WorldWideScience

Sample records for submitting electronic lot

  1. 27 CFR 73.31 - May I submit forms electronically to TTB?

    Science.gov (United States)

    2010-04-01

    ... TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Filing of Documents with TTB § 73.31 May I submit forms electronically to TTB? Yes; you may submit an electronic form, instead of a paper form, to satisfy any reporting...

  2. 27 CFR 73.32 - May I electronically sign forms I submit electronically to TTB?

    Science.gov (United States)

    2010-04-01

    ... AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Filing of Documents with TTB § 73.32 May I electronically sign forms I submit electronically to TTB? You may electronically sign the electronic form you...

  3. 27 CFR 73.34 - When is an electronically submitted form considered timely filed?

    Science.gov (United States)

    2010-04-01

    ... AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Filing of Documents with TTB § 73.34 When is an electronically submitted form considered timely filed? If you submit a form to our electronic...

  4. Study of Different Priming Treatments on Germination Traits of Soybean Seed Lots

    Directory of Open Access Journals (Sweden)

    Hossein Reza ROUHI

    2011-03-01

    Full Text Available Oilseeds are more susceptible to deterioration due to membrane disruption, high free fatty acid level in seeds and free radical production. These factors are tended to less vigorous seed. Priming treatments have been used to accelerate the germination and seedling growth in most of the crops under normal and stress conditions. For susceptible and low vigor soybean seed, this technique would be a promising method. At first, in separate experiment, effects of hydropriming for (12, 24, 36 and 48 h with control (none prime were evaluated on germination traits of soybean seed lots cv. �Sari� (include 2 drying method and 3 harvest moisture. Then, next experiment was conducted to determination the best combination of osmopriming in soybean seed lots, hence 3 osmotic potential level (-8, -10 and -12 bar at 4 time (12, 24, 36 and 48 h were compared. Analysis of variance showed that, except for seedling dry weight, the other traits include standard germination, germination rate, seedling length and vigor index were influenced by osmopriming. Hydropriming had no effect on these traits and decreased rate of germination. Finally the best combination of osmopriming were osmotic potential -12 bar at 12 hours for time, that submitted acceptable result in all conditions and recommended for soybean seed lots cv. �Sari�.

  5. Study of Different Priming Treatments on Germination Traits of Soybean Seed Lots

    Directory of Open Access Journals (Sweden)

    Hossein Reza ROUHI

    2011-03-01

    Full Text Available Oilseeds are more susceptible to deterioration due to membrane disruption, high free fatty acid level in seeds and free radical production. These factors are tended to less vigorous seed. Priming treatments have been used to accelerate the germination and seedling growth in most of the crops under normal and stress conditions. For susceptible and low vigor soybean seed, this technique would be a promising method. At first, in separate experiment, effects of hydropriming for (12, 24, 36 and 48 h with control (none prime were evaluated on germination traits of soybean seed lots cv. Sari (include 2 drying method and 3 harvest moisture. Then, next experiment was conducted to determination the best combination of osmopriming in soybean seed lots, hence 3 osmotic potential level (-8, -10 and -12 bar at 4 time (12, 24, 36 and 48 h were compared. Analysis of variance showed that, except for seedling dry weight, the other traits include standard germination, germination rate, seedling length and vigor index were influenced by osmopriming. Hydropriming had no effect on these traits and decreased rate of germination. Finally the best combination of osmopriming were osmotic potential -12 bar at 12 hours for time, that submitted acceptable result in all conditions and recommended for soybean seed lots cv. Sari.

  6. How to Submit a Risk Management Plan (RMP) to EPA

    Science.gov (United States)

    RMP*eSubmit software is the only way to submit RMPs. After you have prepared your plan using RMP*eSubmit, you may also re-submit, correct, or withdraw an RMP. Another electronic tool, RMP*Comp, performs the required off-site consequence analysis.

  7. 21 CFR 803.13 - Do I need to submit reports in English?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Do I need to submit reports in English? 803.13... in English? (a) Yes. You must submit all written or electronic equivalent reports required by this part in English. (b) If you submit any reports required by this part in an electronic medium, that...

  8. Exploring lot-to-lot variation in spoilage bacterial communities on commercial modified atmosphere packaged beef.

    Science.gov (United States)

    Säde, Elina; Penttinen, Katri; Björkroth, Johanna; Hultman, Jenni

    2017-04-01

    Understanding the factors influencing meat bacterial communities is important as these communities are largely responsible for meat spoilage. The composition and structure of a bacterial community on a high-O 2 modified-atmosphere packaged beef product were examined after packaging, on the use-by date and two days after, to determine whether the communities at each stage were similar to those in samples taken from different production lots. Furthermore, we examined whether the taxa associated with product spoilage were distributed across production lots. Results from 16S rRNA amplicon sequencing showed that while the early samples harbored distinct bacterial communities, after 8-12 days storage at 6 °C the communities were similar to those in samples from different lots, comprising mainly of common meat spoilage bacteria Carnobacterium spp., Brochothrix spp., Leuconostoc spp. and Lactococcus spp. Interestingly, abundant operational taxonomic units associated with product spoilage were shared between the production lots, suggesting that the bacteria enable to spoil the product were constant contaminants in the production chain. A characteristic succession pattern and the distribution of common spoilage bacteria between lots suggest that both the packaging type and the initial community structure influenced the development of the spoilage bacterial community. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. Lot No. 1 of Frit 202 for DWPF cold runs

    International Nuclear Information System (INIS)

    Schumacher, R.F.

    1993-01-01

    This report was prepared at the end of 1992 and summarizes the evaluation of the first lot sample of DWPF Frit 202 from Cataphote Inc. Publication of this report was delayed until the results from the carbon analyses could be included. To avoid confusion the frit specifications presented in this report were those available at the end of 1992. The specifications were slightly modified early in 1993. The frit was received and evaluated for moisture, particle size distribution, organic-inorganic carbon and chemical composition. Moisture content and particle size distribution were determined on a representative sample at SRTC. These properties were within the DWPF specifications for Frit 202. A representative sample was submitted to Corning Engineering Laboratory Services for chemical analyses. The sample was split and two dissolutions prepared. Each dissolution was analyzed on two separate days. The results indicate that there is a high probability (>95%) that the silica content of this frit is below the specification limit of 77.0 ± 1.0 wt %. The average of the four analyzed values was 75.1 wt % with a standard deviation of 0.28 wt %. All other oxides were within the elliptical two sigma limits. Control standard frit samples were submitted and analyzed at the same time and the results were very similar to previous analyses of these materials

  10. 30 CFR 210.104 - Must I submit these production reports electronically?

    Science.gov (United States)

    2010-07-01

    ... MINERALS REVENUE MANAGEMENT FORMS AND REPORTS Production Reports-Oil and Gas § 210.104 Must I submit these... Production Reporter Handbook for the most current reporting options, instructions, and security measures. The... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Must I submit these production reports...

  11. 1D numerical simulation of charge trapping in an insulator submitted to an electron beam irradiation. Part I: Computation of the initial secondary electron emission yield

    International Nuclear Information System (INIS)

    Aoufi, A.; Damamme, G.

    2011-01-01

    The aim of this work is to study by numerical simulation a mathematical modelling technique describing charge trapping during initial charge injection in an insulator submitted to electron beam irradiation. A two-fluxes method described by a set of two stationary transport equations is used to split the electron current j e (z) into coupled forward j e+ (z) and backward j e (z) currents and such that j e (z) = j e+ (z) - j e- (z). The sparse algebraic linear system, resulting from the vertex-centered finite-volume discretization scheme is solved by an iterative decoupled fixed point method which involves the direct inversion of a bi-diagonal matrix. The sensitivity of the initial secondary electron emission yield with respect to the energy of incident primary electrons beam, that is penetration depth of the incident beam, or electron cross sections (absorption and diffusion) is investigated by numerical simulations. (authors)

  12. 30 CFR 285.607 - How do I submit my SAP?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I submit my SAP? 285.607 Section 285.607... Assessment Plan and Information Requirements for Commercial Leases § 285.607 How do I submit my SAP? You must submit one paper copy and one electronic version of your SAP to MMS at the address listed in § 285.110(a). ...

  13. 7 CFR 983.52 - Failed lots/rework procedure.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Failed lots/rework procedure. 983.52 Section 983.52..., ARIZONA, AND NEW MEXICO Regulations § 983.52 Failed lots/rework procedure. (a) Substandard pistachios... committee may establish, with the Secretary's approval, appropriate rework procedures. (b) Failed lot...

  14. 7 CFR 46.20 - Lot numbers.

    Science.gov (United States)

    2010-01-01

    ... and entered on all sales tickets identifying and segregating the sales from the various shipments on hand. The lot number shall be entered on the sales tickets by the salesmen at the time of sale or by the produce dispatcher, and not by bookkeepers or others after the sales have been made. No lot number...

  15. 33 CFR 160.210 - Methods for submitting an NOA.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Methods for submitting an NOA... Conditions, and Certain Dangerous Cargos § 160.210 Methods for submitting an NOA. (a) Submission to the... the NVMC web site at http://www.nvmc.uscg.gov; (ii) Electronic submission of Extensible Markup...

  16. Assumptions of acceptance sampling and the implications for lot contamination: Escherichia coli O157 in lots of Australian manufacturing beef.

    Science.gov (United States)

    Kiermeier, Andreas; Mellor, Glen; Barlow, Robert; Jenson, Ian

    2011-04-01

    The aims of this work were to determine the distribution and concentration of Escherichia coli O157 in lots of beef destined for grinding (manufacturing beef) that failed to meet Australian requirements for export, to use these data to better understand the performance of sampling plans based on the binomial distribution, and to consider alternative approaches for evaluating sampling plans. For each of five lots from which E. coli O157 had been detected, 900 samples from the external carcass surface were tested. E. coli O157 was not detected in three lots, whereas in two lots E. coli O157 was detected in 2 and 74 samples. For lots in which E. coli O157 was not detected in the present study, the E. coli O157 level was estimated to be contaminated carton, the total number of E. coli O157 cells was estimated to be 813. In the two lots in which E. coli O157 was detected, the pathogen was detected in 1 of 12 and 2 of 12 cartons. The use of acceptance sampling plans based on a binomial distribution can provide a falsely optimistic view of the value of sampling as a control measure when applied to assessment of E. coli O157 contamination in manufacturing beef. Alternative approaches to understanding sampling plans, which do not assume homogeneous contamination throughout the lot, appear more realistic. These results indicate that despite the application of stringent sampling plans, sampling and testing approaches are inefficient for controlling microbiological quality.

  17. Green Lot-Sizing

    NARCIS (Netherlands)

    M. Retel Helmrich (Mathijn Jan)

    2013-01-01

    textabstractThe lot-sizing problem concerns a manufacturer that needs to solve a production planning problem. The producer must decide at which points in time to set up a production process, and when he/she does, how much to produce. There is a trade-off between inventory costs and costs associated

  18. Reactionary responses to the Bad Lot Objection.

    Science.gov (United States)

    Dellsén, Finnur

    2017-02-01

    As it is standardly conceived, Inference to the Best Explanation (IBE) is a form of ampliative inference in which one infers a hypothesis because it provides a better potential explanation of one's evidence than any other available, competing explanatory hypothesis. Bas van Fraassen famously objected to IBE thus formulated that we may have no reason to think that any of the available, competing explanatory hypotheses are true. While revisionary responses to the Bad Lot Objection concede that IBE needs to be reformulated in light of this problem, reactionary responses argue that the Bad Lot Objection is fallacious, incoherent, or misguided. This paper shows that the most influential reactionary responses to the Bad Lot Objection do nothing to undermine the original objection. This strongly suggests that proponents of IBE should focus their efforts on revisionary responses, i.e. on finding a more sophisticated characterization of IBE for which the Bad Lot Objection loses its bite. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Balancing Urban Biodiversity Needs and Resident Preferences for Vacant Lot Management

    Directory of Open Access Journals (Sweden)

    Christine C. Rega-Brodsky

    2018-05-01

    Full Text Available Urban vacant lots are often a contentious feature in cities, seen as overgrown, messy eyesores that plague neighborhoods. We propose a shift in this perception to locations of urban potential, because vacant lots may serve as informal greenspaces that maximize urban biodiversity while satisfying residents’ preferences for their design and use. Our goal was to assess what kind of vacant lots are ecologically valuable by assessing their biotic contents and residents’ preferences within a variety of settings. We surveyed 150 vacant lots throughout Baltimore, Maryland for their plant and bird communities, classified the lot’s setting within the urban matrix, and surveyed residents. Remnant vacant lots had greater vegetative structure and bird species richness as compared to other lot origins, while vacant lot settings had limited effects on their contents. Residents preferred well-maintained lots with more trees and less artificial cover, support of which may increase local biodiversity in vacant lots. Collectively, we propose that vacant lots with a mixture of remnant and planted vegetation can act as sustainable urban greenspaces with the potential for some locations to enhance urban tree cover and bird habitat, while balancing the needs and preferences of city residents.

  20. Evaluation of toxicity reduction of sodium dodecyl sulfate submitted to electron beam radiation

    Science.gov (United States)

    Romanelli, M. F.; Moraes, M. C. F.; Villavicencio, A. L. C. H.; Borrely, S. I.

    2004-09-01

    Surfactants, as detergent active substances, are an important source of pollution causing biological adverse effects to aquatic organisms. Several data have been showing ecological disturbance due to the high concentration of surfactants on receiving waters and on wastewater treatment plants. Ionizing radiation has been proved as an effective technology to decompose organic substances and few papers have included ecotoxicological aspects. This paper shows the reduction of acute toxicity of a specific surfactant, sodium dodecyl sulfate (SDS), when diluted in distilled water and submitted to electron beam radiation. The study included two test-organisms, the marine bacteria Vibrio fischeri and the crustacean Daphnia similis. Radiation processing resulted in an important acute toxicity removal for both assays, which can be summarized between 70% and 96%, using 3.0, 6.0, 9.0 and 12.0 kGy as radiation doses. Nevertheless, lower doses demonstrated better effect than 9.0 and 12.0 kGy and the bacterium assay was more sensitive to SDS than crustacean assay.

  1. 7 CFR 989.104 - Lot.

    Science.gov (United States)

    2010-01-01

    ... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE RAISINS PRODUCED FROM GRAPES GROWN IN... inspection after reconditioning (such as sorting or drying) and whose original lot identity is no longer...

  2. 7 CFR 33.7 - Less than carload lot.

    Science.gov (United States)

    2010-01-01

    ... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... ISSUED UNDER AUTHORITY OF THE EXPORT APPLE ACT Definitions § 33.7 Less than carload lot. Less than carload lot means a quantity of apples in packages not exceeding 20,000 pounds gross weight or 400...

  3. Cellular Manufacturing System with Dynamic Lot Size Material Handling

    Science.gov (United States)

    Khannan, M. S. A.; Maruf, A.; Wangsaputra, R.; Sutrisno, S.; Wibawa, T.

    2016-02-01

    Material Handling take as important role in Cellular Manufacturing System (CMS) design. In several study at CMS design material handling was assumed per pieces or with constant lot size. In real industrial practice, lot size may change during rolling period to cope with demand changes. This study develops CMS Model with Dynamic Lot Size Material Handling. Integer Linear Programming is used to solve the problem. Objective function of this model is minimizing total expected cost consisting machinery depreciation cost, operating costs, inter-cell material handling cost, intra-cell material handling cost, machine relocation costs, setup costs, and production planning cost. This model determines optimum cell formation and optimum lot size. Numerical examples are elaborated in the paper to ilustrate the characterictic of the model.

  4. Electronic Submissions of Pesticide Applications

    Science.gov (United States)

    Applications for pesticide registration can be submitted electronically, including forms, studies, and draft product labeling. Applicants need not submit multiple electronic copies of any pieces of their applications.

  5. PENENTUAN PRODUCTION LOT SIZES DAN TRANSFER BATCH SIZES DENGAN PENDEKATAN MULTISTAGE

    Directory of Open Access Journals (Sweden)

    Purnawan Adi W

    2012-02-01

    Full Text Available Pengendalian dan perawatan inventori merupakan suatu permasalahan yang sering dihadapi seluruh organisasi dalam berbagai sektor ekonomi. Salah satu tantangan yang yang harus dihadapi dalam pengendalian inventori adalah bagaimana menentukan ukuran lot yang optimal pada suatu sistem produksi dengan berbagai tipe. Analisis batch produksi (production lot dengan pendekatan hybrid simulasi analitik merupakan salah satu penelitian mengenai ukuran lot optimal. Penelitian tersebut menggunakan pendekatan sistem singlestage dimana tidak adanya hubungan antar proses di setiap stage atau dengan kata lain, proses yang satu independen terhadap proses yang lain. Dengan menggunakan objek penelitian yang sama dengan objek penelitian diatas, penelitian ini kemudian mengangkat permasalahan penentuan ukuran production lot dengan pendekatan multistage. Pertama, dengan menggunakan data-data yang sama dengan penelitian sebelumnya ditentukan ukuran production lot yang optimal dengan metode programa linier. Selanjutnya ukuran production lot digunakan sebegai input simulasi untuk menentukan ukuran transfer batch. Rata-rata panjang antrian dan waktu tunggu menjadi ukuran performansi yang digunakan sebagai acuan penentuan ukuran transfer batch dari beberapa alternatif ukuran yang ada. Pada penelitian ini, ukuran production lot yang dihasilkan sama besarnya dengan demand tiap periode. Sedangkan untuk ukuran transfer batch, hasil penentuan dengan menggunakan simulasi kemudian dimplementasikan ke dalam model. Hasilnya adalah adanya penurunan inventori yang terjadi sebesar 76,35% untuk produk connector dan 50,59% untuk produk box connector dari inventori yang dihasilkan dengan pendekatan singlestage. Kata kunci : multistage, production lot, transfer batch     Abstract   Inventory maintenance and inventory control is a problem that often faced by all organization in many economic sectors. One of challenges that must be faced in inventory control is how to determine the

  6. 7 CFR 983.152 - Failed lots/rework procedure.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Failed lots/rework procedure. 983.152 Section 983.152..., ARIZONA, AND NEW MEXICO Rules and Regulations § 983.152 Failed lots/rework procedure. (a) Inshell rework procedure for aflatoxin. If inshell rework is selected as a remedy to meet the aflatoxin regulations of this...

  7. Resenha de: Recueil des travaux historiques de Ferdinand Lot

    Directory of Open Access Journals (Sweden)

    Eurípedes Simões de Paula

    1968-03-01

    Full Text Available RECUEIL DES TRAVAUX HISTORIQUES DE FERDINAND LOT. Tome premier. Coleção "Hautes Études Médievales et Modernes". Centre de Recherches d'Histoire et de Philologie de la IVe Section de l'École Pratique des Hautes Études. Prefácio de Ch. Samaran e biografia por I. Vildé-Lot e M. Mahn-Lot. Publicado com o concurso do Centre National de la Recherche Scientifique. Genebra, Librairie Droz e Paris, Librairie Minard. In-89, XVIII -I- 780 pp

  8. Competition under capacitated dynamic lot-sizing with capacity acquisition

    DEFF Research Database (Denmark)

    Li, Hongyan; Meissner, Joern

    2011-01-01

    Lot-sizing and capacity planning are important supply chain decisions, and competition and cooperation affect the performance of these decisions. In this paper, we look into the dynamic lot-sizing and resource competition problem of an industry consisting of multiple firms. A capacity competition...... production setup, along with inventory carrying costs. The individual production lots of each firm are limited by a constant capacity restriction, which is purchased up front for the planning horizon. The capacity can be purchased from a spot market, and the capacity acquisition cost fluctuates...

  9. 40 CFR 52.128 - Rule for unpaved parking lots, unpaved roads and vacant lots.

    Science.gov (United States)

    2010-07-01

    ... six (6) percent for unpaved road surfaces or eight (8) percent for unpaved parking lot surfaces as... calculating percent cover.) (iii) Vegetative Density Factor. Cut a single, representative piece of vegetation... that are not covered by any piece of the vegetation. To calculate percent vegetative density, use...

  10. Tactical Production and Lot Size Planning with Lifetime Constraints

    DEFF Research Database (Denmark)

    Raiconi, Andrea; Pahl, Julia; Gentili, Monica

    2017-01-01

    In this work, we face a variant of the capacitated lot sizing problem. This is a classical problem addressing the issue of aggregating lot sizes for a finite number of discrete periodic demands that need to be satisfied, thus setting up production resources and eventually creating inventories...

  11. Evaluation of Radon Pollution in Underground Parking Lots by Discomfort Index

    Directory of Open Access Journals (Sweden)

    AH Bu-Olayan

    2016-06-01

    Full Text Available Introduction Recent studies of public underground parking lots showed the influence of radon concentration and the probable discomfort caused by parking cars. Materials and Methods Radon concentration was measured in semi-closed public parking lots in the six governorates of Kuwait, using Durridge RAD7radon detector (USA. Results The peak radon concentration in the parking lots of Kuwait governorates was relatively higher during winter (63.15Bq/m3 compared to summer (41.73 Bq/m3. Radon in the evaluated parking lots revealed a mean annual absorbed dose (DRn: 0.02mSv/y and annual effective dose (HE: 0.06mSv/y.  Conclusion This study validated the influence of relative humidity and temperature as the major components of discomfort index (DI. The mean annual absorbed and effective dose  of radon in the evaluated parking lots were found below the permissible limits. However, high radon DRn and HE were reported when the assessment included the parking lots, the surrounding residential apartments, and office premises. Furthermore, the time-series analysis indicated significant variations of the seasonal and site-wise distribution of radon concentrations in the indoor evaluated parking lots of the six Kuwait governorates

  12. Neuro-ophthalmology of late-onset Tay-Sachs disease (LOTS).

    Science.gov (United States)

    Rucker, J C; Shapiro, B E; Han, Y H; Kumar, A N; Garbutt, S; Keller, E L; Leigh, R J

    2004-11-23

    Late-onset Tay-Sachs disease (LOTS) is an adult-onset, autosomal recessive, progressive variant of GM2 gangliosidosis, characterized by involvement of the cerebellum and anterior horn cells. To determine the range of visual and ocular motor abnormalities in LOTS, as a prelude to evaluating the effectiveness of novel therapies. Fourteen patients with biochemically confirmed LOTS (8 men; age range 24 to 53 years; disease duration 5 to 30 years) and 10 age-matched control subjects were studied. Snellen visual acuity, contrast sensitivity, color vision, stereopsis, and visual fields were measured, and optic fundi were photographed. Horizontal and vertical eye movements (search coil) were recorded, and saccades, pursuit, vestibulo-ocular reflex (VOR), vergence, and optokinetic (OK) responses were measured. All patients showed normal visual functions and optic fundi. The main eye movement abnormality concerned saccades, which were "multistep," consisting of a series of small saccades and larger movements that showed transient decelerations. Larger saccades ended earlier and more abruptly (greater peak deceleration) in LOTS patients than in control subjects; these changes can be attributed to premature termination of the saccadic pulse. Smooth-pursuit and slow-phase OK gains were reduced, but VOR, vergence, and gaze holding were normal. Patients with late-onset Tay-Sachs disease (LOTS) show characteristic abnormalities of saccades but normal afferent visual systems. Hypometria, transient decelerations, and premature termination of saccades suggest disruption of a "latch circuit" that normally inhibits pontine omnipause neurons, permitting burst neurons to discharge until the eye movement is completed. These measurable abnormalities of saccades provide a means to evaluate the effects of novel treatments for LOTS.

  13. Metal concentrations from permeable pavement parking lot in Edison, NJ

    Data.gov (United States)

    U.S. Environmental Protection Agency — The U.S. Environmental Protection Agency constructed a 4000-m2 parking lot in Edison, New Jersey in 2009. The parking lot is surfaced with three permeable pavements...

  14. Can “Cleaned and Greened” Lots Take on the Role of Public Greenspace?

    Science.gov (United States)

    Megan Heckert; Michelle Kondo

    2018-01-01

    Cities are increasingly greening vacant lots to reduce blight. Such programs could reduce inequities in urban greenspace access, but whether and how greened lots are used remains unclear. We surveyed three hundred greened lots in Philadelphia for signs of use and compared characteristics of used and nonused lots. We found physical signs of use that might be found in...

  15. 9 CFR 381.191 - Distribution of inspected products to small lot buyers.

    Science.gov (United States)

    2010-01-01

    ... small lot buyers. 381.191 Section 381.191 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE...; Exportation; or Sale of Poultry or Poultry Products § 381.191 Distribution of inspected products to small lot... small lot buyers (such as small restaurants), distributors or jobbers may remove inspected and passed...

  16. MODEL JOINT ECONOMIC LOT SIZE PADA KASUS PEMASOK-PEMBELI DENGAN PERMINTAAN PROBABILISTIK

    Directory of Open Access Journals (Sweden)

    Wakhid Ahmad Jauhari

    2009-01-01

    Full Text Available In this paper we consider single vendor single buyer integrated inventory model with probabilistic demand and equal delivery lot size. The model contributes to the current literature by relaxing the deterministic demand assumption which has been used for almost all integrated inventory models. The objective is to minimize expected total costs incurred by the vendor and the buyer. We develop effective iterative procedures for finding the optimal solution. Numerical examples are used to illustrate the benefit of integration. A sensitivity analysis is performed to explore the effect of key parameters on delivery lot size, safety factor, production lot size factor and the expected total cost. The results of the numerical examples indicate that our models can achieve a significant amount of savings. Finally, we compare the results of our proposed model with a simulation model. Abstract in Bahasa Indonesia: Pada penelitian ini akan dikembangkan model gabungan pemasok-pembeli dengan permintaan probabilistik dan ukuran pengiriman sama. Pada model setiap lot pemesanan akan dikirim dalam beberapa lot pengiriman dan pemasok akan memproduksi barang dalam ukuran batch produksi yang merupakan kelipatan integer dari lot pengiriman. Dikembangkan pula suatu algoritma untuk menyelesaikan model matematis yang telah dibuat. Selain itu, pengaruh perubahan parameter terhadap perilaku model diteliti dengan analisis sensitivitas terhadap beberapa parameter kunci, seperti ukuran lot, stok pengaman dan total biaya persediaan. Pada penelitian ini juga dibuat model simulasi untuk melihat performansi model matematis pada kondisi nyata. Kata kunci: model gabungan, permintaan probabilistik, lot pengiriman, supply chain

  17. 7 CFR 993.104 - Lot.

    Science.gov (United States)

    2010-01-01

    ... means any quantity of prunes delivered by one producer or one dehydrator to a handler on which... purposes of §§ 993.50 and 993.150 means: (1) With respect to in-line inspection either (i) the aggregate... identification (e.g., brand) if in consumer packages, and offered for inspection as a lot; or (ii) prunes...

  18. Selection of seed lots of Pinus taeda L. for tissue culture

    Directory of Open Access Journals (Sweden)

    Diego Pascoal Golle

    2014-06-01

    Full Text Available The aim of this work was to identify the fungi genera associated with three Pinus taeda L. seed lots and to assess the sanitary and physiological quality of these lots for use as selection criteria for tissue culture and evaluate the in vitro establishment of explants from seminal origin in different nutritive media. It was possible to discriminate the lots on the sanitary and physiological quality, as well as to establish in vitro plants of Pinus taeda from cotyledonary nodes obtained from aseptic seed germination of a selected lot by the sanitary and physiological quality higher. The nutritive media MS, ½ MS and WPM were equally suitable for this purpose. For the sanitary analysis the fungal genera Fusarium, Penicillium and Trichoderma were those of the highest sensitivity. For the physiological evaluation were important the variables: abnormal seedlings, strong normal seedlings; length, fresh and dry weight of strong normal seedlings. The analyzes were favorable to choose lots of seeds for in vitro culture and all culture media were adequate for the establishment of this species in tissue culture.

  19. A Comparative Study on the Lot Release Systems for Vaccines as of 2016.

    Science.gov (United States)

    Fujita, Kentaro; Naito, Seishiro; Ochiai, Masaki; Konda, Toshifumi; Kato, Atsushi

    2017-09-25

    Many countries have already established their own vaccine lot release system that is designed for each country's situation: while the World Health Organization promotes for the convergence of these regulatory systems so that vaccines of assured quality are provided globally. We conducted a questionnaire-based investigation of the lot release systems for vaccines in 7 countries and 2 regions. We found that a review of the summary protocol by the National Regulatory Authorities was commonly applied for the independent lot release of vaccines, however, we also noted some diversity between countries, especially in regard to the testing policy. Some countries and regions, including Japan, regularly tested every lot of vaccines, whereas the frequency of these tests was reduced in other countries and regions as determined based on the risk assessment of these products. Test items selected for the lot release varied among the countries or regions investigated, although there was a tendency to prioritize the potency tests. An understanding of the lot release policy may contribute to improving and harmonizing the lot release system globally in the future.

  20. LOD-a-lot : A queryable dump of the LOD cloud

    NARCIS (Netherlands)

    Fernández, Javier D.; Beek, Wouter; Martínez-Prieto, Miguel A.; Arias, Mario

    2017-01-01

    LOD-a-lot democratizes access to the Linked Open Data (LOD) Cloud by serving more than 28 billion unique triples from 650, K datasets over a single self-indexed file. This corpus can be queried online with a sustainable Linked Data Fragments interface, or downloaded and consumed locally: LOD-a-lot

  1. Optimal Multi-Level Lot Sizing for Requirements Planning Systems

    OpenAIRE

    Earle Steinberg; H. Albert Napier

    1980-01-01

    The wide spread use of advanced information systems such as Material Requirements Planning (MRP) has significantly altered the practice of dependent demand inventory management. Recent research has focused on development of multi-level lot sizing heuristics for such systems. In this paper, we develop an optimal procedure for the multi-period, multi-product, multi-level lot sizing problem by modeling the system as a constrained generalized network with fixed charge arcs and side constraints. T...

  2. La vallée du Lot en Lot-et-Garonne : inventaire topographique

    Directory of Open Access Journals (Sweden)

    Hélène Mousset

    2012-04-01

    Full Text Available La remise en navigation du Lot est à l’origine du projet d’inventaire du patrimoine de la vallée dans sa partie lot-et-garonnaise1. L’ampleur du territoire - 12 cantons riverains2 - et de la perspective historique - du Moyen Age à nos jours - imposaient d’emblée rigueur et objectifs clairs : méthode raisonnée de l’inventaire topographique pour un bilan homogène du patrimoine, fondée sur une enquête systématique du paysage bâti et du mobilier public, sans a priori. Le premier résultat est un catalogue patrimonial sous forme de bases de données3. Mais ce corpus documentaire hétérogène et touffu n’est pas une addition de monographies : il peut et doit être interrogé et exploité comme un ensemble apportant une connaissance renouvelée du territoire. Sans prétendre réaliser une synthèse de la totalité des données pour l’ensemble de la vallée4, les exemples qui vont suivre illustreront la façon dont le travail d’inventaire apporte réponses et nouvelles interrogations, concernant notamment l’occupation du sol, les paysages et l’architecture de cette partie de l’Agenais. Recherche de l’empreinte d’une époque déterminée, examen de la permanence des paysages bâtis sur la longue durée et observation des traces de mutations et flexions historiques, sont un triple niveau d’analyse attendu dans le cadre d’un inventaire sur un vaste territoire rural.The plan to reintroduce navigation on the Lot in the part of the river that flows through the Lot-et-Garonne department was at the origins of a survey of the heritage along the course of the river. The geographical scope of the survey was large (12 cantons along the river and the period covered by the heritage extends from the Middle ages up to the present day. The variety of buildings to be covered required a rigorous approach and clear objectives. The method of the topographical inventory was tailored to the production of a homogenous heritage audit

  3. 21 CFR 203.38 - Sample lot or control numbers; labeling of sample units.

    Science.gov (United States)

    2010-04-01

    ... numbers; labeling of sample units. (a) Lot or control number required on drug sample labeling and sample... identifying lot or control number that will permit the tracking of the distribution of each drug sample unit... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Sample lot or control numbers; labeling of sample...

  4. Manufacturability: from design to SPC limits through "corner-lot" characterization

    Science.gov (United States)

    Hogan, Timothy J.; Baker, James C.; Wesneski, Lisa; Black, Robert S.; Rothenbury, Dave

    2005-01-01

    Texas Instruments" Digital Micro-mirror Device, is used in a wide variety of optical display applications ranging from fixed and portable projectors to high-definition television (HDTV) to digital cinema projection systems. A new DMD pixel architecture, called "FTP", was designed and qualified by Texas Instruments DLPTMTM Group in 2003 to meet increased performance objectives for brightness and contrast ratio. Coordination between design, test and fabrication groups was required to balance pixel performance requirements and manufacturing capability. "Corner Lot" designed experiments (DOE) were used to verify "fabrication space" available for the pixel design. The corner lot technique allows confirmation of manufacturability projections early in the design/qualification cycle. Through careful design and analysis of the corner-lot DOE, a balance of critical dimension (cd) "budgets" is possible so that specification and process control limits can be established that meet both customer and factory requirements. The application of corner-lot DOE is illustrated in a case history of the DMD "FTP" pixel. The process for balancing test parameter requirements with multiple critical dimension budgets is shown. MEMS/MOEMS device design and fabrication can use similar techniques to achieve agressive design-to-qualification goals.

  5. Morphology of gills of the seawater fish Cathorops spixii (Agassiz (Ariidae by scanning and transmission electron microscopy

    Directory of Open Access Journals (Sweden)

    Daura R. Eiras-Stofella

    2002-12-01

    Full Text Available Gills of the seawater fish Cathorops spixii (Agassiz, 1829 were submitted to routine processing for observation in scanning and transmission electron microscopy. The wrinkled surface of the gill filaments showed well-defined cellular ultrastructures. Microridges on cellular surface were projected over all gill structures, including respiratory lamellae. Chloride cells were usually at primary lamellae. Some rodlet cells were found. Mucous secretory cells were uncommon at all parts of the gill arches. The pharyngeal region of the gill arches showed a lot of taste buds but no spines. There were small and strong rakers. Such morphology is indicative of fishes that swallow small food but do not have filtering habits. At the ultrastructural level the gills of C. spixii presented the typical morphological pattern of Teleostei fishes.

  6. The economic lot size and relevant costs

    NARCIS (Netherlands)

    Corbeij, M.H.; Jansen, R.A.; Grübström, R.W.; Hinterhuber, H.H.; Lundquist, J.

    1993-01-01

    In many accounting textbooks it is strongly argued that decisions should always be evaluated on relevant costs; that is variable costs and opportunity costs. Surprisingly, when it comes to Economic Order Quantities or Lot Sizes, some textbooks appear to be less straightforward. The question whether

  7. Ammonia losses and nitrogen partitioning at a southern High Plains open lot dairy

    Science.gov (United States)

    Todd, Richard W.; Cole, N. Andy; Hagevoort, G. Robert; Casey, Kenneth D.; Auvermann, Brent W.

    2015-06-01

    Animal agriculture is a significant source of ammonia (NH3). Cattle excrete most ingested nitrogen (N); most urinary N is converted to NH3, volatilized and lost to the atmosphere. Open lot dairies on the southern High Plains are a growing industry and face environmental challenges as well as reporting requirements for NH3 emissions. We quantified NH3 emissions from the open lot and wastewater lagoons of a commercial New Mexico dairy during a nine-day summer campaign. The 3500-cow dairy consisted of open lot, manure-surfaced corrals (22.5 ha area). Lactating cows comprised 80% of the herd. A flush system using recycled wastewater intermittently removed manure from feeding alleys to three lagoons (1.8 ha area). Open path lasers measured atmospheric NH3 concentration, sonic anemometers characterized turbulence, and inverse dispersion analysis was used to quantify emissions. Ammonia fluxes (15-min) averaged 56 and 37 μg m-2 s-1 at the open lot and lagoons, respectively. Ammonia emission rate averaged 1061 kg d-1 at the open lot and 59 kg d-1 at the lagoons; 95% of NH3 was emitted from the open lot. The per capita emission rate of NH3 was 304 g cow-1 d-1 from the open lot (41% of N intake) and 17 g cow-1 d-1 from lagoons (2% of N intake). Daily N input at the dairy was 2139 kg d-1, with 43, 36, 19 and 2% of the N partitioned to NH3 emission, manure/lagoons, milk, and cows, respectively.

  8. Lot Sizing Based on Stochastic Demand and Service Level Constraint

    Directory of Open Access Journals (Sweden)

    hajar shirneshan

    2012-06-01

    Full Text Available Considering its application, stochastic lot sizing is a significant subject in production planning. Also the concept of service level is more applicable than shortage cost from managers' viewpoint. In this paper, the stochastic multi period multi item capacitated lot sizing problem has been investigated considering service level constraint. First, the single item model has been developed considering service level and with no capacity constraint and then, it has been solved using dynamic programming algorithm and the optimal solution has been derived. Then the model has been generalized to multi item problem with capacity constraint. The stochastic multi period multi item capacitated lot sizing problem is NP-Hard, hence the model could not be solved by exact optimization approaches. Therefore, simulated annealing method has been applied for solving the problem. Finally, in order to evaluate the efficiency of the model, low level criterion has been used .

  9. Structural characterization of annatto seeds (Bixa orellana) by transmission and scanning electron microscopy submitted to gamma radiation for dormancy break

    Energy Technology Data Exchange (ETDEWEB)

    Harder, Marcia N.C.; Nogueira, Neusa L.; Arthur, Valter; Rossi, Monica L.; Rodriguez, Adriana P.M. [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil)]. E-mails: mnharder@cena.usp.br; nogueira@cena.usp.br; arthur@cena.usp.br; mnicalr@cena.usp.br; riana@cena.usp.br

    2007-07-01

    The annatto (Bixa orellana) is the only species of the Bixaceae family. From the seeds an important food colorant is obtained, bixin, for the industry and domestic use. More recently studies have focused more extensively in medicinal purpose of the species. Due to structural and physiologic characteristics, the seeds have low germination rate, around 30 %. The irradiation of seeds with gamma radiation can promote the increase and/or acceleration of germination, better plant development and productivity, among other aspects. The radiation doses used for this purpose should not cause genetic modifications in the organism, hence experimentation is needed to define the appropriate doses. Absence of research done annatto related to the use of the irradiation aiming at the increase of germination rates lead to the structural characterization of the annatto seeds submitted to gamma radiation through transmission (TEM) and scanning electron microscopy (SEM). The objective of this study was to verify the effect of radiation on the seeds structures during the process of dormancy break. Dry seeds and seeds immersed in distilled water for 24 hours were submitted to gamma radiation from source of Co{sup 60} type Gammacell-220 at CENA/USP, at doses 100 Gy. After irradiation the seeds were processed for TEM and SEM. Preliminary results, showed structural modifications in the seeds. (author)

  10. A comparison of particle swarm optimizations for uncapacitated multilevel lot-sizin problems

    NARCIS (Netherlands)

    Han, Y.; Kaku, I.; Tang, J.; Dellaert, N.P.; Cai, J.; Li, Y.

    2010-01-01

    The multilevel lot-sizing (MLLS) problem is a key production planning problem in the material requirement planning (MRP) system. The MLLS problem deals with determining the production lot sizes of various items appearing in the product structure over a given finite planning horizon to minimize the

  11. The use of knowledge-based Genetic Algorithm for starting time optimisation in a lot-bucket MRP

    Science.gov (United States)

    Ridwan, Muhammad; Purnomo, Andi

    2016-01-01

    In production planning, Material Requirement Planning (MRP) is usually developed based on time-bucket system, a period in the MRP is representing the time and usually weekly. MRP has been successfully implemented in Make To Stock (MTS) manufacturing, where production activity must be started before customer demand is received. However, to be implemented successfully in Make To Order (MTO) manufacturing, a modification is required on the conventional MRP in order to make it in line with the real situation. In MTO manufacturing, delivery schedule to the customers is defined strictly and must be fulfilled in order to increase customer satisfaction. On the other hand, company prefers to keep constant number of workers, hence production lot size should be constant as well. Since a bucket in conventional MRP system is representing time and usually weekly, hence, strict delivery schedule could not be accommodated. Fortunately, there is a modified time-bucket MRP system, called as lot-bucket MRP system that proposed by Casimir in 1999. In the lot-bucket MRP system, a bucket is representing a lot, and the lot size is preferably constant. The time to finish every lot could be varying depends on due date of lot. Starting time of a lot must be determined so that every lot has reasonable production time. So far there is no formal method to determine optimum starting time in the lot-bucket MRP system. Trial and error process usually used for it but some time, it causes several lots have very short production time and the lot-bucket MRP would be infeasible to be executed. This paper presents the use of Genetic Algorithm (GA) for optimisation of starting time in a lot-bucket MRP system. Even though GA is well known as powerful searching algorithm, however, improvement is still required in order to increase possibility of GA in finding optimum solution in shorter time. A knowledge-based system has been embedded in the proposed GA as the improvement effort, and it is proven that the

  12. COAP BASED ACUTE PARKING LOT MONITORING SYSTEM USING SENSOR NETWORKS

    Directory of Open Access Journals (Sweden)

    R. Aarthi

    2014-06-01

    Full Text Available Vehicle parking is the act of temporarily maneuvering a vehicle in to a certain location. To deal with parking monitoring system issue such as traffic, this paper proposes a vision of improvements in monitoring the vehicles in parking lots based on sensor networks. Most of the existing paper deals with that of the automated parking which is of cluster based and each has its own overheads like high power, less energy efficiency, incompatible size of lots, space. The novel idea in this work is usage of CoAP (Constrained Application Protocol which is recently created by IETF (draft-ietf-core-coap-18, June 28, 2013, CoRE group to develop RESTful application layer protocol for communications within embedded wireless networks. This paper deals with the enhanced CoAP protocol using multi hop flat topology, which makes the acuters feel soothe towards parking vehicles. We aim to minimize the time consumed for finding free parking lot as well as increase the energy efficiency

  13. Determination of supplier-to-supplier and lot-to-lot variability in glycation of recombinant human serum albumin expressed in Oryza sativa.

    Directory of Open Access Journals (Sweden)

    Grant E Frahm

    Full Text Available The use of different expression systems to produce the same recombinant human protein can result in expression-dependent chemical modifications (CMs leading to variability of structure, stability and immunogenicity. Of particular interest are recombinant human proteins expressed in plant-based systems, which have shown particularly high CM variability. In studies presented here, recombinant human serum albumins (rHSA produced in Oryza sativa (Asian rice (OsrHSA from a number of suppliers have been extensively characterized and compared to plasma-derived HSA (pHSA and rHSA expressed in yeast (Pichia pastoris and Saccharomyces cerevisiae. The heterogeneity of each sample was evaluated using size exclusion chromatography (SEC, reversed-phase high-performance liquid chromatography (RP-HPLC and capillary electrophoresis (CE. Modifications of the samples were identified by liquid chromatography-mass spectrometry (LC-MS. The secondary and tertiary structure of the albumin samples were assessed with far U/V circular dichroism spectropolarimetry (far U/V CD and fluorescence spectroscopy, respectively. Far U/V CD and fluorescence analyses were also used to assess thermal stability and drug binding. High molecular weight aggregates in OsrHSA samples were detected with SEC and supplier-to-supplier variability and, more critically, lot-to-lot variability in one manufactures supplied products were identified. LC-MS analysis identified a greater number of hexose-glycated arginine and lysine residues on OsrHSA compared to pHSA or rHSA expressed in yeast. This analysis also showed supplier-to-supplier and lot-to-lot variability in the degree of glycation at specific lysine and arginine residues for OsrHSA. Both the number of glycated residues and the degree of glycation correlated positively with the quantity of non-monomeric species and the chromatographic profiles of the samples. Tertiary structural changes were observed for most OsrHSA samples which

  14. 21 CFR 610.1 - Tests prior to release required for each lot.

    Science.gov (United States)

    2010-04-01

    ....1 Section 610.1 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... release required for each lot. No lot of any licensed product shall be released by the manufacturer prior... considered in determining whether or not the test results meet the test objective, except that a test result...

  15. Improving aggregate behavior in parking lots with appropriate local maneuvers

    KAUST Repository

    Rodriguez, Samuel

    2013-11-01

    In this paper we study the ingress and egress of pedestrians and vehicles in a parking lot. We show how local maneuvers executed by agents permit them to create trajectories in constrained environments, and to resolve the deadlocks between them in mixed-flow scenarios. We utilize a roadmap-based approach which allows us to map complex environments and generate heuristic local paths that are feasible for both pedestrians and vehicles. Finally, we examine the effect that some agent-behavioral parameters have on parking lot ingress and egress. © 2013 IEEE.

  16. Density and field effect on electron-ion collision cross-sections in hot dense plasma

    International Nuclear Information System (INIS)

    Gaufridy de Dortan, F. de

    2003-03-01

    Collisional excitation cross-sections are essential for the modeling of the properties of non equilibrium plasmas. There has been a lot of work on electron impact excitation of isolated ions, but in dense plasmas, neighboring particles are expected to widely disturb these electron transitions in atoms. Plasma modeling through a radially perturbed potential has already been done but is not satisfactory as it does not account for levels degeneracy breaking and its consequences. Introduction of a quasistatic electric micro-field of neighboring ions allows us to break spherical symmetry. Our original theoretical study has given birth to a numerical code that accurately computes collisional strengths and rates (in the Distorted Waves approach) in atoms submitted to a realistic micro-field. Hydrogen- and helium-like aluminium is studied. Stark mixing widely increases rates of transitions from high l levels and forbidden transitions are field-enhanced by many orders of magnitude until they reach allowed ones. Eventually, we conduct an elementary stationary collisional radiative study to investigate field-enhancement effects on corresponding line shapes. In cases we study (aluminium, hydrogen- and helium-like) we find a relatively weak increase of K-shell line broadening

  17. A Heuristic Approach for Determining Lot Sizes and Schedules Using Power-of-Two Policy

    Directory of Open Access Journals (Sweden)

    Esra Ekinci

    2007-01-01

    Full Text Available We consider the problem of determining realistic and easy-to-schedule lot sizes in a multiproduct, multistage manufacturing environment. We concentrate on a specific type of production, namely, flow shop type production. The model developed consists of two parts, lot sizing problem and scheduling problem. In lot sizing problem, we employ binary integer programming and determine reorder intervals for each product using power-of-two policy. In the second part, using the results obtained of the lot sizing problem, we employ mixed integer programming to determine schedules for a multiproduct, multistage case with multiple machines in each stage. Finally, we provide a numerical example and compare the results with similar methods found in practice.

  18. MOTIVASI PEREMPUAN MEMBUKA USAHA SEKTOR INFORMAL DI DAYA TARIK WISATA TANAH LOT, TABANAN

    Directory of Open Access Journals (Sweden)

    Luh Putu Aritiana Kumala Pratiwi

    2016-08-01

    Full Text Available The development of tourism in Tanah Lot has been able to open up opportunities for local women. The businesses that mostly cultivated by women are the selling of traditional snacks of klepon, postcards, and hairpins.Women who participate should reconsider their decision to choose a dual role, both as housewives and sellers in Tanah Lot.This article analyzes the motivation of Women in opening a business in Tanah Lot area.The results showed that the motivation of women to open a business in the informal sector in Tanah Lot, namely to be able to meet the physiological needs, safety needs, affiliations, appreciation, self-actualization, and add to work experience. The factors that affect women’s motivations are internal factors such as age, educational background, family income, and marital status. While the external factors namely selling location, the condition of selling place, and having their own income.

  19. Parcels and Land Ownership, Square-mile, section-wide, property ownerhip parcel and lot-block boundaries. Includes original platted lot lines. These coverages are maintained interactively by GIS staff. Primary attributes include Parcel IDS (Control, Key, and PIN), platted lot and, Published in 2008, 1:1200 (1in=100ft) scale, Sedgwick County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Parcels and Land Ownership dataset current as of 2008. Square-mile, section-wide, property ownerhip parcel and lot-block boundaries. Includes original platted lot...

  20. Shelf life extension for the lot AAE nozzle severance LSCs

    Science.gov (United States)

    Cook, M.

    1990-01-01

    Shelf life extension tests for the remaining lot AAE linear shaped charges for redesigned solid rocket motor nozzle aft exit cone severance were completed in the small motor conditioning and firing bay, T-11. Five linear shaped charge test articles were thermally conditioned and detonated, demonstrating proper end-to-end charge propagation. Penetration depth requirements were exceeded. Results indicate that there was no degradation in performance due to aging or the linear shaped charge curving process. It is recommended that the shelf life of the lot AAE nozzle severance linear shaped charges be extended through January 1992.

  1. A non-permutation flowshop scheduling problem with lot streaming: A Mathematical model

    Directory of Open Access Journals (Sweden)

    Daniel Rossit

    2016-06-01

    Full Text Available In this paper we investigate the use of lot streaming in non-permutation flowshop scheduling problems. The objective is to minimize the makespan subject to the standard flowshop constraints, but where it is now permitted to reorder jobs between machines. In addition, the jobs can be divided into manageable sublots, a strategy known as lot streaming. Computational experiments show that lot streaming reduces the makespan up to 43% for a wide range of instances when compared to the case in which no job splitting is applied. The benefits grow as the number of stages in the production process increases but reach a limit. Beyond a certain point, the division of jobs into additional sublots does not improve the solution.

