WorldWideScience

Sample records for sulfur anchor fragment

  1. Monolayer Assemblies of a De Novo Designed 4-alpha-Helix Bundle Carboprotein and Its Sulfur Anchor Fragment on Au(111) Surfaces Addressed by Voltammetry and In Situ Scanning Tunneling Microscopy

    DEFF Research Database (Denmark)

    Brask, Jesper; Wackerbarth, Hainer; Jensen, Knud J.

    2003-01-01

    carboprotein without thiol anchor have been prepared and investigated for comparison. Cyclic and differential pulse voltammetry (DPV) of the proteins show desorption peaks around -750 mV (SCE), whereas the thiol anchor desorption peak is at -685 mV. The peaks are by far the highest for thiol monomeric 4-R...

  2. Fracture resistance of reattached incisor fragments with mini fibre-reinforced composite anchors.

    NARCIS (Netherlands)

    Fennis, W.M.M.; Kreulen, C.M.; Wolke, J.G.C.; Fokkinga, W.A.; Machado, C.; Creugers, N.H.J.

    2009-01-01

    OBJECTIVES: Fractured coronal fragments of incisors can be adhered to the remaining tooth with resin composite, but are prone to failure. This study explores whether mini fibre-reinforced composite (FRC) anchors increase fracture resistance of reattached fragments. METHODS: Forty-five extracted

  3. Surface oxidized mesoporous carbons derived from porous silicon as dual polysulfide confinement and anchoring cathodes in lithium sulfur batteries

    Science.gov (United States)

    Carter, Rachel; Ejorh, Dennis; Share, Keith; Cohn, Adam P.; Douglas, Anna; Muralidharan, Nitin; Tovar, Trenton M.; Pint, Cary L.

    2016-10-01

    Despite widespread focus on porous carbons for lithium-sulfur battery cathode materials, electrode design to preserve mass-specific performance and sustained extended cycling stability remains a challenge. Here, we demonstrate electrochemically etched porous silicon as a sacrificial template to produce a new class of functional mesoporous carbons optimized for dual chemical and physical confinement of soluble polysulfides in lithium-sulfur battery cathodes. Melt infiltration loading of sulfur at 60 wt% enables initial discharge capacity of 1350 mAh/gsulfur at rates of 0.1 C - approaching theoretical capacity of 1675 mAh/gsulfur. Cycling performance measured at 0.2 C indicates 81% capacity retention measured over 100 cycles with 830 mAh/gsulfur capacity. Unlike other carbons, this template combines structural properties necessary for sulfur containment and polysulfide confinement to achieve high specific capacity, but also boasts surface-bound oxygen-containing functional groups that are able to chemically anchor the soluble Li2Sn species on the interior of the mesoporous carbon to sustain cycling performance. In turn, this elucidates a scalable and competitive material framework that is capable, without the addition of additional membranes or inactive anchoring materials, of providing the simultaneous anchoring and confinement effects necessary to overcome performance limitations in lithium sulfur batteries.

  4. On moments of the multiplicity events of slow target fragments in relativistic Sulfur-ion collisions

    Science.gov (United States)

    Abdelsalam, A.; Kamel, S.; Rashed, N.; Sabry, N.

    2014-07-01

    A detailed study on the multiplicity characteristics of the slow target fragments emitted in relativistic heavy-ion collisions has been carried out at ELab = 3.7A and 200A GeV using 32S projectile. The beam energy dependence of the black particles produced in the full phase space of 32S-emulsion (32S-Em) interactions on the target size in terms of their moments (mean, variance, skewness and kurtosis) is investigated. The various order moments of target fragments emitted in the interactions of 32S beams with the heavy (AgBr) target nuclei are estimated in the forward (FHS) and backward (BHS) hemispheres. The investigated values of ratio of variance to mean at both energies show that the multiplicity distributions (MDs) are not Poissonian and the strongly correlated emission of target fragments are in the forward directions. The degree of anisotropic fragment emission and nature of correlation among the emitted fragments are investigated. The energy dependence of entropy is examined in both hemispheres. The entropy values normalized to average multiplicity are found to be energy independent. Scaling of MD of black particles produced in these interactions has been studied to verify the validity of scaling hypothesis via two scaling (Koba-Nielsen-Olesen (KNO)-scaling and Hegyi-scaling) functions. A simplified universal function has been used in each scaling to display the experimental data.

  5. Glycosyl-Phosphatidylinositol-Anchored Anti-HIV Env Single-Chain Variable Fragments Interfere with HIV-1 Env Processing and Viral Infectivity.

    Science.gov (United States)

    Misra, Anisha; Gleeson, Emile; Wang, Weiming; Ye, Chaobaihui; Zhou, Paul; Kimata, Jason T

    2018-04-01

    In previous studies, we demonstrated that single-chain variable fragments (scFvs) from anti-human immunodeficiency virus (HIV) Env monoclonal antibodies act as entry inhibitors when tethered to the surface of target cells by a glycosyl-phosphatidylinositol (GPI) anchor. Interestingly, even if a virus escapes inhibition at entry, its replication is ultimately controlled. We hypothesized that in addition to functioning as entry inhibitors, anti-HIV GPI-scFvs may also interact with Env in an infected cell, thereby interfering with the infectivity of newly produced virions. Here, we show that expression of the anti-HIV Env GPI-scFvs in virus-producing cells reduced the release of HIV from cells 5- to 22-fold, and infectivity of the virions that were released was inhibited by 74% to 99%. Additionally, anti-HIV Env GPI-scFv X5 inhibited virion production and infectivity after latency reactivation and blocked transmitter/founder virus production and infectivity in primary CD4 + T cells. In contrast, simian immunodeficiency virus (SIV) production and infectivity were not affected by the anti-HIV Env GPI-scFvs. Loss of infectivity of HIV was associated with a reduction in the amount of virion-associated Env gp120. Interestingly, an analysis of Env expression in cell lysates demonstrated that the anti-Env GPI-scFvs interfered with processing of Env gp160 precursors in cells. These data indicate that GPI-scFvs can inhibit Env processing and function, thereby restricting production and infectivity of newly synthesized HIV. Anti-Env GPI-scFvs therefore appear to be unique anti-HIV molecules as they derive their potent inhibitory activity by interfering with both early (receptor binding/entry) and late (Env processing and incorporation into virions) stages of the HIV life cycle. IMPORTANCE The restoration of immune function and persistence of CD4 + T cells in HIV-1-infected individuals without antiretroviral therapy requires a way to increase resistance of CD4 + T cells to

  6. Anchor Modeling

    Science.gov (United States)

    Regardt, Olle; Rönnbäck, Lars; Bergholtz, Maria; Johannesson, Paul; Wohed, Petia

    Maintaining and evolving data warehouses is a complex, error prone, and time consuming activity. The main reason for this state of affairs is that the environment of a data warehouse is in constant change, while the warehouse itself needs to provide a stable and consistent interface to information spanning extended periods of time. In this paper, we propose a modeling technique for data warehousing, called anchor modeling, that offers non-destructive extensibility mechanisms, thereby enabling robust and flexible management of changes in source systems. A key benefit of anchor modeling is that changes in a data warehouse environment only require extensions, not modifications, to the data warehouse. This ensures that existing data warehouse applications will remain unaffected by the evolution of the data warehouse, i.e. existing views and functions will not have to be modified as a result of changes in the warehouse model.

  7. Sulfur Mustard

    Science.gov (United States)

    ... Poisoning Methyl isocyanate Case Definition: Methyl Isocyanate Poisoning Mustard gas (H) (sulfur mustard) Facts About Sulfur Mustard Case ... About Strychnine Case Definition: Strychnine Sulfur mustard (H) (mustard gas) Facts About Sulfur Mustard Case Definition: Vesicant (Mustards, ...

  8. Susceptibility to anchoring effects

    Directory of Open Access Journals (Sweden)

    Todd McElroy

    2007-02-01

    Full Text Available Previous research on anchoring has shown this heuristic to be a very robust psychological phenomenon ubiquitous across many domains of human judgment and decision-making. Despite the prevalence of anchoring effects, researchers have only recently begun to investigate the underlying factors responsible for how and in what ways a person is susceptible to them. This paper examines how one such factor, the Big-Five personality trait of openness-to-experience, influences the effect of previously presented anchors on participants' judgments. Our findings indicate that participants high in openness-to-experience were significantly more influenced by anchoring cues relative to participants low in this trait. These findings were consistent across two different types of anchoring tasks providing convergent evidence for our hypothesis.

  9. The anchor integration model: A descriptive model of anchoring effects.

    Science.gov (United States)

    Turner, Brandon M; Schley, Dan R

    2016-11-01

    Few experimental effects in the psychology of judgment and decision making have been studied as meticulously as the anchoring effect. Although the existing literature provides considerable insight into the psychological processes underlying anchoring effects, extant theories up to this point have only generated qualitative predictions. While these theories have been productive in advancing our understanding of the underlying anchoring process, they leave much to be desired in the interpretation of specific anchoring effects. In this article, we introduce the Anchor Integration Model (AIM) as a descriptive tool for the measurement and quantification of anchoring effects. We develop two versions the model: one suitable for assessing between-participant anchoring effects, and another for assessing individual differences in anchoring effects. We then fit each model to data from two experiments, and demonstrate the model's utility in describing anchoring effects. Copyright © 2016 Elsevier Inc. All rights reserved.

  10. The Anchoring Concept

    DEFF Research Database (Denmark)

    Simonsen, Jesper

    1998-01-01

    This paper introduces the term 'anchoring' within systems development: Visions, developed through early systems design within an organization, need to be deeply rooted in the organization. A vision's rationale needs to be understood by those who decide if the vision should be implemented as well ...

  11. Anchored paired comparisons

    Science.gov (United States)

    Dalal, E. N.; Handley, J. C.; Wu, W.; Wang, J.

    2008-01-01

    The method of paired comparisons is often used in image quality evaluations. Psychometric scale values for quality judgments are modeled using Thurstone's Law of Comparative Judgment in which distance in a psychometric scale space is a function of the probability of preference. The transformation from psychometric space to probability is a cumulative probability distribution. The major drawback of a complete paired comparison experiment is that every treatment is compared to every other, thus the number of comparisons grows quadratically. We ameliorate this difficulty by performing paired comparisons in two stages, by precisely estimating anchors in the psychometric scale space which are spaced apart to cover the range of scale values and comparing treatments against those anchors. In this model, we employ a generalized linear model where the regression equation has a constant offset vector determined by the anchors. The result of this formulation is a straightforward statistical model easily analyzed using any modern statistics package. This enables model fitting and diagnostics. This method was applied to overall preference evaluations of color pictorial hardcopy images. The results were found to be compatible with complete paired comparison experiments, but with significantly less effort.

  12. Anchoring visions in organizations

    DEFF Research Database (Denmark)

    Simonsen, Jesper

    1999-01-01

    This paper introduces the term 'anchoring' within systems development: Visions, developed through early systems design within an organization, need to be deeply rooted in the organization. A vision's rationale needs to be understood by those who decide if the vision should be implemented as well...... as by those involved in the actual implementation. A model depicting a recent trend within systems development is presented: Organizations rely on purchasing generic software products and/or software development outsourced to external contractors. A contemporary method for participatory design, where...

  13. Career anchors of dentist leaders.

    Science.gov (United States)

    Tuononen, Tiina; Lammintakanen, Johanna; Suominen, Anna Liisa

    2016-08-01

    The work of a health care leader is demanding; in order to cope, leaders need motivation and support. The occurrence of intrinsic factors called career anchors (combination of one's competence, motives and values) could be a contributing factor in dentist leaders' career decisions. The aim of our study was to identify dentist leaders' career anchors and their association to dentist leaders' retention or turnover of the leadership position. Materials were gathered in 2014 via an electronic questionnaire from 156 current (Leaders) or former (Leavers) Finnish dentist leaders. Career anchor evaluation was conducted by the questionnaire and scoring-table taken from Edgar Schein's Career Anchors Self-Assessment. Both the most and the least important career anchors were detected by the highest and lowest scores and their occurrence reported as percentages. Associations between career anchor scores and tendency to stay were analyzed with logistic regression. 'Technical/Functional Competence' and 'Lifestyle' were most frequently reported as the most important and 'Entrepreneurial Creativity' and 'General Managerial Competence' as the least important career anchors. However, a higher level of 'General Managerial Competence' anchor was most significantly associated with staying in a leadership position. Instead, 'Pure Challenge' and 'Lifestyle' decreased the odds to stay. The knowledge of the important and essential career anchors of dentist leaders' and individuals' could perform crucial part in career choices and also in planning education, work opportunities and human resource policies promoting retention of dentist leaders and probably also other health care leaders.

  14. The electronic transport properties of B40fullerenes with chalcogens as anchor atoms.

    Science.gov (United States)

    Kaur, Rupendeep; Kaur, Jupinder

    2017-11-22

    Fullerenes are the most popular molecules to use in applications related to molecular electronics because of their superconductive nature. These molecules show a diverse range of properties, including optical, electronic, and structural characteristics. In this work, we focused on the electronic transport properties of molecular devices consisting of the fullerene B 40 or B 40 with different anchor atoms between two gold electrodes in a two-probe configuration. The elements used as anchor atoms in the B 40 molecules were oxygen, selenium, and sulfur, i.e., chalcogens. The current characteristics of these fullerene-based molecular devices were calculated and analyzed. The analysis highlighted the superior electrical conductivity of the pure B 40 device compared to the devices based on its chalcogen-anchored variants. The conductivities of the molecular devices were ranked as follows: pure B 40  > selenium-anchored > sulfur-anchored > oxygen-anchored B 40 . It was also noted that the devices based on B 40 and its chalcogen-anchored variants gave nonzero conductance values at zero bias. These results pave the way for the application of these molecules in future nanodevices utilizing extremely small bias voltages.

  15. The Holding Power of Anchors

    Indian Academy of Sciences (India)

    ton cutter Frolic. One thing is certain, however, the new anchor has no stock to foul the jib sheets when coming about, so that one continuously acting source of blasphemy will be removed. For the benefit of people who like to try new things, it is proposed to put this anchor on the market at the beginning of the coming season ...

  16. Not all Anchors Weigh Equally.

    Science.gov (United States)

    Greenstein, Michael; Velazquez, Alexandra

    2017-11-01

    The anchoring bias is a reliable effect wherein a person's judgments are affected by initially presented information, but it is unknown specifically why this effect occurs. Research examining this bias suggests that elements of both numeric and semantic priming may be involved. To examine this, the present research used a phenomenon wherein people treat numeric information presented differently in Arabic numeral or verbal formats. We presented participants with one of many forms of an anchor that represented the same value (e.g., twelve hundred or 1,200). Thus, we could examine how a concept's meaning and its absolute numeric value affect anchoring. Experiments 1 and 2 showed that people respond to Arabic and verbal anchors differently. Experiment 3 showed that these differences occurred largely because people tend to think of numbers in digit format. This suggests that one's conceptual understanding of the anchored information matters more than its strict numeric value.

  17. Sulfur Earth

    Science.gov (United States)

    de Jong, B. H.

    2007-12-01

    Variations in surface tension affect the buoyancy of objects floating in a liquid. Thus an object floating in water will sink deeper in the presence of dishwater fluid. This is a very minor but measurable effect. It causes for instance ducks to drown in aqueous solutions with added surfactant. The surface tension of liquid iron is very strongly affected by the presence of sulfur which acts as a surfactant in this system varying between 1.9 and 0.4 N/m at 10 mass percent Sulfur (Lee & Morita (2002), This last value is inferred to be the maximum value for Sulfur inferred to be present in the liquid outer core. Venting of Sulfur from the liquid core manifests itself on the Earth surface by the 105 to 106 ton of sulfur vented into the atmosphere annually (Wedepohl, 1984). Inspection of surface Sulfur emission indicates that venting is non-homogeneously distributed over the Earth's surface. The implication of such large variation in surface tension in the liquid outer core are that at locally low Sulfur concentration, the liquid outer core does not wet the predominantly MgSiO3 matrix with which it is in contact. However at a local high in Sulfur, the liquid outer core wets this matrix which in the fluid state has a surface tension of 0.4 N/m (Bansal & Doremus, 1986), couples with it, and causes it to sink. This differential and diapiric movement is transmitted through the essentially brittle mantle (1024 Pa.s, Lambeck & Johnson, 1998; the maximum value for ice being about 1030 Pa.s at 0 K, in all likely hood representing an upper bound of viscosity for all materials) and manifests itself on the surface by the roughly 20 km differentiation, about 0.1 % of the total mantle thickness, between topographical heights and lows with concomitant lateral movement in the crust and upper mantle resulting in thin skin tectonics. The brittle nature of the medium though which this movement is transmitted suggests that the extremes in topography of the D" layer are similar in range to

  18. Sulfur cycle

    Digital Repository Service at National Institute of Oceanography (India)

    LokaBharathi, P.A.

    energy. At the end of the anaerobic food chain in bacteria they serve to purify the system of sulfide and other metabolic end products. In the process sulfur is returned to the system as sulfate. In transition zones from anaerobic to aerobic...

  19. Nuclear fragmentation

    International Nuclear Information System (INIS)

    Chung, K.C.

    1989-01-01

    An introduction to nuclear fragmentation, with emphasis in percolation ideas, is presented. The main theoretical models are discussed and as an application, the uniform expansion approximation is presented and the statistical multifragmentation model is used to calculate the fragment energy spectra. (L.C.)

  20. Biologically produced sulfur

    NARCIS (Netherlands)

    Kleinjan, W.E.; Keizer, de A.; Janssen, A.J.H.

    2003-01-01

    Sulfur compound oxidizing bacteria produce sulfur as an intermediate in the oxidation of hydrogen sulfide to sulfate. Sulfur produced by these microorganisms can be stored in sulfur globules, located either inside or outside the cell. Excreted sulfur globules are colloidal particles which are

  1. Quantitative retrotransposon anchored PCR confirms transduction efficiency of transgenes in adult Schistosoma mansoni.

    Science.gov (United States)

    Rinaldi, Gabriel; Suttiprapa, Sutas; Brindley, Paul J

    2011-05-01

    A quantitative retrotransposon anchored PCR (qRAP) that utilizes endogenous retrotransposons as a chromosomal anchor was developed to investigate integration of transgenes in Schistosoma mansoni. The qRAP technique, which builds on earlier techniques, (i) Alu-PCR which has been used to quantify lentiviral (HIV-1) proviral insertions in human chromosomes and (ii) a non-quantitative retrotransposon anchored PCR known to detect the presence of transgenes in the S. mansoni genome, was tested here in a model comparison of retrovirus-transduced adult schistosomes in which one group included intact worms, the other included fragments of adult worms. At the outset, after transducing intact and viable fragments of schistosomes with reporter RNAs, we observed more reporter activity in fragments of worms than in intact worms. We considered this simply reflects the increased surface area in fragments compared to intact worms exposed to the exogenous reporter genes. Subsequently, intact worms and worm fragments were transduced with pseudotyped virions. Transgene integration events in genomic DNA extracted from the virion-exposed worms and worm fragments were quantified by the qRAP, which revealed that fragmenting adult schistosomes resulted in increased density of proviral integrations. The qRAP findings confirmed the likely value of this qRAP technique for quantification of transgenes integrated in schistosome chromosomes. Last, considering the absence of schistosome cell or tissue lines, primary culture of fragmented worms offers an opportunity to optimize transgenesis, and other functional genomic approaches. Copyright © 2011 Elsevier B.V. All rights reserved.

  2. Bone Anchored Hearing Aid

    Science.gov (United States)

    2002-01-01

    Executive Summary Objective The objective of this health technology policy assessment was to determine the effectiveness and cost-effectiveness of bone-anchored hearing aid (BAHA) in improving the hearing of people with conduction or mixed hearing loss. The Technology The (BAHA) is a bone conduction hearing device that includes a titanium fixture permanently implanted into the mastoid bone of the skull and an external percutaneous sound processor. The sound processor is attached to the fixture by means of a skin penetrating abutment. Because the device bypasses the middle ear and directly stimulates the cochlea, it has been recommended for individuals with conduction hearing loss or discharging middle ear infection. The titanium implant is expected to last a lifetime while the external sound processor is expected to last 5 years. The total initial device cost is approximately $5,300 and the external sound processor costs approximately $3,500. Review of BAHA by the Medical Advisory Secretariat The Medical Advisory Secretariat’s review is a descriptive synthesis of findings from 36 research articles published between January 1990 and May 2002. Summary of Findings No randomized controlled studies were found. The evidence was derived from level 4 case series with relative small sample sizes (ranging from 30-188). The majority of the studies have follow-up periods of eight years or longer. All except one study were based on monaural BAHA implant on the side with the best bone conduction threshold. Safety Level 4 evidence showed that BAHA has been be implanted safely in adults and children with success rates of 90% or higher in most studies. No mortality or life threatening morbidity has been reported. Revision rates for tissue reduction or resiting were generally under 10% for adults but have been reported to be as high as 25% in pediatric studies. Adverse skin reaction around the skin penetration site was the most common complication reported. Most of these

  3. Sulfur metabolism in phototrophic sulfur bacteria

    DEFF Research Database (Denmark)

    Frigaard, Niels-Ulrik; Dahl, Christiane

    2008-01-01

    Phototrophic sulfur bacteria are characterized by oxidizing various inorganic sulfur compounds for use as electron donors in carbon dioxide fixation during anoxygenic photosynthetic growth. These bacteria are divided into the purple sulfur bacteria (PSB) and the green sulfur bacteria (GSB......). They utilize various combinations of sulfide, elemental sulfur, and thiosulfate and sometimes also ferrous iron and hydrogen as electron donors. This review focuses on the dissimilatory and assimilatory metabolism of inorganic sulfur compounds in these bacteria and also briefly discusses these metabolisms...... in other types of anoxygenic phototrophic bacteria. The biochemistry and genetics of sulfur compound oxidation in PSB and GSB are described in detail. A variety of enzymes catalyzing sulfur oxidation reactions have been isolated from GSB and PSB (especially Allochromatium vinosum, a representative...

  4. Sulfuric acid-sulfur heat storage cycle

    Science.gov (United States)

    Norman, John H.

    1983-12-20

    A method of storing heat is provided utilizing a chemical cycle which interconverts sulfuric acid and sulfur. The method can be used to levelize the energy obtained from intermittent heat sources, such as solar collectors. Dilute sulfuric acid is concentrated by evaporation of water, and the concentrated sulfuric acid is boiled and decomposed using intense heat from the heat source, forming sulfur dioxide and oxygen. The sulfur dioxide is reacted with water in a disproportionation reaction yielding dilute sulfuric acid, which is recycled, and elemental sulfur. The sulfur has substantial potential chemical energy and represents the storage of a significant portion of the energy obtained from the heat source. The sulfur is burned whenever required to release the stored energy. A particularly advantageous use of the heat storage method is in conjunction with a solar-powered facility which uses the Bunsen reaction in a water-splitting process. The energy storage method is used to levelize the availability of solar energy while some of the sulfur dioxide produced in the heat storage reactions is converted to sulfuric acid in the Bunsen reaction.

  5. The Holding Power of Anchors

    Indian Academy of Sciences (India)

    as the chain begins to drag along the ground; and it also serves, by lying flat on the ground, to keep the palm set at the correct angle as it buries itself. In stockless anchors there are two digging blades set on opposite sides of the shank, and hinged to it by a horizontal hinge which allows them to set themselves at the correct.

  6. Chameleon fragmentation

    International Nuclear Information System (INIS)

    Brax, Philippe; Upadhye, Amol

    2014-01-01

    A scalar field dark energy candidate could couple to ordinary matter and photons, enabling its detection in laboratory experiments. Here we study the quantum properties of the chameleon field, one such dark energy candidate, in an ''afterglow'' experiment designed to produce, trap, and detect chameleon particles. In particular, we investigate the possible fragmentation of a beam of chameleon particles into multiple particle states due to the highly non-linear interaction terms in the chameleon Lagrangian. Fragmentation could weaken the constraints of an afterglow experiment by reducing the energy of the regenerated photons, but this energy reduction also provides a unique signature which could be detected by a properly-designed experiment. We show that constraints from the CHASE experiment are essentially unaffected by fragmentation for φ 4 and 1/φ potentials, but are weakened for steeper potentials, and we discuss possible future afterglow experiments

  7. Chameleon fragmentation

    Energy Technology Data Exchange (ETDEWEB)

    Brax, Philippe [Institut de Physique Théorique, CEA, IPhT, CNRS, URA 2306, F-91191Gif/Yvette Cedex (France); Upadhye, Amol, E-mail: philippe.brax@cea.fr, E-mail: aupadhye@anl.gov [Institute for the Early Universe, Ewha University, International Education, Building #601, 11-1, Daehyun-Dong Seodaemun-Gu, Seoul 120-750 (Korea, Republic of)

    2014-02-01

    A scalar field dark energy candidate could couple to ordinary matter and photons, enabling its detection in laboratory experiments. Here we study the quantum properties of the chameleon field, one such dark energy candidate, in an ''afterglow'' experiment designed to produce, trap, and detect chameleon particles. In particular, we investigate the possible fragmentation of a beam of chameleon particles into multiple particle states due to the highly non-linear interaction terms in the chameleon Lagrangian. Fragmentation could weaken the constraints of an afterglow experiment by reducing the energy of the regenerated photons, but this energy reduction also provides a unique signature which could be detected by a properly-designed experiment. We show that constraints from the CHASE experiment are essentially unaffected by fragmentation for φ{sup 4} and 1/φ potentials, but are weakened for steeper potentials, and we discuss possible future afterglow experiments.

  8. Intermediate Fragment

    DEFF Research Database (Denmark)

    Kruse Aagaard, Anders

    2015-01-01

    ‘Engaging Through Architecture’ in 2015 by Aarhus School of Architecture as a part of the Ventura Lambrate Milan Design Week, where it was exhibited under the name Concrete. The fundamental pool of techniques and knowledge that set the agenda for the fragment was established before the intentions...

  9. Framing Fragmentation

    DEFF Research Database (Denmark)

    Bundgaard, Charlotte

    2009-01-01

    to create architectural meaning and give character to an architecture of fragmentation. Layers are both seen as conceptual as well as material frames which define certain strong properties or meanings in the architectural work. Defining layers is a way of separating and organizing; it both defines...

  10. Rock fragmentation

    Energy Technology Data Exchange (ETDEWEB)

    Brown, W.S.; Green, S.J.; Hakala, W.W.; Hustrulid, W.A.; Maurer, W.C. (eds.)

    1976-01-01

    Experts in rock mechanics, mining, excavation, drilling, tunneling and use of underground space met to discuss the relative merits of a wide variety of rock fragmentation schemes. Information is presented on novel rock fracturing techniques; tunneling using electron beams, thermocorer, electric spark drills, water jets, and diamond drills; and rock fracturing research needs for mining and underground construction. (LCL)

  11. Nominal Anchors in the CIS

    OpenAIRE

    Peter M Keller; Thomas J Richardson

    2003-01-01

    Monetary policy has become increasingly important in the countries of the Commonwealth of Independent States (CIS) as fiscal adjustment and structural reforms have taken root. Inflation has been brought down to relatively low levels in almost all of these countries, raising the question of what should be the appropriate nominal anchor at this stage. Formally, almost all CIS countries have floating exchange rate regimes, yet in practice they manage their exchange rates very heavily, perhaps be...

  12. [Bone-anchored auricular prosthesis].

    Science.gov (United States)

    Bille, M; Homøe, P; Vesterhauge, S; Rixen, M; Bretlau, P

    1994-10-03

    During the period February 1989-September 1991, 15 patients with absent or defective pinna were treated with a bone-anchored auricular prosthesis at the ENT-department, Rigshospitalet, Copenhagen. These patients were followed up from the hospital records and by means of a questionnaire. Altogether 40 titanium implants have been inserted, of which one implant was found not to be integrated at the time of the second-stage surgery. Five patients underwent additional surgery, one patient because of non-integration of a screw, and four patients on account of soft-tissue reactions. From the questionnaire replies it appears that all patients found the cosmetic result and the technique concerning mounting of the prosthesis very satisfactory. Nearly half the patients found that the care of the skin around the abutments caused considerable problems. Three patients had experienced unintended losses of the prosthesis. In conclusion, treatment with a bone anchored auricular prosthesis has considerable advantages compared to treatment with a prosthesis attached by adhesive. Furthermore the use of a bone-anchored prosthesis should be considered a viable alternative to surgical reconstruction because of the outstanding aesthetic result and because the surgical procedure puts less strain on the patient. The disadvantage of the method is the lifelong daily care of the skin and the dependence on the health services.

  13. Fragmented Authoritarianism or Integrated Fragmentation

    DEFF Research Database (Denmark)

    Brødsgaard, Kjeld Erik

    or from a position as business leader to a position in the state apparatus or in the Party and vice versa. To conceptualize the coexistence of the contradicting forces for further enterprise autonomy and continued central control that characterizes the evolving relationship between business groups...... and the Party-state, I suggest the notion of integrated fragmentation....

  14. Solubility of Sulfur Dioxide in Sulfuric Acid

    Science.gov (United States)

    Chang, K. K.; Compton, L. E.; Lawson, D. D.

    1982-01-01

    The solubility of sulfur dioxide in 50% (wt./wt.) sulfuric acid was evaluated by regular solution theory, and the results verified by experimental measurements in the temperature range of 25 C to 70 C at pressures of 60 to 200 PSIA. The percent (wt./wt.) of sulfur dioxide in 50% (wt./wt.) sulfuric acid is given by the equation %SO2 = 2.2350 + 0.0903P - 0.00026P 10 to the 2nd power with P in PSIA.

  15. Sulfuric acid poisoning

    Science.gov (United States)

    Sulfuric acid is a very strong chemical that is corrosive. Corrosive means it can cause severe burns and ... or mucous membranes. This article discusses poisoning from sulfuric acid. This article is for information only. Do NOT ...

  16. Fragmentation based

    Directory of Open Access Journals (Sweden)

    Shashank Srivastava

    2014-01-01

    Gaining the understanding of mobile agent architecture and the security concerns, in this paper, we proposed a security protocol which addresses security with mitigated computational cost. The protocol is a combination of self decryption, co-operation and obfuscation technique. To circumvent the risk of malicious code execution in attacking environment, we have proposed fragmentation based encryption technique. Our encryption technique suits the general mobile agent size and provides hard and thorny obfuscation increasing attacker’s challenge on the same plane providing better performance with respect to computational cost as compared to existing AES encryption.

  17. Architectural fragments

    DEFF Research Database (Denmark)

    Bang, Jacob Sebastian

    2018-01-01

    the photographs as a starting point for a series of paintings. This way of creating representations of something that already exists is for me to see a way forward in the "decoding" of my own models into other depictions. The models are analyzed through a series of representations in different types of drawings....... I try to invent the ways of drawing the models - that decode and unfold them into architectural fragments- into future buildings or constructions in the landscape. [1] Luigi Moretti: Italian architect, 1907 - 1973 [2] Man Ray: American artist, 1890 - 1976. in 2015, I saw the wonderful exhibition...

  18. [Treatment of calcaneal avulsion fractures with twinfix suture anchors fixation].

    Science.gov (United States)

    Zhao, Bin-xiu; Wang, Kun-zheng; Wang, Chun-sheng; Xie, Yue; Dai, Zhi-tang; Liu, Gang; Liu, Wei-dong

    2011-06-01

    For the calcaneal avulsion fracture, the current method is more commonly used screws or Kirschner wire to fix fracture fragment. This article intended to explore the feasibility and clinical efficacy for the treatment of avulsion fractures with TwinFix suture anchors. From July 2007 to November 2010, 21 patients were reviewed, including 15 males and 6 females, ranging in age from 49 to 65 years,with a mean of 58.7 years. Twelve patients had nodules in the right heel and 9 patients had nodules in the left heel. All the patients had closed fractures. The typical preoperative symptoms of the patients included pain in the upper heel and weak in heel lift. Body examination results: palpable sense of bone rubbing in the back of the heel, and swelling in the heel. Surgery treatment with TwinFix suture anchors performed as follows : to fix TwinFix suture anchors into the calcaneal body, then to drill the fracture block, to make the double strand suture through the fracture holes, to knot the suture eachother to fix the block, and to use stitch to fix the remaining suture in the Achilles tendon in order to improve the block fixation. The criteria of the AOFAS Foot and Ankle Surgery by the United States Association of ankle-rear foot functional recovery was used to evaluate the Achilles tendon. Total average score was (95.5 +/- 3.12) points, including pain items of(38.5 +/- 2.18) points,the average score of functional items of (49.5 +/- 3.09) points,and power lines of 10 points in all patients. Twenty-one patients got an excellent result, 16 good and 5 poor. The methods of treatment for the calcaneal avulsion fractures with TwinFix suture anchors is a simple operation, and have excellent clinical effect, which is worthy of promotion.

  19. Sulfuric acid on Europa and the radiolytic sulfur cycle

    Science.gov (United States)

    Carlson, R. W.; Johnson, R. E.; Anderson, M. S.

    1999-01-01

    A comparison of laboratory spectra with Galileo data indicates that hydrated sulfuric acid is present and is a major component of Europa's surface. In addition, this moon's visually dark surface material, which spatially correlates with the sulfuric acid concentration, is identified as radiolytically altered sulfur polymers. Radiolysis of the surface by magnetospheric plasma bombardment continuously cycles sulfur between three forms: sulfuric acid, sulfur dioxide, and sulfur polymers, with sulfuric acid being about 50 times as abundant as the other forms. Enhanced sulfuric acid concentrations are found in Europa's geologically young terrains, suggesting that low-temperature, liquid sulfuric acid may influence geological processes.

  20. Sulfur-Containing Agrochemicals.

    Science.gov (United States)

    Devendar, Ponnam; Yang, Guang-Fu

    2017-10-09

    Modern agricultural chemistry has to support farmers by providing innovative agrochemicals. In this context, the introduction of sulfur atoms into an active ingredient is still an important tool in modulating the properties of new crop-protection compounds. More than 30% of today's agrochemicals contain at least one sulfur atom, mainly in fungicides, herbicides and insecticides. A number of recently developed sulfur-containing agrochemical candidates represent a novel class of chemical compounds with new modes of action, so we intend to highlight the emerging interest in commercially active sulfur-containing compounds. This chapter gives a comprehensive overview of selected leading sulfur-containing pesticidal chemical families namely: sulfonylureas, sulfonamides, sulfur-containing heterocyclics, thioureas, sulfides, sulfones, sulfoxides and sulfoximines. Also, the most suitable large-scale synthetic methods of the recently launched or provisionally approved sulfur-containing agrochemicals from respective chemical families have been highlighted.

  1. Suction anchors for floating production systems

    Energy Technology Data Exchange (ETDEWEB)

    Tjelta, T.I.; Rusas, P. [Statoil a.s. (Norway); Edvardsen, G. [HEX a.s. (Norway)

    1996-12-31

    Since the suction anchor is a recent development in its current use, this work provides a brief historical background. It is shown that the suction anchor throughout evolution today is a competitive foundation solution for many applications. Examples from these categories are included in this paper. Also several installation methods are discussed. 3 refs., 7 figs., 2 tabs.

  2. Anchors of Religious Commitment in Adolescents

    Science.gov (United States)

    Layton, Emily; Dollahite, David C.; Hardy, Sam A.

    2011-01-01

    This study explores adolescent religious commitment using qualitative data from a religiously diverse (Jewish, Christian, Muslim) sample of 80 adolescents. A new construct, "anchors of religious commitment," grounded in interview data, is proposed to describe what adolescents commit to as a part of their religious identity. Seven anchors of…

  3. 21 CFR 872.3130 - Preformed anchor.

    Science.gov (United States)

    2010-04-01

    ... DEVICES DENTAL DEVICES Prosthetic Devices § 872.3130 Preformed anchor. (a) Identification. A preformed anchor is a device made of austenitic alloys or alloys containing 75 percent or greater gold or metals of the platinum group intended to be incorporated into a dental appliance, such as a denture, to help...

  4. Fragmented Authoritarianism or Integrated Fragmentation

    DEFF Research Database (Denmark)

    Brødsgaard, Kjeld Erik

    proved their influence by obstructing the creation of new ministries and regulatory commissions that would limit their powers. The heads of these business groups often outrank their counterparts in state administrative organs and bureaus that are supposed to regulate their activities. The increased role...... of these business leaders prompts the question of whether we are seeing the development of distinct interest groups that could challenge Party and state authority and create a fragmented polity. However, through the nomenklatura system the Party has an important instrument of control to wield over business groups....... Through this system the Party controls the appointment and promotion of the heads of the most important state-owned enterprises. The nomenklatura system also enables the Party to rotate leaders in big business from a position as CEO in one company to a similar position in another state-owned company...

  5. Sulfur polymer cement concrete

    International Nuclear Information System (INIS)

    Weber, H.H.; McBee, W.C.

    1990-01-01

    Sulfur-based composite materials formulated using sulfur polymer cement (SPC) and mineral aggregates are described and compared with conventional portland cement based materials. Materials characteristics presented include mechanical strength, chemical resistance, impact resistance, moisture permeation, and linear shrinkage during placement and curing. Examples of preparation and placement of sulfur polymer cement concrete (SC) are described using commercial scale equipment. SC applications presented are focused into hostile chemical environments where severe portland cement concrete (PCC) failure has occurred

  6. ADVANCED SULFUR CONTROL CONCEPTS

    Energy Technology Data Exchange (ETDEWEB)

    Apostolos A. Nikolopoulos; Santosh K. Gangwal; William J. McMichael; Jeffrey W. Portzer

    2003-01-01

    Conventional sulfur removal in integrated gasification combined cycle (IGCC) power plants involves numerous steps: COS (carbonyl sulfide) hydrolysis, amine scrubbing/regeneration, Claus process, and tail-gas treatment. Advanced sulfur removal in IGCC systems involves typically the use of zinc oxide-based sorbents. The sulfides sorbent is regenerated using dilute air to produce a dilute SO{sub 2} (sulfur dioxide) tail gas. Under previous contracts the highly effective first generation Direct Sulfur Recovery Process (DSRP) for catalytic reduction of this SO{sub 2} tail gas to elemental sulfur was developed. This process is currently undergoing field-testing. In this project, advanced concepts were evaluated to reduce the number of unit operations in sulfur removal and recovery. Substantial effort was directed towards developing sorbents that could be directly regenerated to elemental sulfur in an Advanced Hot Gas Process (AHGP). Development of this process has been described in detail in Appendices A-F. RTI began the development of the Single-step Sulfur Recovery Process (SSRP) to eliminate the use of sorbents and multiple reactors in sulfur removal and recovery. This process showed promising preliminary results and thus further process development of AHGP was abandoned in favor of SSRP. The SSRP is a direct Claus process that consists of injecting SO{sub 2} directly into the quenched coal gas from a coal gasifier, and reacting the H{sub 2}S-SO{sub 2} mixture over a selective catalyst to both remove and recover sulfur in a single step. The process is conducted at gasifier pressure and 125 to 160 C. The proposed commercial embodiment of the SSRP involves a liquid phase of molten sulfur with dispersed catalyst in a slurry bubble-column reactor (SBCR).

  7. Toxicokinetics of sulfur mustard

    NARCIS (Netherlands)

    Langenberg, J.P.; Schans, M.J. van der; Noort, D.

    2016-01-01

    In this chapter an overview is presented on the state of knowledge concerning the toxicokinetics of sulfur mustard. The procedures to analyze intact sulfur mustard in the blood and tissues of laboratory animals at toxicologically relevant levels are discussed. In view of the fact that the reviewed

  8. Nanostructured sulfur cathodes

    KAUST Repository

    Yang, Yuan

    2013-01-01

    Rechargeable Li/S batteries have attracted significant attention lately due to their high specific energy and low cost. They are promising candidates for applications, including portable electronics, electric vehicles and grid-level energy storage. However, poor cycle life and low power capability are major technical obstacles. Various nanostructured sulfur cathodes have been developed to address these issues, as they provide greater resistance to pulverization, faster reaction kinetics and better trapping of soluble polysulfides. In this review, recent developments on nanostructured sulfur cathodes and mechanisms behind their operation are presented and discussed. Moreover, progress on novel characterization of sulfur cathodes is also summarized, as it has deepened the understanding of sulfur cathodes and will guide further rational design of sulfur electrodes. © 2013 The Royal Society of Chemistry.

  9. Anchoring effects on early autobiographical memories.

    Science.gov (United States)

    Greenberg, Daniel L; Bishara, Anthony J; Mugayar-Baldocchi, Marino A

    2017-10-01

    Studies of childhood memory typically show that our earliest memories come from between three and four years of age. This finding is not universal, however. The age estimate varies across cultures and is affected by social influences. Research from the judgments and decision-making literature suggests that these estimates might also involve a judgment under uncertainty. Therefore, they might be susceptible to less social influences such as heuristics and biases. To investigate this possibility, we conducted two experiments that used anchoring paradigms to influence participants' estimates of their age during early autobiographical memories. In Experiment 1, participants answered either a high-anchor or a low-anchor question, and were warned that the anchor was uninformative; they went on to estimate their age during their earliest autobiographical memory. In Experiment 2, we replicated Experiment 1 and extended the design to examine additional early autobiographical memories. In both experiments, participants in the low-anchor condition gave earlier age estimates than those in the high-anchor condition. These results provide new insights into the methods used to investigate autobiographical memory. Moreover, they show that reports of early autobiographical memories can be influenced by a relatively light touch - a change to a single digit in a single question.

  10. The Use of Comics-Based Cases in Anchored Instruction

    Science.gov (United States)

    Kneller, Matthew F.

    2009-01-01

    The primary purpose of this research was to understand how comics fulfill the role of anchor in an anchored instruction learning environment. Anchored instruction addresses the inert knowledge problem through the use of realistic multimedia stories, or "anchors," that embed a problem and the necessary data to solve it within the narrative. In the…

  11. Sulfuric Acid on Europa

    Science.gov (United States)

    1999-01-01

    Frozen sulfuric acid on Jupiter's moon Europa is depicted in this image produced from data gathered by NASA's Galileo spacecraft. The brightest areas, where the yellow is most intense, represent regions of high frozen sulfuric acid concentration. Sulfuric acid is found in battery acid and in Earth's acid rain. This image is based on data gathered by Galileo's near infrared mapping spectrometer.Europa's leading hemisphere is toward the bottom right, and there are enhanced concentrations of sulfuric acid in the trailing side of Europa (the upper left side of the image). This is the face of Europa that is struck by sulfur ions coming from Jupiter's innermost moon, Io. The long, narrow features that crisscross Europa also show sulfuric acid that may be from sulfurous material extruded in cracks. Galileo, launched in 1989, has been orbiting Jupiter and its moons since December 1995. JPL manages the Galileo mission for NASA's Office of Space Science, Washington DC. JPL is a division of the California Institute of Technology, Pasadena, CA.

  12. Preservation of organic matter on Mars by sulfur

    Science.gov (United States)

    Eigenbrode, J. L.; Steele, A.; Summons, R. E.; McAdam, A.; Sutter, B.; Franz, H. B.; Freissinet, C.; Millan, M.; Glavin, D. P.; Szopa, C.; Conrad, P. G.; Mahaffy, P. R.

    2016-12-01

    Deltaic-lacustrine mudstones at Pahrump Hills, Gale Crater, Mars yielded a variety of sulfur-containing volatiles upon heating to 500-860°C, as detected by the Sample Analysis at Mars (SAM) instrument onboard the Curiosity rover. The detection of organosulfur compounds comprising thiophenes, dimethylsulfide and thiols by gas chromatography-mass spectrometry and evolved gas analyses, together with aromatic and other hydrocarbon molecules with distributions specific to the sample (i.e., not from the SAM background) indicate that some or all of these organic fragments released at high temperatures are indigenous to the mudstones. The organosulfur compounds are most likely derived from sulfur organics in the sediments. However, there is a possibility that sulfurization of some organic fragments occurred in the oven. On Earth, sulfurization of organic matter is a key process that aids preservation over geological time-scales. This is because it reduces reactive functional groups and adds cross links between small unstable molecules thereby converting them into recalcitrant macromolecules. Sulfurization of organic materials prior to deposition and during early diagenesis may have been a key mechanism responsible for organic matter preservation in the Murray formation mudstones. Sulfur-bearing organics have also been observed in carbonaceous meteorites and there is indication of their presence in the Tissint martian meteorite. A quantitative assessment of organosulfur compounds relative to their non-organic counterparts will be presented for the Murray formation mudstones analyzed by SAM and meteorites analyzed in the laboratory under similar analytical conditions.

  13. arene derivatives anchoring four thiadiazole groups

    Indian Academy of Sciences (India)

    Administrator

    53(3) Å, respectively. The four sulfur atoms on thiacalix[4]arene skeleton lie in the same plane with a mean deviation of 0.08 Å. The distance between two opposite sulfur atoms as well as oxygen atoms are 7⋅93(3) Å, 7⋅87(3) Å,. Figure 1.

  14. Career anchors and learning plan (part one

    Directory of Open Access Journals (Sweden)

    Daniela Brečko

    2006-12-01

    Full Text Available The article is divided into three parts. The first part concentrates on how important career is for an individual, organization and society. The author establishes that understanding of career has changed dramatically and does not only refer to climbing up the career ladder, but also moving off or even down the career ladder. The notion of career, as a lifelong and professional path, encompasses all aspects of human personality and their roles acquired through one's life. On basis of vast and longitudinal research, where the author has studied career anchors of individuals, it is the objective of the author to find out on basis of what grounds do the individuals decide to take certain directions in their careers and how learning contributes to such decisions. As a source the author has used Shein's theory of career anchors. Part one describes in greater detail 8 different career anchors and introduces their main features with the findings of the research, which refer to the analysis of professions (work positions and established career anchors. The author thus verifies the hypothesis that career anchors do exist in our area.

  15. Ultimate load capacities of expansion anchor bolts

    International Nuclear Information System (INIS)

    Czarnecki, R.M.; Manrique, M.A.; Samaddar, S.K.

    1993-01-01

    A summary of available experimental expansion anchor bolt test data is presented. These data were collected as part of programs by the nuclear industry to address generic issues related to verification of seismic adequacy of equipment in nuclear power plants. Some of the data presented are suitable for use in seismic probabilistic risk assessments. For example, mean values of ultimate strength, along with their standard deviation and coefficients of variation, for a range of most typical expansion anchor bolt sizes are presented. Effects of interaction between shear and tension, edge distance, spacing, and cracking of the concrete are presented in a manner that is more suitable for use in deterministic evaluations. Related industry programs to derive anchor bolt capacities are briefly discussed. Recommendations for areas of further investigation are also presented

  16. Arthroscopic double-row suture anchor fixation of minimally displaced greater tuberosity fractures.

    Science.gov (United States)

    Ji, Jong-Hun; Kim, Weon-Yoo; Ra, Ki-Hang

    2007-10-01

    In cases of displaced greater tuberosity fractures, treatments by arthroscopic-assisted reduction and percutaneous screw fixation have been reported. However, in cases in which there is a comminuted fracture or a minimally displaced fracture combined with concomitant lesions such as rotator cuff tear or labral pathology, it is difficult to reduce the fracture and to treat other pathologies by use of a percutaneous screw. Recently, many surgeons have used the double-row repair method in rotator cuff repair, which provides a tendon-bone interface better suited for biologic healing and restoring normal anatomy. In accordance with this method, we used the arthroscopic technique of double-row suture anchor fixation for a minimally displaced greater tuberosity fracture without additional incision. Initially, debridement was performed on the fracture surface by use of a shaver, and the medial-row anchor was inserted through the anterior portal or the intact cuff. Two lateral-row anchors were inserted just anterior and posterior to the lower margin of the fractured fragment under C-arm guidance. The medial-row sutures and lateral-row sutures were then placed. Arthroscopic double-row suture anchor fixation of a displaced greater tuberosity fracture restores the original footprint of the rotator cuff and normal tendon-bone interface of the displaced greater tuberosity fracture.

  17. 3D dual-confined sulfur encapsulated in porous carbon nanosheets and wrapped with graphene aerogels as a cathode for advanced lithium sulfur batteries

    Science.gov (United States)

    Hou, Yang; Li, Jianyang; Gao, Xianfeng; Wen, Zhenhai; Yuan, Chris; Chen, Junhong

    2016-04-01

    Although lithium-sulfur (Li-S) batteries have attracted much attention due to their high theoretical specific energy and low cost, their practical applications have been severely hindered by poor cycle life, inadequate sulfur utilization, and the insulating nature of sulfur. Here, we report a rationally designed Li-S cathode with a dual-confined configuration formed by confining sulfur in 2D carbon nanosheets with an abundant porous structure followed by 3D graphene aerogel wrapping. The porous carbon nanosheets act as the sulfur host and suppress the diffusion of polysulfide, while the graphene conductive networks anchor the sulfur-adsorbed carbon nanosheets, providing pathways for rapid electron/ion transport and preventing polysulfide dissolution. As a result, the hybrid electrode exhibits superior electrochemical performance, including a large reversible capacity of 1328 mA h g-1 in the first cycle, excellent cycling stability (maintaining a reversible capacity of 647 mA h g-1 at 0.2 C after 300 cycles) with nearly 100% Coulombic efficiency, and a high rate capability of 512 mA h g-1 at 8 C for 30 cycles, which is among the best reported rate capabilities.Although lithium-sulfur (Li-S) batteries have attracted much attention due to their high theoretical specific energy and low cost, their practical applications have been severely hindered by poor cycle life, inadequate sulfur utilization, and the insulating nature of sulfur. Here, we report a rationally designed Li-S cathode with a dual-confined configuration formed by confining sulfur in 2D carbon nanosheets with an abundant porous structure followed by 3D graphene aerogel wrapping. The porous carbon nanosheets act as the sulfur host and suppress the diffusion of polysulfide, while the graphene conductive networks anchor the sulfur-adsorbed carbon nanosheets, providing pathways for rapid electron/ion transport and preventing polysulfide dissolution. As a result, the hybrid electrode exhibits superior

  18. Aircraft exhaust sulfur emissions

    Energy Technology Data Exchange (ETDEWEB)

    Brown, R.C.; Anderson, M.R.; Miake-Lye, R.C.; Kolb, C.E. [Aerodyne Research, Inc., Billerica, MA (United States). Center for Chemical and Environmental Physics; Sorokin, A.A.; Buriko, Y.I. [Scientific Research Center `Ecolen`, Moscow (Russian Federation)

    1997-12-31

    The extent to which fuel sulfur is converted to SO{sub 3} during combustion and the subsequent turbine flow in supersonic and subsonic aircraft engines is estimated numerically. The analysis is based on: a flamelet model with non-equilibrium sulfur chemistry for the combustor, and a one-dimensional, two-stream model with finite rate chemical kinetics for the turbine. The results indicate that between 2% and 10% of the fuel sulfur is emitted as SO{sub 3}. It is also shown that, for a high fuel sulfur mass loading, conversion in the turbine is limited by the level of atomic oxygen at the combustor exit, leading to higher SO{sub 2} oxidation efficiency at lower fuel sulfur loadings. While SO{sub 2} and SO{sub 3} are the primary oxidation products, the model results further indicate H{sub 2}SO{sub 4} levels on the order of 0.1 ppm for supersonic expansions through a divergent nozzle. This source of fully oxidized S(6) (SO{sub 3} + H{sub 2}SO{sub 4}) exceeds previously calculated S(6) levels due to oxidation of SO{sub 2} by OH in the exhaust plume outside the engine nozzle. (author) 26 refs.

  19. Monogenean anchor morphometry: systematic value, phylogenetic signal, and evolution

    Directory of Open Access Journals (Sweden)

    Tsung Fei Khang

    2016-02-01

    Full Text Available Background. Anchors are one of the important attachment appendages for monogenean parasites. Common descent and evolutionary processes have left their mark on anchor morphometry, in the form of patterns of shape and size variation useful for systematic and evolutionary studies. When combined with morphological and molecular data, analysis of anchor morphometry can potentially answer a wide range of biological questions. Materials and Methods. We used data from anchor morphometry, body size and morphology of 13 Ligophorus (Monogenea: Ancyrocephalidae species infecting two marine mugilid (Teleostei: Mugilidae fish hosts: Moolgarda buchanani (Bleeker and Liza subviridis (Valenciennes from Malaysia. Anchor shape and size data (n = 530 were generated using methods of geometric morphometrics. We used 28S rRNA, 18S rRNA, and ITS1 sequence data to infer a maximum likelihood phylogeny. We discriminated species using principal component and cluster analysis of shape data. Adams’s Kmult was used to detect phylogenetic signal in anchor shape. Phylogeny-correlated size and shape changes were investigated using continuous character mapping and directional statistics, respectively. We assessed morphological constraints in anchor morphometry using phylogenetic regression of anchor shape against body size and anchor size. Anchor morphological integration was studied using partial least squares method. The association between copulatory organ morphology and anchor shape and size in phylomorphospace was used to test the Rohde-Hobbs hypothesis. We created monogeneaGM, a new R package that integrates analyses of monogenean anchor geometric morphometric data with morphological and phylogenetic data. Results. We discriminated 12 of the 13 Ligophorus species using anchor shape data. Significant phylogenetic signal was detected in anchor shape. Thus, we discovered new morphological characters based on anchor shaft shape, the length between the inner root point and the

  20. Monogenean anchor morphometry: systematic value, phylogenetic signal, and evolution.

    Science.gov (United States)

    Khang, Tsung Fei; Soo, Oi Yoon Michelle; Tan, Wooi Boon; Lim, Lee Hong Susan

    2016-01-01

    Background. Anchors are one of the important attachment appendages for monogenean parasites. Common descent and evolutionary processes have left their mark on anchor morphometry, in the form of patterns of shape and size variation useful for systematic and evolutionary studies. When combined with morphological and molecular data, analysis of anchor morphometry can potentially answer a wide range of biological questions. Materials and Methods. We used data from anchor morphometry, body size and morphology of 13 Ligophorus (Monogenea: Ancyrocephalidae) species infecting two marine mugilid (Teleostei: Mugilidae) fish hosts: Moolgarda buchanani (Bleeker) and Liza subviridis (Valenciennes) from Malaysia. Anchor shape and size data (n = 530) were generated using methods of geometric morphometrics. We used 28S rRNA, 18S rRNA, and ITS1 sequence data to infer a maximum likelihood phylogeny. We discriminated species using principal component and cluster analysis of shape data. Adams's K mult was used to detect phylogenetic signal in anchor shape. Phylogeny-correlated size and shape changes were investigated using continuous character mapping and directional statistics, respectively. We assessed morphological constraints in anchor morphometry using phylogenetic regression of anchor shape against body size and anchor size. Anchor morphological integration was studied using partial least squares method. The association between copulatory organ morphology and anchor shape and size in phylomorphospace was used to test the Rohde-Hobbs hypothesis. We created monogeneaGM, a new R package that integrates analyses of monogenean anchor geometric morphometric data with morphological and phylogenetic data. Results. We discriminated 12 of the 13 Ligophorus species using anchor shape data. Significant phylogenetic signal was detected in anchor shape. Thus, we discovered new morphological characters based on anchor shaft shape, the length between the inner root point and the outer root

  1. Heat-Conducting Anchors for Thermocouples

    Science.gov (United States)

    Macdavid, Kenton S.

    1987-01-01

    Metal particles in adhesive aid heat transfer. Aluminum caps containing silver-filled epoxy used as high-thermal-conductance anchors for thermocouples, epoxy providing thermal path between mounting surfaces and thermocouple measuring junctions. Normally, epoxy-filled aluminum caps used when measuring steady-state temperatures. Silver-filled epoxy used when thermocouple not isolated electrically from surface measured.

  2. Anchoring Singapore Philanthropy in Southeast Asia | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Anchoring Singapore Philanthropy in Southeast Asia. Philanthropy in Singapore has traditionally had a charitable and local orientation. However, given the country's growing wealth and strong ties (trade, investment, migration) with its less advantaged neighbours, it is expected that considerable philanthropic capital will ...

  3. Anchoring Singapore Philanthropy in Southeast Asia | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Anchoring Singapore Philanthropy in Southeast Asia. Philanthropy in Singapore has traditionally had a charitable and local orientation. However, given the country's growing wealth and strong ties (trade, investment, migration) with its less advantaged neighbours, it is expected that considerable philanthropic capital will ...

  4. The bone-anchored hearing aid

    DEFF Research Database (Denmark)

    Foghsgaard, Søren

    2014-01-01

    The bone-anchored hearing aid (Baha) was introduced in 1977 by Tjellström and colleagues and has now been used clinically for over 30 years. Generally, the outcomes are good, and several studies have shown improved audiological- and quality of life outcomes. The principle of the Baha is, that sound...

  5. Anchoring the Panic Disorder Severity Scale

    Science.gov (United States)

    Keough, Meghan E.; Porter, Eliora; Kredlow, M. Alexandra; Worthington, John J.; Hoge, Elizabeth A.; Pollack, Mark H.; Shear, M. Katherine; Simon, Naomi M.

