WorldWideScience

Sample records for subject bla manufacturer

  1. Maintenance scheduling of a manufacturing system subject to deterioration

    International Nuclear Information System (INIS)

    Ahmadi, Reza; Newby, Martin

    2011-01-01

    This paper presents an integrated model for the joint determination of both optimal inspection strategy and optimal repair policy for a manufacturing system whose resulting output is subject to system state. An appropriate maintenance strategy is essential to optimize revenue from a manufacturing system which is in continuous operation and subject to deterioration. The optimum policy balances the amount of maintenance required to increase availability against the loss of revenue arising from the down time: insufficient maintenance leads to an increase in the number of defective items, low profit and low maintenance cost; excessive maintenance results in a reduction in the proportion of defective items, high profit and high maintenance cost. In this paper, an intensity control model adapted to partial information provides an optimal inspection intensity and repair degree of the system as an optimal control process to yield maximum revenue. The solution is obtained through formulating an equivalent deterministic Hamilton-Jacobi equation. A numerical example is provided to illustrate the behavior of the optimal control process. The optimal control process determines a solution to both optimum inspection frequency and optimal replacement policy which results in an optimal production run length of the system. - Highlights: → We develop an optimum asset management strategy based on the revenue generated by the asset. → The optimum strategy controls the intensity, rate of occurrence, of interruptions to service. → The decisions are based on partial observation of the system and do not need perfect information. There is no need for continuous monitoring of the system.

  2. 2000 survey of window manufacturers on the subject of switchable glass

    Science.gov (United States)

    LaPointe, Michael R.; Sottile, Gregory M.

    2001-11-01

    The results of a 2000 survey of United States window manufacturers on the subject of switchable glass are discussed. The areas covered in this paper include awareness of the overall product category of switchable glass and various types of switchable glass, attitudes toward specific features of switchable glass, expectations for manufacturer production of such products, expectations for market penetration rates among end-product consumers, levels of price sensitivity among window manufacturers regarding switchable glass, and expectations for the pace of new product development within the window industry over the next five years.

  3. Incidence of blaNDM-1 gene in Escherichia coli isolates at a tertiary care referral hospital in Northeast India

    Directory of Open Access Journals (Sweden)

    A Bora

    2013-01-01

    Full Text Available Purpose: Increasing reports on New Delhi metallo-β-lactamase-1 (NDM-1 producing Escherichia coli constitute a serious threat to global health since it is found to be highly resistant to most of the currently available antibiotics including carbapenems. This study has been performed to find out the incidence blaNDM-1 in E. coli isolates recovered from the various clinical samples at a tertiary care referral hospital in Northeast India. Materials and Methods: A total of 270 non-duplicated E. coli isolates were recovered from the various clinical samples at a tertiary care referral hospital in Northeast India. All isolates with reduced susceptibility to meropenem or ertapenem (diameter of zones of inhibition, ≤21 mm were further phenotypically confirmed for carbapenemase production by modified Hodge test. All screened isolates were also subjected to the polymerase chain reaction detection of blaNDM-1 gene and additional bla genes coding for transmission electron microscopy, SHV, CTX-M, and AmpC. Results: Out of 270 E. coli isolates, 14 were screened for carbapenemase production on the basis of their reduced susceptibility to meropenem or ertapenem. All screened isolates were found to be positive for blaNDM-1 . Each of the blaNDM-1 possessing isolate was also positive for two or more additional bla genes, such as blaTEM , blaCTX-M and blaAmpC . Phylogenetic analysis showed very less variation in blaNDM-1 gene with respect to blaNDM-1 possessing E. coli isolates from other parts of India and abroad. Conclusions: Our findings highlight the incidence of blaNDM-1 in E. coli isolates with a reduced susceptibility to meropenem or ertapenem.

  4. Detection of P. aeruginosa harboring bla CTX-M-2, bla GES-1 and bla GES-5, bla IMP-1 and bla SPM-1 causing infections in Brazilian tertiary-care hospital

    Science.gov (United States)

    2012-01-01

    Background Nosocomial infections caused by Pseudomonas aeruginosa presenting resistance to beta-lactam drugs are one of the most challenging targets for antimicrobial therapy, leading to substantial increase in mortality rates in hospitals worldwide. In this context, P. aeruginosa harboring acquired mechanisms of resistance, such as production of metallo-beta-lactamase (MBLs) and extended-spectrum beta-lactamases (ESBLs) have the highest clinical impact. Hence, this study was designed to investigate the presence of genes codifying for MBLs and ESBLs among carbapenem resistant P. aeruginosa isolated in a Brazilian 720-bed teaching tertiary care hospital. Methods Fifty-six carbapenem-resistant P. aeruginosa strains were evaluated for the presence of MBL and ESBL genes. Strains presenting MBL and/or ESBL genes were submitted to pulsed-field gel electrophoresis for genetic similarity evaluation. Results Despite the carbapenem resistance, genes for MBLs (blaSPM-1 or blaIMP-1) were detected in only 26.7% of isolates. Genes encoding ESBLs were detected in 23.2% of isolates. The blaCTX-M-2 was the most prevalent ESBL gene (19.6%), followed by blaGES-1 and blaGES-5 detected in one isolate each. In all isolates presenting MBL phenotype by double-disc synergy test (DDST), the blaSPM-1 or blaIMP-1 genes were detected. In addition, blaIMP-1 was also detected in three isolates which did not display any MBL phenotype. These isolates also presented the blaCTX-M-2 gene. The co-existence of blaCTX-M-2 with blaIMP-1 is presently reported for the first time, as like as co-existence of blaGES-1 with blaIMP-1. Conclusions In this study MBLs production was not the major mechanism of resistance to carbapenems, suggesting the occurrence of multidrug efflux pumps, reduction in porin channels and production of other beta-lactamases. The detection of blaCTX-M-2,blaGES-1 and blaGES-5 reflects the recent emergence of ESBLs among antimicrobial resistant P. aeruginosa and the extraordinary

  5. Detection of P. aeruginosa harboring bla CTX-M-2, bla GES-1 and bla GES-5, bla IMP-1 and bla SPM-1 causing infections in Brazilian tertiary-care hospital

    Directory of Open Access Journals (Sweden)

    Polotto Milena

    2012-08-01

    Full Text Available Abstract Background Nosocomial infections caused by Pseudomonas aeruginosa presenting resistance to beta-lactam drugs are one of the most challenging targets for antimicrobial therapy, leading to substantial increase in mortality rates in hospitals worldwide. In this context, P. aeruginosa harboring acquired mechanisms of resistance, such as production of metallo-beta-lactamase (MBLs and extended-spectrum beta-lactamases (ESBLs have the highest clinical impact. Hence, this study was designed to investigate the presence of genes codifying for MBLs and ESBLs among carbapenem resistant P. aeruginosa isolated in a Brazilian 720-bed teaching tertiary care hospital. Methods Fifty-six carbapenem-resistant P. aeruginosa strains were evaluated for the presence of MBL and ESBL genes. Strains presenting MBL and/or ESBL genes were submitted to pulsed-field gel electrophoresis for genetic similarity evaluation. Results Despite the carbapenem resistance, genes for MBLs (blaSPM-1 or blaIMP-1 were detected in only 26.7% of isolates. Genes encoding ESBLs were detected in 23.2% of isolates. The blaCTX-M-2 was the most prevalent ESBL gene (19.6%, followed by blaGES-1 and blaGES-5 detected in one isolate each. In all isolates presenting MBL phenotype by double-disc synergy test (DDST, the blaSPM-1 or blaIMP-1 genes were detected. In addition, blaIMP-1 was also detected in three isolates which did not display any MBL phenotype. These isolates also presented the blaCTX-M-2 gene. The co-existence of blaCTX-M-2 with blaIMP-1 is presently reported for the first time, as like as co-existence of blaGES-1 with blaIMP-1. Conclusions In this study MBLs production was not the major mechanism of resistance to carbapenems, suggesting the occurrence of multidrug efflux pumps, reduction in porin channels and production of other beta-lactamases. The detection of blaCTX-M-2,blaGES-1 and blaGES-5 reflects the recent emergence of ESBLs among antimicrobial resistant P. aeruginosa and

  6. Occurrence of Enterobacter hormaechei carrying blaNDM-1 and blaKPC-2 in China.

    Science.gov (United States)

    Yang, Biwei; Feng, Yu; McNally, Alan; Zong, Zhiyong

    2018-02-01

    Three carbapenem-resistant clinical isolates of the Enterobacter cloacae complex (ECC) were recovered from different patients in a hospital. All 3 isolates carried 2 carbapenemase genes bla KPC-2 and bla NDM-1 . A study was performed to characterize their relatedness and to investigate possible links among the patients. Whole genome sequencing revealed that the isolates were Enterobacter hormaechei and belonged to ST177 of the ECC. There were 19-142 single nucleotide polymorphisms (SNPs) between the isolates, suggesting that the isolates were likely from a central reservoir, which might have existed for some time. bla KPC-2 and bla NDM-1 were carried on 2 different IncF-type plasmids in the isolates. The 3 bla NDM-1 -carrying plasmids were almost identical and were self-transmissible, while the bla KPC-2 -carrying plasmids were only transmissible in the presence of the bla NDM-1 -carrying plasmid. The source of and direct links among them were not identified, suggesting a hospital transmission of a common multidrug resistant strain. Copyright © 2017 Elsevier Inc. All rights reserved.

  7. Identification of blaOXA-51, blaOXA-58, blaDIM-1 and blaVIM carbapenemase genes in hospital enterobacteriaceae isolates from Sierra Leone

    Science.gov (United States)

    We describe the results of a molecular epidemiological survey of 15 carbapenemase-encoding genes from a recent collection of clinical isolates. The most salient findings revealed that (i) 60% of the isolates harbored multiple carbapenemase genes, (ii) the blaDIM-1 gene that has only been reported in...

  8. Detection of multidrug-resistant Pseudomonas aeruginosa harboring bla GES-1 and bla GES-11 in Recife, Brazil

    Directory of Open Access Journals (Sweden)

    Valdemir Vicente da Silva Júnior

    Full Text Available Abstract INTRODUCTION: Pseudomonas aeruginosa, an important pathogen globally, presents several resistance mechanisms. This study aimed to investigate the presence of bla GES in clinical isolates of Pseudomonas aeruginosa obtained from various clinical specimens from patients admitted to three different hospitals in Recife, Brazil. The Guiana extended spectrum beta-lactamase (GES enzymes are responsible for conferring broad spectrum resistance to beta-lactam drugs, including the carbapenems. METHODS: A total of 100 carbapenem-resistant P. aeruginosa isolates underwent polymerase chain reaction (PCR testing to identify bla GES, bla KPC, bla SPM-1, bla IMP, and bla VIM. Additionally, PCR products positive for bla GES were sequenced. The clonal profiles of these same isolates were then determined by means of enterobacterial repetitive intergenic consensus (ERIC-PCR analysis. RESULTS: PCR analysis revealed that four isolates harbored bla GES; DNA sequencing showed that two harbored bla GES-1 and two bla GES-11. Beta-lactamase genes bla SPM-1, bla IMP, bla VIM, and bla KPC were investigated; none of these genes was detected. Automated susceptibility testing methods (Vitek®2, bioMérieux showed that the bla GES-1-positive isolates were only susceptible to polymyxin B. The patterns obtained with ERIC-PCR methods showed clonal relationship between the two isolates that harbored bla GES-11, whereas different clonal profiles were found in the isolates harboring bla GES-1. CONCLUSIONS: We detected the presence of bacterial isolates positive for two different variants of the enzyme GES in three different hospitals from Recife, Brazil. These enzymes have a great capacity for dissemination among Gram-negative bacteria and confer broad-spectrum resistance to beta-lactam antibiotics and to the carbapenems.

  9. Prevalence of blaTEM , blaSHV and blaCTX-M genes in clinical isolates of Escherichia coli and Klebsiella pneumoniae from Northeast India

    Directory of Open Access Journals (Sweden)

    Arijit Bora

    2014-01-01

    Full Text Available Aim: This study was carried out to determine the presence of blaTEM , blaSHV and blaCTX-M genes in extended-spectrum β-lactamase (ESBL producing Escherichia coli (E. coli and Klebsiella pneumoniae (K. pneumoniae at a tertiary care referral hospital in Northeast India. Materials and Methods: A total of 270 E. coli and 219 K. pneumoniae isolates were recovered during the period between August 2009 and July 2010. Kirby-Bauer disk diffusion method was performed to determine the antibiotic resistance pattern. Screening and phenotypic confirmatory test for ESBL production were performed using standard disc diffusion methods. Each of the initial ESBL screening test isolate was investigated for the presence of blaTEM , blaSHV and blaCTX-M genes via polymerase chain reaction (PCR using gene-specific primers. Results: Phenotypic confirmatory test able to detect ESBL production in 73.58% of E. coli and 67.24% of K. pneumoniae. However, PCR amplification showed the presence of one or more ESBL genes in each of the initial ESBL screening positive isolate. Among three ESBL genotypes, the most prevalent genotype was found to be blaCTX-M in E. coli (88.67% and blaTEM in K. pneumoniae (77.58% ESBL producing isolates. Majority of ESBL producing isolates possess more than one ESBL genes. Conclusion: This study constituted a primer report on high prevalence of blaTEM and blaCTX-M genes in ESBL producing isolates of E. coli and K. pneumoniae and denotes the need of more extensive studies on these antibiotic genes to determine the magnitude of the problem of antibiotic resistance exiting in this locality.

  10. 75 FR 26967 - Guidance for Industry: Use of Water by Food Manufacturers in Areas Subject to a Boil-Water...

    Science.gov (United States)

    2010-05-13

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-D-0236] Guidance for Industry: Use of Water by Food Manufacturers in Areas Subject to a Boil-Water Advisory; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug...

  11. Detection of bla KPC-2 in Proteus mirabilis in Brazil

    Directory of Open Access Journals (Sweden)

    Adriane Borges Cabral

    2015-02-01

    Full Text Available INTRODUCTION : Infections caused by Klebsiella pneumoniae carbapenemase (KPC-producing isolates pose a major worldwide public health problem today. METHODS : A carbapenem-resistant Proteus mirabilis clinical isolate was investigated for plasmid profiles and the occurrence of β-lactamase genes. RESULTS : The isolate exhibited resistance to ertapenem and imipenem and was susceptible to meropenem, polymyxin, and tigecycline. Five plasmids were identified in this isolate. DNA sequencing analysis revealed the presence of bla KPC-2 and bla TEM-1 genes. An additional PCR using plasmid DNA confirmed that bla KPC-2 was present in one of these plasmids. Conclusions: We report the detection of bla KPC-2 in P. mirabilis in Brazil for the first time. This finding highlights the continuous transfer of bla KPC between bacterial genera, which presents a serious challenge to the prevention of infection by multidrug-resistant bacteria.

  12. Abundance of carbapenemase genes (blaKPC, blaNDM and blaOXA-48) in wastewater effluents from Tunisian hospitals.

    Science.gov (United States)

    Nasri, Emna; Subirats, Jessica; Sànchez-Melsió, Alexandre; Mansour, Hedi Ben; Borrego, Carles M; Balcázar, José Luis

    2017-10-01

    Carbapenems are β-lactam antibiotics with a broad spectrum of activity and are usually considered the last resort for the treatment of severe infections caused by multidrug-resistant pathogens. The clinically most significant carbapenemases are KPC, NDM, and OXA-48-like enzymes, whose genes have been increasingly reported worldwide in members of the family Enterobacteriaceae. In this study, we quantified the abundance of these genes in wastewater effluents from different Tunisian hospitals. The bla NDM and bla OXA-48 -like genes were detected at similar concentrations in all hospital wastewater effluents. In contrast, the bla KPC gene was detected at lower concentration than other genes and it was only detected in three of the seven effluents analyzed. To the best of our knowledge, this study quantified for the first time the abundance of bla KPC , bla NDM , and bla OXA-48 -like genes in wastewater effluents from Tunisian hospitals, highlighting the widespread distribution of these carbapenemase genes. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. First Report of blaCTX-M-28 in Enterobacteriaceae Isolates in the United Arab Emirates

    Directory of Open Access Journals (Sweden)

    Mubarak Alfaresi

    2018-01-01

    Full Text Available Background. The CTX-M family of extended-spectrum beta lactamase (ESBL enzymes is comprised of over 60 blaCTX-M gene variants with the predominance of blaCTX-M-15 in many regions. In this report, we present the first description of blaCTX-M-28 in the United Arab Emirates. Methods. Forty-five non-duplicate ESBL producing isolates identified in a secondary care facility in the United Arab Emirates from June to July 2016 were studied. Gene sequencing was performed and DNA sequences were annotated using the BLAST program to identify the gene subtypes. Results. The majority of the ESBL positive isolates were E. coli (n/N=39/45; 86.6% followed by K. pneumoniae (n=5 and K. oxytoca (n=1. All isolates harboured blaCTX-M and blaTEM genes, 18 had blaSHV, and 2 were blaVIM positive. Thirty-seven isolates (82.2% were positive for blaCTX-M-28. Other blaCTX-M genes identified include blaCTX-M-167 (n=2; isolates #1 and 26 and one each for blaCTX-M-38, blaCTX-M-163, and blaCTX-M-198. No blaCTX-M-15 was identified. The predominant blaTEM subtype was blaTEM-171 (n=8 followed by one of each of blaTEM-120, blaTEM-163, and blaTEM-206. The blaSHV subtypes were blaSHV-148 and blaSHV-187. Conclusion. The findings indicate the first description of blaCTX-M-28 in a setting where blaCTX-M-15 was previously predominant.

  14. Relationship of duration of work exposure and feeling of subjective fatigue: A case study on jewelry manufacturing workers in India

    Directory of Open Access Journals (Sweden)

    Urmi Ravindra Salve

    2017-01-01

    Full Text Available Aims: Fatigue can be defined in various conditions. In literature it has been defined and explored by various researches through different aspects. This study was conducted to establish the relationship between the duration of work exposure and feeling of subjective fatigue. Materials and Methods: Twenty-one jewelry manufacturing workers as study group and 27 students as control group participated with their signed informed consent. The daily diary method and feeling of subjective fatigue evaluation questionnaire were used as a tool in this study. Three categories of feeling of subjective fatigue were considered in this study. The study was conducted mainly in the middle of the week. The data regarding feeling of subjective fatigue were collected before starting of work and after completion of the work day. Results: The results showed that The time spent on the job by the workers engaged in jewelry manufacturing was 670 min and were in four slots with the longest work period being 240 min. Sleeping time was found to be around 480 min. Conclusion: The study revealed that all three dimensions (general, mental, and physical were affected by the whole day work exposure. Among three types of fatigues, general fatigue was observed at the beginning and end of the work shift.

  15. Caracterização dos Genes de metalo-beta-lactamase blaNDM, blaSPM e blaIMP em Pseudomonas aeruginosa Resistentes a Carbapenens

    Directory of Open Access Journals (Sweden)

    Carolina Jahn

    2017-01-01

    Full Text Available Justificativa e objetivo: P. aeruginosa é responsável por causar grande variedade de infecções agudas e crônicas. A resistência aos carbapenêmicos está se tornando um problema terapêutico mundial e a produção de metalo-beta-lactamases (MBL tem surgido como um dos mecanismos responsáveis por esta resistência. Objetivou-se identificar as cepas produtoras de MBL e verificar a presença dos genes codificador blaNDM, blaSPM e blaIMP em isolados de P. aeruginosa resistentes aos carbapenens. Métodos: Foram analisadas 16 cepas de P. aeruginosa, isoladas de diferentes sítios de indivíduos atendidos pelo Hospital do Vale do Rio Pardo-RS, no período de março 2014 a fevereiro de 2015. A identificação bioquímica foi realizada segundo protocolo da ANVISA e o antibiograma pelo método de ágar difusão em disco. A triagem fenotípica foi feita pelo teste modificado de aproximação de discos utilizando o EDTA como inibidor e a presença dos genes através da técnica de reação em cadeia da polimerase. Resultados: O setor clínico com maior prevalência de isolamento de P. aeruginosa resistente aos carbapenens é a unidade de terapia intensiva (50%. Em relação aos espécimes clínicos, 62,5% dos isolados foram identificados no trato respiratório inferior. Através do teste fenotípico, 50% das amostras analisadas mostraram ser produtora da enzima MBL. Através da técnica de reação em cadeia da polimerase foi possível identificar a presença de um dos três genes propostos, sendo eles blaSPM. Conclusão: Os isolados de P. aeruginosa mostraram serem produtores de MBL e apresentaram o gene de resistência blaSPM nesta espécie no interior do Rio Grande do Sul. Palavras Chaves: Pseudomonas aeruginosa; metalo-beta-lactamases; blaNDM, blaIMP, e blaSPM .

  16. Manufacturing Sexual Subjects: ‘Harassment’, Desire and Discipline on a Maquiladora Shopfloor

    OpenAIRE

    Salzinger, L

    2000-01-01

    Standing for all instances of problematic workplace sexuality, the notion of ‘sexual harassment’ illuminates but also obscures the role of desire in work relations. It spotlights isolated individual interactions at the expense of structural processes and stresses choice and blame rather than the way in which a given workplace evokes particular sexual subjectivities in the service of production. An ethnography of shopfloor relations in a Mexican export-processing plant shows how labor control ...

  17. Bla g 1 allergen levels in Zagreb area household dust.

    Science.gov (United States)

    Prester, Ljerka; Macan, Jelena

    2011-03-01

    Cockroach allergy is a health problem in many parts of the world. In urban environments, indoor exposure to cockroach allergens involves a risk of asthma. The aim of this study was to measure the mass fraction of Bla g 1, a major allergen of the German cockroach (Blatella germanica) in 30 house samples, collected at random from Zagreb area households, Croatia. Dust samples were collected on cellulose filters by vacuuming living rooms floors. After extraction, Bla g 1 was detected using the commercial enzyme-linked immunosorbent assay (ELISA). Only four of the thirty households had detectable Bla g 1 levels, and only in one was its concentration higher than 2.0 U g(-1), the threshold associated with sensitisation. The Bla g 1 ELISA proved highly sensitive, with the detection limit of 0.12 U g(-1). The within- and between-assay imprecision was 8.9 % and 14.4 %, respectively, and accuracy 85 % to 120 %. Low Bla g 1 levels in the household dust support previously reported low prevalence of skin sensitisation to B. germanica among Zagreb residents. Further monitoring should reveal if there are differences in cockroach allergen exposure and sensitisation between households from other geographic areas in Croatia.

  18. Subjectivity

    Directory of Open Access Journals (Sweden)

    Jesús Vega Encabo

    2015-11-01

    Full Text Available In this paper, I claim that subjectivity is a way of being that is constituted through a set of practices in which the self is subject to the dangers of fictionalizing and plotting her life and self-image. I examine some ways of becoming subject through narratives and through theatrical performance before others. Through these practices, a real and active subjectivity is revealed, capable of self-knowledge and self-transformation. 

  19. Prevalence of bla SHV genes in clinical isolates of Klebsiella ...

    African Journals Online (AJOL)

    Five bacterial strains (4 Klebsiella pneumoniae and 1 Escherichia coli) representative of pathogenic species and resistant to β-lactam antibiotics are investigated to isolate the genes responsible of β--lactamase activity. The use of engineering techniques enables us to show the widespread of blaSHV genes particularly in ...

  20. The Accuracy of 3D Optical Reconstruction and Additive Manufacturing Processes in Reproducing Detailed Subject-Specific Anatomy

    Directory of Open Access Journals (Sweden)

    Paolo Ferraiuoli

    2017-10-01

    Full Text Available 3D reconstruction and 3D printing of subject-specific anatomy is a promising technology for supporting clinicians in the visualisation of disease progression and planning for surgical intervention. In this context, the 3D model is typically obtained from segmentation of magnetic resonance imaging (MRI, computed tomography (CT or echocardiography images. Although these modalities allow imaging of the tissues in vivo, assessment of quality of the reconstruction is limited by the lack of a reference geometry as the subject-specific anatomy is unknown prior to image acquisition. In this work, an optical method based on 3D digital image correlation (3D-DIC techniques is used to reconstruct the shape of the surface of an ex vivo porcine heart. This technique requires two digital charge-coupled device (CCD cameras to provide full-field shape measurements and to generate a standard tessellation language (STL file of the sample surface. The aim of this work was to quantify the error of 3D-DIC shape measurements using the additive manufacturing process. The limitations of 3D printed object resolution, the discrepancy in reconstruction of the surface of cardiac soft tissue and a 3D printed model of the same surface were evaluated. The results obtained demonstrated the ability of the 3D-DIC technique to reconstruct localised and detailed features on the cardiac surface with sub-millimeter accuracy.