  2. Thermo-hydro-geochemical modelling of the bentonite buffer. LOT A2 experiment

    Energy Technology Data Exchange (ETDEWEB)

    Sena, Clara; Salas, Joaquin; Arcos, David (Amphos 21 Consulting S.L., Barcelona (Spain))

    2010-12-15

    The Swedish Nuclear Fuel and waste management company (SKB) is conducting a series of long term buffer material (LOT) tests at the Aespoe Hard Rock Laboratory (HRL) to test the behaviour of the bentonite buffer under conditions similar to those expected in a KBS-3 deep geological repository for high level nuclear waste (HLNW). In the present work a numerical model is developed to simulate (i) the thermo-hydraulic, (ii) transport and (iii) geochemical processes that have been observed in the LOT A2 test parcel. The LOT A2 test lasted approximately 6 years, and consists of a 4 m long vertical borehole drilled in diorite rock, from the ground of the Aespoe HRL tunnel. The borehole is composed of a central heater, maintained at 130 deg C in the lower 2 m of the borehole, a copper tube surrounding the heater and a 100 mm thick ring of pre-compacted Wyoming MX-80 bentonite around the copper tube /Karnland et al. 2009/. The numerical model developed here is a 1D axis-symmetric model that simulates the water saturation of the bentonite under a constant thermal gradient; the transport of solutes; and, the geochemical reactions observed in the bentonite blocks. Two cases have been modelled, one considering the highest temperature reached by the bentonite (at 3 m depth in the borehole, where temperatures of 130 and 85 deg C have been recorded near the copper tube and near the granitic host rock, respectively) and the other case assuming a constant temperature of 25 deg C, representing the upper part of borehole, where the bentonite has not been heated. In the LOT A2 test, the initial partially saturated bentonite becomes progressively water saturated, due to the injection of Aespoe granitic groundwater at granite - bentonite interface. The transport of solutes during the bentonite water saturation stage is believed to be controlled by water uptake from the surrounding groundwater to the wetting front and, additionally, in the case of heated bentonite, by a cyclic evaporation

  3. Thermo-hydro-geochemical modelling of the bentonite buffer. LOT A2 experiment

    International Nuclear Information System (INIS)

    Sena, Clara; Salas, Joaquin; Arcos, David

    2010-12-01

    The Swedish Nuclear Fuel and waste management company (SKB) is conducting a series of long term buffer material (LOT) tests at the Aespoe Hard Rock Laboratory (HRL) to test the behaviour of the bentonite buffer under conditions similar to those expected in a KBS-3 deep geological repository for high level nuclear waste (HLNW). In the present work a numerical model is developed to simulate (i) the thermo-hydraulic, (ii) transport and (iii) geochemical processes that have been observed in the LOT A2 test parcel. The LOT A2 test lasted approximately 6 years, and consists of a 4 m long vertical borehole drilled in diorite rock, from the ground of the Aespoe HRL tunnel. The borehole is composed of a central heater, maintained at 130 deg C in the lower 2 m of the borehole, a copper tube surrounding the heater and a 100 mm thick ring of pre-compacted Wyoming MX-80 bentonite around the copper tube /Karnland et al. 2009/. The numerical model developed here is a 1D axis-symmetric model that simulates the water saturation of the bentonite under a constant thermal gradient; the transport of solutes; and, the geochemical reactions observed in the bentonite blocks. Two cases have been modelled, one considering the highest temperature reached by the bentonite (at 3 m depth in the borehole, where temperatures of 130 and 85 deg C have been recorded near the copper tube and near the granitic host rock, respectively) and the other case assuming a constant temperature of 25 deg C, representing the upper part of borehole, where the bentonite has not been heated. In the LOT A2 test, the initial partially saturated bentonite becomes progressively water saturated, due to the injection of Aespoe granitic groundwater at granite - bentonite interface. The transport of solutes during the bentonite water saturation stage is believed to be controlled by water uptake from the surrounding groundwater to the wetting front and, additionally, in the case of heated bentonite, by a cyclic evaporation

  4. Single product lot-sizing on unrelated parallel machines with non-decreasing processing times

    Science.gov (United States)

    Eremeev, A.; Kovalyov, M.; Kuznetsov, P.

    2018-01-01

    We consider a problem in which at least a given quantity of a single product has to be partitioned into lots, and lots have to be assigned to unrelated parallel machines for processing. In one version of the problem, the maximum machine completion time should be minimized, in another version of the problem, the sum of machine completion times is to be minimized. Machine-dependent lower and upper bounds on the lot size are given. The product is either assumed to be continuously divisible or discrete. The processing time of each machine is defined by an increasing function of the lot volume, given as an oracle. Setup times and costs are assumed to be negligibly small, and therefore, they are not considered. We derive optimal polynomial time algorithms for several special cases of the problem. An NP-hard case is shown to admit a fully polynomial time approximation scheme. An application of the problem in energy efficient processors scheduling is considered.

  5. INTEGRATION OF PRODUCTION AND SUPPLY IN THE LEAN MANUFACTURING CONDITIONS ACCORDING TO THE LOT FOR LOT METHOD LOGIC - RESULTS OF RESEARCH

    Directory of Open Access Journals (Sweden)

    Roman Domański

    2015-12-01

    Full Text Available Background: The review of literature and observations of business practice indicate that integration of production and supply is not a well-developed area of science. The author notes that the publications on the integration most often focus on selected detailed aspects and are rather postulative in character. This is accompanied by absence of specific utilitarian solutions (tools which could be used in business practice. Methods: The research was conducted between 2009 and 2010 in a company in Wielkopolska which operates in the machining sector. The solution of the research problem is based on the author's own concept - the integration model. The cost concept of the solution was built and verified (case study on the basis of conditions of a given enterprise (industrial data. Results: Partial verifiability of results was proved in the entire set of selected material indexes (although in two cases out of three the costs differences to the disadvantage of the lot-for-lot method were small. In case of structure of studied product range, a significant conformity of results in the order of 67% was achieved for items typically characteristic for the LfL method (group AX. Conclusions: The formulated research problem and the result of its solution (only 6 material items demand a lot (orthodoxy in terms of implementation conditions. The concept of the solution has a narrow field of application in the selected organizational conditions (studied enterprise. It should be verified by independent studies of this kind at other enterprises.

  6. Deflection test evaluation of different lots of the same nickel-titanium wire commercial brand

    Directory of Open Access Journals (Sweden)

    Murilo Gaby Neves

    2016-02-01

    Full Text Available Introduction: The aim of this in vitro study was to compare the elastic properties of the load-deflection ratio of orthodontic wires of different lot numbers and the same commercial brand. Methods: A total of 40 nickel-titanium (NiTi wire segments (Morelli OrtodontiaTM - Sorocaba, SP, Brazil, 0.016-in in diameter were used. Groups were sorted according to lot numbers (lots 1, 2, 3 and 4. 28-mm length segments from the straight portion (ends of archwires were used. Deflection tests were performed in an EMIC universal testing machine with 5-N load cell at 1 mm/minute speed. Force at deactivation was recorded at 0.5, 1, 2 and 3 mm deflection. Analysis of variance (ANOVA was used to compare differences between group means. Results: When comparing the force of groups at the same deflection (3, 2 and 1 mm, during deactivation, no statistical differences were found. Conclusion: There are no changes in the elastic properties of different lots of the same commercial brand; thus, the use of different lots of the orthodontic wires used in this research does not compromise the final outcomes of the load-deflection ratio.

  7. Deflection test evaluation of different lots of the same nickel-titanium wire commercial brand.

    Science.gov (United States)

    Neves, Murilo Gaby; Lima, Fabrício Viana Pereira; Gurgel, Júlio de Araújo; Pinzan-Vercelino, Célia Regina Maio; Rezende, Fernanda Soares; Brandão, Gustavo Antônio Martins

    2016-01-01

    The aim of this in vitro study was to compare the elastic properties of the load-deflection ratio of orthodontic wires of different lot numbers and the same commercial brand. A total of 40 nickel-titanium (NiTi) wire segments (Morelli Ortodontia™--Sorocaba, SP, Brazil), 0.016-in in diameter were used. Groups were sorted according to lot numbers (lots 1, 2, 3 and 4). 28-mm length segments from the straight portion (ends) of archwires were used. Deflection tests were performed in an EMIC universal testing machine with 5-N load cell at 1 mm/minute speed. Force at deactivation was recorded at 0.5, 1, 2 and 3 mm deflection. Analysis of variance (ANOVA) was used to compare differences between group means. When comparing the force of groups at the same deflection (3, 2 and 1 mm), during deactivation, no statistical differences were found. There are no changes in the elastic properties of different lots of the same commercial brand; thus, the use of different lots of the orthodontic wires used in this research does not compromise the final outcomes of the load-deflection ratio.

  8. Mentha spicata L. infusions as sources of antioxidant phenolic compounds: emerging reserve lots with special harvest requirements.

    Science.gov (United States)

    Rita, Ingride; Pereira, Carla; Barros, Lillian; Santos-Buelga, Celestino; Ferreira, Isabel C F R

    2016-10-12

    Mentha spicata L., commonly known as spearmint, is widely used in both fresh and dry forms, for infusion preparation or in European and Indian cuisines. Recently, with the evolution of the tea market, several novel products with added value are emerging, and the standard lots have evolved to reserve lots, with special harvest requirements that confer them with enhanced organoleptic and sensorial characteristics. The apical leaves of these batches are collected in specific conditions having, then, a different chemical profile. In the present study, standard and reserve lots of M. spicata were assessed in terms of the antioxidants present in infusions prepared from the different lots. The reserve lots presented the highest concentration in all the compounds identified in relation to the standard lots, with 326 and 188 μg mL -1 of total phenolic compounds, respectively. Both types of samples presented rosmarinic acid as the most abundant phenolic compound, at concentrations of 169 and 101 μg mL -1 for reserve and standard lots, respectively. The antioxidant activity was higher in the reserve lots which had the highest total phenolic compounds content, with EC 50 values ranging from 152 to 336 μg mL -1 . The obtained results provide scientific information that may allow the consumer to make a conscientious choice.

  9. Coal-tar-based parking lot sealcoat: An unrecognized source of PAH to settled house dust

    Science.gov (United States)

    Mahler, B.J.; Van Metre, P.C.; Wilson, J.T.; Musgrove, M.; Burbank, T.L.; Ennis, T.E.; Bashara, T.J.

    2010-01-01

    Despite much speculation, the principal factors controlling concentrations of polycyclic aromatic hydrocarbons (PAH) in settled house dust (SHD) have not yet been identified. In response to recent reports that dust from pavement with coaltar-based sealcoat contains extremely high concentrations of PAH, we measured PAH in SHD from 23 apartments and in dust from their associated parking lots, one-half of which had coal-tar-based sealcoat (CT). The median concentration of total PAH (T-PAH) in dust from CT parking lots (4760 ??g/g, n = 11) was 530 times higher than that from parking lots with other pavement surface types (asphalt-based sealcoat, unsealed asphalt, concrete [median 9.0 ??g/g, n = 12]). T-PAH in SHD from apartments with CT parking lots (median 129 ??g/g) was 25 times higher than that in SHD from apartments with parking lots with other pavement surface types (median 5.1 ??g/g). Presence or absence of CT on a parking lot explained 48% of the variance in log-transformed T-PAH in SHD. Urban land-use intensity near the residence also had a significant but weaker relation to T-PAH. No other variables tested, including carpeting, frequency of vacuuming, and indoor burning, were significant. ?? 2010 American Chemical Society.

  10. Military Observer Mission Ecuador-Peru (MOMEP) Doing a Lot with a Little.

    Science.gov (United States)

    1997-06-01

    IPS), URL: <htttp://web.maxwell.syr.edu.nativew...aphy/latinam/ ecuador /borderl6.html>, accessed 10 November 1996, pp. 1-2. 蔵 "Evacuees in Loja Number...OBSERVER MISSION ECUADOR -PERU (MOMEP) DOING A LOT WITH A LITTLE BY LIEUTENANT COLONEL KEVIN M. HIGGINS United States Army DISTRIBUTION STATEMENT A...MISSION ECUADOR -PERU (MOMEP) Doing A Lot With a Little by Lieutenant Colonel Kevin M. Higgins United States Army Naval Postgraduate School Special

  11. Hybrid Discrete Differential Evolution Algorithm for Lot Splitting with Capacity Constraints in Flexible Job Scheduling

    Directory of Open Access Journals (Sweden)

    Xinli Xu

    2013-01-01

    Full Text Available A two-level batch chromosome coding scheme is proposed to solve the lot splitting problem with equipment capacity constraints in flexible job shop scheduling, which includes a lot splitting chromosome and a lot scheduling chromosome. To balance global search and local exploration of the differential evolution algorithm, a hybrid discrete differential evolution algorithm (HDDE is presented, in which the local strategy with dynamic random searching based on the critical path and a random mutation operator is developed. The performance of HDDE was experimented with 14 benchmark problems and the practical dye vat scheduling problem. The simulation results showed that the proposed algorithm has the strong global search capability and can effectively solve the practical lot splitting problems with equipment capacity constraints.

  12. Chemical analysis of DC745 Materials: DEV Lot 1 reinvestigation; barcodes P053387, P053388, and P053389

    Energy Technology Data Exchange (ETDEWEB)

    Dirmyer, Matthew R. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-09

    This report serves as a follow up to our initial development lot 1 chemical analysis report (LA-UR-16-21970). The purpose of that report was to determine whether or not certain combinations of resin lots and curing agent lots resulted in chemical differences in the final material. One finding of that report suggested that pad P053389 was different from the three other pads analyzed. This report consists of chemical analysis of P053387, P053388, and a reinvestigation of P053389 all of which came from the potentially suspect combination of resin and curing agents lot. The goal of this report is to determine whether the observations relating to P053389 were isolated to that particular pad or systemic to that combination of resin and curing agent lot. The following suite of analyses were performed on the pads: Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), Fourier Transform Infrared Spectroscopy (FT-IR), and Solid State Nuclear Magnetic Resonance (NMR). The overall conclusions of the study are that pads P053387 and P053388 behave more consistently with the pads of other resin lot and curing agent lot combinations and that the chemical observations made regarding pad P053389 are isolated to that pad and not representative of an issue with that resin lot and curing agent lot combination.

  13. Statistical validation of reagent lot change in the clinical chemistry laboratory can confer insights on good clinical laboratory practice.

    Science.gov (United States)

    Cho, Min-Chul; Kim, So Young; Jeong, Tae-Dong; Lee, Woochang; Chun, Sail; Min, Won-Ki

    2014-11-01

    Verification of new lot reagent's suitability is necessary to ensure that results for patients' samples are consistent before and after reagent lot changes. A typical procedure is to measure results of some patients' samples along with quality control (QC) materials. In this study, the results of patients' samples and QC materials in reagent lot changes were analysed. In addition, the opinion regarding QC target range adjustment along with reagent lot changes was proposed. Patients' sample and QC material results of 360 reagent lot change events involving 61 analytes and eight instrument platforms were analysed. The between-lot differences for the patients' samples (ΔP) and the QC materials (ΔQC) were tested by Mann-Whitney U tests. The size of the between-lot differences in the QC data was calculated as multiples of standard deviation (SD). The ΔP and ΔQC values only differed significantly in 7.8% of the reagent lot change events. This frequency was not affected by the assay principle or the QC material source. One SD was proposed for the cutoff for maintaining pre-existing target range after reagent lot change. While non-commutable QC material results were infrequent in the present study, our data confirmed that QC materials have limited usefulness when assessing new reagent lots. Also a 1 SD standard for establishing a new QC target range after reagent lot change event was proposed. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  14. Nutrient concentrations in leachate and runoff from dairy cattle lots with different surface materials

    Science.gov (United States)

    Nitrogen (N) and phosphorus (P) loss from agriculture persists as a water quality issue, and outdoor cattle lots can have a high loss potential. We monitored hydrology and nutrient concentrations in leachate and runoff from dairy heifer lots constructed with three surface materials (soil, sand, bark...

  15. Density and field effect on electron-ion collision cross-sections in hot dense plasma; Etude de l'influence de l'environnement plasma sur les sections efficaces d'excitation collisionnelle electron-ion dans un plasma chaud et dense

    Energy Technology Data Exchange (ETDEWEB)

    Gaufridy de Dortan, F. de

    2003-03-15

    Collisional excitation cross-sections are essential for the modeling of the properties of non equilibrium plasmas. There has been a lot of work on electron impact excitation of isolated ions, but in dense plasmas, neighboring particles are expected to widely disturb these electron transitions in atoms. Plasma modeling through a radially perturbed potential has already been done but is not satisfactory as it does not account for levels degeneracy breaking and its consequences. Introduction of a quasistatic electric micro-field of neighboring ions allows us to break spherical symmetry. Our original theoretical study has given birth to a numerical code that accurately computes collisional strengths and rates (in the Distorted Waves approach) in atoms submitted to a realistic micro-field. Hydrogen- and helium-like aluminium is studied. Stark mixing widely increases rates of transitions from high l levels and forbidden transitions are field-enhanced by many orders of magnitude until they reach allowed ones. Eventually, we conduct an elementary stationary collisional radiative study to investigate field-enhancement effects on corresponding line shapes. In cases we study (aluminium, hydrogen- and helium-like) we find a relatively weak increase of K-shell line broadening.

  16. Safety, immunogenicity, and lot-to-lot consistency of a quadrivalent inactivated influenza vaccine in children, adolescents, and adults: A randomized, controlled, phase III trial.

    Science.gov (United States)

    Cadorna-Carlos, Josefina B; Nolan, Terry; Borja-Tabora, Charissa Fay; Santos, Jaime; Montalban, M Cecilia; de Looze, Ferdinandus J; Eizenberg, Peter; Hall, Stephen; Dupuy, Martin; Hutagalung, Yanee; Pépin, Stéphanie; Saville, Melanie

    2015-05-15

    Inactivated quadrivalent influenza vaccine (IIV4) containing two influenza A strains and one strain from each B lineage (Yamagata and Victoria) may offer broader protection against seasonal influenza than inactivated trivalent influenza vaccine (IIV3), containing a single B strain. This study examined the safety, immunogenicity, and lot consistency of an IIV4 candidate. This phase III, randomized, controlled, multicenter trial in children/adolescents (9 through 17 years) and adults (18 through 60 years) was conducted in Australia and in the Philippines in 2012. The study was double-blind for IIV4 lots and open-label for IIV4 vs IIV3. Children/adolescents were randomized 2:2:2:1 and adults 10:10:10:1 to receive one of three lots of IIV4 or licensed IIV3. Safety data were collected for up to 6 months post-vaccination. Hemagglutination inhibition and seroneutralization antibody titers were assessed pre-vaccination and 21 days post-vaccination. 1648 adults and 329 children/adolescents received IIV4, and 56 adults and 55 children/adolescents received IIV3. Solicited reactions, unsolicited adverse events, and serious adverse events were similar for IIV3 and IIV4 recipients in both age groups. Injection-site pain, headache, malaise, and myalgia were the most frequently reported solicited reactions, most of which were mild and resolved within 3 days. No vaccine-related serious adverse events or deaths were reported. Post-vaccination antibody responses, seroconversion rates, and seroprotection rates for the 3 strains common to both vaccines were comparable for IIV3 and IIV4 in both age groups. Antibody responses to IIV4 were equivalent among vaccine lots and comparable between age groups for each of the 4 strains. IIV4 met all European Medicines Agency immunogenicity criteria for adults for all 4 strains. In both age groups, IIV4 was well tolerated and caused no safety concerns, induced robust antibody responses to all 4 influenza strains, and met all EMA immunogenicity

  17. Study of interactions of a electron beam of 10 MeV energy and matter

    International Nuclear Information System (INIS)

    Askri, Boubaker

    2002-01-01

    In this work, we tried to extend the algorithm of the Monte Carlo method to the case of relativistic electrons of energy 10 MeV through the material, after appropriate to the simple case of non-relativistic electrons of energy 20 keV. It was determined the coefficients of reflection, transmission and absorption of electrons through the middle in both cases. As the energy and angular distributions of electrons transmitted. The results show a fairly good precision on the determination of the three coefficients. For the non-relativistic case, it was in 1000 simulations of 1000 lots electrons for gold and aluminum, it has reached an accuracy of about 0.5 pour cent. For the relativistic case, it was 20 lots of simulations for 500 electrons carbon and aluminum. we reached an accuracy of about 2, 5 pour cent determining the coefficients. The energy and angular distributions of electrons transmitted, are close those derived from the program GEANT, taken as a reference and as comparison tool. It hopes to increase the accuracy by increasing the number of lots and the size of each batch of electrons. However, the process took six days to simulate ten miles electrons under normal conditions on the HP9000 machine calculation takes a greatest time of execution for a statistical sample of smaller great. Several criteria are necessary to optimize the study. About improving the theoretical model and the algorithm, and implementation the procedure on a machine more powerful computing. (Author)

  18. Note sur l'histoire démographique de Douelle (Lot) 1676-1914

    OpenAIRE

    Jean Fourastié

    1986-01-01

    Fourastié Jean. ? Note on the demographic history of Douelle (Lot) 1676-1914. This article summarizes the demographic data contained in a book about the village of Douelle in the department of the Lot. Both family reconstitution and genealogies have been used to ascertain the major demographic characteristics of this region during the 17th and 18th centuries : a high rate of endogamous marriages, few remarriages, declining birth rates before the Revolution, a very low number of illegitimate b...

  19. Process mining for electronic data interchange

    NARCIS (Netherlands)

    Engel, R.; Krathu, W.; Zapletal, M.; Pichler, C.; Aalst, van der W.M.P.; Werthner, H.; Huemer, C.; Setzer, T.

    2011-01-01

    Choreography modeling and service integration received a lot of attention in the last decade. However, most real-world implementations of inter-organizational systems are still realized by traditional Electronic Data Interchange (EDI) standards. In traditional EDI standards, the notion of process or

  20. Evaluation of coverage of enriched UF6 cylinder storage lots by existing criticality accident alarms

    International Nuclear Information System (INIS)

    Lee, B.L. Jr.; Dobelbower, M.C.; Woollard, J.E.; Sutherland, P.J.; Tayloe, R.W. Jr.

    1995-03-01

    The Portsmouth Gaseous Diffusion Plant (PORTS) is leased from the US Department of Energy (DOE) by the United States Enrichment Corporation (USEC), a government corporation formed in 1993. PORTS is in transition from regulation by DOE to regulation by the Nuclear Regulatory Commission (NRC). One regulation is 10 CFR Part 76.89, which requires that criticality alarm systems be provided for the site. PORTS originally installed criticality accident alarm systems in all building for which nuclear criticality accidents were credible. Currently, however, alarm systems are not installed in the enriched uranium hexafluoride (UF 6 ) cylinder storage lots. This report analyzes and documents the extent to which enriched UF 6 cylinder storage lots at PORTS are covered by criticality detectors and alarms currently installed in adjacent buildings. Monte Carlo calculations are performed on simplified models of the cylinder storage lots and adjacent buildings. The storage lots modelled are X-745B, X-745C, X745D, X-745E, and X-745F. The criticality detectors modelled are located in building X-343, the building X-344A/X-342A complex, and portions of building X-330 (see Figures 1 and 2). These criticality detectors are those located closest to the cylinder storage lots. Results of this analysis indicate that the existing criticality detectors currently installed at PORTS are largely ineffective in detecting neutron radiation from criticality accidents in most of the cylinder storage lots at PORTS, except sometimes along portions of their peripheries

  1. Solving lot-sizing problem with quantity discount and transportation cost

    Science.gov (United States)

    Lee, Amy H. I.; Kang, He-Yau; Lai, Chun-Mei

    2013-04-01

    Owing to today's increasingly competitive market and ever-changing manufacturing environment, the inventory problem is becoming more complicated to solve. The incorporation of heuristics methods has become a new trend to tackle the complex problem in the past decade. This article considers a lot-sizing problem, and the objective is to minimise total costs, where the costs include ordering, holding, purchase and transportation costs, under the requirement that no inventory shortage is allowed in the system. We first formulate the lot-sizing problem as a mixed integer programming (MIP) model. Next, an efficient genetic algorithm (GA) model is constructed for solving large-scale lot-sizing problems. An illustrative example with two cases in a touch panel manufacturer is used to illustrate the practicality of these models, and a sensitivity analysis is applied to understand the impact of the changes in parameters to the outcomes. The results demonstrate that both the MIP model and the GA model are effective and relatively accurate tools for determining the replenishment for touch panel manufacturing for multi-periods with quantity discount and batch transportation. The contributions of this article are to construct an MIP model to obtain an optimal solution when the problem is not too complicated itself and to present a GA model to find a near-optimal solution efficiently when the problem is complicated.

  2. The Lot Sizing and Scheduling of Sand Casting Operations

    NARCIS (Netherlands)

    Hans, Elias W.; van de Velde, S.L.; van de Velde, Steef

    2011-01-01

    We describe a real world case study that involves the monthly planning and scheduling of the sand-casting department in a metal foundry. The problem can be characterised as a single-level multi-item capacitated lot-sizing model with a variety of additional process-specific constraints. The main

  3. Transportation and Production Lot-size for Sugarcane under Uncertainty of Machine Capacity

    Directory of Open Access Journals (Sweden)

    Sudtachat Kanchala

    2018-01-01

    Full Text Available The integrated transportation and production lot size problems is important effect to total cost of operation system for sugar factories. In this research, we formulate a mathematic model that combines these two problems as two stage stochastic programming model. In the first stage, we determine the lot size of transportation problem and allocate a fixed number of vehicles to transport sugarcane to the mill factory. Moreover, we consider an uncertainty of machine (mill capacities. After machine (mill capacities realized, in the second stage we determine the production lot size and make decision to hold units of sugarcane in front of mills based on discrete random variables of machine (mill capacities. We investigate the model using a small size problem. The results show that the optimal solutions try to choose closest fields and lower holding cost per unit (at fields to transport sugarcane to mill factory. We show the results of comparison of our model and the worst case model (full capacity. The results show that our model provides better efficiency than the results of the worst case model.

  4. 75 FR 56558 - Proposed Information Collection Request Submitted for Public Comment and Recommendations; Safety...

    Science.gov (United States)

    2010-09-16

    .... Safety defects found on compressed-air receivers and other unfired pressure vessels have caused injuries....14100, 56/57.13015, 56/57.13030, and 56/57.18002. DATES: All comments must be received by midnight... rule title and may be submitted to MSHA by any of the following methods: (1) Electronic mail: zzMSHA...

  5. Applications of the lots computer code to laser fusion systems and other physical optics problems

    International Nuclear Information System (INIS)

    Lawrence, G.; Wolfe, P.N.

    1979-01-01

    The Laser Optical Train Simulation (LOTS) code has been developed at the Optical Sciences Center, University of Arizona under contract to Los Alamos Scientific Laboratory (LASL). LOTS is a diffraction based code designed to beam quality and energy of the laser fusion system in an end-to-end calculation

  6. Activity Recognition and Localization on a Truck Parking Lot

    NARCIS (Netherlands)

    Andersson, M.; Patino, L.; Burghouts, G.J.; Flizikowski, A.; Evans, M.; Gustafsson, D.; Petersson, H.; Schutte, K.; Ferryman, J.

    2013-01-01

    In this paper we present a set of activity recognition and localization algorithms that together assemble a large amount of information about activities on a parking lot. The aim is to detect and recognize events that may pose a threat to truck drivers and trucks. The algorithms perform zone-based

  7. Green coffee decontamination by electron beam irradiation

    International Nuclear Information System (INIS)

    Nemtanu, Monica R.; Brasoveanu, Mirela; Grecu, Maria Nicoleta; Minea, R.

    2005-01-01

    Microbiological load of green coffee is a real problem considering that it is extremely sensitive to contamination. Irradiation is a decontamination method for a lot of foodstuffs, being a feasible, very effective and environment friendly one. Beans and ground green coffee were irradiated with electron beams up to 40 kGy. Microbial load, rheological behavior, electron paramagnetic resonance (EPR) and visible spectroscopy were carried out. The results show that electron beam irradiation of green coffee could decontaminate it without severe changes in its properties

  8. Mechanics and thermal management of stretchable inorganic electronics.

    Science.gov (United States)

    Song, Jizhou; Feng, Xue; Huang, Yonggang

    2016-03-01

    Stretchable electronics enables lots of novel applications ranging from wearable electronics, curvilinear electronics to bio-integrated therapeutic devices that are not possible through conventional electronics that is rigid and flat in nature. One effective strategy to realize stretchable electronics exploits the design of inorganic semiconductor material in a stretchable format on an elastomeric substrate. In this review, we summarize the advances in mechanics and thermal management of stretchable electronics based on inorganic semiconductor materials. The mechanics and thermal models are very helpful in understanding the underlying physics associated with these systems, and they also provide design guidelines for the development of stretchable inorganic electronics.

  9. Mechanics and thermal management of stretchable inorganic electronics

    Science.gov (United States)

    Song, Jizhou; Feng, Xue; Huang, Yonggang

    2016-01-01

    Stretchable electronics enables lots of novel applications ranging from wearable electronics, curvilinear electronics to bio-integrated therapeutic devices that are not possible through conventional electronics that is rigid and flat in nature. One effective strategy to realize stretchable electronics exploits the design of inorganic semiconductor material in a stretchable format on an elastomeric substrate. In this review, we summarize the advances in mechanics and thermal management of stretchable electronics based on inorganic semiconductor materials. The mechanics and thermal models are very helpful in understanding the underlying physics associated with these systems, and they also provide design guidelines for the development of stretchable inorganic electronics. PMID:27547485

  10. Solving a combined cutting-stock and lot-sizing problem with a column generating procedure

    DEFF Research Database (Denmark)

    Nonås, Sigrid Lise; Thorstenson, Anders

    2008-01-01

    In Nonås and Thorstenson [A combined cutting stock and lot sizing problem. European Journal of Operational Research 120(2) (2000) 327-42] a combined cutting-stock and lot-sizing problem is outlined under static and deterministic conditions. In this paper we suggest a new column generating solutio...... indicate that the procedure works well also for the extended cutting-stock problem with only a setup cost for each pattern change....

  11. Changing the values of parameters on lot size reorder point model

    Directory of Open Access Journals (Sweden)

    Chang Hung-Chi

    2003-01-01

    Full Text Available The Just-In-Time (JIT philosophy has received a great deal of attention. Several actions such as improving quality, reducing setup cost and shortening lead time have been recognized as effective ways to achieve the underlying goal of JIT. This paper considers the partial backorders, lot size reorder point inventory system with an imperfect production process. The objective is to simultaneously optimize the lot size, reorder point, process quality, setup cost and lead time, constrained on a service level. We assume the explicit distributional form of lead time demand is unknown but the mean and standard deviation are given. The minimax distribution free approach is utilized to solve the problem and a numerical example is provided to illustrate the results. .

  12. Brive-la-Gaillarde (Corrèze). Îlot Massénat

    OpenAIRE

    Ollivier, Julien

    2018-01-01

    La fouille archéologique de l’îlot Massénat a été entreprise à l’été 2016, en préalable à la construction de logements et de locaux à vocation commerciale avec parking semi-enterré. Elle a porté sur une surface d’environ 900 m2 et a duré 2 mois avec une équipe de 5 archéologues. Le site, diagnostiqué en 2004 (dir. J. Roger, Inrap), est localisé au sud du Puy Saint-Pierre, où ont été découverts tous les vestiges de l’occupation antique de Brive, encore mal caractérisée. L’îlot est par ailleurs...

  13. New methodology for dynamic lot dispatching

    Science.gov (United States)

    Tai, Wei-Herng; Wang, Jiann-Kwang; Lin, Kuo-Cheng; Hsu, Yi-Chin

    1994-09-01

    This paper presents a new dynamic dispatching rule to improve delivery. The dynamic dispatching rule named `SLACK and OTD (on time delivery)' is developed for focusing on due date and target cycle time under the environment of IC manufacturing. This idea uses traditional SLACK policy to control long term due date and new OTD policy to reflect the short term stage queue time. Through the fuzzy theory, these two policies are combined as the dispatching controller to define the lot priority in the entire production line. Besides, the system would automatically update the lot priority according to the current line situation. Since the wafer dispatching used to be controlled by critical ratio that indicates the low customer satisfaction. And the overall slack time in the front end of the process is greater compared to that in the rear end of the process which reveals that the machines in the rear end are overloaded by rush orders. When SLACK and OTD are used the due date control has been gradually improved. The wafer with either a long stage queue time or urgent due date will be pushed through the overall production line instead of jammed in the front end. A demand pull system is also developed to satisfy not only due date but also the quantity of monthly demand. The SLACK and OTD rule has been implemented in Taiwan Semiconductor Manufacturing Company for eight months with beneficial results. In order to clearly monitor the SLACK and OTD policy, a method called box chart is generated to simulate the entire production system. From the box chart, we can not only monitor the result of decision policy but display the production situation on the density figure. The production cycle time and delivery situation can also be investigated.

  14. Multidrug resistance among new tuberculosis cases: detecting local variation through lot quality-assurance sampling.

    Science.gov (United States)

    Hedt, Bethany Lynn; van Leth, Frank; Zignol, Matteo; Cobelens, Frank; van Gemert, Wayne; Nhung, Nguyen Viet; Lyepshina, Svitlana; Egwaga, Saidi; Cohen, Ted

    2012-03-01

    Current methodology for multidrug-resistant tuberculosis (MDR TB) surveys endorsed by the World Health Organization provides estimates of MDR TB prevalence among new cases at the national level. On the aggregate, local variation in the burden of MDR TB may be masked. This paper investigates the utility of applying lot quality-assurance sampling to identify geographic heterogeneity in the proportion of new cases with multidrug resistance. We simulated the performance of lot quality-assurance sampling by applying these classification-based approaches to data collected in the most recent TB drug-resistance surveys in Ukraine, Vietnam, and Tanzania. We explored 3 classification systems- two-way static, three-way static, and three-way truncated sequential sampling-at 2 sets of thresholds: low MDR TB = 2%, high MDR TB = 10%, and low MDR TB = 5%, high MDR TB = 20%. The lot quality-assurance sampling systems identified local variability in the prevalence of multidrug resistance in both high-resistance (Ukraine) and low-resistance settings (Vietnam). In Tanzania, prevalence was uniformly low, and the lot quality-assurance sampling approach did not reveal variability. The three-way classification systems provide additional information, but sample sizes may not be obtainable in some settings. New rapid drug-sensitivity testing methods may allow truncated sequential sampling designs and early stopping within static designs, producing even greater efficiency gains. Lot quality-assurance sampling study designs may offer an efficient approach for collecting critical information on local variability in the burden of multidrug-resistant TB. Before this methodology is adopted, programs must determine appropriate classification thresholds, the most useful classification system, and appropriate weighting if unbiased national estimates are also desired.

  15. Flexible interaction of plug-in electric vehicle parking lots for efficient wind integration

    International Nuclear Information System (INIS)

    Heydarian-Forushani, E.; Golshan, M.E.H.; Shafie-khah, M.

    2016-01-01

    Highlights: • Interactive incorporation of plug-in electric vehicle parking lots is investigated. • Flexible energy and reserve services are provided by electric vehicle parking lots. • Uncertain characterization of electric vehicle owners’ behavior is taken into account. • Coordinated operation of parking lots can facilitate wind power integration. - Abstract: The increasing share of uncertain wind generation has changed traditional operation scheduling of power systems. The challenges of this additional variability raise the need for an operational flexibility in providing both energy and reserve. One key solution is an effective incorporation of plug-in electric vehicles (PEVs) into the power system operation process. To this end, this paper proposes a two-stage stochastic programming market-clearing model considering the network constraints to achieve the optimal scheduling of conventional units as well as PEV parking lots (PLs) in providing both energy and reserve services. Different from existing works, the paper pays more attention to the uncertain characterization of PLs takes into account the arrival/departure time of PEVs to/from the PL, the initial state of charge (SOC) of PEVs, and their battery capacity through a set of scenarios in addition to wind generation scenarios. The results reveal that although the cost saving as a consequence of incorporating PL to the grid is below 1% of total system cost, however, flexible interactions of PL in the energy and reserve markets can promote the integration of wind power more than 13.5%.

  16. What is a printed textbook?: electronic books at the university teaching and learning

    Directory of Open Access Journals (Sweden)

    Helena Pečko-Mlekuš

    2001-01-01

    Full Text Available The article tries to answer the question whether electronic texbooks will support the teaching and learning process at the university in the future and the way they will inflluence academic libraries' collections and services. The answer to the first part of the question is affirmative. A lot of publishers offer access to electronic textbooks, hardware and software equipment and their number is even increasing. However, there are a lot of problems to solve, lack of standardisation being one of them. University publishers have not responded to the changing environment in time and that is why commercial firms took the initiative. Libraries do not represent an adequate market for them and are mostly oriented towards individual users as well. There are a lot of ongoing studies and pilot projects in the United States of America and the United Kingdom trying to find the best solutions for the existing problems. At the end, some possible tasks and challenges for academic libraries are presented.

  17. The 'Thinking a Lot' Idiom of Distress and PTSD: An Examination of Their Relationship among Traumatized Cambodian Refugees Using the 'Thinking a Lot' Questionnaire

    NARCIS (Netherlands)

    Hinton, D.E.; Reis, R.; de Jong, J.

    2015-01-01

    "Thinking a lot" (TAL)—also referred to as "thinking too much"—is a key complaint in many cultural contexts, and the current article profiles this idiom of distress among Cambodian refugees. The article also proposes a general model of how TAL generates various types of distress that then cause

  18. An improved hierarchical A * algorithm in the optimization of parking lots

    Science.gov (United States)

    Wang, Yong; Wu, Junjuan; Wang, Ying

    2017-08-01

    In the parking lot parking path optimization, the traditional evaluation index is the shortest distance as the best index and it does not consider the actual road conditions. Now, the introduction of a more practical evaluation index can not only simplify the hardware design of the boot system but also save the software overhead. Firstly, we establish the parking lot network graph RPCDV mathematical model and all nodes in the network is divided into two layers which were constructed using different evaluation function base on the improved hierarchical A * algorithm which improves the time optimal path search efficiency and search precision of the evaluation index. The final results show that for different sections of the program attribute parameter algorithm always faster the time to find the optimal path.

  19. 9 CFR 351.19 - Refusal of certification for specific lots.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Refusal of certification for specific lots. 351.19 Section 351.19 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION...

  20. 76 FR 9024 - Agency Information Collection Activities; Proposed Collection; Comment Request; Electronic...

    Science.gov (United States)

    2011-02-16

    ...] Agency Information Collection Activities; Proposed Collection; Comment Request; Electronic Records; Electronic Signatures AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug... relating to FDA's electronic records and electronic signatures. DATES: Submit either electronic or written...

  1. Immune responses to a recombinant, four-component, meningococcal serogroup B vaccine (4CMenB) in adolescents: a phase III, randomized, multicentre, lot-to-lot consistency study.

    Science.gov (United States)

    Perrett, Kirsten P; McVernon, Jodie; Richmond, Peter C; Marshall, Helen; Nissen, Michael; August, Allison; Percell, Sandra; Toneatto, Daniela; Nolan, Terry

    2015-09-22

    For decades, a broadly effective vaccine against serogroup B Neisseria meningitidis (MenB) has remained elusive. Recently, a four-component recombinant vaccine (4CMenB) has been developed and is now approved in Europe, Canada, Australia and some Latin American countries. This phase III, randomized study evaluated the lot consistency, early immune responses and the safety profile of 4CMenB in 11 to 17-year-old adolescents in Australia and Canada (NCT01423084). In total, 344 adolescents received two doses of one of 2 lots of 4CMenB, 1-month apart. Immunogenicity was assessed before, 2-weeks and 1-month following the second vaccination. Serum bactericidal activity using human complement (hSBA) was measured against three reference strains 44/76-SL, 5/99 and NZ98/254, selected to express one of the vaccine antigens; Neisseria adhesin A (NadA), factor H binding protein (fHbp) and porin A (PorA) containing outer membrane vesicle (OMV), respectively. Responses to the Neisseria heparin binding antigen (NHBA) were assessed with enzyme linked immunosorbent assay (ELISA). Local and systemic reactions were recorded for 7 days following each vaccination; unsolicited adverse events were monitored throughout the study. Immunological equivalence of the two lots of 4CMenB was established at 1-month. At baseline, ≤7% of participants had hSBA titers ≥5 to all three reference strains. Two weeks following the second dose of 4CMenB, all participants had hSBA titers ≥5 against fHbp and NadA compared with 84-96% against the PorA reference strains. At 1-month, corresponding proportions were 99%, 100% and 70-79%, respectively. Both lots were generally well tolerated and had similar adverse event profiles. Two doses of 4CMenB had an acceptable safety profile and induced a robust immune response in adolescents. Peak antibody responses were observed at 14 days following vaccination. While a substantial non-uniform antigen-dependent early decline in antibody titers was seen thereafter, a

  2. A hybrid adaptive large neighborhood search algorithm applied to a lot-sizing problem

    DEFF Research Database (Denmark)

    Muller, Laurent Flindt; Spoorendonk, Simon

    This paper presents a hybrid of a general heuristic framework that has been successfully applied to vehicle routing problems and a general purpose MIP solver. The framework uses local search and an adaptive procedure which choses between a set of large neighborhoods to be searched. A mixed integer...... of a solution and to investigate the feasibility of elements in such a neighborhood. The hybrid heuristic framework is applied to the multi-item capacitated lot sizing problem with dynamic lot sizes, where experiments have been conducted on a series of instances from the literature. On average the heuristic...

  3. 75 FR 14445 - Guidance for Industry on Submitting a Report for Multiple Facilities to the Reportable Food...

    Science.gov (United States)

    2010-03-25

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2009-D-0260] Guidance for Industry on Submitting a Report for Multiple Facilities to the Reportable Food Electronic... Act of 2007.'' The document provides guidance to the industry in complying with the Reportable Food...

  4. 78 FR 52860 - Electronic Reporting of Toxics Release Inventory Data

    Science.gov (United States)

    2013-08-27

    ... only exception to this electronic reporting requirement is for the few facilities that submit trade... rulemaking process later to require the electronic reporting of trade secrets. The EPA recognizes the... Electronic Reporting of Toxics Release Inventory Data AGENCY: Environmental Protection Agency (EPA). ACTION...

  5. Comparison of Firefly algorithm and Artificial Immune System algorithm for lot streaming in -machine flow shop scheduling

    Directory of Open Access Journals (Sweden)

    G. Vijay Chakaravarthy

    2012-11-01

    Full Text Available Lot streaming is a technique used to split the processing of lots into several sublots (transfer batches to allow the overlapping of operations in a multistage manufacturing systems thereby shortening the production time (makespan. The objective of this paper is to minimize the makespan and total flow time of -job, -machine lot streaming problem in a flow shop with equal and variable size sublots and also to determine the optimal sublot size. In recent times researchers are concentrating and applying intelligent heuristics to solve flow shop problems with lot streaming. In this research, Firefly Algorithm (FA and Artificial Immune System (AIS algorithms are used to solve the problem. The results obtained by the proposed algorithms are also compared with the performance of other worked out traditional heuristics. The computational results shows that the identified algorithms are more efficient, effective and better than the algorithms already tested for this problem.

  6. Carbon dioxide and methane emissions from the scale model of open dairy lots.

    Science.gov (United States)

    Ding, Luyu; Cao, Wei; Shi, Zhengxiang; Li, Baoming; Wang, Chaoyuan; Zhang, Guoqiang; Kristensen, Simon

    2016-07-01

    To investigate the impacts of major factors on carbon loss via gaseous emissions, carbon dioxide (CO2) and methane (CH4) emissions from the ground of open dairy lots were tested by a scale model experiment at various air temperatures (15, 25, and 35 °C), surface velocities (0.4, 0.7, 1.0, and 1.2 m sec(-1)), and floor types (unpaved soil floor and brick-paved floor) in controlled laboratory conditions using the wind tunnel method. Generally, CO2 and CH4 emissions were significantly enhanced with the increase of air temperature and velocity (P emissions, which were also affected by air temperature and soil characteristics of the floor. Although different patterns were observed on CH4 emission from the soil and brick floors at different air temperature-velocity combinations, statistical analysis showed no significant difference in CH4 emissions from different floors (P > 0.05). For CO2, similar emissions were found from the soil and brick floors at 15 and 25 °C, whereas higher rates were detected from the brick floor at 35 °C (P emission from the scale model was exponentially related to CO2 flux, which might be helpful in CH4 emission estimation from manure management. Gaseous emissions from the open lots are largely dependent on outdoor climate, floor systems, and management practices, which are quite different from those indoors. This study assessed the effects of floor types and air velocities on CO2 and CH4 emissions from the open dairy lots at various temperatures by a wind tunnel. It provided some valuable information for decision-making and further studies on gaseous emissions from open lots.

  7. Electronic publishing of SPE papers

    International Nuclear Information System (INIS)

    Perdue, J.M.

    1992-01-01

    This paper reports that the SPE is creating an electronic index to over 25,000 technical papers and will produce a CD-ROM as an initial product. This SPE CD-ROM Masterdisc will be available at the SPE Annual Meeting in Washington, D.C. on October 4-7, 1992. The SPE Board has appointed an Ad Hoc Committee on Electronic Publishing to coordinate and oversee this project and to recommend authoring standards for submitting SPE papers electronically in the future

  8. [Occupational health status of electronics manufacturing female employees in China].

    Science.gov (United States)

    Wei, T T; Mei, L Y

    2018-02-06

    Electronics industry is a typical labor-intensive industry in China. There are a lot of female workers and various occupational hazard factors in the workplace. This article reviewed the characteristics of employment of women in electronics industry, occupational hazards of exposure, protective measures, occupational disease situation, influence of reproductive health and mental health, and occupational health management. Electronics female emplyees have the priority in reproductive health and mental health. Besides, this group has poor protective measures, occupational health management and policy should be taken to enhance the level of women health in electronics industry.

  9. Electron cloud effects in hadron beams

    Energy Technology Data Exchange (ETDEWEB)

    Petrov, Fedor; Boine-Frankenheim, Oliver; Weiland, Thomas [TU-Darmstadt, Institut fuer Theorie Elektromagnetischer Felder,Schlossgartenstr. 8 64289 Darmstadt (Germany)

    2013-07-01

    Accelerators operating with intense positively charged beams can suffer from the electron cloud phenomenon. For example, it is the intensity limiting factor in CERN LHC and SPS. In past decades a lot of progress in understanding the electron cloud effects was made worldwide. Methods to suppress or weaken the electron cloud phenomenon were proposed. Theories governing the bunch stability in presence of the electron cloud were developed. Recently the theory was introduced to describe the bunch energy loss due to the electron cloud. However, most of the publications concern the single bunch electron cloud effects. In reality bunches are packed into trains. A disturbance of the cloud caused by the bunch in the beginning of the train affects the subsequent bunches. We present a further investigation of single-bunch electron cloud effects and planned activities to study the phenomenon in case of multiple bunches.

  10. 48 CFR 14.406 - Receipt of an unreadable electronic bid.

    Science.gov (United States)

    2010-10-01

    ... an unreadable electronic bid. If a bid received at the Government facility by electronic data... electronic bid. 14.406 Section 14.406 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION... bid as originally submitted; and (b) That the unreadable condition of the bid was caused by Government...

  11. Study of poli (ethylene tereftalate) thin films submitted to radiations by using permeation and spectroscopic techniques

    International Nuclear Information System (INIS)

    Andrade, L.A.

    1986-06-01

    Properties of poly (ethylene terephthalate P.E.T. thin films submitted to electric discharges, electron, He + ion and proton beams were investigated using permeation technique, electronic paramagnetic resonance resonance (E.P.R.) and visible and infrared spectroscopies. Experimental apparatuses and procedures are described and the results of the analyses are presented and discussed. The existence of structural modifications in irradiated P.E.T. thin films is confirmed. It is shown that the kind of effects occuring in irradiated P.E.T. depends on the nature of the incident radiation. (author) [pt

  12. Solving portfolio selection problems with minimum transaction lots based on conditional-value-at-risk

    Science.gov (United States)

    Setiawan, E. P.; Rosadi, D.

    2017-01-01

    Portfolio selection problems conventionally means ‘minimizing the risk, given the certain level of returns’ from some financial assets. This problem is frequently solved with quadratic or linear programming methods, depending on the risk measure that used in the objective function. However, the solutions obtained by these method are in real numbers, which may give some problem in real application because each asset usually has its minimum transaction lots. In the classical approach considering minimum transaction lots were developed based on linear Mean Absolute Deviation (MAD), variance (like Markowitz’s model), and semi-variance as risk measure. In this paper we investigated the portfolio selection methods with minimum transaction lots with conditional value at risk (CVaR) as risk measure. The mean-CVaR methodology only involves the part of the tail of the distribution that contributed to high losses. This approach looks better when we work with non-symmetric return probability distribution. Solution of this method can be found with Genetic Algorithm (GA) methods. We provide real examples using stocks from Indonesia stocks market.

  13. Intelligent workflow driven processing for electronic mail management

    African Journals Online (AJOL)

    Email has become one of the most efficient means of electronics communication for many years and email management has become a critical issue due to congestion. Different client/individuals encounter problems while processing their emails due to large volume of email being received and lot of request to be replied.

  14. Thermohydraulic behavior of liquid metal pool submitted to electronic bombardment

    International Nuclear Information System (INIS)

    Brun, Patrice

    1998-01-01

    This thesis deals with the thermohydraulics of liquid metal molten by an electron beam. We study the relationship between the liquid metal pool and the vapor rate. The aim is to find good conditions increasing the metal vapor rate. In first place, energy losses are identified. Mains are convection (buoyancy and thermo-capillary) strengthen by the deformation of the molten pool. The first action is to reduce the liquid interface deformation with a transient spot realized by scanning the electron beam. I find that in this case, the optimum vapor rate is obtained when the crossing time of the beam is smaller than characteristic time of formation of the cavity, but greater than the heating time of the surface. Secondly, I impose forces to change the morphology of the flow. Two actions are tried: magnetic field application and rotating motion of the crucible. External magnetic field application may reduce convective flow, by the creation of a magnetic brake. But in my experiment, magnetic field deteriorates electron beam before to be effective. Results obtained by the rotating motion of the crucible approve this choice to reduce energy losses and increase vapor rate. This growth of vapor rate is due to an expansion of the emitted vapor source and an increase of the central temperature of the molten pool. Nevertheless with the increase of the rotation velocity and after the optimum vapor rate, I note that the flow is not axisymmetric. My observation give to think about instabilities that are developed by baroclinic waves. The comparison of my works with the Eady's linear theory gives good results. (author) [fr

  15. Water in the Balance: A Parking Lot Story

    Science.gov (United States)

    Haas, N. A.; Vitousek, S.

    2017-12-01

    The greater Chicagoland region has seen a high degree of urbanization since 1970. For example, between 1970-1990 the region experienced 4% population growth, a 35% increase in urban land use, and approximately 454 square miles of agricultural land was mostly converted into urban uses. Transformation of land into urban uses in the Chicagoland region has altered the stream and catchment response to rainfall events, specifically an increase in stream flashiness and increase in urban flooding. Chicago has begun to address these changes through green infrastructure. To understand the impact of green infrastructure at local, city-wide, and watershed scales, individual projects need to be accurately and sufficiently modeled. A traditional parking lot conversion into a porous parking lot at the University of Illinois at Chicago was modeled using SWMM and scrutinized using field data to look at stormwater runoff and water balance prior and post reconstruction. SWMM modeling suggested an 87% reduction in peak flow as well as a 100% reduction in flooding for a 24 hour, 1.72-inch storm. For the same storm, field data suggest an 89% reduction in peak flow as well as a 100% reduction in flooding. Modeling suggested 100% reductions in flooding for longer duration storms (24 hour+) and a smaller reduction in peak flow ( 66%). The highly parameterized SWMM model agrees well with collected data and analysis. Further effort is being made to use data mining to create correlations within the collected datasets that can be integrated into a model that follows a standardized formation process and reduces parameterization.

  16. 7 CFR 56.37 - Lot marking of officially identified shell eggs.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Lot marking of officially identified shell eggs. 56.37... AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) VOLUNTARY GRADING OF SHELL EGGS Grading of Shell Eggs Identifying and Marking Products § 56.37...