    2012-01-01

    The Panic Disorder Severity Scale (PDSS) is a clinician-administered measure of panic disorder symptom severity widely used in clinical research. This investigation sought to provide clinically meaningful anchor points for the PDSS both in terms of clinical severity as measured by the Clinical Global Impression-Severity Scale (CGI-S) and to extend…

  6. Chemical biology of Glycosylphosphatidylinositol (GPI) anchors

    Indian Academy of Sciences (India)

    Admin

    CSIR-IIIM. Chemical biology of. Glycosylphosphatidylinositol (GPI) anchors. Ram Vishwakarma. CSIR-Indian Institute of Integrative Medicine, Jammu. N ti l I tit t f I l. N. D lhi. National Institute of Immunology, New Delhi. Piramal Life Sciences Ltd, Mumbai ...

  7. Sulfur activation in Hiroshima

    International Nuclear Information System (INIS)

    Kerr, G.D.; Pace, J.V. III.

    1987-01-01

    In 1979, we attempted to establish the validity of source terms for the Hiroshima and Nagasaki bombs using experimental data on sulfur activation. Close agreement was observed between measured and calculated values for test firings of Nagasaki-type bombs. The calculated values were based on source terms developed by W.E. Preeg at the Los Alamos National Laboratory (LANL). A discrepancy was found, however, when we compared calculated values for the two bombs because a 1956 report by R.R. Wilson stated that sulfur acitvation by fast neutrons in Hiroshima was approximately three times greater than in Nagasaki. Our calculations based on Preeg's source-term data predicted about equal sulfur activation in the two cities

  8. Influence of Anchoring on Burial Depth of Submarine Pipelines.

    Science.gov (United States)

    Zhuang, Yuan; Li, Yang; Su, Wei

    2016-01-01

    Since the beginning of the twenty-first century, there has been widespread construction of submarine oil-gas transmission pipelines due to an increase in offshore oil exploration. Vessel anchoring operations are causing more damage to submarine pipelines due to shipping transportation also increasing. Therefore, it is essential that the influence of anchoring on the required burial depth of submarine pipelines is determined. In this paper, mathematical models for ordinary anchoring and emergency anchoring have been established to derive an anchor impact energy equation for each condition. The required effective burial depth for submarine pipelines has then been calculated via an energy absorption equation for the protection layer covering the submarine pipelines. Finally, the results of the model calculation have been verified by accident case analysis, and the impact of the anchoring height, anchoring water depth and the anchor weight on the required burial depth of submarine pipelines has been further analyzed.

  9. Universal elements of fragmentation

    International Nuclear Information System (INIS)

    Yanovsky, V. V.; Tur, A. V.; Kuklina, O. V.

    2010-01-01

    A fragmentation theory is proposed that explains the universal asymptotic behavior of the fragment-size distribution in the large-size range, based on simple physical principles. The basic principles of the theory are the total mass conservation in a fragmentation process and a balance condition for the energy expended in increasing the surface of fragments during their breakup. A flux-based approach is used that makes it possible to supplement the basic principles and develop a minimal theory of fragmentation. Such a supplementary principle is that of decreasing fragment-volume flux with increasing energy expended in fragmentation. It is shown that the behavior of the decreasing flux is directly related to the form of a power-law fragment-size distribution. The minimal theory is used to find universal asymptotic fragment-size distributions and to develop a natural physical classification of fragmentation models. A more general, nonlinear theory of strong fragmentation is also developed. It is demonstrated that solutions to a nonlinear kinetic equation consistent with both basic principles approach a universal asymptotic size distribution. Agreement between the predicted asymptotic fragment-size distributions and experimental observations is discussed.

  10. Experimental Research on Destruction Mode and Anchoring Performance of Carbon Fiber Phyllostachys pubescens Anchor Rod with Different Forms

    Directory of Open Access Journals (Sweden)

    Wang Yulan

    2018-01-01

    Full Text Available The anchoring technology is extensively applied in reinforcing protection of the earth relics. Now that no specification is available for different new anchor rods in earth relics protection due to diversified destruction modes of earth relics and complexity of engineering technology conditions, it is urgent to guide reinforcing design and construction with a complete detailed anchor rod research document. With the new carbon fiber Phyllostachys pubescens anchor rod as the research object, six lots of in situ tests are designed to, respectively, study the destruction mode and anchoring performance of the carbon fiber Phyllostachys pubescens anchor rod under different anchor length L, anchor rod diameter D, bore diameter H, grouting material S, rib spacing R, and inclination angle A in this paper. By studying load shift curve experiment in drawing of the anchor rod, the destruction mode and ultimate bearing capacity of the carbon fiber Phyllostachys pubescens anchor rod in different experiment lots are obtained, and the concept of permitted application value N in anchor rod design is proposed. By studying strain distribution characteristics of anchor rods in experimental lots along the length direction under action of the permitted application value N and combining the existing destruction mode and ultimate bearing capacity, this paper analyzes influences of L, D, H, S, R, and A on anchoring effect of the carbon fiber Phyllostachys pubescens anchor rod; gives the reasonable value range of L, D, H, and R when the carbon fiber Phyllostachys pubescens anchor rod is used for reinforcing design of the earth relics; and provides favorable experiment basis for reinforcing design of the earth relics based on the carbon fiber Phyllostachys pubescens anchor rod.

  11. Decay accelerating factor (DAF) is anchored to membranes by a C-terminal glycolipid

    International Nuclear Information System (INIS)

    Medof, M.E.; Haas, R.; Walter, E.I.; Rosenberry, T.L.

    1986-01-01

    Purified 70 kDa membrane (m) DAF incorporates into cells when added in vitro. A 2 kDa smaller DAF form which functions extrinsically like C4bp but is unable to incorporate can be isolated from urine (u). Because of common deficits of mDAF and acetylcholinesterase (AChE) in erythrocytes (E) of patients with paroxysmal nocturnal hemoglobinuria (PNH), mDAF was analyzed for a O-terminal glycolipid membrane anchor similar to that in E AChE. Incubation of E with phosphatidylinositol-specific phospholipase C, an enzyme which cleaves a similar glycolipid anchor in trypanosome variant surface glycoproteins (mfVSGs), released 20% of the DAF antigen. The released DAF species resembled uDAF in size, extrinsic model of C4b2a decay, and lack of hydrophobicity. Reductive radiomethylation of mDAF with [ 14 C]HCHO and NaCNBH 3 revealed ethanolamine and glucosamine in proportions similar to those in the E AChE glycolipid anchor. Papain cleavage of radiomethylated mDAF released the labeled ethanolamine and glucosamine in small O-terminal fragments from the residual DAF that retained N-terminal Asp. Following labeling of the anchors of mDAF and E AChE with the lipophilic photoreagent 3-trifluoromethyl-3-(m-[ 125 I]iodophenyl)diazirine, cleavage at the glucosamine residue by deamination quantitatively released the label from both proteins. Biosynthetic labeling of Hela cells with [ 3 H]ethanolamine resulted in rapid 3 H incorporation into both 48 kDa proDAF and 70 kDa mDAF. These data indicate that mDAF is anchored by a glycolipid similar to that in E AChE, mfVSGs and Thy-1 antigen and raise the possibility that a defect in the assembly or attachment of this structure could account for the deficits of mDAF and E AChE in PNH

  12. Process for forming sulfuric acid

    Science.gov (United States)

    Lu, Wen-Tong P.

    1981-01-01

    An improved electrode is disclosed for the anode in a sulfur cycle hydrogen generation process where sulfur dioxie is oxidized to form sulfuric acid at the anode. The active compound in the electrode is palladium, palladium oxide, an alloy of palladium, or a mixture thereof. The active compound may be deposited on a porous, stable, conductive substrate.

  13. Accidents with sulfuric acid

    Directory of Open Access Journals (Sweden)

    Rajković Miloš B.

    2006-01-01

    Full Text Available Sulfuric acid is an important industrial and strategic raw material, the production of which is developing on all continents, in many factories in the world and with an annual production of over 160 million tons. On the other hand, the production, transport and usage are very dangerous and demand measures of precaution because the consequences could be catastrophic, and not only at the local level where the accident would happen. Accidents that have been publicly recorded during the last eighteen years (from 1988 till the beginning of 2006 are analyzed in this paper. It is very alarming data that, according to all the recorded accidents, over 1.6 million tons of sulfuric acid were exuded. Although water transport is the safest (only 16.38% of the total amount of accidents in that way 98.88% of the total amount of sulfuric acid was exuded into the environment. Human factor was the common factor in all the accidents, whether there was enough control of the production process, of reservoirs or transportation tanks or the transport was done by inadequate (old tanks, or the accidents arose from human factor (inadequate speed, lock of caution etc. The fact is that huge energy, sacrifice and courage were involved in the recovery from accidents where rescue teams and fire brigades showed great courage to prevent real environmental catastrophes and very often they lost their lives during the events. So, the phrase that sulfuric acid is a real "environmental bomb" has become clearer.

  14. SULFUR POLYMER ENCAPSULATION.

    Energy Technology Data Exchange (ETDEWEB)

    KALB, P.

    2001-08-22

    Sulfur polymer cement (SPC) is a thermoplastic polymer consisting of 95 wt% elemental sulfur and 5 wt% organic modifiers to enhance long-term durability. SPC was originally developed by the U.S. Bureau of Mines as an alternative to hydraulic cement for construction applications. Previous attempts to use elemental sulfur as a construction material in the chemical industry failed due to premature degradation. These failures were caused by the internal stresses that result from changes in crystalline structure upon cooling of the material. By reacting elemental sulfur with organic polymers, the Bureau of Mines developed a product that successfully suppresses the solid phase transition and significantly improves the stability of the product. SPC, originally named modified sulfur cement, is produced from readily available, inexpensive waste sulfur derived from desulfurization of both flue gases and petroleum. The commercial production of SPC is licensed in the United States by Martin Resources (Odessa, Texas) and is marketed under the trade name Chement 2000. It is sold in granular form and is relatively inexpensive ({approx}$0.10 to 0.12/lb). Application of SPC for the treatment of radioactive, hazardous, and mixed wastes was initially developed and patented by Brookhaven National Laboratory (BNL) in the mid-1980s (Kalb and Colombo, 1985; Colombo et al., 1997). The process was subsequently investigated by the Commission of the European Communities (Van Dalen and Rijpkema, 1989), Idaho National Engineering Laboratory (Darnell, 1991), and Oak Ridge National Laboratory (Mattus and Mattus, 1994). SPC has been used primarily in microencapsulation applications but can also be used for macroencapsulation of waste. SPC microencapsulation has been demonstrated to be an effective treatment for a wide variety of wastes, including incinerator hearth and fly ash; aqueous concentrates such as sulfates, borates, and chlorides; blowdown solutions; soils; and sludges. It is not

  15. Mass-dependent sulfur isotope fractionation during reoxidative sulfur cycling

    DEFF Research Database (Denmark)

    Pellerin, André; Bui, Thi Hao; Rough, Mikaella

    2015-01-01

    The multiple sulfur isotope composition of porewater sulfate from the anoxic marine sapropel of Mangrove Lake, Bermuda was measured in order to establish how multiple sulfur isotopes are fractionated during reoxidative sulfur cycling. The porewater-sulfate d34S and D33S dataset exhibits the disti......The multiple sulfur isotope composition of porewater sulfate from the anoxic marine sapropel of Mangrove Lake, Bermuda was measured in order to establish how multiple sulfur isotopes are fractionated during reoxidative sulfur cycling. The porewater-sulfate d34S and D33S dataset exhibits......, informed by the chemistry of sulfur intermediate compounds in Mangrove Lake, reveals that sulfate reduction produces a relatively small intrinsic fractionation and that an active reoxidative sulfur cycle increases the fractionation of the measured values. Based on the model results, the reoxidative cycle...... of Mangrove Lake appears to include sulfide oxidation to elemental sulfur followed by the disproportionation of the elemental sulfur to sulfate and sulfide. This model also indicates that the reoxidative sulfur cycle of Mangrove Lake turns over from 50 to 80% of the sulfide produced by microbial sulfate...

  16. Measures for the Safe Operation of Anchoring in a Storm

    Science.gov (United States)

    Han, Tianding; Ai, Wanzheng

    2018-01-01

    The collision and stranding of ship other shipwreck accidents are mainly caused by the ship dragging. As the water is less in coastal areas, anchoring has less influence on cementing ship, so strong wind is the most important factor for ship anchoring. Therefore, it is very important to study the safety evaluation of mooring in strong wind. In this paper, the measures taken after the ship anchoring is come up with from the analysis on the typical accidents and causes of anchoring security. The safety measures at the time of anchoring are also studied.

  17. Comparative Study on Different Slot Forms of Prestressed Anchor Blocks

    Science.gov (United States)

    Fan, Rong; Si, Jianhui; Jian, Zheng

    2018-03-01

    In this paper, two models of prestressed pier, rectangular cavity anchor block and arch hollow anchor block are established. The ABAQUS software was used to calculate the stress of the surface of the neck of the pier and the cavity of the anchor block, through comparative analysis. The results show that compared with the rectangular cavity anchor block, the stress of the pier and the cavity can be effectively reduced when the arch hole is used, and the amount of prestressed anchor can be reduced, so as to obtain obvious economic benefits.

  18. Composite materials formed with anchored nanostructures

    Science.gov (United States)

    Seals, Roland D; Menchhofer, Paul A; Howe, Jane Y; Wang, Wei

    2015-03-10

    A method of forming nano-structure composite materials that have a binder material and a nanostructure fiber material is described. A precursor material may be formed using a mixture of at least one metal powder and anchored nanostructure materials. The metal powder mixture may be (a) Ni powder and (b) NiAl powder. The anchored nanostructure materials may comprise (i) NiAl powder as a support material and (ii) carbon nanotubes attached to nanoparticles adjacent to a surface of the support material. The process of forming nano-structure composite materials typically involves sintering the mixture under vacuum in a die. When Ni and NiAl are used in the metal powder mixture Ni.sub.3Al may form as the binder material after sintering. The mixture is sintered until it consolidates to form the nano-structure composite material.

  19. Chemical biology of Glycosylphosphatidylinositol (GPI) anchors

    Indian Academy of Sciences (India)

    Admin

    CSIR-IIIM. Chemical biology of GPI anchors. • Organic synthesis, biosynthesis and cell biology of PI/GPI molecules. • Design and synthesis of structural and functional mimics of. PI/GPI t b bi l i l ti. PI/GPIs to probe biological questions. • Targeting PI3K/AKT/mTOR pathway for anticancer drug discovery. • Role of PI3K isoforms ...

  20. Reduced sulfur in euxinic sediments of the Cariaco Basin : Sulfur isotope contraints on organic sulfur formation

    NARCIS (Netherlands)

    Sinninghe Damsté, J.S.; Werne, J.; Lyons, T.W.; Hollander, D.J.; Formolo, M.

    2003-01-01

    Reduced sulfur accumulation in Holocene and latest Pleistocene euxinic marine sediments from the Cariaco Basin, Venezuela, was investigated to constrain the timing and possible pathways of organic matter (OM) sulfurization. Data were collected for a diverse suite of sulfur species, including

  1. Electropermanent magnetic anchoring for surgery and endoscopy.

    Science.gov (United States)

    Tugwell, Josef; Brennan, Philip; O'Shea, Conor; O'Donoghue, Kilian; Power, Timothy; O'Shea, Michael; Griffiths, James; Cahill, Ronan; Cantillon-Murphy, Padraig

    2015-03-01

    The use of magnets for anchoring of instrumentation in minimally invasive surgery and endoscopy has become of increased interest in recent years. Permanent magnets have significant advantages over electromagnets for these applications; larger anchoring and retraction force for comparable size and volume without the need for any external power supply. However, permanent magnets represent a potential hazard in the operating field where inadvertent attraction to surgical instrumentation is often undesirable. The current work proposes an interesting hybrid approach which marries the high forces of permanent magnets with the control of electromagnetic technology including the ability to turn the magnet OFF when necessary. This is achieved through the use of an electropermanent magnet, which is designed for surgical retraction across the abdominal and gastric walls. Our electropermanent magnet, which is hand-held and does not require continuous power, is designed with a center lumen which may be used for trocar or needle insertion. The device in this application has been demonstrated successfully in the porcine model where coupling between an intraluminal ring magnet and our electropermanent magnet facilitated guided insertion of an 18 Fr Tuohy needle for guidewire placement. Subsequent investigations have demonstrated the ability to control the coupling distance of the system alleviating shortcomings with current methods of magnetic coupling due to variation in transabdominal wall thicknesses. With further refinement, the magnet may find application in the anchoring of endoscopic and surgical instrumentation for minimally invasive interventions in the gastrointestinal tract.

  2. Anchored design of protein-protein interfaces.

    Directory of Open Access Journals (Sweden)

    Steven M Lewis

    Full Text Available Few existing protein-protein interface design methods allow for extensive backbone rearrangements during the design process. There is also a dichotomy between redesign methods, which take advantage of the native interface, and de novo methods, which produce novel binders.Here, we propose a new method for designing novel protein reagents that combines advantages of redesign and de novo methods and allows for extensive backbone motion. This method requires a bound structure of a target and one of its natural binding partners. A key interaction in this interface, the anchor, is computationally grafted out of the partner and into a surface loop on the design scaffold. The design scaffold's surface is then redesigned with backbone flexibility to create a new binding partner for the target. Careful choice of a scaffold will bring experimentally desirable characteristics into the new complex. The use of an anchor both expedites the design process and ensures that binding proceeds against a known location on the target. The use of surface loops on the scaffold allows for flexible-backbone redesign to properly search conformational space.This protocol was implemented within the Rosetta3 software suite. To demonstrate and evaluate this protocol, we have developed a benchmarking set of structures from the PDB with loop-mediated interfaces. This protocol can recover the correct loop-mediated interface in 15 out of 16 tested structures, using only a single residue as an anchor.

  3. Resisting anchoring effects: The roles of metric and mapping knowledge.

    Science.gov (United States)

    Smith, Andrew R; Windschitl, Paul D

    2015-10-01

    The biasing influence of anchors on numerical estimates is well established, but the relationship between knowledge level and the susceptibility to anchoring effects is less clear. In two studies, we addressed the potential mitigating effects of having knowledge in a domain on vulnerability to anchoring effects in that domain. Of critical interest was a distinction between two forms of knowledge-metric and mapping knowledge. In Study 1, participants who had studied question-relevant information-that is, high-knowledge participants-were less influenced by anchors than were participants who had studied irrelevant information. The results from knowledge measures suggested that the reduction in anchoring was tied to increases in metric rather than mapping knowledge. In Study 2, participants studied information specifically designed to influence different types of knowledge. As we predicted, increases in metric knowledge-and not mapping knowledge-led to reduced anchoring effects. Implications for debiasing anchoring effects are discussed.

  4. Robotic Ankle for Omnidirectional Rock Anchors

    Science.gov (United States)

    Parness, Aaron; Frost, Matthew; Thatte, Nitish

    2013-01-01

    Future robotic exploration of near-Earth asteroids and the vertical and inverted rock walls of lava caves and cliff faces on Mars and other planetary bodies would require a method of gripping their rocky surfaces to allow mobility without gravitational assistance. In order to successfully navigate this terrain and drill for samples, the grippers must be able to produce anchoring forces in excess of 100 N. Additionally, the grippers must be able to support the inertial forces of a moving robot, as well gravitational forces for demonstrations on Earth. One possible solution would be to use microspine arrays to anchor to rock surfaces and provide the necessary load-bearing abilities for robotic exploration of asteroids. Microspine arrays comprise dozens of small steel hooks supported on individual suspensions. When these arrays are dragged along a rock surface, the steel hooks engage with asperities and holes on the surface. The suspensions allow for individual hooks to engage with asperities while the remaining hooks continue to drag along the surface. This ensures that the maximum possible number of hooks engage with the surface, thereby increasing the load-bearing abilities of the gripper. Using the microspine array grippers described above as the end-effectors of a robot would allow it to traverse terrain previously unreachable by traditional wheeled robots. Furthermore, microspine-gripping robots that can perch on cliffs or rocky walls could enable a new class of persistent surveillance devices for military applications. In order to interface these microspine grippers with a legged robot, an ankle is needed that can robotically actuate the gripper, as well as allow it to conform to the large-scale irregularities in the rock. The anchor serves three main purposes: deploy and release the anchor, conform to roughness or misalignment with the surface, and cancel out any moments about the anchor that could cause unintentional detachment. The ankle design contains a

  5. Acidophilic sulfur disproportionation

    Science.gov (United States)

    Hardisty, Dalton S.; Olyphant, Greg A.; Bell, Jonathan B.; Johnson, Adam P.; Pratt, Lisa M.

    2013-07-01

    Bacterial disproportionation of elemental sulfur (S0) is a well-studied metabolism and is not previously reported to occur at pH values less than 4.5. In this study, a sediment core from an abandoned-coal-mine-waste deposit in Southwest Indiana revealed sulfur isotope fractionations between S0 and pyrite (Δ34Ses-py) of up to -35‰, inferred to indicate intense recycling of S0 via bacterial disproportionation and sulfide oxidation. Additionally, the chemistry of seasonally collected pore-water profiles were found to vary, with pore-water pH ranging from 2.2 to 3.8 and observed seasonal redox shifts expressed as abrupt transitions from Fe(III) to Fe(II) dominated conditions, often controlled by fluctuating water table depths. S0 is a common product during the oxidation of pyrite, a process known to generate acidic waters during weathering and production of acid mine drainage. The H2S product of S0 disproportionation, fractionated by up to -8.6‰, is rapidly oxidized to S0 near redox gradients via reaction with Fe(III) allowing for the accumulation of isotopically light S0 that can then become subject to further sulfur disproportionation. A mass-balance model for S0 incorporating pyrite oxidation, S0 disproportionation, and S0 oxidation readily explains the range of observed Δ34Ses-py and emphasizes the necessity of seasonally varying pyrite weathering and metabolic rates, as indicated by the pore water chemistry. The findings of this research suggest that S0 disproportionation is potentially a common microbial process at a pH < 4.5 and can create large sulfur isotope fractionations, even in the absence of sulfate reduction.

  6. Fission fragment angular momentum

    International Nuclear Information System (INIS)

    Frenne, D. De

    1991-01-01

    Most of the energy released in fission is converted into translational kinetic energy of the fragments. The remaining excitation energy will be distributed among neutrons and gammas. An important parameter characterizing the scission configuration is the primary angular momentum of the nascent fragments. Neutron emission is not expected to decrease the spin of the fragments by more than one unit of angular momentum and is as such of less importance in the determination of the initial fragment spins. Gamma emission is a suitable tool in studying initial fragment spins because the emission time, number, energy, and multipolarity of the gammas strongly depend on the value of the primary angular momentum. The main conclusions of experiments on gamma emission were that the initial angular momentum of the fragments is large compared to the ground state spin and oriented perpendicular to the fission axis. Most of the recent information concerning initial fragment spin distributions comes from the measurement of isomeric ratios for isomeric pairs produced in fission. Although in nearly every mass chain isomers are known, only a small number are suitable for initial fission fragment spin studies. Yield and half-life considerations strongly limit the number of candidates. This has the advantage that the behavior of a specific isomeric pair can be investigated for a number of fissioning systems at different excitation energies of the fragments and fissioning nuclei. Because most of the recent information on primary angular momenta comes from measurements of isomeric ratios, the global deexcitation process of the fragments and the calculation of the initial fragment spin distribution from measured isomeric ratios are discussed here. The most important results on primary angular momentum determinations are reviewed and some theoretical approaches are given. 45 refs., 7 figs., 2 tabs

  7. ANCHORING IN THE POLITICAL AND ECONOMIC MARKETING

    Directory of Open Access Journals (Sweden)

    Tatyana L. Shklyar

    2015-01-01

    Full Text Available The main purpose of marketing, both ineconomy and in politics is to attract themaximum number of customers or voters, maximizing customer satisfaction and ,ideally, improve the quality of life.The author, in various aspects, thetechnology of anchoring used in NLP, to attract customers and voters, both in the economy and in politics.In different examples demonstrate theoverall impact on the psychology of the consumer. Separating policy and the economy, marketers are missing something. The author proposes to look at how psychologicalanchors affect these two, at fi rst glance, different vector.

  8. Stone anchors from Minicoy Island, Lakshadweep, India

    Digital Repository Service at National Institute of Oceanography (India)

    Tripati, S.

    and Ali Rajas of Kerala. It appears that the mainland had contact with these islands during the early centuries of the Christian era, if not earlier (Sila Tripati, 1999). Though Islam came to Lakshadweep after the 11th and 12th centuries AD... by fishermen. In Divehi, the local language, ring-stone anchors are known as fanaa. Of 40–50 cm diameter, they are made of coral fashioned in the form of a slightly concave disc. The width of the hole in which the wooden stock is inserted is 6–10 cm...

  9. BAHA: Bone-Anchored Hearing Aid

    Science.gov (United States)

    Hagr, Abdulrahman

    2007-01-01

    Bone-Anchored Hearing Aid (BAHA) has proven performance and advantages for patients with aural atresia or chronic ear drainage who cannot wear air-conduction hearing aids. The BAHA has both cosmetic and acoustic advantages over most conventional hearing aids and hence is becoming increasingly popular. Moreover, BAHA improves the quality of life and has also significantly reduces ear discharge. This extensive review of the literature pertaining to BAHA discus the history, the indications, the advantages, the prediction of the outcome and the complications of this device as well as comparing it to the conventional hearing aids. PMID:21475438

  10. [The bone-anchored hearing aid].

    Science.gov (United States)

    Foghsgaard, Søren

    2014-08-11

    The bone-anchored hearing aid (Baha) was introduced in 1977 by Tjellström and colleagues and has now been used clinically for over 30 years. Generally, the outcomes are good, and several studies have shown improved audiological- and quality of life outcomes. The principle of the Baha is, that sound vibrations are led directly to the inner ear via the mastoid bone, bypassing the middle ear. This is achieved via an osseointegrated implant and a skin-penetrating abutment. Studies report high success rates and a majority of complications as typically minor in nature.

  11. Adsorption phenomena and anchoring energy in nematic liquid crystals

    CERN Document Server

    Barbero, Giovanni

    2005-01-01

    Despite the large quantity of phenomenological information concerning the bulk properties of nematic phase liquid crystals, little is understood about the origin of the surface energy, particularly the surface, interfacial, and anchoring properties of liquid crystals that affect the performance of liquid crystal devices. Self-contained and unique, Adsorption Phenomena and Anchoring Energy in Nematic Liquid Crystals provides an account of new and established results spanning three decades of research into the problems of anchoring energy and adsorption phenomena in liquid crystals.The book contains a detailed discussion of the origin and possible sources of anchoring energy in nematic liquid crystals, emphasizing the dielectric contribution to the anchoring energy in particular. Beginning with fundamental surface and anchoring properties of liquid crystals and the definition of the nematic phase, the authors explain how selective ion adsorption, dielectric energy density, thickness dependence, and bias voltage...

  12. 24 CFR 3285.402 - Ground anchor installations.

    Science.gov (United States)

    2010-04-01

    ... anchor head from edge of floor or wall. 3. Table is based on main rail (I-beam) spacing per given column... ground anchor head from edge of floor or wall. 3. Tables are based on main rail (I-beam) spacing per... anchor head from edge of floor or wall. 3. Table is based on main rail (I-beam) spacing per given column...

  13. Investigation of suction anchor pullout capacity under undrained conditions

    OpenAIRE

    Jarand, Pollestad

    2015-01-01

    Master's thesis in Offshore technology Floating units are dependent on reliable mooring systems to ensure safety during marine operations. Suction anchors have proved to be a technologically viable and cost-effective concept. They are capable of precision installation, re-use, and provide large resistive capacity. This thesis investigates load capacity and failure modes of suction anchors subjected to vertical, horizontal (lateral), and incline loading. Suction anchor design co...

  14. Activity and sulfur resistance of Rh(I and Pd(II complexes

    Directory of Open Access Journals (Sweden)

    Ivana Rivas

    2011-01-01

    Full Text Available Two complexes of Rh(I and Pd(II with chloride and tridecylamine ligands were obtained and characterized by Elementary Analysis and by XPS and FTIR spectroscopies. Complexes anchored on γ-Al2O3 were tested in the styrene semi-hydrogenation reaction carried out in the absence or presence of a sulfur poison. Although both low loaded catalysts were highly selective, the Pd(II complex was three times more active than the Rh(I complex. The rhodium complex was more sulfur resistant but less active than the palladium complex. Differences in conversion and sulfur resistance between both complexes could be related to electronic and/or geometric effects.

  15. Moody experts --- How mood and expertise influence judgmental anchoring

    Directory of Open Access Journals (Sweden)

    Birte Englich

    2009-02-01

    Full Text Available Anchoring effects, the assimilation of numerical estimates to previously considered standards, are highly robust. Two studies examined whether mood and expertise jointly moderate the magnitude of anchoring. Previous research has demonstrated that happy mood induces judges to process information in a less thorough manner than sad mood, which means that happy judges tend to be more susceptible to unwanted influences. However, this may not be true for anchoring effects. Because anchoring results from an elaborate process of selective knowledge activation, more thorough processing should lead to more anchoring; as a result, sad judges should show stronger anchoring effects than happy judges and happy judges may even remain uninfluenced by the given anchors. Because information processing of experts may be relatively independent of their mood, however, mood may influence anchoring only in non-experts. Results of two studies on legal decision-making (Study 1 and numeric estimates (Study 2 are consistent with these expectations. These findings suggest that, at least for non-experts, positive mood may eliminate the otherwise robust anchoring effect.

  16. Testing methods of steel wi re ropes at the anchor

    Directory of Open Access Journals (Sweden)

    Stanislav Kropuch

    2012-12-01

    Full Text Available The present paper introduces an application of the acoustic andthermographic method in the defectoscopic testing of immobilesteel wire ropes at the most critical point, the anchor. Firstmeasurements and their results by these new defectoscopic methodsare shown. In defectoscopic tests at the anchor, the widelyused magnetic method gives unreliable results, and therefore presentsa problem for steel wire defectoscopy. Application of the two new methods in the steel wire defectoscopy at the anchor point will enableincreased safety measures at the anchor of steel wire ropes in bridge, roof, tower and aerial cable lift constructions.

  17. Coupled thermo-fluid stress analysis of Kambara Reactor with various anchors in the stirring of molten iron at extremely high temperatures

    International Nuclear Information System (INIS)

    Huang, De-Shau; Huang, Feng-Chi

    2014-01-01

    Kambara Reactors (KR) are commonly used to reduce sulfur content in steel making, achieving efficiency levels exceeding 85% at 1300 °C. Unfortunately, the operational lifespan of the KR impeller is somewhat limited due to fracturing of the refractory material via thermal shock, resulting in the penetration of molten iron into the inner core. Few studies have investigated the coupled thermo-fluid stress of KR impellers at extremely high temperatures. This study employed CFX and FEM to simulate and analyze the molten iron and the resulting thermal stress imposed on the KR impeller. Simulation results including flow field, temperature, and thermal stress under extremely high temperatures are in strong agreement with empirical data. V-type anchors for the KR impeller outperformed Y-type anchors. - Highlights: • A thermo-fluid coupling approach is proposed to analyze the thermal stress. • The temperature and stress of the impeller are 790 °C and 744 MPa at the final stage. • The highest temperatures occur at the tip of anchors, which causes material crack. • The thermal stress in impellers with Y-type anchors is greater than V-type anchors

  18. Lithium sulfur batteries and electrolytes and sulfur cathodes thereof

    Science.gov (United States)

    Visco, Steven J.; Goncharenko, Nikolay; Nimon, Vitaliy; Petrov, Alexei; Nimon, Yevgeniy S.; De Jonghe, Lutgard C.; Katz, Bruce D.; Loginova, Valentina

    2017-05-23

    Lithium sulfur battery cells that use water as an electrolyte solvent provide significant cost reductions. Electrolytes for the battery cells may include water solvent for maintaining electroactive sulfur species in solution during cell discharge and a sufficient amount of a cycle life-enhancing compound that facilitates charging at the cathode. The combination of these two components enhances one or more of the following cell attributes: energy density, power density and cycle life. For instance, in applications where cost per Watt-Hour (Wh) is paramount, such as grid storage and traction applications, the use of an aqueous electrolyte in combination with inexpensive sulfur as the cathode active material can be a key enabler for the utility and automotive industries, for example, providing a cost effective and compact solution for load leveling, electric vehicles and renewable energy storage. Sulfur cathodes, and methods of fabricating lithium sulfur cells, in particular for loading lithium sulfide into the cathode structures, provide further advantages.

  19. Embedded Fragments Registry (EFR)

    Data.gov (United States)

    Department of Veterans Affairs — In 2009, the Department of Defense estimated that approximately 40,000 service members who served in OEF/OIF may have embedded fragment wounds as the result of small...

  20. DNA fragmentation in spermatozoa

    DEFF Research Database (Denmark)

    Rex, A S; Aagaard, J.; Fedder, J

    2017-01-01

    Sperm DNA Fragmentation has been extensively studied for more than a decade. In the 1940s the uniqueness of the spermatozoa protein complex which stabilizes the DNA was discovered. In the fifties and sixties, the association between unstable chromatin structure and subfertility was investigated....... In the seventies, the impact of induced DNA damage was investigated. In the 1980s the concept of sperm DNA fragmentation as related to infertility was introduced as well as the first DNA fragmentation test: the Sperm Chromatin Structure Assay (SCSA). The terminal deoxynucleotidyl transferase nick end labelling...... (TUNEL) test followed by others was introduced in the nineties. The association between DNA fragmentation in spermatozoa and pregnancy loss has been extensively investigated spurring the need for a therapeutic tool for these patients. This gave rise to an increased interest in the aetiology of DNA damage...

  1. Fragmented Work Stories

    DEFF Research Database (Denmark)

    Humle, Didde Maria; Reff Pedersen, Anne

    2015-01-01

    , edited and performed by the storyteller in an ongoing process allowing tensions, discontinuities and editing between failures and achievements, between dreams and work realities and between home and work life. We argue that by including different types of fragmentation, we offer a new type......Following a strand of narrative studies pointing to the living conditions of storytelling and the micro-level implications of working within fragmented narrative perspectives, this article contributes to narrative research on work stories by focusing on how meaning is created from fragmented...... stories. We argue that meaning by story making is not always created by coherence and causality; meaning is created by different types of fragmentation: discontinuities, tensions and editing. The objective of this article is to develop and advance antenarrative practice analysis of work stories...

  2. Fragmentation Main Model

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The fragmentation model combines patch size and patch continuity with diversity of vegetation types per patch and rarity of vegetation types per patch. A patch was...

  3. Physics of projectile fragments

    International Nuclear Information System (INIS)

    Minamisono, Tadanori

    1982-01-01

    This is a study report on the polarization phenomena of the projectile fragments produced by heavy ion reactions, and the beta decay of fragments. The experimental project by using heavy ions with the energy from 50 MeV/amu to 250 MeV/amu was designed. Construction of an angle-dispersion spectrograph for projectile fragments was proposed. This is a two-stage spectrograph. The first stage is a QQDQQ type separator, and the second stage is QDQD type. Estimation shows that Co-66 may be separated from the nuclei with mass of 65 and 67. The orientation of fragments can be measured by detecting beta-ray. The apparatus consists of a uniform field magnet, an energy absorber, a stopper, a RF coil and a beta-ray hodoscope. This system can be used for not only this purpose but also for the measurement of hyperfine structure. (Kato, T.)

  4. Lithium-Sulfur Capacitors.

    Science.gov (United States)

    Kim, Mok-Hwa; Kim, Hyun-Kyung; Xi, Kai; Kumar, R Vasant; Jung, Dae Soo; Kim, Kwang-Bum; Roh, Kwang Chul

    2018-02-21

    Although many existing hybrid energy storage systems demonstrate promising electrochemical performances, imbalances between the energies and kinetics of the two electrodes must be resolved to allow their widespread commercialization. As such, the development of a new class of energy storage systems is a particular challenge, since future systems will require a single device to provide both a high gravimetric energy and a high power density. In this context, we herein report the design of novel lithium-sulfur capacitors. The resulting asymmetric systems exhibited energy densities of 23.9-236.4 Wh kg -1 and power densities of 72.2-4097.3 W kg -1 , which are the highest reported values for an asymmetric system to date. This approach involved the use of a prelithiated anode and a hybrid cathode material exhibiting anion adsorption-desorption in addition to the electrochemical reduction and oxidation of sulfur at almost identical rates. This novel strategy yielded both high energy and power densities, and therefore establishes a new benchmark for hybrid systems.

  5. Fragment Impact Toolkit (FIT)

    Energy Technology Data Exchange (ETDEWEB)

    Shevitz, Daniel Wolf [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Key, Brian P. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Garcia, Daniel B. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-09-05

    The Fragment Impact Toolkit (FIT) is a software package used for probabilistic consequence evaluation of fragmenting sources. The typical use case for FIT is to simulate an exploding shell and evaluate the consequence on nearby objects. FIT is written in the programming language Python and is designed as a collection of interacting software modules. Each module has a function that interacts with the other modules to produce desired results.

  6. Testing and modeling of cyclically loaded rock anchors

    Directory of Open Access Journals (Sweden)

    Joar Tistel

    2017-12-01

    Full Text Available The Norwegian Public Roads Administration (NPRA is planning for an upgrade of the E39 highway route at the westcoast of Norway. Fixed links shall replace ferries at seven fjord crossings. Wide spans and large depths at the crossings combined with challenging subsea topography and environmental loads call for an extension of existing practice. A variety of bridge concepts are evaluated in the feasibility study. The structures will experience significant loads from deadweight, traffic and environment. Anchoring of these forces is thus one of the challenges met in the project. Large-size subsea rock anchors are considered a viable alternative. These can be used for anchoring of floating structures but also with the purpose of increasing capacity of fixed structures. This paper presents first a thorough study of factors affecting rock anchor bond capacity. Laboratory testing of rock anchors subjected to cyclic loading is thereafter presented. Finally, the paper presents a model predicting the capacity of a rock anchor segment, in terms of a ribbed bar, subjected to a cyclic load history. The research assumes a failure mode occurring in the interface between the rock anchor and the surrounding grout. The constitutive behavior of the bonding interface is investigated for anchors subjected to cyclic one-way tensile loads. The model utilizes the static bond capacity curve as a basis, defining the ultimate bond τbu and the slip s1 at τbu. A limited number of input parameters are required to apply the model. The model defines the bond-slip behavior with the belonging rock anchor capacity depending on the cyclic load level (τmax cy/τbu, the cyclic load ratio (R = τmin cy/τmax cy, and the number of load cycles (N. The constitutive model is intended to model short anchor lengths representing an incremental length of a complete rock anchor.

  7. Equating Subscores under the Nonequivalent Anchor Test (NEAT) Design

    Science.gov (United States)

    Puhan, Gautam; Liang, Longjuan

    2011-01-01

    The study examined two approaches for equating subscores. They are (1) equating subscores using internal common items as the anchor to conduct the equating, and (2) equating subscores using equated and scaled total scores as the anchor to conduct the equating. Since equated total scores are comparable across the new and old forms, they can be used…

  8. Career anchors and values from different career management perspectives

    Directory of Open Access Journals (Sweden)

    Rodrigo Cunha da Silva

    2016-06-01

    Full Text Available Purpose – To analyze the relationships between career anchors and young Generation Y professionals’ values, from the career concept perspective. Design/methodology/approach – Research concerning the proposed objective was carried out through quantitative research involving 189 Business Administration majors from a Catholic university in São Paulo, Brazil. We used two instruments to identify the career anchors and values of respondents: Schein (1990 and Schwartz (1994, respectively. We used statistical techniques to explore the relationships between career anchors and values. Findings – Among the results, mention should be made to the statistical relationships found between analyzed career anchors and values. It is also important to stress that, although the Lifestyle career anchor was predominantly present in the conglomerate division, this anchor was the predominant characteristic in the differentiation of the smaller group of respondents, the new career group. The General Management Career Anchor, which presents a lower incidence, is the predominant characteristic of the larger group, referring to organizational careers. As well as the Lifestyle career anchor, the Hedonism value was predominant among respondents. Originality/value – The need to consider the following was found: Generation Y presents generational characteristics that drive people management to propose work structures that offer activities to generate learning, pleasure, self-fulfillment and conciliation between work and personal life.

  9. Software Note: Using BILOG for Fixed-Anchor Item Calibration

    Science.gov (United States)

    DeMars, Christine E.; Jurich, Daniel P.

    2012-01-01

    The nonequivalent groups anchor test (NEAT) design is often used to scale item parameters from two different test forms. A subset of items, called the anchor items or common items, are administered as part of both test forms. These items are used to adjust the item calibrations for any differences in the ability distributions of the groups taking…

  10. Robust conductance of dumbbell molecular junctions with fullerene anchoring groups

    DEFF Research Database (Denmark)

    Markussen, Troels; Settnes, Mikkel; Thygesen, Kristian Sommer

    2011-01-01

    that a dumbbell construction with C60 molecules acting as anchors yields more well-defined conductances as compared to the widely used thiol anchoring groups. Here, we use density functional theory to investigate the electronic properties of this dumbbell construction. The conductance is found to be stable...

  11. Geological significance of stone anchors from Dwarka waters, Gujarat, India

    Digital Repository Service at National Institute of Oceanography (India)

    Iyer, S.D.; Vora, K.H.; Gaur, A.S.

    of the anchors in terms of the rock type and their availability are presented. Four anchors were sampled for petrological investigations of which one is basalt, one is sandstone, and two are limestone. The latter two rock types are abundant in the vicinity...

  12. Use of Jackknifing to Evaluate Effects of Anchor Item Selection on Equating with the Nonequivalent Groups with Anchor Test (NEAT) Design. Research Report. ETS RR-15-10

    Science.gov (United States)

    Lu, Ru; Haberman, Shelby; Guo, Hongwen; Liu, Jinghua

    2015-01-01

    In this study, we apply jackknifing to anchor items to evaluate the impact of anchor selection on equating stability. In an ideal world, the choice of anchor items should have little impact on equating results. When this ideal does not correspond to reality, selection of anchor items can strongly influence equating results. This influence does not…

  13. A MnO2/Graphene Oxide/Multi-Walled Carbon Nanotubes-Sulfur Composite with Dual-Efficient Polysulfide Adsorption for Improving Lithium-Sulfur Batteries.

    Science.gov (United States)

    Li, Yong; Ye, Daixin; Liu, Wen; Shi, Bin; Guo, Rui; Zhao, Hongbin; Pei, Haijuan; Xu, Jiaqiang; Xie, Jingying

    2016-10-26

    Lithium-sulfur batteries can potentially be used as a chemical power source because of their high energy density. However, the sulfur cathode has several shortcomings, including fast capacity attenuation, poor electrochemical activity, and low Coulombic efficiency. Herein, multi-walled carbon nanotubes (CNTs), graphene oxide (GO), and manganese dioxide are introduced to the sulfur cathode. A MnO 2 /GO/CNTs-S composite with a unique three-dimensional (3D) architecture was synthesized by a one-pot chemical method and heat treatment approach. In this structure, the innermost CNTs work as a conducting additive and backbone to form a conducting network. The MnO 2 /GO nanosheets anchored on the sidewalls of CNTs have a dual-efficient absorption capability for polysulfide intermediates as well as afford adequate space for sulfur loading. The outmost nanosized sulfur particles are well-distributed on the surface of the MnO 2 /GO nanosheets and provide a short transmission path for Li + and the electrons. The sulfur content in the MnO 2 /GO/CNTs-S composite is as high as 80 wt %, and the as-designed MnO 2 /GO/CNTs-S cathode displays excellent comprehensive performance. The initial specific capacities are up to 1500, 1300, 1150, 1048, and 960 mAh g -1 at discharging rates of 0.05, 0.1, 0.2, 0.5, and 1 C, respectively. Moreover, the composite cathode shows a good cycle performance: the specific capacity remains at 963.5 mAh g -1 at 0.2 C after 100 cycles when the area density of sulfur is 2.8 mg cm -2 .

  14. Biased calculations: Numeric anchors influence answers to math equations

    Directory of Open Access Journals (Sweden)

    Andrew R. Smith

    2011-02-01

    Full Text Available People must often perform calculations in order to produce a numeric estimate (e.g., a grocery-store shopper estimating the total price of his or her shopping cart contents. The current studies were designed to test whether estimates based on calculations are influenced by comparisons with irrelevant anchors. Previous research has demonstrated that estimates across a wide range of contexts assimilate toward anchors, but none has examined estimates based on calculations. In two studies, we had participants compare the answers to math problems with anchors. In both studies, participants' estimates assimilated toward the anchor values. This effect was moderated by time limit such that the anchoring effects were larger when the participants' ability to engage in calculations was limited by a restrictive time limit.

  15. Anchoring submersible ultrasonic receivers in river channels with stable substrate

    Science.gov (United States)

    Bettoli, Phillip William; Scholten, G.D.; Hubbs, D.

    2010-01-01

    We developed an anchoring system for submersible ultrasonic receivers (SURs) that we placed on the bottom of the riverine reaches of three main-stem reservoirs in the upper Tennessee River. Each anchor consisted of a steel tube (8.9 x 35.6 cm) welded vertically to a round plate of steel (5.1 x 40.6 cm). All seven SURs and their 57-kg anchors were successfully deployed and retrieved three times over 547 d by a dive team employing surface air-breathing equipment and a davit-equipped boat. All of the anchors and their SURs remained stationary over two consecutive winters on the hard-bottom, thalweg sites where they were deployed. The SUR and its anchor at the most downriver site experienced flows that exceeded 2,100 m(3)/s and mean water column velocities of about 0.9 m/s.

  16. Grapnel stone anchors from Saurashtra: Remnants of Indo-Arab trade on the Indian coast

    Digital Repository Service at National Institute of Oceanography (India)

    Gaur, A.S.; Sundaresh; Tripati, S.

    Stone anchors have been used as a primary source of information on ancient navigation by marine archaeologists since long. These anchors used by ancient mariners are often noticed underwater at various places across the world. Stone anchors are also...

  17. The Use of Two Anchors in Nonequivalent Groups with Anchor Test (NEAT) Equating. Research Report. ETS RR-10-23

    Science.gov (United States)

    Moses, Tim; Deng, Weiling; Zhang, Yu-Li

    2010-01-01

    In the equating literature, a recurring concern is that equating functions that utilize a single anchor to account for examinee groups' nonequivalence are biased when the groups are extremely different and/or when the anchor only weakly measures what the tests measure. Several proposals have been made to address this equating bias by incorporating…

  18. Fossilization of melanosomes via sulfurization.

    Science.gov (United States)

    McNamara, Maria E; van Dongen, Bart E; Lockyer, Nick P; Bull, Ian D; Orr, Patrick J

    2016-05-01

    Fossil melanin granules (melanosomes) are an important resource for inferring the evolutionary history of colour and its functions in animals. The taphonomy of melanin and melanosomes, however, is incompletely understood. In particular, the chemical processes responsible for melanosome preservation have not been investigated. As a result, the origins of sulfur-bearing compounds in fossil melanosomes are difficult to resolve. This has implications for interpretations of original colour in fossils based on potential sulfur-rich phaeomelanosomes. Here we use pyrolysis gas chromatography mass spectrometry (Py-GCMS), fourier transform infrared spectroscopy (FTIR) and time of flight secondary ion mass spectrometry (ToF-SIMS) to assess the mode of preservation of fossil microstructures, confirmed as melanosomes based on the presence of melanin, preserved in frogs from the Late Miocene Libros biota (NE Spain). Our results reveal a high abundance of organosulfur compounds and non-sulfurized fatty acid methyl esters in both the fossil tissues and host sediment; chemical signatures in the fossil tissues are inconsistent with preservation of phaeomelanin. Our results reflect preservation via the diagenetic incorporation of sulfur, i.e. sulfurization (natural vulcanization), and other polymerization processes. Organosulfur compounds and/or elevated concentrations of sulfur have been reported from melanosomes preserved in various invertebrate and vertebrate fossils and depositional settings, suggesting that preservation through sulfurization is likely to be widespread. Future studies of sulfur-rich fossil melanosomes require that the geochemistry of the host sediment is tested for evidence of sulfurization in order to constrain interpretations of potential phaeomelanosomes and thus of original integumentary colour in fossils.

  19. Motility patterns of filamentous sulfur bacteria, Beggiatoa spp

    DEFF Research Database (Denmark)

    Dunker, Rita; Røy, Hans; Kamp, Anja

    2011-01-01

    The large sulfur bacteria, Beggiatoa spp., live on the oxidation of sulfide with oxygen or nitrate, but avoid high concentrations of both sulfide and oxygen. As gliding filaments, they rely on reversals in the gliding direction to find their preferred environment, the oxygen–sulfide interface. We...... observed the chemotactic patterns of single filaments in a transparent agar medium and scored their reversals and the glided distances between reversals. Filaments within the preferred microenvironment glided distances shorter than their own length between reversals that anchored them in their position...... as a microbial mat. Filaments in the oxic region above the mat or in the sulfidic, anoxic region below the mat glided distances longer than the filament length between reversals. This reversal behavior resulted in a diffusion-like spreading of the filaments. A numerical model of such gliding filaments...

  20. Fragmentation of kidney stones

    International Nuclear Information System (INIS)

    Kovacs, K.; Kun, F.; Vertse, T.

    2005-01-01

    Complete text of publication follows. Fragmentation, i.e. the breaking of particulate materials into smaller pieces is abundant in nature and underlies several industrial processes, which attracted a continuous interest in scientific and engineering research over the past decades. In industrial applications, fragmentation processes are mostly used for the comminution of ores in various types of mills. Kidney stone is a well known human dis- ease which embitters the life of many people (in a country like the USA about 10 6 cases are registered yearly). In order to extract large kidney stones (diameter ≥ 1 cm) from the human body without operation, one of the most efficient treatment is the fragmentation of kidney stones by the so-called extracorporal shock wave lithography method: a shock wave penetrating the human body is generated by an electric pulse. The repeated application of the shock wave gradually fragments the stones into pieces of size ≤ 2 mm which then leave the body through the urine system. Recently, a novel type of lithographic method has been suggested by using widely focused shock waves which fragment the stones by a squeezing mechanism. Laboratory experiments showed that the widely focused squeezing waves achieve a higher fragmentation efficiency than the frequently used shock waves of sharp focus. Based on this method a novel medical treatment can be introduced which is less demanding for the patients. Before the application of the method in the clinical practice a detailed understanding of the fragmentation mechanism of kidney stones due to shock waves is required. Since analytic theoretical methods have serious limitations in this field, we develop a realistic model of the mechanical behavior of kidney stones and a simulation code which makes possible to study the mechanism of breakup under various external conditions. Computer simulations in two dimensions have revealed a peculiar way of crack formation, i.e. the crack which finally breaks

  1. A magnetically actuated anchoring system for a wireless endoscopic capsule.

    Science.gov (United States)

    Zhou, Hao; Alici, Gursel; Munoz, Fredy

    2016-12-01

    In this study, we propose a new magnetically actuated anchoring system for wireless capsule endoscopes (WCE) by employing the principle of a switchable magnetic spring. A force model is derived to predict the magnetic force needed to support the interaction between the anchors and the intestinal lumen. The theoretical and experimental analysis conducted shows that the magnetic spring is capable of providing the force needed to activate the anchoring mechanism, which consists of four foldable legs. A prototype capsule with a size comparable with the size of a commercial WCE was designed, fabricated, and tested. The in-vitro tests with a real small intestine show that the proposed anchoring mechanism is able to raise the friction force between the anchoring legs and inner wall of the intestine by more than two times after its activation using an external magnetic field. Experimental results presented demonstrate that the proposed anchoring system, which has a low foot-print not taking up too much space on the capsule, can provide a reliable anchoring capability with the capsule inside the intestinal lumen.

  2. Quantifying Heuristic Bias: Anchoring, Availability, and Representativeness.

    Science.gov (United States)

    Richie, Megan; Josephson, S Andrew

    2018-01-01

    Construct: Authors examined whether a new vignette-based instrument could isolate and quantify heuristic bias. Heuristics are cognitive shortcuts that may introduce bias and contribute to error. There is no standardized instrument available to quantify heuristic bias in clinical decision making, limiting future study of educational interventions designed to improve calibration of medical decisions. This study presents validity data to support a vignette-based instrument quantifying bias due to the anchoring, availability, and representativeness heuristics. Participants completed questionnaires requiring assignment of probabilities to potential outcomes of medical and nonmedical scenarios. The instrument randomly presented scenarios in one of two versions: Version A, encouraging heuristic bias, and Version B, worded neutrally. The primary outcome was the difference in probability judgments for Version A versus Version B scenario options. Of 167 participants recruited, 139 enrolled. Participants assigned significantly higher mean probability values to Version A scenario options (M = 9.56, SD = 3.75) than Version B (M = 8.98, SD = 3.76), t(1801) = 3.27, p = .001. This result remained significant analyzing medical scenarios alone (Version A, M = 9.41, SD = 3.92; Version B, M = 8.86, SD = 4.09), t(1204) = 2.36, p = .02. Analyzing medical scenarios by heuristic revealed a significant difference between Version A and B for availability (Version A, M = 6.52, SD = 3.32; Version B, M = 5.52, SD = 3.05), t(404) = 3.04, p = .003, and representativeness (Version A, M = 11.45, SD = 3.12; Version B, M = 10.67, SD = 3.71), t(396) = 2.28, p = .02, but not anchoring. Stratifying by training level, students maintained a significant difference between Version A and B medical scenarios (Version A, M = 9.83, SD = 3.75; Version B, M = 9.00, SD = 3.98), t(465) = 2.29, p = .02, but not residents or attendings. Stratifying by heuristic and training level, availability maintained

  3. Fragments of the Past

    OpenAIRE

    Peter Szende; Annie Holcombe

    2016-01-01

    With travel being made more accessible throughout the decades, the hospitality industry constantly evolved their practices as society and technology progressed. Hotels looked for news ways up service their customers, which led to the invention of the Servidor in 1918. Once revolutionary innovations have gone extinct, merely becoming fragments of the past.

  4. Picking Up (On) Fragments

    NARCIS (Netherlands)

    Ellis, Phil

    2015-01-01

    abstractThis article discusses the implications for archival and media archaeological research and reenactment artwork relating to a recent arts practice project: reenacttv: 30 lines / 60 seconds. It proposes that archival material is unstable but has traces and fragments that are full of creative

  5. Fragments of Time

    DEFF Research Database (Denmark)

    Christiansen, Steen Ledet

    Time travel films necessarily fragment linear narratives, as scenes are revisited with differences from the first time we saw it. Popular films such as Back to the Future mine comedy from these visitations, but there are many different approaches. One extreme is Chris Marker's La Jetée - a film...

  6. Wildlife habitat fragmentation.

    Science.gov (United States)

    John. Lehmkuhl

    2005-01-01

    A primary issue in forest wildlife management is habitat fragmentation and its effects on viability, which is the "bottom line" for plant and animal species of conservation concern. Population viability is the likelihood that a population will be able to maintain itself (remain viable) over a long period of time-usually 100 years or more. Though it is true...

  7. Fragments of the Past

    Directory of Open Access Journals (Sweden)

    Peter Szende

    2016-10-01

    Full Text Available With travel being made more accessible throughout the decades, the hospitality industry constantly evolved their practices as society and technology progressed. Hotels looked for news ways up service their customers, which led to the invention of the Servidor in 1918. Once revolutionary innovations have gone extinct, merely becoming fragments of the past.

  8. Stone fragmentation by ultrasound

    Indian Academy of Sciences (India)

    Some delicate nerves and fibres in the surrounding areas of the stones present in the kidney are also damaged by high ultrasonic intensity used in such systems. In the present work, enhancement of the kidney stone fragmentation by using ultrasound is studied. The cavitation bubbles are found to implode faster, with more ...

  9. Synthesis of arabinoxylan fragments

    DEFF Research Database (Denmark)

    Underlin, Emilie Nørmølle; Böhm, Maximilian F.; Madsen, Robert

    , or production of commercial chemicals which are mainly obtained from fossil fuels today.The arbinoxylan fragments have a backbone of β-1,4-linked xylans with α-L-arabinose units attached at specific positions. The synthesis ultilises an efficient synthetic route, where all the xylan units can be derived from D...

  10. Graphene-sulfur nanocomposites for rechargeable lithium-sulfur battery electrodes

    Science.gov (United States)

    Liu, Jun; Lemmon, John P; Yang, Zhenguo; Cao, Yuiliang; Li, Xiaolin

    2014-06-17

    Rechargeable lithium-sulfur batteries having a cathode that includes a graphene-sulfur nanocomposite can exhibit improved characteristics. The graphene-sulfur nanocomposite can be characterized by graphene sheets with particles of sulfur adsorbed to the graphene sheets. The sulfur particles have an average diameter less than 50 nm..

  11. Anchored multi-DOF MEMS gyroscope having robust drive mode

    Science.gov (United States)

    Verma, Payal; Khonina, S. N.; Pavelyev, V. S.; Fomchenkov, S. A.; Uma, B. V.

    2016-12-01

    This paper presents the new architecture of 2-DOF (degree-of-freedom) drive mode and 1-DOF sense mode gyroscope with the concept of additional anchoring that retains all the advantages of the Dynamic Vibration Absorber (DVA) concept while being operated at high frequencies. These concepts allow reduction of the bandwidth by varying the coupling parameter during the design, thereby increasing the mechanical sensitivity. In the present design, the anchoring concept has been implemented by adding a central anchor for the sense mass. The steady state response and design concept have been devised using analytical modeling.

  12. Wave propagation in damage assessment of ground anchors

    Science.gov (United States)

    Zima, B.; Rucka, M.

