Subsonic Aerodynamic Research Laboratory (SARL)

Data.gov (United States)

Federal Laboratory Consortium — Description: The SARL is a unique high contraction, open circuit subsonic wind tunnel providing a test velocity up to 436 mph (0.5 Mach number) and a high quality,...

Subsonic Ultra Green Aircraft Research

Science.gov (United States)

Bradley, Marty K.; Droney, Christopher K.

2011-01-01

This Final Report summarizes the work accomplished by the Boeing Subsonic Ultra Green Aircraft Research (SUGAR) team in Phase 1, which includes the time period of October 2008 through March 2010. The team consisted of Boeing Research and Technology, Boeing Commercial Airplanes, General Electric, and Georgia Tech. The team completed the development of a comprehensive future scenario for world-wide commercial aviation, selected baseline and advanced configurations for detailed study, generated technology suites for each configuration, conducted detailed performance analysis, calculated noise and emissions, assessed technology risks, and developed technology roadmaps. Five concepts were evaluated in detail: 2008 baseline, N+3 reference, N+3 high span strut braced wing, N+3 gas turbine battery electric concept, and N+3 hybrid wing body. A wide portfolio of technologies was identified to address the NASA N+3 goals. Significant improvements in air traffic management, aerodynamics, materials and structures, aircraft systems, propulsion, and acoustics are needed. Recommendations for Phase 2 concept and technology projects have been identified.

Integrated Application of Active Controls (IAAC) technology to an advanced subsonic transport project: Current and advanced act control system definition study

Science.gov (United States)

1982-01-01

The Current and Advanced Technology ACT control system definition tasks of the Integrated Application of Active Controls (IAAC) Technology project within the Energy Efficient Transport Program are summarized. The systems mechanize six active control functions: (1) pitch augmented stability; (2) angle of attack limiting; (3) lateral/directional augmented stability; (4) gust load alleviation; (5) maneuver load control; and (6) flutter mode control. The redundant digital control systems meet all function requirements with required reliability and declining weight and cost as advanced technology is introduced.

Near-Site Transportation Infrastructure Project

International Nuclear Information System (INIS)

Viebrock, J.M.; Mote, N.

1992-02-01

There are 122 commercial nuclear facilities from which spent nuclear fuel will be accepted by the Federal Waste Management System (FWMS). Since some facilities share common sites and some facilities are on adjacent sites, 76 sites were identified for the Near-Site Transportation Infrastructure (NSTI) project. The objective of the NSTI project was to identify the options available for transportation of spent-fuel casks from each of these commercial nuclear facility sites to the main transportation routes -- interstate highways, commercial rail lines and navigable waterways available for commercial use. The near-site transportation infrastructure from each site was assessed, based on observation of technical features identified during a survey of the routes and facilities plus data collected from referenced information sources. The potential for refurbishment of transportation facilities which are not currently operational was also assessed, as was the potential for establishing new transportation facilities

Infrared Images of Boundary Layer Transition on the D8 Transport Configuration in the LaRC 14- by 22-Foot Subsonic Tunnel

Science.gov (United States)

Mason, Michelle L.; Gatlin, Gregory M.

2015-01-01

Grit, trip tape, or trip dots are routinely applied on the leading-edge regions of the fuselage, wings, tails or nacelles of wind tunnel models to trip the flow from laminar to turbulent. The thickness of the model's boundary layer is calculated for nominal conditions in the wind tunnel test to determine the effective size of the trip dots, but the flow over the model may not transition as intended for runs with different flow conditions. Temperature gradients measured with an infrared camera can be used to detect laminar to turbulent boundary layer transition on a wind tunnel model. This non-intrusive technique was used in the NASA Langley 14- by 22-Foot Subsonic Tunnel to visualize the behavior of the flow over a D8 transport configuration model. As the flow through the wind tunnel either increased to or decreased from the run conditions, a sufficient temperature difference existed between the air and the model to visualize the transition location (due to different heat transfer rates through the laminar and the turbulent boundary layers) for several runs in this test. Transition phenomena were visible without active temperature control in the atmospheric wind tunnel, whether the air was cooler than the model or vice-versa. However, when the temperature of the model relative to the air was purposely changed, the ability to detect transition in the infrared images was enhanced. Flow characteristics such as a wing root horseshoe vortex or the presence of fore-body vortical flows also were observed in the infrared images. The images of flow features obtained for this study demonstrate the usefulness of current infrared technology in subsonic wind tunnel tests.

Multi-Mission Earth Vehicle Subsonic Dynamic Stability Testing and Analyses

Science.gov (United States)

Glaab, Louis J.; Fremaux, C. Michael

2013-01-01

Multi-Mission Earth Entry Vehicles (MMEEVs) are blunt-body vehicles designed with the purpose of transporting payloads from outer space to the surface of the Earth. To achieve high-reliability and minimum weight, MMEEVs avoid use of limited-reliability systems, such as parachutes, retro-rockets, and reaction control systems and rely on the natural aerodynamic stability of the vehicle throughout the Entry, Descent, and Landing (EDL) phase of flight. The Multi-Mission Systems Analysis for Planetary Entry (M-SAPE) parametric design tool is used to facilitate the design of MMEEVs for an array of missions and develop and visualize the trade space. Testing in NASA Langley?s Vertical Spin Tunnel (VST) was conducted to significantly improve M-SAPE?s subsonic aerodynamic models. Vehicle size and shape can be driven by entry flight path angle and speed, thermal protection system performance, terminal velocity limitations, payload mass and density, among other design parameters. The objectives of the VST testing were to define usable subsonic center of gravity limits, and aerodynamic parameters for 6-degree-of-freedom (6-DOF) simulations, for a range of MMEEV designs. The range of MMEEVs tested was from 1.8m down to 1.2m diameter. A backshell extender provided the ability to test a design with a much larger payload for the 1.2m MMEEV.

Risk variables in evaluation of transport projects

Science.gov (United States)

Vařbuchta, Petr; Kovářová, Hana; Hromádka, Vít; Vítková, Eva

2017-09-01

Depending on the constantly increasing demands on assessment of investment projects, especially assessment of large-scale projects in transport and important European projects with wide impacts, there is constantly increasing focus on risk management, whether to find mitigations, creating corrective measures or their implementation in assessment, especially in the context of Cost-Benefit analysis. To project assessment is often used implementation of certain risk variables, which can generate negative impacts of project outputs in framework of assess. Especially in case of transportation infrastructure projects is taken much emphasis on the influence of risk variables. However, currently in case of assessment of transportation projects is in Czech Republic used a few risk variables, which occur in the most projects. This leads to certain limitation in framework of impact assessment of risk variables. This papers aims to specify a new risk variables and process of applying them to already executed project assessment. Based on changes generated by new risk variables will be evaluated differences between original and adapted assessment.

Oblique-Flying-Wing Supersonic Transport Airplane

Science.gov (United States)

Van Der Velden, Alexander J. M.

1992-01-01

Oblique-flying-wing supersonic airplane proposed as possible alternative to B747B (or equivalent). Tranports passengers and cargo as fast as twice speed of sound at same cost as current subsonic transports. Flies at same holding speeds as present supersonic transports but requires only half takeoff distance.

The SIMPSONS project: An integrated Mars transportation system

Science.gov (United States)

Kaplan, Matthew; Carlson, Eric; Bradfute, Sherie; Allen, Kent; Duvergne, Francois; Hernandez, Bert; Le, David; Nguyen, Quan; Thornhill, Brett

In response to the Request for Proposal (RFP) for an integrated transportation system network for an advanced Martian base, Frontier Transportation Systems (FTS) presents the results of the SIMPSONS project (Systems Integration for Mars Planetary Surface Operations Networks). The following topics are included: the project background, vehicle design, future work, conclusions, management status, and cost breakdown. The project focuses solely on the surface-to-surface transportation at an advanced Martian base.

Computation of subsonic flow around airfoil systems with multiple separation

Science.gov (United States)

Jacob, K.

1982-01-01

A numerical method for computing the subsonic flow around multi-element airfoil systems was developed, allowing for flow separation at one or more elements. Besides multiple rear separation also sort bubbles on the upper surface and cove bubbles can approximately be taken into account. Also, compressibility effects for pure subsonic flow are approximately accounted for. After presentation the method is applied to several examples and improved in some details. Finally, the present limitations and desirable extensions are discussed.

Investigation of a subsonic-arc-attachment thruster using segmented anodes

Science.gov (United States)

Berns, Darren H.; Sankovic, John M.; Sarmiento, Charles J.

1993-01-01

To investigate high frequency arc instabilities observed in subsonic-arc-attachment thrusters, a 3 kW, segmented-anode arcjet was designed and tested using hydrogen as the propellant. The thruster nozzle geometry was scaled from a 30 kW design previously tested in the 1960's. By observing the current to each segment and the arc voltage, it was determined that the 75-200 kHz instabilities were results of axial movements of the arc anode attachment point. The arc attachment point was fully contained in the subsonic portion of the nozzle for nearly all flow rates. The effects of isolating selected segments were investigated. In some cases, forcing the arc downstream caused the restrike to cease. Finally, decreasing the background pressure from 18 Pa to 0.05 Pa affected the pressure distribution in the nozzle, including the pressure in the subsonic arc chamber.

Investigation of a subsonic-arc-attachment thruster using segmented anodes

Science.gov (United States)

Berns, Darren H.; Sankovic, John M.; Sarmiento, Charles J.

1993-01-01

To investigate high frequency arc instabilities observed in subsonic-arc-attachment thrusters, a 3 kW, segmented-anode arc jet was designed and tested using hydrogen as the propellant. The thruster nozzle geometry was scaled from a 30 kW design previously tested in the 1960's. By observing the current to each segment and the arc voltage, it was determined that the 75-200 kHz instabilities were results of axial movements of the arc anode attachment point. The arc attachment point was fully contained in the subsonic portion of the nozzle for nearly all flow rates. The effects of isolating selected segments were investigated. In some cases, forcing the arc downstream caused the restrike to cease. Finally, decreasing the background pressure from 18 to 0.05 Pa affected the pressure distribution in the nozzle including the pressure in the subsonic arc chamber.

BEST Project: bioethanol for sustainable transportation; Projeto BEST: bioetanol para o transporte sustentavel

Energy Technology Data Exchange (ETDEWEB)

Moreira, J R; Velazquez, S M.S.G.; Apolinario, S M; Melo, E H; Elmadjian, P H [Universidade de Sao Paulo (IEE/CENBIO/USP), SP (Brazil). Inst. de Eletrotecnica e Energia. Centro Nacional de Referencia em Biomassa

2008-07-01

The BEST Project BioEthanol for Sustainable Transport aims to promote the ethanol usage, replacing diesel, in the urban public transport in Brazil and worldwide. Apart from Sao Paulo, leading city in the Americas, another eight cities located in Europe and Asia takes part in the project. One of the Brazilian project's goals is to evaluate ethanol usage as diesel fuel replacement in public transport buses by comparatively following the operational output of the experimental fleet, taking as reference an equivalent diesel bus. The utilized test vehicles will be evaluated and monitored to demonstrate ethanol energetic efficiency and, after the results the BEST project and the European Union will set a blue print for public policies to incentive ethanol usage in the urban public transport. The results will allow identifying technical and economical barriers that will eventually overlap the viability process of this technology in the Brazilian public transport. (author)

Projection of future transport energy demand of Thailand

International Nuclear Information System (INIS)

Limanond, Thirayoot; Jomnonkwao, Sajjakaj; Srikaew, Artit

2011-01-01

The objective of this study is to project transport energy consumption in Thailand for the next 20 years. The study develops log-linear regression models and feed-forward neural network models, using the as independent variables national gross domestic product, population and the numbers of registered vehicles. The models are based on 20-year historical data between years 1989 and 2008, and are used to project the trends in future transport energy consumption for years 2010-2030. The final log-linear models include only gross domestic product, since all independent variables are highly correlated. It was found that the projection results of this study were in the range of 54.84-59.05 million tonnes of oil equivalent, 2.5 times the 2008 consumption. The projected demand is only 61-65% of that predicted in a previous study, which used the LEAP model. This major discrepancy in transport energy demand projections suggests that projects related to this key indicator should take into account alternative projections, because these numbers greatly affect plans, policies and budget allocation for national energy management. - Research highlights: → Thailand transport energy consumption would increase to 54.4-59.1 MTOE in Year 2030. → The log-linear models yield a slightly higher projection than the ANN models. → The elasticity of transport energy demand with respect to GDP is 0.995.

Projection of future transport energy demand of Thailand

Energy Technology Data Exchange (ETDEWEB)

Limanond, Thirayoot, E-mail: tlimanond@yahoo.co [School of Transportation Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000 (Thailand); Jomnonkwao, Sajjakaj [School of Transportation Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000 (Thailand); Srikaew, Artit [School of Electrical Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima 30000 (Thailand)

2011-05-15

The objective of this study is to project transport energy consumption in Thailand for the next 20 years. The study develops log-linear regression models and feed-forward neural network models, using the as independent variables national gross domestic product, population and the numbers of registered vehicles. The models are based on 20-year historical data between years 1989 and 2008, and are used to project the trends in future transport energy consumption for years 2010-2030. The final log-linear models include only gross domestic product, since all independent variables are highly correlated. It was found that the projection results of this study were in the range of 54.84-59.05 million tonnes of oil equivalent, 2.5 times the 2008 consumption. The projected demand is only 61-65% of that predicted in a previous study, which used the LEAP model. This major discrepancy in transport energy demand projections suggests that projects related to this key indicator should take into account alternative projections, because these numbers greatly affect plans, policies and budget allocation for national energy management. - Research highlights: {yields} Thailand transport energy consumption would increase to 54.4-59.1 MTOE in Year 2030. {yields} The log-linear models yield a slightly higher projection than the ANN models. {yields} The elasticity of transport energy demand with respect to GDP is 0.995.

BEST Project: bioethanol for sustainable transportation; Projeto BEST: bioetanol para o transporte sustentavel

Energy Technology Data Exchange (ETDEWEB)

Moreira, J.R.; Velazquez, S.M.S.G.; Apolinario, S.M.; Melo, E.H.; Elmadjian, P.H. [Universidade de Sao Paulo (IEE/CENBIO/USP), SP (Brazil). Inst. de Eletrotecnica e Energia. Centro Nacional de Referencia em Biomassa

2008-07-01

The BEST Project BioEthanol for Sustainable Transport aims to promote the ethanol usage, replacing diesel, in the urban public transport in Brazil and worldwide. Apart from Sao Paulo, leading city in the Americas, another eight cities located in Europe and Asia takes part in the project. One of the Brazilian project's goals is to evaluate ethanol usage as diesel fuel replacement in public transport buses by comparatively following the operational output of the experimental fleet, taking as reference an equivalent diesel bus. The utilized test vehicles will be evaluated and monitored to demonstrate ethanol energetic efficiency and, after the results the BEST project and the European Union will set a blue print for public policies to incentive ethanol usage in the urban public transport. The results will allow identifying technical and economical barriers that will eventually overlap the viability process of this technology in the Brazilian public transport. (author)

Calculations of air cooler for new subsonic wind tunnel

Science.gov (United States)

Rtishcheva, A. S.

2017-10-01

As part of the component development of TsAGI’s new subsonic wind tunnel where the air flow velocity in the closed test section is up to 160 m/sec hydraulic and thermal characteristics of air cooler are calculated. The air cooler is one of the most important components due to its highest hydraulic resistance in the whole wind tunnel design. It is important to minimize its hydraulic resistance to ensure the energy efficiency of wind tunnel fans and the cost-cutting of tests. On the other hand the air cooler is to assure the efficient cooling of air flow in such a manner as to maintain the temperature below 40 °C for seamless operation of measuring equipment. Therefore the relevance of this project is driven by the need to develop the air cooler that would demonstrate low hydraulic resistance of air and high thermal effectiveness of heat exchanging surfaces; insofar as the cooling section must be given up per unit time with the amount of heat Q=30 MW according to preliminary evaluations. On basis of calculation research some variants of air cooler designs are proposed including elliptical tubes, round tubes, and lateral plate-like fins. These designs differ by the number of tubes and plates, geometrical characteristics and the material of finned surfaces (aluminium or cooper). Due to the choice of component configurations a high thermal effectiveness is achieved for finned surfaces. The obtained results form the basis of R&D support in designing the new subsonic wind tunnel.

Aircraft Emission Inventories Projected in Year 2015 for a High Speed Civil Transport (HSCT) Universal Airline Network. Final report

Energy Technology Data Exchange (ETDEWEB)

Baughcum, S.L.; Henderson, S.C.

1995-07-01

This report describes the development of a three-dimensional database of aircraft fuel burn and emissions (fuel burned, NOx, CO, and hydrocarbons) from projected fleets of high speed civil transports (HSCT`s) on a universal airline network. Inventories for 500 and 1000 HSCT fleets, as well as the concurrent subsonic fleets, were calculated. The objective of this work was to evaluate the changes in geographical distribution of the HSCT emissions as the fleet size grew from 500 to 1000 HSCT`s. For this work, a new expanded HSCT network was used and flights projected using a market penetration analysis rather than assuming equal penetration as was done in the earlier studies. Emission inventories on this network were calculated for both Mach 2.0 and Mach 2.4 HSCT fleets with NOx cruise emission indices of approximately 5 and 15 grams NOx/kg fuel. These emissions inventories are available for use by atmospheric scientists conducting the Atmospheric Effects of Stratospheric Aircraft (AESA) modeling studies. Fuel burned and emissions of nitrogen oxides (NOx as NO2), carbon monoxide, and hydrocarbons have been calculated on a 1 degree latitude x 1 degree longitude x 1 kilometer attitude grid and delivered to NASA as electronic files.

Green Propulsion Technologies for Advanced Air Transports

Science.gov (United States)

Del Rosario, Ruben

2015-01-01

Air transportation is critical to U.S. and Global economic vitality. However, energy and climate issues challenge aviations ability to be sustainable in the long term. Aviation must dramatically reduce fuel use and related emissions. Energy costs to U.S. airlines nearly tripled between 1995 and 2011, and continue to be the highest percentage of operating costs. The NASA Advanced Air Transports Technology Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advanced technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. The presentation will highlight the NASA vision of revolutionary systems and propulsion technologies needed to achieve these challenging goals. Specifically, the primary focus is on the N+3 generation; that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe, which are envisioned as being powered by Hybrid Electric Propulsion Systems.

Mathematical aspects of subsonic and transonic gas dynamics

CERN Document Server

Bers, Lipman

2016-01-01

Concise treatment by prominent mathematician covers differential equations of potential gas flow, mathematical background of subsonic flow theory, behavior of flow at infinity, flows in channels and with free boundary, more. 1958 edition.

Midwestern High-Level Radioactive Waste Transportation Project

International Nuclear Information System (INIS)

1993-01-01

On February 17,1989, the Midwestern Office of The Council of State Governments and the US Department of Energy entered into a cooperative agreement authorizing the initiation of the Midwestern High-Level Radioactive Waste Transportation Project. The transportation project continued to receive funding from DOE through amendments to the original cooperative agreement, with December 31, 1993, marking the end of the initial 5-year period. This progress report reflects the work completed by the Midwestern Office from February 17,1989, through December 31,1993. In accordance with the scopes of work governing the period covered by this report, the Midwestern Office of The Council of State Governments has worked closely with the Midwestern High-Level Radioactive Waste Committee. Project staff have facilitated all eight of the committee's meetings and have represented the committee at meetings of DOE's Transportation Coordination Group (TCG) and Transportation External Coordination Working Group (TEC/WG). Staff have also prepared and submitted comments on DOE activities on behalf of the committee. In addition to working with the committee, project staff have prepared and distributed 20 reports, including some revised reports (see Attachment 1). Staff have also developed a library of reference materials for the benefit of committee members, state officials, and other interested parties. To publicize the library, and to make it more accessible to potential users, project staff have prepared and distributed regular notices of resource availability

77 FR 76597 - Limitation on Claims against Proposed Public Transportation Projects

Science.gov (United States)

2012-12-28

... Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... actions announced herein for the listed public transportation project will be barred unless the claim is... issuing certain approvals for the public transportation project listed below. The actions on this project...

Nonlinear interaction model of subsonic jet noise.

Science.gov (United States)

Sandham, Neil D; Salgado, Adriana M

2008-08-13

Noise generation in a subsonic round jet is studied by a simplified model, in which nonlinear interactions of spatially evolving instability modes lead to the radiation of sound. The spatial mode evolution is computed using linear parabolized stability equations. Nonlinear interactions are found on a mode-by-mode basis and the sound radiation characteristics are determined by solution of the Lilley-Goldstein equation. Since mode interactions are computed explicitly, it is possible to find their relative importance for sound radiation. The method is applied to a single stream jet for which experimental data are available. The model gives Strouhal numbers of 0.45 for the most amplified waves in the jet and 0.19 for the dominant sound radiation. While in near field axisymmetric and the first azimuthal modes are both important, far-field sound is predominantly axisymmetric. These results are in close correspondence with experiment, suggesting that the simplified model is capturing at least some of the important mechanisms of subsonic jet noise.

Guidelines to Mainstream Gender in Transport Projects

OpenAIRE

Luz Caballero

2008-01-01

The consideration of gender in transport is essential to ensure that transport is equitable, affordable, and provides access to resources and opportunities required for development. This note aims to provide guidance for mainstreaming gender into transport projects. It provides examples of how to do this, in relation to the various transport modes used in development operations by the Wor...

78 FR 53001 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2013-08-27

... Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... announced herein for the listed public transportation project will be barred unless the claim is filed on or... issuing certain approvals for the public transportation projects listed below. The actions on the projects...

78 FR 23817 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2013-04-22

... Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... announced herein for the listed public transportation project will be barred unless the claim is filed on or... issuing certain approvals for the public transportation projects listed below. The actions on the projects...

Subsonic Transonic Applied Refinements By Using Key Strategies - STARBUKS In the NASA Langley Research Center National Transonic Facility

Science.gov (United States)

Paryz, Roman W.

2014-01-01

Several upgrade projects have been completed at the NASA Langley Research Center National Transonic Facility over the last 1.5 years in an effort defined as STARBUKS - Subsonic Transonic Applied Refinements By Using Key Strategies. This multi-year effort was undertaken to improve NTF's overall capabilities by addressing Accuracy and Validation, Productivity, and Reliability areas at the NTF. This presentation will give a brief synopsis of each of these efforts.

77 FR 71475 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2012-11-30

... Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... public transportation project will be barred unless the claim is filed on or before April 29, 2013. FOR... the public transportation projects listed below. The actions on the projects, as well as the laws...

77 FR 43144 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2012-07-23

... Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... public transportation project will be barred unless the claim is filed on or before January 21, 2013. FOR... the public transportation projects listed below. The actions on these projects, as well as the laws...

The potential of intermodal transport projects in Romania

Directory of Open Access Journals (Sweden)

Tudorica Alexandra

2017-07-01

Full Text Available The transport infrastructure sector is facing challenges related to the decarbonisation, financing and integrated developments, which need to be overcome so it can gain a competitive advantage among the strategic economic sectors. Known as a major pollutant, with 23.3 % of the total EU-28 GHG emissions in 2014, one of the transport policy objectives is to lower this percentage, by focusing on innovative solutions and modal shift (Eurostat, 2016. The White Paper (2011 promotes a sustainable development, aiming at a reduction by 60% by 2050 of the carbon emissions generated by the transport sector and at a modal shift from road to rail or waterborne transport for freight transport over 300 km with 30% by 2030, and more than 50% by 2050. The focus on an integrated development of the transport sector at the European level was reinforced with the adoption of the EU Regulation no. 1315/2013, marking the transition from a patchwork of different projects towards a vision for the achievement of an EU transport network. Moreover, another challenge is related to the scarce availability of the public money, making it necessary to attract private parties in the development of the transport infrastructure projects (The Investment Plan for Europe, 2014. Supporting the development of the intermodal transport is a way of surmounting the obstacles that this sector is confronting with, which is being implemented in Europe. The intermodal transport is introducing a paradigm shift, allowing the integration of the different transport modes together with their own advantages, as opposed to competing stand-alone modes and it can aid in the fight against climate change, scarce financial resources and congestion This article aims at determining the potential of Romania, as a member of European Union, to develop intermodal transport projects, to identify the funding sources, the obstacles and the solutions to promote the successful implementation of such projects.

Experimental study of subsonic microjet escaping from a rectangular nozzle

Science.gov (United States)

Aniskin, V. M.; Maslov, A. A.; Mukhin, K. A.

2016-10-01

The first experiments on the subsonic laminar microjets escaping from the nozzles of rectangular shape are carried out. The nozzle size is 83.3x3823 microns. Reynolds number calculated by the nozzle height and the average flow velocity at the nozzle exit ranged from 58 to 154. The working gas was air at room temperature. The velocity decay and velocity fluctuations along the center line of the jet are determined. The fundamental difference between the laminar microjets characteristics and subsonic turbulent jets of macro size is shown. Based on measurements of velocity fluctuations it is shown the presence of laminar-turbulent transition in microjets and its location is determined.

Airfoil shape for flight at subsonic speeds

Science.gov (United States)

Whitcomb, Richard T.

1976-01-01

An airfoil having an upper surface shaped to control flow accelerations and pressure distribution over the upper surface and to prevent separation of the boundary layer due to shock wave formulation at high subsonic speeds well above the critical Mach number. A highly cambered trailing edge section improves overall airfoil lifting efficiency.

77 FR 64586 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2012-10-22

... Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... actions announced herein for the listed public transportation project will be barred unless the claim is... actions by issuing certain approvals for the public transportation projects listed below. The actions on...

78 FR 65756 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2013-11-01

... Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... review of the FTA actions announced herein for the listed public transportation project will be barred... taken final agency actions by issuing certain approvals for the public transportation project listed...

78 FR 45287 - Limitation on Claims against Proposed Public Transportation Projects

Science.gov (United States)

2013-07-26

... Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... FTA action announced herein for the listed public transportation project will be barred unless the... final agency action by issuing a certain approval for the public transportation project listed below...

Modelling of Transport Projects Uncertainties

DEFF Research Database (Denmark)

Salling, Kim Bang; Leleur, Steen

2009-01-01

This paper proposes a new way of handling the uncertainties present in transport decision making based on infrastructure appraisals. The paper suggests to combine the principle of Optimism Bias, which depicts the historical tendency of overestimating transport related benefits and underestimating...... to supplement Optimism Bias and the associated Reference Class Forecasting (RCF) technique with a new technique that makes use of a scenario-grid. We tentatively introduce and refer to this as Reference Scenario Forecasting (RSF). The final RSF output from the CBA-DK model consists of a set of scenario......-based graphs which function as risk-related decision support for the appraised transport infrastructure project....

Development and validation of cryogenic foam insulation for LH2 subsonic transports

Science.gov (United States)

Anthony, F. M.; Colt, J. Z.; Helenbrook, R. G.

1981-01-01

Fourteen foam insulation specimens were tested. Some were plain foam while others contained flame retardants, chopped fiberglass reinforcement and/or vapor barriers. The thermal performance of the insulation was determined by measuring the rate at which LH2 boiled from an aluminum tank insulated with the test material. The test specimens were approximately 50 mm (2 in.) thick. They were structurally scaled so that the test cycle would duplicate the maximum thermal stresses predicted for the thicker insulation of an aircraft liquid hydrogen fuel tank during a typical subsonic flight. The simulated flight cycle of approximately 10 minutes duration heated the other insulation surface to 316 K (110 F) and cooled it to 226 K (20 F) while the inner insulation surface remained at liquid hydrogen temperature of 20 K (-423 F). Two urethane foam insulations exceeded the initial life goal of 2400 simulated flight cycles and sustained 4400 cycles with only minor damage. The addition of fiberglass reinforcement of flame retardant materials to an insulation degraded thermal performance and/or the life of the foam material. Installation of vapor barriers enhanced the structural integrity of the material but did not improve thermal performance. All of the foams tested were available materials; none were developed specifically for LH2 service.

Fiscal Feasibility Assessment Applied to Transport Infrastructure Projects

Energy Technology Data Exchange (ETDEWEB)

Guilherme de Aragão, J.J.; Santos Fontes Pereira, L. dos; Yamashita, Y.; Brandão, R.

2016-07-01

The demand for transport infrastructure investment is a latent issue for several countries, mainly for developing countries. However, investments in major logistics projects should be carefully evaluated, in order that their deployment induces development without endangering fiscal sustainability by excessive public indebtedness. Fiscal accounting practices used currently in the feasibility studies of transport infrastructures in Brazil are very limited, as they do not consider indirect and induced effects of the infrastructure investment in the fiscal evaluation. In addition, the corresponding influence area has not an established delimitation method. The aim of the present paper is to develop a model for calculating economic and fiscal impacts of transport infrastructure investment projects that includes the direct, indirect and induced effects within a reference area do be determined. First, different project assessment guides in Brazil and abroad are examined with a special focus on the assessment of economic and fiscal impacts of the projects. Based on the assessment experience and on the definition of the fiscal balance of an infrastructure project, the next step sets up a framework for the calculation of the impacts, using more simplified data. (Author)

Modelling of Transport Projects Uncertainties

DEFF Research Database (Denmark)

Salling, Kim Bang; Leleur, Steen

2012-01-01

This paper proposes a new way of handling the uncertainties present in transport decision making based on infrastructure appraisals. The paper suggests to combine the principle of Optimism Bias, which depicts the historical tendency of overestimating transport related benefits and underestimating...... to supplement Optimism Bias and the associated Reference Class Forecasting (RCF) technique with a new technique that makes use of a scenario-grid. We tentatively introduce and refer to this as Reference Scenario Forecasting (RSF). The final RSF output from the CBA-DK model consists of a set of scenario......-based graphs which functions as risk-related decision support for the appraised transport infrastructure project. The presentation of RSF is demonstrated by using an appraisal case concerning a new airfield in the capital of Greenland, Nuuk....

A transportation-scheduling system for managing silvicultural projects

Science.gov (United States)

Jorge F. Valenzuela; H. Hakan Balci; Timothy McDonald

2005-01-01

A silvicultural project encompasses tasks such as sitelevel planning, regeneration, harvestin, and stand-tending treatments. an essential problem in managing silvicultural projects is to efficiently schedule the operations while considering project task due dates and costs of moving scarce resources to specific job locations. Transportation costs represent a...

77 FR 6624 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2012-02-08

... Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... for the listed public transportation project will be barred unless the claim is filed on or before... approvals for the public transportation projects listed below. The actions on these projects, as well as the...

76 FR 35939 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2011-06-20

... Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... announced herein for the listed public transportation project will be barred unless the claim is filed on or... approvals for the public transportation projects listed below. The actions on these projects, as well as the...

76 FR 60963 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2011-09-30

... Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... announced herein for the listed public transportation project will be barred unless the claim is filed on or... the public transportation projects listed below. The actions on these projects, as well as the laws...

76 FR 19522 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2011-04-07

... Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... herein for the listed public transportation projects will be barred unless the claim is filed on or... approvals for the public transportation projects listed below. The actions on these projects, as well as the...

76 FR 72746 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2011-11-25

... Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... for the listed public transportation project will be barred unless the claim is filed on or before May... approvals for the public transportation projects listed below. The actions on these projects, as well as the...

Transport project evaluation: feasibility risk assessment and scenario forecasting

DEFF Research Database (Denmark)

Salling, Kim Bang; Leleur, Steen

2017-01-01

This paper presents a new approach to transport project assessment in terms of feasibility risk assessment and reference class forecasting. Conventionally, transport project assessment is based upon a Cost-Benefit Analysis (CBA) where evaluation criteria such as Benefit Cost Ratios (BCR...... on the preliminary construction cost estimates. Hereafter, a quantitative risk analysis is provided making use of Monte Carlo simulation. This approach facilitates random input parameters based upon reference class forecasting, hence, a parameter data fit has been performed in order to obtain validated probability...... Scenario Forecasting (RSF) frame. The RSF is anchored in the cost-benefit analysis; thus, it provides decision-makers with a quantitative mean of assessing the transport infrastructure project. First, the RSF method introduces uncertainties within the CBA by applying Optimism Bias uplifts...

76 FR 25773 - Notice of Limitation on Claims Against Proposed Public Transportation Project

Science.gov (United States)

2011-05-05

... Proposed Public Transportation Project AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice of... announced herein for the listed public transportation project will be barred unless the claim is filed on or... approvals for the public transportation project listed below. The actions on this project, as well as the...

Subsonic Swept Fan Blade

Science.gov (United States)

Gallagher, Edward J. (Inventor); Rogers, Thomas H. (Inventor)

2017-01-01

A gas turbine engine includes a spool, a turbine coupled to drive the spool, a propulsor coupled to be driven at a at a design speed by the turbine through the spool, and a gear assembly coupled between the propulsor and the spool. Rotation of the turbine drives the propulsor at a different speed than the spool. The propulsor includes a hub and a row of propulsor blades that extend from the hub. Each of the propulsor blades includes an airfoil body. The leading edge of the airfoil body has a swept profile such that, at the design speed, a component of a relative velocity vector of a working gas that is normal to the leading edge is subsonic along the entire radial span.

77 FR 26818 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2012-05-07

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Notice of Limitation on Claims Against Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... public transportation projects listed below. The actions on these projects, as well as the laws under...

Simultaneous, Unsteady PIV and Photogrammetry Measurements of a Tension-Cone Decelerator in Subsonic Flow

Science.gov (United States)

Schairer, Edward T.; Heineck, James T.; Walker, Louise Ann; Kushner, Laura Kathryn; Zilliac, Gregory

2010-01-01

This paper describes simultaneous, synchronized, high-frequency measurements of both unsteady flow in the wake of a tension-cone decelerator in subsonic flow (by PIV) and the unsteady shape of the decelerator (by photogrammetry). The purpose of these measurements was to develop the test techniques necessary to validate numerical methods for computing fluid-structure interactions of flexible decelerators. A critical need for this effort is to map fabric surfaces that have buckled or wrinkled so that code developers can accurately represent them. This paper describes a new photogrammetric technique that performs this measurement. The work was done in support of the Entry, Descent, and Landing discipline within the Supersonics Project of NASA s Fundamental Aeronautics Program.

Project consistency with transportation plans and air quality conformity workshops : technical report.

Science.gov (United States)

2015-04-01

This implementation project supports streamlined project delivery, one of the goals outlined by the Texas : Department of Transportation (TxDOT) leadership to achieve an efficient and effective transportation system : in Texas. The project benefits T...

76 FR 2950 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2011-01-18

... Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... judicial review of the FTA actions announced herein for the listed public transportation projects will be... final agency actions by issuing certain approvals for the public transportation projects listed below...

75 FR 13335 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2010-03-19

... Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... judicial review of the FTA actions announced herein for the listed public transportation projects will be... FTA has taken final agency actions by issuing certain approvals for the public transportation projects...

77 FR 322 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2012-01-04

... Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... judicial review of the FTA actions announced herein for the listed public transportation project will be... FTA has taken final agency actions by issuing certain approvals for the public transportation projects...

75 FR 71181 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2010-11-22

... Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... judicial review of the FTA actions announced herein for the listed public transportation projects will be... issuing certain approvals for the public transportation projects listed below. The actions on these...

CARONTE project: Creating an Agenda for Research on Transportation Security

Energy Technology Data Exchange (ETDEWEB)

Leon Bello, J.; Gonzalez Viosca, E.

2016-07-01

Europe’s prosperity relies on effective transport systems. Any attacks and disturbances to land freight and passenger transport would have significant impact on economic growth, territorial cohesion, social development and the environment. Unfortunately, there are weaknesses in the land transport security.The objective of CARONTE project is define a future research agenda for security in land transport that focuses on core gaps caused by emerging risks while avoiding any doubling-up of research elsewhere. Its research agenda will cover all threats, including cyber-crime, and security aspects across all modes of land transportation. At the same time, it will respect the fundamental human rights and privacy of European citizens. The step-by-step method of CARONTE’s consortium has analyzed the state of the art and emerging risks; has identified gaps, analyses and assessments of potential solutions; and has produced an overall research agenda for the future. CARONTE’s results will answer the following questions among others: Which existing research projects merit a follow up and extension? Where are the combinations or synergy effects to be attended? Which themes and topics should be elaborated in new research projects? Who should be involved and integrated in future research projects (stakeholders, authorities, etc.)? The CARONTE consortium includes universities and research institutes, companies, and end-users providing with experience in research and consultancy in transportation, logistics, infrastructure management, security and communications. ITENE - Instituto Tecnológico del Embalaje, Transporte y Logística-has been one of the Project partners among a total of 11 members from eight different countries in the European Union which have also been supported via a High Level Advisory Board. (Author)

Automated transportation management system (ATMS) software project management plan (SPMP)

Energy Technology Data Exchange (ETDEWEB)

Weidert, R.S., Westinghouse Hanford

1996-05-20

The Automated Transportation Management System (ATMS) Software Project Management plan (SPMP) is the lead planning document governing the life cycle of the ATMS and its integration into the Transportation Information Network (TIN). This SPMP defines the project tasks, deliverables, and high level schedules involved in developing the client/server ATMS software.

Subsonic flow past three-dimensional localised heating elements in boundary layers

Energy Technology Data Exchange (ETDEWEB)

Aljohani, A F [Department of Mathematics, Faculty of Science, University of Tabuk (Saudi Arabia); Gajjar, J S B, E-mail: j.gajjar@manchester.ac.uk [School of Mathematics, University of Manchester, Manchester M13 9PL (United Kingdom)

2017-12-15

The problem of subsonic flow past three-dimensional micro-electro-mechanical-type (MEMS-type) heating elements placed on a flat surface, where the MEMS devices have hump-shaped surfaces, is investigated using the triple-deck theory. The compressible Navier–Stokes equations supplemented by the energy equation are considered in the limit when the Reynolds number is large. The dimensions of the MEMS devices considered are such that the flow perturbations are governed by the three-dimensional subsonic triple-deck equations formulated with the aid of method of matched expansions. The linear analysis of these equations is presented and our results provide an insight into how the MEMS heating elements may be used to positively control the local flow properties. (paper)

Large-Scale V/STOL Experimental Investigations of an Ejector-Lift Fighter and a Twin Tilt-Nacelle Transport

Science.gov (United States)

Dudley, Michael R.

2016-01-01

In the 1980s NASA Aeronautics was actively involved in full-scale wind tunnel testing of promising VSTOL aircraft concepts. This presentation looks at two, a multi-role fighter and a subsonic tactical transport. Their strengths and weaknesses are discussed with some of the rationale that ultimately led to the selection of competing concepts for production, namely the V-22 Osprey and the F-35 Lightning. The E7-A STOVL multi-role fighter was the product of an aircraft development program in the late 1980s by NASA, the Defense Advanced Research Projects Agency (DARPA), the Canadian Department of Industry Science and Technology (DIST), and industry partners General Dynamics and Boeing Dehavilland. The program was conducted an in response to increasing US-UK interest in supersonic STOVL fighters. The objective was to design an aircraft that could replace most existing close air support-air combat fighters with a single aircraft that had some of the qualities of an air superiority fighter and the deployment flexibility of a VSTOL aircraft. The resulting E7-A concept was a delta-wing supersonic fighter that used a fuselage-mounted thrust augmenting ejector and a ventral deflecting jet nozzle for vertical lift. The Grumman Aircraft Company, the Navy, and NASA developed the Design-698 (D-698) subsonic tactical transport in response to the Navy's Type A VSTOL utility aircraft requirement. The objective was to develop a subsonic utility transport with the operational flexibility of a helicopter, but with greater speed and range. The D-698 employs two high-bypass turbofan engines mounted on a dumbbell that rotates through ninety degrees for vertical takeoff and cruise flight. Movable vanes positioned in the exhaust flow provide control in hover with the need for reaction control jets. The presentations concluding comments suggest that technology advances in the last thirty-years may justify the value of revisiting some of these concepts.

Use of GIS technologies to facilitate the transportation project programming process.

Science.gov (United States)

2008-05-01

Transportation project programming in a transportation agency is a process of matching : potential projects with available funds to accomplish the agencys mission and goals of a : given period of time. Result of this process is normally a transpor...

Salt Repository Project transportation program plan

International Nuclear Information System (INIS)

Fisher, R.L.; Greenberg, A.H.; Anderson, T.L.; Yates, K.R.

1987-01-01

The Salt Repository Project (SRP) has the responsibility to develop a comprehensive transportation program plan (TrPP) that treats the transportation of workers, supplies, and high-level radioactive waste to the site and the transportation of salt, low-level, and transuranic wastes from the site. The TrPP has developed a systematic approach to transportation which is directed towards satisfying statutes, regulations, and directives and is guided by a hierarchy of specific functional requirements, strategies, plans, and reports. The TrPP identifies and develops the planning process for transportation-related studies and provides guidance to staff in performing and documenting these activities. The TrPP also includes an explanation of the responsibilities of the organizational elements involved in these transportation studies. Several of the report chapters relate to identifying routes for transporting nuclear waste to the site. These include a chapter on identifying an access corridor for a new rail route leading to the site, identifying and evaluating emergency-response preparedness capabilities along candidate routes in the state, and identifying alternative routes from the state border, ports, or in-state reactors to the site. The TrPP also includes plans for identifying salt disposal routes and a discussion of repository/transportation interface requirements. 89 refs., 6 figs

Prioritising transport infrastructure projects: towards a multi-criterion ...

African Journals Online (AJOL)

Kirstam

multi-criterion analysis (MCA), partial equilibrium analysis, project appraisal ... In the case of transport infrastructure projects, though, this is no mean ... vehicle ownership and mileage-based depreciation (an improved road network and/ .... urban, rural or regional development initiatives – they typically include one or more.

Prioritising transport infrastructure projects: Towards a multi-criterion ...

African Journals Online (AJOL)

Southern African Business Review ... systematic framework for the appraisal of transport infrastructure projects of the type 'budget cycle projects with local ... Cost/benefit analysis, when applied in a classic sense, is not suitable for this purpose, given its ... (optimal allocation of resources), equity (impact distribution aspects),

Assessment of Transport Projects: Risk Analysis and Decision Support

DEFF Research Database (Denmark)

Salling, Kim Bang

2008-01-01

functions. New research proved that specifically two impacts stood out in transport project assessment, namely, travel time savings and construction costs. The final concern of this study has been the fitting of distributions, e.g. by the use of data from major databases developed in which Optimism Bias...... choosing probability distributions and performing real term data fits. The perspective of this Ph.D. study presents newer and better understanding of assigning risks within assessment of transport projects....

Performativity and the project: enacting urban transport security in Europe

NARCIS (Netherlands)

Hoijtink, M.

2015-01-01

In April 2011, a large consortium of European rail and security suppliers, transport operators and research organisations launched the Secured Urban Transportation - European Demonstration (SECUR-ED) project with the objective of providing public transport operators with the means to enhance urban

A portfolio evaluation framework for air transportation improvement projects

Science.gov (United States)

Baik, Hyeoncheol

This thesis explores the application of portfolio theory to the Air Transportation System (ATS) improvement. The ATS relies on complexly related resources and different stakeholder groups. Moreover, demand for air travel is significantly increasing relative to capacity of air transportation. In this environment, improving the ATS is challenging. Many projects, which are defined as technologies or initiatives, for improvement have been proposed and some have been demonstrated in practice. However, there is no clear understanding of how well these projects work in different conditions nor of how they interact with each other or with existing systems. These limitations make it difficult to develop good project combinations, or portfolios that maximize improvement. To help address this gap, a framework for identifying good portfolios is proposed. The framework can be applied to individual projects or portfolios of projects. Projects or portfolios are evaluated using four different groups of factors (effectiveness, time-to-implement, scope of applicability, and stakeholder impacts). Portfolios are also evaluated in terms of interaction-determining factors (prerequisites, co-requisites, limiting factors, and amplifying factors) because, while a given project might work well in isolation, interdependencies between projects or with existing systems could result in lower overall performance in combination. Ways to communicate a portfolio to decision makers are also introduced. The framework is unique because (1) it allows using a variety of available data, and (2) it covers diverse benefit metrics. For demonstrating the framework, an application to ground delay management projects serves as a case study. The portfolio evaluation approach introduced in this thesis can aid decision makers and researchers at universities and aviation agencies such as Federal Aviation Administration (FAA), National Aeronautics and Space Administration (NASA), and Department of Defense (DoD), in

Use of ethanol in public urban transport: BEST (BioEthanol for Sustainable Transport) Project; Uso de etanol no transporte publico urbano: projeto BEST (Bio Ethanol para o Transporte Sustentavel)

Energy Technology Data Exchange (ETDEWEB)

Moreira, Jose Roberto; Apolinario, Sandra; Pecora, Vanessa [Universidade de Sao Paulo (CENBIO/USP), SP (Brazil). Inst. de Eletrotecnica e Energia. Centro Nacional de Referencia em Biomassa; Velazquez, Silvia [Universidade Presbiteriana Mackenzie, Sao Paulo, SP (Brazil)

2008-07-01

This paper present the BEST project - Bio Ethanol for Sustainable Transport, that aims to promote the ethanol usage, replacing diesel, in the urban public transport in Brazil and worldwide. Apart from Sao Paulo, leading city in the Americas, another eight cities located in Europe and Asia takes part in the project. One of the Brazilian project's goals is to evaluate ethanol usage as diesel fuel replacement in public transport buses by comparatively following the operational output of the experimental fleet, taking as reference an equivalent diesel bus. The utilized test vehicles will be evaluated and monitored to demonstrate ethanol energetic efficiency and, after the results the BEST project and the European Union will set a blue print for public policies to incentive ethanol usage in the urban public transport. The results will allow identifying technical and economical barriers that will eventually overlap the viability process of this technology in the Brazilian public transport. (author)

Use of ethanol in public urban transport: BEST (BioEthanol for Sustainable Transport) Project; Uso de etanol no transporte publico urbano: projeto BEST (Bio Ethanol para o Transporte Sustentavel)

Energy Technology Data Exchange (ETDEWEB)

Moreira, Jose Roberto; Apolinario, Sandra; Pecora, Vanessa [Universidade de Sao Paulo (CENBIO/USP), SP (Brazil). Inst. de Eletrotecnica e Energia. Centro Nacional de Referencia em Biomassa; Velazquez, Silvia [Universidade Presbiteriana Mackenzie, Sao Paulo, SP (Brazil)

2008-07-01

This paper present the BEST project - Bio Ethanol for Sustainable Transport, that aims to promote the ethanol usage, replacing diesel, in the urban public transport in Brazil and worldwide. Apart from Sao Paulo, leading city in the Americas, another eight cities located in Europe and Asia takes part in the project. One of the Brazilian project's goals is to evaluate ethanol usage as diesel fuel replacement in public transport buses by comparatively following the operational output of the experimental fleet, taking as reference an equivalent diesel bus. The utilized test vehicles will be evaluated and monitored to demonstrate ethanol energetic efficiency and, after the results the BEST project and the European Union will set a blue print for public policies to incentive ethanol usage in the urban public transport. The results will allow identifying technical and economical barriers that will eventually overlap the viability process of this technology in the Brazilian public transport. (author)

Baseline projections of transportation energy consumption by mode: 1981 update

Energy Technology Data Exchange (ETDEWEB)

Millar, M; Bunch, J; Vyas, A; Kaplan, M; Knorr, R; Mendiratta, V; Saricks, C

1982-04-01

A comprehensive set of activity and energy-demand projections for each of the major transportation modes and submodes is presented. Projections are developed for a business-as-usual scenario, which provides a benchmark for assessing the effects of potential conservation strategies. This baseline scenario assumes a continuation of present trends, including fuel-efficiency improvements likely to result from current efforts of vehicle manufacturers. Because of anticipated changes in fuel efficiency, fuel price, modal shifts, and a lower-than-historic rate of economic growth, projected growth rates in transportation activity and energy consumption depart from historic patterns. The text discusses the factors responsible for this departure, documents the assumptions and methodologies used to develop the modal projections, and compares the projections with other efforts.

