WorldWideScience

Sample records for sublittoral sand spit

  1. Sand and gravel spits

    CERN Document Server

    Randazzo, Giovanni; Cooper, J Andrew G

    2015-01-01

    This book draws together a series of studies of spit geomorphology and temporal evolution from around the world. The volume offers some unique insights into how these landforms are examined scientifically and how we as humans impact them, offering a global perspective on spit genesis and evolution. Spits are unique natural environments whose evolution is linked to the adjacent coast and near shore morphology, sediment supply, coastal dynamics and sea-level change. Over the past century, Global Mean Sea Level (GMSL) has risen by 10 to 20 centimetres and many coastal spits represent the first sentinel against coastal submersion. Scientific research indicates that sea levels worldwide have been rising at a rate of 3.5 millimetres per year since the early 1990s, roughly twice the average speed of the preceding 80 years. This trend, linked to global warming will undoubtedly cause major changes in spit morphology. Spits are highly mobile coastal landforms that respond rapidly to environmental change. They therefore...

  2. Sublittoral sand dollar (Echillodiscus bisperforatus) communities in ...

    African Journals Online (AJOL)

    *To whom cnrrespondence should he addressed. **Prc~cnt Jddrcss: Sea hsheries Research Institute, Privsand communities and a numher of morphologically simi- lar species inhabit a variety of relatively sheltered habitats.

  3. Sublittoral sand dollar ( Echinodiscus bisperforatus ) communities in ...

    African Journals Online (AJOL)

    Macrofauna, meiofauna and sediment parameters together with sand dollar abundance and distribution were recorded along transects with stations at 2 m depth intervals from 4 m to 12 m. A wave-induced, depth-related turbulence gradient was evident with both mean particle size and sediment sorting decreasing with ...

  4. Stability of a sand spit due to dredging in an adjacent creek

    Digital Repository Service at National Institute of Oceanography (India)

    Patgaonkar, R.S.; Ilangovan, D.; Vethamony, P.; Babu, M.T.; Jayakumar, S.; Rajagopal, M.D.

    , but maintaining the spit intact. For this, the stability of sand spit is studied with different criteria. The results confirm that the creek mouth is a near permanent zone of deposition. The model results obtained for various depth scenarios show...

  5. Faunistic assemblages of a sublittoral coarse sand habitat of the northwestern Mediterranean

    Directory of Open Access Journals (Sweden)

    Eva Pubill

    2011-02-01

    Full Text Available The sublittoral megabenthic assemblages of a northwestern Mediterranean coarse sandy beach exploited for the bivalve Callista chione were studied. The spatial and bathymetric variability of its distinctive faunal assemblages was characterised by quantitative sampling performed with a clam dredge. The taxa studied were Mollusca Bivalvia and Gastropoda, Crustacea Decapoda, Echinodermata and Pisces, which accounted for over 99% of the total biomass. Three well-differentiated species assemblages were identified: (1 assemblage MSS (Medium Sand Shallow in medium sand (D50=0.37 mm and shallow waters (mean depth =6.5 m, (2 assemblage CSS (Coarse Sand Shallow in coarse sand (D50=0.62 mm in shallow waters (mean depth =6.7 m, and (3 assemblage CSD (Coarse Sand Deep in coarse sand (D50=0.64 mm in deeper waters (mean depth =16.2 m. Assemblage MSS was characterised by the codominance of the bivalves Mactra stultorum and Acanthocardia tuberculata. C. chione was dominant in both density and biomass in assemblages CSS and CSD. The occurrence of the crab Thia scutellata also characterised assemblage CSS, whereas the occurrence of the sea urchin Echinocardium mediterraneum characterised assemblage CSD. A depth breaking point of around 10 m determined the discontinuity between assemblages CSS and CSD, which was related to the closure depth of the beaches in the study area. Species richness was highest in the coarse sand communities; however, Shannon-Wiener diversity and Pielou equitability indexes were higher in the shallow fine sand community.

  6. The Soil-Land use System in a Sand Spit Area in the Semi-Arid ...

    African Journals Online (AJOL)

    komla

    system (ISSS/ISRIC/FAO, 1998) a Solonet, and according to Soil Taxonomy (Soil Survey Staff, 1998), a. Natraqualf. They occupy the greater part of the flat, poorly drained areas adjoining the Keta Lagoon. The. Keta soil series occupies the scattered sandbars in the marsh area and the large narrow Keta sand spit along the ...

  7. The Soil-Land use System in a Sand Spit Area in the Semi-Arid ...

    African Journals Online (AJOL)

    The development and sustainability of a horticultural system at the Keta sand spit in south-eastern Ghana is described and discussed. The main crop is shallot grown on pure sandy soils in a semi-arid climate. It is a cash crop system highly dependent on a substantial input of manure and irrigation water from a shallow ...

  8. Sand spit and shoreline dynamics near Terekhol river mouth, Goa, India

    Digital Repository Service at National Institute of Oceanography (India)

    Rajasekaran, C.; Jayakumar, S.; Gowthaman, R.; Jishad, M.; Yadhunath, E.M; Pednekar, P.S.

    up to 2010 A sand spit of 2m height has been stabilized in 2012 during monsoon in the southern bank of the river which obstructs the natural flow of the river and also hindrance to the ferry transport system This leads to the unbalanced scenario...

  9. Density-lag anomaly patterns in backshore sands along a paraglacial barrier spit

    Science.gov (United States)

    Pupienis, Donatas; Buynevich, Ilya; Jarmalavičius, Darius; Fedorovič, Julija; Žilinskas, Gintautas; Ryabchuk, Daria; Kovaleva, Olga; Sergeev, Alexander; Cichon-Pupienis, Anna

    2016-04-01

    The Curonian Spit, located along the southeast Baltic Sea coast, is one of the longest paraglacial mega-barriers in the world (~100 km) and is characteried by microtidal sandy beaches and unbroken foredune ridge emplaced by human activities in historical times. Both are dominated by quartzo-feldpathic sand, with various fractions of heavy minerals that may be concentrated as density lag. Such heavy-mineral concentrations (HMCs) may be distributed weither randomly or regularly along the coast, depending on the geological framework, hydro-aeolian processes, and human activities (e.g., steel elements of coastal engineering structures, military installations, etc.). In this study, we focus on the longshore patterns in HMC distribution and relative magnitude (mainly the concentration of ferrimagnetic components). Along the entire Curonian Spit coast (Russia-Lithuania), a total of 184 surface sand samples were collected at 1 km interval from the berm and foredune toe (seaward base). HMCs were characterized in the laboratory using bulk low-field magnetic susceptibility (MS). The Wavelength and Lomb spectral analysis were used to assess the spatial rhythmicity of their longshore distribution. Generally, quartz sand is characterised by low MS values of ĸ150 μSI are typical for heavy mineral-rich sand. MS values on the berm and foredune toe range from 11.2-4977.9 μSI and from 9.2-3153.0 μSI, respectively. Density lag anomalies had MS values exceeding an average value by ≥3 times. Wavelength and Lomb spectral analysis allowed to identify several clusters of periodicities with wavelength varying from 2-12 km, with power spectra having statistically significant values (>95 % CI). Along the modern Curonian Spit coast, two scales of rhythmic pattern variation are evident: macroscale (≤12 km) and mesoscale (2-3 km). The former can be attributed to localized expressions of geological framework (iron-rich components) and engineering structures (especially within the southern

  10. Decadal changes in North Atlantic atmospheric circulation patterns recorded by sand spits since 1800 CE

    Science.gov (United States)

    Poirier, Clément; Tessier, Bernadette; Chaumillon, Éric; Bertin, Xavier; Fruergaard, Mikkel; Mouazé, Dominique; Noël, Suzanne; Weill, Pierre; Wöppelmann, Guy

    2017-03-01

    Present-day coastal barriers represent around 15% of the world's oceanic shorelines, and play an important role as early warning indicators of environmental change. Among them, wave-dominated barriers are dynamic landforms that tend to migrate landward in response to storms and sea-level change. High rates of sediment supply can locally offset the global retrogradation trend, providing valuable records of past environmental change occurring on transgressive coasts. However, geochronological control limits the temporal resolution of such records to millennial or centennial timescales, and the decadal or even faster response of wave-built barriers to historical climate changes is therefore poorly understood. In this study, we show that shoreline dynamics of sand spits reconstructed from old cartographic documents has been synchronous on both margins of the North Atlantic Ocean since about 1800 CE. Spit growth accelerated drastically during three periods lasting about 15 years, characterised by positive North Atlantic Oscillation (NAO) and negative East Atlantic-West Russia (EA-WR) atmospheric circulation patterns. These changes are in phase with periods of increased volcanic activity. We use a high-resolution wave hindcast (1948-2014 CE) in a reference area to confirm the association between NAO and EA-WR as a proxy for offshore and nearshore wave height and for associated longshore sediment transport (LST) involved in spit growth. A 24-month lagged correlation between sediment transport and volcanic aerosol optical thickness (concentration of ashes in the atmosphere) is observed, suggesting that spit shoreline dynamics at the decadal timescale is partially forced by external climate drivers via cascading effects on atmospheric circulation patterns and wave climate. Our results imply that NAO variability alone is not sufficient to understand the evolution of wave-built coastal environments. The associated sediment record can be used to reconstruct multi

  11. Dredging of sand from a creek adjacent to a sand-spit for reclamation: Its impact on spit stability and coastal zone

    Digital Repository Service at National Institute of Oceanography (India)

    Rajagopal, M.D.; Vethamony, P.; Ilangovan, D.; Jayakumar, S.; Sudheesh, K.; Murty, K.S.R.

    bed as fill material for reclamation of a low lying land. MIKE 21 hydrodynamic model was run to evaluate the change in flow pattern due to altered bathymetry, and GALENA to analyse the stability of a spit adjacent to the creek. JMC is a region...

  12. The Soil-Land use System in a Sand Spit Area in the Semi-Arid ...

    African Journals Online (AJOL)

    komla

    Particle size distribution was determined by sieving sand fractions and using the hydrometer method for ... Yields per square metre were determined at the end of the growing season. The quality of the irrigation water. (electrical conductivity) was determined directly in the .... 2–3 kg per m2 or about 10–15 times in return.

  13. What's Spit?

    Science.gov (United States)

    ... also helps the tongue by allowing you to taste. A dry tongue can't tell how things taste — it needs saliva to keep it wet. Spit ... For Parents MORE ON THIS TOPIC What Are Taste Buds? Word! Saliva Dehydration Your Tongue Senses Experiment: ...

  14. Spitting up - self-care

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/patientinstructions/000754.htm Spitting up - self-care To use the sharing features on ... 7 to 12 months old. Why Babies Spit up Your baby is spitting up because: The muscle ...

  15. Spitting Up in Babies

    Science.gov (United States)

    ... in the stomach comes back up into your baby’s esophagus. The esophagus is the tube that connects the mouth and the stomach.Spitting up is not the same as vomiting. Babies usually don’t notice when they spit up. ...

  16. Transport and degradation of a dinoflagellate bloom in permeable sublittoral sediment

    NARCIS (Netherlands)

    Huettel, M.; Cook, P.; Janssen, F.; Lavik, G.; Middelburg, J.J.

    2007-01-01

    Filtration of planktonic algal cells from the water column into permeable sublittoral sediment and the fate of the cells in the shallow sands were studied during a red tide produced by the dinoflagellate Peridinella catenata at Hel Peninsula/Baltic in May 2004. Advective porewater flows associated

  17. Episodes of aeolian sand movement on a large spit system (Skagen Odde, Denmark) and North Atlantic storminess during the Little Ice Age

    DEFF Research Database (Denmark)

    Clemmensen, Lars B; Glad, Aslaug Clemmensen; Hansen, Kristian W T

    2015-01-01

    recognized. Optically stimulated luminescence (OSL) dating indicates that aeolian sand movement took place in four phases: around AD 1460, between AD 1730 and 1780, around AD 1870, and since about AD 1935. The first phase of sand movement occurred during cooling in the first part of the Little Ice Age...... movement during the Little Ice Age also took place in periods of increased storminess, but during these events it appears that negative NAO values were coupled with positive AMO values. The final phase of sand movement is intimately linked to the modern formation of frontal dunes which takes place during...... moderate storminess. These findings are important as they indicate three major periods of aeolian sand movement and storminess during the Little Ice Age...

  18. Episodes of aeolian sand movement on a large spit system (Skagen Odde, Denmark) and North Atlantic storminess during the Little Ice Age

    DEFF Research Database (Denmark)

    Clemmensen, Lars B.; Glad, Aslaug C.; Hansen, Kristian W. T.

    2015-01-01

    recognized. Optically stimulated luminescence (OSL) dating indicates that aeolian sand movement took place in four phases: around AD 1460, between AD 1730 and 1780, around AD 1870, and since about AD 1935. The first phase of sand movement occurred during cooling in the first part of the Little Ice Age...... movement during the Little Ice Age also took place in periods of increased storminess, but during these events it appears that negative NAO values were coupled with positive AMO values. The final phase of sand movement is intimately linked to the modern formation of frontal dunes which takes place during...... moderate storminess. These findings are important as they indicate three major periods of aeolian sand movement and storminess during the Little Ice Age....

  19. The Skallingen spit, Denmark

    DEFF Research Database (Denmark)

    Bartholdy, Jesper; Brivio, Lara; Bartholdy, Anders

    2017-01-01

    The formation and evolution of a modern saltmarsh platform on the barrier spit Skallingen in the northernmost part of the Wadden Sea was investigated through historical map records, 12 orthophotos covering the period from 1945 to 2012, sediment cores and cross-sectional creek profiles. The barrie...

  20. Overwash Processes and Foredune Ecology, Nauset Spit, Massachusetts.

    Science.gov (United States)

    1984-12-01

    season (Woodhouse, 1978). Ranwell (1958), in his study on British dunes, stated that while Anmmophila arenaria (European beachgrass) can recover from...through I deep sand burial, but by sand supply or the limited surface area which a plant has to trap windblown sand. Ammophila arenaria has repeatedly been...overwash burial at the three study sites on Nauset Spit-Eastham in 1977 and 1978. Three dune species, Agpopyron pungens, Artemisia caudata, and Carex silicea

  1. The Dynamics of Cuspate Spits at Geological Time Scale

    Science.gov (United States)

    Bouchette, F.; Manna, M.; Camps, N.; Mohammadi, B.

    2016-12-01

    Zenkovitch (1959) first described cuspate spits as a limited category of shore-connected features that result from symmetrical wind/ wave forcings and/ or peculiar initial shore configuration. Later on, Asthon et al. (2001) and Asthon and Murray (2006) proned that cuspate spits, flying spits and other shoreline features derive from instabilities inherent in the relationship between alongshore sediment transport and local shoreline orientation. They exhibited a comprehensive weakly non-linear theory for cuspate and spit dynamics, and gave a striking numerical solutions to the problem. Recently, Bouchette et al. (2014) provided an alternative explicit formulation for the growth of cuspate spits through time. From this last formulation, it was demonstrated that there exists an exact relationship between the amplitude, the length of a cuspate on one side, and the longshore diffusivity and the time on the other side. In the present work, we explore how this relationship can be used to predict various coastal characteristics at decadal/geological time scales as soon as a cuspate develops in the area concerned. This formulation can be considered as a method for the datation of a cuspate spit. Alternatively, it can allow to estimate the mean fluxes of sediment trapped along the shore. The model is validated thanks to a comparison with observed cuspates. The cuspate law suggests that the length of the cuspate and its amplitude may be related through a power law (to the power of three). We demonstrate that this power law is not a simple mathematical result but does exist in the nature. The occurrence of a power law suggests also that more underlying physics remain to be analysed in the process of nucleation and growth of cuspate spits.Asthon, A., Murray, B., 2006. High-angle wave instability and emergent shoreline shapes: 1) modeling of sand waves, flying spits and capes. Journal of Geophysical Research, 111, F04011. Asthon, A., Murray, B., Arnault, O., 2001. Formation of

  2. Spitting up in Babies: What's Normal, What's Not

    Science.gov (United States)

    ... t gaining weight Spits up forcefully Spits up green or yellow fluid Spits up blood or a ... 2015 Original article: http://www.mayoclinic.org/healthy-lifestyle/infant-and-toddler-health/in-depth/healthy-baby/ ...

  3. Modelling the morphology of sandy spits

    DEFF Research Database (Denmark)

    Pedersen, Dorthe; Deigaard, Rolf; Fredsøe, Jørgen

    2008-01-01

    The shape, dimensions and growth rate of an accumulating sandy spit is investigated by a theoretical and experimental study. The idealised case of a spit growing without change of form under a constant wave forcing is considered. The longshore wave-driven sediment transport is taken to be dominan...

  4. Spatial patterns in heavy-mineral concentrations along the Curonian Spit coast, southeastern Baltic Sea

    Science.gov (United States)

    Pupienis, Donatas; Buynevich, Ilya; Ryabchuk, Daria; Jarmalavičius, Darius; Žilinskas, Gintautas; Fedorovič, Julija; Kovaleva, Olga; Sergeev, Alexander; Cichoń-Pupienis, Anna

    2017-08-01

    The 98-km-long Curonian Spit is fronted by beaches mainly composed of quartz sand with minor high-density fractions. In this study heavy-mineral concentration (HMC) trends and grain-size statistical parameters were used to assess their role as indicators of natural processes, human activities, and patterns of longshore transport. A total of 92 surface sand samples were collected at 1 km intervals from the middle of the beach along the Baltic Sea shoreline of the spit between Klaipėda strait in Lithuania and Zelenogradsk in Russia. HMC contribution was assessed in the laboratory using bulk low-field magnetic susceptibility (MS) as a proxy for ferrimagnetic and paramagnetic mineral content. Quartz-dominated (background) sand is generally characterized by low MS values of κ 150 μSI are typical for heavy-mineral-rich sand. The greatest MS values along the middle of the beach occur in the southern part of the spit and are 40 times higher than in the northern sector. This pattern suggests the existence of a longshore particle flux with HMC distribution having the potential as a useful tracer of longshore sediment transport. Local anomalously high MS excursions are associated with contribution of iron-rich materials from adjacent man-made structures. Therefore, temporally constrained HMC distribution along the middle of the beach reflects the cumulative effect of antecedent geologic framework, longshore sediment transfer, erosional and accretionary processes, wave and wind climate, and local coastal protective structures.

  5. Molluscan diversity along a Mediterranean soft bottom sublittoral ecotone

    Directory of Open Access Journals (Sweden)

    Panayota Koulouri

    2006-12-01

    Full Text Available Molluscan diversity associated with sublittoral soft-bottoms was studied in Heraklion Bay as part of a long-term multidisciplinary research programme in the coastal environment of northern Crete (eastern Mediterranean. Quantitative benthic samples were collected in a pilot survey from a grid of 28 stations, followed by a seasonal sampling carried out over a seven- station transect located from 10 to 40 m depth. Univariate and multivariate analyses indicated the presence of a clear zonation along the depth gradient for the molluscan fauna and three main associations were identified in bathymetric zones parallel to the coastline. The structure of the local molluscan communities revealed the existence of an extended transition zone (ecotone between a shallow sandy association and a deeper muddy one and a functional pattern, based on the feeding guilds, was evident along the environmental gradient. Application of graphical techniques, by using molluscan taxocoenosis, indicated a rather naturally disturbed habitat. Beta-diversity measures indicated different seasonal community adaptations to the prevailing environmental conditions. Results derived from this study revealed that beta-diversity may be a good descriptor for the assessment of the strength and breadth of sublittoral transition zones along environmental gradients.

  6. Analyses of venom spitting in African cobras (Elapidae: Serpentes ...

    African Journals Online (AJOL)

    The venom spat by four spitting cobras (Naja nigricollis, N. pallida, N. mossambica and Hemachatus haemachatus) was caught using perspex plates. Densiometric analysis of the spat venom revealed low levels of variation in volume among successive spits. The dispersal patterns formed by the spat venom were divided ...

  7. Compulsive spitting as manifestation of temporal lobe epilepsy.

    NARCIS (Netherlands)

    Renier, W.O.

    2004-01-01

    Spitting as a seizure manifestation is described in an autistic child with a mild expression of epilepsy. Spitting became a predominant automatism of in seizure manifestation. In contrast to most cases in the literature, the epileptic discharges were localized in the left temporal lobe, an uncommon

  8. Discovery Of Human Antibodies Against Spitting Cobra Toxins

    DEFF Research Database (Denmark)

    Bojsen-Møller, Laura; Lohse, Brian; Harrison, Robert

    spitting cobras are among the most medically important snakes in sub-Saharan regions due to the severity of the clinical outcomes caused by their cytotoxic venom, which is derived from cytotoxins of the 3FTx toxin family and PLA2. Here we report the results of our progress in identifying human antibodies...... targeting relevant toxins from the venom of the black necked spitting cobra (Naja nigricolis)....

  9. Efficient photoreactivation of UVBR-induced DNA damage in the sublittoral macroalga Rhodymenia pseudopalmata (Rhodophyta)

    NARCIS (Netherlands)

    Pakker, H; Beekman, C.A C; Breeman, Arno

    Repair of DNA damage induced by ultraviolet-B radiation (UVBR) was investigated in the sublittoral red alga Rhodymenia pseudopalmata at different temperatures, using immunofluorescent detection of thymine dimers. Photoreactivation of thymine dimers was completed within about 3 h at 6, 12 and 18

  10. Intensity of geodynamic processes in the Lithuanian part of the Curonian Spit

    Directory of Open Access Journals (Sweden)

    A. Česnulevičius

    2017-06-01

    Full Text Available The paper considers conditions and intensity of aeolian and dune slope transformation processes occurring in the wind-blown sand strips of the dunes of the Curonian Spit. An assessment of the intensity of aeolian processes was made based on the analysis of climatic factors and in situ observations. Transformations in aeolian relief forms were investigated based on the comparison of geodetic measurements and measurements of aerial photographs. Changes in micro-terraces of dune slopes were investigated through comparison of the results of repeated levelling and measurements of aerial photographs. The periods of weak, medium, and strong winds were distinguished, and sand moisture fluctuations affecting the beginning of aeolian processes were investigated. The wind-blown sand movements were found to start when sand moisture decreased by 2 % in the surface sand layer and by up to 5 % at a depth of 10 cm. In 2004–2016, the wind-blown sand movements affected the size of reference deflation relief forms: scarp length by 8 %, scarp width by 35 %, pothole length by 80 %, pothole width by 80 %, roll length by 17 %, roll width by 18 %, hollow length by 17 %, and hollow width by 39 %. The elementary relief forms in the leeward eastern slopes of the dunes experienced the strongest transformations. During a period of 5 months, the height of micro-terraces of the eastern slope of the Parnidis Dune changed from 0.05 to 0.64 cm. The change was related to fluctuations in precipitation intensity: in July–August 2016 the amount of precipitation increased 1.6-fold compared with the multiannual average, thus causing the change in the position of terrace ledges by 21 %.

  11. Morpho-dynamic evolution of Ekakula spit of Odisha coast, India using satellite data

    Digital Repository Service at National Institute of Oceanography (India)

    ManiMurali, R.; Vethamony, P.

    This spit triggers interests to the coastal managers and environmentalists because of its nature Multi-temporal satellite images (1999-2009) were used to study the Morpho-dynamic evolution of this spit Results show that the spit grows towards northeast...

  12. Chewing and spitting out food in eating disorder.

    Science.gov (United States)

    De Zwaan, M

    1997-01-01

    The case of a 19-year-old woman with an eating disorder is presented, whose prime symptom was chewing and spitting out food. She intentionally chose this behaviour as the best strategy to avoid gaining weight while enjoying the taste of large quantities of food. (IntJ Psych Clin Pract 1997; 1: 37-38).

  13. Dispersants as used in response to the MC252-Spill Lead to higher mobility of polycyclic aromatic hydrocarbons in oil-contaminated Gulf of Mexico sand

    NARCIS (Netherlands)

    Zuijdgeest, A.; Huettel, M.

    2012-01-01

    After the explosion of the Deepwater Horizon oil rig, large volumes of crude oil were washed onto and embedded in the sandy beaches and sublittoral sands of the Northern Gulf of Mexico. Some of this oil was mechanically or chemically dispersed before reaching the shore. With a set of

  14. Rapid formation of large coastal sand bodies after emplacement of Magdalena river jetties, northern Colombia

    Science.gov (United States)

    Martinez, J. O.; Pilkey, O. H.; Neal, W. J.

    1990-11-01

    The Magdalena River is noted for its high discharge of river sediment and its importance as the sediment source for a large delta complex and downdrift coastal sand bodies. The emplacement of jetties, completed in 1935 to stabilize the river mouth, contributed to major changes in the downstream coastal sand bodies. The western delta front retreated an average 65 m/yr. Puerto Colombia spit detached and migrated toward Puerto Colombia at rates of 230 430 m/yr, ultimately running into the town's quay and port facility. Galerazamba spit alternately elongated and shortened over the short term, leading to the destruction or damage of coastal town sites. Isla Cascajo acted as a significant sand trap with nearly 12 km2 of accretion over a 47-year period. Sand is now bypassing the tombolo, and the accretion zone continues migrating southwest. The small Punta Canaos spit also has shown significant accretion since 1974. The changes imply high rates of sediment transport; furthermore their growth is probably dependent on jetty-caused alterations of wave patterns, causing remobilization of shelf sands as well as delta-derived sand. Understanding sand body evolution and behavior is important to future development of the northern Colombia coast. Placement of port facilities, recreational beaches, tourist villages, and related support facilities on these sand bodies, as well as utilizing the sand bodies for aggregate, beach nourishment sands for other areas, or heavy mineral resources will require significant planning.

  15. Spitting Image and Pre-Televisual Political Satire : Graphics and Puppets to Screens

    NARCIS (Netherlands)

    Brillenburg Wurth, C.A.W.

    2011-01-01

    In this article, I read the satire TV show "Spitting Image" as a virtual archive of eighteenth-century and nineteenth-century graphic satire (John Gillray, George Cruikshank) and nineteenth-century street puppet-theatre (Punch and Judy). Though innovative as satire TV, "Spitting Image" remediated

  16. Chewing and spitting out food as a compensatory behavior in patients with eating disorders.

    Science.gov (United States)

    Song, Youn Joo; Lee, Jung-Hyun; Jung, Young-Chul

    2015-10-01

    Recent studies suggest that chewing and spitting out food may be associated with severe eating-related pathology. The purpose of this study was to investigate the relationship between chewing and spitting, and other symptoms of eating disorders. We hypothesized that patients who chew and spit as a compensatory behavior have more severe eating-related pathology than patients who have never engaged in chewing and spitting behavior. We divided 359 patients with eating disorders into two groups according to whether they engaged in chewing and spitting as a compensatory behavior to lose weight or not. After comparing eating-related pathology between the two groups, we examined factors associated with pathologic eating behaviors using logistic regression analysis. Among our 359 participants, 24.5% reported having engaged in chewing and spitting as a compensatory behavior. The chewing and spitting (CHSP+) group showed more severe eating disorder symptoms and suicidal behaviors. This group also had significantly higher scores on subscales that measured drive for thinness, bulimia, and impulse regulation on the EDI-2, Food Craving Questionnaire, Body Shape Questionnaire, Beck Depression Inventory, Beck Anxiety Inventory, and Maudsley Obsessive Compulsive Inventory. Chewing and spitting is a common compensatory behavior among patients with eating disorders and is associated with more-pathologic eating behaviors and higher scores on psychometric tests. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. Critical storm thresholds for the generation of significant dune erosion at Dziwnow Spit, Poland

    Science.gov (United States)

    Furmańczyk, K. K.; Dudzińska-Nowak, J.; Furmańczyk, K. A.; Paplińska-Swerpel, B.; Brzezowska, N.

    2012-03-01

    Storm influence on the southern Baltic coast was examined for a 14-km long section of the Polish coast along the Dziwnow Spit based on 30 years of post-storm dune erosion observations. In this study, we assumed that a significant storm causes noticeable sand dune erosion. Significant changes of the coast after each major storm were analysed based on reports from 1978 to 2008 provided by the Maritime Office, Szczecin. Thirty-two storms that caused dune losses were chosen for analysis. Correlation and hierarchical cluster analysis allowed us to distinguish three groups of storms that caused varying amounts of dune erosion: G1 (small), G2 (medium), and G3 (large). Sea level is the main parameter that influences the amount of dune erosion caused by storms on the southern Baltic coast. Factors such as maximum significant wave height, mean wave direction, storm energy and duration can also, but less significantly, influence dune erosion. The study area was divided into two sections: Dziwnow, where there are many protection measures in place, and Miedzywodzie, which has no protection measures in place. In both areas, we observed differences in the impact of sea level and significant wave height and storm groupings. Approximate minimum sea level and significant wave height thresholds were defined for particular storm groups.

  18. Amino acid racemization analysis (AAR) as a successful tool for dating Holocene coastal sediments: Stratigraphy of a barrier island spit (Southern Sylt/North Sea)

    Science.gov (United States)

    Tillmann, Tanja; Ziehe, Daniel

    2014-05-01

    Dating of Holocene sediments in shallow coastal areas of the German North Sea by conventional techniques is commonly problematic. In particular the marine reservoir effect of radiocarbon means that radiocarbon dating cannot be applied to sediments younger than about 400 years. Amino acid racemization dating (AAR) is a viable alternative for dating young sediments. The method is based on the determination of ratios of D and L amino acid enantiomers in organic matrices of biogenic carbonates. In this study we use AAR as a tool for dating Holocene barrier islands sediments. Based on an AAR derived chronological framework we develop a model of barrier spit accretion which describes the interaction between extreme events, fair weather coastal processes and sedimentary development that constrains the major episodes of barrier island evolution. The stratigraphy was defined using ground-penetrating radar (GPR) surveys complemented by sedimentological coring data. The stratigraphy is then conceptualised in a AAR chronostratigraphic framework to define a chronological order and allow the development of a stratigraphic model of the evolution of Southern Sylt. The AAR data provide high temporal resolution and have been used for dating stages of barrier spit accretion. The time lines are marked as storm surge generated erosion unconformities in the stratigraphic profile. Individual shells and shell fragments of Cerastoderma edule, Mya arenaria, Mytilus edulis and Scrobicularia plana have been accumulated by short-term storm events as shell layers associated with the erosion unconformities and have been dated by AAR. Time lines reveal that the barrier spit accretion occurred episodically, and is dependant on the provided rate of sand delivery. The general trend is that sequences young to the. South. The AAR derived time lines have been verified and correlated by historic maps and sea charts. It is apparent that spit enlargement at this site increased significantly during the

  19. Fontainebleau Sand

    DEFF Research Database (Denmark)

    Leth, Caspar Thrane

    2006-01-01

    The report is a summary of results from laboratory tests in the geotechncial research group on Fontainebleau sand.......The report is a summary of results from laboratory tests in the geotechncial research group on Fontainebleau sand....

  20. Functional diversity of marine macrobenthic communities from sublittoral soft-sediment habitats off northern Chile

    Science.gov (United States)

    Pacheco, Aldo S.; González, Maria Teresa; Bremner, Julie; Oliva, Marcelo; Heilmayer, Olaf; Laudien, Jürgen; Riascos, José M.

    2011-09-01

    Benthic communities show changes in composition and structure across different environmental characteristics and habitats. However, incorporating species biological traits into the analysis can provide a better understanding of system functioning within habitats. We compare the functional diversity of macrobenthic communities from a contrasting shallow (15 m) and deep (50 m) sublittoral soft-sediment habitats in northern Chile, using biological traits analysis. Our aim was to highlight the biological characteristics responsible for differences between habitats and the implications for ecosystem functioning. Trait analysis showed that the deep habitat was restricted in providing functionally important biogenic structure and bioturbation and supports less diverse feeding-related energy pathways. The shallow habitat is characterized by more diverse energy pathways and a higher potential for matter exchange through bioturbation. We provide support to the predictions of transfer of energy from the benthos to upper trophic levels in the shallow, which is characterized mainly by normoxia and little organic matter content in the sediment. In the deep habitat, characterized by hypoxia and more organic matter, energy appears to be transferred to microbial components. We suggest that trait analysis should be added to the traditional approaches based on species diversity, because it provides indicators of ecosystem stress.

  1. Analyses of sublittoral macrobenthic community change in a marine nature reserve using similarity profiles (SIMPROF).

    Science.gov (United States)

    Somerfield, P J; Burton, M; Sanderson, W G

    2014-12-01

    Sublittoral macrobenthic communities in the Skomer Marine Nature Reserve (SMNR), Pembrokeshire, Wales, were sampled at 10 stations in 1993, 1996, 1998, 2003, 2007 and 2009 using a Day grab and a 0.5 mm mesh. The time series is analysed using Similarities Profiles (SIMPROF) tests and associated methods. Q-mode analysis using clustering with Type 1 SIMPROF addresses multivariate structure among samples, showing that there is clear structure associated with differences among years. Inverse (r-mode) analysis using Type 2 SIMPROF decisively rejects a hypothesis that species are not associated with each other. Clustering of the variables (species) with Type 3 SIMPROF identifies groups of species which covary coherently through the time-series. The time-series is characterised by a dramatic decline in abundances and diversity between the 1993 and 1996 surveys. By 1998 there had been a shift in community composition from the 1993 situation, with different species dominating. Communities had recovered in terms of abundance and species richness, but different species dominated the community. No single factor could be identified which unequivocally explained the dramatic changes observed in the SMNR. Possible causes were the effects of dispersed oil and dispersants from the Sea Empress oil spill in February 1996 and the cessation of dredge-spoil disposal off St Annes Head in 1995, but the most likely cause was severe weather. With many species, and a demonstrable recovery from an impact, communities within the SMNR appear to be diverse and resilient. If attributable to natural storms, the changes observed here indicate that natural variability may be much more important than is generally taken into account in the design of monitoring programmes. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Moon phase effects and timing of emerging macrobenthic assemblages in a sheltered soft-bottom sublittoral habitat

    Science.gov (United States)

    Pacheco, Aldo S.; Gómez, Gonzalo E.; Santoro, Pablo A.; Malebran, Maritza; Cortés, Cynthia; Riascos, José M.

    2014-02-01

    Several species of benthic macro and meio-invertebrates actively emerge from the seabed to the water column during the night. Such diel vertical migrations have important consequences for benthic-pelagic coupling, dispersal, connectivity and recovery after disturbance of benthic assemblages. However, this process has never been studied in the coast of the Humboldt Current ecosystem. Herein we examined the relationship between the emerging assemblage and moon phases (and co-variables) and the timing of emergence during the day/night cycle, in a sublittoral soft-bottom habitat. Sampling using emergence traps was conducted at 7 m depth in the zone of Bolsico, a sheltered cove with low bottom hydrodynamics in northern Chile. Multivariable analysis showed that changes in the dissimilarity of the emerging assemblage were related to each moon phase. The percentage of moon illumination, bottom illumination and tide amplitude explained most of the variation of the emerging assemblage. Species showed differential responses to each moon phase; some were abundant at intermediate phases (e.g., harpacticoids), or peaked at full moon (e.g. ostracods) and others such as mysids emerged in equal abundances at all moon phases. The timing of assemblage emergence followed a consecutive sequence through the night/day period. Most of the studies dealing with the emergence processes have described species-specific responses. Our research shows that the examination at assemblage level may reveal new and distinct patterns of emergence in sublittoral soft-bottom habitats.

  3. Blindness from spitting cobra venom: Case report | Atipo-Tsiba | East ...

    African Journals Online (AJOL)

    Spitting cobra is the name given to some snakes of the family of Elapidae, belonging to the genus Naja or Hemachatus that have the ability to spitt heir venom (up to 3m) to blind their predators. Naja mossambica is the most answered species in Africa.The precise statistics of attacks due to this snake are available, let alone ...

  4. Geotechnical and Geological Aspects of Differential Subsidence in the Skaw Spit, Denmark

    DEFF Research Database (Denmark)

    Andersen, Holger Lykke; Thorsen, Grete; Hauerbach, P.

    1996-01-01

    Local differential subsidence has been observed by means of repeated precise levellings in the township of Skagen at the northernmost tip of the Skaw Spit in Jutland. We have l studied the possible causes of the subsidence. Oedometer tests have been carried out on undisturbed clayey samples from ...

  5. Proteomic characterization of venom of the medically important Southeast Asian Naja sumatrana (Equatorial spitting cobra).

    Science.gov (United States)

    Yap, Michelle Khai Khun; Fung, Shin Yee; Tan, Kae Yi; Tan, Nget Hong

    2014-05-01

    The proteome of Naja sumatrana (Equatorial spitting cobra) venom was investigated by shotgun analysis and a combination of ion-exchange chromatography and reverse phase HPLC. Shotgun analysis revealed the presence of 39 proteins in the venom while the chromatographic approach identified 37 venom proteins. The results indicated that, like other Asiatic cobra venoms, N. sumatrana contains large number of three finger toxins and phospholipases A2, which together constitute 92.1% by weight of venom protein. However, only eight of the toxins can be considered as major venom toxins. These include two phospholipases A2, three neurotoxins (two long neurotoxins and a short neurotoxin) and three cardiotoxins. The eight major toxins have relative abundance of 1.6-27.2% venom proteins and together account for 89.8% (by weight) of total venom protein. Other venom proteins identified include Zn-metalloproteinase-disintegrin, Thaicobrin, CRISP, natriuretic peptide, complement depleting factors, cobra venom factors, venom nerve growth factor and cobra serum albumin. The proteome of N. sumatrana venom is similar to proteome of other Asiatic cobra venoms but differs from that of African spitting cobra venom. Our results confirm that the main toxic action of N. sumatrana venom is neurotoxic but the large amount of cardiotoxins and phospholipases A2 are likely to contribute significantly to the overall pathophysiological action of the venom. The differences in toxin distribution between N. sumatrana venom and African spitting cobra venoms suggest possible differences in the pathophysiological actions of N. sumatrana venom and the African spitting cobra venoms, and explain why antivenom raised against Asiatic cobra venom is not effective against African spitting cobra venoms. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Spitting Image and Pre-Televisual Political Satire: Graphics and Puppets to Screens

    Directory of Open Access Journals (Sweden)

    Kiene Brillenburg

    2011-08-01

    Full Text Available

     

    Abstract: In this article, I read the satire TV show "Spitting Image" as a virtual archive of eighteenth-century and nineteenth-century graphic satire (John Gillray, George Cruikshank and nineteenth-century street puppet-theatre (Punch and Judy. Though innovative as satire TV, "Spitting Image" remediated the style of Georgian visual satire as well as the conventions of nineteenth-cenutry puppet theatre. This reading thus counters non-historical analyses of the show that have approached "Spitting Image" as being disconnected from pre-televisual satires.

    Résumé

     

    : Cet article propose une lecture du feuilleton télévisé satirique "Spitting Image" comme une archive virtuelle de deux sources historiques: les dessins satiriques des 18e et 19e siècles (John Gillray, George Cruikshank et le théâtre de marionnettes de rue du 19e siècle (Punch et Judy. "Spitting Image" passe à juste titre comme une émission très novatrice, mais son format mérite d'être analysé comme la "re-médiation" de formes plus anciennes. La présente lecture se propose donc de donner la réplique aux critiques historiquement non fondées qui insistent sur la solution de continuité entre "Spitting Image" et les formes satiriques antérieures à l'ère télévisée.

  7. Ophthalmia due to spitting cobra venom in an urban setting--a report of three cases.

    Science.gov (United States)

    Ang, Leslie Jonathan; Sanjay, Srinivasan; Sangtam, Tiakumzuk

    2014-01-01

    To describe three presentations of spitting cobra venom induced ophthalmia in urban Singapore. Case notes and photographs of three patients with venom ophthalmia who presented to our clinic between 2007 and 2012 were reviewed. Two patients encountered the spitting cobra while working at a job site while the third patient had caught the snake and caged it. The venom entered the eyes in all 3 cases. Immediate irrigation with tap water was carried out before presenting to the Accident and Emergency department. All patients were treated medically with topical antibiotic prophylaxis and copious lubricants. The use of anti-venom was not required in any case. All eyes recovered with no long-term sequelae. If irrigation is initiated early, eyes can recover with no significant complications or sequelae.

  8. Ophthalmia Due to Spitting Cobra Venom in an Urban Setting - A Report of Three Cases

    Science.gov (United States)

    Ang, Leslie Jonathan; Sanjay, Srinivasan; Sangtam, Tiakumzuk

    2014-01-01

    To describe three presentations of spitting cobra venom induced ophthalmia in urban Singapore. Case notes and photographs of three patients with venom ophthalmia who presented to our clinic between 2007 and 2012 were reviewed. Two patients encountered the spitting cobra while working at a job site while the third patient had caught the snake and caged it. The venom entered the eyes in all 3 cases. Immediate irrigation with tap water was carried out before presenting to the Accident and Emergency department. All patients were treated medically with topical antibiotic prophylaxis and copious lubricants. The use of anti-venom was not required in any case. All eyes recovered with no long-term sequelae. If irrigation is initiated early, eyes can recover with no significant complications or sequelae. PMID:25100912

  9. Pharmacokinetics of Naja sumatrana (Equatorial Spitting Cobra) Venom and Its Major Toxins in Experimentally Envenomed Rabbits

    OpenAIRE

    Michelle Khai Khun Yap; Nget Hong Tan; Si Mui Sim; Shin Yee Fung; Choo Hock Tan

    2014-01-01

    Background The optimization of snakebite management and the use of antivenom depend greatly on the knowledge of the venom's composition as well as its pharmacokinetics. To date, however, pharmacokinetic reports on cobra venoms and their toxins are still relatively limited. In the present study, we investigated the pharmacokinetics of Naja sumatrana (Equatorial spitting cobra) venom and its major toxins (phospholipase A2, neurotoxin and cardiotoxin), following intravenous and intramuscular adm...

  10. Spitting cobras: fluid jets in nature as models for technical applications

    Science.gov (United States)

    Balmert, Alexander; Hess, David; Brücker, Christoph; Bleckmann, Horst; Westhoff, Guido

    2011-04-01

    Spitting cobras defend themselves by ejecting rapid jets of venom through their fangs towards the face of an offender. To generate these jets, the venom delivery system of spitting cobras has some unique adaptations, such as prominent ridges on the surface of the venom channel. We examined the fluid acceleration mechanisms in three spitting cobra species of the genus Naja. To investigate the liquid-flow through the venom channel we built a three-dimensional 60:1 scale model. First we determined the three-dimensional structure of the channel by using microcomputer tomography. With help of the micro computer tomographical data we then created a negative form out of wax. Finally, silicon was casted around the wax form and the wax removed, resulting in a completely transparent model of the cobrás venom channel. The physical-chemical properties of the cobra venom were measured by micro rheometry and tensiometry. Thereafter, an artificial fluid with similar properties was generated. Particle image velocimetry (PIV) was performed to visualize the flow of the artificial liquid in the three-dimensional model. Our experiments show how the surface structure of the venom channel determines the liquid flow through the channel and ultimately the form of the liquid jet. Understanding the biological mechanisms of venom ejection helps to enhance industrial processes such as water jet cutting and cleaning as well as injection methods in technical and medical sectors, e.g. liquid microjet dissection in microsurgery.

  11. Reconstruction of the Dead (Grey Dune evolution along the Curonian Spit, Southeastern Baltic

    Directory of Open Access Journals (Sweden)

    Nikita Dobrotin

    2013-07-01

    Full Text Available One of the unique places in Europe in both environmental and cultural terms is the Curonian Spit – a massive sandy barrier separating the Curonian Lagoon from the Baltic Sea. Straddling both the Lithuanian and the Russian parts, the spit is included into the UNESCO list of cultural heritage monuments. From the geological point of view, it is still an “alive” environment dominated by aeolian deposits. With the help of modern geophysical and geochronological techniques (ground-penetrating radar [GPR] surveys, LIDAR data, and radiocarbon [14-C] dating, detailed investigations of paleosols were carried out in the Dead (Grey Dunes massif located between Juodkrante and Pervalkasettlements on the Lithuanian half of the Curonian Spit. Several soil-forming generations (phases during 5800–4500, 3900–3100, 2600–2400, and from 1900 calendar years BP until the present have been distinguished. GPR surveys enabled a series of paleogeographic reconstructions of the massif for different time intervals of itsevolutionary history.

  12. The Skallingen spit, Denmark: birth of a back-barrier saltmarsh

    Science.gov (United States)

    Bartholdy, Jesper; Brivio, Lara; Bartholdy, Anders; Kim, Daehyun; Fruergaard, Mikkel

    2017-09-01

    The formation and evolution of a modern saltmarsh platform on the barrier spit Skallingen in the northernmost part of the Wadden Sea was investigated through historical map records, 12 orthophotos covering the period from 1945 to 2012, sediment cores and cross-sectional creek profiles. The barrier spit, which constitutes the foundation of the saltmarsh platform, formed in about 50 years in the seventeenth century. After its formation the spit was left as a bare sandflat for about 200 years. Along with the development of foredunes, an increased availability of fine-grained sediment and establishment of vegetation in the beginning of the 1890s, the saltmarsh area formed in about 100 years, while the development of a large system of saltmarsh creeks took place in just ca. 50 years. The development of the drainage network, saltmarsh creek morphology and sedimentology during the saltmarsh formation are described in detail and analysed with special attention to the transformation rate from bare sandflat to a genuine vegetation-covered back-barrier saltmarsh.

  13. Sands styrke

    DEFF Research Database (Denmark)

    Jacobsen, H. Moust; Jørgensen, Mogens B.; Poulsen, H. Serup

    1975-01-01

    På grundlag af triaxialforsøg med D=7 og 20 cm og varierende højde på løse og faste lejringer af Blokhussand kan effekten af varierende højde-breddeforhold og spændingsniveau samt skalaeffekten bestemmes. Ved sammenligning med pladeforsøg med overfladelast op til 8 t/m2 kan den almindelige fremga...... fremgangsmåde ved bæreevneberegninger på sand undersøges....

  14. sand mold

    Science.gov (United States)

    Kovačević, Lazar; Terek, Pal; Miletić, Aleksandar; Kakaš, Damir

    2014-08-01

    Interfacial heat transfer coefficient at the metal-mold interface (IHTC) was estimated by an iterative algorithm based on the function specification method. An Al-9 wt% Si alloy plate casting was made in a sand mold prepared by CO2 process. Thermal history obtained from the experiment was used to solve an inverse heat conduction problem. Acquired transient IHTC values are then given in function of the casting surface temperature at the interface. By comparing the obtained results with previous findings, the influence of grain fineness number and consequently of mold roughness on maximum IHTC values is revealed.

  15. Dispersants as used in response to the MC252-spill lead to higher mobility of polycyclic aromatic hydrocarbons in oil-contaminated Gulf of Mexico sand.

    Directory of Open Access Journals (Sweden)

    Alissa Zuijdgeest

    Full Text Available After the explosion of the Deepwater Horizon oil rig, large volumes of crude oil were washed onto and embedded in the sandy beaches and sublittoral sands of the Northern Gulf of Mexico. Some of this oil was mechanically or chemically dispersed before reaching the shore. With a set of laboratory-column experiments we show that the addition of chemical dispersants (Corexit 9500A increases the mobility of polycyclic aromatic hydrocarbons (PAHs in saturated permeable sediments by up to two orders of magnitude. Distribution and concentrations of PAHs, measured in the solid phase and effluent water of the columns using GC/MS, revealed that the mobility of the PAHs depended on their hydrophobicity and was species specific also in the presence of dispersant. Deepest penetration was observed for acenaphthylene and phenanthrene. Flushing of the columns with seawater after percolation of the oiled water resulted in enhanced movement by remobilization of retained PAHs. An in-situ benthic chamber experiment demonstrated that aromatic hydrocarbons are transported into permeable sublittoral sediment, emphasizing the relevance of our laboratory column experiments in natural settings. We conclude that the addition of dispersants permits crude oil components to penetrate faster and deeper into permeable saturated sands, where anaerobic conditions may slow degradation of these compounds, thus extending the persistence of potentially harmful PAHs in the marine environment. Application of dispersants in nearshore oil spills should take into account enhanced penetration depths into saturated sands as this may entail potential threats to the groundwater.

  16. Decadal changes in North Atlantic atmospheric circulation patterns recorded by sand spits since 1800 CE

    DEFF Research Database (Denmark)

    Poirier, Clément; Tessier, Bernadette; Chaumillon, Éric

    2017-01-01

    . High rates of sediment supply can locally offset the global retrogradation trend, providing valuable records of past environmental change occurring on transgressive coasts. However, geochronological control limits the temporal resolution of such records to millennial or centennial timescales...

  17. Sand Diver

    Science.gov (United States)

    Scott, Alan J.

    2005-01-01

    A few years ago, I was preparing to teach a summer enrichment program for middle school students at the University of Wisconsin-Stout. With swimming on the minds of most kids during the summer, I thought buoyancy would be a fun topic to discuss. An interesting way to introduce this concept is by discussing the beer-drinking balloonist who, in a lawn chair, floated to 11,000 feet above Los Angeles in 1997. However, I needed a hands-on project and was not about to go purchase some lawn chairs to duplicate this experiment. A simple submersible called the "Sand Diver" was designed and is now used as a hands-on activity for my introductory physics course.

  18. Sublittoral Harpacticoida (Crustacea, Copepoda from the Magellan Straits and the Beagle Channel (Chile. Preliminary results of abundance and generic diversity

    Directory of Open Access Journals (Sweden)

    Kai Horst George

    1999-12-01

    Full Text Available Samples of meiofauna were collected with a Multicorer during the Magellan `Victor Hensen´ Campaign of RV `Victor Hensen´ in 1994 at 62 stations along the Magellan Straits and the Beagle Channel. Seventeen samples were analysed in the framework of a larger project. Only 69 species of Harpacticoida are known from Chile so far, all of them inhabiting the littoral zone. The Magellan Campaign of RV `Victor Hensen´ provided the first opportunity to obtain sublittoral samples of meiobenthos of Chilean coasts. In these samples the Copepoda were represented by 4 of its orders: Calanoida, Cyclopoida, Poecilostomatoida and Harpacticoida, the latter exhibiting the highest abundances. Representatives of 19 harpacticoid families (6 of which are new for Chilean waters were identified in the samples. The species found in 15 of these families belong to 28 genera of which 18 are new to the Chilean fauna. With respect to taxa composition and distribution, the following preliminary results can be presented: the number of new families and new genera for the southern tip of South America increased considerably; a relatively high similarity between the Magellan Straits/Beagle Channel and areas of corresponding northern latitudes can be observed; the Magellan Straits and Beagle Channel show considerable differences with respect to taxa composition and diversity of the harpacticoid fauna.

  19. Sublittoral and bathyal Harpacticoida (Crustacea, Copepoda of the Magellan region. Composition, distribution and species diversity of selected major taxa

    Directory of Open Access Journals (Sweden)

    Kai Horst George

    2005-12-01

    Full Text Available Two expeditions, undertaken in 1994 and 1996, provided quantitatively sampled material of sublittoral and bathyal meiobenthos from the Paso Ancho of the Straits of Magellan, the Beagle Channel, and the Patagonian continental slope (Chile. To investigate whether these distinct geographic areas might also be characterised by different harpacticoid assemblages, qualitative and quantitative analyses of Copepoda Harpacticoida were carried out. At supraspecific level 25 harpacticoid families were found, as well as several species that could not yet be assigned to any major harpacticoid taxon. Due to the high amount of collected Harpacticoida, detailed investigations at species level had to be restricted to six taxa, namely the Ancorabolidae, Argestidae, Cletodidae, Diosaccinae, Paramesochridae, and Paranannopinae. The corresponding specimens were assigned to 122 species in 52 genera. More than 80% of them are new to science. Qualitative comparisons of both species composition and species distribution allow the three areas to be distinguished in terms of species richness. However, statistical analyses confirm these results only partly. Similarity analyses applying non-metrical multidimensional scaling, as well as diversity analyses using the rarefaction method, suggest that the observed differences in distribution and diversity patterns are due to small-scale, local conditions, which may overlay possible large-scale ones.

  20. It's in the sand

    OpenAIRE

    Mitchell, Clive

    2016-01-01

    Sand is sand isn’t it? Sand gets everywhere but rather than a nuisance it is a valuable, high-purity raw material. Clive Mitchell, Industrial Minerals Specialist at the British Geological Survey (BGS), talks us through what sand is, what it can be used for and how to find it. His exploration of sand takes us from the deserts of Arabia to the damp sand pits of Mansfield!

  1. Infeksi Cacing pada Ular Kobra (Naja sputatrix di Bali (WORM INFECTION ON SPITTING COBRA SNAKE (Naja Sputatrix IN BALI

    Directory of Open Access Journals (Sweden)

    Dyah Ayu Sismami

    2014-10-01

    Full Text Available It has been done the survey for study about worm infection on spitting cobra snake (Naja sputatrix inBali. There were 15 fecal samples from wild spitting cobra snake in Bali. The examination was usingconcentration cediment method. The result of examination showed that from all 15 fecal samples containedthe worm egg. From the result it could be conclude that the prevalent worm infection on spitting cobrasnake in Bali is capability 100% . From this study it means that infectioned could be happen more than 1(multiple infection on 1 splitting cobra snake. The kind and prevalent of worm infected snake wereRhabdias sp (60,03%, Strongyloides sp (60,03%, Oxyuris sp (53,3%, Kalicephalus spp (20,01%, danCapilaria sp (6,67%. For enrich the information of another kind of parasitic infection should be done theresearch with variable and more collected samples.

  2. Use of digital image analysis combined with fractal theory to determine particle morphology and surface texture of quartz sands

    Directory of Open Access Journals (Sweden)

    Georgia S. Araujo

    2017-12-01

    Full Text Available The particle morphology and surface texture play a major role in influencing mechanical and hydraulic behaviors of sandy soils. This paper presents the use of digital image analysis combined with fractal theory as a tool to quantify the particle morphology and surface texture of two types of quartz sands widely used in the region of Vitória, Espírito Santo, southeast of Brazil. The two investigated sands are sampled from different locations. The purpose of this paper is to present a simple, straightforward, reliable and reproducible methodology that can identify representative sandy soil texture parameters. The test results of the soil samples of the two sands separated by sieving into six size fractions are presented and discussed. The main advantages of the adopted methodology are its simplicity, reliability of the results, and relatively low cost. The results show that sands from the coastal spit (BS have a greater degree of roundness and a smoother surface texture than river sands (RS. The values obtained in the test are statistically analyzed, and again it is confirmed that the BS sand has a slightly greater degree of sphericity than that of the RS sand. Moreover, the RS sand with rough surface texture has larger specific surface area values than the similar BS sand, which agree with the obtained roughness fractal dimensions. The consistent experimental results demonstrate that image analysis combined with fractal theory is an accurate and efficient method to quantify the differences in particle morphology and surface texture of quartz sands.

  3. Industrial sand and gravel

    Science.gov (United States)

    Dolley, T.P.

