WorldWideScience

Sample records for subsection includes descriptions

  1. Studies in Coprinus III — Coprinus section Veliformes. Subdivision and revision of subsection Nivei emend

    NARCIS (Netherlands)

    Uljé, C.B.; Noordeloos, M.E.

    1993-01-01

    Coprinus section Veliformes is defined and delimited to comprise four subsections: subsection Micacei, subsection Domestici, subsection Nivei, and subsection Narcotici, subsection nov. A key to the subsections is given. Subsection Nivei is emended, including also most taxa of subsection Flocculosi

  2. Description of comprehensive pump test change to ASME OM code, subsection ISTB

    International Nuclear Information System (INIS)

    Hartley, R.S.

    1994-01-01

    The American Society of Mechanical Engineers (ASME) Operations and Maintenance (OM) Main Committee and Board on Nuclear Codes and Standards (BNCS) recently approved changes to ASME OM Code-1990, Subsection ISTB, Inservice Testing of Pumps in Light-Water Reactor Power Plants. The changes will be included in the 1994 addenda to ISTB. The changes, designated as the comprehensive pump test, incorporate a new, improved philosophy for testing safety-related pumps in nuclear power plants. An important philosophical difference between the open-quotes old codeclose quotes inservice testing (IST) requirements and these changes is that the changes concentrate on less frequent, more meaningful testing while minimizing damaging and uninformative low-flow testing. The comprehensive pump test change establishes a more involved biannual test for all pumps and significantly reduces the rigor of the quarterly test for standby pumps. The increased rigor and cost of the biannual comprehensive tests are offset by the reduced cost of testing and potential damage to the standby pumps, which comprise a large portion of the safety-related pumps at most plants. This paper provides background on the pump testing requirements, discusses potential industry benefits of the change, describes the development of the comprehensive pump test, and gives examples and reasons for many of the specific changes. This paper also describes additional changes to ISTB that will be included in the 1994 addenda that are associated with, but not part of, the comprehensive pump test

  3. Ecological units of the Northern Region: Subsections

    Science.gov (United States)

    John A. Nesser; Gary L. Ford; C. Lee Maynard; Debbie Dumroese

    1997-01-01

    Ecological units are described at the subsection level of the Forest Service National Hierarchical Framework of Ecological Units. A total of 91 subsections are delineated on the 1996 map "Ecological Units of the Northern Region: Subsections," based on physical and biological criteria. This document consists of descriptions of the climate, geomorphology,...

  4. Model for safety reports including descriptive examples

    International Nuclear Information System (INIS)

    1995-12-01

    Several safety reports will be produced in the process of planning and constructing the system for disposal of high-level radioactive waste in Sweden. The present report gives a model, with detailed examples, of how these reports should be organized and what steps they should include. In the near future safety reports will deal with the encapsulation plant and the repository. Later reports will treat operation of the handling systems and the repository

  5. Type studies in Coprinus subsection Lanatuli

    NARCIS (Netherlands)

    Uljé, C.B.; Noordeloos, M.E.

    2001-01-01

    As a prelude to a monograph of the genus Coprinus, types were studied of a number of species said to belong to Coprinus subsection Lanatuli (Coprinus alnivorus. C. alutaceivelatus, C. ammophilae, C. arachnoideus, C. asterophoroides, C. brunneistragulatus, C. bubalinus, C. citrinovelatus, C.

  6. Nuclear matter descriptions including quark structure of the hadrons

    International Nuclear Information System (INIS)

    Huguet, R.

    2008-07-01

    It is nowadays well established that nucleons are composite objects made of quarks and gluons, whose interactions are described by Quantum chromodynamics (QCD). However, because of the non-perturbative character of QCD at the energies of nuclear physics, a description of atomic nuclei starting from quarks and gluons is still not available. A possible alternative is to construct effective field theories based on hadronic degrees of freedom, in which the interaction is constrained by QCD. In this framework, we have constructed descriptions of infinite nuclear matter in relativistic mean field theories taking into account the quark structure of hadrons. In a first approach, the in medium modifications of mesons properties is dynamically obtained in a Nambu-Jona-Lasinio (NJL) quark model. This modification is taken into account in a relativistic mean field theory based on a meson exchange interaction between nucleons. The in-medium modification of mesons masses and the properties of infinite nuclear matter have been studied. In a second approach, the long and short range contributions to the in-medium modification of the nucleon are determined. The short range part is obtained in a NJL quark model of the nucleon. The long range part, related to pions exchanges between nucleons, has been determined in the framework of Chiral Perturbation theory. These modifications have been used to constrain the couplings of a point coupling relativistic mean field model. A realistic description of the saturation properties of nuclear matter is obtained. (author)

  7. 22 CFR 505.13 - General exemptions (Subsection (j)).

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 2 2010-04-01 2010-04-01 true General exemptions (Subsection (j)). 505.13... exemptions (Subsection (j)). (a) General exemptions are available for systems of records which are maintained by the Central Intelligence Agency (Subsection (j)(1)), or maintained by an agency which performs as...

  8. Microscopic description of production cross sections including deexcitation effects

    Science.gov (United States)

    Sekizawa, Kazuyuki

    2017-07-01

    Background: At the forefront of the nuclear science, production of new neutron-rich isotopes is continuously pursued at accelerator laboratories all over the world. To explore the currently unknown territories in the nuclear chart far away from the stability, reliable theoretical predictions are inevitable. Purpose: To provide a reliable prediction of production cross sections taking into account secondary deexcitation processes, both particle evaporation and fission, a new method called TDHF+GEMINI is proposed, which combines the microscopic time-dependent Hartree-Fock (TDHF) theory with a sophisticated statistical compound-nucleus deexcitation model, GEMINI++. Methods: Low-energy heavy ion reactions are described based on three-dimensional Skyrme-TDHF calculations. Using the particle-number projection method, production probabilities, total angular momenta, and excitation energies of primary reaction products are extracted from the TDHF wave function after collision. Production cross sections for secondary reaction products are evaluated employing GEMINI++. Results are compared with available experimental data and widely used grazing calculations. Results: The method is applied to describe cross sections for multinucleon transfer processes in 40Ca+124Sn (Ec .m .≃128.54 MeV ), 48Ca+124Sn (Ec .m .≃125.44 MeV ), 40Ca+208Pb (Ec .m .≃208.84 MeV ), 58Ni+208Pb (Ec .m .≃256.79 MeV ), 64Ni+238U (Ec .m .≃307.35 MeV ), and 136Xe+198Pt (Ec .m .≃644.98 MeV ) reactions at energies close to the Coulomb barrier. It is shown that the inclusion of secondary deexcitation processes, which are dominated by neutron evaporation in the present systems, substantially improves agreement with the experimental data. The magnitude of the evaporation effects is very similar to the one observed in grazing calculations. TDHF+GEMINI provides better description of the absolute value of the cross sections for channels involving transfer of more than one proton, compared to the grazing

  9. The taxonomy of the European species of Hebeloma section Denudata subsections Hiemalia, Echinospora subsect. nov. and Clepsydroida subsect. nov. and five new species

    DEFF Research Database (Denmark)

    Eberhardt, Ursula; Beker, Henry J.; Vesterholt, Jan Hansen

    2016-01-01

    Hebeloma section Denudata includes the majority of the taxa commonly referred to as the Hebeloma crustuliniforme complex. In a recent paper we described in detail H. subsection Denudata and fifteen European species recognised within this subsection, using morphological and molecular methods. In t...

  10. Needle Terpenes as Chemotaxonomic Markers in Pinus: Subsections Pinus and Pinaster.

    Science.gov (United States)

    Mitić, Zorica S; Jovanović, Snežana Č; Zlatković, Bojan K; Nikolić, Biljana M; Stojanović, Gordana S; Marin, Petar D

    2017-05-01

    Chemical compositions of needle essential oils of 27 taxa from the section Pinus, including 20 and 7 taxa of the subsections Pinus and Pinaster, respectively, were compared in order to determine chemotaxonomic significance of terpenes at infrageneric level. According to analysis of variance, six out of 31 studied terpene characters were characterized by a high level of significance, indicating statistically significant difference between the examined subsections. Agglomerative hierarchical cluster analysis has shown separation of eight groups, where representatives of subsect. Pinaster were distributed within the first seven groups on the dendrogram together with P. nigra subsp. laricio and P. merkusii from the subsect. Pinus. On the other hand, the eighth group included the majority of the members of subsect. Pinus. Our findings, based on terpene characters, complement those obtained from morphological, biochemical, and molecular parameters studied over the past two decades. In addition, results presented in this article confirmed that terpenes are good markers at infrageneric level. © 2017 Wiley-VHCA AG, Zurich, Switzerland.

  11. Studies in Coprinus IV — Coprinus section coprinus. Subdivision and revision of subsection Alachuani

    NARCIS (Netherlands)

    Uljé, C.B.; Noordeloos, M.E.

    1997-01-01

    Coprinus section Coprinus is defined and delimited to comprise four subsections: Atramentarii, Coprinus, Lanatuli and Alachuani. A key to the subsections is given as well as a key to the species of subsection Alachuani known from the Netherlands or to be expected in the Netherlands on account of

  12. Representation-free description of light-pulse atom interferometry including non-inertial effects

    Energy Technology Data Exchange (ETDEWEB)

    Kleinert, Stephan, E-mail: stephan.kleinert@uni-ulm.de [Institut für Quantenphysik and Center for Integrated Quantum Science and Technology (IQST), Universität Ulm, Albert-Einstein-Allee 11, D-89081 Ulm (Germany); Kajari, Endre; Roura, Albert [Institut für Quantenphysik and Center for Integrated Quantum Science and Technology (IQST), Universität Ulm, Albert-Einstein-Allee 11, D-89081 Ulm (Germany); Schleich, Wolfgang P. [Institut für Quantenphysik and Center for Integrated Quantum Science and Technology (IQST), Universität Ulm, Albert-Einstein-Allee 11, D-89081 Ulm (Germany); Texas A& M University Institute for Advanced Study (TIAS), Institute for Quantum Science and Engineering (IQSE) and Department of Physics and Astronomy, Texas A& M University College Station, TX 77843-4242 (United States)

    2015-12-30

    Light-pulse atom interferometers rely on the wave nature of matter and its manipulation with coherent laser pulses. They are used for precise gravimetry and inertial sensing as well as for accurate measurements of fundamental constants. Reaching higher precision requires longer interferometer times which are naturally encountered in microgravity environments such as drop-tower facilities, sounding rockets and dedicated satellite missions aiming at fundamental quantum physics in space. In all those cases, it is necessary to consider arbitrary trajectories and varying orientations of the interferometer set-up in non-inertial frames of reference. Here we provide a versatile representation-free description of atom interferometry entirely based on operator algebra to address this general situation. We show how to analytically determine the phase shift as well as the visibility of interferometers with an arbitrary number of pulses including the effects of local gravitational accelerations, gravity gradients, the rotation of the lasers and non-inertial frames of reference. Our method conveniently unifies previous results and facilitates the investigation of novel interferometer geometries.

  13. Utility experience in code updating of equipment built to 1974 code, Section 3, Subsection NF

    International Nuclear Information System (INIS)

    Rao, K.R.; Deshpande, N.

    1990-01-01

    This paper addresses changes to ASME Code Subsection NF and reconciles the differences between the updated codes and the as built construction code, of ASME Section III, 1974 to which several nuclear plants have been built. Since Section III is revised every three years and replacement parts complying with the construction code are invariably not available from the plant stock inventory, parts must be procured from vendors who comply with the requirements of the latest codes. Aspects of the ASME code which reflect Subsection NF are identified and compared with the later Code editions and addenda, especially up to and including the 1974 ASME code used as the basis for the plant qualification. The concern of the regulatory agencies is that if later code allowables and provisions are adopted it is possible to reduce the safety margins of the construction code. Areas of concern are highlighted and the specific changes of later codes are discerned; adoption of which, would not sacrifice the intended safety margins of the codes to which plants are licensed

  14. A new kinetic description for turbulent collisions including mode-coupling

    International Nuclear Information System (INIS)

    Misguich, J.H.; Tchen, C.M.

    1982-07-01

    The usual introduction of higher-order mode-coupling terms in the description of turbulent collisions beyond usual Renormalized Quasi-Linear approximation (RQL) is briefly analyzed. Here new results are derived in the framework of the general kinetic theory, and the equivalence is proved with the long time limit of simple results deduced from the Vlasov equation. The correction to the RQL turbulent collision term is analyzed and a new approximation is proposed. Turbulent collisions are also described by perturbation around the Lagrangian autocorrelation of fluctuating fields. For an homogeneous turbulence, however, the asymptotic integral of this Lagrangian autocorrelation vanishes identically, similarly to what occurs in Brownian motion. For inhomogeneous turbulence this method can nevertheless be used, and higher-order mode-coupling terms can be interpreted as a shielding of elementary Lagrangian turbulent collisions

  15. Studies in Coprinus V — Coprinus section Coprinus. Revision of subsection Lanatuli Sing

    NARCIS (Netherlands)

    Uljé, C.B.; Noordeloos, M.E.

    1999-01-01

    A key is given to the species of subsection Lanatuli known from the Netherlands or to be expected in the Netherlands on account of records from neighbouring countries. For a key to the subsections in Coprinus section Coprinus see Uljé & Noordel., Persoonia 16 (1997) 267. Coprinus bicornis and C.

  16. Microscopic description of rotational spectra including band-mixing. 1. Formulation in a microscopic basis

    International Nuclear Information System (INIS)

    Brut, F.; Jang, S.

    1982-05-01

    Within the framework of the projection theory of collective motion, a microscopic description of the rotational energy with band-mixing is formulated using a method based on an inverse power perturbation expansion in a quantity related to the expectation value of the operator Jsub(y)sup(2). The reliability of the present formulation is discussed in relation to the difference between the individual wave functions obtained from the variational equations which are established before and after projection. In addition to the various familiar quantities which appear in the phenomenological energy formula, such as the moment of inertia parameter, the decoupling factor and the band-mixing matrix element for ΔK=1, other unfamiliar quantities having the factors with peculiar phases, (-1)sup(J+1)J(J+1), (-1)sup(J+3/2)(J-1/2)(J+1/2)(J+3/2), (-1)sup(J+1/2)(J+1/2)J(J+1), (-1)sup(J)J(J+1)(J-1)(J+2) and [J(J+1)] 2 are obtained. The band-mixing term for ΔK=2 is also new. All these quantities are expressed in terms of two-body interactions and expectation values of the operator Jsub(y)sup(m), where m is an integer, within the framework of particle-hole formalism. The difference between the moment of inertia of an even-even and a neighboring even-odd nucleus, as well as the effect of band-mixing on the moment of inertia are studied. All results are put into the forms so as to facilitate comparisons with the corresponding phenomenological terms and also for further application

  17. Model for safety reports including descriptive examples; Mall foer saekerhetsrapporter med beskrivande exempel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    Several safety reports will be produced in the process of planning and constructing the system for disposal of high-level radioactive waste in Sweden. The present report gives a model, with detailed examples, of how these reports should be organized and what steps they should include. In the near future safety reports will deal with the encapsulation plant and the repository. Later reports will treat operation of the handling systems and the repository.

  18. Description of an oral Chagas disease outbreak in Venezuela, including a vertically transmitted case.

    Science.gov (United States)

    Noya, Belkisyolé Alarcón de; Pérez-Chacón, Gladymar; Díaz-Bello, Zoraida; Dickson, Sonia; Muñoz-Calderón, Arturo; Hernández, Carlos; Pérez, Yadira; Mauriello, Luciano; Moronta, Eyleen

    2017-08-01

    We describe the eleventh major outbreak of foodborne Trypanosoma cruzi transmission in urban Venezuela, including evidence for vertical transmission from the index case to her fetus. After confirming fetal death at 24 weeks of gestation, pregnancy interruption was performed. On direct examination of the amniotic fluid, trypomastigotes were detected. T. cruzi specific-polymerase chain reaction (PCR) also proved positive when examining autopsied fetal organs. Finally, microscopic fetal heart examination revealed amastigote nests. Acute orally transmitted Chagas disease can be life threatening or even fatal for pregnant women and unborn fetuses owing to vertical transmission. There is therefore an urgent need to improve national epidemiologic control measures.

  19. Taxonomic revision of the tropical African group of Carex subsect. Elatae (sect. Spirostachyae, Cyperaceae

    Directory of Open Access Journals (Sweden)

    Escudero, Marcial

    2011-12-01

    Full Text Available The tropical African monophyletic group of Carex subsect. Elatae (sect. Spirostachyae is distributed in continental tropical Africa, Madagascar, the Mascarene archipelago, and Bioko Island (32 km off the coast of West Africa, in the Gulf of Guinea. The first monographic treatment of this Carex group, as well as of the tribe Cariceae, was published by Kükenthal (as sect. Elatae Kük.. Recently, the first molecular (nrDNA, cpDNA phylogeny of Carex sect. Elatae has been published, which also included the species of sect. Spirostachyae. In the resulting consensus trees, most species of sect. Elatae were embedded within core Spirostachyae and so this section was joined with sect. Spirostachyae as subsect. Elatae. Within subsect. Elatae, several groups were described, one of which was termed the “tropical African group”. Here we present a taxonomic revision of this group, based on more than 280 vouchers from 29 herbaria as well as in field trips in Tropical Africa. In the revision, we recognise 12 species (16 taxa within the tropical African group, and so have somewhat modified our previous view, in which 10 species, 12 taxa were listed. One new species from Tanzania is included in this treatment, C. uluguruensis Luceño & M. Escudero. Several combinations are made, C. cyrtosaccus is treated as a synonym of C. vallis-rosetto and, finally, the binomial C. greenwayi has been recognised.Las especies de la subsección Elatae (sección Spirostachyae del género Carex que se distribuyen por África tropical continental, Madagascar, el archipiélago de las Mascareñas y la isla de Bioko (a 32 km del litoral de África occidental, en el golfo de Guinea forman un grupo monofilético. El primer tratamiento taxonómico de este grupo de cárices, así como de la tribu Cariceae en su conjunto, fue elaborado por Kükenthal (sección Elatae Kük.; recientemente, se ha publicado el primer estudio de filogenia molecular (nrDNA, cpDNA de los táxones de este grupo

  20. A Coupled Model for Work Roll Thermal Contour with Subsectional Cooling in Aluminum Strip Cold Rolling

    Directory of Open Access Journals (Sweden)

    Shao Jian

    2014-10-01

    Full Text Available Little attention had been given to the evaluation of subsectional cooling control ability under complicated working conditions. In this paper, heat generation was calculated by using finite difference method. Strip hardening, work roll elastic deformation and elastic recovery of strip were taken into account. The mean coefficient of convective heat transfer on work roll surface was simulated by FLUENT. Calculation model had used the alternative finite difference scheme, which improved the model stability and computing speed. The simulation result shows that subsectional cooling control ability is different between different rolling passes. Positive and negative control abilities are roughly the same in the same pass. The increase of rolled length, working pressure of header and friction coefficient has positive effect on subsectional cooling control ability, and the rolling speed is on the contrary. On the beginning of the pass, when work roll surface has not reached the stable temperature, control ability of subsectional cooling is mainly affected by rolled length. The effect of mean coefficient of convective heat transfer and coefficient of friction is linear. When rolling speed is over 500 m/min, control ability of subsectional cooling becomes stable.

  1. A study on technical issues of materials and design bases in ASME section III subsection NH code

    International Nuclear Information System (INIS)

    Lee, Hyeong Yeon; Kim, Jong Bum; Yoo, Bong

    2000-12-01

    In this study, an analysis of evaluation report by ORNL on the technical issues of elevated temperatures design guide line, ASME Code Section III Subsection NH was conducted and a brief evaluation procedure of the creep-fatigue damage was presented. ORNL published the report in 1993 and reviewed the issue areas where code rules or regulatory guides may be lacking or inadequate to ensure safe operation over the expected life cycles for liquid metal reactor systems. From historical viewpoint of the ASME NH code development, ASME Code Case 47 was changed much in 1989 edition, which includes the stress relaxation behavior in creep damage evaluation. Afterwards the 1992 version of CC N-47 was upgraded to Subsection NH in 1995 edition, which is the same with that of CC N-47 1992 edition except few material data. This report brings up the technical and regulatory issues that can not guarantee the safe and reliable operation of the ALMR which got the conceptual design certification from NRC. Twenty three technical issues were raised and settlement methodology were proposed. Additionally, the status of items approved by ASME code subgroup of elevated temperature design committee for the revision of the most recent 1998 edition of ASME NH was described

  2. 29 CFR 71.52 - Specific exemptions pursuant to subsection (k)(5) of the Privacy Act.

    Science.gov (United States)

    2010-07-01

    ... (Investigative Case Tracking Systems/Audit Information Reporting Systems, USDOL/OIG), a system of records... AND ACCESS TO RECORDS UNDER THE PRIVACY ACT OF 1974 Exemption of Records Systems Under the Privacy Act § 71.52 Specific exemptions pursuant to subsection (k)(5) of the Privacy Act. (a) The following systems...

  3. 29 CFR 71.51 - Specific exemptions pursuant to subsection (k)(2) of the Privacy Act.

    Science.gov (United States)

    2010-07-01

    ... (Investigative Case Tracking Systems/Audit Information Reporting Systems, USDOL/OIG), a system of records... AND ACCESS TO RECORDS UNDER THE PRIVACY ACT OF 1974 Exemption of Records Systems Under the Privacy Act § 71.51 Specific exemptions pursuant to subsection (k)(2) of the Privacy Act. (a) The following systems...

  4. 29 CFR 71.50 - General exemptions pursuant to subsection (j) of the Privacy Act.

    Science.gov (United States)

    2010-07-01

    ... (Investigative Case Tracking Systems/Audit Information Reporting Systems, USDOL/OIG), a system of records... ACCESS TO RECORDS UNDER THE PRIVACY ACT OF 1974 Exemption of Records Systems Under the Privacy Act § 71.50 General exemptions pursuant to subsection (j) of the Privacy Act. (a) The following systems of...

  5. Team-Based Learning in a Subsection of a Veterinary Course as Compared to Standard Lectures

    Science.gov (United States)

    Malone, Erin; Spieth, Amie

    2012-01-01

    Team-Based Learning (TBL) maximizes class time for student practice in complex problems using peer learning in an instructor-guided format. Generally entire courses are structured using the comprehensive guidelines of TBL. We used TBL in a subsection of a veterinary course to determine if it remained effective in this format. One section of the…

  6. Method and structure for cache aware transposition via rectangular subsections

    Science.gov (United States)

    Gustavson, Fred Gehrung; Gunnels, John A

    2014-02-04

    A method and structure for transposing a rectangular matrix A in a computer includes subdividing the rectangular matrix A into one or more square submatrices and executing an in-place transposition for each of the square submatrices A.sub.ij.

  7. The complete nucleotide sequences of the five genetically distinct plastid genomes of Oenothera, subsection Oenothera: I. sequence evaluation and plastome evolution.

    Science.gov (United States)

    Greiner, Stephan; Wang, Xi; Rauwolf, Uwe; Silber, Martina V; Mayer, Klaus; Meurer, Jörg; Haberer, Georg; Herrmann, Reinhold G

    2008-04-01

    The flowering plant genus Oenothera is uniquely suited for studying molecular mechanisms of speciation. It assembles an intriguing combination of genetic features, including permanent translocation heterozygosity, biparental transmission of plastids, and a general interfertility of well-defined species. This allows an exchange of plastids and nuclei between species often resulting in plastome-genome incompatibility. For evaluation of its molecular determinants we present the complete nucleotide sequences of the five basic, genetically distinguishable plastid chromosomes of subsection Oenothera (=Euoenothera) of the genus, which are associated in distinct combinations with six basic genomes. Sizes of the chromosomes range from 163 365 bp (plastome IV) to 165 728 bp (plastome I), display between 96.3% and 98.6% sequence similarity and encode a total of 113 unique genes. Plastome diversification is caused by an abundance of nucleotide substitutions, small insertions, deletions and repetitions. The five plastomes deviate from the general ancestral design of plastid chromosomes of vascular plants by a subsection-specific 56 kb inversion within the large single-copy segment. This inversion disrupted operon structures and predates the divergence of the subsection presumably 1 My ago. Phylogenetic relationships suggest plastomes I-III in one clade, while plastome IV appears to be closest to the common ancestor.

  8. The complete nucleotide sequences of the five genetically distinct plastid genomes of Oenothera, subsection Oenothera: I. Sequence evaluation and plastome evolution†

    Science.gov (United States)

    Greiner, Stephan; Wang, Xi; Rauwolf, Uwe; Silber, Martina V.; Mayer, Klaus; Meurer, Jörg; Haberer, Georg; Herrmann, Reinhold G.

    2008-01-01

    The flowering plant genus Oenothera is uniquely suited for studying molecular mechanisms of speciation. It assembles an intriguing combination of genetic features, including permanent translocation heterozygosity, biparental transmission of plastids, and a general interfertility of well-defined species. This allows an exchange of plastids and nuclei between species often resulting in plastome–genome incompatibility. For evaluation of its molecular determinants we present the complete nucleotide sequences of the five basic, genetically distinguishable plastid chromosomes of subsection Oenothera (=Euoenothera) of the genus, which are associated in distinct combinations with six basic genomes. Sizes of the chromosomes range from 163 365 bp (plastome IV) to 165 728 bp (plastome I), display between 96.3% and 98.6% sequence similarity and encode a total of 113 unique genes. Plastome diversification is caused by an abundance of nucleotide substitutions, small insertions, deletions and repetitions. The five plastomes deviate from the general ancestral design of plastid chromosomes of vascular plants by a subsection-specific 56 kb inversion within the large single-copy segment. This inversion disrupted operon structures and predates the divergence of the subsection presumably 1 My ago. Phylogenetic relationships suggest plastomes I–III in one clade, while plastome IV appears to be closest to the common ancestor. PMID:18299283

  9. Report on the FY17 Development of Computer Program for ASME Section III, Division 5, Subsection HB, Subpart B Rules

    Energy Technology Data Exchange (ETDEWEB)

    Swindeman, M. J. [Argonne National Lab. (ANL), Argonne, IL (United States); Jetter, R. I. [Argonne National Lab. (ANL), Argonne, IL (United States); Sham, T. -L. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2017-01-01

    One of the objectives of the high temperature design methodology activities is to develop and validate both improvements and the basic features of ASME Boiler and Pressure Vessel Code, Section III, Rules for Construction of Nuclear Facility Components, Division 5, High Temperature Reactors, Subsection HB, Subpart B (HBB). The overall scope of this task is to develop a computer program to aid assessment procedures of components under specified loading conditions in accordance with the elevated temperature design requirements for Division 5 Class A components. There are many features and alternative paths of varying complexity in HBB. The initial focus of this computer program is a basic path through the various options for a single reference material, 316H stainless steel. However, the computer program is being structured for eventual incorporation all of the features and permitted materials of HBB. This report will first provide a description of the overall computer program, particular challenges in developing numerical procedures for the assessment, and an overall approach to computer program development. This is followed by a more comprehensive appendix, which is the draft computer program manual for the program development. The strain limits rules have been implemented in the computer program. The evaluation of creep-fatigue damage will be implemented in future work scope.

  10. Update and Improve Subsection NH - Alternative Simplified Creep-Fatigue Design Methods

    International Nuclear Information System (INIS)

    Asayama, Tai

    2009-01-01

    This report described the results of investigation on Task 10 of DOE/ASME Materials NGNP/Generation IV Project based on a contract between ASME Standards Technology, LLC (ASME ST-LLC) and Japan Atomic Energy Agency (JAEA). Task 10 is to Update and Improve Subsection NH -- Alternative Simplified Creep-Fatigue Design Methods. Five newly proposed promising creep-fatigue evaluation methods were investigated. Those are (1) modified ductility exhaustion method, (2) strain range separation method, (3) approach for pressure vessel application, (4) hybrid method of time fraction and ductility exhaustion, and (5) simplified model test approach. The outlines of those methods are presented first, and predictability of experimental results of these methods is demonstrated using the creep-fatigue data collected in previous Tasks 3 and 5. All the methods (except the simplified model test approach which is not ready for application) predicted experimental results fairly accurately. On the other hand, predicted creep-fatigue life in long-term regions showed considerable differences among the methodologies. These differences come from the concepts each method is based on. All the new methods investigated in this report have advantages over the currently employed time fraction rule and offer technical insights that should be thought much of in the improvement of creep-fatigue evaluation procedures. The main points of the modified ductility exhaustion method, the strain range separation method, the approach for pressure vessel application and the hybrid method can be reflected in the improvement of the current time fraction rule. The simplified mode test approach would offer a whole new advantage including robustness and simplicity which are definitely attractive but this approach is yet to be validated for implementation at this point. Therefore, this report recommends the following two steps as a course of improvement of NH based on newly proposed creep-fatigue evaluation

  11. New description of gradual substitution of graft by bone tissue including biomechanical and structural effects, nutrients supply and consumption

    Science.gov (United States)

    Lu, Yanfei; Lekszycki, Tomasz

    2018-03-01

    A new description of graft substitution by bone tissue is proposed in this work. The studied domain is considered as a continuum model consisting of a mixture of the bone tissue and the graft material. Densities of both components evolve in time as a result of cellular activity and biodegradation. The proposed model focuses on the interaction between the bone cell activity, mechanical stimuli, nutrients supply and scaffold microstructure. Different combinations of degradation rate and stiffness of the graft material were examined by numerical simulation. It follows from the calculations that the degradation rate of the scaffold should be tuned to the synthesis/resorption rate of the tissue, which are dependent among the others on scaffold porosity changes. Simulation results imply potential criteria to choose proper bone substitute material in consideration of degradation rate, initial porosity and mechanical characteristics.

  12. TD-S-HF single determinantal reaction theory and the description of many-body processes, including fission

    International Nuclear Information System (INIS)

    Griffin, J.J.; Lichtner, P.C.; Dworzecka, M.; Kan, K.K.

    1979-01-01

    The restrictions implied for the time dependent many-body reaction theory by the (TDHF) single determinantal assumption are explored by constructive analysis. A restructured TD-S-HF reaction theory is modelled, not after the initial-value form of the Schroedinger reaction theory, but after the (fully equivalent) S-matrix form, under the conditions that only self-consistent TDHF solutions occur in the theory, every wave function obeys the fundamental statistical interpretation of quantum mechanics, and the theory reduces to the exact Schroedinger theory for exact solutions which are single determinantal. All of these conditions can be accomodated provided that the theory is interpreted on a time-averaged basis, i.e., physical constants of the Schroedinger theory which are time-dependent in the TDHF theory, are interpreted in TD-S-HF in terms of their time averaged values. The resulting reaction theory, although formulated heuristically, prescribes a well defined and unambiguous calculational program which, although somewhat more demanding technically than the conventional initial-value TDHF method, is nevertheless more consonant with first principles, structurally and mechanistically. For its physical predictions do not depend upon the precise location of the distant measuring apparatus, and are in no way influenced by the spurious cross channel correlations which arise whenever the description of many reaction channels is imposed upon one single-determinantal solution. For nuclear structure physics, the TDHF-eigenfunctions provide the first plausible description of exact eigenstates in the time-dependent framework; moreover, they are unencumbered by any restriction to small amplitudes. 14 references

  13. A simple device for subsectioning aqueous sediments from the box or spade corer

    Digital Repository Service at National Institute of Oceanography (India)

    Valsangkar, A.B.

    , combination of any sub-section interval is possible; however, the care to be taken in selecting the appropriate size rings. Results and discussion The proposed apparatus/device has been successfully tested and used5 for the first time during 38th... PVC liners (12.5 cm OD, and 50 cm length), and 2 PVC liners (10 cm OD and 50 cm length) (Figure 1). The sub-cores were carefully removed from the box by inserting a PVC disk at the bottom. The sub-core was then placed on the top of the device...

  14. A Descriptive Study on the Neonatal Morbidity Profile of Autism Spectrum Disorders, Including a Comparison with Other Neurodevelopmental Disorders

    Science.gov (United States)

    Atladóttir, H. Ó.; Schendel, D. E.; Parner, E. T.; Henriksen, T. B.

    2015-01-01

    The aim of this study was to describe the profile of specific neonatal morbidities in children later diagnosed with autism spectrum disorder (ASD), and to compare this profile with the profile of children with hyperkinetic disorder, cerebral palsy, epilepsy or intellectual disability. This is a Danish population based cohort study, including all…

  15. Description of a multifaceted rehabilitation program including overground gait training for a child with cerebral palsy: A case report.

    Science.gov (United States)

    Farrell, Elizabeth; Naber, Erin; Geigle, Paula

    2010-01-01

    This case describes the outcomes of a multifaceted rehabilitation program including body weight-supported overground gait training (BWSOGT) in a nonambulatory child with cerebral palsy (CP) and the impact of this treatment on the child's functional mobility. The patient is a nonambulatory 10-year-old female with CP who during an inpatient rehabilitation stay participated in direct, physical therapy 6 days per week for 5 weeks. Physical therapy interventions included stretching of her bilateral lower extremities, transfer training, bed mobility training, balance training, kinesiotaping, supported standing in a prone stander, two trials of partial weight-supported treadmill training, and for 4 weeks, three to five times per week, engaged in 30 minutes of BWSOGT using the Up n' go gait trainer, Lite Gait Walkable, and Rifton Pacer gait trainer. Following the multifaceted rehabilitation program, the patient demonstrated increased step initiation, increased weight bearing through bilateral lower extremities, improved bed mobility, and increased participation in transfers. The child's Gross Motor Functional Measure (GMFM) scores increased across four dimensions and her Physical Abilities and Mobility Scale (PAMS) increased significantly. This case report illustrates that a multifaceted rehabilitation program including BWSOGT was an effective intervention strategy to improve functional mobility in this nonambulatory child with CP.

  16. Understanding morphological variability in a taxonomic context in Chilean diplomystids (Teleostei: Siluriformes, including the description of a new species

    Directory of Open Access Journals (Sweden)

    Gloria Arratia

    2017-02-01

    Full Text Available Following study of the external morphology and its unmatched variability throughout ontogeny and a re-examination of selected morphological characters based on many specimens of diplomystids from Central and South Chile, we revised and emended previous specific diagnoses and consider Diplomystes chilensis, D. nahuelbutaensis, D. camposensis, and Olivaichthys viedmensis (Baker River to be valid species. Another group, previously identified as Diplomystes sp., D. spec., D. aff. chilensis, and D. cf. chilensis inhabiting rivers between Rapel and Itata Basins is given a new specific name (Diplomystes incognitus and is diagnosed. An identification key to the Chilean species, including the new species, is presented. All specific diagnoses are based on external morphological characters, such as aspects of the skin, neuromast lines, and main lateral line, and position of the anus and urogenital pore, as well as certain osteological characters to facilitate the identification of these species that previously was based on many internal characters. Diplomystids below 150 mm standard length (SL share a similar external morphology and body proportions that make identification difficult; however, specimens over 150 mm SL can be diagnosed by the position of the urogenital pore and anus, and a combination of external and internal morphological characters. According to current knowledge, diplomystid species have an allopatric distribution with each species apparently endemic to particular basins in continental Chile and one species (O. viedmensis known only from one river in the Chilean Patagonia, but distributed extensively in southern Argentina.

  17. Trophic interactions and distribution of some Squaliforme sharks, including new diet descriptions for Deania calcea and Squalus acanthias.

    Directory of Open Access Journals (Sweden)

    Matthew R Dunn

    Full Text Available Squaliforme sharks are a common but relatively vulnerable bycatch in many deep water fisheries. Eleven species of squaliforme shark are commonly caught at depths of 200-1200 m on Chatham Rise, New Zealand, and their diversity suggests they might occupy different niches. The diets of 133 Deania calcea and 295 Squalus acanthias were determined from examination of stomach contents. The diet of D. calcea was characterised by mesopelagic fishes, and S. acanthias by benthic to pelagic fishes, but was more adaptive and included likely scavenging. Multivariate analyses found the most important predictors of diet variability in S. acanthias were year, bottom temperature, longitude, and fish weight. The diet of the nine other commonly caught squaliforme sharks was reviewed, and the spatial and depth distribution of all species on Chatham Rise described from research bottom trawl survey catches. The eleven species had a variety of different diets, and depth and location preferences, consistent with niche separation to reduce interspecific competition. Four trophic groups were identified, characterised by: mesopelagic fishes and invertebrates (Centroselachus crepidater, D. calcea, and Etmopterus lucifer; mesopelagic and benthopelagic fishes and invertebrates (Centroscymnus owstoni, Etmopterus baxteri; demersal and benthic fishes (Centrophorus squamosus, Dalatias licha, Proscymnodon plunketi; and a generalist diet of fishes and invertebrates (S. acanthias. The trophic levels of the species in each of the four groups were estimated as 4.18-4.24, 4.20-4.23, 4.24-4.48, and 3.84 respectively. The diet of Oxynotus bruniensis and Squalus griffini are unknown. The different niches occupied by different species are likely to influence their vulnerability to bottom trawl fisheries. Some species may benefit from fisheries through an increased availability of scavenged prey.

  18. Trophic interactions and distribution of some Squaliforme sharks, including new diet descriptions for Deania calcea and Squalus acanthias.

    Science.gov (United States)

    Dunn, Matthew R; Stevens, Darren W; Forman, Jeffrey S; Connell, Amelia

    2013-01-01

    Squaliforme sharks are a common but relatively vulnerable bycatch in many deep water fisheries. Eleven species of squaliforme shark are commonly caught at depths of 200-1200 m on Chatham Rise, New Zealand, and their diversity suggests they might occupy different niches. The diets of 133 Deania calcea and 295 Squalus acanthias were determined from examination of stomach contents. The diet of D. calcea was characterised by mesopelagic fishes, and S. acanthias by benthic to pelagic fishes, but was more adaptive and included likely scavenging. Multivariate analyses found the most important predictors of diet variability in S. acanthias were year, bottom temperature, longitude, and fish weight. The diet of the nine other commonly caught squaliforme sharks was reviewed, and the spatial and depth distribution of all species on Chatham Rise described from research bottom trawl survey catches. The eleven species had a variety of different diets, and depth and location preferences, consistent with niche separation to reduce interspecific competition. Four trophic groups were identified, characterised by: mesopelagic fishes and invertebrates (Centroselachus crepidater, D. calcea, and Etmopterus lucifer); mesopelagic and benthopelagic fishes and invertebrates (Centroscymnus owstoni, Etmopterus baxteri); demersal and benthic fishes (Centrophorus squamosus, Dalatias licha, Proscymnodon plunketi); and a generalist diet of fishes and invertebrates (S. acanthias). The trophic levels of the species in each of the four groups were estimated as 4.18-4.24, 4.20-4.23, 4.24-4.48, and 3.84 respectively. The diet of Oxynotus bruniensis and Squalus griffini are unknown. The different niches occupied by different species are likely to influence their vulnerability to bottom trawl fisheries. Some species may benefit from fisheries through an increased availability of scavenged prey.

  19. Emended description of Campylobacter sputorum and revision of its infrasubspecific (biovar) divisions, including C-sputorum biovar paraureolyticus, a urease-producing variant from cattle and humans

    DEFF Research Database (Denmark)

    On, S.L.W.; Atabay, H.I.; Corry, J.E.L.

    1998-01-01

    A polyphasic taxonomic study of 15 bovine and human strains assigned to the catalase-negative, urease-positive campylobacter (CNUPC) group identified these bacteria as a novel, ureolytic biovar of Campylobacter sputorum for which we propose the name C. sputorum bv. paraureolyticus: suitable...... should be revised to include by. sputorum for catalase-negative strains; by. fecalis for catalase-positive strains; and by. paraureolyticus for urease-positive strains. Strains classified previously as by. bubulus should be reclassified as by. sputorum. The species description of C. sputorum is revised...

  20. Nevada Test Site Environmental Report 2008 Attachment A: Site Description

    Energy Technology Data Exchange (ETDEWEB)

    Cathy A. Wills

    2009-09-01

    This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2008 (National Security Technologies, LLC [NSTec], 2009a). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  1. Nevada Test Site Environmental Report 2007 Attachment A: Site Description

    Energy Technology Data Exchange (ETDEWEB)

    Cathy Wills

    2008-09-01

    This appendix expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2007 (U.S. Department of Energy [DOE], 2008). Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  2. Nevada Test Site Environmental Report 2005, Attachment A - Site Description

    International Nuclear Information System (INIS)

    Cathy A. Wills

    2006-01-01

    This appendix to the ''Nevada Test Site Environmental Report 2005'', dated October 2006 (DOE/NV/11718--1214; DOE/NV/25946--007) expands on the general description of the Nevada Test Site (NTS) presented in the Introduction. Included are subsections that summarize the site?s geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This appendix complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report

  3. Nevada Test Site Environmental Report 2009, Attachment A: Site Description

    Energy Technology Data Exchange (ETDEWEB)

    Cathy Wills, ed.

    2010-09-13

    This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2009. Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  4. Nevada Test Site Environmental Report 2005, Attachment A - Site Description

    Energy Technology Data Exchange (ETDEWEB)

    Cathy A. Wills

    2006-10-01

    This appendix to the ''Nevada Test Site Environmental Report 2005'', dated October 2006 (DOE/NV/11718--1214; DOE/NV/25946--007) expands on the general description of the Nevada Test Site (NTS) presented in the Introduction. Included are subsections that summarize the site?s geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This appendix complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  5. Karyotype characterization of Mugil incilis Hancock, 1830 (Mugiliformes: Mugilidae, including a description of an unusual co-localization of major and minor ribosomal genes in the family

    Directory of Open Access Journals (Sweden)

    Anne Kathrin Hett

    Full Text Available This study reports the description of the karyotype of Mugil incilis from Venezuela. The chromosome complement is composed of 48 acrocentric chromosomes, which uniformly decrease in size. Therefore, the homologues can not be clearly identified, with the exception of one of the largest chromosome pairs, classified as number 1, whose homologues may show a subcentromeric secondary constriction, and of chromosome pair number 24, which is considerably smaller than the others. C-banding showed heterochromatic blocks at the centromeric/pericentromeric regions of all chromosomes, which were more conspicuous on chromosomes 1, given the C-positive signals include the secondary constrictions. AgNO3 and fluorescent in situ hybridization (FISH with 45S rDNA demonstrated that the nucleolus organizer regions are indeed located on the secondary constrictions of chromosome pair number 1. FISH with 5S rDNA revealed that the minor ribosomal genes are located on this same chromosome pair, near the NORs, though signals are closer to the centromeres and of smaller size, compared to those of the major ribosomal gene clusters. This is the first description of co-localization of major and minor ribosomal genes in the family. Data are discussed from a cytotaxonomic and phylogenetic perspective.

  6. Comparison of elevated temperature design codes of ASME Subsection NH and RCC-MRx

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hyeong-Yeon, E-mail: hylee@kaeri.re.kr

    2016-11-15

    Highlights: • Comparison of elevated temperature design (ETD) codes was made. • Material properties and evaluation procedures were compared. • Two heat-resistant materials of Grade 91 steel and austenitic stainless steel 316 are the target materials in the present study. • Application of the ETD codes to Generation IV reactor components and a comparison of the conservatism was conducted. - Abstract: The elevated temperature design (ETD) codes are used for the design evaluation of Generation IV (Gen IV) reactor systems such as sodium-cooled fast reactor (SFR), lead-cooled fast reactor (LFR), and very high temperature reactor (VHTR). In the present study, ETD code comparisons were made in terms of the material properties and design evaluation procedures for the recent versions of the two major ETD codes, ASME Section III Subsection NH and RCC-MRx. Conservatism in the design evaluation procedures was quantified and compared based on the evaluation results for SFR components as per the two ETD codes. The target materials are austenitic stainless steel 316 and Mod.9Cr-1Mo steel, which are the major two materials in a Gen IV SFR. The differences in the design evaluation procedures as well as the material properties in the two ETD codes are highlighted.

  7. Euphorbia L. subsect. Esula (Boiss. in DC. Pax in the Iberian Peninsula. Leaf surface, chromosome numbers and taxonomic treatment

    Directory of Open Access Journals (Sweden)

    Molero, Julià

    1992-12-01

    differentiation.
    Our final taxonomic treatment aims to achieve coherence with the result of the study of the leaf surface and the micromorphology of the seeds, taking into account those characters that are of use. In this section we include aspects related to nomenclature and typification, descriptive characters, keys, ecology and geographical distribution. We describe a new taxon: E. nevadensis Boiss. & Reuter subsp. bolosii Molero & Rovira; we establish the new combination E. esula L. subsp. orientalis (Boiss. in DC. Molera & Rovira. E. sennenii Pau is considered a synonym of E. nevadensis Boiss. & Reuter subsp. aragonensis (Loscos & Pardo Bolòs & Vigo.

    Presentem l’estudi taxonòmic dels representants d'Euphorbia subsect. Esula a la Península Ibèrica. Prèviament, s'inclou un primer capítol dedicat a l'estudi de les epidermis foliars i un segon capítol sobre nombres cromosòmics.
    El capítol dedicat a les epidermis foliars ofereix l'estudi amb el microscopi òptic i amb el MER de les fulles de 45 poblacions de tàxons ibèrics i europeus de la subsecció. Els caràcters analitzats han estat el model cel-lular. la morfologia de les cèl-lules i dels estomes (relleu primari i secundari i les ceres epicuticulars (relleu terciari. Alguns microcaràcters epidèrmics s'han mostrat especialment útils en taxonomia. Així. el tipus bàsic d'estoma i el model de distribució d'estomes a les du es cares de la fulla, són caràcters que permeten separar tàxons tan pròxims com E. esula L. subsp. esula d'E. esula L. subsp. orientalis (Boiss. in D.C. Molera &Rovira. El tipus morfològic de ceres epicuticulars també permet distingir E. graminifolia Vill. d'E. esula aggr.; i dins d'E. nevadensis Boiss. & Reuter. la subsp. bolosii Molero & Rovira de la resta de subespècies.
    La prospecció citogenètica ha detectat la presència de tan sols

  8. Critical examination of valve design according to sub-section B 3500 of the French design and construction rules for mechanical components of PWR nuclear islands (RCCM January 1985 edition)

    International Nuclear Information System (INIS)

    Huet, J.; Dabrowski, J.F.; Maurin, N.; Quere, M.

    1989-01-01

    The RCCM design rules for class 1 valves (sub-section B 3500), which apply to Pressurized Water Reactor components, are reviewed and the agreement between the principle of sub-section B 3200 and the rules of sub-section B 3600 concerning piping design is examined. The equations used in the code are examined with respect to their origin, their justification and their conservatism. The applicability of the body shape rules and their relationship with fatigue strength reduction factors are also discussed. A parametric analysis is presented to show the influence of transition radii under different loads, including thermal shock. The study specifically examines the stress concentration factors obtained from a 3D finite element analysis of a tee shaped valve under mechanical loading (pressure, bending, etc.). The objective of this study is to understand and improve the existing rules so that ultimately a program can be written which will allow the stress calculations to be confirmed quickly using a microcomputer. (author)

  9. A taxonomic revision of the Cymindis (Pinacodera limbata species group (Coleoptera, Carabidae, Lebiini, including description of a new species from Florida, U.S.A.

    Directory of Open Access Journals (Sweden)

    Wesley Hunting

    2013-01-01

    Full Text Available The Cymindis (Pinacodera limbata species group (Coleoptera, Carabidae, Lebiini is a precinctive New World taxon with ranges extended from portions of temperate southeastern Canada and the U.S.A. through the montane regions of Mexico, south to the Isthmus of Tehuantepec. The group is distinguishable from all other members of the subgenus Pinacodera by males possessing a distinctive sclerite (endophallic plate at the apex of the endophallus. In the past, a lack of material and misunderstandings of range of variation within species have contributed to confusion about how many species there really are.This revision of the limbata species group includes a classification, a key to groups within the subgenus Pinacodera and species within the limbata group, descriptions of species, re-rankings and new synonymies. In total 10 taxa are treated, with 6 new synonyms proposed, 1 new combination introduced and 1 new species described: Cymindis (Pinacodera rufostigma (type locality: Archbold Biological Station, Highlands County, Florida, U.S.A.. Each taxon is characterized in terms of structural features of adults, habitat, geographical distribution, and chorological affinities. Available ecological information and treatments of variation are included.

  10. RETRIEVAL EQUIPMENT DESCRIPTIONS

    International Nuclear Information System (INIS)

    J. Steinhoff

    1997-01-01

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) retrieval from the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. There are no quality assurance requirements or QA controls in this document. Retrieval under normal conditions is accomplished with the same fleet of equipment as is used for emplacement. Descriptions of equipment used for retrieval under normal conditions is found in Emplacement Equipment Descriptions, DI: BCAF00000-01717-5705-00002 (a document in progress). Equipment used for retrieval under abnormal conditions is addressed in this document and consists of the following: (1) Inclined Plane Hauler; (2) Bottom Lift Transporter; (3) Load Haul Dump (LHD) Loader; (4) Heavy Duty Forklift for Emplacement Drifts; (5) Covered Shuttle Car; (6) Multipurpose Vehicle; and (7) Scaler

  11. The identity of three South American “smiliine” treehoppers (Hemiptera: Membracidae) and related taxonomic changes, including description of a new genus in Thuridini

    Science.gov (United States)

    Based on examination of holotype or interpretation of original descriptions, four taxonomic changes are proposed for South American species erroneously placed in the tribe Smiliini: Flynnia, n. gen. (Thuridini) and F. fascipennis (Funkhouser), n. comb. from Bolivia; Antianthe atromarginata (Goding),...

  12. Three dimensional model for particle saltation close to stream beds, including a detailed description of the particle interaction with turbulence and inter-particle collisions

    KAUST Repository

    Moreno, Pablo M.

    2011-05-19

    We present in this paper a new three-dimensional (3-D) model for bed-load sediment transport, based on a Lagrangian description. We analyze generalized sub-models for the velocities after collision and the representation of the bed-roughness. The free-flight sub-model includes the effect of several forces, such as buoyancy, drag, virtual mass, lift, Basset and Magnus, and also addresses the particle rotation. A recent methodology for saving computational time in the Basset force is also employed. The sub-models for the post-collision velocity and rotation are based on the conservation of linear and angular momentum during the collision with the bed. We develop a new 3-D representation for the bed roughness by using geometric considerations. In order to address the interaction of particles with the turbulent flow, we tracked the particles through a computed turbulent velocity field for a smooth flat plate. This velocity field was used as a surrogate of the 3-D turbulent conditions close to the bed in streams. We first checked that the basic turbulence statistics for this velocity field could be used to approximate those in an open-channel flow. We then analyzed the interaction of the sediment and the turbulence for a single and multiple particles. We compared numerical results with experimental data obtained by Niño and García (1998b). We show that model predictions are in good agreement with existing data, in the sand size range. © 2011 ASCE.

  13. Three dimensional model for particle saltation close to stream beds, including a detailed description of the particle interaction with turbulence and inter-particle collisions

    KAUST Repository

    Moreno, Pablo M.; Bombardelli, Fabiá n A.; Gonzá lez, Andrea E.; Calo, Victor M.

    2011-01-01

    We present in this paper a new three-dimensional (3-D) model for bed-load sediment transport, based on a Lagrangian description. We analyze generalized sub-models for the velocities after collision and the representation of the bed-roughness. The free-flight sub-model includes the effect of several forces, such as buoyancy, drag, virtual mass, lift, Basset and Magnus, and also addresses the particle rotation. A recent methodology for saving computational time in the Basset force is also employed. The sub-models for the post-collision velocity and rotation are based on the conservation of linear and angular momentum during the collision with the bed. We develop a new 3-D representation for the bed roughness by using geometric considerations. In order to address the interaction of particles with the turbulent flow, we tracked the particles through a computed turbulent velocity field for a smooth flat plate. This velocity field was used as a surrogate of the 3-D turbulent conditions close to the bed in streams. We first checked that the basic turbulence statistics for this velocity field could be used to approximate those in an open-channel flow. We then analyzed the interaction of the sediment and the turbulence for a single and multiple particles. We compared numerical results with experimental data obtained by Niño and García (1998b). We show that model predictions are in good agreement with existing data, in the sand size range. © 2011 ASCE.

