picene, five benzene rings). Its superconducting transition temperatures (T{sub c}’s) were 7 and 18 K. Recently, we found a new superconducting K{sub x}picene phase with a T{sub c} as high as 14 K, so we now know that K{sub x}picene possesses multiple superconducting phases. Besides K{sub x}picene, we discovered new superconductors such as Rb{sub x}picene and Ca{sub x}picene. A most serious problem is that the shielding fraction is ⩽15% for K{sub x}picene and Rb{sub x}picene, and it is often ∼1% for other superconductors. Such low shielding fractions have made it difficult to determine the crystal structures of superconducting phases. Nevertheless, many research groups have expended a great deal of effort to make high quality hydrocarbon superconductors in the five years since the discovery of hydrocarbon superconductivity. At the present stage, superconductivity is observed in certain metal-doped aromatic hydrocarbons (picene, phenanthrene and dibenzopentacene), but the shielding fraction remains stubbornly low. The highest priority research area is to prepare aromatic superconductors with a high superconducting volume-fraction. Despite these difficulties, aromatic superconductivity is still a core research target and presents interesting and potentially breakthrough challenges, such as the positive pressure dependence of T{sub c} that is clearly

  9. Electronic properties of high-temperature superconducting thin films grown by pulsed laser deposition

    Science.gov (United States)

    Abrecht, M.; Ariosa, Daniel; Cloetta, D.; Margaritondo, Giorgio; Pavuna, Davor

    2002-11-01

    We use a pulsed laser deposition (PLD) setup to grow ultra-thin films of high temperature superconductors (HTSC) and transfer them in-situ into a photoemission chamber. Photoemission measurements on such films allow us to study non-cleavable materials, but can also give insights into aspects never measured before, like the influence of strain on the low energy electronic structure. Systematic studies of many different materials grown as films showed that Bi2Sr2CaCu2O8+x, Bi2Sr2Cu1O6+x, Bi2Sr2Ca2Cu3O10+x and La2-xSrxCuO4 films exhibit a conductor-like Fermi edge, but materials containing chains (such as YBa2Cu3O7-x) are prone to very rapid surface degradation, possibly related to critical oxygen loss at the surface. Among HTSC materials, La2-xSrxCuO4 is extremely interesting because of its rather simple structure and the fact that its critical temperature Tc can be enhanced by epitaxial strain. Here we present our first high resolution angular resolved photoemission spectroscopy (ARPES) results on 8 unit-cell thin La2-xSrxCuO4 films on SrLaAlO4 [001] substrates. Due to the lattice mismatch, such films are compressed in the copper oxygen planes and expanded in the c-axis direction. Results show a surprisingly modified Fermi surface compared to the one of non-strained samples.

  10. CONFERENCES AND SYMPOSIA: Collective electron phenomena and electron transport in graphene Scientific Session of the Physical Sciences Division of the Russian Academy Of Sciences (27 February 2008)

    Science.gov (United States)

    Lozovik, Yu E.; Merkulova, S. P.; Sokolik, A. A.; Morozov, S. V.; Novoselov, K. S.; Geim, A. K.

    2008-08-01

    A scientific session of the Physical Sciences Division of the Russian Academy of Sciences (RAS) was held on February 27, 2008 in the conference hall of the Lebedev Physical Institute, RAS. The following reports were presented at the session: (1) Lozovik Yu E, Merkulova S P, Sokolik A A (RAS Institute for Spectroscopy, Troitsk, Moscow Region) "Collective electron phenomena in graphene"; (2) Morozov S V (RAS Institute for Problems in Micro-electronics Technology, Chernogolovka, Moscow Region), Novoselov K S, Geim A K (University of Manchester, Manchester, UK) "Electron transport in graphene." An abridged version of these reports is given below. • Collective electron phenomena in graphene, Yu E Lozovik, S P Merkulova, A A Sokolik Physics-Uspekhi, 2008, Volume 51, Number 7, Pages 727-744 • Electron transport in graphene, S V Morozov, K S Novoselov, A K Geim Physics-Uspekhi, 2008, Volume 51, Number 7, Pages 744-748

  11. International Conference on Free Electron Lasers (11th) Conference Digest Held in Naples, Florida on 28 August-1 September 1989

    Science.gov (United States)

    1989-12-01

    Kawarasaki. 165 P2.35 ENERGY MEASUREMENT OF THE ELECTRON BEAM BEYOND THE PALADIN WIGGLER, J. Edighoffer, Y.P. Chong, P. Lee, T.J. Orzechowski, A.C. Paul ...W.E. Nexsen, D.P. Atkinson, D.M. Barrett, Y.C. Chen, J.C. Clark, L.V. Griffith, H.C. Kirbie, M.A. Newton, A.C. Paul , S, Sampayan, A.L. Throop, W.C...Granatstein. 237 P3.20 ONDINE:STUDIES ABOUT A HIGH POWER MICROWA VE, FEL A TC.E.S. T.A., H. Bottollier-Curtet, J. Bardy, C. Bonnafond, C. Bruno, J. Delvaux

  12. Physics of electrons in solids: Volume 1 - Solid state physics, band structure, superconductivity and magnetism; Volume 2 - Solid state physics, exercises and problems with keys; Physique des electrons dans les solides: Tome 1, structure de bandes, supraconductivite et magnetisme. Physique des electrons dans les solides: Tome 2, recueil d'exercices et de problemes

    Energy Technology Data Exchange (ETDEWEB)

    Alloul, H. [Paris-11 Univ., 91 - Orsay (France). Lab. de Physique des Solides

    2007-07-01

    The diversity of the macroscopic properties of solids like magnetism or superconductivity stems from the quantum states of electrons. Today only the experimental approach reveals the spectacular effects of these properties but basic concepts of quantum mechanics and of statistical physics are necessary to give an account of the link between the microscopic scale and the macroscopic world. The simple approach involving independent electrons gives a description of the electronic structure as energy bands that explains the existence of metals, isolators and semi-conductors. Magnetism and superconductivity can be understood only by taking into account the existence of correlations between the electrons in the solids. The first tome presents the formalism of quantum mechanics applied to the system formed by nuclei and the electrons in solids. Different issues like electronic structures in solids, electron transport, the microscopic origin of superconductivity, the magnetism of isolators, the dynamics of spin and magnetic resonance are explained. The second volume can be divided into 2 parts, the first part giving the keys of the questions arisen in the first volume while the second part propose a series of problems (with keys). These problems illustrate the topics presented in the first volume and deal with issues like optical properties of solids, electron bands, Peierls transition, phonons in solids, isolator-metal transition, cyclotron resonance, superconductivity of NbSe{sub 2}, electronic properties of La{sub 2}CuO{sub 4}, or the magnetism of thin films. (A.C.)

  13. Recent developments in superconducting materials including ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Tachikawa, Kyoji

    1987-06-01

    This report describes the history of superconduction starting in 1911, when the superconducting phenomenon was first observed in murcury, until the recent discovery of superconducting materials with high critical temperatures. After outlining the BCS theory, basic characteristics are discussed including the critical temperature, magnetic field and current density to be reached for realizing the superconducting state. Various techniques for practical superconducting materials are discussed, including methods for producing extra fine multiconductor wires from such superconducting alloys as Nb-Ti, intermetallic Nb/sub 3/Sn compound and V/sub 3/Ga, as well as methods for producing wires of Nb/sub 3/Al, Nb/sub 3/(Al, Ge) and Nb/sub 3/Ge such as continuous melt quenching, electron beam irradiation, laser beam irradiation and chemical evaporation. Characteristics of superconducting ceramics are described, along with their applications including superconducting magnets and superconducting elements. (15 figs, 1 tab, 19 refs)

  14. Electronic and magnetic phase diagram of beta-Fe(1.01)Se with superconductivity at 36.7 K under pressure.

    Science.gov (United States)

    Medvedev, S; McQueen, T M; Troyan, I A; Palasyuk, T; Eremets, M I; Cava, R J; Naghavi, S; Casper, F; Ksenofontov, V; Wortmann, G; Felser, C

    2009-08-01

    The discovery of new high-temperature superconductors based on FeAs has led to a new 'gold rush' in high-T(C) superconductivity. All of the new superconductors share the same common structural motif of FeAs layers and reach T(C) values up to 55 K (ref. 2). Recently, superconductivity has been reported in FeSe (ref. 3), which has the same iron pnictide layer structure, but without separating layers. Here, we report the magnetic and electronic phase diagram of beta-Fe(1.01)Se as a function of temperature and pressure. The superconducting transition temperature increases from 8.5 to 36.7 K under an applied pressure of 8.9 GPa. It then decreases at higher pressures. A marked change in volume is observed at the same time as T(C) rises, owing to a collapse of the separation between the Fe(2)Se(2) layers. No static magnetic ordering is observed for the whole p-T phase diagram. We also report that at higher pressures (starting around 7 GPa and completed at 38 GPa), Fe(1.01)Se transforms to a hexagonal NiAs-type structure and exhibits non-magnetic behaviour.

  15. The electronic structure of Nb3Al/Nb3Sn, a new test case for flat/steep band model of superconductivity

    Institute of Scientific and Technical Information of China (English)

    Yanlong Ding; Shuiquan Deng; Yong Zhao

    2014-01-01

    In this work, we choose Nb3Al/Nb3Sn as a new test case for flat/steep band model of superconductivity. Based on the density functional theory in the generalized gradient approximation, the electronic structure of Nb3Al/Nb3Sn has been studied. The obtained results agree well with those of the earlier studies and show clearly flat bands around the Fermi level. The steep bands as characterized in this work locate around the M point in the first Brillouin zone. The obtained results reveal that Nb3Al/Nb3Sn fits more to the ‘‘Flat/steep’’ band model than to the van-Hove singularity scenario. The flat/steep band condition for superconductivity implies a different thermodynamic behavior of superconductors other than that predicted from the conventional BCS theory. This observation sets up an indicator for selecting a suitable superconductor when its large-scale industrial use is needed, for example, in superconducting maglev system or ITER project.

  16. Electronic and magnetic phase diagram of [Beta]Fe[subscript1.01]Se with superconductivity at 36.7 K under pressure

    Energy Technology Data Exchange (ETDEWEB)

    Medvedev, S.; McQueen, T.M.; Troyan, I.A.; Palasyuk, T.; Eremets, M.I.; Cava, R.J.; Naghavi, S.; Casper, F.; Ksenofontov, V.; Wortmann, G.; Felser, C.; (Paderborn); (MXPL-M); (Mainz); (Princeton)

    2010-09-17

    The discovery of new high-temperature superconductors based on FeAs has led to a new 'gold rush' in high-T{sub C} superconductivity. All of the new superconductors share the same common structural motif of FeAs layers and reach T{sub C} values up to 55 K. Recently, superconductivity has been reported in FeSe, which has the same iron pnictide layer structure, but without separating layers. Here, we report the magnetic and electronic phase diagram of {beta}-Fe{sub 1.01}Se as a function of temperature and pressure. The superconducting transition temperature increases from 8.5 to 36.7 K under an applied pressure of 8.9 GPa. It then decreases at higher pressures. A marked change in volume is observed at the same time as T{sub C} rises, owing to a collapse of the separation between the Fe{sub 2}Se{sub 2} layers. No static magnetic ordering is observed for the whole p-T phase diagram. We also report that at higher pressures (starting around 7 GPa and completed at 38 GPa), Fe{sub 1.01}Se transforms to a hexagonal NiAs-type structure and exhibits non-magnetic behavior.

  17. Electronic and magnetic phase diagram of β-Fe1.01Se with superconductivity at 36.7K under pressure

    Science.gov (United States)

    Medvedev, S.; McQueen, T. M.; Troyan, I. A.; Palasyuk, T.; Eremets, M. I.; Cava, R. J.; Naghavi, S.; Casper, F.; Ksenofontov, V.; Wortmann, G.; Felser, C.

    2009-08-01

    The discovery of new high-temperature superconductors based on FeAs has led to a new `gold rush' in high-TC superconductivity. All of the new superconductors share the same common structural motif of FeAs layers and reach TC values up to 55K (ref. 2). Recently, superconductivity has been reported in FeSe (ref. 3), which has the same iron pnictide layer structure, but without separating layers. Here, we report the magnetic and electronic phase diagram of β-Fe1.01Se as a function of temperature and pressure. The superconducting transition temperature increases from 8.5 to 36.7K under an applied pressure of 8.9GPa. It then decreases at higher pressures. A marked change in volume is observed at the same time as TC rises, owing to a collapse of the separation between the Fe2Se2 layers. No static magnetic ordering is observed for the whole p-T phase diagram. We also report that at higher pressures (starting around 7GPa and completed at 38GPa), Fe1.01Se transforms to a hexagonal NiAs-type structure and exhibits non-magnetic behaviour.

  18. International Workshop on Novel Mechanisms of Superconductivity

    CERN Document Server

    Wolf, Stuart A; Novel superconductivity

    1987-01-01

    The Novel Mechanisms of Superconductivity Conference was initially conceived in the early part of 1986 as a small, 2-1/2 day workshop of 40-70 scientists, both theorists and experimentalists interested in exploring the possible evidence for exotic, non phononic superconductivity. Of course, the historic discoveries of high temperature oxide superconductors by Bednorz and Mftller and the subsequent enhancements by the Houston/Alabama groups made such a small conference impractical. The conference necessarily had to expand, 2-1/2 days became 4-1/2 days and superconductivity in the high Tc oxides became the largest single topic in the workshop. In fact, this conference became the first major conference on this topic and thus, these proceedings are also the first maj or publication. However, heavy fermion, organic and low carrier concentration superconductors remained a very important part of this workshop and articles by the leaders in these fields are included in these proceedings. Ultimately the work...

  19. Unconventional superconductivity in honeycomb lattice

    Directory of Open Access Journals (Sweden)

    P Sahebsara

    2013-03-01

    Full Text Available   ‎ The possibility of symmetrical s-wave superconductivity in the honeycomb lattice is studied within a strongly correlated regime, using the Hubbard model. The superconducting order parameter is defined by introducing the Green function, which is obtained by calculating the density of the electrons ‎ . In this study showed that the superconducting order parameter appears in doping interval between 0 and 0.5, and x=0.25 is the optimum doping for the s-wave superconductivity in honeycomb lattice.

  20. Superconductivity in graphite intercalation compounds

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Robert P. [Cavendish Laboratory, University of Cambridge, Madingley Road, Cambridge CB3 0HE (United Kingdom); Weller, Thomas E.; Howard, Christopher A. [Department of Physics & Astronomy, University College of London, Gower Street, London WCIE 6BT (United Kingdom); Dean, Mark P.M. [Department of Condensed Matter Physics and Materials Science, Brookhaven National Laboratory, Upton, NY 11973 (United States); Rahnejat, Kaveh C. [Department of Physics & Astronomy, University College of London, Gower Street, London WCIE 6BT (United Kingdom); Saxena, Siddharth S. [Cavendish Laboratory, University of Cambridge, Madingley Road, Cambridge CB3 0HE (United Kingdom); Ellerby, Mark, E-mail: mark.ellerby@ucl.ac.uk [Department of Physics & Astronomy, University College of London, Gower Street, London WCIE 6BT (United Kingdom)

    2015-07-15

    Highlights: • Historical background of graphite intercalates. • Superconductivity in graphite intercalates and its place in the field of superconductivity. • Recent developments. • Relevant modeling of superconductivity in graphite intercalates. • Interpretations that pertain and questions that remain. - Abstract: The field of superconductivity in the class of materials known as graphite intercalation compounds has a history dating back to the 1960s (Dresselhaus and Dresselhaus, 1981; Enoki et al., 2003). This paper recontextualizes the field in light of the discovery of superconductivity in CaC{sub 6} and YbC{sub 6} in 2005. In what follows, we outline the crystal structure and electronic structure of these and related compounds. We go on to experiments addressing the superconducting energy gap, lattice dynamics, pressure dependence, and how these relate to theoretical studies. The bulk of the evidence strongly supports a BCS superconducting state. However, important questions remain regarding which electronic states and phonon modes are most important for superconductivity, and whether current theoretical techniques can fully describe the dependence of the superconducting transition temperature on pressure and chemical composition.

  1. Peltier cooling for the superconducting electronics. Final report; Peltier-Kuehlung fuer die Supraleitungs-Elektronik. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Straehle, J.; Huebener, R.P. [Tuebingen Univ. (Germany). Lehrstuhl fuer Experimentalphysik 2; Kemmler-Sack, S.; Rath, S. [Tuebingen Univ. (Germany). Inst. fuer Anorganische Chemie

    1999-12-01

    The project has concentrated on the semiconductor systems Bi{sub 0,52}Sb{sub 1,48}Te{sub 3} doped with Se, Pb and Te (p-doping) and Bi{sub 2}Te{sub 3-y}Se{sub y} (n-doping), which at present represent the dominating class of materials for Peltier-cooling. It was the main goal of our experiments to find out if the thermo-electric figure of merit between 150 and 300 K can be considerably improved by means of powder metallurgical preparation techniques. During the variation of the preparation parameters more than 300 samples were fabricated and measured regarding their relevant transport properties. Based on these results we have constructed a 7-stage-cascade, which produced at the cold end a temperature of 136 K with a temperature of 285 K on the warm side. These results indicate that there is a realistic chance to reach the transition temperature T{sub c}=134 K of the cuprate superconductor HgBa{sub 2}Ca{sub 2}Cu{sub 3}O{sub 8+}{delta} by Peltier-cooling alone. In our project we have also shown that a single Peltier-cooling stage can find an important application in the superconducting power-electronics (current lead, fault current limiter). Peltier-cooling with ac-current is also subject of a patent application. (orig.) [German] Die in der Peltier-Kuehltechnik vorrangig benutzten Halbleiter Bi{sub 0.52}Sb{sub 1.48}Te{sub 3} mit Se, Pb, oder Te-Dotierung (p-Halbleiter) sowie Bi{sub 2}Te{sub 3-y}Se{sub y} (n-Halbleiter) wurden als Ausgangsmaterialien verwendet, um herauszufinden, ob sich durch neue pulvermetallurgische Praeparationsverfahren der thermoelektrische Guetefaktor im Temperaturbereich zwischen 150 und 300 K deutlich verbessern laesst. Bei der Variation der Praeparationsparameter wurden mehr als 300 Proben hergestellt und im Hinblick auf ihre relevanten Transporteigenschaften vermessen. Auf diesen Ergebnissen aufbauend, wurde eine 7-stufige Kaskade konstruiert, die bei einer Warmseitentemperatur von 285 K auf der letzten Stufe den Temperaturwert von 136 K

  2. Localized electronic states and photoemission superconducting condensate in Bi 2Sr 2CaCu 2O 8+x

    Science.gov (United States)

    Ma, Jian; Quitmann, C.; Kelley, R. J.; Margaritondo, G.; Onellion, M.

    1995-04-01

    We present the first detailed angle-resolved photoemission evidence that there are two types of carriers that contribute to the photoe-mission superconducting condensate in Bi 2Sr 2CaCu 2O 8+x. Our data indicate that both itinerant and somewhat localized normal state carriers can contribute to the formation of Cooper pairs.

  3. Superconducting Electronic Film Structures.

    Science.gov (United States)

    1988-01-24

    Research Society Extended Abstracts, Japanese Journal of Applied Physics (Pccecd-*: f LT-18) "d Applied PLslac Lett~ar. A summary of all the work on...77K in vacuum. Very high gap voltages were observed corresponding to 2A/kBTc - 11. The results were published in the Japanese Journal of Applied Physics (Proceedings

  4. High temperature interfacial superconductivity

    Science.gov (United States)

    Bozovic, Ivan [Mount Sinai, NY; Logvenov, Gennady [Port Jefferson Station, NY; Gozar, Adrian Mihai [Port Jefferson, NY

    2012-06-19

    High-temperature superconductivity confined to nanometer-scale interfaces has been a long standing goal because of potential applications in electronic devices. The spontaneous formation of a superconducting interface in bilayers consisting of an insulator (La.sub.2CuO.sub.4) and a metal (La.sub.1-xSr.sub.xCuO.sub.4), neither of which is superconducting per se, is described. Depending upon the layering sequence of the bilayers, T.sub.c may be either .about.15 K or .about.30 K. This highly robust phenomenon is confined to within 2-3 nm around the interface. After exposing the bilayer to ozone, T.sub.c exceeds 50 K and this enhanced superconductivity is also shown to originate from a 1 to 2 unit cell thick interfacial layer. The results demonstrate that engineering artificial heterostructures provides a novel, unconventional way to fabricate stable, quasi two-dimensional high T.sub.c phases and to significantly enhance superconducting properties in other superconductors. The superconducting interface may be implemented, for example, in SIS tunnel junctions or a SuFET.

  5. Electronic state and superconductivity of YBa2Cu3-xO7-y (M=Al,Zn and Sn) systems

    Science.gov (United States)

    Zhao, Y.; Zhang, Q. R.; Zhang, H.

    1990-01-01

    A series of YBa2Cu(3-x)MxO(7-y) (M=Al,Zn and Sn) single phase samples were prepared, and the measurements of the crystal structure, oxygen content, electric resistivity, thermoelectric power, Mossbauer spectrum, XPS and superconductivity were performed. The experimental results of X ray powder diffraction, Mossbauer spectrum and oxygen content show that the Zn(2+) and the Al(3+) occupy the Cu(2) site in Cu-O planes and the Cu(1) site in Cu-O chains respectively, but the Sn(4+) occupies both the Cu(1) sites. As regards the properties in superconducting state, both the Zn(2+) and the Al(3+) depress T(sub c) strongly, but the Sn(4+) does not. As for the electronic transport properties in normal state, the system doped by Al(3+) displays a rapid increase of resistivity and some electron localization-like effects, and the thermoelectric power enhances obviously; the series contained Zn(2+) almost shows no changes of electric resistivity but the sign of the thermoelectric power is reversed. Other results are given and briefly discussed.

  6. Progress Towards High-Sensitivity Arrays of Detectors of Sub-mm Radiation using Superconducting Tunnel Junctions with Radio-Frequency Single-Electron Transistors

    Science.gov (United States)

    Stevenson, T. R.; Hsieh, W.-T.; Li, M. J.; Stahle, C. M.; Wollack, E. J.; Schoelkopf, R. J.; Krebs, Carolyn (Technical Monitor)

    2002-01-01

    The science drivers for the SPIRIT/SPECS missions demand sensitive, fast, compact, low-power, large-format detector arrays for high resolution imaging and spectroscopy in the far infrared and submillimeter. Detector arrays with 10,000 pixels and sensitivity less than 10(exp 20)-20 W/Hz(exp 20)0.5 are needed. Antenna-coupled superconducting tunnel junction detectors with integrated rf single-electron transistor readout amplifiers have the potential for achieving this high level of sensitivity, and can take advantage of an rf multiplexing technique when forming arrays. The device consists of an antenna structure to couple radiation into a small superconducting volume and cause quasiparticle excitations, and a single-electron transistor to measure currents through tunnel junction contacts to the absorber volume. We will describe optimization of device parameters, and recent results on fabrication techniques for producing devices with high yield for detector arrays. We will also present modeling of expected saturation power levels, antenna coupling, and rf multiplexing schemes.

  7. Study of superconducting and non-superconducting (Cu, Cr)-1212 compounds by high-resolution TEM and electron energy loss spectroscopy

    CERN Document Server

    Anan, Y; Kurami, H; Hatano, J; Tsutsumi, S; Kimoto, K; Matsui, Y

    2001-01-01

    Structure of YSr/sub 2-x/Ba/sub x/Cu/sub 2.8/Cr/sub 0.2/O/sub y/ (x =0-1.5) superconductors are examined by electron diffraction, HRTEM and electron energy loss spectroscopy (EELS). YSr/sub 2/Cu/sub 2.8/Cr /sub 0.2/O/sub y/ (x=0) shows incommensurate superstructure with 3.67a/sub 0/ due to lattice strain and mixed intergrowth of -(Cr-Cu- Cu-Cu-Cr)- and -(Cr-Cu-Cu-Cr)- sequences. In the h 0 l electron diffraction pattern the wavevector [~0.27, 0, 1/2] due to the incommensurate superstructure disappear in the crystal with high Ba contain (x>or=1.0). This suggests that structural distortion decreases with Ba substitution. At the same time, Cr-L3, L2 edge of EELS spectra shifts toward the low-energy side with increase of Ba content. (13 refs).

  8. Nonlinearities in Microwave Superconductivity

    OpenAIRE

    Ledenyov, Dimitri O.; Ledenyov, Viktor O.

    2012-01-01

    The research is focused on the modeling of nonlinear properties of High Temperature Superconducting (HTS) thin films, using Bardeen, Cooper, Schrieffer and Lumped Element Circuit theories, with purpose to enhance microwave power handling capabilities of microwave filters and optimize design of microwave circuits in micro- and nano- electronics.

  9. Development of Low Level RF Control Systems for Superconducting Heavy Ion Linear Accelerators, Electron Synchrotrons and Storage Rings

    CERN Document Server

    Aminov, Bachtior; Kolesov, Sergej; Pekeler, Michael; Piel, Christian; Piel, Helmut

    2005-01-01

    Since 2001 ACCEL Instruments is supplying low level RF control systems together with turn key cavity systems. The early LLRF systems used the well established technology based on discrete analogue amplitude and phase detectors and modulators. Today analogue LLRF systems can make use of advanced vector demodulators and modulators combined with a fast computer controlled analogue feed back loop. Feed forward control is implemented to operate the RF cavity in an open loop mode or to compensate for predictable perturbations. The paper will introduce the general design philosophy and show how it can be adapted to different tasks as controlling a synchrotron booster nc RF system at 500 MHz, or superconducting storage ring RF cavities, as well as a linear accelerator at 176 MHz formed by a chain of individually driven and controlled superconducting λ/2 cavities.

  10. Measurements and analysis of Hall effect of a two dimensional electron gas in the close proximity of a superconducting YBa2Cu3O(7 - x) film

    Science.gov (United States)

    Tseng, M. Z.; Jiang, W. N.; Hu, E. L.

    1994-09-01

    A direct integration of YBa2Cu3O(7 - x) and a two dimensional electron gas Hall probe was made possible through the use of a MgO buffer layer. We demonstrate the use of this structure for the measurements of the magnetization hysteresis of a superconducting YBa2Cu3O(7 - x) thin film, and we make an estimate of the sensitivity and resolution that can be achieved with this probe structure. The close proximity of the YBa2Cu3O(7 - x) to the two dimensional electron gas (approximately 1700 A) allows sensitive measurements of interactions between the two; more importantly, closer superconductor-semiconductor spacing can be achieved without severe compromise of the component material quality.

  11. Probing electronic phase transitions with phonons via inelastic neutron scattering: superconductivity in borocarbides, charge and magnetic order in manganites

    Energy Technology Data Exchange (ETDEWEB)

    Weber, F.

    2007-11-02

    The present thesis concentrates on the signatures of strong electron-phonon coupling in phonon properties measured by inelastic neutron scattering. The inelastic neutron scattering experiments were performed on the triple-axis spectrometers 1T and DAS PUMA at the research reactors in Saclay (France) and Munich (Germany), respectively. The work is subdivided into two separate chapters: In the first part, we report measurements of the lattice dynamical properties, i.e. phonon frequency, linewidth and intensity, of the conventional, i.e. phonon-mediated, superconductor YNi{sub 2}B{sub 2}C of the rare-earth-borocarbide family. The detailed check of theoretical predictions for these properties, which were calculated in the theory group of our institute, was one major goal of this work. We measured phonons in the normal state, i.e. T>T{sub c}, for several high symmetry directions up to 70 meV. We were able to extract the full temperature dependence of the superconducting energy gap 2{delta}(T) from our phonon scans with such accuracy that even deviations from the weak coupling BCS behaviour could be clearly observed. By measuring phonons at different wave vectors we demonstrated that phonons are sensitive to the gap anisotropy under the precondition, that different phonons get their coupling strength from different parts of the Fermi surface. In the second part, we investigated the properties of Mn-O bond-stretching phonons in the bilayer manganite La{sub 2-2x}Sr{sub 1+2x}Mn{sub 2}O{sub 7}. At the doping level x=0.38 this compound has an ferromagnetic groundstate and exhibits the so-called colossal magnetoresistance effect in the vicinity of the Curie temperature T{sub C}. The atomic displacement patterns of the investigated phonons closely resemble possible Jahn-Teller distortions of the MnO{sub 6} octahedra, which are introduced in this compound by the Jahn-Teller active Mn{sup 3+} ions. We observed strong renormalizations of the phonon frequencies and clear peaks of

  12. Surface electronic structure and evidence of plain s -wave superconductivity in (L i0.8F e0.2)OHFeSe

    Science.gov (United States)

    Yan, Y. J.; Zhang, W. H.; Ren, M. Q.; Liu, X.; Lu, X. F.; Wang, N. Z.; Niu, X. H.; Fan, Q.; Miao, J.; Tao, R.; Xie, B. P.; Chen, X. H.; Zhang, T.; Feng, D. L.