  1. Characteristics of β-lactamases and their genes (blaA and blaB in Yersinia intermedia and Y. frederiksenii

    Directory of Open Access Journals (Sweden)

    Sharma Sachin

    2007-04-01

    Full Text Available Abstract Background The presence of β-lactamases in Y. enterocolitica has been reported to vary with serovars, biovars and geographical origin of the isolates. An understanding of the β-lactamases in other related species is important for an overall perception of antibiotic resistance in yersiniae. The objective of this work was to study the characteristics of β-lactamases and their genes in strains of Y. intermedia and Y. frederiksenii, isolated from clinical and non-clinical sources in India. Results The enzymes, Bla-A (a constitutive class A penicillinase and Bla-B (an inducible class C cephalosporinase were found to be present in all the clinical and non-clinical strains of Y. intermedia and Y. frederiksenii by double disc diffusion method. The results showed differential expression of Bla-A as indicated by presence/absence of synergy whereas expression of Bla-B was quite consistent. The presence of these enzymes was also reflected in the high minimum inhibitory concentrations, MIC50 (126–1024 mg/L and MIC90 (256–1024 mg/L of β-lactam antibiotics against these species. Restriction fragment length polymorphism (RFLP revealed heterogeneity in both blaA and blaB genes of Y. intermedia and Y. frederiksenii. The blaA gene of Y. intermedia shared significant sequence identity (87–96% with blaA of Y. enterocolitica biovars 1A, 1B and 4. The sequence identity of blaA of Y. frederiksenii with these biovars was 77–79%. The sequence identity of blaB gene of Y. intermedia and Y. frederiksenii was more (85% with that of Y. enterocolitica biovars 1A, 1B and 2 compared to other species viz., Y. bercovieri, Y. aldovae and Y. ruckeri. Isoelectric focusing data further revealed that both Y. intermedia and Y. frederiksenii produced Bla-A (pI 8.7 and "Bla-B like" (pI 5.5–7.1 enzymes. Conclusion Both Y. intermedia and Y. frederiksenii showed presence of blaA and blaB genes and unequivocal expression of the two β-lactamases. Limited heterogeneity

  2. blaCTX-M-I group extended spectrum beta lactamase-producing Salmonella typhi from hospitalized patients in Lagos, Nigeria

    Directory of Open Access Journals (Sweden)

    Akinyemi KO

    2015-05-01

    Full Text Available Kabiru O Akinyemi,1 Bamidele A Iwalokun,2 Olajide O Alafe,1 Sulaiman A Mudashiru,1 Christopher Fakorede,11Department of Microbiology, Lagos State University, Ojo, Lagos, Nigeria; 2Biochemistry and Nutrition Division, Nigerian Institute of Medical Research, Yaba, Lagos, NigeriaPurpose: The global spread of blaCTX-M-I extended-spectrum beta-lactamase (ESBL-producing Salmonella spp. remains a major threat to treatment and control. Evidence of emergence and spread of this marker are lacking in Nigeria. This study investigated blaCTX-M-I ESBL production among Salmonella isolates from hospitalized patients.Methods: Patients (158 total made up of two groups were evaluated. Group A was composed of 135 patients with persistent pyrexia and group B was composed of 23 gastroenteritis patients and their stool samples. Samples were cultured, and isolates were identified and were subjected to antibiotic susceptibility testing by standard methods. Isolates were further screened for ESBL production, blaCTX-M-I genes and transferability by double disk synergy test, plasmid extraction, polymerase chain reaction, and conjugation experiment.Results: Thirty-five (25.9% Salmonella isolates were identified from group A, of which 74.3% were S. typhi, 22.9% were S. paratyphi and two (5.7% were invasive non-typhoidal S. enteritidis. Nine Plasmodium falciparum infections were recorded, four of which were identified as co-infections with typhoidal Salmonella. Only two (8.7% S. enteritidis samples were obtained from group B (P>0.05. A total of 24 isolates were ESBL-positive, eliciting resistance to five to seven antibiotics, and were multiple-drug resistant. ESBL production due to the blaCTX-M-I gene cluster was detected in eleven (45.8% Salmonella isolates. Nine (81.8% of the eleven blaCTX-M-I ESBL producers were S. typhi and two (18.2% isolates were S. enteritidis. Four of nine S. typhi blaCTX-M-I ESBL-producing strains harbored 23 kb self-transmissible plasmid that was co

  3. Genetic characterization of blaNDM-harboring plasmids in carbapenem-resistant Escherichia coli from Myanmar.

    Directory of Open Access Journals (Sweden)

    Yo Sugawara

    Full Text Available The bacterial enzyme New Delhi metallo-β-lactamase hydrolyzes almost all β-lactam antibiotics, including carbapenems, which are drugs of last resort for severe bacterial infections. The spread of carbapenem-resistant Enterobacteriaceae that carry the New Delhi metallo-β-lactamase gene, blaNDM, poses a serious threat to public health. In this study, we genetically characterized eight carbapenem-resistant Escherichia coli isolates from a tertiary care hospital in Yangon, Myanmar. The eight isolates belonged to five multilocus-sequence types and harbored multiple antimicrobial-resistance genes, resulting in resistance against nearly all of the antimicrobial agents tested, except colistin and fosfomycin. Nine plasmids harboring blaNDM genes were identified from these isolates. Multiple blaNDM genes were found in the distinct Inc-replicon types of the following plasmids: an IncA/C2 plasmid harboring blaNDM-1 (n = 1, IncX3 plasmids harboring blaNDM-4 (n = 2 or blaNDM-7 (n = 1, IncFII plasmids harboring blaNDM-4 (n = 1 or blaNDM-5 (n = 3, and a multireplicon F plasmid harboring blaNDM-5 (n = 1. Comparative analysis highlighted the diversity of the blaNDM-harboring plasmids and their distinct characteristics, which depended on plasmid replicon types. The results indicate circulation of phylogenetically distinct strains of carbapenem-resistant E. coli with various plasmids harboring blaNDM genes in the hospital.

  4. Emergence and Evolution of Multidrug-Resistant Klebsiella pneumoniae with both blaKPC and blaCTX-M Integrated in the Chromosome.

    Science.gov (United States)

    Huang, Weihua; Wang, Guiqing; Sebra, Robert; Zhuge, Jian; Yin, Changhong; Aguero-Rosenfeld, Maria E; Schuetz, Audrey N; Dimitrova, Nevenka; Fallon, John T

    2017-07-01

    The extended-spectrum-β-lactamase (ESBL)- and Klebsiella pneumoniae carbapenemase (KPC)-producing Enterobacteriaceae represent serious and urgent threats to public health. In a retrospective study of multidrug-resistant K. pneumoniae , we identified three clinical isolates, CN1, CR14, and NY9, carrying both bla CTX-M and bla KPC genes. The complete genomes of these three K. pneumoniae isolates were de novo assembled by using both short- and long-read whole-genome sequencing. In CR14 and NY9, bla CTX-M and bla KPC were carried on two different plasmids. In contrast, CN1 had one copy of bla KPC-2 and three copies of bla CTX-M-15 integrated in the chromosome, for which the bla CTX-M-15 genes were linked to an insertion sequence, IS Ecp1 , whereas the bla KPC-2 gene was in the context of a Tn 4401a transposition unit conjugated with a PsP3-like prophage. Intriguingly, downstream of the Tn 4401a-bla KPC-2 -prophage genomic island, CN1 also carried a clustered regularly interspaced short palindromic repeat (CRISPR)- cas array with four spacers targeting a variety of K. pneumoniae plasmids harboring antimicrobial resistance genes. Comparative genomic analysis revealed that there were two subtypes of type I-E CRISPR- cas in K. pneumoniae strains and suggested that the evolving CRISPR- cas , with its acquired novel spacer, induced the mobilization of antimicrobial resistance genes from plasmids into the chromosome. The integration and dissemination of multiple copies of bla CTX-M and bla KPC from plasmids to chromosome depicts the complex pandemic scenario of multidrug-resistant K. pneumoniae Additionally, the implications from this study also raise concerns for the application of a CRISPR- cas strategy against antimicrobial resistance. Copyright © 2017 American Society for Microbiology.

  5. The sudden dominance of blaCTX-M harbouring plasmids in Shigella spp. Circulating in Southern Vietnam.

    Directory of Open Access Journals (Sweden)

    Nhu Thi Khanh Nguyen

    2010-06-01

    Full Text Available Plasmid mediated antimicrobial resistance in the Enterobacteriaceae is a global problem. The rise of CTX-M class extended spectrum beta lactamases (ESBLs has been well documented in industrialized countries. Vietnam is representative of a typical transitional middle income country where the spectrum of infectious diseases combined with the spread of drug resistance is shifting and bringing new healthcare challenges.We collected hospital admission data from the pediatric population attending the hospital for tropical diseases in Ho Chi Minh City with Shigella infections. Organisms were cultured from all enrolled patients and subjected to antimicrobial susceptibility testing. Those that were ESBL positive were subjected to further investigation. These investigations included PCR amplification for common ESBL genes, plasmid investigation, conjugation, microarray hybridization and DNA sequencing of a bla(CTX-M encoding plasmid.We show that two different bla(CTX-M genes are circulating in this bacterial population in this location. Sequence of one of the ESBL plasmids shows that rather than the gene being integrated into a preexisting MDR plasmid, the bla(CTX-M gene is located on relatively simple conjugative plasmid. The sequenced plasmid (pEG356 carried the bla(CTX-M-24 gene on an ISEcp1 element and demonstrated considerable sequence homology with other IncFI plasmids.The rapid dissemination, spread of antimicrobial resistance and changing population of Shigella spp. concurrent with economic growth are pertinent to many other countries undergoing similar development. Third generation cephalosporins are commonly used empiric antibiotics in Ho Chi Minh City. We recommend that these agents should not be considered for therapy of dysentery in this setting.

  6. Predominance of carbapenem-resistant Pseudomonas aeruginosa isolates carrying blaIMP and blaVIM metallo-β-lactamases in a major hospital in Costa Rica.

    Science.gov (United States)

    Toval, Francisco; Guzmán-Marte, Anel; Madriz, Vivian; Somogyi, Teresita; Rodríguez, César; García, Fernando

    2015-01-01

    This study aimed to assess the molecular basis of the resistance to carbapenems in clinical isolates of Pseudomonas aeruginosa recovered from a tertiary-level health facility in San José, Costa Rica. A total of 198 non-duplicated isolates were evaluated for their susceptibility to β-lactams, aminoglycosides and fluoroquinolones. The production of metallo-β-lactamases (MBLs), the presence of MBL encoding genes (blaIMP, blaVIM and blaGIM-1) and the occurrence of these genes within class 1 integrons were investigated. In addition, an ERIC2 PCR fingerprinting method was used to elucidate the distribution of the detected MBL genes within the strain collection. Of the 198 isolates tested, 125 (63.1 %) were categorized as carbapenem-resistant. The majority (88.8 %) of the carbapemen-resistant isolates also showed resistance to ceftazidime, cefepime, aztreonam, ticarcillin/clavulanic acid, amikacin, gentamicin, tobramycin, ciprofloxacin and gatifloxacin. Among the carbapenem-resistant isolates, 102 (81.6 %) showed MBL activity. Strikingly, both blaIMP and blaVIM genes were simultaneously detected in most (94.1 %) of the 102 MBL producers. Five carbapenem-resistant MBL producers were positive only for blaIMP genes. Almost 70 % of the isolates examined harboured the intI1 gene, accompanied by the sul1 and qacEΔ1 genes in 136 (99 %) and 122 (89 %) isolates, respectively. The majority (94.4 %) of the carbapenem-resistant isolates carried the intI1 gene, in contrast to 26 % of the carbapenem-susceptible isolates. Ninety-three out of 96 (96.9 %) isolates carrying both blaIMP and blaVIM genes also harboured the intI1, sul1 and qacEΔ1 genes. Gene cassettes from carbapenem-susceptible and MBL-negative carbapenem-resistant isolates encoded aminoglycoside-resistance enzymes (aadA2, aadA4 and aadA6) as well as orfD and qacF genes. RAPD analysis distributed 126 of the isolates in 29 clusters. Eighty of the 90 blaIMP (+) blaVIM (+) isolates were sorted into 16

  7. Emergence of blaNDM-7-Producing Enterobacteriaceae in Gabon, 2016.

    Science.gov (United States)

    Moussounda, Mesmin; Diene, Seydina M; Dos Santos, Sandra; Goudeau, Alain; François, Patrice; van der Mee-Marquet, Nathalie

    2017-02-01

    Reports of carbapenemase-producing Enterobacteriaceae in Africa remain rare and assess mostly bla OXA-48 -producing isolates from Mediterranean countries and South Africa. We identified bla NDM-7 -producing Enterobacteriaceae in Gabon in 2016. The isolates contained bla NDM-7 IncX3 plasmids that were unusual and similar to the one described in a colistin-resistant Klebsiella pneumoniae SZ04 isolate from China.

  8. Investigation of diversity of plasmids carrying the blaTEM-52 gene

    DEFF Research Database (Denmark)

    Bielak, Eliza Maria; Bergenholtz, Rikke D.; Jørgensen, Mikael Skaanning

    2011-01-01

    OBJECTIVES: To investigate the diversity of plasmids that carry blaTEM-52 genes among Escherichia coli and Salmonella enterica originating from animals, meat products and humans. METHODS: A collection of 22 blaTEM-52-encoding plasmids was characterized by restriction fragment length polymorphism...... of self-transfer to a plasmid-free E. coli recipient. CONCLUSIONS: The blaTEM-52 gene found in humans could have been transmitted on transferable plasmids originating from animal sources. Some of the blaTEM-52 plasmids carry replicons that differ from the classical ones. Two novel replicons were detected...

  9. Emergence and Evolution of Multidrug-Resistant Klebsiella pneumoniae with both blaKPC and blaCTX-M Integrated in the Chromosome

    OpenAIRE

    Huang, Weihua; Wang, Guiqing; Sebra, Robert; Zhuge, Jian; Yin, Changhong; Aguero-Rosenfeld, Maria E.; Schuetz, Audrey N.; Dimitrova, Nevenka; Fallon, John T.

    2017-01-01

    The extended-spectrum-β-lactamase (ESBL)- and Klebsiella pneumoniae carbapenemase (KPC)-producing Enterobacteriaceae represent serious and urgent threats to public health. In a retrospective study of multidrug-resistant K. pneumoniae, we identified three clinical isolates, CN1, CR14, and NY9, carrying both blaCTX-M and blaKPC genes. The complete genomes of these three K. pneumoniae isolates were de novo assembled by using both short- and long-read whole-genome sequencing. In CR14 and NY9, bla...

  10. Evolution of IncA/C blaCMY-₂-carrying plasmids by acquisition of the blaNDM-₁ carbapenemase gene.

    Science.gov (United States)

    Carattoli, Alessandra; Villa, Laura; Poirel, Laurent; Bonnin, Rémy A; Nordmann, Patrice

    2012-02-01

    The bla(NDM-1) gene has been reported to be often located on broad-host-range plasmids of the IncA/C type in clinical but also environmental bacteria recovered from the New Delhi, India, area. IncA/C-type plasmids are the main vehicles for the spread of the cephalosporinase gene bla(CMY-2), frequently identified in the United States, Canada, and Europe. In this study, we completed the sequence of IncA/C plasmid pNDM-KN carrying the bla(NDM-1) gene, recovered from a Klebsiella pneumoniae isolate from Kenya. This sequence was compared with those of three IncA/C-type reference plasmids from Escherichia coli, Yersinia ruckeri, and Photobacterium damselae. Comparative analysis showed that the bla(NDM-1) gene was located on a widely diffused plasmid scaffold known to be responsible for the spread of bla(CMY-2)-like genes and consequently for resistance to broad-spectrum cephalosporins. Considering that IncA/C plasmids possess a broad host range, this scaffold might support a large-scale diffusion of the bla(NDM-1) gene among Gram-negative rods.

  11. Enterobacter cloacae Complex Isolates Harboring blaNMC-A or blaIMI-Type Class A Carbapenemase Genes on Novel Chromosomal Integrative Elements and Plasmids.

    Science.gov (United States)

    Boyd, David A; Mataseje, Laura F; Davidson, Ross; Delport, Johannes A; Fuller, Jeff; Hoang, Linda; Lefebvre, Brigitte; Levett, Paul N; Roscoe, Diane L; Willey, Barbara M; Mulvey, Michael R

    2017-05-01

    Carbapenem-resistant Enterobacter cloacae complex isolates submitted to a reference laboratory from 2010 to 2015 were screened by PCR for seven common carbapenemase gene groups, namely, KPC, NDM, OXA-48, VIM, IMP, GES, and NMC-A/IMI. Nineteen of the submitted isolates (1.7%) were found to harbor Ambler class A bla NMC-A or bla IMI -type carbapenemases. All 19 isolates were resistant to at least one carbapenem but susceptible to aminoglycosides, trimethoprim-sulfamethoxazole, tigecycline, and ciprofloxacin. Most isolates (17/19) gave positive results with the Carba-NP test for phenotypic carbapenemase detection. Isolates were genetically diverse by pulsed-field gel electrophoresis macrorestriction analysis, multilocus sequence typing, and hsp60 gene analysis. The genes were found in various Enterobacter cloacae complex species; however, bla NMC-A was highly associated with Enterobacter ludwigii Whole-genome sequencing and bioinformatics analysis revealed that all NMC-A ( n = 10), IMI-1 ( n = 5), and IMI-9 ( n = 2) producers harbored the carbapenemase gene on EludIMEX-1-like integrative mobile elements (EcloIMEXs) located in the identical chromosomal locus. Two novel genes, bla IMI-5 and bla IMI-6 , were harbored on different IncFII-type plasmids. Enterobacter cloacae complex isolates harboring bla NMC-A/IMI -type carbapenemases are relatively rare in Canada. Though mostly found integrated into the chromosome, some variants are located on plasmids that may enhance their mobility potential. © Crown copyright 2017.

  12. Detection of blaOXA-23-like and blaNDM-1 in Acinetobacter baumannii from the Eastern Region, Saudi Arabia.

    Science.gov (United States)

    El-Mahdy, Taghrid S; Al-Agamy, Mohamed H; Al-Qahtani, Ahmed A; Shibl, Atef M

    2017-01-01

    Acinetobacter baumannii is currently considered as one of the most common successful pathogens in the healthcare system due to its ability to quickly develop resistance. Ten carbapenem-resistant A. calcoaceticus-baumannii complex were isolated from the eastern region, Saudi Arabia in 2014. All isolates were resistant to ciprofloxacin, however, 8 of 10 isolates were tigecycline resistant. Susceptibility test was also carried out for three aminoglycosides, resistance to gentamicin was 80%, amikacin was 90%, and tobramycin was 50%. Colistin susceptibility was seen in all isolates. The 10 isolates harbored bla OXA-23-like and ISAba1 and 9 of them also carried bla ADC . Three isolates of 10 harbored bla NDM-1 coding for NDM metallo-β-lactamase (MBL) with coexistence of bla ADC together with either bla GES or bla TEM or both. Those three isolates exhibited negative Etest MBL screening test. Pulsed-field gel electrophoresis revealed the high clonal variability of the isolates, although two isolates were indistinguishable. The risk of dissemination of carbapenem resistance through presence of ISAba1 upstream of OXA-23-like in all isolates raises the concern about emergence of higher carbapenem prevalence rates in the future in our region. This study also demonstrated the importance of molecular surveillance to provide accurate and reliable data about the resistance rates of A. baumannii. Finally, the high incidence of NDM-1 among our isolates requires a routine surveillance to monitor the future prevalence of this enzyme in the region.

  13. Occurrence of bla genes encoding carbapenem-resistant Pseudomonas aeruginosa and Acinetobacter baumannii from Intensive Care Unit in a tertiary care hospital.

    Science.gov (United States)

    Subramaniyan, Jayanthi Siva; Sundaram, Jeya Meenakshi

    2018-01-01

    ICU shows increasing incidence of infection associated with the use of invasive procedures for the diagnostic purpose as well as the indiscriminate use of antibiotics. Pseudomonas aeruginosa and Acinetobacter species are "very successful" pathogen and the emergence of the Metallo-β-Lactamases (MBL) is becoming a therapeutic challenge. To isolate the Nonfermenting Gram negative bacilli from the ICU samples. To identify the metallo betalactamase producers and to detect the bla gene presence among the Pseudomonas aeruginosa and Acinetobacter baumannii . The Nonfermenting Gram negative bacilli isolates from the ICU samples were taken over for 5 years (2009-2014) in a tertiary care hospital. The isolates of Pseudomonas species and Acinetobacter species were confirmed by API analyser and processed according to standard procedures. Detection of the MBL producers were done by E strip method and subjected for bla gene detection by PCR method. In our study a total of 195 isolates of NFGNB were obtained from various ICU. Of these MBL producers, 26 % were Pseudomonas aeruginosa and 25 % were Acinetobacter baumannii . The subtypes of bla VIM MBL producing P.aeruginosa were 26%. The predominant gene coding for MBL activity in A.baumannii were found to be bla OXA gene 11.9%. The gene accession numbers were KF975367, KF975372. We have to control the development and dissemination of these superbugs among the ICU's.

  14. The spread of bla OXA-48 and bla OXA-244 carbapenemase genes among Klebsiella pneumoniae, Proteus mirabilis and Enterobacter spp. isolated in Moscow, Russia.

    Science.gov (United States)

    Fursova, Nadezhda K; Astashkin, Eugeny I; Knyazeva, Anastasia I; Kartsev, Nikolay N; Leonova, Ekaterina S; Ershova, Olga N; Alexandrova, Irina A; Kurdyumova, Natalia V; Sazikina, Svetlana Yu; Volozhantsev, Nikolay V; Svetoch, Edward A; Dyatlov, Ivan A

    2015-11-02

    The spread of carbapenemase-producing Enterobacteriaceae (CPE) is a great problem of healthcare worldwide. Study of the spread for bla OXA-48-like genes coding epidemically significant carbapenemases among hospital pathogens is important for the regional and global epidemiology of antimicrobial resistance. Antibacterial resistant isolates of Klebsiella pneumoniae (n = 95) from 54 patients, P. mirabilis (n = 32) from 20 patients, Enterobacter aerogenes (n = 6) from four patients, and Enterobacter cloacae (n = 4) from four patients were collected from January, 2013 to October, 2014 in neurosurgical intensive care unit (ICU) of the Burdenko Neurosurgery Institute, Moscow. Characteristics of the isolates were done using susceptibility tests, PCR detection of the resistance genes, genotyping, conjugation, DNA sequencing, and bioinformatic analysis. Major strains under study were multi drug resistant (MDR), resistant to three or more functional classes of drugs simultaneously-98.9 % K. pneumoniae, 100 % P. mirabilis, one E. aerogenes isolate, and one E. cloacae isolate. Molecular-genetic mechanism of MDR in K. pneumoniae and P. mirabilis isolates were based on carrying of epidemic extended-spectrum beta-lactamase bla CTX-M-15 gene (87.2 and 90.6 % accordingly), carbapenemase bla OXA-48-like gene (55.3 and 23.3 % accordingly), and class 1 (54.8 and 31.3 % accordingly) and class 2 (90.6 % P. mirabilis) integrons. The bla OXA-48-like-positive K. pneumoniae were collected during whole two-year surveillance period, while P. mirabilis and Enterobacter spp. carrying bla OXA-48-like genes were detected only after four and 18 months after the research start, respectively. The bla OXA-48-like gene acquisition was shown for P. mirabilis isolates collected from five patients and for E. cloacae isolate collected from one patient during their stay in the ICU, presumably from bla OXA-48-like-positive K. pneumoniae. The source of the bla OXA-244 gene acquired by E

  15. Yersinia enterocolitica and Photorhabdus asymbiotica β-lactamases BlaA are exported by the twin-arginine translocation pathway.

    Science.gov (United States)

    Schriefer, Eva-Maria; Hoffmann-Thoms, Stephanie; Schmid, Franz X; Schmid, Annika; Heesemann, Jürgen

    2013-01-01

    In general, β-lactamases of medically important Gram-negative bacteria are Sec-dependently translocated into the periplasm. In contrast, β-lactamases of Mycobacteria spp. (BlaC, BlaS) and the Gram-negative environmental bacteria Stenotrophomonas maltophilia (L2) and Xanthomonas campestris (Bla(XCC-1)) have been reported to be secreted by the twin-arginine translocation (Tat) system. Yersinia enterocolitica carries 2 distinct β-lactamase genes (blaA and blaB) encoding BlaA(Ye) and the AmpC-like β-lactamase BlaB, respectively. By using the software PRED-TAT for prediction and discrimination of Sec from Tat signal peptides, we identified a functional Tat signal sequence for Yersinia BlaA(Ye). The Tat-dependent translocation of BlaA(Ye) could be clearly demonstrated by using a Y. enterocolitica tatC-mutant and cell fractionation. Moreover, we could demonstrate a unique unusual temperature-dependent activity profile of BlaA(Ye) ranging from 15 to 60 °C and a high 'melting temperature' (T(M)=44.3°) in comparison to the related Sec-dependent β-lactamase TEM-1 (20-50°C, T(M)=34.9 °C). Strikingly, the blaA gene of Y. enterocolitica is present in diverse environmental Yersinia spp. and a blaA homolog gene could be identified in the closely related Photorhabdus asymbiotica (BlaA(Pa); 69% identity to BlaA(Ye)). For BlaA(Pa) of P. asymbiotica, we could also demonstrate Tat-dependent secretion. These results suggest that Yersinia BlaA-related β-lactamases may be the prototype of a large Tat-dependent β-lactamase family, which originated from environmental bacteria. Copyright © 2012 Elsevier GmbH. All rights reserved.

