WorldWideScience

Sample records for submerged journal bearing

  1. Journal bearing

    Science.gov (United States)

    Menke, John R.; Boeker, Gilbert F.

    1976-05-11

    1. An improved journal bearing comprising in combination a non-rotatable cylindrical bearing member having a first bearing surface, a rotatable cylindrical bearing member having a confronting second bearing surface having a plurality of bearing elements, a source of lubricant adjacent said bearing elements for supplying lubricant thereto, each bearing element consisting of a pair of elongated relatively shallowly depressed surfaces lying in a cylindrical surface co-axial with the non-depressed surface and diverging from one another in the direction of rotation and obliquely arranged with respect to the axis of rotation of said rotatable member to cause a flow of lubricant longitudinally along said depressed surfaces from their distal ends toward their proximal ends as said bearing members are rotated relative to one another, each depressed surface subtending a radial angle of less than 360.degree., and means for rotating said rotatable bearing member to cause the lubricant to flow across and along said depressed surfaces, the flow of lubricant being impeded by the non-depressed portions of said second bearing surface to cause an increase in the lubricant pressure.

  2. Heuristic explanation of journal bearing instability

    Science.gov (United States)

    Crandall, S. H.

    1982-01-01

    A fluid-filled journal bearing is viewed as a powerful pump circulating fluid around the annular space between the journal and the bearing. A small whirling motion of the journal generates a wave of thickness variation progressing around the channel. The hypothesis that the fluid flow drives the whirl whenever the mean of the pumped fluid velocity is greater than the peripheral speed of the thickness variation wave is discussed and compared with other simple explanations of journal bearing instability. It is shown that for non-cavitation long bearings the hypothesis predicts instability onset correctly for unloaded bearings but gradually overpredicts the onset speed as the load is increased.

  3. Journal and Wave Bearing Impedance Calculation Software

    Science.gov (United States)

    Hanford, Amanda; Campbell, Robert

    2012-01-01

    The wave bearing software suite is a MALTA application that computes bearing properties for user-specified wave bearing conditions, as well as plain journal bearings. Wave bearings are fluid film journal bearings with multi-lobed wave patterns around the circumference of the bearing surface. In this software suite, the dynamic coefficients are outputted in a way for easy implementation in a finite element model used in rotor dynamics analysis. The software has a graphical user interface (GUI) for inputting bearing geometry parameters, and uses MATLAB s structure interface for ease of interpreting data. This innovation was developed to provide the stiffness and damping components of wave bearing impedances. The computational method for computing bearing coefficients was originally designed for plain journal bearings and tilting pad bearings. Modifications to include a wave bearing profile consisted of changing the film thickness profile given by an equation, and writing an algorithm to locate the integration limits for each fluid region. Careful consideration was needed to implement the correct integration limits while computing the dynamic coefficients, depending on the form of the input/output variables specified in the algorithm.

  4. 49 CFR 230.102 - Tender plain bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender plain bearing journal boxes. 230.102... Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes... expected to damage the bearing; or have a detrimental effect on the lubrication of the journal and bearing...

  5. Vapor Cavitation in Dynamically Loaded Journal Bearings

    Science.gov (United States)

    Jacobson, B. O.; Hamrock, B. J.

    1983-01-01

    High speed motion camera experiments were performed on dynamically loaded journal bearings. The length to diameter ratio of the bearing, the speed of the roller and the tube, the surface material of the roller, and the static and dynamic eccentricity of the bearing were varied. One hundred and thirty-four cases were filmed. The occurrence of vapor cavitation was clearly evident in the films and figures presented. Vapor cavitation was found to occur when the tensile stress applied to the oil exceeded the tensile strength of the oil or the binding of the oil to the surface. The physical situation in which vapor cavitation occurs is during the squeezing and sliding motion within a bearing. Besides being able to accurately capture the vapor cavitation on film, an analysis of the formation and collapse of the cavitation bubbles and characteristics of the bubble content are presented.

  6. 49 CFR 230.103 - Tender roller bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender roller bearing journal boxes. 230.103... Locomotives and Tenders Running Gear § 230.103 Tender roller bearing journal boxes. Tender roller bearing journal boxes shall be maintained in a safe and suitable condition. ...

  7. Tribology experiment. [journal bearings and liquid lubricants

    Science.gov (United States)

    Wall, W. A.

    1981-01-01

    A two-dimensional concept for Spacelab rack 7 was developed to study the interaction of liquid lubricants and surfaces under static and dynamic conditions in a low-gravity environment fluid wetting and spreading experiments of a journal bearing experiments, and means to accurately measure and record the low-gravity environment during experimentation are planned. The wetting and spreading process of selected commercial lubricants on representative surface are to the observes in a near-zero gravity environment.

  8. Tribological Behavior of Journal Bearing Material under Different Lubricants

    Directory of Open Access Journals (Sweden)

    S. Baskar

    2014-06-01

    Full Text Available The friction and wear behavior of journal bearing material has been investigated using pin on disc wear tester with three different lubricating oils i.e. synthetic lubricating oil (SAE20W40, chemically modified rapeseed oil (CMRO, chemically modified rapeseed oil with Nano CuO. Wear tests were carried out at maximum load of 200 N and sliding speeds of 2 – 10 m/s. The results showed that the friction and wear behavior of the journal bearing material have changed according to the sliding conditions and lubricating oils. The journal bearing material has a lower friction coefficient for CMRO with Nano CuO than other two oils. Higher wear of journal bearing material was observed in SAE 20W40 and CMRO. Worn surfaces of the journal bearing material with three lubricating oils were examined using scanning electron microscope (SEM and wear mechanisms were discussed.

  9. On The Modeling Of Hybrid Aerostatic - Gas Journal Bearings

    DEFF Research Database (Denmark)

    Morosi, Stefano; Santos, Ilmar

    2010-01-01

    of a compressible fluid film journal bearing. Control forces are generated by injecting pressurized air into the bearing gap through orifices located on the bearing walls. A modified form of the compressible Reynolds equation for active lubrication is derived. By solving this equation, stiffness and damping......Gas journal bearing have been increasingly adopted in modern turbo-machinery applications, as they meet the demands of operation at higher rotational speeds, in clean environment and great efficiency. Due to the fact that gaseous lubricants, typically air, have much lower viscosity than more...

  10. On The Modelling Of Hybrid Aerostatic - Gas Journal Bearings

    DEFF Research Database (Denmark)

    Morosi, Stefano; Santos, Ilmar

    2011-01-01

    modeling for hybrid lubrication of a compressible fluid film journal bearing. Additional forces are generated by injecting pressurized air into the bearing gap through orifices located on the bearing walls. A modified form of the compressible Reynolds equation for active lubrication is derived. By solving......Gas journal bearing have been increasingly adopted in modern turbo-machinery applications, as they meet the demands of operation at higher rotational speeds, in clean environment and great efficiency. Due to the fact that gaseous lubricants, typically air, have much lower viscosity than more...

  11. Modelling of LEG tilting pad journal bearings with active lubrication

    DEFF Research Database (Denmark)

    Cerda Varela, Alejandro Javier; García, Asier Bengoechea; Santos, Ilmar

    2017-01-01

    This work constitutes the first step in a research effort aimed at studying the feasibility of introducing an active lubrication concept in tilting pad journal bearings (TPJBs) that feature the leading edge groove (LEG) lubrication system. The modification of the oil flow into each pad supply...... to portray the feasibility of affecting its static and dynamic properties by introducing this novel active bearing design....

  12. Evaluation of journal bearings characteristics using finite element ...

    African Journals Online (AJOL)

    Dynamic behavior of the rotor-bearings system exerts a considerable influence on rotating machine operating and stability. Indeed, vibrations in such machines may cause not only high level of noise but also wearing of moving components. Hydrodynamic journal bearings, which are among the best devices to prevent ...

  13. Non Linear Analysis on Multi Lobe Journal Bearings

    Science.gov (United States)

    Udaya Bhaskar, S.; Manzoor Hussian, M.; Yousuf Ali, Md.

    2017-08-01

    Multi lobe journal bearings are used in machines which operate at high speeds and high loads. In this paper the multi lobe bearing are analyzed to determine the effect of surface roughness during non linear loading. A non-linear time transient analysis is performed using the fourth order Runge Kutta method. The finite difference method is used to predict the pressure distribution over the bearing surface. The effect of eccentric ratio is studied and the variation of attitude angle is discussed. The journal center trajectories were calculated and plotted.

  14. Effect of shaft frequency on cavitation in a journal bearing for noncentered circular whirl

    Science.gov (United States)

    Brewe, David E.; Khonsari, M. M.

    The effect of shaft frequency on the performance of a submerged journal undergoing noncentered circular whirl is examined. The main emphasis of the paper is on the behavior of the vapor cavitation bubble and its effect on the bearing performance as a function of frequency. A cavitation algorithm due to Elrod was implemented in a computer program which solves a time-dependent Reynolds equation. This algorithm automatically handles the boundary conditions by using a switch function and a control volume approach which conserves mass throughout the entire flow. The shaft frequencies in this investigation ranged from 0 rad/s (squeeze-film damper) to -104 rad/s (a case in which oil-whip condition was produced momentarily). For the particular vibration amplitude chosen in this investigation it was observed that vapor cavitation had an effect on the load components for the full range of shaft frequencies investigated.

  15. A Dynamic Analysis of Hydrodynamic Wave Journal Bearings

    Science.gov (United States)

    Ene, Nicoleta M.; Dimofte, Florin; Keith, Theo G.

    2008-01-01

    The purpose of this paper is to study the dynamic behavior of a three-wave journal bearing using a transient approach. The transient analysis permits the determination of the rotor behavior after the fractional frequency whirl appears. The journal trajectory is determined by solving a set of nonlinear equations of motion using the Runge-Katta method. The fluid film forces are computed by integrating the transient Reynolds equation at each time step location of the shaft with respect to the bearing. Because of the large values of the rotational speeds, turbulent effects were included in the computations. The influence of the temperature on the viscosity was also considered. Numerical results were compared to experimenta1 results obtained at the NASA Glenn Research Center. Comparisons of the theoretical results with experimental data were found to be in good agreement. The numerical and experimental results showed that the fluid film of a three-wave journal bearing having a diameter of 30 mm, a length of 27 mm, and a wave amplitude ratio greater than 0.15 is stable even at rotational speeds of 60,000 RPM. For lower wave amplitude ratios, the threshold speed at which the fluid film becomes unstable depends on the wave amplitude and on the supply pocket pressure. Even if the fluid film is unstable, the wave bearing maintains the whirl orbit inside the bearing clearance.

  16. Design, Manufacture and Characterization of a Journal Bearing ...

    African Journals Online (AJOL)

    The paper examines the potential for the indigenous design and manufacture of laboratory equipment used for demonstrating the engineering principles of taught courses in our Engineering Schools. Using the Demonstration Journal Bearing as a case-study it is shown that imaginative modifications to classical design ...

  17. Compliant Foil Journal Bearing Performance at Alternate Pressures and Temperatures

    Science.gov (United States)

    Bruckner, Robert J.; Puleo, Bernadette J.

    2008-01-01

    An experimental test program has been conducted to determine the highly loaded performance of current generation gas foil bearings at alternate pressures and temperatures. Typically foil bearing performance has been reported at temperatures relevant to turbomachinery applications but only at an ambient pressure of one atmosphere. This dearth of data at alternate pressures has motivated the current test program. Two facilities were used in the test program, the ambient pressure rig and the high pressure rig. The test program utilized a 35 mm diameter by 27 mm long foil journal bearing having an uncoated Inconel X-750 top foil running against a shaft with a PS304 coated journal. Load capacity tests were conducted at 3, 6, 9, 12, 15, 18, and 21 krpm at temperatures from 25 to 500 C and at pressures from 0.1 to 2.5 atmospheres. Results show an increase in load capacity with increased ambient pressure and a reduction in load capacity with increased ambient temperature. Below one-half atmosphere of ambient pressure a dramatic loss of load capacity is experienced. Additional lightly loaded foil bearing performance in nitrogen at 25 C and up to 48 atmospheres of ambient pressure has also been reported. In the lightly loaded region of operation the power loss increases for increasing pressure at a fixed load. Knowledge of foil bearing performance at operating conditions found within potential machine applications will reduce program development risk of future foil bearing supported turbomachines.

  18. Optimum Groove Location of Hydrodynamic Journal Bearing Using Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    Lintu Roy

    2013-01-01

    Full Text Available This paper presents the various arrangements of grooving location of two-groove oil journal bearing for optimum performance. An attempt has been made to find out the effect of different configurations of two groove oil journal bearing by changing groove locations. Various groove angles that have been considered are 10°, 20°, and 30°. The Reynolds equation is solved numerically in a finite difference grid satisfying the appropriate boundary conditions. Determination of optimum performance is based on maximization of nondimensional load, flow coefficient, and mass parameter and minimization of friction variable using genetic algorithm. The results using genetic algorithm are compared with sequential quadratic programming (SQP. The two grooved bearings in general have grooves placed at diametrically opposite directions. However, the optimum groove locations, arrived at in the present work, are not diametrically opposite.

  19. The Effect of Non-Circular Bearing Shapes in Hydrodynamic Journal Bearings on the Vibration Behavior of Turbocharger Structures

    National Research Council Canada - National Science Library

    Lukas Bernhauser; Martin Heinisch; Markus Schörgenhumer; Manfred Nader

    2017-01-01

    ... engine acoustics development. This work presents an efficient modeling approach for the investigation, optimization, and design improvement of complex turbocharger rotors in hydrodynamic journal bearings...

  20. Characterization and measurement of hybrid gas journal bearings

    Science.gov (United States)

    Lawrence, Tom Marquis

    This thesis concentrates on the study of hybrid gas journal bearings (bearings with externally pressurized mass addition). It differs from most work in that it goes back to "basics" to explore the hydrodynamic phenomena in the bearing gap. The thesis compares geometrically identical bearings with 2 configurations of external pressurization, porous liners where mass-addition compensation is varied by varying the liner's permeability, and bushings with 2 rows of 6 feedholes where the mass-addition compensation is varied by the feedhole diameter. Experimentally, prototype bearings with mass-addition compensation that spans 2 orders of magnitude with differing clearances are built and their aerostatic properties and mass addition characteristics are thoroughly tested. The fundamental equations for compressible, laminar, Poiseuille flow are used to suggest how the mass flow "compensation" should be mathematically modeled. This is back-checked against the experimental mass flow measurements and is used to determine a mass-addition compensation parameter (called Kmeas) for each prototype bushing. In so doing, the methodology of modeling and measuring the mass addition in a hybrid gas bearing is re-examined and an innovative, practical, and simple method is found that makes it possible to make an "apples-to-apples" comparison between different configurations of external pressurization. This mass addition model is used in conjunction with the Reynolds equation to perform theory-based numerical analysis of virtual hybrid gas journal bearings (CFD experiments). The first CFD experiments performed use virtual bearings modeled to be identical to the experimental prototypes and replicate the experimental work. The results are compared and the CFD model is validated. The ontological significance of appropriate dimensionless similitude parameters is re-examined and a, previously lacking, complete set of similitude factors is found for hybrid bearings. A new practical method is

  1. Journal Bearings Lubrication Aspect Analysis Using Non-Newtonian Fluids

    Directory of Open Access Journals (Sweden)

    Abdessamed Nessil

    2013-01-01

    Full Text Available The aim of this work is related to an analysis of journal bearings lubrication using non-Newtonian fluids which are described by a power-law model. The performance characteristics of the journal bearings are determined for various values of the non-Newtonian power-law index “” which is equal to: 0.9, 1, and 1.1. Obtained numerical results show that for the dilatant fluids (, the load-carrying capacity, the pressure, the temperature, and the frictional force increased while for the pseudo-plastic fluids ( they decreased. The influence of the thermal effects on these characteristics is important at higher values of the flow behavior index “.” Obtained results are compared to those obtained by others. Good agreement is observed between the different results.

  2. Dynamic characteristics of polymer faced tilting pad journal bearings

    DEFF Research Database (Denmark)

    Simmons, Gregory F.; Cerda Varela, Alejandro Javier; Santos, Ilmar

    2014-01-01

    Dynamic characteristics of polymer faced tilting pad journal bearings are presented. Investigations are conducted using a single pad, load on pad configuration over a range of shaft speeds and loads. Two polyether ether ketone (PEEK) faced pads, one polytetrafluoroethylene (PTFE) faced pad and two...... entirely PEEK pads are investigated to determine the effect of varying mean bearing pressure and pivot characteristics as well as different material properties of the polymer layer. Experimental results indicate increased damping and decreased stiffness and slightly increased oil film temperature...... for entirely PEEK pads compared to pads with a PEEK lining and steel backing. Similar effects were observed by using a softer (PTFE) pad liner with a steel backing....

  3. Analysis of hydrostatic journal bearings with end seals

    Science.gov (United States)

    San Andres, L. A.

    1992-10-01

    An approximate analysis for the pressure field and dynamic force coefficients in turbulent flow, centered hydrostatic journal bearings (HJBs) with fluid inertia and liquid compressibility effects is presented. Results from the analysis show that HJBs with end seals have increased damping, better dynamic stability characteristics, as well as lower flow rates, than conventional HJBs. However, hydrostatic (direct) stiffness may be lost if excessively tight end seals are used. End seals are shown to compensate for the effect of liquid compressibility within the recess volume, and prescribe a net reduction in the whirl frequency ratio for hybrid operation. Hydrostatic squeeze film dampers (HSFD) with end seals are shown to be a viable alternative in applications where a tight control of the bearing leakage is important such as in jet-engines. Furthermore, HSFDs with end seals could be used as an active device to control the available damping in a typical application.

  4. Piezoelectric actuators in the active vibration control system of journal bearings

    Science.gov (United States)

    Tůma, J.; Šimek, J.; Mahdal, M.; Pawlenka, M.; Wagnerova, R.

    2017-07-01

    The advantage of journal hydrodynamic bearings is high radial load capacity and operation at high speeds. The disadvantage is the excitation of vibrations, called an oil whirl, after crossing a certain threshold of the rotational speed. The mentioned vibrations can be suppressed using the system of the active vibration control with piezoactuators which move the bearing bushing. The motion of the bearing bushing is controlled by a feedback controller, which responds to the change in position of the bearing journal which is sensed by a pair of capacitive sensors. Two stacked linear piezoactuators are used to actuate the position of the bearing journal. This new bearing enables not only to damp vibrations but also serves to maintain the desired bearing journal position with an accuracy of micrometers. The paper will focus on the effect of active vibration control on the performance characteristics of the journal bearing.

  5. Investigation of journal orbit and flow pattern in a dynamically loaded journal bearing

    DEFF Research Database (Denmark)

    Christiansen, Christian Kim; Walther, Jens Honore; Klit, Peder

    2017-01-01

    A hydrodynamic journal bearing has been investigated using both the traditional two-dimensional (2D) Reynolds equation, and the full solution being the three-dimensional (3D) Navier-Stokes equations. The two approaches are compared by performing an investigation of two inlet groove designs......: the axial and the circumferential groove, respectively, on a bearing with length-to-diameter ratio of 0.5 exposed to a sinusoidal load pattern. Pressure distributions, journal orbits and frictional losses are compared. The modelling of grooves by pressure boundary conditions versus geometric conditions...... is examined. It is investigated if the presence of a groove increases frictional losses and the increase relates to groove dimensions. Furthermore, the influence of the groove design on the flow field is studied using the 3D solution....

  6. Operating characteristics of heavy loaded cylindrical journal bearing with variable axial profile

    Directory of Open Access Journals (Sweden)

    Stanislaw Strzelecki

    2005-12-01

    Full Text Available During the operation of turbounit its bearings displace as a result of heat elongation of bearings supports. It changes the static deflection line of rotor determined during assembly of the turbounit, causing an increase in the stresses on the bearing edges and a decrease in the dynamic state of the machine. One of possibilities to avoid the edge stresses is to apply the bearings with variable axial profile, e.g. hyperboloidal, convex profile in the axial cross-section of bearing. Application of journal bearings with hyperboloidal profile allows to extend the bearing operation range without the stress concentration on the edges of bush. These bearings successfully carry the extreme load in conditions of misaligned axis of journal and the bush eliminating the necessity of using self-aligning bearings. Operating characteristics of bearing include the resulting force, attitude angle, oil film pressure and temperature distributions, minimum oil film thickness, maximum oil film temperature. In literature there is a lack of data on the operating characteristics of heavy loaded hyperboloidal journal bearings operating at the conditions of adiabatic oil film and static equilibrium position of the journal. For the hyperboloidal bearing the operating characteristics have been obtained. Different values of length to diameter ratio, assumed shape and inclination ratio coefficients have been assumed. Iterative solution of the Reynolds', energy and viscosity equations was applied. Adiabatic oil film, laminar flow in the bearing gap as well as aligned and misaligned orientation of journal in the bush were considered.

  7. Vibration Characteristics of Hydrodynamic Fluid Film Pocket Journal Bearings

    Directory of Open Access Journals (Sweden)

    N. S. Feng

    2010-01-01

    Full Text Available Theoretical analyses of hydrodynamic fluid film bearings with different bearing profiles rely on solutions of the Reynolds equation. This paper presents an approach used for analysing the so-called pocket bearings formed from a combination of offset circular bearing profiles. The results show that the variation of the dynamic bearing characteristics with different load inclinations for the pocket bearings is less than that for the elliptic bearing counterpart. It is shown that the natural frequencies as well as the critical speeds, and hence the vibrational behaviour, can also be significantly different for an industrial rotor supported by the different bearings.

  8. 49 CFR 215.109 - Defective plain bearing box: Journal lubrication system.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Defective plain bearing box: Journal lubrication... Freight Car Components Suspension System § 215.109 Defective plain bearing box: Journal lubrication system... impairs proper lubrication of the pad; (d) Has— (1) An exposed center core (except by design); or (2...

  9. Theoretical Vibration Analysis Regarding Excitation due to Elliptical Shaft Journals in Sleeve Bearings of Electrical Motors

    Directory of Open Access Journals (Sweden)

    Ulrich Werner

    2012-01-01

    Full Text Available This paper shows a theoretical vibration analysis regarding excitation due to elliptical shaft journals in sleeve bearings of electrical motors, based on a simplified rotordynamic model. It is shown that elliptical shaft journals lead to kinematic constraints regarding the movement of the shaft journals on the oil film of the sleeve bearings and therefore to an excitation of the rotordynamic system. The solution of the linear differential equation system leads to the mathematical description of the movement of the rotor mass, the shaft journals, and the sleeve bearing housings. Additionally the relative movements between the shaft journals and the bearing housings are deduced, as well as the bearing housing vibration velocities. The presented simplified rotordynamic model can also be applied to rotating machines, other than electrical machines. In this case, only the electromagnetic spring value cm has to be put to zero.

  10. Theoretical Vibration Analysis Regarding Excitation due to Elliptical Shaft Journals in Sleeve Bearings of Electrical Motors

    OpenAIRE

    Ulrich Werner

    2012-01-01

    This paper shows a theoretical vibration analysis regarding excitation due to elliptical shaft journals in sleeve bearings of electrical motors, based on a simplified rotordynamic model. It is shown that elliptical shaft journals lead to kinematic constraints regarding the movement of the shaft journals on the oil film of the sleeve bearings and therefore to an excitation of the rotordynamic system. The solution of the linear differential equation system leads to the mathematical description ...

  11. Numerical analysis of capillary compensated micropolar fluid lubricated hole-entry journal bearings

    Directory of Open Access Journals (Sweden)

    Nathi Ram

    2016-06-01

    Full Text Available The micropolar lubricated symmetric/asymmetric hole-entry bearings using capillary restrictor have been analyzed in the present work. Reynolds equation for micropolar lubricant has been derived and solved by FEM. The results have been computed using selected parameters of micropolar lubricant for hole-entry hydrostatic/hybrid journal bearings. A significant increase in damping and stiffness coefficients is observed for bearings having micropolar parameter N2=0.9, lm=10 than similar bearings under Newtonian lubricant. The threshold speed gets increased when symmetric bearing lubricated under micropolar fluid than Newtonian lubricant. The threshold speed gets increased when symmetric bearing lubricated under micropolar fluid than Newtonian lubricant.

  12. Developments for the calculation of heavily loaded journal bearings

    OpenAIRE

    Barrett, D. J. S.

    2010-01-01

    This thesis describes the development of an ElastoHydroDynamic (EHD) bearing calculation. The effect of body forces is shown to be important for highly loaded bearings in reciprocating internal combustion engines. Extension of the program to rotating machinery includes an examination of instability in the shaft bearings of a turbocharger. The development of a parameter to predict cavitation damage in a bearing is promising. Several calculation results using the program are s...

  13. Effect of fluid compressibility on journal bearing performance

    Energy Technology Data Exchange (ETDEWEB)

    Dimofte, F. (NASA, Lewis Research Center, Cleveland, OH (United States))

    1993-07-01

    An analysis was undertaken to determine the effect of fluid film compressibility on the performance of fluid film bearings. A new version of the Reynolds equation was developed, using a polytropic expansion, for both steady-state and dynamic conditions. Polytropic exponents from 1 (isothermal) to 1000 (approaching an incompressible liquid) were evaluated for two bearing numbers, selected from a range of practical interest for cryogenic application, and without cavitation. Bearing loads were insensitive to fluid compressibility for low bearing numbers, as was expected. The effect of compressibility on attitude angle was significant, even when the bearing number was low. A small amount of fluid compressibility was enough to obtain stable running conditions. Incompressible liquid lacked stability at all conditions. Fluid compressibility can be used to control the bearing dynamic coefficients, thereby influencing the dynamic behavior of the rotor-bearing system. 14 refs.

  14. Effect of fluid compressibility on journal bearing performance

    Science.gov (United States)

    Dimofte, Florin

    1993-01-01

    An analysis was undertaken to determine the effect of fluid film compressibility on the performance of fluid film bearings. A new version of the Reynolds equation was developed, using a polytropic expansion, for both steady-state and dynamic conditions. Polytropic exponents from 1 (isothermal) to 1000 (approaching an incompressible liquid) were evaluated for two bearing numbers, selected from a range of practical interest for cryogenic application, and without cavitation. Bearing loads were insensitive to fluid compressibility for low bearing numbers, as was expected. The effect of compressibility on attitude angle was significant, even when the bearing number was low. A small amount of fluid compressibility was enough to obtain stable running conditions. Incompressible liquid lacked stability at all conditions. Fluid compressibility can be used to control the bearing dynamic coefficients, thereby influencing the dynamic behavior of the rotor-bearing system.

  15. The Effect of Non-Circular Bearing Shapes in Hydrodynamic Journal Bearings on the Vibration Behavior of Turbocharger Structures

    Directory of Open Access Journals (Sweden)

    Lukas Bernhauser

    2017-03-01

    Full Text Available Increasing quality demands of combustion engines require, amongst others, improvements of the engine’s acoustics and all (subcomponents mounted to the latter. A significant impact to the audible tonal noise spectrum results from the vibratory motions of fast-rotating turbocharger rotor systems in multiple hydrodynamic bearings such as floating bearing rings. Particularly, the study of self-excited non-linear vibrations of the rotor-bearing systems is crucial for the understanding, prevention or reduction of the noise and, consequently, for a sustainable engine acoustics development. This work presents an efficient modeling approach for the investigation, optimization, and design improvement of complex turbocharger rotors in hydrodynamic journal bearings, including floating bearing rings with circular and non-circular bearing geometries. The capability of tonal non-synchronous vibration prevention using non-circular bearing shapes is demonstrated with dynamic run-up simulations of the presented model. These findings and the performance of our model are compared and validated with results of a classical Laval/Jeffcott rotor-bearing model and a specific turbocharger model found in the literature. It is shown that the presented simulation method yields fast and accurate results and furthermore, that non-circular bearing shapes are an effective measure to reduce or even prevent self-excited tonal noise.

  16. Performance Improvement of tilting-pad journal bearings by means of controllable lubrication

    DEFF Research Database (Denmark)

    Cerda, Alejandro; Santos, Ilmar

    2012-01-01

    Tilting-Pad Journal Bearings (TPJB) are commonly used on high-performance turbomachinery due to their excellent stability properties at high speed when compared to other designs for oil film bearings. Hence, efforts have been made to improve the accuracy for the available models for these mechani......Tilting-Pad Journal Bearings (TPJB) are commonly used on high-performance turbomachinery due to their excellent stability properties at high speed when compared to other designs for oil film bearings. Hence, efforts have been made to improve the accuracy for the available models...

  17. Design optimization and probabilistic analysis of a hydrodynamic journal bearing

    Science.gov (United States)

    Liniecki, Alexander G.

    1990-01-01

    A nonlinear constrained optimization of a hydrodynamic bearing was performed yielding three main variables: radial clearance, bearing length to diameter ratio, and lubricating oil viscosity. As an objective function a combined model of temperature rise and oil supply has been adopted. The optimized model of the bearing has been simulated for population of 1000 cases using Monte Carlo statistical method. It appeared that the so called 'optimal solution' generated more than 50 percent of failed bearings, because their minimum oil film thickness violated stipulated minimum constraint value. As a remedy change of oil viscosity is suggested after several sensitivities of variables have been investigated.

  18. Compliant Foil Journal Bearings - Investigation of Dynamic Properties

    DEFF Research Database (Denmark)

    Larsen, Jon Steffen; Santos, Ilmar

    on the compliant foil bearings, and the understanding of their dynamic behaviour is growing. However, practical design involving these bearings are still associated with a large degree of trial and error. This study aims at establishing an accurate mathematical model, to calculate the pressure, film height...

  19. Exploring integral controllers in actively-lubricated tilting-pad journal bearings

    DEFF Research Database (Denmark)

    Salazar, Jorge Andrés González; Santos, Ilmar

    2015-01-01

    investigation of integral controllers for feedback-controlled lubrication with the aim of: a) presetting the static journal center and consequently exploring the changes of bearing dynamic properties; b) obtaining an integral controller capable of re-positioning the static journal eccentricity for matching...... equilibria under conventional hydrodynamic and feedback-controlled lubrication regimes. A novel application is proposed, that tries to build non-invasive perturbation forces and uses the active fluid film forces of the bearing as a calibrated shaker....

  20. Parametric studies on floating pad journal bearing for high speed cryogenic turboexpanders

    Science.gov (United States)

    Jain, A.; Jadhav, M. M.; Karimulla, S.; Chakravarty, A.

    2017-12-01

    Most modern medium and large capacity helium liquefaction/refrigeration plants employ high speed cryogenic turboexpanders in their refrigeration/liquefaction cycles as active cooling devices. The operating speed of these turboexpanders is in the range of 3000-5000 Hz and hence specialized types of bearings are required. Floating pad journal bearing, which is a special type of tilting pad journal bearing, where mechanical pivots are absent and pads are fully suspended in gas, can be a good solution for stable operation of these high speed compact rotors. The pads are separated from shaft as well as from housing by fluid film between them, and both these sides of pad are interconnected by a network of feed holes. The work presented in this article aims to characterize floating pad journal bearings through parametric studies. The steady state performance characteristics of the bearing are represented by load capacity, stiffness coefficients and heat generation rate of the bearing. The geometrical parameters such as bearing clearances, preload of pads, etc. are varied and performance characteristics of the floating pad journal bearing are studied and presented. The dependence of stiffness coefficients on rotational speed of shaft is also analyzed.

  1. Testing of full scale composite journal bearings for offshore underwater applications

    NARCIS (Netherlands)

    Dragt, R.C.; Van Den Heuvel, W.; Gelinck, E.R.M.; Slot, H.M.

    2015-01-01

    In the offshore industry, fibre reinforced sliding journal bearings are increasingly used due to their low-maintenance and self-lubricating characteristics. To be able to use the bearings in the rough offshore environment, under heavy loading, full scale tests are essential to assess the friction

  2. Performance evolution of fully and partially textured hydrodynamic journal bearings lubricated with two lubricants

    Science.gov (United States)

    Tala-ighil, N.; Fillon, M.

    2017-02-01

    This study investigates the evolution of the main bearing performance of partially and fully textured hydrodynamic journal bearing. The viscosity effect is also analysed by the mean of numerical simulations for two types of oil: the oil 1 (ISO VG 32, 31.3 cSt at 40 °C) has a lower viscosity than oil 2 (ISO VG 100, 93 cSt at 40 °C). Reynolds equation is solved by finite difference and Gauss-Seidel methods with over-relaxation for various operating conditions. It is shown that, under hydrodynamic lubrication regime, the improvement of the most important characteristics (the friction coefficient and minimum film thickness) of a textured journal bearing depend strongly on the lubricant viscosity and the journal rotational speed. The fully textured journal bearing is highly favorable at very low speeds while the partially textured journal bearing is more suitable for slightly higher speeds. The gain in bearing performance due to the texturing of the bushing disappears at a critical speed of the journal and then, for higher rotational speeds, the presence of textures becomes detrimental.

  3. Design, fabrication, and performance of foil journal bearing for the brayton rotating unit

    Science.gov (United States)

    Licht, L.; Branger, M.

    1973-01-01

    Foil bearings were designed and manufactured to replace pivoted-shoe journal bearings in an existing Brayton Cycle turbo-alternator-compressor. The design of this unconventional rotor support was accomplished within the constraints and space limitations imposed by the present machine, and the substitution of foil bearings was effected without changes or modification other machine components. A housing and a test rig were constructed to incorporate the new foil-bearing support into a unified assemble with an air-driven rotor and the gimbal-mounted thrust bearing, seals, and shrouds of an actual Brayton Rotating Unit. The foil bearing required no external pressure source, and stable self-acting rotation was achieved at all speeds up to 43,200 rpm. Excellent wipe-wear characteristics of the foil bearing permitted well over 1000 start-stop cycles with no deterioriation of performance in the entire speed range.

  4. CFD Analysis of A Starved Four-Pad Tilting-Pad Journal Bearing with An Elastic Support of Pads

    Science.gov (United States)

    Parovay, E. F.; Falaleev, S. V.

    2018-01-01

    Tilting-pad journal bearings are widely used in technics. Oil starvation operation regime is not common for hydrodynamic bearings. However, correctly designed low-flow journal bearing have to operate efficiently and consistently on high rotor speeds. An elastic support of bearing pads is a set of elastic pins made of steel. Elastic support allows pads to self-align and achieve an optimal operational mode. The article presents the thermohydrodynamic performance of an axial journal bearing. The study deals with 60 mm diameter four-pad tilting-pad journal bearing, submitted to a static load varying from 1000 to 30000 N with a rotating speed varying from 1000 to 10000 rpm. The investigation focuses on numerical studying the characteristics of low-flow tilting-pad journal bearings under oil starvation conditions. Dependencies of the bearing performance on the load, rotational speed of the shaft, and the size of the radial clearance are presented.

  5. Lubrication performances of short journal bearings operating with non-Newtonian ferrofluids

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Jaw-Ren [Taoyuan Innovation Inst. of Tech., Jhongli, TW (China). Dept. of Mechanical Engineering; Li, Po-Jui [National Taipei Univ. of Technology, Taipei, TW (China). Dept. of Inst. of Mechatronic Engineering; Hung, Tzu-Chen [National Taipei Univ. of Technology, Taipei, TW (China). Dept. of Mechanical Engineering

    2013-03-15

    The lubrication performances of short journal bearings operating with non-Newtonian ferrofluids have been investigated in the present study. Based upon the ferrofluid model of Shliomis and the micro-continuum theory of Stokes, a two-dimensional modified Reynolds equation is derived by taking into account the effects of rotation of ferromagnetic particles and the effects of non-Newtonian properties. As an application, the short-bearing approximation is illustrated. Comparing with the conventional non-ferrofluid case, the short journal bearings with ferrofluids in the presence of magnetic fields result in a higher load capacity. Comparing with the Newtonian ferrofluid case, the non-Newtonian effects of couple stresses provide an enhancement in the load capacity, as well as a reduction in the friction parameter. The inclusion of non-Newtonian couple stresses signifies an improvement in performance characteristics of ferrofluid journal bearings. (orig.)

  6. A superlinear iteration method for calculation of finite length journal bearing's static equilibrium position.

    Science.gov (United States)

    Zhou, Wenjie; Wei, Xuesong; Wang, Leqin; Wu, Guangkuan

    2017-05-01

    Solving the static equilibrium position is one of the most important parts of dynamic coefficients calculation and further coupled calculation of rotor system. The main contribution of this study is testing the superlinear iteration convergence method-twofold secant method, for the determination of the static equilibrium position of journal bearing with finite length. Essentially, the Reynolds equation for stable motion is solved by the finite difference method and the inner pressure is obtained by the successive over-relaxation iterative method reinforced by the compound Simpson quadrature formula. The accuracy and efficiency of the twofold secant method are higher in comparison with the secant method and dichotomy. The total number of iterative steps required for the twofold secant method are about one-third of the secant method and less than one-eighth of dichotomy for the same equilibrium position. The calculations for equilibrium position and pressure distribution for different bearing length, clearance and rotating speed were done. In the results, the eccentricity presents linear inverse proportional relationship to the attitude angle. The influence of the bearing length, clearance and bearing radius on the load-carrying capacity was also investigated. The results illustrate that larger bearing length, larger radius and smaller clearance are good for the load-carrying capacity of journal bearing. The application of the twofold secant method can greatly reduce the computational time for calculation of the dynamic coefficients and dynamic characteristics of rotor-bearing system with a journal bearing of finite length.

  7. Fluid Compressibility Effects on the Dynamic Response of Hydrostatic Journal Bearings

    Science.gov (United States)

    Sanandres, Luis A.

    1991-01-01

    A theoretical analysis for the dynamic performance characteristics of laminar flow, capillar/orifice compensated hydrostatic journal bearings is presented. The analysis considers in detail the effect of fluid compressibility in the bearing recesses. At high frequency excitations beyond a break frequency, the bearing hydrostatic stiffness increases sharply and it is accompanied by a rapid decrease in direct damping. Also, the potential of pneumatic hammer instability (negative damping) at low frequencies is likely to occur in hydrostatic bearing applications handling highly compressible fluids. Useful design criteria to avoid undesirable dynamic operating conditions at low and high frequencies are determined. The effect of fluid recess compressibility is brought into perspective, and found to be of utmost importance on the entire frequency spectrum response and stability characteristics of hydrostatic/hybrid journal bearings.

  8. Study of journal bearing dynamics using 3-dimensional motion picture graphics

    Science.gov (United States)

    Brewe, D. E.; Sosoka, D. J.

    1985-01-01

    Computer generated motion pictures of three dimensional graphics are being used to analyze journal bearings under dynamically loaded conditions. The motion pictures simultaneously present the motion of the journal and the pressures predicted within the fluid film of the bearing as they evolve in time. The correct prediction of these fluid film pressures can be complicated by the development of cavitation within the fluid. The numerical model that is used predicts the formation of the cavitation bubble and its growth, downstream movement, and subsequent collapse. A complete physical picture is created in the motion picture as the journal traverses through the entire dynamic cycle.

  9. A study on compliant layers and its influence on dynamic response of a hydrodynamic journal bearing

    DEFF Research Database (Denmark)

    Thomsen, Kim; Klit, Peder

    2011-01-01

    behavior of the bearing. The influence of the liner stiffness on the dynamic response of a highly dynamically loaded journal bearing is evaluated by varying the stiffness and comparing the response. The configurations with different liner stiffnesses are evaluated on the parameters that are traditionally......For some hydrodynamic bearing applications polymer-lined bearings are chosen over traditional metal alloy bearings due to their better wear and friction properties when operating at very thin films, e.g. in the mixed lubrication region. The introduction of a compliant layer also affects the dynamic...... used to evaluate hydrodynamic bearing designs: dynamic response, maximum pressure, minimum film thickness, wear, power loss and temperature response. The primary findings are that the maximum pressures are reduced significantly and this comes at the expense of slightly higher eccentricity ratios during...

  10. Effect of boundary conditions on the performances of gas-lubricated micro journal bearing

    Science.gov (United States)

    Wang, Sheng; Lei, Kangbin; Luo, Xilian; Gu, Zhaolin; Kiwamu, Kase

    2010-06-01

    As significant components of micromechanics, gas-lubricated microbearings are more prevalent for their special advantages than other types. The fluid dynamics of the microbearing is different from their larger cousins due to the noncontinuum effect and surface-dominated effect, which may make the Navier-Stokes equations invalid. In this paper, by considering the accommodation coefficients on journal (α i) and that on bearing (α o) separately, the microbearings with different bearing numbers under the assumption of large L/D (length to diameter) are simulated using direct simulation Monte Carlo (DSMC) program incorporated with a Volume-CAD software. The diffuse reflection model and Cercignani-Lampis-Lord (CLL) model are applied to model the molecule-surface interaction. The flow field characteristics, as well as the performances of gas-lubricated journal bearings including load-carrying capacity, attitude angle and bearing drag are obtained. The results reveal that αi and αo have different effects to flow field characteristics and bearing performances. The bearing number has significantly impact on the bearing performances. The method developed in this paper would be very useful for designing and evaluating the gas-lubricated journal microbearing.

  11. Static, Dynamic, and Thermal Properties of Compressible Fluid Film Journal Bearings

    DEFF Research Database (Denmark)

    Paulsen, Bo Terp; Morosi, Stefano; Santos, Ilmar

    2011-01-01

    Modern turbo-machinery applications, high-speed machine tools, and laboratory equipment require ever-growing rotational speeds and high degree of precision and reliability. Gas journal bearings are often employed because they meet the demands of high-speed performance, in a clean environment......, and work great efficiency. A great deal of literature has concentrated on the analysis and prediction of the static and dynamic performance of gas bearings, assuming isothermal conditions. The present contribution presents a detailed mathematical modeling for nonisothermal lubrication of a compressible...... fluid film journal bearing, in order to identify when this type of analysis should be of concern. Load capacity, stiffness, and damping coefficients are determined by the solution of the standard Reynolds equation coupled to the energy equation. Numerical investigations show how bearing geometry...

  12. Stability analysis of slot-entry hybrid journal bearings operating with non-newtonian lubricant

    Directory of Open Access Journals (Sweden)

    H.C. Garg

    2015-09-01

    Full Text Available This paper presents theoretical investigations of rheological effects of lubricant on stability parameters of various configurations of slot-entry hybrid journal bearing system. FEM has been used to solve Reynolds equation governing flow of lubricant in bearing clearance space along with restrictor flow equation using suitable iterative technique. The non-Newtonian lubricant has been assumed to follow cubic shear stress law. The stability parameters in terms of stiffness coefficients, damping coefficients, threshold speed and whirl frequency of different configurations of slot-entry hybrid journal bearing have been computed and presented for wide range of external load while operating with Newtonian and Non-Newtonian lubricants. The computed results reveal that variation of viscosity due to non-Newtonian behavior of lubricant affects bearing stability quite significantly. The results are presented in graphical form and logical conclusions are drawn to identify best possible configuration from stability point of view.