    2016-10-01

    (L i0.8F e0.2)OHFeSe is a newly discovered intercalated iron-selenide superconductor with a Tc above 40 K, which is much higher than the Tc of bulk FeSe (8 K). Here we report a systematic study of (L i0.8F e0.2)OHFeSe by low temperature scanning tunneling microscopy (STM). We observed two kinds of surface terminations, namely FeSe and (L i0.8F e0.2)OH surfaces. On the FeSe surface, the superconducting state is fully gapped with double coherence peaks, and a vortex core state with split peaks near EF is observed. Through quasiparticle interference (QPI) measurements, we clearly observed intra- and interpocket scatterings in between the electron pockets at the M point, as well as some evidence of scattering that connects Γ and M points. Upon applying the magnetic field, the QPI intensity of all the scattering channels are found to behave similarly. Furthermore, we studied impurity effects on the superconductivity by investigating intentionally introduced impurities and intrinsic defects. We observed that magnetic impurities such as Cr adatoms can induce in-gap states and suppress superconductivity. However, nonmagnetic impurities such as Zn adatoms do not induce visible in-gap states. Meanwhile, we show that Zn adatoms can induce in-gap states in thick FeSe films, which is believed to have an s±-wave pairing symmetry. Our experimental results suggest it is likely that (L i0.8F e0.2)OHFeSe is a plain s -wave superconductor, whose order parameter has the same sign on all Fermi surface sections.

  13. Superconductivity in doped Dirac semimetals

    Science.gov (United States)

    Hashimoto, Tatsuki; Kobayashi, Shingo; Tanaka, Yukio; Sato, Masatoshi

    2016-07-01

    We theoretically study intrinsic superconductivity in doped Dirac semimetals. Dirac semimetals host bulk Dirac points, which are formed by doubly degenerate bands, so the Hamiltonian is described by a 4 ×4 matrix and six types of k -independent pair potentials are allowed by the Fermi-Dirac statistics. We show that the unique spin-orbit coupling leads to characteristic superconducting gap structures and d vectors on the Fermi surface and the electron-electron interaction between intra and interorbitals gives a novel phase diagram of superconductivity. It is found that when the interorbital attraction is dominant, an unconventional superconducting state with point nodes appears. To verify the experimental signature of possible superconducting states, we calculate the temperature dependence of bulk physical properties such as electronic specific heat and spin susceptibility and surface state. In the unconventional superconducting phase, either dispersive or flat Andreev bound states appear between point nodes, which leads to double peaks or a single peak in the surface density of states, respectively. As a result, possible superconducting states can be distinguished by combining bulk and surface measurements.

  14. Characteristics of the Shanghai high-temperature superconducting electron-beam ion trap and studies of the space-charge effect under ultralow-energy operating conditions

    Science.gov (United States)

    Tu, B.; Lu, Q. F.; Cheng, T.; Li, M. C.; Yang, Y.; Yao, K.; Shen, Y.; Lu, D.; Xiao, J.; Hutton, R.; Zou, Y.

    2017-10-01

    A high-temperature superconducting electron-beam ion trap (EBIT) has been set up at the Shanghai EBIT Laboratory for spectroscopic studies of low-charge-state ions. In the study reported here, beam trajectory simulations are implemented in order to provide guidance for the operation of this EBIT under ultralow-energy conditions, which has been successfully achieved with a full-transmission electron-beam current of 1-8.7 mA at a nominal electron energy of 30-120 eV. The space-charge effect is studied through both simulations and experiments. A modified iterative formula is proposed to estimate the space-charge potential of the electrons and shows very good agreement with the simulation results. In addition, space-charge compensation by trapped ions is found in extreme ultraviolet spectroscopic measurements of carbon ions and is studied through simulation of ion behavior in the EBIT. Based on the simulation results, the ion-cloud radius, ion density, and electron-ion overlap are obtained.

  15. Sixteenth International Conference on the physics of electronic and atomic collisions

    Energy Technology Data Exchange (ETDEWEB)

    Dalgarno, A.; Freund, R.S.; Lubell, M.S.; Lucatorto, T.B. (eds.)

    1989-01-01

    This report contains abstracts of papers on the following topics: photons, electron-atom collisions; electron-molecule collisions; electron-ion collisions; collisions involving exotic species; ion- atom collisions, ion-molecule or atom-molecule collisions; atom-atom collisions; ion-ion collisions; collisions involving rydberg atoms; field assisted collisions; collisions involving clusters and collisions involving condensed matter.

  16. Structural, elastic and electronic properties of superconducting anti-perovskites MgCNi 3, ZnCNi 3 and CdCNi 3 from first principles

    Science.gov (United States)

    Shein, I. R.; Bannikov, V. V.; Ivanovskii, A. L.

    2008-01-01

    First principle total energy calculations using the full potential linearized augmented plane wave (FP-LAPW) method with the generalized gradient approximation (GGA) for the exchange-correlation potential were performed to investigate the systematic trends for structural, elastic and electronic properties of the family of superconducting anti-perovskites MCNi 3 depending from the type of M cations (M are Mg, Zn and Cd). In result the optimized lattice parameters, independent elastic constants ( C11, C12 and C44), bulk modulus B, compressibility β, shear modulus G and tetragonal shear modulus G‧ are evaluated. Further, for the first time the numerical estimates of a set of elastic parameters (bulk and shear modulus, Young’s modulus Y, Poisson’s ratio ( ν), Lamé’s coefficients ( μ, λ)) of the polycrystalline superconducting MCNi 3 ceramics (in framework of the Voigt-Reuss-Hill approximation) were performed. Besides, the band structures, densities of states (DOS), total and site-projected l-decomposed DOS at the Fermi level, the shapes of the Fermi surfaces, the Sommerfeld’s coefficients and the molar Pauli paramagnetic susceptibility for these anti-perovskites were obtained and analyzed in comparison with the available theoretical and experimental data.

  17. Hybridization and suppression of the superconductivity in CeFeAsO1-y. Pressure and temperature dependences of the electronic structure

    Energy Technology Data Exchange (ETDEWEB)

    Yamaoka, Hitoshi [Inst. of Physical and Chemical Research (RIKEN), Wako (Japan); Jarrige, Ignace [Japan Atomic Energy Agency (JAEA), Hyogo (Japan); Ikeda-Ohno, Atsushi [Japan Atomic Energy Agency (JAEA), Hyogo (Japan); Tsutsui, Satoshi [Japan Synchrotron Radiation Research Inst., Hyogo (Japan); Lin, Jung-Fu [Univ. of Texas, Austin, TX (United States); Takeshita, Nao [National Inst. of Advanced Industrial Science adn Technology (AIST), Ibaraki (Japan); Transformative Research-Project on Iron Pnictides (TRIP), Tokyo (Japan); Miyazawa, Kiichi [National Inst. of Advanced Industrial Science adn Technology (AIST), Ibaraki (Japan); Transformative Research-Project on Iron Pnictides (TRIP), Tokyo (Japan); Tokyo Univ. of Science, Chiba (Japan); Iyo, Akira [National Inst. of Advanced Industrial Science adn Technology (AIST), Ibaraki (Japan); Transformative Research-Project on Iron Pnictides (TRIP), Tokyo (Japan); Tokyo Univ. of Science, Chiba (Japan); Kito, Hijiri [National Inst. of Advanced Industrial Science adn Technology (AIST), Ibaraki (Japan); Transformative Research-Project on Iron Pnictides (TRIP), Tokyo (Japan); Eisaki, Hiroshi [National Inst. of Advanced Industrial Science adn Technology (AIST), Ibaraki (Japan); Transformative Research-Project on Iron Pnictides (TRIP), Tokyo (Japan); Hiraoka, Nozomu [National Synchrotron Radiation Research Center, Hsinchu (Taiwan); Ishii, Hirofumi [National Synchrotron Radiation Research Center, Hsinchu (Taiwan); Tsuei, Ku-Ding [National Synchrotron Radiation Research Center, Hsinchu (Taiwan)

    2010-09-23

    Pressure and temperature dependence of the electronic structure of superconducting (SC) CeFeAsO1-y and non-SC CeFeAsO1-y have been investigated using two complementary hard x-ray spectroscopic probes at the Ce L3 edge, partial fluorescence yield x-ray absorption spectroscopy and resonant x-ray emission spectroscopy. With increasing pressure, the ratio between the intensity of the peak related to the f0 (Ce4+ ) state and that of the f1 (Ce3+ ) state, I(f0)/I(f1 ), is found to increase continuously for both compounds, indicating a continuous increase in the Ce valence. The valence of non-SC CeFeAsO1-y is found to be slightly higher than that of SC CeFeAsO1-y in the entire pressure and temperature ranges of this study. The valence of CeFeAsO1-y around 6 GPa, where the superconductivity breaks down, is estimated to be ~3.0 , but no change in the valence is observed upon cooling. The dependence of the interatomic distances on the concentration of oxygen vacancies is studied via extended absorption fine structure spectroscopy.

  18. A study of beam position diagnostics using beam-excited dipole modes in third harmonic superconducting accelerating cavities at a free-electron laser

    CERN Document Server

    Zhang, P; Jones, R M; Shinton, I R R; Flisgen, T; Glock, H W

    2012-01-01

    We investigate the feasibility of beam position diagnostics using Higher Order Mode (HOM) signals excited by an electron beam in the third harmonic 3.9 GHz superconducting accelerating cavities at FLASH. After careful theoretical and experimental assessment of the HOM spectrum, three modal choices have been narrowed down to fulfill different diagnostics requirements. These are localized dipole beam-pipe modes, trapped cavity modes from the fifth dipole band and propagating modes from the first two dipole bands. These modes are treated with various data analysis techniques: modal identification, direct linear regression (DLR) and singular value decomposition (SVD). Promising options for beam diagnostics are found from all three modal choices. This constitutes the first prediction, subsequently confirmed by experiments, of trapped HOMs in third harmonic cavities, and also the first direct comparison of DLR and SVD in the analysis of HOM-based beam diagnostics.

  19. A study of beam position diagnostics using beam-excited dipole modes in third harmonic superconducting accelerating cavities at a free-electron laser

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Pei [School of Physics and Astronomy, University of Manchester, Manchester M13 9PL (United Kingdom); Deutsches Elektronen-Synchrotron (DESY), 22607 Hamburg (Germany); Baboi, Nicoleta [Deutsches Elektronen-Synchrotron (DESY), 22607 Hamburg (Germany); Jones, Roger M.; Shinton, Ian R. R. [School of Physics and Astronomy, University of Manchester, Manchester M13 9PL (United Kingdom); Cockcroft Institute, Cheshire WA4 4AD (United Kingdom); Flisgen, Thomas; Glock, Hans-Walter [Institut fuer Allgemeine Elektrotechnik, Universitaet Rostock, 18051 Rostock (Germany)

    2012-08-15

    We investigate the feasibility of beam position diagnostics using higher order mode (HOM) signals excited by an electron beam in the third harmonic 3.9 GHz superconducting accelerating cavities at FLASH. After careful theoretical and experimental assessment of the HOM spectrum, three modal choices have been narrowed down to fulfill different diagnostics requirements. These are localized dipole beam-pipe modes, trapped cavity modes from the fifth dipole band, and propagating modes from the first two dipole bands. These modes are treated with various data analysis techniques: modal identification, direct linear regression (DLR), and singular value decomposition (SVD). Promising options for beam diagnostics are found from all three modal choices. This constitutes the first prediction, subsequently confirmed by experiments, of trapped HOMs in third harmonic cavities, and also the first direct comparison of DLR and SVD in the analysis of HOM-based beam diagnostics.

  20. Electron density distribution in BaPb{sub 1-x}Sb{sub x}O{sub 3} superconducting oxides studied by double nuclear magnetic resonance methods

    Energy Technology Data Exchange (ETDEWEB)

    Piskunov, Yu. V., E-mail: piskunov@imp.uran.ru; Ogloblichev, V. V.; Arapova, I. Yu.; Sadykov, A. V.; Gerashchenko, A. P.; Verkhovskii, S. V. [Russian Academy of Sciences, Institute of Metal Physics, Ural Branch (Russian Federation)

    2011-11-15

    The effect of charge disorder on the formation of an inhomogeneous state of the electron system in the conduction band in BaPb{sub 1-x}Sb{sub x}O{sub 3} superconducting oxides is investigated experimentally by NMR methods. The NMR spectra of {sup 17}O are measured systematically, and the contributions from {sup 17}O atoms with different cation nearest surroundings are identified. It is found that microscopic regions with an elevated spin density of charge carriers are formed within two coordination spheres near antimony ions. Nuclei of the superconducting phase of the oxide (regions with an elevated antimony concentration) microscopically distributed over the sample are detected in compounds with x = 0.25 and 0.33. Experiments in which a double resonance signal of the spin echo of {sup 17}O-{sup 207}Pb and {sup 17}O-{sup 121}Sb are measured in the metal phase of BaPb{sub 1-x}Sb{sub x}O{sub 3} oxides are carried out for the first time. The constants of indirect heteronuclear spin-spin {sup 17}O-{sup 207}Pb interaction are determined as functions of the local Knight shift {sub 207}Ks. The estimates of the constants of the indirect interaction between the nuclei of the nearest neighbors (O-Pb and Pb-Pb atoms) and analysis of evolution of the NMR spectra of {sup 17}O upon a change in the antimony concentration are convincing evidence in favor of the development of a microscopically inhomogeneous state of the electron system in the metal phase of BaPb{sub 1-x}Sb{sub x}O{sub 3} oxides.

  1. Superconductivity in Layered Organic Metals

    Directory of Open Access Journals (Sweden)

    Jochen Wosnitza

    2012-04-01

    Full Text Available In this short review, I will give an overview on the current understanding of the superconductivity in quasi-two-dimensional organic metals. Thereby, I will focus on charge-transfer salts based on bis(ethylenedithiotetrathiafulvalene (BEDT-TTF or ET for short. In these materials, strong electronic correlations are clearly evident, resulting in unique phase diagrams. The layered crystallographic structure leads to highly anisotropic electronic as well as superconducting properties. The corresponding very high orbital critical field for in-plane magnetic-field alignment allows for the occurrence of the Fulde–Ferrell– Larkin–Ovchinnikov state as evidenced by thermodynamic measurements. The experimental picture on the nature of the superconducting state is still controversial with evidence both for unconventional as well as for BCS-like superconductivity.

  2. Experimental Investigation of Magnetic, Superconducting, and other Phase Transitions in novel F-Electron Materials at Ultra-high Pressures - Final Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Maple, Brian; Jeffires, Jason

    2006-07-28

    This grant, entitled “Experimental investigation of magnetic, superconducting and other phase transitions in novel f-electron materials at ultrahigh pressures,” spanned the funding period from May 1st, 2003 until April 30th, 2006. The major goal of this grant was to develop and utilize an ultrahigh pressure facility—capable of achieving very low temperatures, high magnetic fields, and extreme pressures as well as providing electrical resistivity, ac susceptibility, and magnetization measurement capabilities under pressure—for the exploration of magnetic, electronic, and structural phases and any corresponding interactions between these states in novel f-electron materials. Realizing this goal required the acquisition, development, fabrication, and implementation of essential equipment, apparatuses, and techniques. The following sections of this report detail the establishment of an ultrahigh pressure facility (Section 1) and measurements performed during the funding period (Section 2), as well as summarize the research project (Section 3), project participants and their levels of support (Section 4), and publications and presentations (Section 5).

  3. 2012 ELECTRONIC SPECTROSCOPY & DYNAMICS GORDON RESEARCH CONFERENCE, JULY 22-27, 2012

    Energy Technology Data Exchange (ETDEWEB)

    Kohler, Bern

    2012-07-27

    Topics covered in this GRC include high-resolution spectroscopy, coherent electronic energy transport in biology, excited state theory and dynamics, excitonics, electronic spectroscopy of cold and ultracold molecules, and the spectroscopy of nanostructures. Several sessions will highlight innovative techniques such as time-resolved x-ray spectroscopy, frequency combs, and liquid microjet photoelectron spectroscopy that have forged stimulating new connections between gas-phase and condensed-phase work.

  4. Hot-electron dynamics and thermalization in small metallic nanoparticles (Conference Presentation)

    Science.gov (United States)

    Garcia de Abajo, Javier F.

    2016-09-01

    Recent experimental and theoretical advances in the study of graphene plasmons have triggered the search for similar phenomena in other materials that are structured down to the atomic scale, and in particular, alternative 2D crystals, noble-metal monolayers, and polycyclic aromatic hydrocarbons, which can be regarded as molecular versions of graphene. The number of valence electrons that are engaged in the plasmon excitations of these materials is small compared with those of conventional 3D metallic nanostructures, and consequently, the addition or removal of a comparatively small number of electrons produces sizeable changes in their frequencies and near-field distributions. Graphene in particular has been shown to exhibit a large degree of electrical modulation due to its peculiar electronic band structure, which is characterized by a linear dispersion relation and vanishing of the electron density of states at the Fermi level; few electrons are needed to considerably change the Fermi energy. However, plasmons in graphene have only been observed at mid-infrared and lower frequencies, and therefore, small molecular structures and atomically thin metals constitute attractive alternatives to achieve fast electro-optical modulation in the visible and near-infrared (vis-NIR) parts of the spectrum. In this presentation, we review different strategies and recent advances in the achievement of strong optical tunability in the vis-NIR using plasmons of atomic-scale materials, as well as their potential application for quantum optics, light manipulation, and sensing.

  5. Electrons in strong electromagnetic fields: spin effects and radiation reaction (Conference Presentation)

    Science.gov (United States)

    Bauke, Heiko; Wen, Meng; Keitel, Christoph H.

    2017-05-01

    Various different classical models of electrons including their spin degree of freedom are commonly applied to describe the coupled dynamics of relativistic electron motion and spin precession in strong electromagnetic fields. The spin dynamics is usually governed by the Thomas-Bargmann-Michel-Telegdi equation [1, 2] in these models, while the electron's orbital motion follows the (modified) Lorentz force and a spin-dependent Stern-Gerlach force. Various classical models can lead to different or even contradicting predictions how the spin degree of freedom modifies the electron's orbital motion when the electron moves in strong electromagnetic fields. This discrepancy is rooted in the model-specific energy dependency of the spin induced relativistic Stern-Gerlach force acting on the electron. The Frenkel model [3, 4] and the classical Foldy-Wouthuysen model 5 are compared exemplarily against each other and against the quantum mechanical Dirac equation in order to identify parameter regimes where these classical models make different predictions [6, 7]. Our theoretical results allow for experimental tests of these models. In the setup of the longitudinal Stern-Gerlach effect, the Frenkel model and classical Foldy-Wouthuysen model lead in the relativistic limit to qualitatively different spin effects on the electron trajectory. Furthermore, it is demonstrated that in tightly focused beams in the near infrared the effect of the Stern-Gerlach force of the Frenkel model becomes sufficiently large to be potentially detectable in an experiment. Among the classical spin models, the Frenkel model is certainly prominent for its long history and its wide application. Our results, however, suggest that the classical Foldy-Wouthuysen model is superior as it is qualitatively in better agreement with the quantum mechanical Dirac equation. In ultra strong laser setups at parameter regimes where effects of the Stern-Gerlach force become relevant also radiation reaction effects are

  6. Activities on RF superconductivity at DESY

    Energy Technology Data Exchange (ETDEWEB)

    Matheisen, A. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); TESLA Collaboration

    1996-01-01

    At DESY the HERA electron storage ring is supplied with normal and superconducting cavities. The superconducting system transfers up to 1 MW klystron power to the beam. Experiences are reported on luminosity and machine study runs. Since 1993 one major activity in the field of RF superconducting cavities is the installation of the TESLA Test Facility. Set-up of hardware and first tests of s.c. resonators are presented. (R.P.). 11 refs.

  7. Nonequilibrium superconducting detectors

    Science.gov (United States)

    Cristiano, R.; Ejrnaes, M.; Esposito, E.; Lisitskyi, M. P.; Nappi, C.; Pagano, S.; Perez de Lara, D.

    2006-03-01

    Nonequilibrium superconducting detectors exploit the early stages of the energy down cascade which occur after the absorption of radiation. They operate on a short temporal scale ranging from few microseconds down to tens of picoseconds. In such a way they provide fast counting capability, high time discrimination and also, for some devices, energy sensitivity. Nonequilibrium superconducting detectors are developed for their use both in basic science and in practical applications for detection of single photons or single ionized macromolecules. In this paper we consider two devices: distributed readout imaging detectors (DROIDs) based on superconducting tunnel junctions (STJs), which are typically used for high-speed energy spectroscopy applications, and hot-electron superconductive detectors (HESDs), which are typically used as fast counters and time discriminators. Implementation of the DROID geometry to use a single superconductor is discussed. Progress in the fabrication technology of NbN nanostructured HESDs is presented. The two detectors share the high sensitivity that makes them able to efficiently detect even single photons down to infrared energy.

  8. Nonequilibrium superconducting detectors

    Energy Technology Data Exchange (ETDEWEB)

    Cristiano, R [CNR-Istituto di Cibernetica E. Caianiello, 80078 Pozzuoli (Namibia) (Italy); Ejrnaes, M [CNR-Istituto di Cibernetica E. Caianiello, 80078 Pozzuoli (Namibia) (Italy); INFN Sezione di Napoli, 80126 Naples (Italy); Esposito, E [CNR-Istituto di Cibernetica E. Caianiello, 80078 Pozzuoli (Namibia) (Italy); Lisitskyi, M P [CNR-Istituto di Cibernetica E. Caianiello, 80078 Pozzuoli (Namibia) (Italy); Nappi, C [CNR-Istituto di Cibernetica E. Caianiello, 80078 Pozzuoli (Namibia) (Italy); Pagano, S [CNR-Istituto di Cibernetica E. Caianiello, 80078 Pozzuoli (Namibia) (Italy); Dipartimento di Fisica, Universita di Salerno, 84081 Baronissi (Saudi Arabia) (Italy); Perez de Lara, D [CNR-Istituto di Cibernetica E. Caianiello, 80078 Pozzuoli (Namibia) (Italy)

    2006-03-15

    Nonequilibrium superconducting detectors exploit the early stages of the energy down cascade which occur after the absorption of radiation. They operate on a short temporal scale ranging from few microseconds down to tens of picoseconds. In such a way they provide fast counting capability, high time discrimination and also, for some devices, energy sensitivity. Nonequilibrium superconducting detectors are developed for their use both in basic science and in practical applications for detection of single photons or single ionized macromolecules. In this paper we consider two devices: distributed readout imaging detectors (DROIDs) based on superconducting tunnel junctions (STJs), which are typically used for high-speed energy spectroscopy applications, and hot-electron superconductive detectors (HESDs), which are typically used as fast counters and time discriminators. Implementation of the DROID geometry to use a single superconductor is discussed. Progress in the fabrication technology of NbN nanostructured HESDs is presented. The two detectors share the high sensitivity that makes them able to efficiently detect even single photons down to infrared energy.

  9. High temperature interface superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Gozar, A., E-mail: adrian.gozar@yale.edu [Yale University, New Haven, CT 06511 (United States); Bozovic, I. [Yale University, New Haven, CT 06511 (United States); Brookhaven National Laboratory, Upton, NY 11973 (United States)

    2016-02-15

    Highlight: • This review article covers the topic of high temperature interface superconductivity. • New materials and techniques used for achieving interface superconductivity are discussed. • We emphasize the role played by the differences in structure and electronic properties at the interface with respect to the bulk of the constituents. - Abstract: High-T{sub c} superconductivity at interfaces has a history of more than a couple of decades. In this review we focus our attention on copper-oxide based heterostructures and multi-layers. We first discuss the technique, atomic layer-by-layer molecular beam epitaxy (ALL-MBE) engineering, that enabled High-T{sub c} Interface Superconductivity (HT-IS), and the challenges associated with the realization of high quality interfaces. Then we turn our attention to the experiments which shed light on the structure and properties of interfacial layers, allowing comparison to those of single-phase films and bulk crystals. Both ‘passive’ hetero-structures as well as surface-induced effects by external gating are discussed. We conclude by comparing HT-IS in cuprates and in other classes of materials, especially Fe-based superconductors, and by examining the grand challenges currently laying ahead for the field.

  10. Comprehensive studies for the crystal structures and electronic properties of the superconducting system Fe1 + δSe1 - xTex with \\delta \\simeq 0.037 and x \\simeq 0.55

    Science.gov (United States)

    Onoda, Masashige; Kawasaki, Yasuna; Tsubokawa, Masashi; Koyano, Tamotsu

    2010-12-01

    Structural aspects and electronic properties for the Fe1 + δSe1 - xTex system with 0.04 125Te. The crystal structures with an excess Fe site are refined precisely with obvious constraints. For the superconducting composition, the transport properties are explained in terms of the two-band model, where an electron carrier band gives a linear-in-T resistivity and another hole band leads to nearly temperature-independent behaviour. The magnetic susceptibility and the Knight shift are explained with the idea that the electron correlation is enhanced with increasing x and it is reduced with annealing. The spin-lattice relaxation rates for the normal state that show the apparent Korringa relation may also be understood in this framework. These evidences suggest that the superconductivity may emerge in a regime where the correlation is relatively weak in this system.

  11. The Gaseous Electronics Conference in its seventh decade: some new problems in an old field

    Science.gov (United States)

    Gay, Timothy

    2015-09-01

    Our understanding of scattering processes involving atoms and molecules is the foundation of the science of gaseous electronics. As fields of physics and chemistry, both atomic and molecular collisions and gaseous electronics originated in the early 20th century, and they have developed symbiotically and in parallel since then. Despite a century of progress since the Franck-Hertz experiment however, it is fair to say that the field of atomic and molecular collisions is old and well-explored, but not mature. While the electron-atomic hydrogen problem has been solved in complete detail, there are large regions in the ``great outback'' of the periodic table where either theory or experiment (or both) are nonexistent, or there is little correlation between the two. The problem becomes dramatically worse with molecules, including those with just one atom too many. As applications of gaseous electronics have become both more sophisticated and more complicated, the demands for basic, accurate cross section data, especially for heavy, polyatomic molecular constituents, have escalated accordingly. This talk will review the status of our theoretical understanding of atomic and molecular collisions, and will present several case studies involving targets of He, H2, Zn, H2O, and C10H15IO to illustrate current problems in the field. We will also consider crucial needs for basic collisional data in recent applied plasma science problems. Work supported by the NSF through Grant PHY-1505794.