    2013-01-01

    Domestic production of industrial sand and gravel in 2012 was about 49.5 Mt (55 million st), increasing 13 percent compared with that of 2011. Some important end uses for industrial sand and gravel include abrasives, filtration, foundry, glassmaking, hydraulic fracturing sand (frac sand) and silicon metal applications.

  4. Reproduction among protobranch bivalves of the family Nuculidae from sublittoral, bathyal, and abyssal depths off the New England coast of North America

    Science.gov (United States)

    Scheltema, Rudolf S.; Williams, Isabelle P.

    2009-09-01

    Protobranch bivalve species of the family Nuculidae pass through either a planktonic lecithotrophic larval stage or a direct non-planktonic development. Oogenesis of the three sublittoral species examined is synchronous. Deposition of egg masses by Nucula delphinodonta and spawning by Nucula annulata and Nucula proxima occur only during summer months. Among the four bathyal and abyssal species, Ennucula similis, Ennucula granulosa, Deminucula atacellana, and Brevinucula verrilli, oogenesis is asynchronous and there is no discernable pattern of periodicity of spawning. Absence of periodicity in reproduction in these deep-sea species is confirmed by examination of individuals from dredge samples taken at different times of the year. The median apparent fecundity among both sublittoral and deep-sea species is directly related to size (i.e. shell length) and age. Among the Nuculidae the median apparent fecundity is greater among sublittoral than bathyal and abyssal species. The geographic distribution of a species depends on its capacity to disperse. The dispersal of the planktonic lecithotrophic larvae of the sublittoral species N. annulata and N. proxima is limited to the continental shelf of the northwestern Atlantic by inshore bottom circulation and because these very small planktonic larvae (<2.5 mm) lack the capacity to move vertically upward through the water column into the offshore currents. On the other hand, the bathyal and abyssal species having lecithotrophic larvae have a very wide amphi-Atlantic distribution extending from 60°N to 40°S latitude along the North and South American coasts and from 55°N to ca. 19°S from off Europe southwards to the coast of West Africa as a consequence of dispersal by planktonic lecithotrophic larvae along the seafloor. The amphi-Atlantic dispersal must occur stepwise between deep-sea populations (e.g., off Greenland). Such a geographic distribution indicates a widespread dispersal and is supported by the genetic

  5. Single Picture Integration for Territorial Water Surveillance (SPITS): An initiative to improve situational awareness in littoral waters

    NARCIS (Netherlands)

    Theil, A.; Huizing, A.; Heijningen, A.W.P.

    2006-01-01

    Single Picture Integration for Territorial Water Surveillance (SPITS) is an initiative conducted by TNO Defence, Security and Safety in which techniques to enhance the quality of the maritime surface picture are considered. Observing the environment with a suite of dissimilar sensors is considered

  6. Eastern Scheldt Sand, Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Andersen, A. T; Madsen, E. B.; Schaarup-Jensen, A. L.

    The present data report contains data from 13 drained triaxial tests, performed on two different sand types in the Soil Mechanics Laboratory at Aalborg University in March, 1997. Two tests have been performed on Baskarp Sand No. 15, which has already ken extensively tested in the Soil Mechanics...... Laboratory. The remaining 11 triaxial tests have ben performed on Eastern Scheldt Sand, which is a material not yet investigated at the Soil Mechanics Laboratory. In the first pari of this data report, the characteristics of the two sand types in question will be presented. Next, a description...

  7. Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Borup, Marianne; Hedegaard, Jette

    The Soil Mechanics Laboratory has started performing tests with a new sand, Baskarp No 15. Baskarp No 15 is a graded sand from Sweden. The shapes of the largest grains are round, while the small grains have sharp edges. The main part of of Baskarp No 15 is quarts, but it also contains feldspar...... and biotit. Mainly the sand will be used for tests concerning the development og the theory of building up pore pressure in sand, L. B. Ibsen 1993....

  8. Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Bødker, Lars Bødker

    The Soil Mechanics Laboratory has started performing tests with a new sand, Baskarp No 15. Baskarp No 15 is a graded sand from Sweden. The shapes of the largest grains are round, while the small grains have sharp edges. The main part of of Baskarp No 15 is quarts, but it also contains feldspar...... and biotit. Mainly the sand will be used for tests concerning the development of the theory of building up pore pressure in sand....

  9. Lund Sand No 0

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Jakobsen, Finn Rosendal

    During the last 15 years the Geotechnical Engineering Group (GEG) at Aalborg University has performed triaxial tests with a sand called Lund No 0. Lund No 0 is a graded sand from a gravel pit near Horsens in Denmark. For the classification of the sand the following tests have been performed: Sieve...

  10. Remote-sensing perspective and GPR subsurface perception on the growth of a recently emerged spit at Talashil coast, west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Loveson, V.J.; Khare, R.; Sundararajan, M.; Gujar, A.R.

    The growth as well as the internal structure of the recently emerged Talashil spit along the west coast of India was studied using multidate satellite images coupled with ground-penetrating radar (GPR) information. Decadal changes (2003...

  11. Mapping of Eelgrass (Zostera marina) at Sidney Spit, Gulf Islands National Park Reserve of Canada, Using High Spatial Resolution Remote Imagery

    Science.gov (United States)

    O'Neill, Jennifer D.

    The main goal of this thesis was to evaluate the use of high spatial remote imagery to map the location and biophysical parameters of eelgrass in marine areas around Sidney Spit, a part of the Gulf Islands National Park Reserve of Canada (GINPRC). To meet this goal, three objectives were addressed: (1) Define key spectral variables that provide optimum separation between eelgrass and its associated benthic substrates, using in situ hyperspectral measurements, and simulated IKONOS and Landsat 7ETM+ spectral response; (2) evaluate the efficacy of these key variables in classification of the high spatial resolution imagery, AISA and IKONOS, at various levels of processing, to determine the processing methodology that offers the highest eelgrass mapping accuracy; and (3) evaluate the potential of "value-added" classification of two eelgrass biophysical indicators, LAI and epiphyte type. In situ hyperspectral measurements acquired at Sidney Spit in August 2008 provided four different data sets: above water spectra, below water spectral profiles, water-corrected spectra, and pure endmember spectra. In Chapter 3, these data sets were examined with first derivative analysis to determine the unique spectral variables of eelgrass and associated benthic substrates. The most effective variables in discriminating eelgrass from all other substrates were selected using data reduction statistics: M-statistic analysis and multiple discriminant analyses (MDA). These selected spectral variables enabled eelgrass classification accuracy of 98% when separating six classes on above water data: shallow ( 3 m) eelgrass, shallow sand, deep sand, shallow green algae, and spectrally deep water. The variables were located mainly in the green wavelengths, where light penetrates to the greatest depth: the slope from 500 -- 530 nm, and the first derivatives at 566 nm, 580 nm, and 602 nm. The same data were classified with 96% accuracy after correcting for the water column, using the ratios 566

  12. Removing shore protection structures to facilitate migration of landforms and habitats on the bayside of a barrier spit

    Science.gov (United States)

    Nordstrom, Karl F.; Jackson, Nancy L.

    2013-10-01

    Coastal landforms and habitats require space to reform in response to storm damage to increase the likelihood of long-term sustainability. The purpose of this study is to evaluate the potential for removing shore protection structures to allow natural shoreline processes to prevail as part of a strategy to adapt to sea level rise associated with climate change. The location of the study was Sandy Hook Spit, New Jersey, a site managed by the U.S. National Park Service (NPS). A field investigation was conducted to identify the structures that impede migration of landforms and habitats, the function of each structure in protecting resources, and the opportunities to facilitate landform migration by removing the structures or allowing them to deteriorate. Nineteen shore-parallel walls are present along the ocean and bay shore of a 10 km long portion of the spit. Most of the shore protection structures were built when the spit was formerly used by the US Army, and many bulkheads on the bay shore have deteriorated. Sediment will become available to the longshore transport system where protection structures are removed, contributing to spit growth at the ends of drift cells, possibly mimicking the spits that were more conspicuous on the bay shore prior to human alterations. Observations indicate that new habitat can be created by loss and re-creation in a different location by longshore extension, not just by landward migration. Allowing shore protection structures to deteriorate will leave human infrastructure in the landscape. Removing these structures is more costly but can result in a more rapid reversion to a natural system. The time horizon is critical in determining the social, political and economic feasibility of removing structures and the expectations for geomorphic and habitat change. The feasibility of protecting threatened buildings and roads will decrease in the future as sea level rises and the existing protection structures degrade or fall below new

  13. Re-examination of chewing and spitting behavior: characteristics within and across eating disorder diagnoses.

    Science.gov (United States)

    Durkin, Nora E; Swanson, Sonja A; Crow, Scott J; Mitchell, James; Peterson, Carol B; Crosby, Ross

    2014-01-01

    Chewing and spitting (CS) out food is a relatively understudied eating disorder behavior. The aim of this study was to examine lifetime and current frequencies of CS across eating disorder diagnostic groups and to compare the severity of eating disorder symptomatology between participants who did and did not endorse CS. A total of 972 individuals presenting for outpatient eating disorder treatment between 1985 and 1996 completed a questionnaire that included items regarding current and lifetime eating disorder behaviors, including CS. Results indicated that both lifetime and current prevalence estimates of CS varied cross-diagnostically, with CS being more common among those with anorexia nervosa and bulimia nervosa compared to those with eating disorder not otherwise specified. CS was significantly associated with several eating disorder symptoms, including compensatory behaviors, meal restriction, and lower BMI. Those who reported CS were also younger in age compared to those who did not report CS. These findings indicate that CS is associated with more severe eating and weight pathology and is not equally prevalent across eating disorder diagnoses. These results also support the relatively high occurrence of CS and the importance of targeting this behavior in eating disorder treatment. Future research should clarify the correlates, mechanisms, and function of CS in eating disorders.

  14. Influence green sand system by core sand additions

    Directory of Open Access Journals (Sweden)

    N. Špirutová

    2012-01-01

    Full Text Available Today, about two thirds of iron alloys casting (especially for graphitizing alloys of iron are produced into green sand systems with usually organically bonded cores. Separation of core sands from the green sand mixture is very difficult, after pouring. The core sand concentration increase due to circulation of green sand mixture in a closed circulation system. Furthermore in some foundries, core sands have been adding to green sand systems as a replacement for new sands. The goal of this contribution is: “How the green sand systems are influenced by core sands?”This effect is considered by determination of selected technological properties and degree of green sand system re-bonding. From the studies, which have been published yet, there is not consistent opinion on influence of core sand dilution on green sand system properties. In order to simulation of the effect of core sands on the technological properties of green sands, there were applied the most common used technologies of cores production, which are based on bonding with phenolic resin. Core sand concentration added to green sand system, was up to 50 %. Influence of core sand dilution on basic properties of green sand systems was determined by evaluation of basic industrial properties: moisture, green compression strength and splitting strength, wet tensile strength, mixture stability against staling and physical-chemistry properties (pH, conductivity, and loss of ignition. Ratio of active betonite by Methylene blue test was also determined.

  15. Modelling sand wave variation

    NARCIS (Netherlands)

    Sterlini-Van der Meer, Fenneke

    2009-01-01

    The sea floor of shallow seas is rarely flat and often dynamic. A widely occurring bedform type is the sand wave. Sand waves form more or less regular wavelike patterns on the seabed with crests up to one third of the water depth, wave lengths of hundreds of metres and a migration rate of metres up

  16. Sands cykliske styrke

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo

    1992-01-01

    Sands cykliske styrke kan beskrives ved Cyclic Liquefaction, Mobilisering, Stabilization og Instant Stabilization. I artiklen beskrives hvorfor Stabilization og Instant Stabilization ikke observeres, når sands udrænede styrke undersøges i triaxial celler, der anvender prøver med dobbelt prøvehøjde....

  17. Pharmacokinetics of Naja sumatrana (Equatorial Spitting Cobra) Venom and Its Major Toxins in Experimentally Envenomed Rabbits

    Science.gov (United States)

    Yap, Michelle Khai Khun; Tan, Nget Hong; Sim, Si Mui; Fung, Shin Yee; Tan, Choo Hock

    2014-01-01

    Background The optimization of snakebite management and the use of antivenom depend greatly on the knowledge of the venom's composition as well as its pharmacokinetics. To date, however, pharmacokinetic reports on cobra venoms and their toxins are still relatively limited. In the present study, we investigated the pharmacokinetics of Naja sumatrana (Equatorial spitting cobra) venom and its major toxins (phospholipase A2, neurotoxin and cardiotoxin), following intravenous and intramuscular administration into rabbits. Principal findings The serum antigen concentration-time profile of the N. sumatrana venom and its major toxins injected intravenously fitted a two-compartment model of pharmacokinetics. The systemic clearance (91.3 ml/h), terminal phase half-life (13.6 h) and systemic bioavailability (41.9%) of N. sumatrana venom injected intramuscularly were similar to those of N. sputatrix venom determined in an earlier study. The venom neurotoxin and cardiotoxin reached their peak concentrations within 30 min following intramuscular injection, relatively faster than the phospholipase A2 and whole venom (Tmax = 2 h and 1 h, respectively). Rapid absorption of the neurotoxin and cardiotoxin from the injection site into systemic circulation indicates fast onsets of action of these principal toxins that are responsible for the early systemic manifestation of envenoming. The more prominent role of the neurotoxin in N. sumatrana systemic envenoming is further supported by its significantly higher intramuscular bioavailability (Fi.m. = 81.5%) compared to that of the phospholipase A2 (Fi.m. = 68.6%) or cardiotoxin (Fi.m. = 45.6%). The incomplete absorption of the phospholipase A2 and cardiotoxin may infer the toxins' affinities for tissues at the injection site and their pathological roles in local tissue damages through synergistic interactions. Conclusion/Significance Our results suggest that the venom neurotoxin is absorbed very rapidly and has the highest

  18. Pharmacokinetics of Naja sumatrana (equatorial spitting cobra) venom and its major toxins in experimentally envenomed rabbits.

    Science.gov (United States)

    Yap, Michelle Khai Khun; Tan, Nget Hong; Sim, Si Mui; Fung, Shin Yee; Tan, Choo Hock

    2014-06-01

    The optimization of snakebite management and the use of antivenom depend greatly on the knowledge of the venom's composition as well as its pharmacokinetics. To date, however, pharmacokinetic reports on cobra venoms and their toxins are still relatively limited. In the present study, we investigated the pharmacokinetics of Naja sumatrana (Equatorial spitting cobra) venom and its major toxins (phospholipase A2, neurotoxin and cardiotoxin), following intravenous and intramuscular administration into rabbits. The serum antigen concentration-time profile of the N. sumatrana venom and its major toxins injected intravenously fitted a two-compartment model of pharmacokinetics. The systemic clearance (91.3 ml/h), terminal phase half-life (13.6 h) and systemic bioavailability (41.9%) of N. sumatrana venom injected intramuscularly were similar to those of N. sputatrix venom determined in an earlier study. The venom neurotoxin and cardiotoxin reached their peak concentrations within 30 min following intramuscular injection, relatively faster than the phospholipase A2 and whole venom (Tmax=2 h and 1 h, respectively). Rapid absorption of the neurotoxin and cardiotoxin from the injection site into systemic circulation indicates fast onsets of action of these principal toxins that are responsible for the early systemic manifestation of envenoming. The more prominent role of the neurotoxin in N. sumatrana systemic envenoming is further supported by its significantly higher intramuscular bioavailability (Fi.m.=81.5%) compared to that of the phospholipase A2 (Fi.m.=68.6%) or cardiotoxin (Fi.m.=45.6%). The incomplete absorption of the phospholipase A2 and cardiotoxin may infer the toxins' affinities for tissues at the injection site and their pathological roles in local tissue damages through synergistic interactions. Our results suggest that the venom neurotoxin is absorbed very rapidly and has the highest bioavailability following intramuscular injection, supporting its role as the

  19. Pharmacokinetics of Naja sumatrana (equatorial spitting cobra venom and its major toxins in experimentally envenomed rabbits.

    Directory of Open Access Journals (Sweden)

    Michelle Khai Khun Yap

    2014-06-01

    Full Text Available BACKGROUND: The optimization of snakebite management and the use of antivenom depend greatly on the knowledge of the venom's composition as well as its pharmacokinetics. To date, however, pharmacokinetic reports on cobra venoms and their toxins are still relatively limited. In the present study, we investigated the pharmacokinetics of Naja sumatrana (Equatorial spitting cobra venom and its major toxins (phospholipase A2, neurotoxin and cardiotoxin, following intravenous and intramuscular administration into rabbits. PRINCIPAL FINDINGS: The serum antigen concentration-time profile of the N. sumatrana venom and its major toxins injected intravenously fitted a two-compartment model of pharmacokinetics. The systemic clearance (91.3 ml/h, terminal phase half-life (13.6 h and systemic bioavailability (41.9% of N. sumatrana venom injected intramuscularly were similar to those of N. sputatrix venom determined in an earlier study. The venom neurotoxin and cardiotoxin reached their peak concentrations within 30 min following intramuscular injection, relatively faster than the phospholipase A2 and whole venom (Tmax=2 h and 1 h, respectively. Rapid absorption of the neurotoxin and cardiotoxin from the injection site into systemic circulation indicates fast onsets of action of these principal toxins that are responsible for the early systemic manifestation of envenoming. The more prominent role of the neurotoxin in N. sumatrana systemic envenoming is further supported by its significantly higher intramuscular bioavailability (Fi.m.=81.5% compared to that of the phospholipase A2 (Fi.m.=68.6% or cardiotoxin (Fi.m.=45.6%. The incomplete absorption of the phospholipase A2 and cardiotoxin may infer the toxins' affinities for tissues at the injection site and their pathological roles in local tissue damages through synergistic interactions. CONCLUSION/SIGNIFICANCE: Our results suggest that the venom neurotoxin is absorbed very rapidly and has the highest

  20. Spit tobacco prevention and cessation counseling: statewide survey of health-care professionals and educators.

    Science.gov (United States)

    Prokhorov, Alexander V; Wetter, David W; Padgett, Diana; de, Moor Carl; Le, Tao; Kitzman, Heather

    2002-01-01

    The use of spit tobacco (ST) products is a serious public health problem in the United States. Use of ST is associated with increased risk of oral cancer, gastrointestinal neoplasms, and other deleterious effects. The prevalence of ST use among adolescents is high in many areas, especially in predominantly rural states (e.g., South Dakota, Montana). Community-wide efforts aimed at prevention and cessation of ST use among young people are needed. A total of 4089 clinicians and educators were surveyed in 1998 regarding their personal ST use and several other characteristics associated with ST prevention and cessation counseling. Educators reported significantly higher rates of ST use than did clinicians. The most prevalent barriers to ST counseling among clinicians were perceptions of patient resistance to referral to ST cessation programs and the lack of community services that effectively treat ST use. Lack of training was a major barrier to ST counseling among all educator subgroups. Although knowledge of the health effects of ST was fairly high among all subgroups, more than 10% of dentists and dental hygienists failed to report that ST use causes gum disease. Most clinicians believed that they should demonstrate leadership in efforts aimed at ST control; however, only 64% of dentists believed that repeated counseling attempts were necessary with patients who continued to use ST. Compared with clinicians, educators generally felt less obligated to provide ST counseling. Eighty percent of physicians reported counseling activities, but fewer than half of the dental professionals did. More than 75% of Drug Abuse Resistance Education (DARE) officers reported having delivered ST counseling, whereas only 4% of volunteer leaders did. Fewer than 50% of educators believed that the ST program they taught was effective. Training of various professionals in ST interventions may benefit from emphasizing different issues (reduction of personal ST use, knowledge, commitment

  1. Venomics of Naja sputatrix, the Javan spitting cobra: A short neurotoxin-driven venom needing improved antivenom neutralization.

    Science.gov (United States)

    Tan, Nget Hong; Wong, Kin Ying; Tan, Choo Hock

    2017-03-22

    The venom proteome of Naja sputatrix (Javan spitting cobra) was elucidated through reverse-phase HPLC, nano-ESI-LCMS/MS and data mining. A total of 97 distinct protein forms belonging to 14 families were identified. The most abundant proteins are the three-finger toxins (3FTXs, 64.22%) and phospholipase A2 (PLA2, 31.24%), followed by nerve growth factors (1.82%), snake venom metalloproteinase (1.33%) and several proteins of lower abundance (cobra, Naja sputatrix is by itself a unique species and should not be confused as the equatorial and the Indochinese spitting cobras. The distinction among the spitting cobras was however unclear prior to the revision of cobra systematics in the mid-90's, and results of some earlier studies are now questionable as to which species was implicated back then. The current study successfully profiled the venom proteome of authenticated N. sputatrix, and showed that the venom is made up of approximately 64% three-finger toxins (including neurotoxins and cytotoxins) and 31% phospholipases A2 by total venom proteins. The findings verified that the paralyzing components in the venom i.e. neurotoxins are predominantly the short-chain subtype (SNTX) far exceeding the long-chain subtype (LNTX) which is more abundant in the venoms of monocled cobra and Indian common cobra. The neurotoxicity of N. sputatrix venom is hence almost exclusively SNTX-driven, and effective neutralization of the SNTX is the key to early reversal of paralysis. Unfortunately, as shown through a toxin-specific assay, the immunological neutralization of the SNTX using the Indonesian antivenom (SABU) was extremely weak, implying that SABU has limited therapeutic efficacy in treating N. sputatrix envenomation clinically. From the practical standpoint, actions need to be taken at all levels from laboratory to production and policy making to ensure that the shortcoming is overcome. Copyright © 2017. Published by Elsevier B.V.

  2. Observations on procedures for thawing and spit-roasting frozen dressed chickens, and post-cooking care and storage: with particular reference to food-poisoning bacteria.

    Science.gov (United States)

    Roberts, D

    1972-09-01

    A comparison was made of four methods of thawing frozen chickens and an average thaw time for each method was determined.Fully and partially thawed chickens, inoculated with salmonellas, Clostridium welchii and Staphylococcus aureus were cooked in a spit-roasting oven at different temperatures for different lengths of time. The chickens were examined freshly cooked and after storage under various conditions.Spit roasting fully thawed chickens until the outer skin was golden brown was sufficient heat-treatment to kill salmonellas and Staph. aureus but Cl. welchii could survive. Salmonellas could also survive if the chickens were not fully thawed before cooking.Incorrect storage after cooking was shown to encourage the growth of pathogens.The incidence of intestinal pathogens in frozen dressed chickens and environmental hazards in spit-roasting establishments were also studied. Of raw chickens examined 35% contained salmonellas (9 serotypes), 63% contained Cl. welchii and 63% Staph. aureus.

  3. How the Cobra Got Its Flesh-Eating Venom: Cytotoxicity as a Defensive Innovation and Its Co-Evolution with Hooding, Aposematic Marking, and Spitting.

    Science.gov (United States)

    Panagides, Nadya; Jackson, Timothy N W; Ikonomopoulou, Maria P; Arbuckle, Kevin; Pretzler, Rudolf; Yang, Daryl C; Ali, Syed A; Koludarov, Ivan; Dobson, James; Sanker, Brittany; Asselin, Angelique; Santana, Renan C; Hendrikx, Iwan; van der Ploeg, Harold; Tai-A-Pin, Jeremie; van den Bergh, Romilly; Kerkkamp, Harald M I; Vonk, Freek J; Naude, Arno; Strydom, Morné A; Jacobsz, Louis; Dunstan, Nathan; Jaeger, Marc; Hodgson, Wayne C; Miles, John; Fry, Bryan G

    2017-03-13

    The cytotoxicity of the venom of 25 species of Old World elapid snake was tested and compared with the morphological and behavioural adaptations of hooding and spitting. We determined that, contrary to previous assumptions, the venoms of spitting species are not consistently more cytotoxic than those of closely related non-spitting species. While this correlation between spitting and non-spitting was found among African cobras, it was not present among Asian cobras. On the other hand, a consistent positive correlation was observed between cytotoxicity and utilisation of the defensive hooding display that cobras are famous for. Hooding and spitting are widely regarded as defensive adaptations, but it has hitherto been uncertain whether cytotoxicity serves a defensive purpose or is somehow useful in prey subjugation. The results of this study suggest that cytotoxicity evolved primarily as a defensive innovation and that it has co-evolved twice alongside hooding behavior: once in the Hemachatus + Naja and again independently in the king cobras ( Ophiophagus ). There was a significant increase of cytotoxicity in the Asian Naja linked to the evolution of bold aposematic hood markings, reinforcing the link between hooding and the evolution of defensive cytotoxic venoms. In parallel, lineages with increased cytotoxicity but lacking bold hood patterns evolved aposematic markers in the form of high contrast body banding. The results also indicate that, secondary to the evolution of venom rich in cytotoxins, spitting has evolved three times independently: once within the African Naja , once within the Asian Naja , and once in the Hemachatus genus. The evolution of cytotoxic venom thus appears to facilitate the evolution of defensive spitting behaviour. In contrast, a secondary loss of cytotoxicity and reduction of the hood occurred in the water cobra Naja annulata , which possesses streamlined neurotoxic venom similar to that of other aquatic elapid snakes (e.g., hydrophiine

  4. How the Cobra Got Its Flesh-Eating Venom: Cytotoxicity as a Defensive Innovation and Its Co-Evolution with Hooding, Aposematic Marking, and Spitting

    Science.gov (United States)

    Panagides, Nadya; Jackson, Timothy N.W.; Ikonomopoulou, Maria P.; Arbuckle, Kevin; Pretzler, Rudolf; Yang, Daryl C.; Ali, Syed A.; Koludarov, Ivan; Dobson, James; Sanker, Brittany; Asselin, Angelique; Santana, Renan C.; Hendrikx, Iwan; van der Ploeg, Harold; Tai-A-Pin, Jeremie; van den Bergh, Romilly; Kerkkamp, Harald M.I.; Vonk, Freek J.; Naude, Arno; Strydom, Morné A.; Jacobsz, Louis; Dunstan, Nathan; Jaeger, Marc; Hodgson, Wayne C.; Miles, John; Fry, Bryan G.

    2017-01-01

    The cytotoxicity of the venom of 25 species of Old World elapid snake was tested and compared with the morphological and behavioural adaptations of hooding and spitting. We determined that, contrary to previous assumptions, the venoms of spitting species are not consistently more cytotoxic than those of closely related non-spitting species. While this correlation between spitting and non-spitting was found among African cobras, it was not present among Asian cobras. On the other hand, a consistent positive correlation was observed between cytotoxicity and utilisation of the defensive hooding display that cobras are famous for. Hooding and spitting are widely regarded as defensive adaptations, but it has hitherto been uncertain whether cytotoxicity serves a defensive purpose or is somehow useful in prey subjugation. The results of this study suggest that cytotoxicity evolved primarily as a defensive innovation and that it has co-evolved twice alongside hooding behavior: once in the Hemachatus + Naja and again independently in the king cobras (Ophiophagus). There was a significant increase of cytotoxicity in the Asian Naja linked to the evolution of bold aposematic hood markings, reinforcing the link between hooding and the evolution of defensive cytotoxic venoms. In parallel, lineages with increased cytotoxicity but lacking bold hood patterns evolved aposematic markers in the form of high contrast body banding. The results also indicate that, secondary to the evolution of venom rich in cytotoxins, spitting has evolved three times independently: once within the African Naja, once within the Asian Naja, and once in the Hemachatus genus. The evolution of cytotoxic venom thus appears to facilitate the evolution of defensive spitting behaviour. In contrast, a secondary loss of cytotoxicity and reduction of the hood occurred in the water cobra Naja annulata, which possesses streamlined neurotoxic venom similar to that of other aquatic elapid snakes (e.g., hydrophiine sea

  5. How the Cobra Got Its Flesh-Eating Venom: Cytotoxicity as a Defensive Innovation and Its Co-Evolution with Hooding, Aposematic Marking, and Spitting

    Directory of Open Access Journals (Sweden)

    Nadya Panagides

    2017-03-01

    Full Text Available The cytotoxicity of the venom of 25 species of Old World elapid snake was tested and compared with the morphological and behavioural adaptations of hooding and spitting. We determined that, contrary to previous assumptions, the venoms of spitting species are not consistently more cytotoxic than those of closely related non-spitting species. While this correlation between spitting and non-spitting was found among African cobras, it was not present among Asian cobras. On the other hand, a consistent positive correlation was observed between cytotoxicity and utilisation of the defensive hooding display that cobras are famous for. Hooding and spitting are widely regarded as defensive adaptations, but it has hitherto been uncertain whether cytotoxicity serves a defensive purpose or is somehow useful in prey subjugation. The results of this study suggest that cytotoxicity evolved primarily as a defensive innovation and that it has co-evolved twice alongside hooding behavior: once in the Hemachatus + Naja and again independently in the king cobras (Ophiophagus. There was a significant increase of cytotoxicity in the Asian Naja linked to the evolution of bold aposematic hood markings, reinforcing the link between hooding and the evolution of defensive cytotoxic venoms. In parallel, lineages with increased cytotoxicity but lacking bold hood patterns evolved aposematic markers in the form of high contrast body banding. The results also indicate that, secondary to the evolution of venom rich in cytotoxins, spitting has evolved three times independently: once within the African Naja, once within the Asian Naja, and once in the Hemachatus genus. The evolution of cytotoxic venom thus appears to facilitate the evolution of defensive spitting behaviour. In contrast, a secondary loss of cytotoxicity and reduction of the hood occurred in the water cobra Naja annulata, which possesses streamlined neurotoxic venom similar to that of other aquatic elapid snakes (e

  6. Sand and Gravel Deposits

    Data.gov (United States)

    Vermont Center for Geographic Information — This dataset is a statewide polygon coverage of sand, gravel, and stone resources. This database includes the best data available from the VT Agency of Natural...

  7. Vestled - Hvide Sande

    DEFF Research Database (Denmark)

    Juel-Christiansen, Carsten; Hesselbjerg, Marianne; Schønherr, Torben

    2009-01-01

    Værket Vestled i Hvide Sande præsenteret i sammenhæng af 1000 nutidige landskabsarkitektoniske arbejder fra hele verden, hvor hvert værk vises på én side......Værket Vestled i Hvide Sande præsenteret i sammenhæng af 1000 nutidige landskabsarkitektoniske arbejder fra hele verden, hvor hvert værk vises på én side...

  8. MECHANICAL REGENERATION OF SAND WASTE

    Directory of Open Access Journals (Sweden)

    D. I. Gnir

    2005-01-01

    Full Text Available The experimental activation of the sand regenerator of the firm SINTO is carried out at ОАО “MZOO". It is shown that sand grains are cleared from films of binding agents, that allows to use the treated sand for preparation of agglutinant and core sands.

  9. Sand (CSW4)

    CSIR Research Space (South Africa)

    Estuarine and Coastal Research Unit

    1982-12-01

    Full Text Available This report is one of a series on Cape Estuaries being published under the general title "The Estuaries of the Cape, Part 2". The report provides information on sand estuary: historical background, abiotic and biotic characteristics. It is pointed...

  10. Virksomhedens sande ansigt

    DEFF Research Database (Denmark)

    Lundholt, Marianne Wolff

    2017-01-01

    Er modhistorier en byrde eller en styrke i forandringsprocesser? Hvad stiller vi op, når adgangen til organisationens sande identitet går gennem medarbejdernes modhistorier? Når vi sammenholder denne erkendelse med vores viden om, at medarbejdere helt naturligt afholder sig fra at videregive disse...

  11. Speleothems and Sand Castles

    Science.gov (United States)

    Hance, Trevor; Befus, Kevin

    2015-01-01

    The idea of building sand castles evokes images of lazy summer days at the beach, listening to waves crash, enjoying salty breezes, and just unplugging for a while to let our inner child explore the wonderful natural toys beneath our feet. The idea of exploring caves might evoke feelings and images of claustrophobia or pioneers and Native…

  12. Sand Filter Technology

    Science.gov (United States)

    2016-08-01

    EXWC) performed the evaluation at the Naval Air Station Lemoore, CA . The two year evaluation period began with one year of sand filter operation...appear dirty? If you answered “ yes ” to the first question and “ yes ” to either of the other questions, investigate this technology for your

  13. Building with Sand

    Science.gov (United States)

    Ashbrook, Peggy

    2010-01-01

    Children playing in damp sand invariably try to make a tower or a tunnel. By providing experiences with a variety of materials, alone and together, teachers set up the conditions for children to learn through their senses and ensure that a class approaches a topic with a common set of experiences to build on. Learning about the properties of…

  14. Analysis Of Conservation Experience Of Heritage Objects In Lithuania (The Curonian Spit And Norway (The Vega Archipelago

    Directory of Open Access Journals (Sweden)

    Nijolė Piekienė

    2014-05-01

    Full Text Available The Curonian Spit (Lithuania and Vega Archipelago (Norway are objects on the UNESCO World Heritage List because of their special kind of landscapes that have been formed not without human intervention. Landscapes created by nature itself or with human help are exceptional works which, as determined by the legal acts in regulation of these processes, have to be referred to as objects of cultural heritage. The cultural heritage must be protected, exhibited and viewed as objects of science and cognition. Lithuania and Norway have different conditions formed for identification, conservation and protection of these works, but both countries have recognized that protection of cultural heritage, passing it on for future generations is the duty of the state. Prospects of heritage management and development, and exchange of experience should be the top priorities for action in Lithuania.

  15. Effect of different fertilization and irrigation methods on nitrogen uptake, intercepted radiation and yield of okra (Abelmoschus esculentum L) grown in the Keta Sand Spit of Southeast Ghana

    DEFF Research Database (Denmark)

    Danso, E O; Abenney-Mickson, S; Sabi, E B

    2015-01-01

    , the yield of drip fertigated okra was as high as or better than sprinkler irrigated okra with manure spread on the soil, sprinkler and drip with localized manure. In the second experiment, though nitrogen applied was the same (89 kg N ha−1), for all treatments, the highest N uptake, intercepted radiation...... compared to sprinkler irrigation. Therefore, drip irrigation with frequent fertigation allow reduced P-load and more efficient use of nitrogen, water and radiation than with sprinkler irrigation....... spread, (ii) irrigation by sprinkler, fertilized with localized manure, (iii) irrigation by drip, fertilized with localized manure, (iv) irrigation by drip, fertigated with N–K chemical fertilizers (twice during the crop season in the first experiment, weekly in the second and third experiment). Nitrogen...

  16. Triaxial tests in Fontainebleau sand

    DEFF Research Database (Denmark)

    Latini, Chiara; Zania, Varvara

    2016-01-01

    The purpose of this internal report is to examine the influence of relative density on the strength and deformation characteristics of Fontainebleau sand. Compression triaxial tests were performed on saturated sand samples with different densities and initial confining pressure. Note...

  17. Long-term dynamics (1990 to 2004 of the polychaete fauna from the sublittoral soft-bottoms off Punta Coloso (Antofagasta, northern Chile

    Directory of Open Access Journals (Sweden)

    Franklin D. Carrasco

    2006-12-01

    Full Text Available Long-term monitoring (1990 to 2004 at four stations (50 to 60 m depth off Punta Coloso, Antofagasta, northern Chile, has allowed us to study temporal changes in the sublittoral macrobenthic polychaete infauna composition and abundance. The numerical contribution of the polychaete fraction to the total fauna was high (65 to 93%, whereas biomass was smaller and variable (20 to 85%. The number of invertebrate species collected per cruise was relatively low (40 to 90 species and the number of polychaete species ranged from 18 to 37 per cruise (mean = 29.9, with a cumulative number of 56 polychaete species. The most abundant species collected included the small-sized Aricidea pigmentata Carrasco (26.5%, Magelona phyllisae Jones (22.7%, Paraprionospio pinnata (Ehlers (13.5%, Tharyx longisetosa Hartmann-Schröder (12.1%, and Prionospio peruana Hartmann-Schröder (11.8%. Clear general patterns or tendencies are not seen in temporal variations of polychaete fauna nor when analyzing the seasons individually. P. pinnata was the only dominant species to show a general tendency in abundance fluctuations. Although the study period included two El Niño events (1991-1992 and 1997-1998, a clear dynamic was not seen in either abundance or dominant species. The analyzed data validate or corroborate high stability or persistence over time that has been suggested for polychaete fauna in the study area. Such stability or persistence exists in spite of high seasonal variability and interannual fluctuations in the region’s oceanographic conditions.

  18. An investigation of recent storm histories using Ground Penetrating Radar at Bay-Bay Spit, Bicol, Central Philippines

    Science.gov (United States)

    Switzer, Adam D.; Pile, Jeremy; Soria, Janneli Lea A.; Siringan, Fernando; Daag, Arturo; Brill, Dominik

    2016-04-01

    The Philippine archipelago lies in the path of seasonal tropical cyclones, and much of the coast is prone to periodic inundation and overwash during storm surges. On example is typhoon Durian a category 3 storm that made landfall on the 30th November 2006, in Bicol province, on the east central Philippine coast. Satellite imagery from May 2007 reveal that Durian breached a sandy spit that runs southeast from the mouth of the Quinale River at Bay-Bay village towards Tabaco City. The imagery also showed that, although the breach site showed signs of partial recovery, geomorphological evidence of the inundation event associated with typhoon Durian still remains. In 2012 we mapped the geomorphological features of Durian. In June 2013 we returned to conduct Ground Penetrating Radar (GPR) surveys on the Bay-Bay spit to investigate potential subsurface evidence of previous storm events. The GPR surveys comprised five, 1.5 km, longshore profiles and 12 cross-shore profiles, of 50 m - 200 m in length. The GPR system used for this study was a Sensors and Software Noggin with 100 Mhz antennas. Near surface velocities were determine using Hyperbolae matching in order to estimate depth. Topographic and positional data were collected using a dGPS system. After minimal processing depth of penetration during the survey varied from 2 - 8 m. The cross-shore GPR profiles reveal at least two erosional events prior to 2006 typhoon Durian, with approximately 10 m of recovery and progradation between each erosion surface. The GPR profiles that captured the erosional features were revisited in September 2013 for trial pitting, stratigraphic description, and sediment sampling. Sediment cores were taken horizontally from the trench walls and vertically from the trench bases to date sediments using Optically Stimulated Luminescence (OSL), which eventually could constrain the timing of the erosional surfaces.

  19. Northern Sand Sea

    Science.gov (United States)

    2005-01-01

    [figure removed for brevity, see original site] Our topic for the weeks of April 4 and April 11 is dunes on Mars. We will look at the north polar sand sea and at isolated dune fields at lower latitudes. Sand seas on Earth are often called 'ergs,' an Arabic name for dune field. A sand sea differs from a dune field in two ways: 1) a sand sea has a large regional extent, and 2) the individual dunes are large in size and complex in form. This VIS image was taken at 82 degrees North latitude during Northern spring. The image is completely dominated by dunes. In sand seas, it is very common for a single type of dune to occur, and for a single predominate wind to control the alignment of the dunes. Image information: VIS instrument. Latitude 82.2, Longitude 152.5 East (207.5 West). 19 meter/pixel resolution. Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  20. On Pluvial Compaction of Sand

    DEFF Research Database (Denmark)

    Jacobsen, Moust

    At the Institute of Civil Engineering in Aalborg model tests on dry sand specimens have been carried out during the last five years. To reduce deviations in test results, the sand laying technique has been carefully studied, and the sand mass spreader constructed. Preliminary results have been...

  1. Environmental Impacts of Sand Exploitation. Analysis of Sand Market

    Directory of Open Access Journals (Sweden)

    Marius Dan Gavriletea

    2017-06-01

    Full Text Available Sand is an indispensable natural resource for any society. Despite society’s increasing dependence on sand, there are major challenges that this industry needs to deal with: limited sand resources, illegal mining, and environmental impact of sand mining. The purpose of this paper is twofold: to present an overview of the sand market, highlighting the main trends and actors for production, export and import, and to review the main environmental impacts associated with sand exploitation process. Based on these findings, we recommend different measures to be followed to reduce negative impacts. Sand mining should be done in a way that limits environmental damage during exploitation and restores the land after mining operations are completed.

  2. Case Study on the Implementation of a Video Story-Based Intervention with Self-Modeling Treatment Package to Reduce Stereotypical Spitting Behavior in a Young Girl with Autism

    National Research Council Canada - National Science Library

    Nelson-Head, Cindy; Hill, Doris Adams; Flores, Margaret

    2012-01-01

    The purpose of this study was to investigate the use of a video story-based intervention with self-modeling to decrease spitting behavior in a female pre-school student with autism during an extended...

  3. CASE STUDY ON THE IMPLEMENTATION OF A VIDEO STORY-BASED INTERVENTION WITH SELF-MODELING TREATMENT PACKAGE TO REDUCE STEREOTYPICAL SPITTING BEHAVIOR IN A YOUNG GIRL WITH AUTISM

    National Research Council Canada - National Science Library

    Cindy Nelson-Head; Doris Adams Hill; Margaret Flores

    2012-01-01

      The purpose of this study was to investigate the use of a video story-based intervention with self-modeling to decrease spitting behavior in a female pre-school student with autism during an extended...

  4. Moving sand dunes

    CERN Document Server

    Sparavigna, Amelia Carolina

    2011-01-01

    In several desert areas, the slow motion of sand dunes can be a challenge for modern human activities and a threat for the survival of ancient places or archaeological sites. However, several methods exist for surveying the dune fields and estimate their migration rate. Among these methods, the use of satellite images, in particular of those freely available on the World Wide Web, is a convenient resource for the planning of future human settlements and activities.

  5. Booming Sand Dunes

    Science.gov (United States)

    Vriend, Nathalie

    "Booming" sand dunes are able to produce low-frequency sound that resembles a pure note from a music instrument. The sound has a dominant audible frequency (70-105 Hz) and several higher harmonics and may be heard from far distances away. A natural or induced avalanche from a slip face of the booming dune triggers the emission that may last for several minutes. There are various references in travel literature to the phenomenon, but to date no scientific explanation covered all field observations. This thesis introduces a new physical model that describes the phenomenon of booming dunes. The waveguide model explains the selection of the booming frequency and the amplification of the sound in terms of constructive interference in a confined geometry. The frequency of the booming is a direct function of the dimensions and velocities in the waveguide. The higher harmonics are related to the higher modes of propagation in the waveguide. The experimental validation includes quantitative field research at the booming dunes of the Mojave Desert and Death Valley National Park. Microphone and geophone recordings of the acoustic and seismic emission show a variation of booming frequency in space and time. The analysis of the sensor data quantifies wave propagation characteristics such as speed, dispersion, and nonlinear effects and allows the distinction between the source mechanism of the booming and the booming itself. The migration of sand dunes results from a complicated interplay between dune building, wind regime, and precipitation. The morphological and morphodynamical characteristics of two field locations are analyzed with various geophysical techniques. Ground-penetrating radar images the subsurface structure of the dunes and reveal a natural, internal layering that is directly related to the history of dune migration. The seismic velocity increases abruptly with depth and gradually increases with downhill position due to compaction. Sand sampling shows local

  6. An extreme breaching of a barrier spit: insights on large breach formation and its impact on barrier dynamics

    Science.gov (United States)

    Iulian Zăinescu, Florin; Vespremeanu-Stroe, Alfred; Tătui, Florin

    2017-04-01

    In this study, we document a case of exceptionally large natural breaching of a sandy spit (Sacalin barrier, Danube delta) using Lidar data and satellite imagery, annual (and seasonal) surveys of topography and bathymetry on successive cross-barrier profiles, and hourly datasets of wind and waves. The breach morphology and dynamics was monitored and described from its inception to closure, together with its impact on the adjoining features (upper shoreface, back-barrier lagoon, downdrift coast) and on the local sediment budgets. Breaching is first observed to occur on a beach-length of 0.5 km in April 2012 and two years later reached 3.5 km (May 2014). The barrier translates to a recovery stage dominated by continuous back-barrier deposition through subaqueous cross-breach sediment transport. Soon, the barrier widening triggers a negative feedback which limits the back-barrier sediment transfer. As a result, back-barrier deposition decreases whilst the barrier aggradation through overwash becomes more frequent. The event was found to be a natural experiment which switched the barrier's decadal evolution from low cross-shore transport to high cross-shore transport over the barrier. Although previously considered as constant, the cross-shore transport recorded during the large breach lifespan is an order of magnitude larger than in the non-breach period. 3 x 106 m3 of sediment were deposited in three years which is equivalent to the modelled longshore transport in the region. Nevertheless, the sediment circuits are more complex involving exchanges with the upper shoreface, as indicated by the extensive erosion down to -4m. In the absence of tides, the Sacalin breach closed naturally in 3 years and brings a valuable contribution on how breaches may evolve, as only limited data has been internationally reported until now. The very high deposition rate of sediment in the breach is a testimony of the high sediment volumes supplied by the longshore transport and the high

  7. Laboratory singing sand avalanches.

    Science.gov (United States)

    Dagois-Bohy, Simon; Ngo, Sandrine; du Pont, Sylvain Courrech; Douady, Stéphane

    2010-02-01

    Some desert sand dunes have the peculiar ability to emit a loud sound up to 110 dB, with a well-defined frequency: this phenomenon, known since early travelers (Darwin, Marco Polo, etc.), has been called the song of dunes. But only in late 19th century scientific observations were made, showing three important characteristics of singing dunes: first, not all dunes sing, but all the singing dunes are composed of dry and well-sorted sand; second, this sound occurs spontaneously during avalanches on a slip face; third this is not the only way to produce sound with this sand. More recent field observations have shown that during avalanches, the sound frequency does not depend on the dune size or shape, but on the grain diameter only, and scales as the square root of g/d--with g the gravity and d the diameter of the grains--explaining why all the singing dunes in the same vicinity sing at the same frequency. We have been able to reproduce these singing avalanches in laboratory on a hard plate, which made possible to study them more accurately than on the field. Signals of accelerometers at the flowing surface of the avalanche are compared to signals of microphones placed above, and it evidences a very strong vibration of the flowing layer at the same frequency as on the field, responsible for the emission of sound. Moreover, other characteristics of the booming dunes are reproduced and analyzed, such as a threshold under which no sound is produced, or beats in the sound that appears when the flow is too large. Finally, the size of the coherence zones emitting sound has been measured and discussed.

  8. Fortune Cookie Sand Dunes

    Science.gov (United States)

    2003-01-01

    MGS MOC Release No. MOC2-432, 25 July 2003This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image shows a field of small barchan sand dunes in the north polar region near 71.7oN, 51.3oW. Some of them are shaped like fortune cookies. The message these dunes provide: winds blow through this region from the lower right toward the upper left. The steep slip face slopes of these dunes, which point toward the upper left, indicate the wind direction. The scene is illuminated by sunlight from the upper right. The image is 3 km (1.9 mi) wide.

  9. Compressive behavior of fine sand.

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Bradley E. (Air Force Research Laboratory, Eglin, FL); Kabir, Md. E. (Purdue University, West Lafayette, IN); Song, Bo; Chen, Wayne (Purdue University, West Lafayette, IN)

    2010-04-01

    The compressive mechanical response of fine sand is experimentally investigated. The strain rate, initial density, stress state, and moisture level are systematically varied. A Kolsky bar was modified to obtain uniaxial and triaxial compressive response at high strain rates. A controlled loading pulse allows the specimen to acquire stress equilibrium and constant strain-rates. The results show that the compressive response of the fine sand is not sensitive to strain rate under the loading conditions in this study, but significantly dependent on the moisture content, initial density and lateral confinement. Partially saturated sand is more compliant than dry sand. Similar trends were reported in the quasi-static regime for experiments conducted at comparable specimen conditions. The sand becomes stiffer as initial density and/or confinement pressure increases. The sand particle size become smaller after hydrostatic pressure and further smaller after dynamic axial loading.

  10. Toxicokinetics of Naja sputatrix (Javan spitting cobra) venom following intramuscular and intravenous administrations of the venom into rabbits.

    Science.gov (United States)

    Yap, Michelle Khai Khun; Tan, Nget Hong; Sim, Si Mui; Fung, Shin Yee

    2013-06-01

    Existing protocols for antivenom treatment of snake envenomations are generally not well optimized due partly to inadequate knowledge of the toxicokinetics of venoms. The toxicokinetics of Naja sputatrix (Javan spitting cobra) venom was investigated following intravenous and intramuscular injections of the venom into rabbits using double-sandwich ELISA. The toxicokinetics of the venom injected intravenously fitted a two-compartment model. When the venom was injected intramuscularly, the serum concentration-time profile exhibited a more complex absorption and/or distribution pattern. Nevertheless, the terminal half-life, volume of distribution by area and systemic clearance of the venom injected intramuscularly were not significantly different (p > 0.05) from that of the venom injected intravenously. The systemic bioavailability of the venom antigens injected by intramuscular route was 41.7%. Our toxicokinetic finding is consistent with other reports, and may indicate that some cobra venom toxins have high affinity for the tissues at the site of injection. Our results suggest that the intramuscular route of administration doesn't significantly alter the toxicokinetics of N. sputatrix venom although it significantly reduces the systemic bioavailability of the venom. Copyright © 2013 Elsevier Ltd. All rights reserved.

  11. Namibia : triaxial test on sand

    DEFF Research Database (Denmark)

    Steenfelt, Jørgen S.; Jacobsen, Kim P.

    In connection with a harbour project the friction angle of a fine sand is required. On Friday 13 March 1998 the Danish Geotechnical Institute (DGI) delivered app. 2.5 kg sand for testing at the Geotechnical Engineering Laboratory, Aalborg University. The present Data Report summarises the results...

  12. Atlas of Dutch drift sands

    Science.gov (United States)

    Riksen, Michel; Jungerius, Pieter

    2013-04-01

    The Netherlands is well known for its aeolian landscapes. Frequent storms during the High Middle Ages (1000-1300 AD) reactivated Pleistocene coversands and river dunes and are responsible for the formation of the Holocene drift sands at a scale which is unique for Europe. A hypothesized relationship with farmer practices for making plaggensoils has recently been refuted, because drift sand formation began centuries earlier. The coastal dune belt with their parabolic dunes dates from the same period as the drift sand. An estimate of the extent of drift sands can be made from soil maps: drift sands are too young to show much profile development (Regosols). With this method Koster estimated the maximum extent of Holocene drift sands in the Netherlands to be about 800 km2 (Koster 2005). Laser altimetry allows a more precise estimate of the total surface affected by wind from the characteristic relief patterns produced by the Holocene wind, which is different from the smooth surface of cover sand deposits. Laser altimetry has been used before to investigate the mechanism of drift sand formation (Jungerius & Riksen 2010). Most of the surface affected by wind is not active anymore, but the tell-tale rough surface survived ages of different landuse. The total affected surface amounts to 825 km2. It is noteworthy that both methods give comparable results. We recorded a total number of 367 of affected areas of varying shapes, ranging in size from 1.6 ha to a large complex of drif sands of 7,119.5 ha. As is to be expected from their mode of origin, most occurrences are associated with cover sands, and with river dunes along the river Meuse and smaller rivers in other parts of the country. Particularly the final phases of cover sand and river dunes that show more relief as parabolic dunes were affected. There are also small aeolian deposits at the lee side blown from fallow agricultural fields but they are (sub)recent. Most of the relief is irregular, but the larger

  13. Impact of the Aegean Sea oil spill on the subtidal fine sand macrobenthic community of the Ares-Betanzos Ria (Northwest Spain)

    Energy Technology Data Exchange (ETDEWEB)

    Gomez Gesteira, J.L. [Vigo Univ. (Spain). Grupo de Fisica Oceanographic y de Costas; Dauvin, J.C. [Universite des Sciences et Technologies de Lille, Wimereux (France). Station Marine

    2005-09-01

    Two sites located in the sublittoral fine-sand macrobenthic community of the Ares-Betanzos Ria were sampled over four years (December 1992-November 1996) in the wake of the Aegean Sea oil spill. This sampling revealed that the petroleum had affected the structure and abundance of this community, as well as the number of taxa present. In this context, the results of the biotic index and the biotic coefficient were insufficient; however, study of the synthetic parameters, particularly through multivariate analysis, showed that the community went through three successive and distinct phases over time. A short period of high mortality in some species, especially amphipods, was followed by a period of low abundance that lasted until the spring of 1995. A period of recovery began in the second half of 1995 and continued through to the end of 1996, when the survey ended. The community showed a gradual evolution back towards the conditions observed immediately after the spill, when abundance of the more resistant species was still high. Despite this similarity, the last period exhibits a new structure, clearly separate from the two previous periods. This study provides information about the short-term effects of the Aegean Sea oil spill on the fine sand bottoms of the sites surveyed in the Ares-Betanzos Ria. This information could also serve as a baseline for identifying the effects of a more recent accident, the Prestige oil spill, in which similar communities in other Galician rias were polluted in 2002-2003. (author)

  14. 2010 oil sands performance report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    With the depletion of traditional energy resources and the rising demand for energy, oil sands have become an important energy resource for meeting energy needs. Oil sands are a mixture of water, sand, clay and bitumen which is recovered either through open pit mining or in situ drilling techniques. The bitumen is then converted into syncrude or sold to refineries for the production of gasoline, diesel or other products. Shell has oil sands operations in Alberta and the aim of this report is to present its 2010 performance in terms of CO2, water, tailings, land, and reclamation and engagement. This document covers several of Shell's operations in the Muskeg River and Jackpine mines, Scotford upgrader, Peace River, Orion, Seal, Cliffdale and Chipmunk. It provides useful information on Shell's oil sands performance to governments, environmental groups, First Nations, local communities and the public.

  15. The sublittoral macroflora of Hornsund

    Directory of Open Access Journals (Sweden)

    Agnieszka Tatarek

    2012-07-01

    Full Text Available Combined hydroacoustic, video and direct examination by scuba-diving of the underwater meadows of Hornsund, a flagship biodiversity site in Svalbard, revealed 17 species of macroalgae with a biomass, dominated by Laminariales, of as much as 3 kg m−2. The biomass dominants were Laminaria digitata and Saccharina latissima, which were most abundant at depths of between 5 and 10 m. The species data presented are the first records for the fjord and provide a starting point for new research and a baseline for future assessments of climate-induced changes.

  16. The shallow stratigraphy and sand resources offshore from Cat Island, Mississippi

    Science.gov (United States)

    Kindinger, Jack G.; Miselis, Jennifer L.; Buster, Noreen A.

    2014-01-01

    In collaboration with the U.S. Army Corps of Engineers, scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center collected over 487 line kilometers (> 300 miles) of high-resolution geophysical data around Cat Island, Mississippi, to improve understanding of the island's geologic evolution and identify potential sand resources for coastal restoration. In addition, 40 vibracores were collected on and around the island, generating more than 350 samples for grain-size analysis. The results indicate that the geologic evolution of Cat Island has been influenced by deltaic, lagoonal/estuarine, tidal, and oceanographic processes, resulting in a stratigraphic record that is quite complex. The region north of the island is dominated by lagoonal/estuarine deposition, whereas the region south of the island is dominated by deltaic and tidal deposition. In general, the veneer of modern sediment surrounding the island is composed of newly deposited sediment and highly reworked relict sediments. The region east of the island shows the interplay of antecedent barrier-island change with delta development despite a significant ravinement of sediments. The data show from little to no modern sediment east of the island, exposing relict sediments at the seafloor. Finally, the data reveal four subaqueous sand units around the island. Two of the units are northwest of the modern island and one is southwest. Given the dominant, westward, longshore transport along the Mississippi and Alabama barrier islands, the geographic location of these three units suggests that they do not contribute to the modern sediment budget of Cat Island. The last unit is directly east of the island and represents the antecedent island platform that has supplied sand over geologic time for creation of the spits that form the eastern shoreline. Because of its location east of the island, the antecedent island unit may still supply sediment to the island today.