  17. Simultaneous Optimal Placement of Distributed Generation and Electric Vehicle Parking Lots Based on Probabilistic EV Model

    OpenAIRE

    M.H. Amini; M. Parsa Moghaddam

    2013-01-01

    High penetration of distributed generations and the increasing demand for using electric vehicles provide a lot of issues for the utilities. If these two effective elements of the future power system are used in an unscheduled manner, it may lead to the loss increment in distribution networks, dramatically. In this paper, the simultaneous allocation of distributed generations (DGs) and electric vehicles (EVs) parking lots has been studied in a radial distribution network. A distribution netwo...

  18. AD620SQ/883B Total Ionizing Dose Radiation Lot Acceptance Report for RESTORE-LEO

    Science.gov (United States)

    Burton, Noah; Campola, Michael

    2017-01-01

    A Radiation Lot Acceptance Test was performed on the AD620SQ/883B, Lot 1708D, in accordance with MIL-STD-883, Method 1019, Condition D. Using a Co-60 source 4 biased parts and 4 unbiased parts were irradiated at 10 mrad/s (0.036 krad/hr) in intervals of approximately 1 krad from 3-10 krads, and ones of 5 krads from 10-25 krads, where it was annealed while unbiased at 25 degrees Celsius, for 2 days, and then, subsequently, annealed while biased at 25 degrees celsius, for another 7 days.

  19. Why gerontology and geriatrics can teach us a lot about mentoring.

    Science.gov (United States)

    Clark, Phillip G

    2018-05-15

    Gerontology, geriatrics, and mentoring have a lot in common. The prototype of this role was Mentor, an older adult in Homer's The Odyssey, who was enlisted to look after Odysseus' son, Telemachus, while his father was away fighting the Trojan War. Portrayed as an older man, the name "mentor" literally means "a man who thinks," which is not a bad characterization generally for faculty members in gerontology! In particular, gerontological and geriatrics education can teach us a lot about the importance of mentoring and provide some critical insights into this role: (1) the importance of interprofessional leadership and modeling, (2) the application of the concept of "grand-generativity" to mentoring, (3) "it takes a community" to be effective in mentoring others, and (4) the need to tailor mentorship styles to the person and the situation. This discussion explores these topics and argues that gerontological and geriatrics educators have a particularly important role and responsibility in mentoring students, colleagues, and administrators related to the very future of our field.

  20. Extending cluster Lot Quality Assurance Sampling designs for surveillance programs

    OpenAIRE

    Hund, Lauren; Pagano, Marcello

    2014-01-01

    Lot quality assurance sampling (LQAS) has a long history of applications in industrial quality control. LQAS is frequently used for rapid surveillance in global health settings, with areas classified as poor or acceptable performance based on the binary classification of an indicator. Historically, LQAS surveys have relied on simple random samples from the population; however, implementing two-stage cluster designs for surveillance sampling is often more cost-effective than ...

  1. Three Permeable Pavements Performances for Priority Metal Pollutants and Metals Associated with Deicing Chemicals from Edison Parking Lot, NJ

    Science.gov (United States)

    The U.S. Environmental Protection Agency constructed a 4000-m2 parking lot in Edison, New Jersey in 2009. The parking lot is surfaced with three permeable pavements [permeable interlocking concrete pavers (PICP), pervious concrete (PC), and porous asphalt (PA)]. Samples of each p...

  2. Egg and a lot of science: an interdisciplinary experiment

    OpenAIRE

    Gayer, M. C.; Interdisciplinary Research Group on Teaching Practice, Graduate Program in Biochemistry, Unipampa, RS, Brazil Laboratory of Physicochemical Studies and Natural Products, Post Graduate Program in Biochemistry, Unipampa, RS, Brazil; T., Rodrigues D.; Interdisciplinary Research Group on Teaching Practice, Graduate Program in Biochemistry, Unipampa, RS, Brazil Laboratory of Physicochemical Studies and Natural Products, Post Graduate Program in Biochemistry, Unipampa, RS, Brazil; Denardin, E. L.G.; Laboratory of Physicochemical Studies and Natural Products, Post Graduate Program in Biochemistry, Unipampa, RS, Brazil; Roehrs, R.; Interdisciplinary Research Group on Teaching Practice, Graduate Program in Biochemistry, Unipampa, RS, Brazil Laboratory of Physicochemical Studies and Natural Products, Post Graduate Program in Biochemistry, Unipampa, RS, Brazil

    2014-01-01

    Egg and a lot of science: an interdisciplinary experimentGayer, M.C.1,2;Rodrigues, D.T.1,2; Escoto, D.F.1; Denardin, E.L.G.2, Roehrs, R.1,21Interdisciplinary Research Group on Teaching Practice, Graduate Program in Biochemistry, Unipampa, RS, Brazil2Laboratory of Physicochemical Studies and Natural Products, Post Graduate Program in Biochemistry, Unipampa, RS, BrazilIntroduction: How to tell if an egg is rotten? How to calculate the volume of an egg? Because the rotten egg float? Why has this...

  3. 77 FR 23204 - VA Acquisition Regulation: Electronic Submission of Payment Requests

    Science.gov (United States)

    2012-04-18

    ... choose to use electronic invoicing have three options to submit payment requests in electronic form: (1... (``Act''), Public Law 97-177, to require Federal agencies to pay their bills on a timely basis, to pay... reflect the increased use of electronic commerce in the Federal Government and in the private sector...

  4. Transient Exciplex Formation Electron Transfer Mechanism

    Directory of Open Access Journals (Sweden)

    Michael G. Kuzmin

    2011-01-01

    Full Text Available Transient exciplex formation mechanism of excited-state electron transfer reactions is analyzed in terms of experimental data on thermodynamics and kinetics of exciplex formation and decay. Experimental profiles of free energy, enthalpy, and entropy for transient exciplex formation and decay are considered for several electron transfer reactions in various solvents. Strong electronic coupling in contact pairs of reactants causes substantial decrease of activation energy relative to that for conventional long-range ET mechanism, especially for endergonic reactions, and provides the possibility for medium reorganization concatenated to gradual charge shift in contrast to conventional preliminary medium and reactants reorganization. Experimental criteria for transient exciplex formation (concatenated mechanism of excited-state electron transfer are considered. Available experimental data show that this mechanism dominates for endergonic ET reactions and provides a natural explanation for a lot of known paradoxes of ET reactions.

  5. A multi-phase algorithm for a joint lot-sizing and pricing problem with stochastic demands

    DEFF Research Database (Denmark)

    Jenny Li, Hongyan; Thorstenson, Anders

    2014-01-01

    to a practically viable approach to decision-making. In addition to incorporating market uncertainty and pricing decisions in the traditional production and inventory planning process, our approach also accommodates the complexity of time-varying cost and capacity constraints. Finally, our numerical results show......Stochastic lot-sizing problems have been addressed quite extensively, but relatively few studies also consider marketing factors, such as pricing. In this paper, we address a joint stochastic lot-sizing and pricing problem with capacity constraints and backlogging for a firm that produces a single...... that the multi-phase heuristic algorithm solves the example problems effectively....

  6. 27 CFR 73.33 - Am I legally bound by a form I sign electronically?

    Science.gov (United States)

    2010-04-01

    ... TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Filing of Documents with TTB § 73.33 Am I legally bound... paper document submitted to satisfy the same reporting requirement. Persons using electronic signatures...

  7. Sequencing, lot sizing and scheduling in job shops: the common cycle approach

    NARCIS (Netherlands)

    Ouenniche, J.; Boctor, F.F.

    1998-01-01

    This paper deals with the multi-product, finite horizon, static demand, sequencing, lot sizing and scheduling problem in a job shop environment where the objective is to minimize the sum of setup and inventory holding costs while satisfying the demand with no backlogging. To solve this problem, we

  8. Aligning workload control theory and practice : lot splitting and operation overlapping issues

    NARCIS (Netherlands)

    Fernandes, Nuno O.; Land, Martin J.; Carmo-Silva, S.

    2016-01-01

    This paper addresses the problem of lot splitting in the context of workload control (WLC). Past studies on WLC assumed that jobs released to the shop floor proceed through the different stages of processing without being split. However, in practice, large jobs are often split into smaller transfer

  9. Performance of engineered soil and trees in a parking lot bioswale

    Science.gov (United States)

    Qingfu Xiao; Gregory McPherson

    2011-01-01

    A bioswale integrating an engineered soil and trees was installed in a parking lot to evaluate its ability to reduce storm runoff, pollutant loading, and support tree growth. The adjacent control and treatment sites each received runoff from eight parking spaces and were identical except that there was no bioswale for the control site. A tree was planted at both sites...

  10. Transition to electronic publishing

    Science.gov (United States)

    Bowning, Sam

    Previous communications have described some of the many changes that will occur in the next few months as AGU makes the transition to fully electronic publishing. With the advent of the new AGU electronic publishing system, manuscripts will be submitted, edited, reviewed, and published in electronic formats. This piece discusses how the electronic journals will differ from the print journals. Electronic publishing will require some adjustments to the ways we currently think about journals from our perspective of standard print versions. Visiting the Web site of AGU's Geochemistry, Geophysics, Geosystems (G-Cubed) is a great way to get familiar with the look and feel of electronic publishing. However, protocols, especially for citations of articles, are still evolving. Some of the biggest changes for users of AGU publications may be the lack of page numbers, the use of a unique identifier (DOI),and changes in citation style.

  11. Cluster-sample surveys and lot quality assurance sampling to evaluate yellow fever immunisation coverage following a national campaign, Bolivia, 2007.

    Science.gov (United States)

    Pezzoli, Lorenzo; Pineda, Silvia; Halkyer, Percy; Crespo, Gladys; Andrews, Nick; Ronveaux, Olivier

    2009-03-01

    To estimate the yellow fever (YF) vaccine coverage for the endemic and non-endemic areas of Bolivia and to determine whether selected districts had acceptable levels of coverage (>70%). We conducted two surveys of 600 individuals (25 x 12 clusters) to estimate coverage in the endemic and non-endemic areas. We assessed 11 districts using lot quality assurance sampling (LQAS). The lot (district) sample was 35 individuals with six as decision value (alpha error 6% if true coverage 70%; beta error 6% if true coverage 90%). To increase feasibility, we divided the lots into five clusters of seven individuals; to investigate the effect of clustering, we calculated alpha and beta by conducting simulations where each cluster's true coverage was sampled from a normal distribution with a mean of 70% or 90% and standard deviations of 5% or 10%. Estimated coverage was 84.3% (95% CI: 78.9-89.7) in endemic areas, 86.8% (82.5-91.0) in non-endemic and 86.0% (82.8-89.1) nationally. LQAS showed that four lots had unacceptable coverage levels. In six lots, results were inconsistent with the estimated administrative coverage. The simulations suggested that the effect of clustering the lots is unlikely to have significantly increased the risk of making incorrect accept/reject decisions. Estimated YF coverage was high. Discrepancies between administrative coverage and LQAS results may be due to incorrect population data. Even allowing for clustering in LQAS, the statistical errors would remain low. Catch-up campaigns are recommended in districts with unacceptable coverage.

  12. Analysis of portfolio optimization with lot of stocks amount constraint: case study index LQ45

    Science.gov (United States)

    Chin, Liem; Chendra, Erwinna; Sukmana, Agus

    2018-01-01

    To form an optimum portfolio (in the sense of minimizing risk and / or maximizing return), the commonly used model is the mean-variance model of Markowitz. However, there is no amount of lots of stocks constraint. And, retail investors in Indonesia cannot do short selling. So, in this study we will develop an existing model by adding an amount of lot of stocks and short-selling constraints to get the minimum risk of portfolio with and without any target return. We will analyse the stocks listed in the LQ45 index based on the stock market capitalization. To perform this analysis, we will use Solver that available in Microsoft Excel.

  13. Three Permeable Pavements Performances for Priority Metal Pollutants and Metals associated with Deicing Chemicals from Edison Parking Lot, NJ - abstract

    Science.gov (United States)

    The U.S. Environmental Protection Agency constructed a 4000-m2 parking lot in Edison, New Jersey in 2009. The parking lot is surfaced with three permeable pavements [permeable interlocking concrete pavers (PICP), pervious concrete (PC), and porous asphalt (PA)]. Samples of each p...

  14. Clustered lot quality assurance sampling to assess immunisation coverage: increasing rapidity and maintaining precision.

    Science.gov (United States)

    Pezzoli, Lorenzo; Andrews, Nick; Ronveaux, Olivier

    2010-05-01

    Vaccination programmes targeting disease elimination aim to achieve very high coverage levels (e.g. 95%). We calculated the precision of different clustered lot quality assurance sampling (LQAS) designs in computer-simulated surveys to provide local health officers in the field with preset LQAS plans to simply and rapidly assess programmes with high coverage targets. We calculated sample size (N), decision value (d) and misclassification errors (alpha and beta) of several LQAS plans by running 10 000 simulations. We kept the upper coverage threshold (UT) at 90% or 95% and decreased the lower threshold (LT) progressively by 5%. We measured the proportion of simulations with d unvaccinated individuals if the coverage was LT% (pLT) to calculate alpha (1-pLT). We divided N in clusters (between 5 and 10) and recalculated the errors hypothesising that the coverage would vary in the clusters according to a binomial distribution with preset standard deviations of 0.05 and 0.1 from the mean lot coverage. We selected the plans fulfilling these criteria: alpha LQAS plans dividing the lot in five clusters with N = 50 (5 x 10) and d = 4 to evaluate programmes with 95% coverage target and d = 7 to evaluate programmes with 90% target. These plans will considerably increase the feasibility and the rapidity of conducting the LQAS in the field.

  15. Rapid assessment of antimicrobial resistance prevalence using a Lot Quality Assurance sampling approach

    NARCIS (Netherlands)

    van Leth, Frank; den Heijer, Casper; Beerepoot, Marielle; Stobberingh, Ellen; Geerlings, Suzanne; Schultsz, Constance

    2017-01-01

    Increasing antimicrobial resistance (AMR) requires rapid surveillance tools, such as Lot Quality Assurance Sampling (LQAS). LQAS classifies AMR as high or low based on set parameters. We compared classifications with the underlying true AMR prevalence using data on 1335 Escherichia coli isolates

  16. A lot to look forward to

    CERN Multimedia

    2013-01-01

    CERN moves from momentous year to momentous year, and although 2013 will be very different for us than 2012, there is still a lot to look forward to. As I write, the proton-lead run is just getting under way, giving the LHC experiments a new kind of data to investigate. But the run will be short, and our main activity this year will be the start of the LHC’s first long shutdown.   This is the first year I can remember in which all of CERN’s accelerators will be off. The reason is that there is much to be done: the older machines need maintenance, and the LHC has to be prepared for higher energy running. That involves opening up the interconnections between each of the machine’s 1,695 main magnet cryostats, consolidating all of the 10,170 splices carrying current to the main dipole and quadrupole windings, and a range of other work to improve the machine. The CERN accelerator complex will start to come back to life in 2014, and it’s fair to say that when...

  17. Perception that "everything requires a lot of effort": transcultural SCL-25 item validation.

    Science.gov (United States)

    Moreau, Nicolas; Hassan, Ghayda; Rousseau, Cécile; Chenguiti, Khalid

    2009-09-01

    This brief report illustrates how the migration context can affect specific item validity of mental health measures. The SCL-25 was administered to 432 recently settled immigrants (220 Haitian and 212 Arabs). We performed descriptive analyses, as well as Infit and Outfit statistics analyses using WINSTEPS Rasch Measurement Software based on Item Response Theory. The participants' comments about the item You feel everything requires a lot of effort in the SCL-25 were also qualitatively analyzed. Results revealed that the item You feel everything requires a lot of effort is an outlier and does not adjust in an expected and valid fashion with its cluster items, as it is over-endorsed by Haitian and Arab healthy participants. Our study thus shows that, in transcultural mental health research, the cultural and migratory contexts may interact and significantly influence the meaning of some symptom items and consequently, the validity of symptom scales.

  18. A review of lot streaming in a flow shop environment with makespan criteria

    Directory of Open Access Journals (Sweden)

    Pedro Gómez-Gasquet

    2013-07-01

    Full Text Available Purpose: This paper reviews current literature and contributes a set of findings that capture the current state-of-the-art of the topic of lot streaming in a flow-shop. Design/methodology/approach: A literature review to capture, classify and summarize the main body of knowledge on lot streaming in a flow-shop with makespan criteria and, translate this into a form that is readily accessible to researchers and practitioners in the more mainstream production scheduling community. Findings and Originality/value: The existing knowledge base is somewhat fragmented. This is a relatively unexplored topic within mainstream operations management research and one which could provide rich opportunities for further exploration. Originality/value: This paper sets out to review current literature, from an advanced production scheduling perspective, and contributes a set of findings that capture the current state-of-the-art of this topic.

  19. 12 CFR 516.110 - Who may submit a written comment?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Who may submit a written comment? 516.110 Section 516.110 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY APPLICATION PROCESSING PROCEDURES Comment Procedures § 516.110 Who may submit a written comment? Any person may submit a...

  20. Meta-Heuristics for Dynamic Lot Sizing: a review and comparison of solution approaches

    NARCIS (Netherlands)

    R.F. Jans (Raf); Z. Degraeve (Zeger)

    2004-01-01

    textabstractProofs from complexity theory as well as computational experiments indicate that most lot sizing problems are hard to solve. Because these problems are so difficult, various solution techniques have been proposed to solve them. In the past decade, meta-heuristics such as tabu search,

  1. Detection and genetic identification of pestiviruses in Brazilian lots of fetal bovine serum collected from 2006 to 2014

    Directory of Open Access Journals (Sweden)

    Francielle L. Monteiro

    Full Text Available ABSTRACT: The present study performed a genetic identification of pestiviruses contaminating batches of fetal bovine serum (FBS produced in Brazil from 2006 to 2014. Seventy-three FBS lots were screened by a RT-PCR targeting the 5’untranslated region (UTR of the pestivirus genome. Thirty-nine lots (53.4% were positive for pestivirus RNA and one contained infectious virus. Nucleotide sequencing and phylogenetic analysis of the 5’UTR revealed 34 lots (46.6% containing RNA of bovine viral diarrhea virus type 1 (BVDV-1, being 23 BVDV-1a (5’ UTR identity 90.8-98.7%, eight BVDV-1b (93.9-96.7% and three BVDV-1d (96.2- 97.6%. Six lots (8.2% contained BVDV-2 (90.3-100% UTR identity being two BVDV-2a; three BVDV-2b and one undetermined. Four FBS batches (5.5% were found contaminated with HoBi-like virus (98.3 to 100%. Five batches (6.8% contained more than one pestivirus. The high frequency of contamination of FBS with pestivirus RNA reinforce the need for systematic and updated guidelines for monitoring this product to reduce the risk of contamination of biologicals and introduction of contaminating agents into free areas.

  2. 29 CFR 4010.13 - Confidentiality of information submitted.

    Science.gov (United States)

    2010-07-01

    ... REPORTING AND DISCLOSURE REQUIREMENTS ANNUAL FINANCIAL AND ACTUARIAL INFORMATION REPORTING § 4010.13 Confidentiality of information submitted. In accordance with § 4901.21(a)(3) of this chapter and ERISA section... 29 Labor 9 2010-07-01 2010-07-01 false Confidentiality of information submitted. 4010.13 Section...

  3. Second Line of Defense: Electronic Maintenance Reports, Local Maintenance Provider User Guide, Rev. 3

    Energy Technology Data Exchange (ETDEWEB)

    Leigh, Richard J.

    2012-09-01

    The Electronic Maintenance Report forms allow Local Maintenance Providers (LMP) and other program staff to enter maintenance information into a simple and secure system. This document describes the features and information required to complete the Maintenance Report forms. It is expected that all Corrective Maintenance Reports from LMPs will be submitted electronically into the SLD Portal. As an exception (e.g., when access to the SLD Portal is unavailable), Maintenance Reports can be submitted via a secure Adobe PDF form available through the Sustainability Manager assigned to each country.

  4. A Checklist for Submitting Your Risk Management Plan (RMP)

    Science.gov (United States)

    Important information about 2014 submissions and a checklist to consider in preparing and resubmitting a 5-year update, as required by 40 CFR part 68. Use the RMP*eSubmit software application, which replaced RMP*Submit.

  5. How well do we understand nitrous oxide emissions from open-lot cattle systems?

    Science.gov (United States)

    Nitrous oxide is an important greenhouse gas that is produced in manure. Open lot beef cattle feedyards emit nitrous oxide but little information is available about exactly how much is produced. This has become an important research topic because of environmental concerns. Only a few methods are ava...

  6. Electron beam effects on VLSI MOS conditions for testing and reconfiguration

    International Nuclear Information System (INIS)

    Girard, P.; Roche, F.M.; Pistoulet, B.

    1986-01-01

    Wafer scale integrated-MOS circuits problems related to test and reconfiguration by electron beams are analyzed. First of all the alterations in characteristics of MOS circuits submitted to an electron beam testing are considered. Then the capabilities of reconfiguration by an electron beam bombardment are discussed. The various phenomena involved are reviewed. Experimental data are reported and discussed on the light of data of the literature. (Auth.)

  7. 42 CFR 405.809 - Opportunity to submit evidence.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Opportunity to submit evidence. 405.809 Section 405.809 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICARE PROGRAM FEDERAL HEALTH INSURANCE FOR THE AGED AND DISABLED Appeals Under the Medicare Part B Program § 405.809 Opportunity to submit...

  8. Design Schematics for a Sustainable Parking Lot: Building 2-2332, ENRD Classroom, Fort Bragg, NC

    National Research Council Canada - National Science Library

    Stumpf, Annette

    2003-01-01

    ...) was tasked with planning a sustainable design "charrette" to explore and develop alternative parking lot designs that would meet Fort Bragg's parking needs, as well as its need to meet sustainable...

  9. Evaluating the Capability of Grass Swale for the Rainfall Runoff Reduction from an Urban Parking Lot, Seoul, Korea

    OpenAIRE

    Muhammad Shafique; Reeho Kim; Kwon Kyung-Ho

    2018-01-01

    This field study elaborates the role of grass swale in the management of stormwater in an urban parking lot. Grass swale was constructed by using different vegetations and local soil media in the parking lot of Mapu-gu Seoul, Korea. In this study, rainfall runoff was first retained in soil and the vegetation layers of the grass swale, and then infiltrated rainwater was collected with the help of underground perforated pipe, and passed to an underground storage trench. In this way, grass swale...

  10. Design of planar electron gun for UHF range, CW power inductive output tube

    International Nuclear Information System (INIS)

    Kaushik, Meenu; Joshi, L.M.

    2015-01-01

    Inductive Output Tube (lOT) is an amplifier which is now-a-days in demand for scientific applications. For every vacuum tube, electron gun is an important part and in fact considered as the heart of the tube. Hence, designing of this component is very crucial for efficient operation of the device throughout its lifetime. This paper is all about the electromagnetic (EM) design of planar electron gun of 40 kV, 3.5 A beam voltage and beam current respectively, for a 100 kW CW power lOT operating in UHF range. The design considerations and basic equations involved in its design are included in the paper. The gun structure has been optimized for getting the desired beam characteristics. The simulation results including the beam profile along with the beam current are shown using two commercial codes namely TRAK and MAGIC code. Planar shape of electron beam reduces space charge forces in the beam itself and consequently beam energy spread for a given current. The magnetic focusing of planar beam is easier comparative to spherical beam hence, this structure has been adopted for this particular device design. (author)

  11. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys

    OpenAIRE

    Hund, Lauren; Bedrick, Edward J.; Pagano, Marcello

    2015-01-01

    Lot quality assurance sampling (LQAS) surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we comp...

  12. 3. A 40-years record of the polymetallic pollution of the Lot River system, France

    Science.gov (United States)

    Audry, S.; Schäfer, J.; Blanc, G.; Veschambre, S.; Jouanneau, J.-M.

    2003-04-01

    The Lot River system (southwest France) is known for historic Zn and Cd pollution that originates from Zn ore treatment in the small Riou-Mort watershed and affects seafood production in the Gironde Estuary. We present a sedimentary record from 2 cores taken in a dam lake downstream of the Riou-Mort watershed covering the evolution of metal inputs into the Lot River over the past 40 years (1960-2001). Depth profiles of Cd, Zn, Cu and Pb concentrations are comparable indicating common sources and transport. The constant Zn/Cd ratio (˜50) observed in the sediment cores is similar to that in SPM from the Riou-Mort watershed, indicating the dominance of point source pollution upon the geochemical background signal. Cadmium, Zn, Cu and Pb concentrations in the studied sediment cores show an important peak in 42-44 cm depth with up to 300 mg.kg-1 (Cd), 10,000 mg.kg-1 (Zn), 150 mg.kg-1 (Cu) and 930 mg.kg-1 (Pb). These concentrations are much higher than geochemical background values; For example, Cd concentrations are more than 350-fold higher than those measured in the same riverbed upstream the confluence with the Riou-Mort River. This peak coincides with the upper 137Cs peak resulting from the Chernobyl accident (1986). Therefore, this heavy metal peak is attributed to the latest accidental Cd pollution of the Lot-River in 1986. Several downward heavy metal peaks reflect varying input probably due to changes in industrial activities within the Riou-Mort watershed. Given mean sedimentation rate of about 2 cm.yr-1, the record suggests constant and much lower heavy metal concentrations since the early nineties due to restriction of industrial activities and remediation efforts in the Riou-Mort watershed. Nevertheless, Cd, Zn, Cu and Pb concentrations in the upper sediment remain high, compared to background values from reference sites in the upper Lot River system.

  13. Demonstration Assessment of Light-Emitting Diode (LED) Parking Lot Lighting in Leavenworth, KS

    Energy Technology Data Exchange (ETDEWEB)

    Myer, Michael; Kinzey, Bruce R.; Curry, Ku' uipo

    2011-05-06

    This report describes the process and results of a demonstration of solid-state lighting (SSL) technology in a commercial parking lot lighting application, under the U.S. Department of Energy (DOE) Solid-State Lighting Technology GATEWAY Demonstration Program. The parking lot is for customers and employees of a Walmart Supercenter in Leavenworth, Kansas and this installation represents the first use of the LED Parking Lot Performance Specification developed by the DOE’s Commercial Building Energy Alliance. The application is a parking lot covering more than a half million square feet, lighted primarily by light-emitting diodes (LEDs). Metal halide wall packs were installed along the building facade. This site is new construction, so the installed baseline(s) were hypothetical designs. It was acknowledged early on that deviating from Walmart’s typical design would reduce the illuminance on the site. Walmart primarily uses 1000W pulse-start metal halide (PMH) lamps. In order to provide a comparison between both typical design and a design using conventional luminaires providing a lower illuminance, a 400W PMH design was also considered. As mentioned already, the illuminance would be reduced by shifting from the PMH system to the LED system. The Illuminating Engineering Society of North America (IES) provides recommended minimum illuminance values for parking lots. All designs exceeded the recommended illuminance values in IES RP-20, some by a wider margin than others. Energy savings from installing the LED system compared to the different PMH systems varied. Compared to the 1000W PMH system, the LED system would save 63 percent of the energy. However, this corresponds to a 68 percent reduction in illuminance as well. In comparison to the 400W PMH system, the LED system would save 44 percent of the energy and provide similar minimum illuminance values at the time of relamping. The LED system cost more than either of the PMH systems when comparing initial costs

  14. 78 FR 43753 - Inspection and Weighing of Grain in Combined and Single Lots

    Science.gov (United States)

    2013-07-22

    ... USGSA regulations for shiplots, unit trains, and lash barges. This final rule allows for breaks in... the loading of the lot must be reasonably continuous, with no consecutive break in loading to exceed... superseded; (iii) The location of the grain, if at rest, or the name(s) of the elevator(s) from which or into...

  15. Dynamic investigation of electron trapping and charge decay in electron-irradiated Al sub 2 O sub 3 in a scanning electron microscope: Methodology and mechanisms

    CERN Document Server

    Fakhfakh, S; Belhaj, M; Fakhfakh, Z; Kallel, A; Rau, E I

    2002-01-01

    The charging and discharging of polycrystalline Al sub 2 O sub 3 submitted to electron-irradiation in a scanning electron microscope (SEM) are investigated by means of the displacement current method. To circumvent experimental shortcomings inherent to the use of the basic sample holder, a redesign of the latter is proposed and tests are carried out to verify its operation. The effects of the primary beam accelerating voltage on charging, flashover and discharging phenomena during and after electron-irradiation are studied. The experimental results are then analyzed. In particular, the divergence between the experimental data and those predicted by the total electron emission yield approach (TEEYA) is discussed. A partial discharge was observed immediately after the end of the electron-irradiation exposure. The experimental data suggests, that the discharge is due to the evacuation to the ground, along the insulator surface, of released electrons from shallow traps at (or in the close vicinity of) the insulat...

  16. A basic period approach to the economic lot scheduling problem with shelf life considerations

    NARCIS (Netherlands)

    Soman, C.A.; van Donk, D.P.; Gaalman, G.J.C.

    2004-01-01

    Almost all the research on the economic lot scheduling problem (ELSP) considering limited shelf life of products has assumed a common cycle approach and an unrealistic assumption of possibility of deliberately reducing the production rate. In many cases, like in food processing industry where

  17. 30 CFR 218.580 - When do I submit Form MMS-4444?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false When do I submit Form MMS-4444? 218.580 Section 218.580 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR MINERALS REVENUE... Correspondence § 218.580 When do I submit Form MMS-4444? Initially, you must submit MMS Form-4444 by November 29...

  18. 45 CFR 149.320 - Universe of claims that must be submitted.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Universe of claims that must be submitted. 149.320 Section 149.320 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH... Universe of claims that must be submitted. (a) Claims submitted for an early retiree, as defined in § 149.2...

  19. 75 FR 30372 - Foreign-Trade Zone 196 Temporary/Interim Manufacturing Authority ATC Logistics & Electronics...

    Science.gov (United States)

    2010-06-01

    ... DEPARTMENT OF COMMERCE Foreign-Trade Zones Board [Docket T-2-2010] Foreign-Trade Zone 196 Temporary/Interim Manufacturing Authority ATC Logistics & Electronics (Cell Phone Kitting and Distribution... filed an application submitted by the ATC Logistics & Electronics, operator of Site 2, FTZ 196...

  20. Multi-period fuzzy mean-semi variance portfolio selection problem with transaction cost and minimum transaction lots using genetic algorithm

    Directory of Open Access Journals (Sweden)

    Mohammad Ali Barati

    2016-04-01

    Full Text Available Multi-period models of portfolio selection have been developed in the literature with respect to certain assumptions. In this study, for the first time, the portfolio selection problem has been modeled based on mean-semi variance with transaction cost and minimum transaction lots considering functional constraints and fuzzy parameters. Functional constraints such as transaction cost and minimum transaction lots were included. In addition, the returns on assets parameters were considered as trapezoidal fuzzy numbers. An efficient genetic algorithm (GA was designed, results were analyzed using numerical instances and sensitivity analysis were executed. In the numerical study, the problem was solved based on the presence or absence of each mode of constraints including transaction costs and minimum transaction lots. In addition, with the use of sensitivity analysis, the results of the model were presented with the variations of minimum expected rate of programming periods.

  1. A DESIGN STUDY OF AN INNOVATIVE BARRIER SYSTEM FOR PERSONAL PARKING LOTS

    OpenAIRE

    BÖRKLÜ, Hüseyin; KALYON, Sadık

    2018-01-01

    The increase in the number of cars made it necessary to protectthe parking areas. This research includes a literature review aboutcommercially available barriers, which are arm barriers, rising bollards, chainbarriers, automatic and manual private barriers from the point of common andside-by-side parking lots. Their advantages and disadvantages are evaluated.After the literature review work, a design requirements list for a car parkprotector, which includes important and strong properties of ...

  2. Transgressions des frontières maritimes. Le cas des îlots du Dodécanèse

    Directory of Open Access Journals (Sweden)

    Evdokia Olympitou

    2009-01-01

    Full Text Available Dans ce texte on constate que les îlots de la Mer Égée, qui se trouvent à petite distance des îles peuplées, constituaient une aide complémentaire pour les habitants des îles voisines car ils leur offraient quelques arpents de terre de plus, pour la culture ou l'élevage, et quelques milles anglais de côtes pour la pêche. Sur ces petits bouts de terre, l'habitat n'a jamais eu de caractéristiques permanentes qui auraient pu entraîner la formation de localités durables. Pour surpasser la frontière maritime on demandait des savoir-faire et des moyens de navigation que même les sociétés insulaires qui n'ont jamais exploité la mer pour leur survie, c'est-à-dire celles des agriculteurs et des éleveurs qui ne voyageaient pas et qui n'étaient pas familiers à la mer, pouvaient cependant acquérir. Étant donné que l'intervention et l'usage humains sont les éléments qui forgent la physionomie de l'espace, la "grande" île peuplée a toujours été le point de référence de chaque îlot. Les îlots "collés" à l'île voisine, comme par exemple Telendos, Alimnia et Saria de Dodécanèse, suivaient le sort de leur voisin, à moins qu'une particularité -comme le cas de l'îlot de Gyali, ne lui ait donné un autre type d'évolution.

  3. Two parameter-tuned metaheuristic algorithms for the multi-level lot sizing and scheduling problem

    Directory of Open Access Journals (Sweden)

    S.M.T. Fatemi Ghomi

    2012-10-01

    Full Text Available This paper addresses the problem of lot sizing and scheduling problem for n-products and m-machines in flow shop environment where setups among machines are sequence-dependent and can be carried over. Many products must be produced under capacity constraints and allowing backorders. Since lot sizing and scheduling problems are well-known strongly NP-hard, much attention has been given to heuristics and metaheuristics methods. This paper presents two metaheuristics algorithms namely, Genetic Algorithm (GA and Imperialist Competitive Algorithm (ICA. Moreover, Taguchi robust design methodology is employed to calibrate the parameters of the algorithms for different size problems. In addition, the parameter-tuned algorithms are compared against a presented lower bound on randomly generated problems. At the end, comprehensive numerical examples are presented to demonstrate the effectiveness of the proposed algorithms. The results showed that the performance of both GA and ICA are very promising and ICA outperforms GA statistically.

  4. Microwave Integrated Circuit Amplifier Designs Submitted to Qorvo for Fabrication with 0.09-micron High Electron Mobility Transistors (HEMTs) using 2-mil Gallium Nitride (GaN) on Silicon Carbide (SiC)

    Science.gov (United States)

    2016-03-01

    ARL-TN-0743 ● MAR 2016 US Army Research Laboratory Microwave Integrated Circuit Amplifier Designs Submitted to Qorvo for...originator. ARL-TN-0743 ● MAR 2016 US Army Research Laboratory Microwave Integrated Circuit Amplifier Designs Submitted to Qorvo...To) October 2015–January 2016 4. TITLE AND SUBTITLE Microwave Integrated Circuit Amplifier Designs Submitted to Qorvo for Fabrication with 0.09

  5. Mandatory Open Access Publishing for Electronic Theses and Dissertations: Ethics and Enthusiasm

    Science.gov (United States)

    Hawkins, Ann R.; Kimball, Miles A.; Ives, Maura

    2013-01-01

    This article argues against policies that require students to submit theses and dissertations to electronic institutional repositories. The article counters a variety of arguments often used to justify this practice. In addition, the article reports on the results of an examination of electronic thesis and dissertation policies at more than 150…

  6. 30 CFR 218.560 - How do I submit Form MMS-4444?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I submit Form MMS-4444? 218.560 Section... Correspondence § 218.560 How do I submit Form MMS-4444? A copy of Form MMS-4444 and instructions may be obtained from MMS. It will also be posted on the MMS Web site. Submit the completed, signed form to the address...

  7. 77 FR 30923 - Electronic Fund Transfers (Regulation E)

    Science.gov (United States)

    2012-05-24

    ... similar to a debit card that is linked to a traditional checking account. The Bureau is particularly interested in learning more about this product, including its costs, benefits, and risks to consumers. The... methods: Electronic: http://www.regulations.gov . Follow the instructions for submitting comments. Mail...

  8. The finite horizon economic lot sizing problem in job shops : the multiple cycle approach

    NARCIS (Netherlands)

    Ouenniche, J.; Bertrand, J.W.M.

    2001-01-01

    This paper addresses the multi-product, finite horizon, static demand, sequencing, lot sizing and scheduling problem in a job shop environment where the planning horizon length is finite and fixed by management. The objective pursued is to minimize the sum of setup costs, and work-in-process and

  9. Alternate Methods of Effluent Disposal for On-Lot Home Sewage Systems. Special Circular 214.

    Science.gov (United States)

    Wooding, N. Henry

    This circular provides current information for homeowners who must repair or replace existing on-lot sewage disposal systems. Several alternatives such as elevated sand mounds, sand-lined beds and trenches and oversized absorption areas are discussed. Site characteristics and preparation are outlined. Each alternative is accompanied by a diagram…

  10. 30 CFR 210.101 - Who must submit production reports?

    Science.gov (United States)

    2010-07-01

    ... MANAGEMENT FORMS AND REPORTS Production Reports-Oil and Gas § 210.101 Who must submit production reports? (a... operator number. To obtain an operator number, refer to the MMS Minerals Production Reporter Handbook for... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Who must submit production reports? 210.101...

  11. Lot-Order Assignment Applying Priority Rules for the Single-Machine Total Tardiness Scheduling with Nonnegative Time-Dependent Processing Times

    Directory of Open Access Journals (Sweden)

    Jae-Gon Kim

    2015-01-01

    Full Text Available Lot-order assignment is to assign items in lots being processed to orders to fulfill the orders. It is usually performed periodically for meeting the due dates of orders especially in a manufacturing industry with a long production cycle time such as the semiconductor manufacturing industry. In this paper, we consider the lot-order assignment problem (LOAP with the objective of minimizing the total tardiness of the orders with distinct due dates. We show that we can solve the LOAP optimally by finding an optimal sequence for the single-machine total tardiness scheduling problem with nonnegative time-dependent processing times (SMTTSP-NNTDPT. Also, we address how the priority rules for the SMTTSP can be modified to those for the SMTTSP-NNTDPT to solve the LOAP. In computational experiments, we discuss the performances of the suggested priority rules and show the result of the proposed approach outperforms that of the commercial optimization software package.

  12. 40 CFR 60.2900 - When must I submit my waste management plan?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... Waste Management Plan § 60.2900 When must I submit my waste management plan? You must submit a waste management plan prior to commencing construction, reconstruction, or modification. ...

  13. Dental bleaching on teeth submitted to enamel microabrasion 30 years ago-a case report of patients' compliance during bleaching treatment.

    Science.gov (United States)

    Sundfeld, Daniel; Pavani, Caio Cesar; Schott, Timm Cornelius; Machado, Lucas Silveira; Pini, Núbia Inocêncya Pavesi; Bertoz, André Pinheiro de Magalhães; Sundfeld, Renato Herman

    2018-04-20

    The present dental bleaching case report describes a new method that precisely quantifies the daily wearing-times of the bleaching product by inserting a microsensor in the acetate custom tray. The bleaching efficacy was also discussed since the patient was previously submitted to enamel microabrasion. The patient was submitted to enamel microabrasion in 1987, and bleaching treatment was performed in 2005. In 2017, re-bleaching was executed using 10% peroxide carbamide. The electronic microsensor, TheraMon (TheraMon® microelectronic system; Sales Agency Gschladt, Hargelsberg, Austria), was embedded in the labial region of the upper and lower acetate trays to evaluate the wearing-times of the acetate trays/bleaching product. The patient was instructed to wear the tray for 6 to 8 h/day while sleeping. After 24 days of bleaching treatment, the data obtained from the TheraMon electronic devices was collected and interpreted. The patient did not entirely follow the bleaching treatment as recommended, as there was no evidence of use of the upper and lower trays for some days; additionally, the bleaching product was used for shorter and longer periods than was instructed. The TheraMon microeletronic device precisely measured the wearing-times of the acetate tray/bleaching product during the bleaching treatment. Teeth submitted to enamel microabrasion presented with a healthy clinical appearance after 30 years. Measuring the length and frequency of use of an acetate tray/bleaching product can be important to clinicians and patients for obtaining a controlled and adequate bleaching treatment.

  14. Negotiation-based Order Lot-Sizing Approach for Two-tier Supply Chain

    Science.gov (United States)

    Chao, Yuan; Lin, Hao Wen; Chen, Xili; Murata, Tomohiro

    This paper focuses on a negotiation based collaborative planning process for the determination of order lot-size over multi-period planning, and confined to a two-tier supply chain scenario. The aim is to study how negotiation based planning processes would be used to refine locally preferred ordering patterns, which would consequently affect the overall performance of the supply chain in terms of costs and service level. Minimal information exchanges in the form of mathematical models are suggested to represent the local preferences and used to support the negotiation processes.

  15. The impact of electronic cigarettes on the paediatric population

    OpenAIRE

    Durmowicz, Elizabeth L

    2014-01-01

    Objective To review the impact of electronic cigarettes (e-cigarettes) on children. Methods Five electronic databases were searched through 31 December 2013. Studies in English that included data for children younger than 18 years of age were included. In addition, relevant data from articles identified during searches of the e-cigarette literature, relevant state survey data and paediatric voluntary adverse event reports submitted to the US Food and Drug Administration (FDA) were reviewed an...

  16. Hydrologic and Pollutant Removal Performance of a Full-Scale, Fully Functional Permeable Pavement Parking Lot

    Science.gov (United States)

    In accordance with the need for full-scale, replicated studies of permeable pavement systems used in their intended application (parking lot, roadway, etc.) across a range of climatic events, daily usage conditions, and maintenance regimes to evaluate these systems, the EPA’s Urb...

  17. An efficient computational method for a stochastic dynamic lot-sizing problem under service-level constraints

    NARCIS (Netherlands)

    Tarim, S.A.; Ozen, U.; Dogru, M.K.; Rossi, R.

    2011-01-01

    We provide an efficient computational approach to solve the mixed integer programming (MIP) model developed by Tarim and Kingsman [8] for solving a stochastic lot-sizing problem with service level constraints under the static–dynamic uncertainty strategy. The effectiveness of the proposed method

  18. 40 CFR 62.14715 - When must I submit my waste management plan?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false When must I submit my waste management... submit my waste management plan? You must submit the waste management plan no later than April 5, 2004. ... POLLUTANTS Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That...

  19. 46 CFR 67.218 - Optional filing of instruments in portable document format as attachments to electronic mail.

    Science.gov (United States)

    2010-10-01

    ... format as attachments to electronic mail. 67.218 Section 67.218 Shipping COAST GUARD, DEPARTMENT OF... format as attachments to electronic mail. (a) Any instrument identified as eligible for filing and recording under § 67.200 may be submitted in portable document format (.pdf) as an attachment to electronic...

  20. 40 CFR 60.2060 - When must I submit my waste management plan?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... Management Plan § 60.2060 When must I submit my waste management plan? You must submit a waste management... Commercial and Industrial Solid Waste Incineration Units for Which Construction Is Commenced After November...

  1. Exponential Smoothing for Multi-Product Lot-Sizing With Heijunka and Varying Demand

    OpenAIRE

    Grimaud Frédéric; Dolgui Alexandre; Korytkowski Przemyslaw

    2014-01-01

    Here we discuss a multi-product lot-sizing problem for a job shop controlled with a heijunka box. Demand is considered as a random variable with constant variation which must be absorbed somehow by the manufacturing system, either by increased inventory or by flexibility in the production. When a heijunka concept (production leveling) is used, fluctuations in customer orders are not transferred directly to the manufacturing system allowing for a smoother production and better production capac...

  2. Electron gas interacting in a metal, submitted to a strong magnetic field

    International Nuclear Information System (INIS)

    Alcaraz, Francisco Castilho

    1977-01-01

    Using the propagator's technique in the grand ensemble developed by Montroll and Ward we investigate the magnetic properties of an interacting electron gas in a strong magnetic field. The free propagator properly constructed shows that the spin paramagnetism does not have a term with strong temperature dependence, contrary to the result of Isihara. Considering the electron density to be constant, the dHVA oscillations in the magnetic susceptibility and sound velocity, considering the effects of first exchange interactions, show only one phase in agreement with experimental result, while Ichimura and Isihara obtained two phases differing by π/2. The effects of first order exchange interactions in the dHVA oscillations of the magnetic susceptibility and sound velocity give rise to an exponential factor in the amplitudes of oscillator (Dingle factor), being the Dingle temperature linearly dependent of the Fermi velocity. The calculations of the ring diagram contribution to the grand partition function, show that the approximation used by Isihara for this calculations is not good and the dHVA oscillations of the contributions from the ring diagrams for the grand partition function have a phase differing by π/2 from that obtained by Isihara. (author)

  3. 45 CFR 2523.110 - Can Federal agencies submit multiple applications?

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Can Federal agencies submit multiple applications? 2523.110 Section 2523.110 Public Welfare Regulations Relating to Public Welfare (Continued) CORPORATION... AMERICORPS PROGRAM ASSISTANCE § 2523.110 Can Federal agencies submit multiple applications? No. The...

  4. 40 CFR 60.3011 - When must I submit my waste management plan?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... Model Rule-Waste Management Plan § 60.3011 When must I submit my waste management plan? You must submit a waste management plan no later than 60 days following the initial performance test as specified in...

  5. 40 CFR 62.14585 - When must I submit my waste management plan?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false When must I submit my waste management... Commenced Construction On or Before November 30, 1999 Waste Management Plan § 62.14585 When must I submit my waste management plan? You must submit a waste management plan no later than April 5, 2004. ...

  6. 40 CFR 60.2625 - When must I submit my waste management plan?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... or Before November 30, 1999 Model Rule-Waste Management Plan § 60.2625 When must I submit my waste management plan? You must submit a waste management plan no later than the date specified in table 1 of this...

  7. PREFACE: 19th International Conference on Electron Dynamics in Semiconductors, Optoelectronics and Nanostructures (EDISON'19)

    Science.gov (United States)

    González, T.; Martín-Martínez, M. J.; Mateos, J.

    2015-10-01

    from Japan and USA. The two topics receiving more abstracts correspond to fields attracting a lot of attention and research activity in the last years: electron dynamics in graphene and related materials and devices, and THz phenomena in nanostructures. Other topics like coherent dynamics in ultrafast optical phenomena or quantum processing, and semiconductor-based spintronics, had also an important presence in the program. Thanks are given to the members of the International and Scientific Program Committees for their valuable and qualified assistance in the selection of invited speakers and the review of the submitted contributions; and also to those attendees who assisted us in the review process of the papers included in this volume. We would like also to thank the institutions and sponsors that contributed to support the conference. Firstly the University of Salamanca, one of the oldest in the world, commemorating within three years, in 2018, the 8th century of its foundation in 1218. EDISON'19 can be considered as one more of the events taking place to celebrate such centennial. The Salamanca City Council also contributed in the organization of the conference. We acknowledge as well the support from the Spanish Ministry of Economy and Competitiveness, and from our sponsors and exhibitors, Oxford Instruments and Rohde&Schwarz. Finally, we would like to thank all participants and authors of the proceedings for their support and contributions to the conference. We devote this volume to the memory of Prof. Daniel Pardo, our dear boss in Salamanca for many years, who passed away in 2013. He was the pioneer of our activity in the field of the conference and would have enjoyed a lot the celebration of EDISON in Salamanca.

  8. Measurements on cation exchange capacity of bentonite in the long-term test of buffer material (LOT)

    International Nuclear Information System (INIS)

    Muurinen, A.

    2011-01-01

    Determination of cation exchange capacity (CEC) of bentonite in the LOT experiment was the topic of this study. The measurements were performed using the complex of copper(II) ion with trietylenetetramine [Cu(trien)] 2+ as the index cation. Testing of the determination method suggested that (i) drying and wetting of the bentonite, and (ii) exchange time affect the obtained result. The real CEC measurements were carried out with the bentonite samples taken from the A2 parcel of the LOT experiment. The CEC values of the LOT samples were compared with those of the reference samples taken from the same bentonite batch before the compaction of the blocks for the experiment. The conclusions drawn have been made on the basis of the results determined with the wet bentonite samples using the direct exchange of two weeks with 0.01 M [Cu(trien)] 2+ solution because this method gave the most complete cation exchange in the CEC measurements. The differences between the samples taken from different places of the A2 parcel were quite small and close to the accuracy of the method. However, it seems that the CEC values of the field experiment are somewhat higher than the CEC of the reference samples and the values of the hot area are higher than those obtained from the low temperature area. It is also obvious that the variation of CEC increases with increasing temperature. (orig.)

  9. 40 CFR 167.90 - Where to obtain and submit forms.

    Science.gov (United States)

    2010-07-01

    ... establishments not found at the same location as their company headquarters, must submit applications and reports... establishments not found at the same location as their company headquarters to be submitted by the company headquarters to the Regional Office having jurisdiction over the State in which the company headquarters is...

  10. Making Marble Tracks Can Involve Lots of Fun as Well as STEM Learning

    Science.gov (United States)

    Nagel, Bert

    2015-01-01

    Marble tracks are a very popular toy and big ones can be found in science centres in many countries. If children want to make a marble track themselves it is quite a job. It takes a long time, they can take up a lot of space and most structures are quite fragile, as the materials used can very quickly prove unfit for the task and do not last very…

  11. Optimal Lot Sizing with Scrap and Random Breakdown Occurring in Backorder Replenishing Period

    OpenAIRE

    Ting, Chia-Kuan; Chiu, Yuan-Shyi; Chan, Chu-Chai

    2011-01-01

    This paper is concerned with determination of optimal lot size for an economic production quantity model with scrap and random breakdown occurring in backorder replenishing period. In most real-life manufacturing systems, generation of defective items and random breakdown of production equipment are inevitable. To deal with the stochastic machine failures, production planners practically calculate the mean time between failures (MTBF) and establish the robust plan accordingly, in terms of opt...

  12. 30 CFR 253.40 - What OSFR evidence must I submit to MMS?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What OSFR evidence must I submit to MMS? 253.40... § 253.40 What OSFR evidence must I submit to MMS? (a) You must submit to MMS: (1) A single demonstration... unaltered Form MMS-1016; (3) MMS forms that identify your COFs (Form MMS-1021, Form MMS-1022), and the...