  16. The Accuracy of 3D Optical Reconstruction and Additive Manufacturing Processes in Reproducing Detailed Subject-Specific Anatomy

    OpenAIRE

    Paolo Ferraiuoli; Jonathan C. Taylor; Emily Martin; John W. Fenner; Andrew J. Narracott

    2017-01-01

    3D reconstruction and 3D printing of subject-specific anatomy is a promising technology for supporting clinicians in the visualisation of disease progression and planning for surgical intervention. In this context, the 3D model is typically obtained from segmentation of magnetic resonance imaging (MRI), computed tomography (CT) or echocardiography images. Although these modalities allow imaging of the tissues in vivo, assessment of quality of the reconstruction is limited by the lack of a ref...

  17. Decreased Fitness and Virulence in ST10 Escherichia coli Harboring blaNDM-5 and mcr-1 against a ST4981 Strain with blaNDM-5

    Directory of Open Access Journals (Sweden)

    Yawei Zhang

    2017-06-01

    Full Text Available Although coexistence of blaNDM-5 and mcr-1 in Escherichia coli has been reported, little is known about the fitness and virulence of such strains. Three carbapenem-resistant Escherichia coli (GZ1, GZ2, and GZ3 successively isolated from one patient in 2015 were investigated for microbiological fitness and virulence. GZ1 and GZ2 were also resistant to colistin. To verify the association between plasmids and fitness, growth kinetics of the transconjugants were performed. We also analyzed genomic sequences of GZ2 and GZ3 using PacBio sequencing. GZ1 and GZ2 (ST10 co-harbored blaNDM-5 and mcr-1, while GZ3 (ST4981 carried only blaNDM-5. GZ3 demonstrated significantly more rapid growth (P < 0.001 and overgrew GZ2 with a competitive index of 1.0157 (4 h and 2.5207 (24 h. Increased resistance to serum killing and mice mortality was also identified in GZ3. While GZ2 had four plasmids (IncI2, IncX3, IncHI2, IncFII, GZ3 possessed one plasmid (IncFII. The genetic contexts of blaNDM-5 in GZ2 and GZ3 were identical but inserted into different backbones, IncX3 (102,512 bp and IncFII (91,451 bp, respectively. The growth was not statistically different between the transconjugants with mcr-1 or blaNDM-5 plasmid and recipient (P = 0.6238. Whole genome sequence analysis revealed that 28 virulence genes were specific to GZ3, potentially contributing to increased virulence of GZ3. Decreased fitness and virulence in a mcr-1 and blaNDM-5 co-harboring ST10 E. coli was found alongside a ST4981 strain with only blaNDM-5. Acquisition of mcr-1 or blaNDM-5 plasmid did not lead to considerable fitness costs, indicating the potential for dissemination of mcr-1 and blaNDM-5 in Enterobacteriaceae.

  18. Transcriptional analysis of bla NDM-1 and copy number alteration under carbapenem stress

    Directory of Open Access Journals (Sweden)

    Deepjyoti Paul

    2017-02-01

    Full Text Available Abstract Background New Delhi metallo beta-lactamase is known to compromise carbapenem therapy and leading to treatment failure. However, their response to carbapenem stress is not clearly known. Here, we have investigated the transcriptional response of bla NDM-1 and plasmid copy number alteration under carbapenem exposure. Methods Three bla NDM-1 harboring plasmids representing three incompatibility types (IncFIC, IncA/C and IncK were inoculated in LB broth with and without imipenem, meropenem and ertapenem. After each 1 h total RNA was isolated, immediately reverse transcribed into cDNA and quantitative real time PCR was used for transcriptional expression of bla NDM-1. Horizontal transferability and stability of the plasmids encoding bla NDM-1 were also determined. Changes in copy number of bla NDM-1 harboring plasmids under the exposure of different carbapenems were determined by real time PCR. Clonal relatedness among the isolates was determined by pulsed field gel electrophoresis. Results Under carbapenem stress over an interval of time there was a sharp variation in the transcriptional expression of bla NDM-1 although it did not follow a specific pattern. All bla NDM-1 carrying plasmids were transferable by conjugation. These plasmids were highly stable and complete loss was observed between 92nd to 96th serial passages when antibiotic pressure was withdrawn. High copy number of bla NDM-1 was found for IncF type plasmids compared to the other replicon types. Conclusion This study suggests that the single dose of carbapenem pressure does not significantly influence the expression of bla NDM-1 and also focus on the stability of this gene as well as the change in copy number with respect to the incompatible type of plasmid harboring resistance determinant.

  19. Dissemination of blaOXA-58 in Proteus mirabilis isolates from Germany.

    Science.gov (United States)

    Lange, Felix; Pfennigwerth, Niels; Gerigk, Sonja; Gohlke, Frank; Oberdorfer, Klaus; Purr, Ingvill; Wohanka, Nikolaus; Roggenkamp, Andreas; Gatermann, Sören G; Kaase, Martin

    2017-05-01

    Characterization of Proteus mirabilis isolates harbouring bla OXA-58 with emphasis on the genetic environment of this resistance determinant. Strains of P. mirabilis ( n  =   37) isolated from different patients were tested for the presence of bla OXA-58 . The genetic context of bla OXA-58 was determined by WGS of two strains and Sanger sequencing. Clonality of the strains was assessed by PFGE. Susceptibility testing was performed by microdilution according to EUCAST. Four strains isolated in different geographical regions of Germany were positive for bla OXA-58 , and WGS showed that this resistance gene was harboured on a plasmid. Sanger sequencing confirmed the presence of two nearly identical plasmids, 6219 and 6208 bp in size, in all four strains. Upstream of bla OXA-58 an IS Aba 3-like transposase gene was located. The P. mirabilis strains were not clonally related according to PFGE. MICs of meropenem for three of the strains were only just above the EUCAST breakpoint and the Carba NP test was positive for only two of the strains. To our knowledge, this is the first description of bla OXA-58 in the species P. mirabilis . The resistance gene is harboured by almost identical plasmids in strains not clonally related and from different geographical regions. Apart from an IS Aba 3-like transposase gene upstream of bla OXA-58 the genetic context is different from bla OXA-58 harboured on plasmids in the genus Acinetobacter . With MICs of meropenem well below the EUCAST breakpoint or only just above it and equivocal or false negative results from the Carba NP test, bla OXA-58 can be easily overlooked in P. mirabilis . © The Author 2017. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  20. Diversity and evolution of blaZ from Staphylococcus aureus and coagulase-negative staphylococci

    DEFF Research Database (Denmark)

    Olsen, John E.; Christensen, Henrik; Aarestrup, Frank Møller

    2006-01-01

    and sequences retrieved from public databases were compared. A phylogenetic tree showed that blaZ exists in three evolutionary lines: one group was of plasmid origin, one group was of chromosomal origin and one intermediate group. Sixty-nine sequence types were demonstrated. They translated into 11 BlaZ protein...... types. The major types all contained strains of both human and bovine origin, and more than one Staphylococcus species, demonstrating a shared gene pool. In a comparison of S. aureus and CoNS obtained from five Danish cattle herds, the same type of blaZ was only detected in one case. Conclusions...

  1. Tribology in Manufacturing Technology

    CERN Document Server

    2013-01-01

    The present book aims to provide research advances on tribology in manufacturing technology for modern industry. This book can be used as a research book for final undergraduate engineering course (for example, mechanical, manufacturing, materials, etc) or as a subject on manufacturing at the postgraduate level. Also, this book can serve as a useful reference for academics, manufacturing and tribology researchers, mechanical, mechanical, manufacturing and materials engineers, professionals in related industries with manufacturing and tribology.

  2. Detection of bla-IMP-1 and bla-IMP-2 Genes Among Metallo-β-lactamase-Producing Pseudomonas Aeruginosa Isolated from Burn Patients in Isfahan

    Directory of Open Access Journals (Sweden)

    M. Pourbabaee

    2016-02-01

    Full Text Available Background: Pseudomonas aeruginosa is a nosocomial pathogen which especially causes infections among burn patients. Carbapenems are extensively used for the treatment of infections caused by multidrug-resistant P. aeruginosa isolates. The emergence of carbapenemases producing isolates is an outcome of increased utilization of carbapenems. The aim of this study was to determine the bla-IMP-1 and bla-IMP-2 genes in metallo-β-lactamase (MBL -producing Pseudomonas aeruginosa isolated from burn patients in Isfahan. Material and Methods: A total of 150 P. aeruginosa were isolated from burn patients hospitalized in Imam-Mousakazem hospital in Isfahan. Antimicrobial susceptibility was determined using disk diffusion method according to the Clinical and Laboratory Standards Institute (CLSI guidelines. Double Disk Synergy Test (DDST was carried out for screening of MBL production in imipenem-resistant strains. PCR assays were used for detection of bla-IMP-1 and bla-IMP-2 genes among metallo-β-lactamase-producing Pseudomonas aeruginosa isolates. The purified PCR products were sequenced. Results: Of 150 Pseudomonas aeruginosa isolates, %100 identified as multi-drug resistant strains. The most resistance rates were seen against ciprofloxacin, tobromycin, meropenem and imipenem. All of 144 imipenem-resistant Pseudomonas aeruginosa isolates were MBL producing by DDST test. Twenty-nine (19.3% and 8(5.3% MBL producing Pseudomonas aeruginosa isolates harbored bla-IMP-1 and bla-IMP-2 genes respectively. Conclusions: According to results of this study high level resistance to imipenem and MBl genes carriage was seen among Pseudomonas aeruginosa isolated from burn patient infections in our region.

  3. Differential Binding of Co(II) and Zn(II) to Metallo-beta-Lactamase Bla2 from Bacillus anthracis

    Energy Technology Data Exchange (ETDEWEB)

    Hawk, M.; Breece, R; Hajdin, C; Bender, K; Hu, Z; Costello, A; Bennett, B; Tierney, D; Crowder, M

    2009-01-01

    In an effort to probe the structure, mechanism, and biochemical properties of metallo-{beta}-lactamase Bla2 from Bacillus anthracis, the enzyme was overexpressed, purified, and characterized. Metal analyses demonstrated that recombinant Bla2 tightly binds 1 equiv of Zn(II). Steady-state kinetic studies showed that mono-Zn(II) Bla2 (1Zn-Bla2) is active, while di-Zn(II) Bla2 (ZnZn-Bla2) was unstable. Catalytically, 1Zn-Bla2 behaves like the related enzymes CcrA and L1. In contrast, di-Co(II) Bla2 (CoCo-Bla2) is substantially more active than the mono-Co(II) analogue. Rapid kinetics and UV-vis, 1H NMR, EPR, and EXAFS spectroscopic studies show that Co(II) binding to Bla2 is distributed, while EXAFS shows that Zn(II) binding is sequential. To our knowledge, this is the first documented example of a Zn enzyme that binds Co(II) and Zn(II) via distinct mechanisms, underscoring the need to demonstrate transferability when extrapolating results on Co(II)-substituted proteins to the native Zn(II)-containing forms.

  4. First report of blaNDM-1-producing Acinetobacter baumannii isolated in Lebanon from civilians wounded during the Syrian war.

    Science.gov (United States)

    Rafei, Rayane; Dabboussi, Fouad; Hamze, Monzer; Eveillard, Matthieu; Lemarié, Carole; Mallat, Hassan; Rolain, Jean-Marc; Joly-Guillou, Marie-Laure; Kempf, Marie

    2014-04-01

    The emergence of carbapenem-resistant Acinetobacter baumannii has been observed worldwide. We describe the first detection of A. baumannii carrying the blaNDM-1 gene in Lebanon, isolated from Syrian patients wounded during the civil war. Four carbapenem-resistant A. baumannii strains isolated in 2012 in the Tripoli Government Hospital, Lebanon, from civilians wounded during the Syrian war, were analysed. Susceptibility was determined by disk diffusion testing, and resistance to carbapenems was confirmed by Etest. The presence of blaOXA-23-like, blaOXA-24-like, blaOXA-58-like, blaOXA-143-like, and blaNDM was investigated by PCR. Clonal relationships were studied by pulsed-field gel electrophoresis (PFGE), multilocus sequence typing (MLST), and blaOXA-51 sequence-based typing. All isolates harboured the blaNDM-1 gene and were negative for other tested carbapenemases. They all belonged to the sequence type 85 and formed a single cluster by PFGE. Finally, blaOXA-51-like gene sequencing revealed the presence of the blaOXA-94 variant in all four isolates. These findings show that Syria constitutes a reservoir for NDM-1-producing bacteria. These results also highlight the need for effective measures to stop the threatening spread of such strains. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

  5. Dissemination of metallo-β-lactamase in Pseudomonas aeruginosa isolates in Egypt: mutation in blaVIM-4.

    Science.gov (United States)

    Hashem, Hany; Hanora, Amro; Abdalla, Salah; Shaeky, Alaa; Saad, Alaa

    2017-05-01

    This study was designed to investigate the prevalence of metallo-β-lactamase (MBL) in Pseudomonas aeruginosa isolates collected from Suez Canal University Hospital in Ismailia, Egypt. Antibiotic susceptibility testing and phenotypic and genotypic screening for MBLs were performed on 147 isolates of P. aeruginosa. MICs were determined by agar dilution method for carbapenem that was ≥2 μg/mL for meropenem. MBL genes were detected by multiplex and monoplex PCR for P. aeruginosa-harbored plasmids. Mutation profile of sequenced MBL genes was screened using online software Clustal Omega. Out of 147 P. aeruginosa, 39 (26.5%) were carbapenem-resistant isolates and 25 (64%) were confirmed to be positive for MBLs. The susceptibility rate of P. aeruginosa toward polymyxin B and norfloxacin was 99% and 88%, respectively. Identification of collected isolates by API analysis and constructed phylogenetic tree of 16S rRNA showed that the isolates were related to P. aeruginosa species. The frequency of blaGIM-1, blaSIM-1, and blaSPM-1 was 52%, 48%, and 24%, respectively. BlaVIM and blaIMP-like genes were 20% and 4% and the sequences confirm the isolate to be blaVIM-1, blaVIM-2, blaVIM-4, and blaIMP-1. Three mutations were identified in blaVIM-4 gene. Our study emphasizes the high occurrence of multidrug-resistant P. aeruginosa-producing MBL enzymes. © 2017 APMIS. Published by John Wiley & Sons Ltd.

  6. Dissemination of imipenem-resistant Acinetobacter baumannii with new plasmid-borne bla(OXA-72) in Taiwan.

    Science.gov (United States)

    Kuo, Shu-Chen; Yang, Su-Pen; Lee, Yi-Tzu; Chuang, Han-Chuan; Chen, Chien-Pei; Chang, Chi-Ling; Chen, Te-Li; Lu, Po-Liang; Hsueh, Po-Ren; Fung, Chang-Phone

    2013-07-13

    The systemic surveillance of imipenem-resistant Acinetobacter baumannii (IRAB) from multicenters in Taiwan revealed the emergence of isolates with bla(OXA-72). This study described their genetic makeup, mechanism of spread, and contribution to carbapenem resistance. Two hundred and ninety-one non-repetitive isolates of A. baumannii were collected from 10 teaching hospitals from different geographical regions in Taiwan from June 2007 to September 2007. Minimal inhibitory concentrations (MICs) were determined by agar dilution. Clonality was determined by pulsed-field gel electrophoresis. Plasmid was extracted and digested by restriction enzymes, and subsequently analyzed by electrophoresis and Southern blot for bla(OXA-72). The flanking regions of bla(OXA-72) were determined by inverse PCR. The contribution of bla(OXA-72) to imipenem MIC was determined by transforming plasmids carrying bla(OXA-72) into imipenem-susceptible A. baumannii. Among 142 IRAB in Taiwan, 27 harbored bla(OXA-72); 22 originated from Southern Taiwan, 5 from Central Taiwan, and none from Northern Taiwan. There were two major clones. The bla(OXA-72) was identified in the plasmids of all isolates. Two genetic structures flanking plasmid-borne bla(OXA-72) were identified and shared identical sequences in certain regions; the one described in previous literature was present in only one isolate, and the new one was present in the remaining isolates. Introduction of bla(OXA-72) resulted in an increase of imipenem MIC in the transformants. The overexpression of bla(OXA-72) mRNA in response to imipenem further supported the contribution of bla(OXA-72). In conclusion, isolates with new plasmid-borne blaOXA-72 were found to be disseminated successfully in Southern Taiwan. The spread of the resistance gene depended on clonal spread and dissemination of a new plasmid. Bla(OXA-72) in these isolates directly led to their imipenem-resistance.

  7. First Identification of a Patient Colonized With Klebsiella pneumoniae Carrying blaNDM-1 in Taiwan

    Directory of Open Access Journals (Sweden)

    Hua-Shin Wu

    2010-11-01

    Full Text Available New Delhi metallo-β-lactamase 1 (NDM-1 is a novel type of metallo-β-lactamase (MBL. Enterobacteriaceae carrying this NDM-1 encoding gene, blaNDM-1, have been identified worldwide. Bacteria carrying blaNDM-1 are not only resistant to carbapenem, but also highly resistant to many classes of antibiotics, which indicate the importance of prompt identification of these bacteria and implementation of strict infection control measures to prevent their transmission. Here, we report the first identification and management of a patient colonized with Klebsiella pneumoniae carrying blaNDM-1 in Taiwan, who returned from New Delhi where he had been hospitalized for a gun-shot injury.

  8. ZrO2/bamboo leaves ash (BLA) Catalyst in Biodiesel Conversion of Rice Bran Oil

    Science.gov (United States)

    Fatimah, Is; Taushiyah, Ana; Badriatun Najah, Fitri; Azmi, Ulil

    2018-04-01

    Preparation, characterization and catalytic activity of ZrO2/bamboo leaves ash (BLA) catalyst for conversion of rice bran oil to biodiesel have been investigated. The catalyst was prepared by impregnation method of ZrOCl2 as ZrO2 precursor with BLA at a theoretical content of 20% wt. followed by calcination. The physicochemical properties of the catalyst material were characterized by x-ray diffraction (XRD), FTIR and surface acidity measurement. Activity test of materials in biodiesel conversion of rice bran oil was used by reflux method and microwave (MW) assisted method. Reaction variables studied in the investigation were the effect of catalyst weight and time of MW irradiation compared with the use reflux method. The results showed that ZrO2/BLA catalyst exhibited competitively effective and efficient processes for the production of biodiesel. The reflux method demonstrated an higher conversion (%) compared to MW method, however MW method showed the better reusable properties.

  9. Isolation, Antimicrobial Susceptibility Profile and Detection of Sul1, blaTEM, and blaSHV in Amoxicillin-Clavulanate-Resistant Bacteria Isolated From Retail Sausages in Kampar, Malaysia.

    Science.gov (United States)

    Tew, Lih-Shin; She, Li-Yen; Chew, Choy-Hoong

    2016-10-01

    Due to the overuse of antibiotics in livestock as a growth-promoting agent, the emergence of multi-antibiotic resistant bacteria is becoming a concern. In this study, we aimed to detect the presence and discover the molecular determinants of foodborne bacteria in retail sausages resistant towards the antibacterial agent amoxicillin-clavulanate. Two grams of sausages were chopped into small pieces and transferred into sterile Luria-Bertani (LB) enrichment broths overnight before they were plated on MacConkey agar petri dishes. The bacteria isolated were then screened for amoxicillin-clavulanate resistance, and an antimicrobial susceptibility test of each isolate was performed by using the disc diffusion method. Double synergy and phenotypic tests were carried out to detect the presence of extended spectrum β-lactamase (ESBL). API 20E kit was used to identify the Enterobacteriaceae . All isolates were further examined by polymerase chain reaction (PCR) for resistant genes bla OXA-1, bla OXA-10, plasmid-mediated AmpC ( bla CMY and bla DHA), and the chromosome-mediated AmpC, Sul 1, bla TEM, and bla SHV genes. A total of 18 amoxicillin-clavulanate resistant isolates were obtained from seven different types of retail sausages. Only half of them were identified as Enterobacteriaceae , but none were ESBL-producers. All the 18 isolated strains demonstrated resistance towards amoxicillin-clavulanate, penicillin and oxacillin (100%), cefotaxime (71.4%), cefpodoxime (66.7%), and ampicillin (83.3%). bla TEM was the most frequently detected β-lactamase gene. Both plasmid- and chromosomal-bound bla TEM genes were detected in all of the isolated Enterobacteriaceae . bla SHV and Sul 1 accounted for 22.2% and 11.1% of the amoxicillin-clavulanate resistant isolates, respectively, whereas bla AMPC, bla CMY, bla DHA, bla OXA-1, and bla OXA-10 were not found in any of the isolates. The only one ESBL-producing bacteria detected in this study was Chryseobacterium meningosepticum , which

  10. Isolation, Antimicrobial Susceptibility Profile and Detection of Sul1, blaTEM, and blaSHV in Amoxicillin-Clavulanate-Resistant Bacteria Isolated From Retail Sausages in Kampar, Malaysia

    Science.gov (United States)

    Tew, Lih-Shin; She, Li-Yen; Chew, Choy-Hoong

    2016-01-01

    Background Due to the overuse of antibiotics in livestock as a growth-promoting agent, the emergence of multi-antibiotic resistant bacteria is becoming a concern. Objectives In this study, we aimed to detect the presence and discover the molecular determinants of foodborne bacteria in retail sausages resistant towards the antibacterial agent amoxicillin-clavulanate. Methods Two grams of sausages were chopped into small pieces and transferred into sterile Luria-Bertani (LB) enrichment broths overnight before they were plated on MacConkey agar petri dishes. The bacteria isolated were then screened for amoxicillin-clavulanate resistance, and an antimicrobial susceptibility test of each isolate was performed by using the disc diffusion method. Double synergy and phenotypic tests were carried out to detect the presence of extended spectrum β-lactamase (ESBL). API 20E kit was used to identify the Enterobacteriaceae. All isolates were further examined by polymerase chain reaction (PCR) for resistant genes blaOXA-1, blaOXA-10, plasmid-mediated AmpC (blaCMY and blaDHA), and the chromosome-mediated AmpC, Sul1, blaTEM, and blaSHV genes. Results A total of 18 amoxicillin-clavulanate resistant isolates were obtained from seven different types of retail sausages. Only half of them were identified as Enterobacteriaceae, but none were ESBL-producers. All the 18 isolated strains demonstrated resistance towards amoxicillin-clavulanate, penicillin and oxacillin (100%), cefotaxime (71.4%), cefpodoxime (66.7%), and ampicillin (83.3%). blaTEM was the most frequently detected β-lactamase gene. Both plasmid- and chromosomal-bound blaTEM genes were detected in all of the isolated Enterobacteriaceae. blaSHV and Sul1 accounted for 22.2% and 11.1% of the amoxicillin-clavulanate resistant isolates, respectively, whereas blaAMPC, blaCMY, blaDHA, blaOXA-1, and blaOXA-10 were not found in any of the isolates. The only one ESBL-producing bacteria detected in this study was Chryseobacterium

  11. Prevalencia de bacterias Gram negativas portadoras del gen blaKPC en hospitales de Colombia

    Directory of Open Access Journals (Sweden)

    Robinson Pacheco

    2014-04-01

    Full Text Available Introducción. Las enzimas carbapenemasas de tipo KPC tienen gran capacidad de diseminación, son causantes de epidemias y se asocian a mayor mortalidad y estancia hospitalaria. En Colombia se han venido reportando cada vez más desde 2007, pero se desconoce la prevalencia hospitalaria. Objetivo. Estimar la prevalencia hospitalaria del gen blaKPC. Materiales y métodos. Se evaluó la presencia del gen blaKPC y su ‘clonalidad’ en aislamientos de enterobacterias y Pseudomonas aeruginosa de pacientes hospitalizados. Resultados. De los 424 aislamientos evaluados durante el periodo de estudio, 273 cumplieron con criterios de elegibilidad, 31,1 % fue positivo para el gen blaKPC y, al ajustar por ‘clonalidad’, la positividad fue de 12,8 %. El gen blaKPC se encontró con mayor frecuencia en Klebsiella pneumoniae seguido de P. aeruginosa y otras enterobacterias. A pesar de que la unidad de cuidados intensivos aportó el mayor número de aislamientos, no se encontró un patrón más prevalente del gen blaKPC en las ellas que en las otras salas. El aparato respiratorio fue el sitio anatómico de origen con la mayor prevalencia. No se presentó estacionalidad en la frecuencia de los aislamientos portadores del gen blaKPC. Conclusión. Este estudio reveló la alta prevalencia del gen blaKPC en diferentes microorganismos aislados en varias instituciones hospitalarias del país. La extraordinaria capacidad de propagación del gen blaKPC, las dificultades del diagnóstico y la limitada disponibilidad de antibióticos plantean la apremiante necesidad de fortalecer los sistemas de vigilancia epidemiológica y ajustar oportunamente las políticas institucionales de uso racional de antibióticos con el fin de contener su diseminación a otras instituciones de salud del país.

  12. Prevalencia de bacterias Gram negativas portadoras del gen blaKPC en hospitales de Colombia

    OpenAIRE

    Robinson Pacheco; Lyda Osorio; Adriana M. Correa; Maria Virginia Villegas

    2014-01-01

    Introducción. Las enzimas carbapenemasas de tipo KPC tienen gran capacidad de diseminación, son causantes de epidemias y se asocian a mayor mortalidad y estancia hospitalaria. En Colombia se han venido reportando cada vez más desde 2007, pero se desconoce la prevalencia hospitalaria. Objetivo. Estimar la prevalencia hospitalaria del gen blaKPC. Materiales y métodos. Se evaluó la presencia del gen blaKPC y su ‘clonalidad’ en aislamientos de enterobacterias y Pseudomonas aeruginosa de p...

