WorldWideScience

Sample records for subscriber line dsl

  1. Transmission Delay Modeling of Packet Communication over Digital Subscriber Line

    Directory of Open Access Journals (Sweden)

    Jiri Vodrazka

    2013-01-01

    Full Text Available Certain multimedia and voice services, such as VoIP, IPTV, etc., are significantly delay sensitive and their performance is influenced by the overall transmission delay and its variance. One of the most common solutions used in access networks are xDSL lines, especially ADSL2+ or VDSL2. Although these subscriber lines also use packet communication, there are several differences and mechanisms, which influence their resulting delay. Their delay characteristics are also dependent on the individual settings of each xDSL provider, therefore we decided to investigate this area for typical commercially available lines in Czech Republic. Based on the measured values and experiments with real ADSL2+ lines we also developed a potential modeling method, which is presented in this article as well. The parameters for packet jitter based on the generalized Pareto distribution were modeled.

  2. Asymmetric Digital Subscriber Line (ADSL

    Directory of Open Access Journals (Sweden)

    Slavko Šarić

    2012-10-01

    Full Text Available ADSL (Asymmetric Digital Subscriber Line is a technologythat allows transmission at 8.488 Mbps over the existingtelephone copper line (speed range depending on the distance.ADSL circuit connects the ADSL modems by twisted-pairtelephone lines creating three infonnation channels: high speedsimplex (maximum 9 Mbps, medium speed duplex channel(maximum 2 Mbps and plain old telephone service channel.ADSL technology supports up to seven synchronous channelsthat can be configured to meet the needs of the end user.One could simultaneously view four movies stored in MPEG 1fonnat on separate television sets (MPEG 1 transmitted at 1.5Mbps, hold a video-conference (transmitted at 348 kbps,download data files from a server at 128 kbps via ISDN andeven receive a telephone call.

  3. Fundamentals of DSL technology

    CERN Document Server

    Golden, Philip; Jacobsen, Krista S

    2005-01-01

    Overview of the POTS Environment-Signals and CircuitsPhilip Golden and John CookThe Copper Channel-Loop Characteristics and Models Hervé DedieuNoise and Noise Modelling on the Twisted Pair ChannelRob H. KirkbyThe Twisted Pair Channel-Models and Channel Capacity Ragnar Hlynur JonssonIntroduction to DSL Edward JonesFundamentals of Single-Carrier Modulation Vladimir OksmanFundamentals of Multi-Carrier Modulation Krista S. JacobsenTrellis-Coded Modulation in DSL Systems Gottfried UngerboeckError Control Coding in DSL SystemsCory S. ModlinAdvanced Coding Techniques for Digital Subscriber Lines Evan

  4. Mathematical model of subscriber extension line

    OpenAIRE

    Petříková, Iva; Diviš, Zdeněk; Tesař, Zdeněk

    2012-01-01

    The paper focuses on measurement properties of metallic subscriber extension lines to build regression mathematical model for a symmetric pair cable. The regression model is compared with an analytical model based on a theoretical description of transfer parameters for this type of line. The output of the paper should demonstrate the impact of electromagnetic interference on the symmetric pair. The paper also describes the method to identify the interference sources and ...

  5. Selective Iterative Waterfilling for Digital Subscriber Lines

    Directory of Open Access Journals (Sweden)

    Xu Yang

    2007-01-01

    Full Text Available This paper presents a high-performance, low-complexity, quasi-distributed dynamic spectrum management (DSM algorithm suitable for DSL systems. We analytically demonstrate that the rate degradation of the distributed iterative waterfilling (IW algorithm in near-far scenarios is caused by the insufficient utilization of all available frequency and power resources due to its nature of noncooperative game theoretic formulation. Inspired by this observation, we propose the selective IW (SIW algorithm that can considerably alleviate the performance degradation of IW by applying IW selectively to different groups of users over different frequency bands so that all the available resources can be fully utilized. For users, the proposed SIW algorithm needs at most times the complexity of the IW algorithm, and is much simpler than the centralized optimal spectrum balancing (OSB, while it can offer a rate performance much better than that of the IW and close to the maximum possible rate region computed by the OSB in realistic near-far DSL scenarios. Furthermore, its predominantly distributed structure makes it suitable for DSL implementation.

  6. Energy management of DSL systems: Experimental findings

    KAUST Repository

    Guenach, Mamoun

    2013-12-01

    We present a measurement study of the energy consumption of an operator-side digital subscriber line (DSL) board under various conditions of data rate and power spectral density, with and without vectoring. The results highlight practical opportunities and challenges for optimizing rate-power-stability tradeoffs in DSL access systems, complementing simulation-based studies focused on energy reduction through spectral optimization. We validate models for line board consumption that can be tied with line driver consumption based on the aggregate transmit power of each line, and demonstrate that near-optimal rate-power-stability tradeoffs can be obtained through external line management of data rate, Signal-to-Noise-Ratio margin and power spectral density parameters. © 2013 IEEE.

  7. Selection of Digital Subscriber Lines Ready for Next Generation Access

    Directory of Open Access Journals (Sweden)

    Petr Jares

    2015-01-01

    Full Text Available Nowadays, in the EU a lot of project concerning broadband access to the Internet for end users is being developed. The aim of those projects is to support the creation of access communication networks that can meet defined performance criteria for providing the broadband services. Such networks are in general called Next Generation Access. One of the first tasks is to identify appropriate transmission technologies that could meet the required performance criteria. For each transmission technology, it is necessary to carry out a detailed performance analysis of the transmission depending on certain transmission conditions. To perform a detailed analysis means to carry out modelling of transmission’s specific conditions for each technology. This article, specifically, discusses hybrid optical networks, which in conjunction with digital subscriber lines are one of the possible solutions for Next Generation Access. In the access network topology that combines copper and optical cables, it is necessary to optimize the mutual ratio of both infrastructure’s length. Therefore, the article also describes this issue that refers to a certain technology for the Next Generation Access. Specific performance criteria of transmission for access network in the Czech Republic are considered and the optimized location of the external node digital line access multiplexer is discussed.

  8. Alien Crosstalk Cancellation for Multipair Digital Subscriber Line Systems

    Directory of Open Access Journals (Sweden)

    Ginis George

    2006-01-01

    Full Text Available An overview of alien crosstalk cancellation for DSL systems with multiple pairs is here presented. It is shown that when a common crosstalk source affects the receivers of multiple pairs, the noise exhibits a certain correlation among the pairs. In a DMT system, the frequency-domain noise samples are most strongly correlated between pairs when they correspond to the same tone. Thus, noise decorrelation algorithms applied independently for each tone can provide significant performance enhancements. Three possible methods are described for noise decorrelation, one is suitable for two-sided coordination and two are suited for receiver coordination among the pairs. It is theoretically proven that the data-rate performance of these three methods is identical from the perspective of the sum rate over all pairs. Simulation results corresponding to an ADSL2+ two-pair system with a T1 disturber are presented to illustrate the noise correlation property and to indicate the potential performance benefits.

  9. VT DSL Systems 2006

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VT DSL Broadband System dataset (DSL2006) includes polygons depicting the extent of Vermont's DSL broadband system as of 12/31/2006. This data...

  10. VT DSL Systems 2007

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VT DSL Broadband System dataset (DSL2007) includes polygons depicting the extent of Vermont's DSL broadband system as of 12/31/2007. This data...

  11. A compressed sensing based method with support refinement for impulse noise cancelation in DSL

    KAUST Repository

    Quadeer, Ahmed Abdul

    2013-06-01

    This paper presents a compressed sensing based method to suppress impulse noise in digital subscriber line (DSL). The proposed algorithm exploits the sparse nature of the impulse noise and utilizes the carriers, already available in all practical DSL systems, for its estimation and cancelation. Specifically, compressed sensing is used for a coarse estimate of the impulse position, an a priori information based maximum aposteriori probability (MAP) metric for its refinement, followed by least squares (LS) or minimum mean square error (MMSE) estimation for estimating the impulse amplitudes. Simulation results show that the proposed scheme achieves higher rate as compared to other known sparse estimation algorithms in literature. The paper also demonstrates the superior performance of the proposed scheme compared to the ITU-T G992.3 standard that utilizes RS-coding for impulse noise refinement in DSL signals. © 2013 IEEE.

  12. Video over DSL with LDGM Codes for Interactive Applications

    Directory of Open Access Journals (Sweden)

    Laith Al-Jobouri

    2016-05-01

    Full Text Available Digital Subscriber Line (DSL network access is subject to error bursts, which, for interactive video, can introduce unacceptable latencies if video packets need to be re-sent. If the video packets are protected against errors with Forward Error Correction (FEC, calculation of the application-layer channel codes themselves may also introduce additional latency. This paper proposes Low-Density Generator Matrix (LDGM codes rather than other popular codes because they are more suitable for interactive video streaming, not only for their computational simplicity but also for their licensing advantage. The paper demonstrates that a reduction of up to 4 dB in video distortion is achievable with LDGM Application Layer (AL FEC. In addition, an extension to the LDGM scheme is demonstrated, which works by rearranging the columns of the parity check matrix so as to make it even more resilient to burst errors. Telemedicine and video conferencing are typical target applications.

  13. Asymmetric DSL Technology of Signal Transmission

    Directory of Open Access Journals (Sweden)

    Dražen Kovačević

    2005-05-01

    Full Text Available Asymmetric flow of information is the key feature of theADSL (Asymmetric Digital Subscriber Loop technology, i.e.higher data transmission rate towards the user than from theuser towards the network. Characteristic is the short messagesending by the user with a certain request to the se!Ver. These!Ver responds to the request by a significantly longer messageof various electronic forms (data, digitized speech, pictures orvideo. Therefore, this technology is most often used by smalland medium users. ADSL is currently the only commerciallyavailable DSL technology which is still experiencing the breakthroughon the seiVice market. It enables faster access to theInternet, LAN (Local Area Network, videoconferencing, VoD(Video on Demand and interactive multimedia. In order tostandardize such se/Vices, the !TU (International TelecommunicationsUnion G. 992.1 (standardized DMT-discrete multi-tone line coding technology and ANSJ (American NationalStandards Institution Tl.413-95!98 are used for ADSL. DMT(Discrete Multi Tone, as the more popular one, uses the linecoding technique, which splits a certain frequency range intoseveral sub-channels. Most of these sub-channels are used forupstream and downstream transmission of speech and data,whereas some are used as pilot signals or kept in rese/Ve. Suchmodulation technique expands the frequency spectrum, allowingthe usage ofbroadband se/Vices per one pair of wires. In thisway the sharing of speech and data se/Vice transmission is realized.

  14. Cosine-Modulated Multitone for Very-High-Speed Digital Subscriber Lines

    Directory of Open Access Journals (Sweden)

    Lin Lekun

    2006-01-01

    Full Text Available In this paper, the use of cosine-modulated filter banks (CMFBs for multicarrier modulation in the application of very-high-speed digital subscriber lines (VDSLs is studied. We refer to this modulation technique as cosine-modulated multitone (CMT. CMT has the same transmitter structure as discrete wavelet multitone (DWMT. However, the receiver structure in CMT is different from its DWMT counterpart. DWMT uses linear combiner equalizers, which typically have more than 20 taps per subcarrier. CMT, on the other hand, adopts a receiver structure that uses only two taps per subcarrier for equalization. This paper has the following contributions. (i A modification that reduces the computational complexity of the receiver structure of CMT is proposed. (ii Although traditionally CMFBs are designed to satisfy perfect-reconstruction (PR property, in transmultiplexing applications, the presence of channel destroys the PR property of the filter bank, and thus other criteria of filter design should be adopted. We propose one such method. (iii Through extensive computer simulations, we compare CMT with zipper discrete multitone (z-DMT and filtered multitone (FMT, the two modulation techniques that have been included in the VDSL draft standard. Comparisons are made in terms of computational complexity, transmission latency, achievable bit rate, and resistance to radio ingress noise.

  15. Computationally Efficient Partial Crosstalk Cancellation in Fast Time-Varying DSL Crosstalk Environments

    Directory of Open Access Journals (Sweden)

    Forouzan Amir R

    2007-01-01

    Full Text Available Line selection (LS, tone selection (TS, and joint tone-line selection (JTLS partial crosstalk cancellers have been proposed to reduce the online computational complexity of far-end crosstalk (FEXT cancellers in digital subscriber lines (DSL. However, when the crosstalk profile changes rapidly over time, there is an additional requirement that the partial crosstalk cancellers, particularly the LS and JTLS schemes, should also provide a low preprocessing complexity. This is in contrast to the case for perfect crosstalk cancellers. In this paper, we propose two novel channel matrix inversion methods, the approximate inverse (AI and reduced inverse (RI schemes, which reduce the recurrent complexity of the LS and JTLS schemes. Moreover, we propose two new classes of JTLS algorithms, the subsort and Lagrange JTLS algorithms, with significantly lower computational complexity than the recently proposed optimal greedy JTLS scheme. The computational complexity analysis of our algorithms shows that they provide much lower recurrent complexities than the greedy JTLS algorithm, allowing them to work efficiently in very fast time-varying crosstalk environments. Moreover, the analytical and simulation results demonstrate that our techniques are close to the optimal solution from the crosstalk cancellation point of view. The results also reveal that partial crosstalk cancellation is more beneficial in upstream DSL, particularly for short loops.

  16. Multi-Carrier Modulation and MIMO Principle Application on Subscriber Lines

    Directory of Open Access Journals (Sweden)

    J. Vodrazka

    2007-12-01

    Full Text Available The multi-carrier modulation is used in many applications, primary for a wireless transmission, for example Wi-Fi and WiMAX networks or DVB-T. But the same physical principle can be used also for metallic lines in access or local networks, for example ADSL and VDSL. The multi-carrier modulation in these cases is called DMT. The dominant source of noise in multi-pair metallic cables is crosstalk when the information capacity is limited dramatically. However, information capacity of metallic lines can be increased, if the system is using MIMO principles, concrete VDMT modulation and line bounding concept. The methods for VDMT modulation and partial crosstalk cancellation are discussed and simulation results are presented.

  17. EBULLETIN: SUBSCRIBE NOW!

    CERN Multimedia

    2002-01-01

    You can now subscribe to the Web version of the Weekly Bulletin. With the new alert system, you will receive an e-mail message every Friday at 8.00 a.m. with the Web link to the latest issue. It is very easy to subscribe, just click on the link 'Subscribe' on the home page of the electronic Bulletin.

  18. Subscribing to Transparency

    DEFF Research Database (Denmark)

    He, Yinghua; Nielsson, Ulf; Guo, Hong

    2014-01-01

    The paper empirically explores how more trade transparency affects market liquidity. The analysis takes advantage of a unique setting in which the Shanghai Stock Exchange offered more trade transparency to market participants subscribing to a new software package. First, the results show...... that the additional data disclosure increased trading activity, but also increased transactions costs through wider bid-ask spreads. Thus, in contrast to popular policy belief, the paper finds that more transparency need not improve market liquidity. Second, the paper finds a particularly strong immediate liquidity...... impact accompanied by altered trading behavior, which suggests a significant impact on institutional traders subscribing relatively early. Lastly, since the effective level of market transparency is bound to depend on how many traders are subscribing to the data, the study can empirically establish...

  19. Subscribing to Transparency

    DEFF Research Database (Denmark)

    He, Yinghua; Nielsson, Ulf; Guo, Hong

    The paper empirically explores how more trade transparency affects market liquidity. The analysis takes advantage of a unique setting in which the Shanghai Stock Exchange offered more trade transparency to market participants subscribing to a new software package. First, the results show...... that the additional data disclosure increased trading activity, but also increased transactions costs through wider bid-ask spreads. Thus, in contrast to popular policy belief, the paper finds that more transparency need not improve market liquidity. Second, the paper finds a particularly strong immediate liquidity...... impact accompanied by altered trading behavior, which suggests a significant impact on institutional traders subscribing relatively early. Lastly, since the effective level of market transparency is bound to depend on how many traders are subscribing to the data, the study can empirically establish...

  20. Industrial Experiences with a Formal DSL Semantics to Check the Correctness of DSL Artifacts

    Directory of Open Access Journals (Sweden)

    Sarmen Keshishzadeh

    2016-03-01

    Full Text Available A domain specific language (DSL abstracts from implementation details and is aligned with the way domain experts reason about a software component. The development of DSLs is usually centered around a grammar and transformations that generate implementation code or analysis models. The semantics of the language is often defined implicitly and in terms of a transformation to implementation code. In the presence of multiple transformations from the DSL, the correctness of the generated artifacts with respect to the semantics of the DSL is a relevant issue. We show that a formal semantics is essential for checking the correctness of the generated artifacts. We exploit the formal semantics in an industrial project and use formal techniques based on equivalence checking and model-based testing for validating the correctness of the generated artifacts. We report about our experience with this approach in an industrial development project.

  1. Interrogative constructions in Danish Sign Language (DSL)

    DEFF Research Database (Denmark)

    Hansen, Julie

    question words can vary, though they usually appear sentence finally. The nonmanual signals include specific facial expressions, head posture and mouthing. Some of the features are shared with other sign languages. Furthermore, although it has not been investigated in detail it seems that the nonmanual...... to the understanding of the linguistic variation and similarities existing not only among sign languages but among languages in general....... of languages and the theoretical conclusions about how language works have primarily been based on studies of spoken languages. I believe that the study of DSL can provide additional and valuable insight into the possible structures of human language. Furthermore, this study will contribute...

  2. Standard model semantics for DSL, a data type specification language

    NARCIS (Netherlands)

    Bergstra, J.A.; Terlouw, J.

    1983-01-01

    We discuss a data type specification language DSL(∑) which is obtained from the first order language L(∑) for a given signature ∑ by augmenting it with schemes. A specification is a pair (∑, IF) with IF a finite set of axioms in DSL(∑). As semantics of such specifications we propose: standard

  3. Weaving Web Applications with WebDSL (Demonstration)

    NARCIS (Netherlands)

    Groenewegen, D.M.; Visser, E.

    2009-01-01

    This paper is a pre-print of: Danny M. Groenewegen, and Eelco Visser. Weaving Web Applications with WebDSL (Demonstration). In: Gary T. Leavens (editor) Companion to the 24th ACM SIGPLAN Conference on Object-Oriented Programing, Systems, Languages, and Applications (OOPSLA 2009). WebDSL is a

  4. SAGA: A DSL for Story Management

    Directory of Open Access Journals (Sweden)

    Lucas Beyak

    2011-09-01

    Full Text Available Video game development is currently a very labour-intensive endeavour. Furthermore it involves multi-disciplinary teams of artistic content creators and programmers, whose typical working patterns are not easily meshed. SAGA is our first effort at augmenting the productivity of such teams. Already convinced of the benefits of DSLs, we set out to analyze the domains present in games in order to find out which would be most amenable to the DSL approach. Based on previous work, we thus sought those sub-parts that already had a partially established vocabulary and at the same time could be well modeled using classical computer science structures. We settled on the 'story' aspect of video games as the best candidate domain, which can be modeled using state transition systems. As we are working with a specific company as the ultimate customer for this work, an additional requirement was that our DSL should produce code that can be used within a pre-existing framework. We developed a full system (SAGA comprised of a parser for a human-friendly language for 'story events', an internal representation of design patterns for implementing object-oriented state-transitions systems, an instantiator for these patterns for a specific 'story', and three renderers (for C++, C# and Java for the instantiated abstract code.

  5. A Dual Decomposition Approach to Partial Crosstalk Cancelation in a Multiuser DMT-xDSL Environment

    Directory of Open Access Journals (Sweden)

    Verlinden Jan

    2007-01-01

    Full Text Available In modern DSL systems, far-end crosstalk is a major source of performance degradation. Crosstalk cancelation schemes have been proposed to mitigate the effect of crosstalk. However, the complexity of crosstalk cancelation grows with the square of the number of lines in the binder. Fortunately, most of the crosstalk originates from a limited number of lines and, for DMT-based xDSL systems, on a limited number of tones. As a result, a fraction of the complexity of full crosstalk cancelation suffices to cancel most of the crosstalk. The challenge is then to determine which crosstalk to cancel on which tones, given a complexity constraint. This paper presents an algorithm based on a dual decomposition to optimally solve this problem. The proposed algorithm naturally incorporates rate constraints and the complexity of the algorithm compares favorably to a known resource allocation algorithm, where a multiuser extension is made to incorporate the rate constraints.

  6. Structural Characterization of Tip20p and Dsl1p, Subunits of the Dsl1p Vesicle Tethering Complex

    Energy Technology Data Exchange (ETDEWEB)

    Tripathi, A.; Ren, Y; Jeffrey, P; Hughson, F

    2009-01-01

    Multisubunit tethering complexes are essential for intracellular trafficking and have been proposed to mediate the initial interaction between vesicles and the membranes with which they fuse. Here we report initial structural characterization of the Dsl1p complex, whose three subunits are essential for trafficking from the Golgi apparatus to the endoplasmic reticulum (ER). Crystal structures reveal that two of the three subunits, Tip20p and Dsl1p, resemble known subunits of the exocyst complex, establishing a structural connection among several multisubunit tethering complexes and implying that many of their subunits are derived from a common progenitor. We show, moreover, that Tip20p and Dsl1p interact directly via N-terminal alpha-helices. Finally, we establish that different Dsl1p complex subunits bind independently to different ER SNARE proteins. Our results map out two alternative protein-interaction networks capable of tethering COPI-coated vesicles, via the Dsl1p complex, to ER membranes.

  7. Moonlighting functions of the NRZ (mammalian Dsl1 complex

    Directory of Open Access Journals (Sweden)

    Mitsuo eTagaya

    2014-06-01

    Full Text Available The yeast Dsl1 complex, which comprises Dsl1, Tip20, and Sec39/Dsl3, has been shown to participate, as a vesicle-tethering complex, in retrograde trafficking from the Golgi apparatus to the endoplasmic reticulum. Its metazoan counterpart NRZ complex, which comprises NAG, RINT1, and ZW10, is also involved in Golgi-to-ER retrograde transport, but each component of the complex has diverse cellular functions including endosome-to-Golgi transport, cytokinesis, cell cycle checkpoint, autophagy, and mRNA decay. In this review, we summarize the current knowledge of the metazoan NRZ complex and discuss the moonlighting functions and intercorrelation of their subunits.

  8. Prototyping the Semantics of a DSL using ASF+SDF: Link to Formal Verification of DSL Models

    Directory of Open Access Journals (Sweden)

    Suzana Andova

    2011-06-01

    Full Text Available A formal definition of the semantics of a domain-specific language (DSL is a key prerequisite for the verification of the correctness of models specified using such a DSL and of transformations applied to these models. For this reason, we implemented a prototype of the semantics of a DSL for the specification of systems consisting of concurrent, communicating objects. Using this prototype, models specified in the DSL can be transformed to labeled transition systems (LTS. This approach of transforming models to LTSs allows us to apply existing tools for visualization and verification to models with little or no further effort. The prototype is implemented using the ASF+SDF Meta-Environment, an IDE for the algebraic specification language ASF+SDF, which offers efficient execution of the transformation as well as the ability to read models and produce LTSs without any additional pre or post processing.

  9. Fiber-optic subscriber system based on passive optical network architecture

    Energy Technology Data Exchange (ETDEWEB)

    Kitazawa, M.; Yamazaki, M.; Himi, S. (Hitachi, Ltd., Tokyo (Japan))

    1994-04-01

    The subscriber line terminal and optical network unit were developed for the fiber-optic subscriber system based on a passive double star (PDS) optical network architecture which allows narrowband ISDN (integrated services digital network) services and video image transmission. Various LSIs were developed to implement the major system functions such as fast bit-synchronization, time division multiple access control, subscriber multiplexing/demultiplexing and 16-channel multiprocessing. For the optical interface module, the wavelength division multiplexing chip was hermetically sealed together with laser diode and photodiode chips by adopting high-silica based optical-waveguide technology to reduce a system dimension. The PDS fiber-optic subscriber system is useful for construction of economic optical subscriber networks because it allows multiple subscribers to share a single optical transmission line and a central equipment unit through a star coupler. 4 refs., 10 figs., 1 tab.

  10. UNA HERRAMIENTA DE DIAGNÓSTICO PARA ENLACES DE SUSCRIPCIÓN DIGITAL ASIMÉTRICA (ADSL A DIAGNOSTIC TOOL FOR ASYMMETRIC DIGITAL SUBSCRIBER LINE LINKS

    Directory of Open Access Journals (Sweden)

    Mario Medina Carrasco

    2009-04-01

    Full Text Available Se presenta el software CuLineAnalyzer, una herramienta de diagnóstico para enlaces ADSL que aprovecha las mediciones de las razones señal-ruido (SNR de los subcanales de la técnica de transmisión DMT realizadas por las propias unidades de terminación ADSL (ATU. Estos datos son adquiridos remotamente y se almacenan en una estación central, desde donde pueden ser desplegados a solicitud del operador, el cual los utiliza para realizar los diagnósticos pertinentes. Una fortaleza importante de esta herramienta es la capacidad de almacenar mediciones realizadas a diferentes horas del día durante largos períodos para detectar así condiciones esporádicas, errores espurios y tendencias en la condición de la línea. Esta herramienta ha sido usada con éxito para monitorear un banco de módems ADSL Alcatel SpeedTouch. El diseño modular y operación paramétrica de la herramienta permite adaptarla fácilmente a nuevos modelos de módems ADSL y DSLAMs.We present the CuLineAnalyzer software, a diagnostic tool for ADSL links that leverages the DMT subchannel signal-to-noise ratio (SNR measurements made by the ATUs themselves. These measurements are read via remote access and are logged into a central server, from which they can be displayed under operator control, so the pertinent diagnosis can be performed. An important strength of this tool is that it can store measurements performed at different times for long periods, so as to detect sporadic conditions, spurious errors and line condition trends. This tool has been used successfully to monitor a bank of Alcatel SpeedTouch ADSL modems. The tool's modular design and parametric operation makes it easy to adapt it to new ADSL modem and DSLAM models.

  11. Towards Error Handling in a DSL for Robot Assembly Tasks

    DEFF Research Database (Denmark)

    Laursen, Johan S.; Buch, Jacob P.; Sørensen, Lars C.

    This work-in-progress paper presents our work with a domain specific language (DSL) for tackling the issue of programming robots for small-sized batch production. We observe that as the complexity of assembly increases so does the likelihood of errors, and these errors need to be addressed....... Nevertheless, it is essential that programming and setting up the assembly remains fast, allows quick changeovers, easy adjustments and reconfigurations. In this paper we present an initial design and implementation of extending an existing DSL for assembly operations with error specification, error handling...

  12. On the impact of DSL tools on the maintainability of language implementations

    NARCIS (Netherlands)

    P. Klint (Paul); T. van der Storm (Tijs); J.J. Vinju (Jurgen); C. Brabrand (Claus); P.-E. Moreau

    2010-01-01

    htmlabstractDoes the use of DSL tools improve the maintainability of language implementations compared to implementations from scratch? We present empirical results on aspects of maintainability of six implementations of the same DSL using different languages (Java, JavaScript, C#) and DSL tools

  13. Publish Subscribe Systems Design and Principles

    CERN Document Server

    Tarkoma, Sasu

    2012-01-01

    This book offers an unified treatment of the problems solved by publish/subscribe, how to design and implement the solutions In this book, the author provides an insight into the publish/subscribe technology including the design, implementation, and evaluation of new systems based on the technology.  The book also addresses the basic design patterns and solutions, and discusses their application in practical application scenarios. Furthermore, the author examines current standards and industry best practices as well as recent research proposals in the area. Finally, necessary content ma

  14. Funding Alert Subscribe Confirmation | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Thank you. Please check your email ( ) to confirm your subscription to the IDRC Funding Alerts. Please note: the link in your confirmation email is valid for 3 days, so please reply promptly. We fund researchers driving global change. Careers · Contact Us · Subscribe · Unsubscribe · Site map. Follow us; Facebook · Twitter ...

  15. Subscribe to Newsletter | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Innovation. Solutions. Careers · Contact Us · Site map. Sign up now for IDRC news and views sent directly to your inbox each month. Subscribe · Copyright · Open access policy · Privacy policy · Research ethics · Transparency · Website usage. Follow us; Facebook · Twitter · Youtube · Linked In · RSS Feed. © 2016 IDRC.

  16. Reconfiguration Service for Publish/Subscribe Middleware

    NARCIS (Netherlands)

    Zieba, Bogumil; Glandrup, Maurice; van Sinderen, Marten J.; Wegdam, M.

    2006-01-01

    Mission-critical, distributed systems are often designed as a set of distributed, components that interact using publish/subscribe middleware. Currently, in these systems, software components are usually statically allocated to the nodes to fulfil predictability, reliability requirements. However, a

  17. Broadband Wireline Provider Service: Symmetric xDSL; BBRI_DSLsym12

    Data.gov (United States)

    University of Rhode Island Geospatial Extension Program — This dataset represents the availability of wireline broadband Internet access in Rhode Island via Symmetric xDSL technology. Broadband availability is summarized at...

  18. Design and application of link: A DSL for network frame manipulation

    CSIR Research Space (South Africa)

    Pennefather, S

    2017-08-01

    Full Text Available This paper describes the design and application of Link, a Domain Specific Language (DSL) targeting the development of network applications focused on traffic manipulation at the frame level. The development of Link is described through...

  19. Penaeoid and sergestoid shrimps from the deep scattering layer (DSL) in the Arabian Sea

    Digital Repository Service at National Institute of Oceanography (India)

    Karuppasamy, P.K.; Menon, N.G.

    Results of a preliminary study on the occurrence and distribution of seventeen species of Penaeoid and Sergestoid shrimps from the deep scattering layer (DSL) of the Indian EEZ of Arabian Sea are presented here based on the IKMT samples collected...

  20. Broadband Wireline Provider Service: Asymmetric xDSL; BBRI_DSLasym12

    Data.gov (United States)

    University of Rhode Island Geospatial Extension Program — This dataset represents the availability of wireline broadband Internet access in Rhode Island via Asymmetric xDSL technology. Broadband availability is summarized...

  1. Defining DSL design principles for enhancing the requirements elicitation process

    Directory of Open Access Journals (Sweden)

    Gustavo Arroyo

    2012-03-01

    Full Text Available La Elicitación de Requisitos propicia el entendimiento de las necesidades de los usuarios con respecto a un desarrollo de software. Los métodos que se emplean provienen de las ciencias sociales por lo que se carece de una retroalimentación ejecutable. Consecuentemente, la primera versión del software podría no cumplir con las expectativas. El uso de DSLs como herramientas para el descubrimiento de requisitos es una idea aceptada, desafortunadamente, muy pocos trabajos en la literatura se enfocan en la definición de principios de diseño de DSLs. En este trabajo planteamos principios de diseño de DSLs orientados a la elicitación de requisitos, enseguida, generamos casos de prueba en ANTLR, Ruby y Curry. También, enunciamos el perfil que debe tener el nuevo analista de software. Con ello, se incrementa la retroalimentación entre los involucrados en el desarrollo de software y se mejora el producto.Requirements elicitation is concerned with learning and understanding the needs of users w.r.t. a new software development. Frequently the methods employed for requirements elicitation are adapted from areas like social sciences that do not include executable (prototype based on feedback. As a consequence, it is relatively common to discover that the first release does not fit the requirements defined at the beginning of the project. Using domain-specific languages (DSLs as an auxiliary tool for requirements elicitation is a commonly well accepted idea. Unfortunately, there are few works in the literature devoted to the definition of design principles for DSLs to be experienced in the frameworks for DSL developing such as ANTLR, Ruby, and Curry. We propose design principles for the DSL development (regardless of paradigm which are sufficient to model the domain in a requirements phase. Further more we enunciate a new profile for the requirements analyst and a set of elicitation steps. The use of DSLs not only giveus an immediate feedback with

  2. SPOT: A DSL for Extending Fortran Programs with Metaprogramming

    Directory of Open Access Journals (Sweden)

    Songqing Yue

    2014-01-01

    Full Text Available Metaprogramming has shown much promise for improving the quality of software by offering programming language techniques to address issues of modularity, reusability, maintainability, and extensibility. Thus far, the power of metaprogramming has not been explored deeply in the area of high performance computing (HPC. There is a vast body of legacy code written in Fortran running throughout the HPC community. In order to facilitate software maintenance and evolution in HPC systems, we introduce a DSL that can be used to perform source-to-source translation of Fortran programs by providing a higher level of abstraction for specifying program transformations. The underlying transformations are actually carried out through a metaobject protocol (MOP and a code generator is responsible for translating a SPOT program to the corresponding MOP code. The design focus of the framework is to automate program transformations through techniques of code generation, so that developers only need to specify desired transformations while being oblivious to the details about how the transformations are performed. The paper provides a general motivation for the approach and explains its design and implementation. In addition, this paper presents case studies that illustrate the potential of our approach to improve code modularity, maintainability, and productivity.

  3. Slide 1

    Indian Academy of Sciences (India)

    Communications · Milestones in Communications · Internet · Speed · Broadband Access · Digital Subscriber Line (DSL) · Wireless Access · DSL · DMT DSL · Slide 11 · Lets Focus on Upstream (US) · Upstream Mathematical Model – tone wise · Crosstalk Characteristics · Performance loss due to FEXT * · Research Issues in ...

  4. Dsl1p, Tip20p, and the novel Dsl3(Sec39) protein are required for the stability of the Q/t-SNARE complex at the endoplasmic reticulum in yeast

    DEFF Research Database (Denmark)

    Kraynack, Bryan A; Chan, Angela; Rosenthal, Eva Helga

    2005-01-01

    -ER retrograde transport. Size exclusion chromatography and affinity purification approaches confirmed that Dsl3p is associated with subunits of the "Dsl1p complex." The complex also includes the Q/t-SNARE proteins, Use1p, Sec20p, and Ufe1p, integral membrane proteins that constitute the trimeric acceptor for R...

  5. Subscriber loop optical distribution architecture: a cost-effective TDM/TDMA subscriber loop system

    Science.gov (United States)

    Rueda, Javier; Eldering, Charles A.

    1992-02-01

    While it is clear that the development of the laser and low loss optical fiber has had an unmistakable impact on the field of telecommunications, the deployment of optical fiber in the subscriber (local) loop is an especially challenging task. It requires development of low cost equipment that will initially be used at low bit rates (Transmission of TV data, in either analog or digital form, will make more efficient use of the fiber bandwidth and generate additional revenues. But as seen from the perspective of the telephony industry, basic telephone services are the principal source of revenue and economic justification for the installation of subscriber loop fiber systems. For large scale deployment in the subscriber loop, the fiber optic system must provide basic telephone services with equal or better performance at a cost that is competitive with that of existing copper pair technology. In this paper we examine a number of possible fiber-to-the-home (FTTH) and fiber-to-the-curb (FTTC) architectures, and present an architecture for urban areas that is best classified as fiber-to-the-building (FTTB). We examine the costs and performance characteristics of the various networks. We show how demographic information can be used to optimize the capacity of the remote terminals. It is shown that for the demography of Spain (where in urban areas the majority of the population resides in apartment buildings with 10 or more dwellings) a remote terminal with a variable subscriber capacity presents a cost savings over remote terminals with a fixed number of subscriber channels.

  6. 47 CFR 10.270 - Subscribers' right to terminate subscription.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Subscribers' right to terminate subscription. 10.270 Section 10.270 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMERCIAL MOBILE ALERT SYSTEM Election to Participate in Commercial Mobile Alert System § 10.270 Subscribers' right to...

  7. Utilization and challenges of online subscribed databases by ...

    African Journals Online (AJOL)

    The paper investigated the Utilization and Challenges of Online Databases Subscribed to by university libraries in Katsina State. Objectives of the study were to find out the types of online subscribed databases used by academics in universities in Katsina; the extent to which the academics in the universities use the online ...

  8. The art of Spectral Management ; Upstream power back-off for VDSL2 - Whitepaper DSL05

    NARCIS (Netherlands)

    Brink, R.F.M. van den

    2009-01-01

    Spectral Management (SpM) involves managing an access network such that different systems can co-exist with each other. In relation to DSL systems, spectral management ensures that they can co-exist within the same cable. The use of spectral signal limits (specified via mandatory access rules) is

  9. The art of Spectral Management ; Access rules for VDSL2 - Whitepaper DSL02

    NARCIS (Netherlands)

    Brink, R.F.M. van den

    2009-01-01

    Spectral Management (SpM) involves managing an access network such that different systems can co-exist with each other. In relation to DSL systems, spectral management ensures that they can co-exist within the same cable. The use of spectral signal limits (specified via mandatory access rules) is a

  10. Integration of data validation and user interface concerns in a DSL for web applications

    NARCIS (Netherlands)

    Groenewegen, D.M.; Visser, E.

    2009-01-01

    This paper is a pre-print of: Danny M. Groenewegen, Eelco Visser. Integration of Data Validation and User Interface Concerns in a DSL for Web Applications. In Mark G. J. van den Brand, Jeff Gray, editors, Software Language Engineering, Second International Conference, SLE 2009, Denver, USA, October,

  11. Motif Subscriber Menonton Channel YouTube Raditya Dika

    OpenAIRE

    Mellyaningsih, Adinda

    2016-01-01

    Penelitian ini dilakukan untuk mengetahui motif para subscriber dalam menonton channelYouTube Raditya Dika. Raditya Dika merupakan YouTuber Indonesia dengan jumlah subscriber terbanyak dan merupakan orang pertama di Indonesia yang mendapatkan penghargaan Certifies Award oleh YouTube. Peneliti menggunakan teori Uses and Gratification dengan empat indikator, yaitu hiburan dan relaksasi, hubungan antar pribadi, mencari informasi, dan persahabatan. Metode dalam penelitian ini adalah online survei...

  12. A DSL for context quality modeling in context-aware applications

    OpenAIRE

    Hoyos, José R.; Preuveneers, Davy; García-Molina, Jesús J.; Berbers, Yolande

    2011-01-01

    Developing reliable context-aware applications remains a big challenge, even after a decade of research in this area. Usually a lot of code is required to handle an application's correct behavior in a variety of different situations. Along with a growing amount of code, also increases the risk of programming errors that may lead to an undesired behavior in particular situations. In this paper we present a domain specific language (DSL) for developing context-aware applications. It allows c...

  13. The Normalized-Rate Iterative Algorithm: A Practical Dynamic Spectrum Management Method for DSL

    Directory of Open Access Journals (Sweden)

    Statovci Driton

    2006-01-01

    Full Text Available We present a practical solution for dynamic spectrum management (DSM in digital subscriber line systems: the normalized-rate iterative algorithm (NRIA. Supported by a novel optimization problem formulation, the NRIA is the only DSM algorithm that jointly addresses spectrum balancing for frequency division duplexing systems and power allocation for the users sharing a common cable bundle. With a focus on being implementable rather than obtaining the highest possible theoretical performance, the NRIA is designed to efficiently solve the DSM optimization problem with the operators' business models in mind. This is achieved with the help of two types of parameters: the desired network asymmetry and the desired user priorities. The NRIA is a centralized DSM algorithm based on the iterative water-filling algorithm (IWFA for finding efficient power allocations, but extends the IWFA by finding the achievable bitrates and by optimizing the bandplan. It is compared with three other DSM proposals: the IWFA, the optimal spectrum balancing algorithm (OSBA, and the bidirectional IWFA (bi-IWFA. We show that the NRIA achieves better bitrate performance than the IWFA and the bi-IWFA. It can even achieve performance almost as good as the OSBA, but with dramatically lower requirements on complexity. Additionally, the NRIA can achieve bitrate combinations that cannot be supported by any other DSM algorithm.

  14. AGM: A DSL for mobile cloud computing based on directed graph

    Science.gov (United States)

    Tanković, Nikola; Grbac, Tihana Galinac

    2016-06-01

    This paper summarizes a novel approach for consuming a domain specific language (DSL) by transforming it to a directed graph representation persisted by a graph database. Using such specialized database enables advanced navigation trough the stored model exposing only relevant subsets of meta-data to different involved services and components. We applied this approach in a mobile cloud computing system and used it to model several mobile applications in retail, supply chain management and merchandising domain. These application are distributed in a Software-as-a-Service (SaaS) fashion and used by thousands of customers in Croatia. We report on lessons learned and propose further research on this topic.

  15. Subscribers' Complaints and Response of the Global Satellite ...

    African Journals Online (AJOL)

    The GSM subscribers on their part also face many problems, major of which is constant network failure. Other problems include card recharging problem; checking of balance difficulty and wrong deduction of credit. The study was therefore designed to examine how the GSM Network operators respond to the complaints of ...

  16. Subscribe to NIH MedlinePlus the Magazine

    Science.gov (United States)

    ... turn Javascript on. Subscribe to NIH MedlinePlus the magazine NIH MedlinePlus the magazine is published quarterly, in print and on the ... up for a free subscription to NIH MedlinePlus Magazine. Librarians may order this magazine in bulk . Please ...

  17. 76 FR 13769 - Rural Broadband Access Loans and Loan Guarantees

    Science.gov (United States)

    2011-03-14

    ... (FTTH) and digital subscriber line (DSL) systems in urban communities is considerably lower on a per... simply improving the perception of locally provided health care quality or expanding the menu of medical...

  18. The new OGC Publish-Subscribe specification - status of work

    Science.gov (United States)

    Bigagli, Lorenzo; Echterhoff, Johannes; Braeckel, Aaron

    2013-04-01

    We relate on the work of the Open Geospatial Consortium Publish/Subscribe Standards Working Group (in short, OGC PubSub SWG), which investigates a mechanism to support publish/subscribe requirements across OGC service interfaces and data types (coverage, feature, etc.) Two primary parties characterize the publish/subscribe model: a Publisher, which is publishing information, and a Subscriber, which expresses an interest in all or part of the published information. The publish/subscribe model is distinguished from the request/reply and client/server models by the asynchronous delivery of messages and the ability for a Subscriber to specify an ongoing (persistent) expression of interest. The publish/subscribe model can be useful to reduce the latency between event occurrence and event notification, as it is the Publisher's responsibility to publish a message when the event occurs, rather than relying on clients to anticipate the occurrence. The publish/subscribe model can also be used to decouple message production from message consumption by allowing messages to be passed through a third party (a message broker). OGC services such as WMS and WFS have primarily addressed the request/reply model because it is sufficient to meet many use cases. Clients request data of interest when it is needed and may periodically request updates. Request/reply may be supplemented with publish/subscribe, in which case the initial state of interest may be requested via request/reply, and then a subscription may be created so that changes and updates are delivered. This can result in less or more predictable network traffic. The PubSub SWG aims at a unified solution based on existing, well-adopted IT standards, taking into account previous work and discussions, such as the activities of OASIS and W3C on WS-Notification, relevant IETF RFCs such as ATOM and XMPP, as well as the experience gained through the OGC Interoperability and Standards Programs. The SWG was chartered in 2010. Its

  19. ScaMo: Realisation of an OO-functional DSL for cross platform mobile applications development

    Science.gov (United States)

    Macos, Dragan; Solymosi, Andreas

    2013-10-01

    The software market is dynamically changing: the Internet is going mobile, the software applications are shifting from the desktop hardware onto the mobile devices. The largest markets are the mobile applications for iOS, Android and Windows Phone and for the purpose the typical programming languages include Objective-C, Java and C ♯. The realization of the native applications implies the integration of the developed software into the environments of mentioned mobile operating systems to enable the access to different hardware components of the devices: GPS module, display, GSM module, etc. This paper deals with the definition and possible implementation of an environment for the automatic application generation for multiple mobile platforms. It is based on a DSL for mobile application development, which includes the programming language Scala and a DSL defined in Scala. As part of a multi-stage cross-compiling algorithm, this language is translated into the language of the affected mobile platform. The advantage of our method lies in the expressiveness of the defined language and the transparent source code translation between different languages, which implies, for example, the advantages of debugging and development of the generated code.

  20. Subscriber Behavior and Attitudes One Year after PM-AM Conversion.

    Science.gov (United States)

    Rarick, Galen R.; Lemert, James B.

    Because newspapers have begun switching from evening to morning publication with increasing frequency, a study investigated subscriber response to change in publication time and in subscriber behavior over time. In follow-up to an earlier study on subscriber reactions to the conversion to morning publication of the weekday Eugene (Oregon)…

  1. Design of a Domain-Specific Language for Material Flow Analysis using Microsoft DSL tools: An Experience Paper

    DEFF Research Database (Denmark)

    Zarrin, Bahram; Baumeister, Hubert

    2014-01-01

    Material Flow Analysis (MFA) is the procedure of measuring and assessing the mass flows of matter (solid waste, water, food...) and substances (carbon, phosphorus ...) within a process or a system for the period of time. In this paper we propose a Domain-Specific Language (DSL) to model MFA...

  2. MOBILE SUBSCRIBERS' SATISFACTION TOWARDS SERVICE QUALITY IN TUTICORIN DIST

    OpenAIRE

    Asst. Prof. S. Anthony Rahul Golden

    2017-01-01

    Due to huge competition in the service sector, service providers have to focus on lots of aspects in connection with satisfying the customer. Especially, the providers need to focus on increasing the service quality to maintain their position in the competitive market. Subscribers’ satisfaction is one of the determinants of service quality and perception carried by subscribers plays an important role in choosing a mobile service provider. This paper presents a service quality analysis of mobi...