  14. Karyotype characterization of Mugil incilis Hancock, 1830 (Mugiliformes: Mugilidae, including a description of an unusual co-localization of major and minor ribosomal genes in the family

    Directory of Open Access Journals (Sweden)

    Anne Kathrin Hett

    2011-03-01

    Full Text Available This study reports the description of the karyotype of Mugil incilis from Venezuela. The chromosome complement is composed of 48 acrocentric chromosomes, which uniformly decrease in size. Therefore, the homologues can not be clearly identified, with the exception of one of the largest chromosome pairs, classified as number 1, whose homologues may show a subcentromeric secondary constriction, and of chromosome pair number 24, which is considerably smaller than the others. C-banding showed heterochromatic blocks at the centromeric/pericentromeric regions of all chromosomes, which were more conspicuous on chromosomes 1, given the C-positive signals include the secondary constrictions. AgNO3 and fluorescent in situ hybridization (FISH with 45S rDNA demonstrated that the nucleolus organizer regions are indeed located on the secondary constrictions of chromosome pair number 1. FISH with 5S rDNA revealed that the minor ribosomal genes are located on this same chromosome pair, near the NORs, though signals are closer to the centromeres and of smaller size, compared to those of the major ribosomal gene clusters. This is the first description of co-localization of major and minor ribosomal genes in the family. Data are discussed from a cytotaxonomic and phylogenetic perspective.Se presenta la primera descripción del cariotipo de Mugil incilis de Venezuela. El complemento cromosómico está compuesto por 48 cromosomas acrocéntricos uniformemente decrecientes en tamaño. Por lo tanto, los homólogos no pueden ser claramente identificados, con excepción de uno de los pares de mayor tamaño, clasificado como número 1, cuyos homólogos poseen una constricción secundaria subcentromérica, y el par de cromosomas número 24, considerablemente más pequeño que los otros. El bandeo-C reveló bloques heterocromáticos en las regiones centroméricas/pericentroméricas de todos los cromosomas, más conspicuas en el cromosoma 1 en el que las señales C

  15. POLLEN AND SEED SURFACE MORFOLOGY IN SOME REPRESENTATIVES OF THE GENUS RHODODENDRON SUBSECT. RHODORASTRUM (ERICACEAE IN THE RUSSIAN FAR EAST

    Directory of Open Access Journals (Sweden)

    I. M. Koksheeva

    2015-05-01

    Full Text Available Comparative study of pollen and seed morphology of three species of Rhododendron L. subsect. Rhodorastrum (Maxim. Cullen (Rh. dauricum L., Rh. mucronolatum Turcz., Rh. sichotense Pojark. is performed. Results of discriminant analysis of the total of morphometric characters of pollen and seeds have proved the distinctness of all three species from each other. Differences of polen are observed in the type of sculpture (granulate, rugulate, microrugulate and in the diameter of tetrads. The coefficient of elongation of the exotesta cells is established as a valuable morphometric character

  16. Radiation Protection Ordinance 1989. Supplement with Radiation Protection Register Ordinance, general administration regulation pursuant to Sect. 45 Radiation Protection Ordinance, general administration regulation pursuant to Sect. 62 sub-sect. radiation passport

    International Nuclear Information System (INIS)

    Veith, H.M.

    1990-01-01

    The addendum contains regulations issued supplementary to the Radiation Protection Ordinance: The Radiation Protection Register as of April 3, 1990 including the law on the setting up of a Federal Office on Radiation Protection; the general administration regulation pursuant to Sect. 45 Radiation Protection Ordinance as of February 21, 1990; the general administration regulation pursuant to Sect. 62 sub-sect. 2 Radiation Protection Ordinance as of May 3, 1990 (AVV Radiation passport). The volume contains, apart from the legal texts, the appropriate decision by the Bundesrat, the official explanation from the Bundestag Publications as well as a comprehensive introduction into the new legal matter. (orig.) [de

  17. Advances in ultrasonic testing of austenitic stainless steel welds. Towards a 3D description of the material including attenuation and optimisation by inversion

    Science.gov (United States)

    Moysan, J.; Gueudré, C.; Ploix, M.-A.; Corneloup, G.; Guy, Ph.; Guerjouma, R. El; Chassignole, B.

    In the case of multi-pass welds, the material is very difficult to describe due to its anisotropic and heterogeneous properties. Anisotropy results from the metal solidification and is correlated with the grain orientation. A precise description of the material is one of the key points to obtain reliable results with wave propagation codes. A first advance is the model MINA which predicts the grain orientations in multi-pass 316-L steel welds. For flat position welding, good predictions of the grains orientations were obtained using 2D modelling. In case of welding in position the resulting grain structure may be 3D oriented. We indicate how the MINA model can be improved for 3D description. A second advance is a good quantification of the attenuation. Precise measurements are obtained using plane waves angular spectrum method together with the computation of the transmission coefficients for triclinic material. With these two first advances, the third one is now possible: developing an inverse method to obtain the material description through ultrasonic measurements at different positions.

  18. Descriptive Research

    DEFF Research Database (Denmark)

    Wigram, Anthony Lewis

    2003-01-01

    Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

  19. Nevada National Security Site Environmental Report 2011 Attachment A: Site Description

    Energy Technology Data Exchange (ETDEWEB)

    Cathy Wills, ed.

    2012-09-12

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2011. Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  20. Nevada National Security Site Environmental Report 2012 Attachment A: Site Description

    Energy Technology Data Exchange (ETDEWEB)

    Wills, Cathy A

    2013-09-11

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2012 (National Security Technologies, LLC [NSTec], 2013). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  1. Nevada National Security Site Environmental Report 2011 Attachment A: Site Description

    International Nuclear Information System (INIS)

    Wills, Cathy

    2012-01-01

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2011. Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  2. Nevada National Security Site Environmental Report 2016, Attachment A: Site Description

    Energy Technology Data Exchange (ETDEWEB)

    Wills, Cathy [National Security Technologies, LLC. (NSTec), Mercury, NV (United States)

    2017-09-07

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2016 (prepared by National Security Technologies, LLC [NSTec], 2017). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological settings and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  3. Nevada National Security Site Environmental Report 2013 Attachment A: Site Description

    Energy Technology Data Exchange (ETDEWEB)

    Wills, C.

    2014-09-09

    This attachment expands on the general description of the Nevada National Security Site (NNSS) presented in the Introduction to the Nevada National Security Site Environmental Report 2012 (National Security Technologies, LLC [NSTec], 2013). Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  4. Update and Improve Subsection NH - Simplified Elastic and Inelastic Design Analysis Methods

    Energy Technology Data Exchange (ETDEWEB)

    Jeries J. Abou-Hanna; Douglas L. Marriott; Timothy E. McGreevy

    2009-06-27

    The objective of this subtask is to develop a template for the 'Ideal' high temperature design Code, in which individual topics can be identified and worked on separately in order to provide the detail necessary to comprise a comprehensive Code. Like all ideals, this one may not be attainable as a practical matter. The purpose is to set a goal for what is believed the 'Ideal' design Code should address, recognizing that some elements are not mutually exclusive and that the same objectives can be achieved in different way. Most, if not all existing Codes may therefore be found to be lacking in some respects, but this does not mean necessarily that they are not comprehensive. While this subtask does attempt to list the elements which individually or in combination are considered essential in such a Code, the authors do not presume to recommend how these elements should be implemented or even, that they should all be implemented at all. The scope of this subtask is limited to compiling the list of elements thought to be necessary or at minimum, useful in such an 'Ideal' Code; suggestions are provided as to their relationship to one another. Except for brief descriptions, where these are needed for clarification, neither this repot, nor Task 9 as a whole, attempts to address details of the contents of all these elements. Some, namely primary load limits (elastic, limit load, reference stress), and ratcheting (elastic, e-p, reference stress) are dealt with specifically in other subtasks of Task 9. All others are merely listed; the expectation is that they will either be the focus of attention of other active DOE-ASME GenIV Materials Tasks, e.g. creep-fatigue, or to be considered in future DOE-ASME GenIV Materials Tasks. Since the focus of this Task is specifically approximate methods, the authors have deemed it necessary to include some discussion on what is meant by 'approximate'. However, the topic will be addressed in one or

  5. Update and Improve Subsection NH - Simplified Elastic and Inelastic Design Analysis Methods

    International Nuclear Information System (INIS)

    Abou-Hanna, Jeries J.; Marriott, Douglas L.; McGreevy, Timothy E.

    2009-01-01

    The objective of this subtask is to develop a template for the 'Ideal' high temperature design Code, in which individual topics can be identified and worked on separately in order to provide the detail necessary to comprise a comprehensive Code. Like all ideals, this one may not be attainable as a practical matter. The purpose is to set a goal for what is believed the 'Ideal' design Code should address, recognizing that some elements are not mutually exclusive and that the same objectives can be achieved in different way. Most, if not all existing Codes may therefore be found to be lacking in some respects, but this does not mean necessarily that they are not comprehensive. While this subtask does attempt to list the elements which individually or in combination are considered essential in such a Code, the authors do not presume to recommend how these elements should be implemented or even, that they should all be implemented at all. The scope of this subtask is limited to compiling the list of elements thought to be necessary or at minimum, useful in such an 'Ideal' Code; suggestions are provided as to their relationship to one another. Except for brief descriptions, where these are needed for clarification, neither this repot, nor Task 9 as a whole, attempts to address details of the contents of all these elements. Some, namely primary load limits (elastic, limit load, reference stress), and ratcheting (elastic, e-p, reference stress) are dealt with specifically in other subtasks of Task 9. All others are merely listed; the expectation is that they will either be the focus of attention of other active DOE-ASME GenIV Materials Tasks, e.g. creep-fatigue, or to be considered in future DOE-ASME GenIV Materials Tasks. Since the focus of this Task is specifically approximate methods, the authors have deemed it necessary to include some discussion on what is meant by 'approximate'. However, the topic will be addressed in one or more later subtasks. This report describes

  6. The complete nucleotide sequences of the 5 genetically distinct plastid genomes of Oenothera, subsection Oenothera: II. A microevolutionary view using bioinformatics and formal genetic data.

    Science.gov (United States)

    Greiner, Stephan; Wang, Xi; Herrmann, Reinhold G; Rauwolf, Uwe; Mayer, Klaus; Haberer, Georg; Meurer, Jörg

    2008-09-01

    A unique combination of genetic features and a rich stock of information make the flowering plant genus Oenothera an appealing model to explore the molecular basis of speciation processes including nucleus-organelle coevolution. From representative species, we have recently reported complete nucleotide sequences of the 5 basic and genetically distinguishable plastid chromosomes of subsection Oenothera (I-V). In nature, Oenothera plastid genomes are associated with 6 distinct, either homozygous or heterozygous, diploid nuclear genotypes of the 3 basic genomes A, B, or C. Artificially produced plastome-genome combinations that do not occur naturally often display interspecific plastome-genome incompatibility (PGI). In this study, we compare formal genetic data available from all 30 plastome-genome combinations with sequence differences between the plastomes to uncover potential determinants for interspecific PGI. Consistent with an active role in speciation, a remarkable number of genes have high Ka/Ks ratios. Different from the Solanacean cybrid model Atropa/tobacco, RNA editing seems not to be relevant for PGIs in Oenothera. However, predominantly sequence polymorphisms in intergenic segments are proposed as possible sources for PGI. A single locus, the bidirectional promoter region between psbB and clpP, is suggested to contribute to compartmental PGI in the interspecific AB hybrid containing plastome I (AB-I), consistent with its perturbed photosystem II activity.

  7. Progress report on first year of WP5.2. Including detailed description of planned research for WP 5.2

    Energy Technology Data Exchange (ETDEWEB)

    Ellemers, N.; Van Dijk, E.; Terwel, B.; De Vries, G. [Leiden University, Leiden (Netherlands)

    2010-10-15

    This document contains the progress report on the first half year of the CATO-2 WP5.2 PhD project 'Framing effects in communication about CCS'. In the first few months a literature study has been conducted, both on (factors that influence) public perceptions and acceptance of CCS, and on framing. In the last two month, a first study was designed. This study consists of an experiment designed to examine how framing a company's involvement in CCS in terms of economic benefits and/or CSR of the organization affects the corporate image, trust, and perceived 'greenwashing' (deceit). Furthermore, this experiment serves to test the quality of newly developed questionnaires to measure these variables. In addition, this document contains a detailed description of the research planned for WP5.2 written by senior (CATO-2) researchers from January 2010 on. The objective of the research planned for WP5.2 is to examine whether framing of communications by an organization can improve the perceived credibility and trustworthiness of the organization and the information provided. This issue will be examined by a combination of experimental studies and a survey-type study.

  8. First descriptions of dicyemid mesozoans (Dicyemida: Dicyemidae) from Australian octopus (Octopodidae) and cuttlefish (Sepiidae), including a new record of Dicyemennea in Australian waters.

    Science.gov (United States)

    Catalano, Sarah R

    2013-09-01

    Three new species of dicyemid mesozoans are described for the first time from Australian octopus and cuttlefish species. Dicyemennea floscephalum sp. n. is described from Octopus berrima Stranks et Norman (southern keeled octopus) collected from Spencer Gulf and Gulf St. Vincent, South Australia, Australia and represents the first description of a species of Dicyemennea Whitman, 1883 from Australian waters. Dicyema papuceum sp. n. and D. furuyi sp. n. are described from Sepia papuensis Hoyle (Papuan cuttlefish) collected from Shark Bay, Western Australia, Australia. Dicyemennea floscephalum sp. n. is a medium to large species that reaches approximately 4.9 mm in length. The vermiform stages are characterised by having 23-28 peripheral cells, and a disc-shaped, flower-like calotte in larger individuals. An anterior abortive axial cell is absent in vermiform embryos and verruciform cells were not observed in nematogens and rhombogens. Infusoriform embryos comprise 37 cells; one nucleus is present in each urn cell. Dicyema papuceum sp. n. is a small species that reaches approximately 1.1 mm in length. The vermiform stages are characterised by having 30-33 peripheral cells and a relatively small, cap-shaped calotte. An anterior abortive axial cell is absent in vermiform embryos and verruciform cells were occasionally observed in nematogens. Infusoriform embryos comprise 37 cells; two nuclei are present in each urn cell. Dicyema furuyi sp. n. is a large species that reaches approximately 5.3 mm in length. The vermiform stages are characterised by having 22-24 peripheral cells and an elongate calotte. An anterior abortive axial cell is absent in vermiform embryos and verruciform cells were not observed in nematogens and rhombogens. Infusoriform embryos comprise 37 cells; one nucleus is present in each urn cell. Three secondary nematogens were also observed in the right renal appendages of two host individuals, confirming the occurrence of this form.

  9. Preliminary site description Laxemar stage 2.1. Feedback for completion of the site investigation including input from safety assessment and repository engineering

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-09-15

    The Laxemar subarea is the focus for the complete site investigations in the Simpevarp area. The south and southwestern parts of the subarea (the so-called 'focused area') have been designated for focused studies during the remainder of the site investigations. This area, some 5.3 square kilometres in size, is characterised on the surface by an arc shaped body of quartz monzodiorite gently dipping to the north, flanked in the north and south by Aevroe granite. The current report documents work conducted during stage 2.1 of the site-descriptive modelling of the Laxemar subarea. The primary objective of the work performed is to provide feedback to the site investigations at Laxemar to ensure that adequate and timely data and information are obtained during the remaining investigation stage. The work has been conducted in cooperation with the site investigation team at Laxemar and representatives from safety assessment and repository engineering. The principal aim of this joint effort has been to safeguard that adequate data are collected that resolve the remaining issues/uncertainties which are of importance for repository layout and long-term safety. The proposed additional works presented in this report should be regarded as recommended additions and/or modifications in relation to the CSI programme published early 2006. The overall conclusion of the discipline-wise review of critical issues is that the CSI programme overall satisfies the demands to resolve the remaining uncertainties. This is interpreted to be partly a result of the close interaction between the site modelling team, site investigation team and the repository engineering teams, which has been in operation since early 2005. In summary, the performed interpretations and modelling have overall confirmed the version 1.2 results. The exception being Hydrogeology where the new Laxemar 2.1 borehole data suggest more favourable conditions in the south and west parts of the focused area compared

  10. Preliminary site description Laxemar stage 2.1. Feedback for completion of the site investigation including input from safety assessment and repository engineering

    International Nuclear Information System (INIS)

    2006-09-01

    The Laxemar subarea is the focus for the complete site investigations in the Simpevarp area. The south and southwestern parts of the subarea (the so-called 'focused area') have been designated for focused studies during the remainder of the site investigations. This area, some 5.3 square kilometres in size, is characterised on the surface by an arc shaped body of quartz monzodiorite gently dipping to the north, flanked in the north and south by Aevroe granite. The current report documents work conducted during stage 2.1 of the site-descriptive modelling of the Laxemar subarea. The primary objective of the work performed is to provide feedback to the site investigations at Laxemar to ensure that adequate and timely data and information are obtained during the remaining investigation stage. The work has been conducted in cooperation with the site investigation team at Laxemar and representatives from safety assessment and repository engineering. The principal aim of this joint effort has been to safeguard that adequate data are collected that resolve the remaining issues/uncertainties which are of importance for repository layout and long-term safety. The proposed additional works presented in this report should be regarded as recommended additions and/or modifications in relation to the CSI programme published early 2006. The overall conclusion of the discipline-wise review of critical issues is that the CSI programme overall satisfies the demands to resolve the remaining uncertainties. This is interpreted to be partly a result of the close interaction between the site modelling team, site investigation team and the repository engineering teams, which has been in operation since early 2005. In summary, the performed interpretations and modelling have overall confirmed the version 1.2 results. The exception being Hydrogeology where the new Laxemar 2.1 borehole data suggest more favourable conditions in the south and west parts of the focused area compared with the

  11. On the freshwater dinoflagellates presently included in the genus Amphidinium, with a description of Prosoaulax gen. nov

    DEFF Research Database (Denmark)

    Calado, A.; Moestrup, Øjvind

    2005-01-01

    symbionts of marine invertebrates, G. bei and G. linucheae. It also includes the symbionts of corals (‘zooxanthellae') belonging to the genus Symbiodinium, a genus believed to contain the modern representatives of the Suessiales, an order of dinoflagellates extending back into the Mesozoic...

  12. Applying the model of Goal-Directed Behavior, including descriptive norms, to physical activity intentions: A contribution to improving the Theory of Planned Behavior

    Science.gov (United States)

    The theory of planned behavior (TPB) has received its fair share of criticism lately, including calls for it to retire. We contributed to improving the theory by testing extensions such as the model of goal-directed behavior (MGDB, which adds desire and anticipated positive and negative emotions) ap...

  13. Enactment of KEPIC MNH Based on 2007 ASME BPVC Section III Division 1, Subsection NH: Class 1 Components in Elevated Temperature Service

    International Nuclear Information System (INIS)

    Koo, Gyeong Hoi; Kim, J. B.; Lee, H. Y.; Park, C. G.

    2008-11-01

    This report is a draft of an enactment of KEPIC MNH based on 2007 ASME Boiler and Pressure Vessel Code, Section III, Division 1 Subsection NH for Class 1 Components in Elevated Temperature Service and contains of ASME Article NH-3000 design, the mandatory appendix I-14, and non-mandatory appendices T and X

  14. Enactment of KEPIC MNH Based on 2007 ASME BPVC Section III Division 1, Subsection NH: Class 1 Components in Elevated Temperature Service

    Energy Technology Data Exchange (ETDEWEB)

    Koo, Gyeong Hoi; Kim, J. B.; Lee, H. Y.; Park, C. G

    2008-11-15

    This report is a draft of an enactment of KEPIC MNH based on 2007 ASME Boiler and Pressure Vessel Code, Section III, Division 1 Subsection NH for Class 1 Components in Elevated Temperature Service and contains of ASME Article NH-3000 design, the mandatory appendix I-14, and non-mandatory appendices T and X.

  15. 31 CFR Appendix A to Subpart H of... - Notice for Purposes of Subsection 314(b) of the USA Patriot Act and 31 CFR 103.110

    Science.gov (United States)

    2010-07-01

    ...(b) of the USA Patriot Act and 31 CFR 103.110 A Appendix A to Subpart H of Part 103 Money and Finance: Treasury Regulations Relating to Money and Finance FINANCIAL RECORDKEEPING AND REPORTING OF CURRENCY AND... Activity App. A, Subpt. H, Pt. 103 Appendix A to Subpart H of Part 103—Notice for Purposes of Subsection...

  16. Description and assessment of a registration-based approach to include bones for attenuation correction of whole-body PET/MRI.

    Science.gov (United States)

    Marshall, Harry R; Patrick, John; Laidley, David; Prato, Frank S; Butler, John; Théberge, Jean; Thompson, R Terry; Stodilka, Robert Z

    2013-08-01

    Attenuation correction for whole-body PET/MRI is challenging. Most commercial systems compute the attenuation map from MRI using a four-tissue segmentation approach. Bones, the most electron-dense tissue, are neglected because they are difficult to segment. In this work, the authors build on this segmentation approach by adding bones using a registration technique and assessing its performance on human PET images. Twelve oncology patients were imaged with FDG PET/CT and MRI using a Turbo-FLASH pulse sequence. A database of 121 attenuation correction quality CT scans was also collected. Each patient MRI was compared to the CT database via weighted heuristic measures to find the "most similar" CT in terms of body geometry. The similar CT was aligned to the MRI with a deformable registration method. Two MRI-based attenuation maps were computed. One was a standard four-tissue segmentation (air, lung, fat, and lean tissue) using basic image processing techniques. The other was identical, except the bones from the aligned CT were added. The PET data were reconstructed with the patient's CT-based attenuation map (the silver standard) and both MRI-based attenuation maps. The relative errors of the MRI-based attenuation corrections were computed in 14 standardized volumes of interest, in lesions, and over whole tissues. The squared Pearson correlation coefficient was also calculated over whole tissues. Statistical testing was done with ANOVAs and paired t-tests. The MRI-based attenuation correction ignoring bone had relative errors ranging from -37% to -8% in volumes of interest containing bone. By including bone, the magnitude of the relative error was reduced in all cases (pbone was improved from a mean of -7.5% to 2% (pbone reduced the magnitude of relative error in three cases (pbone slightly increased relative error in lung from 7.7% to 8.0% (p=0.002), in fat from 8.5% to 9.2% (pbone from -14.6% to 1.3% (pbone was included or not. The approach to include bones in MRI

  17. Illustrated key for identification of the species included in the genus Leptoglossus (Hemiptera: Heteroptera: Coreidae: Coreinae: Anisoscelini), and descriptions of five new species and new synonyms.

    Science.gov (United States)

    Brailovsky, Harry

    2014-05-05

    Five new species of Leptoglossus are described: L.caicosensis from Turks and Caicos Island, L. egeri and L. impensus from Bolivia, L. franckei from Costa Rica, and L. polychromus from Ecuador, Cooperative Republic of Guiana (British Guiana), and French Guiana. Leptoglossus argentinus Bergroth is synonymized under L. chilensis chilensis (Spinola) and Narnia anaticula Brailovsky & Barrera under Leptoglossus occidentalis Heidemann. Dorsal view drawings and key to the 61 known species and 1 subspecies are included; a complete checklist, and the position of each species within the species-group defined herein, are given except for two species L. macrophylus Stål and L. polychromus sp.nov., that are insertae-sedis. The pronotal disk, hind legs, and male genital capsule of the new species here described are illustrated.

  18. A novel phylogeny of the Gelidiales (Rhodophyta) based on five genes including the nuclear CesA, with descriptions of Orthogonacladia gen. nov. and Orthogonacladiaceae fam. nov.

    Science.gov (United States)

    Boo, Ga Hun; Le Gall, Line; Miller, Kathy Ann; Freshwater, D Wilson; Wernberg, Thomas; Terada, Ryuta; Yoon, Kyung Ju; Boo, Sung Min

    2016-08-01

    Although the Gelidiales are economically important marine red algae producing agar and agarose, the phylogeny of this order remains poorly resolved. The present study provides a molecular phylogeny based on a novel marker, nuclear-encoded CesA, plus plastid-encoded psaA, psbA, rbcL, and mitochondria-encoded cox1 from subsets of 107 species from all ten genera within the Gelidiales. Analyses of individual and combined datasets support the monophyly of three currently recognized families, and reveal a new clade. On the basis of these results, the new family Orthogonacladiaceae is described to accommodate Aphanta and a new genus Orthogonacladia that includes species previously classified as Gelidium madagascariense and Pterocladia rectangularis. Acanthopeltis is merged with Gelidium, which has nomenclatural priority. Nuclear-encoded CesA was found to be useful for improving the resolution of phylogenetic relationships within the Gelidiales and is likely to be valuable for the inference of phylogenetic relationship among other red algal taxa. Copyright © 2016 Elsevier Inc. All rights reserved.

  19. The WECHSL-Mod3 code: A computer program for the interaction of a core melt with concrete including the long term behavior. Model description and user's manual

    International Nuclear Information System (INIS)

    Foit, J.J.; Adroguer, B.; Cenerino, G.; Stiefel, S.

    1995-02-01

    The WECHSL-Mod3 code is a mechanistic computer code developed for the analysis of the thermal and chemical interaction of initially molten reactor materials with concrete in a two-dimensional as well as in a one-dimensional, axisymmetrical concrete cavity. The code performs calculations from the time of initial contact of a hot molten pool over start of solidification processes until long term basemat erosion over several days with the possibility of basemat penetration. It is assumed that an underlying metallic layer exists covered by an oxidic layer or that only one oxidic layer is present which can contain a homogeneously dispersed metallic phase. Heat generation in the melt is by decay heat and chemical reactions from metal oxidation. Energy is lost to the melting concrete and to the upper containment by radiation or evaporation of sumpwater possibly flooding the surface of the melt. Thermodynamic and transport properties as well as criteria for heat transfer and solidification processes are internally calculated for each time step. Heat transfer is modelled taking into account the high gas flux from the decomposing concrete and the heat conduction in the crusts possibly forming in the long term at the melt/concrete interface. The CALTHER code (developed at CEA, France) which models the radiative heat transfer from the upper surface of the corium melt to the surrounding cavity is implemented in the present WECHSL version. The WECHSL code in its present version was validated by the BETA, ACE and SURC experiments. The test samples include a BETA and the SURC2 post test calculations and a WECHSL application to a reactor accident. (orig.) [de

  20. Molecular phylogeny and taxonomic revision of the genus Wittrockiella (Pithophoraceae, Cladophorales), including the descriptions of W. australis sp. nov. and W. zosterae sp. nov.

    Science.gov (United States)

    Boedeker, Christian; O'Kelly, Charles J; West, John A; Hanyuda, Takeaki; Neale, Adele; Wakana, Isamu; Wilcox, Mike D; Karsten, Ulf; Zuccarello, Giuseppe C

    2017-06-01

    Wittrockiella is a small genus of filamentous green algae that occurs in habitats with reduced or fluctuating salinities. Many aspects of the basic biology of these algae are still unknown and the phylogenetic relationships within the genus have not been fully explored. We provide a phylogeny based on three ribosomal markers (ITS, LSU, and SSU rDNA) of the genus, including broad intraspecific sampling for W. lyallii and W. salina, recommendations for the use of existing names are made, and highlight aspects of their physiology and life cycle. Molecular data indicate that there are five species of Wittrockiella. Two new species, W. australis and W. zosterae, are described, both are endophytes. Although W. lyallii and W. salina can be identified morphologically, there are no diagnostic morphological characters to distinguish between W. amphibia, W. australis, and W. zosterae. A range of low molecular weight carbohydrates were analyzed but proved to not be taxonomically informative. The distribution range of W. salina is extended to the Northern Hemisphere as this species has been found in brackish lakes in Japan. Furthermore, it is shown that there are no grounds to recognize W. salina var. kraftii, which was described as an endemic variety from a freshwater habitat on Lord Howe Island, Australia. Culture experiments indicate that W. australis has a preference for growth in lower salinities over full seawater. For W. amphibia and W. zosterae, sexual reproduction is documented, and the split of these species is possibly attributable to polyploidization. © 2017 Phycological Society of America.

  1. A survey of nematodes of the genus Cucullanus Müller, 1777 (Nematoda, Seuratoidea) parasitic in marine fishes off Brazil, including description of three new species.

    Science.gov (United States)

    Vieira, Fabiano M; Pereira, Felipe B; Pantoja, Camila; Soares, Iris A; Pereira, Aldenice N; Timi, Juan T; Scholz, Tomáš; Luque, José L

    2015-11-05

    A taxonomic survey of six nematode species (including three new taxa) from the genus Cucullanus Müller, 1777, parasites of marine fishes off the Brazilian coast, is provided. Nematodes were studied using light and scanning electron microscopy (SEM). Cucullanus gastrophysi n. sp. parasitic in Lophius gastrophysus Miranda Ribeiro differs from its congeners by the combination of the following features: shape and number of sclerotized structures in the oesophastome (a pair of lateral elongate structures and a single small reniform one), position of deirids and excretory pore (both anterior to oesophagus base), spicule length and spicule/body length ratio (0.97-1.29 mm and 6.5-10.5%, respectively), morphology and length of gubernaculum (V-shaped, 107-135 µm long). Cucullanus protrudens n. sp. from Pagrus pagrus (Linnaeus) has the cloacal lips broadly protruded, which differentiates it from several species of Cucullanus; other features, e.g., the length of spicules and gubernaculum (400-415 µm and 91-103 µm, respectively), arrangement of caudal papillae and position of excretory pore (slightly posterior to oesophagus-intestine junction) also characterize this species. Cucullanus pseudopercis n. sp. from Pseudopercis semifasciata (Cuvier) has deirids and excretory pore posterior to the oesophagus-intestine junction, which distinguishes the species from most of the congeners; furthermore, the arrangement of caudal papillae in combination with the length of spicules and gubernaculum (1.0-1.5 mm and 178-196 µm, respectively) separate this species from other taxa. Newly collected specimens of C. cirratus Müller, 1777 (type species of the genus) from Urophycis brasiliensis (Kaup), C. pedroi from Conger orbignianus Valenciennes (type host of the species) and C. genypteri Sardella, Navone & Timi, 1997 from Genypterus brasiliensis Regan, were studied as well. Comparisons between newly collected samples and the taxonomic data available for each respective species revealed

  2. Descriptive statistics.

    Science.gov (United States)

    Nick, Todd G

    2007-01-01

    Statistics is defined by the Medical Subject Headings (MeSH) thesaurus as the science and art of collecting, summarizing, and analyzing data that are subject to random variation. The two broad categories of summarizing and analyzing data are referred to as descriptive and inferential statistics. This chapter considers the science and art of summarizing data where descriptive statistics and graphics are used to display data. In this chapter, we discuss the fundamentals of descriptive statistics, including describing qualitative and quantitative variables. For describing quantitative variables, measures of location and spread, for example the standard deviation, are presented along with graphical presentations. We also discuss distributions of statistics, for example the variance, as well as the use of transformations. The concepts in this chapter are useful for uncovering patterns within the data and for effectively presenting the results of a project.

  3. Guidelines for Description

    NARCIS (Netherlands)

    Links, P.; Horsman, Peter; Kühnel, Karsten; Priddy, M.; Reijnhoudt, Linda; Merenmies, Mark

    2013-01-01

    The Guidelines follow the conceptual metadata model (deliverable 17.2). They include guidelines for description of collection-holding institutions, document collections, organisations, personalities, events, camps and ghettos. As much as possible the guidelines comply with the descriptive standards

  4. Regulatory Safety Issues in the Structural Design Criteria of ASME Section III Subsection NH and for Very High Temperatures for VHTR and GEN IV

    International Nuclear Information System (INIS)

    O'Donnell, William J.; Griffin, Donald S.

    2007-01-01

    The objective of this task is to identify issues relevant to ASME Section III, Subsection NH [1], and related Code Cases that must be resolved for licensing purposes for VHTGRs (Very High Temperature Gas Reactor concepts such as those of PBMR, Areva, and GA); and to identify the material models, design criteria, and analysis methods that need to be added to the ASME Code to cover the unresolved safety issues. Subsection NH was originally developed to provide structural design criteria and limits for elevated-temperature design of Liquid Metal Fast Breeder Reactor (LMFBR) systems and some gas-cooled systems. The U.S. Nuclear Regulatory Commission (NRC) and its Advisory Committee for Reactor Safeguards (ACRS) reviewed the design limits and procedures in the process of reviewing the Clinch River Breeder Reactor (CRBR) for a construction permit in the late 1970s and early 1980s, and identified issues that needed resolution. In the years since then, the NRC and various contractors have evaluated the applicability of the ASME Code and Code Cases to high-temperature reactor designs such as the VHTGRs, and identified issues that need to be resolved to provide a regulatory basis for licensing. This Report describes: (1) NRC and ACRS safety concerns raised during the licensing process of CRBR , (2) how some of these issues are addressed by the current Subsection NH of the ASME Code; and (3) the material models, design criteria, and analysis methods that need to be added to the ASME Code and Code Cases to cover unresolved regulatory issues for very high temperature service.

  5. Regulatory Safety Issues in the Structural Design Criteria of ASME Section III Subsection NH and for Very High Temperatures for VHTR & GEN IV

    Energy Technology Data Exchange (ETDEWEB)

    William J. O’Donnell; Donald S. Griffin

    2007-05-07

    The objective of this task is to identify issues relevant to ASME Section III, Subsection NH [1], and related Code Cases that must be resolved for licensing purposes for VHTGRs (Very High Temperature Gas Reactor concepts such as those of PBMR, Areva, and GA); and to identify the material models, design criteria, and analysis methods that need to be added to the ASME Code to cover the unresolved safety issues. Subsection NH was originally developed to provide structural design criteria and limits for elevated-temperature design of Liquid Metal Fast Breeder Reactor (LMFBR) systems and some gas-cooled systems. The U.S. Nuclear Regulatory Commission (NRC) and its Advisory Committee for Reactor Safeguards (ACRS) reviewed the design limits and procedures in the process of reviewing the Clinch River Breeder Reactor (CRBR) for a construction permit in the late 1970s and early 1980s, and identified issues that needed resolution. In the years since then, the NRC and various contractors have evaluated the applicability of the ASME Code and Code Cases to high-temperature reactor designs such as the VHTGRs, and identified issues that need to be resolved to provide a regulatory basis for licensing. This Report describes: (1) NRC and ACRS safety concerns raised during the licensing process of CRBR , (2) how some of these issues are addressed by the current Subsection NH of the ASME Code; and (3) the material models, design criteria, and analysis methods that need to be added to the ASME Code and Code Cases to cover unresolved regulatory issues for very high temperature service.

  6. Physics 3204. Course Description.

    Science.gov (United States)

    Newfoundland and Labrador Dept. of Education.

    A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

  7. Deliverable 6.2 - Software: upgraded MC simulation tools capable of simulating a complete in-beam ET experiment, from the beam to the detected events. Report with the description of one (or few) reference clinical case(s), including the complete patient model and beam characteristics

    CERN Document Server

    The ENVISION Collaboration

    2014-01-01

    Deliverable 6.2 - Software: upgraded MC simulation tools capable of simulating a complete in-beam ET experiment, from the beam to the detected events. Report with the description of one (or few) reference clinical case(s), including the complete patient model and beam characteristics

  8. Revised description and classification of atypical isolates of Pasteurella multocida from bovine lungs based on genotypic characterization to include variants previously classified as biovar 2 of Pasteurella canis and Pasteurella avium

    DEFF Research Database (Denmark)

    Christensen, Henrik; Angen, Øystein; Olsen, John E.

    2004-01-01

    Strains deviating in key phenotypic characters, mainly isolated from cases of bovine pneumonia in five European countries, were genotyped in order to examine their genotypic relationship with Pasteurella multocida. Twenty-two strains of Pasteurella avium biovar 2, including variants in indole, xy...

  9. A qualitative description of falls in a neuro-rehabilitation unit: the use of a standardised fall report including the International Classification of Functioning (ICF) to describe activities and environmental factors.

    Science.gov (United States)

    Saverino, Alessia; Moriarty, Amy; Rantell, Khadija; Waller, Denise; Ayres, Rachael; Playford, Diane

    2015-01-01

    Falls are a recognised problem for people with long-term neurological conditions but less is known about fall risk in young adults. This study describes fallers' and falls' characteristics in adults less than 60 years old, in a neuro-rehabilitation unit. This single-centre, longitudinal, observational study included 114 consecutive admissions to a UK neuro-rehabilitation unit over 20 months. The demographic and clinical characteristics of eligible patients included age, sex, diagnosis, hospital length of stay and the Functional Independence Measure (FIM). Falls were recorded prospectively in a fall report, using the activities and environmental domains of the International Classification of Functioning (ICF). A total of 34 (30%) patients reported a fall, with 50% experiencing more than one fall. The majority of falls (60%) occurred during the first 2 weeks, during day-time (90%) and during mobile activities (70%). Overall, falls rate (95% confidence interval) was 1.33 (1.04 to 1.67) per 100 d of patient hospital stay. Factors associated with increased falls included becoming a walker during admission or being cognitively impaired. There were no serious fall-related injuries. The first 2 weeks of admission is a high risk time for fallers, in particular those who become walkers or are cognitively impaired. Prevention policies should be put in place based on fall characteristics. Implications for Rehabilitation The ICF is a valuable instrument for describing subject and environmental factors during a fall-event. Falls are frequent events but do not usually cause serious injuries during inpatient rehabilitation. There is an increased fall risk for subjects with cognitive impairments or those relearning how to walk.

  10. A novel description of a syndrome consisting of 7q21.3 deletion including DYNC1I1 with preserved DLX5/6 without ectrodactyly: a case report.

    Science.gov (United States)

    Ramos-Zaldívar, Héctor M; Martínez-Irías, Daniel G; Espinoza-Moreno, Nelson A; Napky-Rajo, José S; Bueso-Aguilar, Tulio A; Reyes-Perdomo, Karla G; Montes-Gambarelli, Jimena A; Euceda, Isis M; Ponce-Barahona, Aldo F; Gámez-Fernández, Carlos A; Moncada-Arita, Wilberg A; Palomo-Bermúdez, Victoria A; Jiménez-Faraj, Julia E; Hernández-Padilla, Amanda G; Olivera, Denys A; Robertson, Kevin J; Leiva-Sanchez, Luis A; Herrera-Paz, Edwin Francisco

    2016-06-13

    Chromosomal region 7q21.3 comprises approximately 5.2 mega base pairs that include genes DLX5/6, SHFM1, and DYNC1I1 associated with split hand/split foot malformation 1. So far, there are reports of eight families with deletion of DYNC1I1 and preserved DLX5/6 associated with ectrodactyly. From these families, only three patients did not present ectrodactyly and, unlike our patient, no other cases have been described as having craniofacial dysmorphology, mitral valve prolapse, kyphoscoliosis, inguinal herniae, or personality disorder. There is no designation described in the literature for patients with syndromic manifestations without ectrodactyly, which hinders diagnosis. We report the case of a 44-year-old mestizo (combined European and Amerindian descent) man with a 3191 kilo base pairs deletion and International System for Human Cytogenetic Nomenclature array 7q21.3 (93,389,222-96,579,845)x1. Clinical manifestations included micrognathia, retrognathia, wormian bones, auditory canal stenosis, depressed nasal bridge, epicanthal fold, fullness of upper eyelid, long philtrum, low-set ears, sensorineural hearing loss, kyphoscoliosis, bilateral inguinal herniae, mild mitral valve prolapse, and paranoid personality disorder. His isolated DNA was analyzed using a CytoScan HD Microarray system. Chromosome Analysis Suite software was utilized for the microarray analysis. All copy number changes were determined using the human genome build 19 (hg19/NCBI build 37). Cases of deletions within chromosome 7q21.3 that include the split hand/split foot malformation 1 region represent a diagnostic challenge when not presenting ectrodactyly despite being syndromic. Due to the heterogeneity of the region, a better method to group and classify these patients is needed to facilitate their clinical diagnosis. For this purpose, we suggest that patients with 7q21.3 deletion including DYNC1I1 and preserved DLX5/6 without ectrodactyly, accompanied by craniofacial dysmorphology

  11. A novel description of a syndrome consisting of 7q21.3 deletion including DYNC1I1 with preserved DLX5/6 without ectrodactyly: a case report

    OpenAIRE

    Ramos-Zald?var, H?ctor M.; Mart?nez-Ir?as, Daniel G.; Espinoza-Moreno, Nelson A.; Napky-Rajo, Jos? S.; Bueso-Aguilar, Tulio A.; Reyes-Perdomo, Karla G.; Montes-Gambarelli, Jimena A.; Euceda, Isis M.; Ponce-Barahona, Aldo F.; G?mez-Fern?ndez, Carlos A.; Moncada-Arita, Wilberg A.; Palomo-Berm?dez, Victoria A.; Jim?nez-Faraj, Julia E.; Hern?ndez-Padilla, Amanda G.; Olivera, Denys A.

    2016-01-01

    Background Chromosomal region 7q21.3 comprises approximately 5.2 mega base pairs that include genes DLX5/6, SHFM1, and DYNC1I1 associated with split hand/split foot malformation 1. So far, there are reports of eight families with deletion of DYNC1I1 and preserved DLX5/6 associated with ectrodactyly. From these families, only three patients did not present ectrodactyly and, unlike our patient, no other cases have been described as having craniofacial dysmorphology, mitral valve prolapse, kypho...

  12. Taxonomic revision of Phascogale tapoatafa (Meyer, 1793) (Dasyuridae; Marsupialia), including descriptions of two new subspecies and confirmation of P. pirata Thomas, 1904 as a ‘Top End’ endemic

    Science.gov (United States)

    Aplin, K. P.; Rhind, S. G.; Ten Have, J.; Chesser, R. Terry

    2015-01-01

    The Australian Brush-tailed Phascogale (Phascogale tapoatafa sensu lato) has a broad but highly fragmented distribution around the periphery of the Australian continent and all populations are under significant ongoing threat to survival. A new appraisal of morphological and molecular diversity within the group reveals that the population in the ‘Top End’ of the Northern Territory is specifically distinct from all others, including those in the Kimberley region of Western Australia to the west and on Cape York of Queensland to the east. The name P. pirata Thomas, 1904 is available for the ‘Top End’ taxon. Three geographically disjunct populations are distinguished at subspecies level within P. tapoatafa on a suite of external and cranio-dental features; these are found in southeast Australia from South Australia to mid-coastal Queensland (nominotypical tapoatafa), southwest Western Australia (wambenger subsp. nov.), and the Kimberley region of Western Australia (kimberleyensis subsp. nov.). A potential fourth subspecies occurs on Cape York but remains too poorly represented in collections for adequate characterization. Molecular divergence estimates based on partial sequences of the mitochondrial cytochrome b gene indicate that the range disjunction across southern Australia probably dates from the Late Pliocene, with the multiple disjunctions across northern Australia being more recent though almost certainly exceeding 400,000 years. An argument is made for the continued use of the subspecies rank in Australian mammalogy, despite a general lack of consistency in its current application.

  13. The significance of the environmental 'cross-section' clause of article 130r section 2 subsection 2 of the EEC treaty for the realization of the Single European Market

    International Nuclear Information System (INIS)

    Breier, A.S.

    1992-01-01

    The completion of the single European Market on 31.12.1992 has not only led to economic advantages within the European Community. The author exemplifies the detrimental environmental effects brought about by the framing of tax, energy, goods traffic and aviation policies for the purposes of the Single Market in accordance with EEC Treaty. On viewing the factual material the author comes to the conclusion that at least the one-sided concepts of the two areas of traffic policy are incompatible with the environmental ''cross-section'' clause of Article 130r Section 2 Subsection 2 of the EEC Treaty. (orig.) [de

  14. CRAC2 model description

    International Nuclear Information System (INIS)

    Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

    1984-03-01

    The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions

  15. Cohort description

    DEFF Research Database (Denmark)

    Dantoft, Thomas Meinertz; Ebstrup, Jeanette Frost; Linneberg, Allan

    2017-01-01

    -76 years from the general population examined from 2011 to 2015. The survey comprises screening questionnaires for five types of FSS, ie, fibromyalgia, whiplash-associated disorder, multiple chemical sensitivity, irritable bowel syndrome, and chronic fatigue syndrome, and for the unifying diagnostic......The Danish study of Functional Disorders (DanFunD) cohort was initiated to outline the epidemiology of functional somatic syndromes (FSS) and is the first larger coordinated epidemiological study focusing exclusively on FSS. FSS are prevalent in all medical settings and can be defined as syndromes...... category of bodily distress syndrome. Additional data included a telephone-based diagnostic interview assessment for FSS, questionnaires on physical and mental health, personality traits, lifestyle, use of health care services and social factors, and a physical examination with measures...

  16. Generalizing: The descriptive struggle

    Directory of Open Access Journals (Sweden)

    Barney G. Glaser, Ph.D.; Hon Ph.D.

    2006-11-01

    Full Text Available The literature is not kind to the use of descriptive generalizations. Authors struggle and struggle to find and rationalize a way to use them and then fail in spite of trying a myriad of work-arounds. And then we have Lincoln and Guba’s famous statement: “The only generalization is: there is no generalization” in referring to qualitative research. (op cit, p. 110 They are referring to routine QDA yielding extensive descriptions, but which tacitly include conceptual generalizations without any real thought of knowledge about them. In this chapter I wish to explore this struggle for the purpose of explaining that the various contra arguments to using descriptive generalizations DO NOT apply to the ease of using conceptual generalizations yielded in SGT and especially FGT. I will not argue for the use of descriptive generalization. I agree with Lincoln and Guba with respect to QDA, “the only generalization is: there is no generalization.” It is up to the QDA methodologists, of whom there are many; to continue the struggle and I wish them well.

  17. Management control system description

    Energy Technology Data Exchange (ETDEWEB)

    Bence, P. J.

    1990-10-01

    This Management Control System (MCS) description describes the processes used to manage the cost and schedule of work performed by Westinghouse Hanford Company (Westinghouse Hanford) for the US Department of Energy, Richland Operations Office (DOE-RL), Richland, Washington. Westinghouse Hanford will maintain and use formal cost and schedule management control systems, as presented in this document, in performing work for the DOE-RL. This MCS description is a controlled document and will be modified or updated as required. This document must be approved by the DOE-RL; thereafter, any significant change will require DOE-RL concurrence. Westinghouse Hanford is the DOE-RL operations and engineering contractor at the Hanford Site. Activities associated with this contract (DE-AC06-87RL10930) include operating existing plant facilities, managing defined projects and programs, and planning future enhancements. This document is designed to comply with Section I-13 of the contract by providing a description of Westinghouse Hanford's cost and schedule control systems used in managing the above activities. 5 refs., 22 figs., 1 tab.

  18. Description logic rules

    CERN Document Server

    Krötzsch, M

    2010-01-01

    Ontological modelling today is applied in many areas of science and technology,including the Semantic Web. The W3C standard OWL defines one of the most important ontology languages based on the semantics of description logics. An alternative is to use rule languages in knowledge modelling, as proposed in the W3C's RIF standard. So far, it has often been unclear how to combine both technologies without sacrificing essential computational properties. This book explains this problem and presents new solutions that have recently been proposed. Extensive introductory chapters provide the necessary

  19. MCO Monitoring activity description

    International Nuclear Information System (INIS)

    SEXTON, R.A.

    1998-01-01

    Spent Nuclear Fuel remaining from Hanford's N-Reactor operations in the 1970s has been stored under water in the K-Reactor Basins. This fuel will be repackaged, dried and stored in a new facility in the 200E Area. The safety basis for this process of retrieval, drying, and interim storage of the spent fuel has been established. The monitoring of MCOS in dry storage is a currently identified issue in the SNF Project. This plan outlines the key elements of the proposed monitoring activity. Other fuel stored in the K-Reactor Basins, including SPR fuel, will have other monitoring considerations and is not addressed by this activity description

  20. Olkiluoto site description 2006

    International Nuclear Information System (INIS)

    Andersson, J.; Ahokas, H.; Hudson, J.A.

    2007-03-01

    subjective criteria are used for identifying faults; Regarding the rock mechanics description, presented in Chapter 5, additional data have been assessed and the overall level of rock mechanics understanding has increased compared with previous model versions; A new hydrogeological model has been developed, which is presented in Chapter 6, which places more emphasis on the hydraulic data. Pressure anomalies are now stronger drivers for including hydraulic zones in the model and the number of explicit uncertain cases is greater; The hydrogeochemical description, presented in Chapter 7, is consistent with the previous model and there is an increased level of internal consistency in the hydrogeochemical understanding. Information on gases and understanding of their origin has increased significantly. Based on these descriptions, the report also makes a second set of predictions in Chapter 9 concerning the expected geology and rock mechanics properties to be found during the excavation of the ONKALO and also predicts the hydrogeological and hydrogeochemical impacts of these excavations. Two types of predictions are made: type A predictions, that use only the latest version of the overall Site Model; and type B predictions, that also use all the data from the tunnel, which are derived from activities, such as tunnel mapping and Pilot holes. The Site Descriptive Modelling involves uncertainties and it is necessary to assess the confidence in such modelling. This has been assessed through special protocols in a technical auditing exercise, which is presented in Chapter 10. These protocols investigate whether all data have been considered and understood; where the uncertainties lie and what the potential is for alternative interpretations; whether there is sufficient consistency between disciplines and consistency with the past evolution of the site; as well as comparisons with previous model versions. Chapter 11 concludes that, overall, the uncertainty and confidence assessment

  1. TRANSPORT AND EMPLACEMENT EQUIPMENT DESCRIPTIONS

    International Nuclear Information System (INIS)

    1997-01-01

    The objective and the scope of this document are to list and briefly describe the major mobile equipment necessary for waste package (WP) Transport and Emplacement in the proposed subsurface nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the equipment are explained and summarized in the individual subsections of this document. The Transport and Emplacement equipment described in this document consists of the following: (1) WP Transporter; (2) Reusable Rail Car; (3) Emplacement Gantry; (4) Gantry Carrier; and (5) Transport Locomotive

  2. THULE: A detailed description

    International Nuclear Information System (INIS)

    Terry, M.J.

    1964-07-01

    This report describes the THULE scheme of lattice physics calculation which has been developed in FORTRAN for the IBM 7090. This scheme predicts the neutron flux over energy and space, for many groups and regions, together with reactivity and reaction rate edits for both a single lattice cell and a reactor core. This report describes in detail the input requirements for the THULE programme which forms the main part of the scheme. Brief descriptions of the 7090 programmes TED 6 and NOAH are included as appendices. TED 6 will produce the THULE edits from a WDSN output tape and NOAH is a version of the METHUSELAH programme which contains many of the THULE edits and will also produce input cards for THULE. (author)

  3. Descriptive sensory evaluations

    DEFF Research Database (Denmark)

    Dehlholm, Christian

    A recent trend in descriptive sensory evaluation methodology has been the application of rapid evaluation techniques. The ease in use makes the techniques extremely easy to implement by industry and university environments. Thus, one might not consider validity in the choice of method. The overall...... aim of this thesis is to compare and evaluate selected rapid evaluation techniques for sensory profiling. Method variations have been suggested for evaluations in product development and quality control, and method insight is provided. The thesis includes three original studies, designed...... as a consequence of the current practices and needs faced in the industry. Study I compared applicability and validity of rapid methods across several panels of trained assessors. Two rapid approaches were introduced for the evaluation of foods. The first method, ‘Free Multiple Sorting’, allows subjects to perform...