Transportation engineering project management : survey of practice.

Science.gov (United States)

2017-01-01

Utah Department of Transportation (UDOT) project managers (PMs) have identified inefficiencies in the legacy : system electronic Program Management (ePM) used to manage consultant contracts and invoices. To help UDOT : prepare for potential system im...

Subsonic islands within a high-mass star-forming infrared dark cloud

Science.gov (United States)

Sokolov, Vlas; Wang, Ke; Pineda, Jaime E.; Caselli, Paola; Henshaw, Jonathan D.; Barnes, Ashley T.; Tan, Jonathan C.; Fontani, Francesco; Jiménez-Serra, Izaskun; Zhang, Qizhou

2018-03-01

High-mass star forming regions are typically thought to be dominated by supersonic motions. We present combined Very Large Array and Green Bank Telescope (VLA+GBT) observations of NH3 (1,1) and (2,2) in the infrared dark cloud (IRDC) G035.39-00.33, tracing cold and dense gas down to scales of 0.07 pc. We find that, in contrast to previous, similar studies of IRDCs, more than a third of the fitted ammonia spectra show subsonic non-thermal motions (mean line width of 0.71 km s-1), and sonic Mach number distribution peaks around ℳ = 1. As possible observational and instrumental biases would only broaden the line profiles, our results provide strong upper limits to the actual value of ℳ, further strengthening our findings of narrow line widths. This finding calls for a re-evaluation of the role of turbulent dissipation and subsonic regions in massive-star and cluster formation. Based on our findings in G035.39, we further speculate that the coarser spectral resolution used in the previous VLA NH3 studies may have inhibited the detection of subsonic turbulence in IRDCs. The reduced turbulent support suggests that dynamically important magnetic fields of the 1 mG order would be required to support against possible gravitational collapse. Our results offer valuable input into the theories and simulations that aim to recreate the initial conditions of high-mass star and cluster formation.

Reference Scenario Forecasting: A New Approach to Transport Project Assessment

DEFF Research Database (Denmark)

Salling, Kim Bang; Leleur, Steen; Skougaard, Britt Zoëga

2010-01-01

This paper presents a new approach to transport project assessment in terms of feasibility risk assessment and reference class forecasting. Normally, transport project assessment is based upon a cost-benefit approach where evaluation criteria such as net present values are obtained. Recent research...... construction cost estimates. Hereafter, a quantitative risk analysis is provided making use of Monte Carlo simulation. This stochastic approach facilitates random input parameters based upon reference class forecasting, hence, a parameter data fit has been performed in order to obtain validated probability...... forecasting (RSF) frame. The RSF is anchored in the cost-benefit analysis (CBA), thus, it provides decision-makers with a quantitative mean of assessing the transport infrastructure project. First, the RSF method introduces uncertainties within the CBA by applying Optimism Bias uplifts on the preliminary...

Maintaining project consistency with transportation plans throughout the project life cycle with an emphasis on maintaining air quality conformity: technical report.

Science.gov (United States)

2016-07-01

Federal and state transportation planning statutory and regulatory laws require transportation projects to be : consistent with transportation plans and improvement programs before a federal action can be taken on a : project requiring one. Significa...

Conceptual Design and Cost Estimate of a Subsonic NASA Testbed Vehicle (NTV) for Aeronautics Research

Science.gov (United States)

Nickol, Craig L.; Frederic, Peter

2013-01-01

A conceptual design and cost estimate for a subsonic flight research vehicle designed to support NASA's Environmentally Responsible Aviation (ERA) project goals is presented. To investigate the technical and economic feasibility of modifying an existing aircraft, a highly modified Boeing 717 was developed for maturation of technologies supporting the three ERA project goals of reduced fuel burn, noise, and emissions. This modified 717 utilizes midfuselage mounted modern high bypass ratio engines in conjunction with engine exhaust shielding structures to provide a low noise testbed. The testbed also integrates a natural laminar flow wing section and active flow control for the vertical tail. An eight year program plan was created to incrementally modify and test the vehicle, enabling the suite of technology benefits to be isolated and quantified. Based on the conceptual design and programmatic plan for this testbed vehicle, a full cost estimate of $526M was developed, representing then-year dollars at a 50% confidence level.

76 FR 4150 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2011-01-24

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Notice of Limitation on Claims Against Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... public transportation project will be barred unless the claim is filed on or before July 25, 2011. FOR...

76 FR 55470 - Notice of Limitation on Claims Against Proposed Public Transportation Project

Science.gov (United States)

2011-09-07

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Notice of Limitation on Claims Against Proposed Public Transportation Project AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... announced herein for the listed public transportation project will be barred unless the claim is filed on or...

Models of Financing and Available Financial Resources for Transport Infrastructure Projects

Directory of Open Access Journals (Sweden)

O. Pokorná

2001-01-01

Full Text Available A typical feature of transport infrastructure projects is that they are expensive and take a long time to construct. Transport infrastructure financing has traditionally lain in the public domain. A tightening of many countries' budgets in recent times has led to an exploration of alternative resources for financing transport infrastructures. A variety of models and methods can be used in transport infrastructure project financing. The selection of the appropriate model should be done taking into account not only financial resources but also the distribution of construction and operating risks and the contractual relations between the stakeholders.

An Overview of NASA's Subsonic Research Aircraft Testbed (SCRAT)

Science.gov (United States)

Baumann, Ethan; Hernandez, Joe; Ruhf, John C.

2013-01-01

National Aeronautics and Space Administration Dryden Flight Research Center acquired a Gulfstream III (GIII) aircraft to serve as a testbed for aeronautics flight research experiments. The aircraft is referred to as SCRAT, which stands for SubsoniC Research Aircraft Testbed. The aircraft's mission is to perform aeronautics research; more specifically raising the Technology Readiness Level (TRL) of advanced technologies through flight demonstrations and gathering high-quality research data suitable for verifying the technologies, and validating design and analysis tools. The SCRAT has the ability to conduct a range of flight research experiments throughout a transport class aircraft's flight envelope. Experiments ranging from flight-testing of a new aircraft system or sensor to those requiring structural and aerodynamic modifications to the aircraft can be accomplished. The aircraft has been modified to include an instrumentation system and sensors necessary to conduct flight research experiments along with a telemetry capability. An instrumentation power distribution system was installed to accommodate the instrumentation system and future experiments. An engineering simulation of the SCRAT has been developed to aid in integrating research experiments. A series of baseline aircraft characterization flights has been flown that gathered flight data to aid in developing and integrating future research experiments. This paper describes the SCRAT's research systems and capabilities.

Transport of nuclear materials as an international project

International Nuclear Information System (INIS)

Bartejsova, Eva

2010-01-01

The following companies are involved in this project: CEZ a.s., ALTA a.s., ALTA 32 s.r.o., DMS s.r.o., TVEL (RF), and NUKLON (RF). Transport containers are TK-S5 (for Temelin) and TK-S55 (for Dukovany) types. Details of fuel supplies for the 2 Czech NPPs are described and the fresh fuel element transport procedure is highlighted. (P.A.)

The Analysis of Project Finance: a Case Study of Kazakhstan Caspian Transportation System Project

OpenAIRE

Serikbayeva, Aigul

2011-01-01

Although project finance is a large and fast growing field in finance, there has been very little academic research in that area. The main reason for this deficit is that it is a relatively new sphere in finance and it is difficult to access the information about the implementation of projects from the companies that implement them. This project will provide an overview of how companies finance large infrastructure projects through a case study of the Kazakhstan Caspian Transportation System ...

Fully unsteady subsonic and supersonic potential aerodynamics for complex aircraft configurations for flutter applications

Science.gov (United States)

Tseng, K.; Morino, L.

1975-01-01

A general theory for study, oscillatory or fully unsteady potential compressible aerodynamics around complex configurations is presented. Using the finite-element method to discretize the space problem, one obtains a set of differential-delay equations in time relating the potential to its normal derivative which is expressed in terms of the generalized coordinates of the structure. For oscillatory flow, the motion consists of sinusoidal oscillations around a steady, subsonic or supersonic flow. For fully unsteady flow, the motion is assumed to consist of constant subsonic or supersonic speed for time t or = 0 and of small perturbations around the steady state for time t 0.

Numerical Calculation of Interaction Between Plane Jet and Subsonic Flow

Directory of Open Access Journals (Sweden)

V. O. Moskalenko

2016-01-01

Full Text Available The paper makes numerical calculation of interaction between plane jet and subsonic flow. Its aim is to determine the jet trajectory, velocity profiles, distribution of pressure coefficient on the plate surface at different jet angles, namely ωj=45°; 90°; 105° and at low blowing strengths ( ≤1.5 as well as a to make comparison with the experimental data of other authors.To simulate a two-dimensional jet in the subsonic flow the software package “CAD SolidWorks Flow Simulation” has been used. Initially, the test task was solved with its calculation results compared with experimental ones [6.8] in order to improve the convergence; the size of the computational domain and a computational grid within the k-ε turbulence model were selected. As a result of the calculation, were identified and analysed the pressure values, jet trajectories, and velocity profiles. In the graphs the solid lines show calculation results, and dots represent experimental data.From the calculation results it is seen that, with increasing intensity of the reduced mass flow ¯q in the above range, the change of the jet pressure coefficient p¯ distribution behind a slotted nozzle is almost linear and significant. Before the nozzle, with increasing ¯q the pressure coefficient increases slightly.Analysis of results has shown that blowing of jets with ωj>90ω, provides a greater perturbation of the subsonic flow. Thus, the jet penetrates into the flow deeper, forms a dead region of the greater length, and more significantly redistributes the pressure coefficient on the surface of the plate.The calculation results are in good compliance with the experimental data both for the jet axis and for the pressure coefficient distribution on the plate surface. The research results can be used in the designing the jet control of aircrafts.

How can innovative project delivery systems improve the overall efficiency of GDOT in transportation project delivery?

Science.gov (United States)

2013-04-01

The USDOT and Federal Highway Administration (FHWA) recommend the smart use of innovative project : delivery systems, such as design-build, to improve efficiency and effectiveness of developing transportation : projects. Although design-build provide...

76 FR 78332 - Amended Notice of Limitation on Claims Against Proposed Public Transportation Project

Science.gov (United States)

2011-12-16

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Amended Notice of Limitation on Claims Against Proposed Public Transportation Project AGENCY: Federal Transit Administration (FTA), DOT. ACTION... actions announced herein for the listed public transportation project will be barred unless the claim is...

77 FR 51106 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2012-08-23

... Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... claim seeking judicial review of the FTA actions announced herein for the listed public transportation... given that FTA has taken final agency actions by issuing certain approvals for the public transportation...

77 FR 34122 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2012-06-08

... Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... claim seeking judicial review of the FTA actions announced herein for the listed public transportation... given that FTA has taken final agency actions by issuing certain approvals for the public transportation...

Public Transportation System at the Southern Cone: New projects

Directory of Open Access Journals (Sweden)

Mariana Schweitzer

2002-07-01

Full Text Available In the context of the international restructuration of the economy and the regional integration process, according to the claim of accelerating the trade circulation, there is emerging a kind of transporting subestructure project with different characteristics from other times, which are producing a new territorial configuration.The present study has the objective to analyze the evolution of the transportation system in the South Cone and, in the context of the integration process and the economic restructuration, the new demans and which are the transformations of the involved territories since the concretion of this new actions. It is analyzed the regional transportation system related to the territory estructuration in those countries integrating the Mercosur (Argentina, Brasil, Uruguay and Paraguay, as well as in the associated nations (Bolivia and Chile.Based on the relief and diagnosis of the situation, and considering those new projects, we make a reflection about the tendency to reconcentrate the subestructure and the inversions, with the following territorial inequality that gets deeper and reproduces the territorial fragmentation in regions that receive the new projects obeying to external goals without considering the global impact in the territories’ group.

Advanced Air Transportation Technologies Project, Final Document Collection

Science.gov (United States)

Mogford, Richard H.; Wold, Sheryl (Editor)

2008-01-01

This CD ROM contains a compilation of the final documents of the Advanced Air Transportation Technologies (AAIT) project, which was an eight-year (1996 to 2004), $400M project managed by the Airspace Systems Program office, which was part of the Aeronautics Research Mission Directorate at NASA Headquarters. AAIT focused on developing advanced automation tools and air traffic management concepts that would help improve the efficiency of the National Airspace System, while maintaining or enhancing safety. The documents contained in the CD are final reports on AAIT tasks that serve to document the project's accomplishments over its eight-year term. Documents include information on: Advanced Air Transportation Technologies, Autonomous Operations Planner, Collaborative Arrival Planner, Distributed Air/Ground Traffic Management Concept Elements 5, 6, & 11, Direct-To, Direct-To Technology Transfer, Expedite Departure Path, En Route Data Exchange, Final Approach Spacing Tool - (Active and Passive), Multi-Center Traffic Management Advisor, Multi Center Traffic Management Advisor Technology Transfer, Surface Movement Advisor, Surface Management System, Surface Management System Technology Transfer and Traffic Flow Management Research & Development.

Experimental Flight Characterization of a Canard-Controlled, Subsonic Missile

Science.gov (United States)

2017-08-01

Frankfort mount was used to place the gun between stations 5 and 6 in the spark range building. The propelling charge was contained within a plastic ...additive manufacturing housing and used 83 g of M38 propellant with about 2 g of black powder wrapped around an electric match. A shot-start link was...ARL-TR-8086 ● AUG 2017 US Army Research Laboratory Experimental Flight Characterization of a Canard-Controlled, Subsonic Missile

What Causes Cost Overrun in Transport Infrastructure Projects?

DEFF Research Database (Denmark)

Flyvbjerg, Bent; Holm, Mette K. Skamris; Buhl, Søren L.

cost escalation for three types of project ownership - private, state-owned enterprise and other public ownership - it is shown that the oft-seen claim that public ownership is problematic and private ownership effective in curbing cost escalation is an oversimplification. Type of accountability......This article presents results from the first statistically significant study of causes of cost escalation in transport infrastructure projects. The study is based on a sample of 258 rail, bridge, tunnel and roads projects worth US$90 billion. The focus is on the dependence of cost escalation on (1......) length of project implementation phase, (2) size of project and (3) type of project ownership. First, it is found with very high statistical significance that cost escalation is strongly dependent on length of implementation phase. The policy implications are clear: Decision makers and planners should...

78 FR 26112 - Limitation on Claims Against Proposed Public Transportation Projects; Correction

Science.gov (United States)

2013-05-03

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Limitation on Claims Against Proposed Public Transportation Projects; Correction AGENCY: Federal Transit Administration (FTA), DOT. ACTION... Register on April 22, 2013, concerning a limitation on claims for certain specified public transportation...

Subsonic Glideback Rocket Demonstrator Flight Testing

Science.gov (United States)

DeTurris, Dianne J.; Foster, Trevor J.; Barthel, Paul E.; Macy, Daniel J.; Droney, Christopher K.; Talay, Theodore A. (Technical Monitor)

2001-01-01

For the past two years, Cal Poly's rocket program has been aggressively exploring the concept of remotely controlled, fixed wing, flyable rocket boosters. This program, embodied by a group of student engineers known as Cal Poly Space Systems, has successfully demonstrated the idea of a rocket design that incorporates a vertical launch pattern followed by a horizontal return flight and landing. Though the design is meant for supersonic flight, CPSS demonstrators are deployed at a subsonic speed. Many steps have been taken by the club that allowed the evolution of the StarBooster prototype to reach its current size: a ten-foot tall, one-foot diameter, composite material rocket. Progress is currently being made that involves multiple boosters along with a second stage, third rocket.

Technical needs and research opportunities provided by projected aeronautical and space systems

Science.gov (United States)

Noor, Ahmed K.

1992-01-01

The overall goal of the present task is to identify the enabling and supporting technologies for projected aeronautical and space systems. A detailed examination was made of the technical needs in the structures, dynamics and materials areas required for the realization of these systems. Also, the level of integration required with other disciplines was identified. The aeronautical systems considered cover the broad spectrum of rotorcraft; subsonic, supersonic and hypersonic aircraft; extremely high-altitude aircraft; and transatmospheric vehicles. The space systems considered include space transportation systems; spacecrafts for near-earth observation; spacecrafts for planetary and solar exploration; and large space systems. A monograph is being compiled which summarizes the results of this study. The different chapters of the monograph are being written by leading experts from governmental laboratories, industry and universities.

Los Angeles County Metropolitan Transportation Authority climate change adaptation pilot project report.

Science.gov (United States)

2013-08-01

This Climate Change Adaptation Pilot Project Report details the project background of the recently-completed Los Angeles County : Metropolitan Transportation Authority (Metro) Transit Climate Change Adaptation Pilot Project as well as the various wor...

Analysis of preconditioning and multigrid for Euler flows with low-subsonic regions

NARCIS (Netherlands)

Koren, B.; Leer, van B.

1995-01-01

For subsonic flows and upwind-discretized, linearized 1-D Euler equations, the smoothing behavior of multigrid-accelerated point Gauss-Seidel relaxation is analyzed. Error decay by convection across domain boundaries is also discussed. A fix to poor convergence rates at low Mach numbers is sought in

Saturated Zone Flow and Transport Expert Elicitation Project

Energy Technology Data Exchange (ETDEWEB)

Coppersmith, Kevin J.; Perman, Roseanne C.

1998-01-01

This report presents results of the Saturated Zone Flow and Transport Expert Elicitation (SZEE) project for Yucca Mountain, Nevada. This project was sponsored by the US Department of Energy (DOE) and managed by Geomatrix Consultants, Inc. (Geomatrix), for TRW Environmental Safety Systems, Inc. The DOE's Yucca Mountain Site Characterization Project (referred to as the YMP) is intended to evaluate the suitability of the site for construction of a mined geologic repository for the permanent disposal of spent nuclear fuel and high-level radioactive waste. The SZEE project is one of several that involve the elicitation of experts to characterize the knowledge and uncertainties regarding key inputs to the Yucca Mountain Total System Performance Assessment (TSPA). The objective of the current project was to characterize the uncertainties associated with certain key issues related to the saturated zone system in the Yucca Mountain area and downgradient region. An understanding of saturated zone processes is critical to evaluating the performance of the potential high-level nuclear waste repository at Yucca Mountain. A major goal of the project was to capture the uncertainties involved in assessing the saturated flow processes, including uncertainty in both the models used to represent the physical processes controlling saturated zone flow and transport, and the parameter values used in the models. So that the analysis included a wide range of perspectives, multiple individual judgments were elicited from members of an expert panel. The panel members, who were experts from within and outside the Yucca Mountain project, represented a range of experience and expertise. A deliberate process was followed in facilitating interactions among the experts, in training them to express their uncertainties, and in eliciting their interpretations. The resulting assessments and probability distributions, therefore, provide a reasonable aggregate representation of the knowledge and

Aviation safety and automation technology for subsonic transports

Science.gov (United States)

Albers, James A.

1991-01-01

Discussed here are aviation safety human factors and air traffic control (ATC) automation research conducted at the NASA Ames Research Center. Research results are given in the areas of flight deck and ATC automations, displays and warning systems, crew coordination, and crew fatigue and jet lag. Accident investigation and an incident reporting system that is used to guide the human factors research is discussed. A design philosophy for human-centered automation is given, along with an evaluation of automation on advanced technology transports. Intelligent error tolerant systems such as electronic checklists are discussed along with design guidelines for reducing procedure errors. The data on evaluation of Crew Resource Management (CRM) training indicates highly significant positive changes in appropriate flight deck behavior and more effective use of available resources for crew members receiving the training.

Maintaining project consistency with transportation plans throughout the project life cycle with an emphasis on maintaining air quality conformity.

Science.gov (United States)

2014-11-01

This document was developed for transportation professionals responsible for project : development and has three basic goals: : 1. Define project consistency and identify the causes of project inconsistencies and the : critical junctures in the proje...

Experimentally Studied Influence of the Bullet Head Shape on Dispersion Characteristics at Subsonic Airspeeds

Directory of Open Access Journals (Sweden)

S. N. Ilukhin

2015-01-01

Full Text Available The article presents description and results of experiments on a ballistic track and subsonic wind tunnel. The subject of study is important an issue such as the assessment of the influence of the bullet head shape on the accuracy of shooting parameters at subsonic muzzle velocity. The article points to the features of examined precision of guided and unguided aircraft, refers to the main disturbing factors. In addition, it outlines the most well known ways to improve the flight precision of unguided munitions. The article presents the geometric parameters of bullets and their scale models used in the experiments. It describes the experimental facilities and the studies themselves. Particular attention is paid to the analysis of experimental air-gun firings. Results for different muzzle velocities of flight are compared. The paper notes an ambiguity in comparison of accuracy and head drag coefficient. The results are clearly aligned with the data purging in the little turbulent subsonic wind tunnel. The article describes in detail the use of the method for visualizing a structure of the flow for the delimitation of attached flow and estimation of stagnation zone. A revealed physical picture has comprehensive theoretical underpinning. The conclusions of the work also give a advices on selecting a bullet to have the best dispersion parameters.

Indicators and beyond: Assessing the sustainability of transport projects

DEFF Research Database (Denmark)

Cornet, Yannick

2016-01-01

on the topic of sustainable transport indicator frameworks. Case study work draws upon extensive desktop-based analysis of impact assessment reports and other publically available material about real cases of large transport infrastructure appraisals. The HS2 high-speed rail (HSR) project appraisal in the UK......Credibly demonstrating actual progress towards a genuinely sustainable transport situation remains a challenge. A key problem is that the incorporation of sustainability in transport policy and planning at present is not systematic. A motivating assumption behind this thesis is that a transition...... toward a sustainable transport system will require strong support from decision-support processes and assessment tools that do not only adopt the language of sustainability, but fully integrate an explicit notion of sustainability in all of their conceptual, operational and procedural approaches...

Emission projections of the transport Sector in China: 2015-2040

Science.gov (United States)

Yan, L.

2016-12-01

Driven by the significant growth freight and passenger transport demand, transport sector has become a sector that is largely responsible for increases in emissions of atmospheric pollutants (NOx, CO, HC, PM2.5) in China. Figuring out the emission trend in China's transport sector has great influence on formulating emission reduction measures in the future. In this work, both on-road and off-road transport emissions in China were estimated from 2015 to 2040 for CO, NOx, HC and PM2.5. The projection was conducted based on on the energy consumption structure forecast from IEA (International Energy Agency), the future national average annual distance traveled per vehicle and fuel consumption per distance derived from simulation results of the Fuel Economy and Environmental Impact (FEEI) model. The results show that the ownership of on-road vehicles in China increases rapidly during 2015 to 2030 and then the growth slows down. Finally, the total amount reaches up to 522 million in 2040 in which 84.5% turns out to be light-duty vehicles. Because current control legislations for the transport sector in China will continue to be strengthened in the future, the total emissions of China's transport sector were projected to peak around 2030, due to the improvement of vehicle emission standard and the retirement of old vehicles are the most effective measures. The off-road transport will become the main contributor to emissions from transport sector in China since 2030. This work provides a new perspective to understand emissions from both on-road and off-road transport in China, which can support the achievement of improving air quality promised by the Chinese government. This work provides a new perspective to understand the emission trends of on-road and off-road transport sector in China from 2015 to 2040, which can support the achievement of the air quality goal promised by the Chinese government. Driven by the significant growth freight and passenger transport demand

Transport Corridors in the Russian Integration Projects, the Case of the Eurasian Economic Union

Directory of Open Access Journals (Sweden)

Olga A. Podberezkina

2015-01-01

Full Text Available The article discusses the political importance of transport corridors in terms of the development of integration projects in the post-Soviet space. The world is witnessing the formation of a single market and transport and communication infrastructure, which intensifies competition among regional and world leaders, both states and non-state actors, such as businesses, markets over the routes of transporting goods. In the medium and long term the value of the control over the transport routes will increase due to the dynamics of economic development in the Asia-Pacific region. Competition for the development of projects of international transport corridors (ITC between the leading countries in the region will increase, because the ITC entail the formation of a common political space, the reduction of tariff and customs barriers, which provides easy access to the markets of countries linked by ITCs and creates the preconditions for economic integration. The growing political importance of ITC is reflected in the fact that global leaders such as China, the US, the EU, are trying to create their own versions of international land transport corridors connecting Europe and Asia. China is trying to promote their transport project "Economic Belt Silk Road" European countries develop cooperation on ITC TRACECA with other countries of Eurasia. US also embody their interests through the implementation of the project by the ITC in Afghanistan. Transport corridors in Russia are seen as a way to integrate it into the global transportation system and logistics space. To do this, Russia needs to develop Eurasian transport corridors through its territory. As a result of the implementation of transport projects Russia will be able to ensure the transit of goods from China to Europe, which has a positive impact on the economic development of the regions through which they pass. Development of international transportation through Russia will unite many of the

Cost-Benefit Analysis for Investment Decisions: Chapter 16 (Cost-Benefit Analysis of Transportation Projects)

OpenAIRE

Glenn Jenkins; Chun-Yan Kuo; Arnold C. Harberger

2011-01-01

This chapter will focus on the problems of evaluating transportation projects in the context of the less-developed countries. Emphasis will be placed on highway projects, because these account for the bulk of transport investments in the developing parts of the world. If a project passes a straight financial test, based on the present value of its cash inflows and outflows, projects would only come if this financial NPV were outweighed by the present value of the project’s various externali...

Three Dimensional Steady Subsonic Euler Flows in Bounded Nozzles

OpenAIRE

Chen, Chao; Xie, Chunjing

2013-01-01

In this paper, we study the existence and uniqueness of three dimensional steady Euler flows in rectangular nozzles when prescribing normal component of momentum at both the entrance and exit. If, in addition, the normal component of the voriticity and the variation of Bernoulli's function at the exit are both zero, then there exists a unique subsonic potential flow when the magnitude of the normal component of the momentum is less than a critical number. As the magnitude of the normal compon...

Hydrogen chloride heterogeneous chemistry on frozen water particles in subsonic aircraft plume. Laboratory studies and modelling

Energy Technology Data Exchange (ETDEWEB)

Persiantseva, N.V.; Popovitcheva, O.B.; Rakhimova, T.V. [Moscow State Univ. (Russian Federation)

1997-12-31

Heterogeneous chemistry of HCl, as a main reservoir of chlorine content gases, has been considered after plume cooling and ice particle formation. The HCl, HNO{sub 3}, N{sub 2}O{sub 5} uptake efficiencies by frozen water were obtained in a Knudsen-cell flow reactor at the subsonic cruise conditions. The formation of ice particles in the plume of subsonic aircraft is simulated to describe the kinetics of gaseous HCl loss due to heterogeneous processes. It is shown that the HCl uptake by frozen water particles may play an important role in the gaseous HCl depletion in the aircraft plume. (author) 14 refs.

Hydrogen chloride heterogeneous chemistry on frozen water particles in subsonic aircraft plume. Laboratory studies and modelling

Energy Technology Data Exchange (ETDEWEB)

Persiantseva, N V; Popovitcheva, O B; Rakhimova, T V [Moscow State Univ. (Russian Federation)

1998-12-31

Heterogeneous chemistry of HCl, as a main reservoir of chlorine content gases, has been considered after plume cooling and ice particle formation. The HCl, HNO{sub 3}, N{sub 2}O{sub 5} uptake efficiencies by frozen water were obtained in a Knudsen-cell flow reactor at the subsonic cruise conditions. The formation of ice particles in the plume of subsonic aircraft is simulated to describe the kinetics of gaseous HCl loss due to heterogeneous processes. It is shown that the HCl uptake by frozen water particles may play an important role in the gaseous HCl depletion in the aircraft plume. (author) 14 refs.

Variational formulation and projectional methods for the second order transport equation

International Nuclear Information System (INIS)

Borysiewicz, M.; Stankiewicz, R.

1979-01-01

Herein the variational problem for a second-order boundary value problem for the neutron transport equation is formulated. The projectional methods solving the problem are examined. The approach is compared with that based on the original untransformed form of the neutron transport equation

78 FR 16764 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2013-03-18

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Limitation on Claims Against Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... advising the public of final agency actions subject to Section 139(l) of Title 23, United States Code (U.S...

78 FR 4191 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2013-01-18

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Limitation on Claims Against Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... advising the public of final agency actions subject to Section 139(l) of Title 23, United States Code (U.S...

78 FR 33890 - Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2013-06-05

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Limitation on Claims Against Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice. SUMMARY... advising the public of final agency actions subject to Section 139(l) of Title 23, United States Code (U.S...

Efficient solutions to the Euler equations for supersonic flow with embedded subsonic regions

Science.gov (United States)

Walters, Robert W.; Dwoyer, Douglas L.

1987-01-01

A line Gauss-Seidel (LGS) relaxation algorithm in conjunction with a one-parameter family of upwind discretizations of the Euler equations in two dimensions is described. Convergence of the basic algorithm to the steady state is quadratic for fully supersonic flows and is linear for other flows. This is in contrast to the block alternating direction implicit methods (either central or upwind differenced) and the upwind biased relaxation schemes, all of which converge linearly, independent of the flow regime. Moreover, the algorithm presented herein is easily coupled with methods to detect regions of subsonic flow embedded in supersonic flow. This allows marching by lines in the supersonic regions, converging each line quadratically, and iterating in the subsonic regions, and yields a very efficient iteration strategy. Numerical results are presented for two-dimensional supersonic and transonic flows containing oblique and normal shock waves which confirm the efficiency of the iteration strategy.

Advanced transport systems analysis, modeling, and evaluation of performances

CERN Document Server

Janić, Milan

2014-01-01

This book provides a systematic analysis, modeling and evaluation of the performance of advanced transport systems. It offers an innovative approach by presenting a multidimensional examination of the performance of advanced transport systems and transport modes, useful for both theoretical and practical purposes. Advanced transport systems for the twenty-first century are characterized by the superiority of one or several of their infrastructural, technical/technological, operational, economic, environmental, social, and policy performances as compared to their conventional counterparts. The advanced transport systems considered include: Bus Rapid Transit (BRT) and Personal Rapid Transit (PRT) systems in urban area(s), electric and fuel cell passenger cars, high speed tilting trains, High Speed Rail (HSR), Trans Rapid Maglev (TRM), Evacuated Tube Transport system (ETT), advanced commercial subsonic and Supersonic Transport Aircraft (STA), conventionally- and Liquid Hydrogen (LH2)-fuelled commercial air trans...

On fluttering modes for aircraft wing model in subsonic air flow.

Science.gov (United States)

Shubov, Marianna A

2014-12-08

The paper deals with unstable aeroelastic modes for aircraft wing model in subsonic, incompressible, inviscid air flow. In recent author's papers asymptotic, spectral and stability analysis of the model has been carried out. The model is governed by a system of two coupled integrodifferential equations and a two-parameter family of boundary conditions modelling action of self-straining actuators. The Laplace transform of the solution is given in terms of the 'generalized resolvent operator', which is a meromorphic operator-valued function of the spectral parameter λ, whose poles are called the aeroelastic modes. The residues at these poles are constructed from the corresponding mode shapes. The spectral characteristics of the model are asymptotically close to the ones of a simpler system, which is called the reduced model. For the reduced model, the following result is shown: for each value of subsonic speed, there exists a radius such that all aeroelastic modes located outside the circle of this radius centred at zero are stable. Unstable modes, whose number is always finite, can occur only inside this 'circle of instability'. Explicit estimate of the 'instability radius' in terms of model parameters is given.

76 FR 46357 - Notice of Limitation on Claims Against Proposed Public Transportation Projects

Science.gov (United States)

2011-08-02

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Notice of Limitation on Claims Against Proposed Public Transportation Projects AGENCY: Federal Transit Administration (FTA), DOT. ACTION: Notice... that FTA has taken final agency actions by issuing certain approvals for the public transportation...

Can Maine metropolitan planning organizations (MPOs) finance transportation projects through bond financing?

Science.gov (United States)

2008-12-01

In January 2008 the Maine metropolitan planning organizations (MPOs) requested the Transportation : Research Division of the Maine Department of Transportation to conduct research to determine if it is : possible for MPOs to finance projects through ...

0-6758 : maintaining project consistency with transportation plans through the project life cycle with an emphasis on maintaining air quality conformity.

Science.gov (United States)

2014-03-01

Streamlined project delivery is a federally : mandated goal that the Texas Department of : Transportation (TxDOT) leadership supports to : achieve a more efficient and effective : transportation system in Texas. : Federal and state transportation pla...

Sensitivity analysis of socio-economic values of time for public transport projects

DEFF Research Database (Denmark)

Andersen, Jonas Lohmann Elkjær; Landex, Alex; Nielsen, Otto Anker

2007-01-01

The socio-economic time benefits of two light rail projects in Copenhagen are investigated using three different sets of values of time. The first set is the one the Ministry of Transport recommends for use in socio-economic analysis in Denmark; this is used as basis for comparison with the two...... recommended by the Ministry of Transport. Differentiated in-vehicle values prove to generate an even higher increase in time benefits, but vary depending on the projects....

Transport fire safety engineering in the European Union - project TRANSFEU

Directory of Open Access Journals (Sweden)

Jolanta Maria RADZISZEWSKA-WOLIŃSKA

2011-01-01

Full Text Available Article presents European Research project (of FP7-SST-2008-RTD-1 for Surface transportation TRANSFEU. Projects undertakes to deliver both a reliable toxicity measurement methodology and a holistic fire safety approach for all kind of surface transport. It bases on a harmonized Fire Safety Engineering methodology which link passive fire security with active fire security mode. This all embracing system is the key to attain optimum design solutions in respect to fire safety objectives as an alternative to the prescriptive approach. It will help in the development of innovative solutions (design and products used for the building of the surface transport which will better respect the environment.In order to reach these objectives new toxicity measurement methodology and related classification of materials, new numerical fire simulation tools, fire test methodology (laboratory and full scale and a decisive tool to optimize or explore new design in accordance to the fire safety requirements will be developed.

76 FR 11554 - Fiscal Year 2010 Public Transportation on Indian Reservations Program Project Selections

Science.gov (United States)

2011-03-02

... DEPARTMENT OF TRANSPORTATION Federal Transit Administration Fiscal Year 2010 Public Transportation... Interior for public transportation capital projects, operating costs and planning activities that are... authorized by the Safe, Accountable, Flexible, Efficient Transportation Equity Act: A Legacy for Users...

Modelling of subsonic COIL with an arbitrary magnetic modulation

Science.gov (United States)

Beránek, Jaroslav; Rohlena, Karel

2007-05-01

The concept of 1D subsonic COIL model with a mixing length was generalized to include the influence of a variable magnetic field on the stimulated emission cross-section. Equations describing the chemical kinetics were solved taking into account together with the gas temperature also a simplified mixing model of oxygen and iodine molecules. With the external time variable magnetic field the model is no longer stationary. A transformation in the system moving with the mixture reduces partial differential equations to ordinary equations in time with initial conditions given either by the stationary flow at the moment when the magnetic field is switched on combined with the boundary conditions at the injector. Advantage of this procedure is a possibility to consider an arbitrary temporal dependence of the imposed magnetic field and to calculate directly the response of the laser output. The method was applied to model the experimental data measured with the subsonic version of the COIL device in the Institute of Physics, Prague, where the applied magnetic field had a saw-tooth dependence. We found that various values characterizing the laser performance, such as the power density distribution over the active zone cross-section, may have a fairly complicated structure given by combined effects of the delayed reaction to the magnetic switching and the flow velocity. This is necessarily translated in a time dependent spatial inhomogeneity of output beam intensity profile.

Software development for subsonic aircraft’s unsteady longitudinal stability derivatives calculation

Directory of Open Access Journals (Sweden)

Maričić Nikola

2005-01-01

Full Text Available Subsonic general configuration aircrafts’ unsteady longitudinal aerodynamic stability derivatives can be estimated using finite element methodology based on the Doublet Lattice Method (DLM, the Slender Body Theory (SBT and the Method of Images (MI. Applying this methodology, software DERIV is developed. The obtained results from DERIV are compared to NASTRAN examples HA21A and HA75H. A good agreement is achieved.

Worldwide transportation/energy demand, 1975-2000. Revised Variflex model projections

Energy Technology Data Exchange (ETDEWEB)

Ayres, R.U.; Ayres, L.W.

1980-03-01

The salient features of the transportation-energy relationships that characterize the world of 1975 are reviewed, and worldwide (34 countries) long-range transportation demand by mode to the year 2000 is reviewed. A worldwide model is used to estimate future energy demand for transportation. Projections made by the forecasting model indicate that in the year 2000, every region will be more dependent on petroleum for the transportation sector than it was in 1975. This report is intended to highlight certain trends and to suggest areas for further investigation. Forecast methodology and model output are described in detail in the appendices. The report is one of a series addressing transportation energy consumption; it supplants and replaces an earlier version published in October 1978 (ORNL/Sub-78/13536/1).

Modeling water flow and solute transport in unsaturated zone inside NSRAWD project

International Nuclear Information System (INIS)

Constantin, A.; Diaconu, D.; Bucur, C.; Genty, A.

2015-01-01

The NSRAWD project (2010-2013) - Numerical Simulations for Radioactive Waste Disposal was initiated under a collaboration agreement between the Institute for Nuclear Research and the French Alternative Energies and Atomic Energy Commission (CEA). The context of the project was favorable to combine the modeling activities with an experimental part in order to improve and validate the numerical models used so far to simulate water flow and solute transport at Saligny site, Romania. The numerical models developed in the project were refined and validated on new hydrological data gathered between 2010-2012 by a monitoring station existent on site which performs automatic determination of soil water content and matrix potential, as well as several climate parameters (wind, temperature and precipitations). Water flow and solute transport was modeled in transient conditions, by taking into consideration, as well as neglecting the evapotranspiration phenomenon, on the basis of a tracer test launched on site. The determination of dispersivities for solute transport was targeted from the solute plume. The paper presents the main results achieved in the NSRAWD project related to water flow and solute transport in the unsaturated area of the Saligny site. The results indicated satisfactory predictions for the simulation of water flow in the unsaturated area, in steady state and transient conditions. In the case of tracer transport modeling, dispersivity coefficients could not be finally well fitted for the data measured on site and in order to obtain a realistic preview over the values of these parameters, further investigations are recommended. The article is followed by the slides of the presentation

Appraisal of Transport Projects

DEFF Research Database (Denmark)

Jensen, Anders Vestergaard

and robustness measures have been elaborated, which examine the subjective part of the MCDA (in form of criteria weights) and its role in decision support making. For this purpose both deterministic and stochastic sensitivity analyses have been developed. In addition, the focus has been formulating a framework...... into account the interests and preferences of different stakeholders. These various interests and preferences have been revealed by the use of decision conferencing, which engage the stakeholders and provide a common platform for understanding the decision problem. Leading up to this framework, this thesis has......, as robustness of a recommended solution is major concern in the final steps of decision making. As mentioned, the appraisal of transport projects is a complex issues involving conflict of various interests and this calls for new approaches to the practice of appraisal. The presented appraisal framework...

25 CFR 170.300 - May tribes use flexible financing to finance IRR transportation projects?

Science.gov (United States)

2010-04-01

... Financing § 170.300 May tribes use flexible financing to finance IRR transportation projects? Yes. Tribes may use flexible financing in the same manner as States to finance IRR transportation projects, unless... 25 Indians 1 2010-04-01 2010-04-01 false May tribes use flexible financing to finance IRR...

Including Health in Environmental Assessments of Major Transport Infrastructure Projects: A Documentary Analysis.

Science.gov (United States)

Riley, Emily; Harris, Patrick; Kent, Jennifer; Sainsbury, Peter; Lane, Anna; Baum, Fran

2018-05-10

Transport policy and practice impacts health. Environmental Impact Assessments (EIAs) are regulated public policy mechanisms that can be used to consider the health impacts of major transport projects before they are approved. The way health is considered in these environmental assessments (EAs) is not well known. This research asked: How and to what extent was human health considered in EAs of four major transport projects in Australia. We developed a comprehensive coding framework to analyse the Environmental Impact Statements (EISs) of four transport infrastructure projects: three road and one light rail. The coding framework was designed to capture how health was directly and indirectly included. We found that health was partially considered in all four EISs. In the three New South Wales (NSW) projects, but not the one South Australian project, this was influenced by the requirements issued to proponents by the government which directed the content of the EIS. Health was assessed using human health risk assessment (HHRA). We found this to be narrow in focus and revealed a need for a broader social determinants of health approach, using multiple methods. The road assessments emphasised air quality and noise risks, concluding these were minimal or predicted to improve. The South Australian project was the only road project not to include health data explicitly. The light rail EIS considered the health benefits of the project whereas the others focused on risk. Only one project considered mental health, although in less detail than air quality or noise. Our findings suggest EIAs lag behind the known evidence linking transport infrastructure to health. If health is to be comprehensively included, a more complete model of health is required, as well as a shift away from health risk assessment as the main method used. This needs to be mandatory for all significant developments. We also found that considering health only at the EIA stage may be a significant

Cost estimate modeling of transportation management plans for highway projects.

Science.gov (United States)

2012-05-01

Highway rehabilitation and reconstruction projects frequently cause road congestion and increase safety concerns while limiting access for road users. State Transportation Agencies (STAs) are challenged to find safer and more efficient ways to renew ...

Transport Infrastructure Surveillance and Monitoring by Electromagnetic Sensing: The ISTIMES Project

Directory of Open Access Journals (Sweden)

Marie Bost

2010-11-01

Full Text Available The ISTIMES project, funded by the European Commission in the frame of a joint Call “ICT and Security” of the Seventh Framework Programme, is presented and preliminary research results are discussed. The main objective of the ISTIMES project is to design, assess and promote an Information and Communication Technologies (ICT-based system, exploiting distributed and local sensors, for non-destructive electromagnetic monitoring of critical transport infrastructures. The integration of electromagnetic technologies with new ICT information and telecommunications systems enables remotely controlled monitoring and surveillance and real time data imaging of the critical transport infrastructures. The project exploits different non-invasive imaging technologies based on electromagnetic sensing (optic fiber sensors, Synthetic Aperture Radar satellite platform based, hyperspectral spectroscopy, Infrared thermography, Ground Penetrating Radar-, low-frequency geophysical techniques, Ground based systems for displacement monitoring. In this paper, we show the preliminary results arising from the GPR and infrared thermographic measurements carried out on the Musmeci bridge in Potenza, located in a highly seismic area of the Apennine chain (Southern Italy and representing one of the test beds of the project.

The Danish Rejsekortet (Smart Card for Public Transportation); Project Governance for Failure or Success?

DEFF Research Database (Denmark)

Harboe, Peter Georg; Riis, Eva

The authors examine a project regarded as a major failure in Danish public investments: The Smart Card for Public Transportation whose introduction was delayed for 9 years with an estimated cost overrun of 125 million EURO. After 3 years of operation, the Smart Card system only covers seven...... of the nine Danish regions and the discussion about giving up the system is continuing. The authors explore the overall conditions set up for these types of projects in the project governance - how project governance conditions a major public IT project and forms the success evaluation. The focus...... is on the whole cycle from project initiation to long-term use of the project results. Data collection is through documentation as governmental reports and evaluations, for example (Rigsrevisionen, 2011; The Comptroller and Auditor General, 2006; Transport Committee, 2011)and semi-structured interviews...

The Danish Rejsekortet ( Smart Card for Public Transportation ): Project Governance for Failure or Success ?

DEFF Research Database (Denmark)

Harboe, Peter Georg; Riis, Eva

The authors examine a project regarded as a major failure in Danish public investments: The Smart Card for Public Transportation whose introduction was delayed for 9 years with an estimated cost overrun of 125 million EURO. After 3 years of operation, the Smart Card system only covers seven...... of the nine Danish regions and the discussion about giving up the system is continuing. The authors explore the overall conditions set up for these types of projects in the project governance - how project governance conditions a major public IT project and forms the success evaluation. The focus...... is on the whole cycle from project initiation to long-term use of the project results. Data collection is through documentation as governmental reports and evaluations, for example (Rigsrevisionen, 2011; The Comptroller and Auditor General, 2006; Transport Committee, 2011)and semi-structured interviews...

HyLights: Preparation of the Large-Scale Demonstration Projects on Hydrogen for Transport in Europe

International Nuclear Information System (INIS)

Ulrich Bunger; Volker Blandow; Volker Jaensch; Harm Jeeninga; Cristina Morte Gomez

2006-01-01

The strategically important project HyLights has been launched by the European Commission in preparation of the large scale demonstration projects in transition to hydrogen as a fuel and long-term renewable energy carrier. HyLights, monitors concluded/ongoing demonstration projects and assists the planning of the next demonstration project phase, putting a clear focus on hydrogen in transport. HyLights is a coordination action that comprises 5 tasks to: 1) develop an assessment framework for concluded/ongoing demonstration projects, 2) analyse individual projects and establish a project database, 3) carry out a gaps analysis and prepare a requirement profile for the next stage projects, 4) assess and identify necessary financial and legal steps in preparation of the new projects, and 5) develop a European Initiative for the Growth of Hydrogen for Transport (EIGHT). (authors)

Transportation risk management : international practices for program development and project delivery.

Science.gov (United States)

2012-08-01

Managing transportation networks, including agency : management, program development, and project : delivery, is extremely complex and fraught with : uncertainty. Administrators, planners, and engineers : coordinate a multitude of organizational and ...

Atmospheric transport and dispersion modeling for the Hanford Environmental Dose Reconstruction Project

International Nuclear Information System (INIS)

Ramsdell, J.V.

1991-07-01

Radiation doses that may have resulted from operations at the Hanford Site are being estimated in the Hanford Environmental Dose Reconstruction (HEDR) Project. One of the project subtasks, atmospheric transport, is responsible for estimating the transport, diffusion and deposition of radionuclides released to the atmosphere. This report discusses modeling transport and diffusion in the atmospheric pathway. It is divided into three major sections. The first section of the report presents the atmospheric modeling approach selected following discussion with the Technical Steering Panel that directs the HEDR Project. In addition, the section discusses the selection of the MESOI/MESORAD suite of atmospheric dispersion models that form the basis for initial calculations and future model development. The second section of the report describes alternative modeling approaches that were considered. Emphasis is placed on the family of plume and puff models that are based on Gaussian solution to the diffusion equations. The final portion of the section describes the performance of various models. The third section of the report discusses factors that bear on the selection of an atmospheric transport modeling approach for HEDR. These factors, which include the physical setting of the Hanford Site and the available meteorological data, serve as constraints on model selection. Five appendices are included in the report. 39 refs., 4 figs., 2 tabs

Application of computational aerodynamics methods to the design and analysis of transport aircraft

Science.gov (United States)

Da Costa, A. L.