  3. A novel Aurelia aurita protein mesoglein contains DSL and ZP domains.

    Science.gov (United States)

    Matveev, I V; Shaposhnikova, T G; Podgornaya, O I

    2007-09-01

    Body of the scyphoid jellyfish Aurelia aurita consists of 2 epithelia -- epidermis and gastroderm. The layers are separated by a thick layer of extracellular matrix -- mesoglea. A. aurita has a lot of cells in the mesoglea unlike many other Cnidarians. The major protein of the mesoglea with apparent molecular mass of 47 kDa was detected by SDS-PAGE. A partial mRNA of the protein 1421 bp long was cloned and sequenced. The search for homologous nucleotide and protein sequences shows that the mRNA sequence is novel. Deduced amino acid sequence of 416 aa contains zona pellucida (ZP) domain and Delta/Serrate/Lag-2 (DSL) domain. The protein was named mesoglein. According to reverse transcription PCR analysis it is expressed in the mature medusa exclusively in the mesogleal cells. Mesoglein belongs to the lowest phyla among ZP domain-containing proteins. The protein is supposed to be a structural element of the mesoglea extracellular matrix.

  4. Aspects of dynamic spectrum management level 3

    NARCIS (Netherlands)

    Story, C.; Zivkovic, Miroslav; Verlinden, J.; de Lind van Wijngaarden, A.

    2008-01-01

    Digital subscriber line (DSL) networks are currently enhanced to provide higher transmission rates and reliability in order to support emerging triple-play services, i.e., voice, video, and data. This is typically achieved by installing digital subscriber line access multiplexers (DSLAMs) in street

  5. Forensic Tools for Mobile Phone Subscriber Identity Modules

    Directory of Open Access Journals (Sweden)

    Wayne Jansen

    2006-06-01

    Full Text Available Mobile phones and other handheld devices incorporating cellular capabilities, such as Personal Digital Assistants, are ubiquitous.  Besides placing calls, these devices allow users to perform other useful tasks, including text messaging and phonebook entry management.  When cell phones and cellular devices are involved in a crime or other incident, forensic specialists require tools that allow the proper retrieval and speedy examination of data present on the device.  For devices conforming to the Global System for Mobile Communications (GSM standards, certain data such as dialed numbers, text messages, and phonebook entries are maintained on a Subscriber Identity Module (SIM.  This paper gives a snapshot of the state of the art of forensic software tools for SIMs and an explanation of the types of digital evidence they can recover.

  6. 47 CFR 10.280 - Subscribers' right to opt out of CMAS notifications.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 1 2010-10-01 2010-10-01 false Subscribers' right to opt out of CMAS notifications. 10.280 Section 10.280 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL COMMERCIAL MOBILE ALERT SYSTEM Election to Participate in Commercial Mobile Alert System § 10.280 Subscribers' right...

  7. Secret Forwarding of Events over Distributed Publish/Subscribe Overlay Network.

    Directory of Open Access Journals (Sweden)

    Young Yoon

    Full Text Available Publish/subscribe is a communication paradigm where loosely-coupled clients communicate in an asynchronous fashion. Publish/subscribe supports the flexible development of large-scale, event-driven and ubiquitous systems. Publish/subscribe is prevalent in a number of application domains such as social networking, distributed business processes and real-time mission-critical systems. Many publish/subscribe applications are sensitive to message loss and violation of privacy. To overcome such issues, we propose a novel method of using secret sharing and replication techniques. This is to reliably and confidentially deliver decryption keys along with encrypted publications even under the presence of several Byzantine brokers across publish/subscribe overlay networks. We also propose a framework for dynamically and strategically allocating broker replicas based on flexibly definable criteria for reliability and performance. Moreover, a thorough evaluation is done through a case study on social networks using the real trace of interactions among Facebook users.

  8. EXtending Mobility to Publish/Subscribe Systems Using a Pro-Active Caching Approach

    Directory of Open Access Journals (Sweden)

    Abdulbaset Gaddah

    2010-01-01

    Full Text Available The publish/subscribe communication paradigm has many characteristics that lend themselves well to mobile wireless networks. Our research investigates the extension of current publish/subscribe systems to support subscriber mobility in such networks. We present a novel mobility management scheme based on a pro-active caching approach to overcome the challenges and the performance concerns of disconnected operations in publish/subscribe systems. We discuss the mechanism of our proposed scheme and present a comprehensive experimental evaluation of our approach and alternative state-of-the-art solutions based on reactive approaches and durable subscriptions. The obtained results illustrate significant performance benefits of our proposed scheme across a range of scenarios. We conclude our work by discussing a modeling approach that can be used to extrapolate the performance of our approach in a near-size environment (in terms of broker network and/or subscriber population to our experimental testbed.

  9. Pull vs. Push: How OmniEarth Delivers Better Earth Observation Information to Subscribers

    Science.gov (United States)

    Fish, C.; Slagowski, S.; Dyrud, L.; Fentzke, J.; Hargis, B.; Steerman, M.

    2015-04-01

    Until very recently, the commercialization of Earth observation systems has largely occurred in two ways: either through the detuning of government satellites or the repurposing of NASA (or other science) data for commercial use. However, the convergence of cloud computing and low-cost satellites is enabling Earth observation companies to tailor observation data to specific markets. Now, underserved constituencies, such as agriculture and energy, can tap into Earth observation data that is provided at a cadence, resolution and cost that can have a real impact to their bottom line. To connect with these markets, OmniEarth fuses data from a variety of sources, synthesizes it into useful and valuable business information, and delivers it to customers via web or mobile interfaces. The "secret sauce" is no longer about having the highest resolution imagery, but rather it is about using that imagery - in conjunction with a number of other sources - to solve complex problems that require timely and contextual information about our dynamic and changing planet. OmniEarth improves subscribers' ability to visualize the world around them by enhancing their ability to see, analyze, and react to change in real time through a solutions-as-a-service platform.

  10. LINES

    Directory of Open Access Journals (Sweden)

    Minas Bakalchev

    2015-10-01

    Full Text Available The perception of elements in a system often creates their interdependence, interconditionality, and suppression. The lines from a basic geometrical element have become the model of a reductive world based on isolation according to certain criteria such as function, structure, and social organization. Their traces are experienced in the contemporary world as fragments or ruins of a system of domination of an assumed hierarchical unity. How can one release oneself from such dependence or determinism? How can the lines become less “systematic” and forms more autonomous, and less reductive? How is a form released from modernistic determinism on the new controversial ground? How can these elements or forms of representation become forms of action in the present complex world? In this paper, the meaning of lines through the ideas of Le Corbusier, Leonidov, Picasso, and Hitchcock is presented. Spatial research was made through a series of examples arising from the projects of the architectural studio “Residential Transformations”, which was a backbone for mapping the possibilities ranging from playfulness to exactness, as tactics of transformation in the different contexts of the contemporary world.

  11. An active 3-dimensional localization scheme for femtocell subscribers using E-UTRAN

    KAUST Repository

    Mohammed, Aquil Mirza

    2012-05-01

    Femtocells provide an efficient solution to overcome the indoor coverage problems and also to deal with the traffic within Macro cells. The possibility of localizing femtocell subscriber stations based on the timing ranging advance parameter (TRAP), obtained from E-UTRAN (Evolved UMTS Terrestrial Radio Access Network), within the network signal internals is challenging and is studied throughout in this paper. The principle approach to localization based on Euclidean distances from multiple base stations is outlined.We investigate the specifications of the timing parameters or TRAP used for air interface of 4G network as they relate to calculating the subscriber distances. Computer simulation is used to demonstrate the localization accuracy using multiple base station networks when estimating likely locations of femtocell subscribers stations on a twodimensional coordinate mapping system. However, we further extend our simulations to demonstrate expected location accuracy of subscriber stations, for multiple base station networks, on a three dimensional coordinate mapping scheme. The possibility of of error-fixes shows eight times greater accuracy than in previous results is expected to achieve by applying timing advance techniques to Global System for Mobile communications networks, by using a two-dimensional coordinate mapping scheme. We later compare our study with the effect of global positioning system (GPS) by using a three-dimensional coordinate mapping scheme, which is predicted to give an 72.4 cms accuracy of subscriber station location. © 2012 IEEE.

  12. Authenticated Location-Aware Publish/Subscribe Services in Untrusted Outsourced Environments

    Directory of Open Access Journals (Sweden)

    Han Yan

    2017-01-01

    Full Text Available Location-aware publish/subscribe is an important location-based service based on server-initiated model. Often times, the owner of massive spatio-textual messages and subscriptions outsources its location-aware publish/subscribe services to a third-party service provider, for example, cloud service provider, who is responsible for delivering messages to their relevant subscribers. The issue arising here is that the messages delivered by the service provider might be tailored for profit purposes, intentionally or not. Therefore, it is essential to develop mechanisms which allow subscribers to verify the correctness of the messages delivered by the service provider. In this paper, we study the problem of authenticating messages in outsourced location-aware publish/subscribe services. We propose an authenticated framework which not only can deliver the messages efficiently but also can make the subscribers’ authentication available with low cost. Extensive experiments on a real-world dataset demonstrate the effectiveness and efficiency of our proposed authenticated framework.

  13. Sinkronisasi Content E-learning Terdistribusi Berbasis Model Komunikasi Indirect Menggunakan Sistem Publish-Subscribe

    Directory of Open Access Journals (Sweden)

    Sufrendo Saputra

    2017-01-01

    Full Text Available Sinkronisasi content antar e-learning memungkinkan beberapa e-learning memiliki content yang sama secara konsisten. Perubahan content pada salah satu e-learning akan membuat sistem memastikan e-learning lain mengetahui perubahan tersebut. Model komunikasi yang memungkinkan adanya sinkronisasi ini merupakan komunikasi indirect berbasis publish-subscribe. Setiap e-learning memiliki content-nya masing-masing yang secara otomatis akan di-publish oleh sistem. E-learning lain yang tergabung dalam sistem sinkronisasi kemudian dapat memilih content mana yang ingin di-subscribe. Jika terdapat perubahan pada sebuah content, dan content tersebut memiliki subscriber, maka sistem akan memberitahu subscriber bahwa telah terjadi perubahan pada content. Teknologi utama yang digunakan dalam sistem ini adalah Moodle, PHP, dan Java. Moodle sebagai modul yang digunakan untuk mensimulasikan e-learning. PHP dan Java sebagai framework dari sistem sinkronisasi. Model komunikasi yang digunakan merupakan komunikasi indirect berbasis publish-subscribe. Model komunikasi ini menempatkan sebuah perantara bagi komunikasi antar e-learning.

  14. List of subscribers as the source of data on book history and the history of reading: case study of book subscribers' lists printed in Dalmatia in the early 19th century

    Directory of Open Access Journals (Sweden)

    Jelena Lakuš

    2013-02-01

    Full Text Available Customer networks or lists of subscribers as a new publishing phenomenon first occurred in Dalmatia in the early 19th century. It was a model of collective funding of book, magazine and newspaper publishing, which gradually replaced the earlier system of individual patronage. It resulted in the publication of lists of subscribers that contained the names of all those who financially supported the printing of a book. The data on names of subscribers, their occupation, place of residence and number of copies ordered, which was the usual content of subscribers, lists, make them very valuable sources for research on the history of books and reading. This paper tries to show the research potential of such lists by presenting a case-study of five preserved and available subscribers' lists found in publications printed between 1835 and 1848 in the Zadar print shop of Battara brothers. The paper analyses the quantitative data on subscribers, their geographical distribution, professional profile and gender, which does not exhaust their research potential in full. The analysis has shown that despite the austere educational opportunities, high incidence of unemployment, and many other limitations, there were people who treasured the written word. The subscribers mostly came from coastal cities like Zadar, Split and Dubrovnik, which were the most important publishing and cultural centres. Even though the subscribers came from Austria, Military Border, Italy, Croatia proper and Slavonia, as well as Bosnia and Herzegovina, which was then part of the Ottoman Empire, they make up only one eight of the total number of subscribers in the corpus. The subscribers are both Roman-Catholic and Orthodox, who mostly subscribed to books printed in the Cyrillic script. The subscribers come from a wide range of professions, mostly from the church circles in Dalmatia, and the fewest of them were professors and teachers, members of the army and the police. As expected

  15. A Uniform Publish-Subscribe Infrastructure for Communication in Wireless Mobile Environments

    DEFF Research Database (Denmark)

    Brønsted, Jeppe; Hansen, Klaus Marius; Thorup, Rolf

    2006-01-01

    provides a good communication abstraction for wireless networks of mobile nodes. In this paper we present PSI, a uniform publish-subscribe based infrastructure, for communication in wireless mobile environments. In PSI the application is divided into software components that each handles a well defined...... systems and therefore it is important to have communication middleware that hides the complexity of low level network programming and presents a clean and understandable abstraction over communication to the application programmer. It has previously been shown that the publish-subscribe messaging paradigm...

  16. Distributing Knight. Using Type-Based Publish/Subscribe for Building Distributed Collaboration Tools

    DEFF Research Database (Denmark)

    Damm, Christian Heide; Hansen, Klaus Marius

    2002-01-01

    more important. We present Distributed Knight, an extension to the Knight tool, for distributed, collaborative, and gesture-based object-oriented modelling. Distributed Knight was built using the type-based publish/subscribe paradigm. Based on this case, we argue that type-based publish...

  17. Crisis states of Helpline subscribers: issues of diagnosis and psychological care

    Directory of Open Access Journals (Sweden)

    G.S. Bannikov

    2014-08-01

    Full Text Available In recent years, the number of calls to the Helpline from people who are in crisis state, often with suicidal tendencies, has increased significantly. It is therefore particularly important that a helpline counselor had instant recognition skills of crisis state and the ability to quickly build a strategy for crisis counseling. The study described in the article was focused on crisis state structure of helpline subscribers using developed “Crisis state maps”. The subject of the study was the critical state of the individual subscribers seeking psychological help. We tested the assumption that the strategies and methods of psychological assistance are directly related to the features of crisis. We studied crisis state in 70 subscribers. Of these, 59 were females (12 to 66 years old and 11 males (11 to 40 years old. The average age of women was 34,5 years, of men – 23,4 years. The overall average age was 28,65 years. The study result was the portrait of typical helpline subscriber personality. We show the possible strategies of counseling

  18. Quantitative Analysis of Commercial Online Resources Subscribed to by Twenty-Three Academic Libraries

    Science.gov (United States)

    Orr, Sandy; Head, Jennifer; Nance, Jim

    2010-01-01

    Collection development for commercial online resources can be difficult without established standards, such as those librarians have for books. Using the Carnegie Classification System can be a good tool for generating a list of comparable universities to discover what they subscribe to. Librarians at the Paul Meek Library at the University of…

  19. 7 CFR 1735.13 - Location of facilities and service for nonrural subscribers.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Location of facilities and service for nonrural subscribers. 1735.13 Section 1735.13 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE GENERAL POLICIES, TYPES OF LOANS, LOAN REQUIREMENTS-TELECOMMUNICATIONS PROGRAM Loan Purposes and...

  20. Geolocation of WiMAX Subscriber Stations Based on the Timing Adjust Ranging Parameter

    Science.gov (United States)

    2009-12-01

    actual location. Such a GUI was developed in HTML with JavaScript, utilizing the Google Maps API to provide access to global satellite and terrain maps...idealized honeycomb cell layout, they are generally spaced to provide maximum coverage with the least number of towers dependent on subscriber

  1. Improving Packet Delivery Performance of Publish/Subscribe Protocols in Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Ernesto García Davis

    2013-01-01

    Full Text Available MQTT-S and CoAP are two protocols able to use the publish/subscribe model in Wireless Sensor Networks (WSNs. The high scalability provided by the publish/subscribe model may incur a high packet loss and therefore requires an efficient reliability mechanism to cope with this situation. The reliability mechanism of MQTT-S and CoAP employs a method which defines a fixed value for the retransmission timeout (RTO. This article argues that this method is not efficient for deploying publish/subscribe in WSN, because it may be unable to recover a packet, therefore resulting in a lower packet delivery ratio (PDR at the subscriber nodes. This article proposes and evaluates an adaptive RTO method, which consists in using a Smooth Round-trip Time and multiplying it by a constant parameter (K. Thanks to this method, the reliability mechanism of MQTT-S and CoAP would be able to react properly to packet loss and would also be lightweight in terms of energy, memory and computing for sensor nodes where these resources are critical. We present a detailed evaluation of the effects of the K value on the calculation of the adaptive RTO method. We also establish the setting for obtaining the highest PDR on the subscriber nodes for single-hop and multi-hop scenarios. The results for single-hop scenario show that use of the appropriate K value for the adaptive RTO method increases the PDR up to 76% for MQTT-S and up to 38% for CoAP when compared with the use of fixed RTO method for both protocols, respectively. Meanwhile the same comparison for multi-hop scenario, the adaptive RTO method increases the PDR up to 36% for MQTT-S and up to 14% for CoAP.

  2. Improving packet delivery performance of publish/subscribe protocols in wireless sensor networks.

    Science.gov (United States)

    Davis, Ernesto García; Calveras, Anna; Demirkol, Ilker

    2013-01-04

    MQTT-S and CoAP are two protocols able to use the publish/subscribe model in Wireless Sensor Networks (WSNs). The high scalability provided by the publish/subscribe model may incur a high packet loss and therefore requires an efficient reliability mechanism to cope with this situation. The reliability mechanism of MQTT-S and CoAP employs a method which defines a fixed value for the retransmission timeout (RTO). This article argues that this method is not efficient for deploying publish/subscribe in WSN, because it may be unable to recover a packet, therefore resulting in a lower packet delivery ratio (PDR) at the subscriber nodes. This article proposes and evaluates an adaptive RTO method, which consists in using a Smooth Round-trip Time and multiplying it by a constant parameter (K). Thanks to this method, the reliability mechanism of MQTT-S and CoAP would be able to react properly to packet loss and would also be lightweight in terms of energy, memory and computing for sensor nodes where these resources are critical. We present a detailed evaluation of the effects of the K value on the calculation of the adaptive RTO method. We also establish the setting for obtaining the highest PDR on the subscriber nodes for single-hop and multi-hop scenarios. The results for single-hop scenario show that use of the appropriate K value for the adaptive RTO method increases the PDR up to 76% for MQTT-S and up to 38% for CoAP when compared with the use of fixed RTO method for both protocols, respectively. Meanwhile the same comparison for multi-hop scenario, the adaptive RTO method increases the PDR up to 36% for MQTT-S and up to 14% for CoAP.

  3. Realizing IoT service's policy privacy over publish/subscribe-based middleware.

    Science.gov (United States)

    Duan, Li; Zhang, Yang; Chen, Shiping; Wang, Shiyao; Cheng, Bo; Chen, Junliang

    2016-01-01

    The publish/subscribe paradigm makes IoT service collaborations more scalable and flexible, due to the space, time and control decoupling of event producers and consumers. Thus, the paradigm can be used to establish large-scale IoT service communication infrastructures such as Supervisory Control and Data Acquisition systems. However, preserving IoT service's policy privacy is difficult in this paradigm, because a classical publisher has little control of its own event after being published; and a subscriber has to accept all the events from the subscribed event type with no choice. Few existing publish/subscribe middleware have built-in mechanisms to address the above issues. In this paper, we present a novel access control framework, which is capable of preserving IoT service's policy privacy. In particular, we adopt the publish/subscribe paradigm as the IoT service communication infrastructure to facilitate the protection of IoT services policy privacy. The key idea in our policy-privacy solution is using a two-layer cooperating method to match bi-directional privacy control requirements: (a) data layer for protecting IoT events; and (b) application layer for preserving the privacy of service policy. Furthermore, the anonymous-set-based principle is adopted to realize the functionalities of the framework, including policy embedding and policy encoding as well as policy matching. Our security analysis shows that the policy privacy framework is Chosen-Plaintext Attack secure. We extend the open source Apache ActiveMQ broker by building into a policy-based authorization mechanism to enforce the privacy policy. The performance evaluation results indicate that our approach is scalable with reasonable overheads.

  4. Analysis of Inverse Crosstalk Channel Estimation Using SNR Feedback

    NARCIS (Netherlands)

    Whiting, P.A.; Kramer, G.; Nuzman, C.J.; Ashikhmin, A.; van Wijngaarden, A.J.; Zivkovic, Miroslav

    Digital subscriber line (DSL) data rates for short loops are typically limited by crosstalk between adjacent lines rather than by background noise. Precoding can reduce crosstalk in the downstream from the access node to the customer premises equipment significantly if an accurate estimate of the

  5. Einsatz einer Echtzeit-Publish/Subscribe-Kommunikation für die Teleoperation mobiler Roboter

    Science.gov (United States)

    Lindhorst, Timo; Herms, André; Schulze, Michael

    In der Telerobotik werden mobile Roboter über ein Kommunikationsnetz durch einen Operator ferngesteuert. Um interaktiv zu operieren, mussen Daten in beide Richtungen in Echtzeit kommuniziert werden. Zusätzlich ist eine hohe Ausfallsicherheit des Systems zu gewährleisten. Diese Arbeit beschreibt die Umsetzung ernes solchen Szenarios unter Verwendung einer Echtzeit-Publish/Subscribe-Kommunikation. Ein drahtloses Mesh-Netzwerk erfüllt durch redundante Verbindungen die Anforderungen an die Kommunikation. Eine Publish/Subscribe-Middleware ermöglicht eine inhaltsbasierte Kommunikation und erlaubt dadurch eine hohe Flexibilität der Teilnehmer. Durch die modulare Software-Architektur der Applikationen entsteht ein verteiltes System, in dem mobile Roboter durch netzwerktransparente Kommunikation gesteuert werden.

  6. Building flexible, distributed collaboration tools using type-based publish/subscribe - The Distributed Knight case

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius; Damm, Christian Heide

    2004-01-01

    Distributed collaboration is becoming increasingly impor tant also in software development. Combined with an in creasing interest in experimental and agile approaches to software development, this poses challenges to tool sup port for software development. Specifically, tool support is needed...... for flexible, distributed collaboration. We intro duce the Distributed Knight tool that provides flexible and lightweight support for distributed collaboration in object oriented modelling. The Distributed Knight implementa tion builds crucially on the type-based publish/subscribe distributed communication...

  7. Structured P2P Overlay of Mobile Brokers for Realizing Publish/Subscribe Communication in VANET

    Directory of Open Access Journals (Sweden)

    Tulika Pandey

    2014-01-01

    Full Text Available Publish/subscribe communication paradigm provides asynchrony and decoupling, making it an elegant alternative for designing applications in distributed and dynamic environment such as vehicular ad hoc networks (VANETs. In this paradigm, the broker is the most important component that decouples other two components, namely, publisher and subscriber. Previous research efforts have either utilized the deployment of distributed brokers on stationary road side info-stations or have assigned the role of broker to any moving vehicle on ad hoc basis. In one approach, lots of preinstalled infrastructures are needed whereas, in another, the quality of service is not guaranteed due to unpredictable moving and stopping patterns of vehicles. In this paper, we present the architecture of distributed mobile brokers which are dynamically reconfigurable in the form of structured P2P overlay and act as rendezvous points for matching publications and subscriptions. We have taken city buses in urban settings to act as mobile brokers whereas other vehicles are considered to be in role of publishers and subscribers. These mobile brokers also assist in locating a vehicle for successful and timely transfer of notifications. We have performed an extensive simulation study to compare our approach with previously proposed approaches. Simulation results establish the applicability of our approach.

  8. Structured P2P Overlay of Mobile Brokers for Realizing Publish/Subscribe Communication in VANET

    Science.gov (United States)

    Pandey, Tulika; Garg, Deepak; Gore, Manoj Madhava

    2014-01-01

    Publish/subscribe communication paradigm provides asynchrony and decoupling, making it an elegant alternative for designing applications in distributed and dynamic environment such as vehicular ad hoc networks (VANETs). In this paradigm, the broker is the most important component that decouples other two components, namely, publisher and subscriber. Previous research efforts have either utilized the deployment of distributed brokers on stationary road side info-stations or have assigned the role of broker to any moving vehicle on ad hoc basis. In one approach, lots of preinstalled infrastructures are needed whereas, in another, the quality of service is not guaranteed due to unpredictable moving and stopping patterns of vehicles. In this paper, we present the architecture of distributed mobile brokers which are dynamically reconfigurable in the form of structured P2P overlay and act as rendezvous points for matching publications and subscriptions. We have taken city buses in urban settings to act as mobile brokers whereas other vehicles are considered to be in role of publishers and subscribers. These mobile brokers also assist in locating a vehicle for successful and timely transfer of notifications. We have performed an extensive simulation study to compare our approach with previously proposed approaches. Simulation results establish the applicability of our approach. PMID:24523629

  9. Towards a framework for deriving platform-independent model-driven software product lines

    Directory of Open Access Journals (Sweden)

    Andrés Paz

    2013-05-01

    Full Text Available Model-driven software product lines (MD-SPLs are created from domain models which are transformed, merged and composed with reusable core assets, until software products are produced. Model transformation chains (MTCs must be specified to generate such MD-SPLs. This paper presents a framework for creating platform-independent MD-SPLs; such framework includes a domain specific language (DSL for platform-independent MTC specification and facilities platform-specific MTC generation of several of the most used model transformation frameworks. The DSL also allows product line architects to compose generation taking the need for model transformation strategy and technology interoperability into account and specifying several types of variability involved in such generation.

  10. Understanding the Self-Directed Online Learning Preferences, Goals, Achievements, and Challenges of MIT OpenCourseWare Subscribers

    National Research Council Canada - National Science Library

    Curtis J Bonk; Mimi Miyoung Lee; Xiaojing Kou; Shuya Xu; Feng-Ru Sheu

    2015-01-01

      This research targeted the learning preferences, goals and motivations, achievements, challenges, and possibilities for life change of self-directed online learners who subscribed to the monthly OpenCourseWare (OCW...

  11. OPTIMASI PUBLISH-SUBSCRIBE ADAPTIF UNTUK MONITORING KEAMANAN SELASAR GEDUNG G4 TEKNIK ELEKTRO UNIVERSITAS NEGERI MALANG

    Directory of Open Access Journals (Sweden)

    I Made Wirawan

    2017-10-01

    Full Text Available Security and comfort become very important for every educational institution, especially college. Security and comfort should be properly integrated to create an ideal academic atmosphere. This research designs online security monitoring system of G4 TEUM's hallway area by utilizing social media using adaptive Publish Subscribe system. Publisher i.e. students upload the current condition of the G4 TEUM's hallway by utilizing social media: twitter, facebook or instagram, then brokers choose the uploaded data corresponding to G4 content to be sent in the form of notification to subscriber, which is TEUM security in the form of dynamic web application. The experimental results show that by using adaptive Publish-Subscribe method, the cpu usage is reduced by 31,76% and bandwith usage by 39,4%, compared with non-adaptive method, on data event obtained by both publisher and subscribe. Rasa aman dan nyaman merupakan salah satu hal  yang sangat berpengaruh pada dunia pendidikan dalam pembelajaran, khususnya di perguruan tinggi. Keamanan dan kenyamanan harus diintegrasikan dengan baik untuk menciptakan atmosfer akademik yang ideal. Penelitian ini merancang sistem pemantauan keamanan online di area selasar G4 TEUM dengan memanfaatkan media sosial yang menggunakan sistem Publish-Subscribe Adaptif. Publisher yaitu mahasiswa mengunggah kondisi terkini dari selasar G4 TEUM dengan memanfaatkan media sosial, seperti twitter, facebook, dan instagram, kemudian broker memilih data upload sesuai dengan konten G4 yang akan dikirimkan berupa notifikasi ke Subscriber, yaitu pihak keamanan TEUM dalam bentuk aplikasi web dinamis. Hasil percobaan menunjukkan bahwa dengan menggunakan metode Publish-Subscribe adaptif, penggunaan CPU berkurang sebesar 31,76% dan penggunaan bandwidth sebesar 39,4%, dibandingkan dengan metode non adaptif, pada data event yang diperoleh baik pada Publisher maupun Subscriber.

  12. Supporting QoS in broadband wireless and wired access

    NARCIS (Netherlands)

    Peelen, Bastien; Zivkovic, Miroslav; Bijwaard, D.; Teunissen, Harold

    2003-01-01

    Wireless local area network (WLAN), cable, and digital subscriber line (xDSL) are among the most popular broadband access technologies in use today. In all such technologies, the transport capacity provided at the level of the physical medium is non-deterministically shared by different traffic

  13. Mediamorphosis: Analyzing the Convergence of Digital Media ...

    African Journals Online (AJOL)

    User

    2011-04-19

    Apr 19, 2011 ... evolve and adapt. Digital media forms do not arise spontaneously and independently from old media. They are related and connected to old media. .... Larger, clearer TV screens. - Digital paper. - Digital subscriber line (DSL). - Holographic Theaters. - Personal channels. - Intelligent Video agents.

  14. 78 FR 59844 - Operation in the 57-64 GHz Band

    Science.gov (United States)

    2013-09-30

    ... digital systems in the 60 GHz band without increasing the potential for harmful interference, the... replace digital subscriber line (DSL) and cable modem broadband services, because the high cost of the point-to- point devices would preclude their off-the-shelf retail marketing to consumers. Therefore, out...

  15. A Traffic Prediction Model for Self-Adapting Routing Overlay Network in Publish/Subscribe System

    Directory of Open Access Journals (Sweden)

    Meng Chi

    2017-01-01

    Full Text Available In large-scale location-based service, an ideal situation is that self-adapting routing strategies use future traffic data as input to generate a topology which could adapt to the changing traffic well. In the paper, we propose a traffic prediction model for the broker in publish/subscribe system, which can predict the traffic of the link in future by neural network. We first introduced our traffic prediction model and then described the model integration. Finally, the experimental results show that our traffic prediction model could predict the traffic of link well.

  16. Solidarity or financial sustainability: an analysis of the values of community-based health insurance subscribers and promoters in Senegal.

    Science.gov (United States)

    Ouimet, Marie-Jo; Fournier, Pierre; Diop, Idrissa; Haddad, Slim

    2007-01-01

    Although community-based health insurance (CBHI) seemed promising to improve access to health care, its implementation has been slow and laborious. We hypothesize that the existing tension between the competing objectives of solidarity and financial sustainability that are pursued by CBHI may partly account for this. This paper aims to evaluate if there is a gap between CBHI subscribers' values and their promoters', and to determine which characteristics of subscribers and CBHIs are associated with their values. A study of all Senegal CBHI organizations was undertaken in 2002. The analysis includes: 1) content of interviews with subscribers and promoters; and 2) multilevel logistical analysis of the links between characteristics of subscribers (n = 394) and organizations (n = 46) and composite indicators representing values (redistribution, solidarity when difficulties, solidarity between healthy and unhealthy). Promoters emphasize financial sustainability; subscribers are split between financial sustainability and solidarity. Men, polygamous families and individuals with a lower socio-professional status are twice as likely to be in favour of redistribution; subscribers who participate in decision-making and those who think their CBHI is facing difficulties are less in favour of solidarity. At CBHI level, although the variance was significant, none of the variables were retained. More attention should be given to reducing the gap between promoters' and subscribers' values, and to increasing member participation in the processes involved in implementing CBHI. This could help all actors involved to understand and improve determinants of enrolment in, and performance of CBHI, thus increasing access to health care for vulnerable populations in developing countries.

  17. An Analytic Hierarchy Process Analysis: Application to Subscriber Retention Decisions in the Nigerian Mobile Telecommunications

    Directory of Open Access Journals (Sweden)

    Adebiyi Sulaimon Olanrewaju

    2015-12-01

    Full Text Available The introduction of mobile number portability (MNP in the Nigerian telecommunications industry has brought a new challenge for mobile operators. This study investigates the use of Analytic Hierarchy Process (AHP in customer retention decisions in the Nigerian telecommunication industry using a cross-sectional survey design. Primary data were obtained through questionnaires administered to 480 mobile telecommunications subscribers in six tertiary institutions located in Lagos State, Nigeria. These educational institutions were chosen using a multistage sampling technique. Of 438 questionnaires received from subscribers, 408 were valid. Based on this sample data an AHP model was built to assess the determinants of customer retention decisions. Next, eigen values, an eigen vector and maximum lambda (λMax were obtained using the AHP analysis for the matrices. This analysis shows that customers considered call quality as the important in the retention decision. We conclude that AHP is a meaningful tool for determining what motivates retention decisions, that can help network operators formulate effective customer retention strategies.

  18. Appropriate Roles for the Subscriber, Publisher, Editor, Author, and Reviewer in the Archives of Plastic Surgery

    Directory of Open Access Journals (Sweden)

    Kun Hwang

    2013-11-01

    Full Text Available Authors, editors and reviewers, publishers, and subscribers all play their role in scientific journals. These 5 stakeholders are essential to journals. In this paper, firstly, I briefly summarize the role of each journal stakeholder and their respective goals. Secondly, the status of each participant in the Archives of Plastic Surgery is described. Finally, I propose an appropriate role and plan for each of them. Specific roles and responsibilities include the following: subscribers should welcome and submit the critiques of published papers in letters to the editor. Publishers should trust editors and provide them with adequate financial support for ongoing quality improvement of the journal. The editor-in-chief should be given a sufficient period of time-several years-to build up journal quality and train the incoming editor. The editors, including section editors, are also responsible for increasing the author pool. One editor might be designated a 'devil's referee', that is, a kind of devil's advocate with the responsibility of examining the originality of the manuscript, taking a skeptical view of the manuscript, and looking for holes in the methods and results of reported experiments. Authors' responsibilities include submitting manuscripts with scientific integrity and being ready to take responsibility for their articles even long after publication. Finally, reviewers' responsibilities include identifying similar articles not cited. Reviewers are also welcome to write a discussion on the article they review.

  19. Determinants of Customer Loyalty among Mobile Telecom Subscribers in the Brong Ahafo Region of Ghana

    Directory of Open Access Journals (Sweden)

    Kwabena Adjei

    2014-01-01

    Full Text Available The purpose of this study is to investigate the determinants of brand equity among mobile telecom users in Brong Ahafo Region of Ghana. Mobile telecommunication providers have a great role in strengthening the economy and encouraging the efficiency among a large number of subscribers across the country. The success of any business depends on the strength of their brands, which attracts new and existing customers for continuous growth.  In Ghana, there are six mobile telecom providers operating in the market (Vodafone, Airtel, MTN, Tigo, Glo, & Expresso. Primary data was obtained through a questionnaire and residents of Sunyani Municipality were targeted for the study. 200 questionnaires were self-administered by the researchers to the subscribers of all the mobile telecom providers and 194 questionnaires were returned. The questionnaires were analysed using SPSS 16 and pearson correlation was used to establish the relationship between the dependent and independent variables. The results identified call rate/quality, network coverage and sales promotion as having significant positive relationship to customer loyalty. In addition, brand image and prompt customer service were seen to have a less effect on customer loyalty.

  20. Appropriate roles for the subscriber, publisher, editor, author, and reviewer in the archives of plastic surgery.

    Science.gov (United States)

    Hwang, Kun

    2013-11-01

    Authors, editors and reviewers, publishers, and subscribers all play their role in scientific journals. These 5 stakeholders are essential to journals. In this paper, firstly, I briefly summarize the role of each journal stakeholder and their respective goals. Secondly, the status of each participant in the Archives of Plastic Surgery is described. Finally, I propose an appropriate role and plan for each of them. Specific roles and responsibilities include the following: subscribers should welcome and submit the critiques of published papers in letters to the editor. Publishers should trust editors and provide them with adequate financial support for ongoing quality improvement of the journal. The editor-in-chief should be given a sufficient period of time-several years-to build up journal quality and train the incoming editor. The editors, including section editors, are also responsible for increasing the author pool. One editor might be designated a 'devil's referee', that is, a kind of devil's advocate with the responsibility of examining the originality of the manuscript, taking a skeptical view of the manuscript, and looking for holes in the methods and results of reported experiments. Authors' responsibilities include submitting manuscripts with scientific integrity and being ready to take responsibility for their articles even long after publication. Finally, reviewers' responsibilities include identifying similar articles not cited. Reviewers are also welcome to write a discussion on the article they review.

  1. Enabling Large-Scale IoT-Based Services through Elastic Publish/Subscribe.

    Science.gov (United States)

    Vavassori, Sergio; Soriano, Javier; Fernández, Rafael

    2017-09-19

    In this paper, we report an algorithm that is designed to leverage the cloud as infrastructure to support Internet of Things (IoT) by elastically scaling in/out so that IoT-based service users never stop receiving sensors' data. This algorithm is able to provide an uninterrupted service to end users even during the scaling operation since its internal state repartitioning is transparent for publishers or subscribers; its scaling operation is time-bounded and depends only on the dimension of the state partitions to be transmitted to the different nodes. We describe its implementation in E-SilboPS, an elastic content-based publish/subscribe (CBPS) system specifically designed to support context-aware sensing and communication in IoT-based services. E-SilboPS is a key internal asset of the FIWARE IoT services enablement platform, which offers an architecture of components specifically designed to capture data from, or act upon, IoT devices as easily as reading/changing the value of attributes linked to context entities. In addition, we discuss the quantitative measurements used to evaluate the scale-out process, as well as the results of this evaluation. This new feature rounds out the context-aware content-based features of E-SilboPS by providing, for example, the necessary middleware for constructing dashboards and monitoring panels that are capable of dynamically changing queries and continuously handling data in IoT-based services.

  2. Roles of publishers, subscription agents, and institutional subscribers in the academic journal business : Opinions after reading the “Series: Perspectives on serials crisis and scholarly communication practice”

    Science.gov (United States)

    Taguchi, Nobuyuki

    Roles of publishers, subscription agents, and institutional subscribers in the academic journal business : Opinions after reading the “Series: Perspectives on serials crisis and scholarly communication practice”

  3. Study of the B$_{s}^{0}\\overline{B}_{s}^{0}$ oscillation frequency using D$_{s}^{-}$l$^{+}$ combinations in Z decays

    CERN Document Server

    Buskulic, Damir; Décamp, D; Ghez, P; Goy, C; Lees, J P; Lucotte, A; Minard, M N; Odier, P; Pietrzyk, B; Casado, M P; Chmeissani, M; Crespo, J M; Delfino, M C; Efthymiopoulos, I; Fernández, E; Fernández-Bosman, M; Garrido, L; Juste, A; Martínez, M; Orteu, S; Pacheco, A; Padilla, C; Pascual, A; Perlas, J A; Riu, I; Sánchez, F; Teubert, F; Colaleo, A; Creanza, D; De Palma, M; Gelao, G; Girone, M; Iaselli, Giuseppe; Maggi, G; Maggi, M; Marinelli, N; Nuzzo, S; Ranieri, A; Raso, G; Ruggieri, F; Selvaggi, G; Silvestris, L; Tempesta, P; Zito, G; Huang, X; Lin, J; Ouyang, Q; Wang, T; Xie, Y; Xu, R; Xue, S; Zhang, J; Zhang, L; Zhao, W; Alemany, R; Bazarko, A O; Bonvicini, G; Cattaneo, M; Comas, P; Coyle, P; Drevermann, H; Forty, Roger W; Frank, M; Hagelberg, R; Harvey, J; Janot, P; Jost, B; Kneringer, E; Knobloch, J; Lehraus, Ivan; Lutters, G; Martin, E B; Mato, P; Minten, Adolf G; Miquel, R; Moneta, L; Oest, T; Pater, J R; Pusztaszeri, J F; Ranjard, F; Rensing, P E; Rolandi, Luigi; Schlatter, W D; Schmelling, M; Schneider, O; Tejessy, W; Tomalin, I R; Venturi, A; Wachsmuth, H W; Wagner, A; Wildish, T; Ajaltouni, Ziad J; Barrès, A; Boyer, C; Falvard, A; Gay, P; Guicheney, C; Henrard, P; Jousset, J; Michel, B; Monteil, S; Montret, J C; Pallin, D; Perret, P; Podlyski, F; Proriol, J; Rossignol, J M; Fearnley, Tom; Hansen, J B; Hansen, J D; Hansen, J R; Hansen, P H; Nilsson, B S; Wäänänen, A; Kyriakis, A; Markou, C; Simopoulou, Errietta; Siotis, I; Vayaki, Anna; Zachariadou, K; Blondel, A; Bonneaud, G R; Brient, J C; Bourdon, P; Rougé, A; Rumpf, M; Valassi, Andrea; Verderi, M; Videau, H L; Candlin, D J; Parsons, M I; Focardi, E; Parrini, G; Corden, M; Georgiopoulos, C H; Jaffe, D E; Antonelli, A; Bencivenni, G; Bologna, G; Bossi, F; Campana, P; Capon, G; Casper, David William; Chiarella, V; Felici, G; Laurelli, P; Mannocchi, G; Murtas, F; Murtas, G P; Passalacqua, L; Pepé-Altarelli, M; Curtis, L; Dorris, S J; Halley, A W; Knowles, I G; Lynch, J G; O'Shea, V; Raine, C; Reeves, P; Scarr, J M; Smith, K; Thompson, A S; Thomson, F; Thorn, S; Turnbull, R M; Becker, U; Geweniger, C; Graefe, G; Hanke, P; Hansper, G; Hepp, V; Kluge, E E; Putzer, A; Rensch, B; Schmidt, M; Sommer, J; Stenzel, H; Tittel, K; Werner, S; Wunsch, M; Abbaneo, D; Beuselinck, R; Binnie, David M; Cameron, W; Dornan, Peter J; Moutoussi, A; Nash, J; Sedgbeer, J K; Stacey, A M; Williams, M D; Dissertori, G; Girtler, P; Kuhn, D; Rudolph, G; Betteridge, A P; Bowdery, C K; Colrain, P; Crawford, G; Finch, A J; Foster, F; Hughes, G; Sloan, Terence; Williams, M I; Galla, A; Greene, A M; Kleinknecht, K; Quast, G; Renk, B; Rohne, E; Sander, H G; Van Gemmeren, P; Zeitnitz, C; Aubert, Jean-Jacques; Bencheikh, A M; Benchouk, C; Bonissent, A; Bujosa, G; Calvet, D; Carr, J; Diaconu, C A; Etienne, F; Konstantinidis, N P; Payre, P; Rousseau, D; Talby, M; Sadouki, A; Thulasidas, M; Trabelsi, K; Aleppo, M; Ragusa, F; Abt, I; Assmann, R W; Bauer, C; Blum, Walter; Dietl, H; Dydak, Friedrich; Ganis, G; Gotzhein, C; Jakobs, K; Kroha, H; Lütjens, G; Lutz, Gerhard; Männer, W; Moser, H G; Richter, R H; Rosado-Schlosser, A; Schael, S; Settles, Ronald; Seywerd, H C J; Saint-Denis, R; Wiedenmann, W; Wolf, G; Boucrot, J; Callot, O; Cordier, A; Davier, M; Duflot, L; Grivaz, J F; Heusse, P; Jacquet, M; Kim, D W; Le Diberder, F R; Lefrançois, J; Lutz, A M; Nikolic, I A; Park, H J; Park, I C; Schune, M H; Simion, S; Veillet, J J; Videau, I; Azzurri, P; Bagliesi, G; Batignani, G; Bettarini, S; Bozzi, C; Calderini, G; Carpinelli, M; Ciocci, M A; Ciulli, V; Dell'Orso, R; Fantechi, R; Ferrante, I; Foà, L; Forti, F; Giassi, A; Giorgi, M A; Gregorio, A; Ligabue, F; Lusiani, A; Marrocchesi, P S; Messineo, A; Palla, Fabrizio; Rizzo, G; Sanguinetti, G; Sciabà, A; Spagnolo, P; Steinberger, Jack; Tenchini, Roberto; Tonelli, G; Vannini, C; Verdini, P G; Walsh, J; Blair, G A; Bryant, L M; Cerutti, F; Chambers, J T; Gao, Y; Green, M G; Medcalf, T; Perrodo, P; Strong, J A; Von Wimmersperg-Töller, J H; Botterill, David R; Clifft, R W; Edgecock, T R; Haywood, S; Maley, P; Norton, P R; Thompson, J C; Wright, A E; Bloch-Devaux, B; Colas, P; Emery, S; Kozanecki, Witold; Lançon, E; Lemaire, M C; Locci, E; Marx, B; Pérez, P; Rander, J; Renardy, J F; Roussarie, A; Schuller, J P; Schwindling, J; Trabelsi, A; Vallage, B; Black, S N; Dann, J H; Johnson, R P; Kim, H Y; Litke, A M; McNeil, M A; Taylor, G; Booth, C N; Boswell, R; Brew, C A J; Cartwright, S L; Combley, F; Köksal, A; Lehto, M H; Newton, W M; Reeve, J; Thompson, L F; Böhrer, A; Brandt, S; Büscher, V; Cowan, G D; Grupen, Claus; Minguet-Rodríguez, J A; Rivera, F; Saraiva, P; Smolik, L; Stephan, F; Apollonio, M; Bosisio, L; Della Marina, R; Giannini, G; Gobbo, B; Musolino, G; Rothberg, J E; Wasserbaech, S R; Armstrong, S R; Bellantoni, L; Elmer, P; Feng, Z; Ferguson, D P S; Gao, Y S; González, S; Grahl, J; Greening, T C; Harton, J L; Hayes, O J; Hu, H; McNamara, P A; Nachtman, J M; Orejudos, W; Pan, Y B; Saadi, Y; Schmitt, M; Scott, I J; Sharma, V; Walsh, A M; Wu Sau Lan; Wu, X; Yamartino, J M; Zheng, M; Zobernig, G

    1996-01-01

    A lower limit on the oscillation frequency of the BsBsbar system is obtained from approximately four million hadronic Z decays accumulated using the ALEPH detector at LEP from 1991 to 1995. Leptons are combined with opposite sign Ds- candidates reconstructed in seven different decay modes as evidence of semileptonic Bs decays. Criteria designed to ensure precise proper time reconstruction select 277 Ds-,l+ combinations. The initial state of these Bs candidates is determined using an algorithm optimized to efficiently utilise the tagging information available for each event. The limit at 95\\% confidence level on the BsBsbar oscillation frequency is delta_m_s > 6.6 ps^-1. The same data is used to update the measurement of the Bs lifetime, tau_s = 1.54 +0.14 (stat) +0.04 (syst) ps. -0.13 -0.04

  4. Secure publish-subscribe protocols for heterogeneous medical wireless body area networks.

    Science.gov (United States)

    Picazo-Sanchez, Pablo; Tapiador, Juan E; Peris-Lopez, Pedro; Suarez-Tangil, Guillermo

    2014-11-28

    Security and privacy issues in medical wireless body area networks (WBANs) constitute a major unsolved concern because of the challenges posed by the scarcity of resources in WBAN devices and the usability restrictions imposed by the healthcare domain. In this paper, we describe a WBAN architecture based on the well-known publish-subscribe paradigm. We present two protocols for publishing data and sending commands to a sensor that guarantee confidentiality and fine-grained access control. Both protocols are based on a recently proposed ciphertext policy attribute-based encryption (CP-ABE) scheme that is lightweight enough to be embedded into wearable sensors. We show how sensors can implement lattice-based access control (LBAC) policies using this scheme, which are highly appropriate for the eHealth domain. We report experimental results with a prototype implementation demonstrating the suitability of our proposed solution.

