Graphic Description: The Mystery of Ibn Khafaja\\'s Success in Description

Directory of Open Access Journals (Sweden)

جواد رنجبر

2009-12-01

Full Text Available Graphic Description:   The Mystery of Ibn Khafaja's Success in Description    Ali Bagher Taheriniya *  Javad Ranjbar **      Abstract Ibn Khafaja is one of the poets and men of letters in Spain. He is titled to Sanobari of Spain. He is one of the masters of description. Hence, the analysis of successful techniques he has used in the descriptive art could illuminate the way for others. Al-Taswir al-harfi (graphic description is a term which denotes the highest and most detailed poems. On this basis, the best descriptive poem is one which is closer to a painting. He has used some elements called conforming elements of description which contain: imagination, feeling, faculty, and dialogue as well as three other elements: to be inborn in description, enchanting nature and convenient life. This article is going to give an analysis of the reasons for Ibn Khafaja’s success in description and portrait making.   Key words: Ibn Khafaja, poetry, description, portrait   * Associate Professor, Bu Ali Sina University of Hamadan E-mail: bTaheriniya@yahoo.com  ** M.A. in Arabic Language and Literature

Hardware description languages

Science.gov (United States)

Tucker, Jerry H.

1994-01-01

Hardware description languages are special purpose programming languages. They are primarily used to specify the behavior of digital systems and are rapidly replacing traditional digital system design techniques. This is because they allow the designer to concentrate on how the system should operate rather than on implementation details. Hardware description languages allow a digital system to be described with a wide range of abstraction, and they support top down design techniques. A key feature of any hardware description language environment is its ability to simulate the modeled system. The two most important hardware description languages are Verilog and VHDL. Verilog has been the dominant language for the design of application specific integrated circuits (ASIC's). However, VHDL is rapidly gaining in popularity.

$T$-violation and $CPT$-invariance measurements in the CPLEAR experiment a detailed description of the analysis of neutral-kaon decays to $e\\pi\

CERN Document Server

Angelopoulos, Angelos; Backenstoss, Gerhard; Bargassa, P; Behnke, O; Benelli, A; Bertin, V; Blanc, F; Bloch, P; Carlson, P J; Carroll, M; Cawley, E; Chertok, M B; Danielsson, M; Dejardin, M; Derré, J; Ealet, A; Eleftheriadis, C; Fetscher, W; Fidecaro, Maria; Filipcic, A; Francis, D; Fry, J; Gabathuler, Erwin; Gamet, R; Gerber, H J; Go, A; Haselden, A; Hayman, P J; Henry-Coüannier, F; Hollander, R W; Jon-And, K; Kettle, P R; Kokkas, P; Kreuger, R; Le Gac, R; Leimgruber, F; Mandic, I; Manthos, N; Marel, Gérard; Mikuz, M; Miller, J; Montanet, François; Müller, A; Nakada, Tatsuya; Pagels, B; Papadopoulos, I M; Pavlopoulos, P; Polivka, G; Rickenbach, R; Roberts, B L; Ruf, T; Sakelliou, L; Schäfer, M; Schaller, L A; Schietinger, T; Schopper, A; Tauscher, Ludwig; Thibault, C; Touchard, F; Touramanis, C; van Eijk, C W E; Vlachos, S; Weber, P; Wigger, O; Wolter, M; Zavrtanik, D; Zimmerman, D

2001-01-01

A detailed description of the analysis of neutral kaons decaying to \\pen\\ is given, based on the complete set of data collected with the CPLEAR experiment. Using a novel approach involving initially strangeness-tagged \\kn\\ and \\knb , time-dependent decay-rate asymmetries were measured. These asymmetries enabled \\Tz - and \\CPTz -violation parameters to be measured in the context of a systematic study. The highlights of this study are the first direct observation of \\Tz\\ violation and the direct determination of the \\CPTz\\ parameter \\red\\ with an accuracy improved by two orders of magnitude with respect to the current value.

CRAC2 model description

International Nuclear Information System (INIS)

Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

1984-03-01

The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions

Brief description of the Wackersdorf Reprocessing Facility

International Nuclear Information System (INIS)

1986-01-01

The DWK is now planning the construction and operation of a facility for the reprocessing of spent fuel elements and the fabrication of mixed-oxide fuel elements which will initially have an average daily throughput of 2 tons (t) of nuclear fuel. The application required by the Atomic Law was submitted to the Bavarian State Ministry for State Development and Environmental Matters on October 28, 1982. According to Par. 3, Section 1, No. 1 of the Atomic Law Procedural Ordinance such an application for permission in accordance with par. 7 AtL must explicitly be accompanied by a safety report which shall make it possible for third parties to make a judgment whether the impacts associated with the facility and its operation could damage their rights. The safety report is intended to present and explain the concept of the facility, the safety-technological design bases, and the operation of the plant, including its operation and safety systems and the impacts and proposed preventive measures. In addition to the detailed presentations in the safety report, Par. 3 of the Atomic Law Procedural Ordinance also requires a brief description of the plant designed for general public understanding, suitable for the design, which will also explain the expected impacts on the general environment and the surrounding area. Hence the brief description presents and explains the following matters: the site; the technology and state of the art for reprocessing of spent nuclear fuel; the structure and function of the proposed facility; safety provisions of the proposed facility and the management of perturbations in operation; the impacts of the facility and its operation on the environment; measures to be taken for dealing with the radioactive wastes; and provisions for ultimate shut-down of the facility

An analysis of the titles of papers submitted to the UK REF in 2014: authors, disciplines, and stylistic details

OpenAIRE

Hudson, John

2016-01-01

In 2014 over 52,000 academics submitted >155,500 journal articles in 36 different disciplines for assessment in the UK?s four-year Research Evaluation Framework (the REF). In this paper the characteristics of the titles of these papers are assessed. Although these varied considerably between the disciplines, the main findings were that: (i) the lengths of the titles increased with the number of authors in almost all disciplines, (ii) the use of colons and question marks tended to decline with...

Experience of families of children and adolescents submitted to Hematopoietic Stem Cell Transplantation

Directory of Open Access Journals (Sweden)

Verônica de Azevedo Mazza

2016-12-01

Full Text Available A descriptive study with a qualitative approach to describe how families of children and adolescents submitted to Hematopoietic Stem Cell Transplantation went through this experience. We conducted semi-structured interviews with 16 relatives of children and adolescents submitted to transplantation between December of 2014 to March of 2015 at the bone marrow transplantation service at a university hospital located at the South of Brazil. We analyzed the data with steps described by Creswell, with the support of the software IRAMUTEQ. From this analysis, the emerging categories were: the mother as an active subject in the transplantation process; family experience with the transplantation; transplantation impact for the child and/or adolescent; and, transplantation: from fear to hope. Considering our results, it is possible to ponderate about the care provided by the nursing team, becoming indispensable for these professionals to plan assistance focused not only on the patient but the whole family nucleus.

COG Software Architecture Design Description Document

International Nuclear Information System (INIS)

Buck, R.M.; Lent, E.M.

2009-01-01

This COG Software Architecture Design Description Document describes the organization and functionality of the COG Multiparticle Monte Carlo Transport Code for radiation shielding and criticality calculations, at a level of detail suitable for guiding a new code developer in the maintenance and enhancement of COG. The intended audience also includes managers and scientists and engineers who wish to have a general knowledge of how the code works. This Document is not intended for end-users. This document covers the software implemented in the standard COG Version 10, as released through RSICC and IAEA. Software resources provided by other institutions will not be covered. This document presents the routines grouped by modules and in the order of the three processing phases. Some routines are used in multiple phases. The routine description is presented once - the first time the routine is referenced. Since this is presented at the level of detail for guiding a new code developer, only the routines invoked by another routine that are significant for the processing phase that is being detailed are presented. An index to all routines detailed is included. Tables for the primary data structures are also presented.

Role of the hospitalist in antimicrobial stewardship: a review of work completed and description of a multisite collaborative.

Science.gov (United States)

Rohde, Jeffrey M; Jacobsen, Diane; Rosenberg, David J

2013-06-01

Historically, antimicrobial stewardship programs have been led by infectious-disease physicians and pharmacists. With the growing presence of hospitalists in health and hospital systems, combined with their focus on quality improvement and patient safety, this emerging medical specialty has the potential to fill essential roles in antimicrobial stewardship programs. The goal of this article was to present the reasons hospitalists are ideally positioned to fill antimicrobial-stewardship roles, a narrative review of previously reported hospitalist-led antibiotic-stewardship projects, and a description of an ongoing multisite collaborative by the Institute for Healthcare Improvement (IHI) and the Centers for Disease Control and Prevention (CDC). A review of the published literature was performed, including an extensive review of the abstracts submitted to the Society of Hospital Medicine annual meetings. A number of examples of hospitalists developing and leading antimicrobial-stewardship programs are described. The details of a current multisite IHI/CDC hospitalist-focused initiative are discussed in detail. Hospitalists are actively involved with, and even lead, a variety of antimicrobial-stewardship programs in several different hospital systems. A large, multisite collaborative focused on hospitalist-led antimicrobial stewardship is currently in progress. Copyright © 2013 Elsevier HS Journals, Inc. All rights reserved.

A report to Congress Nuclear Regulatory Research: Project descriptions for FY88

International Nuclear Information System (INIS)

1988-08-01

This report has been written in response to a request of the United States Congress that the Nuclear Regulatory Commission prepare and submit to the Congress a summary description of its research projects. Commercial contracts and research efforts at the Department of Energy (DOE) laboratories are assigned a five-digit financial number (FIN). This report provides a project descriptions for each FIN number. The project descriptions are divided into five major sections called program areas. These areas are: integrity of reactor components, prevent damage to reactor cores, reactor containment safety, confirming safety of nuclear waste disposal, and resolving safety issues and developing regulations. An explanation of each program area is given in an overview at the beginning of each section

T-violation and CPT-invariance measurements in the CPLEAR experiment: a detailed description of the analysis of neutral-kaon decays to eπν

International Nuclear Information System (INIS)

Angelopoulos, A.; Aslanides, E.; Backenstoss, G.

2001-01-01

A detailed description of the analysis of neutral kaons decaying to eπν is given, based on the complete set of data collected with the CPLEAR experiment. Using a novel approach involving initially strangeness-tagged K 0 and K 0 , time-dependent decay-rate asymmetries were measured. These asymmetries enabled T- and CPT-violation parameters to be measured in the context of a systematic study. The highlights of this study are the first direct observation of T violation and the direct determination of the CPT parameter Re(δ) with an accuracy improved by two orders of magnitude with respect to the current value. (orig.)

Evaluating laboratory request forms submitted to haematology and blood transfusion departments at a hospital in Northwest Nigeria

Directory of Open Access Journals (Sweden)

Feyisayo Jegede

2016-05-01

Objective: We assessed routinely-submitted LRFs to determine the degree of correctness, completeness and consistency. Methods: LRFs submitted to the Department of Haematology (DH and Blood Transfusion Services (BTS of Aminu Kano Teaching Hospital in Kano, Nigeria, between October 2014 and December 2014, were evaluated for completion of all items on the forms. Performance in four quality indicator domains, including patient identifiers, test request details, laboratory details and physician details, was derived as a composite percentage. Results: Of the 2084 LRFs evaluated, 999 were from DH and 1085 from BTS. Overall, LRF completeness was 89.5% for DH and 81.2% for BTS. Information on patient name, patient location and laboratory number were 100% complete for DH, whereas only patient name was 100% complete for BTS. Incomplete information was mostly encountered on BTS forms for physician’s signature (60.8% and signature of laboratory receiver (63.5%. None of the DH and only 9.4% of BTS LRFs met all quality indicator indices. Conclusion: The level of completion of LRFs from these two departments was suboptimal. This underscores the need to review and redesign the LRF, improve on training and communication between laboratory and clinical staff and review specimen rejection practices.

TMACS system description

International Nuclear Information System (INIS)

Scaief, C.C.

1995-01-01

This document provides a description of the Tank Monitor and Control System (TMACS). It is intended as an introduction for those persons unfamiliar with the system as well as a reference document for the users, maintenance personnel, and system designers. In addition to describing the system, the document outlines the associated drawing documentation, provides maintenance and spare parts information, and discusses other TMACS documents that provide additional detail

Advisory processes and their descriptive data

Directory of Open Access Journals (Sweden)

Milan Mišovič

2005-01-01

Full Text Available Processes are regarded as a representative of all firm activities what is valid for Web-based Advisory Systems, too. Interpretation of processes from the both sides managers and informaticians is naturally different what is given by their scientific platforms and observed objectives. Managers have connected all firm processes with the firm prosperity and firm competition ability. Therefore they have followed understanding, modeling and regular improving of all processes what should stimulate and evoke using of process revisions (reengineering. The main role in such process understanding is thus committed to the firm management.The most professional computer process implementations are dominant objectives of Informaticians. In this conception all processes have been understood as real sequences of partial transactions (elementary firm activities and data processed by them regardless of using of a structural or object process approach modeling. The process and transaction models, submitted by informaticians, are connected with process content orientation. This content has to be programmed. The firm management represents the main resource of the process knowledge used by informaticians.In addition to these two process conceptions there is a different approach based on a process description by a descriptive data. The descriptive data are not oriented to a process content but to its theoretical conception and real implementation. The descriptive data processing inside special algebra operations can bring a lot of very important and easily economically interpreted results.

Description of Measurements on Biogas Stations

Directory of Open Access Journals (Sweden)

Ladislav Novosád

2016-08-01

Full Text Available This paper focuses mainly on performance analysis for three biogas stations situated within the territory of the Czech Republic. This paper contains basic details of the individual biogas stations as well as description of their types. It also refers to the general description of the measurement gauge involved, with specifications of its potential use. The final part of this paper deals with the analysis of course data obtained, with special regard to voltage, current, active power and reactive power data.

Vehicle infrastructure integration proof of concept : technical description--vehicle : final report

Science.gov (United States)

2009-05-19

This report provides the technical description of the VII system developed for the Cooperative Agreement VII Program between the USDOT and the VII Consortium. The basic architectural elements are summarized and detailed descriptions of the hardware a...

40 CFR Table 18 to Subpart G of... - Information for Waste Management Units To Be Submitted With Notification of Compliance Status a,b

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Information for Waste Management Units... Subpart G of Part 63—Information for Waste Management Units To Be Submitted With Notification of Compliance Status a,b Waste management unit identification c Description d Wastewater stream(s) received or...

Progress report on first year of WP5.2. Including detailed description of planned research for WP 5.2

Energy Technology Data Exchange (ETDEWEB)

Ellemers, N.; Van Dijk, E.; Terwel, B.; De Vries, G. [Leiden University, Leiden (Netherlands)

2010-10-15

This document contains the progress report on the first half year of the CATO-2 WP5.2 PhD project 'Framing effects in communication about CCS'. In the first few months a literature study has been conducted, both on (factors that influence) public perceptions and acceptance of CCS, and on framing. In the last two month, a first study was designed. This study consists of an experiment designed to examine how framing a company's involvement in CCS in terms of economic benefits and/or CSR of the organization affects the corporate image, trust, and perceived 'greenwashing' (deceit). Furthermore, this experiment serves to test the quality of newly developed questionnaires to measure these variables. In addition, this document contains a detailed description of the research planned for WP5.2 written by senior (CATO-2) researchers from January 2010 on. The objective of the research planned for WP5.2 is to examine whether framing of communications by an organization can improve the perceived credibility and trustworthiness of the organization and the information provided. This issue will be examined by a combination of experimental studies and a survey-type study.

1995 Baseline solid waste management system description

International Nuclear Information System (INIS)

Anderson, G.S.; Konynenbelt, H.S.

1995-09-01

This provides a detailed solid waste system description that documents the treatment, storage, and disposal (TSD) strategy for managing Hanford's solid low-level waste, low-level mixed waste, transuranic and transuranic mixed waste, and greater-than-Class III waste. This system description is intended for use by managers of the solid waste program, facility and system planners, as well as system modelers. The system description identifies the TSD facilities that constitute the solid waste system and defines these facilities' interfaces, schedules, and capacities. It also provides the strategy for treating each of the waste streams generated or received by the Hanford Site from generation or receipt through final destination

The relationship between symbolic interactionism and interpretive description.

Science.gov (United States)

Oliver, Carolyn

2012-03-01

In this article I explore the relationship between symbolic interactionist theory and interpretive description methodology. The two are highly compatible, making symbolic interactionism an excellent theoretical framework for interpretive description studies. The pragmatism underlying interpretive description supports locating the methodology within this cross-disciplinary theory to make it more attractive to nonnursing researchers and expand its potential to address practice problems across the applied disciplines. The theory and method are so compatible that symbolic interactionism appears to be part of interpretive description's epistemological foundations. Interpretive description's theoretical roots have, to date, been identified only very generally in interpretivism and the philosophy of nursing. A more detailed examination of its symbolic interactionist heritage furthers the contextualization or forestructuring of the methodology to meet one of its own requirements for credibility.

Validation of an educative manual for patients with head and neck cancer submitted to radiation therapy 1

Science.gov (United States)

da Cruz, Flávia Oliveira de Almeida Marques; Ferreira, Elaine Barros; Vasques, Christiane Inocêncio; da Mata, Luciana Regina Ferreira; dos Reis, Paula Elaine Diniz

2016-01-01

Abstract Objective: develop the content and face validation of an educative manual for patients with head and neck cancer submitted to radiation therapy. Method: descriptive methodological research. The Theory of Psychometrics was used for the validation process, developed by 15 experts in the theme area of the educative manual and by two language and publicity professionals. A minimum agreement level of 80% was considered to guarantee the validity of the material. Results: the items addressed in the assessment tool of the educative manual were divided in three blocks: objectives, structure and format, and relevance. Only one item, related to the sociocultural level of the target public, obtained an agreement rate manual proposed were attended to. This can contribute to the understanding of the therapeutic process the head and neck cancer patient is submitted to during the radiation therapy, besides supporting clinical practice through the nursing consultation. PMID:27305178

Effective Conformal Descriptions of Black Hole Entropy

Directory of Open Access Journals (Sweden)

Steven Carlip

2011-07-01

Full Text Available It is no longer considered surprising that black holes have temperatures and entropies. What remains surprising, though, is the universality of these thermodynamic properties: their exceptionally simple and general form, and the fact that they can be derived from many very different descriptions of the underlying microscopic degrees of freedom. I review the proposal that this universality arises from an approximate conformal symmetry, which permits an effective “conformal dual” description that is largely independent of the microscopic details.

System Design Description for the TMAD Code

International Nuclear Information System (INIS)

Finfrock, S.H.

1995-01-01

This document serves as the System Design Description (SDD) for the TMAD Code System, which includes the TMAD code and the LIBMAKR code. The SDD provides a detailed description of the theory behind the code, and the implementation of that theory. It is essential for anyone who is attempting to review or modify the code or who otherwise needs to understand the internal workings of the code. In addition, this document includes, in Appendix A, the System Requirements Specification for the TMAD System

How to Submit a Risk Management Plan (RMP) to EPA

Science.gov (United States)

RMP*eSubmit software is the only way to submit RMPs. After you have prepared your plan using RMP*eSubmit, you may also re-submit, correct, or withdraw an RMP. Another electronic tool, RMP*Comp, performs the required off-site consequence analysis.

Data on the descriptive overview and the quality assessment details of 12 qualitative research papers

OpenAIRE

Barnabishvili, Maia; Ulrichs, Timo; Waldherr, Ruth

2016-01-01

This data article presents the supplementary material for the review paper “Role of acceptability barriers in delayed diagnosis of Tuberculosis: Literature review from high burden countries” (Barnabishvili et al., in press) [1]. General overview of 12 qualitative papers, including the details about authors, years of publication, data source locations, study objectives, overview of methods, study population characteristics, as well as the details of intervention and the outcome parameters of t...

Nursing registries of educational actions for patients submitted to hip arthroplasty

Directory of Open Access Journals (Sweden)

Laiana Lauser Silveira

2015-12-01

Full Text Available A retrospective, descriptive study of quantitative approach, aimed to identify nursing registries of educational actions for patients submitted to hip arthroplasty. The investigation was conducted in a university hospital in the South of Brazil, with a sample of 112 records from admitted patients. Data were collected through a checklist in June of 2013, and statistically analyzed. The educational registry was present in 60 (53% records. Regarding the content, the post-surgery care 36 (53%, mobilization 23 (20,5% and bed exit 21 (18,8% were prevalent and were found in a total of 56 (50% records on the Nursing Evolution document. Although nursing registries present aspects related to patient’s education, better results could be obtained with the intervention operationalization, linked to nurse’s permanent education.

Characteristics and analysis of scientific articles submitted to the European Annals of Otorhinolaryngology, Head and Neck Diseases.

Science.gov (United States)

Laccourreye, O; Bonfils, P; Denoyelle, F; Garrel, R; Jankowski, R; Karkas, A; Makeieff, M; Righini, C; Vincent, C; Martin, C

2015-09-01

To evaluate characteristics, suggested modifications and reasons for rejection in scientific articles submitted for publication in the European Annals of Otorhinolaryngology, Head and Neck Diseases. A prospective study analyzed the flaws noted by reviewers in 52 scientific articles submitted to the European Annals of Otorhinolaryngology, Head and Neck Diseases between August 31, 2014 and February 28, 2015. Fifteen flaws concerning content and 7 concerning form were identified. In more than 25% of submissions, major flaws were noted: purely descriptive paper; lack of contribution to existing state of knowledge; failure to define a clear study objective and/or analyze the impact of major variables; poorly structured Materials and methods section, lacking description of study population, objective and/or variables; lack of or inappropriate statistical analysis; Introduction verbose and/or misrepresenting the literature; excessively heterogeneous and/or poorly described study population; imprecise discussion, straying from the point, overstating the significance of results and/or introducing new results not mentioned in the Results section; description of the study population placed in the Results section instead of under Materials and methods; serious mistakes of syntax, spelling and/or tense; and failure to follow the Instructions to Authors. After review, 21.1% of articles were published, 65.3% rejected and 13.4% non-resubmitted within 3 months of review. On univariate analysis, the only variable increasing the percentage of articles accepted was the topic not being devoted to head and neck surgery (P=0.03). These results document the excessive flaw rate still to be found in manuscripts and demonstrate the continuing need for authors to master and implement the rules of scientific medical writing. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Multi-modal remote sensing system (MRSS) for transportation infrastructure inspection and monitoring.

Science.gov (United States)

2013-12-01

In this final report draft, our research results during the project period are highlighted : and summarized. Detailed description of our research activities is documented in our : submitted quarterly reports. The results reported in this Final Report...

Inguinodynia in patients submitted to conventional inguinal hernioplasty.

Science.gov (United States)

Dias, Bruno Garcia; Santos, Marcelo Protásio Dos; Chaves, Ana Barbara DE Jesus; Willis, Mariana; Gomes, Marcio Couto; Andrade, Fernandes Tavares; Melo, Valdinaldo Aragão DE; Santos, Paulo Vicente Dos

2017-01-01

to evaluate the incidence of chronic pain and its impact on the quality of life of patients submitted to inguinal hernioplasty using the Lichtenstein technique. this was a descriptive, cross-sectional study of patients operated under spinal anesthesia from February 2013 to February 2015 and who had already completed six postoperative months. We questioned patients about the presence of chronic inguinal pain and, if confirmed, invited them to a consultation in which we assessed the pain and its impact on quality of life. out of 158 patients submitted to the procedure, we identified 7.6% as having inguinodynia. Of these, there was an impact on the quality of life in 25%. the incidence of inguinodynia after hernioplasty with repercussion in quality of life was similar to the one of found in the world literature. avaliar a incidência de dor crônica e o seu impacto na qualidade de vida de pacientes submetidos à hernioplastia inguinal pela técnica de Lichtenstein. trata-se de estudo transversal descritivo, de pacientes operados de hérnia inguinal pela técnica de Lichtenstein sob anestesia raquidiana, no período de fevereiro de 2013 a fevereiro de 2015, e que já haviam completado seis meses de pós-operatório. Os pacientes foram questionados sobre a presença de dor inguinal crônica e, caso confirmada, convidados a uma consulta na qual foi feita análise da qualidade da dor e seu impacto na qualidade de vida. do total de 158 pacientes submetidos ao procedimento, 7,6% foram identificados como portadores de inguinodinia. Destes, houve impacto na qualidade de vida em 25%. observou-se incidência de inguinodinia pós-hernioplastia com repercussão na qualidade de vida semelhante à literatura mundial.

Detailed description and user`s manual of high burnup fuel analysis code EXBURN-I

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Motoe [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Saitou, Hiroaki

1997-11-01

EXBURN-I has been developed for the analysis of LWR high burnup fuel behavior in normal operation and power transient conditions. In the high burnup region, phenomena occur which are different in quality from those expected for the extension of behaviors in the mid-burnup region. To analyze these phenomena, EXBURN-I has been formed by the incorporation of such new models as pellet thermal conductivity change, burnup-dependent FP gas release rate, and cladding oxide layer growth to the basic structure of low- and mid-burnup fuel analysis code FEMAXI-IV. The present report describes in detail the whole structure of the code, models, and materials properties. Also, it includes a detailed input manual and sample output, etc. (author). 55 refs.

Remembering the past and imagining the future: Selective effects of an episodic specificity induction on detail generation.

Science.gov (United States)

Madore, Kevin P; Schacter, Daniel L

2016-01-01

According to the constructive episodic simulation hypothesis, remembering past experiences and imagining future experiences both rely heavily on episodic memory. However, recent research indicates that nonepisodic processes such as descriptive ability also influence memory and imagination. We recently found that an episodic specificity induction--brief training in recollecting details of past experiences--enhanced detail generation on memory and imagination tasks but not a picture description task and thereby concluded that the induction can dissociate episodic processes involved in remembering the past and imagining the future from those nonepisodic processes involved in description. To evaluate the generality of our previous findings and to examine the role of generative search in producing those findings, we modified our paradigm so that word cues replaced picture cues, and a word comparison task that requires generation of sentences and word definitions replaced picture description. Young adult participants received either a specificity induction or one of two control inductions before completing the memory, imagination, and word comparison tasks. Replicating and extending our previous work, we found that the specificity induction increased detail generation in memory and imagination without having an effect on word comparison. The induction's selective effect on memory and imagination stemmed from an increase in internal (i.e., on-topic and episodic) details and had no effect on external (e.g., off-topic or semantic) details. The results point to the efficacy of the specificity induction for isolating episodic processes involved in remembering the past and imagining the future even when a nonepisodic task requires generative search.

INTRA/Mod3.2. Manual and code description. Volume 2 - User's manual

International Nuclear Information System (INIS)

Andersson, Jenny; Edlund, O.; Hermann, J.; Johansson, Lise-Lotte

1999-01-01

The INTRA Manual consists of two volumes. Volume I of the manual is a thorough description of the code INTRA, the physical modelling of INTRA and the ruling numerics, and volume II, the User's Manual is an input description. This document, the User's Manual, Volume II, contains a detailed description of how to use INTRA, how to set up an input file, how to run INTRA and also post-processing

Operating manual for the High Flux Isotope Reactor. Description of the facility

Energy Technology Data Exchange (ETDEWEB)

None

1965-06-01

This report contains a comprehensive description of the High Flux Isotope Reactor facility. Its primary purpose is to supplement the detailed operating procedures, providing the reactor operators with background information on the various HFIR systems. The detailed operating procedures are presented in another report.

Data on the descriptive overview and the quality assessment details of 12 qualitative research papers.

Science.gov (United States)

Barnabishvili, Maia; Ulrichs, Timo; Waldherr, Ruth

2016-09-01

This data article presents the supplementary material for the review paper "Role of acceptability barriers in delayed diagnosis of Tuberculosis: Literature review from high burden countries" (Barnabishvili et al., in press) [1]. General overview of 12 qualitative papers, including the details about authors, years of publication, data source locations, study objectives, overview of methods, study population characteristics, as well as the details of intervention and the outcome parameters of the papers are summarized in the first two tables included to the article. Quality assessment process of the methodological strength of 12 papers and the results of the critical appraisal are further described and summarized in the second part of the article.

Quality of life in patients submitted to radical prostatectomy

Directory of Open Access Journals (Sweden)

Débora Moura Miranda Goluart

2014-09-01

Full Text Available A cross-sectional study with a descriptive analysis of 81 patients submitted to radical prostatectomy (RP. Our objective was to correlate quality of life (QL according to the EORTC-QLQ C30 with age group and time after surgery. Mean age was 65.7 years. Most sought the care of urology, asymptomatic. Some referred former smoking (49.9% and high blood pressure (53.1%. Mean preoperative SBP was 8.4 ng/ml. Most participants were in stages T2c to T3, Gleason ?6 and over a year after surgery. Erectile dysfunction presented in 90.1%, and urinary incontinence in 33.3%. Functional and overall health scales presented high QL indexes, and symptomatology, with low ones. Older adults presented higher QL regarding emotional functioning, financial difficulties and overall health, as well as those with over a year after surgery, regarding cognitive functioning and fatigue. Although QL was not greatly affected, there were differences between age groups and time after surgery. doi: 10.5216/ree.v16i3.21589.

Anthropometric and clinical profiles of post-bariatric patients submitted to procedures in plastic surgery.

Science.gov (United States)

Rosa, Simone Corrêa; Macedo, Jefferson Lessa Soares DE; Casulari, Luiz Augusto; Canedo, Lucas Ribeiro; Marques, João Vitor Almeida

2018-01-01

to evaluate the profile of patients submitted to post-bariatric plastic surgery at the North Wing Regional Hospital, Brasília, DF. we conducted a prospective, descriptive and analytical study of patients submitted to Roux-en-Y gastroplasty, and subsequently to plastic surgery, from January 2011 to December 2016. We assessed body mass index before gastroplasty and after surgery plastic surgery, postoperative complications and comorbidities. we studied 139 patients (130 women and nine men), with a mean age of 41 years, who underwent 233 operations. The mean BMI at the time of plastic surgery was 27.44kg/m2. The mean weight loss was 47.02kg and the mean maximum BMI was 45.17kg/m2. The mean time between bariatric surgery and plastic surgery was 42 months. The most important co-morbidities before plastic surgery were arterial hypertension (11.5%), arthropathy (5.4%), diabetes mellitus (5%) and metabolic syndrome (4.3%) (pprofile of post-bariatric patients who underwent plastic surgery was similar to that reported in the literature, except for the low rate of associated surgeries and postoperative complications. Plastic surgery in post-bariatric patients has led to an improvement in the quality of life in most of these patients.

12 CFR 516.110 - Who may submit a written comment?

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Who may submit a written comment? 516.110 Section 516.110 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY APPLICATION PROCESSING PROCEDURES Comment Procedures § 516.110 Who may submit a written comment? Any person may submit a...

Token Economy: A Systematic Review of Procedural Descriptions.

Science.gov (United States)

Ivy, Jonathan W; Meindl, James N; Overley, Eric; Robson, Kristen M

2017-09-01

The token economy is a well-established and widely used behavioral intervention. A token economy is comprised of six procedural components: the target response(s), a token that functions as a conditioned reinforcer, backup reinforcers, and three interconnected schedules of reinforcement. Despite decades of applied research, the extent to which the procedures of a token economy are described in complete and replicable detail has not been evaluated. Given the inherent complexity of a token economy, an analysis of the procedural descriptions may benefit future token economy research and practice. Articles published between 2000 and 2015 that included implementation of a token economy within an applied setting were identified and reviewed with a focus on evaluating the thoroughness of procedural descriptions. The results show that token economy components are regularly omitted or described in vague terms. Of the articles included in this analysis, only 19% (18 of 96 articles reviewed) included replicable and complete descriptions of all primary components. Missing or vague component descriptions could negatively affect future research or applied practice. Recommendations are provided to improve component descriptions.

29 CFR 4010.13 - Confidentiality of information submitted.

Science.gov (United States)

2010-07-01

... REPORTING AND DISCLOSURE REQUIREMENTS ANNUAL FINANCIAL AND ACTUARIAL INFORMATION REPORTING § 4010.13 Confidentiality of information submitted. In accordance with § 4901.21(a)(3) of this chapter and ERISA section... 29 Labor 9 2010-07-01 2010-07-01 false Confidentiality of information submitted. 4010.13 Section...

Comparing Epileptiform Behavior of Mesoscale Detailed Models and Population Models of Neocortex

NARCIS (Netherlands)

Visser, S.; Meijer, Hil Gaétan Ellart; Lee, Hyong C.; van Drongelen, Wim; van Putten, Michel Johannes Antonius Maria; van Gils, Stephanus A.

2010-01-01

Two models of the neocortex are developed to study normal and pathologic neuronal activity. One model contains a detailed description of a neocortical microcolumn represented by 656 neurons, including superficial and deep pyramidal cells, four types of inhibitory neurons, and realistic synaptic

Sensory evaluation of black beans submitted to gamma radiation from Cobalt-60

International Nuclear Information System (INIS)

Moura, Neila Camargo de; Canniatti-Brazaca, Solange Guidolin; Spoto, Marta Helena Fillet; Arthur, Valter

2005-01-01

The objective of this research was to evaluate the sensory aspects of black beans submitted to gamma radiation from 60 Co. The study involved eight panelists, between 17 to 23 years old, who were selected and trained for the descriptive analysis of appearance, aroma, flavor and texture. The panelists analyzed alterations of appearance, aroma, flavor and texture of non-irradiated and irradiated black beans with doses 2, 4, 6, 8 and 10kGy. The results were analyzed by test F, ANOVA and the Tukey test (5%), with the use of computers and the sensory analysis software Compusense Five and SAS. The results showed that irradiated samples decreased the bitter flavor, accentuated color and brightness and samples non-irradiated dry texture. The radiation treatment is a good method for conservation of black beans in doses evaluated in this study.(author)

Author Details

African Journals Online (AJOL)

dermatophytosis) in dogs and cats submitted to the small animal clinic of the University of Nairobi between 2001 and 2010. Abstract. ISSN: 0256-5161. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's ...

INTRA/Mod3.2. Manual and code description. Volume 2 - User`s manual

Energy Technology Data Exchange (ETDEWEB)

Andersson, Jenny; Edlund, O.; Hermann, J.; Johansson, Lise-Lotte

1999-01-01

The INTRA Manual consists of two volumes. Volume I of the manual is a thorough description of the code INTRA, the physical modelling of INTRA and the ruling numerics, and volume II, the User`s Manual is an input description. This document, the User`s Manual, Volume II, contains a detailed description of how to use INTRA, how to set up an input file, how to run INTRA and also post-processing

Validation of an educative manual for patients with head and neck cancer submitted to radiation therapy

Directory of Open Access Journals (Sweden)

Flávia Oliveira de Almeida Marques da Cruz

2016-01-01

Full Text Available Abstract Objective: develop the content and face validation of an educative manual for patients with head and neck cancer submitted to radiation therapy. Method: descriptive methodological research. The Theory of Psychometrics was used for the validation process, developed by 15 experts in the theme area of the educative manual and by two language and publicity professionals. A minimum agreement level of 80% was considered to guarantee the validity of the material. Results: the items addressed in the assessment tool of the educative manual were divided in three blocks: objectives, structure and format, and relevance. Only one item, related to the sociocultural level of the target public, obtained an agreement rate <80%, and was reformulated based on the participants' suggestions. All other items were considered appropriate and/or complete appropriate in the three blocks proposed: objectives - 92.38%, structure and form - 89.74%, and relevance - 94.44%. Conclusion: the face and content validation of the educative manual proposed were attended to. This can contribute to the understanding of the therapeutic process the head and neck cancer patient is submitted to during the radiation therapy, besides supporting clinical practice through the nursing consultation.

30 CFR 285.607 - How do I submit my SAP?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I submit my SAP? 285.607 Section 285.607... Assessment Plan and Information Requirements for Commercial Leases § 285.607 How do I submit my SAP? You must submit one paper copy and one electronic version of your SAP to MMS at the address listed in § 285.110(a). ...

A Checklist for Submitting Your Risk Management Plan (RMP)

Science.gov (United States)

Important information about 2014 submissions and a checklist to consider in preparing and resubmitting a 5-year update, as required by 40 CFR part 68. Use the RMP*eSubmit software application, which replaced RMP*Submit.

Descriptive studies of Purepecha: Introductory study

Directory of Open Access Journals (Sweden)

Violeta Vázquez Rojas Maldonado

2013-12-01

Full Text Available Seven papers in this volume are the result of a collective project of linguistic description. This introduction offers a general background for such enterprise. It provides information about some sociolinguistic and grammatical aspects of the Purepecha language, a list of some recent studies on the language, it describes the orthographic conventions employed. We also provide details about the elicitation methodology and the demographic information of the language consultants.

76 FR 52323 - Combined Notice of Filings; Filings Instituting Proceedings

Science.gov (United States)

2011-08-22

.... Applicants: Young Gas Storage Company, Ltd. Description: Young Gas Storage Company, Ltd. submits tariff..., but intervention is necessary to become a party to the proceeding. The filings are accessible in the.... More detailed information relating to filing requirements, interventions, protests, and service can be...

The interaction of grammatical aspect and temporal distance in motion descriptions

Directory of Open Access Journals (Sweden)

Sarah eAnderson

2013-07-01

Full Text Available Grammatical aspect is known to shape event understanding. However, little is known about how it interacts with other important temporal information, such as recent and distant past. The current work uses computer-mouse tracking (Spivey, Grosjean, & Knoblich, 2005 to explore the interaction of aspect and temporal context. Participants in our experiment listened to past motion event descriptions that varied according to aspect (simple past, past progressive and temporal distance (recent past, distant past while viewing scenes with paths and implied destinations. Participants used a computer mouse to place characters into the scene to match event descriptions. Our results indicated that aspect and temporal context interact in interesting ways. When aspect placed emphasis on the ongoing details of the event and the temporal context was recent (thus, making fine details available in memory, this match between conditions elicited smoother and faster computer mouse movements than when conditions mismatched. Likewise, when aspect placed emphasis on the less-detailed end state of the event and temporal context was in the distant past (thus making fine details less available, this match between conditions also elicited smoother and faster computer mouse movements.

42 CFR 405.809 - Opportunity to submit evidence.

Science.gov (United States)

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Opportunity to submit evidence. 405.809 Section 405.809 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES MEDICARE PROGRAM FEDERAL HEALTH INSURANCE FOR THE AGED AND DISABLED Appeals Under the Medicare Part B Program § 405.809 Opportunity to submit...

Detailed evaluation of ET-RR-2 neutronic design: approach to criticality

International Nuclear Information System (INIS)

Ashoub, N.; Amin, E.

2000-01-01

The ET-RR-2 safety analysis evaluation effort included the assessment of the reactor core nuclear design parameters. The present work complements the previous effort of neutronic calculations using NCNSRC computer code packages. This paper is the first in comprehensive neutronic calculation assessment up to the equilibrium core. It deals with evaluation of neutronic calculation submitted during the early phase of the licensing process; namely the proposal to assemble the first critical core, calculation of power peaking factor and determination of detailed energy group flux distribution in the core particularly in the cobalt irradiation position. The neutronic design criteria are examined qualitatively and quantitatively in the present paper

Operating manual for the High Flux Isotope Reactor. Volume I. Description of the facility

Energy Technology Data Exchange (ETDEWEB)

1982-09-01

This volume contains a comprehensive description of the High Flux Isotope Reactor Facility. Its primary purpose is to supplement the detailed operating procedures, providing the reactor operators with background information on the various HFIR systems. The detailed operating procdures are presented in another report.

Operating manual for the High Flux Isotope Reactor. Volume I. Description of the facility

International Nuclear Information System (INIS)

1982-09-01

This volume contains a comprehensive description of the High Flux Isotope Reactor Facility. Its primary purpose is to supplement the detailed operating procedures, providing the reactor operators with background information on the various HFIR systems. The detailed operating procdures are presented in another report

Quality of Impressions and Work Authorizations Submitted by Dental Students Supervised by Prosthodontists and General Dentists.