  13. Cavitation Estimates by Orbit Prediction of a Journal Bearing - Finite Element Modelling and Experimental Studies Cavitation Estimates by Orbit Prediction of a Journal Bearing - Finite Element Modelling and Experimental Studies

    DEFF Research Database (Denmark)

    Christiansen, Christian Kim; Klit, Peder; Walther, Jens Honore

    2015-01-01

    The paper presents a two-sided approach to establish understanding of the cavitation phenomenon in dynamically loaded journal bearings, more specifically the engine bearings of large two-stroke marine diesel engines. One disadvantage of the journal bearing is the converging-diverging geometry...... making it prone to cavitation which again affects the load carrying capacity of the bearing. In combustion engines the journal bearing plays a vital role especiallyas main and crosshead bearings transmitting the combustion forces. Those forces vary highly during one combustion cycle which is further...... influencing the load carrying capacity and ultimately the chances of fatal shaft-sleeve contact. By solving Reynolds equation numerically using finite elements and incorporating a cavitation algorithm, the dynamic coefficients can be used to establish the journal orbit for a given bearing and load pattern...

  14. On the stability analysis of flexible rotors supported by Hybrid Aerostatic - Gas Journal Bearings

    DEFF Research Database (Denmark)

    Morosi, Stefano; Santos, Ilmar

    of external pressurization. The present contribution presents a detailed mathematical modeling for hybrid lubrication of a compressible fluid film journal bearing. Piezo-actuated valves are used in order to inject pressurized air into the bearing gap through orifices located on the bearing walls. A modified...... form of the compressible Reynolds equation for active lubrication is derived. Particular attention is given to the injections terms and a comparison is carried on between fully nonlinear and linearized expressions. By solving this equation, stiffness and damping coefficients can be determined...

  15. Design of various fixed-geometry water-lubricated hydrodynamic journal bearings for maximum stability

    Science.gov (United States)

    Schuller, F. T.

    1973-01-01

    This publication is the result of over 260 fractional-frequency-whirl stability tests on a variety of fixed-geometry journal bearings. It is intended principally as a guide in the selection and design of antiwhirl bearings that must operate at high speeds and low loads in low-viscosity fluids such as water or liquid metals. However, the various fixed-geometry configurations can be employed as well in applications where other lubricants, such as oil, are used and fractional-frequency whirl is a problem. The important parameters that effect stability are discussed for each bearing type, and design curves to facilitate the design of optimum-geometry bearings are included. A comparison of the stability of the different bearing configurations tested is also given.

  16. Damage Equivalent Test Methodologies as Design Elements for Journal Bearing Systems

    Directory of Open Access Journals (Sweden)

    Florian Summer

    2017-12-01

    Full Text Available The current paper addresses the field of experimental research of journal bearing systems. In this regard, the challenges are dealt with concerning simultaneous testing with a close correlation to the industrial application and with a high resolution of tribological processes. Concerning this aspect, two damage equivalent laboratory test methodologies for journal slide bearing systems are presented, and their ability to visualize certain performance parameters of bearing systems are emphasized (for instance friction performance, (start stop wear processes, and seizure events. The results clearly emphasize that the applied methodologies provide accurate findings regarding specific effects of selective parameters/changes on the performance of bearing systems, such as polymer overlays may result in improved mixed friction sliding conditions if designed properly, and they provide superior start stop wear resistance; the use of specific corrosion inhibitors can successfully prevent tribo-corrosion on bronze bearings; a decrease of oil viscosity increases solid friction share but decreases fluid friction; lubricant anti-wear additives are able to improve seizure resistance and sliding properties of bearing systems depending on formulation harmonization; and novel bearing material coatings, e.g., sputtered SnCu, can significantly improve emergency running capabilities.

  17. Theoretical and experimental studies on dynamics of double-helical gear system supported by journal bearings

    Directory of Open Access Journals (Sweden)

    Minghu Yin

    2016-05-01

    Full Text Available The dynamic behaviour of a double-helical gear system supported by journal bearings is theoretically and experimentally investigated in this study. A bending–torsional–axial coupling model for dynamic analysis of double-helical gear system is developed. Influence of the time-varying mesh stiffness and damping is considered. Oil film stiffness and damping of the supporting journal bearing are supposed to be time-varying, and the time-varying oil film stiffness and damping are predicted by a back propagation neural network, which is optimized by genetic algorithm. A double-helical gear–rotor–journal bearing system test rig is also established to carry out the experimental investigations, such as the dynamic transmission errors of gear pairs. The comparisons between theoretical and experimental results show that the time-varying oil film dynamic coefficients of journal bearings are an important internal excitation. The theoretical model with time-varying oil film stiffness and damping can predict the gear dynamics more accurate than the model with time-invariant oil film stiffness and damping, and the neural network optimized by genetic algorithm can obtain the time-varying oil film stiffness and damping efficiently and accurately for the dynamic analysis of double-helical gear system.

  18. Active tilting-pad journal bearings supporting flexible rotors: Part I – The hybrid lubrication

    DEFF Research Database (Denmark)

    Salazar, Jorge Andrés González; Santos, Ilmar

    2017-01-01

    This is part I of a twofold paper series, of theoretical and experimental nature, presenting the design and implementation of model-based controllers meant for assisting the hybrid and developing the feedback-controlled lubrication regimes in active tilting-pad journal bearings (active TPJBs). In...

  19. Study of design parameters for squeeze film air journal bearing – excitation frequency and amplitude

    Directory of Open Access Journals (Sweden)

    C. Wang

    2011-07-01

    Full Text Available The paper presents a design of squeeze film air journal bearing based on the design rules derived from CFX and FEA simulation study of an air film in between two flat plates, one of which was driven in a sinusoidal manner. The rules are that the oscillation frequency should be at least 15 kHz and that the oscillation amplitude be as large as possible to ensure a greater film thickness and to allow the bearing to reach its stable equilibrium quickly. The proposed journal bearing is made from AL2024-T3, of 20.02 mm outer diameter, 600 mm length and 2 mm thickness. Three 20-mm long fins are on the outer surface of the bearing tube and are spaced 120° apart; three longitudinal flats are milled equi-spaced between the fins and two piezoelectric actuators are mounted lengthwise on each flat. Such a design produces a modal shape on the bearing tube which resembles a triangle. When excited in this mode at the frequency of 16.37 kHz, and a voltage of 75 V AC with 75 V DC offset acting on the piezoelectric actuators, the air gap underneath of the bearing tube behaves as a squeeze air film with a response amplitude of 3.22 μm. The three design rules were validated by experiments.

  20. On the simplifications for the thermal modeling of tilting-pad journal bearings under thermoelastohydrodynamic regime

    DEFF Research Database (Denmark)

    Cerda Varela, Alejandro Javier; Fillon, Michel; Santos, Ilmar

    2012-01-01

    are strongly dependent on the Reynolds number for the oil flow in the bearing. For bearings operating in laminar regime, the decoupling of the oil film energy equation solving procedure, with no heat transfer terms included, with the pad heat conduction problem, where the oil film temperature is applied...... formulation for inclusion of the heat transfer effects between oil film and pad surface. Such simplified approach becomes necessary when modeling the behavior of tilting-pad journal bearings operating on controllable lubrication regime. Three different simplified heat transfer models are tested, by comparing...... at the boundary as a Dirichlet condition, showed a good balance between quality of the results, implementation easiness and reduction in calculation time. For bearings on the upper limit of the laminar regime, the calculation of an approximated oil film temperature gradient in the radial direction, as proposed...

  1. Experimental Measurements of Journal Bearing Friction Using Mineral, Synthetic, and Bio-Based Lubricants

    Directory of Open Access Journals (Sweden)

    Pantelis G. Nikolakopoulos

    2015-04-01

    Full Text Available The environmental impact of many industrial and naval applications is becoming increasingly important. Journal bearings are crucial components related with the reliable, safe and environmentally friendly operation of rotating machinery in many applications, e.g., in hydroplants, ships, power generation stations. The maintenance activities in certain cases also have considerable environmental impact. Fortunately, it is relatively easy to reduce the impact by changing the way lubricants are being used. Selecting the proper lubricant is important to sharply reduce long-term costs. The best-fit product selection can mean longer lubricant life, reduced machine wear, reduced incipient power losses and improved safety. Suitable basestocks and additives reduce environmental impact. In this paper, three types of lubricants are used in order to examine their effects on the tribological behavior of journal bearings. A mineral oil, a synthetic oil and a bio-based lubricant are experimentally and analytically examined for several configurations of load and journal rotational velocity. The friction forces and the hydrodynamic friction coefficients are calculated and compared. This investigation can assist the correct choice of lubricant in journal bearings with minimized environmental footprint.

  2. SLPMC- New Self Lubricating Polymer Matrix Composites for Journal and Ball Bearing Applications in Space

    Science.gov (United States)

    Merstallinger, A.; Macho, C.; Brodowski-Hanemann, G.; Bieringer, H.; Pambaguian, L.; Palladino, M.; Buttery, M.

    2015-09-01

    The paper is surveying the results of the ESA-project “SLPMC” covering the development of a self- lubricating polymer composite based on PTFE for use in bearings. The two targets of this project were to investigate lubrication mechanisms in PTFE-based composites under tribological conditions relevant to space applications (air, dry nitrogen, vacuum). And secondly, to develop a new composite to fulfil future needs by space applications. Hence, in the frame of this project several new composites based on PTFE-matrix with different kind of fillers were defined, manufactured and tested on material level. From the most promising variants bushes for journal bearings and cages for ball bearings were machined. Ball bearing tests were done in high vacuum up to 10 million revolutions.This paper summarises the main results from the project on material level focusing on tribological results derived by pin-on-disc tests. The influences of parameters like load, speed, atmosphere and temperature are discussed and compared to other already known materials. The paper also reports the findings from final ball bearing and plain bearing tests.

  3. Calculation and interpolation of the characteristics of the hydrodynamic journal bearings in the domain of possible movements of the rotor journals

    Science.gov (United States)

    Kumenko, A. I.; Kostyukov, V. N.; Kuz'minykh, N. Yu.

    2016-10-01

    To visualize the physical processes that occur in the journal bearings of the shafting of power generating turbosets, a technique for preliminary calculation of a set of characteristics of the journal bearings in the domain of possible movements (DPM) of the rotor journals is proposed. The technique is based on interpolation of the oil film characteristics and is designed for use in real-time diagnostic system COMPACS®. According to this technique, for each journal bearing, the domain of possible movement of the shaft journal is computed, then triangulation of the area is performed, and the corresponding mesh is constructed. At each node of the mesh, all characteristics of the journal bearing required by the diagnostic system are calculated. Via shaft-position sensors, the system measures—in the online mode—the instantaneous location of the shaft journal in the bearing and determines the averaged static position of the journals (the pivoting vector). Afterwards, continuous interpolation in the triangulation domain is performed, which allows the real-time calculation of the static and dynamic forces that act on the rotor journal, the flow rate and the temperature of the lubricant, and power friction losses. Use of the proposed method on a running turboset enables diagnosing the technical condition of the shafting support system and promptly identifying the defects that determine the vibrational state and the overall reliability of the turboset. The authors report a number of examples of constructing the DPM and computing the basic static characteristics for elliptical journal bearings typical of large-scale power turbosets. To illustrate the interpolation method, the traditional approach to calculation of bearing properties is applied. This approach is based on a Reynolds two-dimensional isothermal equation that accounts for the mobility of the boundary of the oil film continuity.

  4. Experimental Measurements of Journal Bearing Friction Using Mineral, Synthetic, and Bio-Based Lubricants

    OpenAIRE

    Nikolakopoulos, Pantelis; Bompos, Dimitrios

    2015-01-01

    The environmental impact of many industrial and naval applications is becoming increasingly important. Journal bearings are crucial components related with the reliable, safe and environmentally friendly operation of rotating machinery in many applications, e.g., in hydroplants, ships, power generation stations. The maintenance activities in certain cases also have considerable environmental impact. Fortunately, it is relatively easy to reduce the impact by changing the way lubricants are bei...

  5. Experimental and analytical performance evaluation of short circular hydrodynamic journal bearings used in rotary blood pumps.

    Science.gov (United States)

    Boehning, Fiete; Timms, Daniel; Hsu, Po-Lin; Schmitz-Rode, Thomas; Steinseifer, Ulrich

    2013-10-01

    Rotary blood pumps (RBPs) have demonstrated considerable promise while treating heart failure patients, such that they are being placed at an earlier stage of the disease. These devices may therefore be required to operate for prolonged durations which yields the need for RBPs exhibiting high durability, reliability, and blood compatibility. Noncontacting bearings, utilizing magnetic and/or hydrodynamic suspension techniques, appear to provide a suitable solution to these challenges. Hydrodynamic suspension has the advantage that it does not need feedback control systems. Among various hydrodynamic bearing types, the circular journal bearing has the particular benefit of easy manufacturing. This study presents methods to evaluate the performance of short (length to diameter ratio hydrodynamic journal bearings (HJBs) for RBPs. Analytical calculations with specific boundary conditions are presented to predict the rotor's eccentricity under equilibrium states and thus the related performance parameters such as load capacity, power loss, and shear rates. These results and boundary conditions were confirmed experimentally in a specially designed test set-up. The bearing performance was found to correlate to analytical solutions using the full Sommerfeld boundary condition instead of the half Sommerfeld condition conventionally used for such applications. Geometrical and operational parameter variations showed that HJB designs with a short Sommerfeld Number SS >0.02 can provide sufficient fluid film thicknesses and low shear rates. The measurements were further used to evaluate the bearings' stability. The estimation of the stability threshold drawn in relation to a modified stability index and the equilibrium eccentricity of the rotor allows the prediction of stability for short circular HJB designs under full Sommerfeld condition. © 2013 Wiley Periodicals, Inc. and International Center for Artificial Organs and Transplantation.

  6. Nonlinear dynamics of a support-excited flexible rotor with hydrodynamic journal bearings

    Science.gov (United States)

    Dakel, Mzaki; Baguet, Sébastien; Dufour, Régis

    2014-05-01

    The major purpose of this study is to predict the dynamic behavior of an on-board rotor mounted on hydrodynamic journal bearings in the presence of rigid support movements, the target application being turbochargers of vehicles or rotating machines subject to seismic excitation. The proposed on-board rotor model is based on Timoshenko beam finite elements. The dynamic modeling takes into account the geometric asymmetry of shaft and/or rigid disk as well as the six deterministic translations and rotations of the rotor rigid support. Depending on the type of analysis used for the bearing, the fluid film forces computed with the Reynolds equation are linear/nonlinear. Thus the application of Lagrange's equations yields the linear/nonlinear equations of motion of the rotating rotor in bending with respect to the moving rigid support which represents a non-inertial frame of reference. These equations are solved using the implicit Newmark time-step integration scheme. Due to the geometric asymmetry of the rotor and to the rotational motions of the support, the equations of motion include time-varying parametric terms which can lead to lateral dynamic instability. The influence of sinusoidal rotational or translational motions of the support, the accuracy of the linear 8-coefficient bearing model and the interest of the nonlinear model for a hydrodynamic journal bearing are examined and discussed by means of stability charts, orbits of the rotor, time history responses, fast Fourier transforms, bifurcation diagrams as well as Poincaré maps.

  7. The Impact of Convective Fluid Inertia Forces on Operation of Tilting-Pad Journal Bearings

    Directory of Open Access Journals (Sweden)

    Thomas Hagemann

    2017-01-01

    Full Text Available This paper presents a combination of experimental data, CFD analyses, and bearing code predictions on emergence of convective inertia fluid forces within the lube oil flow of tilting-pad journal bearings. Concordantly, experimental data and CFD analyses show a significant rise of local pressure at the transition between inlet and leading edge of tilting-pad, especially for high-speed applications with surface speeds up to 100 m/s. This effect can be related to convective inertia forces within fluid flow as cross-sections and flow character rapidly change at the pad entrance. An energy-based approach is implemented in the bearing code in order to provide enhanced boundary conditions for Reynolds equation considering this effect. As a result, predictions of bearing code achieved significant improved correlation with measured pressure distributions and CFD-data. Further, beside the local influence, a nonnegligible impact on characteristic parameters of bearing operation such as maximum temperature and stiffness and damping coefficients is observed. Finally, the results are critically analyzed and requirements to gain more distinct and reliable data are specified.

  8. Aerodynamic journal bearing with a flexible, damped support operating at 7.2 million DN

    Science.gov (United States)

    Waumans, Tobias; Peirs, Jan; Al-Bender, Farid; Reynaerts, Dominiek

    2011-10-01

    This paper reports on the design, development and experimental validation of an aerodynamic journal bearing with a flexible, damped support operating at speeds up to 1.2 million rpm (= 7.2 million DN). In terms of the DN-number, this achievement represents to our knowledge a record for an air bearing of the self-acting type. Stabilization by means of a flexible, damped support therefore proves to be a promising solution to the dynamic stability problem of high-speed gas bearings. In order to select the support parameters in an optimal way, a stability study is performed leading to the formulation of a series of dimensionless design guidelines. The proposed implementation, which makes use of elastomeric O-rings in combination with a tunable squeeze-film damper, is discussed in detail. A method for the manufacturing of miniature bearing bushes with a wave-shaped film height profile is outlined. Experiments up to 683 280 rpm are performed with an air-driven turbine and up to 1203 000 rpm with a helium-driven turbine. Deceleration experiments are conducted in order to obtain an estimation of the frictional losses of the system.

  9. Non-Newtonian effects on the coastdown phenomenon of hydrodynamic journal bearings

    Energy Technology Data Exchange (ETDEWEB)

    Sheeja, D.; Prabhu, B.S. (Indian Inst. of Technology, Madras (India))

    1993-07-01

    The behavior of a rotating system after its power supply is cut off is called the coastdown phenomenon. An experimental investigation of the coastdown characteristics was carried out on a rotor rig, with different types of lubricants including a Newtonian oil, a blend of ISOVG 32 and hydrogenated styrene isoprene, multigrade oils, and aqueous polymer solutions in a hydrodynamic journal bearing. The characteristics were plotted in terms of deceleration vs. speed, which resembled the Stribeck diagram of friction due to viscous drag. Thus, the apparent Stribeck diagrams of friction for the above oils were obtained by plotting the derived coefficient of friction against the reciprocal Sommerfeld number. 11 refs.

  10. Non-Newtonian effects on the coastdown phenomenon of hydrodynamic journal bearings

    Science.gov (United States)

    Sheeja, D.; Prabhu, B. S.

    1993-07-01

    The behavior of a rotating system after its power supply is cut off is called the coastdown phenomenon. An experimental investigation of the coastdown characteristics was carried out on a rotor rig, with different types of lubricants including a Newtonian oil, a blend of ISOVG 32 and hydrogenated styrene isoprene, multigrade oils, and aqueous polymer solutions in a hydrodynamic journal bearing. The characteristics were plotted in terms of deceleration vs. speed, which resembled the Stribeck diagram of friction due to viscous drag. Thus, the apparent Stribeck diagrams of friction for the above oils were obtained by plotting the derived coefficient of friction against the reciprocal Sommerfeld number.

  11. Geometrical design parameters for journal bearings with flexure pads and compliant liners

    DEFF Research Database (Denmark)

    Thomsen, Kim; Klit, Peder

    2012-01-01

    A hydrodynamic journal bearing utilizing flexure pads with a compliant liner is studied and its performance enhanced through a parametric study. The main geometrical dimensions are varied and the affect on pad performance is analyzed. This will put more knowledge into the design and function...... of flexure pads. uidelines are given to the design of the pads and are also covering the polymer liner. It is found that the use of flexure pads is an attractive alternative to pivoted pads. Pivot contact-related failure modes are eliminated and load capacity is not restricted by the force that can...

  12. Vibration attenuation of a continuous rotor-blisk-journal bearing system employing smooth nonlinear energy sinks

    Science.gov (United States)

    Bab, Saeed; Khadem, S. E.; Shahgholi, Majid; Abbasi, Amirhassan

    2017-02-01

    The current paper investigates the effects of a number of smooth nonlinear energy sinks (NESs) located on the disk and bearings on the vibration attenuation of a rotor-blisk-journal bearing system under excitation of a mass eccentricity force. The blade and rotor are modeled using the Euler-Bernoulli beam theory. The nonlinear energy sinks on the bearing have a linear damping and an essentially nonlinear stiffness. The nonlinear energy sinks on the disk have a linear damping, linear stiffness, and an essentially nonlinear stiffness. It can be seen that the linear stiffness of the NESs on the disk is eliminated by the negative stiffness induced by the centrifugal force, and the collection of the NESs can be tuned to a required rotational speed of the rotor by varying the linear stiffness of the NESs. Furthermore, the remained stiffness of the NESs on the disk after elimination of their linear stiffness, would be essentially a nonlinear (nonlinearizable) one. Two nonlinear energy sinks in the vertical axes are positioned on the bearing housing and nnd NESs are located on the perimeter of the disk. The equations of motion are extracted using the extended Hamilton principle. The modal coordinates and complex transformations are employed to decrease the number of equations of motion. A genetic algorithm is used to optimize the parameters of the nonlinear energy sinks and its objective function is considered as minimizing the vibration of the rotating system within an operating speed range. In order to examine the periodic and non-periodic solutions of the system, time history, bifurcation diagram, Poincaré map, phase portrait, Lyapunov exponent, and power spectra analyses are performed. System shows periodic and quasi-periodic motions for different values of the system parameters. It is shown that the NESs on the disk and bearings have almost local effects on vibration reduction of rotating system. In addition, the optimum NESs remove the instability region from the

  13. Omnidirectional regeneration (ODR) of proximity sensor signals for robust diagnosis of journal bearing systems

    Science.gov (United States)

    Jung, Joon Ha; Jeon, Byung Chul; Youn, Byeng D.; Kim, Myungyon; Kim, Donghwan; Kim, Yeonwhan

    2017-06-01

    Some anomaly states of journal bearing rotor systems are direction-oriented (e.g., rubbing, misalignment). In these situations, vibration signals vary according to the direction of the sensors and the health state. This makes diagnosis difficult with traditional diagnosis methods. This paper proposes an omnidirectional regeneration method to develop a robust diagnosis algorithm for rotor systems. The proposed method can generate vibration signals in arbitrary directions without using extra sensors. In this method, signals are generated around the entire circumference of the rotor to consider all possible directions. Then, the directionality of each state is proved by mathematically and is evaluated using a proposed metric. When a directional state is determined, the classification is carried out on all of the generated signals. When a non-directional state is found, the classification is performed on only one of the generated signals to minimize computational load without sacrificing accuracy. The proposed ODR method was validated using experimental data. The classification results show that the proposed method generally outperforms the conventional classification method. The results support the proposed concept of using ODR signals in diagnosis procedures for journal bearing systems.

  14. Analysis of HD Journal Bearings Considering Elastic Deformation and Non-Newtonian Rabinowitsch Fluid Model

    Directory of Open Access Journals (Sweden)

    J. Javorova

    2016-06-01

    Full Text Available The purpose of this paper is to study the performance of a finite length journal bearing, taking into account effects of non-Newtonian Rabinowitsch flow rheology and elastic deformations of the bearing liner. According to the Rabinowitsch fluid model, the cubic-stress constitutive equation is used to account for the non-Newtonian effects of pseudoplastic and dilatant lubricants. Integrating the continuity equation across the film, the nonlinear non-Newtonian Reynolds-type equation is derived. The elasticity part of the problem is solved on the base of Vlassov model of an elastic foundation. The numerical solution of the modified Reynolds equation is carried out by using FDM with over-relaxation technique. The results for steady state bearing performance characteristics have been calculated for various values of nonlinear factor and elasticity parameters. It was concluded that in comparison with the Newtonian lubricants, higher values of film pressure and load carrying capacity have been obtained for dilatant lubricants, while the case was reversed for pseudoplastic lubricants.

  15. Some Experimental and Simulation Results on the Dynamic Behaviour of Spur and Helical Geared Transmissions with Journal Bearings

    Directory of Open Access Journals (Sweden)

    R. Fargère

    2012-01-01

    Full Text Available Some interactions between the dynamic and tribological behaviour of geared transmissions are examined, and a number of experimental and simulation results are compared. A model is introduced which incorporates most of the possible interactions between gears, shafts and hydrodynamic journal bearings. It combines (i a specific element for wide-faced gears that includes the normal contact conditions between actual mating teeth, that is, with tooth shape deviations and mounting errors, (ii shaft finite elements, and (iii the external forces generated by journal bearings determined by directly solving Reynolds' equation. The simulation results are compared with the measurement obtained on a high-precision test rig with single-stage spur and helical gears supported by hydrodynamic journal bearings. The experimental and simulation results compare well thus validating the simulation strategy both at the global and local scales.

  16. Characterization of High-Power Turbomachinery Tilting Pad Journal Bearings: First Results Obtained on a Novel Test Bench

    Directory of Open Access Journals (Sweden)

    Enrico Ciulli

    2018-01-01

    Full Text Available Tilting pad journal bearings are usually employed in turbomachines for their stable behavior at high rotational speeds. Devoted test rigs have been realized to validate the predictions of theoretical models. However, the design of new high-performance and large-size bearings needs to be supported by experimental investigations on high-performance large test rigs. The main characteristics of a recently built facility for testing large tilting pad journal bearings with diameters from 150 to 300 mm are described in this work. The test rig is versatile and can be used to test bearings of different size, configurations and to investigate the influence of many parameters, even the effect of misalignment. Sample results of the static characterization of a four-pad high-performance tilting pad journal bearing are reported evidencing some transient effects. A few sample dynamic results are also reported. The presented experimental results demonstrated the capabilities of the rig for investigating the static and the dynamic characteristics of the bearings accurately measuring slow and fast variables.

  17. Feasibility of Influencing the Dynamic Fluid Film Coefficients of a Multirecess Journal Bearing by means of Active Hybrid Lubrication

    DEFF Research Database (Denmark)

    Santos, Ilmar; Watanabe, F. Y.

    2003-01-01

    and control techniques. The feasibility of influencing the dynamic fluid film coefficients (stiffness and damping) by means of a controllable fluid injection into opposed bearing recesses is investigated. By controlling the pressure and flow injection using servo control systems, it is possible to obtain......The main objective of this research project is the investigation of multirecess hydrostatic journal bearings with active hybrid (hydrostatic and hydrodynamic) lubrication. This paper gives a theoretical contribution to the modeling of this kind of bearing, combining computational fluid dynamics...

  18. Compensation of Cross-Coupling Stiffness and Increase of Direct Damping in Multirecess Journal Bearings using Active Hybrid Lubrication

    DEFF Research Database (Denmark)

    Santos, Ilmar; Watanabe, F.Y.

    2004-01-01

    journal bearings (HJB). When part of hydrostatic pressure is also dynamically modified by means of hydraulic control systems, one refers to the active lubrication. The main contribution of the present theoretical work is to show that it is possible to reduce cross-coupling stiffness and increase...

  19. Active tilting-pad journal bearings supporting flexible rotors: Part II–The model-based feedback-controlled lubrication

    DEFF Research Database (Denmark)

    Salazar, Jorge Andrés González; Santos, Ilmar

    2017-01-01

    This is part II of a twofold paper series dealing with the design and implementation of model-based controllers meant for assisting the hybrid and developing the feedback-controlled lubrication regimes in active tilting pad journal bearings (active TPJBs). In both papers theoretical and experimen......This is part II of a twofold paper series dealing with the design and implementation of model-based controllers meant for assisting the hybrid and developing the feedback-controlled lubrication regimes in active tilting pad journal bearings (active TPJBs). In both papers theoretical...... and experimental analyses are presented with focus on the reduction of rotor lateral vibration. This part is devoted to synthesising model-based LQG optimal controllers (LQR regulator + Kalman Filter) for the feedback-controlled lubrication and is based upon the mathematical model of the rotor-bearing system...

  20. Application of computational fluid dynamics and fluid structure interaction techniques for calculating the 3D transient flow of journal bearings coupled with rotor systems

    Science.gov (United States)

    Li, Qiang; Yu, Guichang; Liu, Shulian; Zheng, Shuiying

    2012-09-01

    Journal bearings are important parts to keep the high dynamic performance of rotor machinery. Some methods have already been proposed to analysis the flow field of journal bearings, and in most of these methods simplified physical model and classic Reynolds equation are always applied. While the application of the general computational fluid dynamics (CFD)-fluid structure interaction (FSI) techniques is more beneficial for analysis of the fluid field in a journal bearing when more detailed solutions are needed. This paper deals with the quasi-coupling calculation of transient fluid dynamics of oil film in journal bearings and rotor dynamics with CFD-FSI techniques. The fluid dynamics of oil film is calculated by applying the so-called "dynamic mesh" technique. A new mesh movement approach is presented while the dynamic mesh models provided by FLUENT are not suitable for the transient oil flow in journal bearings. The proposed mesh movement approach is based on the structured mesh. When the journal moves, the movement distance of every grid in the flow field of bearing can be calculated, and then the update of the volume mesh can be handled automatically by user defined function (UDF). The journal displacement at each time step is obtained by solving the moving equations of the rotor-bearing system under the known oil film force condition. A case study is carried out to calculate the locus of the journal center and pressure distribution of the journal in order to prove the feasibility of this method. The calculating results indicate that the proposed method can predict the transient flow field of a journal bearing in a rotor-bearing system where more realistic models are involved. The presented calculation method provides a basis for studying the nonlinear dynamic behavior of a general rotor-bearing system.

  1. Laser-optical and numerical Research of the flow inside the lubricating gap of a journal bearing model

    Directory of Open Access Journals (Sweden)

    Riedel M.

    2013-04-01

    Full Text Available The laser-optical research of the flow inside the lubricating gap of a journal bearing model is one important task in a larger overall project. The long-term objective is the development of an easy-to-work calculation tool which delivers information about the causes and consequences of cavitation processes in hydrodynamically lubricated journal bearings. Hence, it will be possible to find statements for advantageous and disadvantageous geometrical shapes of the bushings. In conclusion such a calculation tool can provide important insights for the construction and design of future journal bearings. Current design programs are based on a two-dimensional approach for the lubricating gap. The first dimension is the breath of the bearing and the second dimension is the circumferential direction of the bearing. The third dimension, the expansion of the gap in radial direction, will be neglected. Instead of an exact resolution of the flow pattern inside the gap, turbulence models are in use. Past studies on numerical and experimental field have shown that inside the lubricating gap clearly organized and predominantly laminar flow structures can be found. Thus, for a detailed analysis of the reasons and effects of cavitation bubbles, a three-dimensional resolution of the lubricating gap is inevitable. In addition to the qualitative evaluation of the flow with visualization experiments it is possible to perform angle-based velocity measurements inside the gap with the help of a triggered Laser-Doppler- Velocimeter (LDV. The results of these measurements are used to validate three-dimensional CFD flow simulations, and to optimize the numerical mesh structure and the boundary conditions. This paper will present the experimental setup of the bearing model, some exemplary results of the visualization experiments and LDV measurements as well as a comparison between experimental and numerical results.

  2. Feedback-controlled lubrication for reducing the lateral vibration of flexible rotors supported by tilting-pad journal bearings

    DEFF Research Database (Denmark)

    Salazar, Jorge Andrés González; Santos, Ilmar

    2015-01-01

    The feedback-controlled lubrication regime, based on a model-free designed proportional–derivative controller, is experimentally investigated in a flexible rotor mounted on an actively-lubricated tilting-pad journal bearing. With such a lubrication regime, both the resulting pressure distribution...... over the pads and hence the bearing dynamic properties are dynamically modified. The control strategy is focused on reducing the lateral vibrations of the system around its operational equilibrium within a wide frequency range. To synthesize the proportional–derivative controller gains, an objective...

  3. Active lubrication applied to radial gas journal bearings. Part 1: Modeling

    DEFF Research Database (Denmark)

    Morosi, Stefano; Santos, Ilmar

    2011-01-01

    by regulating radial injection of lubricant through the means of piezoelectric actuators mounted on the back of the bearing sleeves. A feedback law is used to couple the dynamic of a simplified rotor-bearing system with the pneumatic and dynamic characteristics of a piezoelectric actuated valve system. Selected...

  4. Mathematical Model and Analysis of the Water-Lubricated Hydrostatic Journal Bearings considering the Translational and Tilting Motions

    Directory of Open Access Journals (Sweden)

    Hui-Hui Feng

    2014-01-01

    Full Text Available The water-lubricated bearings have been paid attention for their advantages to reduce the power loss and temperature rise and increase load capacity at high speed. To fully study the complete dynamic coefficients of two water-lubricated, hydrostatic journal bearings used to support a rigid rotor, a four-degree-of-freedom model considering the translational and tilting motion is presented. The effects of tilting ratio, rotary speed, and eccentricity ratio on the static and dynamic performances of the bearings are investigated. The bulk turbulent Reynolds equation is adopted. The finite difference method and a linear perturbation method are used to calculate the zeroth- and first-order pressure fields to obtain the static and dynamic coefficients. The results suggest that when the tilting ratio is smaller than 0.4 or the eccentricity ratio is smaller than 0.1, the static and dynamic characteristics are relatively insensitive to the tilting and eccentricity ratios; however, for larger tilting or eccentricity ratios, the tilting and eccentric effects should be fully considered. Meanwhile, the rotary speed significantly affects the performance of the hydrostatic, water-lubricated bearings.

  5. Design curves for optimizing stability of herringbone-grooved journal bearings

    Science.gov (United States)

    Fleming, D. P.; Hamrock, B. J.

    1973-01-01

    Curves span wide range of operating conditions, including: lubricant compressibility numbers from 0 to 80, bearing length-to-diameter ratios from 1/4 to 2, and either rotating or stationary grooved members.

  6. Feedback-Controlled Lubrication for Reducing the Lateral Vibration of Flexible Rotors supported by Tilting-Pad Journal Bearings

    DEFF Research Database (Denmark)

    Salazar, Jorge Andrés González; Santos, Ilmar

    2014-01-01

    In this work, the feedback-controlled lubrication regime, based on a model-free designed proportional-derivative (PD) controller, is studied and experimentally tested in a flexible rotor mounted on an actively-lubricated tilting-pad journal bearing (active TPJB). With such a lubrication regime......, both the resulting pressure distribution over the pads and hence the bearing dynamic properties are dynamically modified. The control strategy is focused on reducing the system lateral vibration around its operational equilibrium position in a wide frequency range. For this purpose, servovalves...... are used as actuators and the flexible rotor lateral movements as feedback control signals. To synthesise the PD controller gains an objective function is optimized in the stabilizing gain domain and then chosen from a subdomain imposed by the servovalves restrictions. The D-decomposition approach expanded...

  7. US State Submerged Lands

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Submerged Lands Act (43 U.S.C. Section 1301 et seq.) grants coastal states title to natural resources located within their coastal submerged lands and navigable...

  8. Effect of semi-circular wavy liner on performance of journal bearing

    Science.gov (United States)

    Sheriff, Jamaluddin Md.; Osman, Kahar; Asral

    2012-06-01

    The amount of lubricant present in a bearing can affect its performance. This study compares the load carrying capacity of wavy and smooth surfaces liner bearing so that the potential advantages of the former could be identified. Both types of bearing used palm oil as lubricant and computational analysis was developed to predict the numerical data for full film lubrication condition. The bearing model was 60 mm in diameter and its ratio of length to diameter was 0.5 with clearance and amplitude of 250μm and 200μm respectively. All cases studied included temperature effect under steady flow conditions with speed between 200 and 5000 rpm. The results show, for low eccentricity ratio, semi circular wavy liner bearings were able to produce higher load carrying capacity. The results also show that the overall temperature drop for wavy liner surfaces was higher for all test conditions. The shaft speeds, however, have no direct effect on the magnitude of the load carrying capacity.

  9. Design Optimization of Tilting-Pad Journal Bearing Using a Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    Hamit Saruhan

    2004-01-01

    Full Text Available This article focuses on the use of genetic algorithms in developing an efficient optimum design method for tilting pad bearings. The approach optimizes based on minimum film thickness, power loss, maximum film temperature, and a global objective. Results for a five tilting-pad preloaded bearing are presented to provide a comparison with more traditional optimum design methods such as the gradient-based global criterion method, and also to provide insight into the potential of genetic algorithms in the design of rotor bearings. Genetic algorithms are efficient search techniques based on the idea of natural selection and genetics. These robust methods have gained recognition as general problem solving techniques in many applications.

  10. Nonlinear Analysis of Rotors Supported by Air Foil Journal Bearings – Theory and Experiments

    DEFF Research Database (Denmark)

    Larsen, Jon Steffen

    the nonlinear dynamic behaviour of AFBs, both isolated and coupled with the rotor. Large emphasis is put on the experimental validation of the obtained theoretical results. Two experimental test rigs were designed and manufactured specifically for this purpose. With the first rig, the isolated nonlinear......Direct driven compressors supported by air foil bearings (AFB) are gaining increasing popularity, for example within the waste water treatment industry where the demand for larger machines up to 250 kW is growing. In order to keep production costs low, the shaft and bearing design need to be simple...... and allow manufacturing using conventional materials and production facilities. As a consequence, the assembled rotor weight can be up to 50 kg. The compressors are operated at variable speed and load and are subjected to several starts and stops per day. Therefore, the rotor bearing design must be robust...

  11. Experimental analysis of a rigid rotor supported on aerodynamic foil journal bearings

    Directory of Open Access Journals (Sweden)

    Arghir M.

    2014-01-01

    Full Text Available Aerodynamic foil bearings are highly non linear components used or intending to be used for supporting high speed rotors (>30 krpm of low size rotating machines (<400 kW. The non linear character comes from the highly deformable structure of the bearing made of thin steel sheets and from the Coulomb friction forces arising during dynamic displacements. The present work shows the non linear response of a rigid rotor supported by a pair of such bearings and entrained at 82 krpm. The measurements performed during the coast down revealed sub synchronous and asynchronous vibrations of the rotor and their multiples. A simplified theoretical model reproduces qualitatively some of these non linear characteristics.

  12. Active lubrication applied to radial gas journal bearings. Part 2: Modelling improvement and experimental validation

    DEFF Research Database (Denmark)

    Pierart, Fabián G.; Santos, Ilmar F.

    2016-01-01

    Actively-controlled lubrication techniques are applied to radial gas bearings aiming at enhancing one of their most critical drawbacks, their lack of damping. A model-based control design approach is presented using simple feedback control laws, i.e. proportional controllers. The design approach...... by finite element method and the global model is used as control design tool. Active lubrication allows for significant increase in damping factor of the rotor-bearing system. Very good agreement between theory and experiment is obtained, supporting the multi-physic design tool developed....

  13. Tribaloy alloy reinforced tin-bronze composite coating for journal bearing applications

    National Research Council Canada - National Science Library

    Gao, F; Liu, R; Wu, X.J

    2011-01-01

    .... The improved-ductility Tribaloy alloy (T-401) particles are selected as the reinforcement. This coating is made on the bushing of planet journals used in aerospace engines, deposited with the high velocity oxygen fuel (HVOF...

  14. A new derivation for journal bearing stiffness and damping coefficients in polar coordinates

    Science.gov (United States)

    Wang, J. K.; Khonsari, M. M.

    2006-02-01

    A general derivation for obtaining bearing dynamic coefficients in polar coordinates is presented. It is shown that this derivation is simple and consistent with the commonly used formulae for the linearized stiffness and damping coefficients. What is more important is that the physical meaning of this derivation is clearer and simpler.

  15. Linear and Non-Linear Control Techniques Applied to Actively Lubricated Journal Bearings

    DEFF Research Database (Denmark)

    Nicoletti, Rodrigo; Santos, Ilmar

    2003-01-01

    The main objectives of actively lubricated bearings are the simultaneous reduction of wear and vibration between rotating and stationary machinery parts. For reducing wear and dissipating vibration energy until certain limits, one can count with the conventional hydrodynamic lubrication. For furt...

  16. Analysis of wear properties of aluminium based journal bearing alloys with and without lubrication.

    Science.gov (United States)

    Mathavan, J. Joy; Patnaik, Amar

    2016-09-01

    Apart from classical bearing materials, Aluminium alloys are used as bearing materials these days because of their superior quality. In this analysis, new Aluminium based bearing materials, with filler metals Si, Ni, and Cr are prepared by metal mould casting in burnout furnace machine, and tribological properties of these alloys with and without lubrication were tested. The experiments for wear with lubrication are conducted on multiple specimen tester and experiments without lubrication is conducted on Pin on disk tribometer. The disc material used was SAE 1050 steel. Wear tests were conducted at a sliding speed of 0.785 m/s and at a normal load of 20 N. Coefficient of friction values, temperature changes and wear of the specimens were plotted on graph according to the above mentioned working conditions. Hardness and weight losses of the specimens were calculated. The obtained results demonstrate how the friction and wear properties of these samples have changed with the % addition of Silicon, Chromium and Nickel to the base metal aluminium.

  17. A correlation between engine oil rheology and oil film thickness in engine journal bearings

    Energy Technology Data Exchange (ETDEWEB)

    Bates, T.W.; Williamson, B.; Spearot, J.A.; Murphy, C.K.

    1986-01-01

    Oil film thickness measurements made in the front main bearing of an operating 3.8 L, V-6 engine were compared with rheological measurements made on a series of commercial and experimental oil blends. High-temperature, high-shear-rate viscosity measurements correlated with the film thicknesses of all single-grade and many multigrade oils. However, the film thicknesses provided by some multigrade oils were larger than could be accounted for by their high-temperature, high-shear-rate viscosities alone. Although the pressure-viscosity coefficients of some of the oils were significantly different from those of the majority of oils tested, they were not oils which produced unusual film thicknesses. As a consequence, correcting oil viscosities for the estimated pressures acting within the bearing was unsuccessful in improving the correlations. The correlations were improved, however, by accounting for the elastic properties of the multigrade oils. Measurements of oil relaxation times at high temperatures and shear rates showed large differences in elastic properties among the test oils. A good correlation (R/sup 2/ = 0.73) was obtained from a multiple linear regression of film thickness as a function of both high-temperature, high-shear-rate viscosities and relaxation times.

  18. Friction and Wear Reduction of Eccentric Journal Bearing Made of Sn-Based Babbitt for Ore Cone Crusher

    Directory of Open Access Journals (Sweden)

    Auezhan Amanov

    2016-11-01

    Full Text Available An anti-friction Babbitt alloy-coated bearing made by a casting process is a journal bearing, which is used in an ore cone crusher eccentric. The main purpose of the Babbitt coated eccentric is to provide a low friction to support and guide a rotating shaft. Despite the fact that the Babbitt-coated eccentric offers a low friction coefficient and can be operated without a continuous supply of lubricant, it suffers from mining environments and short service life. In this study, an ultrasonic nanocrystalline surface modification (UNSM technique was used to further reduce the friction coefficient, to increase the wear resistance, and to extend the service life of the Sn-based Babbitt metal. The friction and wear behavior of the Sn-based Babbitt metal was investigated using a block-on-ring tester under both dry and oil-lubricated conditions. The results of the experiments revealed that the friction and wear behavior of Sn-based Babbitt metal could be improved by the application of the UNSM technique. The friction and wear mechanisms of the specimens were explained and discussed in terms of changes in surface properties—microstructure, surface hardness, surface roughness, etc.