  5. Implications of New Technological Adaptions on Switching Barriers: An Empirical Study of Mobile Telecommunication Subscribers in Sri Lanka

    Directory of Open Access Journals (Sweden)

    EACP Karunarathne

    2017-02-01

    Full Text Available With the technological advancements in the past few years in the mobile telecommunication industry, customer requirements and their behavioral patterns changed a lot. Implications of two of most popular such technological approaches which are independent from the service provider were discussed in this paper. Usually, firms have identified the value of maintaining a higher level of switching barriers since it is one kind of successful strategic aspects in mobile telecommunication. But, the importance of these strategies was challenged with the adoptions of new technologies. Therefore, to study its’ implication, data set was obtained by conducting a survey from randomly select mobile subscribers in Sri Lanka. Descriptive statistics, correlation analysis, t-test and factorial ANOVA test were used for the data analysis purpose. According to the analysis, it is revealed that these two technological advancements are weakened the level of switching barriers significantly. It may allow subscribers to switch service providers easily. On the other hand, subscribers with higher relationship age are having the highest switching barrier level even though they are users of those new technologies. But a significant difference among users and non-users has been identified through the study. Thus, policy makers are required to come up with new strategies to retain those subscribers within the network.

  6. Determination of Optimum Number of Trunk Lines for Corporate ...

    African Journals Online (AJOL)

    The problem of determining the optimum number of telecommunication trunk lines subscribers' common equipment) for a given average traffic intensity is contributory, among other things, to the problem encountered in providing cost effective and high quality telecommunication services to corporate network users.

  7. Comparing NAL-NL1 and DSL v5 in Hearing Aids Fit to Children with Severe or Profound Hearing Loss: Goodness of Fit-to-Targets, Impacts on Predicted Loudness and Speech Intelligibility.

    Science.gov (United States)

    Ching, Teresa Y C; Quar, Tian Kar; Johnson, Earl E; Newall, Philip; Sharma, Mridula

    2015-03-01

    An important goal of providing amplification to children with hearing loss is to ensure that hearing aids are adjusted to match targets of prescriptive procedures as closely as possible. The Desired Sensation Level (DSL) v5 and the National Acoustic Laboratories' prescription for nonlinear hearing aids, version 1 (NAL-NL1) procedures are widely used in fitting hearing aids to children. Little is known about hearing aid fitting outcomes for children with severe or profound hearing loss. The purpose of this study was to investigate the prescribed and measured gain of hearing aids fit according to the NAL-NL1 and the DSL v5 procedure for children with moderately severe to profound hearing loss; and to examine the impact of choice of prescription on predicted speech intelligibility and loudness. Participants were fit with Phonak Naida V SP hearing aids according to the NAL-NL1 and DSL v5 procedures. The Speech Intelligibility Index (SII) and estimated loudness were calculated using published models. The sample consisted of 16 children (30 ears) aged between 7 and 17 yr old. The measured hearing aid gains were compared with the prescribed gains at 50 (low), 65 (medium), and 80 dB SPL (high) input levels. The goodness of fit-to-targets was quantified by calculating the average root-mean-square (RMS) error of the measured gain compared with prescriptive gain targets for 0.5, 1, 2, and 4 kHz. The significance of difference between prescriptions for hearing aid gains, SII, and loudness was examined by performing analyses of variance. Correlation analyses were used to examine the relationship between measures. The DSL v5 prescribed significantly higher overall gain than the NAL-NL1 procedure for the same audiograms. For low and medium input levels, the hearing aids of all children fit with NAL-NL1 were within 5 dB RMS of prescribed targets, but 33% (10 ears) deviated from the DSL v5 targets by more than 5 dB RMS on average. For high input level, the hearing aid fittings of

  8. Theatre Involvement and Well-Being, Age Differences, and Lessons From Long-Time Subscribers.

    Science.gov (United States)

    Meeks, Suzanne; Shryock, Sarah Kelly; Vandenbroucke, Russell J

    2017-04-08

    Activities that provide positive emotions, meaningful social interaction, and psychological stimulation can bolster well-being throughout life. We tested a model of psychological benefit from, and age differences in, adult ticket buyers' involvement with a large regional theatre. We sent online surveys to Actors Theatre of Louisville ticketbuyers, measuring involvement with the theatre, satisfaction/enjoyment, social engagement, flow, and sense of belonging while attending, and well-being. Structural models (N = 496) tested a model of well-being and age differences; focus groups of older subscribers (N = 20) elaborated quantitative findings. As hypothesized, theatre involvement was indirectly related to satisfaction and enjoyment of the theatre, hedonic well-being, and social functioning, through the psychosocial benefits of flow, social engagement, and belonging. Age moderated the model relationships: involvement was more strongly related to benefits for younger than older participants, but there were no age differences in the relationship between benefits and well-being. Focus group participants articulated how theatre contributes to a sense of community and pride of place, connecting individual well-being to community well-being. Involvement in performing arts organizations may have lifelong benefits. The relationship between involvement and psychosocial benefit may be particularly strong for younger audience members despite the fact that older adults have more involvement. Older adults with long-term involvement appear to benefit even when they reduce their involvement. Our qualitative findings underscore the great richness of experience that younger generations might lose as a result of lower participation.

  9. An Electric Vehicle Charging Management Scheme Based on Publish/Subscribe Communication Framework

    Science.gov (United States)

    Cao, Yue; Wang, Ning; Kamel, George; Kim, Young-Jin

    2017-09-01

    Motivated by alleviating CO$_2$ pollution, Electric Vehicle (EV) based applications have recently received wide interests from both commercial and research communities by using electric energy instead of traditional fuel energy. Although EVs are inherently with limited travelling distance, such limitation could be overcome by deploying public Charging Stations (CSs) to recharge EVs battery during their journeys. In this paper we propose a novel communication framework for on-the-move EV charging scenario, based on the Publish/Subscribe (P/S) mechanism for disseminating necessary CS information to EVs, in order for them to make optimized decisions on where to charge. A core part of our communication framework is the utilization of Road Side Units (RSUs) to bridge the information flow from CSs to EVs, which has been regarded as a type of cost-efficient communication infrastructure. Under this design, we introduce two complementary communication modes of signalling protocols, namely Push and Pull Modes, in order to enable the required information dissemination operation. Both analysis and simulation show the advantage of Pull Mode, in which the information is cached at RSUs to support asynchronous communication. We further propose a remote reservation service based on the Pull Mode, such that the CS-selection decision making can utilize the knowledge of EVs' charging reservation, as published from EVs through RSUs to CSs. Results show that both the performance at CS and EV sides are further improved based on using this anticipated information.

  10. Self-Adapting Routing Overlay Network for Frequently Changing Application Traffic in Content-Based Publish/Subscribe System

    Directory of Open Access Journals (Sweden)

    Meng Chi

    2014-01-01

    Full Text Available In the large-scale distributed simulation area, the topology of the overlay network cannot always rapidly adapt to frequently changing application traffic to reduce the overall traffic cost. In this paper, we propose a self-adapting routing strategy for frequently changing application traffic in content-based publish/subscribe system. The strategy firstly trains the traffic information and then uses this training information to predict the application traffic in the future. Finally, the strategy reconfigures the topology of the overlay network based on this predicting information to reduce the overall traffic cost. A predicting path is also introduced in this paper to reduce the reconfiguration numbers in the process of the reconfigurations. Compared to other strategies, the experimental results show that the strategy proposed in this paper could reduce the overall traffic cost of the publish/subscribe system in less reconfigurations.

  11. Peering into the Future: Peer-to-Peer Technology as a Model for Distributed Joint Battlespace Intelligence Dissemination and Operational Tasking

    Science.gov (United States)

    2001-06-01

    Chapter 1 INTRODUCTION A soldier . . . in peacetime is like a sailor navigating by dead reckoning. You have left the terra firma of the last war and... digital subscriber lines (DSL) has allowed PCs to receive and transmit high volumes of information.24 "What has changed is what the nodes of these...Computer information is stored digitally , whereas information transmitted over telephone lines is transmitted in the form of analog waves. A modem

  12. Power-line communication testbed through underdetermined blind source separation

    Science.gov (United States)

    Chanyagorn, Pornchai; Kopriva, Ivica; Szu, Harold H.

    2002-03-01

    Powerline communication has become interesting as a new choice of communication media by using OFDM in the Europe Internet application and using TDMA in power meters' reading in Japan mimicking the function of phone-line DSL. However, this raw copper media without hefty infrastructure investment such as the telephone twisted pair DSL has many challenges, because it was designed to transmit an electrical current that had isolated power grid with transformers, it has nothing that is suitable to convey data but it is everywhere in the last mile of connecting households. To make everything worse, the powerline is also easily interfered by unpredictable impulsive noise, background colored noise, and fatal attenuation of signal. Our goal is to take the US city grid power-line as a supplement to the concept of a single-user & multiple- sensor-broadcasting applications for security. To successfully communicate through the power-line for the household/stadium/subway/traffic-lights security application, e.g. separated video feds find themselves the single owner PC through the common household/stadium/subway/traffic-lights power-line, we develop and test an appropriate sparse coding, compression, and error correction to succeed the task with a limited bandwidth technique. In this paper we did not apply out human sensory preserving compression code, but to concentrate on sparse coding BSS with the less-bandwidth- demanding audio signals. In this paper, we describe a detail model of the power-line topologies based on realistic powerline data, and quantify the error rates of transmitted data on the powerline in the cases when noise is presented in the channel.

  13. Satellite Terminal Quality of Service Management with AQM Control

    OpenAIRE

    Delpoux, Romain; Berthou, Pascal; Gouaisbaut, Frédéric; Labit, Yann

    2009-01-01

    International audience; The standardization of a Return Channel via Satellite (DVB-RCS) and the satellite community effor ts in term of interoperability over the last few years are expected to play, in a near future, a decisive role in Next Generation Networks (NGNs) through the integration of Satellite networks as an alternative to terrestrial networks like DSL (Digital Subscriber Line) in low terrestrial in-frastructure areas. Fur thermore, the advance of distributed multimedia applications...

  14. Navigation Upgrades to the National Deep Submergence Facility Vehicles D.S.V. Alvin, Jason 2, and the DSL-120A

    Science.gov (United States)

    Whitcomb, L. L.; Kinsey, J. C.; Yoerger, D. R.; Taylor, C. L.; Bowen, A. D.; Walden, B. B.; Fornari, D. J.

    2003-12-01

    We report on recently completed enhancements to the navigation systems employed on the 4500m submersible Alvin and the 6500m ROV Jason 2 and DSL-120A sonar system of the UNOLS National Deep Submergence Facility (NDSF) of the Woods Hole Oceanographic Institution (WHOI). Over the last two years we have significantly improved the accuracy and update rate of the six degree-of-freedom vehicle position and velocity navigation data available for these vehicles, thus improving the quantitative accuracy of acoustic surveys, optical surveys, and sampling operations. The navigation upgrades have also enabled improvements in the closed-loop dynamic positioning accuracy of the Jason 2 ROV, thus improving the vehicle tracking precision during survey and sampling operations. We have sought to employ more a uniform suite of navigation instruments, navigation data processing software systems, and data logging format standards for NDSF vehicles to improve the utility and ease-of-use of data by science users. Improved navigation instruments deployed on each of these vehicles in 2001 and 2002 include the following: (a) A 1200 KHz Bottom Lock Doppler Sonar (RDInstruments Inc.) providing three dimensional vehicle velocity information with respect to the ocean floor and the water column at an update rate of up to 10 Hz, providing a single-ping beam-velocity error standard deviation of 0.3% for a nominal advance velocity of 1 meter/sec. (b) A north-seeking fiber-optic gyroscope (IXSEA Inc.) providing true-north heading, pitch, and roll with a rated accuracy of 0.1 degree. Improved navigation data processing software systems deployed on these vehicles in 2001 and 2002 includes Dvlnav, an interactive navigation program developed at JHU for precision navigation of underwater vehicles and submersibles. DVLNAV employs a variety of sensors including bottom lock Doppler sonar, long baseline (LBL) acoustic navigation, gyro compasses, magnetic compasses, depth sensors, altimeters, and (when

  15. Model-based DSL frameworks

    NARCIS (Netherlands)

    Ivanov, Ivan; Bézivin, J.; Jouault, F.; Valduriez, P.

    2006-01-01

    More than five years ago, the OMG proposed the Model Driven Architecture (MDA™) approach to deal with the separation of platform dependent and independent aspects in information systems. Since then, the initial idea of MDA evolved and Model Driven Engineering (MDE) is being increasingly promoted to

  16. Single parameter wrist ultrasonography as a first-line screening examination in suspected carpal tunnel syndrome patients.

    Science.gov (United States)

    Kurca, E; Nosal, V; Grofik, M; Sivak, S; Turcanova-Koprusakova, M; Kucera, P

    2008-01-01

    Carpal tunnel syndrome (CTS) is the most common form of peripheral nerve entrapment. Electromyography with selected nerve conduction studies (NCS) is an accepted diagnostic tool in CTS patients. Ultrasonography presents a widely available and low cost investigation method and its position in CTS diagnostics needs further clarification with concrete recommendations for clinical practice. A prospective study of 37 patients with 74 wrists (59 wrists with suspected CTS) was done. Normative data were obtained from a control group of 25 healthy persons (50 wrists) age and sex matched. All persons underwent ultrasonographic examination (median nerve cross-sectional area at carpal tunnel entrance measurement--CSA) and median NCS studies (distal motor and sensory latency measurement--DML and DSL). CSA has a sensitivity of 93% (CI 84-97%) and specificity of 96% (CI 87-99%) in our patients group. Conventional first-line NCS studies results in our patients groupare as follows: DML sensitivity 58% (CI 45-69%) and specificity 100% (CI 93-100%); DSL sensitivity 88% (CI 78-94%) and specificity 94% (CI 84-98%). We recommend the use of single-parameter wrist ultrasonography as a first-line screening laboratory method in suspected CTS diagnosis (Ref. 14). Full Text (Free, PDF) www.bmj.sk.

  17. A communication model to integrate the Request-Response and the Publish-Subscribe paradigms into ubiquitous systems.

    Science.gov (United States)

    Rodríguez-Domínguez, Carlos; Benghazi, Kawtar; Noguera, Manuel; Garrido, José Luis; Rodríguez, María Luisa; Ruiz-López, Tomás

    2012-01-01

    The Request-Response (RR) paradigm is widely used in ubiquitous systems to exchange information in a secure, reliable and timely manner. Nonetheless, there is also an emerging need for adopting the Publish-Subscribe (PubSub) paradigm in this kind of systems, due to the advantages that this paradigm offers in supporting mobility by means of asynchronous, non-blocking and one-to-many message distribution semantics for event notification. This paper analyzes the strengths and weaknesses of both the RR and PubSub paradigms to support communications in ubiquitous systems and proposes an abstract communication model in order to enable their seamless integration. Thus, developers will be focused on communication semantics and the required quality properties, rather than be concerned about specific communication mechanisms. The aim is to provide developers with abstractions intended to decrease the complexity of integrating different communication paradigms commonly needed in ubiquitous systems. The proposal has been applied to implement a middleware and a real home automation system to show its applicability and benefits.

  18. A Communication Model to Integrate the Request-Response and the Publish-Subscribe Paradigms into Ubiquitous Systems

    Directory of Open Access Journals (Sweden)

    Tomás Ruiz-López

    2012-06-01

    Full Text Available The Request-Response (RR paradigm is widely used in ubiquitous systems to exchange information in a secure, reliable and timely manner. Nonetheless, there is also an emerging need for adopting the Publish-Subscribe (PubSub paradigm in this kind of systems, due to the advantages that this paradigm offers in supporting mobility by means of asynchronous, non-blocking and one-to-many message distribution semantics for event notification. This paper analyzes the strengths and weaknesses of both the RR and PubSub paradigms to support communications in ubiquitous systems and proposes an abstract communication model in order to enable their seamless integration. Thus, developers will be focused on communication semantics and the required quality properties, rather than be concerned about specific communication mechanisms. The aim is to provide developers with abstractions intended to decrease the complexity of integrating different communication paradigms commonly needed in ubiquitous systems. The proposal has been applied to implement a middleware and a real home automation system to show its applicability and benefits.

  19. Diet and trophic ecology of the lanternfish Electrona risso (Cocco 1829) in the Strait of Messina (central Mediterranean Sea) and potential resource utilization from the Deep Scattering Layer (DSL)

    Science.gov (United States)

    Battaglia, Pietro; Andaloro, Franco; Esposito, Valentina; Granata, Antonia; Guglielmo, Letterio; Guglielmo, Rosanna; Musolino, Simona; Romeo, Teresa; Zagami, Giacomo

    2016-07-01

    The feeding habits of the mesopelagic lanternfish Electrona risso from the Strait of Messina (central Mediterranean Sea) were analyzed for the first time. A total of 326 individuals were collected stranded along the Sicilian coast of the Strait of Messina from October 2012 to May 2013. Specimens ranged from 12.0 to 53.8 mm LS (mean LS = 38.6 ± 8.4 mm). Their stomach content was examined and prey composition and feeding strategy were investigated. The results indicate that E. risso is a specialist predator, which feeds mainly on the small mesopelagic fish Cyclothone braueri (%IRI = 74.06) and in minor proportion on zooplankton, with a prevalence of copepods. The specialized feeding strategy of E. risso is confirmed by the low value of Levins standardized index (Bj = 0.141), which indicated a restricted niche breadth. The value of the index of trophic level (TROPH) for E. risso resulted 4.20. The prey composition suggests that E. risso can be considered a weakly vertical migrating species, that feeds on the DSL crustacean and fish communities below 300 m of depth.

  20. Towards Interactive, Incremental Programming of ROS Nodes

    DEFF Research Database (Denmark)

    Adam, Marian Sorin; Schultz, Ulrik Pagh

    Writing software for controlling robots is a complex task, usually demanding command of many programming languages and requiring significant experimentation. We believe that a bottom-up development process that complements traditional component- and MDSD-based approaches can facilitate...... experimentation. We propose the use of an internal DSL providing both a tool to interactively create ROS nodes and a behaviour-replacement mechanism to interactively reshape existing ROS nodes by wrapping the external interfaces (the publish/subscribe topics), dynamically controlled using the Python command line...

  1. Neural network for solving Nash equilibrium problem in application of multiuser power control.

    Science.gov (United States)

    He, Xing; Yu, Junzhi; Huang, Tingwen; Li, Chuandong; Li, Chaojie

    2014-09-01

    In this paper, based on an equivalent mixed linear complementarity problem, we propose a neural network to solve multiuser power control optimization problems (MPCOP), which is modeled as the noncooperative Nash game in modern digital subscriber line (DSL). If the channel crosstalk coefficients matrix is positive semidefinite, it is shown that the proposed neural network is stable in the sense of Lyapunov and global convergence to a Nash equilibrium, and the Nash equilibrium is unique if the channel crosstalk coefficients matrix is positive definite. Finally, simulation results on two numerical examples show the effectiveness and performance of the proposed neural network. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Urban Growth Projection for DSL-SAMBI

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset represents the extent of urbanization (for the year indicated) predicted by the model SLEUTH, developed by Dr. Keith C. Clarke, at the University of...

  3. An IMS DSL Developed at Ericsson

    OpenAIRE

    Potvin, Pascal; Bonja, Mario; Bailey, Gordon; Busnel, Pierre

    2015-01-01

    A full representation of a simulation model encompasses the behavior of the elements that define the model, the definition of the probability distributions that define the delays of the events that control the model, the experimental framework needed for execution, and the graphical representation of certain model elements. This paper aims to use specification and description language to achieve a full model rep- resentation by adding two extensions to the language, which al...

  4. 用戶著作權侵權之網路服務業者責任 Internet Service Provider Liability for Subscriber Copyright Infrigement

    Directory of Open Access Journals (Sweden)

    蔡蕙芳 Hui-Fang Tsai

    2004-12-01

    Full Text Available 網路服務業者的責任可說是網路上最具爭議的問題。本文的目的在於從一般性原則上討論用戶涉及著作權侵權時,網路服務業者是否可能成立民事侵權與刑事犯罪責任。個案的深入討論並不在本文範圍內。本文首先介紹美國侵權法上網路服務業者責任,內容包括法院判決、學說見解與國會立法。其次,本文將從刑法理論來分析用戶成立直接正犯之同時,網路服務業者可能構成共同正犯、正犯後正犯或共犯。此外,也將分別檢討正犯與共犯之成立要件。最後,本文將檢討我國法上相關法律如何適用以解決網路服務 業者責任,並提出增訂網路服務業者責任規定之建議。 The liability of internet service provider (ISP is perhaps the most controversial legal issue to emerge from cyberspace. The purpose of this paper is to explore the general principles as to whether there should be civil and criminal liability for ISP concerning subscriber copyright infringement. An in-depth treatment of case study is beyond the scope of this paper. The first section provides an overview of the doctrine of ISP copyright infringement liability in America, followed by the introduction of judicial decisions, opinions of scholars and new legislation. Focusing on criminal liability that could be imposed upon ISP for copyright infringement initiated by subscribers, the second section seeks to illustrate the observation that the individuals who post copyright infringement materials act as principals in the first degree, and ISP would qualify as an accomplice, principal in the second degree, or accessory to the crimes. Furthermore, this section discusses in turn the qualifications for the perpetrators and accomplices. Finally, the third section reviews the current Taiwan tort and criminal law and its application to ISP and concludes that the Taiwan copyright law should make specific provision for

  5. High Line

    DEFF Research Database (Denmark)

    Kiib, Hans

    2015-01-01

    factories and warehouses on Gansevoort Street. Today the High Line is a beautiful park covered with new tiles, viewing platforms and smaller recreational areas. The park bridge has simple, uniform, urban fittings and features a variety of flowering plants, grasses, shrubs and trees from around the world......, and galleries. With the High Line, a new urban architectural typology has been created that is aesthetically enriching and sets new standards for urban transformation and urban life. “The park accommodates the wild, the cultivated, the intimate and the social. Access points are durational experiences designed...

  6. XRTPS – EXTENSIBLE REAL-TIME PUBLISH-SUBSCRIBE: MIDDLEWARE MULTICAST PARA TROCA DE DADOS BASEADO EM XML PARA REDES DE TEMPO REAL

    Directory of Open Access Journals (Sweden)

    Jalerson Raposo Ferreira de Lima

    2011-06-01

    Full Text Available Um fator recorrente das redes de escritório é a busca por maior desempenho, ou seja, redes que executem suas tarefas no menor tempo possível. Porém, para redes industriais o desempenho médio não é o fator mais relevante, isso porque o desempenho de um sistema de tempo real está diretamente relacionado com a previsibilidade imposta pelo ambiente. Enquanto as redes de escritório são orientadas a obter o melhor desempenho médio possível, as redes industriais são orientadas a requisitos temporais, dado que o fator de cumprimento das metas temporais é imperativo em muitas aplicações de tempo real, ou seja, o determinismo. O padrão Ethernet é a principal tecnologia de interconexão de redes locais, porém ainda não foi estabelecido como padrão para redes industriais porque o seu método de acesso ao meio, o CSMA/CD, não atende aos requisitos temporais exigidos por esse tipo de rede. Esse trabalho teve como objetivo desenvolver um middleware em Java para troca de dados em redes industriais, denominado Extensible Real-Time Publish Subscribe. Java foi escolhida como a tecnologia de desenvolvimento a fim de garantir a independência de plataforma provida pela Máquina Virtual Java. Essa independência também é provida pelo próprio middleware, uma vez que suas mensagens são formatadas em XML, que por se tratar de um padrão mundial estabelecido pela W3C, pode ser manipulado por diferentes tecnologias.

  7. Broadband Access Network Planning Optimization Considering Real Copper Cable Lengths

    Science.gov (United States)

    Peternel, Blaž Kos, Andrej

    Broadband access network planning strategies with techno-economic calculations are important topics, when optimal broadband network deployments are considered. This paper analyzes optimal deployment combination of digital subscriber line technologies (xDSL) and fiber to the home technologies (FTTx), following different user bandwidth demand scenarios. For this reason, optimal placement of remote digital subscriber line multiplexer (RDSLAM) is examined. Furthermore, the article also discusses the economy of investments, depending on certain investment threshold and the reach of different xDSL technologies. Finally, the difference between broadband network deployment in a characteristic urban and rural area in Republic of Slovenia, in terms of required optical cable dig length per household is shown. A tree structure network model of a traditional copper access network is introduced. A dynamic programming logic, with recursion as a basis of a tree structure examination and evaluation of optimal network elements placement is used. The tree structure network model considers several real network parameters (e. g.: copper cable lengths, user coordinates, node coordinates). The main input for the optimization is a local loop distance between each user and a candidate node for RDSLAM placement. Modelling of copper access networks with a tree structure makes new extensions in planning optimization of broadband access networks. Optimization of network elements placement has direct influence on efficiency and profitability of broadband access telecommunication networks.

  8. production lines

    Directory of Open Access Journals (Sweden)

    Jingshan Li

    2000-01-01

    Full Text Available In this work, serial production lines with finished goods buffers operating in the pull regime are considered. The machines are assumed to obey Bernoulli reliability model. The problem of satisfying customers demand is addressed. The level of demand satisfaction is quantified by the due-time performance (DTP, which is defined as the probability to ship to the customer a required number of parts during a fixed time interval. Within this scenario, the definitions of DTP bottlenecks are introduced and a method for their identification is developed.

  9. Investigation of VDSL2 Digital Lines with Bridged Taps and Various Parameters

    Directory of Open Access Journals (Sweden)

    Pavel Lafata

    2013-01-01

    Full Text Available Modern Very-High Speed Digital Subscriber Lines (VDSL2 can potentially increase the transmission rates in access networks up to tens of Mbps in both directions. However, the real transmission performance of VDSL2 technology is heavily influenced by real conditions of symmetrical pairs and quads in local metallic cables. This paper is primarily focused on the bridged taps and their influence on transmission performance of VDSL2 lines. The presence of bridged taps can complexly affect resulting attenuation, impedance and also crosstalk characteristics of transmission lines, moreover while this influence may differ for various types of metallic cables. That is why a comparison for several typical cables used in last-mile segments was performed and is presented here. The simulations and calculations presented in this paper are based on ABCD matrices, and thanks to that the simulations can be performed for various scenarios and situations.

  10. Parallel Lines

    Directory of Open Access Journals (Sweden)

    James G. Worner

    2017-05-01

    Full Text Available James Worner is an Australian-based writer and scholar currently pursuing a PhD at the University of Technology Sydney. His research seeks to expose masculinities lost in the shadow of Australia’s Anzac hegemony while exploring new opportunities for contemporary historiography. He is the recipient of the Doctoral Scholarship in Historical Consciousness at the university’s Australian Centre of Public History and will be hosted by the University of Bologna during 2017 on a doctoral research writing scholarship.   ‘Parallel Lines’ is one of a collection of stories, The Shapes of Us, exploring liminal spaces of modern life: class, gender, sexuality, race, religion and education. It looks at lives, like lines, that do not meet but which travel in proximity, simultaneously attracted and repelled. James’ short stories have been published in various journals and anthologies.

  11. VT Digital Line Graph Miscellaneous Transmission Lines

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This datalayer is comprised of Miscellaineous Transmission Lines. Digital line graph (DLG) data are digital representations of cartographic...

  12. Peripheral intravenous line - infants

    Science.gov (United States)

    PIV - infants; Peripheral IV - infants; Peripheral line - infants; Peripheral line - neonatal ... A peripheral intravenous line (PIV) is a small, short, plastic tube, called a catheter. A health care provider puts the PIV through the ...

  13. Sewer Main Pipe Lines

    Data.gov (United States)

    U.S. Environmental Protection Agency — This is a line feature dataset with lines across the island of Guam. These lines represent the sewer mains that carry refuse to the sewer plants for processing and...

  14. Abstract Line Designs

    Science.gov (United States)

    Nevinskas, Nancy

    2011-01-01

    In this article, the author describes a unit on the exploration of line. The unit was composed of two individual line lessons. In the first lesson, students were introduced to line as an element of design. They were asked to describe different types of lines, and look for them in art reproductions. The second lesson in the unit involved painting…

  15. Community LINE Source Model (C-LINE)

    Science.gov (United States)

    This presentation provides an introduction for the live demo and explains the purpose of C-LINE and its key features. C-LINE is a web-based model designed to inform the community user of local air quality impacts due to mobile-sources in their region of interest using a simplifie...

  16. Nuclear reactor overflow line

    Science.gov (United States)

    Severson, Wayne J.

    1976-01-01

    The overflow line for the reactor vessel of a liquid-metal-cooled nuclear reactor includes means for establishing and maintaining a continuous bleed flow of coolant amounting to 5 to 10% of the total coolant flow through the overflow line to prevent thermal shock to the overflow line when the reactor is restarted following a trip. Preferably a tube is disposed concentrically just inside the overflow line extending from a point just inside the reactor vessel to an overflow tank and a suction line is provided opening into the body of liquid metal in the reactor vessel and into the annulus between the overflow line and the inner tube.

  17. VT Electric Transmission Line Corridors - corridor lines

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The ELTRN layer depicts electric transmission line corridors in Vermont. Various methods have been used to digitize features. The data layer...

  18. Lined canvas paintings

    DEFF Research Database (Denmark)

    Krarup Andersen, Cecil

    2013-01-01

    This work evaluates the lining history of the Danish Golden Age collection of canvas paintings from the nineteenths century at SMK, The National Gallery of Denmark, and seeks to understand the moisture sensitivity of the paintings before and after lining. This is done by chemical analysis...... and tensile testing samples from the tacking edges as well as lined mock-up samples. The ability of the different lining techniques to support canvas paintings is evaluated in terms of their initial stretching and during fluctuations of relative humidity. Six different combinations of lining adhesives...... and textiles were examined. These included the adhesives Beva 371, Plextol D360, wax-resin, and glue-paste. The lining textiles were linen and polyester sailcloth. A naturally aged canvas painting and a modern painting were lined using these materials and methods. Testing of the lined paintings included uni...

  19. Peripheral arterial line (image)

    Science.gov (United States)

    A peripheral arterial line is a small, short plastic catheter placed through the skin into an artery of the arm or leg. The purpose of a peripheral arterial line is to allow continuous monitoring of blood pressure ...

  20. Homotopic Polygonal Line Simplification

    DEFF Research Database (Denmark)

    Deleuran, Lasse Kosetski

    This thesis presents three contributions to the area of polygonal line simplification, or simply line simplification. A polygonal path, or simply a path is a list of points with line segments between the points. A path can be simplified by morphing it in order to minimize some objective function...

  1. GPON FTTH trial: lessons learned

    Science.gov (United States)

    Weis, Erik; Hölzl, Rainer; Breuer, Dirk; Lange, Christoph

    2009-11-01

    This paper reports on a FTTH field trial with GPON (Gigabit-capable passive optical network) technology in the network of Deutsche Telekom in the region of the cities of Berlin and Potsdam. Focus of this trial was to gain practical experience regarding GPON technology, fibre installation in existing ducts with micro duct technology, fibre cabling in customer buildings and impact on operational processes. Furthermore it is reported on an initial Deutsche Telekom FTTB deployment based on GPON technology in the city of Dresden with the main targets to obtain practical deployment and operation experiences with fibre-based access networks and to provide broadband access to a part of the city formerly not servable by DSL (digital subscriber line) technology.

  2. Service Differentiation in Residential Broadband Networks

    DEFF Research Database (Denmark)

    Sigurdsson, Halldór Matthias

    2004-01-01

    As broadband gains widespread adoption with residential users, revenue generating voice- and video-services have not yet taken off. This slow uptake is often attributed to lack of Quality of Service management in residential broadband networks. To resolve this and induce service variety, network...... access providers are implementing service differentiation in their networks where voice and video gets prioritised before data. This paper discusses the role of network access providers in multipurpose packet based networks and the available migration strategies for supporting multimedia services...... in digital subscriber line (DSL) based residential broadband networks. Four possible implementation scenarios and their technical characteristics and effects are described. To conclude, the paper discusses how network access providers can be induced to open their networks for third party service providers....

  3. ADSL Transceivers Applying DSM and Their Nonstationary Noise Robustness

    Directory of Open Access Journals (Sweden)

    Bostoen Tom

    2006-01-01

    Full Text Available Dynamic spectrum management (DSM comprises a new set of techniques for multiuser power allocation and/or detection in digital subscriber line (DSL networks. At the Alcatel Research and Innovation Labs, we have recently developed a DSM test bed, which allows the performance of DSM algorithms to be evaluated in practice. With this test bed, we have evaluated the performance of a DSM level-1 algorithm known as iterative water-filling in an ADSL scenario. This paper describes the results of, on the one hand, the performance gains achieved with iterative water-filling, and, on the other hand, the nonstationary noise robustness of DSM-enabled ADSL modems. It will be shown that DSM trades off nonstationary noise robustness for performance improvements. A new bit swap procedure is then introduced to increase the noise robustness when applying DSM.

  4. Series Transmission Line Transformer

    Science.gov (United States)

    Buckles, Robert A.; Booth, Rex; Yen, Boris T.

    2004-06-29

    A series transmission line transformer is set forth which includes two or more of impedance matched sets of at least two transmissions lines such as shielded cables, connected in parallel at one end ans series at the other in a cascading fashion. The cables are wound about a magnetic core. The series transmission line transformer (STLT) which can provide for higher impedance ratios and bandwidths, which is scalable, and which is of simpler design and construction.

  5. VT DSL Broadband Availability by Census Block - 12-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201112 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2011. This...

  6. VT DSL Broadband Availability by Census Block - 12-2012

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201212 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2012. This...

  7. DynSem : A DSL for Dynamic Semantics Specification

    NARCIS (Netherlands)

    Vergu, V.; Neron, P.; Visser, E.

    2015-01-01

    The formal definition the semantics of a programming language and its implementation are typically separately defined, with the risk of divergence such that properties of the formal semantics are not properties of the implementation. In this paper, we present DynSem, a domain-specific language for

  8. Micro-Machinations: A DSL for Game Economies

    NARCIS (Netherlands)

    P. Klint (Paul); R. van Rozen (Riemer); M. Erwig; R. F. Paige; E. van Wyk

    2013-01-01

    htmlabstractIn the multi-billion dollar game industry, time to market limits the time developers have for improving games. Game designers and software engineers usually live on opposite sides of the fence, and both lose time when adjustments best understood by designers are implemented by engineers.

  9. VT DSL Broadband Availability by Census Block - 06-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201006 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2010. This...

  10. Sea Level Rise Projections for DSL-SAMBI

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This dataset is output from the Sea Level Affecting Marshes Model (SLAMM) for the South Atlantic Migratory Bird Initiative (SAMBI) geographic planning region. It...

  11. VT DSL Broadband Availability by Census Block - 06-2011

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201106 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2011. This...

  12. Static Consistency Checking of Web Applications with WebDSL

    NARCIS (Netherlands)

    Hemel, Z.; Groenewegen, D.M.; Kats, L.C.L.; Visser, E.

    2010-01-01

    Modern web application development frameworks provide web application developers with highlevel abstractions to improve their productivity. However, their support for static verification of applications is limited. Inconsistencies in an application are often not detected statically, but appear as

  13. VT DSL Broadband Availability by Census Block - 12-2010

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201012 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 12/31/2010. This...

  14. VT DSL Broadband Availability by Census Block - 06-2013

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The VTBB201306 VT Broadband Availability Dataset represents wireline and wireless 'broadband service' availability in VT as of 6/30/2013. This...

  15. Minnesota County Boundaries - lines

    Data.gov (United States)

    Minnesota Department of Natural Resources — Minnesota county boundaries derived from a combination of 1:24,000 scale PLS lines, 1:100,000 scale TIGER, 1:100,000 scale DLG, and 1:24,000 scale hydrography lines....

  16. Database of emission lines

    Science.gov (United States)

    Binette, L.; Ortiz, P.; Joguet, B.; Rola, C.

    1998-11-01

    A widely accessible data bank (available through Netscape) and consiting of all (or most) of the emission lines reported in the litterature is being built. It will comprise objects as diverse as HII regions, PN, AGN, HHO. One of its use will be to define/refine existing diagnostic emission line diagrams.

  17. Analysis of Simulation Methods for Far-end Crosstalk Cancellation

    Directory of Open Access Journals (Sweden)

    P. Lafata

    2011-04-01

    Full Text Available The information capacity of current digital subscriber lines is limited mainly by a crosstalk in metallic cables. The influence of near-end crosstalk (NEXT can be well cancelled by frequency duplex method, but the elimination of far-end crosstalk (FEXT is not so easy. Therefore FEXT is the dominant source of disturbance in current digital subscriber lines (xDSL. One of the most promising solutions for far-end crosstalk cancellation is Vectored Discrete Multi-tone modulation (VDMT. For the testing of VDMT modulation efficiency it will be necessary to implement advanced methods for modeling of far-end crosstalk to obtain required predictions of the crosstalk behavior in a cable. The actual simple FEXT model is not very accurate and does not provide realistic results. That is why the new method for modeling of far-end crosstalk was developed and is presented in this paper. This advanced model is based on the capacitive and inductive unbalances between pairs in a cable and it also respects the cable’s internal structure. The results of the model are subsequently used for the simulation of VDMT modulation and its impact on the FEXT cancellation. These simulations are based on the estimations of transmission speed of VDSL2 lines with VDMT modulation.

  18. Glue-paste linings

    DEFF Research Database (Denmark)

    Fuster-López, Laura; Andersen, Cecil Krarup; Bouillon, Nicolas

    2017-01-01

    Glue-paste linings of (Western) canvas paintings have been performed with a variety of materials throughout history and are present in a very significant amount of artworks in collections in Europe and elsewhere. Cereal flours and animal glues were usually the main ingredients because they were...... processes of lined canvas paintings. The impact of cyclic relative humidity on the biological and physical stability of the laminate structure is reported. Carefully constructed mock-ups, simulating lined canvas paintings, were used to examine the effect of pest infestation, mould growth, mechanical damage...

  19. Transnationaliseringen af Maersk Line

    DEFF Research Database (Denmark)

    Sornn-Friese, Henrik

    2017-01-01

    Maersk Line er verdens førende containerrederi og blandt de mest betydningsfulde virksomheder i Danmark. Den globale førerposition blev opnået på relativt kort tid og var et resultat af rederiets beslutning i 1973 om at gå helhjertet ind i containerskibsfarten. Beslutningen blev startskuddet til...... Maersk Lines dybe internationalisering, hvor rederiet ændrede sig fra at være en overvejende danske virksomhed, der betjente internationale markeder, til at være en genuin transnational virksomhed. Med fokus på opbygningen af Maersk Lines globale organisation og særligt etableringen af egne kontorer i...

  20. Wood pole overhead lines

    CERN Document Server

    Wareing, Brian

    2005-01-01

    This new book concentrates on the mechanical aspects of distribution wood pole lines, including live line working, environmental influences, climate change and international standards. Other topics include statutory requirements, safety, profiling, traditional and probabilistic design, weather loads, bare and covered conductors, different types of overhead systems, conductor choice, construction and maintenance. A section has also been devoted to the topic of lightning, which is one of the major sources of faults on overhead lines. The book focuses on the effects of this problem and the strate

  1. Subscribe to Funding Alerts | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Fusce vehicula dolor arcu, sit amet blandit dolor mollis nec. Donec viverra eleifend lacus, vitae ullamcorper metus. Sed sollicitudin ipsum quis nunc sollicitudin ultrices. Donec euismod scelerisque ligula. Maecenas eu varius risus, eu aliquet arcu. Curabitur fermentum suscipit est, tin.

  2. Security of Publish/Subscribe Systems

    OpenAIRE

    Ion, Mihaela

    2013-01-01

    The increasing demand for content-centric applications has motivated researchers to rethink and redesign the way information is stored and delivered on the Internet. Increasingly, network traffic consists of content dissemination to multiple recipients. However, the host-centric architecture of the Internet was designed for point-to-point communication between two fixed endpoints. As a result, there is a mismatch between the current Internet architecture and current data or content-centric ap...

  3. Veterans Crisis Line

    Data.gov (United States)

    Department of Veterans Affairs — The caring responders at the Veterans Crisis Line are specially trained and experienced in helping Veterans of all ages and circumstances. Some of the responders are...

  4. MODIFIED METHOD OF LINES

    Directory of Open Access Journals (Sweden)

    Stankevich Anatoliy Nikolaevich

    2016-08-01

    Full Text Available The main idea of the method of solving multidimensional boundary problems is reduction of initial differential equations in partial derivatives to the system of ordinary differential equations. One-dimensional resolving equations allow extending the potential of the method of lines. Although efficient and highly-precise numerical methods have been developed for solution of one-dimensional and initial-boundary value problems their use is impossible in the method of lines. The author considers a new method of lines which is used in order to reduce the dimensionality of multidimensional problems of structural mechanics. The method is used for calculation of thick plates, plates of variable thickness, heterogeneous and multilayered plates. It is proposed to replace finite-difference relations by projection relations which will extend the potential of the method of lines and will allow using the method in the dynamic problems.

  5. Kansas Electric Transmission Lines

    Data.gov (United States)

    Kansas Data Access and Support Center — This data set is a digital representation of the EletcircTransmission lines for the State of Kansas as maintained by the Kansas Corporation Commission. Data is...

  6. Electric Power Transmission Lines

    Data.gov (United States)

    Department of Homeland Security — Transmission Lines are the system of structures, wires, insulators and associated hardware that carry electric energy from one point to another in an electric power...

  7. Superconducting metamaterial transmission line

    Science.gov (United States)

    Rouxinol, Francisco; Wang, Haozhi; Plourde, B. L. T.

    2014-03-01

    Left-handed metamaterials are artificial composite structures with unusual properties. Such systems have a wide range of potential applications in photonics. We are developing transmission lines composed of superconducting metamaterials using thin-film lumped circuit elements. Such structures allow for the possibility of generating novel transmission spectra with a high density of modes in some frequency ranges and stop-bands in others. We discuss possible couplings of these lines to superconducting qubits in circuit QED architectures.

  8. Creating product line architectures

    OpenAIRE

    Bayer, J.; Flege, O.; Gacek, C.

    2000-01-01

    The creation and validation of product line software architectures are inherently more complex than those of software architectures for single systems. This paper compares a process for creating and evaluating a traditional, one-of-a- kind software architecture with one for a reference software architecture. The comparison is done in the context of PuLSE-DSSA, a customizable process that integrates both product line architecture creation and evaluation.

  9. NLC Extraction Line Studies

    OpenAIRE

    Nosochkov, Y. M.; Raubenheimer, T. O.

    2001-01-01

    In this note, we briefly review the current lattice of the NLC extraction line which was designed for the nominal NLC beam parameters. Then we describe the beam parameters for the high luminosity option with larger beam disruption parameter and discuss its effect on beam loss in the extraction line. Finally, we present a summary of the optics study aimed at minimizing the beam loss with high disruption beams.

  10. On-Line and Off-Line Assessment of Metacognition

    Science.gov (United States)

    Saraç, Seda; Karakelle, Sema

    2012-01-01

    The study investigates the interrelationships between different on-line and off-line measures for assessing metacognition. The participants were 47 fifth grade elementary students. Metacognition was assessed through two off-line and two on-line measures. The off-line measures consisted of a teacher rating scale and a self-report questionnaire. The…

  11. Along the line

    DEFF Research Database (Denmark)

    Dinesen, Cort Ross

    2011-01-01

    Embarking on a work of art constitutes a reduction of information – because we grasp the diversity and plurality of the manifestations we encounter by abstracting them and transforming them into manageable concepts; as we do when we draw contour lines on the landscape – they are imaginary...... and invisible but an abstraction essential for noting a difference or marking a place on a map. In the same way, a stroke in a sketch or a line in the sand is a manifestation of our ability to draw a boundary that both includes and excludes information. Where the line makes the birth of an idea visible......, it expresses through movement our tendency to mark a difference by drawing attention to and enclosing a whole series of relations that confront our preconceived notions. It is in the process of transformation in which we reduce the complexity of how we work, and rethink our ideas anew by refining the very same...