1978-01-01

The application and validation of several computational aerodynamic methods in the design and analysis of transport aircraft is established. An assessment is made concerning more recently developed methods that solve three-dimensional transonic flow and boundary layers on wings. Capabilities of subsonic aerodynamic methods are demonstrated by several design and analysis efforts. Among the examples cited are the B747 Space Shuttle Carrier Aircraft analysis, nacelle integration for transport aircraft, and winglet optimization. The accuracy and applicability of a new three-dimensional viscous transonic method is demonstrated by comparison of computed results to experimental data

Update on NAC's transportation projects

International Nuclear Information System (INIS)

Anne, Catherine; Patterson, John

2005-01-01

The Global Threat Reduction Initiative (GTRI) was announced in early 2004 by then U.S. Secretary of Energy Spencer Abraham and was reinforced by an international meeting in Vienna in September 2004 of countries supporting non- proliferation efforts. Under GTRI, the Foreign Research Reactor Program (FRR) will continue and irradiated fuel shipments under the Russian Research Fuel Return Program (RRRFR) will begin. These programs will result in a projected increase in research reactor shipments in the coming years. NAC owns and operates a fleet of eight NAC-LWT casks, which can transport up to 42 MTR fuel elements each. For the past 30 years, NAC has been supporting the Department of Energy with non-proliferation initiatives. Our teams have loaded casks in more than 25 foreign countries. Recent incidents of terrorism and ongoing threats have confirmed the necessity to ensure the security of high-enriched uranium and remove it from sensitive locations. Tremendous government efforts were initiated in 2004 in order to execute intra-governmental agreements for reactor conversion and material removal. As a result of these agreements, NAC will continue to provide its cask lease and transportation services to the Department of Energy. We expect to see very challenging shipments in the coming years. We are committed to these non-proliferation efforts as well as meeting our commercial customers' needs for transportation of irradiated fuel. The recent acquisition of NAC by USEC Inc. strengthens NAC's resources and joins NAC with a corporation with a strong non-proliferation orientation as the U.S. Government's Executive Agent under the highly successful U.S.-Russian Megatons to Megawatts program. This presentation summarizes our planned activities for the coming years with respect to GTRI initiatives. (author)

Detailed assessment of global transport-energy models’ structures and projections

Energy Technology Data Exchange (ETDEWEB)

Yeh, Sonia; Mishra, Gouri Shankar; Fulton, Lew; Kyle, Page; McCollum, David L.; Miller, Joshua; Cazzola, Pierpaolo; Teter, Jacob

2017-08-01

This paper focuses on comparing the frameworks and projections from four major global transportation models with considerable transportation technology and behavioral detail. We analyze and compare the modeling frameworks, underlying data, assumptions, intermediate parameters, and projections to identify the sources of divergence or consistency, as well as key knowledge gaps. We find that there are significant differences in the base-year data and key parameters for future projections, especially for developing countries. These include passenger and freight activity, mode shares, vehicle ownership rates, and even energy consumption by mode, particularly for shipping, aviation and trucking. This may be due in part to a lack of previous efforts to do such consistency-checking and “bench-marking.” We find that the four models differ in terms of the relative roles of various mitigation strategies to achieve a 2°C / 450 ppm CO2e target: the economics-based integrated assessment models favor the use of low carbon fuels as the primary mitigation option followed by efficiency improvements, whereas transport-only and expert-based models favor efficiency improvements of vehicles followed by mode shifts. We offer recommendations for future modeling improvements focusing on (1) reducing data gaps; (2) translating the findings from this study into relevant policy implications such as feasibility of current policy goals, additional policy targets needed, regional vs. global reductions, etc.; (3) modeling strata of demographic groups to improve understanding of vehicle ownership levels, travel behavior, and urban vs. rural considerations; and (4) conducting coordinated efforts in aligning input assumptions and historical data, policy analysis, and modeling insights.

A Vision in Aeronautics: The K-12 Wind Tunnel Project

Science.gov (United States)

1997-01-01

A Vision in Aeronautics, a project within the NASA Lewis Research Center's Information Infrastructure Technologies and Applications (IITA) K-12 Program, employs small-scale, subsonic wind tunnels to inspire students to explore the world of aeronautics and computers. Recently, two educational K-12 wind tunnels were built in the Cleveland area. During the 1995-1996 school year, preliminary testing occurred in both tunnels.

Comprehensive evaluation of environmental and economic benefits of China's urban underground transportation construction projects.

Science.gov (United States)

Yang, Xiaobin; Chen, Zhilong; Guo, Dongjun

2015-07-01

Urban underground transportation projects are introduced to address problems of scarce green land and traffic pollution. As construction of urban underground transportation is still in its infancy, there is no definite quantitative measurement on whether the construction is beneficial and what influences it will place on the region in China. This study intends to construct a comprehensive evaluation method for evaluating social, economic and environmental benefits of urban underground transportation projects and proposes the concept, role and principle for evaluation of environmental and economic benefits. It figures out relationship between the environment and factors of city development. It also summarizes three relevant factors, including transportation, biophysics and social economy, and works out indicators to evaluate the influence of urban underground transportation construction. Based on Contingent Valuation Method (CVM), Cost of Illness Approach (CIA), Human Capital Approach (HCA), this paper constructs 13 monetization calculation models for social, economic and environmental benefits in response to seven aspects, namely, reducing noise pollution and air pollution, using land efficiently, improving traffic safety, reducing traffic congestion, saving shipping time and minimizing transportation costs.

PPP projects in transport and telecommunications in Poland and Slovakia

Directory of Open Access Journals (Sweden)

Anna TOMOVÁ

2008-01-01

Full Text Available The paper informs about public – private partnerships projects in transport and telecommunications in Poland and Slovakia, describing various modes of capital entry. The PPI database of the World Bank is used. Advantages of PPP schemes are discussed for further development of infrastructure sectors.

Risk assessment for construction projects of transport infrastructure objects

Science.gov (United States)

Titarenko, Boris

2017-10-01

The paper analyzes and compares different methods of risk assessment for construction projects of transport objects. The management of such type of projects demands application of special probabilistic methods due to large level of uncertainty of their implementation. Risk management in the projects requires the use of probabilistic and statistical methods. The aim of the work is to develop a methodology for using traditional methods in combination with robust methods that allow obtaining reliable risk assessments in projects. The robust approach is based on the principle of maximum likelihood and in assessing the risk allows the researcher to obtain reliable results in situations of great uncertainty. The application of robust procedures allows to carry out a quantitative assessment of the main risk indicators of projects when solving the tasks of managing innovation-investment projects. Calculation of damage from the onset of a risky event is possible by any competent specialist. And an assessment of the probability of occurrence of a risky event requires the involvement of special probabilistic methods based on the proposed robust approaches. Practice shows the effectiveness and reliability of results. The methodology developed in the article can be used to create information technologies and their application in automated control systems for complex projects.

The projected relative index of consequence equivalence of transport of radioactive materials

International Nuclear Information System (INIS)

Nandakumar, A.N.

1999-01-01

The need exists for defining a unit risk factor to enable analysis to make a proper decision when faced with many options relating to the transport of radioactive materials between sites. A method is discussed for deriving such a factor with reference to the collective dose receivable due to the transport of radioactive material incidental to the production of one GWe.a of nuclear power. This quantity would enable the analyst to determine the projected relative index of consequence equivalence (PRICE) for the transport of various types of radioactive materials. (author)

Summer transport patterns affecting the Mohave Power Project emission

Energy Technology Data Exchange (ETDEWEB)

Farber, R.J.; Hoffer, T.E.; Green, M.C.; Walsh, P.A. [Southern California Edison, Rosemead, CA (United States)

1997-03-01

The Mohave Power Project (MPP) is an isolated 1580-MW coal-fired electric generating plant located in Laughlin, NV. Laughlin is a small desert gambling town situated in the lower Colorado River Valley near the junction of three states: Nevada, California, and Arizona. The location of the MPP is approximately 155 km southwest of the western end of the Grand Canyon National Park and about 240 km southwest from the Grand Canyon Village. This paper describes the summer transport patterns of the MPP emittants using illustrated examples from the Project MOHAVE (measurements of Haze and Visual Effects) 1992 summer intensive study. The intensive study lasted 50 days from mid-July through August and encompassed the major meteorological patterns associated with southwestern US summer meteorology. The MPP emittants were transported towards the Grand Canyon (north to the northeast) during more than 80% of the total hours. Airflow as from the south most of the time due to a combination of the semi-permanent thermal low, differential heating between the Gulf of California and lower Colorado River Valley, and upslope heating of the southern and western slopes of the nearby Colorado Plateau. 14 refs., 12 figs., 2 tabs.

Accidents on vessels transporting liquid gases and responder's concerns : the Galerne Project

International Nuclear Information System (INIS)

Cabioc'h, F.; De Castelet, D.; Penelon, T.; Pagnon, S.; Peuch, A.; Bonnardot, F.; Duhart, J.; Drevet, D.; Estiez, C.; Dernat, M.; Hermand, J.C.

2009-01-01

In 2006, the French Ministry of Research financed the Galerne project to provide responders at sea with relevant information on the hazards posed by liquid gas chemicals on vessels disabled at sea. Thirty-one chemicals are transported as liquids in order to facilitate handling and lower transport costs. Temperature and pressure parameters are manipulated in order to generate the liquefaction of the gases. Members of the Galerne project are producers and handlers of liquefied gases and are experts in atmospheric modelling, ship structure, risk assessment, hazards assessment and operations. Several simulations and experiments were performed in an effort to produce operational information for responders and headquarters. For practical and financial reasons, it was not possible to consider all 31 chemicals described in the IGC code. Only 4 liquid gases were chosen for the Galerne project, notably methane liquefied natural gas (LNG); propane LNG; ammonia; and vinyl chloride monomer (VCM). They were chosen on the basis of their transport characteristics and behaviour. This paper outlined the physical characteristics of the transported products verses their volume in standard conditions; the type of ship dedicated to transporting gases in liquid forms; and various response phases. It also included a brief review of several ship incidents and accidents. It was concluded that as far as the LNG carriers are concerns, a few accidents at sea have occurred in more than 28 years, but no major accidents involving the cargo have been reported. Handling LNG at terminals can lead to serious accidents. Accidents have occurred at sea, but without any accidental spillage of cargo. It was concluded that response teams on-board disabled liquefied gas carriers need to know the main characteristics of the cargo and the potential hazards. 3 tabs., 6 figs

Subsonic Wake Characterization of the Orion Capsule Using PIV in the Ames UPWT 11-foot Wind Tunnel (Invited)

Science.gov (United States)

Heineck, James T.; Ross, James C.; Yamauchi, Gloria K.

2015-01-01

The subsonic regime of Crew Capsule reentry has a very turbulent waker through which the Drogue Chutes must deploy. This presentation describes the particle image velocimetry measurement campaign used to help retire the risk.

Designing a Methodology for Future Air Travel Scenarios

Science.gov (United States)

Wuebbles, Donald J.; Baughcum, Steven L.; Gerstle, John H.; Edmonds, Jae; Kinnison, Douglas E.; Krull, Nick; Metwally, Munir; Mortlock, Alan; Prather, Michael J.

1992-01-01

The growing demand on air travel throughout the world has prompted several proposals for the development of commercial aircraft capable of transporting a large number of passengers at supersonic speeds. Emissions from a projected fleet of such aircraft, referred to as high-speed civil transports (HSCT's), are being studied because of their possible effects on the chemistry and physics of the global atmosphere, in particular, on stratospheric ozone. At the same time, there is growing concern about the effects on ozone from the emissions of current (primarily subsonic) aircraft emissions. Evaluating the potential atmospheric impact of aircraft emissions from HSCT's requires a scientifically sound understanding of where the aircraft fly and under what conditions the aircraft effluents are injected into the atmosphere. A preliminary set of emissions scenarios are presented. These scenarios will be used to understand the sensitivity of environment effects to a range of fleet operations, flight conditions, and aircraft specifications. The baseline specifications for the scenarios are provided: the criteria to be used for developing the scenarios are defined, the required data base for initiating the development of the scenarios is established, and the state of the art for those scenarios that have already been developed is discussed. An important aspect of the assessment will be the evaluation of realistic projections of emissions as a function of both geographical distribution and altitude from an economically viable commercial HSCT fleet. With an assumed introduction date of around the year 2005, it is anticipated that there will be no HSCT aircraft in the global fleet at that time. However, projections show that, by 2015, the HSCT fleet could reach significant size. We assume these projections of HSCT and subsonic fleets for about 2015 can the be used as input to global atmospheric chemistry models to evaluate the impact of the HSCT fleets, relative to an all-subsonic

Sub-sonic thermal explosions investigated by radiography

Energy Technology Data Exchange (ETDEWEB)

Smilowitz, Laura B [Los Alamos National Laboratory; Henson, Bryan F [Los Alamos National Laboratory; Romero, Jerry J [Los Alamos National Laboratory; Asay, Blaine W [Los Alamos National Laboratory

2010-01-01

This paper reviews the past 5 years of experiments utilizing radiographic techniques to study defiagration in thermal explosions in HMX based formulations. Details of triggering and timing synchronization are given. Radiographic images collected using both protons and x-rays are presented. Comparisons of experiments with varying size, case confinement, binder, and synchronization are presented. Techniques for quantifying the data in the images are presented and a mechanism for post-ignition burn propagation in a thermal explosion is discussed. From these experiments, we have observed a mechanism for sub-sonic defiagration with both gas phase convective and solid phase conductive burning. The convective front velocity is directly measured from the radiographic images and consumes only a small fraction of the HE. It lights the HE as it passes beginning the slower solid state conductive burn process. This mechanism is used to create a model to simulate the radiographic results and a comparison will be shown.

Designing a Successful Transportation Project: Lessons Learned from the Clean Cities American Recovery and Reinvestment Act Projects

Energy Technology Data Exchange (ETDEWEB)

Kelly, K.; Singer, M.

2017-09-01

The largest source of funding for alternative fuel vehicle and infrastructure projects in the U.S. Department of Energy's Clean Cities program's history came from the American Recovery and Reinvestment Act (Recovery Act). In 2009, the 25 cost-share projects totaled nearly $300 million in federal government investment. This effort included the involvement of 50 Clean Cities coalitions and their nearly 700 stakeholder partners who provided an additional $500 million in matching funds to support projects in their local communities. In total, those 25 projects established 1,380 alternative fueling stations and put more than 9,000 alternative fuel and advanced technology vehicles on the road. Together, these projects displaced 154 million gasoline gallon equivalents (GGE) of petroleum and averted 254,000 tons of greenhouse gas (GHG) emissions, while supporting U.S. energy independence and contributing to regional economic development. During post-project interviews, project leaders consistently cited a number of key components - ranging from technical and logistical factors, to administrative capabilities - for accomplishing an effective and impactful project. This report summarizes the high-level project design and administrative considerations for conducting a successful transportation project.

Designing a Successful Transportation Project: Lessons Learned from the Clean Cities American Recovery and Reinvestment Act Projects

Energy Technology Data Exchange (ETDEWEB)

Kelly, Kay L. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Singer, Mark R. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-09-28

The largest source of funding for alternative fuel vehicle and infrastructure projects in the U.S. Department of Energy's Clean Cities program's history came from the American Recovery and Reinvestment Act (Recovery Act). In 2009, the 25 cost-share projects totaled nearly $300 million in federal government investment. This effort included the involvement of 50 Clean Cities coalitions and their nearly 700 stakeholder partners who provided an additional $500 million in matching funds to support projects in their local communities. In total, those 25 projects established 1,380 alternative fueling stations and put more than 9,000 alternative fuel and advanced technology vehicles on the road. Together, these projects displaced 154 million gasoline gallon equivalents (GGE) of petroleum and averted 254,000 tons of greenhouse gas (GHG) emissions, while supporting U.S. energy independence and contributing to regional economic development. During post-project interviews, project leaders consistently cited a number of key components - ranging from technical and logistical factors, to administrative capabilities - for accomplishing an effective and impactful project. This report summarizes the high-level project design and administrative considerations for conducting a successful transportation project.

A Preliminary Evaluation of Supersonic Transport Category Vehicle Operations in the National Airspace System

Science.gov (United States)

Underwood, Matthew C.; Guminsky, Michael D.

2015-01-01

Several public sector businesses and government agencies, including the National Aeronautics and Space Administration are currently working on solving key technological barriers that must be overcome in order to realize the vision of low-boom supersonic flights conducted over land. However, once these challenges are met, the manner in which this class of aircraft is integrated in the National Airspace System may become a potential constraint due to the significant environmental, efficiency, and economic repercussions that their integration may cause. Background research was performed on historic supersonic operations in the National Airspace System, including both flight deck procedures and air traffic controller procedures. Using this information, an experiment was created to test some of these historic procedures in a current-day, emerging Next Generation Air Transportation System (NextGen) environment and observe the interactions between commercial supersonic transport aircraft and modern-day air traffic. Data was gathered through batch simulations of supersonic commercial transport category aircraft operating in present-day traffic scenarios as a base-lining study to identify the magnitude of the integration problems and begin the exploration of new air traffic management technologies and architectures which will be needed to seamlessly integrate subsonic and supersonic transport aircraft operations. The data gathered include information about encounters between subsonic and supersonic aircraft that may occur when supersonic commercial transport aircraft are integrated into the National Airspace System, as well as flight time data. This initial investigation is being used to inform the creation and refinement of a preliminary Concept of Operations and for the subsequent development of technologies that will enable overland supersonic flight.

WEpods project : Finding the potential for automated road public transport

NARCIS (Netherlands)

Homem De Almeida Rodriguez Correia, G.

2016-01-01

Vehicle automation is developing rapidly, nevertheless a lot of wor k is still lacking, as we are not yet at a point where vehicles are able to drive themselves on a road without a human behind the wheel. One of the possibilities of automation is its use as public transport. In theWEpods project,

Results from transient transport experiments in Rijnhuizen tokamak project: Heat convection, transport barriers and 'non-local' effects

International Nuclear Information System (INIS)

Mantica, P.; Gorini, G.; Hogeweij, G.M.D.; Kloe, J. de; Lopez Cardozo, N.J.; Schilham, A.M.R.

2001-01-01

An overview of experimental transport studies performed on the Rijnhuizen Tokamak Project (RTP) using transient transport techniques in both Ohmic and ECH dominated plasmas is presented. Modulated Electron Cyclotron Heating (ECH) and oblique pellet injection (OPI) have been used to induce electron temperature (T e ) perturbations at different radial locations. These were used to probe the electron transport barriers observed near low order rational magnetic surfaces in ECH dominated steady-state RTP plasmas. Layers of inward electron heat convection in off-axis ECH plasmas were detected with modulated ECH. This suggests that RTP electron transport barriers consist of heat pinch layers rather than layers of low thermal diffusivity. In a different set of experiments, OPI triggered a transient rise of the core T e due to an increase of the T e gradient in the 1< q<2 region. These transient transport barriers were probed with modulated ECH and found to be due to a transient drop of the electron heat diffusivity, except for off-axis ECH plasmas, where a transient inward pinch is also observed. Transient transport studies in RTP could not solve this puzzling interplay between heat diffusion and convection in determining an electron transport barrier. They nevertheless provided challenging experimental evidence both for theoretical modelling and for future experiments. (author)

Observations of coastal sediment dynamics of the Tijuana Estuary Fine Sediment Fate and Transport Demonstration Project, Imperial Beach, California

Science.gov (United States)

Warrick, Jonathan A.; Rosenberger, Kurt J.; Lam, Angela; Ferreiera, Joanne; Miller, Ian M.; Rippy, Meg; Svejkovsky, Jan; Mustain, Neomi

2012-01-01

Coastal restoration and management must address the presence, use, and transportation of fine sediment, yet little information exists on the patterns and/or processes of fine-sediment transport and deposition for these systems. To fill this information gap, a number of State of California, Federal, and private industry partners developed the Tijuana Estuary Fine Sediment Fate and Transport Demonstration Project ("Demonstration Project") with the purpose of monitoring the transport, fate, and impacts of fine sediment from beach-sediment nourishments in 2008 and 2009 near the Tijuana River estuary, Imperial Beach, California. The primary purpose of the Demonstration Project was to collect and provide information about the directions, rates, and processes of fine-sediment transport along and across a California beach and nearshore setting. To achieve these goals, the U.S. Geological Survey monitored water, beach, and seafloor properties during the 2008–2009 Demonstration Project. The project utilized sediment with ~40 percent fine sediment by mass so that the dispersal and transport of fine sediment would be easily recognizable. The purpose of this report is to present and disseminate the data collected during the physical monitoring of the Demonstration Project. These data are available online at the links noted in the "Additional Digital Information" section. Synthesis of these data and results will be provided in subsequent publications.

The Rise, the Fall, and ... : The Emerging Recovery of Project Finance in Transport

OpenAIRE

Estache, Antonio; Strong, John

2000-01-01

Recent developments in emerging financial markets have dramatically changed the appetite for (and terms of) transport infrastructure projects. As a result of defaults in Asia and Russia and devaluations in Asia, Brazil, and Russia, political and currency and exchange risk premia have increased dramatically. Given large needs for sovereign debt financing, infrastructure project finance will...

Cost estimate modeling of transportation management plans for highway projects : [research brief].

Science.gov (United States)

2012-05-01

Highway rehabilitation and reconstruction projects frequently cause road congestion and increase safety concerns while limiting access for road users. State Transportation Agencies (STAs) are challenged to find safer and more efficient ways to renew ...

The rise, the fall, and ... : the emerging recovery of project finance transport

OpenAIRE

Estache, Antonio; Strong, John

2000-01-01

Recent developments in emerging financial markets have dramatically changed the appetite for (and terms of) transport infrastructure projects. As a result of defaults in Asia and Russia and devaluations in Asia, Brazil, and Russia, political and currency and exchange risk premia have increased dramatically. Given large needs for sovereign debt financing, infrastructure project finance will be seeking guarantees at the same time as governments are issuing primary securities. Large portfolio ou...

Multimodal method for scattering of sound at a sudden area expansion in a duct with subsonic flow

NARCIS (Netherlands)

Kooijman, G.; Testud, P.; Aurégan, Y.; Hirschberg, A.

2008-01-01

The scattering of sound at a sudden area expansion in a duct with subsonic mean flow has been modelled with a multimodal method. Technological applications are for instance internal combustion engine exhaust silencers and silencers in industrial duct systems. Both two-dimensional (2D) rectangular

The Implementation of Transportation and Transit Projects on the Basis of Public-Private Partnership in Russia

Directory of Open Access Journals (Sweden)

Valery Anatolyevich Tsevtkov

2016-12-01

Full Text Available The article considers the main directions of the implementation of the current transportation and transit projects on the basis of the institution of public-private partnership in Russia. This work is a continuation of the study of the theory and practice of the application of public-private partnership in the investment projects aimed at the development and realization of the transportation and transit potential of the country. On the methodological basis of evolutionary and institutional economics, historical approach, system-oriented analysis and the theory of firms, the main current projects for the development of Russian transportation and transit system using public-private partnership are considered. They are the construction of a high-speed line of Moscow — Kazan with subsequent extension to the Chinese border; functioning of the transport and logistics in the Chelyabinsk region; infrastructure of transit cargo by Northern Sea Route; participation of foreign investors in the development of Russian seaports and sea gates. It is shown that the competitive advantage of transit traffic by a particular route requires more traversing speed of cargo with a minimum of stops, handling and overloads in the way. Revenue from transportation and transit potential implementation can be comparable to the size of the resource rent in the case of the development in Russia of the production and transit sector of the economy, and not only of a transit one . In this regard, the emphasis is placed on the determination of the possibility and necessity of organizational changes associated with the development of a large public-private transportation company, able to compete with global sea container services of the route of Asia — Europe. The main directions and activities under the proposed national project «Development of transit economy in Russia: Uniting Eurasia» and its subprogram «Creation of innovative rolling stock for container and multimodal

Results of the MITRA project: Monitoring and intervention for the transportation of dangerous goods

International Nuclear Information System (INIS)

Planas, E.; Pastor, E.; Presutto, F.; Tixier, J.

2008-01-01

The objective of the MITRA (monitoring and intervention for the transportation of dangerous goods) project was to prototype a new operational system for monitoring the transportation of dangerous goods in Europe based on regional responsibilities. This concept, based on systems used in air traffic control, aims to provide civil security centres with real-time knowledge of the position and contents of dangerous vehicles circulating in their area of responsibility, and, in the event of a dangerous situation, to issue warnings, alerts and crisis management information, thereby allowing intervention teams to react immediately with maximum safety. The project was funded by the European Commission under the 6th Framework Programme (STREP - specific targeted research project - under the Information Society Technologies priority). It started on 1 September 2004 and ended on 31 October 2006. This paper presents the results of this project and the conclusions derived from the field tests carried out in Germany and in the French/Spanish border region in order to test the proposed operational system

The Implementation of Transportation and Transit Projects on the Basis of Public-Private Partnership in Russia

OpenAIRE

Valery Anatolyevich Tsevtkov; Kobilzhon Khodzhievich Zoidov; Alexey Anatolyevich Medkov

2016-01-01

The article considers the main directions of the implementation of the current transportation and transit projects on the basis of the institution of public-private partnership in Russia. This work is a continuation of the study of the theory and practice of the application of public-private partnership in the investment projects aimed at the development and realization of the transportation and transit potential of the country. On the methodological basis of evolutionary and institu...

Multi-Objective Optimization of a Turbofan for an Advanced, Single-Aisle Transport

Science.gov (United States)

Berton, Jeffrey J.; Guynn, Mark D.

2012-01-01

Considerable interest surrounds the design of the next generation of single-aisle commercial transports in the Boeing 737 and Airbus A320 class. Aircraft designers will depend on advanced, next-generation turbofan engines to power these airplanes. The focus of this study is to apply single- and multi-objective optimization algorithms to the conceptual design of ultrahigh bypass turbofan engines for this class of aircraft, using NASA s Subsonic Fixed Wing Project metrics as multidisciplinary objectives for optimization. The independent design variables investigated include three continuous variables: sea level static thrust, wing reference area, and aerodynamic design point fan pressure ratio, and four discrete variables: overall pressure ratio, fan drive system architecture (i.e., direct- or gear-driven), bypass nozzle architecture (i.e., fixed- or variable geometry), and the high- and low-pressure compressor work split. Ramp weight, fuel burn, noise, and emissions are the parameters treated as dependent objective functions. These optimized solutions provide insight to the ultrahigh bypass engine design process and provide information to NASA program management to help guide its technology development efforts.

The 2055 freight transportation system and the impact of near term rail improvements on TXDOT planning project management plan.

Science.gov (United States)

2016-03-01

The Texas Department of Transportation (TxDOT) is the sponsor of the project. The : project goals are to: (1) produce a framework for Texas freight transportation system in : 2055 and (2) develop a set of rail planning recommendations that will be...

Hybrid-Electric and Distributed Propulsion Technologies for Large Commercial Transports: A NASA Perspective

Science.gov (United States)

Madavan, Nateri K.; Del Rosario, Ruben; Jankovsky, Amy L.

2015-01-01

Develop and demonstrate technologies that will revolutionize commercial transport aircraft propulsion and accelerate development of all-electric aircraft architectures. Enable radically different propulsion systems that can meet national environmental and fuel burn reduction goals for subsonic commercial aircraft. Focus on future large regional jets and single-aisle twin (Boeing 737- class) aircraft for greatest impact on fuel burn, noise and emissions. Research horizon is long-term but with periodic spinoff of technologies for introduction in aircraft with more- and all-electric architectures. Research aligned with new NASA Aeronautics strategic R&T thrusts in areas of transition to low-carbon propulsion and ultra-efficient commercial transports.

Subsonic Ultra Green Aircraft Research Phase II: N+4 Advanced Concept Development

Science.gov (United States)

Bradley, Marty K.; Droney, Christopher K.

2012-01-01

This final report documents the work of the Boeing Subsonic Ultra Green Aircraft Research (SUGAR) team on Task 1 of the Phase II effort. The team consisted of Boeing Research and Technology, Boeing Commercial Airplanes, General Electric, and Georgia Tech. Using a quantitative workshop process, the following technologies, appropriate to aircraft operational in the N+4 2040 timeframe, were identified: Liquefied Natural Gas (LNG), Hydrogen, fuel cell hybrids, battery electric hybrids, Low Energy Nuclear (LENR), boundary layer ingestion propulsion (BLI), unducted fans and advanced propellers, and combinations. Technology development plans were developed.

Transport fuel demand responses to fuel price and income projections : Comparison of integrated assessment models

NARCIS (Netherlands)

Edelenbosch, O. Y.; van Vuuren, Detlef; Bertram, C.; Carrara, S.; Emmerling, J.; Daly, H.; Kitous, A.; McCollum, D. L.; Saadi Failali, N.

Income and fuel price pathways are key determinants in projections of the energy system in integrated assessment models. In recent years, more details have been added to the transport sector representation in these models. To better understand the model dynamics, this manuscript analyses transport

Wing-Alone Aerodynamic Characteristics to High Angles of Attack at Subsonic and Transonic Speeds.

Science.gov (United States)

1982-11-01

support subsystems, the test- ing of these models consumes a disproportionate amount of model construction effort and wind-tunnel testing time compared...constant taper ratio with the exception of the aspect ratio 4, taper ratio 0.5 wing at subsonic speeds; the anomalous behavior of this wing is likely...0000000 ...... 0 0 0i 010... 0.. .......... .. .............. tt.. 4t t * PS4 Oft* .. MM.~0o004.0 s.t~o.4

On the logarithmic-singularity correction in the kernel function method of subsonic lifting-surface theory

Science.gov (United States)

Lan, C. E.; Lamar, J. E.

1977-01-01

A logarithmic-singularity correction factor is derived for use in kernel function methods associated with Multhopp's subsonic lifting-surface theory. Because of the form of the factor, a relation was formulated between the numbers of chordwise and spanwise control points needed for good accuracy. This formulation is developed and discussed. Numerical results are given to show the improvement of the computation with the new correction factor.

Transportation Energy Futures Series. Projected Biomass Utilization for Fuels and Power in a Mature Market

Energy Technology Data Exchange (ETDEWEB)

Ruth, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mai, T. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Newes, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Aden, A. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Warner, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Uriarte, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Inman, D. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Simpkins, T. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Argo, A. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2013-03-01

The viability of biomass as transportation fuel depends upon the allocation of limited resources for fuel, power, and products. By focusing on mature markets, this report identifies how biomass is projected to be most economically used in the long term and the implications for greenhouse gas (GHG) emissions and petroleum use. In order to better understand competition for biomass between these markets and the potential for biofuel as a market-scale alternative to petroleum-based fuels, this report presents results of a micro-economic analysis conducted using the Biomass Allocation and Supply Equilibrium (BASE) modeling tool. The findings indicate that biofuels can outcompete biopower for feedstocks in mature markets if research and development targets are met. The BASE tool was developed for this project to analyze the impact of multiple biomass demand areas on mature energy markets. The model includes domestic supply curves for lignocellulosic biomass resources, corn for ethanol and butanol production, soybeans for biodiesel, and algae for diesel. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

Transportation Energy Futures Series: Projected Biomass Utilization for Fuels and Power in a Mature Market

Energy Technology Data Exchange (ETDEWEB)

Ruth, M.; Mai, T.; Newes, E.; Aden, A.; Warner, E.; Uriarte, C.; Inman, D.; Simpkins, T.; Argo, A.

2013-03-01

The viability of biomass as transportation fuel depends upon the allocation of limited resources for fuel, power, and products. By focusing on mature markets, this report identifies how biomass is projected to be most economically used in the long term and the implications for greenhouse gas (GHG) emissions and petroleum use. In order to better understand competition for biomass between these markets and the potential for biofuel as a market-scale alternative to petroleum-based fuels, this report presents results of a micro-economic analysis conducted using the Biomass Allocation and Supply Equilibrium (BASE) modeling tool. The findings indicate that biofuels can outcompete biopower for feedstocks in mature markets if research and development targets are met. The BASE tool was developed for this project to analyze the impact of multiple biomass demand areas on mature energy markets. The model includes domestic supply curves for lignocellulosic biomass resources, corn for ethanol and butanol production, soybeans for biodiesel, and algae for diesel. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

Hybrid advection scheme for 3-dimensional atmospheric models. Testing and application for a study of NO{sub x} transport

Energy Technology Data Exchange (ETDEWEB)

Zubov, V.A.; Rozanov, E.V. [Main Geophysical Observatory, St.Petersburg (Russian Federation); Schlesinger, M.E.; Andronova, N.G. [Illinois Univ., Urbana-Champaign, IL (United States). Dept. of Atmospheric Sciences

1997-12-31

The problems of ozone depletion, climate change and atmospheric pollution strongly depend on the processes of production, destruction and transport of chemical species. A hybrid transport scheme was developed, consisting of the semi-Lagrangian scheme for horizontal advection and the Prather scheme for vertical transport, which have been used for the Atmospheric Chemical Transport model to calculate the distributions of different chemical species. The performance of the new hybrid scheme has been evaluated in comparison with other transport schemes on the basis of specially designed tests. The seasonal cycle of the distribution of N{sub 2}O simulated by the model, as well as the dispersion of NO{sub x} exhausted from subsonic aircraft, are in a good agreement with published data. (author) 8 refs.

Hybrid advection scheme for 3-dimensional atmospheric models. Testing and application for a study of NO{sub x} transport

Energy Technology Data Exchange (ETDEWEB)

Zubov, V A; Rozanov, E V [Main Geophysical Observatory, St.Petersburg (Russian Federation); Schlesinger, M E; Andronova, N G [Illinois Univ., Urbana-Champaign, IL (United States). Dept. of Atmospheric Sciences

1998-12-31

The problems of ozone depletion, climate change and atmospheric pollution strongly depend on the processes of production, destruction and transport of chemical species. A hybrid transport scheme was developed, consisting of the semi-Lagrangian scheme for horizontal advection and the Prather scheme for vertical transport, which have been used for the Atmospheric Chemical Transport model to calculate the distributions of different chemical species. The performance of the new hybrid scheme has been evaluated in comparison with other transport schemes on the basis of specially designed tests. The seasonal cycle of the distribution of N{sub 2}O simulated by the model, as well as the dispersion of NO{sub x} exhausted from subsonic aircraft, are in a good agreement with published data. (author) 8 refs.

EVALUATION OF EFFICIENCY OF FINANCING TRANSPORT INFRASTRUCTURE PROJECTS REALIZED IN THE FRAMEWORK OF PUBLIC PRIVATE PARTNERSHIP

Directory of Open Access Journals (Sweden)

S. B. Vasiliev

2015-01-01

Full Text Available The article examines the basic approach to evaluating efficiency of financing transport infrastructure projects realized in the framework of public private partnership. The main ways of the project realization are identified, and their main advantages and disadvantages are described. Detailed elaboration and structuring of infrastructure projects are grounded.

Large-Eddy Simulation of Subsonic Jets

International Nuclear Information System (INIS)

Vuorinen, Ville; Wehrfritz, Armin; Yu Jingzhou; Kaario, Ossi; Larmi, Martti; Boersma, Bendiks Jan

2011-01-01

The present study deals with development and validation of a fully explicit, compressible Runge-Kutta-4 (RK4) Navier-Stokes solver in the opensource CFD programming environment OpenFOAM. The background motivation is to shift towards explicit density based solution strategy and thereby avoid using the pressure based algorithms which are currently proposed in the standard OpenFOAM release for Large-Eddy Simulation (LES). This shift is considered necessary in strongly compressible flows when Ma > 0.5. Our application of interest is related to the pre-mixing stage in direct injection gas engines where high injection pressures are typically utilized. First, the developed flow solver is discussed and validated. Then, the implementation of subsonic inflow conditions using a forcing region in combination with a simplified nozzle geometry is discussed and validated. After this, LES of mixing in compressible, round jets at Ma = 0.3, 0.5 and 0.65 are carried out. Respectively, the Reynolds numbers of the jets correspond to Re = 6000, 10000 and 13000. Results for two meshes are presented. The results imply that the present solver produces turbulent structures, resolves a range of turbulent eddy frequencies and gives also mesh independent results within satisfactory limits for mean flow and turbulence statistics.

Numerical optimization of circulation control airfoil at high subsonic speed

Science.gov (United States)

Tai, T. C.; Kidwell, G. H., Jr.

1984-01-01

A numerical procedure for optimizing the design of the circulation control airfoil for use at high subsonic speeds is presented. The procedure consists of an optimization scheme coupled with a viscous potential flow analysis for the blowing jet. The desired airfoil is defined by a combination of three baseline shapes (cambered ellipse and cambered ellipse with drooped and spiraled trailing edges). The coefficients of these shapes are used as design variables in the optimization process. Under the constraints of lift augmentation and lift-to-drag ratios, the airfoil, optimized at free-stream Mach 0.54 and alpha = -2 degrees can be characterized as a cambered ellipse with a drooped trailing edge. Experimental tests support the performance improvement predicted by numerical optimization.

Project U-Turn: increasing active transportation in Jackson, Michigan.

Science.gov (United States)

TenBrink, David S; McMunn, Randall; Panken, Sarah

2009-12-01

Jackson, Michigan, is a medium-sized city suffering from a bad economy and obesity-related health issues. Nearly 20% of the 36,000 residents live below the poverty line. It is a relatively young city (median age of 30 years) with a mixed ethnicity (20% black, 73% white, 4% Hispanic). The city offers many structured, active recreational opportunities, but has not integrated physical activity into daily life. Project U-Turn aimed to increase active transportation (e.g., biking, walking, and transit use) through an integrated approach to Active Living by Design's community action model and the Michigan Safe Routes to School model. Resources were focused on active living promotions and programs; partnership meetings were the source of changes in policy and physical projects. Each initiative was designed to introduce each of the 5Ps (preparation, promotion, programs, policy, and physical projects) to build support for the partnership's overall work. The partnership collected snapshot data of community walking and biking behavior, percentage of students walking to school, participation in events and programs, and new physical projects. Jackson saw a vast improvement in physical infrastructure and policy and a related increase in walking and biking in the community. The project engaged in purposeful partnership building to implement effective programs and promotions that built support for policy and physical projects. Limited resources were best used by encouraging partners to contribute and coordinate activities using existing staff, funding, and resources. Jackson has seen a shift toward awareness of the benefits of active living on community health, economic development, and environmental awareness.

The 2055 freight transportation system and the impact of near term rail improvements on TxDOT planning : project management plan.

Science.gov (United States)

2016-03-01

The Texas Department of Transportation (TxDOT) is the sponsor of the project. The : project goals are to: (1) produce a framework for Texas freight transportation system in : 2055 and (2) develop a set of rail planning recommendations that will be...

Improving value of travel time savings estimation for more effective transportation project evaluation.

Science.gov (United States)

2012-12-01

Estimates of value of time (VOT) and value of travel time savings (VTTS) are critical elements in benefitcost : analyses of transportation projects and in developing congestion pricing policies. In addition, : differences in VTTS among various modes ...

Accidents on vessels transporting liquid gases and responder's concerns : the Galerne Project

Energy Technology Data Exchange (ETDEWEB)

Cabioc' h, F. [Centre de Documentation, de Recherche et d' Experimentations, Brest (France); De Castelet, D. [Veritas, Paris (France); Penelon, T.; Pagnon, S. [Ineris, Verneuil en Halatte (France); Peuch, A.; Bonnardot, F. [Meteo France, Toulouse (France); Duhart, J. [GdF-Suez, Paris (France); Drevet, D. [French Ministry of Transport, Paris (France). Sea Accident Investigation Bureau; Cerutti, C. [French Navy, Brest (France); Estiez, C. [French Civil Security, Paris (France); Dernat, M. [Total Gaz and New Energy, Paris (France); Hermand, J.C. [Total PetroChemicals, Paris (France)

2009-07-01

In 2006, the French Ministry of Research financed the Galerne project to provide responders at sea with relevant information on the hazards posed by liquid gas chemicals on vessels disabled at sea. Thirty-one chemicals are transported as liquids in order to facilitate handling and lower transport costs. Temperature and pressure parameters are manipulated in order to generate the liquefaction of the gases. Members of the Galerne project are producers and handlers of liquefied gases and are experts in atmospheric modelling, ship structure, risk assessment, hazards assessment and operations. Several simulations and experiments were performed in an effort to produce operational information for responders and headquarters. For practical and financial reasons, it was not possible to consider all 31 chemicals described in the IGC code. Only 4 liquid gases were chosen for the Galerne project, notably methane liquefied natural gas (LNG); propane LNG; ammonia; and vinyl chloride monomer (VCM). They were chosen on the basis of their transport characteristics and behaviour. This paper outlined the physical characteristics of the transported products verses their volume in standard conditions; the type of ship dedicated to transporting gases in liquid forms; and various response phases. It also included a brief review of several ship incidents and accidents. It was concluded that as far as the LNG carriers are concerns, a few accidents at sea have occurred in more than 28 years, but no major accidents involving the cargo have been reported. Handling LNG at terminals can lead to serious accidents. Accidents have occurred at sea, but without any accidental spillage of cargo. It was concluded that response teams on-board disabled liquefied gas carriers need to know the main characteristics of the cargo and the potential hazards. 3 tabs., 6 figs.

Assessment of Large Transport Infrastructure Projects: the CBA-DK model

DEFF Research Database (Denmark)

Salling, Kim Bang; Banister, David

2008-01-01

The scope of this paper is to present a newly developed decision support model to assess transport infrastructure projects: CBA-DK. The model makes use of conventional cost-benefit analysis resulting in aggregated single point estimates and quantitative risk analysis using Monte Carlo simulation...... resulting in interval results. The embedded uncertainties within traditional CBA such as ex-ante based investment costs and travel time savings are of particular concern. The methodological approach has been to apply suitable probability distribution functions on the uncertain parameters, thus resulting...... in feasibility risk assessment moving from point to interval results. Decision support as illustrated in this paper aims to provide assistance in the development and ultimately the choice of action while accounting for the uncertainties surrounding transport appraisal schemes. The modelling framework...

Assessment of Large Transport Infrastructure Projects: The CBA-DK Model

DEFF Research Database (Denmark)

Salling, Kim Bang; Banister, David

2009-01-01

use of both deterministic and stochastic based information. Decision support as illustrated in this paper aims to provide assistance in the development and ultimately the choice of action, while accounting for the uncertainties surrounding transport appraisal schemes. The modelling framework......This paper presents a newly developed decision support model to assess transport infrastructure projects: CBA-DK. The model combines use of conventional cost–benefit analysis to produce aggregated single point estimates, with quantitative risk analysis using Monte Carlo simulation to produce...... interval results. The embedded uncertainties within traditional CBA such as ex-ante based investment costs and travel time savings are of particular concern. The paper investigates these two impacts in terms of the Optimism Bias principle which is used to take account of the underestimation of construction...

75 FR 75532 - Surface Transportation Project Delivery Pilot Program; Caltrans Audit Report

Science.gov (United States)

2010-12-03

...] Surface Transportation Project Delivery Pilot Program; Caltrans Audit Report AGENCY: Federal Highway... participating in the Pilot Program, 23 U.S.C. 327(g) mandates semiannual audits during each of the first 2 years of State participation. This notice announces and solicits comments on the fifth audit report for the...

76 FR 5237 - Surface Transportation Project Delivery Pilot Program; Caltrans Audit Report

Science.gov (United States)

2011-01-28

...] Surface Transportation Project Delivery Pilot Program; Caltrans Audit Report AGENCY: Federal Highway... participating in the Pilot Program, 23 U.S.C. 327(g) mandates semiannual audits during each of the first 2 years of State participation. This final report presents the findings from the fifth FHWA audit of the...

77 FR 26355 - Surface Transportation Project Delivery Pilot Program; Caltrans Audit Report

Science.gov (United States)

2012-05-03

...] Surface Transportation Project Delivery Pilot Program; Caltrans Audit Report AGENCY: Federal Highway... participating in the Pilot Program, 23 U.S.C. 327(g) mandates semiannual audits during each of the first 2 years of State participation. This final report presents the findings from the sixth FHWA audit of the...

Transportation energy scenario analysis technical report No. 1: examination of four existing scenarios. [Projections for 1985, 1995, 2010, and 2025

Energy Technology Data Exchange (ETDEWEB)

Bernard, M. J.; LaBelle, S. J.; Millar, M.; Walbridge, E. W.

1978-03-01

This project aims to provide the DOE Division of Transportation Energy Conservation (TEC) with a long-range forecasting framework in which to evaluate potential changes to the U.S. Transportation system. This initial report examines four existing, but diverse, 50-year scenarios of the future. It describes the scenarios and summarizes the changes in the major transportation system variables that would occur through the year 2025 in each scenario. Projections of variables of interest to TEC are explored, including passenger or ton miles and energy consumption. Each is reported for 1985, 1995, 2010, and 2025 under four scenarios: success, moderate economic growth, energy crisis, and transformation. The philosophy of this project is that the transportation system must support future lifestyles; by examining potential future lifestyles the required transportation system changes can be deduced. The project: (a) develops a set of scenarios that span likely futures; (b) describes the lifestyles in each scenario in order; (c) determines the characteristics of the transportation system supporting those lifestyles; (d) indicates transportation technologies and policies necessary in that system; and (e) derives the energy characteristics of that system. The implications of the four existing scenarios are examined with emphasis on current TEC electric-vehicle development. This preliminary investigation will be followed by detailed-scenario building (modifying existing scenarios or developing new ones) and generation of lifestyles and transportation system demands under each of the scenarios. This work will be reported in October 1978.

Examination of decision support systems for composite CBA & MCDA assessments of transport infrastructure projects

DEFF Research Database (Denmark)

Barfod, Michael Bruhn; Jensen, Anders Vestergaard; Leleur, Steen

This paper examines decision support systems (DSS) for composite appraisals of transport infrastructure projects comprising both cost-benefit analysis (CBA) and multi-criteria analysis (MCA). Two DSS are in this context examined and compared using a case study dealing with alternatives for a new...... for conducting composite appraisals of transport infrastructure projects, and research questions defining future work in the context of composite DSS and their use in decision making processes are set out....... high-speed railway line between the two cities, Norrköping and Bäckeby, in Sweden. Both systems are based on additive value functions and makes use of pair wise comparisons. The first system examined, which is widely used and based on acknowledged methods, comprises the REMBRANDT technique using pair...

Flexibility analysis of main primary heat transport system : Narora Atomic Power Project

International Nuclear Information System (INIS)

Rastogi, S.K.

1975-01-01

The paper presents flexibility analysis problem of main primary heat transport system and the approximate analysis that has been made to estimate the loads coming on major equipments. The primary heat transport system for Narora Atomic Power Project is adopting vertical steam generators and pumps equally divided on either side of the reactor with inter-connecting pipes and feeders. Since the system is mainly spring supported with movement of a few points in certain direction defined but no anchorage, it represents a good problem for flexibility analysis which can only be solved in one step by developing a good computer programme. (author)

Project survey for trolley-bus transport; Johdinautoliikenteen hankeselvitys

Energy Technology Data Exchange (ETDEWEB)

Anttila, T.; Eklund, P.; Airaksinen, S.; Maettoe, R.; Laehdetie, A.

2011-04-15

To investigate the feasibility and rationality of the revival of trolley bus traffic in Helsinki a full size project plan was conducted for a variety of alternatives. This included a survey on the latest developments of the trolley bus technology, three optional plans for route network, a budgetary level design for a fully functional depot in Koskela bus depot, examination of urban landscape structures, a study on organisational options, particular technical specifications applicable on suitable trolley buses and an examination of the impacts on the environment and on the future development of public transport. The basic concept of a trolley bus as a means of electric public transport vehicle has found its form over the years, but all the components of the system undergo at present intensive development. In context of this survey also the option of a fully autonomous electric bus powered by accumulators or fuel cells and the like was investigated. However, such technology is still totally inadequate for a heavy duty bus. There are no economically competitive and effective systems available as yet. The trolley bu is the far most reliable system and gives the best life cycle economy for a foreseeable future. Earliest estimates for alternative electric technologies in regular bus service are viable just after one investment cycle some time beyond 2030. Then it should be possible to run without the support of a comprehensive overhead line. The latest achievements in the development of trolley bus are auxiliary engine and accumulator systems allowing for more autonomous propulsion. Nowadays, trolley buses are equipped with an auxiliary power unit that alleviates the traditional restrictions of the overhead line. The modern trolley bus may run short distances without the trolley lines. Recuperation of the kinetic energy at deceleration (braking) either into the overhead line network or by storing it in the vehicle is one of the characteristics of modern trolley buses

Global emission projections for the transportation sector using dynamic technology modeling

Science.gov (United States)

Yan, F.; Winijkul, E.; Streets, D. G.; Lu, Z.; Bond, T. C.; Zhang, Y.