  19. Friction and Wear Reduction of Eccentric Journal Bearing Made of Sn-Based Babbitt for Ore Cone Crusher

    Science.gov (United States)

    Amanov, Auezhan; Ahn, Byungmin; Lee, Moon Gu; Jeon, Yongho; Pyun, Young-Sik

    2016-01-01

    An anti-friction Babbitt alloy-coated bearing made by a casting process is a journal bearing, which is used in an ore cone crusher eccentric. The main purpose of the Babbitt coated eccentric is to provide a low friction to support and guide a rotating shaft. Despite the fact that the Babbitt-coated eccentric offers a low friction coefficient and can be operated without a continuous supply of lubricant, it suffers from mining environments and short service life. In this study, an ultrasonic nanocrystalline surface modification (UNSM) technique was used to further reduce the friction coefficient, to increase the wear resistance, and to extend the service life of the Sn-based Babbitt metal. The friction and wear behavior of the Sn-based Babbitt metal was investigated using a block-on-ring tester under both dry and oil-lubricated conditions. The results of the experiments revealed that the friction and wear behavior of Sn-based Babbitt metal could be improved by the application of the UNSM technique. The friction and wear mechanisms of the specimens were explained and discussed in terms of changes in surface properties—microstructure, surface hardness, surface roughness, etc. PMID:28774070

  20. Cars submerged in water.

    NARCIS (Netherlands)

    2010-01-01

    Crashes in which cars are submerged in deep water or in a ditch are often complicated and serious. Considering their severity and the fact that approximately half the fatalities in this crash type are not due to drowning but to injury, preventive measures are to be preferred above measures that have

  1. Steady state characteristics of a tilting pad journal bearing with controllable lubrication: Comparison between theoretical and experimental results

    DEFF Research Database (Denmark)

    Cerda Varela, Alejandro Javier; Nielsen, Bo Bjerregaard; Santos, Ilmar

    2013-01-01

    elastothermohydrodynamic lubrication regime), as well as using a test rig designed and built to this effect. The comparison between experimental and theoretical results provides solid ground to determine the accuracy of the available model for the the prediction of the steady-state behavior of the tilting-pad bearing...

  2. Optimization of submerged vane parameters

    Indian Academy of Sciences (India)

    Submerged vanes are airfoils which are in general placed at certain angle with respect to the flow direction in a channel to induce artificial circulations downstream. By virtue of these artificially generated circulations, submerged vanes were utilized to protect banks of rivers against erosion, to control shifting of rivers, to avoid ...

  3. Optimization of submerged vane parameters

    Indian Academy of Sciences (India)

    H Sharma

    velocities simulated from CFD using standard k-x model were very much in accordance with what it was measured by Wang and Odgaard [4]. Thus, model can be used to study the turbulence characteristics around submerged vanes and to predict various parameters downstream of the submerged vanes. After the model ...

  4. Journal

    OpenAIRE

    Kessler, Comte Harry; Drost, Julia; Kirchner, Thomas; Kostka, Alexandre; Le Normand-Romain, Antoinette; Raulff, Ulrich; Recht, Roland

    2017-01-01

    Le comte Harry Kessler (1868–1937) est une figure essentielle de la vie des arts en Europe à la fin du XIXe et au début du XXe siècle. Sa triple éducation allemande, anglaise et française le voue dès l’origine à une mobilité qui devient bientôt le maître-mot de son existence de collectionneur et de mécène, de critique, de directeur de musée. Resté longtemps inédit, le Journal qu’il a tenu pendant près de soixante ans en est le dépôt et le témoin assidu. Les quelque dix mille pages manuscrites...

  5. Journal

    OpenAIRE

    Reinhold Lenz, Jakob Michael

    2017-01-01

    Je dois, mon cher Goethe, pour la bonne compréhension de ce que tu vas lire, te faire part avant tout de quelques informations. J’ai écrit ce journal sous les yeux de mon pire ennemi, dont j’étais tributaire, dans une langue qu’il ne comprenait pas et d’où j’ai traduit littéralement ce qui suit. Il regardait de temps en temps par-dessus mon épaule. Scipion, avec qui j’avais fait un voyage en Allemagne, avait à X une promise dont il dut à plusieurs reprises s’éloigner pour des périodes de quat...

  6. Submerged AUV Charging Station

    Science.gov (United States)

    Jones, Jack A.; Chao, Yi; Curtin, Thomas

    2014-01-01

    Autonomous Underwater Vehicles (AUVs) are becoming increasingly important for military surveillance and mine detection. Most AUVs are battery powered and have limited lifetimes of a few days to a few weeks. This greatly limits the distance that AUVs can travel underwater. Using a series of submerged AUV charging stations, AUVs could travel a limited distance to the next charging station, recharge its batteries, and continue to the next charging station, thus traveling great distances in a relatively short time, similar to the Old West “Pony Express.” One solution is to use temperature differences at various depths in the ocean to produce electricity, which is then stored in a submerged battery. It is preferred to have the upper buoy submerged a reasonable distance below the surface, so as not to be seen from above and not to be inadvertently destroyed by storms or ocean going vessels. In a previous invention, a phase change material (PCM) is melted (expanded) at warm temperatures, for example, 15 °C, and frozen (contracted) at cooler temperatures, for example, 8 °C. Tubes containing the PCM, which could be paraffin such as pentadecane, would be inserted into a container filled with hydraulic oil. When the PCM is melted (expanded), it pushes the oil out into a container that is pressurized to about 3,000 psi (approx equals 20.7 MPa). When a valve is opened, the high-pressure oil passes through a hydraulic motor, which turns a generator and charges a battery. The low-pressure oil is finally reabsorbed into the PCM canister when the PCM tubes are frozen (contracted). Some of the electricity produced could be used to control an external bladder or a motor to the tether line, such that depth cycling is continued for a very long period of time. Alternatively, after the electricity is generated by the hydraulic motor, the exiting low-pressure oil from the hydraulic motor could be vented directly to an external bladder on the AUV, such that filling of the bladder

  7. Drought and submergence tolerance in plants

    Science.gov (United States)

    Du, Hewei; Zhou, Yufan; Oksenberg, Nir; Ronald, Pamela

    2017-11-14

    The invention provides methods of genetically modified plants to increase tolerance to drought and/or submergence. The invention additionally provides plants having increased drought and/or submergence tolerance engineered using such methods.

  8. Submerged membrane distillation for desalination of water

    KAUST Repository

    Francis, Lijo

    2016-10-27

    Submerged membrane modules for use for desalination of water are disclosed. In one or more aspects, the membrane modules can be submerged either in a feed solution tank or the feed solution can pass through the lumen side of the membrane submerged within the tank. The feed solution can be a water-based feed stream containing an amount of salt.

  9. Oxygen absorption by adventitious roots promotes the survival of completely submerged terrestrial plants.

    Science.gov (United States)

    Ayi, Qiaoli; Zeng, Bo; Liu, Jianhui; Li, Siqi; van Bodegom, Peter M; Cornelissen, Johannes H C

    2016-04-10

    oxygen deficiency, enabling efficient utilization of carbohydrates and delaying the death of completely submerged plants. © The Author 2016. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  10. On the future of controllable fluid film bearings

    DEFF Research Database (Denmark)

    Santos, Ilmar

    2011-01-01

    lubrication regimes, i.e., as tilting-pad journal bearings, multi-recess journal bearings and plain journal bearings. After a comprehensive overview of the theoretical and experimental technological advancements achieved in university laboratories, the feasibility of industrial applications is highlighted......, trying to foresee the future trends of such mechatronic devices....

  11. Improving the Properties of Wood Laminates for Bearings of Ship Mechanisms,

    Science.gov (United States)

    The compression bonding of wood veneers and layers of cotton fabric with SBS-1 resin gave laminated components for use as submerged bearings in ship...impact strength and lower swelling in water than other wood resin laminates. (Author)

  12. Flow and scour around vertical submerged structures

    Indian Academy of Sciences (India)

    Although past investigations establish the effect of various parameters on scour around vertical submerged structures for live and clear water condition, yet further studies are required to analyze the scour around group of submerged structures for various bed sediments, understand the flow physics around the group and ...

  13. Differential Response of Floating and Submerged Leaves of Longleaf Pondweed to Silver Ions

    Directory of Open Access Journals (Sweden)

    Nisha Shabnam

    2017-06-01

    Full Text Available In this study, we have investigated variations in the potential of floating and submerged leaves of longleaf pondweed (Potamogeton nodosus to withstand silver ion (Ag+-toxicity. Both floating and submerged leaves changed clear colorless AgNO3 solutions to colloidal brown in the presence of light. Transmission electron microscopy revealed the presence of distinct crystalline Ag-nanoparticles (Ag-NPs in these brown solutions. Powder X-ray diffraction pattern showed that Ag-NPs were composed of Ag0 and Ag2O. Photosystem (PS II efficiency of leaves declined upon exposure to Ag+ with a significantly higher decline in the submerged leaves than in the floating leaves. Similarly, Ag+ treatment caused a significant reduction in the carboxylase activity of the ribulose bisphosphate carboxylase/oxygenase in leaves. The reduction in this carboxylase activity was significantly higher in the submerged than in the floating leaves. Ag+ treatment also resulted in a significant decline in the levels of non-enzymatic and enzymatic antioxidants; the decline was significantly lower in the floating than in submerged leaves. X-ray photoelectron spectroscopy revealed the presence of Ag2O in these leaves. Inductively coupled plasma mass spectrometry analysis revealed a three-fold higher Ag content in the submerged than in floating leaves. Our study demonstrates that floating leaves of longleaf pondweed have a superior potential to counter Ag+-toxicity compared with submerged leaves, which could be due to superior potential of floating leaves to reduce Ag+ to less/non-toxic Ag0/Ag2O-nanoparticles/nanocomplexes. We suggest that modulating the genotype of longleaf pondweed to bear higher proportion of floating leaves would help in cleaning fresh water bodies contaminated with ionic forms of heavy metals.

  14. Iodine Removal Efficiency in Non-Submerged and Submerged Self-Priming Venturi Scrubber

    Energy Technology Data Exchange (ETDEWEB)

    Ali, Majid; Yan, Changqi; Sun, Zhongning; Gu, Haifeng; Wang, Junlong; Mehboob; Khurram [Harbin Engineering Univ., Harbin (China)

    2013-04-15

    The objective of this conducted research is to study the iodine removal efficiency in a self-priming venturi scrubber for submerged and non-submerged operating conditions experimentally and theoretically. The alkaline solution is used as an absorbent, which is prepared by dissolving sodium hydroxide (NaOH) and sodium thiosulphate (Na{sub 2}S{sub 2}O{sub 3}) in water to remove the gaseous iodine (I{sub 2}) from the gas. Iodine removal efficiency is examined at various gas flow rates and inlet concentrations of iodine for submerged and non-submerged operating conditions. In the non-submerged venturi scrubber, only the droplets take part in iodine removal efficiency. However, in a submerged venturi scrubber condition, the iodine gas is absorbed from gas to droplets inside the venturi scrubber and from bubbles to surrounding liquid at the outlet of a venturi scrubber. Experimentally, it is observed that the iodine removal efficiency is greater in the submerged venturi scrubber as compare to a non-submerged venturi scrubber condition. The highest iodine removal efficiency of 0.99±0.001 has been achieved in a submerged self-priming venturi scrubber condition. A mathematical correlation is used to predict the theoretical iodine removal efficiency in submerged and non-submerged conditions, and it is compared against the experimental results. The Wilkinson et al. correlation is used to predict the bubble diameter theoretically whereas the Nukiyama and Tanasawa correlation is used for droplet diameter. The mass transfer coefficient for the gas phase is calculated from the Steinberger and Treybal correlation. The calculated results for a submerged venturi scrubber agree well with experimental results but underpredicts in the case of the non-submerged venturi scrubber.

  15. IODINE REMOVAL EFFICIENCY IN NON-SUBMERGED AND SUBMERGED SELF-PRIMING VENTURI SCRUBBER

    Directory of Open Access Journals (Sweden)

    MAJID ALI

    2013-04-01

    Full Text Available The objective of this conducted research is to study the iodine removal efficiency in a self-priming venturi scrubber for submerged and non-submerged operating conditions experimentally and theoretically. The alkaline solution is used as an absorbent, which is prepared by dissolving sodium hydroxide (NaOH and sodium thiosulphate (Na2S2O3 in water to remove the gaseous iodine (I2 from the gas. Iodine removal efficiency is examined at various gas flow rates and inlet concentrations of iodine for submerged and non-submerged operating conditions. In the non-submerged venturi scrubber, only the droplets take part in iodine removal efficiency. However, in a submerged venturi scrubber condition, the iodine gas is absorbed from gas to droplets inside the venturi scrubber and from bubbles to surrounding liquid at the outlet of a venturi scrubber. Experimentally, it is observed that the iodine removal efficiency is greater in the submerged venturi scrubber as compare to a non-submerged venturi scrubber condition. The highest iodine removal efficiency of 0.99±0.001 has been achieved in a submerged self-priming venturi scrubber condition. A mathematical correlation is used to predict the theoretical iodine removal efficiency in submerged and non-submerged conditions, and it is compared against the experimental results. The Wilkinson et al. correlation is used to predict the bubble diameter theoretically whereas the Nukiyama and Tanasawa correlation is used for droplet diameter. The mass transfer coefficient for the gas phase is calculated from the Steinberger and Treybal correlation. The calculated results for a submerged venturi scrubber agree well with experimental results but underpredicts in the case of the non-submerged venturi scrubber.

  16. Load responsive hydrodynamic bearing

    Science.gov (United States)

    Kalsi, Manmohan S.; Somogyi, Dezso; Dietle, Lannie L.

    2002-01-01

    A load responsive hydrodynamic bearing is provided in the form of a thrust bearing or journal bearing for supporting, guiding and lubricating a relatively rotatable member to minimize wear thereof responsive to relative rotation under severe load. In the space between spaced relatively rotatable members and in the presence of a liquid or grease lubricant, one or more continuous ring shaped integral generally circular bearing bodies each define at least one dynamic surface and a plurality of support regions. Each of the support regions defines a static surface which is oriented in generally opposed relation with the dynamic surface for contact with one of the relatively rotatable members. A plurality of flexing regions are defined by the generally circular body of the bearing and are integral with and located between adjacent support regions. Each of the flexing regions has a first beam-like element being connected by an integral flexible hinge with one of the support regions and a second beam-like element having an integral flexible hinge connection with an adjacent support region. A least one local weakening geometry of the flexing region is located intermediate the first and second beam-like elements. In response to application of load from one of the relatively rotatable elements to the bearing, the beam-like elements and the local weakening geometry become flexed, causing the dynamic surface to deform and establish a hydrodynamic geometry for wedging lubricant into the dynamic interface.

  17. Suspension of Egg Hatching Caused by High Humidity and Submergence in Spider Mites.

    Science.gov (United States)

    Ubara, Masashi; Osakabe, Masahiro

    2015-08-01

    We tested the effects of high humidity and submergence on egg hatching of spider mites. In both the high humidity and submergence treatments, many Tetranychus and Panonychus eggs did not hatch until after the hatching peak of the lower humidity or unsubmerged controls. However, after humidity decreased or water was drained, many eggs hatched within 1-3 h. This was observed regardless of when high humidity or submergence treatments were implemented: either immediately after oviposition or immediately before hatching was due. Normal eyespot formation was observed in most eggs in the high humidity and submergence treatments, which indicates that spider mite embryos develop even when eggs are underwater. Therefore, delays in hatching are not caused by delayed embryonic development. A delay in hatching was always observed in Panonychus citri (McGregor) but was more variable in Tetranychus urticae Koch and Tetranychus kanzawai Kishida. The high humidity and submergence treatments affected but did not suppress larval development in these species. In contrast, many Oligonychus eggs died following the high humidity treatments. In Tetranychus and Panonychus spider mites, suspension of egg hatching may mitigate the adverse effects of rainfall. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  18. Grizzly bear

    Science.gov (United States)

    Schwartz, C.C.; Miller, S.D.; Haroldson, M.A.; Feldhamer, G.; Thompson, B.; Chapman, J.

    2003-01-01

    The grizzly bear inspires fear, awe, and respect in humans to a degree unmatched by any other North American wild mammal. Like other bear species, it can inflict serious injury and death on humans and sometimes does. Unlike the polar bear (Ursus maritimus) of the sparsely inhabited northern arctic, however, grizzly bears still live in areas visited by crowds of people, where presence of the grizzly remains physically real and emotionally dominant. A hike in the wilderness that includes grizzly bears is different from a stroll in a forest from which grizzly bears have been purged; nighttime conversations around the campfire and dreams in the tent reflect the presence of the great bear. Contributing to the aura of the grizzly bear is the mixture of myth and reality about its ferocity. unpredictable disposition, large size, strength, huge canines, long claws, keen senses, swiftness, and playfulness. They share characteristics with humans such as generalist life history strategies. extended periods of maternal care, and omnivorous diets. These factors capture the human imagination in ways distinct from other North American mammals. Precontact Native American legends reflected the same fascination with the grizzly bear as modern stories and legends (Rockwell 1991).

  19. Impeller Submergence Depth for Stirred Tanks

    Directory of Open Access Journals (Sweden)

    Thiyam T. Devi

    2011-11-01

    Full Text Available Impeller submergence governs the performance of mixing tanks employed in oxygen transfer operation. Present work experimentally investigates the effect of impeller submergence depths on oxygen transfer and corresponding power consumption. It has been found that at higher range of impeller submergence, mixing tanks consume less power and gives higher values of oxygen transfer coefficient. Optimal range of submergence depth is 0.7 to 0.9 times the impeller diameter. Copyright ©2011 BCREC UNDIP. All rights reserved.(Received: 4th March 2011; Revised: 12nd July 2011; Accepted: 14th July 2011[How to Cite: T.T. Devi, A.P. Sinha, M. Thakre, and B. Kumar. (2011. Impeller Submergence Depth for Stirred Tanks. Bulletin of Chemical Reaction Engineering & Catalysis, 6 (2: 123-128. doi:10.9767/bcrec.6.2.826.123-128][How to Link / DOI: http://dx.doi.org/10.9767/bcrec.6.2.826.123-128 || or local: http://ejournal.undip.ac.id/index.php/bcrec/article/view/826] | View in 

  20. Laser Beam Submerged Arc Hybrid Welding

    Science.gov (United States)

    Reisgen, Uwe; Olschok, Simon; Jakobs, Stefan; Schleser, Markus; Mokrov, Oleg; Rossiter, Eduardo

    The laser beam-submerged arc hybrid welding method originates from the knowledge that, with increasing penetration depth, the laser beam process has a tendency to pore formation in the lower weld regions. The coupling with the energy-efficient submerged-arc process improves degassing and reduces the tendency to pore formation. The high deposition rate of the SA process in combination with the laser beam process offers, providing the appropriate choice of weld preparation, the possibility of welding plates with a thickness larger than 20° mm in a single pass, and also of welding thicker plates with the double-sided single pass technique.

  1. Plotting and Determination of Nominal Stresses in the Сrankshaft Components of V Configuration Engine with Offset Rod Bearing Journals

    Directory of Open Access Journals (Sweden)

    M. Yu. Mikhailov

    2017-01-01

    Full Text Available Currently, a great number of large vehicle engines, especially diesel ones, have a V-shaped configuration layout. For six-cylinder and eight-cylinder V-engines, to simplify a processing technology of the block-crankcases, in the section manufacturers often use the 90° angle, which is the most prevalent angle for the V8 engine. However, in this case, an even firing cycle in the cylinders is not provided for the V6 layout. This leads to significant vibrations, especially at idle and requires for a more massive flywheel.Designers face the challenge to provide the even firing cycle in the cylinders. To solve this problem are often used the crankshaft designs, which have the offset rod journals. However, it leads to the manufacturing complexity of the shaft, and also to the need to use the special methods of calculation.There are no direct calculation methods for the crankshafts of this design. The paper proposes a technique to define the nominal stresses in the crankshaft of this design. To consider the shaft is used a split-type design. The paper presents a schematic diagram of the crankshaft loading, and on its basis describes equations of the moments for each section. A special attention is drawn to the new constructive element, i.e. an intermediate cheek. For clarity, the diagrams of moments in two mutually perpendicular planes are built. It is worth noting that the paper also proposes a technique from transition from the global to the local coordinate system when considering the moments in the crankshaft elements.Further, there are the appropriate expressions to determine the nominal stresses. This is one of the main desired values in calculating the crankshaft endurance. The developed technique in the particular case allows the calculation of crankshaft engine models that can be subsumed under the advantages.In the future the proposed technique is expected to be a basis for creating a software complex. The complex objective is expected to be

  2. Seismic bearing

    Science.gov (United States)

    Power, Dennis

    2009-05-01

    Textron Systems (Textron) has been using geophones for target detection for many years. This sensing capability was utilized for detection and classification purposes only. Recently Textron has been evaluating multiaxis geophones to calculate bearings and track targets more specifically personnel. This capability will not only aid the system in locating personnel in bearing space or cartesian space but also enhance detection and reduce false alarms. Textron has been involved in the testing and evaluation of several sensors at multiple sites. One of the challenges of calculating seismic bearing is an adequate signal to noise ratio. The sensor signal to noise ratio is a function of sensor coupling to the ground, seismic propagation and range to target. The goals of testing at multiple sites are to gain a good understanding of the maximum and minimum ranges for bearing and detection and to exploit that information to tailor sensor system emplacement to achieve desired performance. Test sites include 10A Site Devens, MA, McKenna Airfield Ft. Benning, GA and Yuma Proving Ground Yuma, AZ. Geophone sensors evaluated include a 28 Hz triax spike, a 15 Hz triax spike and a hybrid triax spike consisting of a 10 Hz vertical geophone and two 28 Hz horizontal geophones. The algorithm uses raw seismic data to calculate the bearings. All evaluated sensors have triaxial geophone configuration mounted to a spike housing/fixture. The suite of sensors also compares various types of geophones to evaluate benefits in lower bandwidth. The data products of these tests include raw geophone signals, seismic features, seismic bearings, seismic detection and GPS position truth data. The analyses produce Probability of Detection vs range, bearing accuracy vs range, and seismic feature level vs range. These analysis products are compared across test sites and sensor types.

  3. INVESTIGATION OF TRIBOLOGICAL PROPERTIES CuSn10 BEARING MATERIAL

    Directory of Open Access Journals (Sweden)

    Bekir Sadık ÜNLÜ

    2005-01-01

    Full Text Available Bronzes which copper based alloys is widely used because of properties physical, thermal and tribological as journal bearing material. This material that has tribological performance good conclusions gives at journal bearings. In this study, CuSn10 bronze that were manufactured journal bearings friction and wear properties has been examined and compared. SAE 1050 steel shaft has been used as counter abrader. Experiments have been carried out 10 N and 20 N loads, 750 and 1500 rpm, dry and lubricated conditions by using radial journal bearing wear test rig. As a results, high friction coefficient and weigh loss have been obtained at dry condition more than lubricated condition.

  4. Multielement stoichiometry of submerged macrophytes across Yunnan plateau lakes (China)

    National Research Council Canada - National Science Library

    Xing, Wei; Wu, Haoping; Shi, Qiao; Hao, Beibei; Liu, Han; Wang, Zhixiu; Liu, Guihua

    2015-01-01

    .... We predicted that tissue element composition in submerged macrophytes is affected by lake trophic level and taxonomy, and submerged macrophytes have weak stoichiometric homeostasis for all above 16 elements...

  5. Oxygen dynamics in submerged rice (Oryza sativa L.)

    DEFF Research Database (Denmark)

    Colmer, Timothy D.; Pedersen, Ole

    2008-01-01

    Complete submergence of plants prevents direct O2 and CO2 exchange with air. Underwater photosynthesis can result in marked diurnal changes in O2 supply to submerged plants. Dynamics in pO2 had not been measured directly for submerged rice (Oryza sativa), but in an earlier study, radial O2 loss...

  6. Benthic bacterial diversity in submerged sinkhole ecosystems.

    Science.gov (United States)

    Nold, Stephen C; Pangborn, Joseph B; Zajack, Heidi A; Kendall, Scott T; Rediske, Richard R; Biddanda, Bopaiah A

    2010-01-01

    Physicochemical characterization, automated ribosomal intergenic spacer analysis (ARISA) community profiling, and 16S rRNA gene sequencing approaches were used to study bacterial communities inhabiting submerged Lake Huron sinkholes inundated with hypoxic, sulfate-rich groundwater. Photosynthetic cyanobacterial mats on the sediment surface were dominated by Phormidium autumnale, while deeper, organically rich sediments contained diverse and active bacterial communities.

  7. Production of extracellular aspartic protease in submerged ...

    African Journals Online (AJOL)

    Yomi

    29(1): 1-6. Fraile ER, Bernardinelli SE, Handel M, Jauregui AM (1978). Selección de cepas de Mucor sp productoras de enzimas coagulantes de leche. Rev. Arg. Microbiol. 10(2): 65-69. Ghareib M, Hamdy HS, Khalil AA (2001). Production of intracellular milk clotting enzyme in submerged cultures of Fusarium subglutinans.

  8. Topology optimization for submerged buoyant structures

    NARCIS (Netherlands)

    Picelli, R.; van Dijk, R.; Vicente, W.M.; Pavanello, R.; Langelaar, M.; van Keulen, A.

    2017-01-01

    This paper presents an evolutionary structural topology optimization method for the design of completely submerged buoyant modules with design-dependent fluid pressure loading. This type of structure is used to support offshore rig installation and pipeline transportation at all water depths. The

  9. Production of extracellular aspartic protease in submerged ...

    African Journals Online (AJOL)

    Fungal milk-clotting enzymes have gained value as bovine Chymosin substitutes in the cheese industry. In this work, the effects of culture conditions on the production of extracellular milk clotting enzymes from Mucor mucedo DSM 809 in submerged fermentation were studied. The maximum activity was observed after 48 h ...

  10. Shaft Center Orbit in Dynamically Loaded Bearings

    DEFF Research Database (Denmark)

    Klit, Peder

    2005-01-01

    The aim of this work is to demonstrate how to utilize the bearings damping coe±cients to estimate the orbit for a dynamically loaded journal bearing. The classical method for this analysis was developed by Booker in 1965 [1]and described further in 1972 [2]. Several authors have re¯ned this metho...

  11. Hydrodynamic bearings

    CERN Document Server

    Bonneau, Dominique; Souchet, Dominique

    2014-01-01

    This Series provides the necessary elements to the development and validation of numerical prediction models for hydrodynamic bearings. This book describes the rheological models and the equations of lubrication. It also presents the numerical approaches used to solve the above equations by finite differences, finite volumes and finite elements methods.

  12. Crestal bone loss around submerged and nonsubmerged dental implants: A systematic review.

    Science.gov (United States)

    Al Amri, Mohammad D

    2016-05-01

    To my knowledge, there is no systematic review of crestal bone loss (CBL) around submerged and nonsubmerged dental implants. The purpose of this review was to systematically assess CBL around submerged and nonsubmerged dental implants. The addressed focused question was, "Does crestal and subcrestal placement of dental implants influence crestal bone levels?" Databases were searched from 1986 through October 2015 using different combinations of the following keywords: crestal, sub-crestal, bone loss, dental implant, submerged, and nonsubmerged. Reference lists of potentially relevant original and review articles were hand-searched to identify any further studies. Letters to the editor, case reports, commentaries, studies on platform-switched implants, and studies published in languages other than English were excluded. In total, 13 studies (6 human and 7 animal), which were performed at universities, were included. In the human studies, the number of participants ranged from 8 to 84 individuals. The follow-up period ranged from 1 to 5 years. CBL at the test sites ranged from 0.17 mm to 0.9 mm and at control sites from 0.02 mm to 1.4 mm. Five human studies reported no significant difference in CBL around implants placed at the test and control sites. All animal studies were performed in dogs with a mean age ranging from 1 to approximately 2 years. The follow-up period ranged from 2 to 6 months. Four animal studies reported no significant difference in CBL around submerged and nonsubmerged implants. No significant difference in CBL was found around submerged and nonsubmerged dental implants. Copyright © 2016 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

  13. Pump Coastdown with the Submerged Flywheel

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Hyun-Gi; Seo, KyoungWoo; Kim, Seong Hoon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Many research reactors are generally designed as open pool types in consideration of the heat removal of the nuclear fuels, reactor operation and accessibility. Reactor structure assembly is generally placed at the pool bottom as shown in Fig. 1. Primary cooling system pump circulates the coolant from the reactor structure to the heat exchanger in order to continuously remove the heat generated from the reactor core in the research reactor as shown in Fig. 1. The secondary cooling system releases the transferred heat to the atmosphere by the cooling tower. Coastdown flow rate of the primary cooling system pump with the submerged flywheel are calculated analytically in case of the accident situation. Coastdown flow rate is maintained until almost 80 sec when the pump stops normally. But, coastdown flow rate is rapidly decreased when the flywheel is submerged because of the friction load on the flywheel surface.

  14. Coastline Protection by a Submerged Breakwater

    Science.gov (United States)

    Valentine, B. D.; Hayatdavoodi, M.; Ertekin, R. C.

    2016-02-01

    Coastal communities are in danger of the impact caused by storm surge and waves. Storm surge brings the water level to a higher elevation and farther inland. This rise in water level increases the chance of a higher number and larger set of waves approaching shorelines, and it can potentially devastate the coastal infrastructure. In this study, we evaluate the performance of a submerged, horizontal breakwater located near shore. Unlike other types of breakwaters, such as the ones that extend to the surface, either fixed or floating, a submerged horizontal breakwater does not create any visual distraction or limit most of the recreational and commercial activities in the nearshore areas. The Level I Green-Naghdi (GN) nonlinear water wave equations are utilized here to study the wave transformation over a submerged breakwater that is located in shallow water. The GN theory is based on the theory of directed fluid sheets and assumes an incompressible and inviscid fluid; no assumption on the rotationality of the flow is required. In this approach, the nonlinear boundary conditions and the averaged conservation laws are satisfied exactly. The reflection and transmission coefficients due to nonlinear shallow water waves are determined implementing two approaches which use Goda's (1976) and Grue's (1992) methods. The results are compared with the existing laboratory experiments, and close agreement is observed overall. Preliminary results of the performance of the breakwater on dissipating storm waves during Hurricane Ike (2008), approaching the shore of Galveston, Texas, are presented.

  15. The Accuracy Of Air Bearing Systems

    Science.gov (United States)

    Stout, K. J.

    1987-01-01

    The accuracy of air bearing systems is related in most cases to the static stiffness of the bearing. In practice the stiffness which can be achieved is related to the selection of optimum design parameters. This paper considers journal bearings and discusses the parameters which control bearing performance. Guidance is given to assist the designer in specifying the optimal conditions of each controlling parameter. A graphical design procedure is discussed which enables the designer to interrelate all aspects of design in a simple to use technique whilst still retaining optimal ranges for each parameter involved.

  16. IODINE REMOVAL EFFICIENCY IN NON-SUBMERGED AND SUBMERGED SELF-PRIMING VENTURI SCRUBBER

    OpenAIRE

    Ali, Majid; CHANGQI, YAN; ZHONGNING, SUN; HAIFENG, GU; JUNLONG, WANG; MEHBOOB, KHURRAM

    2013-01-01

    The objective of this conducted research is to study the iodine removal efficiency in a self-priming venturi scrubber for submerged and non-submerged operating conditions experimentally and theoretically. The alkaline solution is used as an absorbent, which is prepared by dissolving sodium hydroxide (NaOH) and sodium thiosulphate (Na2S2O3) in water to remove the gaseous iodine (I2) from the gas. Iodine removal efficiency is examined at various gas flow rates and inlet concentrations of iodine...

  17. Scaling laws for radial foil bearings

    Science.gov (United States)

    Honavara Prasad, Srikanth

    The effects of fluid pressurization, structural deformation of the compliant members and heat generation in foil bearings make the design and analysis of foil bearings very complicated. The complex fluid-structural-thermal interactions in foil bearings also make modeling efforts challenging because these phenomena are governed by highly non-linear partial differential equations. Consequently, comparison of various bearing designs require detailed calculation of the flow fields (velocities, pressures), bump deflections (structural compliance) and heat transfer phenomena (viscous dissipation in the fluid, frictional heating, temperature profile etc.,) resulting in extensive computational effort (time/hardware). To obviate rigorous computations and aid in feasibility assessments of foil bearings of various sizes, NASA developed the "rule of thumb" design guidelines for estimation of journal bearing load capacity. The guidelines are based on extensive experimental data. The goal of the current work is the development of scaling laws for radial foil bearings to establish an analytical "rule of thumb" for bearing clearance and bump stiffness. The use of scale invariant Reynolds equation and experimentally observed NASA "rule of thumb" yield scale factors which can be deduced from first principles. Power-law relationships between: a. Bearing clearance and bearing radius, and b. bump stiffness and bearing radius, are obtained. The clearance and bump stiffness values obtained from scaling laws are used as inputs for Orbit simulation to study various cases. As the clearance of the bearing reaches the dimensions of the material surface roughness, asperity contact breaks the fluid film which results in wear. Similarly, as the rotor diameter increases (requiring larger bearing diameters), the load capacity of the fluid film should increase to prevent dry rubbing. This imposes limits on the size of the rotor diameter and consequently bearing diameter. Therefore, this thesis aims

  18. Submergence tolerance in Hordeum marinum

    DEFF Research Database (Denmark)

    Pedersen, Ole; Malik, Al I.; Colmer, Timothy D.

    2010-01-01

    Floodwaters differ markedly in dissolved CO(2), yet the effects of CO(2) on submergence responses of terrestrial plants have rarely been examined. The influence of dissolved CO(2) on underwater photosynthesis and growth was evaluated for three accessions of the wetland plant Hordeum marinum Huds......) movement, would all contribute to submergence tolerance in H. marinum. The present study demonstrates that dissolved CO(2) levels can determine submergence tolerance of terrestrial plants. So, submergence experiments should be conducted with defined CO(2) concentrations and enrichment might be needed...

  19. Calibration of submerged multi-sluice gates

    Directory of Open Access Journals (Sweden)

    Mohamed F. Sauida

    2014-09-01

    The main objective of this work is to study experimentally and verify empirically the different parameters affecting the discharge through submerged multiple sluice gates (i.e., the expansion ratios, gates operational management, etc.. Using multiple regression analysis of the experimental results, a general equation for discharge coefficient is developed. The results show, that the increase in the expansion ratio and the asymmetric operation of gates, give higher values for the discharge coefficient. The obtained predictions of the discharge coefficient using the developed equations are compared to the experimental data. The present developed equations showed good consistency and high accuracy.

  20. Bear at the back door | Prinsloo | Scientia Militaria: South African ...

    African Journals Online (AJOL)

    Scientia Militaria: South African Journal of Military Studies. Journal Home · ABOUT · Advanced Search · Current Issue · Archives · Journal Home > Vol 9, No 3 (1979) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. Bear at the back door. C Prinsloo. Abstract.

  1. Submergence rice cultivation in southern Bangladesh: farmers opinion and adaptations practices

    Directory of Open Access Journals (Sweden)

    AKM Abdul Ahad Biswas

    2015-12-01

    Full Text Available Rice productivity in coastal Bangladesh is lower than the national average and total coastal area is considered to be submergence-prone and higher vulnerable in July to January cropping season. The selected study areas are Kalapara and Patuakhali Sadar Upazila that are too vulnerable to agriculture practices. Field survey was conducted during 01st June to 30th July, 2015 to investigate the impact of submergence on Aman rice cultivation (ARC, existing adopted local adaptation practices with impacts and options to address the submergence problem. Primary data was collected through Focus Group Discussion (FGD, Individual Interview and Key Informant Interview methods and secondary data was collected from different secondary sources. A well-structured pretested questionnaire schedule was developed keeping in mind the objectives and variables under this study. After cyclone SIDR and AILA devastation, the rate of traditional ARC is decreasing every year and in 2015 it was 26.51%. Recently farmers have adopted new cropping practices and strategies like modern ARC in Aman season as single crop; Boro-Aus-Aman season as triple crop and Aus-Aman season as double crop are practicing. Approximately all farmers have adopted to grow stress tolerant rice varieties (STRV; farmer’s curiosities to familiar with and to have the STRV are encouraging. Farmers were fully adopted BRRIdhan52 rice cultivation with positive perceptions of higher yield and lower production cost. Therefore it can be concluded that the intensity of adoption of adaptation and mitigation measures are significantly influenced positively by the STRV yield capability; farmer’s participation in intervention programs; livelihood diversification; frequency of extension personnel contact; submergence and inundation characteristics; tolerance attributes of STRV and availability of STRV cultivation information.International Journal of Environment Vol.4(4 2015: 100-113

  2. Damage detection in submerged plates using ultrasonic guided waves

    Indian Academy of Sciences (India)

    Suitable ultrasonic guided wave modes with optimum scanning capabilities have been generated and identified in submerged plate system. Finally, the propagation of selected modes through submerged notched plates is investigated. Sensitivity of leaky waves to the notches has been studied. The methodology would help ...

  3. Automating a submerged pump method for operating oil wells

    Energy Technology Data Exchange (ETDEWEB)

    Popa, I.

    1984-01-01

    The basic parameters of wells which operate in a mode of submerged operation are presented. The basic systems for measuring and testing the parameters of submerged operation are described. Worldwide experience in solving this particular problem is analyzed. Romanian (SRR) use of systems for automation, remote signaling and remote management is examined.

  4. Impacts of climate change on submerged and emergent wetland plants

    Science.gov (United States)

    Frederick T. Short; Sarian Kosten; Pamela A. Morgan; Sparkle L Malone; Gregg E. Moore

    2016-01-01

    Submerged and emergent wetland plant communities are evaluated for their response to global climate change (GCC), focusing on seagrasses, submerged freshwater plants, tidal marsh plants, freshwater marsh plants and mangroves. Similarities and differences are assessed in plant community responses to temperature increase, CO2increase, greater UV-B exposure, sea...

  5. Identification of a novel submergence response gene regulated by ...

    African Journals Online (AJOL)

    Tuoyo Aghomotsegin

    2016-12-07

    Dec 7, 2016 ... 3Engineering Research Center of Ecology and Agricultural Use of Wetland, Ministry of Education, Yangzte University,. Jingzhou 434025, P.R. .... intolerance to submergence) and M202(Sub1A) by qRT-. PCR. We identified a novel gene responsive to submergence, called RS1. The expression patterns of.

  6. Identification of a novel submergence response gene regulated by ...

    African Journals Online (AJOL)

    Our results also show that RS1 is highly expressed under submergence, drought, and NaCl stresses, but not under cold or dehydration stress. Hormone ABA treatment induces, whereas GA treatment decreases, RS1 expression. The RS1 and Sub1A genes are co-regulated under submergence. Overexpression of RS1 in ...

  7. Journal of Biosciences | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Biosciences. SELVAM REKHA. Articles written in Journal of Biosciences. Volume 42 Issue 1 March 2017 pp 15-21 Article. Neurospora tetrasperma crosses heterozygous for hybrid translocation strains produce rare eight-spored asci-bearing heterokaryotic ascospores · DURGADAS P ...

  8. Laser-matter Interaction with Submerged Samples

    Energy Technology Data Exchange (ETDEWEB)

    Mariella, R; Rubenchik, A; Norton, M; Donohue, G; Roberts, K

    2010-03-25

    With the long-term goal in mind of investigating if one could possibly design a 'universal solid-sample comminution technique' for debris and rubble, we have studied pulsed-laser ablation of solid samples that were contained within a surrounding fluid. Using pulses with fluences between 2 J and 0.3 J, wavelengths of 351 and 527 nm, and samples of rock, concrete, and red brick, each submerged in water, we have observed conditions in which {micro}m-scale particles can be preferentially generated in a controlled manner, during the laser ablation process. Others have studied laser peening of metals, where their attention has been to the substrate. Our study uses non-metallic substrates and analyzes the particles that are ablated from the process. The immediate impact of our investigation is that laser-comminution portion of a new systems concept for chemical analysis has been verified as feasible.

  9. Submerged arc welding of heavy plate

    Science.gov (United States)

    Wilson, R. A.

    1972-01-01

    The submerged arc process is particularly suitable for heavy plate welding because of its ability to combine very high deposit rates along with excellent quality. It does these things without the smoke and spatter often accompanying other processes. It is available today in several forms that are pointed to the fabricators of heavy sections with long, short or round about welds. Tandem arc full automatic equipment is particularly suitable for those long heavy welds where speed and deposit rate are of the first order. An attachment called long stick-out which makes use of the IR drop on long electrode extensions can be included on this equipment to increase deposition rates 50% or more.

  10. Modeling tabular icebergs submerged in the ocean

    Science.gov (United States)

    Stern, A. A.; Adcroft, A.; Sergienko, O.; Marques, G.

    2017-08-01

    Large tabular icebergs calved from Antarctic ice shelves have long lifetimes (due to their large size), during which they drift across large distances, altering ambient ocean circulation, bottom-water formation, sea-ice formation, and biological primary productivity in the icebergs' vicinity. However, despite their importance, the current generation of ocean circulation models usually do not represent large tabular icebergs. In this study, we develop a novel framework to model large tabular icebergs submerged in the ocean. In this framework, tabular icebergs are represented by pressure-exerting Lagrangian elements that drift in the ocean. The elements are held together and interact with each other via bonds. A breaking of these bonds allows the model to emulate calving events (i.e., detachment of a tabular iceberg from an ice shelf) and tabular icebergs breaking up into smaller pieces. Idealized simulations of a calving tabular iceberg, its drift, and its breakup demonstrate capabilities of the developed framework.

  11. Crassulacean acid metabolism in submerged aquatic plants

    Science.gov (United States)

    Keeley, Jon E.; Sybesme, C.

    1984-01-01

    CO2-fixation in the dark is known to occur in various organs of many plants. However, only in species possessing crassulacean acid metabolism (CAM) does dark CO2-fixation contribute substantially to the carbon economy of the plant. Until very recently CAM was known only from terrestrial species, largely drought adapted succulents. The discovery of CAM in the submerged aquatic fern ally Isoetes howellii (Isoetaceae)(Keeley 1981) adds a new dimension to our understanding of crassulacean acid metabolism. In this paper I will summarize 1) the evidence of CAM in Isoetes howellii, 2) the data on the distribution of CAM in aquatic species, and 3) the work to date on the functional significance of CAM in aquatic species.