  4. Draft ASME Boiler and Pressure Vessel Code Section III, Division 5, Section HB, Subsection B, Code Case for Alloy 617 and Background Documentation

    Energy Technology Data Exchange (ETDEWEB)

    Wright, Julie Knibloe [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-08-01

    Alloy 617 is the leading candidate material for an intermediate heat exchanger for the very high temperature reactor. To evaluate the behavior of this material in the expected service conditions, strain controlled cyclic tests that include long hold times up to 240 minutes at maximum tensile strain were conducted at 850°C. In terms of the total number of cycles to failure, the fatigue resistance decreased when a hold time was added at peak tensile strain. Increases in the tensile hold duration degraded the creep fatigue resistance, at least to the investigated strain controlled hold time of up to 60 minutes at the 0.3% strain range and 240 minutes at the 1.0% strain range. The creep fatigue deformation mode is considered relative to the lack of saturation, or continually decreasing number of cycles to failure with increasing hold times. Additionally, preliminary values from the 850°C creep fatigue data are calculated for the creep fatigue damage diagram and have higher values of creep damage than those from tests at 950°C.

  5. Emended description of Pasteuria nishizawae.

    Science.gov (United States)

    Noel, Gregory R; Atibalentja, N; Domier, Leslie L

    2005-07-01

    The description of the Gram-positive, obligately parasitic, mycelial and endospore-forming bacterium, Pasteuria nishizawae, is emended to include additional observations on the life cycle, host specificity and endospore morphology. The nucleotide sequence of the 16S rRNA gene is also provided.

  6. YUCCA MOUNTAIN SITE DESCRIPTION

    International Nuclear Information System (INIS)

    Simmons, A.M.

    2004-01-01

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel

  7. YUCCA MOUNTAIN SITE DESCRIPTION

    Energy Technology Data Exchange (ETDEWEB)

    A.M. Simmons

    2004-04-16

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

  8. Agile Systems Engineering-Kanban Scheduling Subsection

    Science.gov (United States)

    2017-03-10

    Community Programs, derived an initial methodology for evaluating software-related MPTs that might be applicable in systems engineering through surveys...was also conducted using a different simulation tool (SIMIO) as a reference. Appendix A provides a short white paper on the methodology and the...resource and task assignment, and the Incremental Commitment Spiral Model (ICSM) to manage constantly changing risks, clarifying objectives and

  9. Nevada National Security Site Environmental Report 2010, Attachment A: Site Description

    Energy Technology Data Exchange (ETDEWEB)

    C. Wills, ed.

    2011-09-13

    Introduction to the Nevada National Security Site Environmental Report 2010. Included are subsections that summarize the site’s geological, hydrological, climatological, and ecological setting and the cultural resources of the NNSS. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NNSS. An adequate knowledge of the site’s environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NNSS. The NNSS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NNSS operations. These key features include the general remote location of the NNSS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  10. Descriptive set theory

    CERN Document Server

    Moschovakis, YN

    1987-01-01

    Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

  11. Description logics of context

    CSIR Research Space (South Africa)

    Klarman, S

    2013-05-01

    Full Text Available We introduce Description Logics of Context (DLCs) - an extension of Description Logics (DLs) for context-based reasoning. Our approach descends from J. McCarthy's tradition of treating contexts as formal objects over which one can quantify...

  12. 40 CFR 233.11 - Program description.

    Science.gov (United States)

    2010-07-01

    ... organization and structure of the State agency (agencies) which will have responsibility for administering the... under § 233.10 shall include: (a) A description of the scope and structure of the State's program. The... will coordinate its enforcement strategy with that of the Corps and EPA; (h) A description of the...

  13. A DESCRIPTION OF BUFO PARDALIS TADPOLES (ANURA ...

    African Journals Online (AJOL)

    Tadpoles of Bufo parda/is Hewitt from Kei Road, Cape Province, are described. INTRODUCTION. Although tadpoles of B. pardalis have been included in Van Dijk's (1971) key to the genus Bufa, no adequate description of this taxon has yet been published. Further studies on variability depend upon a complete description ...

  14. New seismograph includes filters

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-02

    The new Nimbus ES-1210 multichannel signal enhancement seismograph from EG and G geometrics has recently been redesigned to include multimode signal fillers on each amplifier. The ES-1210F is a shallow exploration seismograph for near subsurface exploration such as in depth-to-bedrock, geological hazard location, mineral exploration, and landslide investigations.

  15. Hardware description languages

    Science.gov (United States)

    Tucker, Jerry H.

    1994-01-01

    Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

  16. 77 FR 1505 - Certain Integrated Circuits, Chipsets, and Products Containing Same Including Televisions; Notice...

    Science.gov (United States)

    2012-01-10

    ...Notice is hereby given that a complaint was filed with the U.S. International Trade Commission on November 30, 2011, under section 337 of the Tariff Act of 1930, as amended, 19 U.S.C. 1337, on behalf of Freescale Semiconductor, Inc. of Austin, Texas. The complaint alleges violations of section 337 based upon the importation into the United States, the sale for importation, and the sale within the United States after importation of certain integrated circuits, chipsets, and products containing same including televisions by reason of infringement of certain claims of U.S. Patent No. 5,467,455 (``the `455 patent''). The complaint further alleges that an industry in the United States exists as required by subsection (a)(2) of section 337. The complainant requests that the Commission institute an investigation and, after the investigation, issue an exclusion order and cease and desist orders.

  17. Analytic device including nanostructures

    KAUST Repository

    Di Fabrizio, Enzo M.; Fratalocchi, Andrea; Totero Gongora, Juan Sebastian; Coluccio, Maria Laura; Candeloro, Patrizio; Cuda, Gianni

    2015-01-01

    A device for detecting an analyte in a sample comprising: an array including a plurality of pixels, each pixel including a nanochain comprising: a first nanostructure, a second nanostructure, and a third nanostructure, wherein size of the first nanostructure is larger than that of the second nanostructure, and size of the second nanostructure is larger than that of the third nanostructure, and wherein the first nanostructure, the second nanostructure, and the third nanostructure are positioned on a substrate such that when the nanochain is excited by an energy, an optical field between the second nanostructure and the third nanostructure is stronger than an optical field between the first nanostructure and the second nanostructure, wherein the array is configured to receive a sample; and a detector arranged to collect spectral data from a plurality of pixels of the array.

  18. Saskatchewan resources. [including uranium

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    The production of chemicals and minerals for the chemical industry in Saskatchewan are featured, with some discussion of resource taxation. The commodities mentioned include potash, fatty amines, uranium, heavy oil, sodium sulfate, chlorine, sodium hydroxide, sodium chlorate and bentonite. Following the successful outcome of the Cluff Lake inquiry, the uranium industry is booming. Some developments and production figures for Gulf Minerals, Amok, Cenex and Eldorado are mentioned.

  19. Being Included and Excluded

    DEFF Research Database (Denmark)

    Korzenevica, Marina

    2016-01-01

    Following the civil war of 1996–2006, there was a dramatic increase in the labor mobility of young men and the inclusion of young women in formal education, which led to the transformation of the political landscape of rural Nepal. Mobility and schooling represent a level of prestige that rural...... politics. It analyzes how formal education and mobility either challenge or reinforce traditional gendered norms which dictate a lowly position for young married women in the household and their absence from community politics. The article concludes that women are simultaneously excluded and included from...... community politics. On the one hand, their mobility and decision-making powers decrease with the increase in the labor mobility of men and their newly gained education is politically devalued when compared to the informal education that men gain through mobility, but on the other hand, schooling strengthens...

  20. System Design Description for the TMAD Code

    International Nuclear Information System (INIS)

    Finfrock, S.H.

    1995-01-01

    This document serves as the System Design Description (SDD) for the TMAD Code System, which includes the TMAD code and the LIBMAKR code. The SDD provides a detailed description of the theory behind the code, and the implementation of that theory. It is essential for anyone who is attempting to review or modify the code or who otherwise needs to understand the internal workings of the code. In addition, this document includes, in Appendix A, the System Requirements Specification for the TMAD System

  1. Olkiluoto site description 2011

    International Nuclear Information System (INIS)

    2012-12-01

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties

  2. Olkiluoto site description 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-12-15

    This fourth version of the Olkiluoto Site Report, produced by the OMTF (Olkiluoto Modelling Task Force), updates the Olkiluoto Site Report 2008 with the data and knowledge obtained up to December 2010. A descriptive model of the site (the Site Descriptive Model, SDM), i.e. a model describing the geological and hydrogeological structure of the site, properties of the bedrock and the groundwater and its flow, and the associated interacting processes and mechanisms. The SDM is divided into six parts: surface system, geology, rock mechanics, hydrogeology, hydrogeochemistry and transport properties.

  3. Descriptive data analysis.

    Science.gov (United States)

    Thompson, Cheryl Bagley

    2009-01-01

    This 13th article of the Basics of Research series is first in a short series on statistical analysis. These articles will discuss creating your statistical analysis plan, levels of measurement, descriptive statistics, probability theory, inferential statistics, and general considerations for interpretation of the results of a statistical analysis.

  4. Osiris reactor descriptive report

    International Nuclear Information System (INIS)

    1976-03-01

    OSIRIS is a swimming pool reactor of 70 MW thermal power. Its main purpose is the irradiation of reactor materials in high neutron flux. A description is given of the air conditioning, ventilation, and radioactive gas removal system. (R.L.)

  5. Plot Description (PD)

    Science.gov (United States)

    Robert E. Keane

    2006-01-01

    The Plot Description (PD) form is used to describe general characteristics of the FIREMON macroplot to provide ecological context for data analyses. The PD data characterize the topographical setting, geographic reference point, general plant composition and cover, ground cover, fuels, and soils information. This method provides the general ecological data that can be...

  6. Fractal description of fractures

    International Nuclear Information System (INIS)

    Lung, C.W.

    1991-06-01

    Recent studies on the fractal description of fractures are reviewed. Some problems on this subject are discussed. It seems hopeful to use the fractal dimension as a parameter for quantitative fractography and to apply fractal structures to the development of high toughness materials. (author). 28 refs, 7 figs

  7. Tore Supra: technical description

    International Nuclear Information System (INIS)

    1985-08-01

    This report is aimed, after a brief recall of physics and technologic perspectives of Tore Supra, at giving a detailed description of the basic machine; details of each component are defined. Volume 1 is specifically concerned with the general aspects of Tore Supra and the toroidal field system [fr

  8. The transportation operations system: A description

    International Nuclear Information System (INIS)

    Best, R.E.; Danese, F.L.; Dixon, L.D.; Peterson, R.W.; Pope, R.B.

    1990-01-01

    This paper presents a description of the system for transporting radioactive waste that may be deployed to accomplish the assigned system mission, which includes accepting spent nuclear fuel (SNF) and high-level radioactive waste (HLW) from waste generator sites and transporting them to the FWMS destination facilities. The system description presented here contains, in part, irradiated fuel and waste casks, ancillary equipments, truck, rail, and barge transporters, cask and vehicle traffic management organizations, maintenance facilities, and other operations elements. The description is for a fully implemented system, which is not expected to be achieved, however, until several years after initial operations. 6 figs

  9. Multidimensional nonlinear descriptive analysis

    CERN Document Server

    Nishisato, Shizuhiko

    2006-01-01

    Quantification of categorical, or non-numerical, data is a problem that scientists face across a wide range of disciplines. Exploring data analysis in various areas of research, such as the social sciences and biology, Multidimensional Nonlinear Descriptive Analysis presents methods for analyzing categorical data that are not necessarily sampled randomly from a normal population and often involve nonlinear relations. This reference not only provides an overview of multidimensional nonlinear descriptive analysis (MUNDA) of discrete data, it also offers new results in a variety of fields. The first part of the book covers conceptual and technical preliminaries needed to understand the data analysis in subsequent chapters. The next two parts contain applications of MUNDA to diverse data types, with each chapter devoted to one type of categorical data, a brief historical comment, and basic skills peculiar to the data types. The final part examines several problems and then concludes with suggestions for futu...

  10. TMACS system description

    International Nuclear Information System (INIS)

    Scaief, C.C.

    1995-01-01

    This document provides a description of the Tank Monitor and Control System (TMACS). It is intended as an introduction for those persons unfamiliar with the system as well as a reference document for the users, maintenance personnel, and system designers. In addition to describing the system, the document outlines the associated drawing documentation, provides maintenance and spare parts information, and discusses other TMACS documents that provide additional detail

  11. Input description for BIOPATH

    International Nuclear Information System (INIS)

    Marklund, J.E.; Bergstroem, U.; Edlund, O.

    1980-01-01

    The computer program BIOPATH describes the flow of radioactivity within a given ecosystem after a postulated release of radioactive material and the resulting dose for specified population groups. The present report accounts for the input data necessary to run BIOPATH. The report also contains descriptions of possible control cards and an input example as well as a short summary of the basic theory.(author)

  12. XML Diagnostics Description Standard

    International Nuclear Information System (INIS)

    Neto, A.; Fernandes, H.; Varandas, C.; Lister, J.; Yonekawa, I.

    2006-01-01

    A standard for the self-description of fusion plasma diagnostics will be presented, based on the Extensible Markup Language (XML). The motivation is to maintain and organise the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money when problems arises. Since there is no existing standard to organise this kind of information, every Association stores and organises each experiment in different ways. This can lead to severe problems when the organisation schema is poorly documented or written in national languages. The exchange of scientists, researchers and engineers between laboratories is a common practice nowadays. Sometimes they have to install new diagnostics or to update existing ones and frequently they lose a great deal of time trying to understand the currently installed system. The most common problems are: no documentation available; the person who understands it has left; documentation written in the national language. Standardisation is the key to solving all the problems mentioned. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalisation (information at least in the native language and in English), a common XML schema will be proposed. This paper will also discuss an extension of these ideas to the self-description of ITER plant systems, since the problems will be identical. (author)

  13. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    S. Roy

    2004-06-24

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

  14. Subject categories and scope descriptions

    International Nuclear Information System (INIS)

    2002-01-01

    This document is one in a series of publications known as the ETDE/INIS Joint Reference Series. It defines the subject categories and provides the scope descriptions to be used for categorization of the nuclear literature for the preparation of INIS and ETDE input by national and regional centres. Together with the other volumes of the INIS Reference Series it defines the rules, standards and practices and provides the authorities to be used in the International Nuclear Information System and ETDE. A complete list of the volumes published in the INIS Reference Series may be found on the inside front cover of this publication. This INIS/ETDE Reference Series document is intended to serve two purposes: to define the subject scope of the International Nuclear Information System (INIS) and the Energy Technology Data Exchange (ETDE) and to define the subject classification scheme of INIS and ETDE. It is thus the guide to the inputting centres in determining which items of literature should be reported, and in determining where the full bibliographic entry and abstract of each item should be included in INIS or ETDE database. Each category is identified by a category code consisting of three alphanumeric characters. A scope description is given for each subject category. The scope of INIS is the sum of the scopes of all the categories. With most categories cross references are provided to other categories where appropriate. Cross references should be of assistance in finding the appropriate category; in fact, by indicating topics that are excluded from the category in question, the cross references help to clarify and define the scope of the category to which they are appended. A Subject Index is included as an aid to subject classifiers, but it is only an aid and not a means for subject classification. It facilitates the use of this document, but is no substitute for the description of the scope of the subject categories

  15. ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Roy, S.

    2004-01-01

    The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F andOR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures

  16. Converting Taxonomic Descriptions to New Digital Formats

    Directory of Open Access Journals (Sweden)

    Hong Cui

    2008-01-01

    Full Text Available Abstract.--The majority of taxonomic descriptions is currently in print format. The majority of digital descriptions are in formats such as DOC, HTML, or PDF and for human readers. These formats do not convey rich semantics in taxonomic descriptions for computer-aided process. Newer digital formats such as XML and RDF accommodate semantic annotations that allow computers to process the rich semantics on human's behalf, thus open up opportunities for a wide range of innovative usages of taxonomic descriptions, such as searching in more precise and flexible ways, integrating with gnomic and geographic information, generating taxonomic keys automatically, and text data mining and information visualization etc. This paper discusses the challenges in automated conversion of multiple collections of descriptions to XML format and reports an automated system, MARTT. MARTT is a machine-learning system that makes use of training examples to tag new descriptions into XML format. A number of utilities are implemented as solutions to the challenges. The utilities are used to reduce the effort for training example preparation, to facilitate the creation of a comprehensive schema, and to predict system performance on a new collection of descriptions. The system has been tested with several plant and alga taxonomic publications including Flora of China and Flora of North America.

  17. ELECTRICAL POWER SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M. Maniyar

    2004-06-22

    The purpose of this revision of the System Description Document (SDD) is to establish requirements that drive the design of the electrical power system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience are design engineers. This type of SDD leads and follows the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. This SDD follows the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to this system are obtained from ''Project Functional and Operational Requirements'' (F&OR) (Siddoway, 2003). Other requirements to support the design process have been taken from higher level requirements documents such as ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), the fire hazards analyses, and the preclosure safety analysis. The above mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canori and Leitner 2003) requirements. This SDD includes several appendices with supporting information. Appendix B lists key system charts, diagrams, drawings, and lists; and Appendix C is a list of system procedures.

  18. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    L.L. Swanson

    2005-01-01

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F andOR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts, diagrams, drawings, lists and additional supporting information; and Appendix C is a list of

  19. Evalutive Descriptions of Art

    Directory of Open Access Journals (Sweden)

    Nataša Lah

    2016-01-01

    Full Text Available Taking into account the fact that, throughout history, certain artworks have been considered as “worth of watching” (according to the Greek etymon ἀξιοϑέατος / aksioteatos, preservation, or theorizing, while others were not, one is led to investigate the various types of evaluative descriptions. Those artworks that are more valuable than others, or simply valuable in themselves on the basis of rather specific features, have always represented the paradigmatic model for the evaluator, thus revealing the identitary nature of value as different from one epoch to another. Our aim has been to discern, with regard to this starting point, the way in which the process of evaluating artworks fits the general matrix of the universal theory of value, with its clearly distinguished levels of evaluation, beginning with value descriptions, continuing through the features of evaluation or abstract qualities of values extracted from these descriptions, and ending with value norms or systems of accepted generalizations in evaluation. Value standpoints in such an evaluation matrix represent dispositions or preferences in procedures, which reflect the norms or signifying concepts of the time. Corresponding procedures, or applications of the hierarchicized signification of artworks, are manifested in all known forms of artwork assessment: attribution, institutionalization, and setting of priorities in terms of exhibition, conservation, acquisition, restoration, and so on. Research in the history of European art-historical ideas has corroborated the hypothesis that, prior to the late 18th century, clear normative patterns were applied when it came to the evaluation of artworks. However, with the emergence of early Romanticism, this could no longer be done in the traditional way. Before the period in question, visual art was created (regardless of some stylistic discrepancies between individual authors and classified according to well-defined thematic

  20. Metaphorical descriptions of wrongdoers

    Directory of Open Access Journals (Sweden)

    Dryll Ewa Marta

    2017-10-01

    Full Text Available What is a metaphoric picture of an evil person made of? In a study devoted to the development of the ability to use metaphorical descriptions of humans, the semantic fields of four target metaphors - Human-Swamp, Human-Snake, Human-Knife, and Human-Nettle - were established and compared. Subjects (365 young adults were asked to decipher the metaphors’ meanings. The results were obtained mainly by qualitative analysis, with frequency analysis of clusters containing synonymous meanings. The results indicate that when creating imaginary characteristics of evil people, young adults seem to be more concerned about the possibility of suffering verbal harassment (most commonly: vulgarity, mockery, gossip, jeering than the threat of actual physical assault. The results may prove useful for developmental comparisons.

  1. Polemic and Descriptive Negations

    DEFF Research Database (Denmark)

    Horslund, Camilla Søballe

    2011-01-01

    to semantics and pragmatics, negations can be used in three different ways, which gives rise to a typology of three different types of negations: 1) the descriptive negation, 2) the polemic negation, and 3) the meta-linguistic negation (Nølke 1999, 4). This typology illuminates the fact that the negation...... common in certain social context or genres, while polemic negations are more likely to come up in other genres and social settings. Previous studies have shown a relation between articulatory prominence and register, which may further inform the analysis. Hence, the paper investigates how articulatory...... prominence and register may either work in concert or oppose each other with respect to the cues they provide for the interpretation....

  2. Site descriptive modelling - strategy for integrated evaluation

    International Nuclear Information System (INIS)

    Andersson, Johan

    2003-02-01

    The current document establishes the strategy to be used for achieving sufficient integration between disciplines in producing Site Descriptive Models during the Site Investigation stage. The Site Descriptive Model should be a multidisciplinary interpretation of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and ecosystems using site investigation data from deep bore holes and from the surface as input. The modelling comprise the following iterative steps, evaluation of primary data, descriptive and quantitative modelling (in 3D), overall confidence evaluation. Data are first evaluated within each discipline and then the evaluations are checked between the disciplines. Three-dimensional modelling (i.e. estimating the distribution of parameter values in space and its uncertainty) is made in a sequence, where the geometrical framework is taken from the geological model and in turn used by the rock mechanics, thermal and hydrogeological modelling etc. The three-dimensional description should present the parameters with their spatial variability over a relevant and specified scale, with the uncertainty included in this description. Different alternative descriptions may be required. After the individual discipline modelling and uncertainty assessment a phase of overall confidence evaluation follows. Relevant parts of the different modelling teams assess the suggested uncertainties and evaluate the feedback. These discussions should assess overall confidence by, checking that all relevant data are used, checking that information in past model versions is considered, checking that the different kinds of uncertainty are addressed, checking if suggested alternatives make sense and if there is potential for additional alternatives, and by discussing, if appropriate, how additional measurements (i.e. more data) would affect confidence. The findings as well as the modelling results are to be documented in a Site Description

  3. Description of the new version 4.0 of the tritium model UFOTRI including user guide

    International Nuclear Information System (INIS)

    Raskob, W.

    1993-08-01

    In view of the future operation of fusion reactors the release of tritium may play a dominant role during normal operation as well as after accidents. Because of its physical and chemical properties which differ significantly from those of other radionuclides, the model UFOTRI for assessing the radiological consequences of accidental tritium releases has been developed. It describes the behaviour of tritium in the biosphere and calculates the radiological impact on individuals and the population due to the direct exposure and by the ingestion pathways. Processes such as the conversion of tritium gas into tritiated water (HTO) in the soil, re-emission after deposition and the conversion of HTO into organically bound tritium, are considered. The use of UFOTRI in its probabilistic mode shows the spectrum of the radiological impact together with the associated probability of occurrence. A first model version was established in 1991. As the ongoing work on investigating the main processes of the tritium behaviour in the environment shows up new results, the model has been improved in several points. The report describes the changes incorporated into the model since 1991. Additionally provides the up-dated user guide for handling the revised UFOTRI version which will be distributed to interested organizations. (orig.) [de

  4. New records of Brazilian cicadas including the description of a new species (Hemiptera: Cicadoidea, Cicadidae).

    Science.gov (United States)

    Sanborn, Allen F

    2008-01-01

    A new species of Proarna Stål is described from southern Brazil. Proarna gianucai sp. nov. is distinguished by its coloration and genitalia. The species inhabits coastal dune environments and is associated with the perennial grass Panicum racemosum (P. Beauv.) Spreng. Adults are active from December to March. The first records of Carineta durantoni Boulard, Carineta gemella Boulard, Carineta pilifera Walker, Fidicina christinae Boulard & Martinelli, Fidicina torresi Boulard & Martinellli, Fidicinoides determinata (Walker), Fidicinoides distanti (Goding), Fidicinoides glauca (Goding), Majeorona truncata Goding, and Zammara columbia Distant for Brazil are provided. The new species and new records bring the total cicada diversity of Brazil to 146 species.

  5. Some preliminary notes on Surinam Sting Rays, including the description of a new species

    NARCIS (Netherlands)

    Boeseman, M.

    1948-01-01

    In Dr. D. C. Geijskes' collection of Surinam fishes, mentioned in my previous paper on this subject (Boeseman, 1948), I found six specimens belonging to the so-called "sting rays" (Dasyatidae), representing three different species, and all very interesting in some respects. I. Dasyatis schmardae

  6. SNF AGING SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    L.L. Swanson

    2005-04-06

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF) aging system and associated bases, which will allow the design effort to proceed. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in the SDD reflects the current results of the design process. Throughout this SDD, the term aging cask applies to vertical site-specific casks and to horizontal aging modules. The term overpack is a vertical site-specific cask that contains a dual-purpose canister (DPC) or a disposable canister. Functional and operational requirements applicable to this system were obtained from ''Project Functional and Operational Requirements'' (F&OR) (Curry 2004 [DIRS 170557]). Other requirements that support the design process were taken from documents such as ''Project Design Criteria Document'' (PDC) (BSC 2004 [DES 171599]), ''Site Fire Hazards Analyses'' (BSC 2005 [DIRS 172174]), and ''Nuclear Safety Design Bases for License Application'' (BSC 2005 [DIRS 171512]). The documents address requirements in the ''Project Requirements Document'' (PRD) (Canori and Leitner 2003 [DIRS 166275]). This SDD includes several appendices. Appendix A is a Glossary; Appendix B is a list of key system charts

  7. Fusion Engineering Device. Volume II. Design description

    International Nuclear Information System (INIS)

    1981-10-01

    This volume summarizes the design of the FED. It includes a description of the major systems and subsystems, the supporting plasma design analysis, a projected device cost and associated construction schedule, and a description of the facilities to house and support the device. This effort represents the culmination of the FY81 studies conducted at the Fusion Engineering Design Center (FEDC). Unique in these design activities has been the collaborative involvement of the Design Center personnel and numerous resource physicists from the fusion community who have made significant contributions in the physics design analysis as well as the physics support of the engineering design of the major FED systems and components

  8. Olkiluoto biosphere description 2006

    International Nuclear Information System (INIS)

    Haapanen, R.; Aro, L.; Ilvesniemi, H.; Kareinen, T.; Kirkkala, T.; Mykrae, S.; Turkki, H.; Lahdenperae, A.-M.; Ikonen, A.T.K.

    2007-02-01

    This report summarises the current knowledge of the biosphere of Olkiluoto, and it is the first Biosphere Description Report. The elements considered were climate, topography, land use, overburden, terrestrial vegetation and fauna and sea flora, fauna and water. The principal aim was to present a synthesis of the present state (now to 2020) and the main features of past evolution of the biosphere at the site using currently available data. The lack of site specific parameters and their importance was discussed. Conceptual ecosystem models are presented for land and sea. Currently available data made it possible to calculate the biomass of the terrestrial vegetation and further convert it to carbon. In the case of terrestrial animals, preliminary figures are given for moose alone due to lack of sitespecific data. For the same reason, the sea ecosystem model was not quantified within this work. The ecosystems on Olkiluoto do not deviate from the surrounding areas. Since mires are few on Olkiluoto, forests are the most important land ecosystem. However, coastal areas are the transition zones between land and sea, and also potential sites for deep groundwater discharge. The major interest concerning aquatic ecosystems was laid on four future lakes potentially developing from the sea due to the land up-lift. Current sea sediments near Olkiluoto are future land areas, and thus very important. Spatially, the forest ecosystems of Olkiluoto are now most comprehensively covered, while the temporal coverage is highest in sea ecosystems. Lack of data is greatest in terrestrial fauna and sea sediments. During this work, the system boundaries were crossed and the use of data over disciplines was started. The data were mostly in agreement, but some discrepancies were detected. To solve these, and to supplement the existing data, some recommendations were given. (orig.)

  9. Description of nuclear properties

    International Nuclear Information System (INIS)

    Faessler, A.

    1991-01-01

    The lectures want to give a survey about new developments in the description of nuclei. In a first chapter we try to derive nuclear properties from the basis theory of quantum chromodynamics. This is not rigorously possible. There are still many cracks in the bridge between QCD and nuclear structure. The basic ingredient for nuclear structure calculations is the nucleon-nucleon interaction. We shall discuss the nucleon-nucleon interaction in a quark model. In a further chapter we discuss the way to come from a bare nucleon-nucleon interaction in free space to an effective nucleon-nucleon interaction in a limited model space for nuclear structure calculations. Such nuclear structure calculations can be done as shell model calculations. But they are due to the large number of configurations limited to light nuclei. We discuss possibilities (MONSTER and VAMPIR) to enlarge the model space for medium heavy and heavy nuclei. As the example of the low lying isovector 1 + states we discuss collective models (Bohr - Mottelson Model, interacting Boson Model) with proton and neutron degrees of freedom. The same states can also be described microscopically with the Quasi-Particle Random Phase Approximation (QRPA). We discuss the removal of spurious states in RPA. We also discuss the calculation of form factors and compare with inelastic electron scattering data. Finally we apply QRPA to the double-beta decay. Grand unified models predict, that the neutrino is identical with his antiparticle, that it has a finite mass and a weak right-handed interaction. If these properties are found the standard model of the strong and the electro-weak interaction can not be correct. Presently we can only derive from lower limits of the half lives of neutrinoless double-beta decays upper limits of the neutrino mass and of the right-handedness of the weak interaction and lower limits of the mass of the right handed heavy vector boson, if a specific grand unified model is given. (author)

  10. Employing Picture Description to Assess the Students' Descriptive Paragraph Writing

    Directory of Open Access Journals (Sweden)

    Ida Ayu Mega Cahyani

    2018-03-01

    Full Text Available Writing is considered as an important skill in learning process which is needed to be mastered by the students. However, in teaching learning process at schools or universities, the assessment of writing skill is not becoming the focus of learning process and the assessment is administered inappropriately. In this present study, the researcher undertook the study which dealt with assessing descriptive paragraph writing ability of the students through picture description by employing an ex post facto as the research design. The present study was intended to answer the research problem dealing with the extent of the students’ achievement of descriptive paragraph writing ability which is assessed through picture description. The samples under the study were 40 students determined by means of random sampling technique with lottery system. The data were collected through administering picture description as the research instrument. The obtained data were analyzed by using norm-reference measure of five standard values. The results of the data analysis showed that there were 67.50% samples of the study were successful in writing descriptive paragraph, while there were 32.50% samples were unsuccessful in writing descriptive paragraph which was assessed by administering picture description test

  11. Content of system design descriptions

    International Nuclear Information System (INIS)

    1998-10-01

    A System Design Description (SDD) describes the requirements and features of a system. This standard provides guidance on the expected technical content of SDDs. The need for such a standard was recognized during efforts to develop SDDs for safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Existing guidance related to the corresponding documents in other industries is generally not suitable to meet the needs of DOE nuclear facilities. Across the DOE complex, different contractors have guidance documents, but they vary widely from site to site. While such guidance documents are valuable, no single guidance document has all the attributes that DOE considers important, including a reasonable degree of consistency or standardization. This standard is a consolidation of the best of the existing guidance. This standard has been developed with a technical content and level of detail intended to be most applicable to safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Notwithstanding that primary intent, this standard is recommended for other systems at such facilities, especially those that are important to achieving the programmatic mission of the facility. In addition, application of this standard should be considered for systems at other facilities, including non-nuclear facilities, on the basis that SDDs may be beneficial and cost-effective

  12. Waste Management Systems Requirements and Descriptions (SRD)

    International Nuclear Information System (INIS)

    Conner, C.W.

    1986-01-01

    The Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a system for the management of high-level radioactive waste and spent fuel in accordance with the Nuclear Waste Policy Act of 1982. The Waste Management system requirements and description document is the program-level technical baseline document. The requirements include the functions that must be performed in order to achieve the system mission and performance criteria for those functions. This document covers only the functional requirements of the system; it does not cover programmatic or procedural requirements pertaining to the processes of designing, siting and licensing. The requirements are largely based on the Nuclear Waste Policy Act of 1982, Environmental Protection Agency standards, Nuclear Regulatory Commission regulations, and DOE orders and guidance. However, nothing in this document should be construed as to relieve the DOE or its contractors from their responsibilities to comply with applicable statutes, regulations, and standards. This document also provides a brief description of the system being developed to meet the requirements. In addition to the described ''authorized system,'' a system description is provided for an ''improved-performance system'' which would include a monitored retrievable storage (MRS) facility. In the event that an MRS facility is approved by Congress, the improved-performance system will become the reference system. Neither system description includes Federal Interim Storage (FIS) capabilities. Should the need for FIS be identified, it will be included as an additional system element. The descriptions are focused on the interfaces between the system elements, rather than on the detail of the system elements themselves

  13. Dual descriptions of supersymmetry breaking

    International Nuclear Information System (INIS)

    Intrilligator, K.; Thomas, S.

    1996-08-01

    Dynamical supersymmetry breaking is considered in models which admit descriptions in terms of electric, confined, or magnetic degrees of freedom in various limits. In this way, a variety of seemingly different theories which break supersymmetry are actually interrelated by confinement or duality. Specific examples are given in which there are two dual descriptions of the supersymmetry breaking ground state

  14. Quality Assurance Requirements and Description

    International Nuclear Information System (INIS)

    Ram Murthy

    2002-01-01

    The Quality Assurance Requirements and Description (QARD) is the principal Quality Assurance (QA) document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the QA program [INTRODUCTION :1p2s (NOT A REQUIREMENT)]. The QARD contains regulatory requirements and program commitments necessary for the development of an effective QA program [INTRODUCTION :1p3s (NOT A REQUIREMENT)]. Implementing documents must be based on, and be consistent with the QARD. The QARD applies to the following: (1) Acceptance of spent nuclear fuel and high-level waste. (2) Transport of spent nuclear fuel and high-level waste. (3) Storage of spent nuclear fuel through receipt of storage cask certification or a facility operating license. (4) Monitored Geologic Repository, including the site characterization activities [Exploratory Studies Facility (ESF) and surface based testing], through receipt of an operating license. (5) High-level waste form development through qualification, production, and acceptance. (6) Characterization of DOE spent nuclear fuel, and conditioning through acceptance of DOE spent nuclear fuel. Section 2.0, Quality Assurance Program, defines in greater detail criteria for determining work subject to the QARD

  15. EP1000 passive plant description

    International Nuclear Information System (INIS)

    Saiu, G.

    1999-01-01

    In 1994, a group of European Utilities, together with Westinghouse and its Industrial Partner GENESI (an Italian consortium including ANSALDO and FIAT), initiated a program designated EPP (European Passive Plant) to evaluate Westinghouse Passive Nuclear Plant Technology for application in Europe. In Phase I of the European Passive Plant Program which was completed in 1996, a 1000 MWe passive plant reference design (EP1000) was established which conforms to the European Utility Requirements (EUR) and is expected to meet the European Safety Authorities requirements. Phase 2 of the program was initiated in 1997 with the objective of developing the Nuclear Island design details and performing supporting analyses to start development of Safety Case Report (SCR) for submittal to European Licensing Authorities. The first part of Phase 2, 'Design Definition' phase (Phase 2A) will be completed at the end of 1998, the main efforts being design definition of key systems and structures, development of the Nuclear Island layout, and performing preliminary safety analyses to support design efforts. The second part, 'Phase 2B', includes both the analyses and evaluations required to demonstrate the adequacy of the design, and to support the preparation of Safety Case Report. The second part of Phase 2 of the program will start at the beginning of 1999 and will be completed in the 2001. Incorporation of the EUR has been a key design requirement for the EP1000 from the beginning of the program. Detailed design solutions to meet the EUR have been defined and the safety approach has also been developed based on the EUR guidelines. This paper integrates and updates the plant description reported in the IAEA TECDOC-968. The most significant developments of the EP1000 plant design during Phase 2A of the EPP program are described and reference is made to the key design requirements set by the EUR Rev. B document. (author)

  16. WP EMPLACEMENT CONTROL AND COMMUNICATION EQUIPMENT DESCRIPTIONS

    International Nuclear Information System (INIS)

    Raczka, N.T.

    1997-01-01

    The objective and scope of this document are to list and briefly describe the major control and communication equipment necessary for waste package emplacement at the proposed nuclear waste repository at Yucca Mountain. Primary performance characteristics and some specialized design features of the required equipment are explained and summarized in the individual subsections of this document. This task was evaluated in accordance with QAP-2-0 and found not to be quality affecting. Therefore, this document was prepared in accordance with NAP-MG-012. The following control and communication equipment are addressed in this document: (1) Programmable Logic Controllers (PLC's); (2) Leaky Feeder Radio Frequency Communication Equipment; (3) Slotted Microwave guide Communication Equipment; (4) Vision Systems; (5) Radio Control Equipment; and (6) Enclosure Cooling Systems

  17. Health Topic XML File Description

    Science.gov (United States)

    ... this page: https://medlineplus.gov/xmldescription.html Health Topic XML File Description: MedlinePlus To use the sharing ... information categories assigned. Example of a Full Health Topic Record A record for a MedlinePlus health topic ...

  18. ATLAS Facility Description Report

    International Nuclear Information System (INIS)

    Kang, Kyoung Ho; Moon, Sang Ki; Park, Hyun Sik; Cho, Seok; Choi, Ki Yong

    2009-04-01

    A thermal-hydraulic integral effect test facility, ATLAS (Advanced Thermal-hydraulic Test Loop for Accident Simulation), has been constructed at KAERI (Korea Atomic Energy Research Institute). The ATLAS has the same two-loop features as the APR1400 and is designed according to the well-known scaling method suggested by Ishii and Kataoka to simulate the various test scenarios as realistically as possible. It is a half-height and 1/288-volume scaled test facility with respect to the APR1400. The fluid system of the ATLAS consists of a primary system, a secondary system, a safety injection system, a break simulating system, a containment simulating system, and auxiliary systems. The primary system includes a reactor vessel, two hot legs, four cold legs, a pressurizer, four reactor coolant pumps, and two steam generators. The secondary system of the ATLAS is simplified to be of a circulating loop-type. Most of the safety injection features of the APR1400 and the OPR1000 are incorporated into the safety injection system of the ATLAS. In the ATLAS test facility, about 1300 instrumentations are installed to precisely investigate the thermal-hydraulic behavior in simulation of the various test scenarios. This report describes the scaling methodology, the geometric data of the individual component, and the specification and the location of the instrumentations in detail

  19. GARFEM input deck description

    Energy Technology Data Exchange (ETDEWEB)

    Zdunek, A.; Soederberg, M. (Aeronautical Research Inst. of Sweden, Bromma (Sweden))

    1989-01-01

    The input card deck for the finite element program GARFEM version 3.2 is described in this manual. The program includes, but is not limited to, capabilities to handle the following problems: * Linear bar and beam element structures, * Geometrically non-linear problems (bar and beam), both static and transient dynamic analysis, * Transient response dynamics from a catalog of time varying external forcing function types or input function tables, * Eigenvalue solution (modes and frequencies), * Multi point constraints (MPC) for the modelling of mechanisms and e.g. rigid links. The MPC definition is used only in the geometrically linearized sense, * Beams with disjunct shear axis and neutral axis, * Beams with rigid offset. An interface exist that connects GARFEM with the program GAROS. GAROS is a program for aeroelastic analysis of rotating structures. Since this interface was developed GARFEM now serves as a preprocessor program in place of NASTRAN which was formerly used. Documentation of the methods applied in GARFEM exists but is so far limited to the capacities in existence before the GAROS interface was developed.

  20. Land reclamation program description

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-05-01

    The Land Reclamation Program will address the need for coordinated applied and basic research into the physical and ecological problems of land reclamation, and advance the development of cost-effective techniques for reclaiming and rehabilitating mined coal land to productive end uses. The purpose of this new program is to conduct integrated research and development projects focused on near- and long-term reclamation problems in all major U.S. coal resource regions including Alaska and to coordinate, evaluate, and disseminate the results of related studies conducted at other research institutions. The activities of the Land Reclamation Laboratory program will involve close cooperation with industry and focus on establishing a comprehensive field and laboratory effort. Research demonstration sites will be established throughout the United States to address regional and site-specific problems. Close cooperation with related efforts at academic institutions and other agencies, to transfer pertinent information and avoid duplication of effort, will be a primary goal of the program. The major effort will focus on the complete coal extraction/reclamation cycle where necessary to develop solutions to ameliorating the environmental impacts of coal development. A long-range comprehensive national reclamation program will be established that can schedule and prioritize research activities in all of the major coal regions. A fully integrated data management system will be developed to store and manage relevant environmental and land use data. Nine research demonstration sites have been identified.

  1. Salt Block II: description and results

    International Nuclear Information System (INIS)

    Hohlfelder, J.J.

    1980-06-01

    A description of and results from the Salt Block II experiment, which involved the heating of and measurement of water transport within a large sample of rock salt, are presented. These results include the measurement of water released into a heated borehole in the sample as well as measured temperatures within the salt. Measured temperatures are compared with the results of a mathematical model of the experiment

  2. TINTE. Nuclear calculation theory description report

    Energy Technology Data Exchange (ETDEWEB)

    Gerwin, H.; Scherer, W.; Lauer, A. [Forschungszentrum Juelich GmbH (DE). Institut fuer Energieforschung (IEF), Sicherheitsforschung und Reaktortechnik (IEF-6); Clifford, I. [Pebble Bed Modular Reactor (Pty) Ltd. (South Africa)

    2010-01-15

    The Time Dependent Neutronics and Temperatures (TINTE) code system deals with the nuclear and the thermal transient behaviour of the primary circuit of the High-temperature Gas-cooled Reactor (HTGR), taking into consideration the mutual feedback effects in twodimensional axisymmetric geometry. This document contains a complete description of the theoretical basis of the TINTE nuclear calculation, including the equations solved, solution methods and the nuclear data used in the solution. (orig.)

  3. AREST model description

    International Nuclear Information System (INIS)

    Engel, D.W.; McGrail, B.P.

    1993-11-01

    The Office of Civilian Radioactive Waste Management and the Power Reactor and Nuclear Fuel Development Corporation of Japan (PNC) have supported the development of the Analytical Repository Source-Term (AREST) at Pacific Northwest Laboratory. AREST is a computer model developed to evaluate radionuclide release from an underground geologic repository. The AREST code can be used to calculate/estimate the amount and rate of each radionuclide that is released from the engineered barrier system (EBS) of the repository. The EBS is the man-made or disrupted area of the repository. AREST was designed as a system-level models to simulate the behavior of the total repository by combining process-level models for the release from an individual waste package or container. AREST contains primarily analytical models for calculating the release/transport of radionuclides to the lost rock that surrounds each waste package. Analytical models were used because of the small computational overhead that allows all the input parameters to be derived from a statistical distribution. Recently, a one-dimensional numerical model was also incorporated into AREST, to allow for more detailed modeling of the transport process with arbitrary length decay chains. The next step in modeling the EBS, is to develop a model that couples the probabilistic capabilities of AREST with a more detailed process model. This model will need to look at the reactive coupling of the processes that are involved with the release process. Such coupling would include: (1) the dissolution of the waste form, (2) the geochemical modeling of the groundwater, (3) the corrosion of the container overpacking, and (4) the backfill material, just to name a few. Several of these coupled processes are already incorporated in the current version of AREST

  4. Course Descriptions in Environmental Studies Part Two: Interdisciplinary Courses.

    Science.gov (United States)

    Dunlap, Riley; And Others

    1984-01-01

    Presents descriptions (syllabi, outlines, goals) of interdisciplinary environmental studies courses. Topic areas of these courses include: environmental sociology; human ecology (politics, institutions, and the environment); humans and the environment in historical perspective; environmental management; humans, hazards, and disasters; and other…

  5. Course Descriptions in Environmental Studies Part One: Historical Courses.

    Science.gov (United States)

    Hughes, Donald; And Others

    1984-01-01

    Presents descriptions (syllabi, outlines, goals) of selected environmental studies courses which approach the discipline from an historical and humanistic perspective. Areas explored in the courses include human ecology, American environmental history, environmental politics, and others. (JN)

  6. (including travel dates) Proposed itinerary

    Indian Academy of Sciences (India)

    Ashok

    31 July to 22 August 2012 (including travel dates). Proposed itinerary: Arrival in Bangalore on 1 August. 1-5 August: Bangalore, Karnataka. Suggested institutions: Indian Institute of Science, Bangalore. St Johns Medical College & Hospital, Bangalore. Jawaharlal Nehru Centre, Bangalore. 6-8 August: Chennai, TN.

  7. Resource description and access 2013 revision

    CERN Document Server

    2013-01-01

    This e-book contains the 2013 Revision of RDA: Resource Description and Access, and includes the July 2013 Update. This e-book offers links within the RDA text and the capability of running rudimentary searches of RDA, but please note that this e-book does not have the full range of content or functionality provided by the subscription product RDA Toolkit. Included: A full accumulation of RDA- the revision contains a full set of all current RDA instructions. It replaces the previous version of RDA Print as opposed to being an update packet to that version. RDA has gone through many changes sin

  8. Theory including future not excluded

    DEFF Research Database (Denmark)

    Nagao, K.; Nielsen, H.B.

    2013-01-01

    We study a complex action theory (CAT) whose path runs over not only past but also future. We show that, if we regard a matrix element defined in terms of the future state at time T and the past state at time TA as an expectation value in the CAT, then we are allowed to have the Heisenberg equation......, Ehrenfest's theorem, and the conserved probability current density. In addition,we showthat the expectation value at the present time t of a future-included theory for large T - t and large t - T corresponds to that of a future-not-included theory with a proper inner product for large t - T. Hence, the CAT...

  9. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    J.F. Beesley

    2005-04-21

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process.

  10. CANISTER HANDLING FACILITY DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Beesley. J.F.

    2005-01-01

    The purpose of this facility description document (FDD) is to establish requirements and associated bases that drive the design of the Canister Handling Facility (CHF), which will allow the design effort to proceed to license application. This FDD will be revised at strategic points as the design matures. This FDD identifies the requirements and describes the facility design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This FDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This FDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the facility. Knowledge of these requirements is essential in performing the design process. The FDD follows the design with regard to the description of the facility. The description provided in this FDD reflects the current results of the design process

  11. Fuel Handling Facility Description Document

    International Nuclear Information System (INIS)

    M.A. LaFountain

    2005-01-01

    The purpose of the facility description document (FDD) is to establish the requirements and their bases that drive the design of the Fuel Handling Facility (FHF) to allow the design effort to proceed to license application. This FDD is a living document that will be revised at strategic points as the design matures. It identifies the requirements and describes the facility design as it currently exists, with emphasis on design attributes provided to meet the requirements. This FDD was developed as an engineering tool for design control. Accordingly, the primary audience and users are design engineers. It leads the design process with regard to the flow down of upper tier requirements onto the facility. Knowledge of these requirements is essential to performing the design process. It trails the design with regard to the description of the facility. This description is a reflection of the results of the design process to date

  12. 36 CFR 1254.94 - What must my request include?

    Science.gov (United States)

    2010-07-01

    ... includes the following elements: (1) Record group number or agency of origin or, for donated historical... volume in number of pages or cubic feet. (b) The estimated amount of time (work-days) that the microfilm... who would require training (see § 1254.108(b)). (c) The number and a description of the equipment that...

  13. Device including a contact detector

    DEFF Research Database (Denmark)

    2011-01-01

    arms (12) may extend from the supporting body in co-planar relationship with the first surface. The plurality of cantilever arms (12) may extend substantially parallel to each other and each of the plurality of cantilever arms (12) may include an electrical conductive tip for contacting the area......The present invention relates to a probe for determining an electrical property of an area of a surface of a test sample, the probe is intended to be in a specific orientation relative to the test sample. The probe may comprise a supporting body defining a first surface. A plurality of cantilever...... of the test sample by movement of the probe relative to the surface of the test sample into the specific orientation.; The probe may further comprise a contact detector (14) extending from the supporting body arranged so as to contact the surface of the test sample prior to any one of the plurality...

  14. Neoclassical transport including collisional nonlinearity.

    Science.gov (United States)

    Candy, J; Belli, E A

    2011-06-10

    In the standard δf theory of neoclassical transport, the zeroth-order (Maxwellian) solution is obtained analytically via the solution of a nonlinear equation. The first-order correction δf is subsequently computed as the solution of a linear, inhomogeneous equation that includes the linearized Fokker-Planck collision operator. This equation admits analytic solutions only in extreme asymptotic limits (banana, plateau, Pfirsch-Schlüter), and so must be solved numerically for realistic plasma parameters. Recently, numerical codes have appeared which attempt to compute the total distribution f more accurately than in the standard ordering by retaining some nonlinear terms related to finite-orbit width, while simultaneously reusing some form of the linearized collision operator. In this work we show that higher-order corrections to the distribution function may be unphysical if collisional nonlinearities are ignored.

  15. Manufacturer Usage Description Specification Implementation

    OpenAIRE

    Srinivasan, Kaushik

    2017-01-01

    Manufacturer Usage Description Specification (MUDS) is aframework under RFC development that aims to automate Internet access control rules for IoT devices . These access controls prevent malicious IoT devices from attacking other devices and also protect the IoT devices from being attacked by other devices.We are implementing this framework and trying to improve its security.

  16. Epsilon. A System Description Language

    DEFF Research Database (Denmark)

    Jensen, Kurt; Kyng, Morten

    This paper discusses the use of Petri nets as a semantic tool in the design of languages and in the construction and analysis of system descriptions. The topics treated are: -- Languages based on nets. -- The problem of time in nets. -- Nets and related models. -- Nets and formal semantics...

  17. Microscopic description of nuclear reactions

    International Nuclear Information System (INIS)

    Gorbatov, A.M.

    1992-01-01

    The genealogical series method has been extended to the continuous spectrum of the many-body systems. New nonlinear integral equations have been formulated to perform the microscopical description of the nuclear reactions with arbitrary number of particles. The way to solve them numerically is demonstrated

  18. Improving Published Descriptions of Germplasm.

    Science.gov (United States)

    Published descriptions of new germplasm, such as in the Journal of Plant Registrations (JPR) and, prior to mid-2007, in Crop Science, are important vehicles for allowing researchers and other interested parties to learn about such germplasm and the methods used to generate them. Launched in 2007, JP...

  19. NOAA Weather Radio - EAS Description

    Science.gov (United States)

    Non-Zero All Hazards Logo Emergency Alert Description Event Codes Fact Sheet FAQ Organization Search Search For Go NWS All NOAA Emergency Alert System (EAS) List of EAS Event Codes NWS EAS fact sheet What Management Agency (FEMA) and the NWS, implements the EAS at the federal level. The EAS is the nation's public

  20. Natural Language Description of Emotion

    Science.gov (United States)

    Kazemzadeh, Abe

    2013-01-01

    This dissertation studies how people describe emotions with language and how computers can simulate this descriptive behavior. Although many non-human animals can express their current emotions as social signals, only humans can communicate about emotions symbolically. This symbolic communication of emotion allows us to talk about emotions that we…

  1. The geometry description markup language

    International Nuclear Information System (INIS)

    Chytracek, R.

    2001-01-01

    Currently, a lot of effort is being put on designing complex detectors. A number of simulation and reconstruction frameworks and applications have been developed with the aim to make this job easier. A very important role in this activity is played by the geometry description of the detector apparatus layout and its working environment. However, no real common approach to represent geometry data is available and such data can be found in various forms starting from custom semi-structured text files, source code (C/C++/FORTRAN), to XML and database solutions. The XML (Extensible Markup Language) has proven to provide an interesting approach for describing detector geometries, with several different but incompatible XML-based solutions existing. Therefore, interoperability and geometry data exchange among different frameworks is not possible at present. The author introduces a markup language for geometry descriptions. Its aim is to define a common approach for sharing and exchanging of geometry description data. Its requirements and design have been driven by experience and user feedback from existing projects which have their geometry description in XML

  2. Description, prescription and the choice of discount rates

    International Nuclear Information System (INIS)

    Baum, Seth D.