  12. Draw the Line!

    DEFF Research Database (Denmark)

    Draw the Line! International Conference, Copenhagen 2008 Papers, proceedings and recommendations is the second publication of the international three year long project "Understanding Puzzles in the Gendered European Map" (UPGEM), which is financed by the European Commission. In this publication we...... present proceedings from the UPGEM conference "Draw the Line!" in Copenhagen May 2008. The proceedings include contributions by UPGEM researchers, conference speeches by other researchers, politicians and gender equality officers in which they relate their work and research with the research done in UPGEM...... in the national contexts (see Draw the Line! Universities as workplaces for male and female researchers in Europe and http://www.upgem.dk/ ). We have also identified and discussed three scientific cultures in physics across the national borders. We call these scientific cultures: Hercules, Caretakers and Worker...

  13. VT Digital Line Graph Railroads

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) This datalayer is comprised of major railroad lines for the state of Vermont. These railroad lines line up well along quadrangle boundaries, but...

  14. Software product lines

    OpenAIRE

    Cortés Verdín, María Karen

    2005-01-01

    A Software Product Line is a “set of software-intensive systems sharing a common, managed set of features that satisfy the specific needs of a particular market segment or mission and that are developed from a common set of core assets in a prescribed way”1. A software product line (or software product family) approach promotes planned and proactive reuse of core assets and architecture-centric development, achieving a substantial increment in product quality and a reduced time to market. Bec...

  15. BPL (Broadband Power Line)

    OpenAIRE

    Peralta, Arturo

    2010-01-01

    El mundo actual requiere cada vez más el estar conectados con la sociedad de la Información y el Conocimiento, esto demanda que en los hogares, lugares de turismo, trabajos, universidades, etcétera, se cuente con una conexión a Internet de Alta Velocidad, que además sea segura y confiable. En este documento se presenta las características más importantes de la tecnología BPL (Broadband Power Line) o PLC (Power Line Comunication), la cual permite brindar el servicio de Internet ...

  16. Absolute Poverty Lines

    DEFF Research Database (Denmark)

    Arndt, Channing; Mahrt, Kristi; Tarp, Finn

    2017-01-01

    ’ approach, employing multiple methods, is the best available mode for addressing these limitations. A first fundamental choice is whether to estimate an absolute poverty line at all. Consumption-based poverty metrics provide only a partial view into the welfare of individuals or households, which may or may...

  17. Bike Map Lines

    Data.gov (United States)

    Town of Chapel Hill, North Carolina — Chapel Hill Bike Map Lines from KMZ file.This data came from the wiki comment board for the public, not an “official map” showing the Town of Chapel Hill's plans or...

  18. Clamp Restrains Pressure Line

    Science.gov (United States)

    Aliberti, J. A.

    1982-01-01

    Safety restraint protects people and property if a high-pressure fitting fails. As long as pressure line remains attached at the fitting, clamp exerts essentially no force on hose. If fitting fails, force of fluid leaving free end of hose causes the cam on the clamp to compress hose with a positive locking action.

  19. Analysis of () Line Shape

    Indian Academy of Sciences (India)

    The line shape is also simulated by the Monte–Carlo method, the molecular dissociation contributes to 57% neutral atoms and 53% emission intensity in front of the limiter, and 85% neutral atoms and 82% emission intensity in front of the wall. The processes of atoms and molecules influence on the energy balance is ...

  20. Subjective poverty line definitions

    NARCIS (Netherlands)

    J. Flik; B.M.S. van Praag (Bernard)

    1991-01-01

    textabstractIn this paper we will deal with definitions of subjective poverty lines. To measure a poverty threshold value in terms of household income, which separates the poor from the non-poor, we take into account the opinions of all people in society. Three subjective methods will be discussed

  1. LEAR: antiproton extraction lines

    CERN Document Server

    Photographic Service

    1992-01-01

    Antiprotons, decelerated in LEAR to a momentum of 100 MeV/c (kinetic energy of 5.3 MeV), were delivered to the experiments in an "Ultra-Slow Extraction", dispensing some 1E9 antiprotons over times counted in hours. Beam-splitters and a multitude of beam-lines allowed several users to be supplied simultaneously.

  2. Automatic transmission line monitor

    Science.gov (United States)

    Parsons, W. E.; Richards, L. O.

    1971-01-01

    Monitor improves complex network reliability in computer data links and command transmission lines. System evaluates circuit performance against preselected criteria, identifies and stores data indicating out-of-tolerance conditions, conducts closed loop testing, and provides for operation under command of digital computer that determines restoration priorities.

  3. Drawing the Line

    DEFF Research Database (Denmark)

    Holm, Isak Winkel

    2016-01-01

    of judgement that distinguishes between the inside and outside of a political community, between citizens and zombies. Second, the chapter focuses on the rhetorics applied to draw the line between rights-bearers and the rightless. ‘Prophetic’ speech, echoing the language of the Old Testament prophets, is vital...

  4. Developing Green Line Products

    DEFF Research Database (Denmark)

    Muñoz-Marin, Ana Maria; Lassen, Astrid Heidemann; Poulsen, Søren Bolvig

    2011-01-01

    This publication is based on the Master thesis “User-driven ecoinnovation process: Towards the implementation of the Green product line at JELD-WEN” written by Ana Maria Muñoz-Marin as her Graduation Project for the MSc. Global Innovation Management degree. The company-based experiment was carried...

  5. America's Assembly Line

    DEFF Research Database (Denmark)

    Nye, David Edwin

    A social history of the assembly line, invented in 1913. Both praised as a boon to consumers and as a curse for workers, it has been satirized, imitated, and celebrated for 100 years. It has inspired fiction, comedy, cafeteria layouts, and suburban housing. It transformed industrial labor...

  6. Directed Line Liquids

    Science.gov (United States)

    Kamien, Randall David

    This thesis is devoted to the study of ensembles of dense directed lines. These lines are principally to be thought of as polymers, though they also have the morphology of flux lines in high temperature superconductors, strings of colloidal spheres in electrorheological fluids and the world lines of quantum mechanical bosons. We first study nematic polymers dissolved in a nematic solvent. We show that in the dense phase nematic polymers interacting directly through excluded volume and indirectly through nematic solvent fluctuations are, at long wavelengths, identical to nematic polymers in an isotropic solvent, interacting through, again, excluded volume as well as their nematic degrees of freedom. By including the effects of free ends we study ferro- and electrorheological fluids and finite chain length polymers. In the dilute phase, near the transition to the semi-dilute phase, a renormalization group treatment is performed, in the physical and critical dimension 3. For sufficiently dilute systems we find logarithmic corrections to polymer wandering, predicted by de Gennes. However, at higher densities, the logarithmic enhancement is suppressed, and the polymers execute conventional random walks along the preferred axis. We then study the isotropic to nematic transition in this same system of liquid-crystalline polymers. Using the replica technique introduced by de Gennes to study isotropic polymers, we formulate a fully isotropic theory of liquid-crystalline polymers dissolved in a liquid crystal matrix. The first order transition from isotropic to nematic ordering occurs, and leads to the original directed polymer theory previously studied. In agreement with physical expectations, the nematic ordering temperature is depressed by polymerization. Finally, we go back to directed systems, in this case directed by an explicit symmetry violation instead of spontaneously. We discuss how directed polymer melts, string-like formations in electrorheological and ferro

  7. Multiple Lines of Evidence

    Energy Technology Data Exchange (ETDEWEB)

    Amidan, Brett G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Venzin, Alexander M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bramer, Lisa M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-06-03

    This paper discusses the process of identifying factors that influence the contamination level of a given decision area and then determining the likelihood that the area remains unacceptable. This process is referred to as lines of evidence. These lines of evidence then serve as inputs for the stratified compliance sampling (SCS) method, which requires a decision area to be divided into strata based upon contamination expectations. This is done in order to focus sampling efforts more within stratum where contamination is more likely and to use the domain knowledge about these likelihoods of the stratum remaining unacceptable to buy down the number of samples necessary, if possible. Two different building scenarios were considered as an example (see Table 3.1). SME expertise was elicited concerning four lines of evidence factors (see Table 3.2): 1) amount of contamination that was seen before decontamination, 2) post-decontamination air sampling information, 3) the applied decontaminant information, and 4) the surface material. Statistical experimental design and logistic regression modelling were used to help determine the likelihood that example stratum remained unacceptable for a given example scenario. The number of samples necessary for clearance was calculated by applying the SCS method to the example scenario, using the estimated likelihood of each stratum remaining unacceptable as was determined using the lines of evidence approach. The commonly used simple random sampling (SRS) method was also used to calculate the number of samples necessary for clearance for comparison purposes. The lines of evidence with SCS approach resulted in a 19% to 43% reduction in total number of samples necessary for clearance (see Table 3.6). The reduction depended upon the building scenario, as well as the level of percent clean criteria. A sensitivity analysis was also performed showing how changing the estimated likelihoods of stratum remaining unacceptable affect the number

  8. A Quantitative Transmission Line Experiment

    Science.gov (United States)

    Johnston, D. C.; Silbernagel, B. G.

    1969-01-01

    Describes modifications of a commercially available strip-type transmission line, which makes possible reproducible measurements of standing waves on the line. Experimental data yield values for the characteristic impedance, phase velocity and line wavelength of radiation in the transmission line, and the dielectric constant of material in the…

  9. The Bicycle Assembly Line Game

    Science.gov (United States)

    Klotz, Dorothy

    2011-01-01

    "The Bicycle Assembly Line Game" is a team-based, in-class activity that helps students develop a basic understanding of continuously operating processes. Each team of 7-10 students selects one of seven prefigured bicycle assembly lines to operate. The lines are run in real-time, and the team that operates the line that yields the…

  10. Printed circuit dispersive transmission line

    Science.gov (United States)

    Ikezi, Hiroyuki; Lin-Liu, Yuh-Ren; DeGrassie, John S.

    1991-01-01

    A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other.

  11. Fuel line purging device

    Energy Technology Data Exchange (ETDEWEB)

    Hensel, R.J.

    1988-03-22

    In a fuel injection system for an internal combustion engine having a fuel pump communicating with a fuel tank and delivering pressurized fuel through a pressure line to a fuel injector, the improvement is described comprising purging means for purging gas, including air and vapor, from the system, comprising: a housing having an inlet communicating with the pressure line, and having an outlet; pressure responsive valve means in the housing movable between an open position permitting flow from the inlet to the outlet, and a closed position blocking flow from the inlet to the outlet; a first branch passage in the housing communicating between the inlet and one side of the valve means; a second branch passage in the housing communicating between the inlet and the other side of the valve means; restriction means in the second branch passage selected to provide a fuel pressure drop thereacross but not substantially dropping gas pressure thereacross.

  12. Adaptive method of lines

    CERN Document Server

    Saucez, Ph

    2001-01-01

    The general Method of Lines (MOL) procedure provides a flexible format for the solution of all the major classes of partial differential equations (PDEs) and is particularly well suited to evolutionary, nonlinear wave PDEs. Despite its utility, however, there are relatively few texts that explore it at a more advanced level and reflect the method''s current state of development.Written by distinguished researchers in the field, Adaptive Method of Lines reflects the diversity of techniques and applications related to the MOL. Most of its chapters focus on a particular application but also provide a discussion of underlying philosophy and technique. Particular attention is paid to the concept of both temporal and spatial adaptivity in solving time-dependent PDEs. Many important ideas and methods are introduced, including moving grids and grid refinement, static and dynamic gridding, the equidistribution principle and the concept of a monitor function, the minimization of a functional, and the moving finite elem...

  13. Draw the Line!

    DEFF Research Database (Denmark)

    present proceedings from the UPGEM conference "Draw the Line!" in Copenhagen May 2008. The proceedings include contributions by UPGEM researchers, conference speeches by other researchers, politicians and gender equality officers in which they relate their work and research with the research done in UPGEM......Draw the Line! International Conference, Copenhagen 2008 Papers, proceedings and recommendations is the second publication of the international three year long project "Understanding Puzzles in the Gendered European Map" (UPGEM), which is financed by the European Commission. In this publication we....... The UPGEM research has previously been published in national reports from each of the partner countries (Denmark, Estonia, Finland, Italy and Poland). In these individual national reports of universities as workplaces for male and female researchers we discuss scientific cultures in physics embedded...

  14. Drill string transmission line

    Science.gov (United States)

    Hall, David R.; Hall, Jr., H. Tracy; Pixton, David S.; Bradford, Kline; Fox, Joe

    2006-03-28

    A transmission line assembly for transmitting information along a downhole tool comprising a pin end, a box end, and a central bore traveling between the pin end and the box end, is disclosed in one embodiment of the invention as including a protective conduit. A transmission line is routed through the protective conduit. The protective conduit is routed through the central bore and the ends of the protective conduit are routed through channels formed in the pin end and box end of the downhole tool. The protective conduit is elastically forced into a spiral or other non-linear path along the interior surface of the central bore by compressing the protective conduit to a length within the downhole tool shorter than the protective conduit.

  15. Hydrogen Stark Broadened Brackett lines

    Directory of Open Access Journals (Sweden)

    C. Stehlé

    2010-01-01

    Full Text Available Stark-broadened lines of the hydrogen Brackett series are computed for the conditions of stellar atmospheres and circumstellar envelopes. The computation is performed within the Model Microfield Method, which includes the ion dynamic effects and makes the bridge between the impact limit at low density and the static limit at high density and in the line wings. The computation gives the area normalized line shape, from the line core up to the static line wings.

  16. Line managers as marketers.

    Science.gov (United States)

    Rynne, T J

    1986-09-01

    Many hospital administrators and boards of directors, having overcome their initial opposition to advertising and hired a marketing professional, are wondering why their marketing programs have not accomplished all that they had hoped. The answer lies in their perception of who is responsible for marketing. Marketing is not a specialty separate from the disciplines of management--it is a basic management skill. Its goal is to satisfy the customer by providing products and services that meet the customer's needs, wants, and preferences. Line managers must understand the hospital's customers and make the critical day-to-day differences in satisfying them. They are the hospital's front-line marketers, and the marketing department's role is to support them in this function. The marketing department should develop the line managers' marketing skills by furnishing them with the appropriate tools: formats, models, examples, and instructions. In addition, the marketing staff should provide such specialized services as marketing research, ad agency management, and development of communications.

  17. LINE BALANCING IN SERVICES

    Directory of Open Access Journals (Sweden)

    Hadi GÖKÇEN

    2002-01-01

    Full Text Available This paper investigates how the Assembly Line Balancing (ALB methods known for the production systems can be applied in service systems. For this purpose, an application study is done in a Physical therapy and rehabilitation clinic. Each standart service provided to patients is taken into consideration as a product, and problem is solved as a mixed model ALB problem. In conclusion, it is seen that the ALB methods developed for the production systems are also applicable in service systems. So, it is possible to do similar studies at hospitals, tax offices, driving licence and passport offices, fast food restaurants, etc.

  18. America's Assembly Line

    DEFF Research Database (Denmark)

    Nye, David Edwin

    A social history of the assembly line, invented in 1913. Both praised as a boon to consumers and as a curse for workers, it has been satirized, imitated, and celebrated for 100 years. It has inspired fiction, comedy, cafeteria layouts, and suburban housing. It transformed industrial labor...... and provoked strikes and union drives in the 1930s, but became a symbol of victory in the Second World War and Cold War. Reinvented by Japan as "lean production" and then increasingly automated after 1990, it remains a cornerstone of production but no longer employs many workers, even as it evolves toward...

  19. From Off-line to On-line Handwriting Recognition

    NARCIS (Netherlands)

    Lallican, P.; Viard-Gaudin, C.; Knerr, S.

    2004-01-01

    On-line handwriting includes more information on time order of the writing signal and on the dynamics of the writing process than off-line handwriting. Therefore, on-line recognition systems achieve higher recognition rates. This can be concluded from results reported in the literature, and has been

  20. Strategic production line synchronisation

    Directory of Open Access Journals (Sweden)

    Hattingh, Teresa

    2016-08-01

    Full Text Available A study was conducted at the sole global producer of suspension struts for a particular vehicle manufacturer. This supplier is currently able to meet customer demand. However, it does so because of a large finished goods and work-in-progress (WIP inventory. The plant operates two production processes that are separated by a large buffer of WIP, which essentially decouples the production processes. This study aimed to reduce this WIP buffer; this would require the processes to become synchronised, bearing in mind that the reliability of delivery should not decrease. A tool that considers time, quality, and machine capacity was developed to assess the impact of line synchronisation on company performance figures. It was found that line synchronisation produced several benefits for the supplier, including batch size reduction, lower inventory levels, and associated shorter lead times. This further allowed the supplier to improve flow in the plant by introducing a pull system. Improved visual oversight could lead to further improved problem-solving and innovation.

  1. Central Venous Catheter (Central Line)

    Science.gov (United States)

    ... venous catheter (KATHeter), also known as a central line or CVC, is long, soft, thin, hollow tube ... into a large vein (blood vessel). A central line is much like an intravenous (IV) catheter that ...

  2. Credit Lines and Credit Utilization

    OpenAIRE

    Agarwal, Sumit; Ambrose, Brent W.; Liu, Chunlin

    2006-01-01

    While much is known about the characteristics of consumers or businesses that obtain credit lines, relatively little is known empirically about credit line utilization after origination. This study fills that gap by testing two interrelated hypotheses concerning borrower credit quality and credit line utilization. The empirical analysis confirms that borrowers with higher expectations of future credit quality deterioration originate credit lines to preserve financial flexibility. Furthermore,...

  3. China's Bilateral Currency Swap Lines

    OpenAIRE

    Zhitao, Lin; Wenjie, Zhan; Cheung, Yin-Wong

    2016-01-01

    We study the determinants of China’s bilateral local currency swap lines that were established since the recent global finance crisis. It is found that economic factors, political considerations, and institutional characteristics including trade intensity, economic size, strategic partnership, free trade agreement, corruption, and stability affect the decision of signing a swap line agreement. Once a swap line agreement decision is made, the size of the swap line is then mainly affected by tr...

  4. Software Product Lines : Three Examples

    OpenAIRE

    2000-01-01

    This report presents the results of a course on software product lines. The assignment in the course was to develop a software product line. . During the course, the students had to develop the following artifacts in groups: product line architecture, component designs, product derivations, modifiability assessment and a prototype. The results of the course are described in this report

  5. The Median-Median Line

    Science.gov (United States)

    Wilson, David C.

    2010-01-01

    Graphing bivariate data in a scatter plot and drawing an approximate line of best fit for the data have become commonly recommended activities for middle school and high school students. The graphing calculator has provided a mechanism for students both to approximate a best-fit line and to calculate the best-fit line using a built-in option. Two…

  6. Wideband VHF radio channel modelling and characterisation beyond line-or-sight.

    OpenAIRE

    Feramez, Michael

    2017-01-01

    The dawn of the information age brought to light technical and economic challenges in delivering broadband telecommunication services to subscribers in rural and remote areas; challenges created by tiny pockets of subscribers scattered over a vast network service area. Dealing with such challenges calls for an appropriate system engineering approach and the utilisation of suitable network building blocks, which could differ significantly from those of the urban areas. The aim of this thesis, ...

  7. Lines of landscape organisation

    DEFF Research Database (Denmark)

    Løvschal, Mette

    2015-01-01

    This paper offers a landscape analysis of the earliest linear landscape boundaries on Skovbjerg Moraine, Denmark, during the first millennium BC. Using Delaunay triangulation as well as classic distribution analyses, it demonstrates that landscape boundaries articulated already established use......-patterns close to roads, but also intercepted the central lines of movement and conflicted with previous ways of organizing the landscape. This development is interpreted as a different form of large-scale landholding, in which livestock possibly played a dominant role and boundaries were used to confiscate land...... in the zones bordering suitable pastures. This situation shows obvious parallels with southern Britain centuries earlier. It is discussed how the study of these physical boundaries provides new insights into the organization of pre-Roman landscapes, not only demonstrating a continuing engagement with landscape...

  8. Similarity law for Widom lines and coexistence lines

    Science.gov (United States)

    Banuti, D. T.; Raju, M.; Ihme, M.

    2017-05-01

    The coexistence line of a fluid separates liquid and gaseous states at subcritical pressures, ending at the critical point. Only recently, it became clear that the supercritical state space can likewise be divided into regions with liquidlike and gaslike properties, separated by an extension to the coexistence line. This crossover line is commonly referred to as the Widom line, and is characterized by large changes in density or enthalpy, manifesting as maxima in the thermodynamic response functions. Thus, a reliable representation of the coexistence line and the Widom line is important for sub- and supercritical applications that depend on an accurate prediction of fluid properties. While it is known for subcritical pressures that nondimensionalization with the respective species critical pressures pcr and temperatures Tcr only collapses coexistence line data for simple fluids, this approach is used for Widom lines of all fluids. However, we show here that the Widom line does not adhere to the corresponding states principle, but instead to the extended corresponding states principle. We resolve this problem in two steps. First, we propose a Widom line functional based on the Clapeyron equation and derive an analytical, species specific expression for the only parameter from the Soave-Redlich-Kwong equation of state. This parameter is a function of the acentric factor ω and compares well with experimental data. Second, we introduce the scaled reduced pressure pr* to replace the previously used reduced pressure pr=p /pcr . We show that pr* is a function of the acentric factor only and can thus be readily determined from fluid property tables. It collapses both subcritical coexistence line and supercritical Widom line data over a wide range of species with acentric factors ranging from -0.38 (helium) to 0.34 (water), including alkanes up to n-hexane. By using pr*, the extended corresponding states principle can be applied within corresponding states principle

  9. 76 FR 51367 - China Shipping Container Lines Co., Ltd.; COSCO Container Lines Company Limited; Evergreen Line A...

    Science.gov (United States)

    2011-08-18

    ... China Shipping Container Lines Co., Ltd.; COSCO Container Lines Company Limited; Evergreen Line A Joint Service Agreement; Hanjin Shipping Co., Ltd.; Horizon Lines, LLC; Kawasaki Kisen Kaisha, Ltd.; Nippon... Container Lines Co., Ltd.; COSCO Container Lines Company Limited; Evergreen Line A Joint Service Agreement...

  10. Bipolar pulse forming line

    Science.gov (United States)

    Rhodes, Mark A.

    2008-10-21

    A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  11. Alternate Double Single Track Lines

    Energy Technology Data Exchange (ETDEWEB)

    Moraga Contreras, P.; Grande Andrade, Z.; Castillo Ron, E.

    2016-07-01

    The paper discusses the advantages and shortcomings of alternate double single track (ADST) lines with respect to double track lines for high speed lines. ADST lines consists of sequences of double and single track segments optimally selected in order to reduce the construction and maintenance costs of railway lines and to optimize the timetables used to satisfy a given demand. The single tracks are selected to coincide with expensive segments (tunnels and viaducts) and the double tracks are chosen to coincide with flat areas and only where they are necessary. At the same time, departure times are adjusted for trains to cross at the cheap double track segments. This alternative can be used for new lines and also for existing conventional lines where some new tracks are to be constructed to reduce travel time (increase speed). The ADST proposal is illustrated with some examples of both types (new lines and where conventional lines exist), including the Palencia-Santander, the Santiago-Valparaíso-Viña del Mar and the Dublin-Belfast lines, where very important reductions (90 %) are obtained, especially where a railway infrastructure already exist. (Author)

  12. Signal Transmission on Power Lines

    DEFF Research Database (Denmark)

    Dalby, Arne Brejning

    1997-01-01

    coupled transmission line circuits like power line circuits, is based on finding the eigenvalues and eigenvectors for the matrix ZY, where Z and Y are the impedance- and admittance matrices for the coupled lines in W/m and S/m. In this paper a flow-graph representation of the relations beween voltage......- and current-vectors is presented for a general coupled line circuit. This flow-graph can be used to find any transfer function on a multiple coupled lossy transmission line circuit. In some cases, however, it is difficult to find the eigenvalues correctly. A correct analysis can thus not be made......In the analysis of power-line networks over a large frequency span, the time-domain method used in programs like EMTP (Electromagnetic Time domain Program) can not be used. A more rigorous analysis method must be employed. The correct analysis method (assuming TEM-mode propagation) for multiple...

  13. Testing in Software Product Lines

    OpenAIRE

    Odia, Osaretin Edwin

    2007-01-01

    This thesis presents research aimed at investigating different activities involved in software product lines testing process and possible improvements towards achieving developing high quality software product lines at reduced cost and time. The research was performed using systematic review procedures of Kitchenham. The reviews carried out in this research covers several areas relating to software product lines testing. The reasons for performing a systematic review in this research are to; ...

  14. Fractions, Number Lines, Third Graders

    Science.gov (United States)

    Cramer, Kathleen; Ahrendt, Sue; Monson, Debra; Wyberg, Terry; Colum, Karen

    2017-01-01

    The Common Core State Standards for Mathematics (CCSSM) (CCSSI 2010) outlines ambitious goals for fraction learning, starting in third grade, that include the use of the number line model. Understanding and constructing fractions on a number line are particularly complex tasks. The current work of the authors centers on ways to successfully…

  15. Marine line fish research programme

    CSIR Research Space (South Africa)

    SANCOR

    1979-04-01

    Full Text Available This report outlines the framework for a marine line fish programme under the aegis of the South African National Committee for Oceanographic Research (SANCOR). An attempt is made to assess the state of knowledge about South African marine line...

  16. relline: Relativistic line profiles calculation

    Science.gov (United States)

    Dauser, Thomas

    2015-05-01

    relline calculates relativistic line profiles; it is compatible with the common X-ray data analysis software XSPEC (ascl:9910.005) and ISIS (ascl:1302.002). The two basic forms are an additive line model (RELLINE) and a convolution model to calculate relativistic smearing (RELCONV).

  17. Drops, contact lines, and electrowetting

    NARCIS (Netherlands)

    't Mannetje, Dieter

    2013-01-01

    In this work, we study the behaviour of drops and contact lines under the influence of electric fields, and how these can answer fundamental and industrial questions. Our focus is on studying the varying balance of the electric field, hysteresis forces and inertia as the speed of a contact line

  18. A transmission line phase stabilizer

    Science.gov (United States)

    Lutes, G. F.

    1979-01-01

    To meet the phase stability requirements of certain experiments performed with the Deep Space Network, transmission lines carrying reference signals must be stabilized to reduce changes in their electrical length due to mechanical movement or changes in ambient temperature. A transmission line phase stabilizer being developed at JPL to perform this function is described.

  19. What was the Assembly Line?

    DEFF Research Database (Denmark)

    Nye, David

    2010-01-01

    The assembly line is still evolving a century after its invention, and it was not a distinct historical stage, nor was it part of an inevitable sequence that followed "Taylorism."......The assembly line is still evolving a century after its invention, and it was not a distinct historical stage, nor was it part of an inevitable sequence that followed "Taylorism."...

  20. US line-ups outperform UK line-ups.

    Science.gov (United States)

    Seale-Carlisle, Travis M; Mickes, Laura

    2016-09-01

    In the USA and the UK, many thousands of police suspects are identified by eyewitnesses every year. Unfortunately, many of those suspects are innocent, which becomes evident when they are exonerated by DNA testing, often after having been imprisoned for years. It is, therefore, imperative to use identification procedures that best enable eyewitnesses to discriminate innocent from guilty suspects. Although police investigators in both countries often administer line-up procedures, the details of how line-ups are presented are quite different and an important direct comparison has yet to be conducted. We investigated whether these two line-up procedures differ in terms of (i) discriminability (using receiver operating characteristic analysis) and (ii) reliability (using confidence-accuracy characteristic analysis). A total of 2249 participants watched a video of a crime and were later tested using either a six-person simultaneous photo line-up procedure (USA) or a nine-person sequential video line-up procedure (UK). US line-up procedure yielded significantly higher discriminability and significantly higher reliability. The results do not pinpoint the reason for the observed difference between the two procedures, but they do suggest that there is much room for improvement with the UK line-up.

  1. Fibrillary lines in overnight orthokeratology.

    Science.gov (United States)

    Lum, Edward; Swarbrick, Helen

    2007-07-01

    This case report describes the appearance of fibrillary lines in the anterior stroma of a 39-year-old Asian woman wearing overnight orthokeratology (OK) lenses. The fibrillary lines were fine, slightly curved and sub-epithelial, arranged in a band-like annulus in the corneal mid-periphery. The lines were not associated with epithelial staining, although a marked Fischer-Schweitzer corneal mosaic was noted after blinking. Fibrillary lines are a relatively common finding in normal and keratoconic corneas and have been reported previously accompanying OK lens wear. Their origin is unknown and epithelial neural remodelling, corneal biomechanical stress and abrupt corneal curvature changes have been suggested as contributing factors. The appearance of fibrillary lines in our OK patient had no adverse consequences on vision or ocular health, at least in the medium term.

  2. Formación on line On line learning

    Directory of Open Access Journals (Sweden)

    O. Grau-Perejoan

    2008-09-01

    Full Text Available La formación on line es una modalidad de enseñanza a distancia basada en las nuevas tecnologías. En este artículo se pretende hacer una introducción a base de describir a grandes rasgos sus características principales: asincronía, no presencialidad, comunicación escrita, función del profesor on line, así como los retos, los riesgos, las ventajas y los inconvenientes que plantea. Se exponen las diferencias entre la formación on line y la formación presencial, de manera que los docentes puedan adaptar de la mejor manera posible sus propuestas formativas a la modalidad on line. Se introduce el importantísimo papel de la planificación y de la fase de diseño y, finalmente, se repasan conceptos útiles para comprender mejor el mundo de la formación on line como son los conceptos entorno virtual de aprendizaje (EVA o Blended Learning (B-Learning.On line learning is a type of distance education based on new technologies. This article's aim is to introduce its main characteristics -asynchrony, non-presentiality, written communication, e-teacher role- as well as its challenges, risks, advantages and limitations. Differences between on line learning and face-to-face learning are presented in order to enable educational professionals to adapt their courses to the on line methodology. Planning and designing are introduced as key phases and, finally, useful concepts such as Virtual Learning Environment (VLE or Blended Learning (B-Learning are reviewed in order to achieve a better understanding of the on line learning field.

  3. Cyclotron Line Measurements with INTEGRAL

    Science.gov (United States)

    Pottschmidt, K.; Kreykenbohm, I.; Caballero, I.; Fritz, S.; Schoenherr, G.; Kretschmar, P.; Wilms, J.; McBride, V. A.; Suchy, S.; Rothschild, R. E.

    2008-01-01

    Due to its broadband energy coverage, INTEGRAL has made important contributions to observing and interpreting cyclotron lines, which are present in the 10-100 keV range of a sample of accreting pulsars. In these systems photons with energies fulfilling the resonance condition inelastically Compton scatter off electrons quantized in the accretion column above the neutron star's magnetic pole(s). This process gives rise to the broad, absorption-like lines or 'cyclotron resonant scattering features' (CRSF). The observed lines allow to directly measure the B-fields of these sources, resulting in values of a few times 1E12G. In this overview I will present recent highlights regarding CRSF observations as well as discuss current ideas and models for the physical conditions in the accretion column. Among the former are the stability of the spectrum of Vela X-1 during giant flares in 2003, the observation of three cyclotron lines during the 2004 outburst of V0332+53, the confirmation of the fundamental line at approximately 45 keV during a 2005 normal outburst of A0535-26, and the simultaneous detection of the two lines in the dipping source 4U 1907+09 (for which also a torque reversal was detected for the first time). Through these and other observations it has become increasingly apparent that two types of observations can potentially be used to constrain the accretion column geometry: the determination of energy ratios for multiple harmonic lines (only two sources with greater than 2 lines are known), was well as the evolution of the fundamental line centroid, which, for different sources, may or may not be correlated with flux. Furthermore, first steps have been taken away from the usual phenomenological description of the lines, towards a physical approach based on self-consistent CRSF modeling. Initial applications are presented.

  4. Efficient high speed communications over electrical powerlines for a large number of users

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J.; Tripathi, K.; Latchman, H.A. [Florida Univ., Gainesville, FL (United States). Dept. of Electrical and Computer Engineering

    2007-07-01

    Affordable broadband Internet communication is currently available for residential use via cable modem and other forms of digital subscriber lines (DSL). Powerline communication (PLC) systems were never considered seriously for communications due to their low speed and high development cost. However, due to technological advances PLCs are now spreading to local area networks and broadband over power line systems. This paper presented a newly proposed modification to the standard HomePlug 1.0 MAC protocol to make it a constant contention window-based scheme. The HomePlug 1.0 was developed based on orthogonal frequency division multiplexing (OFDM) and carrier sense multiple access with collision avoidance (CSMA/CA). It is currently the most commonly used technology of power line communications, supporting a transmission rate of up to 14 Mbps on the power line. However, the throughput performance of this original scheme becomes critical when the number of users increases. For that reason, a constant contention window based medium access control protocol algorithm of HomePlug 1.0 was proposed under the assumption that the number of active stations is known. An analytical framework based on Markov Chains was developed in order to model this modified protocol under saturation conditions. Modeling results accurately matched the actual performance of the system. This paper revealed that the performance can be improved significantly if the variables were parameterized in terms of the number of active stations. 15 refs., 1 tab., 6 figs.

  5. Teaching Braille Line Tracking Using Stimulus Fading

    Science.gov (United States)

    Scheithauer, Mindy C.; Tiger, Jeffrey H.

    2014-01-01

    Line tracking is a prerequisite skill for braille literacy that involves moving one's finger horizontally across a line of braille text and identifying when a line ends so the reader may reset his or her finger on the subsequent line. Current procedures for teaching line tracking are incomplete, because they focus on tracking lines with only…

  6. Atlas transmission line breakdown analysis

    CERN Document Server

    Nielsen, K E; Ballard, E O; Elizondo, J M; Gribble, R F; McCuistian, B T; Parsons, W M

    1999-01-01

    The Atlas facility will use 24 radially converging, vertically oriented and tapered, oil insulated, triplate transmission lines between the Marx generators and the central load region. Among the requirements of the transmission lines are low inductance and high reliability. The inter-conductor gap is nominally 2 cm and the lines taper from a height of 1.75 m at the Marx end to 0.32 m at the output end. The aluminum conductors, held together by 20 insulating spacers, are assembled and inserted as a unit into radial oil-filled steel tanks. The negative, high-voltage, center conductor is 2.54-cm thick and the outer ground conductors are 1.59-cm thick. All 24 triplate transmission lines connect to a transition section at near 1 m radius that couples the transmission lines to a disk/conical solid- dielectric-insulated power flow channel transmission line terminating at the load. Peak operating voltage on the lines can be as high as 240 kV with an effective stress time of 0.8 mu s. Testing of small sections of the ...

  7. Emission-Line Region Variability

    Science.gov (United States)

    Peterson, Bradley M.

    We propose to obtain simultaneous optical and ultraviolet observations of the rapidly varying active galaxies Akn 120 and 3C 120. Both these sources are distinguished by short-time scale variations in their continuum and broadline fluxes, and we intend to exploit this property to determine fundamental characteristics of the emission-line gas. Akn 120 has been studied extensively by the Ohio State group, and is one of the few active galaxies for which a reliable upper limit for the separation between the continuum source and the emission-line clouds has been established from reverberation measurements. The important goals of the proposed project are (1) to provide a suitable database of optical and ultraviolet broad-line flux measurements obtained during different continuum states and (2) to compare the temporal behavior of optical and ultraviolet emission lines. In particular, we wish to determine whether or not C III] A1909 varies on the same time scale as the Balmer lines and how much of the flux in this feature can actually be ascribed to broad-line emission from C^+2. These data will enable us to make a differential comparison with predictions of photoionization models, since the emission-line spectrum will change in response to the variable ionizing continuum flux. Such a differential comparison between observation and theory should be more reliable than attempts to match absolute intensities because errors in the atomic data base should tend to cancel out.

  8. Transmission-Line Metamaterials, Bianisotropy, and Transmission-Line Bianisotropy

    OpenAIRE

    Vehmas, Joni

    2015-01-01

    Electromagnetic metamaterials are artificial composite materials which possess exotic and advantageous properties not attainable with natural materials. This thesis covers two notable classes of metamaterials: transmission-line metamaterials and bianisotropic media. While metamaterials are most commonly realized as bulk media consisting of small resonant inclusions, transmission-line structures offer an alternative, low-dispersion and low-loss way for realizing them. Bianisotropic media, on t...

  9. Pulse shaping with transmission lines

    Science.gov (United States)

    Wilcox, Russell B.

    1987-01-01

    A method and apparatus for forming shaped voltage pulses uses passive reflection from a transmission line with nonuniform impedance. The impedance of the reflecting line varies with length in accordance with the desired pulse shape. A high voltage input pulse is transmitted to the reflecting line. A reflected pulse is produced having the desired shape and is transmitted by pulse removal means to a load. Light activated photoconductive switches made of silicon can be utilized. The pulse shaper can be used to drive a Pockels cell to produce shaped optical pulses.

  10. The infinite line pressure probe

    Science.gov (United States)

    Englund, D. R.; Richards, W. B.

    1985-01-01

    The infinite line pressure probe provides a means for measuring high frequency fluctuating pressures in difficult environments. A properly designed infinite line probe does not resonate; thus its frequency response is not limited by acoustic resonance in the probe tubing, as in conventional probes. The characteristics of infinite line pressure probes are reviewed and some applications in turbine engine research are described. A probe with a flat-oval cross section, permitting a constant-impedance pressure transducer installation, is described. Techniques for predicting the frequency response of probes with both circular and flat-oval cross sections are also cited.

  11. Electrical transmission line diametrical retainer

    Science.gov (United States)

    Hall, David R.; Hall, Jr., H. Tracy; Pixton, David; Dahlgren, Scott; Sneddon, Cameron; Briscoe, Michael; Fox, Joe

    2004-12-14

    The invention is a mechanism for retaining an electrical transmission line. In one embodiment of the invention it is a system for retaining an electrical transmission line within down hole components. In accordance with one aspect of the invention, the system includes a plurality of downhole components, such as sections of pipe in a drill string. The system also includes a coaxial cable running between the first and second end of a drill pipe, the coaxial cable having a conductive tube and a conductive core within it. The invention allows the electrical transmission line to with stand the tension and compression of drill pipe during routine drilling cycles.

  12. VT Senate Districts 1992 - lines

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The senatorial district designations for this layer were taken from a trace map of unknown origin. A visual compilation of the traced lines and...

  13. Louisiana ESI: ROADS (Road Lines)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the state maintained primary and secondary road network of Louisiana. Vector lines in the data set represent Interstates, U.S. Highways, and...

  14. Horizontal and Vertical Line Designs.

    Science.gov (United States)

    Johns, Pat

    2003-01-01

    Presents an art lesson in which students learn about the artist Piet Mondrian and create their own abstract artworks. Focuses on geometric shapes using horizontal and vertical lines. Includes background information about the artist. (CMK)

  15. Digital Line Graph - Large Scale

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Digital line graph (DLG) data are digital representations of cartographic information. DLGs of map features are converted to digital form from maps and related...

  16. Composite Materials in Overhead Lines

    DEFF Research Database (Denmark)

    Sørensen, Thomas Kjærsgaard; Holbøll, Joachim

    2009-01-01

    The use of composite materials, e.g. fibreglass materials, in overhead transmission line systems is nothing new. Composite based insulators have been applied to transmission lines for over 30 years, mainly as suspension and post insulators and often as an option for special applications. Also...... towers and recently conductors based on composite materials are available at transmission levels. In this paper it is investigated which composite based solutions are available in connection with complete overhead line systems including insulators, towers and conductors. The components are reviewed...... with respect to solved and persisting known failures/problems of both mechanical and electrical nature. Major challenges related to extensive use of composite materials in an overhead line system are identified, as are possible benefits - both when using standard as well as customised composite components, e...

  17. Umbilic Lines in Orientational Order

    Directory of Open Access Journals (Sweden)

    Thomas Machon

    2016-03-01

    Full Text Available Three-dimensional orientational order in systems whose ground states possess nonzero gradients typically exhibits linelike structures or defects: λ lines in cholesterics or Skyrmion tubes in ferromagnets, for example. Here, we show that such lines can be identified as a set of natural geometric singularities in a unit vector field, the generalization of the umbilic points of a surface. We characterize these lines in terms of the natural vector bundles that the order defines and show that they give a way to localize and identify Skyrmion distortions in chiral materials—in particular, that they supply a natural representative of the Poincaré dual of the cocycle describing the topology. Their global structure leads to the definition of a self-linking number and helicity integral which relates the linking of umbilic lines to the Hopf invariant of the texture.

  18. Control Point Generated PLS - lines

    Data.gov (United States)

    Minnesota Department of Natural Resources — The Control Point Generated PLS layer contains line and polygon features to the 1/4 of 1/4 PLS section (approximately 40 acres) and government lot level. The layer...

  19. Fractional Transmission Line with Losses

    Science.gov (United States)

    Gómez-Aguilar, José Francisco; Dumitru, Baleanu

    2014-11-01

    In this manuscript, the fractional transmission line with losses is presented. The order of the Caputo derivative is considered as 0 Mittag-Leffler functions. The classic cases are recovered when β and γ are equal to 1.

  20. Program of telluric lines monitoring

    Directory of Open Access Journals (Sweden)

    Vince I.

    2006-01-01

    Full Text Available A new observational program of telluric lines monitoring was introduced at Belgrade Astronomical Observatory. The ultimate goal of this program is to investigate the properties of Earth’s atmosphere through modeling the observed profiles of telluric lines. The program is intend to observe infrared molecular oxygen lines that were selected according to spectral sensitivity of the available CCD camera. In this paper we give the initial and the final selection criteria for spectral lines included in the program the description of equipment and procedures used for observations and reduction, a review of preliminary observational results with the estimated precision, and a short discussion on the comparison of the theoretical predictions and the measurements.

  1. Transmission line model for nanoelectronics

    Directory of Open Access Journals (Sweden)

    Nelin E. A.

    2009-08-01

    Full Text Available Analytical expressions for resonant parametres and characteristics of typical barrier nanoelectronic structures have been received on the basis of the transmission line model. Characteristics illustrating the efficiency of such approach are presented in the article.

  2. Railroad Lines, US, 2015, NAVTEQ

    Data.gov (United States)

    U.S. Environmental Protection Agency — NAVTEQ Railroads for the United States. The Railroads layer contains Railroad features published as lines and polylines. Attributes for this layer include the name...

  3. Base Flood Elevation (BFE) Lines

    Data.gov (United States)

    Department of Homeland Security — The Base Flood Elevation (BFE) table is required for any digital data where BFE lines will be shown on the corresponding Flood Insurance Rate Map (FIRM). Normally if...

  4. Radio and line transmission 2

    CERN Document Server

    Roddy, Dermot

    2013-01-01

    Radio and Line Transmission, Volume 2 gives a detailed treatment of the subject as well as an introduction to additional advanced subject matter. Organized into 14 chapters, this book begins by explaining the radio wave propagation, signal frequencies, and bandwidth. Subsequent chapters describe the transmission lines and cables; the aerials; tuned and coupled circuits; bipolar transistor amplifiers; field-effect transistors and circuits; thermionic valve amplifiers; LC oscillators; the diode detectors and modulators; and the superheterodyne receiver. Other chapters explore noise and interfere

  5. ESR powder line shape calculations

    Energy Technology Data Exchange (ETDEWEB)

    Vitko, J. Jr.; Huddleston, R.E.

    1976-05-01

    A program has been developed for computing the ESR spectrum of a collection of randomly oriented spins subject only to an electronic Zeeman interaction and having a Lorentzian single crystal line shape. Other single crystal line shapes, including numerical solutions of the Bloch equations, can be accommodated with minor modifications. The program differs in several features from those existing elsewhere, thus enabling one to study saturation effects, over-modulation effects, both absorptive and dispersive signals, and second and higher order derivative signals.

  6. Maria Reiche's Line to Archaeoastronomy

    OpenAIRE

    Sparavigna, Amelia Carolina

    2013-01-01

    Maria Reiche was a German mathematician and archaeologist that, from 1940, devoted her life to the study of the Nazca Lines, the most famous Peruvian geoglyphs, gaining recognition and preservation of them. Created by removing the upper most layer of the arid soil of the Nazca desert, these geoglyphs, declared in 1995 a UNESCO World Heritage Site, are composed by very long straight and trapezoidal lines, spirals and large figures representing animals. Maria Reiche, in fact an archaeoastronome...

  7. Double helix nodal line superconductor

    OpenAIRE

    Sun, Xiao-Qi; Lian, Biao; Zhang, Shou-Cheng

    2017-01-01

    Time-reversal invariant superconductors in three dimensions may contain nodal lines in the Brillouin zone, which behave exactly as Wilson loops of 3d momentum-space Chern-Simons theory of the Berry connection. Here we study the conditions of realizing linked nodal lines (Wilson loops), which yield a topological contribution to the thermal magnetoelectric coefficient that is given by the Chern-Simons action. We find the essential conditions are the existence of torus or higher genus fermi surf...