  12. Workshop on ROVs and deep submergence

    Science.gov (United States)

    The deep-submergence community has an opportunity on March 6 to participate in a unique teleconferencing demonstration of a state-of-the-art, remotely operated underwater research vehicle known as the Jason-Medea System. Jason-Medea has been developed over the past decade by scientists, engineers, and technicians at the Deep Submergence Laboratory at Woods Hole Oceanographic Institution. The U.S. Navy, the Office of the Chief of Naval Research, and the National Science Foundation are sponsoring the workshop to explore the roles that modern computational, communications, and robotics technologies can play in deep-sea oceanographic research.Through the cooperation of Electronic Data Systems, Inc., the Jason Foundation, and Turner Broadcasting System, Inc., 2-1/2 hours of air time will be available from 3:00 to 5:30 PM EST on March 6. Twenty-seven satellite downlink sites will link one operating research vessel and the land-based operation with workshop participants in the United States, Canada, the United Kingdom, and Bermuda. The research ship Laney Chouest will be in the midst of a 3-week educational/research program in the Sea of Cortez, between Baja California and mainland Mexico. This effort is focused on active hydrothermal vents driven by heat flow from the volcanically active East Pacific Rise, which underlies the sediment-covered Guaymas Basin. The project combines into a single-operation, newly-developed robotic systems, state-of-the-art mapping and sampling tools, fiber-optic data transmission from the seafloor, instantaneous satellite communication from ship to shore, and a sophisticated array of computational and telecommunications networks. During the workshop, land-based scientists will observe and participate directly with their seagoing colleagues as they conduct seafloor research.

  13. Submerged membrane distillation for seawater desalination

    KAUST Repository

    Francis, Lijo

    2014-08-11

    A submerged membrane distillation (SMD) process for fresh water production from Red Sea water using commercially available hollow fiber membranes has been successfully employed and compared with the conventional direct contact membrane distillation (DCMD) process. The hollow fiber membranes have been characterized for its morphology using field effect scanning electron microscope. In SMD process, a bunch of hollow fiber membranes are glued together at both ends to get a simplified open membrane module assembly submerged into the coolant tank equipped with a mechanical stirrer. Hot feed stream is allowed to pass through the lumen side of the membrane using a feed pump. Continuous stirring at the coolant side will reduce the temperature and concentration polarization. During the conventional DCMD process, using feed-coolant streams with co-current and counter-current flows has been tested and the results are compared in this study. In SMD process, a water vapor flux of 10.2 kg m-2 h-1 is achieved when using a feed inlet temperature of 80°C and coolant temperature of 20°C. Under the same conditions, during conventional DCMD process, a water vapor flux of 11.6 and 10.1 kg m-2 h-1 were observed during counter-current and co-current flow streams, respectively. Results show that the water production in the SMD process is comparable with the conventional DCMD process, while the feed-coolant flow streams are in the co-current direction. During conventional DCMD operation, a 15% increase in the water production is observed when feed-coolant streams are in the counter-current direction compared to the co-current direction. © 2014 © 2014 Balaban Desalination Publications. All rights reserved.

  14. Nigerian Journal of Parasitology: Journal Sponsorship

    African Journals Online (AJOL)

    Nigerian Journal of Parasitology: Journal Sponsorship. Journal Home > About the Journal > Nigerian Journal of Parasitology: Journal Sponsorship. Log in or Register to get access to full text downloads.

  15. Highland Medical Research Journal: Journal Sponsorship

    African Journals Online (AJOL)

    Highland Medical Research Journal: Journal Sponsorship. Journal Home > About the Journal > Highland Medical Research Journal: Journal Sponsorship. Log in or Register to get access to full text downloads.

  16. Durability performance of submerged concrete structures - phase 2.

    Science.gov (United States)

    2015-09-01

    This project determined that severe corrosion of steel can occur in the submerged : portions of reinforced concrete structures in marine environments. Field studies of decommissioned : pilings from Florida bridges revealed multiple instances of stron...

  17. Submerged Aquatic Vegetation of Bogue Sound, North Carolina 1992 Geodatabase

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — During 1992, 1:20,000 scale aerial photography for Bogue Sound, North Carolina was collected as part of an effort to map submerged aquatic vegetation (SAV) in...

  18. Submerged Aquatic Vegetation of Bogue Sound, North Carolina 1992 Substrate

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — During 1992, 1:20,000 scale aerial photography for Bogue Sound, North Carolina was collected as part of an effort to map submerged aquatic vegetation (SAV) in...

  19. Marine algal flora of submerged Angria Bank (Arabian Sea)

    Digital Repository Service at National Institute of Oceanography (India)

    Untawale, A.G.; Reddy, C.R.K.; Ambiye, V.

    Submerged Angria Bank was surveyed for the deep water marine algal flora. About 57 species were reported from this bank for the first time. Rhodophyta dominated (30 species) followed by Chlorophyta (18 species) and Phaeophyta (9 species). A few...

  20. Submerged Aquatic Vegetation of Bogue Sound, North Carolina 1992 Biotic

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — During 1992, 1:20,000 scale aerial photography for Bogue Sound, North Carolina was collected as part of an effort to map submerged aquatic vegetation (SAV) in...

  1. Submerged Aquatic Vegetation of Bogue Sound, North Carolina 1992 Geoform

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — During 1992, 1:20,000 scale aerial photography for Bogue Sound, North Carolina was collected as part of an effort to map submerged aquatic vegetation (SAV) in...

  2. Supporting Calculations For Submerged Bed Scrubber Condensate Disposal Preconceptual Study

    Energy Technology Data Exchange (ETDEWEB)

    Pajunen, A. J.; Tedeschi, A. R.

    2012-09-18

    This document provides supporting calculations for the preparation of the Submerged Bed Scrubber Condensate Disposal Preconceptual Study report The supporting calculations include equipment sizing, Hazard Category determination, and LAW Melter Decontamination Factor Adjustments.

  3. Towards accurate prediction of unbalance response, oil whirl and oil whip of flexible rotors supported by hydrodynamic bearings

    NARCIS (Netherlands)

    Eling, R.P.T.; te Wierik, M.; van Ostayen, R.A.J.; Rixen, D.J.

    2016-01-01

    Journal bearings are used to support rotors in a wide range of applications. In order to ensure reliable operation, accurate analyses of these rotor-bearing systems are crucial. Coupled analysis of the rotor and the journal bearing is essential in the case that the rotor is flexible. The accuracy of

  4. On Controllable Elastohydrodynamic Fluid Film Bearings

    DEFF Research Database (Denmark)

    Haugaard, Martin Asger

    This thesis gives a theoretical description of the active tilting-pad journal bearing (ATPJB). It provides the qualified reader with the tools to model an ATPJB, while staying clear of pitfalls. The model is based on well known techniques and allows for local stability analyses, harmonic stationa...

  5. Estimates of Water Ingestion for Women in Pregnant, Lactating and Non-Pregnant and Non-Lactating Child Bearing Age Groups Based on USDA's 1994-96, 1998 Continuing Survey of Food Intake by Individuals (Journal Article)

    Science.gov (United States)

    Women in the child bearing age of 15 to 44 years and, in particular, pregnant and lactating women in this age cohort are considered a sensitive subpopulation when assessing risk from ingestion of contaminated water because ingested contaminants may pose a risk not only to the mot...

  6. Impeded Carbohydrate Metabolism in Rice Plants under Submergence Stress

    Directory of Open Access Journals (Sweden)

    Malay Kumar ADAK

    2011-06-01

    Full Text Available The detrimental effects of submergence on physiological performances of some rice varieties with special references to carbohydrate metabolisms and their allied enzymes during post-flowering stages have been documented and clarified in the present investigation. It was found that photosynthetic rate and concomitant translocation of sugars into the panicles were both related to the yield. The detrimental effects of the complete submergence were recorded in generation of sucrose, starch, sucrose phosphate synthase and phosphorylase activity in the developing panicles of the plants as compared to those under normal or control (i.e. non-submerged condition. The accumulation of starch was significantly lower in plants under submergence and that was correlated with ADP-glucose pyrophosphorylase activity. Photosynthetic rate was most affected under submergence in varying days of post-flowering and was also related to the down regulation of Ribulose bisphosphate carboxylase activity. However, under normal or control condition, there recorded a steady maintenance of photosynthetic rate at the post-flowering stages and significantly higher values of Ribulose bisphosphate carboxylase activity. Still, photosynthetic rate of the plants under both control and submerged conditions had hardly any significant correlation with sugar accumulation and other enzymes of carbohydrate metabolism like invertase with grain yield. Finally, plants under submergence suffered significant loss of yield by poor grain filling which was related to impeded carbohydrate metabolism in the tissues. It is evident that loss of yield under submergence is attributed both by lower sink size or sink capacity (number of panicles, in this case as well as subdued carbohydrate metabolism in plants and its subsequent partitioning into the grains.

  7. Incipient motion of sediment in presence of submerged flexible vegetation

    OpenAIRE

    Wang, Hao; Tang, Hong-Wu; Zhao, Han-Qing; Xuan-yu ZHAO; Lü, Sheng-qi

    2015-01-01

    The presence of submerged vegetation on river beds can change the water flow structure and alter the state of sediment motion. In this study, the incipient motion of sediment in the presence of submerged flexible vegetation in open channels was investigated in a laboratory experiment. The vegetation was simulated with flexible rubber cylinders arranged in parallel arrays. The effect of the vegetation density, water depth, and sediment grain size on the incipient motion was investigated. The e...

  8. Heat transfer model for quenching by submerging

    Energy Technology Data Exchange (ETDEWEB)

    Passarella, D N; Varas, F [Departamento de Matematica Aplicada II, E.T.S. de Ing. de Telecomunicacion, Universidad de Vigo, Campus Marcosende, 36310 Vigo (Spain); MartIn, E B, E-mail: diego@dma.uvigo.es, E-mail: fvaras@uvigo.es, E-mail: emortega@uvigo.es [Area de Mecanica de Fluidos, E.T.S. de Ing. Industriales, Universidad de Vigo, Campus Marcosende, 36310 Vigo (Spain)

    2011-05-01

    In quenching by submerging the workpiece is cooled due to vaporization, convective flow and interaction of both mechanisms. The dynamics of these phenomena is very complex and the corresponding heat fluxes are strongly dependent on local flow variables such as velocity of fluid and vapor fraction. This local dependence may produce very different cooling rates along the piece, responsible for inappropriate metallurgical transformations, variability of material properties and residual stresses. In order to obtain an accurate description of cooling during quenching, a mathematical model of heat transfer is presented here. The model is based on the drift-flux mixture-model for multiphase flows, including an equation of conservation of energy for the liquid phase and specific boundary conditions that account for evaporation and presence of vapor phase on the surface of the piece. The model was implemented on Comsol Multiphysics software. Generation of appropriate initial and boundary conditions, as well as numerical resolution details, is briefly discussed. To test the model, a simple flow condition was analyzed. The effect of vapor fraction on heat transfer is assessed. The presence of the typical vapor blanket and its collapse can be recovered by the model, and its effect on the cooling rates on different parts of the piece is analyzed. Comparisons between numerical results and data from literature are made.

  9. The journal of irreproducible results II

    CERN Document Server

    Scherr, George H

    1997-01-01

    Compilation of offbeat science papers from the Journal of Irreproducible Results, including: Emotion in the Rat Face; Foamy Beer; Cooking with Potential Energy; The Large-Cake Cutting Problem; Siamese Twinning in Gummy Bears; much more.

  10. Submerged cultivation of medicinal mushrooms: bioprocesses and products (review).

    Science.gov (United States)

    Elisashvili, Vladimir

    2012-01-01

    Medicinal mushrooms belonging to higher Basidiomycetes are an immensely rich yet largely untapped resource of useful, easily accessible, natural compounds with various biological activities that may promote human well-being. The medicinal properties are found in various cellular components and secondary metabolites (polysaccharides, proteins and their complexes, phenolic compounds, polyketides, triterpenoids, steroids, alkaloids, nucleotides, etc.), which have been isolated and identified from the fruiting bodies, culture mycelium, and culture broth of mushrooms. Some of these compounds have cholesterol-lowering, anti-diabetic, antioxidant, antitumor, immunomodulating, antimicrobial, and antiviral activities ready for industrial trials and further commercialization, while others are in various stages of development. Recently, the submerged cultivation of medicinal mushrooms has received a great deal of attention as a promising and reproducible alternative for the efficient production of mushroom mycelium and metabolites. Submerged cultivation of mushrooms has significant industrial potential, but its success on a commercial scale depends on increasing product yields and development of novel production systems that address the problems associated with this technique of mushroom cultivation. In spite of many researchers' efforts for the production of bioactive metabolites by mushrooms, the physiological and engineering aspects of submerged cultures are still far from being thoroughly studied. The vast majority of studies have focused on polysaccharide and ganoderic acid production in submerged cultivation of medicinal mushrooms, and very little has been written so far on the antioxidant and hemagglutinating activity of submerged mushroom cultures. The purpose of this review is to provide an update of the present state of the art and future prospects of submerged cultivation of medicinal mushrooms to produce mycelium and bioactive metabolites, and to make a

  11. Teddy Bear Stories

    DEFF Research Database (Denmark)

    van Leeuwen, Theo; Caldas-Coulthardt, Carmen

    2014-01-01

    This paper presents a semiotic analysis of a key cultural artefact, the teddy bear. After introducing the iconography of the teddy bear, it analyses different kinds of stories to show how teddy bears are endowed with meaning in everyday life: stories from children's books, reminiscenses by adults...... about their childhood teddy bears, and children's accounts of what they do with teddy bears, both written for school and told 'out of school', The chapter sees teddy bears as artefacts that provide a cultural channeling for the child's need of a transitional object and argues that the meanings of teddy...... bears have traditionally centred on interpersonal relations within the nuclear family, but have recently been institutionalized and commercialized....

  12. WEST AFRICAN JOURNAL OF MEDICINE

    African Journals Online (AJOL)

    standards of care. OBJECTIVES: The study aimed at finding out clients' perceptions of the quality of health care delivery at the tertiary care level in. Ghana, using ...... 9. Wagner D, Bear M. Patient satisfaction with nursing care: a concept analysis within a nursing framework. Journal of. Advanced Nursing. 2009; 65: 692–701.

  13. The preliminary design of bearings for the control system of a high-temperature lithium-cooled nuclear reactor

    Science.gov (United States)

    Yacobucci, H. G.; Waldron, W. D.; Walowit, J. A.

    1973-01-01

    The design of bearings for the control system of a fast reactor concept is presented. The bearings are required to operate at temperatures up to 2200 F in one of two fluids, lithium or argon. Basic bearing types are the same regardless of the fluid. Crowned cylindrical journals were selected for radially loaded bearings and modified spherical bearings were selected for bearings under combined thrust and radial loads. Graphite and aluminum oxide are the materials selected for the argon atmosphere bearings while cermet compositions (carbides or nitrides bonded with refractory metals) were selected for the lithium lubricated bearings. Mounting of components is by shrink fit or by axial clamping utilizing differential thermal expansion.

  14. Rice SUB1A constrains remodelling of the transcriptome and metabolome during submergence to facilitate post-submergence recovery.

    Science.gov (United States)

    Locke, Anna M; Barding, Gregory A; Sathnur, Sumukh; Larive, Cynthia K; Bailey-Serres, Julia

    2017-11-02

    The rice (Oryza sativa L.) ethylene-responsive transcription factor gene SUB1A-1 confers tolerance to prolonged, complete submergence by limiting underwater elongation growth. Upon desubmergence, SUB1A-1 genotypes rapidly recover photosynthetic function and recommence development towards flowering. The underpinnings of the transition from stress amelioration to the return to homeostasis are not well known. Here, transcriptomic and metabolomic analyses were conducted to identify mechanisms by which SUB1A improves physiological function over the 24 hr following a sublethal submergence event. Evaluation of near-isogenic genotypes after submergence and over a day of reaeration demonstrated that SUB1A transiently constrains the remodelling of cellular activities associated with growth. SUB1A influenced the abundance of ca. 1,400 transcripts and had a continued impact on metabolite content, particularly free amino acids, glucose, and sucrose, throughout the recovery period. SUB1A promoted recovery of metabolic homeostasis but had limited influence on mRNAs associated with growth processes and photosynthesis. The involvement of low energy sensing during submergence and recovery was supported by dynamics in trehalose-6-phosphate and mRNAs encoding key enzymes and signalling proteins, which were modulated by SUB1A. This study provides new evidence of convergent signalling pathways critical to the rapidly reversible management of carbon and nitrogen metabolism in submergence resilient rice. © 2017 John Wiley & Sons Ltd.

  15. Peculiarities of thermal dissociation of oxides during submerged arc welding

    Directory of Open Access Journals (Sweden)

    Leonid Zhdanov

    2013-12-01

    Full Text Available A method of settlement of the process of thermal dissociation of oxides in reaction zone during the submerged arc welding and welding deposition is presented. Combined non-linear equations for definition of gas-vapour mixture composition were developed. They describe the dissociation of MeO, MeO2 and Me2O3 types of oxides. Calculations of the processes of oxide dissociation were performed for the oxides that are commonly included into welding fluxes. Their results and analysis are presented. The method proposed appeared to be adequate and applicable for analysis of processes during submerged arc operation that run in the gas phase.

  16. EAARL-B Submerged Topography—Saint Croix, U.S. Virgin Islands, 2014

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — A submerged topography digital elevation model (DEM) mosaic for a portion of the submerged environs of Saint Croix, U.S. Virgin Islands, was produced from remotely...

  17. EAARL-B Submerged Topography--Saint Thomas, U.S. Virgin Islands, 2014

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — A submerged topography Digital Elevation Model (DEM) mosaic for a portion of the submerged environs of Saint Thomas, U.S. Virgin Islands, was produced from remotely...

  18. Long-term allelopathic control of phytoplankton by the submerged macrophyte Elodea nuttallii

    NARCIS (Netherlands)

    Vanderstukken, M.; Declerck, S.A.J.; Decaestecker, E.; Muylaert, K.

    2014-01-01

    Keywords: allelochemicals; chemical ecology; competition; nutrient limitation; shallow lakes Summary 1.It is well known that submerged macrophytes can suppress phytoplankton blooms in lakes and thus promote water quality and biodiversity. One of the possible mechanisms through which submerged

  19. Invasive Crayfish Threaten the Development of Submerged Macrophytes in Lake Restoration

    NARCIS (Netherlands)

    Wal, van der J.E.M.; Dorenbosch, M.; Immers, A.K.; Vidal Forteza, C.; Geurts Van Kessel, J.M.M.; Peeters, E.T.H.M.; Koese, B.; Bakker, E.S.

    2013-01-01

    Submerged macrophytes enhance water transparency and aquatic biodiversity in shallow water ecosystems. Therefore, the return of submerged macrophytes is the target of many lake restoration projects. However, at present, north-western European aquatic ecosystems are increasingly invaded by omnivorous

  20. Invasive crayfish threaten the development of submerged macrophytes in lake restoration

    NARCIS (Netherlands)

    Van der Wal, J.E.M.; Dorenbosch, M.; Immers, A.; Vidal Forteza, C.; Geurts, J.J.M.; Peeters, E.T.H.M.; Koese, B.; Bakker, E.S.

    2013-01-01

    Submerged macrophytes enhance water transparency and aquatic biodiversity in shallow water ecosystems. Therefore, the return of submerged macrophytes is the target of many lake restoration projects. However, at present, north-western European aquatic ecosystems are increasingly invaded by omnivorous

  1. Improvement of Dynamic Performance of Hybrid Gas Bearings via Adjustable Lubrication

    DEFF Research Database (Denmark)

    Pierart Vásquez, Fabián Gonzalo; Santos, Ilmar

    2013-01-01

    In modern turbo-machinery gas journal bearings have been increasingly adopted, because they can operate at higher speed than most bearing designs. The main disadvantage of gas bearings is their low dynamic stability range. One solution to improve this and their performance is to combine the aerod......In modern turbo-machinery gas journal bearings have been increasingly adopted, because they can operate at higher speed than most bearing designs. The main disadvantage of gas bearings is their low dynamic stability range. One solution to improve this and their performance is to combine...... and the pressure and velocity fields in the injection nozzle are compared. The simplified theoretical model has been validated against the CFD results and experimentally using a test rig. The test rig consists of a flexible rotor supported by a ball bearing and a controllable hybrid gas bearing. The results show...

  2. Through-flow of water in leaves of a submerged plant is influenced by the apical opening

    DEFF Research Database (Denmark)

    Pedersen, Ole; Jørgensen, Lise Bolt; Sand-Jensen, Kaj

    1997-01-01

    Submerged plant, apical opening, hydathode, Sparganium, hydraulic architecture, leaf specific conductivity......Submerged plant, apical opening, hydathode, Sparganium, hydraulic architecture, leaf specific conductivity...

  3. Bearing Health Monitoring

    Directory of Open Access Journals (Sweden)

    S. Shah

    2016-09-01

    Full Text Available Health monitoring of bearings is a widely researched topic and has been attempted by analysing acoustic, thermal and vibration signatures. The methods usually require signal of a healthy bearing to be used as a baseline. This limits their use in practical scenarios. This work proposes a kurtosis based baseline free method of analysing vibration signals to identify the bearing which has generated a fault. It then reports a detailed study on empirical mode decomposition technique for extracting intrinsic mode functions and suggests a set of steps which are necessary and sufficient for the purpose of bearing health monitoring. Thereafter, it compares a few dominant frequencies with the expected ones based on known bearing dimensions. This process has been shown to be fairly accurate in identifying the location of fault in a bearing.

  4. Bearings: Technology and needs

    Science.gov (United States)

    Anderson, W. J.

    1982-01-01

    A brief status report on bearing technology and present and near-term future problems that warrant research support is presented. For rolling element bearings a material with improved fracture toughness, life data in the low Lambda region, a comprehensive failure theory verified by life data and incorporated into dynamic analyses, and an improved corrosion resistant alloy are perceived as important needs. For hydrodynamic bearings better definition of cavitation boundaries and pressure distributions for squeeze film dampers, and geometry optimization for minimum power loss in turbulent film bearings are needed. For gas film bearings, foil bearing geometries that form more nearly optimum film shapes for maximum load capacity, and more effective surface protective coatings for high temperature operation are needed.

  5. Polar bears, Ursus maritimus

    Science.gov (United States)

    Rode, Karyn D.; Stirling, Ian

    2017-01-01

    Polar bears are the largest of the eight species of bears found worldwide and are covered in a pigment-free fur giving them the appearance of being white. They are the most carnivorous of bear species consuming a high-fat diet, primarily of ice-associated seals and other marine mammals. They range throughout the circumpolar Arctic to the southernmost extent of seasonal pack ice.

  6. Hydrogen mitigation in submerged arc welding

    Science.gov (United States)

    Klimowicz, Steven

    With the role of hydrogen in weld metal well understood in its relation to cold cracking, there has been a push to produce welds with lower and lower diffusible hydrogen contents. The push for lower diffusible hydrogen contents has placed pressure on consumables manufactures to create consumables that can achieve the requirements for lower diffusible hydrogen content. Currently EM12K flux is produced so that it can achieve below 4 ml of diffusible hydrogen for every 100g of weld metal deposited (ml/100g) for submerged arc welding (SAW). The recent trend for industry is to preferentially achieve diffusible hydrogen contents below 3 ml/100g. Making it necessary to find a way to modify the flux to achieve a lower diffusible hydrogen content for the welds it produces. To achieve this goal a two phase plan was developed. The first phase was to characterize the entire welding system for hydrogen. Since the goal of the project is hydrogen mitigation, any amount of hydrogen that could be reduced is helpful and therefore must first be discovered. Sources of hydrogen may be found by analyzing the welding wire and base metal, as well as breaking the flux down into its components and production steps. The wire was analyzed for total hydrogen content as was the base metal. The flux and its components were analyzed using differential thermal analysis-simultaneous thermal analysis (DTA-STA) and later vacuum degassing for moisture content. The analysis of the wire showed that the copper coating on the wire was the largest contributor of hydrogen. There was lubricant present on the wire surface as well, but it did not contribute as much as the copper coating. It was found that a simple low temperature baking of the wire was enough to remove the lubricant and coating moisture. The base metal was found to have a similar total hydrogen content to that of the wire. The breakdown of the flux and production process for moisture content analysis revealed that the production process

  7. West African Journal of Radiology: Journal Sponsorship

    African Journals Online (AJOL)

    West African Journal of Radiology: Journal Sponsorship. Journal Home > About the Journal > West African Journal of Radiology: Journal Sponsorship. Log in or Register to get access to full text downloads.

  8. Egyptian Journal of Medical Laboratory Sciences: Journal ...

    African Journals Online (AJOL)

    Egyptian Journal of Medical Laboratory Sciences: Journal Sponsorship. Journal Home > About the Journal > Egyptian Journal of Medical Laboratory Sciences: Journal Sponsorship. Log in or Register to get access to full text downloads.

  9. Journal of Medical Laboratory Science: Journal Sponsorship

    African Journals Online (AJOL)

    Journal of Medical Laboratory Science: Journal Sponsorship. Journal Home > About the Journal > Journal of Medical Laboratory Science: Journal Sponsorship. Log in or Register to get access to full text downloads.

  10. Global Journal of Environmental Sciences: Journal Sponsorship

    African Journals Online (AJOL)

    Global Journal of Environmental Sciences: Journal Sponsorship. Journal Home > About the Journal > Global Journal of Environmental Sciences: Journal Sponsorship. Log in or Register to get access to full text downloads.

  11. Journal of Civil Engineering, JKUAT: Journal Sponsorship

    African Journals Online (AJOL)

    Journal of Civil Engineering, JKUAT: Journal Sponsorship. Journal Home > About the Journal > Journal of Civil Engineering, JKUAT: Journal Sponsorship. Log in or Register to get access to full text downloads.

  12. Global Journal of Mathematical Sciences: Journal Sponsorship

    African Journals Online (AJOL)

    Global Journal of Mathematical Sciences: Journal Sponsorship. Journal Home > About the Journal > Global Journal of Mathematical Sciences: Journal Sponsorship. Log in or Register to get access to full text downloads.

  13. International Journal of Modern Anthropology: Journal Sponsorship

    African Journals Online (AJOL)

    International Journal of Modern Anthropology: Journal Sponsorship. Journal Home > About the Journal > International Journal of Modern Anthropology: Journal Sponsorship. Log in or Register to get access to full text downloads.

  14. ATBU Journal of Environmental Technology: Journal Sponsorship

    African Journals Online (AJOL)

    ATBU Journal of Environmental Technology: Journal Sponsorship. Journal Home > About the Journal > ATBU Journal of Environmental Technology: Journal Sponsorship. Log in or Register to get access to full text downloads.

  15. African Journal of Endocrinology and Metabolism: Journal ...

    African Journals Online (AJOL)

    African Journal of Endocrinology and Metabolism: Journal Sponsorship. Journal Home > About the Journal > African Journal of Endocrinology and Metabolism: Journal Sponsorship. Log in or Register to get access to full text downloads.

  16. New Egyptian Journal of Microbiology: Journal Sponsorship

    African Journals Online (AJOL)

    New Egyptian Journal of Microbiology: Journal Sponsorship. Journal Home > About the Journal > New Egyptian Journal of Microbiology: Journal Sponsorship. Log in or Register to get access to full text downloads.

  17. Nigerian Journal of Plastic Surgery: Journal Sponsorship

    African Journals Online (AJOL)

    Nigerian Journal of Plastic Surgery: Journal Sponsorship. Journal Home > About the Journal > Nigerian Journal of Plastic Surgery: Journal Sponsorship. Log in or Register to get access to full text downloads.

  18. Nigerian Journal of Clinical Medicine: Journal Sponsorship

    African Journals Online (AJOL)

    Nigerian Journal of Clinical Medicine: Journal Sponsorship. Journal Home > About the Journal > Nigerian Journal of Clinical Medicine: Journal Sponsorship. Log in or Register to get access to full text downloads.

  19. Sudan Journal of Medical Sciences: Journal Sponsorship

    African Journals Online (AJOL)

    Sudan Journal of Medical Sciences: Journal Sponsorship. Journal Home > About the Journal > Sudan Journal of Medical Sciences: Journal Sponsorship. Log in or Register to get access to full text downloads.

  20. African Journal of Economic Policy: Journal Sponsorship

    African Journals Online (AJOL)

    African Journal of Economic Policy: Journal Sponsorship. Journal Home > About the Journal > African Journal of Economic Policy: Journal Sponsorship. Log in or Register to get access to full text downloads.

  1. East African Journal of Statistics: Journal Sponsorship

    African Journals Online (AJOL)

    East African Journal of Statistics: Journal Sponsorship. Journal Home > About the Journal > East African Journal of Statistics: Journal Sponsorship. Log in or Register to get access to full text downloads.

  2. Nigerian Journal of Gastroenterology and Hepatology: Journal ...

    African Journals Online (AJOL)

    Nigerian Journal of Gastroenterology and Hepatology: Journal Sponsorship. Journal Home > About the Journal > Nigerian Journal of Gastroenterology and Hepatology: Journal Sponsorship. Log in or Register to get access to full text downloads.

  3. South African Journal of Education: Journal Sponsorship

    African Journals Online (AJOL)

    South African Journal of Education: Journal Sponsorship. Journal Home > About the Journal > South African Journal of Education: Journal Sponsorship. Log in or Register to get access to full text downloads.

  4. African Journal of Infectious Diseases: Journal Sponsorship

    African Journals Online (AJOL)

    African Journal of Infectious Diseases: Journal Sponsorship. Journal Home > About the Journal > African Journal of Infectious Diseases: Journal Sponsorship. Log in or Register to get access to full text downloads.

  5. African Journal of Paediatric Nephrology: Journal Sponsorship

    African Journals Online (AJOL)

    African Journal of Paediatric Nephrology: Journal Sponsorship. Journal Home > About the Journal > African Journal of Paediatric Nephrology: Journal Sponsorship. Log in or Register to get access to full text downloads.

  6. Nigerian Journal of Soil Science: Journal Sponsorship

    African Journals Online (AJOL)

    Nigerian Journal of Soil Science: Journal Sponsorship. Journal Home > About the Journal > Nigerian Journal of Soil Science: Journal Sponsorship. Log in or Register to get access to full text downloads.

  7. Nigerian Journal of Animal Science: Journal Sponsorship

    African Journals Online (AJOL)

    Nigerian Journal of Animal Science: Journal Sponsorship. Journal Home > About the Journal > Nigerian Journal of Animal Science: Journal Sponsorship. Log in or Register to get access to full text downloads.

  8. Proposed gas generation assembly would recover deeply submerged objects

    Science.gov (United States)

    Sprague, C. W.

    1968-01-01

    Gas generation system, used for recovery of submerged objects, generates hydrogen gas by the reaction of sodium with sea water. The assembly consists of flooded flotation tanks cabled together, equipped with relief valves to equalize pressure as the array ascends and hydrostatic pressure diminishes, and carrying remotely activated welding units.

  9. Implementation of Submerged Arc Welding Training. Final Report.

    Science.gov (United States)

    Bowick, Earl; Todd, John

    A unit on submerged arc welding (SAW) was developed and integrated into the welding program at Seattle Central Community College (Washington) during the period December 1983 through May 1984. During this time, 10 major users of SAW in the area were contacted and mailed questionnaires. Follow up consisted of telephone calls and personal contact as…

  10. Benthic Bacterial Diversity in Submerged Sinkhole Ecosystems▿ †

    Science.gov (United States)

    Nold, Stephen C.; Pangborn, Joseph B.; Zajack, Heidi A.; Kendall, Scott T.; Rediske, Richard R.; Biddanda, Bopaiah A.

    2010-01-01

    Physicochemical characterization, automated ribosomal intergenic spacer analysis (ARISA) community profiling, and 16S rRNA gene sequencing approaches were used to study bacterial communities inhabiting submerged Lake Huron sinkholes inundated with hypoxic, sulfate-rich groundwater. Photosynthetic cyanobacterial mats on the sediment surface were dominated by Phormidium autumnale, while deeper, organically rich sediments contained diverse and active bacterial communities. PMID:19880643

  11. Effects of submerged and anaerobic fermentations on cassava flour ...

    African Journals Online (AJOL)

    Oke Oluwatoyin Victoria

    2015-03-18

    Mar 18, 2015 ... Cassava tubers for processing into cassava flour, Lafun a Nigerian locally fermented product was subjected to two different types of fermentations: submerged and anaerobic fermentation for 72 h. Physicochemical changes that occurred during fermentation and their influence on the functional, rheological ...

  12. Reactive oxygen species mediate growth and death in submerged plants

    Directory of Open Access Journals (Sweden)

    Bianka eSteffens

    2013-06-01

    Full Text Available Aquatic and semi-aquatic plants are well adapted to survive partial or complete submergence which is commonly accompanied by oxygen deprivation. The gaseous hormone ethylene controls a number of adaptive responses to submergence including adventitious root growth and aerenchyma formation. Reactive oxygen species (ROS act as signaling intermediates in ethylene-controlled submergence adaptation and possibly also independent of ethylene. ROS levels are controlled by synthesis, enzymatic metabolism and nonenzymatic scavenging. While the actors are by and large known, we still have to learn about altered ROS at the subcellular level and how they are brought about, and the signaling cascades that trigger a specific response. This review briefly summarizes our knowledge on the contribution of ROS to submergence adaptation and describes spectrophotometrical, histochemical and live cell imaging detection methods that have been used to study changes in ROS abundance. Electron paramagnetic resonance (EPR spectroscopy is introduced as a method that allows identification and quantification of specific ROS in cell compartments. The use of advanced technologies such as EPR spectroscopy will be necessary to untangle the intricate and partially interwoven signaling networks of ethylene and ROS.

  13. Surface Intermediate Zone of Submerged Turbulent Buoyant Jet in Current

    DEFF Research Database (Denmark)

    Chen, H. B.; Larsen, Torben

    1995-01-01

    This paper deals with the intermediate zone between the jet and plume stages of a submerged buoyant discharge from sea outfall in current. The stability criteria, plume width and height after the intermediate zone and the dilution within the intermediate region have been studied theoretically and...

  14. Effects of prolonged elevated water salinity on submerged ...

    African Journals Online (AJOL)

    environmental change, global warming. * To whom all correspondence should be addressed. e-mail: ian.russell@sanparks.org. Received 9 March 2017; accepted in revised form 10 October 2017. INTRODUCTION. Estuarine submerged macrophyte communities can be highly variable at both spatial and temporal scales, ...

  15. Protein enrichment of cassava peel by submerged fermentation ...

    African Journals Online (AJOL)

    PRECIOUS

    2010-01-11

    Jan 11, 2010 ... Key words: Cassava peel, Trichoderma viride, enzyme, submerged fermentation, protein, amino acids. INTRODUCTION. Protein-energy malnutrition remains a major public health problem in many developing countries and there is the need to increase daily intake of protein, especially animal protein, using ...

  16. Relationships between the biomass of waterfowl and submerged ...

    African Journals Online (AJOL)

    The Wilderness Lakes system, comprising three estuarine lakes (Eilandvlei, Langvlei and Rondevlei), supports a diverse waterbird community, which includes 12 duck species and the abundant Red-knobbed Coot Fulica cristata. Biannual counts of waterfowl (ducks and Red-knobbed Coot) and assessments of submerged ...

  17. Protein enrichment of cassava peel by submerged fermentation with ...

    African Journals Online (AJOL)

    Protein enrichment of cassava peel by submerged fermentation with Trichoderma viride (ATCC 36316). OO Ezekiel, OC Aworh, HP Blaschek, TC Ezeji. Abstract. Cassava (Manihot esculenta Crantz) peel is one of the solid wastes produced as a consequence of cassava processing. It is low in protein but contains a large ...

  18. Nitrification in a submerged attached growth bioreactor using Luffa ...

    African Journals Online (AJOL)

    A laboratory-scale submerged attached growth bioreactor using Luffa cylindrica as support material for the immobilization of nitrifying bacteria was applied for polishing the effluent of an UASB reactor treating domestic wastewater under the tropical conditions of northeast Brazil, in the City of Campina Grande (7o 13' 11” ...

  19. Effects of submerged vegetation on water clarity across climates

    NARCIS (Netherlands)

    Kosten, S.; Lacerot, G.; Jeppesen, E.; Motta Marques, D.M.L.; Nes, van E.H.; Mazzeo, N.; Scheffer, M.

    2009-01-01

    A positive feedback between submerged vegetation and water clarity forms the backbone of the alternative state theory in shallow lakes. The water clearing effect of aquatic vegetation may be caused by different physical, chemical, and biological mechanisms and has been studied mainly in temperate

  20. Annular Pressure Seals and Hydrostatic Bearings

    Science.gov (United States)

    2006-11-01

    scale). The equation below presents a close form expression for estimation of the added mass coefficient (MXX) in a seal or squeeze film damper [14...Arauz & L. San Andrés, “ASME Journal of Tribology, 120, pp. 221-233, 1998. [14] Squeeze Film Dampers : Operation, Models and Technical Issues, L. San...fluid film bearing technology with very low number of parts and no DN limit operation. Details on the bulk- flow analysis of turbulent flow

  1. Journal of Earth System Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Earth System Science. S C Patel. Articles written in Journal of Earth System Science. Volume 116 Issue 2 April 2007 pp 143-147. Vesuvianite–wollastonite–grossular-bearing calc-silicate rock near Tatapani, Surguja district, Chhattisgarh · S C Patel · More Details Abstract Fulltext PDF. This paper ...

  2. EcoBears

    DEFF Research Database (Denmark)

    Nielsen, Nick; Pedersen, Sandra Bleuenn; Sørensen, Jens Ager

    2015-01-01

    In this paper, we introduce the EcoBears concept that aims to augment household appliances with functional and aesthetic features to promote their "use'' and "longevity of use'' to prevent their disposal. The EcoBears also aim to support the communication of environmental issues in the home setting...

  3. The salmon bears: giants of the great bear rainforest

    National Research Council Canada - National Science Library

    McAllister, I; Read, N

    2010-01-01

    The Salmon Bears explores the delicate balance that exists between the grizzly, black and spirit bears of the Great Bear Rainforest and their natural environment on the central coast of British Columbia...

  4. Trophic cascades from wolves to grizzly bears or changing abundance of bears and alternate foods?

    Science.gov (United States)

    Barber-Meyer, Shannon M

    2015-05-01

    This is a Forum article commenting on: Ripple, W. J., Beschta, R. L., Fortin, J. K., & Robbins, C. T. (2014) Trophic cascades from wolves to grizzly bears in Yellowstone. Journal of Animal Ecology, 83, 223-233. Comparisons Ripple et al. (2014) used to demonstrate increased fruit availability and consumption by grizzly bears post-wolf reintroduction are flawed and tenuous at best. Importantly, a more parsimonious (than trophic cascades) hypothesis, not sufficiently considered by Ripple et al., exists and is better supported by available data I review. Published 2015. This article is a U. S. Government work and is in the public domain in the USA.

  5. Trophic cascades from wolves to grizzly bears or changing abundance of bears and alternate foods?

    Science.gov (United States)

    Barber-Meyer, Shannon M.

    2015-01-01

    This is a Forum article commenting on: Ripple, W. J., Beschta, R. L., Fortin, J. K., & Robbins, C. T. (2014) Trophic cascades from wolves to grizzly bears in Yellowstone. Journal of Animal Ecology, 83, 223–233. Comparisons Ripple et al. (2014) used to demonstrate increased fruit availability and consumption by grizzly bears post-wolf reintroduction are flawed and tenuous at best. Importantly, a more parsimonious (than trophic cascades) hypothesis, not sufficiently considered by Ripple et al., exists and is better supported by available data I review.

  6. Touchdown Ball-Bearing System for Magnetic Bearings

    Science.gov (United States)

    Kingsbury, Edward P.; Price, Robert; Gelotte, Erik; Singer, Herbert B.

    2003-01-01

    The torque-limited touchdown bearing system (TLTBS) is a backup mechanical-bearing system for a high-speed rotary machine in which the rotor shaft is supported by magnetic bearings in steady-state normal operation. The TLTBS provides ball-bearing support to augment or supplant the magnetic bearings during startup, shutdown, or failure of the magnetic bearings. The TLTBS also provides support in the presence of conditions (in particular, rotational acceleration) that make it difficult or impossible to control the magnetic bearings or in which the magnetic bearings are not strong enough (e.g., when the side load against the rotor exceeds the available lateral magnetic force).

  7. Applying the seedling-emergence method under waterlogged conditions to detect the seed bank of aquatic plants in submerged sediments

    NARCIS (Netherlands)

    Boedeltje, G; ter Heerdt, GNJ; Bakker, JP

    Seed bank studies focused on submerged aquatic plants are generally performed under submerged conditions, using the seedling-emergence method. However, if a study targets at both submerged species and helophytes, submerged conditions are generally not suitable. We tested the emergence of seedlings

  8. Ultra-precision bearings

    CERN Document Server

    Wardle, F

    2015-01-01

    Ultra-precision bearings can achieve extreme accuracy of rotation, making them ideal for use in numerous applications across a variety of fields, including hard disk drives, roundness measuring machines and optical scanners. Ultraprecision Bearings provides a detailed review of the different types of bearing and their properties, as well as an analysis of the factors that influence motion error, stiffness and damping. Following an introduction to basic principles of motion error, each chapter of the book is then devoted to the basic principles and properties of a specific type of bearin

  9. Ethnographic journalism

    DEFF Research Database (Denmark)

    Hermann, Anne Kirstine

    2016-01-01

    Accounting for emerging journalistic genres is a difficult endeavor not least because there is little agreement as to what constitutes journalism itself. Doing so, however, is essential if we are to recognize changing journalistic doxas. To capture such changes, we must include a holistic framework...... journalistic epistemology, changing it through practice. In turn, the analysis reveals how journalism practices can evolve its troubled philosophical position...... require more contextual reporting, ethnographic journalism emerges in American feature journalism. Analyzed holistically, this genre is characterized as the employment of immersion strategies adopted from social science for distinct storytelling purposes. These methods, however, transform conventional...

  10. Methods for geothermal reservoir detection emphasizing submerged environments

    Energy Technology Data Exchange (ETDEWEB)

    Case, C.W.; Wilde, P.

    1976-05-21

    This report has been prepared for the California State Lands Commission to aid them in evaluating exploration programs for geothermal reservoirs, particularly in submerged land environments. Three charts show: (1) a logical progression of specific geologic, geochemical, and geophysical exploration techniques for detecting geothermal reservoirs in various geologic environments with emphasis on submerged lands, (2) various exploration techniques which can be used to develop specific information in geothermal areas, and (3) if various techniques will apply to geothermal exploration according to a detailed geologic classification. A narrative in semi-outline form supplements these charts, providing for each technique; a brief description, advantages, disadvantages, special geologic considerations, and specific references. The specific geologic situation will control the exploration criterion to be used for reservoir detection. General guidelines are established which may be of use in evaluating such a program, but the optimum approach will vary with each situation.

  11. Relationship of engine bearing wear and oil rheology

    Energy Technology Data Exchange (ETDEWEB)

    Olson, D.H.