  12. Imaging polyatomic molecules with ultrafast laser-induced electron diffraction (Conference Presentation)

    Science.gov (United States)

    Le, Anh-Thu; Lin, Chii-Dong

    2016-10-01

    Molecular structure determination of chemical reactions or processes has been one of the grand challenges in physics, chemistry, and biology. To image these processes, it typically requires sub-Angstrom spatial and femtosecond temporal resolutions. One of the standard imaging techniques, X-ray diffraction, however, currently suffers from temporal jitters and is available only at large facilities. Furthermore, it also suffers from very low elastic scattering cross sections, which make it difficult to apply to gas phase molecules. Another technique, ultrafast electron diffraction (UED), overcomes this low cross section problem, but the temporal resolution is still limited to hundreds of femtoseconds, mainly due to Coulomb repulsion in electron beam and velocity mismatch between laser-pump pulse and electron probe pulse in a typical pump-probe scheme. The recently proposed laser-induced electron diffraction (LIED) is based on two basic ideas. First, an electron wave packet can be generated from a target itself by an intense laser pulse and driven back within the subsequent half-cycle of the laser to rescatter from the parent ion, thus realizing a self-imaging process. Laser-free elastic differential cross sections (DCS) can then be extracted from high-energy electron spectra, as demonstrated by the Quantitative Rescattering theory (QRS). Second, the target structure information can be retrieved from the DCS. This retrieval is further simplified by using back-scattered electrons with collision energy of about 100 eV, for which the independent-atom model (IAM) can be employed to quite accurately simulate the DCS. Demonstration of ultrafast imaging with the LIED has been reported so far on simple diatomic molecules. Here we discuss recent progress in LIED with polyatomic molecules in two examples. The first one is aligned acetylene (C2H2) and the second one is benzene (C6H6). In both cases, two bond lengths, C-C and C-H have been successfully retrieved. For even more

  13. Nanostructural features degrading the performance of superconducting radio frequency niobium cavities revealed by transmission electron microscopy and electron energy loss spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Trenikhina, Y., E-mail: yuliatr@fnal.gov [Physics Department, Illinois Institute of Technology, Chicago, Illinois 60616 (United States); Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States); Romanenko, A., E-mail: aroman@fnal.gov [Fermi National Accelerator Laboratory, Batavia, Illinois 60510 (United States); Kwon, J.; Zuo, J.-M. [Materials Science and Engineering Department, University of Illinois, Urbana, Illinois 61801 (United States); Zasadzinski, J. F. [Physics Department, Illinois Institute of Technology, Chicago, Illinois 60616 (United States)

    2015-04-21

    Nanoscale defect structure within the magnetic penetration depth of ∼100 nm is key to the performance limitations of niobium superconducting radio frequency cavities. Using a unique combination of advanced thermometry during cavity RF measurements, and TEM structural and compositional characterization of the samples extracted from cavity walls, we discover the existence of nanoscale hydrides in electropolished cavities limited by the high field Q slope, and show the decreased hydride formation in the electropolished cavity after 120 °C baking. Furthermore, we demonstrate that adding 800 °C hydrogen degassing followed by light buffered chemical polishing restores the hydride formation to the pre-120 °C bake level. We also show absence of niobium oxides along the grain boundaries and the modifications of the surface oxide upon 120 °C bake.

  14. Effect of Electron Irradiation on Superconductivity in Single Crystals of Ba(Fe_{1−x}Ru_{x}_{2}As_{2} (x=0.24

    Directory of Open Access Journals (Sweden)

    R. Prozorov

    2014-11-01

    Full Text Available A single crystal of isovalently substituted Ba(Fe_{1−x}Ru_{x}_{2}As_{2} (x=0.24 is sequentially irradiated with 2.5 MeV electrons up to a maximum dose of 2.1×10^{19} e^{−}/cm^{2}. The electrical resistivity is measured in situ at T=22  K during the irradiation and ex situ as a function of temperature between subsequent irradiation runs. Upon irradiation, the superconducting transition temperature T_{c} decreases and the residual resistivity ρ_{0} increases. We find that electron irradiation leads to the fastest suppression of T_{c} compared to other types of artificially introduced disorder, probably due to the strong short-range potential of the pointlike irradiation defects. A more detailed analysis within a multiband scenario with variable scattering potential strength shows that the observed T_{c} versus ρ_{0} is fully compatible with s_{±} pairing, in contrast to earlier claims that this model leads to a too rapid suppression of T_{c} with scattering.

  15. Recent advances in fullerene superconductivity

    CERN Document Server

    Margadonna, S

    2002-01-01

    Superconducting transition temperatures in bulk chemically intercalated fulleride salts reach 33 K at ambient pressure and in hole-doped C sub 6 sub 0 derivatives in field-effect-transistor (FET) configurations, they reach 117 K. These advances pose important challenges for our understanding of high-temperature superconductivity in these highly correlated organic metals. Here we review the structures and properties of intercalated fullerides, paying particular attention to the correlation between superconductivity and interfullerene separation, orientational order/disorder, valence state, orbital degeneracy, low-symmetry distortions, and metal-C sub 6 sub 0 interactions. The metal-insulator transition at large interfullerene separations is discussed in detail. An overview is also given of the exploding field of gate-induced superconductivity of fullerenes in FET electronic devices.

  16. Annual Gaseous Electronics Conference (41st) Held in Minneapolis, Minnesota on 18-21 October 1988

    Science.gov (United States)

    1989-09-01

    Alston, G. Snitchler and D. Norcross 1-31. STUDIES OF LOW-ENERGY ELECTRON SCATTERING BY MOLECULES H. Pritchard, C. Winstead, K. Watari , V. McKoy, M...Winstead, H. Pritchard, K. Watari , V. McKoy, M. A. P. Lima, F. J. daPaixao and L. M. Brescansin (Long Paper) 9:45 - 10:10 PB-2. ELECTRON-IMPACT DISSOCIATION...1-1 Wang, M. C. N-4 Stanton, A. C. E-13 Wang, S. H-30 Stearns, J.W. LA-1 Wang, Y. E-28 Stein, T. S. 1-24, 1-25 Watari , K. 1-31, PB-I Stephen, T. M. CB

  17. Gaseous Electronics Conference (33rd) Held at Norman, Oklahoma, 7-10 October 1980.

    Science.gov (United States)

    1980-10-01

    CO 2 by Electron Impact - DEVARAJAN THIRUMALAI, KUNIZO ONDA , and DONALD G. TRUHLAR, Univ. of Minnesota.*--Differential, integral, and momentum...Cathodes with oxidised s!urfaces have a much lower fluctuation amplitude than non-oxidised surfaces, cathode shape is found to significantly influence...the fluctuation amplitude . A certain conical cathode has been found to be significant- ly qliet . Correlations have been observed in the fluc- tuaft

  18. Hybrid nanowire ion-to-electron transducers for integrated bioelectronic circuitry (Conference Presentation)

    Science.gov (United States)

    Carrad, Damon J.; Mostert, Bernard; Meredith, Paul; Micolich, Adam P.

    2016-09-01

    A key task in bioelectronics is the transduction between ionic/protonic signals and electronic signals at high fidelity. This is a considerable challenge since the two carrier types exhibit intrinsically different physics. We present our work on a new class of organic-inorganic transducing interface utilising semiconducting InAs and GaAs nanowires directly gated with a proton transporting hygroscopic polymer consisting of undoped polyethylene oxide (PEO) patterned to nanoscale dimensions by a newly developed electron-beam lithography process [1]. Remarkably, we find our undoped PEO polymer electrolyte gate dielectric [2] gives equivalent electrical performance to the more traditionally used LiClO4-doped PEO [3], with an ionic conductivity three orders of magnitude higher than previously reported for undoped PEO [4]. The observed behaviour is consistent with proton conduction in PEO. We attribute our undoped PEO-based devices' performance to the small external surface and high surface-to-volume ratio of both the nanowire conducting channel and patterned PEO dielectric in our devices, as well as the enhanced hydration afforded by device processing and atmospheric conditions. In addition to studying the basic transducing mechanisms, we also demonstrate high-fidelity ionic to electronic conversion of a.c. signals at frequencies up to 50 Hz. Moreover, by combining complementary n- and p-type transducers we demonstrate functional hybrid ionic-electronic circuits can achieve logic (NOT operation), and with some further engineering of the nanowire contacts, potentially also amplification. Our device structures have significant potential to be scaled towards realising integrated bioelectronic circuitry. [1] D.J. Carrad et al., Nano Letters 14, 94 (2014). [2] D.J. Carrad et al., Manuscript in preparation (2016). [3] S.H. Kim et al., Advanced Materials 25, 1822 (2013). [4] S.K. Fullerton-Shirey et al., Macromolecules 42, 2142 (2009).

  19. Superconducting Microelectronics.

    Science.gov (United States)

    Henry, Richard W.

    1984-01-01

    Discusses superconducting microelectronics based on the Josephson effect and its advantages over conventional integrated circuits in speed and sensitivity. Considers present uses in standards laboratories (voltage) and in measuring weak magnetic fields. Also considers future applications in superfast computer circuitry using Superconducting…

  20. 4. MESOSCOPIC SUPERCONDUCTIVITY: Proximity Action theory of superconductive nanostructures

    Science.gov (United States)

    Skvortsov, M. A.; Larkin, A. I.; Feigel'man, M. V.

    2001-10-01

    We review a novel approach to the superconductive proximity effect in disordered normal-superconducting (N-S) structures. The method is based on the multicharge Keldysh action and is suitable for the treatment of interaction and fluctuation effects. As an application of the formalism, we study the subgap conductance and noise in two-dimensional N-S systems in the presence of the electron-electron interaction in the Cooper channel. It is shown that singular nature of the interaction correction at large scales leads to a nonmonotonuos temperature, voltage and magnetic field dependence of the Andreev conductance.

  1. Electron paramagnetic resonance of radicals and metal complexes. 2. international conference of the Polish EPR Association. Warsaw 9-13 September 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The conference of Electron Paramagnetic Resonance of Radicals and Metal Complexes has been held in Warsaw from 9 to 13 September 1996. It was the Second International Conference of the Polish EPR Association. The very extensive group of systems containing paramagnetic species has been studied by means of ESR or other magnetic techniques like ENDOR, Spin Echo etc. By radiation or photochemically generated radicals have been stabilized in low temperatures or being detected by means of very fast pulsed techniques. The chemical reactions, reaction kinetics of radicals as well as spin interaction with matrices have been studied and discussed. Over 100 lectures and posters have been presented.

  2. Possible role of bonding angle and orbital mixing in iron pnictide superconductivity: Comparative electronic structure studies of LiFeAs and Sr2VO3FeAs

    Science.gov (United States)

    Kim, Y. K.; Koh, Y. Y.; Kyung, W. S.; Han, G. R.; Lee, B.; Kim, Kee Hoon; Ok, J. M.; Kim, Jun Sung; Arita, M.; Shimada, K.; Namatame, H.; Taniguchi, M.; Mo, S.-K.; Kim, C.

    2015-07-01

    A well-known universal feature among iron pnictide superconductors is the correlation between the As-Fe-As bonding angle and the superconducting transition temperature. However, the origin of such a correlation has not been clearly understood despite its potential importance in understanding the mechanism of superconductivity. Here, we present comparative electronic structure studies of LiFeAs and Sr2VO3FeAs , two representative systems without any dopant that can show bonding angle dependence of the electronic structure. Captured distinct features of the higher Tc compound Sr2VO3FeAs such as an unusual kz modulation and anomalous polarization dependence suggest that the difference between the two systems is in the interorbital coupling strength. This could be the essential element of the bonding angle dependence that allows an enhanced pairing instability and Tc.

  3. Superconductivity Emerging from an Electronic Phase Separation in the Charge Ordered Phase of RbFe2As2

    Science.gov (United States)

    Civardi, E.; Moroni, M.; Babij, M.; Bukowski, Z.; Carretta, P.

    2016-11-01

    75As, 87Rb, and 85Rb nuclear quadrupole resonance (NQR) and 87Rb nuclear magnetic resonance measurements in a RbFe2As2 iron-based superconductor are presented. We observe a marked broadening of the 75As NQR spectrum below T0≃140 K which is associated with the onset of a charge order in the FeAs planes. Below T0 we observe a power-law decrease in the 75As nuclear spin-lattice relaxation rate down to T*≃20 K . Below T* the nuclei start to probe different dynamics owing to the different local electronic configurations induced by the charge order. A fraction of the nuclei probes spin dynamics associated with electrons approaching a localization while another fraction probes activated dynamics possibly associated with a pseudogap. These different trends are discussed in light of an orbital selective behavior expected for the electronic correlations.

  4. The effects of interstitial oxygen on superconducting electronic phases in strontium and oxygen co-doped La1.937Sr0.063CuO4+δ

    Institute of Scientific and Technical Information of China (English)

    Shen Cai-xia; Shen Xiao-Li; Lu Wei; Dong Xiao-Li; Li Zheng-Cai; Xiong Ji-Wu; Zhou Fang

    2008-01-01

    Strontium and oxygen co-doped La1.937Sr0.063CuO4+δ superconductor with Tc≈40K, which is obtained by oxidizing strontium-doped starting ceramic sample La1.937Sr0.063CuO4 in NaClO solution, is annealed under different conditions to allow interstitial oxygen to redistribute. The evolution of the intrinsic superconducting property with the oxygen redistribution is studied in detail by magnetic measurements in various fields. It is found that there occurs the electronic phase separation from the single superconducting phase with Tc≈40K into two coexisting superconducting states with values of Tc: 15 and 40K or of 15 and 35K in this system, depending on annealing condition. Our results indicate that the 15, 35 and 40K superconducting phases associated with the excess oxygen redistribution are all thermodynamically meta-stable intrinsic states in this Sr/O co-doped cuprate.

  5. Color superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Wilczek, F. [Institute for Advanced Study, Princeton, NJ (United States)

    1997-09-22

    The asymptotic freedom of QCD suggests that at high density - where one forms a Fermi surface at very high momenta - weak coupling methods apply. These methods suggest that chiral symmetry is restored and that an instability toward color triplet condensation (color superconductivity) sets in. Here I attempt, using variational methods, to estimate these effects more precisely. Highlights include demonstration of a negative pressure in the uniform density chiral broken phase for any non-zero condensation, which we take as evidence for the philosophy of the MIT bag model; and demonstration that the color gap is substantial - several tens of MeV - even at modest densities. Since the superconductivity is in a pseudoscalar channel, parity is spontaneously broken.

  6. Studies of extraction and transport system for highly charged ion beam of 18 GHz superconducting electron cyclotron resonance ion source at Research Center for Nuclear Physics.

    Science.gov (United States)

    Yorita, T; Hatanaka, K; Fukuda, M; Ueda, H; Yasuda, Y; Morinobu, S; Tamii, A; Kamakura, K

    2014-02-01

    An 18 GHz superconducting electron cyclotron resonance ion source is installed to increase beam currents and to extend the variety of ions especially for highly charged heavy ions which can be accelerated by cyclotrons of Research Center for Nuclear Physics (RCNP), Osaka University. The beam production developments of several ions from B to Xe have been already done [T. Yorita, K. Hatanaka, M. Fukuda, M. Kibayashi, S. Morinobu, H.Okamura, and A. Tamii, Rev. Sci. Instrum. 79, 02A311 (2008) and T. Yorita, K. Hatanaka, M. Fukuda, M. Kibayashi, S. Morinobu, H.Okamura, and A. Tamii, Rev. Sci. Instrum. 81, 02A332 (2010)] and the further studies for those beam extraction and its transport have been done in order to increase the beam current more. The plasma electrode, extraction electrode, and einzel lens are modified. Especially extraction electrode can be applied minus voltage for the beam extraction and it works well to improve the extracted beam current. The extraction voltage dependences of transmission and emittance also have been studied for beam current improvement which is injected into azimuthally varying field cyclotron at RCNP.

  7. Upper critical field, pressure-dependent superconductivity and electronic anisotropy of Sm4Fe2As2Te(1-x)O(4-y)F(y).

    Science.gov (United States)

    Pisoni, A; Katrych, S; Szirmai, P; Náfrádi, B; Gaál, R; Karpinski, J; Forró, L

    2016-03-23

    We present a detailed study of the electrical transport properties of a recently discovered iron-based superconductor: Sm4Fe2As2Te0.72O2.8F1.2. We followed the temperature dependence of the upper critical field by resistivity measurement of single crystals in magnetic fields up to 16 T, oriented along the two main crystallographic directions. This material exhibits a zero-temperature upper critical field of 90 T and 65 T parallel and perpendicular to the Fe2As2 planes, respectively. An unprecedented superconducting magnetic anisotropy γH=H(c2)(ab)/H(c2)(c) ~ 14 is observed near Tc, and it decreases at lower temperatures as expected in multiband superconductors. Direct measurement of the electronic anisotropy was performed on microfabricated samples, showing a value of ρ(c)/ρ(ab)(300K) ~ 5 that rises up to 19 near Tc . Finally, we have studied the pressure and temperature dependence of the in-plane resistivity. The critical temperature decreases linearly upon application of hydrostatic pressure (up to 2 GPa) similarly to overdoped cuprate superconductors. The resistivity shows saturation at high temperatures, suggesting that the material approaches the Mott-Ioffe-Regel limit for metallic conduction. Indeed, we have successfully modelled the resistivity in the normal state with a parallel resistor model that is widely accepted for this state. All the measured quantities suggest strong pressure dependence of the density of states.

  8. Studies of extraction and transport system for highly charged ion beam of 18 GHz superconducting electron cyclotron resonance ion source at Research Center for Nuclear Physics

    Science.gov (United States)

    Yorita, T.; Hatanaka, K.; Fukuda, M.; Ueda, H.; Yasuda, Y.; Morinobu, S.; Tamii, A.; Kamakura, K.

    2014-02-01

    An 18 GHz superconducting electron cyclotron resonance ion source is installed to increase beam currents and to extend the variety of ions especially for highly charged heavy ions which can be accelerated by cyclotrons of Research Center for Nuclear Physics (RCNP), Osaka University. The beam production developments of several ions from B to Xe have been already done [T. Yorita, K. Hatanaka, M. Fukuda, M. Kibayashi, S. Morinobu, H.Okamura, and A. Tamii, Rev. Sci. Instrum. 79, 02A311 (2008) and T. Yorita, K. Hatanaka, M. Fukuda, M. Kibayashi, S. Morinobu, H.Okamura, and A. Tamii, Rev. Sci. Instrum. 81, 02A332 (2010)] and the further studies for those beam extraction and its transport have been done in order to increase the beam current more. The plasma electrode, extraction electrode, and einzel lens are modified. Especially extraction electrode can be applied minus voltage for the beam extraction and it works well to improve the extracted beam current. The extraction voltage dependences of transmission and emittance also have been studied for beam current improvement which is injected into azimuthally varying field cyclotron at RCNP.

  9. Studies of extraction and transport system for highly charged ion beam of 18 GHz superconducting electron cyclotron resonance ion source at Research Center for Nuclear Physics

    Energy Technology Data Exchange (ETDEWEB)

    Yorita, T., E-mail: yorita@rcnp.osaka-u.ac.jp; Hatanaka, K.; Fukuda, M.; Ueda, H.; Yasuda, Y.; Morinobu, S.; Tamii, A.; Kamakura, K. [Research Center for Nuclear Physics (RCNP), Osaka University, Osaka 567-0047 (Japan)

    2014-02-15

    An 18 GHz superconducting electron cyclotron resonance ion source is installed to increase beam currents and to extend the variety of ions especially for highly charged heavy ions which can be accelerated by cyclotrons of Research Center for Nuclear Physics (RCNP), Osaka University. The beam production developments of several ions from B to Xe have been already done [T. Yorita, K. Hatanaka, M. Fukuda, M. Kibayashi, S. Morinobu, H.Okamura, and A. Tamii, Rev. Sci. Instrum. 79, 02A311 (2008) and T. Yorita, K. Hatanaka, M. Fukuda, M. Kibayashi, S. Morinobu, H.Okamura, and A. Tamii, Rev. Sci. Instrum. 81, 02A332 (2010)] and the further studies for those beam extraction and its transport have been done in order to increase the beam current more. The plasma electrode, extraction electrode, and einzel lens are modified. Especially extraction electrode can be applied minus voltage for the beam extraction and it works well to improve the extracted beam current. The extraction voltage dependences of transmission and emittance also have been studied for beam current improvement which is injected into azimuthally varying field cyclotron at RCNP.

  10. SUPERCONDUCTING PHOTOCATHODES.

    Energy Technology Data Exchange (ETDEWEB)

    SMEDLEY, J.; RAO, T.; WARREN, J.; SEKUTOWICZ, LANGNER, J.; STRZYZEWSKI, P.; LEFFERS, R.; LIPSKI, A.

    2005-10-09

    We present the results of our investigation of lead and niobium as suitable photocathode materials for superconducting RF injectors. Quantum efficiencies (QE) have been measured for a range of incident photon energies and a variety of cathode preparation methods, including various lead plating techniques on a niobium substrate. The effects of operating at ambient and cryogenic temperatures and different vacuum levels on the cathode QE have also been studied.

  11. Nanoscale chromatin structure characterization for optical applications: a transmission electron microscopy study (Conference Presentation)

    Science.gov (United States)

    Li, Yue; Cherkezyan, Lusik; Zhang, Di; Almassalha, Luay; Roth, Eric; Chandler, John; Bleher, Reiner; Subramanian, Hariharan; Dravid, Vinayak P.; Backman, Vadim

    2017-02-01

    Structural and biological origins of light scattering in cells and tissue are still poorly understood. We demonstrate how this problem might be addressed through the use of transmission electron microscopy (TEM). For biological samples, TEM image intensity is proportional to mass-density, and thus proportional to refractive index (RI). By calculating the autocorrelation function (ACF) of TEM image intensity of a thin-section of cells, we essentially maintain the nanoscale ACF of the 3D cellular RI distribution, given that the RI distribution is statistically isotropic. Using this nanoscale 3D RI ACF, we can simulate light scattering through biological samples, and thus guiding many optical techniques to quantify specific structures. In this work, we chose to use Partial Wave Spectroscopy (PWS) microscopy as a one of the nanoscale-sensitive optical techniques. Hela cells were prepared using standard protocol to preserve nanoscale ultrastructure, and a 50-nm slice was sectioned for TEM imaging at 6 nm resolution. The ACF was calculated for chromatin, and the PWS mean sigma was calculated by summing over the power spectral density in the visible light frequency of a random medium generated to match the ACF. A 1-µm slice adjacent to the 50-nm slice was sectioned for PWS measurement to guarantee identical chromatin structure. For 33 cells, we compared the calculated PWS mean sigma from TEM and the value measured directly, and obtained a strong correlation of 0.69. This example indicates the great potential of using TEM measured RI distribution to better understand the quantification of cellular nanostructure by optical methods.

  12. Superconductivity and crystal and electronic structures in hydrogenated and disordered Nb3Ge and Nb3Sn layers with A15 structure

    Science.gov (United States)

    Nölscher, C.; Saemann-Ischenko, G.

    1985-08-01

    Superconducting and transport properties of Nb3Ge and Nb3Sn layers have been varied over a wide range by hydrogenation, ion irradiation, and annealing. After hydrogenation, both compounds remain in the A15 structure and no effects of hydride precipitations at low temperatures could be observed. At high ion-irradiation doses Nb3Ge becomes amorphous, but Nb3Sn remains in the A15 structure, although Tc behaves similarly. The long-range order parameter SA and the mean displacement amplitude u2>1/2 were determined for Nb3Sn with x-ray diffraction. Distinct differences between the irradiation- and annealing-induced correlations of Tc versus Sa, Tc versus u2>, and Tc versus lattice parameter were observed. This indicates the influence of topological short-range order. The correlations of Tc versus residual resistivity and Tc versus the temperature derivative of the upper critical field at Tc are distinctly different for hydrogenated and irradiated Nb3Sn and Nb3Ge, but the derived correlations of Tc versus the coefficient of the electronic specific heat are very similar. The results are interpreted by a dominant influence of the Γ12 band on high Tc. The measurements of the Hall constant RH indicate a filling of steep electronic bands as a result of hydrogenation. Irradiation has a similar influence as thermal-induced disorder on RH. A maximum in the temperature dependence of RH indicates a martensitic transformation of Nb3Sn at 50-55 K, which is unchanged in slightly hydrogenated samples with higher Tc but vanishes in irradiated samples.

  13. CONDENSED MATTER: ELECTRONIC STRUCTURE, ELECTRICAL, MAGNETIC, AND OPTICAL PROPERTIES: Hofstadter's Butterfly and Phase Transition of Checkerboard Superconducting Network in a Magnetic Field

    Science.gov (United States)

    Hou, Jing-Min; Tian, Li-Jim

    2010-03-01

    We study the magnetic effect of the checkerboard superconducting wire network. Based on the de Gennes-Alexader theory, we obtain difference equations for superconducting order parameter in the wire network. Through solving these difference equations, we obtain the eigenvalues, linked to the coherence length, as a function of magnetic field. The diagram of eigenvalues shows a fractal structure, being so-called Hofstadter's butterfly. We also calculate and discuss the dependence of the transition temperature of the checkerboard superconducting wire network on the applied magnetic field, which is related to up-edge of the Hofstadter's butterfly spectrum.

  14. Superconducting Tunnel Junction Refrigerators for Sub-Kelvin Cooling of Electrons, Phonons, and Arbitrary, User-Supplied Payloads

    Science.gov (United States)

    Lowell, Peter Joseph

    Modern science often requires measurements at sub-Kelvin temperatures. Temperatures of 300 mK can be reached by using liquid 3He, but reaching lower temperatures requires the use of adiabatic demagnetization and dilution refrigerators which are complex, large, and costly. Normal-metalInsulatorSuperconductor (NIS) tunnel junctions provide an alternative refrigeration method that is simple to use, compact, and provides continuous cooling power that has the potential to expand the accessibility of these sub-Kelvin temperatures. When properly biased, the electron system in the normal metal of an NIS junction is cooled since the hottest electrons preferentially tunnel from the normal metal to the superconductor, transferring heat in the process. When the normal metal is extended onto a thermally isolated membrane, the cold electrons cool the phonons in the membrane through electron-phonon coupling. In previous work, NIS junctions have been used to cool detectors and bulk objects that were integrated with the membrane, but could not be considered a general-purpose refrigerator since they could not cool arbitrary objects. The goal of this work has been to demonstrate a general-purpose NIS refrigerator to which a user can attach arbitrary bulk objects. First, we discuss NIS refrigeration and then develop a model to predict phonon cooling. We fabricated and tested NIS refrigerators capable of cooling bulk objects and used the model to explain the results. The devices were able to cool phonons from 300 mK to 154 mK with 100 pW of cooling power at 200 mK. With these devices, we were able to cool a 2 cm3 piece of copper from 290 mK to 256 mK with 700 pW of cooling power at 290 mK. This demonstration marks the emergence of NIS refrigerators as a true, general-purpose refrigerator since users can attach arbitrary objects. Measurements of Andreev reflections in the devices and next-generation refrigerators that cool electrons from 100 mK to below 50 mK are also presented.

  15. Navy superconductivity efforts

    Science.gov (United States)

    Gubser, D. U.

    1990-04-01

    Both the new high temperature superconductors (HTS) and the low temperature superconductors (LTS) are important components of Navy's total plan to integrate superconductivity into field operational systems. Fundamental research is an important component of the total Navy program and focuses on the HTS materials. Power applications (ship propulsion, etc.) use LTS materials while space applications (MMW electronics, etc.) use HTS materials. The Space Experiment being conducted at NRL will involve space flight testing of HTS devices built by industry and will demonstrate the ability to engineer and space qualify these devices for systems use. Another important component of the Navy's effort is the development of Superconducting Quantum Interference Device (SQUID) magnetometers. This program will use LTS materials initially, but plans to implement HTS materials as soon as possible. Hybrid HTS/LTS systems are probable in many applications. A review of the status of the Navy's HTS materials research is given as well as an update on the Navy's development efforts in superconductivity, with particular emphasis on the related SDIO sponsored program on HTS applications.

  16. US Navy superconductivity program

    Science.gov (United States)

    Gubser, Donald U.

    1991-01-01

    Both the new high temperature superconductors (HTS) and the low temperature superconductors (LTS) are important components of the Navy's total plan to integrate superconductivity into field operational systems. Fundamental research is an important component of the total Navy program and focuses on the HTS materials. Power applications (ship propulsion) use LTS materials while space applications (millimeter wave electronics) use HTS materials. The Space Experiment to be conducted at NRL will involve space flight testing of HTS devices built by industry and will demonstrate the ability to engineer and space qualify these devices for systems use. Another important component of the Navy's effort is the development of Superconducting Quantum Interference Device (SQUID) magnetometers. This program will use LTS materials initially, but plans to implement HTS materials as soon as possible. Hybrid HTS/LTS systems are probable in many applications. A review of the status of the Navy's HTS materials research is given as well as an update on the Navy's development efforts in superconductivity.

  17. Navy superconductivity efforts

    Science.gov (United States)

    Gubser, D. U.

    1990-01-01

    Both the new high temperature superconductors (HTS) and the low temperature superconductors (LTS) are important components of Navy's total plan to integrate superconductivity into field operational systems. Fundamental research is an important component of the total Navy program and focuses on the HTS materials. Power applications (ship propulsion, etc.) use LTS materials while space applications (MMW electronics, etc.) use HTS materials. The Space Experiment being conducted at NRL will involve space flight testing of HTS devices built by industry and will demonstrate the ability to engineer and space qualify these devices for systems use. Another important component of the Navy's effort is the development of Superconducting Quantum Interference Device (SQUID) magnetometers. This program will use LTS materials initially, but plans to implement HTS materials as soon as possible. Hybrid HTS/LTS systems are probable in many applications. A review of the status of the Navy's HTS materials research is given as well as an update on the Navy's development efforts in superconductivity, with particular emphasis on the related SDIO sponsored program on HTS applications.