  8. Line-by-line spectroscopic simulations on graphics processing units

    Science.gov (United States)

    Collange, Sylvain; Daumas, Marc; Defour, David

    2008-01-01

    We report here on software that performs line-by-line spectroscopic simulations on gases. Elaborate models (such as narrow band and correlated-K) are accurate and efficient for bands where various components are not simultaneously and significantly active. Line-by-line is probably the most accurate model in the infrared for blends of gases that contain high proportions of H 2O and CO 2 as this was the case for our prototype simulation. Our implementation on graphics processing units sustains a speedup close to 330 on computation-intensive tasks and 12 on memory intensive tasks compared to implementations on one core of high-end processors. This speedup is due to data parallelism, efficient memory access for specific patterns and some dedicated hardware operators only available in graphics processing units. It is obtained leaving most of processor resources available and it would scale linearly with the number of graphics processing units in parallel machines. Line-by-line simulation coupled with simulation of fluid dynamics was long believed to be economically intractable but our work shows that it could be done with some affordable additional resources compared to what is necessary to perform simulations on fluid dynamics alone. Program summaryProgram title: GPU4RE Catalogue identifier: ADZY_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADZY_v1_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 62 776 No. of bytes in distributed program, including test data, etc.: 1 513 247 Distribution format: tar.gz Programming language: C++ Computer: x86 PC Operating system: Linux, Microsoft Windows. Compilation requires either gcc/g++ under Linux or Visual C++ 2003/2005 and Cygwin under Windows. It has been tested using gcc 4.1.2 under Ubuntu Linux 7.04 and using Visual C

  9. Towards Perfect Water Line Intensities

    Science.gov (United States)

    Lodi, L.; Tennyson, J.

    2012-06-01

    Over the last ten years the increased availability of computational resources and the steady refinement of theoretical methods have permitted more and more accurate first principle calculations of water-vapor spectra as exemplified, e.g., by the very successful BT2 line list both line positions and intensities, a reliable dipole moment surface (DMS), affecting line intensities. It is also very useful to several application to give reasonable uncertainty bars for computed quantities, an aspect which traditionally has received little attention. We report here recent progress leading to very accurate room-temperature linelists covering the range 0.05-20 000 cm-1, complete with uncertainty bars, for the H_218O and H_217O water isotopologues Line intensities were produced using a recent DMS produced by our group which is capable of giving line intensites accurate to 1% for most medium and strong transitions. Line positions are based if possible on the experimentally derived energy levels recently produced by a IUPAC task group and have a typical accuracy of 0.0002 cm-1; when experimentally derived energy levels are unavailable calculated line position are provided, with an accuracy of the order of 0.2 cm-1. An extension to the main isotopologue H_216O is currently underway. R. J. Barber, J. Tennyson, G. J. Harris and R. N. Tolchenov, Mon. Not. R. Astron. Soc. {368}, 1087-1094 (2006). L. Lodi and J. Tennyson, J. Quant. Spectrosc. Radiat. Trans. (2012), doi:10.1016/j.jqsrt.2012.02.023 L. Lodi, J. Tennyson and O. L. Polyansky, J. Chem. Phys. {135}, 034113 (2011). J. Tennyson at al., J. Quant. Spectrosc. Radiat. Trans. {110}, 573-96 (2009).

  10. Enhanced incoherent scatter plasma lines

    Directory of Open Access Journals (Sweden)

    H. Nilsson

    Full Text Available Detailed model calculations of auroral secondary and photoelectron distributions for varying conditions have been used to calculate the theoretical enhancement of incoherent scatter plasma lines. These calculations are compared with EISCAT UHF radar measurements of enhanced plasma lines from both the E and F regions, and published EISCAT VHF radar measurements. The agreement between the calculated and observed plasma line enhancements is good. The enhancement from the superthermal distribution can explain even the very strong enhancements observed in the auroral E region during aurora, as previously shown by Kirkwood et al. The model calculations are used to predict the range of conditions when enhanced plasma lines will be seen with the existing high-latitude incoherent scatter radars, including the new EISCAT Svalbard radar. It is found that the detailed structure, i.e. the gradients in the suprathermal distribution, are most important for the plasma line enhancement. The level of superthermal flux affects the enhancement only in the region of low phase energy where the number of thermal electrons is comparable to the number of suprathermal electrons and in the region of high phase energy where the suprathermal fluxes fall to such low levels that their effect becomes small compared to the collision term. To facilitate the use of the predictions for the different radars, the expected signal- to-noise ratios (SNRs for typical plasma line enhancements have been calculated. It is found that the high-frequency radars (Søndre Strømfjord, EISCAT UHF should observe the highest SNR, but only for rather high plasma frequencies. The VHF radars (EISCAT VHF and Svalbard will detect enhanced plasma lines over a wider range of frequencies, but with lower SNR.

  11. TI1e Influence of TrailS Europe Lines Project on Telecommunications Development

    Directory of Open Access Journals (Sweden)

    Vladimir Brlić

    2012-10-01

    Full Text Available A multinational Project Trans Europe Lines (TEL is ofgreat importance for the present development as well as for thefuture role and situation of telecommunications in the cowl·tries of Central and Eastern Europe (CEE. The idea of the necessityof constructing a fibre optic (FO telecommunicationb1idge between Eastem and Westem Europe was initiated bythe Deutsche Bundespost Telekom and presented to some ofthe telecommunication administrations in that region in theyear 1990. The basic aim of the Project is to enable all countliesto improve and satisfY the telecommunication needs on internationaland national levels, to ensure sufficient transmissiontelecommunication infrastrncture in intemational traffic, toenable establishing of intense economic interrelations, to providethe basis for the development of future telecommunicationservices, and to support complete economic development in theCEE region.After its initialisation, the TEL Project was graduallyjoined by new Members and by the end of 1996 it included 16countries. Since initialisation until the end of 1996 TEL almosttripled in size regarding the physical area covered, and it becametwice as big regarding the involved number of inhabitants(potential subscribers.VarimLSt reasons were the "driving force" for the numerouscountries insufficiently developed in the field of telecommunicationsand involved in the Project (as, for example, for the Republicof Croatia, in which TEL strongly supported its telecommunicationsdevelopment in spite of the difficulties of the warperiod 1991-1995 in the country.Thanks to the FO cable transmission systems which havebeen or are still being built within the framework of the TELProject and which represent the infrastntcture for the true CEEinformation highway, in the field of telecommunications, theProject M embers are not only connected among themselves butalso with the whole world, since the direct access points to TELare at locations of numerous "landing points

  12. Line Transport in Turbulent Atmospheres

    Science.gov (United States)

    Nikoghossian, A. G.

    2017-07-01

    The spectral line transfer in turbulent atmospheres with a spatially correlated velocity field is examined. Both the finite and semi-infinite media are treated. In finding the observed intensities we first deal with the problem for determining the mean intensity of radiation emerging from the medium for a fixed value of turbulent velocity at its boundary. A new approach proposed for solving this problem is based on the invariant imbedding technique which yields the solution of the proper problems for a family of media of different optical thicknesses and allows tackling different kinds of inhomogeneous problems. The dependence of the line profile, integral intensity, and the line width on the mean correlation length and the average value of the hydrodynamic velocity is studied. It is shown that the transition from a micro-turbulent regime to a macro-turbulence occurs within a comparatively narrow range of variation in the correlation length . Ambartsumian's principle of invariance is used to solve the problem of diffuse reflection of the line radiation from a one-dimensional semi-infinite turbulent atmosphere. In addition to the observed spectral line profile, statistical averages describing the diffusion process in the atmosphere (mean number of scattering events, average time spent by a diffusing photon in the medium) are determined. The dependence of these quantities on the average hydrodynamic velocity and correlation coefficient is studied.

  13. World-line perturbation theory

    CERN Document Server

    van Holten, Jan-Willem

    2016-01-01

    The motion of a compact body in space and time is commonly described by the world line of a point representing the instantaneous position of the body. In General Relativity such a world-line formalism is not quite straightforward because of the strict impossibility to accommodate point masses and rigid bodies. In many situations of practical interest it can still be made to work using an effective hamiltonian or energy-momentum tensor for a finite number of collective degrees of freedom of the compact object. Even so exact solutions of the equations of motion are often not available. In such cases families of world lines of compact bodies in curved space-times can be constructed by a perturbative procedure based on generalized geodesic deviation equations. Examples for simple test masses and for spinning test bodies are presented.

  14. Double Helix Nodal Line Superconductor

    Science.gov (United States)

    Sun, Xiao-Qi; Lian, Biao; Zhang, Shou-Cheng

    2017-10-01

    Time-reversal invariant superconductors in three dimensions may contain nodal lines in the Brillouin zone, which behave as Wilson loops of 3D momentum-space Chern-Simons theory of the Berry connection. Here we study the conditions of realizing linked nodal lines (Wilson loops), which yield a topological contribution to the thermal magnetoelectric coefficient that is given by the Chern-Simons action. We find the essential conditions are the existence of torus or higher genus Fermi surfaces and spiral spin textures. We construct such a model with two torus Fermi surfaces, where a generic spin-dependent interaction leads to double-helix-like linked nodal lines as the superconductivity is developed.

  15. Animated construction of line drawings

    KAUST Repository

    Fu, Hongbo

    2011-12-01

    Revealing the sketching sequence of a line drawing can be visually intriguing and used for video-based storytelling. Typically this is enabled based on tedious recording of artists\\' drawing process. We demonstrate that it is often possible to estimate a reasonable drawing order from a static line drawing with clearly defined shape geometry, which looks plausible to a human viewer. We map the key principles of drawing order from drawing cognition to computational procedures in our framework. Our system produces plausible animated constructions of input line drawings, with no or little user intervention. We test our algorithm on a range of input sketches, with varying degree of complexity and structure, and evaluate the results via a user study. We also present applications to gesture drawing synthesis and drawing animation creation especially in the context of video scribing.

  16. Animated construction of line drawings

    KAUST Repository

    Fu, Hongbo

    2011-12-01

    Revealing the sketching sequence of a line drawing can be visually intriguing and used for video-based storytelling. Typically this is enabled based on tedious recording of artists\\' drawing process. We demonstrate that it is often possible to estimate a reasonable drawing order from a static line drawing with clearly defined shape geometry, which looks plausible to a human viewer. We map the key principles of drawing order from drawing cognition to computational procedures in our framework. Our system produces plausible animated constructions of input line drawings, with no or little user intervention. We test our algorithm on a range of input sketches, with varying degree of complexity and structure, and evaluate the results via a user study. We also present applications to gesture drawing synthesis and drawing animation creation especially in the context of video scribing. © 2011 ACM.

  17. Double Helix Nodal Line Superconductor.

    Science.gov (United States)

    Sun, Xiao-Qi; Lian, Biao; Zhang, Shou-Cheng

    2017-10-06

    Time-reversal invariant superconductors in three dimensions may contain nodal lines in the Brillouin zone, which behave as Wilson loops of 3D momentum-space Chern-Simons theory of the Berry connection. Here we study the conditions of realizing linked nodal lines (Wilson loops), which yield a topological contribution to the thermal magnetoelectric coefficient that is given by the Chern-Simons action. We find the essential conditions are the existence of torus or higher genus Fermi surfaces and spiral spin textures. We construct such a model with two torus Fermi surfaces, where a generic spin-dependent interaction leads to double-helix-like linked nodal lines as the superconductivity is developed.

  18. Rigidly connected magnetic lines: twisting and winding of magnetic lines

    Science.gov (United States)

    Prasad, G.

    2017-10-01

    The dynamical process of magnetic flux variation in a fluid's stream tube is described by constructing 1+1+ (2) decomposition of the gradient of fluid's 4-velocity. The necessary and sufficient conditions are obtained for a spacelike congruence to be a congruence of rigidly connected spacelike curves. The evolution of magnetic flux in a magnetic tube is explored under the assumptions that magnetic lines are rigidly connected and the chemical potential of the fluid is constant along a magnetic tube. The interplay between magnetic and stream tubes is demonstrated. It is shown that the growth of magnetic energy in a magnetic tube cannot exceed to that of a stream tube. It is found that the proper time variation of twist of magnetic lines is caused by gravitation inside a neutron star if magnetic lines are rigidly connected and charge neutrality condition holds. Helmholtz-like magnetic vorticity flux conservation in a magnetic tube constituted by rigidly connected geodetic magnetic lines is derived under the assumption that the charge neutrality condition holds. It is shown that the winding of frozen-in poloidal magnetic field due to differential rotation requires meridional circulation in an axisymmetric stationary hydromagnetic configuration.

  19. Assembly line performance and modeling

    Science.gov (United States)

    Rane, Arun B.; Sunnapwar, Vivek K.

    2017-03-01

    Automobile sector forms the backbone of manufacturing sector. Vehicle assembly line is important section in automobile plant where repetitive tasks are performed one after another at different workstations. In this thesis, a methodology is proposed to reduce cycle time and time loss due to important factors like equipment failure, shortage of inventory, absenteeism, set-up, material handling, rejection and fatigue to improve output within given cost constraints. Various relationships between these factors, corresponding cost and output are established by scientific approach. This methodology is validated in three different vehicle assembly plants. Proposed methodology may help practitioners to optimize the assembly line using lean techniques.

  20. Line locking and SS 433

    Science.gov (United States)

    Pekarevich, M.; Piran, T.; Shaham, J.

    1984-01-01

    The general problem of acceleration by line locking in an optically thin medium is considered. Analytic solutions to the coupled equations of radiation transfer and matter motion are presented. Using these solutions, restrictions on the physical conditions of the accelerated matter are derived. By applying these conditions to SS 433, it is found that if the absorbing ion is light (hydrogen or helium), the matter must be highly clumped, and the acceleration has to begin at approximately 10 to the 12th cm. Line-locking acceleration with a hydrogen-like heavy ion such as iron demands higher than solar ion abundance.

  1. Helium transfer line installation details.

    CERN Multimedia

    G. Perinic

    2007-01-01

    A particularity of the 32 m long four in one helium transfer line in between the cold box in USC55 and the cavern UX5 is the fact that the transfer line passes through a hole in the crane rail support beam. In order to ensure the alignment of the suspension rail in the interconnecting tunnel with the hole in the rail support as well as the connection points at both ends required precise measurements of the given geometries as well as the installation of a temporary target for the verification of the theoretical predictions.

  2. Nazca-Lines and Maria Reiche - I.

    Science.gov (United States)

    Kaifu, N.

    Huge and numerous geometrical lines and figures drawn on the stony desert near Nazca, Peru, are known as "Nazca Lines". Those lines might be the "largest calendar" which were drawn by ancient Peruvian towards the directions of setting and rising celestial bodies, proposes Maria Reiche, a great researcher and introducer of the Nazca Lines. The author reports the status of the Nazca Lines, and reviews the various studies to explain the purpose why the Nazca Lines were drawn.

  3. 46 CFR 45.31 - Deck line.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Deck line. 45.31 Section 45.31 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LOAD LINES GREAT LAKES LOAD LINES Load Line Marks § 45.31 Deck line. (a) Each vessel must be marked with a deck line on the outer surface of the shell on each side of...

  4. Modern techniques and technologies for unbundled access in the local loop

    Science.gov (United States)

    Bacis Vasile, Irina Bristena; Schiopu, Paul; Marghescu, Cristina

    2015-02-01

    The efficient and unbundled use of the existing telecommunications infrastructure represents a major goal for the development of the services offered by telecommunications providers. A major telecommunications operator can provide services to a subscriber using a copper wire pair or part of the frequency spectrum of a copper wire pair, together with other operators, through a process of unbundling access in the local loop. Since access to the vocal band is an already solved problem, concerns turn to the broadband access with xDSL service delivery on ungrouped subscriber loops; besides the legal and economic aspects involved this has become an engineering problem also. The local loop unbundling methods have a substantial technical impact. This impact should be taken into account right from the design stage and then in the standardization stage of broadband systems intended to operate on copper wire pairs in the local loop. These systems are known under the generic term of xDSL and began to be analyzed in the late 90s. xDSL became the dominant solution for providing Internet at a reasonable price for both residential and business subscribers. In this massive development scenario, certain problems will arise from the early stages of deployment, and another type of problems will occur later on when a large number of systems will be installed in a single beam.

  5. Streaming Algorithms for Line Simplification

    DEFF Research Database (Denmark)

    Abam, Mohammad; de Berg, Mark; Hachenberger, Peter

    2010-01-01

    We study the following variant of the well-known line-simplification problem: we are getting a (possibly infinite) sequence of points p 0,p 1,p 2,… in the plane defining a polygonal path, and as we receive the points, we wish to maintain a simplification of the path seen so far. We study this pro...

  6. CERN Video News on line

    CERN Multimedia

    2003-01-01

    The latest CERN video news is on line. In this issue : an interview with the Director General and reports on the new home for the DELPHI barrel and the CERN firemen's spectacular training programme. There's also a vintage video news clip from 1954. See: www.cern.ch/video or Bulletin web page

  7. Persistent diffusion on a line

    Science.gov (United States)

    Balakrishnan, V.; Chaturvedi, S.

    1988-02-01

    We consider solutions to the telegraph equation describing persistent diffusion on a line under various initial conditions. The first passage time distribution is evaluated in closed form. Biased persistent diffusion is also considered. A direct derivation of the telegraph equation from the stochastic equation for the displacement is presented in an appendix.

  8. Software product lines : Organizational alternatives

    NARCIS (Netherlands)

    Bosch, J

    2001-01-01

    Software product lines enjoy increasingly wide adoption in the software industry. Most authors focus on the technical and process aspects and assume an organizational model consisting of a domain engineering unit and several application engineering units. In our cooperation with several software

  9. Reconnections of Wave Vortex Lines

    Science.gov (United States)

    Berry, M. V.; Dennis, M. R.

    2012-01-01

    When wave vortices, that is nodal lines of a complex scalar wavefunction in space, approach transversely, their typical crossing and reconnection is a two-stage process incorporating two well-understood elementary events in which locally coplanar hyperbolas switch branches. The explicit description of this reconnection is a pedagogically useful…

  10. Pulsations detected in the line profile variations of red giants : modelling of line moments, line bisector and line shape

    NARCIS (Netherlands)

    Hekker, S.; Aerts, C.; Ridder, J. de; Carrier, F.

    2006-01-01

    Context: So far, red giant oscillations have been studied from radial velocity and/or light curve variations, which reveal frequencies of the oscillation modes. To characterise radial and non-radial oscillations, line profile variations are a valuable diagnostic. Here we present for the first time a

  11. Managing first-line failure

    Directory of Open Access Journals (Sweden)

    David A Cooper

    2014-11-01

    Full Text Available WHO standard of care for failure of a first regimen, usually 2N(tRTI's and an NNRTI, consists of a ritonavir-boosted protease inhibitor with a change in N(tRTI's. Until recently, there was no evidence to support these recommendations which were based on expert opinion. Two large randomized clinical trials, SECOND LINE and EARNEST both showed excellent response rates (>80% for the WHO standard of care and indicated that a novel regimen of a boosted protease inhibitor with an integrase inhibitor had equal efficacy with no difference in toxicity. In EARNEST, a third arm consisting of induction with the combined protease and integrase inhibitor followed by protease inhibitor monotherapy maintenance was inferior and led to substantial (20% protease inhibitor resistance. These studies confirm the validity of the current recommendations of WHO and point to a novel public health approach of using two new classes for second line when standard first-line therapy has failed, which avoids resistance genotyping. Notwithstanding, adherence must be stressed in those failing first-line treatments. Protease inhibitor monotherapy is not suitable for a public health approach in low- and middle-income countries.

  12. Coiled transmission line pulse generators

    Science.gov (United States)

    McDonald, Kenneth Fox

    2010-11-09

    Methods and apparatus are provided for fabricating and constructing solid dielectric "Coiled Transmission Line" pulse generators in radial or axial coiled geometries. The pour and cure fabrication process enables a wide variety of geometries and form factors. The volume between the conductors is filled with liquid blends of monomers, polymers, oligomers, and/or cross-linkers and dielectric powders; and then cured to form high field strength and high dielectric constant solid dielectric transmission lines that intrinsically produce ideal rectangular high voltage pulses when charged and switched into matched impedance loads. Voltage levels may be increased by Marx and/or Blumlein principles incorporating spark gap or, preferentially, solid state switches (such as optically triggered thyristors) which produce reliable, high repetition rate operation. Moreover, these Marxed pulse generators can be DC charged and do not require additional pulse forming circuitry, pulse forming lines, transformers, or an a high voltage spark gap output switch. The apparatus accommodates a wide range of voltages, impedances, pulse durations, pulse repetition rates, and duty cycles. The resulting mobile or flight platform friendly cylindrical geometric configuration is much more compact, light-weight, and robust than conventional linear geometries, or pulse generators constructed from conventional components. Installing additional circuitry may accommodate optional pulse shape improvements. The Coiled Transmission Lines can also be connected in parallel to decrease the impedance, or in series to increase the pulse length.

  13. Line bundles and flat connections

    Indian Academy of Sciences (India)

    /fulltext/pmsc/127/03/0547-0549. Keywords. Calabi–Yau threefold; torsion; cocompact lattice; unitary representation. Abstract. We prove that there are cocompact lattices Γ in S L ( 2 , C ) with the property that there are holomorphic line bundles ...

  14. Managing first-line failure.

    Science.gov (United States)

    Cooper, David A

    2014-01-01

    WHO standard of care for failure of a first regimen, usually 2N(t)RTI's and an NNRTI, consists of a ritonavir-boosted protease inhibitor with a change in N(t)RTI's. Until recently, there was no evidence to support these recommendations which were based on expert opinion. Two large randomized clinical trials, SECOND LINE and EARNEST both showed excellent response rates (>80%) for the WHO standard of care and indicated that a novel regimen of a boosted protease inhibitor with an integrase inhibitor had equal efficacy with no difference in toxicity. In EARNEST, a third arm consisting of induction with the combined protease and integrase inhibitor followed by protease inhibitor monotherapy maintenance was inferior and led to substantial (20%) protease inhibitor resistance. These studies confirm the validity of the current recommendations of WHO and point to a novel public health approach of using two new classes for second line when standard first-line therapy has failed, which avoids resistance genotyping. Notwithstanding, adherence must be stressed in those failing first-line treatments. Protease inhibitor monotherapy is not suitable for a public health approach in low- and middle-income countries.

  15. US line-ups outperform UK line-ups

    OpenAIRE

    Seale-Carlisle, Travis M.; Mickes, Laura

    2016-01-01

    In the USA and the UK, many thousands of police suspects are identified by eyewitnesses every year. Unfortunately, many of those suspects are innocent, which becomes evident when they are exonerated by DNA testing, often after having been imprisoned for years. It is, therefore, imperative to use identification procedures that best enable eyewitnesses to discriminate innocent from guilty suspects. Although police investigators in both countries often administer line-up procedures, the details ...

  16. Fully Photonic Wireless Link for Transmission of Synchronization Signals

    Directory of Open Access Journals (Sweden)

    O. Wilfert

    2016-04-01

    Full Text Available Rapid industrialization and increasing demand of business tools for high-speed communications supports the request for optical communications in free space. Copper cables and related technologies such as cable modems and Digital Subscriber Line (DSL are common in existing networks, but do not meet the bandwidth requirement in the future, which opens the door to optical wireless communication technologies. Research in links for optical wireless communication (Infra Red Line of Sight, IR LOS working in the atmosphere is due to the wide support of its development on the world market. Optical wireless communications research is currently focused on increasing the transmission quality of data links. A promising new trend in data connection through IR LOS includes the transfer of accurate time synchronization pulses (time transmission. The article presents problems of modeling and design of a transmitter and receiver with a fully photonic concept. The analysis of the power levels at the link and drawn a model for determining the connection losses at the receiver caused by optical coupling between a Schmidt-Cassegrain telescope and the receiving optical fiber is shown.

  17. Spectral Line Shapes of He I Line 3889 Å

    Directory of Open Access Journals (Sweden)

    Banaz Omar

    2014-06-01

    Full Text Available Spectral line shapes of neutral helium 3889 Å(23S–33P transition line are calculated by using several theoretical methods. The electronic contribution to the line broadening is calculated from quantum statistical many-particle theory by using thermodynamic Green's function, including dynamic screening of the electron-atom interaction. The ionic contribution is taken into account in a quasistatic approximation, where a static microfield distribution function is presented. Strong electron collisions are consistently considered with an effective two-particle T-matrix approach, where Convergent Close Coupling method gives scattering amplitudes including Debye screening for neutral helium. Then the static profiles converted to dynamic profiles by using the Frequency Fluctuation Model. Furthermore, Molecular Dynamics simulations for interacting and independent particles are used where the dynamic sequence of microfield is taken into account. Plasma parameters are diagnosed and good agreements are shown by comparing our theoretical results with the recent experimental result of Jovićević et al. (J. Phys. B: At. Mol. Opt. Phys. 2005, 38, 1249. Additionally, comparison with various experimental data in a wide range of electron density ne ≈ (1022− 1024m−3 and temperature T ≈ (2−6 × 104 K are presented.

  18. Transmission line studies for ITER compatible reflectometers

    NARCIS (Netherlands)

    Wagner, D.; Kasparek, W.; Gantenbein, G.; Manso, M. E.; Sanchez, J.; Donne, A. J. H.

    1997-01-01

    Corrugated circular transmission lines are considered as high performance, low loss, broadband lines for reflectometry on ITER. These lines are proposed as a possible solution for the equatorial low-field-side system and as a part (receiver-vacuum vessel) of the transmission lines for the high-field

  19. 18 CFR 2.2 - Transmission lines.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Transmission lines. 2.2... Under the Federal Power Act § 2.2 Transmission lines. In a public statement dated March 7, 1941, the Commission announced its determination that transmission lines which are not primary lines transmitting power...

  20. Nazca-lines and Maria Reiche - II.

    Science.gov (United States)

    Kaifu, N.

    Huge and numerous geometrical lines and figures drawn on the stony desert near Nazca, Peru, are known as "Nazca Lines". Those lines might be the "largest calendar" which were drawn towards the directions of setting and rising celestial bodies by ancient Peruvian, proposes Maria Reiche, a great researcher and introducer of the Nazca Lines. The future of the Nazca Lines is seriously concerned due to the recent rapid developments in Peru. The author reports the status of the Nazca Lines, and reviews the various studies to explain the purpose why the Nazca Lines were drawn.

  1. LINE-1 Cultured Cell Retrotransposition Assay

    Science.gov (United States)

    Kopera, Huira C.; Larson, Peter A.; Moldovan, John B.; Richardson, Sandra R.; Liu, Ying; Moran, John V.

    2016-01-01

    Summary The Long INterspersed Element-1 (LINE-1 or L1) retrotransposition assay has facilitated the discovery and characterization of active (i.e., retrotransposition-competent) LINE-1 sequences from mammalian genomes. In this assay, an engineered LINE-1 containing a retrotransposition reporter cassette is transiently transfected into a cultured cell line. Expression of the reporter cassette, which occurs only after a successful round of retrotransposition, allows the detection and quantification of the LINE-1 retrotransposition efficiency. This assay has yielded insight into the mechanism of LINE-1 retrotransposition. It also has provided a greater understanding of how the cell regulates LINE-1 retrotransposition and how LINE-1 retrotransposition impacts the structure of mammalian genomes. Below, we provide a brief introduction to LINE-1 biology and then detail how the LINE-1 retrotransposition assay is performed in cultured mammalian cells. PMID:26895052

  2. Forecasting for dynamic line rating

    DEFF Research Database (Denmark)

    Michiorri, Andrea; Nguyen, Huu-Minh; Alessandrini, Stefano

    2015-01-01

    This paper presents an overview of the state of the art on the research on Dynamic Line Rating forecasting. It is directed at researchers and decision-makers in the renewable energy and smart grids domain, and in particular at members of both the power system and meteorological community. Its aim...... sensors on the line that measure conductor temperature, tension, sag or environmental parameters such as wind speed and air temperature. Because of the conservative assumptions used to calculate static seasonal ampacity limits and the variability of weather parameters, DLRs are considerably higher than....... In order to facilitate the integration of DLR into power system operations, research has been launched into DLR forecasting, following a similar avenue to IRS production forecasting, i.e. based on a mix of statistical methods and meteorological forecasts. The development of reliable DLR forecasts...

  3. Line Creep in Paper Peeling

    Directory of Open Access Journals (Sweden)

    Rosti J.

    2010-06-01

    Full Text Available We have studied experimentally the dynamics of the separation of a sheet of paper into two halves in a peeling configuration. The experimental setup consists of a peeling device, where a fracture front is driven along the plane of the paper, with a constant force. The theoretical picture is how an elastic line interacts with a random landscape of fracture toughness. We compare the results with theoretical simulations in several aspects. One recent finding concerns the autocorrelation function of the average front position. The data from the experiments produces so-called cusps or singularities in the correlation function, as predicted by the functional renormalization group theory for elastic lines. Comparisons with simulations with either a short range or a long range elastic kernel demonstrate that the latter agrees with the experimental observations, as expected.

  4. On-line moisture analysis

    CERN Document Server

    Cutmore, N G

    2002-01-01

    Measurement of the moisture content of iron ore has become a key issue for controlling moisture additions for dust suppression. In most cases moisture content is still determined by manual or automatic sampling of the ore stream, followed by conventional laboratory analysis by oven drying. Although this procedure enables the moisture content to be routinely monitored, it is too slow for control purposes. This has generated renewed interest in on-line techniques for the accurate and rapid measurement of moisture in iron ore on conveyors. Microwave transmission techniques have emerged over the past 40 years as the dominant technology for on-line measurement of moisture in bulk materials, including iron ores. Alternative technologies have their limitations. Infra-red analysers are used in a variety of process industries, but rely on the measurement of absorption by moisture in a very thin surface layer. Consequently such probes may be compromised by particle size effects and biased presentation of the bulk mater...

  5. Transversal Lines of the Debates

    Directory of Open Access Journals (Sweden)

    Yolanda Onghena

    1998-12-01

    Full Text Available The Transversal Lines of the Debates gathers for publication the presentations of the scholars invited to the seminar. In the papers, Yolanda Onghena observes that the evolution from the cultural to the inter-cultural travels along four axes: the relations between cultureand society; the processes of change within identity-based dynamics; the representations of the Other; and, interculturality. Throughout the presentations and subsequent debates, whenever the different participants referred to aspects of the cultural identity problematic--”angst”, “obsession”, “deficit”, manipulation”, and others, these same participants in the Transversal Lines of the Debates also showed that, in certain areas, an optimistic viewpoint is not out of the question.

  6. Line graphs as social networks

    Science.gov (United States)

    Krawczyk, M. J.; Muchnik, L.; Mańka-Krasoń, A.; Kułakowski, K.

    2011-07-01

    It was demonstrated recently that the line graphs are clustered and assortative. These topological features are known to characterize some social networks [M.E.J. Newman, Y. Park, Why social networks are different from other types of networks, Phys. Rev. E 68 (2003) 036122]; it was argued that this similarity reveals their cliquey character. In the model proposed here, a social network is the line graph of an initial network of families, communities, interest groups, school classes and small companies. These groups play the role of nodes, and individuals are represented by links between these nodes. The picture is supported by the data on the LiveJournal network of about 8×10 6 people.

  7. About cosmic gamma ray lines

    Science.gov (United States)

    Diehl, Roland

    2017-06-01

    Gamma ray lines from cosmic sources convey the action of nuclear reactions in cosmic sites and their impacts on astrophysical objects. Gamma rays at characteristic energies result from nuclear transitions following radioactive decays or high-energy collisions with excitation of nuclei. The gamma-ray line from the annihilation of positrons at 511 keV falls into the same energy window, although of different origin. We present here the concepts of cosmic gamma ray spectrometry and the corresponding instruments and missions, followed by a discussion of recent results and the challenges and open issues for the future. Among the lessons learned are the diffuse radioactive afterglow of massive-star nucleosynthesis in 26Al and 60Fe gamma rays, which is now being exploited towards the cycle of matter driven by massive stars and their supernovae; large interstellar cavities and superbubbles have been recognised to be of key importance here. Also, constraints on the complex processes making stars explode as either thermonuclear or core-collapse supernovae are being illuminated by gamma-ray lines, in this case from shortlived radioactivities from 56Ni and 44Ti decays. In particular, the three-dimensionality and asphericities that have recently been recognised as important are enlightened in different ways through such gamma-ray line spectroscopy. Finally, the distribution of positron annihilation gamma ray emission with its puzzling bulge-dominated intensity disctribution is measured through spatially-resolved spectra, which indicate that annihilation conditions may differ in different parts of our Galaxy. But it is now understood that a variety of sources may feed positrons into the interstellar medium, and their characteristics largely get lost during slowing down and propagation of positrons before annihilation; a recent microquasar flare was caught as an opportunity to see positrons annihilate at a source.

  8. Assembly delay line pulse generators

    CERN Multimedia

    CERN PhotoLab

    1971-01-01

    Assembly of six of the ten delay line pulse generators that will power the ten kicker magnet modules. One modulator part contains two pulse generators. Capacitors, inductances, and voltage dividers are in the oil tank on the left. Triggered high-pressure spark gap switches are on the platforms on the right. High voltage pulse cables to the kicker magnet emerge under the spark gaps. In the centre background are the assembled master gaps.

  9. Chalk Line Mill, Anniston, AL

    Science.gov (United States)

    The Chalk Line Mill property was the site of a textile mill which operated from 1887 until 1994. Demolition activities in 2004 removed most of the structures on-site, but also left large, unsightly piles of debris scattered across this 14-acre property. The City applied for and received a $200,000 Brownfields cleanup grant in 2007 to address contamination on the property and the Appalachian Regional Commission provided an additional $150,000 in funding.

  10. ac transmission line field measurements

    Energy Technology Data Exchange (ETDEWEB)

    Kotter, F.R.; Misakian, M.

    1977-11-01

    The concern in recent years over the environmental effects of electric and magnetic fields from high voltage transmission lines has also focused attention on the accuracy of measurements of these fields. Electric field meters are discussed in terms of theory of operation, parameters affecting performance, meter performance under field and laboratory conditions, and calibration procedures. The performance and calibration of magnetic field meters is described. (LCL)

  11. Firing up the front line.

    Science.gov (United States)

    Katzenbach, J R; Santamaria, J A

    1999-01-01

    For many organizations, achieving competitive advantage means eliciting superior performance from employees on the front line--the burger flippers, hotel room cleaners, and baggage handlers whose work has an enormous effect on customers. That's no easy task. Front line workers are paid low wages, have scant hope of advancement, and--not surprisingly--often care little about the company's performance. But then how do some companies succeed in engaging the emotional energy of rank-and-file workers? A team of researchers at McKinsey & Company and the Conference Board recently explored that question and discovered that one highly effective route is demonstrated by the U.S. Marine Corps. The Marines' approach to motivation follows the "mission, values, and pride" path, which researchers say is practical and relevant for the business world. More specifically, the authors say the Marines follow five practices: they over-invest in cultivating core value; prepare every person to lead, including front line supervisors; learn when to create teams and when to create single-leader work groups; attend to all employees, not just the top half; and encourage self-discipline as a way of building pride. The authors admit there are critical differences between the Marines and most businesses. But using vivid examples from companies such as KFC and Marriott International, the authors illustrate how the Marines' approach can be translated for corporate use. Sometimes, the authors maintain, minor changes in a company's standard operating procedure can have a powerful effect on front line pride and can result in substantial payoffs in company performance.

  12. On-line survey method

    OpenAIRE

    Dvornáková, Táňa

    2008-01-01

    Thesis deals with modern ways of surveys using advancing information technology and internet which makes surveys using web applications more effective. After a short review of public opinion history the summary of principal czech and forign survey organizations engaged in determination of survey rules are presented. Thesis follows with description of classic and modern data collecting methods. Main attention is devoted to on-line survey method. The description of method, possibilities of real...

  13. Diccionario de neologismos on line

    OpenAIRE

    Institut Universitari de Lingstica Aplicada; Institut Universitari de Lingüística Aplicada

    2010-01-01

    El Diccionario de neologismos on line es una obra lexicográfica que recoge más de 4.000 neologismos en castellano documentados entre 1989 y 2007, mayoritariamente en prensa escrita. Los neologismos van acompañados de definición lexicográfica y varios contextos de uso, además de informaciones sobre la categoría grammatical, la fuente y fecha de procedencia, etc.

  14. Replication timing kept in LINE.

    Science.gov (United States)

    O'Neill, Rachel J; O'Neill, Michael J

    2018-01-18

    Accurate and synchronous replication timing between chromosome homologues is essential for maintaining chromosome stability, yet how this is achieved has remained a mystery. In this issue, Platt et al. (2018. J. Cell Biol. https://doi.org/10.1083/jcb.201707082) identify antisense LINE (L1) transcripts within long noncoding RNAs as the critical factor in maintaining synchronous chromosome-wide replication timing. © 2018 O'Neill and O'Neill.

  15. Line-Editor Computer Program

    Science.gov (United States)

    Scott, Peter J.

    1989-01-01

    ZED editing program for DEC VAX computer simple, powerful line editor for text, program source code, and nonbinary data. Excels in processing of text by use of procedure files. Also features versatile search qualifiers, global changes, conditionals, online help, hexadecimal mode, space compression, looping, logical combinations of search strings, journaling, visible control characters, and automatic detabbing. Users of Cambridge implementation devised such ZED procedures as chess games, calculators, and programs for evaluating pi. Written entirely in C.

  16. Gamma-Ray Line Astronomy

    OpenAIRE

    Diehl, Roland

    2004-01-01

    Gamma-ray lines from radioactive isotopes, ejected into interstellar space by cosmic nucleosynthesis events, are observed with new space telescopes. The Compton Observatory had provided a sky survey for the isotopes 56Co, 22Na, 44Ti, and 26Al, detecting supernova radioactivity and the diffuse glow of long-lived radioactivity from massive stars in the Galaxy. High-resolution spectroscopy is now being exploited with Ge detectors: Since 2002, with ESA's INTEGRAL satellite and the RHESSI solar im...

  17. Workshop on Radio Recombination Lines

    CERN Document Server

    1980-01-01

    Since their first detection 15 years ago, radio recombination lines from several elements have been observed in a wide variety of objects including HII regions, planetary nebulae, molecular clouds, the diffuse interstellar medium, and recently, other galaxies. The observations span almost the entire range from 0.1 to 100 GHz, and employ both single­ djsh and aperture synthesis techniques. The theory of radio recombination lines has also advanced strongly, to the point where it is perhaps one of the best-understood in astro­ physics. In a parallel development, it has become possible over the last decade to study these same highly-excited atoms in the laboratory; this work provides further confirmation of the theoretical framework. However there has been continuing controversy over the astrophysical interpre­ tation of radio recombination line observations, especially regarding the role of stimulated emission. A workshop was held in Ottawa on 24-25 August, 1979, bringing together many of the active scientist...

  18. Managing SEMP on-line

    Energy Technology Data Exchange (ETDEWEB)

    Watson, L.E.; Luppens, J.C. [Phillips Petroleum, Lafayette, LA (United States); Johnson, S.T. [M and H Enterprises, Inc., Lafayette, LA (United States)

    1998-12-31

    The North America Production Division of Phillips Petroleum Company has teamed with M and H Enterprises to provide its operators, technicians, engineers and management on-line access and control of the change process and the extensive documentation involved in compliance with API RP 75 Safety and Environmental Management Program (SEMP). M and H Enterprises developed the WinPSM/SEMP{trademark} software and customized it to meet Phillips` SEMP policies and software standards. WinPSM/SEMP is a Windows based client server application, which features the use of a state of the art document management software technology. This system addresses all the elements of SEMP with the all important Management of Change module as a cornerstone component to the program. This paper presents the benefits of an on-line system over the traditional paper based system to control documentation resulting from SEMP compliance. It will demonstrate how this solution has resulted in a streamlined management of change process, safety training has become more current, and safety related procedures have become more accessible to the employees and better documented for compliance reporting purposes. The paper will point out the effectiveness of integrating all elements of SEMP into a single software product, taking advantage of familiar workplace environments to speed up the learning curve for field personnel. It will also address the flexibility of using such a system to include other on-line applications that have similar database accessibility requirements between the field and the supporting office.

  19. Community LINE Source Model (C-LINE) | Science Inventory ...

    Science.gov (United States)

    This presentation provides an introduction for the live demo and explains the purpose of C-LINE and its key features. C-LINE is a web-based model designed to inform the community user of local air quality impacts due to mobile-sources in their region of interest using a simplified modeling approach. It is designed for examining what-if scenarios of changes in emissions, such as those due to changes in traffic volume, fleet mix, or vehicle speed. The model is not intended to be used for any regulatory, enforcement or permitting decisions. The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and support environmental diagnostics/forensics with input from multiple data sources. It also develops media- and receptor-specific models, process models, and decision support tools for use both within and outside of EPA.

  20. 49 CFR 192.707 - Line markers for mains and transmission lines.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 3 2010-10-01 2010-10-01 false Line markers for mains and transmission lines. 192... § 192.707 Line markers for mains and transmission lines. (a) Buried pipelines. Except as provided in... buried main and transmission line: (1) At each crossing of a public road and railroad; and (2) Wherever...

  1. 7 CFR 1755.397 - RUS performance specification for line concentrators.

    Science.gov (United States)

    2010-01-01

    .... The telephone set is assumed to have a resistance of 200 ohms. (3) Impedance—subscriber loops. For the...) Battery noise. Noise across the remote terminal battery at power panel distribution bus terminals shall... Figure 1 of this section, the system noise shall be 23 dBrnC or less as follows: ER29AU95.002 (9) Steady...

  2. Integrated Glass Coating Manufacturing Line

    Energy Technology Data Exchange (ETDEWEB)

    Brophy, Brenor [Enki Technology Inc., San Jose, CA (United States)

    2015-09-30

    This project aims to enable US module manufacturers to coat glass with Enki’s state of the art tunable functionalized AR coatings at the lowest possible cost and highest possible performance by encapsulating Enki’s coating process in an integrated tool that facilitates effective process improvement through metrology and data analysis for greater quality and performance while reducing footprint, operating and capital costs. The Phase 1 objective was a fully designed manufacturing line, including fully specified equipment ready for issue of purchase requisitions; a detailed economic justification based on market prices at the end of Phase 1 and projected manufacturing costs and a detailed deployment plan for the equipment.

  3. The Haptic Lines of Homeland

    Science.gov (United States)

    Dawson, P.; Takatsuka, M.

    2013-02-01

    This paper discusses the conceptual underpinnings, working processes and the tools used for preparing the scene files of a holographic art work which offers a subjective view point on the idea of homeland. The art work, Homeland, an optically formed fringe digital hologram, which is contextualized by the holographic maps used in situational awareness, indicates its subjectivity by strongly referencing the human body, particularly the lines of the palm of the hand. ... because the body belongs to the order of things as the world is universal flesh. Maurice Merleau-Ponty

  4. A contrario line segment detection

    CERN Document Server

    von Gioi, Rafael Grompone

    2014-01-01

    The reliable detection of low-level image structures is an old and still challenging problem in computer vision. This?book leads a detailed tour through the LSD algorithm, a line segment detector designed to be fully automatic. Based on the a contrario framework, the algorithm works efficiently without the need of any parameter tuning. The design criteria are thoroughly explained and the algorithm's good and bad results are illustrated on real and synthetic images. The issues involved, as well as the strategies used, are common to many geometrical structure detection problems and some possible

  5. The appearance of beam lines

    Energy Technology Data Exchange (ETDEWEB)

    Carey, D.C.

    1993-05-01

    The combination of an existing graphics package with a large program like TRANSPORT has often resulted in considerable modification to the large program. Use of other graphics package has resulted in essentially having to repeat the work. This difficulty has been avoided in a modification of TRANSPORT which produce layouts of beam lines. Drawings of the reference trajectory and three-dimensional images of all magnets are made by the graphics package TOP DRAWER. Nothing specific to TOP DRAWER or any other graphics has been incorporated into TRANSPORT. If a user is with a different graphics package he or she can then begin usage of this alternate package essentially immediately.

  6. Understanding broadband over power line

    CERN Document Server

    Held, Gilbert

    2006-01-01

    Understanding Broadband over Power Line explores all aspects of the emerging technology that enables electric utilities to provide support for high-speed data communications via their power infrastructure. This book examines the two methods used to connect consumers and businesses to the Internet through the utility infrastructure: the existing electrical wiring of a home or office; and a wireless local area network (WLAN) access point.Written in a practical style that can be understood by network engineers and non-technologists alike, this volume offers tutorials on electric utility infrastru

  7. The Astrophysics of Emission-Line Stars

    CERN Document Server

    Kogure, Tomokazu

    2007-01-01

    Many types of stars show conspicuous emission lines in their optical spectra. These stars are broadly referred to as emission line stars. Emission line stars are attractive to many people because of their spectacular phenomena and their variability. The Astrophysics of Emission Line Stars offers general information on emission line stars, starting from a brief introduction to stellar astrophysics, and then moving toward a broad overview of emission line stars including early and late type stars as well as pre-main sequence stars. Detailed references have been prepared along with an index for further reading.

  8. Composite Based EHV AC Overhead Transmission Lines

    DEFF Research Database (Denmark)

    Sørensen, Thomas Kjærsgaard

    Overhead lines at transmission level are the backbone of any national power grid today. New overhead line projects however are at the same time subject to ever greater public resistance due to the lines environmental impact. As full undergrounding of transmission lines at extra high voltage (EHV...... and analysed with regard to the possibilities, limitations and risks widespread application of composite materials on EHV AC overhead transmission lines may present. To form the basis for evaluation of the useability of composite materials, dierent overhead line projects aimed at reducing the environmental...