2014-06-01

In this study, global emissions of gases and particles from the transportation sector are projected from the year 2010 to 2050. The Speciated Pollutant Emission Wizard (SPEW)-Trend model, a dynamic model that links the emitter population to its emission characteristics, is used to project emissions from on-road vehicles and non-road engines. Unlike previous models of global emission estimates, SPEW-Trend incorporates considerable detail on the technology stock and builds explicit relationships between socioeconomic drivers and technological changes, such that the vehicle fleet and the vehicle technology shares change dynamically in response to economic development. Emissions from shipping, aviation, and rail are estimated based on other studies so that the final results encompass the entire transportation sector. The emission projections are driven by four commonly-used IPCC (Intergovernmental Panel on Climate Change) scenarios (A1B, A2, B1, and B2). With global fossil-fuel use (oil and coal) in the transportation sector in the range of 128-171 EJ across the four scenarios, global emissions are projected to be 101-138 Tg of carbon monoxide (CO), 44-54 Tg of nitrogen oxides (NOx), 14-18 Tg of non-methane total hydrocarbons (THC), and 3.6-4.4 Tg of particulate matter (PM) in the year 2030. At the global level, a common feature of the emission scenarios is a projected decline in emissions during the first one or two decades (2010-2030), because the effects of stringent emission standards offset the growth in fuel use. Emissions increase slightly in some scenarios after 2030, because of the fast growth of on-road vehicles with lax or no emission standards in Africa and increasing emissions from non-road gasoline engines and shipping. On-road vehicles and non-road engines contribute the most to global CO and THC emissions, while on-road vehicles and shipping contribute the most to NOx and PM emissions. At the regional level, Latin America and East Asia are the two

Air crew exposure on board a subsonic aircraft studied with complex dosimetric sets

International Nuclear Information System (INIS)

Spurny, F.; Votockova, I.; Bottollier-Depois, J.F.

1996-01-01

Radiation fields on board a subsonic aircraft have been studied using a complex set of measuring instruments i.e. tissue equivalent proportional counter (TEPC), neutron rem-meter, environmental radiation dose rate meter, thermoluminescent detectors (TLDs), track etch detectors (TEDs) and bubble damage neutron detectors (BDNDs). The measurements have been realised on board the Airbus A310-300 during the flights Prague-Montreal and Montreal-Prague, in February 1995. The results obtained are presented, analysed and discussed both from the point of view of the detector responses and the general exposure levels. (authors). 23 refs., 1 fig., 4 tabs

Nonlinear Projective-Iteration Methods for Solving Transport Problems on Regular and Unstructured Grids

International Nuclear Information System (INIS)

Dmitriy Y. Anistratov; Adrian Constantinescu; Loren Roberts; William Wieselquist

2007-01-01

This is a project in the field of fundamental research on numerical methods for solving the particle transport equation. Numerous practical problems require to use unstructured meshes, for example, detailed nuclear reactor assembly-level calculations, large-scale reactor core calculations, radiative hydrodynamics problems, where the mesh is determined by hydrodynamic processes, and well-logging problems in which the media structure has very complicated geometry. Currently this is an area of very active research in numerical transport theory. main issues in developing numerical methods for solving the transport equation are the accuracy of the numerical solution and effectiveness of iteration procedure. The problem in case of unstructured grids is that it is very difficult to derive an iteration algorithm that will be unconditionally stable

Oregon department of transportation small business group twice-monthly payments pilot project : summary report.

Science.gov (United States)

2008-07-01

Oregon Department of Transportation (ODOT) recently completed a pilot study on small business payment practices. In the study, three pilot projects were tested where payments to small business contractors were changed from a monthly payment to twice-...

Study of Collaborative Management for Transportation Construction Project Based on BIM Technology

Science.gov (United States)

Jianhua, Liu; Genchuan, Luo; Daiquan, Liu; Wenlei, Li; Bowen, Feng

2018-03-01

Abstract. Building Information Modeling(BIM) is a building modeling technology based on the relevant information data of the construction project. It is an advanced technology and management concept, which is widely used in the whole life cycle process of planning, design, construction and operation. Based on BIM technology, transportation construction project collaborative management can have better communication through authenticity simulation and architectural visualization and can obtain the basic and real-time information such as project schedule, engineering quality, cost and environmental impact etc. The main services of highway construction management are integrated on the unified BIM platform for collaborative management to realize information intercommunication and exchange, to change the isolated situation of information in the past, and improve the level of information management. The final BIM model is integrated not only for the information management of project and the integration of preliminary documents and design drawings, but also for the automatic generation of completion data and final accounts, which covers the whole life cycle of traffic construction projects and lays a good foundation for smart highway construction.

Statement of work for the immobilized high-level waste transportation system, Project W-464

Energy Technology Data Exchange (ETDEWEB)

Mouette, P.

1998-06-24

The objective of this Statement of Work (SOW) is to present the scope, the deliverables, the organization, the technical and schedule expectations for the development of a Package Design Criteria (PDC), cost and schedule estimate for the acquisition of a transportation system for the Immobilized High-Level Waste (IHLW). This transportation system which includes the truck, the trailer, and a shielded cask will be used for on-site transportation of the IHLW canisters from the private vendor vitrification facility to the Hanford Site interim storage facility, i.e., vaults 2 and 3 of the Canister Storage Building (CSB). This Statement of Work asks Waste Management Federal Services, Inc., Northwest Operations, to provide Project W-464 with a Design Criteria Document, plus a life-cycle schedule and cost estimate for the acquisition of a transportation system (shielded cask, truck, trailer) for IHLW on-site transportation.

Airfoil shape for flight at subsonic speeds. [design analysis and aerodynamic characteristics of the GAW-1 airfoil

Science.gov (United States)

Whitcomb, R. T. (Inventor)

1976-01-01

An airfoil is examined that has an upper surface shaped to control flow accelerations and pressure distribution over the upper surface and to prevent separation of the boundary layer due to shock wave formulation at high subsonic speeds well above the critical Mach number. A highly cambered trailing edge section improves overall airfoil lifting efficiency. Diagrams illustrating supersonic flow and shock waves over the airfoil are shown.

Conceptual study of advanced VTOL transport aircraft engine; Kosoku VTOL kiyo engine no gainen kento

Energy Technology Data Exchange (ETDEWEB)

Saito, Y; Endo, M; Matsuda, Y; Sugiyama, N; Watanabe, M; Sugahara, N; Yamamoto, K [National Aerospace Laboratory, Tokyo (Japan)

1996-04-01

This report proposes the concept of an ultra-low noise engine for advanced high subsonic VTOL transport aircraft, and discusses its technological feasibility. As one of the applications of the previously reported `separated core turbofan engine,` the conceptual engine is composed of 3 core engines, 2 cruise fan engines for high subsonic cruising and 6 lift fan engines producing thrust of 98kN (10000kgf)/engine. The core turbojet engine bleeds a large amount of air at the outlet of a compressor to supply driving high-pressure air for fans to other engines. The lift fan engine is composed of a lift fan, driving combustor, turbine and speed reduction gear, and is featured by not only high operation stability and thin fan engine like a separated core engine but also ultra-low noise operation. The cruise fan engine adopts the same configuration as the lift fan engine. Since this engine configuration has no technological problems difficult to be overcome, its high technological feasibility is expected. 6 refs., 7 figs., 5 tabs.

Numerical investigation of the effects of compressibility on the flutter of a cantilevered plate in an inviscid, subsonic, open flow

Science.gov (United States)

Colera, Manuel; Pérez-Saborid, Miguel

2018-06-01

We have carried out a numerical study of the influence of the upstream Mach number on the flutter of a two-dimensional, cantilevered, flexible plate subject to a subsonic, inviscid, open flow. We have assumed a linear elastic model for the plate and that the fluid flow is governed by the linearized potential theory. The fluid equations are solved with a novel frequency-domain, finite differences method to obtain the generalized aerodynamic forces as a function of the plate displacements. Then, these generalized forces are coupled to the equation of motion of the plate and an eigenvalue analysis is performed to find the flutter point. The obtained results are in good agreement with those of related theoretical and experimental studies found in the literature. To the best of our knowledge, the analysis performed here is the first self-consistent, parametric study of the influence of the compressibility on the flutter point of a two-dimensional cantilevered plate in subsonic flow.

Distributed Propulsion featuring Boundary Layer Ingestion Engines for the Blended Wing Body Subsonic Transport

NARCIS (Netherlands)

Kok, H.J.M.; Voskuijl, M.; Van Tooren, M.J.L.

2010-01-01

The blended wing body aircraft is one of the promising contenders for the next generation large transport aircraft. This aircraft is particularly suitable for the use of boundary layer ingestion engines. Results published in literature suggest that it might be beneficial to have a large number of

PPP projects in transport

DEFF Research Database (Denmark)

Petersen, Ole Helby; Carpintero, Samuel

2014-01-01

Public–private partnerships (PPPs) have been extensively used in Spain for the procurement of light rail systems. This paper analyses five projects that have been in operation for more than five years. The authors examine the reasoning behind the selection of the PPP projects, risk......-sharing mechanisms, competition among private providers, and overall cost-effectiveness. The paper demonstrates a need for more rigorous assessments of the merits of PPP projects before they are initiated....

Feasibility Risk Assessment of Transport Infrastructure Projects: The CBA-DK Decision Support Model

DEFF Research Database (Denmark)

Salling, Kim Bang; Banister, David

2010-01-01

informed decision support towards decision-makers and stakeholders in terms of accumulated descending graphs. The decision support method developed in this paper aims to provide assistance in the analysis and ultimately the choice of action, while accounting for the uncertainties surrounding any transport......This paper presents the final version of the CBA-DK decision support model for assessment of transport projects. The model makes use of conventional cost-benefit analysis resulting in aggregated single point estimates and quantitative risk analysis using Monte Carlo simulation resulting in interval...... result, and the determination of suitable probability distributions. Use is made of the reference class forecasting information, such as that developed in Optimism Bias for adjustments to investment decisions that relate to all modes of transport. The CBA-DK decision support model results in more...

Computerized transportation model for the NRC Physical Protection Project. Versions I and II

International Nuclear Information System (INIS)

Anderson, G.M.

1978-01-01

Details on two versions of a computerized model for the transportation system of the NRC Physical Protection Project are presented. The Version I model permits scheduling of all types of transport units associated with a truck fleet, including truck trailers, truck tractors, escort vehicles and crews. A fixed-fleet itinerary construction process is used in which iterations on fleet size are required until the service requirements are satisfied. The Version II model adds an aircraft mode capability and provides for a more efficient non-fixed-fleet itinerary generation process. Test results using both versions are included

Chernobyl Studies Project - working group 7.0 environmental transport and health effects

International Nuclear Information System (INIS)

Hendrickson, S.M.

1994-01-01

The DOE-funded Chernobyl Studies Project was begun as part of a cooperative agreement between the US and the former USSR, (quote) To develop jointly methods to project rapidly the health effects of any future reactor accident (quote). Most of the initial tasks for this project are completed or near completion. The focus has now turned primarily to the issue of health effects from the Chernobyl accident. Currently, we are extensively engaged in case-control and cohort studies of thyroid diseases among Belarussian children and in the Ukraine. A major part of the effort is providing methods and applications of dose reconstruction and providing support and equipment for the medical teams. This document contains reports on progress in the following task areas: Management; External Dose; Hydrological Transport; Chromosome Painting Dosimetry; Stochastic Effects; Thyroid Studies; and Leukemia Studies

The model evaluation of subsonic aircraft effect on the ozone and radiative forcing

Energy Technology Data Exchange (ETDEWEB)

Rozanov, E.; Zubov, V.; Egorova, T.; Ozolin, Y. [Main Geophysical Observatory, St.Petersburg (Russian Federation)

1997-12-31

Two dimensional transient zonally averaged model was used for the evaluation of the effect of subsonic aircraft exhausts upon the ozone, trace gases and radiation in the troposphere and lower stratosphere. The mesoscale transformation of gas composition was included on the base of the box model simulations. It has been found that the transformation of the exhausted gases in sub-grid scale is able to influence the results of the modelling. The radiative forcing caused by gas, sulfate aerosol, soot and contrails changes was estimated as big as 0.12-0.15 W/m{sup 2} (0.08 W/m{sup 2} globally and annually averaged). (author) 10 refs.

The model evaluation of subsonic aircraft effect on the ozone and radiative forcing

Energy Technology Data Exchange (ETDEWEB)

Rozanov, E; Zubov, V; Egorova, T; Ozolin, Y [Main Geophysical Observatory, St.Petersburg (Russian Federation)

1998-12-31

Two dimensional transient zonally averaged model was used for the evaluation of the effect of subsonic aircraft exhausts upon the ozone, trace gases and radiation in the troposphere and lower stratosphere. The mesoscale transformation of gas composition was included on the base of the box model simulations. It has been found that the transformation of the exhausted gases in sub-grid scale is able to influence the results of the modelling. The radiative forcing caused by gas, sulfate aerosol, soot and contrails changes was estimated as big as 0.12-0.15 W/m{sup 2} (0.08 W/m{sup 2} globally and annually averaged). (author) 10 refs.

Quality Metrics in Neonatal and Pediatric Critical Care Transport: A National Delphi Project.

Science.gov (United States)

Schwartz, Hamilton P; Bigham, Michael T; Schoettker, Pamela J; Meyer, Keith; Trautman, Michael S; Insoft, Robert M

2015-10-01

The transport of neonatal and pediatric patients to tertiary care facilities for specialized care demands monitoring the quality of care delivered during transport and its impact on patient outcomes. In 2011, pediatric transport teams in Ohio met to identify quality indicators permitting comparisons among programs. However, no set of national consensus quality metrics exists for benchmarking transport teams. The aim of this project was to achieve national consensus on appropriate neonatal and pediatric transport quality metrics. Modified Delphi technique. The first round of consensus determination was via electronic mail survey, followed by rounds of consensus determination in-person at the American Academy of Pediatrics Section on Transport Medicine's 2012 Quality Metrics Summit. All attendees of the American Academy of Pediatrics Section on Transport Medicine Quality Metrics Summit, conducted on October 21-23, 2012, in New Orleans, LA, were eligible to participate. Candidate quality metrics were identified through literature review and those metrics currently tracked by participating programs. Participants were asked in a series of rounds to identify "very important" quality metrics for transport. It was determined a priori that consensus on a metric's importance was achieved when at least 70% of respondents were in agreement. This is consistent with other Delphi studies. Eighty-two candidate metrics were considered initially. Ultimately, 12 metrics achieved consensus as "very important" to transport. These include metrics related to airway management, team mobilization time, patient and crew injuries, and adverse patient care events. Definitions were assigned to the 12 metrics to facilitate uniform data tracking among programs. The authors succeeded in achieving consensus among a diverse group of national transport experts on 12 core neonatal and pediatric transport quality metrics. We propose that transport teams across the country use these metrics to

Packaging design criteria (onsite) project W-520 immobilized low-activity waste transportation system

International Nuclear Information System (INIS)

BOEHNKE, W.M.

2001-01-01

A plan is currently in place to process the high-level radioactive wastes that resulted from uranium and plutonium recovery operations from Spent Nuclear Fuel at the Hanford Site, Richland, Washington. Currently, millions of gallons of high-level radioactive waste in the form of liquids, sludges, and saltcake are stored in many large underground tanks onsite. This waste will be processed and separated into high-level and low-activity fractions. Both fractions will then be vitrified (i.e., blended with molten borosilicate glass) in order to encapsulate the toxic radionuclides. The immobilized low-activity waste (ILAW) glass will be poured into LAW canisters, allowed to cool and harden to solid form, sealed by welding, and then transported to a double-lined trench in the 200 East Area for permanent disposal. This document presents the packaging design criteria (PDC) for an onsite LAW transportation system, which includes the ILAW canister, ILAW package, and transport vehicle and defines normal and accident conditions. This PDC provides the basis for the ILAW onsite transportation system design and fabrication and establishes the transportation safety criteria that the design will be evaluated against in the Package Specific Safety Document (PSSD). It provides the criteria for the ILAW canister, cask and transport vehicles and defines normal and accident conditions. The LAW transportation system is designed to transport stabilized waste from the vitrification facility to the ILAW disposal facility developed by Project W-520. All ILAW transport will take place within the 200 East Area (all within the Hanford Site)

How do I manage and staff for intelligent transportation systems? : thinking outside the box : a cross-cutting study : maximizing project resources and advancing coordination

Science.gov (United States)

2000-08-01

Intelligent transportation systems (ITS) projects often need staff with skills that are not resident in traditional transportation organizations. Therefore, project administrators must sometimes look beyond the usual staffing methods to fill these po...

Environmental impact assessment of transportation projects: An analysis using an integrated GIS, remote sensing, and spatial modeling approach

Science.gov (United States)

El-Gafy, Mohamed Anwar

Transportation projects will have impact on the environment. The general environmental pollution and damage caused by roads is closely associated with the level of economic activity. Although Environmental Impact Assessments (EIAs) are dependent on geo-spatial information in order to make an assessment, there are no rules per se how to conduct an environmental assessment. Also, the particular objective of each assessment is dictated case-by-case, based on what information and analyses are required. The conventional way of Environmental Impact Assessment (EIA) study is a time consuming process because it has large number of dependent and independent variables which have to be taken into account, which also have different consequences. With the emergence of satellite remote sensing technology and Geographic Information Systems (GIS), this research presents a new framework for the analysis phase of the Environmental Impact Assessment (EIA) for transportation projects based on the integration between remote sensing technology, geographic information systems, and spatial modeling. By integrating the merits of the map overlay method and the matrix method, the framework analyzes comprehensively the environmental vulnerability around the road and its impact on the environment. This framework is expected to: (1) improve the quality of the decision making process, (2) be applied both to urban and inter-urban projects, regardless of transport mode, and (3) present the data and make the appropriate analysis to support the decision of the decision-makers and allow them to present these data to the public hearings in a simple manner. Case studies, transportation projects in the State of Florida, were analyzed to illustrate the use of the decision support framework and demonstrate its capabilities. This cohesive and integrated system will facilitate rational decisions through cost effective coordination of environmental information and data management that can be tailored to

Problems of increased transport load as a result of implementation of projects of high-rise constructions

Science.gov (United States)

Provotorov, Ivan; Gasilov, Valentin; Anisimova, Nadezhda

2018-03-01

The structure of problems of high-rise construction us suggested, which includes the impact on environment, design solutions, transportation problems, financial costs for construction and operation, and others. Positive and negative aspects of high-rise construction are considered. One of the basic problems of high-rise construction is the problem of increased transport load. Construction of the subway on the basis of the concession mechanism, with the use of unmanned control of rolling stock is proposed as the most expedient solution. An evaluation of the effectiveness of this project is presented, it shows quite high performance indicators for a private investor. Main problems that the project implementation may face in conditions of lack of scientific and methodological support are outlined.

Radiation transport and energetics of laser-driven half-hohlraums at the National Ignition Facility

Energy Technology Data Exchange (ETDEWEB)

Moore, A. S. [Directorate Science and Technology, AWE Aldermaston, Reading (United Kingdom); Cooper, A. B.R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Schneider, M. B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); MacLaren, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Graham, P. [Directorate Science and Technology, AWE Aldermaston, Reading (United Kingdom); Lu, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Seugling, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Satcher, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Klingmann, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Comley, A. J. [Directorate Science and Technology, AWE Aldermaston, Reading (United Kingdom); Marrs, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); May, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Widmann, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Glendinning, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Castor, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sain, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Back, C. A. [General Atomics, San Diego, CA (United States); Hund, J. [General Atomics, San Diego, CA (United States); Baker, K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hsing, W. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Foster, J. [Directorate Science and Technology, AWE Aldermaston, Reading (United Kingdom); Young, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Young, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2014-06-01

Experiments that characterize and develop a high energy-density half-hohlraum platform for use in bench-marking radiation hydrodynamics models have been conducted at the National Ignition Facility (NIF). Results from the experiments are used to quantitatively compare with simulations of the radiation transported through an evolving plasma density structure, colloquially known as an N-wave. A half-hohlraum is heated by 80 NIF beams to a temperature of 240 eV. This creates a subsonic di usive Marshak wave which propagates into a high atomic number Ta₂O₅ aerogel. The subsequent radiation transport through the aerogel and through slots cut into the aerogel layer is investigated. We describe a set of experiments that test the hohlraum performance and report on a range

EU Transport GHG. Routes to 2050 II Project. Developing a better understanding of the secondary impacts and key sensitivities for the decarbonisation of the EU's transport sector by 2050

Energy Technology Data Exchange (ETDEWEB)

Hill, N.; Brannigan, C. [AEA Technology plc, London (United Kingdom); Smokers, R. [TNO, Delft (Netherlands); Schroten, A.; Vam Essen, H. [CE Delft, Delft (Netherlands); Skinner, I. [Transport and Environmental Policy Research TEPR, London (United Kingdom)

2012-07-15

The title study directly builds on the work previously completed under the EU Transport GHG: Routes to 2050 project. This new work (dubbed EU Transport GHG: Routes to 2050 II) started in January 2011 and was completed in March 2012. The outputs from this new project help to support the Commission in prioritising and developing their strategy for reducing GHG emissions from the transport sector. CE Delft successfully organised the stakeholder engagement as well as the in-depth research on several topics: greenhouse gas (GHG) emissions from vehicle production and infrastructure development, CO2 reduction costs, co-benefits of GHG policies and knock-on consequences of such policies. Also alternative economic development paths were investigated, such as paths that could be less transport intensive, but still deliver increasing levels of prosperity.

An analysis of the correlations between the turbulent flow and the sound pressure fields of subsonic jets

OpenAIRE

Bogey , Christophe; Bailly , Christophe

2007-01-01

International audience; Noise generation is investigated in subsonic isothermal round jets at Mach numbers M =0.6 and M =0.9, with Reynolds numbers ReD =1700 and ReD 105, using causality methods on data provided by large-eddy simulations. The correlations between broadband sound pressure signals and broadband turbulence signals along the jet axis and the shear layer are calculated. The normalized correlations are found to be significant between the pressure emitted in the downstream direction...

Aero-acoustic simulation of a subsonic hot jet; Simulation aeroacoustique d'un jet chaud subsonique

Energy Technology Data Exchange (ETDEWEB)

Biancherin, A.; Rahier, G.; Prieur, J.; Vuillot, F.; Lupoglazoff, N.

2002-07-01

This paper presents a numerical simulation of subsonic a hot jet (M 0,7) and its acoustic analysis. The MSD code of the ONERA is used to resolve the Navier-Stokes equations. A detailed study, parametric and theoretical is realized to analyze the influence of the formulation, the position, the part and the nature of the control surface on the acoustic calculation results. The acoustic predictions in far field are compared to measures realized by the ONERA in the anechoic CEPRA 19 wind tunnel. (A.L.B.)

Transportation of foreign-owned enriched uranium from the Republic of Georgia. Environmental assessment for Project Partnership

International Nuclear Information System (INIS)

1998-01-01

The Department of Energy (DOE) Office of Nonproliferation and National Security (NN) has prepared a classified environmental assessment to evaluate the potential environmental impact for the transportation of 5.26 kilograms of enriched uranium-235 in the form of nuclear fuel, from the Republic of Georgia to the United Kingdom. The nuclear fuel consists of primarily fresh fuel, but also consists of a small quantity (less than 1 kilogram) of partially-spent fuel. Transportation of the enriched uranium fuel would occur via US Air Force military aircraft under the control of the Defense Department European Command (EUCOM). Actions taken in a sovereign nation (such as the Republic of Georgia and the United Kingdom) are not subject to analysis in the environmental assessment. However, because the action would involve the global commons of the Black Sea and the North Sea, the potential impact to the global commons has been analyzed. Because of the similarities in the two actions, the Project Sapphire Environmental Assessment was used as a basis for assessing the potential impacts of Project Partnership. However, because Project Partnership involves a small quantity of partially-spent fuel, additional analysis was conducted to assess the potential environmental impacts and to consider reasonable alternatives as required by NEPA. The Project Partnership Environmental Assessment found the potential environmental impacts to be well below those from Project Sapphire

Projected effect of 2000-2050 changes in climate and emissions on aerosol levels in China and associated transboundary transport

Science.gov (United States)

We investigate projected 2000–2050 changes in concentrations of aerosols in China and the associated transboundary aerosol transport by using the chemical transport model GEOS-Chem driven by the Goddard Institute for Space Studies (GISS) general circulation model (GCM) 3 at 4° × ...

The BEST project - BioEthanol for the Sustainable Transportation - a contribution to the environment of the metropolis; O projeto BEST - BioEtanol para o Transporte Sustentavel - uma contribuicao ao meio ambiente das metropoles

Energy Technology Data Exchange (ETDEWEB)

Gonzalez Velazquez, Silvia Maria Stortini; Santos, Sandra Maria Apolinario; Moreira, Jose Roberto; Melo, Euler Hoffmann; Coelho, Suani Teixeira [Centro Nacional de Referencia em Biomassa (CENBIO), Sao Paulo, SP (Brazil)], E-mail: silvia@iee.usp.br

2010-07-01

The BEST Project - Bio Ethanol for the Sustainable Transportation was an initiative of the European Union, coordinated by the Stockholm City Hall, at Sweden. This project gave incentives the use of ethanol, replacing the Diesel fuel, at the public transportation in Brazil and in the world. The used vehicles in the tests were monitored and evaluated to demonstrate the efficiency and environmental energy of the ethanol, and after the results, the BEST project and the European Union gave recommendations for the formulation of public politics of incentives to the use of technology.

Overview of NASA Electrified Aircraft Propulsion Research for Large Subsonic Transports

Science.gov (United States)

Jansen, Ralph H.; Bowman, Cheryl; Jankovsky, Amy; Dyson, Rodger; Felder, James L.

2017-01-01

NASA is investing in Electrified Aircraft Propulsion (EAP) research as part of the portfolio to improve the fuel efficiency, emissions, and noise levels in commercial transport aircraft. Turboelectric, partially turboelectric, and hybrid electric propulsion systems are the primary EAP configurations being evaluated for regional jet and larger aircraft. The goal is to show that one or more viable EAP concepts exist for narrow body aircraft and mature tall-pole technologies related to those concepts. A summary of the aircraft system studies, technology development, and facility development is provided. The leading concept for mid-term (2035) introduction of EAP for a single aisle aircraft is a tube and wing, partially turbo electric configuration (STARC-ABL), however other viable configurations exist. Investments are being made to raise the TRL level of light weight, high efficiency motors, generators, and electrical power distribution systems as well as to define the optimal turbine and boundary layer ingestion systems for a mid-term tube and wing configuration. An electric aircraft power system test facility (NEAT) is under construction at NASA Glenn and an electric aircraft control system test facility (HEIST) is under construction at NASA Armstrong. The correct building blocks are in place to have a viable, large plane EAP configuration tested by 2025 leading to entry into service in 2035 if the community chooses to pursue that goal.

TRANSPORTATION INFORMATION CLEARINGHOUSE

OpenAIRE

Allen, Karin; Dijohn, Joseph; Misek, Shamus

2005-01-01

The Transportation Information Clearinghouse (TIC) Project was the result of collaboration among the Regional Transportation Authority, the Workforce Boards of Metropolitan Chicago and the Urban Transportation Center (UTC) at the University of Illinois at Chicago (UIC). The primary objective of the project was to identify privatelyprovided, employer-based, non-traditional transportation services in operation as well as specific information about these services in order for employers, Workforc...

Working Group 7.0 Environmental Transport and Health Effects, Chernobyl Studies Project. Progress report, October 1994 -- March 1995

International Nuclear Information System (INIS)

Anspaugh, L.R.; Hendrickson, S.M.

1995-01-01

This document presents the details from the working group 7.0 Chernobyl Studies Project. This working group looked at the environmental transport and health effects from the fallout due to the meltdown of Chernobylsk-4 reactor. Topics include: hydrological transport; chromosome painting dosimetry; EPR, TL and OSL dosimetry; stochastic effects; thyroid studies; and leukemia studies

Complex governance system issues for transportation renewal projects

Directory of Open Access Journals (Sweden)

Kelly Strong

2014-01-01

Full Text Available The use of public–private partnerships (PPPs is growing in the United States in response to reductions in funding combined with an aging highway transportation infrastructure. Many other countries have longer experience with PPP and a greater understanding of the issues surrounding their use. The main governance issues to be addressed in PPPs deal with risk-sharing, relationships, contracts, and legal framework, and standard processes within dedicated organizational units. These governance issues are examined in the context of a case study for the US 36 Phase II PPP in Colorado. Findings suggest that for the US Phase II project, governance issues are resolved through more relational forms than prescriptive contractual language. Colorado has established a dedicated organizational unit to facilitate the use of PPPs, but there exist no standards or best practices in the United States for procurement, concession terms, or risk-sharing.

Midwestern High-Level Radioactive Waste Transportation Project

International Nuclear Information System (INIS)

Sattler, L.R.

1992-02-01

In addition to arranging for storage and disposal of radioactive waste, the US Department of Energy (DOE) must develop a safe and efficient transportation system in order to deliver the material that has accumulated at various sites throughout the country. The ability to transport radioactive waste safely has been demonstrated during the past 20 years: DOE has made over 2,000 shipments of spent fuel and other wastes without any fatalities or environmental damage related to the radioactive nature of the cargo. To guarantee the efficiency of the transportation system, DOE must determine the optimal combination of rail transport (which allows greater payloads but requires special facilities) and truck transport Utilizing trucks, in turn, calls for decisions as to when to use legal weight trucks or, if feasible, overweight trucks for fewer but larger shipments. As part of the transportation system, the Facility Interface Capability Assessment (FICA) study contributes to DOE's development of transportation plans for specific facilities. This study evaluates the ability of different facilities to receive, load and ship the special casks in which radioactive materials will be housed during transport In addition, the DOE's Near-Site Transportation Infrastructure (NSTI) study (forthcoming) will evaluate the rail, road and barge access to 76 reactor sites from which DOE is obligated to begin accepting spent fuel in 1998. The NSTI study will also assess the existing capabilities of each transportation mode and route, including the potential for upgrade

A study on the impact of parameter uncertainty on the emission-based ranking of transportation projects.

Science.gov (United States)

2014-01-01

With the growing concern with air quality levels and, hence, the livability of urban regions in the nation, it has become increasingly common to incorporate vehicular emission considerations in the ranking of transportation projects. Network assignme...

Study of fuel systems for LH2-fueled subsonic transport aircraft, volume 1

Science.gov (United States)

Brewer, G. D.; Morris, R. E.; Davis, G. W.; Versaw, E. F.; Cunnington, G. R., Jr.; Riple, J. C.; Baerst, C. F.; Garmong, G.

1978-01-01

Several engine concepts examined to determine a preferred design which most effectively exploits the characteristics of hydrogen fuel in aircraft tanks received major emphasis. Many candidate designs of tank structure and cryogenic insulation systems were evaluated. Designs of all major elements of the aircraft fuel system including pumps, lines, valves, regulators, and heat exchangers received attention. Selected designs of boost pumps to be mounted in the LH2 tanks, and of a high pressure pump to be mounted on the engine were defined. A final design of LH2-fueled transport aircraft was established which incorporates a preferred design of fuel system. That aircraft was then compared with a conventionally fueled counterpart designed to equivalent technology standards.

Model analysis of the chemical conversion of exhaust species in the expanding plumes of subsonic aircraft

Energy Technology Data Exchange (ETDEWEB)

Moellhoff, M.; Hendricks, J.; Lippert, E.; Petry, H. [Koeln Univ. (Germany). Inst. fuer Geophysik und Meteorologie; Sausen, R. [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Oberpfaffenhofen (Germany). Inst. fuer Physik der Atmosphaere

1997-12-31

A box model and two different one-dimensional models are used to investigate the chemical conversion of exhaust species in the dispersing plume of a subsonic aircraft flying at cruise altitude. The effect of varying daytime of release as well as the impact of changing dispersion time is studied with special respect to the aircraft induced O{sub 3} production. Effective emission amounts for consideration in mesoscale and global models are calculated. Simulations with modified photolysis rates are performed to show the sensitivity of the photochemistry to the occurrence of cirrus clouds. (author) 8 refs.

Model analysis of the chemical conversion of exhaust species in the expanding plumes of subsonic aircraft

Energy Technology Data Exchange (ETDEWEB)

Moellhoff, M; Hendricks, J; Lippert, E; Petry, H [Koeln Univ. (Germany). Inst. fuer Geophysik und Meteorologie; Sausen, R [Deutsche Forschungsanstalt fuer Luft- und Raumfahrt e.V. (DLR), Oberpfaffenhofen (Germany). Inst. fuer Physik der Atmosphaere

1998-12-31

A box model and two different one-dimensional models are used to investigate the chemical conversion of exhaust species in the dispersing plume of a subsonic aircraft flying at cruise altitude. The effect of varying daytime of release as well as the impact of changing dispersion time is studied with special respect to the aircraft induced O{sub 3} production. Effective emission amounts for consideration in mesoscale and global models are calculated. Simulations with modified photolysis rates are performed to show the sensitivity of the photochemistry to the occurrence of cirrus clouds. (author) 8 refs.

Support of future lighthouse projects and beyond. Managing the transition to hydrogen for transport

International Nuclear Information System (INIS)

Ros, M.E.; Jeeninga, H.; Godfroij, P.

2007-06-01

Large scale demonstration projects as the 'Lighthouse projects' are an important step towards commercialisation. However, costs for disruptive technologies such as hydrogen, are high in the first phase of market introduction. Therefore, policy support is needed to facilitate the introduction of hydrogen. But, how can the government support and stimulate (early) market introduction and use of hydrogen in the transportation sector? What kind of policy instruments are needed in what phase of the introduction trajectory? And what are the current instruments in the EU and US? Can these affect the introduction of hydrogen in transport? Generally, the hydrogen chain can be stimulated by providing an investment subsidy, production subsidy, tax exemptions and a (production or sales) obligation. Technology specific configurations of these support mechanisms for the diverse technologies in the hydrogen chain have to be taken into account. Besides that the support measures have to act upon each other for every technology development stage. A comparison of the EU and US policies shows differences in the approach of bringing the hydrogen vehicles to the market. The amount of support differs. The US funds RD and D 50% and stimulates the market by obligating sales (ZEV obligation) and procurement, while the EU funds R and D 50%, demonstration 35% and is now looking into large scale demonstration projects, after which the commercial market introduction of hydrogen vehicles is envisaged

Support of future lighthouse projects and beyond. Managing the transition to hydrogen for transport

Energy Technology Data Exchange (ETDEWEB)

Ros, M.E.; Jeeninga, H.; Godfroij, P. [ECN Policy Studies, Petten (Netherlands)

2007-06-15

Large scale demonstration projects as the 'Lighthouse projects' are an important step towards commercialisation. However, costs for disruptive technologies such as hydrogen, are high in the first phase of market introduction. Therefore, policy support is needed to facilitate the introduction of hydrogen. But, how can the government support and stimulate (early) market introduction and use of hydrogen in the transportation sector? What kind of policy instruments are needed in what phase of the introduction trajectory? And what are the current instruments in the EU and US? Can these affect the introduction of hydrogen in transport? Generally, the hydrogen chain can be stimulated by providing an investment subsidy, production subsidy, tax exemptions and a (production or sales) obligation. Technology specific configurations of these support mechanisms for the diverse technologies in the hydrogen chain have to be taken into account. Besides that the support measures have to act upon each other for every technology development stage. A comparison of the EU and US policies shows differences in the approach of bringing the hydrogen vehicles to the market. The amount of support differs. The US funds RD and D 50% and stimulates the market by obligating sales (ZEV obligation) and procurement, while the EU funds R and D 50%, demonstration 35% and is now looking into large scale demonstration projects, after which the commercial market introduction of hydrogen vehicles is envisaged.

Low-Speed Stability-and-Control and Ground-Effects Measurements on the Industry Reference High Speed Civil Transport

Science.gov (United States)

Kemmerly, Guy T.; Campbell, Bryan A.; Banks, Daniel W.; Yaros, Steven F.

1999-01-01

As a part of a national effort to develop an economically feasible High Speed Civil Transport (HSCT), a single configuration has been accepted as the testing baseline by the organizations working in the High Speed Research (HSR) program. The configuration is based on a design developed by the Boeing Company and is referred to as the Reference H (Ref H). The data contained in this report are low-speed stability-and-control and ground-effect measurements obtained on a 0.06 scale model of the Ref H in a subsonic tunnel.

Replacement of the cross-site transfer system liquid waste transport alternatives evaluation, Project W-058

International Nuclear Information System (INIS)

Vo, D.V.; Epperson, E.M.

1995-05-01

This document examines high-/low-level radioactive liquid waste transport alternatives. Radioactive liquid waste will be transported from the 200 West Area to the 200 East Area and within the 200 East Areas for safe storage and disposal. The radioactive waste transport alternatives are the Aboveground Transport System (French LR-56 Cask System [3,800 L (1,000 gal)]), 19,000-L (5,000-gal) trailer tanker system, 75,700-L (20,000-gal) rail tanker system and Underground Transport System (buried pipe [unlimited transfer volume capability]). The evaluation focused on the following areas: initial project cost, operational cost, secondary waste generation, radiation exposure, and final decommissioning. The evaluation was based on the near term (1995 to 2005) estimated volume of 49.509 million L (13.063 million gal) and long term (1995 to 2028) estimated volume of 757.1 million L (200 million gal). The conclusion showed that the buried pipe (Underground Transport System) resulted in the lowest overall total cost for near and long term, the trailer container resulted in the highest total cost for near and long term, and the French truck was operationally impractical and cost prohibitive

Transport Project Evaluation

DEFF Research Database (Denmark)

Leleur, Steen

1996-01-01

Two main project evaluation approaches exist: cost-benefit analysis (CBA) and multi-criteria analysis (MCA). Related to a European road evaluation method (EURET 1.1) and the MCA-method, WARP, the paper proposes a set of so-called segregated investment return rates (SIRR) to integrate advantages...

Managing geotechnical risk on US design-build transport projects

Directory of Open Access Journals (Sweden)

Kevin McLain

2014-03-01

Full Text Available Awarding design-build (DB contracts before a complete subsurface investigation is completed, makes mitigating the risk of differing site conditions difficult, if not impossible. The purpose of the study was to identify effective practices for managing geotechnical risk in DB projects, and it reports the results of a survey that included responses from 42 of 50 US state departments of transportation and a content analysis of DB requests for proposals from 26 states to gauge the client’s perspective, as well as 11 structured interviews with DB contractors to obtain the perspective from the other side of the DB contract.  A suite of DB geotechnical risk manage tools is presented based on the results of the analysis. Effective practices were found in three areas: enhancing communications on geotechnical issues before final proposals are submitted; the use of project-specific differing site conditions clauses; and expediting geotechnical design reviews after award. The major finding is that contract verbiage alone is not sufficient to transfer the risk of changed site conditions. The agency must actively communicate all the geotechnical information on hand at the time of the DB procurement and develop a contract strategy that reduces/retires the risk of geotechnical uncertainty as expeditiously as possible after award.

The 12-foot pressure wind tunnel restoration project model support systems

Science.gov (United States)

Sasaki, Glen E.

1992-01-01

The 12 Foot Pressure Wind Tunnel is a variable density, low turbulence wind tunnel that operates at subsonic speeds, and up to six atmospheres total pressure. The restoration of this facility is of critical importance to the future of the U.S. aerospace industry. As part of this project, several state of the art model support systems are furnished to provide an optimal balance between aerodynamic and operational efficiency parameters. Two model support systems, the Rear Strut Model Support, and the High Angle of Attack Model Support are discussed. This paper covers design parameters, constraints, development, description, and component selection.

Airspace Systems Program: Next Generation Air Transportation System Concepts and Technology Development FY2010 Project Plan Version 3.0

Science.gov (United States)

Kopardekar, Parimal H.

2010-01-01

This document describes the FY2010 plan for the management and execution of the Next Generation Air Transportation System (NextGen) Concepts and Technology Development (CTD) Project. The document was developed in response to guidance from the Airspace Systems Program (ASP), as approved by the Associate Administrator of the Aeronautics Research Mission Directorate (ARMD), and from guidelines in the Airspace Systems Program Plan. Congress established the multi-agency Joint Planning and Development Office (JPDO) in 2003 to develop a vision for the 2025 Next Generation Air Transportation System (NextGen) and to define the research required to enable it. NASA is one of seven agency partners contributing to the effort. Accordingly, NASA's ARMD realigned the Airspace Systems Program in 2007 to "directly address the fundamental research needs of the Next Generation Air Transportation System...in partnership with the member agencies of the JPDO." The Program subsequently established two new projects to meet this objective: the NextGen-Airspace Project and the NextGen-Airportal Project. Together, the projects will also focus NASA s technical expertise and world-class facilities to address the question of where, when, how and the extent to which automation can be applied to moving aircraft safely and efficiently through the NAS and technologies that address optimal allocation of ground and air technologies necessary for NextGen. Additionally, the roles and responsibilities of humans and automation influence in the NAS will be addressed by both projects. Foundational concept and technology research and development begun under the NextGen-Airspace and NextGen-Airportal projects will continue. There will be no change in NASA Research Announcement (NRA) strategy, nor will there be any change to NASA interfaces with the JPDO, Federal Aviation Administration (FAA), Research Transition Teams (RTTs), or other stakeholders

Radiation transport and energetics of laser-driven half-hohlraums at the National Ignition Facility

Energy Technology Data Exchange (ETDEWEB)

Moore, A. S., E-mail: alastair.moore@physics.org; Graham, P.; Comley, A. J.; Foster, J. [Directorate Science and Technology, AWE Aldermaston, Reading RG7 4PR (United Kingdom); Cooper, A. B. R.; Schneider, M. B.; MacLaren, S.; Lu, K.; Seugling, R.; Satcher, J.; Klingmann, J.; Marrs, R.; May, M.; Widmann, K.; Glendinning, G.; Castor, J.; Sain, J.; Baker, K.; Hsing, W. W.; Young, B. [Lawrence Livermore National Laboratory, P.O. Box 808, Livermore, California 94551-0808 (United States); and others

2014-06-15

Experiments that characterize and develop a high energy-density half-hohlraum platform for use in benchmarking radiation hydrodynamics models have been conducted at the National Ignition Facility (NIF). Results from the experiments are used to quantitatively compare with simulations of the radiation transported through an evolving plasma density structure, colloquially known as an N-wave. A half-hohlraum is heated by 80 NIF beams to a temperature of 240 eV. This creates a subsonic diffusive Marshak wave, which propagates into a high atomic number Ta{sub 2}O{sub 5} aerogel. The subsequent radiation transport through the aerogel and through slots cut into the aerogel layer is investigated. We describe a set of experiments that test the hohlraum performance and report on a range of x-ray measurements that absolutely quantify the energetics and radiation partition inside the target.

Geographical influence on the radiation exposure of an air crew on board a subsonic aircraft

International Nuclear Information System (INIS)

Bottollier-Depois, J.F.; Spurny, F.; Votockova, I.

1996-01-01

Radiation fields on board a subsonic aircraft have been studied on board an Airbus A310-300 during the flights Prague - Abu Dhabi - Bangkok and Bangkok - Abu Dhabi - Prague, during February 1995. A complex set of measuring instruments has been used for these studies: tissue equivalent proportional counter, moderator-type neutron rem-meter, environmental radiation dose rate meter, thermoluminescent and track etch detectors and bubble detectors. The results obtained are presented and analyzed; they are compared with the results obtained in the flights Prague - Montreal - Prague. Conclusions concerning the influence of geographical parameters on the aircrew exposure levels are formulated. (author). 13 refs., 2 figs., 3 tabs

Steady, Oscillatory and Unsteady, Subsonic and Supersonic Aerodynamics (SOUSSA) for complex aircraft configurations

Science.gov (United States)

Morino, L.; Tseng, K.

1978-01-01

The Green's function method and the computer program SOUSSA (Steady Oscillatory and Unsteady Subsonic and Supersonic Aerodynamics) are reviewed. The Green's function method is applied to the fully unsteady potential equation yielding an integro-differential-delay equation. This equation is approximated by a set of differential-delay equations in time using the finite element method. The Laplace transform is used to yield a matrix relating the velocity potential to the normal wash. The matrix of the generalized aerodynamic forces is obtained by premultiplying and postmultiplying the matrices relating generalized forces to the potential and the normal wash by the generalized coordinates. The program SOUSSA is compared with existing numerical results. Results indicate that the program is not only general, flexible, and easy to use, but also accurate and fast.

Analysis of extreme values of the economic efficiency indicators of transport infrastructure projects

Science.gov (United States)

Korytárová, J.; Vaňková, L.

2017-10-01

Paper builds on previous research of the authors into the evaluation of economic efficiency of transport infrastructure projects evaluated by the economic efficiency ratio - NPV, IRR and BCR. Values of indicators and subsequent outputs of the sensitivity analysis show extremely favourable values in some cases. The authors dealt with the analysis of these indicators down to the level of the input variables and examined which inputs have a larger share of these extreme values. NCF for the calculation of above mentioned ratios is created by benefits that arise as the difference between zero and investment options of the project (savings in travel and operating costs, savings in travel time costs, reduction in accident costs and savings in exogenous costs) as well as total agency costs. Savings in travel time costs which contribute to the overall utility of projects by more than 70% appear to be the most important benefits in the long term horizon. This is the reason why this benefit emphasized. The outcome of the article has resulted how the particular basic variables contributed to the total robustness of economic efficiency of these project.

User's manual for the model interface and plugboard cabinets in the 14- by 22-foot subsonic tunnel

Science.gov (United States)

Askew, Robert B.; Quinto, P. Frank

1994-01-01

The primary method of connection between the wind tunnel model instrumentation and the data acquisition system in the 14- by 22-Foot Subsonic Tunnel is through the Model Interface (MIF) and Plugboard cabinets. The MIF and Plugboard cabinets allow versatility in the connection of the instrumentation to the different data systems in the facility. The User's Manual describes the components inside the MIF cabinet, the input and output of the MIF, and the MIF patchboard, and the Plugboard cabinets. There are examples of standard connections for most of the instrumentation used in the facility.

Grand challenge problems in environmental modeling and remediation: Groundwater contaminant transport. Final project report 1998

International Nuclear Information System (INIS)

1998-04-01

The over-reaching goal of the Groundwater Grand Challenge component of the Partnership in Computational Science (PICS) was to develop and establish the massively parallel approach for the description of groundwater flow and transport and to address the problem of uncertainties in the data and its interpretation. This necessitated the development of innovative algorithms and the implementation of massively parallel computational tools to provide a suite of simulators for groundwater flow and transport in heterogeneous media. This report summarizes the activities and deliverables of the Groundwater Grand Challenge project funded through the High Performance Computing grand challenge program of the Department of Energy from 1995 through 1997

Time-dependent Flow and Transport Calculations for Project Opalinus Clay (Entsorgungsnachweis)

International Nuclear Information System (INIS)

Kosakowski, G.