  17. Pathogenesis of dermonecrosis induced by venom of the spitting cobra, Naja nigricollis: An experimental study in mice.

    Science.gov (United States)

    Rivel, Mario; Solano, Daniela; Herrera, María; Vargas, Mariángela; Villalta, Mauren; Segura, Álvaro; Arias, Ana Silvia; León, Guillermo; Gutiérrez, José María

    2016-09-01

    The pathogenesis of dermonecrosis induced by the venom of the African spitting cobra Naja nigricollis was investigated in a mouse model. Intradermal injection of venom induced a macroscopic necrotic lesion. Histological examination revealed early edema of the dermis, followed by blistering, loss of skin appendages and reduction in cellularity. By 24 h, necrosis of the dermis was evident, sections of epidermis were lost, and a fibrinoid hyaline material filled the damaged areas. Abundant inflammatory infiltrate was present in the hypodermis and basal dermis, and there was an increment in the expression of matrix metalloproteinases (MMPs). Thrombi were observed in blood vessels. Abundant cells were present in the dermis by 7 days. By 14 and 28 days, re-epithelization had occurred, collagen was widespread in the dermis, and few skin appendages were present. The RP-HPLC fractions that reproduced the necrotic activity were composed of low molecular mass cytotoxins of the three-finger toxin family and, to a lesser extent, of phospholipases A2 (PLA2). Inhibition of PLA2 of venom by p-bromophenacyl bromide did not reduce the area of necrosis, but modified the appearance of necrotic regions. Depletion of neutrophils and inhibition of venom metalloproteinases and tissue MMPs did not affect dermonecrosis. IgG and F(ab')2 antivenoms were effective in the neutralization of dermonecrosis when incubated with venom prior to injection. However, when antivenoms were administered immediately after venom injection, dermonecrosis was reduced only to a partial extent, underscoring the difficulties in neutralizing this effect with antivenoms. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Six isoforms of cardiotoxin in malayan spitting cobra (Naja naja sputatrix) venom: cloning and characterization of cDNAs.

    Science.gov (United States)

    Jeyaseelan, K; Armugam, A; Lachumanan, R; Tan, C H; Tan, N H

    1998-04-10

    Cardiotoxins are the most abundant toxin components of cobra venom. Although many cardiotoxins have been purified and characterized by amino acid sequencing and other pharmacological and biochemical studies, to date only five cardiotoxin cDNAs from Taiwan cobra (Naja naja atra), three cDNAs from Chinese cobra (Naja atra) and two more of uncertain origin (either Chinese or Taiwan cobra) have been reported. In this paper we show the existence of four isoforms of cardiotoxin by protein analysis and nine cDNA sequences encoding six isoforms of cardiotoxins (CTX 1-3, 4a, 4b and 5) from N. n. sputatrix by cDNA cloning. This forms the first report on the cloning and characterization of several cardiotoxin genes from a single species of a spitting cobra. The cDNAs encoding these isoforms, obtained by reverse transcription-polymerase chain reaction (RT-PCR), were subsequently expressed in Escherichia coli. The native and recombinant cardiotoxins were first characterized by Western blotting and N-terminal protein sequencing. These proteins were also found to have different levels of cytolytic activity on cultured baby hamster kidney cells. Four of the isoforms (CTX 1, 2, 4 and 5) are unique to N. n. sputatrix, with CTX 2 being the most abundant species constituting about 50% of the total cardiotoxins. The isoform CTX 3 (20% constitution) is highly homologous to the cardiotoxins of N. n. atra and N. n. naja, indicating that it may be universally present in all Naja naja subspecies. Our studies suggest that the most hydrophilic isoform (CTX 5) could have evolved first followed by the hydrophobic isoforms (CTX 1, 2, 3 and 4). We also speculate that Asiatic cobras could be the modern descendants of the African and Egyptian counterparts. Copyright 1998 Elsevier Science B. V.

  19. Spectroscopic characterization of a Nigerian standard sand: Igbokoda sand

    CSIR Research Space (South Africa)

    Ojuri, OO

    2017-01-01

    Full Text Available the Middle Ordovician St. Peter Sandstone near Ottawa, Illinois, had been picked by the American Society for Testing and Materials (ASTM) as the reference sand to employ in testing cement and strength of concrete [9]. To the best of our knowledge... and magnetic resonance spectroscopic techniques due to its importance in cement, geotechnical/geo-environmental research in Nigeria. This should halt importation of standard silica sand for mortar and concrete testing...

  20. Characterization of sand lenses embedded in tills

    DEFF Research Database (Denmark)

    Kessler, Timo Christian; Klint, K.E.S.; Nilsson, B.

    2012-01-01

    Tills dominate large parts of the superficial sediments on the Northern hemisphere. These glacial diamictons are extremely heterogeneous and riddled with fractures and lenses of sand or gravel. The frequency and geometry of sand lenses within tills are strongly linked to glaciodynamic processes...... occurring in various glacial environments. This study specifically focuses on the appearance and spatial distribution of sand lenses in tills. It introduces a methodology on how to measure and characterize sand lenses in the field with regard to size, shape and degree of deformation. A set of geometric...... parameters is defined to allow characterization of sand lenses. The proposed classification scheme uses a stringent terminology to distinguish several types of sand lenses based on the geometry. It includes sand layers, sand sheets, sand bodies, sand pockets and sand stringers. The methodology has been...

  1. Venom ophthalmia caused by venoms of spitting elapid and other snakes: Report of ten cases with review of epidemiology, clinical features, pathophysiology and management.

    Science.gov (United States)

    Chu, Edward R; Weinstein, Scott A; White, Julian; Warrell, David A

    2010-09-01

    Venom ophthalmia caused by venoms of spitting elapid and other snakes: report of ten cases with review of epidemiology, clinical features, pathophysiology and management. Chu, ER, Weinstein, SA, White, J and Warrell, DA. Toxicon XX:xxx-xxx. We present ten cases of ocular injury following instillation into the eye of snake venoms or toxins by spitting elapids and other snakes. The natural history of spitting elapids and the toxinology of their venoms are reviewed together with the medical effects and management of venom ophthalmia in humans and domestic animals including both direct and allergic effects of venoms. Although the clinical features and management of envenoming following bites by spitting elapids (genera Naja and Hemachatus) are well documented, these snakes are also capable of "spraying" venom towards the eyes of predators, a defensive strategy that causes painful and potentially blinding ocular envenoming (venom ophthalmia). Little attention has been given to the detailed clinical description, clinical evolution and efficacy of treatment of venom ophthalmia and no clear management guidelines have been formulated. Knowledge of the pathophysiology of ocular envenoming is based largely on animal studies and a limited body of clinical information. A few cases of ocular exposure to venoms from crotaline viperids have also been described. Venom ophthalmia often presents with pain, hyperemia, blepharitis, blepharospasm and corneal erosions. Delay or lack of treatment may result in corneal opacity, hypopyon and/or blindness. When venom is "spat" into the eye, cranial nerve VII may be affected by local spread of venom but systemic envenoming has not been documented in human patients. Management of venom ophthalmia consists of: 1) urgent decontamination by copious irrigation 2) analgesia by vasoconstrictors with weak mydriatic activity (e.g. epinephrine) and limited topical administration of local anesthetics (e.g. tetracaine) 3) exclusion of corneal abrasions

  2. Reclaimability of the spent sand mixture – sand with bentonite – sand with furfuryl resin

    Directory of Open Access Journals (Sweden)

    J. Dańko

    2011-04-01

    Full Text Available Introduction of new binding materials and new technologies of their hardening in casting moulds and cores production requires theapplication of reclamation methods adequate to their properties as well as special devices realizing tasks. The spent sands circulationsystem containing the same kind of moulding and core sands is optimal from the point of view of the expected reclamation results.However, in the face of a significant variability of applied technologies and related to them various reclamation methods, the need - of theobtained reclamation products assessment on the grounds of systematic criteria and uniform bases – arises, with a tendency of indicatingwhich criteria are the most important for the given sand system. The reclaimability results of the mixture of the spent moulding sand withGeko S bentonite and the spent core sand with the Kaltharz 404U resin hardened by acidic hardener 100 T3, are presented in the paper.Investigations were performed with regard to the estimation of an influence of core sands additions (10 –25% on the reclaimed materialquality. Dusts and clay content in the reclaim, its chemical reaction (pH and ignition loss were estimated. The verification of the reclaiminstrumental assessment was performed on the basis of the technological properties estimation of moulding sand with bentonite, where the reclaimed material was used as a matrix.

  3. Management recommendations: Sand Lake Complex

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a review of land management practices at the Sand Lake National Wildlife Refuge, by a land use specialist. Recommendations, time frame and...

  4. Sensuous Communism: Sand with Marx

    OpenAIRE

    White, Claire

    2015-01-01

    This article reads George Sand's Le Compagnon du Tour de France (1840) alongside Karl Marx's “Economic and Philosophic Manuscripts of 1844.” It considers how these contemporaries bring to bear on their accounts of labor, estrangement, and the structures of property an attention to the fate of the senses under capitalism. Both elaborate a critique of political economy—Sand's voiced by her worker-hero—that demonstrates how the individual's sensuous life is circumscribed by the pressures of mate...

  5. Disturbance of the inclined inserting-type sand fence to wind-sand flow fields and its sand control characteristics

    Science.gov (United States)

    Cheng, Jian-jun; Lei, Jia-qiang; Li, Sheng-yu; Wang, Hai-feng

    2016-06-01

    The inclined inserting-type sand fence is a novel sand retaining wall adopted along the Lanxin High-Speed Railway II in Xinjiang for controlling and blocking sand movement. To verify the effectiveness of the new fence structure for sand prevention, a wind tunnel test was used for flow field test simulation of the sand fence. The results indicate that the inclined inserting-type sand fence was able to deflect the flow of the sand and was able to easily form an upward slant acceleration zone on the leeward side of the sand fence. As shown by the percentage change in sand collection rates on the windward side and the leeward side of the sand fence, the sand flux per unit area at 4 m height in the slant upward direction increased on the leeward side of the inclined inserting-type sand fence. By comparing the flow fields, this site is an acceleration zone, which also reaffirms the correspondence of wind-sand flow fields with the spatial distribution characteristic of the wind-carried sand motion. The field sand collection data indicates that under the effects of the inclined inserting-type sand fence, the sandy air currents passing in front and behind the sand fence not only changed in quality, but the grain composition and particle size also significantly changed, suggesting that the inclined inserting-type sand fence has a sorting and filtering effect on the sandy air currents that passed through. The fence retained coarse particulates on the windward side and fine particulates within the shade of the wind on the leeward side.

  6. Optimal array of sand fences

    Science.gov (United States)

    Lima, Izael A.; Araújo, Ascânio D.; Parteli, Eric J. R.; Andrade, José S.; Herrmann, Hans J.

    2017-03-01

    Sand fences are widely applied to prevent soil erosion by wind in areas affected by desertification. Sand fences also provide a way to reduce the emission rate of dust particles, which is triggered mainly by the impacts of wind-blown sand grains onto the soil and affects the Earth’s climate. Many different types of fence have been designed and their effects on the sediment transport dynamics studied since many years. However, the search for the optimal array of fences has remained largely an empirical task. In order to achieve maximal soil protection using the minimal amount of fence material, a quantitative understanding of the flow profile over the relief encompassing the area to be protected including all employed fences is required. Here we use Computational Fluid Dynamics to calculate the average turbulent airflow through an array of fences as a function of the porosity, spacing and height of the fences. Specifically, we investigate the factors controlling the fraction of soil area over which the basal average wind shear velocity drops below the threshold for sand transport when the fences are applied. We introduce a cost function, given by the amount of material necessary to construct the fences. We find that, for typical sand-moving wind velocities, the optimal fence height (which minimizes this cost function) is around 50 cm, while using fences of height around 1.25 m leads to maximal cost.

  7. Sands at Gusev Crater, Mars

    Science.gov (United States)

    Cabrol, Nathalie A.; Herkenhoff, Kenneth E.; Knoll, Andrew H.; Farmer, Jack D.; Arvidson, Raymond E.; Grin, E.A.; Li, Ron; Fenton, Lori; Cohen, B.; Bell, J.F.; Yingst, R. Aileen

    2014-01-01

    Processes, environments, and the energy associated with the transport and deposition of sand at Gusev Crater are characterized at the microscopic scale through the comparison of statistical moments for particle size and shape distributions. Bivariate and factor analyses define distinct textural groups at 51 sites along the traverse completed by the Spirit rover as it crossed the plains and went into the Columbia Hills. Fine-to-medium sand is ubiquitous in ripples and wind drifts. Most distributions show excess fine material, consistent with a predominance of wind erosion over the last 3.8 billion years. Negative skewness at West Valley is explained by the removal of fine sand during active erosion, or alternatively, by excess accumulation of coarse sand from a local source. The coarse to very coarse sand particles of ripple armors in the basaltic plains have a unique combination of size and shape. Their distribution display significant changes in their statistical moments within the ~400 m that separate the Columbia Memorial Station from Bonneville Crater. Results are consistent with aeolian and/or impact deposition, while the elongated and rounded shape of the grains forming the ripples, as well as their direction of origin, could point to Ma'adim Vallis as a possible source. For smaller particles on the traverse, our findings confirm that aeolian processes have dominated over impact and other processes to produce sands with the observed size and shape patterns across a spectrum of geologic (e.g., ripples and plains soils) and aerographic settings (e.g., wind shadows).

  8. Sands at Gusev Crater, Mars

    Science.gov (United States)

    Cabrol, Nathalie A.; Herkenhoff, Kenneth; Knoll, Andrew H.; Farmer, Jack; Arvidson, Raymond; Grin, Edmond; Li, Ronxing; Fenton, Lori; Cohen, Barbara; Bell, James F.; Aileen Yingst, R.

    2014-05-01

    Processes, environments, and the energy associated with the transport and deposition of sand at Gusev Crater are characterized at the microscopic scale through the comparison of statistical moments for particle size and shape distributions. Bivariate and factor analyses define distinct textural groups at 51 sites along the traverse completed by the Spirit rover as it crossed the plains and went into the Columbia Hills. Fine-to-medium sand is ubiquitous in ripples and wind drifts. Most distributions show excess fine material, consistent with a predominance of wind erosion over the last 3.8 billion years. Negative skewness at West Valley is explained by the removal of fine sand during active erosion, or alternatively, by excess accumulation of coarse sand from a local source. The coarse to very coarse sand particles of ripple armors in the basaltic plains have a unique combination of size and shape. Their distribution display significant changes in their statistical moments within the ~400 m that separate the Columbia Memorial Station from Bonneville Crater. Results are consistent with aeolian and/or impact deposition, while the elongated and rounded shape of the grains forming the ripples, as well as their direction of origin, could point to Ma'adim Vallis as a possible source. For smaller particles on the traverse, our findings confirm that aeolian processes have dominated over impact and other processes to produce sands with the observed size and shape patterns across a spectrum of geologic (e.g., ripples and plains soils) and aerographic settings (e.g., wind shadows).

  9. CASE STUDY ON THE IMPLEMENTATION OF A VIDEO STORY-BASED INTERVENTI­ON WITH SELF-MODELING TREATMENT PACKAGE TO REDUCE STEREOTYPICAL SPITTING BEHAVIOR IN A YOUNG GIRL WITH AUTISM

    National Research Council Canada - National Science Library

    Cindy NELSON-HEAD; Doris ADAMS HILL; Margaret FLORES

    2012-01-01

    The purpose of this study was to investigate the use of a video story-based intervention with self-modeling to decrease spitting behavior in a female pre-school student with autism during an extended school year ser­vices program...

  10. Spitting for Science

    DEFF Research Database (Denmark)

    Athanasiadis, Georgios; Jorgensen, Frank G.; Cheng, Jade Y.

    2016-01-01

    Scientific outreach delivers science to the people. But it can also deliver people to the science. In this work, we report our experience from a large-scale public engagement project promoting genomic literacy among Danish high school students with the additional benefit of collecting data...

  11. Using a commercially available DNA extraction kit to obtain high quality human genomic DNA suitable for PCR and genotyping from 11-year-old saliva saturated cotton spit wads

    Directory of Open Access Journals (Sweden)

    Hudziak James J

    2008-12-01

    Full Text Available Abstract Background We sought to describe the integrity of human genomic DNA extracted from saliva saturated cotton spit wads stored at -20°C for approximately 11 years. 783 spit wad samples were collected from an ADHD sample population (Vermont Family Study during 1996–2000. Human genomic DNA was extracted from the spit wads using a commercially available kit; QIAamp DNA Blood Midi Kit (Qiagen, Inc., Valencia, CA. with a few modifications. Results The resulting DNA yield was more than adequate for genetic analysis and ranged from approximately 1 μg to a total of 80 μg (mean 17.3 μgs ± 11.9 μgs. A260/A280 ratios for the human genomic DNA extracted from the spit wads was consistently within the generally acceptable values of 1.7–2.0, with the lowest purity being 1.70, and a mean value of 1.937 ± 0.226 for the 783 samples. The DNA also was suitable for PCR reactions as evidenced by the amplification of the serotonin-transporter-linked polymorphic region, 5HTTLPR. 5HTTLPR is a functional polymorphism in the promoter region of the serotonin transporter gene (HTT, SLC6A4, or SERT, consisting of two intensively studied alleles. 770 of the 783 samples (98.3% produced fragments after PCR of the expected size with primers specific for 5HTTLPR. Conclusion High quality and abundant genomic DNA can be successfully retrieved from saliva saturated cotton spit wads using the commercially available kit, QIAamp DNA Blood Midi Kit from Qiagen, Inc. Furthermore, the DNA can be extracted in less than 3 hours and multiple samples can be processed simultaneously thus reducing processing time.

  12. Settling Tube Analysis of Sand

    NARCIS (Netherlands)

    Geldof, H.J.; Slot, R.E.

    1979-01-01

    For various reasons particle-size analysis of sediment is used in many fields of science and technology, a.o. earth sciences, agricultural and civil engineering. Relatively coarse-grained sediment like sand, with dimensions ranging from 0.06 till 2 mm, is analyzed almost exclusively by sieving. The

  13. Silo model tests with sand

    DEFF Research Database (Denmark)

    Munch-Andersen, Jørgen

    Tests have been carried out in a large silo model with Leighton Buzzard Sand. Normal pressures and shear stresses have been measured during tests carried out with inlet and outlet geometry. The filling method is a very important parameter for the strength of the mass and thereby the pressures...

  14. Sand and Water Table Play

    Science.gov (United States)

    Wallace, Ann H.; White, Mary J.; Stone, Ryan

    2010-01-01

    The authors observed preschoolers engaged at the sand and water table to determine if math could be found within their play. Wanting to understand how children interact with provided materials and what kinds of math ideas they explore during these interactions, the authors offer practical examples of how such play can promote mathematical…

  15. V-2 at White Sands

    Science.gov (United States)

    1947-01-01

    A V-2 rocket is hoisted into a static test facility at White Sands, New Mexico. The German engineers and scientists who developed the V-2 came to the United States at the end of World War II and continued rocket testing under the direction of the U. S. Army, launching more than sixty V-2s.

  16. Ti-Zr placer mineralization in Neoproterozoic (Uppe r Riphean rocks of Kildin Formation and in contemporary beach sands of Sredny and Rybachy Peninsulas, Kola Region

    Directory of Open Access Journals (Sweden)

    Chickiryov I. V.

    2017-03-01

    Full Text Available Concentration mechanisms of titanium-zirconium placer mineralizat ion in Neoproterozoic terrigenous rocks of Zemlepakhtinskaya Formation, Kildin Group, and in contempo rary beach deposits from Sredny Peninsula and Motka Cape from Rybachy Peninsula (Kola region have been considered i n the paper. It has been shown that the rocks of Zemlepakhtinskaya Formation are facially variable. The shallow littoral facies are confined to the western and central parts of Sredny Peninsula, the deeper sublitt oral facies are confined to the eastern part of Sredny Peninsula and to Motka Cape of Rybachy Peninsula. It has b een established that lenses and beds with titanium-zirconium placer mineralization occur solely in littoral facies. The ore minerals in aleurite-psamite of Zemlepakhtinskaya Formation are represented by leucoxene, rutile and zircon, and in contemporary beach deposits – by ilmenite, rutile and minor zircon. Paleogeograp hic reconstruction indicates that almost all deposits of Neoproterozoic (Upper Riphean Kildin Group were accumulated in shallow (littoral and sublittoral environment during dominant humid climate and intense weat hering of source area. Thus, not only deposits of Zemlepakhtinskaya Formation, but also the whole succession of Kildin Group can be regarded perspective for placers' accumulation. The low grade of heavy minerals (mainly Ti an d Zr minerals in contemporary beach deposits from Sredny Peninsula and Motka Cape from Rybachy Peninsu la is related to weak weathering of the Baltic Shield during Quaternary and to accumulation of coarse debris in littoral zone, preventing the differentiation of sand by wave action.

  17. The eolian sand problems arising from desertification.

    Science.gov (United States)

    Bofah, K K; Owusu, Y A

    1986-05-01

    Eolian (wind blown) sand constitutes a very serious problem to development in sandy desert lands and causes equally serious problems in lands that are undergoing desertification. In this paper, eolian sand movement due to bulk movement such as sand dune and ripple movement, sand drift by saltation, and sand storms by strong winds are discussed. Associated problems such as eolian sand encroachment on highways, farms, communities and industrial complexes are also discussed and workable solutions are offered. Solutions include chemical stabilization of the surface grains, fences to trap the blown sand and vegetation to prevent soil deflation. Vegetation is emphasized and recommended as the ultimate viable solution to combat desertification and eolian sand problems.

  18. A new genus of Ectinosomatidae (Copepoda, Harpacticoida from sublittoral sediments in Ubatuba, São Paulo State, Brazil, including an updated key to genera and notes on Noodtiella Wells, 1965

    Directory of Open Access Journals (Sweden)

    Terue Kihara

    2009-08-01

    Full Text Available Both sexes of a new genus and species of Ectinosomatidae (Copepoda, Harpacticoida from sublittoral sediments collected on the inner continental shelf in Ubatuba, São Paulo State (Brazil are described in detail. Chaulionyx gen. n. (type species: C. paivacarvalhoi sp. n. differs from all known genera in the presence of a conspicuous bifid spine on the prehensile P1 endopod. It can be differentiated from other genera with a prehensile endopod (Halophytophilus Brian, 1919; Bradyellopsis Brian, 1925; Klieosoma Hicks & Schriever, 1985 by the presence of distinctive subrectangular middorsal pores on the urosomites and the unarmed male sixth legs. The genus Lineosoma Wells, 1965 is recognized as a paraphyletic taxon and relegated to a junior subjective synonym of Noodtiella Wells, 1965. Arenosetella pectinata Chappuis, 1954a is removed from its floating position in Ectinosomoides Nicholls, 1945, transferred to the genus Noodtiella as N. pectinata comb. n. and considered the senior subjective synonym of N. toukae Mitwally & Montagna, 2001. Dichotomous keys are provided for the identification of the 18 valid species of Noodtiella and the 21 valid genera of the family Ectinosomatidae. Halophytophilus aberrans Wells & Rao, 1987 is placed species incertae sedis in the family.

  19. experimental studies of sand production from unconsolidated

    African Journals Online (AJOL)

    ES Obe

    consolidated samples has been used to simulate the effect of flow rates, confining pressure, pressure drawdown and fluid viscosity on sand production in the Niger. Delta. The model was also used to determine the ability of using the flow rate to control the production of sand. Sand sample from an unconsolidated reser-.

  20. Comparative study of the cytolytic activity of snake venoms from African spitting cobras (Naja spp., Elapidae) and its neutralization by a polyspecific antivenom.

    Science.gov (United States)

    Méndez, Ileana; Gutiérrez, José María; Angulo, Yamileth; Calvete, Juan J; Lomonte, Bruno

    2011-11-01

    Venoms of several Naja species found in Sub-Saharan Africa, and commonly known as "spitting cobras", induce a predominantly cytotoxic pattern of envenomings that may evolve into tissue necrosis and gangrene. Cytotoxic components of their venoms have been identified as members of the three-finger toxin and phospholipase A(2) protein families. In this study, an in vitro assay using the myogenic cell line C2C12, was utilized to compare the cytolytic activities of venoms from five species of spitting cobras: Naja nigricollis, Naja katiensis, Naja pallida, Naja nubiae, and Naja mossambica. These venoms were strongly cytotoxic, causing a 50% effect at ~1.5 μg/well (15 μg/ml), except for N. katiensis venom, which required nearly twice this amount. Using the cell-based assay, the ability of an equine polyspecific antivenom (EchiTab-Plus-ICP) to neutralize cytotoxicity was assessed. The antivenom completely inhibited the cytotoxic activity of all five venoms, although high antivenom/venom ratios were needed. Neutralization curves displayed the following decreasing order of efficiency: N. nubiae > N. pallida > N. mossambica > N. nigricollis > N. katiensis. Results indicate that neutralizing antibodies toward toxins responsible for this particular effect are present in the antivenom, albeit in low titers. Fucoidan, a natural sulfated polysaccharide known to inhibit the toxic effects of some basic snake venom components, was unable to reduce cytotoxicity of Naja venoms. Results emphasize the need of enhancing the immunogenicity of low molecular mass toxins during antivenom production, as well as to search for useful toxin inhibitors which could complement antivenom therapy. Copyright © 2011 Elsevier Ltd. All rights reserved.

  1. The ghost of a recent invasion in the reduced feeding rates of spitting cobras during the dry season in a rainforest region of tropical Africa?

    Science.gov (United States)

    Luiselli, Luca

    2001-12-01

    Two species of cobras ( Naja melanoleuca and Naja nigricollis) are known to occur in south eastern Nigeria, where much of the pristine rainforest surface has been felled in the last thirty years, and where the actual landscape is generally constituted by a mosaic of farmlands, plantations, suburban areas, with a few remnant forest fragments. In this region, Naja nigricollis is currently extending its range, especially by exploiting recently deforested areas. Based on the known general distribution range of this species and on the available literature data, it appears that Naja nigricollis has been colonizing the forested region of south eastern Nigeria, starting from the relatively arid savannas of central Nigeria, where this species aestivates during the driest months. In the forest region, however, snakes do not need to aestivate during the dry season. Nevertheless, whereas Naja melanoleuca has a foraging activity extended all-the-year round, Naja nigricollis reduces feeding rates during the dry months, although it does not suspend above-ground activity in these months. I suggest that rainforest spitting cobras suspend feeding during the dry months because their behaviour is just a 'ghost' of their recent past, when they were 'normal' spitting cobras of dry savana regions, which were thus constrained to aestivate during the dry season as it is the rule in this species in central and northern Nigeria. The 'gost-of-the-past hypothesis' seems to fit well with the 'invading' presence of Naja nigricollis in Nigerian areas where they were reported as rare or, even, absent, up to a few decades ago. Other hypotheses are discussed, and rejected.

  2. Reframing the Canadian Oil Sands

    OpenAIRE

    Patchett, Merle M; Lozowy, A

    2012-01-01

    Reframing the Canadian Oil Sands” is a collaborative exchange between photographer Andriko Lozowy and cultural geographer Merle Patchett that engages photography and photographic theory to evoke a more critical and politically meaningful visual engagement with the world’s largest capital oil project. Since the appearance of Edward Burtynsky’s aerial and abstracted photographic-mappings of the region, capturing the scale of the Oil Sands from ‘on high’ has become the dominant visual imaginary....

  3. Rheological Characterization of Green Sand Flow

    DEFF Research Database (Denmark)

    Jabbaribehnam, Mirmasoud; Spangenberg, Jon; Hovad, Emil

    2016-01-01

    The main aim of this paper is to characterize experimentally the flow behaviour of the green sand that is used for casting of sand moulds. After the sand casting process is performed, the sand moulds are used for metal castings. The rheological properties of the green sand is important to quantify...... module for characterizing granular materials. The new module enables viscosity measurements of the green sand as function of the shear rate at different flow rates, i.e. 0, 2, 4, 6, 8, 10, 12 and 15 L/min. The results show generally that the viscosity decreases with both the shear- and flow rate....... In addition, the measurements show that the green sand flow follows a shear-thinning behaviour even after the full fluidization point....

  4. Role of Sand Grains in Sorption Processes by Surface Layers of Components of Sand Moulds

    Directory of Open Access Journals (Sweden)

    Kaźnica N.

    2017-03-01

    Full Text Available The results of researches of sorption processes of surface layers of components of sand moulds covered by protective coatings are presented in the hereby paper. Investigations comprised various types of sand grains of moulding sands with furan resin: silica sand, reclaimed sand and calcined in temperature of 700°C silica sand. Two kinds of alcoholic protective coatings were used - zirconium and zirconium - graphite. Tests were performed under condition of a constant temperature within the range 30 - 35°C and high relative air humidity 75 - 80%. To analyze the role of sand grains in sorption processes quantitavie moisture sorption with use of gravimetric method and ultrasonic method were used in measurements. The tendency to moisture sorption of surface layers of sand moulds according to the different kinds of sand grains was specified. The effectiveness of protective action of coatings from moisture sorption was analyzed as well.

  5. Evaluation of Durability Parameters of Concrete with Manufacture Sand and River Sand

    Science.gov (United States)

    Sangoju, Bhaskar; Ramesh, G.; Bharatkumar, B. H.; Ramanjaneyulu, K.

    2017-09-01

    Most of the states in our country have banned sand quarrying from the river beds, causing a scarcity of natural river sand for the construction sector. Manufacture sand (M-sand) is one of the alternate solutions to replace the river sand (R-sand) in concrete. The main aim of the present study is to evaluate the durability parameters of concrete with M-sand when compared to that of concrete with R-sand. Corrosion of reinforcement is one of the main deteriorating mechanisms of reinforced concrete due to the ingress of chloride ions or carbon-di-oxide. For comparative evaluation of durability parameters, accelerated tests such as Rapid Chloride Permeability Test, Rapid Chloride Migration Test and accelerated carbonation test were carried out on specimens of R-sand and M-sand. All tests were carried out after 90 days of casting. Test results reveal that the durability parameters of the concrete with M-sand in chloride induced environment is relatively better than that of concrete with R-sand and hence is recommended to use M-sand as a replacement to R-sand.

  6. SAND

    DEFF Research Database (Denmark)

    Thorsen, Grete

    Der er udført et konsolideringsforsøg med bakkesand fra Lunds grusgrav, Lund no. O. forsøget er udført i samme konsolideringsapparat, som er anvendt til måling af deformationsegenskaberne af mange forskellige danske jordarter. Forsøgsresultaterne er søgt tolket som ved forsøg med andre jordarter....

  7. Preliminary assessments of the occurrence and effects of utilization of sand and aggregate resources of the Louisiana inner shelf

    Science.gov (United States)

    Suter, J.R.; Mossa, J.; Penland, S.

    1989-01-01

    Louisiana is experiencing the most critical coastal erosion and land loss problem in the United States. Shoreline erosion rates exceed 6 m/yr in more than 80% of the Louisiana coastal zone and can be up to 50 m/yr in areas impacted by hurricanes. The barrier islands have decreased in area by some 40% since 1880. Land loss from coastal marshlands and ridgelands from both natural and human-induced processes is estimated to exceed 100 km2/yr. In response, a two-phase plan has been established, calling for barrier-island restoration and beach nourishment, both requiring large amounts of sand. The plan will be cost-effective only if sand can be found offshore in sufficient quantities close to project sites. To locate such deposits, the Louisiana Geological Survey is conducting an inventory of nearshore sand resources on the Louisiana continental shelf. Exploration for offshore sand deposits is conducted in two phases, with high-resolution seismic reflection profiling to locate potential sand bodies followed by vibracoring to confirm seismic intepretations and obtain samples for textural characterization. As part of the initial stages of the program, reconnaissance high-resolution seismic investigations of three areas of the continental shelf representing different stages in the evolutionary sequence of barrier shorelines were carried out. The Timbalier Islands, flanking barriers of the eroding Caminada-Moreau headland, contain potential sand resources associated with buried tidal and distributary channels. The Chandeleur Islands, a barrier-island arc, have potential offshore sands in the form of truncated spit and tidal inlet deposits, submerged beach ridges, and distributary channels. Trinity Shoal, an inner shelf shoal, is an offshore feature containing up to 2 ?? 109 m3 of material, most of which is probably fine sand. These reconnaissance surveys have demonstrated the occurrence of sand resources on the Louisiana continental shelf. Utilization of such deposits for

  8. Crest line minimal model for sand dune

    OpenAIRE

    Guignier, Lucie; Valance, Alexandre; Lague, Dimitri

    2013-01-01

    International audience; In desert, complex patterns of dunes form. Under unidirectional wind, transverse rectilinear dunes or crescent shaped dunes called barchan dunes can appear, depending on the amount of sediment available. Most rectilinear transverse sand dunes are observed to fragment, for example at White Sands (New Mexico, United States of America) or Walvis Bay (Namibia). We develop a reduced complexity model to investigate the morphodynamics of sand dunes migrating over a non-erodib...

  9. Crushed rock sand – An economical and ecological alternative to natural sand to optimize concrete mix

    Directory of Open Access Journals (Sweden)

    Sanjay Mundra

    2016-09-01

    Full Text Available The study investigates the use of crushed rock sand as viable alternative to Natural River sand that is being conventionally used as fine aggregate in cement concrete. Various mix designs were developed for different grades of concrete based on IS, ACI and British codes using Natural River sand and crushed rock sand. In each case, the cube compressive strength test, and beam flexure tests were conducted. The results of the study show that, the strength properties of concrete using crushed rock sand are nearly similar to the conventional concrete. The study has shown that crushed stone sand can be used as economic and readily available alternative to river sand and can therefore help to arrest the detrimental effects on the environment caused due to excessive mining of river sand.

  10. Simulating and understanding sand wave variation: a case study of the Golden Gate sand waves

    NARCIS (Netherlands)

    Sterlini-Van der Meer, Fenneke; Hulscher, Suzanne J.M.H.; Hanes, D.M

    2009-01-01

    In this paper we present a detailed comparison between measured features of the Golden Gate sand wave field and the results of a nonlinear sand wave model. Because the Golden Gate sand waves exhibit large variation in their characteristics and in their environmental physics, this area gives us the

  11. 3D flow in the venom channel of a spitting cobra: do the ridges in the fangs act as fluid guide vanes?

    Science.gov (United States)

    Triep, Michael; Hess, David; Chaves, Humberto; Brücker, Christoph; Balmert, Alexander; Westhoff, Guido; Bleckmann, Horst

    2013-01-01

    The spitting cobra Naja pallida can eject its venom towards an offender from a distance of up to two meters. The aim of this study was to understand the mechanisms responsible for the relatively large distance covered by the venom jet although the venom channel is only of micro-scale. Therefore, we analysed factors that influence secondary flow and pressure drop in the venom channel, which include the physical-chemical properties of venom liquid and the morphology of the venom channel. The cobra venom showed shear-reducing properties and the venom channel had paired ridges that span from the last third of the channel to its distal end, terminating laterally and in close proximity to the discharge orifice. To analyze the functional significance of these ridges we generated a numerical and an experimental model of the venom channel. Computational fluid dynamics (CFD) and Particle-Image Velocimetry (PIV) revealed that the paired interior ridges shape the flow structure upstream of the sharp 90° bend at the distal end. The occurrence of secondary flow structures resembling Dean-type vortical structures in the venom channel can be observed, which induce additional pressure loss. Comparing a venom channel featuring ridges with an identical channel featuring no ridges, one can observe a reduction of pressure loss of about 30%. Therefore it is concluded that the function of the ridges is similar to guide vanes used by engineers to reduce pressure loss in curved flow channels.

  12. 3D flow in the venom channel of a spitting cobra: do the ridges in the fangs act as fluid guide vanes?

    Directory of Open Access Journals (Sweden)

    Michael Triep

    Full Text Available The spitting cobra Naja pallida can eject its venom towards an offender from a distance of up to two meters. The aim of this study was to understand the mechanisms responsible for the relatively large distance covered by the venom jet although the venom channel is only of micro-scale. Therefore, we analysed factors that influence secondary flow and pressure drop in the venom channel, which include the physical-chemical properties of venom liquid and the morphology of the venom channel. The cobra venom showed shear-reducing properties and the venom channel had paired ridges that span from the last third of the channel to its distal end, terminating laterally and in close proximity to the discharge orifice. To analyze the functional significance of these ridges we generated a numerical and an experimental model of the venom channel. Computational fluid dynamics (CFD and Particle-Image Velocimetry (PIV revealed that the paired interior ridges shape the flow structure upstream of the sharp 90° bend at the distal end. The occurrence of secondary flow structures resembling Dean-type vortical structures in the venom channel can be observed, which induce additional pressure loss. Comparing a venom channel featuring ridges with an identical channel featuring no ridges, one can observe a reduction of pressure loss of about 30%. Therefore it is concluded that the function of the ridges is similar to guide vanes used by engineers to reduce pressure loss in curved flow channels.

  13. Effect of Mucuna pruriens Seed Extract Pretreatment on the Responses of Spontaneously Beating Rat Atria and Aortic Ring to Naja sputatrix (Javan Spitting Cobra Venom

    Directory of Open Access Journals (Sweden)

    Shin Yee Fung

    2012-01-01

    Full Text Available Mucuna pruriens Linn. (velvet bean has been used by native Nigerians as a prophylactic for snakebite. Rats pretreated with M. pruriens seed extract (MPE have been shown to protect against the lethal and cardiovascular depressant effects of Naja sputatrix (Javan spitting cobra venoms, and the protective effect involved immunological neutralization of the venom toxins. To investigate further the mechanism of the protective effect of MPE pretreatment against cobra venom toxicity, the actions of Naja sputatrix venom on spontaneously beating rat atria and aortic rings isolated from both MPE pretreated and untreated rats were studied. Our results showed that the MPE pretreatment conferred protection against cobra venom-induced depression of atrial contractility and atrial rate in the isolated atrial preparations, but it had no effect on the venom-induced contractile response of aortic ring preparation. These observations suggested that the protective effect of MPE pretreatment against cobra venom toxicity involves a direct protective action of MPE on the heart function, in addition to the known immunological neutralization mechanism, and that the protective effect does not involve action on blood vessel contraction. The results also suggest that M. pruriens seed may contain novel cardioprotective agent with potential therapeutic value.

  14. Study of Black Sand Particles from Sand Dunes in Badr, Saudi Arabia Using Electron Microscopy

    Directory of Open Access Journals (Sweden)

    Haider Abbas Khwaja

    2015-08-01

    Full Text Available Particulate air pollution is a health concern. This study determines the microscopic make-up of different varieties of sand particles collected at a sand dune site in Badr, Saudi Arabia in 2012. Three categories of sand were studied: black sand, white sand, and volcanic sand. The study used multiple high resolution electron microscopies to study the morphologies, emission source types, size, and elemental composition of the particles, and to evaluate the presence of surface “coatings or contaminants” deposited or transported by the black sand particles. White sand was comprised of natural coarse particles linked to wind-blown releases from crustal surfaces, weathering of igneous/metamorphic rock sources, and volcanic activities. Black sand particles exhibited different morphologies and microstructures (surface roughness compared with the white sand and volcanic sand. Morphological Scanning Electron Microscopy (SEM and Laser Scanning Microscopy (LSM analyses revealed that the black sand contained fine and ultrafine particles (50 to 500 nm ranges and was strongly magnetic, indicating the mineral magnetite or elemental iron. Aqueous extracts of black sands were acidic (pH = 5.0. Fe, C, O, Ti, Si, V, and S dominated the composition of black sand. Results suggest that carbon and other contaminant fine particles were produced by fossil-fuel combustion and industrial emissions in heavily industrialized areas of Haifa and Yanbu, and transported as cloud condensation nuclei to Douf Mountain. The suite of techniques used in this study has yielded an in-depth characterization of sand particles. Such information will be needed in future environmental, toxicological, epidemiological, and source apportionment studies.

  15. Understanding Colombian Amazonian white sand forests

    NARCIS (Netherlands)

    Peñuela-Mora, M.C.

    2014-01-01

    Although progress has been made in studies on white sand forests in the Amazon, there is still a considerable gap in our knowledge of the unique species composition of white sand forests and their structure and dynamics, especially in Western Amazon. This thesis aims to fill this gap by addressing

  16. Pattern formation - Instabilities in sand ripples

    DEFF Research Database (Denmark)

    Hansen, J. L.; v. Hecke, M.; Haaning, A.

    2001-01-01

    Sand ripples are seen below shallow wavy water and are formed whenever water oscillates over a bed of sand. Here we analyse the instabilities that can upset this perfect patterning when the ripples are subjected to large changes in driving amplitude or frequency, causing them to deform both...

  17. Silica sand resources in the Netherlands

    NARCIS (Netherlands)

    Meulen, M.J. van der; Westerhoff, W.E.; Menkovic, A.; Gruijters, S.H.L.L.; Dubelaar, C.W.; Maljers, D.

    2009-01-01

    Silica sand, (almost) pure quartz sand, is a valuable and scarce mineral resource within the shallow Dutch subsurface. High-grade deposits are exploited in the southeastemmost part of the country, as raw material for the glass, ceramic, chemical and other process industries. Dutch land-use policy

  18. Excerpt of the Interview with Mathew Sands

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 16; Issue 9. Excerpt of the Interview with Mathew Sands. Mathew Sands Finn Aaserud. Face to Face Volume 16 Issue 9 September 2011 pp 881-885. Fulltext. Click here to view fulltext PDF. Permanent link:

  19. Seasonal fluctuations of phlebotomines sand fly populations ...

    African Journals Online (AJOL)

    An entomological survey of phlebotomine sand flies was conducted in the Moulay Yacoub province, central Morocco. An anthropic niche (Ouled Aid) and a wild niche (Zliligh) were selected. Sand flies were collected twice a month between April 2011 and March 2012, using sticky traps and CDC light traps. 3675 specimens ...

  20. Review of Sand Production Prediction Models

    Directory of Open Access Journals (Sweden)

    Hossein Rahmati

    2013-01-01

    Full Text Available Sand production in oil and gas wells can occur if fluid flow exceeds a certain threshold governed by factors such as consistency of the reservoir rock, stress state and the type of completion used around the well. The amount of solids can be less than a few grams per cubic meter of reservoir fluid, posing only minor problems, or a substantial amount over a short period of time, resulting in erosion and in some cases filling and blocking of the wellbore. This paper provides a review of selected approaches and models that have been developed for sanding prediction. Most of these models are based on the continuum assumption, while a few have recently been developed based on discrete element model. Some models are only capable of assessing the conditions that lead to the onset of sanding, while others are capable of making volumetric predictions. Some models use analytical formulae, particularly those for estimating the onset of sanding while others use numerical models, particularly in calculating sanding rate. Although major improvements have been achieved in the past decade, sanding tools are still unable to predict the sand mass and the rate of sanding for all field problems in a reliable form.

  1. Sand transportation and reverse patterns over leeward face of sand dune

    Science.gov (United States)

    Jiang, Hong; Dun, Hongchao; Tong, Ding; Huang, Ning

    2017-04-01

    Sand saltation has complex interactions with turbulent flow and dune form. Most models of wind-blown sand consider ideal circumstances such as steady wind velocity and a flat surface, and the bulk of data on wind flow and sand transport over an individual dune has focused mostly on the influence of dune shape or inter-dune space on the wind flow, neglecting the effect of morphology on sand saltation, particularly airflow and sand transportation over the leeward slope. Wind flow structures over the leeward slope of sand dunes have a fundamental influence on the organization of sand dunes. In order to understand sand dune dynamics, lee face airflow and sediment transportation should be paid more attention. Previous field observations could not measure turbulent flow structure well because of the limited observation points and the influence of experiment structure on wind field. In addition, the reverse sand particles over leeward face could not be collected by sand trap in field. Numerous field observations could not measure turbulent flow structure because of the limited observation points and the influence of experimental structures on the wind field. In addition, the reverse transport of sand particles over leeward face could not be collected by sand traps in field. Therefore, this paper aims to investigate the turbulent flow structure and sand transport pattern over the leeward slope. A numerical model of sand saltation over slope terrain is constructed, which also considers the coupling effects between air flow and sand particles. The large eddy simulation method is used to model turbulent flow. Sand transport is simulated by tracking the trajectory of each sand particle. The results show that terrain significantly alters the turbulent air flow structure and wind-blown sand movement, especially over the leeward slope. Here, mass flux increases initially and then decreases with height in the reversed flow region in the direction of wind flow, and the mass flux

  2. The Effect of Sand on Strength of Mixtures of Bentonite-Sand

    Science.gov (United States)

    Pakbaz, Mohammad C.; Khayat, Navid

    The main purpose of this research is to evaluate the effect of sand on strength of compacted samples of bentonite sand mixtures. Samples of bentonite with 10,30,50,70, and 80 percent by weight of sand at standard proctor optimum water content were compacted and tested to measure confined and unconfined strength. Unconfined strength of mixtures increased with percentage of sand until 50 percent and then it decreased thereafter. On the other hand, the confined strength of mixtures tested in triaxial UU increased with percentage of sand.

  3. Hematite Outlier and Sand Dunes

    Science.gov (United States)

    2003-01-01

    [figure removed for brevity, see original site] Released 4 December 2003This image shows a crater just south of the edge of the famous hematite-bearing surface, which is visible in the context image as a smooth area to the north. The crater has two features of immediate note. The first is a layered mound in the north part of the crater floor. This mound contains hematite, and it is an outlying remnant of the greater deposits to the north that have otherwise completely disappeared in this crater. The second feature is a dune field in the center of the crater floor, with dark dunes indicating winds from the northwest. The dunes grade into a dark sand sheet with no coherent structure, indicating that the sand layer thins out to the south and east.Image information: VIS instrument. Latitude -4.4, Longitude 357.3 East (2.7 West). 19 meter/pixel resolution.Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time.NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  4. Flowability in crushed sand mortar

    Directory of Open Access Journals (Sweden)

    Cabrera, O. A.

    2010-12-01

    Full Text Available The present experimental study explored the relationship between mortar flowability and the voids content in crushed sand to determine the effect of grain shape and surface texture as well as dust content on the behaviour of fresh mortar. The findings revealed a close correlation between voids content and the volume of paste needed for mortar to begin to flow as a continuous material, mortar flowability and the water content needed to attain a given flowability. The comparison of the empirical findings to the results obtained with the Larrard (1, 2 model provided further information on the effect of sand grain morphology on fresh mortars.

    En el presente trabajo se plantea un estudio experimental de la fluidez de morteros basado en el contenido de vacíos de arenas machacadas, para comprender la influencia de la forma y textura superficial de los granos de arena y del contenido de polvo de las mismas sobre el estado fresco de morteros. Los resultados muestran la estrecha relación entre el contenido de vacíos entre granos y los volúmenes de pasta necesarios para iniciar el escurrimiento como un material continuo, la fluidez de los morteros, el contenido de agua para alcanzar una determinada fluidez, etc. El comportamiento evaluado se compara con resultados obtenidos aplicando el modelo de F. de Larrard (1, 2, permitiendo de este modo obtener mayor información de la influencia de la morfología de los granos de la arena sobre el estado fresco de los morteros.

  5. Preserving inland drift sands in the Netherlands

    Science.gov (United States)

    Riksen, M.; Sparrius, L.; Nijssen, M.; Keestra, S.

    2012-04-01

    Inland drift sands in the Netherlands are an important landscape type within the Dutch nature. They represent an important pioneer habitat which has become rare in European nature. Under current climate and environmental conditions (i.e. high N-deposition) these inland drift sands tend to be rapid colonialized by vegetation and therefor lose their aeolian activity. To maintain the area bare sand, managers regularly remove the vegetation. Lack of proper knowledge about the geomorphological processes and even more important on the geomorphological structure of these drift sands, could lead to the loss of characteristic dune structure. In an interdisciplinary research project a new management strategy was developed in which the geomorphological processes and structure form the base for the planning process. To improve the awareness of these aspects among nature managers we developed a management tool "PROMME". Several activities were taken to communicate this with the people involved in the management of drift sands like a brochure and field workshops.

  6. Ecological release in White Sands lizards.

    Science.gov (United States)

    Roches, S Des; Robertson, J M; Harmon, L J; Rosenblum, E B

    2011-12-01

    Ecological opportunity is any change that allows populations to escape selection from competition and predation. After encountering ecological opportunity, populations may experience ecological release: enlarged population size, broadened resource use, and/or increased morphological variation. We identified ecological opportunity and tested for ecological release in three lizard colonists of White Sands, New Mexico (Sceloporus undulatus, Holbrookia maculata, and Aspidoscelis inornata). First, we provide evidence for ecological opportunity by demonstrating reduced species richness and abundance of potential competitors and predators at White Sands relative to nearby dark soils habitats. Second, we characterize ecological release at White Sands by demonstrating density compensation in the three White Sands lizard species and expanded resource use in White Sands S. undulatus. Contrary to predictions from ecological release models, we observed directional trait change but not increased trait variation in S. undulatus. Our results suggest that ecological opportunity and ecological release can be identified in natural populations, especially those that have recently colonized isolated ecosystems.

  7. Choosing an optimum sand control method

    Directory of Open Access Journals (Sweden)

    Ehsan Khamehchi

    2015-06-01

    Full Text Available Formation sand control is always one of the main concerns of production engineers. There are some different methods to prevent sand production. Choosing a method for preventing formation sand production depends on different reservoir parameters and politic and economic conditions. Sometimes, economic and politic conditions are more effective to choose an optimum than reservoir parameters. Often, simultaneous investigation of politic and economic conditions with reservoir parameters has different results with what is expected. So, choosing the best sand control method is the result of thorough study. Global oil price, duration of sand control project and costs of necessary equipment for each method as economic and politic conditions and well productivity index as reservoir parameter are the main parameters studied in this paper.

  8. Ecological release in White Sands lizards

    Science.gov (United States)

    Roches, S Des; Robertson, J M; Harmon, L J; Rosenblum, E B

    2011-01-01

    Ecological opportunity is any change that allows populations to escape selection from competition and predation. After encountering ecological opportunity, populations may experience ecological release: enlarged population size, broadened resource use, and/or increased morphological variation. We identified ecological opportunity and tested for ecological release in three lizard colonists of White Sands, New Mexico (Sceloporus undulatus, Holbrookia maculata, and Aspidoscelis inornata). First, we provide evidence for ecological opportunity by demonstrating reduced species richness and abundance of potential competitors and predators at White Sands relative to nearby dark soils habitats. Second, we characterize ecological release at White Sands by demonstrating density compensation in the three White Sands lizard species and expanded resource use in White Sands S. undulatus. Contrary to predictions from ecological release models, we observed directional trait change but not increased trait variation in S. undulatus. Our results suggest that ecological opportunity and ecological release can be identified in natural populations, especially those that have recently colonized isolated ecosystems. PMID:22393523

  9. Global sand trade is paving the way for a tragedy of the sand commons

    Science.gov (United States)

    Torres, A.; Brandt, J.; Lear, K.; Liu, J.

    2016-12-01

    In the first 40 years of the 21st century, planet Earth is highly likely to experience more urban land expansion than in all of history, an increase in transportation infrastructure by more than a third, and a great variety of land reclamation projects. While scientists are beginning to quantify the deep imprint of human infrastructure on biodiversity at large scales, its off-site impacts and linkages to sand mining and trade have been largely ignored. Sand is the most widely used building material in the world. With an ever-increasing demand for this resource, sand is being extracted at rates that far exceed its replenishment, and is becoming increasingly scarce. This has already led to conflicts around the world and will likely lead to a "tragedy of the sand commons" if sustainable sand mining and trade cannot be achieved. We investigate the environmental and socioeconomic interactions over large distances (telecouplings) of infrastructure development and sand mining and trade across diverse systems through transdisciplinary research and the recently proposed telecoupling framework. Our research is generating a thorough understanding of the telecouplings driven by an increasing demand for sand. In particular, we address three main research questions: 1) Where are the conflicts related to sand mining occurring?; 2) What are the major "sending" and "receiving" systems of sand?; and 3) What are the main components (e.g. causes, effects, agents, etc.) of telecoupled systems involving sand mining and trade? Our results highlight the role of global sand trade as a driver of environmental degradation that threatens the integrity of natural systems and their capacity to deliver key ecosystem services. In addition, infrastructure development and sand mining and trade have important implications for other sustainability challenges such as over-fishing and global warming. This knowledge will help to identify opportunities and tools to better promote a more sustainable use

  10. Scaling laws in sand launch process

    Science.gov (United States)

    Min, Li; Yang, Zhang

    2017-04-01

    As the bond linking the micro research to the macro research in wind-sand flow, the scaling laws on sand mean launch velocity and mean launch angle can be used to calculate the mean velocity and the transport rate, and they also play an important role in understanding saltation. However, universal scaling laws are still absent. In analogy to the fluid flows, the wind-sand flow is divided into three periods based on the way of sand taking off from sand bed, and the hypothesis on the scaling laws in each period is proposed. Then according to the hypothesis we deduce the sand concentration piece-wise function for saltation layer and also the critical shields numbers dividing three periods. The comparisons between the predictions and the experimental observations show that under a lower shields number the vertical mean launch velocity and the mean launch angle scale with the wind shear velocity and the square root of shields number respectively. However, under a higher shields number the vertical mean launch velocity scale with the sand diameter and the mean launch angle is almost constant at 700 or so.

  11. The Influence of Sand Grains Properties on Electrical Properties of Moulding Sand with Inorganic Binder

    Directory of Open Access Journals (Sweden)

    Opyd B.

    2015-09-01

    Full Text Available The paper presents the results of basic research on the influence of the properties of sand grains on electrical properties of water glass moulding sands. It shows electrical properties of the main component – sand grains, crucial to the kinetics of moulding sands heating, such as permittivity εr and loss factor tgδ. Measurements were carried out with the use of the perturbation method for silica, chromite and olivine sands of different mineral, chemical composition and particle size distribution, as well as for moulding sands with water glass grade 145. Analysis of the results of measurements of electrical properties shows that all moulding sands are characterized by a similar permittivity εr and loss factor tgδ. It was found that the electrical properties and the quantity and quality of other components may have a decisive influence on the effectiveness and efficiency of the microwave heating of moulding sands with sand grains. In determining the ability to efficiently absorb the microwave radiation for mixtures which moulding sands are, the impact of all components influencing their individual technological parameters should be taken into account.