    2009-01-01

    The choice of discount rates is a key issue in the analysis of long-term societal issues, in particular environmental issues such as climate change. Approaches to choosing discount rates are generally placed into two categories: the descriptive approach and the prescriptive approach. The descriptive approach is often justified on grounds that it uses a description of how society discounts instead of having analysts impose their own discounting views on society. This paper analyzes the common forms of the descriptive and prescriptive approaches and finds that, in contrast with customary thinking, both forms are equally descriptive and prescriptive. The prescriptions concern who has standing (i.e. who is included) in society, how the views of these individuals are measured, and how the measurements are aggregated. Such prescriptions are necessary to choose from among the many possible descriptions of how society discounts. The descriptions are the measurements made given a choice of measurement technique. Thus, the labels 'descriptive approach' and 'prescriptive approach' are deeply misleading, as analysts cannot avoid imposing their own views on society. (author)

  3. 78 FR 68861 - Certain Navigation Products, Including GPS Devices, Navigation and Display Systems, Radar Systems...

    Science.gov (United States)

    2013-11-15

    ... complaint further alleges that an industry in the United States exists as required by subsection (a)(2) of..., and 14 of the '561 patent; and claims 1-25 of the '447 patent, and whether an industry in the United... served: Garmin Ltd., M[uuml]hlentalstrasse 2, 8200 Schaffhausen, Switzerland Garmin International, Inc...

  4. Durability 2007. Injection grout investigations. Background description

    International Nuclear Information System (INIS)

    Orantie, K.; Kuosa, H.

    2008-12-01

    The aim of this project was to evaluate the durability risks of injection grouts. The investigations were done with respect to the application conditions, materials and service life requirements at the ONKALO underground research facility. The study encompassed injection grout mixtures made of ultrafine cement with and without silica fume. Some of the mixtures hade a low pH and thus a high silica fume content. The project includes a background description on durability literature, laboratory testing programme, detailed analysis of results and recommendations for selecting of ideal grout mixtures. The background description was made for the experimental study of low-pH and reference rock injection grouts as regards pore- and microstructure, strength, shrinkage/swelling and thus versatile durability properties. A summary of test methods is presented as well as examples, i.e. literature information or former test results, of expected range of results from the tests. Also background information about how the test results correlate to other material properties and mix designs is presented. Besides the report provides basic information on the pore structure of cement based materials. Also the correlation between the pore structure of cement based materials and permeability is shortly discussed. The test methods included in the background description are compressive strength, measurement of bulk drying, autogenous and chemical shrinkage and swelling, hydraulic conductivity / permeability, capillary water uptake test, mercury intrusion porosimetry (MIP) and thin section analysis. Three main mixtures with water-binder ratio of 0.8, 1.0 and 1.4 and silica fume content of 0, 15 and 40% were studied in the laboratory. Besides two extra mixtures were studied to provide additional information about the effect of varying water-dry-material ratio and silica fume content on durability. The evaluation of water tightness based on water permeability coefficient and micro cracking was

  5. On the thermodynamic description of real systems

    International Nuclear Information System (INIS)

    Bernardes, N.

    1984-01-01

    A new method of approach to the theory of the thermodynamic properties of real systems is proposed, to include interactions among the constituent particles of the system. The method consists in obtaining the entropy of a real system from the entropy of the corresponding ideal system by a translation in the internal energy and other relevant extensive variables. The usefulness of the method is displayed by application to the cases of: (i) real gases, and (ii) spin paramagnetism with interactions among spins. It is shown that this description corresponds to a generalization of the molecular field approximation. (Author) [pt

  6. Relativistic description of atomic nuclei

    International Nuclear Information System (INIS)

    Krutov, V.A.

    1985-01-01

    Papers on the relativistic description of nuclei are reviewed. The Brown and Rho ''small'' bag'' model is accepted for hardrons. Meson exchange potentials of the nucleon-nucleon interaction have been considered. Then the transition from a system of two interacting nucleons has been performed to the relativistic nucleus description as a multinucleon system on the basis of OBEP (one-boson exchange potential). The proboem of OPEP (one-pion-exchange potential) inclusion to a relativistic scheme is discussed. Simplicity of calculations and attractiveness of the Walecka model for specific computations and calculations was noted. The relativistic model of nucleons interacting through ''effective'' scalar and vector boson fields was used in the Walacka model for describing neutronaand nuclear mater matters

  7. Data Description of a System

    Directory of Open Access Journals (Sweden)

    P. Nevriva

    1996-04-01

    Full Text Available In this paper, a brief discussion on description of process by memorized data is given. The insight into the problem can offer modified views on optimal control, on data compression at communication systems with respect to information content of message, etc.The idea of process description by memorized data with different information content will be presented here on the classical case study of optimal control: the data based control algorithm (data algorithm, DA gathers data from the controlled process and derives control signal (control from data accumulated in the data base. The implementation of the DA on the ideal computer which is not limited by its speed or capacity of memory is expected for simplicity. Accuracy of the data algorithm is then given by a-priori knowledge of the task and by information exchange between the controlled process and the computer.

  8. WSNs Microseismic Signal Subsection Compression Algorithm Based on Compressed Sensing

    Directory of Open Access Journals (Sweden)

    Zhouzhou Liu

    2015-01-01

    Full Text Available For wireless network microseismic monitoring and the problems of low compression ratio and high energy consumption of communication, this paper proposes a segmentation compression algorithm according to the characteristics of the microseismic signals and the compression perception theory (CS used in the transmission process. The algorithm will be collected as a number of nonzero elements of data segmented basis, by reducing the number of combinations of nonzero elements within the segment to improve the accuracy of signal reconstruction, while taking advantage of the characteristics of compressive sensing theory to achieve a high compression ratio of the signal. Experimental results show that, in the quantum chaos immune clone refactoring (Q-CSDR algorithm for reconstruction algorithm, under the condition of signal sparse degree higher than 40, to be more than 0.4 of the compression ratio to compress the signal, the mean square error is less than 0.01, prolonging the network life by 2 times.

  9. Continuum description for jointed media

    International Nuclear Information System (INIS)

    Thomas, R.K.

    1982-04-01

    A general three-dimensional continuum description is presented for a material containing regularly spaced and approximately parallel jointing planes within a representative elementary volume. Constitutive relationships are introduced for linear behavior of the base material and nonlinear normal and shear behavior across jointing planes. Furthermore, a fracture permeability tensor is calculated so that deformation induced alterations to the in-situ values can be measured. Examples for several strain-controlled loading paths are presented

  10. Conformal description of spinning particles

    International Nuclear Information System (INIS)

    Todorov, I.T.

    1986-01-01

    This book is an introduction to the application of the conformal group to quantum field theory of particles with spin. After an introduction to the twistor representations of the conformal group of a conformally flat space-time and twistor flag manifolds with Su(2,2) orbits the classical phase space of conformal spinning particles is described. Thereafter the twistor description of classical zero mass fields is considered together with the quantization. (HSI)

  11. GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION.

    Energy Technology Data Exchange (ETDEWEB)

    PAQUETTE,D.E.; BENNETT,D.B.; DORSCH,W.R.; GOODE,G.A.; LEE,R.J.; KLAUS,K.; HOWE,R.F.; GEIGER,K.

    2002-05-31

    THE DEPARTMENT OF ENERGY ORDER 5400.1, GENERAL ENVIRONMENTAL PROTECTION PROGRAM, REQUIRES THE DEVELOPMENT AND IMPLEMENTATION OF A GROUNDWATER PROTECTION PROGRAM. THE BNL GROUNDWATER PROTECTION MANAGEMENT PROGRAM DESCRIPTION PROVIDES AN OVERVIEW OF HOW THE LABORATORY ENSURES THAT PLANS FOR GROUNDWATER PROTECTION, MONITORING, AND RESTORATION ARE FULLY DEFINED, INTEGRATED, AND MANAGED IN A COST EFFECTIVE MANNER THAT IS CONSISTENT WITH FEDERAL, STATE, AND LOCAL REGULATIONS.

  12. A hitchhiker's guide to the older literature of descriptive teratology.

    Science.gov (United States)

    Beckwith, J Bruce

    2007-12-15

    Though relatively neglected in the age of molecular biology, the older literature of teratology includes superb illustrations and descriptions of malformations, and other information of permanent value to science and medicine. Accessing that literature can be challenging, as most is in works that are rare, published in languages other than English, and not available in digital form. This article describes some valuable sources of information concerning the antiquarian literature of descriptive teratology. (c) 2007 Wiley-Liss, Inc.

  13. 40 CFR 239.4 - Narrative description of state permit program.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Narrative description of state permit program. 239.4 Section 239.4 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID... Narrative description of state permit program. The description of a state's program must include: (a) An...

  14. Recommended procedures and methodology of coal description

    Science.gov (United States)

    Chao, E.C.; Minkin, J.A.; Thompson, C.L.

    1983-01-01

    This document is the result of a workshop on coal description held for the Branch of Coal Resources of the U.S. Geological Survey in March 1982. It has been prepared to aid and encourage the field-oriented coal scientist to participate directly in petrographic coal-description activities. The objectives and past and current practices of coal description vary widely. These are briefly reviewed and illustrated with examples. Sampling approaches and techniques for collecting columnar samples of fresh coal are also discussed. The recommended procedures and methodology emphasize the fact that obtaining a good megascopic description of a coal bed is much better done in the laboratory with a binocular microscope and under good lighting conditions after the samples have been cut and quickly prepared. For better observation and cross-checking using a petrographic microscope for identification purposes, an in-place polishing procedure (requiring less than 2 min) is routinely used. Methods for using both the petrographic microscope and an automated image analysis system are also included for geologists who have access to such instruments. To describe the material characteristics of a coal bed in terms of microlithotypes or lithotypes, a new nomenclature of (V), (E), (1), (M). (S). (X1). (X2) and so on is used. The microscopic description of the modal composition of a megascopically observed lithologic type is expressed in terms of (VEIM); subscripts are used to denote the volume percentage of each constituent present. To describe a coal-bed profile, semiquantitative data (without microscopic study) and quantitative data (with microscopic study) are presented in ready-to-understand form. The average total composition of any thickness interval or of the entire coal bed can be plotted on a triangular diagram having V, E, and I+ M +S as the apices. The modal composition of any mixed lithologies such as (X1), (X2), and so on can also be plotted on such a triangular ternary diagram

  15. COG Software Architecture Design Description Document

    International Nuclear Information System (INIS)

    Buck, R.M.; Lent, E.M.

    2009-01-01

    This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

  16. Quantum logical description of microsystems

    International Nuclear Information System (INIS)

    Stachow, E.-W.

    1984-01-01

    An abstract object language with respect to single microsystems and its pragmatic foundation are considered in a systematic way. The quantum physical restrictions of local operations of a speaker lead to a propositional language which, under certain conditions, can be referred to an individual microsystem. The time dependence of the propositions according to the measuring process is discussed. Finally the language is extended to a space-time description of microsystems. Hereby relativity imposes certain constraints on the validi ty regions of propositions in space-time. Via realization, the language establishes the essential features of quantum physics in Hilbert space. (author)

  17. Neoclassical MHD descriptions of tokamak plasmas

    International Nuclear Information System (INIS)

    Callen, J.D.; Kim, Y.B.; Sundaram, A.K.

    1988-01-01

    Considerable progress has been made in extending neoclassical MHD theory and in exploring the linear instabilities, nonlinear behavior and turbulence models it implies for tokamak plasmas. The areas highlighted in this paper include: extension of the neoclassical MHD equations to include temperature-gradient and heat flow effects; the free energy and entropy evolution implied by this more complete description; a proper ballooning mode formalism analysis of the linear instabilities; a new rippling mode type instability; numerical simulation of the linear instabilities which exhibit a smooth transition from resistive ballooning modes at high collisionality to neoclassical MHD modes at low collisionality; numerical simulation of the nonlinear growth of a single helicity tearing mode; and a Direct-Interaction-Approximation model of neoclassical MHD turbulence and the anomalous transport it induces which substantially improves upon previous mixing length model estimates. 34 refs., 2 figs

  18. Integrated Project Management System description

    International Nuclear Information System (INIS)

    1994-09-01

    The Integrated Program Management System (IPMS) Description is a ''working'' document that describes the work processes of the Uranium Mill Tailings Remedial Action Project Office (UMTRA) and IPMS Group. This document has undergone many revisions since the UMTRA Project began; this revision not only updates the work processes but more clearly explains the relationships between the Project Office, contractors, and other participants. The work process flow style has been revised to better describe Project work and the relationships of participants. For each work process, more background and guidance on ''why'' and ''what is expected'' is given. For example, a description of activity data sheets has been added in the work organization and the Project performance and reporting processes, as well as additional detail about the federal budget process and funding management and improved flow charts and explanations of cost and schedule management. A chapter has been added describing the Cost Reduction/Productivity Improvement Program. The Change Control Board (CCB) procedures (Appendix A) have been updated. Project critical issues meeting (PCIM) procedures have been added as Appendix B. Budget risk assessment meeting procedures have been added as Appendix C. These appendices are written to act as stand-alone documentation for each process. As the procedures are improved and updated, the documentation can be updated separately

  19. Thermodynamical description of excited nuclei

    International Nuclear Information System (INIS)

    Bonche, P.

    1989-01-01

    In heavy ion collisions it has been possible to obtain composite systems at rather high excitation energies corresponding to temperatures of several MeV. The theoretical studies of these systems are based on concepts borrowed from thermodynamics or statistical physics, such as the temperature. In these lectures, we present the concepts of statistical physics which are involved in the physics of heavy ion as they are produced nowadays in the laboratory and also during the final stage of a supernova collapse. We do not attempt to describe the reaction mechanisms which yield such nuclear systems nor their decay by evaporation or fragmentation. We shall only study their static properties. The content of these lectures is organized in four main sections. The first one gives the basic features of statistical physics and thermodynamics necessary to understand quantum mechanics at finite temperature. In the second one, we present a study of the liquid-gas phase transition in nuclear physics. A phenomenological approach of the stability of hot nuclei follows. The microscopic point of view is proposed in the third part. Starting from the basic concepts derived in the first part, it provides a description of excited or hot nuclei which confirms the qualitative results of the second part. Furthermore it gives a full description of most properties of these nuclei as a function of temperature. Finally in the last part, a microscopic derivation of the equation of state of nuclear matter is proposed to study the collapse of a supernova core

  20. Addressing the Language Description Deficit

    Directory of Open Access Journals (Sweden)

    M. Ali Bolgiin

    2010-01-01

    Full Text Available Well-described language features are key to successful teaching and learning, especially for achieving advanced levels of proficiency. Other measures, such as simply increasing the number of reading and listening passages in a language program alone are not enough to bring the student to a higher level in a given skill. In fact, even being present in the target culture does not suffice. Angelelli and Degueldre (2002 argue that at advanced levels, even spending time in a country where the language is spoken is not necessarily sufficient for learners: "They do not need just exposure; they need answers to questions and explanations that they can rarely get by simply being immersed in a language/ culture." Less commonly taught languages (LCTLs lack descriptions that have such answers and explanations (cf. Fotos, 2002. It is argued in this paper that corpuslinguistic analyses help to provide actual usage-based, rather than intuition-based, descriptions and explanations of language features. Such approach is illustrated through English and Turkish examples.

  1. Archival Descriptions from the National Archives Catalog

    Data.gov (United States)

    National Archives and Records Administration — Archival Descriptions from the National Archives Catalog data set provides archival descriptions of the permanent holdings of the federal government in the custody...

  2. Semantic foundation for preferential description logics

    CSIR Research Space (South Africa)

    Britz, K

    2011-12-01

    Full Text Available Description logics are a well-established family of knowledge representation formalisms in Artificial Intelligence. Enriching description logics with non-monotonic reasoning capabilities, especially preferential reasoning as developed by Lehmann...

  3. Transport properties site descriptive model. Guidelines for evaluation and modelling

    International Nuclear Information System (INIS)

    Berglund, Sten; Selroos, Jan-Olof

    2004-04-01

    This report describes a strategy for the development of Transport Properties Site Descriptive Models within the SKB Site Investigation programme. Similar reports have been produced for the other disciplines in the site descriptive modelling (Geology, Hydrogeology, Hydrogeochemistry, Rock mechanics, Thermal properties, and Surface ecosystems). These reports are intended to guide the site descriptive modelling, but also to provide the authorities with an overview of modelling work that will be performed. The site descriptive modelling of transport properties is presented in this report and in the associated 'Strategy for the use of laboratory methods in the site investigations programme for the transport properties of the rock', which describes laboratory measurements and data evaluations. Specifically, the objectives of the present report are to: Present a description that gives an overview of the strategy for developing Site Descriptive Models, and which sets the transport modelling into this general context. Provide a structure for developing Transport Properties Site Descriptive Models that facilitates efficient modelling and comparisons between different sites. Provide guidelines on specific modelling issues where methodological consistency is judged to be of special importance, or where there is no general consensus on the modelling approach. The objectives of the site descriptive modelling process and the resulting Transport Properties Site Descriptive Models are to: Provide transport parameters for Safety Assessment. Describe the geoscientific basis for the transport model, including the qualitative and quantitative data that are of importance for the assessment of uncertainties and confidence in the transport description, and for the understanding of the processes at the sites. Provide transport parameters for use within other discipline-specific programmes. Contribute to the integrated evaluation of the investigated sites. The site descriptive modelling of

  4. Computerized Italian criticality guide, description and validation

    International Nuclear Information System (INIS)

    Carotenuto, M.; Landeyro, P.A.

    1988-10-01

    Our group is developing an 'expert system' for collecting engineering know-how on back-end nuclear plant design. An expert system is the most suitable software tool for our problem. During the analysis, the design process was divided into different branches. At each branch of the design process the Expert System relates a computerized design procedure. Any design procedure is composed of a set of design methods, together with their condition of application and reliability limits. In the framework of this expert system, the nuclear criticality safety analysis procedure was developed, in the form of a computerized criticality guide, attempting to reproduce the designer's normal 'reasoning' process. The criticality guide is composed of two parts: A computerized text, including theory, a description of the accidents occurred in the past and a description of the italian design experience; An interactive computer aided calculation module, containing a graphical facility for critical parameter curves. In the present report are presented the criticality guide (computerized Italian Criticality Guide) and its validation test. (author)

  5. Computerized Italian criticality guide, description and validation

    Energy Technology Data Exchange (ETDEWEB)

    Carotenuto, M; Landeyro, P A [ENEA - Dipartimento Ciclo del Combustibile, Centro Ricerche Energia, Casaccia (Italy)

    1988-10-15

    Our group is developing an 'expert system' for collecting engineering know-how on back-end nuclear plant design. An expert system is the most suitable software tool for our problem. During the analysis, the design process was divided into different branches. At each branch of the design process the Expert System relates a computerized design procedure. Any design procedure is composed of a set of design methods, together with their condition of application and reliability limits. In the framework of this expert system, the nuclear criticality safety analysis procedure was developed, in the form of a computerized criticality guide, attempting to reproduce the designer's normal 'reasoning' process. The criticality guide is composed of two parts: A computerized text, including theory, a description of the accidents occurred in the past and a description of the italian design experience; An interactive computer aided calculation module, containing a graphical facility for critical parameter curves. In the present report are presented the criticality guide (computerized Italian Criticality Guide) and its validation test. (author)

  6. Token Economy: A Systematic Review of Procedural Descriptions.

    Science.gov (United States)

    Ivy, Jonathan W; Meindl, James N; Overley, Eric; Robson, Kristen M

    2017-09-01

    The token economy is a well-established and widely used behavioral intervention. A token economy is comprised of six procedural components: the target response(s), a token that functions as a conditioned reinforcer, backup reinforcers, and three interconnected schedules of reinforcement. Despite decades of applied research, the extent to which the procedures of a token economy are described in complete and replicable detail has not been evaluated. Given the inherent complexity of a token economy, an analysis of the procedural descriptions may benefit future token economy research and practice. Articles published between 2000 and 2015 that included implementation of a token economy within an applied setting were identified and reviewed with a focus on evaluating the thoroughness of procedural descriptions. The results show that token economy components are regularly omitted or described in vague terms. Of the articles included in this analysis, only 19% (18 of 96 articles reviewed) included replicable and complete descriptions of all primary components. Missing or vague component descriptions could negatively affect future research or applied practice. Recommendations are provided to improve component descriptions.

  7. Integrated Project Management System description

    International Nuclear Information System (INIS)

    1987-03-01

    The Uranium Mill Tailings Remedial Action (UMTRA) Project is a Department of Energy (DOE) designated Major System Acquisition (MSA). To execute and manage the Project mission successfully and to comply with the MSA requirements, the UMTRA Project Office (''Project Office'') has implemented and operates an Integrated Project Management System (IPMS). The Project Office is assisted by the Technical Assistance Contractor's (TAC) Project Integration and Control (PIC) Group in system operation. Each participant, in turn, provides critical input to system operation and reporting requirements. The IPMS provides a uniform structured approach for integrating the work of Project participants. It serves as a tool for planning and control, workload management, performance measurement, and specialized reporting within a standardized format. This system description presents the guidance for its operation. Appendices 1 and 2 contain definitions of commonly used terms and abbreviations and acronyms, respectively. 17 figs., 5 tabs

  8. High Luminosity LHC Project Description

    CERN Document Server

    Apollinari, Giorgio; Rossi, Lucio

    2014-01-01

    The High Luminosity LHC (HL-LHC) is a novel configuration of the Large Hadron Collider, aiming at increasing the luminosity by a factor five or more above the nominal LHC design, to allow increasing the integrated luminosity, in the high luminosity experiments ATLAS and CMS, from the 300 fb-1 of the LHC original design up to 3000 fb-1 or more. This paper contains a short description of the main machine parameters and of the main equipment that need to be developed and installed. The preliminary cost evaluation and the time plan are presented, too. Finally, the international collaboration that is supporting the project, the governance and the project structure are discussed, too.

  9. Forsmark - site descriptive model version 0

    International Nuclear Information System (INIS)

    2002-10-01

    area identified in the feasibility study as favourable for further study. This rectangular area has now been designated the Forsmark regional model area. An important component of the present work is a data inventory, in which the location and scope of all potential sources of data is detailed and evaluated with respect to prospective usefulness for future site descriptive modelling for deep disposal. Data sources relevant to the Forsmark regional model area which still, to some degree, need to be evaluated/converted/inserted include the siting and construction of the three nuclear reactors (Forsmark 1-3), the feasibility study for an underground spent nuclear fuel interim storage facility at Forsmark, the pre-investigations and construction of the SFR, and the SAFE project. The present report describes the current level of knowledge of the surface ecosystems in the Forsmark regional model area, in a highly condensed form. It refers to, and draws its examples from, a series of SKB background reports which have been produced since the completion of the Oesthammar feasibility study, and a number of other sources of information which are gathered here for the first time. The data sources are outlined with reference to a series of functional ecosystem types: drainage areas, forest, wetland, agricultural land, lakes and rivers, and sea, each further subdivided into appropriate entities. A systematic approach has been used, even though, at the current level of knowledge, the information in many subdivisions is inadequate or lacking. The aims of biosphere studies within the site investigation programme are to define baseline (preconstruction) conditions, to provide the necessary data base for the environmental impact statement, and to contribute to the dose estimations in the safety analysis. The main emphasis of the report is on the preparation of a site descriptive model, version 0, for the geosphere, since data acquisition and processing in this area, in contrast to the

  10. Demonstration Advanced Avionics System (DAAS) function description

    Science.gov (United States)

    Bailey, A. J.; Bailey, D. G.; Gaabo, R. J.; Lahn, T. G.; Larson, J. C.; Peterson, E. M.; Schuck, J. W.; Rodgers, D. L.; Wroblewski, K. A.

    1982-01-01

    The Demonstration Advanced Avionics System, DAAS, is an integrated avionics system utilizing microprocessor technologies, data busing, and shared displays for demonstrating the potential of these technologies in improving the safety and utility of general aviation operations in the late 1980's and beyond. Major hardware elements of the DAAS include a functionally distributed microcomputer complex, an integrated data control center, an electronic horizontal situation indicator, and a radio adaptor unit. All processing and display resources are interconnected by an IEEE-488 bus in order to enhance the overall system effectiveness, reliability, modularity and maintainability. A detail description of the DAAS architecture, the DAAS hardware, and the DAAS functions is presented. The system is designed for installation and flight test in a NASA Cessna 402-B aircraft.

  11. Hartree-Fock description of superdeformed states

    International Nuclear Information System (INIS)

    Dobaczewski, J.; Meyer, J.

    1991-10-01

    The discovery of superdeformation has been preceded by theoretical predictions made in Nilsson-Strutinsky calculations and a description of the phenomenon still constitutes an exciting challenge to the theory of nuclear collective motion. In particular, a determination of electromagnetic transition rates requires a knowledge of microscopic collective wave functions, which can be achieved by using the Hartree-Fock (HF) theory and the generator coordinate method (GCM). In this study we present results of our calculations concerning the properties and superdeformed states in the mercury region. Using the GCM, we diagonalize the microscopic two-body hamiltonian within the basis set of constrained HF+BCS wave functions. The GCM provides values for the energy of the ground and excited states including the shape isomer which take into account the effect of correlations in the collective degree of freedom. The GCM will also allow us to discuss the qualitative modifications of the shape isomeric stability as induced by changes in pairing correlations

  12. Quadrant I description of current conditions

    International Nuclear Information System (INIS)

    1990-09-01

    In accordance with the requirements of the Consent Decree issued by the Ohio Attorney General's office on August 29, 1989 and with the RCRA Section 3008(h) Consent Order issued by the US Environmental Protection Agency, Region V (USEPA) on September 29, 1989, this report, which provides a Description of Current Conditions within Quadrant I of the Portsmouth Gaseous Diffusion Plant (PORTS) located in Piketon, Ohio, has been developed and submitted for approval. The objectives of this report are to provide data concerning: (1) the current state of knowledge of the environmental setting of Quadrant I of PORTS including ground water, surface water, soil and air; and (2) the extent of known, potential and suspected contamination of these segments of the environment in Quadrant I of the facility. This report is the initial step in the comprehensive RCRA Facility Investigation (RFI) currently underway at PORTS, and will provide a foundation for all subsequent activities related to the RFI in Quadrant I

  13. A nonquasiclassical description of inhomogeneous superconductors

    International Nuclear Information System (INIS)

    Zaikin, A.D.; Panyukov, S.V.

    1988-01-01

    Exact microscopic equations are derived that make it possible to describe inhomogeneous superconductors when the quasi-classical approach is not suitable. These equations are simpler than the Gorkov equations. The authors generalize the derived equations for describing the nonequilibrium states of inhomogeneous superconductors. It is demonstrated that the derived equations (including the case of a nonequilibrium quasi particle distribution function) may be written in the form of linear differential equations for the simultaneous wave function μ, ν. The quasi-classical limit of such equations is examined. Effective boundary conditions are derived for the μ, ν functions that allow description of superconductors with a sharp change in parameters within the scope of the quasi-classical approach

  14. THE SPANISH SCIENTIFIC JOURNALS: A DESCRIPTIVE APPROACH

    Directory of Open Access Journals (Sweden)

    Melba G. Claudio-González

    2017-02-01

    Full Text Available The main objective of this article is to present a broad description of Spanish scientific journals. The results were obtained from a survey distributed to 1,280 editors of Spanish scientific journals included in Dulcinea database (2012 edition. The response rate was 43,8%. As specific objectives, the study aimed to characterize scientific journals and to analyze the particularities of a set of parameters that make up the economic, strategic and operational dimensions of the journals in the period studied. The results show that the funding model of the Spanish scientific journals depends mainly on institutional support, that many journals lack a stable organizational structure and rely heavily on volunteer work, and that the debate on the limitations and difficulties affecting the development of open access remains open.

  15. IASI instrument: technical description and measured performances

    Science.gov (United States)

    Hébert, Ph.; Blumstein, D.; Buil, C.; Carlier, T.; Chalon, G.; Astruc, P.; Clauss, A.; Siméoni, D.; Tournier, B.

    2017-11-01

    IASI is an infrared atmospheric sounder. It will provide meteorologist and scientific community with atmospheric spectra. The IASI system includes 3 instruments that will be mounted on the Metop satellite series, a data processing software integrated in the EPS (EUMETSAT Polar System) ground segment and a technical expertise centre implemented in CNES Toulouse. The instrument is composed of a Fourier transform spectrometer and an associated infrared imager. The optical configuration is based on a Michelson interferometer and the interferograms are processed by an on-board digital processing subsystem, which performs the inverse Fourier transforms and the radiometric calibration. The infrared imager co-registers the IASI soundings with AVHRR imager (AVHRR is another instrument on the Metop satellite). The presentation will focus on the architectures of the instrument, the description of the implemented technologies and the measured performance of the first flight model. CNES is leading the IASI program in association with EUMETSAT. The instrument Prime is ALCATEL SPACE.

  16. CANGEO program description and user's instruction

    International Nuclear Information System (INIS)

    Park, Joo Hwan; Jun, J. S.; Suk, H. C.; Hwang, D. H.; Yoo, Y. J.

    1997-10-01

    This is a report for the description and user's instruction of CANGEO (CANdu GEOmetry) program. CANGEO program is able to generate the geometry input for thermalhydraulic subchannel analysis of CANDU fuel channel. It is developed for the calculation of subchannel analysis of CANDU fuel channel. It is developed for the calculation of subchannel data for a complicated geometry such as a CANDU fuel channel. And this code can be applicable to a bundle eccentricity from pressure tube center to bundle center, pressure tube creep, rod ballooning, and any symmetric subchannel geometry required by thermalhydraulic subchannel analysis code. The report also describes the basic calculation method of subchannel geometry, including user's manual, input and output for a CANDU fuel channel loaded with 37-element fuel bundle. (author). 35 refs., 6 figs

  17. Waste receiving and processing plant control system; system design description

    International Nuclear Information System (INIS)

    LANE, M.P.

    1999-01-01

    The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1

  18. Waste receiving and processing plant control system; system design description

    Energy Technology Data Exchange (ETDEWEB)

    LANE, M.P.

    1999-02-24

    The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

  19. Simpevarp - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    SICADA and SKB GIS, and an inventory and assessment of relevant data in other databases; a systematic overview of data needs and availability for developing a site descriptive model for the surface ecosystems (biosphere) in the Simpevarp regional model area; a more detailed treatment of the present data base for the geosphere in the Simpevarp regional model area, and its transformation into the format of a site descriptive model. V. 0 modelling is based on data available before the start of site investigations, mostly collected for reasons not directly related to the deep disposal of spent nuclear fuel. An important component of the present work, therefore, is a data inventory, in which the location and scope of all potential sources of data is detailed and evaluated with respect to prospective usefulness for future site descriptive modelling for deep disposal. This includes a general description of existing geographical data, of which most are stored in SKB GIS, a survey of data already stored in the SICADA database, and an inventory of other data sources, whose information content has not yet been evaluated and/or inserted in SICADA or SKB GIS. Data sources relevant to the Simpevarp regional model area which still, to some degree, need to be evaluated/converted/inserted include the siting and construction of spent fuel interim storage facility, CLAB, and the siting, pre-investigation, predictive modelling and construction of the Aespoe Hard Rock Laboratory. The present report describes the current level of knowledge of the surface ecosystems in the Simpevarp regional model area, in a highly condensed form. It refers to, and draws its examples from, a series of SKB background reports which have been produced since the completion of the Oskarshamn feasibility study, and a number of other sources of information which are gathered here for the first time. The data sources are outlined with reference to a series of functional ecosystem types: drainage areas, forest, wetland

  20. Simpevarp - site descriptive model version 0

    International Nuclear Information System (INIS)

    2002-11-01

    SICADA and SKB GIS, and an inventory and assessment of relevant data in other databases; a systematic overview of data needs and availability for developing a site descriptive model for the surface ecosystems (biosphere) in the Simpevarp regional model area; a more detailed treatment of the present data base for the geosphere in the Simpevarp regional model area, and its transformation into the format of a site descriptive model. V. 0 modelling is based on data available before the start of site investigations, mostly collected for reasons not directly related to the deep disposal of spent nuclear fuel. An important component of the present work, therefore, is a data inventory, in which the location and scope of all potential sources of data is detailed and evaluated with respect to prospective usefulness for future site descriptive modelling for deep disposal. This includes a general description of existing geographical data, of which most are stored in SKB GIS, a survey of data already stored in the SICADA database, and an inventory of other data sources, whose information content has not yet been evaluated and/or inserted in SICADA or SKB GIS. Data sources relevant to the Simpevarp regional model area which still, to some degree, need to be evaluated/converted/inserted include the siting and construction of spent fuel interim storage facility, CLAB, and the siting, pre-investigation, predictive modelling and construction of the Aespoe Hard Rock Laboratory. The present report describes the current level of knowledge of the surface ecosystems in the Simpevarp regional model area, in a highly condensed form. It refers to, and draws its examples from, a series of SKB background reports which have been produced since the completion of the Oskarshamn feasibility study, and a number of other sources of information which are gathered here for the first time. The data sources are outlined with reference to a series of functional ecosystem types: drainage areas, forest, wetland

  1. Concept for a Satellite-Based Advanced Air Traffic Management System : Volume 4. Operational Description and Qualitative Assessment.

    Science.gov (United States)

    1974-02-01

    The volume presents a description of how the Satellite-Based Advanced Air Traffic Management System (SAATMS) operates and a qualitative assessment of the system. The operational description includes the services, functions, and tasks performed by the...

  2. Description of broadband structure-borne and airborne noise transmission from the powertrain (engine-gear combination including engine intake and exhaust system) in modern combustion process as well as new systems for variable control of gas exchange. Binaural transfer path analysis and synthesis. Interim report; Beschreibung der breitbandigen Koerper- und Luftschallausbreitung aus dem Powertrain (Motor-Getriebe-Verband inklusive Ansaug- und Abgasanlage) bei modernen Verbrennungsverfahren sowie neuer Systeme zur variablen Ladungswechselsteuerung. Binaurale Transferpfadanalyse und -synthese. Zwischenbericht

    Energy Technology Data Exchange (ETDEWEB)

    Sottek, R. [HEAD acoustics GmbH, Herzogenrath (Germany); Behler, G.; Kellert, T. [RWTH Aachen (DE). Inst. fuer Technische Akustik (ITA); Bernhard, U.

    2004-07-01

    The modern combustion procedures and new valve train generations lead to a different temporal and spectral behaviour of the vibrations between the interfaces of a powertrain and the adjoining structures and at the same time to a different airborne sound radiation via the engine compartment and the orifices and component surfaces at the intake and exhaust system into the passenger compartment. The influence of the high-frequency components on the vehicle interior noise becomes more and more important. Coupling and mass effects have to be taken into consideration now, because otherwise results might increasingly be misinterpreted. Previous methods including the binaural transfer path analysis and synthesis do not take account of these effects. This research project shall fill this gap. Regarding the airborne sound component the engine compartment can at best be considered as a pressure chamber for low frequencies only. However, for higher frequencies the positions of the partial sound sources, the corresponding transfer functions, near-field effects and modal structures in the engine compartment become increasingly relevant. In this project these influencing parameters shall be classified with regard to quality and quantity. This knowledge is also of fundamental interest for the determination of the primary sound sources on the test bench and the transferability of the results to the vehicle. The most important aim of this project is to develop simplified models for the structure-borne and airborne noise transmission from a precise and complex database and to reduce them to the essential by means of parameter studies. In the final stage of the project, the complicated fine structures of the transfer functions will be reduced to a few model functions, similar to the procedure of the modal analysis. From this simple model a ''black box'' will be derived which is the basis for simulating driving conditions, applying modifications and judging them

  3. Description of the Triton reactor

    International Nuclear Information System (INIS)

    1967-09-01

    The Triton reactor is an enriched uranium pool type reactor. It began operation in 1959, after a divergence made on the June 30 the same year. Devoted to studies of radiation protection, its core can be displaced in the longitudinal direction. The pool can be separated in two unequal compartments by a wall. The Triton core is placed in a small compartment, the Nereide core in the big compartment. A third compartment without water is called Naiade II, is separated by a concrete wall in which is made a window closed by an aluminium plate (2.50 m x 2.70 m). The Naiade II hole is useful for protection experiments using the Nereide core. After a complete refitting, the power of the triton reactor that reached progressively from 1.2 MW to 2 MW, then 3 MW has reached in August 1965 6.5 MW. The reactor has been specialized in irradiations in fix position, the core become fix, the nereide core has been hung mobile. Since it has been used for structure materials irradiation, for radioelements fabrication and fundamental research. The following descriptions are valid for the period after August 1965 [fr

  4. XML Translator for Interface Descriptions

    Science.gov (United States)

    Boroson, Elizabeth R.

    2009-01-01

    A computer program defines an XML schema for specifying the interface to a generic FPGA from the perspective of software that will interact with the device. This XML interface description is then translated into header files for C, Verilog, and VHDL. User interface definition input is checked via both the provided XML schema and the translator module to ensure consistency and accuracy. Currently, programming used on both sides of an interface is inconsistent. This makes it hard to find and fix errors. By using a common schema, both sides are forced to use the same structure by using the same framework and toolset. This makes for easy identification of problems, which leads to the ability to formulate a solution. The toolset contains constants that allow a programmer to use each register, and to access each field in the register. Once programming is complete, the translator is run as part of the make process, which ensures that whenever an interface is changed, all of the code that uses the header files describing it is recompiled.

  5. Probabilistic description of traffic flow

    International Nuclear Information System (INIS)

    Mahnke, R.; Kaupuzs, J.; Lubashevsky, I.

    2005-01-01

    A stochastic description of traffic flow, called probabilistic traffic flow theory, is developed. The general master equation is applied to relatively simple models to describe the formation and dissolution of traffic congestions. Our approach is mainly based on spatially homogeneous systems like periodically closed circular rings without on- and off-ramps. We consider a stochastic one-step process of growth or shrinkage of a car cluster (jam). As generalization we discuss the coexistence of several car clusters of different sizes. The basic problem is to find a physically motivated ansatz for the transition rates of the attachment and detachment of individual cars to a car cluster consistent with the empirical observations in real traffic. The emphasis is put on the analogy with first-order phase transitions and nucleation phenomena in physical systems like supersaturated vapour. The results are summarized in the flux-density relation, the so-called fundamental diagram of traffic flow, and compared with empirical data. Different regimes of traffic flow are discussed: free flow, congested mode as stop-and-go regime, and heavy viscous traffic. The traffic breakdown is studied based on the master equation as well as the Fokker-Planck approximation to calculate mean first passage times or escape rates. Generalizations are developed to allow for on-ramp effects. The calculated flux-density relation and characteristic breakdown times coincide with empirical data measured on highways. Finally, a brief summary of the stochastic cellular automata approach is given

  6. Forsmark - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    area identified in the feasibility study as favourable for further study. This rectangular area has now been designated the Forsmark regional model area. An important component of the present work is a data inventory, in which the location and scope of all potential sources of data is detailed and evaluated with respect to prospective usefulness for future site descriptive modelling for deep disposal. Data sources relevant to the Forsmark regional model area which still, to some degree, need to be evaluated/converted/inserted include the siting and construction of the three nuclear reactors (Forsmark 1-3), the feasibility study for an underground spent nuclear fuel interim storage facility at Forsmark, the pre-investigations and construction of the SFR, and the SAFE project. The present report describes the current level of knowledge of the surface ecosystems in the Forsmark regional model area, in a highly condensed form. It refers to, and draws its examples from, a series of SKB background reports which have been produced since the completion of the Oesthammar feasibility study, and a number of other sources of information which are gathered here for the first time. The data sources are outlined with reference to a series of functional ecosystem types: drainage areas, forest, wetland, agricultural land, lakes and rivers, and sea, each further subdivided into appropriate entities. A systematic approach has been used, even though, at the current level of knowledge, the information in many subdivisions is inadequate or lacking. The aims of biosphere studies within the site investigation programme are to define baseline (preconstruction) conditions, to provide the necessary data base for the environmental impact statement, and to contribute to the dose estimations in the safety analysis. The main emphasis of the report is on the preparation of a site descriptive model, version 0, for the geosphere, since data acquisition and processing in this area, in contrast to the

  7. Strengthening the Role of Part-Time Faculty in Community Colleges. Example Job Description for Part-Time Faculty: Valencia College--Job Description and Essential Competencies

    Science.gov (United States)

    Center for Community College Student Engagement, 2013

    2013-01-01

    In an effort to support college conversations regarding strengthening the role of part-time faculty, this brief document presents the job description for a Valencia College part-time/adjunct professor (revised as of July 19, 2013). The description includes essential functions, qualifications, and knowledge, skills, and abilities. This is followed…

  8. Peanut (Arachis hypogaea L.): Origin and botanical descriptions

    Science.gov (United States)

    Since the first description of the cultivated peanut, Arachis hypogaea L. by Linneaus in 1753, to the recent monograph on the taxonomy of genus Arachis (Krapovickas and Gregory 1994 and 2007), our knowledge of the genetic structure of the genus including its origin, variability, and geographical dis...

  9. Quantitative description of woody plant communities: Part II ...

    African Journals Online (AJOL)

    These procedures are divided into primary and secondary calculations. The former is then divided into the calculation of spatial tree volume and preliminary calculations regarding the complete quantitative description. The latter include the calculation of the evapotranspiration tree equivalent (ETTE), browse tree equivalent ...

  10. Context-descriptive Prototypes and Their Application to Medicine Administration

    DEFF Research Database (Denmark)

    Bossen, Claus; Jørgensen, Jens Bæk

    2004-01-01

    processes, and context of use; (2) it is a formal description. Because of (1), designers, including users, are provided with a means to investigate the system in the context of the envisioned work processes. Because of (2), investigations into questions of formalisation and automation, not only...

  11. Tank waste remediation system technical baseline summary description

    International Nuclear Information System (INIS)

    Raymond, R.E.

    1998-01-01

    This document is one of the tools used to develop and control the mission work as depicted in the included figure. This Technical Baseline Summary Description document is the top-level tool for management of the Technical Baseline for waste storage operations

  12. On the perceived usefulness of risk descriptions for decision-making in disaster risk management

    International Nuclear Information System (INIS)

    Lin, Lexin; Nilsson, Anders; Sjölin, Johan; Abrahamsson, Marcus; Tehler, Henrik

    2015-01-01

    Managing risk using an “all-hazards” and “whole of society”-approach involves extensive communication of risk descriptions among many stakeholders. In the present study we investigate how professionals working with disaster risk management in such contexts perceive the usefulness of different descriptions of risk. Empirical data from the Swedish disaster risk management system were used in an attempt to investigate the aspects of a risk description that affect its usefulness (as perceived by professionals). Thirty-three local municipal risk and vulnerability assessments (RVA documents) produced in the region of Scania in 2012 were analyzed in terms of six variables. The documents were then ranked by professionals based on their perceived usefulness for decision-making. Statistical analysis was conducted to identify any possible correlations between the overall ranking of the usefulness of the municipal RVA:s and each of the variables. We conclude that the way the likelihood and consequences of scenarios are described influence the perceived usefulness of a risk description. Furthermore, whether descriptions of scenarios are included in a risk description or not, and whether background information concerning the likelihood of scenarios are included also influence perceived usefulness of risk descriptions. - Highlights: • Written communication of risk between professionals is investigated. • The way likelihood is described influences a risk description's usefulness. • The way consequences are described influence a risk description's usefulness. • Whether background information is included in a risk description influences its usefulness

  13. Conceptual modular description of the high-level waste management system for system studies model development

    International Nuclear Information System (INIS)

    McKee, R.W.; Young, J.R.; Konzek, G.J.

    1992-08-01

    This document presents modular descriptions of possible alternative components of the federal high-level radioactive waste management system and the procedures for combining these modules to obtain descriptions for alternative configurations of that system. The 20 separate system component modules presented here can be combined to obtain a description of any of the 17 alternative system configurations (i.e., scenarios) that were evaluated in the MRS Systems Studies program (DOE 1989a). First-approximation descriptions of other yet-undefined system configurations could also be developed for system study purposes from this database. The descriptions include, in a modular format, both functional descriptions of the processes in the waste management system, plus physical descriptions of the equipment and facilities necessary for performance of those functions

  14. An IBM description of coexistence in the platinum isotopes

    International Nuclear Information System (INIS)

    Harder, M.; Tang, K.T.; Van Isacker, P.

    1996-06-01

    The low-energy spectra of the platinum isotopes show evidence for the presence of two types of configurations: one which involves only excitations of the valence nucleons and another which includes proton excitations across the Z = 82 shell gap. A schematic description is presented of the coexistence and mixing of both configurations in the context of the interacting boson model and energies, electromagnetic transition rates and moments, and radii are studied. The analysis shows that a simultaneous description of both configurations puts constraints on the possible range of model parameters. Isotope and isomer shifts are shown to be sensitive to the mixing of both configurations. (author)

  15. Relativistic continuum physics for the description of heavy ion collisions

    International Nuclear Information System (INIS)

    Lukacs, Bela

    1986-01-01

    The application of relativistic continuum physics to the description of the nuclear fireball evolution from the start of expansion to the breaking is discussed. The basic formalism and basic assumptions of relativistic hydrodynamics and thermodynamics are analyzed in detail. The four basic assumptions are not valid in the case of nuclear fireball produced in heavy ion collisions, but thermodynamics can be extended in different ways to incorporate anisotropy, fluctuations, gradients and the lack of the local equilibrium. The extended continuum formalism is applicable to the description of the nuclear fireball dynamics, including the nuclear - quark matter phase transition. (D.Gy.)

  16. Descriptive Topology in Selected Topics of Functional Analysis

    CERN Document Server

    Kakol, J; Pellicer, Manuel Lopez

    2011-01-01

    "Descriptive Topology in Selected Topics of Functional Analysis" is a collection of recent developments in the field of descriptive topology, specifically focused on the classes of infinite-dimensional topological vector spaces that appear in functional analysis. Such spaces include Frechet spaces, (LF)-spaces and their duals, and the space of continuous real-valued functions C(X) on a completely regular Hausdorff space X, to name a few. These vector spaces appear in functional analysis in distribution theory, differential equations, complex analysis, and various other analytical set

  17. A coherent description of the process of design

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl

    1992-01-01

    , and others. Doing so, a corresponding number of philosophical problems are solved, and the description becomes a coherent theory. The author has shown that it is possible to make a computer program for conceptual modelling based on the theory presented, and the principles of a CAD system including......A description of the creative design process is given based on Empiricism and using the theory of sets on conceptual and subconscious representations of the human mind. Definitions that are more precise are given of a number of common concepts such as association, synthesis, culture, creation, art...... the program and supporting the creative process of the designer is described....

  18. Development of IAEA description of passive safety and subsequent thoughts

    Energy Technology Data Exchange (ETDEWEB)

    Lang, P M [USDOE, Washington, DC (United States)

    1996-12-01

    The description of passive components and systems published by the IAEA in its TECDOC-626 was developed in the course of a Technical Committee Meeting held in Sweden and two subsequent Consultants Meetings held in Vienna. This description is reviewed and discussed in terms of the philosophies behind it, alternatives considered, problems encountered, and conclusions drawn. Also discussed is an Appendix to the TECDOC, which illustrates the spectrum of possibilities from passive to active by describing four typical categories of passivity. Subsequent thoughts on passive safety include a discussion of its advantages and disadvantages, concluding with a summary of current views and problems with it. (author). 8 refs.

  19. Advanced Transport Operating System (ATOPS) control display unit software description

    Science.gov (United States)

    Slominski, Christopher J.; Parks, Mark A.; Debure, Kelly R.; Heaphy, William J.

    1992-01-01

    The software created for the Control Display Units (CDUs), used for the Advanced Transport Operating Systems (ATOPS) project, on the Transport Systems Research Vehicle (TSRV) is described. Module descriptions are presented in a standardized format which contains module purpose, calling sequence, a detailed description, and global references. The global reference section includes subroutines, functions, and common variables referenced by a particular module. The CDUs, one for the pilot and one for the copilot, are used for flight management purposes. Operations performed with the CDU affects the aircraft's guidance, navigation, and display software.

  20. Field description of coarse bioclastic fabrics

    Energy Technology Data Exchange (ETDEWEB)

    Kidwell, S.M.; Holland, S.M. (Univ. of Chicago, IL (United States))

    1991-08-01

    Shell- and bone-bearing rocks can be readily categorized into 9 macroscopic fabric types using semi-quantitative scales for close-packing and size-sorting of bioclasts greater than 2 mm in diameter. Although designed to describe fossiliferous siliciclastics and volcaniclastics, this system of field description can also be used to enlarge upon standard petrographic descriptions of fossiliferous carbonates. In cross-sectional bed views, coarse bioclasts may be densely packed. These coarse bioclasts (>2 mm) may be well sorted (central 80% of bioclasts lie within 1 or 2 adjacent phi size-classes), bimodal (well sorted but with a distinct second mode), or poorly sorted (central 80% of bioclasts distributed over 3 or more adjacent size-classes). Despite the complicating effects of bioclast shape, novices show 90% accuracy in estimating close-packing from photographs. They have only 60% accuracy in estimating size-sorting (the most common error is underestimating goodness of sorting), underscoring the importance of size-tallies to cross-check visual estimates when first using this scheme. This packing/sorting approach provides a good visual image of the fabric, and narrows the range of possible modes of origin more than alternative criteria such as volumetric percent-abundance (which shows no one-to-one equivalence with close-packing), orientation, and fragmentation. However, detailed interpretations of fabrics usually require more information on these and other features of the deposit, including bioclast condition, associated sedimentary structures, life-habits of bioclast-producers, and stratigraphic context.

  1. Brief description of the Wackersdorf Reprocessing Facility

    International Nuclear Information System (INIS)

    1986-01-01

    The DWK is now planning the construction and operation of a facility for the reprocessing of spent fuel elements and the fabrication of mixed-oxide fuel elements which will initially have an average daily throughput of 2 tons (t) of nuclear fuel. The application required by the Atomic Law was submitted to the Bavarian State Ministry for State Development and Environmental Matters on October 28, 1982. According to Par. 3, Section 1, No. 1 of the Atomic Law Procedural Ordinance such an application for permission in accordance with par. 7 AtL must explicitly be accompanied by a safety report which shall make it possible for third parties to make a judgment whether the impacts associated with the facility and its operation could damage their rights. The safety report is intended to present and explain the concept of the facility, the safety-technological design bases, and the operation of the plant, including its operation and safety systems and the impacts and proposed preventive measures. In addition to the detailed presentations in the safety report, Par. 3 of the Atomic Law Procedural Ordinance also requires a brief description of the plant designed for general public understanding, suitable for the design, which will also explain the expected impacts on the general environment and the surrounding area. Hence the brief description presents and explains the following matters: the site; the technology and state of the art for reprocessing of spent nuclear fuel; the structure and function of the proposed facility; safety provisions of the proposed facility and the management of perturbations in operation; the impacts of the facility and its operation on the environment; measures to be taken for dealing with the radioactive wastes; and provisions for ultimate shut-down of the facility

  2. Description of premixing with the MC3D code including molten jet behavior modeling. Comparison with FARO experimental results

    Energy Technology Data Exchange (ETDEWEB)

    Berthoud, G.; Crecy, F. de; Meignen, R.; Valette, M. [CEA-G, DRN/DTP/SMTH, 17 rue des Martyrs, 38054 Grenoble Cedex 9 (France)

    1998-01-01

    The premixing phase of a molten fuel-coolant interaction is studied by the way of mechanistic multidimensional calculation. Beside water and steam, corium droplet flow and continuous corium jet flow are calculated independent. The 4-field MC3D code and a detailed hot jet fragmentation model are presented. MC3D calculations are compared to the FARO L14 experiment results and are found to give satisfactory results; heat transfer and jet fragmentation models are still to be improved to predict better final debris size values. (author)

  3. THE TEMPIO DELLA CONSOLAZIONE IN TODI: INTEGRATED GEOMATIC TECHNIQUES FOR A MONUMENT DESCRIPTION INCLUDING STRUCTURAL DAMAGE EVOLUTION IN TIME

    Directory of Open Access Journals (Sweden)

    F. Radicioni

    2017-05-01

    Full Text Available The Tempio della Consolazione in Todi (16th cent. has always been one of the most significant symbols of the Umbrian landscape. Since the first times after its completion (1606 the structure has exhibited evidences of instability, due to foundation subsiding and/or seismic activity. Structural and geotechnical countermeasures have been undertaken on the Tempio and its surroundings from the 17th century until recent times. Until now a truly satisfactory analysis of the overall deformation and attitude of the building has not been performed, since the existing surveys record the overhangs of the pillars, the crack pattern or the subsidence over limited time spans. Describing the attitude of the whole church is in fact a complex operation due to the architectural character of the building, consisting of four apses (three polygonal and one semicircular covered with half domes, which surround the central area with the large dome. The present research aims to fill the gap of knowledge with a global study based on geomatic techniques for an accurate 3D reconstruction of geometry and attitude, integrated with a historical research on damage and interventions and a geotechnical analysis. The geomatic survey results from the integration of different techniques: GPS-GNSS for global georeferencing, laser scanning and digital photogrammetry for an accurate 3D reconstruction, high precision total station and geometric leveling for a direct survey of deformations and cracks, and for the alignment of the laser scans. The above analysis allowed to assess the dynamics of the cracks occurred in the last 25 years by a comparison with a previous survey. From the photographic colour associated to the point cloud was also possible to map the damp patches showing on the domes intrados, mapping their evolution over the last years.