Science.gov (United States)

Imbery, Terence A; Diaz, Nicholas; Greenfield, Kristy; Janus, Charles; Best, Al M

2016-10-01

Preclinical fixed prosthodontics is taught by Department of Prosthodontics faculty members at Virginia Commonwealth University School of Dentistry; however, 86% of all clinical cases in academic year 2012 were staffed by faculty members from the Department of General Practice. The aims of this retrospective study were to quantify the quality of impressions, accuracy of laboratory work authorizations, and most common errors and to determine if there were differences between the rate of errors in cases supervised by the prosthodontists and the general dentists. A total of 346 Fixed Prosthodontic Laboratory Tracking Sheets for the 2012 academic year were reviewed. The results showed that, overall, 73% of submitted impressions were acceptable at initial evaluation, 16% had to be poured first and re-evaluated for quality prior to pindexing, 7% had multiple impressions submitted for transfer dies, and 4% were rejected for poor quality. There were higher acceptance rates for impressions and work authorizations for cases staffed by prosthodontists than by general dentists, but the differences were not statistically significant (p=0.0584 and p=0.0666, respectively). Regarding the work authorizations, 43% overall did not provide sufficient information or had technical errors that delayed prosthesis fabrication. The most common errors were incorrect mountings, absence of solid casts, inadequate description of margins for porcelain fused to metal crowns, inaccurate die trimming, and margin marking. The percentages of errors in cases supervised by general dentists and prosthodontists were similar for 17 of the 18 types of errors identified; only for margin description was the percentage of errors statistically significantly higher for general dentist-supervised than prosthodontist-supervised cases. These results highlighted the ongoing need for faculty development and calibration to ensure students receive the highest quality education from all faculty members teaching fixed

Patient-specific estimation of detailed cochlear shape from clinical CT images

DEFF Research Database (Denmark)

Kjer, H Martin; Fagertun, Jens; Wimmer, Wilhelm

2018-01-01

of the detailed patient-specific cochlear shape from CT images. From a collection of temporal bone [Formula: see text]CT images, we build a cochlear statistical deformation model (SDM), which is a description of how a human cochlea deforms to represent the observed anatomical variability. The model is used...... for regularization of a non-rigid image registration procedure between a patient CT scan and a [Formula: see text]CT image, allowing us to estimate the detailed patient-specific cochlear shape. We test the accuracy and precision of the predicted cochlear shape using both [Formula: see text]CT and CT images...

SCOWLP: a web-based database for detailed characterization and visualization of protein interfaces

Directory of Open Access Journals (Sweden)

Schroeder Michael

2006-03-01

Full Text Available Abstract Background Currently there is a strong need for methods that help to obtain an accurate description of protein interfaces in order to be able to understand the principles that govern molecular recognition and protein function. Many of the recent efforts to computationally identify and characterize protein networks extract protein interaction information at atomic resolution from the PDB. However, they pay none or little attention to small protein ligands and solvent. They are key components and mediators of protein interactions and fundamental for a complete description of protein interfaces. Interactome profiling requires the development of computational tools to extract and analyze protein-protein, protein-ligand and detailed solvent interaction information from the PDB in an automatic and comparative fashion. Adding this information to the existing one on protein-protein interactions will allow us to better understand protein interaction networks and protein function. Description SCOWLP (Structural Characterization Of Water, Ligands and Proteins is a user-friendly and publicly accessible web-based relational database for detailed characterization and visualization of the PDB protein interfaces. The SCOWLP database includes proteins, peptidic-ligands and interface water molecules as descriptors of protein interfaces. It contains currently 74,907 protein interfaces and 2,093,976 residue-residue interactions formed by 60,664 structural units (protein domains and peptidic-ligands and their interacting solvent. The SCOWLP web-server allows detailed structural analysis and comparisons of protein interfaces at atomic level by text query of PDB codes and/or by navigating a SCOP-based tree. It includes a visualization tool to interactively display the interfaces and label interacting residues and interface solvent by atomic physicochemical properties. SCOWLP is automatically updated with every SCOP release. Conclusion SCOWLP enriches

Aerobic growth of Anoxybacillus pushchinoensis K1(T): emended descriptions of A. pushchinoensis and the genus Anoxybacillus

Science.gov (United States)

Pikuta, Elena; Cleland, David; Tang, Jane

2003-01-01

In this work, corrections are made to the descriptions of the species Anoxybacillus pushchinoensis corrig. and the genus ANOXYBACILLUS: Experiments to determine the relationship of A. pushchinoensis K1(T) to oxygen showed that it was capable of aerobic growth, but preferred to grow anaerobically. During aerobic growth, the redox indicator resazurin was reduced as a result of hydrogen gas production. The facultatively anaerobic nature of K1(T) was ascertained by cultivation in aerobic liquid medium, where growth began at the bottom of the tube. The anaerobic nature of K1(T) was also indicated by a negative catalase reaction. This work is submitted to correct the description of the species A. pushchinoensis from obligate anaerobe to aerotolerant anaerobe and to emend the description of the genus Anoxybacillus from obligate anaerobes or facultative anaerobes to aerotolerant anaerobes or facultative anaerobes.

Detailed Design Documentation, without the Pain

Science.gov (United States)

Ramsay, C. D.; Parkes, S.

2004-06-01

Producing detailed forms of design documentation, such as pseudocode and structured flowcharts, to describe the procedures of a software system:(1) allows software developers to model and discuss their understanding of a problem and the design of a solution free from the syntax of a programming language,(2) facilitates deeper involvement of non-technical stakeholders, such as the customer or project managers, whose influence ensures the quality, correctness and timeliness of the resulting system,(3) forms comprehensive documentation of the system for its future maintenance, reuse and/or redeployment.However, such forms of documentation require effort to create and maintain.This paper describes a software tool which is currently being developed within the Space Systems Research Group at the University of Dundee which aims to improve the utility of, and the incentive for, creating detailed design documentation for the procedures of a software system. The rationale for creating such a tool is briefly discussed, followed by a description of the tool itself, a summary of its perceived benefits, and plans for future work.

The Athena data dictionary and description language

International Nuclear Information System (INIS)

Bazan, Alain; Bouedo, Thierry; Ghez, Philippe; Marino, Massimo; Tull, Craig

2003-01-01

Athena is the ATLAS off-line software framework, based upon the GAUDI architecture from LHCb. As part of ATLAS' continuing efforts to enhance and customize the architecture to meet our needs, we have developed a data object description tool suite and service for Athena. The aim is to provide a set of tools to describe, manage, integrate and use the Event Data Model at a design level according to the concepts of the Athena framework (use of patterns, relationships,...). Moreover, to ensure stability and reusability this must be fully independent from the implementation details. After an extensive investigation into the many options, we have developed a language grammar based upon a description language (IDL, ODL) to provide support for object integration in Athena. We have then developed a compiler front end based upon this language grammar, JavaCC, and a Java Reflection API-like interface. We have then used these tools to develop several compiler back ends which meet specific needs in ATLAS such as automatic generation of object converters, and data object scripting interfaces. We present here details of our work and experience to date on the Athena Definition Language and Athena Data Dictionary. (authors)

A detailed cost analysis of in vitro fertilization and intracytoplasmic sperm injection treatment.

NARCIS (Netherlands)

Bouwmans, C.A.; Lintsen, A.M.E.; Eijkemans, M.J.; Habbema, J.D.F.; Braat, D.D.M.; Hakkaart, L.

2008-01-01

OBJECTIVE: To provide detailed information about costs of in vitro fertilization (IVF) and intracytoplasmic sperm injection (ICSI) treatment stages and to estimate the cost per IVF and ICSI treatment cycle and ongoing pregnancy. DESIGN: Descriptive micro-costing study. SETTING: Four Dutch IVF

Discourse Factors Influencing Spatial Descriptions in English and German

Science.gov (United States)

Vorwerg, Constanze; Tenbrink, Thora

The ways in which objects are referred to by using spatial language depend on many factors, including the spatial configuration and the discourse context. We present the results of a web experiment in which speakers were asked to either describe where a specified item was located in a picture containing several items, or which item was specified. Furthermore, conditions differed as to whether the first six configurations were specifically simple or specifically complex. Results show that speakers' spatial descriptions are more detailed if the question is where rather than which, mirroring the fact that contrasting the target item from the others in which tasks may not always require an equally detailed spatial description as in where tasks. Furthermore, speakers are influenced by the complexity of initial configurations in intricate ways: on the one hand, individual speakers tend to self-align with respect to their earlier linguistic strategies; however, also a contrast effect could be identified with respect to the usage of combined projective terms.

30 CFR 218.580 - When do I submit Form MMS-4444?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false When do I submit Form MMS-4444? 218.580 Section 218.580 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR MINERALS REVENUE... Correspondence § 218.580 When do I submit Form MMS-4444? Initially, you must submit MMS Form-4444 by November 29...

45 CFR 149.320 - Universe of claims that must be submitted.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Universe of claims that must be submitted. 149.320 Section 149.320 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH... Universe of claims that must be submitted. (a) Claims submitted for an early retiree, as defined in § 149.2...

Using ecological zones to increase the detail of Landsat classifications

Science.gov (United States)

Fox, L., III; Mayer, K. E.

1981-01-01

Changes in classification detail of forest species descriptions were made for Landsat data on 2.2 million acres in northwestern California. Because basic forest canopy structures may exhibit very similar E-M energy reflectance patterns in different environmental regions, classification labels based on Landsat spectral signatures alone become very generalized when mapping large heterogeneous ecological regions. By adding a seven ecological zone stratification, a 167% improvement in classification detail was made over the results achieved without it. The seven zone stratification is a less costly alternative to the inclusion of complex collateral information, such as terrain data and soil type, into the Landsat data base when making inventories of areas greater than 500,000 acres.

Development of the Verona coding definitions of emotional sequences to code health providers' responses (VR-CoDES-P) to patient cues and concerns

NARCIS (Netherlands)

del Piccolo, Lidia; de Haes, Hanneke; Heaven, Cathy; Jansen, Jesse; Verheul, William; Bensing, Jozien; Bergvik, Svein; Deveugele, Myriam; Eide, Hilde; Fletcher, Ian; Goss, Claudia; Humphris, Gerry; Kim, Young-Mi; Langewitz, Wolf; Mazzi, Maria Angela; Mjaaland, Trond; Moretti, Francesca; Nübling, Matthias; Rimondini, Michela; Salmon, Peter; Sibbern, Tonje; Skre, Ingunn; van Dulmen, Sandra; Wissow, Larry; Young, Bridget; Zandbelt, Linda; Zimmermann, Christa; Finset, Arnstein

2011-01-01

Objective: To present a method to classify health provider responses to patient cues and concerns according to the VR-CoDES-CC (Del Piccolo et al. (2009) [2] and Zimmermann et al. (submitted for publication) [3]). The system permits sequence analysis and a detailed description of how providers

Development of the Verona coding definitions of emotional sequences to code health providers' responses (VR-CoDES-P) to patient cues and concerns.

NARCIS (Netherlands)

Piccolo, L. del; Haes, H. de; Heaven, C.; Jansen, J.; Verheul, W.; Bensing, J.; Bergvik, S.; Deveugele, M.; Eide, H.; Fletcher, I.; Goss, C.; Humphris, G.; Young-Mi, K.; Langewitz, W.; Mazzi, M.A.; Mjaaland, T.; Moretti, F.; Nübling, M.; Rimondini, M.; Salmon, P.; Sibbern, T.; Skre, I.; Dulmen, S. van; Wissow, L.; Young, B.; Zandbelt, L.; Zimmermann, C.; Finset, A.

2011-01-01

Objective: To present a method to classify health provider responses to patient cues and concerns according to the VR-CoDES-CC (Del Piccolo et al. (2009) [2] and Zimmermann et al. (submitted for publication) [3]). The system permits sequence analysis and a detailed description of how providers

Optical theorem and its history

International Nuclear Information System (INIS)

Newton, R.G.

1978-01-01

A translation is presented of a paper submitted to the symposium ''Concepts and methods in microscopic physics'' held at Washington University in 1974. A detailed description is given of the history of the optical theorem, its various formulations and derivations and its use in the scattering theory. (Z.J.)

E-detailing: information technology applied to pharmaceutical detailing.

Science.gov (United States)

Montoya, Isaac D

2008-11-01

E-detailing can be best described as the use of information technology in the field of pharmaceutical detailing. It is becoming highly popular among pharmaceutical companies because it maximizes the time of the sales force, cuts down the cost of detailing and increases physician prescribing. Thus, the application of information technology is proving to be beneficial to both physicians and pharmaceutical companies. When e-detailing was introduced in 1996, it was limited to the US; however, numerous other countries soon adopted this novel approach to detailing and now it is popular in many developed nations. The objective of this paper is to demonstrate the rapid growth of e-detailing in the field of pharmaceutical marketing. A review of e-detailing literature was conducted in addition to personal conversations with physicians. E-detailing has the potential to reduce marketing costs, increase accessibility to physicians and offer many of the advantages of face-to-face detailing. E-detailing is gaining acceptance among physicians because they can access the information of a pharmaceutical product at their own time and convenience. However, the drug safety aspect of e-detailing has not been examined and e-detailing remains a supplement to traditional detailing and is not yet a replacement to it.

33 CFR 160.210 - Methods for submitting an NOA.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Methods for submitting an NOA... Conditions, and Certain Dangerous Cargos § 160.210 Methods for submitting an NOA. (a) Submission to the... the NVMC web site at http://www.nvmc.uscg.gov; (ii) Electronic submission of Extensible Markup...

17 CFR 229.102 - (Item 102) Description of property.

Science.gov (United States)

2010-04-01

... segment(s), as reported in the financial statements, that use the properties described. If any such... by the registrant. Detailed descriptions of the physical characteristics of individual properties or... qualitative factors. See Instruction 1 to Item 101 of Regulation S-K (§ 229.101). 3. In the case of an...

Quadrant I description of current conditions

International Nuclear Information System (INIS)

1990-09-01

In accordance with the requirements of the Consent Decree issued by the Ohio Attorney General's office on August 29, 1989 and with the RCRA Section 3008(h) Consent Order issued by the US Environmental Protection Agency, Region V (USEPA) on September 29, 1989, this report, which provides a Description of Current Conditions within Quadrant I of the Portsmouth Gaseous Diffusion Plant (PORTS) located in Piketon, Ohio, has been developed and submitted for approval. The objectives of this report are to provide data concerning: (1) the current state of knowledge of the environmental setting of Quadrant I of PORTS including ground water, surface water, soil and air; and (2) the extent of known, potential and suspected contamination of these segments of the environment in Quadrant I of the facility. This report is the initial step in the comprehensive RCRA Facility Investigation (RFI) currently underway at PORTS, and will provide a foundation for all subsequent activities related to the RFI in Quadrant I

30 CFR 218.560 - How do I submit Form MMS-4444?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I submit Form MMS-4444? 218.560 Section... Correspondence § 218.560 How do I submit Form MMS-4444? A copy of Form MMS-4444 and instructions may be obtained from MMS. It will also be posted on the MMS Web site. Submit the completed, signed form to the address...

30 CFR 210.101 - Who must submit production reports?

Science.gov (United States)

2010-07-01

... MANAGEMENT FORMS AND REPORTS Production Reports-Oil and Gas § 210.101 Who must submit production reports? (a... operator number. To obtain an operator number, refer to the MMS Minerals Production Reporter Handbook for... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Who must submit production reports? 210.101...

Federal Funds for Research and Development: Fiscal Years 1980, 1981, and 1982. Volume XXX. Detailed Statistical Tables. Surveys of Science Resources Series.

Science.gov (United States)

National Science Foundation, Washington, DC.

During the March through July 1981 period a total of 36 Federal agencies and their subdivisions (95 individual respondents) submitted data in response to the Annual Survey of Federal Funds for Research and Development, Volume XXX, conducted by the National Science Foundation. The detailed statistical tables presented in this report were derived…

Advanced Transport Operating System (ATOPS) control display unit software description

Science.gov (United States)

Slominski, Christopher J.; Parks, Mark A.; Debure, Kelly R.; Heaphy, William J.

1992-01-01

The software created for the Control Display Units (CDUs), used for the Advanced Transport Operating Systems (ATOPS) project, on the Transport Systems Research Vehicle (TSRV) is described. Module descriptions are presented in a standardized format which contains module purpose, calling sequence, a detailed description, and global references. The global reference section includes subroutines, functions, and common variables referenced by a particular module. The CDUs, one for the pilot and one for the copilot, are used for flight management purposes. Operations performed with the CDU affects the aircraft's guidance, navigation, and display software.

Pairwise Trajectory Management (PTM): Concept Description and Documentation

Science.gov (United States)

Jones, Kenneth M.; Graff, Thomas J.; Carreno, Victor; Chartrand, Ryan C.; Kibler, Jennifer L.

2018-01-01

Pairwise Trajectory Management (PTM) is an Interval Management (IM) concept that utilizes airborne and ground-based capabilities to enable the implementation of airborne pairwise spacing capabilities in oceanic regions. The goal of PTM is to use airborne surveillance and tools to manage an "at or greater than" inter-aircraft spacing. Due to the accuracy of Automatic Dependent Surveillance-Broadcast (ADS-B) information and the use of airborne spacing guidance, the minimum PTM spacing distance will be less than distances a controller can support with current automation systems that support oceanic operations. Ground tools assist the controller in evaluating the traffic picture and determining appropriate PTM clearances to be issued. Avionics systems provide guidance information that allows the flight crew to conform to the PTM clearance issued by the controller. The combination of a reduced minimum distance and airborne spacing management will increase the capacity and efficiency of aircraft operations at a given altitude or volume of airspace. This document provides an overview of the proposed application, a description of several key scenarios, a high level discussion of expected air and ground equipment and procedure changes, a description of a NASA human-machine interface (HMI) prototype for the flight crew that would support PTM operations, and initial benefits analysis results. Additionally, included as appendices, are the following documents: the PTM Operational Services and Environment Definition (OSED) document and a companion "Future Considerations for the Pairwise Trajectory Management (PTM) Concept: Potential Future Updates for the PTM OSED" paper, a detailed description of the PTM algorithm and PTM Limit Mach rules, initial PTM safety requirements and safety assessment documents, a detailed description of the design, development, and initial evaluations of the proposed flight crew HMI, an overview of the methodology and results of PTM pilot training

Are medical articles highlighting detailed statistics more cited?

Directory of Open Access Journals (Sweden)

Mike Thelwall

2015-06-01

Full Text Available When conducting a literature review, it is natural to search for articles and read their abstracts in order to select papers to read fully. Hence, informative abstracts are important to ensure that research is read. The description of a paper's methods may help to give confidence that a study is of high quality. This article assesses whether medical articles that mention three statistical methods, each of which is arguably indicative of a more detailed statistical analysis than average, are more highly cited. The results show that medical articles mentioning Bonferroni corrections, bootstrapping and effect size tend to be 7%, 8% and 15% more highly ranked for citations than average, respectively. Although this is consistent with the hypothesis that mentioning more detailed statistical techniques generate more highly cited research, these techniques may also tend to be used in more highly cited areas of Medicine.

40 CFR 60.2900 - When must I submit my waste management plan?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... Waste Management Plan § 60.2900 When must I submit my waste management plan? You must submit a waste management plan prior to commencing construction, reconstruction, or modification. ...

Sonographic and Anatomic Description of the Subtalar Joint

DEFF Research Database (Denmark)

Mandl, Peter; Bong, David; Balint, Peter V

2018-01-01

Our study provides a detailed anatomic and sonographic description of the subtalar joint, a single joint that, anatomically, is divided into the anterior subtalar joint (ASTJ) and the posterior subtalar joint (PSTJ). Cadaver specimens of the ankle and foot were examined in detail by ultrasound (US......), and the subtalar joints of all the specimens were injected with colored latex of a contrasting color under US guidance. Compatible with other studies, examination of the sections revealed lack of communication between the ASTJ and the PSTJ and communication between the PSTJ and the posterior recess...... of agreement between images acquired in cadaver specimens and images acquired in four centers using healthy patients....

Hydrogeological Site Descriptive Model - a strategy for its development during Site Investigations

Energy Technology Data Exchange (ETDEWEB)

Rhen, Ingvar [SWECO VIAK AB, Goeteborg (Sweden); Follin, Sven [SF GeoLogic AB, Stockholm (Sweden); Hermanson, Jan [Golder Associates, Stockholm (Sweden)

2003-04-01

The report is to present a strategy for the development of the Site Descriptive Hydrogeological Model within the SKB Site Investigation Programme. The report, and similar reports from the Geology, Rock Mechanics, Thermal properties, Hydrogeochemistry, Transport Properties and Surface Ecosystem disciplines are intended to guide SKB Site Descriptive Modelling but also to provide the authorities with an overview of how the modelling should be performed. Thus the objectives of this report are to: provide guidelines for the modelling of different sites resulting in consistent handling of modelling issues during the Site Investigations, provide a structure for the modelling sequence that is suitable for the establishment of a Site Descriptive model and provide some necessary details that should be considered in a Site Descriptive model.

Hydrogeological Site Descriptive Model - a strategy for its development during Site Investigations

International Nuclear Information System (INIS)

Rhen, Ingvar; Follin, Sven; Hermanson, Jan

2003-04-01

The report is to present a strategy for the development of the Site Descriptive Hydrogeological Model within the SKB Site Investigation Programme. The report, and similar reports from the Geology, Rock Mechanics, Thermal properties, Hydrogeochemistry, Transport Properties and Surface Ecosystem disciplines are intended to guide SKB Site Descriptive Modelling but also to provide the authorities with an overview of how the modelling should be performed. Thus the objectives of this report are to: provide guidelines for the modelling of different sites resulting in consistent handling of modelling issues during the Site Investigations, provide a structure for the modelling sequence that is suitable for the establishment of a Site Descriptive model and provide some necessary details that should be considered in a Site Descriptive model

Integrating textual and model-based process descriptions for comprehensive process search

NARCIS (Netherlands)

Leopold, Henrik; van der Aa, Han; Pittke, Fabian; Raffel, Manuel; Mendling, Jan; Reijers, Hajo A.

2016-01-01

Documenting business processes using process models is common practice in many organizations. However, not all process information is best captured in process models. Hence, many organizations complement these models with textual descriptions that specify additional details. The problem with this

40 CFR 62.14715 - When must I submit my waste management plan?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 8 2010-07-01 2010-07-01 false When must I submit my waste management... submit my waste management plan? You must submit the waste management plan no later than April 5, 2004. ... POLLUTANTS Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That...

Computer software design description for the integrated control and data acquisition system LDUA system

International Nuclear Information System (INIS)

Aftanas, B.L.

1998-01-01

This Computer Software Design Description (CSDD) document provides the overview of the software design for all the software that is part of the integrated control and data acquisition system of the Light Duty Utility Arm System (LDUA). It describes the major software components and how they interface. It also references the documents that contain the detailed design description of the components

Detailed High Frequency Models of Various Winding Types in Power Transformers

DEFF Research Database (Denmark)

Pedersen, Kenneth; Lunow, Morten Erlandsson; Holbøll, Joachim

2005-01-01

Abstract--In this paper, techniques are described which demonstrate how a highly detailed internal transformer model can be obtained systematically with Matlab and how it can be prepared for subsequent transient analysis. The input of such a model will mainly be the description of the cross secti...... equivalent circuit. Finally a new circuit extraction technique is proposed for vector fitted impedance matrices for more efficient computation....

Primary Numbers Database for ATLAS Detector Description Parameters

CERN Document Server

Vaniachine, A; Malon, D; Nevski, P; Wenaus, T

2003-01-01

We present the design and the status of the database for detector description parameters in ATLAS experiment. The ATLAS Primary Numbers are the parameters defining the detector geometry and digitization in simulations, as well as certain reconstruction parameters. Since the detailed ATLAS detector description needs more than 10,000 such parameters, a preferred solution is to have a single verified source for all these data. The database stores the data dictionary for each parameter collection object, providing schema evolution support for object-based retrieval of parameters. The same Primary Numbers are served to many different clients accessing the database: the ATLAS software framework Athena, the Geant3 heritage framework Atlsim, the Geant4 developers framework FADS/Goofy, the generator of XML output for detector description, and several end-user clients for interactive data navigation, including web-based browsers and ROOT. The choice of the MySQL database product for the implementation provides addition...

40 CFR 60.2060 - When must I submit my waste management plan?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... Management Plan § 60.2060 When must I submit my waste management plan? You must submit a waste management... Commercial and Industrial Solid Waste Incineration Units for Which Construction Is Commenced After November...

45 CFR 2523.110 - Can Federal agencies submit multiple applications?

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Can Federal agencies submit multiple applications? 2523.110 Section 2523.110 Public Welfare Regulations Relating to Public Welfare (Continued) CORPORATION... AMERICORPS PROGRAM ASSISTANCE § 2523.110 Can Federal agencies submit multiple applications? No. The...

40 CFR 60.3011 - When must I submit my waste management plan?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... Model Rule-Waste Management Plan § 60.3011 When must I submit my waste management plan? You must submit a waste management plan no later than 60 days following the initial performance test as specified in...

40 CFR 62.14585 - When must I submit my waste management plan?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 8 2010-07-01 2010-07-01 false When must I submit my waste management... Commenced Construction On or Before November 30, 1999 Waste Management Plan § 62.14585 When must I submit my waste management plan? You must submit a waste management plan no later than April 5, 2004. ...

40 CFR 60.2625 - When must I submit my waste management plan?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... or Before November 30, 1999 Model Rule-Waste Management Plan § 60.2625 When must I submit my waste management plan? You must submit a waste management plan no later than the date specified in table 1 of this...

21 CFR 803.13 - Do I need to submit reports in English?

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Do I need to submit reports in English? 803.13... in English? (a) Yes. You must submit all written or electronic equivalent reports required by this part in English. (b) If you submit any reports required by this part in an electronic medium, that...

Relativistic continuum physics for the description of heavy ion collisions

International Nuclear Information System (INIS)

Lukacs, Bela

1986-01-01

The application of relativistic continuum physics to the description of the nuclear fireball evolution from the start of expansion to the breaking is discussed. The basic formalism and basic assumptions of relativistic hydrodynamics and thermodynamics are analyzed in detail. The four basic assumptions are not valid in the case of nuclear fireball produced in heavy ion collisions, but thermodynamics can be extended in different ways to incorporate anisotropy, fluctuations, gradients and the lack of the local equilibrium. The extended continuum formalism is applicable to the description of the nuclear fireball dynamics, including the nuclear - quark matter phase transition. (D.Gy.)

Comparing the subjective task difficulty of human operators with task description levels

International Nuclear Information System (INIS)

Park, Jin Kyun; Jung, Won Dea; Yang, Joon Eon

2011-01-01

Without the loss of generality, it is reasonable to say that an operating procedure consists of many steps including detailed descriptions that provide necessary information in conducting the required tasks safely and effectively. In this regard, since it is widely perceived that procedures are effective for reducing the occurrence of human performance related problems, the use of procedures is very popular in large process control systems including nuclear power plants (NPPs), commercial airplanes and railway systems. However, the secure of an operational safety by using an operating procedure can be accomplished only if human operators are able to effectively obtain necessary information from it. In other words, it is hard to expect the reduction of human performance related problems, if task descriptions are so ambiguous or incomplete that human operators feel an undue difficulty in identifying 'what have to be done' and 'how to do it' from procedures. Unfortunately, it seems that a systematic method that can be used to distinguish the proper level of task descriptions is rare. For this reason, Park et al. developed a decision chart that could be helpful for characterizing the level of task descriptions. In this study, in order to ensure the appropriateness of the suggested decision chart, more detailed investigations were conducted with the support of human operators who are working as the operating personnel of NPPs

40 CFR 167.90 - Where to obtain and submit forms.

Science.gov (United States)

2010-07-01

... establishments not found at the same location as their company headquarters, must submit applications and reports... establishments not found at the same location as their company headquarters to be submitted by the company headquarters to the Regional Office having jurisdiction over the State in which the company headquarters is...

30 CFR 253.40 - What OSFR evidence must I submit to MMS?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What OSFR evidence must I submit to MMS? 253.40... § 253.40 What OSFR evidence must I submit to MMS? (a) You must submit to MMS: (1) A single demonstration... unaltered Form MMS-1016; (3) MMS forms that identify your COFs (Form MMS-1021, Form MMS-1022), and the...

39 CFR 912.7 - Evidence and information to be submitted.

Science.gov (United States)

2010-07-01

... bearing on either the responsibility of the United States for the death or the damages claimed. (b... and information to be submitted. (a) Death. In support of a claim based on death, the claimant may be required to submit the following evidence or information: (1) An authenticated death certificate or other...

31 CFR 375.12 - How do I submit an offer?

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false How do I submit an offer? 375.12 Section 375.12 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL... way for any unauthorized tender submissions or for any delays, errors, or omissions in submitting...

Cold Vacuum Drying (CVD) Electrical System Design Description

International Nuclear Information System (INIS)

SINGH, G.

2000-01-01

This system design description (SDD) provides a technical explanation of the design and operation of the electrical system for the Cold Vacuum Drying Facility (CVDF). This SDD also identifies the requirements, and the basis for the requirements and details on how the requirements have been implemented in the design and construction of the facility. This SDD also provides general guidance for the surveillance, testing, and maintenance of this system

Exploring Environmental Effects of Accidents During Marine Transport of Dangerous Goods by Use of Accident Descriptions

DEFF Research Database (Denmark)

Rømer, Hans Gottberg; Haastrup, P.; Petersen, H J Styhr

1996-01-01

On the basis of 1776 descriptions of water transport accidents involving dangerous goods, environmental problems in connection with releases of this kind are described and discussed. It was found that most detailed descriptions of environmental consequences concerned oil accidents, although most...... longer than broad. Gravity scales used to describe and evaluate environmental consequences were discussed....

10 CFR 14.23 - Evidence and information to be submitted.

Science.gov (United States)

2010-01-01

... and death. (8) Any other evidence or information which may have a bearing on either the responsibility... Procedures and Requirements § 14.23 Evidence and information to be submitted. (a) Death. In support of a claim based on death, the claimant may be required to submit the following evidence or information: (1...

76 FR 26223 - Petition for Rulemaking Submitted by Thomas Popik

Science.gov (United States)

2011-05-06

... Rulemaking Submitted by Thomas Popik AGENCY: Nuclear Regulatory Commission. ACTION: Petition for rulemaking... filed with the NRC by Thomas Popik. The petition was docketed by the NRC on March 15, 2011, and has been... received a petition for rulemaking on March 14, 2011 (PRM- 50-96). The petition was submitted by Mr. Thomas...

WRAP Module 1 data management system (DMS) software design description (SDD)

Energy Technology Data Exchange (ETDEWEB)

Talmage, P.A.

1995-03-17

The Waste Receiving and Processing (WRAP) Module 1 Data Management System (DMS) System Design Description (SDD) describes the logical and physical architecture of the system. The WRAP 1 DMS SDD formally partitions the elements of the system described in the WRAP 1 DMS Software requirements specification into design objects and describes the key properties and relationships among the design objects and interfaces with external systems such as the WRAP Plant Control System (PCS). The WRAP 1 DMS SDD can be thought of as a detailed blueprint for implementation activities. The design descriptions contained within this document will describe, in detail, the software products that will be developed to assist the Project W-026, Waste Receiving and Processing Module 1, in their management functions. The WRAP 1 DMS is required to collect, store, and report data related to certification, tracking, packaging, repackaging, processing, and shipment of waste processed or stored at the WRAP 1 facility.

WRAP Module 1 data management system (DMS) software design description (SDD)

International Nuclear Information System (INIS)

Talmage, P.A.

1995-01-01

The Waste Receiving and Processing (WRAP) Module 1 Data Management System (DMS) System Design Description (SDD) describes the logical and physical architecture of the system. The WRAP 1 DMS SDD formally partitions the elements of the system described in the WRAP 1 DMS Software requirements specification into design objects and describes the key properties and relationships among the design objects and interfaces with external systems such as the WRAP Plant Control System (PCS). The WRAP 1 DMS SDD can be thought of as a detailed blueprint for implementation activities. The design descriptions contained within this document will describe, in detail, the software products that will be developed to assist the Project W-026, Waste Receiving and Processing Module 1, in their management functions. The WRAP 1 DMS is required to collect, store, and report data related to certification, tracking, packaging, repackaging, processing, and shipment of waste processed or stored at the WRAP 1 facility

Influences on physicians' adoption of electronic detailing (e-detailing).

Science.gov (United States)

Alkhateeb, Fadi M; Doucette, William R

2009-01-01

E-detailing means using digital technology: internet, video conferencing and interactive voice response. There are two types of e-detailing: interactive (virtual) and video. Currently, little is known about what factors influence physicians' adoption of e-detailing. The objectives of this study were to test a model of physicians' adoption of e-detailing and to describe physicians using e-detailing. A mail survey was sent to a random sample of 2000 physicians practicing in Iowa. Binomial logistic regression was used to test the model of influences on physician adoption of e-detailing. On the basis of Rogers' model of adoption, the independent variables included relative advantage, compatibility, complexity, peer influence, attitudes, years in practice, presence of restrictive access to traditional detailing, type of specialty, academic affiliation, type of practice setting and control variables. A total of 671 responses were received giving a response rate of 34.7%. A total of 141 physicians (21.0%) reported using of e-detailing. The overall adoption model for using either type of e-detailing was found to be significant. Relative advantage, peer influence, attitudes, type of specialty, presence of restrictive access and years of practice had significant influences on physician adoption of e-detailing. The model of adoption of innovation is useful to explain physicians' adoption of e-detailing.

Compilation of piping benchmark problems - Cooperative international effort

Energy Technology Data Exchange (ETDEWEB)

McAfee, W J [comp.

1979-06-01

This report is the culmination of an effort initiated in 1976 by the IWGFR to evaluate detailed and simplified analysis methods for piping systems with particular emphasis on piping bends. The procedure was to collect from participating member IWGFR countries descriptions of tests and test results for piping systems or bends, to compile, evaluate, and issue a selected number of these problems for analysis, and to compile and make a preliminary evaluation of the analysis results. The Oak Ridge National Laboratory agreed to coordinate this activity, including compilation of the original problems and the final analyses results. Of the problem descriptions submitted three were selected to be used. These were issued in December 1977. As a follow-on activity, addenda were issued that provided additional data or corrections to the original problem statement. A variety of both detailed and simplified analysis solutions were obtained. A brief comparative assessment of the analyses is contained in this report. All solutions submitted have also been included in order to provide users of this report the information necessary to make their own comparisons or evaluations.

Compilation of piping benchmark problems - Cooperative international effort

International Nuclear Information System (INIS)

McAfee, W.J.

1979-06-01

This report is the culmination of an effort initiated in 1976 by the IWGFR to evaluate detailed and simplified analysis methods for piping systems with particular emphasis on piping bends. The procedure was to collect from participating member IWGFR countries descriptions of tests and test results for piping systems or bends, to compile, evaluate, and issue a selected number of these problems for analysis, and to compile and make a preliminary evaluation of the analysis results. The Oak Ridge National Laboratory agreed to coordinate this activity, including compilation of the original problems and the final analyses results. Of the problem descriptions submitted three were selected to be used. These were issued in December 1977. As a follow-on activity, addenda were issued that provided additional data or corrections to the original problem statement. A variety of both detailed and simplified analysis solutions were obtained. A brief comparative assessment of the analyses is contained in this report. All solutions submitted have also been included in order to provide users of this report the information necessary to make their own comparisons or evaluations

44 CFR 65.4 - Right to submit new technical data.

Science.gov (United States)

2010-10-01

... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Right to submit new technical... IDENTIFICATION AND MAPPING OF SPECIAL HAZARD AREAS § 65.4 Right to submit new technical data. (a) A community has..., other than those initiatedby FEMA, must be made in writing by the Chief Executive Officer of the...

37 CFR 2.54 - Requirements for drawings submitted on paper.

Science.gov (United States)

2010-07-01

... submitted on paper. 2.54 Section 2.54 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK... drawings submitted on paper. The drawing must meet the requirements of § 2.52. In addition, in a paper submission, the drawing should: (a) Be on non-shiny white paper that is separate from the application; (b) Be...

15 CFR 325.14 - Submitting reports.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Submitting reports. 325.14 Section 325.14 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) INTERNATIONAL TRADE ADMINISTRATION, DEPARTMENT OF COMMERCE MISCELLANEOUS REGULATIONS EXPORT TRADE CERTIFICATES...

A Descriptive Analysis of Tactical Casualty Care Interventions Performed by Law Enforcement Personnel in the State of Wisconsin, 2010-2015.

Science.gov (United States)

Stiles, Chad M; Cook, Christopher; Sztajnkrycer, Matthew D

2017-06-01

Introduction Based upon military experience, law enforcement has developed guidelines for medical care during high-threat conditions. The purpose of the current study was to provide a descriptive analysis of reported outcomes of law enforcement medical interventions. This was a descriptive analysis of a convenience sample of cases submitted to the Wisconsin Tactical Medicine Initiative (Wisconsin USA), after the provision of successful patient care, between January 2010 and December 2015. The study was reviewed by the Mayo Foundation Institutional Review Board (Rochester, Minnesota USA) and deemed exempt. Nineteen agencies submitted information during the study period. Of the 56 episodes of care reported, four (7.1%) cases involved care provided to injured officers while 52 (92.9%) involved care to injured civilians, including suspects. In at least two cases, on-going threats existed during the provision of medical care to an injured civilian. Law enforcement rendered care prior to Emergency Medical Services (EMS) arrival in all but two cases. The current case series demonstrates the life-saving potential for law enforcement personnel trained and equipped under current Tactical Combat Casualty Care (TCCC)/ Committee on Tactical Emergency Casualty Care (C-TECC) tactical casualty care guidelines. Although originally developed to save the lives of wounded combat personnel, in the civilian sector, the training appears more likely to save victims rather than law enforcement personnel. Stiles CM , Cook C , Sztajnkrycer MD . A descriptive analysis of tactical casualty care interventions performed by law enforcement personnel in the State of Wisconsin, 2010-2015. Prehosp Disaster Med. 2017;32(3):284-288.

28 CFR 54.225 - Educational institutions eligible to submit transition plans.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Educational institutions eligible to submit transition plans. 54.225 Section 54.225 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED... Coverage § 54.225 Educational institutions eligible to submit transition plans. (a) Application. This...

Low-Complexity Multiple Description Coding of Video Based on 3D Block Transforms

Directory of Open Access Journals (Sweden)

Andrey Norkin

2007-02-01

Full Text Available The paper presents a multiple description (MD video coder based on three-dimensional (3D transforms. Two balanced descriptions are created from a video sequence. In the encoder, video sequence is represented in a form of coarse sequence approximation (shaper included in both descriptions and residual sequence (details which is split between two descriptions. The shaper is obtained by block-wise pruned 3D-DCT. The residual sequence is coded by 3D-DCT or hybrid, LOT+DCT, 3D-transform. The coding scheme is targeted to mobile devices. It has low computational complexity and improved robustness of transmission over unreliable networks. The coder is able to work at very low redundancies. The coding scheme is simple, yet it outperforms some MD coders based on motion-compensated prediction, especially in the low-redundancy region. The margin is up to 3 dB for reconstruction from one description.

Windows Calorimeter Control (WinCal) program computer software design description

International Nuclear Information System (INIS)

Pertzborn, N.F.

1997-01-01

The Windows Calorimeter Control (WinCal) Program System Design Description contains a discussion of the design details for the WinCal product. Information in this document will assist a developer in maintaining the WinCal system. The content of this document follows the guidance in WHC-CM-3-10, Software Engineering Standards, Standard for Software User Documentation

PC-based Multiple Information System Interface (PC/MISI) detailed design and implementation plan

Science.gov (United States)

Dominick, Wayne D. (Editor); Hall, Philip P.

1985-01-01

The design plan for the personal computer multiple information system interface (PC/MISI) project is discussed. The document is intended to be used as a blueprint for the implementation of the system. Each component is described in the detail necessary to allow programmers to implement the system. A description of the system data flow and system file structures is given.

Database Description - tRNADB-CE | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available switchLanguage; BLAST Search Image Search Home About Archive Update History Data List Contact us tRNAD...B-CE Database Description General information of database Database name tRNADB-CE Alter...CC BY-SA Detail Background and funding Name: MEXT Integrated Database Project Reference(s) Article title: tRNAD... 2009 Jan;37(Database issue):D163-8. External Links: Article title: tRNADB-CE 2011: tRNA gene database curat...n Download License Update History of This Database Site Policy | Contact Us Database Description - tRNADB-CE | LSDB Archive ...