  12. Fecal indicators in sand, sand contact, and risk of enteric illness among beachgoers

    Science.gov (United States)

    Heaney, Christopher D.; Sams, Elizabeth; Dufour, Alfred P.; Brenner, Kristen P.; Haugland, Richard A.; Chern, Eunice; Wing, Steve; Marshall, Stephen; Love, David C.; Serre, Marc; Noble, Rachel; Wade, Timothy J.

    2011-01-01

    Background Beach sand can harbor fecal indicator organisms and pathogens, but enteric illness risk associated with sand contact remains unclear. Methods In 2007, visitors at two recreational marine beaches were asked on the day of their visit about sand contact. Ten to 12 days later, participants answered questions about health symptoms since the visit. F+ coliphage, Enterococcus, Bacteroidales, fecal Bacteroides, and Clostridium spp. in wet sand were measured using culture and molecular methods. Results We analyzed 144 wet sand samples and completed 4,999 interviews. Adjusted odds ratios (aORs) were computed, comparing those in the highest tertile of fecal indicator exposure with those who reported no sand contact. Among those digging in sand compared with those not digging in sand, a molecular measure of Enterococcus spp. (calibrator cell equivalents/g) in sand was positively associated with gastrointestinal (GI) illness (aOR = 2.0 [95% confidence interval (CI) = 1.2–3.2]) and diarrhea (2.4 [1.4–4.2]). Among those buried in sand, point estimates were greater for GI illness (3.3 [1.3–7.9]) and diarrhea (4.9 [1.8–13]). Positive associations were also observed for culture-based Enterococcus (colony-forming units/g) with GI illness (aOR digging = 1.7 [1.1–2.7]) and diarrhea (2.1 [1.3–3.4]). Associations were not found among non-swimmers with sand exposure. Conclusions We observed a positive relationship between sand contact activities and enteric illness as a function of concentrations of fecal microbial pollution in beach sand. PMID:22157306

  13. Murzuk Sand Sea, Sahara Desert, Libya, Africa

    Science.gov (United States)

    1993-01-01

    This near vertical view of the Murzuk Sand Sea, Sahara Desert, Libya (22.5N, 13.0E) shows the very diverse landscape that is part of the great Sahara Desert of North Africa. The vast expanse of sand dunes known as the Murzuk sand Sea of Libya and the adjacent rock outcrops support little human habitation. In fact, the tiny village of Murzuk with its center pivot, swing arm irrigated agriculture complex is the only sign of life in the region.

  14. Harry Sands (1917-2007).

    Science.gov (United States)

    Ochroch, Ruth

    2009-01-01

    To everyone who knew and had worked with him, the death of Harry Sands on January 3, 2007, three days before his 90th birthday, resounded as though a mighty oak had fallen. Harry was a giant of a man, both as a human being and as a psychologist. Harry was born January 6, 1917, on the Lower East Side of Manhattan to Russian immigrant parents who ran a laundry. His bachelor's degree in psychology (1941) and his doctoral degree (1952) were both earned at New York University. Harry became a member of the American Psychological Association (APA) in 1943. With his breadth of experience and knowledge, as well as his firm foundation in management and finance, he eventually became a financial advisor to the APA Practice Directorate as well as to the American Psychological Foundation. As the executive director of the Postgraduate Center for Mental Health, Harry made creative strides to improve both the public awareness of the organization as well as its fiscal health. Harry was an active writer and researcher, with a particular interest in epilepsy and various psychoanalytic topics. 2009 APA, all rights reserved

  15. The Effect of a Polyvalent Antivenom on the Serum Venom Antigen Levels of Naja sputatrix (Javan Spitting Cobra) Venom in Experimentally Envenomed Rabbits.

    Science.gov (United States)

    Yap, Michelle Khai Khun; Tan, Nget Hong; Sim, Si Mui; Fung, Shin Yee; Tan, Choo Hock

    2015-10-01

    The treatment protocol of antivenom in snake envenomation remains largely empirical, partly due to the insufficient knowledge of the pharmacokinetics of snake venoms and the effects of antivenoms on the blood venom levels in victims. In this study, we investigated the effect of a polyvalent antivenom on the serum venom antigen levels of Naja sputatrix (Javan spitting cobra) venom in experimentally envenomed rabbits. Intravenous infusion of 4 ml of Neuro Polyvalent Snake Antivenom [NPAV, F(ab')2 ] at 1 hr after envenomation caused a sharp decline of the serum venom antigen levels, followed by transient resurgence an hour later. The venom antigen resurgence was unlikely to be due to the mismatch of pharmacokinetics between the F(ab')2 and venom antigens, as the terminal half-life and volume of distribution of the F(ab')2 in serum were comparable to that of venom antigens (p > 0.05). Infusion of an additional 2 ml of NPAV was able to prevent resurgence of the serum venom antigen level, resulting in a substantial decrease (67.1%) of the total amount of circulating venom antigens over time course of envenomation. Our results showed that the neutralization potency of NPAV determined by neutralization assay in mice may not be an adequate indicator of its capability to modulate venom kinetics in relation to its in vivo efficacy to neutralize venom toxicity. The findings also support the recommendation of giving high initial dose of NPAV in cobra envenomation, with repeated doses as clinically indicated in the presence of rebound antigenemia and symptom recurrence. © 2015 Nordic Association for the Publication of BCPT (former Nordic Pharmacological Society).

  16. Flora ficológica da região sublitorânea rasa de costões rochosos do Núcleo Picinguaba, Parque Estadual da Serra do Mar, Ubatuba, São Paulo Phycological flora from the shallow sublittoral zone of the rocky shores of Serra do Mar State Park, Ubatuba, São Paulo

    Directory of Open Access Journals (Sweden)

    Gisa Eneida Marques Machado

    2011-03-01

    íodo de verão de anos sucessivos, seguindo a mesma metodologia aqui descrita.Greater knowledge of the macroalgae from rocky shores is essential to monitor and manage marine coastal conservation units. Previous surveys of the coastal zone of the Picinguaba unit in the Serra do Mar State Park (PESM, Ubatuba, northern São Paulo state, list macroalgal species from the rocky shores and the mangroves of Fazenda Inlet. The present study aimed to improve the taxonomic survey of seaweeds from the Picinguaba unit and to evaluate the suitability of sampling methodology for rocky shore communities in this conservation unit. Thirteen sampling stations, situated between Almada and Cambury Headlands, were studied in summer 2007; this part of the PESM coastal zone is subject to anthropogenic interference. We carefully searched for macroalgae in different rocky habitats, from the sublittoral fringe towards the sand domain. Aiming to standardize sampling effort at each station, the same specialist searched for macroalgae over a 20 m horizontal extension of the rocky shore, for one hour, by apnea diving. 128 infrageneric taxa were identified (80 Rhodophyta, 22 Ochrophyta and 26 Chlorophyta. Callithamniella flexilis Baardseth, Cryptonemia seminervis (C. Agardh J. Agardh, Cladophora pseudorupestris C. Hoek and Cladophora cf. pygmaea Reinke are new records for the coast of São Paulo state. These species are described and illustrated here. Sixty four species are new occurrences for the rocky shores of PESM. Taking into account other studies, carried out on the northern São Paulo coast and on the southernmost Rio de Janeiro coast, the sampling effort of the present study can be considered suitable for taxonomic surveys, because it produced a comparable number of macroalgal species. In conclusion, for monitoring purposes of the Picinguaba coastal environment, we recommend sampling rocky shore macroalgae yearly, in the summer, using the methodology described in this paper.

  17. Sand Resources, Regional Geology, and Coastal Processes of the Chandeleur Islands Coastal System: an Evaluation of the Breton National Wildlife Refuge

    Science.gov (United States)

    Lavoie, Dawn

    2009-01-01

    Monkey Bayou at the southern end of the Chandeleur Islands. Numerical simulation of waves and sediment transport supports the geophysical results and indicates that vast areas of the lower shoreface are affected and are undergoing erosion during storm events, that there is little or no fair weather mechanism to rework material into the littoral system, and that as a result, there is a net loss of sediment from the system. Lidar surveys revealed that the island chain immediately after Hurricane Katrina lost about 84 percent of its area and about 92 percent of its prestorm volume. Marsh platforms that supported the islands' sand prior to the storm were reduced in width by more than one-half. Repeated lidar surveys document that in places the shoreline has retreated about 100 m under the relatively low-energy waves since Hurricanes Katrina and Rita; however, this retreat is nonuniform. Recent high-resolution geophysical surveys of the sea floor and subsurface within 5-6 km of the Chandeleur Islands during 2006 and 2007 show that, in addition to the sand that is rebuilding portions of the island chain, a large volume of sand is contained in Hewes Point, in an extensive subtidal spit platform that has formed at the northern end of the Chandeleur Islands. Hewes Point appears to be the depositional terminus of the alongshore transport system. In the southern Chandeleurs, sand is being deposited in a broad tabular deposit near Breton Island called the southern offshore sand sheet. These two depocenters account for approximately 70 percent of the estimated sediment volume located in potential borrow sites. An additional large potential source of sand for restoration lies in the St. Bernard Shoals, which are estimated to contain approximately 200 ? 106 m3 of sand. Successful restoration planning for the Breton National Wildlife Refuge should mimic the natural processes of early stages of barrier island evolution including lateral transport to the flanks of the island chain

  18. Sand Lake WMD vegetation mapping project update

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Final report on the vegetation mapping project at Sand Lake Wetland Management District. This project is being completed by the use of SPRING software and ground...

  19. Displacement pile installation effects in sand

    NARCIS (Netherlands)

    Beijer-Lundberg, A.

    2015-01-01

    Installation effects govern the post-installation behaviour of displacement piles in sand. These effects are currently not completely understood. Suitable experimental techniques to model these installation effects include field, laboratory and experimental models. In the current thesis a

  20. Supercritical solvent extraction of oil sand bitumen

    Science.gov (United States)

    Imanbayev, Ye. I.; Ongarbayev, Ye. K.; Tileuberdi, Ye.; Mansurov, Z. A.; Golovko, A. K.; Rudyk, S.

    2017-08-01

    The supercritical solvent extraction of bitumen from oil sand studied with organic solvents. The experiments were performed in autoclave reactor at temperature above 255 °C and pressure 29 atm with stirring for 6 h. The reaction resulted in the formation of coke products with mineral part of oil sands. The remaining products separated into SARA fractions. The properties of the obtained products were studied. The supercritical solvent extraction significantly upgraded extracted natural bitumen.

  1. Laboratory evaluation of selected tar sand asphalts

    Energy Technology Data Exchange (ETDEWEB)

    Button, J.W.; Epps, J.A.; Gallaway, B.M.

    1980-12-01

    Three tar sand asphalts of similar grades prepared from one syncrude by three different refining methods were characterized by tests commonly used to specify paving asphalts together with certain special tests. Asphalt-aggregate mixtures were prepared using these asphalts and tested in the laboratory to determine strength stiffness stability, tensile properties, temperature effects and water susceptibility. Comparison of the tar sand asphalt properties to conventional petroleum asphalt properties reveal no striking differences.

  2. Pragmatics of reclaimed sand quality assessment recovered nowadays from various used sand systems

    Directory of Open Access Journals (Sweden)

    J. Dańko

    2010-04-01

    Full Text Available The assessment of the reclamation degree of used sands is not a simple, clearly defined issue. The great variety of technologies ofmoulding and core sands, based on the organic and inorganic binders does not allow the use of a single, universal index assessing thedegree of reclamation. The article presents the problems of research relating to selection of proper criteria for assessing the degree ofreclamation process of used moulding and core sands deriving from different technologies. The most often applied in practice types ofused sands and the most adequate in practice methods of assessing the degrees of their reclamation were characterized.

  3. Sand Dune Encroachment and Desertification Processes of the Rigboland Sand Sea, Central Iran.

    Science.gov (United States)

    Ahmady-Birgani, Hesam; McQueen, Kenneth G; Moeinaddini, Mazaher; Naseri, Hamidreza

    2017-05-08

    Early studies on sand dune movement and desertification in Iran have not always been convincingly demonstrated because of problems with the field-based measurements. In some areas where various land uses have been engulfed by aeolian sand dunes, desertification is clear, but in other less settled areas, it may not be so obvious. The objective of this study is to demonstrate encroachments of the Rigboland sand sea, central Iran, in its different directions and variable magnitude rates. Determining the rate and direction of the sand sea movements is critical for specifying which lands should be prioritized and quickly protected. The study has trialed a change detection technique which uses a Cross-Tabulation module to compare two available LandsatTM images over the Rigboland sand sea. This indicates that within a ten-year span (from 1988 to 1998) more than 200 ha/yr were added to the Rigboland sand sea, from the alluvial fan landforms in the eastern upstream, outer margins of the Rigboland sand sea. Coupled with GIS techniques, this type of analysis of the remote sensing (RS) images provides an effective tool for the monitoring and prognostication of sand dune movement and sand sea change.

  4. Layers, Landslides, and Sand Dunes

    Science.gov (United States)

    2003-01-01

    [figure removed for brevity, see original site] Released 27 October 2003This image shows the northern rim of one of the Valles Marineris canyons. Careful inspection shows many interesting features here. Note that the spurs and gullies in the canyon wall disappear some distance below the top of the canyon wall, indicating the presence of some smooth material here that weathers differently from the underlying rocks. On the floor of the canyon, there are remains from a landslide that came hurtling down the canyon wall between two spurs. Riding over the topography of the canyon floor are many large sand dunes, migrating generally from the lower right to upper left.Image information: VIS instrument. Latitude -14.1, Longitude 306.7 East (53.3 West). 19 meter/pixel resolution.Note: this THEMIS visual image has not been radiometrically nor geometrically calibrated for this preliminary release. An empirical correction has been performed to remove instrumental effects. A linear shift has been applied in the cross-track and down-track direction to approximate spacecraft and planetary motion. Fully calibrated and geometrically projected images will be released through the Planetary Data System in accordance with Project policies at a later time. NASA's Jet Propulsion Laboratory manages the 2001 Mars Odyssey mission for NASA's Office of Space Science, Washington, D.C. The Thermal Emission Imaging System (THEMIS) was developed by Arizona State University, Tempe, in collaboration with Raytheon Santa Barbara Remote Sensing. The THEMIS investigation is led by Dr. Philip Christensen at Arizona State University. Lockheed Martin Astronautics, Denver, is the prime contractor for the Odyssey project, and developed and built the orbiter. Mission operations are conducted jointly from Lockheed Martin and from JPL, a division of the California Institute of Technology in Pasadena.

  5. Contribution of laser altimetry images to the geomorphology of the Late Holocene inland drift sands of the European Sand Belt

    NARCIS (Netherlands)

    Jungerius, P.D.; Riksen, M.J.P.M.

    2010-01-01

    The paper explores the possibilities of applying the analysis of laser altimetry images to Dutch drift sands. All along the European Sand Belt, which stretches from Great Britain to the Ural Mountains, Late Glacial cover sands, river dunes and other ice-age deposits were reactivated as drift sand

  6. Contribution of laser altimetry images to the geomorphology of the Late Holocene inland drift sands of the European Sand Belt

    NARCIS (Netherlands)

    Jungerius, P.D.; Riksen, M.J.P.M.

    2010-01-01

    The paper explores the possibilities of applying the analysis of laser altimetry images to Dutch drift sands. All along the European Sand Belt, which stretches from Great Britain to the Ural Mountains, Late Glacial cover sands, river dunes and other ice–age deposits were reactivated as drift sand

  7. Origins of late- Pleistocene coastal dune sheets, Magdalena and Guerrero Negro, from continental shelf low-stand supply (70-20 ka), under conditions of southeast littoral- and eolian-sand transport, in Baja California Sur, Mexico

    Science.gov (United States)

    Peterson, Curt D.; Murillo-Jiménez, Janette M.; Stock, Errol; Price, David M.; Hostetler, Steve W.; Percy, David

    2017-10-01

    Shallow morpho-stratigraphic sections (n = 11) in each of two large coastal dune sheets including the Magdalena (7000 km2) and Guerrero Negro (8000 km2) dune sheets, from the Pacific Ocean side of Baja California Sur, Mexico, have been analyzed for dune deposit age. The shallow morpho-stratigraphic sections (∼2-10 m depth) include 11 new TL and 14C ages, and paleosol chronosequences, that differentiate cemented late Pleistocene dune deposits (20.7 ± 2.1 to 99.8 ± 9.4 ka) from uncemented Holocene dune deposits (0.7 ± 0.05 to at least 3.2 ± 0.3 ka). Large linear dune ridges (5-10 m in height) in the dune sheet interiors trend southeast and are generally of late Pleistocene age (∼70-20 ka). The late Pleistocene dune deposits reflect eolian transport of marine sand across the emerged continental shelf (30-50 km southeast distance) from low-stand paleo-shorelines (-100 ± 25 m elevation), which were locally oriented nearly orthogonal to modeled deep-water wave directions (∼300° TN). During the Holocene marine transgression, onshore and alongshore wave transport delivered remobilized shelf-sand deposits to the nearshore areas of the large dune sheets, building extensive barrier islands and sand spits. Submerged back-barrier lagoons generally precluded marine sand supply to dune sheet interiors in middle to late Holocene time, though exceptions occur along some ocean and lagoon shorelines. Reactivation of the late Pleistocene dune deposits in the dune sheet interiors lead to generally thin (1-3 m thickness), but widespread, covers of Holocene dune deposits (0.41 ± 0.05 to 10.5 ± 1.6 ka). Mechanical drilling will be required to penetrate indurated subsoil caliche layers to reach basal Pleistocene dune deposits.

  8. Nuclear energy in the oils sands

    Energy Technology Data Exchange (ETDEWEB)

    Arsenault, J.E.

    2014-09-15

    The major Canadian oil sands are located in Alberta and Saskatchewan, with most production from the strata along the Athabasca River in Alberta. The economically recoverable oil sands reserves are estimated to be 168 billion barrels which at a current production rate of 1.8 million barrels per day (2012), are projected to last a very long time. Canada has been blessed with vast energy resources which make it potentially energy-independent and able to provide significant exports but there are concerns that their development cannot be managed in a wholly acceptable manner. Comparable concerns have been applied to nuclear energy in the past and in recent times to the oil sands. The technologies associated with these energy sources have always been controversial because they are at the confluence of economics and politics where finding a balance between risk and reward is difficult. So it should be no surprise that when these technologies get linked together in certain proposals their prospect for success is doubly difficult. The possible use of nuclear energy for production of oil from the oil sands dates back to the late 1950s, when an experiment to mine the oil by detonating an underground nuclear device was proposed. It was predicted that the heat and pressure released from such a device would create a large cavern into which oil would flow, and from where it would be pumped to the surface. Almost at the same time, oil sands research using conventional sources of energy had culminated with the development of practical refining processes, essentially those still in use today. These methods require large amounts of heat energy in the form of hot water and steam. In this century nuclear energy was proposed as the source for the heat required by the oil sands production processes. To date neither of these nuclear proposals for oil sands projects have been successful, because the economic and political balance could not be struck. (author)

  9. An evaluation of aeolian sand transport models using four different sand traps at the Hors, Texel

    NARCIS (Netherlands)

    Hijma, M.P.; Lodder, Quirijn J.

    2001-01-01

    This report shows the result of an evaluation of how 12 aeolian sand transport models perform on a beach in Northwest-Europe. Their predictions are compared to measured rates of sand transport using four different traps. The efficiency of the different types of traps was also evaluated. From this it

  10. Simulating and understanding sand wave variation: A case study of the Golden Gate sand waves

    Science.gov (United States)

    Sterlini, F.; Hulscher, S.J.M.H.; Hanes, D.M.

    2009-01-01

    In this paper we present a detailed comparison between measured features of the Golden Gate sand wave field and the results of a nonlinear sand wave model. Because the Golden Gate sand waves exhibit large variation in their characteristics and in their environmental physics, this area gives us the opportunity to study sand wave variation between locations, within one well-measured, large area. The nonlinear model used in this paper is presently the only tool that provides information on the nonlinear evolution of large-amplitude sand waves. The model is used to increase our understanding of the coupling between the variability in environmental conditions and the sand wave characteristics. Results show that the model is able to describe the variation in the Golden Gate sand waves well when both the local oscillating tidal current and the residual current are taken into account. Current and water depth seem to be the most important factors influencing sand wave characteristics. The simulation results give further confidence in the underlying model hypothesis and assumptions. Copyright 2009 by the American Geophysical Union.

  11. MORPHOMETRIC CHARACTERIZATION OF THE SAND FRACTION IN A SAND GRAIN IMAGE CAPTURE SYSTEM1

    Directory of Open Access Journals (Sweden)

    Lucimar Arruda Viana

    Full Text Available ABSTRACT Morphology studies assume significant importance in analysis of phenomena of granular systems packaging, in particular with a view to the use of the technique of soil stabilization named particle size correction in forest roads. In this context, this study aimed to develop and operationalize a Sand Grain Image Capture System and, hereby, determine the morphological indices of the sand fractions of two sandy soils called João Pinheiro (JP and Cachoeira da Prata (CP. Soil samples, air-dried, were sieved (2.0 mm nominal mesh size for removal of gravels. The materials that passed through the sieve were subjected to dispersion, washing in 0.053 mm nominal mesh size sieve, removal of organic matter and iron oxides to obtain the clean sand fractions. Subsequently, each soil sample was sieved for separation into twelve classes, between the diameters of 0.149 mm and 1.190 mm, using a Rotap shaker. Next, tests were carried out to characterize the morphometric attributes of the twelve classes of sand fractions of the soils studied. For validation of the performance of the Sand Grain Image Capture System, the results were compared to those obtained using a standard procedure for image analysis. The analysis of the results led to the following conclusions: (i the sand fraction of the JP soil presented higher values for the morphometric indices roundness, elongation and compactness compared to sand fraction of the CP soil; and (ii the Sand Grain Image Capture System worked properly, with practicality.

  12. Elution of Mixed Moulding Sands with the GEOPOL Binder and Core Sands with the Phenolic Resin

    Directory of Open Access Journals (Sweden)

    Holtzer M.

    2013-12-01

    Full Text Available Out of moulding and core sands used in the foundry industry, sands with organic binders deserve a special attention. These binders are based on synthetic resins, which ensure obtaining the proper technological properties and sound castings, however, they negatively influence the environment. Depending on the kind of the applied resin under an influence of a temperature such compounds as for example BTEX group and polycyclic aromatic hydrocarbons (PAHs can be formed and released. During storing or economic utilization of used sand is possibility of eluting harmful substances into the environment. Therefore at assessing an influence of the used sand on the environment two above elements should be taken into consideration. Only such investigations provide the complete assessment of the given sand harmfulness.

  13. Fracturing in the oil-sands reservoirs

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Y.; Yang, B. [Society of Petroleum Engineers (Canada); Xu, B. [BitCan G and E Inc (Canada)

    2011-07-01

    Oil sands reservoirs stimulation requires the use of steam or solvent in order to reduce oil viscosity, making for better recovery. Injection of these stimulants is generally achieved by hydro-fracturing and, given concerns over the impact of this on caprock integrity, a better understanding is needed of the phenomena involved during fracturing. Based on a review of the literature and on analytical, numerical and field data, this paper aims to explore the phenomena involved during hydro-fracturing of oil sands. Review of existing test data shows that oil sands have a clear dilatation tendency. Analytical derivation then compares the effects and occurrence of dilatation and tensile parting during hydro-fracturing, showing a dominance of dilatation, resulting in much higher porosity in the sands formation. Field data then confirmed these derivations, thus giving them an experimental validation. Glaciation is proposed as a cause for the presence of these phenomena in oil sands, thus the results can safely be extrapolated to other similar rock formations.

  14. Planet-wide sand motion on mars

    Science.gov (United States)

    Bridges, N.T.; Bourke, M.C.; Geissler, P.E.; Banks, M.E.; Colon, C.; Diniega, S.; Golombek, M.P.; Hansen, C.J.; Mattson, S.; McEwen, A.S.; Mellon, M.T.; Stantzos, N.; Thomson, B.J.

    2012-01-01

    Prior to Mars Reconnaissance Orbiter data, images of Mars showed no direct evidence for dune and ripple motion. This was consistent with climate models and lander measurements indicating that winds of sufficient intensity to mobilize sand were rare in the low-density atmosphere. We show that many sand ripples and dunes across Mars exhibit movement of as much as a few meters per year, demonstrating that Martian sand migrates under current conditions in diverse areas of the planet. Most motion is probably driven by wind gusts that are not resolved in global circulation models. A past climate with a thicker atmosphere is only required to move large ripples that contain coarse grains. ?? 2012 Geological Society of America.

  15. Thermoluminescent dosimetric properties of Descalvado sand

    Energy Technology Data Exchange (ETDEWEB)

    Teixeira, M.I.; Caldas, L.V.E

    2006-07-01

    Sand samples proceeding from Descalvado, Sao Paulo, were studied with regard to their dosimetric properties using the thermoluminescence technique (TL) for high doses. These sand samples present steady physical and chemical characteristics to the end items, and they are used in the glass industry and for casting. The TL curves of the samples were obtained after an irradiation at the Gamma-Cell system ({sup 60} Co), of IPEN. The glow curves present two peaks at 80 C and 220 C approximately. Calibration curves were obtained for doses between 50 Gy and 5 kGy. The results indicate that the sand samples can be used for high-doses dosimetry in several areas of applications of ionizing radiation. (Author)

  16. On the Size Distribution of Sand

    DEFF Research Database (Denmark)

    Sørensen, Michael

    2016-01-01

    by Bagnold and confirmed in numerous empirical studies. The model implies that the size distribution of a sand deposit is a logarithmic normal-inverse Gaussian (NIG) distribution, which is one of the generalized hyperbolic distributions. The model modifies a previous model, which implied a log-normal size-distribution......, variance and skewness of the log-size distribution to the physical parameters of the model. The results might be useful when comparing empirical size-distributions from different deposits. It is argued that size-distributions with the same general shape as the NIG-distributions can be obtained also when......A model is presented of the development of the size distribution of sand while it is transported from a source to a deposit. The model provides a possible explanation of the log-hyperbolic shape that is frequently found in unimodal grain size distributions in natural sand deposits, as pointed out...

  17. Permeability Tests on Silkeborg Sand No. 0000

    DEFF Research Database (Denmark)

    Lund, Willy; Jakobsen, Kim Parsberg

    The flow through porous media plays an important role in various engineering disciplines, as for example in ground water hydrology and soil mechanics. In the present study the permeability is determined for a fine, saturated sand. As the flow through a porous media strongly depends on the charact......The flow through porous media plays an important role in various engineering disciplines, as for example in ground water hydrology and soil mechanics. In the present study the permeability is determined for a fine, saturated sand. As the flow through a porous media strongly depends...... on the characteristics of the soil matrix, the permeability is determined for different void ratios. All tests are performed on reconstituted specimens of Silkeborg Sand No. 0000. The permeability is determined by use of a falling head apparatus. The apparatus, test procedures and the analysis method are described...

  18. Permeability Tests on Eastern Scheldt Sand

    DEFF Research Database (Denmark)

    Jakobsen, Kim Parsberg

    The flow through porous media plays an important role in various engineering disciplines, as for example in ground water hydrology and soil mechanics. In the present study the permeability is determined for a fine, saturated sand. As the flow through a porous media strongly depends on the charact......The flow through porous media plays an important role in various engineering disciplines, as for example in ground water hydrology and soil mechanics. In the present study the permeability is determined for a fine, saturated sand. As the flow through a porous media strongly depends...... on the characteristics of the soil matrix, the permeability is determined for different void ratios. All tests are performed on reconstituted specimens of Eastern Scheldt Sand. The permeability is determined by use of a falling head apparatus. Finally the test results are briefly summarised and a relationship between...

  19. Development tendencies of moulding and core sands

    Directory of Open Access Journals (Sweden)

    Stanislaw M. Dobosz1

    2011-11-01

    Full Text Available Further development of the technology for making moulding and core sands will be strictly limited by tough requirements due to protection of the natural environment. These tendencies are becoming more and more tense, so that we will reach a point when even processes, that from technological point of view fulfill high requirements of the foundry industry, must be replaced by more ecologically-friendly solutions. Hence, technologies using synthetic resins as binding materials will be limited. This paper presents some predictable development tendencies of moulding and core sands. The increasing role of inorganic substances will be noticed, including silicate binders with significantly improved properties, such as improved knock-out property or higher reclamation strength. Other interesting solutions might also be moulding sands bonded by geo-polymers and phosphate binders or salts and also binders based on degradable biopolymers. These tendencies and the usefulness of these binders are put forward in this paper.

  20. Sand transport, erosion and granular electrification

    DEFF Research Database (Denmark)

    Merrison, J.P.

    2012-01-01

    The transport of granular materials by wind has a major impact on our environment through sand/soil erosion and the generation and transport of atmospheric dust aerosols. Terrestrially the transport of dust involves billions of tons of material every year, influencing the global climate...... can affect grain transport through the generation of intense electric fields and processes of electrostatic assembly. Importantly the transport of sand is characterized by saltation, which is known to be an active process for erosion and therefore a source for dust and sand formation. Using novel...... erosion simulation techniques the link between grain transport rates and erosion rates has been quantified. Furthermore this can be linked to production rates for dust and has been associated with chemical and mineral alteration through a process of mechanical activation of fractured surfaces. This work...

  1. Bioaugmentation of flow-through sand filters

    DEFF Research Database (Denmark)

    Samuelsen, Elin Djurhuus

    MCPA degradation for prolonged periods in flow-through sand columns. In an expression study of catabolic genes with putative roles in phenoxy acid degradation, we observed a marked upregulation of catabolic genes cadA and tfdC upon exposure to MCPA, 2,4-D, dichlorprop and mecoprop in strain PM2, which...... coincided with efficient mineralisation/degradation, and proposed the tfdC gene as a suitable marker for monitoring phenoxy acid degradation in strain PM2. Furthermore, when testing strain PM2s degradation performance in flow-through sand columns, we found that strain PM2 was able to sustain induced...... for degradation performances in flow-through sand columns, with the aim of identifying a suitable inoculant strain for future environmental applications. Another aim was to identify a suitable genetic marker to monitor phenoxy acid degradation in strain Sphingobium sp. PM2. We were not able to link motility...

  2. A Threshold Continuum for Aeolian Sand Transport

    Science.gov (United States)

    Swann, C.; Ewing, R. C.; Sherman, D. J.

    2015-12-01

    The threshold of motion for aeolian sand transport marks the initial entrainment of sand particles by the force of the wind. This is typically defined and modeled as a singular wind speed for a given grain size and is based on field and laboratory experimental data. However, the definition of threshold varies significantly between these empirical models, largely because the definition is based on visual-observations of initial grain movement. For example, in his seminal experiments, Bagnold defined threshold of motion when he observed that 100% of the bed was in motion. Others have used 50% and lesser values. Differences in threshold models, in turn, result is large errors in predicting the fluxes associated with sand and dust transport. Here we use a wind tunnel and novel sediment trap to capture the fractions of sand in creep, reptation and saltation at Earth and Mars pressures and show that the threshold of motion for aeolian sand transport is best defined as a continuum in which grains progress through stages defined by the proportion of grains in creep and saltation. We propose the use of scale dependent thresholds modeled by distinct probability distribution functions that differentiate the threshold based on micro to macro scale applications. For example, a geologic timescale application corresponds to a threshold when 100% of the bed in motion whereas a sub-second application corresponds to a threshold when a single particle is set in motion. We provide quantitative measurements (number and mode of particle movement) corresponding to visual observations, percent of bed in motion and degrees of transport intermittency for Earth and Mars. Understanding transport as a continuum provides a basis for revaluating sand transport thresholds on Earth, Mars and Titan.

  3. Sand control systems used in completing wells

    Directory of Open Access Journals (Sweden)

    Gabriel Wittenberger

    2005-12-01

    Full Text Available Expandable Tubular Technology is transforming the face of well completion and construction. This technology provides: a substantially higher hydrocarbon production rates from the reservoir, a reduced well drilling and construction costs, new possibilities for previously unreachable or uneconomic reservoirs, and step a change towards the single diameter well. ESS (Expandable Sand Screen has an unrivalled performance worldwide for delivering a reliable sand control in a wide range of applications. Well costs typically cut by over 20 %, and the productivity increases up to 70 %.

  4. Undrained Cyclic Behaviour of Dense Frederikshavn Sand

    DEFF Research Database (Denmark)

    Nielsen, Søren Kjær; Ibsen, Lars Bo; Sørensen, Kris Wessel

    2013-01-01

    A modified contour diagram is created for the Frederikshavn Sand in the undrained case for a relative density of ID = 80 %. It can be used to estimate the number of cycles to failure for a given combination of pore pressure, average and cyclic load ratio. The diagram is based on a series of undra......A modified contour diagram is created for the Frederikshavn Sand in the undrained case for a relative density of ID = 80 %. It can be used to estimate the number of cycles to failure for a given combination of pore pressure, average and cyclic load ratio. The diagram is based on a series...

  5. Sand dunes - a study of the different dune formations in the Namib Sand Sea, Namibia

    Science.gov (United States)

    Sangunji, Antonio

    2017-04-01

    Sand dunes - a study of the different dune formations in the Namib Sand Sea, Namibia By: Antonio Sangunji, Academia Secondary School, Windhoek, Namibia The Namib Sand Sea has spectacular dunes, some of which are 5700 years old. Large, complex, linear dune in the northern part of the Namib Sand Sea provide new information on the age and internal sedimentary structures of these dunes, with important implications for interpretations of paleoclimates and the rock record of eolian sandstones. Academia Secondary School learners study several science subjects including Life and Physical sciences. As part of their Science course, they study the environment and landforms. To better understand the dune dynamics, several grade 8 pupils, 35 learners in total were taken to the field to demonstrate the formation of dunes. One of the highest points in the Namib Sand Sea - Dune 7 which is 388 meters was visited. Learners made models of the dunes in the classroom with different types of modeling clay, such as oil-based, polymer, dough and pottery clay. The learners also carried out hands-on exercises on the link between different types of sand, wind speed, size and altitude of the dunes. Field trips are a great opportunity for learners to learn how sand dunes are formed and show how simple experiments can be used to demonstrate dune formation.

  6. Pelican Spit 1988-1997

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Densities of nekton were measured in three created salt marshes to examine habitat development rate. All three marshes were created from dredged material from the...

  7. Operating sand and environment: can harmonising?

    Directory of Open Access Journals (Sweden)

    Eriton Geraldo Vieira

    2015-12-01

    Full Text Available Mining is considered one of the basic sectors of Brazil's economy. The mining activity provides basic raw material for industry, and several products from the simplest to the most complex have mineral origin. Most products mined in Brazil, by volume, are sand and crushed stone. The sand extraction activities are of great importance for social development, but equally responsible for negative environmental impacts, sometimes irreversible. Due to the location’s rigidity, the sand miner is forced to mine where there is mineral occurrence, which constantly is near the bottom of valleys and rivers, often coinciding with the riparian forests, which are considered to be permanently protected areas (APP. In this context, objective is to demonstrate through a dialectical approach, procedurally developed through literature the possibility of conciliating the exploration of ore sand in permanently protected areas. Thus, will be analyzed the rules established in the Law 12.651/12 (New forest law, as well as will be demonstrated the socioeconomic and environmental impacts of mining activities which have to be observed to achieve the environmental function of property. The research was supported by the qualitative method and its construction we used the technique of bibliographical and documentary review.

  8. A Triaxial Characteristic State Model for Sand

    DEFF Research Database (Denmark)

    Krenk, S.; Borup, M.; Hedegaard, J.

    A non-associated plasticity model for sand is presented. The loading surface is a closed two-parameter surface in the principal stress space, determined by a size and a shape parameter. The shape parameter is determined explicitly from the slope of the characteristic line. For small mean stress...

  9. Our Footprints on the Sands of Time

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 11; Issue 1. Our Footprints on the Sands of Time. Partha P Majumder D Balasubramanian. General Article Volume 11 Issue 1 January 2006 pp 32-50. Fulltext. Click here to view fulltext PDF. Permanent link:

  10. experimental investigation of sand minimum transport velocity

    African Journals Online (AJOL)

    user

    The production of reservoir fluid through long tiebacks/pipelines has emerged as one of the cost effective alternative especially for many marginal fields which can now be produced as clusters into a common processing facility. However, sand is often co-produced with the reservoir fluid especially when produced from ...

  11. Fatal toxoplasmosis in sand cats (Felis margarita).

    Science.gov (United States)

    Pas, An; Dubey, J P

    2008-09-01

    The sand cat (Felis margarita) is a small-sized felid occurring in the United Arab Emirates (UAE). The sand cat captive-breeding program at the Breeding Centre for Endangered Arabian Wildlife in Sharjah, UAE, has until recently been severely compromised by very high newborn mortality rates. Two different pairs of sand cats gave birth, respectively, to one and two litters (with a total of eight kittens) between 1999 and 2006. Seven out of eight kittens died between the third and 21st wk of life. Toxoplasmosis was confirmed as the cause of death in these two litters. Adult cats had high antibody titers to Toxoplasma gondii before pregnancy, suggesting that maternal immunity did not protect the kittens against infection with T. gondii and that maternal immunity might not have prevented transplacental transmission of the parasite. This observation contrasts with what is seen in domestic cats. To date, this is the first report on confirmed fatal toxoplasmosis and prevalence of T. gondii in sand cats.

  12. V-2 Rocket at White Sands

    Science.gov (United States)

    1946-01-01

    A V-2 rocket takes flight at White Sands, New Mexico, in 1946. The German engineers and scientists who developed the V-2 came to the United States at the end of World War II and continued rocket testing under the direction of the U. S. Army, launching more than sixty V-2s.

  13. Soil and humus development in drift sands

    NARCIS (Netherlands)

    Sevink, J.; de Waal, R.W.; Fanta, J.; Siepel, H.

    2010-01-01

    In drift sand, incipient mineral soils with a very thin endorganic horizon develop towards highly acid soils with a thick, differentiated, mor to moder type ectorganic horizon and incipient podzolisation, within a period of about 100 years. This is due slow litter decomposition and associated soil

  14. Undrained Triaxial Tests on Eastern Scheldt Sand

    DEFF Research Database (Denmark)

    Jakobsen, Kim Parsberg

    of frictional materials during monotonic loading. The tests conducted includes undrained and constant volume tests, starting from different initial states of stress and following various stress paths. All the tests are performed on reconstituted loose to medium dense specimens of Eastern Scheldt Sand....

  15. Dark grains of sand: a geological storytelling

    Science.gov (United States)

    Gallo Maresca, Magda

    2017-04-01

    In the secondary Italian school the Earth science learning begins at first year, in synergy with other natural science subjects such as Astronomy, Chemistry and Biology. Italian teachers have to focus on the landscape geomorphological aspects and often Earth processes are difficult to display since they are related to certain phenomena happened during the past and often far from the involved country. In order to better understand the environment surrounding us, very simple and poor materials, like sands, allow the teachers to create attractive lab experiences. According to the IBSE (Inquiry Based Science Education) approach, a learning unit has been implemented starting from a walking along the light carbonate beaches of the Adriatic sea: a smart look to the sands ("engage step"), stroke the students fantasy pushing them to explore some strange black grains on the sands. Dirty sands? Or rock landscape, soil degradation and Ofanto river and coastal processes (erosion, transportation and deposition)? This was the teaching challenge. Due to the youngest age, a third level, guided inquiry, was adopted so the teacher is the "guide of inquiry" encouraging the students using the research question ("Why is the sand dark?", "Do all sands look the same?", "Where does it come from?") and driving the students around their investigation plans ("How can I measure grain size?"). A procedure to answer the above questions and validate the results and explanations has been implemented to allow the students to be proactive in their study. During the learning activities will be the students to ask for field trip to elaborate their new knowledge, verify and visualize the speculated processes. The teaching skills allow to address several geosciences domains such as mineralogy, petrology, regional geology and geodynamics as well as other scientific disciplines such as mathematics (more specifically statistics), forensic science and even life sciences (the presence of bioclasts might

  16. Characteristics of SCC with Fly Ash and Manufactured Sand

    Science.gov (United States)

    Praveen Kumar, K.; Radhakrishna

    2016-09-01

    Self compacting concrete (SCC) of M40 grade was designed. The binder in SCC consists of OPC and fly ash in the ratio of 65:35. River sand was replaced by manufactured sand (M-sand) at replacement levels of 20,40,60,80 and 100%. An attempt was made to evaluate the workability and strength characteristics of self compacting concrete with river sand and manufactured sand as fine aggregates. For each replacement level, constant workability was maintained by varying the dosage of superplasticizer. T50 flow time, V Funnel time, V-funnel T5 time as well as compressive, split tensile and flexural strength of SCC were found at each replacement level of M-sand. They were compared to SCC with river sand. Results indicate favourable use of M-sand in preparation of Self Compacting Concrete.

  17. Triaxial and Torsional Shear Test Results for Sand

    Science.gov (United States)

    1994-06-01

    Hettler & Vardoulais Compression Behavior of dry sand (1994)__ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Vaid & Chem (1985) Cyclic...1, 2 and 3, ELE Internationa Limited, 1985. Hettler , A. W., and Vardoulakis, I., "Behavior of Dry Sand Tested in a Larger Triaxial Apparatus

  18. Fiber-reinforced sand strength and dilation characteristics

    Directory of Open Access Journals (Sweden)

    Hesham M. Eldesouky

    2016-06-01

    Full Text Available Randomly distributed fiber reinforcement is used to provide an isotropic increase in the sand shear strength. The previous studies were not consistent regarding the fibers effect on the volumetric change behavior of fiber-reinforced sand. In this paper, direct shear tests are conducted on 108 specimens to investigate the effects of the fibers content, relative density, normal stress and moisture content on the shear strength and volumetric change behaviors of fiber-reinforced sand. The study investigates also the possibility of using dry fiber-reinforced sand as an alternative to heavily compacted unreinforced moist sand. The results indicate that the fibers inclusion increases the shear strength and dilation of sand. Moisture suppresses the fibers effect on the peak and post-peak shear strengths, and dilation. Dry loose fiber-reinforced sand achieves the same shear strength of heavily compacted unreinforced moist sand, yet at more than double the horizontal displacement.

  19. Mineral resource of the month: industrial sand and gravel

    Science.gov (United States)

    Dolley, Thomas

    2007-01-01

    With many diverse uses, industrial sand and gravel, also known as silica sand, is one of the most important nonmetallic minerals in the world. Industrial sand and gravel is a mining industry term used for sands that have a very high percentage of silicon dioxide, or greater than 95 percent quartz. Deposits of industrial sand and gravel can be found virtually everywhere on Earth, but are less widespread than deposits of common construction sand and gravel. Industrial sand and gravel is distinctive in grain size, hardness, inertness and resistance to high temperature and chemical action. Beverage containers, fiberglass insulation, fiber-optic cables and light bulbs are just some of today’s many products produced from industrial sand and gravel.

  20. Oil sands fever : the environmental implications of Canada's oil sands rush

    Energy Technology Data Exchange (ETDEWEB)

    Woynillowicz, D.; Severson-Baker, C.; Raynolds, M.

    2005-11-01

    This report puts forward recommendations to improve the environmental management of oil sands while calling for an accelerated transition towards sustainable energy in Canada. It presents a historical discussion and background of Canada's oil sands rush and discusses making oil from tar, fuel consumption by oil sand operations, and transportation to refineries. Climate change consequences such as escalating greenhouse gas emissions, emissions intensity, the Kyoto commitment and taking meaningful action are identified along with the cumulative environmental impacts on water, land and air. The paper addressed the issue of managing these cumulative impacts and protecting the environment. Government assistance and subsidies were discussed with reference to Alberta's favourable royalty regime and federal tax breaks. Last, the report discussed stewardship and leadership for responsible oil sand use, climate protection, regional environment protection and establishment of an equitable fiscal regime. 266 refs., 7 tabs., 34 figs.

  1. Incipient Motion of Sand and Oil Agglomerates

    Science.gov (United States)

    Nelson, T. R.; Dalyander, S.; Jenkins, R. L., III; Penko, A.; Long, J.; Frank, D. P.; Braithwaite, E. F., III; Calantoni, J.

    2016-12-01

    Weathered oil mixed with sediment in the surf zone in the northern Gulf of Mexico after the 2010 Deepwater Horizon oil spill, forming large mats of sand and oil. Wave action fragmented the mats into sand and oil agglomerates (SOAs) with diameters of about 1 to 10 cm. These SOAs were transported by waves and currents along the Gulf Coast, and have been observed on beaches for years following the spill. SOAs are composed of 70%-95% sand by mass, with an approximate density of 2107 kg/m³. To measure the incipient motion of SOAs, experiments using artificial SOAs were conducted in the Small-Oscillatory Flow Tunnel at the U.S. Naval Research Laboratory under a range of hydrodynamic forcing. Spherical and ellipsoidal SOAs ranging in size from 0.5 to 10 cm were deployed on a fixed flat bed, a fixed rippled bed, and a movable sand bed. In the case of the movable sand bed, SOAs were placed both proud and partially buried. Motion was tracked with high-definition video and with inertial measurement units embedded in some of the SOAs. Shear stress and horizontal pressure gradients, estimated from velocity measurements made with a Nortek Vectrino Profiler, were compared with observed mobility to assess formulations for incipient motion. For SOAs smaller than 1 cm in diameter, incipient motion of spherical and ellipsoidal SOAs was consistent with predicted critical stress values. The measured shear stress at incipient motion of larger, spherical SOAs was lower than predicted, indicating an increased dependence on the horizontal pressure gradient. In contrast, the measured shear stress required to move ellipsoidal SOAs was higher than predicted, even compared to values modified for larger particles in mixed-grain riverine environments. The laboratory observations will be used to improve the prediction of incipient motion, transport, and seafloor interaction of SOAs.

  2. Geochemical evidence for a Cretaceous oil sand (Bima oil sand) in the Chad Basin, Nigeria

    Science.gov (United States)

    Bata, Timothy; Parnell, John; Samaila, Nuhu K.; Abubakar, M. B.; Maigari, A. S.

    2015-11-01

    Paleogeographic studies have shown that Earth was covered with more water during the Cretaceous than it is today, as the global sea level was significantly higher. The Cretaceous witnessed one of the greatest marine transgressions in Earth's history, represented by widespread deposition of sands directly on underlying basement. These sand bodies hold much of the world's heavy oil. Here, we present for the first time, geochemical evidence of a Cretaceous oil sand (Bima oil sand) in the Chad Basin, Nigeria. Bima oil sand is similar to other Cretaceous oil sands, predominantly occurring at shallow depths on basin flanks and generally lacking a seal cover, making the oil susceptible to biodegradation. The bulk properties and distribution of molecular features in oils from the Bima oil sand suggest that they are biodegraded. Sterane maturity parameters and the trisnorhopane thermal indicator for the oils suggest thermal maturities consistent with oils generated as conventional light oils, which later degraded into heavy oils. These oils also show no evidence of 25-norhopane, strongly suggesting that biodegradation occurred at shallow depths, consistent with the shallow depth of occurrence of the Bima Formation at the study locality. Low diasterane/sterane ratios and C29H/C30H ratios greater than 1 suggest a carbonate source rock for the studied oil. The Sterane distribution further suggests that the oils were sourced from marine carbonate rocks. The C32 homohopane isomerization ratios for the Bima oil sand are 0.59-0.60, implying that the source rock has surpassed the main oil generation phase, consistent with burial depths of the Fika and Gongila Formations, which are both possible petroleum source rocks in the basin.

  3. Advanced testing and characterization of transportation soils and bituminous sands

    CSIR Research Space (South Africa)

    Anochie-Boateng, Joseph

    2007-12-01

    Full Text Available Modulus with Hydrostatic Stress for Oil Sands at 30oC. .......... 79 FIGURE 4.7 Bulk Modulus Model 3 Performances for Oil Sand Samples at 20oC................... 82 FIGURE 4.8 Bulk Modulus Model 3 Performances for Oil Sand Samples at 30o... of Resilient Modulus with Applied Deviator Stress at Two Test Temperatures for AU-14 Sample............................................................................................. 140 FIGURE 6.15 Performances of the SE-09 Oil sand Sample Resilient...

  4. Research on the evaporation of gasoline on beach sand

    Energy Technology Data Exchange (ETDEWEB)

    Berqueiro, J.R.; Dominguez, F.; Pons, J.M

    Gasoline evaporation is an importent factor in spill behavour. When a gasoline spill occurs on beach sand, part of the gasoline is spread over the sand surface while the rest is being absorbed. The spread and absorption rate depend on, amoung other things, the permeability of the sand which in turn also depends on it's water content. It is important to study the effects of gasoline evaporation on sand beaches in order to determine when risk of explosion is low, so that cleaning of the polluted beach surface can be carried out without danger. The effects of the evaporation of 90 and 97 octane (normal and super) gasoline on beach sand have been studied using the tray evaporation technique as described in the literature. The size of the sand particles have been included along with temperature and air speed as variables in the evaporation process. The effects of gasoline on the retention capacity of three distinct types of sand particles, as well as the effects of water in the sand, have been studied for normal and super gasolines. The following conclusions can be drawn: sand retention capacity is inversely proportional to sand particle size; when sand is moistened, its gasoline retention capacity increases proportionally with the decreasing particle size; with the same sand fractions and air speed conditions; the evaporation rate increases with increasing air speeds; with the same sand fractions and air speed conditions the evaporation rate increases with temperature; given the same temperature and air conditions, a gasoline spill on coarse sand evaporates faster than one on medium sand; and given the same temperatures and air speed conditions, the evaporation rate of normal gasoline spreading over any of the three types of sand is always higher than super gasoline due to the higher volatility of the 90 octane gasoline. 10 refs., 1 fig., 3 tabs.

  5. Morphological records of storm floods exemplified by the impact of the 1872 Baltic storm on a sandy spit system in south-eastern Denmark

    DEFF Research Database (Denmark)

    Clemmensen, Lars B; Bendixen, Mette; Hede, Mikkel Ulfeldt

    2014-01-01

    the frequency of extreme storm flood events in the area over a longer time perspective. This paper combines field studies of morphology and sedimentary deposits, studies of historical maps, digital terrain model, ground-penetrating radar profiles, and luminescence dating. Sea water reached 2.8 m above mean sea...... aeolian sand was trapped by existing vegetation. The studied beach-ridge system records about 4500 years of accumulation; the storm flood sediments described are unique suggesting that the 1872 Baltic storm flood event was an extreme event. Thus studies of beach-ridge systems form a new source...

  6. Evaluation of an Intergrated / Biocoagulant-sand filter Drum for ...

    African Journals Online (AJOL)

    User

    2015-03-18

    Mar 18, 2015 ... pilot scale up was carried out using 120 L (120,000 ml) of water from Mezam River pretreated with 2400 g of powdered M. oleifera seeds for 15 min retention time and filtered through a sand filter drum made of fine sand, coarse sand, charcoal and gravel for 1 h filtration time. The total mean values of ...

  7. Dewatering Behaviour of Fine Oil Sands Tailings : An Experimental Study

    NARCIS (Netherlands)

    Yao, Y.

    2016-01-01

    Oil sands tailings are a warm aqueous suspension of sand, silt, clay, residual bitumen and naphtha. The tailings are hydraulically transported and stored in tailing ponds where they segregate, with the sand settling from suspension forming beaches and the remaining tailings flowing to the middle of

  8. Permanent deformation behavior of naturally occurring bituminous sands

    CSIR Research Space (South Africa)

    Anochie-Boateng, Joseph

    2008-01-01

    Full Text Available Oil sand, or tar sand, is a generic name given to bituminous sand deposits that are rich in bitumen or asphalt content to the extent that oil can be extracted from these deposits. The typical 8% to 15% presence of bitumen in the soil composition...

  9. Design and Fabrication of a Foundry Sand Mixer Using Locally ...

    African Journals Online (AJOL)

    Most small foundry shops mix their sand manually which is not efficient since homogenous mix cannot be guaranteed and even when foundry mixer are available most of them are imported costing the nation huge foriegn exchange. A foundry sand mixer capable of mixing foundry sand has been designed and fabricated ...

  10. Dredging Processes I : The Cutting of Sand, Clay & Rock - Theory

    NARCIS (Netherlands)

    Miedema, S.A.

    2013-01-01

    This book gives an overview of cutting theories. It starts with a generic model, which is valid for all types of soil (sand, clay and rock) after which the specifics of dry sand, water saturated sand, clay, rock and hyperbaric rock are covered. For each soil type small blade angles and large blade

  11. Interactions between microbial activity and distribution and mineral coatings on sand grains from rapid sand filters treating groundwater

    DEFF Research Database (Denmark)

    Gülay, Arda; Tatari, Karolina; Musovic, Sanin

    Rapid sand filtration is a traditional and widespread technology for drinking water purification which combines biological, chemical and physical processes together. Granular media, especially sand, is a common filter material that allows several oxidized compounds to accumulate on its surface...

  12. Sand Needs and Resources Offshore New York

    Science.gov (United States)

    Lashley, J. M.; Flood, R. D.; White, M.; Bokuniewicz, H.; Hinrichs, C.; Wilson, R. E.