    2015-07-01

    The inspection possibilities of ground anchors are limited to destructive test such as pull-out test. Guided wave propagation gives an opportunity to develop an inspection system dedicated to determine the condition of inspected element without violation of their integrity. In this paper the experimental study on wave propagation in laboratory models of ground anchors are presented. Experiments were conducted for different bonding lengths and different frequencies of excitation. Waves were generated by a piezoelectric actuator and the laser vibrometry technique was used to register velocity signals. For all tested anchors it was possible to identify the boundary between steel and concrete based on the registered reflections in wave propagation signals.

  13. Organizing signal transduction through A-kinase anchoring proteins (AKAPs).

    Science.gov (United States)

    Logue, Jeremy S; Scott, John D

    2010-11-01

    A fundamental role for protein-protein interactions in the organization of signal transduction pathways is evident. Anchoring, scaffolding and adapter proteins function to enhance the precision and directionality of these signaling events by bringing enzymes together. The cAMP signaling pathway is organized by A-kinase anchoring proteins. This family of proteins assembles enzyme complexes containing the cAMP-dependent protein kinase, phosphoprotein phosphatases, phosphodiesterases and other signaling effectors to optimize cellular responses to cAMP and other second messengers. Selected A-kinase anchoring protein signaling complexes are highlighted in this minireview. © 2010 The Authors Journal compilation © 2010 FEBS.

  14. For sale: Sulfur emissions

    International Nuclear Information System (INIS)

    Heiderscheit, J.

    1992-01-01

    The allowance trading market has started a slow march to maturity. Competitive developers should understand the risks and opportunities now presented. The marketplace for sulfur dioxide (SO 2 ) emissions allowances - the centerpiece of Title 4's acid rain reduction program - remains enigmatic 19 months after the Clean Air Act amendments of 1990 were passed. Yet it is increasingly clear that the emission allowance market will likely confound the gloom and doom of its doubters. The recently-announced $10 million dollar Wisconsin Power and Light allowance sales to Duquesne Light and the Tennessee Valley Authority are among the latest indications of momentum toward a stabilizing market. This trend puts additional pressure on independent developers to finalize their allowance strategies. Developers who understand what the allowance trading program is and what it is not, know the key players, and grasp the unresolved regulatory issues will have a new competitive advantage. The topics addressed in this article include the allowance marketplace, marketplace characteristics, the regulatory front, forward-looking strategies, and increasing marketplace activity

  15. Configuration of an inelastic flexible anchored cable

    Directory of Open Access Journals (Sweden)

    T. P. Dreyer

    1992-07-01

    Full Text Available Consider an inelastic, perfectly flexible cable with given external forces acting on the total length of the cable. The one end-point is fixed in the origin and the other end-point is anchored at a given point (a;b;c in space. The resulting configuration of the cable in space can be modelled by a system of non-linear differential equations. In this article it is shown that this continuous model of the cable can always be solved in terms of an integral. In the special case of a constant (i.e. independent of the position on the cable external force per unit length the solution is given explicitly in terms of three constants that describe the tension at the origin. These three constants are determined by the boundary values a, b and c at the other end-point, and must be calculated in general by a numerical procedure from the three resulting simultaneous non-linear equations. A few applications of this method are shown.

  16. Material Testing for Robotic Omnidirectional Anchor

    Science.gov (United States)

    Witkoe, Kevin S.

    2012-01-01

    To successfully explore near-Earth Asteroids the question of mobility emerges as the key issue for any robotic mission. When small bodies have extremely low escape velocities, traditional methods, such as wheels, would send the robot hurtling off of the asteroid's surface. To solve this problem, JPL has developed an omni-directional anchoring mechanism for use in microgravity that utilizes microspine technology. These microspines are placed in circular arrays with 16 independent carriages biasing the surface of the rock. The asperities in the surface allow the gripper to hold nearly 150N in all directions. While the gripper has been proven successful on consolidated rocks, it had yet to be tested on a variety of other surfaces that are suspected to separate the large boulders on an asteroid. Since asteroid surfaces vary widely, from friable rocks to lose ponds of regolith, the gripper was tested in a large variety of materials such as, bonded pumice, sand, gravel, and loose rocks. The forces are applied tangent, at 45 degrees, and normal to the surface of the material. The immediate results from this experiment will give insight into the gripper's effectiveness across the wide spectrum of materials found on asteroids.

  17. User's Guide for Tactical Thinking Behaviorally Anchored Rating Scales

    National Research Council Canada - National Science Library

    Phillips, Jennifer K; Ross, Karol G; Shadrick, Scott B

    2006-01-01

    .... In conjunction, measurement techniques must be developed to assess tactical thinking skills. This research product is a user's guide for the Tactical Thinking Behaviorally Anchored Rating Scales (T-BARS...

  18. New Mathematical Modelling of Stabilizing Pile with Prestressed Tieback Anchors

    Directory of Open Access Journals (Sweden)

    Cheng Huang

    2013-01-01

    Full Text Available This paper presents a novel mathematical modelling for analyzing stabilizing piles with prestressed tieback anchors. The new differential equations governing the mechanical response of the stabilizing pile are formulated and the boundary conditions considering the tie-back anchors are mathematically specified. Then, the system of differential equations is numerically solved by the high-accuracy Runge-Kutta finite difference method. A simple computer program has been written on the platform of MATLAB to run the procedure of the proposed algorithm. This approach is entirely different from the traditional finite element method used to design the anchored piles. The FEM is employed to verify the feasibility of the developed method. The comparative case study indicates that the proposed method has more higher modeling and computing efficiency than the FEM and can be an alternative method for designing the anchored pile used for slope stabilization.

  19. The anchoring bias reflects rational use of cognitive resources.

    Science.gov (United States)

    Lieder, Falk; Griffiths, Thomas L; M Huys, Quentin J; Goodman, Noah D

    2017-05-08

    Cognitive biases, such as the anchoring bias, pose a serious challenge to rational accounts of human cognition. We investigate whether rational theories can meet this challenge by taking into account the mind's bounded cognitive resources. We asked what reasoning under uncertainty would look like if people made rational use of their finite time and limited cognitive resources. To answer this question, we applied a mathematical theory of bounded rationality to the problem of numerical estimation. Our analysis led to a rational process model that can be interpreted in terms of anchoring-and-adjustment. This model provided a unifying explanation for ten anchoring phenomena including the differential effect of accuracy motivation on the bias towards provided versus self-generated anchors. Our results illustrate the potential of resource-rational analysis to provide formal theories that can unify a wide range of empirical results and reconcile the impressive capacities of the human mind with its apparently irrational cognitive biases.

  20. Anchored but not internalized: shape dependent endocytosis of nanodiamond

    Science.gov (United States)

    Zhang, Bokai; Feng, Xi; Yin, Hang; Ge, Zhenpeng; Wang, Yanhuan; Chu, Zhiqin; Raabova, Helena; Vavra, Jan; Cigler, Petr; Liu, Renbao; Wang, Yi; Li, Quan

    2017-04-01

    Nanoparticle-cell interactions begin with the cellular uptake of the nanoparticles, a process that eventually determines their cellular fate. In the present work, we show that the morphological features of nanodiamonds (NDs) affect both the anchoring and internalization stages of their endocytosis. While a prickly ND (with sharp edges/corners) has no trouble of anchoring onto the plasma membrane, it suffers from difficult internalization afterwards. In comparison, the internalization of a round ND (obtained by selective etching of the prickly ND) is not limited by its lower anchoring amount and presents a much higher endocytosis amount. Molecular dynamics simulation and continuum modelling results suggest that the observed difference in the anchoring of round and prickly NDs likely results from the reduced contact surface area with the cell membrane of the former, while the energy penalty associated with membrane curvature generation, which is lower for a round ND, may explain its higher probability of the subsequent internalization.

  1. Correlation of Persistence, Initiative and Career Anchors Categories of Students

    Directory of Open Access Journals (Sweden)

    I A Novikova

    2008-03-01

    Full Text Available The article is devoted to the analysis of the results of comparative empirical study of persistence, initiative and Career Anchors categories of the students on the basis of the systemic-functional approach.

  2. Subcloning of DNA fragments.

    Science.gov (United States)

    Struhl, K

    2001-05-01

    The essence of recombinant DNA technology is the joining of two or more separate segments of DNA to generate a single DNA molecule that is capable of autonomous replication in a given host. The simplest constructions of hybrid DNA molecules involve the cloning of insert sequences into plasmid or bacteriophage cloning vectors. The insert sequences can derive from essentially any organism, and they may be isolated directly from the genome, from mRNA, or from previously cloned DNA segments (in which case, the procedure is termed subcloning). Alternatively, insert DNAs can be created directly by DNA synthesis. This unit provides protocols for the subcloning of DNA fragments and ligation of DNA fragments in gels.

  3. The Serendipity of Fragmentation

    DEFF Research Database (Denmark)

    Leixnering, Stephan; Meyer, Renate E.

    , it was the central government’s task to coordinate, steer and control the newly emerged decentralized organizations. This raises questions about the overall design of the public sector at present. Our paper engages with the prevalent public governance phenomenon of fragmentation from a design perspective in order......Reform approaches in the public sector led to significant changes in the sector’s design. Especially NPM-inspired reform measures which had largely aimed at organizational disaggregation created pluriform landscapes of public sector organizations (PSOs). Following a core public governance principle...... form of organizing between networks and formal organization: lacking a single center and featuring multiplex and multifaceted relations within the politico-administrative apparatus and between government and PSOs, high fragmentation, local and robust action, but latent structures of significant formal...

  4. Novel telomere-anchored PCR approach for studying sexual stage telomeres in Aspergillus nidulans.

    Directory of Open Access Journals (Sweden)

    Nengding Wang

    Full Text Available Telomere length varies between germline and somatic cells of the same organism, leading to the hypothesis that telomeres are lengthened during meiosis. However, little is known about the meiotic telomere length in many organisms. In the filamentous fungus Aspergillus nidulans, the telomere lengths in hyphae and asexual spores are invariant. No study using existing techniques has determined the telomere length of the sexual ascospores due to the relatively low abundance of pure meiotic cells in A. nidulans and the small quantity of DNA present. To address this, we developed a simple and sensitive PCR strategy to measure the telomere length of A. nidulans meiotic cells. This novel technique, termed "telomere-anchored PCR," measures the length of the telomere on chromosome II-L using a small fraction of the DNA required for the traditional terminal restriction fragment (TRF Southern analysis. Using this approach, we determined that the A. nidulans ascospore telomere length is virtually identical to telomeres of other cell types from this organism, approximately 110 bp, indicating that a surprisingly strict telomere length regulation exists in the major cell types of A. nidulans. When the hyphal telomeres were measured in a telomerase reverse transcriptase (TERT knockout strain, small decreases in length were readily detected. Thus, this technique can detect telomeres in relatively rare cell types and is particularly sensitive in measuring exceptionally short telomeres. This rapid and inexpensive telomere-anchored PCR method potentially can be utilized in other filamentous fungi and types of organisms.

  5. [Development and application of bone-anchored hearing aid].

    Science.gov (United States)

    Liu, Yupeng; Yang, Jun

    2013-01-01

    Bone-anchored hearing aid is a hearing assisting technology that raise the hearing level via bone conduct and is also the only implantable hearing assisting device working by bone conduct. Because of the superior performance and simple process of implantation, it brings gospel to the patients who are not fitting the air conducting hearing devices. This article is a review of bone-anchored hearing aid from 6 aspects, including history, principle, indication, consulting, surgery and complication.

  6. Peptide-Mediated Liposome Fusion: The Effect of Anchor Positioning

    Directory of Open Access Journals (Sweden)

    Niek S. A. Crone

    2018-01-01

    Full Text Available A minimal model system for membrane fusion, comprising two complementary peptides dubbed “E” and “K” joined to a cholesterol anchor via a polyethyleneglycol spacer, has previously been developed in our group. This system promotes the fusion of large unilamellar vesicles and facilitates liposome-cell fusion both in vitro and in vivo. Whilst several aspects of the system have previously been investigated to provide an insight as to how fusion is facilitated, anchor positioning has not yet been considered. In this study, the effects of placing the anchor at either the N-terminus or in the center of the peptide are investigated using a combination of circular dichroism spectroscopy, dynamic light scattering, and fluorescence assays. It was discovered that anchoring the “K” peptide in the center of the sequence had no effect on its structure, its ability to interact with membranes, or its ability to promote fusion, whereas anchoring the ‘E’ peptide in the middle of the sequence dramatically decreases fusion efficiency. We postulate that anchoring the ‘E’ peptide in the middle of the sequence disrupts its ability to form homodimers with peptides on the same membrane, leading to aggregation and content leakage.

  7. Biogenic sulfur compounds and the global sulfur cycle

    International Nuclear Information System (INIS)

    Aneja, V.P.; Aneja, A.P.; Adams, D.F.

    1982-01-01

    Field measurements of biogenic sulfur compounds shows a great variation in concentrations and emission rates for H 2 S, DMS, CS 2 and COS. Measurements by the chamber method and estimates from micrometeorological sampling are employed to determine the earth-atmosphere flux of these gases. Much of the variation can be attributed to differences of climate and surface conditions, with marshes being a large source of biogenic sulfur (mean contribution 4 x 10 to the 6th ton/year maximum contribution 142 x 10 to the 6th ton/year). Considering that the estimated biogenic contribution needed to balance the global sulfur cycle ranges from 40- 230 x 10 to the 6th tons/year, the mean values are not sufficient to balance this cycle. Further experimental investigations are suggested in order to characterize the biogenic processes adequately

  8. Two Approaches for Using Multiple Anchors in NEAT Equating: A Description and Demonstration

    Science.gov (United States)

    Moses, Tim; Deng, Weiling; Zhang, Yu-Li

    2011-01-01

    Nonequivalent groups with anchor test (NEAT) equating functions that use a single anchor can have accuracy problems when the groups are extremely different and/or when the anchor weakly correlates with the tests being equated. Proposals have been made to address these issues by incorporating more than one anchor into NEAT equating functions. These…

  9. Pyramidal anchor stone from Baga waters of Goa, west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Tripati, S.

    . Pyramidal anchor stones have an apex hole which goes up to the round hole, however Goa anchor stone has no such perforation, but, instead has a rectangular cutting on the apex. The anchor stone is compared with Greek pyramidal anchor stones, and probably...

  10. On the Robustness of Anchoring Effects in WTP and WTA Experiments

    OpenAIRE

    Drew Fudenberg; David K Levine; Zacharias Maniadis

    2010-01-01

    We reexamine the effects of the anchoring manipulation of Ariely, Loewenstein, and Prelec (2003) on the evaluation of common market goods and find very weak anchoring effects. We perform the same manipulation on the evaluation of binary lotteries, and find no anchoring effects at all. This suggests limits on the robustness of anchoring effects. (JEL C91, D12, D44)

  11. Fragment-fragment correlations in near-binary fragmentation of C60

    International Nuclear Information System (INIS)

    Vandenbosch, R.; Henry, B.; Cooper, C.H.; Liang, J.F.; Will, D.I.

    1997-01-01

    The collision dynamics of C 60 with H 2 and He gas has been studied using reverse kinematics. A beam of C 60 - is obtained by electron attachment to neutral molecules exiting an oven and then accelerated to energies between 75 and 150 keV. The collisions take place in a windowless gas cell. We energy analyze the products in a pair of electrostatic analyzers which are oriented so that coincidences between light and heavy fragments can be observed. Our energy, and hence mass, resolution is sufficient to uniquely identify all C n clusters between n=1 and 60. The principal question we are addressing is whether heavy products in the mass range C 34 to C 56 are produced solely by sequential emission of C 2 fragments, or whether longer chains (and possibly rings) compete with C 2 emission. From our coincidence studies we have conclusive evidence that fragments such as C 8 are fragmentation partners to heavy fragments. In general we find that the products of a binary fragmentation are sufficiently excited that sequential decay follows the initial fragmentation. Although only even-n heavy fragments are observed, the coincident light fragments include both odd and even-n fragments due to subsequent fragmentation of the excited lighter partner of the initial binary fragmentation. This scenario has been confirmed by studying coincidences between two light fragments. copyright 1997 American Institute of Physics

  12. SCALING AND 4-QUARK FRAGMENTATION

    NARCIS (Netherlands)

    SCHOLTEN, O; BOSVELD, GD

    1991-01-01

    The conditions for a scaling behaviour from the fragmentation process leading to slow protons are discussed- The scaling referred to implies that the fragmentation functions depend on the light-cone momentum fraction only. It is shown that differences in the fragmentation functions for valence- and

  13. The Serendipity of Fragmentation

    DEFF Research Database (Denmark)

    Leixnering, Stephan; Meyer, Renate E.

    Reform approaches in the public sector led to significant changes in the sector’s design. Especially NPM-inspired reform measures which had largely aimed at organizational disaggregation created pluriform landscapes of public sector organizations (PSOs). Following a core public governance principle...... form of organizing between networks and formal organization: lacking a single center and featuring multiplex and multifaceted relations within the politico-administrative apparatus and between government and PSOs, high fragmentation, local and robust action, but latent structures of significant formal...

  14. Oxidative stress induces mitochondrial fragmentation in frataxin-deficient cells

    Energy Technology Data Exchange (ETDEWEB)

    Lefevre, Sophie [Mitochondria, Metals and Oxidative Stress Laboratory, Institut Jacques Monod, CNRS-Universite Paris-Diderot, Sorbonne Paris Cite, 15 rue Helene Brion, 75205 Paris cedex 13 (France); ED515 UPMC, 4 place Jussieu 75005 Paris (France); Sliwa, Dominika [Mitochondria, Metals and Oxidative Stress Laboratory, Institut Jacques Monod, CNRS-Universite Paris-Diderot, Sorbonne Paris Cite, 15 rue Helene Brion, 75205 Paris cedex 13 (France); Rustin, Pierre [Inserm, U676, Physiopathology and Therapy of Mitochondrial Disease Laboratory, 75019 Paris (France); Universite Paris-Diderot, Faculte de Medecine Denis Diderot, IFR02 Paris (France); Camadro, Jean-Michel [Mitochondria, Metals and Oxidative Stress Laboratory, Institut Jacques Monod, CNRS-Universite Paris-Diderot, Sorbonne Paris Cite, 15 rue Helene Brion, 75205 Paris cedex 13 (France); Santos, Renata, E-mail: santos.renata@ijm.univ-paris-diderot.fr [Mitochondria, Metals and Oxidative Stress Laboratory, Institut Jacques Monod, CNRS-Universite Paris-Diderot, Sorbonne Paris Cite, 15 rue Helene Brion, 75205 Paris cedex 13 (France)

    2012-02-10

    Highlights: Black-Right-Pointing-Pointer Yeast frataxin-deficiency leads to increased proportion of fragmented mitochondria. Black-Right-Pointing-Pointer Oxidative stress induces complete mitochondrial fragmentation in {Delta}yfh1 cells. Black-Right-Pointing-Pointer Oxidative stress increases mitochondrial fragmentation in patient fibroblasts. Black-Right-Pointing-Pointer Inhibition of mitochondrial fission in {Delta}yfh1 induces oxidative stress resistance. -- Abstract: Friedreich ataxia (FA) is the most common recessive neurodegenerative disease. It is caused by deficiency in mitochondrial frataxin, which participates in iron-sulfur cluster assembly. Yeast cells lacking frataxin ({Delta}yfh1 mutant) showed an increased proportion of fragmented mitochondria compared to wild-type. In addition, oxidative stress induced complete fragmentation of mitochondria in {Delta}yfh1 cells. Genetically controlled inhibition of mitochondrial fission in these cells led to increased resistance to oxidative stress. Here we present evidence that in yeast frataxin-deficiency interferes with mitochondrial dynamics, which might therefore be relevant for the pathophysiology of FA.

  15. Generic behaviours in impact fragmentation

    Energy Technology Data Exchange (ETDEWEB)

    Sator, N.; Mechkov, S.; Sausset, F. [Paris-6 Univ. Pierre et Marie Curie, Lab. de Physique Theorique de la Matiere Condensee, UMR CNRS 7600, 75 - Paris (France); Mechkov, S. [Ecole Normale Superieure, Lab. de Physique Statistique, 75 - Paris (France)

    2008-02-15

    From atomic nuclei to supernovae, including plates and rocks, every cohesive system can be broken into fragments, provided that the deposited energy is sufficiently large compared to its cohesive energy. We present a simple numerical model for investigating the general properties of fragmentation. By use of molecular dynamics simulations, we study the impact fragmentation of a solid disk of interacting particles with a wall. Regardless of the particular form of the interaction potential, the fragment size distribution exhibits a power law behaviour with an exponent that increases logarithmically with the energy deposited in the system, in agreement with experiments. We expect this behaviour to be generic in fragmentation phenomena. (authors)

  16. Fragmentation of Chitosan by Acids

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Kasaai

    2013-01-01

    Full Text Available Fragmentation of chitosan in aqueous solution by hydrochloric acid was investigated. The kinetics of fragmentation, the number of chain scissions, and polydispersity of the fragments were followed by viscometry and size exclusion chromatography. The chemical structure and the degree of N-acetylation (DA of the original chitosan and its fragments were examined by 1H NMR spectroscopy and elemental analysis. The kinetic data indicates that the reaction was of first order. The results of polydispersity and the DA suggest that the selected experimental conditions (temperature and concentration of acid were appropriate to obtain the fragments having the polydispersity and the DA similar to or slightly different from those of the original one. A procedure to estimate molecular weight of fragments as well as the number of chain scissions of the fragments under the experimental conditions was also proposed.

  17. Lunar Sulfur Capture System, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The Lunar Sulfur Capture System (LSCS) is an innovative method to recover sulfur compounds from lunar soil using sorbents derived primarily from in-situ resources....

  18. Advanced Lithium Sulfur Battery, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — CRG proposes to develop an Advanced Lithium Sulfur Battery (LSB) based on combining a novel super ion conducting ceramic electrolyte, entrapped sulfur cathode, and a...

  19. Advanced Lithium Sulfur Battery, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — CRG proposes to develop an Advanced Lithium Sulfur Battery (LSB) based on combining a novel super ion conducting ceramic electrolyte, entrapped sulfur cathode, and a...

  20. Lunar Sulfur Capture System, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The Lunar Sulfur Capture System (LSCS) is an innovative method to capture greater than 90 percent of sulfur gases evolved during thermal treatment of lunar soils....

  1. Assessing tether anchor labeling and usability in pickup trucks.

    Science.gov (United States)

    Klinich, Kathleen D; Manary, Miriam A; Malik, Laura A; Flannagan, Carol A; Jermakian, Jessica S

    2018-04-03

    The objective of this study was to investigate vehicle factors associated with child restraint tether use and misuse in pickup trucks and evaluate 4 labeling interventions designed to educate consumers on proper tether use. Volunteer testing was performed with 24 subjects and 4 different pickup trucks. Each subject performed 8 child restraint installations among the 4 pickups using 2 forward-facing restraints: a Britax Marathon G4.1 and an Evenflo Triumph. Vehicles were selected to represent 4 different implementations of tether anchors among pickups: plastic loop routers (Chevrolet Silverado), webbing routers (Ram), back wall anchors (Nissan Frontier), and webbing routers plus metal anchors (Toyota Tundra). Interventions included a diagram label, Quick Response (QR) Code linked to video instruction, coordinating text label, and contrasting text tag. Subjects used the child restraint tether in 93% of trials. However, tether use was completely correct in only 9% of trials. An installation was considered functional if the subject attached the tether to a tether anchor and had a tight installation (ignoring routing and head restraint position); 28% of subjects achieved a functional installation. The most common installation error was attaching the tether hook to the anchor/router directly behind the child restraint (near the top of the seatback) rather than placing the tether through the router and attaching it to the anchor in the adjacent seating position. The Nissan Frontier, with the anchor located on the back wall of the cab, had the highest rate of correct installations but also had the highest rate of attaching the tether to components other than the tether anchor (seat adjustor, child restraint storage hook, around head restraint). None of the labeling interventions had a significant effect on correct installation; not a single subject scanned the QR Code to access the video instruction. Subjects with the most successful installations spent extensive time

  2. Behavior of sulfur during coal pyrolysis

    Science.gov (United States)

    Shao, D.; Hutchinson, E.J.; Heidbrink, J.; Pan, W.-P.; Chou, C.-L.

    1994-01-01

    The behavior of sulfur in Illinois coals during pyrolysis was evaluated by thermogravimetry/ Fourier transform-infrared spectroscopy (TG/FT-IR) techniques. SO2, COS, and H2S were major gaseous sulfur-containing products observed during coal pyrolysis. The release rates of the gaseous sulfur species showed several peaks within the temperature ranges, which were due to the emission of different forms of sulfur in coal. ?? 1994.

  3. Vesicle Fusion Mediated by Solanesol-Anchored DNA.

    Science.gov (United States)

    Flavier, Kristina M; Boxer, Steven G

    2017-09-19

    Fusion between two lipid bilayers is one of the central processes in cell biology, playing a key role in endocytosis, exocytosis, and vesicle transport. We have previously developed a model system that uses the hybridization of complementary DNA strands to model the formation of the SNARE four-helix bundle that mediates synaptic vesicle fusion and used it to study vesicle fusion to a tethered lipid bilayer. Using single vesicle assays, 70% of observed fusion events in the DNA-lipid system are arrested at the hemifusion stage, whereas only 5% eventually go to full fusion. This may be because the diglycerol ether that anchors the DNA in the membrane spans only half the bilayer: upon hemifusion and mixing of the outer leaflets, the DNA-lipid is free to diffuse into the target membrane and away from the vesicle. Here, we test the hypothesis that the length of the membrane anchor may impact the outcome by comparing single leaflet-spanning DNA-lipid mediated vesicle fusion with fusion mediated by DNA anchored by solanesol, a C45 isoprenoid of sufficient length to span the bilayer. When the solanesol anchor was present on the incoming vesicles, target membrane, or both, ∼2-3 times as much full fusion was observed as in the DNA-lipid mediated system, as measured by lipid mixing or content transfer. These results indicate that a transmembrane anchor increases the efficiency of full fusion. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

  4. Genetic engineering of sulfur-degrading Sulfolobus

    Energy Technology Data Exchange (ETDEWEB)

    Ho, N.W.Y.

    1991-01-01

    The objectives of the proposed research is to first establish a plasmid-mediated genetic transformation system for the sulfur degrading Sulfolobus, and then to clone and overexpress the genes encoding the organic-sulfur-degrading enzymes from Sulfolobus- as well as from other microorganisms, to develop a Sulfolobus-based microbial process for the removal of both organic and inorganic sulfur from coal.

  5. 46 CFR 153.1046 - Sulfuric acid.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Sulfuric acid. 153.1046 Section 153.1046 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK....1046 Sulfuric acid. No person may liquefy frozen or congealed sulfuric acid other than by external tank...

  6. 21 CFR 582.1095 - Sulfuric acid.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Sulfuric acid. 582.1095 Section 582.1095 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS....1095 Sulfuric acid. (a) Product. Sulfuric acid. (b) Conditions of use. This substance is generally...

  7. Air Quality Criteria for Sulfur Oxides.

    Science.gov (United States)

    National Air Pollution Control Administration (DHEW), Washington, DC.

    Included is a literature review which comprehensively discusses knowledge of the sulfur oxides commonly found in the atmosphere. The subject content is represented by the 10 chapter titles: Physical and Chemical Properties and the Atmospheric Reactions of the Oxides of Sulfur; Sources and Methods of Measurements of Sulfur Oxides in the Atmosphere;…

  8. Eagle-Picher Industries Sodium Sulfur Program

    Science.gov (United States)

    Silvey, Ronald L.

    1993-02-01

    Viewgraphs of the sodium sulfur program are presented. Sodium sulfur low earth orbit (LEO) cells are described. Topics covered include cell sizes, areas of improvement, and NaS cell testing. Sodium sulfur cell and battery designs continue to evolve with significant improvement demonstrated in resistance, rechargeability, cycle life, energy density, and electrolyte characterization.

  9. Improved method for minimizing sulfur loss in analysis of particulate organic sulfur.

    Science.gov (United States)

    Park, Ki-Tae; Lee, Kitack; Shin, Kyoungsoon; Jeong, Hae Jin; Kim, Kwang Young

    2014-02-04

    The global sulfur cycle depends primarily on the metabolism of marine microorganisms, which release sulfur gas into the atmosphere and thus affect the redistribution of sulfur globally as well as the earth's climate system. To better quantify sulfur release from the ocean, analysis of the production and distribution of organic sulfur in the ocean is necessary. This report describes a wet-based method for accurate analysis of particulate organic sulfur (POS) in the marine environment. The proposed method overcomes the considerable loss of sulfur (up to 80%) that occurs during analysis using conventional methods involving drying. Use of the wet-based POS extraction procedure in conjunction with a sensitive sulfur analyzer enabled accurate measurements of cellular POS. Data obtained using this method will enable accurate assessment of how rapidly sulfur can transfer among pools. Such information will improve understanding of the role of POS in the oceanic sulfur cycle.

  10. Intermediate mass fragments emission in binary fragmentation model

    International Nuclear Information System (INIS)

    Bhattacharya, C.; Bhattacharya, S.

    1991-01-01

    Intermediate mass fragments emission in intermediate-energy nucleus-nucleus collisions has been studied in the framework of a generalized model where the fragments are assumed to be emitted from binary fissionlike decay of the fully equilibrated compound nucleus. The present formulation, with a schematic exit channel shape configuration and simple rotating liquid-drop nuclear potential, has been found to explain most of the intermediate mass fragments emission cross sections reasonably well without incorporating any free parameters in the calculation

  11. How curved membranes recruit amphipathic helices and protein anchoring motifs.

    Science.gov (United States)

    Hatzakis, Nikos S; Bhatia, Vikram K; Larsen, Jannik; Madsen, Kenneth L; Bolinger, Pierre-Yves; Kunding, Andreas H; Castillo, John; Gether, Ulrik; Hedegård, Per; Stamou, Dimitrios

    2009-11-01

    Lipids and several specialized proteins are thought to be able to sense the curvature of membranes (MC). Here we used quantitative fluorescence microscopy to measure curvature-selective binding of amphipathic motifs on single liposomes 50-700 nm in diameter. Our results revealed that sensing is predominantly mediated by a higher density of binding sites on curved membranes instead of higher affinity. We proposed a model based on curvature-induced defects in lipid packing that related these findings to lipid sorting and accurately predicted the existence of a new ubiquitous class of curvature sensors: membrane-anchored proteins. The fact that unrelated structural motifs such as alpha-helices and alkyl chains sense MC led us to propose that MC sensing is a generic property of curved membranes rather than a property of the anchoring molecules. We therefore anticipate that MC will promote the redistribution of proteins that are anchored in membranes through other types of hydrophobic moieties.

  12. Anchoring effect on first passage process in Taiwan financial market

    Science.gov (United States)

    Liu, Hsing; Liao, Chi-Yo; Ko, Jing-Yuan; Lih, Jiann-Shing

    2017-07-01

    Empirical analysis of the price fluctuations of financial markets has received extensive attention because a substantial amount of financial market data has been collected and because of advances in data-mining techniques. Price fluctuation trends can help investors to make informed trading decisions, but such decisions may also be affected by a psychological factors-the anchoring effect. This study explores the intraday price time series of Taiwan futures, and applies diffusion model and quantitative methods to analyze the relationship between the anchoring effect and price fluctuations during first passage process. Our results indicate that power-law scaling and anomalous diffusion for stock price fluctuations are related to the anchoring effect. Moreover, microscopic price fluctuations before switching point in first passage process correspond with long-term price fluctuations of Taiwan's stock market. We find that microscopic trends could provide useful information for understanding macroscopic trends in stock markets.

  13. Determination of total sulfur content via sulfur-specific chemiluminescence detection

    Energy Technology Data Exchange (ETDEWEB)

    Kubala, S.W.; Campbell, D.N. [Fluid Data, Inc., Angleton, TX (United States); DiSanzo, F.P. [Paulsboro Research Lab., NJ (United States)

    1995-12-31

    A specially designed system, based upon sulfur-specific chemiluminescence detection (SSCD), was developed to permit the determination of total sulfur content in a variety of samples. This type of detection system possesses several advantages such as excellent linearity and selectivity, low minimum detectable levels, and an equimolar response to various sulfur compounds. This paper will focus on the design and application of a sulfur-specific chemiluminescence detection system for use in determining total sulfur content in gasoline.

  14. Fragmented medial coronoid process

    International Nuclear Information System (INIS)

    Juhasz, Cs.; Juhasz, T.

    1997-01-01

    Fragmented medial coronoid process: (FCP) is often considered to be part of the osteochondrosis dissecans complex, but trauma and growth discrepancies between the radius and ulna are proposed as causes. There is little to clinically differentiate FCP, from osteochondrosis dissecans (OCD) of the elbow. Pain on, flexion-extension of the elbow and lateral rotation of the paw is a little more consistent in FCP. Radiographic examination of the elbow is important despite the, fact that radiographic signs of the FCP are often nonspecific. Excessive osteoarthrosis and superimposition of the radial head and coronoid process make identification of the FCP difficult. Craniocaudal, flexed mediolateral and 25 degree craniocaudal-lateromedial views are necessary for diagnosis. Osteophyte production is more dramatic with FCP than with OCD and suggests therefore the occurrence of OCP in many cases. Although the detached process may be seen on any view, the oblique projection offers the least obstructed view. Exposure of the joint is identical to that for OCD, that means a medial approach with osteotomy of the epicondyle. In most cases the process is loose enough to be readily apparent, but in some it is necessary to exert force on the process in order to find the cleavage plane. It is necessary to remove the osteophytes as well and to inspect and irrigate the joint carefully to remove cartilage fragments before closure. Confinement is advisable for 4 weeks before returning the dog to normal activity. The outlook for function is good if the FCP is removed before secondary degenerative joint disease is well established

  15. Rhodanese functions as sulfur supplier for key enzymes in sulfur energy metabolism.

    Science.gov (United States)

    Aussignargues, Clément; Giuliani, Marie-Cécile; Infossi, Pascale; Lojou, Elisabeth; Guiral, Marianne; Giudici-Orticoni, Marie-Thérèse; Ilbert, Marianne

    2012-06-08

    How microorganisms obtain energy is a challenging topic, and there have been numerous studies on the mechanisms involved. Here, we focus on the energy substrate traffic in the hyperthermophilic bacterium Aquifex aeolicus. This bacterium can use insoluble sulfur as an energy substrate and has an intricate sulfur energy metabolism involving several sulfur-reducing and -oxidizing supercomplexes and enzymes. We demonstrate that the cytoplasmic rhodanese SbdP participates in this sulfur energy metabolism. Rhodaneses are a widespread family of proteins known to transfer sulfur atoms. We show that SbdP has also some unusual characteristics compared with other rhodaneses; it can load a long sulfur chain, and it can interact with more than one partner. Its partners (sulfur reductase and sulfur oxygenase reductase) are key enzymes of the sulfur energy metabolism of A. aeolicus and share the capacity to use long sulfur chains as substrate. We demonstrate a positive effect of SbdP, once loaded with sulfur chains, on sulfur reductase activity, most likely by optimizing substrate uptake. Taken together, these results lead us to propose a physiological role for SbdP as a carrier and sulfur chain donor to these key enzymes, therefore enabling channeling of sulfur substrate in the cell as well as greater efficiency of the sulfur energy metabolism of A. aeolicus.

  16. A reusable suture anchor for arthroscopy psychomotor skills training.

    Science.gov (United States)

    Tillett, Edward D; Rogers, Rainie; Nyland, John

    2003-03-01

    For residents to adequately develop the early arthroscopy psychomotor skills required to better learn how to manage the improvisational situations they will encounter during actual patient cases, they need to experience sufficient practice repetitions within a contextually relevant environment. Unfortunately, the cost of suture anchors can be a practice repetition-limiting factor in learning arthroscopic knot-tying techniques. We describe a technique for creating inexpensive reusable suture anchors and provide an example of their application to repair the anterior glenoid labrum during an arthroscopy psychomotor skills laboratory training session.

  17. Fullerene-based Anchoring Groups for Molecular Electronics

    DEFF Research Database (Denmark)

    Martin, Christian A.; Ding, Dapeng; Sørensen, Jakob Kryger

    2008-01-01

    We present results on a new fullerene-based anchoring group for molecular electronics. Using lithographic mechanically controllable break junctions in vacuum we have determined the conductance and stability of single-molecule junctions of 1,4-bis(fullero[c]pyrrolidin-1-yl)benzene. The compound can...... be self-assembled from solution and has a low-bias conductance of 3 × 10-4 G0. Compared to 1,4-benzenedithiol the fullerene-anchored molecule exhibits a considerably lower conductance spread. In addition, the signature of the new compound in histograms is more significant than that of 1,4-benzenediamine...

  18. Experience-based, body-anchored qualitative research interviewing

    DEFF Research Database (Denmark)

    Stelter, Reinhard

    2010-01-01

    -anchored interviewing, and second, by an interview guide that explores a research participant's personal experience with mindfulness meditation. An excerpt from an interview is discussed to illustrate the advantages of this interview form, namely its value as a methodological instrument for qualitative research......Two theoretical constructs that lay the foundation for experience-based, body-anchored interviewing are presented: the first-person perspective and the concept of meaning. These theoretical concepts are concretized, first, by means of a methodological framework for experience-based, body...

  19. Fluctuations in the fragmentation process

    International Nuclear Information System (INIS)

    Botet, R.; Ploszajczak, M.

    1993-01-01

    Some general framework of sequential fragmentation is presented, as provided by the newly proposed Fragmentation - Inactivation - Binary model, and to study briefly its basic and universal features. This model includes as particular cases most of the previous kinetic fragmentation models. In particular it is discussed how one arrives in this framework to the critical behaviour, called the shattering transition. This model is then compared to recent data on gold multifragmentation at 600 MeV/nucl. (authors) 20 refs., 5 figs

  20. Elaboration of a model of the nuclear fragmentation and application to the method of isotopic separation of projectile fragments

    International Nuclear Information System (INIS)

    Gaimard, J.J.

    1990-10-01

    In this thesis the experimental results on the cross sections for the production of 36 P in the fragmentation of 403 MeV/u 40 Ar on a carbon target are presented. Furthermore some models of the nuclear fragmentation are elaborated and compared by means of experimental data for the production of gold and cerium isotopes in the reaction 12 C+ 209 Bi at 400 MeV/u, of chlorine, sulfur, aluminium, magnesium, and oxygen isotopes in the reactions 40 Ar+ 12 C at 600 MeV/u and 48 Ca+ 9 Be at 212 MeV/u, and of cobalt, manganese, vanadium, and scandium isotopes together with the charge distributions for A=43 and A=44 in the reactions 40 Ar+ 64 Cu at 2 GeV/u and 56 Fe+ 12 C at 600 MeV/u. (HSI)

  1. An Algebra for Program Fragments

    DEFF Research Database (Denmark)

    Kristensen, Bent Bruun; Madsen, Ole Lehrmann; Møller-Pedersen, Birger

    1985-01-01

    Program fragments are described either by strings in the concrete syntax or by constructor applications in the abstract syntax. By defining conversions between these forms, both may be intermixed. Program fragments are constructed by terminal and nonterminal symbols from the grammar and by variab......Program fragments are described either by strings in the concrete syntax or by constructor applications in the abstract syntax. By defining conversions between these forms, both may be intermixed. Program fragments are constructed by terminal and nonterminal symbols from the grammar...... and by variables having program fragments as values. Basic operations such as valuetransfer, composition and decomposition are defined for program fragments allowing more complicated operations to be implemented. Usual operations such as testing for equality are defined, and in addition more specialized operations...... such as testing that a program fragment is derivable from another and converting program fragments in concrete form to abstract form are defined. By introducing regular expressions in the grammar these may be used in program fragments in concrete form. By defining constructors for regular expressions these may...

  2. MRI of displaced meniscal fragments

    International Nuclear Information System (INIS)

    Dunoski, Brian; Zbojniewicz, Andrew M.; Laor, Tal

    2012-01-01

    A torn meniscus frequently requires surgical fixation or debridement as definitive treatment. Meniscal tears with associated fragment displacement, such as bucket handle and flap tears, can be difficult to recognize and accurately describe on MRI, and displaced fragments can be challenging to identify at surgery. A displaced meniscal fragment can be obscured by synovium or be in a location not usually evaluated at arthroscopy. We present a pictorial essay of meniscal tears with displaced fragments in patients referred to a pediatric hospital in order to increase recognition and accurate interpretation by the radiologist, who in turn can help assist the surgeon in planning appropriate therapy. (orig.)

  3. Quantum molecular study of S-methylated forms of sulfur mustard

    Science.gov (United States)

    Hamza, A.; Broch, H.; Vasilescu, D.

    1996-04-01

    An ab initio quantum molecular modeling of sulfur mustard and various S-methylated forms is presented in this work. The geometries, conformations and Mulliken charge distributions were obtained at the level HF/6-31G ∗ computations for: neutral sulfur mustard (HD); the HD + episulfonium; the 2-chloroethyl ethyl methyl sulfonium; the bis(2-chloroethyl)methyl (MeHD +) sulfonium and the bicationic form MeHD ++ obtained by loosing a chloride in the chloroethyl branch of MeHD +. The conformational and the electrostatic situations are discussed with the aim to explain a possible rationale for detoxification of sulfur mustard proposed by Mozier and Hoffman. A theoretical reaction pathway of MeHD ++ involving a closure way and a fragmentation way is proposed.

  4. Volatile earliest Triassic sulfur cycle

    DEFF Research Database (Denmark)

    Schobben, Martin; Stebbins, Alan; Algeo, Thomas J.

    2017-01-01

    Marine biodiversity decreases and ecosystem destruction during the end-Permian mass extinction (EPME) have been linked to widespread marine euxinic conditions. Changes in the biogeochemical sulfur cycle, microbial sulfate reduction (MSR), and marine dissolved sulfate concentrations during...... is based on the S isotope fractionation between sulfate and sulfide associated with MSR in natural aquatic environments. This fractionation is proxied by the difference in S isotope compositions between chromium-reducible sulfur (CRS) and carbonate-associated sulfate (CAS), i.e., δ34SCAS-CRS. We show that......, despite region-specific redox conditions, δ34SCAS-CRS exhibits a nearly invariant value of 15-16‰ in both study sections. By comparing our record with a δ34Ssulfate-sulfide density distribution for modern marine sediments, we deduce that porewater Rayleigh distillation, carbonate diagenesis, and other...

  5. The importance of anchor text for ad hoc search revisited

    NARCIS (Netherlands)

    Koolen, M.; Kamps, J.; Chen, H.-H.; Efthimiadis, E.N.; Savoy, J.; Crestani, F.; Marchand-Maillet, S.

    2010-01-01

    It is generally believed that propagated anchor text is very important for effective Web search as offered by the commercial search engines. "Google Bombs" are a notable illustration of this. However, many years of TREC Web retrieval research failed to establish the effectiveness of link evidence

  6. Comparative study of retentive anchor systems for overdentures.

    Science.gov (United States)

    Svetlize, Carlos A; Bodereau, Enrique Fernández

    2004-06-01

    This study aimed to evaluate the retention on two or four implants of eight resilient and nonresilient retentive anchors used in overdentures. Eight groups of retentive anchors were used: Dyna and Shiner (magnets); Dalla Bona and O-Ring (balls); Ceka Revax and Zaag attachments (studs); the cast bar (Dolder type) system with plastic clips; and the milled bars system. These specimens with their respective overdentures were prepared on two similar acrylic resin models with four implants (3.75 x 13 mm). Ten tensile strength tests (Instron) were performed on each group at a speed of 3 mm per minute. The statistical analysis (one-way analysis of variance, Tukey's HSD test) was considered significant. The pull force values ranged between 0.400 and 3.800 daN (International System of Units). There was a significant difference in retention in favor of the milled bars in comparison with the Ceka Revax, Hader bars, Zaag attachments, O-Ring, and Dyna groups, and a marginally significant difference compared with the Dalla Bona group. There was a highly significant difference with the Shiner magnets. The milled bar system was the most retentive anchor, with the Dalla Bona, Ceka Revax, Hader Bar, Zaag attachment, and O-Ring groups being the second most retentive. The least retentive groups were the Shiner and Dyna magnets. Proper abutment placement in the mandible and the correct selection of the retentive anchor will improve overdenture retention.

  7. Testing the specifications of parametric models using anchoring vignettes

    NARCIS (Netherlands)

    van Soest, A.H.O.; Vonkova, H.

    Comparing assessments on a subjective scale across countries or socio-economic groups is often hampered by differences in response scales across groups. Anchoring vignettes help to correct for such differences, either in parametric models (the compound hierarchical ordered probit (CHOPIT) model and

  8. Local ecological knowledge (LEK) on fish behavior around anchored FADs

    NARCIS (Netherlands)

    Macusi, Edison D.; Abreo, Neil A.S.; Babaran, Ricardo P.

    2017-01-01

    The Fishing Industry in the Philippines plays an important role in the food and employment need of Filipino fishers. By using anchored Fish Aggregating Devices (FADs or payao), the Philippine tuna fisheries was transformed into a million-dollar industry. Minimal studies on exploitation rates and

  9. Isolation by the 5 anchored PCR technique and characterization of ...

    Indian Academy of Sciences (India)

    Isolation by the 5 anchored PCR technique and characterization of eighteen microsatellite loci in horseshoe crab (Tachypleus gigas). LIEW PUI LING, ABU BAKAR ADIBAH, SOON GUAN TAN. ∗. , ANNIE CHRISTIANUS and QAMARUZ ZAMAN FARIDAH. Universiti Putra Malaysia, UPM Serdang, Selangor, 43400, Malaysia.

  10. The role of personal protective factors in anchoring psychological ...

    African Journals Online (AJOL)

    Erna Kinsey

    In this article I report on a study that focused on the concept of resilience, in order to determine the nature of personal attributes in adoles cents with ... nine key personal attributes which anchored resilience and promoted self actualisation, despite obstacle ridden circumstances. Introduction ... and result in vulnerability.

  11. The relation between career anchors, emotional intelligence and ...

    African Journals Online (AJOL)

    satisfaction. Prof. M. Coetzee and Prof. D. Schreuder are in the Department of Industrial and Organisational Psychology,. University of South Africa. E-mail: ... People's career anchors influence their career choices, life satisfaction, and job and ... employees' subjective work experiences, and job and career satisfaction.

  12. Ten Anchor Points for Teaching Principles of Marketing

    Science.gov (United States)

    Tomkovick, Chuck

    2004-01-01

    Effective marketing instructors commonly share a love for their students, an affinity for the subject matter, and a devotion to continuous quality improvement. The purpose of this article is to highlight 10 anchor points for teaching Principles of Marketing, which are designed to better engage students in the learning process. These anchor…

  13. Stable Pt clusters anchored to monovacancies on graphene sheets

    Energy Technology Data Exchange (ETDEWEB)

    Medasani, Bharat K.; Liu, Jun; Sushko, Maria L.

    2017-10-09

    Abstract

    anchor'>

  14. Analytical Model for Hook Anchor Pull-Out

    DEFF Research Database (Denmark)

    Brincker, Rune; Ulfkjær, Jens Peder; Adamsen, Peter

    1995-01-01

    A simple analytical model for the pull-out of a hook anchor is presented. The model is based on a simplified version of the fictitious crack model. It is assumed that the fracture process is the pull-off of a cone shaped concrete part, simplifying the problem by assuming pure rigid body motions...

  15. Analytical Model for Hook Anchor Pull-out

    DEFF Research Database (Denmark)

    Brincker, Rune; Ulfkjær, J. P.; Adamsen, P.

    A simple analytical model for the pull-out of a hook anchor is presented. The model is based on a simplified version of the fictitious crack model. It is assumed that the fracture process is the pull-off of a cone shaped concrete part, simplifying the problem by assuming pure rigid body motions...

  16. Culturally-Anchored Values and University Education Experience Perception

    Science.gov (United States)

    Mitsis, Ann; Foley, Patrick

    2009-01-01

    Purpose: The purpose of this paper is to examine whether business students' gender, age and culturally-anchored values affect their perceptions of their university course experience. Design/methodology/approach: Culturally diverse business students (n 1/4 548) studying at an Australian university were surveyed using previously established scales.…

  17. Empirical evidence for resource-rational anchoring and adjustment.

    Science.gov (United States)

    Lieder, Falk; Griffiths, Thomas L; M Huys, Quentin J; Goodman, Noah D

    2017-05-08

    People's estimates of numerical quantities are systematically biased towards their initial guess. This anchoring bias is usually interpreted as sign of human irrationality, but it has recently been suggested that the anchoring bias instead results from people's rational use of their finite time and limited cognitive resources. If this were true, then adjustment should decrease with the relative cost of time. To test this hypothesis, we designed a new numerical estimation paradigm that controls people's knowledge and varies the cost of time and error independently while allowing people to invest as much or as little time and effort into refining their estimate as they wish. Two experiments confirmed the prediction that adjustment decreases with time cost but increases with error cost regardless of whether the anchor was self-generated or provided. These results support the hypothesis that people rationally adapt their number of adjustments to achieve a near-optimal speed-accuracy tradeoff. This suggests that the anchoring bias might be a signature of the rational use of finite time and limited cognitive resources rather than a sign of human irrationality.

  18. Anchoring return: the role of the Solutions Strategy

    Directory of Open Access Journals (Sweden)

    Pierfrancesco Maria Natta

    2014-05-01

    Full Text Available Providing a minimum standard of living and livelihood opportunities to help anchor those who have returned is critical for the future stability and security of Afghanistan. This is one of the three main objectives of the 2012 Solutions Strategy for Afghan Refugees.

  19. A Proteomics Investigation of Anchored PKA-RI Signaling

    NARCIS (Netherlands)

    Kovanich, D.

    2013-01-01

    Compartmentalization of kinases and phosphatases plays an important role in the specificity of second messenger mediated signaling events. Localization of the cAMP-dependent protein kinase is mediated by interaction of its regulatory subunit (PKA-R) with the versatile family of A-kinase anchoring

  20. Fullerene-based Anchoring Groups for Molecular Electronics

    DEFF Research Database (Denmark)

    Martin, Christian A.; Ding, Dapeng; Sørensen, Jakob Kryger

    2008-01-01

    We present results on a new fullerene-based anchoring group for molecular electronics. Using lithographic mechanically controllable break junctions in vacuum we have determined the conductance and stability of single-molecule junctions of 1,4-bis(fullero[c]pyrrolidin-1-yl)benzene. The compound can...

  1. Modified Anchor Shaped Post Core Design for Primary Anterior Teeth

    Directory of Open Access Journals (Sweden)

    R. Rajesh

    2014-01-01

    Full Text Available Restoring severely damaged primary anterior teeth is challenging to pedodontist. Many materials are tried as a post core but each one of them has its own drawbacks. This a case report describing a technique to restore severely damaged primary anterior teeth with a modified anchor shaped post. This technique is not only simple and inexpensive but also produces better retention.

  2. Poor Anchoring Limits Dyslexics' Perceptual, Memory, and Reading Skills

    Science.gov (United States)

    Oganian, Yulia; Ahissar, Merav

    2012-01-01

    The basic deficits underlying the severe and persistent reading difficulties in dyslexia are still highly debated. One of the major topics of debate is whether these deficits are language specific, or affect both verbal and non-verbal stimuli. Recently, Ahissar and colleagues proposed the "anchoring-deficit hypothesis" (Ahissar, Lubin,…

  3. Stone anchors from the Okhamandal region, Gujarat Coast, India

    Digital Repository Service at National Institute of Oceanography (India)

    Sundaresh; Gaur, A.S.; Gudigar, P.; Tripati, S.; Vora, K.H.; Bandodkar, S.N.

    period particularly on south-western coast of the island while stone anchors were noticed on the eastern coast of the island where medieval period remains can be noticed in the form of pottery, cannons and a few stone structures. Similar type of stone...

  4. Bone-anchored hearing aids in unilateral inner ear deafness.

    NARCIS (Netherlands)

    Bosman, A.J.; Hol, M.K.S.; Snik, A.F.M.; Mylanus, E.A.M.; Cremers, C.W.R.J.

    2003-01-01

    In nine patients with unilateral deafness and normal hearing in the contralateral ear, measurements of sound localization and speech perception were obtained before intervention, with a conventional contralateral routing of sound (CROS) hearing aid and later with a bone-anchored hearing aid (BAHA)

  5. Candidacy for the bone-anchored hearing aid.

    NARCIS (Netherlands)

    Snik, A.F.M.; Bosman, A.J.; Mylanus, E.A.M.; Cremers, C.W.R.J.

    2004-01-01

    The BAHA (bone-anchored hearing aid) is a bone conduction hearing aid with percutaneous transmission of sound vibrations to the skull. The device has been thoroughly evaluated by various implant groups. These studies showed that, in audiological terms, the BAHA is superior to conventional bone

  6. The point-defect of carbon nanotubes anchoring Au nanoparticles

    DEFF Research Database (Denmark)

    Lv, Y. A.; Cui, Y. H.; Li, X. N.

    2010-01-01

    between Au clusters and CNTs by means of density functional theory calculations. Both experimental and theoretical studies show that point defects are the anchoring sites of Au nanoparticles. The mechanisms of enhanced bond between Au and CNTs via the point defects are explained by the analysis of density...

  7. Polymer fragmentation in extensional flow

    International Nuclear Information System (INIS)

    Maroja, Armando M.; Oliveira, Fernando A.; Ciesla, Michal; Longa, Lech

    2001-01-01

    In this paper we present an analysis of fragmentation of dilute polymer solutions in extensional flow. The transition rate is investigated both from theoretical and computational approaches, where the existence of a Gaussian distribution for the breaking bonds has been controversial. We give as well an explanation for the low fragmentation frequency found in DNA experiments

  8. Fracture mechanics model of fragmentation

    International Nuclear Information System (INIS)

    Glenn, L.A.; Gommerstadt, B.Y.; Chudnovsky, A.

    1986-01-01

    A model of the fragmentation process is developed, based on the theory of linear elastic fracture mechanics, which predicts the average fragment size as a function of strain rate and material properties. This approach permits a unification of previous results, yielding Griffith's solution in the low-strain-rate limit and Grady's solution at high strain rates

  9. Polymer fragmentation in extensional flow

    Energy Technology Data Exchange (ETDEWEB)

    Maroja, Armando M.; Oliveira, Fernando A.; Ciesla, Michal; Longa, Lech

    2001-06-01

    In this paper we present an analysis of fragmentation of dilute polymer solutions in extensional flow. The transition rate is investigated both from theoretical and computational approaches, where the existence of a Gaussian distribution for the breaking bonds has been controversial. We give as well an explanation for the low fragmentation frequency found in DNA experiments.

  10. Sulfur globule oxidation in green sulfur bacteria is dependent on the dissimilatory sulfite reductase system

    DEFF Research Database (Denmark)

    Holkenbrink, Carina; Ocón Barbas, Santiago; Mellerup, Anders

    2011-01-01

    Green sulfur bacteria oxidize sulfide and thiosulfate to sulfate with extracellular globules of elemental sulfur as intermediate. Here we investigated which genes are involved in the formation and consumption of these sulfur globules in the green sulfur bacterium Chlorobaculum tepidum. We show...... that sulfur globule oxidation is strictly dependent on the dissimilatory sulfite reductase (DSR) system. Deletion of dsrM/CT2244 or dsrT/CT2245 or the two dsrCABL clusters (CT0851-CT0854, CT2247-2250) abolished sulfur globule oxidation and prevented formation of sulfate from sulfide, whereas deletion of dsr...

  11. Career Anchors of United States Air Force Information Systems Workers: A Turnover Predictor

    National Research Council Canada - National Science Library

    Wynne, Lee

    2002-01-01

    ...) and the work of Schein (1987) to measure the career anchors, job satisfaction, and turnover intention of AF IS workers to determine if those whose job type and career anchor match report higher satisfaction and lower turnover...

  12. Study on effective anchorage length of anchor cable based on Gauss's function

    Science.gov (United States)

    Ren, Feng; WuShuai; Liu, Yan; Liu, Jun-yan

    2017-11-01

    In the current relevant codes and technical standards, the design of anchor cables (bars) is based on the assumption that the shear stress is distributed uniformly along the anchor segment. However, according to this assumption, the super-deep pit need a large uplift bearing capacity, which will lead to the long anchor segment and has great hidden danger in the actual engineering design. Therefore, this paper, based on the previous derived shear stress function between τ and the anchor length, we get a research suitable model-Gauss curve distribution model through the analysis of saturated clay drawing data, and strata anchor shear stress distribution is more suitable for the Gauss function model in saturated clay; at the same time, through the FLAC numerical simulation of Jinan Government Affairs Center project, we obtained the optimal anchor effective anchor length is about 10~12m, the foundation pit anchor is optimized.

  13. Historical period stone anchors from Vijaydurg on the west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Tripati, S.; Gaur, A.S.; Sundaresh; Bandodkar, S.N.

    Stone anchors are the primary antiquites in marine archaeological studies. Evidences of their evolution are noticed in India since 2500 B.C. A number of stone anchors have been recovered during the recent marine archaeological explorations at Dwarka...

  14. Retractable Robotic Anchor for Hard Rock and Granular Soils, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — ProtoInnovations, LLC, is developing an innovative retractable robotic anchor that works in hard rock and granular soils permitting anchoring and subsequent...