  9. Grism-based pulse shaper for line-by-line control of more than 600 optical frequency comb lines.

    Science.gov (United States)

    Kirchner, M S; Diddams, S A

    2010-10-01

    We construct a line-by-line pulse shaper using a grism (grating plus prism) dispersive element, which provides constant angular dispersion over 13.4 THz centered at ~311 THz (965 nm). When combined with a dual-mask liquid crystal modulator, this grism-based shaper is capable of line-by-line amplitude and phase control of over 600 modes of a 21 GHz stabilized optical frequency comb.

  10. See Also:physica status solidi (a)physica status solidi (c)Copyright © 2004 WILEY-VCH Verlag GmbH & Co. KGaA, WeinheimGet Sample CopyFree Online Trial -->Recommend to Your LibrarianSave Title to My ProfileSet E-Mail Alert Journal subnav -->var homepagelinks = new Array(new Array("Journal Home","/cgi-bin/jhome/40001185",""),new Array("Issues","/cgi-bin/jtoc/40001185/",""),new Array("Early View","/cgi-bin/jeview/40001185/",""),new Array("News","/cgi-bin/jabout/40001185/news/index.html",""),new Array("Reviews","/cgi-bin/jabout/40001185/reviews.html",""),new Array("Read Cover Story","/cgi-bin/jabout/40001185/cover/2232/current.html","e"),new Array("","","s"),new Array("Product Information","/cgi-bin/jabout/40001185/2232_info.html",""),new Array("Editorial Board","/cgi-bin/jabout/40001185/edbd.html",""),new Array("For Authors","/cgi-bin/jabout/40001185/authors.html",""),new Array("For Referees","/cgi-bin/jabout/40001185/refserv.html",""),new Array("Subscribe","http://jws-edcv.wiley.com/jcatalog/JournalsCatalogOrder/JournalOrder?PRINT_ISSN=0370-1972",""),new Array("Contact","/cgi-bin/jabout/40001185/contact.html",""),new Array("","","x"));writeJournalLinks("", "40001185");Journal subnav -->journal info area -->journal info area -->Volume 241, Issue5 (April 2004)Articles in the Current Issue:article list -->Cover PictureHorizontal line nodes in superconducting Sr2RuO4

    Science.gov (United States)

    Litak, G.; Annett, J. F.; Györffy, B. L.; Wysokiski, K. I.

    2004-04-01

    Superconductivity in Sr2RuO4 is one of the most interesting phenomena in current condensed matter physics, since it is revealed to be a triplet-pairing state. Our Editor's Choice [1] considers an important problem related to the type of order parameter in this material.The position of line nodes on the Fermi surface, as evident from recent measurements, has been determined for various scenarios shown in the cover picture. Using these models, the temperature dependence of heat capacity and penetration depth has been calculated for easy comparison with experiments.The first author, Grzegorz Litak, is assistant professor at Technical University of Lublin and visiting scientist at the Max Planck Institute in Dresden. He is working on the effect of disorder on correlated and exotic superconductors, nonlinear dynamics, and superconductivity in strontium ruthenate.

  11. Cross delay line sensor characterization

    Energy Technology Data Exchange (ETDEWEB)

    Owens, Israel J [Los Alamos National Laboratory; Remelius, Dennis K [Los Alamos National Laboratory; Tiee, Joe J [Los Alamos National Laboratory; Buck, Steven E [Los Alamos National Laboratory; Whittemore, Stephen R [Los Alamos National Laboratory; Thompson, David C [Los Alamos National Laboratory; Shirey, Robert [Los Alamos National Laboratory

    2010-01-01

    There exists a wealth of information in the scientific literature on the physical properties and device characterization procedures for complementary metal oxide semiconductor (CMOS), charge coupled device (CCD) and avalanche photodiode (APD) format detectors. Numerous papers and books have also treated photocathode operation in the context of photomultiplier tube (PMT) operation for either non imaging applications or limited night vision capability. However, much less information has been reported in the literature about the characterization procedures and properties of photocathode detectors with novel cross delay line (XDL) anode structures. These allow one to detect single photons and create images by recording space and time coordinate (X, Y & T) information. In this paper, we report on the physical characteristics and performance of a cross delay line anode sensor with an enhanced near infrared wavelength response photocathode and high dynamic range micro channel plate (MCP) gain (> 10{sup 6}) multiplier stage. Measurement procedures and results including the device dark event rate (DER), pulse height distribution, quantum and electronic device efficiency (QE & DQE) and spatial resolution per effective pixel region in a 25 mm sensor array are presented. The overall knowledge and information obtained from XDL sensor characterization allow us to optimize device performance and assess capability. These device performance properties and capabilities make XDL detectors ideal for remote sensing field applications that require single photon detection, imaging, sub nano-second timing response, high spatial resolution (10's of microns) and large effective image format.

  12. Beam line design using G4BeamLine

    CERN Document Server

    Dogan, Arda

    2014-01-01

    In Turkey in Ankara TAEK SANAEM Proton Accelerator Facility (PAF), there is a cyclotron which produces a focused intense 30 MeV proton beam and sends this beam to four different arms, three of which uses this beam to produce pharmaceutical medicine. The remaining one is spared for R&D purposes and the idea was to use these protons coming out from the fourth arm to use space radiation tests, which cannot be done in Turkey at the moment. However, according to SCC 25100 standards which is for 30 MeV protons, the beam coming out of cyclotron is too intense and focused to use for space radiation tests. Therefore, the main aim of my project is to design a beam line which will defocus the beam and reduce the flux so that the space radiation tests can be done according to the standards of SCC 25100.

  13. Side-channel Analysis of Subscriber Identity Modules

    Science.gov (United States)

    2013-06-01

    12 ADF application dedicated file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ADN Abbreviated Dialing...storage are the Abbreviated Dialing Numbers ( ADN ) and Last Numbers Dialed (LND) files. The ADN file contains 5 standard phonebook-style name-number

  14. 47 CFR 76.503 - National subscriber limits.

    Science.gov (United States)

    2010-10-01

    ... partnership and the relevant entity so certifies. An interest in a Limited Liability Company (“LLC”) or... and Order, FCC No. 99-288, CS Docket No. 98-82 (released October 20, 1999). In order for the... of a parent company of a video-programming business, with an attributable interest in any such...

  15. Publish and Subscribe Pattern for Designing Demand Driven Supply Networks

    OpenAIRE

    Gnimpieba Zanfack, David,; Nait-Sidi-Moh, Ahmed; Durand, David; Fortin, Jérôme

    2015-01-01

    Part 2: Assessment Approaches; International audience; Logistic flows, business process management and collaboration remain a major problem in the supply chain. In this article we are going through this issue to propose an integrative and collaborative approach. More precisely, we develop a cloud-based and service-oriented bus for business interoperability for logistic flows. Though the bus, we define protocols and standards allowing the integration of data formats which are for the most prop...

  16. Using Publish-Subscribe Messaging for System Status and Automation

    Science.gov (United States)

    Smith, Danford S.

    2015-01-01

    The NASA Goddard Mission Services Evolution Center (GMSEC) system is a message-based plug-and-play open system architecture used in many of NASA mission operations centers. This presentation will focus on the use of GMSEC standard messages to report and analyze the status of a system and enable the automation of the system's components. In GMSEC systems, each component reports its status using a keep-alive message and also publishes status and activities as log messages. In addition, the components can accept functional directive messages from the GMSEC message bus. Over the past several years, development teams have found ways to utilize these messages to create innovative display pages and increasingly sophisticated approaches to automation. This presentation will show the flexibility and value of the message-based approach to system awareness and automation.

  17. CERN Vista pilot available! Subscribe to the Vista seminar!

    CERN Multimedia

    2007-01-01

    Windows Vista became a supported operating system at CERN in mid-August 2007. A tour of the new features and review of the special hardware requirements has already been made, in the June and September issues of the CERN Computer Newsletter: http://cerncourier.com/cws/article/cnl/31099 http://cerncourier.com/cws/article/cnl/30298 The Vista documentation is also available on the WinServices site: http://cern.ch/winservices/Help/?kbid=020201 All new PCs available at the CERN Stores are now compliant with Vista requirements. We therefore encourage users to install Vista on those computers. Users who currently have Windows XP might check whether their PC is compliant with CERN recommendations by visiting the following page: https://cern.ch/WinServices/Services/ComputerAccounts/ComputerAccountStatus.aspxwhere the green box on the right side of the screen is a result of the Vista Readiness check performed. The IT/IS group have prepared a dedicated training s...

  18. TV Broadcast Efficiency in 5G Networks from Subscriber Prospective

    KAUST Repository

    Lau, Chun Pong

    2015-12-06

    The flexibility of radio access network facilitated by 5G networks opens the gateway of deploying dynamic strategies for broadcasting TV channels in an efficient way. Currently, spectrum efficiency and bandwidth efficiency are the two common metrics measuring the efficiency of a system. These metrics assess the net bitrate for a unit of spectrum bandwidth. However, there is a lack of measurement, quantifying the effectiveness of a broadcasting strategy from the user perspective. In this paper, we introduce a novel measurement approach, called broadcast efficiency which considers the mobile user as a main reference. Broadcast efficiency is calculated as the number of served audiences per unit of radio resource. From numerical analysis, we show that broadcasting unpopular TV channels dramatically decreases the broadcast efficiency. This finding is evaluated by employing multiple distributions on the size of audience among TV channels. Furthermore, by conducting a real-life simulation, we discover that a high broadcast efficiency may result in a low percentage of served audiences if the audiences of TV channels are quite evenly distributed.

  19. Design and development of a unified subscribers' SIM registration ...

    African Journals Online (AJOL)

    Compulsory SIM registration in Nigeria started in 2008 in response to several mobile crimes being perpetrated by fraudsters and also to improve service delivery. The decentralized systems currently in use in the country lack flexibility to register heterogeneous SIM cards and encourage multiple registrations. This work, the ...

  20. 2008 TIGER/Line Nationwide Dataset

    Data.gov (United States)

    California Department of Resources — This dataset contains a nationwide build of the 2008 TIGER/Line datasets from the US Census Bureau downloaded in April 2009. The TIGER/Line Shapefiles are an extract...

  1. Variability issues in software product lines

    NARCIS (Netherlands)

    Bosch, J; Florijn, G; Greefhorst, D; Kuusela, J; Obbink, JH; Pohl, K; VanderLinden, F

    2002-01-01

    Software product lines (or system families) have achieved considerable adoption by the software industry. A software product line captures the commonalities between a set of products while providing for the differences. Differences are managed by delaying design decisions, thereby introducing

  2. Basic Stand Alone Carrier Line Items PUF

    Data.gov (United States)

    U.S. Department of Health & Human Services — This release contains the Basic Stand Alone (BSA) Carrier Line Items Public Use Files (PUF) with information from Medicare Carrier claims. The CMS BSA Carrier Line...

  3. Student Peer Evaluated Line Balancing Competition

    National Research Council Canada - National Science Library

    2017-01-01

    The Student Peer Evaluated Line Balancing Competition is a 30-minute in-class problem-based learning experiential exercise that challenges student groups to design a feasible and efficient laptop computer assembly line. Each student...

  4. Electrically Isolating Transmission-Line Driver

    Science.gov (United States)

    Marchman, Robert H.

    1992-01-01

    Proposed optoelectronic coupling circuit used to insert signal in transmission line and to isolate transmission line from ground of circuit in which signal originates. Made from commercially available components, reduces susceptibility to interference along transmission path.

  5. State Wildlife Management Area Public Facilities - lines

    Data.gov (United States)

    Minnesota Department of Natural Resources — This line theme contains facilities and features for WMAs that are best represented as lines. WMAs are part of the Minnesota state recreation system created to...

  6. FB Line Basis for Interim Operation

    Energy Technology Data Exchange (ETDEWEB)

    Shedrow, B.

    1998-10-19

    The safety analysis of the FB-Line Facility indicates that the operation of FB-Line to support the current mission does not present undue risk to the facility and co-located workers, general public, or the environment.

  7. Smart street lights using power line communication

    CSIR Research Space (South Africa)

    Du Toit, P

    2017-09-01

    Full Text Available street light faults with the use of communication over the power line. The developed system communicates over power lines using modified frequency shift keying (FSK) modulation. The system used an LDR (light dependent resistor) based light sensor...

  8. Realization of intermediate links of line arrangements

    OpenAIRE

    Bodin, Arnaud

    2012-01-01

    We investigate several topological and combinatorial properties of line arrangements. We associate to a line arrangement a link obtained by intersecting the arrangement with some sphere. Several topics are discussed: (a) some link configurations can be realized by complex line arrangements but not by real line arrangements; (b) if we intersect the arrangements with a vertical band instead of a sphere, what link configurations can be obtained? (c) relations between link configurations obtained...

  9. The Emission Line Objects At 0PEARS

    Science.gov (United States)

    Pirzkal, Norbert; Malhotra, S.; Rhoads, J. J. E.; Ly, C.; Rothberg, B.; Dahlen, T.

    2012-05-01

    Emission line galaxies are a powerful tracer of star formation in the Universe. By computing and examining the shape of the line luminosity function (the number density per logarithmic interval in line luminosity) we can study how star formation occurred in star forming galaxies. We can also look for variation in the line luminosity function of these objects as a function of redshift to look for evidence of evolution in the way star formation took place over the last few billion years. We present emission line luminosity functions obtained using the slitless grism survey data of the PEARS projects. We applied the PEARS-2D technique to pinpoint the location of line emission in field galaxies and hence were able to extract spectra of individual line emission regions in the PEARS fields, which covers a large fraction of the GOODS-N and GOODS-S fields. We detected lines with fluxes as low as 5. 10^-18 erg/s/cm^2 and identified Ha, OIII, OII, Hg and Lya lines, over a redshift range of 0lines we identified are Ha (213 lines, 0lines, 0.2lines, 0.6line emission regions, multiple line emissions regions as well as several cases of multiple star forming regions in single galaxies. We present the luminosity functions for Ha, OII, and OIII computed across these relatively broad redshift ranges using both the Vmax and STY methods and investigate the redshift dependence of these luminosity functions, and the physical distribution of the emission line regions we detect.

  10. 14 CFR 121.440 - Line checks.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Line checks. 121.440 Section 121.440..., FLAG, AND SUPPLEMENTAL OPERATIONS Crewmember Qualifications § 121.440 Line checks. (a) No certificate... preceding 12 calendar months, that person has passed a line check in which he satisfactorily performs the...

  11. 30 CFR 56.4501 - Fuel lines.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fuel lines. 56.4501 Section 56.4501 Mineral... Installation/construction/maintenance § 56.4501 Fuel lines. Fuel lines shall be equipped with valves capable of stopping the flow of fuel at the source and shall be located and maintained to minimize fire hazards. This...

  12. 30 CFR 57.4501 - Fuel lines.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Fuel lines. 57.4501 Section 57.4501 Mineral... Installation/construction/maintenance § 57.4501 Fuel lines. Fuel lines shall be equipped with valves capable of stopping the flow of fuel at the source and shall be located and maintained to minimize fire hazards. This...

  13. ILIGRA : An Efficient Inverse Line Graph Algorithm

    NARCIS (Netherlands)

    Liu, D.; Trajanovski, S.; Van Mieghem, P.

    2014-01-01

    This paper presents a new and efficient algorithm, ILIGRA, for inverse line graph construction. Given a line graph H, ILIGRA constructs its root graph G with the time complexity being linear in the number of nodes in H. If ILIGRA does not know whether the given graph H is a line graph, it firstly

  14. Parallel line scanning ophthalmoscope for retinal imaging

    NARCIS (Netherlands)

    Vienola, K.V.; Damodaran, M.; Braaf, B.; Vermeer, K.A.; de Boer, J.F.

    2015-01-01

    A parallel line scanning ophthalmoscope (PLSO) is presented using a digital micromirror device (DMD) for parallel confocal line imaging of the retina. The posterior part of the eye is illuminated using up to seven parallel lines, which were projected at 100 Hz. The DMD offers a high degree of

  15. 32 CFR 644.7 - Acquisition lines.

    Science.gov (United States)

    2010-07-01

    ... HANDBOOK Project Planning Civil Works § 644.7 Acquisition lines. (a) Tentative acquisition lines. As..., in accordance with sound real estate practices. Accordingly, fringe tracts will not be acquired until the final acquisition lines are approved by the Division Engineer. (b) Submission. As soon as possible...

  16. optimal assembly line balancing using simulation techniques

    African Journals Online (AJOL)

    user

    In assembly line balancing, a garment manufacturer is interested in whether assembly work will be finished on time for delivery, how machines and employees are being utilized, whether any station in the assembly line is lagging behind the schedule and how the assembly line is doing overall. The role of a supervisor is to ...

  17. Near-Capacity Coding for Discrete Multitone Systems with Impulse Noise

    Directory of Open Access Journals (Sweden)

    Kschischang Frank R

    2006-01-01

    Full Text Available We consider the design of near-capacity-achieving error-correcting codes for a discrete multitone (DMT system in the presence of both additive white Gaussian noise and impulse noise. Impulse noise is one of the main channel impairments for digital subscriber lines (DSL. One way to combat impulse noise is to detect the presence of the impulses and to declare an erasure when an impulse occurs. In this paper, we propose a coding system based on low-density parity-check (LDPC codes and bit-interleaved coded modulation that is capable of taking advantage of the knowledge of erasures. We show that by carefully choosing the degree distribution of an irregular LDPC code, both the additive noise and the erasures can be handled by a single code, thus eliminating the need for an outer code. Such a system can perform close to the capacity of the channel and for the same redundancy is significantly more immune to the impulse noise than existing methods based on an outer Reed-Solomon (RS code. The proposed method has a lower implementation complexity than the concatenated coding approach.

  18. A NOVEL QOS SCHEDULING FOR WIRELESS BROADBAND NETWORKS

    Directory of Open Access Journals (Sweden)

    D. David Neels Pon Kumar

    2010-09-01

    Full Text Available During the last few years, users all over the world have become more and more familiar to the availability of broadband access. When users want broadband Internet service, they are generally restricted to a DSL (Digital Subscribers Line, or cable-modem-based connection. Proponents are advocating worldwide interoperability for microwave access (WiMAX, a technology based on an evolving standard for point-to multipoint wireless networking. Scheduling algorithms that support Quality of Service (QoS differentiation and guarantees for wireless data networks are crucial to the deployment of broadband wireless networks. The performance affecting parameters like fairness, bandwidth allocation, throughput, latency are studied and found out that none of the conventional algorithms perform effectively for both fairness and bandwidth allocation simultaneously. Hence it is absolutely essential for an efficient scheduling algorithm with a better trade off for these two parameters. So we are proposing a novel Scheduling Algorithm using Fuzzy logic and Artificial neural networks that addresses these aspects simultaneously. The initial results show that a fair amount of fairness is attained while keeping the priority intact. Results also show that maximum channel utilization is achieved with a negligible increment in processing time.

  19. Beam line to S155

    CERN Multimedia

    1977-01-01

    The experiment S155 was designed by the Orsay (CSNM-CNRS) Collaboration to observe the properties of exotic light nuclei. It was installed in the PS neutrino tunnel. The photo shows a mass spectrometer (in the background) on line with the PS proton beam which arrives (bottom, right) from the fast extraction FE74. Roger Fergeau stands on the left. The alkaline isotopes produced in the carbon-uranium target heated at 2000°C were swiftly extracted, mass separated, and brought to a detector behind the shielding. Sodium 34 (11 protons and 23 neutrons) was observed and its half-life of only 5 ms was measured. The excited levels 2+ of Magnesium 30 and Magnesium 32 (Sodium descendants) were localised, and the magic number 20 was found to vanish. Thus, the discovery made earlier for Sodium 30 and Sodium 32, with the same apparatus, was confirmed. (See also photo 7706511.)

  20. The Order Specification Decoupling Line

    DEFF Research Database (Denmark)

    Hansen, Benjamin Loer; Hvam, Lars

    2004-01-01

    This paper discusses the important issue in build-to-order production of separating innovative long term engineering processes from day-to-day variant specification processes, i.e. the processes creating specifications such as bill-of-materials, drawings, text descriptions, routings etc. The paper...... proposes and discusses the term Order Specification Decoupling Line (OSDL), which is to be used to explain the separation of industrial specifications into some information created prior to order acquisition and some information created during order acquisition and order fulfillment. For instance one may...... find some welding specifications or product descriptions which are standard for every order, while there may be other specifications, such as bill-of-materials and drawings, which are customized. Through a use of this concept it becomes possible to discuss different levels of OSDL and different variant...

  1. Superconducting transmission line particle detector

    Science.gov (United States)

    Gray, Kenneth E.

    1989-01-01

    A microvertex particle detector for use in a high energy physic collider including a plurality of parallel superconducting thin film strips separated from a superconducting ground plane by an insulating layer to form a plurality of superconducting waveguides. The microvertex particle detector indicates passage of a charged subatomic particle by measuring a voltage pulse measured across a superconducting waveguide caused by the transition of the superconducting thin film strip from a superconducting to a non-superconducting state in response to the passage of a charged particle. A plurality of superconducting thin film strips in two orthogonal planes plus the slow electromagnetic wave propogating in a superconducting transmission line are used to resolve N.sup.2 ambiguity of charged particle events.

  2. Growing bubbles rising in line

    Directory of Open Access Journals (Sweden)

    John F. Harper

    2001-01-01

    Full Text Available Over many years the author and others have given theories for bubbles rising in line in a liquid. Theory has usually suggested that the bubbles will tend towards a stable distance apart, but experiments have often showed them pairing off and sometimes coalescing. However, existing theory seems not to deal adequately with the case of bubbles growing as they rise, which they do if the liquid is boiling, or is a supersaturated solution of a gas, or simply because the pressure decreases with height. That omission is now addressed, for spherical bubbles rising at high Reynolds numbers. As the flow is then nearly irrotational, Lagrange's equations can be used with Rayleigh's dissipation function. The theory also works for bubbles shrinking as they rise because they dissolve.

  3. Unsplit bipolar pulse forming line

    Science.gov (United States)

    Rhodes, Mark A [Pleasanton, CA

    2011-05-24

    A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

  4. Spinless hourglass nodal-line semimetals

    Science.gov (United States)

    Takahashi, Ryo; Hirayama, Motoaki; Murakami, Shuichi

    2017-10-01

    Nodal-line semimetals, one of the topological semimetals, have degeneracy along nodal lines where the band gap is closed. In many cases, the nodal lines appear accidentally, and in such cases it is impossible to determine whether the nodal lines appear or not, only from the crystal symmetry and the electron filling. In this paper, for spinless systems, we show that in specific space groups at 4 N +2 fillings (8 N +4 fillings including the spin degree of freedom), presence of the nodal lines is required regardless of the details of the systems. Here, the spinless systems refer to crystals where the spin-orbit coupling is negligible and the spin degree of freedom can be omitted because of the SU(2) spin degeneracy. In this case the shape of the band structure around these nodal lines is like an hourglass, and we call this a spinless hourglass nodal-line semimetal. We construct a model Hamiltonian as an example and we show that it is always in the spinless hourglass nodal-line semimetal phase even when the model parameters are changed without changing the symmetries of the system. We also establish a list of all the centrosymmetric space groups, under which spinless systems always have hourglass nodal lines, and illustrate where the nodal lines are located. We propose that Al3FeSi2 , whose space-group symmetry is Pbcn (No. 60), is one of the nodal-line semimetals arising from this mechanism.

  5. Mode propagation and attenuation in lined ducts

    CERN Document Server

    BI, Wenping

    2014-01-01

    Optimal impedance for each mode is an important concept in an infinitely long duct lined with uniform absorption material. However it is not valid for finite length linings. This is because that the modes in lined ducts are not power-orthogonal; the total sound power is not equal to the sum of the sound power of each mode; cross-power terms may play important roles. In this paper, we study sound propagation and attenuation in an infinite rigid duct lined with a finite length of lining impedance. The lining impedance may be axial segments and circumferentially non-uniform. We propose two new physical quantities Kp and S to describe the self-overlap of the left eigenfunction and right eigenfunction of one mode and the normalized overlap between modes, respectively. The two new physical quantities describe totally the mode behaviors in lined ducts.

  6. WebDSL : A Case Study in Domain-Specific Language Engineering

    NARCIS (Netherlands)

    Visser, E.

    2008-01-01

    Preprint of paper published in: GITTSE 2007 - International Summer School Generative and Transformational Techniques in Software Engineering, 2-7 July 2007, Lecture Notes in Computer Science 5235; doi:10.1007/978-3-540-88643-3_7 The goal of domain-specific languages (DSLs) is to increase the

  7. Integration of data validation and user interface concerns in a DSL for web applications

    NARCIS (Netherlands)

    Groenewegen, D.M.; Visser, E.

    2010-01-01

    Data validation rules constitute the constraints that data input and processing must adhere to in addition to the structural constraints imposed by a data model. Web modeling tools do not make all types of data validation explicit in their models, hampering full code generation and model

  8. Integration of Data Validation and User Interface Concerns in a DSL for Web Applications

    NARCIS (Netherlands)

    Groenewegen, D.M.; Visser, E.

    2010-01-01

    Data validation rules constitute the constraints that data input and processing must adhere to in addition to the structural constraints imposed by a data model. Web modeling tools do not make all types of data validation explicit in their models, hampering full code generation and model

  9. The impact of toxic cyanobacteria on the water quality in the Deep Subalpine Lakes (DSL)

    Science.gov (United States)

    Cerasino, Leonardo; Shams, Shiva; Salmaso, Nico; Dietrich, Daniel

    2013-04-01

    Toxic cyanobacteria represent an emerging threat for aquatic ecosystems worldwide. Eutrophication and climate changes are mentioned among factors favouring toxic blooms. The toxicity of cyanobacteria is related to the ability of some species (the most common in temperate waters belong to the genera Microcystis, Planktothrix, Dolichospermum) of producing a wide variety of toxic secondary metabolites, i.e. microcystins, nodularins, anatoxins, saxitoxins, cylindrospermopsins. Some of these toxins can accumulate in water and aquatic organisms. They can therefore produce severe effects on humans by direct exposure (contact or ingestion of contaminated water) or by indirect exposure (by consumption of contaminated food). We have conducted a survey on the distribution of cyanobacterial toxins in the largest Italian lakes (Garda, Iseo, Como, Maggiore, Lugano), which are important water resources for drinking purposes and for recreational use. Cyanobacterial toxins were present in all lakes, although with a big variability in concentration. More specifically, in the frame of the European project EULAKES, we have investigated in detail the temporal dynamics of the toxin production in Lake Garda, and the mechanisms of trophic transfer of the microcystins along the lacustrine food chain. By applying advanced analytical techniques based on LC-MS technologies, we were able to detect several microcystins at sub-ppb level and follow their variations during the year. The total concentrations of microcystins were strictly linked to the temporal and vertical dynamics of Planktothrix rubescens. Laboratory experiments allowed us to determine the kinetics of microcystin accumulation in zooplankton (daphnia magna).

  10. Creating modular and reusable DSL textual syntax definitions with Grammatic/ANTLR

    OpenAIRE

    Breslav, Andrey

    2009-01-01

    In this paper we present Grammatic -- a tool for textual syntax definition. Grammatic serves as a front-end for parser generators (and other tools) and brings modularity and reuse to their development artifacts. It adapts techniques for separation of concerns from Apsect-Oriented Programming to grammars and uses templates for grammar reuse. We illustrate usage of Grammatic by describing a case study: bringing separation of concerns to ANTLR parser generator, which is achieved without a common...

  11. On-line data display

    Science.gov (United States)

    Lang, Sherman Y. T.; Brooks, Martin; Gauthier, Marc; Wein, Marceli

    1993-05-01

    A data display system for embedded realtime systems has been developed for use as an operator's user interface and debugging tool. The motivation for development of the On-Line Data Display (ODD) have come from several sources. In particular the design reflects the needs of researchers developing an experimental mobile robot within our laboratory. A proliferation of specialized user interfaces revealed a need for a flexible communications and graphical data display system. At the same time the system had to be readily extensible for arbitrary graphical display formats which would be required for data visualization needs of the researchers. The system defines a communication protocol transmitting 'datagrams' between tasks executing on the realtime system and virtual devices displaying the data in a meaningful way on a graphical workstation. The communication protocol multiplexes logical channels on a single data stream. The current implementation consists of a server for the Harmony realtime operating system and an application written for the Macintosh computer. Flexibility requirements resulted in a highly modular server design, and a layered modular object- oriented design for the Macintosh part of the system. Users assign data types to specific channels at run time. Then devices are instantiated by the user and connected to channels to receive datagrams. The current suite of device types do not provide enough functionality for most users' specialized needs. Instead the system design allows the creation of new device types with modest programming effort. The protocol, design and use of the system are discussed.

  12. Automatic Power Line Inspection Using UAV Images

    Directory of Open Access Journals (Sweden)

    Yong Zhang

    2017-08-01

    Full Text Available Power line inspection ensures the safe operation of a power transmission grid. Using unmanned aerial vehicle (UAV images of power line corridors is an effective way to carry out these vital inspections. In this paper, we propose an automatic inspection method for power lines using UAV images. This method, known as the power line automatic measurement method based on epipolar constraints (PLAMEC, acquires the spatial position of the power lines. Then, the semi patch matching based on epipolar constraints (SPMEC dense matching method is applied to automatically extract dense point clouds within the power line corridor. Obstacles can then be automatically detected by calculating the spatial distance between a power line and the point cloud representing the ground. Experimental results show that the PLAMEC automatically measures power lines effectively with a measurement accuracy consistent with that of manual stereo measurements. The height root mean square (RMS error of the point cloud was 0.233 m, and the RMS error of the power line was 0.205 m. In addition, we verified the detected obstacles in the field and measured the distance between the canopy and power line using a laser range finder. The results show that the difference of these two distances was within ±0.5 m.

  13. Transmission of Electric Energy Along Long Lines

    Directory of Open Access Journals (Sweden)

    Berzan V.P.

    2009-08-01

    Full Text Available Transmission of electric energy along long lines is examined and characteristics of the change of capacities at the beginning and at the end of a line are submitted: factor of capacity, efficiency of a transmission line, currents depending on length, parameters of a line and parameters of loading. Influence of losses upon the dynamics of instant values of voltages and currents in the opened and short-circuited long lines is investigated and effects of nonlinearity in such chains are revealed at a power supply from a sinusoidal source of voltage. It is shown, that the method of complex amplitudes is not always applicable for the calculation of modes in long lines.

  14. Landfilling: Bottom Lining and Leachate Collection

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Manfredi, Simone; Kjeldsen, Peter

    2011-01-01

    from entering the groundwater or surface water. The bottom lining system should cover the full footprint area of the landfill, including both the relatively flat bottom and the sideslopes in the case of an excavated configuration. This prevents the lateral migration of leachate from within the landfill......The critical element of a landfill, which is essential for the protection of the environment in general, and prevention of contamination of the underlying soils and groundwater in particular, is the bottom lining system. The major focus of the bottom lining system development is to prevent leachate......, as well as the migration of landfill gas, preventing contact between gas and groundwater. The bottom lining system is composed of a relatively impermeable liner or lining system. This very low hydraulic conductivity system controls the movement of the leachate out of the landfill. The bottom lining system...

  15. Single transmission line data acquisition system

    Science.gov (United States)

    Fasching, George E.

    1984-01-01

    A single transmission line interrogated multiple channel data acquisition system is provided in which a plurality of remote station/sensors monitor specific process variables and transmit measurement values over the single transmission line to a master station when addressed by the master station. Power for all remote stations (up to 980) is provided by driving the line with constant voltage supplied from the master station and automatically maintained independent of the number of remote stations directly connected to the line. The transmission line can be an RG-62 coaxial cable with lengths up to about 10,000 feet with branches up to 500 feet. The remote stations can be attached randomly along the line. The remote stations can be scanned at rates up to 980 channels/second.

  16. Laser line scan performance prediction

    Science.gov (United States)

    Mahoney, Kevin L.; Schofield, Oscar; Kerfoot, John; Giddings, Tom; Shirron, Joe; Twardowski, Mike

    2007-09-01

    The effectiveness of sensors that use optical measurements for the laser detection and identification of subsurface mines is directly related to water clarity. The primary objective of the work presented here was to use the optical data collected by UUV (Slocum Glider) surveys of an operational areas to estimate the performance of an electro-optical identification (EOID) Laser Line Scan (LLS) system during RIMPAC 06, an international naval exercise off the coast of Hawaii. Measurements of optical backscattering and beam attenuation were made with a Wet Labs, Inc. Scattering Absorption Meter (SAM), mounted on a Rutgers University/Webb Research Slocum glider. The optical data universally indicated extremely clear water in the operational area, except very close to shore. The beam-c values from the SAM sensor were integrated to three attenuation lengths to provide an estimate of how well the LLS would perform in detecting and identifying mines in the operational areas. Additionally, the processed in situ optical data served as near-real-time input to the Electro-Optic Detection Simulator, ver. 3 (EODES-3; Metron, Inc.) model for EOID performance prediction. Both methods of predicting LLS performance suggested a high probability of detection and probability of identification. These predictions were validated by the actual performance of the LLS as the EOID system yielded imagery from which reliable mine identification could be made. Future plans include repeating this work in more optically challenging water types to demonstrate the utility of pre-mission UUV surveys of operational areas as a tactical decision aid for planning EOID missions.

  17. Universal statistics of vortex lines.

    Science.gov (United States)

    Nahum, Adam; Chalker, J T

    2012-03-01

    We study the vortex lines that are a feature of many random or disordered three-dimensional systems. These show universal statistical properties on long length scales, and geometrical phase transitions analogous to percolation transitions but in distinct universality classes. The field theories for these problems have not previously been identified, so that while many numerical studies have been performed, a framework for interpreting the results has been lacking. We provide such a framework with mappings to simple supersymmetric models. Our main focus is on vortices in short-range-correlated complex fields, which show a geometrical phase transition that we argue is described by the CP(k|k) model (essentially the CP(n-1) model in the replica limit n→1). This can be seen by mapping a lattice version of the problem to a lattice gauge theory. A related field theory with a noncompact gauge field, the 'NCCP(k|k) model', is a supersymmetric extension of the standard dual theory for the XY transition, and we show that XY duality gives another way to understand the appearance of field theories of this type. The supersymmetric descriptions yield results relevant, for example, to vortices in the XY model and in superfluids, to optical vortices, and to certain models of cosmic strings. A distinct but related field theory, the RP(2l|2l) model (or the RP(n-1) model in the limit n→1) describes the unoriented vortices that occur, for instance, in nematic liquid crystals. Finally, we show that in two dimensions, a lattice gauge theory analogous to that discussed in three dimensions gives a simple way to see the known relation between two-dimensional percolation and the CP(k|k) σ model with a θ term.

  18. Controlled Compact High Voltage Power Lines

    OpenAIRE

    Postolati V.; Bycova Е.; Suslov V.; Timashova L.; Shakarian Yu.; Kareva S.

    2016-01-01

    Nowadays modern overhead transmission lines (OHL) constructions having several significant differences from conventional ones are being used in power grids more and more widely. Implementation of compact overhead lines equipped with FACTS devices, including phase angle regulator settings (compact controlled OHL), appears to be one of the most effective ways of power grid development. Compact controlled AC HV OHL represent a new generation of power transmission lines embodying recent advanced ...

  19. Development of a Handheld Line Information Reader and Generator for Efficient Management of Optical Communication Lines.

    Science.gov (United States)

    Lee, Jaeyul; Kwon, Hyungwoo; Song, Jaewon; Jeon, Mansik; Kim, Jeehyun

    2017-08-24

    A handheld line information reader and a line information generator were developed for the efficient management of optical communication lines. The line information reader consists of a photo diode, trans-impedance amplifier, voltage amplifier, microcontroller unit, display panel, and communication modules. The line information generator consists of a laser diode, laser driving circuits, microcontroller unit, and communication modules. The line information reader can detect the optical radiation field of the test line by bending the optical fiber. To enhance the sensitivity of the line information reader, an additional lens was used with a focal length of 4.51 mm. Moreover, the simulation results obtained through BeamPROP® software from Synopsys, Inc. demonstrated a stronger optical radiation field of the fiber due to a longer transmission wavelength and larger bending angle of the fiber. Therefore, the developed devices can be considered as useful tools for the efficient management of optical communication lines.

  20. Application of transmission-line super theory to classical transmission lines with risers

    Science.gov (United States)

    Rambousky, R.; Nitsch, J.; Tkachenko, S.

    2015-11-01

    By applying the Transmission-Line Super Theory (TLST) to a practical transmission-line configuration (two risers and a horizontal part of the line parallel to the ground plane) it is elaborated under which physical and geometrical conditions the horizontal part of the transmission-line can be represented by a classical telegrapher equation with a sufficiently accurate description of the physical properties of the line. The risers together with the part of the horizontal line close to them are treated as separate lines using the TLST. Novel frequency and local dependent reflection coefficients are introduced to take into account the action of the bends and their radiation. They can be derived from the matrizant elements of the TLST solution. It is shown that the solution of the resulting network and the TLST solution of the entire line agree for certain line configurations. The physical and geometrical parameters for these corresponding configurations are determined in this paper.

  1. Text line Segmentation of Curved Document Images

    Directory of Open Access Journals (Sweden)

    Anusree.M

    2014-05-01

    Full Text Available Document image analysis has been widely used in historical and heritage studies, education and digital library. Document image analytical techniques are mainly used for improving the human readability and the OCR quality of the document. During the digitization, camera captured images contain warped document due perspective and geometric distortions. The main difficulty is text line detection in the document. Many algorithms had been proposed to address the problem of printed document text line detection, but they failed to extract text lines in curved document. This paper describes a segmentation technique that detects the curled text line in camera captured document images.

  2. Stability of the LHC transfer lines

    CERN Document Server

    Kain, V; Bartmann, W; Bracco, C; Goddard, B; Meddahi, M; Uythoven, J; Wenninger, J

    2011-01-01

    The LHC is filled from the SPS through two 3 km transfer lines. The injected beam parameters need to be well under control for luminosity performance, machine protection and operational efficiency. Small fractions of beam loss on the transfer line collimation system create showers which can trigger the sensitive LHC beam loss monitor system nearby and cause a beam abort during filling. The stability of the transfer line trajectory through the collimators is particularly critical in this respect. This paper will report on the transfer line trajectory stability during the proton run in 2011, correlations with injection losses, correction frequency and the most likely sources for the observed oscillations.

  3. Central venous line complications and tip detection

    Directory of Open Access Journals (Sweden)

    Ameneh Rezaee Gheshlaghi

    2015-06-01

    Full Text Available Central venous line is one of a creative instrument that saves human’s life in critical medical situation. Central venous line access is frequently involved in the disease management. It is used for rapid fluid therapy, transvenous pacemakers, infusion of some medications, hemodialysis or plasmapheresis and etc. Most of the emergency departments have some staffs that are trained for central venous line insertion but related complications occur during central venous line placement.Central venous line might have some complications and complication follow-up should be considered. Thromboembolism and infection are two important medical complications. Arterial puncture, hematoma, pneumothorax and hemothorax are mechanical Central venous line complications. Chest X-ray and some other techniques should be used for detecting these complications.Central venous line tip misplace is a considerable problem for emergency department staffs, previously chest X-ray has been used for central venous line misplace detection. In some recent studies, contrast-enhanced ultrasonography and intravascular electrocardiography have been used for central venous line misplace.

  4. Windows Command Line Administration Instant Reference

    CERN Document Server

    Mueller, John Paul

    2010-01-01

    The perfect companion to any book on Windows Server 2008 or Windows 7, and the quickest way to access critical information. Focusing just on the essentials of command-line interface (CLI), Windows Command-Line Administration Instant Reference easily shows how to quickly perform day-to-day tasks of Windows administration without ever touching the graphical user interface (GUI). Specifically designed for busy administrators, Windows Command-Line Administration Instant Reference replaces many tedious GUI steps with just one command at the command-line, while concise, easy to access answers provid

  5. A Product Line Enhanced Unified Process

    DEFF Research Database (Denmark)

    Zhang, Weishan; Kunz, Thomas

    2006-01-01

    activities are added and could be conducted side by side with other classical UP activities. In this way both the advantages of Unified Process and software product lines could co-exist in UPEPL. We show how to use UPEPL with an industrial mobile device product line in our case study.......The Unified Process facilitates reuse for a single system, but falls short handling multiple similar products. In this paper we present an enhanced Unified Process, called UPEPL, integrating the product line technology in order to alleviate this problem. In UPEPL, the product line related...

  6. Detonator comprising a nonlinear transmission line

    Science.gov (United States)

    Elizondo-Decanini, Juan M

    2014-12-30

    Detonators are described herein. In a general embodiment, the detonator includes a nonlinear transmission line that has a variable capacitance. Capacitance of the nonlinear transmission line is a function of voltage on the nonlinear transmission line. The nonlinear transmission line receives a voltage pulse from a voltage source and compresses the voltage pulse to generate a trigger signal. Compressing the voltage pulse includes increasing amplitude of the voltage pulse and decreasing length of the voltage pulse in time. An igniter receives the trigger signal and detonates an explosive responsive to receipt of the trigger signal.

  7. RF Transmission Lines on Silicon Substrates

    Science.gov (United States)

    Ponchak, George E.

    1999-01-01

    A review of RF transmission lines on silicon substrates is presented. Through measurements and calculated results, it is shown that attenuation is dominated by conductor loss if silicon substrates with a resistivity greater than 2500 Ohm-cm are used. Si passivation layers affect the transmission line attenuation; however, measured results demonstrate that passivation layers do not necessarily increase attenuation. If standard, low resistivity Si wafers must be used, alternative transmission lines such as thin film microstrip and Co-Planar Waveguide (CPW) on thick polyimide layers must be used. Measured results presented here show that low loss per unit length is achievable with these transmission lines.

  8. Tubular lining material for pipelines having bends

    Energy Technology Data Exchange (ETDEWEB)

    Moringa, A.; Sakaguchi, Y.; Hyodo, M.; Yagi, I.

    1987-03-24

    A tubular lining material for pipelines having bends or curved portions comprises a tubular textile jacket made of warps and wefts woven in a tubular form overlaid with a coating of a flexible synthetic resin. It is applicable onto the inner surface of a pipeline having bends or curved portions in such manner that the tubular lining material with a binder onto the inner surface thereof is inserted into the pipeline and allowed to advance within the pipeline, with or without the aid of a leading rope-like elongated element, while turning the tubular lining material inside out under fluid pressure. In this manner the tubular lining material is applied onto the inner surface of the pipeline with the binder being interposed between the pipeline and the tubular lining material. The lining material is characterized in that a part of all of the warps are comprised of an elastic yarn around which, over the full length thereof, a synthetic fiber yarn or yarns have been left-and/or right-handedly coiled. This tubular lining material is particularly suitable for lining a pipeline having an inner diameter of 25-200 mm and a plurality of bends, such as gas service pipelines or house pipelines, without occurrence of wrinkles in the lining material in a bend.

  9. Red Sesbania Distribution - lines [ds81

    Data.gov (United States)

    California Department of Resources — This layer conatains line data for the red sesbania (Sesbania punicea) database. The database represents historic and current observations by various individuals of...

  10. Absorption-Line Studies of Seyfert Galaxies

    Science.gov (United States)

    Shull, J. Michael

    We propose to undertake a "reverberation analysis" of the variable absorption lines ill two Seyfert Galaxies (NGC 4051 and Mrk 279) to help understand the origin of intrinsic absorption lines in AGNs. Stich an analysis is a powerful tool for elucidating the radial distribution of absorbing gas in the broad-line region (BLR) and narrow-line region (NLR). Only two Seyferts have previously been studied with this technique: NGC 4151 (Bromage el al. 1985; Clavel et al. 1987) and NGC 3516 (Voit, Shull, and Begelman 1987). The absorption features have been interpreted as an outflow of ionized clouds from the nuclear region or from an accretion disk affected by UV/X-ray heating. Neither the source of the absorbing gas in these Seyferts nor the "gene" which distingishes them from other Seyferts is known. Until the 1984 onset of absorption in Mrk 279, broad self-absorbed. lines had been observed only in Seyferts of low intrinsic luminosity, such as NGC 4051. Mrk 279 is intrinsically much brighter, and therefore more quasar-like, than the other three absorptionline Seyfert I's in the CfA sample. Thus, it may show how the absorption phenomenon changes at higher luminosity and could bridge the gap between the low luminosity absorption-line Seyferts and the well-studied broad absorption-line (BAL) QSO's. In addition, Mrk 279's significant redshift will allow us to study, for the first time, the Ly-alpha line in an absorption-line Seyfert. With 3 US-1 shifts for each of these two underobserved Seyferts, we can double the number of objects in which absorption-line variability has been studied and investigate why the absorption-line strengths correlate or anti-correlate with the UV continuum.

  11. The LHCb VELO analogue transmission line

    Science.gov (United States)

    Bay, A.; Borel, J.; Buytaert, J.; De Laere, S.; Frei, R.; Haefeli, G.; Koppenburg, P.; Locatelli, L.; Schneider, O.; Zehr, F.

    2010-02-01

    The Vertex Locator is one of the most important sub-detectors of the LHCb experiment, which is devoted to B physics. The signals from the silicon strip sensors are multiplexed at 40 MHz and transported by 60 m copper lines to the counting stations placed in a radiation safe area. This paper describes the development of this long transmission line and its performance.