    2016-02-01

    "Superstorm" Sandy (October, 2012) accentuated the persistent problem of coastal erosion on New York's ocean coast. The New York state Department of State in cooperation with the Bureau of Ocean Energy Management has initiated further identification and assessment of marine sand reserves required to improve the resiliency of coastal communities and the maintenance of coastal habitats. The historical demand for beach nourishment has been about 1.5 million cubic meters per year, but sea level rise and the occurrence of extreme conditions may increase the demand to over 5 million cubic meters annually. Forty-four historical and proposed borrow sites have been delineated. This inner shelf is both sand rich and data rich. Geophysical and geological data has been compiled and reassessed to support identification, characterization, and delineation of sand resources for potential use in future coastal restoration, beach nourishment, and/or wetland restoration efforts. The South Shore of Long Island is composed in part by the Fire Island National Seashore. Holocene sand ridges extending at an oblique angle to the cross shore in the seaward direction. Borrow pits among the sand ridges, excavated were apparent in the most recent surveys and it appears that natural replenishment of offshore borrow areas has been occurring although the rates need to be determined in order to assess their sustainability. Not only is the area one of intense societal attention, but the use of this resource for coastal resilience must fit into a diverse framework marine spatial planning including not only traditional components, like commercial fishing, but also new factors like the siting of offshore wind-farms. To extend this assessment will include a recent survey, sponsored by the Bureau of Ocean Energy Management and the New York Department of State, providing approximately 700 km of geophysical survey lines located between 3 and 9 nautical miles offshore, and 46 geotechnical samples

  13. Radiographic parameters for diagnosing sand colic in horses

    Directory of Open Access Journals (Sweden)

    Egenvall Agneta

    2008-06-01

    Full Text Available Abstract Background Ingestion of sand can cause colic, diarrhoea and weight loss in horses, but these signs are unspecific and can have many other causes. The amount of sand that induces disease may vary between individuals. To avoid over-diagnosing, it is important to determine the amount of sand that can be found in horses without clinical signs of gastrointestinal disease. The aim of this study was to use previously suggested parameters for establishing a radiographic diagnosis of sand colic, and compare these findings between a sand colic group and a control group. Methods Abdominal radiographs were obtained in 30 horses with a complaint unrelated to the gastrointestinal tract. In addition, archived abdominal radiographs of 37 clinical cases diagnosed with sand impaction were investigated. The size of the mineral opacity indicative of sand in the abdomen was measured and graded according to a previously published protocol based on height and length. Location, homogeneity, opacity and number of sand accumulations were also recorded. Results Twenty out of 30 control horses (66% had one or more sand accumulations. In the present study; height, length and homogeneity of the accumulations were useful parameters for establishing a diagnosis of sand colic. Radiographically defined intestinal sand accumulation grades of up to 2 was a common finding in horses with no clinical signs from the gastrointestinal tract whereas most of the clinical cases had much larger grades, indicating larger sand accumulations. Conclusion Further work to establish a reliable grading system for intestinal sand content is warranted, but a previously proposed grading system based on measurements of height and length may be an alternative for easy assessment of sand accumulations in the meantime. The present study indicates that a grade 1 – 2 sand accumulation in the intestine is a frequent finding in horses. When working up a case with clinical signs from the

  14. Porosity and packing of Holocene river, dune, and beach sands

    Energy Technology Data Exchange (ETDEWEB)

    Atkins, J.E. (Conoco, Inc., Oklahoma City, OK (United States)); McBride, E.F. (Univ. of Texas, Austin (United States))

    1991-03-01

    The porosity and packing of 174 samples of well-sorted surficial and shallowly buried (to 17 m), unconsolidated Holocene sands were determined by point counting the upper surface of thin sections of epoxy-impregnated samples in reflected light. Average depositional porosity for 124 surficial beach sands, river point-bar and braid-bar sands, and eolian dune sands is between 40% and 58%. Beach sands exhibit an average packing value (contact index = CI) of 0.79, river sands an average IC of 0.91, and eolian dune sands an average CI of 1.02. Packing gets tighter with depth, but the authors found no decrease in porosity with depth for river and beach sands buried to 17 m. Thus, packing is more sensitive to small changes in fabric than is porosity. Beach sands typically contain 5.5% oversized pores (OSP), river sands 3.8% OSP, and eolian dune sands 4.0% OSP. Most OSP are packing defects rather than dissolution pores, although trapped air bubbles are common in some beach sands. OSP decrease linearly with depth to 17 m, our deepest sample. Extrapolation of our data indicates that they will be destroyed at a depth less than 100 m. Significant differences in porosity, oversized-pore, and packing values exist between most point-bar and braid-bar deposits and between two heavily sampled point bars, but no significant differences in these values exist when braid-bar sands are compared to other braid-bar sands. Sands form different beaches have significant differences in porosity, oversized pores, and packing. The average porosity is 46% for eolian ripple strata, 50% for grain-fall strata, and 51% for grain-flow strata. Ripple strata are tighter packed than grain-fall and grain-flow strata.

  15. Post-liquefaction reconsolidation of sand.

    Science.gov (United States)

    Adamidis, O; Madabhushi, G S P

    2016-02-01

    Loosely packed sand that is saturated with water can liquefy during an earthquake, potentially causing significant damage. Once the shaking is over, the excess pore water pressures that developed during the earthquake gradually dissipate, while the surface of the soil settles, in a process called post-liquefaction reconsolidation. When examining reconsolidation, the soil is typically divided in liquefied and solidified parts, which are modelled separately. The aim of this paper is to show that this fragmentation is not necessary. By assuming that the hydraulic conductivity and the one-dimensional stiffness of liquefied sand have real, positive values, the equation of consolidation can be numerically solved throughout a reconsolidating layer. Predictions made in this manner show good agreement with geotechnical centrifuge experiments. It is shown that the variation of one-dimensional stiffness with effective stress and void ratio is the most crucial parameter in accurately capturing reconsolidation.

  16. Longshore sediment transport at Golden Sands (Bulgaria

    Directory of Open Access Journals (Sweden)

    Hristo Nikolov

    2006-09-01

    Full Text Available The paper presents the results of studies on the qualitative and quantitative features of the littoral drift at Golden Sands (Bulgaria, carried out jointly by Polish and Bulgarian researchers. The mathematical modelling of physical coastal processes took wave transformation (wave diffraction and refraction; the effects of shoaling and wave breaking and longshore sediment transport into account. The computations were carried out for the mean statistical annual wave climate, determined on the basis of IO BAS wave data, simulated using the WAM method from long-term Black Sea wind data. The results of sediment transport computations clearly show that its direction off the Golden Sands shore is from north to south.

  17. Drained Triaxial Tests on Eastern Scheldt Sand

    DEFF Research Database (Denmark)

    Praastrup, U.; Jakobsen, Kim Parsberg

    In the process of understanding and developing models for geomaterials, the stress-strain behaviour is commonly studied by performing triaxial tests. In the present study static triaxial tests have been performed to gain knowledge of the stress-strain behaviour of frictional materials during mono...... monotonic loading. The tests reported herein are all drained tests, starting from different initial states of stress and following various stress paths. AIl the tests are performed on reconstituted medium dense specimens of Eastern Scheldt Sand....

  18. Response to Oil Sands Products Assessment

    Science.gov (United States)

    2015-09-01

    indoors or leave the area to limit their exposure to toxic fumes. Specific information about the diluent added to an oil sands mixture of concern would...known as upgraders. These refineries essentially strip much of the carbon from the bitumen and produce a light synthetic crude oil (known as Syncrude...Minnesota’s new law, states: (Douglass, 2014) “ Essentially , there’s no meaningful regulation or requirements or standards for oil spill response for

  19. Solvent extraction of Southern US tar sands

    Energy Technology Data Exchange (ETDEWEB)

    Penney, W.R.

    1990-01-01

    The Department of Chemical Engineering at the University of Arkansas, in association with Diversified Petroleum Recovery, Inc. (DPR) of Little Rock, Arkansas, has been developing a solvent extraction process for the recovery of bitumen from tar sands for the past five years. The unique feature of the process is that the bitumen is recovered from the solvent by contacting with a co-solvent, which causes the bitumen to precipitate. The overall purpose of this project is to study both the technical and economic feasibility of applying this technology for recovery of bitumen from tar sands by (1) investigating the socioeconmic factors which affect (a) plant siting and (b) the market value of recovered bitumen; (2) operating a process demonstration unit at the rate of 1 lb/hr recovered bitumen while producing clean sand and recyclable solvents; and (3) determine the economic conditions which will make a bitumen recovery project economical. DPR has analyzed the historical trends of domestic production, consumption, discoveries and reserves of crude oil. They have started an investigation of the volatility in the price of crude oil and of gasoline prices and of the differential between gasoline and crude oil. DPR continues to analyze the geographical movement and demand for asphalt products. Utah does not appear economically attractive as a site for a bitumen from tar sands asphalt plant. Oklahoma sites are now being studied. This report also contains the quarterly progress report from a University of Nevada study to determine bitumen composition, oxygen uptake rates, and viscosities of Alabama and Utah bitumens. Both reports have been indexed separately for inclusion on the data base.

  20. Energetic instability unjams sand and suspension.

    Science.gov (United States)

    Jiang, Yimin; Liu, Mario

    2004-10-01

    Jamming is a phenomenon occurring in systems as diverse as traffic, colloidal suspensions, and granular materials. A theory on the reversible elastic deformation of jammed states is presented. First, an explicit granular stress-strain relation is derived that captures many relevant features of sand, including especially the Coulomb yield surface and a third-order jamming transition. Then this approach is generalized, and employed to consider jammed magnetorheological and electrorheological fluids, again producing results that compare well to experiments and simulations.

  1. Mineralogy of Eolian Sands at Gale Crater

    Science.gov (United States)

    Achilles, C. N.; Vaniman, D. T.; Blake, D. F.; Bristow, T. F.; Rampe, E. B.; Ming, D. W.; Chipera, S. J.; Morris, R. V.; Morrison, S. M.; Downs, R. T.; hide

    2016-01-01

    The Mars Science Laboratory rover Curiosity has been exploring outcrop and regolith in Gale crater since August 6, 2012. During this exploration, the mission has collected 10 samples for mineralogical analysis by X-ray diffraction (XRD), using the CheMin instrument. The CheMin (Chemistry and Mineralogy) instrument on the Mars Science Laboratory rover Curiosity uses a CCD detector and a Co-anode tube source to acquire both mineralogy (from the pat-tern of Co diffraction) and chemical information (from energies of fluoresced X-rays). A detailed description of CheMin is provided in [1]. As part of the rover checkout after landing, the first sample selected for analysis was an eolian sand deposit (the Rocknest "sand shadow"). This sample was selected in part to characterize unconsolidated eolian regolith, but primarily to prove performance of the scoop collection system on the rover. The focus of the mission after Rocknest was on the consolidated sediments of Gale crater, so all of the nine subsequent samples were collected by drilling into bedrock com-posed of lithified sedimentary materials, including mudstone and sandstone. No scoop samples have been collected since Rocknest, but at the time this abstract was written the mission stands poised to use the scoop again, to collect active dune sands from the Bagnold dune field. Several abstracts at this conference outline the Bagnold dune campaign and summarize preliminary results from analyses on approach to the Namib dune sampling site. In this abstract we review the mineralogy of Rocknest, contrast that with the mineralogy of local sediments, and anticipate what will be learned by XRD analysis of Bagnold dune sands.

  2. Cyclic Triaxial Loading of Cohesionless Silty Sand

    DEFF Research Database (Denmark)

    Sabaliauskas, Tomas; Ibsen, Lars Bo

    2015-01-01

    To engineer efficient structures offshore, we need to extend our knowledge of soil response. Cyclic loading and high water pressure encountered offshore greatly influence cohesionless soil performance. Silty sand from Frederikshavn wind turbine farm was tested using single diameter height samples...... with lubricated, smooth boundary piston heads in a Danish triaxial apparatus. Samples were successfully subjected to loading histories of high complexity. Loading include high strains and stresses, post liquefaction response, transitioning through multiple densities and restoring initial soil properties after...

  3. Sorption of Arsenite onto Mackinawite Coated Sand

    Science.gov (United States)

    Gallegos, T. J.; Hayes, K. F.; Abriola, L. M.

    2004-05-01

    Arsenic contamination of groundwater is a widespread problem affecting aquifers in the United States as well as abroad. Recent strengthening of the US EPA MCL for arsenic has prompted the need for technology capable of removing both arsenite and arsenate from solution. Arsenite, the more toxic form of arsenic, is more difficult to remove from anoxic zones in the subsurface. Studies by others have demonstrated the affinity of some types of iron sulfides for arsenite, such as troilite, pyrite, amorphous iron sulfide and mackinawite. However, these studies have not provided a comprehensive investigation of the macroscopic behavior of arsenite in the presence of crystalline mackinawite in a form that can be readily applied to real-world treatment technologies. This study examines the behavior of arsenite in the presence of mackinawite coated sand. PH edge results demonstrate that arsenite sorption onto mackinawite coated sand increases with increasing pH, reaching maximum removal at pH 10. Arsenite removal, albeit slight, occurring below pH 5 is independent of pH indicative of a different removal mechanism. Isotherm studies show that at low concentrations, removal is Langmuirian in nature. Arsenite sorption abruptly converts to linear behavior at high concentrations, possibly attributed to the saturation of the monolayer. Ionic strength effects were assessed by comparing pH edge data developed for three different concentrations of NaCl background electrolyte solution. Increases in ionic strength enhance the removal of arsenite from solution, suggesting possible inner-sphere surface complexation removal mechanisms. Information gathered in this study can be used to further develop surface complexation models to describe and predict reactivity of arsenite in the presence of mackinawite coated sands in anoxic regions. Mackinawite coated sands investigated here may provide a feasible reactive medium for implementation in above-ground sorption reactors or subsurface

  4. Fusion of arkosic sand by intrusive andesite

    Science.gov (United States)

    Bailey, Roy A.

    1954-01-01

    An andesite dike in the Valles Mountains of northern New Mexico has intruded and partly fused arkosic sediments for a distance of 50 feet from its contacts. The dike is semi-circular in form, has a maximum width of about 100 feet, and is about 500 feet long. Small associated arcuate dikes are arranged in spiral fashion around the main dike, suggesting that they were intruded along shear fractures similar to those described by Burbank (1941). The fused rocks surrounding the andesite dike are of three general types: 1) partly fused arkosic sand, 2) fused clay, and 3) hybrid rocks. The fused arkosic sand consists of relict detrital grains of quartz, orthoclose, and plagioclase, imbedded in colorless glass containing microlites of tridymite, cordierite, and magnetite. The relict quartz grains are corroded and embayed by glass; the orthoclase is sanidinized and partly fused; and the plagioclase is inverted to the high temperature form and is partly fused. The fused clay, which was originally a mixture of montmorillonite and hydromica, consists primarily of cordierite but also contains needle-like crystals of sillimanite (?) or mullite (?). The hybrid rocks originated in part by intermixing of fused arkosic sediments and andesitic liquid and in part by diffusion of mafic constituents through the fused sediments. They are rich in cordierite and magnetite and also contain hypersthene, augite, and plagioclase. The composition of pigeonite in the andesite indicates that the temperature of the andesite at the time of intrusion probably did not exceed 1200?C. Samples of arkosic sand were fused in the presence of water in a Morey bomb at 1050?C. Stability relations of certain minerals in the fused sand suggest that fusion may have taken place at a lower temperature, however, and the fluxing action of volatiles from the andesite are thought to have made this possible.

  5. Guide to preparing SAND reports. Revised

    Energy Technology Data Exchange (ETDEWEB)

    Locke, T.K. [ed.

    1996-04-01

    This guide contains basic information needed to produce a SAND report. Its guidelines reflect DOE regulation and Sandia policy. The guide includes basic writing instructions in an annotated sample report; guidance for organization, format, and layout of reports produced by line organizations; and information about conference papers, journal articles, and brochures. The appendixes contain sections on Sandia`s preferred usage, equations, references, copyrights and permissions, and publishing terms.

  6. Pullout capacity of batter pile in sand

    Directory of Open Access Journals (Sweden)

    Ashraf Nazir

    2013-03-01

    Full Text Available Many offshore structures are subjected to overturning moments due to wind load, wave pressure, and ship impacts. Also most of retaining walls are subjected to horizontal forces and bending moments, these forces are due to earth pressure. For foundations in such structures, usually a combination of vertical and batter piles is used. Little information is available in the literature about estimating the capacity of piles under uplift. In cases where these supporting piles are not vertical, the behavior under axial pullout is not well established. In order to delineate the significant variables affecting the ultimate uplift shaft resistance of batter pile in dry sand, a testing program comprising 62 pullout tests was conducted. The tests are conducted on model steel pile installed in loose, medium, and dense sand to an embedded depth ratio, L/d, vary from 7.5 to 30 and with various batter angles of 0°, 10°, 20°, and 30°. Results indicate that the pullout capacity of a batter pile constructed in dense and/or medium density sand increases with the increase of batter angle attains maximum value and then decreases, the maximum value of Pα occurs at batter angle approximately equal to 20°, and it is about 21–31% more than the vertical pile capacity, while the pullout capacity for batter pile that constructed in loose sand decreases with the increase of pile inclination. The results also indicated that the circular pile is more resistant to pullout forces than the square and rectangular pile shape. The rough model piles tested is experienced 18–75% increase in capacity compared with the smooth model piles. The suggested relations for the pullout capacity of batter pile regarding the vertical pile capacity are well predicted.

  7. Pullout capacity of batter pile in sand

    Science.gov (United States)

    Nazir, Ashraf; Nasr, Ahmed

    2012-01-01

    Many offshore structures are subjected to overturning moments due to wind load, wave pressure, and ship impacts. Also most of retaining walls are subjected to horizontal forces and bending moments, these forces are due to earth pressure. For foundations in such structures, usually a combination of vertical and batter piles is used. Little information is available in the literature about estimating the capacity of piles under uplift. In cases where these supporting piles are not vertical, the behavior under axial pullout is not well established. In order to delineate the significant variables affecting the ultimate uplift shaft resistance of batter pile in dry sand, a testing program comprising 62 pullout tests was conducted. The tests are conducted on model steel pile installed in loose, medium, and dense sand to an embedded depth ratio, L/d, vary from 7.5 to 30 and with various batter angles of 0°, 10°, 20°, and 30°. Results indicate that the pullout capacity of a batter pile constructed in dense and/or medium density sand increases with the increase of batter angle attains maximum value and then decreases, the maximum value of Pα occurs at batter angle approximately equal to 20°, and it is about 21–31% more than the vertical pile capacity, while the pullout capacity for batter pile that constructed in loose sand decreases with the increase of pile inclination. The results also indicated that the circular pile is more resistant to pullout forces than the square and rectangular pile shape. The rough model piles tested is experienced 18–75% increase in capacity compared with the smooth model piles. The suggested relations for the pullout capacity of batter pile regarding the vertical pile capacity are well predicted. PMID:25685412

  8. Study of the anti-sand sucker rod pump

    Science.gov (United States)

    Wei, Hangxin; Lv, Bingxin; Xi, Wenkui; Yi, Peng

    2017-06-01

    In order to solve the problem of sand stuck in the sucker rod pump, an anti-sand sucker rod pump is designed. The anti-sand sucker rod pump includes the conventional sucker rod pump and the swirl flow device. The sand particles can be separated from the oil in the swirl flow device, so the plunger of the sucker rod pump cannot be stuck. The motion equation of the sand particles in oil is deduced. The virtual model of the swirl flow device is built in GAMBIT software. And simulation of solid-liquid two phase flow is simulated in software FLUENT. The simulation results show that the swirl flow device can realize the sand particles separation from the oil completely. So the pump can have the effect of anti-sands.

  9. Optics At White Sands Missile Range

    Science.gov (United States)

    Fronczek, Ron C.; Hayslett, Charles R.

    1985-11-01

    We present an overview of the optics and optical data gathering programs conducted at White Sands Missile Range. Activities at White Sands Missile Range have always been diverse - the first test conducted there was the world's first nuclear explosion. In the forty years since that event the range has hosted a large assortment of vehicles including V2, Nike, Aerobee, Space Shuttle, Cruise, and the Copperhead. The last three of these devices illustrate the difficulty of the White Sands optical data gathering task. One is acquired in orbit, one as it crosses through a mountain pass, and one as it issues from the muzzle of a cannon. A combination of optical, radar, video, computer, and communications technology has produced a versatile system that can satisfy the data gathering requirements of most range users. Another example of the diverse optics programs at the range is the development of the High Energy Laser Systems Test Facility (HELSTF). Because of the nature of the systems being tested, the HELSTF is full of optics and optical systems including the TRW MIRACL laser and the Hughes SEA LITE Beam Director.

  10. New production techniques for alberta oil sands.

    Science.gov (United States)

    Carrigy, M A

    1986-12-19

    Low world oil prices represent a serious threat to expanded commercial development of the Canadian oil sands in the near term, as they do to all of the higher cost alternatives to crude oil such as oil shales and coal liquefaction. Nonetheless, research and field testing of new technology for production of oil from oil sands are being pursued by industry and government in Alberta. New production technology is being developed in Canada to produce synthetic oil from the vast resources of bitumen trapped in the oil sands and bituminous carbonates of northern Alberta. This technology includes improved methods of mining, extraction, and upgrading of bitumen from near-surface deposits as well as new drilling and production techniques for thermal production of bitumen from the more deeply buried reservoirs. Of particular interest are the cluster drilling methods designed to reduce surface disturbance and the techniques for horizontal drilling of wells from underground tunnels to increase the contact of injection fluids with the reservoir.

  11. Transport of colloidal silica in unsaturated sand: Effect of charging properties of sand and silica particles.

    Science.gov (United States)

    Fujita, Yosuke; Kobayashi, Motoyoshi

    2016-07-01

    We have studied the transport of colloidal silica in various degrees of a water-saturated Toyoura sand column, because silica particles are widely used as catalyst carriers and abrasive agents, and their toxicity is reported recently. Since water-silica, water-sand, and air-water interfaces have pH-dependent negative charges, the magnitude of surface charge was controlled by changing the solution pH. The results show that, at high pH conditions (pH 7.4), the deposition of colloidal silica to the sand surface is interrupted and the silica concentration at the column outlet immediately reaches the input concentration in saturated conditions. In addition, the relative concentration of silica at the column outlet only slightly decreases to 0.9 with decreasing degrees of water saturation to 38%, because silica particles are trapped in straining regions in the soil pore and air-water interface. On the other hand, at pH 5 conditions (low pH), where sand and colloid have less charge, reduced repulsive forces result in colloidal silica attaching onto the sand in saturated conditions. The deposition amount of silica particles remarkably increases with decreasing degrees of water saturation to 37%, which is explained by more particles being retained in the sand column associated with the air-water interface. In conclusion, at higher pH, the mobility of silica particles is high, and the air-water interface is inactive for the deposition of silica. On the other hand, at low pH, the deposition amount increases with decreasing water saturation, and the particle transport is inhibited. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Properties of dune sand concrete containing coffee waste

    Directory of Open Access Journals (Sweden)

    Mohamed Guendouz

    2018-01-01

    Full Text Available In the last years, an increase of coffee beverages consumption has been observed all over the world; and its consumption increases the waste coffee grounds which will become an environmental problems. Recycling of this waste to produce new materials like sand concrete appears as one of the best solutions for reduces the problem of pollution. This work aims to study the possibility of recycling waste coffee grounds (Spent Coffee Grounds (SCG as a fine aggregate by replacing the sand in the manufacturing of dune sand concrete. For this; sand concrete mixes were prepared with substitution of sand with the spent coffee grounds waste at different percentage (0%, 5%, 10%, 15% and 20% by volume of the sand in order to study the influence of this wastes on physical (Workability, bulk density and porosity, mechanical (compressive and flexural strength and Thermal (Thermal conductivity and thermal diffusivity properties of dune sand concrete. The results showed that the use of spent coffee grounds waste as partial replacement of natural sand contributes to reduce workability, bulk density and mechanical strength of sand concrete mixes with an increase on its porosity. However, the thermal characteristics are improved and especially for a level of 15% and 20% of substitution. So, it is possible to obtain an insulating material which can be used in the various types of structural components. This study ensures that reusing of waste coffee grounds in dune sand concrete gives a positive approach to reduce the cost of materials and solve some environmental problems.

  13. Numerical simulation of flow and compression of green sand

    DEFF Research Database (Denmark)

    Hovad, Emil

    with the flow of the sand particles and the deposition of sand dur-ing the production of sand molds using the sand shot in the DISAMATIC process. The deposition of the green sand in the chamber was investigated with a special cavity design where air vents were placed inside the cavities. The air vents are used...... to transport the green sand with an airflow during the sand shot. By changing the air vents settings in the chamber and in the cavities it was possible to improve the filling in the narrow passages in the cavity design, thereby improving the final sand mold as well. The sand shot with the cavity design...... was simulated by the discrete element method (DEM) modelling the flow of the green sand combined with classical computational fluid dynamics (CFD) for modelling the airflow in the chamber and the airflow through the air vents. These experiments and simulations gave beneficial insights to the DISAMATIC process...

  14. Policy Analysis of the Canadian Oil Sands Experience

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2013-09-01

    For those who support U.S. oil sands development, the Canadian oil sands industry is often identified as a model the U.S. might emulate, yielding financial and energy security benefits. For opponents of domestic oil sands development, the Canadian oil sands experience illustrates the risks that opponents of development believe should deter domestic policymakers from incenting U.S. oil sands development. This report does not seek to evaluate the particular underpinnings of either side of this policy argument, but rather attempts to delve into the question of whether the Canadian experience has relevance as a foundational model for U.S. oil sands development. More specifically, this report seeks to assess whether and how the Canadian oil sands experience might be predictive or instructive in the context of fashioning a framework for a U.S. oil sands industry. In evaluating the implications of these underpinnings for a prospective U.S. oil sands industry, this report concentrates on prospective development of the oil sands deposits found in Utah.

  15. Mars Rover Curiosity Traverses of Sand Ripples

    Science.gov (United States)

    Stein, N.; Arvidson, R. E.; Zhou, F.; Heverly, M.; Maimone, M.; Hartman, F.; Bellutta, P.; Iagnemma, K.; Senatore, C.

    2014-12-01

    Martian sand ripples present a challenge for rover mobility, with drives over ripples often characterized by high wheel sinkage and slippage that can lead to incipient embedding. Since landing in Gale Crater, Curiosity has traversed multiple sand ripples, including the transverse aeolian ridge (TAR) straddling Dingo Gap on sols 533 and 535. On sol 672, Curiosity crossed backward over a series of sand ripples before ending its drive after high motor currents initiated visual odometry (VO) processing, which detected 77% slip, well in excess of the imposed 60% slip limit. At the end of the drive, the right front wheel was deeply embedded at the base of a ripple flank with >20 cm sinkage and the rear wheels were near a ripple crest. As Curiosity continues its approach to Mount Sharp it will have to cross multiple ripples, and thus it is important to understand Curiosity's performance on sol 672 and over similar ripples. To this end the sol 672 drive was simulated in ARTEMIS (Adams-Based Rover Terramechanics Interaction Simulator), a software tool consisting of realistic rover mechanical models, a wheel-terrain interaction module for deformable and non-deformable surfaces, and realistic terrain models. ARTEMIS results, Dumont Dunes tests performed in the Mojave Desert using the Scarecrow test rover, and single wheel tests performed at MIT indicate that the high slip encountered on sol 672 likely occurred due to a combination of rover attack angle, ripple geometry, and soil properties. When ripple wavelength approaches vehicle length, the rover can reach orientations in which the leading wheels carry minimal normal loads and the trailing wheels sink deeply, resulting in high slippage and insufficient thrust to propel the rover over ripples. Even on relatively benign (i.e. low tilt) terrains, local morphology can impose high sinkage, thus impeding rover motion. Work is underway to quantify Curiosity's drive performance over various ripple geometries to retrieve soil

  16. Influence of silicate on the transport of bacteria in quartz sand and iron mineral-coated sand.

    Science.gov (United States)

    Dong, Zhe; Yang, Haiyan; Wu, Dan; Ni, Jinren; Kim, Hyunjung; Tong, Meiping

    2014-11-01

    The influence of silicate on the transport and deposition of bacteria (Escherichia coli) in packed porous media were examined at a constant 20 mM ionic strength with different silicate concentrations (from 0 to 1 mM) at pH 7. Transport experiments were performed in two types of representative porous media, both bare quartz sand and iron mineral-coated quartz sand. In bare quartz sand, the breakthrough plateaus in the presence of silicate in suspensions were lower and the corresponding retained profiles were higher than those without silicate ions, indicating that the presence of silicate in suspensions decreased cell transport in bare quartz sand. Moreover, the decrease of bacteria transport in quartz sand induced by silicate was more pronounced with increasing silicate concentrations from 0 to 1 mM. However, when EPS was removed from cell surfaces, the presence of silicate in cell suspensions (with different concentrations) did not affect the transport behavior of bacteria in quartz sand. The interaction of silicate with EPS on cell surfaces negatively decreased the zeta potentials of bacteria, resulting in the decreased cell transport in bare quartz sand when silicate was copresent in bacteria suspensions. In contrast, the presence of silicate in suspensions increased cell transport in iron mineral-coated sand. Silicate ions competed with bacteria for the adsorption sites on mineral-coated sand, contributing to the increased cell transport in mineral-coated sand with silicate present in cell suspensions. Copyright © 2014 Elsevier B.V. All rights reserved.

  17. 'Sharks Teeth' -- Sand Dunes in Proctor Crater

    Science.gov (United States)

    2001-01-01

    Sometimes, pictures received from Mars Global Surveyor's Mars Orbiter Camera (MOC) are 'just plain pretty.' This image, taken in early September 2000, shows a group of sand dunes at the edge of a much larger field of dark-toned dunes in Proctor Crater. Located at 47.9oS, 330.4oW, in the 170 km (106 mile) diameter crater named for 19th Century British astronomer Richard A. Proctor (1837-1888), the dunes shown here are created by winds blowing largely from the east/northeast. A plethora of smaller, brighter ripples covers the substrate between the dunes. Sunlight illuminates them from the upper left.

  18. Sphere impact and penetration into wet sand

    KAUST Repository

    Marston, J. O.

    2012-08-07

    We present experimental results for the penetration of a solid sphere when released onto wet sand. We show, by measuring the final penetration depth, that the cohesion induced by the water can result in either a deeper or shallower penetration for a given release height compared to dry granular material. Thus the presence of water can either lubricate or stiffen the granular material. By assuming the shear rate is proportional to the impact velocity and using the depth-averaged stopping force in calculating the shear stress, we derive effective viscosities for the wet granular materials.

  19. Biogenic crust dynamics on sand dunes

    CERN Document Server

    Kinast, Shai; Yizhaq, Hezi; Ashkenazy, Yosef

    2012-01-01

    Sand dunes are often covered by vegetation and biogenic crusts. Despite their significant role in dune stabilization, biogenic crusts have rarely been considered in studies of dune dynamics. Using a simple model, we study the existence and stability ranges of different dune-cover states along gradients of rainfall and wind power. Two ranges of alternative stable states are identified: fixed crusted dunes and fixed vegetated dunes at low wind power, and fixed vegetated dunes and active dunes at high wind power. These results suggest a cross-over between two different forms of desertification.

  20. Heating tar sands formations while controlling pressure

    Science.gov (United States)

    Stegemeier, George Leo [Houston, TX; Beer, Gary Lee [Houston, TX; Zhang, Etuan [Houston, TX

    2010-01-12

    Methods for treating a tar sands formation are described herein. Methods may include heating at least a section of a hydrocarbon layer in the formation from a plurality of heaters located in the formation. A pressure in the majority of the section may be maintained below a fracture pressure of the formation. The pressure in the majority of the section may be reduced to a selected pressure after the average temperature reaches a temperature that is above 240.degree. C. and is at or below pyrolysis temperatures of hydrocarbons in the section. At least some hydrocarbon fluids may be produced from the formation.

  1. Considerations on sand control in natural gas wells

    Directory of Open Access Journals (Sweden)

    Foidaş Ion

    2017-01-01

    Full Text Available Mechanism of sand production in gas wells is complex and influenced by every operation performed into the well, starting from the opening of the production interval by drilling, and continuing with completion and putting into production as well as with the exploitation regime. Sand production along with fluids from gas reservoirs creates a series of potentially dangerous and costly problems. For selecting the most appropriate methods of sand-control all the data and information related to properties of reservoir rock, the history of sand production, the potential well flow rates as well as HSE and costs need to be evaluated. The conclusion of the authors is that the best results in sand control is achieved when the methods are applied before the production of sand may become an issue.

  2. Deformation and shock consolidation of various sands under explosive loading

    Science.gov (United States)

    Weckert, S. A.; Resnyansky, A. D.

    2017-01-01

    The response of various geological materials to shock loading is important in both military and industrial applications. The composition of a real soil is complex and involves multiple constituents that undergo a number of physical and mechanical transformations during the shock loading. The present study analyzes several sands, a limestone sand both wet and dry, and a dry silica sand representing simplified model system for the soil. The sands are compressed using two different steel encapsulation assemblies subject to loading by explosive detonation products. These set-ups attempt to vary the magnitude and duration of applied pressure and temperature to the encapsulated sand. A comparative analysis of the recovered sand samples, including a microstructural analysis focusing on the grain breakage, compaction and consolidation, is correlated with a CTH numerical analysis employing a multi-phase rate sensitive material model.

  3. Environmental consequences of oil production from oil sands

    Science.gov (United States)

    Rosa, Lorenzo; Davis, Kyle F.; Rulli, Maria C.; D'Odorico, Paolo

    2017-02-01

    Crude oil from oil sands will constitute a substantial share of future global oil demand. Oil sands deposits account for a third of globally proven oil reserves, underlie large natural forested areas, and have extraction methods requiring large volumes of freshwater. Yet little work has been done to quantify some of the main environmental impacts of oil sands operations. Here we examine forest loss and water use for the world's major oil sands deposits. We calculate actual and potential rates of water use and forest loss both in Canadian deposits, where oil sands extraction is already taking place, and in other major deposits worldwide. We estimated that their exploitation, given projected production trends, could result in 1.31 km3 yr-1 of freshwater demand and 8700 km2 of forest loss. The expected escalation in oil sands extraction thus portends extensive environmental impacts.

  4. Modeling the response of shoreface-connected sand ridges to sand extraction on an inner shelf

    NARCIS (Netherlands)

    Nnafie, A.; de Swart, Huib; Calvete, D.; Garnier, R.

    2014-01-01

    Shoreface-connected sand ridges are rhythmic bedforms that occur on many storm-dominated inner shelves. The ridges span several kilometers, are a few meters high, and they evolve on a timescale of centuries. A processbased model is used to gain a fundamental insight into the response of these ridges

  5. Microwave processing of oil sands and contribution of clay minerals

    OpenAIRE

    Robinson, John; Binner, Eleanor; Saeid, Abdul; Al-Harahsheh, Mohammed; Kingman, Sam

    2014-01-01

    This study establishes the feasibility of microwave heating for extracting oil from Oil Sands in ex-situ processes. Previous studies in this area have shown some potential, but have not characterised the dielectric properties of the Oil Sands used, nor related them to the mineral composition, both of which are vital if successful scale up is to be achieved. In this work the fundamental interactions of microwave energy with Oil Sands are investigated and understood for the first time, and the ...

  6. MC-Parameter Calibration of Baskarp Sand No. 15

    DEFF Research Database (Denmark)

    Ibsen, Lars Bo; Hanson, Mats; Hjort, T.

    The soil parameters are dependent on both confining pressure and density index. The density index of Baskarp Sand can be determined by conducting cone penetration tests with the mini-CPT cone used in the Geotechnical Engineering Laboratory at Aalborg University. The unit weight of Baskarp Sand No...... several conventional drained triaxial tests at two different density indices performed on Baskarp Sand No. 15 (Ibsen & Bødker, 1994). The used triaxial tests are listed in Table 1 and Table 2....

  7. Provenance of coastal dune sands along Red Sea, Egypt

    Science.gov (United States)

    Zaid, Samir M.

    2017-06-01

    Texture, mineralogy, and major and trace element geochemistry of 26 coastal dune sand samples were studied to determine the provenance and tectonic environment of two dune fields close to the beaches of Safaga (SF) and Quseir (QS) at the Egyptian Red Sea coast. Onshore winds generate fine, moderate, moderately-well to well-sorted, coarse-skewed to near-symmetrical dune sands with mesokurtic distributions. Winds pick up and transport grains from nearby beach sands and alluvial deposits into a wide Red Sea coastal plain at the border of the beach. The mineralogical (Qt-Ft-Lt) and geochemical composition of the sands, indicate that SF and QS coastal dune sands are mature and influenced by quartz-rich sands. The average CIA values in SF and QS coastal dune sands are low relative to the range of the PAAS, suggesting an arid climate and a low intensity of chemical weathering. The SF and QS coastal dune sand samples are plotted in the recycled orogen and partly in craton interior fields suggesting recycled older sedimentary and partly metamorphic-plutonic sources. The high content of quartz with shell debris and carbonates in coastal dune sands support the recycled sedimentary beach and alluvial sand sources. The dominance of heavy minerals like amphiboles (hornblende) and biotite in the coastal dune sands also supports the effect of metamorphic-plutonic source rocks. The new tectonic discriminant-function diagrams suggest that the coastal dune sands were deposited in a passive margin of a synrift basin. The results provide a good evidence for the extension in the Red Sea rift system during Oligocene-post Pliocene, which is consistent with the general geology of Egypt.

  8. Adsorption of L-amino Acids on Sea Sand

    Directory of Open Access Journals (Sweden)

    Zaia Dimas A. M.

    2002-01-01

    Full Text Available A study of adsorption of L-alanine, L-tyrosine, L-glutamic acid, and L-lysine on sea sand was carried out. Only L-lysine showed adsorption on sea sand, probably due to the presence of the positively charged R group. Our results raise some doubts as to whether sand was important for the pre-concentration of amino acids prior to peptide condensation on the Pre-Biotic Earth.

  9. Investigations on Local Quartz Sand for Application in Glass Industry

    Science.gov (United States)

    Dararutana, Pisutti; Chetanachan, Prukswan; Wathanakul, Pornsawat; Sirikulrat, Narin

    2009-03-01

    Silica or glass sand is a special type of quartz sand that is suitable for glass-making, because of its high silica content, and its low content of iron oxide and other compounds. In Thailand, deposits of quartz sand are found as the beach and the river sands in many areas; eastern, southern, northeastern and northern. In this work, grain-size distribution and chemical analyses were carried out on 10 sand samples taken from various localities in Thailand such as Chanthaburi, Trat, Rayong, Chumphon, Nakhon Si, Pattani, Phuket, Songkhla, Nong Khai, and Tak provinces. The geological resources show that most of them are the surface-to-near-surface glass sand deposits. The sand grains in most deposits were mainly angular-to-rounded, except in some areas of either angular or rounded grains. Chemical analysis showed that the sands contained more than 95wt% silica and low content of Fe, Al, Ca, Mg, Na, and K. The concentration levels of these components in the samples confirm with internationally acceptable standard for glass production. The quartz sand dressing plants that used the spiral classifier to improve the properties of the quartz sands to meet the standard specifications are mostly located in the eastern area. It can be concluded that most of the quartz sand deposits in Thailand investigated show well-sorted grain-size with considerable purity, i.e. high-grade quality. The advanced works resulted in that these raw quartz sands can be used as raw material for fabrication of soda-lime, lead crystal, and lead-free high refractive index glasses. The colorless and various colored glass products have been satisfactorily used in the domestic art and glass manufactures.

  10. Developing a Sand Management Plan for Galveston Island

    Science.gov (United States)

    2015-10-16

    US Army Corps of Engineers BUILDING STRONG® Developing a Sand Management Plan for Galveston Island Ashley E. Frey, P. E. Research Civil...BUILDING STRONG® Problem Statement/Approach Recommend a long-term plan of actions to better manage sands on Galveston Island Initial Tasks...Formalize and document Galveston Island Sand Management Plan 3 Innovative solutions for a safer, better world BUILDING STRONG® Sediment

  11. Chemical and biological control of phlebotominae sand flies

    OpenAIRE

    Pružinová, Kateřina

    2010-01-01

    Phlebotominae sand flies (Diptera: Phlebotominae) are important vectors of leishmaniasis. Control measures are complicated by the fact that sand fly breeding sites and resting places are generally hard to find. Measures used to control adult sand flies include the use of chemical insecticides for insecticide-treated bednets or curtains, residual spraying of dwellings, eventually the space-spraying. Domestic dogs as reservoir host of visceral leishmaniosis can be protected by dog-collars impre...

  12. Numerical modeling of wind-blown sand on Mars.

    Science.gov (United States)

    Huang, HaoJie; Bo, TianLi; Zheng, XiaoJing

    2014-09-01

    Recent observation results show that sand ripples and dunes are movable like those on Earth under current Martian climate. And the aeolian process on Mars therefore is re-attracting the eyes of scientific researchers in different fields. In this paper, the spatial and temporal evolution of wind-blown sand on Mars is simulated by the large-eddy simulation method. The simulations are conducted under the conditions of both friction wind speed higher and lower than the "fluid threshold", respectively. The fluid entrainment of the sand particles, the processes among saltation sand particles and sand bed, and the negative feedback of sand movement to flow field are considered. Our results show that the "overshoot" phenomenon also exists in the evolution of wind-blown sand on Mars both temporally and spatially; impact entrainment affects the sand transport rate on Mars when the wind speed is smaller or larger than the fluid threshold; and both the average saltation length and height are one order of magnitudes larger than those on Earth. Eventually, the formulas describing the sand transport rate, average saltation length and height on Mars are given, respectively.

  13. [Influence of perlite sand on the skin in experiment].

    Science.gov (United States)

    Dracheva, E E; Iatsyna, I V; Lapina, N E; Ianin, V A; Antoshina, L I; Zhadan, I Iu; Krasavina, E K

    2012-01-01

    In the present work influence of perlite sand has been studied on a skin of Sprague-Dawley male rat (300-350 g). The biopsy of intact rat skin has been used as control. Contact of the perlite sand with animals' skin causes the reaction of an inflammation amplifying with increase of duration of the influence of substance. Therefore, despite an inert chemical compound, long contact with perlite sand in conditions of production can promote development of skin diseases. From the result of this investigation it is concluded that perlite sand causes irritating action on the skin and it is necessary to apply additional protective means to workers contacting to this substance.

  14. Effective Laboratory Method of Chromite Content Estimation in Reclaimed Sands

    Directory of Open Access Journals (Sweden)

    Ignaszak Z.

    2016-09-01

    Full Text Available The paper presents an original method of measuring the actual chromite content in the circulating moulding sand of foundry. This type of material is applied for production of moulds. This is the case of foundry which most frequently perform heavy casting in which for the construction of chemical hardening mould is used, both the quartz sand and chromite sand. After the dry reclamation of used moulding sand, both types of sands are mixed in various ratios resulting that in reclaimed sand silos, the layers of varying content of chromite in mixture are observed. For chromite recuperation from the circulating moulding sand there are applied the appropriate installations equipped with separate elements generating locally strong magnetic field. The knowledge of the current ratio of chromite and quartz sand allows to optimize the settings of installation and control of the separation efficiency. The arduous and time-consuming method of determining the content of chromite using bromoform liquid requires operational powers and precautions during using this toxic liquid. It was developed and tested the new, uncomplicated gravimetric laboratory method using powerful permanent magnets (neodymium. The method is used in the production conditions of casting for current inspection of chromite quantity in used sand in reclamation plant.

  15. Direct numerical simulations of aeolian sand ripples

    Science.gov (United States)

    Durán, Orencio; Claudin, Philippe; Andreotti, Bruno

    2014-01-01

    Aeolian sand beds exhibit regular patterns of ripples resulting from the interaction between topography and sediment transport. Their characteristics have been so far related to reptation transport caused by the impacts on the ground of grains entrained by the wind into saltation. By means of direct numerical simulations of grains interacting with a wind flow, we show that the instability turns out to be driven by resonant grain trajectories, whose length is close to a ripple wavelength and whose splash leads to a mass displacement toward the ripple crests. The pattern selection results from a compromise between this destabilizing mechanism and a diffusive downslope transport which stabilizes small wavelengths. The initial wavelength is set by the ratio of the sediment flux and the erosion/deposition rate, a ratio which increases linearly with the wind velocity. We show that this scaling law, in agreement with experiments, originates from an interfacial layer separating the saltation zone from the static sand bed, where momentum transfers are dominated by midair collisions. Finally, we provide quantitative support for the use of the propagation of these ripples as a proxy for remote measurements of sediment transport. PMID:25331873

  16. Guidelines to sand control. Pt. 3

    Energy Technology Data Exchange (ETDEWEB)

    Ayres, H.J.; Ramos, J.

    1972-10-01

    Well preparation is much more critical for consolidation processes than for most screen or pack applications. Of particular importance are (1) adequate cementing; (2) selectively perforating short intervals with clean perforating fluids; (3) cleaning perforations and face of formation; (4) proper isolation of zones; and (5) packing before consolidation. The desirable characteristics for a consolidation process include (1) minimum preparation time at well site; (2) low injection pressure; (3) short cure time before restoring well to production; (4) high compressive strength of resulting matrix; (5) high retained permeability; and (6) good resistance to deterioration from well fluids and commonly used treating fluids. For a given resin, some compromises are necessary. Methods are now available to control sand in nearly any well. A technique which has been growing in acceptance recently is the placement of sand and resin in a single operation. This service is available with several resins and is usually placed as a pressure pack. A wide variety of consolidation processes is available from a number of service companies. Each process has some advantages and each is probably adequate, if it is suited to the well conditions and good practice has been followed in preparing the well. (21 refs.)

  17. Avalanches of Singing Sand in the Laboratory

    Science.gov (United States)

    Dagois-Bohy, Simon; Courrech Du Pont, Sylvain; Douady, Stéphane

    2011-03-01

    The song of dunes is a natural phenomenon that has arisen travellers' curiosity for a long time, from Marco Polo to R.A. Bagnold. Scientific observations in the XXth century have shown that the sound is emitted during a shear flow of these particular grains, the free surface of the flow having coherent vibrations like a loud speaker. The sound emission is also submitted to a threshold effect with many parameters like humidity, flow speed, surface of the grains. The sound has been reproduced in laboratory avalanche experiments close to the natural phenomenon on field, but set in a channel with a hard bottom and a few centimeters of sand flowing, which contradicts explanations of the sound that involve a sand dune under the avalanche flow. Flow rates measurements also show the presence of a plug region in the flow above the sheared band, with the same characteristic length as the coherence zones of the sound. Finally we show experimentally that the Froude number, once modified to take into account the height of this plug band, is the parameter that sets the amplitude of the sound, and produces a threshold that depends on the grain type.

  18. Development and validation of model for sand

    Directory of Open Access Journals (Sweden)

    Church P.

    2015-01-01

    Full Text Available There is a growing requirement within QinetiQ to develop models for assessments when there is very little experimental data. A theoretical approach to developing equations of state for geological materials has been developed using Quantitative Structure Property Modelling based on the Porter-Gould model approach. This has been applied to well-controlled sand with different moisture contents and particle shapes. The Porter-Gould model describes an elastic response and gives good agreement at high impact pressures with experiment indicating that the response under these conditions is dominated by the molecular response. However at lower pressures the compaction behaviour is dominated by a micro-mechanical response which drives the need for additional theoretical tools and experiments to separate the volumetric and shear compaction behaviour. The constitutive response is fitted to existing triaxial cell data and Quasi-Static (QS compaction data. This data is then used to construct a model in the hydrocode. The model shows great promise in predicting plate impact, Hopkinson bar, fragment penetration and residual velocity of fragments through a finite thickness of sand.

  19. Microstructural characterization of a Canadian oil sand

    CERN Document Server

    Dinh, Hong Doan; Nauroy, Jean-François; Tang, Anh-Minh; Souhail, Youssef; 10.1139/T2012-072

    2013-01-01

    The microstructure of oil sand samples extracted at a depth of 75 m from the estuarine Middle McMurray formation (Alberta, Canada) has been investigated by using high resolution 3D X-Ray microtomography ($\\mu$CT) and Cryo Scanning Electron Microscopy (CryoSEM). $\\mu$CT images evidenced some dense areas composed of highly angular grains surrounded by fluids that are separated by larger pores full of gas. 3D Image analysis provided in dense areas porosity values compatible with in-situ log data and macroscopic laboratory determinations, showing that they are representative of intact states. $\\mu$CT hence provided some information on the morphology of the cracks and disturbance created by gas expansion. The CryoSEM technique, in which the sample is freeze fractured within the SEM chamber prior to observation, provided pictures in which the (frozen) bitumen clearly appears between the sand grains. No evidence of the existence of a thin connate water layer between grains and the bitumen, frequently mentioned in th...

  20. Comparison of buried sand ridges and regressive sand ridges on the outer shelf of the East China Sea

    Science.gov (United States)

    Wu, Ziyin; Jin, Xianglong; Zhou, Jieqiong; Zhao, Dineng; Shang, Jihong; Li, Shoujun; Cao, Zhenyi; Liang, Yuyang

    2017-06-01

    Based on multi-beam echo soundings and high-resolution single-channel seismic profiles, linear sand ridges in U14 and U2 on the East China Sea (ECS) shelf are identified and compared in detail. Linear sand ridges in U14 are buried sand ridges, which are 90 m below the seafloor. It is presumed that these buried sand ridges belong to the transgressive systems tract (TST) formed 320-200 ka ago and that their top interface is the maximal flooding surface (MFS). Linear sand ridges in U2 are regressive sand ridges. It is presumed that these buried sand ridges belong to the TST of the last glacial maximum (LGM) and that their top interface is the MFS of the LGM. Four sub-stage sand ridges of U2 are discerned from the high-resolution single-channel seismic profile and four strikes of regressive sand ridges are distinguished from the submarine topographic map based on the multi-beam echo soundings. These multi-stage and multi-strike linear sand ridges are the response of, and evidence for, the evolution of submarine topography with respect to sea-level fluctuations since the LGM. Although the difference in the age of formation between U14 and U2 is 200 ka and their sequences are 90 m apart, the general strikes of the sand ridges are similar. This indicates that the basic configuration of tidal waves on the ECS shelf has been stable for the last 200 ka. A basic evolutionary model of the strata of the ECS shelf is proposed, in which sea-level change is the controlling factor. During the sea-level change of about 100 ka, five to six strata are developed and the sand ridges develop in the TST. A similar story of the evolution of paleo-topography on the ECS shelf has been repeated during the last 300 ka.

  1. Metal biogeochemistry in constructed wetlands based on fluviatile sand and zeolite- and clinopyroxene-dominated lava sand

    OpenAIRE

    Huang, Jen-How; Paul, Sonja; Mayer, Silke; Moradpour, Eloise; Hasselbach, Ralf; Gier?, Reto; Alewell, Christine

    2017-01-01

    For the first time, speciation of Fe, Mn, Zn, Ni, Cu and Pb was determined along the profiles of 8 constructed wetlands (CWs) consisting of fluviatile sand (Fluv), clinopyroxene-dominated lava sand (Cl-LS) and zeolite-dominated lava sand (Ze-LS), aiming at quantifying metal behaviour in CWs and the impact caused by different filter materials. With the exception of Mn, which underwent reductive dissolution, CWs were sinks for the studied metals. Metal accumulation rates differed in the followi...

  2. A Mystery Unraveled: Booming Sand Dunes

    Science.gov (United States)

    Vriend, N. M.; Hunt, M. L.; Clayton, R. W.

    2007-12-01

    "Booming" sand dunes have intrigued travelers and scientist for centuries. These dunes emit a persistent, low-frequency sound during a slumping event or a natural avalanche on the leeward face of the dune. The sound can last for several minutes and be audible from miles away. The resulting acoustic emission is characterized by a dominant audible frequency (70 - 105 Hz) and several higher harmonics. In the work of Vriend et al. (2007), seismic refraction experiments proved the existence of a multi-layer internal structure in the dune that acts as a waveguide for the acoustic energy. Constructive interference between the reflecting waves enables the amplification and sets the frequency of each boom. A relationship was established that correctly predicts the measured frequency in terms of the thickness (~ 2.0 m) and the seismic body wave velocity of the loose, dry surficial layer (~ 240 m/s) and the substrate half-space (~ 350 m/s). The current work highlights additional measurements and simulations supporting the waveguide model for booming sand dunes. Experiments with ground penetrating radar continuously display the subsurface features which confirm the layered subsurface structure within the dune. Cross-correlation analysis shows that the booming sound propagates at speeds close to the measured body wave velocity. Squeaking sounds, which are generated during the onset of the slide and precede the sustained booming emission, have been found to have distinctly different characteristics. These short bursts of sound are emitted at a lower frequency (50 - 65 Hz) and propagate at a lower propagation speed (125 m/s) than the booming emission. The acoustic and elastic wave propagation in the dune has been simulated with a finite difference code. The interaction between the air and the ground produces a coupling wave along the surface. The reflections in the surficial layer propagate in a dispersive band at a group velocity that is slower than the phase velocity of the

  3. Properties of Desert Sand and CMAS Glass

    Science.gov (United States)

    Bansal, Narottam P.; Choi, Sung R.

    2014-01-01

    As-received desert sand from a Middle East country has been characterized for its phase composition and thermal stability. X-ray diffraction analysis showed the presence of quartz (SiO2), calcite (CaCO3), gypsum (CaSO4.2H2O), and NaAlSi3O8 phases in as-received desert sand and showed weight loss of approx. 35 percent due to decomposition of CaCO3 and CaSO4.2H2O when heated to 1400 C. A batch of as-received desert sand was melted into calcium magnesium aluminosilicate (CMAS) glass at approx. 1500 C. From inductively coupled plasma-atomic emission spectrometry, chemical composition of the CMAS glass was analyzed to be 27.8CaO-4MgO-5Al2O3-61.6SiO2-0.6Fe2O3-1K2O (mole percent). Various physical, thermal and mechanical properties of the glass have been evaluated. Bulk density of CMAS glass was 2.69 g/cc, Young's modulus 92 GPa, Shear modulus 36 GPa, Poisson's ratio 0.28, dilatometric glass transition temperature (T (sub g)) 706 C, softening point (T (sub d)) 764 C, Vickers microhardness 6.3 +/- 0.4 GPa, indentation fracture toughness 0.75 +/- 0.15 MPa.m (sup 1/2), and coefficient of thermal expansion (CTE) 9.8 x 10 (exp -6)/degC in the temperature range 25 to 700 C. Temperature dependence of viscosity has also been estimated from various reference points of the CMAS glass using the Vogel-Fulcher-Tamman (VFT) equation. The glass remained amorphous after heat treating at 850 C for 10 hr but crystallized into CaSiO3 and Ca-Mg-Al silicate phases at 900 C or higher temperatures. Crystallization kinetics of the CMAS glass has also been investigated by differential thermal analysis (DTA). Activation energies for the crystallization of two different phases in the glass were calculated to be 403 and 483 kJ/mol, respectively.

  4. Provenance of coastal dune sands along Red Sea, Egypt

    Indian Academy of Sciences (India)

    The average CIA values in SF and QS coastal dune sands are low relative to the range of the PAAS, suggesting an arid climate and a low intensity of chemical weathering. The SF and QS coastal dune sand samples are plotted in the recycled orogen and partly in craton interior fields suggesting recycled older sedimentary ...

  5. Sand-Laterite Mixtures for Road Construction (A Laboratory ...

    African Journals Online (AJOL)

    The results obtained show that for all types of laterites tested, the addition of sand to laterites has beneficial effects in reducing the liquid limit, the optimum moisture content, the plasticity index, the linear shrinkage and in increasing the maximum dry density and the California Bearing Ratio. There is an optimum sand ...

  6. Pathogen removal using saturated sand colums supplemented with hydrochar

    NARCIS (Netherlands)

    Chung, J.W.

    2015-01-01

    This PhD study has evaluated hydrochars derived from biowastes as adsorbents for pathogen removal in water treatment. Pathogen removal experiments were conducted by carrying out breakthrough analysis using a simple sand filtration set-up. Glass columns packed by 10 cm sand bed supplemented with

  7. Cytotoxicity of yellow sand in lung epithelial cells

    Indian Academy of Sciences (India)

    Unknown

    The Asian dust storms (called as 'yellow sand') bring a large amount of soil particles from the deserts of Mongo- lia and China to East Asia and North America. Yellow sand is a dust-laden air mass, and its effect to the atmos- pheric environment is of large concern in the Asian-. Pacific area including Korea, Japan and China.

  8. Geophysical mapping of the occurrence of shallow oil sands in ...

    African Journals Online (AJOL)

    ISHIOMA

    Oil sands are known to be an alternate source of energy and of great economic value. To map the occurrence of shallow oil sand deposits in Idiopopo, Okitipupa area in Ondo state southwestern. Nigeria, vertical electric sounding (VES) in 11 stations along 3 profiles were carried out using the. Schlumberger configuration.