  15. Steel shear strength of anchors with stand-off base plates.

    Science.gov (United States)

    2013-09-01

    Sign and signal structures are often connected to concrete foundations through a stand-off annular base plate with a double-nut anchor bolt connection, which leaves exposed anchor bolt lengths below leveling nuts used in these connections. Cantilever...

  16. Biomechanical Comparison of a First- and a Second-Generation All-Soft Suture Glenoid Anchor

    Science.gov (United States)

    Erickson, John; Chiarappa, Frank; Haskel, Jonathan; Rice, Justin; Hyatt, Adam; Monica, James; Dhawan, Aman

    2017-01-01

    Background: All–soft tissue suture anchors provide advantages of decreased removal of bone and decreased glenoid volume occupied compared with traditional tap or screw-in suture anchors. Previous published data have led to biomechanical concerns with the use of first-generation all-soft suture anchors. Purpose/Hypothesis: The purpose of this study was to evaluate the load to 2-mm displacement and ultimate load to failure of a second-generation all-soft suture anchor, compared with a first-generation anchor and a traditional PEEK (polyether ether ketone) anchor. The null hypothesis was that the newer second-generation anchor will demonstrate no difference in loads to 2-mm displacement after cycling compared with first-generation all-soft suture anchors. Study Design: Controlled laboratory study. Methods: Twenty human cadaveric glenoids were utilized to create 97 total suture anchor sites, and 1 of 3 anchors were randomized and placed into each site: (1) first-generation all-soft suture anchor (Juggerknot; Biomet), (2) second-generation all-soft suture anchor (Suturefix; Smith & Nephew), and (3) a control PEEK anchor (Bioraptor; Smith & Nephew). After initial cyclic loading, load to 2 mm of displacement and ultimate load to failure were measured for each anchor. Results: After cyclic loading, the load to 2-mm displacement was significantly less in first-generation anchors compared with controls (P .05). Conclusion: The newer generation all-soft suture anchors with a theoretically more rigid construct and deployment configuration demonstrate biomechanical characteristics (specifically, with load to 2-mm displacement after cyclic loading) that are improved over first-generation all-soft suture anchors and similar to a traditional solid tap-in anchor. The configuration of these newer generation all-soft suture anchors appears to mitigate the biomechanical concerns of decreased load to failure with first-generation all–soft tissue suture anchors. Clinical Relevance

  17. Do budget balance rules anchor budget balance expectations? -- Some international evidence

    OpenAIRE

    Rülke, Jan-Christoph; Frenkel, Michael; Lis, Eliza

    2013-01-01

    This is the first study that analyzes whether budget balance expectations are anchored and whether budget balance rules effectively anchor expectations. To this end, we use a unique data set which covers budget balance expectations in 17 countries that implemented a budget balance rules. While our results are mixed concerning the general impact of budget balance rules on anchoring expectations, we do find that specific features of budget balance rules are important to successfully anchor budg...

  18. Radiolysis of Sulfuric Acid, Sulfuric Acid Monohydrate, and Sulfuric Acid Tetrahydrate and Its Relevance to Europa

    Science.gov (United States)

    Loeffler, M. J.; Hudson, R. L.; Moore, M. H.; Carlson, R. W.

    2011-01-01

    We report laboratory studies on the 0.8 MeV proton irradiation of ices composed of sulfuric acid (H2SO4), sulfuric acid monohydrate (H2SO4 H2O), and sulfuric acid tetrahydrate (H2SO4 4H2O) between 10 and 180 K. Using infrared spectroscopy, we identify the main radiation products as H2O, SO2, (S2O3)x, H3O+, HSO4(exp -), and SO4(exp 2-). At high radiation doses, we find that H2SO4 molecules are destroyed completely and that H2SO4 H2O is formed on subsequent warming. This hydrate is significantly more stable to radiolytic destruction than pure H2SO4, falling to an equilibrium relative abundance of 50% of its original value on prolonged irradiation. Unlike either pure H2SO4 or H2SO4 H2O, the loss of H2SO4 4H2O exhibits a strong temperature dependence, as the tetrahydrate is essentially unchanged at the highest irradiation temperatures and completely destroyed at the lowest ones, which we speculate is due to a combination of radiolytic destruction and amorphization. Furthermore, at the lower temperatures it is clear that irradiation causes the tetrahydrate spectrum to transition to one that closely resembles the monohydrate spectrum. Extrapolating our results to Europa s surface, we speculate that the variations in SO2 concentrations observed in the chaotic terrains are a result of radiation processing of lower hydration states of sulfuric acid and that the monohydrate will remain stable on the surface over geological times, while the tetrahydrate will remain stable in the warmer regions but be destroyed in the colder regions, unless it can be reformed by other processes, such as thermal reactions induced by diurnal cycling.

  19. Effect of different sulfur levels from various sources on brassica napus growth and soil sulfur fractions

    International Nuclear Information System (INIS)

    Khalid, R.; Khan, K.S.; Islam, M.; Yousaf, M.; Shabbir, G.

    2012-01-01

    A two year field study was conducted at two different locations in northern rain fed Punjab, Pakistan to assess the effect of different rates of sulfur application from various sources on soil sulfur fractions and growth of Brassica napus. The treatments included three sulfur sources i. e., single super phosphate, ammonium sulfate and gypsum each applied at five different rates (0, 10, 20, 30 and 40 kg S ha/sup -1/ ). Sulfur application had a significant positive effect on the growth and yield parameters of Brassica napus. Among the sulfur sources ammonium sulfate resulted in maximum increase in plant growth and yield parameters, followed by single super phosphate. Sulfur content and uptake by crop plants was significantly higher with ammonium sulfate application as compared to other two sulfur sources. Sulfur application also exerted a significant positive effect on different S fractions in the soils. On an average, 18.0% of the applied sulfur got incorporated into CaCl/sub 2/ extractable sulfur fraction, while 15.6% and 35.5% entered into adsorbed and organic sulfur fractions in the soils, respectively. The value cost ratio increased significantly by sulfur application up to 30 kg ha/sup -1/. Among sulfur sources, ammonium sulfate performed best giving the highest net return. (author)

  20. Perception of the Raison d'Etre in Anchored Instruction: An Ecological Psychology Perspective.

    Science.gov (United States)

    Young, Michael F.; Barab, Sasha A.

    1999-01-01

    Anchored instruction calls for the establishment of a macrocontext to "anchor" instruction within a realistic situation. Evidence is provided that video anchors encourage students to adopt certain contrived goals over their more naturalistic goals. Suggests that goals that enable the problem solver to detect the "raison d'etre"…

  1. Observed Score Equating Using Discrete and Passage-Based Anchor Items

    Science.gov (United States)

    Zu, Jiyun; Liu, Jinghua

    2010-01-01

    Equating of tests composed of both discrete and passage-based multiple choice items using the nonequivalent groups with anchor test design is popular in practice. In this study, we compared the effect of discrete and passage-based anchor items on observed score equating via simulation. Results suggested that an anchor with a larger proportion of…

  2. Management of subluxated capsular bag-fixated intraocular lenses using a capsular anchor

    NARCIS (Netherlands)

    Ton, Yokrat; Naftali, Modi; Lapid Gortzak, Ruth; Assia, Ehud I.

    2016-01-01

    We describe the use of the capsular anchor (AssiAnchor) to manage a subluxated intraocular lens (IOL) in the capsular bag. The anchor comprises 2 prongs that hold the anterior lens capsule and a central rod that is sutured to the scleral wall, enabling centration of the IOL-capsular bag complex. Six

  3. Biomimetic Mussel Adhesive Inspired Clickable Anchors Applied to the Functionalization of Fe3O4 Nanoparticles

    NARCIS (Netherlands)

    Goldmann, Anja S.; Schoedel, Christine; Walther, Andreas; Yuan, Jiayin; Loos, Katja; Mueller, Axel H. E.; Müller, Axel H.E.

    2010-01-01

    The functionalization of magnetite (Fe3O4) nanoparticles with dopamine-derived clickable biomimetic anchors is reported. Herein, an alkyne-modified catechol-derivative is employed as the anchor, as i) the catechol-functional anchor groups possess irreversible covalent binding affinity to Fe3O4

  4. Exploring microblog activity for the prediction of hyperlink anchors in television broadcasts

    NARCIS (Netherlands)

    Vliegendhart, R.; Liem, C.C.S.; Larson, M.A.

    2015-01-01

    In this paper, we present a social media based approach to finding anchors in video archives. We use social activity on Twitter to find topics on which people have questions about in order to select suitable anchors. The experiments were carried out on the MediaEval Search and Anchoring in Video

  5. Need total sulfur content? Use chemiluminescence

    Energy Technology Data Exchange (ETDEWEB)

    Kubala, S.W.; Campbell, D.N. [Fluid Data, Inc., Angleton, TX (United States); DiSanzo, F.P. [Mobil Technology Co., Paulsboro, NJ (United States)

    1996-09-01

    Regulations issued by the United States Environmental Protection Agency require petroleum refineries to reduce or control the amount of total sulfur present in their refined products. These legislative requirements have led many refineries to search for online instrumentation that can produce accurate and repeatable total sulfur measurements within allowed levels. Several analytical methods currently exist to measure total sulfur content. They include X-ray fluorescence (XRF), microcoulometry, lead acetate tape, and pyrofluorescence techniques. Sulfur-specific chemiluminescence detection (SSCD) has recently received much attention due to its linearity, selectivity, sensitivity, and equimolar response. However, its use has been largely confined to the area of gas chromatography. This article focuses on the special design considerations and analytical utility of an SSCD system developed to determine total sulfur content in gasoline. The system exhibits excellent linearity and selectivity, the ability to detect low minimum levels, and an equimolar response to various sulfur compounds. 2 figs., 2 tabs.

  6. Thiophenic Sulfur Compounds Released During Coal Pyrolysis.

    Science.gov (United States)

    Xing, Mengwen; Kong, Jiao; Dong, Jie; Jiao, Haili; Li, Fan

    2013-06-01

    Thiophenic sulfur compounds are released during coal gasification, carbonization, and combustion. Previous studies indicate that thiophenic sulfur compounds degrade very slowly in the environment, and are more carcinogenic than polycyclic aromatic hydrocarbons and nitrogenous compounds. Therefore, it is very important to study the principle of thiophenic sulfur compounds during coal conversion, in order to control their emission and promote clean coal utilization. To realize this goal and understand the formation mechanism of thiophenic sulfur compounds, this study focused on the release behavior of thiophenic sulfur compounds during coal pyrolysis, which is an important phase for all coal thermal conversion processes. The pyrolyzer (CDS-5250) and gas chromatography-mass spectrometry (Focus GC-DSQII) were used to analyze thiophenic sulfur compounds in situ . Several coals with different coal ranks and sulfur contents were chosen as experimental samples, and thiophenic sulfur compounds of the gas produced during pyrolysis under different temperatures and heating rates were investigated. Levels of benzothiophene and dibenzothiophene were obtained during pyrolysis at temperatures ranging from 200°C to 1300°C, and heating rates ranging from 6°C/ms to 14°C/ms and 6°C/s to 14°C/s. Moreover, the relationship between the total amount of benzothiophene and dibenzothiophene released during coal pyrolysis and the organic sulfur content in coal was also discussed. This study is beneficial for understanding the formation and control of thiophenic sulfur compounds, since it provides a series of significant results that show the impact that operation conditions and organic sulfur content in coal have on the amount and species of thiophenic sulfur compounds produced during coal pyrolysis.

  7. 21 CFR 184.1095 - Sulfuric acid.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Sulfuric acid. 184.1095 Section 184.1095 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN... Substances Affirmed as GRAS § 184.1095 Sulfuric acid. (a) Sulfuric acid (H2SO4, CAS Reg. No. 7664-93-9), also...

  8. Thiophenic Sulfur Compounds Released During Coal Pyrolysis

    Science.gov (United States)

    Xing, Mengwen; Kong, Jiao; Dong, Jie; Jiao, Haili; Li, Fan

    2013-01-01

    Abstract Thiophenic sulfur compounds are released during coal gasification, carbonization, and combustion. Previous studies indicate that thiophenic sulfur compounds degrade very slowly in the environment, and are more carcinogenic than polycyclic aromatic hydrocarbons and nitrogenous compounds. Therefore, it is very important to study the principle of thiophenic sulfur compounds during coal conversion, in order to control their emission and promote clean coal utilization. To realize this goal and understand the formation mechanism of thiophenic sulfur compounds, this study focused on the release behavior of thiophenic sulfur compounds during coal pyrolysis, which is an important phase for all coal thermal conversion processes. The pyrolyzer (CDS-5250) and gas chromatography–mass spectrometry (Focus GC-DSQII) were used to analyze thiophenic sulfur compounds in situ. Several coals with different coal ranks and sulfur contents were chosen as experimental samples, and thiophenic sulfur compounds of the gas produced during pyrolysis under different temperatures and heating rates were investigated. Levels of benzothiophene and dibenzothiophene were obtained during pyrolysis at temperatures ranging from 200°C to 1300°C, and heating rates ranging from 6°C/ms to 14°C/ms and 6°C/s to 14°C/s. Moreover, the relationship between the total amount of benzothiophene and dibenzothiophene released during coal pyrolysis and the organic sulfur content in coal was also discussed. This study is beneficial for understanding the formation and control of thiophenic sulfur compounds, since it provides a series of significant results that show the impact that operation conditions and organic sulfur content in coal have on the amount and species of thiophenic sulfur compounds produced during coal pyrolysis. PMID:23781126

  9. Optimal suture anchor direction in arthroscopic lateral ankle ligament repair.

    Science.gov (United States)

    Yoshimura, Ichiro; Hagio, Tomonobu; Noda, Masahiro; Kanazawa, Kazuki; Minokawa, So; Yamamoto, Takuaki

    2017-05-26

    In this study, the distance between the insertion point of the suture anchors and posterior surface of the fibula during arthroscopic lateral ankle ligament repair was investigated on computed tomography (CT) images. The hypothesis of this study was that there is an optimal insertional direction of the suture anchor to avoid anchor-related complications. One hundred eleven ankles of 98 patients who had undergone three-dimensional CT scans for foot or ankle disorders without deformity of the fibula were assessed (59 males, 52 females; median age 25.5 years; age range 12-78 years). The shortest distance from the insertion point of the suture anchor to the deepest point of the fossa/top of the convex aspect of the fibula was measured on the axial plane, tilting from the longitudinal axis of the fibula at 90°, 75°, 60°, and 45°. The distance from the insertion point of the suture anchor to the posterior surface of the fibula was also measured in a direction parallel to the sagittal plane of the lateral surface of the talus on the axial plane, tilting from the longitudinal axis of the fibula at 90°, 75°, 60°, and 45°. The posterior fossa was observed in all cases on the 90° and 75° images. The distance from the insertion point to the posterior surface of the fibula in the parallel direction was 15.0 ± 3.4 mm at 90°, 17.5 ± 3.2 mm at 75°, 21.7 ± 3.3 mm at 60°, and 25.7 ± 3.6 mm at 45°. The posterior points in the parallel direction were located on the posterior fossa in 36.0% of cases at 90°, in 12.6% at 75°, and in 0.0% at 60° and 45°. The suture anchor should be directed from anterior to posterior at an angle of <45° to the longitudinal axis of the fibula, parallel to the lateral surface of the talus, to avoid passing through the fibula. Cohort study, Level III.

  10. The spectroscopy of fission fragments

    International Nuclear Information System (INIS)

    Phillips, W.R.

    1998-01-01

    High-resolution measurements on γ rays from fission fragments have provided a rich source of information, unobtainable at the moment in any other way, on the spectroscopy of neutron-rich nuclei. In recent years important data have been obtained on the yrast- and near yrast-structure of neutron-rich fission fragments. We discuss the scope of measurements which can be made on prompt gamma rays from secondary fission fragments, the techniques used in the experiments and some results recently obtained. (author)

  11. The spectroscopy of fission fragments

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, W.R. [Department of Physics and Astronomy, University of Manchester, Manchester, M13 9PL (United Kingdom); Collaboration: La Direction des Sciences de la Matiere du CEA (FR); Le Fonds National de la Recherche Scientifique de Belgique (BE)

    1998-12-31

    High-resolution measurements on {gamma} rays from fission fragments have provided a rich source of information, unobtainable at the moment in any other way, on the spectroscopy of neutron-rich nuclei. In recent years important data have been obtained on the yrast- and near yrast-structure of neutron-rich fission fragments. We discuss the scope of measurements which can be made on prompt gamma rays from secondary fission fragments, the techniques used in the experiments and some results recently obtained. (author) 24 refs., 8 figs., 1 tab.

  12. Charles H. Winston and Confederate Sulfuric Acid

    Science.gov (United States)

    Reithmiller, Steven

    1995-07-01

    Sulfuric acid turned out to be one of the critical chemicals made in the South during the Civil War. It was necessary for the manufacture of mercury fulminate which was used in the production of percussion caps and sulfuric acid was used in the Daniells cell to produce electricity. Charles H. Winston, president of the Richmond Female Institute and later professor at the University of Richmond (VA) was instrumental in the establishment of a plant to manufacture sulfuric acid in Charlotte, North Carolina. His patent and method of manufacture plus the uses of sulfuric acid during the Civil War are discussed.

  13. Constrained Active Learning for Anchor Link Prediction Across Multiple Heterogeneous Social Networks.

    Science.gov (United States)

    Zhu, Junxing; Zhang, Jiawei; Wu, Quanyuan; Jia, Yan; Zhou, Bin; Wei, Xiaokai; Yu, Philip S

    2017-08-03

    Nowadays, people are usually involved in multiple heterogeneous social networks simultaneously. Discovering the anchor links between the accounts owned by the same users across different social networks is crucial for many important inter-network applications, e.g., cross-network link transfer and cross-network recommendation. Many different supervised models have been proposed to predict anchor links so far, but they are effective only when the labeled anchor links are abundant. However, in real scenarios, such a requirement can hardly be met and most anchor links are unlabeled, since manually labeling the inter-network anchor links is quite costly and tedious. To overcome such a problem and utilize the numerous unlabeled anchor links in model building, in this paper, we introduce the active learning based anchor link prediction problem. Different from the traditional active learning problems, due to the one-to-one constraint on anchor links, if an unlabeled anchor link a = ( u , v ) is identified as positive (i.e., existing), all the other unlabeled anchor links incident to account u or account v will be negative (i.e., non-existing) automatically. Viewed in such a perspective, asking for the labels of potential positive anchor links in the unlabeled set will be rewarding in the active anchor link prediction problem. Various novel anchor link information gain measures are defined in this paper, based on which several constraint active anchor link prediction methods are introduced. Extensive experiments have been done on real-world social network datasets to compare the performance of these methods with state-of-art anchor link prediction methods. The experimental results show that the proposed Mean-entropy-based Constrained Active Learning (MC) method can outperform other methods with significant advantages.

  14. Constrained Active Learning for Anchor Link Prediction Across Multiple Heterogeneous Social Networks

    Directory of Open Access Journals (Sweden)

    Junxing Zhu

    2017-08-01

    Full Text Available Nowadays, people are usually involved in multiple heterogeneous social networks simultaneously. Discovering the anchor links between the accounts owned by the same users across different social networks is crucial for many important inter-network applications, e.g., cross-network link transfer and cross-network recommendation. Many different supervised models have been proposed to predict anchor links so far, but they are effective only when the labeled anchor links are abundant. However, in real scenarios, such a requirement can hardly be met and most anchor links are unlabeled, since manually labeling the inter-network anchor links is quite costly and tedious. To overcome such a problem and utilize the numerous unlabeled anchor links in model building, in this paper, we introduce the active learning based anchor link prediction problem. Different from the traditional active learning problems, due to the one-to-one constraint on anchor links, if an unlabeled anchor link a = ( u , v is identified as positive (i.e., existing, all the other unlabeled anchor links incident to account u or account v will be negative (i.e., non-existing automatically. Viewed in such a perspective, asking for the labels of potential positive anchor links in the unlabeled set will be rewarding in the active anchor link prediction problem. Various novel anchor link information gain measures are defined in this paper, based on which several constraint active anchor link prediction methods are introduced. Extensive experiments have been done on real-world social network datasets to compare the performance of these methods with state-of-art anchor link prediction methods. The experimental results show that the proposed Mean-entropy-based Constrained Active Learning (MC method can outperform other methods with significant advantages.

  15. A Single-Site Iron(III-Salan Catalyst for Converting COS to Sulfur-Containing Polymers

    Directory of Open Access Journals (Sweden)

    Ge-Ge Gu

    2017-10-01

    Full Text Available An iron(III complex of tetradentate N,N′-disubstituted bis(aminophenoxide (designated as salan, a saturated version of the corresponding salen ligand with a sterically hindered organic base anchored on the ligand framework, can selectively mediate the conversion of carbonyl sulfide to sulfur-containing polymers by the copolymerization with epoxides. This single-site catalyst exhibits broad substrate scope, and the resultant copolymers have completely alternating structures. In addition, this catalyst is efficient in producing diblock copolymers, suggesting a living polymerization nature.

  16. Multiphoton imaging: a view to understanding sulfur mustard lesions

    Science.gov (United States)

    Werrlein, Robert J. S.; Madren-Whalley, Janna S.

    2003-07-01

    It is well known that topical exposure to sulfur mustard (SM) produces persistent, incapacitating blisters of the skin. However, the primary lesions effecting epidermal-dermal separation and disabling of mechanisms for cutaneous repair remain uncertain. Immunofluorescent staining plus multiphoton imaging of human epidermal tissues and keratinocytes exposed to SM (400 μM x 5 min)have revealed that SM disrupts adhesion-complex molecules which are also disrupted by epidermolysis bullosa-type blistering diseases of the skin. Images of keratin-14 showed early, progressive, postexposure collapse of the K5/K14 cytoskeleton that resulted in ventral displacement of the nuclei beneath its collapsing filaments. This effectively corrupted the dynamic filament assemblies that link basal-cell nuclei to the extracellular matrix via α6β4-integrin and laminin-5. At 1 h postexposure, there was disruption in the surface organization of α6β4 integrins, associated displacement of laminin-5 anchoring sites and a concomitant loss of functional asymmetry. Accordingly, our multiphoton images are providing compelling evidence that SM induces prevesicating lesions that disrupt the receptor-ligand organization and cytoskeletal systems required for maintaining dermal-epidermal attachment, signal transduction, and polarized mobility.

  17. Genomic and Evolutionary Perspectives on Sulfur Metabolism in Green Sulfur Bacteria

    DEFF Research Database (Denmark)

    Frigaard, Niels-Ulrik; Bryant, Donald A.

    2008-01-01

    Green sulfur bacteria (GSB) are anaerobic photoautotrophs that oxidize sulfide, elemental sulfur, thiosulfate, ferrous iron, and hydrogen for growth. We present here an analysis of the distribution and evolution of enzymes involved in oxidation of sulfur compounds in GSB based on genome sequence...

  18. The biggest stone anchors (Indo-Arab type) from Mithi Virdi, Bhavnagar, west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Gaur, A.S.; Sundaresh; Kumar, B.

    ) 4367 3871 4041 4399 1323 Note: Weight of 1 Cubic m stone is 2600 kgs and then 10% correction applied to first 4 anchors. DISCUSSION Marine archaeological explorations along the Indian coast during the last two decades brought to light a large number...-called Indo-Arab type anchors have been noticed. The state of the anchors suggests that they have not been used and one of the anchors is actually noticed on the anchor. It has a rough surface and sharp edges. The sections on both ends are rectangular...

  19. Cyclic loading biomechanical analysis of the pullout strengths of rotator cuff and glenoid anchors: 2013 update.

    Science.gov (United States)

    Barber, F Alan; Herbert, Morley A

    2013-05-01

    The purpose of this study was to evaluate the biomechanical and design characteristics of newer suture anchors under cyclic loading. Suture anchors were tested in fresh porcine cortical and cancellous bone by cyclic loading (10 to 100 N for 200 cycles) followed by destructive testing parallel to the insertion axis at 12.5 mm per second. End points included ultimate failure load, displacement at 100 and 200 cycles, failure mode, and stiffness. Anchors tested included ReelX (Stryker Endoscopy, San Jose, CA); Footprint Ultra PK (4.5 and 5.5 mm) (Smith & Nephew, Andover, MA); TwinFix (4.5, 5.5, and 6.5 mm made from polyether ether ketone [PEEK], hydroxyapatite [HA], and titanium [Ti]) (Smith & Nephew Endoscopy, Andover, MA); Morphix (2.5 and 5.5 mm) (MedShape Solutions, Atlanta, GA); CrossFT BC (ConMed-Linvatec, Largo, FL); JuggerKnot (1.5 and 2.8 mm) (Biomet Sports Medicine, Warsaw, IN); Healicoil (Smith & Nephew Endoscopy, Andover, MA); Quattro (X, Link, and GL) (Cayenne Medical, Scottsdale, AZ); Healix (Biocryl Rapide [BR], PEEK, and Ti) (DePuy Mitek, Raynham, MA); Twin Loop (3.5 mm, PEEK) (Stryker Endoscopy, San Jose, CA); PressFT (2.1 and 2.6 mm) (ConMed Linvatec, Largo FL); Y-Knot (ConMed Linvatec, Largo FL); Gryphon (BR and PEEK) (DePuy Mitek, Raynham, MA); and Iconix (1, 2, and 3) (Stryker Endoscopy, San Jose, CA). Rotator cuff anchors showed greater failure loads than did glenoid anchors in metaphyseal bone (rotator cuff anchors 448 N v glenoid anchors 296 N) (P = .001) and cancellous bone (rotator cuff anchors 435 N v glenoid anchors 225 N) (P strengths than did glenoid anchors, regardless of bone type. TwinFix anchors showed more cyclic displacement than did other rotator cuff anchors (except the ReelX and Morphix anchors) and the glenoid anchors tested. The failure mode was dependent on the specific anchor. Suture anchor constructs tested showed that failure load is dependent on anchor type (rotator cuff anchor or glenoid anchor) but not on anchor location

  20. Anomalous temperature-dependent anchoring in liquid crystals mediated by thermodynamic smectic wetting sheets

    Science.gov (United States)

    Aya, Satoshi; Araoka, Fumito

    2017-11-01

    We present an unusual temperature dependence of polar anchoring torque in a nematic liquid crystal contacting with a perfluoropolymer surface. Whereas the anchoring torque is conventionally expected to increase with decreasing temperature, we show that the polar anchoring torque in the present system decreases with decreasing temperature. This causes an orientational transition from planar to vertical during cooling. We explain the origin of this phenomenon as the result of thermodynamic growth and spreading of surface-localized smectic wetting sheets. We clearly show that the coverage of these wetting sheets on the surface creates a vertical state that violates the initial planar anchoring in the bulk, thereby reducing the effective polar anchoring torque.

  1. Optimization Analysis Model of Self-Anchored Suspension Bridge

    Directory of Open Access Journals (Sweden)

    Pengzhen Lu

    2014-01-01

    Full Text Available The hangers of self-anchored suspension bridge need to be tensioned suitably during construction. In view of this point, a simplified optimization calculation method of cable force for self-anchored suspension bridge has been developed based on optimization theories, such as minimum bending energy method, and internal force balanced method, influence matrix method. Meanwhile, combined with the weak coherence of main cable and the adjacently interaction of hanger forces, a simplified analysis method is developed using MATLAB, which is then compared with the optimization method that consider the main cable's geometric nonlinearity with software ANSYS in an actual example bridge calculation. This contrast proves the weak coherence of main cable displacement and the limitation of the adjacent cable force influence. Furthermore, a tension program that is of great reference value has been developed; some important conclusions, advices, and attention points have been summarized.

  2. Anchoring and Overconfidence: The Influence of Culture and Cognitive Abilities

    Directory of Open Access Journals (Sweden)

    Czerwonka Monika

    2017-09-01

    Full Text Available Anchoring and overconfidence are some of the best-known biases in psychology and behavioral finance literature. While a number of studies have investigated the evidence of these biases and explored the motives and human factors that contribute to the one’s susceptibility to the effects, little is known about the cultural factors behind these heuristic biases. This paper aims to fill the research gap and shows the differences in proneness to the anchoring effect and overconfidence in two samples of students from Poland and India. The purpose of the study is twofold: to analyze susceptibility to behavioral effects relative to cultural background; and to consider the subjects’ cognitive abilities as a potential factor in their exposure to behavioral biases and confirm that subjects with higher cognitive skills, measured by the cognitive reflection test (CRT display less susceptibility to the above heuristic biases.

  3. Fullerene-based anchoring groups for molecular electronics.

    Science.gov (United States)

    Martin, Christian A; Ding, Dapeng; Sørensen, Jakob Kryger; Bjørnholm, Thomas; van Ruitenbeek, Jan M; van der Zant, Herre S J

    2008-10-08

    We present results on a new fullerene-based anchoring group for molecular electronics. Using lithographic mechanically controllable break junctions in vacuum we have determined the conductance and stability of single-molecule junctions of 1,4-bis(fullero[c]pyrrolidin-1-yl)benzene. The compound can be self-assembled from solution and has a low-bias conductance of 3 x 10(-4) G0. Compared to 1,4-benzenedithiol the fullerene-anchored molecule exhibits a considerably lower conductance spread. In addition, the signature of the new compound in histograms is more significant than that of 1,4-benzenediamine, probably owing to a more stable adsorption motif. Statistical analyses of the breaking of the junctions confirm the stability of the fullerene-gold bond.

  4. Organization, 'Anchoring' of Knowledge, and Innovative Activity in Construction

    DEFF Research Database (Denmark)

    Drejer, Ina; Vinding, Anker Lund

    2006-01-01

    The construction industry is characterised by the widespread use of project organisation. It has been suggested that the relatively low level of innovative activity in the industry can be explained by the temporary nature of firm boundary-crossing projects. Survey data from the Danish construction...... industry is used to investigate the importance of learning and 'anchoring' of project-specific knowledge at the firm level for participation in innovative activities. The data cover both the overall Danish construction industry and a specific region, North Jutland, which has a relatively high...... specialisation of construction workers. Latent class and regression analyses reveal that firms that make extensive use of partnering, together with internal product and process evaluation and knowledge diffusion (labelled 'knowledge-anchoring mechanisms'), are more likely to participate in innovative activities...

  5. Complications of bone-anchored hearing aid implantation.

    Science.gov (United States)

    Hobson, J C; Roper, A J; Andrew, R; Rothera, M P; Hill, P; Green, K M

    2010-02-01

    Bone-anchored hearing aid implantations have been performed in Manchester for over 20 years. This study examined a range of variables that can occur during the implantation process, and the effect they may have on successful outcome. Retrospective study and literature review. Tertiary referral centre in central Manchester. Details of 602 bone-anchored hearing aid implantation procedures were retrieved from the departmental database. The overall complication rate was 23.9 per cent. The rate of revision surgery was 12.1 per cent. This study involved a significantly larger number of patients than any previously reported, similar study. Possible reasons for differences in outcomes, and recommendations for best practice, are discussed.

  6. QGP and Modified Jet Fragmentation

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Xin-Nian

    2005-04-18

    Recent progresses in the study of jet modification in hotmedium and their consequences in high-energy heavy-ion collisions are reviewed. In particular, I will discuss energy loss for propagating heavy quarks and the resulting modified fragmentation function. Medium modification of the parton fragmentation function due to quark recombination are formulated within finite temperature field theory and their implication on the search for deconfined quark-gluon plasma is also discussed.

  7. Construction of tubular polypyrrole-wrapped biomass-derived carbon nanospheres as cathode materials for lithium–sulfur batteries

    International Nuclear Information System (INIS)

    Yu, Qiuhong; Lu, Yang; Peng, Tao; Hou, Xiaoyi; Luo, Rongjie; Wang, Yange; Yan, Hailong; Luo, Yongsong; Liu, Xianming; Kim, Jang-Kyo

    2017-01-01

    A promising hybrid material composed of tubular polypyrrole (T-PPy)-wrapped monodisperse biomass-derived carbon nanospheres (BCSs) was first synthesized successfully via a simple hydrothermal approach by using watermelon juice as the carbon source, and further used as an anchoring object for sulfur (S) of lithium–sulfur (Li–S) batteries. The use of BCSs with hydrophilic nature as a framework could provide large interface areas between the active materials and electrolyte, and improve the dispersion of T-PPy, which could help in the active material utilization. As a result, BCS@T-PPy/S as a cathode material exhibited a high capacity of 1143.6 mA h g −1 and delivered a stable capacity up to 685.8 mA h g −1 after 500 cycles at 0.5 C, demonstrating its promising application for rechargeable Li–S batteries. (paper)

  8. Crystal structures of two thiacalix[4]arene derivatives anchoring four ...

    Indian Academy of Sciences (India)

    Administrator

    Abstract. The crystal structures of two thiacalixarene derivatives anchoring thiadiazole functional groups at lower rim, C60H72O4S12N8 (1), C64H80O4S12N8 (2), have been determined by single crystal X-ray diffraction. The thiacalix[4]arene framework in both 1 and 2 adopts the 1,3-alternate conformation. Com- pound 1 ...

  9. Crystal structures of two thiacalix [4] arene derivatives anchoring ...

    Indian Academy of Sciences (India)

    The crystal structures of two thiacalixarene derivatives anchoring thiadiazole functional groups at lower rim, C60H72O4S12N8 (1), C64H80O4S12N8 (2), have been determined by single crystal X-ray diffraction. The thiacalix[4]arene framework in both 1 and 2 adopts the 1,3-alternate conformation. Compound 1 forms a 1-D ...

  10. Improved anchoring of SSS with vacuum barrier to avoid displacement

    CERN Document Server

    Capatina, O; Foreste, A; Parma, V; Renaglia, T; Quesnel, J

    2009-01-01

    As presented in the previous speech, the incident in sector 3-4 of the LHC caused a high pressure build-up inside the cryostat insulation vacuum resulting in high longitudinal forces acting on the insulation vacuum barriers. This resulted in braking floor and floor fixations of the SSS with vacuum barrier. The strategy of improving anchoring of SSS with vacuum barrier to avoid displacement is presented and discussed.

  11. Robust Object Tracking Using Valid Fragments Selection.

    Science.gov (United States)

    Zheng, Jin; Li, Bo; Tian, Peng; Luo, Gang

    Local features are widely used in visual tracking to improve robustness in cases of partial occlusion, deformation and rotation. This paper proposes a local fragment-based object tracking algorithm. Unlike many existing fragment-based algorithms that allocate the weights to each fragment, this method firstly defines discrimination and uniqueness for local fragment, and builds an automatic pre-selection of useful fragments for tracking. Then, a Harris-SIFT filter is used to choose the current valid fragments, excluding occluded or highly deformed fragments. Based on those valid fragments, fragment-based color histogram provides a structured and effective description for the object. Finally, the object is tracked using a valid fragment template combining the displacement constraint and similarity of each valid fragment. The object template is updated by fusing feature similarity and valid fragments, which is scale-adaptive and robust to partial occlusion. The experimental results show that the proposed algorithm is accurate and robust in challenging scenarios.

  12. A legged anchoring mechanism for capsule endoscopes using micropatterned adhesives.

    Science.gov (United States)

    Glass, Paul; Cheung, Eugene; Sitti, Metin

    2008-12-01

    This paper presents a new concept for an anchoring mechanism to enhance existing capsule endoscopes. The mechanism consists of three actuated legs with compliant feet lined with micropillar adhesives to be pressed into the intestine wall to anchor the device at a fixed location. These adhesive systems are inspired by gecko and beetle foot hairs. Single-leg and full capsule mathematical models of the forces generated by the legs are analyzed to understand capsule performance. Empirical friction models for the interaction of the adhesives with an intestinal substrate were experimentally determined in vitro using dry and oil-coated elastomer micropillar arrays with 140 microm pillar diameter, 105 microm spacing between pillars, and an aspect ratio of 1:1 on fresh porcine small intestine specimens. Capsule prototypes were also tested in a simulated intestine environment and compared with predicted peristaltic loads to assess the viability of the proposed design. The experimental results showed that a deployed 10 gr capsule robot can withstand axial peristaltic loads and anchor reliably when actuation forces are greater than 0.27 N using dry micropillars. Required actuation forces may be reduced significantly by using micropillars coated with a thin silicone oil layer.

  13. Do anchor investors create value for initial public offerings? An empirical investigation

    Directory of Open Access Journals (Sweden)

    Seshadev Sahoo

    2017-12-01

    Full Text Available The concept of anchor investors was introduced by the market regulator, Securities Exchange Board of India (SEBI, to bring transparency in the book building mechanism. We examine anchor investors' investment in initial public offerings (IPOs to determine how they create value for issuing firms and participating investors. Using a database of 135 IPOs issued in the Indian market through book building mechanism during 2009–2014, we find that anchor investors' investment in IPOs reduces underpricing. Larger subscription from retail investors for anchor-supported IPOs indicates that anchor investors' participation is viewed as a credible attestation of quality of the issue. We document that anchor-supported IPOs are more liquid and less volatile in the short run. We also find that by controlling for other factors such as offer size, subscription rate and age of the firm, a part of the underpricing is reduced by anchor investors.

  14. Characterization of forced degradation products of torasemide through MS tools and explanation of unusual losses observed during mass fragmentation of drug and degradation products through density functional theory.

    Science.gov (United States)

    Kurmi, Moolchand; Patel, Neha; Jhajra, Shalu; Bharatam, Prasad V; Singh, Saranjit

    2017-10-25

    Mass spectrometry tools (HRMS/LC-HRMS, MS n , and/or on-line H/D exchange) were employed to establish mass fragmentation pattern of torasemide and to characterize its degradation products. During collision-induced dissociation, multiple rearrangement processes and unusual losses of sulfur (S), sulfanyl (HS), sulfur dioxide (SO 2 ), sulphinic acid radical (HSO 2 ), sulfur monoxide (SO), carbon monoxide (CO), formyl radical (CHO) and C 5 H 3 NOS were observed. The same were successfully explained by study of energy profiles, established by application of density functional theory (DFT). Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Sulfur Dioxide Analyzer Instrument Handbook

    Energy Technology Data Exchange (ETDEWEB)

    Springston, Stephen R. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2016-05-01

    The Sulfur Dioxide Analyzer measures sulfur dioxide based on absorbance of UV light at one wavelength by SO2 molecules which then decay to a lower energy state by emitting UV light at a longer wavelength. Specifically, SO2 + hυ1 →SO2 *→SO2 + hυ2 The emitted light is proportional to the concentration of SO2 in the optical cell. External communication with the analyzer is available through an Ethernet port configured through the instrument network of the AOS systems. The Model 43i-TLE is part of the i-series of Thermo Scientific instruments. The i-series instruments are designed to interface with external computers through the proprietary Thermo Scientific iPort Software. However, this software is somewhat cumbersome and inflexible. Brookhaven National Laboratory (BNL) has written an interface program in National Instruments LabView that both controls the Model 43i-TLE Analyzer AND queries the unit for all measurement and housekeeping data. The LabView vi (the software program written by BNL) ingests all raw data from the instrument and outputs raw data files in a uniform data format similar to other instruments in the AOS and described more fully in Section 6.0 below.

  16. The Relationship Between Corrosion and the Biological Sulfur Cycle

    National Research Council Canada - National Science Library

    Little, Brenda

    2000-01-01

    .... Sulfur and sulfur compounds, including sulfides, bisulfides, hydrogen sulfide (H2S), thiosulfates, polythionates and sulfuric acid, may be trapped or bound up in biofilms causing direct corrosion of materials...

  17. Recent progress on perturbative QCD fragmentation functions

    International Nuclear Information System (INIS)

    Cheung, K.

    1995-05-01

    The recent development of perturbative QCD (PQCD) fragmentation functions has strong impact on quarkonium production. I shall summarize B c meson production based on these PQCD fragmentation functions, as well as, the highlights of some recent activities on applying these PQCD fragmentation functions to explain anomalous J/ψ and ψ' production at the Tevatron. Finally, I discuss a fragmentation model based on the PQCD fragmentation functions for heavy quarks fragmenting into heavy-light mesons

  18. Sulfur-carbon nanocomposites and their application as cathode materials in lithium-sulfur batteries

    Energy Technology Data Exchange (ETDEWEB)

    Liang, Chengdu; Dudney, Nancy J.; Howe, Jane Y.

    2017-08-01

    The invention is directed in a first aspect to a sulfur-carbon composite material comprising: (i) a bimodal porous carbon component containing therein a first mode of pores which are mesopores, and a second mode of pores which are micropores; and (ii) elemental sulfur contained in at least a portion of said micropores. The invention is also directed to the aforesaid sulfur-carbon composite as a layer on a current collector material; a lithium ion battery containing the sulfur-carbon composite in a cathode therein; as well as a method for preparing the sulfur-composite material.

  19. Coordination of dibensothiophenes and corannulenes to organometallic ruthenium (II) fragments

    Energy Technology Data Exchange (ETDEWEB)

    Vecchi, Paul Anthony [Iowa State Univ., Ames, IA (United States)

    2005-01-01

    This dissertation contains five papers in the format required for journal publication which describe (in part) my research accomplishments as a graduate student at Iowa State University. This work can be broadly categorized as the binding of weakly-coordinating ligands to cationic organometallic ruthenium fragments, and consists of two main areas of study. Chapters 2-4 are investigations into factors that influence the binding of dibenzothiophenes to [Cp'Ru(CO)2(+ fragments, where Cp' = η5-C5H5 (Cp) and η5-C5Me5 (Cp*). Chapters 5 and 6 present the synthesis and structural characterization of complexes containing corannulene buckybowls that are η6-coordinated to [Cp*Ru(+ fragments. The first chapter contains a brief description of the difficulty in lowering sulfur levels in diesel fuel along with a review of corannulene derivatives and their metal complexes. After the final paper is a short summary of the work herein (Chapter 7). Each chapter is independent, and all equations, schemes, figures, tables, references, and appendices in this dissertation pertain only to the chapter in which they appear.

  20. Comparative Genomics of Green Sulfur Bacteria

    DEFF Research Database (Denmark)

    Ussery, David; Davenport, C; Tümmler, B

    2010-01-01

    Eleven completely sequenced Chlorobi genomes were compared in oligonucleotide usage, gene contents, and synteny. The green sulfur bacteria (GSB) are equipped with a core genome that sustains their anoxygenic phototrophic lifestyle by photosynthesis, sulfur oxidation, and CO(2) fixation. Whole...... weight of 10(6), and are probably instrumental for the bacteria to generate their own intimate (micro)environment....

  1. 21 CFR 182.3862 - Sulfur dioxide.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Sulfur dioxide. 182.3862 Section 182.3862 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives § 182.3862 Sulfur...

  2. The adsorption of sulfur by microporous materials

    NARCIS (Netherlands)

    Steijns, M.; Mars, P.

    1976-01-01

    The sorption of sulfur by the zeolites NaX (= 13X) and CaA (= 5A) and an activated charcoal prepared from sugar was investigated at temperatures between 150 and 350°C and relative sulfur pressures between 10−4 and 10−1. The adsorbate-adsorbate interaction indicated by the S-shaped isotherm for the

  3. Sulfuric Acid and Water: Paradoxes of Dilution

    Science.gov (United States)

    Leenson, I. A.

    2004-01-01

    On equilibrium properties of aqueous solutions of sulfuric acid, Julius Thomsen has marked that the heat evolved on diluting liquid sulfuric acid with water is a continuous function of the water used, and excluded absolutely the acceptance of definite hydrates as existing in the solution. Information about thermochemical measurement, a discussion…

  4. Sulfur Removal by Adding Iron During the Digestion Process of High-sulfur Bauxite

    Science.gov (United States)

    Zhanwei, Liu; Hengwei, Yan; Wenhui, Ma; Keqiang, Xie; Dunyong, Li; Licong, Zheng; Pengfei, Li

    2018-04-01

    This paper proposes a novel approach to sulfur removal by adding iron during the digestion process. Iron can react with high-valence sulfur (S2O3 2-, SO3 2-, SO4 2-) to generate S2- at digestion temperature, and then S2- enter red mud in the form of Na3FeS3 to be removed. As iron dosage increases, high-valence sulfur concentration decreases, but the concentration of S2- increases; sulfur digestion rate decreases while sulfur content in red mud markedly increases; the alumina digestion rate, conversely, remains fairly stable. So sulfur can be removed completely by adding iron in digestion process, which provide a theoretical basis for the effective removal of sulfur in alumina production process.

  5. Implications of lipid moiety in oligomerization and immunoreactivities of GPI-anchored proteins

    Science.gov (United States)

    Seong, Jihyoun; Wang, Yetao; Kinoshita, Taroh; Maeda, Yusuke

    2013-01-01

    Glycosylphosphatidylinositol (GPI) enriches GPI-anchored proteins (GPI-AP) in lipid rafts by intimate interaction of its lipid moiety with sphingolipids and cholesterol. In addition to such lipid-lipid interactions, it has been reported that GPI may interact with protein moiety linked to GPI and affect protein conformations because GPI delipidation reduced immunoreactivities of protein. Here, we report that GPI-APs that have not undergone fatty acid remodeling exhibit reduced immunoreactivities in Western blotting, similar to delipidated proteins, compared with normal remodeled GPI-APs. In contrast, immunostaining in flow cytometry and immunoprecipitation did not show significant differences between remodeled and unremodeled GPI-APs. Moreover, detection with premixed primary/secondary antibody complexes or Fab fragments eliminated this difference in Western blotting. These results indicate that normally remodeled GPI enhanced oligomerization of GPI-APs and that inefficient oligomerization of unremodeled GPI-APs was responsible for reduced immunoreactivities. Moreover, the reduction in immunoreactivities of delipidated GPI-APs was most likely caused by the same effect. Finally, by chemical cross-linking of surface proteins in living cells and cell killing assay using a pore-forming bacterial toxin, we showed that enhanced oligomerization by GPI-remodeling occurs under a physiological membrane environment. Thus, this study clarifies the significance of GPI fatty acid remodeling in oligomerization of GPI-APs and provides useful information for technical studies of these cell components. PMID:23378600

  6. Engineering antibody fitness and function using membrane-anchored display of correctly folded proteins.

    Science.gov (United States)

    Karlsson, Amy J; Lim, Hyung-Kwon; Xu, Hansen; Rocco, Mark A; Bratkowski, Matthew A; Ke, Ailong; DeLisa, Matthew P

    2012-02-10

    A hallmark of the bacterial twin-arginine translocation (Tat) pathway is its ability to export folded proteins. Here, we discovered that overexpressed Tat substrate proteins form two distinct, long-lived translocation intermediates that are readily detected by immunolabeling methods. Formation of the early translocation intermediate Ti-1, which exposes the N- and C-termini to the cytoplasm, did not require an intact Tat translocase, a functional Tat signal peptide, or a correctly folded substrate. In contrast, formation of the later translocation intermediate, Ti-2, which exhibits a bitopic topology with the N-terminus in the cytoplasm and C-terminus in the periplasm, was much more particular, requiring an intact translocase, a functional signal peptide, and a correctly folded substrate protein. The ability to directly detect Ti-2 intermediates was subsequently exploited for a new protein engineering technology called MAD-TRAP (membrane-anchored display for Tat-based recognition of associating proteins). Through the use of just two rounds of mutagenesis and screening with MAD-TRAP, the intracellular folding and antigen-binding activity of a human single-chain antibody fragment were simultaneously improved. This approach has several advantages for library screening, including the unique involvement of the Tat folding quality control mechanism that ensures only native-like proteins are displayed, thus eliminating poorly folded sequences from the screening process. Copyright © 2011 Elsevier Ltd. All rights reserved.

  7. Poly(glycidyl ether)-Based Monolayers on Gold Surfaces: Control of Grafting Density and Chain Conformation by Grafting Procedure, Surface Anchor, and Molecular Weight.

    Science.gov (United States)

    Heinen, Silke; Weinhart, Marie

    2017-03-07

    For a meaningful correlation of surface coatings with their respective biological response reproducible coating procedures, well-defined surface coatings, and thorough surface characterization with respect to layer thickness and grafting density are indispensable. The same applies to polymeric monolayer coatings which are intended to be used for, e.g., fundamental studies on the volume phase transition of surface end-tethered thermoresponsive polymer chains. Planar gold surfaces are frequently used as model substrates, since they allow a variety of straightforward surface characterization methods. Herein we present reproducible grafting-to procedures performed with thermoresponsive poly(glycidyl ether) copolymers composed of glycidyl methyl ether (GME) and ethyl glycidyl ether (EGE). The copolymers feature different molecular weights (2 kDa, 9 kDa, 24 kDa) and are equipped with varying sulfur-containing anchor groups in order to achieve adjustable grafting densities on gold surfaces and hence control the tethered polymers' chain conformation. We determined "wet" and "dry" thicknesses of these coatings by QCM-D and ellipsometry measurements and deduced anchor distances and degrees of chain overlap of the polymer chains assembled on gold. Grafting under cloud point conditions allowed for higher degrees of chain overlap compared to grafting from a good solvent like ethanol, independent of the used sulfur-containing anchor group for polymers with low (2 kDa) and medium (9 kDa) molecular weights. By contrast, the achieved grafting densities and thus chain overlaps of surface-tethered polymers with high (24 kDa) molecular weights were identical for both grafting methods. Monolayers prepared from an ethanolic solution of poly(glycidyl ether)s equipped with sterically demanding disulfide-containing anchors revealed the lowest degrees of chain overlap. The ratio of the radius of gyration to the anchor distance (2 R g /l) of the latter coating was found to be lower than 1

  8. Diversity Profile of Microbes Associated with Anaerobic Sulfur Oxidation in an Upflow Anaerobic Sludge Blanket Reactor Treating Municipal Sewage

    Science.gov (United States)

    Aida, Azrina A.; Kuroda, Kyohei; Yamamoto, Masamitsu; Nakamura, Akinobu; Hatamoto, Masashi; Yamaguchi, Takashi

    2015-01-01

    We herein analyzed the diversity of microbes involved in anaerobic sulfur oxidation in an upflow anaerobic sludge blanket (UASB) reactor used for treating municipal sewage under low-temperature conditions. Anaerobic sulfur oxidation occurred in the absence of oxygen, with nitrite and nitrate as electron acceptors; however, reactor performance parameters demonstrated that anaerobic conditions were maintained. In order to gain insights into the underlying basis of anaerobic sulfur oxidation, the microbial diversity that exists in the UASB sludge was analyzed comprehensively to determine their identities and contribution to sulfur oxidation. Sludge samples were collected from the UASB reactor over a period of 2 years and used for bacterial 16S rRNA gene-based terminal restriction fragment length polymorphism (T-RFLP) and next-generation sequencing analyses. T-RFLP and sequencing results both showed that microbial community patterns changed markedly from day 537 onwards. Bacteria belonging to the genus Desulforhabdus within the phylum Proteobacteria and uncultured bacteria within the phylum Fusobacteria were the main groups observed during the period of anaerobic sulfur oxidation. Their abundance correlated with temperature, suggesting that these bacterial groups played roles in anaerobic sulfur oxidation in UASB reactors. PMID:25817585

  9. Not all nutrition claims are perceived equal: anchoring effects and moderating mechanisms in food advertising.

    Science.gov (United States)

    Paek, Hye-Jin; Yoon, Hye Jin; Hove, Thomas

    2011-03-01

    Despite the increased use of health claims in food advertising, few studies have investigated how specific nutrition claims have differential effects depending on how they are presented. In this context, the current study tests the anchoring hypothesis. Anchoring refers to a common human tendency to evaluate information differently depending on the presence or absence of a numerical "anchor" or reference point. Two (pilot and main) experimental studies explore anchoring effects on audience response to food advertising both directly and moderated by cognitive, motivational, and message factors. The pilot study finds that food product ads employing nutrition claims with an anchor rather than without an anchor generate two results: First, participants perceive the product to have lower fat/lower calorie contents (anchoring hypothesis); second, they prefer the messages with an anchor over those without an anchor. The main study reports that when anchoring is successfully evoked, it produces favorable attitudes toward the ad, favorable attitudes toward the brand, and purchase intention-but only when moderated by health orientation, claim believability, and nutrition knowledge. Practical implications are provided with respect to regulatory guidelines and effective communication strategies for promoting low-fat and low-calorie products in food advertising.

  10. Fragmentation properties of 6Li

    International Nuclear Information System (INIS)

    Lovas, R.G.; Kruppa, A.T.; Beck, R.; Dickmann, F.

    1987-01-01

    The α+d and t+τ cluster structure of 6 Li is described in a microscopic α+d cluster model through quantities that enter into the description of cluster fragmentation processes. The states of the separate clusters α, d, t and τ are described as superpositions of Os Slater determinants belonging to different potential size parameters. To describe both the 6 Li and fragment state realistically, nucleon-nucleon forces optimized for the used model state spaces were constructed. The fragmentation properties predicted by them slightly differ from those calculated with some forces of common use provided the latter are modified so as to reproduce the α, d and 6 Li energies. (author) 61 refs.; 9 figs

  11. Hands as markers of fragmentation

    Directory of Open Access Journals (Sweden)

    A. Barnard

    2005-07-01

    Full Text Available Margaret Atwood is an internationally read, translated, and critiqued writer whose novels have established her as one of the most esteemed authors in English (McCombs & Palmer, 1991:1. Critical studies of her work deal mainly with notions of identity from psychoanalytical perspectives. This study has identified a gap in current critical studies on Atwood’s works, namely the challenging of textual unity which is paralleled in the challenging of the traditional (single narrative voice. The challenging of textual unity and the single narrative voice brings about the fragmentation of both. This article will focus on the role that hands play as markers of fragmentation in “The Blind Assassin” (2000. In the novel, the writing hand destabilises the narrative voice, since it is not connected to the voice of a single author. If the author of the text – the final signified – is eliminated, the text becomes fragmentary and open, inviting the reader to contribute to the creation of meaning. Hands play a signficant role in foregrounding the narrator’s fragmented identity, and consequently, the fragmentation of the text. We will investigate this concept in the light of Roland Barthes’ notion of the scriptor, whose hand is metaphorically severed from his or her “voice”. Instead of the text being a unified entity, it becomes unstable and it displays the absence of hierarchical textual levels. Based mainly on Barthes’ writings, this article concludes that hands foreground the narrator’s fragmented identity, which is paralleled in the fragmented text.

  12. Sulfur isotope studies of biogenic sulfur emissions at Wallops Island, Virginia

    International Nuclear Information System (INIS)

    Hitchcock, D.R.; Black, M.S.; Herbst, R.P.

    1978-03-01

    This research attempted to determine whether it is possible to measure the stable sulfur isotope distributions of atmospheric particulate and gaseous sulphur, and to use this information together with measurements of the ambient levels of sulfur gases and particulate sulfate and sodium in testing certain hypotheses. Sulfur dioxide and particulate sulfur samples were collected at a coastal marine location and their delta (34)S values were determined. These data were used together with sodium concentrations to determine the presence of biogenic sulfur and the identity of the biological processes producing it. Excess (non-seasalt) sulfate levels ranged from 2 to 26 micrograms/cu m and SO2 from 1 to 9 ppb. Analyses of air mass origins and lead concentrations indicated that some anthropogenic contaminants were present on all days, but the isotope data revealed that most of the atmospheric sulfur originated locally from the metabolism of bacterial sulfate reducers on all days, and that the atmospheric reactions leading to the production of sulfate from this biogenic sulfur source are extremely rapid. Delta 34 S values of atmospheric sulfur dioxide correlated well with those of excess sulfate, and implied little or no sulfur isotope fractionation during the oxidation of sulfur gases to sulfate

  13. Multiple sulfur isotopes fractionations associated with abiotic sulfur transformations in Yellowstone National Park geothermal springs.

    Science.gov (United States)

    Kamyshny, Alexey; Druschel, Gregory; Mansaray, Zahra F; Farquhar, James

    2014-01-01

    The paper presents a quantification of main (hydrogen sulfide and sulfate), as well as of intermediate sulfur species (zero-valent sulfur (ZVS), thiosulfate, sulfite, thiocyanate) in the Yellowstone National Park (YNP) hydrothermal springs and pools. We combined these measurements with the measurements of quadruple sulfur isotope composition of sulfate, hydrogen sulfide and zero-valent sulfur. The main goal of this research is to understand multiple sulfur isotope fractionation in the system, which is dominated by complex, mostly abiotic, sulfur cycling. Water samples from six springs and pools in the Yellowstone National Park were characterized by pH, chloride to sulfate ratios, sulfide and intermediate sulfur species concentrations. Concentrations of sulfate in pools indicate either oxidation of sulfide by mixing of deep parent water with shallow oxic water, or surface oxidation of sulfide with atmospheric oxygen. Thiosulfate concentrations are low (hot parent water body. In two pools δ(34)S values of sulfate varied significantly from the values calculated from this model. Sulfur isotope fractionation between ZVS and hydrogen sulfide was close to zero at pH < 4. At higher pH zero-valent sulfur is slightly heavier than hydrogen sulfide due to equilibration in the rhombic sulfur-polysulfide - hydrogen sulfide system. Triple sulfur isotope ((32)S, (33)S, (34)S) fractionation patterns in waters of hydrothermal pools are more consistent with redox processes involving intermediate sulfur species than with bacterial sulfate reduction. Small but resolved differences in ∆(33)S among species and between pools are observed. The variation of sulfate isotopic composition, the origin of differences in isotopic composition of sulfide and zero-valent sulfur, as well as differences in ∆(33)S of sulfide and sulfate are likely due to a complex network of abiotic redox reactions, including disproportionation pathways.