25 CFR 533.2 - Time for submitting management contracts and amendments.

Science.gov (United States)

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false Time for submitting management contracts and amendments. 533.2 Section 533.2 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR MANAGEMENT CONTRACT PROVISIONS APPROVAL OF MANAGEMENT CONTRACTS § 533.2 Time for submitting management contracts and...

Detailed descriptions of overall performance indicators

Energy Technology Data Exchange (ETDEWEB)

NONE

1988-02-15

The purpose of the equivalent availability factor indicator is to monitor progress in attaining high unit and industry equivalent availability. It provides an indication of the effectiveness of plant programs and practices in maximizing electrical generation and provides an overall indication of how well a plant is operated and maintained. Experience has shown that units with high equivalent availability factors and low forced outage rates are often well maintained, follow good operating practices, and can be expected to have a higher margin of safety.

Detailed descriptions of overall performance indicators

International Nuclear Information System (INIS)

1988-02-01

The purpose of the equivalent availability factor indicator is to monitor progress in attaining high unit and industry equivalent availability. It provides an indication of the effectiveness of plant programs and practices in maximizing electrical generation and provides an overall indication of how well a plant is operated and maintained. Experience has shown that units with high equivalent availability factors and low forced outage rates are often well maintained, follow good operating practices, and can be expected to have a higher margin of safety

The detail is dead - long live the detail!

DEFF Research Database (Denmark)

Larsen, Steen Nepper; Dalgaard, Kim; Kerstens, Vencent

2018-01-01

architecture when we look into architectural history. Too classic examples are; Adolf Loos who provoked already in 1908 with his statement; "Ornament and Crime", which contested the unconscious decorations of contemporary architects. Similarly, referring to the little need for superfluous detailing; "Less...... not change the fact that it is more important than ever to bring this 'small' architectural world to attention. Today, the construction industry is dictated by an economic management that does not leave much room for thorough studies of architectural details or visionary experiments. Today's more efficient......_Delft about the Symposium; "The Detail is Dead - Long Live the Detail". For this occasion a number of leading Danish and Northern European architects, researchers and companies were invited to discuss and suggest their 'architectural detail' and the challenges they face in today's construction. This book...

Comparative assessment of TRU waste forms and processes. Volume II. Waste form data, process descriptions, and costs

International Nuclear Information System (INIS)

Ross, W.A.; Lokken, R.O.; May, R.P.; Roberts, F.P.; Thornhill, R.E.; Timmerman, C.L.; Treat, R.L.; Westsik, J.H. Jr.

1982-09-01

This volume contains supporting information for the comparative assessment of the transuranic waste forms and processes summarized in Volume I. Detailed data on the characterization of the waste forms selected for the assessment, process descriptions, and cost information are provided. The purpose of this volume is to provide additional information that may be useful when using the data in Volume I and to provide greater detail on particular waste forms and processes. Volume II is divided into two sections and two appendixes. The first section provides information on the preparation of the waste form specimens used in this study and additional characterization data in support of that in Volume I. The second section includes detailed process descriptions for the eight processes evaluated. Appendix A lists the results of MCC-1 leach test and Appendix B lists additional cost data. 56 figures, 12 tables

20 CFR 10.801 - How are medical bills to be submitted?

Science.gov (United States)

2010-04-01

... employees, except for treatment and supplies provided by nursing homes, shall be supported by medical... separate bill shall be submitted when the employee is discharged from treatment or monthly, if treatment for the work-related condition is necessary for more than 30 days. (1)(i) Hospitals shall submit...

40 CFR 152.93 - Citation of a previously submitted valid study.

Science.gov (United States)

2010-07-01

... Data Submitters' Rights § 152.93 Citation of a previously submitted valid study. An applicant may demonstrate compliance for a data requirement by citing a valid study previously submitted to the Agency. The... the original data submitter, the applicant may cite the study only in accordance with paragraphs (b...

30 CFR 210.104 - Must I submit these production reports electronically?

Science.gov (United States)

2010-07-01

... MINERALS REVENUE MANAGEMENT FORMS AND REPORTS Production Reports-Oil and Gas § 210.104 Must I submit these... Production Reporter Handbook for the most current reporting options, instructions, and security measures. The... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Must I submit these production reports...

27 CFR 73.31 - May I submit forms electronically to TTB?

Science.gov (United States)

2010-04-01

... TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Filing of Documents with TTB § 73.31 May I submit forms electronically to TTB? Yes; you may submit an electronic form, instead of a paper form, to satisfy any reporting...

Waste Management Systems Requirements and Descriptions (SRD)

International Nuclear Information System (INIS)

Conner, C.W.

1986-01-01

The Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) is responsible for the development of a system for the management of high-level radioactive waste and spent fuel in accordance with the Nuclear Waste Policy Act of 1982. The Waste Management system requirements and description document is the program-level technical baseline document. The requirements include the functions that must be performed in order to achieve the system mission and performance criteria for those functions. This document covers only the functional requirements of the system; it does not cover programmatic or procedural requirements pertaining to the processes of designing, siting and licensing. The requirements are largely based on the Nuclear Waste Policy Act of 1982, Environmental Protection Agency standards, Nuclear Regulatory Commission regulations, and DOE orders and guidance. However, nothing in this document should be construed as to relieve the DOE or its contractors from their responsibilities to comply with applicable statutes, regulations, and standards. This document also provides a brief description of the system being developed to meet the requirements. In addition to the described ''authorized system,'' a system description is provided for an ''improved-performance system'' which would include a monitored retrievable storage (MRS) facility. In the event that an MRS facility is approved by Congress, the improved-performance system will become the reference system. Neither system description includes Federal Interim Storage (FIS) capabilities. Should the need for FIS be identified, it will be included as an additional system element. The descriptions are focused on the interfaces between the system elements, rather than on the detail of the system elements themselves

Complete description of photon trajectories in the Kerr-Newman space-time

Energy Technology Data Exchange (ETDEWEB)

Calvani, M [Padua Univ. (Italy). Ist. di Astronomia; Turolla, R [International School for Advanced Studies, Trieste (Italy)

1981-08-01

The complete description of null trajectories in the Kerr-Newman space-time is given in terms of the parameters of the source and of the constants of motion. The conditions for orbital and vortical motion are studied in detail and the locus of turning points is given for any choice of the parameters.

Planning of cascade stations on the Maotiao He detailed

Energy Technology Data Exchange (ETDEWEB)

Guan, W

1984-09-20

Details of the hydroelectric power stations on the Maotiao He cascades and examples of how some problems were resolved begin with a description of the river basin survey for topographical features, hydrometeorological conditions, and geological conditions. The river characteristics survey was the basis for planning the cascade power stations and the selection of installed capacity at each station. The review also covers discharge and flood control planning based on rainfall data and the composition of flood areas. The overall development program emphasizes power generation, but also includes irrigation, industrial water supply, and tourism. 2 figures, 1 table.

Description of a new species of the genus Bitomus Szepligeti (Hymenoptera: Braconidaefrom India

Directory of Open Access Journals (Sweden)

A. Samiuddin

2010-03-01

Full Text Available A new species of Bitomus Szepligeti is described and illustrated from India. The taxonomic validity of new species has been supported by description of detail morphology, four illustrations and detail discussion. Its distinguishing characters from other closely related species are also discussed. These are: clypeus 1.3x as wide as high, mesonotum 0.8x as wide as long, propodeum with a short mid-longitudinal carina anteriorly, vain r arising from basal third of stigma.

Degradation study of Durolon polycarbonate submitted to gamma radiation

International Nuclear Information System (INIS)

Miranda, A.; Sciani, V.

1992-01-01

The effect of gamma radiation from a cobalt 60 source in the 27000 Durolon polycarbonate irradiated with doses between 0,2 and 1000 kGy at 25 0 C was analyzed. For this reason the samples was submitted to the mechanical assay of tension, deformation and hardness and optical assay of transmittance. The obtained results show a good mechanical stability of the polycarbonate, when it was submitted to gamma irradiation in doses up to 20 kGy. (C.G.C.). 05 refs., 04 figs

31 CFR 103.81 - Submitting requests.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Submitting requests. 103.81 Section 103.81 Money and Finance: Treasury Regulations Relating to Money and Finance FINANCIAL RECORDKEEPING... which the request is made. (b) A request filed by a corporation shall be signed by a corporate officer...

WRAP Module 1 data management system (DMS) software design description (SDD)

International Nuclear Information System (INIS)

Weidert, J.R.

1996-01-01

Revision 2 of the Waste Receiving and Processing (WRAP) Module 1 Data Management System (DMS) Preliminary Software Design Description (PSDD) provides a high-level design description of the system. The WRAP 1 DMS is required to collect, store, and report data related to certification, tracking, packaging, repackaging, processing, and shipment of waste processed or stored at the WRAP 1 facility. The WRAP 1 DMS SDD is used as the primary medium for communication software design information. This release provides design descriptions for the following process modules produced under Phase 1 of the development effort: Receiving Drum or Box Containers Process Routing and Picklists; Waste Inventory by Location and/or Container Relationships; LLW Process Glovebox Facility Radiologic Material Inventory Check (partial); Shipping (partial production); Drum or Box NDE Operations; and Drum or Box NDA Operations Data Review (partial production). In addition, design descriptions are included for the following process modules scheduled for development under Phases 2 and 3: Activity Comment; LLW RWM Glovebox Sample Management; TRU Process Glovebox; TRU RWM Glovebox; and TRUPACT Processing. Detailed design descriptions for Reports and Facility Metrics have also been provided for in Revision 2 of this document

Simpevarp - site descriptive model version 0

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-11-01

During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

Discrete processes modelling and geometry description in RTS and T code

International Nuclear Information System (INIS)

Degtyarev, I.I.; Liashenko, O.A.; Lokhovitskii, A.E.; Yazynin, I.A.; Belyakov-Bodin, V.I.; Blokhin, A.I.

2001-01-01

This paper describes the recent version of the RTS and T code system. RTS and T performs detailed simulations of many types of particles transport in complex 3D geometries in the energy range from a part of eV up to 20 TeV. A description of the main processes is given. (author)

40 CFR 63.8818 - What reports must I submit and when?

Science.gov (United States)

2010-07-01

... other daily calibration checks. (f) The compliance report for a new or reconstructed flame lamination... not included in the list submitted with the Notification of Compliance Status in § 63.8816(h) (1), an... approved a different schedule for submission of reports under § 63.10(a), you must submit each compliance...

Control of hydrogen sulfide emission from geothermal power plants. Volume III. Final report: demonstration plant equipment descriptions, test plan, and operating instructions

Energy Technology Data Exchange (ETDEWEB)

Brown, F.C.; Harvey, W.W.; Warren, R.B.

1977-01-01

The elements of the final, detailed design of the demonstration plant for the copper sulfate process for the removal of hydrogen sulfide from geothermal steam are summarized. Descriptions are given of all items of equipment in sufficient detail that they can serve as purchase specifications. The process and mechanical design criteria which were used to develop the specifications, and the process descriptions and material and energy balance bases to which the design criteria were applied are included. (MHR)

The athena data dictionary and description language

International Nuclear Information System (INIS)

Bazan, A.; Ghez, P.; Le Flour, T.; Lieunard, S.; Tull, C.

2001-01-01

The authors have developed a data object description tool suite and service for Athena consisting of: a language grammar based upon an extended proper subset of IDL 2.0, a compiler front end based upon this language grammar, JavaCC, and a Java Reflection API-like interface, and several compiler back ends which meet specific needs in ATLAS such as automatic generation of object converters, and data object scripting interfaces. The authors present here details of the work and experience to date on the Athena Definition Language and Athena Data Dictionary

The Athena Data Dictionary and Description Language

CERN Document Server

Bazan, A; Ghez, P; Marino, M; Tull, C

2003-01-01

Athena is the ATLAS off-line software framework, based upon the GAUDI architecture from LHCb. As part of ATLAS' continuing efforts to enhance and customise the architecture to meet our needs, we have developed a data object description tool suite and service for Athena. The aim is to provide a set of tools to describe, manage, integrate and use the Event Data Model at a design level according to the concepts of the Athena framework (use of patterns, relationships, ...). Moreover, to ensure stability and reusability this must be fully independent from the implementation details. After an extensive investigation into the many options, we have developed a language grammar based upon a description language (IDL, ODL) to provide support for object integration in Athena. We have then developed a compiler front end based upon this language grammar, JavaCC, and a Java Reflection API-like interface. We have then used these tools to develop several compiler back ends which meet specific needs in ATLAS such as automatic...

Waste receiving and processing plant control system; system design description

Energy Technology Data Exchange (ETDEWEB)

LANE, M.P.

1999-02-24

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1.

Waste receiving and processing plant control system; system design description

International Nuclear Information System (INIS)

LANE, M.P.

1999-01-01

The Plant Control System (PCS) is a heterogeneous computer system composed of numerous sub-systems. The PCS represents every major computer system that is used to support operation of the Waste Receiving and Processing (WRAP) facility. This document, the System Design Description (PCS SDD), includes several chapters and appendices. Each chapter is devoted to a separate PCS sub-system. Typically, each chapter includes an overview description of the system, a list of associated documents related to operation of that system, and a detailed description of relevant system features. Each appendice provides configuration information for selected PCS sub-systems. The appendices are designed as separate sections to assist in maintaining this document due to frequent changes in system configurations. This document is intended to serve as the primary reference for configuration of PCS computer systems. The use of this document is further described in the WRAP System Configuration Management Plan, WMH-350, Section 4.1

Rock Visualization System. Technical description (RVS v.3.5)

Energy Technology Data Exchange (ETDEWEB)

Curtis, P.; Elfstroem, M.; Markstroem, I. [FB Engineering, Goeteborg (Sweden)

2004-03-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. It is a description of RVS version 3.5. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples; Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

Rock Visualization System. Technical description (RVS v.3.5)

International Nuclear Information System (INIS)

Curtis, P.; Elfstroem, M.; Markstroem, I.

2004-03-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. It is a description of RVS version 3.5. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples; Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system

Author Details

African Journals Online (AJOL)

Details PDF · Vol 22, No 2 (1999) - Articles Vegetation under different tree species in Acacia woodland in the Rift Valley of Ethiopia Details PDF · Vol 22, No 2 (1999) - Articles Preliminary evaluation of Phytomyza orobanchia (Diptera: Agromyzidae) as a controller of Orobanche spp in Ethiopia Details PDF. ISSN: 2520–7997.

75 FR 8364 - Proposed Data Collections Submitted for Public Comment and Recommendations

Science.gov (United States)

2010-02-24

... on proposed data collection projects, the Centers for Disease Control and Prevention (CDC) will... data base containing identifying death record information submitted annually to NCHS by all the State...] Proposed Data Collections Submitted for Public Comment and Recommendations In compliance with the...

Research ethics review at University Eduardo Mondlane (UEM)/Maputo Central Hospital, Mozambique (2013-2016): a descriptive analysis of the start-up of a new research ethics committee (REC).

Science.gov (United States)

Sacarlal, Jahit; Muchanga, Vasco; Mabutana, Carlos; Mabui, Matilde; Mariamo, Arlete; Cuamba, Assa Júlio; Fumo, Leida Artur; Silveira, Jacinta; Heitman, Elizabeth; Moon, Troy D

2018-05-23

Mozambique has seen remarkable growth in biomedical research over the last decade. To meet a growing need, the National Committee for Bioethics in Health of Mozambique (CNBS) encouraged the development of ethical review processes at institutions that regularly conduct medical and social science research. In 2012, the Faculty of Medicine (FM) of University Eduardo Mondlane (UEM) and the Maputo Central Hospital (MCH) established a joint Institutional Committee on Bioethics for Health (CIBS FM & MCH). This study examines the experience of the first 4 years of the CIBS FM & MCH. This study provides a descriptive, retrospective analysis of research protocols submitted to and approved by the CIBS FM & MCH between March 1, 2013 and December 31, 2016, together with an analysis of the Committee's respective reviews and actions. A total of 356 protocols were submitted for review during the period under analysis, with 309 protocols approved. Sixty-four percent were submitted by students, faculty, and researchers from UEM, mainly related to Master's degree research (42%). Descriptive cross-sectional studies were the most frequently reviewed research (61%). The majority were prospective (71%) and used quantitative methodologies (51%). The Departments of Internal Medicine at MCH and Community Health at the FM submitted the most protocols from their respective institutions, with 38 and 53% respectively. The CIBS's average time to final approval for all protocols was 56 days, rising to 161 for the 40 protocols that required subsequent national-level review by the CNBS. Our results show that over its first 4 years, the CIBS FM & MCH has been successful in managing a constant demand for protocol review and that several broad quality improvement initiatives, such as investigator mentoring and an electronic protocol submission platform have improved efficiency in the review process and the overall quality of the protocols submitted. Beyond Maputo, long-term investments in training

30 CFR 254.7 - How do I submit my response plan to the MMS?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I submit my response plan to the MMS... do I submit my response plan to the MMS? You must submit the number of copies of your response plan that the appropriate MMS regional office requires. If you prefer to use improved information technology...

Olkiluoto site description 2006

International Nuclear Information System (INIS)

Andersson, J.; Ahokas, H.; Hudson, J.A.

2007-03-01

demonstrates an evolving confidence in the Site Description. It is also concluded that the main remaining challenge of the site characterisation work is to properly assess the confidence in the Site Description outside the well-characterised ONKALO volume, and actions have been identified in order to handle this. The remaining uncertainty issues are presented in Chapter 11 and are associated with the detailed scale characterisation of the rock - plans and actions for their resolution have also been identified. (orig.)

21 CFR 720.7 - Notification of person submitting cosmetic product ingredient statement.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Notification of person submitting cosmetic product... AND HUMAN SERVICES (CONTINUED) COSMETICS VOLUNTARY FILING OF COSMETIC PRODUCT INGREDIENT COMPOSITION STATEMENTS § 720.7 Notification of person submitting cosmetic product ingredient statement. When Form FDA...

Description of the Nuclear Training Centre

International Nuclear Information System (INIS)

Wagadarikar, V.K.

1974-01-01

The Department of Atomic Energy, Government of India has developed an on-going programme for constructing and operating heavy water moderated, natural uranium fuelled power stations of the CANDU-type. With the view to train personnel required for operation and maintenance of these stations, a Nuclear Training Centre has been set up at the site of the Rajasthan Atomic Power Station. A description of the nuclear training centre with its facilities is given. The training programme for engineers, operators, mechanical, electrical and control maintainers etc. is given in detail, along with the actual syllabi for respective courses. Examples of the typical field check list are provided. (K.B.)

49 CFR Appendix II to Part 805 - Employees Required To Submit Statements

Science.gov (United States)

2010-10-01

...—Employees Required To Submit Statements Statements of employment and financial interests are required of the... 49 Transportation 7 2010-10-01 2010-10-01 false Employees Required To Submit Statements II...) Office of the managing director: (1) Legislative affairs officer. (2) Program analysis officer. (d...

HDR IMAGING FOR FEATURE DETECTION ON DETAILED ARCHITECTURAL SCENES

Directory of Open Access Journals (Sweden)

G. Kontogianni

2015-02-01

Full Text Available 3D reconstruction relies on accurate detection, extraction, description and matching of image features. This is even truer for complex architectural scenes that pose needs for 3D models of high quality, without any loss of detail in geometry or color. Illumination conditions influence the radiometric quality of images, as standard sensors cannot depict properly a wide range of intensities in the same scene. Indeed, overexposed or underexposed pixels cause irreplaceable information loss and degrade digital representation. Images taken under extreme lighting environments may be thus prohibitive for feature detection/extraction and consequently for matching and 3D reconstruction. High Dynamic Range (HDR images could be helpful for these operators because they broaden the limits of illumination range that Standard or Low Dynamic Range (SDR/LDR images can capture and increase in this way the amount of details contained in the image. Experimental results of this study prove this assumption as they examine state of the art feature detectors applied both on standard dynamic range and HDR images.

28 CFR 14.4 - Administrative claims; evidence and information to be submitted.

Science.gov (United States)

2010-07-01

... bearing on either the responsibility of the United States for the death or the damages claimed. (b... submitted. (a) Death. In support of a claim based on death, the claimant may be required to submit the following evidence or information: (1) An authenticated death certificate or other competent evidence...

20 CFR 669.510 - What planning documents must an NFJP grantee submit?

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What planning documents must an NFJP grantee submit? 669.510 Section 669.510 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF... Accountability, Planning and Waiver Provision § 669.510 What planning documents must an NFJP grantee submit? Each...

Syntactic Structures as Descriptions of Sensorimotor Processes

Directory of Open Access Journals (Sweden)

Alistair Knott

2014-02-01

Full Text Available In this paper I propose a hypothesis linking elements of a model of theoretical syntax with neural mechanisms in the domain of sensorimotor processing. The syntactic framework I adopt to express this linking hypothesis is Chomsky’s Minimalism: I propose that the language-independent ’Logical Form’ (LF of a sentence reporting a concrete episode in the world can be interpreted as a detailed description of the sensorimotor processes involved in apprehending that episode. The hypothesis is motivated by a detailed study of one particular episode, in which an agent grasps a target object. There are striking similarities between the LF structure of transitive sentences describing this episode and the structure of the sensorimotor processes through which it is apprehended by an observer. The neural interpretation of Minimalist LF structure allows it to incorporate insights from empiricist accounts of syntax, relating to sentence processing and to the learning of syntactic constructions.

Integrated Project Management System description

International Nuclear Information System (INIS)

1994-09-01

The Integrated Program Management System (IPMS) Description is a ''working'' document that describes the work processes of the Uranium Mill Tailings Remedial Action Project Office (UMTRA) and IPMS Group. This document has undergone many revisions since the UMTRA Project began; this revision not only updates the work processes but more clearly explains the relationships between the Project Office, contractors, and other participants. The work process flow style has been revised to better describe Project work and the relationships of participants. For each work process, more background and guidance on ''why'' and ''what is expected'' is given. For example, a description of activity data sheets has been added in the work organization and the Project performance and reporting processes, as well as additional detail about the federal budget process and funding management and improved flow charts and explanations of cost and schedule management. A chapter has been added describing the Cost Reduction/Productivity Improvement Program. The Change Control Board (CCB) procedures (Appendix A) have been updated. Project critical issues meeting (PCIM) procedures have been added as Appendix B. Budget risk assessment meeting procedures have been added as Appendix C. These appendices are written to act as stand-alone documentation for each process. As the procedures are improved and updated, the documentation can be updated separately

TPX: Contractor preliminary design review. Volume 1, Presentation and design description. Final report

International Nuclear Information System (INIS)

Hartman, D.; Naumovich; Walstrom, P.; Clarkson, I.; Schultheiss, J.; Burger, A.

1995-01-01

This first volume of the five volume set begins with a CPDR overview and then details the PF magnet system, manufacturing R ampersand D, Westinghouse R ampersand D, the central solenoid, the PF 5 ring coil, the PF 6/7 ring coil, quality assurance, and the system design description

Developing a model for the adequate description of electronic communication in hospitals.

Science.gov (United States)

Saboor, Samrend; Ammenwerth, Elske

2011-01-01

Adequate information and communication systems (ICT) can help to improve the communication in hospitals. Changes to the ICT-infrastructure of hospitals must be planed carefully. In order to support a comprehensive planning, we presented a classification of 81 common errors of the electronic communication on the MIE 2008 congress. Our objective now was to develop a data model that defines specific requirements for an adequate description of electronic communication processes We first applied the method of explicating qualitative content analysis on the error categorization in order to determine the essential process details. After this, we applied the method of subsuming qualitative content analysis on the results of the first step. A data model for the adequate description of electronic communication. This model comprises 61 entities and 91 relationships. The data model comprises and organizes all details that are necessary for the detection of the respective errors. It can be for either used to extend the capabilities of existing modeling methods or as a basis for the development of a new approach.

40 CFR 60.2755 - When must I submit my waste management plan?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... waste management plan? You must submit the waste management plan no later than the date specified in... Compliance Times for Commercial and Industrial Solid Waste Incineration Units that Commenced Construction On...

30 CFR 250.468 - What well records am I required to submit?

Science.gov (United States)

2010-07-01

... OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations...) You must submit copies of logs or charts of electrical, radioactive, sonic, and other well-logging... drilling operations in the GOM OCS Region, you must submit form MMS-133, Well Activity Report, to the...

45 CFR 35.4 - Administrative claims; evidence and information to be submitted.

Science.gov (United States)

2010-10-01

... bearing on either the responsibility of the United States for the death or the damages claimed. (b... information to be submitted. (a) Death. In support of a claim based on death, the claimant may be required to submit the following evidence or information: (1) An authenticated death certificate or other competent...

CDMS: CAD data set system design description. Revision 1

International Nuclear Information System (INIS)

Gray, E.L.

1994-01-01

This document is intended to formalize the program design of the CAD Data Set Management System (CDMS) and to be the vehicle to communicate the design to the Engineering, Design Services, and Configuration Management organizations and the WHC IRM Analysts/Programmers. The SDD shows how the software system will be structured to satisfy the requirements identified in the WHC-SD-GN-CSRS-30005 CDMS Software Requirement Specification (SRS). It is a description of the software structure, software components, interfaces, and data that make up the CDMS System. The design descriptions contained within this document will describe in detail the software product that will be developed to assist the aforementioned organizations for the express purpose of managing CAD data sets associated with released drawings, replacing the existing locally developed system and laying the foundation for automating the configuration management

Telidon Videotex presentation level protocol: Augmented picture description instructions

Science.gov (United States)

Obrien, C. D.; Brown, H. G.; Smirle, J. C.; Lum, Y. F.; Kukulka, J. Z.; Kwan, A.

1982-02-01

The Telidon Videotex system is a method by which graphic and textual information and transactional services can be accessed from information sources by the general public. In order to transmit information to a Telidon terminal at a minimum bandwidth, and in a manner independent of the type of communications channel, a coding scheme was devised which permits the encoding of a picture into the geometric drawing elements which compose it. These picture description instructions are an alpha geometric coding model and are based on the primitives of POINT, LINE, ARC, RECTANGLE, POLYGON, and INCREMENT. Text is encoded as (ASCII) characters along with a supplementary table of accents and special characters. A mosaic shape table is included for compatibility. A detailed specification of the coding scheme and a description of the principles which make it independent of communications channel and display hardware are provided.

Descriptive Research

DEFF Research Database (Denmark)

Wigram, Anthony Lewis

2003-01-01

Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...

12 CFR 793.4 - Administrative claims; evidence and information to be submitted.

Science.gov (United States)

2010-01-01

... evidence or information which may have a bearing on the responsibility of the United States for the death... GOVERNMENT Procedures § 793.4 Administrative claims; evidence and information to be submitted. (a) Death. In support of a claim based on death, the claimant may be required to submit the following evidence or...

18 CFR 154.302 - Previously submitted material.

Science.gov (United States)

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Previously submitted material. 154.302 Section 154.302 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... concurrently with the rate change filing. There must be furnished to the Director, Office of Energy Market...

AUDITORY REHABILITATION AND BILATERAL COCHLEAR IMPLANT ON CHILD WHITH CEREBRAL PALSY

OpenAIRE

Anacléia Melo da Silva Hilgenberg; Fernanda Ferreira Caldas; Tatiana Mendes de Melo; Fayez Bahmad Jr.

2013-01-01

OBJECTIVE: To describe the hearing and language improvement in children with cerebral palsy submitted to cochlear implantation bilaterally. METHODS: Prospective, analytical descriptive. Study case and a broad bibliographical analysis in MEDLINE/PUBMED and EMBASE including detailed analysis of the rehabilitation techniques as serial phonoaudiological appointments; Sessions of phonoterapy recorded and criterious analysis of the tests such as IT-MAIS and MacArthur analysis. The teste were applie...

Description of a practice model for pharmacist medication review in a general practice setting

DEFF Research Database (Denmark)

Brandt, Mette; Hallas, Jesper; Hansen, Trine Graabæk

2014-01-01

BACKGROUND: Practical descriptions of procedures used for pharmacists' medication reviews are sparse. OBJECTIVE: To describe a model for medication review by pharmacists tailored to a general practice setting. METHODS: A stepwise model is described. The model is based on data from the medical chart...... no indication (n=47, 23%). Most interventions were aimed at cardiovascular drugs. CONCLUSION: We have provided a detailed description of a practical approach to pharmacists' medication review in a GP setting. The model was tested and found to be usable, and to deliver a medication review with high acceptance...

Core sample descriptions and summary logs of six wells within the Hanford Reservation

International Nuclear Information System (INIS)

Summers, W.K.; Hanson, R.T.

1977-01-01

From February through May, 1976, selected sites on the Hanford Reservation were core drilled. These six holes provide a loose network of observation holes traversing the reservation in an east--west direction between the Columbia River and State Highway 240. This program represents the first attempt to recover cores from the glaciofluviatile material and Ringold Formation beneath the Hanford Reservation. This contains three parts: an introductory text describing the method of inspection and format for written description; summary logs that illustrate in condensed form the rocks penetrated by the wells drilled; and the detailed written descriptions of core samples. 3 figures, 7 tables

Hypothetical Case and Scenario Description for International Transportation of Spent Nuclear Fuel.

Energy Technology Data Exchange (ETDEWEB)

Williams, Adam David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Osborn, Douglas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Katherine A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kalinina, Elena Arkadievna [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Cohn, Brian [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Thomas, Maikael A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Parks, Mancel Jordan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Parks, Ethan Rutledge [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mohagheghi, Amir H. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-12-01

To support more rigorous analysis on global security issues at Sandia National Laboratories (SNL), there is a need to develop realistic data sets without using "real" data or identifying "real" vulnerabilities, hazards or geopolitically embarrassing shortcomings. In response, an interdisciplinary team led by subject matter experts in SNL's Center for Global Security and Cooperation (CGSC) developed a hypothetical case description. This hypothetical case description assigns various attributes related to international SNF transportation that are representative, illustrative and indicative of "real" characteristics of "real" countries. There is no intent to identify any particular country and any similarity with specific real-world events is purely coincidental. To support the goal of this report to provide a case description (and set of scenarios of concern) for international SNF transportation inclusive of as much "real-world" complexity as possible -- without crossing over into politically sensitive or classified information -- this SAND report provides a subject matter expert-validated (and detailed) description of both technical and political influences on the international transportation of spent nuclear fuel. [PAGE INTENTIONALLY LEFT BLANK

Water Resources Research Grant Program project descriptions, fiscal year 1987

Science.gov (United States)

,

1987-01-01

This report contains information on the 34 new projects funded by the United States Geological Survey 's Water Resources Research Grant Program in fiscal year 1987 and on 3 projects completed during the year. For the new projects, the report gives the grant number, project title, performing organization, principal investigator(s), and a project description that includes: (1) identification of water related problems and problem-solution approach (2) contribution to problem solution, (3) objectives, and (4) approach. The 34 projects include 12 in the area of groundwater quality problems, 12 in the science and technology of water quality management, 1 in climate variability and the hydrologic cycle, 4 in institutional change in water resources management, and 5 in surface water management. For the three completed projects, the report furnishes the grant number; project title; performing organization; principal investor(s); starting data; data of receipt of final report; and an abstract of the final report. Each project description provides the information needed to obtain a copy of the final report. The report contains tables showing: (1) proposals received according to area of research interest, (2) grant awards and funding according to area of research interest, (3) proposals received according to type of submitting organization, and (4) awards and funding according to type of organization. (Author 's abstract)

1993 baseline solid waste management system description

International Nuclear Information System (INIS)

Armacost, L.L.; Fowler, R.A.; Konynenbelt, H.S.

1994-02-01

Pacific Northwest Laboratory has prepared this report under the direction of Westinghouse Hanford Company. The report provides an integrated description of the system planned for managing Hanford's solid low-level waste, low-level mixed waste, transuranic waste, and transuranic mixed waste. The primary purpose of this document is to illustrate a collective view of the key functions planned at the Hanford Site to handle existing waste inventories, as well as solid wastes that will be generated in the future. By viewing this system as a whole rather than as individual projects, key facility interactions and requirements are identified and a better understanding of the overall system may be gained. The system is described so as to form a basis for modeling the system at various levels of detail. Model results provide insight into issues such as facility capacity requirements, alternative system operating strategies, and impacts of system changes (ie., startup dates). This description of the planned Hanford solid waste processing system: defines a baseline system configuration; identifies the entering waste streams to be managed within the system; identifies basic system functions and waste flows; and highlights system constraints. This system description will evolve and be revised as issues are resolved, planning decisions are made, additional data are collected, and assumptions are tested and changed. Out of necessity, this document will also be revised and updated so that a documented system description, which reflects current system planning, is always available for use by engineers and managers. It does not provide any results generated from the many alternatives that will be modeled in the course of analyzing solid waste disposal options; such results will be provided in separate documents

75 FR 60404 - Information Collection Request Submitted to Office of Management and Budget

Science.gov (United States)

2010-09-30

... [OMB Control Number: 3002-0003] Information Collection Request Submitted to Office of Management and... United States will submit an Information Collection Request (ICR) to the Office of Management and Budget (OMB) requesting approval for the following collection of information: 3002-0003, Substitute...

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... An algorithm to retrieve Land Surface Temperature using Landsat-8 Dataset Abstract PDF. ISSN: 2225-8531.

APT Blanket Detailed Bin Model Based on Initial Plate-Type Design -3D FLOWTRAN-TF Model

International Nuclear Information System (INIS)

Hamm, L.L.

1998-01-01

This report provides background information for a series of reports documenting accident scenario simulations for the Accelerator Production of Tritium (APT) blanket heat removal systems. The simulations were performed in support of the Preliminary Safety Analysis Report for the APT. This report gives a brief description of the FLOWTRAN-TF code which was used for detailed blanket bin modeling

Mathematical description and program documentation for CLASSY, an adaptive maximum likelihood clustering method

Science.gov (United States)

Lennington, R. K.; Rassbach, M. E.

1979-01-01

Discussed in this report is the clustering algorithm CLASSY, including detailed descriptions of its general structure and mathematical background and of the various major subroutines. The report provides a development of the logic and equations used with specific reference to program variables. Some comments on timing and proposed optimization techniques are included.

Employing Picture Description to Assess the Students' Descriptive Paragraph Writing

Directory of Open Access Journals (Sweden)

Ida Ayu Mega Cahyani

2018-03-01

Full Text Available Writing is considered as an important skill in learning process which is needed to be mastered by the students. However, in teaching learning process at schools or universities, the assessment of writing skill is not becoming the focus of learning process and the assessment is administered inappropriately. In this present study, the researcher undertook the study which dealt with assessing descriptive paragraph writing ability of the students through picture description by employing an ex post facto as the research design. The present study was intended to answer the research problem dealing with the extent of the students’ achievement of descriptive paragraph writing ability which is assessed through picture description. The samples under the study were 40 students determined by means of random sampling technique with lottery system. The data were collected through administering picture description as the research instrument. The obtained data were analyzed by using norm-reference measure of five standard values. The results of the data analysis showed that there were 67.50% samples of the study were successful in writing descriptive paragraph, while there were 32.50% samples were unsuccessful in writing descriptive paragraph which was assessed by administering picture description test

Probabilistic endowment appraisal system based upon the formalization of geologic decisions. General description

International Nuclear Information System (INIS)

Harris, D.P.; Carrigan, F.J.

1980-04-01

The objectives of this study include the design of an appraisal system which has the following features: estimates uranium endowment, not resources; formalizes the geologist's geoscience and assists the geologist in the exercise of his geoscience; describes the probability distribution for uranium endowment; diminishes or at least does not contribute to psychometric biases; provides for anonymous exchange among multiple experts of tenets of geoscience, but not the exchange of endowment estimates; provides an endowment estimate based upon geoscience only; is not easily gamed or manipulated; and provides for a quick and easy review of geoscience and resource information. This report is reflective of its title, a general description. The appraisal system resulting from this research is complex in the detail of its design and use. However, the major concepts which are reflected by the system are simple. The purpose of this report is to establish clearly these major concepts and the manner in which the system applies these concepts. Many details, refinements, and caveats are purposefully suppressed in order to provide this general description. While this suppression is a loss to some readers, it is a benefit to a wider spectrum of readers. Those interested in the nuts and bolts of the system will also want to read the user's manual which accompanies this general description

76 FR 75894 - Information Collection Activities: Pipelines and Pipeline Rights-of-Way; Submitted for Office of...

Science.gov (United States)

2011-12-05

...) Submit repair report 3 1008(f) Submit report of pipeline failure analysis...... 30 1008(g) Submit plan of... usual and customary business practice; required burden is minimal to make available to BSEE. Estimated... and provide your total capital and startup cost components or annual operation, maintenance, and...

Main: Clone Detail [KOME

Lifescience Database Archive (English)

Full Text Available Clone Detail Mapping Pseudomolecule data detail Detail information Mapping to the T...IGR japonica Pseudomolecules kome_mapping_pseudomolecule_data_detail.zip kome_mapping_pseudomolecule_data_detail ...

Author Details

African Journals Online (AJOL)

PROMOTING ACCESS TO AFRICAN RESEARCH. AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES. Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads.

The International Classification of Functioning, Disability and Health: a unifying model for the conceptual description of physical and rehabilitation medicine.

Science.gov (United States)

Stucki, Gerold; Melvin, John

2007-05-01

There is a need to develop a contemporary and internationally accepted conceptual description of physical and rehabilitation medicine (PRM). The process of evolving such a definition can now rely on the unifying conceptual model and taxonomy of the International Classification of Functioning, Disability and Health (ICF) and an ICF-based conceptual description of rehabilitation understood as a health strategy. The PRM section of the European Union of Medical Specialists (UEMS) has endorsed the application of the ICF as a unifying conceptual model for PRM and supports the process of moving towards an "ICF-based conceptual description and according definitions of PRM". With this goal in mind, the authors have developed a first tentative conceptual description in co-operation with the professional practice committee of the UEMS-PRM-section. A respective brief definition describes PRM as the medical specialty that, based on the assessment of functioning and including the diagnosis and treatment of health conditions, performs, applies and co-ordinates biomedical and engineering and a wide range of other interventions with the goal of optimizing functioning of people experiencing or likely to experience disability. Readers of the Journal of Rehabilitation Medicine are invited to contribute to the process of achieving an internationally accepted ICF-based conceptual description of PRM by submitting commentaries to the Editor of this journal.

Advanced Transport Operating System (ATOPS) color displays software description microprocessor system

Science.gov (United States)

Slominski, Christopher J.; Plyler, Valerie E.; Dickson, Richard W.

1992-01-01

This document describes the software created for the Sperry Microprocessor Color Display System used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global reference section includes procedures and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight cathode ray tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.

24 CFR 3282.354 - Submittal of false information or refusal to submit information.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false Submittal of false information or... ENFORCEMENT REGULATIONS Primary Inspection Agencies § 3282.354 Submittal of false information or refusal to submit information. The submittal of false information or the refusal to submit information required...

27 CFR 73.34 - When is an electronically submitted form considered timely filed?

Science.gov (United States)

2010-04-01

... AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Filing of Documents with TTB § 73.34 When is an electronically submitted form considered timely filed? If you submit a form to our electronic...

The PHMC algorithm for simulations of dynamical fermions; 1, description and properties

CERN Document Server

Frezzotti, R

1999-01-01

We give a detailed description of the so-called Polynomial Hybrid Monte Carlo (PHMC) algorithm. The effects of the correction factor, which is introduced to render the algorithm exact, are discussed, stressing their relevance for the statistical fluctuations and (almost) zero mode contributions to physical observables. We also investigate rounding-error effects and propose several ways to reduce memory requirements.

7 CFR 28.954 - Costs of submitting samples.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Costs of submitting samples. 28.954 Section 28.954 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER...

A contribution to the systematics of Australasian Tanytarsini (Diptera: Chironomidae): first descriptions from New Caledonia.

Science.gov (United States)

Giłka, Wojciech; Dobosz, Roland

2015-06-26

First specific records of chironomids of the tribe Tanytarsini from New Caledonia based on detailed descriptions of new species are presented. Cladotanytarsus (Cladotanytarsus) stylifer sp. nov. and its closest relatives, i.a. Cladotanytarsus (C.) isigacedeus (Sasa et Suzuki, 2000), comb. nov., known from males bearing extraordinarily elongate hypopygial anal points are diagnosed. Paratanytarsus mirificus sp. nov. is described as adult male with unique structure of its hypopygium and shortened antennae. Diagnostic description of Tanytarsus fuscithorax Skuse, 1889 is also complemented.