  4. Applications of EDGAR. Including a description of EDGAR 3.2. Reference database with trend data for 1970-1995

    International Nuclear Information System (INIS)

    Olivier, J.G.J.; Peters, J.A.H.W.; Bakker, J.; Berdowski, J.J.; Visschedijk, A.J.H.; Bloos, J.P.J.

    2002-01-01

    EDGAR 2.0 (Emission Database for Global Atmospheric Research) provided global annual emissions for 1990 of greenhouse gases CO2, CH4 and N2O and precursor gases CO, NOx, NMVOC and SO2 both per region and on a 1 degrees x 1degrees grid. Similar inventories were compiled for a number of CFCs, halons and methyl bromide, methyl chloroform. This report discusses the applications of EDGAR 2.0 over the last couple of years as well as the validation and uncertainty analysis carried out. About 700 users have downloaded EDGAR 2.0 data during the last 24 year. In addition, the approach taken to compile EDGAR 3.0 is discussed: update and extension from 1990 to 1995 for all gases and extended time series for direct greenhouse gases to 1970-1995 and inclusion of the new 'Kyoto' greenhouse gases HFCs, PFCs, SF6. Selected time profiles for the seasonality of anthropogenic sources are also discussed. The work is linked into and part of the Global Emissions Inventory Activity (GEIA) of IGBP/IGAC

  5. Taxonomic and geographic novelties in the genus Plantago (Plantaginaceae) in Chile, including the description of a new species

    DEFF Research Database (Denmark)

    Hassemer, Gustavo; Shipunov, Alexey; Rønsted, Nina

    2018-01-01

    We present taxonomic and geographic novelties in the genus Plantago from Chile. More specifically, we describe P. nebularis, a new species endemic to Cerro Moreno, Antofagasta region, and propose P. zoellneriana, a new name for P. sericea subsp. araucana. We also lectotypify the name P. sericea, ...

  6. Gregarines (Apicomplexa, Gregarinasina) in psocids (Insecta, Psocoptera) including a new species description and their potential use as pest control agents.

    Science.gov (United States)

    Rueckert, Sonja; Devetak, Dušan

    2017-08-01

    Gregarine apicomplexans are unicellular organisms that infect invertebrate hosts in marine, freshwater and terrestrial habitats. The largest group of invertebrates infested on land is the insects. The insect order Psocoptera (booklice) has recently gained wider interest due to specimens occurring in stored food products and therefore being considered pest organisms. Biological control agents are often used to eliminate pest organisms. In this study we examined the psocid Dorypteryx domestica, an invasive psocid species that is spreading all over the world. We were able to isolate and describe a new gregarine species (Enterocystis dorypterygis sp. n.) infecting D. domestica. The trophozoites are panduri- or pyriform and their association/syzygy is caudo-frontal. The surface is inscribed by longitudinal epicytic folds covering the complete cell. Phylogenetic analyses of the SSU rDNA gene revealed an only weakly supported relationship with two Gregarina species G. ormieri and G. basiconstrictonea, both from tenebrionid beetles. Gregarines have been proposed to have some potential as biological control agents for several insects. Identifying the gregarine species infecting pest organisms like psocids is a first step and prerequisite for the probable utilization of these parasites as biological control agents in the future. Copyright © 2017 Elsevier GmbH. All rights reserved.

  7. Three Dinophyceae from Clipperton Island lagoon (eastern Pacific Ocean), including a description of Peridiniopsis cristata var. tubulifera var. nov.

    OpenAIRE

    Coute, Alain; Perrette, Catherine; Chomerat, Nicolas

    2012-01-01

    Clipperton Island is a small French coral atoll in the eastern Pacific Ocean, which has been rarely investigated because of its remote location and difficult access. There is little scientific information on this ecosystem and only a few microalgae have been reported from the lagoon. To date, only one dinoflagellate taxon, Peridiniopsis cristata, is known to inhabit the lagoon. During an expedition in 2005 to study the lagoon and the surrounding oceanic waters of Clipperton Island, a further ...

  8. Primary Numbers Database for ATLAS Detector Description Parameters

    CERN Document Server

    Vaniachine, A; Malon, D; Nevski, P; Wenaus, T

    2003-01-01

    We present the design and the status of the database for detector description parameters in ATLAS experiment. The ATLAS Primary Numbers are the parameters defining the detector geometry and digitization in simulations, as well as certain reconstruction parameters. Since the detailed ATLAS detector description needs more than 10,000 such parameters, a preferred solution is to have a single verified source for all these data. The database stores the data dictionary for each parameter collection object, providing schema evolution support for object-based retrieval of parameters. The same Primary Numbers are served to many different clients accessing the database: the ATLAS software framework Athena, the Geant3 heritage framework Atlsim, the Geant4 developers framework FADS/Goofy, the generator of XML output for detector description, and several end-user clients for interactive data navigation, including web-based browsers and ROOT. The choice of the MySQL database product for the implementation provides addition...

  9. Technical baseline description for in situ vitrification laboratory test equipment

    International Nuclear Information System (INIS)

    Beard, K.V.; Bonnenberg, R.W.; Watson, L.R.

    1991-09-01

    IN situ vitrification (ISV) has been identified as possible waste treatment technology. ISV was developed by Pacific Northwest Laboratory (PNL), Richland, Washington, as a thermal treatment process to treat contaminated soils in place. The process, which electrically melts and dissolves soils and associated inorganic materials, simultaneously destroys and/or removes organic contaminants while incorporating inorganic contaminants into a stable, glass-like residual product. This Technical Baseline Description has been prepared to provide high level descriptions of the design of the Laboratory Test model, including all design modifications and safety improvements made to data. Furthermore, the Technical Baseline Description provides a basic overview of the interface documents for configuration management, program management interfaces, safety, quality, and security requirements. 8 figs

  10. Developing HYDMN code to include the transient of MNSR

    International Nuclear Information System (INIS)

    Al-Barhoum, M.

    2000-11-01

    A description of the programs added to HYDMN code (a code for thermal-hydraulic steady state of MNSR) to include the transient of the same MNSR is presented. The code asks the initial conditions for the power (in k W) and the cold initial core inlet temperature (in degrees centigrade). A time-dependent study of the coolant inlet and outlet temperature, its speed, pool and tank temperatures is done for MNSR in general and for the Syrian MNSR in particular. The study solves the differential equations taken from reference (1) by using some numerical methods found in reference (3). The code becomes this way independent of any external information source. (Author)

  11. Modification of SKYSHINE-III to include cask array shadowing

    Energy Technology Data Exchange (ETDEWEB)

    Hertel, N.E. [Georgia Institute of Technology, Atlanta, GA (United States); Pfeifer, H.J. [NAC International, Norcross, GA (United States); Napolitano, D.G. [NISYS Corporation, Duluth, GA (United States)

    2000-03-01

    The NAC International version of SKYSHINE-III has been expanded to represent the radiation emissions from ISFSI (Interim Spent Fuel Storage Installations) dry storage casks using surface source descriptions. In addition, this modification includes a shadow shielding algorithm of the casks in the array. The resultant code is a flexible design tool which can be used to rapidly assess the impact of various cask loadings and arrangements. An example of its use in calculating dose rates for a 10x8 cask array is presented. (author)

  12. Description of the CAREM Reactor Neutronic Calculation Codes

    International Nuclear Information System (INIS)

    Villarino, Eduardo; Hergenreder, Daniel

    2000-01-01

    In this work is described the neutronic calculation line used to design the CAREM reactor.A description of the codes used and the interfaces between the different programs are presented.Both, the normal calculation line and the alternative or verification calculation line are included.The calculation line used to obtain the kinetics parameters (effective delayed-neutron fraction and prompt-neutron lifetime) is also included

  13. International Nuclear Model. Volume 3. Program description

    International Nuclear Information System (INIS)

    Andress, D.

    1985-01-01

    This is Volume 3 of three volumes of documentation of the International Nuclear Model (INM). This volume presents the Program Description of the International Nuclear Model, which was developed for the Nuclear and Alternate Fuels Division (NAFD), Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), US Department of Energy (DOE). The International Nuclear Model (INM) is a comprehensive model of the commercial nuclear power industry. It simulates economic decisions for reactor deployment and fuel management decision based on an input set of technical economic and scenario parameters. The technical parameters include reactor operating characteristics, fuel cycle timing and mass loss factors, and enrichment tails assays. Economic parameters include fuel cycle costs, financial data, and tax alternatives. INM has a broad range of scenario options covering, for example, process constraints, interregional activities, reprocessing, and fuel management selection. INM reports reactor deployment schedules, electricity generation, and fuel cycle requirements and costs. It also has specialized reports for extended burnup and permanent disposal. Companion volumes to Volume 3 are: Volume 1 - Model Overview, and Volume 2 - Data Base Relationships

  14. Colony collapse disorder: a descriptive study.

    Directory of Open Access Journals (Sweden)

    Dennis Vanengelsdorp

    Full Text Available BACKGROUND: Over the last two winters, there have been large-scale, unexplained losses of managed honey bee (Apis mellifera L. colonies in the United States. In the absence of a known cause, this syndrome was named Colony Collapse Disorder (CCD because the main trait was a rapid loss of adult worker bees. We initiated a descriptive epizootiological study in order to better characterize CCD and compare risk factor exposure between populations afflicted by and not afflicted by CCD. METHODS AND PRINCIPAL FINDINGS: Of 61 quantified variables (including adult bee physiology, pathogen loads, and pesticide levels, no single measure emerged as a most-likely cause of CCD. Bees in CCD colonies had higher pathogen loads and were co-infected with a greater number of pathogens than control populations, suggesting either an increased exposure to pathogens or a reduced resistance of bees toward pathogens. Levels of the synthetic acaricide coumaphos (used by beekeepers to control the parasitic mite Varroa destructor were higher in control colonies than CCD-affected colonies. CONCLUSIONS/SIGNIFICANCE: This is the first comprehensive survey of CCD-affected bee populations that suggests CCD involves an interaction between pathogens and other stress factors. We present evidence that this condition is contagious or the result of exposure to a common risk factor. Potentially important areas for future hypothesis-driven research, including the possible legacy effect of mite parasitism and the role of honey bee resistance to pesticides, are highlighted.

  15. Two-fluid turbulence including electron inertia

    Energy Technology Data Exchange (ETDEWEB)

    Andrés, Nahuel, E-mail: nandres@iafe.uba.ar; Gómez, Daniel [Instituto de Astronomía y Física del Espacio, CC. 67, suc. 28, 1428 Buenos Aires (Argentina); Departamento de Física, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Pabellón I, 1428 Buenos Aires (Argentina); Gonzalez, Carlos; Martin, Luis; Dmitruk, Pablo [Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires and IFIBA, CONICET, 1428 Buenos Aires (Argentina)

    2014-12-15

    We present a full two-fluid magnetohydrodynamic (MHD) description for a completely ionized hydrogen plasma, retaining the effects of the Hall current, electron pressure, and electron inertia. According to this description, each plasma species introduces a new spatial scale: the ion inertial length λ{sub i} and the electron inertial length λ{sub e}, which are not present in the traditional MHD description. In the present paper, we seek for possible changes in the energy power spectrum in fully developed turbulent regimes, using numerical simulations of the two-fluid equations in two-and-a-half dimensions. We have been able to reproduce different scaling laws in different spectral ranges, as it has been observed in the solar wind for the magnetic energy spectrum. At the smallest wavenumbers where plain MHD is valid, we obtain an inertial range following a Kolmogorov k{sup −5∕3} law. For intermediate wavenumbers such that λ{sub i}{sup −1}≪k≪λ{sub e}{sup −1}, the spectrum is modified to a k{sup −7∕3} power-law, as has also been obtained for Hall-MHD neglecting electron inertia terms. When electron inertia is retained, a new spectral region given by k>λ{sub e}{sup −1} arises. The power spectrum for magnetic energy in this region is given by a k{sup −11∕3} power law. Finally, when the terms of electron inertia are retained, we study the self-consistent electric field. Our results are discussed and compared with those obtained in the solar wind observations and previous simulations.

  16. Identification of a developmental gene expression signature, including HOX genes, for the normal human colonic crypt stem cell niche: overexpression of the signature parallels stem cell overpopulation during colon tumorigenesis.

    Science.gov (United States)

    Bhatlekar, Seema; Addya, Sankar; Salunek, Moreh; Orr, Christopher R; Surrey, Saul; McKenzie, Steven; Fields, Jeremy Z; Boman, Bruce M

    2014-01-15

    Our goal was to identify a unique gene expression signature for human colonic stem cells (SCs). Accordingly, we determined the gene expression pattern for a known SC-enriched region--the crypt bottom. Colonic crypts and isolated crypt subsections (top, middle, and bottom) were purified from fresh, normal, human, surgical specimens. We then used an innovative strategy that used two-color microarrays (∼18,500 genes) to compare gene expression in the crypt bottom with expression in the other crypt subsections (middle or top). Array results were validated by PCR and immunostaining. About 25% of genes analyzed were expressed in crypts: 88 preferentially in the bottom, 68 in the middle, and 131 in the top. Among genes upregulated in the bottom, ∼30% were classified as growth and/or developmental genes including several in the PI3 kinase pathway, a six-transmembrane protein STAMP1, and two homeobox (HOXA4, HOXD10) genes. qPCR and immunostaining validated that HOXA4 and HOXD10 are selectively expressed in the normal crypt bottom and are overexpressed in colon carcinomas (CRCs). Immunostaining showed that HOXA4 and HOXD10 are co-expressed with the SC markers CD166 and ALDH1 in cells at the normal crypt bottom, and the number of these co-expressing cells is increased in CRCs. Thus, our findings show that these two HOX genes are selectively expressed in colonic SCs and that HOX overexpression in CRCs parallels the SC overpopulation that occurs during CRC development. Our study suggests that developmental genes play key roles in the maintenance of normal SCs and crypt renewal, and contribute to the SC overpopulation that drives colon tumorigenesis.

  17. Freeform surface descriptions. Part I: Mathematical representations

    Science.gov (United States)

    Broemel, Anika; Lippmann, Uwe; Gross, Herbert

    2017-10-01

    Optical systems can benefit strongly from freeform surfaces; however, the choice of the right surface representation is not trivial and many aspects must be considered. In this work, we discuss the general approach classical globally defined representations, as well as the basic mathematics and properties of the most commonly used descriptions and present a new description developed by us for describing freeform surfaces.

  18. Promoting Shared Decision Making through Descriptive Inquiry

    Science.gov (United States)

    Seher, Rachel; Traugh, Cecelia; Cheng, Alan

    2018-01-01

    This article shows how City-As-School, a progressive public school in New York City, used descriptive inquiry to deepen shared decision making, which is a central value of the school and part of a democratic way of life. Descriptive inquiry is a democratic knowledge-making process that was developed at the Prospect School in North Bennington,…

  19. Formalizing the Problem of Music Description

    DEFF Research Database (Denmark)

    Sturm, Bob L.; Bardeli, Rolf; Langlois, Thibault

    2015-01-01

    The lack of a formalism for “the problem of music descrip- tion” results in, among other things: ambiguity in what problem a music description system must address, how it should be evaluated, what criteria define its success, and the paradox that a music description system can reproduce the “ground...

  20. Description in Literature and Other Media

    Directory of Open Access Journals (Sweden)

    Thomas Van Parys

    2009-10-01

    Full Text Available Book Review:
    Description in Literature and Other Media
    Werner Wolf & Walter Bernhart, eds., Description in Literature and Other Media. Amsterdam/New
    York: Rodopi, 2007.
    ISBN: 978-90-420-2310-9

  1. UO3 plant turnover - facility description document

    International Nuclear Information System (INIS)

    Clapp, D.A.

    1995-01-01

    This document was developed to provide a facility description for those portions of the UO 3 Facility being transferred to Bechtel Hanford Company, Inc. (BHI) following completion of facility deactivation. The facility and deactivated state condition description is intended only to serve as an overview of the plant as it is being transferred to BHI

  2. 4 CFR 202.1 - Description.

    Science.gov (United States)

    2010-01-01

    ... further encircled by a ring bearing the gold-colored words “RECOVERY ACCOUNTABILITY AND TRANSPARENCY... 4 Accounts 1 2010-01-01 2010-01-01 false Description. 202.1 Section 202.1 Accounts RECOVERY ACCOUNTABILITY AND TRANSPARENCY BOARD OFFICIAL SEAL § 202.1 Description. (a) The official seal of the Recovery...

  3. Waste Management System Description Document (WMSD)

    International Nuclear Information System (INIS)

    1992-02-01

    This report is an appendix of the ''Waste Management Description Project, Revision 1''. This appendix is about the interim approach for the technical baseline of the waste management system. It describes the documentation and regulations of the waste management system requirements and description. (MB)

  4. AHTR Refueling Systems and Process Description

    Energy Technology Data Exchange (ETDEWEB)

    Varma, V.K.; Holcomb, D.E.; Bradley, E.C.; Zaharia, N.M.; Cooper, E.J.

    2012-07-15

    The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt–cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy’s Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published [1], and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the

  5. AHTR Refueling Systems and Process Description

    Energy Technology Data Exchange (ETDEWEB)

    Varma, Venugopal Koikal [ORNL; Holcomb, David Eugene [ORNL; Bradley, Eric Craig [ORNL; Zaharia, Nathaniel M [ORNL; Cooper, Eliott J [ORNL

    2012-07-01

    The Advanced High-Temperature Reactor (AHTR) is a design concept for a central station-type [1500 MW(e)] Fluoride salt-cooled High-temperature Reactor (FHR) that is currently undergoing development by Oak Ridge National Laboratory for the US. Department of Energy, Office of Nuclear Energy's Advanced Reactor Concepts program. FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The overall goal of the AHTR development program is to demonstrate the technical feasibility of FHRs as low-cost, large-size power producers while maintaining full passive safety. The AHTR is approaching a preconceptual level of maturity. An initial integrated layout of its major systems, structures, and components (SSCs), and an initial, high-level sequence of operations necessary for constructing and operating the plant is nearing completion. An overview of the current status of the AHTR concept has been recently published and a report providing a more detailed overview of the AHTR structures and mechanical systems is currently in preparation. This report documents the refueling components and processes envisioned at this early development phase. The report is limited to the refueling aspects of the AHTR and does not include overall reactor or power plant design information. The report, however, does include a description of the materials envisioned for the various components and the instrumentation necessary to control the refueling process. The report begins with an overview of the refueling strategy. Next a mechanical description of the AHTR fuel assemblies and core is provided. The reactor vessel upper assemblies are then described. Following this the refueling path structures and the refueling mechanisms and components are described. The sequence of operations necessary to fuel and defuel the reactor is then discussed. The report concludes with a discussion of the

  6. Including subjectivity in the teaching of Psychopathology

    Directory of Open Access Journals (Sweden)

    Octavio Domont de Serpa Junior

    2007-01-01

    Full Text Available Current psychopathology studies have often been presented in their descriptive dimension. This perspective is important for teaching because it helps the students to recognize and identify the symptomatology of each psychopathology case. However, subjectivity, the experience of suffering and interpersonal aspects are all lost in this perspective. Coming from another psychopathology tradition - existential anthropology - this paper presents practical psychopathology teaching experience which considers such dimensions as being relevant to the understanding of mental suffering. The features and limitations of such traditions are briefly reviewed to support this teaching experience. Two new modalities of practical teaching, used in the discipline of "Special Psychopathology I" offered by the Department of Psychiatry and Forensic Medicine at the medical school of the Federal University of Rio de Janeiro for students of psychology, will be presented according to descriptive case study methodology. With these activities we also expect to change the practice of teaching. Traditionally, interviewing of in-patients by a large group of students who observe passively what is happening is the center of this kind of education. We intend to develop a model of teaching which is closer to the proposal of the Brazilian Psychiatric Reform which views mental illness as a complex phenomenon, always involving the relationship that the subject establishes with the world.

  7. Audio Description as a Pedagogical Tool

    Directory of Open Access Journals (Sweden)

    Georgina Kleege

    2015-05-01

    Full Text Available Audio description is the process of translating visual information into words for people who are blind or have low vision. Typically such description has focused on films, museum exhibitions, images and video on the internet, and live theater. Because it allows people with visual impairments to experience a variety of cultural and educational texts that would otherwise be inaccessible, audio description is a mandated aspect of disability inclusion, although it remains markedly underdeveloped and underutilized in our classrooms and in society in general. Along with increasing awareness of disability, audio description pushes students to practice close reading of visual material, deepen their analysis, and engage in critical discussions around the methodology, standards and values, language, and role of interpretation in a variety of academic disciplines. We outline a few pedagogical interventions that can be customized to different contexts to develop students' writing and critical thinking skills through guided description of visual material.

  8. Academic dishonesty among nursing students: a descriptive study.

    Science.gov (United States)

    Keçeci, Ayla; Bulduk, Serap; Oruç, Deniz; Çelik, Serpil

    2011-09-01

    This descriptive and cross-sectional study aims to evaluate academic dishonesty among university nursing students in Turkey. The study's sample included 196 students. Two instruments were used for gathering data. The first instrument, a questionnaire, which included some socio-demographic variables (age, class, gender, education, family structure, parents' attitude and educators' attitude) formed the first part. The second part included the Academic Dishonesty Tendency Scale developed by Eminoğlu and Nartgün. The data were analyzed using descriptive statistics and Kruskall Wallis, One-way Anova, t- test and Mann-Whitney U test. It was found that academic dishonesty was at medium-level (2.60-3.39) in nursing students.

  9. Description of the COMRADEX code

    International Nuclear Information System (INIS)

    Spangler, G.W.; Boling, M.; Rhoades, W.A.; Willis, C.A.

    1967-01-01

    The COMRADEX Code is discussed briefly and instructions are provided for the use of the code. The subject code was developed for calculating doses from hypothetical power reactor accidents. It permits the user to analyze four successive levels of containment with time-varying leak rates. Filtration, cleanup, fallout and plateout in each containment shell can also be analyzed. The doses calculated include the direct gamma dose from the containment building, the internal doses to as many as 14 organs including the thyroid, bone, lung, etc. from inhaling the contaminated air, and the external gamma doses from the cloud. While further improvements are needed, such as a provision for calculating doses from fallout, rainout and washout, the present code capabilities have a wide range of applicability for reactor accident analysis

  10. Ground Control System Description Document

    International Nuclear Information System (INIS)

    Eric Loros

    2001-01-01

    The Ground Control System contributes to the safe construction and operation of the subsurface facility, including accesses and waste emplacement drifts, by maintaining the configuration and stability of the openings during construction, development, emplacement, and caretaker modes for the duration of preclosure repository life. The Ground Control System consists of ground support structures installed within the subsurface excavated openings, any reinforcement made to the rock surrounding the opening, and inverts if designed as an integral part of the system. The Ground Control System maintains stability for the range of geologic conditions expected at the repository and for all expected loading conditions, including in situ rock, construction, operation, thermal, and seismic loads. The system maintains the size and geometry of operating envelopes for all openings, including alcoves, accesses, and emplacement drifts. The system provides for the installation and operation of sensors and equipment for any required inspection and monitoring. In addition, the Ground Control System provides protection against rockfall for all subsurface personnel, equipment, and the engineered barrier system, including the waste package during the preclosure period. The Ground Control System uses materials that are sufficiently maintainable and that retain the necessary engineering properties for the anticipated conditions of the preclosure service life. These materials are also compatible with postclosure waste isolation performance requirements of the repository. The Ground Control System interfaces with the Subsurface Facility System for operating envelopes, drift orientation, and excavated opening dimensions, Emplacement Drift System for material compatibility, Monitored Geologic Repository Operations Monitoring and Control System for ground control instrument readings, Waste Emplacement/Retrieval System to support waste emplacement operations, and the Subsurface Excavation System

  11. AGRIS: Description of computer programs

    International Nuclear Information System (INIS)

    Schmid, H.; Schallaboeck, G.

    1976-01-01

    The set of computer programs used at the AGRIS (Agricultural Information System) Input Unit at the IAEA, Vienna, Austria to process the AGRIS computer-readable data is described. The processing flow is illustrated. The configuration of the IAEA's computer, a list of error messages generated by the computer, the EBCDIC code table extended for AGRIS and INIS, the AGRIS-6 bit code, the work sheet format, and job control listings are included as appendixes. The programs are written for an IBM 370, model 145, operating system OS or VS, and require a 130K partition. The programming languages are PL/1 (F-compiler) and Assembler

  12. KALIMER fuel system preliminary design description

    International Nuclear Information System (INIS)

    Hwang, Woan; Lee, B.O.; Nam, C.; Paek, S.K.

    1998-10-01

    This document provides general design concepts, design basis, preliminary design specification and design technologies which are needed for designing the fuel/non-fuel rods and assembly ducts of the KALIMER fuel system. The core of LMFBR consists of driver fuel assembly, blanket assembly, reflector assembly, shielding assembly, control assembly and GEM (Gas Expansion Module) as well as USS, dummy assembly, detector assembly. These core components must be designed to withstand the high temperature, high flux for a long irradiation exposure time. Due to the high temperature and high flux, irradiation creep and swelling as well as thermal-mechanical deformation are occurred at the fuel/non-fuel system and cause the deformations of materials and the geometric deflections at fuel/non-fuel rods, assembly ducts and components. In order to overcome these intricate phenomena through the engineering design, the design basis including theoretical analysis methodologies and design considerations, material characteristics of fuel system, and the specifications and drawings of fuel/non-fuel rods and assembly ducts, respectively, are presented. This document is preliminary design description which is produced in the conceptual design stage, and does not present the detailed and finalized design data which can be for the manufacturing. (author). 22 refs

  13. Transmutation Fuel Campaign Description and Status

    International Nuclear Information System (INIS)

    Jon Carmack; Kemal O. Pasamehmetoglu

    2008-01-01

    This report contains a technical summary package in response to a Level 2 milestone in the transmutation fuel campaign (TFC) management work-package calling for input to the Secretarial decision. At present, the form of the Secretarial decision package is not fully defined, and it is not clear exactly what will be required from the TFC as a final input. However, it is anticipated that a series of technical and programmatic documents will need to be provided in support of a wider encompassing document on GNEP technology development activities. The TFC technical leadership team provides this report as initial input to the secretarial decision package which is being developed by the Technical Integration Office (TIO) in support of Secretarial decision. This report contains a summary of the TFC execution plan with a work breakdown structure, high level schedule, major milestones, and summary description of critical activities in support of campaign objectives. Supporting documents referenced in this report but provided under separate cover include: (1) An updated review of the state-of-the art for transmutation fuel development activities considering national as well as international fuel research and development testing activities. (2) A definition of the Technology Readiness Level (TRL) used to systematically define and execute the transmutation fuel development activities

  14. Chiropractic and CAM Utilization: A Descriptive Review

    Directory of Open Access Journals (Sweden)

    Meeker William C

    2007-01-01

    Full Text Available Abstract Objective To conduct a descriptive review of the scientific literature examining use rates of modalities and procedures used by CAM clinicians to manage chronic LBP and other conditions Data Sources A literature of PubMed and MANTIS was performed using the key terms Chiropractic; Low Back Pain; Utilization Rate; Use Rate; Complementary and Alternative Medicine; and Health Services in various combinations. Data Selection A total of 137 papers were selected, based upon including information about chiropractic utilization, CAM utilization and low back pain and other conditions. Data Synthesis Information was extracted from each paper addressing use of chiropractic and CAM, and is summarized in tabular form. Results Thematic analysis of the paper topics indicated that there were 5 functional areas covered by the literature: back pain papers, general chiropractic papers, insurance-related papers, general CAM-related papers; and worker's compensation papers. Conclusion Studies looking at chiropractic utilization demonstrate that the rates vary, but generally fall into a range from around 6% to 12% of the population, most of whom seek chiropractic care for low back pain and not for organic disease or visceral dysfunction. CAM is itself used by people suffering from a variety of conditions, though it is often used not as a primary intervention, but rather as an additional form of care. CAM and chiropractic often offer lower costs for comparable results compared to conventional medicine.

  15. Description of an open quantum mechanical system

    International Nuclear Information System (INIS)

    Rotter, I.; Forschungszentrum Rossendorf e.V.

    1994-05-01

    A model for the description of an open quantum mechanical many-particle system is formulated. It starts from the shell model and treats the continuous states by a coupled channels method. The mixing of the discrete shell model states via the continuum of decay channels results in the genuine decaying states of the system. These states are eigenstates of a non-Hermitean Hamilton operator the eigenvalues of which give both the energies and the widths of the states. All correlations between two particles which are caused by the two-particle residual interaction, are taken into account including those via the continuum. In the formalism describing the open quantum mechanical system, the coupling between the system and its environment appears nonlinearly. If the resonance states start to overlap, a redistribution of the spectroscopic values ('trapping effect') takes place. As a result, the complexity of the system is reduced at high level density, structures in space and time are formed. This redistribution describes, on the one hand, the transition from the well-known nuclear properties at low level density to those at high level density and fits, on the other hand, into the concept of selforganization. (orig.)

  16. Improved motion description for action classification

    Directory of Open Access Journals (Sweden)

    Mihir eJain

    2016-01-01

    Full Text Available Even though the importance of explicitly integrating motion characteristics in video descriptions has been demonstrated by several recent papers on action classification, our current work concludes that adequately decomposing visual motion into dominant and residual motions, i.e.: camera and scene motion, significantly improves action recognition algorithms. This holds true both for the extraction of the space-time trajectories and for computation of descriptors.We designed a new motion descriptor – the DCS descriptor – that captures additional information on local motion patterns enhancing results based on differential motion scalar quantities, divergence, curl and shear features. Finally, applying the recent VLAD coding technique proposed in image retrieval provides a substantial improvement for action recognition. These findings are complementary to each other and they outperformed all previously reported results by a significant margin on three challenging datasets: Hollywood 2, HMDB51 and Olympic Sports as reported in (Jain et al. (2013. These results were further improved by (Oneata et al. (2013; Wang and Schmid (2013; Zhu et al. (2013 through the use of the Fisher vector encoding. We therefore also employ Fisher vector in this paper and we further enhance our approach by combining trajectories from both optical flow and compensated flow. We as well provide additional details of DCS descriptors, including visualization. For extending the evaluation, a novel dataset with 101 action classes, UCF101, was added.

  17. Chiropractic and CAM utilization: a descriptive review.

    Science.gov (United States)

    Lawrence, Dana J; Meeker, William C

    2007-01-22

    To conduct a descriptive review of the scientific literature examining use rates of modalities and procedures used by CAM clinicians to manage chronic LBP and other conditions A literature of PubMed and MANTIS was performed using the key terms Chiropractic; Low Back Pain; Utilization Rate; Use Rate; Complementary and Alternative Medicine; and Health Services in various combinations. A total of 137 papers were selected, based upon including information about chiropractic utilization, CAM utilization and low back pain and other conditions. Information was extracted from each paper addressing use of chiropractic and CAM, and is summarized in tabular form. Thematic analysis of the paper topics indicated that there were 5 functional areas covered by the literature: back pain papers, general chiropractic papers, insurance-related papers, general CAM-related papers; and worker's compensation papers. Studies looking at chiropractic utilization demonstrate that the rates vary, but generally fall into a range from around 6% to 12% of the population, most of whom seek chiropractic care for low back pain and not for organic disease or visceral dysfunction. CAM is itself used by people suffering from a variety of conditions, though it is often used not as a primary intervention, but rather as an additional form of care. CAM and chiropractic often offer lower costs for comparable results compared to conventional medicine.

  18. Soft Biometrics; Human Identification Using Comparative Descriptions.

    Science.gov (United States)

    Reid, Daniel A; Nixon, Mark S; Stevenage, Sarah V

    2014-06-01

    Soft biometrics are a new form of biometric identification which use physical or behavioral traits that can be naturally described by humans. Unlike other biometric approaches, this allows identification based solely on verbal descriptions, bridging the semantic gap between biometrics and human description. To permit soft biometric identification the description must be accurate, yet conventional human descriptions comprising of absolute labels and estimations are often unreliable. A novel method of obtaining human descriptions will be introduced which utilizes comparative categorical labels to describe differences between subjects. This innovative approach has been shown to address many problems associated with absolute categorical labels-most critically, the descriptions contain more objective information and have increased discriminatory capabilities. Relative measurements of the subjects' traits can be inferred from comparative human descriptions using the Elo rating system. The resulting soft biometric signatures have been demonstrated to be robust and allow accurate recognition of subjects. Relative measurements can also be obtained from other forms of human representation. This is demonstrated using a support vector machine to determine relative measurements from gait biometric signatures-allowing retrieval of subjects from video footage by using human comparisons, bridging the semantic gap.

  19. Standarized input for Hanford environmental impact statements. Part II: site description

    International Nuclear Information System (INIS)

    Jamison, J.D.

    1982-07-01

    Information is presented under the following section headings: summary description; location and physiography; geology; seismology; hydrology; meteorology; ecology; demography and land use; and radiological condition. Five appendixes are included on the 100N, 200 east, 200 west, 300, and 400 areas. This report is intended to provide a description of the Hanford Site against which the environmental impacts of new projects at Hanford can be assessed. It is expected that the summary description amplified with material from the appropriate appendix, will serve as the basic site description section of environmental impact statements prepared to address the requirements of the National Environmental Policy Act

  20. Standarized input for Hanford environmental impact statements. Part II: site description

    Energy Technology Data Exchange (ETDEWEB)

    Jamison, J.D.

    1982-07-01

    Information is presented under the following section headings: summary description; location and physiography; geology; seismology; hydrology; meteorology; ecology; demography and land use; and radiological condition. Five appendixes are included on the 100N, 200 east, 200 west, 300, and 400 areas. This report is intended to provide a description of the Hanford Site against which the environmental impacts of new projects at Hanford can be assessed. It is expected that the summary description amplified with material from the appropriate appendix, will serve as the basic site description section of environmental impact statements prepared to address the requirements of the National Environmental Policy Act (NEPA).

  1. Subsurface Facility System Description Document

    International Nuclear Information System (INIS)

    Eric Loros

    2001-01-01

    The Subsurface Facility System encompasses the location, arrangement, size, and spacing of the underground openings. This subsurface system includes accesses, alcoves, and drifts. This system provides access to the underground, provides for the emplacement of waste packages, provides openings to allow safe and secure work conditions, and interfaces with the natural barrier. This system includes what is now the Exploratory Studies Facility. The Subsurface Facility System physical location and general arrangement help support the long-term waste isolation objectives of the repository. The Subsurface Facility System locates the repository openings away from main traces of major faults, away from exposure to erosion, above the probable maximum flood elevation, and above the water table. The general arrangement, size, and spacing of the emplacement drifts support disposal of the entire inventory of waste packages based on the emplacement strategy. The Subsurface Facility System provides access ramps to safely facilitate development and emplacement operations. The Subsurface Facility System supports the development and emplacement operations by providing subsurface space for such systems as ventilation, utilities, safety, monitoring, and transportation

  2. A Test of Strategies for Enhanced Learning of AP Descriptive Chemistry

    Science.gov (United States)

    Kotcherlakota, Suhasini; Brooks, David W.

    2008-01-01

    The Advanced Placement (AP) Descriptive Chemistry Website allows users to practice chemistry problems. This study involved the redesign of the Website using worked examples to enhance learner performance. The population sample for the study includes users (students and teachers) interested in learning descriptive chemistry materials. The users…

  3. Impact of Performance Feedback Delivered via Electronic Mail on Preschool Teachers' Use of Descriptive Praise

    Science.gov (United States)

    Hemmeter, Mary Louise; Snyder, Patricia; Kinder, Kiersten; Artman, Kathleen

    2011-01-01

    We examined the effects of a professional development intervention that included data-based performance feedback delivered via electronic mail (e-mail) on preschool teachers' use of descriptive praise and whether increased use of descriptive praise was associated with changes in classroom-wide measures of child engagement and challenging behavior.…

  4. Crosswalking EAD: Collaboration in Archival Description

    Directory of Open Access Journals (Sweden)

    Amy McCrory

    2005-09-01

    Full Text Available Different library departments must work together, both formally and informally, in implementing encoded archival description and in repackaging descriptive information about archival collections to other formats, particularly machine-readable cataloging. The authors, one a technical services librarian and the other a special collections archivist, describe their experiences collaborating in these processes at The Ohio State University. Although other institutions may differ in their organizational structure, the authors hope to provide technical guidance, as well as a model of collaboration between archivists and technical services personnel. Careful dialogue and planning are essential to transcend the traditional divide between archival and library descriptive practices and systems.

  5. Information resource description creating and managing metadata

    CERN Document Server

    Hider, Philip

    2012-01-01

    An overview of the field of information organization that examines resource description as both a product and process of the contemporary digital environment.This timely book employs the unifying mechanism of the semantic web and the resource description framework to integrate the various traditions and practices of information and knowledge organization. Uniquely, it covers both the domain-specific traditions and practices and the practices of the ?metadata movement' through a single lens ? that of resource description in the broadest, semantic web sense.This approach more readily accommodate

  6. 1995 Baseline solid waste management system description

    International Nuclear Information System (INIS)

    Anderson, G.S.; Konynenbelt, H.S.

    1995-09-01

    This provides a detailed solid waste system description that documents the treatment, storage, and disposal (TSD) strategy for managing Hanford's solid low-level waste, low-level mixed waste, transuranic and transuranic mixed waste, and greater-than-Class III waste. This system description is intended for use by managers of the solid waste program, facility and system planners, as well as system modelers. The system description identifies the TSD facilities that constitute the solid waste system and defines these facilities' interfaces, schedules, and capacities. It also provides the strategy for treating each of the waste streams generated or received by the Hanford Site from generation or receipt through final destination

  7. Respiratory Protection Program. Programmatic description

    Energy Technology Data Exchange (ETDEWEB)

    Brooks, J.M.; Porter, W.E.

    1986-03-01

    The ORNL Respirator Program is designed to provide employees with devices which afford maximum protection with minimum inconvenience and discomfort. Teamwork is essential since a comprehensive program involves the Medical Department, the Industrial Hygiene Department, Radiation and Safety Surveys, the Operations Division, Quality Assurance and Inspection, and the Fire Department. The purpose of this manual is to describe in detail the ORNL Respirator Program. Included are discussions of the following elements: quality assurance, selection, fit-testing, maintenance and issue, certified breathing air for self-contained breathing apparatus, inspection, program surveillance, available devices, and standard operating procedures. As program modifications develop and improvements are made, periodic revisions may be necessary. The Industrial Hygiene Department will perform this task on an ''as required'' basis.

  8. Distinguishing Features and Similarities Between Descriptive Phenomenological and Qualitative Description Research.

    Science.gov (United States)

    Willis, Danny G; Sullivan-Bolyai, Susan; Knafl, Kathleen; Cohen, Marlene Z

    2016-09-01

    Scholars who research phenomena of concern to the discipline of nursing are challenged with making wise choices about different qualitative research approaches. Ultimately, they want to choose an approach that is best suited to answer their research questions. Such choices are predicated on having made distinctions between qualitative methodology, methods, and analytic frames. In this article, we distinguish two qualitative research approaches widely used for descriptive studies: descriptive phenomenological and qualitative description. Providing a clear basis that highlights the distinguishing features and similarities between descriptive phenomenological and qualitative description research will help students and researchers make more informed choices in deciding upon the most appropriate methodology in qualitative research. We orient the reader to distinguishing features and similarities associated with each approach and the kinds of research questions descriptive phenomenological and qualitative description research address. © The Author(s) 2016.

  9. 42 CFR 410.100 - Included services.

    Science.gov (United States)

    2010-10-01

    ... service; however, maintenance therapy itself is not covered as part of these services. (c) Occupational... increase respiratory function, such as graded activity services; these services include physiologic... rehabilitation plan of treatment, including physical therapy services, occupational therapy services, speech...

  10. Static, Lightweight Includes Resolution for PHP

    NARCIS (Netherlands)

    M.A. Hills (Mark); P. Klint (Paul); J.J. Vinju (Jurgen)

    2014-01-01

    htmlabstractDynamic languages include a number of features that are challenging to model properly in static analysis tools. In PHP, one of these features is the include expression, where an arbitrary expression provides the path of the file to include at runtime. In this paper we present two

  11. Article Including Environmental Barrier Coating System

    Science.gov (United States)

    Lee, Kang N. (Inventor)

    2015-01-01

    An enhanced environmental barrier coating for a silicon containing substrate. The enhanced barrier coating may include a bond coat doped with at least one of an alkali metal oxide and an alkali earth metal oxide. The enhanced barrier coating may include a composite mullite bond coat including BSAS and another distinct second phase oxide applied over said surface.

  12. Rare thoracic cancers, including peritoneum mesothelioma

    NARCIS (Netherlands)

    Siesling, Sabine; van der Zwan, Jan Maarten; Izarzugaza, Isabel; Jaal, Jana; Treasure, Tom; Foschi, Roberto; Ricardi, Umberto; Groen, Harry; Tavilla, Andrea; Ardanaz, Eva

    Rare thoracic cancers include those of the trachea, thymus and mesothelioma (including peritoneum mesothelioma). The aim of this study was to describe the incidence, prevalence and survival of rare thoracic tumours using a large database, which includes cancer patients diagnosed from 1978 to 2002,

  13. Rare thoracic cancers, including peritoneum mesothelioma

    NARCIS (Netherlands)

    Siesling, Sabine; Zwan, J.M.V.D.; Izarzugaza, I.; Jaal, J.; Treasure, T.; Foschi, R.; Ricardi, U.; Groen, H.; Tavilla, A.; Ardanaz, E.

    2012-01-01

    Rare thoracic cancers include those of the trachea, thymus and mesothelioma (including peritoneum mesothelioma). The aim of this study was to describe the incidence, prevalence and survival of rare thoracic tumours using a large database, which includes cancer patients diagnosed from 1978 to 2002,

  14. Scripps Sediment Description File- OCSEAP Portion

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Scripps Institution of Oceanography compiled descriptions of sediment samples in the Alaskan Outer Continental Shelf area, funded through the NOAA Outer...

  15. Reachability modules for the description logic SRIQ

    CSIR Research Space (South Africa)

    Nortje, R

    2013-12-01

    Full Text Available In this paper we investigate module extraction for the Description Logic SRIQ. We formulate modules in terms of the reachability problem for directed hypergraphs. Using inseperability relations, we investigate the module-theoretic properties...

  16. SIO Ferromanganese Nodule Description file - IDOE Portion

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Scripps Institution of Oceanography compiled descriptions of sediment samples related to ferromanganese deposits, funded through the International Decade of...

  17. Quantum State Description Complexity (Invited Talk)

    OpenAIRE

    Vazirani, Umesh V.

    2011-01-01

    Quantum states generally require exponential sized classical descriptions, but the long conjectured area law provides hope that a large class of natural quantum states can be described succinctly. Recent progress in formally proving the area law is described.

  18. Integrated Visualisation and Description of Complex Systems

    National Research Council Canada - National Science Library

    Goodburn, D

    1999-01-01

    .... Guided by a conceptual model of a description process that is driven by user information needs within a domain context, the approach incorporates the use of novel visualization techniques based...

  19. Mining skeletal phenotype descriptions from scientific literature.

    Directory of Open Access Journals (Sweden)

    Tudor Groza

    Full Text Available Phenotype descriptions are important for our understanding of genetics, as they enable the computation and analysis of a varied range of issues related to the genetic and developmental bases of correlated characters. The literature contains a wealth of such phenotype descriptions, usually reported as free-text entries, similar to typical clinical summaries. In this paper, we focus on creating and making available an annotated corpus of skeletal phenotype descriptions. In addition, we present and evaluate a hybrid Machine Learning approach for mining phenotype descriptions from free text. Our hybrid approach uses an ensemble of four classifiers and experiments with several aggregation techniques. The best scoring technique achieves an F-1 score of 71.52%, which is close to the state-of-the-art in other domains, where training data exists in abundance. Finally, we discuss the influence of the features chosen for the model on the overall performance of the method.

  20. Description of Sizewell B nuclear power plant

    International Nuclear Information System (INIS)

    Meyer, G.; Stokke, E.

    1997-09-01

    The intention of this report is to present a condensed technical description of Sizewell B in a language understandable to non-technical personnel. It is unavoidable that some parts will be less precise than the technically initiated would like to see, but hopefully the content still give a realistic picture of Sizewell B. The technical description is based on publicly available material, of which the Sizewell B safety report has been particularly useful. Nearly all figures and drawings found in this description are reproductions of corresponding material in the safety report. To keep the description from becoming too voluminous it has been necessary to condense some background material down to a small volume. Hopefully this has not introduced any errors or inaccuracies, possible oversimplification at certain points must be weighed against the wish to cover most of the topics in the agreed table of contents for these NKS reports. (au)

  1. Deep hierarchical attention network for video description

    Science.gov (United States)

    Li, Shuohao; Tang, Min; Zhang, Jun

    2018-03-01

    Pairing video to natural language description remains a challenge in computer vision and machine translation. Inspired by image description, which uses an encoder-decoder model for reducing visual scene into a single sentence, we propose a deep hierarchical attention network for video description. The proposed model uses convolutional neural network (CNN) and bidirectional LSTM network as encoders while a hierarchical attention network is used as the decoder. Compared to encoder-decoder models used in video description, the bidirectional LSTM network can capture the temporal structure among video frames. Moreover, the hierarchical attention network has an advantage over single-layer attention network on global context modeling. To make a fair comparison with other methods, we evaluate the proposed architecture with different types of CNN structures and decoders. Experimental results on the standard datasets show that our model has a more superior performance than the state-of-the-art techniques.

  2. An Application for Descriptive Nearness: Iris Recognition

    Directory of Open Access Journals (Sweden)

    Polat Kadirhan

    2017-12-01

    Full Text Available Near Set Theory has various applications in the literature. In this paper, using the concept descriptive nearness, we show how to perform iris recognition. This process has a few algorithms given via Mathematica Script Language.

  3. Defeasible inheritance-based description logics

    CSIR Research Space (South Africa)

    Casini, G

    2013-01-01

    Full Text Available of Artificial Intelligence Research 2013 Defeasible Inheritance-based Description Logics Giovanni Casini GCASINI@CSIR.CO.ZA Centre for Artificial Intelligence Research (CAIR), CSIR Meraka Institute and UKZN, South Africa Umberto Straccia UMBERTO...

  4. 49 CFR 587.6 - General description.

    Science.gov (United States)

    2010-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Side Impact Moving Deformable Barrier § 587.6 General description. (a) The moving deformable barrier consists of component parts and...

  5. Nonminimal description of spin 3/2

    International Nuclear Information System (INIS)

    Tybor, W.

    1988-01-01

    The nonminimal description (with the help of the antisymmetric tensor-bispinor) of the spin 3/2, equivalent to the Rarita-Schwinger theory, is given. The variational principle is formulated. 5 refs. (author)

  6. Towards practical defeasible reasoning for description logics

    CSIR Research Space (South Africa)

    Casini, G

    2013-07-01

    Full Text Available The formalisation of defeasible reasoning in automated systems is becoming increasingly important. Description Logics (DLs) are nowadays the main logical formalism in the field of formal ontologies. Our focus in this paper is to devise a practical...

  7. Rock Visualization System. Technical description (RVS v.3.5)

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, P.; Elfstroem, M.; Markstroem, I. [FB Engineering, Goeteborg (Sweden)

    2004-03-01

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. It is a description of RVS version 3.5. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples; Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

  8. HGVS Recommendations for the Description of Sequence Variants: 2016 Update.

    Science.gov (United States)

    den Dunnen, Johan T; Dalgleish, Raymond; Maglott, Donna R; Hart, Reece K; Greenblatt, Marc S; McGowan-Jordan, Jean; Roux, Anne-Francoise; Smith, Timothy; Antonarakis, Stylianos E; Taschner, Peter E M

    2016-06-01

    The consistent and unambiguous description of sequence variants is essential to report and exchange information on the analysis of a genome. In particular, DNA diagnostics critically depends on accurate and standardized description and sharing of the variants detected. The sequence variant nomenclature system proposed in 2000 by the Human Genome Variation Society has been widely adopted and has developed into an internationally accepted standard. The recommendations are currently commissioned through a Sequence Variant Description Working Group (SVD-WG) operating under the auspices of three international organizations: the Human Genome Variation Society (HGVS), the Human Variome Project (HVP), and the Human Genome Organization (HUGO). Requests for modifications and extensions go through the SVD-WG following a standard procedure including a community consultation step. Version numbers are assigned to the nomenclature system to allow users to specify the version used in their variant descriptions. Here, we present the current recommendations, HGVS version 15.11, and briefly summarize the changes that were made since the 2000 publication. Most focus has been on removing inconsistencies and tightening definitions allowing automatic data processing. An extensive version of the recommendations is available online, at http://www.HGVS.org/varnomen. © 2016 WILEY PERIODICALS, INC.

  9. Relational description of the measurement process in quantum field theory

    International Nuclear Information System (INIS)

    Gambini, Rodolfo; Porto, Rafael A.

    2002-01-01

    We have recently introduced a realistic, covariant, interpretation for the reduction process in relativistic quantum mechanics. The basic problem for a covariant description is the dependence of the states on the frame within which collapse takes place. A suitable use of the causal structure of the devices involved in the measurement process allowed us to introduce a covariant notion for the collapse of quantum states. However, a fully consistent description in the relativistic domain requires the extension of the interpretation to quantum fields. The extension is far from straightforward. Besides the obvious difficulty of dealing with the infinite degrees of freedom of the field theory, one has to analyse the restrictions imposed by causality concerning the allowed operations in a measurement process. In this paper we address these issues. We shall show that, in the case of partial causally connected measurements, our description allows us to include a wider class of causal operations than the one resulting from the standard way of computing conditional probabilities. This alternative description could be experimentally tested. A verification of this proposal would give stronger support to the realistic interpretations of the states in quantum mechanics. (author)

  10. A proposed descriptive methodology for environmental geologic (envirogeologic) site characterization

    International Nuclear Information System (INIS)

    Schwarz, D.L.; Snyder, W.S.