  18. Electronic structure of the superconducting layered ternary nitrides CaTaN2 and CaNbN2

    Science.gov (United States)

    Oliva, Josep M.; Weht, Ruben; Ordejón, Pablo; Canadell, Enric

    2000-07-01

    The electronic structure of the layered ternary nitrides CaMN2 (M= Ta, Nb) has been studied and the results are compared with those for the related LiMoN2 phase. It is shown that the former are two-dimensional metals, with a Fermi surface very similar to that of the 1T-TaX2 (X= S, Se) dichalcogenides, whereas the latter is a three-dimensional metal. The three phases show strong covalent bonding within the layers but ionic bonding with the alkali atom sheets.

  19. Functional renormalization group study of orbital fluctuation mediated superconductivity: Impact of the electron-boson coupling vertex corrections

    Science.gov (United States)

    Tazai, Rina; Yamakawa, Youichi; Tsuchiizu, Masahisa; Kontani, Hiroshi

    2016-09-01

    In various multiorbital systems, the emergence of the orbital fluctuations and their role on the pairing mechanism attract increasing attention. To achieve deep understanding on these issues, we perform a functional renormalization group (fRG) study for the two-orbital Hubbard model. The vertex corrections for the electron-boson coupling (U -VC), which are dropped in the Migdal-Eliashberg gap equation, are obtained by solving the RG equation. We reveal that the dressed electron-boson coupling for the charge channel Ûeffc becomes much larger than the bare Coulomb interaction Û 0 due to the U -VC in the presence of moderate spin fluctuations. For this reason, the attractive pairing interaction due to the charge or orbital fluctuations is enlarged by the factor (Ûeffc/Û0) 2≫1 . In contrast, the spin fluctuation pairing interaction is suppressed by the spin-channel U -VC, because of the relation Ûeffs≪Û 0 . The present study demonstrates that the orbital or charge fluctuation pairing mechanism can be realized in various multiorbital systems thanks to the U -VC, such as in Fe-based superconductors.

  20. Proximity Action theory of superconductive nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Skvortsov, M A; Larkin, A I; Feigel' man, M V [L D Landau Institute for Theoretical Physics, Russian Academy of Sciences, ul. Kosygina 2, 117940 Moscow (Russian Federation)

    2001-10-01

    We review a novel approach to the superconductive proximity effect in disordered normal-superconducting (N-S) structures. The method is based on the multicharge Keldysh action and is suitable for the treatment of interaction and fluctuation effects. As an application of the formalism, we study the subgap conductance and noise in two-dimensional N-S systems in the presence of the electron-electron interaction in the Cooper channel. It is shown that singular nature of the interaction correction at large scales leads to a nonmonotonuos temperature, voltage and magnetic field dependence of the Andreev conductance. (4. mesoscopic superconductivity)

  1. Normal state electronic structure and the superconducting energy gap in HTSC's as determined from photoemission spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Arko, A.J.; List, R.S.; Bartlett, R.J.; Cheong, S.W.; Fisk, Z.; Thompson, J.D. (Los Alamos National Lab., NM (USA)); Olson, C.G.; Yang, A.B.; Liu, R.; Gu, C. (Ames Lab., IA (USA)); Veal, B.W.; Liu, J.Z.; Paulikas, A.P.; Vandervoort, K.; Claus, H.; Campuzano, J.C. (Argonne National Lab., IL (USA))

    1989-01-01

    Photoemission spectroscopy has been utilized to determine the electronic structure of high-T{sub c} materials. The observation of dispersive bands at E{sub F} suggests a Fermi surface similar to that obtained from a band calculation. The results apparently are not inconsistent with the notion of a correlated Fermi liquid consisting of hybridized p-d bands. However, it is becoming more and more difficult to distinguish between Fermi liquid behavior in the new high-T{sub c} superconductors and behavior expected on the basis of the novel new non-Fermi liquid theories. The differences are now predicted to be on an energy scale smaller than our experimental resolution. We point out that, while deviations from simple band theory certainly do exist in the form of core and valence band satellites, band narrowing, and rapid photoemission peak broadening away from E{sub F}, there are sufficient agreements with the overall DOS that it should be considered a good starting point for the electronic structure. For example, the calculated Fermi surface for both the 123 and 2212 structures is reasonably well reproduced experimentally and the bands at E{sub F} consist of p-d hybridized orbitals just as predicted by local density functional theory. Our spectra clearly show that a BCS-like DOS is obtained at the Fermi energy as a gap opens up below T{sub c}. This is just one more indication that the old conventional models should be considered more seriously. 18 refs., 6 figs.

  2. Gap distributions and spatial variation of electronic states in superconducting and pseudogap states of Bi{sub 2}Sr{sub 2}Ca{sub 2}CuO{sub 8+{delta}}

    Energy Technology Data Exchange (ETDEWEB)

    Gomes, K.K.; Pasupathy, A.; Pushp, A. [Department of Physics, Joseph Henry Laboratories, Princeton University, Princeton, NJ 08544 (United States); Ono, S.; Ando, Y. [Central Research Institute of Electric Power Industry, Komae, Tokyo 201-8511 (Japan); Yazdani, A. [Department of Physics, Joseph Henry Laboratories, Princeton University, Princeton, NJ 08544 (United States)], E-mail: yazdani@princeton.edu

    2007-09-01

    High-resolution scanning tunneling microscopy has been used to study the tunneling density of states in lightly underdoped samples of the high-T{sub c} superconductor Bi{sub 2}Sr{sub 2}Ca{sub 2}CuO{sub 8+{delta}} in both the superconducting and pseudogap states. We demonstrate that the tunneling gaps observed in these two states have identical spatial distributions and correlation lengths. This observation suggests that the two gaps, and hence the two phenomena, cannot have a competing origin. In addition, we present measurements that show that in contrast to the superconducting state, in which low energy quasi-particles are homogenous in real space, the states near the Fermi level are spatially inhomogeneous in the pseudogap state. The variation of the low-energy electronic states is spatially correlated with local changes in the pseudogap.

  3. Superconductivity in nanowires

    CERN Document Server

    Bezryadin, Alexey

    2012-01-01

    The importance and actuality of nanotechnology is unabated and will be for years to come. A main challenge is to understand the various properties of certain nanostructures, and how to generate structures with specific properties for use in actual applications in Electrical Engineering and Medicine.One of the most important structures are nanowires, in particular superconducting ones. They are highly promising for future electronics, transporting current without resistance and at scales of a few nanometers. To fabricate wires to certain defined standards however, is a major challenge, and so i

  4. Introduction to superconductivity

    CERN Document Server

    Rose-Innes, AC

    1978-01-01

    Introduction to Superconductivity differs from the first edition chiefly in Chapter 11, which has been almost completely rewritten to give a more physically-based picture of the effects arising from the long-range coherence of the electron-waves in superconductors and the operation of quantum interference devices. In this revised second edition, some further modifications have been made to the text and an extra chapter dealing with """"high-temperature"""" superconductors has been added. A vast amount of research has been carried out on these since their discovery in 1986 but the results, both

  5. Overview on superconducting photoinjectors

    CERN Document Server

    Arnold, A

    2011-01-01

    The success of most of the proposed energy recovery linac (ERL) based electron accelerator projects for future storage ring replacements (SRR) and high power IR–free-electron lasers (FELs) largely depends on the development of an appropriate source. For example, to meet the FEL specifications [J.W. Lewellen, Proc. SPIE Int. Soc. Opt. Eng. 5534, 22 (2004)] electron beams with an unprecedented combination of high brightness, low emittance (0.1 µmrad), and high average current (hundreds of mA) are required. An elegant way to create a beam of such quality is to combine the high beam quality of a normal conducting rf photoinjector with the superconducting technology, i.e., to build a superconducting rf photoinjector (SRF gun). SRF gun R&D programs based on different approaches have been launched at a growing number of institutes and companies (AES, Beijing University, BESSY, BNL, DESY, FZD, TJNAF, Niowave, NPS, Wisconsin University). Substantial progress was achieved in recent years and the first long term ...

  6. Measurement of groove features and dimensions of the vertical test cathode and the choke joint of the superconducting electron gun cavity of the Energy Recovery LINAC

    Energy Technology Data Exchange (ETDEWEB)

    Hammons, L.; Ke, M.

    2011-10-13

    A testing program for the superconducting electron gun cavity that has been designed for the Energy Recovery LINAC is being planned. The goal of the testing program is to characterize the RF properties of the gun cavity at superconducting temperatures and, in particular, to study multipacting that is suspected to be occurring in the choke joint of the cavity where the vertical test cathode is inserted. The testing program will seek to understand the nature and cause of this multipacting and attempt to eliminate it, if possible, by supplying sufficient voltage to the cavity. These efforts are motivated by the multipacting issues that have been observed in the processing of the fine-grain niobium gun cavity. This cavity, which is being processed at Thomas Jefferson National Laboratory for Brookhaven, has encountered multipacting at a gradient of approximately 3 MV/m and, to date, has resisted efforts at elimination. Because of this problem, a testing program is being established here in C-AD that will use the large-grain niobium gun cavity that currently resides at Brookhaven and has been used for room-temperature measurements. The large-grain and fine-cavities are identical in every aspect of construction and only differ in niobium grain size. Thus, it is believed that testing and conditioning of the large-grain cavity should yield important insights about the fine-grain cavity. One element of this testing program involves characterizing the physical features of the choke joint of the cavity where the multipacting is believed to be occurring and, in particular the grooves of the joint. The configuration of the cavity and the vertical test cathode is shown in Figure 1. In addition, it is important to characterize the groove of the vertical test cathode. The grooved nature of these two components was specifically designed to prevent multipacting. However, it is suspected that, because of the chemical processing that the fine-grain gun cavity underwent along with the

  7. EBIT装置零蒸发低温超导磁体系统的研制%Development of the superconducting magnet system with zero evaporation for Electron Beam Ion Trap ( EBIT )

    Institute of Scientific and Technical Information of China (English)

    张敏; 付云清; 陈文革; 王福堂; 陈治友; 何鹏; 朱加伍; 黄鹏程; 王超; 路迪

    2011-01-01

    Development of the superconducting magnet system with zero evaporation for Electron Beam Ion Trap (EBIT) was almost completed. The superconducting magnet of EBIT was arranged by a pair of split coils up and down, and the peak of magnetic field strength of superconducting magnet was up to 4.5 T, the uniformity was better than 2×10 in the range of ± 10mm on the central axis of magnet, and the time decaying ratio of magnet was better than 1 ×10-4 in 8h with closed - loop current. In order to reduce the consumption of liquid helium, the cryogenic system included two cooling - shields cooled by two stage G - M refrigerator. At present, the performance test results show the superconducting magnet of EBIT can meet that user's basic demands.%介绍了EBIT( Electron Beam Ion Trap,电子束离子阱)装置零蒸发低温超导磁体系统的研制过程与超导磁体的性能测试结果.该系统中超导磁体由一对上下布置的分离线圈组成,中心最大磁场强度可达4.5T,在中心轴线上±10mm内磁场均匀度优于2×10-4,磁场衰减系数在8h小于1×10-4;同时其低温杜瓦系统采用双冷屏结构,并通过二级G-M制冷机冷却冷屏来降低液氦的蒸发量.超导磁体的性能测试结果表明满足用户基本要求.

  8. Superconducting gap anomaly in heavy fermion systems

    Indian Academy of Sciences (India)

    G C Rout; M S Ojha; S N Behera

    2008-04-01

    The heavy fermion system (HFS) is described by the periodic Anderson model (PAM), treating the Coulomb correlation between the -electrons in the mean-field Hartree-Fock approximation. Superconductivity is introduced by a BCS-type pairing term among the conduction electrons. Within this approximation the equation for the superconducting gap is derived, which depends on the effective position of the energy level of the -electrons relative to the Fermi level. The latter in turn depends on the occupation probability f of the -electrons. The gap equation is solved self-consistently with the equation for f; and their temperature dependences are studied for different positions of the bare -electron energy level, with respect to the Fermi level. The dependence of the superconducting gap on the hybridization leads to a re-entrant behaviour with increasing strength. The induced pairing between the -electrons and the pairing of mixed conduction and -electrons due to hybridization are also determined. The temperature dependence of the hybridization parameter, which characterizes the number of electrons with mixed character and represents the number of heavy electrons is studied. This number is shown to be small. The quasi-particle density of states (DOS) shows the existence of a pseudo-gap due to superconductivity and the signature of a hybridization gap at the Fermi level. For the choice of the model parameters, the DOS shows that the HFS is a metal and undergoes a transition to the gap-less superconducting state.

  9. Effects of TiO{sub 2} addition and electron irradiation on superconducting and mechanical properties of Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8} (Bi-2212) superconductor

    Energy Technology Data Exchange (ETDEWEB)

    Hamid, Nasri A., E-mail: Nasri@uniten.edu.my; Abdullah, Mohamad Hafizi Pandak [Nuclear Energy Center, College of Engineering, Universiti Tenaga Nasional, Jalan IKRAM-UNITEN, 43000 Kajang, Selangor (Malaysia); Abdullah, Yusof [Materials Technology Group, Industrial Technology Division, Malaysian Nuclear Agency, Bangi, 43000 Kajang, Selangor (Malaysia)

    2014-02-12

    Titanium Oxide (TiO{sub 2}) compounds having very high melting point with lower heat capacity, is an excellent candidate for reinforcement of brittle materials such as superconductor ceramics. In addition to high melting point, the TiO{sub 2} is also capable of establishing flux pinning centers in bismuth-based superconductors such as the Bi-2212. To further enhance the flux pinning properties, irradiation is one of the techniques that can be used to re-create the required point defects. In this study, the effects of TiO{sub 2} addition and electron irradiation on Bi-2212 superconductor were studied. TiO{sub 2} added Bi-2212 superconductor samples with 5%, 10% and 15% weight percentage addition respectively, were prepared using the conventional solid-state reaction method. The samples were irradiated with electron beam with radiation dose of 100 KGray. Characterization was performed by X-ray Diffraction (XRD) and Scanning Electron Microscopy (SEM). The transition temperature (T{sub c}) and the critical current density (J{sub c}) of the samples were also measured. The XRD patterns for all the samples show well-defined peaks all of which could be indexed on the basis of a Bi-2212 phase structure. In addition, the XRD patterns indicate that electron irradiation did not change the structure of Bi-2212 superconducting phase. Results of SEM micrographs show disorientation in the texture of the microstructure for samples that are subjected to electron irradiation. The grains are seen to align randomly with higher degree of orientation. With regard to TiO{sub 2} additions, only small TiO{sub 2} addition sustained the superconducting properties upon irradiation. Addition of more than 5% weight percentage of TiO{sub 2} degrades the superconducting properties of the irradiated samples. Formation of weak-links may result in higher grain boundaries orientation within the superconducting grains and thus deteriorates the inter-grains connectivity and resulted in lower T{sub c

  10. Sensing with Superconducting Point Contacts

    Directory of Open Access Journals (Sweden)

    Argo Nurbawono

    2012-05-01

    Full Text Available Superconducting point contacts have been used for measuring magnetic polarizations, identifying magnetic impurities, electronic structures, and even the vibrational modes of small molecules. Due to intrinsically small energy scale in the subgap structures of the supercurrent determined by the size of the superconducting energy gap, superconductors provide ultrahigh sensitivities for high resolution spectroscopies. The so-called Andreev reflection process between normal metal and superconductor carries complex and rich information which can be utilized as powerful sensor when fully exploited. In this review, we would discuss recent experimental and theoretical developments in the supercurrent transport through superconducting point contacts and their relevance to sensing applications, and we would highlight their current issues and potentials. A true utilization of the method based on Andreev reflection analysis opens up possibilities for a new class of ultrasensitive sensors.

  11. Itinerant Ferromagnetism and Superconductivity

    OpenAIRE

    Karchev, Naoum

    2004-01-01

    Superconductivity has again become a challenge following the discovery of unconventional superconductivity. Resistance-free currents have been observed in heavy-fermion materials, organic conductors and copper oxides. The discovery of superconductivity in a single crystal of $UGe_2$, $ZrZn_2$ and $URhGe$ revived the interest in the coexistence of superconductivity and ferromagnetism. The experiments indicate that: i)The superconductivity is confined to the ferromagnetic phase. ii)The ferromag...

  12. Gossamer high-temperature bulk superconductivity in FeSe

    Science.gov (United States)

    Sinchenko, A. A.; Grigoriev, P. D.; Orlov, A. P.; Frolov, A. V.; Shakin, A.; Chareev, D. A.; Volkova, O. S.; Vasiliev, A. N.

    2017-04-01

    Using the anisotropic electron transport and susceptibility measurements we demonstrate the appearance of inhomogeneous gossamer superconductivity in FeSe single crystals at ambient pressure and at temperature five times higher than its zero resistance Tc. We also find and quantitatively describe a general property: If inhomogeneous superconductivity in a anisotropic conductor first appears in the form of isolated superconducting islands, it reduces electric resistivity anisotropically with maximal effect along the least conducting axis. This gives a simple tool to study inhomogeneous superconductivity in various anisotropic compounds, which helps to investigate the onset of high-temperature superconductivity.

  13. Superconductivity in compensated and uncompensated semiconductors.

    Science.gov (United States)

    Yanase, Youichi; Yorozu, Naoyuki

    2008-12-01

    We investigate the localization and superconductivity in heavily doped semiconductors. The crossover from the superconductivity in the host band to that in the impurity band is described on the basis of the disordered three-dimensional attractive Hubbard model for binary alloys. The microscopic inhomogeneity and the thermal superconducting fluctuation are taken into account using the self-consistent 1-loop order theory. The superconductor-insulator transition accompanies the crossover from the host band to the impurity band. We point out an enhancement of the critical temperature Tc around the crossover. Further localization of electron wave functions leads to the localization of Cooper pairs and induces the pseudogap. We find that both the doping compensation by additional donors and the carrier increase by additional acceptors suppress the superconductivity. A theoretical interpretation is proposed for the superconductivity in the boron-doped diamond, SiC, and Si.

  14. Superconductivity in compensated and uncompensated semiconductors

    Directory of Open Access Journals (Sweden)

    Youichi Yanase and Naoyuki Yorozu

    2008-01-01

    Full Text Available We investigate the localization and superconductivity in heavily doped semiconductors. The crossover from the superconductivity in the host band to that in the impurity band is described on the basis of the disordered three-dimensional attractive Hubbard model for binary alloys. The microscopic inhomogeneity and the thermal superconducting fluctuation are taken into account using the self-consistent 1-loop order theory. The superconductor-insulator transition accompanies the crossover from the host band to the impurity band. We point out an enhancement of the critical temperature Tc around the crossover. Further localization of electron wave functions leads to the localization of Cooper pairs and induces the pseudogap. We find that both the doping compensation by additional donors and the carrier increase by additional acceptors suppress the superconductivity. A theoretical interpretation is proposed for the superconductivity in the boron-doped diamond, SiC, and Si.

  15. Superconducting Radio Frequency Technology: An Overview

    Energy Technology Data Exchange (ETDEWEB)

    Peter Kneisel

    2003-06-01

    Superconducting RF cavities are becoming more often the choice for larger scale particle accelerator projects such as linear colliders, energy recovery linacs, free electron lasers or storage rings. Among the many advantages compared to normal conducting copper structures, the superconducting devices dissipate less rf power, permit higher accelerating gradients in CW operation and provide better quality particle beams. In most cases these accelerating cavities are fabricated from high purity bulk niobium, which has superior superconducting properties such as critical temperature and critical magnetic field when compared to other superconducting materials. Research during the last decade has shown, that the metallurgical properties--purity, grain structure, mechanical properties and oxidation behavior--have significant influence on the performance of these accelerating devices. This contribution attempts to give a short overview of the superconducting RF technology with emphasis on the importance of the material properties of the high purity niobium.

  16. Superconductivity: The persistence of pairs

    Energy Technology Data Exchange (ETDEWEB)

    Edelman, Alex; Littlewood, Peter

    2015-05-20

    Superconductivity stems from a weak attraction between electrons that causes them to form bound pairs and behave much like bosons. These so-called Cooper pairs are phase coherent, which leads to the astonishing properties of zero electrical resistance and magnetic flux expulsion typical of superconducting materials. This coherent state may be qualitatively understood within the Bose–Einstein condensate (BEC) model, which predicts that a gas of interacting bosons will become unstable below a critical temperature and condense into a phase of matter with a macroscopic, coherent population in the lowest energy state, as happens in 4He or cold atomic gases. The successful theory proposed by Bardeen, Cooper and Schrieffer (BCS) predicts that at the superconducting transition temperature Tc, electrons simultaneously form pairs and condense, with no sign of pairing above Tc. Theorists have long surmised that the BCS and BEC models are opposite limits of a single theory and that strong interactions or low density can, in principle, drive the system to a paired state at a temperature Tpair higher than Tc, making the transition to the superconducting state BEC-like (Fig. 1). Yet most superconductors to date are reasonably well described by BCS theory or its extensions, and there has been scant evidence in electronic materials for the existence of pairing independent of the full superconducting state (though an active debate rages over the cuprate superconductors). Writing in Nature, Jeremy Levy and colleagues have now used ingenious nanostructured devices to provide evidence for electron pairing1. Perhaps surprisingly, the material they have studied is a venerable, yet enigmatic, low-temperature superconductor, SrTiO3.

  17. Topological superconductivity induced by ferromagnetic metal chains

    Science.gov (United States)

    Li, Jian; Chen, Hua; Drozdov, Ilya K.; Yazdani, A.; Bernevig, B. Andrei; MacDonald, A. H.

    2014-12-01

    Recent experiments have provided evidence that one-dimensional (1D) topological superconductivity can be realized experimentally by placing transition-metal atoms that form a ferromagnetic chain on a superconducting substrate. We address some properties of this type of system by using a Slater-Koster tight-binding model to account for important features of the electronic structure of the transition-metal chains on the superconducting substrate. We predict that topological superconductivity is nearly universal when ferromagnetic transition-metal chains form straight lines on superconducting substrates and that it is possible for more complex chain structures. When the chain is weakly coupled to the substrate and is longer than superconducting coherence lengths, its proximity-induced superconducting gap is ˜Δ ESO/J where Δ is the s -wave pair potential on the chain, ESO is the spin-orbit splitting energy induced in the normal chain state bands by hybridization with the superconducting substrate, and J is the exchange splitting of the ferromagnetic chain d bands. Because of the topological character of the 1D superconducting state, Majorana end modes appear within the gaps of finite length chains. We find, in agreement with the experiment, that when the chain and substrate orbitals are strongly hybridized, Majorana end modes are substantially reduced in amplitude when separated from the chain end by less than the coherence length defined by the p -wave superconducting gap. We conclude that Pb is a particularly favorable substrate material for ferromagnetic chain topological superconductivity because it provides both strong s -wave pairing and strong Rashba spin-orbit coupling, but that there is an opportunity to optimize properties by varying the atomic composition and structure of the chain. Finally, we note that in the absence of disorder, a new chain magnetic symmetry, one that is also present in the crystalline topological insulators, can stabilize multiple

  18. Overview of Superconducting Photoinjectors

    CERN Document Server

    Arnold, A

    2009-01-01

    The success of most of the proposed ERL based electron accelerator projects for future storage ring replacements (SRR) and high power IR-FELs is contingent upon the development of an appropriate source. Electron beams with an unprecedented combination of high brightness, low emittance (0.1 µm rad) and high average current (hundreds of mA) are required to meet the FEL specification [1]. An elegant way to create such an unique beam is to combine the high beam quality of a normal conducting RF photo injector with the superconducting technology to get a superconducting RF photo injector (SRF gun). SRF gun R&D programs based on different approaches are under investigation at a growing number of institutes and companies (AES, Beijing University, BESSY, BNL, DESY, FZD, JLab, Niowave, NPS, Wisconsin University). Lot of progress could be achieved during the last years and first long term operation was demonstrated at the FZD [2]. In the near future, this effort will lead to SRF guns, which are indispensab...

  19. High field superconducting magnets

    Science.gov (United States)

    Hait, Thomas P. (Inventor); Shirron, Peter J. (Inventor)

    2011-01-01

    A superconducting magnet includes an insulating layer disposed about the surface of a mandrel; a superconducting wire wound in adjacent turns about the mandrel to form the superconducting magnet, wherein the superconducting wire is in thermal communication with the mandrel, and the superconducting magnet has a field-to-current ratio equal to or greater than 1.1 Tesla per Ampere; a thermally conductive potting material configured to fill interstices between the adjacent turns, wherein the thermally conductive potting material and the superconducting wire provide a path for dissipation of heat; and a voltage limiting device disposed across each end of the superconducting wire, wherein the voltage limiting device is configured to prevent a voltage excursion across the superconducting wire during quench of the superconducting magnet.

  20. Superconductivity in Ca-doped graphene laminates

    Science.gov (United States)

    Chapman, J.; Su, Y.; Howard, C. A.; Kundys, D.; Grigorenko, A. N.; Guinea, F.; Geim, A. K.; Grigorieva, I. V.; Nair, R. R.

    2016-01-01

    Despite graphene’s long list of exceptional electronic properties and many theoretical predictions regarding the possibility of superconductivity in graphene, its direct and unambiguous experimental observation has not been achieved. We searched for superconductivity in weakly interacting, metal decorated graphene crystals assembled into so-called graphene laminates, consisting of well separated and electronically decoupled graphene crystallites. We report robust superconductivity in all Ca-doped graphene laminates. They become superconducting at temperatures (Tc) between ≈4 and ≈6 K, with Tc’s strongly dependent on the confinement of the Ca layer and the induced charge carrier concentration in graphene. We find that Ca is the only dopant that induces superconductivity in graphene laminates above 1.8 K among several dopants used in our experiments, such as potassium, caesium and lithium. By revealing the tunability of the superconducting response through doping and confinement of the metal layer, our work shows that achieving superconductivity in free-standing, metal decorated monolayer graphene is conditional on an optimum confinement of the metal layer and sufficient doping, thereby bringing its experimental realization within grasp. PMID:26979564

  1. Superconductivity in Ca-doped graphene laminates

    Science.gov (United States)

    Chapman, J.; Su, Y.; Howard, C. A.; Kundys, D.; Grigorenko, A. N.; Guinea, F.; Geim, A. K.; Grigorieva, I. V.; Nair, R. R.

    2016-03-01

    Despite graphene’s long list of exceptional electronic properties and many theoretical predictions regarding the possibility of superconductivity in graphene, its direct and unambiguous experimental observation has not been achieved. We searched for superconductivity in weakly interacting, metal decorated graphene crystals assembled into so-called graphene laminates, consisting of well separated and electronically decoupled graphene crystallites. We report robust superconductivity in all Ca-doped graphene laminates. They become superconducting at temperatures (Tc) between ≈4 and ≈6 K, with Tc’s strongly dependent on the confinement of the Ca layer and the induced charge carrier concentration in graphene. We find that Ca is the only dopant that induces superconductivity in graphene laminates above 1.8 K among several dopants used in our experiments, such as potassium, caesium and lithium. By revealing the tunability of the superconducting response through doping and confinement of the metal layer, our work shows that achieving superconductivity in free-standing, metal decorated monolayer graphene is conditional on an optimum confinement of the metal layer and sufficient doping, thereby bringing its experimental realization within grasp.

  2. Superconductivity in Ca-doped graphene laminates.

    Science.gov (United States)

    Chapman, J; Su, Y; Howard, C A; Kundys, D; Grigorenko, A N; Guinea, F; Geim, A K; Grigorieva, I V; Nair, R R

    2016-03-16

    Despite graphene's long list of exceptional electronic properties and many theoretical predictions regarding the possibility of superconductivity in graphene, its direct and unambiguous experimental observation has not been achieved. We searched for superconductivity in weakly interacting, metal decorated graphene crystals assembled into so-called graphene laminates, consisting of well separated and electronically decoupled graphene crystallites. We report robust superconductivity in all Ca-doped graphene laminates. They become superconducting at temperatures (Tc) between ≈4 and ≈6 K, with Tc's strongly dependent on the confinement of the Ca layer and the induced charge carrier concentration in graphene. We find that Ca is the only dopant that induces superconductivity in graphene laminates above 1.8 K among several dopants used in our experiments, such as potassium, caesium and lithium. By revealing the tunability of the superconducting response through doping and confinement of the metal layer, our work shows that achieving superconductivity in free-standing, metal decorated monolayer graphene is conditional on an optimum confinement of the metal layer and sufficient doping, thereby bringing its experimental realization within grasp.