Description of the larvae of Hydroporus ferrugineus Stephens and H-polaris fall (Coleoptera: Adephaga: Dytiscidae)

NARCIS (Netherlands)

Alarie, Y.; Wood, P.J.; Bruyn, de A.M.H.; Cuppen, J.G.M.

2001-01-01

Description of structures of the larvae of Hydroporus ferrugineus Stephens and H. polaris Fall is provided including detailed chaetotaxal and porotaxal analyses. Larvae of H. ferrugineus are distinguished from all other species of Hydroporus Clairville by the presence of 1–2 secondary setae on

Revisiting the description of Protein-Protein interfaces. Part II: Experimental study

OpenAIRE

Cazals , Frédéric; Proust , Flavien

2006-01-01

This paper provides a detailed experimental study of an interface model developed in the companion article F. Cazals and F. Proust, Revisiting the description of Protein-Protein interfaces. Part I: algorithms. Our experimental study is concerned with the usual database of protein-protein complexes, split into five families (Proteases, Immune system, Enzyme Complexes, Signal transduction, Misc.) Our findings, which bear some contradictions with usual statements are the following: (i)Connectivi...

Author Details

African Journals Online (AJOL)

An Overview of Africa's Marine Resources: Their Utilization and Sustainable Management Details · Vol 12, No 3 (2000) - Articles EDITORIAL Ganoderma Lucidum - Paramount among Medicinal Mushrooms. Details · Vol 15, No 3 (2003) - Articles Editorial: Africa's Mushrooms: A neglected bioresource whose time has come

Eyewitness Suggestibility and Source Similarity: Intrusions of Details from One Event into Memory Reports of Another Event

Science.gov (United States)

Lindsay, D. Stephen; Allen, Bem P.; Chan, Jason C. K.; Dahl, Leora C.

2004-01-01

We explored the effect of the degree of conceptual similarity between a witnessed event and an extra-event narrative on eyewitness suggestibility. Experiments 1A and 1B replicated Allen and Lindsay's (1998) finding that subjects sometimes intrude details from a narrative description of one event into their reports of a different visual event.…

Distinguishing Features and Similarities Between Descriptive Phenomenological and Qualitative Description Research.

Science.gov (United States)

Willis, Danny G; Sullivan-Bolyai, Susan; Knafl, Kathleen; Cohen, Marlene Z

2016-09-01

Scholars who research phenomena of concern to the discipline of nursing are challenged with making wise choices about different qualitative research approaches. Ultimately, they want to choose an approach that is best suited to answer their research questions. Such choices are predicated on having made distinctions between qualitative methodology, methods, and analytic frames. In this article, we distinguish two qualitative research approaches widely used for descriptive studies: descriptive phenomenological and qualitative description. Providing a clear basis that highlights the distinguishing features and similarities between descriptive phenomenological and qualitative description research will help students and researchers make more informed choices in deciding upon the most appropriate methodology in qualitative research. We orient the reader to distinguishing features and similarities associated with each approach and the kinds of research questions descriptive phenomenological and qualitative description research address. © The Author(s) 2016.

A simplified description of the three-dimensional structure of agroforestry trees for use with a radiative transfer model

International Nuclear Information System (INIS)

Meloni, S.

1998-01-01

To simulate transmitted radiation in agroforestry systems, radiative transfer models usually require a detailed three-dimensional description of the tree canopy. We propose here a simplification of the description of the three-dimensional structure of wild cherry trees (Prunus avium). The simplified tree description was tested against the detailed one for five-year-old wild cherry. It allowed accurate simulation of transmitted radiation and avoided tedious measurements of tree structure. The simplified description was then applied to older trees. Allometric relationships were used to compute the parameters not available on free-grown trees. The transmitted radiation in an agroforestry system was simulated at four different ages: 5, 10, 15 and 20 years. The trees were planted on a 5 m square grid. Two row orientations, chosen to provide different transmitted radiation patterns, were tested: north/south and north- east/south-west. The simulations showed that the daily mean transmitted radiation was reduced from 92% of incident radiation under five-year-old trees to 37% under 20-year-old trees. The variability of transmitted radiation increased with tree growth. The row orientation had only small effects on the shaded area at the beginning and end of the day when solar elevation was low. (author)

Financial analysis of diabetic patients hospitalizations submitted to lower limb amputation in a public hospital

Directory of Open Access Journals (Sweden)

Renata Santos Silva

2015-03-01

Full Text Available This study is a documental descriptive analysis which aimed to verify the cost established in 2006, in relation to the hospitalization of 21 diabetic patients submitted to the lower limb amputation in a public hospital and the value transferred by the Unified Health System (SUS regarding this procedure. Among the studied patients, 57.14% were female and 42.86% male, aged 40 to 90 years. The time of diagnosis varied from 5 to 25 years. The average of hospitalization was 14 days per patient. The cost to the hospital was R$ 99,455.74, average cost per patient was R$ 4,735.98. The total amount transferred by SUS to the hospital was R$ 27,740.15, a cost 3.6 times lower than the hospital costs. The SUS transferring is in accordance with the predetermined values for its table of procedure. Prevention is the only alternative to reduce the rate of amputation and improve survival of diabetes patients. It is necessary an early diagnosis and better control of diabetes mellitus with appropriate government and institutional policies.

Author Details

African Journals Online (AJOL)

Petrology of the Cenomanian Upper Member of the Mamfe Embayment, southwestern Cameroon Details · Vol 38, No 1 (2002) - Articles Sequence stratigraphy of Iso field, western onshore Niger Delta, Nigeria Details · Vol 39, No 2 (2003) - Articles Preliminary studies on the lithostratigraphy and depositional environment of ...

49 CFR 655.49 - Refusal to submit to a drug or alcohol test.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Refusal to submit to a drug or alcohol test. 655... TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PREVENTION OF ALCOHOL MISUSE AND PROHIBITED DRUG USE IN TRANSIT OPERATIONS Types of Testing § 655.49 Refusal to submit to a drug or alcohol test. (a) Each...

Wooden houses in detail. Holzhaeuser im Detail

Energy Technology Data Exchange (ETDEWEB)

Ruske, W. (ed.)

1986-01-01

Under the serial title 'Planning and construction of wooden houses', WEKA will publish a number of books of which this is the first. Details of design and construction are presented, e.g.: Details of modern one-family houses; Fundamentals of design and hints for planning of wooden houses and compact wooden structures; Constructional ecology, wood protection, thermal insulation, sound insulation; Modular systems for domestic buildings; The 'bookshelf-type' house at the Berlin International Construction Exhibition (IBA); Experience with do-it-yourself systems. With 439 figs.

A detailed and verified wind resource atlas for Denmark

Energy Technology Data Exchange (ETDEWEB)

Mortensen, N G; Landberg, L; Rathmann, O; Nielsen, M N [Risoe National Lab., Roskilde (Denmark); Nielsen, P [Energy and Environmental Data, Aalberg (Denmark)

1999-03-01

A detailed and reliable wind resource atlas covering the entire land area of Denmark has been established. Key words of the methodology are wind atlas analysis, interpolation of wind atlas data sets, automated generation of digital terrain descriptions and modelling of local wind climates. The atlas contains wind speed and direction distributions, as well as mean energy densities of the wind, for 12 sectors and four heights above ground level: 25, 45, 70 and 100 m. The spatial resolution is 200 meters in the horizontal. The atlas has been verified by comparison with actual wind turbine power productions from over 1200 turbines. More than 80% of these turbines were predicted to within 10%. The atlas will become available on CD-ROM and on the Internet. (au)

Systems Biology Graphical Notation: Process Description language Level 1 Version 1.3.

Science.gov (United States)

Moodie, Stuart; Le Novère, Nicolas; Demir, Emek; Mi, Huaiyu; Villéger, Alice

2015-09-04

The Systems Biological Graphical Notation (SBGN) is an international community effort for standardized graphical representations of biological pathways and networks. The goal of SBGN is to provide unambiguous pathway and network maps for readers with different scientific backgrounds as well as to support efficient and accurate exchange of biological knowledge between different research communities, industry, and other players in systems biology. Three SBGN languages, Process Description (PD), Entity Relationship (ER) and Activity Flow (AF), allow for the representation of different aspects of biological and biochemical systems at different levels of detail. The SBGN Process Description language represents biological entities and processes between these entities within a network. SBGN PD focuses on the mechanistic description and temporal dependencies of biological interactions and transformations. The nodes (elements) are split into entity nodes describing, e.g., metabolites, proteins, genes and complexes, and process nodes describing, e.g., reactions and associations. The edges (connections) provide descriptions of relationships (or influences) between the nodes, such as consumption, production, stimulation and inhibition. Among all three languages of SBGN, PD is the closest to metabolic and regulatory pathways in biological literature and textbooks, but its well-defined semantics offer a superior precision in expressing biological knowledge.

A Fundamental Scale of Descriptions for Analyzing Information Content of Communication Systems

Directory of Open Access Journals (Sweden)

Gerardo Febres

2015-03-01

Full Text Available The complexity of the description of a system is a function of the entropy of its symbolic description. Prior to computing the entropy of the system’s description, an observation scale has to be assumed. In texts written in artificial and natural languages, typical scales are binary, characters, and words. However, considering languages as structures built around certain preconceived set of symbols, like words or characters, limits the level of complexity that can be revealed analytically. This study introduces the notion of the fundamental description scale to analyze the essence of the structure of a language. The concept of Fundamental Scale is tested for English and musical instrument digital interface (MIDI music texts using an algorithm developed to split a text in a collection of sets of symbols that minimizes the observed entropy of the system. This Fundamental Scale reflects more details of the complexity of the language than using bits, characters or words. Results show that this Fundamental Scale allows to compare completely different languages, such as English and MIDI coded music regarding its structural entropy. This comparative power facilitates the study of the complexity of the structure of different communication systems.

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Singh, J. Vol 3, No 2 (2011) - Articles Plane waves in a rotating generalized thermo-elastic solid with voids. Abstract PDF. ISSN: 2141-2839. AJOL African Journals Online. HOW TO USE AJOL.

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Vol 12 (2008) - Articles On the wave equations of shallow water with rough bottom topography. Abstract · Vol 14 (2009) - Articles Energy generation in a plant due to variable sunlight intensity

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Vol 45 (2016) - Articles From vectors to waves and streams: An alternative approach to semantic maps1. Abstract PDF · Vol 48 (2017) - Articles Introduction: 'n Klein ietsie for Johan Oosthuizen

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... to blast loadings. Abstract PDF · Vol 9, No 3S (2017): Special Issue - Articles Experimental and numerical investigation on blast wave propagation in soil structure. Abstract PDF. ISSN: 1112-9867.

Infection by Cryptosporidium parvum in renal patients submitted to renal transplant or hemodialysis

Directory of Open Access Journals (Sweden)

Chieffi Pedro Paulo

1998-01-01

Full Text Available The frequency of infection by Cryptosporidium parvum was determined in two groups of renal patients submitted to immunosuppression. One group consisted of 23 renal transplanted individuals, and the other consisted of 32 patients with chronic renal insufficiency, periodically submitted to hemodialysis. A third group of 27 patients with systemic arterial hypertension, not immunosuppressed, was used as control. During a period of 18 months all the patients were submitted to faecal examination to detect C. parvum oocysts, for a total of 1 to 6 tests per patient. The results showed frequencies of C. parvum infection of 34.8%, 25% and 17.4%, respectively, for the renal transplanted group, the patients submitted to hemodialysis and the control group. Statistical analysis showed no significant differences among the three groups even though the frequency of C. parvum infection was higher in the transplanted group. However, when the number of fecal samples containing C. parvum oocysts was taken in account, a significantly higher frequency was found in the renal transplanted group.

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Iliopsoas haematoma in a rugby player. Abstract PDF · Vol 29, No 1 (2017) - Articles The use of negative pressure wave treatment in athlete recovery. Abstract PDF. ISSN: 2078-516X. AJOL African ...

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... No 3S (2017): Special Issue - Articles Experimental and numerical investigation on blast wave propagation in soil structure. Abstract PDF · Vol 9, No 3S (2017): Special Issue - Articles Simulation on ...

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Duwa, S S. Vol 8 (2004) - Articles Lower hybrid waves instability in a velocity–sheared inhomogenous charged dust beam. Abstract · Vol 9 (2005) - Articles The slide away theory of lower hybrid bursts

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... The use of negative pressure wave treatment in athlete recovery. Abstract PDF · Vol 29, No 1 (2017) - Articles The prevalence, risk factors predicting injury and the severity of injuries sustained during ...

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Vol 29, No 1 (2017) - Articles The use of negative pressure wave treatment in athlete recovery. Abstract PDF · Vol 29, No 1 (2017) - Articles The prevalence, risk factors predicting injury and the ...

Acceptance Testing Of Web Applications With Test Description Language

Directory of Open Access Journals (Sweden)

Łukasz Olek

2014-01-01

Full Text Available Acceptance tests are usually created by a client after a part of a system is implemented. However, some methodologies propose the elaboration of test cases before implementing a system. This approach increases the probability of system implementation that fulfills requirements, but may be problematic for customers and testers. To allow acceptance testing in such conditions, we propose to define test cases by recording them on an interactive mockup (a low detailed user-interface prototype. The paper focuses on Test Description Language, a notation used to store test cases.

Molecular Epidemiology of Entamoeba: First Description of Entamoeba moshkovskii in a Rural Area from Central Colombia.

Directory of Open Access Journals (Sweden)

Myriam Consuelo López

Full Text Available Entamoeba histolytica, E. dispar and E. moshkovskii are the most frequent species described in human infection where E. histolytica is the only true pathogen. The epidemiology of this infection is complex due to the absence of a routine exam that allows a correct discrimination of the Entamoeba species complex. Therefore, molecular methods appear as the unique epidemiological tool to accomplish the species discrimination. Herein, we conducted a cross-sectional study to determine the frequency of Entamoeba species infections in a group of asymptomatic individuals from a rural area in central Colombia.A total of 181 fecal samples from asymptomatic children under 16 years old from the hamlet La Vírgen, Cundinamarca (Colombia that voluntarily accepted to participate in the study were collected. The fecal samples were examined by light microscopy and DNA-extracted, subsequently submitted to molecular discrimination of E. dispar/E. histolytica/E. moshkovskii infection based on a multiplex PCR assay targeting the 18S rRNA fragment. To confirm the species description, twenty samples were randomly submitted to DNA sequencing of the aforementioned fragment. By direct microscopic examination, frequency of the complex E. histolytica/E. dispar/E. moshkovskii was 18.8% (34/181. PCR showed a frequency of 49.1% (89/181, discriminated as 23.2% (42/181 that were positive for E. dispar, 25.4% (46/181 for E. moshkovskii and 0.55% (1/ 181 for E. histolytica. Also, mixed infections were detected between E. dispar and E. moshkovskii at 4.42% (8/181 of the samples. Molecular barcoding confirmed the diagnosis depicted by the multiplex PCR assay.This is the first description of E. moshkovskii in Colombia and the second report in South-America to our knowledge. Our results suggest the need to unravel the true epidemiology of Entamoeba infections around the world, including the real pathogenic role that E. moshkovskii may have.

A consistent meson-theoretic description of the NN-interaction

International Nuclear Information System (INIS)

Machleidt, R.

1985-01-01

In this paper, the meson-theory of the NN-interaction is performed consistently. All irreducible diagrams up to a total exchanged mass of about 1 GeV (i. e. up to the cutoff region) are taken into account. These diagrams contain in particular an explicit field theoretic model for the 2π-exchange taking into account virtual Δ-excitation and direct π π-interaction. This part of the model agrees quantitatively with results obtained from dispersion theory which in turn are based on the analysis of πN- and π π-scattering data. A detailed description of the lower partial wave phase-shifts of NN-scattering requires the introduction of irreducible diagrams containing also heavy boson exchange, in particular the combination of π and rho. In the framework of this consistent meson theory an accurate description of the NN-scattering data below 300 MeV laboratory energy as well as the deuteron data is achieved; the numerical results are superior to those of simplified boson exchange models

Rock Visualization System. Technical description (RVS version 3.8)

International Nuclear Information System (INIS)

Curtis, P.; Elfstroem, M.; Markstroem, I.

2007-06-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 4.0. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carry out a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system

Rock Visualization System. Technical description (RVS version 3.8)

Energy Technology Data Exchange (ETDEWEB)

Curtis, P.; Elfstroem, M.; Markstroem, I. [FB Engineering, Goeteborg (Sweden)

2005-04-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 3.8. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

Rock Visualization System. Technical description (RVS version 3.8)

Energy Technology Data Exchange (ETDEWEB)

Curtis, P.; Elfstroem, M.; Markstroem, I. [Golder Associates AB (Sweden)

2007-06-15

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 4.0. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carry out a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

Rock Visualization System. Technical description (RVS version 3.8)

International Nuclear Information System (INIS)

Curtis, P.; Elfstroem, M.; Markstroem, I.

2005-04-01

The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 3.8. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system

18 CFR 344.2 - Manner of submitting quotations.

Science.gov (United States)

2010-04-01

... quotations. 344.2 Section 344.2 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY COMMISSION, DEPARTMENT OF ENERGY REGULATIONS UNDER THE INTERSTATE COMMERCE ACT FILING QUOTATIONS FOR U.S. GOVERNMENT SHIPMENTS AT REDUCED RATES § 344.2 Manner of submitting quotations. (a) The quotation or tender...

Analysis of suspected wildlife crimes submitted for forensic examinations in Scotland.

Science.gov (United States)

Millins, Caroline; Howie, Fiona; Everitt, Charles; Shand, Michael; Lamm, Catherine

2014-09-01

This study describes the occurrence of suspected wildlife crimes submitted for forensic examination in Scotland in 2010. The study aims were to determine which types of crimes were committed, which species were targeted, and the outcome of investigations, in order to assess the contribution of forensic examinations in the prosecution of wildlife crimes. Information on suspected wildlife crimes submitted between January 1 and December 31, 2010 to the SAC Consulting: Veterinary Services Disease Surveillance Centers, Science and Advice for Scottish Agriculture, and to the University of Glasgow, was used. The location of suspected crimes, the species targeted, cause of death, and types of the 188 submitted wildlife crimes were summarized. More information regarding cases involving birds were submitted than cases involving mammals, and included 114 raptors, 14 waterfowl, and 22 "other bird species." Mammal cases (n = 38) included 12 badgers, 8 foxes, 7 deer, 4 hares, and 7 "other mammals." The cause of death was determined in 124 suspected crimes; malicious or accidental trauma was the most likely cause of death in 72, and 33 were poisoned. Forensic evidence supporting criminal activity was found in 53 cases, and poisoning was the most frequent crime recorded. At least five individuals were successfully prosecuted, representing 2.7 % of submissions. It was challenging to track cases from submission through to prosecution and laboratories conducting forensic investigations were often not informed of the outcome of prosecutions or court decisions.

Baseline process description for simulating plutonium oxide production for precalc project

Energy Technology Data Exchange (ETDEWEB)

Pike, J. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-10-26

Savannah River National Laboratory (SRNL) started a multi-year project, the PreCalc Project, to develop a computational simulation of a plutonium oxide (PuO₂) production facility with the objective to study the fundamental relationships between morphological and physicochemical properties. This report provides a detailed baseline process description to be used by SRNL personnel and collaborators to facilitate the initial design and construction of the simulation. The PreCalc Project team selected the HB-Line Plutonium Finishing Facility as the basis for a nominal baseline process since the facility is operational and significant model validation data can be obtained. The process boundary as well as process and facility design details necessary for multi-scale, multi-physics models are provided.

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Isa, M.F.M.. Vol 9, No 3S (2017): Special Issue - Articles Experimental and numerical investigation on blast wave propagation in soil structure. Abstract PDF · Vol 9, No 3S (2017): Special Issue - ...

Electric energy supply systems: description of available technologies

Energy Technology Data Exchange (ETDEWEB)

Eisenhauer, J.L.; Rogers, E.A.; King, J.C.; Stegen, G.E.; Dowis, W.J.

1985-02-01

When comparing coal transportation with electric transmission as a means of delivering electric power, it is desirable to compare entire energy systems rather than just the transportation/transmission components because the requirements of each option may affect the requirements of other energy system components. PNL's assessment consists of two parts. The first part, which is the subject of this document, is a detailed description of the technical, cost, resource and environmental characteristics of each system component and technologies available for these components. The second part is a computer-based model that PNL has developed to simulate construction and operation of alternative system configurations and to compare the performance of these systems under a variety of economic and technical conditions. This document consists of six chapters and two appendices. A more thorough description of coal-based electric energy systems is presented in the Introduction and Chapter 1. Each of the subsequent chapters describes technologies for five system components: Western coal resources (Chapter 2), coal transportation (Chapter 3), coal gasification and gas transmission (Chapter 4), and electric power transmission (Chapter 6).

Arterial hypertension and associated factors in patients submitted to myocardial revascularization

Directory of Open Access Journals (Sweden)

Flávia Cortez Colósimo

2015-04-01

Full Text Available OBJECTIVE To identify the prevalence of arterial hypertension and associated factors in patients submitted to myocardial revascularization. METHOD Cross-sectional study using the database of a hospital in São Paulo (SP, Brazil containing 3010 patients with coronary artery disease submitted to myocardial revascularization. A multiple logistic regression was performed to identify variables independently associated with hypertension (statistical significance: p1.3: (OR=1.37;CI:1.09-1.72. CONCLUSION A high prevalence of arterial hypertension and association with both non-modifiable and modifiable factors was observed.

Stress analysis in pipelines submitted to internal pressure - and temperature transients

International Nuclear Information System (INIS)

Mansur, T.R.

1981-08-01

Experimental determination of the structural behaviour of a thermal-hydraulic loop, when submitted to simultaneous fast change of pressure and temperature, was performed. For this, electrical strain-gages were positioned at some critical points in order to measure the deformation conditions of the structure. The study of the kinetics of the deformation revealed the presence of important transient stresses, mainly from thermal origin. After this transient behaviour, the structure is submitted to a thermal stress, which is shown to be strongly dependent on the degree of restraint of the structure. (Author) [pt

The chemical component dictionary: complete descriptions of constituent molecules in experimentally determined 3D macromolecules in the Protein Data Bank

OpenAIRE

Westbrook, John D.; Shao, Chenghua; Feng, Zukang; Zhuravleva, Marina; Velankar, Sameer; Young, Jasmine

2014-01-01

Summary: The Chemical Component Dictionary (CCD) is a chemical reference data resource that describes all residue and small molecule components found in Protein Data Bank (PDB) entries. The CCD contains detailed chemical descriptions for standard and modified amino acids/nucleotides, small molecule ligands and solvent molecules. Each chemical definition includes descriptions of chemical properties such as stereochemical assignments, chemical descriptors, systematic chemical names and idealize...

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Abstract PDF · Vol 3, No 6 (2011) - Articles Mixed convection flow and heat transfer in a vertical wavy channel containing porous and fluid layer with traveling thermal waves. Abstract PDF · Vol 3, No 8 ...

Author Details

African Journals Online (AJOL)

Author Details. Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Ismail, A. Vol 9, No 3S (2017): Special Issue - Articles Investigate of wave absorption performance for oil palm frond and empty fruit bunch at 5.8 GHz. Abstract PDF · Vol 9, No 3S (2017): Special Issue ...

Advanced Transport Operating System (ATOPS) color displays software description: MicroVAX system

Science.gov (United States)

Slominski, Christopher J.; Plyler, Valerie E.; Dickson, Richard W.

1992-01-01

This document describes the software created for the Display MicroVAX computer used for the Advanced Transport Operating Systems (ATOPS) project on the Transport Systems Research Vehicle (TSRV). The software delivery of February 27, 1991, known as the 'baseline display system', is the one described in this document. Throughout this publication, module descriptions are presented in a standardized format which contains module purpose, calling sequence, detailed description, and global references. The global references section includes subroutines, functions, and common variables referenced by a particular module. The system described supports the Research Flight Deck (RFD) of the TSRV. The RFD contains eight Cathode Ray Tubes (CRTs) which depict a Primary Flight Display, Navigation Display, System Warning Display, Takeoff Performance Monitoring System Display, and Engine Display.

Template for safety reports with descriptive example

International Nuclear Information System (INIS)

1995-12-01

This report provides a template for future safety reports on long-term safety in support of important decisions and permit applications in connection with the construction of a deep repository system. The template aims at providing a uniform structure for describing long-term safety, after the repository has been closed and sealed. The availability of such a structure will simplify both preparation and review of the safety reports, and make it possible to follow how safety assessments are influenced by the progressively more detailed body of data that emerges. A separate section containing 'descriptive examples' has been appended to the template. This section illustrates what the different chapters of the template should contain. 279 refs

Template for safety reports with descriptive example

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-01

This report provides a template for future safety reports on long-term safety in support of important decisions and permit applications in connection with the construction of a deep repository system. The template aims at providing a uniform structure for describing long-term safety, after the repository has been closed and sealed. The availability of such a structure will simplify both preparation and review of the safety reports, and make it possible to follow how safety assessments are influenced by the progressively more detailed body of data that emerges. A separate section containing `descriptive examples` has been appended to the template. This section illustrates what the different chapters of the template should contain. 279 refs.

GIS-assisted spatial analysis for urban regulatory detailed planning: designer's dimension in the Chinese code system

Science.gov (United States)

Yu, Yang; Zeng, Zheng

2009-10-01

By discussing the causes behind the high amendments ratio in the implementation of urban regulatory detailed plans in China despite its law-ensured status, the study aims to reconcile conflict between the legal authority of regulatory detailed planning and the insufficient scientific support in its decision-making and compilation by introducing into the process spatial analysis based on GIS technology and 3D modeling thus present a more scientific and flexible approach to regulatory detailed planning in China. The study first points out that the current compilation process of urban regulatory detailed plan in China employs mainly an empirical approach which renders it constantly subjected to amendments; the study then discusses the need and current utilization of GIS in the Chinese system and proposes the framework of a GIS-assisted 3D spatial analysis process from the designer's perspective which can be regarded as an alternating processes between the descriptive codes and physical design in the compilation of regulatory detailed planning. With a case study of the processes and results from the application of the framework, the paper concludes that the proposed framework can be an effective instrument which provides more rationality, flexibility and thus more efficiency to the compilation and decision-making process of urban regulatory detailed plan in China.

17 CFR 145.9 - Petition for confidential treatment of information submitted to the Commission.

Science.gov (United States)

2010-04-01

... may summarily reject the submitter's request for confidential treatment with leave to the submitter to... treatment of information submitted to the Commission. 145.9 Section 145.9 Commodity and Securities Exchanges... treatment of information submitted to the Commission. (a) Purpose. This section provides a procedure by...

78 FR 63501 - Request To Submit a Two-Part Application-Northwest Medical Isotopes, LLC

Science.gov (United States)

2013-10-24

... new accident precursors are created by allowing an applicant to submit a construction permit... certain regulatory requirements, which, if granted, would allow the submittal of a construction permit... facility applicants subject to 10 CFR 51.20(b) \\1\\ may submit the information required for a construction...

A taxonomic review of the genus Horniolus Weise from China, with description of a new species (Coleoptera, Coccinellidae

Directory of Open Access Journals (Sweden)

Xiaosheng Chen

2016-10-01

Full Text Available Five species of the genus Horniolus Weise, 1901 from China are revised, including the description of a new species, Horniolus hainanensis Chen & Ren, sp. n. Horniolus sonduongensis Hoàng, 1979 is reported from China for the first time. A key to the species from China is provided. Nomenclatural history, diagnoses, detailed descriptions, illustrations, and distribution for each species have been provided. A checklist of all known species of this genus is also presented.

[Histopathological analysis of organs submitted by legal medicine experts in Baojii City: 358 forensic identification cases].

Science.gov (United States)

Dong, Du-xuan; Shi, Ping-xia; Li, Yun-li; Tian, San-hu; Yang, Jia; Gao, Gang; Zheng, Yun; Jia, Le; Ju, Hong-ya; Sun, Lu-ying; Chen, Ni; Wang, Xiao-bao

2014-08-01

To analyze pathological characteristics of organs recovered during forensic autopsy submitted by legal medicine experts. From Baoji city, 358 cases of forensic autopsy specimens from a series of routine exams were collected. And histopathological diagnoses were reviewed. Majority of the 358 cases were young men. The major causes of death were trauma, sudden death and poisoning. The cause of death was determined with histology in 250 cases. No typical histological changes were noted in 101 cases. The tissue autolysis and decomposition were present in 7 cases. The major pathological diagnosis was cardiovascular disease, followed by diseases in respiratory, nervous, and digestive systems. Forensic autopsy with its professional characteristics, is different from regular autopsy. When diagnosing cause of death by histopathological examination, pathologists should collaborate with legal medicine experts to know the details of the cases, circumstances surrounding the death, and specific forensic pathological characteristics.

On the limits of the effective description of hyperbolic materials in the presence of surface waves

International Nuclear Information System (INIS)

Tschikin, Maria; Biehs, Svend-Age; Messina, Riccardo; Ben-Abdallah, Philippe

2013-01-01

Here, we address the question of the validity of an effective description for hyperbolic metamaterials in the near-field region. We show that the presence of localized modes such as surface waves drastically limits the validity of the effective description, and requires revisiting the concept of homogenization in the near-field. We demonstrate, from exact scattering matrix calculations for multilayer hyperbolic structures, that one can find surface modes in spectral regions where the effective approach predicts hyperbolic modes only. Hence, the presence of surface modes which are not accounted for in the effective description can lead to physical misinterpretations in the description of hyperbolic materials and their related properties. In particular, we discuss in detail how the choice of the topmost layer affects the validity of the effective medium approach for calculating the local density of states and the super-Planckian thermal radiation. (paper)

(How) does sectoral detail affect the robustness of policy insights from energy system models? The refining sector's example

International Nuclear Information System (INIS)

Nicolas, Claire; Saint-Antonin, Valerie; Tchung-Ming, Stephane

2014-01-01

In this research, we rekindle an old debate by questioning the impact on mitigating policy evaluation of detailing a sub-sector in a global energy-transportation model. We chose the refining sector because it is a relevant case of a sector for which representation widely differs across models and because it offers a unique set of complex joint production in the energy sector. To investigate whether the level of detail in the description of the refinery impacts optimal mitigation options, we take the example of a long-term, national, linear programming based, energy-transport system model (TIMES based). We found that the refinery description used in the energy system model matters when trying to evaluate energy or climate policy applied to the transportation sector. It impacts the policy costs but also the technology trajectories chosen at the optimum. Essentially, the balance between energy efficiency and carbon intensity of transport may be affected by the accuracy of the description of the pivotal refining sector. Consequently, increasing this sector accuracy level should not only be motivated by the wish to gain wider quantitative insights on potential evolution of the energy system but also by the wish to improve the robustness of the model outcomes. (authors)

Dynamical twisted mass fermions with light quarks. Simulation and analysis details

Energy Technology Data Exchange (ETDEWEB)

Boucaud, P. [Paris-11 Univ., 91 - Orsay (France). Lab. de Physique Theorique; Dimopoulos, P. [Rome-2 Univ. (Italy). Dipt. di Fisica; Farchioni, F. [Muenster Univ. (DE). Inst. fuer Theoretische Physik] (and others)

2008-03-15

In a recent paper (2007) we presented precise lattice QCD results of our European Twisted Mass Collaboration (ETMC). They were obtained by employing two mass-degenerate flavours of twisted mass fermions at maximal twist. In the present paper we give details on our simulations and the computation of physical observables. In particular, we discuss the problem of tuning to maximal twist, the techniques we have used to compute correlators and error estimates. In addition, we provide more information on the algorithm used, the autocorrelation times and scale determination, the evaluation of disconnected contributions and the description of our data by means of chiral perturbation theory formulae. (orig.)

Dynamical twisted mass fermions with light quarks. Simulation and analysis details

International Nuclear Information System (INIS)

Boucaud, P.; Dimopoulos, P.; Farchioni, F.

2008-03-01

In a recent paper (2007) we presented precise lattice QCD results of our European Twisted Mass Collaboration (ETMC). They were obtained by employing two mass-degenerate flavours of twisted mass fermions at maximal twist. In the present paper we give details on our simulations and the computation of physical observables. In particular, we discuss the problem of tuning to maximal twist, the techniques we have used to compute correlators and error estimates. In addition, we provide more information on the algorithm used, the autocorrelation times and scale determination, the evaluation of disconnected contributions and the description of our data by means of chiral perturbation theory formulae. (orig.)

Memory's aging echo: age-related decline in neural reactivation of perceptual details during recollection.

Science.gov (United States)

McDonough, Ian M; Cervantes, Sasha N; Gray, Stephen J; Gallo, David A

2014-09-01

Episodic memory decline is a hallmark of normal cognitive aging. Here, we report the first event-related fMRI study to directly investigate age differences in the neural reactivation of qualitatively rich perceptual details during recollection. Younger and older adults studied pictures of complex scenes at different presentation durations along with descriptive verbal labels, and these labels subsequently were used during fMRI scanning to cue picture recollections of varying perceptual detail. As expected from prior behavioral work, the two age groups subjectively rated their recollections as containing similar amounts of perceptual detail, despite objectively measured recollection impairment in older adults. In both age groups, comparisons of retrieval trials that varied in recollected detail revealed robust activity in brain regions previously linked to recollection, including hippocampus and both medial and lateral regions of the prefrontal and posterior parietal cortex. Critically, this analysis also revealed recollection-related activity in visual processing regions that were active in an independent picture-perception task, and these regions showed age-related reductions in activity during recollection that cannot be attributed to age differences in response criteria. These fMRI findings provide new evidence that aging reduces the absolute quantity of perceptual details that are reactivated from memory, and they help to explain why aging reduces the reliability of subjective memory judgments. Copyright © 2014 Elsevier Inc. All rights reserved.

PDDL4J: a planning domain description library for java

Science.gov (United States)

Pellier, D.; Fiorino, H.

2018-01-01

PDDL4J (Planning Domain Description Library for Java) is an open source toolkit for Java cross-platform developers meant (1) to provide state-of-the-art planners based on the Pddl language, and (2) to facilitate research works on new planners. In this article, we present an overview of the Automated Planning concepts and languages. We present some planning systems and their most significant applications. Then, we detail the Pddl4j toolkit with an emphasis on the available informative structures, heuristics and search algorithms.

A re-description of Frillagalma vityazi Daniel 1966 (Siphonophorae, Agalmatidae

Directory of Open Access Journals (Sweden)

P. R. Pugh

1998-09-01

Full Text Available Ten complete specimens of Frillagalma vityazi Daniel, 1966 (Siphonophorae, Agalmatidae were collected by the submersibles Johnson-Sea-Link I and II. These have allowed a more detailed description of the species to be made, as it was previously known only by its ill-preserved nectophores and one type of its bracts. The taxonomic status of the species is discussed. In addition much material has been identified from the Discovery collections, and the distribution of the species in the North Atlantic Ocean is considered.

A description of the PISC project

International Nuclear Information System (INIS)

1979-01-01

This report, written as an historical review of the Plate Inspection Steering Committee project, records the background of the project and refers in general to the reasons why decisions were made during the four years the project has been running. Details are given in further reports, of which the full list, issued by the Commission of the European Communities, is as follows: Report no.1 - A description of the PISC project. Report no.2 - Ultrasonic examination of the PVRC plates nos. 50/52, 51/53 and 204. Report no.3 - Destructive examination of the PVRC plates nos. 50/52, 51/53 and 204. Report no.4 - Analysis scheme of the PISC trials results. Report no.5 - Evaluation of the PISC trials results. A list of all participants is given. Data and results of the test programme are detailed in the other reports above, but to maintain confidentiality of data the individual teams have been allocated a code number known only to the team and the PISC management. Data are only identified against code numbers. A report on conclusions and recommendations of the whole PISC programme will be published by the OECD-Committee on the Safety of Nuclear Installations (CSNI) and presented at its annual meeting 1979

41 CFR 105-50.402 - Reports submitted to the Office of Management and Budget.

Science.gov (United States)

2010-07-01

... Office of Management and Budget. 105-50.402 Section 105-50.402 Public Contracts and Property Management... submitted to the Office of Management and Budget. Copies of the foregoing reports will be submitted by the Administrator to the Office of Management and Budget not later than March 30 of each year. ...

Forsmark - site descriptive model version 0

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-10-01

During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

Final environmental impact statement, Beaufort Sea oil and gas development/Northstar Project. Appendix A: BP Exploration (Alaska) Inc. Final project description - Revision 1, March 27, 1997

International Nuclear Information System (INIS)

1999-02-01

BP Exploration (Alaska) Inc. (BPXA) submitted a permit application to the US Army Engineer District, Alaska to initiate the review process for BPXA's plans to develop and produce oil and gas from the Northstar Unit. This report contains Appendix A of an Environmental Impact Statement which was undertaken to identify and evaluate the potential effects the proposed project may have on the environment. This document is the Northstar Development Project, Final Project Description, Revision 1 for BPXA Northstar Project

20 CFR 703.105 - Copies of forms of policies to be submitted with application.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Copies of forms of policies to be submitted... REGULATIONS Authorization of Insurance Carriers § 703.105 Copies of forms of policies to be submitted with... of the Office copies of the forms of policies which the applicant proposes to issue in writing...

78 FR 76293 - Information Collection Request Submitted to OMB for Review and Approval; Comment Request...

Science.gov (United States)

2013-12-17

... Environmental Protection Agency has submitted an information collection request (ICR), ``Performance Evaluation... ENVIRONMENTAL PROTECTION AGENCY [EPA-HQ-OECA-2013-0547; FRL 9903-29-OEI] Information Collection Request Submitted to OMB for Review and Approval; Comment Request; Performance Evaluation Studies on...

Description of morphologic characters in avocado trees (Persea americana. Mill) var. Hass, submitted to gamma radiation of 60 Co

International Nuclear Information System (INIS)

Sandoval R, L.

2004-01-01

It was carried out the characterization of 77 trees of avocado ''Hass'' subjected to gamma radiation of Co 60 , in doses of 0, 5, 10,15, 20 and 25 Gy based on previous studies of radiosensitivity with ends of improvement located in the experimental center ''La Labor'' belonging to the foundation Salvador Sanchez Colin. CICTAMEX. S C. in Temascaltepec, Mexico. It was carried out the morphological characterization of this variety according to the nomenclature settled down by the International Office of Genetic Resources (IBPGRI), registering 27 variables for the description of the tree, 33 for description of the fruit and 14 for the characterization of the seed. Regarding the architectural characterization 10 variables were evaluated. Using gamma radiation of Co 60 in the doses of 15 and 20 Gy it was detected a reduction of 22% in the portage of the tree, likewise had reduction the diameter of the trunk and of the foliage. It was found that the reduction in the behavior of the tree induces to a bigger variation of the form of the same one, in the distribution of the branches in the form of the fruit and in the form of the seed you Also detects a remarkable increment in the productivity of some hoist irradiated regarding the architecture of the tree one observes that the angle of inclination of the branches increase when being increased the radiation dose and that the longitude of the annual section of growth decreased significantly in the doses of 20 and 25 Gy. One observes a significant Increment in the I number of buds prolepticos in those hoist irradiated in the I finish mbdulo of rhythmic growth. Io that indicates a change substantial in the I inhabit of growth With the purpose of determining if the changes in morphology and architecture of the tree corresponded with the modification at level meristematico, they were carried out observations to the court microscope of having knitted apical vegetative meristematico in samples of you hoist of all the treatments

Supporting Data for FY 1990/1991 Biennial Budget: Budget Estimates Descriptive Summaries Submitted to Congress January 1989, Research, Development, Test & Evaluation, Navy

Science.gov (United States)

1989-01-01

Title: P-3 gpdate IV Avi nics E. (U) COMPARISCN WITH AMENDED FY 1988/1989 DESCRIPTIVE SUHMARY: IMPACT OF CHANGES TYPE OF impact on Impact on Impact on...d. (U) Completed NTU TEMP 547 DT/OT-IIIA testing aboard USS BIDDLE (OG-34). e. (U) Initiated engineering design/development of modifications to...with the Royal and Royal Australian Navies for delivery of OBU under Foreign Military Sales (FMS) provisions. J. (U) TEST AND EVALUATION DATA: NIC /DIA

Memory judgements: the contribution of detail and emotion to assessments of believability and reliability.