    1994-01-01

    We propose a descriptive methodology for use in environmental geologic (envirogeologic) site characterization. The method uses traditional sedimentologic descriptions augmented by environmental data needs, and facies analysis. Most other environmental methodologies for soil and sediment characterization use soil engineering and engineering geology techniques that classify by texture and engineering properties. This technique is inadequate for envirogeologic characterization of sediments. In part, this inadequacy is due to differences in the grain-size between the Unified soil Classification and the Udden-Wentworth scales. Use of the soil grain-size classification could easily cause confusion when attempting to relate descriptions based on this classification to our basic understanding of sedimentary depositional systems. The proposed envirogeologic method uses descriptive parameters to characterize a sediment sample, suggests specific tests on samples for adequate characterization, and provides a guidelines for subsurface facies analysis, based on data retrieved from shallow boreholes, that will allow better predictive models to be developed. This methodology should allow for both a more complete site assessment, and provide sufficient data for selection of the appropriate remediation technology, including bioremediation. 50 refs

  11. Rock Visualization System. Technical description (RVS v.3.5)

    International Nuclear Information System (INIS)

    Curtis, P.; Elfstroem, M.; Markstroem, I.

    2004-03-01

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. It is a description of RVS version 3.5. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples; Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system

  12. Effective Conformal Descriptions of Black Hole Entropy

    Directory of Open Access Journals (Sweden)

    Steven Carlip

    2011-07-01

    Full Text Available It is no longer considered surprising that black holes have temperatures and entropies. What remains surprising, though, is the universality of these thermodynamic properties: their exceptionally simple and general form, and the fact that they can be derived from many very different descriptions of the underlying microscopic degrees of freedom. I review the proposal that this universality arises from an approximate conformal symmetry, which permits an effective “conformal dual” description that is largely independent of the microscopic details.

  13. Description of hadrons using string theory

    International Nuclear Information System (INIS)

    Sugimoto, Shigeki

    2013-01-01

    We give a brief overview of 'holographic QCD' for JPS members. Applying the idea of gauge/string duality to QCD, We obtain a description of hadrons based on string theory. Using this description, a lot of properties of hadrons can be analyzed and the results are in reasonable agreement with the observations. We try to explain the basic idea and some of the interesting results in a way accessible to non-experts. (author)

  14. Description of Measurements on Biogas Stations

    Directory of Open Access Journals (Sweden)

    Ladislav Novosád

    2016-08-01

    Full Text Available This paper focuses mainly on performance analysis for three biogas stations situated within the territory of the Czech Republic. This paper contains basic details of the individual biogas stations as well as description of their types. It also refers to the general description of the measurement gauge involved, with specifications of its potential use. The final part of this paper deals with the analysis of course data obtained, with special regard to voltage, current, active power and reactive power data.

  15. Description and search labor for information retrieval

    OpenAIRE

    Warner, Julian

    2007-01-01

    Selection power is taken as the fundamental value for information retrieval systems. Selection power is regarded as produced by selection labor, which itself separates historically into description and search labor. As forms of mental labor, description and search labor participate in the conditions for labor and for mental labor. Concepts and distinctions applicable to physical and mental labor are indicated, introducing the necessity of labor for survival, the idea of technology as a human ...

  16. Semantic Description of IoT Security for Smart Grid

    OpenAIRE

    Ayele, Getinet

    2017-01-01

    Master's thesis Information- and communication technology IKT590 - University of Agder 2017 This research work proposed, developed and evaluated IoT Security ontology for smart home energy management system (SHEMS) in smart grids. The ontology description includes infrastructure, attacks, vulnerabilities and counter measures for the main components of SHEMS such as Smart Meter, Smart Appliance, Home Gateway, and Billing data. The ontology extends the SAREF energy management ontology with s...

  17. A Statistical Primer: Understanding Descriptive and Inferential Statistics

    OpenAIRE

    Gillian Byrne

    2007-01-01

    As libraries and librarians move more towards evidence‐based decision making, the data being generated in libraries is growing. Understanding the basics of statistical analysis is crucial for evidence‐based practice (EBP), in order to correctly design and analyze researchas well as to evaluate the research of others. This article covers the fundamentals of descriptive and inferential statistics, from hypothesis construction to sampling to common statistical techniques including chi‐square, co...

  18. Baseline descriptions for LWR spent fuel storage, handling, and transportation

    International Nuclear Information System (INIS)

    Moyer, J.W.; Sonnier, C.S.

    1978-04-01

    Baseline descriptions for the storage, handling, and transportation of reactor spent fuel are provided. The storage modes described include light water reactor (LWR) pools, away-from-reactor basins, dry surface storage, reprocessing-facility interim storage pools, and deep geologic storage. Land and water transportation are also discussed. This work was sponsored by the Department of Energy/Office of Safeguards and Security as part of the Sandia Laboratories Fixed Facility Physical Protection Program. 45 figs, 4 tables

  19. Baseline descriptions for LWR spent fuel storage, handling, and transportation

    Energy Technology Data Exchange (ETDEWEB)

    Moyer, J.W.; Sonnier, C.S.

    1978-04-01

    Baseline descriptions for the storage, handling, and transportation of reactor spent fuel are provided. The storage modes described include light water reactor (LWR) pools, away-from-reactor basins, dry surface storage, reprocessing-facility interim storage pools, and deep geologic storage. Land and water transportation are also discussed. This work was sponsored by the Department of Energy/Office of Safeguards and Security as part of the Sandia Laboratories Fixed Facility Physical Protection Program. 45 figs, 4 tables.

  20. Generic task problem descriptions: Category B, C, and D tasks

    International Nuclear Information System (INIS)

    1978-06-01

    This document contains information relating to Category B, C, and D generic technical activities. The specific information provided for each task includes the reactor type to which the generic issue applies, the NRC division with lead responsibility and a description of the problem to be addressed by the task. Also provided in this document is a listing of Category A generic technical activities and definitions of Priority Categories A, B, C, and D

  1. Integrated Data Collection Analysis (IDCA) Program: FY2011 Project Descriptions

    Energy Technology Data Exchange (ETDEWEB)

    Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Geoffrey W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States). Indian Head Division; Remmers, Daniel L. [Naval Surface Warfare Center (NSWC-IHD), Indian Head, MD (United States). Indian Head Division; Whinnery, LeRoy L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Shelley, Timothy J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Reyes, Jose A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2012-02-03

    This document provides brief descriptions of research topics for consideration by the IDCA for potential funding in funding in FY 2011. The topics include the utilization of the results from the Proficiency Test developed during FY 2010 to start populating the small-scale safety and thermal testing (SSST) Testing Compendium and revising results from methods modifications. Other research topics were also developed for FY 2011 from issues that arose in the Proficiency Test.

  2. Microscopic descriptions of high-energy heavy-ion collisions

    International Nuclear Information System (INIS)

    Bodmer, A.R.

    1977-01-01

    The essentials of the equation-of-motion (EOM) approach are given and some of its significant and interesting results are described. A framework for the theoretical description of high-energy heavy-ion (HE-HI) collisions is presented; specifically included are a critical assessment of various approaches--EOM calculations, Boltzmann equations/cascade calculations, and hydrodynamics--their relationships and their respective domains of applicability, if any, to HE-HI collisions. 11 figures, 3 tables

  3. ASSEMBLY TRANSFER SYSTEM DESCRIPTION DOCUMENT

    International Nuclear Information System (INIS)

    Gorpani, B.

    2000-01-01

    The Assembly Transfer System (ATS) receives, cools, and opens rail and truck transportation casks from the Carrier/Cask Handling System (CCHS). The system unloads transportation casks consisting of bare Spent Nuclear Fuel (SNF) assemblies, single element canisters, and Dual Purpose Canisters (DPCs). For casks containing DPCs, the system opens the DPCs and unloads the SNF. The system stages the assemblies, transfer assemblies to and from fuel-blending inventory pools, loads them into Disposal Containers (DCs), temporarily seals and inerts the DC, decontaminates the DC and transfers it to the Disposal Container Handling System. The system also prepares empty casks and DPCs for off-site shipment. Two identical Assembly Transfer System lines are provided in the Waste Handling Building (WHB). Each line operates independently to handle the waste transfer throughput and to support maintenance operations. Each system line primarily consists of wet and dry handling areas. The wet handling area includes a cask transport system, cask and DPC preparation system, and a wet assembly handling system. The basket transport system forms the transition between the wet and dry handling areas. The dry handling area includes the dry assembly handling system, assembly drying system, DC preparation system, and DC transport system. Both the wet and dry handling areas are controlled by the control and tracking system. The system operating sequence begins with moving transportation casks to the cask preparation area. The cask preparation operations consist of cask cavity gas sampling, cask venting, cask cool-down, outer lid removal, and inner shield plug lifting fixture attachment. Casks containing bare SNF (no DPC) are filled with water and placed in the cask unloading pool. The inner shield plugs are removed underwater. For casks containing a DPC, the cask lid(s) is removed, and the DPC is penetrated, sampled, vented, and cooled. A DPC lifting fixture is attached and the cask is placed

  4. JSC Orbital Debris Website Description

    Science.gov (United States)

    Johnson, Nicholas L.

    2006-01-01

    Purpose: The website provides information about the NASA Orbital Debris Program Office at JSC, which is the lead NASA center for orbital debris research. It is recognized world-wide for its leadership in addressing orbital debris issues. The NASA Orbital Debris Program Office has taken the international lead in conducting measurements of the environment and in developing the technical consensus for adopting mitigation measures to protect users of the orbital environment. Work at the center continues with developing an improved understanding of the orbital debris environment and measures that can be taken to control its growth. Major Contents: Orbital Debris research is divided into the following five broad efforts. Each area of research contains specific information as follows: 1) Modeling - NASA scientists continue to develop and upgrade orbital debris models to describe and characterize the current and future debris environment. Evolutionary and engineering models are described in detail. Downloadable items include a document in PDF format and executable software. 2) Measurements - Measurements of near-Earth orbital debris are accomplished by conducting ground-based and space-based observations of the orbital debris environment. The data from these sources provide validation of the environment models and identify the presence of new sources. Radar, optical and surface examinations are described. External links to related topics are provided. 3) Protection - Orbital debris protection involves conducting hypervelocity impact measurements to assess the risk presented by orbital debris to operating spacecraft and developing new materials and new designs to provide better protection from the environment with less weight penalty. The data from this work provides the link between the environment defined by the models and the risk presented by that environment to operating spacecraft and provides recommendations on design and operations procedures to reduce the risk as

  5. Qualitative Descriptive Methods in Health Science Research.

    Science.gov (United States)

    Colorafi, Karen Jiggins; Evans, Bronwynne

    2016-07-01

    The purpose of this methodology paper is to describe an approach to qualitative design known as qualitative descriptive that is well suited to junior health sciences researchers because it can be used with a variety of theoretical approaches, sampling techniques, and data collection strategies. It is often difficult for junior qualitative researchers to pull together the tools and resources they need to embark on a high-quality qualitative research study and to manage the volumes of data they collect during qualitative studies. This paper seeks to pull together much needed resources and provide an overview of methods. A step-by-step guide to planning a qualitative descriptive study and analyzing the data is provided, utilizing exemplars from the authors' research. This paper presents steps to conducting a qualitative descriptive study under the following headings: describing the qualitative descriptive approach, designing a qualitative descriptive study, steps to data analysis, and ensuring rigor of findings. The qualitative descriptive approach results in a summary in everyday, factual language that facilitates understanding of a selected phenomenon across disciplines of health science researchers. © The Author(s) 2016.

  6. 33 CFR 150.15 - What must the operations manual include?

    Science.gov (United States)

    2010-07-01

    ... containment; (iii) Connecting and disconnecting transfer equipment, including a floating hose string for a...) Connecting and disconnecting of transfer equipment, including to a floating hose string for a SPM; (iv) Line..., bolted flanges, and quick-disconnect coupling. (10) A description of the method used to water and de...

  7. 45 CFR 286.75 - What must be included in the Tribal Family Assistance Plan?

    Science.gov (United States)

    2010-10-01

    ... description of the employment opportunities available, in both the public and private sector, within and near... eligibility criteria the Tribe has established, which includes a definition of “needy family,” including income and resource limits and the Tribe's definition of “Tribal member family” or “Indian family.” (2) A...

  8. Graphic Description: The Mystery of Ibn Khafaja\\'s Success in Description

    Directory of Open Access Journals (Sweden)

    جواد رنجبر

    2009-12-01

    Full Text Available Graphic Description:   The Mystery of Ibn Khafaja's Success in Description    Ali Bagher Taheriniya *  Javad Ranjbar **      Abstract Ibn Khafaja is one of the poets and men of letters in Spain. He is titled to Sanobari of Spain. He is one of the masters of description. Hence, the analysis of successful techniques he has used in the descriptive art could illuminate the way for others. Al-Taswir al-harfi (graphic description is a term which denotes the highest and most detailed poems. On this basis, the best descriptive poem is one which is closer to a painting. He has used some elements called conforming elements of description which contain: imagination, feeling, faculty, and dialogue as well as three other elements: to be inborn in description, enchanting nature and convenient life. This article is going to give an analysis of the reasons for Ibn Khafaja’s success in description and portrait making.   Key words: Ibn Khafaja, poetry, description, portrait   * Associate Professor, Bu Ali Sina University of Hamadan E-mail: bTaheriniya@yahoo.com  ** M.A. in Arabic Language and Literature

  9. Shifting sands - from descriptions to solutions.

    Science.gov (United States)

    Armstrong, R; Pettman, T L; Waters, E

    2014-06-01

    Public health practitioners and policymakers value research evidence as one of many resources to use in evidence-informed decision making (EIDM) for public health. However, both researchers and decision-makers have described persistent barriers and facilitators involved in using research evidence for public health practice and policy. This is likely to affect the extent to which research evidence is influential or useful in decisions. Numerous taxonomies, typologies and frameworks are available to guide action in EIDM, but their application in practice is relatively unknown. The Public Health Evidence group based in Australia, which incorporates The Cochrane Collaboration's Public Health Review Group, have adapted a number of conceptualizations of research use and types of evidence into a practical typology that defines and illustrates three main types of evidence used in evidence-informed public health: data (Type 1), intervention effectiveness (Type 2) and implementation evidence (Type 3). The authors have actively used this typology within our primary research, evidence synthesis, workforce development and stakeholder engagement strategies, which has enabled practical application of these concepts. To test the relevance of the typology in practice, relevant findings from our applied research and evaluation (including two exploratory studies of evidence use in decision-making and evaluations of the use and impact of systematic reviews among end-users) were triangulated. The typology has been useful in stakeholder interactions when defining evidence, and identifying processes for EIDM. There was a preference for defining evidence as descriptive evidence (data) rather than impact evidence and implementation evidence. Practitioners were confident and competent at generating and using data and community views descriptively for priority setting (describing the problem). However, finding and using impact and implementation evidence appropriate for strategy development

  10. Prolonged grieving after abortion: a descriptive study.

    Science.gov (United States)

    Brown, D; Elkins, T E; Larson, D B

    1993-01-01

    Although flawed by methodological problems, the research literature tends to provide support for the assumption that induced abortion in the 1st trimester is not accompanied by enduring negative psychological sequelae. In cases where such sequelae are reported, the morbidity is attributed to a pre-existing psychiatric condition or circumstances precipitating the choice of abortion. However, detailed descriptive letters from 45 women prepared in response to a request by a pastor of an upper-middle-class Protestant congregation in Florida indicate that prolonged grieving after abortion may be more widespread phenomenon than previously believed. Letter writers ranged in age from 25-60 years; 75% were unmarried at the time of the procedure and 29% aborted before the legalization of abortion in the US. The most frequently cited long-term sequela, especially among those who felt coerced to abort, was a continued feeling of guilt. Fantasies about the aborted fetus was the next most frequently mentioned experience. Half of the letter writers referred to their abortions, as "murder" and 44% voiced regret about their decision to abort. Other long-term effects included depression (44%), feelings of loss (31%), shame (27%), and phobic responses to infants (13%). For 42% of these women, the adverse psychological effects of abortion endured over 10 years. Since letter-writers came from a self-selected population group with a known bias against abortion and only negative experiences were solicited, these experiences must be regarded as subjectives and anecdotal. However, they draw attention to the need for methodologically sound studies of a possible prolonged grief syndrome among a small percentage of women who have abortions, especially when coercion is involved.

  11. INJURIES IN QUIDDITCH: A DESCRIPTIVE EPIDEMIOLOGICAL STUDY.

    Science.gov (United States)

    Pennington, Rachel; Cooper, Ashley; Edmond, Evan; Faulkner, Alastair; Reidy, Michael J; Davies, Peter S E

    2017-10-01

    Quidditch is a fast growing, physically intense, mixed-gender full-contact sport. Originally adapted from Harry Potter novels, quidditch was first played in 2005 in the USA but is now played worldwide. It is essential to elucidate patterns of injury for the safety and growth of the sport of quidditch. It also provides a unique opportunity to study injury patterns in mixed-gender full-contact sport, an area of increasing importance with the developing culture of transition from single-gender to mixed-gender sports. The purpose of this investigation was to examine the types of injuries sustained while playing quidditch in terms of their incidence, anatomical distribution and severity, and gender distribution. An anonymous self-reporting questionnaire was distributed to all active quidditch players in the UK. Data collection included player demographics, type of injury, mechanism of injury, player position, experience and treatment required, relating to the previous 12 months. A total of 348 participants of 684 eligible athletes responded to the questionnaire representing a 50.87% response rate. There were 315 injuries reported by 180 athletes in total, with an overall incidence of 4.06 injuries per 1,000 hours. A statistically significantly different rate of concussion was observed with female athletes sustaining more concussion than males (p=0.006). The overall rate of concussion was 0.651/1000hrs in males and 1.163/1000hrs in females (0.877/1000 hours overall). This study provides the first quantitative description of injury rates in quidditch. The overall injury rates are no higher than those reported in other recreational contact sports. Female athletes were found to have a higher rate of concussion, which needs further investigation. These findings are relevant to players concerned about safety in quidditch and to governing bodies regarding governance of the sport. 3b.

  12. Shippingport Spent Fuel Canister System Description

    International Nuclear Information System (INIS)

    JOHNSON, D.M.

    2000-01-01

    In 1978 and 1979, a total of 72 blanket fuel assemblies (BFAs), irradiated during the operating cycles of the Shippingport Atomic Power Station's Pressurized Water Reactor (PWR) Core 2 from April 1965 to February 1974, were transferred to the Hanford Site and stored in underwater storage racks in Cell 2R at the 221-T Canyon (T-Plant). The initial objective was to recover the produced plutonium in the BFAs, but this never occurred and the fuel assemblies have remained within the water storage pool to the present time. The Shippingport Spent Fuel Canister (SSFC) is a confinement system that provides safe transport functions (in conjunction with the TN-WHC cask) and storage for the BFAs at the Canister Storage Building (CSB). The current plan is for these BFAs to be retrieved from wet storage and loaded into SSFCs for dry storage. The sealed SSFCs containing BFAs will be vacuum dried, internally backfilled with helium, and leak tested to provide suitable confinement for the BFAs during transport and storage. Following completion of the drying and inerting process, the SSFCs are to be delivered to the CSB for closure welding and long-term interim storage. The CSB will provide safe handling and dry storage for the SSFCs containing the BFAs. The purpose of this document is to describe the SSFC system and interface equipment, including the technical basis for the system, design descriptions, and operations requirements. It is intended that this document will be periodically updated as more equipment design and performance specification information becomes available

  13. Automated Linguistic Personality Description and Recognition Methods

    Directory of Open Access Journals (Sweden)

    Danylyuk Illya

    2016-12-01

    Full Text Available Background: The relevance of our research, above all, is theoretically motivated by the development of extraordinary scientific and practical interest in the possibilities of language processing of huge amount of data generated by people in everyday professional and personal life in the electronic forms of communication (e-mail, sms, voice, audio and video blogs, social networks, etc.. Purpose: The purpose of the article is to describe the theoretical and practical framework of the project "Communicative-pragmatic and discourse-grammatical lingvopersonology: structuring linguistic identity and computer modeling". The description of key techniques is given, such as machine learning for language modeling, speech synthesis, handwriting simulation. Results: Lingvopersonology developed some great theoretical foundations, its methods, tools, and significant achievements let us predict that the newest promising trend is a linguistic identity modeling by means of information technology, including language. We see three aspects of the modeling: 1 modeling the semantic level of linguistic identity – by means of the use of corpus linguistics; 2 sound level formal modeling of linguistic identity – with the help of speech synthesis; 3 formal graphic level modeling of linguistic identity – with the help of image synthesis (handwriting. For the first case, we suppose to use machine learning technics and vector-space (word2vec algorithm for textual speech modeling. Hybrid CUTE method for personality speech modeling will be applied to the second case. Finally, trained with the person handwriting images neural network can be an instrument for the last case. Discussion: The project "Communicative-pragmatic, discourse, and grammatical lingvopersonology: structuring linguistic identity and computer modeling", which is implementing by the Department of General and Applied Linguistics and Slavonic philology, selected a task to model Yuriy Shevelyov (Sherekh

  14. An Integrated Biochemistry Laboratory, Including Molecular Modeling

    Science.gov (United States)

    Hall, Adele J. Wolfson Mona L.; Branham, Thomas R.

    1996-11-01

    ) experience with methods of protein purification; (iii) incorporation of appropriate controls into experiments; (iv) use of basic statistics in data analysis; (v) writing papers and grant proposals in accepted scientific style; (vi) peer review; (vii) oral presentation of results and proposals; and (viii) introduction to molecular modeling. Figure 1 illustrates the modular nature of the lab curriculum. Elements from each of the exercises can be separated and treated as stand-alone exercises, or combined into short or long projects. We have been able to offer the opportunity to use sophisticated molecular modeling in the final module through funding from an NSF-ILI grant. However, many of the benefits of the research proposal can be achieved with other computer programs, or even by literature survey alone. Figure 1.Design of project-based biochemistry laboratory. Modules (projects, or portions of projects) are indicated as boxes. Each of these can be treated independently, or used as part of a larger project. Solid lines indicate some suggested paths from one module to the next. The skills and knowledge required for protein purification and design are developed in three units: (i) an introduction to critical assays needed to monitor degree of purification, including an evaluation of assay parameters; (ii) partial purification by ion-exchange techniques; and (iii) preparation of a grant proposal on protein design by mutagenesis. Brief descriptions of each of these units follow, with experimental details of each project at the end of this paper. Assays for Lysozyme Activity and Protein Concentration (4 weeks) The assays mastered during the first unit are a necessary tool for determining the purity of the enzyme during the second unit on purification by ion exchange. These assays allow an introduction to the concept of specific activity (units of enzyme activity per milligram of total protein) as a measure of purity. In this first sequence, students learn a turbidimetric assay

  15. Preliminary site description Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Skagius, Kristina [ed.

    2005-06-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterisation at two different locations, the Forsmark and Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. An integrated component in the characterisation work is the development of a site descriptive model that constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere as well as those ongoing natural processes that affect their long-term evolution. The present report documents the site descriptive modelling activities (version 1.2) for the Forsmark area. The overall objectives of the version 1.2 site descriptive modelling are to produce and document an integrated description of the site and its regional environments based on the site-specific data available from the initial site investigations and to give recommendations on continued investigations. The modelling work is based on primary data, i.e. quality-assured, geoscientific and ecological field data available in the SKB databases SICADA and GIS, available July 31, 2004. The work has been conducted by a project group and associated discipline-specific working groups. The members of the project group represent the disciplines of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and surface ecosystems (including overburden, surface hydrogeochemistry and hydrology). In addition, some group members have specific qualifications of importance in this type of project e.g. expertise in RVS (Rock Visualisation System) modelling, GIS-modelling and in statistical data analysis. The overall strategy to achieve a site description is to develop discipline-specific models by interpretation and analyses of the primary data. The different discipline-specific models are then integrated into a site description. Methodologies for developing the discipline-specific models are documented in

  16. Inadequate description of educational interventions in ongoing randomized controlled trials

    Directory of Open Access Journals (Sweden)

    Pino Cécile

    2012-05-01

    Full Text Available Abstract Background The registration of clinical trials has been promoted to prevent publication bias and increase research transparency. Despite general agreement about the minimum amount of information needed for trial registration, we lack clear guidance on descriptions of non-pharmacologic interventions in trial registries. We aimed to evaluate the quality of registry descriptions of non-pharmacologic interventions assessed in ongoing randomized controlled trials (RCTs of patient education. Methods On 6 May 2009, we searched for all ongoing RCTs registered in the 10 trial registries accessible through the World Health Organization International Clinical Trials Registry Platform. We included trials evaluating an educational intervention (that is, designed to teach or train patients about their own health and dedicated to participants, their family members or home caregivers. We used a standardized data extraction form to collect data related to the description of the experimental intervention, the centers, and the caregivers. Results We selected 268 of 642 potentially eligible studies and appraised a random sample of 150 records. All selected trials were registered in 4 registers, mainly ClinicalTrials.gov (61%. The median [interquartile range] target sample size was 205 [100 to 400] patients. The comparator was mainly usual care (47% or active treatment (47%. A minority of records (17%, 95% CI 11 to 23% reported an overall adequate description of the intervention (that is, description that reported the content, mode of delivery, number, frequency, duration of sessions and overall duration of the intervention. Further, for most reports (59%, important information about the content of the intervention was missing. The description of the mode of delivery of the intervention was reported for 52% of studies, the number of sessions for 74%, the frequency of sessions for 58%, the duration of each session for 45% and the overall duration for 63

  17. Preliminary site description Forsmark area - version 1.2

    International Nuclear Information System (INIS)

    Skagius, Kristina

    2005-06-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterisation at two different locations, the Forsmark and Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. An integrated component in the characterisation work is the development of a site descriptive model that constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere as well as those ongoing natural processes that affect their long-term evolution. The present report documents the site descriptive modelling activities (version 1.2) for the Forsmark area. The overall objectives of the version 1.2 site descriptive modelling are to produce and document an integrated description of the site and its regional environments based on the site-specific data available from the initial site investigations and to give recommendations on continued investigations. The modelling work is based on primary data, i.e. quality-assured, geoscientific and ecological field data available in the SKB databases SICADA and GIS, available July 31, 2004. The work has been conducted by a project group and associated discipline-specific working groups. The members of the project group represent the disciplines of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and surface ecosystems (including overburden, surface hydrogeochemistry and hydrology). In addition, some group members have specific qualifications of importance in this type of project e.g. expertise in RVS (Rock Visualisation System) modelling, GIS-modelling and in statistical data analysis. The overall strategy to achieve a site description is to develop discipline-specific models by interpretation and analyses of the primary data. The different discipline-specific models are then integrated into a site description. Methodologies for developing the discipline-specific models are documented in

  18. Qualitative and quantitative descriptions of glenohumeral motion.

    Science.gov (United States)

    Hill, A M; Bull, A M J; Wallace, A L; Johnson, G R

    2008-02-01

    Joint modelling plays an important role in qualitative and quantitative descriptions of both normal and abnormal joints, as well as predicting outcomes of alterations to joints in orthopaedic practice and research. Contemporary efforts in modelling have focussed upon the major articulations of the lower limb. Well-constrained arthrokinematics can form the basis of manageable kinetic and dynamic mathematical predictions. In order to contain computation of shoulder complex modelling, glenohumeral joint representations in both limited and complete shoulder girdle models have undergone a generic simplification. As such, glenohumeral joint models are often based upon kinematic descriptions of inadequate degrees of freedom (DOF) for clinical purposes and applications. Qualitative descriptions of glenohumeral motion range from the parody of a hinge joint to the complex realism of a spatial joint. In developing a model, a clear idea of intention is required in order to achieve a required application. Clinical applicability of a model requires both descriptive and predictive output potentials, and as such, a high level of validation is required. Without sufficient appreciation of the clinical intention of the arthrokinematic foundation to a model, error is all too easily introduced. Mathematical description of joint motion serves to quantify all relevant clinical parameters. Commonly, both the Euler angle and helical (screw) axis methods have been applied to the glenohumeral joint, although concordance between these methods and classical anatomical appreciation of joint motion is limited, resulting in miscommunication between clinician and engineer. Compounding these inconsistencies in motion quantification is gimbal lock and sequence dependency.

  19. Math Description Engine Software Development Kit

    Science.gov (United States)

    Shelton, Robert O.; Smith, Stephanie L.; Dexter, Dan E.; Hodgson, Terry R.

    2010-01-01

    The Math Description Engine Software Development Kit (MDE SDK) can be used by software developers to make computer-rendered graphs more accessible to blind and visually-impaired users. The MDE SDK generates alternative graph descriptions in two forms: textual descriptions and non-verbal sound renderings, or sonification. It also enables display of an animated trace of a graph sonification on a visual graph component, with color and line-thickness options for users having low vision or color-related impairments. A set of accessible graphical user interface widgets is provided for operation by end users and for control of accessible graph displays. Version 1.0 of the MDE SDK generates text descriptions for 2D graphs commonly seen in math and science curriculum (and practice). The mathematically rich text descriptions can also serve as a virtual math and science assistant for blind and sighted users, making graphs more accessible for everyone. The MDE SDK has a simple application programming interface (API) that makes it easy for programmers and Web-site developers to make graphs accessible with just a few lines of code. The source code is written in Java for cross-platform compatibility and to take advantage of Java s built-in support for building accessible software application interfaces. Compiled-library and NASA Open Source versions are available with API documentation and Programmer s Guide at http:/ / prim e.jsc.n asa. gov.

  20. An object model for beamline descriptions

    International Nuclear Information System (INIS)

    Hill, B.W.; Martono, H.; Gillespie, J.S.

    1997-01-01

    Translation of beamline model descriptions between different accelerator codes presents a unique challenge due to the different representations used for various elements and subsystems. These differences range from simple units conversions to more complex translations involving multiple beamline components. A representation of basic accelerator components is being developed in order to define a meta-structure from which beamline models, in different codes, can be described and to facilitate the translation of models between these codes. Sublines of basic components will be used to represent more complex beamline descriptions and bridge the gap between codes which may represent a beamline element as a single entity, and those which use multiple elements to describe the same physical device. A C++ object model for supporting this beamline description and a grammar for describing beamlines in terms of these components is being developed. The object model will support a common graphic user interface and translation filters for representing native beamline descriptions for a variety of accelerator codes. An overview of our work on the object model for beamline descriptions is presented here. copyright 1997 American Institute of Physics

  1. Births and deaths including fetal deaths

    Data.gov (United States)

    U.S. Department of Health & Human Services — Access to a variety of United States birth and death files including fetal deaths: Birth Files, 1968-2009; 1995-2005; Fetal death file, 1982-2005; Mortality files,...

  2. Including Indigenous Minorities in Decision-Making

    DEFF Research Database (Denmark)

    Pristed Nielsen, Helene

    Based on theories of public sphere participation and deliberative democracy, this book presents empirical results from a study of experiences with including Aboriginal and Maori groups in political decision-making in respectively Western Australia and New Zealand......Based on theories of public sphere participation and deliberative democracy, this book presents empirical results from a study of experiences with including Aboriginal and Maori groups in political decision-making in respectively Western Australia and New Zealand...

  3. Gas storage materials, including hydrogen storage materials

    Science.gov (United States)

    Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

    2013-02-19

    A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

  4. Pain perception description after advanced surface ablation

    Directory of Open Access Journals (Sweden)

    Sobas EM

    2017-04-01

    Full Text Available Eva M Sobas,1,2 Sebastián Videla,3,4 Amanda Vázquez,1 Itziar Fernández,1,5 Miguel J Maldonado,1 José-Carlos Pastor1,6,7 1Instituto Universitario de Oftalmobiología Aplicada (IOBA, Universidad de Valladolid, Valladolid, Spain; 2Facultad de Enfermería, Universidad de Valladolid, Valladolid Spain; 3Laboratorios Dr. Esteve S.A., Barcelona, Spain; 4Department of Experimental and Health Sciences, Facultad de Ciencias de la Salud y de la Vida, Universidad Pompeu Fabra, Barcelona, Spain; 5Networking Research Center on Bioengineering, Biomaterials and Nanomedicine (CIBER-BBN, Valladolid, Spain; 6Department of Ophthalmology, Hospital Clínico Universitario, Valladolid, Spain; 7Department of Surgery, Ophthalmology, Otorhinolaryngology and Physiotherapy, Facultad de Medicina, Universidad de Valladolid, Valladolid, Spain Purpose: The objective of this study was to characterize the evolution of ocular pain after advanced surface ablation (ASA to improve strategies in postoperative pain management.Methods: This was a multicenter, prospective, descriptive, cohort study. The inclusion criteria were healthy individuals ≥18 years old receiving bilateral alcohol-assisted surface ablation with epithelial removal. Pain intensity was evaluated with the visual analog scale (VAS and the numeric pain rating scale before and after surgery. Comorbidities (photophobia, burning, tearing, and foreign body sensation and Hospital Anxiety and Depression (HAD questionnaire were evaluated before and at 6 hours after surgery. Postoperative treatments included cold patch, topical cold antibiotics, topical steroids, and benzodiazepines.Results: Thirty-two consecutive patients having similar profiles of postoperative pain evolution were included. At 0.5 hour after ASA, the pain score by VAS was 37±20 mm, and the maximum pain, 61±31 mm, occurred at 24 hours. Afterward, it decreased progressively until 72 hours after surgery (19±20 mm. Most patients (81% scored >60 mm, and

  5. Descriptive and analytic epidemiology. Bridges to cancer control

    International Nuclear Information System (INIS)

    Mettlin, C.

    1988-01-01

    Epidemiology serves as a bridge between basic science and cancer control. The two major orientations of epidemiology are descriptive and analytic. The former is useful in assessing the scope and dimensions of the cancer problem and the latter is used to assess environmental and lifestyle sources of cancer risk. A recent development in descriptive epidemiology is the use of functional measures of disease such as lost life expectancy. In analytical epidemiology, there is new or renewed interest in several lifestyle factors including diet and exercise as well as environmental factors such as involuntary tobacco exposure and radon in dwellings. Review of the evidence should consider the strengths and weaknesses of different research procedures. Each method is inconclusive by itself but, the different research designs of epidemiology collectively may represent a hierarchy of proof. Although the roles of many factors remain to be defined, the aggregate epidemiologic data continue to demonstrate the special importance of personal behavior and lifestyle in affecting cancer risk

  6. Telidon Videotex presentation level protocol: Augmented picture description instructions

    Science.gov (United States)

    Obrien, C. D.; Brown, H. G.; Smirle, J. C.; Lum, Y. F.; Kukulka, J. Z.; Kwan, A.

    1982-02-01

    The Telidon Videotex system is a method by which graphic and textual information and transactional services can be accessed from information sources by the general public. In order to transmit information to a Telidon terminal at a minimum bandwidth, and in a manner independent of the type of communications channel, a coding scheme was devised which permits the encoding of a picture into the geometric drawing elements which compose it. These picture description instructions are an alpha geometric coding model and are based on the primitives of POINT, LINE, ARC, RECTANGLE, POLYGON, and INCREMENT. Text is encoded as (ASCII) characters along with a supplementary table of accents and special characters. A mosaic shape table is included for compatibility. A detailed specification of the coding scheme and a description of the principles which make it independent of communications channel and display hardware are provided.

  7. Microscopical description of isovector collective Osup(+) states in atomic nuclei

    International Nuclear Information System (INIS)

    Chekanov, N.A.

    1983-01-01

    A microscopical consistent description of isobar-analogue states and isovector monopole giant resonances is given in framework of the random-phase theory. The necessary one-particle basis, including the continuous spectrum, is determined by solution of the Hartree-Fock equations with the effective Skyrme-type interaction. An important feature of such a description is an automatical fulfilment of the consistency conditions relating the shell potential, nuclear density and the residual interaction. Effects due to Coulomb interaction in nuclei are investigated, such as the Coulomb shift energies, isospin admixtures to the ground state of the parent nucleus. Transition densities for the analogue states are obtained. Numerical calculations have been performed in the coordinate space for a number of neutron-rich nuclei

  8. Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR): Summary description

    International Nuclear Information System (INIS)

    Gertman, D.I.; Gilmore, W.E.; Galyean, W.J.; Groh, M.R.; Gentillon, C.D.; Gilbert, B.G.; Reece, W.J.

    1990-05-01

    The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automate data base management system for storing and processing human error probability and hardware component failure rate data. The NUCLARR system software resides on an IBM (or compatible) personal microcomputer. NUCLARR can be accessed by the end user to furnish data suitable for input in human and/or hardware reliability analysis to support a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. This document Volume 1, of this series is the Summary Description, which presents an overview of the data management system, including a description of data collection, data qualification, data structure, and taxonomies. Programming activities, procedures for processing data, a user's guide, and hard copy data manual are presented in Volumes 2 through 5, NUREG/CR-4639

  9. SURFACE INDUSTRIAL HVAC SYSTEM DESCRIPTION DOCUMENT

    Energy Technology Data Exchange (ETDEWEB)

    M.M. Ansari

    2005-04-05

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the surface industrial heating, ventilation, and air-conditioning (HVAC) system and its bases to allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control; accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential to performing the design process. The SDD follows the design with regard to the description of the system. The description that provided in this SDD reflects the current results of the design process.

  10. Refined reservoir description to maximize oil recovery

    International Nuclear Information System (INIS)

    Flewitt, W.E.

    1975-01-01

    To assure maximized oil recovery from older pools, reservoir description has been advanced by fully integrating original open-hole logs and the recently introduced interpretive techniques made available through cased-hole wireline saturation logs. A refined reservoir description utilizing normalized original wireline porosity logs has been completed in the Judy Creek Beaverhill Lake ''A'' Pool, a reefal carbonate pool with current potential productivity of 100,000 BOPD and 188 active wells. Continuous porosity was documented within a reef rim and cap while discontinuous porous lenses characterized an interior lagoon. With the use of pulsed neutron logs and production data a separate water front and pressure response was recognized within discrete environmental units. The refined reservoir description aided in reservoir simulation model studies and quantifying pool performance. A pattern water flood has now replaced the original peripheral bottom water drive to maximize oil recovery

  11. Effective fluid description of the dark universe

    Directory of Open Access Journals (Sweden)

    M. Cadoni

    2018-01-01

    Full Text Available We propose an effective anisotropic fluid description for a generic infrared-modified theory of gravity. In our framework, the additional component of the acceleration, commonly attributed to dark matter, is explained as a radial pressure generated by the reaction of the dark energy fluid to the presence of baryonic matter. Using quite general assumptions, and a microscopic description of the fluid in terms of a Bose–Einstein condensate of gravitons, we find the static, spherically symmetric solution for the metric in terms of the Misner–Sharp mass function and the fluid pressure. At galactic scales, we correctly reproduce the leading MOND-like log⁡(r and subleading (1/rlog⁡(r terms in the weak-field expansion of the potential. Our description also predicts a tiny (of order 10−6 for a typical spiral galaxy Machian modification of the Newtonian potential at galactic scales, which is controlled by the cosmological acceleration.

  12. Description of textures by a structural analysis.

    Science.gov (United States)

    Tomita, F; Shirai, Y; Tsuji, S

    1982-02-01

    A structural analysis system for describing natural textures is introduced. The analyzer automatically extracts the texture elements in an input image, measures their properties, classifies them into some distinctive classes (one ``ground'' class and some ``figure'' classes), and computes the distributions of the gray level, the shape, and the placement of the texture elements in each class. These descriptions are used for classification of texture images. An analysis-by-synthesis method for evaluating texture analyzers is also presented. We propose a synthesizer which generates a texture image based on the descriptions. By comparing the reconstructed image with the original one, we can see what information is preserved and what is lost in the descriptions.

  13. CORECOOL, model description of the programme

    International Nuclear Information System (INIS)

    Andersen, J.G.M.; Abel-Larsen, H.

    1978-11-01

    CORECOOL, Convection and Radiation Emergency Cooling, is a model for the two-phase flow and heat transfer in a fuel element during the core heat-up phase following a loss of coolant accident. The model for the two-phase flow is based on a solution of the conservation equations with a separate description of the two phases and thermodynamic non-equilibrium. The flow-regimes considered are drop flow and film flow. The heat transfer consists of convection, sputtering and radiation heat transfer. The documentation of CORECOOL consists of four parts: I) model description, II) programme description (COMMERCIAL), III) users guide (COMMERCIAL) IV) verification (COMMERCIAL). CORECOOL is a joint project between Risoe National Laboratory Denmark and General Electric Company, San Jose, USA. (author)

  14. Towards reproducible descriptions of neuronal network models.

    Directory of Open Access Journals (Sweden)

    Eilen Nordlie

    2009-08-01

    Full Text Available Progress in science depends on the effective exchange of ideas among scientists. New ideas can be assessed and criticized in a meaningful manner only if they are formulated precisely. This applies to simulation studies as well as to experiments and theories. But after more than 50 years of neuronal network simulations, we still lack a clear and common understanding of the role of computational models in neuroscience as well as established practices for describing network models in publications. This hinders the critical evaluation of network models as well as their re-use. We analyze here 14 research papers proposing neuronal network models of different complexity and find widely varying approaches to model descriptions, with regard to both the means of description and the ordering and placement of material. We further observe great variation in the graphical representation of networks and the notation used in equations. Based on our observations, we propose a good model description practice, composed of guidelines for the organization of publications, a checklist for model descriptions, templates for tables presenting model structure, and guidelines for diagrams of networks. The main purpose of this good practice is to trigger a debate about the communication of neuronal network models in a manner comprehensible to humans, as opposed to machine-readable model description languages. We believe that the good model description practice proposed here, together with a number of other recent initiatives on data-, model-, and software-sharing, may lead to a deeper and more fruitful exchange of ideas among computational neuroscientists in years to come. We further hope that work on standardized ways of describing--and thinking about--complex neuronal networks will lead the scientific community to a clearer understanding of high-level concepts in network dynamics, and will thus lead to deeper insights into the function of the brain.

  15. Manifest domains:analysis and description

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2017-01-01

    _static_attribute, is_dynamic_attribute, is_inert_attribute, is_reactive_attribute, is_active_attribute, is_autonomous_attribute, is_biddable_attribute and is_programmable_attribute. The twist suggests ways of modeling “access” to the values of these kinds of attributes: the static attributes by simply “copying” them...... processes. C.A.R. Hoare series in computer science. Prentice-Hall International, London, 2004). We show how to model essential aspects of perdurants in terms of their signatures based on the concepts of endurants. And we show how one can “compile” descriptions of endurant parts into descriptions...

  16. The first accurate description of an aurora

    Science.gov (United States)

    Schröder, Wilfried

    2006-12-01

    As technology has advanced, the scientific study of auroral phenomena has increased by leaps and bounds. A look back at the earliest descriptions of aurorae offers an interesting look into how medieval scholars viewed the subjects that we study.Although there are earlier fragmentary references in the literature, the first accurate description of the aurora borealis appears to be that published by the German Catholic scholar Konrad von Megenberg (1309-1374) in his book Das Buch der Natur (The Book of Nature). The book was written between 1349 and 1350.

  17. Microscopic description of magnetized plasma: quasiparticle concept

    International Nuclear Information System (INIS)

    Sosenko, P.P.; Decyk, V.K.

    1993-01-01

    A quasiparticle concept is developed systematically, from first principles, within the context of microscopic description of magnetized plasma. It is argued that the zeroth velocity-gyroangle harmonic of the microscopic particle distribution function under the gyrokinetic change of variables can be taken as a microscopic quasi-particle density in a reduced phase space. The nature of quasiparticles is discussed and equations of their motion are derived within both exact and reduced microscopic descriptions. The reduced one employs explicitly the separation of interesting time scales. (orig.)

  18. Electric Power Monthly, August 1990. [Glossary included

    Energy Technology Data Exchange (ETDEWEB)

    1990-11-29

    The Electric Power Monthly (EPM) presents monthly summaries of electric utility statistics at the national, Census division, and State level. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. Data includes generation by energy source (coal, oil, gas, hydroelectric, and nuclear); generation by region; consumption of fossil fuels for power generation; sales of electric power, cost data; and unusual occurrences. A glossary is included.

  19. Electrochemical cell structure including an ionomeric barrier

    Science.gov (United States)

    Lambert, Timothy N.; Hibbs, Michael

    2017-06-20

    An apparatus includes an electrochemical half-cell comprising: an electrolyte, an anode; and an ionomeric barrier positioned between the electrolyte and the anode. The anode may comprise a multi-electron vanadium phosphorous alloy, such as VP.sub.x, wherein x is 1-5. The electrochemical half-cell is configured to oxidize the vanadium and phosphorous alloy to release electrons. A method of mitigating corrosion in an electrochemical cell includes disposing an ionomeric barrier in a path of electrolyte or ion flow to an anode and mitigating anion accumulation on the surface of the anode.

  20. Isolators Including Main Spring Linear Guide Systems

    Science.gov (United States)

    Goold, Ryan (Inventor); Buchele, Paul (Inventor); Hindle, Timothy (Inventor); Ruebsamen, Dale Thomas (Inventor)

    2017-01-01

    Embodiments of isolators, such as three parameter isolators, including a main spring linear guide system are provided. In one embodiment, the isolator includes first and second opposing end portions, a main spring mechanically coupled between the first and second end portions, and a linear guide system extending from the first end portion, across the main spring, and toward the second end portion. The linear guide system expands and contracts in conjunction with deflection of the main spring along the working axis, while restricting displacement and rotation of the main spring along first and second axes orthogonal to the working axis.

  1. Low-Complexity Multiple Description Coding of Video Based on 3D Block Transforms

    Directory of Open Access Journals (Sweden)

    Andrey Norkin

    2007-02-01

    Full Text Available The paper presents a multiple description (MD video coder based on three-dimensional (3D transforms. Two balanced descriptions are created from a video sequence. In the encoder, video sequence is represented in a form of coarse sequence approximation (shaper included in both descriptions and residual sequence (details which is split between two descriptions. The shaper is obtained by block-wise pruned 3D-DCT. The residual sequence is coded by 3D-DCT or hybrid, LOT+DCT, 3D-transform. The coding scheme is targeted to mobile devices. It has low computational complexity and improved robustness of transmission over unreliable networks. The coder is able to work at very low redundancies. The coding scheme is simple, yet it outperforms some MD coders based on motion-compensated prediction, especially in the low-redundancy region. The margin is up to 3 dB for reconstruction from one description.

  2. 28 CFR 20.32 - Includable offenses.

    Science.gov (United States)

    2010-07-01

    ... Exchange of Criminal History Record Information § 20.32 Includable offenses. (a) Criminal history record... vehicular manslaughter, driving under the influence of drugs or liquor, and hit and run), when unaccompanied by a § 20.32(a) offense. These exclusions may not be applicable to criminal history records...

  3. Including Students with Visual Impairments: Softball

    Science.gov (United States)

    Brian, Ali; Haegele, Justin A.

    2014-01-01

    Research has shown that while students with visual impairments are likely to be included in general physical education programs, they may not be as active as their typically developing peers. This article provides ideas for equipment modifications and game-like progressions for one popular physical education unit, softball. The purpose of these…

  4. Extending flood damage assessment methodology to include ...

    African Journals Online (AJOL)

    Optimal and sustainable flood plain management, including flood control, can only be achieved when the impacts of flood control measures are considered for both the man-made and natural environments, and the sociological aspects are fully considered. Until now, methods/models developed to determine the influences ...

  5. BIOLOGIC AND ECONOMIC EFFECTS OF INCLUDING DIFFERENT ...

    African Journals Online (AJOL)

    The biologic and economic effects of including three agro-industrial by-products as ingredients in turkey poult diets were investigated using 48 turkey poults in a completely randomised design experiment. Diets were formulated to contain the three by-products – wheat offal, rice husk and palm kernel meal, each at 20% level ...

  6. Including Children Dependent on Ventilators in School.

    Science.gov (United States)

    Levine, Jack M.

    1996-01-01

    Guidelines for including ventilator-dependent children in school are offered, based on experience with six such students at a New York State school. Guidelines stress adherence to the medical management plan, the school-family partnership, roles of the social worker and psychologist, orientation, transportation, classroom issues, and steps toward…

  7. Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias [ed.

    2005-03-01

    Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions.

  8. Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2005-03-01

    Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions

  9. Word Processing Job Descriptions and Duties.

    Science.gov (United States)

    Gajewski-Johnson, Marlyce

    In order to develop a word processing career file at Milwaukee Area Technical College, employment managers at 124 Milwaukee-area businesses were asked to provide job descriptions for all word processing positions in the company; skill and knowledge requirements necessary to obtain these positions; employee appraisal forms; wage scales; a list of…

  10. Effective lagrangian description on discrete gauge symmetries

    International Nuclear Information System (INIS)

    Banks, T.

    1989-01-01

    We exhibit a simple low-energy lagrangian which describes a system with a discrete remnant of a spontaneously broken continuous gauge symmetry. The lagrangian gives a simple description of the effects ascribed to such systems by Krauss and Wilczek: black holes carry discrete hair and interact with cosmic strings, and wormholes cannot lead to violation of discrete gauge symmetries. (orig.)

  11. Computer hardware description languages - A tutorial

    Science.gov (United States)

    Shiva, S. G.

    1979-01-01

    The paper introduces hardware description languages (HDL) as useful tools for hardware design and documentation. The capabilities and limitations of HDLs are discussed along with the guidelines needed in selecting an appropriate HDL. The directions for future work are provided and attention is given to the implementation of HDLs in microcomputers.

  12. Descriptive Developmental Research: Why Only Time?

    Science.gov (United States)

    Labouvie, Erich W.

    1975-01-01

    The usefulness of the concepts of cohort and time of measurement in descriptive developmental research was examined by comparing the time-specific cross-sectional and cohort-specific longitudinal age gradients of stable and unstable children. (Author/ED)

  13. Descriptive data of JENDL-3.2

    Energy Technology Data Exchange (ETDEWEB)

    Shibata, Keiichi; Narita, Tsutomu [eds.; Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-02-01

    The second revision of JENDL-3 (JENDL-3.2) was released in 1994. The library contains evaluated neutron nuclear data for 340 nuclides which are needed for the design of fission and fusion reactors and for shielding calculation. This report presents a brief description of the evaluation method which is given in the File-1 part of JENDL-3.2. (author)

  14. Descriptive data of JENDL-3.3

    Energy Technology Data Exchange (ETDEWEB)

    Shibata, Keiichi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2003-01-01

    The third revision of JENDL-3 (JENDL-3.3) was released in 2002. The library contains evaluated neutron nuclear data for 337 nuclides. This report presents a brief description of the evaluation method which is given in the MF1 part of JENDL-3.3. (author)

  15. Advisory processes and their descriptive data

    Directory of Open Access Journals (Sweden)

    Milan Mišovič

    2005-01-01

    Full Text Available Processes are regarded as a representative of all firm activities what is valid for Web-based Advisory Systems, too. Interpretation of processes from the both sides managers and informaticians is naturally different what is given by their scientific platforms and observed objectives. Managers have connected all firm processes with the firm prosperity and firm competition ability. Therefore they have followed understanding, modeling and regular improving of all processes what should stimulate and evoke using of process revisions (reengineering. The main role in such process understanding is thus committed to the firm management.The most professional computer process implementations are dominant objectives of Informaticians. In this conception all processes have been understood as real sequences of partial transactions (elementary firm activities and data processed by them regardless of using of a structural or object process approach modeling. The process and transaction models, submitted by informaticians, are connected with process content orientation. This content has to be programmed. The firm management represents the main resource of the process knowledge used by informaticians.In addition to these two process conceptions there is a different approach based on a process description by a descriptive data. The descriptive data are not oriented to a process content but to its theoretical conception and real implementation. The descriptive data processing inside special algebra operations can bring a lot of very important and easily economically interpreted results.

  16. Applicability of the Organisational Climate Description Questionnaire

    African Journals Online (AJOL)

    ... Climate Description. Questionnaire – Rutgers Elementary: a South African case study ... educators of their work are determinants for the organizational climate of school. ... The article concludes with a number of recommendations on the use of the ... Region, one an Afrikaans- and the other an English-medium school.