  13. Blaženje podnebnih sprememb z uporabo geoinženiringa

    OpenAIRE

    Horvat, Sanja

    2015-01-01

    V diplomski nalogi se osredotočamo na vrednotenje dveh znanosti, znanosti o podnebnih spremembah in znanosti o geoinženiringu, katerega osnovni namen je blaženje podnebnih sprememb. Diplomska naloga je razdeljena na dva dela. V prvem delu podrobneje razglabljamo o znanosti in politiki podnebnih sprememb ter njihovem orodju (o t.i. klimatskih modelih), s katerim operiramo in napovedujemo razvoj podnebnih sprememb, na podlagi katerih se sprejemajo radikalne družbenopolitične odločitve za blažen...

  14. Emergence of carbapenem resistant Escherichia coli isolates producing blaNDM and blaOXA-48-like carried on IncA/C and IncL/M plasmids at two Iranian university hospitals.

    Science.gov (United States)

    Solgi, Hamid; Giske, Christian G; Badmasti, Farzad; Aghamohammad, Shadi; Havaei, Seyed Asghar; Sabeti, Shahram; Mostafavizadeh, Kamyar; Shahcheraghi, Fereshteh

    2017-11-01

    The emergence of carbapenem resistance among Escherichia coli is a serious threat to public health. The objective of this study was to investigate resistance genes and clonality of carbapenem resistant E. coli in Iran. Between February 2015 and July 2016, a total of 32 non-duplicate E. coli isolates that were ertapenem resistant or intermediate (R/I-ETP) were collected from patient clinical or surveillance cultures (rectal swabs) at two university hospitals. Resistance genes were identified by PCR and sequencing. Conjugation experiments, PCR-based replicon typing, PFGE and multilocus sequence typing (MLST) were performed. PCR assays showed, among the 32 isolates, twenty-nine strains produced carbapenemase genes. The predominant carbapenemase was bla OXA-48 (82.8%), followed by bla NDM-1 (31%), bla NDM-7 (6.9%) and bla OXA-181 (3.4%). Seven of the bla NDM positive isolates co-harbored bla OXA-48 carbapenemases. The bla NDM and bla OXA-48 were found in IncA/C and IncL/M conjugative plasmids, respectively. The bla CTX-M-15 , qnrA and intI1 genes were also present in most isolates. The PFGE revealed genetic diversity among the 28 E. coli isolates, which belonged to six minor PFGE clusters and 14 isolates were singletons. The 26 isolates were distributed into 18 STs, of which two were dominant (ST648 and ST167). We identified one bla NDM-1 -positive ST131 E. coli isolates that harbor the bla CTX-M-15 and bla TEM genes. Horizontal transfer of IncA/C and IncL/M plasmids has likely facilitated the spread of the bla OXA-48 and bla NDM genes among E. coli. Their clonal diversity and the presence of faecal carriers in isolates suggest an endemic spread of OXA-48 and NDM. Therefore, it emphasizes the critical importance of monitoring and controlling the spread of carbapenem resistant E. coli. Copyright © 2017. Published by Elsevier B.V.

  15. Functional blaKPC-2 sequences are present in United States beef cattle feces regardless of antibiotic use

    Science.gov (United States)

    Recently, using quantitative PCR (qPCR) we detected blaKPC-2 in metagenomic DNA (mgDNA) prepared from the feces of 36 lots beef cattle "raised without antibiotics" (RWA) and 36 lots raised "conventionally" (CONV). Since a small internal fragment of the blaKPC-2 gene was targeted we sought to confirm...

  16. Australian Indigenous Students' Performance on the PIPS-BLA Reading and Mathematics Scales: 2011-2013

    Science.gov (United States)

    Styles, Irene; Wildy, Helen; Pepper, Vivienne; Faulkner, Joanne; Berman, Ye'Elah

    2014-01-01

    The assessment of literacy and numeracy skills of students as they enter school for the first time is not yet established nation-wide in Australia. However, a large proportion of primary schools have chosen to assess their starting students on the Performance Indicators in Primary Schools-Baseline Assessment (PIPS-BLA). This series of three…

  17. Detection of New Delhi Metallo-Beta-Lactamase (Encoded by blaNDM-1 ) in Enterobacter aerogenes in China.

    Science.gov (United States)

    Shen, Yong; Xiao, Wei-Qiang; Gong, Jiao-Mei; Pan, Jun; Xu, Qing-Xia

    2017-03-01

    The increase in bla NDM -1 in Enterobacteriaceae has become a major concern worldwide. In previous study, we investigated clonal dissemination and mechanisms of resistance to carbapenem in China. We carried out retrospective surveillance for bla NDM -1 among carbapenem-resistant enterobacter strains, which were isolated from patients at our hospital by bacterial strains selection, antimicrobial susceptibility testing, species identification, and molecular detection of resistance gene. We found three bla NDM -1 -positive isolates which were identified as Enterobacter aerogenes in clinical patients in China. The bla NDM -1 -positive Enterobacter aerogenes isolates were first found. It is important to mandate prudent usage of antibiotics and implement infection control measures to control the spread of these resistant bla NDM -1 -positive strains. © 2016 Wiley Periodicals, Inc.

  18. Mechanisms Involved in Acquisition of blaNDM Genes by IncA/C2 and IncFIIY Plasmids.

    Science.gov (United States)

    Wailan, Alexander M; Sidjabat, Hanna E; Yam, Wan Keat; Alikhan, Nabil-Fareed; Petty, Nicola K; Sartor, Anna L; Williamson, Deborah A; Forde, Brian M; Schembri, Mark A; Beatson, Scott A; Paterson, David L; Walsh, Timothy R; Partridge, Sally R

    2016-07-01

    blaNDM genes confer carbapenem resistance and have been identified on transferable plasmids belonging to different incompatibility (Inc) groups. Here we present the complete sequences of four plasmids carrying a blaNDM gene, pKP1-NDM-1, pEC2-NDM-3, pECL3-NDM-1, and pEC4-NDM-6, from four clinical samples originating from four different patients. Different plasmids carry segments that align to different parts of the blaNDM region found on Acinetobacter plasmids. pKP1-NDM-1 and pEC2-NDM-3, from Klebsiella pneumoniae and Escherichia coli, respectively, were identified as type 1 IncA/C2 plasmids with almost identical backbones. Different regions carrying blaNDM are inserted in different locations in the antibiotic resistance island known as ARI-A, and ISCR1 may have been involved in the acquisition of blaNDM-3 by pEC2-NDM-3. pECL3-NDM-1 and pEC4-NDM-6, from Enterobacter cloacae and E. coli, respectively, have similar IncFIIY backbones, but different regions carrying blaNDM are found in different locations. Tn3-derived inverted-repeat transposable elements (TIME) appear to have been involved in the acquisition of blaNDM-6 by pEC4-NDM-6 and the rmtC 16S rRNA methylase gene by IncFIIY plasmids. Characterization of these plasmids further demonstrates that even very closely related plasmids may have acquired blaNDM genes by different mechanisms. These findings also illustrate the complex relationships between antimicrobial resistance genes, transposable elements, and plasmids and provide insights into the possible routes for transmission of blaNDM genes among species of the Enterobacteriaceae family. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

  19. Isolation of Enterobacter aerogenes carrying blaTEM-1 and blaKPC-3 genes recovered from a hospital Intensive Care Unit.

    Science.gov (United States)

    Pulcrano, Giovanna; Pignanelli, Salvatore; Vollaro, Adriana; Esposito, Matilde; Iula, Vita Dora; Roscetto, Emanuela; Soriano, Amata Amy; Catania, Maria Rosaria

    2016-06-01

    Enterobacter aerogenes has recently emerged as an important hospital pathogen. In this study, we showed the emergence of E. aerogenes isolates carrying the blaKPC gene in patients colonized by carbapenem-resistant Klebsiella pneumoniae strains. Two multiresistant E. aerogenes isolates were recovered from bronchial aspirates of two patients hospitalized in the Intensive Care Unit at the "Santa Maria della Scaletta" Hospital, Imola. The antimicrobial susceptibility test showed the high resistance to carbapenems and double-disk synergy test confirmed the phenotype of KPC and AmpC production. Other investigation revealed that ESBL and blaKPC genes were carried on the conjugative pKpQIL plasmid. This is a relevant report in Italy that describes a nosocomial infection due to the production of KPC beta-lactamases by an E. aerogenes isolate in patients previously colonized by K. pneumoniae carbapenem-resistant. In conclusion, it's necessary a continuous monitoring of multidrug-resistant strains for the detection of any KPC-producing bacteria that could expand the circulation of carbapenem-resistant pathogens. © 2016 APMIS. Published by John Wiley & Sons Ltd.

  20. Clonal spread of blaOXA-72-carrying Acinetobacter baumannii sequence type 512 in Taiwan.

    Science.gov (United States)

    Kuo, Han-Yueh; Hsu, Po-Jui; Chen, Jiann-Yuan; Liao, Po-Cheng; Lu, Chia-Wei; Chen, Chang-Hua; Liou, Ming-Li

    2016-07-01

    This is the first report to show an insidious outbreak of armA- and blaOXA-72-carrying Acinetobacter baumannii sequence type 512 (ST512) at a study hospital in northern Taiwan. Multilocus sequence typing revealed that this was a ST512 clone. All of the isolates with ST512 carried a novel 12,056-bp repGR2 in combination with a repGR12-type plasmid. This plasmid, designated pAB-ML, had one copy of the blaOXA-72 gene that was flanked by XerC/XerD-like sites and conferred resistance to carbapenems. Copyright © 2016 Elsevier B.V. and International Society of Chemotherapy. All rights reserved.

  1. blaGES carrying Pseudomonas aeruginosa isolates from a public hospital in Rio de Janeiro, Brazil

    Directory of Open Access Journals (Sweden)

    Flávia L. P. C. Pellegrino

    Full Text Available Previous analysis of Pseudomonas aeruginosa class-1 integrons from Rio de Janeiro, Brazil, revealed the blaGES gene in one isolate. We screened isolates of two widespread PFGE genotypes, A and B, at a public hospital in Rio, for the presence of blaGES. The gene was detected in all seven P. aeruginosa isolates belonging to genotype B. Three of the seven genotype-B isolates were resistant to amikacin, aztreonam, ceftazidime, cefepime, ciprofloxacin, gentamicin, imipenem, meropenem, piperacillin-tazobactam and ticarcillin-clavulanic acid. The other four isolates were resistant to all these agents, except gentamicin, imipenem, meropenem and piperacillin-tazobactam. A synergistic effect between ceftazidime and imipenem or clavulanic acid suggested the production of GES-type ESBL.

  2. First case of bacteraemia due to Acinetobacter schindleri harbouring blaNDM-1 in an immunocompromised patient

    Directory of Open Access Journals (Sweden)

    S. Montaña

    2018-01-01

    Full Text Available Clinically significant NDM-1-producing Acinetobacter schindleri has not yet been described in the literature. We report the first case of bacteraemia due to an A. schindleri strain harbouring blaNDM-1 recovered from an immunocompromised patient. Our report reinforces the fact that NDM-1 can easily be acquired by Acinetobacter species. Keywords: Acinetobacter schindleri, bacteraemia, blaNDM-1, clinically significant isolate, immunocompromised patient

  3. Manufacturing Initiative

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Manufacturing Technologies (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of...

  4. Delayed identification of Acinetobacter baumannii during an outbreak owing to disrupted blaOXA-51-like by ISAba19.

    Science.gov (United States)

    Ahmadi, Amjad; Salimizand, Himen

    2017-07-01

    Early detection of Acinetobacter baumannii, an emerging pathogen in hospital settings, is of interest. The bla OXA-51-like family had been used as a marker to detect A. baumannii. During an infection outbreak, 14 isolates produced a 1.7-kb PCR band instead of 353 bp for this marker. This work sought the reasons behind the increased marker size. Characterisation of isolates was done by API-20NE, gyrB multiplex PCR and 16S-23S rRNA ITS sequencing. The 1.7-kb band generated and the complete bla OXA-51-like variant were sequenced to find the probable integrated element. Susceptibility testing to various antimicrobials was performed by microdilution. bla OXA-like , metallo-β-lactamases (MBLs), the ISAba1 element and the presence of ISAba1 adjacent to bla OXA-like were sought. rep-PCR, global clonal (GC) lineage determination and multilocus sequence typing (MLST) were performed to analyse the relationship among isolates. Isolates were characterised as Acinetobacter baumannii-calcoaceticus complex by API-20NE. gyrB multiplex PCR and 16S-23S ITS sequencing verified the isolates as A. baumannii. Sequencing of the 1.7-kb band revealed ISAba19 as the disrupting element. The bla OXA-51 variant was bla OXA-66 , which was elongated to 2.2 kb due to ISAba19. The bla OXA-23-like family was found in 67% of isolates. MBL genes were not detected; however, ISAba1-bla OXA-23-like was characterised in carbapenem-resistant isolates (53%; 8/15). Isolates were divided into three clusters by rep-PCR. All strains were ST2 and all but one belonged to GC II. Identification of A. baumannii based only on bla OXA-51-like is not reliable. Besides bla OXA-51-like , multiplex PCR of gyrB and rpoB could provide rapid and cost-effective results. Copyright © 2017 Elsevier B.V. and International Society of Chemotherapy. All rights reserved.

  5. Social manufacturing

    OpenAIRE

    Hamalainen, Markko; Karjalainen, Jesse

    2017-01-01

    New business models harnessing the power of individuals have already revolutionized service industries and digital content production. In this study, we investigate whether a similar phenomenon is taking place in manufacturing industries. We start by conceptually defining two distinct forms of firm-individual collaboration in manufacturing industries: (1) social cloud manufacturing, in which firms outsource manufacturing to individuals, and (2) social platform manufacturing, in which firms pr...

  6. Chromosomal Amplification of the blaOXA-58 Carbapenemase Gene in a Proteus mirabilis Clinical Isolate.

    Science.gov (United States)

    Girlich, Delphine; Bonnin, Rémy A; Bogaerts, Pierre; De Laveleye, Morgane; Huang, Daniel T; Dortet, Laurent; Glaser, Philippe; Glupczynski, Youri; Naas, Thierry

    2017-02-01

    Horizontal gene transfer may occur between distantly related bacteria, thus leading to genetic plasticity and in some cases to acquisition of novel resistance traits. Proteus mirabilis is an enterobacterial species responsible for human infections that may express various acquired β-lactam resistance genes, including different classes of carbapenemase genes. Here we report a Proteus mirabilis clinical isolate (strain 1091) displaying resistance to penicillin, including temocillin, together with reduced susceptibility to carbapenems and susceptibility to expanded-spectrum cephalosporins. Using biochemical tests, significant carbapenem hydrolysis was detected in P. mirabilis 1091. Since PCR failed to detect acquired carbapenemase genes commonly found in Enterobacteriaceae, we used a whole-genome sequencing approach that revealed the presence of bla OXA-58 class D carbapenemase gene, so far identified only in Acinetobacter species. This gene was located on a 3.1-kb element coharboring a bla AmpC -like gene. Remarkably, these two genes were bracketed by putative XerC-XerD binding sites and inserted at a XerC-XerD site located between the terminase-like small- and large-subunit genes of a bacteriophage. Increased expression of the two bla genes resulted from a 6-time tandem amplification of the element as revealed by Southern blotting. This is the first isolation of a clinical P. mirabilis strain producing OXA-58, a class D carbapenemase, and the first description of a XerC-XerD-dependent insertion of antibiotic resistance genes within a bacteriophage. This study revealed a new role for the XerC-XerD recombinase in bacteriophage biology. Copyright © 2017 American Society for Microbiology.

  7. Numerical and Experimental Study on Manufacture of a Novel High-Capacity Engine Oil Pan Subjected to Hydro-Mechanical Deep Drawing

    Science.gov (United States)

    Chen, D. Y.; Xu, Y.; Zhang, S. H.; El-Aty, A. Abd; Ma, Y.

    2017-09-01

    The oil pan is equipped at the bottom of engine crankcase of the automobile to prevent impurity and collect the lubrication oil from the surfaces of the engine which is helpful for heat dissipation and oxidation prevention. The present study aims at manufacturing a novel high-capacity engine oil pan, which is considered as a complex shaped component with features of thin wall, large size and asymmetric deep cavity through both numerical and experimental methods. The result indicated that it is difficult to form the current part through the common deep drawing process. Accordingly, the hydro-mechanical deep drawing technology was conducted, which consisted of two steps, previous local drawing and the final integral deep drawing with hydraulic pressure. The finite element analysis (FEA) was carried out to investigate the influence of initial blank dimension and the key process parameters such as loading path, draw-bead force and fillet radius on the formability of the sheet blank. Compared with the common deep drawing, the limit drawing ratio by hydro-mechanical deep drawing can be increased from 2.34 to 2.77, while the reduction in blank wall thickness can be controlled in the range of 28%. The formability is greatly improved without any defects such as crack and wrinkle by means of parameters optimisation. The results gained from simulation keep a reasonable agreement with that obtained from experiment trials.

  8. Gene blaCTX-M Mutation as Risk Factor of Antibiotic Resistance

    Directory of Open Access Journals (Sweden)

    Devinna Kang

    2017-06-01

    Full Text Available Currently there are more than half from all antibiotics used in the world which is belong to β lactam group, but clinical effectiveness of the antibiotics are limited by antibiotic resistance of microorganisms as causative agents from infectious diseases. Several resistance mechanisms for Enterobacteriaceae are mostly caused by enzymatic hydrolysis of antibiotics specific enzymes, called β lactamases. β lactamases represent a large group of enzyme which is genetically and functionally different as extended‑spectrum β-lactamase (ESBL and known as greatest threat of resistence. Plasmid localization from the encoded gene and enzyme distribution among the pathogen increases every year. Most widespread and clinically relevant ESBL are class A ESBL of Temoniera (TEM, Sulphydryl variable (SHV and Cefotaxime (CTX-M types. The purpose of this review was to analyze variant of blaCTX-M gene which cause the most increase incidence of antibiotic resistance. The methods of this review were data-based searching based on Pubmed, Scopus and Google Scholar, without limitation of index factor by using the keyword “blaCTX-M”, “Extended-spectrum β-lactamase”, and “antibiotic resistance”. The conclusion of the review is CTX-M type ESBL have replaced TEM and SHV type as dominant enzyme in last decade. ESBL produced by Klebsiella pneumoniae have emerged as one of major nosocomial pathogens. Nosocomial infection caused by CTX-M-15 in Klebsiella pneumoniae dramatically increased in recent years.

  9. Virulence of Klebsiella pneumoniae isolates harboring bla KPC-2 carbapenemase gene in a Caenorhabditis elegans model.

    Directory of Open Access Journals (Sweden)

    Jean-Philippe Lavigne

    Full Text Available Klebsiella pneumoniae carbapenemase (KPC is a carbapenemase increasingly reported worldwide in Enterobacteriaceae. The aim of this study was to analyze the virulence of several KPC-2-producing K. pneumoniae isolates. The studied strains were (i five KPC-2 clinical strains from different geographical origins, belonging to different ST-types and possessing plasmids of different incompatibility groups; (ii seven transformants obtained after electroporation of either these natural KPC plasmids or a recombinant plasmid harboring only the bla KPC-2 gene into reference strains K. pneumoniae ATCC10031/CIP53153; and (iii five clinical strains cured of plasmids. The virulence of K. pneumoniae isolates was evaluated in the Caenorhabditis elegans model. The clinical KPC producers and transformants were significantly less virulent (LT50: 5.5 days than K. pneumoniae reference strain (LT50: 4.3 days (p<0.01. However, the worldwide spread KPC-2 positive K. pneumoniae ST258 strains and reference strains containing plasmids extracted from K. pneumoniae ST258 strains had a higher virulence than KPC-2 strains belonging to other ST types (LT50: 5 days vs. 6 days, p<0.01. The increased virulence observed in cured strains confirmed this trend. The bla KPC-2 gene itself was not associated to increased virulence.

  10. Pathogenicity of pan-drug-resistant Serratia marcescens harbouring blaNDM-1.

    Science.gov (United States)

    Gruber, Teresa M; Göttig, Stephan; Mark, Laura; Christ, Sara; Kempf, Volkhard A J; Wichelhaus, Thomas A; Hamprecht, Axel

    2015-04-01

    To characterize a pan-drug-resistant Serratia marcescens clinical isolate carrying the New Delhi metallo-β-lactamase (NDM)-1. The presence of β-lactamase genes was examined by PCR and sequencing. Antibiotic susceptibility was determined by antibiotic gradient test. Transformation assays, transconjugation assays, PFGE and PCR-based replicon typing were used for plasmid analysis. Horizontal gene transfer was evaluated by liquid mating using Escherichia coli J53 as a recipient. Pathogenicity of NDM-1 expressing S. marcescens was analysed using the Galleria mellonella infection model. S. marcescens isolate SM1890 was non-susceptible to all tested antibiotics, with minocycline retaining intermediate activity. blaNDM-1 was located on a 140 kb IncA/C-type plasmid which was transferable to E. coli and Klebsiella pneumoniae by conjugation. The LD50 of the NDM-positive, SM1890 isolate was higher than that of other, NDM-1 negative, S. marcescens strains. The presence of a blaNDM-1-harbouring IncA/C plasmid resulted in marked resistance to β-lactam antibiotics, but had no significant effect on virulence of isogenic strains. Because of the intrinsic resistance of S. marcescens to colistin and reduced susceptibility to tigecycline, treatment options for infections by NDM-1-positive isolates are extremely limited in this species. © The Author 2014. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  11. Characterization of a novel plasmid type and various genetic contexts of bla OXA-58 in Acinetobacter spp. from multiple cities in China.

    Directory of Open Access Journals (Sweden)

    Yiqi Fu

    Full Text Available BACKGROUND/OBJECTIVE: Several studies have described the epidemiological distribution of blaOXA-58-harboring Acinetobacter baumannii in China. However, there is limited data concerning the replicon types of blaOXA-58-carrying plasmids and the genetic context surrounding blaOXA-58 in Acinetobacter spp. in China. METHODOLOGY/PRINCIPAL FINDINGS: Twelve non-duplicated blaOXA-58-harboring Acinetobacter spp. isolates were collected from six hospitals in five different cities between 2005 and 2010. The molecular epidemiology of the isolates was carried out using PFGE and multilocus sequence typing. Carbapenemase-encoding genes and plasmid replicase genes were identified by PCR. The genetic location of blaOXA-58 was analyzed using S1-nuclease method. Plasmid conjugation and electrotransformation were performed to evaluate the transferability of blaOXA-58-harboring plasmids. The genetic structure surrounding blaOXA-58 was determined by cloning experiments. The twelve isolates included two Acinetobacter pittii isolates (belong to one pulsotype, three Acinetobacter nosocomialis isolates (belong to two pulsotypes and seven Acinetobacter baumannii isolates (belong to two pulsotypes/sequence types. A. baumannii ST91 was found to be a potential multidrug resistant risk clone carrying both blaOXA-58 and blaOXA-23. blaOXA-58 located on plasmids varied from ca. 52 kb to ca. 143 kb. All plasmids can be electrotransformed to A. baumannii recipient, but were untypeable by the current replicon typing scheme. A novel plasmid replicase named repAci10 was identified in blaOXA-58-harboring plasmids of two A. pittii isolates, three A. nosocomialis isolates and two A. baumannii isolates. Four kinds of genetic contexts of blaOXA-58 were identified. The transformants of plasmids with structure of IS6 family insertion sequence (ISOur1, IS1008 or IS15-ΔISAba3-like element-blaOXA-58 displayed carbapenem nonsusceptible, while others with structure of intact ISAba3-like element-bla

  12. Survey of Antibiotic Resistance and Frequency of blaOXA-23 and blaOXA-24 Oxacillinase in Acinetobacter baumannii Isolated from Tracheal Tube Specimens of Patients Hospitalized in Intensive Care Units in Isfahan city

    Directory of Open Access Journals (Sweden)

    M Ghalebi

    2017-04-01

    chi-square tests. Results: All isolates were found resistant to ceftazidime, ceftriaxone, meropenem and imipenem and the lowest resistance were seen against colistin (0% and tigecycline (10%, respectively. All isolates were resistant to imipenem using Etest method with MIC ≥ 32 μg / ml. blaOXA-23 and blaOXA-24 genes were detected in 87.5% and 25% of isolates, respectively. Conclusion: Due to the results, treatment of A. baumannii isolates by carbapenems is ineffective and tigecycline or colistin could be used for treatment. Other studies for detection of other mechanisms for carbapenem resistance are recommended.

  13. Iodometric and Molecular Detection of ESBL Production Among Clinical Isolates of E. coli Fingerprinted by ERIC-PCR: The First Egyptian Report Declares the Emergence of E. coli O25b-ST131clone Harboring blaGES.