Science.gov (United States)

Justice, Lucy V; Smith, Harriet M J

2018-06-06

In legal settings, jury members, police, and legal professionals often have to make judgements about witnesses' or victims' memories of events. Without a scientific understanding of memory, (often erroneous) beliefs are used to make decisions. Evaluation of the literature identified two prevalent beliefs that could influence judgements: (1) memory operates like a video recorder therefore, accounts that are detailed are more believable than those containing vague descriptions, and (2) memories recalled with congruent emotion are more believable than those recalled with incongruent emotion. A 2 (emotionality: emotional, non-emotional) × 2 (detail: high, low) factorial design was generated. In line with previous research, participants made believability judgements (Experiment 1) but uniquely, participants were also asked to judge the reliability of the rememberer's recall (Experiment 2). Self-reported confidence, personality measures, and political orientation were also recorded. Believability judgements did not vary as a function of detail or emotion but detailed accounts were judged as more reliable than vague accounts. Confidence and believability were positively correlated, whereas the confidence-reliability relationship was more complex. Personality and political measures were independent of judgements of both constructs. Our results suggest that believability and reliability are distinct constructs and should be examined as such in future research.

Crowdsourcing detailed flood data

Science.gov (United States)

Walliman, Nicholas; Ogden, Ray; Amouzad*, Shahrzhad

2015-04-01

Over the last decade the average annual loss across the European Union due to flooding has been 4.5bn Euros, but increasingly intense rainfall, as well as population growth, urbanisation and the rising costs of asset replacements, may see this rise to 23bn Euros a year by 2050. Equally disturbing are the profound social costs to individuals, families and communities which in addition to loss of lives include: loss of livelihoods, decreased purchasing and production power, relocation and migration, adverse psychosocial effects, and hindrance of economic growth and development. Flood prediction, management and defence strategies rely on the availability of accurate information and flood modelling. Whilst automated data gathering (by measurement and satellite) of the extent of flooding is already advanced it is least reliable in urban and physically complex geographies where often the need for precise estimation is most acute. Crowdsourced data of actual flood events is a potentially critical component of this allowing improved accuracy in situations and identifying the effects of local landscape and topography where the height of a simple kerb, or discontinuity in a boundary wall can have profound importance. Mobile 'App' based data acquisition using crowdsourcing in critical areas can combine camera records with GPS positional data and time, as well as descriptive data relating to the event. This will automatically produce a dataset, managed in ArcView GIS, with the potential for follow up calls to get more information through structured scripts for each strand. Through this local residents can provide highly detailed information that can be reflected in sophisticated flood protection models and be core to framing urban resilience strategies and optimising the effectiveness of investment. This paper will describe this pioneering approach that will develop flood event data in support of systems that will advance existing approaches such as developed in the in the UK

49 CFR 551.63 - May a foreign manufacturer submit a designation by email or facsimile?

Science.gov (United States)

2010-10-01

... email or facsimile? 551.63 Section 551.63 Transportation Other Regulations Relating to Transportation... foreign manufacturer submit a designation by email or facsimile? No, the statute requires designation... designation documents submitted via email or facsimile, as they do not satisfy this requirement. ...

Forsmark - site descriptive model version 0

International Nuclear Information System (INIS)

2002-10-01

During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

Dosimetry of patients submitted to cerebral PET/CT for the diagnosis of mild cognitive impairment

Energy Technology Data Exchange (ETDEWEB)

Santana, Priscila do Carmo; Oliveira, Paulo Marcio Campos de; Bernardes, Felipe Dias; Mamede, Marcelo, E-mail: pridili@gmail.com [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil); Mourao, Arnaldo Prata [Centro Federal de Educacao Tecnologica de Minas Gerais (CEFET), Belo Horizonte, MG (Brazil); Silva, Teogenes Augusto da [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2014-11-15

Objective: the present study was aimed at evaluating the effective radiation dose in patients submitted to PET/CT for the diagnosis of mild cognitive impairment. Materials and methods: TLD-100 detectors inserted into an Alderson Rando® anthropomorphic phantom were utilized to measure the absorbed dose coming from the CT imaging modality. The anthropomorphic phantoms (male and female adult versions) were submitted to the same technical protocols for patients’ images acquisition. The absorbed dose resulting from the radiopharmaceutical injection was estimated by means of the model proposed by the ICRP publication 106. Results: the effective dose in patients submitted to this diagnostic technique was approximately (5.34 ± 1.99) mSv. Conclusion: optimized protocols for calculation of radioactive activity injected into patients submitted to this diagnostic technique might contribute to reduce the effective radiation dose resulting from PET/CT in the diagnosis of mild cognitive impairment. (author)

Dosimetry of patients submitted to cerebral PET/CT for the diagnosis of mild cognitive impairment

International Nuclear Information System (INIS)

Santana, Priscila do Carmo; Oliveira, Paulo Marcio Campos de; Bernardes, Felipe Dias; Mamede, Marcelo; Mourao, Arnaldo Prata; Silva, Teogenes Augusto da

2014-01-01

Objective: the present study was aimed at evaluating the effective radiation dose in patients submitted to PET/CT for the diagnosis of mild cognitive impairment. Materials and methods: TLD-100 detectors inserted into an Alderson Rando® anthropomorphic phantom were utilized to measure the absorbed dose coming from the CT imaging modality. The anthropomorphic phantoms (male and female adult versions) were submitted to the same technical protocols for patients’ images acquisition. The absorbed dose resulting from the radiopharmaceutical injection was estimated by means of the model proposed by the ICRP publication 106. Results: the effective dose in patients submitted to this diagnostic technique was approximately (5.34 ± 1.99) mSv. Conclusion: optimized protocols for calculation of radioactive activity injected into patients submitted to this diagnostic technique might contribute to reduce the effective radiation dose resulting from PET/CT in the diagnosis of mild cognitive impairment. (author)

Author Details

African Journals Online (AJOL)

Meiotic study of Acrida turrita (Linnaeus 1758), Paracinema luculenta Karsch 1896 and Morphacris fasciata (Thunberg 1815) (Orthoptera: Acrididae) Abstract PDF · Vol 6, No 4 (2012) - Articles Cytogenetic characterization of Taphronota thaelephora Stal. 1873. (Orthoptera: Pyrgomorphidae) from Cameroon. II. Description of ...

Organization model and formalized description of nuclear enterprise information system

International Nuclear Information System (INIS)

Yuan Feng; Song Yafeng; Li Xudong

2012-01-01

Organization model is one of the most important models of Nuclear Enterprise Information System (NEIS). Scientific and reasonable organization model is the prerequisite that NEIS has robustness and extendibility, and is also the foundation of the integration of heterogeneous system. Firstly, the paper describes the conceptual model of the NEIS on ontology chart, which provides a consistent semantic framework of organization. Then it discusses the relations between the concepts in detail. Finally, it gives the formalized description of the organization model of NEIS based on six-tuple array. (authors)

SCRIC: a code dedicated to the detailed emission and absorption of heterogeneous NLTE plasmas; application to xenon EUV sources

International Nuclear Information System (INIS)

Gaufridy de Dortan, F. de

2006-01-01

Nearly all spectral opacity codes for LTE and NLTE plasmas rely on configurations approximate modelling or even supra-configurations modelling for mid Z plasmas. But in some cases, configurations interaction (either relativistic and non relativistic) induces dramatic changes in spectral shapes. We propose here a new detailed emissivity code with configuration mixing to allow for a realistic description of complex mid Z plasmas. A collisional radiative calculation. based on HULLAC precise energies and cross sections. determines the populations. Detailed emissivities and opacities are then calculated and radiative transfer equation is resolved for wide inhomogeneous plasmas. This code is able to cope rapidly with very large amount of atomic data. It is therefore possible to use complex hydrodynamic files even on personal computers in a very limited time. We used this code for comparison with Xenon EUV sources within the framework of nano-lithography developments. It appears that configurations mixing strongly shifts satellite lines and must be included in the description of these sources to enhance their efficiency. (author)

Description of the magnox type of gas cooled reactor (MAGNOX)

International Nuclear Information System (INIS)

Jensen, S.E.; Nonboel, E.

1999-05-01

The present report comprises a technical description of the MAGNOX type of reactor as it has been build in Great Britain. The Magnox reactor is gas cooled (CO 2 ) with graphite moderators. The fuels is natural uranium in metallic form, canned with a magnesium alloy called 'Magnox'. The Calder Hall Magnox plant on the Lothian coastline of Scotland, 60 km east of Edinburgh, has been chosen as the reference plant and is described in some detail. Data on the other stations are given in tables with a summary of design data. Special design features are also shortly described. Where specific data for Calder Hall Magnox has not been available, corresponding data from other Magnox plants has been used. The information presented is based on the open literature. The report is written as a part of the NKS/RAK-2 sub-project 3: 'Reactors in Nordic Surroundings', which comprises a description of nuclear power plants neighbouring the Nordic countries. (au)

29 CFR 551.5 - Information to be submitted.

Science.gov (United States)

2010-07-01

... employees compensated under the plan, including information as to the types of goods delivered, their points... application of the plan which are relied upon to support a finding that the plan has the general purpose and... 29 Labor 3 2010-07-01 2010-07-01 false Information to be submitted. 551.5 Section 551.5 Labor...

30 CFR 285.601 - When am I required to submit my plans to MMS?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false When am I required to submit my plans to MMS... Information Requirements § 285.601 When am I required to submit my plans to MMS? Your plan submission...) You must provide sufficient data and information with your COP for MMS to complete the needed reviews...

Demonstration Advanced Avionics System (DAAS) function description

Science.gov (United States)

Bailey, A. J.; Bailey, D. G.; Gaabo, R. J.; Lahn, T. G.; Larson, J. C.; Peterson, E. M.; Schuck, J. W.; Rodgers, D. L.; Wroblewski, K. A.

1982-01-01

The Demonstration Advanced Avionics System, DAAS, is an integrated avionics system utilizing microprocessor technologies, data busing, and shared displays for demonstrating the potential of these technologies in improving the safety and utility of general aviation operations in the late 1980's and beyond. Major hardware elements of the DAAS include a functionally distributed microcomputer complex, an integrated data control center, an electronic horizontal situation indicator, and a radio adaptor unit. All processing and display resources are interconnected by an IEEE-488 bus in order to enhance the overall system effectiveness, reliability, modularity and maintainability. A detail description of the DAAS architecture, the DAAS hardware, and the DAAS functions is presented. The system is designed for installation and flight test in a NASA Cessna 402-B aircraft.

Statistical analysis and interpretation of prenatal diagnostic imaging studies, Part 2: descriptive and inferential statistical methods.

Science.gov (United States)

Tuuli, Methodius G; Odibo, Anthony O

2011-08-01

The objective of this article is to discuss the rationale for common statistical tests used for the analysis and interpretation of prenatal diagnostic imaging studies. Examples from the literature are used to illustrate descriptive and inferential statistics. The uses and limitations of linear and logistic regression analyses are discussed in detail.

Simpevarp - site descriptive model version 0

International Nuclear Information System (INIS)

2002-11-01

During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

Descriptions of a new species and subspecies of Halysidota Hübner, [1819] from Mexico (Lepidoptera: Erebidae: Arctiinae)

OpenAIRE

Benoît Vincent; Michel Laguerre

2017-01-01

A new species and subspecies of the genus Halysidota are described from Mexico and Guadeloupe respectively: Halysidota witti sp. nov. and Halysidota leda guadulpensis ssp. nov. Details of the new species and subspecies descriptions are based upon morphological and molecular characters as well as distributional data.

Renewable energy for passive house heating. Part 1. Building description

Energy Technology Data Exchange (ETDEWEB)

Badescu, V. [Polytechnic Univ., Bucharest (Romania). Faculty of Mechanical Engineering; Sicre, B. [Technical Univ., Chemnitz (Germany). Computational Physics

2003-12-01

A passive house is a cost-efficient building that can manage throughout the heating period, due to its specific construction design, with more than 10 times less heat energy than the same building designed to standards presently applicable across Europe. Its extended thermal insulation and enhanced air-tightness removes the need for temperatures higher than 50 {sup o}C. This makes renewable energy sources particularly suitable for heating, cooling and domestic hot water production. Modeling of renewable energy usage for space heating requires as a preliminary stage the detailed description of the building structure, of the HVAC equipment and of the internal heat sources. This paper shows the main data used to model the thermal behavior of a passive house. Details about Pirmasens Passive House (Rhineland Palatinate, Germany) are given, as for example, the internal heat sources, including electric appliances, heat and humidity released by human bodies, thermal internal facilities as hot and cold water pipes. All these are quantified by using statistically derived data. A detailed time schedule for a standard German family with two adults and two children was prepared. It takes into account the national celebrations, vacation and weekends among others. (Author)

Reference design description for a geologic repository. Revision 02

International Nuclear Information System (INIS)

1999-01-01

This Reference Design Description explains the current design for a potential geologic repository that may be located at Yucca Mountain in Nevada. It describes the proposed design for a surface facility, subsurface repository, and waste packaging; it also presents the current design of the key engineering systems for the final four phases: operations, monitoring, closure, and postclosure. In addition, this Reference Design Description reviews the expected long-term performance of the potential repository. In accordance with current law, this design does not include an interim storage option. This document has six major sections. Section 1 describes the physical layout of the proposed repository. The second section describes the 4-phase evolution of the development of the proposed repository. Section 3 describes the reception of waste from offsite locations. The fourth section details the various systems that will package the waste and move it below ground as well as safety monitoring and closure. Section 5 describes the systems (both physical and analytical) that ensure continued safety after closure. The final section offers design options that may be adopted to increase the margin of safety

The International Classification of Functioning, Disability and Health (ICF): a unifying model for the conceptual description of the rehabilitation strategy.

Science.gov (United States)

Stucki, Gerold; Cieza, Alarcos; Melvin, John

2007-05-01

An important basis for the successful development of rehabilitation practice and research is a conceptually sound description of rehabilitation understood as a health strategy based on a universally accepted conceptual model and taxonomy of human functioning. With the approval of the International Classification of Functioning, Disability and Health (ICF) by the World Health Assembly in 2001 and the reference to the ICF in the World Health Assembly's resolution on "Disability, including prevention, management and rehabilitation" in 2005, we can now rely on a universally accepted conceptual model. It is thus time to initiate the process of evolving an ICF-based conceptual description that can serve as a basis for similar conceptual descriptions and according definitions of the professions applying the rehabilitation strategy and of distinct scientific fields of human functioning and rehabilitation research. In co-operation with the Physical and Rehabilitation Medicine (PRM) section of the European Union of Medical Specialists (UEMS) and its professional practice committee, we present a first tentative version of an ICF-based conceptual description in this paper. A brief definition describes rehabilitation as the health strategy applied by PRM and professionals in the health sector and across other sectors that aims to enable people with health conditions experiencing or likely to experience disability to achieve and maintain optimal functioning in interaction with the environment. Readers of the Journal of Rehabilitation Medicine are invited to contribute towards achieving an internationally accepted ICF-based conceptual description of rehabilitation by submitting commentaries to the Editor of this journal.

14 CFR 193.5 - How may I submit safety or security information and have it protected from disclosure?

Science.gov (United States)

2010-01-01

... SUBMITTED INFORMATION § 193.5 How may I submit safety or security information and have it protected from... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false How may I submit safety or security information and have it protected from disclosure? 193.5 Section 193.5 Aeronautics and Space FEDERAL AVIATION...

How to submit an ATIP request | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Corporations, businesses, and organizations with a Canadian presence have the right to make an access to Information request. Please note that an applicant may be charged additional search fees and/or preparation fees in regards to a request they have submitted under the Access to Information Act.

15 CFR 711.5 - Numerical precision of submitted data.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Numerical precision of submitted data. 711.5 Section 711.5 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS...

78 FR 38708 - Combined Notice of Filings #2

Science.gov (United States)

2013-06-27

...: Midcontinent Independent System Operator, Inc. submits 2013-06-17 Name Change Filing to be effective 6/1/2013.... Applicants: Gray County Wind Energy, LLC. Description: Gray County Wind Energy, LLC submits Gray County Wind... Wind Energy Center, LLC. Description: High Majestic Wind Energy Center, LLC submits High Majestic Wind...

78 FR 76606 - Combined Notice of Filings #2

Science.gov (United States)

2013-12-18

... Partners, Inc. Description: AEP Energy Partners, Inc. submits AEP Energy Partners MBR Waiver to be... Company submits Ohio Power Company MBR Tariff Filing to be effective 2/10/2014. Filed Date: 12/11/13...: Ohio Power Company. Description: Ohio Power Company submits Cancellation of Ohio Power's MBR Baseline...

A model-independent description of few-body system with strong interaction

International Nuclear Information System (INIS)

Simenog, I.V.

1985-01-01

In this contribution, the authors discuss the formulation of equations that provide model-independent description of systems of three and more nucleons irrespective of the details of the interaction, substantiate the approach, estimate the correction terms with respect to the force range, and give basic qualitative results obtained by means of the model-independent procedure. They consider three nucleons in the doublet state (spin S=I/2) taking into account only S-interaction. The elastic nd-scattering amplitude may be found from the model-independent equations that follow from the Faddeev equations in the short-range-force limit. They note that the solutions of several model-independent equations and basic results obtained with the use of this approach may serve both as a standard solution and starting point in the discussion of various conceptions concerning the details of nuclear interactions

Technical description - interim storage, encapsulation and disposal of spent nuclear fuel

International Nuclear Information System (INIS)

2010-07-01

The purpose of the annex Technical description is, in accordance with Chapter 22 paragraph 1 Environmental Code to describe the candidate operations and facilities. In particular, things that are important for their environmental impact are described. SKB's goal of the appendix is to describe the facilities, activities, pollution sources, land usage and more during construction, operation and decommissioning, to the extent and on a level of detail, so that the Environment Court without requiring additions can prepare the matter for the government's admissibility test

Description of the control and safety systems of the RA reactor

International Nuclear Information System (INIS)

Popovic, B.; Pesic, M.

1962-01-01

This report contains detailed description and scheme of the control and safety system of the RA reactor. It consists of interconnected five systems: for automated regulation; compensation rods; safety rods; power density measurement device; period meter; automated D 2 O level meter in the core. Automated regulation system is divided into two parts: basic system for reactor operation regime at power from 10kW - 10 MW and precise regulation system for operation at set-up power level up to 10 kW which is used occasionally

Fitness in paradise: quality of forensic reports submitted to the Hawaii judiciary.

Science.gov (United States)

Robinson, Richard; Acklin, Marvin W

2010-01-01

This paper examined quality of forensic reports submitted to the Hawaii Judiciary. Hawaii utilizes a three panel system for assessing fitness to proceed, where two psychologists and one psychiatrist submit independent reports to the Court. Utilizing a survey instrument based on previous research and nationally-derived quality standards, 150 competency to stand trial (CST) reports were examined. Reports demonstrated pervasive mediocrity with respect to quality (Mean QC=68.95, SD=15.21). One quarter (N=38) of the reports scored at or above 80% of the maximum possible score. Levels of CST agreement between evaluators and evaluators and judges were high. Report quality did not differ as a function of evaluator professional identity. Full-time employed evaluators submitted a greater number of reports above the quality criterion. For those evaluators who attended the March training, reports demonstrated significantly improved quality. Suggestions for enhancing report quality are offered with a special attention to inclusion of report elements, focus on inclusion of historical elements, and clearly described rationales supporting forensic opinions. (7664 words. Competency to stand trial, inter-rater agreement).

News from the Library: Share your work, submit your thesis to CDS!

CERN Multimedia

CERN Library

2011-01-01

Are you a student paid by CERN, using CERN equipment or advised by CERN staff and you are currently writing a thesis? Then you should know that you are welcome to submit your final work to the CERN Document Server (CDS), where it will be made available by Open Access.   This is the most efficient way of sharing your work within the community - your thesis will certainly find a much greater audience than if you follow the advice of certain dubious publishing companies (see the article Free access to science... but at what cost? published in this issue). At the same time, you ensure long-term storage of your file. All theses qualify, from bachelor to PhD, and any language is accepted. You simply go to CDS and submit your work. If your thesis was written some years ago it is still not too late to submit it; it will then get a new life on CDS! More information here. CERN Theses collection here. If you have any questions or submission problems, please do not hesitate to contact Catherine Cart. ...

36 CFR 1206.86 - What additional materials must I submit with the final narrative report?

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false What additional materials must I submit with the final narrative report? 1206.86 Section 1206.86 Parks, Forests, and Public... narrative report? You must submit the materials determined by the Commission as found in the NHPRC grant...

78 FR 72099 - Agency Information Collection Activities: Submitted for Office of Management and Budget Review...

Science.gov (United States)

2013-12-02

... January 2, 2014 for the assurance of consideration. ADDRESSES: Submit comments to the Office of... submitted is subject to subsequent audit and adjustment. A. Federal Oil and Gas Valuation Regulations The... allow or not allow one or both of the relief options . . . (d) If a State decides in advance . . . that...

Increased accuracy in mineral and hydrogeophysical modelling of HTEM data via detailed description of system transfer function and constrained inversion

DEFF Research Database (Denmark)

Viezzoli, Andrea; Christiansen, Anders Vest; Auken, Esben

This paper aims at providing more insight into the parameters that need to be modelled during inversion of Helicopter TEM data for accurate modelling, both for hydrogeophysical and exploration applications. We use synthetic data to show in details the effect, both in data and in model space...

Description of surface systems. Preliminary site description. Forsmark area Version 1.2

Energy Technology Data Exchange (ETDEWEB)

Lindborg, Tobias [ed.

2005-06-01

Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

Description of surface systems. Preliminary site description. Forsmark area Version 1.2

International Nuclear Information System (INIS)

Lindborg, Tobias

2005-06-01

Swedish Nuclear Fuel and Waste Management Co (SKB) started site investigations for a deep repository for spent nuclear fuel in 2002 at two different sites in Sweden, Forsmark and Oskarshamn. The investigations should provide necessary information for a license application aimed at starting underground exploration. For this reason, ecosystem data need to be interpreted and assessed into site descriptive models, which in turn are used for safety assessment studies and for environmental impact assessment. Descriptions of the surface system are also needed for further planning of the site investigations. This report describes the surface ecosystems of the Forsmark site (e.g. hydrology, Quaternary deposits, chemistry, vegetation, animals and the human land use). The ecosystem description is an integration of the site and its regional setting, covering the current state of the biosphere as well as the ongoing natural processes affecting the longterm development. Improving the descriptions is important during both the initial and the complete site investigation phase. Before starting of the initial phase in Forsmark, version 0 of the site descriptive model was developed. The results of the initial site investigation phase is compiled into a preliminary site description of Forsmark (version 1.2) in June 2005. This report provides the major input and background to the biosphere description, in the 1.2 version of the Forsmark site description. The basis for this interim version is quality-assured field data from the Forsmark sub area and regional area, available in the SKB SICADA, and GIS data bases as of July 31th 2004 as well as version 1.1 of the Site Descriptive Model. To achieve an ecosystem site description there is a need to develop discipline-specific models by interpreting and analysing primary data. The different discipline-specific models are then integrated into a system describing interactions and flows and stocks of matter between and within functional units in

Author Details

African Journals Online (AJOL)

Overview of prostate cancer in indigenous black Africans and blacks of African ancestry in diaspora 1935-2007. Abstract · Vol 84, No 9 (2007): Supplement - Articles The management of early prostate cancer: a review. Abstract · Vol 84, No 9 (2007): Supplement - Articles Descriptive case series of patients presenting with ...

Detailed description of oil shale organic and mineralogical heterogeneity via fourier transform infrared mircoscopy

Science.gov (United States)

Washburn, Kathryn E.; Birdwell, Justin E.; Foster, Michael; Gutierrez, Fernando

2015-01-01

Mineralogical and geochemical information on reservoir and source rocks is necessary to assess and produce from petroleum systems. The standard methods in the petroleum industry for obtaining these properties are bulk measurements on homogenized, generally crushed, and pulverized rock samples and can take from hours to days to perform. New methods using Fourier transform infrared (FTIR) spectroscopy have been developed to more rapidly obtain information on mineralogy and geochemistry. However, these methods are also typically performed on bulk, homogenized samples. We present a new approach to rock sample characterization incorporating multivariate analysis and FTIR microscopy to provide non-destructive, spatially resolved mineralogy and geochemistry on whole rock samples. We are able to predict bulk mineralogy and organic carbon content within the same margin of error as standard characterization techniques, including X-ray diffraction (XRD) and total organic carbon (TOC) analysis. Validation of the method was performed using two oil shale samples from the Green River Formation in the Piceance Basin with differing sedimentary structures. One sample represents laminated Green River oil shales, and the other is representative of oil shale breccia. The FTIR microscopy results on the oil shales agree with XRD and LECO TOC data from the homogenized samples but also give additional detail regarding sample heterogeneity by providing information on the distribution of mineral phases and organic content. While measurements for this study were performed on oil shales, the method could also be applied to other geological samples, such as other mudrocks, complex carbonates, and soils.

Analysis of magnetic-dipole transitions in tungsten plasmas using detailed and configuration-average descriptions

Science.gov (United States)

Na, Xieyu; Poirier, Michel

2017-06-01

This paper is devoted to the analysis of transition arrays of magnetic-dipole (M1) type in highly charged ions. Such transitions play a significant role in highly ionized plasmas, for instance in the tungsten plasma present in tokamak devices. Using formulas recently published and their implementation in the Flexible Atomic Code for M1-transition array shifts and widths, absorption and emission spectra arising from transitions inside the 3*n complex of highly-charged tungsten ions are analyzed. A comparison of magnetic-dipole transitions with electric-dipole (E1) transitions shows that, while the latter are better described by transition array formulas, M1 absorption and emission structures reveal some insufficiency of these formulas. It is demonstrated that the detailed spectra account for significantly richer structures than those predicted by the transition array formalism. This is due to the fact that M1 transitions may occur between levels inside the same relativistic configuration, while such inner configuration transitions are not accounted for by the currently available averaging expression. In addition, because of configuration interaction, transition processes involving more than one electron jump, such as 3p1/23d5/2 → 3p3/23d3/2, are possible but not accounted for in the transition array formulas. These missing transitions are collected in pseudo-arrays using a post-processing method described in this paper. The relative influence of inner- and inter-configuration transitions is carefully analyzed in cases of tungsten ions with net charge around 50. The need for an additional theoretical development is emphasized.

76 FR 67729 - Information Collection Being Submitted for Review and Approval to the Office of Management and...

Science.gov (United States)

2011-11-02

... operators submit this form to local franchising authorities or the Commission, in situations where the FCC... changes in external costs. Cable operators submit FCC Form 1240 to their respective local franchising...

13 CFR 120.830 - Reports a CDC must submit.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Reports a CDC must submit. 120.830 Section 120.830 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Development... each new associate and staff, a Statement of Personal History (for use by non-bank lenders and CDCs...

42 CFR 1008.11 - Who may submit a request.

Science.gov (United States)

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Who may submit a request. 1008.11 Section 1008.11 Public Health OFFICE OF INSPECTOR GENERAL-HEALTH CARE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OIG... advisory opinion regarding an existing arrangement or one which the requestor in good faith specifically...

Simulation model for wind energy storage systems. Volume III. Program descriptions. [SIMWEST CODE

Energy Technology Data Exchange (ETDEWEB)

Warren, A.W.; Edsinger, R.W.; Burroughs, J.D.

1977-08-01

The effort developed a comprehensive computer program for the modeling of wind energy/storage systems utilizing any combination of five types of storage (pumped hydro, battery, thermal, flywheel and pneumatic). An acronym for the program is SIMWEST (Simulation Model for Wind Energy Storage). The level of detail of SIMWEST is consistent with a role of evaluating the economic feasibility as well as the general performance of wind energy systems. The software package consists of two basic programs and a library of system, environmental, and load components. Volume III, the SIMWEST program description contains program descriptions, flow charts and program listings for the SIMWEST Model Generation Program, the Simulation program, the File Maintenance program and the Printer Plotter program. Volume III generally would not be required by SIMWEST user.

78 FR 63183 - Information Collection Request Submitted to OMB for Review and Approval; Comment Request; Mobile...

Science.gov (United States)

2013-10-23

... promulgated under SNAP require that Motor Vehicle Air Conditioners (MVACs) retrofitted to use a SNAP... Request Submitted to OMB for Review and Approval; Comment Request; Mobile Air Conditioner Retrofitting... Environmental Protection Agency has submitted an information collection request (ICR), Mobile Air Conditioner...

Field description of coarse bioclastic fabrics

Energy Technology Data Exchange (ETDEWEB)

Kidwell, S.M.; Holland, S.M. (Univ. of Chicago, IL (United States))

1991-08-01

Shell- and bone-bearing rocks can be readily categorized into 9 macroscopic fabric types using semi-quantitative scales for close-packing and size-sorting of bioclasts greater than 2 mm in diameter. Although designed to describe fossiliferous siliciclastics and volcaniclastics, this system of field description can also be used to enlarge upon standard petrographic descriptions of fossiliferous carbonates. In cross-sectional bed views, coarse bioclasts may be densely packed. These coarse bioclasts (>2 mm) may be well sorted (central 80% of bioclasts lie within 1 or 2 adjacent phi size-classes), bimodal (well sorted but with a distinct second mode), or poorly sorted (central 80% of bioclasts distributed over 3 or more adjacent size-classes). Despite the complicating effects of bioclast shape, novices show 90% accuracy in estimating close-packing from photographs. They have only 60% accuracy in estimating size-sorting (the most common error is underestimating goodness of sorting), underscoring the importance of size-tallies to cross-check visual estimates when first using this scheme. This packing/sorting approach provides a good visual image of the fabric, and narrows the range of possible modes of origin more than alternative criteria such as volumetric percent-abundance (which shows no one-to-one equivalence with close-packing), orientation, and fragmentation. However, detailed interpretations of fabrics usually require more information on these and other features of the deposit, including bioclast condition, associated sedimentary structures, life-habits of bioclast-producers, and stratigraphic context.

Description of a stable scheme for steady-state coupled Monte Carlo–thermal–hydraulic calculations

International Nuclear Information System (INIS)

Dufek, Jan; Eduard Hoogenboom, J.

2014-01-01

Highlights: • A stable coupling scheme for steady-state MC–TH calculations is described. • The coupling scheme is based on the stochastic approximation method. • The neutron flux (or power) distribution is relaxed using a variable step-size. - Abstract: We provide a detailed description of a numerically stable and efficient coupling scheme for steady-state Monte Carlo neutronic calculations with thermal–hydraulic feedback. While we have previously derived and published the stochastic approximation based method for coupling the Monte Carlo criticality and thermal–hydraulic calculations, its possible implementation has not been described in a step-by-step manner. As the simple description of the coupling scheme was repeatedly requested from us, we have decided to make it available via this note

48 CFR 1352.213-71 - Instructions for submitting quotations under the simplified acquisition threshold-non-commercial.

Science.gov (United States)

2010-10-01

... submitting quotations under the simplified acquisition threshold-non-commercial. 1352.213-71 Section 1352.213... quotations under the simplified acquisition threshold—non-commercial. As prescribed in 48 CFR 1313.302-1-70, insert the following provision: Instructions for Submitting Quotations Under the Simplified Acquisition...

Overview description of the base scenario derived from FEP analysis

International Nuclear Information System (INIS)

Locke, J.; Bailey, L.

1998-01-01

This report forms part of a suite of documents describing the Nirex model development programme. The programme is designed to provide a clear audit trail from the identification of significant features, events and processes (FEPs) to the models and modelling processes employed within a detailed performance assessment. A scenario approach to performance assessment has been adopted. It is proposed that potential evolutions of a deep geological radioactive waste repository can be represented by a base scenario and a number of variant scenarios. It is intended that assessment of the base scenario would form the core of any future performance assessment. The base scenario is chosen to be broad-ranging and to represent the natural evolution of the repository system and its surrounding environment. The base scenario is defined to include all those FEPs which are certain to occur and those which are judged likely to occur for a significant period of the assessment - timescale. Variant scenarios are defined by FEPs which represent a significant perturbation to the natural system evolution, for example the occurrence of a large seismic event. The structuring of FEPs on a Master Directed Diagram (MDD), provides a systematic framework for identifying those FEPs which form part of the natural evolution of the system and those which may define alternative potential evolutions of the repository system. In order to construct a description of the base scenario, FEPs have been grouped into a series of conceptual models. Conceptual models are groups of FEPs, identified from the MDD, representing a specific component or process within the disposal system. It has been found appropriate to define conceptual models in terms of the three main components of the disposal system: the repository engineered system, the surrounding geosphere and the biosphere. For each of these components, conceptual models provide a description of the relevant subsystem in terms of its initial characteristics

40 CFR 63.4910 - What notifications must I submit?

Science.gov (United States)

2010-07-01

..., accuracy, and completeness of the report. Such certifications must also comply with the requirements of 40... need to submit copies of any test reports. (i) Mass fraction of organic HAP for one coating, for one... mass of organic HAP contained in the waste materials for which you are claiming an allowance in...

Findings From the INANE Survey on Student Papers Submitted to Nursing Journals.

Science.gov (United States)

Kennedy, Maureen Shawn; Newland, Jamesetta A; Owens, Jacqueline K

Nursing students are often encouraged or required to submit scholarly work for consideration for publication but most manuscripts or course assignment papers do not meet journal standards and consume valuable resources from editors and peer reviewers. The International Academy of Nursing Editors (INANE) is a group of nurse editors and publishers dedicated to promoting best practices in publishing in the nursing literature. In August 2014, editors at INANE's annual meeting voiced frustrations over multiple queries, poorly written student papers, and lack of proper behavior in following through. This article describes the findings of a survey distributed to INANE members to seek feedback about submissions by students. Fifty-three (53) members responded to an online anonymous survey developed by the INANE Student Papers Work Group. Data were analyzed using descriptive statistics for Likert-type questions and content analysis of open-ended questions. Quantitative data revealed that most editors reported problems with student papers across all levels of graduate programs. Six themes emerged from the qualitative data: submissions fail to follow author guidelines; characteristics of student submissions; lack of professional behavior from students; lack of professional behavior from faculty; editor responses to student submissions; and faculty as mentors. These themes formed the basis for recommendations and strategies to improve student scholarly writing. Overall, editors endorsed supporting new scholars in the publication process but faculty engagement was integral to student success. Copyright © 2016 Elsevier Inc. All rights reserved.

Active Vertex Model for cell-resolution description of epithelial tissue mechanics.

Science.gov (United States)

Barton, Daniel L; Henkes, Silke; Weijer, Cornelis J; Sknepnek, Rastko

2017-06-01

We introduce an Active Vertex Model (AVM) for cell-resolution studies of the mechanics of confluent epithelial tissues consisting of tens of thousands of cells, with a level of detail inaccessible to similar methods. The AVM combines the Vertex Model for confluent epithelial tissues with active matter dynamics. This introduces a natural description of the cell motion and accounts for motion patterns observed on multiple scales. Furthermore, cell contacts are generated dynamically from positions of cell centres. This not only enables efficient numerical implementation, but provides a natural description of the T1 transition events responsible for local tissue rearrangements. The AVM also includes cell alignment, cell-specific mechanical properties, cell growth, division and apoptosis. In addition, the AVM introduces a flexible, dynamically changing boundary of the epithelial sheet allowing for studies of phenomena such as the fingering instability or wound healing. We illustrate these capabilities with a number of case studies.

Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

Energy Technology Data Exchange (ETDEWEB)

Lindborg, Tobias [ed.

2005-03-01

Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions.

Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

International Nuclear Information System (INIS)

Lindborg, Tobias

2005-03-01

Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions

Description of JNC's analytical method and its performance for FBR cores

International Nuclear Information System (INIS)

Ishikawa, M.

2000-01-01

The description of JNC's analytical method and its performance for FBR cores includes: an outline of JNC's Analytical System Compared with ERANOS; a standard data base for FBR Nuclear Design in JNC; JUPITER Critical Experiment; details of Analytical Method and Its Effects on JUPITER; performance of JNC Analytical System (effective multiplication factor k eff , control rod worth, and sodium void reactivity); design accuracy of a 600 MWe-class FBR Core. JNC developed a consistent analytical system for FBR core evaluation, based on JENDL library, f-table method, and three dimensional diffusion/transport theory, which includes comprehensive sensitivity tools to improve the prediction accuracy of core parameters. JNC system was verified by analysis of JUPITER critical experiment, and other facilities. Its performance can be judged quite satisfactory for FBR-core design work, though there is room for further improvement, such as more detailed treatment of cross-section resonance regions

Guidelines for Description

NARCIS (Netherlands)

Links, P.; Horsman, Peter; Kühnel, Karsten; Priddy, M.; Reijnhoudt, Linda; Merenmies, Mark

2013-01-01

The Guidelines follow the conceptual metadata model (deliverable 17.2). They include guidelines for description of collection-holding institutions, document collections, organisations, personalities, events, camps and ghettos. As much as possible the guidelines comply with the descriptive standards

Pressure vessels supported in the soil submitted to axissymetrical loads

International Nuclear Information System (INIS)

Gouvea, J.P. de; Bevilacqua, L.

1982-01-01

A pressure vessel, spherical segment or vertical cylinder, is supported in the soil and submitted to axissymetrical loads. The soil is considered as a semi-infinite elastic solid and the support as a lattice. The method of rigidity is used. (E.G.) [pt

Descriptive statistics.

Science.gov (United States)

Nick, Todd G

2007-01-01

Statistics is defined by the Medical Subject Headings (MeSH) thesaurus as the science and art of collecting, summarizing, and analyzing data that are subject to random variation. The two broad categories of summarizing and analyzing data are referred to as descriptive and inferential statistics. This chapter considers the science and art of summarizing data where descriptive statistics and graphics are used to display data. In this chapter, we discuss the fundamentals of descriptive statistics, including describing qualitative and quantitative variables. For describing quantitative variables, measures of location and spread, for example the standard deviation, are presented along with graphical presentations. We also discuss distributions of statistics, for example the variance, as well as the use of transformations. The concepts in this chapter are useful for uncovering patterns within the data and for effectively presenting the results of a project.

Description of the advanced gas cooled type of reactor (AGR)

Energy Technology Data Exchange (ETDEWEB)

Nonboel, E. [Risoe National Lab., Roskilde (Denmark)

1996-11-01

The present report comprises a technical description of the Advanced Gas cooled Reactor (AGR), a reactor type which has only been built in Great Britain. 14 AGR reactors have been built, located at 6 different sites and each station is supplied with twin-reactors. The Torness AGR plant on the Lothian coastline of Scotland, 60 km east of Edinburgh, has been chosen as the reference plant and is described in some detail. Data on the other 6 stations, Dungeness B, Hinkely Point B, Hunterston G, Hartlepool, Heysham I and Heysham II, are given only in tables with a summary of design data. Where specific data for Torness AGR has not been available, corresponding data from other AGR plans has been used, primarily from Heysham II, which belongs to the same generation of AGR reactors. The information presented is based on the open literature. The report is written as a part of the NKS/RAK-2 subproject 3: `Reactors in Nordic Surroundings`, which comprises a description of nuclear power plants neighbouring the Nordic countries. (au) 11 refs.

Description of the advanced gas cooled type of reactor (AGR)

International Nuclear Information System (INIS)

Nonboel, E.