  3. International Conference on the Physics of Electronic and Atomic Collisions (16th), Held in New York, NY on 26 July-1 August 1989. Third Conference Program

    Science.gov (United States)

    1989-08-01

    Logic Memory and Packaging Department) Le Croy Instruments The University of Massachusetts MKS Instruments, Inc. Newport Corp. Questek, Inc...Banquet: El]Vegotanian H- Kosher Fi1 Othter Mk -’thod of Payment. H-- Chock (Please make chock payable to XVI ICPF AC., U S. Funds Only) L IMa-ster Card...In The Measurement Of Coherence Parameters 168 Tue 45 In Electron - Heavy Noble Gas Collisions A. ShukLa , K.E. Martus and K. Becker Measurement Of The

  4. Theory of superconductivity

    CERN Document Server

    Crisan, Mircea

    1989-01-01

    This book discusses the most important aspects of the theory. The phenomenological model is followed by the microscopic theory of superconductivity, in which modern formalism of the many-body theory is used to treat most important problems such as superconducting alloys, coexistence of superconductivity with the magnetic order, and superconductivity in quasi-one-dimensional systems. It concludes with a discussion on models for exotic and high temperature superconductivity. Its main aim is to review, as complete as possible, the theory of superconductivity from classical models and methods up t

  5. The insulating-to-superconducting transition in europium high-temperature superconducting ceramics

    CERN Document Server

    Rosenbaum, R

    1997-01-01

    Experiment resistivity data on high-temperature superconducting ceramics of fully oxygenated EuBa sub 2 Cu sub 3 sub - sub x Co sub x O sub y show that the insulating-to-superconducting transitions take place at liquid-helium temperature, provided that the cobalt fraction x exceeds 0.3. The resistivity follows a simple power-law dependence rho propor to T sup - sup 1 sup / sup 2 , attributed to electron-electron interactions. A model based upon intrinsic Josephson tunnelling junctions is suggested to explain the transition from insulating to superconducting states. (author)

  6. Superconductivity in LiFeAs probed with quasiparticle interference

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Zhixiang; Nag, Pranab Kumar; Baumann, Danny; Kappenberger, Rhea [Leibniz Institute for Solid State and Materials Research Dresden, IFW Dresden (Germany); Wurmehl, Sabine [Leibniz Institute for Solid State and Materials Research Dresden, IFW Dresden (Germany); Institute for Solid State Physics, TU Dresden (Germany); Buechner, Bernd [Leibniz Institute for Solid State and Materials Research Dresden, IFW Dresden (Germany); Institute for Solid State Physics, TU Dresden (Germany); Center for Transport and Devices, TU Dresden (Germany); Hess, Christian [Leibniz Institute for Solid State and Materials Research Dresden, IFW Dresden (Germany); Center for Transport and Devices, TU Dresden (Germany)

    2016-07-01

    In spite of many theoretical and experimental efforts on studying the superconductivity of iron-based high temperature superconductors, the puzzle about LiFeAs's superconducting mechanism and pairing symmetry are still not clear. Here we want to present our low temperature scanning tunneling microscopy results on probing the superconductivity of LiFeAs. By taking conductance spectroscopic maps for both the superconducting state and normal state, we identify the scatterings due to the electron and hole bands close to the Fermi level. We observe a strong indication that the superconducting behavior in the hole bands are important for the formation of superconductivity in LiFeAs. Our results may also shine light on understanding the superconductivity in other iron pnictide superconductors.

  7. Superconducting linear accelerator system for NSC

    Indian Academy of Sciences (India)

    P N Prakash; T S Datta; B P Ajith Kumar; J Antony; P Barua; J Chacko; A Choudhury; G K Chadhari; S Ghosh; S Kar; S A Krishnan; Manoj Kumar; Rajesh Kumar; A Mandal; D S Mathuria; R S Meena; R Mehta; K K Mistri; A Pandey; M V Suresh Babu; B K Sahu; A Sarkar; S S K Sonti; A Rai; S Venkatramanan; J Zacharias; R K Bhowmik; A Roy

    2002-11-01

    This paper reports the construction of a superconducting linear accelerator as a booster to the 15 UD Pelletron accelerator at Nuclear Science Centre, New Delhi. The LINAC will use superconducting niobium quarter wave resonators as the accelerating element. Construction of the linear accelerator has progressed sufficiently. Details of the entire accelerator system including the cryogenics facility, RF electronics development, facilities for fabricating niobium resonators indigenously, and present status of the project are presented.

  8. Superconducting Detectors for Superlight Dark Matter.

    Science.gov (United States)

    Hochberg, Yonit; Zhao, Yue; Zurek, Kathryn M

    2016-01-08

    We propose and study a new class of superconducting detectors that are sensitive to O(meV) electron recoils from dark matter-electron scattering. Such devices could detect dark matter as light as the warm dark-matter limit, m(X)≳1  keV. We compute the rate of dark-matter scattering off of free electrons in a (superconducting) metal, including the relevant Pauli blocking factors. We demonstrate that classes of dark matter consistent with terrestrial and cosmological or astrophysical constraints could be detected by such detectors with a moderate size exposure.

  9. Coexistence of ferromagnetism and superconductivity in YBCO nanoparticles.

    Science.gov (United States)

    Zhu, Zhonghua; Gao, Daqiang; Dong, Chunhui; Yang, Guijin; Zhang, Jing; Zhang, Jinlin; Shi, Zhenhua; Gao, Hua; Luo, Honggang; Xue, Desheng

    2012-03-21

    Nanoparticles of superconducting YBa(2)Cu(3)O(7-δ) were synthesized via a citrate pyrolysis technique. Room temperature ferromagnetism was revealed in the samples by a vibrating sample magnetometer. Electron spin resonance spectra at selected temperatures indicated that there is a transition from the normal to the superconducting state at temperatures below 100 K. The M-T curves with various applied magnetic fields showed that the superconducting transition temperatures are 92 K and 55 K for the air-annealed and the post-annealed samples, respectively. Compared to the air-annealed sample, the saturation magnetization of the sample by reheating the air-annealed one in argon atmosphere is enhanced but its superconductivity is weakened, which implies that the ferromagnetism maybe originates from the surface oxygen defects. By superconducting quantum interference device measurements, we further confirmed the ferromagnetic behavior at high temperatures and interesting upturns in field cooling magnetization curves within the superconducting region are found. We attributed the upturn phenomena to the coexistence of ferromagnetism and superconductivity at low temperatures. Room temperature ferromagnetism of superconducting YBa(2)Cu(3)O(7-δ) nanoparticles has been observed in some previous related studies, but the issue of the coexistence of ferromagnetism and superconductivity within the superconducting region is still unclear. In the present work, it will be addressed in detail. The cooperation phenomena found in the spin-singlet superconductors will help us to understand the nature of superconductivity and ferromagnetism in more depth.

  10. Simple Superconducting "Permanent" Electromagnet

    Science.gov (United States)

    Israelson, Ulf E.; Strayer, Donald M.

    1992-01-01

    Proposed short tube of high-temperature-superconducting material like YBa2Cu3O7 acts as strong electromagnet that flows as long as magnetic field remains below critical value and temperature of cylinder maintained sufficiently below superconducting-transition temperature. Design exploits maximally anisotropy of high-temperature-superconducting material.

  11. Basic principle of superconductivity

    OpenAIRE

    De Cao, Tian

    2007-01-01

    The basic principle of superconductivity is suggested in this paper. There have been two vital wrong suggestions on the basic principle, one is the relation between superconductivity and the Bose-Einstein condensation (BEC), and another is the relation between superconductivity and pseudogap.

  12. 17th international free electron laser conference and 2nd international FEL users` workshop. Program and abstracts

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    This workshop and conference were held together to enhance the interaction between FEL builders and users. Current topics of interest in FEL research form the basis for the oral presentations. The program for the User`s workshop was developed in a similar manner. Storage rings, linear accelerators, materials research and applications are all considered topics. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  13. Superconductivity in One-atomic-layer Metal Films

    Institute of Scientific and Technical Information of China (English)

    ZHANG Tong; CHEN Xi; WANG Yayu; LIU Ying; LIN Haiqing; JIA Jinfeng; XUE Qikun; CHENG Peng; LI Wenjuan; SUN Yujie; WANG Guang; ZHU Xicgang; HE Ke; WANG Lili; MA Xucun

    2011-01-01

    @@ Superconductivity is a peculiar quantum phenomenon which originates from the pairing of conduction electrons, followed by phase coherent condensation.Since the discovery by K.Onnes in 1911, superconductivity has been one of the hottest topics in physics for an entire century, and still attracts people's great interest.One of the intriguing issues is how superconductivity appears in low dimensional system where quantum size effect and surface/interface effect that large bulk material doesn't have may become crucial.

  14. Superconductivity in One-atomic-layer Metal Films

    Institute of Scientific and Technical Information of China (English)

    ZHANG Tong; CHENG Peng; LI Wenjuan; SUN Yujie; WANG Guang; ZHU Xiegang; HE Ke; WANG Lili; MA Xucun; CHEN Xi; WANG Yayu; LIU Ying; LIN Haiqing; JIA Jinfeng; XUE Qikun

    2011-01-01

    Superconductivity is a peculiar quantum phenomenon which originates from the pairing of conduction electrons, tbllowed by phase coherent condensation, Since the discovery by K. Onnes in 1911, superconductivity has been one of the hottest topics in physics for an entire century, and still attracts people's great interest. One of the intriguing issues is how superconductivity appears in low dimensional system where quantum size effect and surface/interface effect that large bulk material doesn't have may become crucial.

  15. Superconductivity of small metal grains

    Institute of Scientific and Technical Information of China (English)

    ZHENG; Renrong; CHEN; Zhiqian; ZHU; Shunquan

    2005-01-01

    The formulas of the energy gap and superconducting critical temperature appropriate for systems with both odd and even number of electrons are derived; the bases of the derivations are BCS theory and energy level statistics. Numerical results qualitatively agree with the experimental phenomena. i.e., the superconductivity of small metallic grains will first enhance then decrease to zero when the grain are getting smaller and smaller. The calculations indicate that the above phenomena happen in the metallic grains belonging to Gaussian Orthogonal Ensemble (GOE) and Gaussian Unitary ensemble (GUE) with zero spin; The superconductivity of small metallic grains in Gaussian Symplectic Ensemble (GSE) will monotonically decrease to zero with the decreasing of the grain size. The analyses suggest that the superconductivity enhancements come from pairing and the balance of the strengths between spin-orbital coupling and external magnetic field. In order to take the latter into account, it is necessary to include the level statistics given by Random Matrix Theory (RMT) in describing small metallic grains.

  16. Evaluating Superconducting YBCO Film Properties Using X-Ray Photoelectron Spectroscopy (Postprint)

    Science.gov (United States)

    2012-02-01

    AFRL-RZ-WP-TP-2012-0093 EVALUATING SUPERCONDUCTING YBCO FILM PROPERTIES USING X-RAY PHOTOELECTRON SPECTROSCOPY (POSTPRINT) Paul N. Barnes...2012 Conference Paper Postprint 01 January 2002 – 01 January 2004 4. TITLE AND SUBTITLE EVALUATING SUPERCONDUCTING YBCO FILM PROPERTIES USING X-RAY

  17. Multigap superconductivity and strong electron-boson coupling in Fe-based superconductors: a point-contact Andreev-reflection study of Ba(Fe(1-x)Co(x))2As2 single crystals.

    Science.gov (United States)

    Tortello, M; Daghero, D; Ummarino, G A; Stepanov, V A; Jiang, J; Weiss, J D; Hellstrom, E E; Gonnelli, R S

    2010-12-03

    Directional point-contact Andreev-reflection measurements in Ba(Fe(1-x)Co(x))2As2 single crystals (T(c) = 24.5 K) indicate the presence of two superconducting gaps with no line nodes on the Fermi surface. The point-contact Andreev-reflection spectra also feature additional structures related to the electron-boson interaction, from which the characteristic boson energy Ω(b)(T) is obtained, very similar to the spin-resonance energy observed in neutron scattering experiments. Both the gaps and the additional structures can be reproduced within a three-band s ± Eliashberg model by using an electron-boson spectral function peaked at Ω(0) = 12 meV ≃ Ω(b)(0).

  18. Anyon Superconductivity of Sb

    Science.gov (United States)

    Maksoed, Wh-; Parengkuan, August

    2016-10-01

    In any permutatives to Pedro P. Kuczhynski from Peru, for anyon superconductivity sought EZ Kuchinskii et al.: ``Anion height dependence of Tc & d.o.s of Fe-based Superconductors'', 2010 as well as ``on the basis of electron microscopy & AFM measurements, these phenomena are quantified with focus on fractal dimension, particle perimeter & size of the side branch(tip width) in bert Stegemann et al.:Crystallization of Sb nanoparticles-Pattern Formation & Fractal Growth'', J.PhysChem B., 2004. For dendritic & dendrimer fractal characters shown further: ``antimony denrites were found to be composed of well-crystallized nanoflakes with size 20-4 nm''- Bou Zhau, et al., MaterialLetters, 59 (2005). The alkyl triisopropyl attached in TIPSb those includes in DNA, haemoglobin membrane/fixed-bed reactor for instance quotes in Dragony Fu, Nature Review Cancer, 12 (Feb 2012). Heartfelt Gratitudes to HE. Mr. Prof. Ir. Handojo.

  19. Superconductivity of columbium

    Energy Technology Data Exchange (ETDEWEB)

    Cook, D.B.; Zemansky, M.W.; Boorse, H.A.

    1950-11-15

    Isothermal critical magnetic field curves and zero field transitions for several annealed specimens of columbium have been measured by an a.c. mutual inductance method at temperatures from 5.1 deg K to the zero field transition temperature. The H-T curve was found to fit the usual parabolic relationship H = H{sub 0}(1-T(2)/T(2){sub 0}) with H{sub 0} = 8250 oersteds and T{sub 0} = 8.65 deg K. The initial slope of the curve was 1910 oersteds/deg. The electronic specific heat in the normal state calculated from the thermodynamic equations is 0.0375T and the approximate Debye characteristic temperature in the superconducting state, 67 deg K. Results on a different grade of columbium with a tantalum impurity of 0.4 percent, according to neutron scattering measurements, were in agreement, with the data obtained from columbium of 0.2 percent maximum tantalum impurity.

  20. Design and fabrication of a superconducting magnet for an 18 GHz electron cyclotron resonance ion∕photon source NFRI-ECRIPS.

    Science.gov (United States)

    You, H-J; Jang, S-W; Jung, Y-H; Lho, T-H; Lee, S-J

    2012-02-01

    A superconducting magnet was designed and fabricated for an 18 GHz ECR ion∕photon source, which will be installed at National Fusion Research Institute (NFRI) in South Korea. The magnetic system consists of a set of four superconducting coils for axial mirror field and 36 pieces of permanent magnets for hexapolar field. The superconducting coils with a cryocooler (1.5 W @ 4.2 K) allow one to reach peak mirror fields of 2.2 T in the injection and those of 1.5 T in the extraction regions on the source axis, and the resultant hexapolar field gives 1.35 T on the plasma chamber wall. The unbalanced magnetic force between the coils and surrounding yoke has been minimized to 16 ton by a coil arrangement and their electrical connection, and then was successfully suspended by 12 strong thermal insulating supports made of large numbers of carbon fibers. In order to block radiative thermal losses, multilayer thermal insulations are covered on the coil windings as well as 40-K aluminum thermal shield. Also new schemes of quench detection and safety system (coil divisions, quench detection coils, and heaters) were employed. For impregnation of the windings a special epoxy has been selected and treated to have a higher breaking strength and a higher thermal conductivity, which enables the superconductors to be uniformly and rapidly cooled down or heated during a quench.

  1. Dichotomy of the electronic structure and superconductivity between single-layer and double-layer FeSe/SrTiO3 films.

    Science.gov (United States)

    Liu, Xu; Liu, Defa; Zhang, Wenhao; He, Junfeng; Zhao, Lin; He, Shaolong; Mou, Daixiang; Li, Fangsen; Tang, Chenjia; Li, Zhi; Wang, Lili; Peng, Yingying; Liu, Yan; Chen, Chaoyu; Yu, Li; Liu, Guodong; Dong, Xiaoli; Zhang, Jun; Chen, Chuangtian; Xu, Zuyan; Chen, Xi; Ma, Xucun; Xue, Qikun; Zhou, X J

    2014-09-23

    The latest discovery of possible high-temperature superconductivity in the single-layer FeSe film grown on a SrTiO3 substrate has generated much attention. Initial work found that, while the single-layer FeSe/SrTiO3 film exhibits a clear signature of superconductivity, the double-layer film shows an insulating behaviour. Such a marked layer-dependent difference is surprising and the underlying origin remains unclear. Here we report a comparative angle-resolved photoemission study between the single-layer and double-layer FeSe/SrTiO3 films annealed in vacuum. We find that, different from the single-layer FeSe/SrTiO3 film, the double-layer FeSe/SrTiO3 film is hard to get doped and remains in the semiconducting/insulating state under an extensive annealing condition. Such a behaviour originates from the much reduced doping efficiency in the bottom FeSe layer of the double-layer FeSe/SrTiO3 film from the FeSe-SrTiO3 interface. These observations provide key insights in understanding the doping mechanism and the origin of superconductivity in the FeSe/SrTiO3 films.

  2. Superconductivity in Medicine

    Science.gov (United States)

    Alonso, Jose R.; Antaya, Timothy A.

    2012-01-01

    Superconductivity is playing an increasingly important role in advanced medical technologies. Compact superconducting cyclotrons are emerging as powerful tools for external beam therapy with protons and carbon ions, and offer advantages of cost and size reduction in isotope production as well. Superconducting magnets in isocentric gantries reduce their size and weight to practical proportions. In diagnostic imaging, superconducting magnets have been crucial for the successful clinical implementation of magnetic resonance imaging. This article introduces each of those areas and describes the role which superconductivity is playing in them.

  3. Enhanced superconductivity of fullerenes

    Energy Technology Data Exchange (ETDEWEB)

    Washington, II, Aaron L.; Teprovich, Joseph A.; Zidan, Ragaiy

    2017-06-20

    Methods for enhancing characteristics of superconductive fullerenes and devices incorporating the fullerenes are disclosed. Enhancements can include increase in the critical transition temperature at a constant magnetic field; the existence of a superconducting hysteresis over a changing magnetic field; a decrease in the stabilizing magnetic field required for the onset of superconductivity; and/or an increase in the stability of superconductivity over a large magnetic field. The enhancements can be brought about by transmitting electromagnetic radiation to the superconductive fullerene such that the electromagnetic radiation impinges on the fullerene with an energy that is greater than the band gap of the fullerene.

  4. Superconducting microfabricated ion traps

    CERN Document Server

    Wang, Shannon X; Labaziewicz, Jaroslaw; Dauler, Eric; Berggren, Karl; Chuang, Isaac L

    2010-01-01

    We fabricate superconducting ion traps with niobium and niobium nitride and trap single 88Sr ions at cryogenic temperatures. The superconducting transition is verified and characterized by measuring the resistance and critical current using a 4-wire measurement on the trap structure, and observing change in the rf reflection. The lowest observed heating rate is 2.1(3) quanta/sec at 800 kHz at 6 K and shows no significant change across the superconducting transition, suggesting that anomalous heating is primarily caused by noise sources on the surface. This demonstration of superconducting ion traps opens up possibilities for integrating trapped ions and molecular ions with superconducting devices.

  5. Superconducting material development

    Science.gov (United States)

    1987-09-01

    A superconducting compound was developed that showed a transition to a zero-resistance state at 65 C, or 338 K. The superconducting material, which is an oxide based on strontium, barium, yttrium, and copper, continued in the zero-resistance state similar to superconductivity for 10 days at room temperature in the air. It was also noted that measurements of the material allowed it to observe a nonlinear characteristic curve between current and voltage at 65 C, which is another indication of superconductivity. The research results of the laboratory experiment with the superconducting material will be published in the August edition of the Japanese Journal of Applied Physics.

  6. Protective link for superconducting coil

    Science.gov (United States)

    Umans, Stephen D.

    2009-12-08

    A superconducting coil system includes a superconducting coil and a protective link of superconducting material coupled to the superconducting coil. A rotating machine includes first and second coils and a protective link of superconducting material. The second coil is operable to rotate with respect to the first coil. One of the first and second coils is a superconducting coil. The protective link is coupled to the superconducting coil.

  7. Electronic structures, hole-doping, and superconductivity of the s = 1, 2, 3, and 4 members of the (Cu,Mo)-12s2 homologous series of superconductive copper oxides.

    Science.gov (United States)

    Grigoraviciute, Inga; Karppinen, Maarit; Chan, Ting-Shan; Liu, Ru-Shi; Chen, Jin-Ming; Chmaissem, Omar; Yamauchi, Hisao

    2010-01-20

    We demonstrate that the T(c) value of superconductive copper oxides does not depend on the distance between two adjacent CuO(2) planes as long as the hole-doping level and the immediate (crystal) chemical surroundings of the planes are kept the same. Experimental evidence is accomplished for the homologous series of (Cu,Mo)-12s2, the member phases of which differ from each other by the number (s) of cation layers in the fluorite-structured (Ce,Y)-[O(2)-(Ce,Y)](s-1) block between the CuO(2) planes. X-ray absorption near-edge structure spectroscopy is employed as a probe for the hole states of these phases. The s = 1 member appears to be more strongly doped with holes than other phases of the series and accordingly to possess the highest T(c) value of 87 K. For s > or = 2, unexpectedly, both the CuO(2) plane hole concentration and the value of T(c) (approximately 55 K) remain constant, being independent of s.

  8. Superconductivity Series in Transition Metal Dichalcogenides by Ionic Gating

    NARCIS (Netherlands)

    Shi, Wu; Ye, Jianting; Zhang, Yijin; Suzuki, Ryuji; Yoshida, Masaro; Miyazaki, Jun; Inoue, Naoko; Saito, Yu; Iwasa, Yoshihiro

    2015-01-01

    Functionalities of two-dimensional (2D) crystals based on semiconducting transition metal dichalcogenides (TMDs) have now stemmed from simple field effect transistors (FETs) to a variety of electronic and opto-valleytronic devices, and even to superconductivity. Among them, superconductivity is the

  9. Superconductivity and Fast Proton Transport in Nanoconfined Water

    CERN Document Server

    Johnson, K H

    2016-01-01

    A real-space molecular-orbital description of Cooper pairing in conjunction with the dynamic Jahn-Teller mechanism for high-Tc superconductivity predicts that electron-doped water confined to the nanoscale environment of a carbon nanotube or biological macromolecule should superconduct below and exhibit fast proton transport above the transition temperature, Tc = 230 degK (-43 degC).

  10. Superconducting fault-current limiter and inductor design

    Science.gov (United States)

    Rogers, J. D.; Boenig, H. J.; Chowdhuri, P.; Schermer, R. I.; Wollan, J. J.; Weldon, D. M.

    1982-11-01

    A superconducting fault current limiter (SFCL) that uses a biased superconducting inductor in a diode or thyristor bridge circuit was analyzed for transmission systems in 69, 138, and 230 rms kV utility transmission systems. The limiter was evaluated for costs with all components, superconducting coil, diode and/or SCR power electronics, high voltage insulation, high voltage bushings and vapor cooled leads, dewar, and refrigerator, included. A design was undertaken for the superconducting cable and coils for both diode and SCR 69 kV limiter circuits.

  11. Superconducting fault-current limiter and inductor design

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, J.D.; Boenig, H.J.; Chowdhuri, P.; Schermer, R.I.; Wollan, J.J.; Weldon, D.M.

    1982-01-01

    A superconducting fault current limiter (SFCL) that uses a biased superconducting inductor in a diode or thyristor bridge circuit was analyzed for transmission systems in 69, 138, and 230 rms kV utility transmission systems. The limiter was evaluated for costs with all components - superconducting coil, diode and/or SCR power electronics, high voltage insulation, high voltage bushings and vapor cooled leads, dewar, and refrigerator - included. A design was undertaken for the superconducting cable and coils for both diode and SCR 69 kV limiter circuits.

  12. High-Tc Superconductivity and Raman Scattering Study of the phonon properties of electron doped (transition metal, rare-earth) - Oxygen-Free CaFeAsF and compared with RFeAsO system

    Science.gov (United States)

    Sasmal, Kalyan; Hadjiev, Viktor; Chu, C. W.(Paul)

    Quaternary CaFeAsF has ZrCuSiAs-type structure,(RO)δ+ layer in RFeAsO replaced by (CaF)δ+ layer,with tetragonal (P4/nmm)-orthorhombic (Cmma) phase transition at 134K,while magnetic order,SDW sets in at 114K. Partial replacement of Fe with Co/Ni is direct electron doping to (FeAs)δ+ layer.Tc ~15K in CaFe0.9Ni0.1AsF.Substitution of rare earth metal for alkaline earth metal suppresses anomaly in resistivity & induces superconductivity.Tc ~52K in Ca0.5Pr0.5FeAsF.Characterized by resistivity, susceptibility,XRD & EDX-SEM.Upper critical field estimated from magneto resistance.Bulk superconductivity proved by DC magnetization. Hall coefficient RH revealed hole-like charge carriers in parent compound CaFeAsF, while electron-type (RH in normal state is -Ve) for Ca0.5Pr0.5FeAsF.Evolution of Raman active phonons of Ca1-xPrxFeAsF measured with polarized Raman spectroscopy at room temperature from absurfaces of impurity-free microcrystals.Spectra exhibit sharp phonon lines on very weak electronic scattering background.Frequency and symmetry of Raman phonons involving out-of-plane atomic vibrations are found at 162.5 cm-1 (A1 g, Pr), 201 cm-1 (A1 g, As), 215.5 cm-1 (B1 g, Fe), 265 cm-1 (Eg, Fe) and 334 cm-1 (B1 g, F) for Ca0.5Pr0.5FeAsF.Observations are compared with RFeAsO unconventional superconductors also possibly related to magnetic fluctuations

  13. Structural, elastic and electronic properties of superconducting anti-perovskites MgCNi{sub 3}, ZnCNi{sub 3} and CdCNi{sub 3} from first principles

    Energy Technology Data Exchange (ETDEWEB)

    Shein, I.R.; Bannikov, V.V. [Institute of Solid State Chemistry, Ural Branch of the Russian Academy of Sciences, 620041, Ekaterinburg (Russian Federation); Ivanovskii, A.L. [Institute of Solid State Chemistry, Ural Branch of the Russian Academy of Sciences, 620041, Ekaterinburg (Russian Federation)], E-mail: ivanovskii@ihim.uran.ru

    2008-01-01

    First principle total energy calculations using the full potential linearized augmented plane wave (FP-LAPW) method with the generalized gradient approximation (GGA) for the exchange-correlation potential were performed to investigate the systematic trends for structural, elastic and electronic properties of the family of superconducting anti-perovskites MCNi{sub 3} depending from the type of M cations (M are Mg, Zn and Cd). In result the optimized lattice parameters, independent elastic constants (C{sub 11}, C{sub 12} and C{sub 44}), bulk modulus B, compressibility {beta}, shear modulus G and tetragonal shear modulus G' are evaluated. Further, for the first time the numerical estimates of a set of elastic parameters (bulk and shear modulus, Young's modulus Y, Poisson's ratio ({nu}), Lame's coefficients ({mu}, {lambda})) of the polycrystalline superconducting MCNi{sub 3} ceramics (in framework of the Voigt-Reuss-Hill approximation) were performed. Besides, the band structures, densities of states (DOS), total and site-projected l-decomposed DOS at the Fermi level, the shapes of the Fermi surfaces, the Sommerfeld's coefficients and the molar Pauli paramagnetic susceptibility for these anti-perovskites were obtained and analyzed in comparison with the available theoretical and experimental data.