2004-07-01

This report describes two specific assessment cases used in the safety assessment for a proposed deep geological repository for spent fuel, high level waste and long-lived intermediate-level waste, sited in the Opalinus Clay of the Zuercher Weinland in northern Switzerland (Project Entsorgungsnachweis, NAG RA, 2002d). In this study the influence of time dependent flow processes on the radionuclide transport in the geosphere is investigated. In the Opalinus Clay diffusion dominates the transport of radionuclides, but processes exist that can locally increase the importance of the advective transport for some time. Two important cases were investigated: (1) glaciation-induced flow due to an additional overburden in the form of an ice shield of up to 400 m thickness and (2) fluid flow driven by tunnel convergence. For the calculations the code FRAC3DVS (Therrien and Sudicky, 1996) was used. FRAC3DVS solves the three-dimensional flow and transport equation in porous and fractured media. For the case of glaciation-induced flow (1) a two-dimensional reference model without glaciations was calculated. During the glaciations the geosphere release-rates are up to a factor of about 1.7 higher compared to the reference model. The influence of glaciations on the transport of cations or neutral species is less than for anions, since the importance of the advective transport for anions is higher due to the lower accessible porosity for anions. The increase in the release rates during glaciations is lower for sorbing compared to non-sorbing radionuclides. The influence of the tunnel convergence (2) on the transport of radionuclides in the geosphere is very small. Due to the higher source term the geosphere release rates are slightly higher if tunnel convergence is considered. In addition to the two assessment cases this report investigates the applicability of the one-dimensional approximation for modelling transport through the Opalinus Clay. For the reference case of the safety

Planning Public Transport

DEFF Research Database (Denmark)

Andersen, Jonas Lohmann Elkjær; Landex, Alex

2009-01-01

This good practice guide is composed for the master course 13120 Public Transport Planning held at the Department of Transport, Technical University of Denmark. It is intended to use as guide in the different planning aspects and assignments of the course. Since the course is about the planning...... of new public transport infrastructure this guide also focuses on the planning of new infrastructure. Furthermore, the new infrastructure in the course is expected to be a light rail and even though this guide aims at being general for public transport some of the issues evidently become more relevant...... will enable a capability for planning both bus and rail. The guide is build as a full sketch investigation of a new public transport project ranging chronological from project clarification to physical and timetable planning to traffic modeling and project appraisal. The same steps that are expected...

Chaos control for the plates subjected to subsonic flow

Science.gov (United States)

Norouzi, Hamed; Younesian, Davood

2016-07-01

The suppression of chaotic motion in viscoelastic plates driven by external subsonic air flow is studied. Nonlinear oscillation of the plate is modeled by the von-Kármán plate theory. The fluid-solid interaction is taken into account. Galerkin's approach is employed to transform the partial differential equations of the system into the time domain. The corresponding homoclinic orbits of the unperturbed Hamiltonian system are obtained. In order to study the chaotic behavior of the plate, Melnikov's integral is analytically applied and the threshold of the excitation amplitude and frequency for the occurrence of chaos is presented. It is found that adding a parametric perturbation to the system in terms of an excitation with the same frequency of the external force can lead to eliminate chaos. Variations of the Lyapunov exponent and bifurcation diagrams are provided to analyze the chaotic and periodic responses. Two perturbation-based control strategies are proposed. In the first scenario, the amplitude of control forces reads a constant value that should be precisely determined. In the second strategy, this amplitude can be proportional to the deflection of the plate. The performance of each controller is investigated and it is found that the second scenario would be more efficient.

High frequency flow-structural interaction in dense subsonic fluids

Science.gov (United States)

Liu, Baw-Lin; Ofarrell, J. M.

1995-01-01

Prediction of the detailed dynamic behavior in rocket propellant feed systems and engines and other such high-energy fluid systems requires precise analysis to assure structural performance. Designs sometimes require placement of bluff bodies in a flow passage. Additionally, there are flexibilities in ducts, liners, and piping systems. A design handbook and interactive data base have been developed for assessing flow/structural interactions to be used as a tool in design and development, to evaluate applicable geometries before problems develop, or to eliminate or minimize problems with existing hardware. This is a compilation of analytical/empirical data and techniques to evaluate detailed dynamic characteristics of both the fluid and structures. These techniques have direct applicability to rocket engine internal flow passages, hot gas drive systems, and vehicle propellant feed systems. Organization of the handbook is by basic geometries for estimating Strouhal numbers, added mass effects, mode shapes for various end constraints, critical onset flow conditions, and possible structural response amplitudes. Emphasis is on dense fluids and high structural loading potential for fatigue at low subsonic flow speeds where high-frequency excitations are possible. Avoidance and corrective measure illustrations are presented together with analytical curve fits for predictions compiled from a comprehensive data base.

Kelvin-Helmholtz evolution in subsonic cold streams feeding galaxies

Science.gov (United States)

Angulo, Adrianna; Coffing, S.; Kuranz, C.; Drake, R. P.; Klein, S.; Trantham, M.; Malamud, G.

2017-10-01

The most prolific star formers in cosmological history lie in a regime where dense filament structures carried substantial mass into the galaxy to sustain star formation without producing a shock. However, hydrodynamic instabilities present on the filament surface limit the ability of such structures to deliver dense matter deeply enough to sustain star formation. Simulations lack the finite resolution necessary to allow fair treatment of the instabilities present at the stream boundary. Using the Omega EP laser, we simulate this mode of galaxy formation with a cold, dense, filament structure within a hotter, subsonic flow and observe the interface evolution. Machined surface perturbations stimulate the development of the Kelvin-Helmholtz (KH) instability due to the resultant shear between the two media. A spherical crystal imaging system produces high-resolution radiographs of the KH structures along the filament surface. The results from the first experiments of this kind, using a rod with single-mode, long-wavelength modulations, will be discussed. This work is funded by the U.S. Department of Energy, through the NNSA-DS and SC-OFES Joint Program in High-Energy-Density Laboratory Plasmas, Grant Number DE-NA0002956, and the National Laser User Facility Program, Grant Number DE-NA0002719, and through.

Experimental investigation on a high subsonic compressor cascade flow

Directory of Open Access Journals (Sweden)

Zhang Haideng

2015-08-01

Full Text Available With the aim of deepening the understanding of high-speed compressor cascade flow, this paper reports an experimental study on NACA-65 K48 compressor cascade with high subsonic inlet flow. With the increase of passage pressurizing ability, endwall boundary layer behavior is deteriorated, and the transition zone is extended from suction surface to the endwall as the adverse pressure gradient increases. Cross flow from endwall to midspan, mixing of corner boundary layer and the main stream, and reversal flow on the suction surface are caused by corner separation vortex structures. Passage vortex is the main corner separation vortex. During its movement downstream, the size grows bigger while the rotating direction changes, forming a limiting circle. With higher incidence, corner separation is further deteriorated, leading to higher flow loss. Meanwhile, corner separation structure, flow mixing characteristics and flow loss distribution vary a lot with the change of incidence. Compared with low aspect-ratio model, corner separation of high aspect-ratio model moves away from the endwall and is more sufficiently developed downstream the cascade. Results obtained present details of high-speed compressor cascade flow, which is rare in the relating research fields and is beneficial to mechanism analysis, aerodynamic optimization and flow control design.

The Best Project: bioethanol for sustainable transport and public policies to encourage the use of ethanol; O Projeto Best: bioetanol para o transporte sustentavel e as politicas publicas de incentivo ao uso do etanol

Energy Technology Data Exchange (ETDEWEB)

Velazquez Gonzalez, Silvia Maria Stortini; Santos, Sandra Maria Apolinario; Moreira, Jose Roberto; Melo, Euler Hoffmann [Universidade Presbiteriana Mackenzie, Sao Paulo, SP (Brazil); Centro Nacional de Referencia em Biomassa (CENBIO), Sao Paulo, SP (Brazil)

2010-07-01

The usage of ethanol in buses is a reality in cities from Sweden, such as Stockholm. The technology of diesel bus adapted to operate with ethanol has been used in that country since 1985, with great success, mainly in the environmental point of view. With the intent of encouraging ethanol usage in urban public transportation aiming, among other goals, at the reduction of atmospheric pollution in the big urban centers, the BEST Project - BioEthanol for Sustainable Transport was created. Besides Sao Paulo (pioneer in the Americas), this project, encouraged by the European Union, counts with eight other cities located in Europe and Asia. In Brazil, the project was developed and coordinated by CENBIO - Brazilian Reference Center on Biomass, from the Electrotechnics and Energy Institute of USP. With the partnership of other institutions, the project is developed since 2007 and currently counts on two diesel buses adapted to operate with ethanol. The buses circulate in operatives from EMTU - Sao Paulo Metropolitan Company for Urban Transports, in the Jabaquara - Sao Mateus line, and in operative from SPTrans - Sao Paulo Transportations, in the Lapa - Vila Mariana corridor. This paper has as its purpose to present the BEST Project in Brazil, its partners and, mainly, the results from the demonstration tests performed in field, as well as the proposals of public policies that were elaborated and are being implemented. It is worth remembering that the technology of the buses pays attention to the EURO 5 strict emission Standards, a norm that was recently invigorated in Europe. (author)

Transport Phenomena Projects: Natural Convection between Porous, Concentric Cylinders--A Method to Learn and to Innovate

Science.gov (United States)

Saatadjian, Esteban; Lesage, Francois; Mota, Jose Paulo B.

2013-01-01

A project that involves the numerical simulation of transport phenomena is an excellent method to teach this subject to senior/graduate chemical engineering students. The subject presented here has been used in our senior/graduate course, it concerns the study of natural convection heat transfer between two concentric, horizontal, saturated porous…

Projection-Based Adaptive Backstepping Control of a Transport Aircraft for Heavyweight Airdrop

Directory of Open Access Journals (Sweden)

Ri Liu

2015-01-01

Full Text Available An autopilot inner loop that combines backstepping control with adaptive function approximation is developed for airdrop operations. The complex nonlinear uncertainty of the aircraft-cargo model is factorized into a known matrix and an uncertainty function, and a projection-based adaptive approach is proposed to estimate this function. Using projection in the adaptation law bounds the estimated function and guarantees the robustness of the controller against time-varying external disturbances and uncertainties. The convergence properties and robustness of the control method are proved via Lyapunov theory. Simulations are conducted under the condition that one transport aircraft performs a maximum load airdrop task at a height of 82 ft, using single row single platform mode. The results show good performance and robust operation of the controller, and the airdrop mission performance indexes are satisfied, even in the presence of ±15% uncertainty in the aerodynamic coefficients, ±0.01 rad/s pitch rate disturbance, and 20% actuators faults.

Analyzing the economic impacts of transportation projects.

Science.gov (United States)

2013-09-01

The main goal of the study is to explore methods, approaches and : analytical software tools for analyzing economic activity that results from largescale : transportation investments in Connecticut. The primary conclusion is that the : transportation...

Subsonic leaky Rayleigh waves at liquid-solid interfaces.

Science.gov (United States)

Mozhaev, V G; Weihnacht, M

2002-05-01

The paper is devoted to the study of leaky Rayleigh waves at liquid-solid interfaces close to the border of the existence domain of these modes. The real and complex roots of the secular equation are computed for interface waves at the boundary between water and a binary isotropic alloy of gold and silver with continuously variable composition. The change of composition of the alloy allows one to cross a critical velocity for the existence of leaky waves. It is shown that, contrary to popular opinion, the critical velocity does not coincide with the phase velocity of bulk waves in liquid. The true threshold velocity is found to be smaller, the correction being of about 1.45%. Attention is also drawn to the fact that using the real part of the complex phase velocity as a velocity of leaky waves gives only approximate value. The most interesting feature of the waves under consideration is the presence of energy leakage in the subsonic range of the phase velocities where, at first glance, any radiation by harmonic waves is not permitted. A simple physical explanation of this radiation with due regard for inhomogeneity of radiated and radiating waves is given. The controversial question of the existence of leaky Rayleigh waves at a water/ice interface is reexamined. It is shown that the solution considered previously as a leaky wave is in fact the solution of the bulk-wave-reflection problem for inhomogeneous waves.

Comparison of all-electric secondary power systems for civil transport

Science.gov (United States)

Renz, David D.

1992-01-01

Three separate studies have shown operational, weight, and cost advantages for commercial subsonic transport aircraft using an all-electric secondary power system. The first study in 1982 showed that all-electric secondary power systems produced the second largest benefit compared to four other technology upgrades. The second study in 1985 showed a 10 percent weight and fuel savings using an all-electric high frequency (20 kHz) secondary power system. The last study in 1991 showed a 2 percent weight savings using today's technology (400 Hz) in an all-electric secondary power system. This paper will compare the 20 kHz and 400 Hz studies, analyze the 2 to 10 percent difference in weight savings and comment on the common benefits of the all-electric secondary power system.

Trends in aircraft engines. Trends in aircraft gas turbines and subsonic engines

Energy Technology Data Exchange (ETDEWEB)

Murashima, Kanji

1988-06-10

While the emphasis of commercial, large aircraft engines is placed on low fuel consumption at high subsonic flight and the turbofan engines with high bypass ratio are dominating, high speed turboprop (ATP) of Mach 0.85 class with low fuel consumption are emerging. UHB with bypass ratio of 15 - 20 are planned with expection for application to intermediate size commercial planes. The pressure ratio is continuously rizing for improved cycle efficiency, reaching 35 - 40 in highest cases. Trends in design technique include: Use of computational aerodynamics and application of two-dimensional structural analysis and the digital simulation of engine characteristics. In the field of large, high bypass turbofan, serious competition is seen between GE and PNA at the thrust level of 5 - 60,000 pounds. Several engines for fighting planes have been approved in the type test and accepted as candidates for next generation of fighting planes including Japan. (15 figs, 36 refs)

A Laplace transform/potential-theoretic method for acoustic propagation in subsonic flows

CERN Document Server

Hariharan, S I

2003-01-01

This paper introduces a competitive computational approach for determining time-dependent far-field sound generated by subsonic flows around lifting airfoils. The procedure assumes the linearity of the sound field away from a bounded region surrounding the airfoil. It is assumed that the sound pressure on the boundary of this enclosed region (referred to as the Kirchhoff surface) is specified, possibly by another procedure such as solving the full Euler equations. Away from the Kirchhoff surface, the Euler equations are linearized about a uniform mean flow. It is well known that linearized Euler equations can be uncoupled into a scalar convective wave equation. However, due to the anisotropy present in the convective wave equation, it is difficult to compute solutions. In this context, direct numerical simulation of the convective wave equation requires proper numerical descriptions of far-field boundary conditions which is a non-trivial task. Moreover, if accurate far-field conditions can be formulated, the ...

A framework for considering climate change in transportation and land use scenario planning : lessons learned from an interagency pilot project on Cape Cod.

Science.gov (United States)

2011-07-01

The Interagency Transportation, Land Use, and Climate Change Pilot Project utilized a scenario planning process to develop a multi-agency transportation- and land use-focused development strategy for Cape Cod, Massachusetts, with the intention of ach...

49 CFR 633.11 - Covered projects.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Covered projects. 633.11 Section 633.11..., DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Oversight Services § 633.11 Covered projects. The Administrator may contract for project management oversight services when the...

Beyond emission targets: how to decarbonize the passenger transport sector? Results from the Deep Decarbonization Pathways Project for Transport (DDPP-T)

International Nuclear Information System (INIS)

2017-11-01

Reaching the ambitious climate objective of the Paris Agreement requires decreasing significantly sectoral emissions from the transport sector. However, the ambition pledged for the transport sector under the Nationally Determined Contributions (NDCs) remains very limited. The DDPP-T analyzes Paris-compatible sectoral strategies for the passenger transport that can serve to inform the 2018 Facilitative Dialogue and the preparation of future, more ambitious, NDCs by 2020. In a context of an expected steep increase in global mobility demand, deep decarbonization will require a mix of different 'well-known' options: the rapid diffusion of low-carbon vehicles and low-carbon fuels and the modal shift towards low-carbon modes like public transport and non-motorized transport (cycling and walking). However, while crucial, these options are not 'silver bullets' that on their own meet the decarbonization challenge, given their intrinsic individual limitations. The project adopts an integrated approach of sectoral deep decarbonization strategies articulating the diffusion of low-carbon technologies with the future of mobility and all its drivers, such as the demographic and economic situation, the localization of population centers, the transport and urban planning, the lifestyles and the features of mobility services. The strategies are context-specific in order to capture different country circumstances, and consider a long-term horizon to inform the short-term conditions enabling structural changes of the transport system. Building on four country analyses (France, Japan, Mexico and the United Kingdom), this Issue Brief derives five cross-cutting messages for a deep decarbonization of the passenger transport sector. Key messages: - Deep decarbonization of the passenger transport sector requires strong actions on four pillars of transformation. Only a consistent articulation of these synergistic pillars allows an effective deep decarbonization. - Deep

Aeroelastic Tailoring of Transport Aircraft Wings: State-of-the-Art and Potential Enabling Technologies

Science.gov (United States)

Jutte, Christine; Stanford, Bret K.

2014-01-01

This paper provides a brief overview of the state-of-the-art for aeroelastic tailoring of subsonic transport aircraft and offers additional resources on related research efforts. Emphasis is placed on aircraft having straight or aft swept wings. The literature covers computational synthesis tools developed for aeroelastic tailoring and numerous design studies focused on discovering new methods for passive aeroelastic control. Several new structural and material technologies are presented as potential enablers of aeroelastic tailoring, including selectively reinforced materials, functionally graded materials, fiber tow steered composite laminates, and various nonconventional structural designs. In addition, smart materials and structures whose properties or configurations change in response to external stimuli are presented as potential active approaches to aeroelastic tailoring.

Predictions of tracer transport in interwell tracer tests at the C-Hole complex. Yucca Mountain site characterization project report milestone 4077

International Nuclear Information System (INIS)

Reimus, P.W.

1996-09-01

This report presents predictions of tracer transport in interwell tracer tests that are to be conducted at the C-Hole complex at the Nevada Test Site on behalf of the Yucca Mountain Site Characterization Project. The predictions are used to make specific recommendations about the manner in which the tracer test should be conducted to best satisfy the needs of the Project. The objective of he tracer tests is to study flow and species transport under saturated conditions in the fractured tuffs near Yucca Mountain, Nevada, the site of a potential high-level nuclear waste repository. The potential repository will be located in the unsaturated zone within Yucca Mountain. The saturated zone beneath and around the mountain represents the final barrier to transport to the accessible environment that radionuclides will encounter if they breach the engineered barriers within the repository and the barriers to flow and transport provided by the unsaturated zone. Background information on the C-Holes is provided in Section 1.1, and the planned tracer testing program is discussed in Section 1.2

Literature Review for Texas Department of Transportation Research Project 0-4695: Guidance for Design in Areas of Extreme Bed-Load Mobility, Edwards Plateau, Texas

National Research Council Canada - National Science Library

Heitmuller, Franklin T; Asquith, William H; Fang, Xing; Thompson, David B; Wang, Keh-Han

2005-01-01

A review of the literature addressing sediment transport in gravel-bed river systems and structures designed to control bed-load mobility is provided as part of Texas Department of Transportation research project 0-4695...

The ISTIMES project: a new integrated system for monitoring critical transport infrastructures interested by natural hazards

Science.gov (United States)

Proto, Monica; Massimo, Bavusi; Francesco, Soldovieri

2010-05-01

The research project "Integrated System for Transport Infrastructure surveillance and Monitoring by Electromagnetic Sensing" (ISTIMES), was approved in the 7th Framework Programme, in the Joint Call ICT and Security and started on 1st July 2009. The purpose of ISTIMES project is to design, assess and promote an ICT-based system, exploiting distributed and local sensors, for non-destructive electromagnetic monitoring in order to achieve the critical transport infrastructures more reliable and safe. The transportation sector's components are susceptible to the consequences of natural disasters and can also be attractive as terrorist targets. The sector's size, its physically dispersed and decentralized nature, the many public and private entities involved in its operations, the critical importance of cost considerations, and the inherent requirement of convenient accessibility to its services by all users - make the transportation particularly vulnerable to security and safety threats. As well known, the surface transportation system consists of interconnected infrastructures including highways, transit systems, railroads, airports, waterways, pipelines and ports, and the vehicles, aircraft, and vessels that operate along these networks. Thus, interdependencies exist between transportation and nearly every other sector of the economy and the effective operation of this system is essential to the European economic productivity; therefore, transportation sector protection is of paramount importance since threats to it may impact other industries that rely on it. The system exploits an open network architecture that can accommodate a wide range of sensors, static and mobile, and can be easily scaled up to allow the integration of additional sensors and interfacing with other networks. It relies on heterogeneous state-of-the-art electromagnetic sensors, enabling a self-organizing, self-healing, ad-hoc networking of terrestrial sensors, supported by specific satellite

ADVANCED CUTTINGS TRANSPORT STUDY

Energy Technology Data Exchange (ETDEWEB)

Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira; Lei Zhou

2000-01-30

This is the second quarterly progress report for Year 2 of the ACTS project. It includes a review of progress made in Flow Loop development and research during the period of time between Oct 1, 2000 and December 31, 2000. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 2: Addition of a foam generation and breaker system), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 7): ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (d) Research project (Task 8): ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (e) Research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (g) Research on instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), and Foam properties while transporting cuttings. (Task 12), (h) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (i) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members. The tasks Completed During This Quarter are Task 7 and Task 8.

Intelligent Freigth Transport Systems

DEFF Research Database (Denmark)

Overø, Helene Martine; Larsen, Allan; Røpke, Stefan

2009-01-01

is to enhance the efficiency and lower the environmental impact in freight transport. In this paper, a pilot project involving real-time waste collection at a Danish waste collection company is described, and a solution approach is proposed. The problem corresponds to the dynamic version of the waste collection......The Danish innovation project entitled “Intelligent Freight Transport Systems” aims at developing prototype systems integrating public intelligent transport systems (ITS) with the technology in vehicles and equipment as well as the IT-systems at various transport companies. The objective...

Wind tunnel investigation of the interaction and breakdown characteristics of slender wing vortices at subsonic, transonic, and supersonic speeds

Science.gov (United States)

Erickson, Gary E.

1991-01-01

The vortex dominated aerodynamic characteristics of a generic 65 degree cropped delta wing model were studied in a wind tunnel at subsonic through supersonic speeds. The lee-side flow fields over the wing-alone configuration and the wing with leading edge extension (LEX) added were observed at M (infinity) equals 0.40 to 1.60 using a laser vapor screen technique. These results were correlated with surface streamline patterns, upper surface static pressure distributions, and six-component forces and moments. The wing-alone exhibited vortex breakdown and asymmetry of the breakdown location at the subsonic and transonic speeds. An earlier onset of vortex breakdown over the wing occurred at transonic speeds due to the interaction of the leading edge vortex with the normal shock wave. The development of a shock wave between the vortex and wing surface caused an early separation of the secondary boundary layer. With the LEX installed, wing vortex breakdown asymmetry did not occur up to the maximum angle of attack in the present test of 24 degrees. The favorable interaction of the LEX vortex with the wing flow field reduced the effects of shock waves on the wing primary and secondary vortical flows. The direct interaction of the wing and LEX vortex cores diminished with increasing Mach number. The maximum attainable vortex-induced pressure signatures were constrained by the vacuum pressure limit at the transonic and supersonic speeds.

Transportation Industry 2004

National Research Council Canada - National Science Library

Miller, Evan; Kathir, Nathan; Brogan, Dennis M

2004-01-01

.... Because the defense sector relies on commercial transportation for both peacetime activities and for power projection, senior military leaders must understand the global transportation industry...

25 CFR 170.405 - Can tribal transportation planning funds be used for road construction and other projects?

Science.gov (United States)

2010-04-01

... INTERIOR LAND AND WATER INDIAN RESERVATION ROADS PROGRAM Planning, Design, and Construction of Indian... funds be used for road construction and other projects? Yes, any tribe can request to have its planning... 25 Indians 1 2010-04-01 2010-04-01 false Can tribal transportation planning funds be used for road...

ADVANCED CUTTINGS TRANSPORT STUDY

Energy Technology Data Exchange (ETDEWEB)

Ergun Kuru; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Len Volk; Mark Pickell; Evren Ozbayoglu; Barkim Demirdal; Paco Vieira; Affonso Lourenco

1999-10-15

This report includes a review of the progress made in ACTF Flow Loop development and research during 90 days pre-award period (May 15-July 14, 1999) and the following three months after the project approval date (July15-October 15, 1999) The report presents information on the following specific subjects; (a) Progress in Advanced Cuttings Transport Facility design and development, (b) Progress report on the research project ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (c) Progress report on the research project ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (d) Progress report on the research project ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (e) Progress report on the research project ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Progress report on the instrumentation tasks (Tasks 11 and 12) (g) Activities towards technology transfer and developing contacts with oil and service company members.

Analysis of nonequilibrium chemical processes in the plume of subsonic and supersonic aircraft with hydrogen and hydrocarbon combustion engine

Energy Technology Data Exchange (ETDEWEB)

Starik, A.M.; Lebedev, A.B.; Titova, N.S. [Central Inst. of Aviation Motors, Moscow (Russian Federation)

1997-12-31

On the basic of quasi one dimensional mixing model the numerical analysis of nonequilibrium chemical processes in the plume of subsonic and hypersonic aircraft is presented. It was found that species HNO, HNO{sub 3}, HNO{sub 4}, N{sub 2}O{sub 5}, ClO{sub 2}, CH{sub 3}NO{sub 2} could be formed as a result of nonequilibrium processes in the plume and their concentrations can essentially exceed both background values in free stream of atmosphere and their values at the nozzle exit plane. (author) 10 refs.

Analysis of nonequilibrium chemical processes in the plume of subsonic and supersonic aircraft with hydrogen and hydrocarbon combustion engine

Energy Technology Data Exchange (ETDEWEB)

Starik, A M; Lebedev, A B; Titova, N S [Central Inst. of Aviation Motors, Moscow (Russian Federation)

1998-12-31

On the basic of quasi one dimensional mixing model the numerical analysis of nonequilibrium chemical processes in the plume of subsonic and hypersonic aircraft is presented. It was found that species HNO, HNO{sub 3}, HNO{sub 4}, N{sub 2}O{sub 5}, ClO{sub 2}, CH{sub 3}NO{sub 2} could be formed as a result of nonequilibrium processes in the plume and their concentrations can essentially exceed both background values in free stream of atmosphere and their values at the nozzle exit plane. (author) 10 refs.

Accounting for the inaccuracies in demand forecasts and construction cost estimations in transport project evaluation

DEFF Research Database (Denmark)

Salling, Kim Bang; Leleur, Steen

2014-01-01

For decades researchers have claimedthat particularly demand forecasts and construction cost estimations are assigned with/affected by a large degree of uncertainty. Massively, articles,research documents and reports agree that there exists a tendencytowards underestimating the costs...... in demand and cost estimations and hence the evaluation of transport infrastructure projects. Currently, research within this area is scarce and scattered with no commonagreement on how to embed and operationalise the huge amount of empiricaldata that exist within the frame of Optimism Bias. Therefore...... convertingdeterministic benefit-cost ratios (BCRs) into stochasticinterval results. A new data collection (2009–2013) forms the empirical basis for any risk simulation embeddedwithin the so-calledUP database (UNITE project database),revealing the inaccuracy of both construction costs and demandforecasts. Accordingly...

75 FR 19670 - Marine Highway Projects

Science.gov (United States)

2010-04-15

... DEPARTMENT OF TRANSPORTATION Maritime Administration Marine Highway Projects ACTION: Solicitation of applications for Marine highway projects. SUMMARY: The Department of Transportation is soliciting applications for Marine Highway Projects as specified in the America's Marine Highway Program Final Rule, MARAD...

The ARIPAR project: analysis of the major accident risks connected with industrial and transportation activities in the Ravenna area

International Nuclear Information System (INIS)

Egidi, Demetrio; Foraboschi, Franco P.; Spadoni, Gigliola; Amendola, Aniello

1995-01-01

The paper describes the ARIPAR project aimed at the assessment of the major accident risks connected with storage, process and transportation of dangerous substances in the densely populated Ravenna area in Italy, which includes a large complex of chemical and petrochemical plants and minor industries, essentially distributed around an important commercial port. Large quantities of dangerous goods are involved in various transportation forms connected with the industrial and commercial activity of the port. The project started by making a complete inventory of fixed installations and transportation activities capable of provoking major fire, explosion and toxic release events; then relevant accident scenarios were developed for the single hazard sources; probabilities were assigned to the events and consequences were evaluated; finally iso-risk contours and F-N diagrams were evaluated both for the single sources and for the overall area. This required the development of a particular methodology for analysis of area risk and of associated software packages which allowed examination of the relative importance of the different activities and typologies of materials involved. The methodological approach and the results have proved to be very useful for the priority-ranking of risk mitigating interventions and physical planning in a complex area

Interaction between plasma synthetic jet and subsonic turbulent boundary layer

Science.gov (United States)

Zong, Haohua; Kotsonis, Marios

2017-04-01

This paper experimentally investigates the interaction between a plasma synthetic jet (PSJ) and a subsonic turbulent boundary layer (TBL) using a hotwire anemometer and phase-locked particle imaging velocimetry. The PSJ is interacting with a fully developed turbulent boundary layer developing on the flat wall of a square wind tunnel section of 1.7 m length. The Reynolds number based on the freestream velocity (U∞ = 20 m/s) and the boundary layer thickness (δ99 = 34.5 mm) at the location of interaction is 44 400. A large-volume (1696 mm3) three-electrode plasma synthetic jet actuator (PSJA) with a round exit orifice (D = 2 mm) is adopted to produce high-speed (92 m/s) and short-duration (Tjet = 1 ms) pulsed jets. The exit velocity variation of the adopted PSJA in a crossflow is shown to remain almost identical to that in quiescent conditions. However, the flow structures emanating from the interaction between the PSJ and the TBL are significantly different from what were observed in quiescent conditions. In the midspan xy plane (z = 0 mm), the erupted jet body initially follows a wall-normal trajectory accompanied by the formation of a distinctive front vortex ring. After three convective time scales the jet bends to the crossflow, thus limiting the peak penetration depth to approximately 0.58δ99. Comparison of the normalized jet trajectories indicates that the penetration ability of the PSJ is less than steady jets with the same momentum flow velocity. Prior to the jet diminishing, a recirculation region is observed in the leeward side of the jet body, experiencing first an expansion and then a contraction in the area. In the cross-stream yz plane, the signature structure of jets in a crossflow, the counter-rotating vortex pair (CVP), transports high-momentum flow from the outer layer to the near-wall region, leading to a fuller velocity profile and a drop in the boundary layer shape factor (1.3 to 1.2). In contrast to steady jets, the CVP produced by the PSJ

Cortical compression rapidly trimmed transcallosal projections and altered axonal anterograde transport machinery.

Science.gov (United States)

Chen, Li-Jin; Wang, Yueh-Jan; Tseng, Guo-Fang

2017-10-24

Trauma and tumor compressing the brain distort underlying cortical neurons. Compressed cortical neurons remodel their dendrites instantly. The effects on axons however remain unclear. Using a rat epidural bead implantation model, we studied the effects of unilateral somatosensory cortical compression on its transcallosal projection and the reversibility of the changes following decompression. Compression reduced the density, branching profuseness and boutons of the projection axons in the contralateral homotopic cortex 1week and 1month post-compression. Projection fiber density was higher 1-month than 1-week post-compression, suggesting adaptive temporal changes. Compression reduced contralateral cortical synaptophysin, vesicular glutamate transporter 1 (VGLUT1) and postsynaptic density protein-95 (PSD95) expressions in a week and the first two marker proteins further by 1month. βIII-tubulin and kinesin light chain (KLC) expressions in the corpus callosum (CC) where transcallosal axons traveled were also decreased. Kinesin heavy chain (KHC) level in CC was temporarily increased 1week after compression. Decompression increased transcallosal axon density and branching profuseness to higher than sham while bouton density returned to sham levels. This was accompanied by restoration of synaptophysin, VGLUT1 and PSD95 expressions in the contralateral cortex of the 1-week, but not the 1-month, compression rats. Decompression restored βIII-tubulin, but not KLC and KHC expressions in CC. However, KLC and KHC expressions in the cell bodies of the layer II/III pyramidal neurons partially recovered. Our results show cerebral compression compromised cortical axonal outputs and reduced transcallosal projection. Some of these changes did not recover in long-term decompression. Copyright © 2017 IBRO. Published by Elsevier Ltd. All rights reserved.

The international intraval project to study validation of geosphere transport models for performance assessment of nuclear waste disposal

International Nuclear Information System (INIS)

1990-01-01

INTRAVAL is an international project concerned with the use of mathematical models for predicting the potential transport of radioactive substances in the geosphere. Such models are used to help assess the longterm safety of radioactive waste disposal systems. The INTRAVAL project was established to evaluate the validity of these models. Results from a set of selected laboratory and field experiments as well as studies of occurrences of radioactive substances in nature (natural analogues) are compared in a systematic way with model predictions. Discrepancies between observations and predictions are discussed and analyzed

Innovative Technologies in Transportation

Science.gov (United States)

2004-12-01

An historical overview of the transportation infrastructure of the United States and Texas is provided. Data for trends in transportation is analyzed and projections for the future are postulated. A survey of current technologies in transportation is...

A vadose zone Transport Processes Investigation within the glacial till at the Fernald Environmental Management Project

International Nuclear Information System (INIS)

Schwing, J.; Roepke, Craig Senninger; Brainard, James Robert; Glass, Robert John Jr.; Mann, Michael J.A.; Holt, Robert M..; Kriel, Kelly

2007-01-01

This report describes a model Transport Processes Investigation (TPI) where field-scale vadose zone flow and transport processes are identified and verified through a systematic field investigation at a contaminated DOE site. The objective of the TPI is to help with formulating accurate conceptual models and aid in implementing rational and cost effective site specific characterization strategies at contaminated sites with diverse hydrogeologic settings. Central to the TPI are Transport Processes Characterization (TPC) tests that incorporate field surveys and large-scale infiltration experiments. Hypotheses are formulated based on observed pedogenic and hydrogeologic features as well as information provided by literature searches. The field and literature information is then used to optimize the design of one or more infiltration experiments to field test the hypothesis. Findings from the field surveys and infiltration experiments are then synthesized to formulate accurate flow and transport conceptual models. Here we document a TPI implemented in the glacial till vadose zone at the Fernald Environmental Management Project (FEMP) in Fernald, Ohio, a US Department of Energy (DOE) uranium processing site. As a result of this TPI, the flow and transport mechanisms were identified through visualization of dye stain within extensive macro pore and fracture networks which provided the means for the infiltrate to bypass potential aquatards. Such mechanisms are not addressed in current vadose zone modeling and are generally missed by classical characterization methods

Arizona transportation history.

Science.gov (United States)

2011-12-01

The Arizona transportation history project was conceived in anticipation of Arizonas centennial, which will be : celebrated in 2012. Following approval of the Arizona Centennial Plan in 2007, the Arizona Department of : Transportation (ADOT) recog...

Improving Travel Projections for Public Transportation

Science.gov (United States)

1995-08-01

Public transportation use saves energy and reduces emissions by taking people : out of single passenger automobiles and putting them into high occupancy, energy : efficient transit vehicles. Furthermore, public transit ridership and vehicular : trip ...

COSIMA-DSS Evaluation System: A new Decision Support System for Large-Scale Transport Infrastructure Projects

DEFF Research Database (Denmark)

Salling, Kim Bang; Jensen, Anders Vestergaard; Leleur, Steen

2005-01-01

This paper presents a new decision support model COSIMA-DSS that examines socio-economic feasibility risks involved in the implementation of transport infrastructure projects. The model makes use of conventionally cost-benefit analysis embedded within a wider multi-criteria analysis. The basic...... approach set out in the paper looks upon the mix between so-called “hard” and “soft” evaluation criteria. Finally, a Monte-Carlo simulation is used to take account of the varying information relating to the different criteria....

Economic perspectives on transport and equality

OpenAIRE

Lewis, David

2011-01-01

Poverty, inequality and social exclusion are closely tied to personal mobility and the accessibility of goods and services. Evidence of the economic role of transport in promoting better living standards and greater wellbeing can be seen in the effects of both overall public investment in transport infrastructure, and in the impacts of specific transport policies, projects and multi-project plans.

Innovative finance : strategic research project.

Science.gov (United States)

2013-08-01

Its time to rethink how we fund transportation infrastructure because most transportation : experts agree: theres a transportation funding and financing crisis looming. : Projected revenues from current sources of transportation funding will am...

ADVANCED CUTTINGS TRANSPORT STUDY

Energy Technology Data Exchange (ETDEWEB)

Stefan Miska; Troy Reed; Ergun Kuru

2004-09-30

The Advanced Cuttings Transport Study (ACTS) was a 5-year JIP project undertaken at the University of Tulsa (TU). The project was sponsored by the U.S. Department of Energy (DOE) and JIP member companies. The objectives of the project were: (1) to develop and construct a new research facility that would allow three-phase (gas, liquid and cuttings) flow experiments under ambient and EPET (elevated pressure and temperature) conditions, and at different angle of inclinations and drill pipe rotation speeds; (2) to conduct experiments and develop a data base for the industry and academia; and (3) to develop mechanistic models for optimization of drilling hydraulics and cuttings transport. This project consisted of research studies, flow loop construction and instrumentation development. Following a one-year period for basic flow loop construction, a proposal was submitted by TU to the DOE for a five-year project that was organized in such a manner as to provide a logical progression of research experiments as well as additions to the basic flow loop. The flow loop additions and improvements included: (1) elevated temperature capability; (2) two-phase (gas and liquid, foam etc.) capability; (3) cuttings injection and removal system; (4) drill pipe rotation system; and (5) drilling section elevation system. In parallel with the flow loop construction, hydraulics and cuttings transport studies were preformed using drilling foams and aerated muds. In addition, hydraulics and rheology of synthetic drilling fluids were investigated. The studies were performed under ambient and EPET conditions. The effects of temperature and pressure on the hydraulics and cuttings transport were investigated. Mechanistic models were developed to predict frictional pressure loss and cuttings transport in horizontal and near-horizontal configurations. Model predictions were compared with the measured data. Predominantly, model predictions show satisfactory agreements with the measured data. As a

Evaluation of Mexican transportation infrastructure projects.

Science.gov (United States)

2009-01-01

This research examined the legal, financial, institutional and policy processes that Mexico uses to plan, finance, construct, and implement its transportation network. It documents through twelve case studies the state of the practice in planning, fi...

Plant Transporter Identification

DEFF Research Database (Denmark)

Larsen, Bo

Membrane transport proteins (transporters) play a critical role for numerous biological processes, by controlling the movements of ions and molecules in and out of cells. In plants, transporters thus function as gatekeepers between the plant and its surrounding environment and between organs......, tissues, cells and intracellular compartments. Since plants are highly compartmentalized organisms with complex transportation infrastructures, they consequently have many transporters. However, the vast majority of predicted transporters have not yet been experimentally verified to have transport...... activity. This project contains a review of the implemented methods, which have led to plant transporter identification, and present our progress on creating a high-throughput functional genomics transporter identification platform....

Acceleration, Transport, Forecasting and Impact of solar energetic particles in the framework of the 'HESPERIA' HORIZON 2020 project

Science.gov (United States)

Malandraki, Olga; Klein, Karl-Ludwig; Vainio, Rami; Agueda, Neus; Nunez, Marlon; Heber, Bernd; Buetikofer, Rolf; Sarlanis, Christos; Crosby, Norma

2017-04-01

High-energy solar energetic particles (SEPs) emitted from the Sun are a major space weather hazard motivating the development of predictive capabilities. In this work, the current state of knowledge on the origin and forecasting of SEP events will be reviewed. Subsequently, we will present the EU HORIZON2020 HESPERIA (High Energy Solar Particle Events foRecastIng and Analysis) project, its structure, its main scientific objectives and forecasting operational tools, as well as the added value to SEP research both from the observational as well as the SEP modelling perspective. The project addresses through multi-frequency observations and simulations the chain of processes from particle acceleration in the corona, particle transport in the magnetically complex corona and interplanetary space to the detection near 1 AU. Furthermore, publicly available software to invert neutron monitor observations of relativistic SEPs to physical parameters that can be compared with space-borne measurements at lower energies is provided for the first time by HESPERIA. In order to achieve these goals, HESPERIA is exploiting already available large datasets stored in databases such as the neutron monitor database (NMDB) and SEPServer that were developed under EU FP7 projects from 2008 to 2013. Forecasting results of the two novel SEP operational forecasting tools published via the consortium server of 'HESPERIA' will be presented, as well as some scientific key results on the acceleration, transport and impact on Earth of high-energy particles. Acknowledgement: This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement No 637324.

European Transportation Policy for better Integration. Shifting the Balance between the Modes of Transport

Directory of Open Access Journals (Sweden)

Ruhet Genç

2011-05-01

Full Text Available The increasing need for transportation and mobility of citizen gives raises the importance oftransportation policy. The development of the European transportation policy has a great significance for theEuropean Union. The common transportation policy of the European Union is reviewed and updated everynine years. The first common transportation policy of the European Commission was published in December1992. Besides the railway sector, most of the objectives listed in this policy were realized in ten years. In2001, the European Commission proffered a new transportation policy with sixty new measures. Thus, thispaper shows the importance of transportation projects -especially in the field of railways- for European Unionmember states. In accounting, cross-border sections of projects are more or less neglected, as member statestend to prioritize the development of sections of the projects, which are economically viable for themselves,thereby delaying the overall connectivity of the trans-European network. The railway modal is the hardestmodal to interoperate between the member countries. Therefore it is not a surprise that the objectives listed inthe first European transportation policy were not realized in the railway sector. There were enormousdifferences between railway systems before the European Union. Some of them still have an influence oncurrent railway infrastructure and operations today. To sum up, this research shall deal with the crucialaspects of common transportation policies as well as problems of its implications.

Scenarios, policies and impacts for the linked transport and energy systems. Results of the European TRIAS project

Energy Technology Data Exchange (ETDEWEB)

Schade, Wolfgang; Helfrich, Nicki [Fraunhofer-Institut fuer Systemtechnik und Innovationsforschung (ISI), Karlsruhe (Germany); Krail, Michael [Karlsruhe Univ. (T.H.) (Germany). Inst. fuer Wirtschaftspolitik und Wirtschaftsforschung; Fiorello, Davide; Fermi, Francesca [TRT Trasporti e Territori, Milan (Italy); Schade, Burkhard [European Commission Seville (ES). Institute for Prospective Technological Studies (IPTS)

2008-07-01

High oil prices and the growing awareness that this will not be a temporary but a permanent situation fosters the search for alternative fuels and new technologies to propel the transport system, which, so far, in Europe depends to more than 96% on fossil fuels. Two of these alternatives would be hydrogen and biofuels that both can be generated from a number of different sources including a number of non-fossil and renewable sources. The TRIAS project combined four models (ASTRA, POLES, VACLAV, Regio-SUSTAIN) to analyse the impacts of different policies that would foster the diffusion of alternative fuels into the transport system. The impact analysis covers the fields of transport, energy, environment, technology and economy. The basic conclusions that can be drawn are that such policies, if they are formulated in an appropriate manner, could stimulate investments and economic development on the one hand and on the other hand would have the potential to generate positive impacts in terms of reductions of CO{sub 2} emissions and increase of security of energy supply due to reduced imports of fossil fuels and the use of a greater diversity of fuels for transport. (orig.)

Manpower analysis in transportation safety. Final report

Energy Technology Data Exchange (ETDEWEB)

Bauer, C.S.; Bowden, H.M.; Colford, C.A.; DeFilipps, P.J.; Dennis, J.D.; Ehlert, A.K.; Popkin, H.A.; Schrader, G.F.; Smith, Q.N.

1977-05-01

The project described provides a manpower review of national, state and local needs for safety skills, and projects future manning levels for transportation safety personnel in both the public and private sectors. Survey information revealed that there are currently approximately 121,000 persons employed directly in transportation safety occupations within the air carrier, highway and traffic safety, motor carrier, pipeline, rail carrier, and marine carrier transportation industry groups. The projected need for 1980 is over 145,000 of which over 80 percent will be in highway safety. An analysis of transportation tasks is included, and shows ten general categories about which the majority of safety activities are focused. A skills analysis shows a generally high level of educational background and several years of experience are required for most transportation safety jobs. An overall review of safety programs in the transportation industry is included, together with chapters on the individual transportation modes.

Chernobyl Studies Project: Working group 7.0, Environmental transport and health effects. Progress report, March--September 1994

Energy Technology Data Exchange (ETDEWEB)

Anspaugh, L.R.; Hendrickson, S.M. [eds.

1994-12-01

In April 1988, the US and the former-USSR signed a Memorandum of Cooperation (MOC) for Civilian Nuclear Reactor Safety; this MOC was a direct result of the accident at the Chernobyl Nuclear Power Plant Unit 4 and the following efforts by the two countries to implement a joint program to improve the safety of nuclear power plants and to understand the implications of environmental releases. A Joint Coordinating Committee for Civilian Nuclear Reactor Safety (JCCCNRS) was formed to implement the MOC. The JCCCNRS established many working groups; most of these were the responsibility of the Nuclear Regulatory Commission, as far as the US participation was concerned. The lone exception was Working Group 7 on Environmental Transport and Health Effects, for which the US participation was the responsibility of the US Department of Energy (DOE). The purpose of Working Group 7 was succintly stated to be, ``To develop jointly methods to project rapidly the health effects of any future nuclear reactor accident.`` To implement the work DOE then formed two subworking groups: 7.1 to address Environmental Transport and 7.2 to address Health Effects. Thus, the DOE-funded Chernobyl Studies Project began. The majority of the initial tasks for this project are completed or near completion. The focus is now turned to the issue of health effects from the Chernobyl accident. Currently, we are involved in and making progress on the case-control and co-hort studies of thyroid diseases among Belarussian children. Dosimetric aspects are a fundamental part of these studies. We are currently working to implement similar studies in Ukraine. A major part of the effort of these projects is supporting these studies, both by providing methods and applications of dose reconstruction and by providing support and equipment for the medical teams.

Planning level assessment of greenhouse gas emissions for alternative transportation construction projects : carbon footprint estimator, phase II, volume I - GASCAP model.

Science.gov (United States)

2014-03-01

The GASCAP model was developed to provide a software tool for analysis of the life-cycle GHG : emissions associated with the construction and maintenance of transportation projects. This phase : of development included techniques for estimating emiss...

Underestimating Costs in Public Works Projects

DEFF Research Database (Denmark)

Flyvbjerg, Bent; Holm, Mette K. Skamris; Buhl, Søren L.

2002-01-01

This article presents results from the first statistically significant study of cost escalation in transportation infrastructure projects. Based on a sample of 258 transportation infrastructure projects worth $90 billion (U.S.), it is found with overwhelming statistical significance that the cost...... honest numbers should not trust the cost estimates and cost-benefit analyses produced by project promoters and their analysts. Independent estimates and analyses are needed as are institutional checks and balances to curb deception.......This article presents results from the first statistically significant study of cost escalation in transportation infrastructure projects. Based on a sample of 258 transportation infrastructure projects worth $90 billion (U.S.), it is found with overwhelming statistical significance that the cost...... estimates used to decide whether important infrastructure should be built are highly and systematically misleading. The result is continuous cost escalation of billions of dollars. The sample used in the study is the largest of its kind, allowing for the first time statistically valid conclusions regarding...

Cost Underestimation in Public Works Projects

DEFF Research Database (Denmark)

Flyvbjerg, Bent; Holm, Mette K. Skamris; Buhl, Søren L.

This article presents results from the first statistically significant study of cost escalation in transportation infrastructure projects. Based on a sample of 258 transportation infrastructure projects worth $90 billion (U.S.), it is found with overwhelming statistical significance that the cost...... honest numbers should not trust the cost estimates and cost-benefit analyses produced by project promoters and their analysts. Independent estimates and analyses are needed as are institutional checks and balances to curb deception.......This article presents results from the first statistically significant study of cost escalation in transportation infrastructure projects. Based on a sample of 258 transportation infrastructure projects worth $90 billion (U.S.), it is found with overwhelming statistical significance that the cost...... estimates used to decide whether important infrastructure should be built are highly and systematically misleading. The result is continuous cost escalation of billions of dollars. The sample used in the study is the largest of its kind, allowing for the first time statistically valid conclusions regarding...