  17. Some Dictionary Descriptions of Grammatical Structure | Branford ...

    African Journals Online (AJOL)

    This paper examines some points in the treatment of grammatical structure in four recent dictionaries of English as Ll. These are viewed against the background concepts of "Iexicogrammar" (Halliday 1978) and of the interdependence of lexicographical and syntactic descriptions of language. Its scope is necessari1y ...

  18. Minimum Description Length Shape and Appearance Models

    DEFF Research Database (Denmark)

    Thodberg, Hans Henrik

    2003-01-01

    The Minimum Description Length (MDL) approach to shape modelling is reviewed. It solves the point correspondence problem of selecting points on shapes defined as curves so that the points correspond across a data set. An efficient numerical implementation is presented and made available as open s...

  19. Improved motion description for action classification

    NARCIS (Netherlands)

    Jain, M.; Jégou, H.; Bouthemy, P.

    2016-01-01

    Even though the importance of explicitly integrating motion characteristics in video descriptions has been demonstrated by several recent papers on action classification, our current work concludes that adequately decomposing visual motion into dominant and residual motions, i.e., camera and scene

  20. Description of the Wetlands Research Programme

    CSIR Research Space (South Africa)

    Walmsley, RD

    1988-01-01

    Full Text Available This report presents a rationale to the development of a multidisciplinary South African Wetland Research Programme. A definition of what is meant by the term wetland is given along with a general description of what types of wetland occur in South...

  1. MPEG DASH SRD : Spatial Relationship Description

    NARCIS (Netherlands)

    Niamut, O.A.; Thomas, E.D.R.; D'Acunto, L.; Concolato, C.; Denoual, F.; Yong Lim, S.

    2016-01-01

    This paper presents the Spatial Representation Description (SRD)feature of the second amendment of MPEG DASH standard part 1, 23009-1:2014 [1]. SRD is an approach for streaming only spatial sub-parts of a video to display devices, in combination with the form of adaptive multi-rate streaming that is

  2. 49 CFR 587.13 - General description.

    Science.gov (United States)

    2010-10-01

    ... Transportation Other Regulations Relating to Transportation (Continued) NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DEFORMABLE BARRIERS Offset Deformable Barrier § 587.13 General description. The offset deformable barrier is comprised of two elements: a fixed rigid barrier and...

  3. Journal bearing impedance descriptions for rotordynamic applications

    NARCIS (Netherlands)

    Childs, D.W.; Moes, H.; Leeuwen, van H.J.

    1977-01-01

    Bearing impedance vectors are introduced for plain journal bearings which define the bearing reaction force components as a function of the bearing motion. Impedance descriptions are developed directly for the approximate Ocvirk (short) and Sommerfeld (long) bearing solutions. The impedance vector

  4. 30 CFR 1.2 - Description.

    Science.gov (United States)

    2010-07-01

    ... MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR OFFICIAL EMBLEM AND OMB CONTROL NUMBERS FOR RECORDKEEPING AND REPORTING MINE SAFETY AND HEALTH ADMINISTRATION; ESTABLISHMENT AND USE OF OFFICIAL EMBLEM § 1.2 Description. The emblem of the Mine Safety and Health Administration is of contemporary design...

  5. Descriptions of positron defect analysis capabilities

    International Nuclear Information System (INIS)

    Howell, R.H.

    1994-10-01

    A series of descriptive papers and graphics appropriate for distribution to potential collaborators has been assembled. These describe the capabilities for defect analysis using positron annihilation spectroscopy. The application of positrons to problems in the polymer and semiconductor industries is addressed

  6. Photoactive devices including porphyrinoids with coordinating additives

    Science.gov (United States)

    Forrest, Stephen R; Zimmerman, Jeramy; Yu, Eric K; Thompson, Mark E; Trinh, Cong; Whited, Matthew; Diev, Vlacheslav

    2015-05-12

    Coordinating additives are included in porphyrinoid-based materials to promote intermolecular organization and improve one or more photoelectric characteristics of the materials. The coordinating additives are selected from fullerene compounds and organic compounds having free electron pairs. Combinations of different coordinating additives can be used to tailor the characteristic properties of such porphyrinoid-based materials, including porphyrin oligomers. Bidentate ligands are one type of coordinating additive that can form coordination bonds with a central metal ion of two different porphyrinoid compounds to promote porphyrinoid alignment and/or pi-stacking. The coordinating additives can shift the absorption spectrum of a photoactive material toward higher wavelengths, increase the external quantum efficiency of the material, or both.

  7. Electric power monthly, September 1990. [Glossary included

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-17

    The purpose of this report is to provide energy decision makers with accurate and timely information that may be used in forming various perspectives on electric issues. The power plants considered include coal, petroleum, natural gas, hydroelectric, and nuclear power plants. Data are presented for power generation, fuel consumption, fuel receipts and cost, sales of electricity, and unusual occurrences at power plants. Data are compared at the national, Census division, and state levels. 4 figs., 52 tabs. (CK)

  8. Nuclear reactor shield including magnesium oxide

    International Nuclear Information System (INIS)

    Rouse, C.A.; Simnad, M.T.

    1981-01-01

    An improvement is described for nuclear reactor shielding of a type used in reactor applications involving significant amounts of fast neutron flux. The reactor shielding includes means providing structural support, neutron moderator material, neutron absorber material and other components, wherein at least a portion of the neutron moderator material is magnesium in the form of magnesium oxide either alone or in combination with other moderator materials such as graphite and iron

  9. Jet-calculus approach including coherence effects

    International Nuclear Information System (INIS)

    Jones, L.M.; Migneron, R.; Narayanan, K.S.S.

    1987-01-01

    We show how integrodifferential equations typical of jet calculus can be combined with an averaging procedure to obtain jet-calculus-based results including the Mueller interference graphs. Results in longitudinal-momentum fraction x for physical quantities are higher at intermediate x and lower at large x than with the conventional ''incoherent'' jet calculus. These results resemble those of Marchesini and Webber, who used a Monte Carlo approach based on the same dynamics

  10. Rock Visualization System. Technical description (RVS version 3.8)

    International Nuclear Information System (INIS)

    Curtis, P.; Elfstroem, M.; Markstroem, I.

    2007-06-01

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 4.0. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carry out a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system

  11. Rock Visualization System. Technical description (RVS version 3.8)

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, P.; Elfstroem, M.; Markstroem, I. [FB Engineering, Goeteborg (Sweden)

    2005-04-01

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 3.8. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

  12. Effective International Medical Disaster Relief: A Qualitative Descriptive Study.

    Science.gov (United States)

    Broby, Nicolette; Lassetter, Jane H; Williams, Mary; Winters, Blaine A

    2018-04-01

    Purpose The aim of this study was to assist organizations seeking to develop or improve their medical disaster relief effort by identifying fundamental elements and processes that permeate high-quality, international, medical disaster relief organizations and the teams they deploy. A qualitative descriptive design was used. Data were gathered from interviews with key personnel at five international medical response organizations, as well as during field observations conducted at multiple sites in Jordan and Greece, including three refugee camps. Data were then reviewed by the research team and coded to identify patterns, categories, and themes. The results from this qualitative, descriptive design identified three themes which were key characteristics of success found in effective, well-established, international medical disaster relief organizations. These characteristics were first, ensuring an official invitation had been extended and the need for assistance had been identified. Second, the response to that need was done in an effective and sustainable manner. Third, effective organizations strived to obtain high-quality volunteers. By following the three key characteristics outlined in this research, organizations are more likely to improve the efficiency and quality of their work. In addition, they will be less likely to impede the overall recovery process. Broby N , Lassetter JH , Williams M , Winters BA . Effective international medical disaster relief: a qualitative descriptive study. Prehosp Disaster Med. 2018;33(2):119-126.

  13. Analysis of laparoscopic port site complications: A descriptive study.

    Science.gov (United States)

    Karthik, Somu; Augustine, Alfred Joseph; Shibumon, Mundunadackal Madhavan; Pai, Manohar Varadaraya

    2013-04-01

    The rate of port site complications following conventional laparoscopic surgery is about 21 per 100,000 cases. It has shown a proportional rise with increase in the size of the port site incision and trocar. Although rare, complications that occur at the port site include infection, bleeding, and port site hernia. To determine the morbidity associated with ports at the site of their insertion in laparoscopic surgery and to identify risk factors for complications. Prospective descriptive study. In the present descriptive study, a total of 570 patients who underwent laparoscopic surgeries for various ailments between August 2009 and July 2011 at our institute were observed for port site complications prospectively and the complications were reviewed. Descriptive statistical analysis was carried out in the present study. The statistical software, namely, SPSS 15.0 was used for the analysis of the data. Of the 570 patients undergoing laparoscopic surgery, 17 (3%) had developed complications specifically related to the port site during a minimum follow-up of three months; port site infection (PSI) was the most frequent (n = 10, 1.8%), followed by port site bleeding (n = 4, 0.7%), omentum-related complications (n = 2; 0.35%), and port site metastasis (n = 1, 0.175%). Laparoscopic surgeries are associated with minimal port site complications. Complications are related to the increased number of ports. Umbilical port involvement is the commonest. Most complications are manageable with minimal morbidity, and can be further minimized with meticulous surgical technique during entry and exit.

  14. Rock Visualization System. Technical description (RVS version 3.8)

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, P.; Elfstroem, M.; Markstroem, I. [Golder Associates AB (Sweden)

    2007-06-15

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 4.0. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carry out a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

  15. Rock Visualization System. Technical description (RVS version 3.8)

    International Nuclear Information System (INIS)

    Curtis, P.; Elfstroem, M.; Markstroem, I.

    2005-04-01

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 3.8. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system

  16. Pairwise Trajectory Management (PTM): Concept Description and Documentation

    Science.gov (United States)

    Jones, Kenneth M.; Graff, Thomas J.; Carreno, Victor; Chartrand, Ryan C.; Kibler, Jennifer L.

    2018-01-01

    Pairwise Trajectory Management (PTM) is an Interval Management (IM) concept that utilizes airborne and ground-based capabilities to enable the implementation of airborne pairwise spacing capabilities in oceanic regions. The goal of PTM is to use airborne surveillance and tools to manage an "at or greater than" inter-aircraft spacing. Due to the accuracy of Automatic Dependent Surveillance-Broadcast (ADS-B) information and the use of airborne spacing guidance, the minimum PTM spacing distance will be less than distances a controller can support with current automation systems that support oceanic operations. Ground tools assist the controller in evaluating the traffic picture and determining appropriate PTM clearances to be issued. Avionics systems provide guidance information that allows the flight crew to conform to the PTM clearance issued by the controller. The combination of a reduced minimum distance and airborne spacing management will increase the capacity and efficiency of aircraft operations at a given altitude or volume of airspace. This document provides an overview of the proposed application, a description of several key scenarios, a high level discussion of expected air and ground equipment and procedure changes, a description of a NASA human-machine interface (HMI) prototype for the flight crew that would support PTM operations, and initial benefits analysis results. Additionally, included as appendices, are the following documents: the PTM Operational Services and Environment Definition (OSED) document and a companion "Future Considerations for the Pairwise Trajectory Management (PTM) Concept: Potential Future Updates for the PTM OSED" paper, a detailed description of the PTM algorithm and PTM Limit Mach rules, initial PTM safety requirements and safety assessment documents, a detailed description of the design, development, and initial evaluations of the proposed flight crew HMI, an overview of the methodology and results of PTM pilot training

  17. 33 CFR 148.105 - What must I include in my application?

    Science.gov (United States)

    2010-07-01

    ... certificate of formation; the partnership agreement or articles of association; the current by-laws; the... quarter that ends at least 30 days before submission of the application, unless it is included in the most..., for night detection. (r) Information on dedicated fixed offshore components. (1) A description and...

  18. 40 CFR 725.155 - Information to be included in the MCAN.

    Science.gov (United States)

    2010-07-01

    ... evaluation of the health and environmental effects of the microorganism, or any microbial mixture or article... genetic material, including any regulatory sequences and structural genes and the products of those genes... introduction; and a description of the regulatory and structural genes that are components of the introduced...

  19. 40 CFR 720.45 - Information that must be included in the notice form.

    Science.gov (United States)

    2010-07-01

    ... manufactured, processed, or used. (2) A process description of each manufacture, processing, and use operation which includes a diagram of the major unit operations and chemical conversions, the identity and entry... composition that can be represented by a specific, complete chemical structure diagram (a Class 1 substance...

  20. [Renal patient's diet: Can fish be included?].

    Science.gov (United States)

    Castro González, M I; Maafs Rodríguez, A G; Galindo Gómez, C

    2012-01-01

    Medical and nutritional treatment for renal disease, now a major public health issue, is highly complicated. Nutritional therapy must seek to retard renal dysfunction, maintain an optimal nutritional status and prevent the development of underlying pathologies. To analyze ten fish species to identify those that, because of their low phosphorus content, high biological value protein and elevated n-3 fatty acids EPA and DHA, could be included in renal patient's diet. The following fish species (Litte tunny, Red drum, Spotted eagleray, Escolar, Swordfish, Big-scale pomfret, Cortez flounder, Largemouth blackbass, Periche mojarra, Florida Pompano) were analyzed according to the AOAC and Keller techniques to determine their protein, phosphorus, sodium, potassium, cholesterol, vitamins D(3) and E, and n-3 EPA+DHA content. These results were used to calculate relations between nutrients. The protein in the analyzed species ranged from 16.5 g/100 g of fillet (Largemouth black bass) to 27.2 g/100 g (Red drum); the lowest phosphorus value was 28.6 mg/100 g (Periche mojarra) and the highest 216.3 mg/100 g (Spotted eagle ray). 80% of the fish presented > 100 mg EPA + DHA in 100 g of fillet. By its Phosphorus/gProtein ratio, Escolar and Swordfish could not be included in the renal diet; Little tunny, Escolar, Big-scale pomfret, Largemouth black-bass, Periche mojarra and Florida Pompano presented a lower Phosphorus/EPA + DHA ratio. Florida pompano is the most recommended specie for renal patients, due to its optimal nutrient relations. However, all analyzed species, except Escolar and Swordfish, could be included in renal diets.

  1. MOS modeling hierarchy including radiation effects

    International Nuclear Information System (INIS)

    Alexander, D.R.; Turfler, R.M.

    1975-01-01

    A hierarchy of modeling procedures has been developed for MOS transistors, circuit blocks, and integrated circuits which include the effects of total dose radiation and photocurrent response. The models were developed for use with the SCEPTRE circuit analysis program, but the techniques are suitable for other modern computer aided analysis programs. The modeling hierarchy permits the designer or analyst to select the level of modeling complexity consistent with circuit size, parametric information, and accuracy requirements. Improvements have been made in the implementation of important second order effects in the transistor MOS model, in the definition of MOS building block models, and in the development of composite terminal models for MOS integrated circuits

  2. Drug delivery device including electrolytic pump

    KAUST Repository

    Foulds, Ian G.; Buttner, Ulrich; Yi, Ying

    2016-01-01

    Systems and methods are provided for a drug delivery device and use of the device for drug delivery. In various aspects, the drug delivery device combines a “solid drug in reservoir” (SDR) system with an electrolytic pump. In various aspects an improved electrolytic pump is provided including, in particular, an improved electrolytic pump for use with a drug delivery device, for example an implantable drug delivery device. A catalytic reformer can be incorporated in a periodically pulsed electrolytic pump to provide stable pumping performance and reduced actuation cycle.

  3. Drug delivery device including electrolytic pump

    KAUST Repository

    Foulds, Ian G.

    2016-03-31

    Systems and methods are provided for a drug delivery device and use of the device for drug delivery. In various aspects, the drug delivery device combines a “solid drug in reservoir” (SDR) system with an electrolytic pump. In various aspects an improved electrolytic pump is provided including, in particular, an improved electrolytic pump for use with a drug delivery device, for example an implantable drug delivery device. A catalytic reformer can be incorporated in a periodically pulsed electrolytic pump to provide stable pumping performance and reduced actuation cycle.

  4. Reference Design Description for a Geologic Repository

    International Nuclear Information System (INIS)

    2000-01-01

    One of the current major national environmental problems is the safe disposal of large quantities of spent nuclear fuel and high-level radioactive waste materials, which are rapidly accumulating throughout the country. These radioactive byproducts are generated as the result of national defense activities and from the generation of electricity by commercial nuclear power plants. At present, spent nuclear fuel is accumulating at over 70 power plant sites distributed throughout 33 states. The safe disposal of these high-level radioactive materials at a central disposal facility is a high national priority. This Reference Design Description explains the current design for a potential geologic repository that may be located at Yucca Mountain in Nevada for the disposal of spent nuclear fuel and high-level radioactive waste materials. This document describes a possible design for the three fundamental parts of a repository: a surface facility, subsurface repository, and waste packaging. It also presents the current conceptual design of the key engineering systems for the final four phases of repository processes: operations, monitoring, closure, and postclosure. In accordance with current law, this design does not include an interim storage option. In addition, this Reference Design Description reviews the expected long-term performance of the potential repository. It describes the natural barrier system which, together with the engineered systems, achieves the repository objectives. This design will protect the public and the environment by allowing the safe disposal of radioactive waste received from government-owned custodial spent fuel sites, high-level radioactive waste sites, and commercial power reactor sites. All design elements meet or exceed applicable regulations governing the disposal of high-level radioactive waste. The design will provide safe disposal of waste materials for at least a 10,000 year period. During this time interval, natural radioactive decay

  5. Description of surface systems. Preliminary site description. Forsmark area Version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias [ed.

    2005-06-01

    Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

  6. Description of surface systems. Preliminary site description. Forsmark area Version 1.2

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2005-06-01

    Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

  7. Energy principle with included boundary conditions

    International Nuclear Information System (INIS)

    Lehnert, B.

    1994-01-01

    Earlier comments by the author on the limitations of the classical form of the extended energy principle are supported by a complementary analysis on the potential energy change arising from free-boundary displacements of a magnetically confined plasma. In the final formulation of the extended principle, restricted displacements, satisfying pressure continuity by means of plasma volume currents in a thin boundary layer, are replaced by unrestricted (arbitrary) displacements which can give rise to induced surface currents. It is found that these currents contribute to the change in potential energy, and that their contribution is not taken into account by such a formulation. A general expression is further given for surface currents induced by arbitrary displacements. The expression is used to reformulate the energy principle for the class of displacements which satisfy all necessary boundary conditions, including that of the pressure balance. This makes a minimization procedure of the potential energy possible, for the class of all physically relevant test functions which include the constraints imposed by the boundary conditions. Such a procedure is also consistent with a corresponding variational calculus. (Author)

  8. Aerosol simulation including chemical and nuclear reactions

    International Nuclear Information System (INIS)

    Marwil, E.S.; Lemmon, E.C.

    1985-01-01

    The numerical simulation of aerosol transport, including the effects of chemical and nuclear reactions presents a challenging dynamic accounting problem. Particles of different sizes agglomerate and settle out due to various mechanisms, such as diffusion, diffusiophoresis, thermophoresis, gravitational settling, turbulent acceleration, and centrifugal acceleration. Particles also change size, due to the condensation and evaporation of materials on the particle. Heterogeneous chemical reactions occur at the interface between a particle and the suspending medium, or a surface and the gas in the aerosol. Homogeneous chemical reactions occur within the aersol suspending medium, within a particle, and on a surface. These reactions may include a phase change. Nuclear reactions occur in all locations. These spontaneous transmutations from one element form to another occur at greatly varying rates and may result in phase or chemical changes which complicate the accounting process. This paper presents an approach for inclusion of these effects on the transport of aerosols. The accounting system is very complex and results in a large set of stiff ordinary differential equations (ODEs). The techniques for numerical solution of these ODEs require special attention to achieve their solution in an efficient and affordable manner. 4 refs

  9. Addressing Stillbirth in India Must Include Men.

    Science.gov (United States)

    Roberts, Lisa; Montgomery, Susanne; Ganesh, Gayatri; Kaur, Harinder Pal; Singh, Ratan

    2017-07-01

    Millennium Development Goal 4, to reduce child mortality, can only be achieved by reducing stillbirths globally. A confluence of medical and sociocultural factors contribute to the high stillbirth rates in India. The psychosocial aftermath of stillbirth is a well-documented public health problem, though less is known of the experience for men, particularly outside of the Western context. Therefore, men's perceptions and knowledge regarding reproductive health, as well as maternal-child health are important. Key informant interviews (n = 5) were analyzed and 28 structured interviews were conducted using a survey based on qualitative themes. Qualitative themes included men's dual burden and right to medical and reproductive decision making power. Wives were discouraged from expressing grief and pushed to conceive again. If not successful, particularly if a son was not conceived, a second wife was considered a solution. Quantitative data revealed that men with a history of stillbirths had greater anxiety and depression, perceived less social support, but had more egalitarian views towards women than men without stillbirth experience. At the same time fathers of stillbirths were more likely to be emotionally or physically abusive. Predictors of mental health, attitudes towards women, and perceived support are discussed. Patriarchal societal values, son preference, deficient women's autonomy, and sex-selective abortion perpetuate the risk for future poor infant outcomes, including stillbirth, and compounds the already higher risk of stillbirth for males. Grief interventions should explore and take into account men's perceptions, attitudes, and behaviors towards reproductive decision making.

  10. 48 CFR 52.214-21 - Descriptive Literature.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Descriptive Literature. 52....214-21 Descriptive Literature. As prescribed in 14.201-6(p)(1), insert the following provision: Descriptive Literature (APR 2002) (a) Descriptive literature, as used in this provision, means information...

  11. Including gauge corrections to thermal leptogenesis

    Energy Technology Data Exchange (ETDEWEB)

    Huetig, Janine

    2013-05-17

    This thesis provides the first approach of a systematic inclusion of gauge corrections to leading order to the ansatz of thermal leptogenesis. We have derived a complete expression for the integrated lepton number matrix including all resummations needed. For this purpose, a new class of diagram has been invented, namely the cylindrical diagram, which allows diverse investigations into the topic of leptogenesis such as the case of resonant leptogenesis. After a brief introduction of the topic of the baryon asymmetry in the universe and a discussion of its most promising solutions as well as their advantages and disadvantages, we have presented our framework of thermal leptogenesis. An effective model was described as well as the associated Feynman rules. The basis for using nonequilibrium quantum field theory has been built in chapter 3. At first, the main definitions have been presented for equilibrium thermal field theory, afterwards we have discussed the Kadanoff-Baym equations for systems out of equilibrium using the example of the Majorana neutrino. The equations have also been solved in the context of leptogenesis in chapter 4. Since gauge corrections play a crucial role throughout this thesis, we have also repeated the naive ansatz by replacing the free equilibrium propagator by propagators including thermal damping rates due to the Standard Model damping widths for lepton and Higgs fields. It is shown that this leads to a comparable result to the solutions of the Boltzmann equations for thermal leptogenesis. Thus it becomes obvious that Standard Model corrections are not negligible for thermal leptogenesis and therefore need to be included systematically from first principles. In order to achieve this we have started discussing the calculation of ladder rung diagrams for Majorana neutrinos using the HTL and the CTL approach in chapter 5. All gauge corrections are included in this framework and thus it has become the basis for the following considerations

  12. Including gauge corrections to thermal leptogenesis

    International Nuclear Information System (INIS)

    Huetig, Janine

    2013-01-01

    This thesis provides the first approach of a systematic inclusion of gauge corrections to leading order to the ansatz of thermal leptogenesis. We have derived a complete expression for the integrated lepton number matrix including all resummations needed. For this purpose, a new class of diagram has been invented, namely the cylindrical diagram, which allows diverse investigations into the topic of leptogenesis such as the case of resonant leptogenesis. After a brief introduction of the topic of the baryon asymmetry in the universe and a discussion of its most promising solutions as well as their advantages and disadvantages, we have presented our framework of thermal leptogenesis. An effective model was described as well as the associated Feynman rules. The basis for using nonequilibrium quantum field theory has been built in chapter 3. At first, the main definitions have been presented for equilibrium thermal field theory, afterwards we have discussed the Kadanoff-Baym equations for systems out of equilibrium using the example of the Majorana neutrino. The equations have also been solved in the context of leptogenesis in chapter 4. Since gauge corrections play a crucial role throughout this thesis, we have also repeated the naive ansatz by replacing the free equilibrium propagator by propagators including thermal damping rates due to the Standard Model damping widths for lepton and Higgs fields. It is shown that this leads to a comparable result to the solutions of the Boltzmann equations for thermal leptogenesis. Thus it becomes obvious that Standard Model corrections are not negligible for thermal leptogenesis and therefore need to be included systematically from first principles. In order to achieve this we have started discussing the calculation of ladder rung diagrams for Majorana neutrinos using the HTL and the CTL approach in chapter 5. All gauge corrections are included in this framework and thus it has become the basis for the following considerations

  13. A description of LUSTRA's common field sites

    International Nuclear Information System (INIS)

    Berggren, Dan; Bergkvist, Bo; Johansson, Maj-Britt; Melkerud, Per-Arne; Nilsson, Aake; Olsson, Mats; Langvall, Ola; Majdi, Hooshang; Weslien, Per

    2004-01-01

    arena, and thus LUSTRA has gradually put more focus on the Kyoto process. LUSTRA was evaluated during spring 2002 and the general overall statement was that 'The ambitious goals of the LUSTRA program are very good and seem to be well understood by the participating researchers. However, for a second phase a focus on synthesis and synergy is recommended'. In LUSTRA we are performing integrated research on C fluxes at three common field sites (CFS) situated in a south-north transect in Sweden: Asa, Knottaasen and Flakaliden. Measurements started summer 2000. The intention was to establish a climate gradient through Sweden but keep other environmental parameters rather similar. Also within each site the ambition was to get a hydrological gradient going from dry, over mesic to moist conditions, i.e. from deep lying ground water level to shallow groundwater. According to the advises by the reviewers of LUSTRA phase 1, more focus will be on syntheses during LUSTRA phase 2 (2003-2006). However, measurements at the CFS will be continued during 2003 and 2004. The objectives of this paper are (i) to give a general description of the sites, (ii) to describe the abiotic measurements made at the different sites, including the data base, (iii) to describe the methods used to obtain background information about soils and vegetation (C pools and fluxes) and (iv) to present the background information about soils and vegetation

  14. Analytical methodology and facility description spent fuel policy

    Energy Technology Data Exchange (ETDEWEB)

    1978-08-01

    Three generic environmental impact statements (GEISs) on domestic fuels, foreign fuels, and storage charges are being prepared to provide environmental input into decisions on whether, and if so how the 1977 Presidential policy on spent fuel storage should be implmented. This report provides background information for two of these environmental impact statements: Storage of U.S. Spent Power Reactor Fuel and Storage of Foreign Spent Power Reactor Fuel. It includes the analytical methodology used in GEISs to assess the environmental effects and a description of the facilities used in the two GEISs.

  15. Analytical methodology and facility description spent fuel policy

    International Nuclear Information System (INIS)

    1978-08-01

    Three generic environmental impact statements (GEISs) on domestic fuels, foreign fuels, and storage charges are being prepared to provide environmental input into decisions on whether, and if so how the 1977 Presidential policy on spent fuel storage should be implmented. This report provides background information for two of these environmental impact statements: Storage of U.S. Spent Power Reactor Fuel and Storage of Foreign Spent Power Reactor Fuel. It includes the analytical methodology used in GEISs to assess the environmental effects and a description of the facilities used in the two GEISs

  16. Modeling RHIC using the standard machine formal accelerator description

    International Nuclear Information System (INIS)

    Pilat, F.; Trahern, C.G.; Wei, J.

    1997-01-01

    The Standard Machine Format (SMF) is a structured description of accelerator lattices which supports both the hierarchy of beam lines and generic lattice objects as well as those deviations (field errors, alignment efforts, etc.) associated with each component of the as-installed machine. In this paper we discuss the use of SMF to describe the Relativistic Heavy Ion Collider (RHIC) as well as the ancillary data structures (such as field quality measurements) that are necessarily incorporated into the RHIC SMF model. Future applications of SMF are outlined, including its use in the RHIC operational environment

  17. PROJECT W-551 INTERIM PRETREATMENT SYSTEM PRECONCEPTUAL CANDIDATE TECHNOLOGY DESCRIPTIONS

    Energy Technology Data Exchange (ETDEWEB)

    MAY TH

    2008-08-12

    The Office of River Protection (ORP) has authorized a study to recommend and select options for interim pretreatment of tank waste and support Waste Treatment Plant (WTP) low activity waste (LAW) operations prior to startup of all the WTP facilities. The Interim Pretreatment System (IPS) is to be a moderately sized system which separates entrained solids and 137Cs from tank waste for an interim time period while WTP high level waste vitrification and pretreatment facilities are completed. This study's objective is to prepare pre-conceptual technology descriptions that expand the technical detail for selected solid and cesium separation technologies. This revision includes information on additional feed tanks.

  18. Model of Team Organization and Behavior and Team Description Method

    Science.gov (United States)

    1984-10-01

    PERFORMING ORG& REPORT’ NUMBER 7.AUTHIOR(&) 0. CONTRACT OR GRANT NUMOSR(ej J. Thomas Roth Rohn J. Hritz HDA 903-81-C-0198: VEa Donald W. McGill 9...team descriptions are included, acid procedures for data recording are provided. 4q-4 4 iv, G OP S• . . • ,," $1 . . ’ __ _ _ _ ’ / . • , Utilization...Listing of thi! number acid identification of the roles adopted by team members in the actual team structure, along with KOS and primary equipment

  19. PCR IN TRAUMATOLOGY AND ORTHOPAEDICS: METHOD DESCRIPTION AND APPLICABILITY

    Directory of Open Access Journals (Sweden)

    E. M. Polyakova

    2014-01-01

    Full Text Available Review brief presents description of polymerase chain reaction method (PCR and its most common variants. Three PCR-based lines of research, carried out in the traumatology and orthopaedics, include identifying a causative agents of the implant-associated infection after orthopaedic surgery; detection of antibiotic resistance genes and biofilm forming genes. It was shown that PCR can be used as additional method for detection of genetic disorders, significant for traumatology and orthopaedics, and for investigation of cartilage and bone regeneration.

  20. The surgery of peripheral nerves (including tumors)

    DEFF Research Database (Denmark)

    Fugleholm, Kåre

    2013-01-01

    Surgical pathology of the peripheral nervous system includes traumatic injury, entrapment syndromes, and tumors. The recent significant advances in the understanding of the pathophysiology and cellular biology of peripheral nerve degeneration and regeneration has yet to be translated into improved...... surgical techniques and better outcome after peripheral nerve injury. Decision making in peripheral nerve surgery continues to be a complex challenge, where the mechanism of injury, repeated clinical evaluation, neuroradiological and neurophysiological examination, and detailed knowledge of the peripheral...... nervous system response to injury are prerequisite to obtain the best possible outcome. Surgery continues to be the primary treatment modality for peripheral nerve tumors and advances in adjuvant oncological treatment has improved outcome after malignant peripheral nerve tumors. The present chapter...

  1. AMS at the ANU including biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Fifield, L K; Allan, G L; Cresswell, R G; Ophel, T R [Australian National Univ., Canberra, ACT (Australia); King, S J; Day, J P [Manchester Univ. (United Kingdom). Dept. of Chemistry

    1994-12-31

    An extensive accelerator mass spectrometry program has been conducted on the 14UD accelerator at the Australian National University since 1986. In the two years since the previous conference, the research program has expanded significantly to include biomedical applications of {sup 26}Al and studies of landform evolution using isotopes produced in situ in surface rocks by cosmic ray bombardment. The system is now used for the measurement of {sup 10}Be, {sup 14}C, {sup 26}Al, {sup 36}Cl, {sup 59}Ni and {sup 129}I, and research is being undertaken in hydrology, environmental geochemistry, archaeology and biomedicine. On the technical side, a new test system has permitted the successful off-line development of a high-intensity ion source. A new injection line to the 14UD has been established and the new source is now in position and providing beams to the accelerator. 4 refs.

  2. AMS at the ANU including biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Fifield, L.K.; Allan, G.L.; Cresswell, R.G.; Ophel, T.R. [Australian National Univ., Canberra, ACT (Australia); King, S.J.; Day, J.P. [Manchester Univ. (United Kingdom). Dept. of Chemistry

    1993-12-31

    An extensive accelerator mass spectrometry program has been conducted on the 14UD accelerator at the Australian National University since 1986. In the two years since the previous conference, the research program has expanded significantly to include biomedical applications of {sup 26}Al and studies of landform evolution using isotopes produced in situ in surface rocks by cosmic ray bombardment. The system is now used for the measurement of {sup 10}Be, {sup 14}C, {sup 26}Al, {sup 36}Cl, {sup 59}Ni and {sup 129}I, and research is being undertaken in hydrology, environmental geochemistry, archaeology and biomedicine. On the technical side, a new test system has permitted the successful off-line development of a high-intensity ion source. A new injection line to the 14UD has been established and the new source is now in position and providing beams to the accelerator. 4 refs.

  3. CERN Technical Training: LABVIEW courses include RADE

    CERN Multimedia

    HR Department

    2009-01-01

    The contents of the "LabView Basic I" and "LabView Intermediate II" courses have recently been changed to include, respectively, an introduction to and expert training in the Rapid Application Development Environment (RADE). RADE is a LabView-based application developed at CERN to integrate LabView in the accelerator and experiment control infrastructure. It is a suitable solution to developing expert tools, machine development analysis and independent test facilities. The course names have also been changed to "LabVIEW Basics I with RADE Introduction" and "LabVIEW Intermediate II with Advanced RADE Application". " LabVIEW Basics I with RADE Introduction" is designed for: Users preparing to develop applications using LabVIEW, or NI Developer Suite; users and technical managers evaluating LabVIEW or NI Developer Suite in purchasing decisions; users pursuing the Certified LabVIEW Developer certification. The course pr...

  4. CERN Technical Training: LABVIEW courses include RADE

    CERN Multimedia

    HR Department

    2009-01-01

    The contents of the "LabView Basic I" and "LabView Intermediate II" courses have recently been changed to include, respectively, an introduction to and expert training in the Rapid Application Development Environment (RADE). RADE is a LabView-based application developed at CERN to integrate LabView in the accelerator and experiment control infrastructure. It is a suitable solution to developing expert tools, machine development analysis and independent test facilities. The course names have also been changed to "LabVIEW Basics I with RADE Introduction" and "LabVIEW Intermediate II with Advanced RADE Application". " LabVIEW Basics I with RADE Introduction" is designed for: Users preparing to develop applications using LabVIEW, or NI Developer Suite; users and technical managers evaluating LabVIEW or NI Developer Suite in purchasing decisions; users pursuing the Certified LabVIEW Developer certification. The course prepares participants to develop test and measurement, da...

  5. CERN Technical Training: LABVIEW courses include RADE

    CERN Multimedia

    HR Department

    2009-01-01

    The contents of "LabView Basic I" and "LabView Intermediate II" trainings have been recently changed to include, respectively, an introduction and an expert training on the Rapid Application Development Environment (RADE). RADE is a LabView-based application developed at CERN to integrate LabView in the accelerator and experiment control infrastructure. It is a suitable solution to develop expert tools, machine development analysis and independent test facilities. The course names have also been changed to "LabVIEW Basics I with RADE Introduction" and "LabVIEW Intermediate II with Advanced RADE Application". " LabVIEW Basics I with RADE Introduction" is designed for: Users preparing to develop applications using LabVIEW, or NI Developer Suite; users and technical managers evaluating LabVIEW or NI Developer Suite in purchasing decisions; users pursuing the Certified LabVIEW Developer certification. The course prepare...

  6. Critical point anomalies include expansion shock waves

    Energy Technology Data Exchange (ETDEWEB)

    Nannan, N. R., E-mail: ryan.nannan@uvs.edu [Mechanical Engineering Discipline, Anton de Kom University of Suriname, Leysweg 86, PO Box 9212, Paramaribo, Suriname and Process and Energy Department, Delft University of Technology, Leeghwaterstraat 44, 2628 CA Delft (Netherlands); Guardone, A., E-mail: alberto.guardone@polimi.it [Department of Aerospace Science and Technology, Politecnico di Milano, Via La Masa 34, 20156 Milano (Italy); Colonna, P., E-mail: p.colonna@tudelft.nl [Propulsion and Power, Delft University of Technology, Kluyverweg 1, 2629 HS Delft (Netherlands)

    2014-02-15

    From first-principle fluid dynamics, complemented by a rigorous state equation accounting for critical anomalies, we discovered that expansion shock waves may occur in the vicinity of the liquid-vapor critical point in the two-phase region. Due to universality of near-critical thermodynamics, the result is valid for any common pure fluid in which molecular interactions are only short-range, namely, for so-called 3-dimensional Ising-like systems, and under the assumption of thermodynamic equilibrium. In addition to rarefaction shock waves, diverse non-classical effects are admissible, including composite compressive shock-fan-shock waves, due to the change of sign of the fundamental derivative of gasdynamics.

  7. CLIC expands to include the Southern Hemisphere

    CERN Multimedia

    Roberto Cantoni

    2010-01-01

    Australia has recently joined the CLIC collaboration: the enlargement will bring new expertise and resources to the project, and is especially welcome in the wake of CERN budget redistributions following the recent adoption of the Medium Term Plan.   The countries involved in CLIC collaboration With the signing of a Memorandum of Understanding on 26 August 2010, the ACAS network (Australian Collaboration for Accelerator Science) became the 40th member of in the multilateral CLIC collaboration making Australia the 22nd country to join the collaboration. “The new MoU was signed by the ACAS network, which includes the Australian Synchrotron and the University of Melbourne”, explains Jean-Pierre Delahaye, CLIC Study Leader. “Thanks to their expertise, the Australian institutes will contribute greatly to the CLIC damping rings and the two-beam test modules." Institutes from any country wishing to join the CLIC collaboration are invited to assume responsibility o...

  8. Should Broca's area include Brodmann area 47?

    Science.gov (United States)

    Ardila, Alfredo; Bernal, Byron; Rosselli, Monica

    2017-02-01

    Understanding brain organization of speech production has been a principal goal of neuroscience. Historically, brain speech production has been associated with so-called Broca’s area (Brodmann area –BA- 44 and 45), however, modern neuroimaging developments suggest speech production is associated with networks rather than with areas. The purpose of this paper was to analyze the connectivity of BA47 ( pars orbitalis) in relation to language . A meta-analysis was conducted to assess the language network in which BA47 is involved. The Brainmap database was used. Twenty papers corresponding to 29 experimental conditions with a total of 373 subjects were included. Our results suggest that BA47 participates in a “frontal language production system” (or extended Broca’s system). The BA47  connectivity found is also concordant with a minor role in language semantics. BA47 plays a central role in the language production system.

  9. Musculoskeletal ultrasound including definitions for ultrasonographic pathology

    DEFF Research Database (Denmark)

    Wakefield, RJ; Balint, PV; Szkudlarek, Marcin

    2005-01-01

    Ultrasound (US) has great potential as an outcome in rheumatoid arthritis trials for detecting bone erosions, synovitis, tendon disease, and enthesopathy. It has a number of distinct advantages over magnetic resonance imaging, including good patient tolerability and ability to scan multiple joints...... in a short period of time. However, there are scarce data regarding its validity, reproducibility, and responsiveness to change, making interpretation and comparison of studies difficult. In particular, there are limited data describing standardized scanning methodology and standardized definitions of US...... pathologies. This article presents the first report from the OMERACT ultrasound special interest group, which has compared US against the criteria of the OMERACT filter. Also proposed for the first time are consensus US definitions for common pathological lesions seen in patients with inflammatory arthritis....

  10. Grand unified models including extra Z bosons

    International Nuclear Information System (INIS)

    Li Tiezhong

    1989-01-01

    The grand unified theories (GUT) of the simple Lie groups including extra Z bosons are discussed. Under authors's hypothesis there are only SU 5+m SO 6+4n and E 6 groups. The general discussion of SU 5+m is given, then the SU 6 and SU 7 are considered. In SU 6 the 15+6 * +6 * fermion representations are used, which are not same as others in fermion content, Yukawa coupling and broken scales. A conception of clans of particles, which are not families, is suggested. These clans consist of extra Z bosons and the corresponding fermions of the scale. The all of fermions in the clans are down quarks except for the standard model which consists of Z bosons and 15 fermions, therefore, the spectrum of the hadrons which are composed of these down quarks are different from hadrons at present

  11. Including climate change in energy investment decisions

    International Nuclear Information System (INIS)

    Ybema, J.R.; Boonekamp, P.G.M.; Smit, J.T.J.

    1995-08-01

    To properly take climate change into account in the analysis of energy investment decisions, it is required to apply decision analysis methods that are capable of considering the specific characteristics of climate change (large uncertainties, long term horizon). Such decision analysis methods do exist. They can explicitly include evolving uncertainties, multi-stage decisions, cumulative effects and risk averse attitudes. Various methods are considered in this report and two of these methods have been selected: hedging calculations and sensitivity analysis. These methods are applied to illustrative examples, and its limitations are discussed. The examples are (1a) space heating and hot water for new houses from a private investor perspective and (1b) as example (1a) but from a government perspective, (2) electricity production with an integrated coal gasification combined cycle (ICGCC) with or without CO 2 removal, and (3) national energy strategy to hedge for climate change. 9 figs., 21 tabs., 42 refs., 1 appendix

  12. Education Program on Fossil Resources Including Coal

    Science.gov (United States)

    Usami, Masahiro

    Fossil fuels including coal play a key role as crucial energies in contributing to economic development in Asia. On the other hand, its limited quantity and the environmental problems causing from its usage have become a serious global issue and a countermeasure to solve such problems is very much demanded. Along with the pursuit of sustainable development, environmentally-friendly use of highly efficient fossil resources should be therefore, accompanied. Kyushu-university‧s sophisticated research through long years of accumulated experience on the fossil resources and environmental sectors together with the advanced large-scale commercial and empirical equipments will enable us to foster cooperative research and provide internship program for the future researchers. Then, this program is executed as a consignment business from the Ministry of Economy, Trade and Industry from 2007 fiscal year to 2009 fiscal year. The lecture that uses the textbooks developed by this program is scheduled to be started a course in fiscal year 2010.

  13. Engineer/constructor description of work for Tank 241-SY-102 retrieval system, project W-211, initial tank retrieval systems

    International Nuclear Information System (INIS)

    Rieck, C.A.

    1996-02-01

    This document provides a description of work for the design and construction of a waste retrieval system for Tank 241-SY-102. The description of work includes a working estimate and schedule, as well as a narrative description and sketches of the waste retrieval system. The working estimate and schedule are within the established baselines for the Tank 241-SY-102 retrieval system. The technical baseline is provided in Functional Design Criteria, WHC-SD-W211-FDC-001, Revision 2

  14. Descriptive catalogue of radioactive waste families

    International Nuclear Information System (INIS)

    2004-01-01

    This document describes the different types of radioactive wastes produced in France or which are expected to be produced in the future. The wastes have been shared into different families having similar characteristics. A description is made for each family: general presentation, photos, position of the family in the French classification, industrial origin, status of production. Some informations about the raw waste and its conditioning process are also given. The qualitative description is completed by some numerical data like: the quantity produced in the past and to be produced in the future, the evaluation of the radioactivity in 2002 and 2020, and the evaluation of the thermal power when it exists. Finally, some informations are given about the risk of toxicity of some chemical species or compounds. (J.S.)

  15. Parametric description of the quantum measurement process

    Science.gov (United States)

    Liuzzo-Scorpo, P.; Cuccoli, A.; Verrucchi, P.

    2015-08-01

    We present a description of the measurement process based on the parametric representation with environmental coherent states. This representation is specifically tailored for studying quantum systems whose environment needs being considered through the quantum-to-classical crossover. Focusing upon projective measures, and exploiting the connection between large-N quantum theories and the classical limit of related ones, we manage to push our description beyond the pre-measurement step. This allows us to show that the outcome production follows from a global-symmetry breaking, entailing the observed system's state reduction, and that the statistical nature of the process is brought about, together with the Born's rule, by the macroscopic character of the measuring apparatus.

  16. System Design Description PFP Thermal Stabilization

    International Nuclear Information System (INIS)

    RISENMAY, H.R.

    2000-01-01

    The purpose of this document is to provide a system design description (SDD) and design basis for the Plutonium Finishing Plant (PFP) Thermal Stabilization project. The chief objective of the SDD is to document the Structures, Systems, and Components (SSCs) that establish and maintain the facility Safety Envelope necessary for normal safe operation of the facility; as identified in the FSAR, the OSRs, and Safety Assessment Documents (SADs). This safety equipment documentation should satisfy guidelines for the SDD given in WHC-SD-CP-TI-18 1, Criteria for Identification and Control of Equipment Necessary for Preservation of the Safety Envelope and Safe Operation of PFP. The basis for operational, alarm response, maintenance, and surveillance procedures are also identified and justified in this document. This document and its appendices address the following elements of the PFP Thermal Stabilization project: Functional and design requirements; Design description; Safety Envelope Analysis; Safety Equipment Class; and Operational, maintenance and surveillance procedures

  17. A Modal Description of Multiport Antennas

    Directory of Open Access Journals (Sweden)

    Jonathan J. Lynch

    2011-01-01

    Full Text Available This paper presents a modal description of multiport antennas that leads directly to a rigorous network representation and simple quadratic expressions for gain, efficiency, and effective area. The analysis shows that the transmitting and receiving properties of an element antenna array are exactly described by a 2×2 element scattering matrix together with a set of orthonormal mode functions and accounts for effects such as mutual coupling, scattering, reflection, and losses. The approach is quite general, only requiring that the antenna be finite and reciprocal. The scattering network description simplifies accounting of power flow while retaining a close connection to the physical antenna characteristics. The orthonormal mode functions provide a complete basis for radiated and received fields, facilitating beamforming. The theory provides rigorous definitions of input-output signals and links them to the underlying electromagnetics in a straightforward manner.

  18. Combinatorial description of space and strong interactions

    International Nuclear Information System (INIS)

    Zenczykowski, P.

    1988-01-01

    A reinterpretation is given of a successful phenomenological approach to hadron self-energy effects known as the unitarized quark model. General arguments are given that the proper description of strong interactions may require abandoning the assignment of a primary role to continuous concepts such as position and momentum in favor of discrete ones such as spin or W-spin. The reinterpretation exploits an analogy between the W-spin diagrams occurring in the calculations of hadronic loop effects and the spin network idea of Penrose. A connection between the S-matrix approach to hadron masses and the purely algebraic approach characteristic of the quark model is indicated. Several hadron mass relations generated by a resulting SU(6)/sub w/-group-theoretic expression are presented and discussed. Results of an attempt to generalize the scheme to the description of hadron vertices are reported

  19. Hydrogen electrode reaction: A complete kinetic description

    International Nuclear Information System (INIS)

    Quaino, P.M.; Gennero de Chialvo, M.R.; Chialvo, A.C.

    2007-01-01

    The kinetic description of the hydrogen electrode reaction (HER) in the whole range of overpotentials (-0.2 < η (V) < 0.40) is presented. The Volmer-Heyrovsky-Tafel mechanism was solved considering simultaneously the following items: (i) the diffusional contribution of the molecular hydrogen from and towards the electrode surface, (ii) the forward and backward reaction rates of each elementary step and (iii) a Frumkin type adsorption for the reaction intermediate. In order to verify the descriptive capability of the kinetic expressions derived, an experimental study of the HER was carried out on a rotating platinum disc electrode in acid solution. From the correlation of these results the elementary kinetic parameters were evaluated and several aspects related to the kinetic mechanism were discussed. Finally, the use of these kinetic expressions to interpret results obtained on microelectrodes is also analysed

  20. XML for Detector Description at GLAST

    Energy Technology Data Exchange (ETDEWEB)

    Bogart, Joanne

    2002-04-30

    The problem of representing a detector in a form which is accessible to a variety of applications, allows retrieval of information in ways which are natural to those applications, and is maintainable has been vexing physicists for some time. Although invented to address an entirely different problem domain, the document markup meta-language XML is well-suited to detector description. This paper describes its use for a GLAST detector.

  1. RSYST - a short description of the modules

    International Nuclear Information System (INIS)

    Ruehle, R.

    1976-04-01

    The modular system RSYST is used for reactor and shielding calculations. A data base managed by a central program, data blocks containing structure descriptions, and hierarchical linking of data blocks enable flexible management of all data. Module sequences are formulated using a user command language. The language features logical branches, variables and arithmetic experssions. Sections of the user language may be stored in the data base and activated at any time. (orig.) [de

  2. Unified geometric description of black hole thermodynamics

    International Nuclear Information System (INIS)

    Alvarez, Jose L.; Quevedo, Hernando; Sanchez, Alberto

    2008-01-01

    In the space of thermodynamic equilibrium states we introduce a Legendre invariant metric which contains all the information about the thermodynamics of black holes. The curvature of this thermodynamic metric becomes singular at those points where, according to the analysis of the heat capacities, phase transitions occur. This result is valid for the Kerr-Newman black hole and all its special cases and, therefore, provides a unified description of black hole phase transitions in terms of curvature singularities.

  3. Thin film description by wavelet coefficients statistics

    Czech Academy of Sciences Publication Activity Database

    Boldyš, Jiří; Hrach, R.

    2005-01-01

    Roč. 55, č. 1 (2005), s. 55-64 ISSN 0011-4626 Grant - others:GA UK(CZ) 173/2003 Institutional research plan: CEZ:AV0Z10750506 Keywords : thin films * wavelet transform * descriptors * histogram model Subject RIV: BD - Theory of Information Impact factor: 0.360, year: 2005 http://library.utia.cas.cz/separaty/2009/ZOI/boldys-thin film description by wavelet coefficients statistics .pdf

  4. 1993 baseline solid waste management system description

    International Nuclear Information System (INIS)

    Armacost, L.L.; Fowler, R.A.; Konynenbelt, H.S.

    1994-02-01

    Pacific Northwest Laboratory has prepared this report under the direction of Westinghouse Hanford Company. The report provides an integrated description of the system planned for managing Hanford's solid low-level waste, low-level mixed waste, transuranic waste, and transuranic mixed waste. The primary purpose of this document is to illustrate a collective view of the key functions planned at the Hanford Site to handle existing waste inventories, as well as solid wastes that will be generated in the future. By viewing this system as a whole rather than as individual projects, key facility interactions and requirements are identified and a better understanding of the overall system may be gained. The system is described so as to form a basis for modeling the system at various levels of detail. Model results provide insight into issues such as facility capacity requirements, alternative system operating strategies, and impacts of system changes (ie., startup dates). This description of the planned Hanford solid waste processing system: defines a baseline system configuration; identifies the entering waste streams to be managed within the system; identifies basic system functions and waste flows; and highlights system constraints. This system description will evolve and be revised as issues are resolved, planning decisions are made, additional data are collected, and assumptions are tested and changed. Out of necessity, this document will also be revised and updated so that a documented system description, which reflects current system planning, is always available for use by engineers and managers. It does not provide any results generated from the many alternatives that will be modeled in the course of analyzing solid waste disposal options; such results will be provided in separate documents

  5. A phenomenological calculus of Wiener description space.

    Science.gov (United States)

    Richardson, I W; Louie, A H

    2007-10-01

    The phenomenological calculus is a categorical example of Robert Rosen's modeling relation. This paper is an alligation of the phenomenological calculus and generalized harmonic analysis, another categorical example. Our epistemological exploration continues into the realm of Wiener description space, in which constitutive parameters are extended from vectors to vector-valued functions of a real variable. Inherent in the phenomenology are fundamental representations of time and nearness to equilibrium.

  6. XML for detector description at GLAST

    International Nuclear Information System (INIS)

    Bogart, J.; Favretto, D.; Giannitrapani, R.