    1987-01-01

    Engine wear tests were conducted, using two different engine designs, with single and multigrade engine oils. In one engine there was a significant reduction in bearing wear when multigrade oils were used. For the other engine there was evidence of less bearing wear when multigrade oils were used. In both engines correlations were found among bearing wear, high-temperature high-shear-rate viscosity and oil elasticity. It has been shown that the minimum oil film thickness measured for the front main bearing in an operating engine is related to both oil viscosity and elasticity for multigrade oils. The study presented here is an attempt to extend that work to determine if the same oil rheological parameter can be used to establish a correlation to engine journal bearing wear. Two different engines were used and wear was measured for connecting rod big-ends bearings and main bearings. The results ranged from excellent to poor depending on the engine and bearing location within each engine. Despite the limited success in establishing correlations among the oil rheological properties and bearing wear, the results are being presented in the interest of stimulating further work in this important area.

  12. Wave Fluid Film Bearing Tests for an Aviation Gearbox

    Science.gov (United States)

    Dimofte, Florin; Proctor, Margaret P.; Fleming, David P.; Keith, Theo G., Jr.

    2000-01-01

    An oil-lubricated wave journal-thrust bearing assembly was successfully tested at conditions found in general aviation engine gearboxes. The bearing performed well at both steady state conditions and in start-stop tests. It ran stably under all loading conditions, including zero load, at all speeds up to 16 000 rpm. The bearing carried 25 percent more load than required for the gearbox application, supporting 8900 N (94 bars average pressure), and showed very good thermal stability. 450 start-stop cycles were also performed, including 350 cycles without oil supply during starting and stopping. Test results and numerical predictions were in good agreement.

  13. Management recommendations: Bear River

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a review of land management practices at the Bear River Migratory Bird Refuge, by a land use specialist. Recommendations, time frame and additional...

  14. DW_BEAR

    Data.gov (United States)

    Department of Homeland Security — Subset of BEAR (Bi-Weekly Examination Analysis and Reporting) data used for financial audit remediation reporting within the Coast Guard Business Intelligence (CGBI)...

  15. Plain bearing stresses due to forming and oil film pressure

    Energy Technology Data Exchange (ETDEWEB)

    Burke-Veliz, A; Reed, P A S; Syngellakis, S [University of Southampton, School of Engineering Sciences, Southampton SO17 1BJ (United Kingdom); Wang, D; Wahdy, N; Merritt, D, E-mail: allan.burke@itesm.m [MAHLE Engine Systems UK Ltd, 2 Central park Drive, Rugby CV23 0WE (United Kingdom)

    2009-08-01

    This paper describes a methodology for assessing critical stress ranges arising in automotive plain bearings during engine operations. An industry-produced and run simulation program provides information on oil film pressure and overall bearing deformation during accelerated performance tests. This code performs an elasto-hydrodynamic lubrication analysis accounting for the compliance of the housing and journal. Finite element analyses of a multilayer bearing are performed to assess the conditions responsible for possible fatigue damage over the bearing lining. The residual stresses arising from the forming and fitting process are first assessed. The stress analyses over the engine cycle show the intensity and distribution of cyclic tensile and compressive stresses in the bearing. The location of maximum stress range is found to be consistent with the damage observed in accelerated fatigue tests. Critical zones are identified in the lining for possible fatigue crack initiation and growth studies.

  16. Rolling bearing analysis

    CERN Document Server

    Harris, Tedric A

    2001-01-01

    One of the most well-known experts in the field brings cutting-edge research to practitioners in the new edition of this important reference. Covers the improved mathematical calculations for rolling bearing endurance developed by the American Society of Mechanical Engineers and the Society of Lubrication and Tribology Engineers. Updated with new material on Condition-Based Maintenance, new testing methods, and new bearing materials.

  17. Gear bearing drive

    Science.gov (United States)

    Weinberg, Brian (Inventor); Mavroidis, Constantinos (Inventor); Vranish, John M. (Inventor)

    2011-01-01

    A gear bearing drive provides a compact mechanism that operates as an actuator providing torque and as a joint providing support. The drive includes a gear arrangement integrating an external rotor DC motor within a sun gear. Locking surfaces maintain the components of the drive in alignment and provide support for axial loads and moments. The gear bearing drive has a variety of applications, including as a joint in robotic arms and prosthetic limbs.

  18. Antitumor activity of submerged biomass of Hericium erinaceus

    OpenAIRE

    Avtonomova, A.; Bakanov, A.; Vinokurov, V.; Bukhman, V.; Krasnopolskaya, L.

    2011-01-01

    Submerged cultivation of Hericium erinaceus in various media has been studied. The yield of biomass was shown to depend mainly on the carbon source, whereas the content of watersoluble polysaccharides depended primarily on the nitrogen source. Using optimal medium composition, the biomass yield of 22-23 g/l in 7 days was achieved. The antitumor activity was studied in vivo with using 2 tumor strains. The inhibition ratio of tumor in these experience reached 86%. An exposure of mice with tumor...

  19. Submerged beachrock preservation in the context of wave ravinement

    Science.gov (United States)

    Pretorius, Lauren; Green, Andrew N.; Andrew Cooper, J.

    2018-02-01

    This study examines a Holocene-aged submerged shoreline, Limestone Reef, located in the shallow subtidal zone of South Africa's east coast. It comprises an elongate, coast-oblique, slab-like outcrop of beachrock situated above the contemporary fair-weather wave base. It is currently undergoing mechanical disintegration. Its unique and rare preservation in a high-energy setting affords an opportunity to examine the mechanical processes occurring during wave ravinement associated with rising sea level. The submerged shoreline and the adjacent shoreface were examined using high-resolution seismic reflection, side-scan sonar and shallow-water multibeam echosounding techniques. Limestone Reef rests on top of unconsolidated Holocene deposits. The structure's surface is characterised by reef-perpendicular gullies with rubble derived from the slab fringing its seaward edge. Limestone Reef slopes gently seawards and has a steep landward-facing edge where gullies are most prominently developed. Teardrop-shaped rippled scour depressions, marked by high backscatter, are located seawards of the submerged shoreline. These elongate in a seaward direction and are filled with bioclastic gravels and residual rubble from Limestone Reef. The gullies in the upstanding structure are indicative of wave plucking and abrasion of the shoreline. The material exposed by the rippled scour depressions is identical to that comprising the postglacial ravinement surface identified in the offshore stratigraphy. These deposits are considered to represent the contemporary, actively forming wave ravinement surface. The results suggest that wave ravinement of submerged shorelines is a discontinuous process dominated by the seaward entrainment of material from its landward edge controlled by high-energy drawback during storm surges. The ravinement process appears to operate at the seasonal scale and averages out over the long-term millennial scale for the continuous surface.

  20. Submerged Pagodas of Mahabalipuram - Study based on underwater investigations

    Digital Repository Service at National Institute of Oceanography (India)

    Sundaresh; Gaur, A.S.; Tripati, S.; Vora, K.H.; Rao, K.M.

    - gested that this place could have served as an ancient port (Dayalan, 1992). Mahabalipuram was well known to earlier mariners as 'Seven Pagodas' since the 1 7h century AD. it is generally believed that out of 7 temples originally con- structed, all... based on the local traditions and available literature. The local tradition and the people of Mahabalipuram believe that five temples similar to the Shore Temple have been submerged in the sea. On the basis of local traditions Ancient Tamil...

  1. Instrumentation, control, and automation for submerged anaerobic membrane bioreactors

    OpenAIRE

    Robles Martínez, Ángel; Durán Pinzón, Freddy; Ruano García, María Victoria; Ribes Bertomeu, José; Rosado Muñoz, Alfredo; SECO TORRECILLAS, AURORA; Ferrer, J.

    2015-01-01

    A submerged anaerobic membrane bioreactor (AnMBR) demonstration plant with two commercial hollow-fibre ultrafiltration systems (PURON® , Koch Membrane Systems, PUR-PSH31) was designed and operated for urban wastewater treatment. An instrumentation, control, and automation (ICA) system was designed and implemented for proper process performance. Several single-input-single-output (SISO) feedback control loops based on conventional on off and PID algorithms were implemented to control the follo...

  2. Hydrodynamic Analyses and Evaluation of New Fluid Film Bearing Concepts

    Science.gov (United States)

    Keith, Theo G., Jr.; Dimofte, Florin

    1998-01-01

    Over the past several years, numerical and experimental investigations have been performed on a waved journal bearing. The research work was undertaken by Dr. Florin Dimofte, a Senior Research Associate in the Mechanical Engineering Department at the University of Toledo. Dr. Theo Keith, Distinguished University Professor in the Mechanical Engineering Department was the Technical Coordinator of the project. The wave journal bearing is a bearing with a slight but precise variation in its circular profile such that a waved profile is circumscribed on the inner bearing diameter. The profile has a wave amplitude that is equal to a fraction of the bearing clearance. Prior to this period of research on the wave bearing, computer codes were written and an experimental facility was established. During this period of research considerable effort was directed towards the study of the bearing's stability. The previously developed computer codes and the experimental facility were of critical importance in performing this stability research. A collection of papers and reports were written to describe the results of this work. The attached captures that effort and represents the research output during the grant period.

  3. New Journalism.

    Science.gov (United States)

    Fishwick, Marshall, Ed.

    This volume contains a selection of articles which examine, critique, and help to define the phenomenon of new journalism. Included are "Popular Culture and the New Journalism" (Marshall Fishwick), "Entrance" (Richard A. Kallan), "How 'New'?" (George A. Hough III), "Journalistic Primitivism" (Everette E. Dennis), "Wherein Lies the Value?" (Michael…

  4. Journal History

    African Journals Online (AJOL)

    Tanzania Journal of Health Research was established in 1997 as Tanzania Health Research Bulletin. ISSN: 1821-9241. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL · News.

  5. Journalism Forum.

    Science.gov (United States)

    Journalism Educator, 1981

    1981-01-01

    Five journalism educators report on surveys examining (1) the hiring of teachers and the course content needed for the public relations curriculum; (2) the study of journalism history; (3) the structure, purpose, and content of photojournalism courses; and (4) problems created by the increased use of electronic laboratory equipment in journalism…

  6. Radio Journalism.

    Science.gov (United States)

    Bittner, John R.; Bittner, Denise A.

    This book, a how-to-do-it guide for the novice and the professional alike, deals with several aspects of radio journalism: producing documentaries, preparing and announcing radio news, ethics and responsibility, regulation of radio journalism, and careers. It traces the history and growth of radio news, shows its impact on the public, and…

  7. After Journalism.

    Science.gov (United States)

    Jurgensen, Karen; Meyer, Philip

    1992-01-01

    Maintains that the central journalistic function is changing from the transportation of information to its processing. Offers a model for the more sophisticated standard of objectivity needed by the new process-intensive journalism. Discusses changes in journalism training to meet these demands. (SR)

  8. On the submerging of a spherical intruder into granular beds

    Science.gov (United States)

    Wu, Chuan-Yu; Zhang, Ling; Chen, Lan

    2017-06-01

    Granular materials are complex systems and their mechanical behaviours are determined by the material properties of individual particles, the interaction between particles and the surrounding media, which are still incompletely understood. Using an advanced discrete element method (DEM), we simulate the submerging process of a spherical projectile (an intruder) into granular materials of various properties with a zero penetration velocity (i.e. the intruder is touching the top surface of the granular bed and released from stationary) and examine its settling behaviour. By systematically changing the density and size of the intruder and the particle density (i.e. the density of the particles in the granular bed), we find that the intruder can sink deep into the granular bed even with a zero penetration velocity. Furthermore, we confirm that under certain conditions the granular bed can behave like a Newtonian liquid and the submerging intruder can reach a constant velocity, i.e. the terminal velocity, identical to the settling of a sphere in a liquid, as observed experimentally. A mathematical model is also developed to predict the maximum penetration depth of the intruder. The model predictions are compared with experimental data reported in the literature,good agreement was obtained, demonstrating the model can accurately predict the submerging behaviour of the intruder in the granular media.

  9. Research efforts for detection and recovery of submerged oil

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, K. [United States Coast Guard, Groton, CT (United States). Research and Development Center

    2009-07-01

    Submerged oil can sink and destroy shellfish and other marine populations in addition to causing closure of water intakes at industrial facilities and power plants. However, current methods to find and recover oil from spills involving submerged oil are inadequate. The underwater environment presents major challenges such as poor visibility, difficulty in tracking oil spill movement, colder temperatures, inadequate containment methods and problems with the equipment's interaction with water. This paper reported on a multi-year project launched by the Research and Development Center of the United States Coast Guard to develop a complete approach for spills of submerged oil. The project involved detection technologies and recovery methods for oil on the bottom of any body of water. Proof of concept (POC) and prototype tests of potential detection technologies were evaluated during tests at the Ohmsett facility in Leonardo, New Jersey. The technologies included sonar, laser fluorometry, real-time mass spectrometry and in-situ fluorometry. This paper described the development of a complete specification for an integrated recovery system along with a plan for future development. 9 refs., 2 tabs., 11 figs.

  10. Measurement of Submerged Oil/Gas Leaks using ROV Video

    Science.gov (United States)

    Shaffer, Franklin; de Vera, Giorgio; Lee, Kenneth; Savas, Ömer

    2013-11-01

    Drilling for oil or gas in the Gulf of Mexico is increasing rapidly at depths up to three miles. The National Commission on the Deepwater Horizon Oil Leak concluded that inaccurate estimates of the leak rate from the Deepwater Horizon caused an inadequate response and attempts to cap the leak to fail. The first response to a submerged oil/gas leak will be to send a Remotely Operated Vehicle (ROV) down to view the leak. During the response to the Deepwater Horizon crisis, the authors Savas and Shaffer were members of the Flow Rate Technical Group's Plume Team who used ROV video to develop the FRTG's first official estimates of the oil leak rate. Savas and Shaffer developed an approach using the larger, faster jet features (e.g., turbulent eddies, vortices, entrained particles) in the near-field developing zone to measure discharge rates. The authors have since used the Berkeley Tow Tank to test this approach on submerged dye-colored water jets and compressed air jets. Image Correlation Velocimetry has been applied to measure the velocity of visible features. Results from tests in the Berkeley Tow Tank and submerged oil jets in the OHMSETT facility will be presented.

  11. Production of Alpha Amylase by Bacillus cereus in Submerged Fermentation

    Directory of Open Access Journals (Sweden)

    Helen H. Raplong

    2014-09-01

    Full Text Available Microorganisms have the ability to secrete enzymes when they are grown in the presence of certain substrates. Amylases are among the most important industrial enzymes and are of great significance in biotechnological studies. Bacteria belonging to the genus Bacillus were isolated using mannitol egg yolk polymyxin B (MYP agar a highly selective media for Bacillus cereus isolation. The isolates were tested for α-amylase production on nutrient agar supplemented with starch and in submerged fermentation. The bacteria isolated and identified (using the Microgen Bacillus identification kit were all Bacillus cereus and SB2 had the largest zone of hydrolysis of 12mm on nutrient agar supplemented with starch as well as the highest enzyme activity of 1.62U/ml. Amylase activity of 2.56U/ml was obtained after 24 hours incubation in submerged fermentation. When amylase enzyme production parameters where optimized, maximum amylase activity was obtained at a pH of 6.5, temperature of 350C, incubation time of 24 hours and 4% inoculums concentration. Bacillus cereus SB2 is a potential isolate for alpha-amylase production with soluble starch as the sole carbon source in submerged fermentation.

  12. On the submerging of a spherical intruder into granular beds

    Directory of Open Access Journals (Sweden)

    Wu Chuan-Yu

    2017-01-01

    Full Text Available Granular materials are complex systems and their mechanical behaviours are determined by the material properties of individual particles, the interaction between particles and the surrounding media, which are still incompletely understood. Using an advanced discrete element method (DEM, we simulate the submerging process of a spherical projectile (an intruder into granular materials of various properties with a zero penetration velocity (i.e. the intruder is touching the top surface of the granular bed and released from stationary and examine its settling behaviour. By systematically changing the density and size of the intruder and the particle density (i.e. the density of the particles in the granular bed, we find that the intruder can sink deep into the granular bed even with a zero penetration velocity. Furthermore, we confirm that under certain conditions the granular bed can behave like a Newtonian liquid and the submerging intruder can reach a constant velocity, i.e. the terminal velocity, identical to the settling of a sphere in a liquid, as observed experimentally. A mathematical model is also developed to predict the maximum penetration depth of the intruder. The model predictions are compared with experimental data reported in the literature,good agreement was obtained, demonstrating the model can accurately predict the submerging behaviour of the intruder in the granular media.

  13. Submerged-arc welding slags: characterization and leaching strategies for the removal of aluminum and titanium.

    Science.gov (United States)

    Annoni, Raquel; Souza, Poliana Santos; Petrániková, Martina; Miskufova, Andrea; Havlík, Tomáš; Mansur, Marcelo Borges

    2013-01-15

    In the present study, submerged-arc welding slags were characterized by applying a variety of methods, including X-ray fluorescence, X-ray diffraction, particle size, Raman spectroscopy, and scanning electron microscope with energy dispersive X-ray analysis. The content of Al proved to be quite similar within neutral and acid slags (10-14%), while that of Ti proved to be much higher in acid slags (approximately 10%) than in neutral slags (<1%). The presence of spinel structures associated with Al species could also be identified in the analyzed samples. This characterization study was accompanied by leaching tests performed under changing operating conditions in an attempt to evaluate to what extent the Al and Ti bearing components could be removed from the slags. The leaching work involved three distinct strategies: (i) NaOH leaching followed by H(2)SO(4) leaching, (ii) acid leaching (HCl and H(2)SO(4)) using oxidizing/reducing agents, and (iii) slag calcination followed by H(2)SO(4) leaching. In the best result, 80% of Al was extracted in one single leaching stage after calcination of the acid slag with NaCl+C at 900 °C. By contrast, the removal of Ti proved to be unsatisfactory. Copyright © 2012 Elsevier B.V. All rights reserved.

  14. Securities Market Journal: About this journal

    African Journals Online (AJOL)

    Securities Market Journal: About this journal. Journal Home > Securities Market Journal: About this journal. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. People. » Contact ...

  15. Highland Medical Research Journal: About this journal

    African Journals Online (AJOL)

    Highland Medical Research Journal: About this journal. Journal Home > Highland Medical Research Journal: About this journal. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives ...

  16. East African Orthopaedic Journal: About this journal

    African Journals Online (AJOL)

    East African Orthopaedic Journal: About this journal. Journal Home > East African Orthopaedic Journal: About this journal. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. People.

  17. Methane oxidation associated to submerged brown-mosses buffers methane emissions from Siberian polygonal peatlands

    Science.gov (United States)

    Liebner, Susanne; Zeyer, Josef; Knoblauch, Christian

    2010-05-01

    study gives first evidence for MAMO in submerged brown-mosses and in the oligotrophic polygonal peatlands of the Lena Delta. It shows that MAMO might effectively reduce methane fluxes to the atmosphere also in Arctic GHG emission hot spots. References: [1] Zhang, T., Barry, R.G., Knowles, K., Heginbottom, J.A., and Brown, J. (1999) Statistics and characteristics of permafrost and ground-ice distribution in the Northern Hemisphere. Polar Geography 23(2): 132-154 [2] Schuur, E.A.G., Bockheim, J., Candell, J.G., Euskirchen, E., Field, C.B., Goryachkin, S.V., Hagemann, S., Kuhry, P., Lafleur, P.M., Lee, H., Mazhitova, G., Nelson, F.E., Rinke, A., Romanovsky, V., Shiklomanov, N., Tarnocai, C., Venevsky, S., Vogel, J., and Zimov, S. (2008) Vulnerability of Permafrost Carbon to Climate Change: Implications for the Global Carbon Cycle. BioScience 58 (8): 701-714 [3] Denman, K.L., Brasseur G., Chidthaisong A., Ciais, P., Cox, P.M., Dickinson, R.E., Hauglustaine, D., Heinze, C., Holland, E., Jacob, D., Lohmann, U., Ramachandran, S., da Silva Dias, P.L., Wofsy, S.C., and Zhang, X. (2007) Couplings Between Changes in the Climate System and Biogeochemistry. In: Climate Change 2007: The Physical Science Basis. Contribution of Working Group I to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change [Solomon, S., D. Qin, M. Manning, Z. Chen, M. Marquis, K.B. Averyt, M.Tignor and H.L. Miller (eds.)]. Cambridge University Press, Cambridge, United Kingdom and New York, NY, USA [4] Wuebbles, J., and Hayhoe, K. (2002) Atmospheric methane and global change. Earth-Science Reviews 57: 177-210 [5] Sachs, T., Wille, C., Boike, J., and Kutzbach, L. (2008) Environmental controls on ecosystem-scale CH4 emission from polygonal tundra in the Lena River Delta, Siberia. Journal of Geophysical Research 113: G00A03 [6] Wille, C., Kutzbach, L., Sachs, T., Wagner, D., and Pfeiffer, E.M. (2008) Methane emissions from Siberian arctic polygonal tundra: Eddy covariance measurements and

  18. Climate Drives Polar Bear Origins

    Science.gov (United States)

    In their provocative analysis of northern bears (“Nuclear genomic sequences reveal that polar bears are an old and distinct bear lineage,” Reports, 20 April, p. 344), F. Hailer et al. use independent nuclear loci to show that polar bears originated during the middle Pleistocene, rather than during t...

  19. Tribology of alternative bearings.

    Science.gov (United States)

    Fisher, John; Jin, Zhongmin; Tipper, Joanne; Stone, Martin; Ingham, Eileen

    2006-12-01

    The tribological performance and biological activity of the wear debris produced has been compared for highly cross-linked polyethylene, ceramic-on-ceramic, metal-on-metal, and modified metal bearings in a series of in vitro studies from a single laboratory. The functional lifetime demand of young and active patients is 10-fold greater than the estimated functional lifetime of traditional polyethylene. There is considerable interest in using larger diameter heads in these high demand patients. Highly cross-linked polyethylene show a four-fold reduction in functional biological activity. Ceramic-on-ceramic bearings have the lowest wear rates and least reactive wear debris. The functional biological activity is 20-fold lower than with highly cross-linked polyethylene. Hence, ceramic-on-ceramic bearings address the tribological lifetime demand of highly active patients. Metal-on-metal bearings have substantially lower wear rates than highly cross-linked polyethylene and wear decreases with head diameter. Bedding in wear is also lower with reduced radial clearance. Differential hardness ceramic-on-metal bearings and the application of ceramic-like coatings reduce metal wear and ion levels.

  20. Antioxidant Properties of the Edible Basidiomycete Armillaria mellea in Submerged Cultures

    OpenAIRE

    Lung, Ming-Yeou; Chang, Yu-Cheng

    2011-01-01

    Antioxidant components, ascorbic acid, total flavonoids and total phenols are produced effectively by Armillaria mellea submerged cultures. Dried mycelia and mycelia-free broths obtained by A. mellea submerged cultures are extracted with methanol and hot water and investigated for antioxidant properties. Methanolic extracts from dried mycelia (MEM) and mycelia-free broth (MEB) and hot water extracts from dried mycelia (HWEM) by A. mellea submerged cultures show good antioxidant properties as ...

  1. Enhanced effects of biotic interactions on predicting multispecies spatial distribution of submerged macrophytes after eutrophication

    OpenAIRE

    Song, Kun; Cui, Yichong; Zhang, Xijin; Pan, Yingji; Xu, Junli; Xu, Kaiqin; Da, Liangjun

    2017-01-01

    Abstract Water eutrophication creates unfavorable environmental conditions for submerged macrophytes. In these situations, biotic interactions may be particularly important for explaining and predicting the submerged macrophytes occurrence. Here, we evaluate the roles of biotic interactions in predicting spatial occurrence of submerged macrophytes in 1959 and 2009 for Dianshan Lake in eastern China, which became eutrophic since the 1980s. For the four common species occurred in 1959 and 2009,...

  2. Lifestyle Journalism

    DEFF Research Database (Denmark)

    From, Unni; Kristensen, Nete Nørgaard

    2013-01-01

    Lifestyle journalism has experienced enormous growth in the media over the past two decades, but scholars in the fields of journalism and communication studies have so far paid relatively little attention to a field that is still sometimes seen as "not real journalism". There is now an urgent need...... for in-depth exploration and contextualisation of this field, with its increasing relevance for 21st century consumer cultures. For the first time, this book presents a wide range of studies which have engaged with the field of lifestyle journalism in order to outline the various political, economic......, social and cultural tensions within it. Taking a comparative view, the collection includes studies covering four continents, including countries such as Australia, China, Norway, Denmark, Singapore, the UK and the USA. While keeping the broader lifestyle field in mind, the chapters focus on a variety...

  3. Afrimedic Journal

    African Journals Online (AJOL)

    PROMOTING ACCESS TO AFRICAN RESEARCH ... The purpose of this journal is to promote clinical and academic excellence in basic and clinical ... We consider any original work that advances or illuminates medical science or practice.

  4. Radial Halbach Magnetic Bearings

    Science.gov (United States)

    Eichenberg, Dennis J.; Gallo, Christopher A.; Thompson, William K.

    2009-01-01

    Radial Halbach magnetic bearings have been investigated as part of an effort to develop increasingly reliable noncontact bearings for future high-speed rotary machines that may be used in such applications as aircraft, industrial, and land-vehicle power systems and in some medical and scientific instrumentation systems. Radial Halbach magnetic bearings are based on the same principle as that of axial Halbach magnetic bearings, differing in geometry as the names of these two types of bearings suggest. Both radial and axial Halbach magnetic bearings are passive in the sense that unlike most other magnetic bearings that have been developed in recent years, they effect stable magnetic levitation without need for complex active control. Axial Halbach magnetic bearings were described in Axial Halbach Magnetic Bearings (LEW-18066-1), NASA Tech Briefs, Vol. 32, No. 7 (July 2008), page 85. In the remainder of this article, the description of the principle of operation from the cited prior article is recapitulated and updated to incorporate the present radial geometry. In simplest terms, the basic principle of levitation in an axial or radial Halbach magnetic bearing is that of the repulsive electromagnetic force between (1) a moving permanent magnet and (2) an electric current induced in a stationary electrical conductor by the motion of the magnetic field. An axial or radial Halbach bearing includes multiple permanent magnets arranged in a Halbach array ("Halbach array" is defined below) in a rotor and multiple conductors in the form of wire coils in a stator, all arranged so the rotary motion produces an axial or radial repulsion that is sufficient to levitate the rotor. A basic Halbach array (see Figure 1) consists of a row of permanent magnets, each oriented so that its magnetic field is at a right angle to that of the adjacent magnet, and the right-angle turns are sequenced so as to maximize the magnitude of the magnetic flux density on one side of the row while

  5. Partial tooth gear bearings

    Science.gov (United States)

    Vranish, John M. (Inventor)

    2010-01-01

    A partial gear bearing including an upper half, comprising peak partial teeth, and a lower, or bottom, half, comprising valley partial teeth. The upper half also has an integrated roller section between each of the peak partial teeth with a radius equal to the gear pitch radius of the radially outwardly extending peak partial teeth. Conversely, the lower half has an integrated roller section between each of the valley half teeth with a radius also equal to the gear pitch radius of the peak partial teeth. The valley partial teeth extend radially inwardly from its roller section. The peak and valley partial teeth are exactly out of phase with each other, as are the roller sections of the upper and lower halves. Essentially, the end roller bearing of the typical gear bearing has been integrated into the normal gear tooth pattern.

  6. GigaUnit Transplant System: A New Mechanical Tool for Transplanting Submerged Aquatic Vegetation

    National Research Council Canada - National Science Library

    Shafer, Deborah J

    2008-01-01

    Submerged aquatic vegetation (SAV) performs many important ecosystem functions, including wave attenuation and sediment stabilization, water quality improvement, primary production, food web support for secondary consumers...

  7. Modular gear bearings

    Science.gov (United States)

    Vranish, John M. (Inventor)

    2009-01-01

    A gearing system using modular gear bearing components. Each component is composed of a core, one or more modules attached to the core and two or more fastening modules rigidly attaching the modules to the core. The modules, which are attached to the core, may consist of gears, rollers or gear bearing components. The core orientation affects the orientation of the modules attached to the core. This is achieved via the keying arrangement of the core and the component modules that attach to the core. Such an arrangement will also facilitate the phase tuning of gear modules with respect to the core and other gear modules attached to the core.

  8. Future developments and applications of nitrogen-bearing steels ...

    Indian Academy of Sciences (India)

    Annual Meetings · Mid Year Meetings · Discussion Meetings · Public Lectures · Lecture Workshops · Refresher Courses · Symposia. Home; Journals; Sadhana; Volume 28; Issue 3-4. Future developments and applications of nitrogen-bearing steels and stainless steels. J Foct. Volume 28 Issue 3-4 June-August 2003 pp 731- ...

  9. Research of the Quality of Quarry Dumpers Engine Crankshafts Sliding Bearings of Various Manufacturers

    OpenAIRE

    Korotkov Alexander; Korotkova Lidiya; Vidin Denis

    2017-01-01

    Sliding bearings are an important part of many large and critical components. They are widely used in power equipment, high-capacity pumps, compressors, electric motors and internal combustion engines (ICE). As a rule, sliding bearings include an antifriction bushing, part of the shaft surface (bearing journal), and a layer of oil between them. These are complex and critical parts in which there may occur dangerous defects, and which directly affect the durability, accuracy and reliability of...

  10. Tilting-Pad Guide Bearing in Large Hydro-unit

    Directory of Open Access Journals (Sweden)

    Li-Feng Ma

    2000-01-01

    Full Text Available A new numerical method is proposed for predicting the nonlinearity of tilting-pad guide bearing oilfilm force in the rotor-bearing system in a large hydro-unit. Nonlinear displacement and velocity of the journal center, as well as nonlinear tilting angles and angular velocities of the pads in non-stationary Reynolds equation are taken into account. This method is also suited for other small rotor-bearing system. As an example, the response due to a momentarily created unbalance is Calculated. The nonlinear motion patterns of the pad and journal whirling orbit are obtained. Finally, the nonlinear orbit is compared to the linear one that could be calculated from linear stiffness and damping coefficients. It is shown that there are important differences between those two orbits and that the nonlinear simulation is more accurate.

  11. Compatibility of Anti-Wear Additives with Non-Ferrous Engine Bearing Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Qu, Jun [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Zhou, Yan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-01-01

    Investigate the compatibility of engine lubricant antiwear (AW) additives, specifically conventional zinc dialkyldithiophosphate (ZDDP) and newly developed ionic liquids (ILs), with selected non-ferrous engine bearing alloys, specifically aluminum and bronze alloys that are commonly used in connecting rod end journal bearings and bushings, to gain fundamental understanding to guide future development of engine lubricants

  12. EAARL coastal topography-western Florida, post-Hurricane Charley, 2004: seamless (bare earth and submerged.

    Science.gov (United States)

    Nayegandhi, Amar; Bonisteel, Jamie M.; Wright, C. Wayne; Sallenger, A.H.; Brock, John C.; Yates, Xan

    2010-01-01

    processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website. Selected References Brock, J.C., Wright, C.W., Sallenger, A.H., Krabill, W.B., and Swift, R.N., 2002, Basis and methods of NASA airborne topographic mapper Lidar surveys for coastal studies: Journal of Coastal Research, v. 18, no. 1, p. 1-13. Crane, Michael, Clayton, Tonya, Raabe, Ellen, Stoker, Jason, Handley, Larry, Bawden, Gerald, Morgan, Karen, and Queija, Vivian, 2004, Report of the U.S. Geological Survey Lidar workshop sponsored by the Land Remote Sensing Program and held in St. Petersburg, FL, November 2002: U.S. Geological Survey Open-File Report 2004-1456, 72 p. Nayegandhi, Amar, Brock, J.C., and Wright, C.W., 2009, Small-footprint, waveform-resolving Lidar estimation of submerged and sub-canopy topography in coastal environments: International Journal of Remote Sensing, v. 30, no. 4, p. 861-878. Sallenger, A.H., Wright, C.W., and Lillycrop, Jeff, 2005, Coastal impacts of the 2004 hurricanes measured with airborne Lidar; initial results: Shore and Beach, v. 73, nos. 2-3, p. 10-14. Resources Included Readme.txt File

  13. Restoring Ecological Function to a Submerged Salt Marsh

    Science.gov (United States)

    Stagg, C.L.; Mendelssohn, I.A.

    2010-01-01

    Impacts of global climate change, such as sea level rise and severe drought, have altered the hydrology of coastal salt marshes resulting in submergence and subsequent degradation of ecosystem function. A potential method of rehabilitating these systems is the addition of sediment-slurries to increase marsh surface elevation, thus ameliorating effects of excessive inundation. Although this technique is growing in popularity, the restoration of ecological function after sediment addition has received little attention. To determine if sediment subsidized salt marshes are functionally equivalent to natural marshes, we examined above- and belowground primary production in replicated restored marshes receiving four levels of sediment addition (29-42 cm North American Vertical Datum of 1988 [NAVD 88]) and in degraded and natural ambient marshes (4-22 cm NAVD 88). Moderate intensities of sediment-slurry addition, resulting in elevations at the mid to high intertidal zone (29-36 cm NAVD 88), restored ecological function to degraded salt marshes. Sediment additions significantly decreased flood duration and frequency and increased bulk density, resulting in greater soil drainage and redox potential and significantly lower phytotoxic sulfide concentrations. However, ecological function in the restored salt marsh showed a sediment addition threshold that was characterized by a decline in primary productivity in areas of excessive sediment addition and high elevation (>36 cm NAVD 88). Hence, the addition of intermediate levels of sediment to submerging salt marshes increased marsh surface elevation, ameliorated impacts of prolonged inundation, and increased primary productivity. However, too much sediment resulted in diminished ecological function that was equivalent to the submerged or degraded system. ?? 2010 Society for Ecological Restoration International.

  14. Enhanced Sorbitol Production under Submerged Fermentation using Lactobacillus plantarum

    Directory of Open Access Journals (Sweden)

    Khan Nadiya Jan

    2017-04-01

    Full Text Available Background and Objective: Sorbitol is a non-toxic and slightly hygroscopic compound with different applications. Zymomonas mobiles produces sorbitol from sucrose or mixtures of glucose and fructose (formation is coupled with the dehydrogenation of glucose to glucono-δ- lactone. Recombinant Zymomonas mobilis may produce sorbitol and gluconic acid from glucose and fructose using different divalent metal ions with reduced the ethanol yield andsignificantly increased yield of sorbitol. Current study envisaged to alter the media components, physical process parameters and supplementation of amino acids for enhanced sorbitol production.Material and Methods: Several process variables were evaluated on sorbitol production including carbon sources (glucose, fructose, maltose, sucrose, carbon concentrations (5, 10, 20 and 25 g l-1, nitrogen sources (peptone, tryptone, yeast extract, beef extract and organic nitrogen mix, temperatures (25, 29, 33, 37, 41°C, pH (6, 6.5, 7 , 7.5 ,8, agitation rate (50, 100, 150, 200 rpm and amino acids (cysteine, cystine, tryptophanin batch cultivation ofLactobacillus plantarum NCIM 2912. Shake flask cultivation performed under optimum conditions like temperature 37°C, pH 7.0 and agitation rate of 150 rpm, resulted in enhanced sorbitol production. Comparative study of sorbitol production in solid state fermentation and submerged fermentation was also evaluated.Results and Conclusion: Batch cultivation under submerged conditions further performed in 7.5-l lab scale bioreactor (working volume 3.0-l under optimized conditions resulted in maximum cell biomass of 8.95±0.03 g g-1 and a sorbitol content of 9.78±0.04 g l-1 after 42.0 h of fermentation. Scale up study on bioreactor resulted in maximum sorbitol yield (Yp/x and productivity of 1.11 g g-1 and 0.50 g l-1 h under submerged fermentation, respectively.Conflict of interest: The authors declare no conflict of interest.

  15. [Genetic algorithm for fermentation kinetics of submerged fermentation by Morchella].

    Science.gov (United States)

    Wang, Ying; Piao, Meizi; Sun, Yonghai

    2008-08-01

    Fermentation kinetics is important for optimizing control and up-scaling fermentation process. We studied submerged fermentation kinetics of Morchella. Applying the genetic Algorithm in the Matlab software platform, we compared suitability of the Monod and Logistic models, both are commonly used in process of fungal growth, to describe Morchella growth kinetics. Meanwhile, we evaluated parameters involved in the models for Morchella growth, EPS production and substrate consumption. The results indicated that Logistic model fit better with the experimental data. The average error of this model was 5.8%. This kinetics model can be useful for optimizing and up-scaling fungal fermentation process.

  16. Liquid Film Diffusion on Reaction Rate in Submerged Biofilters

    DEFF Research Database (Denmark)

    Christiansen, Pia; Hollesen, Line; Harremoës, Poul

    1995-01-01

    Experiments were carried out in order to investigate the influence of liquid film diffusion on reaction rate in a submerged biofilter with denitrification and in order to compare with a theoretical study of the mass transfer coefficient. The experiments were carried out with varied flow, identified...... by the empty bed velocity of inflow and recirculation, respectively 1.3, 2.8, 5.6 and 10.9 m/h. The filter material consisted of 3 mm biostyren spheres. The results indicate that the influence of liquid film diffusion on reaction rate can be ignored....

  17. Slag Metal Reactions during Submerged Arc Welding of Alloy Steels

    Science.gov (United States)

    Mitra, U.; Eagar, T. W.

    1984-01-01

    The transfer of Cr, Si, Mn, P, S, C, Ni, and Mo between the slag and the weld pool has been studied for submerged arc welds made with calcium silicate and manganese silicate fluxes. The results show a strong interaction between Cr and Si transfer but no interaction with Mn. The manganese silicate flux produces lower residual sulfur while the calcium silicate fluxes are more effective for removal of phosphorus. The effective oxygen reaction temperature lies between 1700 and 2000 °C for all elements studied. Evidence of Cr and Mn loss by metal vaporization is also presented.

  18. Hybrid superconductor magnet bearings

    Science.gov (United States)

    Chu, Wei-Kan

    1995-01-01

    Hybrid superconductor magnet bearings (HSMB's) utilize high temperature superconductors (HTS's) together with permanent magnets to form a frictionless interface between relatively rotating parts. They are low mass, stable, and do not incur expenditure of energy during normal operation. There is no direct physical contact between rotor and stator, and hence there is no wear and tear. However, just as any other applications of HTS's, it requires a very cold temperature to function. Whereas this might be perceived as a disadvantage on earth, it is of no great concern in space or on the moon. To astronomers, the moon is an excellent site for an observatory, but the cold and dusty vacuum environment on the moon precludes the use of mechanical bearings on the telescope mounts. Furthermore, drive mechanisms with very fine steps, and hence bearings with extremely low friction are needed to track a star from the moon, because the moon rotates very slowly. All aspects considered, the HSMB is about the only candidate that fits in naturally. Here, we present a design for one such bearing, capable of supporting a telescope that weighs about 3 lbs on Earth.

  19. About this journal

    African Journals Online (AJOL)

    International Journal of Basic, Applied and Innovative Research: About this journal. Journal Home > International Journal of Basic, Applied and Innovative Research: About this journal. Log in or Register to get access to full text downloads.

  20. Ethiopian Pharmaceutical Journal

    African Journals Online (AJOL)

    Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. Journal Homepage Image. The Ethiopian Pharmaceutical Journal is an international journal devoted to research concerning all aspects of pharmaceutical sciences.

  1. African Journals Online (AJOL)

    African Journals Online (AJOL)

    reviewed, African-published scholarly journals. ... Featured Country: Nigeria, Featured Journal: International Journal of Medicine and Biomedical Research ... Vol 8, No 2 (2017): Journal of Language, Technology & Entrepreneurship in Africa. Journal ...

  2. A fully superconducting bearing system for flywheel applications

    Science.gov (United States)

    Xu, Ke-xi; Wu, Dong-jie; Jiao, Y. L.; Zheng, M. H.

    2016-06-01

    A fully superconducting magnetic suspension structure has been designed and constructed for the purpose of superconducting bearing applications in flywheel energy storage systems. A thrust type bearing and two journal type bearings, those that are composed of melt textured high-Tc superconductor YBCO bulks and Nd-Fe-B permanent magnets, are used in the bearing system. The rotor dynamical behaviors, including critical speeds and rotational loss, are studied. Driven by a variable-frequency three-phase induction motor, the rotor shaft attached with a 25 kg flywheel disc can be speeded up to 15 000 rpm without serious resonance occurring. Although the flywheel system runs stably in the supercritical speeds region, very obvious rotational loss is unavoidable. The loss mechanism has been discussed in terms of eddy current loss and hysteresis loss.

  3. Journal Watch

    Directory of Open Access Journals (Sweden)

    Jennifer Herzog

    2012-08-01

    Full Text Available The Journal Watch section highlights published journal articles which discuss recent developments and new technology used in microbiology and related fields. In this issue, highlighted articles include an examination of the ED pathway’s role in microbial sugar metabolism and in the upregulation of virulence genes, landmark companion papers from the Human Microbiome Project Consortium regarding population-scale metagenomic studies, and a new method for in vitro culturing of the malarial parasite for application in drug and vaccine development.

  4. Nigerian Journal of Clinical Medicine: Submissions

    African Journals Online (AJOL)

    Consequently, NJCM, its Editorial Board and LASUTH-ARD bear no legal responsibility for such opinions. Authors are encouraged to send their manuscripts to the LASUTH-ARD Secretariat addressed to: The Editor, Nigerian Journal of Clinical Medicine (NJCM). An electronic copy of the manuscript in Microsoft Word format ...

  5. Cathodic disbonding of organic coatings on submerged steel

    Energy Technology Data Exchange (ETDEWEB)

    Knudsen, Ole oeystein

    1998-12-31

    In offshore oil production, submerged steel structures are commonly protected by an organic coating in combination with cathodic protection. The main advantage is that the coating decreases the current demand for cathodic protection. But the coating degrades with time. This thesis studies one of the most important mechanisms for coating degradation in seawater, cathodic disbonding. Seven commercial coatings and two model coatings with various pigmentations have been studied. Parameter studies, microscopy and studies of free films were used in the mechanism investigations. Exposure to simulated North Sea conditions was used in the performance studies. The effect of aluminium and glass barrier pigments on cathodic disbonding was investigated. The mechanism for the effect of the aluminium pigments on cathodic disbonding was also investigated. The transport of charge and oxygen to the steel/coating interface during cathodic disbonding was studied for two epoxy coatings. Cathodic disbonding, blistering and current demand for cathodic protection was measured for nine commercial coatings for submerged steel structures, using the ASTM-G8 standard test and a long term test under simulated North Sea conditions. The relevance of the ASTM-G8 test as a prequalification test was evaluated. 171 refs., 40 figs., 6 tabs.

  6. Period Doubling in Bubbling from a Submerged Nozzle

    Science.gov (United States)

    Dennis, Jordan; Grace, Laura; Lehman, Susan

    The timing of bubbles rising from a nozzle submerged in a viscous solution was measured to examine the period-doubling route to chaos in this system. A narrow nozzle was submerged in a mixture of water and glycerin, and nitrogen was supplied to the nozzle at a varying flow rate. The bubbles were detected using a laser and photodiode system; when the bubbles rise through the laser beam, they scatter the light so that the signal at the photodiode decreases. The period between bubbles as well as the duration of each bubble (a function of bubble size and bubble velocity) was determined, and examined as the nitrogen flow rate increased, for solutions with five different concentrations of glycerin. Bubbles were also recorded visually using a high-speed camera. Within the flow rates tested, we observed a bifurcation of the period to period-2 behavior for all solutions tested, and a further bifurcation to period-4 for all solutions except pure glycerin. The solution viscosity affected both the onset of the bifurcation and the precise bubble behavior during the bifurcation. Unusually, a short period/long period pair of bubbles recurring at a regular interval was sometimes observed in the low flow regime which is typically period-1, an observation which requires further investigation. Research supported by NSF DMR 1560093.