  13. Effects of ground surface decontamination on the air radiation dose rate. Results of a decontamination trial at a playground lot in a Fukushima residential area

    International Nuclear Information System (INIS)

    Tagawa, Akihiro

    2012-01-01

    The Japan Atomic Energy Agency decontaminated schools, playgrounds, swimming pools, and houses in nonevacuated, less-contaminated areas in Fukushima for environmental restoration. A small, 150 m 2 playground lot in the residential area was chosen for decontamination demonstration, which used routinely available tools and commodities to carry out the work. The surfaces of playground lot equipment, such as swings, slides, and horizontal iron bars, were completely decontaminated by brushing with water and/or detergent. Side gutters around the playground lot were cleaned by removing the mud and then brushed and washed with a high-pressure water jet (7 MPa). The air dose rate at the playground lot was dominated by radiation from the ground surface and adjacent surroundings, such as apartments and rice fields. Two or three centimeters of the surface soil contaminated with cesium was removed manually with shovels, hoes, and other gardening tools. This significantly reduced the average air dose rate of the entire playground lot from 1.5 μSv/h before decontamination to 0.6 μSv/h. These results showed that ground surface decontamination can contribute measurably to the reduction in air dose rate in relatively small areas in residential areas. (author)

  14. Where is my car? Examining wayfinding behavior in a parking lot

    Directory of Open Access Journals (Sweden)

    Rodrigo Mora

    2014-08-01

    Full Text Available This article examines wayfinding behavior in an extended parking lot belonging to one of the largest shopping malls in Santiago, Chile. About 500 people were followed while going to the mall and returning from it, and their trajectories were mapped and analyzed. The results indicate that inbound paths were, in average, 10% shorter that outbound paths, and that people stopped three times more frequently when leaving the mall than when accessing it. It is argued that these results are in line with previous research on the subject, which stress the importance of environmental information in shaping people`s behavior.

  15. 39 CFR 912.7 - Evidence and information to be submitted.

    Science.gov (United States)

    2010-07-01

    ... bearing on either the responsibility of the United States for the death or the damages claimed. (b... and information to be submitted. (a) Death. In support of a claim based on death, the claimant may be required to submit the following evidence or information: (1) An authenticated death certificate or other...

  16. 31 CFR 375.12 - How do I submit an offer?

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false How do I submit an offer? 375.12 Section 375.12 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL... way for any unauthorized tender submissions or for any delays, errors, or omissions in submitting...

  17. Evaluation of primary immunization coverage of infants under universal immunization programme in an urban area of bangalore city using cluster sampling and lot quality assurance sampling techniques.

    Science.gov (United States)

    K, Punith; K, Lalitha; G, Suman; Bs, Pradeep; Kumar K, Jayanth

    2008-07-01

    Is LQAS technique better than cluster sampling technique in terms of resources to evaluate the immunization coverage in an urban area? To assess and compare the lot quality assurance sampling against cluster sampling in the evaluation of primary immunization coverage. Population-based cross-sectional study. Areas under Mathikere Urban Health Center. Children aged 12 months to 23 months. 220 in cluster sampling, 76 in lot quality assurance sampling. Percentages and Proportions, Chi square Test. (1) Using cluster sampling, the percentage of completely immunized, partially immunized and unimmunized children were 84.09%, 14.09% and 1.82%, respectively. With lot quality assurance sampling, it was 92.11%, 6.58% and 1.31%, respectively. (2) Immunization coverage levels as evaluated by cluster sampling technique were not statistically different from the coverage value as obtained by lot quality assurance sampling techniques. Considering the time and resources required, it was found that lot quality assurance sampling is a better technique in evaluating the primary immunization coverage in urban area.

  18. 10 CFR 14.23 - Evidence and information to be submitted.

    Science.gov (United States)

    2010-01-01

    ... and death. (8) Any other evidence or information which may have a bearing on either the responsibility... Procedures and Requirements § 14.23 Evidence and information to be submitted. (a) Death. In support of a claim based on death, the claimant may be required to submit the following evidence or information: (1...

  19. 76 FR 26223 - Petition for Rulemaking Submitted by Thomas Popik

    Science.gov (United States)

    2011-05-06

    ... Rulemaking Submitted by Thomas Popik AGENCY: Nuclear Regulatory Commission. ACTION: Petition for rulemaking... filed with the NRC by Thomas Popik. The petition was docketed by the NRC on March 15, 2011, and has been... received a petition for rulemaking on March 14, 2011 (PRM- 50-96). The petition was submitted by Mr. Thomas...

  20. Electronic Scholarly Journals: A Review of Technical Issues in Digital Environment

    Directory of Open Access Journals (Sweden)

    Golnessa Galyani Moghaddam

    2006-12-01

    Full Text Available Scholarly journals are known as the most important medium for scholarly communication since long time back. As technology transforms the flow of information and idea everywhere, it changes the nature of scholarly communications and publishing of scholarly journals as well. The electronic scholarly publishing rapidly produced an expectation, among researchers of the availability of articles at their desktop, rather than the previous scenario of visiting the library to read a print journal issue. There are lots of technological improvements in electronic journals publishing. The present paper looks at some of technical issues in electronic publishing such as DOI, DOI-X, CrossRef, Citation/Reference Linking, OpenURL, SFX and MetaLib which are being used in the World Wide Web.

  1. Heritage plaza parking lots improvement project- Solar PV installation

    Energy Technology Data Exchange (ETDEWEB)

    Hooks, Todd [Agua Caliente Indian Reservation, Palm Springs, CA (United States)

    2017-03-31

    The Agua Caliente Band of Cahuilla Indians (ACBCI or the “Tribe”) installed a 79.95 kW solar photovoltaic (PV) system to offset the energy usage costs of the Tribal Education and Family Services offices located at the Tribe's Heritage Plaza office building, 90I Tahquitz Way, Palm Springs, CA, 92262 (the "Project"). The installation of the Solar PV system was part of the larger Heritage Plaza Parking Lot Improvements Project and mounted on the two southern carport shade structures. The solar PV system will offset 99% of the approximately 115,000 kWh in electricity delivered annually by Southern California Edison (SCE) to the Tribal Education and Family Services offices at Heritage Plaza, reducing their annual energy costs from approximately $22,000 annually to approximately $200. The total cost of the proposed solar PV system is $240,000.

  2. The Possibilities of Installing Electronic CMR Waybill in Road Transport Sector

    Directory of Open Access Journals (Sweden)

    Arvydas Baublys

    2016-02-01

    Full Text Available In the article opportunities of changing paper CMR waybill into electronic are analysed, whereas the paper CMR waybill does not guarantee operational information exchange between participants of logistics chain components in road transport. Due to this reason use ofelectronic CMR waybill becomes more and more important. According to researches done by article authors, the article submitted the limitations of paper CMR waybill, benefits of electronic CMR waybill, concept model of implementing electronic CMR waybill and application possibilities of supply chain components.

  3. 44 CFR 65.4 - Right to submit new technical data.

    Science.gov (United States)

    2010-10-01

    ... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Right to submit new technical... IDENTIFICATION AND MAPPING OF SPECIAL HAZARD AREAS § 65.4 Right to submit new technical data. (a) A community has..., other than those initiatedby FEMA, must be made in writing by the Chief Executive Officer of the...

  4. 37 CFR 2.54 - Requirements for drawings submitted on paper.

    Science.gov (United States)

    2010-07-01

    ... submitted on paper. 2.54 Section 2.54 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK... drawings submitted on paper. The drawing must meet the requirements of § 2.52. In addition, in a paper submission, the drawing should: (a) Be on non-shiny white paper that is separate from the application; (b) Be...

  5. 15 CFR 325.14 - Submitting reports.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Submitting reports. 325.14 Section 325.14 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE MISCELLANEOUS REGULATIONS EXPORT TRADE CERTIFICATES...

  6. Influence of natural antioxidants on lipid composition of beef burgers submitted to irradiation in 60 Co source and electron beams

    International Nuclear Information System (INIS)

    Trindade, Reginaldo Almeida da

    2007-01-01

    Radiation processing has been employed in some countries as a mean of treatment to assure microbiological safety of meat and meat products, avoiding the occurrence of food-borne disease. The ionizing radiation may cause some undesirable changes on chemistry composition of food and the lipid oxidation is one of the main reactions. In meat products processing industry, the lipid composition is directly related to nutritional and sensory quality of the product. For preventing oxidation, use of antioxidants which can be synthetic or natural, has been practically applied in some products. Currently, most attention has been given to natural antioxidants from herbs and spices like rosemary and oregano. The aim this study was to assess the antioxidant effects of either rosemary and oregano extract in beef burgers submitted to irradiation in 60 Co source with dose 6, 7 e 8 kGy, electron beams with dose 3,5 e 7 kGy and storage under freeze along 0, 45 e 90 days. The results showed that rosemary extract has the major antioxidant effects when it is used on heterogeneous food matrix like beef burger, but oregano extract was better efficient to delay lipid oxidation along storage time when it is used in synergism with rosemary and/or BHT/BHA. Although to have occurred changes in the fatty acids composition it was not possible to demonstrate a straight dependence of irradiation dose and/or storage time. Sensory analysis showed that between the samples prepared with natural antioxidants, the beef burger prepared with oregano has received better scores by panelists. Irradiated beef burger prepared with rosemary has received better scores when compared to non-irradiated one. The use of spices with antioxidant activity to avoid the oxidative damage in foods that contain fats in their formulation is thought to be promising to application in food facilities. (author)

  7. 27 CFR 73.35 - Do I need to keep paper copies of forms I submit to TTB electronically?

    Science.gov (United States)

    2010-04-01

    ... Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Filing of Documents with TTB § 73... unless TTB otherwise authorizes you to maintain electronic copies of these documents through a general...

  8. 28 CFR 54.225 - Educational institutions eligible to submit transition plans.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Educational institutions eligible to submit transition plans. 54.225 Section 54.225 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED... Coverage § 54.225 Educational institutions eligible to submit transition plans. (a) Application. This...

  9. Electronic data collection for the analysis of surgical maneuvers on patients submitted to rhinoplasty

    Science.gov (United States)

    Berger, Cezar; Freitas, Renato; Malafaia, Osvaldo; Pinto, José Simão de Paula; Mocellin, Marcos; Macedo, Evaldo; Fagundes, Marina Serrato Coelho

    2012-01-01

    Summary Introduction: In the health field, computerization has become increasingly necessary in professional practice, since it facilitates data recovery and assists in the development of research with greater scientific rigor. Objective: the present work aimed to develop, apply, and validate specific electronic protocols for patients referred for rhinoplasty. Methods: The prospective research had 3 stages: (1) preparation of theoretical data bases; (2) creation of a master protocol using Integrated System of Electronic Protocol (SINPE©); and (3) elaboration, application, and validation of a specific protocol for the nose and sinuses regarding rhinoplasty. Results: After the preparation of the master protocol, which dealt with the entire field of otorhinolaryngology, we idealized a specific protocol containing all matters related to the patient. In particular, the aesthetic and functional nasal complaints referred for surgical treatment (i.e., rhinoplasty) were organized into 6 main hierarchical categories: anamnesis, physical examination, complementary exams, diagnosis, treatment, and outcome. This protocol utilized these categories and their sub-items: finality; access; surgical maneuvers on the nasal dorsum, tip, and base; clinical evolution after 3, 6, and 12 months; revisional surgery; and quantitative and qualitative evaluations. Conclusion: The developed electronic-specific protocol is feasible and important for information registration from patients referred to rhinoplasty. PMID:25991979

  10. Electronic data collection for the analysis of surgical maneuvers on patients submitted to rhinoplasty

    Directory of Open Access Journals (Sweden)

    Berger, Cezar

    2012-01-01

    Full Text Available Introduction: In the health field, computerization has become increasingly necessary in professional practice, since it facilitates data recovery and assists in the development of research with greater scientific rigor. Objective: the present work aimed to develop, apply, and validate specific electronic protocols for patients referred for rhinoplasty. Methods: The prospective research had 3 stages: (1 preparation of theoretical data bases; (2 creation of a master protocol using Integrated System of Electronic Protocol (SINPE©; and (3 elaboration, application, and validation of a specific protocol for the nose and sinuses regarding rhinoplasty. Results: After the preparation of the master protocol, which dealt with the entire field of otorhinolaryngology, we idealized a specific protocol containing all matters related to the patient. In particular, the aesthetic and functional nasal complaints referred for surgical treatment (i.e., rhinoplasty were organized into 6 main hierarchical categories: anamnesis, physical examination, complementary exams, diagnosis, treatment, and outcome. This protocol utilized these categories and their sub-items: finality; access; surgical maneuvers on the nasal dorsum, tip, and base; clinical evolution after 3, 6, and 12 months; revisional surgery; and quantitative and qualitative evaluations. Conclusion: The developed electronic-specific protocol is feasible and important for information registration from patients referred to rhinoplasty.

  11. Note on "An efficient approach for solving the lot-sizing problem with time-varying storage capacities"

    NARCIS (Netherlands)

    W. van den Heuvel (Wilco); J.M. Gutierrez (Jose Miguel); H.C. Hwang (Hark-Chin)

    2011-01-01

    textabstractIn a recent paper Gutierrez et al. (2008) show that the lot-sizing problem with inventory bounds can be solved in O(T log T) time. In this note we show that their algorithm does not lead to an optimal solution in general.

  12. TERRITORIALISATION DU RISQUE SANITAIRE : : Les "immeubles tuberculeux" de l' îlot insalubre Saint Gervais(1894-1930)

    OpenAIRE

    Fijalkow , Yankel

    1996-01-01

    International audience; Etude statistique sur la réalité de la dynamique de contagion tuberculeuse dans l'îlot insalubre n° 16 de Paris. Conjonction des données statistiques avec les volontés politiques de la municipalité parisienne avant 1945.

  13. Hydrologic and Pollutant Removal Performance of a Full-Scale, Fully Functional Permeable Pavement Parking Lot - paper

    Science.gov (United States)

    To meet the need for long-term, full-scale, replicated studies of permeable pavement systems used in their intended application (parking lot, roadway, etc.) across a range of climatic events, daily usage conditions, and maintenance regimes to evaluate these systems, the EPA’s Urb...

  14. Evaluation of primary immunization coverage of infants under universal immunization programme in an urban area of Bangalore city using cluster sampling and lot quality assurance sampling techniques

    Directory of Open Access Journals (Sweden)

    Punith K

    2008-01-01

    Full Text Available Research Question: Is LQAS technique better than cluster sampling technique in terms of resources to evaluate the immunization coverage in an urban area? Objective: To assess and compare the lot quality assurance sampling against cluster sampling in the evaluation of primary immunization coverage. Study Design: Population-based cross-sectional study. Study Setting: Areas under Mathikere Urban Health Center. Study Subjects: Children aged 12 months to 23 months. Sample Size: 220 in cluster sampling, 76 in lot quality assurance sampling. Statistical Analysis: Percentages and Proportions, Chi square Test. Results: (1 Using cluster sampling, the percentage of completely immunized, partially immunized and unimmunized children were 84.09%, 14.09% and 1.82%, respectively. With lot quality assurance sampling, it was 92.11%, 6.58% and 1.31%, respectively. (2 Immunization coverage levels as evaluated by cluster sampling technique were not statistically different from the coverage value as obtained by lot quality assurance sampling techniques. Considering the time and resources required, it was found that lot quality assurance sampling is a better technique in evaluating the primary immunization coverage in urban area.

  15. Electronic transport in torsional strained Weyl semimetals

    Science.gov (United States)

    Soto-Garrido, Rodrigo; Muñoz, Enrique

    2018-05-01

    In a recent paper (Muñoz and Soto-Garrido 2017 J. Phys.: Condens. Matter 29 445302) we have studied the effects of mechanical strain and magnetic field on the electronic transport properties in graphene. In this article we extended our work to Weyl semimetals (WSM). We show that although the WSM are 3D materials, most of the analysis done for graphene (2D material) can be carried out. In particular, we studied the electronic transport through a cylindrical region submitted to torsional strain and external magnetic field. We provide exact analytical expressions for the scattering cross section and the transmitted electronic current. In addition, we show the node-polarization effect on the current and propose a recipe to measure the torsion angle from transmission experiments.

  16. Stability measures for rolling schedules with applications to capacity expansion planning, master production scheduling, and lot sizing

    OpenAIRE

    Kimms, Alf

    1996-01-01

    This contribution discusses the measurement of (in-)stability of finite horizon production planning when done on a rolling horizon basis. As examples we review strategic capacity expansion planning, tactical master production schedulng, and operational capacitated lot sizing.

  17. Note on "An efficient approach for solving the lot-sizing problem with time-varying storage capacities"

    NARCIS (Netherlands)

    W.J. van den Heuvel; J.M. Gutierrez (Jose Miguel); H.C. Hwang (Hark-Chin)

    2010-01-01

    textabstractIn a recent paper Gutiérrez et al. (2008) show that the lot-sizing problem with inventory bounds can be solved in O(T log T) time. In this note we show that their algorithm does not lead to an optimal solution in general.

  18. 25 CFR 533.2 - Time for submitting management contracts and amendments.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Time for submitting management contracts and amendments. 533.2 Section 533.2 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR MANAGEMENT CONTRACT PROVISIONS APPROVAL OF MANAGEMENT CONTRACTS § 533.2 Time for submitting management contracts and...

  19. A software development for establishing optimal production lots and its application in academic and business environments

    Directory of Open Access Journals (Sweden)

    Javier Valencia Mendez

    2014-09-01

    Full Text Available The recent global economic downturn has increased an already perceived need in organizations for cost savings. To cope with such need, companies can opt for different strategies. This paper focuses on optimizing processes and, more specifically, determining the optimal lot production. To determine the optimal lot of a specific production process, a new software was developed that not only incorporates various productive and logistical elements in its calculations but also affords users a practical way to manage the large number of input parameters required to determine the optimal batch. The developed software has not only been validated by several companies, both Spanish and Mexican, who achieved significant savings, but also used as a teaching tool in universities with highly satisfactory results from the point of view of student learning. A special contribution of this work is that the developed tool can be sent to the interested reader free of charge upon request.

  20. Electron beam combined with hydrothermal treatment for enhancing the enzymatic convertibility of sugarcane bagasse

    International Nuclear Information System (INIS)

    Duarte, C.L.; Ribeiro, M.A.; Oikawa, H.; Mori, M.N.; Napolitano, C.M.; Galvão, C.A.

    2012-01-01

    The use of microbial cellulolytic enzymes is the most efficient process to liberate glucose from cellulose in biomass without the formation of fermentation inhibitors. A combination of pretreatment technologies is an alternative way to increase the access of enzymes to cellulose, and consequently, the conversion yield. In this way, the present study reports on the enzymatic hydrolysis of SCB submitted to three kinds of pretreatment: electron beam processing (EBP), and EBP followed by hydrothermal (TH) and diluted acid (AH) treatment. SCB samples were irradiated using a radiation dynamics electron beam accelerator, and then submitted to thermal and acid (0.1% sulfuric acid) hydrolysis for 40 and 60 min at 180 °C. These samples were submitted to enzymatic hydrolysis (EH) using commercial preparations, including Celluclast 1.5 L and beta-glycosidase. The addition of diluted acid improved TH treatment allowing for a shorter application time. EBP with 50 kGy increased the enzymatic hydrolysis yield of cellulose by 20% after TH and 30% after AH. - Highlights: ► We study the enzymatic hydrolysis of cellulose and hemicellulose in sugarcane bagasse. ► We study the combination of three pretreatments: electron beam processing, EBP followed by hydrothermal and by diluted acid treatment. ► The electron beam processing increased the enzymatic hydrolysis from 8% to 15% with 20 kGy. ► The enzymes used were commercial preparations, as Celluclast 1.5 L and β-glycosidase. ► The EBP with 50 kGy increased on 20% the yield of EH of cellulose after TH and 30% after AH.

  1. SENSITIVITY EVALUATION OF THE ELECTRONIC CAR SCALE

    Directory of Open Access Journals (Sweden)

    Tomasz KĄDZIOŁKA

    2014-06-01

    Full Text Available During every day activities related with performed work or homework duties we meet a lot of equipment and we don't realize about their complex construction. This can be different type of equipment making every day work easier, such as food processors, dishwashers, ecologic furnaces, gas stoves or mechanisms, which are intended for protection against rain, which are personal umbrellas or devices ensuring higher safety such as ABS in a car or equipment used for measuring different values such as thermometers, barometers and finally scales. Scales due to performed tasks should be rated to measuring equipment which in metrology for example are used to specify linear and angular dimensions or deviations from nominal dimensions. In this article we present results of electronic scales sensitivity tests. For comparison of test results two electronic scales with different measuring range were analyzed

  2. Electron-lattice Interaction and Nonlinear Excitations in Cuprate Structures

    International Nuclear Information System (INIS)

    Paulsen, J.; Eschrig, H.; Drechsler, S.L.; Malek, J.

    1995-01-01

    A low temperature lattice modulation of the chains of the YBa 2 Cu 3 O 7 is considered by deriving a Hamiltonian of electron-lattice interaction from density-functional calculations for deformed lattice and solving it for the groundstate. Hubbard-type Coulomb interaction is included. The obtained groundstate is a charge-density-wave state with a pereodicity of four lattice constants and a gap for one-electron excitations of about 1eV, sensitively depending on parameters of the Hamiltonian. There are lots of polaronic and solitonic excitations with formation energies deep in the gap, which can pin the Fermi level and thus produce again metallicity of the chain. They might also contribute to pairing of holes in adjacent CuO 2 -planes. (author)

  3. 20 CFR 10.801 - How are medical bills to be submitted?

    Science.gov (United States)

    2010-04-01

    ... employees, except for treatment and supplies provided by nursing homes, shall be supported by medical... separate bill shall be submitted when the employee is discharged from treatment or monthly, if treatment for the work-related condition is necessary for more than 30 days. (1)(i) Hospitals shall submit...

  4. 40 CFR 152.93 - Citation of a previously submitted valid study.

    Science.gov (United States)

    2010-07-01

    ... Data Submitters' Rights § 152.93 Citation of a previously submitted valid study. An applicant may demonstrate compliance for a data requirement by citing a valid study previously submitted to the Agency. The... the original data submitter, the applicant may cite the study only in accordance with paragraphs (b...

  5. Color and opacity of composites protected with surface sealants and submitted to artificial accelerated aging.

    Science.gov (United States)

    Aguilar, Fabiano Gamero; Roberti Garcia, Lucas da Fonseca; Cruvinel, Diogo Rodrigues; Sousa, Ana Beatriz Silva; de Carvalho Panzeri Pires-de-Souza, Fernanda

    2012-01-01

    To evaluate the color similarity, stability and opacity of composites (TPH, Charisma, and Concept, shade A2) protected with surface sealants (Fortify Plus and Biscover) and cyanoacrylate (Super Bonder). Forty specimens of each composite were made and separated into 4 groups (n=10) according to the surface protection: GI - without sealant; GII - cyanoacrylate; GIII - Fortify Plus; GIV - Biscover. Color and opacity readings were taken before and after Artificial Acelerated Aging (AAA) and the values obtained for color stability were submitted to statistical analysis by 2-way ANOVA and Bonferroni's test (P<.05). The values acquired for color similarity were submitted to 1-way ANOVA and Tukey's test (P<.05). The specimen sufaces were compared before and after AAA using Scanning Electronic Microscopy (SEM). Studied composites did not present the same values for the coordinates L*, a* and b * before AAA, indicating that there was no color similarity among them. All composites presented color alteration after AAA with clinically unacceptable values. Protected groups presented lower opacity variation after AAA, in comparison with the control goup. SEM evaluation demonstrated that AAA increased the surface irregularities in all of the studied groups. Surface sealants were not effective in maintaining composite color, but were able to maintain opacity.

  6. Occurrence of polycyclic aromatic hydrocarbons below coal-tar-sealed parking lots and effects on stream benthic macroinvertebrate communities

    Energy Technology Data Exchange (ETDEWEB)

    Scoggins, M.; McClintock, N.L.; Gosselink, L.; Bryer, P. [City Austin, Austin, TX (United States)

    2007-12-15

    Parking-lot pavement sealants recently have been recognized as a major source of polycyclic aromatic hydrocarbons (PAHs) in urban stream sediments in Austin, Texas. Laboratory and field studies have shown that PAHs in sediments can be toxic to aquatic organisms and can degrade aquatic communities. After identifying increases in concentrations of PAHs in sediments below seal-coated parking lots, we investigated whether the increases had significant effects on stream biota in 5 Austin streams. We sampled sediment chemistry and biological communities above and below the point at which stormwater runoff from the parking lots discharged into the streams, thus providing 5 upstream reference sites and 5 downstream treatment sites. Differences between upstream and downstream concentrations of total PAH ranged from 3.9 to 32 mg/kg. Analysis of the species occurrence data from pool and riffle habitats indicated a significant decrease in community health at the downstream sites, including decreases in richness, intolerant taxa, Diptera taxa, and density. In pool sediments, Chironomidae density was negatively correlated with PAH concentrations, whereas Oligochaeta density responded positively to PAH concentrations. In general, pool taxa responded more strongly than riffle taxa to PAHs, but riffle taxa responded more broadly than pool taxa. Increases in PAH sediment-toxicity units between upstream and downstream sites explained decreases in taxon richness and density in pools between upstream and downstream sites.

  7. Degradation study of Durolon polycarbonate submitted to gamma radiation

    International Nuclear Information System (INIS)

    Miranda, A.; Sciani, V.

    1992-01-01

    The effect of gamma radiation from a cobalt 60 source in the 27000 Durolon polycarbonate irradiated with doses between 0,2 and 1000 kGy at 25 0 C was analyzed. For this reason the samples was submitted to the mechanical assay of tension, deformation and hardness and optical assay of transmittance. The obtained results show a good mechanical stability of the polycarbonate, when it was submitted to gamma irradiation in doses up to 20 kGy. (C.G.C.). 05 refs., 04 figs

  8. 31 CFR 103.81 - Submitting requests.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Submitting requests. 103.81 Section 103.81 Money and Finance: Treasury Regulations Relating to Money and Finance FINANCIAL RECORDKEEPING... which the request is made. (b) A request filed by a corporation shall be signed by a corporate officer...

  9. Magnetic response of localized spins coupled to itinerant electrons in an inhomogeneous crystal field

    International Nuclear Information System (INIS)

    Iannarella, L.; Guimaraes, A.P.; Silva, X.A. da.

    1990-01-01

    The magnetic behavior at T = O K of a system consisting of conduction electrons coupled to localized electrons, the latter submitted to an inhomogeneous crystal field distribution, is studied. The study implies that the inhomogeneity of the crystal field attenuates the quenching effects. The model is interesting to the study of disordered rare-earth intermetallic compounds. (A.C.A.S.) [pt

  10. Investigation and optimisation of a plasma cathode electron beam gun for material processing applications

    OpenAIRE

    Del Pozo Rodriguez, Sofia

    2016-01-01

    This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University London. This thesis describes design, development and testing work on a plasma cathode electron beam gun as well as plasma diagnosis experiments and Electron Beam (EB) current measurements carried out with the aim of maximising the power of the EB extracted and optimising the electron beam gun system for material processing applications. The elements which influence EB gun design are described...

  11. 40 CFR 63.8818 - What reports must I submit and when?

    Science.gov (United States)

    2010-07-01

    ... other daily calibration checks. (f) The compliance report for a new or reconstructed flame lamination... not included in the list submitted with the Notification of Compliance Status in § 63.8816(h) (1), an... approved a different schedule for submission of reports under § 63.10(a), you must submit each compliance...

  12. Exponential Smoothing for Multi-Product Lot-Sizing With Heijunka and Varying Demand

    Directory of Open Access Journals (Sweden)

    Grimaud Frédéric

    2014-06-01

    Full Text Available Here we discuss a multi-product lot-sizing problem for a job shop controlled with a heijunka box. Demand is considered as a random variable with constant variation which must be absorbed somehow by the manufacturing system, either by increased inventory or by flexibility in the production. When a heijunka concept (production leveling is used, fluctuations in customer orders are not transferred directly to the manufacturing system allowing for a smoother production and better production capacity utilization. The problem rather is to determine a tradeoff between the variability in the production line capacity requirement and the inventory level.

  13. Precipitation and runoff water quality from an urban parking lot and implications for tree growth

    Science.gov (United States)

    C. H. Pham; H. G. Halverson; G. M. Heisler

    1978-01-01

    The water quality of precipitation and runoff from a large parking lot in New Brunswick, New Jersey was studied during the early growing season, from March to June 1976. Precipitation and runoff from 10 storms were analyzed. The runoff was higher in all constituents considered except for P, Pb, and Cu. Compared with published values for natural waters, sewage effluent...

  14. A Hybrid Algorithm for Solving the Economic Lot and Delivery Scheduling Problem in the Common Cycle Case

    DEFF Research Database (Denmark)

    Ju, Suquan; Clausen, Jens

    2004-01-01

    The ELDSP problem is a combined lot sizing and sequencing problem. A supplier produces and delivers components of different component types to a consumer in batches. The task is to determine the cycle time, i.e. that time between deliveries, which minimizes the total cost per time unit. This incl......The ELDSP problem is a combined lot sizing and sequencing problem. A supplier produces and delivers components of different component types to a consumer in batches. The task is to determine the cycle time, i.e. that time between deliveries, which minimizes the total cost per time unit....... This includes the determination of the production sequence of the component types within each cycle. We investigate the computational behavior of two published algorithms, a heuristic and an optimal algorithm. With large number of component types, the optimal algorithm has long running times. We devise a hybrid...

  15. Study and impact of fast electrons diagnosed by electron cyclotron radiation on Tore-Supra tokamak

    International Nuclear Information System (INIS)

    Gomez, P.

    1999-12-01

    This thesis aims at characterizing the dynamics of fast electrons generated by the Landau absorption of the hybrid wave and studying their effects on electron cyclotron radiation. The different processes involved in the propagation and resonant absorption of the hybrid wave in plasmas are described. A method such as ray-tracing allows the characterization of the dynamics of heating but this method relies on the hypothesis of geometrical optics. Whenever absorption rate is low as it is in Tore-Supra, the hybrid wave undergoes a series of successive reflections on the edge of the plasma before being completely absorbed. These reflections generate an electromagnetic chaos in which geometrical optics hypothesis are no longer valid. A statistical treatment of the Fokker-Planck equation allows the calculation of the mean distribution function of electrons in the plasma submitted to hybrid wave. The electron cyclotron radiation is then deduced and by assuming that plasma behaves like a black body, a theoretical radiative temperature is calculated. The confrontation of this theoretical temperature profile with experimental values allows the validation of this modeling and the estimation of the effects of fast electrons on temperature measurements. (A.C.)

  16. Prevalence study of yaws in the Democratic Republic of Congo using the lot quality assurance sampling method.

    Directory of Open Access Journals (Sweden)

    Sibylle Gerstl

    Full Text Available BACKGROUND: Until the 1970s the prevalence of non-venereal trepanomatosis, including yaws, was greatly reduced after worldwide mass treatment. In 2005, cases were again reported in the Democratic Republic of the Congo. We carried out a survey to estimate the village-level prevalence of yaws in the region of Equator in the north of the country in order to define appropriate strategies to effectively treat the affected population. METHODOLOGY/PRINCIPAL FINDINGS: We designed a community-based survey using the Lot Quality Assurance Sampling method to classify the prevalence of active yaws in 14 groups of villages (lots. The classification into high, moderate, or low yaws prevalence corresponded to World Health Organization prevalence thresholds for identifying appropriate operational treatment strategies. Active yaws cases were defined by suggestive clinical signs and positive rapid plasma reagin and Treponema pallidum hemagglutination serological tests. The overall prevalence in the study area was 4.7% (95% confidence interval: 3.4-6.0. Two of 14 lots had high prevalence (>10%, three moderate prevalence (5-10% and nine low prevalence (<5%.. CONCLUSIONS/SIGNIFICANCE: Although yaws is no longer a World Health Organization priority disease, the presence of yaws in a region where it was supposed to be eradicated demonstrates the importance of continued surveillance and control efforts. Yaws should remain a public health priority in countries where previously it was known to be endemic. The integration of sensitive surveillance systems together with free access to effective treatment is recommended. As a consequence of our study results, more than 16,000 people received free treatment against yaws.

  17. 7 CFR 42.141 - Obtaining Operating Characteristic (OC) curve information for skip lot sampling and inspection.

    Science.gov (United States)

    2010-01-01

    ... Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices... sampling plan for normal condition of container inspection from Table I or Table I-A of § 42.109. (b) For a... procedures. For example, let's assume the lot size is 6,001 to 12,000 containers, and we use the single...

  18. Development of Universal Controller Architecture for SiC Based Power Electronic Building Blocks

    Science.gov (United States)

    2017-10-30

    SiC Based Power Electronic Building Blocks Award Number Title of Research 30 October 2017 SUBMITTED BY D R. HERBERT L. G INN, Pl DEPT. OF...Naval Research , Philadelphia PA, Aug. 2017. • Ginn, H.L. Bakos J., "Development of Universal Controller Architecture for SiC Based Power Electronic...Controller Implementation for MMC Converters", Workshop on Control Architectures for Modular Power Conversion Systems, Office of Naval Research , Arlington VA

  19. 75 FR 8364 - Proposed Data Collections Submitted for Public Comment and Recommendations

    Science.gov (United States)

    2010-02-24

    ... on proposed data collection projects, the Centers for Disease Control and Prevention (CDC) will... data base containing identifying death record information submitted annually to NCHS by all the State...] Proposed Data Collections Submitted for Public Comment and Recommendations In compliance with the...

  20. 30 CFR 254.7 - How do I submit my response plan to the MMS?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I submit my response plan to the MMS... do I submit my response plan to the MMS? You must submit the number of copies of your response plan that the appropriate MMS regional office requires. If you prefer to use improved information technology...

  1. In-situ infiltration performance of different permeable pavements in a employee used parking lot--A four-year study.

    Science.gov (United States)

    Kumar, Kuldip; Kozak, Joseph; Hundal, Lakhwinder; Cox, Albert; Zhang, Heng; Granato, Thomas

    2016-02-01

    Permeable pavements are being adopted as a green solution in many parts of the world to manage urban stormwater quantity and quality. This paper reports on the measured in-situ infiltration performance over a four-year period since construction and use of three permeable parking sections (permeable pavers, permeable concrete and permeable asphalt) of an employee car parking lot. There was only a marginal decline in infiltration rates of all three pavements after one year of use. However, between years two to four, the infiltration rates declined significantly due to clogging of pores either by dry deposition of particles and/or shear stress of vehicles driving and degrading the permeable surfaces; during the last two years, a greater decline was also observed in driving areas of the parking lots compared to parking slots, where minimal wear and tear are expected. Maintenance strategies were employed to reclaim some of the lost infiltration rate of the permeable pavements to limited success. Despite this decline, the infiltration rates were still four to five times higher than average rainstorm intensity in the region. Thus, these permeable pavement parking lots may have significant ecological importance due to their ability to infiltrate rainwater quickly, reduce the runoff in the catchment area, and also dampen runoff peak flows that could otherwise enter the collection system for treatment in a combined sewer area. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. 21 CFR 720.7 - Notification of person submitting cosmetic product ingredient statement.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Notification of person submitting cosmetic product... AND HUMAN SERVICES (CONTINUED) COSMETICS VOLUNTARY FILING OF COSMETIC PRODUCT INGREDIENT COMPOSITION STATEMENTS § 720.7 Notification of person submitting cosmetic product ingredient statement. When Form FDA...

  3. Why and How to Measure the Use of Electronic Resources

    Directory of Open Access Journals (Sweden)

    Jean Bernon

    2008-11-01

    Full Text Available A complete overview of library activity implies a complete and reliable measurement of the use of both electronic resources and printed materials. This measurement is based on three sets of definitions: document types, use types and user types. There is a common model of definitions for printed materials, but a lot of questions and technical issues remain for electronic resources. In 2006 a French national working group studied these questions. It relied on the COUNTER standard, but found it insufficient and pointed out the need for local tools such as web markers and deep analysis of proxy logs. Within the French national consortium COUPERIN, a new working group is testing ERMS, SUSHI standards, Shibboleth authentication, along with COUNTER standards, to improve the counting of the electronic resources use. At this stage this counting is insufficient and its improvement will be a European challenge for the future.

  4. 77 FR 56847 - Agency Information Collection Activities; Proposed Collection; Comment Request; Electronic...

    Science.gov (United States)

    2012-09-14

    ... Number 0910-0645)--Revision The SRP (formerly referred to as the MedWatch\\Plus\\ Portal and Rational Questionnaire) and the ESG are the Agency's electronic systems for collecting, submitting, and processing... ESG, approved under OMB control number 0910-0645. III. The FDA Safety Reporting Portal Rational...

  5. Comparação entre métodos para a avaliação do vigor de lotes de sementes de triticale Comparison of methods for assessing the vigor of seed lots of triticale

    Directory of Open Access Journals (Sweden)

    Fábio Steiner

    2011-02-01

    Full Text Available Dentro de um programa de controle de qualidade, a avaliação do vigor de sementes é fundamental e necessária para o sucesso da produção. Este trabalho teve como objetivo avaliar a eficiência de diferentes testes de vigor na avaliação da qualidade fisiológica de sementes de triticale (X. triticosecale Wittmack, buscando a diferenciação de lotes. Cinco lotes da cultivar 'IPR 111' foram submetidos ao teste de germinação, primeira contagem, teste de frio, condutividade elétrica (50 sementes 50mL-1 de água; 25°C 24h-1, lixiviação de potássio (50 sementes 75mL-1 de água; 25°C 3h-1, envelhecimento acelerado (43°C 48h-1 e teor de água. O teste de condutividade elétrica e lixiviação de potássio são eficientes na diferenciação do vigor de lotes de sementes de triticale.In a program of seed quality assurance, the evaluation of seed vigor is fundamental and necessary to the global production process outcome. The objective of this experiment was to verify the efficiency of different vigor tests for evaluation of triticale seeds (X. triticosecale Wittmack seeking the lots differentiation. Five lots of triticale seeds (cv. IPR 111 were submitted to the following evaluations: germination, first counting of germination test, cold test, electrical conductivity test (50 seeds into 50ml of water, at 25°C for 24 hours, accelerated aging test (43°C 48h-1 in distilled water (100% RH, and also seed water content. The test of electrical conductivity and potassium leaching was efficient to distinguish vigor of triticale.

  6. 49 CFR Appendix II to Part 805 - Employees Required To Submit Statements

    Science.gov (United States)

    2010-10-01

    ...—Employees Required To Submit Statements Statements of employment and financial interests are required of the... 49 Transportation 7 2010-10-01 2010-10-01 false Employees Required To Submit Statements II...) Office of the managing director: (1) Legislative affairs officer. (2) Program analysis officer. (d...

  7. Electron emission from materials at low excitation energies

    International Nuclear Information System (INIS)

    Urma, N.; Kijek, M.; Millar, J.J.

    1996-01-01

    Full text: An experimental system has been designed and developed with the purpose of measuring the total electron emission yield from materials at low energy excitation. In the first instance the reliability of the system was checked by measuring the total electron emission yield for a well defined surface (aluminium 99.45%). The obtained data was in the expected range given by the literature, and consequently the system will be used further for measuring the total electron yield for a range of materials with interest in the instrumentation industry. We intend to measure the total electron emission yield under electron bombardment as a function of incident electron energy up to 1200 eV, angle of incidence, state of the surface and environment to which the surface has been exposed. Dependence of emission on total electron irradiated dose is also of interest. For many practical application of the 'Secondary Electron Emission', the total electron yield is desired to be as large as possible. The above phenomenon has practical applicability in electron multiplier tube and Scanning electron microscopy - when by means of the variation of the yield of the emitted electrons one may produce visible images of small sample areas. The electron multiplier tube, is a device which utilises the above effect to detect and amplify both single particles and low currents streams of charged particles. The majority of electron tubes use electrons with low energy, hundreds of eV. Not a lot has been published in the literature about this regime and also about the emission when the impinging electrons have small energy, up to 1 KeV. The information obtained from the experimental measurements concerning the total electron emission yield is used to asses the investigated materials as a potential electron emitting surfaces or dynodes in an electron multiplier tube

  8. 28 CFR 14.4 - Administrative claims; evidence and information to be submitted.

    Science.gov (United States)

    2010-07-01

    ... bearing on either the responsibility of the United States for the death or the damages claimed. (b... submitted. (a) Death. In support of a claim based on death, the claimant may be required to submit the following evidence or information: (1) An authenticated death certificate or other competent evidence...

  9. 20 CFR 669.510 - What planning documents must an NFJP grantee submit?

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What planning documents must an NFJP grantee submit? 669.510 Section 669.510 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF... Accountability, Planning and Waiver Provision § 669.510 What planning documents must an NFJP grantee submit? Each...

  10. The acoustic climate at the rest and service areas – parking lots by the Silesian section of A4 motorway

    Directory of Open Access Journals (Sweden)

    Robert WIESZAŁA

    2012-01-01

    Full Text Available The aim of this article is to describe the state of the acoustic climate at the rest and service areas (MOPs situated by A4 motorway in Silesia The analysis includes the research results conducted at these parking lots from May till August 2010. The research was conducted with the digital noise meter, which was connected with the computer during measurement. The research results indicate the essential differences in the noise intensity between the particular rest and service area reaching up to 12 dB(A, in spite of the similar value of the traffic noise in all of the places where the research was conducted. It was assumed that the level of noise on each of the parking lots should be similar to standing norms for the recreation areas i.e. below 55 dB(A. The research conducted at 4 MOPs indicated that only at two of them, MOP Halemba and Wirek, these norms are fulfilled. The lack of the proper anti-noise protection in the form of the sound absorbing screens at the parking lots situated by the motorway causes the situation in which the level of noise at the places devoted to rest highly decreases the possibility to relax before the next stage of a journey.

  11. Optimal production lot size and reorder point of a two-stage supply chain while random demand is sensitive with sales teams' initiatives

    Science.gov (United States)

    Sankar Sana, Shib

    2016-01-01

    The paper develops a production-inventory model of a two-stage supply chain consisting of one manufacturer and one retailer to study production lot size/order quantity, reorder point sales teams' initiatives where demand of the end customers is dependent on random variable and sales teams' initiatives simultaneously. The manufacturer produces the order quantity of the retailer at one lot in which the procurement cost per unit quantity follows a realistic convex function of production lot size. In the chain, the cost of sales team's initiatives/promotion efforts and wholesale price of the manufacturer are negotiated at the points such that their optimum profits reached nearer to their target profits. This study suggests to the management of firms to determine the optimal order quantity/production quantity, reorder point and sales teams' initiatives/promotional effort in order to achieve their maximum profits. An analytical method is applied to determine the optimal values of the decision variables. Finally, numerical examples with its graphical presentation and sensitivity analysis of the key parameters are presented to illustrate more insights of the model.

  12. 40 CFR 60.2755 - When must I submit my waste management plan?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... waste management plan? You must submit the waste management plan no later than the date specified in... Compliance Times for Commercial and Industrial Solid Waste Incineration Units that Commenced Construction On...

  13. 30 CFR 250.468 - What well records am I required to submit?

    Science.gov (United States)

    2010-07-01

    ... OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations...) You must submit copies of logs or charts of electrical, radioactive, sonic, and other well-logging... drilling operations in the GOM OCS Region, you must submit form MMS-133, Well Activity Report, to the...

  14. 45 CFR 35.4 - Administrative claims; evidence and information to be submitted.

    Science.gov (United States)

    2010-10-01

    ... bearing on either the responsibility of the United States for the death or the damages claimed. (b... information to be submitted. (a) Death. In support of a claim based on death, the claimant may be required to submit the following evidence or information: (1) An authenticated death certificate or other competent...

  15. LOT Project long term test of buffer material at the Aespoe HRL

    International Nuclear Information System (INIS)

    Karnland, O.; Olsson, S.; Dueck, A.; Birgersson, M.; Nilsson, U.; Hernan-Haakansson, T.; Pedersen, K.; Eriksson, S.; Eriksen, T.; Eriksson, S.; Rosborg, B.; Muurinen, A.; Rousset, D.; Mosser-Ruck, R.; Cathelineau, M.; Villieras, F.; Pelletier, M.; Kaufold, S.; Dohrmann, R.; Fernandez, R.; Maeder, U.; Koroleva, M.

    2010-01-01

    Document available in extended abstract form only. Bentonite clay has been proposed as buffer material in several concepts for HLW repositories. The decaying spent fuel in the HLW canisters will increase temperature of the bentonite buffer. A number of laboratory test series, made by different research groups, have resulted in various bentonite alteration models. According to these models no significant alteration of the buffer is expected to take place at the prevailing physico-chemical conditions in the proposed Swedish KBS-3 repository, neither during, nor after water saturation. The ongoing LOT test series is focused on quantifying the mineralogical alteration in the buffer in a repository like environment at the Aespoe HRL. Further, buffer related processes concerning bacterial survival/activity, cation transport, and copper corrosion are studied. In total, the LOT test series includes seven test parcels, of which three are exposed to standard KBS-3 conditions and four test parcels are exposed to adverse conditions. Each test parcel contains a central Cu-tube surrounded by bentonite cylinder rings with a diameter of 30 cm, additional test material (Cu coupons, 60 Co tracers, bacteria etc) and instruments. Electrical heaters were place within the copper tube in order to simulate effect of decaying power from the spent fuel. The entire test parcels were released from the rock after the field exposure by overlapping boring and the bentonite material was analyzed with respect to: - physical properties (water content, density, swelling pressure, hydraulic conductivity, rheology); - mineralogical alteration in the bentonite; - distribution of added substances (e.g diffusional transport of 60 Co); - copper corrosion; - bacterial survival/activity. Two one year tests were started in 1996 and terminated in 1998. The results from tests and analyses are presented in SKB TR-00-22. The remaining four test parcels were installed during the fall 1999 plus one additional one

  16. A hybrid algorithm for solving the economic lot and delivery scheduling problem in the common cycle case

    DEFF Research Database (Denmark)

    Clausen, Jens; Ju, S.

    2006-01-01

    The ELDSP problem is a combined lot sizing and sequencing problem. A supplier produces and delivers components of different types to a consumer in batches. The task is to determine the cycle time, i.e., the time between deliveries, which minimizes the total cost per time unit. This includes the d...

  17. 12 CFR 793.4 - Administrative claims; evidence and information to be submitted.

    Science.gov (United States)

    2010-01-01

    ... evidence or information which may have a bearing on the responsibility of the United States for the death... GOVERNMENT Procedures § 793.4 Administrative claims; evidence and information to be submitted. (a) Death. In support of a claim based on death, the claimant may be required to submit the following evidence or...

  18. 18 CFR 154.302 - Previously submitted material.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Previously submitted material. 154.302 Section 154.302 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... concurrently with the rate change filing. There must be furnished to the Director, Office of Energy Market...

  19. Storm water runoff for the Y-12 Plant and selected parking lots

    International Nuclear Information System (INIS)

    Collins, E.T.

    1996-01-01

    A comparison of storm water runoff from the Y-12 Plant and selected employee vehicle parking lots to various industry data is provided in this document. This work is an outgrowth of and part of the continuing Non-Point Source Pollution Elimination Project that was initiated in the late 1980s. This project seeks to identify area pollution sources and remediate these areas through the Resource Conservation and Recovery Act/Comprehensive Environmental Response, Compensation, and Liability Act (RCRA/CERCLA) process as managed by the Environmental Restoration Organization staff. This work is also driven by the Clean Water Act Section 402(p) which, in part, deals with establishing a National Pollutant Discharge Elimination System (NPDES) permit for storm water discharges. Storm water data from events occurring in 1988 through 1991 were analyzed in two reports: Feasibility Study for the Best Management Practices to Control Area Source Pollution Derived from Parking Lots at the DOE Y-12 Plant, September 1992, and Feasibility Study of Best Management Practices for Non-Point Source Pollution Control at the Oak Ridge Y-12 Plant, February 1993. These data consisted of analysis of outfalls discharging to upper East Fork Poplar Creek (EFPC) within the confines of the Y-12 Plant (see Appendixes D and E). These reports identified the major characteristics of concern as copper, iron, lead, manganese, mercury, nitrate (as nitrogen), zinc, biological oxygen demand (BOD), chemical oxygen demand (COD), total suspended solids (TSS), fecal coliform, and aluminum. Specific sources of these contaminants were not identifiable because flows upstream of outfalls were not sampled. In general, many of these contaminants were a concern in many outfalls. Therefore, separate sampling exercises were executed to assist in identifying (or eliminating) specific suspected sources as areas of concern

  20. Assessment of Seed Germination and Dormancy of Thirty Seeds Lots of

    Directory of Open Access Journals (Sweden)

    H.R Ehyaee

    2012-06-01

    Full Text Available Most seeds of medicinal plants due to ecological adaptation to environmental conditions have several types of dormancy. Hence, it's necessary to recognize ecological factors that affect dormancy and provide optimum conditions for germination in medicinal plant species. Thirty seed lots were used to estimate germination and dormancy of medicinal plants. Treatments were KNO3, (2% and scarification of seeds by sand paper, hypochlorite sodium and removing the seed coat with four replicates of 25 seeds. Maximum and minimum germination observed in H2O for Digitalis purpure 100% and Saponaria officinalis 0%. In KNO3 treatment, Portulaca oleracea had the highest germination of 91% and Hyocyamus niger had no any germinated seeds. In sand paper treatment, the Saponaria officinalis and Datura stramonium had maximum, 33% and minimum 0% germination respectively.

  1. Assessment of the within- and between-lot variability of Whatman™ FTA(®) DMPK and 903(®) DBS papers and their suitability for the quantitative bioanalysis of small molecules.

    Science.gov (United States)

    Luckwell, Jacquelynn; Denniff, Philip; Capper, Stephen; Michael, Paul; Spooner, Neil; Mallender, Philip; Johnson, Barry; Clegg, Sarah; Green, Mark; Ahmad, Sheelan; Woodford, Lynsey

    2013-11-01

    To ensure that PK data generated from DBS samples are of the highest quality, it is important that the paper substrate is uniform and does not unduly contribute to variability. This study investigated any within and between lot variations for four cellulose paper types: Whatman™ FTA(®) DMPK-A, -B and -C, and 903(®) (GE Healthcare, Buckinghamshire, UK). The substrates were tested to demonstrate manufacturing reproducibility (thickness, weight, chemical coating concentration) and its effect on the size of the DBS produced, and the quantitative data derived from the bioanalysis of human DBS samples containing six compounds of varying physicochemical properties. Within and between lot variations in paper thickness, mass and chemical coating concentration were within acceptable manufacturing limits. No variation in the spot size or bioanalytical data was observed. Bioanalytical results obtained for DBS samples containing a number of analytes spanning a range of chemical space are not affected by the lot used or by the location within a lot.

  2. 78 FR 64294 - Loan Guaranty: Mandatory Electronic Delivery of Loan Files for Review

    Science.gov (United States)

    2013-10-28

    ... DEPARTMENT OF VETERANS AFFAIRS Loan Guaranty: Mandatory Electronic Delivery of Loan Files for... Affairs (VA) Loan Guaranty Service (LGY) announces a new policy with regard to lender submission of VA- guaranteed closed loan files for review. Currently, lenders can submit loan files selected for review by LGY...