    2001-01-01

    The problem of representing a detector in a form which is accessible to a variety of applications, allows retrieval of information in ways which are natural to those applications, and is maintainable has been vexing physicists for some time. Although invented to address an entirely different problem domain, the document markup meta-language XML is well-suited to detector description. The author describes its use for a GLAST detector

  7. XML for Detector Description at GLAST

    International Nuclear Information System (INIS)

    Bogart, Joanne

    2002-01-01

    The problem of representing a detector in a form which is accessible to a variety of applications, allows retrieval of information in ways which are natural to those applications, and is maintainable has been vexing physicists for some time. Although invented to address an entirely different problem domain, the document markup meta-language XML is well-suited to detector description. This paper describes its use for a GLAST detector

  8. Descriptive studies of Purepecha: Introductory study

    Directory of Open Access Journals (Sweden)

    Violeta Vázquez Rojas Maldonado

    2013-12-01

    Full Text Available Seven papers in this volume are the result of a collective project of linguistic description. This introduction offers a general background for such enterprise. It provides information about some sociolinguistic and grammatical aspects of the Purepecha language, a list of some recent studies on the language, it describes the orthographic conventions employed. We also provide details about the elicitation methodology and the demographic information of the language consultants.

  9. Simple Parametric Model for Airfoil Shape Description

    Science.gov (United States)

    Ziemkiewicz, David

    2017-12-01

    We show a simple, analytic equation describing a class of two-dimensional shapes well suited for representation of aircraft airfoil profiles. Our goal was to create a description characterized by a small number of parameters with easily understandable meaning, providing a tool to alter the shape with optimization procedures as well as manual tweaks by the designer. The generated shapes are well suited for numerical analysis with 2D flow solving software such as XFOIL.

  10. Description of the Lewin Natural Gas Model

    International Nuclear Information System (INIS)

    Kuuskraa, V.; Godec, M.

    1989-01-01

    This paper provides a brief description of the Lewin Natural Gas Model, shows how this model differs in key features from the other models participating in EMF-9, and describes how the different modeling scenarios analyzed in EMF-9 were implemented in the Lewin model. This background helps explain the key results that have been gained from applying the Lewin model to the EMF scenarios

  11. Analysis of Smart Composite Structures Including Debonding

    Science.gov (United States)

    Chattopadhyay, Aditi; Seeley, Charles E.

    1997-01-01

    Smart composite structures with distributed sensors and actuators have the capability to actively respond to a changing environment while offering significant weight savings and additional passive controllability through ply tailoring. Piezoelectric sensing and actuation of composite laminates is the most promising concept due to the static and dynamic control capabilities. Essential to the implementation of these smart composites are the development of accurate and efficient modeling techniques and experimental validation. This research addresses each of these important topics. A refined higher order theory is developed to model composite structures with surface bonded or embedded piezoelectric transducers. These transducers are used as both sensors and actuators for closed loop control. The theory accurately captures the transverse shear deformation through the thickness of the smart composite laminate while satisfying stress free boundary conditions on the free surfaces. The theory is extended to include the effect of debonding at the actuator-laminate interface. The developed analytical model is implemented using the finite element method utilizing an induced strain approach for computational efficiency. This allows general laminate geometries and boundary conditions to be analyzed. The state space control equations are developed to allow flexibility in the design of the control system. Circuit concepts are also discussed. Static and dynamic results of smart composite structures, obtained using the higher order theory, are correlated with available analytical data. Comparisons, including debonded laminates, are also made with a general purpose finite element code and available experimental data. Overall, very good agreement is observed. Convergence of the finite element implementation of the higher order theory is shown with exact solutions. Additional results demonstrate the utility of the developed theory to study piezoelectric actuation of composite

  12. SNF/HLW Transfer System Description Document

    International Nuclear Information System (INIS)

    W. Holt

    2005-01-01

    The purpose of this system description document (SDD) is to establish requirements that drive the design of the spent nuclear fuel (SNF)/high-level radioactive waste (HLW) transfer system and associated bases, which will allow the design effort to proceed to license application. This SDD will be revised at strategic points as the design matures. This SDD identifies the requirements and describes the system design, as it currently exists, with emphasis on attributes of the design provided to meet the requirements. This SDD is an engineering tool for design control. Accordingly, the primary audience and users are design engineers. This SDD is part of an iterative design process. It leads the design process with regard to the flowdown of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD follows the design with regard to the description of the system. The description provided in this SDD reflects the current results of the design process

  13. Zγ production at NNLO including anomalous couplings

    Science.gov (United States)

    Campbell, John M.; Neumann, Tobias; Williams, Ciaran

    2017-11-01

    In this paper we present a next-to-next-to-leading order (NNLO) QCD calculation of the processes pp → l + l -γ and pp\\to ν \\overline{ν}γ that we have implemented in MCFM. Our calculation includes QCD corrections at NNLO both for the Standard Model (SM) and additionally in the presence of Zγγ and ZZγ anomalous couplings. We compare our implementation, obtained using the jettiness slicing approach, with a previous SM calculation and find broad agreement. Focusing on the sensitivity of our results to the slicing parameter, we show that using our setup we are able to compute NNLO cross sections with numerical uncertainties of about 0.1%, which is small compared to residual scale uncertainties of a few percent. We study potential improvements using two different jettiness definitions and the inclusion of power corrections. At √{s}=13 TeV we present phenomenological results and consider Zγ as a background to H → Zγ production. We find that, with typical cuts, the inclusion of NNLO corrections represents a small effect and loosens the extraction of limits on anomalous couplings by about 10%.

  14. Alternating phase focussing including space charge

    International Nuclear Information System (INIS)

    Cheng, W.H.; Gluckstern, R.L.

    1992-01-01

    Longitudinal stability can be obtained in a non-relativistic drift tube accelerator by traversing each gap as the rf accelerating field rises. However, the rising accelerating field leads to a transverse defocusing force which is usually overcome by magnetic focussing inside the drift tubes. The radio frequency quadrupole is one way of providing simultaneous longitudinal and transverse focusing without the use of magnets. One can also avoid the use of magnets by traversing alternate gaps between drift tubes as the field is rising and falling, thus providing an alternation of focussing and defocusing forces in both the longitudinal and transverse directions. The stable longitudinal phase space area is quite small, but recent efforts suggest that alternating phase focussing (APF) may permit low velocity acceleration of currents in the 100-300 ma range. This paper presents a study of the parameter space and a test of crude analytic predictions by adapting the code PARMILA, which includes space charge, to APF. 6 refs., 3 figs

  15. Probabilistic production simulation including CHP plants

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, H.V.; Palsson, H.; Ravn, H.F.

    1997-04-01

    A probabilistic production simulation method is presented for an energy system containing combined heat and power plants. The method permits incorporation of stochastic failures (forced outages) of the plants and is well suited for analysis of the dimensioning of the system, that is, for finding the appropriate types and capacities of production plants in relation to expansion planning. The method is in the tradition of similar approaches for the analysis of power systems, based on the load duration curve. The present method extends on this by considering a two-dimensional load duration curve where the two dimensions represent heat and power. The method permits the analysis of a combined heat and power system which includes all the basic relevant types of plants, viz., condensing plants, back pressure plants, extraction plants and heat plants. The focus of the method is on the situation where the heat side has priority. This implies that on the power side there may be imbalances between demand and production. The method permits quantification of the expected power overflow, the expected unserviced power demand, and the expected unserviced heat demand. It is shown that a discretization method as well as double Fourier series may be applied in algorithms based on the method. (au) 1 tab., 28 ills., 21 refs.

  16. Langevin simulations of QCD, including fermions

    International Nuclear Information System (INIS)

    Kronfeld, A.S.

    1986-02-01

    We encounter critical slow down in updating when xi/a -> infinite and in matrix inversion (needed to include fermions) when msub(q)a -> 0. A simulation that purports to solve QCD numerically will encounter these limits, so to face the challenge in the title of this workshop, we must cure the disease of critical slow down. Physically, this critical slow down is due to the reluctance of changes at short distances to propagate to large distances. Numerically, the stability of an algorithm at short wavelengths requires a (moderately) small step size; critical slow down occurs when the effective long wavelength step size becomes tiny. The remedy for this disease is an algorithm that propagates signals quickly throughout the system; i.e. one whose effective step size is not reduced for the long wavelength conponents of the fields. (Here the effective ''step size'' is essentially an inverse decorrelation time.) To do so one must resolve various wavelengths of the system and modify the dynamics (in CPU time) of the simulation so that all modes evolve at roughly the same rate. This can be achieved by introducing Fourier transforms. I show how to implement Fourier acceleration for Langevin updating and for conjugate gradient matrix inversion. The crucial feature of these algorithms that lends them to Fourier acceleration is that they update the lattice globally; hence the Fourier transforms are computed once per sweep rather than once per hit. (orig./HSI)

  17. SEEPAGE MODEL FOR PA INCLUDING DRIFT COLLAPSE

    International Nuclear Information System (INIS)

    C. Tsang

    2004-01-01

    The purpose of this report is to document the predictions and analyses performed using the seepage model for performance assessment (SMPA) for both the Topopah Spring middle nonlithophysal (Tptpmn) and lower lithophysal (Tptpll) lithostratigraphic units at Yucca Mountain, Nevada. Look-up tables of seepage flow rates into a drift (and their uncertainty) are generated by performing numerical simulations with the seepage model for many combinations of the three most important seepage-relevant parameters: the fracture permeability, the capillary-strength parameter 1/a, and the percolation flux. The percolation flux values chosen take into account flow focusing effects, which are evaluated based on a flow-focusing model. Moreover, multiple realizations of the underlying stochastic permeability field are conducted. Selected sensitivity studies are performed, including the effects of an alternative drift geometry representing a partially collapsed drift from an independent drift-degradation analysis (BSC 2004 [DIRS 166107]). The intended purpose of the seepage model is to provide results of drift-scale seepage rates under a series of parameters and scenarios in support of the Total System Performance Assessment for License Application (TSPA-LA). The SMPA is intended for the evaluation of drift-scale seepage rates under the full range of parameter values for three parameters found to be key (fracture permeability, the van Genuchten 1/a parameter, and percolation flux) and drift degradation shape scenarios in support of the TSPA-LA during the period of compliance for postclosure performance [Technical Work Plan for: Performance Assessment Unsaturated Zone (BSC 2002 [DIRS 160819], Section I-4-2-1)]. The flow-focusing model in the Topopah Spring welded (TSw) unit is intended to provide an estimate of flow focusing factors (FFFs) that (1) bridge the gap between the mountain-scale and drift-scale models, and (2) account for variability in local percolation flux due to

  18. Horizons of description: Black holes and complementarity

    Science.gov (United States)

    Bokulich, Peter Joshua Martin

    Niels Bohr famously argued that a consistent understanding of quantum mechanics requires a new epistemic framework, which he named complementarity . This position asserts that even in the context of quantum theory, classical concepts must be used to understand and communicate measurement results. The apparent conflict between certain classical descriptions is avoided by recognizing that their application now crucially depends on the measurement context. Recently it has been argued that a new form of complementarity can provide a solution to the so-called information loss paradox. Stephen Hawking argues that the evolution of black holes cannot be described by standard unitary quantum evolution, because such evolution always preserves information, while the evaporation of a black hole will imply that any information that fell into it is irrevocably lost---hence a "paradox." Some researchers in quantum gravity have argued that this paradox can be resolved if one interprets certain seemingly incompatible descriptions of events around black holes as instead being complementary. In this dissertation I assess the extent to which this black hole complementarity can be undergirded by Bohr's account of the limitations of classical concepts. I begin by offering an interpretation of Bohr's complementarity and the role that it plays in his philosophy of quantum theory. After clarifying the nature of classical concepts, I offer an account of the limitations these concepts face, and argue that Bohr's appeal to disturbance is best understood as referring to these conceptual limits. Following preparatory chapters on issues in quantum field theory and black hole mechanics, I offer an analysis of the information loss paradox and various responses to it. I consider the three most prominent accounts of black hole complementarity and argue that they fail to offer sufficient justification for the proposed incompatibility between descriptions. The lesson that emerges from this

  19. Illicit operation of industrial plant subject to licensing, or of other installations within the purview of the German Federal Emission Control Act (BImSchG), which have been shut down for protection against hazards (section 327, subsection 2, No. 1 Penal Code (StGB)); Das unerlaubte Betreiben von genehmigungsbeduerftigen Anlagen oder sonstigen Anlagen im Sinne des Bundes-Immissionsschutzgesetzes, deren Betrieb zum Schutz vor Gefahren untersagt worden ist (Paragraph 327 Abs.2 Nr.1 StGB)

    Energy Technology Data Exchange (ETDEWEB)

    Ocker, A.

    1995-12-31

    The 18th act of 28 March 1980 for amendment of the German Criminal Code (StGB) incorporated the provisions governing the criminal offence of illicit operation of installations subject to licensing into the StGB. These provisions have until then been forming part of the BImSchG (Federal Act on Emission Control). The study in hand presents a discussion of section 327, subsection 2, No. 1 StGB, because this provision represents a fundamental type of an administration accessory criminal offence and thus is suitable to be taken as a basis for an analysis of the scope of problems covered by the StGB, but having an effect on and being interlaced with offences governed by other acts and legal provisions. The study addresses inter alia items such as the object of legal protection defined by this section of the StGB, the provisions defining the licensability of a non-licensed installation in operation, and the consequences of defective decisions under administrative law on the applicability of criminal law provisions. The specific aspects of section 327 StGB, which are of a dominantly administrative nature, are discussed, in particular those referring to the definition of the term ``industrial installation`` as defined by the BImSchG. [Deutsch] Durch das 18. Strafrechtsaenderungsgesetz vom 28.3.1980 wurde der Straftatbestand des unerlaubten Betreibens von Anlagen, die einer Genehmigung nach dem Bundesimmissionsschutzgesetz beduerfen, aus dem BImSchG in das Kernstrafrecht ueberfuehrt. Die vorliegende Untersuchung versucht eine eingehendere Auseinandersetzung mit Para. 327 Abs. 2 Nr. 1 StGB, weil diese Vorschrift als ein Grundtypus der verwaltungsakzessorischen Straftatbestaende die Gelegenheiit zur vertieften Diskussion von umfassenderen strafrechtlichen Problemkreisen gibt. Angesprochen sind insoweit vor allem die Frage des geschuetzten Rechtsgutes der Norm, der Behandlung der materiellen Genehmigungsfaehigkeit eines ungenehmigten Anlagenbetriebs sowie der Auswirkungen von

  20. Geoscience Australia Publishes Sample Descriptions using W3C standards

    Science.gov (United States)

    Car, N. J.; Cox, S. J. D.; Bastrakova, I.; Wyborn, L. A.

    2017-12-01

    The recent revision of the W3C Semantic Sensor Network Ontology (SSN) has focused on three key concerns: Extending the scope of the ontology to include sampling and actuation as well as observation and sensing Modularizing the ontology into a simple core with few classes and properties and little formal axiomatization, supplemented by additional modules that formalize the semantics and extend the scope Alignments with several existing applications and upper ontologies These enhancements mean that SSN can now be used as the basis for publishing descriptions of geologic samples as Linked Data. Geoscience Australia maintains a database of about three million samples, collected over 50 years through projects from ocean core, terrestrial rock and hydrochemistry borehole projects, almost all of which are held in in the special-purpose GA samples repository. Access to descriptions of these samples as Linked Data has recently been enabled. The sample descriptions can be viewed in various machine-readable formalizations, including IGSN (XML & RDF), Dublin Core (XML & RDF) and SSN (RDF), as well as web landing-pages for people. Of particular importance is the support for encoding relationships between samples, and between samples and surveys, boreholes, and traverses which they are related to, as well as between samples processed for analytical purposes and their parents, siblings, and back to the original field samples. The SSN extension for Sample Relationships provides an extensible, semantically rich mechanism to capture any relationship necessary to explain the provenance of observation results obtained from samples. Sample citation is facilitated through the use of URI-based persistent identifiers which resolve to samples' landing pages. The sample system also allows PROV pingbacks to be received for samples when users of them record provenance for their actions.

  1. A consistent response spectrum analysis including the resonance range

    International Nuclear Information System (INIS)

    Schmitz, D.; Simmchen, A.

    1983-01-01

    The report provides a complete consistent Response Spectrum Analysis for any component. The effect of supports with different excitation is taken into consideration, at is the description of the resonance ranges. It includes information explaining how the contributions of the eigenforms with higher eigenfrequencies are to be considered. Stocking of floor response spectra is also possible using the method described here. However, modified floor response spectra must now be calculated for each building mode. Once these have been prepared, the calculation of the dynamic component values is practically no more complicated than with the conventional, non-consistent methods. The consistent Response Spectrum Analysis can supply smaller and larger values than the conventional theory, a fact which can be demonstrated using simple examples. The report contains a consistent Response Spectrum Analysis (RSA), which, as far as we know, has been formulated in this way for the first time. A consistent RSA is so important because today this method is preferentially applied as an important tool for the earthquake proof of components in nuclear power plants. (orig./HP)

  2. Design description of the Tangaye Village photovoltaic power system

    Science.gov (United States)

    Martz, J. E.; Ratajczak, A. F.

    1982-01-01

    The engineering design of a stand alone photovoltaic (PV) powered grain mill and water pump for the village of Tangaye, Upper Volta is described. The socioeconomic effects of reducing the time required by women in rural areas for drawing water and grinding grain were studied. The suitability of photovoltaic technology for use in rural areas by people of limited technical training was demonstrated. The PV system consists of a 1.8-kW (peak) solar cell array, 540 ampere hours of battery storage, instrumentation, automatic controls, and a data collection and storage system. The PV system is situated near an improved village well and supplies d.c. power to a grain mill and a water pump. The array is located in a fenced area and the mill, battery, instruments, controls, and data system are in a mill building. A water storage tank is located near the well. The system employs automatic controls which provide battery charge regulation and system over and under voltage protection. This report includes descriptions of the engineering design of the system and of the load that it serves; a discussion of PV array and battery sizing methodology; descriptions of the mechanical and electrical designs including the array, battery, controls, and instrumentation; and a discussion of the safety features. The system became operational on March 1, 1979.

  3. Water Resources Research Grant Program project descriptions, fiscal year 1987

    Science.gov (United States)

    ,

    1987-01-01

    This report contains information on the 34 new projects funded by the United States Geological Survey 's Water Resources Research Grant Program in fiscal year 1987 and on 3 projects completed during the year. For the new projects, the report gives the grant number, project title, performing organization, principal investigator(s), and a project description that includes: (1) identification of water related problems and problem-solution approach (2) contribution to problem solution, (3) objectives, and (4) approach. The 34 projects include 12 in the area of groundwater quality problems, 12 in the science and technology of water quality management, 1 in climate variability and the hydrologic cycle, 4 in institutional change in water resources management, and 5 in surface water management. For the three completed projects, the report furnishes the grant number; project title; performing organization; principal investor(s); starting data; data of receipt of final report; and an abstract of the final report. Each project description provides the information needed to obtain a copy of the final report. The report contains tables showing: (1) proposals received according to area of research interest, (2) grant awards and funding according to area of research interest, (3) proposals received according to type of submitting organization, and (4) awards and funding according to type of organization. (Author 's abstract)

  4. Characteristics of Qualitative Descriptive Studies: A Systematic Review.

    Science.gov (United States)

    Kim, Hyejin; Sefcik, Justine S; Bradway, Christine

    2017-02-01

    Qualitative description (QD) is a term that is widely used to describe qualitative studies of health care and nursing-related phenomena. However, limited discussions regarding QD are found in the existing literature. In this systematic review, we identified characteristics of methods and findings reported in research articles published in 2014 whose authors identified the work as QD. After searching and screening, data were extracted from the sample of 55 QD articles and examined to characterize research objectives, design justification, theoretical/philosophical frameworks, sampling and sample size, data collection and sources, data analysis, and presentation of findings. In this review, three primary findings were identified. First, although there were some inconsistencies, most articles included characteristics consistent with the limited available QD definitions and descriptions. Next, flexibility or variability of methods was common and effective for obtaining rich data and achieving understanding of a phenomenon. Finally, justification for how a QD approach was chosen and why it would be an appropriate fit for a particular study was limited in the sample and, therefore, in need of increased attention. Based on these findings, recommendations include encouragement to researchers to provide as many details as possible regarding the methods of their QD studies so that readers can determine whether the methods used were reasonable and effective in producing useful findings. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  5. THE SHEFFIELD ALCOHOL POLICY MODEL - A MATHEMATICAL DESCRIPTION.

    Science.gov (United States)

    Brennan, Alan; Meier, Petra; Purshouse, Robin; Rafia, Rachid; Meng, Yang; Hill-Macmanus, Daniel; Angus, Colin; Holmes, John

    2014-09-30

    This methodology paper sets out a mathematical description of the Sheffield Alcohol Policy Model version 2.0, a model to evaluate public health strategies for alcohol harm reduction in the UK. Policies that can be appraised include a minimum price per unit of alcohol, restrictions on price discounting, and broader public health measures. The model estimates the impact on consumers, health services, crime, employers, retailers and government tax revenues. The synthesis of public and commercial data sources to inform the model structure is described. A detailed algebraic description of the model is provided. This involves quantifying baseline levels of alcohol purchasing and consumption by age and gender subgroups, estimating the impact of policies on consumption, for example, using evidence on price elasticities of demand for alcohol, quantification of risk functions relating alcohol consumption to harms including 47 health conditions, crimes, absenteeism and unemployment, and finally monetary valuation of the consequences. The results framework, shown for a minimum price per unit of alcohol, has been used to provide policy appraisals for the UK government policy-makers. In discussion and online appendix, we explore issues around valuation and scope, limitations of evidence/data, how the framework can be adapted to other countries and decisions, and ongoing plans for further development. © 2014 The Authors. Health Economics published by John Wiley & Sons Ltd. © 2014 The Authors. Health Economics published by John Wiley & Sons Ltd.

  6. Quality assurance program description: Hanford Waste Vitrification Plant, Part 1

    International Nuclear Information System (INIS)

    1992-01-01

    This document describes the Department of Energy's Richland Field Office (DOE-RL) quality assurance (QA) program for the processing of high-level waste as well as the Vitrification Project Quality Assurance Program for the design and construction of the Hanford Waste Vitrification Plant (HWVP). It also identifies and describes the planned activities that constitute the required quality assurance program for the HWVP. This program applies to the broad scope of quality-affecting activities associated with the overall HWVP Facility. Quality-affecting activities include designing, purchasing, fabricating, handling, shipping, storing, cleaning, erecting, installing, inspecting, testing, maintaining, repairing, and modifying. Also included are the development, qualification, and production of waste forms which may be safely used to dispose of high-level radioactive waste resulting from national defense activities. The HWVP QA program is made up of many constituent programs that are being implemented by the participating organizations. This Quality Assurance program description is intended to outline and define the scope and application of the major programs that make up the HWVP QA program. It provides a means by which the overall program can be managed and directed to achieve its objectives. Subsequent parts of this description will identify the program's objectives, its scope, application, and structure

  7. Ecosystem history of South Florida; Biscayne Bay sediment core descriptions

    Science.gov (United States)

    Ishman, S.E.

    1997-01-01

    The 'Ecosystem History of Biscayne Bay and the southeast Coast' project of the U.S. Geological Survey is part of a multi-disciplinary effort that includes Florida Bay and the Everglades to provide paleoecologic reconstructions for the south Florida region. Reconstructions of past salinity, nutrients, substrate, and water quality are needed to determine ecosystem variability due to both natural and human-induced causes. Our understanding of the relations between the south Florida ecosystem and introduced forces will allow managers to make informed decisions regarding the south Florida ecosystem restoration and monitoring. The record of past ecosystem conditions can be found in shallow sediment cores. This U.S. Geological Survey Open-File Report describes six shallow sediment cores collected from Biscayne Bay. The cores described herein are being processed for a variety of analytical procedures, and this provides the descriptive framework for future analyses of the included cores. This report is preliminary and has not been reviewed for conformity with U.S. Geological Survey editorial standards or with the North American Stratigraphic Code. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government.

  8. Confidence assessment. Site-descriptive modelling SDM-Site Laxemar

    International Nuclear Information System (INIS)

    2009-06-01

    The objective of this report is to assess the confidence that can be placed in the Laxemar site descriptive model, based on the information available at the conclusion of the surface-based investigations (SDM-Site Laxemar). In this exploration, an overriding question is whether remaining uncertainties are significant for repository engineering design or long-term safety assessment and could successfully be further reduced by more surface-based investigations or more usefully by explorations underground made during construction of the repository. Procedures for this assessment have been progressively refined during the course of the site descriptive modelling, and applied to all previous versions of the Forsmark and Laxemar site descriptive models. They include assessment of whether all relevant data have been considered and understood, identification of the main uncertainties and their causes, possible alternative models and their handling, and consistency between disciplines. The assessment then forms the basis for an overall confidence statement. The confidence in the Laxemar site descriptive model, based on the data available at the conclusion of the surface based site investigations, has been assessed by exploring: - Confidence in the site characterization data base, - remaining issues and their handling, - handling of alternatives, - consistency between disciplines and - main reasons for confidence and lack of confidence in the model. Generally, the site investigation database is of high quality, as assured by the quality procedures applied. It is judged that the Laxemar site descriptive model has an overall high level of confidence. Because of the relatively robust geological model that describes the site, the overall confidence in the Laxemar Site Descriptive model is judged to be high, even though details of the spatial variability remain unknown. The overall reason for this confidence is the wide spatial distribution of the data and the consistency between

  9. Confidence assessment. Site-descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    2008-12-15

    The objective of this report is to assess the confidence that can be placed in the Laxemar site descriptive model, based on the information available at the conclusion of the surface-based investigations (SDM-Site Laxemar). In this exploration, an overriding question is whether remaining uncertainties are significant for repository engineering design or long-term safety assessment and could successfully be further reduced by more surface-based investigations or more usefully by explorations underground made during construction of the repository. Procedures for this assessment have been progressively refined during the course of the site descriptive modelling, and applied to all previous versions of the Forsmark and Laxemar site descriptive models. They include assessment of whether all relevant data have been considered and understood, identification of the main uncertainties and their causes, possible alternative models and their handling, and consistency between disciplines. The assessment then forms the basis for an overall confidence statement. The confidence in the Laxemar site descriptive model, based on the data available at the conclusion of the surface based site investigations, has been assessed by exploring: - Confidence in the site characterization data base, - remaining issues and their handling, - handling of alternatives, - consistency between disciplines and - main reasons for confidence and lack of confidence in the model. Generally, the site investigation database is of high quality, as assured by the quality procedures applied. It is judged that the Laxemar site descriptive model has an overall high level of confidence. Because of the relatively robust geological model that describes the site, the overall confidence in the Laxemar Site Descriptive model is judged to be high, even though details of the spatial variability remain unknown. The overall reason for this confidence is the wide spatial distribution of the data and the consistency between

  10. Translation of a High-Level Temporal Model into Lower Level Models: Impact of Modelling at Different Description Levels

    DEFF Research Database (Denmark)

    Kraft, Peter; Sørensen, Jens Otto

    2001-01-01

    The paper attempts theoretically to clarify the interrelation between various levels of descriptions used in the modelling and the programming of information systems. We suggest an analysis where we characterise the description levels with respect to how precisely they may handle information abou...... and other textual models. We also consider the aptness of models that include procedural mechanisms such as active and object databases...

  11. Quantum Description of Optical Devices Used in Interferometry

    Directory of Open Access Journals (Sweden)

    P. Kucera

    2007-09-01

    Full Text Available A quantum-mechanical description of the phase shifters, retarders, mirrors and beam splitters is given in the paper. The description is then applied on two types of states. On a coherent state, a classical-like state, and on a number state, hence the strict quantum state. The quantum description of a beam splitter can be found in the literature. However the description does not treat with the polarization concept. The paper is aimed to introduce quantum description of an arbitrary oriented retarder and give a description of a beam splitter which treats with the polarization.

  12. RSYST: short description of the modules

    International Nuclear Information System (INIS)

    Ruehle, R.

    Since 1969, the modular system RSYST has been used for reactor and shielding calculations. A data base managed by a central program, data blocks containing structure descriptions, and hierarchical linking of data blocks enable flexible management of all data. Module sequences are formulated using a user command language. The language features logical branches, variables and arithmetic expressions. Sections of the user language may be stored in the data base and activated at any time. Presently, an interactive version of the system is developed. It supports basic operations and interactive input checking on a front end computer

  13. PARR-2: reactor description and experiments

    International Nuclear Information System (INIS)

    Wyne, M.F.; Meghji, J.H.

    1990-12-01

    PARR-2 is a miniature neutron source reactor (MNSR) research reactor has been designed at the rate of 27 kW. Reactor assembly comprises of peaking characteristics with a self limiting flux. In this report reactor description with its assembly and instrumentation control system has been explained. The reactor engineering and physics experiments which can be performed on this reactor are explained in this report. PARR-2 is fueled with HEU fuel pins which are about 90% enriched in U-235. Specific requirements for the safety of the reactor, its building and the personnel, normal instrumentation as required in an industrial environment is sufficient. (A.B.)

  14. LCDD: A complete detector description package

    Energy Technology Data Exchange (ETDEWEB)

    Graf, Norman, E-mail: Norman.Graf@slac.stanford.edu; McCormick, Jeremy, E-mail: Jeremy.McCormick@slac.stanford.edu

    2015-07-21

    LCDD has been developed to provide a complete detector description package for physics detector simulations using Geant4. All aspects of the experimental setup, such as the physical geometry, magnetic fields, and sensitive detector readouts, as well as control of the physics simulations, such as physics processes, interaction models and kinematic limits, are defined at runtime. Users are therefore able to concentrate on the design of the detector system without having to master the intricacies of C++ programming or being proficient in setting up their own Geant4 application. We describe both the XML-based file format and the processors which communicate this information to the underlying Geant4 simulation toolkit.

  15. The athena data dictionary and description language

    International Nuclear Information System (INIS)

    Bazan, A.; Ghez, P.; Le Flour, T.; Lieunard, S.; Tull, C.

    2001-01-01

    The authors have developed a data object description tool suite and service for Athena consisting of: a language grammar based upon an extended proper subset of IDL 2.0, a compiler front end based upon this language grammar, JavaCC, and a Java Reflection API-like interface, and several compiler back ends which meet specific needs in ATLAS such as automatic generation of object converters, and data object scripting interfaces. The authors present here details of the work and experience to date on the Athena Definition Language and Athena Data Dictionary

  16. Chinese legal texts – Quantitative Description

    Directory of Open Access Journals (Sweden)

    Ľuboš GAJDOŠ

    2017-06-01

    Full Text Available The aim of the paper is to provide a quantitative description of legal Chinese. This study adopts the approach of corpus-based analyses and it shows basic statistical parameters of legal texts in Chinese, namely the length of a sentence, the proportion of part of speech etc. The research is conducted on the Chinese monolingual corpus Hanku. The paper also discusses the issues of statistical data processing from various corpora, e.g. the tokenisation and part of speech tagging and their relevance to study of registers variation.

  17. Hamiltonian description of the ideal fluid

    International Nuclear Information System (INIS)

    Morrison, P.J.

    1994-01-01

    Fluid mechanics is examined from a Hamiltonian perspective. The Hamiltonian point of view provides a unifying framework; by understanding the Hamiltonian perspective, one knows in advance (within bounds) what answers to expect and what kinds of procedures can be performed. The material is organized into five lectures, on the following topics: rudiments of few-degree-of-freedom Hamiltonian systems illustrated by passive advection in two-dimensional fluids; functional differentiation, two action principles of mechanics, and the action principle and canonical Hamiltonian description of the ideal fluid; noncanonical Hamiltonian dynamics with examples; tutorial on Lie groups and algebras, reduction-realization, and Clebsch variables; and stability and Hamiltonian systems

  18. Modelling Imprecise Arguments in Description Logic

    Directory of Open Access Journals (Sweden)

    LETIA, I. A.

    2009-10-01

    Full Text Available Real arguments are a mixture of fuzzy linguistic variables and ontological knowledge. This paper focuses on modelling imprecise arguments in order to obtain a better interleaving of human and software agents argumentation, which might be proved useful for extending the number of real life argumentative-based applications. We propose Fuzzy Description Logic as the adequate technical instrumentation for filling the gap between human arguments and software agents arguments. A proof of concept scenario has been tested with the fuzzyDL reasoner.

  19. System design description PFP thermal stabilization

    International Nuclear Information System (INIS)

    RISENMAY, H.R.

    1998-01-01

    The purpose of this document is to provide a system design description and design basis for the Plutonium Finishing P1ant (PFP) Thermal Stabilization project. The sources of material for this project are residues scraped from glovebox floors and materials already stored in vault storage that need further stabilizing to meet the 3013 storage requirements. Stabilizing this material will promote long term storage and reduced worker exposure. This document addresses: function design, equipment, and safety requirements for thermal stabilization of plutonium residues and oxides

  20. Description of the Nuclear Training Centre

    International Nuclear Information System (INIS)

    Wagadarikar, V.K.

    1974-01-01

    The Department of Atomic Energy, Government of India has developed an on-going programme for constructing and operating heavy water moderated, natural uranium fuelled power stations of the CANDU-type. With the view to train personnel required for operation and maintenance of these stations, a Nuclear Training Centre has been set up at the site of the Rajasthan Atomic Power Station. A description of the nuclear training centre with its facilities is given. The training programme for engineers, operators, mechanical, electrical and control maintainers etc. is given in detail, along with the actual syllabi for respective courses. Examples of the typical field check list are provided. (K.B.)

  1. Description, Modelling and Design of Production Systems

    DEFF Research Database (Denmark)

    Jacobsen, Peter; Rudolph, Carsten

    1997-01-01

    Design of production systems are rarely an activity in which decision makers in most production companies have much experience. In future, this activity is to be more recurrent due to more and more frequent changes in the production task. Consequently, the decision makers are in need of better...... management tools and methods for description and modelling of production systems supporting the decisions. In this article a structural framework to describe and model production systems will be introduced, and it is shown how the production system of a minor Danish manufacturer of electromechanical...

  2. Theoretical Description of the Fission Process

    International Nuclear Information System (INIS)

    Witold Nazarewicz

    2003-01-01

    The main goals of the project can be summarized as follows: Development of effective energy functionals that are appropriate for the description of heavy nuclei. Our goal is to improve the existing energy density (Skyrme) functionals to develop a force that will be used in calculations of fission dynamics. Systematic self-consistent calculations of binding energies and fission barriers of actinide and trans-actinide nuclei using modern density functionals. This will be followed by calculations of spontaneous fission lifetimes and mass and charge divisions using dynamic adiabatic approaches based on the WKB approximation. Investigate novel microscopic (non-adiabatic) methods to study the fission process

  3. Research team training: moving beyond job descriptions.

    Science.gov (United States)

    Nelson, LaRon E; Morrison-Beedy, Dianne

    2008-08-01

    Providing appropriate training to research team members is essential to the effective implementation and overall operation of a research project. It is important to identify job requirements beyond those listed in the job description in order to fully assess basic and supplementary training needs. Training needs should be identified prior to and during the conduct of the study. Methods for delivering the training must also be identified. This article describes the identification of training needs and methods in the design of a research team training program using examples from an HIV prevention intervention trial with adolescent girls.

  4. Theoretical Description of the Fission Process

    Energy Technology Data Exchange (ETDEWEB)

    Witold Nazarewicz

    2003-07-01

    The main goals of the project can be summarized as follows: Development of effective energy functionals that are appropriate for the description of heavy nuclei. Our goal is to improve the existing energy density (Skyrme) functionals to develop a force that will be used in calculations of fission dynamics. Systematic self-consistent calculations of binding energies and fission barriers of actinide and trans-actinide nuclei using modern density functionals. This will be followed by calculations of spontaneous fission lifetimes and mass and charge divisions using dynamic adiabatic approaches based on the WKB approximation. Investigate novel microscopic (non-adiabatic) methods to study the fission process.

  5. Multiple descriptions for packetized predictive control

    DEFF Research Database (Denmark)

    Østergaard, Jan; Quevedo, Daniel

    2016-01-01

    be reliably reconstructed at the plant side. For the particular case of LTI plant models and i.i.d. channels, we show that the overall system forms a Markov jump linear system. We provide conditions for mean square stability and derive upper bounds on the operational bit rate of the quantizer to guarantee......In this paper, we propose to use multiple descriptions (MDs) to achieve a high degree of robustness towards random packet delays and erasures in networked control systems. In particular, we consider the scenario, where a data-rate limited channel is located between the controller and the plant...

  6. Mathematical description and program documentation for CLASSY, an adaptive maximum likelihood clustering method

    Science.gov (United States)

    Lennington, R. K.; Rassbach, M. E.

    1979-01-01

    Discussed in this report is the clustering algorithm CLASSY, including detailed descriptions of its general structure and mathematical background and of the various major subroutines. The report provides a development of the logic and equations used with specific reference to program variables. Some comments on timing and proposed optimization techniques are included.

  7. Robotics/Automated Systems Task Analysis and Description of Required Job Competencies Report. Task Analysis and Description of Required Job Competencies of Robotics/Automated Systems Technicians.

    Science.gov (United States)

    Hull, Daniel M.; Lovett, James E.

    This task analysis report for the Robotics/Automated Systems Technician (RAST) curriculum project first provides a RAST job description. It then discusses the task analysis, including the identification of tasks, the grouping of tasks according to major areas of specialty, and the comparison of the competencies to existing or new courses to…

  8. Using bio.tools to generate and annotate workbench tool descriptions [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Kenzo-Hugo Hillion

    2017-11-01

    Full Text Available Workbench and workflow systems such as Galaxy, Taverna, Chipster, or Common Workflow Language (CWL-based frameworks, facilitate the access to bioinformatics tools in a user-friendly, scalable and reproducible way. Still, the integration of tools in such environments remains a cumbersome, time consuming and error-prone process. A major consequence is the incomplete or outdated description of tools that are often missing important information, including parameters and metadata such as publication or links to documentation. ToolDog (Tool DescriptiOn Generator facilitates the integration of tools - which have been registered in the ELIXIR tools registry (https://bio.tools - into workbench environments by generating tool description templates. ToolDog includes two modules. The first module analyses the source code of the bioinformatics software with language-specific plugins, and generates a skeleton for a Galaxy XML or CWL tool description. The second module is dedicated to the enrichment of the generated tool description, using metadata provided by bio.tools. This last module can also be used on its own to complete or correct existing tool descriptions with missing metadata.

  9. An accurate analytic description of neutrino oscillations in matter

    Science.gov (United States)

    Akhmedov, E. Kh.; Niro, Viviana

    2008-12-01

    A simple closed-form analytic expression for the probability of two-flavour neutrino oscillations in a matter with an arbitrary density profile is derived. Our formula is based on a perturbative expansion and allows an easy calculation of higher order corrections. The expansion parameter is small when the density changes relatively slowly along the neutrino path and/or neutrino energy is not very close to the Mikheyev-Smirnov-Wolfenstein (MSW) resonance energy. Our approximation is not equivalent to the adiabatic approximation and actually goes beyond it. We demonstrate the validity of our results using a few model density profiles, including the PREM density profile of the Earth. It is shown that by combining the results obtained from the expansions valid below and above the MSW resonance one can obtain a very good description of neutrino oscillations in matter in the entire energy range, including the resonance region.

  10. Analysis of laparoscopic port site complications: A descriptive study

    Directory of Open Access Journals (Sweden)

    Somu Karthik

    2013-01-01

    Full Text Available Context: The rate of port site complications following conventional laparoscopic surgery is about 21 per 100,000 cases. It has shown a proportional rise with increase in the size of the port site incision and trocar. Although rare, complications that occur at the port site include infection, bleeding, and port site hernia. Aims: To determine the morbidity associated with ports at the site of their insertion in laparoscopic surgery and to identify risk factors for complications. Settings and Design: Prospective descriptive study. Materials and Methods: In the present descriptive study, a total of 570 patients who underwent laparoscopic surgeries for various ailments between August 2009 and July 2011 at our institute were observed for port site complications prospectively and the complications were reviewed. Statistical Analysis Used: Descriptive statistical analysis was carried out in the present study. The statistical software, namely, SPSS 15.0 was used for the analysis of the data. Results: Of the 570 patients undergoing laparoscopic surgery, 17 (3% had developed complications specifically related to the port site during a minimum follow-up of three months; port site infection (PSI was the most frequent (n = 10, 1.8%, followed by port site bleeding (n = 4, 0.7%, omentum-related complications (n = 2; 0.35%, and port site metastasis (n = 1, 0.175%. Conclusions: Laparoscopic surgeries are associated with minimal port site complications. Complications are related to the increased number of ports. Umbilical port involvement is the commonest. Most complications are manageable with minimal morbidity, and can be further minimized with meticulous surgical technique during entry and exit.

  11. Analysis of laparoscopic port site complications: A descriptive study

    Science.gov (United States)

    Karthik, Somu; Augustine, Alfred Joseph; Shibumon, Mundunadackal Madhavan; Pai, Manohar Varadaraya

    2013-01-01

    CONTEXT: The rate of port site complications following conventional laparoscopic surgery is about 21 per 100,000 cases. It has shown a proportional rise with increase in the size of the port site incision and trocar. Although rare, complications that occur at the port site include infection, bleeding, and port site hernia. AIMS: To determine the morbidity associated with ports at the site of their insertion in laparoscopic surgery and to identify risk factors for complications. SETTINGS AND DESIGN: Prospective descriptive study. MATERIALS AND METHODS: In the present descriptive study, a total of 570 patients who underwent laparoscopic surgeries for various ailments between August 2009 and July 2011 at our institute were observed for port site complications prospectively and the complications were reviewed. STATISTICAL ANALYSIS USED: Descriptive statistical analysis was carried out in the present study. The statistical software, namely, SPSS 15.0 was used for the analysis of the data. RESULTS: Of the 570 patients undergoing laparoscopic surgery, 17 (3%) had developed complications specifically related to the port site during a minimum follow-up of three months; port site infection (PSI) was the most frequent (n = 10, 1.8%), followed by port site bleeding (n = 4, 0.7%), omentum-related complications (n = 2; 0.35%), and port site metastasis (n = 1, 0.175%). CONCLUSIONS: Laparoscopic surgeries are associated with minimal port site complications. Complications are related to the increased number of ports. Umbilical port involvement is the commonest. Most complications are manageable with minimal morbidity, and can be further minimized with meticulous surgical technique during entry and exit. PMID:23741110

  12. Optimization of neural network algorithm of the land market description

    Directory of Open Access Journals (Sweden)

    M. A. Karpovich

    2016-01-01

    Full Text Available The advantages of neural network technology is shown in comparison of traditional descriptions of dynamically changing systems, which include a modern land market. The basic difficulty arising in the practical implementation of neural network models of the land market and construction products is revealed It is the formation of a representative set of training and test examples. The requirements which are necessary for the correct description of the current economic situation has been determined, it consists in the fact that Train-paid-set in the feature space should not has the ranges with a low density of observations. The methods of optimization of empirical array, which allow to avoid the long-range extrapolation of data from range of concentration of the set of examples are formulated. It is shown that a radical method of optimization a set of training and test examples enclosing to collect supplemantary information, is associated with significant costs time and resources for the economic problems and the ratio of cost / efficiency is less efficient than an algorithm optimization neural network models the earth market fixed set of empirical data. Algorithm of optimization based on the transformation of arrays of information which represents the expansion of the ranges of concentration of the set of examples and compression the ranges of low density of observations is analyzed in details. The significant reduction in the relative error of land price description is demonstrated on the specific example of Voronezh region market of lands which intend for road construction, it makes the using of radical method of empirical optimization of the array costeffective with accounting the significant absolute value of the land. The high economic efficiency of the proposed algorithms is demonstrated.

  13. Quantum gravity from descriptive set theory

    International Nuclear Information System (INIS)

    El Naschie, M.S.

    2004-01-01

    We start from Hilbert's criticism of the axioms of classical geometry and the possibility of abandoning the Archimedean axiom. Subsequently we proceed to the physical possibility of a fundamental limitation on the smallest length connected to certain singular points in spacetime and below which measurements become meaningless, Finally we arrive at the conclusion that maximising the Hawking-Bekenstein informational content of spacetime makes the existence of a transfinite geometry for physical 'spacetime' not only plausible but probably inevitable. The main part of the paper is then concerned with a proposal for a mathematical description of a transfinite, non-Archimedean geometry using descriptive set theory. Nevertheless, and despite all abstract mathematics, we remain quite close to similar lines of investigation initiated by physicists like A. Wheeler, D. Finkelstein and G. 'tHooft. In particular we introduce a logarithmic gauge transformation linking classical gravity with the electro weak via a version of informational entropy. That way we may claim to have accomplished an important step towards a general theory of quantum gravity using ε (∞) and complexity theory and finding that α G =(2) α-bar ew -1 congruent with (1.7)(10) 38 where α G is the dimensionless Newton gravity constant, and α ew ≅128 is the fine structure constant at the electro weak scale

  14. The Athena data dictionary and description language

    International Nuclear Information System (INIS)

    Bazan, Alain; Bouedo, Thierry; Ghez, Philippe; Marino, Massimo; Tull, Craig

    2003-01-01

    Athena is the ATLAS off-line software framework, based upon the GAUDI architecture from LHCb. As part of ATLAS' continuing efforts to enhance and customize the architecture to meet our needs, we have developed a data object description tool suite and service for Athena. The aim is to provide a set of tools to describe, manage, integrate and use the Event Data Model at a design level according to the concepts of the Athena framework (use of patterns, relationships,...). Moreover, to ensure stability and reusability this must be fully independent from the implementation details. After an extensive investigation into the many options, we have developed a language grammar based upon a description language (IDL, ODL) to provide support for object integration in Athena. We have then developed a compiler front end based upon this language grammar, JavaCC, and a Java Reflection API-like interface. We have then used these tools to develop several compiler back ends which meet specific needs in ATLAS such as automatic generation of object converters, and data object scripting interfaces. We present here details of our work and experience to date on the Athena Definition Language and Athena Data Dictionary. (authors)

  15. The Athena Data Dictionary and Description Language

    CERN Document Server

    Bazan, A; Ghez, P; Marino, M; Tull, C

    2003-01-01

    Athena is the ATLAS off-line software framework, based upon the GAUDI architecture from LHCb. As part of ATLAS' continuing efforts to enhance and customise the architecture to meet our needs, we have developed a data object description tool suite and service for Athena. The aim is to provide a set of tools to describe, manage, integrate and use the Event Data Model at a design level according to the concepts of the Athena framework (use of patterns, relationships, ...). Moreover, to ensure stability and reusability this must be fully independent from the implementation details. After an extensive investigation into the many options, we have developed a language grammar based upon a description language (IDL, ODL) to provide support for object integration in Athena. We have then developed a compiler front end based upon this language grammar, JavaCC, and a Java Reflection API-like interface. We have then used these tools to develop several compiler back ends which meet specific needs in ATLAS such as automatic...

  16. Improved description of metal oxide stability

    DEFF Research Database (Denmark)

    Jauho, Thomas Stenbæk; Olsen, Thomas; Bligaard, Thomas

    2015-01-01

    The renormalized adiabatic PBE (rAPBE) method has recently been shown to comprise a significant improvement over the random phase approximation (RPA) for total energy calculations of simple solids and molecules. Here we consider the formation energies of 19 group I and II metal oxides and a few...... transition-metal oxides. The mean absolute error relative to experiments is 0.21 eV and 0.38 eV per oxygen atom for rAPBE and RPA, respectively, and thus the rAPBE method greatly improves the description of metal-oxygen bonds across a wide range of oxides. The failure of the RPA can be partly attributed...... to the lack of error cancellation between the correlation energy of the oxide on the one hand and the bulk metal and oxygen molecule on the other hand, which are all separately predicted much too negative by the RPA. We ascribe the improved performance of the rAPBE to its significantly better description...

  17. Initial rheological description of high performance concretes

    Directory of Open Access Journals (Sweden)

    Alessandra Lorenzetti de Castro

    2006-12-01

    Full Text Available Concrete is defined as a composite material and, in rheological terms, it can be understood as a concentrated suspension of solid particles (aggregates in a viscous liquid (cement paste. On a macroscopic scale, concrete flows as a liquid. It is known that the rheological behavior of the concrete is close to that of a Bingham fluid and two rheological parameters regarding its description are needed: yield stress and plastic viscosity. The aim of this paper is to present the initial rheological description of high performance concretes using the modified slump test. According to the results, an increase of yield stress was observed over time, while a slight variation in plastic viscosity was noticed. The incorporation of silica fume showed changes in the rheological properties of fresh concrete. The behavior of these materials also varied with the mixing procedure employed in their production. The addition of superplasticizer meant that there was a large reduction in the mixture's yield stress, while plastic viscosity remained practically constant.

  18. A theoretical description of inhomogeneous turbulence

    International Nuclear Information System (INIS)

    Turner, L.

    2000-01-01

    This is the final report of a three-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). In this LDRD, we have developed a highly compact and descriptive formalism that allows us to broach the theoretically formidable morass of inhomogeneous turbulence. Our formalism has two novel aspects: (a) an adaptation of helicity basis functions to represent an arbitrary incompressible channel flow and (b) the invocation of a hypothesis of random phase. A result of this compact formalism is that the mathematical description of inhomogeneous turbulence looks much like that of homogeneous turbulence--at the moment, the most rigorously explored terrain in turbulence research. As a result, we can explore the effect of boundaries on such important quantities as the gradients of mean flow, mean pressure, triple-velocity correlations and pressure velocity correlations, all of which vanish under the conventional, but artificial, assumption that the turbulence is statistically spatially uniform. Under suitable conditions, we have predicted that a mean flow gradient can develop even when none is initially present

  19. The appropriateness of XML for diagnostic description

    Energy Technology Data Exchange (ETDEWEB)

    Neto, A. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal)], E-mail: andre.neto@cfn.ist.utl.pt; Lister, J.B. [CRPP-EPFL, Association EURATOM-Confederation Suisse, 1015 Lausanne (Switzerland); Fernandes, H. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal); Yonekawa, I. [JAEA, Japan Atomic Energy Agency Naka (Japan); Varandas, C.A.F. [Associacao Euratom/IST, Centro de Fusao Nuclear, Av. Rovisco Pais, P-1049-001 Lisboa (Portugal)

    2007-10-15

    A standard for the self-description of fusion plasma diagnostics will be required in the near future. The motivation is to maintain and organize the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money. Since there is no existing standard to organize this kind of information, every EU Association stores and organizes each experiment in different ways. This can lead to severe problems when the particular organization schema is poorly documented. Standardization is the key to solve these problems. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalization (information at least in English and a local language). This problem will be met on the ITER project, for which a solution is essential. A strong candidate solution is the Extensible Markup Language (XML). In this paper, a review of the current status of XML related technologies will be presented.

  20. The appropriateness of XML for diagnostic description

    International Nuclear Information System (INIS)

    Neto, A.; Lister, J.B.; Fernandes, H.; Yonekawa, I.; Varandas, C.A.F.

    2007-01-01

    A standard for the self-description of fusion plasma diagnostics will be required in the near future. The motivation is to maintain and organize the information on all the components of a laboratory experiment, from the hardware to the access security, to save time and money. Since there is no existing standard to organize this kind of information, every EU Association stores and organizes each experiment in different ways. This can lead to severe problems when the particular organization schema is poorly documented. Standardization is the key to solve these problems. From the commercial information on the diagnostic (component supplier; component price) to the hardware description (component specifications; drawings) to the operation of the equipment (finite state machines) through change control (who changed what and when) and internationalization (information at least in English and a local language). This problem will be met on the ITER project, for which a solution is essential. A strong candidate solution is the Extensible Markup Language (XML). In this paper, a review of the current status of XML related technologies will be presented