  9. On Foundation Improvement By Sand Replacement | Abam | Global ...

    African Journals Online (AJOL)

    This paper describes a simple foundation improvement method involving the replacement of poor foundation bearing soils with sand and the resultant improvement in bearing capacity and the minimization of settlement at the site of a large storage tank. Minimum thickness of sand replacement for various foundation loads ...

  10. Effect of Crushed Sandstone Sand on the Properties of High ...

    African Journals Online (AJOL)

    Aggregates are the major constituents in the construction industry. With natural sand and gravel resources being rapidly depleted all over the world, the needs of construction industry will have to be met increasingly from crushed sand as fine aggregates. This paper presents results of the laboratory investigation on high ...

  11. The stable stiffness triangle - drained sand during deformation cycles

    DEFF Research Database (Denmark)

    Sabaliauskas, Tomas; Ibsen, Lars Bo

    2017-01-01

    Cyclic, drained sand stiffness was observed using the Danish triaxial appa- ratus. New, deformation dependant soil property (the stable stiffness triangle) was detected. Using the the stable stiffness triangle, secant stiffness of drained sand was plausible to predict (and control) even during...

  12. The extraction of bitumen from western tar sands

    Energy Technology Data Exchange (ETDEWEB)

    Oblad, A.G.; Bunger, J.W.; Deo, M.D.; Hanson, F.V.; Miller, J.D.; Seader, J.D.

    1990-07-01

    Topics discussed include: characterization of bitumen impregnated sandstone, water based tar sand separation technology, electrophoretic characterization of bitumen and fine mineral particles, bitumen and tar sand slurry viscosity, the hot water digestion-flotation process, electric field use on breaking water-in-oil emulsions, upgrading of bitumens and bitumen-derived liquids, solvent extraction.

  13. The extraction of bitumen from western tar sands. Annual report

    Energy Technology Data Exchange (ETDEWEB)

    Oblad, A.G.; Bunger, J.W.; Deo, M.D.; Hanson, F.V.; Miller, J.D.; Seader, J.D.

    1990-07-01

    Topics discussed include: characterization of bitumen impregnated sandstone, water based tar sand separation technology, electrophoretic characterization of bitumen and fine mineral particles, bitumen and tar sand slurry viscosity, the hot water digestion-flotation process, electric field use on breaking water-in-oil emulsions, upgrading of bitumens and bitumen-derived liquids, solvent extraction.

  14. Fine sand in motion: the influence of interstitial air

    NARCIS (Netherlands)

    Homan, T.A.M.

    2013-01-01

    Sand is a granular material, and therefore it consists of individual grains arranged in a packing. The pores in-between the grains are usually filled with a fluid, in this case air. Now, is this interstitial air able to influence the behavior of the sand bed as a whole? When a ball impacts on fine,

  15. Cavity prediction in sand mould production applying the DISAMATIC process

    DEFF Research Database (Denmark)

    Hovad, Emil; Larsen, Per; Spangenberg, Jon

    2017-01-01

    The sand shot in the DISAMATIC process is simulated by the discrete element method (DEM) taking into account the influence and coupling of the airflow with computational fluid dynamics (CFD). The DEM model is calibrated by a ring shear test, a sand pile experiment and a slump test. Subsequently, ...

  16. Modeling the dynamics of offshore tidal sand ridges

    NARCIS (Netherlands)

    Yuan, B.

    2017-01-01

    Tidal sand ridges are large-scale bedforms with horizontal dimensions of several kilometers and heights of tens of meters. They occur in the offshore area of shelf seas that have a wide range of water depths (10-200 m). Based on their present-day behavior, ridges are classified as `active' (sand

  17. Sand-Filtration System For Improving Water Quality For Rural ...

    African Journals Online (AJOL)

    The performance of a pilot sand filtration plant for a small town water supply was monitored over a seven month period to evaluate the physico-chemical and bacteriological quality of the filtered water from a system installed at Assin Praso in the Central Region of Ghana. The sand filter was effective in reducing turbidity by ...

  18. Geophysical mapping of the occurrence of shallow oil sands in ...

    African Journals Online (AJOL)

    Oil sands are known to be an alternate source of energy and of great economic value. To map the occurrence of shallow oil sand deposits in Idiopopo, Okitipupa area in Ondo state southwestern Nigeria, vertical electric sounding (VES) in 11 stations along 3 profiles were carried out using the Schlumberger configuration.

  19. Journal of EEA, Vol. 30, 2013 SAND SINTERING PROBLEM ON ...

    African Journals Online (AJOL)

    dell

    methods of sand sintering protection on the tin bronze impeller body and internal surfaces. The research ... causes of formation and protection of it [4, 5]. Based on the adhering characteristics of sand grain with ..... including pumps, pipes, taps and impellers .It is because they resist corrosion and impingent effect of water.

  20. Ecology and management of sand shinnery communities: a literature review

    Science.gov (United States)

    Roger Peterson; Chad S. Boyd

    2000-01-01

    Sand shinnery is codominated by oak shrubs and mid and tallgrasses; the grasses are usually taller than the oaks. The shrubs are the small, visible shoots of massive underground stem systems, which are hundreds or thousands of years old. Sand shinnery occupies 5 to 7 M acres in western Oklahoma, western Texas, and southeastern New Mexico. This area is a decrease from...

  1. Coastal Sand Dune Plant Ecology: Field Phenomena and Interpretation

    Science.gov (United States)

    McDonald, K.

    1973-01-01

    Discusses the advantages and disadvantages of selecting coastal sand dunes as the location for field ecology studies. Presents a descriptive zonal model for seaboard sand dune plant communities, suggestions concerning possible observations and activities relevant to interpreting phenomena associated with these forms of vegetation, and additional…

  2. Microwaves energy in curing process of water glass molding sands

    Directory of Open Access Journals (Sweden)

    Granat K.

    2007-01-01

    Full Text Available This work presents the results of investigation of microwave heating on hardening process of water glass molding sands. Essential influence of this heating process on basic properties such as: compression, bending and tensile strength as well as permeability and abrasion resistance has been found. It has been proved, that all investigated sorts of sodium water glass with a module between 2.0 and 3.3 can be used as a binder of molding sands in microwave curing process. It has been found during analysis of research results of sands with 2.5 % water glass addition that they are practically the same as in case of identical molding sands dried for 120 minutes at the temperature of 110°C, used for comparative purposes. Application of microwave curing of molding sands with water glass, however, guarantees reduction of hardening time (from 120 to 4 minutes as well as significant reduction of energy consumption. Attempts of two stage hardening of the investigated water glass molding sands have also been carried out, that is after an initial hardening during a classical CO2 process (identical sands have also been tested for comparison after CO2 blowing process and additional microwave heating. It has been found that application of this kind of treatment for curing sands with 2.5 % sodium water glass content and module from 2.0 up to 3.3 results in the improvement of properties in comparison to classical CO2 process.

  3. Assessing environmental impacts of inland sand mining in parts of ...

    African Journals Online (AJOL)

    Other impacts include loss of farmland, depreciation of land value, and destruction of infrastructural facilities. The study concluded that sand mining should be subject to planning and other controls in order to curtail its negative impacts. Keywords: Urbanization, Housing, GIS, Land degradation, Sand mining, Pollution ...

  4. Design, Construction and Testing of a Dry Sand Sieving Machine ...

    African Journals Online (AJOL)

    Michael Horsfall

    www.ajol.info and www.bioline.org.br/ja. Design, Construction and Testing of a Dry Sand Sieving Machine. OLADEJI AKANNI OGUNWOLE. Department of Mechanical Engineering, Federal University of Technology, Minna, Nigeria. ABSTRACT: This paper reports on the design, construction and Testing of a dry sand sieving.

  5. Acetylcholinesterase mutations and organophosphate resistance in sand flies and mosquitoes

    Science.gov (United States)

    The sand fly, Phlebotomus papatasi (Scopoli) is a major vector of Leishamnia major, the principle causative agent of human cutaneous leishmaniasis in the Middle East, southern Europe, northern Africa, and Southern Asia. Sand fly bites and leishmaniasis significantly impacted U.S. military operations...

  6. An Old-Growth Definition for Sand Pine Forests

    Science.gov (United States)

    Kenneth W. Outcalt

    1997-01-01

    Sand pine scrub, Society of American Foresters cover type 69 (Eyre 1980), grows on deep, droughty, infertile sands of marine and aeolian origin. Water and wind formed these features as sea levels fluctuated during past glacial and interglacial periods (Kurz 1942, Laessle 1958, Brooks 1972). Because of washing and sorting during transport and deposition, soil parent...

  7. Provenance Study Of Bituminous Sands In Eastern Dahomey Basin ...

    African Journals Online (AJOL)

    One hundred and twenty (120) tar sand samples were collected at 8 localities along the Nigerian tar sand belt for both quartz variety and heavy mineral analyses. The quartz variety study carried out on 30 samples revealed both polycrystalline and monocrystalline quartz types occurring in all samples but in different ...

  8. Thermal Conductivity of Compacted Bentonite and Bentonite-Sand Mixture

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Won Jin; Lee, Jae Owan; Kwon, Sang Ki [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2008-06-15

    For the Kyungju bentonite which is considered as a candidate material for the buffer and backfill in the high-level waste repository, the thermal conductivities of compacted bentonite and a bentonite-sand mixture were measured. The thermal conductivities of the compacted bentonite with a dry density of 1.2 to 1.8 Mg/m{sup 3}and the bentonite-sand mixture with a dry density of 1.6 and 1.8 Mg/m{sup 3} were measured within the gravimetric water content range of 10wt% to 20wt% and the sand fraction range of 10 to 30wt%. The thermal conductivity of compacted bentonite and a bentonite-sand mixture increases with increasing dry density and sand weight fraction in the case of constant water weight fraction, and increases with increasing water weight fraction and sand weight fraction in the case of constant dry density. The empirical correlations to describe the thermal conductivity of compacted bentonite and a bentonite-sand mixture as a function of water fraction at each dry density were suggested. These correlations can predict the thermal conductivities of bentonite and a bentonite-sand mixture with a difference below 10%.

  9. Test Setup for Axially Loaded Piles in Sand

    DEFF Research Database (Denmark)

    Thomassen, Kristina

    The test setup for testing axially static and cyclic loaded piles in sand is described in the following. The purpose for the tests is to examine the tensile capacity of axially loaded piles in dense fully saturated sand. The pile dimensions are chosen to resemble full scale dimension of piles used...... in offshore pile foundations today....

  10. Constitutive Soil Properties for Unwashed Sand and Kennedy Space Center

    Science.gov (United States)

    Thomas, Michael A.; Chitty, Daniel E.; Gildea, Martin L.; T'Kindt, Casey M.

    2008-01-01

    Accurate soil models are required for numerical simulations of land landings for the Orion Crew Exploration Vehicle. This report provides constitutive material models for one soil, unwashed sand, from NASA Langley's gantry drop test facility and three soils from Kennedy Space Center (KSC). The four soil models are based on mechanical and compressive behavior observed during geotechnical laboratory testing of remolded soil samples. The test specimens were reconstituted to measured in situ density and moisture content. Tests included: triaxial compression, hydrostatic compression, and uniaxial strain. A fit to the triaxial test results defines the strength envelope. Hydrostatic and uniaxial tests define the compressibility. The constitutive properties are presented in the format of LS-DYNA Material Model 5: Soil and Foam. However, the laboratory test data provided can be used to construct other material models. The four soil models are intended to be specific to the soil conditions discussed in the report. The unwashed sand model represents clayey sand at high density. The KSC models represent three distinct coastal sand conditions: low density dry sand, high density in-situ moisture sand, and high density flooded sand. It is possible to approximate other sands with these models, but the results would be unverified without geotechnical tests to confirm similar soil behavior.

  11. Compensation Grouting in Sand : Experiments, Field Experiences and Mechanisms

    NARCIS (Netherlands)

    Bezuijen, A.

    2010-01-01

    This thesis reports on experimental research on compensation grouting in sand. It is investigated in model tests, how the shape of the grout bodies made during injection depends on the grout properties, the density of the sand and the way the tubes are installed. The shape of the grout body affects

  12. Effects of oil sands sediments on fish

    Energy Technology Data Exchange (ETDEWEB)

    Parrott, J.; Colavecchia, M.; Hewitt, L.; Sherry, J.; Headley, J. [Environment Canada, Ottawa, ON (Canada); Turcotte, D.; Liber, K. [Saskatchewan Univ., Regina, SK (Canada)

    2010-07-01

    This paper described a collaborative project organized by Natural Resources Canada (NRCan) Panel of Energy Research and Development (PERD) with researchers from Environment Canada and the University of Saskatchewan. The 4-year study was conducted to assess the toxicity of oil sands sediments and river waters, and reclamation ponds and sediments on laboratory-raised fish. Three sediments from rivers were evaluated for their potential to cause adverse impacts on fathead minnow eggs and larvae for a period of 18 days. The study monitored hatching, larval survival, development, and growth. Naphthenic acids (NA), polycyclic aromatic hydrocarbons (PAHs) and metals were measured in the sediments to determine if the compounds can be correlated with observed toxicity. The study will also assess walleye eggs exposed to sediments, and in situ fish exposures. Toxicity identification and evaluation (TIE) studies will be conducted to isolate the fractions that may affect fish development and growth.

  13. Direct Production of Silicones From Sand

    Energy Technology Data Exchange (ETDEWEB)

    Larry N. Lewis; F.J. Schattenmann: J.P. Lemmon

    2001-09-30

    Silicon, in the form of silica and silicates, is the second most abundant element in the earth's crust. However the synthesis of silicones (scheme 1) and almost all organosilicon chemistry is only accessible through elemental silicon. Silicon dioxide (sand or quartz) is converted to chemical-grade elemental silicon in an energy intensive reduction process, a result of the exceptional thermodynamic stability of silica. Then, the silicon is reacted with methyl chloride to give a mixture of methylchlorosilanes catalyzed by cooper containing a variety of tract metals such as tin, zinc etc. The so-called direct process was first discovered at GE in 1940. The methylchlorosilanes are distilled to purify and separate the major reaction components, the most important of which is dimethyldichlorosilane. Polymerization of dimethyldichlorosilane by controlled hydrolysis results in the formation of silicone polymers. Worldwide, the silicones industry produces about 1.3 billion pounds of the basic silicon polymer, polydimethylsiloxane.

  14. The state of oil sands wetland reclamation

    Energy Technology Data Exchange (ETDEWEB)

    Foote, L. [Alberta Univ., Edmonton, AB (Canada)

    2010-07-01

    The state of oil sand and wetlands reclamation was the subject of this presentation. Wildlife habitat and response, plant community and production, and microbial biology were examples of research areas surrounding this body of knowledge. Hydrological research and landscape ecology were discussed along with peatlands and marshes such as the Corvette and the Kia. A few examples of what has been learned in the area of wetlands reclamation was presented. Other topics were also discussed, such as timeframes, pragmatic policy approaches, reclamation costs, research needs and some ideas on maturing the field. It was concluded that environmental conditions change with time and area because of time, chemistry, physics, stoichiometry, as well as biotic mediation and facilitation. figs.

  15. Western Gas Sands Project status report

    Energy Technology Data Exchange (ETDEWEB)

    Atkinson, C.H.

    1978-10-31

    This edition of the WGSP status report summarizes September 1978 progress of the government-sponsored projects directed towards increasing gas production from the low-permeability gas sands of the western United States. Background information is provided in the September 1977 Status Report, NVO/0655-100. The Williston Basin Symposium was held in Billings, Montana, the 24th through the 27th of September 1978. The USGS continued work on characterization and assessment of the resource in the four primary study areas and completed the 1978 field work in the Sand Wash and Green River Basins. CER Corporation is evaluating a Twin Arrow drill site, located on the Douglas Creek Arch for the possibility of obtaining core, and preparations are being made for the Logging Program meeting to be held at the CER offices the latter part of October, 1978. The design phase for the pressure coring system has been completed and work is progressing on the fabrication and testing of the improved system. The National Laboratories and Energy Technology Centers continued work on mathematical model development, new tools and instrumentation systems, data analysis techniques and rock mechanics. Work continued on the field tests and demonstrations aspect of the WGSP. Bids sent to several service companies by Mitchell Energy Corporation, for a massive fracture treatment, are due back in October and the treatment is expected to be performed in mid-November. Mobil Research and Development fractured Zone 8 of their PCU 31-13 well, then shut it in due to anticipated winter weather and work was started on Zone 9. Sandia's mineback program involved evaluation of the Hole No. 6 Formation Interface Fracture Experiment.

  16. Proceedings of the 7. annual Athabasca oil sands conference : oil sands trade show and conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    The Athabasca Oil Sands Projects are considered a major source energy supply for North America, which means increased commitments from producing companies to improve environmental impact and enhance the technology used for extraction and refining. This annual conference, which was hosted by the world's leading group of experts in the unconventional oil industry, provided a venue to network, do business and discover new strategies and innovations for the industry. The presentations highlighted thermal recovery methods, transportation infrastructure, and government policies designed to ensure project success. The four sessions of the conference were entitled: the oil sands landscape, technology advances; project updates; and, research and development. The conference featured 12 presentations, of which 4 have been catalogued separately for inclusion in this database. tabs., figs.

  17. Effect of Sand Wetting on Physically Hardened Moulding Sands Containing a Selected Inorganic Binder. Part 1

    Directory of Open Access Journals (Sweden)

    Stachowicz M.

    2016-03-01

    Full Text Available In the paper, an attempt was made to evaluate the effect of preliminary wetting of high-silica base during preparation of moulding sands containing a selected grade of sodium water-glass, designed for hardening by traditional drying or by electromagnetic microwaves at 2.45 GHz. In the research, some water was dosed during stirring the sandmix before adding 1.5 wt% of the binder that was unmodified sodium water-glass grade 137, characterised by high molar module within 3.2 to 3.4. Scope of the examinations included determining the effect of wetting the base on mechanical parameters like compression, bending and tensile strength, as well as on technological parameters like permeability, abrasion resistance and apparent density. The research revealed a significant positive effect of adding water to wet surfaces of high-silica base grains on mechanical properties and quality of moulding sands hardened by physical methods, in particular by microwave heating.

  18. Laboratory Test Setup for Cyclic Axially Loaded Piles in Sand

    DEFF Research Database (Denmark)

    Thomassen, Kristina; Ibsen, Lars Bo; Andersen, Lars Vabbersgaard

    2017-01-01

    This paper presents a comprehensive description and the considerations regarding the design of a new laboratory test setup for testing cyclic axially loaded piles in sand. The test setup aims at analysing the effect of axial one-way cyclic loading on pile capacity and accumulated displacements....... Another aim was to test a large diameter pile segment with dimensions resembling full-scale piles to model the interface properties between pile and sand correctly. The pile segment was an open-ended steel pipe pile with a diameter of 0.5 m and a length of 1 m. The sand conditions resembled the dense sand...... determined from the API RP 2GEO standard and from the test results indicated over consolidation of the sand. Two initial one-way cyclic loading tests provided results of effects on pile capacity and accumulated displacements in agreement with other researchers’ test results....

  19. Compressive Strength of Compacted Clay-Sand Mixes

    Directory of Open Access Journals (Sweden)

    Faseel Suleman Khan

    2014-01-01

    Full Text Available The use of sand to improve the strength of natural clays provides a viable alternative for civil infrastructure construction involving earthwork. The main objective of this note was to investigate the compressive strength of compacted clay-sand mixes. A natural clay of high plasticity was mixed with 20% and 40% sand (SP and their compaction and strength properties were determined. Results indicated that the investigated materials exhibited a brittle behaviour on the dry side of optimum and a ductile behaviour on the wet side of optimum. For each material, the compressive strength increased with an increase in density following a power law function. Conversely, the compressive strength increased with decreasing water content of the material following a similar function. Finally, the compressive strength decreased with an increase in sand content because of increased material heterogeneity and loss of sand grains from the sides during shearing.

  20. Traceability of optical length measurements on sand surfaces

    DEFF Research Database (Denmark)

    Mohaghegh, Kamran; Yazdanbakhsh, Seyed Alireza; Tiedje, Niels Skat

    2016-01-01

    This work concerns traceable measurements on moulds used in automatic casting lines made of green sand, which has a very low strength against the force of a contact probe. A metrological set-up was made based on the use of calibrated workpieces following ISO 15530-3 to determine the uncertainty...... of optical measurements on a sand surface. A new customised sand sample was developed using a hard binder to withstand the contact force of a touch probe, while keeping optical cooperativeness similar to that of green sand. The length of the sample was calibrated using a dial gauge set-up. An optical 3D...... scanner with fringe pattern projection was used to measure the length of a green sand sample (soft sample) with traceability transfer through the hard sample. Results confirm that the uncertainty of the optical scanner on the substituted hard sample is similar to that of the soft sample, so the hard...

  1. Thermal aspects of temperature transformations in silica sand

    Directory of Open Access Journals (Sweden)

    J.St. Kowalski

    2010-07-01

    Full Text Available Problems related with the choice of moulding sand composition considering its behaviour in contact with molten metal were discussed.The investigations of high-temperature phenomena enable moulding sand composition to be evaluated in terms of its applicability underthe specific conditions of a foundry shop. It is also possible to eliminate the casting defects related to moulding sand and its properties. The investigations were carried out on selected moulding sands from the family of the traditional carbon-free moulding mixtures. The effect of moulding sand composition and moisture content on the linear dilatation and stress formation caused by an allotropic quartz transformation was determined. The investigated phenomena were analysed on 3D diagrams plotted from the test data. A strong effect of the beta quartz - alpha quartz transformation at a temperature of about 6000C was stated.

  2. The effects of psammophilous plants on sand dune dynamics

    CERN Document Server

    Bel, Golan

    2013-01-01

    Psammophilous plants are special plants that flourish in sand moving environments. There are two main mechanisms by which the wind affects these plants: (i) sand drift exposes roots and covers branches--the exposed roots turn into new plants and the covered branches turn into new roots; both mechanisms result in an enhanced growth rate of the psammophilous plant cover of the dunes; (ii) strong winds, often associated with sand movement, tear branches and seed them in nearby locations, resulting in new plants and an enhanced growth rate of the psammophilous plant cover of the dunes. Despite their important role in dune dynamics, to our knowledge, psammophilous plants have never been incorporated into mathematical models of sand dunes. Here, we attempt to model the effects of these plants on sand dune dynamics. We construct a set of three ordinary differential equations for the fractions of surface cover of regular vegetation, biogenic soil crust and psammophilous plants. The latter reach their optimal growth u...

  3. Broadband Scattering from Sand and Sand/Mud Sediments with Extensive Environmental Characterization

    Science.gov (United States)

    2017-01-30

    Bryant, and G. Fechner, “Acoustic backscatter and sediment textural properties of inner shelf sands, northeastern Gulf of Mexico,” Geo -Mar. Lett., vol...comparisons using sediment fluid and Biot models,” IEEE J. Ocean. Eng., vol. 27, no. 3, pp. 376–387, 2002. [10] C.-C. Wang and D. Tang, “Seafloor Roughness...consequence of the scattering effects mentioned in the previous section. A similar negative dispersion has been observed in fluid -saturated glass

  4. Microbes in Beach Sands: Integrating Environment, Ecology and Public Health

    Science.gov (United States)

    Whitman, Richard; Harwood, Valerie J.; Edge, Thomas A.; Nevers, Meredith; Byappanahalli, Muruleedhara; Vijayavel, Kannappan; Brandão, João; Sadowsky, Michael J.; Alm, Elizabeth Wheeler; Crowe, Allan; Ferguson, Donna; Ge, Zhongfu; Halliday, Elizabeth; Kinzelman, Julie; Kleinheinz, Greg; Przybyla-Kelly, Kasia; Staley, Christopher; Staley, Zachery; Solo-Gabriele, Helena M.

    2014-01-01

    SUMMARY Beach sand is a habitat that supports many microbes, including viruses, bacteria, fungi and protozoa (micropsammon). The apparently inhospitable conditions of beach sand environments belie the thriving communities found there. Physical factors, such as water availability and protection from insolation; biological factors, such as competition, predation, and biofilm formation; and nutrient availability all contribute to the characteristics of the micropsammon. Sand microbial communities include autochthonous species/phylotypes indigenous to the environment. Allochthonous microbes, including fecal indicator bacteria (FIB) and waterborne pathogens, are deposited via waves, runoff, air, or animals. The fate of these microbes ranges from death, to transient persistence and/or replication, to establishment of thriving populations (naturalization) and integration in the autochthonous community. Transport of the micropsammon within the habitat occurs both horizontally across the beach, and vertically from the sand surface and ground water table, as well as at various scales including interstitial flow within sand pores, sediment transport for particle-associated microbes, and the large-scale processes of wave action and terrestrial runoff. The concept of beach sand as a microbial habitat and reservoir of FIB and pathogens has begun to influence our thinking about human health effects associated with sand exposure and recreational water use. A variety of pathogens have been reported from beach sands, and recent epidemiology studies have found some evidence of health risks associated with sand exposure. Persistent or replicating populations of FIB and enteric pathogens have consequences for watershed/beach management strategies and regulatory standards for safe beaches. This review summarizes our understanding of the community structure, ecology, fate, transport, and public health implications of microbes in beach sand. It concludes with recommendations for future

  5. Aeolian sand transport and aeolian deposits on Venus: A review

    Science.gov (United States)

    Kreslavsly, Mikhail A.; Bondarenko, Nataliya V.

    2017-06-01

    We review the current state of knowledge about aeolian sand transport and aeolian bedforms on planet Venus. This knowledge is limited by lack of observational data. Among the four planetary bodies of the Solar System with sufficient atmospheres in contact with solid surfaces, Venus has the densest atmosphere; the conditions there are transitional between those for terrestrial subaerial and subaqueous transport. The dense atmosphere causes low saltation threshold and short characteristic saltation length, and short scale length of the incipient dunes. A few lines of evidence indicate that the typical wind speeds exceed the saltation threshold; therefore, sand transport would be pervasive, if sand capable of saltation is available. Sand production on Venus is probably much slower than on the Earth; the major terrestrial sand sinks are also absent, however, lithification of sand through sintering is expected to be effective under Venus' conditions. Active transport is not detectable with the data available. Aeolian bedforms (transverse dunes) resolved in the currently available radar images occupy a tiny area on the planet; however, indirect observations suggest that small-scale unresolved aeolian bedforms are ubiquitous. Aeolian transport is probably limited by sand lithification causing shortage of saltation-capable material. Large impact events likely cause regional short-term spikes in aeolian transport by supplying a large amount of sand-size particles, as well as disintegration and activation of older indurated sand deposits. The data available are insufficient to understand whether the global aeolian sand transport occurs or not. More robust knowledge about aeolian transport on Venus is essential for future scientific exploration of the planet, in particular, for implementation and interpretation of geochemical studies of surface materials. High-resolution orbital radar imaging with local to regional coverage and desirable interferometric capabilities is the

  6. Microbes in Beach Sands: Integrating Environment, Ecology and Public Health.

    Science.gov (United States)

    Whitman, Richard; Harwood, Valerie J; Edge, Thomas A; Nevers, Meredith; Byappanahalli, Muruleedhara; Vijayavel, Kannappan; Brandão, João; Sadowsky, Michael J; Alm, Elizabeth Wheeler; Crowe, Allan; Ferguson, Donna; Ge, Zhongfu; Halliday, Elizabeth; Kinzelman, Julie; Kleinheinz, Greg; Przybyla-Kelly, Kasia; Staley, Christopher; Staley, Zachery; Solo-Gabriele, Helena M

    2014-09-01

    Beach sand is a habitat that supports many microbes, including viruses, bacteria, fungi and protozoa (micropsammon). The apparently inhospitable conditions of beach sand environments belie the thriving communities found there. Physical factors, such as water availability and protection from insolation; biological factors, such as competition, predation, and biofilm formation; and nutrient availability all contribute to the characteristics of the micropsammon. Sand microbial communities include autochthonous species/phylotypes indigenous to the environment. Allochthonous microbes, including fecal indicator bacteria (FIB) and waterborne pathogens, are deposited via waves, runoff, air, or animals. The fate of these microbes ranges from death, to transient persistence and/or replication, to establishment of thriving populations (naturalization) and integration in the autochthonous community. Transport of the micropsammon within the habitat occurs both horizontally across the beach, and vertically from the sand surface and ground water table, as well as at various scales including interstitial flow within sand pores, sediment transport for particle-associated microbes, and the large-scale processes of wave action and terrestrial runoff. The concept of beach sand as a microbial habitat and reservoir of FIB and pathogens has begun to influence our thinking about human health effects associated with sand exposure and recreational water use. A variety of pathogens have been reported from beach sands, and recent epidemiology studies have found some evidence of health risks associated with sand exposure. Persistent or replicating populations of FIB and enteric pathogens have consequences for watershed/beach management strategies and regulatory standards for safe beaches. This review summarizes our understanding of the community structure, ecology, fate, transport, and public health implications of microbes in beach sand. It concludes with recommendations for future work in

  7. The fluctuation property of blown sand particles and the wind-sand flow evolution studied by numerical method.

    Science.gov (United States)

    Ma, G S; Zheng, X J

    2011-05-01

    Sand particles blown by wind cause serious environmental problems and many researchers are trying to understand the dynamic properties of blown sand better. But the existing numerical approaches have not been able to simulate many important characteristics of wind-sand flow. In this paper, the evolution and fluctuation properties of blown sand at a dynamic steady state are investigated by using a more effective method. Using the LES (large eddy simulation) method for air phase movement and the DEM (discrete element method) for solid phase movement along with the existing particle-bed splashing function, we have characterized the whole movement property of the wind-sand system. The results indicate that the saturation time decreases with the inlet friction velocity, and it gradually reaches the shortest saturation time of about 1s; the saturation length, which is about 14 m at the usual wind velocity, first increases with wind velocity and then reaches a plateau; within the saturation length, the sand transport rate at different positions varies with time; the sand transport rate of the stable wind-sand flow is non-uniform with distance downwind and time, and has a notable correlation with the inflow friction velocity.

  8. The Geodiversity in Drift Sand Landscapes of The Netherlands

    Science.gov (United States)

    van den Ancker, Hanneke; Jungerius, Pieter Dirk; Riksen, Michel

    2015-04-01

    The authors carried out detailed field studies of more than twelve drift sand landscapes in The Netherlands. The objective of these studies was to restore Natura-2000 values by restoring the wind activity. Active drift sands occur almost exclusively in The Netherlands, Natura 2000 habitat 2330 'Inland dunes with open Corynephorus and Agrostis grasslands', for which reason our country is largely responsible for this European landscape. Active drift sands had almost disappeared for two reasons: first, the stabilization of the drift sands by air pollution, mainly nitrogen, which stimulates the growth of algae and grasses that initiate soil formation, and second, by the growth of forests surrounding the sands, which decreases the wind force. The restoration studies revealed differences in the geodiversity between and within the drift sand areas. Whereas the drift sands on geological and soil maps show as almost homogenous areas, they have in fact highly variable geo-conditions of which examples will be given. These geodiversity aspects concern differences in geomorphological structure, origin, sediments and age of the drift sands. Differences in wind and water erosion, trampling and soil formation add to the geodiversity within the drift sand areas. Especially in the primary stages of succession the differences in geodiversity are relevant for the Natura-2000 values. We discerned three main types of active sands. Firstly, the impressive drift sands with large parabolic dune structures, often consisting of series of interlocking parabolic dunes. They developed from the northeast towards the southwest, against the direction of the dominant wind, and must have taken centuries to develop. Small parts of these systems are still active, other parts show different degrees of soil formation. Their origin is still unclear but probably dates from medieval times (Heidinga, 1985, Jungerius & Riksen, 2008). Second are the drift sand areas with irregular hills from 0.5 to about 2

  9. Recurrence after gallbladder-preserving cholecystolithotomy for sand-like and non-sand-like gallstones: a comparative analysis

    Directory of Open Access Journals (Sweden)

    CHEN Zhi

    2016-07-01

    Full Text Available ObjectiveTo investigate the recurrence at 1-3 years after laparoscopic cholecystolithotomy in patients with sand-like and non-sand-like gallstones. MethodsA retrospective analysis was performed for the clinical data of 155 patients with gallstones who underwent gallbladder-preserving cholecystolithotomy in Air Force General Hospital, PLA from October 2012 to December 2014, and these patients were divided into sand-like stone group (29 patients and non-sand-like stone group (126 patients. The recurrence of stones was observed at 1-3 years after surgery. The t-test was used for comparison of continuous data between groups, and the chi-square test was used for comparison of categorical data between groups. ResultsThe time of operation showed a significant difference between the sand-like stone group and the non-sand-like stone group (126.13±20.52 min vs 75.64±16.58 min, t=7.709, P<0.001. At 1-3 years after surgery, 6 patients in the sand-like stone group and 8 in the non-sand-like stone group experienced recurrence, and the 2- and 3-year recurrence rates showed significant differences between the two groups (2-year recurrence rate: 20.69% vs 6.35%, χ2=4.284, P=0.038; 3-year recurrence rate: 20.69% vs 6.35%, χ2=4.284, P=0.038. ConclusionThe patients with sand-like gallstones have a significantly higher recurrence rate and a significantly longer time of operation than those with non-sand-like gallstones, and therefore, they should avoid gallbladder-preserving cholecystolithotomy.

  10. Sediment Analysis Network for Decision Support (SANDS)

    Science.gov (United States)

    Hardin, D. M.; Keiser, K.; Graves, S. J.; Conover, H.; Ebersole, S.

    2009-12-01

    Since the year 2000, Eastern Louisiana, coastal Mississippi, Alabama, and the western Florida panhandle have been affected by 28 tropical storms, seven of which were hurricanes. These tropical cyclones have significantly altered normal coastal processes and characteristics in the Gulf region through sediment disturbance. Although tides, seasonality, and agricultural development influence suspended sediment and sediment deposition over periods of time, tropical storm activity has the capability of moving the largest sediment loads in the shortest periods of time for coastal areas. The importance of sediments upon water quality, coastal erosion, habitats and nutrients has made their study and monitoring vital to decision makers in the region. Currently agencies such as United States Army Corps of Engineers (USACE), NASA, and Geological Survey of Alabama (GSA) are employing a variety of in-situ and airborne based measurements to assess and monitor sediment loading and deposition. These methods provide highly accurate information but are limited in geographic range, are not continuous over a region and, in the case of airborne LIDAR are expensive and do not recur on a regular basis. Multi-temporal and multi-spectral satellite imagery that shows tropical-storm-induced suspended sediment and storm-surge sediment deposits can provide decision makers with immediate and long-term information about the impacts of tropical storms and hurricanes. It can also be valuable for those conducting research and for projects related to coastal issues such as recovery, planning, management, and mitigation. The recently awarded Sediment Analysis Network for Decision Support will generate decision support products using NASA satellite observations from MODIS, Landsat and SeaWiFS instruments to support resource management, planning, and decision making activities in the Gulf of Mexico. Specifically, SANDS will generate decision support products that address the impacts of tropical storms

  11. The technique of sand control with expandable screens

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, P. [Petrochina, Liaohe (China). Liaohe Oilfield Co.

    2009-07-01

    Sand production in heavy oil reservoirs can limit the normal production of oil wells. In this study, expandable screens were used as a sand control mechanism by filtering the sand as it entered the wellbore. The screen systems consists of an expandable outer housing, an expandable base pipe and a filtering layer. The screen expands radially through an expandable cone and presses into the casing well. Axial tension is used to shrink the screens radially through a fishing anchor in order to remove them from the well. The lack of a sand ring between the screen and the casing increases the flow area of the oil and reduces flow resistance caused by fine silt blockages. A series of laboratory experiments were conducted to study the expansion and shrinkage properties of the screens. A field test conducted at a well located in the Liaohe oilfield in China demonstrated that good sand control results can be obtained without the need for pump checking. It was concluded that the sand control method is easy to use and provides good sand control results in large open flow areas. 2 refs., 2 tabs., 3 figs.

  12. Evaluation of wettability of binders used in moulding sands

    Directory of Open Access Journals (Sweden)

    Hutera B.

    2007-01-01

    Full Text Available Binders used in moulding sand have the differential properties. One of the main parameters influencing on moulding sand properties is wettability of the sand grain by binding material. In the article some problems concerned with wettability evaluation have been presented and the importance of this parameter for quantity description of process occurring in system: binder- sand grain has been mentioned. The procedure of wetting angle measurement and operation of prototype apparatus for wettability investigation of different binders used in moulding sand have been described, as well as the results of wetting angle measurement for different binders at different conditions. The addition of little amount of proper diluent to binder results in the state of equilibrium reached almost immediately. Such addition can also reduce the value of equilibrium contact angle. The uniform distribution of binder on the surface of the sand grains and reducing of the required mixing time can be obtained. It has also a positive effect on the moulding sand strength.

  13. Interaction Between Graphene Oxide Nanoparticles and Quartz Sand.

    Science.gov (United States)

    Sotirelis, Nikolaos P; Chrysikopoulos, Constantinos V

    2015-11-17

    In this study, the influence of pH, ionic strength (IS), and temperature on graphene oxide (GO) nanoparticles attachment onto quartz sand were investigated. Batch experiments were conducted at three controlled temperatures (4, 12, and 25 °C) in solutions with different pH values (pH 4, 7, and 10), and ionic strengths (IS = 1.4, 6.4, and 21.4 mM), under static and dynamic conditions. The surface properties of GO nanoparticles and quartz sand were evaluated by electrophoretic mobility measurements. Derjaguin-Landau-Verwey-Overbeek (DLVO) potential energy profiles were constructed for the experimental conditions, using measured zeta potentials. The experimental results showed that GO nanoparticles were very stable under the experimental conditions. Both temperature and pH did not play a significant role in the attachment of GO nanoparticles onto quartz sand. In contrast, IS was shown to influence attachment. The attachment of GO particles onto quartz sand increased significantly with increasing IS. The experimental data were fitted nicely with a Freundlich isotherm, and the attachment kinetics were satisfactorily described with a pseudo-second-order model, which implies that the quartz sand exhibited substantial surface heterogeneity and that GO retention was governed by chemisorption. Furthermore, thermodynamic analysis revealed that the attachment process was nonspontaneous and endothermic, which may be associated with structural changes of the sand surfaces due to chemisorption. Therefore, secondary minimum interaction may not be the dominant mechanism for GO attachment onto the quartz sand under the experimental conditions.

  14. Casting Ductile Iron in Layer Moulds Made from Ecological Sands

    Directory of Open Access Journals (Sweden)

    M. Rączka

    2012-09-01

    Full Text Available The article contains the results of tests performed under the target project in Hardtop Foundry Charsznica.The objective of the tests and studies was to develop a technology of making high-quality ductile iron castings, combined witheffective means of environmental protection. The studies presented in this article related to castings weighing from 1 to 300 kg made from ductile iron of grades 400-15 and 500-7, using two-layer moulds, where the facing and core sand was the sand with an alkaline organic binder, while backing sand was the sand with an inorganic geopolymer binder.A simplified method of sand reclamation was applied with possible reuse of the reclaim as an addition to the backing sand. The castiron spheroidising treatment and inoculation were selected taking into account the specific conditions of Hardtop Foundry. A pilot batch of castings was made, testing the gating and feeding systems and using exothermic sleeves on risers. The study confirmed the validity of the adopted concept of making ductile iron castings in layer moulds, while maintaining the content of sand with an organic binder at a level of maximum 15%.

  15. Research and practice of the impulse sand fracturing technology

    Directory of Open Access Journals (Sweden)

    Bin Qian

    2015-10-01

    Full Text Available With the deep development of tight sand gas reservoirs, problems such as short stable production period and quick production decline of gas wells after fracturing have become increasingly prominent. Consequently, there is an increasing demand for the effective penetration and conductivity of artificial fractures. Impulse sand fracturing technology introduces a concept of discrete multilayer sanding inside fractures; joint application of pulse blender which can be switched at high frequency, intensive multi-cluster perforation and special fibrous material made it possible to ensure the flow stability of proppant slug, and placement of nonuniformly-laid sand pinnacles and grooves, which markedly upgraded the capacity of the fracture conductivity to several orders of magnitude more than the conventional method. Laboratory engineering simulation evaluation and field test show that pre-fracturing reservoir evaluation, pulse time design and the optimization of degradable fiber and support equipment are the keys to the success of impulse sand fracturing. Compared with the conventional fracturing, this technique can effectively increase well production, decrease the volume of fracturing proppant, and lower sand plugging risks. An independent sand fracturing pilot test has been conducted in 6 layers of 3 wells for the first time in Block Tao 7 of the Sulige Gasfield, Ordos Basin, as a result, the average volume of fracturing proppant dropped by 28.3%, the average sand intensity dropped by 21.88%, and the post-fracturing average daily gas output increased by 26.8%. This technology provides an efficient and environmentally friendly reservoir stimulation option for tight sand gas reservoirs in China.

  16. Treatment of Wastewater from Backwashing Process Sand Filters

    Directory of Open Access Journals (Sweden)

    Miletić, S.

    2011-10-01

    Full Text Available In the process of raw water treatment for use in the petrochemical industry, one of the most important treatments is the filtration process with process sand filters. A by-product of the filtration process of raw water is wastewater. The wastewater results from the technological process of backwashing process sand filters. Wastewater from backwashing sand filters is unsuitable for further use, since it is contaminated with residual suspended matter and chemical compounds that are added in the process of raw water clarification. To reduce the environmental impact of such wastewater and improve overall system processing of raw water, this paper presents the technological treatment of wastewater from backwashing process sand filters. The selected technological process with subsequent sedimentation of suspended matter from the wastewater enables it to be returned into the process stream. This paper also presents a wastewater treatment system, which consists of a concrete sedimentation tank, pumps, pipelines, and flocculator for the final acceptance of the wastewater. The treatment system of wastewater from backwashing process sand filters includes the wastewater from backwashing sand filters for the filtration of the clarified water after clarification of the raw water, sand filters for the filtration of the cooling water and sand filters for filtration of clarified water prior to ion decarbonatisation. The overall technological process is efficiently sized and fully automated. The treatment of wastewater from backwashing process sand filters allows the successful and continuous return of the water in a volume flow, Q, from 80 m3h-1 to 85 m3 h-1, with no negative impact on the clarification of raw water. The constructed technological solution resulted in 12-percent less use of raw water from the Pakra accumulation lake, as well as 50-percent less discharge of the wastewater into natural watercourses.

  17. High Temperature Thermal Properties of Bentonite Foundry Sand

    Directory of Open Access Journals (Sweden)

    Krajewski P.K.

    2015-06-01

    Full Text Available The paper presents results of measuring thermal conductivity and heat capacity of bentonite foundry sand in temperature range ambient - 900­­°C. During the experiments a technical purity Cu plate was cast into the green-sand moulds. Basing on measurements of the mould temperature field during the solidification of the casting, the temperature relationships of the measured properties were evaluated. It was confirmed that water vaporization strongly influences thermal conductivity of the moulding sand in the first period of the mould heating by the poured casting.

  18. Strength properties of moulding sands with chosen biopolymer binders

    Directory of Open Access Journals (Sweden)

    St.M. Dobosz

    2010-07-01

    Full Text Available The article presents the results of primary researches of the IV generation moulding sands, in which as the binders are used differentbiodegradable materials. The bending and the tensile strength of the moulding sands with polylactide, poly(lactic-co-glycolic acid,polycaprolactone, polyhydroxybutyrate and cellulose acetate as binders were measured. The researches show that the best strengthproperties have the moulding sands with polylactide as binder. It was proved that the tested moulding sands’ strength properties are goodenough for foundry practice.

  19. Improved Probe for Evaluating Compaction of Mold Sand

    Science.gov (United States)

    Overfelt, Ruel A.; Bakhtiyarov, Sayavur I.

    2008-01-01

    A nominally stationary tubular probe denoted a telescopic probe has been developed as an improved alternative to a prior movable probe used to evaluate the local degree of compaction of mold sand. The probe is inserted vertically to a desired depth in a sand-filled molding flask and the back pressure at the given rate of flow of air is recorded as a measure of the degree of partial impermeability and, hence, of the degree of compaction of sand in the vicinity of the probe tip.

  20. Strength Characteristics of Quarry Dust in Replacement of Sand

    Science.gov (United States)

    Shyam Prakash, K.; Hanumantha Rao, Ch, Dr

    2017-08-01

    The replacement of natural fine aggregate by using quarry dust leads to consumption of generated quarry dust, the requirement of land fill area can be reduced and solves the natural sand scarcity problem. The sand availability as a fine aggregate at low cost which needs the reason to search as a alternative material. Even it causes saddle to dump the crusher dust at one place which causes environmental pollution. The chemical analysis, specific gravity, sieve analysis and compressive strength is identified for various percentage and grades of concrete by replacement of sand with quarry dust.

  1. Differences and commonalities impregnation of dry and wet sand

    Directory of Open Access Journals (Sweden)

    Maujuda МUZAFFAROVA

    2014-09-01

    Full Text Available The article is devoted to research new methods of physic-chemical methods of preventing deflation to protect railways and highways from such phenomena as exogenous sand drifts. In particular, first studied the possibility of using binders in sand wet state. Results can significantly extend the scope of the method, and identified with particular impregnation maintaining stability requirements protective cover reduces both the concentration previously recommended binders, and their costs, thereby securing implementation in practice of shifting sands resource-saving technology.

  2. Used Furan Sand Reclamation in REGMAS Vibratory Unit

    Directory of Open Access Journals (Sweden)

    Dańko J.

    2015-09-01

    Full Text Available The paper, especially dealt with problems of reclamation of used furan sand, carried out in new, vibratory sand reclamation unit REGMAS developed by researches from AGH-University of Science and Technology, Faculty of Foundry Engineering in Cracow (Poland. Functional characteristics of reclamation unit as well as the results of reclamation of used sand with furfuryl resin are discussed in the paper. The quality of reclaim was tested by means of the LOI and pH value, dust content in the reclaim and at least by the the quality of the castings produced in moulds prepared with the use of reclaimed matrix.

  3. Measurement of elastic modulus and evaluation of viscoelasticity of foundry green sand

    Directory of Open Access Journals (Sweden)

    Qingchun XIANG

    2004-08-01

    Full Text Available Elastic modulus is an important physical parameter of molding sand; it is closely connected with molding sand's properties. Based on theories of rheology and molding sand microdeformation, elastic modulus of molding sand was measured and investigated using the intelligent molding sand multi-property tester developed by ourselves. The measuring principle was introduced. Effects of bentonite percentage and compactibility of the molding sand were experimentally studied. Furthermore, the essential viscoelastic nature of green sand was analyzed. It is considered that viscoelastic deformation of molding sand consists mainly of that of Kelvin Body of clay membrane, and elastic modulus of molding sand depends mainly on that of Kelvin Body which is the elastic component of clay membrane between sands. Elastic modulus can be adopted as one of the property parameters, and can be employed to evaluate viscoelastic properties of molding sand.

  4. Fragmentation modeling of a resin bonded sand

    Science.gov (United States)

    Hilth, William; Ryckelynck, David

    2017-06-01

    Cemented sands exhibit a complex mechanical behavior that can lead to sophisticated models, with numerous parameters without real physical meaning. However, using a rather simple generalized critical state bonded soil model has proven to be a relevant compromise between an easy calibration and good results. The constitutive model formulation considers a non-associated elasto-plastic formulation within the critical state framework. The calibration procedure, using standard laboratory tests, is complemented by the study of an uniaxial compression test observed by tomography. Using finite elements simulations, this test is simulated considering a non-homogeneous 3D media. The tomography of compression sample gives access to 3D displacement fields by using image correlation techniques. Unfortunately these fields have missing experimental data because of the low resolution of correlations for low displacement magnitudes. We propose a recovery method that reconstructs 3D full displacement fields and 2D boundary displacement fields. These fields are mandatory for the calibration of the constitutive parameters by using 3D finite element simulations. The proposed recovery technique is based on a singular value decomposition of available experimental data. This calibration protocol enables an accurate prediction of the fragmentation of the specimen.

  5. New international developments in oil sands projects

    Energy Technology Data Exchange (ETDEWEB)

    Vercoe, J. [Fasken Martineau DuMoulin LLP, London (United Kingdom)

    2008-09-15

    Governments and oil companies from a variety of different countries are now working to create alternative oil and gas operations and the policies required to enable their financial success. The Africa Energy Commission was developed to coordinate policy and act as a framework for the African energy sector. Several large oil and gas operators have become involved in the creation of new contracts to develop training and human resources policies for the petroleum industry in Congo. Issues related to national oil companies and value creation in African countries are currently being studied by the World Bank. A biofuel alliance was recently signed between Congo and Brazil, and a Congo Forest Fund has also been created to help the inhabitants of the Congolese rainforest protect their environment. Congo is also offering opportunities for international companies to implement greenhouse gas (GHG) emission reduction programs to trade emission credits when requirements are satisfied. It was concluded that several African countries are suitable candidates for oil sands development. 1 fig.

  6. Effect of reclaimed sand additions on mechanical properties and fracture behavior of furan no-bake resin sand

    Directory of Open Access Journals (Sweden)

    Yan-lei Li

    2017-03-01

    Full Text Available In this work, the effects of reclaimed sand additions on the microstructure characteristics, mechanical properties and fracture behavior of furan no-bake resin sand have been investigated systematically within the temperature range from 25 to 600 篊. The addition of 20%-100% reclaimed sand showed dramatic strength deterioration effect at the same temperature, which is associated with the formation of bonding bridges. Both the ultimate tensile strength (UTS and compressive strength (CS of the moulding sand initially increase with the increase of temperature, and then sharply decrease with the further increase of temperature, which is attributed to the thermal decomposition of furan resin. The addition amount of reclaimed sand has a remarkable effect on the room temperature fracture mode, i.e., with the addition of 0-20% reclaimed sand, the fracture mode was mainly cohesive fracture; the fracture mode converts to be mixture fracture mode as the addition of reclaimed sand increases to 35%-70%; further increasing the addition to 100% results in the fracture mode of typical adhesive fracture. The fracture surface of the bonding bridge changes from a semblance of cotton or holes to smooth with the increase of test temperature.

  7. Eolian Dune, interdune, sand sheet, and Siliciclastic Sabkha sediments of an offshore prograding Sand Sea, Dhahran Area, Saudi Arabia

    Energy Technology Data Exchange (ETDEWEB)

    Fryberger, S.G.; Al-Sari, A.M.; Clisham, T.J.

    1983-02-01

    An offshore prograding sand sea exists along portions of the Arabian Gulf coastline near Dhahran, Saudi Arabia. In this region, sediments of eolian dune, interdune, sand sheet, and siliciclastic sabkha intercalate with marine deposits. This depositional setting is characterized by strong offshore winds which supply abundant sand to the coastline, and cause at present time the outbuilding of the dune system. This quartz-detrital dominant setting contrasts markedly with the carbonate dominant setting resulting from onshore winds in the Trucial Coast area to the south. The broad intercalation of eolian and marine deposits which results creates ideal potential for subregional stratigraphic petroleum traps, due to pinch-out of porous and permeable dune sands into impermeable marine mudstones. Within the eolian system itself are potential reservoir rocks, sources, (organic-rich sabkha and interdune deposits), and seals (zones of early cementation in all deposits). Early cementation is very common in all facies of the eolian sand sea. The early cementation occurs owing to (1) soil formation, (2) deposition of pore-filling gypsiferous cements from saturated solutions near water table, and (3) addition of sand-size windblown evaporitic material to sands downwind of sabkhas.

  8. Eolian dune, interdune, sand sheet, and siliciclastic Sabkha sediments of an offshore prograding Sand Sea, Dhahran area, Saudi Arabia

    Energy Technology Data Exchange (ETDEWEB)

    Fryberger, S.G.; Al-Sari, A.M.; Clisham, T.J.

    1983-02-01

    An offshore prograding sand sea exists along portions of the Arabian Gulf coastline near Dhahran, Saudi Arabia. In this region, sediments of eolian dune, interdune, sand sheet, and siliciclastic sabkha intercalate with marine deposits. This depositional setting is characterized by strong offshore winds which supply abundant sand to the coastline, and cause at present time the outbuilding of the dune system. This quartz-detrital dominant setting contrasts markedly with the carbonate dominant setting resulting from onshore winds in the Trucial Coast area to the south. The broad intercalation of eolian and marine deposits which results creates ideal potential for subregional stratigraphic petroleum traps, due to pinch-out of porous and permeable dune sands into impermeable marine mudstones. Within the eolian system itself are potential reservoir rocks (dunes), sources (organic-rich sabkha and interdune deposits), and seals (zones of early cementation in all deposits). Early cementation is very common in all facies of the eolian sand sea. The early cementation occurs owing to (1) soil formation, (2) deposition of pore-filling gypsiferous cements from saturated solutions near water table, and (3) addition of sand-size windblown evaporitic material to sands downwind of sabkhas.

  9. Sand Point, Alaska Tsunami Forecast Grids for MOST Model

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Sand Point, Alaska Forecast Model Grids provides bathymetric data strictly for tsunami inundation modeling with the Method of Splitting Tsunami (MOST) model....

  10. Beach sand supply and transport at Kunduchi, Tanzania, and ...

    African Journals Online (AJOL)

    related infrastructure and the livelihoods of beach plain users. The nature and drivers of physical shoreline change at Kunduchi, near Dar es Salaam, and Bamburi, near Mombasa, are described with analyses of beach sand transport through the ...

  11. The effects of psammophilous plants on sand dune dynamics

    National Research Council Canada - National Science Library

    Bel, Golan; Ashkenazy, Yosef

    2014-01-01

    .... There are two main mechanisms by which the wind affects these plants: (i) sand drift results in the burial and exposure of plants, a process that is known to result in an enhanced growth rate, and (ii...

  12. Narrative report : Sand Lake National Wildlife Refuge : 1969

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Sand Lake NWR and the easement refuges outlines Refuge accomplishments during the 1969 calendar year. The report begins by...

  13. Grassland habitat monitoring plan [Sand Lake National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The Sand Lake National Wildlife Refuge Grassland Habitat Management Plan provides vision and specific guidance on managing grassland habitats for resources of...

  14. Reef community structure, Sand Island, Oahu HI, (NODC Accession 0000177)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These reports provide the results of nine years (1990-98) of an annual quantitative monitoring of shallow marine communities inshore of the Sand Island Ocean...

  15. Integrated Pest Management Plan for Sand Lake NWR Complex

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The purpose of the Integrated Pest Management Plan is to provide a comprehensive, environmentally sensitive approach to managing pests on the Sand Lake WMD. The...