  3. Tracking of Vehicle Movement on a Parking Lot Based on Video Detection

    Directory of Open Access Journals (Sweden)

    Ján HALGAŠ

    2014-06-01

    Full Text Available This article deals with topic of transport vehicles identification for dynamic and static transport based on video detection. It explains some of the technologies and approaches necessary for processing of specific image information (transport situation. The paper also describes a design of algorithm for vehicle detection on parking lot and consecutive record of trajectory into virtual environment. It shows a new approach to moving object detection (vehicles, people, and handlers on an enclosed area with emphasis on secure parking. The created application enables automatic identification of trajectory of specific objects moving within the parking area. The application was created in program language C++ with using an open source library OpenCV.

  4. 75 FR 60404 - Information Collection Request Submitted to Office of Management and Budget

    Science.gov (United States)

    2010-09-30

    ... [OMB Control Number: 3002-0003] Information Collection Request Submitted to Office of Management and... United States will submit an Information Collection Request (ICR) to the Office of Management and Budget (OMB) requesting approval for the following collection of information: 3002-0003, Substitute...

  5. Intervene before leaving: clustered lot quality assurance sampling to monitor vaccination coverage at health district level before the end of a yellow fever and measles vaccination campaign in Sierra Leone in 2009.

    Science.gov (United States)

    Pezzoli, Lorenzo; Conteh, Ishata; Kamara, Wogba; Gacic-Dobo, Marta; Ronveaux, Olivier; Perea, William A; Lewis, Rosamund F

    2012-06-07

    In November 2009, Sierra Leone conducted a preventive yellow fever (YF) vaccination campaign targeting individuals aged nine months and older in six health districts. The campaign was integrated with a measles follow-up campaign throughout the country targeting children aged 9-59 months. For both campaigns, the operational objective was to reach 95% of the target population. During the campaign, we used clustered lot quality assurance sampling (C-LQAS) to identify areas of low coverage to recommend timely mop-up actions. We divided the country in 20 non-overlapping lots. Twelve lots were targeted by both vaccinations, while eight only by measles. In each lot, five clusters of ten eligible individuals were selected for each vaccine. The upper threshold (UT) was set at 90% and the lower threshold (LT) at 75%. A lot was rejected for low vaccination coverage if more than 7 unvaccinated individuals (not presenting vaccination card) were found. After the campaign, we plotted the C-LQAS results against the post-campaign coverage estimations to assess if early interventions were successful enough to increase coverage in the lots that were at the level of rejection before the end of the campaign. During the last two days of campaign, based on card-confirmed vaccination status, five lots out of 20 (25.0%) failed for having low measles vaccination coverage and three lots out of 12 (25.0%) for low YF coverage. In one district, estimated post-campaign vaccination coverage for both vaccines was still not significantly above the minimum acceptable level (LT = 75%) even after vaccination mop-up activities. C-LQAS during the vaccination campaign was informative to identify areas requiring mop-up activities to reach the coverage target prior to leaving the region. The only district where mop-up activities seemed to be unsuccessful might have had logistical difficulties that should be further investigated and resolved.

  6. 76 FR 75894 - Information Collection Activities: Pipelines and Pipeline Rights-of-Way; Submitted for Office of...

    Science.gov (United States)

    2011-12-05

    ...) Submit repair report 3 1008(f) Submit report of pipeline failure analysis...... 30 1008(g) Submit plan of... usual and customary business practice; required burden is minimal to make available to BSEE. Estimated... and provide your total capital and startup cost components or annual operation, maintenance, and...

  7. Inorganic-organic hybrid polymer for preparation of affiliating material using electron beam irradiation

    International Nuclear Information System (INIS)

    Chung, Jaeseung; Kim, Seongeun; Kim, Byounggak; Lee, Jongchan; Park, Jihyun; Lee, Byeongcheol

    2011-01-01

    Recently, silver nano materials have gained a lot of attentions in a variety of applications due to the unique biological, optical, and electrical properties. Especially, the antifouling property of these material is considered to be an important character for biomedical field, marine coatings industry, biosensor, and drug delivery. In this study, we design and synthesize the inorganic-organic hybrid polymer for preparation of affiliating materials. Silver nano materials having antifouling property with different shapes are prepared by control the electron beam irradiation conditions. Inorganic-organic hybrid polymer was synthesized and characterized. → Morphology and size controlled nano materials are prepared using electron beam irradiation. → Silver nano materials having various shapes can be used for antifouling material

  8. REVIEW OF MOODLE PLUGINS FOR DESIGNING MULTIMEDIA ELECTRONIC EDUCATIONAL RESOURCES FROM LANGUAGE DISCIPLINES

    Directory of Open Access Journals (Sweden)

    Anton M. Avramchuk

    2015-09-01

    Full Text Available Today the problem of designing multimedia electronic educational resources from language disciplines in Moodle is very important. This system has a lot of different, powerful resources, plugins to facilitate the learning of students with language disciplines. This article presents an overview and comparative analysis of the five Moodle plugins for designing multimedia electronic educational resources from language disciplines. There have been considered their key features and functionality in order to choose the best for studying language disciplines in the Moodle. Plugins are compared by a group of experts according to the criteria: efficiency, functionality and easy use. For a comparative analysis of the plugins it is used the analytic hierarchy process.

  9. 24 CFR 3282.354 - Submittal of false information or refusal to submit information.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Submittal of false information or... ENFORCEMENT REGULATIONS Primary Inspection Agencies § 3282.354 Submittal of false information or refusal to submit information. The submittal of false information or the refusal to submit information required...

  10. 7 CFR 28.954 - Costs of submitting samples.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Costs of submitting samples. 28.954 Section 28.954 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER...

  11. Electronics: Mott Transistor: Fundamental Studies and Device Operation Mechanisms

    Science.gov (United States)

    2016-03-21

    display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS. Harvard University Office for Sponsored Programs...including journal references , in the following categories: (b) Papers published in non-peer-reviewed journals (N/A for none) 03/21/2016 03/21/2016 03...limited kinetics of electron doping in correlated oxides, Applied Physics Letters (07 2015) TOTAL: 1 Books Number of Manuscripts: Patents Submitted

  12. 3D Printing Technologies for Flexible Tactile Sensors toward Wearable Electronics and Electronic Skin

    Directory of Open Access Journals (Sweden)

    Changyong Liu

    2018-06-01

    Full Text Available 3D printing has attracted a lot of attention in recent years. Over the past three decades, various 3D printing technologies have been developed including photopolymerization-based, materials extrusion-based, sheet lamination-based, binder jetting-based, power bed fusion-based and direct energy deposition-based processes. 3D printing offers unparalleled flexibility and simplicity in the fabrication of highly complex 3D objects. Tactile sensors that emulate human tactile perceptions are used to translate mechanical signals such as force, pressure, strain, shear, torsion, bend, vibration, etc. into electrical signals and play a crucial role toward the realization of wearable electronics and electronic skin. To date, many types of 3D printing technologies have been applied in the manufacturing of various types of tactile sensors including piezoresistive, capacitive and piezoelectric sensors. This review attempts to summarize the current state-of-the-art 3D printing technologies and their applications in tactile sensors for wearable electronics and electronic skin. The applications are categorized into five aspects: 3D-printed molds for microstructuring substrate, electrodes and sensing element; 3D-printed flexible sensor substrate and sensor body for tactile sensors; 3D-printed sensing element; 3D-printed flexible and stretchable electrodes for tactile sensors; and fully 3D-printed tactile sensors. Latest advances in the fabrication of tactile sensors by 3D printing are reviewed and the advantages and limitations of various 3D printing technologies and printable materials are discussed. Finally, future development of 3D-printed tactile sensors is discussed.

  13. Exo-electrons and initiation of electric discharges

    International Nuclear Information System (INIS)

    Laube, Sylvain

    1992-01-01

    As some observations seemed to indicate that glass submitted to an electric field could be a source of electrons, and that any dielectric could play the role, this research thesis aimed at verifying this hypothesis, at least for two industrially used dielectrics (Teflon and Kapton). The author also shows the advantage which could be taken from such an emission, as well in the field of electric discharges as in the field of their applications. Electrons emitted in such conditions are herein called exo-electrons. In a first part, the author analysed the characteristic magnitudes which govern the conditions of discharge initiation, i.e. the initiation voltage and the statistic delay between the application of an electric field and the initiative occurrence. The second part presents the different measurements devices which have been designed, and the third part presents and discusses experimental results, and shows that the theoretical model is in compliance with initiation voltage measurements. As far as electron emission is concerned, a possible explication of this phenomenon is proposed [fr

  14. Evaluation of the electron beam radiation effects on the mechanical properties of the polypropylene

    International Nuclear Information System (INIS)

    Souza, Clecia M.; Moura, Esperidiana A.B.; Chinellato, Anne

    2009-01-01

    This paper studied the electron beam radiation effects on the mechanical properties of the polypropylene (PP) resin. The PP resin was submitted to 150-250 kGy radiation dose, at the dose rate of 14 kGy/s, room temperature and presence of air, using a 1.5 MeV electron accelerator. After the irradiation, the irradiated and non irradiated resin samples were submitted to the mechanical testes of traction resistance and impact Izod resistance. The results shown that the traction resistance at drainage of PP samples have not experienced significant modifications (p < 0.05) after the irradiation. However, the original PP rupture resistance (non irradiated samples) presented a gain up to 100 % as function of the applied radiation dose; the percentage of deformation in the rupture presented a reduction up to 65 % and the Izod impact resistance presented a reduction up to 70 % with the increase of the radiation dose (p < 0.05)

  15. THE INFLUENCE OF POSTHEAT TREATMENT ON FERRITE REDISTRIBUTION IN DUPLEX STEELS ELECTRON BEAM WELDS

    OpenAIRE

    Zita Iždinská; František Kolenič

    2009-01-01

    The duplex stainless steel is two-phase steel with the structure composed of austenite and ferrite with optimum austenite/ferrite proportion 50%. At present, classical arc processes for welding duplex steels are generally regarded as acceptable. On the other hand electron and laser beam welding is up to now considered less suitable for welding duplex steels. The submitted work presents the results of testing various thermal conditions at welding duplex stainless steel with electron beam. It w...

  16. EVALUASI KEBIJAKAN STRATEGI BISNIS MENGGUNAKAN MODEL JOINT ECONOMIC LOT SIZE (JELS DENGAN PERMINTAAN PROBABILISTIK (Studi Kasus di PT. Semarang Autocomp Manufacturing Indonesia

    Directory of Open Access Journals (Sweden)

    Ary Arvianto

    2012-02-01

    Full Text Available Persaingan di dunia bisnis dewasa ini tidak lagi antar perusahaan melainkan antar supply chain. PT.SAMI merupakan perusahaan yang memproduksi wiring harness yaitu suatu komponen kendaraan pengantar arus listrik dari satu bagian ke bagian lain. PT.SAMI memproduksi banyak item wirring harness untuk beberapa merek mobil yaitu Holden, Lambda, Mazda, Nissan dan Honda. Dalam menjalankan proses bisnisnya PT.SAMI mendapat pesanan dari distributor suatu  merek mobil. Tetapi masalah yang timbul sering terjadinya revisi order yaitu perubahan jumlah pemesanan oleh distributor (PT. PASI  kepada vendor sekaligus manufaktur  (PT. SAMI dalam satu periode pemesanan, sehingga dapat menyebabkan overstock maupun stockout yang menyebabkan biaya persediaan menjadi meningkat. Revisi order  akan terus terjadi mengingat perjanjian antara PT.SAMI dan distributornya dalam kasus ini adalah PT. PASI  tetap sama. Oleh karena itu perlu adanya evaluasi terhadap kebijakan proses bisnis yang dilakukan, salah satunya dengan menggunakan pendekatan model Joint Economic Lot Size (JELS. Dengan model integrasi ini diharapkan dapat mereduksi biaya persediaan gabungan  karena mencari titik optimal berdasarkan fungsi biaya kedua belah pihak. Dengan menggunakan model JELS total biaya persediaan gabungan dapat direduksi karena biaya yang timbul merupakan biaya paling kecil berdasarkan lot pengiriman (q yang optimal. Begitu juga dengan biaya persediaan di PT.SAMI dan PT.PASI  di dapat biaya yang jauh lebih rendah dibandingkan dengan melakukan pengelolaan persediaan secara konvensional. Kata kunci:  joint, lot size,  integrasi, supply chain       Competition in today's business world is no longer between companies but between supply chain. PT.SAMI is a manufacturer of wiring harness for  vehicle. PT.SAMI produces many items wirring harness for several brands such as  Holden, Lambda, Mazda, Nissan and Honda. In conducting its business process PT.SAMI get an order from a

  17. Demonstration Assessment of Light-Emitting Diode (LED) Parking Lot Lighting at T.J.Maxx in Manchester, NH Phase I

    Energy Technology Data Exchange (ETDEWEB)

    Myer, Michael; Goettel, Russell T.

    2010-06-29

    A report describing the process and results of replacing existing parking lot lighting, looking at a LED option with occupancy sensors, and conventional alternates. Criteria include payback, light levels, occupant satisfaction. This report is Phase I of II. Phase I deals with initial installation.

  18. 49 CFR 655.49 - Refusal to submit to a drug or alcohol test.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Refusal to submit to a drug or alcohol test. 655... TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PREVENTION OF ALCOHOL MISUSE AND PROHIBITED DRUG USE IN TRANSIT OPERATIONS Types of Testing § 655.49 Refusal to submit to a drug or alcohol test. (a) Each...

  19. Concentrations of Polycyclic Aromatic Hydrocarbons (PAHs) and Major and Trace Elements in Simulated Rainfall Runoff from Parking Lots, Austin, Texas, 2003

    National Research Council Canada - National Science Library

    Mahler, Barbara J; Van Metre, Peter C; Wilson, Jennifer T

    2004-01-01

    Samples of creek bed sediment collected near seal-coated parking lots in Austin, Texas, by the City of Austin during 2001-02 had unusually elevated concentrations of polycyclic aromatic hydrocarbons (PAHs...

  20. Colorimeter and scanning electron microscopy analysis of teeth submitted to internal bleaching.

    Science.gov (United States)

    Martin-Biedma, Benjamin; Gonzalez-Gonzalez, Teresa; Lopes, Manuela; Lopes, Luis; Vilar, Rui; Bahillo, José; Varela-Patiño, Purificación

    2010-02-01

    This in vitro study compared the tooth color and the ultrastructure of internal dental tissues before and after internal bleaching. Sodium perborate was placed in the pulp chamber of endodontically treated molars and sealed with intermediate restorative material. The test samples were stored in a physiologic solution, and the bleaching agent was replaced every 7 days. A control group was used. After 1 month, the colors of the test and control samples were measured with a colorimeter, and the internal surfaces were observed under field emission scanning electron microscopy (FESEM). Statistically significant differences were found between the test and control sample colors. The FESEM ultrastructure analysis of the internal enamel and dentin surfaces did not show any changes after the internal bleaching. The results of the present study show that sodium perborate is effective in bleaching nonvital teeth and does not produce ultrastructural changes in the dental tissues. Copyright 2010 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  1. Global review of health care surveys using lot quality assurance sampling (LQAS), 1984-2004.

    Science.gov (United States)

    Robertson, Susan E; Valadez, Joseph J

    2006-09-01

    We conducted a global review on the use of lot quality assurance sampling (LQAS) to assess health care services, health behaviors, and disease burden. Publications and reports on LQAS surveys were sought from Medline and five other electronic databases; the World Health Organization; the World Bank; governments, nongovernmental organizations, and individual scientists. We identified a total of 805 LQAS surveys conducted by different management groups during January 1984 through December 2004. There was a striking increase in the annual number of LQAS surveys conducted in 2000-2004 (128/year) compared with 1984-1999 (10/year). Surveys were conducted in 55 countries, and in 12 of these countries there were 10 or more LQAS surveys. Geographically, 317 surveys (39.4%) were conducted in Africa, 197 (28.5%) in the Americas, 115 (14.3%) in the Eastern Mediterranean, 114 (14.2%) in South-East Asia, 48 (6.0%) in Europe, and 14 (1.8%) in the Western Pacific. Health care parameters varied, and some surveys assessed more than one parameter. There were 320 surveys about risk factors for HIV/AIDS/sexually transmitted infections; 266 surveys on immunization coverage, 240 surveys post-disasters, 224 surveys on women's health, 142 surveys on growth and nutrition, 136 surveys on diarrheal disease control, and 88 surveys on quality management. LQAS surveys to assess disease burden included 23 neonatal tetanus mortality surveys and 12 surveys on other diseases. LQAS is a practical field method which increasingly is being applied in assessment of preventive and curative health services, and may offer new research opportunities to social scientists. When LQAS data are collected recurrently at multiple time points, they can be used to measure the spatial variation in behavior change. Such data provide insight into understanding relationships between various investments in social, human, and physical capital, and into the effectiveness of different public health strategies in achieving

  2. Intervene before leaving: clustered lot quality assurance sampling to monitor vaccination coverage at health district level before the end of a yellow fever and measles vaccination campaign in Sierra Leone in 2009

    Directory of Open Access Journals (Sweden)

    Pezzoli Lorenzo

    2012-06-01

    Full Text Available Abstract Background In November 2009, Sierra Leone conducted a preventive yellow fever (YF vaccination campaign targeting individuals aged nine months and older in six health districts. The campaign was integrated with a measles follow-up campaign throughout the country targeting children aged 9–59 months. For both campaigns, the operational objective was to reach 95% of the target population. During the campaign, we used clustered lot quality assurance sampling (C-LQAS to identify areas of low coverage to recommend timely mop-up actions. Methods We divided the country in 20 non-overlapping lots. Twelve lots were targeted by both vaccinations, while eight only by measles. In each lot, five clusters of ten eligible individuals were selected for each vaccine. The upper threshold (UT was set at 90% and the lower threshold (LT at 75%. A lot was rejected for low vaccination coverage if more than 7 unvaccinated individuals (not presenting vaccination card were found. After the campaign, we plotted the C-LQAS results against the post-campaign coverage estimations to assess if early interventions were successful enough to increase coverage in the lots that were at the level of rejection before the end of the campaign. Results During the last two days of campaign, based on card-confirmed vaccination status, five lots out of 20 (25.0% failed for having low measles vaccination coverage and three lots out of 12 (25.0% for low YF coverage. In one district, estimated post-campaign vaccination coverage for both vaccines was still not significantly above the minimum acceptable level (LT = 75% even after vaccination mop-up activities. Conclusion C-LQAS during the vaccination campaign was informative to identify areas requiring mop-up activities to reach the coverage target prior to leaving the region. The only district where mop-up activities seemed to be unsuccessful might have had logistical difficulties that should be further investigated and resolved.

  3. Infection by Cryptosporidium parvum in renal patients submitted to renal transplant or hemodialysis

    Directory of Open Access Journals (Sweden)

    Chieffi Pedro Paulo

    1998-01-01

    Full Text Available The frequency of infection by Cryptosporidium parvum was determined in two groups of renal patients submitted to immunosuppression. One group consisted of 23 renal transplanted individuals, and the other consisted of 32 patients with chronic renal insufficiency, periodically submitted to hemodialysis. A third group of 27 patients with systemic arterial hypertension, not immunosuppressed, was used as control. During a period of 18 months all the patients were submitted to faecal examination to detect C. parvum oocysts, for a total of 1 to 6 tests per patient. The results showed frequencies of C. parvum infection of 34.8%, 25% and 17.4%, respectively, for the renal transplanted group, the patients submitted to hemodialysis and the control group. Statistical analysis showed no significant differences among the three groups even though the frequency of C. parvum infection was higher in the transplanted group. However, when the number of fecal samples containing C. parvum oocysts was taken in account, a significantly higher frequency was found in the renal transplanted group.

  4. A Study on the Thermal Neutron Filter for the Irradiation of Electronic Materials at HANARO

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Seong Woo; Kim, Sung Ryul; Park, Seung Jae; Shin, Yoon Taeg; Cho, Man Soon; Cho, Kee Nam [KAERI, Daejeon (Korea, Republic of)

    2016-05-15

    The representative example is a technique of making the semiconductor with the transmutation using the pure Si. This NTD (Neutron Transmutation Doping) Si is used as a high-quality semiconductor because it has a uniform resistance. Likewise, the electronic materials are being investigated to improve the performance of material using the neutron irradiation method. The mechanism for reaction between the electronic materials and the neutrons depends on the energy of the neutron. Capturing reaction by thermal neutrons causes the transmutation and a lot of defects are made by fast neutrons. The study for the effect by such neutron energy is necessary to understand the performance improvement of the irradiated electronic materials. The thermal neutron filter was investigated to be used for the irradiation of electronic materials at HANARO. IP irradiation hole was selected and the irradiation device was designed. The analysis was conducted considering four candidate materials.

  5. Lot quality assurance sampling of sputum acid-fast bacillus smears for assessing sputum smear microscopy centers.

    Science.gov (United States)

    Selvakumar, N; Murthy, B N; Prabhakaran, E; Sivagamasundari, S; Vasanthan, Samuel; Perumal, M; Govindaraju, R; Chauhan, L S; Wares, Fraser; Santha, T; Narayanan, P R

    2005-02-01

    Assessment of 12 microscopy centers in a tuberculosis unit by blinded checking of eight sputum smears selected by using a lot quality assurance sampling (LQAS) method and by unblinded checking of all positive and five negative slides, among the slides examined in a month in a microscopy centre, revealed that the LQAS method can be implemented in the field to monitor the performance of acid-fast bacillus microscopy centers in national tuberculosis control programs.

  6. APPLICATION OF LOT QUALITY ASSURANCE SAMPLING FOR ASSESSING DISEASE CONTROL PROGRAMMES - EXAMINATION OF SOME METHODOLOGICAL ISSUES

    OpenAIRE

    T. R. RAMESH RAO

    2011-01-01

    Lot Quality Assurance Sampling (LQAS), a statistical tool in industrial setup, has been in use since 1980 for monitoring and evaluation of programs on disease control / immunization status among children / health workers performance in health system. While conducting LQAS in the field, there are occasions, even after due care of design, there are practical and methodological issues to be addressed before it is recommended for implementation and intervention. LQAS is applied under the assumpti...

  7. 18 CFR 344.2 - Manner of submitting quotations.

    Science.gov (United States)

    2010-04-01

    ... quotations. 344.2 Section 344.2 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE INTERSTATE COMMERCE ACT FILING QUOTATIONS FOR U.S. GOVERNMENT SHIPMENTS AT REDUCED RATES § 344.2 Manner of submitting quotations. (a) The quotation or tender...

  8. Analysis of suspected wildlife crimes submitted for forensic examinations in Scotland.

    Science.gov (United States)

    Millins, Caroline; Howie, Fiona; Everitt, Charles; Shand, Michael; Lamm, Catherine

    2014-09-01

    This study describes the occurrence of suspected wildlife crimes submitted for forensic examination in Scotland in 2010. The study aims were to determine which types of crimes were committed, which species were targeted, and the outcome of investigations, in order to assess the contribution of forensic examinations in the prosecution of wildlife crimes. Information on suspected wildlife crimes submitted between January 1 and December 31, 2010 to the SAC Consulting: Veterinary Services Disease Surveillance Centers, Science and Advice for Scottish Agriculture, and to the University of Glasgow, was used. The location of suspected crimes, the species targeted, cause of death, and types of the 188 submitted wildlife crimes were summarized. More information regarding cases involving birds were submitted than cases involving mammals, and included 114 raptors, 14 waterfowl, and 22 "other bird species." Mammal cases (n = 38) included 12 badgers, 8 foxes, 7 deer, 4 hares, and 7 "other mammals." The cause of death was determined in 124 suspected crimes; malicious or accidental trauma was the most likely cause of death in 72, and 33 were poisoned. Forensic evidence supporting criminal activity was found in 53 cases, and poisoning was the most frequent crime recorded. At least five individuals were successfully prosecuted, representing 2.7 % of submissions. It was challenging to track cases from submission through to prosecution and laboratories conducting forensic investigations were often not informed of the outcome of prosecutions or court decisions.

  9. Organizational matters of competition in electronic educational resources

    Directory of Open Access Journals (Sweden)

    Ирина Карловна Войтович

    2015-12-01

    Full Text Available The article examines the experience of the Udmurt State University in conducting competitions of educational publications and electronic resources. The purpose of such competitions is to provide methodological support to educational process. The main focus is on competition of electronic educational resources. The technology of such contests is discussed through detailed analysis of the main stages of the contest. It is noted that the main task of the preparatory stage of the competition is related to the development of regulations on competition and the definition of criteria for selection of the submitted works. The paper also proposes a system of evaluation criteria of electronic educational resources developed by members of the contest organizing committee and jury members. The article emphasizes the importance of not only the preparatory stages of the competition, but also measures for its completion, aimed at training teachers create quality e-learning resources.

  10. Anomalous evolution of Ar metastable density with electron density in high density Ar discharge

    International Nuclear Information System (INIS)

    Park, Min; Chang, Hong-Young; You, Shin-Jae; Kim, Jung-Hyung; Shin, Yong-Hyeon

    2011-01-01

    Recently, an anomalous evolution of argon metastable density with plasma discharge power (electron density) was reported [A. M. Daltrini, S. A. Moshkalev, T. J. Morgan, R. B. Piejak, and W. G. Graham, Appl. Phys. Lett. 92, 061504 (2008)]. Although the importance of the metastable atom and its density has been reported in a lot of literature, however, a basic physics behind the anomalous evolution of metastable density has not been clearly understood yet. In this study, we investigated a simple global model to elucidate the underlying physics of the anomalous evolution of argon metastable density with the electron density. On the basis of the proposed simple model, we reproduced the anomalous evolution of the metastable density and disclosed the detailed physics for the anomalous result. Drastic changes of dominant mechanisms for the population and depopulation processes of Ar metastable atoms with electron density, which take place even in relatively low electron density regime, is the clue to understand the result.

  11. Arterial hypertension and associated factors in patients submitted to myocardial revascularization

    Directory of Open Access Journals (Sweden)

    Flávia Cortez Colósimo

    2015-04-01

    Full Text Available OBJECTIVE To identify the prevalence of arterial hypertension and associated factors in patients submitted to myocardial revascularization. METHOD Cross-sectional study using the database of a hospital in São Paulo (SP, Brazil containing 3010 patients with coronary artery disease submitted to myocardial revascularization. A multiple logistic regression was performed to identify variables independently associated with hypertension (statistical significance: p1.3: (OR=1.37;CI:1.09-1.72. CONCLUSION A high prevalence of arterial hypertension and association with both non-modifiable and modifiable factors was observed.

  12. Stress analysis in pipelines submitted to internal pressure - and temperature transients

    International Nuclear Information System (INIS)

    Mansur, T.R.

    1981-08-01

    Experimental determination of the structural behaviour of a thermal-hydraulic loop, when submitted to simultaneous fast change of pressure and temperature, was performed. For this, electrical strain-gages were positioned at some critical points in order to measure the deformation conditions of the structure. The study of the kinetics of the deformation revealed the presence of important transient stresses, mainly from thermal origin. After this transient behaviour, the structure is submitted to a thermal stress, which is shown to be strongly dependent on the degree of restraint of the structure. (Author) [pt

  13. Intelligent optimization to integrate a plug-in hybrid electric vehicle smart parking lot with renewable energy resources and enhance grid characteristics

    International Nuclear Information System (INIS)

    Fazelpour, Farivar; Vafaeipour, Majid; Rahbari, Omid; Rosen, Marc A.

    2014-01-01

    Highlights: • The proposed algorithms handled design steps of an efficient parking lot of PHEVs. • Optimizations are performed with 1 h intervals to find optimum charging rates. • Multi-objective optimization is performed to find the optimum size and site of DG. • Optimal sizing of a PV–wind–diesel HRES is attained. • Charging rates are optimized intelligently during peak and off-peak times. - Abstract: Widespread application of plug-in hybrid electric vehicles (PHEVs) as an important part of smart grids requires drivers and power grid constraints to be satisfied simultaneously. We address these two challenges with the presence of renewable energy and charging rate optimization in the current paper. First optimal sizing and siting for installation of a distributed generation (DG) system is performed through the grid considering power loss minimization and voltage enhancement. Due to its benefits, the obtained optimum site is considered as the optimum location for constructing a movie theater complex equipped with a PHEV parking lot. To satisfy the obtained size of DG, an on-grid hybrid renewable energy system (HRES) is chosen. In the next set of optimizations, optimal sizing of the HRES is performed to minimize the energy cost and to find the best number of decision variables, which are the number of the system’s components. Eventually, considering demand uncertainties due to the unpredictability of the arrival and departure times of the vehicles, time-dependent charging rate optimizations of the PHEVs are performed in 1 h intervals for the 24-h of a day. All optimization problems are performed using genetic algorithms (GAs). The outcome of the proposed optimization sets can be considered as design steps of an efficient grid-friendly parking lot of PHEVs. The results indicate a reduction in real power losses and improvement in the voltage profile through the distribution line. They also show the competence of the utilized energy delivery method in

  14. Evolution of corrosion of MnCuP weathering steel submitted to wet/dry cyclic tests in a simulated coastal atmosphere

    International Nuclear Information System (INIS)

    Hao Long; Zhang Sixun; Dong Junhua; Ke Wei

    2012-01-01

    Highlights: ► The evolution of rust on MnCuP weathering steel submitted to a simulated coastal atmosphere has been investigated. ► The corrosion evolution of MnCuP weathering steel can be divided into two stages with distinct rust properties. ► A protective rust layer with higher amounts of α-FeOOH and lower Fe 3 O 4 forms as the corrosion proceeds. ► The rust initially enhances and then stabilizes the cathodic process, but the anodic process tends to be inhibited. - Abstract: The evolution of rust on MnCuP weathering steel submitted to a simulated coastal atmosphere was investigated by corrosion weight gain, scanning electron microscopy, X-ray diffraction, and electrochemical methods. The results indicate that the higher corrosion rate during the first stage than that during the second stage is related closely to the rust composition and electrochemical properties. The corrosion rate evolution is caused by the formation of a protective rust layer with a higher relative amount of α-FeOOH. The rust initially enhances and then stabilizes the cathodic process, but the anodic process tends to be inhibited by the protective rust layer.

  15. Desain Ilustrasi Foto Pada Baju Kaos Dengan Media Fotografi Digital Pendukung Pariwisata Budaya Di Pura Tanah Lot Dan Taman Ayun

    Directory of Open Access Journals (Sweden)

    I Made Saryana

    2018-03-01

    Full Text Available Penelitian ini bertujuan untuk mengembangkan industri kreatif dengan menerapkan fotografi digital melalui pengembangan produk instan dengan desain ilustrasi foto pada baju kaos. Pemilihan Obyek wisata Pura Tanah Lot Tabanan dan Pura Taman Ayun Badung Bali, dijadikan obyek penelitian karena obyek wisata tersebut selalu ramai dikunjungi wisatawan. Pengumpulan data dilakukan dengan observasi, wawancara dan studi pustaka. Data yang diperoleh dari hasil observasi dan wawancara dianalisis dengan menggunakan metode penciptaan seni, sehingga hasil análisis dapat dijadikan pedoman atau konsep dasar dalam pengembangan produk sovenir baju kaos. Penelitian ini dilakukan dengan (1 Mengidentifikasi berbagai jenis sovenir baju kaos yang dijual pada kawasan obyek wisata Tanah Lot Tabanan dan Pura Taman Ayun Badung Bali, baik dari bahan, desain ilustrasinya serta teknik pembuatannya. (2 Menganalisis harga, tingkat penjualan, serta bahan, desain ilustrasinya dan teknik pembuatannya.  (3. Melakukan eksperimen desain ilustrasi foto dengan fotografi digital dan pengolahan melalui komputer. (4 Pembuatan ilustrasi foto dan menerapkannya dengan fotografi dan sablon digital pada baju kaos. This research started with observation of several tourism destinations  in Bali such as Tanah Lot in Tabanan and Taman Ayun Badung. The observation is that by taking pictures of tourists and then selling it on photo printed  paper, profit margins are minimized. Furthermore, selling t-shirts as souvenirs on which the design is lacking in representation of the location show restricted and minimized monetization capabilities. Based on these observations, the researcher intends to conduct research while creating an innovative product which is capable of representing the aforementioned locations. Through implementation of digital photography and patternization modalities, designed photos can instantaneously be printed on the t-shirt, and automatically it may be worn by tourists. This

  16. Comparison of heuristics for an economic lot scheduling problem with deliberated coproduction

    Directory of Open Access Journals (Sweden)

    Pilar I. Vidal-Carreras

    2009-12-01

    Full Text Available We built on the Economic Lot Scheduling Problem Scheduling (ELSP literature by making some modifications in order to introduce new constraints which had not been thoroughly studied with a view to simulating specific real situations. Specifically, our aim is to propose and simulate different scheduling policies for a new ELSP variant: Deliberated Coproduction. This problem comprises a product system in an ELSP environment in which we may choose if more than one product can be produced on the machine at a given time. We expressly consider the option of coproducing two products whose demand is not substitutable. In order to draw conclusions, a simulation model and its results were developed in the article by employing modified Bomberger data which include two items that could be produced simultaneously.

  17. Intelligent Adjustment of Printhead Driving Waveform Parameters for 3D Electronic Printing

    Directory of Open Access Journals (Sweden)

    Lin Na

    2017-01-01

    Full Text Available In practical applications of 3D electronic printing, a major challenge is to adjust the printhead for a high print resolution and accuracy. However, an exhausting manual selective process inevitably wastes a lot of time. Therefore, in this paper, we proposed a new intelligent adjustment method, which adopts artificial bee colony algorithm to optimize the printhead driving waveform parameters for getting the desired printhead state. Experimental results show that this method can quickly and accuracy find out the suitable combination of driving waveform parameters to meet the needs of applications.

  18. Rapid assessment of antimicrobial resistance prevalence using a Lot Quality Assurance sampling approach.

    Science.gov (United States)

    van Leth, Frank; den Heijer, Casper; Beerepoot, Mariëlle; Stobberingh, Ellen; Geerlings, Suzanne; Schultsz, Constance

    2017-04-01

    Increasing antimicrobial resistance (AMR) requires rapid surveillance tools, such as Lot Quality Assurance Sampling (LQAS). LQAS classifies AMR as high or low based on set parameters. We compared classifications with the underlying true AMR prevalence using data on 1335 Escherichia coli isolates from surveys of community-acquired urinary tract infection in women, by assessing operating curves, sensitivity and specificity. Sensitivity and specificity of any set of LQAS parameters was above 99% and between 79 and 90%, respectively. Operating curves showed high concordance of the LQAS classification with true AMR prevalence estimates. LQAS-based AMR surveillance is a feasible approach that provides timely and locally relevant estimates, and the necessary information to formulate and evaluate guidelines for empirical treatment.

  19. 17 CFR 145.9 - Petition for confidential treatment of information submitted to the Commission.

    Science.gov (United States)

    2010-04-01

    ... may summarily reject the submitter's request for confidential treatment with leave to the submitter to... treatment of information submitted to the Commission. 145.9 Section 145.9 Commodity and Securities Exchanges... treatment of information submitted to the Commission. (a) Purpose. This section provides a procedure by...

  20. 78 FR 63501 - Request To Submit a Two-Part Application-Northwest Medical Isotopes, LLC

    Science.gov (United States)

    2013-10-24

    ... new accident precursors are created by allowing an applicant to submit a construction permit... certain regulatory requirements, which, if granted, would allow the submittal of a construction permit... facility applicants subject to 10 CFR 51.20(b) \\1\\ may submit the information required for a construction...

  1. Parking Lot Runoff Quality and Treatment Efficiency of a Stormwater-Filtration Device, Madison, Wisconsin, 2005-07

    Science.gov (United States)

    Horwatich, Judy A.; Bannerman, Roger T.

    2010-01-01

    To evaluate the treatment efficiency of a stormwater-filtration device (SFD) for potential use at Wisconsin Department of Transportation (WisDOT) park-and-ride facilities, a SFD was installed at an employee parking lot in downtown Madison, Wisconsin. This type of parking lot was chosen for the test site because the constituent concentrations and particle-size distributions (PSDs) were expected to be similar to those of a typical park-and-ride lot operated by WisDOT. The objective of this particular installation was to reduce loads of total suspended solids (TSS) in stormwater runoff to Lake Monona. This study also was designed to provide a range of treatment efficiencies expected for a SFD. Samples from the inlet and outlet were analyzed for 33 organic and inorganic constituents, including 18 polycyclic aromatic hydrocarbons (PAHs). Samples were also analyzed for physical properties, including PSD. Water-quality samples were collected for 51 runoff events from November 2005 to August 2007. Samples from all runoff events were analyzed for concentrations of suspended sediment (SS). Samples from 31 runoff events were analyzed for 15 constituents, samples from 15 runoff events were analyzed for PAHs, and samples from 36 events were analyzed for PSD. The treatment efficiency of the SFD was calculated using the summation of loads (SOL) and the efficiency ratio methods. Constituents for which the concentrations and (or) loads were decreased by the SFD include TSS, SS, volatile suspended solids, total phosphorous (TP), total copper, total zinc, and PAHs. The efficiency ratios for these constituents are 45, 37, 38, 55, 22, 5, and 46 percent, respectively. The SOLs for these constituents are 32, 37, 28, 36, 23, 8, and 48 percent, respectively. The SOL for chloride was -21 and the efficiency ratio was -18. Six chemical constituents or properties-dissolved phosphorus, chemical oxygen demand, dissolved zinc, total dissolved solids, dissolved chemical oxygen demand, and

  2. Lot quality assurance sampling techniques in health surveys in developing countries: advantages and current constraints.

    Science.gov (United States)

    Lanata, C F; Black, R E

    1991-01-01

    Traditional survey methods, which are generally costly and time-consuming, usually provide information at the regional or national level only. The utilization of lot quality assurance sampling (LQAS) methodology, developed in industry for quality control, makes it possible to use small sample sizes when conducting surveys in small geographical or population-based areas (lots). This article describes the practical use of LQAS for conducting health surveys to monitor health programmes in developing countries. Following a brief description of the method, the article explains how to build a sample frame and conduct the sampling to apply LQAS under field conditions. A detailed description of the procedure for selecting a sampling unit to monitor the health programme and a sample size is given. The sampling schemes utilizing LQAS applicable to health surveys, such as simple- and double-sampling schemes, are discussed. The interpretation of the survey results and the planning of subsequent rounds of LQAS surveys are also discussed. When describing the applicability of LQAS in health surveys in developing countries, the article considers current limitations for its use by health planners in charge of health programmes, and suggests ways to overcome these limitations through future research. It is hoped that with increasing attention being given to industrial sampling plans in general, and LQAS in particular, their utilization to monitor health programmes will provide health planners in developing countries with powerful techniques to help them achieve their health programme targets.

  3. A new approach for solving capacitated lot sizing and scheduling problem with sequence and period-dependent setup costs

    Directory of Open Access Journals (Sweden)

    Imen Chaieb Memmi

    2013-09-01

    Full Text Available Purpose: We aim to examine the capacitated multi-item lot sizing problem which is a typical example of a large bucket model, where many different items can be produced on the same machine in one time period. We propose a new approach to determine the production sequence and lot sizes that minimize the sum of start up and setup costs, inventory and production costs over all periods.Design/methodology/approach: The approach is composed of three steps. First, we compute a lower bound on total cost. Then we propose a three sub-steps iteration procedure. We solve optimally the lot sizing problem without considering products sequencing and their cost. Then, we determine products quantities to produce each period while minimizing the storage and variable production costs. Given the products to manufacture each period, we determine its correspondent optimal products sequencing, by using a Branch and Bound algorithm. Given the sequences of products within each period, we evaluate the total start up and setup cost. We compare then the total cost obtained to the lower bound of the total cost. If this value riches a prefixed value, we stop. Otherwise, we modify the results of lot sizing problem.Findings and Originality/value: We show using an illustrative example, that the difference between the total cost and its lower bound is only 10%. This gap depends on the significance of the inventory and production costs and the machine’s capacity. Comparing the approach we develop with a traditional one, we show that we manage to reduce the total cost by 30%.Research limitations/implications: Our model fits better to real-world situations where production systems run continuously. This model is applied for limited number of part types and periods.Practical implications: Our approach determines the products to manufacture each time period, their economic amounts, and their scheduling within each period. This outcome should help decision makers bearing expensive

  4. The surface analysis methods

    International Nuclear Information System (INIS)

    Deville, J.P.

    1998-01-01

    Nowadays, there are a lot of surfaces analysis methods, each having its specificity, its qualities, its constraints (for instance vacuum) and its limits. Expensive in time and in investment, these methods have to be used deliberately. This article appeals to non specialists. It gives some elements of choice according to the studied information, the sensitivity, the use constraints or the answer to a precise question. After having recalled the fundamental principles which govern these analysis methods, based on the interaction between radiations (ultraviolet, X) or particles (ions, electrons) with matter, two methods will be more particularly described: the Auger electron spectroscopy (AES) and x-rays photoemission spectroscopy (ESCA or XPS). Indeed, they are the most widespread methods in laboratories, the easier for use and probably the most productive for the analysis of surface of industrial materials or samples submitted to treatments in aggressive media. (O.M.)

  5. The surface analysis methods; Les methodes d`analyse des surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Deville, J.P. [Institut de Physique et Chimie, 67 - Strasbourg (France)

    1998-11-01

    Nowadays, there are a lot of surfaces analysis methods, each having its specificity, its qualities, its constraints (for instance vacuum) and its limits. Expensive in time and in investment, these methods have to be used deliberately. This article appeals to non specialists. It gives some elements of choice according to the studied information, the sensitivity, the use constraints or the answer to a precise question. After having recalled the fundamental principles which govern these analysis methods, based on the interaction between radiations (ultraviolet, X) or particles (ions, electrons) with matter, two methods will be more particularly described: the Auger electron spectroscopy (AES) and x-rays photoemission spectroscopy (ESCA or XPS). Indeed, they are the most widespread methods in laboratories, the easier for use and probably the most productive for the analysis of surface of industrial materials or samples submitted to treatments in aggressive media. (O.M.) 11 refs.

  6. Electronic structure engineering in silicene via atom substitution and a new two-dimensional Dirac structure Si3C

    Science.gov (United States)

    Yin, Na; Dai, Ying; Wei, Wei; Huang, Baibiao

    2018-04-01

    A lot of efforts have been made towards the band gap opening in two-dimensional silicene, the silicon version of graphene. In the present work, the electronic structures of single atom doped (B, N, Al and P) and codoped (B/N and Al/P) silicene monolayers are systematically examined on the base of density functional electronic calculations. Our results demonstrate that single atom doping can realize electron or hole doping in the silicene; while codoping, due to the syergistic effects, results in finite band gap in silicene at the Dirac point without significantly degrading the electronic properties. In addition, the characteristic of band gap shows dependence on the doping concentration. Importantly, we predict a new two-dimensional Dirac structure, the graphene-like Si3C, which also shows linear band dispersion relation around the Fermi level. Our results demonstrates an important perspective to engineer the electronic and optical properties of silicene.

  7. Trīsgadīgu bērnu krāsu uztveres sekmēšana tēlotājdarbībā pirmsskolā

    OpenAIRE

    Leja, Inga

    2017-01-01

    Inga Leja kvalifikācijas darbs “Trīsgadīgu bērnu krāsu uztveres sekmēšana tēlotājdarbībā pirmsskolā” izstrādāts Latvijas Universitātes Pedagoģijas, psiholoģijas un mākslas fakultātē. Pētījuma jautājums – kā tēlotājdarbībā pirmsskolā sekmējama trīsgadīgu bērnu krāsu uztvere? Darba mērķa sasniegšanai izvirzīti šādi uzdevumi: 1)Teorētiski analizēt literatūru par krāsu uztveri un to sekmēšanu 2)Teorētiski analizēt literatūru par tēlotājdarbību pirmsskolā 3)Prakstiski pārbaudīt teorētiskās atziņas...

  8. The future of electronic scholarship

    Directory of Open Access Journals (Sweden)

    Cornelius Holtorf

    2004-01-01

    Full Text Available This paper about the future of electronic scholarship takes the form of a commentary about my experiences with publishing an electronic monograph. An earlier version of that work was originally submitted to the University of Wales as a hypermedia Doctoral dissertation in archaeology. I will discuss to what extent (if any the electronic and multilinear format of my work proved valuable in challenging and advancing some foundations of current academic discourse. A key question is how academic credibility can be maintained, while at the same time pioneering some radical possibilities of electronic scholarship. It emerges that the criteria for this credibility are themselves at stake. The paper is divided into three main parts. After a short introduction , I will first review three ways in which I originally thought that the hypermedia format would allow clear benefits for academic writing and discourse, and how I see them now. They refer to intertextuality, the open-ended 'living' text, and multilinearity in writing and argument. Then I will review the main problems which I originally thought might be difficult to reconcile with contemporary academic discourse, and discuss to what extent they indeed turned out to be obstacles. These include screen reading, orientation and navigation issues, and the problem of long-term preservation. Finally, I will turn to the issue of academic publishing and how electronic scholarship may be able to help it become more satisfactory by dissolving existing ties to commercial interests.

  9. 41 CFR 105-50.402 - Reports submitted to the Office of Management and Budget.

    Science.gov (United States)

    2010-07-01

    ... Office of Management and Budget. 105-50.402 Section 105-50.402 Public Contracts and Property Management... submitted to the Office of Management and Budget. Copies of the foregoing reports will be submitted by the Administrator to the Office of Management and Budget not later than March 30 of each year. ...

  10. Further observations on comparison of immunization coverage by lot quality assurance sampling and 30 cluster sampling.

    Science.gov (United States)

    Singh, J; Jain, D C; Sharma, R S; Verghese, T

    1996-06-01

    Lot Quality Assurance Sampling (LQAS) and standard EPI methodology (30 cluster sampling) were used to evaluate immunization coverage in a Primary Health Center (PHC) where coverage levels were reported to be more than 85%. Of 27 sub-centers (lots) evaluated by LQAS, only 2 were accepted for child coverage, whereas none was accepted for tetanus toxoid (TT) coverage in mothers. LQAS data were combined to obtain an estimate of coverage in the entire population; 41% (95% CI 36-46) infants were immunized appropriately for their ages, while 42% (95% CI 37-47) of their mothers had received a second/ booster dose of TT. TT coverage in 149 contemporary mothers sampled in EPI survey was also 42% (95% CI 31-52). Although results by the two sampling methods were consistent with each other, a big gap was evident between reported coverage (in children as well as mothers) and survey results. LQAS was found to be operationally feasible, but it cost 40% more and required 2.5 times more time than the EPI survey. LQAS therefore, is not a good substitute for current EPI methodology to evaluate immunization coverage in a large administrative area. However, LQAS has potential as method to monitor health programs on a routine basis in small population sub-units, especially in areas with high and heterogeneously distributed immunization coverage.

  11. 77 FR 47915 - Wheego Electric Cars, Inc.; Grant of Petition for Temporary Exemption From the Electronic...

    Science.gov (United States)

    2012-08-10

    ...-0013] Wheego Electric Cars, Inc.; Grant of Petition for Temporary Exemption From the Electronic.... SUMMARY: This notice grants the petition of Wheego Electric Cars, Inc. (Wheego) for the temporary... procedures in 49 CFR part 555, Wheego Electric Cars, Inc. (Wheego) submitted a petition dated August 15, 2011...

  12. Lack of evidence for the presence of emerging HoBi-like viruses in North American fetal bovine serum lots.

    Science.gov (United States)

    The detection of HoBi-like virus in fetal bovine serum (FBS) labeled as United States of America (USA) origin, but packaged in Europe, raised concerns that HoBi-like virus may have entered the USA. In this study, 90 lots of FBS originating in North America (NA) were screened for pestivirus antigen ...

  13. 20 CFR 703.105 - Copies of forms of policies to be submitted with application.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Copies of forms of policies to be submitted... REGULATIONS Authorization of Insurance Carriers § 703.105 Copies of forms of policies to be submitted with... of the Office copies of the forms of policies which the applicant proposes to issue in writing...

  14. Electrons in a two-dimensions world

    International Nuclear Information System (INIS)

    Kivelson, S.; Lee, D.H.; Zhang, S.C.

    1996-01-01

    This digest paper is a presentation of the recent discoveries about the quantum Hall effect and its links with superconductivity. This effect can occur when electrons are confined inside a thin film between two semiconductor crystals and when they are cooled to a temperature close to 0 deg. K and submitted to an intense magnetic field. Electrons can propagate along the thin film plane when the magnetic field is perpendicular to this plane. When the magnetic field strength increases, a difference of potential occurs (the Hall voltage) and increases by steps inside the thin film and perpendicularly to the current. Each step is characterized by a perfect conductivity of the electrons and by a particular value of the Hall conductance. These steps correspond to fractional multiples of the quantum conductance. The paper describes first the historical aspects that led to the discovery of the quantum Hall effect. Then, this effect is explained using a model in which electrons are assimilated to composed bosons carrying a odd number of magnetic field quanta. This model is used to describe the similarities between the quantum Hall effect and the superconductivity and to draw a phase diagram of the different behaviours of electrons in a plan according to the strength of the magnetic field and to the degree of disorder inside the semiconductor crystals. This diagram show some unexpected properties of electrons which can act like a dielectric material or like a metal. (J.S.). 4 refs., 6 figs., 1 tab

  15. 78 FR 76293 - Information Collection Request Submitted to OMB for Review and Approval; Comment Request...

    Science.gov (United States)

    2013-12-17

    ... Environmental Protection Agency has submitted an information collection request (ICR), ``Performance Evaluation... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OECA-2013-0547; FRL 9903-29-OEI] Information Collection Request Submitted to OMB for Review and Approval; Comment Request; Performance Evaluation Studies on...

  16. VAT regime affecting the acquisition of electronic information sources in Slovenia and in the European Union

    Directory of Open Access Journals (Sweden)

    Tilen Mandelj

    2010-01-01

    Full Text Available Tax legislation system in the Republic of Slovenia as well as that of the European Union does not keep pace with the rapid technological development. A lot of problems arise in the field of purchasing and providing access to electronic information sources, namely electronic journals which are very important to disseminate research results. Problems arising from the application of the EC Directive 2006/112 in the Slovenian legislation system are described. The goal that the Value Added Tax (VAT would not affect the international competitiveness of the EU Member states was not met. Different levels of general and reduced tax rates and even different levels of taxation of electronic information sources put Member States in unequal positions. Tax regimes in Member States and their responses to the problem of VAT are discussed. The article shows the complexity of electronic information sources which can partly be taxed as services and party as goods in electronic form. A simulation of expenditure on electronic information sources at different tax rates and possible changes of tax legislation are presented.

  17. 49 CFR 551.63 - May a foreign manufacturer submit a designation by email or facsimile?

    Science.gov (United States)

    2010-10-01

    ... email or facsimile? 551.63 Section 551.63 Transportation Other Regulations Relating to Transportation... foreign manufacturer submit a designation by email or facsimile? No, the statute requires designation... designation documents submitted via email or facsimile, as they do not satisfy this requirement. ...