  7. Magnetic imaging of a submerged Roman harbour, Caesarea Maritima, Israel

    Science.gov (United States)

    Boyce, J. I.; Reinhardt, E. G.; Raban, A.; Pozza, M. R.

    2003-04-01

    The harbour built by King Herod's engineers at Caesarea represented a major advance in Roman harbour construction that incorporated the use of large (390 m^3), form-filled hydraulic concrete blocks to build an extensive foundation for the harbour moles and breakwater barriers. Marine geophysical surveys were recently conducted across the submerged harbour in an attempt to map the configuration of the buried concrete foundation. A total of 107 line km of high-resolution marine magnetic surveys (nominal 15 m line separations) and bathymetry data were acquired over a 1 km^2 area of the submerged harbour using an Overhauser marine magnetometer, integrated DGPS and single-beam (200 KHz) echosounder. The feasibility of magnetic detection of the concrete was established before the survey by magnetic susceptibility testing of concrete core samples. All concrete samples contained appreciable amounts of fe-oxide-rich volcanic ash ('pozzolana') and showed uniformly high susceptibility values (k > 10^-^4 cgs) when compared to harbour bottom sediments and building stones (k construction of the harbour moles and quays.

  8. THE INFLUENCE OF SUBMERGED MACROPHYTES ON SEDIMENTARY DIATOM ASSEMBLAGES(1).

    Science.gov (United States)

    Vermaire, Jesse C; Prairie, Yves T; Gregory-Eaves, Irene

    2011-12-01

    Submerged macrophytes are a central component of lake ecosystems; however, little is known regarding their long-term response to environmental change. We have examined the potential of diatoms as indicators of past macrophyte biomass. We first sampled periphyton to determine whether habitat was a predictor of diatom assemblage. We then sampled 41 lakes in Quebec, Canada, to evaluate whether whole-lake submerged macrophyte biomass (BiomEpiV) influenced surface sediment diatom assemblages. A multivariate regression tree (MRT) was used to construct a semiquantitative model to reconstruct past macrophyte biomass. We determined that periphytic diatom assemblages on macrophytes were significantly different from those on wood and rocks (ANOSIM R = 0.63, P macrophyte, nutrient-limited lakes (BiomEpiV ≥525 μg · L(-1) ; total phosphorus [TP] macrophyte, nutrient-limited lakes (BiomEpiV eutrophic lakes (TP ≥35 μg · L(-1) ; six lakes). A semiquantitative model correctly predicted the MRT group of the lake 71% of the time (P macrophytes have a significant influence on diatom community structure and that sedimentary diatom assemblages can be used to infer past macrophyte abundance. © 2011 Phycological Society of America.

  9. Wait or escape? Contrasting submergence tolerance strategies of Rorippa amphibia, Rorippa sylvestris and their hybrid

    NARCIS (Netherlands)

    Akman, M.; Bhikharie, A.V.; McLean, E.H.; Boonman, A.; Visser, E.J.W.; Schranz, M.E.; van Tienderen, P.H.

    2012-01-01

    Background and Aims Differential responses of closely related species to submergence can provide insight into the evolution and mechanisms of submergence tolerance. Several traits of two wetland species from habitats with contrasting flooding regimes, Rorippa amphibia and Rorippa sylvestris, as well

  10. Growth rate, protein:RNA ratio and stoichiometric homeostasis of submerged macrophytes under eutrophication stress

    OpenAIRE

    Xing W.; Shi Q.; Liu H.; Liu G.

    2016-01-01

    Growth rate hypothesis (GRH) and stoichiometric homeostasis of photoautotrophs have always been questioned. However, little is known about GRH and stoichiometric homeostasis of aquatic plants, especially submerged macrophytes. Therefore, we aim to test the GRH and explore stoichiometric homeostasis of four freshwater submerged macrophytes under eutrophication stress. At the single species level and the multi-species level, N:P ratios ...

  11. Evidence of shoreline shift on the northern Saurashtra coast: Study based on the submerged temple complex at Pindara

    Digital Repository Service at National Institute of Oceanography (India)

    Gaur, A.S.; Sundaresh

    . It is difficult to assign a particular reason for the submergence of the temple in discussion, however minor sea level rise and seismic activity might have played a vital role in submergence of the temple complex....

  12. Submerged beach ridge lineation and associated sedentary fauna in the innershelf of Gopalpur Coast, Orissa, Bay of Bengal

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, K.M.; Murthy, K.S.R.; Reddy, N.P.C.; Subrahmanyam, A.S.; Lakshminarayana, S.; Rao, M.M.M.; Sarma, K.V.L.N.S.; Premkumar, M.K.; Sree, A.; Bapuji, M.

    . (e - mail: kmrao@kadali.nio.org) RESEARCH COMMUNICATIONS CURRENT SCIENCE, VOL. 81, NO. 7, 10 OCTOBER 2001 829 mic profiling to locate the submerged roc k outcrops. Though the submerged topographic features were r e por - ted by some...

  13. EAARL-B Submerged Topography–Saint Croix, U.S. Virgin Islands, 2014

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — A submerged topography Digital Elevation Model (DEM) mosaic for a portion of the submerged environs of Saint Croix, U.S. Virgin Islands, was produced from remotely...

  14. Wolves trigger a trophic cascade to berries as alternative food for grizzly bears.

    Science.gov (United States)

    Ripple, William J; Beschta, Robert L; Fortin, Jennifer K; Robbins, Charles T

    2015-05-01

    This is a Forum article in response to: Barber-Meyer, S. (2015) Trophic cascades from wolves to grizzly bears or changing abundance of bears and alternate foods? Journal of Animal Ecology, 83, doi: 10.1111/1365-2656.12338. We used multiple data sets and study areas as well as several lines of evidence to investigate potential trophic linkages in Yellowstone National Park. Our results suggest that a trophic cascade from wolves to elk to berry production to berry consumption by grizzly bears may now be underway in the Park. © 2015 The Authors. Journal of Animal Ecology © 2015 British Ecological Society.

  15. The Role of Radial Clearance on the Performance of Foil Air Bearings

    Science.gov (United States)

    Radil, Kevin; Howard, Samuel; Dykas, Brian

    2002-01-01

    Load capacity tests were conducted to determine how radial clearance variations affect the load capacity coefficient of foil air bearings. Two Generation III foil air bearings with the same design but possessing different initial radial clearances were tested at room temperature against an as-ground PS304 coated journal operating at 30,000 rpm. Increases in radial clearance were accomplished by reducing the journal's outside diameter via an in-place grinding system. From each load capacity test the bearing load capacity coefficient was calculated from the rule-of-thumb (ROT) model developed for foil air bearings. The test results indicate that, in terms of the load capacity coefficient, radial clearance has a direct impact on the performance of the foil air bearing. Each test bearing exhibited an optimum radial clearance that resulted in a maximum load capacity coefficient. Relative to this optimum value are two separate operating regimes that are governed by different modes of failure. Bearings operating with radial clearances less than the optimum exhibit load capacity coefficients that are a strong function of radial clearance and are prone to a thermal runaway failure mechanism and bearing seizure. Conversely, a bearing operating with a radial clearance twice the optimum suffered only a 20 percent decline in its maximum load capacity coefficient and did not experience any thermal management problems. However, it is unknown to what degree these changes in radial clearance had on other performance parameters, such as the stiffness and damping properties of the bearings.

  16. Computational analysis of journal bearing operating under lubricant ...

    African Journals Online (AJOL)

    In this paper, the mathematical model developed for relationship between viscosity and temperature for the lubricant SAE 15W40 multi grade engine oil with Al2O3 and ZnO nanoparticles is presented. The developed mathematical model for viscosity and temperature of lubricant containing nanoparticles is used for the ...

  17. On a mathematical model of journal bearing lubrication

    Czech Academy of Sciences Publication Activity Database

    Lanzendörfer, Martin; Stebel, Jan

    2011-01-01

    Roč. 81, č. 11 (2011), s. 2456-2470 ISSN 0378-4754 R&D Projects: GA ČR GA201/09/0917 Grant - others:GA ČR(CZ) GA201/06/0352 Institutional research plan: CEZ:AV0Z10300504; CEZ:AV0Z10190503 Keywords : existence of weak solutions * incompressible non-Newtonian fluids * pressure and shear rate dependent viscosity * inflow/outflow boundary conditions * filtration boundary conditions Subject RIV: BK - Fluid Dynamics Impact factor: 0.738, year: 2011

  18. Elastohydrodynamics Applied to Active Tilting-Pad Journal Bearings

    DEFF Research Database (Denmark)

    Haugaard, Martin Asger; Santos, Ilmar

    2010-01-01

    . The oil film pressure and flow are considered to follow the modified Reynolds equation, which includes the contribution from controllable radial oil injection. The Reynolds equation is solved using a two-dimensional finite element mesh. The rotor is considered to be rigid in terms of shape and size......, but lateral movement is permitted. The servovalve flow is governed by a second order ordinary differential equation, where the right hand side is controlled by an electronic input signal. The constitutive flow-pressure relationship of the injection orifices is that of a fully developed laminar velocity...... profile and the servovalve is introduced into the system of equations by a mass conservation consideration. The Reynolds equation is linearized with respect to displacements and velocities of the nodal degrees of freedom. When all nodal points satisfy static equilibrium, the system of equations...

  19. Entrepreneurial journalism

    NARCIS (Netherlands)

    Andra Leurdijk

    2015-01-01

    Entrepreneurial Journalism is gaining in interest, first in the United States, but now also increasingly in Europe and in the Netherlands. This can be explained by a combination of factors. Firstly, reorganisations and substantial lay-offs in recent years at news publishers, especially of

  20. Journal History

    African Journals Online (AJOL)

    5254. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL · News. OTHER RESOURCES... for Researchers ...

  1. Zede Journal

    African Journals Online (AJOL)

    The main objective of the journal is to publish research articles, findings and discussions on engineering sciences, technology and architecture thereby assisting ... Quality of computerized blast load simulation for non-linear dynamic response analysis of framed structures · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

  2. New journals

    NARCIS (Netherlands)

    NN,

    1977-01-01

    Brunonia is the title of a journal that will replace the Contributions from Herbarium Australiense (last no. 17, 1976). Subscriptions Aust. $ 4. annual, Herbarium Australiense, P.O. Box 1600, Canberra City, A.C.T. 2601, Australia. Nature Malaysiana, published quarterly by Tropical Press, 64A Jl.

  3. THE STUDY ON THE DURABILITY OF SUBMERGED STRUCTURE DISPLACEMENT DUE TO CONCRETE FAILURE

    Directory of Open Access Journals (Sweden)

    M. Mohd

    2016-09-01

    Full Text Available Concrete structures that exposed to marine environments are subjected to multiple deterioration mechanisms. An overview of the existing technology for submerged concrete, pressure resistant, concrete structures which related such as cracks, debonds, and delamination are discussed. Basic knowledge related to drowning durability such as submerged concrete structures in the maritime environment are the durability of a concrete and the ability to resist to weathering, chemical attack, abrasion or other deterioration processes. The measuring techniques and instrumentation for geometrical monitoring of submerged structural displacements have traditionally been categorized into two groups according to the two main groups, namely as geodetic surveying and geotechnical structural measurements of local displacements. This paper aims to study the durability of submerged concrete displacement and harmful effects of submerged concrete structures.

  4. [Effects of light on submerged macrophytes in eutrophic water: research progress].

    Science.gov (United States)

    Li-Sha, Zou; Ze-Yu, Nie; Xiao-Yan, Yao; Ji-Yan, Shi

    2013-07-01

    The restoration of submerged macrophytes is the key to remediate eutrophic water and maintain the health of aquatic ecosystem, while light is the main limiting factor. This paper summarized the factors affecting the light extinction in water and the mechanisms of light intensity affecting the physiology of submerged macrophytes, with the focuses on the metabolic mechanisms of carbon, nitrogen, and phosphorus, the responses of antioxidant enzyme system, and the feedbacks of pigment composition and concentration in the common submerged macrophytes under low light stress. Several engineering techniques applied in the ecological restoration of submerged macrophytes were presented, and the framework of the restoration of submerged macrophytes in eutrophic water was proposed. Some problems in current research and several suggestions on future research were addressed, which could help the related research and engineering practices.

  5. Government Risk-Bearing

    CERN Document Server

    1993-01-01

    The u.s. government bulks large in the nation's financial markets. The huge volume of government-issued and -sponsored debt affects the pricing and volume ofprivate debt and, consequently, resource allocation between competing alternatives. What is often not fully appreciated is the substantial influence the federal government wields overresource allocation through its provisionofcreditandrisk-bearing services to the private economy. Because peopleand firms generally seekto avoid risk, atsomeprice they are willing to pay another party to assume the risk they would otherwise face. Insurance companies are a class of private-sector firms one commonly thinks of as providing these services. As the federal government has expanded its presence in the U.S. economy during this century, it has increasingly developed programs aimed at bearing risks that the private sector either would not take on at any price, or would take on but atapricethoughtto besogreatthatmostpotentialbeneficiarieswouldnotpurchase the coverage. To...

  6. Magnetic translator bearings

    Science.gov (United States)

    Hockney, Richard L. (Inventor); Downer, James R. (Inventor); Eisenhaure, David B. (Inventor); Hawkey, Timothy J. (Inventor); Johnson, Bruce G. (Inventor)

    1990-01-01

    A magnetic bearing system for enabling translational motion includes a carriage and a shaft for movably supporting the carriage; a first magnetic bearing fixed to one of the carriage and shaft and slidably received in a first channel of the other of the carriage and shaft. The first channel is generally U shaped with two side walls and a back wall. The magnetic bearing includes a pair of spaced magnetic pole pieces, each pole piece having a pair of electromagnetic coils mounted on poles on opposite ends of the pole piece proximate the side walls, and a third electromagnetic coil mounted on a pole of the pole piece proximate the backwall; a motion sensor for sensing translational motion along two axes and rotationally about three axes of the carriage and shaft relative to each other; and a correction circuit responsive to the sensor for generating a correction signal to drive the coils to compensate for any misalignment sensed between the carriage and the shaft.

  7. An investigation into the performance of counter rotating floating ring journal under different working conditions.

    OpenAIRE

    Mustafa B. Hunain; Adel A. Alwan; Basim A. Abass

    2007-01-01

    The steady state performance of the counter rotating floating ring Journal bearing is analyzed with isothermal finite bearing theory. The effect of different parameters affecting the performance of the bearing (namely speed ratio, clearance ratio and radii ratio), have been investigated. The load carrying capacity of the bearing increasing with decreasing the radii ratio (R2/R1) of the ring and clearance ratio (c1/c2), in the other hand, the coefficient of friction increases with increasing t...

  8. Leaf gas films contribute to rice (Oryza sativa) submergence tolerance during saline floods

    DEFF Research Database (Denmark)

    Herzog, Max; Konnerup, Dennis; Pedersen, Ole

    2018-01-01

    Floods and salinization of agricultural land adversely impact global rice production. We investigated whether gas films on leaves of submerged rice delay salt entry during saline submergence. Two-week-old plants with leaf gas films (+GF) or with gas films experimentally removed (-GF) were submerg...

  9. Anti-backlash gear bearings

    Science.gov (United States)

    Vranish, John M. (Inventor)

    2009-01-01

    A gear bearing having a first gear and a second gear, each having a plurality of teeth. Each gear operates on two non-parallel surfaces of the opposing gear teeth to perform both gear and bearing functions simultaneously. The gears are moving at substantially the same speed at their contact points. The gears may be roller gear bearings or phase-shifted gear bearings, and may be arranged in a planet/sun system or used as a transmission. One preferred embodiment discloses and describes an anti-backlash feature to counter ''dead zones'' in the gear bearing movement.

  10. Rwanda Journal: About this journal

    African Journals Online (AJOL)

    Policies. » Focus and Scope; » Section Policies; » Peer Review Process; » Publication Frequency; » Open Access Policy; » Editorial and International Advisory Boards; » Language Policy. Submissions. » Author Guidelines; » Copyright Notice; » Privacy Statement. Other. » Journal Sponsorship; » Site Map; » About this ...

  11. Introgressive hybridization: brown bears as vectors for polar bear alleles.

    Science.gov (United States)

    Hailer, Frank

    2015-03-01

    The dynamics and consequences of introgression can inform about numerous evolutionary processes. Biologists have therefore long been interested in hybridization. One challenge, however, lies in the identification of nonadmixed genotypes that can serve as a baseline for accurate quantification of admixture. In this issue of Molecular Ecology, Cahill et al. (2015) analyse a genomic data set of 28 polar bears, eight brown bears and one American black bear. Polar bear alleles are found to be introgressed into brown bears not only near a previously identified admixture zone on the Alaskan Admiralty, Baranof and Chichagof (ABC) Islands, but also far into the North American mainland. Elegantly contrasting admixture levels at autosomal and X chromosomal markers, Cahill and colleagues infer that male-biased dispersal has spread these introgressed alleles away from the Late Pleistocene contact zone. Compared to a previous study on the ABC Island population in which an Alaskan brown bear served as a putatively admixture-free reference, Cahill et al. (2015) utilize a newly sequenced Swedish brown bear as admixture baseline. This approach reveals that brown bears have been impacted by introgression from polar bears to a larger extent (up to 8.8% of their genome), than previously known, including the bear that had previously served as admixture baseline. No evidence for introgression of brown bear into polar bear is found, which the authors argue could be a consequence of selection. Besides adding new exciting pieces to the puzzle of polar/brown bear evolutionary history, the study by Cahill and colleagues highlights that wildlife genomics is moving from analysing single genomes towards a landscape genomics approach. © 2015 John Wiley & Sons Ltd.

  12. Critical Assessment of Temperature Distribution in Submerged Arc Welding Process

    Directory of Open Access Journals (Sweden)

    Vineet Negi

    2013-01-01

    Full Text Available Temperature distribution during any welding process holds the key for understanding and predicting several important welding attributes like heat affected zone, microstructure of the weld, residual stress, and distortion during welding. The accuracy of the analytical approaches for modeling temperature distribution during welding has been constrained by oversimplified assumptions regarding boundary conditions and material properties. In this paper, an attempt has been made to model the temperature distribution during submerged arc welding process using finite element modeling technique implemented in ANSYS v12. In the present analysis, heat source is assumed to be double-ellipsoidal with Gaussian volumetric heat generation. Furthermore, variation of material properties with temperature and both convective and radiant heat loss boundary condition have been considered. The predicted temperature distribution is then validated against the experimental results obtained by thermal imaging of the welded plate, and they are found to be in a good agreement.

  13. Arc characteristics of submerged arc welding with stainless steel wire

    Science.gov (United States)

    Li, Ke; Wu, Zhi-sheng; Liu, Cui-rong; Chen, Feng-hua

    2014-08-01

    The arc characteristics of submerged arc welding (SAW) with stainless steel wire were studied by using Analysator Hannover (AH). The tests were carried out under the same preset arc voltage combined with different welding currents. By comparing the probability density distribution (PDD) curves of arc voltage and welding current, the changes were analyzed, the metal transfer mode in SAW was deduced, and the characteristics of a stable arc were summarized. The analysis results show that, with an increase of welding parameters, the short-circuiting peak in the PDD curves of arc voltage decreases gradually until it disappears, and the dominant metal transfer mode changes from flux-wall guided transfer to projected transfer and then to streaming transfer. Moreover, when the PDD curves of arc voltage are both unimodal and generally symmetrical, the greater the peak probability and the smaller the peak span, the more stable the arc becomes.

  14. Numerical study on tsunami hazard mitigation using a submerged breakwater.

    Science.gov (United States)

    Ha, Taemin; Yoo, Jeseon; Han, Sejong; Cho, Yong-Sik

    2014-01-01

    Most coastal structures have been built in surf zones to protect coastal areas. In general, the transformation of waves in the surf zone is quite complicated and numerous hazards to coastal communities may be associated with such phenomena. Therefore, the behavior of waves in the surf zone should be carefully analyzed and predicted. Furthermore, an accurate analysis of deformed waves around coastal structures is directly related to the construction of economically sound and safe coastal structures because wave height plays an important role in determining the weight and shape of a levee body or armoring material. In this study, a numerical model using a large eddy simulation is employed to predict the runup heights of nonlinear waves that passed a submerged structure in the surf zone. Reduced runup heights are also predicted, and their characteristics in terms of wave reflection, transmission, and dissipation coefficients are investigated.

  15. Numerical Study on Tsunami Hazard Mitigation Using a Submerged Breakwater

    Directory of Open Access Journals (Sweden)

    Taemin Ha

    2014-01-01

    Full Text Available Most coastal structures have been built in surf zones to protect coastal areas. In general, the transformation of waves in the surf zone is quite complicated and numerous hazards to coastal communities may be associated with such phenomena. Therefore, the behavior of waves in the surf zone should be carefully analyzed and predicted. Furthermore, an accurate analysis of deformed waves around coastal structures is directly related to the construction of economically sound and safe coastal structures because wave height plays an important role in determining the weight and shape of a levee body or armoring material. In this study, a numerical model using a large eddy simulation is employed to predict the runup heights of nonlinear waves that passed a submerged structure in the surf zone. Reduced runup heights are also predicted, and their characteristics in terms of wave reflection, transmission, and dissipation coefficients are investigated.

  16. Phytoremediation of arsenic in submerged soil by wetland plants.

    Science.gov (United States)

    Jomjun, Nateewattana; Siripen, Trichaiyaporn; Maliwan, Saeouy; Jintapat, Nateewattana; Prasak, Thavornyutikarn; Somporn, Choonluchanon; Petch, Pengchai

    2011-01-01

    Wetland aquatic plants including Canna glauca L., Colocasia esculenta L. Schott, Cyperus papyrus L. and Typha angustifolia L. were used in the phytoremediation of submerged soil polluted by arsenic (As). Cyperus papyrus L. was noticed as the largest biomass producer which has arsenic accumulation capacity of 130-172 mg As/kg plant. In terms of arsenic removal rate, however, Colocasia esculenta L. was recognized as the largest and fastest arsenic remover in this study. Its arsenic removal rate was 68 mg As/m2/day while those rates of Canna glauca L., Cyperus papyrus L. and Typha angustifolia L. were 61 mg As/m2/day, 56 mg As/m2/day, and 56 mg As/m2/day, respectively. Although the 4 aquatic plants were inferior in arsenic accumulation, their high arsenic removal rates were observed. Phytostabilization should be probable for the application of these plants.

  17. Minimizing downstream scour due to submerged hydraulic jump using corrugated

    Directory of Open Access Journals (Sweden)

    Hossam Mohamed Ali

    2014-12-01

    Full Text Available Local scour downstream of hydraulic structures due to hydraulic jump is considered one of the tedious and complicated problems facing their stability. Throughout this paper, an experimental study was conducted to study the effect of using different spaced corrugated aprons on the downstream local scour due to submerged jump. Sixty runs were carried out in a horizontal rectangular flume to determine the optimal corrugation wavelength which minimizing the scour. A case of flat apron included to estimate the influence of corrugated aprons on scour holes dimensions. Two types of non-cohesive soil were used. Experiments were performed for a range of Froude numbers between 1.68 and 9.29. The results showed that using spaced triangular corrugated aprons minimize the scour depth and length of fine sand by average percentage of 63.4% and 30.2%, respectively and for coarse sand by 44.2% and 20.6% in comparing with classical jump.

  18. Microbial production of four biodegradable siderophores under submerged fermentation.

    Science.gov (United States)

    Fazary, Ahmed E; Al-Shihri, Ayed S; Alfaifi, Mohammad Y; Saleh, Kamel A; Alshehri, Mohammed A; Elbehairi, Serag Eldin I; Ju, Yi-Hsu

    2016-07-01

    Four siderophore analogues were isolated and purified from Escherichia coli, Bacillus spp. ST13, and Streptomyces pilosus microorganisms under some specific submerged fermentation conditions. In order to evaluate the highest production of this siderophore analogues through the growth, a rapid spectrophotometric screening semi-quantitative method was used, in which interestingly the analogues were isolated in its own form not its iron chelate. After chromatographic separation, the chemical structures of the isolated and purified siderophores were illustrated using detailed spectroscopic techniques. The biodegradation studies were done on that four novel isolated and purified siderophores following OECD protocols. In addition, the bioactivities of these siderophores and their iron complexes were examined and evaluated. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Development of Submerged Entry Nozzles that Resist Clogging

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Jeffrey D. Smith; Kent D. Peasle

    2002-10-14

    Accretion formation and the associated clogging of SENs is a major problem for the steel industry leading to decreased strand speed, premature changing of SENs or strand termination and the associated reductions in productivity, consistency, and steel quality. A program to evaluate potentially clog resistance materials was initiated at the University of Missouri-Rolla. The main objective of the research effort was to identify combinations of steelmaking and refractory practices that would yield improved accretion resistance for tundish nozzles and submerged entry nozzles. A number of tasks were identified during the initial kick-off meeting and each was completed with two exceptions, the thermal shock validation and the industrial trials. Not completing these two tasks related to not having access to industrial scale production facilities. Though much of the results and information generated in the project is of proprietary nature.

  20. Slag-metal equilibrium during submerged arc welding

    Science.gov (United States)

    Chai, C. S.; Eagar, T. W.

    1981-09-01

    A thermodynamic model of the equilibria existing between the slag and the weld metal during submerged arc welding is presented. As formulated, the model applies only to fused neutral fluxes containing less than 20 pct CaF2, however some results indicate that the model may be useful in more general cases as well. The model is shown to be capable of predicting the gain or loss of both Mn and Si over a wide range of baseplate, electrode and flux compositions. At large deviations from the predicted equilibrium, the experimental results indicate considerable variability in the amount of Mn or Si transferred between the slag and metal phases, while closer to the calculated equilibrium, the extent of metal transfer becomes more predictable. The variability in metal transfer rate at large deviations from equilibrium may be explained by variations between the bulk and the surface concentrations of Mn and Si in both metal and slag phases.

  1. Endodontic Treatment in Submerged Roots: A Case Report

    Directory of Open Access Journals (Sweden)

    Hemalatha Pameshwar Hiremath

    2010-06-01

    Full Text Available Alveolar ridge resorption has long been considered an unavoidable consequence of tooth extraction. While the extent and pattern of resorption is variable among individuals, there is a progressive loss of ridge contour as a result of physiologic bone remodeling. Even today, with best modalities of tooth preservation, there is a group of elderly individuals who do not benefit from modern preventive practices and who now present a dilemma in terms of maintaining the masticatory apparatus necessary for nutrition. Even with excellent dental care, such patients experience abrasion of the natural tooth crowns with age, and embedded roots are left within the alveolar bone. According to old concepts of dental care, extraction of these roots would have been recommended, but today’s goal of excellence in endodontics dictates otherwise. We report a case in which vital and non-vital root submergence was carried out to prevent alveolar ridge reduction.

  2. From Journals

    Directory of Open Access Journals (Sweden)

    Nedjeljko Frančula

    2013-06-01

    Full Text Available From the field of cartography and geoinformation, there are journal’s article extracts given which are not cartographic first and whose complete texts are on the Internet, accessible to the members of Croatian academic and research community. Most journals can be accessed through the PERO browser (http://knjiznica.irb.hr/pero/index.php. For the journals not found through this browser, the complete texts of the mentioned articles are available for free on the given web-address. Next to every jo­urnal headline, in the brackets, it is noted which prominent bibliographic and quotation bases it is placed in: CC (Current Contents, SCIE (Science Citati­­on Index Expanded, and SSCI (Social Sc­­­i­ence Citation Index. It should be noted that, for some journals accessible through PERO browser, there is a delay of 6, 12 and even 18 months in accessing the newest issues. This number is given in the brackets next to the journal’s headline.Bullettin of the GSI (Geospatial Information Authority of Japanhttp://www.gsi.go.jp/ENGLISH/page_e30092.htmlK. Kawase: A general formula for calculating meridian arc length and its application to coordinate conversion in the Gauss-Krüger projection, Vol. 59, December 2011.K. Kawase: Concise derivation of extensive coordinate conversion formulae in the Gauss-Krüger pro­jection, Vol. 60, December 2012.Coordinates (A monthly magazine on positioning, navigation and beyond http://mycoordinates.orgT. Nagayama, K. Inaba, T. Hayashi, H: Nakai: Responding to the great east Japan earthquake, 2012, 12.J. SF Fabic: Data integration and sharing for disaster management, 2012, 12.D. Ampatzidis: Datum transformations using exclusively geodetic curvilinear coordinates without height information, 2012, 12.Geomatics and Environmental Engineeringhttp://journals.bg.agh.edu.pl/GEOMATICS/index.phpR. Cellmer, A. Senetra, A. Szczepanska: Land value maps of naturally valuable areas, 2012, 3.Geopolitics (CC, SSCI (12J. Strandsbjerg

  3. Selections from international journals | Heshmat | Egyptian Journal ...

    African Journals Online (AJOL)

    Egyptian Journal of Pediatric Allergy and Immunology (The). Journal Home · ABOUT · Advanced Search · Current Issue · Archives · Journal Home > Vol 12, No 2 (2014) >. Log in or Register to get access to full text downloads.

  4. Development of New Submergence Tolerant Rice Variety for Bangladesh Using Marker-Assisted Backcrossing

    Directory of Open Access Journals (Sweden)

    Khandakar Md Iftekharuddaula

    2015-01-01

    Full Text Available Submergence tolerant high yielding rice variety was developed using BR11 as a recipient parent applying foreground, phenotypic and background selection approaches. Recombinant selection was found essential to minimize linkage drag by BC2F2 generation. Without recombinant selection, the introgression size in the backcross recombinant lines (BRLs was approximately 15 Mb on the carrier chromosome. The BRLs were found submergence tolerance compared to the check varieties under complete submergence for two weeks at Bangladesh Rice Research Institute, and produced higher yield compared to the isogenic Sub1-line under controlled submerged condition. The BRL IR85260-66-654-Gaz2 was released as BRRI dhan52 in 2010, which was the first high yielding submergence tolerant variety in Bangladesh. BRRI dhan52 produced grain yield ranging from 4.2 to 5.2 t/hm2 under different flash flood prone areas of Bangladesh in three consecutive seasons. The study demonstrated the efficiency of recombinant selection and better adaptability of the newly released submergence tolerant high yielding variety in flash flood prone different areas of the country with respect to submergence tolerance and yield potential.

  5. Physiological and transcriptomic characterization of submergence and reoxygenation responses in soybean seedlings.

    Science.gov (United States)

    Tamang, Bishal G; Magliozzi, Joseph O; Maroof, M A Saghai; Fukao, Takeshi

    2014-10-01

    Complete inundation at the early seedling stage is a common environmental constraint for soybean production throughout the world. As floodwaters subside, submerged seedlings are subsequently exposed to reoxygenation stress in the natural progression of a flood event. Here, we characterized the fundamental acclimation responses to submergence and reoxygenation in soybean at the seedling establishment stage. Approximately 90% of seedlings succumbed during 3 d of inundation under constant darkness, whereas 10 d of submergence were lethal to over 90% of seedlings under 12 h light/12 h dark cycles, indicating the significance of underwater photosynthesis in seedling survival. Submergence rapidly decreased the abundance of carbohydrate reserves and ATP in aerial tissue of seedlings although chlorophyll breakdown was not observed. The carbohydrate and ATP contents were recovered upon de-submergence, but sudden exposure to oxygen also induced lipid peroxidation, confirming that reoxygenation induced oxidative stress. Whole transcriptome analysis recognized genome-scale reconfiguration of gene expression that regulates various signalling and metabolic pathways under submergence and reoxygenation. Comparative analysis of differentially regulated genes in shoots and roots of soybean and other plants defines conserved, organ-specific and species-specific adjustments which enhance adaptability to submergence and reoxygenation through different metabolic pathways. © 2014 John Wiley & Sons Ltd.

  6. Submergence induced changes of molecular species in membrane lipids in Arabidopsis thaliana

    Directory of Open Access Journals (Sweden)

    Mulan Wang

    2016-06-01

    Full Text Available The composition of membrane lipids is sensitive to environmental stresses. Submergence is a type of stress often encountered by plants. However, how the molecular species of membrane lipids respond to submergence has not yet been characterised. In this study, we used a lipidomic approach to profile the molecular species of membrane lipids in whole plants of Arabidopsis thaliana that were completely submerged for three days. The plants survived one day of submergence, after which, we found that the total membrane lipids were only subtly decreased, showing significant decreases of monogalactosyldiacylglycerol (MGDG and phosphatidylcholine (PC and an increase of phosphatidic acid (PA; however, the basic lipid composition was retained. In contrast, three days of submergence caused plants to die, and the membranes deteriorated via the rapid loss of 96% of lipid content together with a 229% increase in PA. The turnover of molecular species from PG and MGDG to PA indicated that submergence-induced lipid changes occurred through PA-mediated degradation. In addition, molecular species of extraplastidic PG degraded sooner than plastidic ones, lyso-phospholipids exhibited various patterns of change, and the double-bond index (DBI remained unchanged until membrane deterioration. Our results revealed the unique changes of membrane lipids upon submergence and suggested that the major cause of the massive lipid degradation could be anoxia.

  7. The Performance and Fouling Control of Submerged Hollow Fiber (HF Systems: A Review

    Directory of Open Access Journals (Sweden)

    Ebrahim Akhondi

    2017-07-01

    Full Text Available The submerged membrane filtration concept is well-established for low-pressure microfiltration (MF and ultrafiltration (UF applications in the water industry, and has become a mainstream technology for surface-water treatment, pretreatment prior to reverse osmosis (RO, and membrane bioreactors (MBRs. Compared to submerged flat sheet (FS membranes, submerged hollow fiber (HF membranes are more common due to their advantages of higher packing density, the ability to induce movement by mechanisms such as bubbling, and the feasibility of backwashing. In view of the importance of submerged HF processes, this review aims to provide a comprehensive landscape of the current state-of-the-art systems, to serve as a guide for further improvements in submerged HF membranes and their applications. The topics covered include recent developments in submerged hollow fiber membrane systems, the challenges and developments in fouling-control methods, and treatment protocols for membrane permeability recovery. The highlighted research opportunities include optimizing the various means to manipulate the hydrodynamics for fouling mitigation, developing online monitoring devices, and extending the submerged HF concept beyond filtration.

  8. Aerospace applications of magnetic bearings

    Science.gov (United States)

    Downer, James; Goldie, James; Gondhalekar, Vijay; Hockney, Richard

    1994-05-01

    Magnetic bearings have traditionally been considered for use in aerospace applications only where performance advantages have been the primary, if not only, consideration. Conventional wisdom has been that magnetic bearings have certain performance advantages which must be traded off against increased weight, volume, electric power consumption, and system complexity. These perceptions have hampered the use of magnetic bearings in many aerospace applications because weight, volume, and power are almost always primary considerations. This paper will review progress on several active aerospace magnetic bearings programs at SatCon Technology Corporation. The magnetic bearing programs at SatCon cover a broad spectrum of applications including: a magnetically-suspended spacecraft integrated power and attitude control system (IPACS), a magnetically-suspended momentum wheel, magnetic bearings for the gas generator rotor of a turboshaft engine, a vibration-attenuating magnetic bearing system for an airborne telescope, and magnetic bearings for the compressor of a space-rated heat pump system. The emphasis of these programs is to develop magnetic bearing technologies to the point where magnetic bearings can be truly useful, reliable, and well tested components for the aerospace community.

  9. Analysis of foil bearings for high speed operation in cryogenic applications

    Science.gov (United States)

    Carpino, Marc

    1991-01-01

    The general objective of this project is to develop analysis tools which are required for the design of foil bearings to be used in cryogenic applications. During the second year of this project, a general analysis approach and code for journal bearings operating under steady state conditions will be completed. This will be followed by the initiation of an investigation into transient behavior of foil bearings to determine their performance in rotor systems. Foil bearings have been proposed as an alternative to rolling element bearings for use in cryogenic turbopumps in liquid propellant rocket engines. This type of bearing offers several advantages over rolling element bearings since they would use the cryogenic pump fluid for a lubricant and have structural flexibility. These bearings have the potential of high reliability and long life. The bearing surface is constructed of a 'foil' which resists deflection by a combination of bending, membrane, and elastic foundation effects. The relative motion between the rotating shaft and the foil causes pressure in the fluid film to develop. This pressure deflects the the foil surface away from the shaft. Once a full fluid film is established between the foil and the rotor shaft, contact no longer takes place and there is no subsequent wear of the surfaces. The flexible foil structure of the bearing allows it to compensate for minor tolerance and manufacturing defects. This same flexibility also has a significant effect on the dynamic performance of the rotor-bearing system.

  10. African Journals Online (AJOL)

    African Journals Online (AJOL)

    reviewed, African-published scholarly journals. Historically, scholarly ... Featured Country: Nigeria, Featured Journal: Journal of Modeling, Design and Management of Engineering Systems ... Nigeria Journal of Pure and Applied Physics. Vol 5, No 2 ...

  11. African Journals Online (AJOL)

    African Journals Online (AJOL)

    reviewed, African-published scholarly journals. ... Featured Country: Nigeria, Featured Journal: Journal of Research in Forestry, Wildlife and Environment. Most recent issues on AJOL: Vol 6, No 1 (2015). Nigeria Journal of Pure and Applied Physics.

  12. African Journals Online (AJOL)

    African Journals Online (AJOL)

    reviewed, African-published scholarly journals. Historically, scholarly ... Featured Country: Nigeria, Featured Journal: International Journal of Development and Management Review ... Nigeria Journal of Pure and Applied Physics. Vol 5, No 2 (2017).

  13. African Journals Online (AJOL)

    African Journals Online (AJOL)

    reviewed, African-published scholarly journals. Historically ... Featured Country: Tanzania, Featured Journal: University of Dar es Salaam Library Journal. Most recent issues on AJOL: Vol 6, No 1 (2015). Nigeria Journal of Pure and Applied Physics.

  14. African Journals Online (AJOL)

    African Journals Online (AJOL)

    reviewed, African-published scholarly journals. ... Featured Country: Kenya, Featured Journal: Journal of Tropical Microbiology and Biotechnology. Most recent issues on AJOL: Vol 6, No 1 (2015). Nigeria Journal of Pure and Applied Physics.

  15. African Journals Online (AJOL)

    African Journals Online (AJOL)

    reviewed, African-published scholarly journals. ... Featured Country: Nigeria, Featured Journal: West African Journal of Industrial and Academic Research. Most recent issues on AJOL: Vol 6, No 1 (2015). Nigeria Journal of Pure and Applied Physics.

  16. African Journals Online (AJOL)

    African Journals Online (AJOL)

    reviewed, African-published scholarly journals. Historically ... Featured Country: South Africa, Featured Journal: African Journal of Cross-Cultural Psychology and Sport Facilitation ... International Journal of Biological and Chemical Sciences.

  17. African Journals Online (AJOL)

    African Journals Online (AJOL)

    reviewed, African-published scholarly journals. Historically, scholarly ... Featured Country: Nigeria, Featured Journal: International Journal of Community Research ... Vol 8, No 2 (2017): Journal of Language, Technology & Entrepreneurship in Africa.

  18. African Journals Online (AJOL)

    African Journals Online (AJOL)

    reviewed, African-published scholarly journals. ... Featured Country: Ethiopia, Featured Journal: AFRREV IJAH: An International Journal of Arts and Humanities ... Vol 8, No 2 (2017): Journal of Language, Technology & Entrepreneurship in Africa.

  19. African Journals Online (AJOL)

    African Journals Online (AJOL)

    reviewed, African-published scholarly journals. ... Featured Country: Nigeria, Featured Journal: International Journal of Tropical Agriculture and Food Systems ... Vol 8, No 2 (2017): Journal of Language, Technology & Entrepreneurship in Africa.

  20. African Journals Online (AJOL)

    African Journals Online (AJOL)

    reviewed, African-published scholarly journals. ... Featured Country: Ghana, Featured Journal: International Journal of Pedagogy, Policy and ICT in Education ... Vol 8, No 2 (2017): Journal of Language, Technology & Entrepreneurship in Africa.

  1. A torque-based method for the study of roller bearing degradation under poor lubrication conditions in a lead–bismuth environment

    Energy Technology Data Exchange (ETDEWEB)

    Jezic von Gesseneck, J., E-mail: josip.jezic.von.gesseneck@vub.ac.be [Vrije Universiteit Brussel, Department of Mechanical Engineering, Pleinlaan 2, 1050 Brussels (Belgium); SCK-CEN, Advanced Nuclear Systems, Boeretang 200, 2900 Mol (Belgium); Caers, B. [SCK-CEN, Advanced Nuclear Systems, Boeretang 200, 2900 Mol (Belgium); Van Overmeire, M.; Lefeber, D.; Vanderborght, B. [Vrije Universiteit Brussel, Department of Mechanical Engineering, Pleinlaan 2, 1050 Brussels (Belgium); Schuurmans, P. [SCK-CEN, Advanced Nuclear Systems, Boeretang 200, 2900 Mol (Belgium)

    2016-08-15

    Highlights: • An original study of roller bearings in lead–bismuth. • Bearing friction torque history improves post-test diagnosis. • Torque signal provides complementary information in different domains. • There is a basis for live condition monitoring with additional research. - Abstract: The bearing is a critical and complex component of the in-vessel fuel manipulator in the future MYRRHA nuclear research reactor. All components are fully submerged in the LBE (lead–bismuth eutectic) primary coolant. LBE poses various challenges to bearing operation however. In addition to material attacks, it is a poor lubricant. The effects on the bearing are examined with extensive screening tests in LBE. The most widely implemented bearing monitoring sensor, the accelerometer, is not sufficiently reliable in this hostile environment. This paper outlines a torque-based method for remote monitoring radially-loaded deep-groove ball bearings in LBE. Challenges to existing torque models posed by inadequate lubrication are discussed. The parameters of the bearing torque most representative of the bearing condition are identified in both the time and frequency domains. These are correlated with the micro-analyses of selected test cases towards the validation of a diagnosis method for bearing degradation in LBE.

  2. Interaction of Submerged Breakwater by a Solitary Wave Using WC-SPH Method

    Directory of Open Access Journals (Sweden)

    Afshin Mansouri

    2014-01-01

    Full Text Available Interaction of a solitary wave and submerged breakwater is studied in a meshless, Lagrangian approach. For this purpose, a two-dimensional smoothed particle hydrodynamics (SPH code is developed. Furthermore, an extensive set of simulations is conducted. In the first step, the generated solitary wave is validated. Subsequently, the interaction of solitary wave and submerged breakwater is investigated thoroughly. Results of the interaction of solitary wave and a submerged breakwater are also shown to be in good agreement with published experimental studies. Afterwards, the effects of the inclination and length of breakwater as well as distance between two breakwaters are evaluated on damping ratio of breakwater.