  14. Mini-open Subpectoral Biceps Tenodesis Using a Suture Anchor.

    Science.gov (United States)

    Arena, Christopher; Dhawan, Aman

    2017-10-01

    The long head of the biceps (LHB) tendon is a potential source of shoulder pain encountered by orthopaedic surgeons. A multitude of approaches to addressing LHB tendinopathy have been described. These include various surgical techniques such as tenodesis versus tenotomy, an arthroscopic versus an open approach, and differing methods of tenodesis fixation. Our preferred approach to addressing LHB tendinopathy is through a mini-open approach using a double-loaded 4.5-mm suture anchor. This Technical Note with accompanying video describes our technique for performing this procedure, as well as supporting clinical evidence and technical pearls.

  15. Flexoelectric instability in nematic cells with weak anchoring energy

    International Nuclear Information System (INIS)

    Lelidis, I.; Barbero, G.

    2003-01-01

    We analyze the role of weak anchoring energy boundary conditions on electric field induced structural instabilities of flexoelectric origin in a finite thickness nematic cell. It is shown that stripe-like domain patterns can appear above a rather low threshold voltage V th ∼0.3 V. V th and the wave-length of the instability at the threshold vary as the square root of the cell thickness. Our analysis is valid when the extrapolation length is large with respect to the nematic slab thickness

  16. Codend selectivity in a commercial Danish anchor seine

    DEFF Research Database (Denmark)

    Noack, Thomas; Frandsen, Rikke; Krag, Ludvig Ahm

    2017-01-01

    Danish seining (or anchor seining) is a fishing technique that is gaining increasing attention because itis considered to be a fuel-efficient fishing method with low environmental impact. However, scientificdocumentation of the selectivity characteristics of Danish seines is lacking, and the gear...... (Pleuronectesplatessa), was best described by models that combine two or three logistic models, which indicated thatmore than one selection process was at work. Selectivity of cod (Gadus morhua) was best described by aRichard curve and selectivity of red gurnard (Chelidonichthys lucernus) by a logistic curve...

  17. Trafficking of glycosylphosphatidylinositol anchored proteins from the endoplasmic reticulum to the cell surface

    Science.gov (United States)

    Muñiz, Manuel; Riezman, Howard

    2016-01-01

    In eukaryotes, many cell surface proteins are attached to the plasma membrane via a glycolipid glycosylphosphatidylinositol (GPI) anchor. GPI-anchored proteins (GPI-APs) receive the GPI anchor as a conserved posttranslational modification in the lumen of the endoplasmic reticulum (ER). After anchor attachment, the GPI anchor is structurally remodeled to function as a transport signal that actively triggers the delivery of GPI-APs from the ER to the plasma membrane, via the Golgi apparatus. The structure and composition of the GPI anchor confer a special mode of interaction with membranes of GPI-APs within the lumen of secretory organelles that lead them to be differentially trafficked from other secretory membrane proteins. In this review, we examine the mechanisms by which GPI-APs are selectively transported through the secretory pathway, with special focus on the recent progress made in their actively regulated export from the ER and the trans-Golgi network. PMID:26450970

  18. Quantum mechanical fragment methods based on partitioning atoms or partitioning coordinates.

    Science.gov (United States)

    Wang, Bo; Yang, Ke R; Xu, Xuefei; Isegawa, Miho; Leverentz, Hannah R; Truhlar, Donald G

    2014-09-16

    atoms for capping dangling bonds, and we have shown that they can greatly improve the accuracy. Finally we present a new approach that goes beyond QM/MM by combining the convenience of molecular mechanics with the accuracy of fitting a potential function to electronic structure calculations on a specific system. To make the latter practical for systems with a large number of degrees of freedom, we developed a method to interpolate between local internal-coordinate fits to the potential energy. A key issue for the application to large systems is that rather than assigning the atoms or monomers to fragments, we assign the internal coordinates to reaction, secondary, and tertiary sets. Thus, we make a partition in coordinate space rather than atom space. Fits to the local dependence of the potential energy on tertiary coordinates are arrayed along a preselected reaction coordinate at a sequence of geometries called anchor points; the potential energy function is called an anchor points reactive potential. Electrostatically embedded fragment methods and the anchor points reactive potential, because they are based on treating an entire system by quantum mechanical electronic structure methods but are affordable for large and complex systems, have the potential to open new areas for accurate simulations where combined QM/MM methods are inadequate.

  19. Fragmented nature: consequences for biodiversity

    NARCIS (Netherlands)

    Olff, H.; Ritchie, M.E.

    2002-01-01

    We discuss how fragmentation of resources and habitat operate differently on species diversity across spatial scales, ranging from positive effects on local species coexistence to negative effect on intermediate spatial scales, to again positive effects on large spatial and temporal scales. Species

  20. Fragmented nature : consequences for biodiversity

    NARCIS (Netherlands)

    Olff, Han; Ritchie, Mark E.

    2002-01-01

    We discuss how fragmentation of resources and habitat operate differently on species diversity across spatial scales, ranging from positive effects on local species coexistence to negative effect on intermediate spatial scales, to again positive effects on large spatial and temporal scales. Species

  1. Nuclear energy release from fragmentation

    Energy Technology Data Exchange (ETDEWEB)

    Li, Cheng [The Key Laboratory of Beam Technology and Material Modification of Ministry of Education, College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China); Souza, S.R. [Instituto de Física, Universidade Federal do Rio de Janeiro Cidade Universitária, Caixa Postal 68528, 21945-970 Rio de Janeiro (Brazil); Tsang, M.B. [The Key Laboratory of Beam Technology and Material Modification of Ministry of Education, College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China); National Superconducting Cyclotron Laboratory and Physics and Astronomy Department, Michigan State University, East Lansing, MI 48824 (United States); Zhang, Feng-Shou, E-mail: fszhang@bnu.edu.cn [The Key Laboratory of Beam Technology and Material Modification of Ministry of Education, College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China); Center of Theoretical Nuclear Physics, National Laboratory of Heavy Ion Accelerator of Lanzhou, Lanzhou 730000 (China)

    2016-08-15

    It is well known that binary fission occurs with positive energy gain. In this article we examine the energetics of splitting uranium and thorium isotopes into various numbers of fragments (from two to eight) with nearly equal size. We find that the energy released by splitting {sup 230,232}Th and {sup 235,238}U into three equal size fragments is largest. The statistical multifragmentation model (SMM) is applied to calculate the probability of different breakup channels for excited nuclei. By weighing the probability distributions of fragment multiplicity at different excitation energies, we find the peaks of energy release for {sup 230,232}Th and {sup 235,238}U are around 0.7–0.75 MeV/u at excitation energy between 1.2 and 2 MeV/u in the primary breakup process. Taking into account the secondary de-excitation processes of primary fragments with the GEMINI code, these energy peaks fall to about 0.45 MeV/u.

  2. Phthalocyanides sensitized fragmentation of proteins

    Czech Academy of Sciences Publication Activity Database

    Klementová, S.; Tothová, D.; Revaková, R.; Kasková, M.; Wagnerová, Dana Marie

    2001-01-01

    Roč. 5, č. 1 (2001), s. 13-18 ISSN 0972-0626 R&D Projects: GA ČR GA203/96/1322 Institutional research plan: CEZ:AV0Z4032918 Keywords : phthalocyanides * photosensitied fragmentation of proteins Subject RIV: CA - Inorganic Chemistry

  3. Sulfurized carbon: a class of cathode materials for high performance lithium/sulfur batteries

    Directory of Open Access Journals (Sweden)

    Sheng S. Zhang

    2013-12-01

    Full Text Available Liquid electrolyte lithium/sulfur (Li/S batteries cannot come into practical applications because of many problems such as low energy efficiency, short cycle life, and fast self-discharge. All these problems are related to the dissolution of lithium polysulfide, a series of sulfur reduction intermediates, in the liquid electrolyte, and resulting parasitic reactions with the Li anode. Covalently binding sulfur onto carbon surface is a solution to completely eliminate the dissolution of lithium polysulfide and make the Li/S battery viable for practical applications. This can be achieved by replacing elemental sulfur with sulfurized carbon as the cathode material. This article reviews the current efforts on this subject and discusses the syntheses, electrochemical properties, and prospects of the sulfurized carbon as a cathode material in the rechargeable Li/S batteries.

  4. Sulfur-Kβ /sub emission studies on sulfur-bearing heterocycles

    International Nuclear Information System (INIS)

    Phillips, D.R.; Andermann, G.G.; Fujiwara, F.

    1986-01-01

    Sulfur-K/β /sub x-ray fluorescence spectroscopy (XFS) has been used to study the electronic structure and bonding in sulfur-bearing heterocycles. XFS not only has the capability of experimentally measuring valence electron energies in molecular species, but can also provide intensity data which can help define the nature of the molecular orbitals defined by the electrons. This report discusses the feasibility of using XFS as an analytical tool for the determination of total and specific sulfur heterocycle content in samples. A variety of compounds were studied. These include thiophene, thiophene derivatives, tetranydrothiophene, several more complex saturated and unsaturated sulfur heterocycles, and heterocycles containing both sulfur and nitrogen. The sulfur-K/β /sub spectra were obtained using a double crystal spectrometer which provided an instrumental resolution of about 0.7 eV

  5. Graphene oxide as a sulfur immobilizer in high performance lithium/sulfur cells

    Science.gov (United States)

    Zhang, Yuegang; Cairns, Elton J.; Ji, Liwen; Rao, Mumin

    2017-06-06

    The loss of sulfur cathode material as a result of polysulfide dissolution causes significant capacity fading in rechargeable lithium/sulfur cells. Embodiments of the invention use a chemical approach to immobilize sulfur and lithium polysulfides via the reactive functional groups on graphene oxide. This approach obtains a uniform and thin (.about.tens of nanometers) sulfur coating on graphene oxide sheets by a chemical reaction-deposition strategy and a subsequent low temperature thermal treatment process. Strong interaction between graphene oxide and sulfur or polysulfides demonstrate lithium/sulfur cells with a high reversible capacity of 950-1400 mAh g.sup.-1, and stable cycling for more than 50 deep cycles at 0.1 C.

  6. Graphene oxide as a sulfur immobilizer in high performance lithium/sulfur cells

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Yuegang; Cairns, Elton J.; Ji, Liwen; Rao, Mumin

    2017-12-26

    The loss of sulfur cathode material as a result of polysulfide dissolution causes significant capacity fading in rechargeable lithium/sulfur cells. Embodiments of the invention use a chemical approach to immobilize sulfur and lithium polysulfides via the reactive functional groups on graphene oxide. This approach obtains a uniform and thin (.about.tens of nanometers) sulfur coating on graphene oxide sheets by a chemical reaction-deposition strategy and a subsequent low temperature thermal treatment process. Strong interaction between graphene oxide and sulfur or polysulfides demonstrate lithium/sulfur cells with a high reversible capacity of 950-1400 mAh g.sup.-1, and stable cycling for more than 50 deep cycles at 0.1 C.

  7. Membrane curvature enables N-Ras lipid anchor sorting to liquid-ordered membrane phases

    DEFF Research Database (Denmark)

    Larsen, Jannik Bruun; Jensen, Martin Borch; Bhatia, Vikram Kjøller

    2015-01-01

    Trafficking and sorting of membrane-anchored Ras GTPases are regulated by partitioning between distinct membrane domains. Here, in vitro experiments and microscopic molecular theory reveal membrane curvature as a new modulator of N-Ras lipid anchor and palmitoyl chain partitioning. Membrane curva...... curvature was essential for enrichment in raft-like liquid-ordered phases; enrichment was driven by relief of lateral pressure upon anchor insertion and most likely affects the localization of lipidated proteins in general....

  8. Sulfur cycling, retention, and mobility in soils: A review

    Science.gov (United States)

    Pamela J. Edwards

    1998-01-01

    Sulfur inputs to forests originate from mineral weathering, atmospheric deposition, and organic matter decomposition. In the soil, sulfur occurs in organic and inorganic forms and is cycled within and between those forms via mobilization, immobilization, mineralization, oxidation, and reduction processes. Organic sulfur compounds are largely immobile. Inorganic sulfur...

  9. 46 CFR 151.50-21 - Sulfuric acid.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Sulfuric acid. 151.50-21 Section 151.50-21 Shipping... BULK LIQUID HAZARDOUS MATERIAL CARGOES Special Requirements § 151.50-21 Sulfuric acid. (a) How sulfuric acid may be carried. (1) Sulfuric acid of concentration of 77.5 percent (1.7019 specific gravity) (59.8...

  10. Experimental Volcanology: Fragmentation and Permeability

    Science.gov (United States)

    Spieler, O.

    2005-12-01

    An increasing number of scientists design new experiments to analyse processes that control the dynamics of explosive eruptions. There research is mostly coupled to numerical models and aims toward its controlling parameters. The fragmentation process, its threshold and the speed of the fragmentation wave as well as the energy consumed by the fragmentation are some hot spots of the experimental volcanology. Analysing the fragmentation behaviour of volcaniclastics as close to the natural system as possible, we found a number of physical constrains. Identifying the porosity as determining factor of the threshold, we realised that neither threshold nor the speed of the fragmentation process are solely controlled by the rock density. The later results of the shock tube type apparatus lead to the analysis of the specific surface area and permeability as direct links to textural features. Permeability analysis performed in a modified shock tube type apparatus, show two clear, distinct trends for dome rock and pyroclastic samples. The specific surface determined by Argon sorbtion (BET) as well as textural features of pumices from Campi Flegrei, Montserrat and Krakatoa (1883) give in contrary evidence of a more complex story. Large spherical, or ellipsoidal bubbles around fractured crystals prove that the high permeability of the pumice has partially developed after the fixing of the bubble size distribution. This puts up the question, if permeability measurements on pyroclastic samples reveal relevant numbers! The surface tension controlled 'self sealing' behaviour of surfaces from foaming obsidian hinders in situ measurements. Close textural investigations will have to clarify how the 'post process' samples deviate from the syneruptive conduit filling.

  11. The VERDI fission fragment spectrometer

    International Nuclear Information System (INIS)

    Fregeau, M. O.; Brys, T.; Gamboni, T.; Geerts, W.; Oberstedt, S.; Oberstedt, A.; Borcea, R.

    2013-01-01

    The VERDI time-of-flight spectrometer is dedicated to measurements of fission product yields and of prompt neutron emission data. Pre-neutron fission-fragment masses will be determined by the double time-of-flight (TOF) technique. For this purpose an excellent time resolution is required. The time of flight of the fragments will be measured by electrostatic mirrors located near the target and the time signal coming from silicon detectors located at 50 cm on both sides of the target. This configuration, where the stop detector will provide us simultaneously with the kinetic energy of the fragment and timing information, significantly limits energy straggling in comparison to legacy experimental setup where a thin foil was usually used as a stop detector. In order to improve timing resolution, neutron transmutation doped silicon will be used. The high resistivity homogeneity of this material should significantly improve resolution in comparison to standard silicon detectors. Post-neutron fission fragment masses are obtained form the time-of-flight and the energy signal in the silicon detector. As an intermediary step a diamond detector will also be used as start detector located very close to the target. Previous tests have shown that poly-crystalline chemical vapour deposition (pCVD) diamonds provides a coincidence time resolution of 150 ps not allowing complete separation between very low-energy fission fragments, alpha particles and noise. New results from using artificial single-crystal diamonds (sCVD) show similar time resolution as from pCVD diamonds but also sufficiently good energy resolution. (authors)

  12. SNP discovery and chromosome anchoring provide the first physically-anchored hexaploid oat map and reveal synteny with model species.

    Directory of Open Access Journals (Sweden)

    Rebekah E Oliver

    Full Text Available A physically anchored consensus map is foundational to modern genomics research; however, construction of such a map in oat (Avena sativa L., 2n = 6x = 42 has been hindered by the size and complexity of the genome, the scarcity of robust molecular markers, and the lack of aneuploid stocks. Resources developed in this study include a modified SNP discovery method for complex genomes, a diverse set of oat SNP markers, and a novel chromosome-deficient SNP anchoring strategy. These resources were applied to build the first complete, physically-anchored consensus map of hexaploid oat. Approximately 11,000 high-confidence in silico SNPs were discovered based on nine million inter-varietal sequence reads of genomic and cDNA origin. GoldenGate genotyping of 3,072 SNP assays yielded 1,311 robust markers, of which 985 were mapped in 390 recombinant-inbred lines from six bi-parental mapping populations ranging in size from 49 to 97 progeny. The consensus map included 985 SNPs and 68 previously-published markers, resolving 21 linkage groups with a total map distance of 1,838.8 cM. Consensus linkage groups were assigned to 21 chromosomes using SNP deletion analysis of chromosome-deficient monosomic hybrid stocks. Alignments with sequenced genomes of rice and Brachypodium provide evidence for extensive conservation of genomic regions, and renewed encouragement for orthology-based genomic discovery in this important hexaploid species. These results also provide a framework for high-resolution genetic analysis in oat, and a model for marker development and map construction in other species with complex genomes and limited resources.

  13. Post-installed concrete anchors in nuclear power plants: Performance and qualification

    International Nuclear Information System (INIS)

    Mahrenholtz, Philipp; Eligehausen, Rolf

    2015-01-01

    Graphical abstract: - Highlights: • Review of qualification and design regulations for anchors in nuclear power plants. • First complete set of nuclear anchor load–displacement data and its evaluation ever. • Demonstration of robust test behavior of a qualified post-installed anchor product. - Abstract: In nuclear power plants (NPPs), post-installed anchors are widely used for structural and non-structural connections to concrete. In many countries, anchor products employed for safety relevant applications have to be approved by the authorities. For the high safety standards in force for NPPs, special requirements have to be met to allow for extreme design situations. This paper presents an experimental test program conducted to evaluate the performance of anchors according to the German Guideline for Anchorages in Nuclear Power Plants and Nuclear Technology Installations (DIBt KKW Leitfaden, 2010). After a brief introduction to anchor behavior and the regulative context, the results of tension and shear tests carried out on undercut anchors are discussed. Robust load capacities and relatively small displacements determined for demanding load and crack cycling tests demonstrated the suitability of anchors qualified according to a state-of-the-art qualification guideline

  14. Reinforcing mechanism of anchors in slopes: a numerical comparison of results of LEM and FEM

    Science.gov (United States)

    Cai, Fei; Ugai, Keizo

    2003-06-01

    This paper reports the limitation of the conventional Bishop's simplified method to calculate the safety factor of slopes stabilized with anchors, and proposes a new approach to considering the reinforcing effect of anchors on the safety factor. The reinforcing effect of anchors can be explained using an additional shearing resistance on the slip surface. A three-dimensional shear strength reduction finite element method (SSRFEM), where soil-anchor interactions were simulated by three-dimensional zero-thickness elasto-plastic interface elements, was used to calculate the safety factor of slopes stabilized with anchors to verify the reinforcing mechanism of anchors. The results of SSRFEM were compared with those of the conventional and proposed approaches for Bishop's simplified method for various orientations, positions, and spacings of anchors, and shear strengths of soil-grouted body interfaces. For the safety factor, the proposed approach compared better with SSRFEM than the conventional approach. The additional shearing resistance can explain the influence of the orientation, position, and spacing of anchors, and the shear strength of soil-grouted body interfaces on the safety factor of slopes stabilized with anchors.

  15. The anchors of steel wire ropes, testing methods and their results

    Directory of Open Access Journals (Sweden)

    J. Krešák

    2012-10-01

    Full Text Available The present paper introduces an application of the acoustic and thermographic method in the defectoscopic testing of immobile steel wire ropes at the most critical point, the anchor. First measurements and their results by these new defectoscopic methods are shown. In defectoscopic tests at the anchor, the widely used magnetic method gives unreliable results, and therefore presents a problem for steel wire defectoscopy. Application of the two new methods in the steel wire defectoscopy at the anchor point will enable increased safety measures at the anchor of steel wire ropes in bridge, roof, tower and aerial cable lift constructions.

  16. Use of sulfur concrete for radioecological problems solution in Kazakhstan

    International Nuclear Information System (INIS)

    Takibaev, Zh.; Belyashov, D.; Vagin, S.

    2001-01-01

    At present during intensive development of oil and gas fields in Kazakhstan a lot amount of sulfur is extracting. The problem of sulfur utilization demands its immediate solution. One of the perspective trends of sulfur utilization is use it in production of sulfur polymer concrete. It is well known, that encapsulation of low level radioactive and toxic wastes in sulfur polymer concrete and design from it radiation protection facilities have good perspectives for solution of radioecological problems. Sulfur concrete has high corrosion and radiation stability, improved mechanical and chemical properties. Unique properties of sulfur concrete allow to use it in materials ensuring protection from external irradiation

  17. Cognitive Advantages of Blending with Material Anchors in Energy Instruction

    Science.gov (United States)

    Close, Hunter; Close, Eleanor; Scherr, Rachel; McKagan, Sarah

    2012-03-01

    Conceptual blending theory [1] explains how the human imagination creates unreal situations that help us think about reality. In these imaginary blended situations, we establish new correspondences, interactions, and dynamics, and the outcomes of the dynamics lend insight to the nature of various real situations that were used to compose the blend. Blends are not just in the head, however; in some cases, a material system participates in the blend by lending its material structure as conceptual structure [2]. In the instructional activity Energy Theater [3], people represent units of energy and move around in order to solve puzzles of energy transfer and transformation. We use the ideas of blending and material anchors to understand how learners are able to use the representation to their cognitive advantage. [4pt] [1] Fauconnier, G. & Turner, M. (2002). The Way We Think: Conceptual Blending and the Mind's Hidden Complexities. New York: Basic Books.[0pt] [2] Hutchins, E. (2005) Material anchors for conceptual blends. Journal of Pragmatics 37, 1555-1577.[0pt] [3] Scherr, R. E., Close, H. G., McKagan, S. B., & Close, E. W. (2010) ``Energy Theater'': Using the body symbolically to understand energy. In C. Singh, M. Sabella, & S. Rebello (Eds.) 2010 PERC Proceedings. Melville, NY: AIP Press.

  18. Anchored Clathrate Waters Bind Antifreeze Proteins to Ice

    Energy Technology Data Exchange (ETDEWEB)

    C Garnham; R Campbell; P Davies

    2011-12-31

    The mechanism by which antifreeze proteins (AFPs) irreversibly bind to ice has not yet been resolved. The ice-binding site of an AFP is relatively hydrophobic, but also contains many potential hydrogen bond donors/acceptors. The extent to which hydrogen bonding and the hydrophobic effect contribute to ice binding has been debated for over 30 years. Here we have elucidated the ice-binding mechanism through solving the first crystal structure of an Antarctic bacterial AFP. This 34-kDa domain, the largest AFP structure determined to date, folds as a Ca{sup 2+}-bound parallel beta-helix with an extensive array of ice-like surface waters that are anchored via hydrogen bonds directly to the polypeptide backbone and adjacent side chains. These bound waters make an excellent three-dimensional match to both the primary prism and basal planes of ice and in effect provide an extensive X-ray crystallographic picture of the AFP{vert_ellipsis}ice interaction. This unobstructed view, free from crystal-packing artefacts, shows the contributions of both the hydrophobic effect and hydrogen bonding during AFP adsorption to ice. We term this mode of binding the 'anchored clathrate' mechanism of AFP action.

  19. Anchored PKA as a gatekeeper for gap junctions.

    Science.gov (United States)

    Pidoux, Guillaume; Taskén, Kjetil

    2015-01-01

    Anchored protein kinase A (PKA) bound to A Kinase Anchoring Protein (AKAP) mediates effects of localized increases in cAMP in defined subcellular microdomains and retains the specificity in cAMP-PKA signaling to distinct extracellular stimuli. Gap junctions are pores between adjacent cells constituted by connexin proteins that provide means of communication and transfer of small molecules. While the PKA signaling is known to promote human trophoblast cell fusion, the gap junction communication through connexin 43 (Cx43) is a prerequisite for this process. We recently demonstrated that trophoblast fusion is regulated by ezrin, a known AKAP, which binds to Cx43 and delivers PKA in the vicinity gap junctions. We found that disruption of the ezrin-Cx43 interaction abolished PKA-dependent phosphorylation of Cx43 as well as gap junction communication and subsequently cell fusion. We propose that the PKA-ezrin-Cx43 macromolecular complex regulating gap junction communication constitutes a general mechanism to control opening of Cx43 gap junctions by phosphorylation in response to cAMP signaling in various cell types.

  20. Environmental behavior and analysis of agricultural sulfur.

    Science.gov (United States)

    Griffith, Corey M; Woodrow, James E; Seiber, James N

    2015-11-01

    Sulfur has been widely used for centuries as a staple for pest and disease management in agriculture. Presently, it is the largest-volume pesticide in use worldwide. This review describes the sources and recovery methods for sulfur, its allotropic forms and properties and its agricultural uses, including development and potential advantages of nanosulfur as a fungicide. Chemical and microbial reactivity, interactions in soil and water and analytical methods for determination in environmental samples and foodstuffs, including inexpensive analytical methods for sulfur residues in wine, beer and other food/beverage substrates, will be reviewed. The toxicology of sulfur towards humans and agriculturally important fungi is included, with some restrictions on use to promote safety. The review concludes with areas for which more research is warranted. © 2015 Society of Chemical Industry.

  1. ROE Total Sulfur Deposition 1989-1991

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset identifies the amount of wet, dry, and total deposition of sulfur in kilograms per hectare from 1989 to 1991 at a set of point locations across the...

  2. ROE Total Sulfur Deposition 2011-2013

    Data.gov (United States)

    U.S. Environmental Protection Agency — This dataset identifies the amount of wet, dry, and total deposition of sulfur in kilograms per hectare from 2011 to 2013 at a set of point locations across the...

  3. Sulfur Mustard Damage to Cornea: Preventive Studies

    National Research Council Canada - National Science Library

    Varma, Shambhu

    2004-01-01

    .... A preventive effect has been observed at the level of tissue morphology. Studies are in progress at the level of cellular metabolism, Here, CEES has been used as a representative compound simulating the action of sulfur mustard (HD...

  4. Peatland Acidobacteria with a dissimilatory sulfur metabolism

    DEFF Research Database (Denmark)

    Hausmann, Bela; Pelikan, Claus; Herbold, Craig W

    2018-01-01

    Sulfur-cycling microorganisms impact organic matter decomposition in wetlands and consequently greenhouse gas emissions from these globally relevant environments. However, their identities and physiological properties are largely unknown. By applying a functional metagenomics approach to an acidic...

  5. Properties of sulfur-extended asphalt concrete

    Directory of Open Access Journals (Sweden)

    Gladkikh Vitaliy

    2016-01-01

    Full Text Available Currently, increased functional reliability of asphalt concrete coatings associated with various modifying additives that improve the durability of pavements. Promising builder is a technical sulfur. Asphalt concrete, made using a complex binder consisting of petroleum bitumen and technical sulfur, were calledsSulfur-Extended Asphalt Concrete. Such asphalt concrete, due to changes in the chemical composition of particulate and bitumen, changes the intensity of the interaction at the interface have increased rates of physical and mechanical properties. There was a lack of essential knowledge concerning mechanical properties of the sulfur-bituminous concrete with such an admixture; therefore, we had carried out the necessary examination. It is revealed that a new material satisfies local regulations in terms of compressive and tensile strength, shear resistance, and internal friction.

  6. Microporous Carbon Polyhedrons Encapsulated Polyacrylonitrile Nanofibers as Sulfur Immobilizer for Lithium-Sulfur Battery.

    Science.gov (United States)

    Zhang, Ye-Zheng; Wu, Zhen-Zhen; Pan, Gui-Ling; Liu, Sheng; Gao, Xue-Ping

    2017-04-12

    Microporous carbon polyhedrons (MCPs) are encapsulated into polyacrylonitrile (PAN) nanofibers by electrospinning the mixture of MCPs and PAN. Subsequently, the as-prepared MCPs-PAN nanofibers are employed as sulfur immobilizer for lithium-sulfur battery. Here, the S/MCPs-PAN multicomposites integrate the advantage of sulfur/microporous carbon and sulfurized PAN. Specifically, with large pore volume, MCPs inside PAN nanofibers provide a sufficient sulfur loading. While PAN-based nanofibers offer a conductive path and matrix. Therefore, the electrochemical performance is significantly improved for the S/MCPs-PAN multicomposite with a suitable sulfur content in carbonate-based electrolyte. At the current density of 160 mA g -1 sulfur , the S/MPCPs-PAN composite delivers a large discharge capacity of 789.7 mAh g -1 composite , high Coulombic efficiency of about 100% except in the first cycle, and good capacity retention after 200 cycles. In particular, even at 4 C rate, the S/MCPs-PAN composite can still release the discharge capacity of 370 mAh g -1 composite . On the contrary, the formation of the thick SEI layer on the surface of nanofibers with a high sulfur content are observed, which is responsible for the quick capacity deterioration of the sulfur-based composite in carbonate-based electrolyte. This design of the S/MCPs-PAN multicomposite is helpful for the fabrication of stable Li-S battery.

  7. Developing porous carbon with dihydrogen phosphate groups as sulfur host for high performance lithium sulfur batteries

    Science.gov (United States)

    Cui, Yanhui; Zhang, Qi; Wu, Junwei; Liang, Xiao; Baker, Andrew P.; Qu, Deyang; Zhang, Hui; Zhang, Huayu; Zhang, Xinhe

    2018-02-01

    Carbon matrix (CM) derived from biomass is low cost and easily mass produced, showing great potential as sulfur host for lithium sulfur batteries. In this paper we report on a dihydrogen phosphate modified CM (PCM-650) prepared from luffa sponge (luffa acutangula) by phosphoric acid treatment. The phosphoric acid not only increases the surface area of the PCM-650, but also introduces dihydrogen phosphate onto PCM-650 (2.28 at% P). Sulfur impregnated (63.6 wt%) PCM-650/S, in comparison with samples with less dihydrogen phosphate LPCM-650/S, shows a significant performance improvement. XPS analysis is conducted for sulfur at different stages, including sulfur (undischarged), polysulfides (discharge to 2.1 V) and short chain sulfides (discharge to 1.7 V). The results consistently show chemical shifts for S2p in PCM-650, suggesting an enhanced adsorption effect. Furthermore, density functional theory (DFT) calculations is used to clarify the molecular binding: carbon/sulfur (0.86 eV), carbon/Li2S (0.3 eV), CH3-O-PO3H2/sulfur (1.24 eV), and CH3-O-PO3H2/Li2S (1.81 eV). It shows that dihydrogen phosphate group can significantly enhance the binding with sulfur and sulfide, consistent with XPS results. Consequently a CM functionalised with dihydrogen phosphate shows great potential as the sulfur host in a Li-S battery.

  8. Studies on the mechanical behavior of rock anchors. ; Results of in-situ pull-out tests. Rock anchor no rikigaku kyodo ni kansuru kenkyu. ; Gen prime ichi shiken ni okeru anchor no kyodo

    Energy Technology Data Exchange (ETDEWEB)

    Arimoto, K.; Ebisu, S.; Nakagawa, M.; Usui, M.; Someya, T.; Machida, N. (Okumura Corp., Tokyo (Japan))

    1991-10-31

    The rock anchor method is planned to apply to some permanent structures but since this method was developed for temporary structures, the clarification of the transferring mechanism of force from an anchor to a rockmass, the fracture mechanism and the development of the dynamic model have not been established. This paper arranged the data obtained by a full-scale, in-situ pulling out test of a rock anchor as the first step to understand the dynamic behavior and analyzed by paying attetion to the modulus of deformation of the rockmass where the anchor was embedded to elucidate the affecting degree of rockmass modulus of deformation, the embedded length and the tendon diameter on the dynamic behavior of the anchor. The rock anchor behavior could be expressed accurately by applying a theoretical solution derived by the balancing condition of forces at the boundary face. Especially, when the rockmass is uniform and the fracture occurrs at the interface between the tendon and grout, this approach can express the fracture with the accuracy similar to that made by the finite element method. 6 refs., 11 figs.,1 tab.

  9. Polymer Electrolytes for Lithium/Sulfur Batteries

    Directory of Open Access Journals (Sweden)

    The Nam Long Doan

    2012-08-01

    Full Text Available This review evaluates the characteristics and advantages of employing polymer electrolytes in lithium/sulfur (Li/S batteries. The main highlights of this study constitute detailed information on the advanced developments for solid polymer electrolytes and gel polymer electrolytes, used in the lithium/sulfur battery. This includes an in-depth analysis conducted on the preparation and electrochemical characteristics of the Li/S batteries based on these polymer electrolytes.

  10. Sulfur Oxides Risk and Exposure Assessment Planning ...

    Science.gov (United States)

    In conducting risk/exposure assessments for the Sulfur Oxides NAAQS review, EPA will first develop a draft Scope and Methods Plan which will describe the proposed scope of the quantitative and qualitative analyses to be performed and the tools/methods that may be employed Provide opportunity for CASAC feedback on EPA's plans for the risk and exposure assessment for the Sulfur Oxides NAAQS review

  11. Plutonium oxides analysis. Sulfur potentiometric analysis

    International Nuclear Information System (INIS)

    Anon.

    Total sulfur determination (sulfur, sulfates, sulfides ...) in plutonium oxides, suitable for sulfate ion content between 0.003 percent to 0.2 percent, by dissolution in nitric hydrofluoric acid, nitrates elimination, addition of hydrochloric acid and reduction in hydrogen sulfide which is carried by an inert gas and neutralized by sodium hydroxide. Sodium sulfide is titrated with mercuric acetate by constant intensity potentiometry [fr

  12. Ocular Effects of Sulfur Mustard

    Directory of Open Access Journals (Sweden)

    Yunes Panahi

    2013-06-01

    Full Text Available Purpose: To review current knowledge about ocular effects of sulfur mustard (SM and the associated histopathologic findings and clinical manifestationsMethods: Literature review of medical articles (human and animal studies was accomplished using PubMed, Scopus and ISI databases. A total of 274 relevant articles in English were retrieved and reviewed thoroughly.Results: Eyes are the most sensitive organs to local toxic effects of mustard gas. Ocular injuries are mediated through different toxic mechanisms including: biochemical damages, biomolecular and gene expression modification, induction of immunologic and inflammatory reactions, disturbing ultrastructural architecture of the cornea, and long-lasting corneal denervation. The resulting ocular injuries can roughly be categorized into acute or chronic complications. Most of the patients recover from acute injuries, but a minority of victims will suffer from chronic ocular complications. Mustard gas keratopathy (MGK is a devastating late complication of SM intoxication that proceeds from limbal stem cell deficiency (LSCD.Conclusion: SM induces several different damaging changes in case of ocular exposure; hence leading to a broad spectrum of ocular manifestations in terms of severity, timing and form. Unfortunately, no effective strategy has been introduced yet to inhibit or restore these damaging changes.

  13. Geochemistry of sulfur isotopes in basaltic rocks

    International Nuclear Information System (INIS)

    Hubberten, H.W.; Puchelt, H.

    1980-01-01

    Sulfur isotope ratios in oceanic basalts from three different localities (Bermuda Triangle, East Pacific Rise, and Galapagos Spreading Centre and in terrestrial basalts from Saudi Arabia have been analyzed by mass spectroscopy. In order to recognize and to interpret, if possible, secondary isotopic changes of basalts, various sulfurous materials occurring together with basalts gypsum, deep thermal pyrites) have been investigated too. By mechanochemical sample preparation it was possible to determine various sulfur carriers separately. Sulfides occurring as droplets in basalts showed values of -0.4 to -0.8 0 / 00 in materials from Bermuda Triangle, Galapagos Spreading Centre, and Saudi Arabia. The values are in agreement with those suggested for primary sulfur in the earth mantle. The basalts of East Pacific Rise show a significant 34 S enrichment with a mean value of +3 0 / 00 , which may be caused by processes in the course of magmatic differentiation. Because of secondary effects sulfate sulfur, including secondary pyrite, varies considerably in its sulfur isotope ratio (delta values between -12 to +22 0 / 00 ). Samples without recognizable secondary effects have delta values of about +1.5 0 / 00 , which can be supposed for primary sulfates. Mechanically separated pyrites from deep thermal superimposed basalts show slightly negative 34 S values

  14. Microphysical simulations of sulfur burdens from stratospheric sulfur geoengineering

    Directory of Open Access Journals (Sweden)

    J. M. English

    2012-05-01

    Full Text Available Recent microphysical studies suggest that geoengineering by continuous stratospheric injection of SO2 gas may be limited by the growth of the aerosols. We study the efficacy of SO2, H2SO4 and aerosol injections on aerosol mass and optical depth using a three-dimensional general circulation model with sulfur chemistry and sectional aerosol microphysics (WACCM/CARMA. We find increasing injection rates of SO2 in a narrow band around the equator to have limited efficacy while broadening the injecting zone as well as injecting particles instead of SO2 gas increases the sulfate burden for a given injection rate, in agreement with previous work. We find that injecting H2SO4 gas instead of SO2 does not discernibly alter sulfate size or mass, in contrast with a previous study using a plume model with a microphysical model. However, the physics and chemistry in aircraft plumes, which are smaller than climate model grid cells, need to be more carefully considered. We also find significant perturbations to tropospheric aerosol for all injections studied, particularly in the upper troposphere and near the poles, where sulfate burden increases by up to 100 times. This enhanced burden could have implications for tropospheric radiative forcing and chemistry. These results highlight the need to mitigate greenhouse gas emissions rather than attempt to cool the planet through geoengineering, and to further study geoengineering before it can be seriously considered as a climate intervention option.

  15. A facile in situ sulfur deposition route to obtain carbon-wrapped sulfur composite cathodes for lithium–sulfur batteries

    International Nuclear Information System (INIS)

    Su Yusheng; Manthiram, Arumugam

    2012-01-01

    Highlights: ► Carbon-wrapped sulfur composite was obtained via an in situ sulfur deposition route. ► Sulfur–carbon composite suppresses the shuttle effect during charging. ► Sulfur–carbon composite shows enhanced cyclability and rate capability. ► Sulfur–carbon composite retains structural integrity and low impedance during cycling. - Abstract: An in situ sulfur deposition route has been developed for synthesizing sulfur–carbon composites as cathode materials for lithium–sulfur batteries. This facile synthesis method involves the precipitation of elemental sulfur at the interspaces between carbon nanoparticles in aqueous solution at room temperature. The product has been characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, charge–discharge measurements, and electrochemical impedance spectroscopy. The sulfur–carbon composite cathode with 75 wt.% active material thus obtained exhibits a remarkably high first discharge capacity of 1116 mAh g −1 with good cycle performance, maintaining 777 mAh g −1 after 50 cycles. The significantly improved electrochemical performance of the sulfur–carbon composite cathode is attributed to the carbon-wrapped sulfur network structure, which suppresses the loss of active material during charging/discharging and the migration of the polysulfide ions to the anode (i.e., shuttling effect). The integrity of the cathode structure during cycling is reflected in low impedance values observed after cycling. This facile in situ sulfur deposition route represents a low-cost approach to obtain high-performance sulfur–carbon composite cathodes for rechargeable Li–S batteries.

  16. C-Anchor for Strengthening the Connection between Adhesively Bonded Laminates and Concrete Substrates

    Directory of Open Access Journals (Sweden)

    Ghani Razaqpur

    2015-11-01

    Full Text Available A new carbon fiber reinforced polymer (CFRP anchor is developed and tested to delay debonding in reinforced concrete (RC beams externally strengthened with FRP laminate/sheet. The C-shape anchor is made from a commercially available CFRP grid. The anchors legs are 95 mm long while the spacing between the legs is adjustable, depending on FRP laminate and beam widths. Nine full scale RC beams, 3.0 m long, 250 mm wide and 400 mm deep, were strengthened with CFRP laminate/sheet, with and without the C-anchor. The main test parameters were the type and amount of FRP laminate and the presence/absence of the anchor. Test results showed that beams with the anchor had generally 5%–10% higher debonding and failure load, and they reached higher deflection at failure than the companion beams without anchors. Although complete separation of the FRP laminate from the concrete was not observed in any of the beams with anchors, there was noticeable slip at failure at one end of the laminate. A significant outcome of the study is that anchors are effective in limiting the extent of debonding along the laminate, thus contributing to the flexural stiffness of the beam by reducing the extent of cracking and limiting the crack width along the beam. Finally, the anchor allowed the FRP to reach or exceed its theoretically allowable strain computed based on the American Concrete Institute (ACI Committee 440 recommendation while in none of the beams without anchors, the FRP reached its theoretically allowable strain.

  17. Understanding the anchoring effect of Graphene, BN, C2N and C3N4 monolayers for lithium-polysulfides in Li-S batteries

    Science.gov (United States)

    Zheng, Yanping; Li, Huanhuan; Yuan, Haiyan; Fan, Honghong; Li, Wenliang; Zhang, Jingping

    2018-03-01

    Recently, Li-S batteries with a high theoretical specific energy have attracted significant attention. However, their practical application is still seriously hindered by the shuttling effect of lithium polysulfides (LiPSs) in the Li-S batteries system. Introducing anchoring materials into the cathode or separator, which can strongly attract LiPSs because of advisable binding energies, has been demonstrated as an effective strategy to alleviate the shuttling effect for achieving the excellent cycling performance of Li-S batteries. In this work, the complete mechanistic understanding of the interaction between non-metallic monolayer materials (N-MMLMs, including Graphene, BN, C2N and C3N4) and LiPSs is given in detail with the aid of density functional theory. The calculation results show that N-MMLM can combine the chemical interaction and the physical entrapment of sulfur species to suppress the shuttling effect. C3N4 and C2N are predicted to trap LiPSs via stronger interfacial interaction and alleviate the interactions between LiPSs and solvents as well as the consequent dissolution. The strong anchoring effect of C3N4/C2N comes from the bonding of Li-N/C-S and charge transfer. Further charge transfer study reveals that the C3N4/C2N can serve as an electrocatalyst, which effectively accelerates the kinetics of LiPSs redox reactions.

  18. Fragmentation of suddenly heated liquids

    International Nuclear Information System (INIS)

    Blink, J.A.

    1985-03-01

    Fragmentation of free liquids in Inertial Confinement Fusion reactors could determine the upper bound on reactor pulse rate. The x-ray ablated materials must cool and recondense to allow driver beam propagation. The increased surface area caused by fragmentation will enhance the cooling and condensation rates. Relaxation from the suddenly heated state will move a liquid into the negative pressure region under the liquid-vapor P-V dome. The lithium equation of state was used to demonstrate that neutron-induced vaporization uses only a minor fraction of the added heat, much less than would be required to drive the expansion. A 77% expansion of the lithium is required before the rapid vaporization process of spinodal decomposition could begin, and nucleation and growth are too slow to contribute to the expansion

  19. Fragmentering og korridorer i landskabet

    DEFF Research Database (Denmark)

    Hammershøj, M.; Madsen, A. B.

    , at fragmentering af habitater resulterer i en reduktion og isolering af mange plante- og dyrepopulationer. Det er desuden vist, at korridorer har en funktion som habitater, hvilket er medvirkende til, at et område med korridorer kan huse flere arter og individer end et tilsvarende område uden korridorer. Der......Rapporten indeholder en litteraturudredning, der er baseret på en bearbejdning af den tilgængelige nationale og internationale litteratur omhandlende fragmentering og korridorer på det botaniske og zoologiske område. I alt 1.063 titler ligger til grund for udredningen. Udredningen har vist...... mangler dog entydige beviser for, at korridorer kan være af afgørende betydning for rekolonisering af habitater, i hvilke en given art er forsvundet. Afslutningsvis gives en liste med forskningsbehov samt en række anbefalinger....

  20. Fragmentation of percolation cluster perimeters

    Science.gov (United States)

    Debierre, Jean-Marc; Bradley, R. Mark

    1996-05-01

    We introduce a model for the fragmentation of porous random solids under the action of an external agent. In our model, the solid is represented by a bond percolation cluster on the square lattice and bonds are removed only at the external perimeter (or `hull') of the cluster. This model is shown to be related to the self-avoiding walk on the Manhattan lattice and to the disconnection events at a diffusion front. These correspondences are used to predict the leading and the first correction-to-scaling exponents for several quantities defined for hull fragmentation. Our numerical results support these predictions. In addition, the algorithm used to construct the perimeters reveals itself to be a very efficient tool for detecting subtle correlations in the pseudo-random number generator used. We present a quantitative test of two generators which supports recent results reported in more systematic studies.

  1. Fragmented nature: consequences for biodiversity

    OpenAIRE

    Olff, Han; Ritchie, Mark E.

    2002-01-01

    We discuss how fragmentation of resources and habitat operate differently on species diversity across spatial scales, ranging from positive effects on local species coexistence to negative effect on intermediate spatial scales, to again positive effects on large spatial and temporal scales. Species with different size and mobility can be regulated by different processes at the same spatial scale, a principle that may contribute to diversity. Differences in species richness between local commu...

  2. Virtual reunification of papyrus fragments

    OpenAIRE

    Vannini, Lucia

    2015-01-01

    Many Greek and Latin papyri, originally belonging to only one book (be it in roll or codex form), are currently scattered among different libraries. While it is not possible to physically rejoin these fragments as they cannot be moved from their institutions, they may be virtually reunited thanks to the techniques of digitisation, image processing and electronic publishing. This paper focuses on some issues – emerged from the work of my MA dissertation – that virtual reunification of Greek an...

  3. Impingement syndrome of the shoulder following double row suture anchor technique for arthroscopic rotator cuff repair: a case report

    Directory of Open Access Journals (Sweden)

    Rambani Rohit

    2009-06-01

    Full Text Available Abstract Introduction Arthroscopic repair of the rotator cuff is a demanding surgery. Accurate placement of anchors is key to success. Case presentation A 38-year-old woman received arthroscopic repair of her rotator cuff using a double row suture anchor technique. Postoperatively, she developed impingement syndrome which resulted from vertical displacement of a suture anchor once the shoulder was mobilised. The anchor was removed eight weeks following initial surgery and the patient had an uneventful recovery. Conclusion Impingement syndrome following arthroscopic repair of the rotator cuffs using double row suture anchor has not been widely reported. This is the first such case where anchoring has resulted in impingement syndrome.

  4. Acidithiobacillus caldus sulfur oxidation model based on transcriptome analysis between the wild type and sulfur oxygenase reductase defective mutant.

    Directory of Open Access Journals (Sweden)

    Linxu Chen

    Full Text Available Acidithiobacillus caldus (A. caldus is widely used in bio-leaching. It gains energy and electrons from oxidation of elemental sulfur and reduced inorganic sulfur compounds (RISCs for carbon dioxide fixation and growth. Genomic analyses suggest that its sulfur oxidation system involves a truncated sulfur oxidation (Sox system (omitting SoxCD, non-Sox sulfur oxidation system similar to the sulfur oxidation in A. ferrooxidans, and sulfur oxygenase reductase (SOR. The complexity of the sulfur oxidation system of A. caldus generates a big obstacle on the research of its sulfur oxidation mechanism. However, the development of genetic manipulation method for A. caldus in recent years provides powerful tools for constructing genetic mutants to study the sulfur oxidation system.An A. caldus mutant lacking the sulfur oxygenase reductase gene (sor was created and its growth abilities were measured in media using elemental sulfur (S(0 and tetrathionate (K(2S(4O(6 as the substrates, respectively. Then, comparative transcriptome analysis (microarrays and real-time quantitative PCR of the wild type and the Δsor mutant in S(0 and K(2S(4O(6 media were employed to detect the differentially expressed genes involved in sulfur oxidation. SOR was concluded to oxidize the cytoplasmic elemental sulfur, but could not couple the sulfur oxidation with the electron transfer chain or substrate-level phosphorylation. Other elemental sulfur oxidation pathways including sulfur diooxygenase (SDO and heterodisulfide reductase (HDR, the truncated Sox pathway, and the S(4I pathway for hydrolysis of tetrathionate and oxidation of thiosulfate in A. caldus are proposed according to expression patterns of sulfur oxidation genes and growth abilities of the wild type and the mutant in different substrates media.An integrated sulfur oxidation model with various sulfur oxidation pathways of A. caldus is proposed and the features of this model are summarized.

  5. Acidithiobacillus caldus sulfur oxidation model based on transcriptome analysis between the wild type and sulfur oxygenase reductase defective mutant.

    Science.gov (United States)

    Chen, Linxu; Ren, Yilin; Lin, Jianqun; Liu, Xiangmei; Pang, Xin; Lin, Jianqiang

    2012-01-01

    Acidithiobacillus caldus (A. caldus) is widely used in bio-leaching. It gains energy and electrons from oxidation of elemental sulfur and reduced inorganic sulfur compounds (RISCs) for carbon dioxide fixation and growth. Genomic analyses suggest that its sulfur oxidation system involves a truncated sulfur oxidation (Sox) system (omitting SoxCD), non-Sox sulfur oxidation system similar to the sulfur oxidation in A. ferrooxidans, and sulfur oxygenase reductase (SOR). The complexity of the sulfur oxidation system of A. caldus generates a big obstacle on the research of its sulfur oxidation mechanism. However, the development of genetic manipulation method for A. caldus in recent years provides powerful tools for constructing genetic mutants to study the sulfur oxidation system. An A. caldus mutant lacking the sulfur oxygenase reductase gene (sor) was created and its growth abilities were measured in media using elemental sulfur (S(0)) and tetrathionate (K(2)S(4)O(6)) as the substrates, respectively. Then, comparative transcriptome analysis (microarrays and real-time quantitative PCR) of the wild type and the Δsor mutant in S(0) and K(2)S(4)O(6) media were employed to detect the differentially expressed genes involved in sulfur oxidation. SOR was concluded to oxidize the cytoplasmic elemental sulfur, but could not couple the sulfur oxidation with the electron transfer chain or substrate-level phosphorylation. Other elemental sulfur oxidation pathways including sulfur diooxygenase (SDO) and heterodisulfide reductase (HDR), the truncated Sox pathway, and the S(4)I pathway for hydrolysis of tetrathionate and oxidation of thiosulfate in A. caldus are proposed according to expression patterns of sulfur oxidation genes and growth abilities of the wild type and the mutant in different substrates media. An integrated sulfur oxidation model with various sulfur oxidation pathways of A. caldus is proposed and the features of this model are summarized.

  6. Fragmentation measurement using image processing

    Directory of Open Access Journals (Sweden)

    Farhang Sereshki

    2016-12-01

    Full Text Available In this research, first of all, the existing problems in fragmentation measurement are reviewed for the sake of its fast and reliable evaluation. Then, the available methods used for evaluation of blast results are mentioned. The produced errors especially in recognizing the rock fragments in computer-aided methods, and also, the importance of determination of their sizes in the image analysis methods are described. After reviewing the previous work done, an algorithm is proposed for the automated determination of rock particles’ boundary in the Matlab software. This method can determinate automatically the particles boundary in the minimum time. The results of proposed method are compared with those of Split Desktop and GoldSize software in two automated and manual states. Comparing the curves extracted from different methods reveals that the proposed approach is accurately applicable in measuring the size distribution of laboratory samples, while the manual determination of boundaries in the conventional software is very time-consuming, and the results of automated netting of fragments are very different with the real value due to the error in separation of the objects.

  7. Residual Fragments after Percutaneous Nephrolithotomy

    Directory of Open Access Journals (Sweden)

    Kaan Özdedeli

    2012-09-01

    Full Text Available Clinically insignificant residual fragments (CIRFs are described as asymptomatic, noninfectious and nonobstructive stone fragments (≤4 mm remaining in the urinary system after the last session of any intervention (ESWL, URS or PCNL for urinary stones. Their insignificance is questionable since CIRFs could eventually become significant, as their presence may result in recurrent stone growth and they may cause pain and infection due to urinary obstruction. They may become the source of persistent infections and a significant portion of the patients will have a stone-related event, requiring auxilliary interventions. CT seems to be the ultimate choice of assessment. Although there is no concensus about the timing, recent data suggests that it may be performed one month after the procedure. However, imaging can be done in the immediate postoperative period, if there are no tubes blurring the assessment. There is some evidence indicating that selective medical therapy may have an impact on decreasing stone formation rates. Retrograde intrarenal surgery, with its minimally invasive nature, seems to be the best way to deal with residual fragments.

  8. Fragmentation during primordial star formation

    Science.gov (United States)

    Dutta, Jayanta

    Understanding the physics of the very first stars in the universe, the so-called Population III (or Pop III) stars, is crucial in determining how the universe evolved into what we observe today. In the standard model of Pop III star formation, the baryonic matter, mainly atomic hydrogen, collapses gravitationally into small Dark Matter (DM) minihalos. However, so far there is little understanding on how the thermal, dynamical and chemical evolution of the primordial gas depend on the initial configuration of the minihalos (for example, rotation of the unstable clumps inside minihalos, turbulence, formation of molecular hydrogen and cosmic variance of the minihalos). We use the modified version of the Gadget-2 code, a three-dimensional smoothed particle hydrodynamics (SPH) simulations, to follow the evolution of the collapsing gas in both idealized as well as more realistic minihalos. Unlike some earlier cosmological calculations, the implementation of sink particles allows us to follow the evolution of the accretion disk that builds up in the centre of each minihalo and fragments. We find that the fragmentation behavior depends on the adopted choice of three-body H2 formation rate coefficient. The increasing cooling rate during rapid conversion of the atomic to molecular hydrogen is offset by the heating due to gas contraction. We propose that the H2 cooling, the heating due to H2 formation and compressional heating together set a density and temperature structure in the disk that favors fragmentation. We also find that the cloud's initial degree of rotation has a significant effect on the thermal and dynamical evolution of the collapsing gas. Clouds with higher rotation exhibit spiral-arm-like structures that become gravitationally unstable to fragmentation on several scales. These type of clouds tend to fragment more and have lower accretion rates compared to their slowly rotating counterparts. In addition, we find that the distribution of specific angular

  9. Capital cost: high and low sulfur coal plants-1200 MWe. [High sulfur coal

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-01

    This Commercial Electric Power Cost Study for 1200 MWe (Nominal) high and low sulfur coal plants consists of three volumes. The high sulfur coal plant is described in Volumes I and II, while Volume III describes the low sulfur coal plant. The design basis and cost estimate for the 1232 MWe high sulfur coal plant is presented in Volume I, and the drawings, equipment list and site description are contained in Volume II. The reference design includes a lime flue gas desulfurization system. A regenerative sulfur dioxide removal system using magnesium oxide is also presented as an alternate in Section 7 Volume II. The design basis, drawings and summary cost estimate for a 1243 MWe low sulfur coal plant are presented in Volume III. This information was developed by redesigning the high sulfur coal plant for burning low sulfur sub-bituminous coal. These coal plants utilize a mechanical draft (wet) cooling tower system for condenser heat removal. Costs of alternate cooling systems are provided in Report No. 7 in this series of studies of costs of commercial electrical power plants.

  10. Genomic Insights into the Sulfur Metabolism of Phototrophic Green Sulfur Bacteria

    DEFF Research Database (Denmark)

    Frigaard, Niels-Ulrik; Bryant, Donald A.

    2008-01-01

    Green sulfur bacteria (GSB) utilize various combinations of sulfide, elemental sulfur, thiosulfate, ferrous iron, and hydrogen for anaerobic photoautotrophic growth. Genome sequence data is currently available for 12 strains of GSB. We present here a genome-based survey of the distribution...

  11. Infiltrating sulfur into a highly porous carbon sphere as cathode material for lithium–sulfur batteries

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Xiaohui; Kim, Dul-Sun [Department of Chemical and Biological Engineering and Research Institute for Green Energy Convergence Technology, Gyeongsang National University, 900 Gajwa-dong, Jinju 660-701 (Korea, Republic of); Ahn, Hyo-Jun; Kim, Ki-Won [Department of Materials Engineering and Convergence Technology, Gyeongsang National University, 900 Gajwa-dong, Jinju 660-701 (Korea, Republic of); Cho, Kwon-Koo, E-mail: kkcho66@gnu.ac.kr [Department of Materials Engineering and Convergence Technology, Gyeongsang National University, 900 Gajwa-dong, Jinju 660-701 (Korea, Republic of); Ahn, Jou-Hyeon, E-mail: jhahn@gnu.ac.kr [Department of Chemical and Biological Engineering and Research Institute for Green Energy Convergence Technology, Gyeongsang National University, 900 Gajwa-dong, Jinju 660-701 (Korea, Republic of); Department of Materials Engineering and Convergence Technology, Gyeongsang National University, 900 Gajwa-dong, Jinju 660-701 (Korea, Republic of)

    2014-10-15

    Highlights: • A highly porous carbon (HPC) with regular spherical morphology was synthesized. • Sulfur/HPC composites were prepared by melt–diffusion method. • Sulfur/HPC composites showed improved cyclablity and long-term cycle life. - Abstract: Sulfur composite material with a highly porous carbon sphere as the conducting container was prepared. The highly porous carbon sphere was easily synthesized with resorcinol–formaldehyde precursor as the carbon source. The morphology of the carbon was observed with field emission scanning electron microscope and transmission electron microscope, which showed a well-defined spherical shape. Brunauer–Emmett–Teller analysis indicated that it possesses a high specific surface area of 1563 m{sup 2} g{sup −1} and a total pore volume of 2.66 cm{sup 3} g{sup −1} with a bimodal pore size distribution, which allow high sulfur loading and easy transportation of lithium ions. Sulfur carbon composites with varied sulfur contents were prepared by melt–diffusion method and lithium sulfur cells with the sulfur composites showed improved cyclablity and long-term cycle life.