1996-11-01

The present report comprises a technical description of the Advanced Gas cooled Reactor (AGR), a reactor type which has only been built in Great Britain. 14 AGR reactors have been built, located at 6 different sites and each station is supplied with twin-reactors. The Torness AGR plant on the Lothian coastline of Scotland, 60 km east of Edinburgh, has been chosen as the reference plant and is described in some detail. Data on the other 6 stations, Dungeness B, Hinkely Point B, Hunterston G, Hartlepool, Heysham I and Heysham II, are given only in tables with a summary of design data. Where specific data for Torness AGR has not been available, corresponding data from other AGR plans has been used, primarily from Heysham II, which belongs to the same generation of AGR reactors. The information presented is based on the open literature. The report is written as a part of the NKS/RAK-2 subproject 3: 'Reactors in Nordic Surroundings', which comprises a description of nuclear power plants neighbouring the Nordic countries. (au) 11 refs

Microscopic description of protein thermostabilization mechanisms with disaccharides from Raman spectroscopy investigations

Energy Technology Data Exchange (ETDEWEB)

Hedoux, A; Affouard, F; Descamps, M; Guinet, Y; Paccou, L [Laboratoire de Dynamique et Structure des Materiaux Moleculaires UMR CNRS 8024, Universite de Lille 1, UFR de Physique, Batiment P5, 59 655 Villeneuve d' Ascq Cedex (France)

2007-05-23

The mechanisms of protein thermostabilization by sugar were analysed for three disaccharides (maltose, sucrose and trehalose) characterized by the same chemical formula (C{sub 12}H{sub 22}O{sub 11}). Raman scattering investigations simultaneously carried out in the low-frequency range and in the amide I band region provide a microscopic description of the process of protein thermal denaturation. From this detailed description, the influence of sugar on this process was analysed. The principal effect of sugars is to stabilize the tertiary structure, in which the biomolecule preserves its native conformation, through a strengthening of O-H interactions. This study shows that the bioprotective properties of sugars are mainly based on interactions between water and sugar. The exceptional properties of trehalose to preserve the native state of lysozyme by heating can be associated with its capability to distort the tetra-bonded hydrogen bond network of water.

CATTLE PRODUCTIVE PERFORMANCE EVALUATION CONFINED SUBMITTED IMMUNOCASTRATION

Directory of Open Access Journals (Sweden)

J. M. Maluf

2016-09-01

Full Text Available In order to evaluate the performance and carcass characteristics of cattle cross breeds ½ Aberdeen Angus x ½Nelore and Nelore confined submitted to immunocastration 218 male animals were used, feedlot, averaging 342 kg, divided into three experimental groups, T1: 117 steers ½ Angus x ½ Nelore no castrated (ANC, T2: 51 Nelore steers uncastrated (NNC and T3: 50 Nellore steers immunocastrated (NIC. The experiment lasted 144 days of confinement. The selection of animals for group formation was according to the individual weight, breed, sex condition and age. For immunocastration it wasused Bopriva® vaccine. The rating was finished according to the parameter used by the meatpacking industry ranging from 1 to 5. The experimental design was completely randomized in three groups. For the analyzes the variables studied statistics were submitted to analysis of variance (ANOVA and Tukey test both at the 5% level of significance. The results showed differences (p <0.01 at various features of productive performance and carcass between treatments. For slaughter weight, the ANC animals were higher (with 582.1 kg to Nelore, regardless of sexual condition, and the NNC were in turn heavier than the NIC, 527.4 and 503.7 respectively. Finally, it observed that the use of immunocastration in Nellore animals provided a decrease in productive performance of confined animals, but provided better finish carcass similar to crossbred (ANC.

78 FR 73187 - Combined Notice of Filings #1

Science.gov (United States)

2013-12-05

.... Description: Rock River I, LLC submits 2nd Revised MBR to be effective 11/27/2013. Filed Date: 11/26/13...: Cabazon Wind Partners, LLC. Description: Cabazon Wind Partners, LLC submits 2nd Revised MBR to be...: Whitewater Hill Wind Partners, LLC submits 2nd Revised MBR to be effective 11/27/2013. Filed Date: 11/26/13...

Supporting Data Amended FY 1992/FY 1993 Biennial Budget Estimate Submitted to Congress - January 1992. Descriptive Summaries of the Research, Development, Test and Evaluation, Army Appropriation

Science.gov (United States)

1992-01-01

dessert and snack items to increase acceptability and 31$,) UNCLASSIFIED UNCLASSIFIED AMENDED FY 1992/1993 BIENNIAL RDTE DESCRIPTIVE SUMMARY Program...Planned Program: " (U) Finalize development of non-organic and non-polluting processing bids for extruded and molded energetic materials * (U

On Detailing in Contemporary Architecture

DEFF Research Database (Denmark)

Kristensen, Claus; Kirkegaard, Poul Henning

2010-01-01

Details in architecture have a significant influence on how architecture is experienced. One can touch the materials and analyse the detailing - thus details give valuable information about the architectural scheme as a whole. The absence of perceptual stimulation like details and materiality...... / tactility can blur the meaning of the architecture and turn it into an empty statement. The present paper will outline detailing in contemporary architecture and discuss the issue with respect to architectural quality. Architectural cases considered as sublime piece of architecture will be presented...

A not-so-short description of the PERFECT platform

International Nuclear Information System (INIS)

Bugat, S.; Zeghadi, A.; Adjanor, G.

2010-01-01

This article describes the building of the so-called 'PERFECT platform', which main issue was to allow the development of the PERFECT end-products dedicated to the prediction of the degradation of material properties due to irradiation. First, the general principles used to build the platform are detailed. Such principles guided the choices of preferential development language, architecture, and operating system. The architecture of the platform is then described. It allows an easy development of the end-products, and a 'black-box' integration of the codes developed during the project. Each end-product can be seen as a sequence of modules, each module representing a physical phenomenon in time and space. The platform is very flexible, so that different methodologies can be tested and compared inside an end-product. The second part is devoted to the description of a classical PERFECT study, defined thanks to the graphical user interface developed in the project. Focus is made in particular on how a selection of modules is done, how the input data can be entered, and how the study execution is fully controlled by the user. A final description of the post-processing facilities on the results is exposed.

Coarse-grained description of cosmic structure from Szekeres models

International Nuclear Information System (INIS)

Sussman, Roberto A.; Gaspar, I. Delgado; Hidalgo, Juan Carlos

2016-01-01

We show that the full dynamical freedom of the well known Szekeres models allows for the description of elaborated 3-dimensional networks of cold dark matter structures (over-densities and/or density voids) undergoing ''pancake'' collapse. By reducing Einstein's field equations to a set of evolution equations, which themselves reduce in the linear limit to evolution equations for linear perturbations, we determine the dynamics of such structures, with the spatial comoving location of each structure uniquely specified by standard early Universe initial conditions. By means of a representative example we examine in detail the density contrast, the Hubble flow and peculiar velocities of structures that evolved, from linear initial data at the last scattering surface, to fully non-linear 10–20 Mpc scale configurations today. To motivate further research, we provide a qualitative discussion on the connection of Szekeres models with linear perturbations and the pancake collapse of the Zeldovich approximation. This type of structure modelling provides a coarse grained—but fully relativistic non-linear and non-perturbative —description of evolving large scale cosmic structures before their virialisation, and as such it has an enormous potential for applications in cosmological research

Author Details

African Journals Online (AJOL)

Allah-kouadio, E. Vol 4, No 1 (2014) - Articles Pratique de la coloscopie à Abidjan (Côte d'Ivoire) : résultats d'une enquête descriptive au Centre Hospitalier Universitaire de Cocody. Abstract · Vol 5, No 1 (2015) - Articles Coloscopie des patients de 75 ans et plus : faisabilité, indications et rentabilité : Expérience du centre ...

Sensory evaluation of black beans submitted to gamma radiation from Cobalt-60; Avaliacao sensorial de feijao preto submetido a radiacao de Cobalto-60

Energy Technology Data Exchange (ETDEWEB)

Moura, Neila Camargo de; Canniatti-Brazaca, Solange Guidolin; Spoto, Marta Helena Fillet, E-mail: sgcbraza@esalq.usp.b [Escola Superior de Agricultura Luiz de Queiroz (ESALQ/USP), Piracicaba, SP (Brazil). Dept. de Agroindustria, Alimentos e Nutricao; Arthur, Valter [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil). Secao de Entomologia e Irradiacao de Alimentos

2005-04-15

The objective of this research was to evaluate the sensory aspects of black beans submitted to gamma radiation from {sup 60}Co. The study involved eight panelists, between 17 to 23 years old, who were selected and trained for the descriptive analysis of appearance, aroma, flavor and texture. The panelists analyzed alterations of appearance, aroma, flavor and texture of non-irradiated and irradiated black beans with doses 2, 4, 6, 8 and 10kGy. The results were analyzed by test F, ANOVA and the Tukey test (5%), with the use of computers and the sensory analysis software Compusense Five and SAS. The results showed that irradiated samples decreased the bitter flavor, accentuated color and brightness and samples non-irradiated dry texture. The radiation treatment is a good method for conservation of black beans in doses evaluated in this study.(author)

A New Browser-based, Ontology-driven Tool for Generating Standardized, Deep Descriptions of Geoscience Models

Science.gov (United States)

Peckham, S. D.; Kelbert, A.; Rudan, S.; Stoica, M.

2016-12-01

Standardized metadata for models is the key to reliable and greatly simplified coupling in model coupling frameworks like CSDMS (Community Surface Dynamics Modeling System). This model metadata also helps model users to understand the important details that underpin computational models and to compare the capabilities of different models. These details include simplifying assumptions on the physics, governing equations and the numerical methods used to solve them, discretization of space (the grid) and time (the time-stepping scheme), state variables (input or output), model configuration parameters. This kind of metadata provides a "deep description" of a computational model that goes well beyond other types of metadata (e.g. author, purpose, scientific domain, programming language, digital rights, provenance, execution) and captures the science that underpins a model. While having this kind of standardized metadata for each model in a repository opens up a wide range of exciting possibilities, it is difficult to collect this information and a carefully conceived "data model" or schema is needed to store it. Automated harvesting and scraping methods can provide some useful information, but they often result in metadata that is inaccurate or incomplete, and this is not sufficient to enable the desired capabilities. In order to address this problem, we have developed a browser-based tool called the MCM Tool (Model Component Metadata) which runs on notebooks, tablets and smart phones. This tool was partially inspired by the TurboTax software, which greatly simplifies the necessary task of preparing tax documents. It allows a model developer or advanced user to provide a standardized, deep description of a computational geoscience model, including hydrologic models. Under the hood, the tool uses a new ontology for models built on the CSDMS Standard Names, expressed as a collection of RDF files (Resource Description Framework). This ontology is based on core concepts

41 CFR 301-75.205 - Is the interviewee required to submit a travel claim to us?

Science.gov (United States)

2010-07-01

... required to submit a travel claim to us? 301-75.205 Section 301-75.205 Public Contracts and Property Management Federal Travel Regulation System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES AGENCY RESPONSIBILITIES 75... reimbursed, then he or she must submit a travel claim in accordance with your agency procedures in order to...

20 CFR 641.310 - May the Governor delegate responsibility for developing and submitting the State Plan?

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false May the Governor delegate responsibility for developing and submitting the State Plan? 641.310 Section 641.310 Employees' Benefits EMPLOYMENT AND TRAINING... developing and submitting the State Plan, provided that any such delegation is consistent with State law and...

The AAEC rotamak experiment description and preliminary results at low input power

International Nuclear Information System (INIS)

Durance, G.; Hogg, G.R.; Tendys, J.

1984-12-01

A description is given of the initial experiments on a rotamak device operating with 10 kW input power at a frequency of 1.85 MHz. The experimental apparatus and the diagnostic systems are also described. The matching of the radiofrequency power sources to the drive coils is discussed and details are given of the results from discharges in hydrogen, deuterium, helium and argon. The plasma/magnetic field configuration appears to be stable although, under certain conditions, fluctuations of the magnetic field structure have been observed

Computer Program for Calculation of Complex Chemical Equilibrium Compositions and Applications II. Users Manual and Program Description. 2; Users Manual and Program Description

Science.gov (United States)

McBride, Bonnie J.; Gordon, Sanford

1996-01-01

This users manual is the second part of a two-part report describing the NASA Lewis CEA (Chemical Equilibrium with Applications) program. The program obtains chemical equilibrium compositions of complex mixtures with applications to several types of problems. The topics presented in this manual are: (1) details for preparing input data sets; (2) a description of output tables for various types of problems; (3) the overall modular organization of the program with information on how to make modifications; (4) a description of the function of each subroutine; (5) error messages and their significance; and (6) a number of examples that illustrate various types of problems handled by CEA and that cover many of the options available in both input and output. Seven appendixes give information on the thermodynamic and thermal transport data used in CEA; some information on common variables used in or generated by the equilibrium module; and output tables for 14 example problems. The CEA program was written in ANSI standard FORTRAN 77. CEA should work on any system with sufficient storage. There are about 6300 lines in the source code, which uses about 225 kilobytes of memory. The compiled program takes about 975 kilobytes.

Fixation, description and DNA barcode of a neotype for Botryllus schlosseri (Pallas, 1766) (Tunicata, Ascidiacea).

Science.gov (United States)

Brunetti, Riccardo; Manni, Lucia; Mastrototaro, Francesco; Gissi, Carmela; Gasparini, Fabio

2017-11-22

Botryllus schlosseri is a widespread colonial ascidian commonly considered cosmopolitan and amply used as model for researches ranging from developmental biology to immunobiology. Recently, molecular data lead to hypothesize that the species named B. schlosseri may consist of more than a single taxon. Indeed, five highly divergent clades, named A-E, have been genetically identified and are referred as cryptic species. In this context, and lacking both a type and a detailed morphological description, we believe that it is necessary, as a taxonomic reference point, to designate a neotype and re-describe the species. Therefore, a sample from the Lagoon of Venice (Adriatic Sea, Italy) was deposited as neotype in the Natural History Museum of Venice (Italy), preserved both in formalin and in 90% ethanol. Here we provide a morphological description of the suggested neotype of B. schlosseri that takes into account several developmental stages (oozooid, zooid of first blastogenic generations, and mature zooid) and is carefully compared with the previous descriptions of samples coming from other European and non-European localities. Finally, we associate our morphological description to a "DNA barcode", consisting in a long fragment of the mitochondrial COI gene. Our description is associated to clade A, although at now we cannot guarantee that this association is univocal.

24 CFR 220.821 - Items to be filed on submitting claim.

Science.gov (United States)

2010-04-01

... filed on submitting claim. Within 30 days after the filing of the notice of intention to file claim, or... principal of the mortgage indebtedness; (h) All records, ledger cards, documents, books, papers and accounts...

VHDL Descriptions for the FPGA Implementation of PWL-Function-Based Multi-Scroll Chaotic Oscillators.

Directory of Open Access Journals (Sweden)

Esteban Tlelo-Cuautle

Full Text Available Nowadays, chaos generators are an attractive field for research and the challenge is their realization for the development of engineering applications. From more than three decades ago, chaotic oscillators have been designed using discrete electronic devices, very few with integrated circuit technology, and in this work we propose the use of field-programmable gate arrays (FPGAs for fast prototyping. FPGA-based applications require that one be expert on programming with very-high-speed integrated circuits hardware description language (VHDL. In this manner, we detail the VHDL descriptions of chaos generators for fast prototyping from high-level programming using Python. The cases of study are three kinds of chaos generators based on piecewise-linear (PWL functions that can be systematically augmented to generate even and odd number of scrolls. We introduce new algorithms for the VHDL description of PWL functions like saturated functions series, negative slopes and sawtooth. The generated VHDL-code is portable, reusable and open source to be synthesized in an FPGA. Finally, we show experimental results for observing 2, 10 and 30-scroll attractors.

VHDL Descriptions for the FPGA Implementation of PWL-Function-Based Multi-Scroll Chaotic Oscillators.

Science.gov (United States)

Tlelo-Cuautle, Esteban; Quintas-Valles, Antonio de Jesus; de la Fraga, Luis Gerardo; Rangel-Magdaleno, Jose de Jesus

2016-01-01

Nowadays, chaos generators are an attractive field for research and the challenge is their realization for the development of engineering applications. From more than three decades ago, chaotic oscillators have been designed using discrete electronic devices, very few with integrated circuit technology, and in this work we propose the use of field-programmable gate arrays (FPGAs) for fast prototyping. FPGA-based applications require that one be expert on programming with very-high-speed integrated circuits hardware description language (VHDL). In this manner, we detail the VHDL descriptions of chaos generators for fast prototyping from high-level programming using Python. The cases of study are three kinds of chaos generators based on piecewise-linear (PWL) functions that can be systematically augmented to generate even and odd number of scrolls. We introduce new algorithms for the VHDL description of PWL functions like saturated functions series, negative slopes and sawtooth. The generated VHDL-code is portable, reusable and open source to be synthesized in an FPGA. Finally, we show experimental results for observing 2, 10 and 30-scroll attractors.

Acceptance rate and reasons for rejection of manuscripts submitted to Veterinary Radiology & Ultrasound during 2012.

Science.gov (United States)

Lamb, Christopher R; Mai, Wilfried

2015-01-01

Better understanding of the reasons why manuscripts are rejected, and recognition of the most frequent manuscript flaws identified by reviewers, should help submitting authors to avoid these pitfalls. Of 219 manuscripts submitted to Veterinary Radiology & Ultrasound in 2012, none (0%) was accepted without revision, four (2%) were withdrawn by the authors, 99 (45%) were accepted after revision, and 116 (53%) were rejected. All manuscripts for which minor revision was requested, and 73/86 (85%) manuscripts for which major revision was requested, were ultimately accepted. Acceptance rate was greater for retrospective studies and for manuscripts submitted from countries in which English was the primary language. The prevalences of flaws in manuscripts were poor writing (62%), deficiencies in data (60%), logical or methodological errors (28%), content not suitable for Veterinary Radiology & Ultrasound (26%), and lack of new or useful knowledge (25%). Likelihood of manuscript rejection was greater for lack of new or useful knowledge and content not suitable than for other manuscript flaws. The lower acceptance rate for manuscripts from countries in which English was not the primary language was associated with content not suitable and not poor writing. Submitting authors are encouraged to do more to recognize and address manuscript flaws before submission, for example by internal review. Specifically, submitting authors should express clearly the potential added value of their study in the introduction section of their manuscript, describe completely their methods and results, and consult the Editor-in-Chief if they are uncertain whether their subject matter would be suitable for the journal. © 2014 American College of Veterinary Radiology.

Fertilizing properties of farm manure submitted to methane fermentation, according to pot tests

Energy Technology Data Exchange (ETDEWEB)

Kuzelewski, L; Pentkowski, A

1962-01-01

In order to compare the fertilizing properties of the ordinary farm manure stored and fermented in dung hills with those of the manure submitted to CH/sub 4/ fermentation, pot tests with oats and potatoes were carried out. Investigation showed that: N losses taking place during CH/sub 4/ fermentation are much smaller than those from manure fermented in dung-hills. Because of different fermentation processes, the losses of solid matter in the CH/sub 4/ fermentation were greater than in manure fermented and stored in dung-hills. Although the manure submitted to CH/sub 4/ fermentation contained more N, its effect on crops was almost identical with the effect of ordinary manure. Experiments have shown that it is not necessary to cover with soil the manure submitted to the CH/sub 4/ fermentation after spreading it. Whether it was covered with soil or not, there was no difference in crop yield. Manure fermenting in O-free atmosphere may contain products harmful to plants, but they oxidize quickly on exposure to the atmosphere. 53 references.

20 CFR 266.12 - Effect of matters or actions submitted or taken by legal guardian, etc.

Science.gov (United States)

2010-04-01

... taken by legal guardian, etc. 266.12 Section 266.12 Employees' Benefits RAILROAD RETIREMENT BOARD... submitted or taken by legal guardian, etc. All matters and actions in connection with an annuity submitted or taken by the guardian or other person legally vested with the care of the person or estate of an...

LAMMA 500 principle and technical description of the instrument

International Nuclear Information System (INIS)

Vogt, H.; Heinen, H.J.; Meier, S.; Wechsung, R.

1981-01-01

The Laser Microprobe Mass Analyzer LAMMA 500 originally had been designed for the analysis of biomedical samples, especially thin sections, with high lateral resolution and extreme detection sensitivity. The principle of LAMMA is based on the excitation of a microvolume of the sample to an ionized state by a focused laser beam. The analytical information is derived from mass spectrometry of these ions. It is obvious that all elements of the periodic table and their isotopes can be detected. Various applications have demonstrated that besides element detection the instrument can also be used for the detection of organic and inorganic compounds. A detailed description of the LAMMA 500 instrument is given. (orig./RB)

Spent nuclear fuel project cold vacuum drying facility vacuum and purge system design description

Energy Technology Data Exchange (ETDEWEB)

IRWIN, J.J.

1998-11-30

This document provides the System Design Description (SDD) for the Cold Vacuum Drying Facility (CVDF) Vacuum and Purge System (VPS) . The SDD was developed in conjunction with HNF-SD-SNF-SAR-O02, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of Processing Systems (Garvin 1998), The HNF-SD-SNF-DRD-002, 1998, Cold Vacuum Drying Facility Design Requirements, and the CVDF Design Summary Report. The SDD contains general descriptions of the VPS equipment, the system functions, requirements and interfaces. The SDD provides references for design and fabrication details, operation sequences and maintenance. This SDD has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved.

Spent nuclear fuel project cold vacuum drying facility process water conditioning system design description

International Nuclear Information System (INIS)

IRWIN, J.J.

1998-01-01

This document provides the System Design Description (SDD) for the Cold Vacuum Drying Facility (CVDF) Process Water Conditioning (PWC) System. The SDD was developed in conjunction with HNF-SD-SNF-SAR-002, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of Processing Systems (Garvin 1998), the HNF-SD-SNF-DRD-O02, 1998, Cold Vacuum Drying Facility Design Requirements, and the CVDF Design Summary Report. The SDD contains general descriptions of the PWC equipment, the system functions, requirements and interfaces. The SDD provides references for design and fabrication details, operation sequences and maintenance. This SDD has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved

Spent nuclear fuel project cold vacuum drying facility vacuum and purge system design description

International Nuclear Information System (INIS)

IRWIN, J.J.

1998-01-01

This document provides the System Design Description (SDD) for the Cold Vacuum Drying Facility (CVDF) Vacuum and Purge System (VPS) . The SDD was developed in conjunction with HNF-SD-SNF-SAR-O02, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of Processing Systems (Garvin 1998), The HNF-SD-SNF-DRD-002, 1998, Cold Vacuum Drying Facility Design Requirements, and the CVDF Design Summary Report. The SDD contains general descriptions of the VPS equipment, the system functions, requirements and interfaces. The SDD provides references for design and fabrication details, operation sequences and maintenance. This SDD has been developed for the SNFP Operations Organization and shall be updated, expanded, and revised in accordance with future design, construction and startup phases of the CVDF until the CVDF final ORR is approved

Descriptive set theory

CERN Document Server

Moschovakis, YN

1987-01-01

Now available in paperback, this monograph is a self-contained exposition of the main results and methods of descriptive set theory. It develops all the necessary background material from logic and recursion theory, and treats both classical descriptive set theory and the effective theory developed by logicians.

30 CFR 210.204 - How do I submit facility data?

Science.gov (United States)

2010-07-01

... 210.204 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR MINERALS REVENUE MANAGEMENT FORMS AND REPORTS Production and Royalty Reports-Solid Minerals § 210.204 How do I submit facility... stockpile inventory. (3) You must include in your facility data all production processed in the facility...

Plagiarism in submitted manuscripts: incidence, characteristics and optimization of screening-case study in a major specialty medical journal.

Science.gov (United States)

Higgins, Janet R; Lin, Feng-Chang; Evans, James P

2016-01-01

Plagiarism is common and threatens the integrity of the scientific literature. However, its detection is time consuming and difficult, presenting challenges to editors and publishers who are entrusted with ensuring the integrity of published literature. In this study, the extent of plagiarism in manuscripts submitted to a major specialty medical journal was documented. We manually curated submitted manuscripts and deemed an article contained plagiarism if one sentence had 80 % of the words copied from another published paper. Commercial plagiarism detection software was utilized and its use was optimized. In 400 consecutively submitted manuscripts, 17 % of submissions contained unacceptable levels of plagiarized material with 82 % of plagiarized manuscripts submitted from countries where English was not an official language. Using the most commonly employed commercial plagiarism detection software, sensitivity and specificity were studied with regard to the generated plagiarism score. The cutoff score maximizing both sensitivity and specificity was 15 % (sensitivity 84.8 % and specificity 80.5 %). Plagiarism was a common occurrence among manuscripts submitted for publication to a major American specialty medical journal and most manuscripts with plagiarized material were submitted from countries in which English was not an official language. The use of commercial plagiarism detection software can be optimized by selecting a cutoff score that reflects desired sensitivity and specificity.

78 FR 72139 - Forms Submitted to the Office of Management and Budget for Extension of Clearance

Science.gov (United States)

2013-12-02

... SELECTIVE SERVICE SYSTEM Forms Submitted to the Office of Management and Budget for Extension of Clearance AGENCY: Selective Service System. ACTION: Notice. The following forms have been submitted to the Office of Management and Budget (OMB) for extension of clearance in compliance with the Paperwork Reduction Act (44 U.S.C. Chapter 35): SSS FOR...

The procedures used to review safety analysis reports for packagings submitted to the US Department of Energy for certification

International Nuclear Information System (INIS)

Popper, G.F.; Raske, D.T.; Turula, P.

1988-01-01

This paper presents an overview of the procedures used at the Argonne National Laboratory (ANL) to review Safety Analysis Reports for Packagings (SARPs) submitted to the US Department of Energy (DOE) for issuance of a Certificate of Compliance. Prior to certification and shipment of a packaging for the transport of radioactive materials, a SARP must be prepared describing the design, contents, analyses, testing, and safety features of the packaging. The SARP must be reviewed to ensure that the specific packaging meets all DOE orders and federal regulations for safe transport. The ANL SARP review group provides an independent review and evaluation function for the DOE to ensure that the packaging meets all the prescribed requirements. This review involves many disciplines and includes evaluating the general information, drawings, construction details, operating procedures, maintenance and test programs, and the quality assurance plan for compliance with requirements. 14 refs., 6 figs

PROJECT W-551 INTERIM PRETREATMENT SYSTEM PRECONCEPTUAL CANDIDATE TECHNOLOGY DESCRIPTIONS

Energy Technology Data Exchange (ETDEWEB)

MAY TH

2008-08-12

The Office of River Protection (ORP) has authorized a study to recommend and select options for interim pretreatment of tank waste and support Waste Treatment Plant (WTP) low activity waste (LAW) operations prior to startup of all the WTP facilities. The Interim Pretreatment System (IPS) is to be a moderately sized system which separates entrained solids and 137Cs from tank waste for an interim time period while WTP high level waste vitrification and pretreatment facilities are completed. This study's objective is to prepare pre-conceptual technology descriptions that expand the technical detail for selected solid and cesium separation technologies. This revision includes information on additional feed tanks.

SELECTION OF ONTOLOGY FOR WEB SERVICE DESCRIPTION LANGUAGE TO ONTOLOGY WEB LANGUAGE CONVERSION

OpenAIRE

J. Mannar Mannan; M. Sundarambal; S. Raghul

2014-01-01

Semantic web is to extend the current human readable web to encoding some of the semantic of resources in a machine processing form. As a Semantic web component, Semantic Web Services (SWS) uses a mark-up that makes the data into detailed and sophisticated machine readable way. One such language is Ontology Web Language (OWL). Existing conventional web service annotation can be changed to semantic web service by mapping Web Service Description Language (WSDL) with the semantic annotation of O...

41 CFR 105-50.401 - Reports submitted to the Congress.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Reports submitted to the Congress. 105-50.401 Section 105-50.401 Public Contracts and Property Management Federal Property... Congress. (a) The Administrator of General Services will furnish annually to the respective Committees on...

13 CFR 108.2004 - Contents of application submitted by SSBICs.

Science.gov (United States)

2010-01-01

... the amount of Regulatory Capital it intends to raise after December 21, 2000, and the amount of... MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM Requirements and Procedures for Operational Assistance Grants to... increase in its Regulatory Capital since December 21, 2000. (b) Plan. An SSBIC must submit a plan...

System Design Description and Requirements for Modeling the Off-Gas Systems for Fuel Recycling Facilities

Energy Technology Data Exchange (ETDEWEB)

Daryl R. Haefner; Jack D. Law; Troy J. Tranter

2010-08-01

This document provides descriptions of the off-gases evolved during spent nuclear fuel processing and the systems used to capture the gases of concern. Two reprocessing techniques are discussed, namely aqueous separations and electrochemical (pyrochemical) processing. The unit operations associated with each process are described in enough detail so that computer models to mimic their behavior can be developed. The document also lists the general requirements for the desired computer models.

41 CFR 102-192.100 - How do we submit our annual mail management report to GSA?

Science.gov (United States)

2010-07-01

... management report to GSA? If your agency is a large agency, as defined in § 102-192.35, you must submit... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false How do we submit our annual mail management report to GSA? 102-192.100 Section 102-192.100 Public Contracts and Property...

Reproducible computational biology experiments with SED-ML--the Simulation Experiment Description Markup Language.

Science.gov (United States)

Waltemath, Dagmar; Adams, Richard; Bergmann, Frank T; Hucka, Michael; Kolpakov, Fedor; Miller, Andrew K; Moraru, Ion I; Nickerson, David; Sahle, Sven; Snoep, Jacky L; Le Novère, Nicolas

2011-12-15

The increasing use of computational simulation experiments to inform modern biological research creates new challenges to annotate, archive, share and reproduce such experiments. The recently published Minimum Information About a Simulation Experiment (MIASE) proposes a minimal set of information that should be provided to allow the reproduction of simulation experiments among users and software tools. In this article, we present the Simulation Experiment Description Markup Language (SED-ML). SED-ML encodes in a computer-readable exchange format the information required by MIASE to enable reproduction of simulation experiments. It has been developed as a community project and it is defined in a detailed technical specification and additionally provides an XML schema. The version of SED-ML described in this publication is Level 1 Version 1. It covers the description of the most frequent type of simulation experiments in the area, namely time course simulations. SED-ML documents specify which models to use in an experiment, modifications to apply on the models before using them, which simulation procedures to run on each model, what analysis results to output, and how the results should be presented. These descriptions are independent of the underlying model implementation. SED-ML is a software-independent format for encoding the description of simulation experiments; it is not specific to particular simulation tools. Here, we demonstrate that with the growing software support for SED-ML we can effectively exchange executable simulation descriptions. With SED-ML, software can exchange simulation experiment descriptions, enabling the validation and reuse of simulation experiments in different tools. Authors of papers reporting simulation experiments can make their simulation protocols available for other scientists to reproduce the results. Because SED-ML is agnostic about exact modeling language(s) used, experiments covering models from different fields of research

Reproducible computational biology experiments with SED-ML - The Simulation Experiment Description Markup Language

Science.gov (United States)

2011-01-01

Background The increasing use of computational simulation experiments to inform modern biological research creates new challenges to annotate, archive, share and reproduce such experiments. The recently published Minimum Information About a Simulation Experiment (MIASE) proposes a minimal set of information that should be provided to allow the reproduction of simulation experiments among users and software tools. Results In this article, we present the Simulation Experiment Description Markup Language (SED-ML). SED-ML encodes in a computer-readable exchange format the information required by MIASE to enable reproduction of simulation experiments. It has been developed as a community project and it is defined in a detailed technical specification and additionally provides an XML schema. The version of SED-ML described in this publication is Level 1 Version 1. It covers the description of the most frequent type of simulation experiments in the area, namely time course simulations. SED-ML documents specify which models to use in an experiment, modifications to apply on the models before using them, which simulation procedures to run on each model, what analysis results to output, and how the results should be presented. These descriptions are independent of the underlying model implementation. SED-ML is a software-independent format for encoding the description of simulation experiments; it is not specific to particular simulation tools. Here, we demonstrate that with the growing software support for SED-ML we can effectively exchange executable simulation descriptions. Conclusions With SED-ML, software can exchange simulation experiment descriptions, enabling the validation and reuse of simulation experiments in different tools. Authors of papers reporting simulation experiments can make their simulation protocols available for other scientists to reproduce the results. Because SED-ML is agnostic about exact modeling language(s) used, experiments covering models from

Content analyses of a priori qualitative phantom limb pain descriptions and emerging categories in mid-southerners with limb loss.

Science.gov (United States)

Evans, Cecile B

2014-01-01

The purposes of this descriptive study were (a) to identify the relative frequencies of a priori categories of phantom limb pain (PLP) quality descriptors reported by Mid-Southerners with limb loss, (b) to analyze their descriptions for emerging categories of PLP, and (c) to identify the relative frequencies of the emerging categories. This cross-sectional descriptive verbal survey assessed PLP descriptors. A content analyses determined relative frequencies of a priori PLP descriptors as well as emerging categories that were identified. The most common a priori PLP quality descriptors reported by 52 amputees with PLP were intermittent, tingling/needles/numb, sharp, cramping, burning, and stabbing. The most common emerging categories reported were pain compared to illness/injury, electrical cyclical, and manipulated/positional. The detailed descriptions of PLP provide insight into the vivid experiences of PLP. Rehabilitation nurses can use this information with PLP assessment, patient teaching, and counseling. © 2013 Association of Rehabilitation Nurses.

Author Details

African Journals Online (AJOL)

Journal Home > Advanced Search > Author Details. Log in or Register ... (2013) - Articles Technical Note: Development of a Photobioreactor for Microalgae Culture ... Design, Construction and Evaluation of Motorized Okra Slicer Abstract PDF ...

30 CFR 210.202 - How do I submit sales summaries?

Science.gov (United States)

2010-07-01

... documents from your own records. You do not need to re-format them before submitting them to us: Data... washing costs Monthly Monthly Not Required Monthly Monthly Not Required (v) Transportation costs Monthly... Management, Solid Minerals and Geothermal Compliance and Asset Management, P.O. Box 25165, MS 390G1, Denver...

13 CFR 108.2005 - Contents of plan submitted by SSBICs.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Contents of plan submitted by... Operational Assistance. The SSBIC must describe how it plans to use its grant funds to provide Operational... types of Operational Assistance it proposes to provide, and how it plans to provide the Operational...

Description of a medical writing rotation for a postgraduate pharmacy residency program.

Science.gov (United States)

Brown, Jamie N; Tiemann, Kelsey A; Ostroff, Jared L

2014-04-01

To provide a description of a pharmacy residency rotation dedicated to medical writing developed at a tertiary care academic medical center. Contribution to the medical literature is an important component of professional pharmacy practice, and there are many benefits seen by practitioners actively involved in scholarly activities. Residency programs have an opportunity to expand beyond the standard roles of postgraduate pharmacist training but rarely is there formal instruction on medical writing skills or are scholarship opportunities provided to residents. In order to address this deficiency, a residency program may consider the implementation of a formal Medical Writing rotation. This rotation is designed to introduce the resident to medical writing through active discussion on medical writing foundational topics, engage the resident in a collaborative review of a manuscript submitted to a peer-reviewed professional journal, and support the resident in the design and composition of manuscript of publishable quality. A structured Medical Writing rotation during a pharmacy resident's training can help develop the skills necessary to promote scholarly activities and foster resident interest in future pursuit of professional medical writing.

Experimental test on aluminium rod submitted to a laminar water flow

International Nuclear Information System (INIS)

Britto Aghina, L.O. de; Cruz, J.R.B.

1986-06-01

The result obtained from a experiment with an aluminium rod submitted to a laminar water flow is compared to the result predicted by empirical correlations used in the vibration analysis of the RPR reactor fuel rods. (L.C.J.A.)

Author Details

African Journals Online (AJOL)

Journal Home > Advanced Search > Author Details. Log in or Register to ... No 1 (2014) - Articles Knowledge and Attitudes towards Basic Cardiopulmonary Resuscitation (CPR) among Community Nurses in Remo Area of Ogun State, Nigeria

Author Details

African Journals Online (AJOL)

Journal Home > Advanced Search > Author Details ... Design and Implementation of an M/M/1 Queuing Model Algorithm and its Applicability in ... Vehicle Identification Technology to Intercept Small Arms and Ammunition on Nigeria Roads

75 FR 47805 - Combined Notice of Filings #1

Science.gov (United States)

2010-08-09

....E. Shaw Plasma Trading, LLC. Description: The Shaw Parties submits notification of cancellation of.... Applicants: D.E. Shaw Plasma Power, LLC. Description: The Shaw Parties submits notification of cancellation... and self-recertifications. The Commission encourages electronic submission of protests and...

System description of the Repository-Only System for the FY 1990 systems integration program studies

International Nuclear Information System (INIS)

McKee, R.W.; Young, J.R.; Konzek, G.J.

1991-07-01

This document provides both functional and physical descriptions of a conceptual high-level waste management system defined as a Repository-Only System. Its purpose is to provide a basis for required system computer modeling and system studies initiated in FY 1990 under the Systems Integration Program of the US Department of Energy's (DOE) Office of Civilian Radioactive Waste Management (OCRWM). The Repository-Only System is designed to accept 3000 MTU per year of spent fuel and 400 equivalent MTU per year of high-level wastes disposal in the geologic repository. This document contains both functional descriptions of the processes in the waste management system and physical descriptions of the equipment and facilities necessary for performance of those processes. These descriptions contain the level of detail needed for the projected systems analysis studies. The Repository-Only System contains all system components, from the waste storage facilities of the waste generators to the underground facilities for final disposal of the wastes. The major facilities in the system are the waste generator waste storage facilities, a repository facility that packages the wastes and than emplaces them in the geologic repository, and the transportation equipment and facilities for transporting the wastes between these major facilities. 18 refs., 39 figs

Handbook of Manufacturing Control Fundamentals, description, configuration

CERN Document Server

Lödding, Hermann

2013-01-01

This first-time English publication of one of Germany’s leading manufacturing control handbooks provides a comprehensive overview of the state of the art, with detailed and easy to understand descriptions of numerous control techniques from Kanban to CONWIP to Backlog Control. Based on the proven funnel model and written for the industry, this book clearly illustrates how companies can use manufacturing control to effectively improve on-time delivery, reduce inventories and cut down throughput times. “This book distinguishes itself with its convincing systematic approach based on thorough international research. Its clear presentation and direct applicability for analysing and configuring the manufacturing control make this handbook an outstanding and unique publication on PPC.” Hans-Peter Wiendahl “The field of manufacturing control is very convincingly reviewed and presented from a theoretical and methodological perspective. Both researchers as well as practitioners will profit from it.” Peter N...

Author Details

African Journals Online (AJOL)

Journal Home > Advanced Search > Author Details. Log in or ... The prevention of mother-to-child HIV transmission programme and infant feeding practices ... Evaluation of a diagnostic algorithm for smear-negative pulmonary tuberculosis in ...

The camera of the fifth H.E.S.S. telescope. Part I: System description

Energy Technology Data Exchange (ETDEWEB)

Bolmont, J., E-mail: bolmont@in2p3.fr [LPNHE, Université Pierre et Marie Curie Paris 6, Université Denis Diderot Paris 7, CNRS/IN2P3, 4 Place Jussieu, F-75252 Paris Cedex 5 (France); Corona, P.; Gauron, P.; Ghislain, P.; Goffin, C.; Guevara Riveros, L.; Huppert, J.-F.; Martineau-Huynh, O.; Nayman, P.; Parraud, J.-M.; Tavernet, J.-P.; Toussenel, F.; Vincent, D.; Vincent, P. [LPNHE, Université Pierre et Marie Curie Paris 6, Université Denis Diderot Paris 7, CNRS/IN2P3, 4 Place Jussieu, F-75252 Paris Cedex 5 (France); Bertoli, W.; Espigat, P.; Punch, M. [APC, AstroParticule et Cosmologie, Université Paris Diderot, CNRS/IN2P3, CEA/Irfu, Observatoire de Paris, Sorbonne Paris Cité, 10, rue Alice Domon et Léonie Duquet, F-75205 Paris Cedex 13 (France); Besin, D.; Delagnes, E.; Glicenstein, J.-F. [CEA Saclay, DSM/IRFU, F-91191 Gif-Sur-Yvette Cedex (France); and others

2014-10-11

In July 2012, as the four ground-based gamma-ray telescopes of the H.E.S.S. (High Energy Stereoscopic System) array reached their tenth year of operation in Khomas Highlands, Namibia, a fifth telescope took its first data as part of the system. This new Cherenkov detector, comprising a 614.5 m{sup 2} reflector with a highly pixelized camera in its focal plane, improves the sensitivity of the current array by a factor two and extends its energy domain down to a few tens of GeV. The present part I of the paper gives a detailed description of the fifth H.E.S.S. telescope's camera, presenting the details of both the hardware and the software, emphasizing the main improvements as compared to previous H.E.S.S. camera technology.