  12. <50> MeV transfer line

    CERN Multimedia

    CERN PhotoLab

    1972-01-01

    Measurement equipment around the 50 MeV transfer line from linac to booster. The vacuum pipe in the centre, with a temporary beam stopper in the foreground, leads to booster injection equipment. On the left is a spectrometer to determine energy spread, and in the right-hand line apparatus for emittance measurement.

  13. Growth and Maintenance of Vero Cell Lines

    OpenAIRE

    Ammerman, Nicole C.; Beier-Sexton, Magda; Azad, Abdu F.

    2008-01-01

    Vero cells are derived from the kidney of an African green monkey, and are one of the more commonly used mammalian continuous cell lines in microbiology, and molecular and cell biology research. This unit includes protocols for the growth and maintenance of Vero cell lines in a research laboratory setting.

  14. Liquid carbon: structure near the freezing line

    NARCIS (Netherlands)

    Ghiringhelli, L.M.; Los, J.H.; Meijer, E.J.; Fasolino, A.; Frenkel, D.

    2005-01-01

    We present a detailed analysis of the structure of liquid carbon near the freezing line. The results are obtained by molecular simulation using a recently developed state-of-the-art bond order potential. We find that along the melting line the liquid is predominantly threefold coordinated up to

  15. Structural Modules Would Contain Transmission Lines

    Science.gov (United States)

    Leavy, W. A.

    1982-01-01

    New proposal, originally suggested for Spacecraft, is a set of uniformly sized mass-producible modular structural elements that contain electric, fluid, and other transmission lines. Since lines are encapsulated, they are less likely to be damaged. Module shell could be solid metal, sheet metal, honeycomb, fiberglass, plastic, composites, or wood.

  16. Coping on the Front-line

    DEFF Research Database (Denmark)

    Sanden, Guro Refsum; Lønsmann, Dorte

    This article investigates how front-line employees respond to English language policies implemented by the management of three multinational corporations (MNCs) headquartered in Scandinavia. Based on interview and document data the article examines the ways in which front-line employees cross lan...

  17. Identifying Fractions on a Number Line

    Science.gov (United States)

    Wong, Monica

    2013-01-01

    Fractions are generally introduced to students using the part--whole model. Yet the number line is another important representation which can be used to build fraction concepts (Australian Curriculum Assessment and Reporting Authority [ACARA], 2012). Number lines are recognised as key in students' number development not only of fractions, but…

  18. Parallel line scanning ophthalmoscope for retinal imaging

    NARCIS (Netherlands)

    Vienola, Kari V.; Damodaran, Mathi; Braaf, Boy; Vermeer, Koenraad A.; de Boer, Johannes F.

    2016-01-01

    Purpose: To visualize retinal structures using a newly developed parallel line scanning ophthalmoscope (PLSO). Methods: A PLSO was built using a digital micromirror device (DMD) instead of traditional scanning mirrors to scan lines over the field of view (FOV). The DMD consists of 912 × 1140

  19. "And first he drew a line"

    DEFF Research Database (Denmark)

    Graham, Brian Russell

    At the end of “Night the Seventh” of Blake’s The Four Zoas, Blake’s Los, against a background of “furious war”, takes a stance and then performs an act which might seem powerless and quaint against such a backdrop: he draws a line, beginning work consisting of lines which Enitharmon, his companion...

  20. Assembly-Line Manufacturing Industry Simulation

    Science.gov (United States)

    Chamberlain, R. G.; Firnett, P. J.

    1985-01-01

    Assists in economic analysis of production line manufacturing. Originally developed to estimate product price received by hypothetical U.S. industry that manufactures silicon solar modules for use in electricity generation, SAMIS extended and generalized to extent that it simulates operation of many different production line manufacturing industries and/or companies.

  1. Determination of Transmission Line Impedance Matching Parameters

    African Journals Online (AJOL)

    In this work, transmission line impedance matching parameters were determined in Ugbowo ED0024GI Global System for Mobile Communication (GSM) base station in Benin City, Edo State, Nigeria. The transmission line impedance matching parameter viz voltage standing wave ratio was measured with the aid of the ...

  2. Low-energy beam line at KVI

    NARCIS (Netherlands)

    Toprek, D.; Formanoy, I.; Brandenburg, S.

    2006-01-01

    This paper describes the redesign of the low-energy beam line at KVI. Redesigned and properties of the optical elements of the transport beam line is done by using the code COSY INFINITY in the third-order of approximation. The effects of fringe fields of the optical elements are also taken into

  3. Transmission Lines in CMOS: An Explorative Study

    NARCIS (Netherlands)

    Klumperink, Eric A.M.; Kreienkamp, R.; Ellermeyer, T.; Langmann, U.

    On-chip transmission line modelling and design become increasingly important as frequencies are continuously going up. This paper explores possibilities to implement transmission lines on CMOS ICs via coupled coplanar strips. EM-field simulations with SONNET are used to estimate important

  4. Line-mode browser development days

    CERN Multimedia

    Anna Pantelia

    2013-01-01

    Twelve talented web developers have travelled to CERN from all over the world to recreate a piece of web history: the line-mode browser. See the line-mode browser simulator that they created here. Read more about the birth of the web here.

  5. Immunological characterisation of two chicken lines

    NARCIS (Netherlands)

    Kreukniet, M.B.

    1996-01-01


    Two chicken lines were divergently selected for antibody response to sheep red blood cells (SRBC). Several experiments were conducted to investigate what mechanisms the immune system of the chickens uses to realize either the high (H) or the low (L) antibody production. The lines did not

  6. Properties of 3-dimensional line location models

    DEFF Research Database (Denmark)

    Brimberg, Jack; Juel, Henrik; Schöbel, Anita

    2002-01-01

    We consider the problem of locating a line with respect to some existing facilities in 3-dimensional space, such that the sum of weighted distances between the line and the facilities is minimized. Measuring distance using the l\\_p norm is discussed, along with the special cases of Euclidean...

  7. Cavity lining after excavating caries lesions

    DEFF Research Database (Denmark)

    Schwendicke, Falk; Göstemeyer, Gerd; Gluud, Christian

    2015-01-01

    OBJECTIVES: After removal of dentin caries lesions, cavity lining has been advocated. Non-clinical data support this approach, but clinical data are sparse and ambiguous. We aimed at evaluating the benefits and harms of cavity lining using meta-analysis and Trial Sequential Analysis. DATA: We...... included randomized clinical trials comparing restorations without versus with cavity lining for treating primary caries lesions. Only trials reporting failure (defined as need to re-retreat) after ≥1 year follow-up were included. Trial selection, data extraction, and risk of bias assessment were conducted....... STUDY SELECTION: From 128 studies, three randomized trials (89/130 patients or teeth), all treating primary teeth, were included. The trials had high risk of bias. All trials compared no lining versus calcium hydroxide lining after selective caries removal followed by adhesive restoration. Follow...

  8. Low-noise cryogenic transmission line

    Science.gov (United States)

    Norris, D.

    1987-01-01

    New low-noise cryogenic input transmission lines have been developed for the Deep Space Network (DSN) at 1.668 GHz for cryogenically cooled Field Effect Transistors (FET) and High Electron Mobility Transistor (HEMT) amplifiers. These amplifiers exhibit very low noise temperatures of 5 K to 15 K, making the requirements for a low-noise input transmission line critical. Noise contribution to the total amplifier system from the low-noise line is less than 0.5 K for both the 1.668-GHz and 2.25-GHz FET systems. The 1.668-GHz input line was installed in six FET systems which were implemented in the DSN for the Venus Balloon Experiment. The 2.25-GHz input line has been implemented in three FET systems for the DSN 34-m HEF antennas, and the design is currently being considered for use at higher frequencies.

  9. Antarctic Flight Line Maps = Map-Line Indexes of Antarctica Aerial Photos: Pre 1950

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The Antarctic Fight Line Maps collection is comprised of 1:250,000 scale topographic maps over Antarctica with original hand-drawn flight lines for aerial...

  10. Transmission Lines or Poles, Electric - VOLUSIA COUNTY MAJOR POWER LINES (Arcs)

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Volusia County Power Line data was aggregated by using parcel data and visual inspection of 2005 aerial photography to determine centerline of Power Lines Right of...

  11. Cusps enable line attractors for neural computation

    Science.gov (United States)

    Xiao, Zhuocheng; Zhang, Jiwei; Sornborger, Andrew T.; Tao, Louis

    2017-11-01

    Line attractors in neuronal networks have been suggested to be the basis of many brain functions, such as working memory, oculomotor control, head movement, locomotion, and sensory processing. In this paper, we make the connection between line attractors and pulse gating in feed-forward neuronal networks. In this context, because of their neutral stability along a one-dimensional manifold, line attractors are associated with a time-translational invariance that allows graded information to be propagated from one neuronal population to the next. To understand how pulse-gating manifests itself in a high-dimensional, nonlinear, feedforward integrate-and-fire network, we use a Fokker-Planck approach to analyze system dynamics. We make a connection between pulse-gated propagation in the Fokker-Planck and population-averaged mean-field (firing rate) models, and then identify an approximate line attractor in state space as the essential structure underlying graded information propagation. An analysis of the line attractor shows that it consists of three fixed points: a central saddle with an unstable manifold along the line and stable manifolds orthogonal to the line, which is surrounded on either side by stable fixed points. Along the manifold defined by the fixed points, slow dynamics give rise to a ghost. We show that this line attractor arises at a cusp catastrophe, where a fold bifurcation develops as a function of synaptic noise; and that the ghost dynamics near the fold of the cusp underly the robustness of the line attractor. Understanding the dynamical aspects of this cusp catastrophe allows us to show how line attractors can persist in biologically realistic neuronal networks and how the interplay of pulse gating, synaptic coupling, and neuronal stochasticity can be used to enable attracting one-dimensional manifolds and, thus, dynamically control the processing of graded information.

  12. Power line communications theory and applications for narrowband and broadband communications over power lines

    CERN Document Server

    Ferreira, Hendrik C; Newbury, John; Swart, Theo G

    2010-01-01

    Power Line Communications (PLC) is a promising emerging technology, which has attracted much attention due to the wide availability of power distribution lines. This book provides a thorough introduction to the use of power lines for communication purposes, ranging from channel characterization, communications on the physical layer and electromagnetic interference, through to protocols, networks, standards and up to systems and implementations. With contributions from many of the most prominent international PLC experts from academia and industry, Power Line Communications brings togeth

  13. 46 CFR 196.40-15 - Load line marks.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Load line marks. 196.40-15 Section 196.40-15 Shipping... Markings on Vessels § 196.40-15 Load line marks. (a) Vessels assigned a load line shall have the deck line and the load line marks permanently marked or embossed as required by Subchapter E (Load Lines) of...

  14. 46 CFR 42.13-20 - Deck line.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Deck line. 42.13-20 Section 42.13-20 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) LOAD LINES DOMESTIC AND FOREIGN VOYAGES BY SEA General Rules for Determining Load Lines § 42.13-20 Deck line. (a) The deck line is a horizontal line 12...

  15. LINE FUSION GENES: a database of LINE expression in human genes

    Directory of Open Access Journals (Sweden)

    Park Hong-Seog

    2006-06-01

    Full Text Available Abstract Background Long Interspersed Nuclear Elements (LINEs are the most abundant retrotransposons in humans. About 79% of human genes are estimated to contain at least one segment of LINE per transcription unit. Recent studies have shown that LINE elements can affect protein sequences, splicing patterns and expression of human genes. Description We have developed a database, LINE FUSION GENES, for elucidating LINE expression throughout the human gene database. We searched the 28,171 genes listed in the NCBI database for LINE elements and analyzed their structures and expression patterns. The results show that the mRNA sequences of 1,329 genes were affected by LINE expression. The LINE expression types were classified on the basis of LINEs in the 5' UTR, exon or 3' UTR sequences of the mRNAs. Our database provides further information, such as the tissue distribution and chromosomal location of the genes, and the domain structure that is changed by LINE integration. We have linked all the accession numbers to the NCBI data bank to provide mRNA sequences for subsequent users. Conclusion We believe that our work will interest genome scientists and might help them to gain insight into the implications of LINE expression for human evolution and disease. Availability http://www.primate.or.kr/line

  16. Butterfly valve of all rubber lining type

    Energy Technology Data Exchange (ETDEWEB)

    Shimada, Shosaku; Nakatsuma, Sumiya (Kubota Ltd., Osaka (Japan)); Sasaki, Iwao; Aoki, Naoshi

    1982-08-01

    The valves used for the circulating water pipes for condensers in nuclear and thermal power stations have become large with the increase of power output, and their specifications have become strict. The materials for the valves change from cast iron to steel plate construction. To cope with sea water corrosion, rubber lining has been applied to the internal surfaces of valve boxes, and the build-up welding of stainless steel has been made on the edges of valves. However, recently it is desired to develop butterfly valves, of which the whole valve disks are lined with hard rubber. For the purpose of confirming the performance of large bore valves, a 2600 mm bore butterfly valve of all rubber lining type was used, and the opening and closing test of 1100 times was carried out by applying thermal cycle and pressure difference and using artifical sea water. Also the bending test of hard rubber lining was performed with test pieces. Thus, it was confirmed that the butterfly valves of all rubber lining type have the performance exceeding that of the valves with build-up welding. The course of development of the valves of all rubber lining type, the construction and the items of confirmation by tests of these valves, and the tests of the valve and the hard rubber lining described above are reported.

  17. Lip line preference for variant face types.

    Science.gov (United States)

    Anwar, Nabila; Fida, Mubassar

    2012-06-01

    To determine the effect of altered lip line on attractiveness and to find preferred lip line for vertical face types in both genders. Cross-sectional analytical study. The Aga Khan University Hospital, Karachi, from May to July 2009. Photographs of two selected subjects were altered to produce three face types for the same individual with the aim of keeping the frame of the smile constant. Lip line was then altered for both the subjects as: both dentitions visible, upper incisors visible, upper incisors and 2 mm gum and 4 mm gum visible. The pictures were rated by different professionals for attractiveness. Descriptive statistics for the raters and multiple factor ANOVA was used to find the most attractive lip line. The total number of raters was 100 with the mean age of 30.3 ± 8 years. The alterations in the smile parameters produced statistically significant difference in the attractiveness of faces, whereas the perception difference was found to be insignificant amongst raters of different professions. Preferred lip line was the one showing only the upper incisors in dolico and mesofacial male and female genders whereas 2 mm gum show was preferred in brachyfacial subjects. The variability in lip line showed significant difference in the perceived attractiveness. Preferred lip lines as the one showing only the upper incisors in dolico and mesofacial male and female genders whereas 2 mm gum show was preferred in brachyfacial subjects.

  18. Function of lateral line canal morphology.

    Science.gov (United States)

    Klein, Adrian; Bleckmann, Horst

    2015-01-01

    Fish perceive water motions and pressure gradients with their lateral line. Lateral line information is used for prey detection, spatial orientation, predator avoidance, schooling behavior, intraspecific communication and station holding. The lateral line of most fishes consists of superficial neuromasts (SNs) and canal neuromasts (CNs). The distribution of SNs and CNs shows a high degree of variation among fishes. Researchers have speculated for decades about the functional significance of this diversity, often without any conclusive answers. Klein et al. (2013) examined how tubules, pore number and pore patterns affect the filter properties of lateral line canals in a marine teleost, the black prickleback (Xiphister atropurpureus). A preliminary mathematical model was formulated and biomimetic sensors were built. For the present study the mathematical model was extended to understand the major underlying principle of how canal dimensions influence the filter properties of the lateral line. Both the extended mathematical model and the sensor experiments show that the number and distribution of pores determine the spatial filter properties of the lateral line. In an environment with little hydrodynamic noise, simple and complex lateral line canals have comparable response properties. However, if exposed to highly turbulent conditions, canals with numerous widely spaced pores increase the signal to noise ratio significantly. © 2014 International Society of Zoological Sciences, Institute of Zoology/Chinese Academy of Sciences and Wiley Publishing Asia Pty Ltd.

  19. Dynamic line-by-line pulse shaping with GHz update rate.

    Science.gov (United States)

    Akbulut, M; Bhooplapur, S; Ozdur, I; Davila-Rodriguez, J; Delfyett, P J

    2010-08-16

    We introduce a novel scheme for dynamic line-by-line pulse shaping with GHz update rates. Four lines of an optical frequency comb source are used to injection-lock four individual VCSEL, which are subsequently electrically modulated at 0.4 to 1 GHz through current modulation. This concept could be considered a completely new way of pulse shaping as the light is not simply modified, but rather regenerated with the desired properties. We also discuss an important drawback of line-by-line pulse shapers that ultimately limits the modulation speed capability.

  20. Microwave line of sight link engineering

    CERN Document Server

    Angueira, Pablo

    2012-01-01

    A comprehensive guide to the design, implementation, and operation of line of sight microwave link systems The microwave Line of Sight (LOS) transport network of any cellular operator requires at least as much planning effort as the cellular infrastructure itself. The knowledge behind this design has been kept private by most companies and has not been easy to find. Microwave Line of Sight Link Engineering solves this dilemma. It provides the latest revisions to ITU reports and recommendations, which are not only key to successful design but have changed dramatically in

  1. Line-focus concentrating collector program

    Science.gov (United States)

    Dugan, V. L.

    1980-01-01

    The Line-Focus Concentrating Collector Program has emphasized the development and dissemination of concentrating solar technology in which the reflected sunlight is focused onto a linear or line receiver. Although a number of different types of line-focus concentrators were developed, the parabolic trough has gained the widest acceptance and utilization within the industrial and applications sectors. The trough is best applied for application scenarios which require temperatures between 140 and 600 F. Another concept, the bowl, is investigated for applications which may require temperatures in the range between 600 and 1200 F. Current technology emphases are upon the reduction of system installation cost and the implementation of production oriented engineering.

  2. Spinal Test Suites for Software Product Lines

    Directory of Open Access Journals (Sweden)

    Harsh Beohar

    2014-03-01

    Full Text Available A major challenge in testing software product lines is efficiency. In particular, testing a product line should take less effort than testing each and every product individually. We address this issue in the context of input-output conformance testing, which is a formal theory of model-based testing. We extend the notion of conformance testing on input-output featured transition systems with the novel concept of spinal test suites. We show how this concept dispenses with retesting the common behavior among different, but similar, products of a software product line.

  3. Brand Equity and Vertical Product Line Extent

    OpenAIRE

    Taylor Randall; Karl Ulrich; David Reibstein

    1998-01-01

    This paper addresses the question of how the vertical structure of a product line relates to brand equity. Does the presence of “premium” or high-quality products in a product line enhance brand equity? Conversely, does the presence of “economy” or low-quality products in a product line diminish brand equity? Economists and marketing researchers refer to variation in quality levels of products within a category as “vertical” differentiation, whereas variation in the function or “category” of ...

  4. Coupled Transmission Lines as Impedance Transformer

    DEFF Research Database (Denmark)

    Jensen, Thomas; Zhurbenko, Vitaliy; Krozer, Viktor

    2007-01-01

    A theoretical investigation of the use of a coupled line section as an impedance transformer is presented. We show how to properly select the terminations of the coupled line structures for effective matching of real and complex loads in both narrow and wide frequency ranges. The corresponding....... Wideband matching performance with relative bandwidth beyond 100% and return loss > 20 dB is demonstrated both theoretically and experimentally. Good agreement is achieved between the measured and predicted performance of the coupled line transformer section....

  5. On-line job marketplaces: sucess strategy

    OpenAIRE

    Sarapulov, Andrey

    2010-01-01

    This master thesis is focused on freelance type work available though on-line marketplaces such as oDesk and ways to get hired. First chapter introduces on-line working and lead though the world statistics powered by oDesk. Numbers present working hours, geographical coverage and skills distribution. It makes reader familiar with advantages and disadvantages of freelancing. Second chapter is related to on-line job marketplaces, in particularly to oDesk (www.odesk.com). It focuses on pros and ...

  6. RF and microwave coupled-line circuits

    CERN Document Server

    Mongia, R K; Bhartia, P; Hong, J; Gupta, K C

    2007-01-01

    This extensively revised edition of the 1999 Artech House classic, RF and Microwave Coupled-Line Circuits, offers you a thoroughly up-to-date understanding of coupled line fundamentals, explaining their applications in designing microwave and millimeter-wave components used in today's communications, microwave, and radar systems. The Second Edition includes a wealth of new material, particularly relating to applications. You find brand new discussions on a novel simple design technique for multilayer coupled circuits, high pass filters using coupled lines, software packages used for filter des

  7. Spectral line absorption measurement using optical cavities.

    Science.gov (United States)

    Blanaru, D. L.

    1973-01-01

    A simple technique using a conventional gas laser with spherical mirrors having identical radii of curvature in the nonoscillating regime for spectral line absorption measurements is described and applications for laser work are suggested. The theory of the measurement carried out in the geometrical optical approach for Doppler-broadened lines was checked experimentally and conditions are specified for which measurement inaccuracies of the order of 1% for the peak value of the line absorption coefficient can be obtained. Since the device provides a fine adjustment of the cavity losses, formation of the diffraction modes could be observed in the preoscillating regime of the optical cavity.

  8. Emission Lines of Northern Planetary Nebulae

    Science.gov (United States)

    Aksaker, Nazim; Yerli, Sinan K.; Kızıloǧlu, Ümit; Atalay, Betül

    2017-10-01

    In this work, we present results of long slit spectrophotometric emission line flux observations of selected planetary nebulae (PNe). We have measured absolute fluxes and equivalent widths (EW) of all observable emission lines. In addition to these observations, electron temperatures (Te), densities (Ne), and chemical abundances were also calculated. The main purpose of this work is to fill the gaps in emission line flux standards for the northern hemisphere. It is expected that the measured fluxes would be used as standard data set for further photometric and spectrometric measurements of HII regions, supernova remnants etc.

  9. Elk and plants thrive near power lines

    Energy Technology Data Exchange (ETDEWEB)

    Lustre, L.

    1997-11-01

    Butterflies and elk gather in clearings near power line right-of-ways and on the edges of such clearings, where the wild flowers and plants that have widely disappeared as a result of intensive farming and subsurface drainage of fields have found a good habitat. Ornamental coniferous trees, various herbs and assorted berries do well and can be harvested near power lines from woodland clearings once thought unfit for cultivation. IVS, the nationwide network company, takes part in many projects aiming both to increase productive utilization of land areas under power lines and to promote biodiversity

  10. Model to Design Drip Hose Lateral Line

    Science.gov (United States)

    Ludwig, Rafael; Cury Saad, João Carlos

    2014-05-01

    Introduction The design criterion for non-pressure compensating drip hose is normally to have 10% of flow variation (Δq) in the lateral line, corresponding to 20% of head pressure variation (ΔH). Longer lateral lines in drip irrigation systems using conventional drippers provide cost reduction, but it is necessary to obtain to the uniformity of irrigation [1]. The use of Δq higher levels can provide longer lateral lines. [4] proposes the use of a 30% Δq and he found that this value resulted in distribution uniformity over 80%. [1] considered it is possible to extend the lateral line length using two emitters spacing in different section. He assumed that the spacing changing point would be at 40% of the total length, because this is approximately the location of the average flow according with [2]. [3] found that, for practical purposes, the average pressure is located at 40% of the length of the lateral line and that until this point it has already consumed 75% of total pressure head loss (hf ). In this case, the challenge for designers is getting longer lateral lines with high values of uniformity. Objective The objective of this study was to develop a model to design longer lateral lines using non-pressure compensating drip hose. Using the developed model, the hypotheses to be evaluated were: a) the use of two different spacing between emitters in the same lateral line allows longer length; b) it is possible to get longer lateral lines using high values of pressure variation in the lateral lines since the distribution uniformity stays below allowable limits. Methodology A computer program was developed in Delphi® based on the model developed and it is able to design lateral lines in level using non-pressure compensating drip hose. The input data are: desired distribution uniformity (DU); initial and final pressure in the lateral line; coefficients of relationship between emitter discharge and pressure head; hose internal diameter; pipe cross-sectional area

  11. Tunable line width all solid state double spectral line sodium beacon laser

    Science.gov (United States)

    Lu, Yanhua; Zhang, Lei; Xu, Xiafei; Ren, Huaijin; Wei, Bin; Yuan, Liao; Gong, Shenggang; Li, Tao; Gu, Jingliang; Wan, Min; Fan, Guobin

    2017-10-01

    We developed a tunable-line-width 101 W average-power all-solid-state 589nm double spectral line sodium beacon laser. The laser was based on the technical route of 1064nm and 1319nm Nd:YAG laser extra cavity sum frequency generation. The laser contained two spectral lines: 589.1591 nm and 589.1571 nm. The former line was matched to the sodium D2a absorption line with the average power of 81W, while the other line was matched to the sodium D2b absorption line with the average power of 20W. The beam quality of the two spectral line lasers was both less than 1.3. The two lasers were polarized-combined to transmit coaxially. The initial line width of the laser was about 0.3GHz, which was in the comb-like discrete structure of about three longitudinal modes. We used a white noise generator to modulate the 1064nm single frequency seed laser in frequency domain. The line width's tunability was accomplished by tuning the driving power of the white noise generator. The final line width tuning range of the 589nm laser was 0.3GHz to 1.1GHz.

  12. Integration of On-Line and Off-Line Diagnostic Algorithms for Aircraft Engine Health Management

    Science.gov (United States)

    Kobayashi, Takahisa; Simon, Donald L.

    2007-01-01

    This paper investigates the integration of on-line and off-line diagnostic algorithms for aircraft gas turbine engines. The on-line diagnostic algorithm is designed for in-flight fault detection. It continuously monitors engine outputs for anomalous signatures induced by faults. The off-line diagnostic algorithm is designed to track engine health degradation over the lifetime of an engine. It estimates engine health degradation periodically over the course of the engine s life. The estimate generated by the off-line algorithm is used to update the on-line algorithm. Through this integration, the on-line algorithm becomes aware of engine health degradation, and its effectiveness to detect faults can be maintained while the engine continues to degrade. The benefit of this integration is investigated in a simulation environment using a nonlinear engine model.

  13. Western Alaska ESI: FISHL (Fish Lines)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for anadromous fish species in Western Alaska. Vector lines in this data set represent species occurrences...

  14. Handbook of spectral lines in diamond

    CERN Document Server

    Dischler, Bernhard

    2012-01-01

    This handbook is a breakthrough in the understanding of the large number of spectral lines in diamond. Data on more than 2000 lines and bands are presented in 200 tables, including many unpublished results. With a novel organization scheme, the search for a specific line is greatly simplified as a benefit for researchers and students. In order to meet the interest in the understanding of the spectra, structure assignments for 80 % of the lines are given, of which 15 % only were published before. The majority of the structures for the 300 centers is explained in most cases for the first time. A key instrument in the interpretation is the analysis by donor-acceptor pair transitions. In a special chapter 95 such centers are listed and discussed, of which only two have been published before, the first one by the present author in 1994.

  15. Metro orange line BRT project evaluation.

    Science.gov (United States)

    2011-10-01

    In partnership with the Los Angeles County Metropolitan Transportation Authority (Metro) and the Federal Transit Administration (FTA), the National Bus Rapid Transit Institute (NBRTI) conducted an evaluation of the Metro Orange Line BRT service, whic...

  16. First line management in the public sector

    DEFF Research Database (Denmark)

    Voxted, Søren

    first-line managers’ work and to illuminate differences between first-line managers from different occupational groups. The second question relates to current debate about the degree of professionalized management among the municipal first-line managers. In both the international and Danish management......, in some examples, explicit standards are set for what share of the manager’s working time should be used on management and what share should be used on participation in operational tasks. The main question is how the division between exercising leadership and participating in operational task is evident......The paper will examines and discusses the results from a structured observational study, wherein 50 first-line managers from the public sector in Denmark in five areas of employment where observed. These observational studies are a key contribution in the ‘greenhouse for management’ project...

  17. VT Electric Transmission Line Corridors - substation points

    Data.gov (United States)

    Vermont Center for Geographic Information — (Link to Metadata) The ELTRN layer depicts electric transmission line corridors in Vermont. Various methods have been used to digitize features. The data layer...

  18. Influence of Microfield Directionality on Line Shapes

    Directory of Open Access Journals (Sweden)

    Annette Calisti

    2014-06-01

    Full Text Available In the framework of the Spectral Line Shapes in Plasmas Code Comparison Workshop (SLSP, large discrepancies appeared between the different approaches to account for ion motion effects in spectral line shape calculations. For a better understanding of these effects, in the second edition of the SLSP in August, 2013, two cases were dedicated to the study of the ionic field directionality on line shapes. In this paper, the effects of the direction and magnitude fluctuations are separately analyzed. The effects of two variants of electric field models, (i a pure rotating field with constant magnitude and (ii a time-dependent magnitude field in a given direction, together with the effects of the time-dependent ionic field on shapes of the He II Lyman-α and -β lines for different densities and temperatures, are discussed.

  19. On-line chemical composition analyzer development

    Energy Technology Data Exchange (ETDEWEB)

    Garrison, A.A.

    1993-01-01

    This report relates to the development of an on-line Raman analyzer for control of a distillation column. It is divided into: program issues, experimental control system evaluation, energy savings analysis, and reliability analysis. (DLC)

  20. Louisiana ESI: HYDRO (Hydrography Lines and Polygons)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing coastal hydrography used in the creation of the Environmental Sensitivity Index (ESI) for coastal...

  1. Section Level Public Land Survey - lines

    Data.gov (United States)

    Minnesota Department of Natural Resources — Public Land Survey line delineations to the section level. Developed from manually digitized section corners captured from paper USGS seven and one-half map sources.

  2. Digital Line Graphs (DLG) 24K

    Data.gov (United States)

    Kansas Data Access and Support Center — Digital line graph (DLG) data are digital representations of cartographic information. DLG's of map features are converted to digital form from maps and related...

  3. Digital Line Graphs (DLG) 100K

    Data.gov (United States)

    Kansas Data Access and Support Center — Digital line graph (DLG) data are digital representations of cartographic information. DLG's of map features are converted to digital form from maps and related...

  4. Controlled Compact High Voltage Power Lines

    Directory of Open Access Journals (Sweden)

    Postolati V.

    2016-04-01

    Full Text Available Nowadays modern overhead transmission lines (OHL constructions having several significant differences from conventional ones are being used in power grids more and more widely. Implementation of compact overhead lines equipped with FACTS devices, including phase angle regulator settings (compact controlled OHL, appears to be one of the most effective ways of power grid development. Compact controlled AC HV OHL represent a new generation of power transmission lines embodying recent advanced achievements in design solutions, including towers and insulation, together with interconnection schemes and control systems. Results of comprehensive research and development in relation to 110–500kV compact controlled power transmission lines together with theoretical basis, substantiation, and methodological approaches to their practical application are presented in the present paper.

  5. Stitch and hem and line and flight

    Science.gov (United States)

    Thorp, John Daniel

    Stitch and hem and line and flight appears in four formats. There is this present one, which adheres to the manuscript design requirements as outlined by The Graduate School at The University of Utah; there is another which is a book six inches high by nine inches wide, printed in three colors, with text aligned to its gutter; and there is a broadside printed from the same forms of standing metal type on a single twelve-inch-high by nineteen-inch-wide page, where all spreads are registered to the same points so that all lines of all sections overlap exactly, excluding the last lines of the longest section, which are left immediately readable. The second and the third formats were produced in editions of fifty each, and copies are available to the reader through the Special Collections Library at the J. Willard Marriott Library. The text in the book you're holding is built from scans taken from the original letterpress pages, and so honors typos not caught before production during proofreading, but does not honor the final runs of production which overprint eight typos and overprint one duplicated "no." The text here stands as an uncorrected and reformatted transcript of the letterpress-printed pages, since all "characters must be clear and sharp. Smudged, indistinct, or blurred letters are not acceptable." The present format cannot ask (at least not in the same way) if the techniques and repetitive labor of hand printing can be read just as one might read any of the other more familiar small crises in a work: the line break, the influence of a culture or history on that work, anagnorisis, exegesis, etc. The present format doesn't seem to ask questions like: what happens to a love song when you can't read it or hear it? How does a line or letter make itself mean when cast in metal, stood up and pressed onto paper? Still, the present format is concerned with how a line sits on a page and how a line is like love is like highs is like sand. The text all these formats

  6. Maryland ESI: HYDRO (Hydrography Lines and Polygons)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing coastal hydrography used in the creation of the Environmental Sensitivity Index (ESI) for Maryland. The...

  7. Alabama ESI: HYDRO (Hydrography Lines and Polygons)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing coastal hydrography used in the creation of the Environmental Sensitivity Index (ESI) for Alabama. The...

  8. Virginia ESI: HYDRO (Hydrography Lines and Polygons)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector lines and polygons representing coastal hydrography used in the creation of the Environmental Sensitivity Index (ESI) for Virginia. The...

  9. Linear scleroderma following Blaschko′s lines

    Directory of Open Access Journals (Sweden)

    Mukhopadhyay Amiya

    2005-01-01

    Full Text Available Blaschko′s lines form a pattern, which many diseases are found to follow, but linear scleroderma following Blaschko′s lines is a controversial entity rarely reported in the literature. A 24-year-old man presented with multiple linear, atrophic, hyperpigmented lesions punctuated by areas of depigmentations on the left half of the trunk distributed on the anterior, lateral and posterior aspects. The lesions were distributed in a typical S-shaped line. Antinuclear antibody and antihistone antibody tests were negative. Histopathological examination of the skin from the affected area showed features suggestive of scleroderma. Here, we present a case of linear scleroderma following Blaschko′s lines in a male patient - an entity reported only three times so far.

  10. Electrical Transmission Line Diametrical Retention Mechanism

    Science.gov (United States)

    Hall, David R.; Hall, Jr., H. Tracy; Pixton, David; Dahlgren, Scott; Sneddon, Cameron; Briscoe, Michael; Fox, Joe

    2006-01-03

    The invention is a mechanism for retaining an electrical transmission line. In one embodiment of the invention it is a system for retaining an electrical transmission line within downhole components. The invention allows a transmission line to be attached to the internal diameter of drilling components that have a substantially uniform drilling diameter. In accordance with one aspect of the invention, the system includes a plurality of downhole components, such as sections of pipe in a drill string, drill collars, heavy weight drill pipe, and jars. The system also includes a coaxial cable running between the first and second end of a drill pipe, the coaxial cable having a conductive tube and a conductive core within it. The invention allows the electrical transmission line to withstand the tension and compression of drill pipe during routine drilling cycles.

  11. Twisted shield-pair transmission line

    Science.gov (United States)

    Lind, W. N.; Waddy, G. H.

    1977-01-01

    Lightweight cable forms balanced transmission line and replaces costlier coaxial cables for multiplex-signal transmission. Cable is fabricated with carefully-controlled electrical characteristics and functions without tuning networks at frequencies up to 10 MHz.

  12. Coding for Single-Line Transmission

    Science.gov (United States)

    Madison, L. G.

    1983-01-01

    Digital transmission code combines data and clock signals into single waveform. MADCODE needs four standard integrated circuits in generator and converter plus five small discrete components. MADCODE allows simple coding and decoding for transmission of digital signals over single line.

  13. North Slope, Alaska ESI: FISHL (Fish Lines)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains sensitive biological resource data for anadromous and freshwater fish species for the North Slope of Alaska. Vector lines in this data set...

  14. Southeast Alaska ESI: FISHL (Fish Lines)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains biological resource data for anadromous fish streams in Southeast Alaska. Vector lines in this data set represent locations of fish streams....

  15. Mooring Line for an Oceanographic Buoy System

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A mooring line for an oceanographic buoy system includes four sections. The first section is a protected cable that is connectable to the buoy. The second section is...

  16. Seismic Lines in Louisiana and Texas [gcseismicg

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The lines shown are those used by the USGS in developing the framework geology and models used in assessing the oil and gas resources of the Gulf Coast Region. The...

  17. substitution line for resistance to stripe rust

    Indian Academy of Sciences (India)

    2011-08-19

    2D) substitution line for resistance to stripe rust. MENGPING LEI, GUANGRONG LI, SUFEN ZHANG, CHENG LIU and ZUJUN YANG. ∗. School of Life Science and Technology, University of Electronic Science and Technology ...

  18. HealthLines: Facts About Fat

    Science.gov (United States)

    ... Current Issue Past Issues Health Lines Facts About Fat Past Issues / Fall 2008 Table of Contents For ... Writer, NLM Scientists are learning more about our fat cells, and their findings could explain why some ...

  19. The inverse scattering problem for transmission lines

    Science.gov (United States)

    Kay, I.

    1972-01-01

    A number of exact and approximate methods for solving the inverse scattering problem for transmission lines are reviewed. In particular, the application to transmission lines of Marcenko's version of the Gelfand-Levitan exact method for the quantum mechanical problem is compared with a more direct approach based on a different version of the Gelfand-Levitan method. In addition, some aspects of the lack of uniqueness of solutions are discussed, and some open questions related to the inverse scattering problem are suggested.

  20. Pool boiling enhancement through contact line augmentation

    Science.gov (United States)

    Raghupathi, P. A.; Kandlikar, S. G.

    2017-05-01

    In addition to transient conduction, microconvection, and microlayer evaporation, contact line region heat transfer has been identified as an important mode of heat transfer during boiling. In this work, we demonstrate that generating additional contact line regions within the base of a nucleating bubble leads to critical heat flux (CHF) enhancement. The creation of a liquid meniscus adjacent to 10-20 μm deep microgrooves in the bubble base area was responsible for the generation of the additional contact line regions. The depth of the microgrooves was determined such that a sufficient reservoir of liquid is present in the meniscus to sustain evaporation in the contact line region throughout the bubble cycle. The effective contact line length at the base of the bubble was seen to be a good indicator of the CHF (wetted area) over the surface. The microgroove geometry played a significant role in influencing the bubble dynamics and bubble departure diameter during boiling. It was seen that the bubbles were able to bridge and grow over the shallow microgrooves of 10-20 μm depth and generate additional contact line regions but were pinned and constrained within the grooves in the case of the microgrooves deeper than 100 μm. For shallow grooves, narrow grooves resulted in smaller bubbles, which in turn reduced the contact line length. The findings of this work could be used to design heat transfer surfaces that significantly enhance the contact line region contribution and CHF by placing shallow enhancement features on the surface of the heater.

  1. Daresbury on-line isotope separator (DOLIS)

    Energy Technology Data Exchange (ETDEWEB)

    Grant, I.S.; Eastham, D.A.; Groves, J.; Tolfree, D.W.L.; Walker, P.M.; Green, V.R.; Rikovska, J.; Stone, N.J.; Hamilton, W.D.

    1987-05-01

    The isotope separator DOLIS, which is on-line to the Daresbury Laboratory's 20-MV tandem accelerator, is used to measure nuclear moments and decay schemes. Separated beams may be collected on a tape and transported to a counting station, implanted directly into a host lattice at on-line temperatures down to less than 10 mK, or allowed to interact with a collinear laser beam. The present status of DOLIS and its ancillary equipment is described.

  2. Lines, dots and spirals on Peruvian land

    OpenAIRE

    Sparavigna, Amelia Carolina

    2011-01-01

    The most famous geoglyphs of Peru are the "Nazca Lines". Considered as one of the mysteries of the ancient world, they have been included among the UNESCO World Heritage Sites. Located in a large region between the towns of Nazca and Palpa, these lines create shapes of animals ranging in size up to 300 m. The archaeological site is under investigation with remote science technologies.

  3. Drag reduction in riblet-lined pipes

    Energy Technology Data Exchange (ETDEWEB)

    Enyutin, G.V.; Lashkov, Yu.A.; Samoilova, N.V.

    1995-07-01

    The possibilities of reducing the drag in pipes with a circular cross section by lining them with riblets have been investigated experimentally for developed turbulent air flow. The maximum drag reduction of 6-7% in the riblet-lined as compared with the smooth pipe was obtained for a dimensionless riblet pitch, expressed in law-of-the-wall parameters, s{sup +} = 14-18.

  4. The National Shipbuilding Research Program. Line Heating

    Science.gov (United States)

    1982-11-01

    their manufacture. This approach led to the development of remarkable line-heating aids and work instructions by Ishikawajima - Harima Heavy Industries ...Ltd. REFERENCES 1 ) 2 ) 3 ) 4 ) 5 ) 6 ) Shipbuilding Department of Ishikawajima - Harima Heavy Industries : “Bending Process of Line-Heated Plates...Division. The material on which this book is based was compiled by a project team led by S. Nakanishi, International Division, Ishikawajima - Harima Heavy

  5. On-Line Acquisitions by LOLITA

    Directory of Open Access Journals (Sweden)

    Frances G. Spigai

    1970-12-01

    Full Text Available The on-line acquisition program (LOLITA in use at the Oregon State University Library is described in terms of development costs, equipment requirements, and overall design philosophy. In particular, the record format and content of records in the on-order file, and the on-line processing of these records (input, search, correction, output using a cathode ray tube display terminal are detailed.

  6. Transmission Line Resonator Segmented with Series Capacitors

    DEFF Research Database (Denmark)

    Zhurbenko, Vitaliy; Boer, Vincent; Petersen, Esben Thade

    2016-01-01

    Transmission line resonators are often used as coils in high field MRI. Due to distributed nature of such resonators, coils based on them produce inhomogeneous field. This work investigates application of series capacitors to improve field homogeneity along the resonator. The equations for optimal...... values of evenly distributed capacitors are presented. The performances of the segmented resonator and a regular transmission line resonator are compared....

  7. Covered by lines and Conic connected varieties

    Directory of Open Access Journals (Sweden)

    Alex Massarenti

    2011-12-01

    Full Text Available We study some properties of an embedded variety covered by lines and give a numerical criterion ensuring the existence of a singular conic through two of its general points. We show that our criterion is sharp. Conic-connected, covered by lines, QEL, LQEL, prime Fano, defective, and dual defective varieties are closely related. We study some relations between the above mentioned classes of objects using basic results by Ein and Zak.

  8. Lineær Algebra via Eksempler

    DEFF Research Database (Denmark)

    Salomonsen, Hans Anton; Nielsen, Holger Andreas

    Notesæt til anvendelse i kurserne Calculus 1 og 2. Den elementære lineære algebra præsenteres gennem en række gennemregnede eksempler.......Notesæt til anvendelse i kurserne Calculus 1 og 2. Den elementære lineære algebra præsenteres gennem en række gennemregnede eksempler....

  9. RF transmission lines on silicon substrates

    OpenAIRE

    Ponchak, George E.

    1999-01-01

    A review of RF transmission lines on silicon substrates is presented. Through measurements and calculated results, it is shown that attenuation is dominated by conductor loss if silicon substrates with a resistivity greater than 2500 Q-cm are used. Si passivation layers affect the transmission line attenuation; however, measured results demonstrate that passivation layers do not necessarily increase attenuation. If standard, low resistivity Si wafers must be used, alternative transmission lin...

  10. Flow lines and export lines of Sabalo Gas Field - the engineering of a complex job; Flow lines e export lines de Sabalo - a engenharia da complexidade

    Energy Technology Data Exchange (ETDEWEB)

    Serodio, Conrado Jose Morbach [GDK Engenharia, Salvador, BA (Brazil)

    2003-07-01

    The construction of the natural gas flow lines and export lines system of the Sabalo field, in the far South of Bolivia is an unique job in the pipeline construction area. Its execution is a turning point in terms of engineering and construction technology in this industry. Among the Aguarague Cordillera (mountains), it runs across rocky canyons for more than 5 km, a 2.100 mt long narrow tunnel to overcome the mountains and steep hills along all the ROW length, with a total extension of 70 km, in line pipes ranging from 10'' and 12'' for the flow lines, 28'' for the gas export line and 8' for the condensate line. An integrated construction work plan was settled in order to face and overcome the complex construction situations found in every feet of the pipeline. Four simultaneous work sites were mobilized, 8 independent work fronts, 700 professionals and more than 150 pieces of heavy construction equipment, brought from 3 different countries. Special techniques were adopted also to handle the challenging detail engineering . All in all, the correct conjunction of a sound engineering work, planning, human resources and equipment and the managing flexibility to create alternatives and solutions at the fast pace required by a dynamic work schedule were essential to succeed, in a job with no room for mistakes. The successfully job completion open new possibilities to other challenging projects alike.(author)

  11. Morphological variation in maize inbred lines

    Directory of Open Access Journals (Sweden)

    Jiban Shrestha

    2014-05-01

    Full Text Available In order to identify morphological variation in maize inbred lines, one hundred five inbred lines were planted under randomized complete block design with two replications at research field of National Maize Research Program, Rampur, Chitwan, Nepal during summer season (March to June, 2010. Descriptive statistics and cluster analysis were done. The results revealed a wide range of morphological variation among the tested inbred lines. The inbred lines grouped in cluster 4 namely PUTU-13, L-9, RL-105, RL-197, RL-103, RML-9, RML-41, RL-165, RL-36, RL-76, RL-125, RL-30-3, L-6, RL-107, RL-174, RL-41, L-13, RML-76 and L-5 had 0.833 days anthesis-silking interval and earlier in flowering (tasseling in 54.50 days and silking in 55.33 days. Moreover they consisted of 1.16 plant aspect, 1.25 ear aspect, 33.08 cm tassel length and 13.5 tassel branch number. Among tested lines, the above inbred lines had better morphological traits, so it was concluded that they were good candidates for development of hybrids and synthetic varieties. DOI: http://dx.doi.org/10.3126/ije.v3i2.10521 International Journal of the Environment Vol.3(2 2014: 98-107

  12. Cold-induced retrotransposition of fish LINEs.

    Science.gov (United States)

    Chen, Shue; Yu, Mengchao; Chu, Xu; Li, Wenhao; Yin, Xiujuan; Chen, Liangbiao

    2017-08-20

    Classes of retrotransposons constitute a large portion of metazoan genome. There have been cases reported that genomic abundance of retrotransposons is correlated with the severity of low environmental temperatures. However, the molecular mechanisms underlying such correlation are unknown. We show here by cell transfection assays that retrotransposition (RTP) of a long interspersed nuclear element (LINE) from an Antarctic notothenioid fish Dissostichus mawsoni (dmL1) could be activated by low temperature exposure, causing increased dmL1 copies in the host cell genome. The cold-induced dmL1 propagation was demonstrated to be mediated by the mitogen-activated protein kinases (MAPK)/p38 signaling pathway, which is activated by accumulation of reactive oxygen species (ROS) in cold-stressed conditions. Surprisingly, dmL1 transfected cells showed an increase in the number of viable cells after prolonged cold exposures than non-transfected cells. Features of cold inducibility of dmL1 were recapitulated in LINEs of zebrafish origin both in cultured cell lines and tissues, suggesting existence of a common cold-induced LINE amplification in fishes. The findings reveal an important function of LINEs in temperature adaptation and provid insights into the MAPK/p38 stress responsive pathway that shapes LINE composition in fishes facing cold stresses. Copyright © 2017. Published by Elsevier Ltd.