  18. Dosimetry of patients submitted to cerebral PET/CT for the diagnosis of mild cognitive impairment

    Energy Technology Data Exchange (ETDEWEB)

    Santana, Priscila do Carmo; Oliveira, Paulo Marcio Campos de; Bernardes, Felipe Dias; Mamede, Marcelo, E-mail: pridili@gmail.com [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil); Mourao, Arnaldo Prata [Centro Federal de Educacao Tecnologica de Minas Gerais (CEFET), Belo Horizonte, MG (Brazil); Silva, Teogenes Augusto da [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2014-11-15

    Objective: the present study was aimed at evaluating the effective radiation dose in patients submitted to PET/CT for the diagnosis of mild cognitive impairment. Materials and methods: TLD-100 detectors inserted into an Alderson Rando® anthropomorphic phantom were utilized to measure the absorbed dose coming from the CT imaging modality. The anthropomorphic phantoms (male and female adult versions) were submitted to the same technical protocols for patients’ images acquisition. The absorbed dose resulting from the radiopharmaceutical injection was estimated by means of the model proposed by the ICRP publication 106. Results: the effective dose in patients submitted to this diagnostic technique was approximately (5.34 ± 1.99) mSv. Conclusion: optimized protocols for calculation of radioactive activity injected into patients submitted to this diagnostic technique might contribute to reduce the effective radiation dose resulting from PET/CT in the diagnosis of mild cognitive impairment. (author)

  19. Dosimetry of patients submitted to cerebral PET/CT for the diagnosis of mild cognitive impairment

    International Nuclear Information System (INIS)

    Santana, Priscila do Carmo; Oliveira, Paulo Marcio Campos de; Bernardes, Felipe Dias; Mamede, Marcelo; Mourao, Arnaldo Prata; Silva, Teogenes Augusto da

    2014-01-01

    Objective: the present study was aimed at evaluating the effective radiation dose in patients submitted to PET/CT for the diagnosis of mild cognitive impairment. Materials and methods: TLD-100 detectors inserted into an Alderson Rando® anthropomorphic phantom were utilized to measure the absorbed dose coming from the CT imaging modality. The anthropomorphic phantoms (male and female adult versions) were submitted to the same technical protocols for patients’ images acquisition. The absorbed dose resulting from the radiopharmaceutical injection was estimated by means of the model proposed by the ICRP publication 106. Results: the effective dose in patients submitted to this diagnostic technique was approximately (5.34 ± 1.99) mSv. Conclusion: optimized protocols for calculation of radioactive activity injected into patients submitted to this diagnostic technique might contribute to reduce the effective radiation dose resulting from PET/CT in the diagnosis of mild cognitive impairment. (author)

  20. Electronic Nose Testing Procedure for the Definition of Minimum Performance Requirements for Environmental Odor Monitoring

    Directory of Open Access Journals (Sweden)

    Lidia Eusebio

    2016-09-01

    Full Text Available Despite initial enthusiasm towards electronic noses and their possible application in different fields, and quite a lot of promising results, several criticalities emerge from most published research studies, and, as a matter of fact, the diffusion of electronic noses in real-life applications is still very limited. In general, a first step towards large-scale-diffusion of an analysis method, is standardization. The aim of this paper is describing the experimental procedure adopted in order to evaluate electronic nose performances, with the final purpose of establishing minimum performance requirements, which is considered to be a first crucial step towards standardization of the specific case of electronic nose application for environmental odor monitoring at receptors. Based on the experimental results of the performance testing of a commercialized electronic nose type with respect to three criteria (i.e., response invariability to variable atmospheric conditions, instrumental detection limit, and odor classification accuracy, it was possible to hypothesize a logic that could be adopted for the definition of minimum performance requirements, according to the idea that these are technologically achievable.

  1. Reliability of electronic systems

    International Nuclear Information System (INIS)

    Roca, Jose L.

    2001-01-01

    Reliability techniques have been developed subsequently as a need of the diverse engineering disciplines, nevertheless they are not few those that think they have been work a lot on reliability before the same word was used in the current context. Military, space and nuclear industries were the first ones that have been involved in this topic, however not only in these environments it is that it has been carried out this small great revolution in benefit of the increase of the reliability figures of the products of those industries, but rather it has extended to the whole industry. The fact of the massive production, characteristic of the current industries, drove four decades ago, to the fall of the reliability of its products, on one hand, because the massively itself and, for other, to the recently discovered and even not stabilized industrial techniques. Industry should be changed according to those two new requirements, creating products of medium complexity and assuring an enough reliability appropriated to production costs and controls. Reliability began to be integral part of the manufactured product. Facing this philosophy, the book describes reliability techniques applied to electronics systems and provides a coherent and rigorous framework for these diverse activities providing a unifying scientific basis for the entire subject. It consists of eight chapters plus a lot of statistical tables and an extensive annotated bibliography. Chapters embrace the following topics: 1- Introduction to Reliability; 2- Basic Mathematical Concepts; 3- Catastrophic Failure Models; 4-Parametric Failure Models; 5- Systems Reliability; 6- Reliability in Design and Project; 7- Reliability Tests; 8- Software Reliability. This book is in Spanish language and has a potentially diverse audience as a text book from academic to industrial courses. (author)

  2. 77 FR 4623 - Wheego Electric Cars, Inc. Receipt of Petition for Temporary Exemption From the Electronic...

    Science.gov (United States)

    2012-01-30

    ...-0013] Wheego Electric Cars, Inc. Receipt of Petition for Temporary Exemption From the Electronic.... SUMMARY: In accordance with the procedures in 49 CFR part 555, Wheego Electric Cars, Inc., has petitioned... Electric Cars, Inc. (Wheego) submitted a petition dated August 15, 2011 asking the agency for a temporary...

  3. 76 FR 60124 - Tesla Motors, Inc.; Grant of Petition for Temporary Exemption From the Electronic Stability...

    Science.gov (United States)

    2011-09-28

    ...-0110] Tesla Motors, Inc.; Grant of Petition for Temporary Exemption From the Electronic Stability... notice grants the petition of Tesla Motors, Inc. (Tesla) for the temporary exemption of its Roadster... procedures in 49 CFR Part 555, Tesla Motors, Inc. (Tesla) submitted a petition dated June 7, 2011 asking the...

  4. 29 CFR 551.5 - Information to be submitted.

    Science.gov (United States)

    2010-07-01

    ... employees compensated under the plan, including information as to the types of goods delivered, their points... application of the plan which are relied upon to support a finding that the plan has the general purpose and... 29 Labor 3 2010-07-01 2010-07-01 false Information to be submitted. 551.5 Section 551.5 Labor...

  5. 30 CFR 285.601 - When am I required to submit my plans to MMS?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false When am I required to submit my plans to MMS... Information Requirements § 285.601 When am I required to submit my plans to MMS? Your plan submission...) You must provide sufficient data and information with your COP for MMS to complete the needed reviews...

  6. Extending cluster lot quality assurance sampling designs for surveillance programs.

    Science.gov (United States)

    Hund, Lauren; Pagano, Marcello

    2014-07-20

    Lot quality assurance sampling (LQAS) has a long history of applications in industrial quality control. LQAS is frequently used for rapid surveillance in global health settings, with areas classified as poor or acceptable performance on the basis of the binary classification of an indicator. Historically, LQAS surveys have relied on simple random samples from the population; however, implementing two-stage cluster designs for surveillance sampling is often more cost-effective than simple random sampling. By applying survey sampling results to the binary classification procedure, we develop a simple and flexible nonparametric procedure to incorporate clustering effects into the LQAS sample design to appropriately inflate the sample size, accommodating finite numbers of clusters in the population when relevant. We use this framework to then discuss principled selection of survey design parameters in longitudinal surveillance programs. We apply this framework to design surveys to detect rises in malnutrition prevalence in nutrition surveillance programs in Kenya and South Sudan, accounting for clustering within villages. By combining historical information with data from previous surveys, we design surveys to detect spikes in the childhood malnutrition rate. Copyright © 2014 John Wiley & Sons, Ltd.

  7. [Acceptance of lot sampling: its applicability to the evaluation of the primary care services portfolio].

    Science.gov (United States)

    López-Picazo Ferrer, J

    2001-05-15

    To determine the applicability of the acceptance of lot quality assurance sampling (LQAS) in the primary care service portfolio, comparing its results with those given by classic evaluation. Compliance with the minimum technical norms (MTN) of the service of diabetic care was evaluated through the classic methodology (confidence 95%, accuracy 5%, representativeness of area, sample of 376 histories) and by LQAS (confidence 95%, power 80%, representativeness of primary care team (PCT), defining a lot by MTN and PCT, sample of 13 histories/PCT). Effort, information obtained and its operative nature were assessed. 44 PCTs from Murcia Primary Care Region. Classic methodology: compliance with MTN ranged between 91.1% (diagnosis, 95% CI, 84.2-94.0) and 30% (repercussion in viscera, 95% CI, 25.4-34.6). Objectives in three MTN were reached (diagnosis, history and EKG). LQAS: no MTN was accepted in all the PCTs, being the most accepted (42 PCT, 95.6%) and the least accepted (24 PCT, 55.6%). In 9 PCT all were accepted (20.4%), and in 2 none were accepted (4.5%). Data were analysed through Pareto charts. Classic methodology offered accurate results, but did not identify which centres were those that did not comply (general focus). LQAS was preferable for evaluating MTN and probably coverage because: 1) it uses small samples, which foment internal quality-improvement initiatives; 2) it is easy and rapid to execute; 3) it identifies the PCT and criteria where there is an opportunity for improvement (specific focus), and 4) it can be used operatively for monitoring.

  8. 78 FR 41971 - 30-Day Notice of Proposed Information Collection: Electronic Diversity Visa Entry Form

    Science.gov (United States)

    2013-07-12

    ... Affairs at the Office of Management and Budget (OMB). You may submit comments by the following methods... from a low admission country, is a high school graduate, or has two years of experience in a job that requires two years of training. The foreign nationals complete the electronic entry forms and then...

  9. 1st International Conference on Advancements of Medical Electronics

    CERN Document Server

    Bag, Sandip; Ganguly, Karabi; Sarkar, Indranath; Biswas, Papun

    2015-01-01

    The book is a collection of peer-reviewed scientific papers submitted by active researchers in the 1st International Conference on Advancements of Medical Electronics (ICAME2015). The conference is organized jointly by the Department of Biomedical Engineering and Electronics and Communication Engineering, JIS College of Engineering, West Bengal, India. The primary objective of the conference is to strengthen interdisciplinary research and its applications for the welfare of humanity. A galaxy of academicians, professionals, scientists, statesman and researchers from different parts of the country and abroad got together and shared their knowledge. The book presents research articles of medical image processing & analysis, biomedical instrumentation & measurements, DSP & clinical applications, embedded systems & its applications in healthcare. The book can be referred as a tool for further research.

  10. 7 CFR 983.164 - Reports.

    Science.gov (United States)

    2010-01-01

    ... test failure. (b) ACP-3, Failed Lot Disposition and Rework Report. Each handler who reworks a failing... days after the rework is completed. If rework is not selected as a remedy, the handler shall submit the...

  11. Comparison of a new rapid plasma reagin card test with the standard rapid plasma reagin 18-mm circle card test and the venereal disease research laboratory slide test for serodiagnosis of syphilis.

    OpenAIRE

    Hambie, E A; Larsen, S A; Perryman, M W; Pettit, D E; Mullally, R L; Whittington, W

    1983-01-01

    The rapid plasma reagin (RPR) card test manufactured by Beckman Instruments, Inc., was compared, qualitatively and quantitatively, with the Venereal Disease Research Laboratory (VDRL) slide test and the standard RPR 18-mm circle card tests for the serodiagnosis of syphilis. Sera from 638 individuals were used in this study. Two pilot lots and two production lots of antigen were submitted by Beckman Instruments, Inc., for evaluation. Qualitative agreement among the three RPR card tests was 98....

  12. An economic lot and delivery scheduling problem with the fuzzy shelf life in a flexible job shop with unrelated parallel machines

    Directory of Open Access Journals (Sweden)

    S. Dousthaghi

    2012-08-01

    Full Text Available This paper considers an economic lot and delivery scheduling problem (ELDSP in a fuzzy environment with the fuzzy shelf life for each product. This problem is formulated in a flexible job shop with unrelated parallel machines, when the planning horizon is finite and it determines lot sizing, scheduling and sequencing, simultaneously. The proposed model of this paper is based on the basic period (BP approach. In this paper, a mixed-integer nonlinear programming (MINLP model is presented and then it is changed into two models in the fuzzy shelf life. The main model is dependent to the multiple basic periods and it is difficult to solve the resulted proposed model for large-scale problems in reasonable amount of time; thus, an efficient heuristic method is proposed to solve the problem. The performance of the proposed model is demonstrated using some numerical examples.

  13. Electronic applications presentation

    Science.gov (United States)

    Grants.gov requirement effective February 17, 2015. All initial applications submitted for competitiveawards based on solicitations issued on or after February 17, 2015 must be submitted to EPAelectronically through Grants.gov.

  14. 14 CFR 193.5 - How may I submit safety or security information and have it protected from disclosure?

    Science.gov (United States)

    2010-01-01

    ... SUBMITTED INFORMATION § 193.5 How may I submit safety or security information and have it protected from... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false How may I submit safety or security information and have it protected from disclosure? 193.5 Section 193.5 Aeronautics and Space FEDERAL AVIATION...

  15. 76 FR 47639 - Tesla Motors, Inc.; Receipt of Petition for Temporary Exemption From the Electronic Stability...

    Science.gov (United States)

    2011-08-05

    ...-0110] Tesla Motors, Inc.; Receipt of Petition for Temporary Exemption From the Electronic Stability... accordance with the procedures in 49 CFR part 555, Tesla Motors, Inc., has petitioned the agency for a... part 555, Tesla Motors, Inc. (Tesla) submitted a petition dated June 7, 2001 asking the agency for a...

  16. A STUDY OF MEASLES VACCINATION COVERAGE BY LOT QUALITY ASSURANCE SAMPLING TECHNIQUE AND FACTORS RELATED TO NON-VACCINATION IN BELLARY DISTRICT

    Directory of Open Access Journals (Sweden)

    A Karinagannanavar

    2013-12-01

    Full Text Available Background: Measles is a leading cause of childhood morbidity and mortality accounting for nearly half the global burden of vaccine preventable deaths. In 2007, there were 197000 measles deaths globally nearly 540 deaths every day or 22 deaths per hour. According to NFHS-3 2005 – 06 total measles vaccination coverage in Karnataka was 72%. Objectives: 1 To find out measles vaccination coverage in Bellary District. 2 To know the reasons for non-vaccination. Material and Methods:   A Cross sectional study was conducted from May 2010 to April 2011 at areas covered by PHC/PHU of Bellary district by using Lot Quality Assurance Sampling (LQAS method. Total sample size was 1007(53X19. Bellary district has 47 primary health centers (PHC and 6 primary health units (PHU, all of which were studied in which each PHC/PHU is considered as a lot. The data was collected from parents of children aged 12-23 months using a pretested semi structured questionnaire. Results: Out of 53 PHC’s/PHU’s we accepted 41 (77.35% and vaccination coverage in these lots was considered as more than 85% and overall coverage in Bellary district was 69.41% and  53.62% had received Vitamin A supplementation. The reasons for non vaccination were lack of awareness, ignorance, ill health of the child, fear of side effects & lack of health services. Conclusion: Measles vaccination coverage was 69.41% and the reasons for non vaccination were lack of awareness, ignorance, ill health of the child, fear of side effects and lack of health services.

  17. A STUDY OF MEASLES VACCINATION COVERAGE BY LOT QUALITY ASSURANCE SAMPLING TECHNIQUE AND FACTORS RELATED TO NON-VACCINATION IN BELLARY DISTRICT

    Directory of Open Access Journals (Sweden)

    A Karinagannanavar

    2013-09-01

    Full Text Available Background: Measles is a leading cause of childhood morbidity and mortality accounting for nearly half the global burden of vaccine preventable deaths. In 2007, there were 197000 measles deaths globally nearly 540 deaths every day or 22 deaths per hour. According to NFHS-3 2005 – 06 total measles vaccination coverage in Karnataka was 72%. Objectives: 1 To find out measles vaccination coverage in Bellary District. 2 To know the reasons for non-vaccination. Material and Methods:   A Cross sectional study was conducted from May 2010 to April 2011 at areas covered by PHC/PHU of Bellary district by using Lot Quality Assurance Sampling (LQAS method. Total sample size was 1007(53X19. Bellary district has 47 primary health centers (PHC and 6 primary health units (PHU, all of which were studied in which each PHC/PHU is considered as a lot. The data was collected from parents of children aged 12-23 months using a pretested semi structured questionnaire. Results: Out of 53 PHC’s/PHU’s we accepted 41 (77.35% and vaccination coverage in these lots was considered as more than 85% and overall coverage in Bellary district was 69.41% and  53.62% had received Vitamin A supplementation. The reasons for non vaccination were lack of awareness, ignorance, ill health of the child, fear of side effects & lack of health services. Conclusion: Measles vaccination coverage was 69.41% and the reasons for non vaccination were lack of awareness, ignorance, ill health of the child, fear of side effects and lack of health services.

  18. Developing a strategy for a regulated electronic bioanalytical laboratory.

    Science.gov (United States)

    McDowall, R D

    2014-01-01

    This perspective article considers the strategy, design and implementation of an electronic bioanalytical laboratory working to GLP and/or GCP regulations. There are a range of available automated systems and laboratory informatics that could be implemented and integrated to make an electronic laboratory. However, which are the appropriate ones to select and what is realistic and cost-effective for an individual laboratory? The answer is to develop an overall automation strategy that is updated periodically after each system or application has been implemented to assess if the strategy is still valid or needs to be changed. As many laboratory informatics applications have functional overlap or convergence, for example, Laboratory Information Management System, Electronic Laboratory Notebook, and Instrument and Chromatography Data Systems, the decision of which application performs a specific task needs to be carefully considered in the overall strategy. Ensuring data integrity and regulatory compliance, especially in light of a number of recent falsification cases, is a mandatory consideration for the overall strategy for an electronic bioanalytical laboratory submitting data to regulatory authorities.

  19. 77 FR 29360 - Used Electronic Products: An Examination of U.S. Exports Submission of Questionnaire for OMB Review

    Science.gov (United States)

    2012-05-17

    ... INTERNATIONAL TRADE COMMISSION [INVESTIGATION NO. 332-528] Used Electronic Products: An... Trade Commission. ACTION: In accordance with the provisions of the Paperwork Reduction Act of 1995 (44 U.S.C. Chapter 35), the U.S. International Trade Commission (Commission) has submitted a request for...

  20. How to submit an ATIP request | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Corporations, businesses, and organizations with a Canadian presence have the right to make an access to Information request. Please note that an applicant may be charged additional search fees and/or preparation fees in regards to a request they have submitted under the Access to Information Act.

  1. 15 CFR 711.5 - Numerical precision of submitted data.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Numerical precision of submitted data. 711.5 Section 711.5 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS...

  2. Women and Diabetes

    Medline Plus

    Full Text Available ... Submit search Popular Content Home Food Drugs Medical Devices Radiation-Emitting Products Vaccines, Blood & Biologics Animal & Veterinary ... exercising, and using FDA-approved medicines, insulin, and devices every day. FDA has lots of free information ...

  3. Electronic structure of graphene on Ni surfaces with different orientation

    International Nuclear Information System (INIS)

    Pudikov, D.A.; Zhizhin, E.V.; Rybkin, A.G.; Rybkina, A.A.; Zhukov, Y.M.; Vilkov, O. Yu.; Shikin, A.M.

    2016-01-01

    An experimental study of the graphene, synthesized by propylene cracking on Ni surfaces with different orientation: (100) and (111), using angle-resolved photoemission, has been performed. It has been shown that graphene on Ni(111) had a perfect lateral structure due to consistency of their lattices, whereas graphene/Ni(100) consisted of a lot of domains. For both systems electronic structure was quite similar and demonstrated a strong bonding of graphene to the underlying Ni surface. After Au intercalation the electronic structure of graphene in both systems was shifted to the Fermi level and became linear in the vicinity of the K point of the Brillouin zone. - Highlights: • Graphene on Ni(111) is well-ordered, whereas on Ni(100) – multi-domain. • Graphene on Ni(111) and Ni(100) is strongly bonded with substrate. • Intercalation of Au atoms restores the linearity in dispersion and makes graphene quasi-free on both Ni(100) and Ni(111).

  4. Fitness in paradise: quality of forensic reports submitted to the Hawaii judiciary.

    Science.gov (United States)

    Robinson, Richard; Acklin, Marvin W

    2010-01-01

    This paper examined quality of forensic reports submitted to the Hawaii Judiciary. Hawaii utilizes a three panel system for assessing fitness to proceed, where two psychologists and one psychiatrist submit independent reports to the Court. Utilizing a survey instrument based on previous research and nationally-derived quality standards, 150 competency to stand trial (CST) reports were examined. Reports demonstrated pervasive mediocrity with respect to quality (Mean QC=68.95, SD=15.21). One quarter (N=38) of the reports scored at or above 80% of the maximum possible score. Levels of CST agreement between evaluators and evaluators and judges were high. Report quality did not differ as a function of evaluator professional identity. Full-time employed evaluators submitted a greater number of reports above the quality criterion. For those evaluators who attended the March training, reports demonstrated significantly improved quality. Suggestions for enhancing report quality are offered with a special attention to inclusion of report elements, focus on inclusion of historical elements, and clearly described rationales supporting forensic opinions. (7664 words. Competency to stand trial, inter-rater agreement).

  5. News from the Library: Share your work, submit your thesis to CDS!

    CERN Multimedia

    CERN Library

    2011-01-01

    Are you a student paid by CERN, using CERN equipment or advised by CERN staff and you are currently writing a thesis? Then you should know that you are welcome to submit your final work to the CERN Document Server (CDS), where it will be made available by Open Access.   This is the most efficient way of sharing your work within the community - your thesis will certainly find a much greater audience than if you follow the advice of certain dubious publishing companies (see the article Free access to science... but at what cost? published in this issue). At the same time, you ensure long-term storage of your file. All theses qualify, from bachelor to PhD, and any language is accepted. You simply go to CDS and submit your work. If your thesis was written some years ago it is still not too late to submit it; it will then get a new life on CDS! More information here. CERN Theses collection here. If you have any questions or submission problems, please do not hesitate to contact Catherine Cart. ...

  6. 36 CFR 1206.86 - What additional materials must I submit with the final narrative report?

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false What additional materials must I submit with the final narrative report? 1206.86 Section 1206.86 Parks, Forests, and Public... narrative report? You must submit the materials determined by the Commission as found in the NHPRC grant...

  7. 78 FR 72099 - Agency Information Collection Activities: Submitted for Office of Management and Budget Review...

    Science.gov (United States)

    2013-12-02

    ... January 2, 2014 for the assurance of consideration. ADDRESSES: Submit comments to the Office of... submitted is subject to subsequent audit and adjustment. A. Federal Oil and Gas Valuation Regulations The... allow or not allow one or both of the relief options . . . (d) If a State decides in advance . . . that...

  8. 76 FR 65199 - International Conference on Harmonisation; E2B(R3) Electronic Transmission of Individual Case...

    Science.gov (United States)

    2011-10-20

    ... schema files and additional technical information. The draft E2B(R3) implementation guidance and BFC...: Submit written requests for single copies of the draft documents to the Division of Drug Information (HFD... or 301-827-1800. See the SUPPLEMENTARY INFORMATION section for electronic access to the draft...

  9. Standard practice for sampling special nuclear materials in multi-container lots

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1987-01-01

    1.1 This practice provides an aid in designing a sampling and analysis plan for the purpose of minimizing random error in the measurement of the amount of nuclear material in a lot consisting of several containers. The problem addressed is the selection of the number of containers to be sampled, the number of samples to be taken from each sampled container, and the number of aliquot analyses to be performed on each sample. 1.2 This practice provides examples for application as well as the necessary development for understanding the statistics involved. The uniqueness of most situations does not allow presentation of step-by-step procedures for designing sampling plans. It is recommended that a statistician experienced in materials sampling be consulted when developing such plans. 1.3 The values stated in SI units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standar...

  10. 75 FR 8390 - St. Croix River Aids to Navigation

    Science.gov (United States)

    2010-02-24

    .... Parking is provided in the main parking lot on the north side of the building. You may submit written... use only one of these five methods. Our online docket for this meeting is available on the Internet at...

  11. How can water quality be improved when the urban waste water directive has been fulfilled? A case study of the Lot river (France).

    Science.gov (United States)

    Garnier, Josette; Ramarson, Antsiva; Thieu, Vincent; Némery, Julien; Théry, Sylvain; Billen, Gilles; Coynel, Alexandra

    2018-02-15

    The Lot river, a major tributary of the downstream Garonne river, the largest river on the Northern side of the Pyrenees Mountains, was intensively studied in the 1970s. A pioneering program called "Lot Rivière Claire" provided a diagnosis of water quality at the scale of the whole watershed and proposed an ambitious program to manage nutrient pollution and eutrophication largely caused by urban wastewater releases. Later on, the implementation of European directives from 1991 to 2000 resulted in the nearly complete treatment of point sources of pollution in spite of a doubling of the basin's population. At the outlet of the Lot river, ammonium and phosphate contamination which respectively peaked to 1 mg N-NH 4 L -1 and 0.3 mg P-PO 4 L -1 in the 1980s returned to much lower levels in recent years (0.06 mg N-NH 4 L -1 and 0.02 mg P-PO 4 L -1 ), a reduction by a factor 15. However, during this time, nitrate contamination has regularly increased since the 1980s, from 0.5 to 1.2 mg N-NO 3 L -1 in average, owing to the intensification of agriculture and livestock farming. Application of the Riverstrahler model allowed us to simulate the water quality of the Lot drainage network for the 2002-2014 period. We showed that, with respect to algal requirements, phosphorus and silica are well balanced, but nitrogen remains largely in excess over phosphorus and silica. This imbalance can be problematic for the ecological status of the water bodies. Using the model, for simulating various scenarios of watershed management, we showed that improvement of urban wastewater treatment would not result in any significant change in the river's water quality. Even though arable land occupies a rather limited fraction of the watershed area, only the adoption of better farming practices or more radical changes in the agro-food system could reverse the trend of increasing nitrate contamination.

  12. Decontamination of food packaging using electron beam--status and prospects

    Energy Technology Data Exchange (ETDEWEB)

    Mittendorfer, J. E-mail: htcmitt@eunet.at; Bierbaumer, H.P.; Gratzl, F.; Kellauer, E

    2002-03-01

    In this paper the status of food packaging disinfection decontamination using electron beam at Mediscan GmbH is presented. The first section of the paper describes the activities at the service center, where food packaging materials, e.g. yoghurt cups are decontaminated in their final shipment containers. As important step in the hazard analysis and critical control point of food processing, microbiological uncontaminated food packaging material is of public interest and attracts a lot of attention from packaging material producers and food processors. The dose ranges for different sterility assurance levels are discussed and results from microbiological test are presented. Studies at Mediscan have demonstrated, that an electron beam treatment at a dose of 5-7 kGy is most effective against yeast and mold, which are mainly responsible for spoilage and short shelf-life of a variety of products. The second section is devoted to the field of inline decontamination of food packaging and sterilization of pharmaceutical packaging material and the research currently conducted at Mediscan. The requirements for industrial inline electron beam systems are summarized and design concepts discussed in terms of beam energy, beam current, irradiation topology, product handling and shielding.

  13. Decontamination of food packaging using electron beam—status and prospects

    Science.gov (United States)

    Mittendorfer, J.; Bierbaumer, H. P.; Gratzl, F.; Kellauer, E.

    2002-03-01

    In this paper the status of food packaging disinfection decontamination using electron beam at Mediscan GmbH is presented. The first section of the paper describes the activities at the service center, where food packaging materials, e.g. yoghurt cups are decontaminated in their final shipment containers. As important step in the hazard analysis and critical control point of food processing, microbiological uncontaminated food packaging material is of public interest and attracts a lot of attention from packaging material producers and food processors. The dose ranges for different sterility assurance levels are discussed and results from microbiological test are presented. Studies at Mediscan have demonstrated, that an electron beam treatment at a dose of 5-7 kGy is most effective against yeast and mold, which are mainly responsible for spoilage and short shelf-life of a variety of products. The second section is devoted to the field of inline decontamination of food packaging and sterilization of pharmaceutical packaging material and the research currently conducted at Mediscan. The requirements for industrial inline electron beam systems are summarized and design concepts discussed in terms of beam energy, beam current, irradiation topology, product handling and shielding.

  14. Decontamination of food packaging using electron beam--status and prospects

    International Nuclear Information System (INIS)

    Mittendorfer, J.; Bierbaumer, H.P.; Gratzl, F.; Kellauer, E.

    2002-01-01

    In this paper the status of food packaging disinfection decontamination using electron beam at Mediscan GmbH is presented. The first section of the paper describes the activities at the service center, where food packaging materials, e.g. yoghurt cups are decontaminated in their final shipment containers. As important step in the hazard analysis and critical control point of food processing, microbiological uncontaminated food packaging material is of public interest and attracts a lot of attention from packaging material producers and food processors. The dose ranges for different sterility assurance levels are discussed and results from microbiological test are presented. Studies at Mediscan have demonstrated, that an electron beam treatment at a dose of 5-7 kGy is most effective against yeast and mold, which are mainly responsible for spoilage and short shelf-life of a variety of products. The second section is devoted to the field of inline decontamination of food packaging and sterilization of pharmaceutical packaging material and the research currently conducted at Mediscan. The requirements for industrial inline electron beam systems are summarized and design concepts discussed in terms of beam energy, beam current, irradiation topology, product handling and shielding

  15. Electron collisions and rovibrational action spectroscopy of cold H3+ molecules

    International Nuclear Information System (INIS)

    Kreckel, H; Petrignani, A; Berg, M; Bing, D; Reinhardt, S; Altevogt, S; Buhr, H; Froese, M; Hoffmann, J; Jordon-Thaden, B; Krantz, C; Lestinsky, M; Mendes, M; Novotny, O; Novotny, S; Pedersen, H B; Orlov, D A; Mikosch, J; Wester, R; Plasil, R; GlosIk, J; Schwalm, D; Zajfman, D; Wolf, A

    2007-01-01

    Electron recombination of H 3 + has found a lot of attention due to its outstanding relevance for the chemistry of the interstellar medium (ISM) and its role as a benchmark for the treatment of dissociative recombination (DR) of polyatomic ions. We report DR measurements performed at the TSR storage ring utilizing a cryogenic ion trap injector. Furthermore, a chemical probing spectroscopy technique is described that allows for a very sensitive monitoring of the populated states inside the ion injector. Since H 3 + exists in two different nuclear spin modifications, a controlled manipulation of the ortho/para fraction is needed in order to perform state-selective measurements

  16. 76 FR 67729 - Information Collection Being Submitted for Review and Approval to the Office of Management and...

    Science.gov (United States)

    2011-11-02

    ... operators submit this form to local franchising authorities or the Commission, in situations where the FCC... changes in external costs. Cable operators submit FCC Form 1240 to their respective local franchising...

  17. Strain localization band width evolution by electronic speckle pattern interferometry strain rate measurement

    Energy Technology Data Exchange (ETDEWEB)

    Guelorget, Bruno [Institut Charles Delaunay-LASMIS, Universite de technologie de Troyes, FRE CNRS 2848, 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France)], E-mail: bruno.guelorget@utt.fr; Francois, Manuel; Montay, Guillaume [Institut Charles Delaunay-LASMIS, Universite de technologie de Troyes, FRE CNRS 2848, 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France)

    2009-04-15

    In this paper, electronic speckle pattern interferometry strain rate measurements are used to quantify the width of the strain localization band, which occurs when a sheet specimen is submitted to tension. It is shown that the width of this band decreases with increasing strain. Just before fracture, this measured width is about five times wider than the shear band and the initial sheet thickness.

  18. 13 CFR 120.830 - Reports a CDC must submit.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Reports a CDC must submit. 120.830 Section 120.830 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Development... each new associate and staff, a Statement of Personal History (for use by non-bank lenders and CDCs...

  19. 42 CFR 1008.11 - Who may submit a request.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 5 2010-10-01 2010-10-01 false Who may submit a request. 1008.11 Section 1008.11 Public Health OFFICE OF INSPECTOR GENERAL-HEALTH CARE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OIG... advisory opinion regarding an existing arrangement or one which the requestor in good faith specifically...

  20. 78 FR 63183 - Information Collection Request Submitted to OMB for Review and Approval; Comment Request; Mobile...

    Science.gov (United States)

    2013-10-23

    ... promulgated under SNAP require that Motor Vehicle Air Conditioners (MVACs) retrofitted to use a SNAP... Request Submitted to OMB for Review and Approval; Comment Request; Mobile Air Conditioner Retrofitting... Environmental Protection Agency has submitted an information collection request (ICR), Mobile Air Conditioner...

  1. Yellow fever vaccine: comparison of the neurovirulence of new 17D-204 Stamaril™ seed lots and RK 168-73 strain.

    Science.gov (United States)

    Moulin, Jean-Claude; Silvano, Jérémy; Barban, Véronique; Riou, Patrice; Allain, Caroline

    2013-07-01

    The neurovirulence of two new candidate 17D-204 Stamaril™ working seed lots and that of two reference preparations were compared. The Stamaril™ working seed lots have been used for more than twenty years for the manufacturing of vaccines of acceptable safety and efficacy. The preparation designated RK 168-73 and provided by the Robert Koch Institute was used as a reference. It was confirmed that RK 168-73 strain was not a good virus control in our study because it has a very low neurovirulence regarding both the clinical and histopathological scores in comparison with Stamaril™ strain and is not representative of a vaccine known to be satisfactory in use. The results were reinforced by the phenotypic characterization by plaque assay demonstrating that RK 168-73 was very different from the Stamaril™ vaccine, and by sequencing results showing 4 mutations between Stamaril™ and RK 168-73 viruses leading to amino acid differences in the NS4B and envelop proteins. Copyright © 2013 The International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

  2. Record Dynamics and the Parking Lot Model for granular dynamics

    Science.gov (United States)

    Sibani, Paolo; Boettcher, Stefan

    Also known for its application to granular compaction (E. Ben-Naim et al., Physica D, 1998), the Parking Lot Model (PLM) describes the random parking of identical cars in a strip with no marked bays. In the thermally activated version considered, cars can be removed at an energy cost and, in thermal equilibrium, their average density increases as temperature decreases. However, equilibration at high density becomes exceedingly slow and the system enters an aging regime induced by a kinematic constraint, the fact that parked cars may not overlap. As parking an extra car reduces the available free space,the next parking event is even harder to achieve. Records in the number of parked cars mark the salient features of the dynamics and are shown to be well described by the log-Poisson statistics known from other glassy systems with record dynamics. Clusters of cars whose positions must be rearranged to make the next insertion possible have a length scale which grows logarithmically with age, while their life-time grows exponentially with size. The implications for a recent cluster model of colloidal dynamics,(S. Boettcher and P. Sibani, J. Phys.: Cond. Matter, 2011 N. Becker et al., J. Phys.: Cond. Matter, 2014) are discussed. Support rom the Villum Foundation is gratefully acknowledged.

  3. 48 CFR 1352.213-71 - Instructions for submitting quotations under the simplified acquisition threshold-non-commercial.

    Science.gov (United States)

    2010-10-01

    ... submitting quotations under the simplified acquisition threshold-non-commercial. 1352.213-71 Section 1352.213... quotations under the simplified acquisition threshold—non-commercial. As prescribed in 48 CFR 1313.302-1-70, insert the following provision: Instructions for Submitting Quotations Under the Simplified Acquisition...

  4. 40 CFR 63.4910 - What notifications must I submit?

    Science.gov (United States)

    2010-07-01

    ..., accuracy, and completeness of the report. Such certifications must also comply with the requirements of 40... need to submit copies of any test reports. (i) Mass fraction of organic HAP for one coating, for one... mass of organic HAP contained in the waste materials for which you are claiming an allowance in...

  5. The controlled fabrication of nanopores by focused electron-beam-induced etching

    International Nuclear Information System (INIS)

    Yemini, M; Ashkenasy, N; Hadad, B; Goldner, A; Liebes, Y

    2009-01-01

    The fabrication of nanometric holes within thin silicon-based membranes is of great importance for various nanotechnology applications. The preparation of such holes with accurate control over their size and shape is, thus, gaining a lot of interest. In this work we demonstrate the use of a focused electron-beam-induced etching (FEBIE) process as a promising tool for the fabrication of such nanopores in silicon nitride membranes and study the process parameters. The reduction of silicon nitride by the electron beam followed by chemical etching of the residual elemental silicon results in a linear dependence of pore diameter on electron beam exposure time, enabling accurate control of nanopore size in the range of 17-200 nm in diameter. An optimal pressure of 5.3 x 10 -6 Torr for the production of smaller pores with faster process rates, as a result of mass transport effects, was found. The pore formation process is also shown to be dependent on the details of the pulsed process cycle, which control the rate of the pore extension, and its minimal and maximal size. Our results suggest that the FEBIE process may play a key role in the fabrication of nanopores for future devices both in sensing and nano-electronics applications.

  6. THE INFLUENCE OF POSTHEAT TREATMENT ON FERRITE REDISTRIBUTION IN DUPLEX STEELS ELECTRON BEAM WELDS

    Directory of Open Access Journals (Sweden)

    Zita Iždinská

    2009-04-01

    Full Text Available The duplex stainless steel is two-phase steel with the structure composed of austenite and ferrite with optimum austenite/ferrite proportion 50%. At present, classical arc processes for welding duplex steels are generally regarded as acceptable. On the other hand electron and laser beam welding is up to now considered less suitable for welding duplex steels. The submitted work presents the results of testing various thermal conditions at welding duplex stainless steel with electron beam. It was shown, that application of suitable postheat made possible to reduce the ferrite content in weld metal.

  7. FACTORS INLFUENCING THE ADOPTION OF ELECTRONIC WORD OF MOUTH

    Directory of Open Access Journals (Sweden)

    Mihaela ABĂLĂESEI

    2015-12-01

    Full Text Available Web-based technologies have been in a continuous state of growth, especially in the last decade, which also brought better and higher Internet speed. This has led to an increased number of opportunities for people to get involved in electronic word of mouth (e-WOM communication. E-WOM is a new means of information sharing, allowing users to be inter-connected constantly, regardless of their time zone. Because of this unique quality, e-WOM has been identified as one of the key factors affecting online sales. However, there is little known about this phenomenon. Even if the literature has approached this topic from various angles, there is still a lot of uncertainty surrounding electronic word of mouth. One of the key research questions is targeted at factors which influence people in actively engaging in creating or receiving e-WOM. With this in mind, this article provides a general overview of the key factors analyzed in the literature, which determine adoption of e-WOM by online consumers.

  8. Occurrence of enrofloxacin in overflows from animal lot and residential sewage lagoons and a receiving-stream

    Directory of Open Access Journals (Sweden)

    Abua Ikem

    2017-10-01

    Full Text Available Enrofloxacin (ENRO, a fluoroquinolone, was quantified in overflows from an animal lot and residential sewage lagoons and in a receiving-stream (Gans Creek. The concentrations of ENRO in samples was determined by high-performance liquid chromatography − tandem mass spectrometry. In total, ninety samples including duplicates were analyzed during several monthly sampling campaigns. The samples collected represented the residential sewage lagoon overflow (RLO, animal lot lagoon overflow (ALLO, the combined overflows (RLO and ALLO, and Gans Creek (upstream, midstream and downstream positions. The frequency of detection of ENRO was 90% for RLO and 100% for both ALLO and Gans Creek. The highest concentration of ENRO (0.44 μg/L was found in ALLO sample collected during high precipitation. ENRO levels found in RLO samples ranged from < LOQ to 259 ng/L and the highest value observed also coincided with high flow. The levels of ENRO found in Gans Creek ranged from 17–216 ng/L. A preliminary ecotoxicological assessment was conducted through calculation of the risk quotients (RQs for organisms based on the ratio of the measured environmental concentrations in this study to the predicted-no-effect-concentrations (acute and chronic effect data. From the RQs, high risks were observed for Microcystis aeruginosa (cyanobacteria; RQ = 4.4; Anabaena flosaquae (cyanobacteria; RQ = 1.3; and Lemna minor (aquatic vascular plant; RQ = 2.0. The long-term effects of mixtures of PHCs on Gans Creek watershed are probable. Keywords: Environmental science, Pharmaceutical chemistry, Ecology

  9. Pressure vessels supported in the soil submitted to axissymetrical loads

    International Nuclear Information System (INIS)

    Gouvea, J.P. de; Bevilacqua, L.

    1982-01-01

    A pressure vessel, spherical segment or vertical cylinder, is supported in the soil and submitted to axissymetrical loads. The soil is considered as a semi-infinite elastic solid and the support as a lattice. The method of rigidity is used. (E.G.) [pt

  10. Reduction of Aflatoxins in Apricot Kernels by Electronic and Manual Color Sorting

    OpenAIRE

    Zivoli, Rosanna; Gambacorta, Lucia; Piemontese, Luca; Solfrizzo, Michele

    2016-01-01

    The efficacy of color sorting on reducing aflatoxin levels in shelled apricot kernels was assessed. Naturally-contaminated kernels were submitted to an electronic optical sorter or blanched, peeled, and manually sorted to visually identify and sort discolored kernels (dark and spotted) from healthy ones. The samples obtained from the two sorting approaches were ground, homogenized, and analysed by HPLC-FLD for their aflatoxin content. A mass balance approach was used to measure the distributi...

  11. CATTLE PRODUCTIVE PERFORMANCE EVALUATION CONFINED SUBMITTED IMMUNOCASTRATION

    Directory of Open Access Journals (Sweden)

    J. M. Maluf

    2016-09-01

    Full Text Available In order to evaluate the performance and carcass characteristics of cattle cross breeds ½ Aberdeen Angus x ½Nelore and Nelore confined submitted to immunocastration 218 male animals were used, feedlot, averaging 342 kg, divided into three experimental groups, T1: 117 steers ½ Angus x ½ Nelore no castrated (ANC, T2: 51 Nelore steers uncastrated (NNC and T3: 50 Nellore steers immunocastrated (NIC. The experiment lasted 144 days of confinement. The selection of animals for group formation was according to the individual weight, breed, sex condition and age. For immunocastration it wasused Bopriva® vaccine. The rating was finished according to the parameter used by the meatpacking industry ranging from 1 to 5. The experimental design was completely randomized in three groups. For the analyzes the variables studied statistics were submitted to analysis of variance (ANOVA and Tukey test both at the 5% level of significance. The results showed differences (p <0.01 at various features of productive performance and carcass between treatments. For slaughter weight, the ANC animals were higher (with 582.1 kg to Nelore, regardless of sexual condition, and the NNC were in turn heavier than the NIC, 527.4 and 503.7 respectively. Finally, it observed that the use of immunocastration in Nellore animals provided a decrease in productive performance of confined animals, but provided better finish carcass similar to crossbred (ANC.

  12. 41 CFR 301-75.205 - Is the interviewee required to submit a travel claim to us?

    Science.gov (United States)

    2010-07-01

    ... required to submit a travel claim to us? 301-75.205 Section 301-75.205 Public Contracts and Property Management Federal Travel Regulation System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES AGENCY RESPONSIBILITIES 75... reimbursed, then he or she must submit a travel claim in accordance with your agency procedures in order to...

  13. 20 CFR 641.310 - May the Governor delegate responsibility for developing and submitting the State Plan?

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false May the Governor delegate responsibility for developing and submitting the State Plan? 641.310 Section 641.310 Employees' Benefits EMPLOYMENT AND TRAINING... developing and submitting the State Plan, provided that any such delegation is consistent with State law and...

  14. 24 CFR 220.821 - Items to be filed on submitting claim.

    Science.gov (United States)

    2010-04-01

    ... filed on submitting claim. Within 30 days after the filing of the notice of intention to file claim, or... principal of the mortgage indebtedness; (h) All records, ledger cards, documents, books, papers and accounts...

  15. Lot quality assurance sampling for screening communities hyperendemic for Schistosoma mansoni.

    Science.gov (United States)

    Rabarijaona, L P; Boisier, P; Ravaoalimalala, V E; Jeanne, I; Roux, J F; Jutand, M A; Salamon, R

    2003-04-01

    Lot quality assurance sampling (LQAS) was evaluated for rapid low cost identification of communities where Schistosoma mansoni infection was hyperendemic in southern Madagascar. In the study area, S. mansoni infection shows very focused and heterogeneous distribution requiring multifariousness of local surveys. One sampling plan was tested in the field with schoolchildren and several others were simulated in the laboratory. Randomization and stool specimen collection were performed by voluntary teachers under direct supervision of the study staff and no significant problem occurred. As expected from Receiver Operating Characteristic (ROC) curves, all sampling plans allowed correct identification of hyperendemic communities and of most of the hypoendemic ones. Frequent misclassifications occurred for communities with intermediate prevalence and the cheapest plans had very low specificity. The study confirmed that LQAS would be a valuable tool for large scale screening in a country with scarce financial and staff resources. Involving teachers, appeared to be quite feasible and should not lower the reliability of surveys. We recommend that the national schistosomiasis control programme systematically uses LQAS for identification of communities, provided that sample sizes are adapted to the specific epidemiological patterns of S. mansoni infection in the main regions.

  16. Electronic Cigarette: Role in the Primary Prevention of Oral Cavity Cancer.

    Science.gov (United States)

    Franco, Teresa; Trapasso, Serena; Puzzo, Lidia; Allegra, Eugenia

    2016-01-01

    Cigarette smoke has been identified as the main cause of oral cavity carcinoma. Recently, the electronic cigarette, a battery-operated device, was developed to help smokers stop their tobacco addiction. This study aimed to evaluate the safety of electronic cigarettes and to establish the possible role of such device in the primary prevention of oral cavity cancer. This study included 65 subjects who were divided into three groups (smokers, e-cigarette smokers, and nonsmokers). All subjects were submitted to cytologic examination by scraping of oral mucosa. The slides were microscopically evaluated through a micronucleus assay test. The prevalence of micronuclei was significantly decreased in the e-cigarette smoker group. There were no statistically significant differences in micronuclei distribution according to the type of cigarette, gender, and age. The use of electronic cigarettes seems to be safe for oral cells and should be suggested as an aid to smoking cessation.

  17. Acceptance rate and reasons for rejection of manuscripts submitted to Veterinary Radiology & Ultrasound during 2012.

    Science.gov (United States)

    Lamb, Christopher R; Mai, Wilfried

    2015-01-01

    Better understanding of the reasons why manuscripts are rejected, and recognition of the most frequent manuscript flaws identified by reviewers, should help submitting authors to avoid these pitfalls. Of 219 manuscripts submitted to Veterinary Radiology & Ultrasound in 2012, none (0%) was accepted without revision, four (2%) were withdrawn by the authors, 99 (45%) were accepted after revision, and 116 (53%) were rejected. All manuscripts for which minor revision was requested, and 73/86 (85%) manuscripts for which major revision was requested, were ultimately accepted. Acceptance rate was greater for retrospective studies and for manuscripts submitted from countries in which English was the primary language. The prevalences of flaws in manuscripts were poor writing (62%), deficiencies in data (60%), logical or methodological errors (28%), content not suitable for Veterinary Radiology & Ultrasound (26%), and lack of new or useful knowledge (25%). Likelihood of manuscript rejection was greater for lack of new or useful knowledge and content not suitable than for other manuscript flaws. The lower acceptance rate for manuscripts from countries in which English was not the primary language was associated with content not suitable and not poor writing. Submitting authors are encouraged to do more to recognize and address manuscript flaws before submission, for example by internal review. Specifically, submitting authors should express clearly the potential added value of their study in the introduction section of their manuscript, describe completely their methods and results, and consult the Editor-in-Chief if they are uncertain whether their subject matter would be suitable for the journal. © 2014 American College of Veterinary Radiology.

  18. Fertilizing properties of farm manure submitted to methane fermentation, according to pot tests

    Energy Technology Data Exchange (ETDEWEB)

    Kuzelewski, L; Pentkowski, A

    1962-01-01

    In order to compare the fertilizing properties of the ordinary farm manure stored and fermented in dung hills with those of the manure submitted to CH/sub 4/ fermentation, pot tests with oats and potatoes were carried out. Investigation showed that: N losses taking place during CH/sub 4/ fermentation are much smaller than those from manure fermented in dung-hills. Because of different fermentation processes, the losses of solid matter in the CH/sub 4/ fermentation were greater than in manure fermented and stored in dung-hills. Although the manure submitted to CH/sub 4/ fermentation contained more N, its effect on crops was almost identical with the effect of ordinary manure. Experiments have shown that it is not necessary to cover with soil the manure submitted to the CH/sub 4/ fermentation after spreading it. Whether it was covered with soil or not, there was no difference in crop yield. Manure fermenting in O-free atmosphere may contain products harmful to plants, but they oxidize quickly on exposure to the atmosphere. 53 references.

  19. 20 CFR 266.12 - Effect of matters or actions submitted or taken by legal guardian, etc.

    Science.gov (United States)

    2010-04-01

    ... taken by legal guardian, etc. 266.12 Section 266.12 Employees' Benefits RAILROAD RETIREMENT BOARD... submitted or taken by legal guardian, etc. All matters and actions in connection with an annuity submitted or taken by the guardian or other person legally vested with the care of the person or estate of an...

  20. Evaluating the Capability of Grass Swale for the Rainfall Runoff Reduction from an Urban Parking Lot, Seoul, Korea

    Directory of Open Access Journals (Sweden)

    Muhammad Shafique

    2018-03-01

    Full Text Available This field study elaborates the role of grass swale in the management of stormwater in an urban parking lot. Grass swale was constructed by using different vegetations and local soil media in the parking lot of Mapu-gu Seoul, Korea. In this study, rainfall runoff was first retained in soil and the vegetation layers of the grass swale, and then infiltrated rainwater was collected with the help of underground perforated pipe, and passed to an underground storage trench. In this way, grass swale detained a large amount of rainwater for a longer period of time and delayed peak discharge. In this field study, various real storm events were monitored and the research results were analyzed to evaluate the performance of grass swale for managing rainfall runoff in an urban area. From the analysis of field experiments, grass swale showed the significant rainfall runoff retention in different rain events. Grass swale markedly reduced total rainfall runoff volume and peak flow during the small storm events of intensity about 30 mm/h. From the analysis, on average rainfall runoff retention from the grass swale was found around 40 to 75% during the various small rain events. From the results, we can say that grass swale is a stormwater mitigation practice which can help avoid flash flooding problems in urban areas.