Data acquisition of mass transport parameters

International Nuclear Information System (INIS)

Iwasaki, Riyo; Hama, Katsuhiro; Morikawa, Keita; Hosoya, Shinichi

2017-02-01

Tono Geoscience Center of Japan Atomic Energy Agency (JAEA) has been carrying out the Mizunami Underground Research Laboratory (MIU) Project, which is a scientific study understanding the deep geological environment as a basis of research and development for geological disposal of high level radioactive wastes. The aim of the MIU project is to establish comprehensive techniques for the investigation, analysis and assessment of the deep geological environment in fractured crystalline rock, and to develop a range of engineering techniques for deep underground application. This project has three overlapping phases: Surface-based investigation phase (Phase I), Construction phase (Phase II), and Operation phase (Phase III). Currently, the project is being carried out under the Phase III. Mass transport study is mainly performed as part of Phase III project. In Phase III, the goal of mass transport study is to obtain a better understanding of mass transport phenomena in the geological environment as well as to develop technologies for measurement of the mass transport parameters, model construction, numerical analysis and validation of those technologies. This study was planned to understand the influence of the geological characteristics of fracture on the mass transport parameters. This report presents the results of diffusion experiment, observation of polished thin section, sorption experiment and porophysicality measurement. (author)

Weather hazards and vulnerabilities for the European transport system - a risk panorama. EWENT project D5.1

Energy Technology Data Exchange (ETDEWEB)

Molarius, R.; Leviakangas, P.; Ronty, J.; Oiva, K. (eds.)

2012-09-15

This deliverable of EWENT project estimates the risks of extreme weather on European transport system. The main object of work package 5 in EWENT project was to perform a risk analysis based on impact and probability assessments carried out in earlier work packages (WP2-WP3). The results of WP 5 can be used as a starting point when deciding on the risk reduction measures, strategies and policies in the European Union. This deliverable also serves as a background material for the synthesis report (named shortly as Risk Panorama), which will summarise the findings of risk assessment and previous work packages. The methodological approach of EWENT is based on the generic risk management standard (IEC 60300-3-9) and starts with the identification of hazardous extreme weather phenomena, followed by an impact assessment and concluded by mitigation and risk control measures. This report pools the information from EWENT's earlier work packages, such as risk identification and estimation, into a 'risk panorama' and provides a holistic picture on the risks of extreme weather in different parts of Europe and EU transport network. The risk assessment is based on the definition of transport systems' vulnerability to extreme weather events in different countries and on calculations of the most probable causal chains, starting from adverse weather phenomena and ending up with events that pose harmful consequences to the transport systems in different climate regions. The latter part, the probabilistic section, is the hazard analysis. The vulnerability of a particular mode in a particular country is a function of exposure (indicated by transport or freight volumes and population density), susceptibility (infrastructure quality index, indicating overall resilience) and coping capacity (measured by GDP per capita). Hence, we define the extreme weather risk as Risk = hazard times vulnerability = P(negative consequences) times V[f(exposure, susceptibility, coping

Bentonite erosion: effects on the long term performance of the engineered barrier and radionuclide transport - The BELBAR project

International Nuclear Information System (INIS)

Sellin, P.; Sundman, D.; Bailey, L.; Missana, T.; Schaefer, T.; Cervinka, R.; Koskinen, K.

2012-01-01

Document available in extended abstract form only. BELBaR is a Collaborative Project within the Seventh Framework Programme of the European Atomic Energy Community (Euratom) for nuclear research and training activities. The main aim of BELBaR is to increase knowledge of the processes that control clay colloid stability, generation and its ability to transport radionuclides. The overall purpose of the project is to come up with a new way of treating issues in long-term safety/performance assessment. The project started March 1, 2012 and has a duration of 48 months. The project has 14 partners from seven European countries. The main aim of BELBaR is to reduce the uncertainties in the description of the effect of clay colloids on the long term performance of the engineered barrier and on radionuclide transport as illustrated in Figure 1. This is done by: - Improving the understanding on when bentonite colloids are unstable. For a given site/site evolution, this is critical information, since it determines whether or not clay colloids need to be included in the long-term assessment. - Improving the quantitative models for erosion on the bentonite barrier for the cases when the colloids are stable - Improving the understanding of how radionuclides attach to clay colloids. This information will be used to formulate improved transport models for the assessment of radionuclide transport in the geosphere. To meet the main aim a number of experimental and modelling activities will be undertaken within the project. BELBaR consists of six RTD (research and technical development) work packages and one project management work package. WP1 will have the responsibility to ensure that that the type and values of the parameters selected for experimental and modelling work are those that represent as much as possible the full range of conditions and situations that can be expected in a repository. Drawing on the work undertaken in WP 2 to 5, the general objective of this work package

Project structure plan requirements for the deconstruction projects

International Nuclear Information System (INIS)

Petrasch, Peter; Schmitt, Christian; Stapf, Meike

2011-01-01

The deconstruction of nuclear facilities requires due to the particular conditions and the size of the project a special project planning. The authors analyze the possible requirements to be fulfilled by a project structure plan for nuclear facilities, including personnel resources, organization structure, budget questions, operation and project oriented measures, possibility of modifications and supplements. Further topics include controlling and project realization procedures, documentation, third party activities (authorities, consultants, surveyors), logistics and transport, and radiation protection issues. Several questions remain for plants-specific planning, including the integration of the plant personnel, administrative work, project management, economic and financial issues, radioactive waste management issues.

Midwestern High-Level Radioactive Waste Transportation Project. Highway infrastructure report

Energy Technology Data Exchange (ETDEWEB)

Sattler, L.R.

1992-02-01

In addition to arranging for storage and disposal of radioactive waste, the US Department of Energy (DOE) must develop a safe and efficient transportation system in order to deliver the material that has accumulated at various sites throughout the country. The ability to transport radioactive waste safely has been demonstrated during the past 20 years: DOE has made over 2,000 shipments of spent fuel and other wastes without any fatalities or environmental damage related to the radioactive nature of the cargo. To guarantee the efficiency of the transportation system, DOE must determine the optimal combination of rail transport (which allows greater payloads but requires special facilities) and truck transport Utilizing trucks, in turn, calls for decisions as to when to use legal weight trucks or, if feasible, overweight trucks for fewer but larger shipments. As part of the transportation system, the Facility Interface Capability Assessment (FICA) study contributes to DOE`s development of transportation plans for specific facilities. This study evaluates the ability of different facilities to receive, load and ship the special casks in which radioactive materials will be housed during transport In addition, the DOE`s Near-Site Transportation Infrastructure (NSTI) study (forthcoming) will evaluate the rail, road and barge access to 76 reactor sites from which DOE is obligated to begin accepting spent fuel in 1998. The NSTI study will also assess the existing capabilities of each transportation mode and route, including the potential for upgrade.

Assessing Sensitiveness to Transport

DEFF Research Database (Denmark)

Lieb, Christoph; Suter, Stefan; Sánchez, Alfredo

Summary The EU-project ASSET (ASessing SEnsitiveness to Transport) aims at developing and implementing a concise concept to assess transport sensitive areas (TSA) in a European context, i.e. areas in which transport leads to more serious impacts than in other areas. The aim of work package 2 (WP2...

Draft project management update to the Iowa DOT Project Development Manual : final report.

Science.gov (United States)

2016-08-01

This work supported drafting project management guidance for the Iowa Department of Transportation (DOT). The goal is to : incorporate a greater focus on project management in their project development process. : A technical advisory committee (TAC) ...

Chernobyl Studies Project - working group 7.0 environmental transport and health effects. Progress report, October 1993--January 1994

Energy Technology Data Exchange (ETDEWEB)

Hendrickson, S.M. [ed.

1994-03-01

The DOE-funded Chernobyl Studies Project was begun as part of a cooperative agreement between the US and the former USSR, (quote) To develop jointly methods to project rapidly the health effects of any future reactor accident (quote). Most of the initial tasks for this project are completed or near completion. The focus has now turned primarily to the issue of health effects from the Chernobyl accident. Currently, we are extensively engaged in case-control and cohort studies of thyroid diseases among Belarussian children and in the Ukraine. A major part of the effort is providing methods and applications of dose reconstruction and providing support and equipment for the medical teams. This document contains reports on progress in the following task areas: Management; External Dose; Hydrological Transport; Chromosome Painting Dosimetry; Stochastic Effects; Thyroid Studies; and Leukemia Studies.

Table - Impacts of the Proposed Transport Rule on Counties with Monitors Projected to have Ozone and/or Fine Particle Air Quality Problems

Science.gov (United States)

This table shows the impacts of the proposed Transport Rule on Counties with Monitors Projected to have Ozone and/or Fine Particle Air Quality Problems, both with and without the Cross-State Air Pollution Rule.

P.I.A.F.E project: long distance transport of low energy exotic ions

International Nuclear Information System (INIS)

Nibart, V.

1996-01-01

The aim of the PIAFE project is the long distance (400 m) transport of a low energy radioactive ion beam from the ILL (Institut Laue Langevin) to the ISN (Institut des Sciences Nucleaires) of Grenoble (France). The production, extraction, ionization and mass separation of ions is performed by the ILL, while the transformation of ions into multicharged ions, their stripping and acceleration is carried out at the ISN. Theoretical and experimental studies for a simple an original guidance solution have shown that such a long transport, even delicate, should not encounter any major difficulty. The main objectives of this thesis is the technical realization of a 18 m section of this transport line. The problem of supports and focalizing elements alignment has been solved together with the other problems such as: the central trajectory deviation due to alignment defects and to the Earth's magnetic field; the particle losses due to charge exchange with the residual gas and the emittance increase by Coulomb scattering. It has been demonstrated that a 90% transmission can be obtained using a 25 keV energy and a 10 -7 mbar vacuum. Experimental measurements using a rubidium ion source have allowed to validate a theoretical model of emittance increase due to the residual gas-ions interactions. The increase of emittance with respect to the pressure has been measured using four residual gases of different mass. (J.S.). 29 refs., 61 figs., 19 tabs., 8 photos., 4 appends

Computational Fluid Dynamic Simulation (CFD and Experimental Study on Wing-external Store Aerodynamic Interference of a Subsonic Fighter Aircraft

Directory of Open Access Journals (Sweden)

Tholudin Mat Lazim

2003-01-01

Full Text Available The main objective of the present work is to study the effect of an external store on a subsonic fighter aircraft. Generally most modern fighter aircrafts are designed with an external store installation. In this study, a subsonic fighter aircraft model has been manufactured using a computer numerical control machine for the purpose of studying the effect of the aerodynamic interference of the external store on the flow around the aircraft wing. A computational fluid dynamic (CFD simulation was also carried out on the same configuration. Both the CFD and the wind tunnel testing were carried out at a Reynolds number 1.86×105 to ensure that the aerodynamic characteristic can certify that the aircraft will not be face any difficulties in its stability and controllability. Both the experiments and the simulation were carried out at the same Reynolds number in order to verify each other. In the CFD simulation, a commercial CFD code was used to simulate the interference and aerodynamic characteristics of the model. Subsequently, the model together with an external store was tested in a low speed wind tunnel with a test section sized 0.45 m×0.45 m. Measured and computed results for the two-dimensional pressure distribution were satisfactorily comparable. There is only a 19% deviation between pressure distribution measured in wind tunnel testing and the result predicted by the CFD. The result shows that the effect of the external storage is only significant on the lower surface of the wing and almost negligible on the upper surface of the wing. Aerodynamic interference due to the external store was most evident on the lower surface of the wing and almost negligible on the upper surface at a low angle of attack. In addition, the area of influence on the wing surface by the store interference increased as the airspeed increased.

Multi-scale transport in the DIII-D ITER baseline scenario with direct electron heating and projection to ITER

Science.gov (United States)

Grierson, B. A.; Staebler, G. M.; Solomon, W. M.; McKee, G. R.; Holland, C.; Austin, M.; Marinoni, A.; Schmitz, L.; Pinsker, R. I.; DIII-D Team

2018-02-01

Multi-scale fluctuations measured by turbulence diagnostics spanning long and short wavelength spatial scales impact energy confinement and the scale-lengths of plasma kinetic profiles in the DIII-D ITER baseline scenario with direct electron heating. Contrasting discharge phases with ECH + neutral beam injection (NBI) and NBI only at similar rotation reveal higher energy confinement and lower fluctuations when only NBI heating is used. Modeling of the core transport with TGYRO using the TGLF turbulent transport model and NEO neoclassical transport reproduces the experimental profile changes upon application of direct electron heating and indicates that multi-scale transport mechanisms are responsible for changes in the temperature and density profiles. Intermediate and high-k fluctuations appear responsible for the enhanced electron thermal flux, and intermediate-k electron modes produce an inward particle pinch that increases the inverse density scale length. Projection to ITER is performed with TGLF and indicates a density profile that has a finite scale length due to intermediate-k electron modes at low collisionality and increases the fusion gain. For a range of E × B shear, the dominant mechanism that increases fusion performance is suppression of outward low-k particle flux and increased density peaking.

Come rain or shine: Multi-model Projections of Climate Hazards affecting Transportation in the South Central United States

Science.gov (United States)

Mullens, E.; Mcpherson, R. A.

2016-12-01

This work develops detailed trends in climate hazards affecting the Department of Transportation's Region 6, in the South Central U.S. Firstly, a survey was developed to gather information regarding weather and climate hazards in the region from the transportation community, identifying key phenomena and thresholds to evaluate. Statistically downscaled datasets were obtained from the Multivariate Adaptive Constructed Analogues (MACA) project, and the Asynchronous Regional Regression Model (ARRM), for a total of 21 model projections, two coupled model intercomparisons (CMIP3, and CMIP5), and four emissions pathways (A1Fi, B1, RCP8.5, RCP4.5). Specific hazards investigated include winter weather, freeze-thaw cycles, hot and cold extremes, and heavy precipitation. Projections for each of these variables were calculated for the region, utilizing spatial mapping, and time series analysis at the climate division level. The results indicate that cold-season phenomena such as winter weather, freeze-thaw, and cold extremes, decrease in intensity and frequency, particularly with the higher emissions pathways. Nonetheless, specific model and downscaling method yields variability in magnitudes, with the most notable decreasing trends late in the 21st century. Hot days show a pronounced increase, particularly with greater emissions, producing annual mean 100oF day frequencies by late 21st century analogous to the 2011 heatwave over the central Southern Plains. Heavy precipitation, evidenced by return period estimates and counts-over-thresholds, also show notable increasing trends, particularly between the recent past through mid-21st Century. Conversely, mean precipitation does not show significant trends and is regionally variable. Precipitation hazards (e.g., winter weather, extremes) diverge between downscaling methods and their associated model samples much more substantially than temperature, suggesting that the choice of global model and downscaled data is particularly

Literature review for Texas Department of Transportation Research Project 0-4695: Guidance for design in areas of extreme bed-load mobility, Edwards Plateau, Texas

Science.gov (United States)

Heitmuller, Franklin T.; Asquith, William H.; Fang, Xing; Thompson, David B.; Wang, Keh-Han

2005-01-01

A review of the literature addressing sediment transport in gravel-bed river systems and structures designed to control bed-load mobility is provided as part of Texas Department of Transportation research project 0–4695: Guidance for Design in Areas of Extreme Bed-Load Mobility. The study area comprises the western half of the Edwards Plateau in central Texas. Three primary foci of the literature review are journal articles, edited volumes, and government publications. Major themes within the body of literature include deterministic sediment transport theory and equations, development of methods to measure and analyze fluvial sediment, applications and development of theory in natural channels and flume experiments, and recommendations for river management and structural design. The literature review provides an outline and foundation for the research project to characterize extreme bed-load mobility in rivers and streams across the study area. The literature review also provides a basis upon which potential modifications to low-water stream-crossing design in the study area can be made.

Mitigation of socio-economic impacts due to the construction of energy projects in rural communities: an evaluation of the Hartsville nuclear power plant transportation-mitigation program

International Nuclear Information System (INIS)

Whitney, T.C.

1982-01-01

This study analyzes the effects of a commuter ride-sharing program in mitigating the harmful socio-economic impacts of a short-term, labor-intensive nuclear-power-plant construction project. The major hypothesis is that transportation-mitigation programs are more cost-effective in reducing the undesirable socio-economic impacts of large-scale construction projects than programs designed to mitigate impacts through the provision of public services for migrating workers. The dissertation begins by delineating the socio-economic effects of large-scale construction projects in rural areas. It proceeds to show how some of the deleterious impacts were mitigated using a commuter ride-sharing program. After the range of potential socio-economic impacts was established, a framework was developed to evaluate the effects of the transportation-mitigation program in mediating the harmful impacts. The framework involved the integration of the cost-benefit technique with social-impact assessment. The evaluation was grounded in a comparative framework whereby the Hartsville project community was compared with a similar community undergoing the construction of a nuclear power plant but without a commuter ride-sharing program, and a community not experiencing a major construction project. The research findings indicated that the transportation-mitigation program substantially reduced the in-migration of construction workers into the Hartsville-Trousdale County area. Further, the program was cost effective, with a benefit-cost ratio of 2.5 and net benefits totalling 28 million dollars

Extension of analytical indicial aerodynamics to generic trapezoidal wings in subsonic flow

Directory of Open Access Journals (Sweden)

Andrea DA RONCH

2018-04-01

Full Text Available Analytical indicial aerodynamic functions are calculated for several trapezoidal wings in subsonic flow, with a Mach number 0.3 ≤ Ma ≤ 0.7. The formulation herein proposed extends well-known aerodynamic theories, which are limited to thin aerofoils in incompressible flow, to generic trapezoidal wing planforms. Firstly, a thorough study is executed to assess the accuracy and limitation of analytical predictions, using unsteady results from two state-of-the-art computational fluid dynamics solvers as cross-validated benchmarks. Indicial functions are calculated for a step change in the angle of attack and for a sharp-edge gust, each for four wing configurations and three Mach numbers. Then, analytical and computational indicial responses are used to predict dynamic derivatives and the maximum lift coefficient following an encounter with a one-minus-cosine gust. It is found that the analytical results are in excellent agreement with the computational results for all test cases. In particular, the deviation of the analytical results from the computational results is within the scatter or uncertainty in the data arising from using two computational fluid dynamics solvers. This indicates the usefulness of the developed analytical theories. Keywords: Analytical approach, CFD, Compressible flow, Gust response, Indicial aerodynamics, Trapezoidal wing

Ocean transportation

National Research Council Canada - National Science Library

Frankel, Ernst G; Marcus, Henry S

1973-01-01

.... This analysis starts with a review of ocean transportation demand and supply including projections of ship capacity demand and world shipbuilding capacity under various economic and political assumptions...

Interactions of Transportation and Telecommunications Behaviors

Science.gov (United States)

Dholakia, N.; Mundorf, N.; Dholakia, R. R.; Xiao, J. J.

2002-05-01

This project was designed as a social science complement to the engineering studies supported by the University of Rhode Island (URI) Transportation Center (URITC). The project developed a behavioral knowledge base about the actual and intended transport and telecommunications behaviors of transportation users, with a particular focus on southern Rhode Island. Background studies, drawing from literature on telecommuting and travel behavior, led to the development of a generalized framework to understand the transport-telecom interactions. In particular, we developed working papers dealing with transport aspects of e-retailing and distance education. In the empirical part of this project, two major field studies were completed. The first of these was a survey of URI students, probing their car travel, carpool, bus use, and Internet use behaviors. The students were surveyed first by telephone, selected randomly from a list obtained from the Register's office. A total of 220 students responded to the telephone survey. Characteristics of the telephone survey respondents are shown in Appendix B. This was supplemented by an in-class survey of 107 students conveniently selected from the courses taught by the research faculty. This supplementary questionnaire probed the students more deeply regarding their motivations for transportation and technology use issues. The second major field study was a mail survey of southern Rhode Island residents. In this survey, we not only investigated actual travel and transport behaviors but also measured attitudes towards the environment and alternative transport and telecommuting solutions. At the time of writing this report, about 850 individuals had responded to our mail questionnaire. Characteristics of the resident sample are described in Appendix B. The results have laid the groundwork for our second year project where we plan to study the impact of specific interventions on transportation and telecommuting attitudes and intentions.

49 CFR 633.25 - Contents of a project management plan.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Contents of a project management plan. 633.25... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.25 Contents of a project management plan. At a minimum, a recipient's project management plan shall include...

49 CFR 633.27 - Implementation of a project management plan.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Implementation of a project management plan. 633... TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PROJECT MANAGEMENT OVERSIGHT Project Management Plans § 633.27 Implementation of a project management plan. (a) Upon approval of a project management plan by...

Canada's Intelligent Transportation Systems (ITS) : deployment and integration plan : applicant's guide

Science.gov (United States)

2000-02-01

This document is the applicant's guide for proposing intelligent transportation systems projects to Transport Canada and details such matters as eligibility, Transport Canada's program objectives and assessment of projects

Nicaragua - Transportation

Data.gov (United States)

Millennium Challenge Corporation — The evaluation examines impacts of the Transportation Project in three ways. First, we calculate economic rates of return associated with reduced user costs for each...

Using Travel Diary Data to Estimate the Emissions Impacts of Transportation Strategies: The Puget Sound Telecommuting Demonstration Project

OpenAIRE

Henderson, Dennis K.; Koenig, Brett E.; Mokhtarian, Patricia L.

1996-01-01

Transportation control measures are often implemented for their environmental benefits, but there is a need to quantify what benefits actually occur. Telecommuting has the potential to reduce the number of daily trips and miles traveled with personal vehicles and, consequently, the overall emissions resulting from vehicle activity. This search studies the emissions impacts of telecommuting for the participants of the Puget Sound Telecommuting Demonstration Project (PSTDP). The California Air ...

Comparison of analytical and experimental subsonic steady and unsteady pressure distributions for a high-aspect-ratio-supercritical wing model with oscillating control surfaces

Science.gov (United States)

Mccain, W. E.

1982-01-01

The results of a comparative study using the unsteady aerodynamic lifting surface theory, known as the Doublet Lattice method, and experimental subsonic steady- and unsteady-pressure measurements, are presented for a high-aspect-ratio supercritical wing model. Comparisons of pressure distributions due to wing angle of attack and control-surface deflections were made. In general, good correlation existed between experimental and theoretical data over most of the wing planform. The more significant deviations found between experimental and theoretical data were in the vicinity of control surfaces for both static and oscillatory control-surface deflections.

Final Report for the project titled "Enabling Supernova Computations by Integrated Transport and Provisioning Methods Optimized for Dedicated Channels"

Energy Technology Data Exchange (ETDEWEB)

Malathi Veeraraghavan

2007-10-31

A high-speed optical circuit network is one that offers users rate-guaranteed connectivity between two endpoints, unlike today’s IP-routed Internet in which the rate available to a pair of users fluctuates based on the volume of competing traffic. This particular research project advanced our understanding of circuit networks in two ways. First, transport protocols were developed for circuit networks. In a circuit network, since bandwidth resources are reserved for each circuit on an end-to-end basis (much like how a person reserves a seat on every leg of a multi-segment flight), and the sender is limited to send at the rate of the circuit, there is no possibility of congestion during data transfer. Therefore, no congestion control functions are necessary in a transport protocol designed for circuits. However, error control and flow control are still required because bits can become errored due to noise and interference even on highly reliable optical links, and receivers can, due to multitasking or other reasons, not deplete the receive buffer fast enough to keep up with the sending rate (e.g., if the receiving host is multitasking between receiving a file transfer and some other computation). In this work, we developed two transport protocols for circuits, both of which are described below. Second, this project developed techniques for internetworking different types of connection-oriented networks, which are of two types: circuit-switched or packet-switched. In circuit-switched networks, multiplexing on links is “position based,” where “position” refers to the frequency, time slot, and port (fiber), while connection-oriented packet-switched networks use packet header information to demultiplex packets and switch them from node to node. The latter are commonly referred to as virtual circuit networks. Examples of circuit networks are time-division multiplexed Synchronous Optical Network/Synchronous Digital Hierarchy (SONET/SDH) and Wavelength Division

Development of Transportation Package for Medical and Industrial Radioisotope

Energy Technology Data Exchange (ETDEWEB)

Seo, K. S.; Lee, J. C.; Bang, K. S. (and others)

2007-06-15

The objective of this project is development of RI transport package and establishment of transportation system. This report describes the objective of project, necessaries, state of related technology, scope and results, proposal for application etc. The scope of the project consist of establishment of performance test system for type-A package for medical use, development of type-B package for industrial use and development of casting technology for DU shield and evaluation of shielding efficiency. The research results obtained from this project are expected to be utilized as a basic data for design, analysis, test and license of transport package.

Pac-Rim LNG project : final project report specifications

International Nuclear Information System (INIS)

1996-01-01

PAC-RIM LNG Inc. has submitted a proposal to the British Columbia Environmental Assessment Office, to develop a liquefied natural gas project which would purchase pipeline quality natural gas from sources in northeast British Columbia and Alberta and transport it via a dedicated pipeline system to a LNG processing plant on tidewater on the Pacific coast. The project would include storage and processing facilities and a marine loading terminal. This document sets out the final project report specifications prepared by the Project Committee on the basis of input received from the public, First Nations and federal, provincial and local governments

Transportation Energy Futures Series: Freight Transportation Demand: Energy-Efficient Scenarios for a Low-Carbon Future

Energy Technology Data Exchange (ETDEWEB)

Grenzeback, L. R.; Brown, A.; Fischer, M. J.; Hutson, N.; Lamm, C. R.; Pei, Y. L.; Vimmerstedt, L.; Vyas, A. D.; Winebrake, J. J.

2013-03-01

Freight transportation demand is projected to grow to 27.5 billion tons in 2040, and to nearly 30.2 billion tons in 2050. This report describes the current and future demand for freight transportation in terms of tons and ton-miles of commodities moved by truck, rail, water, pipeline, and air freight carriers. It outlines the economic, logistics, transportation, and policy and regulatory factors that shape freight demand, the trends and 2050 outlook for these factors, and their anticipated effect on freight demand. After describing federal policy actions that could influence future freight demand, the report then summarizes the capabilities of available analytical models for forecasting freight demand. This is one in a series of reports produced as a result of the Transportation Energy Futures project, a Department of Energy-sponsored multi-agency effort to pinpoint underexplored strategies for reducing GHGs and petroleum dependence related to transportation.

TRANSPORTATION PLANNING AND THE USE OF TRANSCAD

Directory of Open Access Journals (Sweden)

Peter van der Waerden

2010-04-01

Full Text Available

Transportation planning consists of a variety of activities that can be supported by Geographical Information Systems (GIS. This kind of system offers many functions that can be used for both spatial and transportation analyses. TransCAD is a GIS-package with specific transportation analysis tools. This package offers different functions for network analysis, transportation modeling, route analysis and traffic assignment. This paper describes the role of GIS for transportation planning which will be illustrated by several research projects. Special attention is given to the functions TransCAD offers for transportation analysis purposes. Three projects conducted by the Urban Planning Group of the Eindhoven University of Technology illustrate some of these functions in more detail. The projects concern the simulation of activity patterns, the evaluation of planning scenarios, and the simulation of parking behavior. Experiences from several research projects show that TransCAD is very useful for transportation planning activities. The open architecture that makes it possible to implement any self-made procedure in the TransCAD environment appears to be one of the most important characteristics of this software. Also the amount of network analyses such as shortest path finding and traffic assignment makes the package valuable. Still, improvements are desirable, for example a better structured users' manual, more advanced options for presentation and for modeling and statistical fitting of distribution. Some of these requests are implemented in the new Windows version of TransCAD 3.0.

Assessing the costs attributed to project delay during project pre-construction stages.

Science.gov (United States)

2016-03-01

This project for the Texas Department of Transportation (TxDOT) developed a simple but sound : methodology for estimating the cost of delaying most types of highway projects. Researchers considered the : cost of delays during the pre-construction pha...

The INTRACOIN model comparison project

International Nuclear Information System (INIS)

Lawson, G.

1982-01-01

The International Nuclide Transport Code Intercomparison (INTRACOIN) project is investigating the different models and associated computer codes describing the transport of radionuclides in flowing ground-water following the disposal of solid radioactive wastes in geologic formations. Level I of the project has shown good agreement in the numerical accuracy of most of the codes. In Level II the ability of the codes to model field experiments with radioactive tracers will be compared. Level III will show to what extent the adoption of different models and computer codes for the transport of radionuclides with ground water affects the results of repository assessments. (U.K.)

Integrating Life-cycle Assessment into Transport Cost-benefit Analysis

DEFF Research Database (Denmark)

Manzo, Stefano; Salling, Kim Bang

2016-01-01

Traditional transport Cost-Benefit Analysis (CBA) commonly ignores the indirect environmental impacts of an infrastructure project deriving from the overall life-cycle of the different project components. Such indirect impacts are instead of key importance in order to assess the long......-term sustainability of a transport infrastructure project. In the present study we suggest to overcome this limit by combining a conventional life-cycle assessment approach with standard transport cost-benefit analysis. The suggested methodology is tested upon a case study project related to the construction of a new...... fixed link across the Roskilde fjord in Frederikssund (Denmark). The results are then compared with those from a standard CBA framework. The analysis shows that indirect environmental impacts represent a relevant share of the estimated costs of the project, clearly affecting the final project evaluation...

Environmentally Responsible Aviation (ERA) Project - N+2 Advanced Vehicle Concepts Study and Conceptual Design of Subscale Test Vehicle (STV) Final Report

Science.gov (United States)

Bonet, John T.; Schellenger, Harvey G.; Rawdon, Blaine K.; Elmer, Kevin R.; Wakayama, Sean R.; Brown, Derrell L.; Guo, Yueping

2011-01-01

NASA has set demanding goals for technology developments to meet national needs to improve fuel efficiency concurrent with improving the environment to enable air transportation growth. A figure shows NASA's subsonic transport system metrics. The results of Boeing ERA N+2 Advanced Vehicle Concept Study show that the Blended Wing Body (BWB) vehicle, with ultra high bypass propulsion systems have the potential to meet the combined NASA ERA N+2 goals. This study had 3 main activities. 1) The development of an advanced vehicle concepts that can meet the NASA system level metrics. 2) Identification of key enabling technologies and the development of technology roadmaps and maturation plans. 3) The development of a subscale test vehicle that can demonstrate and mature the key enabling technologies needed to meet the NASA system level metrics. Technology maturation plans are presented and include key performance parameters and technical performance measures. The plans describe the risks that will be reduced with technology development and the expected progression of technical maturity.

Hydrogen tube vehicle for supersonic transport: 2. Speed and energy

Energy Technology Data Exchange (ETDEWEB)

Miller, Arnold R. [Vehicle Projects Inc and Supersonic Tubevehicle LLC, 200 Violet St, Suite 100, Golden, CO 80401 (United States)

2010-06-15

The central concept of a new idea in high-speed transport is that operation of a vehicle in a hydrogen atmosphere, because of the low density of hydrogen, would increase sonic speed by a factor of 3.8 and decrease drag by 15 relative to air. A hydrogen atmosphere requires that the vehicle operate within a hydrogen-filled tube or pipeline, which serves as a phase separator. The supersonic tube vehicle (STV) can be supersonic with respect to air outside the tube while remaining subsonic inside. It breathes hydrogen fuel for its propulsion fuel cells from the tube itself. This paper, second in a series on the scientific foundations of the supersonic tube vehicle, tests the hypothesis that the STV will be simultaneously fast and energy efficient by comparing its predicted speed and energy consumption with that of four long-haul passenger transport modes: road, rail, maglev, and air. The study establishes the speed ranking STV >> airplane > maglev > train > coach (intercity bus) and the normalized energy consumption ranking Airplane >> coach > maglev > train > STV. Consistent with the hypothesis, the concept vehicle is both the fastest and lowest energy consuming mode. In theory, the vehicle can cruise at Mach 2.8 while consuming less than half the energy per passenger of a Boeing 747 at a cruise speed of Mach 0.81. (author)

Midwestern High-Level Radioactive Waste Transportation Project

International Nuclear Information System (INIS)

Dantoin, T.S.

1990-12-01

For more than half a century, the Council of State Governments has served as a common ground for the states of the nation. The Council is a nonprofit, state-supported and -directed service organization that provides research and resources, identifies trends, supplies answers and creates a network for legislative, executive and judicial branch representatives. This List of Available Resources was prepared with the support of the US Department of Energy, Cooperative Agreement No. DE-FC02-89CH10402. However, any opinions, findings, conclusions, or recommendations expressed herein are those of the author(s) and do not necessarily reflect the views of DOE. The purpose of the agreement, and reports issued pursuant to it, is to identify and analyze regional issues pertaining to the transportation of high-level radioactive waste and to inform Midwestern state officials with respect to technical issues and regulatory concerns related to waste transportation

BIM cost analysis of transport infrastructure projects

Science.gov (United States)

Volkov, Andrey; Chelyshkov, Pavel; Grossman, Y.; Khromenkova, A.

2017-10-01

The article describes the method of analysis of the energy costs of transport infrastructure objects using BIM software. The paper consideres several options of orientation of a building using SketchUp and IES VE software programs. These options allow to choose the best direction of the building facades. Particular attention is given to a distribution of a temperature field in a cross-section of the wall according to the calculation made in the ELCUT software. The issues related to calculation of solar radiation penetration into a building and selection of translucent structures are considered in the paper. The article presents data on building codes relating to the transport sector, on the basis of which the calculations were made. The author emphasizes that BIM-programs should be implemented and used in order to optimize a thermal behavior of a building and increase its energy efficiency using climatic data.

Natural gas purchasing for cogeneration projects

International Nuclear Information System (INIS)

Kubacki, J. Jr.

1992-01-01

This paper reports on the primary cost component for most gas-fired cogeneration or on-site power projects, cost of natural gas. Often gas comprises 50 to 65% of total project costs over the life of the project. Thus it is very important to focus on natural gas sourcing, pricing, transportation and storage. This important task should not be blindly delegated to a gas supplier. The end user must develop a gas strategy that results in the most cost-effective burnertip price. Long-term natural gas supplies are usually source from the three major producing regions: Mod-Continent, Gulf Coast, and Western Canada. A well-reasoned gas strategy must include: determination of transportation and distribution options from the project site to potential gas sources (including direct interconnection of the project to interstate pipelines); acquisition of competitive gas bids from suppliers in appropriate regions; negotiation of potential discounts from interstate pipelines and local distribution companies (LDCs); fine-tuning project economics by, for example, using storage to maximize transportation load factor; and pricing mechanisms that meet economic parameters of the project. This paper uses a hypothetical project in the Midwest to examine the major factors in devising a cost-effective natural gas sourcing

Modeling of pollutant emissions from road transport; Modelisation des emissions de polluants par le transport routier

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

COPERT III (computer programme to calculate emissions from road transport) is the third version of an MS Windows software programme aiming at the calculation of air pollutant emissions from road transport. COPERT estimates emissions of all regulated air pollutants (CO, NO{sub x}, VOC, PM) produced by different vehicle categories as well as CO{sub 2} emissions on the basis of fuel consumption. This research seminar was organized by the French agency of environment and energy mastery (Ademe) around the following topics: the uncertainties and sensitiveness analysis of the COPERT III model, the presentation of case studies that use COPERT III for the estimation of road transport emissions, and the future of the modeling of road transport emissions: from COPERT III to ARTEMIS (assessment and reliability of transport emission models and inventory systems). This document is a compilation of 8 contributions to this seminar and dealing with: the uncertainty and sensitiveness analysis of the COPERT III model; the road mode emissions of the ESCOMPTE program: sensitivity study; the sensitivity analysis of the spatialized traffic at the time-aggregation level: application in the framework of the INTERREG project (Alsace); the road transport aspect of the regional air quality plan of Bourgogne region: exhaustive consideration of the road network; intercomparison of tools and methods for the inventory of emissions of road transport origin; evolution of the French park of vehicles by 2025: new projections; application of COPERT III to the French context: a new version of IMPACT-ADEME; the European ARTEMIS project: new structural considerations for the modeling of road transport emissions. (J.S.)

Procedures for Dealing with Optimism Bias in Transport Planning

DEFF Research Database (Denmark)

Flyvbjerg, Bent; Glenting, Carsten; Rønnest, Arne Kvist

of the document are to provide empirically based optimism bias up-lifts for selected reference classes of transport infrastructure projects and provide guidance on using the established uplifts to produce more realistic forecasts for the individual project's capital expenditures. Furthermore, the underlying...... causes and institutional context for optimism bias in British transport projects are discussed and some possibilities for reducing optimism bias in project preparation and decision-making are identified....

High Temperature Smart Structures for Engine Noise Reduction and Performance Enhancement, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Noise mitigation for subsonic transports is a continuing high priority, and recent work has identified successful exhaust mixing enhancement devices (chevrons) that...

High Temperature Smart Structures for Engine Noise Reduction and Performance Enhancement, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Noise mitigation for subsonic transports is a continuing high priority, and recent work has identified successful exhaust mixing enhancement devices that have...

Modeling Jet Interaction of a Round Jet with a Subsonic Carrying Flow

Directory of Open Access Journals (Sweden)

Yu. P. Korobkova

2017-01-01

Full Text Available The paper analyzes numerical simulation of the round jet with a subsonic carrying flow. Performs calculations for different tilt angles of the jet ωj blowing and constructs the fields of velocities and pressures of the flow, jet trajectory, as well as calculates the pressure coefficients on the plate surface.To solve this problem, the CAD Solidworks Flow Simulation software was used. This package contains the solution of the Nowier-Stokes equation, which is necessary for modeling this problem.To test operation capability of the closing condition (k-th model of turbulence and proper choice of the boundaries of the computational domain, was solved a test problem forThe solution analysis has shown that the k-th model of turbulence was capable, and has a good agreement with other authors' experiment results [4]. Based on the selected conditions, further calculations were carried out for different tilt angles of jet blowing.In the course of research activities, it was revealed that the tilt angle of the jet blowing has a strong impact on redistribution of velocity and pressure in the area of the jet interaction, which allows the efficient use of such jets to control aerodynamic characteristics of the aircraft with the same power consumption for blowing out the gas. The solution of this problem is very relevant in wide application in aviation and rocket and space technology.

Bifurcations and chaos of the nonlinear viscoelastic plates subjected to subsonic flow and external loads

International Nuclear Information System (INIS)

An, Fengxian; Chen, Fangqi

2016-01-01

Highlights: • The subharmonic bifurcations and chaotic motions are studied by means of Melnikov method. • The critical conditions for the occurrence of chaotic motions and subharmonic bifurcations are obtained. • The chaotic features on the system parameters are discussed. • The theoretical predictions are confirmed by numerical simulations. - Abstract: The subharmonic bifurcations and chaotic motions of the nonlinear viscoelastic plates subjected to subsonic flow and external loads are studied by means of Melnikov method. The critical conditions for the occurrence of chaotic motions are obtained. The chaotic features on the system parameters are discussed in detail. The conditions for subharmonic bifurcations are also obtained. For the system with no structural damping, chaotic motions can occur through infinite subharmonic bifurcations of odd orders. Furthermore, we confirm our theoretical predictions by numerical simulations. The theoretical results obtained here can help us to eliminate or suppress large nonlinear vibrations and chaotic motions of the nonlinear viscoelastic plates. Based on Melnikov method, complex dynamical behaviors of the nonlinear viscoelastic plates can be controlled by modifying the system parameters.

On the structure, interaction, and breakdown characteristics of slender wing vortices at subsonic, transonic, and supersonic speeds

Science.gov (United States)

Erickson, Gary E.; Schreiner, John A.; Rogers, Lawrence W.

1989-01-01

Slender wing vortex flows at subsonic, transonic, and supersonic speeds were investigated in a 6 x 6 ft wind tunnel. Test data obtained include off-body and surface flow visualizations, wing upper surface static pressure distributions, and six-component forces and moments. The results reveal the transition from the low-speed classical vortex regime to the transonic regime, beginning at a freestream Mach number of 0.60, where vortices coexist with shock waves. It is shown that the onset of core breakdown and the progression of core breakdown with the angle of attack were sensitive to the Mach number, and that the shock effects at transonic speeds were reduced by the interaction of the wing and the lead-edge extension (LEX) vortices. The vortex strengths and direct interaction of the wing and LEX cores (cores wrapping around each other) were found to diminish at transonic and supersonic speeds.

Emissions of road transport

International Nuclear Information System (INIS)

Maekelae, K.; Tuominen, A.

2001-01-01

Information on the emissions and energy consumption of different vehicles per transported amount of goods has up to last years been minimal. The unit emissions mean the amount of harmful compounds in the flue gases of a vehicle per service, time or energy unit. National three-year MOBILE 2-research program, started in 1999, determines the unit emissions of all the traffic sectors in Finland. VTT Building and Transport mainly carry out the research, but the Institute of Transportation Engineering of the Tampere University of Technology (TTKK) is responsible for a part of the research. The objective of the project is to create common rules for the determination of unit emissions values, and to determine the best possible values for Finnish conditions. Unit emission data is mainly needed for evaluation of the environmental impacts of production plants and other activities containing transportation of commodities. At the web sites of VTT Building and Transport there are about 60 pages of text and tables (about 4000 values) on unit emissions. The URL of the pages is http://www.vtt.fi/rte/projects/lipastoe/index.htm. These web pages present data on all the transportation sectors (road, railroad, water and air transportation), most of the materials concerning road transportation. Following compounds and values are included: CO, HC, NO x , particulates, SO 2 , CO 2 and energy consumption. Methane and nitrous oxide emissions values have also been presented

Subsonic Ultra Green Aircraft Research: Phase 2. Volume 2; Hybrid Electric Design Exploration

Science.gov (United States)

Bradley, Marty K.; Droney, Christopher K.

2015-01-01

This report summarizes the hybrid electric concept design, analysis, and modeling work accomplished by the Boeing Subsonic Ultra Green Aircraft Research (SUGAR) team, consisting of Boeing Research and Technology, Boeing Commercial Airplanes, General Electric, and Georgia Tech.Performance and sizing tasks were conducted for hybrid electric versions of a conventional tube-and-wing aircraft and a hybrid wing body. The high wing Truss Braced Wing (TBW) SUGAR Volt was updated based on results from the TBW work (documented separately) and new engine performance models. Energy cost and acoustic analyses were conducted and technology roadmaps were updated for hybrid electric and battery technology. NOx emissions were calculated for landing and takeoff (LTO) and cruise. NPSS models were developed for hybrid electric components and tested using an integrated analysis of superconducting and non-superconducting hybrid electric engines. The hybrid electric SUGAR Volt was shown to produce significant emissions and fuel burn reductions beyond those achieved by the conventionally powered SUGAR High and was able to meet the NASA goals for fuel burn. Total energy utilization was not decreased but reduced energy cost can be achieved for some scenarios. The team was not able to identify a technology development path to meet NASA's noise goals

Environmental Development Plan for Transportation Energy Conservation. FY 79 update

Energy Technology Data Exchange (ETDEWEB)

Singh, M. K.; Bernard, III, M. J.

1978-12-15

This is the first annual update of the Environment Development Plan (EDP) for the DOE Division of Transportation Energy Conservation program. It identifies the ecosystem, resource, physical environment, health, safety, and socioeconomic concerns associated with the division's transportation programs. These programs include the research, development, demonstration and assessment (RDD and A) of seventeen transportation technologies and several strategy and policy development and implementation projects. The transportation technologies projects deal with highway transport including electric vehicles, marine transport and pipeline transport. This EDP presents a research and assessment plan for resolving any potentially adverse environmental concerns stemming from these programs.

Analysis of in-flight boundary-layer state measurements on a subsonic transport wing in high-lift configuration

Science.gov (United States)

vanDam, C. P.; Los, S. M.; Miley, S. J.; Yip, L. P.; Banks, D. W.; Roback, V. E.; Bertelrud, A.

1995-01-01

Flight experiments on NASA Langley's B737-100 (TSRV) airplane have been conducted to document flow characteristics in order to further the understanding of high-lift flow physics, and to correlate and validate computational predictions and wind-tunnel measurements. The project is a cooperative effort involving NASA, industry, and universities. In addition to focusing on in-flight measurements, the project includes extensive application of various computational techniques, and correlation of flight data with computational results and wind-tunnel measurements. Results obtained in the most recent phase of flight experiments are analyzed and presented in this paper. In-flight measurements include surface pressure distributions, measured using flush pressure taps and pressure belts on the slats, main element, and flap elements; surface shear stresses, measured using Preston tubes; off-surface velocity distributions, measured using shear-layer rakes; aeroelastic deformations of the flap elements, measured using an optical positioning system; and boundary-layer transition phenomena, measured using hot-film anemometers and an infrared imaging system. The analysis in this paper primarily focuses on changes in the boundary-layer state that occurred on the slats, main element, and fore flap as a result of changes in flap setting and/or flight condition. Following a detailed description of the experiment, the boundary-layer state phenomenon will be discussed based on data measured during these recent flight experiments.

The Risks of Investments in Transport Infrastructure Projects

Directory of Open Access Journals (Sweden)

O. Pokorná

2002-01-01

Full Text Available Investment decisions should not be taken without an in-depth analysis of the risks. This is an important stage in project preparation and should be performed simultaneously with the planning of the financial operations. Infrastructure development requires that project risks and responsibilities be assigned to the public or private entity that is best able to manage them. The risks and their financial impacts are usually not quantified equally by all parties. Each party views the given risks according to the guarantees provided. These guarantees are related to the form of participation in the project.

Efficient and effective implementation of alternative project delivery methods.

Science.gov (United States)

2017-05-01

Over the past decade, the Maryland Department of Transportation State Highway : Administration (MDOT SHA) has implemented Alternative Project Delivery (APD) methods : in a number of transportation projects. While these innovative practices have produ...

Great Basin paleoenvironmental studies project

International Nuclear Information System (INIS)

1993-01-01

Project goals, project tasks, progress on tasks, and problems encountered are described and discussed for each of the studies that make up the Great Basin Paleoenvironmental Studies Project for Yucca Mountain. These studies are: Paleobotany, Paleofauna, Geomorphology, and Transportation. Budget summaries are also given for each of the studies and for the overall project

Automated Transportation Management System (ATMS) Software Project Management Plan (SPMP). Revision 2

International Nuclear Information System (INIS)

Weidert, R.S.

1995-01-01

As a cabinet level federal agency with a diverse range of missions and an infrastructure spanning the United States, the US Department of Energy (DOE) has extensive freight transportation requirements. Performance and management of this freight activity is a critical function. DOE's Transportation Management Division (TMD) has an agency-wide responsibility for overseeing transportation activities. Actual transportation operations are handled by government or contractor staff at the field locations. These staff have evolved a diverse range of techniques and procedures for performing transportation functions. In addition to minimizing the economic impact of transportation on programs, facility transportation staff must be concerned with the increasingly complex task of complying with complex shipment safety regulations. Maintaining the department's safety record for shipping hazardous and radioactive materials is a primary goal. Use of automation to aid transportation functions is not widespread within DOE, though TMD has a number of software systems designed to gather and analyze data pertaining to field transportation activities. These systems are not integrated. Historically, most field facilities have accomplished transportation-related tasks manually or with minimal computer assistance. At best, information and decision support systems available to transportation staffs within the facilities are fragmented. In deciding where to allocate resources for automation, facility managers have not tended to give the needs of transportation departments a high priority. This diversity causes TMD significant difficulty in collecting data for use in managing department-wide transportation activities

Automated Transportation Management System (ATMS) Software Project Management Plan (SPMP). Revision 2

Energy Technology Data Exchange (ETDEWEB)

Weidert, R.S.