  13. Staple line oversewing during laparoscopic sleeve gastrectomy.

    Science.gov (United States)

    Wang, H; Lu, J; Feng, J; Wang, Z

    2017-09-01

    Introduction This meta-analysis was performed to assess the possible benefits of staple line oversewing during laparoscopic sleeve gastrectomy. Methods A comprehensive search up to February 2017 was conducted on PubMed, the Web of Science™ and Embase™. All eligible studies were included, and the outcomes of staple line bleeding and leak, overall complications and operative time were pooled. Results A total of 7 randomised controlled trials involving 845 patients (428 cases and 417 controls) were analysed. There was no significant difference in staple line bleeding (relative risk [RR]: 0.858, 95% confidence interval [CI]: 0.343-2.143, p=0.742), leak (RR: 0.650, 95% CI: 0.257-1.644, p=0.363) or overall complications (RR: 0.913, 95% CI: 0.621-1.342, p=0.644) between the oversewing group and the patients who did not have oversewing. Oversewing of the staple line was associated with a longer operative time (weighted mean difference: 14.400, 95% CI: 7.198-21.602, p=0.000). Conclusions Oversewing the staple line during laparoscopic sleeve gastrectomy does not decrease the risk of staple line bleeding, leakage or overall complications but it does prolong the operative time.

  14. Real quartic surfaces containing 16 skew lines

    Directory of Open Access Journals (Sweden)

    Isidro Nieto

    2004-01-01

    Full Text Available It is well known that there is an open three-dimensional subvariety Ms of the Grassmannian of lines in ℙ3 which parametrizes smooth irreducible complex surfaces of degree 4 which are Heisenberg invariant, and each quartic contains 32 lines but only 16 skew lines, being determined by its configuration of lines, are called a double 16. We consider here the problem of visualizing in a computer the real Heisenberg invariant quartic surface and the real double 16. We construct a family of points l∈Ms parametrized by a two-dimensional semialgebraic variety such that under a change of coordinates of l into its Plüecker, coordinates transform into the real coordinates for a line L in ℙ3, which is then used to construct a program in Maple 7. The program allows us to draw the quartic surface and the set of transversal lines to L. Additionally, we include a table of a group of examples. For each test example we specify a parameter, the viewing angle of the image, compilation time, and other visual properties of the real surface and its real double 16. We include at the end of the paper an example showing the surface containing the double 16.

  15. Transmission line design for the lunar environment

    Science.gov (United States)

    Gaustad, Krista L.; Gordon, Lloyd B.

    1990-01-01

    How the mass, operating temperature, and efficiency of a transmission line operating on the moon are affected by its operating parameters, the lunar environment, and the choice of materials is examined. The key transmission line parameters which have an effect on mass, operating temperature, and efficiency are voltage, power loss, and waveform. The choice of waveform for transmission will be influenced by the waveform of the source and load, and therefore an analysis of both DC and AC transmission is necessary for a complete understanding of lunar power transmission. The data presented are for the DC case only; however, the discussion of the environmental effects and of material selection is pertinent to both AC and DC transmission. The operating voltage is shown to be a key parameter in transmission line design. The role efficiency plays in transmission line design is also examined. The analyses include above- and below-the-surface operation for both a vacuum-insulated, two-wire, transmission line, and a solid-dielectric-insulated, coaxial, transmission line.

  16. Incoherent Scatter Plasma Lines: Observations and Applications

    Science.gov (United States)

    Akbari, Hassanali; Bhatt, Asti; La Hoz, Cesar; Semeter, Joshua L.

    2017-10-01

    Space plasmas are host to the electrostatic Langmuir waves and a rich range of processes associated with them. Many of such processes that are of interest in micro-scale plasma physics and magnetosphere-ionosphere physics are open to investigation via incoherent scatter plasma lines—i.e., a pair of resonant peaks in the incoherent scatter radar (ISR) spectrum, symmetrically displaced from the radar transmitting frequency by about the plasma frequency, as the signature of Langmuir waves in the ISR spectrum. There now exists a large body of literature devoted to the investigation of a number of topics in ionospheric physics via plasma line theory and observation. It is the goal of this work to provide a comprehensive review of this literature, from the early theoretical works on oscillations in magnetized plasma to the recent advances in plasma line measurements and applications. This review includes detailed theoretical discussions on the intensity and frequency displacement of plasma lines. It reviews the experimental observations of plasma lines enhanced by various sources of energy and discusses the implications of the observations in the context of ionospheric physics. The review also covers the practical aspects of plasma line measurements, from measurement techniques to the applications of plasma lines in estimating the bulk parameters of the ionosphere.

  17. Moving contact lines on vibrating surfaces

    Science.gov (United States)

    Solomenko, Zlatko; Spelt, Peter; Scott, Julian

    2017-11-01

    Large-scale simulations of flows with moving contact lines for realistic conditions generally requires a subgrid scale model (analyses based on matched asymptotics) to account for the unresolved part of the flow, given the large range of length scales involved near contact lines. Existing models for the interface shape in the contact-line region are primarily for steady flows on homogeneous substrates, with encouraging results in 3D simulations. Introduction of complexities would require further investigation of the contact-line region, however. Here we study flows with moving contact lines on planar substrates subject to vibrations, with applications in controlling wetting/dewetting. The challenge here is to determine the change in interface shape near contact lines due to vibrations. To develop further insight, 2D direct numerical simulations (wherein the flow is resolved down to an imposed slip length) have been performed to enable comparison with asymptotic theory, which is also developed further. Perspectives will also be presented on the final objective of the work, which is to develop a subgrid scale model that can be utilized in large-scale simulations. The authors gratefully acknowledge the ANR for financial support (ANR-15-CE08-0031) and the meso-centre FLMSN for use of computational resources. This work was Granted access to the HPC resources of CINES under the allocation A0012B06893 made by GENCI.

  18. Reducing off-line to on-line: An example and its applications

    Directory of Open Access Journals (Sweden)

    Demange Marc

    2003-01-01

    Full Text Available We study on-line versions of maximum weighted hereditary subgraph problems for which the instance is revealed in two clusters. We focus on the comparison of these on-line problems with their respective off-line versions. In [3], we have reduced on-line versions to the off-line ones in order to devise competitive analysis for such problems. In this paper, we first devise hardness results pointing out that this previous analysis was tight. Then, we propose a process that allows, for a large class of hereditary problems, to transform an on-line algorithm into an off-line one with improvement of the guarantees. This result can be seen as an inverse version of our previous work. It brings to the fore a hardness gap between on-line and off-line versions of those problems. This result does not apply in the case of maximizing a k -colorable induced subgraph of a given graph. For this problem we point out that, contrary to the first case, the on-line version is almost as well approximated as the offline one. .

  19. On-line adaptive line frequency noise cancellation from a nuclear power measuring channel

    Directory of Open Access Journals (Sweden)

    Qadir Javed

    2011-01-01

    Full Text Available On-line software for adaptively canceling 50 Hz line frequency noise has been designed and tested at Pakistan Research Reactor 1. Line frequency noise causes much problem in weak signals acquisition. Sometimes this noise is so dominant that original signal is totally corrupted. Although notch filter can be used for eliminating this noise, but if signal of interest is in close vicinity of 50 Hz, then original signal is also attenuated and hence overall performance is degraded. Adaptive noise removal is a technique which could be employed for removing line frequency without degrading the desired signal. In this paper line frequency noise has been eliminated on-line from a nuclear power measuring channel. The adaptive LMS algorithm has been used to cancel 50 Hz noise. The algorithm has been implemented in labVIEW with NI 6024 data acquisition card. The quality of the acquired signal has been improved much as can be seen in experimental results.

  20. Dissolution of FB-Line Cabinet Sweepings

    Energy Technology Data Exchange (ETDEWEB)

    Crowder, Mark L.

    2005-06-14

    Three FB-Line samples were received by the Savannah River National Laboratory (SRNL) for characterization and evaluation for suitability for HB-Line dissolution. These samples are part of a larger sampling/evaluation program in support of FB-Line deinventory efforts. The samples studied were identified as MC04-147- HBL, MC04-148-HBL, and FBL-SWP-04-016-HBL (N). The first sample, MC04-147-HBL, is a portion of FB-Line Packaging and Stabilization (P&S) materials. The second sample, MC04-148-HBL, is a sweeping from Cabinet 6-8, which is not representative of the mechanical line. The third sample, FBL-SWP-04-016-HBL (N), is an FB-Line North cabinet sweeping. The samples were described by FB-Line personnel as containing plutonium oxide (PuO{sub 2}) which had not been high-fired. This description was generally confirmed by solids analysis and off gas measurements. All three samples were dissolved in 8 M HNO{sub 3}/0.1 M KF at 90-100 C leaving minor amounts of solid residue. During dissolution, sample MC04-147 did not generate hydrogen gas. Sample MC04-148 generated modest amounts of gas, which contained 4.0 to 4.7 volume percent (vol %) hydrogen (H{sub 2}) at a ratio of up to 8.4 x 10{sup -5} mol H{sub 2}/g sample. Sample FBL-SWP-04-016-HBL (N) was nearly completely soluble in 8 M HNO{sub 3}and produced a very small amount of gas. Apparently, the CaF{sub 2} in that sample dissolves and provides sufficient fluoride to support the dissolution of other components.

  1. Underground power line fault locating system

    Energy Technology Data Exchange (ETDEWEB)

    Fox, L.D.; Flath, R.K.

    1993-08-24

    A method is described of locating a fault in a polyphase power distribution system power distributing power from a bulk power source to power consumers, the power distribution system having a substation feeding a fused switch gear unit, a first vault, and at least one subsequent vault receiving power from the first vault, the first vault distributing power from the fused switch gear unit among plural outgoing underground power lines, each underground outgoing power line supplying power to at least one power consumer, the method comprising the steps of: checking fusing within the fused switch gear unit to determine in which phase the fault has occurred; checking the continuity of a power line interconnecting the fused switch gear unit and the first vault; identifying the fused switch gear unit and the first vault which normally supply power to a line having the fault; installing a fault indicator on each underground outgoing power line of the faulted phase in the first vault and in each subsequent vault; inserting a current limiting fuse in series with and between the fused switch gear unit and the first vault; reenergizing the first vault plural outgoing underground power lines through the current limiting fuse and causing the current limiting fuse to blow; and reading each fault indicator after the reenergizing step to determine the location of the fault. A method according to claim 7 for an underground power distribution system wherein at least one underground outgoing power line delivers power to at least one distribution transformer, wherein the step of installing the fault indicators further comprises installing a fault indicator on each distribution transformer.

  2. Primary Students' Success on the Structured Number Line

    Science.gov (United States)

    Diezmann, Carmel M.; Lowrie, Tom; Sugars, Lindy A.

    2010-01-01

    Number lines are part of people's everyday life and are frequently used in primary mathematics as instructional aids, in texts, and for assessment purposes on mathematics tests. There are two types of number lines; (1) structured number lines, which are the focus of this paper; and (2) empty number lines. Structured number lines represent…

  3. First on-line results from the CRIS (Collinear Resonant Ionisation Spectroscopy) beam line at ISOLDE

    Energy Technology Data Exchange (ETDEWEB)

    Procter, T. J., E-mail: thomas.procter@postgrad.manchester.ac.uk; Flanagan, K. T. [University of Manchester (United Kingdom); Collaboration: CRIS Collaboration

    2013-04-15

    The CRIS (Collinear Resonant Ionisation Spectroscopy) experiment at the on-line isotope separator facility, ISOLDE, CERN, has been constructed for high-sensitivity laser spectroscopy measurements on radioactive isotopes. The technique determines the magnetic dipole and electric quadrupole moments, nuclear spin and changes in mean-square charge radii of exotic nuclei via measurement of their hyperfine structures and isotope shifts. In November 2011 the first on-line run was performed using the CRIS beam line, when the hyperfine structure of {sup 207}Fr was successfully measured. This paper will describe the technique and experimental setup of CRIS and present the results from the first on-line experiment.

  4. Broad-line active galactic nuclei rotate faster than narrow-line ones.

    Science.gov (United States)

    Kollatschny, Wolfram; Zetzl, Matthias

    2011-02-17

    The super-massive black holes of 10(6)M(⊙) to 10(9)M(⊙) that reside in the nuclei of active galaxies (AGN) are surrounded by a region emitting broad lines, probably associated with an accretion disk. The diameters of the broad-line regions range from a few light-days to more than a hundred light-days, and cannot be resolved spatially. The relative significance of inflow, outflow, rotational or turbulent motions in the broad-line regions as well as their structure (spherical, thin or thick accretion disk) are unknown despite intensive studies over more than thirty years. Here we report a fundamental relation between the observed emission linewidth full-width at half-maximum (FWHM) and the emission line shape FWHM/σ(line) in AGN spectra. From this relation we infer that the predominant motion in the broad-line regions is Keplerian rotation in combination with turbulence. The geometry of the inner region varies systematically with the rotation velocity: it is flattest for the fast-rotating broad-line objects, whereas slow-rotating narrow-line AGN have a more spherical structure. Superimposed is the trend that the line-emitting region becomes geometrically thicker towards the centre within individual galaxies. Knowing the rotational velocities, we can derive the central black-hole masses more accurately; they are two to ten times smaller than has been estimated previously.

  5. Research for the Influence of Distribution Network Line Reclosing Current on Line Protection

    Directory of Open Access Journals (Sweden)

    Yu Kansheng

    2016-01-01

    Full Text Available According to the distribution network line structure and reclosing control strategy, the system simulation model of distribution network lines has established based on the real-time digital simulation RTDS. Based on this, distribution network switching impulse current characteristic has researched with different capacity, different distribution and different load power factor under the different voltage switching angles. The results of the study provide a scientific basis for distribution network line protection setting, in order to further lay the foundation for improvement the validity and reliability of distribution network line protection action.

  6. Biophysical Profiling of Tumor Cell Lines

    Directory of Open Access Journals (Sweden)

    Frederick Coffman

    2011-01-01

    Full Text Available Despite significant differences in genetic profiles, cancer cells share common phenotypic properties, including membrane-associated changes that facilitate invasion and metastasis. The Corning Epic® optical biosensor was used to monitor dynamic mass rearrangements within and proximal to the cell membrane in tumor cell lines derived from cancers of the colon, bone, cervix, lung and breast. Data was collected in real time and required no exogenously added signaling moiety (signal-free technology. Cell lines displayed unique profiles over the time-courses: the time-courses all displayed initial signal increases to maximal values, but the rate of increase to those maxima and the value of those maxima were distinct for each cell line. The rate of decline following the maxima also differed among cell lines. There were correlations between the signal maxima and the observed metastatic behavior of the cells in xenograft experiments; for most cell types the cells that were more highly metastatic in mice had lower time-course maxima values, however the reverse was seen in breast cancer cells. The unique profiles of these cell lines and the correlation of at least one profile characteristic with metastatic behavior demonstrate the potential utility of biophysical tumor cell profiling in the study of cancer biology.

  7. A biophysical analysis of latitudinal tree line

    Science.gov (United States)

    Goetz, S. J.; Loranty, M. M.; Berner, L.; Jin, Y.; Randerson, J. T.

    2011-12-01

    Northern latitudinal tree line represents the interface between boreal forests and tundra ecosystems, and is the ecophysiological limit of tree recruitment and persistence. The transition between tundra and forest is typically gradual, occurring over tens to hundreds of kilometers. This gradient represents a substantial change in the biophysical properties of the earth surface, one that is particularly important in ecosystems that are snow covered for much of the year. Tree line is, however, commonly delineated by the point of the northern most tree, with no gradient between forested and non-forested ecosystems. As a consequence crisp delineations of tree line incorporated into models introduce error in surface radiation budgets due to inaccurate albedo representations. Errors in modeled carbon and water fluxes are likely as well. Here we use satellite observations to quantify several key biophysical properties across latitudinal tree line for a series of sites throughout the pan-boreal region We find decreases in NDVI and increases in albedo across the transition from boreal forest to tundra, as expected. However, in the absence of topographical barriers we find that these transitions can occur over upwards of 100 km, and that biophysical properties characteristic of tundra ecosystems can occur as far as 100 km south of tree line. This suggests that land surface models likely overestimate surface radiation budgets and carbon fluxes in the boreal biome. We discuss our results in the context of land surface models, noting specific examples from archived model runs.

  8. Analysis of folded pulse forming line operation

    Science.gov (United States)

    Domonkos, M. T.; Watrous, J.; Parker, J. V.; Cavazos, T.; Slenes, K.; Heidger, S.; Brown, D.; Wilson, D.

    2014-09-01

    A compact pulse forming line (CPFL) concept based on a folded transmission line and high-breakdown strength dielectric was explored through an effort combining proof-of-principle experiments with electromagnetic modeling. A small-scale folded CPFL was fabricated using surface-mount ceramic multilayer capacitors. The line consisted of 150 capacitors close-packed in parallel and delivered a 300 ns flat-top pulse. The concept was carried to a 10 kV class device using a polymer-ceramic nanocomposite dielectric with a permittivity of 37.6. The line was designed for a 161 ns FWHM length pulse into a matched load. The line delivered a 110 ns FWHM pulse, and the pulse peak amplitude exceeded the matched load ideal. Transient electromagnetic analysis using the particle-in-cell code ICEPIC was conducted to examine the nature of the unexpected pulse shortening and distortion. Two-dimensional analysis failed to capture the anomalous behavior. Three-dimensional analysis replicated the pulse shape and revealed that the bends were largely responsible for the pulse shortening. The bends not only create the expected reflection of the incident TEM wave but also produce a non-zero component of the Poynting vector perpendicular to the propagation direction of the dominant electromagnetic wave, resulting in power flow largely external to the PFL. This analysis explains both the pulse shortening and the amplitude of the pulse.

  9. Transmission Line Adapted Analytical Power Charts Solution

    Science.gov (United States)

    Sakala, Japhet D.; Daka, James S. J.; Setlhaolo, Ditiro; Malichi, Alec Pulu

    2017-08-01

    The performance of a transmission line has been assessed over the years using power charts. These are graphical representations, drawn to scale, of the equations that describe the performance of transmission lines. Various quantities that describe the performance, such as sending end voltage, sending end power and compensation to give zero voltage regulation, may be deduced from the power charts. Usually required values are read off and then converted using the appropriate scales and known relationships. In this paper, the authors revisit this area of circle diagrams for transmission line performance. The work presented here formulates the mathematical model that analyses the transmission line performance from the power charts relationships and then uses them to calculate the transmission line performance. In this proposed approach, it is not necessary to draw the power charts for the solution. However the power charts may be drawn for the visual presentation. The method is based on applying derived equations and is simple to use since it does not require rigorous derivations.

  10. Optimal Reinsertion of Cancelled Train Lines

    DEFF Research Database (Denmark)

    Groth, Julie Jespersen; Clausen, Jens

    2006-01-01

    One recovery strategy in case of a major disruption in rail network is to cancel all trains on a specific line of the network. When the disturbance has ended, the cancelled line must be reinserted as soon as possible. In this article we present a mixed integer programming (MIP) model for calculat....... The model finds the optimal solution in an average of 0.5 CPU seconds in each test case.......One recovery strategy in case of a major disruption in rail network is to cancel all trains on a specific line of the network. When the disturbance has ended, the cancelled line must be reinserted as soon as possible. In this article we present a mixed integer programming (MIP) model...... for calculating the best way to reinsert cancelled train lines in a rail network covered by a periodic timetable. Using a high abstraction level it has been possible to incorporate the temporal aspect in the model only relying on the information embedded in the train identification numbers of each departure...

  11. Formación on line

    Directory of Open Access Journals (Sweden)

    O. Grau-Perejoan

    Full Text Available La formación on line es una modalidad de enseñanza a distancia basada en las nuevas tecnologías. En este artículo se pretende hacer una introducción a base de describir a grandes rasgos sus características principales: asincronía, no presencialidad, comunicación escrita, función del profesor on line, así como los retos, los riesgos, las ventajas y los inconvenientes que plantea. Se exponen las diferencias entre la formación on line y la formación presencial, de manera que los docentes puedan adaptar de la mejor manera posible sus propuestas formativas a la modalidad on line. Se introduce el importantísimo papel de la planificación y de la fase de diseño y, finalmente, se repasan conceptos útiles para comprender mejor el mundo de la formación on line como son los conceptos entorno virtual de aprendizaje (EVA o Blended Learning (B-Learning.

  12. Transfer line tests take centre stage

    CERN Multimedia

    Katarina Anthony

    2014-01-01

    Last weekend, proton beams came knocking on the LHC's door. Shooting from the SPS and into the two LHC transfer lines, the proton beams were dumped just short of entering the accelerator.   The upper plot shows the trajectory of the first TI2 beam, which reached the end of the transfer line in a single attempt after 18 months of technical stop. Below, a smoother beam trajectory in TI2 after some corrections. For the first time since Run 1, the SPS to LHC transfer lines (TI8 and TI2) transported proton beams just short of the LHC. "We tested the beam instrumentation, the devices that measure the beam intensity, transverse beam profile, position and losses, as well as the beam collimators along the transfer lines," says Reyes Alemany Fernandez, the engineer in charge of the LHC. "We were also able to spot possible bottle necks in the beam trajectory and to perform the first optics measurements." Once the beams arrived at the transfer line beam dumps...

  13. Iron and zinc availability in maize lines

    Directory of Open Access Journals (Sweden)

    Valéria Aparecida Vieira Queiroz

    2011-09-01

    Full Text Available The aim of this study was to characterize the Zn and Fe availability by phytic acid/Zn and phytic acid/Fe molar ratios, in 22 tropical maize inbred lines with different genetic backgrounds. The Zn and Fe levels were determined by atomic absorption spectrophotometry and the P through colorimetry method. Three screening methods for phytic acid (Phy analysis were tested and one, based on the 2,2'-bipyridine reaction, was select. There was significant variability in the contents of zinc (17.5 to 42 mg.kg-1, iron (12.2 to 36.7 mg.kg-1, phosphorus (230 to 400 mg.100 g-1, phytic acid (484 to 1056 mg.100 g-1, phytic acid P (140 to 293 mg.100 g-1 and available-P (43.5 to 199.5 mg.100 g-1, and in the available-P/total-P ratio (0.14 to 0.50, Phy/Zn (18.0 to 43.5 and Phy/Fe (16.3 to 45.5 molar ratios. Lines 560977, 560978 and 560982 had greater availability of Zn and lines 560975, 560977, 561010 and 5610111 showed better Fe availability. Lines 560975, 560977 and 560978 also showed better available-P/total-P ratio. Thus, the lines 560975, 560977 and 560978 were considered to have the potential for the development of cultivars of maize with high availability of Fe and/or Zn.

  14. Dynamic Line Rating: Research and Policy Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Jake P. Gentle; Kurt S. Myers; Michael R. West

    2014-07-01

    Dynamic Line Rating (DLR) is a smart grid technology that allows the rating of electrical conductors to be increased based on local weather conditions. Overhead lines are conventionally given a conservative rating based on worst case scenarios. We demonstrate that observing the conditions in real time leads to additional capacity and safer operation. This paper provides a report of a pioneering scheme in the United States of America in which DLR has been applied. Thereby, we demonstrate that observing the local weather conditions in real time leads to additional capacity and safer operation. Secondly, we discuss limitations involved. In doing so, we arrive at novel insights which will inform and improve future DLR projects. Third, we provide a policy background and discussion to clarify the technology’s potential and identifies barriers to the imminent adoption of dynamic line rating systems. We provide suggestions for regulatory bodies about possible improvements in policy to encourage adoption of this beneficial technology.

  15. Susceptibility of cell lines to avian viruses

    Directory of Open Access Journals (Sweden)

    Simoni Isabela Cristina

    1999-01-01

    Full Text Available The susceptibility of the five cell lines - IB-RS-2, RK-13, Vero, BHK-21, CER - to reovirus S1133 and infectious bursal disease virus (IBDV vaccine GBV-8 strain was studied to better define satisfactory and sensitive cell culture systems. Cultures were compared for presence of CPE, virus titers and detection of viral RNA. CPE and viral RNA were detected in CER and BHK-21 cells after reovirus inoculation and in RK-13 cell line after IBDV inoculation and with high virus titers. Virus replication by production of low virus titers occurred in IB-RS-2 and Vero cells with reovirus and in BHK-21 cell line with IBDV.

  16. Specification of Products and Product Lines

    Directory of Open Access Journals (Sweden)

    Ariel Gonzalez

    2010-01-01

    Full Text Available The study of variability in software development has become increasingly important in recent years. A common mechanism to represent the variability in a product line is by means of feature models. However, the relationship between these models and UML design models is not straightforward. UML statecharts are extended introducing variability in their main components, so that the behavior of product lines can be specified. The contribution of this work is the proposal of a rule-based approach that defines a transformation strategy from extended statecharts to concrete UML statecharts. This is accomplished via the use of feature models, in order to describe the common and variant components, in such a way that, starting from different feature configurations and applying the rule-based method, concrete state machines corresponding to different products of a line can be obtained.

  17. Kinetic Line Voronoi Operations and Their Reversibility

    DEFF Research Database (Denmark)

    Mioc, Darka; Anton, François; Gold, Christopher

    2010-01-01

    mechanisms and dynamic map visualisations. In order to use the reversibility within the kinetic Voronoi diagram of points and open oriented line segments, we need to assure that reversing the map commands will produce exactly the changes in the map equivalent to the previous map states. To prove...... that reversing the map update operations produces the exact reverse changes, we show an isomorphism between the set of complex operations on the kinetic Voronoi diagram of points and open oriented line segments and the sets of numbers of new / deleted Voronoi regions induced by these operations, and its...... explanation using the finite field of residual classes of integers modulo 5: F 5 = ℤ/5ℤ. We show also an isomorphism between the set of complex operations on the kinetic Voronoi diagram of points and open oriented line segments and the set of differences of new and deleted Quad-Edge edges induced...

  18. Line and boundary detection in speckle images.

    Science.gov (United States)

    Czerwinski, R N; Jones, D L; O'Brien, W R

    1998-01-01

    This paper considers the problem of detecting lines in speckle imagery, such as that produced by synthetic aperture radar (SAR) or ultrasound techniques. Using the physical principles that account for the speckle phenomenon, we derive the optimal detector for lines in fully developed speckle, and we compare the optimal detector to several suboptimal detection rules that are more computationally efficient. We show that when the noise is uncorrelated, a very simple suboptimal detection rule is nearly optimal, and that even in colored speckle, a related class of detectors can approach optimal performance. Finally, we also discuss the application of this technique to medical ultrasonic images, where the detection of tissue boundaries is considered as a problem of line detection.

  19. Beam line for Schools: beyond expectations

    CERN Multimedia

    Cian O'Luanaigh

    2014-01-01

    Out of 292 proposals for CERN's first ever "Beam line for Schools" contest, two teams of high-school students – Odysseus' Comrades from Varvakios Pilot School in Athens, Greece and Dominicuscollege from Dominicus College in Nijmegen in the Netherlands – were selected to spend 10 days conducting their proposed experiments at the fully equipped T9 beam line on CERN's Meyrin site. Dedicated CERN staff and users from across the departments have put in a huge effort to ensure the success of the project.   Detector physicist Cenk Yidriz (centre, white helmet) explains the setup of the "Beamline for schools" experiment at the T9 beamline. It's finally beam time. After months of organisation, coding, engineering and even painting the experimental area, the T9 beam line is ready to deliver protons to experiments devised and built by high-school students. “They are here to collect data and experience the l...

  20. Coaxial tube array space transmission line characterization

    Science.gov (United States)

    Switzer, Colleen A.; Bents, David J.

    1987-01-01

    The coaxial tube array tether/transmission line used to connect an SP-100 nuclear power system to the space station was characterized over the range of reactor-to-platform separation distances of 1 to 10 km. Characterization was done with respect to array performance, physical dimensions and masses. Using a fixed design procedure, a family of designs was generated for the same power level (300 kWe), power loss (1.5 percent), and meteoroid survival probability (99.5 percent over 10 yr). To differentiate between vacuum insulated and gas insulated lines, two different maximum values of the E field were considered: 20 kV/cm (appropriate to vacuum insulation) and 50 kV/cm (compressed SF6). Core conductor, tube, bumper, standoff, spacer and bumper support dimensions, and masses were also calculated. The results of the characterization show mainly how transmission line size and mass scale with reactor-to-platform separation distance.

  1. Discrete Line Congruences for Shading and Lighting

    KAUST Repository

    Wang, Jun

    2013-07-01

    Two-parameter families of straight lines (line congruences) are implicitly present in graphics and geometry processing in several important ways including lighting and shape analysis. In this paper we make them accessible to optimization and geometric computing, by introducing a general discrete version of congruences based on piecewise-linear correspondences between triangle meshes. Our applications of congruences are based on the extraction of a so-called torsion-free support structure, which is a procedure analogous to remeshing a surface along its principal curvature lines. A particular application of such structures are freeform shading and lighting systems for architecture. We combine interactive design of such systems with global optimization in order to satisfy geometric constraints. In this way we explore a new area where architecture can greatly benefit from graphics.

  2. Load-resistant coaxial transmission line

    Science.gov (United States)

    Hall, David R.; Fox, Joe

    2006-01-03

    A transmission line for downhole tools that make up all or part of a tool string for drilling and production of oil, gas, and geothermal wells that can withstand the dynamic gravitational forces and other accelerations associated with downhole excavations. The transmission line has a metal tube, or outer conductor, that houses a coaxial wire inner conductor. A non-metallic dielectric material is interposed between the inner and outer conductors. The outer and inner conductors and the dielectric are sufficiently compressed together so that independent motion between them is abated. Compression of the components of the transmission line may be achieved by drawing the transmission through one or more dies in order to draw down the outer conductor onto the dielectric, or by expanding the inner conductor against the dielectric using a mandrel or hydraulic pressure. Non-metallic bead segments may be used in aid of the compression necessary to resist the dynamic forces and accelerations of drilling.

  3. Transients induced by pulses on transmission lines

    Energy Technology Data Exchange (ETDEWEB)

    Canavero, F.G.; Daniele, V.; Graglia, R.D. (Politecnico di Torino, Turin (Italy). Dipt. di Elettronica)

    1989-02-01

    This paper deals with the derivation of analytical expressions for transients in lossless lines loaded by linear non-reactive elements and excited by interfering disturbances. The telegrapher's equation model is adopted and the equivalent circuit of the n-conductor line is shown to the valid for both internal and external sources. Crosstalk is accounted for via the coupled equations of the line while the external interference is represented by a source of electromagnetic waves. Closed-form solutions in the time domain are derived, and therefore no numerical inversion of Laplace transform is required in the solution process. Our results, besides being directly applicable in many practical cases, provide an insight into the electromagnetic mechanisms of the interferences and constitute a valid check for more complex all-numerical simulations.

  4. On the Intermediate Line Region in AGNs

    Directory of Open Access Journals (Sweden)

    Tek P. Adhikari

    2017-09-01

    Full Text Available In this paper we explore the intermediate line region (ILR by using the photoionisation simulations of the gas clouds present at different radial distances from the center, corresponding to the locations from BLR out to NLR in four types of AGNs. We let for the presence of dust whenever conditions allow for dust existence. All spectral shapes are taken from the recent multi-wavelength campaigns. The cloud density decreases with distance as a power law. We found that the slope of the power law density profile does not affect the line emissivity radial profiles of major emission lines: Hβ, He II, Mg II, C III, and O III. When the density of the cloud at the sublimation radius is as high as 1011.5 cm−3, the ILR should clearly be seen in the observations independently of the shape of the illuminating radiation. Moreover, our result is valid for low ionization nuclear emission regions of active galaxies.

  5. Factored Facade Acquisition using Symmetric Line Arrangements

    KAUST Repository

    Ceylan, Duygu

    2012-05-01

    We introduce a novel framework for image-based 3D reconstruction of urban buildings based on symmetry priors. Starting from image-level edges, we generate a sparse and approximate set of consistent 3D lines. These lines are then used to simultaneously detect symmetric line arrangements while refining the estimated 3D model. Operating both on 2D image data and intermediate 3D feature representations, we perform iterative feature consolidation and effective outlier pruning, thus eliminating reconstruction artifacts arising from ambiguous or wrong stereo matches. We exploit non-local coherence of symmetric elements to generate precise model reconstructions, even in the presence of a significant amount of outlier image-edges arising from reflections, shadows, outlier objects, etc. We evaluate our algorithm on several challenging test scenarios, both synthetic and real. Beyond reconstruction, the extracted symmetry patterns are useful towards interactive and intuitive model manipulations.

  6. A cystic fibrosis pancreatic adenocarcinoma cell line.

    Science.gov (United States)

    Schoumacher, R A; Ram, J; Iannuzzi, M C; Bradbury, N A; Wallace, R W; Hon, C T; Kelly, D R; Schmid, S M; Gelder, F B; Rado, T A

    1990-05-01

    We established a pancreatic adenocarcinoma cell line (CFPAC-1) from a patient with cystic fibrosis (CF) and assessed some of its properties. The cells show epithelial morphology and express cytokeratin and oncofetal antigens characteristic of pancreatic duct cells. Basal and stimulated levels of cAMP and cAMP-dependent protein kinase and the biophysical properties of single Cl- channels in CFPAC-1 are similar to those of airway and sweat gland primary cultures and Cl(-)-secreting epithelial cell lines. Anion transport and single Cl- channel activity was stimulated by Ca2+ ionophores but not by forskolin, cAMP analogs, or phosphodiesterase inhibitors. The cells express the CF gene and manifest the most common CF mutation, deletion of three nucleotides resulting in a phenylalanine-508 deletion. These properties have been stable through greater than 80 passages (24 months), suggesting that CFPAC-1 can serve as a continuous cell line that displays the CF defect.

  7. LineCast: line-based distributed coding and transmission for broadcasting satellite images.

    Science.gov (United States)

    Wu, Feng; Peng, Xiulian; Xu, Jizheng

    2014-03-01

    In this paper, we propose a novel coding and transmission scheme, called LineCast, for broadcasting satellite images to a large number of receivers. The proposed LineCast matches perfectly with the line scanning cameras that are widely adopted in orbit satellites to capture high-resolution images. On the sender side, each captured line is immediately compressed by a transform-domain scalar modulo quantization. Without syndrome coding, the transmission power is directly allocated to quantized coefficients by scaling the coefficients according to their distributions. Finally, the scaled coefficients are transmitted over a dense constellation. This line-based distributed scheme features low delay, low memory cost, and low complexity. On the receiver side, our proposed line-based prediction is used to generate side information from previously decoded lines, which fully utilizes the correlation among lines. The quantized coefficients are decoded by the linear least square estimator from the received data. The image line is then reconstructed by the scalar modulo dequantization using the generated side information. Since there is neither syndrome coding nor channel coding, the proposed LineCast can make a large number of receivers reach the qualities matching their channel conditions. Our theoretical analysis shows that the proposed LineCast can achieve Shannon's optimum performance by using a high-dimensional modulo-lattice quantization. Experiments on satellite images demonstrate that it achieves up to 1.9-dB gain over the state-of-the-art 2D broadcasting scheme and a gain of more than 5 dB over JPEG 2000 with forward error correction.

  8. Effects of Chunking and Line Length on Reading Efficiency.

    Science.gov (United States)

    Keenan, Stacey A.

    1984-01-01

    Concludes that both chunking and shorter line lengths have positive effects on reading efficiency but that high line length variability has a stronger negative effect. Suggests that, because chunking increases line length variability, it can interfere with reading. (FL)

  9. 49 CFR 192.179 - Transmission line valves.

    Science.gov (United States)

    2010-10-01

    ... atmosphere without hazard and, if the transmission line is adjacent to an overhead electric line, so that the gas is directed away from the electrical conductors. (d) Offshore segments of transmission lines must...

  10. Veterans Crisis Line: Videos About Reaching out for Help

    Medline Plus

    Full Text Available ... About About the Veterans Crisis Line FAQs Veteran Suicide Spread the Word Videos Homeless Resources Additional Information ... About About the Veterans Crisis Line FAQs Veteran Suicide The Veterans Crisis Line text-messaging service does ...

  11. Straight line closure of congenital macrostomia

    Directory of Open Access Journals (Sweden)

    Schwarz Richard

    2004-01-01

    Full Text Available The results of patients operated on by Nepal Cleft Lip and Palate Association (NECLAPA surgeons for congenital macrostomia were prospectively studied between January 2000 and December 2002. There were four males and three females with a median age of 10 years. Three had an associated branchial arch syndrome. In all patients an overlapping repair of orbicularis oris was done. Six patients had a straight line closure with excellent cosmetic results and one a Z-plasty with a more obvious scar. All had a normal appearing commissure. Overlapping orbicularis repair with straight line skin closure for this rare congenital anomaly is recommended.

  12. AA, sandwich line with magnetic horn

    CERN Multimedia

    CERN PhotoLab

    1980-01-01

    The magnetic horn, focusing the antiprotons emanating from the target, was affixed to a sandwich line through which the 150 kA pulses were supplied. Expecting to have to change from time to time the fragile horn (inner conductor only 0.7 mm thick), the assembly was designed for quick exchange. At the lower end of the sandwich line we see the connectors for the high-current cables, at the upper end the magnet horn. It has just been lifted from the V-supports which held it aligned downstream of the target. Continue with 8010293.

  13. Linux command line and shell scripting bible

    CERN Document Server

    Blum, Richard

    2014-01-01

    Talk directly to your system for a faster workflow with automation capability Linux Command Line and Shell Scripting Bible is your essential Linux guide. With detailed instruction and abundant examples, this book teaches you how to bypass the graphical interface and communicate directly with your computer, saving time and expanding capability. This third edition incorporates thirty pages of new functional examples that are fully updated to align with the latest Linux features. Beginning with command line fundamentals, the book moves into shell scripting and shows you the practical application

  14. Lineær programmering med Excel

    DEFF Research Database (Denmark)

    Lynggaard, Peter

    Publikationen giver en introduktion til faget "Lineær programmering". Formulering og løsning bygger på, at modellerne opstilles og løses i et Excel-regneark. Fremgangsmåden er forklaret trin for trin, således at hæftet kan bruges som selvstudiemateriale. Indholdsfortegnelse Generelt om styring og...... planlægning Lineær programmering Excel solveren Fortolkning af udskrifter Degeneration Excel tips Opgaver med løsninger...

  15. Laser wire emittance measurement line AT CLIC

    CERN Document Server

    Garcia, H; Blair, G A; Aumeyr, T; Schulte, D; Stulle, F

    2011-01-01

    A precise measurement of the transverse beam size and beam emittances upstream of the final focus is essential for ensuring the full luminosity at future linear colliders. A scheme for the emittance measurements at the RTML line of the CLIC using laser-wire beam profile monitors is described. A lattice of the measurement line is discussed and results of simulations of statistical errors and of their impact on the accuracy of the emittance reconstruction are given. Laser wire systems suitable for CLIC and their main characteristics are discussed.

  16. On line routing per mobile phone

    DEFF Research Database (Denmark)

    Bieding, Thomas; Görtz, Simon; Klose, Andreas

    2009-01-01

    . Additionally it is of utmost importance that the employed communication system is suitable integrated with the firm’s enterprise application system and business processes. On basis of a case study, we describe in this paper a system that is cheap and easy to implement due to the use of simple mobile phones......On-line routing is concerned with building vehicle routes in an ongoing fashion in such a way that customer requests arriving dynamically in time are efficiently and effectively served. An indispensable prerequisite for applying on-line routing methods is mobile communication technology...

  17. Fire Resistant Panels for the Tunnel Linings

    Directory of Open Access Journals (Sweden)

    Gravit Marina

    2016-01-01

    Full Text Available Presents the results of studies of innovative materials in the field of experimental and theoretical research fire resistance fireproof panels Pyro-Safe Aestuver T. Owing to the assembly simplicity, materials cheapness, high ecological standard, recycling, reuse potential, are benefit. Research work is running to improve the knowledge about fireproof panels Pyro-Safe Aestuver T for tunnel lining, its basic performance, its long term behavior and in particular also its fire proof for example when used for the lining of road tunnels.

  18. An intersection graph of straight lines

    DEFF Research Database (Denmark)

    Thomassen, Carsten

    2002-01-01

    G. Ehrlich, S. Even, and R.E. Tarjan conjectured that the graph obtained from a complete 3 partite graph K4,4,4 by deleting the edges of four disjoint triangles is not the intersection graph of straight line segments in the plane. We show that it is.......G. Ehrlich, S. Even, and R.E. Tarjan conjectured that the graph obtained from a complete 3 partite graph K4,4,4 by deleting the edges of four disjoint triangles is not the intersection graph of straight line segments in the plane. We show that it is....

  19. How to motivate assembly line workers

    OpenAIRE

    Saitovic, Maja; Jusufi, Valdete

    2007-01-01

    The purpose of our master thesis was to investigate what motivates assembly line workers performing low-skill jobs in a small industrial laundry business. We wanted to see what fac-tors determine and influence their motivation to work and if and how this motivation can be improved with respect to assembly line systems in general. The method of our investiga-tion was qualitative in nature, where we studied one firm that leases clean bed clothes and textiles to hotels and restaurants around Swe...

  20. Performance of the first ANTARES detector line

    Energy Technology Data Exchange (ETDEWEB)

    Bruijn, R.; Kooijman, P.; Lim, G.; De Wolf, E. [Univ Amsterdam, Inst Hoge Energiefys, NL-1098 XG Amsterdam, (Netherlands); Ageron, M.; Aubert, J.J.; Bertin, V.; Brunner, J.; Busto, J.; Carr, J.; Coyle, P.; Dornic, D.; Escoffier, S.; Hallewell, G.; Lambard, G.; Lavalle, J.; Lelaizant, G.; Louis, F.; Melissas, M.; Payre, P.; Reed, C. [CPPM, CNRS, IN2P3, F-13288 Marseille 9, (France); Ageron, M.; Aubert, J.J.; Bertin, V.; Brunner, J.; Busto, J.; Carr, J.; Coyle, P.; Dornic, D.; Escoffier, S.; Hallewell, G.; Lambard, G.; Lavalle, J.; Lelaizant, G.; Louis, F.; Melissas, M.; Payre, P.; Reed, C. [Univ Aix Marseille 2, F-13288 Marseille 9, (France); Aguilar, J.A.; Bigongiari, C.; Hernandez-Rey, J.J.; Salesa, F.; Toscano, S.; Zornoza, J.D.; Zuniga, J. [Univ Valencia, CSIC, IFIC Inst Fis Corpuscular, Edificios Invest Paterna, Valencia 46071, (Spain); Albert, A.; Castel, D.; Drouhin, D.; Ernenwein, J.P.; Guillard, G. [Univ Houte Alsace, GRPHE, F-68093 Mulhouse, (France); Anton, G.; Auer, R.; Eberl, T.; Fehr, F.; Graf, K.; Hossl, J.; Kalekin, O.; Kappes, A.; Katz, U.; Kopper, C.; Kretschmer, W.; Kuch, S.; Lahmann, R.; Laschinsky, H.; Loucatos, S.; Motz, H.; Naumann, C.; Ostasch, R.; Richardt, C.; Schoeck, F.; Shanidze, R. [Univ Erlangen Nurnberg, Inst Phys, D-91058 Erlangen, (Germany); Anvar, S.; Druillole, F.; Lamare, P.; Le Provost, H. [CEA Saclay, Direct Sci Mat, Inst Rech Fondamentales Univers, Serv Elect Detecteurs et Informat, F-91191 Gif Sur Yvette, (France)

    2009-07-01

    In this paper we report on the data recorded with the first Antares detector line. The line was deployed on 14 February 2006 and was connected to the readout 2 weeks later. Environmental data for one and a half years of running are shown. Measurements of atmospheric muons from data taken from selected runs during the first 6 months of operation are presented. Performance figures in terms of time residuals and angular resolution are given. Finally the angular distribution of atmospheric muons is presented and from this the depth profile of the muon intensity is derived. (authors)