  16. Characterization of environmental exposure to mineral sands by PDMS technique

    Energy Technology Data Exchange (ETDEWEB)

    Dias da Cunha, K. E-mail: kenya@ird.gov.br; Rickman, R.D. E-mail: rickman@mail.chem.tamu.edu; Barros Leite, C.V. E-mail: cvbl@vdg.fis.puc-rio.br

    2003-04-01

    The risk to human health due to exposure to aerosols depends on the intake pattern, the mass concentration and the speciation of the elements present in airborne particles. In this work plasma desorption mass spectrometry (PDMS) was used to identify the speciation of metals present in the urine sample of an individual environmentally exposed to mineral sands airborne particles. Aerosol samples were collected at a Brazilian region with high concentration of mineral sands (Buena village), using a six-stage cascade impactor. The mass median aerodynamic diameter (MMAD) determined indicated that the airborne particulate was in the fine fraction of the aerosols. In order to characterize human exposure to mineral sands dust a sample from one inhabitant was analyzed by PDMS. The analysis of the results shows that the inhabitant incorporated metals from mineral sands and suggests that the source of aerosols is the mineral processing plant located at the village.

  17. Annual report : 1940-1941 : Sand Lake National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Sand Lake NWR covers the 1941 fiscal year. Wildlife, water conditions, refuge improvements, recreational use, the NYA camp,...

  18. Narrative report : Sand Lake National Wildlife Refuge : 1965

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Sand Lake NWR and the easement refuges outlines Refuge accomplishments during the 1965 calendar year. The report begins by...

  19. Sand Lake Migratory Waterfowl Refuge : Monthly report : February, 1938

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report describes activities on Sand Lake Migratory Waterfowl Refuge during February of 1938. Weather conditions, waterfowl, upland game, birds, fur and predator...

  20. Sand Lake National Wildlife Refuge : Annual report : 1943-1944

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report describes activities on Sand Lake NWR from 1943 to 1944. Wildlife, water levels, Refuge development, economic uses, and easement refuges are discussed....

  1. Annual report : 1936-'37 : Sand Lake Migratory Waterfowl Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report covers activities on Sand Lake Migratory Waterfowl Refuge during the 1937 fiscal year. Weather conditions, water levels, wildlife,...

  2. Annual report : 1935-'36 : Sand Lake Migratory Waterfowl Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report covers activities on Sand Lake Migratory Waterfowl Refuge during the 1936 fiscal year. Weather conditions, water levels, farming,...

  3. Narrative report : Sand Lake National Wildlife Refuge : 1970

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Sand Lake NWR and the easement refuges outlines Refuge accomplishments during the 1970 calendar year. The report begins by...

  4. Narrative report : Sand Lake National Wildlife Refuge : 1966

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Sand Lake NWR and the easement refuges outlines Refuge accomplishments during the 1966 calendar year. The report begins by...

  5. Sand Lake Migratory Waterfowl Refuge : Monthly report : April, 1938

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report describes activities on Sand Lake Migratory Waterfowl Refuge during April of 1938. Weather conditions, waterfowl, upland game, CCC work, WPA work,...

  6. Narrative report : Sand Lake National Wildlife Refuge : 1968

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Sand Lake NWR and the easement refuges outlines Refuge accomplishments during the 1968 calendar year. The report begins by...

  7. [Sand Lake Migratory Waterfowl Refuge : Narrative report : 1935

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report covers activities on Sand Lake Migratory Waterfowl Refuge during 1935. The road construction, dam construction, food and cover,...

  8. Sand Lake Migratory Waterfowl Refuge : Monthly report : March, 1938

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report describes activities on Sand Lake Migratory Waterfowl Refuge during March of 1938. Weather conditions, waterfowl, upland game, fur and predator control,...

  9. Sand Lake Migratory Waterfowl Refuge : Monthly report : November 30, 1937

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report describes activities on Sand Lake Migratory Waterfowl Refuge during November of 1937. Weather conditions, upland game management, duck rescue, and...

  10. Documenting the global impacts of beach sand mining

    Science.gov (United States)

    Young, R.; Griffith, A.

    2009-04-01

    For centuries, beach sand has been mined for use as aggregate in concrete, for heavy minerals, and for construction fill. The global extent and impact of this phenomenon has gone relatively unnoticed by academics, NGOs, and major news sources. Most reports of sand mining activities are found at the very local scale (if the mining is ever documented at all). Yet, sand mining in many localities has resulted in the complete destruction of beach (and related) ecosystems along with severe impacts to coastal protection and tourism. The Program for the Study of Developed Shorelines at Western Carolina University and Beachcare.org have initiated the construction of a global database of beach sand mining activities. The database is being built through a combination of site visits and through the data mining of media resources, peer reviewed papers, and reports from private and governmental entities. Currently, we have documented sand mining in 35 countries on 6 continents representing the removal of millions of cubic meters of sand. Problems extend from Asia where critical infrastructure has been disrupted by sand mining to the Caribbean where policy reform has swiftly followed a highly publicized theft of sand. The Program for the Study of Developed Shorelines recently observed extensive sand mining in Morocco at the regional scale. Tens of kilometers of beach have been stripped of sand and the mining continues southward reducing hope of a thriving tourism-based economy. Problems caused by beach sand mining include: destruction of natural beaches and the ecosystems they protect (e.g. dunes, wetlands), habitat loss for globally important species (e.g. turtles, shorebirds), destruction of nearshore marine ecosystems, increased shoreline erosion rates, reduced protection from storms, tsunamis, and wave events, and economic losses through tourist abandonment and loss of coastal aesthetics. The threats posed by sand mining are made even more critical given the prospect of a

  11. Sand Lake National Wildlife Refuge : Wetlands narrative report : 1967

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This annual narrative report for Sand Lake WMD outlines Refuge accomplishments during the 1967 calendar year. The report begins by summarizing the weather...

  12. Santa Barbara Littoral Cell CRSMP Offshore Sand Sources 2009

    Data.gov (United States)

    California Department of Resources — Offshore sand sources exist at four known locations and potentially other yet to be explored regions within the nearshore coastal shelf. Significant reserves of fine...

  13. MODELING OF PROCESS OF THE MOLDING SAND DEFORMATIONAL CHARACTERISTICS TESTING

    Directory of Open Access Journals (Sweden)

    A. P. Melnikov

    2010-01-01

    Full Text Available It is shown that the ready-built mathematical model of molding sand will enable to control its characteristics and to make forecasting of technological parameters for providing of the given characteristics.

  14. Consolidation of the formation sand by chemical methods

    Directory of Open Access Journals (Sweden)

    Mariana Mihočová

    2006-10-01

    Full Text Available The sand control by consolidation involves the process of injecting chemicals into the naturally unconsolidated formation to provide an in situ grain-to-grain cementation. The sand consolidation chemicals are available for some 30 years. Several types of consolidating material were tried. Presently available systems utilize solidified plastics to provide the cementation. These systems include phenol resin, phenol-formaldehyde, epoxy, furan and phenolic-furfuryl.The sand consolidation with the steam injection is a novel technique. This process provides a highly alkaline liquid phase and temperatures to 300 °C to geochemically create cements by interacting with the dirty sand.While the formation consolidation has widely applied, our experience has proved a high level of success.

  15. The cone penetration test in unsaturated silty sands

    Directory of Open Access Journals (Sweden)

    Yang Hongwei

    2016-01-01

    Full Text Available Very little is known about how to interpret the cone penetration test (CPT when performed in unsaturated soils. The few published studies on the CPT in unsaturated soils have focused on either clean sands or a silt. In this study new results of laboratory-controlled CPTs in an unsaturated silty sand are presented. The silty sand exhibits hydraulic hysteresis and suction hardening. Suction is observed to have a pronounced affect on measured cone penetration resistance. For an isotropic net confining stress of 60 kPa it is observed that higher suctions give rise to cone penetration resistances that are 50% larger than those for lower suctions. A semi-theoretical correlation is presented that links measured cone penetration resistances to initial relative density and mean effective stress. For this silty sand it is shown that failing to account for suction may result in significant overestimations and unsafe predictions of soil properties from measured cone penetration resistances.

  16. Investigations of reclamation ability of used moulding sand with water glass binder and used sand with CO2 hardened alkaline resin

    Directory of Open Access Journals (Sweden)

    R. Dańko

    2010-04-01

    Full Text Available Introduction of modern moulding sands with the organic and unorganic binders requires the use of reclamation carried out in order to reuseof used sands. Used sands depending on the type of binding material are characterized by different susceptibility to the recoveryprocesses. Presented research is aimed at determining reclaimability of selected used sands, which are often used in the Polish foundryindustry. This applies to the used moulding sand with water glass binder hardener by esters (ethylene glycol diacetate - technology floster S and used moulding sand with Carbophen 5692 resin, hardened by CO2 as a representative for this type of resins used in foundry.

  17. Hierarchical organization of a Sardinian sand dune plant community

    Directory of Open Access Journals (Sweden)

    Valentina Cusseddu

    2016-07-01

    Full Text Available Coastal sand dunes have attracted the attention of plant ecologists for over a century, but they have largely relied on correlations to explain dune plant community organization. We examined long-standing hypotheses experimentally that sand binding, inter-specific interactions, abiotic factors and seedling recruitment are drivers of sand dune plant community structure in Sardinia, Italy. Removing foundation species from the fore-, middle- and back-dune habitats over three years led to erosion and habitat loss on the fore-dune and limited plant recovery that increased with dune elevation. Reciprocal species removals in all zones suggested that inter-specific competition is common, but that dominance is transient, particularly due to sand burial disturbance in the middle-dune. A fully factorial 2-year manipulation of water, nutrient availability and substrate stability revealed no significant proximate response to these physical factors in any dune zone. In the fore- and middle-dune, plant seeds are trapped under adult plants during seed germination, and seedling survivorship and growth generally increase with dune height in spite of increased herbivory in the back-dune. Sand and seed erosion leads to limited seed recruitment on the fore-dune while high summer temperatures and preemption of space lead to competitive dominance of woody plants in the back-dune. Our results suggest that Sardinian sand dune plant communities are organized hierarchically, structured by sand binding foundation species on the fore-dune, sand burial in the middle-dune and increasingly successful seedling recruitment, growth and competitive dominance in the back-dune.

  18. Western tight gas sands advanced logging workshop proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Jennings, J B; Carroll, Jr, H B [eds.

    1982-04-01

    An advanced logging research program is one major aspect of the Western Tight Sands Program. Purpose of this workshop is to help BETC define critical logging needs for tight gas sands and to allow free interchange of ideas on all aspects of the current logging research program. Sixteen papers and abstracts are included together with discussions. Separate abstracts have been prepared for the 12 papers. (DLC)

  19. Frac Sand Mines Are Preferentially Sited in Unzoned Rural Areas.

    Science.gov (United States)

    Locke, Christina

    2015-01-01

    Shifting markets can cause unexpected, stochastic changes in rural landscapes that may take local communities by surprise. Preferential siting of new industrial facilities in poor areas or in areas with few regulatory restrictions can have implications for environmental sustainability, human health, and social justice. This study focuses on frac sand mining-the mining of high-quality silica sand used in hydraulic fracturing processes for gas and oil extraction. Frac sand mining gained prominence in the 2000s in the upper midwestern United States where nonmetallic mining is regulated primarily by local zoning. I asked whether frac sand mines were more commonly sited in rural townships without formal zoning regulations or planning processes than in those that undertook zoning and planning before the frac sand boom. I also asked if mine prevalence was correlated with socioeconomic differences across townships. After creating a probability surface to map areas most suitable for frac sand mine occurrence, I developed neutral landscape models from which to compare actual mine distributions in zoned and unzoned areas at three different spatial extents. Mines were significantly clustered in unzoned jurisdictions at the statewide level and in 7 of the 8 counties with at least three frac sand mines and some unzoned land. Subsequent regression analyses showed mine prevalence to be uncorrelated with land value, tax rate, or per capita income, but correlated with remoteness and zoning. The predicted mine count in unzoned townships was over two times higher than that in zoned townships. However, the county with the most mines by far was under a county zoning ordinance, perhaps indicating industry preferences for locations with clear, homogenous rules over patchwork regulation. Rural communities can use the case of frac sand mining as motivation to discuss and plan for sudden land-use predicaments, rather than wait to grapple with unfamiliar legal processes during a period of

  20. Sustainable water management in Alberta's oil sands

    Energy Technology Data Exchange (ETDEWEB)

    Byers, Bill; Usher, Robyn; Roach, Andrea [CH2M HILL, Englewood, CO (United States); Lambert, Gord; Kotecha, Prit [Suncor Energy Inc., Calgary (Canada)

    2012-07-01

    The Canadian Association of Petroleum Producers forecast published in 2011 predicts that oil production from oil sands will increase by 50% in the next 3 years and double by 2020. This rate of growth will result in significant pressure on water resources; water use per barrel of oil sands production is comparable to other energy resources - about 2.5 barrels of fresh water per barrel of oil produced are used by mining operations and 0.5 barrels by in-situ operations. Suncor Energy Inc. (Suncor) was the first company to develop the oil sands in northern Alberta and holds one of the largest oil sands positions in Canada. In 2010, Suncor announced plans to increase production to more than 1 million barrels of oil equivalent per day by 2020, which it plans to achieve through oil sands production growth of approximately 10% per year. Because water supply and potential impacts to water quality are critical to its future growth, in 2010-2011 Suncor conducted a risk assessment to identify water-related business risks related to its northern Alberta operations. The assessment identified more than 20 high level business risks in strategic water risk areas including water supply, water reuse, storm water management, groundwater, waste management and river water return. The risk assessment results prompted development of a strategic roadmap to guide water stewardship across Suncor's regional operations. The roadmap describes goals, objectives, and specific activities for each of six key water risk areas, and informs prioritization and selection of prospective water management activities. Suncor is not only exploring water within its own boundaries, but is also collaborating with other oil sands producers to explore ways of integrating its water systems through industry consortia; Suncor is a member of the Oil Sands Leadership Initiative and of the recently formed Canadian Oil Sands Innovation Alliance, among others. (author)

  1. Hierarchical organization of a Sardinian sand dune plant community.

    Science.gov (United States)

    Cusseddu, Valentina; Ceccherelli, Giulia; Bertness, Mark

    2016-01-01

    Coastal sand dunes have attracted the attention of plant ecologists for over a century, but they have largely relied on correlations to explain dune plant community organization. We examined long-standing hypotheses experimentally that sand binding, inter-specific interactions, abiotic factors and seedling recruitment are drivers of sand dune plant community structure in Sardinia, Italy. Removing foundation species from the fore-, middle- and back-dune habitats over three years led to erosion and habitat loss on the fore-dune and limited plant recovery that increased with dune elevation. Reciprocal species removals in all zones suggested that inter-specific competition is common, but that dominance is transient, particularly due to sand burial disturbance in the middle-dune. A fully factorial 2-year manipulation of water, nutrient availability and substrate stability revealed no significant proximate response to these physical factors in any dune zone. In the fore- and middle-dune, plant seeds are trapped under adult plants during seed germination, and seedling survivorship and growth generally increase with dune height in spite of increased herbivory in the back-dune. Sand and seed erosion leads to limited seed recruitment on the fore-dune while high summer temperatures and preemption of space lead to competitive dominance of woody plants in the back-dune. Our results suggest that Sardinian sand dune plant communities are organized hierarchically, structured by sand binding foundation species on the fore-dune, sand burial in the middle-dune and increasingly successful seedling recruitment, growth and competitive dominance in the back-dune.

  2. Gas pressure in sand mould poured with cast iron

    Directory of Open Access Journals (Sweden)

    A. Chojecki

    2011-01-01

    Full Text Available The results of measurements of gas pressure in foundry moulds made from sands bonded with bentonite, sodium sil icate and furan resin were disclosed. It was found that the maximum pressure during pouring of mould with metal occurs in the case of bentonite sands, especially with the addition of coal dust. The effect of this pressure on the formation of surface defects in castings was examined.

  3. Frac Sand Mines Are Preferentially Sited in Unzoned Rural Areas.

    Directory of Open Access Journals (Sweden)

    Christina Locke

    Full Text Available Shifting markets can cause unexpected, stochastic changes in rural landscapes that may take local communities by surprise. Preferential siting of new industrial facilities in poor areas or in areas with few regulatory restrictions can have implications for environmental sustainability, human health, and social justice. This study focuses on frac sand mining-the mining of high-quality silica sand used in hydraulic fracturing processes for gas and oil extraction. Frac sand mining gained prominence in the 2000s in the upper midwestern United States where nonmetallic mining is regulated primarily by local zoning. I asked whether frac sand mines were more commonly sited in rural townships without formal zoning regulations or planning processes than in those that undertook zoning and planning before the frac sand boom. I also asked if mine prevalence was correlated with socioeconomic differences across townships. After creating a probability surface to map areas most suitable for frac sand mine occurrence, I developed neutral landscape models from which to compare actual mine distributions in zoned and unzoned areas at three different spatial extents. Mines were significantly clustered in unzoned jurisdictions at the statewide level and in 7 of the 8 counties with at least three frac sand mines and some unzoned land. Subsequent regression analyses showed mine prevalence to be uncorrelated with land value, tax rate, or per capita income, but correlated with remoteness and zoning. The predicted mine count in unzoned townships was over two times higher than that in zoned townships. However, the county with the most mines by far was under a county zoning ordinance, perhaps indicating industry preferences for locations with clear, homogenous rules over patchwork regulation. Rural communities can use the case of frac sand mining as motivation to discuss and plan for sudden land-use predicaments, rather than wait to grapple with unfamiliar legal processes

  4. A new Stenothoe species (Crustacea: Amphipoda: Stenothoidae) living on Boloceropsis platei (Anthozoa: Actiniaria) from Chilean Patagonia

    Science.gov (United States)

    Krapp-Schickel, T.; Häussermann, V.; Vader, W.

    2015-06-01

    This paper describes a new species of Stenothoe (Amphipoda, Stenothoidae), S. boloceropsis sp. nov., collected among the tentacles of the sea anemone Boloceropsis platei Mc Murrich, 1904, found on sublittoral sand of Quellon, Chiloe Island, Chile.

  5. Sanding dust from nanoparticle-containing paints: Physical characterisation

    Science.gov (United States)

    Koponen, I. K.; Jensen, K. A.; Schneider, T.

    2009-02-01

    Increasing use of nanoparticles in different industrial applications has raised a new potential health risk to the workers as well as to the consumers. This study investigates the particle size distributions of sanding dust released from paints produced with and without engineered nanoparticles. Dust emissions from sanding painted plates were found to consist of five size modes; three modes under 1 μm and two modes around 1 and 2 μm. We observed that the sander was the only source of particles smaller than 50 nm and they dominated the number concentration spectra. Mass and surface area spectra were dominated by the 1 and 2 μm modes. Addition of nanoparticles caused only minor changes in the geometric mean diameters of the particle modes generated during sanding of two paints doped with 17 nm TiO2 and 95 nm Carbon Black nanoparticles as compared to the size modes generated during sanding a conventional reference paint. However, the number concentrations in the different size modes varied considerably in between the two NP-doped paints and the reference paint. Therefore, from a physical point of view, there may be a difference in the exposure risk during sanding surfaces covered with nanoparticle-based paints as compared to sanding conventional paints.

  6. Electrochemical and Dry Sand Impact Erosion Studies on Carbon Steel.

    Science.gov (United States)

    Naz, M Y; Ismail, N I; Sulaiman, S A; Shukrullah, S

    2015-11-12

    This study investigated the dry and aqueous erosion of mild steel using electrochemical and dry sand impact techniques. In dry sand impact experiments, mild steel was eroded with 45 μm and 150 μm sand particles. Scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and micro-hardness techniques were used to elaborate the surface morphology of the eroded samples. The results revealed significant change in morphology of the eroded samples. In-depth analysis showed that although the metal erosion due to larger particles was significantly higher, the fines also notably damaged the metal surface. The surface damages were appreciably reduced with decrease in impact angle of the accelerated particles. The maximum damages were observed at an impact angle of 90°. The hardness of the samples treated with 45 μm and 150 μm sand remained in the range of 88.34 to 102.31 VHN and 87.7 to 97.55 VHN, respectively. In electrochemical experiments, a triple electrode probe was added into the metal treatment process. The linear polarization resistance (LPR) measurements were performed in slurries having 5% (by weight) of sand particles. LPR of the samples treated with 45 μm and 150 μm sand slurries was calculated about 949 Ω.cm(2) and 809 Ω.cm(2), respectively.

  7. Control of Phlebotomine Sand Flies in Iran: A Review Article

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Yaghoobi-Ershadi

    2016-10-01

    Full Text Available Leishmaniasis has long been known as a significant public health challenge in many parts of Iran. Phlebotomus pa­patasi and P. sergenti are the vectors of Zoonotic Cutaneous Leishmaniasis and Anthroponotic Cutaneous Leish­maniasis respectively, and 5 species of sand flies including P. kandelakii, P. neglectus, P. perfiliewi, P. keshishiani and P. alexandri are considered as probable vectors of Zoonotic visceral leishmaniasis. A literature search was per­formed of the relevant multiple databases from 1966 to 2013 to include studies on sand flies, vector control, leish­maniasis, Phlebotomus. Sand fly control in Iran began in 1966 by Iranian researchers, and long-term evaluation of its effects was completed in the study areas of the country. Herein, a review of vector control strategies in Iran to com­bat leishmaniasis including indoor residual spraying, application of chemicals in rodent burrows, impregnation of bed nets and curtains with insecticides, the use of insect repellents, impregnation of dog collars and the susceptibility of sand fly vectors to various insecticides has been summarized thus far. The investigation of the behavioral patterns of the adults of different sand fly species, introduction of biological insecticide agents, the use of insecticidal plants and other novel strategies for the control of sand fly populations have received much attention in the areas of studies, hence should be recommended and improved since they provide optimistic results.

  8. Sand Drift Potential by Wind in Shileh Plain of Sistan

    Directory of Open Access Journals (Sweden)

    S. Poormand

    2016-02-01

    Full Text Available Introduction: Wind erosion is one of the most important factors in desert environments. Prevailing winds can shift sand dunes and affect their accumulation and morphology. Also, wind regime determines the direction of sand dune mobility in different ways. Therefore, the wind regime, frequency, direction and velocity are supposed to be the most important factors to form the morphology of sand dunes. Wind energy and changes in different directions (wind regime have large impacts on the morphology, maintenance and transformation of wind features. Having a global knowledge of the magnitude of aeolian processes, we can assess the powerful impact of sand dune mobility on residential areas and infrastructures. The most important factors including the frequency, magnitude and directional mobility of aeolian processes have a very important effect on the entrainment and form of sand dunes. Materials and Methods: To understand and identify the wind erosion regions, wind regime is a useful way since there is a strong correlation between wind regimes and sand dune morphology and structure. Sand rose and wind rose are assumed to be easy, fast and most accurate methods for the identification of wind erosion. Wind regimes processes have been studied by many researchers who believed that investigating wind regimes and sand dune mobility gives a measure of drift potential. Drift potential is a measure of the sand-moving capability by wind; derived from reduction of surface-wind data through a weighting equation. To predict drift potential, wind velocity and direction data from meteorological synoptic stations were used. Regarding the estimation of sand transport rate by wind, many formulas exist such as Bagnold, Kawamura, and Lattau. Also, many software applications have been suggested. However, among these formulas, Fryberger’s is the best and has been widely used since 1979. Results and Discussion: The aim of this study was to analyze wind velocities and

  9. Constitutive Soil Properties for Mason Sand and Kennedy Space Center

    Science.gov (United States)

    Thomas, Michael A.; Chitty, Daniel E.

    2011-01-01

    Accurate soil models are required for numerical simulations of land landings for the Orion Crew Exploration Vehicle (CEV). This report provides constitutive material models for two soil conditions at Kennedy Space Center (KSC) and four conditions of Mason Sand. The Mason Sand is the test sand for LaRC s drop tests and swing tests of the Orion. The soil models are based on mechanical and compressive behavior observed during geotechnical laboratory testing of remolded soil samples. The test specimens were reconstituted to measured in situ density and moisture content. Tests included: triaxial compression, hydrostatic compression, and uniaxial strain. A fit to the triaxial test results defines the strength envelope. Hydrostatic and uniaxial tests define the compressibility. The constitutive properties are presented in the format of LSDYNA Material Model 5: Soil and Foam. However, the laboratory test data provided can be used to construct other material models. The soil models are intended to be specific to the soil conditions they were tested at. The two KSC models represent two conditions at KSC: low density dry sand and high density in-situ moisture sand. The Mason Sand model was tested at four conditions which encompass measured conditions at LaRC s drop test site.

  10. Simulation of barchan dynamics with inter-dune sand streams

    Energy Technology Data Exchange (ETDEWEB)

    Katsuki, Atsunari [College of Science and Technology, Nihon University, Funabashi 274-8501 (Japan); Kikuchi, Macoto, E-mail: katsuki@phys.ge.cst.niho-u.ac.jp [Cybermedia Center, Osaka University, Toyonaka 560-0043 (Japan)

    2011-06-15

    A group of barchans, crescent sand dunes, exhibit a characteristic flying-geese pattern in deserts on Earth and Mars. This pattern implies that an indirect interaction between barchans, mediated by an inter-dune sand stream, which is released from one barchan's horns and caught by another barchan, plays an important role in the dynamics of barchan fields. We used numerical simulations of a recently proposed cell model to investigate the effects of inter-dune sand streams on barchan fields. We found that a sand stream from a point source moves a downstream barchan laterally until the head of the barchan is finally situated behind the stream. This final configuration was shown to be stable by a linear stability analysis. These results indicate that flying-geese patterns are formed by the lateral motion of barchans mediated by inter-dune sand streams. By using simulations we also found a barchan mono-corridor generation effect, which is another effect of sand streams from point sources.

  11. Coagulation-flocculation in leachate treatment using modified micro sand

    Science.gov (United States)

    Thaldiri, Nur Hanani; Halim, Azhar Abdul

    2013-11-01

    Sanitary landfill leachate is considered as highly polluted wastewater, without any treatment, discharging into water system will cause underground water and surface water pollutions. This study was to investigate the treatability of the semi-aerobic landfill leachate via coagulation-flocculation using poly-aluminum chloride (PAC), cationic polymer, and modified micro sand. Leachate was collected from Pulau Burung Sanitary Landfill (PBSL) located in Penang, Malaysia. Coagulation-flocculation was performed by using jar test equipment and the effect of pH, dose of coagulant and dose of polymer toward removal of chemical oxygen demand (COD), color and suspended solid (SS) were examined. Micro sand was also used in this study to compare settling time of coagulation-flocculation process. The optimum pH, dose of coagulant (PAC) and dose of polymer (cationic) achieved were 7.0, 1000 mg/L and 8 mg/L, respectively. The dose of micro sand used for the settling time process was 300 mg/L. Results showed that 52.66% removal of COD, 97.16% removal of SS and 96.44% removal of color were achieved under optimum condition. The settling times for the settling down of the sludge or particles that formed during coagulation-flocculation process were 1 min with modified sand, 20 min with raw micro sand and 45 min without micro sand.

  12. Compacted sand-bentonite mixtures for hydraulic containment liners

    Directory of Open Access Journals (Sweden)

    Tanit Chalermyanont

    2005-03-01

    Full Text Available Sand is a pervious material in nature. Mixing sand with appropriate bentonite contents yields sandbentonite mixtures having low hydraulic conductivity that can be used as hydraulic containment liners. In this study, compaction tests were conducted to determine the optimum water content and maximum dry unit weight of compacted sand-bentonite mixtures. Direct shear and hydraulic conductivity tests were conducted to assess the shear strength parameters and hydraulic conductivity of compacted sand-bentonite mixtures. Test results indicate that hydraulic conductivity of mixtures decreases about four orders of magnitude when mixed with 5% bentonite or more. Mixing sand with bentonite, however, results in a decreased shear strength of the mixtures due to the swell of bentonite when soaked with water. For the mixtures with bentonite content varying from 0 to 9%, the hydraulic conductivity of the mixtures decreases from 3.60×10-5 to 4.13×10-9 cm/s; while the corresponding friction angle and swell ranges from 49 to 22 degrees and 0.85 to 10.32%, respectively. In addition, the compacted sand-bentonite mixture with 3% bentonite content could achieve low hydraulic conductivity of 1×10-7 cm/s which is a regular requirement for hydraulic containment liners, while still having relatively high shear strength.

  13. Geotechnical properties of cemented sands in steep slopes

    Science.gov (United States)

    Collins, B.D.; Sitar, N.

    2009-01-01

    An investigation into the geotechnical properties specific to assessing the stability of weakly and moderately cemented sand cliffs is presented. A case study from eroding coastal cliffs located in central California provides both the data and impetus for this study. Herein, weakly cemented sand is defined as having an unconfined compressive strength (UCS) of less than 100 kPa, and moderately cemented sand is defined as having UCS between 100 and 400 kPa. Testing shows that both materials fail in a brittle fashion and can be modeled effectively using linear Mohr-Coulomb strength parameters, although for weakly cemented sands, curvature of the failure envelope is more evident with decreasing friction and increasing cohesion at higher confinement. Triaxial tests performed to simulate the evolving stress state of an eroding cliff, using a reduction in confinement-type stress path, result in an order of magnitude decrease in strain at failure and a more brittle response. Tests aimed at examining the influence of wetting on steep slopes show that a 60% decrease in UCS, a 50% drop in cohesion, and 80% decrease in the tensile strength occurs in moderately cemented sand upon introduction to water. In weakly cemented sands, all compressive, cohesive, and tensile strength is lost upon wetting and saturation. The results indicate that particular attention must be given to the relative level of cementation, the effects of groundwater or surficial seepage, and the small-scale strain response when performing geotechnical slope stability analyses on these materials. ?? 2009 ASCE.

  14. Western gas sands project status report

    Energy Technology Data Exchange (ETDEWEB)

    1977-11-01

    The Western Gas Sands Project Plan, Project Implementation Plans and Project Plan Document FY 78 are in various stages of preparation. Information gathering by U.S. Geological Survey (USGS) of the initial data base for many of the project activities is nearing completion. Some base maps are complete and field investigations in the principal areas of interest are being conducted. Research and development by Energy Research Centers and National Laboratories were directed toward new tools and instrumentation systems, rock mechanics experiments, mathematical modeling, and data analysis. The Uinta Basin in Utah and Piceance Basin in Colorado have ongoing massive hydraulic fracture (MHF) experiments in the Upper Cretaceous tight gas formations. These are: CER Corporation, MHF 3; Gas Producing Enterprises, Natural Buttes No. 14, 18, 19, 20; Mobil Oil, F-31-13G; and Rio Blanco Natural Gas, 498-4-1. Colorado Interstate Gas Company has been awarded a contract to determine if productivity in low permeability reservoirs can be improved by reducing the interstitialwater saturation. They will be using two wells, the Sprague No. 1 and Miller No. 1, completed in the Dakota J formation in the Wattenberg Field in north central Colorado. All of the massive hydraulic fracture wells, with the exception of the Pacific Transmission well, have been fractured as planned. The Mobil and GPE No. 14, 18, and 20 wells show significant improvement as compared to original flow rates. The Mobil well is being tested for additional MHF treatments. Sandia Laboratories is continuing their research program in hydraulic fracturing at DOE's Nevada Test Site (NTS).

  15. Learning Design at White Sands Test Facility

    Science.gov (United States)

    Grotewiel, Shane

    2010-01-01

    During the Fall of 2010, I spent my time at NASA White Sands Test Facility in Las Cruces, NM as an Undergraduate Student Research Program (USRP) Intern. During that time, I was given three projects to work on: Large Altitude Simulation System (LASS) basket strainer, log books, and the design of a case for touch screen monitors used for simulations. I spent most of my time on the LASS basket strainer. The LASS system has a water feed line with a basket strainer that filters out rust. In 2009, there were three misfires which cost approximately $27,000 and about 8% of the allotted time. The strainer was getting a large change in pressure that would result in a shutdown of the system. I have designed a new basket that will eliminate the large pressure change and it can be used with the old basket strainer housing. The LASS system has three steam generators (modules). Documents pertaining to these modules are stored electronically, and the majority of the documents are not able to be searched with keywords, so they have to be gone through one by one. I have come up with an idea on how to organize these files so that the Propulsion Department may efficiently search through the documents needed. Propulsion also has a LASS simulator that incorporates two touch screen monitors. Currently these monitors are in six foot by two foot metal cabinet on wheels. During simulation these monitors are used in the block house and need to be taken out of the block house when not in use. I have designed different options for hand held cases for storing and transporting the monitors in and out of the block house. The three projects previously mentioned demonstrate my contributions to the Propulsion Department and have taught me real world experience that is essential in becoming a productive engineer.

  16. Evaluation of Rock Sand as a Filter Medium in the Slow Filtration ...

    African Journals Online (AJOL)

    Coral sand has been used as a filter medium in both the slow and the rapid filtration units of the water treatment plants in Mauritius for a long time. Coral sand is obtained by either the dredging of lagoons or from inland sand quarries. With time, extraction of coral sand was becoming detrimental to aquatic life in the lagoons.

  17. Prediction of sand transport over immobile gravel from supply limited to capacity conditions

    Science.gov (United States)

    The prediction of the transport of sand in armored gravel reaches downstream of dams is complicated by variable bed conditions ranging from sand transported through gravel to sand in transport over buried gravel. Knowledge of the rate of sand transport in these conditions, however, is necessary for...

  18. Evaluation of an Innovative Sand Filter for Small System Drinking Water Treatment

    Science.gov (United States)

    Results of evaluation of an innovative sand filter that uses the concepts of both slow and rapid sand filtration are presented in this article. The system uses a low-cost “Drum Sand Filter” (DSF) that consists of a 55-gallon drum filled with layers of sand of varying size. A low-...

  19. 40 CFR 436.40 - Applicability; description of the industrial sand subcategory.

    Science.gov (United States)

    2010-07-01

    ... industrial sand subcategory. 436.40 Section 436.40 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Sand Subcategory § 436.40 Applicability; description of the industrial sand subcategory. The provisions of this subpart are applicable to the mining and the processing of sand and gravel for uses other...

  20. 32 CFR 644.505 - Disposal plan for embedded gravel, sand or stone.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Disposal plan for embedded gravel, sand or stone. 644.505 Section 644.505 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... Gravel, Sand and Stone § 644.505 Disposal plan for embedded gravel, sand or stone. Prior to offering sand...

  1. Prediction of sand particle trajectories and sand erosion damage on helicopter rotor blades

    Science.gov (United States)

    Shin, Bong Gun

    Therefore, in this dissertation, accurate and time-efficient methodologies were developed for performing sand particle tracking and predicting sand erosion damage on actual helicopter rotor blades under realistic hover and vertical lift conditions. In this dissertation, first, injection (release) conditions of solid particles with new injection parameter, sand particle mass flow rate (SPmFR), were specified to deal with the effect of non-uniform and unsteady flow conditions surrounding at each injection point from which solid particles are released. The SPmFR defines the number of solid particles released from the same injection position per unit time. Secondly, a general definition of erosion rate, "mass or volume loss from the metal surface due to the impact of a unit "mass" of solid particles" was also modified by multiplying with SPmFR in order to solve the limitation for predicting erosion damage on actual helicopter rotor blade. Next, a suitable empirical particle rebound model and an erosion damage model for spherical sand particles with diameters ranging from 10 microm to 500 microm impacting on the material Ti-6A1-4V, the material of helicopter rotor blade, were developed. Finally, C++ language based codes in the form of User Defined Functions (UDFs) were developed and implemented into the commercially available multi-dimensional viscous flow solver ANSYS-FLUENT in order to develop and integrate with the general purpose flow solver, ANSYS-FLUENT, for a specific Lagrangian particle trajectory computing algorithm and rebound and erosion quantification purposes. In the erosion simulation, a reasonably accurate fluid flow solution is necessary. In order to validate the numerical results obtained in this dissertation, computations for flow-only around 2D RAE2822 airfoil and 3D rotating rotor blade (NACA0012) without any sand particle were performed. In the comparison of these results with experimental results, it is found that the flow solutions are in good

  2. The extraction of bitumen from western tar sands. Annual report, July 1990--July 1991

    Energy Technology Data Exchange (ETDEWEB)

    Oblad, A.G.; Bunger, J.W.; Deo, M.D.; Hanson, F.V.; Miller, J.D.; Seader, J.D.

    1992-04-01

    Contents of this report include the following: executive summary; characterization of the native bitumen from the Whiterocks oil sand deposit; influence of carboxylic acid content on bitumen viscosity; water based oil sand separation technology; extraction of bitumen from western oil sands by an energy-efficient thermal method; large- diameter fluidized bed reactor studies; rotary kiln pyrolysis of oil sand; catalytic upgrading of bitumen and bitumen derived liquids; ebullieted bed hydrotreating and hydrocracking; super critical fluid extraction; bitumen upgrading; 232 references; Appendix A--Whiterocks tar sand deposit bibliography; Appendix B--Asphalt Ridge tar sand deposit bibliography; and Appendix C--University of Utah tar sands bibliography.

  3. Wind energy environments and aeolian sand characteristics along the Qinghai-Tibet Railway, China

    Science.gov (United States)

    Zhang, Kecun; Qu, Jianjun; Han, Qingjie; An, Zhishan

    2012-10-01

    The Qinghai-Tibet Railway (QTR), the longest high-altitude railway in the world, is frequently damaged by windblown sand because of strong winds and abundant sand. Based on detailed wind data, in situ observations of windblown sand and field wind tunnel simulations along the QTR, this paper aims to clarify the characteristics of windblown sand with increasing altitude, and to show the dynamical environment of sand activities. The predominant wind is unidirectional along the QTR. In cold-high environments, sand transport rate increases with increasing wind velocity, but decreases exponentially with increasing height in the windstream. As the altitude increases, the threshold velocity for sand movement linearly increases with altitude, and the sand transport per unit width decreases gradually. The results can be used to guide the design of sand-control structures both in the study area and in other areas suffering from windblown sand.

  4. Simulating Sand Behavior through Terrain Subdivision and Particle Refinement

    Science.gov (United States)

    Clothier, M.

    2013-12-01

    Advances in computer graphics, GPUs, and parallel processing hardware have provided researchers with new methods to visualize scientific data. In fact, these advances have spurred new research opportunities between computer graphics and other disciplines, such as Earth sciences. Through collaboration, Earth and planetary scientists have benefited by using these advances in hardware technology to process large amounts of data for visualization and analysis. At Oregon State University, we are collaborating with the Oregon Space Grant and IGERT Ecosystem Informatics programs to investigate techniques for simulating the behavior of sand. In addition, we have also been collaborating with the Jet Propulsion Laboratory's DARTS Lab to exchange ideas on our research. The DARTS Lab specializes in the simulation of planetary vehicles, such as the Mars rovers. One aspect of their work is testing these vehicles in a virtual "sand box" to test their performance in different environments. Our research builds upon this idea to create a sand simulation framework to allow for more complex and diverse environments. As a basis for our framework, we have focused on planetary environments, such as the harsh, sandy regions on Mars. To evaluate our framework, we have used simulated planetary vehicles, such as a rover, to gain insight into the performance and interaction between the surface sand and the vehicle. Unfortunately, simulating the vast number of individual sand particles and their interaction with each other has been a computationally complex problem in the past. However, through the use of high-performance computing, we have developed a technique to subdivide physically active terrain regions across a large landscape. To achieve this, we only subdivide terrain regions where sand particles are actively participating with another object or force, such as a rover wheel. This is similar to a Level of Detail (LOD) technique, except that the density of subdivisions are determined by

  5. Interaction forces in bitumen extraction from oil sands.

    Science.gov (United States)

    Liu, Jianjun; Xu, Zhenghe; Masliyah, Jacob

    2005-07-15

    Water-based extraction process (WBEP) has been successfully applied to bitumen recovery from Athabasca oil sand ore deposits in Alberta. In this process, two essential steps are involved. The bitumen first needs to be "liberated" from sand grains, followed by "aeration" with air bubbles. Bitumen "liberation" from the sand grains is controlled by the interaction between the bitumen and sand grains. Bitumen "aeration" is dependent, among other mechanical and hydrodynamic variables, on the hydrophobicity of the bitumen surface, which is controlled by water chemistry and interactions between bitumen and fine solids. In this paper, the interaction force measured with an atomic force microscope (AFM) between bitumen-bitumen, bitumen-silica, bitumen-clays and bitumen-fines is summarized. The measured interaction force barrier coupled with the contacted adhesion force allows us to predict the coagulative state of colloidal systems. Zeta potential distribution measurements, in terms of heterocoagulation, confirmed the prediction of the measured force profiles using AFM. The results show that solution pH and calcium addition can significantly affect the colloidal interactions of various components in oil sand extraction systems. The strong attachment of fines from a poor processing ore on bitumen is responsible for the corresponding low bitumen flotation recovery. The identification of the dominant non-contact forces by fitting with the classical DLVO or extended DLVO theory provides guidance for controlling the interaction behavior of the oil sand components through monitoring the factors that could affect the non-contact forces. The findings provide insights into megascale industrial operations of oil sand extraction.

  6. Food web structure in oil sands reclaimed wetlands.

    Science.gov (United States)

    Kovalenko, K E; Ciborowski, J J H; Daly, C; Dixon, D G; Farwell, A J; Foote, A L; Frederick, K R; Costa, J M Gardner; Kennedy, K; Liber, K; Roy, M C; Slama, C A; Smits, J E G

    2013-07-01

    Boreal wetlands play an important role in global carbon balance. However, their ecosystem function is threatened by direct anthropogenic disturbance and climate change. Oil sands surface mining in the boreal regions of Western Canada denudes tracts of land of organic materials, leaves large areas in need of reclamation, and generates considerable quantities of extraction process-affected materials. Knowledge and validation of reclamation techniques that lead to self-sustaining wetlands has lagged behind development of protocols for reclaiming terrestrial systems. It is important to know whether wetlands reclaimed with oil sands process materials can be restored to levels equivalent to their original ecosystem function. We approached this question by assessing carbon flows and food web structure in naturally formed and oil sands-affected wetlands constructed in 1970-2004 in the postmining landscape. We evaluated whether a prescribed reclamation strategy, involving organic matter amendment, accelerated reclaimed wetland development, leading to wetlands that were more similar to their natural marsh counterparts than wetlands that were not supplemented with organic matter. We measured compartment standing stocks for bacterioplankton, microbial biofilm, macrophytes, detritus, and zoobenthos; concentrations of dissolved organic carbon and residual naphthenic acids; and microbial production, gas fluxes, and aquatic-terrestrial exports (i.e., aquatic insect emergence). The total biomass of several biotic compartments differed significantly between oil sands and reference wetlands. Submerged macrophyte biomass, macroinvertebrate trophic diversity, and predator biomass and richness were lower in oil sands-affected wetlands than in reference wetlands. There was insufficient evidence to conclude that wetland age and wetland amendment with peat-mineral mix mitigate effects of oil sands waste materials on the fully aquatic biota. Although high variability was observed within

  7. Laboratory spectroscopy experiment : Spectral reflectance of beach sand as function of surface moisture content with sample of beach sand collected from the Sand Motor, the Netherlands

    NARCIS (Netherlands)

    Nolet, C.; Roosjen, P.P.J.

    2015-01-01

    Spectral reflectance of beach sand (350-2500 nm) under different moisture conditions at 1 nm interval, obtained by a laboratory spectroscopy experiment. Optical remote sensing has the potential to measure surface moisture at a high spatio-temporal resolution. It is based on the principle that wet

  8. Proceedings of the 8. annual Athabasca oil sands conference : oil sands trade show and conference

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-07-01

    This conference featured the latest information on challenges, strategies, technologies, and labour issues facing the heavy oil industry. It was hosted by the world's leading group of experts in the unconventional oil industry and offered prime networking opportunities in an interactive setting for over 500 delegates from around the world. The Athabasca Oil Sands Projects are considered a major source energy supply for North America, which means increased commitments from producing companies to improve environmental impact and enhance the technology used for extraction and refining. Advances in thermal recovery operations, notably steam assisted gravity drainage (SAGD), were highlighted along with new pumping technologies and tailings management issues. The sessions of the conference were entitled: project updates; pumping for the future; and, operational concerns. The conference featured 16 presentations, of which 5 have been catalogued separately for inclusion in this database. tabs., figs.

  9. Coastal geology and recent origins for Sand Point, Lake Superior

    Science.gov (United States)

    Fisher, Timothy G.; Krantz, David E.; Castaneda, Mario R.; Loope, Walter L.; Jol, Harry M.; Goble, Ronald J.; Higley, Melinda C.; DeWald, Samantha; Hansen, Paul

    2014-01-01

    Sand Point is a small cuspate foreland located along the southeastern shore of Lake Superior within Pictured Rocks National Lakeshore near Munising, Michigan. Park managers’ concerns for the integrity of historic buildings at the northern periphery of the point during the rising lake levels in the mid-1980s greatly elevated the priority of research into the geomorphic history and age of Sand Point. To pursue this priority, we recovered sediment cores from four ponds on Sand Point, assessed subsurface stratigraphy onshore and offshore using geophysical techniques, and interpreted the chronology of events using radiocarbon and luminescence dating. Sand Point formed at the southwest edge of a subaqueous platform whose base is probably constructed of glacial diamicton and outwash. During the post-glacial Nipissing Transgression, the base was mantled with sand derived from erosion of adjacent sandstone cliffs. An aerial photograph time sequence, 1939–present, shows that the periphery of the platform has evolved considerably during historical time, infl uenced by transport of sediment into adjacent South Bay. Shallow seismic refl ections suggest slump blocks along the leading edge of the platform. Light detection and ranging (LiDAR) and shallow seismic refl ections to the northwest of the platform reveal large sand waves within a deep (12 m) channel produced by currents fl owing episodically to the northeast into Lake Superior. Ground-penetrating radar profi les show transport and deposition of sand across the upper surface of the platform. Basal radiocarbon dates from ponds between subaerial beach ridges range in age from 540 to 910 cal yr B.P., suggesting that Sand Point became emergent during the last ~1000 years, upon the separation of Lake Superior from Lakes Huron and Michigan. However, optically stimulated luminescence (OSL) ages from the beach ridges were two to three times as old as the radiocarbon ages, implying that emergence of Sand Point may have begun

  10. Complexity confers stability: Climate variability, vegetation response and sand transport on longitudinal sand dunes in Australia's deserts

    Science.gov (United States)

    Hesse, Paul P.; Telfer, Matt W.; Farebrother, Will

    2017-04-01

    The relationship between antecedent precipitation, vegetation cover and sand movement on sand dunes in the Simpson and Strzelecki Deserts was investigated by repeated (up to four) surveys of dune crest plots (≈25 × 25 m) over a drought cycle (2002-2012) in both winter (low wind) and spring (high wind). Vegetation varied dramatically between surveys on vegetated and active dune crests. Indices of sand movement had significant correlations with vegetation cover: the depth of loose sand has a strong inverse relationship with crust (cyanobacterial and/or physical) while the area covered by ripples has a strong inverse relationship with the areal cover of vascular plants. However, the relationship between antecedent rainfall and vegetation cover was found to be complex. We tentatively identify two thresholds; (1) >10 mm of rainfall in the preceding 90 days leads to rapid and near total cover of crust and/or small plants 400 mm of rainfall in the preceding three years leads to higher cover of persistent and longer-lived plants >50 cm tall. These thresholds were used to predict days of low vegetation cover on dune crests. The combination of seasonality of predicted bare-crest days, potential sand drift and resultant sand drift direction explains observed patterns of sand drift on these dunes. The complex vegetation and highly variable rainfall regime confer meta-stability on the dunes through the range of responses to different intervals of antecedent rainfall and non-linear growth responses. This suggests that the geomorphic response of dunes to climate variation is complex and non-linear.

  11. Mobility of functionalized quantum dots and a model polystyrene nanoparticle in saturated quartz sand and loamy sand.

    Science.gov (United States)

    Quevedo, Ivan R; Tufenkji, Nathalie

    2012-04-17

    Quantum dots (QDs) are one example of engineered nanoparticles (ENPs) with demonstrated toxic effects. Yet, little is known about the behavior of QDs in the natural environment. This study assessed the transport of two commercial carboxylated QDs (CdTe and CdSe) and carboxylated polystyrene latex (nPL) as a model nanoparticle using saturated laboratory-scale columns. The influence of solution ionic strength (IS) and cation type (K(+) or Ca(2+)) on the transport potential of these ENPs was examined in two granular matrices - quartz sand and loamy sand. The retention of all three particles was generally low in the quartz sand columns within the range of studied IS (0.1-100 mM) for the monovalent salt (KCl). In contrast, the retention of the three ENPs in the quartz sand was significant in the presence of 10 mM Ca(2+). Moreover, ENP attachment efficiencies (α) were enhanced by at least 1 order of magnitude in columns packed with loamy sand (for IS between 0.1-10 mM KCl). Although all three ENPs used here are carboxylated, they differ in the type of surface coating (e.g., choice of polymers or polyelectrolytes). Regardless of the surface coatings, the three ENPs exhibit comparable mobility in the quartz sand. However, the ENPs demonstrate variable transport potential in loamy sand suggesting that differences in the binding affinities of surface-modified ENPs for specific soil constituents can play a key role in the fate of ENPs in soils.

  12. Analysis of aridity indicators in the Deliblato Sands

    Directory of Open Access Journals (Sweden)

    Kadović Ratko

    2014-01-01

    Full Text Available Deliblato Sands are located in the southern part of Banat region in Vojvodina province. According to the estimated changes of basic climate parameters in this part of the Republic of Serbia during past decades very strong rise in annual air temperatures (T was registered, an average of 0.52°C per decade. This rise in temperature increased the potential evapotranspiration (PET, which together with precipitation can increase the degree of aridity of climate in the study area. However, in the same period an increase in annual precipitation sum (P was observed, an average of about 35 mm per decade, which may somewhat slow the aridisation of desert sands. Considering the nature, origin and significance of Deliblato Sands ecosystem, the main goal of this paper is to analyse the drought and aridity index (AI = P / PET, analyse the trend of aridisation process and its possible impact on ecosystems of this special nature reserve. Aridity index analyses were performed in meteorological stations Banatski Karlovac, Vrsac and Bela Crkva for the period 1981 - 2010 at the annual values and for the growing season. Results showed that Deliblato desert sands (Banatski Karlovac stand at a higher frequency of arid years (AI < 0.65 compared to locations of Vrsac and Bela Crkva. On the other hand, the level of aridity has considerably increased during the vegetation period in desert sands as well in its surroundings. This intensified aridity is the result of considerable increase of potential evapotranspiration (PET connected to season precipitation.

  13. Estimation of Sand Production Rate Using Geomechanical and Hydromechanical Models

    Directory of Open Access Journals (Sweden)

    Son Tung Pham

    2017-01-01

    Full Text Available This paper aims to develop a numerical model that can be used in sand control during production phase of an oil and gas well. The model is able to predict not only the onset of sand production using critical bottom hole pressure inferred from geomechanical modelling, but also the mass of sand produced versus time as well as the change of porosity versus space and time using hydromechanical modelling. A detailed workflow of the modelling was presented with each step of calculations. The empirical parameters were calibrated using laboratory data. Then the modelling was applied in a case study of an oilfield in Cuu Long basin. In addition, a sensitivity study of the effect of drawdown pressure was presented in this paper. Moreover, a comparison between results of different hydromechanical models was also addressed. The outcome of this paper demonstrated the possibility of modelling the sand production mass in real cases, opening a new approach in sand control in petroleum industry.

  14. Gouging abrasion resistance of materials for oil sands service

    Energy Technology Data Exchange (ETDEWEB)

    Llewellyn, R.J. [National Research Council of Canada, Vancouver, BC (Canada); Tolfree, D.J.; Hall, R.A. [British Columbia Univ., Vancouver, BC (Canada). Dept. of Mining and Mineral Process Engineering; Liang, P. [British Columbia Univ., Vancouver, BC (Canada). Dept. of Metals and Materials Engineering

    2004-07-01

    Hydraulic ore transportation in the oil sands industry has brought about a need for effective and reliable crusher and classifying systems to pulverize, screen and handle mined frozen oil sands lumps and large solids before they get slurried and pipelined to bitumen extraction plants. Improved product development, assessment methods for materials for oil sands applications have generally focused on low and high stress abrasion and slurry erosion resistance because these wear mechanisms are considered to predominate in oil sands mining, transportation and bitumen recovery. With the increased use of crusher and slurry handling systems, materials of construction are required to have good toughness and gouging abrasion properties to withstand impact and ploughing forces. Tests of gouging abrasion were conducted using a modified ASTM G81 procedure on a range of materials associated with oil sands processing. The objective was to assess material property requirements for mitigating these conditions. The wear losses that occurred for reference wear plates were compared to feed rock that was pulverized in a laboratory jaw crusher. The classes of evaluated materials were abrasion resistant (AR) steel plates, austenitic manganese steel castings, chromium and chromium molybdenum white irons (as plain castings and in laminated forms), and chromium carbide and tungsten carbide overlaid wear plates. 8 refs., 1 tab., 11 figs.

  15. Modeling and Optimization of Phenol Formaldehyde Resin Sand Mould System

    Directory of Open Access Journals (Sweden)

    Chate G. R.

    2017-06-01

    Full Text Available Chemical bonded resin sand mould system has high dimensional accuracy, surface finish and sand mould properties compared to green sand mould system. The mould cavity prepared under chemical bonded sand mould system must produce sufficient permeability and hardness to withstand sand drop while pouring molten metal through ladle. The demand for improved values of permeability and mould hardness depends on systematic study and analysis of influencing variables namely grain fineness number, setting time, percent of resin and hardener. Try-error experiment methods and analysis were considered impractical in actual foundry practice due to the associated cost. Experimental matrices of central composite design allow conducting minimum experiments that provide complete insight of the process. Statistical significance of influencing variables and their interaction were determined to control the process. Analysis of variance (ANOVA test was conducted to validate the model statistically. Mathematical equation was derived separately for mould hardness and permeability, which are expressed as a non-linear function of input variables based on the collected experimental input-output data. The developed model prediction accuracy for practical usefulness was tested with 10 random experimental conditions. The decision variables for higher mould hardness and permeability were determined using desirability function approach. The prediction results were found to be consistent with experimental values.