  1. Evaluating the Capability of Grass Swale for the Rainfall Runoff Reduction from an Urban Parking Lot, Seoul, Korea.

    Science.gov (United States)

    Shafique, Muhammad; Kim, Reeho; Kyung-Ho, Kwon

    2018-03-16

    This field study elaborates the role of grass swale in the management of stormwater in an urban parking lot. Grass swale was constructed by using different vegetations and local soil media in the parking lot of Mapu-gu Seoul, Korea. In this study, rainfall runoff was first retained in soil and the vegetation layers of the grass swale, and then infiltrated rainwater was collected with the help of underground perforated pipe, and passed to an underground storage trench. In this way, grass swale detained a large amount of rainwater for a longer period of time and delayed peak discharge. In this field study, various real storm events were monitored and the research results were analyzed to evaluate the performance of grass swale for managing rainfall runoff in an urban area. From the analysis of field experiments, grass swale showed the significant rainfall runoff retention in different rain events. Grass swale markedly reduced total rainfall runoff volume and peak flow during the small storm events of intensity about 30 mm/h. From the analysis, on average rainfall runoff retention from the grass swale was found around 40 to 75% during the various small rain events. From the results, we can say that grass swale is a stormwater mitigation practice which can help avoid flash flooding problems in urban areas.

  2. Evaluating the Capability of Grass Swale for the Rainfall Runoff Reduction from an Urban Parking Lot, Seoul, Korea

    Science.gov (United States)

    Shafique, Muhammad; Kim, Reeho; Kyung-Ho, Kwon

    2018-01-01

    This field study elaborates the role of grass swale in the management of stormwater in an urban parking lot. Grass swale was constructed by using different vegetations and local soil media in the parking lot of Mapu-gu Seoul, Korea. In this study, rainfall runoff was first retained in soil and the vegetation layers of the grass swale, and then infiltrated rainwater was collected with the help of underground perforated pipe, and passed to an underground storage trench. In this way, grass swale detained a large amount of rainwater for a longer period of time and delayed peak discharge. In this field study, various real storm events were monitored and the research results were analyzed to evaluate the performance of grass swale for managing rainfall runoff in an urban area. From the analysis of field experiments, grass swale showed the significant rainfall runoff retention in different rain events. Grass swale markedly reduced total rainfall runoff volume and peak flow during the small storm events of intensity about 30 mm/h. From the analysis, on average rainfall runoff retention from the grass swale was found around 40 to 75% during the various small rain events. From the results, we can say that grass swale is a stormwater mitigation practice which can help avoid flash flooding problems in urban areas. PMID:29547567

  3. 30 CFR 210.204 - How do I submit facility data?

    Science.gov (United States)

    2010-07-01

    ... 210.204 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR MINERALS REVENUE MANAGEMENT FORMS AND REPORTS Production and Royalty Reports-Solid Minerals § 210.204 How do I submit facility... stockpile inventory. (3) You must include in your facility data all production processed in the facility...

  4. Multi-scale modelling and numerical simulation of electronic kinetic transport

    International Nuclear Information System (INIS)

    Duclous, R.

    2009-11-01

    This research thesis which is at the interface between numerical analysis, plasma physics and applied mathematics, deals with the kinetic modelling and numerical simulations of the electron energy transport and deposition in laser-produced plasmas, having in view the processes of fuel assembly to temperature and density conditions necessary to ignite fusion reactions. After a brief review of the processes at play in the collisional kinetic theory of plasmas, with a focus on basic models and methods to implement, couple and validate them, the author focuses on the collective aspect related to the free-streaming electron transport equation in the non-relativistic limit as well as in the relativistic regime. He discusses the numerical development and analysis of the scheme for the Vlasov-Maxwell system, and the selection of a validation procedure and numerical tests. Then, he investigates more specific aspects of the collective transport: the multi-specie transport, submitted to phase-space discontinuities. Dealing with the multi-scale physics of electron transport with collision source terms, he validates the accuracy of a fast Monte Carlo multi-grid solver for the Fokker-Planck-Landau electron-electron collision operator. He reports realistic simulations for the kinetic electron transport in the frame of the shock ignition scheme, the development and validation of a reduced electron transport angular model. He finally explores the relative importance of the processes involving electron-electron collisions at high energy by means a multi-scale reduced model with relativistic Boltzmann terms

  5. Plagiarism in submitted manuscripts: incidence, characteristics and optimization of screening-case study in a major specialty medical journal.

    Science.gov (United States)

    Higgins, Janet R; Lin, Feng-Chang; Evans, James P

    2016-01-01

    Plagiarism is common and threatens the integrity of the scientific literature. However, its detection is time consuming and difficult, presenting challenges to editors and publishers who are entrusted with ensuring the integrity of published literature. In this study, the extent of plagiarism in manuscripts submitted to a major specialty medical journal was documented. We manually curated submitted manuscripts and deemed an article contained plagiarism if one sentence had 80 % of the words copied from another published paper. Commercial plagiarism detection software was utilized and its use was optimized. In 400 consecutively submitted manuscripts, 17 % of submissions contained unacceptable levels of plagiarized material with 82 % of plagiarized manuscripts submitted from countries where English was not an official language. Using the most commonly employed commercial plagiarism detection software, sensitivity and specificity were studied with regard to the generated plagiarism score. The cutoff score maximizing both sensitivity and specificity was 15 % (sensitivity 84.8 % and specificity 80.5 %). Plagiarism was a common occurrence among manuscripts submitted for publication to a major American specialty medical journal and most manuscripts with plagiarized material were submitted from countries in which English was not an official language. The use of commercial plagiarism detection software can be optimized by selecting a cutoff score that reflects desired sensitivity and specificity.

  6. Optimal pricing and lot-sizing decisions under Weibull distribution deterioration and trade credit policy

    Directory of Open Access Journals (Sweden)

    Manna S.K.

    2008-01-01

    Full Text Available In this paper, we consider the problem of simultaneous determination of retail price and lot-size (RPLS under the assumption that the supplier offers a fixed credit period to the retailer. It is assumed that the item in stock deteriorates over time at a rate that follows a two-parameter Weibull distribution and that the price-dependent demand is represented by a constant-price-elasticity function of retail price. The RPLS decision model is developed and solved analytically. Results are illustrated with the help of a base example. Computational results show that the supplier earns more profits when the credit period is greater than the replenishment cycle length. Sensitivity analysis of the solution to changes in the value of input parameters of the base example is also discussed.

  7. New Mathematical Model and Algorithm for Economic Lot Scheduling Problem in Flexible Flow Shop

    Directory of Open Access Journals (Sweden)

    H. Zohali

    2018-03-01

    Full Text Available This paper addresses the lot sizing and scheduling problem for a number of products in flexible flow shop with identical parallel machines. The production stages are in series, while separated by finite intermediate buffers. The objective is to minimize the sum of setup and inventory holding costs per unit of time. The available mathematical model of this problem in the literature suffers from huge complexity in terms of size and computation. In this paper, a new mixed integer linear program is developed for delay with the huge dimentions of the problem. Also, a new meta heuristic algorithm is developed for the problem. The results of the numerical experiments represent a significant advantage of the proposed model and algorithm compared with the available models and algorithms in the literature.

  8. 78 FR 72139 - Forms Submitted to the Office of Management and Budget for Extension of Clearance

    Science.gov (United States)

    2013-12-02

    ... SELECTIVE SERVICE SYSTEM Forms Submitted to the Office of Management and Budget for Extension of Clearance AGENCY: Selective Service System. ACTION: Notice. The following forms have been submitted to the Office of Management and Budget (OMB) for extension of clearance in compliance with the Paperwork Reduction Act (44 U.S.C. Chapter 35): SSS FOR...

  9. Report of the Panel on Electron Accelerator Facilities, DOE/NSF Nuclear Science Advisory Committee

    International Nuclear Information System (INIS)

    1983-04-01

    This Panel finds that the highest priority for new accelerator construction in the US nuclear physics program is for an electron accelerator of high duty factor capable of producing beams at any energy in the range from 500 to 4000 MeV. After detailed study and consideration of the proposals for such facilities submitted to it, the Panel recommends: that the proposal submitted by the Southeastern University Research Association (SURA) be accepted and funded for the construction of a new National Electron Accelerator Laboratory (NEAL) centering on a 4 GeV linear accelerator-stretcher ring system capable of delivering intense, high duty factor, electron beams in the energy range from 500 to 4000 MeV. Additional recommendations relating to this principal one are to be found in the body of this report. As modified by the Panel consequent to its own studies and analyses, the estimated cost (in 1983 dollars) of the accelerator complex is 111.8 million dollars; of the entire laboratory is 146.8 million dollars; and the operating cost averaged over the first five years of operation is 18.1 million dollars per year. The projected 15 year total cost of the project is 418.3 million dollars. The construction period is estimated to be 4.5 years. The NEAL Laboratory, from the outset will be constructed and managed as a national rather than a regional facility and will provide the United States with a truly unique facility for research in electromagnetic physics

  10. 41 CFR 105-50.401 - Reports submitted to the Congress.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Reports submitted to the Congress. 105-50.401 Section 105-50.401 Public Contracts and Property Management Federal Property... Congress. (a) The Administrator of General Services will furnish annually to the respective Committees on...

  11. 13 CFR 108.2004 - Contents of application submitted by SSBICs.

    Science.gov (United States)

    2010-01-01

    ... the amount of Regulatory Capital it intends to raise after December 21, 2000, and the amount of... MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM Requirements and Procedures for Operational Assistance Grants to... increase in its Regulatory Capital since December 21, 2000. (b) Plan. An SSBIC must submit a plan...

  12. 41 CFR 102-192.100 - How do we submit our annual mail management report to GSA?

    Science.gov (United States)

    2010-07-01

    ... management report to GSA? If your agency is a large agency, as defined in § 102-192.35, you must submit... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false How do we submit our annual mail management report to GSA? 102-192.100 Section 102-192.100 Public Contracts and Property...

  13. Design of the miniaturized free electron laser module as an efficient source of the THz waves

    International Nuclear Information System (INIS)

    Kim, Young Chul; Ahn, Seong Joon; Kim, Ho Seob; Kim, Dae-Wook; Ahn, Seungjoon

    2011-01-01

    Since the tremendous potential of the THz wave for the bio-technological applications has been found, there has been a lot of interest paid to development of the THz-wave sources. The miniaturized free electron laser (FEL) module based on the microcolumn can be a very convenient THz wave emitter because of its compactness. In this work, we tried to design the miniaturized FEL module to achieve the optimized electron beam (e-beam) trajectory in the module by using 3D simulation tool. We found that the accelerator bias, the length and radius of the limiting aperture were important parameters to obtain the strong and parallel e-beam. We have also proposed the ring-type grids to get more symmetrical behavior of the e-beam in the wiggler.

  14. Design of the miniaturized free electron laser module as an efficient source of the THz waves

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Chul [Department of Optometry, Eulji University, 212 Yangji-dong, Sujeong-gu, Seongnam-si, Gyeonggi-do 461-713 (Korea, Republic of); Ahn, Seong Joon [Department of I and C Engineering, Sun Moon University, Tangjeong-myeon, Asan-si, Chungnam 336-708 (Korea, Republic of); Kim, Ho Seob; Kim, Dae-Wook [Department of Information Display, Sun Moon University, 100 Kalsan-ri, Tangjeong-myun, Asan-si, Chungnam 336-708 (Korea, Republic of); Ahn, Seungjoon, E-mail: sjan@sunmoon.ac.kr [Department of Information Display, Sun Moon University, 100 Kalsan-ri, Tangjeong-myun, Asan-si, Chungnam 336-708 (Korea, Republic of)

    2011-10-21

    Since the tremendous potential of the THz wave for the bio-technological applications has been found, there has been a lot of interest paid to development of the THz-wave sources. The miniaturized free electron laser (FEL) module based on the microcolumn can be a very convenient THz wave emitter because of its compactness. In this work, we tried to design the miniaturized FEL module to achieve the optimized electron beam (e-beam) trajectory in the module by using 3D simulation tool. We found that the accelerator bias, the length and radius of the limiting aperture were important parameters to obtain the strong and parallel e-beam. We have also proposed the ring-type grids to get more symmetrical behavior of the e-beam in the wiggler.

  15. Thermoluminescent response of LiF: Mg, Cu, P (GR-200) below an electron beam of 6 MeV

    International Nuclear Information System (INIS)

    Torijano C, E.F.S.; Azorin N, J.; Villasenor N, I.; Lujan C, P.J.; Rivera M, T.

    2007-01-01

    Full text: In this work the experimental results of studying the thermoluminescent response (TL) of LiF:Mg,Cu,P (GR-200) previously irradiated with 6 MeV electrons are presented. The electrons beam was generated by a Lineal Accelerator VARIAN I for medical use. The lineal accelerator is installed in the General Hospital of Mexico (HGM). A lot of 25 thermoluminescent dosemeters (DTL) was used. The mass and volume of each one of them were determined. Obtaining a variation of 14% in standard deviation (SD). The DTLs were irradiated to an energy of 6 MeV. The dose given to the DTL was of 50 c Gy. The linearity of the response of the GR-200 also was determined. (Author)

  16. What makes one spread the word online - A study on electronic word of mouth motivations on social networking sites

    OpenAIRE

    Sridharan, Santhya

    2016-01-01

    Master's thesis in International hotel and tourism management The main focus of the study is to understand what motivates a person to give electronic word of mouth (eWOM) on social networking sites. With the increasing popularity of social networking sites, lots of consumers check these sites for reviews of products and services. Based on the literature review, a scale of motives that lead to giving eWOM by means of writing comments on social networking sites was developed. The study used ...

  17. 30 CFR 210.202 - How do I submit sales summaries?

    Science.gov (United States)

    2010-07-01

    ... documents from your own records. You do not need to re-format them before submitting them to us: Data... washing costs Monthly Monthly Not Required Monthly Monthly Not Required (v) Transportation costs Monthly... Management, Solid Minerals and Geothermal Compliance and Asset Management, P.O. Box 25165, MS 390G1, Denver...

  18. 13 CFR 108.2005 - Contents of plan submitted by SSBICs.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Contents of plan submitted by... Operational Assistance. The SSBIC must describe how it plans to use its grant funds to provide Operational... types of Operational Assistance it proposes to provide, and how it plans to provide the Operational...

  19. 77 FR 56265 - Proposed Information Collection Submitted to the Office of Management and Budget (OMB); Request...

    Science.gov (United States)

    2012-09-12

    ... address listed above. Follow the online instructions for accessing the dockets. SUPPLEMENTARY INFORMATION: Title: Recruitment of human subjects for observational experiments regarding keyless ignition controls... parking lot using face-to-face recruitment of participants. Before these experiments are conducted...

  20. Tape transfer printing of a liquid metal alloy for stretchable RF electronics.

    Science.gov (United States)

    Jeong, Seung Hee; Hjort, Klas; Wu, Zhigang

    2014-09-03

    In order to make conductors with large cross sections for low impedance radio frequency (RF) electronics, while still retaining high stretchability, liquid-alloy-based microfluidic stretchable electronics offers stretchable electronic systems the unique opportunity to combine various sensors on our bodies or organs with high-quality wireless communication with the external world (devices/systems), without sacrificing enhanced user comfort. This microfluidic approach, based on printed circuit board technology, allows large area processing of large cross section conductors and robust contacts, which can handle a lot of stretching between the embedded rigid active components and the surrounding system. Although it provides such benefits, further development is needed to realize its potential as a high throughput, cost-effective process technology. In this paper, tape transfer printing is proposed to supply a rapid prototyping batch process at low cost, albeit at a low resolution of 150 μm. In particular, isolated patterns can be obtained in a simple one-step process. Finally, a stretchable radio frequency identification (RFID) tag is demonstrated. The measured results show the robustness of the hybrid integrated system when the tag is stretched at 50% for 3000 cycles.

  1. Tape Transfer Printing of a Liquid Metal Alloy for Stretchable RF Electronics

    Directory of Open Access Journals (Sweden)

    Seung Hee Jeong

    2014-09-01

    Full Text Available In order to make conductors with large cross sections for low impedance radio frequency (RF electronics, while still retaining high stretchability, liquid-alloy-based microfluidic stretchable electronics offers stretchable electronic systems the unique opportunity to combine various sensors on our bodies or organs with high-quality wireless communication with the external world (devices/systems, without sacrificing enhanced user comfort. This microfluidic approach, based on printed circuit board technology, allows large area processing of large cross section conductors and robust contacts, which can handle a lot of stretching between the embedded rigid active components and the surrounding system. Although it provides such benefits, further development is needed to realize its potential as a high throughput, cost-effective process technology. In this paper, tape transfer printing is proposed to supply a rapid prototyping batch process at low cost, albeit at a low resolution of 150 μm. In particular, isolated patterns can be obtained in a simple one-step process. Finally, a stretchable radio frequency identification (RFID tag is demonstrated. The measured results show the robustness of the hybrid integrated system when the tag is stretched at 50% for 3000 cycles.

  2. Electronic Repositories of Marked Student Work and their Contributions to Formative Evaluation

    Directory of Open Access Journals (Sweden)

    Eva Heinrich

    2004-07-01

    Full Text Available The educational literature shows that formative assessment is highly conducive to learning. The tasks given to students in formative assessment generally require open-ended responses that can be given, for example, in essay-type format and that are assessed by a human marker. An essential component is the formative feedback provided by the marker that needs to assist the student in recognising knowledge gaps and in formulating steps to close these gaps. The concepts of ‘electronic repositories of marked student work’ introduced in this article suggests an approach to support learning from formative assessment. At the core of this concept lies the realisation that the artefacts submitted by students and assessed by markers are a valuable resource. This resource should not just be used by the submitting students but should be made accessible to future students studying the same concepts. These students can learn from the artefacts and the formative feedback attached to these artefacts. Self- and peer-assessment, important concepts closely linked to formative assessment, can be integrated with the repositories to develop the students’ subject knowledge, to enhance their critical thinking skills and to familiarise them with assessment procedures. This article develops the concepts of electronic repositories of marked student work. Special emphasis is put on reviewing the educational literature on formative assessment and on binding the concepts introduced into the literature findings.

  3. Experimental test on aluminium rod submitted to a laminar water flow

    International Nuclear Information System (INIS)

    Britto Aghina, L.O. de; Cruz, J.R.B.

    1986-06-01

    The result obtained from a experiment with an aluminium rod submitted to a laminar water flow is compared to the result predicted by empirical correlations used in the vibration analysis of the RPR reactor fuel rods. (L.C.J.A.)

  4. Use of Occupancy Sensors in LED Parking Lot and Garage Applications: Early Experiences

    Energy Technology Data Exchange (ETDEWEB)

    Kinzey, Bruce R.; Myer, Michael; Royer, Michael P.; Sullivan, Greg P.

    2012-11-07

    Occupancy sensor systems are gaining traction as an effective technological approach to reducing energy use in exterior commercial lighting applications. Done correctly, occupancy sensors can substantially enhance the savings from an already efficient lighting system. However, this technology is confronted by several potential challenges and pitfalls that can leave a significant amount of the prospective savings on the table. This report describes anecdotal experiences from field installations of occupancy sensor controlled light-emitting diode (LED) lighting at two parking structures and two parking lots. The relative levels of success at these installations reflect a marked range of potential outcomes: from an additional 76% in energy savings to virtually no additional savings. Several issues that influenced savings were encountered in these early stage installations and are detailed in the report. Ultimately, care must be taken in the design, selection, and commissioning of a sensor-controlled lighting installation, else the only guaranteed result may be its cost.

  5. Cell-mediated and humoral immune responses induced by scarification vaccination of human volunteers with a new lot of the live vaccine strain of Francisella tularensis.

    Science.gov (United States)

    Waag, D M; Galloway, A; Sandstrom, G; Bolt, C R; England, M J; Nelson, G O; Williams, J C

    1992-01-01

    Tularemia is a disease caused by the facultative intracellular bacterium Francisella tularensis. We evaluated a new lot of live F. tularensis vaccine for its immunogenicity in human volunteers. Scarification vaccination induced humoral and cell-mediated immune responses. Indications of a positive immune response after vaccination included an increase in specific antibody levels, which were measured by enzyme-linked immunosorbent and immunoblot assays, and the ability of peripheral blood lymphocytes to respond to whole F. tularensis bacteria as recall antigens. Vaccination caused a significant rise (P less than 0.05) in immunoglobulin A (IgA), IgG, and IgM titers. Lymphocyte stimulation indices were significantly increased (P less than 0.01) in vaccinees 14 days after vaccination. These data verify that this new lot of live F. tularensis vaccine is immunogenic. Images PMID:1400988

  6. Electronic Cigarette: Role in the Primary Prevention of Oral Cavity Cancer

    Directory of Open Access Journals (Sweden)

    Teresa Franco

    2016-01-01

    Full Text Available Background Cigarette smoke has been identified as the main cause of oral cavity carcinoma. Recently, the electronic cigarette, a battery-operated device, was developed to help smokers stop their tobacco addiction. This study aimed to evaluate the safety of electronic cigarettes and to establish the possible role of such device in the primary prevention of oral cavity cancer. Subjects and Methods This study included 65 subjects who were divided into three groups (smokers, e-cigarette smokers, and nonsmokers. All subjects were submitted to cytologic examination by scraping of oral mucosa. The slides were microscopically evaluated through a micronucleus assay test. Results The prevalence of micronuclei was significantly decreased in the e-cigarette smoker group. There were no statistically significant differences in micronuclei distribution according to the type of cigarette, gender, and age. Conclusions The use of electronic cigarettes seems to be safe for oral cells and should be suggested as an aid to smoking cessation.

  7. Lot quality assurance sampling for monitoring immunization programmes: cost-efficient or quick and dirty?

    Science.gov (United States)

    Sandiford, P

    1993-09-01

    In recent years Lot quality assurance sampling (LQAS), a method derived from production-line industry, has been advocated as an efficient means to evaluate the coverage rates achieved by child immunization programmes. This paper examines the assumptions on which LQAS is based and the effect that these assumptions have on its utility as a management tool. It shows that the attractively low sample sizes used in LQAS are achieved at the expense of specificity unless unrealistic assumptions are made about the distribution of coverage rates amongst the immunization programmes to which the method is applied. Although it is a very sensitive test and its negative predictive value is probably high in most settings, its specificity and positive predictive value are likely to be low. The implications of these strengths and weaknesses with regard to management decision-making are discussed.

  8. Mineralogy of the A2 test parcel bentonite lot project at Aespoe HRL

    International Nuclear Information System (INIS)

    Olsson, Siv; Karnland, Ola

    2010-01-01

    Document available in extended abstract form only. The ongoing LOT test series at the Aespoe Hard Rock Laboratory in Sweden is focused on quantifying the mineralogical alteration in the buffer in a repository-like environment. The LOT A2 test parcel was exposed to temperatures up to 130 deg. C for almost 6 years. The parcel was retrieved in 2006 and the bentonite has thereafter been analyzed and tested. The chemical and mineralogical characteristics of bentonite from defined positions in the parcel were compared with reference materials. The aim of the study was to elucidate how the bentonite has altered. The present study concern two bentonite blocks from the hottest section and one block from the cool section of the test parcel. The entire volume of the two warm blocks 09 and 11 was exposed to temperatures > 80 deg. C, and the innermost 4 centimeters to temperatures exceeding 100 deg. C. Block no. 33 was never exposed to temperatures exceeding 30 deg. C, apart from the innermost centimeter. The blocks were sampled contiguously at five positions along the radius from the warm copper tube to the rock. Both the bulk material and the clay fraction of the bentonite samples have been analyzed. The chemical composition of the reference and the parcel bentonite was determined by ICP emission spectrometry (AES) and ICP mass spectrometry (MS). Total carbon and sulfur were determined by evolved gas analysis (EGA). Carbonate carbon was determined as CO 2 evolved on treatment with hot 15% HCl. Prior to the chemical analysis of the clay fractions, carbonates were removed by treatment with an acetic acid-sodium acetate buffer with pH 5. The purified clay was thereafter converted to homo-ionic Na-clay by repeated washings with 1 M NaCl solution and excess salts were removed by repeated centrifuge-washing with water followed by dialysis. The cation exchange capacity (CEC) of bulk materials and of clay fractions was determined by exchange with copper-(II)- triethylene

  9. A user equilibrium, traffic assignment model of network route and parking lot choice, with search circuits and cruising flows

    OpenAIRE

    LEURENT, Fabien; BOUJNAH, Houda

    2014-01-01

    The paper provides a novel network model of parking and route choice. Parking supply is represented by parking type, management strategy including the fare, capacity and occupancy rate of parking lot, and network location, in relation to access routes along the roadway network. Trip demand is segmented according to origin-destination pair, the disposal of private parking facilities and the individual preferences for parking quality of service. Each traveller is assumed to make a two stage cho...

  10. Characterization of tomato apical stunt viroid isolated from a 24-year old seed lot of Capsicum annuum.

    Science.gov (United States)

    Verhoeven, J Th J; Koenraadt, H M S; Westenberg, M; Roenhorst, J W

    2017-06-01

    Tomato apical stunt viroid (TASVd) has been identified in a 24-year old seed lot of Capsicum annuum produced in Taiwan. It is the first finding of TASVd in this plant species. The isolate could be discriminated from all reported isolates of TASVd based on its nucleotide sequence, which showed only 94.8% identity with the most related genotype of TASVd. This discrimination was substantiated by phylogenetic analysis. Inoculation of a RNA extract of contaminated seeds to healthy pepper plants showed that the infectivity of the viroid had remained over time. Nevertheless, no transmission to seedlings was observed.

  11. The ALICE Dimuon Trigger Overview and Electronics Prototypes

    CERN Document Server

    Arnaldi, R; Barret, V; Bastid, N; Blanchard, G; Chiavassa, E; Cortese, P; Crochet, Philippe; Dellacasa, G; De Marco, N; Drancourt, C; Dupieux, P; Espagnon, B; Fargeix, J; Ferretti, A; Gallio, M; Genoux-Lubain, A; Lamoine, L; Lefèvre, F; Luquin, Lionel; Manso, F; Métivier, V; Musso, A; Oppedisano, C; Piccotti, A; Royer, L; Roig, O; Rosnet, P; Scalas, E; Scomparin, E; Vercellin, Ermanno

    2000-01-01

    Presentation made at RPC99 and submitted to NIM ALICE is the LHC experiment (2005) dedicated to the study of heavy ion collisions. Amongst the ALICE sub-detectors, the muon spectrometer will investigate the dimuon production from heavy resonance (J/psi, Gamma) decays, which is believed to be a promising signature of the QGP (Quark Gluon Plasma) formation.For maximum efficiency of the spectrometer, a dedicated dimuon trigger is presently built. The detector partis itself based on RPCs operated in streamer mode and is the topic of another contribution to this conference. This paper gives the principle and the simulated performances of the trigger and is also focussed on the description of the electronics prototypes and future developments. The RPCs are read-out by X and Y orthogonal strips: the front-end chips are presently developed. The signals are sent to the trigger electronics which basically performs a pt cut on the tracks to reduce the background. A prototype of fast (decision time 200 ns) programmable e...

  12. AlGaN/GaN heterostructures with an AlGaN layer grown directly on reactive-ion-etched GaN showing a high electron mobility (>1300 cm2 V-1 s-1)

    Science.gov (United States)

    Yamamoto, Akio; Makino, Shinya; Kanatani, Keito; Kuzuhara, Masaaki

    2018-04-01

    In this study, the metal-organic-vapor-phase-epitaxial growth behavior and electrical properties of AlGaN/GaN structures prepared by the growth of an AlGaN layer on a reactive-ion-etched (RIE) GaN surface without regrown GaN layers were investigated. The annealing of RIE-GaN surfaces in NH3 + H2 atmosphere, employed immediately before AlGaN growth, was a key process in obtaining a clean GaN surface for AlGaN growth, that is, in obtaining an electron mobility as high as 1350 cm2 V-1 s-1 in a fabricated AlGaN/RIE-GaN structure. High-electron-mobility transistors (HEMTs) were successfully fabricated with AlGaN/RIE-GaN wafers. With decreasing density of dotlike defects observed on the surfaces of AlGaN/RIE-GaN wafers, both two-dimensional electron gas properties of AlGaN/RIE-GaN structures and DC characteristics of HEMTs were markedly improved. Since dotlike defect density was markedly dependent on RIE lot, rather than on growth lot, surface contaminations of GaN during RIE were believed to be responsible for the formation of dotlike defects and, therefore, for the inferior electrical properties.

  13. Development toward rapid and efficient screening for high performance hydrolysate lots in a recombinant monoclonal antibody manufacturing process.

    Science.gov (United States)

    Luo, Ying; Pierce, Karisa M

    2012-07-01

    Plant-derived hydrolysates are widely used in mammalian cell culture media to increase yields of recombinant proteins and monoclonal antibodies (mAbs). However, these chemically varied and undefined raw materials can have negative impact on yield and/or product quality in large-scale cell culture processes. Traditional methods that rely on fractionation of hydrolysates yielded little success in improving hydrolysate quality. We took a holistic approach to develop an efficient and reliable method to screen intact soy hydrolysate lots for commercial recombinant mAb manufacturing. Combined high-resolution (1) H nuclear magnetic resonance (NMR) spectroscopy and partial least squares (PLS) analysis led to a prediction model between product titer and NMR fingerprinting of soy hydrolysate with cross-validated correlation coefficient R(2) of 0.87 and root-mean-squared-error of cross-validation RMSECV% of 11.2%. This approach screens for high performance hydrolysate lots, therefore ensuring process consistency and product quality in the mAb manufacturing process. Furthermore, PLS analysis was successful in discerning multiple markers (DL-lactate, soy saccharides, citrate and succinate) among hydrolysate components that positively and negatively correlate with titer. Interestingly, these markers correlate to the metabolic characteristics of some strains of taxonomically diverse lactic acid bacteria (LAB). Thus our findings indicate that LAB strains may exist during hydrolysate manufacturing steps and their biochemical activities may attribute to the titer enhancement effect of soy hydrolysates. Copyright © 2012 American Institute of Chemical Engineers (AIChE).

  14. Cluster lot quality assurance sampling: effect of increasing the number of clusters on classification precision and operational feasibility.

    Science.gov (United States)

    Okayasu, Hiromasa; Brown, Alexandra E; Nzioki, Michael M; Gasasira, Alex N; Takane, Marina; Mkanda, Pascal; Wassilak, Steven G F; Sutter, Roland W

    2014-11-01

    To assess the quality of supplementary immunization activities (SIAs), the Global Polio Eradication Initiative (GPEI) has used cluster lot quality assurance sampling (C-LQAS) methods since 2009. However, since the inception of C-LQAS, questions have been raised about the optimal balance between operational feasibility and precision of classification of lots to identify areas with low SIA quality that require corrective programmatic action. To determine if an increased precision in classification would result in differential programmatic decision making, we conducted a pilot evaluation in 4 local government areas (LGAs) in Nigeria with an expanded LQAS sample size of 16 clusters (instead of the standard 6 clusters) of 10 subjects each. The results showed greater heterogeneity between clusters than the assumed standard deviation of 10%, ranging from 12% to 23%. Comparing the distribution of 4-outcome classifications obtained from all possible combinations of 6-cluster subsamples to the observed classification of the 16-cluster sample, we obtained an exact match in classification in 56% to 85% of instances. We concluded that the 6-cluster C-LQAS provides acceptable classification precision for programmatic action. Considering the greater resources required to implement an expanded C-LQAS, the improvement in precision was deemed insufficient to warrant the effort. Published by Oxford University Press on behalf of the Infectious Diseases Society of America 2014. This work is written by (a) US Government employee(s) and is in the public domain in the US.

  15. 30 CFR 285.905 - When must I submit my decommissioning application?

    Science.gov (United States)

    2010-07-01

    ... application? 285.905 Section 285.905 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE RENEWABLE ENERGY ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Decommissioning Decommissioning Applications § 285.905 When must I submit my decommissioning application? You must...

  16. Development of an electronic claim system based on an integrated electronic health record platform to guarantee interoperability.

    Science.gov (United States)

    Kim, Hwa Sun; Cho, Hune; Lee, In Keun

    2011-06-01

    We design and develop an electronic claim system based on an integrated electronic health record (EHR) platform. This system is designed to be used for ambulatory care by office-based physicians in the United States. This is achieved by integrating various medical standard technologies for interoperability between heterogeneous information systems. The developed system serves as a simple clinical data repository, it automatically fills out the Centers for Medicare and Medicaid Services (CMS)-1500 form based on information regarding the patients and physicians' clinical activities. It supports electronic insurance claims by creating reimbursement charges. It also contains an HL7 interface engine to exchange clinical messages between heterogeneous devices. The system partially prevents physician malpractice by suggesting proper treatments according to patient diagnoses and supports physicians by easily preparing documents for reimbursement and submitting claim documents to insurance organizations electronically, without additional effort by the user. To show the usability of the developed system, we performed an experiment that compares the time spent filling out the CMS-1500 form directly and time required create electronic claim data using the developed system. From the experimental results, we conclude that the system could save considerable time for physicians in making claim documents. The developed system might be particularly useful for those who need a reimbursement-specialized EHR system, even though the proposed system does not completely satisfy all criteria requested by the CMS and Office of the National Coordinator for Health Information Technology (ONC). This is because the criteria are not sufficient but necessary condition for the implementation of EHR systems. The system will be upgraded continuously to implement the criteria and to offer more stable and transparent transmission of electronic claim data.

  17. 18 CFR 35.5 - Rejection of material submitted for filing.

    Science.gov (United States)

    2010-04-01

    ... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Rejection of material submitted for filing. 35.5 Section 35.5 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... that fails to comply with this Part may be rejected by the Director of the Office of Energy Market...

  18. Citation analysis of doctoral theses submitted to the department of ...

    African Journals Online (AJOL)

    This is a bibliometric study carried out on eighty doctoral theses submitted to the Department of Library, Archival and Information Studies at the University of Ibadan, with the aim of determining the characteristics of citations in the theses. Most of the citations were to journals and books. Majority of the sources cited were old.

  19. Trends in the number and the quality of trial protocols involving children submitted to a French Institutional Review Board

    Directory of Open Access Journals (Sweden)

    Isabelle Gautier

    2017-08-01

    Full Text Available Abstract Background There is a great need for high quality clinical research for children. The European Pediatric Regulation aimed to improve the quality of clinical trials in order to increase the availability of treatments for children. The main purpose of this study was to assess the evolution of both the number and the quality of pediatric trial protocols that were submitted to a French Institutional Review Board (IRB00009118 before and after the initiation of the EU Pediatric Regulation. Methods All protocols submitted to the IRB00009118 between 2003 and 2014 and conducting research on subjects under eighteen years of age were eligible. The quality of randomized clinical trials was assessed according to the guidelines developed by the Enhancing the QUAlity and Transparency Of health Research (EQUATOR Network and ranked using the Jadad score. Results Out of 622 protocols submitted to the Institutional Review Board (IRB, 21% (133/622 included children. Among these 133 pediatric protocols, the number of submitted pediatric protocols doubled between the two studied periods. From 2003 to 2008, 47 protocols including 21 institutionally sponsored were submitted to the IRB and from 2009 until 2014, 86 protocols including 48 institutionally sponsored were submitted. No significant trend was observed on the quality of RCTs. The overall median score of RCTs on the Jadad scale was high (3.5, 70.0% of protocols had a Jadad score ≥ 3, and 30.0% had a score < 3. Conclusion Following the EU Pediatric Regulation, the number of pediatric protocols submitted to the IRB00009118 tends to increase, but no change was noticed regarding their quality.

  20. Production aspects of broiler breeders submitted to different drinker types

    Directory of Open Access Journals (Sweden)

    LP Colvero

    2014-03-01

    Full Text Available The objective of this study was of evaluate the influence of different drinker types on the egg production, water intake, mortality, poultry litter relative humidity, egg weight, eggshell percentage, and egg specific gravity of broiler breeders. The experiment was carried out in a commercial farm with 37- to 44-wk-old broiler breeders. A randomized block experimental design, consisting of two treatments (bell or nipple drinkers with four replicates of 4.000 females each, was applied. Data were submitted to analysis of variance, and means were compared by the test of Student-Newman-Keuls at 5% significance level. Birds submitted to nipple drinkers presented lower water intake (p0.05 of drinker type on egg production or mortality. Poultry litter relative humidity was lower (p<0.05 under the nipple-drinker system. Birds drinking from bell drinkers produced heavier eggs (p<0.05 between weeks 39 and 40. Hens drinking from bell drinkers laid eggs with higher specific gravity and eggshell percentage. It was concluded that nipple drinkers can be used for broiler breeders during lay.

  1. 78 FR 40169 - Notice of Realty Action: Classification for Lease and Subsequent Conveyance for Recreation and...

    Science.gov (United States)

    2013-07-03

    ... Manager, Las Vegas Field Office, 4701 N. Torrey Pines Drive, Las Vegas, Nevada 89130. FOR FURTHER... include classrooms, gymnasium, football field, baseball field, tennis courts, parking lot, and related... to do so. Only written comments submitted to the Field Manager, BLM Las Vegas Field Office, will be...

  2. 30 CFR 285.611 - What information must I submit with my SAP to assist MMS in complying with NEPA and other...

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What information must I submit with my SAP to... Assessment Plan § 285.611 What information must I submit with my SAP to assist MMS in complying with NEPA and other relevant laws? (a) You must submit with your SAP detailed information to assist MMS in complying...

  3. Growth, meat and feed efficiency traits of lambs born to ewes submitted to energy restriction during mid-gestation.

    Science.gov (United States)

    Piaggio, L; Quintans, G; San Julián, R; Ferreira, G; Ithurralde, J; Fierro, S; Pereira, A S C; Baldi, F; Banchero, G E

    2018-02-01

    The objective of this study was to evaluate the effects of the energy restriction of gestation of adult ewes from day 45 to day 115 on lamb live performance parameters, carcass and meat traits. In experiment I, dietary energy was restricted at 70% of the metabolizable energy (ME) requirements, after which ewes were re-fed ad libitum until lambing. In experiment II, dietary energy was restricted at 60% of the ME requirements, and ewes were re-fed to ME requirements until lambing. All ewes grazed together from the end of the restriction periods to weaning. Lambs were weaned and lot fed until slaughter. Feed intake, weight gain and feed efficiency were recorded, and body fat thickness and ribeye area (REA) were measured in the longissimus thoracis muscle. After slaughter, carcass weight and yield, fat depth, carcass and leg length, and frenched rack and leg weights and yields were determined. Muscle fiber type composition, Warner-Bratzler shear force, pH and color were determined in the longissimus lumborum muscle. In experiment I, energy restriction followed by ad libitum feeding affected lamb birth weight (P0.05) were observed on later BW, REA, BF or carcass traits. Lambs born to non-restricted-fed ewes had higher (Penergy restriction followed by ME requirements feeding, affected (Pefficient (P=0.16) than lambs from unrestricted dams. Ribeye area and BF were not influenced by treatment. Treatment significantly affected slaughter weight, but had no effects on carcass yield and traits or on meat traits. The results obtained in both experiments indicate submitting ewes to energy restriction during gestation affects the performance of their progeny but the final outcome would depend on the ewe's re-feeding level during late gestation and the capacity of the offspring to compensate the in utero restriction after birth.

  4. Evaluation of the motility function of the gall - bladder in subject submitted to a vagotomy

    International Nuclear Information System (INIS)

    Szegoe, T.

    1989-01-01

    The emptying of the gallbladder was studied in 13 patients submited to truncal vagotomy, 14 to selective vagotomy, associated to hemi-gastrectomy and reconstruction of the digestive tract through gastroduodenostomy; 15 pacients submited to proximal gastrix vagotomy and 15 controls. The evaluation was done by the injection of 185 MBq (5 mCi) of DISIDA - 99m Tc and images were obtained in gamma-camera at 70, 100, 115 and 130 minutes after the venous injection of the radioisotope. (L.M.J.) [pt

  5. NATO Advanced Study Institute on Relativistic and Electron Correlation Effects in Molecules and Solids

    CERN Document Server

    1994-01-01

    The NATO Advanced Study Institute (ASI) on "R@lativistic and Electron Correlation Effects in Molecules and Solids", co-sponsored by Simon Fraser University (SFU) and the Natural Sciences and Engineering Research Council of Canada (NSERC) was held Aug 10- 21, 1992 at the University of British Columbia (UBC), Vancouver, Canada. A total of 90 lecturers and students with backgrounds in Chemistry, Physics, Mathematics and various interdisciplinary subjects attended the ASI. In my proposal submitted to NATO for financial support for this ASI, I pointed out that a NATO ASI on the effects of relativity in many-electron systems was held ten years ago, [See G.L. Malli, (ed) Relativistic Effects in Atoms, Molecules and Solids, Plenum Press, Vol B87, New York, 1983]. Moreover, at a NATO Advanced Research Workshop (ARW) on advanced methods for molecular electronic structure "an assessment of state-of­ the-art of Electron Correlation ... " was carried out [see C.E. Dykstra, (ed), Advanced Theories and Computational Approa...

  6. Performance of the Lot Quality Assurance Sampling Method Compared to Surveillance for Identifying Inadequately-performing Areas in Matlab, Bangladesh

    OpenAIRE

    Bhuiya, Abbas; Hanifi, S.M.A.; Roy, Nikhil; Streatfield, P. Kim

    2007-01-01

    This paper compared the performance of the lot quality assurance sampling (LQAS) method in identifying inadequately-performing health work-areas with that of using health and demographic surveillance system (HDSS) data and examined the feasibility of applying the method by field-level programme supervisors. The study was carried out in Matlab, the field site of ICDDR,B, where a HDSS has been in place for over 30 years. The LQAS method was applied in 57 work-areas of community health workers i...

  7. Directory of AFRL/HEA Technical Publications Submitted to DTIC from 1969 to 2007

    National Research Council Canada - National Science Library

    Bell, Herbert H; Casey, Elizabeth P

    2007-01-01

    ...) has submitted technical publications to the Defense Technical Information Center (DTIC) documenting the unique research and development efforts conducted by this organization to improve warfighter training...

  8. Discussion of submitted posters for Section 2.3 (Rangeland Germplasm Resources)

    Science.gov (United States)

    As part of the IX International Rangeland Congress held in Rosario, Argentina, a total of 70 posters from 17 countries were submitted to Section 2.3 (Rangeland Germplasm Resources). These posters documented research conducted in five major regions of the world: South America, North America, Africa...

  9. 15 CFR 711.2 - Who submits declarations, reports, and advance notifications.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Who submits declarations, reports, and advance notifications. 711.2 Section 711.2 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS...

  10. 40 CFR 63.6009 - What notifications must I submit and when?

    Science.gov (United States)

    2010-07-01

    ... National Emissions Standards for Hazardous Air Pollutants: Rubber Tire Manufacturing Notifications, Reports... this subpart. (d) If you are required to conduct a performance test, you must submit a notification of intent to conduct a performance test at least 60 calendar days before the performance test is scheduled...

  11. 25 CFR 516.2 - When may a person to whom this part applies give testimony, make a statement or submit to interview?

    Science.gov (United States)

    2010-04-01

    ... testimony, make a statement or submit to interview? 516.2 Section 516.2 Indians NATIONAL INDIAN GAMING... whom this part applies give testimony, make a statement or submit to interview? (a) No person to whom... regulation, shall provide testimony, make a statement or submit to interview. (b) Whenever a subpoena...

  12. Multiscale Alterations in Sugar Cane Bagasse and Straw Submitted to Alkaline Deacetylation

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Cleilton S. [Brazilian Bioethanol Science and Technology Laboratory (CTBE), Brazilian Center for Research in Energy and Materials (CNPEM), 13083-970 Campinas, São Paulo, Brazil; Department of Biotechnology, Engineering College of Lorena, University of São Paulo, 12602-810 Lorena, São Paulo, Brazil; Rabelo, Sarita C. [Brazilian Bioethanol Science and Technology Laboratory (CTBE), Brazilian Center for Research in Energy and Materials (CNPEM), 13083-970 Campinas, São Paulo, Brazil; Ciesielski, Peter N. [Biosciences Center, National Renewable Energy Laboratory, 15013 Denver West Parkway, Golden, Colorado 80401, United States; Roberto, Inês C. [Department of Biotechnology, Engineering College of Lorena, University of São Paulo, 12602-810 Lorena, São Paulo, Brazil; Rocha, George J. M. [Department of Biotechnology, Engineering College of Lorena, University of São Paulo, 12602-810 Lorena, São Paulo, Brazil; Driemeier, Carlos [Brazilian Bioethanol Science and Technology Laboratory (CTBE), Brazilian Center for Research in Energy and Materials (CNPEM), 13083-970 Campinas, São Paulo, Brazil

    2018-01-31

    Alkaline deacetylation has emerged as a promising chemistry for pretreatments performed prior to enzymatic saccharification of lignocellulosic biomass. This process avoids complex pressurized reactors and opens new opportunities for lignin covalorization. In this work, we evaluate the chemical and morphological response of sugar cane bagasse and straw submitted to alkaline treatments. Alkaline solutions for deacetylation (0.4% w/w NaOH, 70 degrees C, 3 h) as well as proximal conditions (0.1-0.7% NaOH, 55-85 degrees C, 1-5 h) chosen by 23 experimental design were evaluated. The deacetylation treatment removes ~90% of the acetyl groups and 20-30% of the lignin from both bagasse and straw, while removal of ~20% of the xylan and glucan is observed in straw, but not in bagasse. Considering nanoscale structural alterations, neither cellulose cocrystallization (evaluated by X-ray diffraction) nor formation of lignin aggregates (evaluated by thermoporometric signature) are observed after the alkaline conditions, in contrast to observations after hydrothermal treatments. Furthermore, calorimetric thermoporometry as well as scanning and transmission electron microscopies show substantial introduction of nanoscale porosity and loosening of the tissue and cell wall structures, indicating desirable mechanical weakening and gains in enzyme accessibility. These results provide fundamental and practical knowledge for biorefineries based on alkaline deacetylation of sugar cane bagasse and straw.

  13. 78 FR 53476 - Notice of Realty Action: Classification for Lease and Subsequent Conveyance for Recreation and...

    Science.gov (United States)

    2013-08-29

    ..., until October 15, 2013. ADDRESSES: Send written comments to the BLM Field Manager, Carlsbad Field Office... include classrooms, gymnasiums, parking lots, etc. The middle school will also include a football field... to do so. Only written comments submitted to the Field Manager, BLM Carlsbad Field Office, will be...

  14. A pulse radiolysis study of the electron reaction with DNA in aqueous solution and ice

    International Nuclear Information System (INIS)

    Verberne, J.B.

    1981-01-01

    Research is described into some aspects of the interaction of ionizing radiation with DNA, the main emphasis being on the indirect effect where the radiation causes the formation of intermediates in the surrounding medium which then interact with the DNA. Experiments are described which have been carried out to examine the dependence of the reaction rate constant on ionic strength and counterion charge. They show that for double stranded DNA (dsDNA) the reaction rate constant increases with ionic strength. To see whether quantitative agreement can be obtained between the observations and a physical interpretation the author combines a model for reaction kinetics and a refined model for the electrostatic potential into one to obtain a theoretical rate constant for reaction with a cylindrical polyelectrolyte. Optical absorption spectra of the electron adducts of ss- and dsDNA are shown to exist and they differ significantly from the spectra of the H and OH adducts. The spectra of the electron adducts of the nucleotides have been measured. Experiments are also described devoted to the precursor of the hydrated electron: the thermalized, dry electron. Although from a radiation chemical point of view the experiments yielded a lot of information (a direct observation of the dry electron, the kinetics of electron localization, the role of ice defects in the solvation process, etc.), they proved also that the dry electron does not react with DNA in an ice matrix. (Auth.)

  15. Analysis of final year DVM research projects submitted to the Faculty ...

    African Journals Online (AJOL)

    This study analyzed the intellectual output of the undergraduate final year students. research projects submitted to the Faculty of Veterinary Medicine, Usmanu Danfodiyo University, Sokoto, from 1994 to 2004. The findings of the study show that a total of 194 research projects were produced within the period under study.

  16. 30 CFR 210.105 - May I submit these production reports manually?

    Science.gov (United States)

    2010-07-01

    ... addressed to Minerals Management Service, P.O. Box 17110, Denver, Colorado 80217-0110; or (2) Special... 30 Mineral Resources 2 2010-07-01 2010-07-01 false May I submit these production reports manually? 210.105 Section 210.105 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR...

  17. 20 CFR 645.415 - What planning information must a State submit in order to receive a formula grant?

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What planning information must a State submit in order to receive a formula grant? 645.415 Section 645.415 Employees' Benefits EMPLOYMENT AND... Grants Administration § 645.415 What planning information must a State submit in order to receive a...

  18. Use of X - Rays for the evaluation of internal damages provoked by corn seed drying and the effect of those damages upon the seeds quality

    International Nuclear Information System (INIS)

    Obando Flor, Ebert Pepe; Moreira de Carvalho, Maria Laene

    2002-01-01

    The work was conducted in the seed analysis laboratory of the department of agriculture and forest sciences of the Universidade Federal de Lavras (Federal University of Lavras. MG), over the period 1999 - 2000. Aiming to evaluate the efficiency of utilization of X - rays in the identification of the several types of internal damages provoked by corn seed drying to high temperatures as well as the effect of those damages upon the physiological quality of stored seeds, lots of the cultivars AG1143 and BR 106 were submitted to drying at the temperature of 50 degrades Celsius. The lots were divided into two categories according to the presence or not of internal damages visible with the naked eye submitted to the X - ray test (for 45 at 25 Kvp of radiation intensity) afterwards. They were separated into three sub lots. CDVCDRX (with visual damages and detected by X - ray) SDVSDRX (without visual damages and with damages detected by X ray). The sub lots were evaluated in their physiological quality by viability and vigor tests. The results showed the efficiency of X ray in detecting internal damages of drying not observed by visual analysis. The vigor of corn seeds with internal drying damages is affected in several manners, depending on the cultivars, evaluation time and sort of damage internal damages of drying detected by the radiographical analysis in spite of not affecting early viability, when they occurs in the two directions horizontal and vertical (Double damage) decrease the vigor of seeds after storage

  19. Joint Economic Lot Sizing Optimization in a Supplier-Buyer Inventory System When the Supplier Offers Decremental Temporary Discounts

    Directory of Open Access Journals (Sweden)

    Diana Puspita Sari

    2012-02-01

    Full Text Available This research discusses mathematical models of joint economic lot size optimization in a supplier-buyer inventory system in a situation when the supplier offers decremental temporary discounts during a sale period. Here, the sale period consists of n phases and the phases of discounts offered descend as much as the number of phases. The highest discount will be given when orders are placed in the first phase while the lowest one will be given when they are placed in the last phase. In this situation, the supplier attempts to attract the buyer to place orders as early as possible during the sale period. The buyers will respon these offers by ordering a special quantity in one of the phase. In this paper, we propose such a forward buying model with discount-proportionally-distributed time phases. To examine the behaviour of the proposed model, we conducted numerical experiments. We assumed that there are three phases of discounts during the sale period. We then compared the total joint costs of special order placed in each phase for two scenarios. The first scenario is the case of independent situation – there is no coordination between the buyer and the supplie-, while the second scenario is the opposite one, the coordinated model. Our results showed the coordinated model outperform the independent model in terms of producing total joint costs. We finally conducted a sensitivity analyzis to examine the other behaviour of the proposed model. Keywords: supplier-buyer inventory system, forward buying model, decremental temporary discounts, joint economic lot sizing, optimization.