1995-05-26

As a cabinet level federal agency with a diverse range of missions and an infrastructure spanning the United States, the US Department of Energy (DOE) has extensive freight transportation requirements. Performance and management of this freight activity is a critical function. DOE`s Transportation Management Division (TMD) has an agency-wide responsibility for overseeing transportation activities. Actual transportation operations are handled by government or contractor staff at the field locations. These staff have evolved a diverse range of techniques and procedures for performing transportation functions. In addition to minimizing the economic impact of transportation on programs, facility transportation staff must be concerned with the increasingly complex task of complying with complex shipment safety regulations. Maintaining the department`s safety record for shipping hazardous and radioactive materials is a primary goal. Use of automation to aid transportation functions is not widespread within DOE, though TMD has a number of software systems designed to gather and analyze data pertaining to field transportation activities. These systems are not integrated. Historically, most field facilities have accomplished transportation-related tasks manually or with minimal computer assistance. At best, information and decision support systems available to transportation staffs within the facilities are fragmented. In deciding where to allocate resources for automation, facility managers have not tended to give the needs of transportation departments a high priority. This diversity causes TMD significant difficulty in collecting data for use in managing department-wide transportation activities.

Law project aiming to enforce the maritime transport safety and fight against the sea pollutions; Proposition de loi tendant a renforcer la securite du transport maritime et a lutter contre les pollutions marines

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-12-01

Facing the increase of the maritime transport, the poor quality of the ships and the flag of convenience problem, this law project is proposed. It concerns the ships maintenance and safety standards, the delivery of a control certificate, the social rights of the sailors, the coasts and ports access control. (A.L.B.)

CNG transport opportunities

International Nuclear Information System (INIS)

Anon

2000-01-01

The recent announcement by the Australian Government of funding for a dramatic increase in supply infrastructure for Compressed Natural Gas (CNG) powered vehicles has shored up predictions that natural gas will achieve a thirty-fold increase in its share of the Australian transport energy market by 2015. This projection, would put sales of natural gas for transport fuel in the year 2014/15 at about 10% of current retail sales across the nation. In the general transport sector, the lower particulate and noise pollution, compared with diesel-powered vehicles, is a significant advantage

COLLOID-FACILITATED TRANSPORT OF RADIONUCLIDES THROUGH THE VADOSE ZONE

International Nuclear Information System (INIS)

Flury, Markus

2003-01-01

Contaminants have leaked into the vadose zone at the USDOE Hanford reservation. It is important to understand the fate and transport of these contaminants to design remediation strategies and long-term waste management plans at the Hanford reservation. Colloids may play an important role in fate and transport of strongly sorbing contaminants, such as Cs or Pu. This project seeks to improve the basic understanding of colloid and colloid-facilitated transport of contaminants in the vadose zone. The specific objectives addressed are: (1) Determine the structure, composition, and surface charge characteristics of colloidal particles formed under conditions similar to those occurring during leakage of waste typical of Hanford tank supernatants into soils and sediments surrounding the tanks. (2) Characterize the mutual interactions between colloids, contaminant, and soil matrix in batch experiments under various ionic strength and pH conditions. We will investigate the nature of the solid-liquid interactions and the kinetics of the reactions. (3) Evaluate mobility of colloids through soil under different degrees of water saturation and solution chemistry (ionic strength and pH). (4) Determine the potential of colloids to act as carriers to transport the contaminant through the vadose zone and verify the results through comparison with field samples collected under leaking tanks. (5) Improve conceptual characterization of colloid-contaminant-soil interactions and colloid-facilitated transport for implementation into reactive chemical transport models. This project was in part supported by an NSF-IGERT grant to Washington State University. The IGERT grant provided funding for graduate student research and education, and two graduate students were involved in the EMSP project. The IGERT program also supported undergraduate internships. The project is part of a larger EMSP program to study fate and transport of contaminants under leaking Hanford waste tanks. The project has

Tomorrow's Transportation Market : Developing an Innovative, Seamless Transportation System

Science.gov (United States)

2013-04-17

With the cost of congestion in the United States estimated to be in the order of $121 billion, transportation planners are under increasing pressure to improve conditions and meet projected demand increases. Harnessing emerging technologies to develo...

The International Intraval project: to study validation of geosphere transport models for performance assessment of nuclear waste disposal. Phase 1, summary report

International Nuclear Information System (INIS)

1993-12-01

Intraval is an international project that addresses the validation of models of transport of radionuclides through groundwater in the geosphere. Such models are used in assessment of the long-term safety of nuclear waste disposal systems. The present report summarises the results for the test cases and presents some additional remarks

Transport of Perfluorocarbon Tracers in the Cranfield Geological Carbon Sequestration Project

Science.gov (United States)

Moortgat, J.; Soltanian, M. R.; Amooie, M. A.; Cole, D. R.; Graham, D. E.; Pfiffner, S. M.; Phelps, T.

2017-12-01

A field-scale carbon dioxide (CO2) injection pilot project was conducted by the Southeast Regional Sequestration Partnership (SECARB) at Cranfield, Mississippi. Two associated campaigns in 2009 and 2010 were carried out to co-inject perfluorocarbon tracers (PFTs) and sulfur hexafluoride (SF6) with CO2. Tracers in gas samples from two observation wells were analyzed to construct breakthrough curves. We present the compiled field data as well as detailed numerical modeling of the flow and transport of CO2, brine, and introduced tracers. A high-resolution static model of the formation geology in the Detailed Area Study (DAS) was used in order to capture the impact of connected flow pathways created by fluvial channels on breakthrough curves and breakthrough times of PFTs and SF6 tracers. We use the cubic-plus-association (CPA) equation of state, which takes into account the polar nature of water molecules, to describe the phase behavior of CO2-brine-tracer mixtures. We show how the combination of multiple tracer injection pulses with detailed numerical simulations provide a powerful tool in constraining both formation properties and how complex flow pathways develop over time.

Final Project Report: Release of aged contaminants from weathered sediments: Effects of sorbate speciation on scaling of reactive transport

Energy Technology Data Exchange (ETDEWEB)

Jon Chorover, University of Arizona; Peggy O' €™Day, University of California, Merced; Karl Mueller, Penn State University; Wooyong Um, Pacific Northwest National Laboratory; Carl Steefel, Lawrence Berkeley National Laboratory

2012-10-01

Hanford sediments impacted by hyperalkaline high level radioactive waste have undergone incongruent silicate mineral weathering concurrent with contaminant uptake. In this project, we studied the impact of background pore water (BPW) on strontium, cesium and iodine desorption and transport in Hanford sediments that were experimentally weathered by contact with simulated hyperalkaline tank waste leachate (STWL) solutions. Using those lab-weathered Hanford sediments (HS) and model precipitates formed during nucleation from homogeneous STWL solutions (HN), we (i) provided detailed characterization of reaction products over a matrix of field-relevant gradients in contaminant concentration, PCO2, and reaction time; (ii) improved molecular-scale understanding of how sorbate speciation controls contaminant desorption from weathered sediments upon removal of caustic sources; and (iii) developed a mechanistic, predictive model of meso- to field-scale contaminant reactive transport under these conditions.

23 CFR 810.102 - Eligible projects.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Eligible projects. 810.102 Section 810.102 Highways... SPECIAL USE HIGHWAY PROJECTS Highway Public Transportation Projects and Special Use Highway Facilities § 810.102 Eligible projects. Under this subpart the Federal Highway Administrator may approve on any...

Optimization of existing transport services – case study of the Niko Transport d.o.o. Company

Directory of Open Access Journals (Sweden)

Igor TRUPAC

2011-01-01

Full Text Available The operational efficiency of the transport-logistics chains is affected by all actors involved: linear companies, port authorities, stevedores, forwarders, agents as well as of the level of integration of terminals and hinterland transportation modes. At the moment, only the company Niko Transport d.o.o. offers the intermodal way of transport in Slovenia. As for any other transportation problem, time window constraints and the availability of alternative routings of intermodal transport poses additional challenges.The new strategy of the company was named »We select green«. Its main goal is the same effect with lower pollution. They understand they are part of whole logistic chains for which it is typical to become more and more sensible to the demands that concerns the protection of the environment. That is also one of the priority strategies of the EU. Launched in the Freight Transport Logistics Action Plan, Green Corridors support today the EU's agenda towards decarbonising transport while emphasising the need for efficient logistics. The goal of the article is to present the business of the Niko Transport d.o.o. company on the UK market, the introduction of the multimodal transport, the approval of the Marco Polo project, the selection of courses and partners. A research of the students of the Caledonian University of Glasgow as a part of the project is also presented in the article.

FREIGHTVISION. Sustainable European freight transport 2050. Forecast, vision and policy recommendation

Energy Technology Data Exchange (ETDEWEB)

Helmreich, Stephan [AustriaTech Federal Agency for Technological Measurements Ltd., Wien (Austria). Future of Transport; Keller, Hartmut (eds.) [TransVer GmbH-Transport Research and Consultancy, Muenchen (Germany)

2011-07-01

This book has been written on the basis of the research done between 2008 and 2010 as part of the European Commission funded FREIGHTVISION project. The ''FREIGHTVISION - Freight Transport 2050 Foresight'' project was funded by the Directorate General MOVE to design a long term vision for European freight transport in 2050 and to identify actions and research to progress appropriate freight transport measures in Europe. The project was carried out as a foresight process encompassing four conferences in which the project team identified and developed with the aid of more than 100 experts an action plan for securing long term freight transport in Europe. The book provides insights into the freight transport visions and Backcasts identified for 2035 and 2050, issues which need to be addressed and measures which were assessed to be part of future paths to assure an economical, environmental, and social freight transport system. (orig.)

Final report of the TRUE Block Scale project. 4. Synthesis of flow, transport and retention in the block scale

International Nuclear Information System (INIS)

Winberg, Anders; Andersson, Peter; Byegaard, Johan

2003-03-01

The TRUE Block Scale project was performed at the Aespoe Hard Rock laboratory as an international partnership funded by ANDRA, ENRESA, JNC, Nirex, Posiva and SKB. The project, initiated mid 1996, was divided in a series of defined stages; Scoping Stage, Preliminary Characterisation Stage, Detailed Characterisation Stage, Tracer Test Stage and the Evaluation and Reporting Stage. The specific objectives were to: 1) increase understanding of tracer transport in a fracture network and improve predictive capabilities, 2) assess the importance of tracer retention mechanisms (diffusion and sorption) in a fracture network, and 3) assess the link between flow and transport data as a means for predicting transport phenomena. Characterisation in included drilling, core logging, borehole imaging, borehole radar, 3D seismic surveys, hydraulic tests (flow logging, single hole tests, cross-hole interference tests), tracer dilution tests, hydrogeochemical analyses of groundwater samples and various types of mineralogical, geochemical and petrophysical measurements on drill core samples. Drilling and characterisation of each new borehole was followed by analysis and decision with regards to need and geometry of a subsequent borehole. The main set of tools for determining the conductive geometry and the hydro-structural model was a combination of borehole television (BIPS), high resolution flow logging and pressure responses from drilling and cross-hole interference tests. The constructed hydro-structural model was made up of a set of deterministic sub-vertical structures mainly oriented northwest. Hydraulic features not part of the deterministic set were included in a stochastic background fracture population. Material properties and boundary conditions were also assigned to the developed model. Characteristics and properties measured in the laboratory were integrated in generalised microstructural models. Hypotheses formulated in relation to defined basic questions were addressed

Final report of the TRUE Block Scale project. 4. Synthesis of flow, transport and retention in the block scale

Energy Technology Data Exchange (ETDEWEB)

Winberg, Anders [Conterra AB (Sweden); Andersson, Peter; Byegaard, Johan [Geosigma AB (Sweden)] [and others

2003-03-01

The TRUE Block Scale project was performed at the Aespoe Hard Rock laboratory as an international partnership funded by ANDRA, ENRESA, JNC, Nirex, Posiva and SKB. The project, initiated mid 1996, was divided in a series of defined stages; Scoping Stage, Preliminary Characterisation Stage, Detailed Characterisation Stage, Tracer Test Stage and the Evaluation and Reporting Stage. The specific objectives were to: 1) increase understanding of tracer transport in a fracture network and improve predictive capabilities, 2) assess the importance of tracer retention mechanisms (diffusion and sorption) in a fracture network, and 3) assess the link between flow and transport data as a means for predicting transport phenomena. Characterisation in included drilling, core logging, borehole imaging, borehole radar, 3D seismic surveys, hydraulic tests (flow logging, single hole tests, cross-hole interference tests), tracer dilution tests, hydrogeochemical analyses of groundwater samples and various types of mineralogical, geochemical and petrophysical measurements on drill core samples. Drilling and characterisation of each new borehole was followed by analysis and decision with regards to need and geometry of a subsequent borehole. The main set of tools for determining the conductive geometry and the hydro-structural model was a combination of borehole television (BIPS), high resolution flow logging and pressure responses from drilling and cross-hole interference tests. The constructed hydro-structural model was made up of a set of deterministic sub-vertical structures mainly oriented northwest. Hydraulic features not part of the deterministic set were included in a stochastic background fracture population. Material properties and boundary conditions were also assigned to the developed model. Characteristics and properties measured in the laboratory were integrated in generalised microstructural models. Hypotheses formulated in relation to defined basic questions were addressed

Characterisation of subsonic axisymmetric nozzles

Czech Academy of Sciences Publication Activity Database

Tesař, Václav

2008-01-01

Roč. 86, č. 11 (2008), s. 1253-1262 ISSN 0263-8762 R&D Projects: GA AV ČR IAA200760705 Institutional research plan: CEZ:AV0Z20760514 Keywords : nozzle * characterisation * nozzle properties * nozzle invariants Subject RIV: BK - Fluid Dynamics Impact factor: 0.989, year: 2008

DIRECTIONS, CONDITIONS, AND RISKS OF IMPLEMENTATION OF THE TRANSPORT MEGA-PROJECTS “NORTH-SOUTH” AND “EAST-WEST” UNDER THE NEW GEOPOLITICAL REALITIES

Directory of Open Access Journals (Sweden)

A. K. Tulokhonov

2017-01-01

Full Text Available The paper discusses the prospect of the development of Russia’s transport infrastructure mega-projects in the context of the Eurasian Economic Union and the Shanghai Cooperation Organization formation. The paper focuses on the country’s interests in the area of influence of the Silk and the Tea Roads. Economic cooperation with the countries of the Asia-Pacific region on the Trans-Siberian Railway-Mongolia-China direction, with diversification of transport routes to all four oceans and five continents, is the most effective policy for Russia.

Analysis and design of insulation systems for LH2-fueled aircraft

Science.gov (United States)

Cunnington, G. R., Jr.

1979-01-01

An analytical program was conducted to evaluate the performance of 15 potential insulations for the fuel tanks of a subsonic LH2-fueled transport aircraft intended for airline service in the 1990-1995 time period. As a result, two candidate insulation systems are proposed for subsonic transport aircraft applications. Both candidates are judged to be the optimum available and should meet the design requirements. However, because of the long-life cyclic nature of the application and the cost sensitivity of airline operations, an experimental tank/insulation development or proof-of-concept program is recommended. This program should be carried out with a nearly full-scale system which would be subjected to the cyclic thermal and mechanical inputs anticipated in aircraft service.

Telematics for hazardous goods transportation; Anwendungen fuer den Transport von kritischen Guetern

Energy Technology Data Exchange (ETDEWEB)

Stingl, D [Danzas Logistics GmbH, Hamburg (Germany)

1999-07-01

In the course of the integration of the customer Langnese Iglo in autumn 1997 and in view of the already existing general conditions for the implementation of the equlations of the directive on food hygiene (HACCP-concept) as well as the permanently in reasing demand for quality of logistics DANZAS Logistics GmbH, cooperating closely with in deep-frozen goods customer Langnese-Iglo decided to develop a new system of quality assurance for the transportation of deep-frozen goods and apply this system to all its activities. First ideas about standard demands, technical solutions and multi-functional design showed that the project had to be handled in such a flexible way that temperature controlling (for the transportation of deep-frozen goods, temperature-controlled DANZAS-warehouses and all future temperature-controlled transportation) and the monitoring of security-relevant transportation can be integrated in one and the same project. (orig.) [German] Im Zuge der Integration des Kunden Langnese Iglo im Herbst 1997 und unter Beruecksichtigung der bereits vorliegenden Rahmenbedingungen zur Umsetzung der Bestimmungen der Lebensmittelhygieneverordnung (HACCP-Konzept) sowie des staendig wachsenden Qualitaetsanspruches an logistische Dienstleistungen, hat sich die DANZAS Logistics GmbH in enger Zusammenarbeit mit dem TK-Kunden Langnese Iglo entschlossen, ein innovatives System zur Qualitaetssicherung im Tiefkuehltransport zu erarbeiten und flaechendeckend einzusetzen. Die ersten Gedanken bezueglich Standardanforderungen, technischer Loesungsansaetze und multifunktionaler Ausrichtung zeigten, dass dieses Projekt so variabel zu gestalten ist, dass sowohl Temperaturcontrolling (fuer TK-Transporte, fuer die temperaturgefuehrten DANZAS-Laeger und zukuenftig alle temperaturgefuehrten Transporte) als auch die Ueberwachung sicherheitsrelevanter Transporte zu integrieren sind. (orig.)

18 CFR 157.37 - Project design.

Science.gov (United States)

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Project design. 157.37... Seasons for Alaska Natural Gas Transportation Projects § 157.37 Project design. In reviewing any... proposed project has been designed to accommodate the needs of shippers who have made conforming bids...

Worldwide spent fuel transportation logistics

International Nuclear Information System (INIS)

Best, R.E.; Garrison, R.F.

1978-01-01

This paper presents an overview of the worldwide transportation requirements for spent fuel. Included are estimates of numbers and types of shipments by mode and cask type for 1985 and the year 2000. In addition, projected capital and transportation costs are presented. For the year 1977 and prior years inclusive, there is a cumulative worldwide requirement for approximately 300 MTU of spent fuel storage at away-from-reactor (AFR) facilities. The cumulative requirements for years through 1985 are projected to be nearly 10,000 MTU, and for the years through 2000 the requirements are conservatively expected to exceed 60,000 MTU. These AFR requirements may be related directly to spent fuel transportation requirements. In total nearly 77,000 total cask shipments of spent fuel will be required between 1977 and 2000. These shipments will include truck, rail, and intermodal moves with many ocean and coastal water shipments. A limited number of shipments by air may also occur. The US fraction of these is expected to include 39,000 truck shipments and 14,000 rail shipments. European shipments to regional facilities are expected to be primarily by rail or water mode and are projected to account for 16,000 moves. Pacific basin shipments will account for 4500 moves. The remaining are from other regions. Over 400 casks will be needed to meet the transportation demands. Capital investment is expected to reach $800,000,000 in 1977 dollars. Cumulative transport costs will be a staggering $4.4 billion dollars

Cooperative Transport Planning

NARCIS (Netherlands)

Zutt, J.; De Weerdt, M.M.

2000-01-01

To test and compare different forms of cooperative planning algorithms developed in the CABS project we use a generic simulator called MARS. Examples in the transportation sector are implemented in this simulator.

Physical Activity through Sustainable Transport Approaches (PASTA): a study protocol for a multicentre project.

Science.gov (United States)

Gerike, Regine; de Nazelle, Audrey; Nieuwenhuijsen, Mark; Panis, Luc Int; Anaya, Esther; Avila-Palencia, Ione; Boschetti, Florinda; Brand, Christian; Cole-Hunter, Tom; Dons, Evi; Eriksson, Ulf; Gaupp-Berghausen, Mailin; Kahlmeier, Sonja; Laeremans, Michelle; Mueller, Natalie; Orjuela, Juan Pablo; Racioppi, Francesca; Raser, Elisabeth; Rojas-Rueda, David; Schweizer, Christian; Standaert, Arnout; Uhlmann, Tina; Wegener, Sandra; Götschi, Thomas

2016-01-07

Only one-third of the European population meets the minimum recommended levels of physical activity (PA). Physical inactivity is a major risk factor for non-communicable diseases. Walking and cycling for transport (active mobility, AM) are well suited to provide regular PA. The European research project Physical Activity through Sustainable Transport Approaches (PASTA) pursues the following aims: (1) to investigate correlates and interrelations of AM, PA, air pollution and crash risk; (2) to evaluate the effectiveness of selected interventions to promote AM; (3) to improve health impact assessment (HIA) of AM; (4) to foster the exchange between the disciplines of public health and transport planning, and between research and practice. PASTA pursues a mixed-method and multilevel approach that is consistently applied in seven case study cities. Determinants of AM and the evaluation of measures to increase AM are investigated through a large scale longitudinal survey, with overall 14,000 respondents participating in Antwerp, Barcelona, London, Örebro, Rome, Vienna and Zurich. Contextual factors are systematically gathered in each city. PASTA generates empirical findings to improve HIA for AM, for example, with estimates of crash risks, factors on AM-PA substitution and carbon emissions savings from mode shifts. Findings from PASTA will inform WHO's online Health Economic Assessment Tool on the health benefits from cycling and/or walking. The study's wide scope, the combination of qualitative and quantitative methods and health and transport methods, the innovative survey design, the general and city-specific analyses, and the transdisciplinary composition of the consortium and the wider network of partners promise highly relevant insights for research and practice. Ethics approval has been obtained by the local ethics committees in the countries where the work is being conducted, and sent to the European Commission before the start of the survey. The PASTA website

Second annual Transportation Infrastructure Engineering Conference.

Science.gov (United States)

2013-10-01

The conference will highlight a few of the current projects that have been sponsored by the Center for Transportation : Infrastructure and Safety (CTIS), a national University Transportation Center at S&T. In operation since 1998, the CTIS supports :...

Consideration of climate effects in transportation system planning; Ilmastovaikutusten huomioon ottaminen liikennejaerjestelmaesuunnittelussa

Energy Technology Data Exchange (ETDEWEB)

Touru, T.

2011-07-01

Climate change is recognized as the biggest environmental threat of our time. Carbon dioxide emissions that contribute to the phenomenon are constantly rising in transport sector. Private cars cause most of the emissions. National and international politics strategies and targets for reducing greenhouse gases have been drawn up. Transport sector is one of the focused sectors. The transportation system plans are regional plans, used for implementing the strategies. The most important way in consideration of the climate effects in planning is an attempt to reduce private car use. This paper examines the Finnish transportation system planning, what means are used to affect the means of transport and hence emissions. The analysis examines how the methods have been implemented in Finnish plans. The study seeks to establish targets for development towards sustainable transportation systems. The literature study pointed out that there is a need to develop transportation system regulations in Finland. Plans are often copied from other projects, and only aimed to agree about the projects. Objectives set in the plans guide the selection of the projects poorly. Sustainable development of transportation system is based on reducing car-based traffic by development of pedestrian and bicycle traffic and public transport. Transportation system planning has traditionally focused on improving road network with big projects. Thus smaller projects have often been neglected. Public transport and pedestrian and bicycle traffic have been prioritized in strategic level since the first transportation plans from the 1990s. Often the strategic-level prioritization has not materialized in projects. Although the desires of the traffic development haven't come true, new means of prioritizing sustainable forms of traffic haven't appeared. Mobility management has been really introduced in the very latest plans. Also the consideration of climate effects has developed very recently

Survey of projected growth and problems facing air transportation, 1975 - 1985

Science.gov (United States)

Williams, L. J.; Wilson, A.

1975-01-01

Results are presented of a survey conducted to determine the current opinion of people working in air transportation demand forecasting on the future of air transportation over the next ten years. In particular, the survey included questions on future demand growth, load factor, fuel prices, introduction date for the next new aircraft, the priorities of problems facing air transportation, and the probability of a substantial change in air transportation regulation. The survey participants included: airlines, manufacturers, universities, government agencies, and other organizations (financial institutions, private research companies, etc.). The results are shown for the average responses within the organization represented as well as the overall averages.

Planning and evaluation of sustainability in transport

DEFF Research Database (Denmark)

Introduction and general approaches 2. Brief overview ofsome projects related to sustainability 3. Examples from research – Decision analysis and support – Policy Influence of indic ators – National Sustainable Transport Planning 4. Some perspectives......Introduction and general approaches 2. Brief overview ofsome projects related to sustainability 3. Examples from research – Decision analysis and support – Policy Influence of indic ators – National Sustainable Transport Planning 4. Some perspectives...

Climate impact of supersonic air traffic: an approach to optimize a potential future supersonic fleet ─ results from the EU-project SCENIC

Directory of Open Access Journals (Sweden)

I.S.A. Isaksen

2007-10-01

Full Text Available The demand for intercontinental transportation is increasing and people are requesting short travel times, which supersonic air transportation would enable. However, besides noise and sonic boom issues, which we are not referring to in this investigation, emissions from supersonic aircraft are known to alter the atmospheric composition, in particular the ozone layer, and hence affect climate significantly more than subsonic aircraft. Here, we suggest a metric to quantitatively assess different options for supersonic transport with regard to the potential destruction of the ozone layer and climate impacts. Options for fleet size, engine technology (nitrogen oxide emission level, cruising speed, range, and cruising altitude, are analyzed, based on SCENIC emission scenarios for 2050, which underlay the requirements to be as realistic as possible in terms of e.g., economic markets and profitable market penetration. This methodology is based on a number of atmosphere-chemistry and climate models to reduce model dependencies. The model results differ significantly in terms of the response to a replacement of subsonic aircraft by supersonic aircraft, e.g., concerning the ozone impact. However, model differences are smaller when comparing the different options for a supersonic fleet. Those uncertainties were taken into account to make sure that our findings are robust. The base case scenario, where supersonic aircraft get in service in 2015, a first fleet fully operational in 2025 and a second in 2050, leads in our simulations to a near surface temperature increase in 2050 of around 7 mK and with constant emissions afterwards to around 21 mK in 2100. The related total radiative forcing amounts to 22 mWm2 in 2050, with an uncertainty between 9 and 29 mWm2. A reduced supersonic cruise altitude or speed (from Mach 2 to Mach 1.6 reduces both, climate impact and ozone destruction, by around 40%. An increase in the range of the supersonic aircraft leads to

Photon Doppler Velocimeter to Measure Entrained Additive Manufactured Bulk Metal Powders in Hot Subsonic and Supersonic Oxygen Gas

Science.gov (United States)

Tylka, Jonathan

2016-01-01

Parts produced by additive manufacturing, particularly selective laser melting (SLM), have been shown to silt metal particulate even after undergoing stringent precision aerospace cleaning processes (Lowrey 2016). As printed parts are used in oxygen systems with increased pressures, temperatures, and gas velocity, the risk of ignition by particle impact, the most common direct ignition source of metals in oxygen, substantially increases. The White Sands Test Facility (WSTF), in collaboration with Marshall Space Flight Center (MSFC), desires to test the ignitability of SLM metals by particle impact in heated oxygen. The existing test systems rely on gas velocity calculations to infer particle velocity in both subsonic and supersonic particle impact systems. Until now, it was not possible to directly measure particle velocity. To increase the fidelity of planned SLM ignition studies, it is necessary to validate that the Photon Doppler Velocimetry(PDV) test system can accurately measure particle velocity.

Cost-Benefit Analyses of Transportation Investments

DEFF Research Database (Denmark)

Næss, Petter

2006-01-01

This paper discusses the practice of cost-benefit analyses of transportation infrastructure investment projects from the meta-theoretical perspective of critical realism. Such analyses are based on a number of untenable ontological assumptions about social value, human nature and the natural......-to-pay investigations. Accepting the ontological and epistemological assumptions of cost-benefit analysis involves an implicit acceptance of the ethical and political values favoured by these assumptions. Cost-benefit analyses of transportation investment projects tend to neglect long-term environmental consequences...

Analysis of noise radiation mechanisms in hot subsonic jet from a validated large eddy simulation solution

Energy Technology Data Exchange (ETDEWEB)

Lorteau, Mathieu, E-mail: mathieu.lorteau@onera.fr; Cléro, Franck, E-mail: franck.clero@onera.fr; Vuillot, François, E-mail: francois.vuillot@onera.fr [Onera–The French Aerospace Lab, F-92322 Châtillon (France)

2015-07-15

In the framework of jet noise computation, a numerical simulation of a subsonic turbulent hot jet is performed using large-eddy simulation. A geometrical tripping is used in order to trigger the turbulence at the nozzle exit. In a first part, the validity of the simulation is assessed by comparison with experimental measurements. The mean and rms velocity fields show good agreement, so do the azimuthal composition of the near pressure field and the far field spectra. Discrepancies remain close to the nozzle exit which lead to a limited overestimation of the pressure levels in both near and far fields, especially near the 90{sup ∘} angular sector. Two point correlation analyses are then applied to the data obtained from the simulation. These enable to link the downstream acoustic radiation, which is the main direction of radiation, to pressure waves developing in the shear layer and propagating toward the potential core end. The intermittency of the downstream acoustic radiation is evidenced and related to the coherent structures developing in the shear layer.

Project Cost Estimation for Planning

Science.gov (United States)

2010-02-26

For Nevada Department of Transportation (NDOT), there are far too many projects that ultimately cost much more than initially planned. Because project nominations are linked to estimates of future funding and the analysis of system needs, the inaccur...

NASA's Vision for Potential Energy Reduction from Future Generations of Propulsion Technology

Science.gov (United States)

Haller, Bill

2015-01-01

Through a robust partnership with the aviation industry, over the past 50 years NASA programs have helped foster advances in propulsion technology that enabled substantial reductions in fuel consumption for commercial transports. Emerging global trends and continuing environmental concerns are creating challenges that will very likely transform the face of aviation over the next 20-40 years. In recognition of this development, NASA Aeronautics has established a set of Research Thrusts that will help define the future direction of the agency's research technology efforts. Two of these thrusts, Ultra-Efficient Commercial Vehicles and Transition to Low-Carbon Propulsion, serve as cornerstones for the Advanced Air Transport Technology (AATT) project. The AATT project is exploring and developing high-payoff technologies and concepts that are key to continued improvement in energy efficiency and environmental compatibility for future generations of fixed-wing, subsonic transports. The AATT project is primarily focused on the N+3 timeframe, or 3 generations from current technology levels. As should be expected, many of the propulsion system architectures technologies envisioned for N+3 vary significantly from todays engines. The use of batteries in a hybrid-electric configuration or deploying multiple fans distributed across the airframe to enable higher bypass ratios are just two examples of potential advances that could enable substantial energy reductions over current propulsion systems.

Hanford Environmental Dose Reconstruction Project

International Nuclear Information System (INIS)

McMakin, A.H.; Cannon, S.D.; Finch, S.M.

1992-07-01

The objective of the Hanford Environmental Dose Reconstruction (HEDR) Project is to estimate the radiation doses that individuals and populations could have received from nuclear operations at Hanford since 1944. The TSP consists of experts in environmental pathways, epidemiology, surface-water transport, ground-water transport, statistics, demography, agriculture, meteorology, nuclear engineering, radiation dosimetry, and cultural anthropology. Included are appointed technical members representing the states of Oregon, Washington, and Idaho, a representative of Native American tribes, and an individual representing the public. The project is divided into the following technical tasks. These tasks correspond to the path radionuclides followed from release to impact on humans (dose estimates): Source terms, environmental transport, environmental monitoring data, demography, food consumption, and agriculture, and environmental pathways and dose estimates. Progress is discussed

Steady-State Gyrokinetics Transport Code (SSGKT), A Scientific Application Partnership with the Framework Application for Core-Edge Transport Simulations, Final Report

Energy Technology Data Exchange (ETDEWEB)

Fahey, Mark R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Candy, Jeff [General Atomics, San Diego, CA (United States)

2013-11-07

This project initiated the development of TGYRO - a steady-state Gyrokinetic transport code (SSGKT) that integrates micro-scale GYRO turbulence simulations into a framework for practical multi-scale simulation of conventional tokamaks as well as future reactors. Using a lightweight master transport code, multiple independent (each massively parallel) gyrokinetic simulations are coordinated. The capability to evolve profiles using the TGLF model was also added to TGYRO and represents a more typical use-case for TGYRO. The goal of the project was to develop a steady-state Gyrokinetic transport code (SSGKT) that integrates micro-scale gyrokinetic turbulence simulations into a framework for practical multi-scale simulation of a burning plasma core ? the International Thermonuclear Experimental Reactor (ITER) in particular. This multi-scale simulation capability will be used to predict the performance (the fusion energy gain, Q) given the H-mode pedestal temperature and density. At present, projections of this type rely on transport models like GLF23, which are based on rather approximate fits to the results of linear and nonlinear simulations. Our goal is to make these performance projections with precise nonlinear gyrokinetic simulations. The method of approach is to use a lightweight master transport code to coordinate multiple independent (each massively parallel) gyrokinetic simulations using the GYRO code. This project targets the practical multi-scale simulation of a reactor core plasma in order to predict the core temperature and density profiles given the H-mode pedestal temperature and density. A master transport code will provide feedback to O(16) independent gyrokinetic simulations (each massively parallel). A successful feedback scheme offers a novel approach to predictive modeling of an important national and international problem. Success in this area of fusion simulations will allow US scientists to direct the research path of ITER over the next two

Steady, Oscillatory, and Unsteady Subsonic and Supersonic Aerodynamics, production version (SOUSSA-P 1.1). Volume 1: Theoretical manual. [Green function

Science.gov (United States)

Morino, L.

1980-01-01

Recent developments of the Green's function method and the computer program SOUSSA (Steady, Oscillatory, and Unsteady Subsonic and Supersonic Aerodynamics) are reviewed and summarized. Applying the Green's function method to the fully unsteady (transient) potential equation yields an integro-differential-delay equation. With spatial discretization by the finite-element method, this equation is approximated by a set of differential-delay equations in time. Time solution by Laplace transform yields a matrix relating the velocity potential to the normal wash. Premultiplying and postmultiplying by the matrices relating generalized forces to the potential and the normal wash to the generalized coordinates one obtains the matrix of the generalized aerodynamic forces. The frequency and mode-shape dependence of this matrix makes the program SOUSSA useful for multiple frequency and repeated mode-shape evaluations.

A general theory of two- and three-dimensional rotational flow in subsonic and transonic turbomachines

Science.gov (United States)

Wu, Chung-Hua

1993-01-01

This report represents a general theory applicable to axial, radial, and mixed flow turbomachines operating at subsonic and supersonic speeds with a finite number of blades of finite thickness. References reflect the evolution of computational methods used, from the inception of the theory in the 50's to the high-speed computer era of the 90's. Two kinds of relative stream surfaces, S(sub 1) and S(sub 2), are introduced for the purpose of obtaining a three-dimensional flow solution through the combination of two-dimensional flow solutions. Nonorthogonal curvilinear coordinates are used for the governing equations. Methods of computing transonic flow along S(sub 1) and S(sub 2) stream surfaces are given for special cases as well as for fully three-dimensional transonic flows. Procedures pertaining to the direct solutions and inverse solutions are presented. Information on shock wave locations and shapes needed for computations are discussed. Experimental data from a Deutsche Forschungs- und Versuchsanstalt fur Luft- und Raumfahrt e.V. (DFVLR) rotor and from a Chinese Academy of Sciences (CAS) transonic compressor rotor are compared with the computed flow properties.

Rail transportation of Fernald remediation waste

International Nuclear Information System (INIS)

Fellman, R.T.; Lojek, D.A.; Motl, G.P.; Weddendorf, W.K.

1995-01-01

Remediation of the Department of Energy (DOE) Fernald site located north of Cincinnati will generate large quantities of low-level radwaste. This volume includes approximately 1,050,000 tons of material to be removed from eight waste pits comprising Operable Unit 1 (OU-1). The remedial alternative selected includes waste material excavation, drying and transportation by rail to a burial site in the arid west for disposal. Rail transportation was selected not only because rail transportation is safer than truck transportation, but also because of the sheer magnitude of the project and the availability of bulk rail car unloading facilities at a representative disposal site. Based upon current waste quantity estimates as presented in the Feasibility Study for OUI, a fully-loaded 47-car unit train would depart the Fernald site weekly for five years. This paper illustrates the steps taken to obtain agency and public acceptance of the Record of Decision for the remedy which hinged on rail transportation. A preliminary, but detailed, rail transportation plan was prepared for the project to support a series of CERCLA public meetings conducted in late 1994. Some of the major issues addressed in the plan included the following: (1) Scope of project leading to selection of rail transportation; (2) Waste classification; (3) Rail Company overview; (4) Train configuration and rail car selection; (5) Routing; (6) Safety; (7) Prior Notification Requirements (8) Emergency Response. A series of three public meetings identified a number of issues of prime concern to Fernald stakeholders. Following resolution of these issues during the public comment period, a Record of Decision (ROD) approving implementation of the rail transportation strategy was approved pending incorporation of EPA and State of Ohio comments on December 22, 1994

Transportation Energy Futures Series: Freight Transportation Modal Shares: Scenarios for a Low-Carbon Future

Energy Technology Data Exchange (ETDEWEB)

Brogan, J. J.; Aeppli, A. E.; Beagan, D. F.; Brown, A.; Fischer, M. J.; Grenzeback, L. R.; McKenzie, E.; Vimmerstedt, L.; Vyas, A. D.; Witzke, E.

2013-03-01

Truck, rail, water, air, and pipeline modes each serve a distinct share of the freight transportation market. The current allocation of freight by mode is the product of technologic, economic, and regulatory frameworks, and a variety of factors -- price, speed, reliability, accessibility, visibility, security, and safety -- influence mode. Based on a comprehensive literature review, this report considers how analytical methods can be used to project future modal shares and offers insights on federal policy decisions with the potential to prompt shifts to energy-efficient, low-emission modes. There are substantial opportunities to reduce the energy used for freight transportation, but it will be difficult to shift large volumes from one mode to another without imposing considerable additional costs on businesses and consumers. This report explores federal government actions that could help trigger the shifts in modal shares needed to reduce energy consumption and emissions. This is one in a series of reports produced as a result of the Transportation Energy Futures project, a Department of Energy-sponsored multi-agency effort to pinpoint underexplored strategies for reducing GHGs and petroleum dependence related to transportation.

Subsonic Ultra Green Aircraft Research. Phase II - Volume I; Truss Braced Wing Design Exploration

Science.gov (United States)

Bradley, Marty K.; Droney, Christopher K.; Allen, Timothy J.

2015-01-01

This report summarizes the Truss Braced Wing (TBW) work accomplished by the Boeing Subsonic Ultra Green Aircraft Research (SUGAR) team, consisting of Boeing Research and Technology, Boeing Commercial Airplanes, General Electric, Georgia Tech, Virginia Tech, NextGen Aeronautics, and Microcraft. A multi-disciplinary optimization (MDO) environment defined the geometry that was further refined for the updated SUGAR High TBW configuration. Airfoil shapes were tested in the NASA TCT facility, and an aeroelastic model was tested in the NASA TDT facility. Flutter suppression was successfully demonstrated using control laws derived from test system ID data and analysis models. Aeroelastic impacts for the TBW design are manageable and smaller than assumed in Phase I. Flutter analysis of TBW designs need to include pre-load and large displacement non-linear effects to obtain a reasonable match to test data. With the updated performance and sizing, fuel burn and energy use is reduced by 54% compared to the SUGAR Free current technology Baseline (Goal 60%). Use of the unducted fan version of the engine reduces fuel burn and energy by 56% compared to the Baseline. Technology development roadmaps were updated, and an airport compatibility analysis established feasibility of a folding wing aircraft at existing airports.

Study of different biocomposite coatings on Ti alloy by a subsonic thermal spraying technique

Energy Technology Data Exchange (ETDEWEB)

Li Muqin [Provincial Key Laboratory of Biomaterials, Jiamusi University, Heilongjiang Province, 154007 (China); Zhang Rui [College of Stomatology, Jiamusi University, Heilongjiang Province, 154003 (China); Wang Jianping [College of Stomatology, Jiamusi University, Heilongjiang Province, 154003 (China); Yang Shiqin [State Key Laboratory Advanced Welding Production Technology, Harbin Institute of Technology, 150001 (China)

2007-03-01

A subsonic thermal spraying technique (STS) was used to make different biocomposite coatings on titanium alloys for preparing three kinds of implants: 8Ti2G, HA and 8H2B, respectively. The implants were embedded in a region of jaw of dogs whose teeth were pulled out three months previously. The dogs, in two groups, were killed 30 days and 90 days, respectively, after they were operated on. Osteointegration between the implants and host bone was investigated by x-ray, histology and the SEM technique. The results showed that the three kinds of coatings all exhibited good biocompatibility and synostosis, but their osteointegration capability showed a difference and decreased in the sequence of 8H2B, HA and 8Ti2G. The activity of coating, which promoted the reactions between implants and bone tissue, was further increased by the addition of bioglass in the 8H2B coating. Subsequently, chemical bonding was formed, and the osteointegration strength was increased. The study provided a new approach to prepare biocomposite coatings. The 8H2B implants, which formed an integral functional biocomposite coating on Ti alloys, showed a better osteointegration capability with bioactivity and pore gradient variation. A theoretical base was provided for the biocomposite coating application.

Inhibitors of plant hormone transport

Czech Academy of Sciences Publication Activity Database

Klíma, Petr; Laňková, Martina; Zažímalová, Eva

2016-01-01

Roč. 253, č. 6 (2016), s. 1391-1404 ISSN 0033-183X R&D Projects: GA MŠk(CZ) LD15088 Institutional support: RVO:61389030 Keywords : polar auxin transport * acid-binding protein * gnom arf-gef * equilibrative nucleoside transporter * efflux carrier polarity * plasma-membrane-protein * cultured tobacco cells * arabidopsis-thaliana * gravitropic response * brefeldin-a * Plant hormones * Transport * Inhibitors * Auxin * Cytokinins * Strigolactones * Abscisic acid * Cell biology Subject RIV: ED - Physiology Impact factor: 2.870, year: 2016

Generation and transport of laser accelerated ion beams

Energy Technology Data Exchange (ETDEWEB)

Schmidt, Peter; Boine-Frankenheim, Oliver [Technische Univ. Darmstadt (Germany); GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Kornilov, Vladimir; Spaedtke, Peter [GSI Helmholtzzentrum fuer Schwerionenforschung GmbH, Darmstadt (Germany); Collaboration: LIGHT-Collaboration

2013-07-01

Currently the LIGHT- Project (Laser Ion Generation, Handling and Transport) is performed at the GSI Helmholtzzentrum fuer Schwerionenforschung GmbH Darmstadt. Within this project, intense proton beams are generated by laser acceleration, using the TNSA mechanism. After the laser acceleration the protons are transported through the beam pipe by a pulsed power solenoid. To study the transport a VORPAL 3D simulation is compared with CST simulation. A criterion as a function of beam parameters was worked out, to rate the importance of space charge. Furthermore, an exemplary comparison of the solenoid with a magnetic quadrupole-triplet was carried out. In the further course of the LIGHT-Project, it is planned to generate ion beams with higher kinetic energies, using ultra-thin targets. The acceleration processes that can appear are: RPA (Radiation Pressure Acceleration) and BOA (Break-Out Afterburner). Therefore the transport of an ion distribution will be studied, as it emerges from a RPA acceleration.

Highway project cost estimating and management.

Science.gov (United States)

2009-02-01

"This report provides detailed information about the project objectives, deliverables, and findings. The project team : thoroughly reviewed the Montana Department of Transportation (MDT) structure, operations, and current procedures as : related to M...

76 FR 41555 - Tupelo, Mississippi Railroad Relocation Project

Science.gov (United States)

2011-07-14

... Relocation Project AGENCY: Federal Railroad Administration (FRA), U.S. Department of Transportation (DOT... Tupelo, Mississippi Railroad Relocation Project (Project). SUMMARY: The Federal Railroad Administration announces the availability of the Tupelo, Mississippi Railroad Relocation Project Draft Environmental Impact...

Site study plan for Transportation, Deaf Smith County Site, Texas: Preliminary draft

International Nuclear Information System (INIS)

1987-06-01

This site study plan describes transportation field studies to be conducted during the characterization of the Deaf Smith County, Texas, site for the US Department of Energy's Salt Repository Project. The studies are needed to identify and assess potential project impacts to transportation infrastructure and systems in the project vicinity and along potential transportation routes to the site across the State of Texas. The studies are also needed to locate and design project transportation facilities, and to evaluate and design impact mitigation. After identifying the transportation information requirements needed to comply with Federal, State, and local regulations and repository program requirements, the site study plan describes the study design and rationale, the field data collection procedures and equipment, the data analysis methods and application of results, the data management strategy, the schedule of field activities, the management of the study, and the study's quality assurance program. The field data collection activities are organized into programs for the characterization of site vicinity rail corridors and highway corridors, characterization of alternative statewide transportation routes, monitoring of site characterization effects on transportation, characterization of aircraft overflight patterns and hazardous material transportation patterns, and assessment of emergency response preparedness along alternative statewide transportation routes. 34 refs., 10 figs., 2 tabs

NASA N+3 Subsonic Fixed Wing Silent Efficient Low-Emissions Commercial Transport (SELECT) Vehicle Study. Revision A

Science.gov (United States)

Bruner, Sam; Baber, Scott; Harris,Chris; Caldwell, Nicholas; Keding, Peter; Rahrig, Kyle; Pho, Luck; Wlezian, Richard

2010-01-01

A conceptual commercial passenger transport study was performed to define a single vehicle for entry into service in the 2030 to 2035 timeframe, meeting customer demands as well as NASA goals for improved fuel economy, NOx emissions, noise, and operability into smaller airports. A study of future market and operational scenarios was used to guide the design of an advanced tube-and-wing configuration that utilized advanced material and structural concepts, an advanced three-shaft high-bypass turbofan engine, natural laminar flow technology, and a suite of other advanced technologies. This configuration was found to meet the goals for NOx emissions, noise, and field length. A 64 percent improvement in fuel economy compared to a current state-of-the-art airliner was achieved, which fell slightly short of the desired 70 percent goal. Technology maturation plans for the technologies used in the design were developed to help guide future research and development activities.

75 FR 22674 - Moynihan Station Development Project

Science.gov (United States)

2010-04-29

... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration Moynihan Station Development Project... availability of and public comment period for the Moynihan Station Development Project Environmental Assessment... 22675

Vehicle Design Evaluation Program (VDEP). A computer program for weight sizing, economic, performance and mission analysis of fuel-conservative aircraft, multibodied aircraft and large cargo aircraft using both JP and alternative fuels

Science.gov (United States)

Oman, B. H.

1977-01-01

The NASA Langley Research Center vehicle design evaluation program (VDEP-2) was expanded by (1) incorporating into the program a capability to conduct preliminary design studies on subsonic commercial transport type aircraft using both JP and such alternate fuels as hydrogen and methane;(2) incorporating an aircraft detailed mission and performance analysis capability; and (3) developing and incorporating an external loads analysis capability. The resulting computer program (VDEP-3) provides a preliminary design tool that enables the user to perform integrated sizing, structural analysis, and cost studies on subsonic commercial transport aircraft. Both versions of the VDEP-3 Program which are designated preliminary Analysis VDEP-3 and detailed Analysis VDEP utilize the same vehicle sizing subprogram which includes a detailed mission analysis capability, as well as a geometry and weight analysis for multibodied configurations.

Perceptions of transport corridors and intermodal transport - as ways to control the space of freight transport flows

DEFF Research Database (Denmark)

Hansen, Leif Gjesing

2009-01-01

This paper presents empirical findings and results from a study conducted as a part of an INTERREG IIIB project on intermodal transport solutions and corridors in the North Sea Region (SUTRANET - Sustainable Transport Research & Development Network in the North Sea Region (Hansen et.al., 2007......; Kristiansen et.al., 2005 and http://www.sutranet.org/ ). The aim of the study has been to explore possibilities and barriers for the development of intermodal transport solutions in selected corridors in the North Sea Region. The North Sea Region is one among several regions appointed by the EU......-Commission to exemplify the operationalisation of the concept Motorways of the Sea (European Commission, 2004). The policies of promoting Motorways of the Sea is aiming at revitalise the short-sea-shipping within Europe as a transport industry, but also to relieve the heavily congested road network in central regions...