  16. Seed Mucilage Improves Seedling Emergence of a Sand Desert Shrub

    Science.gov (United States)

    Yang, Xuejun; Baskin, Carol C.; Baskin, Jerry M.; Liu, Guangzheng; Huang, Zhenying

    2012-01-01

    The success of seedling establishment of desert plants is determined by seedling emergence response to an unpredictable precipitation regime. Sand burial is a crucial and frequent environmental stress that impacts seedling establishment on sand dunes. However, little is known about the ecological role of seed mucilage in seedling emergence in arid sandy environments. We hypothesized that seed mucilage enhances seedling emergence in a low precipitation regime and under conditions of sand burial. In a greenhouse experiment, two types of Artemisia sphaerocephala achenes (intact and demucilaged) were exposed to different combinations of burial depth (0, 5, 10, 20, 40 and 60 mm) and irrigation regimes (low, medium and high, which simulated the precipitation amount and frequency in May, June and July in the natural habitat, respectively). Seedling emergence increased with increasing irrigation. It was highest at 5 mm sand burial depth and ceased at burial depths greater than 20 mm in all irrigation regimes. Mucilage significantly enhanced seedling emergence at 0, 5 and 10 mm burial depths in low irrigation, at 0 and 5 mm burial depths in medium irrigation and at 0 and 10 mm burial depths in high irrigation. Seed mucilage also reduced seedling mortality at the shallow sand burial depths. Moreover, mucilage significantly affected seedling emergence time and quiescence and dormancy percentages. Our findings suggest that seed mucilage plays an ecologically important role in successful seedling establishment of A. sphaerocephala by improving seedling emergence and reducing seedling mortality in stressful habitats of the sandy desert environment. PMID:22511952

  17. Geophysical applications for oil sand mine tailings management

    Energy Technology Data Exchange (ETDEWEB)

    Parker, D.; Bauman, P. [WorleyParsons, Calgary, AB (Canada)

    2009-07-01

    Geophysical techniques are applied throughout a mine's life cycle to facilitate siting, constructing and monitoring of tailings dumps and ponds. This presentation described 3 case studies from the Athabasca region in northeast Alberta that demonstrated some of the concerns associated with oil sand mine tailings, and the information that geophysical surveys can provide. The objectives of these studies were to determine the lateral and depth extents of elevated conductivities of soil and groundwater that have high salt concentration from the tailings sand pore fluid. Due to high chloride concentrations within the tailings material, salt within the root zone may affect vegetation. A terrain conductivity survey was designed to map the lateral extents of salinity impact, while an electrical resistivity tomography (ERT) survey was used to delineate the tailings sand leachate at depth. The proper management of oil sand tailings facilities is vital to the life cycle of a mine. It was concluded that geophysical techniques can be instrumental in managing several engineering and environmental challenges, from Pleistocene channel mapping, to tailings pond settling characteristics, to reclaiming tailings sands. 1 ref., 7 figs.

  18. Geophysics comes of age in oil sands development

    Energy Technology Data Exchange (ETDEWEB)

    Bauman, P. [WorleyParsons Komex, Calgary, AB (Canada); Birch, R.; Parker, D.; Andrews, B. [Calgary Univ., AB (Canada). Dept. of Geology and Geophysics

    2008-07-01

    This paper discussed geophysical techniques developed for oil sands exploration and production applications in Alberta's oil sands region. Geophysical methods are playing an important role in mine planning, tailings containment, water supply, and land reclamation activities. Geophysics techniques are used to estimate the volume of muskeg that needs to be stripped and stored for future reclamation activities as well as to site muskeg piles and delineate the thickness of clay Clearwater formations overlying Cretaceous oil-bearing sands. 2-D electrical resistivity mapping is used to map river-connected deep bedrock Pleistocene paleovalleys in the region. Geophysical studies are also used to investigate the interiors of dikes and berms as well as to monitor salt migration within tailings piles. Sonic and density logs are used to create synthetic seismograms for mapping the Devonian surface in the region. The new applications included the calculation of bitumen saturation from surface sands and shales; muskeg thickness mapping; and non-intrusive monitoring of leachate plumes. Geophysical techniques included 2-D electrical resistivity imaging; transient electromagnetic (EM) technologies; ground penetrating radar; and high-resolution seismic reflections. Polarization, surface nuclear magnetic resonance and push-probe sensing techniques were also discussed. Techniques were discussed in relation to Alberta's Athabasca oil sands deposits. 4 refs.

  19. Effect of substrate size on sympatric sand darter benthic habitat preferences

    Science.gov (United States)

    Thompson, Patricia A.; Welsh, Stuart A.; Rizzo, Austin A.; Smith, Dustin M.

    2017-01-01

    The western sand darter, Ammocrypta clara, and the eastern sand darter, A. pellucida, are sand-dwelling fishes that have undergone range-wide population declines, presumably owing to habitat loss. Habitat use studies have been conducted for the eastern sand darter, but literature on the western sand darter remains sparse. To evaluate substrate selection and preference, western and eastern sand darters were collected from the Elk River, West Virginia, one of the few remaining rivers where both species occur sympatrically. In the laboratory, individuals were given the choice to bury into five equally available and randomly positioned substrates ranging from fine sand to granule gravel (0.12–4.0 mm). The western sand darter selected for coarse and medium sand, while the eastern sand darter was more of a generalist selecting for fine, medium, and coarse sand. Substrate selection was significantly different (p = 0.02) between species in the same environment, where the western sand darter preferred coarser substrate more often compared to the eastern sand darter. Habitat degradation is often a limiting factor for many species of rare freshwater fish, and results from this study suggest that western and eastern sand darters may respond differently to variations in benthic substrate composition.

  20. Experimental investigation on heat transport in gravel-sand materials

    DEFF Research Database (Denmark)

    Maureschat, Gerald; Heller, Alfred

    1997-01-01

    The project is a basic study on the expected thermal behaviour of gravel storage initiated as a part of a research and demonstration gravel storage for seasonal heat storage.The goal of the investigation is to determine the heat transfer between heat pipes and sand-gravel storage media by carrying...... out in a small size experiment. The experiment consists of a highly insulated box filled with two kinds of sand material crossed by a plastic heat pipe. Heat transfer is measured under dry and water satured conditions in a cross-section.The conclusions are clear. To obtain necessary heat conduction...... in sand-gravel material, the storage media is to be water satured. In this case, handling of such material on site is rather complex. The conduction is highly dependent on the thermal properties of the storage media and so is the overall thermal performance of a storage applying such media. For sandy...

  1. Blown by wind: nonlinear dynamics of aeolian sand ripples

    Science.gov (United States)

    Yizhaq, Hezi; J. Balmforth, Neil; Provenzale, Antonello

    2004-08-01

    A nonlinear continuum model is considered that describes the dynamics of two-dimensional aeolian sand ripples. This integro-differential model is based on a phenomenological approach due to Anderson. Linear stability analysis using this model shows that a flat sand bed exposed to the action of wind is linearly unstable to long-wavelength perturbations. As the ripples grow, nonlinear effects become important, ripples become asymmetric and the wavelength increases due to merging events. A long-wavelength approximation to the full integral model is then derived. The ripple field produced by the long-wave theory undergoes coarsening, drifts downwind and displays bifurcations and defects which move from one ripple to another, similar to what is observed for sand ripples in the desert.

  2. Laboratory investigations of effective flow behavior in unsaturated heterogeneous sands

    DEFF Research Database (Denmark)

    Wildenschild, Dorthe; Høgh Jensen, Karsten

    1999-01-01

    Two-dimensional unsaturated flow and transport through heterogeneous sand was investigated under controlled laboratory conditions. The unsaturated hydraulic conductivity of five homogeneous sands and three heterogeneous systems composed of these five sands was measured using a steady state flux...... such that on the average a uniform pressure profile was established and gravity flow applied. Solute breakthrough curves measured at discrete points in the tank using time domain reflectometry, as well as dye tracer paths, showed that flow and transport took place in a very tortuous pattern where several grid cells were...... completely bypassed. The degree of tortuosity appeared to be dependent on the degree of saturation, as the tortuosity increased with decreasing saturation. Despite the tortuous flow patterns, we found that the effective unsaturated hydraulic conductivity as well as the retention curves for the three...

  3. AE Test of Calcareous Sands with Particle Rushing

    Directory of Open Access Journals (Sweden)

    Tan Fengyi

    2017-08-01

    Full Text Available The particle of calcareous sands was forced to crush, then the energy from the crushing was released by the form of sound waves. Therefore the AE technique was used to detect the calcareous sands AE signal when it crushed. by to study the AE characteristics, the mechanics of calcareous sands was studied. Study showed that: (1 there was the AE activities on the low confining pressure condition at the beginnig of test, (2 there was more and more AE activities with the continuing of test until to the end, (3 the calcareous sands’ AE activities was on the whole testing, (4 the calcareous sands’ particle crushing and mutual friction played different roles for its AE activities. Then the AE model based on the calcarous sands’ particle crushing was discussed.

  4. Geologic map of Great Sand Dunes National Park, Colorado

    Science.gov (United States)

    Madole, Richard F.; VanSistine, D. Paco; Romig, Joseph H.

    2016-10-20

    Geologic mapping was begun after a range fire swept the area of what is now the Great Sand Dunes National Park in April 2000. The park spans an area of 437 square kilometers (or about 169 square miles), of which 98 percent is blanketed by sediment of Quaternary age, the Holocene and Pleistocene Epochs; hence, this geologic map of the Great Sand Dunes National Park is essentially a surficial geologic map. These surficial deposits are diverse and include sediment of eolian (windblown), alluvial (stream and sheetwash), palustrine (wetlands and marshes), lacustrine (lake), and mass-wasting (landslides) origin. Sediment of middle and late Holocene age, from about 8,000 years ago to the present, covers about 80 percent of the park.Fluctuations in groundwater level during Holocene time caused wetlands on the nearby lowland that bounds the park on the west to alternately expand and contract. These fluctuations controlled the stability or instability of eolian sand deposits on the downwind (eastern) side of the lowland. When groundwater level rose, playas became lakes, and wet or marshy areas formed in many places. When the water table rose, spring-fed streams filled their channels and valley floors with sediment. Conversely, when groundwater level fell, spring-fed streams incised their valley floors, and lakes, ponds, and marshes dried up and became sources of windblown sand.Discharge in streams draining the west flank of the Sangre de Cristo Range is controlled primarily by snowmelt and flow is perennial until it reaches the mountain front, beyond which streams begin losing water at a high rate as the water soaks into the creek beds. Even streams originating in the larger drainage basins, such as Sand and Medano Creeks, generally do not extend much more than 4 km (about 2.5 miles) beyond where they exit the mountains.The Great Sand Dunes contain the tallest dunes (maximum height about 750 feet, or 230 m) in North America. These dunes cover an area of 72 square kilometers

  5. Enhanced microbubbles assisted cleaning of diesel contaminated sand.

    Science.gov (United States)

    Agarwal, Ashutosh; Liu, Yu

    2017-11-15

    In this article, we investigated the effect of low intensity pulsed ultrasound (US), temperature and salinity on cleaning efficacy of fine bubbles with diameter diesel contaminated sands. About 47% and 76% diesel removal was achieved from 10% (w/w) diesel contaminated fine and medium sands respectively, after 30min treatment with 40kHz low intensity intermittent pulsed US together with MBs in contrast to 41% and 68% diesel removal while treatment with MBs alone. The effect of high temperature was found to be prominent during the initial stages of cleaning. In addition, MBs generated in 599mM saline water efficiently removed 85% diesel from fine sand within 30min in contrast to only 41% diesel removal with MBs in fresh water. This study provides evidence for developing highly efficient MBs based chemical free technology for diesel contaminated sediments. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Study on sand particles creep model and open pit mine landslide mechanism caused by sand fatigue liquefaction

    Science.gov (United States)

    Du, Dong-Ning; Wang, Lai-Gui; Zhang, Xiang-Dong; Zhang, Shu-Kun

    2017-06-01

    The sand particles in the sand - rock composite slope of the open pit mine occurs creep deformation and fatigue liquefaction under the action of vehicle load vibration and hydraulic gradient, which causes landslide geological disasters and it destroys the surface environment. To reveal the mechanism, a mechanics model based on the model considering the soil structural change with a new “plastic hinge” element is developed, to improve its constitutive and creep curve equations. Data from sand creep experiments are used to identify the parameters in the model and to validate the model. The results show that the mechanical model can describe the rotation progress between the sand particles, disclose the negative acceleration creep deformation stage during the third phase, and require fewer parameters while maintaining accuracy. It provides a new creep model considering rotation to analyze sand creep mechanism, which provides a theoretical basis for revealing the open pit mine landslide mechanism induced by creep deformation and fatigue liquefaction of sandy soil.

  7. Analysis of the environmental control technology for tar sand development

    Energy Technology Data Exchange (ETDEWEB)

    de Nevers, N.; Glenne, B.; Bryner, C.

    1979-06-01

    The environmental technology for control of air pollution, water pollution, and for the disposal, stabilization, and vegetation of the waste tar sand were thoroughly investigated. Although some difficulties may be encountered in any of these undertakings, it seems clear that the air and water pollution problems can be solved to meet any applicable standard. Currently there are two large-scale plants producing liquid fuels from tar sands in Alberta, Canada which use similar technology involving surface mining, hot water extraction, and surface disposal of waste sand. These projects all meet the Canadian environmental control regulations in force at the time they began. The largest US deposits of tar sands are much smaller than the Canadian; 95 percent are located in the state of Utah. Their economics do not appear as attractive as the Canadian deposits. The environmental control costs are not large enough to make an otherwise economic project uneconomic. The most serious environmental conflict likely to occur over the recovery of liquid fuels from the US deposits of tar sands is that caused by the proximity of the deposits to national parks, national monuments, and a national recreation area in Utah. These areas have very stringent air pollution requirements; and even if the air pollution control requirements can be met, there may still be adequate opposition to large-scale mining ventures in these areas to prevent their commercial exploitation. Another environmental constraint may be water rights availability.Essentially all of the water running in the Colorado river basin is now legally allocated. Barring new interpretations of the legality of water rights purchase, Utah tar sands developments should be able to obtain water by purchasing existing irrigation water rights.

  8. Characterization of Beach/River Sand for Foundry Application

    Directory of Open Access Journals (Sweden)

    Katsina Christopher BALA

    2013-11-01

    Full Text Available A detailed experimental investigation is been reported on the characterization of beach/river sand for foundry use. Bulk properties of the sand samples collected were evaluated. The experimental results were analyzed as per the American Foundry Society (AFS standard. The analyses show that samples from Ughelli River, Warri River and Ethiope River could be used effectively in the foundry. The sample from Lagos bar beach requires to be sieved properly to remove the coarse fractions in order to make it suitable for foundry use.

  9. Thermoluminescence dating of sand dunes in Rajasthan, India

    Science.gov (United States)

    Singhvi, A. K.; Sharma, Y. P.; Agrawal, D. P.

    1982-01-01

    We report here a new application of thermoluminescence (TL) for dating sand dunes. This application assumes that exposure to sunlight causes bleaching of the geological TL of a sediment to a residual value and that TL accumulation starts again when the sediment is buried under fresh deposit and is thus shielded from the Sun. Although the TL method has been applied to loess1,2 and ocean sediments3,4, the application of this technique to sand dunes provides the first reliable dating control for dune dynamics, palaeoclimatology and spread of deserts.

  10. Heat-insulating moulding sand with the glycol addition

    Directory of Open Access Journals (Sweden)

    M. Cholewa

    2011-07-01

    Full Text Available The article presents a selection of the composition and basic properties of highly insulating moulding sand. Sandmix is designed especially for thin-walled castings with high tendency to oxidation - particularly in spatial cores skeleton castings. An example of matrix of sandmix are aluminosilicate microspheres and the binder is bentonite plasticized with water and polyglycol. By using the microspheres high insulation, high mechanical strength and low specific weight core sand was obtained. Addition of polyglycol improved the mechanical properties, deformation characteristics, surface smoothness and reduced friability of sandmix.

  11. Pneumatic moulding sand reclamation in the linear regenerator system

    Directory of Open Access Journals (Sweden)

    H. Szlumczyk

    2007-04-01

    Full Text Available This article covers the analysis of the pneumatic moulding sand reclamation, made of different types of binders. The research has been carried out for the sand with resin binder (phenolic – formaldehyde and furan resins as well as water glass (hardened with flodur and arconite hardener. Reclamation has been carried in the pneumatic conveying system in the linear regenerator in the technical scale. Evaluation of the effectiveness of the reclamation has been made on the basis of tests determining the contents of binder's components before and after the process and on the basis of the sieve analysis.

  12. Canadian Oil Sands Investments: FOCUS on a Controversial Energy Source

    OpenAIRE

    Palombizio, Ennio A.; Borchert, Jan Moritz

    2009-01-01

    Rising energy demand and prices, particularly for oil, has led to a search for solutions to quell this increase. With the advent of the Oil Sands, we have stumbled upon an opportunity to increase Oil supplies and thus stabilize prices and satisfy demand. A large portion of the oil sands are located in Canada and this gives Canada an opportunity to improve its economy. Since the discovery, Canada has seen a vast influx in investment for the purpose of extracting these oil deposits. Using the U...

  13. Laterally cyclic loading of monopile in dense sand

    DEFF Research Database (Denmark)

    Klinkvort, Rasmus Tofte; Hededal, Ole; Svensson, M.

    2011-01-01

    the loading conditions. In these tests the load conditions are controlled by two load characteristics, one controlling the level of the cyclic loading and one controlling the characteristic of the cyclic loading. The centrifuge tests were performed in dense dry sand on a pile with prototype dimensions...... used for wind turbine foundation. This is important in order to get the right failure mechanism in the sand. The load frame is controlled with a feedback system which enables force controlled load series. A total number of 8 tests have been carried. In all of the tests, the pile was loaded with 500...

  14. Engineering knowledge requirements for sand and dust on Mars

    Science.gov (United States)

    Kaplan, D. I.

    1991-01-01

    The successful landing of human beings on Mars and the establishment of a permanent outpost there will require an understanding of the Martian environment by the engineers. A key feature of the Martian environment is the nearly ubiquitous presence of sand and dust. The process which the engineering community will undertake to determine the sensitivities of their designs to the current level of knowledge about Mars sand and dust is emphasized. The interaction of the engineering community with the space exploration initiative (SEI) mission planners and management is described.

  15. Effectiveness of Protective Action of Coatings from Moisture Sorption into Surface Layer of Sand Moulds

    Directory of Open Access Journals (Sweden)

    Kaźnica N.

    2016-12-01

    Full Text Available The results of investigations of the sorption process of surface layers of sand moulds covered by zirconium and zirconium - graphite alcohol coatings are presented in the paper. Investigations comprised two kinds of sand grains (silica sand and reclaimed sand of moulding sand with furan resin. Tests were performed under conditions of a high relative air humidity 75 - 85% and a constant temperature within the range 28 – 33°C. To evaluate the effectiveness of coatings protective action from moisture penetration into surface layers of sand moulds gravimetric method of quantitavie moisture sorption and ultrasonic method were applied in measurements.

  16. Sandstone to frac sand: an innovative approach to sourcing high-value sand in NE British Columbia

    Energy Technology Data Exchange (ETDEWEB)

    Broughton, Scott; Chambers, Bob [Stikine Energy Corp (Canada)

    2011-07-01

    With the depletion of conventional energy resources and the rising energy demand, the shale gas industry is growing. In British Columbia, the Horn River Basin, Liard Basin and Montney Basin are large shale plays which are attracting billions of investment dollars. Important volumes of frac sand are required for the development of those plays and the aim of this paper is to present the study carried out by Strikine to find local sources of raw materials which could be transformed in frac sands. The company has located significant quantities of quartz pure sandstones in northeast British Columbia, a pilot trial showed good performance and two projects are under development in the heart of British Columbia's major gas plays. With these projects Strikine will gain a cost advantage over the other frac sand producers due to the proximity of its quartz pure sandstone projects to growing markets.

  17. A new sand-wedge-forming mechanism in an extra-arid area

    Science.gov (United States)

    Li, Hongshou; Wang, Wanfu; Wu, Fasi; Zhan, Hongtao; Zhang, Guobing; Qiu, Fei

    2014-04-01

    A survey found that sand wedges are widely distributed in the extremely extra-arid Gobi region of Dunhuang, China. The sand wedges are still developing. Well-developed sand wedges are surrounded by polygonal areas showing fractal structures. The depth of a well-developed sand wedge is 50-60 cm and its maximum width is 50-60 cm, so the depth/width ratio is 1.0. The interface between the wedge and matrix is arc-shaped. The mechanical composition of the sand wedges compared to the matrix is such that 76.72% of the particles have diameters ≤ 0.25 mm and show vertical sand laminations in the sand wedge, while 55.19% of the particles in the matrix are ≥ 2.00 mm in diameter. The particle diameters are consistent with the width of the sand-wedge fractures. The salt content in the sand wedges is 3.13 g/kg, while that of the matrix is 40.86 g/kg. The large salinity difference shows that the sand in the wedges comes from drift sand or cladding layers where salinity is lower, and that the sand wedge was formed in an arid climate. Displacement and pressure are closely associated with the daily temperature variation; they fluctuate significantly following the temperature. Measurements reveal the movement of thermal-contraction fissures. Pressure monitoring identified that wet expansions occurred after rainfall, which made the sand wedges become tightly joined to the matrix. Following this, as the soil became desiccated and shrank, a crack opened in the middle of the sand wedge. This was then filled with drift sand. With the next rainfall, the system moved into another development cycle. The current article reveals a new mechanism for forming sand wedges in extra-arid conditions. Arid sand wedges are a unique drought-induced surface landmark resulting from long-term, natural, dry-climate processes.

  18. Introduction: The Shifting Sands of Natural Resource Management ...

    African Journals Online (AJOL)

    Introduction: The Shifting Sands of Natural Resource Management in Zimbabwe. E Manzungu. Abstract. No Abstract. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors ...

  19. Characterizing volumetric deformation behavior of naturally occuring bituminous sand materials

    CSIR Research Space (South Africa)

    Anochie-Boateng, Joseph

    2009-05-01

    Full Text Available on the test results, bulk modulus properties were characterized as a function of the applied hydrostatic stress for individual oil sand samples. When the entire test data were combined, nonlinear bulk modulus models were successfully developed to account...

  20. Identification Odor Compounds Emitted During the Heating of Molding Sands

    Directory of Open Access Journals (Sweden)

    Faber J.

    2017-06-01

    Full Text Available The paper presents the results of analyzes of gases emitted during exposure to high temperature foundry molding sands, where binders are organic resins. As a research tool has been used special gas chromatograph designed to identify odorous compounds including the group of alkanes.

  1. Community Based Governance of Wetlands in the Sand River ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    South Africa). The community of Craigieburn in KwaZulu-Natal, South Africa, is located on a 1 200-ha wetland that plays an important role in the regulation and maintenance of the Sand River. The situation in Craigieburn is representative of the ...

  2. The Delft Sand, Clay & Rock Cutting Model. Family Edition.

    NARCIS (Netherlands)

    Miedema, S.A.

    2015-01-01

    In dredging, trenching, (deep sea) mining, drilling, tunnel boring and many other applications, sand, clay or rock has to be excavated. The productions (and thus the dimensions) of the excavating equipment range from mm3/sec - cm3/sec to m3/sec. In oil drilling layers with a thickness of a magnitude

  3. The Delft Sand, Clay and Rock Cutting Model

    NARCIS (Netherlands)

    Miedema, S.A.

    2014-01-01

    Sand, clay and rock have to be excavated for a variety of purposes, such as dredging, trenching, mining (including deep sea mining), drilling, tunnel boring and many other applications. Many excavations take place on dry land, but they are also frequently required in completely saturated conditions,

  4. Beach Sand Supply and Transport at Kunduchi in Tanzania and ...

    African Journals Online (AJOL)

    Abstract—Beach-head erosion of sandy beach plains in eastern Africa threatens tourism-related infrastructure and the livelihoods of beach users. The nature and drivers of physical shoreline change at Kunduchi, Dar es Salaam, and Bamburi,. Mombasa, are described with analyses of beach sand transport through the ...

  5. Identifying and dating buried micropodzols in Subatlantic polycyclic drift sands

    NARCIS (Netherlands)

    Wallinga, J.; Mourik, van J.M.; Schilder, M.L.M.

    2013-01-01

    Polycyclic soil sequences provide valuable archives of alternating unstable periods (sand drifting) and stable periods (soil formation) in NW-European coversand landscapes during the Subatlantic. Here we study six polycyclic soil sequences at the Weerterbergen (The Netherlands) to investigate how to

  6. groundwater resources of nanka sands aquifers around nanka-oko ...

    African Journals Online (AJOL)

    O. V. Omonona, Department of Physic/Geology/Geophysics, Federal University, Ndufu Alike, Ikwo, Nigeria. B. C. Ozobialu ..... the Anambra Basin. The geology as revealed by the logs is characterized with upper reddish to brown ferruginised sands underlain by coarse to fine grained ... the central and southern sections.

  7. Grain size dependency in the occurrence of sand waves

    NARCIS (Netherlands)

    van der Veen, Henriëtte; Hulscher, Suzanne J.M.H.; Knaapen, Michiel

    2006-01-01

    Sandy shallow seas, like the North Sea, are very dynamic. Several morphological features are present on the bed, from small ripples to sand waves and large tidal sandbanks. The larger patterns induce significant depth variations that have an impact on human activities taking place in this area.

  8. Production of fish finger from sand smelt ( Atherina boyeri , RISSO ...

    African Journals Online (AJOL)

    In this study, changes of chemical, microbiological load and sensory properties of fish fingers prepared from sand smelt (Atherina boyeri, RISSO 1810) were investigated during storage (for 6 months at -18°C). The fish finger nutritional composition changed with the fish finger process. The changes in moisture, crude protein, ...

  9. Sand fly evolution and its relationship to Leishmania transmission

    Directory of Open Access Journals (Sweden)

    PD Ready

    2000-08-01

    Full Text Available The evolutionary relationships of sand flies and Leishmania are discussed in this report, which draws distinctions between co-association, co-evolution and co-speciation (or co-cladogenesis. Examples focus on Phlebotomus vectors of Le. infantum and Le. major in the Mediterranean subregion.

  10. Application of sand and geotextile envelope in subsurface drip ...

    African Journals Online (AJOL)

    TUOYO

    2010-08-09

    Aug 9, 2010 ... Application of sand and geotextile envelope in subsurface drip irrigation. P. Najafi* and S. H. Tabatabaei. 1Islamic Azad University, Khorasgan Branch, P.O. 81595-158, Isfahan, Iran. 2Department of Water Engineering, Faculty of Agriculture, Shahrekord University, Shahrekord, Iran. Accepted 7 June, 2010.

  11. Erosion/corrosion testing of materials for oil sands applications

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, G.; Wolodko, J.; Alemaskin, K.; Been, J.; Danysh, M. [Alberta Research Council, Edmonton, AB (Canada)

    2008-07-01

    Erosion and corrosion are common wear mechanisms for components used in oil sands processing facilities. This paper described a slurry jet test apparatus designed to evaluate and assess materials for oil sands service conditions. The jet testing apparatus was designed to mimic the wet erosion phenomena typically found in oil sands applications. Wear- and corrosion-resistant materials tested by the apparatus included carbon steel, tungsten carbide metal matrix composite (WC-MMC) overlays, and a range of polymer and rubber liner materials. Polymeric materials included hydrogenated nitrile rubber (HNBR); polyurethane elastomer; and high density polyethylene (HDPE). Material losses were determined by measuring the mass of the samples before and after testing. Normalized rates of abrasion were calculated by dividing total mass lost in the specimens by the total mass of sand impinged on the sample surface. Samples were also visually assessed and analyzed using scanning electron microscopy (SEM) in order to determine failure modes. Tests were conducted for a 2-hour period at an impingement angle of 90 degrees. Results of the study showed that the average abrasion rates of the polymeric samples are lower than rates seen with the carbon steel and overlay materials. Future work on the apparatus will include testing the materials under varying slurry jet parameters. 15 refs., 5 tabs., 10 figs.

  12. Tar sands : dirty oil and the future of a continent

    Energy Technology Data Exchange (ETDEWEB)

    Nikiforuk, A.

    2008-07-01

    This book exposes the environmental, social and political costs of oil sands development in Alberta's Athabasca Deposit. It argues that the earth-destroying production methods of bitumen cost nearly 20 times more than conventional crude to produce and upgrade. Most of the tar sands lie in such deep formations that bitumen must be steamed out of the ground using an array of pumps, pipes and horizontal wells. Steam assisted gravity drainage (SAGD), which is the most popular in situ technology used to recover oil sands can have detrimental effects on the boreal forests, wildlife and their habitat. The book emphasized the high greenhouse gas emissions, high energy consumption and suspected health problems associated with oil sands development. It also highlighted the industry's poor record on reclamation. Although some industry players have taken measures to reduce water consumption, more will have to be done to treat and reuse water. The author advocates that changes must be made in order to ensure sustainable development. refs., figs.

  13. Shaly gas-sand analysis using hand-carried calculators

    Energy Technology Data Exchange (ETDEWEB)

    Wu, C.H. (Colorado School of Mines, Golden); Krug, J.

    1979-05-01

    A well log evaluation program is presented in this article for shaly-sand cross-plot analysis using either the Hewlett Parkard HP-97 or HP-67 calculator. This program uses analytic methods to compute the effective porosity and shale content from a density (rho/sub b/) and a neutron log porosity (phiN) cross-plot. When hydrocarbon effect is significant, the gamma ray log or spontaneous potential log response is used to compute a shale-corrected, and consequently, hydrocarbon-corrected porosity. First the porosity and shale content are computed, then the water saturation is calculated using the total shale formula. The program has been tested on low permeability (tight) gas-sand analysis and the results are comparable with SARABRAND sand-shale analysis. The accuracy and versatility of the program allows the user to: (1) evaluate shaly formations accurately and quickly in the field and to assist on-site decisions for formation tests and completion; and (2) determine the effect of log parameters on the porosity and saturation calculations or to spot-check SARABRAND results quickly for hydrocarbon-in-place estimates. Furthermore, the program should relieve the user from tedious shaly-sand calculations and allow more time for log quality control and interpretation.

  14. An efficient, self-orienting, vertical-array, sand trap

    Science.gov (United States)

    Hilton, Michael; Nickling, Bill; Wakes, Sarah; Sherman, Douglas; Konlechner, Teresa; Jermy, Mark; Geoghegan, Patrick

    2017-04-01

    There remains a need for an efficient, low-cost, portable, passive sand trap, which can provide estimates of vertical sand flux over topography and within vegetation and which self-orients into the wind. We present a design for a stacked vertical trap that has been modelled (computational fluid dynamics, CFD) and evaluated in the field and in the wind tunnel. The 'swinging' trap orients to within 10° of the flow in the wind tunnel at 8 m s-1, and more rapidly in the field, where natural variability in wind direction accelerates orientation. The CFD analysis indicates flow is steered into the trap during incident wind flow. The trap has a low profile and there is only a small decrease in mass flow rate for multiple traps, poles and rows of poles. The efficiency of the trap was evaluated against an isokinetic sampler and found to be greater than 95%. The centre pole is a key element of the design, minimally decreasing trap efficiency. Finally, field comparisons with the trap of Sherman et al. (2014) yielded comparable estimates of vertical sand flux. The trap described in this paper provides accurate estimates of sand transport in a wide range of field conditions.

  15. Spatial correlation length of normalized cone data in sand

    DEFF Research Database (Denmark)

    Firouzianbandpey, Sarah; Griffiths, D. V.; Ibsen, Lars Bo

    2014-01-01

    The main topic of this study is to assess the anisotropic spatial correlation lengths of a sand layer deposit based on cone penetration testing with pore pressure measurement (CPTu) data. Spatial correlation length can be an important factor in reliability analysis of geotechnical systems, yet...

  16. Petrophysical evaluation of reservoir sand bodies in Kwe Field ...

    African Journals Online (AJOL)

    Reservoir sand bodies in Kwe Field, coastal swamp depobelt, onshore eastern Niger Delta Basin were evaluated from a composite log suite comprising gamma ray, resistivity, density and neutron logs of five (5) wells with core photographs of one (1) reservoir of one well. The aim of the study was to evaluate the ...

  17. Petrophysical Charaterization of the Kwale Field Reservoir Sands ...

    African Journals Online (AJOL)

    Well log data from the deep parts of the six wells located in the Kwale field of the Niger delta basin (OML 60) were used in the determination of some Petrophysical characteristics of the reservoir sands. Well log data were obtained from sonic, gamma-ray, matrix density and resistivity logs. The petrophysical characteristics ...

  18. Sand-mediated divergence between shallow reef communities on ...

    African Journals Online (AJOL)

    Distinctions are rarely made between vertical and horizontal surfaces when assessing reef community composition, yet physical differences are expected because of hydrodynamic differences and sediment accumulation on flat surfaces. As sand often diminishes biotic cover, we hypothesised that vertical surfaces will ...

  19. Aeolian sands as material to construct low-volume roads

    CSIR Research Space (South Africa)

    Paige-Green, P

    2011-07-01

    Full Text Available Aeolian sands are widespread in many semi-arid to arid areas of the world and often provide the only economic source of construction materials for low volume roads. Experience in southern Africa over a number of decades has shown that provided...

  20. Chromian spinel-rich black sands from eastern shoreline of ...

    Indian Academy of Sciences (India)

    Black sands rich in chromian spinel commonly occur in pockets along the eastern shoreline of Andaman Island where various types of peridotites and volcanics belonging to the Andaman ophiolite suite are exposed in close vicinity. The chemistry of these detrital chromian spinels has been extensively used here in ...

  1. Classification of reservoir sand-facies distribution using ...

    African Journals Online (AJOL)

    This study estimated reservoir properties, classified the reservoir sand-facies distribution and identified potential hydrocarbon pay zones. This was with a view to optimizing placements of wells in “Bigola” Field. Conventional interpretation of seismic and well datasets was carried out to provide the sub-surface structures and ...

  2. 1g Model Tests with Foundations in Sand

    DEFF Research Database (Denmark)

    Krabbenhøft, Sven; Damkilde, Lars; Clausen, Johan

    2010-01-01

    This paper presents the results of a series 1g model tests with both a circular and a strip foundation on dense sand. The test results have been compared with the results from finite element calculations based on a non linear Mohr-Coulomb yield criterion taking into account the dependence...

  3. Scoria sand replacement in structural concrete | Tebedge | Zede ...

    African Journals Online (AJOL)

    Scoria is found abundantly in Ethiopia. The use of scoria so far has been limited to highway construction as a base course, as mortal aggregate in masnory con- 1truction and for the production of hollow concrete block1. However, 1coria, which can replace sand and cnuhed itone agsregate1, has not been u1ed in reinforced ...

  4. and remote sensing for multi-temporal analysis of sand ...

    African Journals Online (AJOL)

    dalel

    nation of “sand” and photo-interpretation for identification of sandy soils is useful to assess wind erosion dynamics through the mapping of the spatial and temporal evolution of sandy soil. According to these results, Oglet Merteba is more affected by sand accumulation over the last de- cade. The more aggressive period is ...

  5. Adsorption of Dyes Using Different Types of Sand: A Review

    African Journals Online (AJOL)

    NICO

    KEYWORDS. Adsorption, dyes, low-cost adsorbents, sand. 1. Introduction. Several dyes and their break-down products are toxic for living organisms because dyes are not easily degradable and are gener- ally not removed from wastewater by conventional wastewater treatment systems; this makes it difficult to remove dyes ...

  6. The field enhancement factor of sand-blasted electrodes

    DEFF Research Database (Denmark)

    McAllister, Iain Wilson; Vibholm (fratrådt), Svend

    1992-01-01

    A sample of six sand-blasted electrodes has been subjected to both mechanical and electrical investigations. When the surfaces of a series of conductors are mechanically treated, the resultant microscopic surface geometries will be similar, but not identical. As a consequence of this spread...

  7. Chromian spinel-rich black sands from eastern shoreline of ...

    Indian Academy of Sciences (India)

    Chromian spinel-rich black sands from eastern shoreline of Andaman Island. 1389. Figure 1. (a) Regional tectonic framework of southeast Asia (redrawn after Mitchell 1985) and (b) the geological map of. Andaman Island (modified from Bandopadhyay 2005) showing the distribution of the Ophiolite Group along with other.

  8. Sand and Water Play: Simple, Creative Activities for Young Children.

    Science.gov (United States)

    West, Sherrie; Cox, Amy

    Based on the view that creative play and hands-on experiences are essential to the development of well-balanced children and that their teachers have the responsibility to create an environment that can stimulate children's senses and curiosity, this book provides activities incorporating the use of sand and water tables into the classroom on a…

  9. Assessment of Pumice Blocks in Comparison to Cement Sand ...

    African Journals Online (AJOL)

    Modern buildings are standard and habitable structures that provide users with privacy, storage of properties, security and living area, amongst others. However, most people ... Samples of pumice material, and cement sand pumice blocks in different ratios have been prepared and tested in a laboratory. Results showed the ...

  10. Shear strength properties of naturally occurring bituminous sands

    CSIR Research Space (South Africa)

    Anochie-Boateng, Joseph

    2009-06-01

    Full Text Available because of the cohesive nature of bitumen contents. However, results from the direct shear tests were comparable to properties of oil sands reported earlier from various other laboratory tests. Based on the direct shear test results, Mohr-Coulomb failure...

  11. HYDRATION IN THE SAND SHRIMP CRANGON SEPTEMSPINOSA: RELATION TO DIET.

    Science.gov (United States)

    Wilcox, J Ross; Jeffries, H Perry

    1976-06-01

    Tissue hydration in the estuarine sand shrimp Crangon septemspinosa is correlated with nutritional conditions. Hydration levels of shrimp who are ingesting food remain normal. In starved shrimp or in individuals who are not ingesting adequate amounts of food, hydration levels are high. Presumably, water replaces metabolized tissues.

  12. Cluster analysis of radionuclide concentrations in beach sand

    NARCIS (Netherlands)

    de Meijer, R.J.; James, I.; Jennings, P.J.; Keoyers, J.E.

    This paper presents a method in which natural radionuclide concentrations of beach sand minerals are traced along a stretch of coast by cluster analysis. This analysis yields two groups of mineral deposit with different origins. The method deviates from standard methods of following dispersal of

  13. Effect of sillimanite beach sand composition on mullitization and ...

    Indian Academy of Sciences (India)

    Unknown

    depleted/exhausted in many parts of the world. Placer deposits of beach sand sillimanite minerals occur in a number of coastal areas. Placer deposits are of two types, viz. beach placers and inland placers. In India, sillimanite beach placer deposits are found in the eastern and southern coasts (Nagar 1995). In the pre-.

  14. Indigenous plant based coagulants/disinfectants and sand filter ...

    African Journals Online (AJOL)

    An Evaluation of plant- based coagulants and disinfectant-sand filter medium for surface water treatment in Bamenda, Cameroon using bacterial analyses and turbidity were carried out. 100L of very turbid surface water (Turbidity approx. 500NTU) was pretreated with 100 seeds of Moringa oleifera, and further filtered ...

  15. A New Sand-Culture Apparatus for Tree Nutrition Research

    Science.gov (United States)

    B. G. Blackmon; N. E. Linnartz

    1970-01-01

    Research in tree nutrition often necessitates the use of rather large-scale installations of sand-culture equipment. The apparatus described below was developed during the course of experiments at Louisiana State University and provided daily irrigation to 102 culture units of loblolly pine (Pinus taeda L.) for a period of 10 months. This apparatus is a modification of...

  16. Geochemistry of dark coastal heavy-mineral beaches sand (Annaba ...

    African Journals Online (AJOL)

    Acer

    correlation between the concentration of major, traces and REE elements and the amount of heavy and especially metamorphic minerals like garnet, staurolite, tourmaline and epidote. Key words: Heavy minerals- Major - Trace element – REE- Sand-Beach. * Corresponding Author: Chemam.asma@gmail.com ...

  17. Sand Particles Impact on the Tribological Behavior of Sliding Contact

    Directory of Open Access Journals (Sweden)

    Aldajah Saud

    2016-01-01

    Full Text Available Lubricant contaminants cause severe problems to machines. Substantial research has been conducted to study the impact of such contaminates on the tribological performance of lubricated contacts. The primary goal of such studies is to find solutions to avoid the dirtiest cause of damaging machines’ parts and to reduce energy consumption and maintenance costs. The current study investigates the tribological behavior of contaminated lubricated contacts; the contaminants considered in this research are sand particles. The effect of the sand particles concentration levels on friction and wear of a tribological system under sliding contact was studied. Three different concentration levels were tested; 5%, 10% and 15%.The experimental program was carried out using an in-house built ball on disc machine at room temperature, constant normal load, constant speed, constant running time and constant travelling distance. Results showed that both friction coefficient and wear volume of the contacting surfaces are dependent on the concentration level of the sand particles. Both friction coefficient and wear volume increased by increasing the sand particles concentration. SEM was utilized to study the wear mechanisms of the contacting surfaces, it was found that the dominant wear mechanism in all cases was abrasive wear.

  18. Journal of EEA, Vol. 30, 2013 SAND SINTERING PROBLEM ON ...

    African Journals Online (AJOL)

    dell

    casting defects of sand flushing. Coatings also improve performance and internal quality of casting surface. In the process, casting coating is done by adding insulation material and chill material, so as to improve the mold cavity temperature distribution and control of solidification and crystallization process of casting surface ...

  19. Pilot Study on Carbon-sand Filter for Sedimentation Effluent

    Directory of Open Access Journals (Sweden)

    Zhang Shuo

    2015-01-01

    Full Text Available The development of dual function of integrating with activated carbon adsorption and quartz sand filtration in the carbon-sand filter can collaboratively remove organic matters and turbidity and also protect the bio-security, and the pilot test is carried out to optimize the process parameters. The pilot test results show that the thickness of the filter materials is preferably 1,300mm of the activated carbon, 500mm of uniform quartz sand; filtration rate can be 8-12m/h; filter cycle is 24-48h; when the water temperature is 21°C to 29°C, the biofilm formation period in the carbon-sand filter is 15 to 20 days; removal of the organic matters and nitrogen runs through the entire filter bed, and the nitrite is mainly oxidized on the upper side; when the operation is mature, the layer of filter materials can form the biofilm and zoogloea, with the dual function of micro-biological degradation and activated carbon adsorption.

  20. In Vitro Cytotoxic Potential of Afghanistan Sand Extract

    Science.gov (United States)

    2013-02-05

    Vitamin D enhances caspase- dependent and -independent TNF alpha-induced breast cancer cell death: The role of reactive oxygen species and mitochondria...including barium, strontium, copper, arsenic , nickel, iron, 13 potassium, manganese, and chromium (Table 1). Additional heavy metals (aluminum...strontium, copper, arsenic , iron, potassium, nickel, manganese, and chromium were detected in the soluble extracts of Afghanistan sand sample (Table 1

  1. Does denitrification occur within porous carbonate sand grains?

    Science.gov (United States)

    Miall Cook, Perran Louis; Kessler, Adam John; Eyre, Bradley David

    2017-09-01

    Permeable carbonate sands form a major habitat type on coral reefs and play a major role in organic matter recycling. Nitrogen cycling within these sediments is likely to play a major role in coral reef productivity, yet it remains poorly studied. Here, we used flow-through reactors and stirred reactors to quantify potential rates of denitrification and the dependence of denitrification on oxygen concentrations in permeable carbonate sands at three sites on Heron Island, Australia. Our results showed that potential rates of denitrification fell within the range of 2-28 µmol L-1 sediment h-1 and were very low compared to oxygen consumption rates, consistent with previous studies of silicate sands. Denitrification was observed to commence at porewater oxygen concentrations as high as 50 µM in stirred reactor experiments on the coarse sediment fraction (2-10 mm) and at oxygen concentrations of 10-20 µM in flow-through and stirred reactor experiments at a site with a median sediment grain size of 0.9 mm. No denitrification was detected in sediments under oxic conditions from another site with finer sediment (median grain size: 0.7 mm). We interpret these results as confirmation that denitrification may occur within anoxic microniches present within porous carbonate sand grains. The occurrence of such microniches has the potential to enhance denitrification rates within carbonate sediments; however further work is required to elucidate the extent and ecological significance of this effect.

  2. Production of fish finger from sand smelt (Atherina boyeri, RISSO ...

    African Journals Online (AJOL)

    Administrator

    2011-05-23

    May 23, 2011 ... Production of fish finger from sand smelt (Atherina boyeri, RISSO 1810) and determination of quality changes. Levent Izci*, Şengül Bilgin and Ali Günlü. Departmant of Fishing and Fish Processing Technology, Faculty of Fisheries, University of Süleyman Demirel, 32500. Eğirdir, Isparta, Turkey. Accepted 30 ...

  3. A Scientific World in a Grain of Sand

    Science.gov (United States)

    Clary, Renee; Wandersee, James

    2011-01-01

    Students investigate local sand samples on a shoestring budget. This investigation reveals a fascinating Earth history that can address various interdisciplinary scientific topics, provide rich inquiry experiences, and move beyond the science classroom to integrate history, culture, and art. (Contains 3 figures and 14 online resources.)

  4. 76 FR 78168 - Importation of Chinese Sand Pears From China

    Science.gov (United States)

    2011-12-16

    ..., sand pears from areas in China in which the Oriental fruit fly (Bactrocera dorsalis) is not known to...), an aphid. Bactrocera dorsalis, Oriental fruit fly. Caleptrimerus neimongolensis Kuang and Geng, a... (Zacher), Hawthorn spider mite; Aphanostigma iaksuiense (Kishida), an ] aphid; Bactrocera dorsalis...

  5. Design, Construction and Testing of a Dry Sand Sieving Machine ...

    African Journals Online (AJOL)

    This paper reports on the design, construction and Testing of a dry sand sieving machine. The sample to be sieved is uniformly graded. The coefficient of uniformity is 1.11, thus the machine design does not sieve larger particles such as gravel. The slip calculated is 36% which enabled the proper configuration of the V-belt.

  6. Evaluation of an Intergrated / Biocoagulant-sand filter Drum for ...

    African Journals Online (AJOL)

    User

    2015-03-18

    Mar 18, 2015 ... An integrated low-tech biocoagulant-sand filter drum for disinfection of oocysts of Toxoplasma gondii targeted for developing countries was evaluated. Dirty and turbid water (130.3 NTU) from Mezam River and leachates from dump sites and stagnant water in Bamenda, Cameroon, was analyzed ...

  7. Monitoring of rapid sand filters using an acoustic imaging technique

    NARCIS (Netherlands)

    Allouche, N.; Simons, D.G.; Rietveld, L.C.

    2012-01-01

    A novel instrument is developed to acoustically image sand filters used for water treatment and monitor their performance. The instrument consists of an omnidirectional transmitter that generates a chirp with a frequency range between 10 and 110 kHz, and an array of hydrophones. The instrument was

  8. Bearing capacity of Skirt circular footing on sand

    Directory of Open Access Journals (Sweden)

    Amr Z. EL Wakil

    2013-09-01

    Full Text Available Skirts are used to improve the bearing capacity of shallow footings on sandy soil by constraining the soil beneath and containing the plastic flow of soil. They are used as an alternative to deep foundations in soils with low strength at the surface. As there has been available little work studying the performance of skirted foundation, we are performing eighteen laboratory experiments on circular steel footings of different diameters and different skirt lengths. The aim of these experiments is to shed some lights on the effects of skirts on the bearing capacity of shallow footings. The effects of skirt length and the relative density of sand on the ultimate load attained were investigated. From the accomplished laboratory tests, it was found that skirts improve appreciably the sustainability of shallow footings to applied load as they increase the ultimate load of shallow footings by some up to 6.25 times for the current study conditions and variables. The performance of skirted footing depends upon the relative density of sand and on the skirt length to footing diameter ratio. Skirts are more beneficial in case of footings on loose sand than in case of medium and dense sand.

  9. Evaluation of Small-Scale Laterally Loaded Monopiles in Sand

    DEFF Research Database (Denmark)

    Roesen, Hanne Ravn; Thomassen, Kristina; Ibsen, Lars Bo

    2011-01-01

    In current designs of offshore wind turbines, monopiles are often used as foundation. The behaviour of the monopoles when subjected to lateral loading has not been fully investigated. In this paper the diameter effect on laterally loaded non-slender piles in sand is evaluated by means of results...

  10. Groundwater resources of Nanka Sands aquifers around Nanka ...

    African Journals Online (AJOL)

    geochemical characteristics of the Nanka-Oko area, southeastern, Nigeria. The area is underlain by the Nanka Sands Formation. Data from 14 vertical electrical soundings (VES) were interpreted using IPI2win software. A total of 16 groundwater samples, ...

  11. New inline desander technology for challenging sand separation applications

    Energy Technology Data Exchange (ETDEWEB)

    Abdalla, T.; Akdim, M.R.; Fantoft, R. [FMC Technologies. Arnhem (Netherlands). CDS Separation Systems

    2010-07-01

    Sand production is a problematic issue for many oil and gas operators. This paper presented details of a desanding technology designed for heavy crude applications as well as multiphase streams containing gas. the InLine desander application can also be used in sub-sea separation systems. The desander was designed to obtain a high separation efficiency the ability to accept high inlet sand concentrations. The desander was comprised of a fluid flow inlet and an axial swirl element that generates high rotational velocities that drive gravitational forces in a separation chamber. The generated G-forces pushed solids to the outer surfaces and downward to the solids outlet. Separated solids were extracted either as particles to settle into an accumulation vessel, or as a highly concentrated slurry. A secondary liquid was then created in the centre of the desander to moved upward and exited via a vortex finder into a liquid outlet. The technology can also be used for small particles and bulk sand separation technologies. Methods for evaluating the efficiency of sand removal efficiency for different desanders were also presented, and process applications were reviewed. 2 tabs., 9 figs.

  12. Static Tension Tests on Axially Loaded Pile Segments in Sand

    DEFF Research Database (Denmark)

    Thomassen, Kristina; Andersen, Lars Vabbersgaard; Ibsen, Lars Bo

    This paper provides laboratory test results of static axially loaded piles in sand. With a newly developed test setup, the pile-soil interface friction was investigated by using an open-ended steel pile segment with a diameter of 0.5 m. Use of a pile length of 1 m enabled the pile-soil interface...

  13. Drained True Triaxial Tests on Aalborg University Sand No 0

    DEFF Research Database (Denmark)

    Praastrup, U.

    The paper presents the first series of true triaxial tests carried out on air-pluviated unfrozen and frozen specimens of Aalborg University Sand No O. The specimens have been tested in the newly improved version of the Danish rigid boundary true triaxial apparatus to optimise the preparation and ...

  14. Anatomical studies of the gastrointestinal tract of the striped sand ...

    African Journals Online (AJOL)

    A study was carried out on the gross anatomical, morphometric features and histology of the gastrointestinal tract of the Striped Sand Snake (Psammophis sibilans). Ten snakes (five males and five females) were euthanized and dissected for the study. The gastrointestinal tract appeared as a straight tubular organ from oral ...

  15. Performance of sand-lime products made with plastic waste

    Directory of Open Access Journals (Sweden)

    Nowek Milena

    2016-01-01

    Full Text Available The paper describes the studies on the sand-lime (silicate masonry units modified with recycled plastics in various forms: regranulate, regrind and powder. The following materials were examined: high impact polystyrene (HIPS and acrylonitrile butadiene styrene (ABS. The results of the functional properties tests, such as compressive strength, softening behavior, bulk density and water absorption are presented in the article. The microstructure of the products was analyzed using SEM and XRD methods.Obtained results show that the properties of modified product largely depend on the type, form and amount of used polymer. The highest compressive strength was achieved with 15% of HIPS regranulate in the product (by weight. ABS does not improve the strength of the sample, however, it does block the capillary action in the sand-lime product. The lowest softening coefficient was obtained in the sample modified with HIPS regranulate. The examined polymers contributed to decrease in bulk density of the samples as well as lowered their water absorption. The samples with pulverized polymer have the worst properties. All the results are compared with those of the traditional sand-lime bricks and sand-lime product modified with other additives. The analysis indicate that silicate masonry units with post-production and post-consumption plastic waste can possess interesting functional properties what brings a new potential possibility to dispose of still growing number of plastic waste.

  16. Connecting Brabant's cover sand landscapes through landscape history

    Science.gov (United States)

    Heskes, Erik; van den Ancker, Hanneke; Jungerius, Pieter Dirk; Harthoorn, Jaap; Maes, Bert; Leenders, Karel; de Jongh, Piet; Kluiving, Sjoerd; van den Oetelaar, Ger

    2015-04-01

    Noord-Brabant has the largest variety of cover sand landscapes in The Netherlands, and probably in Western Europe. During the Last Ice Age the area was not covered by land ice and a polar desert developed in which sand dunes buried the existing river landscapes. Some of these polar dune landscapes experienced a geomorphological and soil development that remained virtually untouched up to the present day, such as the low parabolic dunes of the Strabrechtse Heide or the later and higher dunes of the Oisterwijkse Vennen. As Noord-Brabant lies on the fringe of a tectonic basin, the thickness of cover sand deposits in the Centrale Slenk, part of a rift through Europe, amounts up to 20 metres. Cover sand deposits along the fault lines cause the special phenomenon of 'wijst' to develop, in which the higher grounds are wetter than the boarding lower grounds. Since 4000 BC humans settled in these cover sand landscapes and made use of its small-scale variety. An example are the prehistoric finds on the flanks and the historic towns on top of the 'donken' in northwest Noord-Brabant, where the cover sand landscapes are buried by river and marine deposits and only the peaks of the dunes protrude as donken. Or the church of Handel that is built beside a 'wijst' source and a site of pilgrimage since living memory. Or the 'essen' and plaggen agriculture that developed along the stream valleys of Noord-Brabant from 1300 AD onwards, giving rise to geomorphological features as 'randwallen' and plaggen soils of more than a metre thickness. Each region of Brabant each has its own approach in attracting tourists and has not yet used this common landscape history to connect, manage and promote their territories. We propose a landscape-historical approach to develop a national or European Geopark Brabants' cover sand landscapes, in which each region focuses on a specific part of the landscape history of Brabant, that stretches from the Late Weichselian polar desert when the dune

  17. Studies on littoral and sublittoral macrophytes around the Mauritius coast

    Digital Repository Service at National Institute of Oceanography (India)

    Jagtap, T.G.

    zones. Only a few species of seaweeds, such as Asparagopsis taxiformis, Halimeda spp, Turbinaria ornata, and coralline algae, were associated with corals in the subtidal regions. The most widely distributed marine algae were Ulva spp., Enteromorpha...

  18. Sub-littoral meiobenthos of the northeastern Bay of Bengal

    Digital Repository Service at National Institute of Oceanography (India)

    Rodrigues, C.L.; Harkantra, S.N.; Parulekar, A.H.

    super(3)m/2 (median = 31.45 x 10 super(3)) Distribution was contagious with varied fauna in the nearshore region On the basis of metabolic index, the food requirement of the benthic community (macro+meio) in the Bay of Bengal was found to be lower than...

  19. The ecology of deep sublittoral populations of Mediterranean gorgonians

    OpenAIRE

    Gori, Andrea

    2011-01-01

    Memoria de tesis doctoral presentada por Andrea Gori para optar al grado de Doctor por la Universitat de Barcelona (UB), realizada bajo la dirección del Dr. Josep Maria Gili Sardá del Institut de Ciències del Mar (ICM-CSIC) y del Dr. Sergio Rossi Heras.-- 155 pages

  20. Sublittoral seaweed communities on natural and artificial substrata ...

    African Journals Online (AJOL)

    dominated state. Subtidal, high-latitude western Indian Ocean coral communities at Sodwana Bay on the KwaZulu-Natal coast, South Africa, have experienced some mortality because of warm-water anomalies, storms and other causes, but ...