    Science.gov (United States)

    El-Badawy, Mohamed F; Tawakol, Wael M; Maghrabi, Ibrahim A; Mansy, Moselhy S; Shohayeb, Mohamed M; Ashour, Mohammed S

    2017-09-01

    The extensive use of β-lactam antibiotics has led to emergence and spread of extended-spectrum β-lactamases (ESBLs). This study was conducted to investigate the prevalence of 7 different ESBL genes (bla TEM , bla SHV , bla CTX-M , bla VEB , bla PER , bla GES , and bla OXA-10 ) and O25b-ST131 high-risk clone among 61 clinical isolates of Escherichia coli. Also, one broad-spectrum β-lactamase (bla OXA-1 ) was investigated. This study was also constructed to evaluate iodometric overlay method in detection of ESBL production. Phenotypic identification of E. coli isolates using API 20E revealed 18 distinct biotypes. DNA fingerprinting using enterobacterial repetitive intergenic consensus polymerase chain reaction (ERIC-PCR) differentiated all isolates into 2 main phylogenetic groups with 60 distinct genetic profiles. Elevated values of minimal inhibitory concentration (MIC) 50 and MIC 90 for third- and fourth-generation cephalosporins were observed. Phenotypic tests revealed that 85.24% of isolates were ESBL producers. The incidence rates of bla TEM , bla SHV , bla CTX-M , bla GES , bla OXA-1 , and bla OXA-10 among E. coli ESBL producer phenotype were 69.23%, 25%, 96.15%, 3.85%, 11.54%, and 48%, respectively. On the other hand, bla VEB and bla PER were not detected. Sequencing of bla TEM and bla SHV revealed that bla TEM-214 and bla SHV-11 were the most prevalent variants. Group characterization of bla CTX-M revealed that bla CTX-M-1 was the most prevalent group of bla CTX-M family. It was found that 30.77% of E. coli ESBL producers belonged to O25b-ST131 clone harboring bla CTX-M-15 . This study concluded that iodometric overlay method was 100% sensitive in detection of ESBL production. To our knowledge, this is the first Egyptian study that declares the emergence of E. coli O25b-ST131 harboring bla GES .

  14. Precision manufacturing

    CERN Document Server

    Dornfeld, David

    2008-01-01

    Today there is a high demand for high-precision products. The manufacturing processes are now highly sophisticated and derive from a specialized genre called precision engineering. Precision Manufacturing provides an introduction to precision engineering and manufacturing with an emphasis on the design and performance of precision machines and machine tools, metrology, tooling elements, machine structures, sources of error, precision machining processes and precision process planning. As well as discussing the critical role precision machine design for manufacturing has had in technological developments over the last few hundred years. In addition, the influence of sustainable manufacturing requirements in precision processes is introduced. Drawing upon years of practical experience and using numerous examples and illustrative applications, David Dornfeld and Dae-Eun Lee cover precision manufacturing as it applies to: The importance of measurement and metrology in the context of Precision Manufacturing. Th...

  15. The role of the genetic elements bla oxa and IS Aba 1 in the Acinetobacter calcoaceticus-Acinetobacter baumannii complex in carbapenem resistance in the hospital setting.

    Science.gov (United States)

    Kobs, Vanessa Cristine; Ferreira, Jéssica Augustini; Bobrowicz, Thaís Alexandra; Ferreira, Leslie Ecker; Deglmann, Roseneide Campos; Westphal, Glauco Adrieno; França, Paulo Henrique Condeixa de

    2016-01-01

    Members of the Acinetobacter genus are key pathogens that cause healthcare-associated infections, and they tend to spread and develop new antibiotic resistance mechanisms. Oxacillinases are primarily responsible for resistance to carbapenem antibiotics. Higher rates of carbapenem hydrolysis might be ascribed to insertion sequences, such as the ISAba1 sequence, near bla OXA genes. The present study examined the occurrence of the genetic elements bla OXA and ISAba1 and their relationship with susceptibility to carbapenems in clinical isolates of the Acinetobacter calcoaceticus-Acinetobacter baumannii complex. Isolates identified over 6 consecutive years in a general hospital in Joinville, Southern Brazil, were evaluated. The investigation of 5 families of genes encoding oxacillinases and the ISAba1 sequence location relative to bla OXA genes was conducted using polymerase chain reaction. All isolates presented the bla OXA-51-like gene (n = 78), and 91% tested positive for the bla OXA-23-like gene (n = 71). The presence of ISAba1 was exclusively detected in isolates carrying the bla OXA-23-like gene. All isolates in which ISAba1 was found upstream of the bla OXA-23-like gene (n = 69) showed resistance to carbapenems, whereas the only isolate in which ISAba1 was not located near the bla OXA-23-like gene was susceptible to carbapenems. The ISAba1 sequence position of another bla OXA-23-like-positive isolate was inconclusive. The isolates exclusively carrying the bla OXA-51-like gene (n = 7) showed susceptibility to carbapenems. The presence of the ISAba1 sequence upstream of the bla OXA-23-like gene was strongly associated with carbapenem resistance in isolates of the A. calcoaceticus-A. baumannii complex in the hospital center studied.

  16. The role of the genetic elements bla oxa and IS Aba 1 in the Acinetobacter calcoaceticus-Acinetobacter baumannii complex in carbapenem resistance in the hospital setting

    Directory of Open Access Journals (Sweden)

    Vanessa Cristine Kobs

    Full Text Available Abstract: INTRODUCTION: Members of the Acinetobacter genus are key pathogens that cause healthcare-associated infections, and they tend to spread and develop new antibiotic resistance mechanisms. Oxacillinases are primarily responsible for resistance to carbapenem antibiotics. Higher rates of carbapenem hydrolysis might be ascribed to insertion sequences, such as the ISAba1 sequence, near bla OXA genes. The present study examined the occurrence of the genetic elements bla OXA and ISAba1 and their relationship with susceptibility to carbapenems in clinical isolates of the Acinetobacter calcoaceticus-Acinetobacter baumannii complex. METHODS: Isolates identified over 6 consecutive years in a general hospital in Joinville, Southern Brazil, were evaluated. The investigation of 5 families of genes encoding oxacillinases and the ISAba1 sequence location relative to bla OXA genes was conducted using polymerase chain reaction. RESULTS: All isolates presented the bla OXA-51-like gene (n = 78, and 91% tested positive for the bla OXA-23-like gene (n = 71. The presence of ISAba1 was exclusively detected in isolates carrying the bla OXA-23-like gene. All isolates in which ISAba1 was found upstream of the bla OXA-23-like gene (n = 69 showed resistance to carbapenems, whereas the only isolate in which ISAba1 was not located near the bla OXA-23-like gene was susceptible to carbapenems. The ISAba1 sequence position of another bla OXA-23-like-positive isolate was inconclusive. The isolates exclusively carrying the bla OXA-51-like gene (n = 7 showed susceptibility to carbapenems. CONCLUSIONS: The presence of the ISAba1 sequence upstream of the bla OXA-23-like gene was strongly associated with carbapenem resistance in isolates of the A. calcoaceticus-A. baumannii complex in the hospital center studied.

  17. Micro/Nano manufacturing

    DEFF Research Database (Denmark)

    Tosello, Guido

    2017-01-01

    Micro- and nano-scale manufacturing has been the subject of an increasing amount of interest and research effort worldwide in both academia and industry over the past 10 years.Traditional (MEMS) manufacturing, but also precision manufacturing technologies have been developed to cover micro......-scale dimensions and accuracies. Furthermore, these fundamentally different technology ecosystems are currently combined in order to exploit strengths of both platforms. One example is the use of lithography-based technologies to establish nanostructures that are subsequently transferred to 3D geometries via...

  18. Detection of blaCTX-M gene among Pseudomonas aeruginosa isolated from water samples in Baghdad

    Directory of Open Access Journals (Sweden)

    Saba R. Khdair

    2017-11-01

    Full Text Available A total of 50 environmental Pseudomonas aeruginosa isolates were collected from sewage and tap water in Baghdad, Iraq. The MICs of Cefotaxime and Ceftazidime were determined by using agar dilution method, The MIC ranged from 2 to 256 µg/ml.The results of antibiotic sensitivity test showed that among sewage P. aeruginosa isolates, resistance was observed most often to Ticarcillin (92%, Penicillin G (84%, Ceftazidime (12%, (8% for each of Cefotaxime and Ticarcillin. On the other hand, all tap water isolates were sensitive to Ofloxacin and Levofloxacin, Except (5% of isolates were resistant to Cefotaxime (25% to Ceftazidime and (95% to Ticarcillin. All isolates were tested for Extended-Spectrum β-Lactamase (ESBL production. Ten isolates (20% were found to be ESBL producers. All environmental P. aeruginosa isolates were screened for the presence of the blaCTX-M genes by application PCR, Only (30% of them were positive for this test.

  19. Identificación genotípica de β-lactamasas de espectro espectro extendido (BLEE (blaTEM y blaSHV en Escherichia coli uropatógena

    Directory of Open Access Journals (Sweden)

    Yeffersson Grandas Franco

    2016-06-01

    Full Text Available Introducción: Las infecciones de tracto urinario (ITU son consideradas un problema de salud pública a nivel mundial debido a su incidencia y morbilidad. Entre los agentes causales que se aíslan con mayor frecuencia, se encuentra E. coli, con una prevalencia que va desde 40% al 95%. Actualmente, la problemática de las ITU ha venido en aumento, debido a la aparición de resistencia bacteriana a agentes antimicrobianos, influenciado por la presión selectiva, la preexistencia de genes de resistencia y el uso indiscriminado de antibióticos. Objetivo: Identificar molecularmente β-lactamasas de espectro extendido (blaTEM y blaSHV, en E. coli uropatógena, aislada en pacientes ambulatorios que asisten a un laboratorio clínico de tercer nivel de complejidad. Materiales y métodos: Estudio descriptivo de corte transversal. En este trabajo se estudiaron 250 cepas de las cuales 120 eran presuntivas de producir β-lactamasas de acuerdo al método de Kirby-bauer que se realizó años anteriores por el semillero de Inmunidad e Infección. Los genes de interés se amplificaron mediante PCR. Se utilizó Klebsiella pneumoniae ATCC 700603 como control positivo. Una vez amplificado el gen se llevó a cabo el corrido electroforético en gel de agarosa donde el producto amplificado fue de 470 pb en el caso de blaSHV y de 1080 pb para blaTEM. Los fenotipos compatibles con producción de β-lactamasas se analizaron por medio de distribución de frecuencia usando el software WHONET 5,6. La distribución de frecuencia de los genes analizados se calculó usando el software MedCalc versión 15.2.2 (Bélgica – Software BBVA. Resultados: De las cepas analizadas, el 52,8% portadoras del gen blaTEM y el 2,8% del gen blaSHV-2. Se encontró co-existencia de los genes blaSHV-2 y blaTEM en el 1,68% del total de las cepas. De todas las cepas presuntivas de producir BLEE (n=120, 94 fueron productoras de BLEE, lo que nos indicaría que las 21 cepas restantes, implementan

  20. Whole genome sequencing of Escherichia coli encoding blaNDM isolated from humans and companion animals in Egypt

    Science.gov (United States)

    Companion animals are a source of zoonotic infections and especially important considering the potential of companion animals to harbor antibiotic resistant pathogens. In this study, blaNDM positive Escherichia coli from companion animals, humans, and the environment from Mansoura, Egypt were charac...

  1. Genotypic and Antimicrobial Susceptibility of Carbapenem-Resistant Acinetobacter baumannii: Analysis of ISAba Elements and blaOXA-23-like Genes Including A New Variant

    Directory of Open Access Journals (Sweden)

    Abbas eBahador

    2015-11-01

    Full Text Available Carbapenem-resistant Acinetobacter baumannii (CR-AB causes serious nosocomial infections, especially in ICU wards of hospitals, worldwide. Expression of blaOXA genes is the chief mechanism of conferring carbapenem resistance among CR-AB. Although some blaOXA genes have been studied among CR-AB isolates from Iran, their blaOXA-23-like genes have not been investigated. We used a multiplex-PCR to detect Ambler class A, B, and D carbapenemases of 85 isolates, and determined that 34 harbored blaOXA-23-like genes. Amplified fragment length polymorphism (AFLP genotyping, followed by DNA sequencing of blaOXA-23-like amplicons of CR-AB from each AFLP group was used to characterize their blaOXA-23-like genes. We also assessed the antimicrobial susceptibility pattern of CR-AB isolates, and tested whether they harbored insertion sequences ISAba1 and ISAba4. Sequence comparison with reference strain A. baumannii (NCTC12156 revealed five types of mutations in blaOXA-23-like genes; including one novel variant and four mutants that were already reported from China and the USA. All of the blaOXA-23-like genes mutations were associated with increased minimum inhibitory concentrations (MICs against imipenem. ISAba1 and ISAba4 sequences were detected upstream of blaOXA-23 genes in 19% and 7% of isolates, respectively. The isolation of CR-AB with new blaOXA-23 mutations including some that have been reported from the USA and China highlights CR-AB pervasive distribution, which underscores the importance of concerted national and global efforts to control the spread of CR-AB isolates worldwide.

  2. Identification and characterization of two novel bla(KLUC resistance genes through large-scale resistance plasmids sequencing.

    Directory of Open Access Journals (Sweden)

    Teng Xu

    Full Text Available Plasmids are important antibiotic resistance determinant carriers that can disseminate various drug resistance genes among species or genera. By using a high throughput sequencing approach, two groups of plasmids of Escherichia coli (named E1 and E2, each consisting of 160 clinical E. coli strains isolated from different periods of time were sequenced and analyzed. A total of 20 million reads were obtained and mapped onto the known resistance gene sequences. As a result, a total of 9 classes, including 36 types of antibiotic resistant genes, were identified. Among these genes, 25 and 27 single nucleotide polymorphisms (SNPs appeared, of which 9 and 12 SNPs are nonsynonymous substitutions in the E1 and E2 samples. It is interesting to find that a novel genotype of bla(KLUC, whose close relatives, bla(KLUC-1 and bla(KLUC-2, have been previously reported as carried on the Kluyvera cryocrescens chromosome and Enterobacter cloacae plasmid, was identified. It shares 99% and 98% amino acid identities with Kluc-1 and Kluc-2, respectively. Further PCR screening of 608 Enterobacteriaceae family isolates yielded a second variant (named bla(KLUC-4. It was interesting to find that Kluc-3 showed resistance to several cephalosporins including cefotaxime, whereas bla(KLUC-4 did not show any resistance to the antibiotics tested. This may be due to a positively charged residue, Arg, replaced by a neutral residue, Leu, at position 167, which is located within an omega-loop. This work represents large-scale studies on resistance gene distribution, diversification and genetic variation in pooled multi-drug resistance plasmids, and provides insight into the use of high throughput sequencing technology for microbial resistance gene detection.

  3. Additive manufacturing.

    Science.gov (United States)

    Mumith, A; Thomas, M; Shah, Z; Coathup, M; Blunn, G

    2018-04-01

    Increasing innovation in rapid prototyping (RP) and additive manufacturing (AM), also known as 3D printing, is bringing about major changes in translational surgical research. This review describes the current position in the use of additive manufacturing in orthopaedic surgery. Cite this article: Bone Joint J 2018;100-B:455-60.

  4. Manufacturing technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  5. Molecular epidemiology of outbreak-related pseudomonas aeruginosa strains carrying the novel variant blaVIM-17 metallo-beta-lactamase gene.

    Science.gov (United States)

    Siarkou, Victoria I; Vitti, Danai; Protonotariou, Efthimia; Ikonomidis, Alexandros; Sofianou, Danai

    2009-04-01

    A study was designed to investigate the molecular epidemiological characteristics of multidrug-resistant outbreak-related Pseudomonas aeruginosa isolates collected in a university hospital in northern Greece. Of 29 nonreplicate P. aeruginosa isolates resistant to carbapenems and ceftazidime, 14 were positive for metallo-beta-lactamase production. PCR analyses with primers specific for bla(VIM) and bla(IMP) revealed that 13 isolates carried a novel bla(VIM-2) gene variant, designated bla(VIM-17), and only 1 isolate carried bla(VIM-2), a gene predominant among P. aeruginosa strains in Greek hospitals. Pulsed-field gel electrophoresis of XbaI-digested genomic DNAs showed a close genetic relationship for 12 of 13 bla(VIM-17)-carrying outbreak-related isolates, which were of the O11 serotype; the clonally unrelated isolate carrying bla(VIM-17) was of the O12 serotype. PCR mapping strategies for the detection of class 1 integrons and sequencing approaches revealed the presence of integrons containing one bla(VIM) cassette flanked by two aacA29 cassettes. These integrons were similar but not identical to In59 (GenBank accession number AF263519) initially described in France. All isolates carrying bla(VIM-17), regardless of their genetic profile, had an identical integron, named In59.3, indicating that although the hospital outbreak was mainly due to clonal dissemination, the horizontal transmission of the bla(VIM-17)-containing integron among P. aeruginosa isolates should also have occurred. An outbreak-related isolate and a control strain, both of which carried the bla(VIM-2) gene but which were clonally distinct, had an identical integron, named In59.2, which differed only at the level of the bla(VIM) gene from In59.3 integrons, suggesting a common ancestry. The spread of the bla(VIM-17)-containing integron in clonally unrelated P. aeruginosa isolates without any evidence of plasmid carriage is probably associated with a transposon.

  6. Environmental pollution with antimicrobial agents from bulk drug manufacturing industries in Hyderabad, South India, is associated with dissemination of extended-spectrum beta-lactamase and carbapenemase-producing pathogens.

    Science.gov (United States)

    Lübbert, Christoph; Baars, Christian; Dayakar, Anil; Lippmann, Norman; Rodloff, Arne C; Kinzig, Martina; Sörgel, Fritz

    2017-08-01

    High antibiotic and antifungal concentrations in wastewater from anti-infective drug production may exert selection pressure for multidrug-resistant (MDR) pathogens. We investigated the environmental presence of active pharmaceutical ingredients and their association with MDR Gram-negative bacteria in Hyderabad, South India, a major production area for the global bulk drug market. From Nov 19 to 28, 2016, water samples were collected from the direct environment of bulk drug manufacturing facilities, the vicinity of two sewage treatment plants, the Musi River, and habitats in Hyderabad and nearby villages. Samples were analyzed for 25 anti-infective pharmaceuticals with liquid chromatography-tandem mass spectrometry and for MDR Gram-negative bacteria using chromogenic culture media. In addition, specimens were screened with PCR for bla VIM , bla KPC , bla NDM , bla IMP-1 , and bla OXA-48 resistance genes. All environmental specimens from 28 different sampling sites were contaminated with antimicrobials. High concentrations of moxifloxacin, voriconazole, and fluconazole (up to 694.1, 2500, and 236,950 µg/L, respectively) as well as increased concentrations of eight other antibiotics were found in sewers in the Patancheru-Bollaram industrial area. Corresponding microbiological analyses revealed an extensive presence of extended-spectrum beta-lactamase and carbapenemase-producing Enterobacteriaceae and non-fermenters (carrying mainly bla OXA-48 , bla NDM , and bla KPC ) in more than 95% of the samples. Insufficient wastewater management by bulk drug manufacturing facilities leads to unprecedented contamination of water resources with antimicrobial pharmaceuticals, which seems to be associated with the selection and dissemination of carbapenemase-producing pathogens. The development and global spread of antimicrobial resistance present a major challenge for pharmaceutical producers and regulatory agencies.

  7. Micro Manufacturing

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    Manufacturing deals with systems that include products, processes, materials and production systems. These systems have functional requirements, constraints, design parameters and process variables. They must be decomposed in a systematic manner to achieve the best possible system performance....... If a micro manufacturing system isn’t designed rationally and correctly, it will be high-cost, unreliable, and not robust. For micro products and systems it is a continuously increasing challenge to create the operational basis for an industrial production. As the products through product development...... processes are made applicable to a large number of customers, the pressure in regard to developing production technologies that make it possible to produce the products at a reasonable price and in large numbers is growing. The micro/nano manufacturing programme at the Department of Manufacturing...

  8. Smart Manufacturing.

    Science.gov (United States)

    Davis, Jim; Edgar, Thomas; Graybill, Robert; Korambath, Prakashan; Schott, Brian; Swink, Denise; Wang, Jianwu; Wetzel, Jim

    2015-01-01

    Historic manufacturing enterprises based on vertically optimized companies, practices, market share, and competitiveness are giving way to enterprises that are responsive across an entire value chain to demand dynamic markets and customized product value adds; increased expectations for environmental sustainability, reduced energy usage, and zero incidents; and faster technology and product adoption. Agile innovation and manufacturing combined with radically increased productivity become engines for competitiveness and reinvestment, not simply for decreased cost. A focus on agility, productivity, energy, and environmental sustainability produces opportunities that are far beyond reducing market volatility. Agility directly impacts innovation, time-to-market, and faster, broader exploration of the trade space. These changes, the forces driving them, and new network-based information technologies offering unprecedented insights and analysis are motivating the advent of smart manufacturing and new information technology infrastructure for manufacturing.

  9. IncA/C Plasmid Carrying bla(NDM-1), bla(CMY-16), and fosA3 in a Salmonella enterica Serovar Corvallis Strain Isolated from a Migratory Wild Bird in Germany.

    Science.gov (United States)

    Villa, L; Guerra, B; Schmoger, S; Fischer, J; Helmuth, R; Zong, Z; García-Fernández, A; Carattoli, A

    2015-10-01

    A Salmonella enterica serovar Corvallis strain was isolated from a wild bird in Germany. This strain carried the IncA/C2 pRH-1238 plasmid. Complete sequencing of the plasmid was performed, identifying the blaNDM-1, blaCMY-16, fosA3, sul1, sul2, strA, strB, aac(6')-Ib, aadA5, aphA6, tetA(A), mphA, floR, dfrA7, and merA genes, which confer clinically relevant resistance to most of the antimicrobial classes, including β-lactams with carbapenems, fosfomycin, aminoglycosides, co-trimoxazole, tetracyclines, and macrolides. The strain likely originated from the Asiatic region and was transferred to Germany through the Milvus migrans migratory route. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

  10. Reusing Old Manufacturing Buildings

    Science.gov (United States)

    Roman, Harry T.

    2014-01-01

    This article presents an interesting design challenge for students, one that will certainly let them integrate subject matter and get a sense of pride for doing something useful in their own community. The author would be willing to bet that the average town or city has some old red brick manufacturing building(s) that have seen much better days.…

  11. mcr-1 and blaKPC-3 in Escherichia coli Sequence Type 744 after Meropenem and Colistin Therapy, Portugal.

    Science.gov (United States)

    Tacão, Marta; Tavares, Rafael Dos Santos; Teixeira, Pedro; Roxo, Inês; Ramalheira, Elmano; Ferreira, Sónia; Henriques, Isabel

    2017-08-01

    Escherichia coli Ec36 was recovered from a patient in Portugal after treatment with meropenem and colistin. Besides an IncF plasmid with Tn1441d-bla KPC-3 , already reported in clinical strains in this country, E. coli Ec36 co-harbored an IncX4::mcr-1 gene. Results highlight emerging co-resistance to carbapenems and polymyxins after therapy with drugs from both classes.

  12. Bacillus licheniformis BlaR1 L3 Loop Is a Zinc Metalloprotease Activated by Self-Proteolysis

    Science.gov (United States)

    Sépulchre, Jérémy; Amoroso, Ana; Joris, Bernard

    2012-01-01

    In Bacillus licheniformis 749/I, BlaP β-lactamase is induced by the presence of a β-lactam antibiotic outside the cell. The first step in the induction mechanism is the detection of the antibiotic by the membrane-bound penicillin receptor BlaR1 that is composed of two functional domains: a carboxy-terminal domain exposed outside the cell, which acts as a penicillin sensor, and an amino-terminal domain anchored to the cytoplasmic membrane, which works as a transducer-transmitter. The acylation of BlaR1 sensor domain by the antibiotic generates an intramolecular signal that leads to the activation of the L3 cytoplasmic loop of the transmitter by a single-point cleavage. The exact mechanism of L3 activation and the nature of the secondary cytoplasmic signal launched by the activated transmitter remain unknown. However, these two events seem to be linked to the presence of a HEXXH zinc binding motif of neutral zinc metallopeptidases. By different experimental approaches, we demonstrated that the L3 loop binds zinc ion, belongs to Gluzincin metallopeptidase superfamily and is activated by self-proteolysis. PMID:22623956

  13. LEAN Manufacturing

    DEFF Research Database (Denmark)

    Bilberg, Arne

    . The mission with the strategy is to obtain competitive production in Denmark and in Western Europe based on the right combination of manufacturing principles, motivated and trained employees, level of automation, and cooperation with suppliers and customers worldwide. The strategy has resulted in technical...