  14. Pressure tuning of structure, superconductivity, and novel magnetic order in the Ce-underdoped electron-doped cuprate T '-Pr1.3 -xLa0.7CexCuO4 (x =0.1 )

    Science.gov (United States)

    Guguchia, Z.; Adachi, T.; Shermadini, Z.; Ohgi, T.; Chang, J.; Bozin, E. S.; von Rohr, F.; dos Santos, A. M.; Molaison, J. J.; Boehler, R.; Koike, Y.; Wieteska, A. R.; Frandsen, B. A.; Morenzoni, E.; Amato, A.; Billinge, S. J. L.; Uemura, Y. J.; Khasanov, R.

    2017-09-01

    High-pressure neutron powder diffraction, muon-spin rotation, and magnetization studies of the structural, magnetic, and the superconducting properties of the Ce-underdoped superconducting (SC) electron-doped cuprate system with the Nd2CuO4 (the so-called T')structure T '-Pr1.3 -xLa0.7CexCuO4 with x =0.1 are reported. A strong reduction of the in-plane and out-of-plane lattice constants is observed under pressure. However, no indication of any pressure-induced phase transition from T'to the K2NiF4 (the so-called T) structure is observed up to the maximum applied pressure of p = 11 GPa. Large and nonlinear increase of the short-range magnetic order temperature Tso in T '-Pr1.3 -xLa0.7CexCuO4 (x =0.1 ) was observed under pressure. Simultaneous pressure causes a nonlinear decrease of the SC transition temperature Tc. All these experiments establish the short-range magnetic order as an intrinsic and competing phase in SC T '-Pr1.3 -xLa0.7CexCuO4 (x =0.1 ). The observed pressure effects may be interpreted in terms of the improved nesting conditions through the reduction of the in-plane and out-of-plane lattice constants upon hydrostatic pressure.

  15. Superconductivity in MgB2

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In January of 2001 the superconductivity of the compound MgB2 with a critical temperature Tc of up to 39 K was discovered. This Tc is the highest in all intermetallic compound and alloy superconductors. MgB2 has a simple structure and its manufacturing capital cost is lower, therefore it could become a practical superconductor in the future. The recent progress is reviewed here which covers the progress in electronic structure, high Tc mechanism, superconducting parameters (Debye temperature, specific heat coefficient of electron, critical fields, coherent length, penetration depth, energy gap, critical current and relaxation rate of flux). Moreover the issue on power transmission is discussed.

  16. Prediction of superconductivity in Li-intercalated bilayer phosphorene

    Energy Technology Data Exchange (ETDEWEB)

    Huang, G. Q. [Department of Physics, Nanjing Normal University, Nanjing 210023 (China); National Laboratory of Solid State Microstructures, Nanjing University, Nanjing 210093 (China); Xing, Z. W., E-mail: zwxing@nju.edu.cn [National Laboratory of Solid State Microstructures, Nanjing University, Nanjing 210093 (China); Synergetic Innovation Center of Quantum Information and Quantum Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Xing, D. Y. [National Laboratory of Solid State Microstructures, Nanjing University, Nanjing 210093 (China); Collaborative Innovation Center of Advanced Microstructures and Department of Physics, Nanjing University, Nanjing 210093 (China)

    2015-03-16

    It is shown that bilayer phosphorene can be transformed from a direct-gap semiconductor to a BCS superconductor by intercalating Li atoms. For the Li-intercalated bilayer phosphorene, we find that the electron occupation of Li-derived band is small and superconductivity is intrinsic. With increasing the intercalation of Li atoms, both increased metallicity and strong electron-phonon coupling are favorable for the enhancement of superconductivity. The obtained electron-phonon coupling λ can be larger than 1 and the superconducting temperature T{sub c} can be increased up to 16.5 K, suggesting that phosphorene may be a good candidate for a nanoscale superconductor.

  17. Competing superconducting and magnetic order parameters and field-induced magnetism in electron doped Ba(Fe1-xCox)2As2

    DEFF Research Database (Denmark)

    Larsen, Jacob; Uranga, B. Mencia; Stieber, G.

    2015-01-01

    We have studied the magnetic and superconducting properties of Ba(Fe1-xCox)2As2 as a function of temperature and external magnetic field using neutron scattering and muon spin rotation. Below the superconducting transition temperature the magnetic and superconducting order parameters coexist...

  18. Relativistic electron beams driven by single-cycle laser pulses at kHz repetition rate (Conference Presentation)

    Science.gov (United States)

    Faure, Jérôme; Guénot, Diego; Gustas, Dominykas; Vernier, Aline; Beaurepaire, Benoît; Böhle, Frederik; López-Martens, Rodrigo; Lifschitz, Agustin

    2017-05-01

    Laser-plasma accelerators are usually driven by 100-TW class laser systems with rather low repetition rates. However, recent years have seen the emergence of laser-plasma accelerators operating with kHz lasers and energies lower than 10 mJ. The high repetition-rate is particularly interesting for applications requiring high stability and high signal-to-noise ratio but lower energy electrons. For example, our group recently demonstrated that kHz laser-driven electron beams could be used to capture ultrafast structural dynamics in Silicon nano-membranes via electron diffraction with picosecond resolution. In these first experiments, electrons were injected in the density gradients located at the plasma exit, resulting in rather low energies in the 100 keV range. The electrons being nonrelativistic, the bunch duration quickly becomes picosecond long. Relativistic energies are required to mitigate space charge effects and maintain femtosecond bunches. In this paper, we will show very recent results where electrons are accelerated in laser-driven wakefields to relativistic energies, reaching up to 5 MeV at kHz repetition rate. The electron energy was increased by nearly two orders of magnitude by using single-cycle laser pulses of 3.5 fs, with only 2.5 mJ of energy. Using such short pulses of light allowed us to resonantly excite high amplitude and nonlinear plasma waves at high plasma density, ne=1.5-2×1020 cm-3, in a regime close to the blow-out regime. Electrons had a peaked distribution around 5 MeV, with a relative energy spread of 30 %. Charges in the 100's fC/shot and up to pC/shot where measured depending on plasma density. The electron beam was fairly collimated, 20 mrad divergence at Full Width Half Maximum. The results show remarkable stability of the beam parameters in terms of beam pointing and electron distribution. 3D PIC simulations reproduce the results very well and indicate that electrons are injected by the ionization of Nitrogen atoms, N5+ to N6

  19. Te vacancy-driven superconductivity in orthorhombic molybdenum ditelluride

    Science.gov (United States)

    Cho, Suyeon; Kang, Se Hwang; Yu, Ho Sung; Kim, Hyo Won; Ko, Wonhee; Hwang, Sung Woo; Han, Woo Hyun; Choe, Duk-Hyun; Jung, Young Hwa; Chang, Kee Joo; Lee, Young Hee; Yang, Heejun; Wng Kim, Sung

    2017-06-01

    Two-dimensional (2D) transition metal dichalcogenides (TMDs) have received great attentions because of diverse quantum electronic states such as topological insulating (TI), Weyl semimetallic (WSM) and superconducting states. Recently, the superconducting states emerged in pressurized semimetallic TMDs such as MoTe2 and WTe2 have become one of the central issues due to their predicted WSM states. However, the difficulty in synthetic control of chalcogen vacancies and the ambiguous magneto transport properties have hindered the rigorous study on superconducting and WSM states. Here, we report the emergence of superconductivity at 2.1 K in Te-deficient orthorhombic T d-MoTe2-x with an intrinsic electron-doping, while stoichiometric monoclinic 1T‧-MoTe2 shows no superconducting state down to 10 mK, but exhibits a large magnetoresistance of 32 000% at 2 K in a magnetic field of 14 T originating from nearly perfect compensation of electron and hole carriers. Scanning tunnelling spectroscopy and synchrotron x-ray diffraction combined with theoretical calculations clarify that Te vacancies trigger superconductivity via intrinsic electron doping and the evolution of the T d phase from the 1T‧ phase below 200 K. Unlike the pressure-induced superconducting state of monoclinic MoTe2, this Te vacancy-induced superconductivity is emerged in orthorhombic MoTe2, which is predicted as Weyl semimetal, via electron-doping. This chalcogen vacancy induced-superconductivity provides a new route for cultivating superconducting state together with WSM state in 2D van der Waals materials.

  20. International conference on defects in insulating crystals

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-01

    Short summaries of conference papers are presented. Some of the conference topics included transport properties, defect levels, superionic conductors, radiation effects, John-Teller effect, electron-lattice interactions, and relaxed excited states. (SDF)

  1. High-Temperature Superconductivity

    Science.gov (United States)

    Tanaka, Shoji

    2006-12-01

    A general review on high-temperature superconductivity was made. After prehistoric view and the process of discovery were stated, the special features of high-temperature superconductors were explained from the materials side and the physical properties side. The present status on applications of high-temperature superconductors were explained on superconducting tapes, electric power cables, magnets for maglev trains, electric motors, superconducting quantum interference device (SQUID) and single flux quantum (SFQ) devices and circuits.

  2. Fundamentals of Superconducting Nanoelectronics

    CERN Document Server

    Sidorenko, Anatolie

    2011-01-01

    This book demonstrates how the new phenomena in superconductivity on the nanometer scale (FFLO state, triplet superconductivity, Crossed Andreev Reflection, synchronized generation etc.) serve as the basis for the invention and development of novel nanoelectronic devices and systems. It demonstrates how rather complex ideas and theoretical models, like odd-pairing, non-uniform superconducting state, pi-shift etc., adequately describe the processes in real superconducting nanostructues and novel devices based on them. The book is useful for a broad audience of readers, researchers, engineers, P

  3. Superconductive imaging surface magnetometer

    Science.gov (United States)

    Overton, Jr., William C.; van Hulsteyn, David B.; Flynn, Edward R.

    1991-01-01

    An improved pick-up coil system for use with Superconducting Quantum Interference Device gradiometers and magnetometers involving the use of superconducting plates near conventional pick-up coil arrangements to provide imaging of nearby dipole sources and to deflect environmental magnetic noise away from the pick-up coils. This allows the practice of gradiometry and magnetometry in magnetically unshielded environments. One embodiment uses a hemispherically shaped superconducting plate with interior pick-up coils, allowing brain wave measurements to be made on human patients. another embodiment using flat superconducting plates could be used in non-destructive evaluation of materials.

  4. Superconducting optical modulator

    Science.gov (United States)

    Bunt, Patricia S.; Ference, Thomas G.; Puzey, Kenneth A.; Tanner, David B.; Tache, Nacira; Varhue, Walter J.

    2000-12-01

    An optical modulator based on the physical properties of high temperature superconductors has been fabricated and tested. The modulator was constructed form a film of Yttrium Barium Copper Oxide (YBCO) grown on undoped silicon with a buffer layer of Yttria Stabilized Zirconia. Standard lithographic procedures were used to pattern the superconducting film into a micro bridge. Optical modulation was achieved by passing IR light through the composite structure normal to the micro bridge and switching the superconducting film in the bridge region between the superconducting and non-superconducting states. In the superconducting state, IR light reflects from the superconducting film surface. When a critical current is passed through the micro bridge, it causes the film in this region to switch to the non-superconducting state allowing IR light to pass through it. Superconducting materials have the potential to switch between these two states at speeds up to 1 picosecond using electrical current. Presently, fiber optic transmission capacity is limited by the rate at which optical data can be modulated. The superconducting modulator, when combined with other components, may have the potential to increase the transmission capacity of fiber optic lines.

  5. Basic Study of Superconductive Actuator

    OpenAIRE

    涌井, 和也; 荻原, 宏康

    2000-01-01

    There are two kinds of electromagnetic propulsion ships : a superconductive electromagnetic propulsion ship and a superconductive electricity propulsion ship. A superconductive electromagnetic propulsion ship uses the electromagnetic force (Lorenz force) by the interaction between a magnetic field and a electric current. On the other hand, a superconductive electricity propulsion ship uses screws driven by a superconductive motor. A superconductive propulsion ship technique has the merits of ...

  6. Topological superconductivity in bilayer Rashba system.

    Science.gov (United States)

    Nakosai, Sho; Tanaka, Yukio; Nagaosa, Naoto

    2012-04-06

    We theoretically study a possible topological superconductivity in the interacting two layers of Rashba systems, which can be fabricated by the heterostructures of semiconductors and oxides. The hybridization, which induces the gap in the single particle dispersion, and the electron-electron interaction between the two layers leads to the novel phase diagram of the superconductivity. It is found that the topological superconductivity without breaking time-reversal symmetry is realized when (i) the Fermi energy is within the hybridization gap, and (ii) the interlayer interaction is repulsive, both of which can be satisfied in realistic systems. Edge channels are studied in a tight-binding model numerically, and the several predictions on experiments are also given.

  7. The Superconducting TESLA Cavities

    CERN Document Server

    Aune, B.; Bloess, D.; Bonin, B.; Bosotti, A.; Champion, M.; Crawford, C.; Deppe, G.; Dwersteg, B.; Edwards, D.A.; Edwards, H.T.; Ferrario, M.; Fouaidy, M.; Gall, P-D.; Gamp, A.; Gössel, A.; Graber, J.; Hubert, D.; Hüning, M.; Juillard, M.; Junquera, T.; Kaiser, H.; Kreps, G.; Kuchnir, M.; Lange, R.; Leenen, M.; Liepe, M.; Lilje, L.; Matheisen, A.; Möller, W-D.; Mosnier, A.; Padamsee, H.; Pagani, C.; Pekeler, M.; Peters, H-B.; Peters, O.; Proch, D.; Rehlich, K.; Reschke, D.; Safa, H.; Schilcher, T.; Schmüser, P.; Sekutowicz, J.; Simrock, S.; Singer, W.; Tigner, M.; Trines, D.; Twarowski, K.; Weichert, G.; Weisend, J.; Wojtkiewicz, J.; Wolff, S.; Zapfe, K.

    2000-01-01

    The conceptional design of the proposed linear electron-positron colliderTESLA is based on 9-cell 1.3 GHz superconducting niobium cavities with anaccelerating gradient of Eacc >= 25 MV/m at a quality factor Q0 > 5E+9. Thedesign goal for the cavities of the TESLA Test Facility (TTF) linac was set tothe more moderate value of Eacc >= 15 MV/m. In a first series of 27industrially produced TTF cavities the average gradient at Q0 = 5E+9 wasmeasured to be 20.1 +- 6.2 MV/m, excluding a few cavities suffering fromserious fabrication or material defects. In the second production of 24 TTFcavities additional quality control measures were introduced, in particular aneddy-current scan to eliminate niobium sheets with foreign material inclusionsand stringent prescriptions for carrying out the electron-beam welds. Theaverage gradient of these cavities at Q0 = 5E+9 amounts to 25.0 +- 3.2 MV/mwith the exception of one cavity suffering from a weld defect. Hence only amoderate improvement in production and preparation technique...

  8. Crossover from a pseudogap state to a superconducting state

    Institute of Scientific and Technical Information of China (English)

    Cao Tian-De

    2010-01-01

    This paper deduces that the particular electronic structure of cuprate superconductors confines Cooper pairs to be first formed in the antinodal region which is far from the Fermi surface, and these pairs are incoherent and result in the pseudogap state. With the change of doping or temperature, some pairs are formed in the nodal region which locates the Fermi surface, and these pairs are coherent and lead to superconductivity. Thus the coexistence of the pseudogap and the superconducting gap is explained when the two kinds of gaps are not all on the Fermi surface. It also shows that the symmetry of the pseudogap and the superconducting gap are determined by the electronic structure, and non-s wave symmetry gap favours the high-temperature superconductivity. Why the high-temperature superconductivity occurs in the metal region near the Mott metal-insulator transition is also explained.

  9. Superconductivity and stoichiometry in the BSCCO-family materials

    Energy Technology Data Exchange (ETDEWEB)

    Onellion, M. [Univ. of Wisconsin, Madison, WI (United States)

    1995-08-01

    The author reports on magnetization, c-axis and ab-plane resistivity, critical current, electronic band structure and superconducting gap properties. Bulk measurements and photoemission data were taken on similar samples.

  10. Is There a Metamaterial Route to High Temperature Superconductivity?

    Directory of Open Access Journals (Sweden)

    Igor I. Smolyaninov

    2014-01-01

    Full Text Available Superconducting properties of a material such as electron-electron interactions and the critical temperature of superconducting transition can be expressed via the effective dielectric response function εeff (q,ω of the material. Such a description is valid on the spatial scales below the superconducting coherence length (the size of the Cooper pair, which equals ∼100 nm in a typical BCS superconductor. Searching for natural materials exhibiting larger electron-electron interactions constitutes a traditional approach to high temperature superconductivity research. Here we point out that recently developed field of electromagnetic metamaterials deals with somewhat related task of dielectric response engineering on sub-100 nm scale. We argue that the metamaterial approach to dielectric response engineering may considerably increase the critical temperature of a composite superconductor-dielectric metamaterial.

  11. Superconductivity as the effect of Bose-Einstein condensation and the relationship of superconductor critical temperature and its electronic specific heat

    CERN Document Server

    Vasiliev, B V

    2011-01-01

    It is shown that the temperature dependence of the value of energy gap in superconductors is characteristic for the order-disorder transition. The obtained relationship between the critical temperature and the critical magnetic field of the Bose-Einstein condensate of electrically charged particles is in accordance with measurement data of superconductors. On this base the relation of the critical temperature of the superconductor and its Sommerfeld constant is obtained, i.e. is found the dependence for critical temperature and the Fermi energy of I-type superconductors. The estimation of properties of II-type superconductors reveals a somewhat different relation of critical temperature and Fermi energy. Among the high-temperature superconducting ceramics there are the both - I and II - types superconductors.

  12. Using the TOF method to measure the electron lifetime in long-drift CdZnTe detectors (Conference Presentation)

    Science.gov (United States)

    Bolotnikov, Aleksey E.; Camarda, Giuseppe S.; Chen, Eric; Cui, Yonggang; Gul, Rubi; Dedic, Václav; De Geronimo, Gianluigi; Fried, Jack; Hossain, Anwar; MacKenzie, Jason M.; Sellin, Paul; Taherion, Saeid; Vernon, Emerson; Yang, Ge; El-hanany, Uri; James, Ralph B.

    2016-09-01

    The traditional method for electron lifetime measurements of CdZnTe (CZT) detectors relies on using the Hecht equation. The procedure involves measuring the dependence of the detector response on the applied bias and applying the Hecht equation to evaluate the mu-tau product, which in turn can be converted into the carrier lifetime if the mobility is known. Despite general acceptance of this technique, which is very convenient for comparative testing of different CZT materials, the assumption of a constant electric field inside a detector is unjustified. In the Hecht equation, this assumption means that the drift time would be a linear function of the drift distance. This condition is rarely fulfilled in practice at low applied biases where the Hecht equation is most sensitive to the mu-tau product. As a result, researchers usually take measurements at relatively high biases, which work well in the case of the low mu-tau material, Technologies. The TOF-based techniques are traditionally used for monitoring the electronegative impurity concentrations in noble gas detectors by measuring the electron lifetimes. We found the electron mu-tau product of tested crystals is in the range 0.1-0.2 cm2/V, which is an order of the magnitude higher than any value previously reported for CZT material. In this work, we reported the measurement procedure and the results. We will also discuss the applicability criteria of the Hecht equation for measuring the electron lifetime in high mu-tau product CZT.

  13. Ballistic superconductivity in semiconductor nanowires

    Science.gov (United States)

    Zhang, Hao; Gül, Önder; Conesa-Boj, Sonia; Nowak, Michał P.; Wimmer, Michael; Zuo, Kun; Mourik, Vincent; de Vries, Folkert K.; van Veen, Jasper; de Moor, Michiel W. A.; Bommer, Jouri D. S.; van Woerkom, David J.; Car, Diana; Plissard, Sébastien R.; Bakkers, Erik P. A. M.; Quintero-Pérez, Marina; Cassidy, Maja C.; Koelling, Sebastian; Goswami, Srijit; Watanabe, Kenji; Taniguchi, Takashi; Kouwenhoven, Leo P.

    2017-07-01

    Semiconductor nanowires have opened new research avenues in quantum transport owing to their confined geometry and electrostatic tunability. They have offered an exceptional testbed for superconductivity, leading to the realization of hybrid systems combining the macroscopic quantum properties of superconductors with the possibility to control charges down to a single electron. These advances brought semiconductor nanowires to the forefront of efforts to realize topological superconductivity and Majorana modes. A prime challenge to benefit from the topological properties of Majoranas is to reduce the disorder in hybrid nanowire devices. Here we show ballistic superconductivity in InSb semiconductor nanowires. Our structural and chemical analyses demonstrate a high-quality interface between the nanowire and a NbTiN superconductor that enables ballistic transport. This is manifested by a quantized conductance for normal carriers, a strongly enhanced conductance for Andreev-reflecting carriers, and an induced hard gap with a significantly reduced density of states. These results pave the way for disorder-free Majorana devices.

  14. Oxide-based platform for reconfigurable superconducting nanoelectronics

    Science.gov (United States)

    Veazey, Joshua P.; Cheng, Guanglei; Irvin, Patrick; Cen, Cheng; Bogorin, Daniela F.; Bi, Feng; Huang, Mengchen; Bark, Chung-Wung; Ryu, Sangwoo; Cho, Kwang-Hwan; Eom, Chang-Beom; Levy, Jeremy

    2013-09-01

    We report quasi-1D superconductivity at the interface of LaAlO3 and SrTiO3. The material system and nanostructure fabrication method supply a new platform for superconducting nanoelectronics. Nanostructures having line widths w ˜ 10 nm are formed from the parent two-dimensional electron liquid using conductive atomic force microscope lithography. Nanowire cross-sections are small compared to the superconducting coherence length in LaAlO3/SrTiO3, placing them in the quasi-1D regime. Broad superconducting transitions versus temperature and finite resistances in the superconducting state well below Tc ≈ 200 mK are observed, suggesting the presence of fluctuation- and heating-induced resistance. The superconducting resistances and V-I characteristics are tunable through the use of a back gate. Four-terminal resistances in the superconducting state show an unusual dependence on the current path, varying by as much as an order of magnitude. This new technology, i.e., the ability to ‘write’ gate-tunable superconducting nanostructures on an insulating LaAlO3/SrTiO3 ‘canvas’, opens possibilities for the development of new families of reconfigurable superconducting nanoelectronics.

  15. Graphene: Carbon's superconducting footprint

    Science.gov (United States)

    Vafek, Oskar

    2012-02-01

    Graphene exhibits many extraordinary properties, but superconductivity isn't one of them. Two theoretical studies suggest that by decorating the surface of graphene with the right species of dopant atoms, or by using ionic liquid gating, superconductivity could yet be induced.

  16. Academic training: Applied superconductivity

    CERN Multimedia

    2007-01-01

    LECTURE SERIES 17, 18, 19 January from 11.00 to 12.00 hrs Council Room, Bldg 503 Applied Superconductivity : Theory, superconducting Materials and applications E. PALMIERI/INFN, Padova, Italy When hearing about persistent currents recirculating for several years in a superconducting loop without any appreciable decay, one realizes that we are dealing with a phenomenon which in nature is the closest known to the perpetual motion. Zero resistivity and perfect diamagnetism in Mercury at 4.2 K, the breakthrough during 75 years of several hundreds of superconducting materials, the revolution of the "liquid Nitrogen superconductivity"; the discovery of still a binary compound becoming superconducting at 40 K and the subsequent re-exploration of the already known superconducting materials: Nature discloses drop by drop its intimate secrets and nobody can exclude that the last final surprise must still come. After an overview of phenomenology and basic theory of superconductivity, the lectures for this a...

  17. Anharmonic phonons and high-temperature superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Crespi, V.H.; Cohen, M.L. (Department of Physics, University of California at Berkeley, and Materials Sciences Division, Lawrence Berkeley Laboratory, Berkeley, California 94720 (United States))

    1993-07-01

    We examine a simple model of anharmonic phonons with application to the superconducting isotope effect. Linear and quadratic electron-phonon coupling are considered for various model potentials. The results of the model calculations are compared with the high-temperature superconductors La[sub 2[minus][ital x

  18. Unconventional high-Tc superconductivity in fullerides.

    Science.gov (United States)

    Takabayashi, Yasuhiro; Prassides, Kosmas

    2016-09-13

    A3C60 molecular superconductors share a common electronic phase diagram with unconventional high-temperature superconductors such as the cuprates: superconductivity emerges from an antiferromagnetic strongly correlated Mott-insulating state upon tuning a parameter such as pressure (bandwidth control) accompanied by a dome-shaped dependence of the critical temperature, Tc However, unlike atom-based superconductors, the parent state from which superconductivity emerges solely by changing an electronic parameter-the overlap between the outer wave functions of the constituent molecules-is controlled by the C60 (3-) molecular electronic structure via the on-molecule Jahn-Teller effect influence of molecular geometry and spin state. Destruction of the parent Mott-Jahn-Teller state through chemical or physical pressurization yields an unconventional Jahn-Teller metal, where quasi-localized and itinerant electron behaviours coexist. Localized features gradually disappear with lattice contraction and conventional Fermi liquid behaviour is recovered. The nature of the underlying (correlated versus weak-coupling Bardeen-Cooper-Schrieffer theory) s-wave superconducting states mirrors the unconventional/conventional metal dichotomy: the highest superconducting critical temperature occurs at the crossover between Jahn-Teller and Fermi liquid metal when the Jahn-Teller distortion melts.This article is part of the themed issue 'Fullerenes: past, present and future, celebrating the 30th anniversary of Buckminster Fullerene'.

  19. Superconductivity in carbon nanomaterials

    Science.gov (United States)

    Dlugon, Katarzyna

    The purpose of this thesis is to explain the phenomenon of superconductivity in carbon nanomaterials such as graphene, fullerenes and carbon nanotubes. In the introductory chapter, there is a description of superconductivity and how it occurs at critical temperature (Tc) that is characteristic and different to every superconducting material. The discovery of superconductivity in mercury in 1911 by Dutch physicist Heike Kamerlingh Onnes is also mentioned. Different types of superconductors, type I and type II, low and high temperatures superconductors, as well as the BCS theory that was developed in 1957 by Bardeen, Cooper, and Schrieffer, are also described in detail. The BCS theory explains how Cooper's pairs are formed and how they are responsible for the superconducting properties of many materials. The following chapters explain superconductivity in doped fullerenes, graphene and carbon nanotubes, respectively. There is a thorough explanation followed by many examples of different types of carbon nanomaterials in which small changes in chemical structure cause significant changes in superconducting properties. The goal of this research was not only to take into consideration well known carbon based superconductors but also to search for the newest available materials such as the fullerene nanowhiskers discovered quite recently. There is also a presentation of fairly new ideas about inducing superconductivity in a monolayer of graphene which is more challenging than inducing superconductivity in graphite by simply intercalating metal atoms between its graphene sheets. An effort has been taken to look for any available information about carbon nanomaterials that have the potential to superconduct at room temperature, mainly because discovery of such materials would be a real revolution in the modern world, although no such materials have been discovered yet.

  20. Quantum Memristors with Superconducting Circuits

    Science.gov (United States)

    Salmilehto, J.; Deppe, F.; di Ventra, M.; Sanz, M.; Solano, E.

    2017-02-01

    Memristors are resistive elements retaining information of their past dynamics. They have garnered substantial interest due to their potential for representing a paradigm change in electronics, information processing and unconventional computing. Given the advent of quantum technologies, a design for a quantum memristor with superconducting circuits may be envisaged. Along these lines, we introduce such a quantum device whose memristive behavior arises from quasiparticle-induced tunneling when supercurrents are cancelled. For realistic parameters, we find that the relevant hysteretic behavior may be observed using current state-of-the-art measurements of the phase-driven tunneling current. Finally, we develop suitable methods to quantify memory retention in the system.

  1. Quantum Memristors with Superconducting Circuits

    Science.gov (United States)

    Salmilehto, J.; Deppe, F.; Di Ventra, M.; Sanz, M.; Solano, E.

    2017-01-01

    Memristors are resistive elements retaining information of their past dynamics. They have garnered substantial interest due to their potential for representing a paradigm change in electronics, information processing and unconventional computing. Given the advent of quantum technologies, a design for a quantum memristor with superconducting circuits may be envisaged. Along these lines, we introduce such a quantum device whose memristive behavior arises from quasiparticle-induced tunneling when supercurrents are cancelled. For realistic parameters, we find that the relevant hysteretic behavior may be observed using current state-of-the-art measurements of the phase-driven tunneling current. Finally, we develop suitable methods to quantify memory retention in the system. PMID:28195193

  2. Superconductivity in single wall carbon nanotubes

    Directory of Open Access Journals (Sweden)

    H Yavari

    2009-08-01

    Full Text Available   By using Greens function method we first show that the effective interaction between two electrons mediated by plasmon exchange can become attractive which in turn can lead to superconductivity at a high critical temperature in a singl wall carbon nanotubes (SWCNT. The superconducting transition temperature Tc for the SWCNT (3,3 obtained by this mechanism agrees with the recent experimental result. We also show as the radius of SWCNT increases, plasmon frequency becomes lower and leads to lower Tc.