  12. Functional Groups and Sulfur K-Edge XANES Spectra : Divalent Sulfur and Disulfides

    NARCIS (Netherlands)

    Mijovilovich, A.E.; Pettersson, Lars G. M.; de Groot, Frank M. F.; Weckhuysen, Bert M.

    2010-01-01

    Sulfur K-edge XANES was measured for two divalent sulfurs (dibenzyl and benzyl phenyl) and two disulfides (dibenzyl and diphenyl). The absorption spectra could be assigned using density functional theory with the "half core hole" approximation for the core hole including relaxation of selected

  13. Quantification of Discrete Oxide and Sulfur Layers on Sulfur-Passivated InAs by XPS

    National Research Council Canada - National Science Library

    Petrovykh, D. Y; Sullivan, J. M; Whitman, L. J

    2005-01-01

    .... The S-passivated InAs(001) surface can be modeled as a sulfur-indium-arsenic layer-cake structure, such that characterization requires quantification of both arsenic oxide and sulfur layers that are at most a few monolayers thick...

  14. Stone anchors from Sindhudurg Fort on the west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Tripati, S.; Gaur, A.S.

    , of which there are triangular and three grapnet-type, used to construct the jetty along with the locally available sand stone. The two remaining grapnet-type anchors are erected on the jetty for mooring purposes. It is found that none of the anchors were...

  15. 48 CFR 252.225-7019 - Restriction on acquisition of anchor and mooring chain.

    Science.gov (United States)

    2010-10-01

    ... of anchor and mooring chain. 252.225-7019 Section 252.225-7019 Federal Acquisition Regulations System... and mooring chain. As prescribed in 225.7007-3, use the following clause: Restriction on Acquisition of Anchor and Mooring Chain (DEC 2009)) (a) Definition. “Component,” as used in this clause, means an...

  16. Arsonic acid as a robust anchor group for the surface modification of Fe3O4.

    Science.gov (United States)

    Ahn, Jihoon; Moon, Doo-Sik; Lee, Jin-Kyu

    2013-12-03

    In order to use iron oxide nanoparticles (Fe3O4) in various applications, a surface modification that provides colloidal stability and additional functionality to the nanoparticles is necessary. For the modification of the nanoparticle surface with ligand molecules, the ligand molecule should contain an anchor group that has a strong affinity for the surface. However, currently used anchor groups have shown some problems such as low affinity and stability as well as reactivity with the surface. In this study, arsonic acid (RAsO(OH)2) was investigated as a novel anchor group. It was possible to introduce azide groups on the surface of iron oxide nanoparticles using 4-azidophenylarsonic acid, and the desired functional molecules could be chemically attached to the surface via copper-catalyzed azide-alkyne cycloaddition (click chemistry). By quantifying and comparing the amount of attached anchors on the surface, it was found that arsonic acid displays better affinity than other currently used anchors (catechol, carboxylic acid). Furthermore, we examined the binding reversibility, long-term anchoring stability, and anchoring stability at various pH values. It was revealed that arsonic acid is a stable anchor in various conditions.

  17. The affordance of anchored discussion for the collaborative processing of academic texts.

    NARCIS (Netherlands)

    van der Pol, Jakko; Admiraal, W.|info:eu-repo/dai/nl/120226340; Simons, P.R.J.|info:eu-repo/dai/nl/068032994

    2006-01-01

    A system for ‘anchored discussion’ is compared with a system for traditional forum discussion (Blackboard), and their affordances for the collaborative processing of academic texts are investigated. Results show that discussion in the system for anchored discussion is directed at a processing of the

  18. A group of 20 stone anchors from the waters of Dwarka, on the Gujarat Coast, India

    Digital Repository Service at National Institute of Oceanography (India)

    Gaur, A.S.; Sundaresh; Tripati, S.; Gudigar, P.; Vora, K.H.; Bandodkar, S.N.

    suggesting an anchorage. Twenty stone anchors of three types located in a submerged channel on the southern side of the site. The grapnel type of anchor is associated with Indo-Arab trade between the 8th and 16th centuries AD. The triangular or composite...

  19. Management of subluxated capsular bag-fixated intraocular lenses using a capsular anchor.

    Science.gov (United States)

    Ton, Yokrat; Naftali, Modi; Gortzak, Ruth Lapid; Assia, Ehud I

    2016-05-01

    We describe the use of the capsular anchor (AssiAnchor) to manage a subluxated intraocular lens (IOL) in the capsular bag. The anchor comprises 2 prongs that hold the anterior lens capsule and a central rod that is sutured to the scleral wall, enabling centration of the IOL-capsular bag complex. Six pseudophakic patients presenting with subluxated posterior chamber IOLs in the capsular bag were operated on using the device. The anchor was used successfully in all cases, although in 2 cases only 1 prong was placed under the capsulorhexis edge. In 1 eye, 2 anchors were used 1 month apart following repeated traumatic zonular injury. The capsular bag holding the IOL remained centered and stable throughout the follow-up period. The anchoring device, which was originally designed to preserve the lens capsule and stabilize subluxated crystalline lenses, can also be used to treat subluxation of a capsular bag-fixated IOL. Dr. Assia is the inventor of the AssiAnchor, has a licensed patent of the anchor, and is consultant to Hanita Lenses. Dr. Lapid-Gortzak is a consultant to and speaker for Alcon Surgical, Inc., Hanita Lenses, Orca Surgical, and Sanoculis Ltd.; a speaker for Santen; and a consultant to Icon. Drs. Ton and Naftali have no financial or proprietary interest in any material or method mentioned. Copyright © 2016 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

  20. Model test of anchoring effect on zonal disintegration in deep surrounding rock masses.

    Science.gov (United States)

    Chen, Xu-Guang; Zhang, Qiang-Yong; Wang, Yuan; Liu, De-Jun; Zhang, Ning

    2013-01-01

    The deep rock masses show a different mechanical behavior compared with the shallow rock masses. They are classified into alternating fractured and intact zones during the excavation, which is known as zonal disintegration. Such phenomenon is a great disaster and will induce the different excavation and anchoring methodology. In this study, a 3D geomechanics model test was conducted to research the anchoring effect of zonal disintegration. The model was constructed with anchoring in a half and nonanchoring in the other half, to compare with each other. The optical extensometer and optical sensor were adopted to measure the displacement and strain changing law in the model test. The displacement laws of the deep surrounding rocks were obtained and found to be nonmonotonic versus the distance to the periphery. Zonal disintegration occurs in the area without anchoring and did not occur in the model under anchoring condition. By contrasting the phenomenon, the anchor effect of restraining zonal disintegration was revealed. And the formation condition of zonal disintegration was decided. In the procedure of tunnel excavation, the anchor strain was found to be alternation in tension and compression. It indicates that anchor will show the nonmonotonic law during suppressing the zonal disintegration.

  1. Model Test of Anchoring Effect on Zonal Disintegration in Deep Surrounding Rock Masses

    Directory of Open Access Journals (Sweden)

    Xu-Guang Chen

    2013-01-01

    Full Text Available The deep rock masses show a different mechanical behavior compared with the shallow rock masses. They are classified into alternating fractured and intact zones during the excavation, which is known as zonal disintegration. Such phenomenon is a great disaster and will induce the different excavation and anchoring methodology. In this study, a 3D geomechanics model test was conducted to research the anchoring effect of zonal disintegration. The model was constructed with anchoring in a half and nonanchoring in the other half, to compare with each other. The optical extensometer and optical sensor were adopted to measure the displacement and strain changing law in the model test. The displacement laws of the deep surrounding rocks were obtained and found to be nonmonotonic versus the distance to the periphery. Zonal disintegration occurs in the area without anchoring and did not occur in the model under anchoring condition. By contrasting the phenomenon, the anchor effect of restraining zonal disintegration was revealed. And the formation condition of zonal disintegration was decided. In the procedure of tunnel excavation, the anchor strain was found to be alternation in tension and compression. It indicates that anchor will show the nonmonotonic law during suppressing the zonal disintegration.

  2. Unlocking Hospitality Managers Career Transitions through Applying Schein's Career Anchors Theory

    Science.gov (United States)

    McGuire, David; Polla, Giovana; Heidl, Britta

    2017-01-01

    Purpose: This paper seeks to unlock the career transitions of hospitality managers through applying Schein's career anchors theory. It seeks to understand how Schein's Career Anchors help explain the career transitions of managers in the Scottish hospitality industry. Design/methodology/approach: The paper adopts a non-sequential multi-method…

  3. Structural models of the membrane anchors of envelope glycoproteins E1 and E2 from pestiviruses

    International Nuclear Information System (INIS)

    Wang, Jimin; Li, Yue; Modis, Yorgo

    2014-01-01

    The membrane anchors of viral envelope proteins play essential roles in cell entry. Recent crystal structures of the ectodomain of envelope protein E2 from a pestivirus suggest that E2 belongs to a novel structural class of membrane fusion machinery. Based on geometric constraints from the E2 structures, we generated atomic models of the E1 and E2 membrane anchors using computational approaches. The E1 anchor contains two amphipathic perimembrane helices and one transmembrane helix; the E2 anchor contains a short helical hairpin stabilized in the membrane by an arginine residue, similar to flaviviruses. A pair of histidine residues in the E2 ectodomain may participate in pH sensing. The proposed atomic models point to Cys987 in E2 as the site of disulfide bond linkage with E1 to form E1–E2 heterodimers. The membrane anchor models provide structural constraints for the disulfide bonding pattern and overall backbone conformation of the E1 ectodomain. - Highlights: • Structures of pestivirus E2 proteins impose constraints on E1, E2 membrane anchors. • Atomic models of the E1 and E2 membrane anchors were generated in silico. • A “snorkeling” arginine completes the short helical hairpin in the E2 membrane anchor. • Roles in pH sensing and E1–E2 disulfide bond formation are proposed for E1 residues. • Implications for E1 ectodomain structure and disulfide bonding pattern are discussed

  4. Structural models of the membrane anchors of envelope glycoproteins E1 and E2 from pestiviruses

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jimin, E-mail: jimin.wang@yale.edu; Li, Yue; Modis, Yorgo, E-mail: yorgo.modis@yale.edu

    2014-04-15

    The membrane anchors of viral envelope proteins play essential roles in cell entry. Recent crystal structures of the ectodomain of envelope protein E2 from a pestivirus suggest that E2 belongs to a novel structural class of membrane fusion machinery. Based on geometric constraints from the E2 structures, we generated atomic models of the E1 and E2 membrane anchors using computational approaches. The E1 anchor contains two amphipathic perimembrane helices and one transmembrane helix; the E2 anchor contains a short helical hairpin stabilized in the membrane by an arginine residue, similar to flaviviruses. A pair of histidine residues in the E2 ectodomain may participate in pH sensing. The proposed atomic models point to Cys987 in E2 as the site of disulfide bond linkage with E1 to form E1–E2 heterodimers. The membrane anchor models provide structural constraints for the disulfide bonding pattern and overall backbone conformation of the E1 ectodomain. - Highlights: • Structures of pestivirus E2 proteins impose constraints on E1, E2 membrane anchors. • Atomic models of the E1 and E2 membrane anchors were generated in silico. • A “snorkeling” arginine completes the short helical hairpin in the E2 membrane anchor. • Roles in pH sensing and E1–E2 disulfide bond formation are proposed for E1 residues. • Implications for E1 ectodomain structure and disulfide bonding pattern are discussed.

  5. Identification of amplified fragment length polymorphism (AFLP ...

    African Journals Online (AJOL)

    Identification of amplified fragment length polymorphism (AFLP) fragments linked to soybean mosaic virus resistance gene in Glycine soja and conversion to a sequence characterized amplified regions (SCAR) marker for rapid selection.

  6. Anchoring FRP Composite Armor in Flexible Offshore Riser Systems

    DEFF Research Database (Denmark)

    Costache, Andrei

    of composite materials. One of the problems related to the substitution of tensile steel members is that anchoring in the metallic end fittings of the pipe is very challenging.The purpose of this thesis is to ensure the transfer of tensile loads between a unidirectional fiber reinforced polymer and a metallic...... element model was constructed for each of the experimental configurations. Initial effort is used to understand the behavior of the grip and obtain good accuracy with the finite element model. Experimental data is used as input. The model makes it possible to visualize the piece-wise onset of movement...... of the grip system. Analysis of the boundary conditions show that several technical solutions can be chosen,without sacrificing performance. It is possible to create grips to fit a wide variety of constructive solutions....

  7. Smos Land Product Validation Activities at the Valencia Anchor Station

    Science.gov (United States)

    Lopez-Baeza, Ernesto

    ABSTRACT Soil moisture is a key parameter controlling the exchanges between the land surface and the atmosphere. In spite of being important for weather and climate modeling, this parameter is not well observed at a global scale. The SMOS (Soil Moisture and Ocean Salinity) Mission was designed by the European Space Agency (ESA) to measure soil moisture over continental surfaces as well as surface salinity over the oceans. Since 2001, the Valencia Anchor Station is currently being prepared for the validation of SMOS land products, namely soil moisture content and vegetation water content. The site has recently been selected by the Mission as a core validation site, mainly due to the reasonable homogeneous characteristics of the area which make it appropriate to undertake the validation of SMOS Level 2 land products during the Mission Commissioning Phase, before attempting more complex areas. Close to SMOS launch, ESA has defined and designed a SMOS V alidation Rehearsal C ampaign P lan which purpose is to repeat the Commissioning Phase execution with all centers, all tools, all participants, all structures, all data available, assuming all tools and structures are ready and trying to produce as close as possible the post-launch conditions. The aim is to test the readiness, the ensemble coordination and the speed of operations, and to avoid as far as possible any unexpected deficiencies of the plan and procedure during the real C ommissioning P hase campaigns. For the rehearsal activity, a control area of 10 x 10 km2 has been chosen at the Valencia Anchor Station study area where a network of ground soil moisture measuring stations is being set up based on the definition of homogeneous physio-hydrological units, attending to climatic, soil type, lithology, geology, elevation, slope and vegetation cover conditions. These stations are linked via a wireless communication system to a master post accessible via internet. The ground soil moisture stations will also be used

  8. Associative self-anchoring interacts with obtainability of chosen objects

    Directory of Open Access Journals (Sweden)

    Dean eMobbs

    2016-01-01

    Full Text Available While there is evidence that implicit self-esteem transfers to chosen objects (associative self-anchoring, it is still unknown whether this phenomenon extends to explicit self-esteem. Moreover, whether the knowledge that these objects might belong to the self in the future or not affects the evaluation of these objects has yet to be tested. Here, we demonstrate that evaluations of chosen objects are further enhanced when they are obtainable as compared to when they are not in participants with high explicit self-esteem, whereas participants with low explicit self-esteem exhibit the opposite pattern. These findings extend previous results and shed new light on the role of self-esteem in altering preferences for chosen objects depending on their obtainability.

  9. Mechanical Characteristics Analysis of Surrounding Rock on Anchor Bar Reinforcement

    Science.gov (United States)

    Gu, Shuan-cheng; Zhou, Pan; Huang, Rong-bin

    2018-03-01

    Through the homogenization method, the composite of rock and anchor bar is considered as the equivalent material of continuous, homogeneous, isotropic and strength parameter enhancement, which is defined as reinforcement body. On the basis of elasticity, the composite and the reinforcement are analyzed, Based on strengthening theory of surrounding rock and displacement equivalent conditions, the expression of reinforcement body strength parameters and mechanical parameters is deduced. The example calculation shows that the theoretical results are close to the results of the Jia-mei Gao[9], however, closer to the results of FLAC3D numerical simulation, it is proved that the model and surrounding rock reinforcement body theory are reasonable. the model is easy to analyze and calculate, provides a new way for determining reasonable bolt support parameters, can also provides reference for the stability analysis of underground cavern bolting support.

  10. Chemotherapy for gastric cancer by finely tailoring anti-Her2 anchored dual targeting immunomicelles.

    Science.gov (United States)

    Li, Wei; Zhao, He; Qian, Weizhu; Li, Huafei; Zhang, Li; Ye, Zengwei; Zhang, Ge; Xia, Mao; Li, Jinfeng; Gao, Jie; Li, Bohua; Kou, Geng; Dai, Jianxin; Wang, Hao; Guo, Yajun

    2012-07-01

    Micelles with high in vivo serum stability and intratumor accumulation post intravenous (i.v.) injection are highly desired for promoting chemotherapy. Herein, we finely synthesized and tailored well-defined anti-Her2 antibody Fab fragment conjugated immunomicelles (FCIMs), which showed interesting dual targeting function. The thermosensitive poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide)(118) (PID(118)) shell with volume phase transition temperature (VPTT: 39 °C) and the anchored anti-Her2 Fab moiety contributed to the passive and active targeting, respectively. The doxorubicin (DOX) loading capacity of such FCIMs was successfully increased about 2 times by physically enhanced hydrophobicity of inner reservoir without structural deformation. The cellular uptake and intracellular accumulation of DOX by temperature regulated passive and antibody navigated active targeting was 4 times of Doxil. The cytotoxicity assay against Her2 overexpression gastric cancer cells (N87s) showed that the IC50 of the FCIMs was ≈ 9 times lower than that of Doxil under cooperatively targeting by Fab at T > VPTT. FCIMs showed high serum stability by increasing the corona PID(118) chain density (S(corona)/N(agg)). In vivo tissue distribution was evaluated in Balb/c nude mice bearing gastric cancer. As observed by the IVIS(®) imaging system, the intratumor accumulation of such finely tailored FCIMs system was obviously promoted 24 h post i.v. administration. Due to the high stability and super-targeting, the in vivo xenografted gastric tumor growth was significantly inhibited with relative tumor volume much smaller than ≈ 5 of the control. Consequently, such finely tailored FCIMs with anti-Her2 active and temperature regulated passive dual tumor-targeting function show high potent in chemotherapy. Copyright © 2012 Elsevier Ltd. All rights reserved.

  11. Phosphatidylinositol anchor of HeLa cell alkaline phosphatase

    International Nuclear Information System (INIS)

    Jemmerson, R.; Low, M.G.

    1987-01-01

    Alkaline phosphatase from cancer cells, HeLa TCRC-1, was biosynthetically labeled with either 3 H-fatty acids or [ 3 H]ethanolamine as analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and fluorography of immunoprecipitated material. Phosphatidylinositol-specific phospholipase C (PI-PLC) released a substantial proportion of the 3 H-fatty acid label from immunoaffinity-purified alkaline phosphatase but had no effect on the radioactivity of [ 3 H]ethanolamine-labeled material. PI-PLC also liberated catalytically active alkaline phosphatase from viable cells, and this could be selectively blocked by monoclonal antibodies to alkaline phosphatase. However, the alkaline phosphatase released from 3 H-fatty acid labeled cells by PI-PLC was not radioactive. By contrast, treatment with bromelain removed both the 3 H-fatty acid and the [ 3 H]ethanolamine label from purified alkaline phosphatase. Subtilisin was also able to remove the [ 3 H]ethanolamine label from the purified alkaline phosphatase. The 3 H radioactivity in alkaline phosphatase purified from [ 3 H]ethanolamine-labeled cells comigrated with authentic [ 3 H]ethanolamine by anion-exchange chromatography after acid hydrolysis. The data suggest that the 3 H-fatty acid and [ 3 H]ethanolamine are covalently attached to the carboxyl-terminal segment since bromelain and subtilisin both release alkaline phosphatase from the membrane by cleavage at that end of the polypeptide chain. The data are consistent with findings for other proteins recently shown to be anchored in the membrane through a glycosylphosphatidylinositol structure and indicate that a similar structure contributes to the membrane anchoring of alkaline phosphatase

  12. Baculovirus Surface Display Using Infuenza Neuraminidase (NA Transmembrane Anchor

    Directory of Open Access Journals (Sweden)

    Irisa Trianti

    2016-11-01

    Full Text Available Baculovirus surface display has been employed as an excellent tools for presentation of foreign peptides and proteins on virus surface with native conformation, functions and immunogenicity. A baculovirus major envelope protein, gp64, or a capsid protein, vp39 are generally used as fusion partners for displaying of polypeptides on the surface of virions. Alternatively, a membrane anchoring domain of vesicular stomatitis virus G protein (VSV-G can also be used. In this study, an influenza neuraminidase (NA was proposed as a new membrane anchor for the display of Angiotensin II (AngII, DRVYIHPFHL, peptides. The AngII peptides were inserted into NA by replacing NA amino acid number 60-67 with AngII, and then integrated into a baculovirus genome. A recombinant baculovirus expressing the NA fusion-AngII peptides was generated from infected insect cells. Those peptides were found to express and translocated on the membrane of the baculovirus infected insect cell (Sf9 cell as detected by immunocytochemistry using anti-AngII monoclonal antibody. Upon budding of the recombinant baculovirus progenies through the insect cells membrane, the recombinant NA-AngII peptides was acquired to envelopes of the new baculovirus progenies. The conformation of NA on baculovirus surface was not affected by the deletion, as the 55 kDa band of NA can be detected from Western Blotting analysis by specific anti-NA monoclonal antibody. In addition, the same protein was also found by anti-AngII antibody indicating that the AngII peptides had been successfully fused with the recombinant NA. Interestingly, electron microscopy analysis demonstrated that not only the recombinant baculovirus displaying AngII peptides were generated by infected insect cells, but also the NA virus-like-particle displaying AngII peptides.

  13. Polarization and alignment of nucleus fission fragments

    International Nuclear Information System (INIS)

    Barabanov, A.L.; Grechukhin, D.P.

    1987-01-01

    Correlation of fragment orientation with orientation axis of fissile nucleus and with n-vector f vector of fragment divergence is considered. Estimations of polarization and alignment of fission fragments of preliminarily oriented nuclei in correlation (with n-vector f recording) and integral (with n-vector f averaging) experiments were conducted. It is shown that high sensitivity of polarization and fragment alignment to the character of nucleus movement at the stage of descent from barrier to rupture point exists

  14. [Interceptive treatment of maxillary hypoplasia with the use of bone anchors. A review of the literature].

    Science.gov (United States)

    Vermeulen, F M J; De Clerck, H J; van Beek, H; Becking, A G

    2014-02-01

    A Class III malocclusion is mainly caused by a hypoplastic maxilla and therefore the treatment is principally aimed at stimulating the growth of the maxilla. Disadvantages of conventional treatment methods are that treatment effects are mainly dentoalveolar rather than skeletal and that there is often an increase in the height of the lowerface. Moreover, patients are not always cooperative about wearing extra-oral appliances. Because of these disadvantages, a new treatment approach has been developed which makes use of skeletal anchoring. In this new technique, called 'bone anchored maxillary protraction, bone anchors are placed on both sides of the maxilla and the mandibula, onto which Class III elastics are attached. The literature shows that good results have been achieved with this method. Disadvantages of this method are that the placement of the bone anchors requires a surgical procedure and that complications, like the loosening or breaking of the anchors, can occur.

  15. Functionalized Nanostructures: Redox-Active Porphyrin Anchors for Supramolecular DNA Assemblies

    KAUST Repository

    Börjesson, Karl

    2010-09-28

    We have synthesized and studied a supramolecular system comprising a 39-mer DNA with porphyrin-modified thymidine nucleosides anchored to the surface of large unilamellar vesicles (liposomes). Liposome porphyrin binding characteristics, such as orientation, strength, homogeneity, and binding site size, was determined, suggesting that the porphyrin is well suited as a photophysical and redox-active lipid anchor, in comparison to the inert cholesterol anchor commonly used today. Furthermore, the binding characteristics and hybridization capabilities were studied as a function of anchor size and number of anchoring points, properties that are of importance for our future plans to use the addressability of these redox-active nodes in larger DNA-based nanoconstructs. Electron transfer from photoexcited porphyrin to a lipophilic benzoquinone residing in the lipid membrane was characterized by steady-state and time-resolved fluorescence and verified by femtosecond transient absorption. © 2010 American Chemical Society.

  16. Development and validation of European guidelines for seismic qualification of post-installed anchors.

    Science.gov (United States)

    Mahrenholtz, Philipp; Wood, Richard L; Eligehausen, Rolf; Hutchinson, Tara C; Hoehler, Matthew S

    2017-10-01

    This paper presents the technical background for the seismic qualification procedures for post-installed anchors in the European Technical Approval Guideline (ETAG 001) seismic annex issued in 2013. We discuss requirements for a comprehensive guideline and reference supporting documentation. Numerical studies to generate new simulated seismic protocols for anchors are summarized with focus on their application to Europe. To reduce the time and cost of anchor product qualification testing while fulfilling the requirement of European building codes to assess two performance categories, we combine the results of our numerical studies to generate novel testing protocols that allow for the assessment of anchor behavior at multiple levels in a unified protocol. Validation tests demonstrate that the unified protocol results in anchor performance comparable with that achieved in multiple, single-performance-level tests.

  17. The detrimental consequences for seagrass of ineffective marine park management related to boat anchoring.

    Science.gov (United States)

    La Manna, G; Donno, Y; Sarà, G; Ceccherelli, G

    2015-01-15

    Posidonia oceanica (L.) Delile meadows are recognized as priority habitat for conservation by the EU Habitats Directive. The La Maddalena Archipelago National Park (Mediterranean Sea) P. oceanica meadow, the dominant coastal habitat of the area, is mostly threatened by boat anchoring. 12 years after the establishment of mooring fields and anchoring restrictions, a study was conducted to measure their effectiveness on the conservation of seagrass and the mitigation of anchoring damage. We found that: (i) the condition of P. oceanica was disturbed, both in the mooring fields and in control locations; (ii) mooring fields and anchoring restrictions did not show to be an efficient system for the protection of seagrass, in fact anchor scars increased after the tourist season; (iii) the mooring systems had an impact on the surrounding area of the meadow, probably due to their misuse. On the basis of these results, management recommendations for marine parks are proposed. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Influences of surface and flexoelectric polarization on the effective anchoring energy in nematic liquid crystal

    International Nuclear Information System (INIS)

    Guan Rong-Hua; Ye Wen-Jiang; Xing Hong-Yu

    2015-01-01

    The physical effects on surface and flexoelectric polarization in a weak anchoring nematic liquid crystal cell are investigated systematically. We derive the analytic expressions of two effective anchoring energies for lower and upper substrates respectively as well as their effective anchoring strengths and corresponding tilt angles of effective easy direction. All of these quantities are relevant to the magnitudes of both two polarizations and the applied voltage U. Based on these expressions, the variations of effective anchoring strength and the tilt angle with the applied voltage are calculated for the fixed values of two polarizations. For an original weak anchoring hybrid aligned nematic cell, it may be equivalent to a planar cell for a small value of U and has a threshold voltage. The variation of reduced threshold voltage with reduced surface polarization strength is also calculated. The role of surface polarization is important without the adsorptive ions considered. (paper)

  19. Self-assembled peptides for coating of active sulfur nanoparticles in lithium–sulfur battery

    Energy Technology Data Exchange (ETDEWEB)

    Jewel, Yead; Yoo, Kisoo; Liu, Jin; Dutta, Prashanta, E-mail: prashanta@wsu.edu [Washington State University, School of Mechanical and Materials Engineering (United States)

    2016-03-15

    Development of lithium–sulfur (Li–S) battery is hindered by poor cyclability due to the loss of sulfur, although Li–S battery can provide high energy density. Coating of sulfur nanoparticles can help maintain active sulfur in the cathode of Li–S battery, and hence increase the cyclability. Among myriad of coating materials, synthetic peptides are very attractive because of their spontaneous self-assembly as well as electrical conductive characteristics. In this study, we explored the use of various synthetic peptides as a coating material for sulfur nanoparticles. Atomistic simulations were carried out to identify optimal peptide structure and density for coating sulfur nanoparticles. Three different peptide models, poly-proline, poly(leucine–lysine) and poly-histidine, are selected for this study based on their peptide–peptide and peptide-sulfur interactions. Simulation results show that both poly-proline and poly(leucine–lysine) can form self-assembled coating on sulfur nanoparticles (2–20 nm) in pyrrolidinone, a commonly used solvent for cathode slurry. We also studied the structural integrity of these synthetic peptides in organic [dioxolane (DOL) and dimethoxyethane (DME)] electrolyte used in Li–S battery. Both peptides show stable structures in organic electrolyte (DOL/DME) used in Li–S battery. Furthermore, the dissolution of sulfur molecules in organic electrolyte is investigated in the absence and presence of these peptide coatings. It was found that only poly(leucine–lysine)-based peptide can most effectively suppress the sulfur loss in electrolyte, suggesting its potential applications in Li–S battery as a coating material.Graphical abstract.

  20. Scaling and four-quark fragmentation

    NARCIS (Netherlands)

    Scholten, O.; Bosveld, G. D.

    1991-01-01

    The conditions for a scaling behaviour from the fragmentation process leading to slow protons are discussed. The scaling referred to implies that the fragmentation functions depend on the light-cone momentum fraction only. It is shown that differences in the fragmentation functions for valence- and

  1. Quark fragmentation in e+e- collisions

    International Nuclear Information System (INIS)

    Oddone, P.

    1984-12-01

    This brief review of new results in quark and gluon fragmentation observed in e + e - collisions concentrates mostly on PEP results and, within PEP, mostly on TPC results. The new PETRA results have been reported at this conference by M. Davier. It is restricted to results on light quark fragmentation since the results on heavy quark fragmentation have been reported by J. Chapman

  2. Remarks about the hypothesis of limiting fragmentation

    International Nuclear Information System (INIS)

    Chou, T.T.; Yang, C.N.

    1987-01-01

    Remarks are made about the hypothesis of limiting fragmentation. In particular, the concept of favored and disfavored fragment distribution is introduced. Also, a sum rule is proved leading to a useful quantity called energy-fragmentation fraction. (author). 11 refs, 1 fig., 2 tabs

  3. Scaling and critical behaviour in nuclear fragmentation

    International Nuclear Information System (INIS)

    Campi, X.

    1990-09-01

    These notes review recent results on nuclear fragmentation. An analysis of experimental data from exclusive experiments is made in the framework of modern theories of fragmentation of finite size objects. We discuss the existence of a critical regime of fragmentation and the relevance of scaling and finite size scaling

  4. Self-organized criticality in fragmenting

    DEFF Research Database (Denmark)

    Oddershede, L.; Dimon, P.; Bohr, J.

    1993-01-01

    The measured mass distributions of fragments from 26 fractured objects of gypsum, soap, stearic paraffin, and potato show evidence of obeying scaling laws; this suggests the possibility of self-organized criticality in fragmenting. The probability of finding a fragment scales inversely to a power...

  5. Digestion of Bangka monazite with sulfuric acid

    International Nuclear Information System (INIS)

    Riesna Prassanti

    2012-01-01

    Technology of Bangka monazite processing with alkaline method has been mastered by PPGN BATAN with the product in the form of RE (Rare Earth) which is contain U < 2 ppm and Th 12 - 16 ppm. Hence, as comparator, the research of Bangka monazite processing with acid method using sulfuric acid has been done. The aim of this research is to obtain the optimal condition of Bangka monazite's digestion using sulfuric acid so that all elements contained in the monazite that are U, Th, RE, PO 4 dissolved as much as possible. The research parameter's arc monazite particle's size, sulfuric acid consumption (weight ratio of monazite ore : sulfuric acid), digestion temperature, digestion time and consumption of wash water. The results showed that the optimal conditions of digestion are 250+ 325 mesh of monazite particle's size, 1 : 2.5 of weight ratio of monazite ore: sulfuric acid, 190°C of digestion temperature, 3 hours of digestion time and 8 times of weight monazite's feed of wash water with the recovery of digested U = 99.90 %, Th = 99.44 %, RE = 98.64 % and PO 4 = 99.88 %. (author)

  6. Sulfur deactivation of fatty ester hydrogenolysis catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Brands, D.S.; U-A-Sai, G.; Poels, E.K.; Bliek, A. [Univ. of Amsterdam (Netherlands). Dept. of Chemical Engineering

    1999-08-15

    Trace organosulfur compounds present as natural impurities in oleochemical feedstocks may lead to activation of copper-containing catalysts applied for hydrogenolysis of esters toward fatty alcohols. In this paper, the sulfur deactivation of Cu/SiO{sub 2} and Cu/ZnO/SiO{sub 2} catalysts was studied in the liquid-phase hydrogenolysis of methyl palmitate. The rate of deactivation is fast and increases as a function of the sulfur-containing compound present: octadecanethiol {approx} dihexadecyl disulfide < benzyl isothiocyanate < methyl p-toluene sulfonate < dihexadecyl sulfide < dibenzothiophene. The rapid deactivation is caused by the fact that sulfur is quantitatively removed from the reaction mixture and because mainly surface sulfides are formed under hydrogenolysis conditions. The life time of a zinc-promoted catalyst is up to two times higher than that of the Cu/SiO{sub 2} catalyst, most likely due to zinc surface sulfide formation. The maximum sulfur coverage obtained after full catalyst deactivation with dibenzothiophene and dihexadecyl sulfide--the sulfur compounds that cause the fastest deactivation--may be as low as 0.07. This is due to the fact that decomposition of these compounds as well as the hydrogenolysis reaction itself proceeds on ensembles of copper atoms. Catalyst regeneration studies reveal that activity cannot be regained by reduction or combined oxidation/reduction treatments. XRD, TPR, and TPO results confirm that no distinct bulk copper or zinc sulfide or sulfate phases are present.

  7. Lithium-sulfur batteries: progress and prospects.

    Science.gov (United States)

    Manthiram, Arumugam; Chung, Sheng-Heng; Zu, Chenxi

    2015-03-25

    Development of advanced energy-storage systems for portable devices, electric vehicles, and grid storage must fulfill several requirements: low-cost, long life, acceptable safety, high energy, high power, and environmental benignity. With these requirements, lithium-sulfur (Li-S) batteries promise great potential to be the next-generation high-energy system. However, the practicality of Li-S technology is hindered by technical obstacles, such as short shelf and cycle life and low sulfur content/loading, arising from the shuttling of polysulfide intermediates between the cathode and anode and the poor electronic conductivity of S and the discharge product Li2 S. Much progress has been made during the past five years to circumvent these problems by employing sulfur-carbon or sulfur-polymer composite cathodes, novel cell configurations, and lithium-metal anode stabilization. This Progress Report highlights recent developments with special attention toward innovation in sulfur-encapsulation techniques, development of novel materials, and cell-component design. The scientific understanding and engineering concerns are discussed at the end in every developmental stage. The critical research directions needed and the remaining challenges to be addressed are summarized in the Conclusion. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Sulfuric acid in the Venus clouds.

    Science.gov (United States)

    Sill, G. T.

    1972-01-01

    The extremely dry nature of the Venus upper atmosphere appears to demand the presence of an efficient desiccating agent as the chief constituent of the clouds of Venus. On the basis of polarization measures it is to be expected that this substance is present as spherical droplets, 1 to 2 microns in diameter, with a refractive index n of 1.46 plus or minus 0.02 at 3500A in the observed region of the atmosphere, with T about equal to 235 K. This substance must have ultraviolet, visible, and infrared reflection properties not inconsistent with the observed spectrum of Venus. Sulfuric acid, of about 86% by weight composition, roughly fulfills the first of these properties. The visible and ultraviolet transmission features of a thin layer of elemental bromine and hydrobromic acid dissolved in sulfuric acid somewhat resemble the Venus spectrum, up to 14 microns. The chemical process postulated for forming sulfuric acid involves the oxidation of sulfur and its compounds to sulfuric acid through the agency of elemental bromine produced by the photolytic decomposition of hydrogen bromide.

  9. Quantitative determination of the lateral density and intermolecular correlation between proteins anchored on the membrane surfaces using grazing incidence small-angle X-ray scattering and grazing incidence X-ray fluorescence.

    Science.gov (United States)

    Abuillan, Wasim; Vorobiev, Alexei; Hartel, Andreas; Jones, Nicola G; Engstler, Markus; Tanaka, Motomu

    2012-11-28

    As a physical model of the surface of cells coated with densely packed, non-crystalline proteins coupled to lipid anchors, we functionalized the surface of phospholipid membranes by coupling of neutravidin to biotinylated lipid anchors. After the characterization of fine structures perpendicular to the plane of membrane using specular X-ray reflectivity, the same membrane was characterized by grazing incidence small angle X-ray scattering (GISAXS). Within the framework of distorted wave Born approximation and two-dimensional Percus-Yevick function, we can analyze the form and structure factors of the non-crystalline, membrane-anchored proteins for the first time. As a new experimental technique to quantify the surface density of proteins on the membrane surface, we utilized grazing incidence X-ray fluorescence (GIXF). Here, the mean intermolecular distance between proteins from the sulfur peak intensities can be calculated by applying Abelé's matrix formalism. The characteristic correlation distance between non-crystalline neutravidin obtained by the GISAXS analysis agrees well with the intermolecular distance calculated by GIXF, suggesting a large potential of the combination of GISAXS and GIXF in probing the lateral density and correlation of non-crystalline proteins displayed on the membrane surface.

  10. Experimental Study On Lateral Load Capacity of Bamboo RC Beam Column Joints Strengthened By Bamboo Mechanical Anchors

    Directory of Open Access Journals (Sweden)

    Sri Umniati B.

    2017-01-01

    Full Text Available In this paper, the prospective of bamboos which available abundantly especially in Indonesia as rebars and mechanical anchors are studied. And also the endurance of the bamboos mechanical anchors to withstand cyclic loading were observed. Nine classes of bamboos bar were evaluated: consist of 3 different anchors (0, 4 and 8 anchors and 3 different compressive strength (19.19 MPa, 29.61 MPa and 37.96 MPa means 3 × 3 parameters. The results show that the lateral load capacity increased significantly with the present of bamboo anchors specimens: 26.04 % for 4 anchors specimens (C2 and 25 % for the 8 anchors specimens (C3 compared to zero anchor specimens (C1. On the other hand, the compressive strength of concrete have no significant effects to the lateral load capacity. Overall it can be concluded that, bamboo can be used as mechanical anchorage to strengthen beam column joint.

  11. A study on carbothermal reduction of sulfur dioxide to elemental sulfur using oilsands fluid coke

    Energy Technology Data Exchange (ETDEWEB)

    Bejarano, C.A.; Jia, C.Q.; Chung, K.H. [University of Toronto, Toronto, ON (Canada). Dept. of Chemical Engineering and Applied Chemistry

    2001-02-15

    Experiments and reaction equilibrium calculations were carried out for the SO{sub 2} gas and oilsands fluid coke system. The goal was to develop a coke-based sulfur-producing flue gas desulfurization (SP-FGD) process that removes SO{sub 2} from flue gases and converts it into elemental sulfur. The conversion of SO{sub 2} to elemental sulfur proceeded efficiently at temperatures higher than 600{degree}C, and the sulfur yield reached a maximum ({lt} 95%) at about 700{degree}C. An increase of temperature beyond 700{degree}C enhanced the reduction of product elemental sulfur, resulting in the formation of reduced sulfur species (COS and CS{sub 2}), which lowered the sulfur yield at 900{degree}C to 90%. Although equilibrium calculations suggest that a lower temperature favors the conversion of SO{sub 2} as well as the yield of elemental sulfur, experiments showed no formation of elemental sulfur at 600{degree}C and below, likely due to hindered kinetics. Faster reduction of SO{sub 2} was observed at a higher temperature in the range of 700-1000{degree}C. A complete conversion of SO{sub 2} was achieved in about 8 s at 700{degree}C. Prolonging the product gas-coke contact, the yield of elemental sulfur decreased due to the formation of COS and CS{sub 2} while the SO{sub 2} conversion remained complete. Equilibrium calculations suggest that the ultimate yield of elemental sulfur maximizes at the C/SO{sub 2} ratio of 1, which represents the stoichiometry of SO{sub 2} + C {yields} CO{sub 2} + S. For the C/SO{sub 2} ratio {lt} 1, equilibrium calculations predict elemental sulfur and CO{sub 2} being major products, suggesting that SO{sub 2} + C {yields} CO{sub 2} + S is the predominant reaction if SO{sub 2} is in excess. Experiments revealed that elemental sulfur and CO{sub 2} were the only major products if the conversion of SO{sub 2} was incomplete, which is in agreement with the result of the equilibrium modeling. 18 refs., 12 figs.

  12. Anthropogenic sulfur dioxide emissions: 1850–2005

    Directory of Open Access Journals (Sweden)

    S. J. Smith

    2011-02-01

    Full Text Available Sulfur aerosols impact human health, ecosystems, agriculture, and global and regional climate. A new annual estimate of anthropogenic global and regional sulfur dioxide emissions has been constructed spanning the period 1850–2005 using a bottom-up mass balance method, calibrated to country-level inventory data. Global emissions peaked in the early 1970s and decreased until 2000, with an increase in recent years due to increased emissions in China, international shipping, and developing countries in general. An uncertainty analysis was conducted including both random and systemic uncertainties. The overall global uncertainty in sulfur dioxide emissions is relatively small, but regional uncertainties ranged up to 30%. The largest contributors to uncertainty at present are emissions from China and international shipping. Emissions were distributed on a 0.5° grid by sector for use in coordinated climate model experiments.

  13. Sodium sulfur batteries for space applications

    Science.gov (United States)

    Degruson, James A.

    1992-02-01

    In 1986, Eagle-Picher Industries was selected by the Air Force to develop sodium sulfur cells for satellite applications. Specifically, the development program was geared toward low earth orbit goals requiring high charge and/or discharge rates. A number of improvements have been made on the cell level and a transition to a complete space battery was initiated at Eagle-Picher. The results of six months of testing a 250 watt/hour sodium sulfur space battery look very promising. With over 1000 LEO cycles conducted on this first battery, the next generation battery is being designed. This next design will focus on achieving greater energy densities associated with the sodium sulfur chemistry.

  14. Sulfur isotope in nature. Determination of sulfur isotope ratios in coal and petroleum by mass spectrometry

    International Nuclear Information System (INIS)

    Derda, M.

    1999-01-01

    Elementary sulfur or in chemical compounds is one of the elements widespread in the earth's crust and biosphere. Its participation in earth's crust amounts to 0.26 % by weight. Measurement of isotope composition of natural samples can deliver many information about origin, creation and transformation ranges of rocks and minerals. Sulfur isotope ratio contained in minerals is variable and for this reason investigation of isotope sulfur composition can deliver useful information about the geochemistry of each component. Therefore in the investigated sample it is necessary to determine not only the content of sulfur but also the isotope composition of each component. Differentiation of contents of sulfur-34 in natural sulfur compounds can reach up to 110 per mile. So large divergences can be explained by a kinetic effect or by bacterial reduction of sulphates. In this report a wide review of the results of investigations of isotope sulfur compositions in coal and petroleum are presented as well as the methods for the preparation of samples for mass spectrometry analysis are proposed. (author)

  15. Effect of highly reactive sulfur species on sulfur reduction in cracking gasoline

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez-Beltran, Francisco; Quintana-Solorzano, Roberto; Sanchez-Valente, Jaime; Pedraza-Archila, Francisco [Instituto Mexicano del Petroleo, Eje Central L. Cardenas 152, 07730 Mexico, D.F. (Mexico); Figueras, Francois [Institut de Recherche sur la Catalyse, 2 Avenue A. Einstein, 69626 Villeurbane Cedex (France)

    2003-05-08

    Stringent regulations for engine fuels have stimulated R and D work for reducing sulfur in cracked naphtha in the recent years. In order to progress in this issue information on the effect of the chemistry of sulfur compounds under cracking conditions is needed. In this work, hexyl-2-thiol was spiked in a gasoil feed and the effect on sulfur in gasoline was studied with an equilibrium catalyst (Ecat) and a commercial gasoline sulfur reduction additive. Spiked feeds showed lower conversion. The hexyl-2-thiol mainly produced H{sub 2}S and exhibited a competitive reaction with sulfur compounds contained in gasoil. Higher amounts of sulfur-in-coke were produced with the Ecat-additive blend compared to Ecat thus indicating that the hexyl-2-thiol adsorbs stronger on the additive which can be due to its Lewis acid properties. While the additive moderates the detrimental effect of hexyl-2-thiol on the catalyst activity its activity for sulfur reduction in gasoline was constrained.

  16. Reframing landscape fragmentation's effects on ecosystem services.

    Science.gov (United States)

    Mitchell, Matthew G E; Suarez-Castro, Andrés F; Martinez-Harms, Maria; Maron, Martine; McAlpine, Clive; Gaston, Kevin J; Johansen, Kasper; Rhodes, Jonathan R

    2015-04-01

    Landscape structure and fragmentation have important effects on ecosystem services, with a common assumption being that fragmentation reduces service provision. This is based on fragmentation's expected effects on ecosystem service supply, but ignores how fragmentation influences the flow of services to people. Here we develop a new conceptual framework that explicitly considers the links between landscape fragmentation, the supply of services, and the flow of services to people. We argue that fragmentation's effects on ecosystem service flow can be positive or negative, and use our framework to construct testable hypotheses about the effects of fragmentation on final ecosystem service provision. Empirical efforts to apply and test this framework are critical to improving landscape management for multiple ecosystem services. Copyright © 2015 Elsevier Ltd. All rights reserved.

  17. The formation of planets by disc fragmentation

    Directory of Open Access Journals (Sweden)

    Stamatellos Dimitris

    2013-04-01

    Full Text Available I discuss the role that disc fragmentation plays in the formation of gas giant and terrestrial planets, and how this relates to the formation of brown dwarfs and low-mass stars, and ultimately to the process of star formation. Protostellar discs may fragment, if they are massive enough and can cool fast enough, but most of the objects that form by fragmentation are brown dwarfs. It may be possible that planets also form, if the mass growth of a proto-fragment is stopped (e.g. if this fragment is ejected from the disc, or suppressed and even reversed (e.g by tidal stripping. I will discuss if it is possible to distinguish whether a planet has formed by disc fragmentation or core accretion, and mention of a few examples of observed exoplanets that are suggestive of formation by disc fragmentation.

  18. Linking Composite Scores: Effects of Anchor Test Length and Content Representativeness. Research Report. ETS RR-16-36

    Science.gov (United States)

    Lin, Peng; Dorans, Neil; Weeks, Jonathan

    2016-01-01

    The nonequivalent groups with anchor test (NEAT) design is frequently used in test score equating or linking. One important assumption of the NEAT design is that the anchor test is a miniversion of the 2 tests to be equated/linked. When the content of the 2 tests is different, it is not possible for the anchor test to be adequately representative…

  19. Method of making a sodium sulfur battery

    Science.gov (United States)

    Elkins, Perry E.

    1981-01-01

    A method of making a portion of a sodium sulfur battery is disclosed. The battery portion made is a portion of the container which defines the volume for the cathodic reactant materials which are sulfur and sodium polysulfide materials. The container portion is defined by an outer metal casing with a graphite liner contained therein, the graphite liner having a coating on its internal diameter for sealing off the porosity thereof. The steel outer container and graphite pipe are united by a method which insures that at the operating temperature of the battery, relatively low electrical resistance exists between the two materials because they are in intimate contact with one another.

  20. Flexible sulfur wires (Flex-SWs)—A new versatile platform for lithium-sulfur batteries

    International Nuclear Information System (INIS)

    Hanumantha, Prashanth Jampani; Gattu, Bharat; Shanthi, Pavithra Murugavel; Damle, Sameer Satish; Basson, Ziev; Bandi, Ramalinga; Datta, Moni Kanchan; Park, Sungkyoo; Kumta, Prashant N.

    2016-01-01

    Graphical abstract: A simple electrospinning methodology is described for generating novel fiber configurations of sulfur for use in lithium-sulfur batteries. Such flexible sulfur wire materials when converted into pellets of sulfur electrodes, exhibit very stable capacities over 135 cycles with high areal capacities (∼2.5 mAh/cm 2 ). Coating the electrodes with an inorganic lithium ion conductor coating results in electrodes exhibiting ∼650 mAh/g capacity and an impressive low fade rate of ∼0.003% fade/cycle. - Highlights: • Flexible sulfur wires (Flex-SW) generated using a simple electrospinning process. • Areal capacities of of ∼2.75 mAh/cm 2 with excellent stability upto 135 cycles observed. • Lithium ion conductor (LIC) coating on the Flex-SWs yield capacities of ∼620 mAh/g. • LIC coated Flex-SWs exhibit exceptionally low fade rate of 0.003%/cycle. - Abstract: A simple electrospinning methodology is described for generating novel fiber configurations of sulfur with the potential of yielding high performance sulfur electrodes for use in lithium-sulfur batteries. The unique fiber morphology derived by electrospinning has the capability of generating flexible sulfur yarns for the first time rendering them a highly attractive platform for small-scale mobile device applications such as textile-batteries. The electrospinning methodology reported herein also allows for the formation of a polymer-sulfur interface which acts as a physical barrier to liquid lithium electrolyte facilitating the reduction of polysulfide dissolution, a primary barrier to the progress of Li-S systems. Such flexible sulfur wire materials when converted into pellet sulfur electrodes, exhibit very stable capacities over 135 cycles with high areal capacities (∼2.5 mAh cm −2 ). Coating the electrodes with an inorganic lithium ion conductor coating results in further improvement of cycling behavior with electrodes of ∼650 mAh g −1 capacity and an impressive low fade rate

  1. Determination of sulfur dioxide by a radiorelease method

    Energy Technology Data Exchange (ETDEWEB)

    Sriman Narayanan, S.; Rao, V.R.S. (Indian Inst. of Tech., Madras. Dept. of Chemistry)

    1983-04-13

    A radiorelease technique for the determination of sulfur dioxide using radiochlor /sup 36/Cl-amine-T is described. Methods for the elimination of interference from coexisting gases are also reported. 1-40 ppm sulfur dioxide can be determined.

  2. Determination of sulfur dioxide by a radiorelease method

    International Nuclear Information System (INIS)

    Sriman Narayanan, S.; Rao, V.R.S.

    1983-01-01

    A radiorelease technique for the determination of sulfur dioxide using radiochlor 36 Cl-amine-T is described. Methods for the elimination of interference from coexisting gases are also reported. 1-40 ppm sulfur dioxide can be determined. (author)

  3. Total Sulfur Deposition (wet+dry) from the Atmosphere

    Data.gov (United States)

    U.S. Environmental Protection Agency — Sulfur Dioxide (SO2) is emitted primarily as a by-product of coal combustion from power plants. Sulfur Dioxide reacts in the atmosphere to form other chemical such...

  4. Sulfur-induced structural motifs on copper and gold surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Walen, Holly [Iowa State Univ., Ames, IA (United States)

    2016-01-01

    The interaction of sulfur with copper and gold surfaces plays a fundamental role in important phenomena that include coarsening of surface nanostructures, and self-assembly of alkanethiols. Here, we identify and analyze unique sulfur-induced structural motifs observed on the low-index surfaces of these two metals. We seek out these structures in an effort to better understand the fundamental interactions between these metals and sulfur that lends to the stability and favorability of metal-sulfur complexes vs. chemisorbed atomic sulfur. The experimental observations presented here—made under identical conditions—together with extensive DFT analyses, allow comparisons and insights into factors that favor the existence of metal-sulfur complexes, vs. chemisorbed atomic sulfur, on metal terraces. We believe this data will be instrumental in better understanding the complex phenomena occurring between the surfaces of coinage metals and sulfur.

  5. Sulfuric acid leaching of high iron-bearing zinc calcine

    Science.gov (United States)

    Yang, Jin-lin; Liu, Ji-guang; Xiao, Han-xin; Ma, Shao-jian

    2017-11-01

    Sulfuric acid leaching of high iron-bearing zinc calcine was investigated to assess the effects of sulfuric acid concentration, liquid- to-solid ratio, leaching time, leaching temperature, and the stirring speed on the leaching rates of zinc and iron. The results showed that the sulfuric acid concentration, liquid-to-solid ratio, leaching time, and leaching temperature strongly influenced the leaching of zinc and iron, whereas stirring speed had little influence. Zinc was mainly leached and the leaching rate of iron was low when the sulfuric acid concentration was less than 100 g/L. At sulfuric acid concentrations higher than 100 g/L, the leaching rate of iron increased quickly with increasing sulfuric acid concentration. This behavior is attributed to iron-bearing minerals such as zinc ferrite in zinc calcine dissolving at high temperatures and high sulfuric acid concentrations but not at low temperatures and low sulfuric acid concentrations.

  6. Forces due to surface water measured by force microscopy. Consequences for anchoring biological cells to surfaces

    International Nuclear Information System (INIS)

    Schilcher, K.

    1997-05-01

    Interaction forces in 'Scanning Force Microscopy' (SFM). Force curves revealed exponentially decaying, attractive forces between silicon tip and silicon sample in aqueous media. Replacing the silicon sample by a sheet of mica, the interaction forces had both, an attractive and a repulsive component. Addition of salts generally reduced the forces. At 500 mM salt concentration, the attractive force became quantized with a residual force value of 23 pN. The attractive force is attributed to the gain in energy of water molecules which are released from surface water into free water during tip-sample approach. This conclusion is supported by a statistical model. The repulsive force contribution in the case of mica, is caused by hydration forces due to the spatial organization of crystalline water on the mica surface. Anchoring of biological cells. Molecular resolution of cell surfaces by SFM requires cell anchoring without interference with cell physiology. For this a novel strategy, 'hydrophobic anchoring' was designed. It avoids strong attractive forces between cell and by using a flexible spacer molecule. It establishes anchoring by a lipid (bound to the spacer), which weakly interacts with the hydrophobic core of the cell membrane. The method was subjected to tests using RBL-2H3, CH0 αβ and HEK-293 cells. The strength of cell anchoring was assayed by shear forces. In all cases 'hydrophobic anchoring' via a spacer caused elective anchoring much beyond controls. Such cell anchoring was employed for the imaging of RBL-2H3 cells by SFM. Images showed considerable finer details than images of loosely adsorbed cells. With about 50 rim resolution, SFM succeeded in imaging microvilli, filopodia, single cytoskeletal fibers (microtubules, microfilaments) and vesicles. In addition, as a consequence of cell stimulation upon ionomycin treatment, lamellae formation and the appearance of secretory granules on top of them were observed which indicates the viability of anchored

  7. Iron anchors of Northern Odisha, east coast India: Maritime contacts with European countries

    Digital Repository Service at National Institute of Oceanography (India)

    Tripati, S.; Patnaik, S.K.; Acharya, S.B.

    and agricultural products (Habib 1982: 49– 6    52). As iron was in abundance in the Nilgiri hills region, the area may have been the source for the raw materials in the manufacture of these anchors. Ascertaining the owners of these anchors is difficult because...th century lexicon, Bahar-i Ajam, describes a langar made of iron used to stop vessels from moving away (Qaisar 1982: 27). In the second half of the 17th century, attempts were made to manufacture iron anchors in India and a breakthrough...

  8. 'Saurashtra stone anchors' (Ring-stones) from Dwarka and Somnath, west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Gaur, A.S.; Sundaresh; Tripati, S.; Gudigar, P.; Bandodkar, S.N.

    , semi-curved top with an axial hole; diameter of the hole is same at both ends. Often the chisel marks have been noticed on the surface and in the hole. The 'Saurashtra Stone Anchors' (Ring-stones) Dwarka and Somnath 133 average estimated weight... chisel marks have also been noticed on some of the anchors. The average weight of this group is 98 kg. The heaviest anchor (no. 8) weighs 205 kg and the lightest (no. 14) 64 kg. Group III: Ring-stone numbers 1, 6, 11, 18 and 22 fall in this last...

  9. Extrusion of bone anchor suture following flexor digitorum profundus tendon avulsion injury repair.

    LENUS (Irish Health Repository)

    Tiong, William H C

    2011-09-01

    Flexor digitorum profundus (FDP) zone I tendon avulsion injury is traditionally repaired with a pullout suture technique. More recently, bone anchor sutures have been used as a viable alternative and have largely replaced areas in hand surgery where pullout suture technique was once required. To date, there have been very few complications reported related to bone anchor suture use in FDP tendon reattachment to the bone. We report a very unusual case of extrusion of bone anchor through the nailbed, 6 years after zone I FDP tendon avulsion injury repair and a brief review of literature.

  10. Fragmentation of Ceramics in Rapid Expansion Mode

    Science.gov (United States)

    Maiti, Spandan; Geubelle, Philippe H.; Rangaswamy, Krishnan

    The study of the fragmentation process goes back to more than a century, motivated primarily by problems related to mining and ore handling (Grady and Kipp, 1985). Various theories have been proposed to predict the fragmentation stress and the fragment size and distribution. But the investigations are generally case specific and relate to only a narrow set of fragmentation processes. A number of theoretical studies of dynamic fragmentation in a rapidly expanding body can be found in the literature. For example, the study summarized in (Grady, 1982) presents a model based on a simple energy balance concept between the surface energy released due to fracture and the kinetic energy of the fragments. Subsequent refinements of the energy balance model have been proposed by (Glenn and Chudnovsky, 1986), which take into account the strain energy of the fragments and specify a threshold stress below which no fragmentation occurs. These models assume that the fracture events are instantaneous and occur simultaneously. Evidently, these assumptions are quite restrictive and these models can not take into account the transient nature of the fragmentation process after the onset of fracture in the material. A more recent model proposed by (Miller et al., 1999) however takes into account this time-dependent nature of the fragmentation event and the distribution of flaws of various strengths in the original material.