  20. ESR studies of electron irradiated K3Ir(CN)6 in KCl single crystals

    International Nuclear Information System (INIS)

    Vugman, N.V.; Pinhal, N.M.

    1983-01-01

    ESR studies of KCl single crystals doped with small amounts of K 3 Ir(CN) 6 and submitted to a prolongued 2 MeV electron irradiation at room temperature reveal the presence of the [IR(CN) 5 Cl] 4- and [Ir(CN) 4 Cl 2 ] 4- new molecular species. Ligand spin densities and ligand field parameters are calculated from the experimental hyperfine and superhyperfine interactions and compared to previous data on the [Ir(CN) 5 ] 4- species. (Author) [pt

  1. 20 CFR 667.120 - What planning information must a State submit in order to receive a formula grant?

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What planning information must a State submit in order to receive a formula grant? 667.120 Section 667.120 Employees' Benefits EMPLOYMENT AND... INVESTMENT ACT Funding § 667.120 What planning information must a State submit in order to receive a formula...

  2. Unmanned Aerial Vehicle-Based Automobile License Plate Recognition System for Institutional Parking Lots

    Directory of Open Access Journals (Sweden)

    Julian Dasilva

    2017-10-01

    Full Text Available Unmanned aerial vehicles (UAVs, also known as drones have many applications and they are a current trend across many industries. They can be used for delivery, sports, surveillance, professional photography, cinematography, military combat, natural disaster assistance, security, and the list grows every day. Programming opens an avenue to automate many processes of daily life and with the drone as aerial programmable eyes, security and surveillance can become more efficient and cost effective. At Barry University, parking is becoming an issue as the number of people visiting the school greatly outnumbers the convenient parking locations. This has caused a multitude of hazards in parking lots due to people illegally parking, as well as unregistered vehicles parking in reserved areas. In this paper, we explain how automated drone surveillance is utilized to detect unauthorized parking at Barry University. The automated process is incorporated into Java application and completed in three steps: collecting visual data, processing data automatically, and sending automated responses and queues to the operator of the system.

  3. Stochastic Lot-Sizing under Carbon Emission Control for Profit Optimisation in MTO Manufacturing

    Directory of Open Access Journals (Sweden)

    Qiao A.

    2017-01-01

    Full Text Available Aggravating global warming has heightened the imminent need by the world to step up forceful efforts on curbing emission of greenhouse gases. Although manufacturing is a major resource of carbon emission, few research works have studied the impacts of carbon constraints on manufacturing, leading to environmentally unsustainable production strategies and operations. This paper incorporates carbon emission management into production planning for make-to-order (MTO manufacturing. This paper proposes a model that solves lot-sizing problems to maximise profits under carbon emission caps. The model adopts stochastic interarrival times for customer orders to enhance the practicality of the results for real-world manufacturing. Numerical experiments show that reducing carbon emission undercuts short-term profits of a company. However, it is conducive to the company’s market image as being socially responsible which would attract more customers who concern about environmental protection. Hence, reducing carbon emission in manufacturing is beneficial to long-term profitability and sustainability. The results provide managerial insights into manufacture operations for balancing profitability and carbon control.

  4. 5th environmental report submitted by the Hessian Government

    International Nuclear Information System (INIS)

    1992-01-01

    The 5th environmental report submitted by the Hessian Government informs about the success of environmental policies in the period under review and discuss the future tasks and targets with emphasis on I) environmental quality in Hesse (A. Nature and ladscape, B. water, C. air, D. noise, E. chemicals, industrial monitoring, F. wastes, G. pollutants in the food chain, H. radioactivity and radiation protection), II) selected instruments and points of main effort, III) work and environment; Appendix. (BBR) [de

  5. 34 CFR 656.10 - What combined application may an institution submit?

    Science.gov (United States)

    2010-07-01

    ... LANGUAGE AND AREA STUDIES OR FOREIGN LANGUAGE AND INTERNATIONAL STUDIES How Does One Apply for a Grant... 34 Education 3 2010-07-01 2010-07-01 false What combined application may an institution submit? 656.10 Section 656.10 Education Regulations of the Offices of the Department of Education (Continued...

  6. 40 CFR 63.9350 - What reports must I submit and when?

    Science.gov (United States)

    2010-07-01

    ... new or reconstructed affected source that must meet the emission limitation, you must submit a... there is no deviation from the applicable emission limitation and the CEMS or CPMS was not out-of... reconstructed engine test cell/stand during the reporting period. (3) A summary of the total duration of the...

  7. 30 CFR 210.55 - May I submit this royalty report manually?

    Science.gov (United States)

    2010-07-01

    ... to Minerals Management Service, P.O. Box 5810, Denver, Colorado 80217-5810; or (2) Special courier or... 30 Mineral Resources 2 2010-07-01 2010-07-01 false May I submit this royalty report manually? 210.55 Section 210.55 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR MINERALS...

  8. Measurements of the Cosmic Radiation Doses at Board of Aircraft of Polish Airlines LOT. Part 1

    International Nuclear Information System (INIS)

    Bilski, P.; Budzanowski, M.; Horwacik, T.; Marczewska, B.; Olko, P.

    2000-12-01

    Radiation doses received by a group of 30 pilots of the Polish Airlines LOT were investigated between July and October 2000. The measurement of the low-LET component of the cosmic radiation, lasting in average 2 months, was performed with 7 LiF:Mg,Ti and 7 L iF:Mg,Cu,P thermoluminescent detectors. The neutron component was measured with the thermoluminescent albedo cassettes. Additionally for all flights, records of altitude profiles were kept and effective doses were then calculated with the CARI-6 computer code. In total, about 560 flights were included in the calculations. The highest obtained dose was about 0.8 mSv in 2 months. Results of calculations are mostly consistent with the results of measurements. (author)

  9. Proceedings of the FNCA workshop on application of electron accelerator

    International Nuclear Information System (INIS)

    Yoshii, Fumio; Kume, Tamikazu

    2003-02-01

    'Forum for Nuclear Cooperation in Asia (FNCA) Workshop on Application of Electron Accelerator' was sponsored by the Ministry of Education, Culture, Sports, Science and Technology (MEXT) and hosted by Japan Atomic Energy Research Institute (JAERI) and Japan Atomic Industry Forum (JAIF). It was held at the Takasaki Radiation Chemistry Research Establishment (TRCRE), JAERI, Takasaki, Japan from 28 January to 1 February, 2002. The Workshop was attended by experts on application of electron accelerator from each of the participating countries, i.e. China, Indonesia, Korea, Malaysia, The Philippines, Thailand and Vietnam and 16 participants from Japan. A total of 17 papers including invited papers on the current status of application of electron accelerator in the participating countries were presented. The characteristics of various kinds of electron accelerators were introduced. Current research and development on the utilization radiation processing for natural rubber latex, natural polymer solution, polymer films, sterilization of spices and seeds, radiation treatment of flue gases and dioxin in liquid, solid, and gases were reported. Based on the proposed needs from the participating countries, the work plan was discussed and agreed on application of electron accelerator for liquid and for solid (thin films and granules/powder). All manuscripts submitted by every speaker were included in the proceedings. The 16 of the presented papers are indexed individually. (J.P.N.)

  10. Proceedings of the FNCA workshop on application of electron accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Yoshii, Fumio; Kume, Tamikazu (eds.) [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

    2003-02-01

    'Forum for Nuclear Cooperation in Asia (FNCA) Workshop on Application of Electron Accelerator' was sponsored by the Ministry of Education, Culture, Sports, Science and Technology (MEXT) and hosted by Japan Atomic Energy Research Institute (JAERI) and Japan Atomic Industry Forum (JAIF). It was held at the Takasaki Radiation Chemistry Research Establishment (TRCRE), JAERI, Takasaki, Japan from 28 January to 1 February, 2002. The Workshop was attended by experts on application of electron accelerator from each of the participating countries, i.e. China, Indonesia, Korea, Malaysia, The Philippines, Thailand and Vietnam and 16 participants from Japan. A total of 17 papers including invited papers on the current status of application of electron accelerator in the participating countries were presented. The characteristics of various kinds of electron accelerators were introduced. Current research and development on the utilization radiation processing for natural rubber latex, natural polymer solution, polymer films, sterilization of spices and seeds, radiation treatment of flue gases and dioxin in liquid, solid, and gases were reported. Based on the proposed needs from the participating countries, the work plan was discussed and agreed on application of electron accelerator for liquid and for solid (thin films and granules/powder). All manuscripts submitted by every speaker were included in the proceedings. The 16 of the presented papers are indexed individually. (J.P.N.)

  11. A Study on Technology Architecture and Serving Approaches of Electronic Government System

    Science.gov (United States)

    Liu, Chunnian; Huang, Yiyun; Pan, Qin

    As E-government becomes a very active research area, a lot of solutions to solve citizens' needs are being deployed. This paper provides technology architecture of E-government system and approaches of service in Public Administrations. The proposed electronic system addresses the basic E-government requirements of user friendliness, security, interoperability, transparency and effectiveness in the communication between small and medium sized public organizations and their citizens, businesses and other public organizations. The paper has provided several serving approaches of E-government, which includes SOA, web service, mobile E-government, public library and every has its own characteristics and application scenes. Still, there are a number of E-government issues for further research on organization structure change, including research methodology, data collection analysis, etc.

  12. Summary of Country Reports Submitted to the Energy Efficiency Working Party: October 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The purpose of this summary report is to highlight energy efficiency policy action and planning in IEA member countries submited to the Energy Efficiency Working Party (EEWP) from March to September 2011.

  13. Privacy Act System of Records: Invention Reports Submitted to the EPA, EPA-38

    Science.gov (United States)

    Learn about the Invention Reports Submitted to the EPA System, including who is covered in the system, the purpose of data collection, routine uses for the system's records, and other security procedures.

  14. Rectal dose assessment in patients submitted to high-dose-rate brachytherapy for uterine cervix cancer

    International Nuclear Information System (INIS)

    Oliveira, Jetro Pereira de; Batista, Delano Valdivino Santos; Bardella, Lucia Helena; Carvalho, Arnaldo Rangel

    2009-01-01

    Objective: The present study was aimed at developing a thermoluminescent dosimetric system capable of assessing the doses delivered to the rectum of patients submitted to high-dose-rate brachytherapy for uterine cervix cancer. Materials and methods: LiF:Mg,Ti,Na powder was the thermoluminescent material utilized for evaluating the rectal dose. The powder was divided into small portions (34 mg) which were accommodated in a capillary tube. This tube was placed into a rectal probe that was introduced into the patient's rectum. Results: The doses delivered to the rectum of six patients submitted to high-dose-rate brachytherapy for uterine cervix cancer evaluated by means of thermoluminescent dosimeters presented a good agreement with the planned values based on two orthogonal (anteroposterior and lateral) radiographic images of the patients. Conclusion: The thermoluminescent dosimetric system developed in the present study is simple and easy to be utilized as compared to other rectal dosimetry methods. The system has shown to be effective in the evaluation of rectal doses in patients submitted to high-dose-rate brachytherapy for uterine cervix cancer. (author)

  15. A Document Imaging Technique for Implementing Electronic Loan Approval Process

    Directory of Open Access Journals (Sweden)

    J. Manikandan

    2015-04-01

    Full Text Available The image processing is one of the leading technologies of computer applications. Image processing is a type of signal processing, the input for image processor is an image or video frame and the output will be an image or subset of image [1]. Computer graphics and computer vision process uses an image processing techniques. Image processing systems are used in various environments like medical fields, computer-aided design (CAD, research fields, crime investigation fields and military fields. In this paper, we proposed a document image processing technique, for establishing electronic loan approval process (E-LAP [2]. Loan approval process has been tedious process, the E-LAP system attempts to reduce the complexity of loan approval process. Customers have to login to fill the loan application form online with all details and submit the form. The loan department then processes the submitted form and then sends an acknowledgement mail via the E-LAP to the requested customer with the details about list of documents required for the loan approval process [3]. The approaching customer can upload the scanned copies of all required documents. All this interaction between customer and bank take place using an E-LAP system.

  16. Whole acute toxicity removal from industrial and domestic effluents treated by electron beam radiation: emphasis on anionic surfactants

    International Nuclear Information System (INIS)

    Moraes, M.C.F.; Romanelli, M.F; Sena, H.C.; Pasqualini da Silva, G.; Sampa, M.H.O.; Borrely, S.I.

    2004-01-01

    Electron beam radiation has been applied to improve real industrial and domestic effluents received by Suzano wastewater treatment plant. Radiation efficacy has been evaluated as toxicity reduction, using two biological assays. Three sites were sampled and submitted for toxicity assays, anionic surfactant determination and electron beam irradiation. This paper shows the reduction of acute toxicity for both test-organisms, the marine bacteria Vibrio fischeri and the crustacean Daphnia similis. The raw toxic effluents exibitted from 0.6 ppm up to 11.67 ppm for anionic surfactant before being treated by the electron beam. Radiation processing resulted in reduction of the acute toxicity as well as surfactant removal. The final biological effluent was in general less toxic than other sites but the presence of anionic surfactants was evidenced

  17. Whole acute toxicity removal from industrial and domestic effluents treated by electron beam radiation: emphasis on anionic surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Moraes, M.C.F. E-mail: mariacristinafm@uol.com.br; Romanelli, M.F; Sena, H.C.; Pasqualini da Silva, G.; Sampa, M.H.O.; Borrely, S.I

    2004-10-01

    Electron beam radiation has been applied to improve real industrial and domestic effluents received by Suzano wastewater treatment plant. Radiation efficacy has been evaluated as toxicity reduction, using two biological assays. Three sites were sampled and submitted for toxicity assays, anionic surfactant determination and electron beam irradiation. This paper shows the reduction of acute toxicity for both test-organisms, the marine bacteria Vibrio fischeri and the crustacean Daphnia similis. The raw toxic effluents exibitted from 0.6 ppm up to 11.67 ppm for anionic surfactant before being treated by the electron beam. Radiation processing resulted in reduction of the acute toxicity as well as surfactant removal. The final biological effluent was in general less toxic than other sites but the presence of anionic surfactants was evidenced.

  18. 77 FR 42314 - Proposed Data Collections Submitted for Public Comment and Recommendations

    Science.gov (United States)

    2012-07-18

    ... characteristics of the work environment, such as the norms, rules, and common understandings that influence employees' perceptions of the importance that the organization places on safety. NIOSH requests OMB approval...] Proposed Data Collections Submitted for Public Comment and Recommendations In compliance with the...

  19. 75 FR 33614 - Adequacy Status of the Submitted 2009 PM2.5

    Science.gov (United States)

    2010-06-14

    ... that transportation activities will not produce new air quality violations, worsen existing violations... the Submitted 2009 PM 2.5 Motor Vehicle Emission Budgets for Transportation Conformity Purposes for..., PM 2.5 nonattainment areas to be adequate for transportation conformity purposes. The transportation...

  20. Choosing a design to fit the situation: how to improve specificity and positive predictive values using Bayesian lot quality assurance sampling

    OpenAIRE

    Olives, Casey; Pagano, Marcello

    2013-01-01

    Background Lot Quality Assurance Sampling (LQAS) is a provably useful tool for monitoring health programmes. Although LQAS ensures acceptable Producer and Consumer risks, the literature alleges that the method suffers from poor specificity and positive predictive values (PPVs). We suggest that poor LQAS performance is due, in part, to variation in the true underlying distribution. However, until now the role of the underlying distribution in expected performance has not been adequately examined.

  1. 75 FR 1790 - Proposed Data Collections Submitted for Public Comment and Recommendations

    Science.gov (United States)

    2010-01-13

    ... projected needs for training. NCHS also asks individual candidates for training to submit an application... respondents, including through the use of automated collection techniques or other forms of information... Statistics Training Application, (OMB No. 0920-0217 exp. 7/ 31/2010)--Extension--National Center for Health...

  2. First paper from Tevatron Run II submitted by CDF collaboration

    CERN Multimedia

    2003-01-01

    "Scientists of the Collider Detector at Fermilab submitted today (March 19) the first scientific publication of Collider Run II to the science journal Physical Review D. The paper titled "Measurement of the Mass Difference m(Ds+)-m(D+) at CDF II" summarizes the results of an analysis carried out by CDF scientists Christoph Paus and Ivan Furic, MIT, describing the mass measurement of particles containing charm quarks" (1 page).

  3. Creative Uses of Custom Electronics for Environmental Monitoring

    Science.gov (United States)

    Hicks, S.; Aufdenkampe, A. K.; Montgomery, D. S.

    2012-12-01

    The ability to build custom electronic devices specifically suited to a unique task has gotten easier and cheaper, thanks to the recent popularity of open source electronics platforms like Arduino. Using Arduino-based processor boards, we have been creating a variety of helpful devices to perform functions that would have been too expensive to implement with standard methods and commercial hardware. The Christina River Basin CZO is currently operating dozens of homemade dataloggers that are connected to different types of environmental sensors. Most of these Arduino loggers have been deployed for over a year, so our experiences with them and their sensors have taught us a lot about the reliability and accuracy of both the loggers and the sensors. Some loggers also have the capability for wireless radio or ethernet data transmission for reporting live data to web sites for instant graphing or archiving. Other Arduino devices have the ability to be controlled remotely through web sites or telephones, making it easy to remotely trigger sample pumps or valves. The open-source nature of Arduino means collaboration is easy because the circuit schematics and source code for programming the boards can be shared between users. And because Arduino devices are easy to use and program, we developed an interface board that allows educators to easily connect a variety of inexpensive environmental sensors to an Arduino board. Then the students can write and upload simple programs to interact with the sensors, making it a very effective tool for teaching electronics and environmental science at the same time. The flexibility and capability of electronics prototyping platforms like Arduino mean these simple boards can cheaply and effectively perform a countless number of tasks for projects in environmental science and education.

  4. TIME REDUCTION FOR SURINAM GRASS SEED GERMINATION TEST

    Directory of Open Access Journals (Sweden)

    Camila de Aquino Tomaz

    2015-10-01

    Full Text Available ABSTRACTThe period for the germination test of Surinam grass seeds established by the Rules for Seeds Testing is 28 days, considered too lengthy by producers, venders, and seed analysis laboratories. So, the objective of this research was to evaluate the possibility of reducing the time for the germination test of Surinam grass seeds and to establish a method for dormancy breaking and the ideal temperature. Ten seed lots were submitted to the following treatments to overcome seed dormancy: control; substrate moistening with 0.2% KNO3; and scarification with sulfuric acid (98% 36 N for 15 minutes. After the treatments, the lots were submitted to seed water content, germination and tetrazolium tests. During the germination test, conducted with four replicates of 100 seeds per treatment for 28 days, two conditions of alternating temperatures (20-35 °C and 15-35 °C with 8 hours of light were tested. Attempting to determine the test end date, daily counts of the number of normal seedlings were made and for each lot, treatment, and temperature, a growth curve for the evaluation of germination was adjusted. The segmented regression model parameter estimations were calculated for each treatment. The germination test of Braquiaria decumbensseeds may be evaluated in 12 days after sowing using alternating temperatures of 20-35 °C and without any treatment to overcome dormancy.

  5. Testes de vigor utilizados na avaliação da qualidade fisiológica de lotes de sementes de milho-doce (sh2 Vigor tests for selection of sweet corn (sh2 seeds lot

    Directory of Open Access Journals (Sweden)

    Rogério de Andrade Coimbra

    2009-12-01

    Full Text Available Dentro de um programa de controle de qualidade, a avaliação do vigor de sementes é fundamental e necessária para o sucesso da produção. Com o objetivo de avaliar a eficiência de diferentes testes de vigor na avaliação da qualidade fisiológica de sementes de milho-doce na tentativa de diferenciação de lotes quanto ao nível de vigor e previsão de emergência de plântulas em campo e ao potencial de armazenamento, 10 lotes do híbrido DO-04 shrunken-2 (sh-2 foram submetidos a teste de germinação, primeira contagem, precocidade de emissão de raiz primária (32, 48, 56 e 72h, teste de frio, condutividade elétrica (50 sementes 75mL-1 de água; 25°C/4, 6, 8 e 24h, envelhecimento acelerado (42°C em água destilada (100%UR, solução saturada de cloreto de potássio (87%UR e solução saturada de cloreto de sódio (76% UR, avaliando-se quatro períodos de exposição (24, 48, 72 e 96h, teor de água, emergência de plântulas em campo e germinação após armazenamento das sementes (10°C e 40%UR, avaliada quadrimestralmente por 16 meses. A condutividade elétrica (por 6, 8 e 24h foi o único teste eficiente na diferenciação do vigor de lotes de sementes de milho-doce (sh2; no entanto, não apresentou correlação com a emergência de plântulas em campo ou armazenamento.In a program of seed quality assurance, the evaluation of seed vigor is fundamental and necessary to the global production process outcome. The objective of this experiment was to verify the efficiency of different vigor tests for evaluation of sweet corn seeds quality towards lots differentiation and prevision of seedling emergence and storage capacity of those. Ten lots of DO-04 shrunken-2 (sh2 hybrid sweet corn seeds were submitted to the following evaluations: germination, first counting of germination test, earliness of primary root emission (32, 48, 56 and 72 hours, cold test, electrical conductivity test (50 seeds into 75ml of water, at 25°C for 4, 6, 8 and

  6. 41 CFR 301-52.7 - When must I submit my travel claim?

    Science.gov (United States)

    2010-07-01

    ... travel claim? 301-52.7 Section 301-52.7 Public Contracts and Property Management Federal Travel Regulation System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES ARRANGING FOR TRAVEL SERVICES, PAYING TRAVEL EXPENSES, AND CLAIMING REIMBURSEMENT 52-CLAIMING REIMBURSEMENT § 301-52.7 When must I submit my travel...

  7. 76 FR 28192 - Petition for Rulemaking Submitted by the Nuclear Energy Institute

    Science.gov (United States)

    2011-05-16

    ... NUCLEAR REGULATORY COMMISSION 10 CFR Part 26 [Docket No. PRM-26-5; NRC-2010-0304] Petition for Rulemaking Submitted by the Nuclear Energy Institute AGENCY: Nuclear Regulatory Commission. ACTION: Petition... Anthony R. Pietrangelo, on behalf of the Nuclear Energy Institute (NEI), the petitioner, in the planned...

  8. 15 CFR 711.7 - Where to submit declarations, reports and advance notifications.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Where to submit declarations, reports and advance notifications. 711.7 Section 711.7 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL...

  9. 17 CFR 1.54 - Contract market rules submitted to and approved or not disapproved by the Secretary of Agriculture.

    Science.gov (United States)

    2010-04-01

    ... submitted to and approved or not disapproved by the Secretary of Agriculture. 1.54 Section 1.54 Commodity... Secretary of Agriculture. Notwithstanding any provision of these rules, any bylaw, rule, regulation, or resolution of a contract market that was submitted to the Secretary of Agriculture pursuant or § 1.38(a) or...

  10. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys.

    Directory of Open Access Journals (Sweden)

    Lauren Hund

    Full Text Available Lot quality assurance sampling (LQAS surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we compare these latter cluster LQAS methodologies and provide recommendations for choosing a cluster LQAS design. We compare technical differences in the three methods and determine situations in which the choice of method results in a substantively different design. We consider two different aspects of the methods: the distributional assumptions and the clustering parameterization. Further, we provide software tools for implementing each method and clarify misconceptions about these designs in the literature. We illustrate the differences in these methods using vaccination and nutrition cluster LQAS surveys as example designs. The cluster methods are not sensitive to the distributional assumptions but can result in substantially different designs (sample sizes depending on the clustering parameterization. However, none of the clustering parameterizations used in the existing methods appears to be consistent with the observed data, and, consequently, choice between the cluster LQAS methods is not straightforward. Further research should attempt to characterize clustering patterns in specific applications and provide suggestions for best-practice cluster LQAS designs on a setting-specific basis.

  11. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys.

    Science.gov (United States)

    Hund, Lauren; Bedrick, Edward J; Pagano, Marcello

    2015-01-01

    Lot quality assurance sampling (LQAS) surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we compare these latter cluster LQAS methodologies and provide recommendations for choosing a cluster LQAS design. We compare technical differences in the three methods and determine situations in which the choice of method results in a substantively different design. We consider two different aspects of the methods: the distributional assumptions and the clustering parameterization. Further, we provide software tools for implementing each method and clarify misconceptions about these designs in the literature. We illustrate the differences in these methods using vaccination and nutrition cluster LQAS surveys as example designs. The cluster methods are not sensitive to the distributional assumptions but can result in substantially different designs (sample sizes) depending on the clustering parameterization. However, none of the clustering parameterizations used in the existing methods appears to be consistent with the observed data, and, consequently, choice between the cluster LQAS methods is not straightforward. Further research should attempt to characterize clustering patterns in specific applications and provide suggestions for best-practice cluster LQAS designs on a setting-specific basis.

  12. Evaluation of immunization coverage by lot quality assurance sampling compared with 30-cluster sampling in a primary health centre in India.

    OpenAIRE

    Singh, J.; Jain, D. C.; Sharma, R. S.; Verghese, T.

    1996-01-01

    The immunization coverage of infants, children and women residing in a primary health centre (PHC) area in Rajasthan was evaluated both by lot quality assurance sampling (LQAS) and by the 30-cluster sampling method recommended by WHO's Expanded Programme on Immunization (EPI). The LQAS survey was used to classify 27 mutually exclusive subunits of the population, defined as residents in health subcentre areas, on the basis of acceptable or unacceptable levels of immunization coverage among inf...

  13. Weight gain in newborns submitted to skin-to-skin contact

    Directory of Open Access Journals (Sweden)

    Ana Karine da Costa Monteiro Souza

    Full Text Available ABSTRACT Purpose: to compare the weight gain among newborns submitted to the kangaroo method and those not submitted to it, and to analyze the factors that may influence this gain: length of hospital stay, gestational age, corrected gestational age, birth weight, weight on the first day of follow-up, duration of gastric tube feeding, duration of oral feeding, and type of diet. Methods: a cross-sectional, quantitative study, with 86 newborns divided into two groups: group 1, with 48 neonates undergoing skin-to-skin contact and Group 2, 38 newborns who did not have this contact. Weights were recorded until hospital discharge. Results: a greater weight gain in Group 1, a longer time of hospitalization in Group 2, and a significant difference in weight gain related to the type of diet in Group 2. Conclusion: skin-to-skin contact has a positive influence on weight gain and length of hospital stay of newborns. The use of an infant formula does not influence weight gain for dyads who experienced skin-to-skin contact. Gestational age, corrected gestational age, birth weight, weight on the first day of follow-up, duration of gastric tube feeding, duration of oral feeding are not correlated with weight gain.

  14. 77 FR 70828 - Proposed Extension of Information Collection Requests Submitted for Public Comment

    Science.gov (United States)

    2012-11-27

    ... DEPARTMENT OF LABOR Employee Benefits Security Administration Proposed Extension of Information Collection Requests Submitted for Public Comment AGENCY: Employee Benefits Security Administration... collection requirements and provide the requested data in the desired format. The Employee Benefits Security...

  15. 78 FR 30333 - Proposed Extension of Information Collection Requests Submitted for Public Comment

    Science.gov (United States)

    2013-05-22

    ... DEPARTMENT OF LABOR Employee Benefits Security Administration Proposed Extension of Information Collection Requests Submitted for Public Comment AGENCY: Employee Benefits Security Administration... collection requirements and provide the requested data in the desired format. The Employee Benefits Security...

  16. Growing Lots of Food Very Fast Can Hurt our Water for a Long Time, Longer Than You Might Think

    Science.gov (United States)

    Van Meter, K. J.; Basu, N. B.

    2016-12-01

    More people arrive here every day, and we keep trying to grow enough food for them to eat. We try to grow more and more by adding things that can hurt our water and our air. We try to keep track of these things that we add, but we don't understand where it all goes. We don't understand how much is in the ground. We don't understand how much is in the water under the ground. We don't understand how long the water will be bad, even after we stop adding things to help grow more food. Many people have tried to stop adding these things, or to stop these things from getting to the water, and they get sad when they have worked hard to do better but the water stays bad. In our work, we try to help people understand how to make the water better, even when they have to grow a lot of food. We have looked at the ground all around where people grow a lot of food, and have found that some of the bad things stay behind in the ground. This means that even when we work hard to make our water good, the things left in the ground might make our water stay bad for a long time. We tried to find out how long it would take to make our water good if we are working our hardest to be better. It will take longer than you might think, maybe three times as many years as you have fingers.

  17. An Evaluation of Dynamic Partial Reconfiguration for Signal and Image Processing in Professional Electronics Applications

    Directory of Open Access Journals (Sweden)

    Aulagnier Denis

    2008-01-01

    Full Text Available Abstract Signal and image processing applications require a lot of computing resources. For low-volume applications like in professional electronics applications, FPGA are used in combination with DSP and GPP in order to reach the performances required by the product roadmaps. Nevertheless, FPGA designs are static, which raises a flexibility issue with new complex or software defined applications like software-defined radio (SDR. In this scope, dynamic partial reconfiguration (DPR is used to bring a virtualization layer upon the static hardware of FPGA. During the last decade, DPR has been widely studied in academia. Nevertheless, there are very few real applications using it, and therefore, there is a lack of feedback providing relevant issues to address in order to improve its applicability. This paper evaluates the interest and limitations when using DPR in professional electronics applications and provides guidelines to improve its applicability. It makes a fair evaluation based on experiments made on a set of signal and image processing applications. It identifies the missing elements of the design flow to use DPR in professional electronics applications. Finally, it introduces a fast reconfiguration manager providing an 84-time improvement compared to the vendor solution.

  18. Tier2 Submit Software

    Science.gov (United States)

    Download this tool for Windows or Mac, which helps facilities prepare a Tier II electronic chemical inventory report. The data can also be exported into the CAMEOfm (Computer-Aided Management of Emergency Operations) emergency planning software.

  19. Teste de envelhecimento acelerado para avaliação do vigor de lotes de sementes de Sebastiania commersoniana (Baill. Smith & Downs (branquilho – Euphorbiaceae. Accelerated aging test to evaluation of the vigor of Sebastiania commersoniana (Baill. Smith & Downs seeds lots.

    Directory of Open Access Journals (Sweden)

    Sérgio Roberto Garcia dos SANTOS

    2007-06-01

    Full Text Available Este trabalho teve por objetivo estabeleceruma metodologia específica para a condução doteste de envelhecimento acelerado para lotes desementes de Sebastiania commersoniana. Para tanto,foram utilizados três lotes de sementesacondicionadas em embalagens de vidro, pano eplástico, e armazenadas por seis meses, em bancadade laboratório. No teste de envelhecimento acelerado(EA, foram estudados os períodos de envelhecimentode 0, 24, 48, 72, 96 e 120 horas, a 42 e 45 ºC.O teste de EA foi conduzido pelo método gerbox.O envelhecimento das sementes foi feito emcâmaras modelo jaqueta d’água. Após cada períodode envelhecimento, as sementes foram submetidasao teste de germinação, em quatro repetições de25 sementes, avaliando a porcentagem e o índicede velocidade de germinação. O delineamentoexperimental adotado foi o inteiramente casualizado,no esquema fatorial 3 x 6, para cada temperatura.As médias entre os lotes foram comparadas peloteste Tukey a 5% de probabilidade, e o comportamentode cada lote foi analisado por regressão polinomial.O período de envelhecimento recomendado para obranquilho é de 96 horas a 45 ºC.The objective of this work was toestablish a specific methodology for the acceleratedaging test in Sebastiania commersoniana seeds.Three seed lots were used, which were packed insmall bottle container, cloth, and plastic, and storedat room temperature for six months. Severalperiods of aging were studied (0, 24, 48, 72, 96 and120 hours at 42 and 45 oC in the accelerated aging(AA test. Accelerated aging test was conducted bythe gerbox method. The aging of the seeds wasdone in water jacket model chambers. After eachperiod of aging, the seeds were submitted to thegermination test, in 4 repetitions of 25 seeds,evaluating the percentage and the speed germinationindex and comparing the results with the germinationstandard test. The adopted experimental line wasthe whole fortuitous in the factorial 3 x 6 scheme,to each

  20. Radiation disinfestation of used packagings: irradiation trials with electron beams

    International Nuclear Information System (INIS)

    Ignatowicz, S.; Zaedee, I.

    1994-01-01

    Used bags, sacks and other packagings are often infested with insects and mites - pest of stored products. Such packagings provide a source of infestation of a new lot or unit of agricultural products. Cleaning of repeatedly used packages is the most important preventive method. After using, the bags and sacks should be carefully beaten with a mechanical or hand beater. When pests are found, the packages should be disinfested with hot air or hot water. Larger numbers of bags are usually fumigated in a special fumigation chamber. Disinfestation by radiation processing is potentially a feasible substitute for chemical fumigation. In the present paper trials of radiation disinfestation of used bags are described and discussed. Information about using electron beams for pest disinfestation of jute and polyvinyl chloride bags (plastic bags) is provided. The absorbed dose is the most important irradiation process parameter. The lethal effects equivalent to chemical insecticides are obtained by high doses of ionizing radiation. Control of insect and/or mite infestation of the repeatedly used packagings may be secured by ionizing radiation applied at 2-3 kGy. These doses result in complete mortality of stored product pests within a few days. The radiation must penetrate deeply into the target product at sufficient level. Gamma rays and X-rays penetrate into the treated products easily but electron radiation penetrating is much lower, depending on electron energy applied. The results of this study indicate that bags made of polyvinyl chloride may be disinfested with electron beams when are created as separate units or batches up to 50 bags. Penetrability of jute bags is lower than the plastic bags. Therefore the jute bags should be irradiated with electrons as batches containing no more than 30 bags. (author)

  1. Optimization of deformations and hoop stresses in TSV liners to boost interconnect reliability in electronic appliances

    Science.gov (United States)

    Juma, Mary Atieno; Zhang, Xuliang; He, Song Bai; Abusabah, Ahmed I. A.

    2015-12-01

    Recently, there has been a lot of research with electronic products because more and different functions are integrated into devices and the final product sizes have to be small to meet the market demand. A lot of research has been done on the (TSVs) Through Silicon Vias. In this paper, through silicon via liners are investigated. The liners: silicon dioxide, polystyrene and polypropylene carbonate are exposed to pressure on their inner surfaces and this yielded hoop stresses within their thickness. Deflections too occurred and this is a proof that deformation really took place. In one of our papers, hoop stresses for the same materials were investigated. The values were a little higher but different for each material used. In this paper, we use global cylindrical, partial cylinder model with different theta in Analysis system 14 to model the through silicon via liners. The values are lower meaning the reliability of the liners have been optimized and boosted. However, silicon dioxide liner had the lowest hoop stress around its circumference and lowest deflection value meaning that it's still one of the most reliable materials in the manufacture of through silicon via liners in the industry; but overdependence can be avoided if the other liners are used too.

  2. 34 CFR 35.4 - Administrative claim; evidence and information to be submitted.

    Science.gov (United States)

    2010-07-01

    ... the interval between injury and death. (8) Any other evidence or information which may have a bearing...) Death. In support of a claim based on death, the claimant may be required to submit the following evidence or information: (1) An authenticated death certificate or other competent evidence showing cause...

  3. 75 FR 80861 - Agency Forms Submitted for OMB Review, Request for Comments

    Science.gov (United States)

    2010-12-23

    ... collection techniques or other forms of information technology. Comments to RRB or OIRA must contain the OMB..., information needed to ensure secure system access from employers who voluntarily opt to use the RRB's Internet... (RRB) is submitting five (5) Information Collection Requests (ICR) to the Office of Information and...

  4. 40 CFR 355.21 - In what format should the information be submitted?

    Science.gov (United States)

    2010-07-01

    ... (CONTINUED) SUPERFUND, EMERGENCY PLANNING, AND COMMUNITY RIGHT-TO-KNOW PROGRAMS EMERGENCY PLANNING AND NOTIFICATION Emergency Planning How to Comply § 355.21 In what format should the information be submitted? EPA... 40 Protection of Environment 27 2010-07-01 2010-07-01 false In what format should the information...

  5. 21 CFR 803.32 - If I am a user facility, what information must I submit in my individual adverse event reports?

    Science.gov (United States)

    2010-04-01

    ... elements of FDA Form 3500A: (a) Patient information (Form 3500A, Block A). You must submit the following...) Device information (Form 3500A, Block D). You must submit the following: (1) Brand name; (2) Type of...

  6. Stability of fault submitted to fluid injections

    Science.gov (United States)

    Brantut, N.; Passelegue, F. X.; Mitchell, T. M.

    2017-12-01

    Elevated pore pressure can lead to slip reactivation on pre-existing fractures and faults when the coulomb failure point is reached. From a static point of view, the reactivation of fault submitted to a background stress (τ0) is a function of the peak strength of the fault, i.e. the quasi-static effective friction coefficient (µeff). However, this theory is valid only when the entire fault is affected by fluid pressure, which is not the case in nature, and during human induced-seismicity. In this study, we present new results about the influence of the injection rate on the stability of faults. Experiments were conducted on a saw-cut sample of westerly granite. The experimental fault was 8 cm length. Injections were conducted through a 2 mm diameter hole reaching the fault surface. Experiments were conducted at four different order magnitudes fluid pressure injection rates (from 1 MPa/minute to 1 GPa/minute), in a fault system submitted to 50 and 100 MPa confining pressure. Our results show that the peak fluid pressure leading to slip depends on injection rate. The faster the injection rate, the larger the peak fluid pressure leading to instability. Wave velocity surveys across the fault highlighted that decreasing the injection-rate leads to an increase of size of the fluid pressure perturbation. Our result demonstrate that the stability of the fault is not only a function of the fluid pressure requires to reach the failure criterion, but is mainly a function of the ratio between the length of the fault affected by fluid pressure and the total fault length. In addition, we show that the slip rate increases with the background effective stress and with the intensity of the fluid pressure pertubation, i.e. with the excess shear stress acting on the part of the fault pertubated by fluid injection. Our results suggest that crustal fault can be reactivated by local high fluid overpressures. These results could explain the "large" magnitude human-induced earthquakes

  7. Fetal dose determination in patients with breast cancer submitted to radiotherapy

    International Nuclear Information System (INIS)

    Melo, H.C.; Roesler, I.C.; Leon, E.

    1985-01-01

    The exposure that the fetus receive during radiotherapy treatment for patients with breast cancer submitted to cobalt 60 and linear accelerator of 6 MV is studied. Measurements with a rando-Alderson Phantom and ionization chamber for each individualized irradiation field, at the body level where the fetus is localized during the several stages of pregnancy, are made. (M.A.C.) [pt

  8. 14 CFR 120.11 - Refusal to submit to a drug or alcohol test by a Part 61 certificate holder.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Refusal to submit to a drug or alcohol test...: CERTIFICATION AND OPERATIONS DRUG AND ALCOHOL TESTING PROGRAM Individuals Certificated Under Parts 61, 63, and 65 § 120.11 Refusal to submit to a drug or alcohol test by a Part 61 certificate holder. (a) This...

  9. 14 CFR 120.15 - Refusal to submit to a drug or alcohol test by a Part 65 certificate holder.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Refusal to submit to a drug or alcohol test...: CERTIFICATION AND OPERATIONS DRUG AND ALCOHOL TESTING PROGRAM Individuals Certificated Under Parts 61, 63, and 65 § 120.15 Refusal to submit to a drug or alcohol test by a Part 65 certificate holder. (a) This...

  10. 14 CFR 120.13 - Refusal to submit to a drug or alcohol test by a Part 63 certificate holder.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Refusal to submit to a drug or alcohol test...: CERTIFICATION AND OPERATIONS DRUG AND ALCOHOL TESTING PROGRAM Individuals Certificated Under Parts 61, 63, and 65 § 120.13 Refusal to submit to a drug or alcohol test by a Part 63 certificate holder. (a) This...

  11. Quality of life in patients submitted to radical prostatectomy

    OpenAIRE

    Débora Moura Miranda Goluart; Mário Alfredo Silveira Miranzi; Paulo Eduardo Nunes Goulart

    2014-01-01

    A cross-sectional study with a descriptive analysis of 81 patients submitted to radical prostatectomy (RP). Our objective was to correlate quality of life (QL) according to the EORTC-QLQ C30 with age group and time after surgery. Mean age was 65.7 years. Most sought the care of urology, asymptomatic. Some referred former smoking (49.9%) and high blood pressure (53.1%). Mean preoperative SBP was 8.4 ng/ml. Most participants were in stages T2c to T3, Gleason ?6 and over a year after surgery. Er...

  12. In vitro analysis of different properties of acrylic resins for ocular prosthesis submitted to accelerated aging with or without photopolymerized glaze

    International Nuclear Information System (INIS)

    Santos, Daniela Micheline dos; Nagay, Bruna Egumi; Freitas da Silva, Emily Vivianne; Bonatto, Liliane da Rocha; Sonego, Mariana Vilela; Moreno, Amália; Rangel, Elidiane Cipriano; Cruz, Nilson Cristino da; Goiato, Marcelo Coelho

    2016-01-01

    The effect of a photopolymerized glaze on different properties of acrylic resin (AR) for ocular prostheses submitted to accelerated aging was investigated. Forty discs were divided into 4 groups: N1 AR without glaze (G1); colorless AR without glaze (G2); N1 AR with glaze (G3); and colorless AR with glaze (G4). All samples were polished with sandpaper (240, 600 and 800-grit). In G1 and G2, a 1200-grit sandpaper was also used. In G3 and G4, samples were coated with MegaSeal glaze. Property analysis of color stability, microhardness, roughness, and surface energy, and assays of atomic force microscopy, scanning electron microscopy, and energy-dispersive spectroscopy were performed before and after the accelerated aging (1008 h). Data were submitted to the ANOVA and Tukey Test (p < 0.05). Groups with glaze exhibited statistically higher color change and roughness after aging. The surface microhardness significantly decreased in groups with glaze and increased in groups without glaze. The surface energy increased after the aging, independent of the polishing procedure. All groups showed an increase of surface irregularities. Photopolymerized glaze is an inadequate surface treatment for AR for ocular prostheses and it affected the color stability, roughness, and microhardness. The accelerated aging interfered negatively with the properties of resins. - Highlights: • We analyzed the influence of polishing on two acrylic resins for ocular prosthesis. • We performed different analyzes of esthetic, mechanical and physical properties. • The glaze is an inadequate surface treatment to ocular prosthesis acrylic resin.

  13. In vitro analysis of different properties of acrylic resins for ocular prosthesis submitted to accelerated aging with or without photopolymerized glaze

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Daniela Micheline dos, E-mail: danielamicheline@foa.unesp.br [Department of Dental Materials and Prosthodontics, Aracatuba Dental School, Sao Paulo State University (UNESP), Aracatuba, Sao Paulo (Brazil); Nagay, Bruna Egumi; Freitas da Silva, Emily Vivianne; Bonatto, Liliane da Rocha; Sonego, Mariana Vilela [Department of Dental Materials and Prosthodontics, Aracatuba Dental School, Sao Paulo State University (UNESP), Aracatuba, Sao Paulo (Brazil); Moreno, Amália [Department of Oral Surgery and Pathology, School of Dentistry, Federal University of Minas Gerais (UFMG), Belo Horizonte, Minas Gerais (Brazil); Rangel, Elidiane Cipriano; Cruz, Nilson Cristino da [Technological Plasma Laboratory (LaPTec), Experimental Campus of Sorocaba, UNESP, Sorocaba, Sao Paulo (Brazil); Goiato, Marcelo Coelho [Department of Dental Materials and Prosthodontics, Aracatuba Dental School, Sao Paulo State University (UNESP), Aracatuba, Sao Paulo (Brazil)

    2016-12-01

    The effect of a photopolymerized glaze on different properties of acrylic resin (AR) for ocular prostheses submitted to accelerated aging was investigated. Forty discs were divided into 4 groups: N1 AR without glaze (G1); colorless AR without glaze (G2); N1 AR with glaze (G3); and colorless AR with glaze (G4). All samples were polished with sandpaper (240, 600 and 800-grit). In G1 and G2, a 1200-grit sandpaper was also used. In G3 and G4, samples were coated with MegaSeal glaze. Property analysis of color stability, microhardness, roughness, and surface energy, and assays of atomic force microscopy, scanning electron microscopy, and energy-dispersive spectroscopy were performed before and after the accelerated aging (1008 h). Data were submitted to the ANOVA and Tukey Test (p < 0.05). Groups with glaze exhibited statistically higher color change and roughness after aging. The surface microhardness significantly decreased in groups with glaze and increased in groups without glaze. The surface energy increased after the aging, independent of the polishing procedure. All groups showed an increase of surface irregularities. Photopolymerized glaze is an inadequate surface treatment for AR for ocular prostheses and it affected the color stability, roughness, and microhardness. The accelerated aging interfered negatively with the properties of resins. - Highlights: • We analyzed the influence of polishing on two acrylic resins for ocular prosthesis. • We performed different analyzes of esthetic, mechanical and physical properties. • The glaze is an inadequate surface treatment to ocular prosthesis acrylic resin.

  14. Bleaching agent action on color stability, surface roughness and microhardness of composites submitted to accelerated artificial aging.

    Science.gov (United States)

    Rattacaso, Raphael Mendes Bezerra; da Fonseca Roberti Garcia, Lucas; Aguilar, Fabiano Gamero; Consani, Simonides; de Carvalho Panzeri Pires-de-Souza, Fernanda

    2011-04-01

    The purpose of this study was to evaluate the bleaching agent action on color stability, surface roughness and microhardness of composites (Charisma, Filtek Supreme and Heliomolar - A2) submitted to accelerated artificial aging (AAA). A Teflon matrix (12 x 2 mm) was used to fabricate 18 specimens (n=6) which, after polishing (Sof-Lex), were submitted to initial color reading (ΔE), Knoop microhardness (KHN) (50 g/15 s load) and roughness (R(a)) (cut-off 0.25 mm) tests. Afterwards, the samples were submitted to AAA for 384 hours and new color, microhardness and roughness readings were performed. After this, the samples were submitted to daily application (4 weeks) of 16% Carbamide Peroxide (NiteWhite ACP) for 8 hours and kept in artificial saliva for 16 hours. New color, microhardness and roughness readings were made at the end of the cycle, and 15 days after bleaching. Comparison of the ΔE means (2-way ANOVA, Bonferroni, P<.05) indicated clinically unacceptable color alteration for all composites after AAA, but without significant difference. Statistically significant increase in the KHN values after AAA was observed, but without significant alterations 15 days after bleaching. For R(a) there was no statistically significant difference after AAA and 15 days after bleaching. The alterations promoted by the bleaching agent and AAA are material dependent.

  15. Theory of substrate, Zeeman, and electron-phonon interaction effects on the quantum capacitance in graphene

    KAUST Repository

    Tahir, M.; Sabeeh, K.; Schwingenschlö gl, Udo; Shaukat, A.

    2013-01-01

    Since the discovery of graphene, a lot of interest has been attracted by the zeroth Landau level, which has no analog in the conventional two dimensional electron gas. Recently, lifting of the spin and valley degeneracies has been confirmed experimentally by capacitance measurements, while in transport experiments, this is difficult due to the scattering in the device. In this context, we model interaction effects on the quantum capacitance of graphene in the presence of a perpendicular magnetic field, finding good agreement with experiments. We demonstrate that the valley degeneracy is lifted by the substrate and by Kekule distortion, whereas the spin degeneracy is lifted by Zeeman interaction. The two cases can be distinguished by capacitance measurements.

  16. Theory of substrate, Zeeman, and electron-phonon interaction effects on the quantum capacitance in graphene

    KAUST Repository

    Tahir, M.

    2013-12-10

    Since the discovery of graphene, a lot of interest has been attracted by the zeroth Landau level, which has no analog in the conventional two dimensional electron gas. Recently, lifting of the spin and valley degeneracies has been confirmed experimentally by capacitance measurements, while in transport experiments, this is difficult due to the scattering in the device. In this context, we model interaction effects on the quantum capacitance of graphene in the presence of a perpendicular magnetic field, finding good agreement with experiments. We demonstrate that the valley degeneracy is lifted by the substrate and by Kekule distortion, whereas the spin degeneracy is lifted by Zeeman interaction. The two cases can be distinguished by capacitance measurements.

  17. Theory of substrate, Zeeman, and electron-phonon interaction effects on the quantum capacitance in graphene

    International Nuclear Information System (INIS)

    Tahir, M.; Sabeeh, K.; Shaukat, A.; Schwingenschlögl, U.

    2013-01-01

    Since the discovery of graphene, a lot of interest has been attracted by the zeroth Landau level, which has no analog in the conventional two dimensional electron gas. Recently, lifting of the spin and valley degeneracies has been confirmed experimentally by capacitance measurements, while in transport experiments, this is difficult due to the scattering in the device. In this context, we model interaction effects on the quantum capacitance of graphene in the presence of a perpendicular magnetic field, finding good agreement with experiments. We demonstrate that the valley degeneracy is lifted by the substrate and by Kekule distortion, whereas the spin degeneracy is lifted by Zeeman interaction. The two cases can be distinguished by capacitance measurements

  18. 21 CFR 1.402 - What are the requirements for submitting an appeal?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false What are the requirements for submitting an appeal? 1.402 Section 1.402 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL GENERAL ENFORCEMENT REGULATIONS Administrative Detention of Food for Human or Animal...

  19. 41 CFR 301-52.6 - How do I submit a travel claim?

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 4 2010-07-01 2010-07-01 false How do I submit a travel claim? 301-52.6 Section 301-52.6 Public Contracts and Property Management Federal Travel Regulation System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES ARRANGING FOR TRAVEL SERVICES, PAYING TRAVEL EXPENSES, AND...

  20. 77 FR 5858 - Agency Forms Submitted for OMB Review, Request for Comments

    Science.gov (United States)

    2012-02-06

    ... Regulatory Affairs (OIRA), Office of Management and Budget (OMB). Our ICR describes the information we seek... requiring an applicant to submit documentary evidence of marriage are prescribed in 20 CFR 219.30. In the absence of documentary evidence, the RRB needs to determine if a valid marriage existed between a spouse...