Characteristics of Qualitative Descriptive Studies: A Systematic Review.

Science.gov (United States)

Kim, Hyejin; Sefcik, Justine S; Bradway, Christine

2017-02-01

Qualitative description (QD) is a term that is widely used to describe qualitative studies of health care and nursing-related phenomena. However, limited discussions regarding QD are found in the existing literature. In this systematic review, we identified characteristics of methods and findings reported in research articles published in 2014 whose authors identified the work as QD. After searching and screening, data were extracted from the sample of 55 QD articles and examined to characterize research objectives, design justification, theoretical/philosophical frameworks, sampling and sample size, data collection and sources, data analysis, and presentation of findings. In this review, three primary findings were identified. First, although there were some inconsistencies, most articles included characteristics consistent with the limited available QD definitions and descriptions. Next, flexibility or variability of methods was common and effective for obtaining rich data and achieving understanding of a phenomenon. Finally, justification for how a QD approach was chosen and why it would be an appropriate fit for a particular study was limited in the sample and, therefore, in need of increased attention. Based on these findings, recommendations include encouragement to researchers to provide as many details as possible regarding the methods of their QD studies so that readers can determine whether the methods used were reasonable and effective in producing useful findings. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Author Details

African Journals Online (AJOL)

Journal Home > Advanced Search > Author Details. Log in or Register to get ... Optical bus of centralized relay protection and automation system of medium voltage switchgear for data collection and transmission. Abstract PDF. ISSN: 1112- ...

Statistical mechanics and the description of the early universe II. Principle of detailed balance and primordial 4He formation

DEFF Research Database (Denmark)

Pessah, Martin Elias; F. Torres, Diego

2001-01-01

If the universe is slightly non-extensive, and the distribution functions are not exactly given by those of Boltzmann-Gibbs, the primordial production of light elements will be non-trivially modified. In particular, the principle of detailed balance (PDB), of fundamental importance in the standard...... the formation of Helium and Deuterium, and study the kind of deviation one could expect from the standard regime. The correction to the capture time, the moment in which Deuterium can no longer be substantially photo-disintegrated, is also presented. This allows us to take into account the process of the free...

Decommissioning of the nuclear facilities at Risoe National Laboratory. Descriptions and cost assessment. Danish summary

International Nuclear Information System (INIS)

Lauridsen, Kurt

2001-02-01

The report gives a brief description of relevant aspects of the decommissioning of all nuclear facilities at Risoe National Laboratory, including the necessary operations to be performed and the associated costs. Together with a more detailed report, written in English, this report is the result of a project initiated by Risoe in the summer of 2000. The English report has undergone an international review, the results of which are summarised in the present report. (au)

Description and Codification of Miscanthus × giganteus Growth Stages for Phenological Assessment

Directory of Open Access Journals (Sweden)

Mauricio D. Tejera

2017-10-01

Full Text Available Triploid Miscanthus × giganteus (Greef et Deu. ex Hodkinson et Renvoize is a sterile, perennial grass used for biomass production in temperate environments. While M. × giganteus has been intensively researched, a scale standardizing description of M. × giganteus morphological stages has not been developed. Here we provide such a scale by adapting the widely-used Biologische Bundesanstalt, Bundessortenamt, CHemische Industrie (BBCH scale and its corresponding numerical code to describe stages of morphological development in M. × giganteus using observations of the “Freedom” and “Illinois” clone in Iowa, USA. Descriptive keys with images are also presented. Because M. × giganteus plants overlap in the field, the scale was first applied to individual stems and then scaled up to assess plants or communities. Of the 10 principal growth stages in the BBCH system, eight were observed in M. × giganteus. Each principal stage was subdivided into secondary stages to enable a detailed description of developmental progression. While M. × giganteus does not have seed development stages, descriptions of those stages are provided to extend the scale to other Miscanthus genotypes. We present methods to use morphological development data to assess phenology by calculating the onset, duration, and abundance of each developmental stage. This scale has potential to harmonize previously described study-specific scales and standardize results across studies. Use of the precise staging presented here should more tightly constrain estimates of developmental parameters in crop models and increase the efficacy of timing-sensitive crop management practices like pest control and harvest.

30 CFR 285.905 - When must I submit my decommissioning application?

Science.gov (United States)

2010-07-01

... application? 285.905 Section 285.905 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE RENEWABLE ENERGY ALTERNATE USES OF EXISTING FACILITIES ON THE OUTER CONTINENTAL SHELF Decommissioning Decommissioning Applications § 285.905 When must I submit my decommissioning application? You must...

Morell Mackenzie's Contribution to the Description of Spasmodic Dysphonia.

Science.gov (United States)

Lorch, Marjorie Perlman; Whurr, Renata

2016-12-01

Since the middle of the 20th century, most discussions of spasmodic dysphonia (SD) reference a paper by Ludwig Traube published in1871 as the first historical citation, crediting him with priority for this clinical syndrome. However, our recent research has determined that the original observation by Traube was published in 1864 and does not in fact describe what is currently recognized as SD. It appears that many clinics throughout Europe and North America were investigating and publishing observations on a range of voice disorders. The wider context of work on laryngeal disorders in the 1860s-1870s is considered. One of Traube's contemporaries, Morell Mackenzie, made significant contributions to the understanding of laryngeal movement disorder and its consequences for the voice. These will be examined to gain a clearer focus on the characterization of this disorder. The clinical descriptions published by Morrell Mackenzie in the 1860s provide details that conform quite closely to our current-day understanding of SD. The citation of Traube's "hysterical" patient links to mid 20th-century views of the functional nature of SD and the utility of psychiatric treatment. The description presented by Mackenzie is consistent with current views of SD as a movement disorder. © The Author(s) 2016.

RATIONAL AGGREGATION OF THE PRODUCTION LIST OF THE ECONOMIC MODEL WITH THE DETAILED TIMBER COMPLEX (ASSESSMENT ON THE BASE OF THE EXPERIMENTAL CALCULATIONS

Directory of Open Access Journals (Sweden)

Mkrtchyan G. M.

2015-09-01

Full Text Available The main principle of developing specialized model complexes is based on the approach when the detailed description of the object (the core, the main body is added by the description of the context. In addition to the above, the core of the system can be made up in turns by objects picked up from the context. Developing the models on separate subsystems of the economy, presented in details in the basic model, leads to creation of problems (equations with many variables and parameters where for the specific goals of analysis (and forecasting it is not at all obligatory to use the full-scale model. Such redundancy is unnecessary while using this model for scenario calculations in the context of “branch ” problems. The authors provide experimental calculations which allow evaluating the influence of aggregation on resulting information. Average year growth rates of production by branches of timber complex are considered as resulting information. Closeness of decisions on these indicators proves the hypothesis about possibility and rationality of such aggregation of the economic context for the timber complex.

18 CFR 35.5 - Rejection of material submitted for filing.

Science.gov (United States)

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Rejection of material submitted for filing. 35.5 Section 35.5 Conservation of Power and Water Resources FEDERAL ENERGY REGULATORY... that fails to comply with this Part may be rejected by the Director of the Office of Energy Market...

Citation analysis of doctoral theses submitted to the department of ...

African Journals Online (AJOL)

This is a bibliometric study carried out on eighty doctoral theses submitted to the Department of Library, Archival and Information Studies at the University of Ibadan, with the aim of determining the characteristics of citations in the theses. Most of the citations were to journals and books. Majority of the sources cited were old.

Trends in the number and the quality of trial protocols involving children submitted to a French Institutional Review Board

Directory of Open Access Journals (Sweden)

Isabelle Gautier

2017-08-01

Full Text Available Abstract Background There is a great need for high quality clinical research for children. The European Pediatric Regulation aimed to improve the quality of clinical trials in order to increase the availability of treatments for children. The main purpose of this study was to assess the evolution of both the number and the quality of pediatric trial protocols that were submitted to a French Institutional Review Board (IRB00009118 before and after the initiation of the EU Pediatric Regulation. Methods All protocols submitted to the IRB00009118 between 2003 and 2014 and conducting research on subjects under eighteen years of age were eligible. The quality of randomized clinical trials was assessed according to the guidelines developed by the Enhancing the QUAlity and Transparency Of health Research (EQUATOR Network and ranked using the Jadad score. Results Out of 622 protocols submitted to the Institutional Review Board (IRB, 21% (133/622 included children. Among these 133 pediatric protocols, the number of submitted pediatric protocols doubled between the two studied periods. From 2003 to 2008, 47 protocols including 21 institutionally sponsored were submitted to the IRB and from 2009 until 2014, 86 protocols including 48 institutionally sponsored were submitted. No significant trend was observed on the quality of RCTs. The overall median score of RCTs on the Jadad scale was high (3.5, 70.0% of protocols had a Jadad score ≥ 3, and 30.0% had a score < 3. Conclusion Following the EU Pediatric Regulation, the number of pediatric protocols submitted to the IRB00009118 tends to increase, but no change was noticed regarding their quality.

Production aspects of broiler breeders submitted to different drinker types

Directory of Open Access Journals (Sweden)

LP Colvero

2014-03-01

Full Text Available The objective of this study was of evaluate the influence of different drinker types on the egg production, water intake, mortality, poultry litter relative humidity, egg weight, eggshell percentage, and egg specific gravity of broiler breeders. The experiment was carried out in a commercial farm with 37- to 44-wk-old broiler breeders. A randomized block experimental design, consisting of two treatments (bell or nipple drinkers with four replicates of 4.000 females each, was applied. Data were submitted to analysis of variance, and means were compared by the test of Student-Newman-Keuls at 5% significance level. Birds submitted to nipple drinkers presented lower water intake (p0.05 of drinker type on egg production or mortality. Poultry litter relative humidity was lower (p<0.05 under the nipple-drinker system. Birds drinking from bell drinkers produced heavier eggs (p<0.05 between weeks 39 and 40. Hens drinking from bell drinkers laid eggs with higher specific gravity and eggshell percentage. It was concluded that nipple drinkers can be used for broiler breeders during lay.

Durability 2007. Injection grout investigations. Background description

International Nuclear Information System (INIS)

Orantie, K.; Kuosa, H.

2008-12-01

The aim of this project was to evaluate the durability risks of injection grouts. The investigations were done with respect to the application conditions, materials and service life requirements at the ONKALO underground research facility. The study encompassed injection grout mixtures made of ultrafine cement with and without silica fume. Some of the mixtures hade a low pH and thus a high silica fume content. The project includes a background description on durability literature, laboratory testing programme, detailed analysis of results and recommendations for selecting of ideal grout mixtures. The background description was made for the experimental study of low-pH and reference rock injection grouts as regards pore- and microstructure, strength, shrinkage/swelling and thus versatile durability properties. A summary of test methods is presented as well as examples, i.e. literature information or former test results, of expected range of results from the tests. Also background information about how the test results correlate to other material properties and mix designs is presented. Besides the report provides basic information on the pore structure of cement based materials. Also the correlation between the pore structure of cement based materials and permeability is shortly discussed. The test methods included in the background description are compressive strength, measurement of bulk drying, autogenous and chemical shrinkage and swelling, hydraulic conductivity / permeability, capillary water uptake test, mercury intrusion porosimetry (MIP) and thin section analysis. Three main mixtures with water-binder ratio of 0.8, 1.0 and 1.4 and silica fume content of 0, 15 and 40% were studied in the laboratory. Besides two extra mixtures were studied to provide additional information about the effect of varying water-dry-material ratio and silica fume content on durability. The evaluation of water tightness based on water permeability coefficient and micro cracking was

Characteristics, Quality and Contribution to Signal Detection of Spontaneous Reports of Adverse Drug Reactions Via the WEB-RADR Mobile Application: A Descriptive Cross-Sectional Study.

Science.gov (United States)

Oosterhuis, Ingrid; Taavola, Henric; Tregunno, Philip M; Mas, Petar; Gama, Sara; Newbould, Victoria; Caster, Ola; Härmark, Linda

2018-05-14

Spontaneous reporting of suspected adverse drug reactions is key for efficient post-marketing safety surveillance. To increase usability and accessibility of reporting tools, the Web-Recognising Adverse Drug Reactions (WEB-RADR) consortium developed a smartphone application (app) based on a simplified reporting form. The objective of this study was to evaluate the characteristics, quality and contribution to signals of reports submitted via the WEB-RADR app. The app was launched in the UK, the Netherlands and Croatia between July 2015 and May 2016. Spontaneous reports submitted until September 2016 with a single reporter were included. For each country, app reports and reports received through conventional means in the same time period were compared to identify characteristic features. A random subset of reports was assessed for clinical quality and completeness. The contribution to signal detection was assessed by a descriptive analysis. Higher proportions of app reports were submitted by patients in the UK (28 vs. 18%) and Croatia (32 vs. 7%); both p < 0.01. In the Netherlands, the difference was small (60 vs. 57%; p = 0.5). The proportion of female patients and the median patient ages in app reports submitted by patients were similar to the reference. The proportion of reports of at least moderate quality was high in both samples (app: 78-85%, reference: 78-98%), for all countries. App reports contributed to detecting eight potential safety signals at the national level, four of which were eventually signalled. The WEB-RADR app offers a new route of spontaneous reporting that shows promise in attracting reports from patients and that could become an important tool in the future. Patient demographics are similar to conventional routes, report quality is sufficient despite a simplified reporting form, and app reports show potential in contributing to signal detection.

A new compiler for the GANIL Data Acquisition description

International Nuclear Information System (INIS)

Saillant, F.; Raine, B.

1997-01-01

An important feature of the GANIL Data Acquisition System is the description of the experiments by means of a language developed at GANIL. The philosophy is to attribute to each element (parameters, spectra, etc) an operational name which will be used at any level of the system. This language references a library of modules to free the user from the technical details of the hardware. This compiler has been recently entirely re-developed using technologies as the object-oriented language (C++) and object-oriented software development method and tool. This enables us to provide a new functionality or to support a new electronic module within a very short delay and without any deep modification of the application. A new Dynamic Library of Modules has been also developed. Its complete description is available on the GANIL WEB site http://ganinfo.in2p3.fr/acquisition/homepage.html. This new compiler brings a lot of new functionalities, among which the most important is the notion of 'register' whatever the module standard is. All the registers described in the module provider's documentation can now be accessed by their names. Another important new feature is the notion of 'function' that can be executed on a module. Also a set of new instructions has been implemented to execute commands on CAMAC crates. Another possibility of this new compiler is to enable the description of specific interfaces with GANIL Data Acquisition System. This has been used to describe the coupling of the CHIMERA Data Acquisition System with the INDRA one through a shared memory in the VME crate. (authors)

SU-F-P-01: Changing Your Oncology Information System: A Detailed Process and Lessons Learned

Energy Technology Data Exchange (ETDEWEB)

Abing, C [Gundersen Lutheran Medical Center, La Crosse, WI (United States)

2016-06-15

Purpose: Radiation Oncology departments are faced with many options for pairing their treatment machines with record and verify systems. Recently, there is a push to have a single-vendor-solution. In order to achieve this, the department must go through an intense and rigorous transition process. Our department has recently completed this process and now offer a detailed description of the process along with lessons learned. Methods: Our cancer center transitioned from a multi-vendor department to a single-vendor department over the 2015 calendar year. Our staff was partitioned off into superuser groups, an interface team, migration team, and go-live team. Six months after successful implementation, a detailed survey was sent to the radiation oncology department to determine areas for improvement as well as successes in the process. Results: The transition between record and verify systems was considered a complete success. The results of the survey did point out some areas for improving inefficiencies with our staff; both interactions between each other and the vendors. Conclusion: Though this process was intricate and lengthy, it can be made easier with careful planning and detailed designation of project responsibilities. Our survey results and retrospective analysis of the transition are valuable to those wishing to make this change.

CEPF Western Ghats Special Series: Description of tadpole stages of the Malabar Tree Toad Pedostibes tuberculosis Gunther, 1875 (Anura: Bufonidae

Directory of Open Access Journals (Sweden)

K.P. Dinesh

2014-10-01

Full Text Available Pedostibes tuberculosus, the Malabar tree toad, was described 137 years ago from the Malabar region (now the coastal parts of Kerala of the Western Ghats. Since the description of this arboreal toad, not much information is available on the natural history, breeding habits and life cycle except for its description, range of distribution and advertisement call details. In the present account, the tadpole stages of this toad from Gosner tadpole Stage 21 to 45 are presented and the phytotelmatic mode of life of this toad has been confirmed by locating the tadpoles within the Ochlandra reed culm.

Evaluation of the motility function of the gall - bladder in subject submitted to a vagotomy

International Nuclear Information System (INIS)

Szegoe, T.

1989-01-01

The emptying of the gallbladder was studied in 13 patients submited to truncal vagotomy, 14 to selective vagotomy, associated to hemi-gastrectomy and reconstruction of the digestive tract through gastroduodenostomy; 15 pacients submited to proximal gastrix vagotomy and 15 controls. The evaluation was done by the injection of 185 MBq (5 mCi) of DISIDA - 99m Tc and images were obtained in gamma-camera at 70, 100, 115 and 130 minutes after the venous injection of the radioisotope. (L.M.J.) [pt

Certification of Public Librarians in the United States; A Detailed Summary of Legal and Voluntary Certification Plans for Public Librarians Based on Information Supplied by the Various Certificating State Agencies or other Appropriate Sources, 2nd Edition.

Science.gov (United States)

Frame, Ruth R.; Coyne, John R.

Contained in this report is a detailed summary of legal and voluntary certification plans for public librarians in each of the 50 states. Descriptions of the certification plans for public librarians are based on information supplied by state agencies in September 1971. Each plan is identified by the descriptive terms--mandatory, permissive or…

Study on detailed geological modelling for fluvial sandstone reservoir in Daqing oil field

Energy Technology Data Exchange (ETDEWEB)

Zhao Hanqing; Fu Zhiguo; Lu Xiaoguang [Institute of Petroleum Exploration and Development, Daqing (China)

1997-08-01

Guided by the sedimentation theory and knowledge of modern and ancient fluvial deposition and utilizing the abundant information of sedimentary series, microfacies type and petrophysical parameters from well logging curves of close spaced thousands of wells located in a large area. A new method for establishing detailed sedimentation and permeability distribution models for fluvial reservoirs have been developed successfully. This study aimed at the geometry and internal architecture of sandbodies, in accordance to their hierarchical levels of heterogeneity and building up sedimentation and permeability distribution models of fluvial reservoirs, describing the reservoir heterogeneity on the light of the river sedimentary rules. The results and methods obtained in outcrop and modem sedimentation studies have successfully supported the study. Taking advantage of this method, the major producing layers (PI{sub 1-2}), which have been considered as heterogeneous and thick fluvial reservoirs extending widely in lateral are researched in detail. These layers are subdivided into single sedimentary units vertically and the microfacies are identified horizontally. Furthermore, a complex system is recognized according to their hierarchical levels from large to small, meander belt, single channel sandbody, meander scroll, point bar, and lateral accretion bodies of point bar. The achieved results improved the description of areal distribution of point bar sandbodies, provide an accurate and detailed framework model for establishing high resolution predicting model. By using geostatistic technique, it also plays an important role in searching for enriched zone of residual oil distribution.

Quality Assurance Requirements and Description

International Nuclear Information System (INIS)

Ram Murthy

2002-01-01

The Quality Assurance Requirements and Description (QARD) is the principal Quality Assurance (QA) document for the Civilian Radioactive Waste Management Program (Program). It establishes the minimum requirements for the QA program [INTRODUCTION :1p2s (NOT A REQUIREMENT)]. The QARD contains regulatory requirements and program commitments necessary for the development of an effective QA program [INTRODUCTION :1p3s (NOT A REQUIREMENT)]. Implementing documents must be based on, and be consistent with the QARD. The QARD applies to the following: (1) Acceptance of spent nuclear fuel and high-level waste. (2) Transport of spent nuclear fuel and high-level waste. (3) Storage of spent nuclear fuel through receipt of storage cask certification or a facility operating license. (4) Monitored Geologic Repository, including the site characterization activities [Exploratory Studies Facility (ESF) and surface based testing], through receipt of an operating license. (5) High-level waste form development through qualification, production, and acceptance. (6) Characterization of DOE spent nuclear fuel, and conditioning through acceptance of DOE spent nuclear fuel. Section 2.0, Quality Assurance Program, defines in greater detail criteria for determining work subject to the QARD

Directory of AFRL/HEA Technical Publications Submitted to DTIC from 1969 to 2007

National Research Council Canada - National Science Library

Bell, Herbert H; Casey, Elizabeth P

2007-01-01

...) has submitted technical publications to the Defense Technical Information Center (DTIC) documenting the unique research and development efforts conducted by this organization to improve warfighter training...

The KAERI 10 MeV Electron Linac - Description and Operational Manual

Energy Technology Data Exchange (ETDEWEB)

Lee, Byung Cheol; Park, Seong Hee; Jung, Young Uk; Han, Young Hwan; Kang, Hee Young

2005-06-15

The objective of this technical report is to guide the right operation and maintenance of the KAERI electron linac system. The KAERI electron linac system consists of 2 MeV injector based on 176 MHz Normal conducting RF (Radio Frequency)cavity and 10 MeV main accelerator based on 352 MHz Superconducting RF cavity, electron beamlines (injection and extraction). Since a electron accelerator generates hazard radiation, this system is located at the shielded room in basement and we can operate the system using the remote control system. It includes the description and the operational manual as well as the detailed technical direction for trouble shooting.

The KAERI 10 MeV Electron Linac - Description and Operational Manual

International Nuclear Information System (INIS)

Lee, Byung Cheol; Park, Seong Hee; Jung, Young Uk; Han, Young Hwan; Kang, Hee Young

2005-06-01

The objective of this technical report is to guide the right operation and maintenance of the KAERI electron linac system. The KAERI electron linac system consists of 2 MeV injector based on 176 MHz Normal conducting RF (Radio Frequency)cavity and 10 MeV main accelerator based on 352 MHz Superconducting RF cavity, electron beamlines (injection and extraction). Since a electron accelerator generates hazard radiation, this system is located at the shielded room in basement and we can operate the system using the remote control system. It includes the description and the operational manual as well as the detailed technical direction for trouble shooting

CONSTRUCTION OF AGGREGATE NATIONAL ECONOMIC MODEL WITH DETAILED REPRESENTATION OF THE FOREST COMPLEX

Directory of Open Access Journals (Sweden)

Blam Yu. Sh.

2014-09-01

Full Text Available Autonomy of the industrial forecasts often exacerbated by the lack of direct connection with the economic forecasts on the macro level. On the other hand it is desirable to simulate the industrial strategy in a fairly high degree of isolation, so that it does not depend at every moment on description of other activities or levels of hierarchy. To study the effects of national economic relations on the development of industrial complex we propose to use a spatial model of the national economy, which describes modalities of the researched industries in more detail. Quantitative parameters, obtained using basic Interregional Cross-sectoral Optimization Model (OMMM against the external development of the industrial complex, are used to form an aggregated model with a detailed representation with unsignificant loss of information. Thus, the above described model is intended to harmonize national economic decisions with forecasts obtained from industry models in real terms. The conversion procedure is based on the properties of the model of «mutual» problems and information from basic OMMM. The final result is a production-transport cost model within a «traditional» industrial structure.

76 FR 12952 - Combined Notice of Filings #1

Science.gov (United States)

2011-03-09

..., March 22, 2011. Docket Numbers: ER11-2982-000. Applicants: PPL Electric Utilities Corporation. Description: PPL Electric Utilities Corporation submits tariff filing per 35: PPL Electric Utilities...: PPL New Jersey Biogas, LLC. Description: PPL New Jersey Biogas, LLC submits tariff filing per 35: PPL...

A full description of a simple and scalable fabrication process for electrowetting displays

International Nuclear Information System (INIS)

Zhou, K; Heikenfeld, J; Dean, K A; Howard, E M; Johnson, M R

2009-01-01

Electrowetting displays provide a high white state reflectance of >50% and have attracted substantial world-wide interest, yet are primarily an industrially led effort with few details on preferred materials and fabrication processes. Reported herein is the first complete description of the electrowetting display fabrication process. The description includes materials selection, purification and all fabrication steps from substrate selection to sealing. Challenging materials and fabrication processes include dielectric optimization, fluoropolymer selection, hydrophilic grid patterning, liquid dosing, dye purification and liquid ionic content. The process described herein has produced pixel arrays that were switched at 2 . The majority of fabrication processes can conform to liquid-crystal style manufacturing equipment, and therefore can be readily adopted by many display practitioners. Also presented are additional tips and techniques, such as controlling the onset of oil film break-up in an electrowetting display. This paper should enable anyone skilled in displays or microfabrication to quickly and successfully set up research and fabrication of electrowetting displays

MPEG-7-based description infrastructure for an audiovisual content analysis and retrieval system

Science.gov (United States)

Bailer, Werner; Schallauer, Peter; Hausenblas, Michael; Thallinger, Georg

2005-01-01

We present a case study of establishing a description infrastructure for an audiovisual content-analysis and retrieval system. The description infrastructure consists of an internal metadata model and access tool for using it. Based on an analysis of requirements, we have selected, out of a set of candidates, MPEG-7 as the basis of our metadata model. The openness and generality of MPEG-7 allow using it in broad range of applications, but increase complexity and hinder interoperability. Profiling has been proposed as a solution, with the focus on selecting and constraining description tools. Semantic constraints are currently only described in textual form. Conformance in terms of semantics can thus not be evaluated automatically and mappings between different profiles can only be defined manually. As a solution, we propose an approach to formalize the semantic constraints of an MPEG-7 profile using a formal vocabulary expressed in OWL, which allows automated processing of semantic constraints. We have defined the Detailed Audiovisual Profile as the profile to be used in our metadata model and we show how some of the semantic constraints of this profile can be formulated using ontologies. To work practically with the metadata model, we have implemented a MPEG-7 library and a client/server document access infrastructure.

Description logics of context

CSIR Research Space (South Africa)

Klarman, S

2013-05-01

Full Text Available We introduce Description Logics of Context (DLCs) - an extension of Description Logics (DLs) for context-based reasoning. Our approach descends from J. McCarthy's tradition of treating contexts as formal objects over which one can quantify...

Detonation and fragmentation modeling for the description of large scale vapor explosions

International Nuclear Information System (INIS)

Buerger, M.; Carachalios, C.; Unger, H.

1985-01-01

The thermal detonation modeling of large-scale vapor explosions is shown to be indispensable for realistic safety evaluations. A steady-state as well as transient detonation model have been developed including detailed descriptions of the dynamics as well as the fragmentation processes inside a detonation wave. Strong restrictions for large-scale vapor explosions are obtained from this modeling and they indicate that the reactor pressure vessel would even withstand explosions with unrealistically high masses of corium involved. The modeling is supported by comparisons with a detonation experiment and - concerning its key part - hydronamic fragmentation experiments. (orig.) [de

Discussion of submitted posters for Section 2.3 (Rangeland Germplasm Resources)

Science.gov (United States)

As part of the IX International Rangeland Congress held in Rosario, Argentina, a total of 70 posters from 17 countries were submitted to Section 2.3 (Rangeland Germplasm Resources). These posters documented research conducted in five major regions of the world: South America, North America, Africa...

15 CFR 711.2 - Who submits declarations, reports, and advance notifications.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Who submits declarations, reports, and advance notifications. 711.2 Section 711.2 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS...

40 CFR 63.6009 - What notifications must I submit and when?

Science.gov (United States)

2010-07-01

... National Emissions Standards for Hazardous Air Pollutants: Rubber Tire Manufacturing Notifications, Reports... this subpart. (d) If you are required to conduct a performance test, you must submit a notification of intent to conduct a performance test at least 60 calendar days before the performance test is scheduled...

Revisiting the Seductive Details Effect in Multimedia Learning: Context-Dependency of Seductive Details

Science.gov (United States)

Ozdemir, Devrim; Doolittle, Peter

2015-01-01

The purpose of this study was to investigate the effects of context-dependency of seductive details on recall and transfer in multimedia learning environments. Seductive details were interesting yet irrelevant sentences in the instructional text. Two experiments were conducted. The purpose of Experiment 1 was to identify context-dependent and…

An Exploratory Study into Perceived Task Complexity, Topic Specificity and Usefulness for Integrated Search

DEFF Research Database (Denmark)

Ingwersen, Peter; Lioma, Christina; Larsen, Birger

2012-01-01

We investigate the relations between user perceptions of work task complexity, topic specificity, and usefulness of retrieved results. 23 academic researchers submitted detailed descriptions of 65 real-life work tasks in the physics domain, and assessed documents retrieved from an integrated...... collection consisting of full text research articles in PDF, abstracts, and bibliographic records [6]. Bibliographic records were found to be more precise than full text PDFs, regardless of task complexity and topic specificity. PDFs were found to be more useful. Overall, for higher task complexity and topic...

25 CFR 516.2 - When may a person to whom this part applies give testimony, make a statement or submit to interview?

Science.gov (United States)

2010-04-01

... testimony, make a statement or submit to interview? 516.2 Section 516.2 Indians NATIONAL INDIAN GAMING... whom this part applies give testimony, make a statement or submit to interview? (a) No person to whom... regulation, shall provide testimony, make a statement or submit to interview. (b) Whenever a subpoena...

Author Details

African Journals Online (AJOL)

Radwan M.D, Mona Ahmed. Vol 12, No 1 (2000) - Articles RELAPSING REMITTING MULTIPLE SCLEROSIS: CT AND MRI IMAGING VS CLINICAL FINDINGIN THE DIAGNOSIS AND DETERMINATION OF DISEASE ACTIVITY. Details. ISSN: 1110-5607. AJOL African Journals Online. HOW TO USE AJOL... for Researchers ...

Analysis of final year DVM research projects submitted to the Faculty ...

African Journals Online (AJOL)

This study analyzed the intellectual output of the undergraduate final year students. research projects submitted to the Faculty of Veterinary Medicine, Usmanu Danfodiyo University, Sokoto, from 1994 to 2004. The findings of the study show that a total of 194 research projects were produced within the period under study.

30 CFR 210.105 - May I submit these production reports manually?

Science.gov (United States)

2010-07-01

... addressed to Minerals Management Service, P.O. Box 17110, Denver, Colorado 80217-0110; or (2) Special... 30 Mineral Resources 2 2010-07-01 2010-07-01 false May I submit these production reports manually? 210.105 Section 210.105 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR...

75 FR 68340 - Combined Notice of Filings # 1

Science.gov (United States)

2010-11-05

... Project, LP; Southern Company--Florida LLC. Description: Report of Non-Material Change in Estimated Coal... Energy Ohio, Inc. submits tariff filing per 35: Compliance Filing to be effective 7/29/2010. Filed Date..., Inc. Description: Midwest Independent Transmission System Operator, Inc. submits tariff filing per 35...

76 FR 59675 - Combined Notice of Filings #2

Science.gov (United States)

2011-09-27

...: Yuma Power Limited Liability Company. Description: Yuma Power Limited Liability Company submits notice.... Docket Numbers: ER11-3846-002. Applicants: El Paso Electric Company. Description: El Paso Electric Company submits tariff filing per 35: Compliance Filing of El Paso-Tucson Settlement to be effective 9/1...

20 CFR 645.415 - What planning information must a State submit in order to receive a formula grant?

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What planning information must a State submit in order to receive a formula grant? 645.415 Section 645.415 Employees' Benefits EMPLOYMENT AND... Grants Administration § 645.415 What planning information must a State submit in order to receive a...

Impedance planimetric description of normal rectoanal motility in humans

DEFF Research Database (Denmark)

Andersen, Inge S; Michelsen, Hanne B; Krogh, Klaus

2007-01-01

PURPOSE: Manometry and pressure-volume measurements are commonly used to study anorectal physiology. However, the methods are limited by several sources of error. Recently, a new impedance planimetric system has been introduced in a porcine model. It allows simultaneous determination of anorectal...... pressures and multiple rectal luminal cross-sectional areas. This study was designed to study normal human rectoanal motility by means of impedance planimetry with multiple rectal cross-sectional areas and rectal and anal pressure. METHODS: Twelve healthy volunteers (10 females), aged 24 to 53 years, were...... the experiment, the cross-sectional area at all channels showed strong cyclic contractile activity and the anal pressure increased by approximately 100 percent. CONCLUSIONS: The new rectal impedance planimetry system allows highly detailed description of rectoanal motility patterns. It has promise as a new...

New approaches for description of nitrogen chemistry in combustion

Energy Technology Data Exchange (ETDEWEB)

Hupa, M.; Kilpinen, P.; Brink, A.; Norstroem, T. [Aabo Akademi, Turku (Finland)

1996-12-01

The aim of the project is to develop novel models for a more accurate description of nitrogen oxide emissions from combustion processes and to increase the understanding of the complex details of homogeneous nitrogen reactions in combustion and gasification. The topics dealt with during 1995 include: (1) effect of Cl on CO oxidation and nitrogen reactions, (2) effect of pressure on NO reduction by SNCR (in co-operation with the project 204), (3) NH{sub 3} conversion to N{sub 2} in gasification gases by selective oxidation (in cooperation with the project 203). In addition, a literature review of the models suggested for the interaction between turbulence and a chemical gas-phase reaction has been made. A commercial CFD code, FLUENT, has also been taken into use. (author)

Digitizing rocks: Standardizing the process of geologic description with workstations

International Nuclear Information System (INIS)

Saunders, M.R.; Shields, J.A.; Taylor, M.R.

1995-01-01

In the drive to squeeze the most value from every dollar spent on exploration and development, increasing use is being made of stored data through methods that rely on the completeness and accuracy of the database for their usefulness. Although many types of engineering data are available to the process, geologic data, especially those collected at a sufficiently detailed level to show reservoir heterogeneity, are often unavailable to later workers in any useful form. Traditionally, most wellsite geologic data are recorded on worksheets or notebooks, from which summary data are often transferred to computers. The only changes in recent years have been related to the process by which computer-drafted lithology logs have superseded hand-drawn logs; in some exceptions, some of the plotting data may be held in a simple database. These descriptions and analyses, gathered at considerable cost and capable of showing significant petrological detail, are not available to the whole field-development process. The authors set out to tackle these problems of limited usefulness and development a system that would deliver quality geologic data deep into the field of play in a form that was easy to select and integrated with existing models

Author Details

African Journals Online (AJOL)

Green, J.M.. Vol 10, No 1 (2001) - Articles Information from Radio Telemetry on movements and exploitation of naturalized Rainbow trout, Oncorhynchus mykiss (Walbaum), in Kenya cold water streams. Details. ISSN: 0002-0036. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians ...

The Consumer Motivation Scale: A detailed review of item generation, exploration, confirmation, and validation procedures

Directory of Open Access Journals (Sweden)

I. Barbopoulos

2017-08-01

Full Text Available This data article offers a detailed description of analyses pertaining to the development of the Consumer Motivation Scale (CMS, from item generation and the extraction of factors, to confirmation of the factor structure and validation of the emergent dimensions. The established goal structure – consisting of the sub-goals Value for Money, Quality, Safety, Stimulation, Comfort, Ethics, and Social Acceptance – is shown to be related to a variety of consumption behaviors in different contexts and for different products, and should thereby prove useful in standard marketing research, as well as in the development of tailored marketing strategies, and the segmentation of consumer groups, settings, brands, and products.

The Consumer Motivation Scale: A detailed review of item generation, exploration, confirmation, and validation procedures.

Science.gov (United States)

Barbopoulos, I; Johansson, L-O

2017-08-01

This data article offers a detailed description of analyses pertaining to the development of the Consumer Motivation Scale (CMS), from item generation and the extraction of factors, to confirmation of the factor structure and validation of the emergent dimensions. The established goal structure - consisting of the sub-goals Value for Money, Quality, Safety, Stimulation, Comfort, Ethics, and Social Acceptance - is shown to be related to a variety of consumption behaviors in different contexts and for different products, and should thereby prove useful in standard marketing research, as well as in the development of tailored marketing strategies, and the segmentation of consumer groups, settings, brands, and products.

20 CFR 667.120 - What planning information must a State submit in order to receive a formula grant?

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false What planning information must a State submit in order to receive a formula grant? 667.120 Section 667.120 Employees' Benefits EMPLOYMENT AND... INVESTMENT ACT Funding § 667.120 What planning information must a State submit in order to receive a formula...

Re-description and Reassignment of the Damselfish Abudefduf luridus (Cuvier, 1830) Using Both Traditional and Geometric Morphometric Approaches

Energy Technology Data Exchange (ETDEWEB)

Cooper, W. James [Washington State Univ., Pullman, WA (United States); Albertson, R Craig [Univ. of Massachusetts, Amherst, MA (United States); Jacob, Rick E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Westneat, Mark W. [Field Museum of Natural History, Chicago, IL (United States)

2014-12-01

Here we present a re-description of Abudefduf luridus and reassign it to the genus Similiparma. We supplement traditional diagnoses and descriptions of this species with quantitative anatomical data collected from a family-wide geometric morphometric analysis of head morphology (44 species representing all 30 damselfish genera) and data from cranial micro-CT scans of fishes in the genus Similiparma. The use of geometric morphometric analyses (and other methods of shape analysis) permits detailed comparisons between the morphology of specific taxa and the anatomical diversity that has arisen in an entire lineage. This provides a particularly useful supplement to traditional description methods and we recommend the use of such techniques by systematists. Similiparma and its close relatives constitute a branch of the damselfish phylogenetic tree that predominantly inhabits rocky reefs in the Atlantic and Eastern Pacific, as opposed to the more commonly studied damselfishes that constitute a large portion of the ichthyofauna on all coral-reef communities.

5th environmental report submitted by the Hessian Government

International Nuclear Information System (INIS)

1992-01-01

The 5th environmental report submitted by the Hessian Government informs about the success of environmental policies in the period under review and discuss the future tasks and targets with emphasis on I) environmental quality in Hesse (A. Nature and ladscape, B. water, C. air, D. noise, E. chemicals, industrial monitoring, F. wastes, G. pollutants in the food chain, H. radioactivity and radiation protection), II) selected instruments and points of main effort, III) work and environment; Appendix. (BBR) [de

34 CFR 656.10 - What combined application may an institution submit?

Science.gov (United States)

2010-07-01

... LANGUAGE AND AREA STUDIES OR FOREIGN LANGUAGE AND INTERNATIONAL STUDIES How Does One Apply for a Grant... 34 Education 3 2010-07-01 2010-07-01 false What combined application may an institution submit? 656.10 Section 656.10 Education Regulations of the Offices of the Department of Education (Continued...

40 CFR 63.9350 - What reports must I submit and when?

Science.gov (United States)

2010-07-01

... new or reconstructed affected source that must meet the emission limitation, you must submit a... there is no deviation from the applicable emission limitation and the CEMS or CPMS was not out-of... reconstructed engine test cell/stand during the reporting period. (3) A summary of the total duration of the...

30 CFR 210.55 - May I submit this royalty report manually?

Science.gov (United States)

2010-07-01

... to Minerals Management Service, P.O. Box 5810, Denver, Colorado 80217-5810; or (2) Special courier or... 30 Mineral Resources 2 2010-07-01 2010-07-01 false May I submit this royalty report manually? 210.55 Section 210.55 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR MINERALS...