  3. Oxygen dynamics during submergence in the halophytic stem succulent Halosarcia pergranulata

    DEFF Research Database (Denmark)

    Pedersen, Ole; Vos, Harrie; Colmer, Timothy David

    2006-01-01

    This study elucidated O2 dynamics in shoots and roots of submerged Halosarcia pergranulata (Salicornioideae), a perennial halophytic stem succulent that grows on flood-prone mudflats of salt lakes. Oxygen within shoots and roots was measured using microelectrodes, for plants when waterlogged...... the roots, at least during the first several hours (the time period measured) after submergence or when light periods followed darkness. The influence of light on tissue O2 dynamics was confirmed in an experiment on a submerged plant in a salt lake in south-western Australia. In the late afternoon, partial...

  4. Computational design of rolling bearings

    CERN Document Server

    Nguyen-Schäfer, Hung

    2016-01-01

    This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.

  5. Archives: Malawi Medical Journal

    African Journals Online (AJOL)

    Items 1 - 50 of 71 ... Malawi Medical Journal. ... PROMOTING ACCESS TO AFRICAN RESEARCH. AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES. Archives: Malawi Medical Journal. Journal Home > Archives: Malawi Medical Journal. Log in or Register to get access to full ...

  6. Archives: Ghana Medical Journal

    African Journals Online (AJOL)

    Items 1 - 45 of 45 ... Ghana Medical Journal. ... PROMOTING ACCESS TO AFRICAN RESEARCH. AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES. Archives: Ghana Medical Journal. Journal Home > Archives: Ghana Medical Journal. Log in or Register to get access to full text ...

  7. African Journals Online (AJOL)

    African Journals Online (AJOL)

    SAHARA-J: Journal of Social Aspects of HIV/AIDS. Vol 108, No 2 (2018). South African Medical Journal. Vol 10, No 4 (2017). South Sudan Medical Journal. Vol 108, No 1 (2018). South African Medical Journal. Vol 51, No 4 (2017). Ghana Medical Journal. Vol 22, No 1 (2018). Journal of Applied Sciences and Environmental ...

  8. African Journals Online (AJOL)

    African Journals Online (AJOL)

    ChemSearch Journal. Vol 48, No 3 (2018). South African Journal of Animal Science. Vol 8, No 1 (2018). African Journal of Chemical Education. Vol 48, No 2 (2018). South African Journal of Animal Science. Vol 48, No 1 (2018). South African Journal of Animal Science. Vol 7, No 1 (2018). South African Journal of Geomatics.

  9. Effects of submergence on growth and survival of saplings of three wetland trees differing in adaptive mechanisms for flood tolerance

    Directory of Open Access Journals (Sweden)

    Fumiko Iwanaga

    2015-04-01

    Full Text Available Aim of study: Withstanding total submergence and reaeration following submergence is essential for the survival and establishment of wetland species. We focused on “LOES–low oxygen escape syndrome” and “LOQS–low oxygen quiescence syndrome” and compared tolerances to total submergence among wetland woody species differing in morphological adaptation to soil flooding. Area of study, materials and methods: This study examined the survival of 2-year-old saplings of Taxodium distichum and Metasequioia glyptostroboides (LOQS species, and Alnus japonica (LOES species, during and after total submergence. Saplings were completely submerged, then de-submerged to determine trends in survival and growth Main results: The M. glyptostroboides and A. japonica saplings could not survive prolonged submergence for more than 8 weeks, whereas saplings of T. distichum survived for over 2 years. Submerged saplings of all species showed no significant growth or modifications in morphology and anatomy under water, such as shoot elongation, adventitious root formation, and/or aerenchyma development. All T. distichum saplings that were de-submerged in the second year had the same pattern of shoot growth regardless of differences in timing and seasonality of de-submergence. Wood formation in T. distichum saplings ceased during submergence and resumed after de-submergence in spring and summer, but not in autumn. Research highlights: T. distichum saplings, which survived longer submergence periods than A. japonica and M. glyptostroboides, had physiological characteristics, such as suspension of growth and metabolism, which allowed survival of protracted total submergence (at least 2 years when saplings were immersed during the dormant stage before leaf flushing.

  10. Grease lubrication in rolling bearings

    CERN Document Server

    Lugt, Piet M

    2012-01-01

    The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal

  11. Hydrostatic and hybrid bearing design

    CERN Document Server

    Rowe, W B

    1983-01-01

    Hydrostatic and Hybrid Bearing Design is a 15-chapter book that focuses on the bearing design and testing. This book first describes the application of hydrostatic bearings, as well as the device pressure, flow, force, power, and temperature. Subsequent chapters discuss the load and flow rate of thrust pads; circuit design, flow control, load, and stiffness; and the basis of the design procedures and selection of tolerances. The specific types of bearings, their design, dynamics, and experimental methods and testing are also shown. This book will be very valuable to students of engineering des

  12. Good journalism or peace journalism?

    Directory of Open Access Journals (Sweden)

    David Loyn

    2007-10-01

    Full Text Available This paper argues against the prescriptive notions of Peace Journalism, and in particular its exclusive nature and attempt to define itself as a new orthodoxy. Most of the paper is a critique of the work of Jake Lynch and Annabel McGoldrick, in a book published in 2005, as well as their earlier Reporting the World series. They condemn all other ways of reporting as 'War Journalism, biased in favour of war.' I argue instead that the opposite of Peace Journalism is good journalism. Much of this Peace Journalism argument is derived from the work of Johan Galtung, who accuses 'war journalists' of reporting war in an enclosed space and time, with no context, concealing peace initiatives and making wars 'opaque/secret.' Galtung specifically calls on journalists as part of their mission to search out peace proposals which might begin as something small and beneath notice, but which might then be picked up and owned by politicians as their own. My response is clear and simple: creating peacemaking politicians is not the business of a reporter. I examine the traditional journalistic methods of using objectivity to get at a version of the truth. I concede that perfect truth is unattainable, (and paradoxically the tool of objectivity we use to get there is slippery too. I conclude that a more quotidian truth, or 'truthfulness' is though a manageable goal. I engage with philosophers who examine objectivity, concluding with the assistance of Thomas Nagel that it does still have a value. Nagel's account also has the merit of explaining how practices such as peace-reporting are bound to be less objective than alternatives, 'since they commit themselves to the adoption of particular perspectives, in effect giving up on the ideal of stripping away as much…as possible.' I examine the responses of the so-called 'journalism of attachment' framed as a desire of journalists faced by the horrors of Bosnia to cast off impartiality and emotional detachment and take

  13. The Rolling Bearing Fault Feature Extraction Based on the LMD and Envelope Demodulation

    Directory of Open Access Journals (Sweden)

    Jun Ma

    2015-01-01

    Full Text Available Since the working process of rolling bearings is a complex and nonstationary dynamic process, the common time and frequency characteristics of vibration signals are submerged in the noise. Thus, it is the key of fault diagnosis to extract the fault feature from vibration signal. Therefore, a fault feature extraction method for the rolling bearing based on the local mean decomposition (LMD and envelope demodulation is proposed. Firstly, decompose the original vibration signal by LMD to get a series of production functions (PFs. Then dispose the envelope demodulation analysis on PF component. Finally, perform Fourier Transform on the demodulation signals and judge failure condition according to the dominant frequency of the spectrum. The results show that the proposed method can correctly extract the fault characteristics to diagnose faults.

  14. Outer Continental Shelf Submerged Lands Act Boundary - Atlantic Region NAD83

    Data.gov (United States)

    Bureau of Ocean Energy Management, Department of the Interior — This data set contains the Submerged Lands Act (SLA) boundary line (also known as State Seaward Boundary (SSB), or Fed State Boundary) in ESRI shapefile formats for...

  15. The Development of a Composite Consumable Insert for Submerged ARC Welding

    National Research Council Canada - National Science Library

    1980-01-01

    .... When the submerged arc process was utilized to weld the butt joint in large flat plate structures, the repositioning of the plate for welding of the reverse side was a costly time consuming procedure...

  16. Meta Modelling of Submerged-Arc Welding Design based on Fuzzy Algorithm

    Science.gov (United States)

    Song, Chang-Yong; Park, Jonghwan; Goh, Dugab; Park, Woo-Chang; Lee, Chang-Ha; Kim, Mun Yong; Kang, Jinseo

    2017-12-01

    Fuzzy algorithm based meta-model is proposed for approximating submerged-arc weld design factors such as weld speed and weld output. Orthogonal array design based on the submerged-arc weld numerical analysis is applied to the proposed approach. The nonlinear finite element analysis is carried out to simulate the submerged-arc weld numerical analysis using thermo-mechanical and temperature-dependent material properties for general mild steel. The proposed meta-model based on fuzzy algorithm design is generated with triangle membership functions and fuzzy if-then rules using training data obtained from the Taguchi orthogonal array design data. The aim of proposed approach is to develop a fuzzy meta-model to effectively approximate the optimized submerged-arc weld factors. To validate the meta-model, the results obtained from the fuzzy meta-model are compared to the best cases from the Taguchi orthogonal array.

  17. Large-Scale Submerged Aquatic Vegetation Restoration in Chesapeake Bay: Status Report, 2003-2006

    National Research Council Canada - National Science Library

    Shafer, Deborah J; Bergstrom, Peter

    2008-01-01

    In 2003, the U.S. Army Engineer Research and Development Center (ERDC) and the National Oceanic and Atmospheric Administration Chesapeake Bay Office began a comprehensive research effort to restore submerged aquatic vegetation (SAV...

  18. Flow Velocity and Morphology of a Submerged Patch of the Aquatic Species

    NARCIS (Netherlands)

    Cornacchia, L.; Licci, S.; van de Koppel, J.; van der Wal, D.; Wharton, G.; Puijalon, S.; Bouma, T.J.

    2016-01-01

    The interaction between macrophytes and hydrodynamic conditions is animportant feature in many aquatic ecosystems. Submerged macrophytes can formmonospecific patches that interact with the flow and alter current velocity; withinthe same vegetation patch, plants are exposed to different levels of

  19. Uncalibrated EAARL-B Submerged Topography--Fort Lauderdale, Florida, 2014 (GEOID12A)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Binary point-cloud data of a portion of the submerged environs of Fort Lauderdale, Florida, were produced from remotely sensed, geographically referenced elevation...

  20. EAARL-B Submerged Topography - Saint Croix, U.S. Virgin Islands, 2014

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — ASCII XYZ point cloud data for a portion of the submerged environs of Saint Croix, U.S. Virgin Islands, was produced from remotely sensed, geographically referenced...

  1. EAARL-B Submerged Topography—Crocker Reef, Florida, 2014

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — ASCII XYZ point cloud data for a portion of the submerged environs of Crocker Reef, Florida, were produced from remotely sensed, geographically referenced elevation...

  2. Calibrated EAARL-B Submerged Topography--Fort Lauderdale, Florida, 2014 (GEOID12A)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Binary point-cloud data of a portion of the submerged environs of Fort Lauderdale, Florida, were produced from remotely sensed, geographically referenced elevation...

  3. Environmental Assessment: Submerged Aquatic Plant Management of Banks Lake, Banks Lake NWR, Lakeland, Georgia

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This Environmental Assessment is an analysis of five alternatives developed to address themanagement of the submerged aquatic plants of Banks Lake on Banks Lake...

  4. Satellite remote sensing of submerged aquatic vegetation distribution and status in the Currituck Sound, NC.

    Science.gov (United States)

    2012-11-01

    Submerged Aquatic Vegetation (SAV) is an important component in any estuarine ecosystem. As such, it is regulated by federal and state agencies as a jurisdictional resource, where impacts to SAV are compensated through mitigation. Historically, tradi...

  5. Root transcript profiling of two Rorippa (brassicaceae) species reveals gene clusters associated with extreme submergence tolerance.

    NARCIS (Netherlands)

    Sasidharan, R.; Mustroph, A.; Boonman, A.; Akman, M.; Ammerlaan, A.M.H.; Breit, T.M.; Schranz, M.E.; Voesenek, L.A.C.J.; Tienderen, van P.H.

    2013-01-01

    Complete submergence represses photosynthesis and aerobic respiration, causing rapid mortality in most terrestrial plants. However, some plants have evolved traits allowing them to survive prolonged flooding, such as species of the genus Rorippa, close relatives of Arabidopsis (Arabidopsis

  6. Root transcript profiling of two Rorippa species reveals gene clusters associated with extreme submergence tolerance

    NARCIS (Netherlands)

    Sasidharan, R.; Mustroph, A.; Boonman, A.; Akman, M.; Ammerlaan, A.M.H.; Breit, T.M.; Schranz, M.E.; Voesenek, L.A.C.J.; van Tienderen, P.H.

    2013-01-01

    Complete submergence represses photosynthesis and aerobic respiration, causing rapid mortality in most terrestrial plants. However, some plants have evolved traits allowing them to survive prolonged flooding, such as species of the genus Rorippa, close relatives of Arabidopsis (Arabidopsis

  7. Swan foraging shapes spatial distribution of two submerged plants, favouring the preferred prey species

    NARCIS (Netherlands)

    Sandsten, H.; Klaassen, M.R.J.

    2008-01-01

    Compared to terrestrial environments, grazing intensity on belowground plant parts may be particularly strong in aquatic environments, which may have great effects on plant-community structure. We observed that the submerged macrophyte, Potamogeton pectinatus, which mainly reproduces with tubers,

  8. EAARL-B Submerged Topography—Saint Thomas, U.S. Virgin Islands, 2014

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — ASCII XYZ point cloud data for a portion of the submerged environs of Saint Thomas, U.S. Virgin Islands, was produced from remotely sensed, geographically referenced...

  9. Uncalibrated EAARL-B Submerged Topography--Fort Lauderdale, Florida, 2014 (WGS84)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Binary point-cloud data of a portion of the submerged environs of Fort Lauderdale, Florida, were produced from remotely sensed, geographically referenced elevation...

  10. Calibrated EAARL-B Submerged Topography--Fort Lauderdale, Florida, 2014 (WGS84)

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Binary point-cloud data of a portion of the submerged environs of Fort Lauderdale, Florida, were produced from remotely sensed, geographically referenced elevation...

  11. Outer Continental Shelf Submerged Lands Act Boundary - Pacific Region - West Coast NAD83

    Data.gov (United States)

    Bureau of Ocean Energy Management, Department of the Interior — This data set contains the Submerged Lands Act (SLA)boundary line (also known as the State Seaward Boundary (SSB) and Fed State Boundary) for the BOEM Pacific Region...

  12. Process Modeling and Optimization of a Submerged Arc Furnace for Phosphorus Production

    NARCIS (Netherlands)

    Scheepers, E.; Yang, Y.; Adema, A.T.; Boom, R.; Reuter, M.A.

    2010-01-01

    This article presents a process model of a phosphorus-producing, submerged arc furnace. The model successfully incorporates accurate, multifield thermodynamic, kinetic, and industrial data with computational flow dynamic calculations and thus further unifies the sciences of kinetics and equilibrium

  13. EAARL-B Submerged Topography - Saint Croix and Saint Thomas, U.S. Virgin Islands, 2014

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Binary point-cloud data for part of the submerged environs of Saint Croix and Saint Thomas, U.S. Virgin Islands, were produced from remotely sensed, geographically...

  14. Outer Continental Shelf Submerged Lands Act Boundary - Alaska Region NAD83

    Data.gov (United States)

    Bureau of Ocean Energy Management, Department of the Interior — This data set contains the Submerged Lands Act (SLA) boundary (also known as State Seaward Boundary (SSB), or Fed State Boundary) in ESRI shapefile format for the...

  15. Tolerance of combined submergence and salinity in the halophytic stem-succulent Tecticornia pergranulata

    DEFF Research Database (Denmark)

    Colmer, T D; Vos, H; Pedersen, Ole

    2009-01-01

    in waters of high salinity. A 'quiescence response', i.e. no shoot growth, would conserve carbohydrates, but tissue sugars still declined with time. A low K(+) : Na(+) ratio, typical for tissues of succulent halophytes, was tolerated even during prolonged submergence, as evidenced by maintenance......BACKGROUND AND AIMS: Habitats occupied by many halophytes are not only saline, but are also prone to flooding. Few studies have evaluated submergence tolerance in halophytes. METHODS: Responses to submergence, at a range of salinity levels, were studied for the halophytic stem-succulent Tecticornia...... pergranulata subsp. pergranulata (syn. Halosarcia pergranulata subsp. pergranulata). Growth and total sugars in succulent stems were assessed as a function of time after submergence. Underwater net photosynthesis, dark respiration, total sugars, glycinebetaine, Na(+), Cl(-) and K(+), in succulent stems, were...

  16. Dynamic Response Analysis of Cable of Submerged Floating Tunnel under Hydrodynamic Force and Earthquake

    Directory of Open Access Journals (Sweden)

    Zhiwen Wu

    2017-01-01

    Full Text Available A simplified analysis model of cable for submerged floating tunnel subjected to parametrically excited vibrations in the ocean environment is proposed in this investigation. The equation of motion of the cable is obtained by a mathematical method utilizing the Euler beam theory and the Galerkin method. The hydrodynamic force induced by earthquake excitations is formulated to simulate real seaquake conditions. The random earthquake excitation in the time domain is formulated by the stochastic phase spectrum method. An analytical model for analyzing the cable for submerged floating tunnel subjected to combined hydrodynamic forces and earthquake excitations is then developed. The sensitivity of key parameters including the hydrodynamic, earthquake, and structural parameters on the dynamic response of the cable is investigated and discussed. The present model enables a preliminary examination of the hydrodynamic and seismic behavior of cable for submerged floating tunnel and can provide valuable recommendations for use in design and operation of anchor systems for submerged floating tunnel.

  17. EAARL-B submerged topography: Barnegat Bay, New Jersey, pre-Hurricane Sandy, 2012

    Science.gov (United States)

    Wright, C. Wayne; Troche, Rodolfo J.; Klipp, Emily S.; Kranenburg, Christine J.; Fredericks, Alexandra M.; Nagle, David B.

    2014-01-01

    These remotely sensed, geographically referenced elevation measurements of lidar-derived submerged topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida.

  18. Metal accumulation by submerged macrophytes in eutrophic lakes at the watershed scale.

    Science.gov (United States)

    Xing, Wei; Wu, Haoping; Hao, Beibei; Liu, Guihua

    2013-10-01

    Metal concentrations (Al, Ba, Ca, K, Li, Mg, Na, Se, Sr and Ti) in submerged macrophytes and corresponding water and sediments were studied in 24 eutrophic lakes along the middle and lower reaches of the Yangtze River (China). Results showed that these eutrophic lakes have high metal concentrations in both water and sediments because of human activities. Average concentrations of Al and Na in tissues of submerged macrophytes were very high in sampled eutrophic lakes. By comparison, Ceratophyllum demersum and Najas marina accumulated more metals (e.g. Ba, Ca, K, Mg, Na, Sr and Ti). Strong positive correlations were found between metal concentrations in tissues of submerged macrophytes, probably because of co-accumulation of metals. The concentrations of Li, Mg, Na and Sr in tissues of submerged macrophytes significantly correlated with their corresponding water values, but not sediment values.

  19. Outer Continental Shelf Submerged Lands Act Boundary - Gulf of Mexico Region NAD27

    Data.gov (United States)

    Bureau of Ocean Energy Management, Department of the Interior — This data set contains the Submerged Lands Act (SLA) boundary line (also known as State Seaward Boundary (SSB), or Fed State Boundary)in ESRI shapefile formats for...

  20. Suitability of seagrasses and submerged aquatic vegetation as indicators of eutrophication

    Science.gov (United States)

    Rooted submerged aquatic vegetation (SAV) encompasses a large diversity of species that range from obligate halophytes such as, seagrasses, to euryhaline species and freshwater obligates. All seagrass and SAV provide key biological functions within the enclosed bays, estuaries, a...

  1. EAARL Submerged Topography - U.S. Virgin Islands 2003

    Science.gov (United States)

    Nayegandhi, Amar; Brock, John C.; Wright, C. Wayne; Stevens, Sara; Yates, Xan; Bonisteel, Jamie M.

    2008-01-01

    These remotely sensed, geographically referenced elevation measurements of Lidar-derived submerged topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), South Florida-Caribbean Network, Miami, FL; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate bathymetric datasets of a portion of the U.S. Virgin Islands, acquired on April 21, 23, and 30, May 2, and June 14 and 17, 2003. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and

  2. Submerged Medium Voltage Cable Systems at Nuclear Power Plants. A Review of Research Efforts Relevant to Aging Mechanisms and Condition Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Jason [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bernstein, Robert [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); White, II, Gregory Von [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Glover, Steven F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neely, Jason C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Pena, Gary [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Williamson, Kenneth Martin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Zutavern, Fred J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gelbard, Fred [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-03-01

    and industrial literature was performed to identify : 1) findings regarding the degradation mechanisms of submerged cabling and 2) condition monitoring methods that may prove useful in predict ing the remaining lifetime of submerged medium voltage p ower cables . The re search was conducted by a multi - disciplinary team , and s ources includ ed official NRC reports, n ational l aboratory reports , IEEE standards, conference and journal proceedings , magazine articles , PhD dissertations , and discussions with experts . The purpose of this work was to establish the current state - of - the - art in material degradation modeling and cable condition monitoring techniques and to identify research gaps . Subsequently, future areas of focus are recommended to address these research gaps and thus strengthen the efficacy of the NRC's developing cable condition monitoring program . Results of this literature review and details of the test ing recommendations are presented in this report . FOREWORD To ensure the safe, re liable, and cost - effective long - term operation of nuclear power plants, many systems, structures, and components must be continuously evaluated. The Nuclear Regulatory Commission (NRC) has identified that cables in submerged environments are of concern, particularly as plants are seeking license renewal. To date, there is a lack of consensus on aging and degradation mechanisms even though the area of submerged cables has been extensively studied. Consequently, the ability to make lifetime predictions for submerged cable does not yet exist. The NRC has engaged Sandia National Laboratories (SNL) to lead a coordinated effort to help elucidate the aging and degradation of cables in submerged environments by collaborating with cable manufacturers, utilities, universities, and other government agencies. A team of SNL experts was assembled from the laboratories including electrical condition monitoring, mat erial science, polymer degradation, plasma physics

  3. Anatomy of floating and submerged leaves of heterophyllous plant of Nymphaea candida L.

    OpenAIRE

    E.N. Klimenko

    2014-01-01

    The data on anatomy of floating and submerged leaves of heterophyllous aquatic plant Nymphaea candida L. are presented. Anatomy of floating leaves is shown to be different from that of submerged leaves: the absence of stomata, asterosclereids, and differentiated parenchyma, as well as by reduce intercellular volume and leaf width. Common patterns of leaf structure plasticity of aquatic heterophyllous plants in dependence on the environment are discussed.

  4. Aquatic adventitious root development in partially and completely submerged wetland plants Cotula coronopifolia and Meionectes brownii.

    Science.gov (United States)

    Rich, Sarah Meghan; Ludwig, Martha; Colmer, Timothy David

    2012-07-01

    A common response of wetland plants to flooding is the formation of aquatic adventitious roots. Observations of aquatic root growth are widespread; however, controlled studies of aquatic roots of terrestrial herbaceous species are scarce. Submergence tolerance and aquatic root growth and physiology were evaluated in two herbaceous, perennial wetland species Cotula coronopifolia and Meionectes brownii. Plants were raised in large pots with 'sediment' roots in nutrient solution and then placed into individual tanks and shoots were left in air or submerged (completely or partially). The effects on growth of aquatic root removal, and of light availability to submerged plant organs, were evaluated. Responses of aquatic root porosity, chlorophyll and underwater photosynthesis, were studied. Both species tolerated 4 weeks of complete or partial submergence. Extensive, photosynthetically active, aquatic adventitious roots grew from submerged stems and contributed up to 90 % of the total root dry mass. When aquatic roots were pruned, completely submerged plants grew less and had lower stem and leaf chlorophyll a, as compared with controls with intact roots. Roots exposed to the lowest PAR (daily mean 4.7 ± 2.4 µmol m(-2) s(-1)) under water contained less chlorophyll, but there was no difference in aquatic root biomass after 4 weeks, regardless of light availability in the water column (high PAR was available to all emergent shoots). Both M. brownii and C. coronopifolia responded to submergence with growth of aquatic adventitious roots, which essentially replaced the existing sediment root system. These aquatic roots contained chlorophyll and were photosynthetically active. Removal of aquatic roots had negative effects on plant growth during partial and complete submergence.

  5. Agenesis of premolar associated with submerged primary molar and a supernumerary premolar: An unusual case report

    Directory of Open Access Journals (Sweden)

    S. V. S. G. Nirmala

    2012-01-01

    Full Text Available The combination of submerged primary molar, agenesis of permanent successor with a supernumerary in the same place is very rare. The purpose of this article is to report a case of submerged mandibular left second primary molar with supernumerary tooth in the same region along with agenesis of second premolar in an 11-year-old girl, its possible etiological factors, and a brief discussion on treatment options.

  6. Parametric and Nonparametric Analysis of LANDSAT TM and MSS Imagery for Detecting Submerged Plant Communities

    Science.gov (United States)

    Ackleson, S. G.; Klemas, V.

    1984-01-01

    The spatial, spectral and radiometric characteristics of LANDSAT TM and MSS imagery for detecting submerged aquatic vegetation are assessed. The problem is approached from two perspectives; purely stochastic or nonparametric in a radiative sense and theoretical in which radiative transfer equations are used to predict upwelling radiance at satellite altitude. The spectral and radiometric aspects of the theoretical approach are addressed with which a submerged plant canopy is distinguished from a surrounding bottom of sand or mud.

  7. Growth rate, protein:RNA ratio and stoichiometric homeostasis of submerged macrophytes under eutrophication stress

    Directory of Open Access Journals (Sweden)

    Xing W.

    2016-01-01

    Full Text Available Growth rate hypothesis (GRH and stoichiometric homeostasis of photoautotrophs have always been questioned. However, little is known about GRH and stoichiometric homeostasis of aquatic plants, especially submerged macrophytes. Therefore, we aim to test the GRH and explore stoichiometric homeostasis of four freshwater submerged macrophytes under eutrophication stress. At the single species level and the multi-species level, N:P ratios of Potamogeton maackianus, Myriophyllum spicatum, Vallisneria natans and Ceratophyllum demersum had no consistent trends with growth rates. However, protein:RNA ratios of P. maackianus, M. spicatum and V. natans all correlated negatively with growth rates, demonstrating GRH can apply to freshwater submerged macrophytes, even though they are threatening by eutrophication stress. Protein:RNA ratios positively correlated with N:P ratios in culture media and tissues in submerged macrophytes except in P. maackianus (30d, suggesting effects of varying N:P ratios in culture media on protein:RNA ratios are basically in concert with tissue N:P ratios under short-time eutrophication stress. Stoichiometric homeostasis coefficients (HN:P indicated submerged macrophytes have weak homeostasis. Stoichiometric homeostasis of V. natans was stronger than those of P. maackianus, M. spicatum and C. demersum. The differences in GRH and homeostasis of the four submerged macrophytes may be due to species traits.

  8. Superconducting bearings for flywheel applications

    DEFF Research Database (Denmark)

    Abrahamsen, A.B.

    2001-01-01

    A literature study on the application of superconducting bearings in energy storage flywheel systems. The physics of magnetic levitation and superconductors are presented in the first part of the report, followed by a discussion of the literature found onthe applications of superconducting bearings...

  9. Structural and Acoustic Responses of a Submerged Stiffened Conical Shell

    Directory of Open Access Journals (Sweden)

    Meixia Chen

    2014-01-01

    Full Text Available This paper studies the vibrational behavior and far-field sound radiation of a submerged stiffened conical shell at low frequencies. The solution for the dynamic response of the conical shell is presented in the form of a power series. A smeared approach is used to model the ring stiffeners. Fluid loading is taken into account by dividing the conical shell into narrow strips which are considered to be local cylindrical shells. The far-field sound pressure is solved by the Element Radiation Superposition Method. Excitations in two directions are considered to simulate the loading on the surface of the conical shell. These excitations are applied along the generator and normal to the surface of the conical shell. The contributions from the individual circumferential modes on the structural responses of the conical shell are studied. The effects of the external fluid loading and stiffeners are discussed. The results from the analytical models are validated by numerical results from a fully coupled finite element/boundary element model.

  10. [Submerged cultivation and chemical composition of Hericium erinaceus mycelium].

    Science.gov (United States)

    Avtonomova, A V; Bakanov, A V; Shuktueva, M I; Vinokurov, V A; Popova, O V; Usov, A I; Krasnopol'skaia, L M

    2012-01-01

    Submerged cultivation of Hericium erinaceus in various media was studied. The yield of the biomass was shown to depend mainly on the carbon source, whereas the content of water soluble polysaccharides depended mainly on the nitrogen source. The optimal medium composition provided the biomass yield of 21-23 g/l in 7 days. The biomass was characterized by the content of total protein, lipids and carbohydrates. In addition, the amino acid composition of the biomass was determined and shown to meet all the requirements of FAO/WHO concerning the amounts of essential amino acids (with exception of tryptophane). Oleinic and linoleic acids were identified as the main components of the fatty acids. Two water soluble polysaccharide fractions differing in solubility in aqueous ethanol were isolated and shown to contain rhamnose, fucose, xylose, glucose and galactose in different proportions. Vitamins B1, B2, B6, PP and E, ergosterol and coenzyme Q were also detected in the biomass of H. erinaceus.

  11. Underwater Photosynthesis of Submerged Plants – Recent Advances and Methods

    Science.gov (United States)

    Pedersen, Ole; Colmer, Timothy D.; Sand-Jensen, Kaj

    2013-01-01

    We describe the general background and the recent advances in research on underwater photosynthesis of leaf segments, whole communities, and plant dominated aquatic ecosystems and present contemporary methods tailor made to quantify photosynthesis and carbon fixation under water. The majority of studies of aquatic photosynthesis have been carried out with detached leaves or thalli and this selectiveness influences the perception of the regulation of aquatic photosynthesis. We thus recommend assessing the influence of inorganic carbon and temperature on natural aquatic communities of variable density in addition to studying detached leaves in the scenarios of rising CO2 and temperature. Moreover, a growing number of researchers are interested in tolerance of terrestrial plants during flooding as torrential rains sometimes result in overland floods that inundate terrestrial plants. We propose to undertake studies to elucidate the importance of leaf acclimation of terrestrial plants to facilitate gas exchange and light utilization under water as these acclimations influence underwater photosynthesis as well as internal aeration of plant tissues during submergence. PMID:23734154

  12. Immunomodulatory properties of Grifola frondosa in submerged culture.

    Science.gov (United States)

    Wu, Ming-Jiuan; Cheng, Tso-Lin; Cheng, Su-Yun; Lian, Tzi-Wei; Wang, Lisu; Chiou, Shu-Yuan

    2006-04-19

    Maitake (Grifola frondosa) is a popular mushroom in Asia for its tasty flavor and immune-stimulating property. The aim of the study is to investigate the innate immunity augmentation effects of different extracts of mycelia and culture filtrate from G. frondosa in submerged cultures. The hot water extract of mycelia showed the strongest cytokine induction effect as a function of its concentration in human whole blood culture. The most potent fractions of hot water extract, Fr. I and II, were mainly composed of polysaccharides with molecular masses of 43-140 and 13-38 kDa, respectively. These fractions (0.025 mg/mL) showed marked activity in enhancing phagocytosis of human polymorphonuclear neutrophils (PMN). In parallel, the expression of CD11b, an early marker of PMN activation, was also up-regulated dose dependently. This result suggested that complement receptor 3 was primed by these fractions. In addition to activation of phagocytes, these bioactive fractions also increased human peripheral blood natural killer cell cytotoxicity. These results imply that the relatively low molecular mass polysaccharides isolated from mycelia of G. frondosa can enhance innate immunity in vitro and therefore may serve as biological response modifiers.

  13. The use of bottle caps as submerged aerated filter medium.

    Science.gov (United States)

    Damasceno de Oliveira, Laurence; Motlagh, Amir Mohaghegh; Goel, Ramesh; de Souza Missagia, Beatriz; Alves de Abreu Filho, Benício; Lautenschlager, Sandro Rogério

    2014-01-01

    In this study, a submerged aerated filter (SAF) using bottle caps as a support medium was evaluated. The system was fed with effluent from an upflow anaerobic sludge blanket system at ETE 2-South wastewater treatment plant, under different volumetric organic load rates (VOLRs). The population of a particular nitrifying microbial community was assessed by fluorescent in situ hybridization with specific oligonucleotide probes. The system showed an average removal of chemical oxygen demand (COD) equal to 76% for VOLRs between 2.6 and 13.6 kg COD m(-3)_media.day(-1). The process of nitrification in conjunction with the removal of organic matter was observed from applying VOLRs lower than 5.5 kg COD m(-3)_media.day(-1) resulting in 78% conversion of NH4(+)-N. As the applied organic load was reduced, an increase in the nitrifying bacteria population was observed compared with total 4'-6-diamidino-2-phenylindole (DAPI) stained cells. Generally, SAF using bottle caps as a biological aerated filter medium treating wastewater from an anaerobic system showed promising removal of chemical oxygen demand (COD) and conversion of NH4(+)-N.

  14. Stainless steel submerged arc weld fusion line toughness

    Energy Technology Data Exchange (ETDEWEB)

    Rosenfield, A.R.; Held, P.R.; Wilkowski, G.M. [Battelle, Columbus, OH (United States)

    1995-04-01

    This effort evaluated the fracture toughness of austenitic steel submerged-arc weld (SAW) fusion lines. The incentive was to explain why cracks grow into the fusion line in many pipe tests conducted with cracks initially centered in SAWS. The concern was that the fusion line may have a lower toughness than the SAW. It was found that the fusion line, Ji. was greater than the SAW toughness but much less than the base metal. Of greater importance may be that the crack growth resistance (JD-R) of the fusion line appeared to reach a steady-state value, while the SAW had a continually increasing JD-R curve. This explains why the cracks eventually turn to the fusion line in the pipe experiments. A method of incorporating these results would be to use the weld metal J-R curve up to the fusion-line steady-state J value. These results may be more important to LBB analyses than the ASME flaw evaluation procedures, since there is more crack growth with through-wall cracks in LBB analyses than for surface cracks in pipe flaw evaluations.

  15. Nigeria Journal of Pure and Applied Physics: Journal Sponsorship

    African Journals Online (AJOL)

    Nigeria Journal of Pure and Applied Physics: Journal Sponsorship. Journal Home > About the Journal > Nigeria Journal of Pure and Applied Physics: Journal Sponsorship. Log in or Register to get access to full text downloads.

  16. Scopus: Journal of East African Ornithology: Journal Sponsorship

    African Journals Online (AJOL)

    Scopus: Journal of East African Ornithology: Journal Sponsorship. Journal Home > About the Journal > Scopus: Journal of East African Ornithology: Journal Sponsorship. Log in or Register to get access to full text downloads.

  17. Journal of Social Development in Africa: Journal Sponsorship

    African Journals Online (AJOL)

    Journal of Social Development in Africa: Journal Sponsorship. Journal Home > About the Journal > Journal of Social Development in Africa: Journal Sponsorship. Log in or Register to get access to full text downloads.

  18. South African Journal of Higher Education: Journal Sponsorship

    African Journals Online (AJOL)

    South African Journal of Higher Education: Journal Sponsorship. Journal Home > About the Journal > South African Journal of Higher Education: Journal Sponsorship. Log in or Register to get access to full text downloads.

  19. Zagazig Journal of Occupational Health and Safety: Journal ...

    African Journals Online (AJOL)

    Zagazig Journal of Occupational Health and Safety: Journal Sponsorship. Journal Home > About the Journal > Zagazig Journal of Occupational Health and Safety: Journal Sponsorship. Log in or Register to get access to full text downloads.

  20. Journal of the Ghana Institution of Engineers: Journal Sponsorship

    African Journals Online (AJOL)

    Journal of the Ghana Institution of Engineers: Journal Sponsorship. Journal Home > About the Journal > Journal of the Ghana Institution of Engineers: Journal Sponsorship. Log in or Register to get access to full text downloads.

  1. Journal of Meteorology and Climate Science: Journal Sponsorship

    African Journals Online (AJOL)

    Journal of Meteorology and Climate Science: Journal Sponsorship. Journal Home > About the Journal > Journal of Meteorology and Climate Science: Journal Sponsorship. Log in or Register to get access to full text downloads.

  2. Journal of the Eritrean Medical Association: Journal Sponsorship

    African Journals Online (AJOL)

    Journal of the Eritrean Medical Association: Journal Sponsorship. Journal Home > About the Journal > Journal of the Eritrean Medical Association: Journal Sponsorship. Log in or Register to get access to full text downloads.

  3. International Journal of Biological and Chemical Sciences: Journal ...

    African Journals Online (AJOL)

    International Journal of Biological and Chemical Sciences: Journal Sponsorship. Journal Home > About the Journal > International Journal of Biological and Chemical Sciences: Journal Sponsorship. Log in or Register to get access to full text downloads.

  4. East and Central African Journal of Surgery: Journal Sponsorship

    African Journals Online (AJOL)

    East and Central African Journal of Surgery: Journal Sponsorship. Journal Home > About the Journal > East and Central African Journal of Surgery: Journal Sponsorship. Log in or Register to get access to full text downloads.

  5. Journal of the Nigerian Association of Mathematical Physics: Journal ...

    African Journals Online (AJOL)

    Journal of the Nigerian Association of Mathematical Physics: Journal Sponsorship. Journal Home > About the Journal > Journal of the Nigerian Association of Mathematical Physics: Journal Sponsorship. Log in or Register to get access to full text downloads.

  6. South African Journal of Sports Medicine: Journal Sponsorship

    African Journals Online (AJOL)

    South African Journal of Sports Medicine: Journal Sponsorship. Journal Home > About the Journal > South African Journal of Sports Medicine: Journal Sponsorship. Log in or Register to get access to full text downloads.

  7. Journal of Agriculture and Food Sciences: Journal Sponsorship

    African Journals Online (AJOL)

    Journal of Agriculture and Food Sciences: Journal Sponsorship. Journal Home > About the Journal > Journal of Agriculture and Food Sciences: Journal Sponsorship. Log in or Register to get access to full text downloads.

  8. Journal of History and Diplomatic Studies: Journal Sponsorship

    African Journals Online (AJOL)

    Journal of History and Diplomatic Studies: Journal Sponsorship. Journal Home > About the Journal > Journal of History and Diplomatic Studies: Journal Sponsorship. Log in or Register to get access to full text downloads.

  9. International Journal of Medicine and Biomedical Research: Journal ...

    African Journals Online (AJOL)

    International Journal of Medicine and Biomedical Research: Journal Sponsorship. Journal Home > About the Journal > International Journal of Medicine and Biomedical Research: Journal Sponsorship. Log in or Register to get access to full text downloads.

  10. Western Indian Ocean Journal of Marine Science: Journal ...

    African Journals Online (AJOL)

    Western Indian Ocean Journal of Marine Science: Journal Sponsorship. Journal Home > About the Journal > Western Indian Ocean Journal of Marine Science: Journal Sponsorship. Log in or Register to get access to full text downloads.

  11. Arab Journal of Nephrology and Transplantation: Journal Sponsorship

    African Journals Online (AJOL)

    Arab Journal of Nephrology and Transplantation: Journal Sponsorship. Journal Home > About the Journal > Arab Journal of Nephrology and Transplantation: Journal Sponsorship. Log in or Register to get access to full text downloads.

  12. Eastern Africa Journal of Rural Development: Journal Sponsorship

    African Journals Online (AJOL)

    Eastern Africa Journal of Rural Development: Journal Sponsorship. Journal Home > About the Journal > Eastern Africa Journal of Rural Development: Journal Sponsorship. Log in or Register to get access to full text downloads.

  13. Agricultural and Food Science Journal of Ghana: Journal Sponsorship

    African Journals Online (AJOL)

    Agricultural and Food Science Journal of Ghana: Journal Sponsorship. Journal Home > About the Journal > Agricultural and Food Science Journal of Ghana: Journal Sponsorship. Log in or Register to get access to full text downloads.

  14. Lagos Journal of Library and Information Science: Journal ...

    African Journals Online (AJOL)

    Lagos Journal of Library and Information Science: Journal Sponsorship. Journal Home > About the Journal > Lagos Journal of Library and Information Science: Journal Sponsorship. Log in or Register to get access to full text downloads.

  15. Journal of Computer Science and Its Application: Journal Sponsorship

    African Journals Online (AJOL)

    Journal of Computer Science and Its Application: Journal Sponsorship. Journal Home > About the Journal > Journal of Computer Science and Its Application: Journal Sponsorship. Log in or Register to get access to full text downloads.

  16. African Journal of Finance and Management: Journal Sponsorship

    African Journals Online (AJOL)

    African Journal of Finance and Management: Journal Sponsorship. Journal Home > About the Journal > African Journal of Finance and Management: Journal Sponsorship. Log in or Register to get access to full text downloads.

  17. Journal of Applied Chemistry and Agricultural Research: Journal ...

    African Journals Online (AJOL)

    Journal of Applied Chemistry and Agricultural Research: Journal Sponsorship. Journal Home > About the Journal > Journal of Applied Chemistry and Agricultural Research: Journal Sponsorship. Log in or Register to get access to full text downloads.

  18. Journal of the South African Society of Archivists: Journal Sponsorship

    African Journals Online (AJOL)

    Journal of the South African Society of Archivists: Journal Sponsorship. Journal Home > About the Journal > Journal of the South African Society of Archivists: Journal Sponsorship. Log in or Register to get access to full text downloads.

  19. South African Journal of Animal Science: Journal Sponsorship

    African Journals Online (AJOL)

    South African Journal of Animal Science: Journal Sponsorship. Journal Home > About the Journal > South African Journal of Animal Science: Journal Sponsorship. Log in or Register to get access to full text downloads.

  20. Plant Products Research Journal

    African Journals Online (AJOL)

    Production and characterization of pectinases obtained from Aspergillus fumigatus in submerged fermentation system using pectin extracted from mango peels as carbon source · EMAIL FULL TEXT EMAIL FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. AL Ezugwu, SOO Eze, FC Chilaka, CU Anyanwu ...

  1. Archives: Nigerian Veterinary Journal

    African Journals Online (AJOL)

    Items 1 - 49 of 49 ... Archives: Nigerian Veterinary Journal. Journal Home > Archives: Nigerian Veterinary Journal. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. 1 - 49 of 49 Items ...

  2. Archives: Ethiopian Veterinary Journal

    African Journals Online (AJOL)

    Items 1 - 16 of 16 ... Archives: Ethiopian Veterinary Journal. Journal Home > Archives: Ethiopian Veterinary Journal. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. 1 - 16 of 16 Items ...