Quantification of risks at the transport of radioactive materials

International Nuclear Information System (INIS)

Hienen, J.F.A.; Jansma, R.

1992-07-01

Requirement of the risks which are coherent with the transport of hazardous elements are for the time being drawn up in a joint project by the Netherlands Ministries of SZW and VROM. In this project 'Requirements of risk for the transport of hazardous elements' (RNVGS) the transport of radioactive elements is not considered. To reach requirements for such a transport, the Directorate of Elements, Safety and Radiation of VROM has provided an assignment to ECN to make a quantitative analysis on the risks of transport of radioactive elements on the road. At the same time, they requested to examine in this performance study whether there are needed additional criteria specific for transport, along the criteria used for individual risk and group-risks. 55 refs., 1 fig., 16 refs

Impacts of transportation sector emissions on future U.S. air quality in a changing climate. Part I: Projected emissions, simulation design, and model evaluation.

Science.gov (United States)

Campbell, Patrick; Zhang, Yang; Yan, Fang; Lu, Zifeng; Streets, David

2018-07-01

Emissions from the transportation sector are rapidly changing worldwide; however, the interplay of such emission changes in the face of climate change are not as well understood. This two-part study examines the impact of projected emissions from the U.S. transportation sector (Part I) on ambient air quality in the face of climate change (Part II). In Part I of this study, we describe the methodology and results of a novel Technology Driver Model (see graphical abstract) that includes 1) transportation emission projections (including on-road vehicles, non-road engines, aircraft, rail, and ship) derived from a dynamic technology model that accounts for various technology and policy options under an IPCC emission scenario, and 2) the configuration/evaluation of a dynamically downscaled Weather Research and Forecasting/Community Multiscale Air Quality modeling system. By 2046-2050, the annual domain-average transportation emissions of carbon monoxide (CO), nitrogen oxides (NO x ), volatile organic compounds (VOCs), ammonia (NH 3 ), and sulfur dioxide (SO 2 ) are projected to decrease over the continental U.S. The decreases in gaseous emissions are mainly due to reduced emissions from on-road vehicles and non-road engines, which exhibit spatial and seasonal variations across the U.S. Although particulate matter (PM) emissions widely decrease, some areas in the U.S. experience relatively large increases due to increases in ship emissions. The on-road vehicle emissions dominate the emission changes for CO, NO x , VOC, and NH 3 , while emissions from both the on-road and non-road modes have strong contributions to PM and SO 2 emission changes. The evaluation of the baseline 2005 WRF simulation indicates that annual biases are close to or within the acceptable criteria for meteorological performance in the literature, and there is an overall good agreement in the 2005 CMAQ simulations of chemical variables against both surface and satellite observations. Copyright © 2018

SDDOT transportation systems management & operations program plan.

Science.gov (United States)

2016-06-01

The objective of this project is the development of a comprehensive Transportation Systems Management and : Operations (TSM&O) Program Plan for the South Dakota Department of Transportation. This plan guides : business planning and strategic decision...

Modeling of Sediment Transport and Self-Cleansing in Sea Outfalls

DEFF Research Database (Denmark)

Larsen, Torben; Ibro, I.

2011-01-01

The paper describes an on-going project on modeling of sediment transport in outfalls with special focus on the self-cleansing problem occurring due to the daily flow variations seen in outfalls. The two central elements of the project is the development of the numerical model and a matching...... physical model in the laboratory. The numerical model covers both sediment transport over bed accumulations as well as transport over clean bottom. The physical modeling emphasizes on measurement of the non-steady removal and transport of welldefined and limited accumulations along the pipe. The paper...

Alligator Rivers Analogue project. Radionuclide transport. Final Report - Volume 14

International Nuclear Information System (INIS)

Golian, C.; Lever, D.A.; Baker, A.J.; Connell, L.D.; Bennett, D.G.; Read, D.; Lindgreen, M.; Pers, K.; Skagius, K.; Murakami, T.; Ohnuki, T.

1992-01-01

The Koongarra orebody and its associated dispersion fan are examined as a geological analogue for the transport of radionuclides from waste repositories. The aim is to build a consistent picture of the transport that has been taking place in the orebody and the important processes controlling the retardation of uranium series isotopes and to test models of radionuclide transport. A particularly distinctive feature of the Koongarra system is the strong seasonal dependence of the groundwater flow. However, the Koongarra system is similar to a radioactive waste disposal system in that mobilization of uranium is taking place as a result of the infiltration of groundwaters that are in gross chemical disequilibrium with the mineralogy of the primary ore body. There are considerable differences between the Koongarra uranium orebody and a radioactive waste repository, particularly a deep waste repository. The Koongarra system is shallow, affected by seasonal hydrogeological changes as well as climatic variations on a longer timescale and transport is taking place in a zone of active weathering. Some of these features make the Koongarra system harder to characterise than a deep repository. However, there are nevertheless many analogies between the processes occurring at Koongarra and those occurring around a deep or shallow waste repository. The difficulties encountered because of the heterogeneity of the Koongarra weathered zone mirror those to be addressed in assessing radionuclide transport in repository systems. The 234 U/ 238 U activity ratios in rock samples from the dispersion fan decrease in the direction of groundwater transport, whereas in many other systems it has been reported that 234 U is preferentially mobile relative to 238 U (Osmond and Cowart, 1982; Osmond et al., 1983). As most uranium resides in the rock rather than in the groundwater, the net recoil flux of uranium daughter radionuclides is usually from the rock to the groundwater, thus leading to ( 234

Alligator Rivers Analogue project. Radionuclide transport. Final Report - Volume 14

Energy Technology Data Exchange (ETDEWEB)

Golian, C [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia); Lever, D A; Baker, A J; Connell, L D [AEA Decommissioning and Radwaste, Harwell (United Kingdom); Bennett, D G; Read, D [WS Atkins Science and Technology Epsom Surrey (United Kingdom); Lindgreen, M; Pers, K; Skagius, K [Kemakta Consultants co., Stockholm (Sweden); Murakami, T; Ohnuki, T [Japan Atomic Energy Research Institute, Tokai-mura, IBARAKI (Japan)

1993-12-31

The Koongarra orebody and its associated dispersion fan are examined as a geological analogue for the transport of radionuclides from waste repositories. The aim is to build a consistent picture of the transport that has been taking place in the orebody and the important processes controlling the retardation of uranium series isotopes and to test models of radionuclide transport. A particularly distinctive feature of the Koongarra system is the strong seasonal dependence of the groundwater flow. However, the Koongarra system is similar to a radioactive waste disposal system in that mobilization of uranium is taking place as a result of the infiltration of groundwaters that are in gross chemical disequilibrium with the mineralogy of the primary ore body. There are considerable differences between the Koongarra uranium orebody and a radioactive waste repository, particularly a deep waste repository. The Koongarra system is shallow, affected by seasonal hydrogeological changes as well as climatic variations on a longer timescale and transport is taking place in a zone of active weathering. Some of these features make the Koongarra system harder to characterise than a deep repository. However, there are nevertheless many analogies between the processes occurring at Koongarra and those occurring around a deep or shallow waste repository. The difficulties encountered because of the heterogeneity of the Koongarra weathered zone mirror those to be addressed in assessing radionuclide transport in repository systems. The {sup 234}U/{sup 238}U activity ratios in rock samples from the dispersion fan decrease in the direction of groundwater transport, whereas in many other systems it has been reported that {sup 234}U is preferentially mobile relative to {sup 238}U (Osmond and Cowart, 1982; Osmond et al., 1983). As most uranium resides in the rock rather than in the groundwater, the net recoil flux of uranium daughter radionuclides is usually from the rock to the groundwater

Alligator Rivers Analogue project. Radionuclide transport. Final Report - Volume 14

Energy Technology Data Exchange (ETDEWEB)

Golian, C. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia); Lever, D.A.; Baker, A.J.; Connell, L.D. [AEA Decommissioning and Radwaste, Harwell (United Kingdom); Bennett, D.G.; Read, D. [WS Atkins Science and Technology Epsom Surrey (United Kingdom); Lindgreen, M.; Pers, K.; Skagius, K. [Kemakta Consultants co., Stockholm (Sweden); Murakami, T.; Ohnuki, T. [Japan Atomic Energy Research Institute, Tokai-mura, IBARAKI (Japan)

1992-12-31

The Koongarra orebody and its associated dispersion fan are examined as a geological analogue for the transport of radionuclides from waste repositories. The aim is to build a consistent picture of the transport that has been taking place in the orebody and the important processes controlling the retardation of uranium series isotopes and to test models of radionuclide transport. A particularly distinctive feature of the Koongarra system is the strong seasonal dependence of the groundwater flow. However, the Koongarra system is similar to a radioactive waste disposal system in that mobilization of uranium is taking place as a result of the infiltration of groundwaters that are in gross chemical disequilibrium with the mineralogy of the primary ore body. There are considerable differences between the Koongarra uranium orebody and a radioactive waste repository, particularly a deep waste repository. The Koongarra system is shallow, affected by seasonal hydrogeological changes as well as climatic variations on a longer timescale and transport is taking place in a zone of active weathering. Some of these features make the Koongarra system harder to characterise than a deep repository. However, there are nevertheless many analogies between the processes occurring at Koongarra and those occurring around a deep or shallow waste repository. The difficulties encountered because of the heterogeneity of the Koongarra weathered zone mirror those to be addressed in assessing radionuclide transport in repository systems. The {sup 234}U/{sup 238}U activity ratios in rock samples from the dispersion fan decrease in the direction of groundwater transport, whereas in many other systems it has been reported that {sup 234}U is preferentially mobile relative to {sup 238}U (Osmond and Cowart, 1982; Osmond et al., 1983). As most uranium resides in the rock rather than in the groundwater, the net recoil flux of uranium daughter radionuclides is usually from the rock to the groundwater

Monte Carlo advances for the Eolus Asci Project

International Nuclear Information System (INIS)

Hendrick, J. S.; McKinney, G. W.; Cox, L. J.

2000-01-01

The Eolus ASCI project includes parallel, 3-D transport simulation for various nuclear applications. The codes developed within this project provide neutral and charged particle transport, detailed interaction physics, numerous source and tally capabilities, and general geometry packages. One such code is MCNPW which is a general purpose, 3-dimensional, time-dependent, continuous-energy Monte Carlo fully-coupled N-Particle transport code. Significant advances are also being made in the areas of modern software engineering and parallel computing. These advances are described in detail

Policy support for large scale demonstration projects for hydrogen use in transport. Deliverable D 5.1 (Part B)

International Nuclear Information System (INIS)

Ros, M.E.; Jeeninga, H.; Godfroij, P.

2007-06-01

This research addresses the possible policy support mechanisms for hydrogen use in transport to answer the question which policy support mechanism potentially is most effective to stimulate hydrogen in transport and especially for large scale demonstrations. This is done by investigating two approaches. First, the possible policy support mechanisms for energy innovations. Second, by relating these to the different technology development stages (R and D, early market and mass market stage) and reviewing their effect on different parts of the hydrogen energy chain (production, distribution and end-use). Additionally, a comparison of the currently policy support mechanisms used in Europe (on EU level) with the United States (National and State level) is made. The analysis shows that in principle various policy support mechanisms can be used to stimulate hydrogen. The choice for a policy support mechanism should depend on the need to reduce the investment cost (euros/MW), production/use cost (euros/GJ) or increase performance (euros/kg CO2 avoided) of a technology during its development. Careful thought has to be put into the design and choice of a policy support mechanism because it can have effects on other parts of the hydrogen energy chain, mostly how hydrogen is produced. The effectiveness of a policy support mechanism greatly depends on the ability to adapt to the developments of the technology and the changing requirements which come with technological progress. In time different policy support mechanisms have to be applied. For demonstration projects there is currently the tendency to apply R and D subsidies in Europe, while the United States applies a variety of policy support mechanisms. The United States not only has higher and more support for demonstration projects but also has stronger incentives to prepare early market demand (for instance requiring public procurement and sales obligations). In order to re-establish the level playing field, Europe may

Transportation and Tourism

Science.gov (United States)

2012-08-01

This project explored the link between transportation and tourism in Texas. A session on transit and tourism was organized and conducted as part of the 2012 Texas Transit Conference. Speakers at the session described public transit services oriented ...

Towards a new generation of flow and transport models for the Aespoe Hard Rock Laboratory. Main results from the project Aespoe models 2005

Energy Technology Data Exchange (ETDEWEB)

Svensson, Urban (ed.) (Computer-aided Fluid Engineering AB (CFE AB), SE-602 10 Norrkoeping (Sweden)); Vidstrand, Patrik (Bergab AB, Goeteborg (Sweden)); Neretnieks, Ivars (Dept. of Chemical Engineering and Technology, Royal Inst. of Technology, Stockholm (Sweden)); Wallin, Bill (Geokema, Lidingoe (Sweden))

2008-05-15

This report constitutes the outcome of a project called 'Aespoe models 2005'. The main objective of the project has been to provide a first step towards a new generation of numerical models of flow and transport, for the Aespoe HRL. In order to achieve this goal, work has been carried out along three parallel lines; discussion of basic concepts, compilation and analysis of data and model applications. A number of sub tasks are reported as appendices in the report. In fact, these appendices represent the main achievements of the project: an analysis of fracture properties, compilation of isotope and chemical data, dispersion and mixing in fractured rocks and model results. The conclusion of the project is that significant contributions to a new generation of Aespoe models have been obtained. It has further been demonstrated that working numerical simulations are up and running. Recommendations are provided for the continued work

Towards a new generation of flow and transport models for the Aespoe Hard Rock Laboratory. Main results from the project Aespoe models 2005

International Nuclear Information System (INIS)

Svensson, Urban; Vidstrand, Patrik; Neretnieks, Ivars; Wallin, Bill

2008-05-01

This report constitutes the outcome of a project called 'Aespoe models 2005'. The main objective of the project has been to provide a first step towards a new generation of numerical models of flow and transport, for the Aespoe HRL. In order to achieve this goal, work has been carried out along three parallel lines; discussion of basic concepts, compilation and analysis of data and model applications. A number of sub tasks are reported as appendices in the report. In fact, these appendices represent the main achievements of the project: an analysis of fracture properties, compilation of isotope and chemical data, dispersion and mixing in fractured rocks and model results. The conclusion of the project is that significant contributions to a new generation of Aespoe models have been obtained. It has further been demonstrated that working numerical simulations are up and running. Recommendations are provided for the continued work

Subsonic Longitudinal Performance Coefficient Extraction from Shuttle Flight Data: an Accuracy Assessment for Determination of Data Base Updates

Science.gov (United States)

Findlay, J. T.; Kelly, G. M.; Mcconnell, J. G.; Compton, H. R.

1983-01-01

Longitudinal performance comparisons between flight derived and predicted values are presented for the first five NASA Space Shuttle Columbia flights. Though subsonic comparisons are emphasized, comparisons during the transonic and low supersonic regions of flight are included. Computed air data information based on the remotely sensed atmospheric measurements as well as in situ Orbiter Air Data System (ADS) measurements were incorporated. Each air data source provides for comparisons versus the predicted values from the LaRC data base. Principally, L/D, C sub L, and C sub D, comparisons are presented, though some pitching moment results are included. Similarities in flight conditions and spacecraft configuration during the first five flights are discussed. Contributions from the various elements of the data base are presented and the overall differences observed between the flight and predicted values are discussed in terms of expected variations. A discussion on potential data base updates is presented based on the results from the five flights to date.

23 CFR 710.307 - Project agreement.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Project agreement. 710.307 Section 710.307 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RIGHT-OF-WAY AND ENVIRONMENT RIGHT-OF-WAY AND REAL ESTATE Project Development § 710.307 Project agreement. As a condition of Federal-aid, the STD...

Sustainable transportation for tourism : indicators and standards.

Science.gov (United States)

2013-11-01

The overall project goal of guiding planning and management of transportation to serve the needs of : sustainable tourism focused on three tourism-related transportation contexts. The first context was : selected types of roads important to tourism i...

Sustainable transportation for tourism : green certification programs.

Science.gov (United States)

2013-11-01

The overall project goal of guiding planning and management of transportation to serve the needs of : sustainable tourism focused on three tourism-related transportation contexts. The first context was : selected types of roads important to tourism i...

Green transportation logistics: the quest for win-win solutions

DEFF Research Database (Denmark)

measures and speed and route optimization; Sulphur emissions; Lifecycle emissions; Green rail transportation; Green air transportation; Green inland navigation and possible areas for further research. Throughout, the book pursues the goal of “win-win” solutions and analyzes the phenomenon of “push......This book examines the state of the art in green transportation logistics from the perspective of balancing environmental performance in the transportation supply chain while also satisfying traditional economic performance criteria. Part of the book is drawn from the recently completed European...... Union project Super Green, a three-year project intended to promote the development of European freight corridors in an environmentally friendly manner. Additional chapters cover both the methodological base and the application context of green transportation logistics. Individual chapters look...

Heat transport the cold way

International Nuclear Information System (INIS)

Anon.

1981-01-01

A novel system for long-distance heat transport is being born in the 'Kernforschungsanlage Juelich' with the project being called 'Nukleare Fernenergie' (nuclear district energy). The project is also known as 'EVA/ADAM' [EVA = Einzelrohr-Versuchs-Anlage (single tube test facility); ADAM = Anlage mit Drei Adiabaten Methanisierungsreaktoren (plant provided with three adiabate methanising reactors)] and is based in principle on transport of energy in chemical bond within a closed loop. In the 60ies already this development was discussed both in the 'Kernforschungsanlage Juelich' and in the 'Rheinische Braunkohlenwerke' independent of each other. In 1975 these two organizations concluded a co-operation contract. (orig.) [de

Advanced Subsonic Technology (AST) 22-Inch Low Noise Research Fan Rig Preliminary Design of ADP-Type Fan 3

Science.gov (United States)

Jeracki, Robert J. (Technical Monitor); Topol, David A.; Ingram, Clint L.; Larkin, Michael J.; Roche, Charles H.; Thulin, Robert D.

2004-01-01

This report presents results of the work completed on the preliminary design of Fan 3 of NASA s 22-inch Fan Low Noise Research project. Fan 3 was intended to build on the experience gained from Fans 1 and 2 by demonstrating noise reduction technology that surpasses 1992 levels by 6 dB. The work was performed as part of NASA s Advanced Subsonic Technology (AST) program. Work on this task was conducted in the areas of CFD code validation, acoustic prediction and validation, rotor parametric studies, and fan exit guide vane (FEGV) studies up to the time when a NASA decision was made to cancel the design, fabrication and testing phases of the work. The scope of the program changed accordingly to concentrate on two subtasks: (1) Rig data analysis and CFD code validation and (2) Fan and FEGV optimization studies. The results of the CFD code validation work showed that this tool predicts 3D flowfield features well from the blade trailing edge to about a chord downstream. The CFD tool loses accuracy as the distance from the trailing edge increases beyond a blade chord. The comparisons of noise predictions to rig test data showed that both the tone noise tool and the broadband noise tool demonstrated reasonable agreement with the data to the degree that these tools can reliably be used for design work. The section on rig airflow and inlet separation analysis describes the method used to determine total fan airflow, shows the good agreement of predicted boundary layer profiles to measured profiles, and shows separation angles of attack ranging from 29.5 to 27deg for the range of airflows tested. The results of the rotor parametric studies were significant in leading to the decision not to pursue a new rotor design for Fan 3 and resulted in recommendations to concentrate efforts on FEGV stator designs. The ensuing parametric study on FEGV designs showed the potential for 8 to 10 EPNdB noise reduction relative to the baseline.

A Laplace transform/potential-theoretic method for acoustic propagation in subsonic flows

International Nuclear Information System (INIS)

Hariharan, S.I.; Sawyer, Scott; Dane Quinn, D.

2003-01-01

This paper introduces a competitive computational approach for determining time-dependent far-field sound generated by subsonic flows around lifting airfoils. The procedure assumes the linearity of the sound field away from a bounded region surrounding the airfoil. It is assumed that the sound pressure on the boundary of this enclosed region (referred to as the Kirchhoff surface) is specified, possibly by another procedure such as solving the full Euler equations. Away from the Kirchhoff surface, the Euler equations are linearized about a uniform mean flow. It is well known that linearized Euler equations can be uncoupled into a scalar convective wave equation. However, due to the anisotropy present in the convective wave equation, it is difficult to compute solutions. In this context, direct numerical simulation of the convective wave equation requires proper numerical descriptions of far-field boundary conditions which is a non-trivial task. Moreover, if accurate far-field conditions can be formulated, the computational cost of direct simulation can be prohibitive even in a modest computational domain. In this paper, we present an alternate solution procedure. First, the problem is transformed via the Laplace transform (with appropriate initial conditions) into a reduced wave equation. The convective term in the reduced wave equation is removed using a dependent variable transformation. Then we use Gothert's rule, to obtain a Helmholtz like equation with complex wave number, which is subsequently solved using double layer potential theory. Finally upon application of numerical inverse Laplace transform techniques, far-field acoustic pressure is obtained as a function of space and time

Benin - Transport Sector Investment Program

OpenAIRE

Mohan, P.C.

2003-01-01

The objectives of this project (1997-2001) using $40 million of IDA funds were to: (i) safeguard the competitiveness of Benin's transport sector and of its transit corridor through open modal competition; (ii) improve government's capacity for planning, programming and managing transport sector investments; (iii) boost the allocation of resources to infrastructure maintenance; (iv) boost t...

Socio-economic Impact of Sethusamudram Project

OpenAIRE

Kannan, Srinivasan

2007-01-01

Any major development project has both benefits and disadvantages to the society. Many development projects have very high economic benefit and at the same time lead to environmental hazard. One such project is Sethudamudram project initiated by Government of India. This is a project which aims at minimising the distance of navigation for the goods transport in the sea. This paper is an attempt to study the socio-economic impact of the project based on the secondary data.

The Palm Desert renewable [hydrogen] transportation system

Energy Technology Data Exchange (ETDEWEB)

Chamberlin, C.E.; Lehman, P. [Humboldt State Univ., Arcata, CA (United States). Schatz Energy Research Center

1998-08-01

This paper describes the Schatz Energy Research Center (SERC) progress on the Palm Desert Renewable Hydrogen Transportation System Project for the period June 1997 through May 1998. The project began in March 1996. The goal of the Palm Desert Project is to develop a clean and sustainable transportation system for a community. The project demonstrates the practical utility of hydrogen as a transportation fuel and the proton exchange membrane (PEM) fuel cell as a vehicle power system. The project includes designing and building 4 fuel cell powered vehicles, a solar hydrogen generating and refueling station, and a fuel cell vehicle diagnostic center. Over this last year, SERC has built a fuel cell powered neighborhood electric vehicle and delivered it to the City of Palm Desert. The design of the hydrogen refueling station is near completion and it is anticipated that construction will be complete in the fall of 1998. The vehicles are currently being refueled at a temporary refueling station. The diagnostic center is being designed and maintenance procedures as well as computer diagnostic programs for the fuel cell vehicles are being developed. City employees are driving the vehicles daily and monitoring data are being collected. The drivers are pleased with the performance of the vehicles.

A transportation economics reference for practitioners : final report.

Science.gov (United States)

2013-03-01

Transportation projects and policies are rooted in economic considerations and consequences. This report : documents the development of a relatively comprehensive transportation economics reference for practitioners, : entitled The Economics of Trans...

University of Tennessee Center for Space Transportation and Applied Research (CSTAR)

Science.gov (United States)

1995-10-01

The Center for Space Transportation and Applied Research had projects with space applications in six major areas: laser materials processing, artificial intelligence/expert systems, space transportation, computational methods, chemical propulsion, and electric propulsion. The closeout status of all these projects is addressed.

University of Tennessee Center for Space Transportation and Applied Research (CSTAR)

Science.gov (United States)

1995-01-01

The Center for Space Transportation and Applied Research had projects with space applications in six major areas: laser materials processing, artificial intelligence/expert systems, space transportation, computational methods, chemical propulsion, and electric propulsion. The closeout status of all these projects is addressed.

Teaching cases on transportation and global warming.

Science.gov (United States)

2013-03-01

This project developed a series of three teaching cases that explore the implications of global : warming for transportation policy in the United States. The cases are intended to be used in : graduate and undergraduate courses on transportation poli...

Transport policies related to climate change mitigation

DEFF Research Database (Denmark)

Mathiesen, Brian Vad; Kappel, Jannik

and their results are introduced as well. To provide an overview of current trends, related scientific projects and other analyses on climate change mitigation and transport are given in the report. The references used in this report can also serve as a source of data and inspiration for the reader. This report......This report presents the Danish national policies on reducing the emissions of greenhouse gasses and reducing Denmark’s dependency on fossil fuels in the transport sector, as well as some of the results of the policies. Systematic focus on efficient transport and climate mitigation started in 2008...... challenges for the transport sectors, which has not yet been systematically analysed from any Governmental body. In this report we list projects which have done so. The first chapter describes policies and initiatives of international relevance within climate mitigation. The following chapters explain...

Transportation Energy Futures Series: Effects of the Built Environment on Transportation: Energy Use, Greenhouse Gas Emissions, and Other Factors

Energy Technology Data Exchange (ETDEWEB)

Porter, C. D.; Brown, A.; Dunphy, R. T.; Vimmerstedt, L.

2013-03-01

Planning initiatives in many regions and communities aim to reduce transportation energy use, decrease emissions, and achieve related environmental benefits by changing land use. This report reviews and summarizes findings from existing literature on the relationship between the built environment and transportation energy use and greenhouse gas emissions, identifying results trends as well as potential future actions. The indirect influence of federal transportation and housing policies, as well as the direct impact of municipal regulation on land use are examined for their effect on transportation patterns and energy use. Special attention is given to the 'four D' factors of density, diversity, design and accessibility. The report concludes that policy-driven changes to the built environment could reduce transportation energy and GHG emissions from less than 1% to as much as 10% by 2050, the equivalent of 16%-18% of present-day urban light-duty-vehicle travel. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

Transportation Energy Futures Series. Effects of the Built Environment on Transportation. Energy Use, Greenhouse Gas Emissions, and Other Factors

Energy Technology Data Exchange (ETDEWEB)

Porter, C. D. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Inc., Golden, CO (United States); Brown, A. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Inc., Golden, CO (United States); Dunphy, R. T. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Inc., Golden, CO (United States); Vimmerstedt, L. [National Renewable Energy Lab. (NREL) and Cambridge Systematics, Inc., Golden, CO (United States)

2013-03-15

Planning initiatives in many regions and communities aim to reduce transportation energy use, decrease emissions, and achieve related environmental benefits by changing land use. This report reviews and summarizes findings from existing literature on the relationship between the built environment and transportation energy use and greenhouse gas emissions, identifying results trends as well as potential future actions. The indirect influence of federal transportation and housing policies, as well as the direct impact of municipal regulation on land use are examined for their effect on transportation patterns and energy use. Special attention is given to the 'four D' factors of density, diversity, design and accessibility. The report concludes that policy-driven changes to the built environment could reduce transportation energy and GHG emissions from less than 1% to as much as 10% by 2050, the equivalent of 16%-18% of present-day urban light-duty-vehicle travel. This is one of a series of reports produced as a result of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

Development of a Large Field-of-View PIV System for Rotorcraft Testing in the 14- x 22-Foot Subsonic Tunnel

Science.gov (United States)

Jenkins, Luther N.; Yao, Chung-Sheng; Bartram, Scott M.; Harris, Jerome; Allan, Brian; Wong, Oliver; Mace, W. Derry

2009-01-01

A Large Field-of-View Particle Image Velocimetry (LFPIV) system has been developed for rotor wake diagnostics in the 14-by 22-Foot Subsonic Tunnel. The system has been used to measure three components of velocity in a plane as large as 1.524 meters by 0.914 meters in both forward flight and hover tests. Overall, the system performance has exceeded design expectations in terms of accuracy and efficiency. Measurements synchronized with the rotor position during forward flight and hover tests have shown that the system is able to capture the complex interaction of the body and rotor wakes as well as basic details of the blade tip vortex at several wake ages. Measurements obtained with traditional techniques such as multi-hole pressure probes, Laser Doppler Velocimetry (LDV), and 2D Particle Image Velocimetry (PIV) show good agreement with LFPIV measurements.

Geographic specificity and positionality of public input in transportation: a rural transportation planning case from Central Texas

Directory of Open Access Journals (Sweden)

Greg P. Griffin

2014-01-01

Full Text Available Current transportation planning processes often incorporate public input, but the types of engagement techniques can affect the ability of practitioners to meaningfully include local ideas. This study incorporates literature integrating communicative rationality with participatory mapping, supported by a case study focusing on two public engagement techniques. A transportation planning process in Central Texas is evaluated in terms of the geographic specificity and positionality of comments received from open-ended responses on a questionnaire and a facilitated mapping session, and reviews this input for relevance to developing a transportation plan. Although all input received from the public can be valuable in the process, location-based comments may be more actionable by transportation planners. Participants’ perceived roles likely affect their level of engagement, which planners can facilitate to maximize the quality of involvement. Planners are advised to understand the positionality of project stakeholders and professionals, designing involvement methods considering geographic specificity appropriate for each project.

Developing a stochastic traffic volume prediction model for public-private partnership projects

Science.gov (United States)

Phong, Nguyen Thanh; Likhitruangsilp, Veerasak; Onishi, Masamitsu

2017-11-01

Transportation projects require an enormous amount of capital investment resulting from their tremendous size, complexity, and risk. Due to the limitation of public finances, the private sector is invited to participate in transportation project development. The private sector can entirely or partially invest in transportation projects in the form of Public-Private Partnership (PPP) scheme, which has been an attractive option for several developing countries, including Vietnam. There are many factors affecting the success of PPP projects. The accurate prediction of traffic volume is considered one of the key success factors of PPP transportation projects. However, only few research works investigated how to predict traffic volume over a long period of time. Moreover, conventional traffic volume forecasting methods are usually based on deterministic models which predict a single value of traffic volume but do not consider risk and uncertainty. This knowledge gap makes it difficult for concessionaires to estimate PPP transportation project revenues accurately. The objective of this paper is to develop a probabilistic traffic volume prediction model. First, traffic volumes were estimated following the Geometric Brownian Motion (GBM) process. Monte Carlo technique is then applied to simulate different scenarios. The results show that this stochastic approach can systematically analyze variations in the traffic volume and yield more reliable estimates for PPP projects.

LNG in transportation

International Nuclear Information System (INIS)

Madden, Mike; White, Nick; Le Fevre, Chris

2014-01-01

This document summarizes the content of a 402 p. study published by CEDIGAZ, the International Center for Natural Gas Information. According to this study, LNG as a fuel will capture a significant market share in the transport sector by 2035. The greatest potential is seen in road transport, were annual demand is projected to reach 96 million tons per year (mtpa) in CEDIGAZ' base scenario while demand in the marine sector could grow to an estimated 77 mtpa. The rail sector could add another 6 mtpa to global demand. However, the development of LNG as a transport fuel faces a number of challenges, and will have to go hand in hand with the development of fueling infrastructure

Framework for Sustainability Assessment by Transportation Agencies

DEFF Research Database (Denmark)

Ramani, Tara Lakshmi; Zietsman, Josias; Gudmundsson, Henrik

2011-01-01

and outcomes. The framework development process was an extension of findings from literature review, case studies, and interviews conducted as part of ongoing research under the NCHRP project Sustainability Performance Measures for State Departments of Transportation and Other Transportation Agencies...

Fluvial geomorphology and suspended-sediment transport during construction of the Roanoke River Flood Reduction Project in Roanoke, Virginia, 2005–2012

Science.gov (United States)

Jastram, John D.; Krstolic, Jennifer L.; Moyer, Douglas; Hyer, Kenneth

2015-09-30

Beginning in 2005, after decades of planning, the U.S. Army Corps of Engineers (USACE) undertook a major construction effort to reduce the effects of flooding on the city of Roanoke, Virginia—the Roanoke River Flood Reduction Project (RRFRP). Prompted by concerns about the potential for RRFRP construction-induced geomorphological instability and sediment liberation and the detrimental effects these responses could have on the endangered Roanoke logperch (Percina rex), the U.S. Geological Survey (USGS) partnered with the USACE to provide a real-time warning network and a long-term monitoring program to evaluate geomorphological change and sediment transport in the affected river reach. Geomorphological change and suspended-sediment transport are highly interdependent and cumulatively provide a detailed understanding of the sedimentary response, or lack thereof, of the Roanoke River to construction of the RRFRP.

LNG projects - nationally and internationally

International Nuclear Information System (INIS)

Graff, Oscar Fr.

2006-01-01

The presentation discusses various aspects of LNG projects nationally and internationally. The emphasis is on the future development of the natural gas markets, the competitiveness and economic requirements of the LNG production and transportation systems and the demands LNG projects will have to competence, technology, products and management

Designing Alternative Transport Methods for the Distributed Data Collection of ATLAS EventIndex Project

CERN Document Server

Fernandez Casani, Alvaro; The ATLAS collaboration

2016-01-01

One of the key and challenging tasks of the ATLAS EventIndex project is to index and catalog all the produced events not only at CERN but also at hundreds of worldwide grid sites, and convey the data in real time to a central Hadoop instance at CERN. While this distributed data collection is currently operating correctly in production, there are some issues that might impose performance bottlenecks in the future, with an expected rise in the event production and reprocessing rates. In this work, we first describe the current approach based on a messaging system, which conveys the data from the sources to the central catalog, and we identify some weaknesses of this system. Then, we study a promising alternative transport method based on an object store, presenting a performance comparison with the current approach, and the architectural design changes needed to adapt the system to the next run of the ATLAS experiment at CERN.

Packaging and transportation of radioactively contaminated lead

International Nuclear Information System (INIS)

Gleason, Eugene; Holden, Gerard

2007-01-01

Under the management of the Nuclear Decommissioning Authority (NDA) the government of the United Kingdom has launched an ambitious program to remediate the nation's nuclear waste legacy. Over a twenty-five year period NDA plans to decommission several first generation nuclear power plants and other radioactive facilities. The use innovative, safe 'fit for purpose' technologies will be a major part of this complex program. This paper will present a case study of a recently completed project undertaken in support of the nuclear decommissioning activities at the Sellafield site in the United Kingdom. The focus is on an innovative application of new packaging technology developed for the safe transportation of radioactively contaminated lead objects. Several companies collaborated on the project and contributed to its safe and successful conclusion. These companies include British Nuclear Group, Gravatom Engineering, W. F. Bowker Transport, Atlantic Container Lines, MHF Logistical Solutions and Energy Solutions. New containers and a new innovative inter-modal packaging system to transport the radioactive lead were developed and demonstrated during the project. The project also demonstrated the potential contribution of international nuclear recycling activities as a safe, economic and feasible technical option for nuclear decommissioning in the United Kingdom. (authors)

Innovations for sustainable public transport

DEFF Research Database (Denmark)

Hrelja, Robert; Hansson, Lisa; Richardson, Tim

The aim of the project has been to analyse institutional and planning conditions for public transport in the Scandinavian countries from a comparative perspective, looking at the county of Skåne (Sweden) and the municipalities of Aarhus (Denmark) and Trondheim (Norway). The report considers...... qualitative case- studies of public transport in Skåne, Aarhus, and Trondheim, and uses an empirical material consisting of written material and interviews. It concludes that: (i) new forms of coordination between organizations and policy areas are called for in a number of critical areas, if public transport...... is to contribute effectively to the development of an efficient and sustainable transport system (for example, forms for the coordination of public transport, land use, and infrastructure planning); (ii) public transport must not be seen as an end in itself, or as merely a technical transport system; (iii...

NNP-LANL Utilities - Condition Assessment and Project Approach

Energy Technology Data Exchange (ETDEWEB)

Stewart, Grant Lorenz [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-11-21

This report is a presentation on LANL Utilities & Transportation Asset Management; Utility Assets Overview; Condition Assessment; Utilities Project Nominations & Ranking; and Utilities Project Execution.

A state-of-the-art review of transportation systems evaluation techniques relevant to air transportation, volume 1. [urban planning and urban transportation using decision theory

Science.gov (United States)

Haefner, L. E.

1975-01-01

Mathematical and philosophical approaches are presented for evaluation and implementation of ground and air transportation systems. Basic decision processes are examined that are used for cost analyses and planning (i.e, statistical decision theory, linear and dynamic programming, optimization, game theory). The effects on the environment and the community that a transportation system may have are discussed and modelled. Algorithmic structures are examined and selected bibliographic annotations are included. Transportation dynamic models were developed. Citizen participation in transportation projects (i.e, in Maryland and Massachusetts) is discussed. The relevance of the modelling and evaluation approaches to air transportation (i.e, airport planning) is examined in a case study in St. Louis, Missouri.

Activities of NASA's Global Modeling Initiative (GMI) in the Assessment of Subsonic Aircraft Impact

Science.gov (United States)

Rodriquez, J. M.; Logan, J. A.; Rotman, D. A.; Bergmann, D. J.; Baughcum, S. L.; Friedl, R. R.; Anderson, D. E.

2004-01-01

The Intergovernmental Panel on Climate Change estimated a peak increase in ozone ranging from 7-12 ppbv (zonal and annual average, and relative to a baseline with no aircraft), due to the subsonic aircraft in the year 2015, corresponding to aircraft emissions of 1.3 TgN/year. This range of values presumably reflects differences in model input (e.g., chemical mechanism, ground emission fluxes, and meteorological fields), and algorithms. The model implemented by the Global Modeling Initiative allows testing the impact of individual model components on the assessment calculations. We present results of the impact of doubling the 1995 aircraft emissions of NOx, corresponding to an extra 0.56 TgN/year, utilizing meteorological data from NASA's Data Assimilation Office (DAO), the Goddard Institute for Space Studies (GISS), and the Middle Atmosphere Community Climate Model, version 3 (MACCM3). Comparison of results to observations can be used to assess the model performance. Peak ozone perturbations ranging from 1.7 to 2.2 ppbv of ozone are calculated using the different fields. These correspond to increases in total tropospheric ozone ranging from 3.3 to 4.1 Tg/Os. These perturbations are consistent with the IPCC results, due to the difference in aircraft emissions. However, the range of values calculated is much smaller than in IPCC.

Wheelchairmanship Project. A Program to Educate Personnel in the Transportation, Hotel and Restaurant, and Entertainment Industries in Improved Techniques for Serving Disabled People. Final Report.

Science.gov (United States)

Smith, Anita P.; And Others

In a project designed to train customer service personnel in improved methods of assisting the physically disabled, audio-visual training materials were developed and presented during 2-week courses involving 1,058 employees at transportation, hotel/restaurant, and entertainment centers in 25 cities. The participants judged the training program…

23 CFR 650.405 - Eligible projects.

Science.gov (United States)

2010-04-01

... FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Highway Bridge Replacement and Rehabilitation Program § 650.405 Eligible projects... rehabilitation. (b) Types of projects which are eligible. The following types of work are eligible for...

Overview of multifluid-flow-calculation methods

International Nuclear Information System (INIS)

Stewart, H.B.

1981-01-01

Two categories of numerical methods which may be useful in multiphase flow research are discussed. The first category includes methods which are specifically intended for accurate computation of discontinuities, such as the method of characteristics, particle-in-cell method, flux-corrected transport, and random choice methods. Methods in this category could be applied to research on rocket exhaust plumes and interior ballistics. The second category includes methods for smooth, subsonic flows, such as fractional step methods, semi-implicit method, and methods which treat convection implicitly. The subsonic flow methods could be of interest for ice flows

Planning international transit oil pipeline projects in Croatia

International Nuclear Information System (INIS)

Sekulic, G.; Vrbic, D.

2004-01-01

Planning and development of international oil pipeline projects are aimed primarily at enhancing the safety of crude oil supply. Pipeline development is affected by a variety of overlapping factors, such as energy - and environment-protection-related factors, as well as political, economic, legislative, social, technical and technological ones. The success of any pipeline planning, construction and operation in the present conditions will depend upon the degree to which the above factors have been brought in line with global trends. The government should create stable political, economic and legislative frameworks that will meet the global requirements of crude oil transport development. As regards (new) transportation companies, their function is to secure safe transport by providing competitive tariffs and granting environmental protection. A prerequisite for the pipeline planning is to have both major crude oil consumers and producers (as well as their economic and political integrations) consider any state or company as potential partners for crude oil transport and transit, respectively. Croatia and the JANAF transport company have been 'chosen' as one of priority routes for European supply with crude oil from the Caspian region and Russia and one of the directions for Russian crude oil export due to a number of advantages, opportunities and prospects for a successful development. Two international oil pipeline projects - the Druzba Adria Project and the Constanta-Pancevo-Omisalj-Trieste Project - are currently under consideration. The government commitment towards these projects has been documented by the Croatian Energy Development Strategy (April 2002) and by the Programme for its implementation (March 2004). JANAF has assumed the responsibility for carrying out the project preparation activities assigned to it by the Croatian Government and the pertinent ministries. Cooperation between JANAF and government institutions is an integral part of the procedure

Parabolized Stability Equations analysis of nonlinear interactions with forced eigenmodes to control subsonic jet instabilities

International Nuclear Information System (INIS)

Itasse, Maxime; Brazier, Jean-Philippe; Léon, Olivier; Casalis, Grégoire

2015-01-01

Nonlinear evolution of disturbances in an axisymmetric, high subsonic, high Reynolds number hot jet with forced eigenmodes is studied using the Parabolized Stability Equations (PSE) approach to understand how modes interact with one another. Both frequency and azimuthal harmonic interactions are analyzed by setting up one or two modes at higher initial amplitudes and various phases. While single mode excitation leads to harmonic growth and jet noise amplification, controlling the evolution of a specific mode has been made possible by forcing two modes (m 1 , n 1 ), (m 2 , n 2 ), such that the difference in azimuth and in frequency matches the desired “target” mode (m 1 − m 2 , n 1 − n 2 ). A careful setup of the initial amplitudes and phases of the forced modes, defined as the “killer” modes, has allowed the minimizing of the initially dominant instability in the near pressure field, as well as its estimated radiated noise with a 15 dB loss. Although an increase of the overall sound pressure has been found in the range of azimuth and frequency analyzed, the present paper reveals the possibility to make the initially dominant instability ineffective acoustically using nonlinear interactions with forced eigenmodes

Parabolized Stability Equations analysis of nonlinear interactions with forced eigenmodes to control subsonic jet instabilities

Energy Technology Data Exchange (ETDEWEB)

Itasse, Maxime, E-mail: Maxime.Itasse@onera.fr; Brazier, Jean-Philippe, E-mail: Jean-Philippe.Brazier@onera.fr; Léon, Olivier, E-mail: Olivier.Leon@onera.fr; Casalis, Grégoire, E-mail: Gregoire.Casalis@onera.fr [Onera - The French Aerospace Lab, F-31055 Toulouse (France)

2015-08-15

Nonlinear evolution of disturbances in an axisymmetric, high subsonic, high Reynolds number hot jet with forced eigenmodes is studied using the Parabolized Stability Equations (PSE) approach to understand how modes interact with one another. Both frequency and azimuthal harmonic interactions are analyzed by setting up one or two modes at higher initial amplitudes and various phases. While single mode excitation leads to harmonic growth and jet noise amplification, controlling the evolution of a specific mode has been made possible by forcing two modes (m{sub 1}, n{sub 1}), (m{sub 2}, n{sub 2}), such that the difference in azimuth and in frequency matches the desired “target” mode (m{sub 1} − m{sub 2}, n{sub 1} − n{sub 2}). A careful setup of the initial amplitudes and phases of the forced modes, defined as the “killer” modes, has allowed the minimizing of the initially dominant instability in the near pressure field, as well as its estimated radiated noise with a 15 dB loss. Although an increase of the overall sound pressure has been found in the range of azimuth and frequency analyzed, the present paper reveals the possibility to make the initially dominant instability ineffective acoustically using nonlinear interactions with forced eigenmodes.

Subsonic Ultra Green Aircraft Research: Phase II- Volume III-Truss Braced Wing Aeroelastic Test Report

Science.gov (United States)

Bradley, Marty K.; Allen, Timothy J.; Droney, Christopher

2014-01-01

This Test Report summarizes the Truss Braced Wing (TBW) Aeroelastic Test (Task 3.1) work accomplished by the Boeing Subsonic Ultra Green Aircraft Research (SUGAR) team, which includes the time period of February 2012 through June 2014. The team consisted of Boeing Research and Technology, Boeing Commercial Airplanes, Virginia Tech, and NextGen Aeronautics. The model was fabricated by NextGen Aeronautics and designed to meet dynamically scaled requirements from the sized full scale TBW FEM. The test of the dynamically scaled SUGAR TBW half model was broken up into open loop testing in December 2013 and closed loop testing from January 2014 to April 2014. Results showed the flutter mechanism to primarily be a coalescence of 2nd bending mode and 1st torsion mode around 10 Hz, as predicted by analysis. Results also showed significant change in flutter speed as angle of attack was varied. This nonlinear behavior can be explained by including preload and large displacement changes to the structural stiffness and mass matrices in the flutter analysis. Control laws derived from both test system ID and FEM19 state space models were successful in suppressing flutter. The control laws were robust and suppressed flutter for a variety of Mach, dynamic pressures, and angle of attacks investigated.

Lessons from Transportation Agency Participation In Regional Conservation Initiatives

OpenAIRE

Lederman, Jaimee

2017-01-01

Transportation agencies struggle to maximize the benefits of transportation infrastructure while minimizing environmental harm. This dissertation examines institutional collaborations that integrate capital investments (e.g. highway and rail projects) with regional Habitat Conservation Plans (RHCPs) under the Endangered Species Act (ESA). It addresses ways of maintaining these collaborations over time. The ESA requires that public and private project developers mitigate any harm to endangered...

Environmentally sustainable transport in Germany

International Nuclear Information System (INIS)

Verron, H.; Friedrich, A.

2004-01-01

The study reported in this paper is part of an OECD project with several case studies in different countries. The purpose of the project was to look for possible ways to reduce the environmental impact of transport to a level which is compatible with sustainability. The participants in the case studies agreed upon quantifying criteria for carbon dioxide, nitrogen oxides and volatile organic compounds, which should describe environmentally sustainable transport (EST), and each case study constructed a business-as-usual scenario and three EST scenarios, considering the period from 1990 to 2030. Each EST scenario should meet the criteria in a backcasting effort, EST1 looking for solely technical solutions, EST2 restricting and shifting transport volumes while ignoring technological progress, and EST3 combining components of both strategies. In the German case study criteria were additionally quantified for particulate matter, noise and land-take for transport purposes. The German EST1 scenario is based on hybrid electric hypercars, hydrogen for public transport, freight and aviation, and electricity from renewable sources. In the EST2 scenario total transport activity for passenger and freight transport had to be reduced by 40% and 25% respectively, compared to 1990 in order to meet the criteria. In the EST3 scenario, while highly energy efficient conventional propulsion systems and engines were used, total passenger transport decreased only slightly and freight transport even increased. Implementation measures were then defined on the basis of the EST3 scenario. Emission regulation, fuel tax, and road pricing for heavy duty vehicles were the key features in order to achieve EST in this case study. They were complemented by additional sets of measures, designed to prevent urban sprawl, diminish freight traffic growth, increase liveability of towns, improve the infrastructure and service conditions of alternative modes as well as provide energy supply by regenerative