  11. Fragmentation in Carbon Therapy Beams

    CERN Document Server

    Charara, Y M

    2010-01-01

    The state of the art Monte Carlo code HETC-HEDS was used to simulate spallation products, secondary neutron, and secondary proton production in A-150 Tissue Equivalent Plastic phantoms to investigate fragmentation of carbon therapy beams. For a 356 MeV/Nucleon carbon ion beam, production of charged particles heavier than protons was 0.24 spallation products per incident carbon ion with atomic numbers ranging from 1 through 5 (hydrogen to boron). In addition, there were 4.73 neutrons and 2.95 protons produced per incident carbon ion. Furthermore, as the incident energy increases, the neutron production rate increases at a rate of 20% per 10 MeV/nucleon. Secondary protons were created at a rate between 2.62-2.87 per carbon ion, while spallation products were created at a rate between 0.20-0.24 per carbon ion.

  12. Dynamic effects in fragmentation reactions

    International Nuclear Information System (INIS)

    Bertsch, G. F.; Esbensen, H.

    2002-01-01

    Fragmentation reactions offer a useful tool to study the spectroscopy of halo nuclei, but the large extent of the halo wave function makes the reaction theory more difficult. The simple reaction models based on the eikonal approximation for the nuclear interaction or first-order perturbation theory for the Coulomb interaction have systematic errors that they investigate here, comparing to the predictions of complete dynamical calculations. They find that stripping probabilities are underpredicted by the eikonal model, leading to extracted spectroscopy strengths that are two large. In contrast, the Coulomb excitation is overpredicted by the simple theory. They attribute this to a screening effect, as is well known in the Barkas effect on stopping powers. The errors decrease with beam energy as E(sub beam)(sup -1), and are not significant at beam energies above 50 MeV/u. At lower beam energies, the effects should be taken into account when extracting quantitative spectroscopic strengths

  13. 40 CFR 180.444 - Sulfur dioxide; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... § 180.444 Sulfur dioxide; tolerances for residues. A tolerance is established as follows for sulfite residues of the fungicide sulfur dioxide (determined as (SO2)) in or on the following raw agricultural... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Sulfur dioxide; tolerances for...

  14. Multiscale detection of sulfur cinquefoil using aerial photography.

    Science.gov (United States)

    Bridgett J. Naylor; Bryan A. Endress; Catherine G. Parks

    2005-01-01

    We evaluated the effectiveness of natural color aerial photography as a tool to improve detection, monitoring, and mapping of sulfur cinquefoil (Potentilla recta L.) infestations. Sulfur cinquefoil is an exotic perennial plant invading interior Pacific Northwest rangelands. Because sulfur cinquefoil produces distinctive pale yellow flowers, we...

  15. 40 CFR 52.1030 - Control strategy: Sulfur oxides.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Control strategy: Sulfur oxides. 52.1030 Section 52.1030 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS...: Sulfur oxides. (a) The revision to Regulation 100.6 (Chapter 106) “Low Sulfur Fuel Regulation” for the...

  16. 40 CFR 52.2780 - Control strategy for sulfur oxides.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 4 2010-07-01 2010-07-01 false Control strategy for sulfur oxides. 52... strategy for sulfur oxides. (a) The requirements of subpart G of this chapter are not met since there has... maintenance of the national ambient air quality standards for sulfur oxides on the island of St. Croix. (b...

  17. 40 CFR 52.231 - Regulations: Sulfur oxides.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Regulations: Sulfur oxides. 52.231... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS California § 52.231 Regulations: Sulfur oxides... Ambient Air Quality Standard for Sulfur Oxides. (1) Lake County Intrastate Region. (i) Lake County, APCD...

  18. 40 CFR 60.104 - Standards for sulfur oxides.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false Standards for sulfur oxides. 60.104... Refineries § 60.104 Standards for sulfur oxides. Each owner or operator that is subject to the requirements... device to reduce SO2 emission, maintain sulfur oxides emissions calculated as SO2 to the atmosphere less...

  19. 40 CFR 52.57 - Control strategy: Sulfur oxides.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 3 2010-07-01 2010-07-01 false Control strategy: Sulfur oxides. 52.57... (CONTINUED) APPROVAL AND PROMULGATION OF IMPLEMENTATION PLANS Alabama § 52.57 Control strategy: Sulfur oxides... for attainment and maintenance of the national standards for sulfur oxides in the vicinity of the...

  20. Relationship between corrosion and the biological sulfur cycle: A review

    Energy Technology Data Exchange (ETDEWEB)

    Little, B.J.; Ray, R.I.; Pope, R.K.

    2000-04-01

    Sulfur and sulfur compounds can produce pitting, crevice corrosion, dealloying, stress corrosion cracking, and stress-oriented hydrogen-induced cracking of susceptible metals and alloys. Even though the metabolic by-products of the biological sulfur cycle are extremely corrosive, there are no correlations between numbers and types of sulfur-related organisms and the probability or rate of corrosion, Determination of specific mechanisms for corrosion caused by microbiologically mediated oxidation and reduction of sulfur and sulfur compounds is complicated by the variety of potential metabolic-energy sources and by-products; the coexistence of reduced and oxidized sulfur species; competing reactions with inorganic and organic compounds; and the versatility and adaptability of microorganisms in biofilms. The microbial ecology of sulfur-rich environments is poorly understood because of the association of aerobes and anaerobes and the mutualism or succession of heterotrophs to autotrophs. The physical scale over which the sulfur cycle influences corrosion varies with the environment. The complete sulfur cycle of oxidation and reduction reactions can take place in macroenvironments, including sewers and polluted harbors, or within the microenvironment of biofilms. In this review, reactions of sulfur and sulfur compounds resulting in corrosion were discussed in the context of environmental processes important to corrosion.

  1. Physiology of alkaliphilic sulfur-oxidizing bacteria from soda lakes

    NARCIS (Netherlands)

    Banciu, H.L.

    2004-01-01

    The inorganic sulfur oxidation by obligate haloalkaliphilic chemolithoautotrophs was only recently discovered and investigated. These autotrophic sulfur oxidizing bacteria (SOB), capable of oxidation of inorganic sulfur compounds at moderate to high salt concentration and at high pH, can be divided

  2. 46 CFR 153.545 - Special requirements for liquid sulfur.

    Science.gov (United States)

    2010-10-01

    ... tank that carries liquid sulfur must be oil tight. (c) A cargo tank that carries liquid sulfur and the... CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and... carrying liquid sulfur must have: (1) A cargo tank ventilation system that: (i) Maintains the H2S vapor...

  3. Mercury chemisorption by sulfur adsorbed in porous materials

    NARCIS (Netherlands)

    Steijns, M.; Peppelenbos, A.; Mars, P.

    1976-01-01

    The sorption of mercury vapor by adsorbed sulfur in the zeolites CaA (= 5A) and NaX (=13X) and two types of active carbon has been measured at a temperature of 50°C. With increasing degree of micropore filling by sulfur the fraction of sulfur accessible to mercury atoms decreased for CaA and NaX.

  4. Iron Sulfur Proteins and their Synthetic Analogues: Structure ...

    Indian Academy of Sciences (India)

    group of non-heme iron-sulfur (Fe-S) compounds are involved in ... The sulfur ligands are arranged tetrahedrally about the iron atoms. The presence of inorganic sulfur is indicated through the release of. H. 2. S gas when these proteins are treated with a ... analysis of this structure and the tri-iron cluster was corrected as.

  5. Biomechanical analysis of pullout strengths of rotator cuff and glenoid anchors: 2011 update.

    Science.gov (United States)

    Barber, F Alan; Herbert, Morley A; Hapa, Onur; Rapley, Jay H; Barber, Cameron A K; Bynum, James A; Hrnack, Scott A

    2011-07-01

    To evaluate the biomechanical and design characteristics of newer suture anchors. Suture anchors were tested in fresh porcine metaphyseal cortex and cancellous troughs by use of an established protocol. A mechanical testing machine applied tensile loads parallel to the axis of insertion at 12.5 mm/s until failure, and mean anchor failure strengths were calculated. The mode of failure was recorded. Rotator cuff anchors tested included the Doubleplay and Opus SpeedScrew (ArthroCare Sports Medicine, Sunnyvale, CA); PEEK Intraline and PEEK Zip (Stryker, San Jose, CA); Paladin, SuperRevo FT, and CrossFT (ConMed Linvatec, Largo, FL); Piton (Tornier, Warsaw, IN); Ti Screw, ALLthread PEEK, LactoScrew, ALLthread Ti, and ALLthread PEEK knotless (Biomet Sports Medicine, Warsaw, IN). Glenoid anchors included the Gryphon BR P (DePuy-Mitek, Raynham, MA) and JuggerKnot 1.4 (Biomet Sports Medicine). Mean cortical failure loads for cuff anchors were as follows: Doubleplay 5.0, 279 N; Doubleplay 6.5, 338 N; Opus SpeedScrew 5.5, 356 N; Opus SpeedScrew 6.5, 336 N; PEEK Intraline 5.5, 263 N; PEEK Intraline 6.5, 344 N; PEEK Zip 5.5, 435 N; PEEK Zip 6.5, 502 N; Paladin 5.0, 500 N; Paladin 6.5, 521 N; SuperRevo FT, 496 N; CrossFT, 569 N; Piton, 379 N; Ti Screw 5.0, 457 N; Ti Screw 6.5, 443 N; ALLthread PEEK 5.5, 476 N; LactoScrew 5.5, 403 N; ALLthread Ti 5.0, 526 N; ALLthread Ti 6.5, 653 N; and ALLthread PEEK knotless, 441 N). Mean cortical failure loads for glenoid anchors were 161 N for Gryphon BR P and 239 N for JuggerKnot 1.4. Mean cancellous bone failure loads for cuff anchors were Doubleplay 5.0, 263 N; Doubleplay 6.5, 340 N; Opus SpeedScrew 5.5, 356 N; Opus SpeedScrew 6.5, 344 N; PEEK Intraline 5.5, 274 N; PEEK Intraline 6.5, 327 N; PEEK Zip 5.5, 401 N; PEEK Zip 6.5, 396 N; Paladin 5.0, 427 N; Paladin 6.5, 491 N; SuperRevo FT, 483 N; CrossFT, 547 N; Piton, 365 N; Ti Screw 5.0, 420 N; Ti Screw 6.5, 448 N; ALLthread PEEK 5.5, 475 N; LactoScrew 5.5, 435 N; ALLthread Ti 5.0, 512 N

  6. Development of enhanced sulfur rejection processes

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, R.H.; Luttrell, G.H.; Adel, G.T.; Richardson, P.E.

    1996-03-01

    Research at Virginia Tech led to the development of two complementary concepts for improving the removal of inorganic sulfur from many eastern U.S. coals. These concepts are referred to as Electrochemically Enhanced Sulfur Rejection (EESR) and Polymer Enhanced Sulfur Rejection (PESR) processes. The EESR process uses electrochemical techniques to suppress the formation of hydrophobic oxidation products believed to be responsible for the floatability of coal pyrite. The PESR process uses polymeric reagents that react with pyrite and convert floatable middlings, i.e., composite particles composed of pyrite with coal inclusions, into hydrophilic particles. These new pyritic-sulfur rejection processes do not require significant modifications to existing coal preparation facilities, thereby enhancing their adoptability by the coal industry. It is believed that these processes can be used simultaneously to maximize the rejection of both well-liberated pyrite and composite coal-pyrite particles. The project was initiated on October 1, 1992 and all technical work has been completed. This report is based on the research carried out under Tasks 2-7 described in the project proposal. These tasks include Characterization, Electrochemical Studies, In Situ Monitoring of Reagent Adsorption on Pyrite, Bench Scale Testing of the EESR Process, Bench Scale Testing of the PESR Process, and Modeling and Simulation.

  7. 21 CFR 582.3862 - Sulfur dioxide.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Sulfur dioxide. 582.3862 Section 582.3862 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS SUBSTANCES GENERALLY RECOGNIZED AS SAFE Chemical Preservatives § 582.3862...

  8. The sulfurous compounds consisting of hydrocarbon fuels

    Directory of Open Access Journals (Sweden)

    Т.В. Медвєдєва

    2004-04-01

    Full Text Available  The sulfurous compounds have been studied and their negative influence on operation properties of the oil and products of its processing have been described. Basic methods of definition of the hydrogen sulphide, mercaptans in the hydrocarbon fuels have been shown.

  9. Wound Healing of Cutaneous Sulfur Mustard Injuries

    Science.gov (United States)

    Graham, John S.; Chilcott, Robert P.; Rice, Paul; Milner, Stephen M.; Hurst, Charles G.; Maliner, Beverly I.

    2005-01-01

    Sulfur mustard is an alkylating chemical warfare agent that primarily affects the eyes, skin, and airways. Sulfur mustard injuries can take several months to heal, necessitate lengthy hospitalizations, and result in significant cosmetic and/or functional deficits. Historically, blister aspiration and/or deroofing (epidermal removal), physical debridement, irrigation, topical antibiotics, and sterile dressings have been the main courses of action in the medical management of cutaneous sulfur mustard injuries. Current treatment strategy consists of symptomatic management and is designed to relieve symptoms, prevent infections, and promote healing. There are currently no standardized or optimized methods of casualty management that prevent or minimize deficits and provide for speedy wound healing. Several laboratories are actively searching for improved therapies for cutaneous vesicant injury, with the aim of returning damaged skin to optimal appearance and normal function in the shortest time. Improved treatment will result in a better cosmetic and functional outcome for the patient, and will enable the casualty to return to normal activities sooner. This editorial gives brief overviews of sulfur mustard use, its toxicity, concepts for medical countermeasures, current treatments, and strategies for the development of improved therapies. PMID:16921406

  10. Sulfur Resistance of Pt-W Catalysts

    Directory of Open Access Journals (Sweden)

    Carolina P. Betti

    2013-01-01

    Full Text Available The sulfur resistance of low-loaded monometallic Pt catalysts and bimetallic Pt-W catalysts during the partial selective hydrogenation of styrene, a model compound of Pygas streams, was studied. The effect of metal impregnation sequence on the activity and selectivity was also evaluated. Catalysts were characterized by ICP, TPR, XRD, and XPS techniques. Catalytic tests with sulfur-free and sulfur-doped feeds were performed. All catalysts showed high selectivities (>98% to ethylbenzene. Activity differences between the catalysts were mainly attributed to electronic effects due to the presence of different electron-rich species of Pt0 and electron-deficient species of Ptδ+. Pt0 promotes the cleavage of H2 while Ptδ+ the adsorption of styrene. The catalyst successively impregnated with W and Pt (WPt/Al was more active and sulfur resistant than the catalyst prepared with an inverse impregnation order (PtW/Al. The higher poison resistance of WPt/Al was attributed to both steric and electronic effects.

  11. RETENTION OF SULFUR DIOXIDE BY NYLON FILTERS

    Science.gov (United States)

    Based on laboratory studies, recovery efficiencies of sulfur dioxide (SO2) were determined for nylon filters. The nylon filters used in these experiments were found to retain SO2. A relatively uniform amount (1.7%) was recoverable from each nylon filter, independent of relative...

  12. Hot-Gas Desulfurization with Sulfur Recovery

    International Nuclear Information System (INIS)

    Portzer, Jeffrey W.; Damle, Ashok S.; Gangwal, Santosh K.

    1997-01-01

    The objective of this study is to develop a second generation HGD process that regenerates the sulfided sorbent directly to elemental sulfur using SO 2 , with minimal consumption of coal gas. The goal is to have better overall economics than DSRP when integrated with the overall IGCC system

  13. Biologically produced sulfur particles and polysulfide ions

    NARCIS (Netherlands)

    Kleinjan, W.E.

    2005-01-01

    This thesis deals with the effects of particles of biologically produced sulfur (or 'biosulfur') on a biotechnological process for the removal of hydrogen sulfide from gas streams. Particular emphasis is given to the role of polysulfide ions in such a process. These

  14. Integrated Science Assessment (ISA) for Sulfur Oxides ...

    Science.gov (United States)

    This draft document provides EPA’s evaluation and synthesis of the most policy-relevant science related to the health effects of sulfur oxides. When final, it will provide a critical part of the scientific foundation for EPA’s decision regarding the adequacy of the current primary (health-based) National Ambient Air Quality Standard (NAAQS) for sulfur dioxide. The references considered for inclusion in or cited in the external review draft ISA are available at https://hero.epa.gov/hero/sulfur-oxides. The intent of the ISA, according to the CAA, is to “accurately reflect the latest scientific knowledge expected from the presence of [a] pollutant in ambient air” (U.S. Code, 1970a, 1970b). It includes an assessment of scientific research from atmospheric sciences, exposure sciences, dosimetry, mode of action, animal and human toxicology, and epidemiology. Key information and judgments formerly found in the Air Quality Criteria Documents (AQCDs) for sulfur oxides (SOx) are included; Annexes provide additional details supporting the ISA. Together, the ISA and Annexes serve to update and revise the last SOx ISA which was published in 2008.

  15. Sulfuric acid thermoelectrochemical system and method

    Science.gov (United States)

    Ludwig, Frank A.

    1989-01-01

    A thermoelectrochemical system in which an electrical current is generated between a cathode immersed in a concentrated sulfuric acid solution and an anode immersed in an aqueous buffer solution of sodium bisulfate and sodium sulfate. Reactants consumed at the electrodes during the electrochemical reaction are thermochemically regenerated and recycled to the electrodes to provide continuous operation of the system.

  16. Annotated bibliography of methods for determining sulfur and forms of sulfur in coal and coal-related materials

    Energy Technology Data Exchange (ETDEWEB)

    Chriswell, C.D.; Norton, G.A.; Akhtar, S.S.; Straszheim, W.E.; Markuszewski, R.

    1993-01-01

    Over 400 published papers, presentations at scientific meetings, and reports relating to the determination of sulfur and sulfur forms in coal-related materials have been accumulated, classified, and an evaluation made of their content.

  17. Leukocyte adhesion and polarization: Role of glycosylphosphatidylinositol-anchored proteins.

    Science.gov (United States)

    Richardson, Dion D; Fernandez-Borja, Mar

    2015-01-01

    Leukocyte traffic out of the blood stream is crucial for an adequate immune response. Leukocyte extravasation is critically dependent on the binding of leukocyte integrins to their endothelial counterreceptors. This interaction enables the firm adhesion of leukocytes to the luminal side of the vascular wall and allows for leukocyte polarization, crawling and diapedesis. Leukocyte adhesion, polarization and migration requires the orchestrated regulation of integrin adhesion/de-adhesion dynamics and actin cytoskeleton rearrangements. Adhesion strength depends on conformational changes of integrin molecules (affinity) as well as the number of integrin molecules engaged at adhesion sites (valency). These two processes can be independently regulated and several molecules modulate either one or both processes. Cholesterol-rich membrane domains (lipid rafts) participate in integrin regulation and play an important role in leukocyte adhesion, polarization and motility. In particular, lipid raft-resident glycosyl-phosphatidyl-inositol-anchored proteins (GPI-APs) have been reported to regulate leukocyte adhesion, polarization and motility in both integrin-dependent and independent manners. Here, we present our recent discovery concerning the novel role of the GPI-AP prion protein (PrP) in the regulation of β1 integrin-mediated monocyte adhesion, migration and shape polarization in the context of existing literature on GPI-AP-dependent regulation of integrins.

  18. Gold nanoparticles assembled with dithiocarbamate-anchored molecular wires

    Science.gov (United States)

    Reeler, Nini E. A.; Lerstrup, Knud A.; Somerville, Walter; Speder, Jozsef; Petersen, Søren V.; Laursen, Bo W.; Arenz, Matthias; Qiu, Xiaohui; Vosch, Tom; Nørgaard, Kasper

    2015-01-01

    A protocol for the bottom-up self-assembly of nanogaps is developed through molecular linking of gold nanoparticles (AuNPs). Two π-conjugated oligo(phenylene ethynylene) molecules (OPE) with dithiocarbamate anchoring groups are used as ligands for the AuNPs. OPE-4S with a dithiocarbamate in each end of the molecule and a reference molecule OPE-2S with only a single dithiocarbamate end group. The linking mechanism of OPE-4S is investigated by using a combination of TEM, UV-Vis absorption and surface enhanced Raman spectroscopy (SERS) as well as studying the effect of varying the OPE-4S to AuNP concentration ratio. UV-Vis absorption confirms the formation of AuNP aggregates by the appearance of an extended plasmon band (EPB) for which the red shift and intensity depend on the OPE-4S:AuNP ratio. SERS confirms the presence of OPE-4S and shows a gradual increase of the signal intensity with increasing OPE-4S:AuNP ratios up to a ratio of about 4000, after which the SERS intensity does not increase significantly. For OPE-2S, no linking is observed below full coverage of the AuNPs indicating that the observed aggregate formation at high OPE-2S:AuNP ratios, above full AuNP coverage, is most likely of a physical nature (van der Waals forces or π-π interactions). PMID:26471461

  19. Collagenous microstructure of the glenoid labrum and biceps anchor.

    Science.gov (United States)

    Hill, A M; Hoerning, E J; Brook, K; Smith, C D; Moss, J; Ryder, T; Wallace, A L; Bull, A M J

    2008-06-01

    The glenoid labrum is a significant passive stabilizer of the shoulder joint. However, its microstructural form remains largely unappreciated, particularly in the context of its variety of functions. The focus of labral microscopy has often been histology and, as such, there is very little appreciation of collagen composition and arrangement of the labrum, and hence the micromechanics of the structure. On transmission electron microscopy, significant differences in diameter, area and perimeter were noted in the two gross histological groups of collagen fibril visualized; this suggests a heterogeneous collagenous composition with potentially distinct mechanical function. Scanning electron microscopy demonstrated three distinct zones of interest: a superficial mesh, a dense circumferential braided core potentially able to accommodate hoop stresses, and a loosely packed peri-core zone. Confocal microscopy revealed an articular surface fine fibrillar mesh potentially able to reduce surface friction, bundles of circumferential encapsulated fibres in the bulk of the tissue, and bone anchoring fibres at the osseous interface. Varying microstructure throughout the depth of the labrum suggests a role in accommodating different types of loading. An understanding of the labral microstructure can lead to development of hypotheses based upon an appreciation of this component of material property. This may aid an educated approach to surgical timing and repair.

  20. High performance supercapacitors using metal oxide anchored graphene nanosheet electrodes

    KAUST Repository

    Baby, Rakhi Raghavan

    2011-01-01

    Metal oxide nanoparticles were chemically anchored onto graphene nanosheets (GNs) and the resultant composites - SnO2/GNs, MnO2/GNs and RuO2/GNs (58% of GNs loading) - coated over conductive carbon fabric substrates were successfully used as supercapacitor electrodes. The results showed that the incorporation of metal oxide nanoparticles improved the capacitive performance of GNs due to a combination of the effect of spacers and redox reactions. The specific capacitance values (with respect to the composite mass) obtained for SnO2/GNs (195 F g-1) and RuO 2/GNs (365 F g-1) composites at a scan rate of 20 mV s-1 in the present study are the best ones reported to date for a two electrode configuration. The resultant supercapacitors also exhibited high values for maximum energy (27.6, 33.1 and 50.6 W h kg-1) and power densities (15.9, 20.4 and 31.2 kW kg-1) for SnO2/GNs, MnO2/GNs and RuO2/GNs respectively. These findings demonstrate the importance and great potential of metal oxide/GNs based composite coated carbon fabric in the development of high-performance energy-storage systems. © 2011 The Royal Society of Chemistry.

  1. Development of a prediction system for tail-anchored proteins.

    Science.gov (United States)

    Shigemitsu, Shunsuke; Cao, Wei; Terada, Tohru; Shimizu, Kentaro

    2016-09-15

    "Tail-anchored (TA) proteins" is a collective term for transmembrane proteins with a C-terminal transmembrane domain (TMD) and without an N-terminal signal sequence. TA proteins account for approximately 3-5 % of all transmembrane proteins that mediate membrane fusion, regulation of apoptosis, and vesicular transport. The combined use of TMD and signal sequence prediction tools is typically required to predict TA proteins. Here we developed a prediction system named TAPPM that predicted TA proteins solely from target amino acid sequences according to the knowledge of the sequence features of TMDs and the peripheral regions of TA proteins. Manually curated TA proteins were collected from published literature. We constructed hidden markov models of TA proteins as well as three different types of transmembrane proteins with similar structures and compared their likelihoods as TA proteins. Using the HMM models, we achieved high prediction accuracy; area under the receiver operator curve values reaching 0.963. A command line tool written in Python is available at https://github.com/davecao/tappm_cli .

  2. The bone-anchored hearing aid for children: recent developments.

    Science.gov (United States)

    Snik, Ad; Leijendeckers, Joop; Hol, Myrthe; Mylanus, Emmanuel; Cremers, Cor

    2008-09-01

    In 1984 the Bone-Anchored Hearing Aid, or BAHA, system was introduced. Its transducer is coupled directly to the skull percutaneously to form a highly effective bone-conduction hearing device. Clinical studies on adults with conductive hearing loss have shown that the BAHA system outperforms conventional bone-conduction hearing aids. Therefore, the next step was to apply the BAHA system in children with congenital or acquired conductive hearing loss. Reviewed data showed that, on average, such children benefited significantly more from the BAHA than from reconstructive surgery. Thus, BAHA application appears to be the best option to achieve normal communication and speech and language development in children with bilateral conductive hearing loss. However, in children under the age of three to four years, a conventional solution must be applied, e.g. a bone conductor with a transcutaneous coupling, because they are too young to undergo BAHA implant surgery. In the case of unilateral congenital conductive hearing loss, there is no convincing evidence in the clinical literature for early intervention. In summary, the BAHA system can be considered a new, indispensable tool for children with bilateral conductive hearing loss.

  3. Clinical experience of bone anchored hearing aid: a case report.

    Science.gov (United States)

    Miyasaka, Muneo; Akamatsu, Tadashi; Yamazaki, Akihisa; Tanaka, Rica

    2008-04-20

    To improve conventional bone conduction hearing aids, Tjellstrom, Branemark, developed an implant system consisting of a maxillofacial implant that derived from dental implants and a bone conduction hearing aid that was attached directly to the implant. This system has been commercially available as a bone anchored hearing aid (BAHA). More than 10,000 patients have benefited from BAHA in Scandinavia, North America, and many other regions. BAHA first became available in 1977 in Sweden but has not been used in Japan as widely as expected. This paper reports a case of a 8-year use of BAHA for hearing loss caused by microtia and external auditory canal atresia, with a review of literature. The patient has been followed up for 9 years after implant placement. Play audiometry with a loudspeaker showed a hearing loss of 25 dB. The patient says that BAHA is superior to conventional transcutaneous bone conduction hearing aids in easiness of attachment, esthetics, and speech recognition and music recognition. The skin and the bone around the implants remain in favorable condition. She has been free from the use of a headband for a conventional hearing aid.

  4. Surgery for the bone-anchored hearing aid.

    Science.gov (United States)

    Arnold, Andreas; Caversaccio, Marco-Domenico; Mudry, Albert

    2011-01-01

    This review covers the surgery for the bone-anchored hearing aid (Baha(®)). PREOPERATIVE WORKUP: A review of the indications and preoperative diagnostics shows that best results are generally obtained in patients with conductive or mixed hearing loss rehabilitation when surgery is not applicable or has failed and in patients that suffer from single-sided deafness. An audiogram must confirm that the bone conduction hearing is within the inclusion criteria. A computed tomography scan is performed in cases of malformation to assure sufficient bone thickness at the site of screw implantation. The steps of the Baha implantation are described step by step including the setting and anesthesia, skin work with regard to different techniques, correct resection of subcutaneous tissue, preparation of the implant site, drilling and placement of the fixture and wound closure. After wound healing (6-8 weeks), the bone conduction aid is fitted on the abutment. Regular cleaning of the fixture is important to avoid irritations and infections. If performed carefully, the surgery for the Baha has a favorable outcome, regardless of the technique used. Copyright © 2011 S. Karger AG, Basel.

  5. [Clinical application of bone-anchored hearing aid implantation].

    Science.gov (United States)

    Xia, Yin; Zhang, Hua; Gong, Shu-sheng; Wang, Dan-ni; Zheng, Ya-li; Li, Yu-ling; Dong, Bo-ya; Han, De-min

    2013-08-01

    To discuss the indications, surgery methods and effects of the BAHA implantation by analyzing the patients' medical records of bone-anchored hearing aids(BAHA). Retrospective analyzed the records of 16 patients of BAHA implantation, including nine males and seven females. Their average age was 31 years old (8-53ys). Nine of them were congenital ear malformation, two were chronic suppurative otitis media, two were otosclerosis and three were unilateral severe sensorineural deafness. We evaluated their pure tone audiometry (PTA), speech audiometry and temporal CT before the surgery, and evaluated the aided PTA in soundfield and speech audiometry in sound field. These patients received BAHA implantation and installed the speech processor their months later. The average preoperative PTA measurements (PTA at 0.5, 1, 2, 4 kHz) was (63.2 ± 19.0) dB HL and postoperative aided PTA in sound field was (35.5 ± 10.9)dB HL. The average improvement in Hearing In Noise Test (HINT) was 37.0% ± 31.7%. The average improvement in Mandarin Speech Test was 76.0% ± 19.7%. After 4-16 months' follow-up, no significant complications were recorded. BAHA is a safe and effective bone implantable hearing device.

  6. Bone-anchored hearing device placement with translabyrinthine tumor removal.

    Science.gov (United States)

    McRackan, Theodore R; Goddard, John C; Wilkinson, Eric P; Slattery, William H; Brackmann, Derald E

    2015-02-01

    Translabyrinthine resection of intracranial tumors results in single-sided deafness, which can be treated by surgical and nonsurgical means. Here we describe the first series examining complication and device usage rates among patients receiving a surgically implanted bone-anchored hearing device (BAHD) at the time of translabyrinthine tumor removal. Case series with chart review. Private tertiary neurotologic referral center. Patients (N = 154) undergoing concurrent BAHD placement and translabyrinthine tumor resection. Concurrent BAHD placement and translabyrinthine tumor removal. Postoperative complication rates and BAHD usage. Of the 154 patients, 121 (78.6%) had no device-related complications. The most common device-related complications were skin overgrowth (8.4%), acute infection (5.2%), and chronic infection (3.2%). The overall and specific complication rates did not differ from published BAHD complication rates. One patient (0.6%) developed a cerebrospinal leak through the surgical site for the device. At the time of last follow-up (mean, 39.8 months), 151 patients (95.0%) were still using their devices. Patients undergoing concurrent translabyrinthine tumor removal and BAHD placement exhibit similar device-related complication profiles as patients undergoing standard device placement. Based on these outcomes and the high long-term usage rates, BAHD insertion at the time of translabyrinthine intracranial surgery can be considered a safe and useful procedure. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2014.

  7. Regulation of dissimilatory sulfur oxidation in the purple sulfur bacterium Allochromatium vinosum

    Directory of Open Access Journals (Sweden)

    Frauke eGrimm

    2011-03-01

    Full Text Available In the purple sulfur bacterium Allochromatium vinosum, thiosulfate oxidation is strictly dependent on the presence of three periplasmic Sox proteins encoded by the soxBXAK and soxYZ genes. It is also well documented that proteins encoded in the dsr (dissimilatory sulfite reductase operon, dsrABEFHCMKLJOPNRS, are essential for the oxidation of sulfur that is stored intracellularly as an obligatory intermediate during the oxidation of thiosulfate and sulfide. Until recently, detailed knowledge about the regulation of the sox genes was not available. We started to fill this gap and show that these genes are expressed on a low constitutive level in A. vinosum in the absence of reduced sulfur compounds. Thiosulfate and possibly sulfide lead to an induction of sox gene transcription. Additional translational regulation was not apparent. Regulation of soxXAK is probably performed by a two-component system consisting of a multisensor histidine kinase and a regulator with proposed di-guanylate cyclase activity. Previous work already provided some information about regulation of the dsr genes encoding the second important sulfur-oxidizing enzyme system in the purple sulfur bacterium. The expression of most dsr genes was found to be at a low basal level in the absence of reduced sulfur compounds and enhanced in the presence of sulfide. In the present work, we focused on the role of DsrS, a protein encoded by the last gene of the dsr locus in A. vinosum. Transcriptional and translational gene fusion experiments suggest a participation of DsrS in the post-transcriptional control of the dsr operon. Characterization of an A. vinosum ΔdsrS mutant showed that the monomeric cytoplasmic 41.1 kDa protein DsrS is important though not essential for the oxidation of sulfur stored in the intracellular sulfur globules.

  8. Organic sulfur metabolisms in hydrothermal environments.

    Science.gov (United States)

    Rogers, Karyn L; Schulte, Mitchell D

    2012-07-01

    Sulfur is central to the metabolisms of many organisms that inhabit extreme environments. While biotic and abiotic cycling of organic sulfur compounds has been well documented in low-temperature anaerobic environments, cycling of organic sulfur in hydrothermal environments has received less attention. Recently published thermodynamic data have been used to estimate aqueous alkyl thiol and sulfide activities in deep-sea hydrothermal systems. Here we use geochemical mixing models to predict fluid compositions that result from mixing end-member hydrothermal fluid from the East Pacific Rise with bottom seawater. These fluid compositions are combined with estimates of methanethiol and dimethylsulfide activities to evaluate energy yields for potential organic sulfur-based metabolisms under hydrothermal conditions. Aerobic respiration has the highest energy yields (over -240 kJ/mol e⁻) at lower temperature; however, oxygen is unlikely to persist at high temperatures, restricting aerobic respiration to mesophilic communities. Nitrite reduction to N₂ has the highest energy yields at higher temperatures (greater than ∼40 °C). Nitrate and nitrite reduction to ammonium also yield significant energy (up to -70 kJ/mol e⁻). Much lower, but still feasible energy yields are calculated for sulfate reduction, disproportionation, and reduction with H₂. Organic compound family and the activity of methanethiol and dimethylsulfide were less important than metabolic strategy in determining overall energy yields. All metabolic strategies considered were exergonic within some portion of the mixing regime suggesting that organic sulfur-based metabolisms may be prevalent within deep-sea hydrothermal vent microbial communities. © 2012 Blackwell Publishing Ltd.

  9. Effects of sulfur oxides on eicosanoids

    International Nuclear Information System (INIS)

    Chen, L.C.; Miller, P.D.; Amdur, M.O.

    1989-01-01

    Ultrafine metal oxides and SO2 react during coal combustion or smelting operations to form primary emissions coated with an acidic SOx layer. Ongoing work in this laboratory has examined the effects of sulfur oxides on pulmonary functions of guinea pigs. We have previously reported that 20 micrograms/m3 acidic sulfur oxide as a surface layer on ultrafine ZnO particles decreases lung volumes, decreases carbon monoxide diffusing capacity, and causes lung inflammation in guinea pigs after 4 daily 3-h exposures. It also produces bronchial hypersensitivity following a single 1-h exposure. The importance of this surface layer is demonstrated by our observation that 200 micrograms/m3 of sulfuric acid droplets of equivalent size are needed to produce the same degree of hypersensitivity. This study characterized the concentration-dependent effects of in vivo exposures to sulfur oxides on arachidonic acid metabolism in the guinea pig lung, and investigated the time course and the relation between eicosanoid composition and pulmonary functions. We focused specifically on four cyclooxygenase metabolites of arachidonic acid, that is, prostaglandins (PG) E1, F2 alpha, 6-keto prostaglandin F1 alpha, and thromboxane (Tx) B2, and two groups of sulfidopeptide leukotrienes (C4, D4, E4, and F4). Guinea pigs were exposed to ultrafine ZnO aerosol (count median diameter = 0.05 microns, sigma g = 1.80) with a layer of acidic sulfur oxide on the surface of the particles. Lung lavage was collected after exposures, and the levels of arachidonic acid metabolites were determined using radioimmunoassay (RIA). Concentration-dependent promotion of PGF2 alpha and concentration-dependent suppression of LtB4 were observed. The increased PGF2 alpha was associated with depressed vital capacity and diffusing capacity of the lungs measured in guinea pigs exposed to the same atmosphere described in a previous study

  10. Effects of sulfur oxides on eicosanoids

    Energy Technology Data Exchange (ETDEWEB)

    Chen, L.C.; Miller, P.D.; Amdur, M.O. (New York Univ. Medical Center, Tuxedo (USA))

    1989-01-01

    Ultrafine metal oxides and SO2 react during coal combustion or smelting operations to form primary emissions coated with an acidic SOx layer. Ongoing work in this laboratory has examined the effects of sulfur oxides on pulmonary functions of guinea pigs. We have previously reported that 20 micrograms/m3 acidic sulfur oxide as a surface layer on ultrafine ZnO particles decreases lung volumes, decreases carbon monoxide diffusing capacity, and causes lung inflammation in guinea pigs after 4 daily 3-h exposures. It also produces bronchial hypersensitivity following a single 1-h exposure. The importance of this surface layer is demonstrated by our observation that 200 micrograms/m3 of sulfuric acid droplets of equivalent size are needed to produce the same degree of hypersensitivity. This study characterized the concentration-dependent effects of in vivo exposures to sulfur oxides on arachidonic acid metabolism in the guinea pig lung, and investigated the time course and the relation between eicosanoid composition and pulmonary functions. We focused specifically on four cyclooxygenase metabolites of arachidonic acid, that is, prostaglandins (PG) E1, F2 alpha, 6-keto prostaglandin F1 alpha, and thromboxane (Tx) B2, and two groups of sulfidopeptide leukotrienes (C4, D4, E4, and F4). Guinea pigs were exposed to ultrafine ZnO aerosol (count median diameter = 0.05 microns, sigma g = 1.80) with a layer of acidic sulfur oxide on the surface of the particles. Lung lavage was collected after exposures, and the levels of arachidonic acid metabolites were determined using radioimmunoassay (RIA). Concentration-dependent promotion of PGF2 alpha and concentration-dependent suppression of LtB4 were observed. The increased PGF2 alpha was associated with depressed vital capacity and diffusing capacity of the lungs measured in guinea pigs exposed to the same atmosphere described in a previous study.

  11. Impact failure and fragmentation properties of metals

    Energy Technology Data Exchange (ETDEWEB)

    Grady, D.E. [Applied Research Associates, Albuquerque, NM (United States); Kipp, M.E. [Sandia National Labs., Albuquerque, NM (United States)

    1998-03-01

    In the present study we describe the development of an experimental fracture material property test method specific to dynamic fragmentation. Spherical test samples of the metals of interest are subjected to controlled impulsive stress loads by acceleration to high velocities with a light-gas launcher facility and subsequent normal impact on thin plates. Motion, deformation and fragmentation of the test samples are diagnosed with multiple flash radiography methods. The impact plate materials are selected to be transparent to the x-ray method so that only test metal material is imaged. Through a systematic series of such tests both strain-to-failure and fragmentation resistance properties are determined through this experimental method. Fragmentation property data for several steels, copper, aluminum, tantalum and titanium have been obtained to date. Aspects of the dynamic data have been analyzed with computational methods to achieve a better understanding of the processes leading to failure and fragmentation, and to test an existing computational fragmentation model.

  12. The role of sulfur and sulfur isotope dilution analysis in quantitative protein analysis.

    Science.gov (United States)

    Rappel, Christina; Schaumlöffel, Dirk

    2008-01-01

    The element sulfur is almost omnipresent in all natural proteomes and plays a key role in protein quantification. Incorporated in the amino acids cysteine and methionine, it has been served as target for many protein-labeling reactions in classic quantitative proteomic approaches based on electrospray or MALDI mass spectrometry. This critical review discusses the potential and limitations of sulfur isotope dilution analysis (IDA) by inductively coupled plasma-mass spectrometry (ICP-MS) for absolute protein quantification. The development of this approach was made possible due to the improved sensitivity and accuracy of sulfur isotope ratio measurement by ICP-MS in recent years. The unique feature of ICP-MS, compound-independent ionization, enables compound (species)-unspecific sulfur IDA. This has the main advantage that only one generic sulfur standard (i.e., one isotopically labeled sulfur spike) is required to quantify each peptide or protein in a sample provided that they are completely separated in chromatography or electrophoresis and that their identities are known. The principles of this approach are illustrated with selected examples from the literature. The discussion includes also related fields of P/S and metal/S ratio measurements for the determination of phosphorylation degrees of proteins and stoichiometries in metalloproteins, respectively. Emerging new areas and future trends such as protein derivatization with metal tags for improved sensitivity of protein detection in ICP-MS are discussed.

  13. Effects of Sulfurization Temperature on Properties of CZTS Films by Vacuum Evaporation and Sulfurization Method

    Directory of Open Access Journals (Sweden)

    Jie Zhang

    2013-01-01

    Full Text Available Copper zinc tin sulfur (CZTS thin films have been extensively studied in recent years for their advantages of low cost, high absorption coefficient (≥104 cm−1, appropriate band gap (~1.5 eV, and nontoxicity. CZTS thin films are promising materials of solar cells like copper indium gallium selenide (CIGS. In this work, CZTS thin films were prepared on glass substrates by vacuum evaporation and sulfurization method. Sn/Cu/ZnS (CZT precursors were deposited by thermal evaporation and then sulfurized in N2 + H2S atmosphere at temperatures of 360–560°C to produce polycrystalline CZTS thin films. It is found that there are some impurity phases in the thin films with the sulfurization temperature less than 500°C, and the crystallite size of CZTS is quite small. With the further increase of the sulfurization temperature, the obtained thin films exhibit preferred (112 orientation with larger crystallite size and higher density. When the sulfurization temperature is 500°C, the band gap energy, resistivity, carrier concentration, and mobility of the CZTS thin films are 1.49 eV, 9.37 Ω · cm, 1.714×1017 cm−3, and 3.89 cm2/(V · s, respectively. Therefore, the prepared CZTS thin films are suitable for absorbers of solar cells.

  14. Preparation and electrochemical performance of sulfur-alumina cathode material for lithium-sulfur batteries

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Kang [Faculty of Material Science and Chemistry, China University of Geosciences, 388 Lumo Road, 430074 Wuhan (China); Wang, Shengping, E-mail: spwang@cug.edu.cn [Faculty of Material Science and Chemistry, China University of Geosciences, 388 Lumo Road, 430074 Wuhan (China); Zhang, Hanyu; Wu, Jinping [Faculty of Material Science and Chemistry, China University of Geosciences, 388 Lumo Road, 430074 Wuhan (China)

    2013-06-01

    Highlights: ► Micron-sized alumina was synthesized as adsorbent for lithium-sulfur batteries. ► Sulfur-alumina material was synthesized via crystallizing nucleation. ► The Al{sub 2}O{sub 3} can provide surface area for the deposition of Li{sub 2}S and Li{sub 2}S{sub 2}. ► The discharge capacity of the battery is improved during the first several cycles. - Abstract: Nano-sized sulfur particles exhibiting good adhesion with conducting acetylene black and alumina composite materials were synthesized by means of an evaporated solvent and a concentrated crystallization method for use as the cathodes of lithium-sulfur batteries. The composites were characterized and examined by X-ray diffraction, environmental scanning electron microscopy and electrochemical methods, such as cyclic voltammetry, electrical impedance spectroscopy and charge–discharge tests. Micron-sized flaky alumina was employed as an adsorbent for the cathode material. The initial discharge capacity of the cathode with the added alumina was 1171 mAh g{sup −1}, and the remaining capacity was 585 mAh g{sup −1} after 50 cycles at 0.25 mA cm{sup −2}. Compared with bare sulfur electrodes, the electrodes containing alumina showed an obviously superior cycle performance, confirming that alumina can contribute to reducing the dissolution of polysulfides into electrolytes during the sulfur charge–discharge process.

  15. Hydrolysis of Sulfur Dioxide in Small Clusters of Sulfuric Acid: Mechanistic and Kinetic Study.

    Science.gov (United States)

    Liu, Jingjing; Fang, Sheng; Wang, Zhixiu; Yi, Wencai; Tao, Fu-Ming; Liu, Jing-Yao

    2015-11-17

    The deposition and hydrolysis reaction of SO2 + H2O in small clusters of sulfuric acid and water are studied by theoretical calculations of the molecular clusters SO2-(H2SO4)n-(H2O)m (m = 1,2; n = 1,2). Sulfuric acid exhibits a dramatic catalytic effect on the hydrolysis reaction of SO2 as it lowers the energy barrier by over 20 kcal/mol. The reaction with monohydrated sulfuric acid (SO2 + H2O + H2SO4 - H2O) has the lowest energy barrier of 3.83 kcal/mol, in which the cluster H2SO4-(H2O)2 forms initially at the entrance channel. The energy barriers for the three hydrolysis reactions are in the order SO2 + (H2SO4)-H2O > SO2 + (H2SO4)2-H2O > SO2 + H2SO4-H2O. Furthermore, sulfurous acid is more strongly bonded to the hydrated sulfuric acid (or dimer) clusters than the corresponding reactant (monohydrated SO2). Consequently, sulfuric acid promotes the hydrolysis of SO2 both kinetically and thermodynamically. Kinetics simulations have been performed to study the importance of these reactions in the reduction of atmospheric SO2. The results will give a new insight on how the pre-existing aerosols catalyze the hydrolysis of SO2, leading to the formation and growth of new particles.

  16. Oligo-dT anchored cDNA-SCoT: a novel differential display method for analyzing differential gene expression in response to several stress treatments in mango (Mangifera indica L.).

    Science.gov (United States)

    Luo, Cong; He, Xin-Hua; Hu, Ying; Yu, Hai-xia; Ou, Shi-Jin; Fang, Zhong-Bin

    2014-09-15

    Differential display is a powerful technique for analyzing differences in gene expression. Oligo-dT cDNAstart codon targeted marker (cDNA-SCoT) technique is a novel, simple, cheap, rapid, and efficient method for differential gene expression research. In the present study, the oligo-dT anchored cDNA-SCoT technique was exploited to identify differentially expressed genes during several stress treatments in mango. A total of 37 primers combined with oligo-dT anchor primers 3side amplified approximately 150 fragments of 150 bp to 1500 bp in length. Up to 100 fragments were differentially expressed among the stress treatments and control samples, among which 92 were obtained and sequenced. Out of the 92 transcript derived fragments (TDFs), 70% were highly homologous to known genes, and 30% encoded unclassified proteins with unknown functions. The expression pattern of nine genes with known functions involved in several abiotic stresses in other species was confirmed by quantitative reverse transcription polymerase chain reaction (qRT-PCR) under cold (4 °C), salinity (NaCl), polyethylene glycol (PEG, MW 6000), and heavy metal treatments in leaves and stems at different time points (0, 24, 48, and 72 h). The expression patterns of the genes (TDF4, TDF7, TDF23, TDF45, TDF49, TDF50, TDF57, TDF91 and TDF92) that had direct or indirect relationships with cold, salinity, drought and heavy metal stress response were analyzed through qRT-PCR. The possible roles of these genes are discussed. This study suggests that the oligo-dT anchored cDNA-SCoT differential display method is a useful tool to serve as an initial step for characterizing transcriptional changes induced by abiotic stresses and provide gene information for further study and application in genetic improvement and breeding in mango. Copyright © 2014 Elsevier B.V. All rights reserved.

  17. Enhancement of polar anchoring strength in a graphene-nematic suspension and its effect on nematic electro-optic switching

    Science.gov (United States)

    Basu, Rajratan

    2017-07-01

    A small quantity of monolayer graphene flakes is doped in a nematic liquid crystal (LC), and the effective polar anchoring strength coefficient between the LC and the alignment substrate is found to increase by an order of magnitude. The hexagonal pattern of graphene can interact with the LC's benzene rings via π -π electron stacking, enabling the LC to anchor to the graphene surface homogeneously (i.e., planar anchoring). When the LC cell is filled with the graphene-doped LC, some graphene flakes are preferentially attached to the alignment layer and modify the substrate's anchoring property. These spontaneously deposited graphene flakes promote planar anchoring at the substrate and the polar anchoring energy at alignment layer is enhanced significantly. The enhanced anchoring energy is found to impact favorably on the electro-optic response of the LC. Additional studies reveal that the nematic electro-optic switching is significantly faster in the LC-graphene hybrid than that of the pure LC.

  18. Fragment Size Distribution of Blasted Rock Mass

    Science.gov (United States)

    Jug, Jasmin; Strelec, Stjepan; Gazdek, Mario; Kavur, Boris

    2017-12-01

    Rock mass is a heterogeneous material, and the heterogeneity of rock causes sizes distribution of fragmented rocks in blasting. Prediction of blasted rock mass fragmentation has a significant role in the overall economics of opencast mines. Blasting as primary fragmentation can significantly decrease the cost of loading, transport, crushing and milling operations. Blast fragmentation chiefly depends on the specific blast design (geometry of blast holes drilling, the quantity and class of explosive, the blasting form, the timing and partition, etc.) and on the properties of the rock mass (including the uniaxial compressive strength, the rock mass elastic Young modulus, the rock discontinuity characteristics and the rock density). Prediction and processing of blasting results researchers can accomplish by a variety of existing software’s and models, one of them is the Kuz-Ram model, which is possibly the most widely used approach to estimating fragmentation from blasting. This paper shows the estimation of fragmentation using the "SB" program, which was created by the authors. Mentioned program includes the Kuz-Ram model. Models of fragmentation are confirmed and calibrated by comparing the estimated fragmentation with actual post-blast fragmentation from image processing techniques. In this study, the Kuz-Ram fragmentation model has been used for an open-pit limestone quarry in Dalmatia, southern Croatia. The resulting calibrated value of the rock factor enables the quality prognosis of fragmentation in further blasting works, with changed drilling geometry and blast design parameters. It also facilitates simulation in the program to optimize blasting works and get the desired fragmentations of the blasted rock mass.

  19. MAIL1 is essential for development of the primary root but not of anchor roots.

    Science.gov (United States)

    Ühlken, Christine; Hoth, Stefan; Weingartner, Magdalena

    2014-01-01

    MAIN-LIKE1 (MAIL1) is a ubiquitously expressed nuclear protein, which has a crucial function during root development. We have recently described loss of function mutants for MAIL1, in which the organization and function of the primary root meristem is lost soon after germination. Moreover cell differentiation is impaired resulting in primary root growth arrest soon after emergence. Here we show that mail1 mutants form several anchor roots from the hypocotyl to root junction. These anchor roots show similar defects in the organization of the stem cell niche as the primary root. In contrast, differentiation processes are not impaired and thus anchor roots seem to be able to compensate for the loss of primary root function. Our data show that MAIL1 is essential for specification of cell fate in the primary root but not in anchor roots.

  20. 48 CFR 225.7007 - Restrictions on anchor and mooring chain.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Restrictions on anchor and mooring chain. 225.7007 Section 225.7007 Federal Acquisition Regulations System DEFENSE ACQUISITION... mooring chain. ...

  1. Investigation into the behaviour of concrete anchored diaphragm walls under earthquake condition

    International Nuclear Information System (INIS)

    Saba, H. R.; Rahaii, A. R.

    2003-01-01

    Diaphragm walls are frequently used in civil Engineering projects. Considering the variety and important volume of consumed materials (concrete, anchors and soil), one of the important factors for design and construction of these walls, are their behaviour under different executive, and loading conditions. In this paper, various models of concrete diaphragms with different number of anchors and soil parameters under static and dynamic loading have been investigated using finite element method with nonlinear models. Results including the internal forces in diaphragm walls, variation of forces in the anchors, shape of the sliding surface and variation of pressure in soil are obtained and compared. An experimental tool with suitable measurement systems for determining the pressure and internal forces was designed and realised. Also with similitude and dimensional analyses, diaphragms with different number of anchors were built and set on the shaking table test and experimented under different accelograms. Finally results of nonlinear dynamic analysis were compared with experimental results

  2. Suture slippage in knotless suture anchors resulting in subacromial-subdeltoid bursitis.

    Science.gov (United States)

    Hayeri, Mohammad Reza; Keefe, Daniel T; Chang, Eric Y

    2016-05-01

    Rotator cuff repair using a suture bridge and knotless suture anchors is a relatively new, but increasingly used technique. The suture bridge technique creates an anatomically similar and more secure rotator cuff repair compared with conventional arthroscopic techniques and the use of knotless anchors eliminates the challenges associated with knot tying during arthroscopic surgery. However, previous in vitro biomechanical tests have shown that the hold of the suture in a knotless suture anchor is far lower than the pullout strength of the anchor from bone. Up until now slippage has been a theoretical concern. We present a prospectively diagnosed case of in vivo suture loosening after rotator cuff repair using a knotless bridge technique resulting in subacromial-subdeltoid bursitis.

  3. Retractable Robotic Anchor for Hard Rock and Granular Soils, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — ProtoInnovations proposes to research, develop, and validate an innovative retractable robotic anchoring mechanism that works both in hard rock and granular soils...

  4. Inflation targeting and the anchoring of inflation expectations in the CEE countries

    Directory of Open Access Journals (Sweden)

    Nedeljković Milan

    2017-01-01

    Full Text Available This paper studies the time evolution in the degree and level of anchoring of inflation expectations in four Central and Eastern European inflation targeting countries. The results suggest that the degree of anchoring of inflation expectations increased gradually in all countries over the last decade, while the level of implied inflation targets moved towards the official target. The extent of anchoring increased more strongly in the first years following the IT adoption and more gradually over the later period. We also find that smooth changes of the official target had a positive impact on anchoring. [Project of the Serbian Ministry of Education, Science and Technological Development, Grant no. 47028: Advancing Serbia’s Competitiveness in the Process of EU Accession

  5. The stability and functional properties of proteoliposomes mixed with dextran derivatives bearing hydrophobic anchor groups

    NARCIS (Netherlands)

    Elferink, Marieke G.L.; Wit, Janny G. de; Veld, Gerda in 't; Reichert, Anke; Driessen, Arnold J.M.; Ringsdorf, Helmut; Konings, Wilhelmus

    1992-01-01

    Liposomes composed of Escherichia coli phospholipid were coated with polysaccharides bearing hydrophobic palmitoyl anchors. The effect on the stability of liposomes without or with integral membrane proteins was investigated. A high concentration of hydrophobized dextrans protected the liposomes

  6. Mechanical Analysis of Stress Distribution in a Carbon Fiber-Reinforced Polymer Rod Bonding Anchor

    Directory of Open Access Journals (Sweden)

    Peng Feng

    2014-04-01

    Full Text Available This paper presents an elastic shear stress distribution theoretical model at the carbon fiber-reinforced polymer (CFRP-adhesive interface of a single-rod and a multi-rod straight-pipe bonding anchor. A comparison between theoretical and finite element analysis results reveals that the accuracy of the theory can be used to guide the preliminary design of CFRP rod bonding anchors. The mechanical performance of the inner cone bonding anchor for multi-rods are evaluated within different coefficients of friction and inner inclined angles. Numerical results indicate that the straight-parabolic inner cone bonding anchor has a significant effect on reducing the shear force at the loading end.

  7. Two novel self-assemblies of supramolecular solar cells using N-heterocyclic-anchoring porphyrins

    Science.gov (United States)

    Zhang, Qian; Wu, Fang-Yuan; Liu, Jia-Cheng; Li, Ren-Zhi; Jin, Neng-Zhi

    2018-02-01

    Two novel N-substituted anchoring porphyrins (ZnPAtz and ZnPAim) have been devised and synthesized. Moreover, these two anchoring porphyrins were linked to the TiO2 semiconductor through carboxyl groups and then a zinc porphyrin ZnP was bound to the anchoring porphyrin using a zinc-to-ligand axial coordination approach. The different performances of these assemblies were compared with single anchoring porphyrin devices ZnPAtz and ZnPAim. The photoelectric conversion efficiency of the new supramolecular solar cells sensitized by ZnP-ZnPAx (x = tz, im) has been improved. The ZnP-ZnPAtz-based DSSCs provided the highest photovoltaic efficiency (1.86%). Fundamental studies showed that incorporation of these assemblies promote light-harvesting efficiency.

  8. Effects of an Anchoring Configuration on the Static Response of Geotextile and Geogrid Fabrics

    National Research Council Canada - National Science Library

    Simmons, Lebron

    2000-01-01

    An investigation is made of a potential retrofit system for in-fill masonry walls subjected to blast effects that consist of geotextile or geogrid materials anchored to the roof, floor slabs and beams...

  9. Stone anchors from Bet Dwarka Island, Gujarat, Coast, India: Significance to historical period maritime activities

    Digital Repository Service at National Institute of Oceanography (India)

    Sundaresh; Gaur, A.S.; Tripati, S.; Gudigar, P.; Bandodkar, S.N.

    Bet Dwarka Island is situated on the extreme west of Indian territory in Jamnagar district of Gujarat. Underwater, the most preserved remains of ancient maritime activity could be the stone anchors of different types, as every boat requires...

  10. Benefit and quality of life in older bone-anchored hearing aid users.

    NARCIS (Netherlands)

    Wolf, M.J.F. de; Shival, M.L.; Hol, M.K.S.; Mylanus, E.A.M.; Cremers, C.W.R.J.; Snik, A.F.M.