  14. Determination of a novel integron-located variant (blaOXA -320 ) of Class D β-lactamase in Proteus mirabilis.

    Science.gov (United States)

    Cicek, Aysegul Copur; Duzgun, Azer Ozad; Saral, Aysegul; Sandalli, Cemal

    2014-10-01

    Proteus mirabilis (P. mirabilis) is one of Gram-negative pathogens encountered in clinical specimens. A clinical isolate (TRP41) of P. mirabilis was isolated from a Turkish patient in Turkey. The isolate was identified using the API 32GN system and 16S rRNA gene sequencing and it was found resistant to ampicillin/sulbactam, piperacillin, tetracycline, and trimethoprim/sulfamethoxazole. This isolate was harboring a Class 1 integron gene cassette and its DNA sequence analysis revealed a novel blaOXA variant exhibiting one amino acid substitution (Asn266Ile) from blaOXA-1 . This new variant of OXA was located on Class 1 integron together with aadA1 gene encoding aminoglycoside-modifying enzymes. According to sequence records, the new variant was named as blaOXA-320 . Cassette array and size of integron were found as blaOXA-320 -aadA1 and 2086 bp, respectively. The blaOXA-320 gene is not transferable according to conjugation experiment. In this study, we report the first identification of blaOXA-320 -aadA1 gene cassette, a novel variant of Class D β-lactamase, in P. mirabilis from Turkey. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Semiconductor Manufacturing equipment introduction

    International Nuclear Information System (INIS)

    Im, Jong Sun

    2001-02-01

    This book deals with semiconductor manufacturing equipment. It is comprised of nine chapters, which are manufacturing process of semiconductor device, history of semiconductor manufacturing equipment, kinds and role of semiconductor manufacturing equipment, construction and method of semiconductor manufacturing equipment, introduction of various semiconductor manufacturing equipment, spots of semiconductor manufacturing, technical elements of semiconductor manufacturing equipment, road map of technology of semiconductor manufacturing equipment and semiconductor manufacturing equipment in the 21st century.

  16. Epidemiological characteristics of blaNDM-1 in Enterobacteriaceae and the Acinetobacter calcoaceticus-Acinetobacter baumannii complex in China from 2011 to 2012.

    Directory of Open Access Journals (Sweden)

    Weimei Ou

    Full Text Available The study aimed to investigate the prevalence and epidemiological characteristics of blaNDM-1 (encoding New Delhi metallo-β-lactamase 1 in Enterobacteriaceae and the Acinetobacter calcoaceticus-Acinetobacter baumannii complex (ABC in China from July 2011 to June 2012.PCR was used to screen for the presence of blaNDM-1 in all organisms studied. For blaNDM-1-positive strains, 16S rRNA analysis and Analytical Profile Index (API strips were used to identify the bacterial genus and species. The ABCs were reconfirmed by PCR detection of blaOXA-51-like. Antibiotic susceptibilities of the bacteria were assessed by determining minimum inhibitory concentration (MIC of them using two-fold agar dilution test, as recommended by the Clinical and Laboratory Standards Institute (CLSI. Molecular typing was performed using pulsed-field gel electrophoresis (PFGE. S1 nuclease-pulsed-field gel electrophoresis (S1-PFGE and Southern blot hybridization were conducted to ascertain the gene location of blaNDM-1. Conjugation experiments were conducted to determine the transmission of blaNDM-1-positive strains.Among 2,170 Enterobacteriaceae and 600 ABCs, seven Enterobacteriaceae strains and two A. calcoaceticus isolates from five different cities carried the blaNDM-1 gene. The seven Enterobacteriaceae strains comprised four Klebsiella pneumoniae, one Enterobacter cloacae, one Enterobacter aerogen and one Citrobacter freundii. All seven were non-susceptible to imipenem, meropenem or ertapenem. Two A. calcoaceticus species were resistant to imipenem and meropenem. Three K. pneumoniae showed the same PFGE profiles. The blaNDM-1 genes of eight strains were localized on plasmids, while one was chromosomal.Compared with previous reports, the numbers and species containing the blaNDM-1 in Enterobacteriaceae have significantly increased in China. Most of them are able to disseminate the gene, which is cause for concern. Consecutive surveillance should be implemented and should

  17. Green Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Patten, John

    2013-12-31

    Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

  18. [Neurons in NAc core and BLA are activated during cocaine context-associated reward memory retrieval in mice].

    Science.gov (United States)

    Wang, Jun-Jun; Yao, Wen-Qing; Chen, Yue-Jun; Ma, Lan; Tao, Ye-Zheng

    2014-10-25

    The intense associative memories that develop between cocaine-paired contexts and rewarding stimuli make addiction hard to cure by contributing to cocaine seeking and relapse. So it's of great importance to examine the neurobiological basis of addiction memory. Cocaine conditioned place preference (CPP) used in this study is a form of Pavlovian conditioning which can establish associations between drug and contextual factors. c-Fos and Zif268 are commonly used immediate early gene (IEG) makers to identify neurons that are activated after a stimulus or behavioral conditioning. This study was designed to reveal neuronal c-Fos, Zif268 expression pattern in 10 brain regions following cocaine context-associated reward memory retrieval in mice, combining animal behavioral study and immunofluorescence method. C57BL/6 mice were randomly divided into 3 groups: Saline retrieval, Cocaine retrieval, and No retrieval of cocaine groups. Cocaine retrieval and No retrieval of cocaine underwent CPP training (one side paired with cocaine, and the other side with saline) except that No retrieval of cocaine group didn't undergo CPP test. Saline retrieval group received saline injections (i.p) on both sides. The results showed that: Neuronal c-Fos, Zif268 protein expression levels in nucleus accumbens (NAc) core both were elevated in Cocaine retrieval group compared with those in Saline retrieval (Control) group during cocaine context-associated reward memory retrieval. Zif268 protein expression level in basolateral amygdala (BLA) was also elevated in Cocaine retrieval group compared with that in control mice. Elevation was not seen in other regions such as hippocampus, prefrontal cortex (PFC). Thus, NAc core and BLA were activated during cocaine context-associated reward memory retrieval. The results suggest that neurons that are activated in NAc core and BLA are crucial basis of cocaine context-associated reward memory.

  19. Structural Variabilities in β-Lactamase (blaA of Different Biovars of Yersinia enterocolitica: Implications for β-Lactam Antibiotic and β-Lactamase Inhibitor Susceptibilities.

    Directory of Open Access Journals (Sweden)

    Neelja Singhal

    Full Text Available Yersiniosis caused by Yersinia enterocolitica has been reported from all continents. The bacterial species is divided into more than fifty serovars and six biovars viz. 1A, 1B, 2, 3, 4 and 5 which differ in geographical distribution, ecological niches and pathogenicity. Most Y.enterocolitica strains harbor chromosomal genes for two β-lactamases, blaA an Ambler class A penicillinase and blaB an Ambler class C inducible cephalosporinase. In the present study, susceptibility to b-lactam antibiotics and β-lactamase inhibitor was studied for Y. enterocolitica strains of biovars 1A, 1B, 2 and 4. We observed that β-lactamases were expressed differentially among strains of different biovars. To understand the molecular mechanisms underlying such differential expression, the sequences of genes and promoters of blaA were compared. Also, the variants of blaA present in different biovars were modeled and docked with amoxicillin and clavulanic acid. The mRNA secondary structures of blaA variants were also predicted in-silico. Our findings indicated that neither variations in the promoter regions, nor the secondary structures of mRNA contributed to higher/lower expression of blaA in different biovars. Analysis of H-bonding residues of blaA variants with amoxicillin and clavulanic acid revealed that if amino acid residues of a β-lactamase interacting with amoxicillin and the clavulanic acid were similar, clavulanic acid was effective in engaging the enzyme, accounting for a significant reduction in MIC of amoxicillin-clavulanate. This finding might aid in designing better β-lactamase inhibitors with improved efficiencies in future.

  20. Inhibition of the β-Lactamase BlaMab by Avibactam Improves the In Vitro and In Vivo Efficacy of Imipenem against Mycobacterium abscessus.

    Science.gov (United States)

    Lefebvre, Anne-Laure; Le Moigne, Vincent; Bernut, Audrey; Veckerlé, Carole; Compain, Fabrice; Herrmann, Jean-Louis; Kremer, Laurent; Arthur, Michel; Mainardi, Jean-Luc

    2017-04-01

    Mycobacterium abscessus pulmonary infections are treated with a macrolide (clarithromycin or azithromycin), an aminoglycoside (amikacin), and a β-lactam (cefoxitin or imipenem). The triple combination is used without any β-lactamase inhibitor, even though M abscessus produces the broad-spectrum β-lactamase Bla Mab We determine whether inhibition of Bla Mab by avibactam improves the activity of imipenem against M. abscessus The bactericidal activity of drug combinations was assayed in broth and in human macrophages. The in vivo efficacy of the drugs was tested by monitoring the survival of infected zebrafish embryos. The level of Bla Mab production in broth and in macrophages was compared by quantitative reverse transcription-PCR and Western blotting. The triple combination of imipenem (8 or 32 μg/ml), amikacin (32 μg/ml), and avibactam (4 μg/ml) was bactericidal in broth (imipenem was used at 8 and 32 μg/ml, respectively. The triple combination achieved significant intracellular killing, with the bacterial survival rates being 54% and 7% with the low (8 μg/ml) and high (32 μg/ml) dosages of imipenem, respectively. In vivo inhibition of Bla Mab by avibactam improved the survival of zebrafish embryos treated with imipenem. Expression of the gene encoding Bla Mab was induced (20-fold) in the infected macrophages. Inhibition of Bla Mab by avibactam improved the efficacy of imipenem against M. abscessus in vitro , in macrophages, and in zebrafish embryos, indicating that this β-lactamase inhibitor should be clinically evaluated. The in vitro evaluation of imipenem may underestimate the impact of Bla Mab , since the production of the β-lactamase is inducible in macrophages. Copyright © 2017 American Society for Microbiology.

  1. Loop-mediated isothermal amplification: Rapid and sensitive detection of the antibiotic resistance gene ISAba1-blaOXA-51-like in Acinetobacter baumannii.

    Science.gov (United States)

    Mu, Xiaoqin; Nakano, Ryuichi; Nakano, Akiyo; Ubagai, Tsuneyuki; Kikuchi-Ueda, Takane; Tansho-Nagakawa, Shigeru; Kikuchi, Hirotoshi; Kamoshida, Go; Endo, Shiro; Yano, Hisakazu; Ono, Yasuo

    2016-02-01

    Carbapenem-resistant Acinetobacter baumannii, which are mainly induced by the production of OXA-type β-lactamases, are among the leading causes of nosocomial infections worldwide. Among the β-lactamase genes, the presence of the OXA-51-like gene carrying the upstream insertion sequence, ISAba1, was found to be one of the most prevalent carbapenem resistance mechanisms utilized by these bacteria. Consequently, it is necessary to develop a rapid detection method for ISAba1-blaOXA-51-like sequence for the timely and appropriate antibiotic treatment of A. baumannii infection. In this study, a loop-mediated isothermal amplification (LAMP) assay was optimized for ISAba1-blaOXA-51-like detection. The LAMP primer set was designed to recognize distinct sequences in the ISAba1-blaOXA-51-like gene and could amplify the gene within 25 min at an isothermal temperature of 60°C. This LAMP assay was able to detect the ISAba1-blaOXA-51-like gene with high specificity; in addition, no cross-reactivity was observed for other types of β-lactamase producers (OXA-23-like, OXA-40-like, OXA-58-like, and IMP-1), as indicated by the absence of false positive or false negative results. The detection limit for this assay was found to be 10(0)CFU per tube which was 100-fold more sensitive than a polymerase chain reaction assay for ISAba1-blaOXA-51-like detection. Furthermore, the LAMP assay provided swift detection of the ISAba1-blaOXA-51-like gene, even directly from clinical specimens. In summary, we have described a new, rapid assay for the detection of the ISAba1-blaOXA-51-like gene from A. baumannii that could be useful in a clinical setting. This method might facilitate epidemiological studies and allow monitoring of the emergence of drug resistant strains. Copyright © 2015 Elsevier B.V. All rights reserved.

  2. Effects of Optogenetic inhibition of BLA on Sleep Brief Optogenetic Inhibition of the Basolateral Amygdala in Mice Alters Effects of Stressful Experiences on Rapid Eye Movement Sleep.

    Science.gov (United States)

    Machida, Mayumi; Wellman, Laurie L; Fitzpatrick Bs, Mairen E; Hallum Bs, Olga; Sutton Bs, Amy M; Lonart, György; Sanford, Larry D

    2017-04-01

    Stressful events can directly produce significant alterations in subsequent sleep, in particular rapid eye movement sleep (REM); however, the neural mechanisms underlying the process are not fully known. Here, we investigated the role of the basolateral nuclei of the amygdala (BLA) in regulating the effects of stressful experience on sleep. We used optogenetics to briefly inhibit glutamatergic cells in BLA during the presentation of inescapable footshock (IS) and assessed effects on sleep, the acute stress response, and fear memory. c-Fos expression was also assessed in the amygdala and the medial prefrontal cortex (mPFC), both regions involved in coping with stress, and in brain stem regions implicated in the regulation of REM. Compared to control mice, peri-shock inhibition of BLA attenuated an immediate reduction in REM after IS and produced a significant overall increase in REM. Moreover, upon exposure to the shock context alone, mice receiving peri-shock inhibition of BLA during training showed increased REM without altered freezing (an index of fear memory) or stress-induced hyperthermia (an index of acute stress response). Inhibition of BLA during REM under freely sleeping conditions enhanced REM only when body temperature was high, suggesting the effect was influenced by stress. Peri-shock inhibition of BLA also led to elevated c-Fos expression in the central nucleus of the amygdala and mPFC and differentially altered c-Fos activity in the selected brain stem regions. Glutamatergic cells in BLA can modulate the effects of stress on REM and can mediate effects of fear memory on sleep that can be independent of behavioral fear. © Sleep Research Society 2017. Published by Oxford University Press on behalf of the Sleep Research Society. All rights reserved. For permissions, please e-mail journals.permissions@oup.com.

  3. The effect of BLA GABAB receptors in anxiolytic-like effect and aversive memory deficit induced by ACPA

    Directory of Open Access Journals (Sweden)

    Katayoon Kangarlu Haghighi

    2016-07-01

    Full Text Available Background: As a psychoactive plant, Cannabis sativa (Marijuana is widely used throughout the world. Several investigations have indicated that administration of Marijuana affects various cognitive and non-cognitive behaviors. These include anxiety-like behaviors and learning and memory deficit. It has been shown that three main cannabinoid receptors [i.e. CB1, CB2 and CB3 are involved in cannabinoids’ functions. CB1 receptors are abundantly expressed in the central nervous system regions such as hippocampus, amygdala, cerebellum and the cortex. Therefore, the neuropsychological functions of endocannabinoids are thought to be more linked to CB1 receptors. Among other brain regions, CB1 is highly expressed in the amygdala which is an integral component of the limbic circuitry. The amygdala plays a major role in the control of emotional behavior, including conditioned fear and anxiety. In present study we examined the possible roles of basolateral amygdala (BLA GABAB receptors in arachydonilcyclopropylamide (ACPA-induced anxiolytic-like effect and aversive memory deficit in adult male mice. Methods: This experimental study was conducted from September 2013 to December 2014 in Institute for Studies in Theoretical Physics and Mathematics, School of Cognitive Sciences, Tehran and Male albino NMRI mice (Pasture Institute, Iran, weighting 27-30 g, were used. Bilateral guide-cannulae were implanted to allow intra BLA microinjection of the drugs. We used Elevated Plus Maze (EPM to examine memory and anxiety behavior (test-retest protocol. ACPA administrate intra-peritoneal and GABAB agonist and antagonist administrated intra-amygdala. Results: Data showed that pre-test treatment with ACPA induced anxiolytic-like and aversive memory deficit The results revealed that pre-test intra-BLA infusion of baclofen (GABAB receptor agonist impaired the aversive memory while phaclofen (GABAB receptor antagonist improved it. Interestingly, pretreatment with a sub

  4. Detection of the IncX3 plasmid carrying blaKPC-3 in a Serratia marcescens strain isolated from a kidney-liver transplanted patient.

    Science.gov (United States)

    Gona, Floriana; Caio, Carla; Iannolo, Gioacchin; Monaco, Francesco; Di Mento, Giuseppina; Cuscino, Nicola; Fontana, Ignazio; Panarello, Giovanna; Maugeri, Gaetano; Mezzatesta, Maria Lina; Stefani, Stefania; Conaldi, Pier Giulio

    2017-10-01

    Dissemination of resistance to carbapenems among Enterobacteriaceae through plasmids is an increasingly important concern in health care worldwide. Here we report the first description of an IncX3 plasmid carrying the blaKPC-3 gene in a strain of Serratia marcescens isolated from a kidney-liver transplanted patient at the transplantation centre ISMETT (Istituto Mediterraneo per i Trapianti e Terapie ad Alta Specializzazione, Palermo, Italy). To localize the transposable element containing the resistance-associated gene Next-Generation Sequencing of the bacterial DNA was performed. S. marcescens was positive for blaKPC-3 and blaSHV-11 genes. The molecular analysis demonstrated that the blaKPC-3 gene of this bacterial strain was located in one copy of the Tn-3-like element Tn4401-a carried in a plasmid that is 53 392 bp in size and showed the typical IncX3 scaffold. Our data demonstrated the presence of a new blaKPC-3 harbouring the IncX3 plasmid in S. marcescens. The possible dissemination among Enterobacteriaceae of this type of plasmid should be monitored and evaluated in terms of clinical risk.

  5. Persistence of Multidrug-Resistant Acinetobacter baumannii Isolates Harboring blaOXA-23 and bap for 5 Years.

    Science.gov (United States)

    Sung, Ji Youn; Koo, Sun Hoe; Kim, Semi; Kwon, Gye Cheol

    2016-08-28

    The emergence and dissemination of carbapenemase-producing Acinetobacter baumannii isolates have been reported worldwide, and A. baumannii isolates harboring blaOXA-23 are often resistant to various antimicrobial agents. Antimicrobial resistance can be particularly strong for biofilm-forming A. baumannii isolates. We investigated the genetic basis for carbapenem resistance and biofilm-forming ability of multidrug-resistant (MDR) clinical isolates. Ninety-two MDR A. baumannii isolates were collected from one university hospital located in the Chungcheong area of Korea over a 5-year period. Multiplex PCR and DNA sequencing were performed to characterize carbapenemase and bap genes. Clonal characteristics were analyzed using REP-PCR. In addition, imaging and quantification of biofilms were performed using a crystal violet assay. All 92 MDR A. baumannii isolates involved in our study contained the blaOXA-23 and bap genes. The average absorbance of biomass in Bap-producing strains was much greater than that in non-Bap-producing strains. In our study, only three REP-PCR types were found, and the isolates showing type A or type B were found more than 60 times among unique patients during the 5 years of surveillance. These results suggest that the isolates have persisted and colonized for 5 years, and biofilm formation ability has been responsible for their persistence and colonization.

  6. Characterization of ST258 Colistin-Resistant, blaKPC-Producing Klebsiella pneumoniae in a Greek Hospital.

    Science.gov (United States)

    Mavroidi, Angeliki; Katsiari, Maria; Likousi, Sofia; Palla, Eleftheria; Roussou, Zoi; Nikolaou, Charikleia; Maguina, Asimina; Platsouka, Evangelia D

    2016-07-01

    The emergence of colistin resistance may further contribute to treatment failure of infection caused by multidrug-resistant (MDR) Klebsiella pneumoniae. The colistin resistance rates were determined and colistin-resistant carbapenemase-producing K. pneumoniae (COL-R CP-Kp) were characterized over an 18-month period in a Greek hospital. Out of 135 carbapenemase producers, 19 isolates (14%) were categorized as resistant to colistin. Phenotypic and molecular characterization of the COL-R CP-Kp isolates revealed that all were MDR blaKPC producers and, excluding one isolate of MLST ST383, belonged to the international clonal lineage ST258. Furthermore, PCR amplification and sequencing of the mgrB locus revealed nucleotide sequences of different sizes and insertions of IS1- and IS5-like mobile elements. The majority (63%) of the COL-R blaKPC producers was recovered from patients in the intensive care unit (ICU) and clinical data indicated that all patients should have acquired these isolates in the ICU. The findings of the present study underscore a concerning evolution of colistin resistance in a setting of high K. pneumoniae carbapenemase (KPC)-Kp endemicity, such as Greece. Thus, continuous surveillance, molecular characterization, prudent use of antibiotics, and implementation of infection control measures for K. pneumoniae are urgent.

  7. Characterization of Tn3000, a Transposon Responsible for blaNDM-1 Dissemination among Enterobacteriaceae in Brazil, Nepal, Morocco, and India.

    Science.gov (United States)

    Campos, Juliana Coutinho; da Silva, Maria José Félix; dos Santos, Paulo Roberto Nascimento; Barros, Elaine Menezes; Pereira, Mayne de Oliveira; Seco, Bruna Mara Silva; Magagnin, Cibele Massotti; Leiroz, Leonardo Kalab; de Oliveira, Théo Gremen Mimary; de Faria-Júnior, Célio; Cerdeira, Louise Teixeira; Barth, Afonso Luís; Sampaio, Suely Carlos Ferreira; Zavascki, Alexandre Prehn; Poirel, Laurent; Sampaio, Jorge Luiz Mello

    2015-12-01

    In Enterobacteriaceae, the blaNDM genes have been found in many different genetic contexts, and a wide diversity of plasmid scaffolds bearing those genes has been found. In August 2013, we identified NDM-1-producing Escherichia coli and Enterobacter hormaechei strains from a single rectal swab sample from a patient hospitalized in Rio de Janeiro, Brazil, who had no history of travel abroad. Complete DNA sequencing using the Illumina platform and annotation of the two plasmids harboring the blaNDM-1 gene, one from each strain, showed that they belonged to incompatibility groups IncFIIK and IncX3 and harbored a novel transposon named Tn3000. Similar genetic structures have been identified among other isolates in Brazil but also on plasmids from other continents. Our findings suggest that the blaNDM-1 gene may be transmitted by Tn3000 in different parts of the world. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

  8. Double Copies of bla(KPC-3)::Tn4401a on an IncX3 Plasmid in Klebsiella pneumoniae Successful Clone ST512 from Italy.

    Science.gov (United States)

    Fortini, Daniela; Villa, Laura; Feudi, Claudia; Pires, João; Bonura, Celestino; Mammina, Caterina; Endimiani, Andrea; Carattoli, Alessandra

    2016-01-01

    A carbapenem-resistant sequence type 512 (ST512) Klebsiella pneumoniae carbapenemase 3 (KPC-3)-producing K. pneumoniae strain showing a novel variant plasmid content was isolated in Palermo, Italy, in 2014. ST512 is a worldwide successful clone associated with the spread of bla(KPC) genes located on the IncFIIk pKpQIL plasmid. In our ST512 strain, the bla(KPC-3) gene was unusually located on an IncX3 plasmid, whose complete sequence was determined. Two copies of bla(KPC-3)::Tn4401a caused by intramolecular transposition events were detected in the plasmid. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

  9. Complete sequencing of the bla(NDM-1)-positive IncA/C plasmid from Escherichia coli ST38 isolate suggests a possible origin from plant pathogens.

    Science.gov (United States)

    Sekizuka, Tsuyoshi; Matsui, Mari; Yamane, Kunikazu; Takeuchi, Fumihiko; Ohnishi, Makoto; Hishinuma, Akira; Arakawa, Yoshichika; Kuroda, Makoto

    2011-01-01

    The complete sequence of the plasmid pNDM-1_Dok01 carrying New Delhi metallo-β-lactamase (NDM-1) was determined by whole genome shotgun sequencing using Escherichia coli strain NDM-1_Dok01 (multilocus sequence typing type: ST38) and the transconjugant E. coli DH10B. The plasmid is an IncA/C incompatibility type composed of 225 predicted coding sequences in 195.5 kb and partially shares a sequence with bla(CMY-2)-positive IncA/C plasmids such as E. coli AR060302 pAR060302 (166.5 kb) and Salmonella enterica serovar Newport pSN254 (176.4 kb). The bla(NDM-1) gene in pNDM-1_Dok01 is terminally flanked by two IS903 elements that are distinct from those of the other characterized NDM-1 plasmids, suggesting that the bla(NDM-1) gene has been broadly transposed, together with various mobile elements, as a cassette gene. The chaperonin groES and groEL genes were identified in the bla(NDM-1)-related composite transposon, and phylogenetic analysis and guanine-cytosine content (GC) percentage showed similarities to the homologs of plant pathogens such as Pseudoxanthomonas and Xanthomonas spp., implying that plant pathogens are the potential source of the bla(NDM-1) gene. The complete sequence of pNDM-1_Dok01 suggests that the bla(NDM-1) gene was acquired by a novel composite transposon on an extensively disseminated IncA/C plasmid and transferred to the E. coli ST38 isolate.

  10. Complete sequence of the IncA/C1 plasmid pCf587 carrying blaPER-2 from Citrobacter freundii.

    Science.gov (United States)

    Ruggiero, Melina; Girlich, Delphine; Dabos, Laura; Power, Pablo; Naas, Thierry; Gutkind, Gabriel

    2018-02-20

    The bla PER-2 harboring plasmid pCf587 (191,541 bp) belongs to lineage IncA/C 1 and is closely related to pRA1. It contains a large resistance island including the bla PER-2 gene between two copies of IS Kox2 -like elements, the toxin-antitoxin module pemK-pemI, several other resistance genes inserted within a Tn 2 transposon, a Tn 21 -like structure, and a class 1 integron. pCf587 belongs into ST 13, a new pMLST. Copyright © 2018 American Society for Microbiology.

  11. Phenotypic and molecular detection of the bla KPC gene in clinical isolates from inpatients at hospitals in São Luis, MA, Brazil.