  3. Synthesis of Bulk Superconducting Magnesium Diboride

    Directory of Open Access Journals (Sweden)

    Margie Olbinado

    2002-06-01

    Full Text Available Bulk polycrystalline superconducting magnesium diboride, MgB2, samples were successfully prepared via a one-step sintering program at 750°C, in pre Argon with a pressure of 1atm. Both electrical resistivity and magnetic susceptibility measurements confirmed the superconductivity of the material at 39K, with a transition width of 5K. The polycrystalline nature, granular morphology, and composition of the sintered bulk material were confirmed using X-ray diffractometry (XRD, scanning electron microscopy (SEM, and energy dispersive X-ray analysis (EDX.

  4. Annual Gaseous Electronics Conference (38th) Held at Monterey, California on 15-18 October 1985. Program and Abstracts.

    Science.gov (United States)

    1985-10-18

    U. of Bar, J. Bretagne , Internat’l Co U. de Paris-Sud, M. Bacal, Ecole Poly- technique, France TUESDAY AFTERNOON, 15 OCTOBER CA-11 ELECTRON...Chem. Phys., 73, 99 CA-10 Vibrational excitation in magnet" multicusp H2 discharges. C. GORSE, M. CAPITELLIP University of Bari, J. BRETAGNE ...il BRATES, N., DB-4 ESKIN, L.D., CB-8, CB-9 BRETAGNE , J., CA-1O BURROW, P.D., DA-3, DA-4 F C FALCONE, R., B-3 FERGUSON, E.E., EA-i CALEDONIA, G.E

  5. Nostradamus conference

    CERN Document Server

    Rössler, Otto; Snášel, Václav; Abraham, Ajith; Corchado, Emilio; Nostradamus: Modern Methods of Prediction, Modeling and Analysis of Nonlinear Systems

    2013-01-01

    This proceeding book of Nostradamus conference (http://nostradamus-conference.org) contains accepted papers presented at this event in 2012. Nostradamus conference was held in the one of the biggest and historic city of Ostrava (the Czech Republic, http://www.ostrava.cz/en), in September 2012. Conference topics are focused on classical as well as modern methods for prediction of dynamical systems with applications in science, engineering and economy. Topics are (but not limited to): prediction by classical and novel methods, predictive control, deterministic chaos and its control, complex systems, modelling and prediction of its dynamics and much more.

  6. High-quality electron beam generation and bright betatron radiation from a cascaded laser wakefield accelerator (Conference Presentation)

    Science.gov (United States)

    Liu, Jiansheng; Wang, Wentao; Li, Wentao; Qi, Rong; Zhang, Zhijun; Yu, Changhai; Wang, Cheng; Liu, Jiaqi; Qing, Zhiyong; Ming, Fang; Xu, Yi; Leng, Yuxin; Li, Ruxin; Xu, Zhizhan

    2017-05-01

    One of the major goals of developing laser wakefiled accelerators (LWFAs) is to produce compact high-energy electron beam (e-beam) sources, which are expected to be applied in developing compact x-ray free-electron lasers and monoenergetic gamma-ray sources. Although LWFAs have been demonstrated to generate multi-GeV e-beams, to date they are still failed to produce high quality e beams with several essential properties (narrow energy spread, small transverse emittance and high beam charge) achieved simultaneously. Here we report on the demonstration of a high-quality cascaded LWFA experimentally via manipulating electron injection, seeding in different periods of the wakefield, as well as controlling energy chirp for the compression of energy spread. The cascaded LWFA was powered by a 1-Hz 200-TW femtosecond laser facility at SIOM. High-brightness e beams with peak energies in the range of 200-600 MeV, 0.4-1.2% rms energy spread, 10-80 pC charge, and 0.2 mrad rms divergence are experimentally obtained. Unprecedentedly high 6-dimensional (6-D) brightness B6D,n in units of A/m2/0.1% was estimated at the level of 1015-16, which is very close to the typical brightness of e beams from state-of-the-art linac drivers and several-fold higher than those of previously reported LWFAs. Furthermore, we propose a scheme to minimize the energy spread of an e beam in a cascaded LWFA to the one-thousandth-level by inserting a stage to compress its longitudinal spatial distribution via velocity bunching. In this scheme, three-segment plasma stages are designed for electron injection, e-beam length compression, and e-beam acceleration, respectively. A one-dimensional theory and two-dimensional particle-in-cell simulations have demonstrated this scheme and an e beam with 0.2% rms energy spread and low transverse emittance could be generated without loss of charge. Based on the high-quality e beams generated in the LWFA, we have experimentally realized a new scheme to enhance the

  7. 2013 APPLEPIES Conference

    CERN Document Server

    2014-01-01

    This book provides a thorough overview of cutting-edge research on electronics applications relevant to industry, the environment, and society at large. A wide spectrum of application domains are covered, from automotive to space and from health to security, and special attention is devoted to the use of embedded devices and sensors for imaging, communication, and control. The book is based on the 2013 APPLEPIES Conference, held in Rome, which brought together researchers and stakeholders to consider the most significant current trends in the field of applied electronics and to debate visions for the future. Areas covered by the conference included information communication technology; biotechnology and biomedical imaging; space; secure, clean, and efficient energy; the environment; and smart, green, and integrated transport. As electronics technology continues to develop apace, constantly meeting previously unthinkable targets, further attention needs to be directed toward the electronics applications and th...

  8. Electron-Phonon Anomaly Related to Charge Stripes: Static Stripe Phase Versus Optimally Doped Superconducting La1.85Sr0.15CuO4

    Science.gov (United States)

    Reznik, D.; Pintschovius, L.; Fujita, M.; Yamada, K.; Gu, G. D.; Tranquada, J. M.

    2007-05-01

    Inelastic neutron scattering was used to study the Cu-O bond-stretching vibrations in optimally doped La1.85Sr0.15CuO4 (Tc = 35 K) and in two other cuprates showing static stripe order at low temperatures, i.e. La1.48Nd0.4Sr0.12CuO4 and La1.875Ba0.125CuO4. All three compounds exhibit a very similar phonon anomaly, which is not predicted by conventional band theory. It is argued that the phonon anomaly reflects a coupling to charge inhomogeneities in the form of stripes, which remain dynamic in superconducting La1.85Sr0.15CuO4 down to the lowest temperatures. These results show that the phonon effect indicating stripe formation is not restricted to a narrow region of the phase diagram around the so-called 1/8 anomaly but occurs in optimally doped samples as well.

  9. Effect of electron irradiation on superconductivity in single crystals of Ba(Fe{sub 1-x}Ru{sub x}){sub 2}As{sub 2} (x =0.24).

    Energy Technology Data Exchange (ETDEWEB)

    Prozorov, R.; Konczykowski, M.; Tanatar, M. A.; Thaler, A.; Bud' ko, S. L.; Canfield, P. C.; Mishra, V.; Hirschfeld, P. J.

    2014-11-18

    A single crystal of isovalently substituted Ba(Fe1-xRux)2As2 (x = 0.24) was sequentially irradi- ated with 2.5 MeV electrons up to a maximum dose of 2.1 × 1019 ¯e/cm2. The electrical resistivity was measured in - situ at T = 22 K during the irradiation and ex - situ as a function of temperature between subsequent irradiation runs. Upon irradiation, the superconducting transition temperature, Tc , decreases and the residual resistivity, ρ0, increases. We find that electron irradiation leads to the fastest suppression of Tc compared to other types of artificially introduced disorder, probably due to the strong short-range potential of the point-like irradiation defects. A more detailed analysis within a multiband scenario with variable scattering potential strength shows that the observed Tc vs. ρ0 is fully compatible with s± pairing, in contrast to earlier claims that this model leads to a too rapid a suppression of Tc with scattering.

  10. Antiferromagnetic spin wave and the superconductivity

    Science.gov (United States)

    Koh, Shun-ichiro

    2000-07-01

    The neutron scattering of UPd 2Al 3 showed that a sharp peak, which is absent in the normal phase, appears in the superconducting phase (Metoki et al., J. Phys. Soc. Japan 66 (1997) 2560; Bernhoeft et al., Phys. Rev. Lett. 81 (1998) 4244). Assuming this excitation to be an antiferromagnetic (AFM) spin-wave, this paper deals with its enhancement by the superconductivity. Applying the slave-boson formalism, we consider the AFM ordering as a spin-density-wave (Koh, Phys. Lett. A 253 (1999) 98). Above Tc, the spin-wave suffers an energy dissipation due to the conduction electron. Below Tc, the superconductivity suppresses the dissipation, resulting in the growth of the AFM spin-wave.

  11. Electromagnetic radiation of superconducting cosmic strings

    Science.gov (United States)

    Rogozin, D. A.; Zadorozhna, L. V.

    2013-12-01

    Cosmic strings are relics of the early Universe which can be formed during the phase transitions of fields with spontaneously broken symmetry in the early Universe. Their existence finds support in modern superstrings theories, both in compactification models and in theories with extended additional dimensions. Strings can hold currents, effectively become electrically superconducting wires of astrophysical dimensions. Superconducting cosmic strings can serve as powerful sources of non-thermal radiation in wide energy range. Mechanisms of radiation are synchrotron, synchrotron self-Compton and inverse-Compton on CMB photons radiation of electrons accelerated by bow shock wave, created by magnetosphere of relativistically moving string in intergalactic medium (IGM). Expected fluxes of radiation from the shocked plasma around superconducting cosmic strings are calculated for strings with various tensions and for different cases of their location. Possibilities of strings detection by existing facilities are estimated.

  12. Nonlocal transport in superconducting oxide nanostructures

    Science.gov (United States)

    Veazey, Joshua; Cheng, Guanglei; Lu, Shicheng; Tomczyk, Michelle; Irvin, Patrick; Huang, Mengchen; Wung Bark, Chung; Ryu, Sangwoo; Eom, Chang-Beom; Levy, Jeremy

    2013-03-01

    We report nonlocal transport signatures in the superconducting state of nanostructures formed[2] at the LaAlO3/SrTiO3 interface using conductive AFM lithography. Nonlocal resistances (nonlocal voltage divided by current) are as large as 200 Ω when 2-10 μm separate the current-carrying segments from the voltage-sensing leads. The nonlocal resistance reverses sign at the local critical current of the superconducting state. Features observed in the nonlocal V-I curves evolve with back gate voltage and magnetic field, and are correlated with the local four-terminal V-I curves. We discuss how nonlocal and local transport effects in LaAlO3/SrTiO3 nanostructures may result from the electronic phase separation and superconducting inhomogeneity reported by others in planar structures[3]. This work is supported by AFOSR (FA9550-10-1-0524) and NSF DMR-0906443

  13. The superconducting spin valve and triplet superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Garifullin, I.A., E-mail: ilgiz_garifullin@yahoo.com [Zavoisky Physical-Technical Institute, Kazan Scientific Center of Russian Academy of Sciences, 420029 Kazan (Russian Federation); Leksin, P.V.; Garif' yanov, N.N.; Kamashev, A.A. [Zavoisky Physical-Technical Institute, Kazan Scientific Center of Russian Academy of Sciences, 420029 Kazan (Russian Federation); Fominov, Ya.V. [L. D. Landau Institute for Theoretical Physics RAS, 119334 Moscow (Russian Federation); Moscow Institute of Physics and Technology, 141700 Dolgoprudny (Russian Federation); Schumann, J.; Krupskaya, Y.; Kataev, V.; Schmidt, O.G. [Leibniz Institute for Solid State and Materials Research IFW Dresden, D-01171 Dresden (Germany); Büchner, B. [Leibniz Institute for Solid State and Materials Research IFW Dresden, D-01171 Dresden (Germany); Institut für Festkörperphysik, Technische Universität Dresden, D-01062 Dresden (Germany)

    2015-01-01

    A review of our recent results on the spin valve effect is presented. We have used a theoretically proposed spin switch design F1/F2/S comprising a ferromagnetic bilayer (F1/F2) as a ferromagnetic component, and an ordinary superconductor (S) as the second interface component. Based on it we have prepared and studied in detail a set of multilayers CoO{sub x}/Fe1/Cu/Fe2/S (S=In or Pb). In these heterostructures we have realized for the first time a full spin switch effect for the superconducting current, have observed its sign-changing oscillating behavior as a function of the Fe2-layer thickness and finally have obtained direct evidence for the long-range triplet superconductivity arising due to noncollinearity of the magnetizations of the Fe1 and Fe2 layers. - Highlights: • We studied a spin switch design F1/F2/S. • We prepared a set of multilayers CoOx/Fe1/Cu/Fe2/S (S=In or Pb). • The full spin switch effect for the superconducting current was realized. • We observed its oscillating behavior as a function of the Fe2-layer thickness. • We obtained direct evidence for the long-range triplet superconductivity.

  14. Proc. of the workshop on pushing the limits of RF superconductivity.

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K-J., Eyberger, C., editors

    2005-04-13

    For three days in late September last year, some sixty experts in RF superconductivity from around the world came together at Argonne to discuss how to push the limits of RF superconductivity for particle accelerators. It was an intense workshop with in-depth presentations and ample discussions. There was added excitement due to the fact that, a few days before the workshop, the International Technology Recommendation Panel had decided in favor of superconducting technology for the International Linear Collider (ILC), the next major high-energy physics accelerator project. Superconducting RF technology is also important for other large accelerator projects that are either imminent or under active discussion at this time, such as the Rare Isotope Accelerator (RIA) for nuclear physics, energy recovery linacs (ERLs), and x-ray free-electron lasers. For these accelerators, the capability in maximum accelerating gradient and/or the Q value is essential to limit the length and/or operating cost of the accelerators. The technological progress of superconducting accelerators during the past two decades has been truly remarkable, both in low-frequency structures for acceleration of protons and ions as well as in high-frequency structures for electrons. The requirements of future accelerators demand an even higher level of performance. The topics of this workshop are therefore highly relevant and timely. The presentations given at the workshop contained authoritative reviews of the current state of the art as well as some original materials that previously had not been widely circulated. We therefore felt strongly that these materials should be put together in the form of a workshop proceeding. The outcome is this report, which consists of two parts: first, a collection of the scholarly papers prepared by some of the participants and second, copies of the viewgraphs of all presentations. The presentation viewgraphs, in full color, are also available from the Workshop

  15. Summer Course on the Science and Technology of Superconductivity

    CERN Document Server

    Gregory, W D; Mathews, W N; The science and technology of superconductivity

    1973-01-01

    Since the discovery of superconductivity in 1911 by H. Kamerlingh Onnes, of the order of half a billion dollars has been spent on research directed toward understanding and utiliz­ ing this phenomenon. This investment has gained us fundamental understanding in the form of a microscopic theory of superconduc­ tivity. Moreover, superconductivity has been transformed from a laboratory curiosity to the basis of some of the most sensitive and accurate measuring devices known, a whole host of other elec­ tronic devices, a soon-to-be new international standard for the volt, a prototype generation of superconducting motors and gener­ ators, and magnets producing the highest continuous magnetic fields yet produced by man. The promise of more efficient means of power transmission and mass transportation, a new generation of superconducting motors and generators, and computers and other electronic devices with superconducting circuit elements is all too clear. The realization of controlled thermonuclear fu...

  16. Tunneling in superconducting structures

    Science.gov (United States)

    Shukrinov, Yu. M.

    2010-12-01

    Here we review our results on the breakpoint features in the coupled system of IJJ obtained in the framework of the capacitively coupled Josephson junction model with diffusion current. A correspondence between the features in the current voltage characteristics (CVC) and the character of the charge oscillations in superconducting layers is demonstrated. Investigation of the correlations of superconducting currents in neighboring Josephson junctions and the charge correlations in neighboring superconducting layers reproduces the features in the CVC and gives a powerful method for the analysis of the CVC of coupled Josephson junctions. A new method for determination of the dissipation parameter is suggested.

  17. Superconductivity in doped insulators

    Energy Technology Data Exchange (ETDEWEB)

    Emery, V.J. [Brookhaven National Lab., Upton, NY (United States); Kivelson, S.A. [California Univ., Los Angeles, CA (United States). Dept. of Physics

    1995-12-31

    It is shown that many synthetic metals, including high temperature superconductors are ``bad metals``, with such a poor conductivity that the usual meanfield theory of superconductivity breaks down because of anomalously large classical and quantum fluctuations of the phase of the superconducting order parameter. It is argued that the supression of a first order phase transition (phase separation) by the long-range Coulomb interaction leads to high temperature superconductivity accompanied by static or dynamical charge inhomogeneIty. Evidence in support of this picture for high temperature superconductors is described.

  18. 电子束退火制备二硼化镁超导薄膜的可行性研究%Feasibility Study on Growth of Superconducting Magnesium Diboride Films by Electron Beam Annealing

    Institute of Scientific and Technical Information of China (English)

    孔祥东; 戴倩; 韩立; 冯庆荣; 初明璋; 薛虹; 李建国

    2012-01-01

    提出了电子束退火制备MgB2超导薄膜新工艺.在对电子束退火制备MgB2超导薄膜可行性进行理论研究的基础上,使用EBW-6型电子束热处理设备,在真空度5.0×10-3 Pa、加速电压40kV、束流2mA、束斑14.2 mm、退火时间1.5s的条件下对[B(10 nm)/Mg(15 nm)]4/SiC夹层结构前驱膜进行了退火实验,得到了零电阻温度为30.3 K、转变宽度△Tc为0.4K、临界电流密度(SK、0 T)为5.0×106 A/cm2、表面平整的MgB2超导薄膜.证明了电子束退火制备MgB2薄膜是切实可行的.该工艺可以推广到大面积MgB2超导薄膜和MgB2线带材的制备.%Here, we addressed the feasibility of depositing the superconducting MgB2 thin films by electron beam annealing. Based on the theoretical simulation, the MgB2 thin films were grown. In the newly-developed technique,the precursor films,with a multilayered structure of [B(10 nm)/Mg(15 nm)]4/SiC were annealed by ex situ electron beam an- nealing,in the lab-built, electron-beam heating set-up, under the following conditions: a pressure of 5.0 × 10" Pa, an electron beam accelerating voltage of 40 × 103 V, a beam current of 2×103A,a beam diameter of 14.2 mm, and an annealing time for 1.5 s. The microstructures and phase structures of the electron beam annealed films were characterized with X-ray diffraction, scanning electron microscopy, and atomic force microscopy . The results show that the fairly smooth and compact MgR2 films display good superconducting properties, including a zero-resistance temperature ~ 30.3 K, a transition width △Tc ~ 0.4 K,and a critical current density of Jc(5 K,0 T) ~ 5.0 × 106 A/cm2. We suggest that it be feasibly to fabricate large-area MgB2 films,as well as MgB2 wires and MgB2 tapes,by electron beam annealing.

  19. Consensus conferences

    DEFF Research Database (Denmark)

    Nielsen, Annika Porsborg; Lassen, Jesper

    Our results point to significant national variation both in terms of the perceived aim of consensus conferences, expectations to conference outcomes, conceptions of the roles of lay people and experts, and in terms of the way in which the role of public deliberation is interpreted. Interestingly...

  20. Superconducting wind turbine generators

    DEFF Research Database (Denmark)

    Abrahamsen, Asger Bech; Mijatovic, Nenad; Seiler, Eugen

    2010-01-01

    , the main challenge of the superconducting direct drive technology is to prove that the reliability is superior to the alternative drive trains based on gearboxes or permanent magnets. A strategy of successive testing of superconducting direct drive trains in real wind turbines of 10 kW, 100 kW, 1 MW and 10...... offshore turbines of 8 and 10 MW have been determined from an up-scaling of an existing 5 MW turbine and the necessary properties of the superconducting drive train are discussed. We have found that the absence of the gear box is the main benefit and the reduced weight and size is secondary. However...... MW generator and it is concluded that the present production capacity of coated conductors must be increased by a factor of 36 by 2020, resulting in a ten times lower price of the tape in order to reach a realistic price level for the superconducting drive train....

  1. Magnetic and superconducting nanowires

    DEFF Research Database (Denmark)

    Piraux, L.; Encinas, A.; Vila, L.

    2005-01-01

    magnetic and superconducting nanowires. Using different approaches entailing measurements on both single wires and arrays, numerous interesting physical properties have been identified in relation to the nanoscopic dimensions of these materials. Finally, various novel applications of the nanowires are also...

  2. Superconductivity fundamentals and applications

    CERN Document Server

    Buckel, Werner

    2004-01-01

    This is the second English edition of what has become one of the definitive works on superconductivity in German -- currently in its sixth edition. Comprehensive and easy to understand, this introductory text is written especially with the non-specialist in mind. The authors, both long-term experts in this field, present the fundamental considerations without the need for extensive mathematics, describing the various phenomena connected with the superconducting state, with liberal insertion of experimental facts and examples for modern applications. While all fields of superconducting phenomena are dealt with in detail, this new edition pays particular attention to the groundbreaking discovery of magnesium diboride and the current developments in this field. In addition, a new chapter provides an overview of the elements, alloys and compounds where superconductivity has been observed in experiments, together with their major characteristics. The chapter on technical applications has been considerably expanded...

  3. Process design kit and circuits at a 2 µm technology node for flexible wearable electronics applications (Conference Presentation)

    Science.gov (United States)

    Torres-Miranda, Miguel; Petritz, Andreas; Gold, Herbert; Stadlober, Barbara

    2016-09-01

    In this work we present our most advanced technology node of organic thin film transistors (OTFTs) manufactured with a channel length as short as 2 μm by contact photolithography and a self-alignment process directly on a plastic substrate. Our process design kit (PDK) is described with P-type transistors, capacitors and 3 metal layers for connections of complex circuits. The OTFTs are composed of a double dielectric layer with a photopatternable ultra thin polymer (PNDPE) and alumina, with a thickness on the order of 100 nm. The organic semiconductor is either Pentacene or DNTT, which have a stable average mobility up to 0.1 cm2/Vs. Finally, a polymer (e.g.: Parylene-C) is used as a passivation layer. We describe also our design rules for the placement of standard circuit cells. A "plastic wafer" is fabricated containing 49 dies. Each die of 1 cm2 has between 25 to 50 devices, proving larger scale integration in such a small space, unique in organic technologies. Finally, we present the design (by simulations using a Spice model for OTFTs) and the test of analog and digital basic circuits: amplifiers with DC gains of about 20 dB, comparators, inverters and logic gates working in the frequency range of 1-10 kHz. These standard circuit cells could be used for signal conditioning and integrated as active matrices for flexible sensors from 3rd party institutions, thus opening our fab to new ideas and sophisticated pre-industrial low cost applications for the emerging fields of biomedical devices and wearable electronics for virtual/augmented reality.

  4. Superconductivity and symmetry breaking

    Energy Technology Data Exchange (ETDEWEB)

    Sarasua, L.G., E-mail: sarasua@fisica.edu.uy [Instituto de Fisica, Facultad de Ciencias, Universidad de la Republica, Montevideo (Uruguay)

    2012-02-15

    In the present work we consider the relation between superconductivity and spontaneous gauge symmetry breaking (SGBS). We show that ODLRO does not require in principle SBGS, even in the presence of particle number fluctuations, by examining exact solutions of a fermionic pairing model. The criteria become equivalent if a symmetry breaking field is allowed, which can be attributed to the interaction with the environment. However, superconducting states without SBGS are not forbidden.

  5. Photoemission, Correlation and Superconductivity:

    Science.gov (United States)

    Abrecht, M.; Ariosa, D.; Cloëtta, D.; Pavuna, D.; Perfetti, L.; Grioni, M.; Margaritondo, G.

    We review some of the problems still affecting photoemission as a probe of high-temperature superconductivity, as well as important recent results concerning their solution. We show, in particular, some of the first important results on thin epitaxial films grown by laser ablation, which break the monopoly of cleaved BCSCO in this type of experiments. Such results, obtained on thin LSCO, may have general implications on the theory of high-temperature superconductivity.

  6. Emergent Higgsless Superconductivity

    Directory of Open Access Journals (Sweden)

    Cristina Diamantini M.

    2017-01-01

    Full Text Available We present a new Higgsless model of superconductivity, inspired from anyon superconductivity but P- and T-invariant and generalizable to any dimension. While the original anyon superconductivity mechanism was based on incompressible quantum Hall fluids as average field states, our mechanism involves topological insulators as average field states. In D space dimensions it involves a (D-1-form fictitious pseudovector gauge field which originates from the condensation of topological defects in compact lowenergy effective BF theories. There is no massive Higgs scalar as there is no local order parameter. When electromagnetism is switched on, the photon acquires mass by the topological BF mechanism. Although the charge of the gapless mode (2 and the topological order (4 are the same as those of the standard Higgs model, the two models of superconductivity are clearly different since the origins of the gap, reflected in the high-energy sectors are totally different. In 2D thi! s type of superconductivity is explicitly realized as global superconductivity in Josephson junction arrays. In 3D this model predicts a possible phase transition from topological insulators to Higgsless superconductors.

  7. Superconducting Fullerene Nanowhiskers

    Directory of Open Access Journals (Sweden)

    Yoshihiko Takano

    2012-04-01

    Full Text Available We synthesized superconducting fullerene nanowhiskers (C60NWs by potassium (K intercalation. They showed large superconducting volume fractions, as high as 80%. The superconducting transition temperature at 17 K was independent of the K content (x in the range between 1.6 and 6.0 in K-doped C60 nanowhiskers (KxC60NWs, while the superconducting volume fractions changed with x. The highest shielding fraction of a full shielding volume was observed in the material of K3.3C60NW by heating at 200 °C. On the other hand, that of a K-doped fullerene (K-C60 crystal was less than 1%. We report the superconducting behaviors of our newly synthesized KxC60NWs in comparison to those of KxC60 crystals, which show superconductivity at 19 K in K3C60. The lattice structures are also discussed, based on the x-ray diffraction (XRD analyses.

  8. Pairing theory of striped superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Loder, Florian; Kampf, Arno P.; Kopp, Thilo; Graser, Siegfried [Center for Electronic Correlations and Magnetism, Institute of Physics, Augsburg (Germany)

    2011-07-01

    Striped high-T{sub c} superconductors such as La{sub 7/8}Ba{sub 1/8}CuO{sub 4} show a fascinating competition between spin and charge order on the one hand and superconductivity on the other. A theory for these systems therefore has to capture both the spin correlations in an antiferromagnet and the pair-correlation of a superconductor. For this purpose we have developed an effective Hartree-Fock theory by merging electron pairing with finite center-of-mass momentum and antiferromagnetism. We show that this theory reproduces the key experimental features such as the formation of the antiferromagnetic stripe patterns at 7/8 band filling or the quasi one-dimensional electronic structure observed by photoemission spectroscopy.

  9. The role of local repulsion in superconductivity in the Hubbard-Holstein model

    Science.gov (United States)

    Lin, Chungwei; Wang, Bingnan; Teo, Koon Hoo

    2017-01-01

    We examine the superconducting solution in the Hubbard-Holstein model using Dynamical Mean Field Theory. The Holstein term introduces the site-independent Boson fields coupling to local electron density, and has two competing influences on superconductivity: The Boson field mediates the effective electron-electron attraction, which is essential for the S-wave electron pairing; the same coupling to the Boson fields also induces the polaron effect, which makes the system less metallic and thus suppresses superconductivity. The Hubbard term introduces an energy penalty U when two electrons occupy the same site, which is expected to suppress superconductivity. By solving the Hubbard-Holstein model using Dynamical Mean Field theory, we find that the Hubbard U can be beneficial to superconductivity under some circumstances. In particular, we demonstrate that when the Boson energy Ω is small, a weak local repulsion actually stabilizesthe S-wave superconducting state. This behavior can be understood as an interplay between superconductivity, the polaron effect, and the on-site repulsion: As the polaron effect is strong and suppresses superconductivity in the small Ω regime, the weak on-site repulsion reduces the polaron effect and effectively enhances superconductivity. Our calculation elucidates the role of local repulsion in the conventional S-wave superconductors.