  3. Archives: Tanzania Veterinary Journal

    African Journals Online (AJOL)

    Items 1 - 15 of 15 ... Archives: Tanzania Veterinary Journal. Journal Home > Archives: Tanzania Veterinary Journal. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. 1 - 15 of 15 Items ...

  4. Nigerian Food Journal: Contact

    African Journals Online (AJOL)

    Nigerian Food Journal. ... Nigerian Food Journal: Contact. Journal Home > About the Journal > Nigerian Food Journal: Contact. Log in or Register to get access to full text downloads. ... Mailing Address. Department of Food Science and Technology University of Agriculture, Makurdi, Nigeria ...

  5. SA Journal of Radiology

    African Journals Online (AJOL)

    Journal Homepage Image. The SA Journal of Radiology is the official journal of the Radiological Society of South Africa and the Professional Association of Radiologists in South Africa and Namibia. The SA Journal of Radiology is a general diagnostic radiological journal which carries original research and review articles, ...

  6. Archives: Science World Journal

    African Journals Online (AJOL)

    Items 1 - 39 of 39 ... Archives: Science World Journal. Journal Home > Archives: Science World Journal. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. 1 - 39 of 39 Items. 2017 ...

  7. Open Journal Systems Help

    African Journals Online (AJOL)

    The journal provides a set of Author Guidelines in About the Journal that cover the bibliographic and other formatting standards employed by the journal. For aspects not covered in the examples provided by the Guidelines, Authors may also wish to browse through published articles in the journal to see how the journal ...

  8. Early Human Dispersals and Submerged Landscapes : comment on news feature "Migration: value of submerged early sites" in Nature's May 2012 special issue "Peopling the Planet"

    NARCIS (Netherlands)

    Flemming, Nicholas; Bailey, Geoffrey N.; Sakellariou, Dimitris; Arias, Pablo; Canals, M.; Chiocci, Francesco Latino; Cohen, K.M.; Erlandson, Jon; Faught, Michael K.; Flatman, Joe; Fischer, Anders; Galili, Ehud; Harff, Jan; Lericolais, Gilles; Lűth, Friedrich

    2012-01-01

    Your articles on human dispersal in the late Pleistocene epoch (Nature 485, 23; 2012) overlook the significance of now-submerged archaeological sites on the continental shelf during this period (126,000–11,000 years ago). It is wrong to assume that these were completely destroyed by the sea and that

  9. Report on Quality and Manufacturing of Bear Bile from Living Bear

    OpenAIRE

    川原, 一仁; 木谷, 千穂; 吉村, 千明; 田中, 俊弘; KAZUHITO, KAWAHARA; CHIHO, KITANI; CHIAKI, YOSHIMURA; TOSHIHIRO, TANAKA; 日野薬品株式会社; 岐阜薬科大学; Hino Pharmaceutical Co., Ltd.; Gifu Pharmaceutical University

    1995-01-01

    Bear bile has been obtained from bears after slaughtering the animals. Today, in China, bear bile is collected in bear farms without killing the animals. And it has confirmed that the third generation (kept) is artificially bred. The ingredients of bear bile collected from live bear in Heilongjian, Liaoning, Jiling, Sichuan, Shanxi, and Shanghai were compared with those of natural bear bile obtained by killing bear in India and Canada, by thin-layer chromatography. The main component was taur...

  10. Trophic cascades from wolves to grizzly bears in Yellowstone.

    Science.gov (United States)

    Ripple, William J; Beschta, Robert L; Fortin, Jennifer K; Robbins, Charles T

    2014-01-01

    We explored multiple linkages among grey wolves (Canis lupus), elk (Cervus elaphus), berry-producing shrubs and grizzly bears (Ursus arctos) in Yellowstone National Park. We hypothesized competition between elk and grizzly bears whereby, in the absence of wolves, increases in elk numbers would increase browsing on berry-producing shrubs and decrease fruit availability to grizzly bears. After wolves were reintroduced and with a reduced elk population, we hypothesized there would be an increase in the establishment of berry-producing shrubs, such as serviceberry (Amelanchier alnifolia), which is a major berry-producing plant. We also hypothesized that the percentage fruit in the grizzly bear diet would be greater after than before wolf reintroduction. We compared the frequency of fruit in grizzly bear scats to elk densities prior to wolf reintroduction during a time of increasing elk densities (1968-1987). For a period after wolf reintroduction, we calculated the percentage fruit in grizzly bear scat by month based on scats collected in 2007-2009 (n = 778 scats) and compared these results to scat data collected before wolf reintroduction. Additionally, we developed an age structure for serviceberry showing the origination year of stems in a northern range study area. We found that over a 19-year period, the percentage frequency of fruit in the grizzly diet (6231 scats) was inversely correlated (P wolves and other large carnivores on elk, a reduced and redistributed elk population, decreased herbivory and increased production of plant-based foods that may aid threatened grizzly bears. © 2013 The Authors. Journal of Animal Ecology © 2013 British Ecological Society.

  11. Eastern slopes grizzly bear project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-01-01

    The cumulative effects of human activities on the grizzly bears in the central Canadian Rockies are not well known. As a result, a project was initiated in 1994 to address the urgent requirement for accurate scientific information on the habitat and populations of grizzly bears in the area of the Banff National Park and Kananaskis Country. This area is probably the most heavily used and developed area where the grizzly still survives. The information gathered throughout the course of this study will be used to better protect and manage the bears and other sensitive carnivores in the region. Using telemetry, researchers are monitoring 25 grizzly bears which were radio-collared in a 22,000 square-kilometer area in the upper Bow Valley drainage of the eastern Alberta slopes. The researchers involved in the project are working with representatives from Husky Oil and Talisman Energy on the sound development of the Moose Mountain oil and gas field without adversely affecting the grizzly bear population. Information collected over seven years indicated that the grizzly bears have few and infrequent offspring. Using the information gathered so far, the location of the Moose Mountain to Jumping Pound pipeline was carefully selected, since the bears recover very slowly from high mortality, and also considering that the food and cover had already been compromised by the high number of roads, trails and other human activities in the area. The status of the population and habitat of the grizzly bear will be assessed upon the conclusion of the field research phase in 2001. Models will be updated using the data obtained during eight years and will assist in the understanding of complex variables that affect grizzly bears.

  12. Further excavations of the submerged city of Dwarka

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, S.R.

    of the underwater search for the lost city have appeared in Progress and Prospects of Marine Archaeology in India, 1987, Marine Archaeology of Indian Ocean Countries, 1988, 40 years of Research - A CSIR Overview, 1988 and Journal of Marine Archaeology, 1990...

  13. The Dynamic Characteristic Analysis of the Water Lubricated Bearing-Rotor System in Seawater Desalination Pump

    Directory of Open Access Journals (Sweden)

    Xiaoyan Ye

    2014-05-01

    Full Text Available In order to study the water lubricated bearing-rotor system in seawater desalination pump, this paper is based on the coupling between the lubricating flow field and the rotor dynamics. The fluid-solid interaction (FSI method, Rigid Body, was adopted to study the journal orbit of the bearing-rotor system under the periodic unbalancing load. The influences of geometric and working parameter to the journal orbit were combined to analyze the stability and reliability of the bearing-rotor system. The result shows that increasing the rotating speed would increase the journal whirling amplitude and the system sensitivity to the external excitation and unbalancing load were promoted; increasing the aspect ratio would reduce the journal whirling amplitude and cause the system to be more unstable; increasing the inlet pressure would reduce the journal whirling amplitude and cause the system to be more unstable; increasing the unbalancing load would reduce the stability margin and the system is easy to be unstable if obstructed; increasing the radial clearance would reduce the journal whirling amplitude and cause the system to be more unstable. The attitude angle has no influence on the journal whirling amplitude but would influence the stability of system and the value of attitude angle should not be large.

  14. Non-contacting "snubber bearing" for passive magnetic bearing systems

    Science.gov (United States)

    Post, Richard F

    2017-08-22

    A new non-contacting magnetic "snubber" bearing is provided for application to rotating systems such as vehicular electromechanical battery systems subject to frequent accelerations. The design is such that in the equilibrium position the drag force of the snubber is very small (milliwatts). However in a typical case, if the rotor is displaced by as little as 2 millimeters a large restoring force is generated without any physical contact between the stationary and rotating parts of the snubber bearing.

  15. African Journals Online (AJOL)

    African Journals Online (AJOL)

    reviewed, African-published scholarly journals. Historically, scholarly information has flowed from North to South and from West to East. It has also been ... Featured Country: Nigeria, Featured Journal: Nigeria Journal of Pure and Applied Physics ...

  16. African Journals Online (AJOL)

    African Journals Online (AJOL)

    Featured Country: Nigeria, Featured Journal: African Journal of Endocrinology and Metabolism ... Southern African Business Review; The Basis of Distinction Between Qualitative and Quantitative Research in Social Science: Reflection on Ontological, Epistemological and Methodological Perspectives Ethiopian Journal of ...

  17. African Journals Online (AJOL)

    African Journals Online (AJOL)

    It has also been difficult for African researchers to access the work of other African academics. ... Featured Country: Nigeria, Featured Journal: Journal of the Nigerian Infection Control Association ... Journal of Consumer Sciences. Vol 89, No 7 ...

  18. African Journals Online (AJOL)

    African Journals Online (AJOL)

    Use AJOL to: browse peer-reviewed journals from Africa,; download full text articles from journal homepages,; search for an article by title, author/s or keywords,; and find other information sources and more resources for researchers and journals.

  19. Multi-Objective Optimization of Submerged Arc Welding Process

    Directory of Open Access Journals (Sweden)

    Saurav Datta

    2010-06-01

    Full Text Available Submerged arc welding (SAW is an important metal fabrication technology specially applied to join metals of large thickness in a single pass. In order to obtain an efficient joint, several process parameters of SAW need to be studied and precisely selected to improve weld quality. Many methodologies were proposed in the past research to address this issue. However, a good number of past work seeks to optimize SAWprocess parameters with a single response only. In practical situations, not only is the influence of process parameters and their interactive effects on output responses are to be critically examined but also an attempt is to be made to optimize more than one response, simultaneously. To this end, the present study considers four process control parameters viz. voltage (OCV, wire feed rate, traverse speed and electrode stick-out. The selected weld quality characteristics related to features of bead geometry are depth of penetration, reinforcement and bead width. In the present reporting, an integrated approach capable of solving the simultaneous optimization of multi-quality responses in SAW was suggested. In the proposed approach, the responses were transformed into their individual desirability values by selecting appropriate desirability function. Assuming equal importance for all responses, these individual desirability values were aggregated to calculate the overall desirability values. Quadratic Response Surface Methodology (RSM was applied to establish a mathematical model representing overall desirability as a function involving linear, quadratic and interaction effect of process control parameters. This model was optimized finally within the experimental domain using PSO (Particle Swarm Optimization algorithm. A confirmatory test showed a satisfactory result. A detailed methodology of RSM, desirability function (DF and a PSO-based optimization approach was illustrated in the paper.

  20. Fallout plume of submerged oil from Deepwater Horizon

    Science.gov (United States)

    Valentine, David L.; Fisher, G. Burch; Bagby, Sarah C.; Nelson, Robert K.; Reddy, Christopher M.; Sylva, Sean P.; Woo, Mary A.

    2014-01-01

    The sinking of the Deepwater Horizon in the Gulf of Mexico led to uncontrolled emission of oil to the ocean, with an official government estimate of ∼5.0 million barrels released. Among the pressing uncertainties surrounding this event is the fate of ∼2 million barrels of submerged oil thought to have been trapped in deep-ocean intrusion layers at depths of ∼1,000–1,300 m. Here we use chemical distributions of hydrocarbons in >3,000 sediment samples from 534 locations to describe a footprint of oil deposited on the deep-ocean floor. Using a recalcitrant biomarker of crude oil, 17α(H),21β(H)-hopane (hopane), we have identified a 3,200-km2 region around the Macondo Well contaminated by ∼1.8 ± 1.0 × 106 g of excess hopane. Based on spatial, chemical, oceanographic, and mass balance considerations, we calculate that this contamination represents 4–31% of the oil sequestered in the deep ocean. The pattern of contamination points to deep-ocean intrusion layers as the source and is most consistent with dual modes of deposition: a “bathtub ring” formed from an oil-rich layer of water impinging laterally upon the continental slope (at a depth of ∼900–1,300 m) and a higher-flux “fallout plume” where suspended oil particles sank to underlying sediment (at a depth of ∼1,300–1,700 m). We also suggest that a significant quantity of oil was deposited on the ocean floor outside this area but so far has evaded detection because of its heterogeneous spatial distribution. PMID:25349409

  1. Psychology journals

    Directory of Open Access Journals (Sweden)

    Gualberto Buela-Casal

    2007-01-01

    Full Text Available El concepto de publicación internacional es uno de los criterios más utilizado para evaluar la productividad de los investigadores y de las instituciones científicas. Sin embargo, también es uno de los más polémicos, dado que hasta la actualidad no se había definido ni establecido un Índice de Internacionalidad. Este estudio descriptivo analiza las revistas españolas de Psicología incluidas en la base de datos IN-RECS según su nivel de internacionalidad. Cada revista fue evaluada teniendo en cuenta los once criterios de internacionalidad (idioma de publicación, factor de impacto -en este caso el Índice de Impacto según IN-RECS-, países de procedencia de los miembros del los comités editoriales, nombres de la revista, inclusión en el Journal Citation Reports, países de procedencia de los autores, normas de publicación, acceso por internet, acceso por internet gratuito, inclusión en bases de datos y pertenencia a las instituciones “internacionales”. Se sumaron las puntuaciones en todos los criterios y los totales fueron ordenados de mayor a menor dando como resultado el Índice de Internacionalidad de las Revistas Españolas de Psicología. Entre los resultados cabe resaltar que de las cinco primeras revistas del ranking de internacionalidad cuatro son revistas indexadas en la Web of Science.

  2. East African Medical Journal: About this journal

    African Journals Online (AJOL)

    AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL · News. OTHER RESOURCES... for Researchers · for Journals · for Authors · for Policy Makers · about Open Access · Journal Quality.

  3. Submergence Causes Similar Carbohydrate Starvation but Faster Post-Stress Recovery than Darkness in Alternanthera philoxeroides Plants.

    Directory of Open Access Journals (Sweden)

    Xiao Qi Ye

    Full Text Available Carbon assimilation by submerged plants is greatly reduced due to low light levels. It is hypothesized that submergence reduces carbohydrate contents and that plants recover from submergence in the same way as darkness-treated plants. To test this hypothesis, the responses of plants to submergence and darkness were studied and compared. Plants of a submergence-tolerant species, Alternanthera philoxeroides, were exposed to well drained and illuminated conditions, complete submergence conditions or darkness conditions followed by a recovery growth period in a controlled experiment. The biomass maintenance and accumulation, carbohydrate content dynamics and respiration rate in the plants were assessed to quantify the carbohydrate utilization rate and regrowth. The submerged plants maintained higher chlorophyll contents, more green leaf tissue and more biomass; recovered more quickly; and accumulated more carbohydrates and biomass than darkness-treated plants. The respiration rate was continuously reduced in the same pattern under both stress conditions but was maintained at a significantly lower level in the submerged plants; the total soluble sugar and total fructan contents were decreased at approximately the same rate of decrease, reaching similar low levels, in the two stress treatments. The A. philoxeroides plants were more tolerant of submergence than darkness. The faster recovery of desubmerged plants could not be explained by the similar carbohydrate contents at the start of recovery. Other types of carbon reserves besides carbohydrates or other mechanisms such as higher post-stress photosynthetic performance might be involved.

  4. Steady-state and transient analysis of a squeeze film damper bearing for rotor stability

    Science.gov (United States)

    Barrett, L. E.; Gunter, E. J.

    1975-01-01

    A study of the steady-state and transient response of the squeeze film damper bearing is presented. Both the steady-state and transient equations for the hydrodynamic bearing forces are derived. The bearing equivalent stiffness and damping coefficients are determined by steady-state equations. These coefficients are used to find the bearing configuration which will provide the optimum support characteristics based on a stability analysis of the rotor-bearing system. The transient analysis of rotor-bearing systems is performed by coupling the bearing and journal equations and integrating forward in time. The effects of unbalance, cavitation, and retainer springs are included in the analysis. Methods of determining the stability of a rotor-bearing system under the influence of aerodynamic forces and internal shaft friction are discussed with emphasis on solving the system characteristic frequency equation and on producing stability maps. It is shown that for optimum stability and low force transmissability the squeeze bearing should operate at an eccentricity ratio epsilon 0.4.

  5. Lateral Dynamics of Flexible Rotors Supported by Controllable Gas Bearings Theory & Experiment

    DEFF Research Database (Denmark)

    Pierart Vásquez, Fabián Gonzalo; Santos, Ilmar

    2015-01-01

    theoretically as well as experimentally the feasibility of applying active lubrication to gas journal bearings. The operation principle is to generate active forces by regulating the radial injection of a compressible lubricant (gas) by means of piezoelectric actuators mounted on the back of the bearing sleeve....... The active control principle is built using eddy-current sensor signals to detect the lateral motion of the rotor. A feedback law is used to couple the lateral dynamics of a flexible rotor-bearing system with the pneumatic and dynamic characteristics of a piezoelectric actuated valve system. A proportional...

  6. Mixed-mu superconducting bearings

    Science.gov (United States)

    Hull, John R.; Mulcahy, Thomas M.

    1998-01-01

    A mixed-mu superconducting bearing including a ferrite structure disposed for rotation adjacent a stationary superconductor material structure and a stationary permanent magnet structure. The ferrite structure is levitated by said stationary permanent magnet structure.

  7. Testing of bearing materials for large two-stroke marine diesel engines

    DEFF Research Database (Denmark)

    Vølund, Anders; Klit, Peder; Persson, Sebastian

    2017-01-01

    In large two-stroke marine diesel engines, bearings are designed to last the lifetime of the engine. The design has shown very good service experiences. The design parameters of the main bearings are, among others, based on the average maximum specific load which the bearing should operate under....... In general, the frictional loss is less than 1% of the nominal power of the engine but is still a target for optimization. Fatigue mechanisms of bearing lining material are not fully understood and the design limits with regards to minimum oil film thickness, max oil film pressure and oil film pressure...... repeatability and a systematic approach to the experiments. Test performed on the test-rig shows good correlation on the fatigue cracks with those experienced on large two-stroke journal bearings....

  8. Towards Accurate Prediction of Unbalance Response, Oil Whirl and Oil Whip of Flexible Rotors Supported by Hydrodynamic Bearings

    Directory of Open Access Journals (Sweden)

    Rob Eling

    2016-09-01

    Full Text Available Journal bearings are used to support rotors in a wide range of applications. In order to ensure reliable operation, accurate analyses of these rotor-bearing systems are crucial. Coupled analysis of the rotor and the journal bearing is essential in the case that the rotor is flexible. The accuracy of prediction of the model at hand depends on its comprehensiveness. In this study, we construct three bearing models of increasing modeling comprehensiveness and use these to predict the response of two different rotor-bearing systems. The main goal is to evaluate the correlation with measurement data as a function of modeling comprehensiveness: 1D versus 2D pressure prediction, distributed versus lumped thermal model, Newtonian versus non-Newtonian fluid description and non-mass-conservative versus mass-conservative cavitation description. We conclude that all three models predict the existence of critical speeds and whirl for both rotor-bearing systems. However, the two more comprehensive models in general show better correlation with measurement data in terms of frequency and amplitude. Furthermore, we conclude that a thermal network model comprising temperature predictions of the bearing surroundings is essential to obtain accurate predictions. The results of this study aid in developing accurate and computationally-efficient models of flexible rotors supported by plain journal bearings.

  9. Lateral dampers for thrust bearings

    Science.gov (United States)

    Hibner, D. H.; Szafir, D. R.

    1985-01-01

    The development of lateral damping schemes for thrust bearings was examined, ranking their applicability to various engine classes, selecting the best concept for each engine class and performing an in-depth evaluation. Five major engine classes were considered: large transport, military, small general aviation, turboshaft, and non-manrated. Damper concepts developed for evaluation were: curved beam, constrained and unconstrained elastomer, hybrid boost bearing, hydraulic thrust piston, conical squeeze film, and rolling element thrust face.

  10. Solitary and cnoidal wave scattering by a submerged horizontal plate in shallow water

    Directory of Open Access Journals (Sweden)

    Masoud Hayatdavoodi

    2017-06-01

    Full Text Available Solitary and cnoidal wave transformation over a submerged, fixed, horizontal rigid plate is studied by use of the nonlinear, shallow-water Level I Green-Naghdi (GN equations. Reflection and transmission coefficients are defined for cnoidal and solitary waves to quantify the nonlinear wave scattering. Results of the GN equations are compared with the laboratory experiments and other theoretical solutions for linear and nonlinear waves in intermediate and deep waters. The GN equations are then used to study the nonlinear wave scattering by a plate in shallow water. It is shown that in deep and intermediate depths, the wave-scattering varies nonlinearly by both the wavelength over the plate length ratio, and the submergence depth. In shallow water, however, and for long-waves, only the submergence depth appear to play a significant role on wave scattering. It is possible to define the plate submergence depth and length such that certain wave conditions are optimized above, below, or downwave of the plate for different applications. A submerged plate in shallow water can be used as a means to attenuate energy, such as in wave breakers, or used for energy focusing, and in wave energy devices.

  11. [Influence of Submerged Plants on Microbial Community Structure in Sediment of Hongze Lake].

    Science.gov (United States)

    Zhang, Ding-yu; Zhang, Ting-xi; Dong, Dan-ping; Li, De-fang; Wang, Guo-xiang

    2016-05-15

    Phospholipid fatty acids (PLFAs) method was applied to analyze the influence of submerged plants on sediment microbial community structure, in order to investigate the changes of sediment microbial community structure for different kinds of the submerged plants in different growth periods. Particularly, Potamogeton crispus L., Potamogeton pectinatus L and the mixed group were chosen as the typical submerged plants in Hongze Lake for investigation in this paper. The results indicated that the change of total PLFAs in different periods was significant, on the contrary, the PLFA change for different groups in the same period was insignificant. The values of G⁺ PLFA/G⁻ PLFA in the submerged plant group were also highly related to the different growth periods, which demonstrated that the root function of the submerged plant had a severe impact on the microbial community in sediment. Furthermore, some environmental factors, such as Temperature, pH, TOC and DO, were correlated to characteristic phospholipid of PLFAs in sediment, which means the environmental factors could also affect the microbial community structure.

  12. Individual and combined suppressive effects of submerged and floating-leaved macrophytes on algal blooms.

    Science.gov (United States)

    Seto, Mayumi; Takamura, Noriko; Iwasa, Yoh

    2013-02-21

    Shallow lakes and ponds are often characterised either by clear water with abundant submerged macrophytes or by turbid water with abundant phytoplankton. Blooms of toxic filamentous blue-green algae (cyanobacteria) often dominate the phytoplankton community in eutrophic lakes, which threatens ecological functions and biodiversity of freshwater ecosystems. We studied a simple lake model in order to evaluate individual and combined suppressive effects of rooted submerged and rooted floating-leaved macrophytes on algal blooms. Floating-leaved plants are superior competitors for light, whereas submerged plants absorb and reduce available phosphorus in a water column that rooted floating-leaved plants exploit to a lesser extent. We found that mixed vegetation that includes both submerged and floating-leaved plants is more resistant than vegetation comprised by a single plant type to algal invasion triggered by phosphorus loading. In addition, competitive exclusion of submerged plants by floating-leaved plants may promote an algal bloom. These predictions were confirmed by the decision tree analysis of field data from 35 irrigation ponds in Hyogo Prefecture, Japan. Copyright © 2012 Elsevier Ltd. All rights reserved.

  13. Constructed tropical wetlands with integrated submergent-emergent plants for sustainable water quality management.

    Science.gov (United States)

    Tanaka, Norio; Jinadasa, K B S N; Werellagama, D R I B; Mowjood, M I M; Ng, W J

    2006-01-01

    Improvement of primary effluent quality by using an integrated system of emergent plants (Scirpus grossus in the leading subsurface flow arrangement) and submergent plants (Hydrilla verticillata in a subsequent channel) was investigated. The primary effluent was drawn from a septic tank treating domestic sewage from a student dormitory at the University of Peradeniya, Sri Lanka. Influent and effluent samples were collected once every 2 weeks from May 2004 through July 2005 and analyzed to determine water quality parameters. Both the emergent and submergent plants were harvested at predetermined intervals. The results suggested that harvesting prolonged the usefulness of the system and the generation of a renewable biomass with potential economic value. The mean overall pollutant removal efficiencies of the integrated emergent and submergent plant system were biological oxygen demand (BOD5), 65.7%; chemical oxygen demand (COD), 40.8%; ammonium (NH4+-N), 74.8%; nitrate (NO3--N), 38.8%; phosphate (PO43-), 61.2%; total suspended solids (TSS), 65.8%; and fecal coliforms, 94.8%. The submergent plant subsystem improved removal of nutrients that survived the emergent subsystem operated at low hydraulic retention times. The significant improvement in effluent quality following treatment by the submergent plant system indicates the value of incorporating such plants in wetland systems.

  14. Radial magnetic bearings: An overview

    Directory of Open Access Journals (Sweden)

    Weiyu Zhang

    Full Text Available Radial magnetic bearings (RMBs are one of the most commonly used magnetic bearings. They are used widely in the field of ultra-high speed and ultra-precise numerical control machine tools, bearingless motors, high speed flywheels, artificial heart pumps, and molecular pumps, and they are being strengthened and extended in various important areas. In this paper, a comprehensive overview is given of different bearing topologies of RMBs with different stator poles that differ in their construction, the driving mode of electromagnets, power consumption, cost, magnetic circuits, and symmetry. RMBs with different poles and couplings between the two bearing axes in the radial direction responsible for cross-coupling generation are compared. In addition, different shaped rotors are compared, as the performances of magnetic bearing-rotor systems are of great concern to rotor constructions. Furthermore, the parameter design methods, the mathematical models and control strategies of the RMBs are described in detail. From the comparison of topologies, models and control methods for RMBs, the advantages, disadvantages and utilizable perspectives are also analyzed. Moreover, several possible development trends of the RMBs are discussed. Keywords: Radial magnetic bearings (RMBs, Topologies, Mathematical mode, Control strategies, Development trends

  15. 77 FR 70423 - Black Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC...

    Science.gov (United States)

    2012-11-26

    ... Energy Regulatory Commission Black Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC; Notice of Application for Partial Transfer of Licenses, and Soliciting Comments and Motions To Intervene On October 25, 2012, Black Bear Hydro Partners, LLC, sole licensee (transferor) and...

  16. Characteristics and Limitations of Submerged GPS L1 Observations

    Science.gov (United States)

    Steiner, Ladina; Geiger, Alain

    2017-04-01

    Extensive amount of water stored in snow covers has a high impact on flood development during snow melting periods. Early assessment of these parameters in mountain environments enhance early-warning and thus prevention of major impacts. Sub-snow GNSS techniques are lately suggested to determine liquid water content, snow water equivalent or considered for avalanche rescue. This technique is affordable, flexible, and provides accurate and continuous observations independent on weather conditions. However, the characteristics of GNSS observations for applications within a snow-pack still need to be further investigated. The magnitude of the main interaction processes involved for the GPS wavelength propagating through different layers of snow, ice or water is theoretically examined. Liquid water exerts the largest influence on GPS signal propagation through a snow-pack. Therefore, we focus on determining the characteristics of GNSS observables under water. An experiment was set-up to investigate the characteristics and limitations of submerged GPS observations using a pool, a level control by communicating pipes, a geodetic and a low-cost GPS antenna, and a water level sensor. The GPS antennas were placed into the water. The water level was increased daily by a step of two millimeters up to thirty millimeters above the antenna. Based on this experiment, the signal penetration depth, satellite availability, the attenuation of signal strength and the quality of solutions are analyzed. Our experimental results show an agreement with the theoretically derived attenuation parameter and signal penetration depth. The assumption of water as the limiting parameter for GPS observations within a snow-pack can be confirmed. Higher wetness in a snow-pack leads to less transmission, higher refraction, higher attenuation and thus a decreased penetration depth as well as a reduced quality of the solutions. In consequence, GPS applications within a snow-pack are heavily impacted by

  17. Survival after submergence in the pupae of five species of blow flies (Diptera: Calliphoridae).

    Science.gov (United States)

    Singh, D; Greenberg, B

    1994-09-01

    Survival of pupae of known ages after 1 to 5 d of submersion under water was assessed by determining the emergence of Protophormia terraenovae (Robineau-Desvoidy), Calliphora vicina (Robineau-Desvoidy), Cochliomyia macellaria (F.), Phormia regina (Meigen), and Phaenicia sericata (Meigen). Survival after 1 d of submergence was < 14% in the white puparial stage, 0-100% in pharate adults nearing eclosion, and approximately 100% in pupae between these two stages. This pattern inversely tracks O2 consumption during metamorphosis. Twenty-five percent of the pupae of three species (P. terraenovae, P. regina, and P. sericata) produced normal adults after 4 d of submersion, but none after 5 d. Among survivors, the pupation period was extended by the duration of submersion. Pupae of C. vicina were least able to withstand drowning. These data are potentially useful in estimating duration of submergence of a corpse in forensic investigations where the corpse becomes submerged after the larvae have developed and pupariated.

  18. Bioaccumulation of heavy metals by submerged macrophytes: looking for hyperaccumulators in eutrophic lakes.

    Science.gov (United States)

    Xing, Wei; Wu, Haoping; Hao, Beibei; Huang, Wenmin; Liu, Guihua

    2013-05-07

    To directly select submerged macrophytes with high accumulation capability from the field, 24 eutrophic lakes along the middle and lower reaches of the Yangtze River were investigated in the study. These eutrophic lakes have large amounts of heavy metals in both water and sediments because of human activities. The results showed that Najas marina is a hyperaccumulator of As and Cd, Ceratophyllum demersum is a hyperaccumulator of Co, Cr, and Fe, and Vallisneria natans is a hyperaccumulator of Pb. Strong positive correlations were found between concentrations of heavy metals in tissues of submerged macrophytes, probably because of coaccumulation of heavy metals. However, for most heavy metals, no significant correlations were found between submerged macrophytes and their surrounding environments. In conclusion, N. marina, C. demersum, and V. natans are good candidate species for removing heavy metals from eutrophic lakes.

  19. African Journals Online: Libya

    African Journals Online (AJOL)

    Libyan Journal of Medicine. The aim of the journal is to publish high quality medical data in the different discipline of medicine. It also aims at rapid publication via the advanced online publication. The journal is directed to clinicians and researcher around the globe. The scope of the journal covers all medical research and ...

  20. African Journals Online: Zimbabwe

    African Journals Online (AJOL)

    Items 1 - 12 of 12 ... African Journal of Social Work. The African Journal of Social Work is an international refereed journal that serves as a forum for exchanging ideas and knowledge and discussing issues relevant to social work practice, education and research in the African region. Producing 2 issues a year, the Journal is ...

  1. African Journals Online: Botswana

    African Journals Online (AJOL)

    Botswana Journal of Economics. The Botswana Journal of Economics is a professional journal established for the dissemination of contemporary economic issues–theoretical, methodological, and policy relevant–in the context of both the immediate environment and the wider international community. View Journal | Current ...

  2. African Journals Online (AJOL)

    African Journals Online (AJOL)

    In partnership with hundreds of journals from all over the continent, AJOL works to change this, so that African-origin research output is available to Africans and to the rest of the world. ... Featured Country: Nigeria, Featured Journal: Journal of Educational Foundations ... Journal of Agriculture and Social Research (JASR).

  3. African Journals Online (AJOL)

    African Journals Online (AJOL)

    In partnership with hundreds of journals from all over the continent, AJOL works to change this, so that African-origin research output is available to Africans and to the ... Featured Country: Nigeria, Featured Journal: Journal of Medicine and Medical Sciences ... International Journal of Engineering, Science and Technology.

  4. African Journals Online: Estonia

    African Journals Online (AJOL)

    PROMOTING ACCESS TO AFRICAN RESEARCH. AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES. African Journals Online: Estonia. Home > African Journals Online: Estonia. Log in or Register to get access to full text downloads. Username, Password, Remember me

  5. African Journals Online (AJOL)

    African Journals Online (AJOL)

    . Vol 7, No 1 (2017). African Journal of Oral Health. Vol 6, No 1 (2016). African Journal of Oral Health. Vol 35, No 1-2 (2017). Egyptian Journal of Biochemistry and Molecular Biology. Vol 7, No 3 (2017). African Journal of Chemical Education.

  6. African Journals Online: Ireland

    African Journals Online (AJOL)

    PROMOTING ACCESS TO AFRICAN RESEARCH. AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING AJOL · RESOURCES. African Journals Online: Ireland. Home > African Journals Online: Ireland. Log in or Register to get access to full text downloads. Username, Password, Remember me

  7. Anatomy Journal of Africa

    African Journals Online (AJOL)

    Journal Homepage Image. Anatomy Journal of Africa is the Official Journal for the Association of Anatomical Societies of Africa. This journal has its editorial office based at the department of Human Anatomy, University of Nairobi, and has biannual issues (January and July issues). We accept and publish a wide variety of ...

  8. African Journal of Urology

    African Journals Online (AJOL)

    The African Journal of Urology is the official journal of the Pan African Urological Surgeons' Association (PAUSA) The journal is a bilingual publication - publishing articles in English and French. The African Journal of Urology covers the whole scope of urology as well as the related basic sciences. In allignment with the ...

  9. Open Journal Systems

    African Journals Online (AJOL)

    This journal has not published any issues. ISSN: 0254-6299. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors. OTHER RESOURCES... Journal Quality · for Researchers · for Journals · for Authors · for Policy Makers · about Open Access · FAQ's · News · AJOL jobs · More about ...

  10. African Journal of Biotechnology

    African Journals Online (AJOL)

    Featured Country: Tanzania, Featured Journal: Dar Es Salaam Medical Students' Journal. PROMOTING ACCESS TO AFRICAN RESEARCH. AJOL · Journals · Advanced Search · FAQ's · Register. Username. Password. Remember me. or Register · Find Journals on AJOL. HOW TO USE AJOL... for Researchers · for ...

  11. Journalism Education in Canada.

    Science.gov (United States)

    MacDonald, Dick; Russell, Catharine

    Twenty-four of the 35 Canadian schools with formal journalism programs responded to a survey conducted to collect data about enrollment, curricula, faculty background in journalism, and the ability of journalism graduates to find jobs in the profession. Highlights of the results are as follows: there are an estimated 3,300 journalism students in…

  12. Journal of Cultural Studies

    African Journals Online (AJOL)

    Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. Journal Homepage Image. The Journal of Cultural Studies was established in 1999 as an independent tool for research development in Africa. It is published by the Nigerian Group for the Study of African Cultures (NIGSAC), a non-profit ...

  13. African Journals Online (AJOL)

    African Journals Online (AJOL)

    Sokoto Journal of Veterinary Sciences. Vol 25, No 2 (2017). IFE PsychologIA. Vol 29, No 1 (2017). Ergonomics SA. Vol 10, No 3 (2017). Ethiopian Journal of Science and Technology. Vol 15, No 3 (2016). Agro-Science. Vol 7, No 1 (2017). African Journal of Oral Health. Vol 6, No 1 (2016). African Journal of Oral Health.

  14. African Journals Online (AJOL)

    African Journals Online (AJOL)

    2018). SAHARA-J: Journal of Social Aspects of HIV/AIDS. Vol 20, No 10 (2017). Nigerian Journal of Clinical Practice. Vol 108, No 2 (2018). South African Medical Journal. Vol 21, No 1 (2018). Nigerian Journal of Clinical Practice. Vol 10, No 4 ...

  15. African Journals Online (AJOL)

    African Journals Online (AJOL)

    Vol 25, No 1 (2018). Tropical Journal of Health Sciences. Vol 30 (2017). Shakespeare in Southern Africa. Vol 28, No 1 (2018). Ethiopian Journal of Agricultural Sciences. Vol 15, No 1 (2018). SAHARA-J: Journal of Social Aspects of HIV/AIDS. Vol 20, No 10 (2017). Nigerian Journal of Clinical Practice. Vol 108, No 2 (2018).

  16. African Journals Online (AJOL)

    African Journals Online (AJOL)

    In partnership with hundreds of journals from all over the continent, AJOL works to change this, so that African-origin research output is available to Africans and to ... Featured Country: Ghana, Featured Journal: International Journal of Pedagogy, Policy and ICT in Education ... Tropical Journal of Pharmaceutical Research.

  17. South African Medical Journal

    African Journals Online (AJOL)

    The South African Medical Journal is published by the South African Medical Association, which represents most medical professionals in South Africa. Other websites related to this journal: http://www.samj.org.za/index.php/samj. Back issues of the journal from years 1886 - 2002 can be found on the journal's website under ...

  18. Nigerian Journal of Basic and Applied Sciences: About this journal

    African Journals Online (AJOL)

    Nigerian Journal of Basic and Applied Sciences: About this journal. Journal Home > Nigerian Journal of Basic and Applied Sciences: About this journal. Log in or Register to get access to full text downloads.

  19. Egyptian Journal of Medical Laboratory Sciences: About this journal

    African Journals Online (AJOL)

    Egyptian Journal of Medical Laboratory Sciences: About this journal. Journal Home > Egyptian Journal of Medical Laboratory Sciences: About this journal. Log in or Register to get access to full text downloads.

  20. Nigeria Journal of Pure and Applied Physics: About this journal

    African Journals Online (AJOL)

    Nigeria Journal of Pure and Applied Physics: About this journal. Journal Home > Nigeria Journal of Pure and Applied Physics: About this journal. Log in or Register to get access to full text downloads.

  1. Nigerian Journal of Pharmaceutical Research: About this journal

    African Journals Online (AJOL)

    Nigerian Journal of Pharmaceutical Research: About this journal. Journal Home > Nigerian Journal of Pharmaceutical Research: About this journal. Log in or Register to get access to full text downloads.

  2. African Journal of Health Professions Education: About this journal

    African Journals Online (AJOL)

    African Journal of Health Professions Education: About this journal. Journal Home > African Journal of Health Professions Education: About this journal. Log in or Register to get access to full text downloads.

  3. Scopus: Journal of East African Ornithology: About this journal

    African Journals Online (AJOL)

    Scopus: Journal of East African Ornithology: About this journal. Journal Home > Scopus: Journal of East African Ornithology: About this journal. Log in or Register to get access to full text downloads.

  4. Zagazig Journal of Occupational Health and Safety: About this journal

    African Journals Online (AJOL)

    Zagazig Journal of Occupational Health and Safety: About this journal. Journal Home > Zagazig Journal of Occupational Health and Safety: About this journal. Log in or Register to get access to full text downloads.

  5. Journal of Agricultural Research and Development: About this journal

    African Journals Online (AJOL)

    Journal of Agricultural Research and Development: About this journal. Journal Home > Journal of Agricultural Research and Development: About this journal. Log in or Register to get access to full text downloads.

  6. Western Indian Ocean Journal of Marine Science: About this journal

    African Journals Online (AJOL)

    Western Indian Ocean Journal of Marine Science: About this journal. Journal Home > Western Indian Ocean Journal of Marine Science: About this journal. Log in or Register to get access to full text downloads.

  7. UJAH: Unizik Journal of Arts and Humanities: About this journal

    African Journals Online (AJOL)

    UJAH: Unizik Journal of Arts and Humanities: About this journal. Journal Home > UJAH: Unizik Journal of Arts and Humanities: About this journal. Log in or Register to get access to full text downloads.

  8. African Journal of Drug and Alcohol Studies: About this journal

    African Journals Online (AJOL)

    African Journal of Drug and Alcohol Studies: About this journal. Journal Home > African Journal of Drug and Alcohol Studies: About this journal. Log in or Register to get access to full text downloads.

  9. Tropical Journal of Pharmaceutical Research: About this journal

    African Journals Online (AJOL)

    Tropical Journal of Pharmaceutical Research: About this journal. Journal Home > Tropical Journal of Pharmaceutical Research: About this journal. Log in or Register to get access to full text downloads.

  10. South African Journal of Clinical Nutrition: About this journal

    African Journals Online (AJOL)

    South African Journal of Clinical Nutrition: About this journal. Journal Home > South African Journal of Clinical Nutrition: About this journal. Log in or Register to get access to full text downloads.

  11. Journal of Science and Sustainable Development: About this journal

    African Journals Online (AJOL)

    Journal of Science and Sustainable Development: About this journal. Journal Home > Journal of Science and Sustainable Development: About this journal. Log in or Register to get access to full text downloads.

  12. Journal of the Ghana Institution of Engineers: About this journal

    African Journals Online (AJOL)

    Journal of the Ghana Institution of Engineers: About this journal. Journal Home > Journal of the Ghana Institution of Engineers: About this journal. Log in or Register to get access to full text downloads.

  13. East and Central African Journal of Surgery: About this journal

    African Journals Online (AJOL)

    East and Central African Journal of Surgery: About this journal. Journal Home > East and Central African Journal of Surgery: About this journal. Log in or Register to get access to full text downloads.

  14. Agricultural and Food Science Journal of Ghana: About this journal

    African Journals Online (AJOL)

    Agricultural and Food Science Journal of Ghana: About this journal. Journal Home > Agricultural and Food Science Journal of Ghana: About this journal. Log in or Register to get access to full text downloads.

  15. Southern Forests: a Journal of Forest Science: About this journal

    African Journals Online (AJOL)

    Southern Forests: a Journal of Forest Science: About this journal. Journal Home > Southern Forests: a Journal of Forest Science: About this journal. Log in or Register to get access to full text downloads.

  16. Science, Technology and Arts Research Journal: About this journal

    African Journals Online (AJOL)

    Science, Technology and Arts Research Journal: About this journal. Journal Home > Science, Technology and Arts Research Journal: About this journal. Log in or Register to get access to full text downloads.

  17. Arab Journal of Nephrology and Transplantation: About this journal

    African Journals Online (AJOL)

    Arab Journal of Nephrology and Transplantation: About this journal. Journal Home > Arab Journal of Nephrology and Transplantation: About this journal. Log in or Register to get access to full text downloads.

  18. Eastern Africa Journal of Rural Development: About this journal

    African Journals Online (AJOL)

    Eastern Africa Journal of Rural Development: About this journal. Journal Home > Eastern Africa Journal of Rural Development: About this journal. Log in or Register to get access to full text downloads.

  19. Journal of Computer Science and Its Application: About this journal

    African Journals Online (AJOL)

    Journal of Computer Science and Its Application: About this journal. Journal Home > Journal of Computer Science and Its Application: About this journal. Log in or Register to get access to full text downloads.

  20. Lagos Journal of Library and Information Science: About this journal

    African Journals Online (AJOL)

    Lagos Journal of Library and Information Science: About this journal. Journal Home > Lagos Journal of Library and Information Science: About this journal. Log in or Register to get access to full text downloads.