    Science.gov (United States)

    Ribeiro, Patricia Cristina Saldanha; Monteiro, Andrea Souza; Marques, Sirlei Garcia; Monteiro, Sílvio Gomes; Monteiro-Neto, Valério; Coqueiro, Martina Márcia Melo; Marques, Ana Cláudia Garcia; de Jesus Gomes Turri, Rosimary; Santos, Simone Gonçalves; Bomfim, Maria Rosa Quaresma

    2016-12-07

    Bacteria that produce Klebsiella pneumoniae carbapenemases (KPCs) are resistant to broad-spectrum β-lactam antibiotics. The objective of this study was to phenotypically and genotypically characterize the antibiotic susceptibility to carbapenems of 297 isolates recovered from clinical samples obtained from inpatients at 16 hospitals in São Luis (Maranhão, Brazil). The study was conducted using phenotypic tests and molecular methods, including polymerase chain reaction (PCR), sequencing and enterobacterial repetitive intergenic consensus (ERIC)-PCR. The nonparametric chi-square test of independence was used to evaluate the associations between the bacterial bla KPC gene and the modified Hodge test, and the chi-square adherence test was used to assess the frequency of carbapenemases and their association with the bla KPC gene. The most frequently isolated species were Acinetobacter baumannii (n = 128; 43.0%), K. pneumoniae (n = 75; 25.2%), and Pseudomonas aeruginosa (n = 42; 14.1%). Susceptibility assays showed that polymixin B was active against 89.3% of the bacterial isolates. The Acinetobacter spp. and K. pneumoniae strains were susceptible to amikacin and tigecycline, and Pseudomonas spp. were sensitive to gentamicin and amikacin. Among the 297 isolates, 100 (33.7%) were positive for the bla KPC gene, including non-fermentative bacteria (A. baumannii) and Enterobacteriaceae species. Among the isolates positive for the bla KPC gene, K. pneumoniae isolates had the highest positivity rate of 60.0%. The bla KPC gene variants detected included KPC-2, which was found in all isolates belonging to species of the Enterobacteriaceae family. KPC-2 and KPC-3 were observed in A. baumannii isolates. Importantly, the bla KPC gene was also detected in three Raoultella isolates and one isolate of the Pantoea genus. ERIC-PCR patterns showed a high level of genetic diversity among the bacterial isolates; it was capable of distinguishing 34 clones among 100 strains

  12. Statistical and Computational Techniques in Manufacturing

    CERN Document Server

    2012-01-01

    In recent years, interest in developing statistical and computational techniques for applied manufacturing engineering has been increased. Today, due to the great complexity of manufacturing engineering and the high number of parameters used, conventional approaches are no longer sufficient. Therefore, in manufacturing, statistical and computational techniques have achieved several applications, namely, modelling and simulation manufacturing processes, optimization manufacturing parameters, monitoring and control, computer-aided process planning, etc. The present book aims to provide recent information on statistical and computational techniques applied in manufacturing engineering. The content is suitable for final undergraduate engineering courses or as a subject on manufacturing at the postgraduate level. This book serves as a useful reference for academics, statistical and computational science researchers, mechanical, manufacturing and industrial engineers, and professionals in industries related to manu...

  13. Manufactured volvulus.

    Science.gov (United States)

    Zweifel, Noemi; Meuli, Martin; Subotic, Ulrike; Moehrlen, Ueli; Mazzone, Luca; Arlettaz, Romaine

    2013-06-01

    Malrotation with a common mesentery is the classical pathology allowing midgut volvulus to occur. There are only a few reports of small bowel volvulus without malrotation or other pathology triggering volvulation. We describe three cases of small bowel volvulus in very premature newborns with a perfectly normal intra-abdominal anatomy and focus on the question, what might have set off volvulation. In 2005 to 2008, three patients developed small bowel volvulus without any underlying pathology. Retrospective patient chart review was performed with special focus on clinical presentation, preoperative management, intraoperative findings, and potential causative explanations. Mean follow-up period was 46 months. All patients were born between 27 and 31 weeks (mean 28 weeks) with a birth weight between 800 and 1,000 g (mean 887 g). They presented with an almost identical pattern of symptoms including sudden abdominal distension, abdominal tenderness, erythema of the abdominal wall, high gastric residuals, and radiographic signs of ileus. All of them were treated with intensive abdominal massage or pelvic rotation to improve bowel movement before becoming symptomatic. Properistaltic maneuvers including abdominal massage and pelvic rotation may cause what we term a "manufactured" volvulus in very premature newborns. Thus, this practice was stopped. Georg Thieme Verlag KG Stuttgart · New York.

  14. The impact of fit manufacturing on green manufacturing: A review

    Science.gov (United States)

    Qi, Ang Nian; Sin, Tan Chan; Fathullah, M.; Lee, C. C.

    2017-09-01

    Fit manufacturing and Green manufacturing are a new trend principle and concept. They are getting popular in industrial. This paper is identifying the impact between Fit manufacturing and Green manufacturing. Besides Fit manufacturing, Lean manufacturing, Agile manufacturing and Sustainable manufacturing gives big impacts to Green Manufacturing. On top of that, this paper also discuss the benefits of applying Fit manufacturing and Green manufacturing in industrial as well as environment. Hence, applications of Fit manufacturing and Green Manufacturing are increasing year by year.

  15. Investigation of Extensively Drug-Resistant blaOXA-23-Producing Acinetobacter baumannii Spread in a Greek Hospital.

    Science.gov (United States)

    Mavroidi, Angeliki; Katsiari, Maria; Palla, Eleftheria; Likousi, Sofia; Roussou, Zoi; Nikolaou, Charikleia; Platsouka, Evangelia D

    2017-06-01

    A rapid increase was observed in the incidence of extensively drug-resistant Acinetobacter baumannii (XDR Aba) isolates in a Greek hospital during 2014. To investigate the causes of this rise, the antimicrobial resistance profiles of all carbapenem-resistant (CARB-R) Aba isolates recovered during 2014-2015 were determined. Selected XDR Aba isolates (n = 13) were characterized by molecular methods. XDR Aba (48 isolates) represented 21.4% of the 224 CARB-R Aba recovered during the study period. The 13 selected XDR Aba isolates were positive for the blaOXA-23, the intrinsic blaOXA-51, and the adeB gene of the AdeABC efflux pump, and all belonged to the 3LST ST101, corresponding to the international clone II. Three bloodstream isolates possessed two amino acid substitutions (A138T+A226V) in the deduced amino acid sequences of the pmrB gene, which may be implicated in colistin resistance. This study demonstrates that this clone still evolves by obtaining an ever-increasing arsenal of antibiotic resistance mechanisms. The clinical characteristics of the intensive care unit (ICU) patients with XDR Aba were reviewed retrospectively. Infected ICU patients with XDR Aba displayed higher death rates compared with infected ICU patients susceptible to colistin and tigecycline CARB-R Aba, although there were no statistically significant differences. Conclusively, continuous surveillance and molecular characterization of XDR Aba, combined with strict infection control measures are mandatory for combating nosocomial infections caused by this organism.

  16. Correlation of phenotypic tests with the presence of the blaZ gene for detection of beta-lactamase.

    Science.gov (United States)

    Ferreira, Adriano Martison; Martins, Katheryne Benini; Silva, Vanessa Rocha da; Mondelli, Alessandro Lia; Cunha, Maria de Lourdes Ribeiro de Souza da

    Staphylococcus aureus and Staphylococcus saprophyticus are the most common and most important staphylococcal species associated with urinary tract infections. The objective of the present study was to compare and to evaluate the accuracy of four phenotypic methods for the detection of beta-lactamase production in Staphylococcus spp. Seventy-three strains produced a halo with a diameter ≤28mm (penicillin resistant) and all of them were positive for the blaZ gene. Among the 28 susceptible strain (halo ≥29mm), 23 carried the blaZ gene and five did not. The zone edge test was the most sensitive (90.3%), followed by MIC determination (85.5%), but the specificity of the former was low (40.0%). The nitrocefin test was the least sensitive (28.9%). However, the nitrocefin test together with the disk diffusion method showed the highest specificity (100%). The present results demonstrated that the zone edge test was the most sensitive phenotypic test for detection of beta-lactamase, although it is still not an ideal test to detect this type of resistance since its specificity was low. However, the inhibition halo diameter of the penicillin disk can be used together with the zone edge test since the same disk is employed in the two tests. Combined analysis of the two tests shows a sensitivity of 90.3% and specificity of 100%, proving better sensitivity, especially for S. saprophyticus. This is a low-cost test of easy application and interpretation that can be used in small and medium-sized laboratories where susceptibility testing is usually performed by the disk diffusion method. Copyright © 2016 Sociedade Brasileira de Microbiologia. Published by Elsevier Editora Ltda. All rights reserved.

  17. Correlation of phenotypic tests with the presence of the blaZ gene for detection of beta-lactamase

    Directory of Open Access Journals (Sweden)

    Adriano Martison Ferreira

    Full Text Available Abstract Staphylococcus aureus and Staphylococcus saprophyticus are the most common and most important staphylococcal species associated with urinary tract infections. The objective of the present study was to compare and to evaluate the accuracy of four phenotypic methods for the detection of beta-lactamase production in Staphylococcus spp. Seventy-three strains produced a halo with a diameter ≤28 mm (penicillin resistant and all of them were positive for the blaZ gene. Among the 28 susceptible strain (halo ≥29 mm, 23 carried the blaZ gene and five did not. The zone edge test was the most sensitive (90.3%, followed by MIC determination (85.5%, but the specificity of the former was low (40.0%. The nitrocefin test was the least sensitive (28.9%. However, the nitrocefin test together with the disk diffusion method showed the highest specificity (100%. The present results demonstrated that the zone edge test was the most sensitive phenotypic test for detection of beta-lactamase, although it is still not an ideal test to detect this type of resistance since its specificity was low. However, the inhibition halo diameter of the penicillin disk can be used together with the zone edge test since the same disk is employed in the two tests. Combined analysis of the two tests shows a sensitivity of 90.3% and specificity of 100%, proving better sensitivity, especially for S. saprophyticus. This is a low-cost test of easy application and interpretation that can be used in small and medium-sized laboratories where susceptibility testing is usually performed by the disk diffusion method.

  18. Advanced Manufacturing Technologies

    Science.gov (United States)

    Fikes, John

    2016-01-01

    Advanced Manufacturing Technologies (AMT) is developing and maturing innovative and advanced manufacturing technologies that will enable more capable and lower-cost spacecraft, launch vehicles and infrastructure to enable exploration missions. The technologies will utilize cutting edge materials and emerging capabilities including metallic processes, additive manufacturing, composites, and digital manufacturing. The AMT project supports the National Manufacturing Initiative involving collaboration with other government agencies.

  19. A Carbapenem-Resistant Pseudomonas aeruginosa Isolate Harboring Two Copies of blaIMP-34 Encoding a Metallo-β-Lactamase.

    Directory of Open Access Journals (Sweden)

    Tatsuya Tada

    Full Text Available A carbapenem-resistant strain of Pseudomonas aeruginosa, NCGM1984, was isolated in 2012 from a hospitalized patient in Japan. Immunochromatographic assay showed that the isolate was positive for IMP-type metallo-β-lactamase. Complete genome sequencing revealed that NCGM1984 harbored two copies of blaIMP-34, located at different sites on the chromosome. Each blaIMP-34 was present in the same structures of the class 1 integrons, tnpA(ISPa7-intI1-qacG-blaIMP-34-aac(6'-Ib-qacEdelta1-sul1-orf5-tniBdelta-tniA. The isolate belonged to multilocus sequence typing ST235, one of the international high-risk clones. IMP-34, with an amino acid substitution (Glu126Gly compared with IMP-1, hydrolyzed all β-lactamases tested except aztreonam, and its catalytic activities were similar to IMP-1. This is the first report of a clinical isolate of an IMP-34-producing P. aeruginosa harboring two copies of blaIMP-34 on its chromosome.

  20. Complete nucleotide sequence of pGA45, a 140,698-bp incFIIY plasmid encoding blaIMI-3-mediated carbapenem resistance, from river sediment

    Directory of Open Access Journals (Sweden)

    Bingjun eDang

    2016-02-01

    Full Text Available Plasmid pGA45 was isolated from the sediment of Haihe River using E. coli CV601 (gfp-tagged as recipients and indigenous bacteria from sediment as donors. This plasmid confers reduced susceptibility to imipenem which belongs to carbapenem group. Plasmid pGA45 was fully sequenced on an Illumina HiSeq 2000 sequencing system. The complete sequence of plasmid pGA45 was 140,698 bp in length with an average G+C content of 52.03%. Sequence analysis shows that pGA45 belongs to incFIIY group and harbors a backbone region shares high homology and gene synteny to several other incF plasmids including pNDM1_EC14653, pYDC644, pNDM-Ec1GN574, pRJF866, pKOX_NDM1 and pP10164-NDM. In addition to the backbone region, plasmid pGA45 harbors two notable features including one blaIMI-3-containing region and one type VI secretion system region. The blaIMI-3-containing region is responsible for bacteria carbapenem resistance and the type VI secretion system region is probably involved in bacteria virulence, respectively. Plasmid pGA45 represents the first complete nucleotide sequence of the blaIMI-harboring plasmid from environment sample and the sequencing of this plasmid provided insight into the architecture used for the dissemination of blaIMI carbapenemase genes.

  1. Complete Sequence of Four Multidrug-Resistant MOBQ1 Plasmids Harboring blaGES-5 Isolated from Escherichia coli and Serratia marcescens Persisting in a Hospital in Canada.

    Science.gov (United States)

    Boyd, David; Taylor, Geoffrey; Fuller, Jeff; Bryce, Elizabeth; Embree, Joanne; Gravel, Denise; Katz, Kevin; Kibsey, Pamela; Kuhn, Magdalena; Langley, Joanne; Mataseje, Laura; Mitchell, Robyn; Roscoe, Diane; Simor, Andrew; Thomas, Eva; Turgeon, Nathalie; Mulvey, Michael

    2015-06-01

    The usefulness of carbapenems for gram-negative infections is becoming compromised by organisms harboring carbapenemases, enzymes which can hydrolyze the drug. Currently KPC (class A), NDM (class B), and OXA-48 types (class D) are the most globally widespread carbapenemases. However, among the GES-type class A extended-spectrum β-lactamases (ESBLs) there are variants that hydrolyze carbapenems, with blaGES-5 being the most common. Two Escherichia coli and two Serratia marcescens harboring blaGES-5 on plasmids were isolated by the Canadian Nosocomial Infection Surveillance Program (CNISP) from four different patients in a single hospital over a 2-year period. Complete sequencing of the blaGES-5 plasmids indicated that all four had nearly identical backbones consisting of genes for replication, partitioning, and stability, but contained variant accessory regions consisting of mobile elements and antimicrobial resistance genes. The plasmids were of a novel replicon type, but belonged to the MOBQ1 group based on relaxase sequences, and appeared to be mobilizable, but not self-transmissible. Considering the time periods of bacterial isolation, it would appear the blaGES-5 plasmid has persisted in an environmental niche for at least 2 years in the hospital. This has implications for infection control and clinical care when it is transferred to clinically relevant gram-negative organisms.

  2. Low Frequency of Ceftazidime-Avibactam Resistance among Enterobacteriaceae Isolates Carrying blaKPC Collected in U.S. Hospitals from 2012 to 2015.

    Science.gov (United States)

    Castanheira, Mariana; Mendes, Rodrigo E; Sader, Helio S

    2017-03-01

    Klebsiella pneumoniae carbapenemase (KPC)-producing Enterobacteriaceae isolates have been increasingly reported worldwide, and therapeutic options to treat infections caused by these organisms are limited. We evaluated the activity of ceftazidime-avibactam and comparators against 456 Enterobacteriaceae isolates carrying bla KPC collected from 79 U.S. hospitals during 2012 to 2015. Overall, ceftazidime-avibactam (MIC 50/90 , 0.5/2 μg/ml; 99.3% susceptible) and tigecycline (MIC 50/90 , 0.5/1 μg/ml; 98.9% susceptible at ≤2 μg/ml) were the most active agents. Only 80.5% and 59.0% of isolates were susceptible to colistin and amikacin, respectively. All three isolates (0.7%) displaying resistance to ceftazidime-avibactam ( K. pneumoniae ; MICs, ≥16 μg/ml) were evaluated using whole-genome sequencing analysis and relative quantification of expression levels of porins and efflux pump. Two isolates carried metallo-β-lactamase genes, bla NDM-1 or bla VIM-4 , among other β-lactam resistance mechanisms, and one displayed a premature stop codon in ompK35 and decreased expression of ompK36 Ceftazidime-avibactam was active against 100.0 and 99.3% of isolates carrying bla KPC-3 ( n = 221) and bla KPC-2 ( n = 145), respectively. Isolates carrying bla KPC were more commonly recovered from pneumonia ( n = 155), urinary tract ( n = 93), and skin/soft tissue ( n = 74) infections. Ceftazidime-avibactam (97.8 to 100.0% susceptible) was consistently active against isolates from all infection sites. K. pneumoniae (83.3% of the collection) susceptibility rates were 99.2% for ceftazidime-avibactam, 98.9% for tigecycline, and 80.1% for colistin. Ceftazidime-avibactam susceptibility did not vary substantially when comparing isolates from intensive care unit (ICU) patients to those from non-ICU patients. Ceftazidime-avibactam was active against this large collection of isolates carrying bla KPC and represents a valuable addition to the armamentarium currently available for the

  3. Capillary Sharp Inner Edge Manufacturing

    Czech Academy of Sciences Publication Activity Database

    Hošek, Jan; Studenovský, K.; Najdek, D.

    2009-01-01

    Roč. 19, č. 35 (2009), s. 19-25 ISSN 1584-5982. [MECAHITECH 09 /1./. Bukurešť, 08.10.2009-09.10.2009] R&D Projects: GA AV ČR IAA200760905 Institutional research plan: CEZ:AV0Z20760514 Keywords : capillary * edge * manufacturing Subject RIV: JR - Other Machinery

  4. Norwegian patients and retail chicken meat share cephalosporin-resistant Escherichia coli and IncK/blaCMY-2 resistance plasmids.

    Science.gov (United States)

    Berg, E S; Wester, A L; Ahrenfeldt, J; Mo, S S; Slettemeås, J S; Steinbakk, M; Samuelsen, Ø; Grude, N; Simonsen, G S; Løhr, I H; Jørgensen, S B; Tofteland, S; Lund, O; Dahle, U R; Sunde, M

    2017-06-01

    In 2012 and 2014 the Norwegian monitoring programme for antimicrobial resistance in the veterinary and food production sectors (NORM-VET) showed that 124 of a total of 406 samples (31%) of Norwegian retail chicken meat were contaminated with extended-spectrum cephalosporin-resistant Escherichia coli. The aim of this study was to compare selected cephalosporin-resistant E. coli from humans and poultry to determine their genetic relatedness based on whole genome sequencing (WGS). Escherichia coli representing three prevalent cephalosporin-resistant multi-locus sequence types (STs) isolated from poultry (n=17) were selected from the NORM-VET strain collections. All strains carried an IncK plasmid with a bla CMY-2 gene. Clinical E. coli isolates (n=284) with AmpC-mediated resistance were collected at Norwegian microbiology laboratories from 2010 to 2014. PCR screening showed that 29 of the clinical isolates harboured both IncK and bla CMY-2 . All IncK/bla CMY-2 -positive isolates were analysed with WGS-based bioinformatics tools. Analysis of single nucleotide polymorphisms (SNP) in 2.5 Mbp of shared genome sequences showed close relationship, with fewer than 15 SNP differences between five clinical isolates from urinary tract infections (UTIs) and the ST38 isolates from poultry. Furthermore, all of the 29 clinical isolates harboured IncK/bla CMY-2 plasmid variants highly similar to the IncK/bla CMY-2 plasmid present in the poultry isolates. Our results provide support for the hypothesis that clonal transfer of cephalosporin-resistant E. coli from chicken meat to humans may occur, and may cause difficult-to-treat infections. Furthermore, these E. coli can be a source of AmpC-resistance plasmids for opportunistic pathogens in the human microbiota. Copyright © 2017 European Society of Clinical Microbiology and Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

  5. Historical Financial Data - Domestic Automobile Manufacturers

    Science.gov (United States)

    1979-01-01

    A historical financial data base was developed for the four major U.S. automobile manufacturers, focusing on the specific operations associated with production and marketing of automobiles and light trucks. The years subject to analysis were 1967-197...

  6. Manufacturing network evolution

    DEFF Research Database (Denmark)

    Yang, Cheng; Farooq, Sami; Johansen, John

    2011-01-01

    Purpose – This paper examines the effect of changes at the manufacturing plant level on other plants in the manufacturing network and also investigates the role of manufacturing plants on the evolution of a manufacturing network. Design/methodology/approach –The research questions are developed...... different manufacturing plants in the network and their impact on network transformation. Findings – The paper highlights the dominant role of manufacturing plants in the continuously changing shape of a manufacturing network. The paper demonstrates that a product or process change at one manufacturing...... by identifying the gaps in the reviewed literature. The paper is based on three case studies undertaken in Danish manufacturing companies to explore in detail their manufacturing plants and networks. The cases provide a sound basis for developing the research questions and explaining the interaction between...

  7. Semiconductors integrated circuit design for manufacturability

    CERN Document Server

    Balasinki, Artur

    2011-01-01

    Because of the continuous evolution of integrated circuit manufacturing (ICM) and design for manufacturability (DfM), most books on the subject are obsolete before they even go to press. That's why the field requires a reference that takes the focus off of numbers and concentrates more on larger economic concepts than on technical details. Semiconductors: Integrated Circuit Design for Manufacturability covers the gradual evolution of integrated circuit design (ICD) as a basis to propose strategies for improving return-on-investment (ROI) for ICD in manufacturing. Where most books put the spotl

  8. Detection of Ampicillin Resistance Genes (bla in Clinical Isolates of Escherichia coli with Polymerase Chain Reaction Method

    Directory of Open Access Journals (Sweden)

    Tiana Milanda

    2014-09-01

    Full Text Available Escherichia coli is a rod negative Gram which could be pathogenic, if its value increases or located in outer gastrointestinal tract. Pathogenic E. coli will produce enterotoxin which will cause diarrhoea or infection in urine tract. Ampicilin was one of particular antibiotics to overcome infection. Ampicilin nowadays is no longer used as primary medicine, because of its resistance case. The aim of this research is to detect the presence of gene which is responsible to ampicilin resistant E. coli. We used isolated midstream urine from cystitis object in Hasan Sadikin Hospital (RSHS as samples. Polymerase Chain Reaction (PCR method (colony-PCR and DNA-PCR were done to invenstigate the antibiotic resistency. Based on the result of antibiotic susceptibility testing to ampicillin, E. coli samples were resistant to ampicilin. Elektroforegram products of colony-PCR and DNA-PCR showed that the resistance case of ampicilin caused by bla gene (199 bp. Selective and rational antibiotic treatment is required to prevent ampicillin resistance in patients with symptoms

  9. Use of WGS data for investigation of a long-term NDM-1-producing Citrobacter freundii outbreak and secondary in vivo spread of blaNDM-1 to Escherichia coli, Klebsiella pneumoniae and Klebsiella oxytoca

    DEFF Research Database (Denmark)

    Hammerum, Anette M; Hansen, Frank; Linde Nielsen, Hans

    2016-01-01

    Objectives An outbreak of NDM-1-producing Citrobacter freundii and possible secondary in vivo spread of blaNDM-1 to other Enterobacteriaceae were investigated. Methods From October 2012 to March 2015, meropenem-resistant Enterobacteriaceae were detected in 45 samples from seven patients at Aalborg...... of recent travel abroad and the source of the blaNDM-1 plasmid was unknown. Conclusions To our knowledge, this is the first report of an NDM-1-producing C. freundii outbreak and secondary in vivo spread of an IncA/C2 plasmid with blaNDM-1 to other Enterobacteriaceae....

  10. Expanding subjectivities

    DEFF Research Database (Denmark)

    Lundgaard Andersen, Linda; Soldz, Stephen

    2012-01-01

    A major theme in recent psychoanalytic thinking concerns the use of therapist subjectivity, especially “countertransference,” in understanding patients. This thinking converges with and expands developments in qualitative research regarding the use of researcher subjectivity as a tool......-Saxon and continental traditions, this special issue provides examples of the use of researcher subjectivity, informed by psychoanalytic thinking, in expanding research understanding....

  11. Coexistence of blaOXA-23 with armA in quinolone-resistant Acinetobacter baumannii from a Chinese university hospital.