  10. Magnetic and Superconducting Materials at High Pressures

    Energy Technology Data Exchange (ETDEWEB)

    Struzhkin, Viktor V. [Carnegie Inst. of Washington, Washington, DC (United States)

    2015-03-24

    The work concentrates on few important tasks in enabling techniques for search of superconducting compressed hydrogen compounds and pure hydrogen, investigation of mechanisms of high-Tc superconductivity, and exploring new superconducting materials. Along that route we performed several challenging tasks, including discovery of new forms of polyhydrides of alkali metal Na at very high pressures. These experiments help us to establish the experimental environment that will provide important information on the high-pressure properties of hydrogen-rich compounds. Our recent progress in RIXS measurements opens a whole field of strongly correlated 3d materials. We have developed a systematic approach to measure major electronic parameters, like Hubbard energy U, and charge transfer energy Δ, as function of pressure. This technique will enable also RIXS studies of magnetic excitations in iridates and other 5d materials at the L edge, which attract a lot of interest recently. We have developed new magnetic sensing technique based on optically detected magnetic resonance from NV centers in diamond. The technique can be applied to study superconductivity in high-TC materials, to search for magnetic transitions in strongly correlated and itinerant magnetic materials under pressure. Summary of Project Activities; development of high-pressure experimentation platform for exploration of new potential superconductors, metal polyhydrides (including newly discovered alkali metal polyhydrides), and already known superconductors at the limit of static high-pressure techniques; investigation of special classes of superconducting compounds (high-Tc superconductors, new superconducting materials), that may provide new fundamental knowledge and may prove important for application as high-temperature/high-critical parameter superconductors; investigation of the pressure dependence of superconductivity and magnetic/phase transformations in 3d transition metal compounds, including

  11. The superconducting spin valve and triplet superconductivity

    Science.gov (United States)

    Garifullin, I. A.; Leksin, P. V.; Garif`yanov, N. N.; Kamashev, A. A.; Fominov, Ya. V.; Schumann, J.; Krupskaya, Y.; Kataev, V.; Schmidt, O. G.; Büchner, B.

    2015-01-01

    A review of our recent results on the spin valve effect is presented. We have used a theoretically proposed spin switch design F1/F2/S comprising a ferromagnetic bilayer (F1/F2) as a ferromagnetic component, and an ordinary superconductor (S) as the second interface component. Based on it we have prepared and studied in detail a set of multilayers CoOx/Fe1/Cu/Fe2/S (S=In or Pb). In these heterostructures we have realized for the first time a full spin switch effect for the superconducting current, have observed its sign-changing oscillating behavior as a function of the Fe2-layer thickness and finally have obtained direct evidence for the long-range triplet superconductivity arising due to noncollinearity of the magnetizations of the Fe1 and Fe2 layers.

  12. Ultrafast electron relaxation in superconducting Bi(2)Sr(2)CaCu(2)O(8+delta) by time-resolved photoelectron spectroscopy.

    Science.gov (United States)

    Perfetti, L; Loukakos, P A; Lisowski, M; Bovensiepen, U; Eisaki, H; Wolf, M

    2007-11-09

    Time-resolved photoelectron spectroscopy is employed to study the dynamics of photoexcited electrons in optimally doped Bi{2}Sr{2}CaCu{2}O{8+delta} (Bi-2212). Hot electrons thermalize in less than 50 fs and dissipate their energy on two distinct time scales (110 fs and 2 ps). These are attributed to the generation and subsequent decay of nonequilibrium phonons, respectively. We conclude that 20% of the total lattice modes dominate the coupling strength and estimate the second momentum of the Eliashberg coupling function lambdaOmega{0}{2}=360+/-30 meV{2}. For the typical phonon energy of copper-oxygen bonds (Omega{0} approximately 40-70 meV), this results in an average electron-phonon coupling lambda<0.25.

  13. Superconductivity of heavy fermions in the Kondo lattice model

    Energy Technology Data Exchange (ETDEWEB)

    Sykora, Steffen [IFW Dresden (Germany); Becker, Klaus W. [Institut fuer Theoretische Physik, Technische Universitaet Dresden (Germany)

    2015-07-01

    Understanding of the origin of superconductivity in strongly correlated electron systems is one of the basic unresolved problems in physics. Examples for such systems are the cuprates and also the heavy-fermion metals, which are compounds with 4f and 5f electrons. In all these materials the superconducting pairing interaction is often believed to be predominantly mediated by spin fluctuations and not by phonons as in normal metals. For the Kondo-lattice model we present results, which are derived within the Projective Renormalization Method (PRM). Based on a recent study of the one-particle spectral function for the normal state we first derive an effective Hamiltonian which describes heavy fermion quasiparticle bands close to the Fermi surface. An extension to the superconducting phase leads to d-wave solutions for the superconducting order parameter in agreement with recent STM measurements.

  14. Superconductivity in layered binary silicides: A density functional theory study

    Science.gov (United States)

    Flores-Livas, José A.; Debord, Régis; Botti, Silvana; San Miguel, Alfonso; Pailhès, Stéphane; Marques, Miguel A. L.

    2011-11-01

    A class of metal disilicides (of the form XSi2, where X is a divalent metal) crystallizes in the EuGe2 structure, formed by hexagonal corrugated silicon planes intercalated with metal atoms. These compounds are superconducting like other layered superconductors, such as MgB2. Moreover, their properties can be easily tuned either by external pressure or by negative chemical pressure (i.e., by changing the metal), which makes disilicides an ideal testbed to study superconductivity in layered systems. In view of this, we present an extensive density functional theory study of the electronic and phonon band structures as well as the electron-phonon interaction of metal disilicides. Our results explain the variation of the superconducting transition temperature with pressure and the species of the intercalating atom, and allow us to predict superconductivity for compounds not yet synthesized belonging to this family.

  15. Novel Majorana mode and magnetoresistance in ferromagnetic superconducting topological insulator

    OpenAIRE

    Goudarzi, Hadi; Khezerlou, Maryam; Asgarifar, Samin

    2017-01-01

    Among the potential applications of topological insulators, we investigate theoretically the effect of coexistence of proximity-induced ferromagnetism and superconductivity on the surface states of 3-dimensional topological insulator, where the superconducting electron-hole excitations can be significantly affected by the magnetization of ferromagnetic order. We find that, Majorana mode energy, as a verified feature of TI F/S structure, along the interface sensitively depends on the magnitude...

  16. Microwave dependence of subharmonic gap structure in superconducting junctions

    DEFF Research Database (Denmark)

    Sørensen, O. Hoffman; Kofoed, Bent; Pedersen, Niels Falsig

    1974-01-01

    with the superconducting energy gap itself. The location in voltage of all these structures is given by eV=(2Δ±nh ν) / m, where 2Δ is the superconducting energy gap, ν is the applied frequency, h is Planck's constant, e is the magnitude of the electronic charge, V is the dc voltage drop across the junction, and m and n...

  17. FROM THE HISTORY OF PHYSICS: Two classic experiments in superconductivity

    Science.gov (United States)

    Meĭlikhov, E. Z.

    1988-05-01

    Two experiments of I. K. Kikoin—the correlation between superconductivity and the galvanomagnetic properties of metals (1933), and the gyromagnetic effect in superconductors (1938)—which were carried out long before the appearance of the microscopic theory of superconductivity, anticipated two of its principal conclusions. Established were: 1) the determining role of electron-phonon interaction; 2) the orbital nature of diamagnetism in superconductors.

  18. Microstrip filters for measurement and control of superconducting qubits.

    Science.gov (United States)

    Longobardi, Luigi; Bennett, Douglas A; Patel, Vijay; Chen, Wei; Lukens, James E

    2013-01-01

    Careful filtering is necessary for observations of quantum phenomena in superconducting circuits at low temperatures. Measurements of coherence between quantum states require extensive filtering to protect against noise coupled from room temperature electronics. We demonstrate distributed transmission line filters which cut off exponentially at GHz frequencies and can be anchored at the base temperature of a dilution refrigerator. The compact design makes them suitable to filter many different bias lines in the same setup, necessary for the control and measurement of superconducting qubits.

  19. Optical data transmission at the superconducting super collider

    Energy Technology Data Exchange (ETDEWEB)

    Leskovar, B. [Lawrence Berkeley Lab., CA (United States)

    1989-04-01

    Digital and analog data transmissions via fiber optics for the Superconducting Super Collider have been investigated. The state of the art of optical transmitters, low loss fiber waveguides, receivers and associated electronics components are reviewed and summarized. Emphasis is placed on the effects of the radiation environment on the performance of an optical data transmission system components. Also, the performance of candidate components of the wide band digital and analog transmission systems intended for deployment in the Superconducting Super Collider Detector is discussed.

  20. Fast Resonance Frequency Modulation in Superconducting Stripline Resonator

    OpenAIRE

    Segev, Eran; Abdo, Baleegh; Shtempluck, Oleg; Buks, Eyal

    2006-01-01

    Fast resonance frequency modulation of a superconducting stripline resonator is investigated. The experiments are performed using a novel device which integrates a hot electron detector (HED) into a superconducting stripline ring resonator. Frequency modulation is demonstrated by both applying dc current or voltage to the HED, and by applying optical illumination, with modulation frequencies of up to 4.2GHz. Potential applications for such a device are in telecommunication, quantum cryptograp...

  1. Towards inducing superconductivity into graphene

    Science.gov (United States)

    Efetov, Dmitri K.

    Graphenes transport properties have been extensively studied in the 10 years since its discovery in 2004, with ground-breaking experimental observations such as Klein tunneling, fractional quantum Hall effect and Hofstadters butterfly. Though, so far, it turned out to be rather poor on complex correlated electronic ground states and phase transitions, despite various theoretical predictions. The purpose of this thesis is to help understanding the underlying theoretical and experimental reasons for the lack of strong electronic interactions in graphene, and, employing graphenes high tunability and versatility, to identify and alter experimental parameters that could help to induce stronger correlations. In particular graphene holds one last, not yet experimentally discovered prediction, namely exhibiting intrinsic superconductivity. With its vanishingly small Fermi surface at the Dirac point, graphene is a semi-metal with very weak electronic interactions. Though, if it is doped into the metallic regime, where the size of the Fermi surface becomes comparable to the size of the Brillouin zone, the density of states becomes sizeable and electronic interactions are predicted to be dramatically enhanced, resulting in competing correlated ground states such as superconductivity, magnetism and charge density wave formation. Following these predictions, this thesis first describes the creation of metallic graphene at high carrier doping via electrostatic doping techniques based on electrolytic gates. Due to graphenes surface only properties, we are able to induce carrier densities above n>1014 cm-2 (epsilonF>1eV) into the chemically inert graphene. While at these record high carrier densities we yet do not observe superconductivity, we do observe fundamentally altered transport properties as compared to semi-metallic graphene. Here, detailed measurements of the low temperature resistivity reveal that the electron-phonon interactions are governed by a reduced, density

  2. Electron-phonon superconductivity in LaO{sub 0.5}F{sub 0.5}BiSe{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Yanqing; Du, Yongping; Wan, Xiangang, E-mail: xgwan@nju.edu.cn; Wang, Bogen [Department of Physics and National Laboratory of Solid State Microstructures, Nanjing University, Nanjing 210093 (China); Ding, Hang-Chen [Key Laboratory of Polar Materials and Devices, Ministry of Education, East China Normal University, Shanghai 200062 (China); Savrasov, Sergey Y. [Department of Physics, University of California, Davis, One Shields Avenue, Davis, California 95616 (United States); Duan, Chun-Gang [Key Laboratory of Polar Materials and Devices, Ministry of Education, East China Normal University, Shanghai 200062 (China); National Laboratory for Infrared Physics, Chinese Academy of Sciences, Shanghai 200083 (China)

    2014-06-21

    We report density functional calculations of the electronic structure, Fermi surface, phonon spectrum and electron–phonon coupling for the newly discovered superconductor LaO{sub 0.5}F{sub 0.5}BiSe{sub 2}. It is confirmed that there is a strong Fermi surface nesting at (π,π,0), which results in unstable phonon branches. Combining the frozen phonon total energy calculations and an anharmonic oscillator model, we find that the quantum fluctuation prevents the appearance of static long–range order. The calculation shows that LaO{sub 0.5}F{sub 0.5}BiSe{sub 2} is highly anisotropic, and same as its cousin LaO{sub 0.5}F{sub 0.5}BiS{sub 2}, this compound is also a conventional electron-phonon coupling induced superconductor.

  3. Characterization of superconducting multilayers samples

    CERN Document Server

    Antoine, C Z; Berry, S; Bouat, S; Jacquot, J F; Villegier, J C; Lamura, G; Gurevich, A

    2009-01-01

    Best RF bulk niobium accelerating cavities have nearly reached their ultimate limits at rf equatorial magnetic field H  200 mT close to the thermodynamic critical field Hc. In 2006 Gurevich proposed to use nanoscale layers of superconducting materials with high values of Hc > HcNb for magnetic shielding of bulk niobium to increase the breakdown magnetic field inside SC RF cavities [1]. Depositing good quality layers inside a whole cavity is rather difficult but we have sputtered high quality samples by applying the technique used for the preparation of superconducting electronics circuits and characterized these samples by X-ray reflectivity, dc resistivity (PPMS) and dc magnetization (SQUID). Dc magnetization curves of a 250 nm thick Nb film have been measured, with and without a magnetron sputtered coating of a single or multiple stack of 15 nm MgO and 25 nm NbN layers. The Nb samples with/without the coating clearly exhibit different behaviors. Because SQUID measurements are influenced by edge an...

  4. Nanoscience and Engineering in Superconductivity

    CERN Document Server

    Moshchalkov, Victor; Lang, Wolfgang

    2010-01-01

    For emerging energy saving technologies, superconducting materials with superior performance are needed. Such materials can be developed by manipulating the 'elementary building blocks' through nanostructuring. For superconductivity the 'elementary blocks' are Cooper pair and fluxon (vortex). This book presents new ways how to modify superconductivity and vortex matter through nanostructuring and the use of nanoscale magnetic templates. The basic nano-effects, vortex and vortex-antivortex patterns, vortex dynamics, Josephson phenomena, critical currents, and interplay between superconductivity

  5. Vibration-induced field fluctuations in a superconducting magnet

    Science.gov (United States)

    Britton, J. W.; Bohnet, J. G.; Sawyer, B. C.; Uys, H.; Biercuk, M. J.; Bollinger, J. J.

    2016-06-01

    Superconducting magnets enable precise control of nuclear and electron spins, and are used in experiments that explore biological and condensed-matter systems, and fundamental atomic particles. In high-precision applications, a common view is that slow (Be+9 electron-spin qubits in the 4.46 -T field of a superconducting magnet. We measure a spin-echo T2 coherence time of ˜6 ms for the Be+9 electron-spin resonance at 124 GHz , limited by part-per-billion fractional fluctuations in the magnet's homogeneous field. Vibration isolation of the magnet improved T2 to ˜50 ms.

  6. Design and fabrication of superconducting HEB mixer

    Institute of Scientific and Technical Information of China (English)

    WANG JinPing; LI YangBin; KANG Lin; WANG Yu; ZHONG YangYin; LIANG Min; CHEN Jian; CAO ChunHai; XU WeiWei; WU PeiHeng

    2009-01-01

    This paper describes the design and fabrication of superconducting hot electron bolometer (HEB)mixer based on ultra-thin superconducting NbN films. The high quality films were epitaxially grown on high resistance Si substrates. The device was fabricated by magnetron sputtering, electron beam lithography (EBL), reactive ion etching (RIE), lithography, and so on. The device's resistance-temperature (R-T) curves and current-voltage (I-V) curves were studied. The results of THz response of the device are presented. Y-factor technique was used to measure the device's noise temperature. When the device was irradiated with a laser radiation of 2.5 THz, the obtained lowest noise temperature of the device was 2213 K.

  7. Interface high-temperature superconductivity

    Science.gov (United States)

    Wang, Lili; Ma, Xucun; Xue, Qi-Kun

    2016-12-01

    Cuprate high-temperature superconductors consist of two quasi-two-dimensional (2D) substructures: CuO2 superconducting layers and charge reservoir layers. The superconductivity is realized by charge transfer from the charge reservoir layers into the superconducting layers without chemical dopants and defects being introduced into the latter, similar to modulation-doping in the semiconductor superlattices of AlGaAs/GaAs. Inspired by this scheme, we have been searching for high-temperature superconductivity in ultra-thin films of superconductors epitaxially grown on semiconductor/oxide substrates since 2008. We have observed interface-enhanced superconductivity in both conventional and unconventional superconducting films, including single atomic layer films of Pb and In on Si substrates and single unit cell (UC) films of FeSe on SrTiO3 (STO) substrates. The discovery of high-temperature superconductivity with a superconducting gap of ∼20 meV in 1UC-FeSe/STO has stimulated tremendous interest in the superconductivity community, for it opens a new avenue for both raising superconducting transition temperature and understanding the pairing mechanism of unconventional high-temperature superconductivity. Here, we review mainly the experimental progress on interface-enhanced superconductivity in the three systems mentioned above with emphasis on 1UC-FeSe/STO, studied by scanning tunneling microscopy/spectroscopy, angle-resolved photoemission spectroscopy and transport experiments. We discuss the roles of interfaces and a possible pairing mechanism inferred from these studies.

  8. Connectivity and superconductivity

    CERN Document Server

    Rubinstein, Jacob

    2000-01-01

    The motto of connectivity and superconductivity is that the solutions of the Ginzburg--Landau equations are qualitatively influenced by the topology of the boundaries, as in multiply-connected samples. Special attention is paid to the "zero set", the set of the positions (also known as "quantum vortices") where the order parameter vanishes. The effects considered here usually become important in the regime where the coherence length is of the order of the dimensions of the sample. It takes the intuition of physicists and the awareness of mathematicians to find these new effects. In connectivity and superconductivity, theoretical and experimental physicists are brought together with pure and applied mathematicians to review these surprising results. This volume is intended to serve as a reference book for graduate students and researchers in physics or mathematics interested in superconductivity, or in the Schrödinger equation as a limiting case of the Ginzburg--Landau equations.

  9. Large Superconducting Magnet Systems

    CERN Document Server

    Védrine, P.

    2014-07-17

    The increase of energy in accelerators over the past decades has led to the design of superconducting magnets for both accelerators and the associated detectors. The use of Nb−Ti superconducting materials allows an increase in the dipole field by up to 10 T compared with the maximum field of 2 T in a conventional magnet. The field bending of the particles in the detectors and generated by the magnets can also be increased. New materials, such as Nb3Sn and high temperature superconductor (HTS) conductors, can open the way to higher fields, in the range 13–20 T. The latest generations of fusion machines producing hot plasma also use large superconducting magnet systems.

  10. Conference Report: 5th Annual Georgia Conference on Information Literacy

    Directory of Open Access Journals (Sweden)

    Rebecca Ziegler

    2009-11-01

    Full Text Available The 5th annual Georgia Conference on Information Literacy took place in Savannah, Georgia on October 3-4, 2008. Since its inception, this conference has drawn participants from across the United States and even a few from abroad. Jointly sponsored by the Zach S. Henderson Library, the Department of Writing and Linguistics, the College of Education, and the Center for Continuing Education at Georgia Southern University, the conference offers both theoretical and practical discussions of the complex issues involved in teaching students how to find, interpret and use information in emerging electronic technologies against the backdrop of one of America’s loveliest cities.

  11. Synthesis and superconductivity of (Agx/CuTl-1223 composites

    Directory of Open Access Journals (Sweden)

    Abdul Jabbar

    2015-06-01

    Full Text Available Series of (Agx/(Cu0.5Tl0.5Ba2Ca2Cu3O10-δ {(Agx/CuTl-1223} nano-superconductor composites were synthesized with different concentrations (i.e. x=0~4.0 wt% of silver (Ag nanoparticles. Low anisotropic CuTl-1223 superconducting matrix was prepared by solid-state reaction and Ag nanoparticles were prepared by a sol–gel method separately. The required (Agx/CuTl-1223 composition was obtained by the inclusion of Ag nanoparticles in CuTl-1223 superconducting matrix. Structural, morphological, compositional and superconducting transport properties of these composites were investigated in detail by x-ray diffraction (XRD, scanning electron microscopy (SEM, energy dispersive x-rays (EDX spectroscopy and four-point probe electrical resistivity (ρ measurements. The inclusion of Ag nanoparticles enhanced the superconducting properties without affecting the tetragonal structure of the host CuTl-1223 matrix. The improvement in superconducting properties of (Agx/CuTl-1223 composites is most likely due to enhanced inter-grains coupling and increased superconducting volume fraction after the addition of metallic Ag nanoparticles at the inter-crystallite sites in the samples. The presence of Ag nanoparticles at the grain-boundaries may increase the number of flux pinning centers, which were present in the form of weak-links in the pure CuTl-1223 superconducting matrix.

  12. Hard Superconducting Gap in InSb Nanowires

    Science.gov (United States)

    Gül, Önder; Zhang, Hao; de Vries, Folkert K.; van Veen, Jasper; Zuo, Kun; Mourik, Vincent; Conesa-Boj, Sonia; Nowak, Michał P.; van Woerkom, David J.; Quintero-Pérez, Marina; Cassidy, Maja C.; Geresdi, Attila; Koelling, Sebastian; Car, Diana; Plissard, Sébastien R.; Bakkers, Erik P. A. M.; Kouwenhoven, Leo P.

    2017-04-01

    Topological superconductivity is a state of matter that can host Majorana modes, the building blocks of a topological quantum computer. Many experimental platforms predicted to show such a topological state rely on proximity-induced superconductivity. However, accessing the topological properties requires an induced hard superconducting gap, which is challenging to achieve for most material systems. We have systematically studied how the interface between an InSb semiconductor nanowire and a NbTiN superconductor affects the induced superconducting properties. Step by step, we improve the homogeneity of the interface while ensuring a barrier-free electrical contact to the superconductor, and obtain a hard gap in the InSb nanowire. The magnetic field stability of NbTiN allows the InSb nanowire to maintain a hard gap and a supercurrent in the presence of magnetic fields (~ 0.5 Tesla), a requirement for topological superconductivity in one-dimensional systems. Our study provides a guideline to induce superconductivity in various experimental platforms such as semiconductor nanowires, two dimensional electron gases and topological insulators, and holds relevance for topological superconductivity and quantum computation.

  13. Amorphous molybdenum silicon superconducting thin films

    Directory of Open Access Journals (Sweden)

    D. Bosworth

    2015-08-01

    Full Text Available Amorphous superconductors have become attractive candidate materials for superconducting nanowire single-photon detectors due to their ease of growth, homogeneity and competitive superconducting properties. To date the majority of devices have been fabricated using WxSi1−x, though other amorphous superconductors such as molybdenum silicide (MoxSi1−x offer increased transition temperature. This study focuses on the properties of MoSi thin films grown by magnetron sputtering. We examine how the composition and growth conditions affect film properties. For 100 nm film thickness, we report that the superconducting transition temperature (Tc reaches a maximum of 7.6 K at a composition of Mo83Si17. The transition temperature and amorphous character can be improved by cooling of the substrate during growth which inhibits formation of a crystalline phase. X-ray diffraction and transmission electron microscopy studies confirm the absence of long range order. We observe that for a range of 6 common substrates (silicon, thermally oxidized silicon, R- and C-plane sapphire, x-plane lithium niobate and quartz, there is no variation in superconducting transition temperature, making MoSi an excellent candidate material for SNSPDs.

  14. Failed theories of superconductivity

    CERN Document Server

    Schmalian, Joerg

    2010-01-01

    Almost half a century passed between the discovery of superconductivity by Kammerlingh Onnes and the theoretical explanation of the phenomenon by Bardeen, Cooper and Schrieffer. During the intervening years the brightest minds in theoretical physics tried and failed to develop a microscopic understanding of the effect. A summary of some of those unsuccessful attempts to understand superconductivity not only demonstrates the extraordinary achievement made by formulating the BCS theory, but also illustrates that mistakes are a natural and healthy part of the scientific discourse, and that inapplicable, even incorrect theories can turn out to be interesting and inspiring.

  15. Superconducting magnetic quadrupole

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J.W.; Shepard, K.W.; Nolen, J.A.

    1995-08-01

    A design was developed for a 350 T/m, 2.6-cm clear aperture superconducting quadrupole focussing element for use in a very low q/m superconducting linac as discussed below. The quadrupole incorporates holmium pole tips, and a rectangular-section winding using standard commercially-available Nb-Ti wire. The magnet was modeled numerically using both 2D and 3D codes, as a basis for numerical ray tracing using the quadrupole as a linac element. Components for a prototype singlet are being procured during FY 1995.

  16. Fingerprints of Mott Superconductivity

    Institute of Scientific and Technical Information of China (English)

    王强华

    2003-01-01

    We improve a previous theory of doped Mott insulators with duality between pairing and magnetism by a further duality transform. As the result we obtained a quantum Ginzburg-Landau theory describing the Cooper pair condensate and the dual of spin condensate. We address the superconductivity by doping a Mott insulator,which we call the Mott superconductivity. Some fingerprints of such novelty in cuprates are the scaling between neutron resonance energy and superfluid density, and the induced quantized spin moment by vortices or Zn impurity (together with circulating charge super-current to be checked by experiments).

  17. An experimental superconducting helical undulator

    Energy Technology Data Exchange (ETDEWEB)

    Caspi, S.; Taylor, C. [Lawrence Berkeley Lab., CA (United States)

    1995-12-31

    Improvements in the technology of superconducting magnets for high energy physics and recent advancements in SC materials with the artificial pinning centers (APC){sup 2}, have made a bifilar helical SC device an attractive candidate for a single-pass free electron laser (FEL){sup 3}. Initial studies have suggested that a 6.5 mm inner diameter helical device, with a 27 mm period, can generate a central field of 2-2.5 Tesla. Additional studies have also suggested that with a stored energy of 300 J/m, such a device can be made self-protecting in the event of a quench. However, since the most critical area associated with high current density SC magnets is connected with quenching and training, a short experimental device will have to be built and tested. In this paper we discuss technical issues relevant to the construction of such a device, including a conceptual design, fields, and forces.

  18. Mendel conference

    CERN Document Server

    2015-01-01

    This book is a collection of selected accepted papers of Mendel conference that has been held in Brno, Czech Republic in June 2015. The book contents three chapters which represent recent advances in soft computing including intelligent image processing and bio-inspired robotics.: Chapter 1: Evolutionary Computing, and Swarm intelligence, Chapter 2: Neural Networks, Self-organization, and Machine Learning, and Chapter3: Intelligent Image Processing, and Bio-inspired Robotics. The Mendel conference was established in 1995, and it carries the name of the scientist and Augustinian priest Gregor J. Mendel who discovered the famous Laws of Heredity. In 2015 we are commemorating 150 years since Mendel's lectures, which he presented in Brno on February and March 1865. The main aim of the conference was to create a periodical possibility for students, academics and researchers to exchange their ideas and novel research methods.  .

  19. Conference Notification

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Roskill Information Services and Metal Events Ltd areorganizing the 2nd International Rare Earths Conference,which will be held at the Conrad Hotel in Hong Kong onFebruary 28 to March 2 2006.The program is structured tocover all the main aspects of the rare earths industry,including development of Chinese rare earth industry; trendsin rare earths demand; potential constraints on supply;research on potential capacity of rare earths supply chain.Global rare earths consumers will attend the conference.Registra...

  20. Prediction of phonon-mediated superconductivity in borophene

    Science.gov (United States)

    Gao, Miao; Li, Qi-Zhi; Yan, Xun-Wang; Wang, Jun

    2017-01-01

    Superconductivity in two-dimensional compounds is widely studied, not only because of its application in constructing nano-superconducting devices, but also for general scientific interest. Very recently, borophene (a two-dimensional boron sheet) has been successfully grown on the Ag(111) surface, through direct evaporation of a pure boron source. The experiment unveiled two types of borophene structures, namely β12 and χ3. Herein, we employed density-functional first-principles calculations to investigate the electron-phonon coupling and superconductivity in both structures of borophene. The band structures of β12 and χ3 borophenes exhibit inherent metallicity. We found that electron-phonon coupling constants in the two compounds are larger than that in MgB2. The superconducting transition temperatures were determined to be 18.7 K and 24.7 K through the McMillian-Allen-Dynes formula. These temperatures are much higher than the theoretically predicted 8.1 K and experimentally observed 7.4 K superconductivity in graphene. Our findings will enrich nano-superconducting device applications and boron-related materials science.