    2010-01-01

    OBJECTIVE: Benefit and quality-of-life analysis in the older adult bone-anchored hearing aid (BAHA) users. STUDY DESIGN: Retrospective evaluation. METHODS: Four questionnaires (Glasgow Benefit Inventory, Abbreviated Profile of Hearing Aid Benefit [APHAB], Nijmegen Cochlear Implant Questionnaire

  11. HSV1 MicroRNA Modulation of GPI Anchoring and Downstream Immune Evasion

    Directory of Open Access Journals (Sweden)

    Jonatan Enk

    2016-10-01

    Full Text Available Herpes simplex virus 1 (HSV1 is a ubiquitous human pathogen that utilizes variable mechanisms to evade immune surveillance. The glycosylphosphatidylinositol (GPI anchoring pathway is a multistep process in which a myriad of different proteins are covalently attached to a GPI moiety to be presented on the cell surface. Among the different GPI-anchored proteins there are many with immunological importance. We present evidence that the HSV1-encoded miR H8 directly targets PIGT, a member of the protein complex that covalently attaches proteins to GPI in the final step of GPI anchoring. This results in a membrane down-modulation of several different immune-related, GPI-anchored proteins, including ligands for natural killer-activating receptors and the prominent viral restriction factor tetherin. Thus, we suggest that by utilizing just one of dozens of miRNAs encoded by HSV1, the virus can counteract the host immune response at several key points.

  12. Gluon fragmentation in T(1S) decays

    International Nuclear Information System (INIS)

    Bienlein, J.K.

    1983-05-01

    In T(1S) decays most observables (sphericity, charged multiplicity, photonic energy fraction, inclusive spectra) can be understood assuming that gluons fragment like quarks. New results from LENA use the (axis-independent) Fox-Wolfram moments for the photonic energy deposition. Continuum reactions show 'standard' Field-Feynman fragmentation. T(1S) decays show a significant difference in the photonic energy topology. It is more isotropic than with the Field-Feynman fragmentation scheme. Gluon fragmentation into isoscalar mesons (a la Peterson and Walsh) is excluded. But if one forces the leading particle to be isoscalar, one gets good agreement with the data. (orig.)

  13. Measuring the temperature of hot nuclear fragments

    International Nuclear Information System (INIS)

    Wuenschel, S.; Bonasera, A.; May, L.W.; Souliotis, G.A.; Tripathi, R.; Galanopoulos, S.; Kohley, Z.; Hagel, K.; Shetty, D.V.; Huseman, K.; Soisson, S.N.; Stein, B.C.; Yennello, S.J.

    2010-01-01

    A new thermometer based on fragment momentum fluctuations is presented. This thermometer exhibited residual contamination from the collective motion of the fragments along the beam axis. For this reason, the transverse direction has been explored. Additionally, a mass dependence was observed for this thermometer. This mass dependence may be the result of the Fermi momentum of nucleons or the different properties of the fragments (binding energy, spin, etc.) which might be more sensitive to different densities and temperatures of the exploding fragments. We expect some of these aspects to be smaller for protons (and/or neutrons); consequently, the proton transverse momentum fluctuations were used to investigate the temperature dependence of the source.

  14. Archaeometallurgical investigation of the iron anchor from the Tantura F shipwreck

    Energy Technology Data Exchange (ETDEWEB)

    Aronson, A. [Faculty of Engineering, Tel Aviv University, Ramat Aviv 69978 (Israel); Ashkenazi, D., E-mail: dana@eng.tau.ac.il [Faculty of Engineering, Tel Aviv University, Ramat Aviv 69978 (Israel); Barkai, O.; Kahanov, Y. [Leon Recanati Institute for Maritime Studies, University of Haifa, Haifa 31905 (Israel)

    2013-04-15

    The Tantura F shipwreck was a coaster or a fishing vessel about 15.7 m long, discovered in the Dor/Tantura lagoon, Israel in 1995. It was dated to between the mid-7th and the end of the 8th centuries CE. Among the finds excavated were two T-shaped type iron anchors. Of the two anchors, one (anchor A) was thoroughly studied by archaeometallurgical methods in order to identify forge-welding lines, to determine the welding quality and to understand the manufacturing technology. The examinations included X-ray radiography, XRF analysis, optical microscopy, SEM/EDS observation and analysis, OES analysis and microhardness tests. The investigation included characterization of the composition, microstructure, thermal treatments, forge-welding junctions and slag analysis. The results revealed a heterogeneous microstructure, rich in glassy, fayalite and wüstite slag. Iron based phases included ferrite, pearlite, cementite and Widmanstätten plates, all typical to wrought iron. The forge-welds of Anchor A were located. Each arm was made of one piece, weighing about 2.5–3 kg and the shank was made of a few 1.5–2 kg pieces. The second anchor (anchor B) was only briefly examined visually and with a few radiographs, which support the results from anchor A. The research results revealed significant information about T-shaped anchors and their manufacturing process, including hot-working processes without any additional heat treatments, and folding techniques. The microstructure was similar to other ancient simple tools such as saws, sickles, axes and mortise chisels, and though the technology to make complicated structures and objects, such as swords, existed at that time, the anchors did not require this sophistication; thus simpler techniques were used, presumably because they were more cost-effective. - Highlights: ► Tantura F was a coaster dated to mid-7th–end-8th centuries. ► Two iron anchors were discovered at the Tantura F shipwreck-site. ► Anchor A was

  15. Molecular Interaction of Pinic Acid with Sulfuric Acid

    DEFF Research Database (Denmark)

    Elm, Jonas; Kurten, Theo; Bilde, Merete

    2014-01-01

    from the corresponding ΔG values. The first two additions of sulfuric acid to pinic acid are found to be favorable with ΔG values of -9.06 and -10.41 kcal/mol. Addition of a third sulfuric acid molecule is less favorable and leads to a structural rearrangement forming a bridged sulfuric acid-pinic acid...... without the further possibility for attachment of either sulfuric acid or pinic acid. This suggests that pinic acid cannot be a key species in the first steps in nucleation, but the favorable interactions between sulfuric acid and pinic acid imply that pinic acid can contribute to the subsequent growth...

  16. Method to prevent sulfur accumulation in membrane electrode assembly

    Science.gov (United States)

    Steimke, John L; Steeper, Timothy J; Herman, David T

    2014-04-29

    A method of operating a hybrid sulfur electrolyzer to generate hydrogen is provided that includes the steps of providing an anolyte with a concentration of sulfur dioxide, and applying a current. During steady state generation of hydrogen a plot of applied current density versus concentration of sulfur dioxide is below a boundary line. The boundary line may be linear and extend through the origin of the graph with a slope of 0.001 in which the current density is measured in mA/cm2 and the concentration of sulfur dioxide is measured in moles of sulfur dioxide per liter of anolyte.

  17. Experiments on contrail formation from fuels with different sulfur content

    Energy Technology Data Exchange (ETDEWEB)

    Busen, R.; Kuhn, M.; Petzold, A.; Schroeder, F.; Schumann, U. [Deutsche Forschungs- und Versuchsanstalt fuer Luft- und Raumfahrt e.V., Oberpfaffenhofen (Germany); Baumgardner, D. [National Center for Atmospheric Research, Boulder, CO (United States); Borrmann, S. [Mainz Univ. (Germany); Hagen, D.; Whitefield, Ph. [Missouri Univ., Rolla, MO (United States). Bureau of Mines; Stroem, J. [Stockholm Univ. (Sweden)

    1997-12-31

    A series of both flight tests and ground experiments has been performed to evaluate the role of the sulfur contained in kerosene in condensation trail (contrail) formation processes. The results of the first experiments are compiled briefly. The last SULFUR 4 experiment dealing with the influence of the fuel sulfur content and different appertaining conditions is described in detail. Different sulfur mass fractions lead to different particle size spectra. The number of ice particles in the contrail increases by about a factor of 2 for 3000 ppm instead of 6 ppm sulfur fuel content. (author) 10 refs.

  18. MAIL1 is essential for development of the primary root but not of anchor roots

    OpenAIRE

    Ühlken, Christine; Hoth, Stefan; Weingartner, Magdalena

    2014-01-01

    MAIN-LIKE1 (MAIL1) is a ubiquitously expressed nuclear protein, which has a crucial function during root development. We have recently described loss of function mutants for MAIL1, in which the organization and function of the primary root meristem is lost soon after germination. Moreover cell differentiation is impaired resulting in primary root growth arrest soon after emergence. Here we show that mail1 mutants form several anchor roots from the hypocotyl to root junction. These anchor root...

  19. Development of a New Nondestructive Inspection Strategy for Corroded Multistrand Anchor Cables

    Science.gov (United States)

    2016-07-01

    parking structures , rock and soil anchors, houses, and many other structures . Figure 1 (left) and (middle) show a typical cable and multistrand anchor...generally only one end of the cable is accessible. Additionally with navigation structures , the cable’s path is most often deep within the concrete, and... cables in navigational structures is to be achieved. INITIAL GUIDED WAVE INVESTIGATIONS: In the 2012 Federal Highway Works Administration report

  20. Material and welding development of anchor plates to build nuclear power plant by blue arc process

    International Nuclear Information System (INIS)

    Gibelli, C.E.

    1986-01-01

    To build nuclear power plants, anchor plates are plenty used. These anchor plates serve as a system with the purpose to fix many heavy components or a simple stair. Considering the necessity of element fabrication fastly, with reasonable economy and quality, the arc study welding process (blue arc) was used. A special development of the material concept as well as a welding procedure and a subsuppliers qualification of the raw material was necessary. (Author) [pt

  1. The affordance of anchored discussion for the collaborative processing of academic texts.

    OpenAIRE

    van der Pol, Jakko; Admiraal, W.; Simons, P.R.J.

    2006-01-01

    A system for ‘anchored discussion’ is compared with a system for traditional forum discussion (Blackboard), and their affordances for the collaborative processing of academic texts are investigated. Results show that discussion in the system for anchored discussion is directed at a processing of the meaning of the texts to a larger extent than discussion in the traditional forum, which is more oriented towards the sharing of personal opinions and experiences. This difference in orientation pr...

  2. Exploring body-anchored and experience-based learning in a community of practice

    DEFF Research Database (Denmark)

    Stelter, Reinhard

    2008-01-01

    The article aims to integrate body-anchored and experience-based learning in the theoretical concept of learning in a community of practice. Present moment, epoché, intentional orientation and meaning making are introduced as the four basic premises for body-anchored and experience-based learning...... as the outflow of speech acts, originally based on embodied and experience-based knowledge....

  3. Dynamic behaviour of anchors in cracked and uncracked concrete: a progress report

    International Nuclear Information System (INIS)

    Rodriguez, M.; Klingner, R.E.

    1997-01-01

    In early 1993, the US Nuclear Regulatory Commission began a research program at The University of Texas at Austin, dealing with the dynamic behavior of anchors in cracked and uncracked concrete. In this paper, the progress of that research program is reviewed. The test program is summarized, and work performed to date is reviewed, with emphasis on the dynamic and static behavior of single tensile anchors in uncracked concrete. General conclusions from that work are discussed, and future plans are presented. (orig.)

  4. Transient Studies of a Sodium Sulfur Cell

    Science.gov (United States)

    Caprio, Sarah

    Modern grids will include input from fossil-fueled power generation facilities as well as renewable energy sources, and these are expected to work together actively. One major problem with this integrated power production is that most renewable energy sources are intermittent and variable, and thus introduce a very challenging situation with regard to grid stability and reliability. Also, fossil-fueled power generation facilities have load cycles based on expected usage. A non-reliable power source cannot feasibly be used to supply the grid with proper amounts of energy needed in peak times. A solution to this dilemma is power storage. The sodium-sulfur battery has high potential for electrical storage at the grid level due to its high energy density, low cost of the reactants, and high open-circuit voltage. However, the use of sodium-sulfur batteries at the grid level requires high current density operation that can cause cell deterioration, leading to lower sulfur utilization and lower energy efficiency. In addition, it can result in undesired thermal runaway leading to potentially hazardous situations. A rigorous, dynamic model of a sodium-sulfur battery can be used to study these phenomena, design the battery for optimal transient performance, and develop mitigation strategies. Most literature on sodium-sulfur batteries is concerned the dynamics of the sulfur electrode (a sodium-polysulfide melt). There is limited data in the open literature for dynamics of an entire cell. With this motivation, a first-principles dynamic model of a sodium-sulfur cell (with beta"-alumina electrolyte) has been developed. The state of discharge (SOD) of a sodium-sulfur cell significantly affects the heat generation rate, rates of electrochemical reactions, and internal resistance. To capture these phenomena correctly, a fully coupled thermal-electrochemical model has been developed. The thermal model considers heat generation due to Ohmic loss, Peltier heat, and heat due to the

  5. Sulfur organic compounds in bottom sediments of the eastern Gulf of Finland.

    Science.gov (United States)

    Khoroshko, Larisa O; Petrova, Varvara N; Takhistov, Viatcheslav V; Viktorovskii, Igor V; Lahtiperä, Mirja; Paasivirta, Jaakko

    2007-09-01

    substances there. A number of sulfur organic compounds present in nineteen bottom sediment samples from the Eastern Gulf of Finland (EGF) were characterized by high performance gas chromatography connected to low and high resolution mass spectrometers (GC/LRMS and GC/HRMS). The structure screening was carried out as compared with literature and library mass spectra, and taking the GC retention times into account. In the cases of an absence of mass spectra not in the literature, interpretation of the most probable structures was performed with the help of high resolution mass-spectrometric data, fragmentation rules for sulfur-bearing organic substances and ICLU simulation of spectra. These data were registered to form a conclusive 'fingerprint' for identification and confirmation of the structure of each novel compound found, e.g. by later syntheses of authentic model compounds. The relative contents of sulfur organic compounds were determined from MS response ratios of each compound to 2-fluorine naphthalene (internal standard). This paper is a completion of work, which has been published in part as three papers in the European Journal of Mass Spectrometry. As the total study result, 43 sulfur-bearing compounds were characterized. The mass spectra of 20 of them were found in the literature. The most probable structures for the 23 compounds whose mass-spectra were not available in the literature data were proposed. All of those 23 compounds were detected in bottom sediments for the first time, and 5 of them were described as originating from plants or being generated by chemical synthesis products, while the remaining 18 substances were previously unknown. The structures of these were deduced to be most probably the following (in order of their GC retention): dichloromethyl thiylsulfenylchloride, chloromethyl dichloromethyl disulfide, 3,4-dithiacyclohexene, 1,2,4-trithiacycloheptane, 1,2,3-trithiacyclohexane, tetrathiacyclopentane, 3,4,5-trithiacyclohexene, 1

  6. Sustainable synthesis and automated deposition: an accessible discovery screening library of fragment-like purines.

    Science.gov (United States)

    Kamper, Christoph; Korpis, Katharina; Specker, Edgar; Anger, Lennart; Neuenschwander, Martin; Bednarski, Patrick J; Link, Andreas

    2012-08-01

    A sub-library of 88 information-rich lead-like purine derivatives were prepared and deposited in an open access academic screening facility. The rationale for the synthesis of these rigid low complexity structures was the privileged character of the purine heterocycle associated with its inherent probability of interactions with multiple adenine-related targets. Although generally expected to be weak binders in many assays, such fragment-like compounds are estimated to match diverse binding sites. It is suggested that heterocycles with many anchor points for hydrogen bonds can be anticipated to undergo very specific interactions to produce more negative enthalpies and thus provide superior starting points for lead optimization than compounds that owe their activity to entropic effects. The in vitro cytotoxicity of the small compounds on a panel of human cancer cell lines has been investigated and some of them showed marked unselective or selective toxicity. This data may be useful if these fragments are to be incorporated into drug-like structures via metabolically cleavable connections. The sub-library will be implemented as part of the ChemBioNet ( www.chembionet.info ) library, and it is open to screening campaigns of academic research groups striving for a fragment-based approach in their biological assays.

  7. Molecular beacon anchored onto a graphene oxide substrate

    Science.gov (United States)

    Darbandi, Arash; Datta, Debopam; Patel, Krunal; Lin, Gary; Stroscio, Michael A.; Dutta, Mitra

    2017-09-01

    In this article, we report a graphene oxide-based nanosensor incorporating semiconductor quantum dots linked to DNA-aptamers that functions as a ‘turn-off’ fluorescent nanosensor for detection of low concentrations of analytes. A specific demonstration of this turn-off aptasensor is presented for the case of the detection of mercury (II) ions. In this system, ensembles of aptamer-based quantum-dot sensors are anchored onto graphene oxide (GO) flakes which provide a platform for analyte detection in the vicinity of GO. Herein, the operation of this ensemble-based nanosensor is demonstrated for mercury ions, which upon addition of mercury, quenching of the emission intensity from the quantum dots is observed due to resonance energy transfer between quantum dots and the gold nanoparticle connected via a mercury target aptamer. A key result is that the usually dominant effect of quenching of the quantum dot due to close proximity to the GO can be reduced to negligible levels by using a linker molecule in conjunctions with the aptamer-based nanosensor. The effect of ionic concentration of the background matrix on the emission intensity was also investigated. The sensor system is found to be highly selective towards mercury and exhibits a linear behavior (r 2 > 0.99) in the nanomolar concentration range. The detection limit of the sensor towards mercury with no GO present was found to be 16.5 nM. With GO attached to molecular beacon via 14 base, 35 base, and 51 base long linker DNA, the detection limit was found to be 38.4 nM, 9.45 nM, and 11.38 nM; respectively.

  8. Study on interaction between soil and anchor chain with finite element method

    Science.gov (United States)

    Li, Sa; Xu, Bao-zhao; Wu, Yun-zhou; Li, Zhong-gang

    2016-12-01

    With the development of offshore engineering, deeply embedded anchors are needed to be penetrated to appreciable depth and attached at the pad-eye. The interaction between anchor chain and soil is a very complex process and has not been thoroughly understood yet. In this paper, the finite element method (FEM) was used to study the interaction of soil-chain system. Results of the analysis show that when the attachment point is at a shallow depth, the load-development characteristics of the chain from FEM are in good agreement with that from the model tests and theoretical analysis. But with the depth increment, the results are different obviously in different methods. This phenomenon is resulted from a variety of reasons, and the plastic zone around the chain was studied to try finding the mechanism behind it. It could be seen that the plastic zone extended in different modes at different depths of attachment points. The interaction between the soil and anchor chain makes the load acting on the anchor decrease, but the soil disturbed surrounding the chain increases the anchor failure possibility. When the anchor bearing capacity is evaluated, these two factors should be considered properly at the same time.

  9. Stability Analysis of Anchored Soil Slope Based on Finite Element Limit Equilibrium Method

    Directory of Open Access Journals (Sweden)

    Rui Zhang

    2016-01-01

    Full Text Available Under the condition of the plane strain, finite element limit equilibrium method is used to study some key problems of stability analysis for anchored slope. The definition of safe factor in slices method is generalized into FEM. The “true” stress field in the whole structure can be obtained by elastic-plastic finite element analysis. Then, the optimal search for the most dangerous sliding surface with Hooke-Jeeves optimized searching method is introduced. Three cases of stability analysis of natural slope, anchored slope with seepage, and excavation anchored slope are conducted. The differences in safety factor quantity, shape and location of slip surface, anchoring effect among slices method, finite element strength reduction method (SRM, and finite element limit equilibrium method are comparatively analyzed. The results show that the safety factor given by the FEM is greater and the unfavorable slip surface is deeper than that by the slice method. The finite element limit equilibrium method has high calculation accuracy, and to some extent the slice method underestimates the effect of anchor, and the effect of anchor is overrated in the SRM.

  10. Implant survival rate in bone-anchored hearing aid users: long-term results.

    Science.gov (United States)

    Wallberg, E; Granström, G; Tjellström, A; Stalfors, J

    2011-11-01

    To investigate the long-term survival rate of bone-anchored hearing aid implants, and to assess the number of patients who stop using their bone-anchored hearing aid. Patients who underwent bone-anchored hearing aid surgery between September 1977 and December 1986 were identified from a prospective database. Data were collected from patient records. During the study period, 143 patients were fitted with a bone-anchored hearing aid. Records from 132 patients were found, with a mean follow up of nine years. A total of 150 implants were installed in these patients. A total of 41 implants (27 per cent) were lost during follow up: 17 lost osseointegration, 16 were removed and eight were lost due to direct trauma. At the end of follow up, 119/132 (90 per cent) patients were still using their bone-anchored hearing aid. Despite a high incidence of implant loss over time, a large number of patients still continued to use their bone-anchored hearing aid.

  11. Bone-anchored hearing aids in children and young adults: the Freeman Hospital experience.

    Science.gov (United States)

    Ramakrishnan, Y; Marley, S; Leese, D; Davison, T; Johnson, I J M

    2011-02-01

    To investigate the utilisation of bone-anchored hearing aids and Softband, as well as the effects on quality of life, amongst the paediatric and young adult population of Freeman Hospital, Newcastle Upon Tyne, UK. Retrospective, anonymised, cross-sectional survey using the Glasgow Benefit Inventory and Listening Situation Questionnaire (parent version), administered at least three months following the start of bone-anchored hearing aid or Softband use. One hundred and nine patients were included, of whom syndromic children made up a significant proportion (22 of 109). Patients using bone-anchored hearing aids obtained significant educational and social benefit from their aids. The mean Listening Situation Questionnaire difficulty score was 17 (15 patients), which is below the trigger score of 22+ at which further reassessment and rehabilitation is required. 87% (of 15 patients) did not require further intervention. The overall mean GBI score for the 22 patients (syndromic and non-syndromic) was +29. The use of bone-anchored hearing aids and Softband results in significant improvements in quality of life for children and young adults with hearing impairment. There is significant under-utilisation of bone-anchored hearing aids in children with skull and congenital abnormalities, and we would advocate bone-anchored hearing aid implantation for these patients.

  12. Quality of life improvement for bone-anchored hearing aid users and their partners.

    Science.gov (United States)

    McNeil, M L; Gulliver, M; Morris, D P; Bance, M

    2011-06-01

    Bone-anchored hearing aid recipients experience well documented improvements in their audiometric performance and quality of life. While hearing aid recipients may understate their functional improvement, their partners may be more aware of such improvement. We sought to investigate patients' partners' perceptions of functional improvement following bone-anchored hearing aid fitting. Surveys were sent to 153 patients who had received a bone-anchored hearing aid through the Nova Scotia bone-anchored hearing aid programme. The validated survey asked patients' partners to give their subjective impression of the bone-anchored hearing aid recipient's functional status. Surveys were completed by 90 patients (58.8 per cent), of whom 72 reported having a partner. Partners reported a significant improvement in hearing (p ≤ 0.0001). Partners reported improvement in 87.0 per cent of functional scenarios, no change in 12.6 per cent, and a decline in 0.4 per cent. These findings demonstrate a significant improvement in the emotional and social effects of hearing impairment, as perceived by bone-anchored hearing aid recipients' partners.

  13. Patient quality of life with bone-anchored hearing aid: 10-year experience in Glasgow, Scotland.

    Science.gov (United States)

    Mace, A T M; Isa, A; Cooke, L D

    2009-09-01

    This study aimed to ascertain the usefulness of the bone-anchored hearing aid and its impact on the quality of life of patients fitted in Glasgow between 1996 and 2006. The Entific Medical Systems questionnaire and the Glasgow Benefit Inventory were posted to patients in order to assess their satisfaction and quality of life changes. Sixty adult patients were identified, with a questionnaire response rate of 63 per cent. Thirty-two respondents (85 per cent) reported using their bone-anchored hearing aid for more than eight hours per day. Twenty-nine respondents (75 per cent) found their bone-anchored hearing aid to be generally better than their previous, conventional aid. Twenty-seven respondents (71 per cent) reported that their bone-anchored hearing aid improved their quality of life. The median total Glasgow Benefit Inventory score was +33.3. Bone-anchored hearing aid usage rates and satisfaction levels were high amongst patients in Glasgow. Glasgow Benefit Inventory indices were comparable to published findings from other centres. Despite this, bone-anchored hearing aid funding is still not universally available within the National Health Service in Scotland.

  14. Management of repeated trauma to bone-anchored hearing aids in a paediatric patient.

    Science.gov (United States)

    Shamil, E; Topsakal, V; Grolman, W

    2013-02-01

    To outline the management options and neurological complications associated with repeated traumatic falls that cause intrusion of bone-anchored hearing aid abutments. A three-year-old boy with coloboma, heart defects, atresia of nasal choanae, retarded growth, genital abnormalities, ear defects and deafness was fitted with a bone-anchored hearing aid for severe conductive hearing loss and congenital ear malformations. Six months later, a traumatic fall caused an intrusion injury which rendered the bone-anchored hearing aid abutment unusable. Without removing the original abutment, a second abutment was inserted on the same side to aid his hearing. Two years later, the child fell again and damaged his second bone-anchored hearing aid abutment. Having been offered a surgical option to repair the area, the parents opted to keep the abutments in situ. Direct trauma to the fixture of a bone-anchored hearing aid is a relatively common long-term complication in children which can disrupt osseointegration and disable the implant. For young children who are either prone to falling or have behavioural problems, a bone-anchored hearing aid Softband may be more appropriate to non-invasively aid hearing.

  15. Bioabsorbable Suture Anchor Migration to the Acromioclavicular Joint: How Far Can These Implants Go?

    Directory of Open Access Journals (Sweden)

    Giovanna Medina

    2014-01-01

    Full Text Available Few complications regarding the use of bioabsorbable suture anchors in the shoulder have been reported. What motivated this case report was the unusual location of the anchor, found in the acromioclavicular joint which, to our knowledge, has never been reported so far. A 53-year old male with previous rotator cuff (RC repair using bioabsorbable suture anchors presented with pain and weakness after 2 years of surgery. A suspicion of retear of the RC led to request of a magnetic resonance image, in which the implant was found located in the acromioclavicular joint. The complications reported with the use of metallic implants around the shoulder led to the development of bioabsorbable anchors. Advantages are their absorption over time, minimizing the risk of migration or interference with revision surgery, less artifacts with magnetic resonance imaging, and tendon-to-bone repair strength similar to metallic anchors. Since the use of bioabsorbable suture anchors is increasing, it is important to know the possible complications associated with these devices.

  16. A REVIEW OF THE DRIVE OPTIONS FOR OFFSHORE ANCHOR HANDLING WINCHES

    Directory of Open Access Journals (Sweden)

    Miguel Lamas Pardo

    2017-01-01

    Full Text Available This article discusses the state of the art for driving technologies of anchor handling winches for offshore operations. These systems are necessary for anchor handling operations associated with installation of many types of moored floating offshore structures. To perform these operations, it is necessary to use specialized vessels known as AHT (Anchor Handling Tug or AHTS (Anchor Handling Tug Supply vessel, which incorporate specific equipment such as towing winches, but with higher performance than conventional tugs both in size and in technical performance. There are nowadays two main options for driving the Anchor Handling/Towing winches: hydraulic with low or high pressure motors, and electrical with AC motors driven by Variable Frequency Drives. Additionally, a new technology is appearing in the industrial sector which is starting to be applied in the marine sector, and in some cases for anchor handing winches: the permanent magnet motor. The aim of this paper is to discuss these driving technologies and their importance in the future of this part of the marine sector.

  17. Sulfur containing nanoporous materials, nanoparticles, methods and applications

    Energy Technology Data Exchange (ETDEWEB)

    Archer, Lynden A.; Navaneedhakrishnan, Jayaprakash

    2018-01-30

    Sulfur containing nanoparticles that may be used within cathode electrodes within lithium ion batteries include in a first instance porous carbon shape materials (i.e., either nanoparticle shapes or "bulk" shapes that are subsequently ground to nanoparticle shapes) that are infused with a sulfur material. A synthetic route to these carbon and sulfur containing nanoparticles may use a template nanoparticle to form a hollow carbon shape shell, and subsequent dissolution of the template nanoparticle prior to infusion of the hollow carbon shape shell with a sulfur material. Sulfur infusion into other porous carbon shapes that are not hollow is also contemplated. A second type of sulfur containing nanoparticle includes a metal oxide material core upon which is located a shell layer that includes a vulcanized polymultiene polymer material and ion conducting polymer material. The foregoing sulfur containing nanoparticle materials provide the electrodes and lithium ion batteries with enhanced performance.

  18. Sulfur turnover and emissions during storage of cattle slurry

    DEFF Research Database (Denmark)

    Eriksen, Jørgen; Andersen, Astrid J; Poulsen, Henrik Vestergaard

    2012-01-01

    Slurry acidification using sulfuric acid reduces ammonia emissions but also affects sulfur (S) cycling. Emission of sulfur is a source of malodor and reduces the sulfur fertilizer value of the slurry. We investigated the effect of sulfate and methionine amendments, alone or in combination...... of the compounds in fresh or aged slurry. Generally, addition of a sulfate increased the contribution from H2S dramatically, whereas acidification lowered the H2S contribution but increased that of MT. Thus, acidification of slurry with sulfuric acid may potentially produce more odor from S compounds than...... with acidification, on sulfur transformations in slurry and emissions of volatile sulfur compounds (VSC) during storage of fresh and aged cattle slurry. When pH was lowered to 5.5 it resulted in an almost complete inhibition of sulfate reduction. There was a huge emission of hydrogen sulfide (H2S) with addition...

  19. Measurement of longitudinal sulfur isotopic variations by laser ablation MC-ICP-MS in single human hair strands.

    Science.gov (United States)

    Santamaria-Fernandez, Rebeca; Giner Martínez-Sierra, Justo; Marchante-Gayón, J M; García-Alonso, J Ignacio; Hearn, Ruth

    2009-05-01

    A new method for the measurement of longitudinal variations of sulfur isotope amount ratios in single hair strands using a laser ablation system coupled to a multicollector inductively coupled plasma mass spectrometer (LA-MC-ICP-MS) is reported here for the first time. Ablation parameters have been optimized for the measurement of sulfur isotope ratios in scalp human hair strands of 80-120-microm thickness and different washing procedures have been evaluated. The repeatability of the method has been tested and the ability to measure sulfur isotopic variations in 1,000-microm-long hair segments has been evaluated. A horse hair sample previously characterized for carbon and nitrogen isotope ratios in an interlaboratory study has been characterized by LA-MC-ICP-MS to be used as an in-house standard for the bracketing of human hair strands. (34)S/(32)S isotope amount ratios have been measured and corrected for instrumental mass bias adopting the external standardization approach using National Institute of Standards and Technology (NIST) RM8553 and full uncertainty budgets have been calculated using the Kragten approach. Results are reported as both (34)S/(32)S isotope amount ratios and deltaS(V-CDT) values (sulfur isotopic differences relative to a reference sample expressed in the Vienna Canyon Diablo Troilite (V-CDT) scale) calculated using NIST RM8553, NIST RM8554, and NIST RM8556 to anchor results to the V-CDT scale. The main advantage of the new method versus conventional gas source isotope ratio mass spectrometry measurements is that longitudinal variations in sulfur isotope amount ratios can be resolved. Proof of concept is shown with human scalp hair strands from three individuals, two UK residents and one traveler (long periods of time abroad). The method enables monitoring of longitudinal isotope ratio variations in single hair strands. Absolute ratios are reported and delta(34)S(V-CDT) values are plotted for comparison. Slight variations of 5 per thousand

  20. Biogeochemical Cycling of Sulfur in Soil

    Science.gov (United States)

    Lehmann, J.; Solomon, D.; Janzen, H.; Amelung, W.; Lobe, I.; Martinez, C. E.; Dupreez, C.; Machado, S.

    2002-12-01

    Sulfur is an important element of the global biogeochemical cycle, since it is highly reactive and moves freely among the lithosphere, atmosphere and hydrosphere. Climatic and environmental changes affecting sulfur in the pedosphere will inevitably change the rate and forms of global sulfur cycling which are intertwined with that of carbon, nitrogen and phosphorus. In soil, inorganic sulfur derived from atmospheric deposition or fertilization is largely immobilized and incorporated into soil organic matter (>95%). During the last decades, however, these emissions have been significantly reduced in North America and Europe, and S deficiency can increasingly be observed in crops. This process was accelerated by a change to low-S-containing fertilizers. Therefore, we studied the long-term dynamics of S forms in relation to organic C to evaluate its impact on the soil cycle. Synchrotron-based sulfur K-edge X-ray Absorption Near-Edge Structure spectroscopy (XANES) was used to speciate and quantify the different oxidation states of soil sulfur (organic and inorganic forms of S). Direct measurement of S species in bulk soil indicated the presence of large background on the spectra, which could not easily be corrected without affecting the results. However, humic acid extractions using 0.1 M NaOH/0.4 M NaF mixtures produced better signals, which can even be improved by additional filtration using a 0.2mm membrane filter under pressure. Traditional wet chemical analyses of soil S using hydriodic acid (HI) reduction showed that the major proportion (98%) of total S was present in organic forms, out of which 77-84% were C-bonded S, whereas ester SO4 -S constituted merely 16-23% of the organic S pool in bulk soils. These values were constant regardless of major soil disturbances by landuse and did not change between different particle size fractions. S-XANES spectroscopy, however, showed clear differences of S oxidation states after environmental disturbance of soil and

  1. Gas-Phase Fragmentation Behavior of Oxidized Prenyl Peptides by CID and ETD Tandem Mass Spectrometry

    Science.gov (United States)

    Bhawal, Ruchika P.; Shahinuzzaman, A. D. A.; Chowdhury, Saiful M.

    2017-04-01

    Farnesylation and geranylgeranylation are the two types of prenyl modification of proteins. Prenylated peptides are highly hydrophobic and their abundances in biological samples are low. In this report, we studied the oxidized prenylated peptides by electrospray ionization mass spectrometry and identified them by collision-induced dissociation (CID) and electron-transfer dissociation (ETD) tandem mass spectrometry. Modified prenyl peptides were generated utilizing strong and low strength oxidizing agents to selectively oxidize and epoxidize cysteine sulfur and prenyl side chain. We selected three peptides with prenyl motifs and synthesized their prenylated versions. The detailed characteristic fragmentations of oxidized and epoxidized farnesylated and geranylgeranylated peptides were studied side by side with two popular fragmentation techniques. CID and ETD mass spectrometry clearly distinguished the modified version of these peptides. ETD mass spectrometry provided sequence information of the highly labile modified prenyl peptides and showed different characteristic fragmentations compared with CID. A detailed fragmentation of modified geranylgeranylated peptides was compared by CID and ETD mass spectrometry for the first time.

  2. A tail-anchored myotonic dystrophy protein kinase isoform induces perinuclear clustering of mitochondria, autophagy, and apoptosis.

    Directory of Open Access Journals (Sweden)

    Ralph J A Oude Ophuis

    Full Text Available BACKGROUND: Studies on the myotonic dystrophy protein kinase (DMPK gene and gene products have thus far mainly concentrated on the fate of length mutation in the (CTGn repeat at the DNA level and consequences of repeat expansion at the RNA level in DM1 patients and disease models. Surprisingly little is known about the function of DMPK protein products. METHODOLOGY/PRINCIPAL FINDINGS: We demonstrate here that transient expression of one major protein product of the human gene, the hDMPK A isoform with a long tail anchor, results in mitochondrial fragmentation and clustering in the perinuclear region. Clustering occurred in a variety of cell types and was enhanced by an intact tubulin cytoskeleton. In addition to morphomechanical changes, hDMPK A expression induces physiological changes like loss of mitochondrial membrane potential, increased autophagy activity, and leakage of cytochrome c from the mitochondrial intermembrane space accompanied by apoptosis. Truncation analysis using YFP-hDMPK A fusion constructs revealed that the protein's tail domain was necessary and sufficient to evoke mitochondrial clustering behavior. CONCLUSION/SIGNIFICANCE: Our data suggest that the expression level of the DMPK A isoform needs to be tightly controlled in cells where the hDMPK gene is expressed. We speculate that aberrant splice isoform expression might be a codetermining factor in manifestation of specific DM1 features in patients.

  3. Mechanisms Affecting Population Density in Fragmented Habitat

    Directory of Open Access Journals (Sweden)

    Lutz Tischendorf

    2005-06-01

    Full Text Available We conducted a factorial simulation experiment to analyze the relative importance of movement pattern, boundary-crossing probability, and mortality in habitat and matrix on population density, and its dependency on habitat fragmentation, as well as inter-patch distance. We also examined how the initial response of a species to a fragmentation event may affect our observations of population density in post-fragmentation experiments. We found that the boundary-crossing probability from habitat to matrix, which partly determines the emigration rate, is the most important determinant for population density within habitat patches. The probability of crossing a boundary from matrix to habitat had a weaker, but positive, effect on population density. Movement behavior in habitat had a stronger effect on population density than movement behavior in matrix. Habitat fragmentation and inter-patch distance may have a positive or negative effect on population density. The direction of both effects depends on two factors. First, when the boundary-crossing probability from habitat to matrix is high, population density may decline with increasing habitat fragmentation. Conversely, for species with a high matrix-to-habitat boundary-crossing probability, population density may increase with increasing habitat fragmentation. Second, the initial distribution of individuals across the landscape: we found that habitat fragmentation and inter-patch distance were positively correlated with population density when individuals were distributed across matrix and habitat at the beginning of our simulation experiments. The direction of these relationships changed to negative when individuals were initially distributed across habitat only. Our findings imply that the speed of the initial response of organisms to habitat fragmentation events may determine the direction of observed relationships between habitat fragmentation and population density. The time scale of post-fragmentation

  4. The fragmentation of prestellar clouds

    International Nuclear Information System (INIS)

    Ibanez S, M.H.

    1979-10-01

    The radiative heating problem has been solved analytically, in first approximation, for a semi-infinite cloud model with transverse fluctuations in extinction. The radiative heating problem has been solved with the help of a numerical (approximated) method for the following models: a) semi-infinite cloud with transverse fluctuations in extinction; b) finite cloud with mean optical thickness tau 0 and transverse fluctuations in extinction. Assuming isobaricity as a first approximation, the chemical equation for H 2 formation (in non-equilibrium condition) and the energy equation were solved numerically like a two boundary-value problem. The conditions under which H 2 formation can induce fragmentation in a contracting cloud are examined. A study (in orders of magnitude) of the turbulence as a mechanism generator of density fluctuations has been done. If the Kolmogorov spectral law is assumed, subsonic turbulence is enough to provide any prestellar cloud with the elemental fluctuations which are effectively amplified by molecule formation in a time shorter than one free-fall. (author)

  5. Decoupling habitat fragmentation from habitat loss: butterfly species mobility obscures fragmentation effects in a naturally fragmented landscape of lake islands.

    Science.gov (United States)

    MacDonald, Zachary G; Anderson, Iraleigh D; Acorn, John H; Nielsen, Scott E

    2018-01-01

    Since the publication of the theory of island biogeography, ecologists have postulated that fragmentation of continuous habitat presents a prominent threat to species diversity. However, negative fragmentation effects may be artifacts; the result of species diversity declining with habitat loss, and habitat loss correlating positively with degree of fragmentation. In this study, we used butterfly assemblages on islands of Lake of the Woods, Ontario, Canada to decouple habitat fragmentation from habitat loss and test two competing hypotheses: (1) the island effect hypothesis, which predicts that decreasing fragment size and increasing fragment isolation reduces species diversity beyond the effects of habitat loss, and (2) the habitat amount hypothesis, which negates fragmentation effects and predicts that only total habitat area determines the diversity of species persisting on fragmented landscapes. Using eight independent size classes of islands (ranging from 0.1 to 8.0 ha) that varied in number of islands while holding total area constant, species diversity comparisons, species accumulation curves, and species-area relationship extrapolations demonstrated that smaller insular habitats contained at least as many butterfly species as continuous habitat. However, when highly mobile species occurring on islands without their larval food plants were excluded from analyses, island effects on potentially reproducing species became apparent. Similarily, generalized linear models suggested that effects of island isolation and vascular plant richness on insular butterfly richness were confounded by species of high mobility. We conclude that inter-fragment movements of highly mobile species may obscure important fragmentation effects on potentially reproducing populations, questioning support for the habitat amount hypothesis.

  6. Flow injection gas chromatography with sulfur chemiluminescence detection for the analysis of total sulfur in complex hydrocarbon matrixes.

    Science.gov (United States)

    Hua, Yujuan; Hawryluk, Myron; Gras, Ronda; Shearer, Randall; Luong, Jim

    2018-01-01

    A fast and reliable analytical technique for the determination of total sulfur levels in complex hydrocarbon matrices is introduced. The method employed flow injection technique using a gas chromatograph as a sample introduction device and a gas phase dual-plasma sulfur chemiluminescence detector for sulfur quantification. Using the technique described, total sulfur measurement in challenging hydrocarbon matrices can be achieved in less than 10 s with sample-to-sample time ideal for fast analysis or trace sulfur analysis. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Sulfur isotopic constraints from a single enzyme on the cellular to global sulfur cycles

    Science.gov (United States)

    Sim, M. S.; Adkins, J. F.; Sessions, A. L.; Orphan, V. J.; McGlynn, S.

    2017-12-01

    Since first reported more than a half century ago, sulfur isotope fractionation between sulfate and sulfide has been used as a diagnostic indicator of microbial sulfate reduction, giving added dimensions to the microbial ecological and geochemical studies of the sulfur cycle. A wide range of fractionation has attracted particular attention because it may serve as a potential indicator of environmental or physiological variables such as substrate concentrations or specific respiration rates. In theory, the magnitude of isotope fractionation depends upon the sulfur isotope effect imparted by the involved enzymes and the relative rate of each enzymatic reaction. The former defines the possible range of fractionation quantitatively, while the latter responds to environmental stimuli, providing an underlying rationale for the varying fractionations. The experimental efforts so far have concentrated largely on the latter, the factors affecting the size of fractionation. Recently, however, the direct assessment of intracellular processes emerges as a promising means for the quantitative analysis of microbial sulfur isotope fractionation as a function of environmental or physiological variables. Here, we experimentally determined for the first time the sulfur isotope fractionation during APS reduction, the first reductive step in the dissimilatory sulfate reduction pathway, using the enzyme purified from Desulfovibrio vulgaris Miyazaki. APS reductase carried out the one-step, two-electron reduction of APS to sulfite, without the production of other metabolic intermediates. Nearly identical isotope effects were obtained at two different temperatures, while the rate of APS reduction more than quadrupled with a temperature increase from 20 to 32°C. When placed in context of the linear network model for microbial sulfur isotope fractionation, our finding could provide a new, semi-quantitative constraint on the sulfur cycle at levels from cellular to global.

  8. Are we getting enough sulfur in our diet?

    Directory of Open Access Journals (Sweden)

    Han Bo

    2007-11-01

    Full Text Available Abstract Sulfur, after calcium and phosphorus, is the most abundant mineral element found in our body. It is available to us in our diets, derived almost exclusively from proteins, and yet only 2 of the 20 amino acids normally present in proteins contains sulfur. One of these amino acids, methionine, cannot be synthesized by our bodies and therefore has to be supplied by the diet. Cysteine, another sulfur containing amino acid, and a large number of key metabolic intermediates essential for life, are synthesized by us, but the process requires a steady supply of sulfur. Proteins contain between 3 and 6% of sulfur amino acids. A very small percentage of sulfur comes in the form of inorganic sulfates and other forms of organic sulfur present in foods such as garlic, onion, broccoli, etc. The minimal requirements (RDA for all the essential amino acids have always been estimated in terms of their ability to maintain a nitrogen balance. This method asses amino acid requirements for protein synthesis, only one of the pathways that methionine follows after ingestion. To adequately evaluate the RDA for methionine, one should perform, together with a nitrogen balance a sulfur balance, something never done, neither in humans nor animals. With this in mind we decided to evaluate the dietary intake of sulfur (as sulfur amino acids in a random population and perform sulfur balance studies in a limited number of human volunteers. Initially this was done to try and gain some information on the possible mode of action of a variety of sulfur containing compounds (chondroitin sulfate, glucosamine sulfate, and others, used as dietary supplements to treat diseases of the joints. Out of this study came information that suggested that a significant proportion of the population that included disproportionally the aged, may not be receiving sufficient sulfur and that these dietary supplements, were very likely exhibiting their pharmacological actions by supplying

  9. Accumulation of atmospheric sulfur in some Costa Rican soils

    Science.gov (United States)

    Bern, Carleton R.; Townsend, Alan R.

    2013-01-01

    Sulfur is one of the macronutrient elements whose sources to terrestrial ecosystems should shift from dominance by rock-weathering to atmospheric deposition as soils and underlying substrate undergo progressive weathering and leaching. However, the nature and timing of this transition is not well known. We investigated sources of sulfur to tropical rain forests growing on basalt-derived soils in the Osa Peninsula region of Costa Rica. Sulfur sources were examined using stable isotope ratios (δ34S) and compared to chemical indices of soil development. The most weathered soils, and the forests they supported, are dominated by atmospheric sulfur, while a less weathered soil type contains both rock-derived and atmospheric sulfur. Patterns of increasing δ34S with increasing soil sulfur concentration across the landscape suggest atmospheric sulfur is accumulating, and little rock-derived sulfur has been retained. Soil sulfur, minus adsorbed sulfate, is correlated with carbon and nitrogen, implying that sulfur accumulation occurs as plants and microbes incorporate sulfur into organic matter. Only the lower depth increments of the more weathered soils contained significant adsorbed sulfate. The evidence suggests a pattern of soil development in which sulfur-bearing minerals in rock, such as sulfides, weather early relative to other minerals, and the released sulfate is leached away. Sulfur added via atmospheric deposition is retained as organic matter accumulates in the soil profile. Adsorbed sulfate accumulates later, driven by changes in soil chemistry and mineralogy. These aspects of sulfur behavior during pedogenesis in this environment may hasten the transition to dominance by atmospheric sources.

  10. A note on convex renorming and fragmentability

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Abstract. Using the game approach to fragmentability, we give new and simpler proofs of the following known results: (a) If the Banach space admits an equivalent. Kadec norm, then its weak topology is fragmented by a metric which is stronger than the norm topology. (b) If the Banach space admits an equivalent rotund ...

  11. Fragmentation of eastern United States forest types

    Science.gov (United States)

    Kurt H. Riitters; John W. Coulston

    2013-01-01

    Fragmentation is a continuing threat to the sustainability of forests in the Eastern United States, where land use changes supporting a growing human population are the primary driver of forest fragmentation (Stein and others 2009). While once mostly forested, approximately 40 percent of the original forest area has been converted to other land uses, and most of the...

  12. Thermodynamics of the fuel fragmentation gas

    International Nuclear Information System (INIS)

    Perez, R.B.; Alsmiller, R.G. Jr.

    1977-01-01

    In the context of nuclear reactor safety studies, a program is in progress at ORNL whereby fuel-fragmentation situations are mocked up by the application of high-current capacitor discharges through solid UO 2 samples. The goal of the present work is to predict such quantities as the number of gas and liquid fragments and their energy distributions. The point of view adopted is that upon fragmentation, a cloud of UO 2 vapor is formed containing ''primeval'' liquid fragments which act as condensation centers. In the evolution of time, fragment growth is controlled by nucleation, coagulation and evaporation processes. Eventually, the vapor-droplet system will reach a situation in which clusters (fragments) of various sizes and UO 2 vapor will coexist in an ''association-disassociation'' equilibrium. Thus, the physical model considered here consists of the identification of the fragmentation gas with an ''imperfect'' vapor, made up of interacting UO 2 vapor and liquid fragments. The results of the study are presented

  13. Harnessing Fluorine-Sulfur Contacts and Multipolar Interactions for the Design of p53 Mutant Y220C Rescue Drugs.

    Science.gov (United States)

    Bauer, Matthias R; Jones, Rhiannon N; Baud, Matthias G J; Wilcken, Rainer; Boeckler, Frank M; Fersht, Alan R; Joerger, Andreas C; Spencer, John

    2016-08-19

    Many oncogenic mutants of the tumor suppressor p53 are conformationally unstable, including the frequently occurring Y220C mutant. We have previously developed several small-molecule stabilizers of this mutant. One of these molecules, PhiKan083, 1-(9-ethyl-9H-carbazole-3-yl)-N-methylmethanamine, binds to a mutation-induced surface crevice with a KD = 150 μM, thereby increasing the melting temperature of the protein and slowing its rate of aggregation. Incorporation of fluorine atoms into small molecule ligands can substantially improve binding affinity to their protein targets. We have, therefore, harnessed fluorine-protein interactions to improve the affinity of this ligand. Step-wise introduction of fluorines at the carbazole ethyl anchor, which is deeply buried within the binding site in the Y220C-PhiKan083 complex, led to a 5-fold increase in affinity for a 2,2,2-trifluoroethyl anchor (ligand efficiency of 0.3 kcal mol(-1) atom(-1)). High-resolution crystal structures of the Y220C-ligand complexes combined with quantum chemical calculations revealed favorable interactions of the fluorines with protein backbone carbonyl groups (Leu145 and Trp146) and the sulfur of Cys220 at the mutation site. Affinity gains were, however, only achieved upon trifluorination, despite favorable interactions of the mono- and difluorinated anchors with the binding pocket, indicating a trade-off between energetically favorable protein-fluorine interactions and increased desolvation penalties. Taken together, the optimized carbazole scaffold provides a promising starting point for the development of high-affinity ligands to reactivate the tumor suppressor function of the p53 mutant Y220C in cancer cells.

  14. Sulfur Dioxide Emissions from Congo Volcanoes

    Science.gov (United States)

    2002-01-01

    The Earth Probe Total Ozone Mapping Spectrometer (TOMS) detected a sulfur dioxide cloud associated with the January 2002 eruption of Nyiragongo as it flew over the region at around 11 a.m. local time (0900 UTC) on January 17. The sensor detected no significant amounts of ash in the eruption cloud. At the time of the TOMS overpass the cloud extended up to roughly 200 km (124 miles) northwest of Nyiragongo and was still attached to the volcano. This observation is consistent with nearly coincident MODIS imagery which shows an opaque cloud of gas and steam in the same location. The TOMS measurements show that the amount of sulfur dioxide in the Nyiragongo's plume range from about 10 to 30 kilotons. Please note that TOMS mass retrievals are dependent on the altitude of the cloud and may be adjusted as more information becomes available. Since the cloud may still have been developing at the time of the TOMS overpass, the final sulfur dioxide burden may have been greater. Wind trajectory data (courtesy of Leslie Lait, SSAI) suggest that part of the cloud may have reached at least mid- to upper-tropospheric altitudes of up to 12 km (7 miles), but scientists suspect no significant stratospheric injection of sulfur dioxide as a result of this eruption since the gas was not visible over the Democratic Republic of the Congo region in subsequent TOMS data acquired on January 18. Production of sulfur dioxide without a significant ash cloud is commonly observed during effusive eruptions such as the Nyiragongo event. Although dense low-level ash may be produced during such eruptions, these particulates usually fall out fairly quickly and elude detection by satellite. The size of the January 17 Nyiragongo cloud and the estimated sulfur dioxide tonnage are fairly modest, and at least an order of magnitude smaller than values typically measured by TOMS during eruptions of nearby Nyamuragira during its frequent outbursts (e.g., on February 6, 2001). Sulfur dioxide column amounts

  15. Accidental sulfur mustard exposure: A case report.

    Science.gov (United States)

    Schmidt, Annette; Steinritz, Dirk; Rudolf, Klaus-Dieter; Thiermann, Horst; Striepling, Enno

    2017-11-28

    The clinical progression following a sulfur mustard-induced skin exposure is well documented in the literature. Upon skin contact and a characteristic latency period, sulfur mustard (SM) causes erythema, blister formation and ulceration, which is associated with wound healing disorders that may require surgical treatment. Here, we present a case report of accidental exposure to SM in a laboratory setting which required surgical treatment of the skin. The case was illustrated at close intervals over a period of two years and underlines that exposure to SM has to be taken into account when typical clinical symptoms occur. Moreover skin grafts appear to be effective in SM-induced non healing skin ulcerations. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Mixed total screening for sulfur isotope

    International Nuclear Information System (INIS)

    Cui Bin; Zhao Lei; Zhan Zhaoyang; He Zhijun

    2003-01-01

    The research on modern economic geology indicates that most ore deposits formed with characters of multi-origin, multi-stage and multi-genesis. Quantificational research of Sulfur isotope origin is a difficult problem that puzzles Geochemists all along. So the formation process of an ore deposit can be taken as the mix or the superposition of multi totals, which can be described by the mathematics model of mixed total screening. In the study of mid-down Yangtze River and Dongpo ore field in Hunan province, the authors successfully applied the mathematics model of mixed total screening, quantificationally resolved the problem of Sulfur isotope origin and mineralizing matter origin, and found out the mineralizing mechanism. This is very valuable. (authors)

  17. Microbiological disproportionation of inorganic sulfur compounds

    DEFF Research Database (Denmark)

    Finster, Kai

    2008-01-01

    The disproportionation of inorganic sulfur intermediates at moderate temperatures (0-80 °C) is a microbiologically catalyzed chemolithotrophic process in which compounds like elemental sulfur, thiosulfate, and sulfite serve as both electron donor and acceptor, and generate hydrogen sulfide...... and sulfate. Thus the overall process is comparable to the fermentation of organic compounds such as glucose and is consequently often described as 'inorganic fermentation'. The process is primarily carried out by microorganisms with phylogenetic affiliation to the so called sulfate-reducing bacteria within...... the delta subclass of Proteobacteria. The organisms grow with sulfate as their external electron acceptor and low-molecular weight organic compounds or hydrogen as energy sources. Studies of the biochemistry of a few isolates indicate that the disproportionating microbes reverse the sulfate reduction...

  18. Volatile sulfur compounds in tropical fruits

    Directory of Open Access Journals (Sweden)

    Robert J. Cannon

    2018-04-01

    Full Text Available Global production and demand for tropical fruits continues to grow each year as consumers are enticed by the exotic flavors and potential health benefits that these fruits possess. Volatile sulfur compounds (VSCs are often responsible for the juicy, fresh aroma of tropical fruits. This poses a challenge for analytical chemists to identify these compounds as most often VSCs are found at low concentrations in most tropical fruits. The aim of this review is to discuss the extraction methods, enrichment techniques, and instrumentation utilized to identify and quantify VSCs in natural products. This will be followed by a discussion of the VSCs reported in tropical and subtropical fruits, with particular attention to the odor and taste attributes of each compound. Finally, the biogenesis and enzymatic formation of specific VSCs in tropical fruits will be highlighted along with the contribution each possesses to the aroma of their respective fruit. Keywords: Tropical fruits, Volatile sulfur compounds, Extraction methods

  19. Oxidative stress-mediated antiproliferative effects of furan-containing sulfur flavors in human leukemia Jurkat cells.

    Science.gov (United States)

    Zhang, Gong-Liang; Liang, Ying; Zhu, Jun-Ya; Jia, Qiong; Gan, Wei-Qi; Sun, Li-Ming; Hou, Hong-Man

    2015-08-01

    Antiproliferative effects of 15 sulfides were investigated in human leukemia Jurkat cells. Treatment with 5-50 μM of nine monosulfides and two linear disulfides did not induce DNA fragmentation. Whereas, furan-containing sulfur flavors including methyl 2-methyl-3-furyl disulfide (MMFDS), bis (2-methyl-3-furyl) disulfide (BMFDS), methyl furfuryl disulfide (MFDS) and difurfuryl disulfide (DFDS) induced DNA fragmentation to a varying extent in Jurkat cells. The cell viability-reduction effect of these sulfur flavors was in the following order: DFDS>BMFDS>MMFDS>MFDS based on the IC50 values. MMFDS and BMFDS, but not DFDS, significantly increased the intracellular ROS level by 1.90- and 3.02-fold, respectively. Addition of N-acetylcysteine (NAC) or glutathione (GSH) partially suppressed induction of DNA fragmentation, apoptosis and caspase-3 activation by MMFDS and BMFDS. These results suggest that the furan-containing disulfides have a strong antiproliferative effect, and the oxidative stress and subsequent caspase-3 activation are involved in antiproliferative effect induced by MMFDS and BMFDS in Jurkat cells. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Optical monitoring of surface anchoring changes for nematic liquid crystal based chemical and biological sensors

    Science.gov (United States)

    Zou, Yang

    In this dissertation, optically monitoring the surface anchoring changes of liquid crystal (LC) due to the chemical or biological bindings is presented. The deformation of LC director with different anchoring energies is simulated using Finite Element Method and continuum theory of nematic LC. The optical properties of the LC film are simulated using the Finite Difference Time Domain method. First, the interference color method was used to monitor the anchoring change. The calculated and experimental interference colors of liquid crystal films due to the optical retardation of two orthogonal electromagnetic components at different surface anchoring conditions and applied voltages are studied. The calculated colors were converted into sRGB parameters so that the corresponding colors can be displayed on a color computer monitor and printed out on a color printer. A gold micro-structure was fabricated and used to control the optical retardation. Polarizing micrographs were collected and compared with the calculated colors. Second, the influence of a bias voltage on the surface-driven orientational transition of liquid crystals resulted from the weakening anchoring and anchoring transition is analyzed theoretically and experimentally. The same interdigitated Au micro-structure was used in the nematic LC based chemical and biological sensors. With a suitable bias electric field, the process of the weakening anchoring energy and the uniform surface-driven orientational transition due to targeted molecules binding to a functionalized surface were observed optically. Finally, measurement of optical transmission was used to monitor the anchoring change. Polarizing micrographs were collected and compared with simulated textures. Experimental and simulation results both demonstrate the optical method can effectively monitor the surface anchoring change due to the presence of targeted analytes. These results show that these optical techniques are suitable for LC based sensing