Detailed description of a new management system for solid, short-lived low and intermediate level radioactive waste at Ignalina NPP

International Nuclear Information System (INIS)

2002-01-01

The objective is to modify and extend the existing system at the Ignalina Nuclear Power Plant (INPP) for handling of Very Low Level Waste (VLLW), short lived Low and Intermediate Level Waste (LLW-SL and ILW-SL). The ultimate aim is to reduce the risks and the influence on the personnel and the environment. According to the request from INPP, the modified system is based on the existence of an incineration plant. This system description describes treatment of non-combustible VLLW, LLW-SL and ILW-SL at a new waste handling facility (WHF) located in the future buildings 159/2 and 159/3 at the INPP. The new WHF is also handling Exempt Waste (EW), Reusable Material (RM) and Free Release Goods (FRG). The buildings 159/2 and 159/3 are future extensions of the existing building 159. (author)

Fort Hood Solar Total Energy Project. Volume II. Preliminary design. Part 1. System criteria and design description. Final report

Energy Technology Data Exchange (ETDEWEB)

None,

1979-01-01

This volume documents the preliminary design developed for the Solar Total Energy System to be installed at Fort Hood, Texas. Current system, subsystem, and component designs are described and additional studies which support selection among significant design alternatives are presented. Overall system requirements which form the system design basis are presented. These include program objectives; performance and output load requirements; industrial, statutory, and regulatory standards; and site interface requirements. Material in this section will continue to be issued separately in the Systems Requirements Document and maintained current through revision throughout future phases of the project. Overall system design and detailed subsystem design descriptions are provided. Consideration of operation and maintenance is reflected in discussion of each subsystem design as well as in an integrated overall discussion. Included are the solar collector subsystem; the thermal storage subsystem, the power conversion sybsystem (including electrical generation and distribution); the heating/cooling and domestic hot water subsystems; overall instrumentation and control; and the STES building and physical plant. The design of several subsystems has progressed beyond the preliminary stage; descriptions for such subsystems are therefore provided in more detail than others to provide complete documentation of the work performed. In some cases, preliminary design parameters require specific verificaton in the definitive design phase and are identified in the text. Subsystem descriptions will continue to be issued and revised separately to maintain accuracy during future phases of the project. (WHK)

THE SHEFFIELD ALCOHOL POLICY MODEL - A MATHEMATICAL DESCRIPTION.

Science.gov (United States)

Brennan, Alan; Meier, Petra; Purshouse, Robin; Rafia, Rachid; Meng, Yang; Hill-Macmanus, Daniel; Angus, Colin; Holmes, John

2014-09-30

This methodology paper sets out a mathematical description of the Sheffield Alcohol Policy Model version 2.0, a model to evaluate public health strategies for alcohol harm reduction in the UK. Policies that can be appraised include a minimum price per unit of alcohol, restrictions on price discounting, and broader public health measures. The model estimates the impact on consumers, health services, crime, employers, retailers and government tax revenues. The synthesis of public and commercial data sources to inform the model structure is described. A detailed algebraic description of the model is provided. This involves quantifying baseline levels of alcohol purchasing and consumption by age and gender subgroups, estimating the impact of policies on consumption, for example, using evidence on price elasticities of demand for alcohol, quantification of risk functions relating alcohol consumption to harms including 47 health conditions, crimes, absenteeism and unemployment, and finally monetary valuation of the consequences. The results framework, shown for a minimum price per unit of alcohol, has been used to provide policy appraisals for the UK government policy-makers. In discussion and online appendix, we explore issues around valuation and scope, limitations of evidence/data, how the framework can be adapted to other countries and decisions, and ongoing plans for further development. © 2014 The Authors. Health Economics published by John Wiley & Sons Ltd. © 2014 The Authors. Health Economics published by John Wiley & Sons Ltd.

Author Details

African Journals Online (AJOL)

Aderinokun, GA. Vol 9, No 1 (1999) - Articles Relative Influence Of Sociodemographic Variables On Oral Health And Habits Of Some Nigerian School Children Abstract · Vol 9, No 4 (1999) - Articles Oral health services in Nigeria Details. ISSN: 0189-2657. AJOL African Journals Online. HOW TO USE AJOL.

Author Details

African Journals Online (AJOL)

Development of a trap to contaminate variegated grasshoppers (Zonocerus variegatus L.) (Orthoptera: Pyrgomorphidae) with Metarrhyzium flavo-viride Gams & Rozsypal in the field. Details · Vol 40, No 1 (2007) - Articles Yam pests in the Ashanti and Brong Ahafo regions of Ghana: A study of farmers\\' indigenous technical ...

Author Details

African Journals Online (AJOL)

Geotechnical properties of lateritic soil developed over quartz schist in Ishara area, south western Nigeria Details · Vol 44, No 1 (2008) - Articles Comparative study of the influence of cement and lime stabilization on geotechnical properties of lateritic soil derived from pegmatite in Ago-Iwoye area, southwestern Nigeria

Author Details

African Journals Online (AJOL)

SAMA, G. Vol 2 (2002): Supplement - Articles A Longitudinal Study of the Role of T Cell subset, Th1/Th2 cytokines and antiplasmodial antibodies in uncomplicated Malaria in a Village Population Chronically Exposed to Plasmodium falciparum Malaria. Details PDF · AJOL African Journals Online. HOW TO USE AJOL.

Author Details

African Journals Online (AJOL)

KOUONTCHOU, Samuel. Vol 2 (2002): Supplement - Articles Prevalence of Multiple Concomitant Intestinal Parasitic Infections in Simbok a Malaria Endemic Village in Cameroon. Details PDF · Vol 2 (2002): Supplement - Articles A Longitudinal Study of the Role of T Cell subset, Th1/Th2 cytokines and antiplasmodial ...

Author Details

African Journals Online (AJOL)

ALAKE, J. Vol 2 (2002): Supplement - Articles A Longitudinal Study of the Role of T Cell subset, Th1/Th2 cytokines and antiplasmodial antibodies in uncomplicated Malaria in a Village Population Chronically Exposed to Plasmodium falciparum Malaria. Details PDF · AJOL African Journals Online. HOW TO USE AJOL.

Author Details

African Journals Online (AJOL)

A Preliminary Investigation of Relative Frequency of Undiagnosed and Previously Diagnosed Hypertension Before First Stroke in a Lagos Hospital Abstract · Vol 9, No 4 (1999) - Articles Localised tetanus in Lagos, Nigeria Details · Vol 9, No 4 (1999) - Articles Stroke with localised infarction of Wernicke's Area misdiagnosed ...

Author Details

African Journals Online (AJOL)

Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text ... Abstract · Vol 17 (2010) - Articles Investigating The Travelling Wave Solution For an SIR Endemic Disease Model With No Disease Related Death (When The Spatial Spread Of The Susceptible Is Not Negligible). Abstract.

Author Details

African Journals Online (AJOL)

Rakotonirina, Alice. Vol 2, No 2 (2002) - Articles Effect of the decoction of rhizomes of Cyperus articulatus on bicuculline-, N-methyl-D-aspartate- and strychnine-induced behavioural excitation and convulsions in mice. Details PDF · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians ...

76 FR 64937 - Combined Notice of Filings #1

Science.gov (United States)

2011-10-19

.... Description: Lockhart Power Company submits tariff filing per 35: Revisions to Lockhart MBR Tariff to be... Inc. Description: Alcoa Power Generating Inc. submits tariff filing per 35: APGI Revisions to MBR...: APM Revisions to MBR Tariff--Seller Category to be effective 10/12/ 2011. Filed Date: 10/11/2011...

Physics 3204. Course Description.

Science.gov (United States)

Newfoundland and Labrador Dept. of Education.

A description of the physics 3204 course in Newfoundland and Labrador is provided. The description includes: (1) statement of purpose, including general objectives of science education; (2) a list of six course objectives; (3) course content for units on sound, light, optical instruments, electrostatics, current electricity, Michael Faraday and…

Simulation Experiment Description Markup Language (SED-ML) Level 1 Version 2.

Science.gov (United States)

Bergmann, Frank T; Cooper, Jonathan; Le Novère, Nicolas; Nickerson, David; Waltemath, Dagmar

2015-09-04

The number, size and complexity of computational models of biological systems are growing at an ever increasing pace. It is imperative to build on existing studies by reusing and adapting existing models and parts thereof. The description of the structure of models is not sufficient to enable the reproduction of simulation results. One also needs to describe the procedures the models are subjected to, as recommended by the Minimum Information About a Simulation Experiment (MIASE) guidelines. This document presents Level 1 Version 2 of the Simulation Experiment Description Markup Language (SED-ML), a computer-readable format for encoding simulation and analysis experiments to apply to computational models. SED-ML files are encoded in the Extensible Markup Language (XML) and can be used in conjunction with any XML-based model encoding format, such as CellML or SBML. A SED-ML file includes details of which models to use, how to modify them prior to executing a simulation, which simulation and analysis procedures to apply, which results to extract and how to present them. Level 1 Version 2 extends the format by allowing the encoding of repeated and chained procedures.

The devil is in the detail: children's recollection of details about their prior experiences.

Science.gov (United States)

Strange, Deryn; Hayne, Harlene

2013-01-01

Adults sometimes report highly specific details of childhood events, including the weather, what they or others were wearing, as well as information about what they or others said or were thinking at the time. When these details are reported in the course of research they shape our theories of memory development; when they are reported in a criminal trial they influence jurors' evaluation of guilt or innocence. The key question is whether these details were encoded at the time the event took place or have been added after the fact. We addressed this question prospectively by examining the memory accounts of children. In Experiment 1 we coded the reports of 5- to 6-year-olds and 9- to 10-year-olds who had experienced a unique event. We found that spontaneous mentions of these specific details were exceedingly rare. In Experiment 2 we questioned additional children about a similar event using specific questions to extract those details. We found that 9- to 10-year-olds were able to accurately answer, while 5- to 6-year-olds had considerable difficulty. Moreover, when the younger children did respond they provided generic, forensically inadequate, information. These data have important implications for the courtroom and for current theories of memory development and childhood amnesia.

BWR Full Integral Simulation Test (FIST) program: facility description report

International Nuclear Information System (INIS)

Stephens, A.G.

1984-09-01

A new boiling water reactor safety test facility (FIST, Full Integral Simulation Test) is described. It will be used to investigate small breaks and operational transients and to tie results from such tests to earlier large-break test results determined in the TLTA. The new facility's full height and prototypical components constitute a major scaling improvement over earlier test facilities. A heated feedwater system, permitting steady-state operation, and a large increase in the number of measurements are other significant improvements. The program background is outlined and program objectives defined. The design basis is presented together with a detailed, complete description of the facility and measurements to be made. An extensive component scaling analysis and prediction of performance are presented

Author Details

African Journals Online (AJOL)

NENTY, N. JOHNSON. Vol 7, No 3 (2001) - Articles Common errors and perfomance of students in junior secondary mathematics certificate examinations in Cross River State, Nigeria Details PDF. ISSN: 1118-0579. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's ...

Author Details

African Journals Online (AJOL)

QUAKYI, A.I.. Vol 2 (2002): Supplement - Articles A Longitudinal Study of the Role of T Cell subset, Th1/Th2 cytokines and antiplasmodial antibodies in uncomplicated Malaria in a Village Population Chronically Exposed to Plasmodium falciparum Malaria. Details PDF · AJOL African Journals Online. HOW TO USE AJOL.

Author Details

African Journals Online (AJOL)

Admasu, Assefa. Vol 22, No 2 (1999) - Articles Preliminary evaluation of Phytomyza orobanchia (Diptera: Agromyzidae) as a controller of Orobanche spp in Ethiopia Details PDF. ISSN: 2520–7997. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL ...

Author Details

African Journals Online (AJOL)

Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Obtaining the green's function for electromagnetic waves propagating in layered in-homogeneous thin film media of spherical particles on a substrate. Abstract · Vol 20, No 2 (2008) - Articles solution growth and ...

Author Details

African Journals Online (AJOL)

Lema, VM. Vol 80, No 9 (2003): - Articles Fournier's gangrene complicating vasectomy. Details PDF · Vol 86, No 6 (2009) - Articles Therapeutic misconception and clinical trials in sub-saharan Africa: A review. Abstract PDF · Vol 86, No 11 (2009) - Articles HIV/AIDS and pregnancy-related deaths in Blantyre, Malawi

Author Details

African Journals Online (AJOL)

Motabagani, MA. Vol 80, No 9 (2003): - Articles Anomalies of the renal, phrenic and suprarenal arteries: Case Report Details PDF · Vol 81, No 3 (2004): - Articles Morphological study of the uncommon rectus sterni muscle in German cadavers. Abstract PDF. ISSN: 0012-835X. AJOL African Journals Online. HOW TO USE ...

Author Details

African Journals Online (AJOL)

Ibeabuchi, NM. Vol 10, No 3 (2000) - Articles Comparison of the effects of Methylsalicylate Cream with cryotherapy on delayed onset muscle soreness. Details · Vol 22, No 2 (2012) - Articles X-ray Pelvimetry And Labour Outcome In Term Pregnancy In A Rural Nigerian Population Abstract. ISSN: 0189-2657. AJOL African ...

Summary of Country Reports Submitted to the Energy Efficiency Working Party: October 2011

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

The purpose of this summary report is to highlight energy efficiency policy action and planning in IEA member countries submited to the Energy Efficiency Working Party (EEWP) from March to September 2011.

Privacy Act System of Records: Invention Reports Submitted to the EPA, EPA-38

Science.gov (United States)

Learn about the Invention Reports Submitted to the EPA System, including who is covered in the system, the purpose of data collection, routine uses for the system's records, and other security procedures.

Description of saturation curves and boiling process of dry air

Directory of Open Access Journals (Sweden)

Vestfálová Magda

2018-01-01

Full Text Available Air is a mixture of gases forming the gas wrap of Earth. It is formed by dry air, moisture and other pollutants. Dry air is a substance whose thermodynamic properties in gaseous state, as well as the thermodynamic properties of its main constituents in gaseous state, are generally known and described in detail in the literature. The liquid air is a bluish liquid and is industrially used to produce oxygen, nitrogen, argon and helium by distillation. The transition between the gaseous and liquid state (the condensation process, resp. boiling process, is usually displayed in the basic thermodynamic diagrams using the saturation curves. The saturation curves of all pure substances are of a similar shape. However, since the dry air is a mixture, the shapes of its saturation curves are modified relative to the shapes corresponding to the pure substances. This paper deals with the description of the dry air saturation curves as a mixture, i.e. with a description of the process of phase change of dry air (boiling process. The dry air saturation curves are constructed in the basic thermodynamic charts based on the values obtained from the literature. On the basis of diagrams, data appearing in various publications are interpreted and put into context with boiling process of dry air.

A descriptive review of qualitative studies in first episode psychosis.

Science.gov (United States)

Boydell, Katherine M; Stasiulis, Elaine; Volpe, Tiziana; Gladstone, Brenda

2010-02-01

The aim of this paper is to provide a descriptive review of published qualitative research studies on first episode psychosis (FEP). A review was undertaken to describe the findings of qualitative studies in early psychosis. Keyword searches in Medline, CINAHL, ASSIA, PsychINFO databases, as well as manual searches of other relevant journals and reference lists of primary papers, were conducted. Thirty-one qualitative papers (representing 27 discrete studies) were identified. The majority reported research concerning young people based in community settings. The research studies were organized according to the following generic social processes: (i) achieving identity; (ii) acquiring perspectives; (iii) doing activity; and, (iv) experiencing relationships. The papers reviewed are based on first-person accounts obtained from individuals who have experienced FEP, their family members and service providers. This descriptive review contributes to our understanding of the complex social processes of achieving identity, acquiring perspectives, doing activities and developing relationships as experienced by young people and the significant others in their world. The cumulative findings highlight the contextually rich and detailed information made possible through qualitative studies of FEP. They begin to account for the active engagement of individuals affected by psychosis in making sense of their experience and suggest that this experience should be understood from within young people's own framework of meaning.

Rectal dose assessment in patients submitted to high-dose-rate brachytherapy for uterine cervix cancer

International Nuclear Information System (INIS)

Oliveira, Jetro Pereira de; Batista, Delano Valdivino Santos; Bardella, Lucia Helena; Carvalho, Arnaldo Rangel

2009-01-01

Objective: The present study was aimed at developing a thermoluminescent dosimetric system capable of assessing the doses delivered to the rectum of patients submitted to high-dose-rate brachytherapy for uterine cervix cancer. Materials and methods: LiF:Mg,Ti,Na powder was the thermoluminescent material utilized for evaluating the rectal dose. The powder was divided into small portions (34 mg) which were accommodated in a capillary tube. This tube was placed into a rectal probe that was introduced into the patient's rectum. Results: The doses delivered to the rectum of six patients submitted to high-dose-rate brachytherapy for uterine cervix cancer evaluated by means of thermoluminescent dosimeters presented a good agreement with the planned values based on two orthogonal (anteroposterior and lateral) radiographic images of the patients. Conclusion: The thermoluminescent dosimetric system developed in the present study is simple and easy to be utilized as compared to other rectal dosimetry methods. The system has shown to be effective in the evaluation of rectal doses in patients submitted to high-dose-rate brachytherapy for uterine cervix cancer. (author)

77 FR 42314 - Proposed Data Collections Submitted for Public Comment and Recommendations

Science.gov (United States)

2012-07-18

... characteristics of the work environment, such as the norms, rules, and common understandings that influence employees' perceptions of the importance that the organization places on safety. NIOSH requests OMB approval...] Proposed Data Collections Submitted for Public Comment and Recommendations In compliance with the...

75 FR 33614 - Adequacy Status of the Submitted 2009 PM2.5

Science.gov (United States)

2010-06-14

... that transportation activities will not produce new air quality violations, worsen existing violations... the Submitted 2009 PM 2.5 Motor Vehicle Emission Budgets for Transportation Conformity Purposes for..., PM 2.5 nonattainment areas to be adequate for transportation conformity purposes. The transportation...

Author Details

African Journals Online (AJOL)

Brown, Duncan. Vol 16, No 2 (2002): Continental Africans & the Question of Identity - Articles Environment and Identity: Douglas Livingstone's A Littoral Zone Details. ISSN: 0256-004. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

Author Details

African Journals Online (AJOL)

SONUGA, F A. Vol 6, No 1 (2000) - Articles Geophysical investigation of Karkarku earthdam embankment. Details. ISSN: 1118-0579. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL ...

Author Details

African Journals Online (AJOL)

Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Vol 8 (2004) - Articles Further on stokes expansions for the finite amplitude water waves. Abstract · Vol 11 (2007) - Articles On the effects of wave steepness on higher order Stokes waves. Abstract. ISSN: 1116-4336.

Author Details

African Journals Online (AJOL)

Focho, DA. Vol 2, No 1 (2002) - Articles Observations on the Meiotic Process in the African Pest Grasshopper Taphronota thaelephora Stal. (Orthoptera : Pyrgomorphidae) Details PDF · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

76 FR 59672 - Combined Notice of Filings (September 19, 2011)

Science.gov (United States)

2011-09-27

... Natural Gas Company, LLC. Description: Southern Natural Gas Company, L.L.C. submits tariff filing per 154... Policies. Filed Date: 09/14/2011. Accession Number: 20110914-5143. Comment Date: 5 p.m. Eastern Time on.... Description: Midcontinent Express Pipeline LLC submits tariff filing per 154.204: Filing to Remove Expired...

76 FR 62791 - Combined Notice of Filings #2

Science.gov (United States)

2011-10-11

...: 5 p.m. Eastern Time on Wednesday, October 19, 2011. Docket Numbers: ER11-4657-000. Applicants: Apple Group. Description: Apple Group submits tariff filing per 35.1: Apple Group Baseline Tariff to be...Ener Power Watch, LLC. Description: NaturEner Power Watch, LLC submits tariff filing per 35.1: Baseline...

Nuclear Power Station Kalkar, 300 MWe Prototype Nuclear Power Plant with Fast Sodium Cooled Reactor (SNR-300), Plant description

International Nuclear Information System (INIS)

1984-06-01

The nuclear power station Kalkar (SNR-300) is a prototype with a sodium cooled fast reactor and a thermal power of 762 MW. The present plant description has been made available in parallel to the licensing procedure for the reactor plant and its core Mark-Ia as supplementary information for the public. The report gives a detailed description of the whole plant including the prevention measures against the impact of external and plant internal events. The radioactive materials within the reactor cooling system and the irradiation protection and surveillance measures are outlined. Finally, the operation of the plant is described with the start-up procedures, power operation, shutdown phases with decay heat removal and handling procedures

Monte Carlo methods beyond detailed balance

NARCIS (Netherlands)

Schram, Raoul D.; Barkema, Gerard T.|info:eu-repo/dai/nl/101275080

2015-01-01

Monte Carlo algorithms are nearly always based on the concept of detailed balance and ergodicity. In this paper we focus on algorithms that do not satisfy detailed balance. We introduce a general method for designing non-detailed balance algorithms, starting from a conventional algorithm satisfying

Author Details

African Journals Online (AJOL)

McCarthy, Greg. Vol 15, No 1 (2001): Media Freedom and Human Rights - Articles Caught between Empires: Ambivalence in Australian Films Details. ISSN: 0256-004. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and ...

Author Details

African Journals Online (AJOL)

Ligthelm, A.A.. Vol 5, No 2 (2001) - Articles Community attitudes towards Casinos and the estimated magnitude of problem gambling The Mpumalanga case. Details PDF. ISSN: 1027-4332. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

Author Details

African Journals Online (AJOL)

Comarof, Jean. Vol 1999, No 3-4 (1999) - Articles Alien-Nation: Zombies, Immigrants and Millennial Capitalism Details. ISSN: 0850-8712. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact ...

Author Details

African Journals Online (AJOL)

Njubi, Francis. Vol 15, No 1 (2001): Media Freedom and Human Rights - Articles New Media, Old Struggles: Pan Africanism, Anti-racism and Information Technology Details. ISSN: 0256-004. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

Author Details

African Journals Online (AJOL)

Journal Home > Advanced Search > Author Details. Log in or Register to get access to full text downloads. ... Okeke, EO. Vol 10 (2006) - Articles Analysis of Stokes waves theory as a diffusion problem. Abstract · Vol 11 (2007) - Articles On the impact of wave-current on Stokes waves. Abstract. ISSN: 1116-4336. AJOL African ...

Author Details

African Journals Online (AJOL)

Love, Alison. Vol 29, No 2 (2002) - Articles Policy-makers, the Press and Politics: Reporting a Public Policy Document Details. ISSN: 0379-0622. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use ...

Author Details

African Journals Online (AJOL)

Idowu, OO. Vol 8, No 1 (2003) - Articles Evaluation of Different Substrates and Combinations on the Growth of Pleurotus pulmonarius (Fries) Quelet (Sajor-caju) Details. ISSN: 1118-2733. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's ...

Author Details

African Journals Online (AJOL)

Odigie, IP. Vol 10, No 4 (2000) - Articles High dose vitamin E administration attenuates hypertensin in 2-Kidney 1 Clip Goldblatt hypertensive rats. Details. ISSN: 0189-2657. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms ...

Author Details

African Journals Online (AJOL)

Warnorff, DK. Vol 13, No 4 (2001) - Articles Development of a scoring system for the diagnosis of tuberculous lymphadenitis. Details PDF. ISSN: 1995-7262. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions ...

Generalizing: The descriptive struggle

Directory of Open Access Journals (Sweden)

Barney G. Glaser, Ph.D.; Hon Ph.D.

2006-11-01

Full Text Available The literature is not kind to the use of descriptive generalizations. Authors struggle and struggle to find and rationalize a way to use them and then fail in spite of trying a myriad of work-arounds. And then we have Lincoln and Guba’s famous statement: “The only generalization is: there is no generalization” in referring to qualitative research. (op cit, p. 110 They are referring to routine QDA yielding extensive descriptions, but which tacitly include conceptual generalizations without any real thought of knowledge about them. In this chapter I wish to explore this struggle for the purpose of explaining that the various contra arguments to using descriptive generalizations DO NOT apply to the ease of using conceptual generalizations yielded in SGT and especially FGT. I will not argue for the use of descriptive generalization. I agree with Lincoln and Guba with respect to QDA, “the only generalization is: there is no generalization.” It is up to the QDA methodologists, of whom there are many; to continue the struggle and I wish them well.

75 FR 1790 - Proposed Data Collections Submitted for Public Comment and Recommendations

Science.gov (United States)

2010-01-13

... projected needs for training. NCHS also asks individual candidates for training to submit an application... respondents, including through the use of automated collection techniques or other forms of information... Statistics Training Application, (OMB No. 0920-0217 exp. 7/ 31/2010)--Extension--National Center for Health...

Sequence Coding and Search System for licensee event reports: user's guide. Volume 1, Revision 1

International Nuclear Information System (INIS)

Greene, N.M.; Mays, G.T.; Johnson, M.P.

1985-04-01

Operating experience data from nuclear power plants are essential for safety and reliability analyses, especially analyses of trends and patterns. The licensee event reports (LERs) that are submitted to the Nuclear Regulatory Commission (NRC) by the nuclear power plant utilities contain much of this data. The NRC's Office for Analysis and Evaluation of Operational Data (AEOD) has developed, under contract with NSIC, a system for codifying the events reported in the LERs. The primary objective of the Sequence Coding and Search System (SCSS) is to reduce the descriptive text of the LERs to coded sequences that are both computer-readable and computer-searchable. This system provides a structured format for detailed coding of component, system, and unit effects as well as personnel errors. The database contains all current LERs submitted by nuclear power plant utilities for events occurring since 1981 and is updated on a continual basis. This four volume report documents and describes SCSS in detail. Volume 1 is a User's Guide for searching the SCSS database. This volume contains updated material through February 1985 of the working version of ORNL/NSIC-223, Vol. 1

Detailed algorithmic description of a processor: a recipe for ...

African Journals Online (AJOL)

International Journal of Natural and Applied Sciences ... a simple developed compiler could generate the code of a simple programming language. ... It should be noted that such code generation must be done on a particular processor- for ...

Detailed transcriptome description of the neglected cestode Taenia multiceps.

Science.gov (United States)

Wu, Xuhang; Fu, Yan; Yang, Deying; Zhang, Runhui; Zheng, Wanpeng; Nie, Huaming; Xie, Yue; Yan, Ning; Hao, Guiying; Gu, Xiaobin; Wang, Shuxian; Peng, Xuerong; Yang, Guangyou

2012-01-01

The larval stage of Taenia multiceps, a global cestode, encysts in the central nervous system (CNS) of sheep and other livestock. This frequently leads to their death and huge socioeconomic losses, especially in developing countries. This parasite can also cause zoonotic infections in humans, but has been largely neglected due to a lack of diagnostic techniques and studies. Recent developments in next-generation sequencing provide an opportunity to explore the transcriptome of T. multiceps. We obtained a total of 31,282 unigenes (mean length 920 bp) using Illumina paired-end sequencing technology and a new Trinity de novo assembler without a referenced genome. Individual transcription molecules were determined by sequence-based annotations and/or domain-based annotations against public databases (Nr, UniprotKB/Swiss-Prot, COG, KEGG, UniProtKB/TrEMBL, InterPro and Pfam). We identified 26,110 (83.47%) unigenes and inferred 20,896 (66.8%) coding sequences (CDS). Further comparative transcripts analysis with other cestodes (Taenia pisiformis, Taenia solium, Echincoccus granulosus and Echincoccus multilocularis) and intestinal parasites (Trichinella spiralis, Ancylostoma caninum and Ascaris suum) showed that 5,100 common genes were shared among three Taenia tapeworms, 261 conserved genes were detected among five Taeniidae cestodes, and 109 common genes were found in four zoonotic intestinal parasites. Some of the common genes were genes required for parasite survival, involved in parasite-host interactions. In addition, we amplified two full-length CDS of unigenes from the common genes using RT-PCR. This study provides an extensive transcriptome of the adult stage of T. multiceps, and demonstrates that comparative transcriptomic investigations deserve to be further studied. This transcriptome dataset forms a substantial public information platform to achieve a fundamental understanding of the biology of T. multiceps, and helps in the identification of drug targets and parasite-host interaction studies.

MO-A-BRC-02: TG167 Report - Detailed Description

Energy Technology Data Exchange (ETDEWEB)

Rivard, M.

2016-06-15

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used to evaluate innovative radiotherapy devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining equivalence of the innovative device to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of an innovative brachytherapy device or application is a critical part in which physicists are actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative products or applications and includes evaluation of 1) dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, 2) risks and benefits from regulatory and safety perspectives, and 3) resource assessment and preparedness. Further, calibration methods should be traceable to a primary standards dosimetry laboratory such as NIST in the U.S. or to other primary standards dosimetry laboratory located elsewhere. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the ADCLs is encouraged before a source is introduced into widespread routine clinical use. The AAPM and GEC-ESTRO have developed guidelines for the safe and consistent application of brachytherapy using innovative brachytherapy devices and applications. The current report covers regulatory approvals, calibration, dose calculations, radiobiological issues, and overall safety concerns that should be addressed during the commissioning stage preceding clinical use. These guidelines are based on review of requirements of the U.S. NRC, FDA, Department of Transportation, International Electrotechnical Commission Medical Electrical Equipment Standard 60601, European Commission for CE Marking, and institutional review boards and radiation safety committees. Learning Objectives: Understand the necessary dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use. Evaluate risks and benefits from regulatory and safety perspectives. Identify necessary resources and create a plan for clinical introduction of innovative brachytherapy device or applications. Consultant for Theragenics Corp.; R. Nath, Consultant to Theragenics Corp.

Detailed transcriptome description of the neglected cestode Taenia multiceps.

Directory of Open Access Journals (Sweden)

Xuhang Wu

Full Text Available BACKGROUND: The larval stage of Taenia multiceps, a global cestode, encysts in the central nervous system (CNS of sheep and other livestock. This frequently leads to their death and huge socioeconomic losses, especially in developing countries. This parasite can also cause zoonotic infections in humans, but has been largely neglected due to a lack of diagnostic techniques and studies. Recent developments in next-generation sequencing provide an opportunity to explore the transcriptome of T. multiceps. METHODOLOGY/PRINCIPAL FINDINGS: We obtained a total of 31,282 unigenes (mean length 920 bp using Illumina paired-end sequencing technology and a new Trinity de novo assembler without a referenced genome. Individual transcription molecules were determined by sequence-based annotations and/or domain-based annotations against public databases (Nr, UniprotKB/Swiss-Prot, COG, KEGG, UniProtKB/TrEMBL, InterPro and Pfam. We identified 26,110 (83.47% unigenes and inferred 20,896 (66.8% coding sequences (CDS. Further comparative transcripts analysis with other cestodes (Taenia pisiformis, Taenia solium, Echincoccus granulosus and Echincoccus multilocularis and intestinal parasites (Trichinella spiralis, Ancylostoma caninum and Ascaris suum showed that 5,100 common genes were shared among three Taenia tapeworms, 261 conserved genes were detected among five Taeniidae cestodes, and 109 common genes were found in four zoonotic intestinal parasites. Some of the common genes were genes required for parasite survival, involved in parasite-host interactions. In addition, we amplified two full-length CDS of unigenes from the common genes using RT-PCR. CONCLUSIONS/SIGNIFICANCE: This study provides an extensive transcriptome of the adult stage of T. multiceps, and demonstrates that comparative transcriptomic investigations deserve to be further studied. This transcriptome dataset forms a substantial public information platform to achieve a fundamental understanding of the biology of T. multiceps, and helps in the identification of drug targets and parasite-host interaction studies.

MO-A-BRC-02: TG167 Report - Detailed Description

International Nuclear Information System (INIS)

Rivard, M.

2016-01-01

Although a multicenter, Phase III, prospective, randomized trial is the gold standard for evidence-based medicine, it is rarely used to evaluate innovative radiotherapy devices because of many practical and ethical reasons. It is usually sufficient to compare the dose distributions and dose rates for determining equivalence of the innovative device to an existing one. Thus, quantitative evaluation of the dosimetric characteristics of an innovative brachytherapy device or application is a critical part in which physicists are actively involved. The physicist’s role, along with physician colleagues, in this process is highlighted for innovative products or applications and includes evaluation of 1) dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use, 2) risks and benefits from regulatory and safety perspectives, and 3) resource assessment and preparedness. Further, calibration methods should be traceable to a primary standards dosimetry laboratory such as NIST in the U.S. or to other primary standards dosimetry laboratory located elsewhere. Clinical users should follow standards as approved by their country’s regulatory agencies that approved such a brachytherapy device. Integration of this system into the medical source calibration infrastructure of secondary standard dosimetry laboratories such as the ADCLs is encouraged before a source is introduced into widespread routine clinical use. The AAPM and GEC-ESTRO have developed guidelines for the safe and consistent application of brachytherapy using innovative brachytherapy devices and applications. The current report covers regulatory approvals, calibration, dose calculations, radiobiological issues, and overall safety concerns that should be addressed during the commissioning stage preceding clinical use. These guidelines are based on review of requirements of the U.S. NRC, FDA, Department of Transportation, International Electrotechnical Commission Medical Electrical Equipment Standard 60601, European Commission for CE Marking, and institutional review boards and radiation safety committees. Learning Objectives: Understand the necessary dosimetric considerations for clinical implementation (including calibrations, dose calculations, and radiobiological aspects) to comply with existing societal dosimetric prerequisites for sources in routine clinical use. Evaluate risks and benefits from regulatory and safety perspectives. Identify necessary resources and create a plan for clinical introduction of innovative brachytherapy device or applications. Consultant for Theragenics Corp.; R. Nath, Consultant to Theragenics Corp.

Overview of cooperative international piping benchmark analyses

International Nuclear Information System (INIS)

McAfee, W.J.

1982-01-01

This paper presents an overview of an effort initiated in 1976 by the International Working Group on Fast Reactors (IWGFR) of the International Atomic Energy Agency (IAEA) to evaluate detailed and simplified inelastic analysis methods for piping systems with particular emphasis on piping bends. The procedure was to collect from participating member IAEA countries descriptions of tests and test results for piping systems or bends (with emphasis on high temperature inelastic tests), to compile, evaluate, and issue a selected number of these problems for analysis, and to compile and make a preliminary evaluation of the analyses results. Of the problem descriptions submitted three were selected to be used: a 90 0 -elbow at 600 0 C with an in-plane transverse force; a 90 0 -elbow with an in-plane moment; and a 180 0 -elbow at room temperature with a reversed, cyclic, in-plane transverse force. A variety of both detailed and simplified analysis solutions were obtained. A brief comparative assessment of the analyses is contained in this paper. 15 figures

Descriptive osteology of Paracobitis iranica Nalbant and Bianco, 1998 (Cypriniformes, Nemacheilidae) from Namak Lake basin of Iran

OpenAIRE

EAGDERI, Soheil; NIKMEHR, Nasrin

2016-01-01

This study was carried out to describe the osteological structure of Iranian crested loach, Paracobitis iranica, Nalbant and Bianco, 1998 an Iranian endemic loach species. For this purpose, ten specimens of P. Iranica were collected from the Qom River. After clearing and staining, its osteological characteristics were examined and a detailed description of its skeletal structure was provided. The results revealed that P .iranica can be distinguished from other members of the family Nemacheili...

Confidence assessment. Site-descriptive modelling SDM-Site Laxemar

International Nuclear Information System (INIS)

2009-06-01

The objective of this report is to assess the confidence that can be placed in the Laxemar site descriptive model, based on the information available at the conclusion of the surface-based investigations (SDM-Site Laxemar). In this exploration, an overriding question is whether remaining uncertainties are significant for repository engineering design or long-term safety assessment and could successfully be further reduced by more surface-based investigations or more usefully by explorations underground made during construction of the repository. Procedures for this assessment have been progressively refined during the course of the site descriptive modelling, and applied to all previous versions of the Forsmark and Laxemar site descriptive models. They include assessment of whether all relevant data have been considered and understood, identification of the main uncertainties and their causes, possible alternative models and their handling, and consistency between disciplines. The assessment then forms the basis for an overall confidence statement. The confidence in the Laxemar site descriptive model, based on the data available at the conclusion of the surface based site investigations, has been assessed by exploring: - Confidence in the site characterization data base, - remaining issues and their handling, - handling of alternatives, - consistency between disciplines and - main reasons for confidence and lack of confidence in the model. Generally, the site investigation database is of high quality, as assured by the quality procedures applied. It is judged that the Laxemar site descriptive model has an overall high level of confidence. Because of the relatively robust geological model that describes the site, the overall confidence in the Laxemar Site Descriptive model is judged to be high, even though details of the spatial variability remain unknown. The overall reason for this confidence is the wide spatial distribution of the data and the consistency between

Confidence assessment. Site-descriptive modelling SDM-Site Laxemar

Energy Technology Data Exchange (ETDEWEB)

2008-12-15

The objective of this report is to assess the confidence that can be placed in the Laxemar site descriptive model, based on the information available at the conclusion of the surface-based investigations (SDM-Site Laxemar). In this exploration, an overriding question is whether remaining uncertainties are significant for repository engineering design or long-term safety assessment and could successfully be further reduced by more surface-based investigations or more usefully by explorations underground made during construction of the repository. Procedures for this assessment have been progressively refined during the course of the site descriptive modelling, and applied to all previous versions of the Forsmark and Laxemar site descriptive models. They include assessment of whether all relevant data have been considered and understood, identification of the main uncertainties and their causes, possible alternative models and their handling, and consistency between disciplines. The assessment then forms the basis for an overall confidence statement. The confidence in the Laxemar site descriptive model, based on the data available at the conclusion of the surface based site investigations, has been assessed by exploring: - Confidence in the site characterization data base, - remaining issues and their handling, - handling of alternatives, - consistency between disciplines and - main reasons for confidence and lack of confidence in the model. Generally, the site investigation database is of high quality, as assured by the quality procedures applied. It is judged that the Laxemar site descriptive model has an overall high level of confidence. Because of the relatively robust geological model that describes the site, the overall confidence in the Laxemar Site Descriptive model is judged to be high, even though details of the spatial variability remain unknown. The overall reason for this confidence is the wide spatial distribution of the data and the consistency between

First paper from Tevatron Run II submitted by CDF collaboration

CERN Multimedia

2003-01-01

"Scientists of the Collider Detector at Fermilab submitted today (March 19) the first scientific publication of Collider Run II to the science journal Physical Review D. The paper titled "Measurement of the Mass Difference m(Ds+)-m(D+) at CDF II" summarizes the results of an analysis carried out by CDF scientists Christoph Paus and Ivan Furic, MIT, describing the mass measurement of particles containing charm quarks" (1 page).

Content of system design descriptions

International Nuclear Information System (INIS)

1998-10-01

A System Design Description (SDD) describes the requirements and features of a system. This standard provides guidance on the expected technical content of SDDs. The need for such a standard was recognized during efforts to develop SDDs for safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Existing guidance related to the corresponding documents in other industries is generally not suitable to meet the needs of DOE nuclear facilities. Across the DOE complex, different contractors have guidance documents, but they vary widely from site to site. While such guidance documents are valuable, no single guidance document has all the attributes that DOE considers important, including a reasonable degree of consistency or standardization. This standard is a consolidation of the best of the existing guidance. This standard has been developed with a technical content and level of detail intended to be most applicable to safety systems at DOE Hazard Category 2 nonreactor nuclear facilities. Notwithstanding that primary intent, this standard is recommended for other systems at such facilities, especially those that are important to achieving the programmatic mission of the facility. In addition, application of this standard should be considered for systems at other facilities, including non-nuclear facilities, on the basis that SDDs may be beneficial and cost-effective

76 FR 45790 - Combined Notice of Filings #1

Science.gov (United States)

2011-08-01

...: ER11-4053-000. Applicants: Southwest Power Pool, Inc. Description: Southwest Power Pool, Inc. submits tariff filing per 35.13(a)(2)(iii): Submission of Revisions to SPS Pricing Zone Rate to be effective 5/15.... Description: FirstEnergy Solutions Corp. submits tariff filing per 35: Revised Market-Based Rate Power Sales...

Author Details

African Journals Online (AJOL)

EKPA, O. D.. Vol 7, No 2 (2001) - Articles Variental differences AND polymorphism in palm oil: a case study of palm oils blended with coconut oil. Details PDF. ISSN: 1118-0579. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners ...

Author Details

African Journals Online (AJOL)

Kioni, P N. Vol 9, No 1 (2007) - Articles Detailed structure of pipe flow with water hammer oscillations. Abstract. ISSN: 1561-7645. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL ...

Author Details

African Journals Online (AJOL)

Legwaila, GM. Vol 12 (2003) - Articles Review of sweet sorghum: a potential cash and forage crop in Botswana Details. ISSN: 1021-0873. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact ...

Author Details

African Journals Online (AJOL)

Akum, ZE. Vol 1, No 3 (2001) - Articles Basic home range characteristics for the conservation of the African grey parrot in the Korup national park, Cameroon Details PDF · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms ...

Author Details

African Journals Online (AJOL)

Bobcokono, Irene Yatabene. Vol 1, No 1 (2001) - Articles Utilisation du papier filtre dans la gestion de programme de lute contre le SIDA au Cameroun Details PDF · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and ...