    Science.gov (United States)

    Shen, Min; Luan, Guangxin; Wang, Yanhong; Chang, Yaowen; Zhang, Chi; Yang, Jingni; Deng, Shanshan; Ling, Baodong; Jia, Xu

    2016-03-01

    A total of 101 Acinetobacter baumannii isolates were collected to determine the mechanisms of quinolone resistance and investigate the occurrence of carbapenem and high-level aminoglycoside resistance genes among quinolone-resistant strains. Among 77 quinolone-resistant A. baumannii harbored mutations of gyrA and parC, 41 isolates, which belonged to European clone II, had resistance to aminoglycosides and carbapenems due to the expression of armA and acquisition of blaOXA-23. Most of sequence type belonged to clonal complex 92. These results suggested hospital dissemination of multidrug-resistant A. baumannii carrying blaOXA-23, armA, and mutations of quinolone resistance-determining regions in western China. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. Characterization of IncN plasmids carrying blaCTX-M-1 and qnr genes in Escherichia coli and Salmonella from animals, the environment and humans

    DEFF Research Database (Denmark)

    Dolejska, Monika; Villa, Laura; Hasman, Henrik

    2013-01-01

    were compared using restriction fragment length polymorphism (RFLP), plasmid multilocus sequence typing (pMLST) and hybridization with repN, qnrS1, qnrB19 or blaCTX-M-1 probes. Plasmids pKT58A and pHHA45 were sequenced using the 454-Genome Sequencer FLX platform on a library constructed from plasmid...... DNA purified from the respective E. coli transformants.Results Three types of IncN plasmids carrying blaCTX-M-1, qnrS1 and qnrB19 genes were identified in strains isolated from the Czech Republic, Poland, Slovakia, Denmark, Italy and the Netherlands, corresponding to pMLST sequence type (ST) 1, ST3...

  13. pIMP-PH114 carrying bla IMP-4 in a Klebsiella pneumoniae strain is closely related to other multidrug-resistant IncA/C2 plasmids.

    Science.gov (United States)

    Ho, Pak-Leung; Lo, Wai-U; Chan, Jane; Cheung, Yuk-Yam; Chow, Kin-Hung; Yam, Wing-Cheong; Lin, Chi-Ho; Que, Tak-Lun

    2014-02-01

    The IncA/C plasmids are broad host-range vehicles which have been associated with wide dissemination of CMY-2 among Enterobacteriaceae of human and animal origins. Acquired metallo-β-lactamases (MBLs) such as the IMP-type enzymes are increasingly reported in multidrug-resistant Gram-negative bacteria worldwide, particularly in Enterobacteriaceae. We described the complete sequence of the first IMP-4-encoding IncA/C2 plasmid, pIMP-PH114 (151,885 bp), from a sequence type 1 Klebsiella pneumoniae strain that was recovered from a patient who was hospitalized in the Philippines. pIMP-PH114 consists of a backbone from the IncA/C2 plasmids, with the insertion of a novel Tn21-like class 1 integron composite structure (containing the cassette array bla IMP-4-qacG-aacA4-catB3, followed by a class C β-lactamase bla DHA-1 and the mercury resistance operon, merRTPCADE) and a sul2-floR encoding region. Phylogenetic analysis of the IncA/C repA sequences showed that pIMP-PH114 formed a subgroup with other IncA/C plasmids involved in the international spread of CMY-2, TEM-24 and NDM-1. Identical bla IMP-4 arrays have been described among different Enterobacteriaceae and Acinetobacter spp. in China, Singapore and Australia but the genetic context is different. The broad host range of IncA/C plasmids may have facilitated dissemination of the bla IMP-4 arrays among different diverse groups of bacteria.

  14. Outbreak of a novel Enterobacter sp. carrying blaCTX-M-15 in a neonatal unit of a tertiary care hospital in Tanzania.

    Science.gov (United States)

    Mshana, Stephen E; Gerwing, Lisa; Minde, Mercy; Hain, Torsten; Domann, Eugen; Lyamuya, Eligius; Chakraborty, Trinad; Imirzalioglu, Can

    2011-09-01

    Enterobacter hormaechei and Cronobacter sakazakii are amongst the most important causes of outbreaks of neonatal sepsis associated with powdered milk. In this study, we report for the first time an outbreak of a novel Enterobacter sp. harbouring bla(CTX-M-15) in a neonatal unit in Tanzania. Seventeen Gram-negative enteric isolates from neonatal blood cultures were studied. Antibiotic susceptibility was assessed by disc diffusion testing, and the presence of the bla(CTX-M-15) gene was established by polymerase chain reaction (PCR) and sequencing. Isolates were typed by pulsed-field gel electrophoresis (PFGE). Identification by biochemical profiling was followed by nucleotide sequencing of 16S ribosomal DNA (rDNA), rpoB and hsp60 alleles. Environmental sampling was done and control measures were established. Isolates were initially misidentified based on their fermentation characteristics and agglutination as Salmonella enterica serotype Paratyphi. All isolates were resistant to multiple antibiotics, except for ciprofloxacin and carbapenems, and were found to harbour bla(CTX-M-15) on a 291-kb narrow-range plasmid. PFGE analysis indicated the clonal outbreak of a single strain, infecting 17 neonates with a case fatality rate of 35%. The same strain was isolated from a milk bucket. Phylogenetic analysis using 16S rDNA, rpoB and hsp60 sequences permitted no definitive identification, clustering the strains in the Enterobacter cloacae complex with similarities of 92-98.8%. The data describe an outbreak of a novel bla(CTX-M-15)-positive, multiresistant Enterobacter strain in an African neonatal unit that can easily be misidentified taxonomically. These data highlight the need for constant surveillance of bacteria harbouring extended-spectrum β-lactamases as well as improvements in hygiene measures in developing countries. Copyright © 2011 Elsevier B.V. and the International Society of Chemotherapy. All rights reserved.

  15. Molecular epidemiology of bla OXA-23 -producing carbapenem-resistant Acinetobacter baumannii in a single institution over a 65-month period in north China.

    Science.gov (United States)

    Ning, Nian-Zhi; Liu, Xiong; Bao, Chun-Mei; Chen, Su-Ming; Cui, En-Bo; Zhang, Ju-Ling; Huang, Jie; Chen, Fang-Hong; Li, Tao; Qu, Fen; Wang, Hui

    2017-01-05

    Carbapenem-resistant Acinetobacter baumannii poses a significant threat to hospitalized patients, as few therapeutic options remain. Thus, we investigated the molecular epidemiology and mechanism of resistance of carbapenem-resistant A.baumannii isolates in Beijing, China. Carbapenem-resistant A.baumannii isolates (n = 101) obtained between June 2009 and November 2014 were used. Multilocus sequence typing (MLST) and PCR assays for class C and D β-lactamase were performed on all isolates. S1 nuclease pulsed-field gel electrophoresis (PFGE) and Southern blot hybridization were performed to identify the resistance gene location. All 101 A.baumannii isolates were highly resistant to frequently used antimicrobials, and were considered multidrug resistant. A total of 12 sequence types (STs) were identified, including 10 reported STs and 2 novel STs. Eighty-seven isolates were classified to clonal complex 92 (CC92), among which ST191 and ST195 were the most common STs. The bla OXA-23 gene was positive in most (n = 95) of the A.baumannii isolates. Using S1-nuclease digestion PFGE and Southern blot hybridization, 3 patterns of plasmids carrying bla OXA-23 were confirmed. ST191 and ST195 (both harboring bla OXA-23 ) caused outbreaks during the study period, and this is the first report of outbreaks caused by ST191 and ST195 in north China. bla OXA-23 -producing A.baumannii ST191 and ST 195 isolates can disseminate in a hospital and are potential nosocomial outbreak strains. Surveillance of imipenem-resistant A.baumannii and antimicrobial stewardship should be strengthened.

  16. E. coli encoding blaNDM-5 associated with community-acquired UTI cases with unusual MIC creep like phenomenon against Imipenem.

    Science.gov (United States)

    Gajamer, Varsha Rani; Bhattacharjee, Amitabha; Paul, Deepjyoti; Deshamukhya, Chandrayee; Singh, Ashish Kr; Pradhan, Nilu; Tiwari, Hare Krishna

    2018-05-15

    Carbapenemase-producing Escherichia coli are of major clinical concern. The present study aimed to identify NDM-5 producing E.coli associated with community-acquired urinary tract infection, co-harboring ESBL genes and a pattern of imipenem MIC creep. A total of 973 urine samples were collected from females of age between 18-49 diagnosed with UTI. Isolates were identified by standard microbiological procedures. Presence of bla NDM and ESBL genes was determined by PCR assay and sequencing.PCR based replicon typing was performed. Plasmid stability of all bla producers and their transformants study were analyzed by serial passages and MIC creep phenomenon was analysed by studying revertants. Among 34 bla NDM-5 positive E.coli isolates, 21 isolates co harbored bla CTX-M-15 , followed by multiple combinations of genes. The study revealed diverse types of plasmids type viz; HI1, I1, FIA+FIB, FIA and Y. The strains showed progressive plasmid loss after 31 passages.Twenty-eight isolates mostly had MIC value of 0.5μg/ml and 1μg/ml against imipenem, ertapenem and meropenem. However, on studying the MIC creep activity; the MIC was found elevated from 0.5ug/ml to 64μg/ml and from 1μg/ml to 128μg/ml. While analyzing the revertants, MIC of most of the NDM positive isolates was reduced to 16μg/ml after the 30th serial passages. This study observed a unique phenotype of NDM producers which is not been reported earlier. In the current study, the observed phenomenon poses a global threat as these pathogens may evade phenotypic screening by routine laboratories. Copyright © 2018. Published by Elsevier Ltd.

  17. Literature Review on Dynamic Cellular Manufacturing System

    Science.gov (United States)

    Nouri Houshyar, A.; Leman, Z.; Pakzad Moghadam, H.; Ariffin, M. K. A. M.; Ismail, N.; Iranmanesh, H.

    2014-06-01

    In previous decades, manufacturers faced a lot of challenges because of globalization and high competition in markets. These problems arise from shortening product life cycle, rapid variation in demand of products, and also rapid changes in manufcaturing technologies. Nowadays most manufacturing companies expend considerable attention for improving flexibility and responsiveness in order to overcome these kinds of problems and also meet customer's needs. By considering the trend toward the shorter product life cycle, the manufacturing environment is towards manufacturing a wide variety of parts in small batches [1]. One of the major techniques which are applied for improving manufacturing competitiveness is Cellular Manufacturing System (CMS). CMS is type of manufacturing system which tries to combine flexibility of job shop and also productivity of flow shop. In addition, Dynamic cellular manufacturing system which considers different time periods for the manufacturing system becomes an important topic and attracts a lot of attention to itself. Therefore, this paper made attempt to have a brief review on this issue and focused on all published paper on this subject. Although, this topic gains a lot of attention to itself during these years, none of previous researchers focused on reviewing the literature of that which can be helpful and useful for other researchers who intend to do the research on this topic. Therefore, this paper is the first study which has focused and reviewed the literature of dynamic cellular manufacturing system.

  18. High-level fluoroquinolone resistant Salmonella enterica serovar Kentucky ST198 epidemic clone with IncA/C conjugative plasmid carrying bla(CTX-M-25) gene.

    Science.gov (United States)

    Wasyl, Dariusz; Kern-Zdanowicz, Izabela; Domańska-Blicharz, Katarzyna; Zając, Magdalena; Hoszowski, Andrzej

    2015-01-30

    Multidrug resistant Salmonella Kentucky strains have been isolated from turkeys in Poland since 2009. Multiple mutations within chromosomal genes gyrA and parC were responsible for high-level ciprofloxacin resistance. One of the isolates was extended spectrum β-lactamase- (ESBL) positive: the strain 1643/2010 carried a conjugative 167,779 bps plasmid of IncA/C family. The sequence analysis revealed that it carried a blaCTX-M-25 gene and an integron with another β-lactamase encoding gene-blaOXA-21. This is the first known report of a CTX-M-25 encoding gene both in Poland and in Salmonella Kentucky world-wide, as well as in the IncA/C plasmid. Analysis of the integron showed a novel arrangement of gene cassettes-aacA4, aacC-A1 and blaOXA-21 where the latter might result from an intergeneric gene transfer. The study confirmed Salmonella Kentucky population isolated in Poland belongs to global epidemics of high level fluoroquinolone resistant clone ST198 that can carry rare β-lactamase genes. Copyright © 2014 Elsevier B.V. All rights reserved.

  19. 21 CFR 1303.21 - Individual manufacturing quotas.

    Science.gov (United States)

    2010-04-01

    ... controlled substance listed in Schedule I or II, and who applies for a manufacturing quota, an individual... basic class. Any manufacturing quota fixed and issued by the Administrator shall be subject to his... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Individual manufacturing quotas. 1303.21 Section...

  20. Appraising manufacturing location

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2002-01-01

    International location of manufacturing activities is an issue for managers of manufacturing companies as well as public policy makers. For managers, the issue is relevant because international locations offer opportunities for lowering costs due to productivity improvements. For governments the

  1. Manufacturing engineering and technology

    CERN Document Server

    Kalpakjian, Serope; Vijai Sekar, K S

    2014-01-01

    For courses in manufacturing processes at two- or four-year schools. An up-to-date text that provides a solid background in manufacturing processes. Manufacturing Engineering and Technology, SI Edition, 7e, presents a mostly qualitative description of the science, technology, and practice of manufacturing. This includes detailed descriptions of manufacturing processes and the manufacturing enterprise that will help introduce students to important concepts. With a total of 120 examples and case studies, up-to-date and comprehensive coverage of all topics, and superior two-color graphics, this text provides a solid background for manufacturing students and serves as a valuable reference text for professionals. Teaching and Learning Experience To provide a better teaching and learning experience, for both instructors and students, this program will: * Apply Theory and/or Research: An excellent overview of manufacturing conceptswith a balance of relevant fundamentals and real-world practices. * Engage Students: E...

  2. Additive Manufacturing Infrared Inspection

    Science.gov (United States)

    Gaddy, Darrell; Nettles, Mindy

    2015-01-01

    The Additive Manufacturing Infrared Inspection Task started the development of a real-time dimensional inspection technique and digital quality record for the additive manufacturing process using infrared camera imaging and processing techniques. This project will benefit additive manufacturing by providing real-time inspection of internal geometry that is not currently possible and reduce the time and cost of additive manufactured parts with automated real-time dimensional inspections which deletes post-production inspections.

  3. ACE - Manufacturer Identification Code (MID)

    Data.gov (United States)

    Department of Homeland Security — The ACE Manufacturer Identification Code (MID) application is used to track and control identifications codes for manufacturers. A manufacturer is identified on an...

  4. Prevalence of extended-spectrum cephalosporin-resistant Escherichia coli in a farrowing farm: ST1121 clone harboring IncHI2 plasmid contributes to the dissemination of blaCMY-2

    Directory of Open Access Journals (Sweden)

    Hui eDeng

    2015-11-01

    Full Text Available Abstract During a regular monitoring of antimicrobial resistance in a farrowing farm in Southern China, 117 Escherichia coli isolates were obtained from sows and piglets. Compared with the isolates from piglets, the isolates from sows exhibited higher resistance rates to the tested cephalosporins. Correspondingly, the total detection rate of the blaCMY-2/blaCTX-M genes in the sow isolates (34.2% was also significantly higher than that of the piglet isolates (13.6% (p<0.05. The blaCMY-2 gene had a relatively high prevalence (11.1% in the E. coli isolates. MLST and PFGE analysis revealed the clonal spread of ST1121 E. coli in most (7/13 of the blaCMY-2-positive isolates. An indistinguishable IncHI2 plasmid harboring blaCMY-2 was also identified in each of the seven ST1121 E. coli isolates. Complete sequence analysis of this IncHI2 plasmid (pEC5207 revealed that pEC5207 may have originated through recombination of an IncHI2 plasmid with a blaCMY-2-carrying IncA/C plasmid like pCFSAN007427_01. In addtion to blaCMY-2, pEC5207 also carried other resistance determinants for aminoglycosides (aacA7, sulfonamides (sul1, as well as heavy metals ions, such as Cu and Ag. The susceptibility testing showed that the pEC5207 can mediate both antibiotic and heavy metal resistance. This highlights the role of pEC5207 in co-selection of blaCMY-2-positive isolates under the selective pressure of heavy metals, cephalosporins and other antimicrobials. In conclusion, clonal spread of an ST1121 type E. coli strain harboring an IncHI2 plasmid contributed to the dissemination of blaCMY-2 in a farrowing farm in Southern China. We also have determined the first complete sequence analysis of a blaCMY-2-carrying IncHI2 plasmid.

  5. 31 CFR 500.412 - Process vs. manufacture.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Process vs. manufacture. 500.412 Section 500.412 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) OFFICE... Interpretations § 500.412 Process vs. manufacture. A commodity subject to § 500.204 remains subject howsoever it...

  6. Measuring Manufacturing Innovativeness

    DEFF Research Database (Denmark)

    Blichfeldt, Henrik; Knudsen, Mette Præst

    2017-01-01

    Globalization and customization increases the pressure on manufacturing companies, and the ability to provide innovativeness is a potential source of competitive advantage. This paper positions the manufacturing entity in the innovation process, and investigates the relation between innovation vers...... technology and organizational concepts. Based on Danish survey data from the European Manufacturing Survey (EMS-2015) this paper finds that there is a relation between innovative companies, and their level of technology and use of organizational concepts. Technology and organizational concepts act...... as manufacturing levers to support the manufacturing and production system to provide innovativeness. The managerial implication lies in building manufacturing capabilities to support the innovative process, by standardization, optimization and creating stability in combination with automation and advanced...

  7. Characterization of Acinetobacter baumannii clinical isolates carrying bla(OXA-23) carbapenemase and 16S rRNA methylase armA genes in Yemen.

    Science.gov (United States)

    Bakour, Sofiane; Alsharapy, Samer Ahmed; Touati, Abdelaziz; Rolain, Jean-Marc

    2014-12-01

    The aim of this study was to investigate the molecular support of resistance to carbapenems, aminoglycosides, and fluoroquinolones in Acinetobacter baumannii clinical isolates collected from Yemen hospital. Three A. baumannii were isolated in February 2013 from three patients hospitalized at Al-Thawra University Hospital in Sana'a, Yemen. Antibiotic susceptibility testing was performed using the disk diffusion and E-test methods. Carbapenemase production was carried out by the modified Hodge test (MHT) and imipenem-ethylenediaminetetraacetic acid (EDTA) methods. Carbapenem, aminoglycoside, and fluoroquinolone resistance determinants were studied by polymerase chain reaction and sequencing. The epidemiological relatedness of the three strains was studied using multilocus sequence typing (MLST). The isolates were resistant to almost all antibiotics tested with very high imipenem, amikacin, and ciprofloxacin minimum inhibitory concentrations (>32, >256, and >32 mg/L, respectively). The microbiological tests showed that the three A. baumannii were MHT positive, besides, the activity of β-lactamases was not inhibited by EDTA. All the three isolates contained the naturally occurring bla(OXA-51)-like gene and the bla(OXA-23)-like carbapenemase-encoding gene. The 16S rRNA methylase armA gene was detected in the three isolates. In addition, screening for genes encoding the aminoglycoside-modifying enzymes (AMEs) demonstrated that one isolate contained the acetyltransferase gene aac(6')-Ib. Fluoroquinolone resistance was associated with a single mutation Ser83Leu in the quinolone resistance determining region of the gyrA gene in all isolates. The MLST showed that the sequence type (ST) obtained corresponds to ST2 for the three strains. Here we report the first identification of multidrug-resistant A. baumannii isolates harboring the bla(OXA-23)-like gene, AMEs [aac(6')-Ib], and the 16S rRNA methylase (armA) in the Yemen hospital.

  8. A gratuitous β-Lactamase inducer uncovers hidden active site dynamics of the Staphylococcus aureus BlaR1 sensor domain.

    Science.gov (United States)

    Frederick, Thomas E; Peng, Jeffrey W

    2018-01-01

    Increasing evidence shows that active sites of proteins have non-trivial conformational dynamics. These dynamics include active site residues sampling different local conformations that allow for multiple, and possibly novel, inhibitor binding poses. Yet, active site dynamics garner only marginal attention in most inhibitor design efforts and exert little influence on synthesis strategies. This is partly because synthesis requires a level of atomic structural detail that is frequently missing in current characterizations of conformational dynamics. In particular, while the identity of the mobile protein residues may be clear, the specific conformations they sample remain obscure. Here, we show how an appropriate choice of ligand can significantly sharpen our abilities to describe the interconverting binding poses (conformations) of protein active sites. Specifically, we show how 2-(2'-carboxyphenyl)-benzoyl-6-aminopenicillanic acid (CBAP) exposes otherwise hidden dynamics of a protein active site that binds β-lactam antibiotics. When CBAP acylates (binds) the active site serine of the β-lactam sensor domain of BlaR1 (BlaRS), it shifts the time scale of the active site dynamics to the slow exchange regime. Slow exchange enables direct characterization of inter-converting protein and bound ligand conformations using NMR methods. These methods include chemical shift analysis, 2-d exchange spectroscopy, off-resonance ROESY of the bound ligand, and reduced spectral density mapping. The active site architecture of BlaRS is shared by many β-lactamases of therapeutic interest, suggesting CBAP could expose functional motions in other β-lactam binding proteins. More broadly, CBAP highlights the utility of identifying chemical probes common to structurally homologous proteins to better expose functional motions of active sites.

  9. Antimicrobial susceptibility, risk factors and prevalence of bla cefotaximase, temoneira, and sulfhydryl variable genes among Escherichia coli in community-acquired pediatric urinary tract infection.

    Science.gov (United States)

    Nisha, Kallyadan V; Veena, Shetty A; Rathika, Shenoy D; Vijaya, Shenoy M; Avinash, Shetty K

    2017-01-01

    The emergence of extended-spectrum beta-lactamase (ESBL)-producing Escherichia coli has become an important challenge among pediatric patients with community-acquired urinary tract infection (UTI). The aim of this study was to assess the antimicrobial susceptibility patterns, associated risk factors and to survey the frequency of bla cefotaximase (CTX-M), bla temoneira (TEM), and bla sulfhydryl variable (SHV) genotypes in ESBL-producing E. coli isolated from children with community-acquired UTI. This was a prospective study conducted from November 2012 to March 2016 in a tertiary care center. E. coli isolated in urine cultures from children aged ≤18 years was identified and confirmed for ESBL production. ESBL-positive strains were screened for ESBL encoding genes. Chi-square test and Fisher's exact test were used to compare the difference in antibiotic susceptibility with respect to ESBL positive and negative, and binary logistic regression was used to identify the risk factors associated with ESBL production. Among 523 E. coli isolates, 196 (37.5%) were ESBL positive, >90% were resistant to cephalosporins, and 56% were resistant to fluoroquinolones. Least resistance was observed for imipenem, netilmicin, and nitrofurantoin (2%, 8.6%, 15.3%). Association between ESBL production and drug resistance was significant for ceftazidime ( P antibiotics were the common risk factors. ESBL-producing E. coli from community-acquired pediatric UTI carries more than one type of beta-lactamase coding genes correlating their increased antibiotic resistance. Aggressive infection control policy, routine screening for detecting ESBL isolates in clinical samples, and antimicrobial stewardship are the keys to prevent their dissemination in community settings.

  10. Manufacturing ontology through templates

    Directory of Open Access Journals (Sweden)

    Diciuc Vlad

    2017-01-01

    Full Text Available The manufacturing industry contains a high volume of knowhow and of high value, much of it being held by key persons in the company. The passing of this know-how is the basis of manufacturing ontology. Among other methods like advanced filtering and algorithm based decision making, one way of handling the manufacturing ontology is via templates. The current paper tackles this approach and highlights the advantages concluding with some recommendations.

  11. Manufacturing knowledge management strategy

    OpenAIRE

    Shaw , Duncan; Edwards , John

    2006-01-01

    Abstract The study sought to understand the components of knowledge management strategy from the perspective of staff in UK manufacturing organisations. To analyse this topic we took an empirical approach and collaborated with two manufacturing organisations. Our main finding centres on the key components of a knowledge management strategy, and the relationships between it and manufacturing strategy and corporate strategy. Other findings include: the nature of knowledge in manufact...

  12. Profiles of phenotype resistance to antibiotic other than β-lactams in Klebsiella pneumoniae ESBLs-producers, carrying blaSHV genes

    Directory of Open Access Journals (Sweden)

    Pawel Sacha

    2010-04-01

    Full Text Available Extended spectrum β-lactamases production is one of the most common mechanism of resistance to extendedspectrum β-lactam antibiotics is increasing worldwide. Twenty five strains of Klebsiella pneumoniae isolated from clinicalspecimens were tested. Based on the phenotypic confirmatory test all these strains were defined as ESBL producers namedESBL(+. The plasmid DNA from each strains was used to investigate the presence of blaSHV genes responsible for extendedspectrum β-lactamases production. Moreover, susceptibility of these strains to antibiotic other than β-lactams in was tested.

  13. Industrial & Manufacturing Engineering | Classification | College of

    Science.gov (United States)

    Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

  14. Strategic Roles of Manufacturing

    DEFF Research Database (Denmark)

    Yang, Cheng

    with the trend of globalisation, how do industrial companies develop their global manufacturing networks? These two questions are actually interlinked. On the one hand, facing increasing offshoring and outsourcing of production activities, industrial companies have to understand how to develop their global...... manufacturing networks. On the other hand, ongoing globalisation also brings tremendous impacts to post-industrial economies (e.g. Denmark). A dilemma therefore arises, i.e. whether it is still necessary to keep manufacturing in these post-industrial economies; if yes, what kinds of roles manufacturing should...

  15. Composite Structures Manufacturing Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Composite Structures Manufacturing Facility specializes in the design, analysis, fabrication and testing of advanced composite structures and materials for both...

  16. Manufacturing Demonstration Facility (MDF)

    Data.gov (United States)

    Federal Laboratory Consortium — The U.S. Department of Energy Manufacturing Demonstration Facility (MDF) at Oak Ridge National Laboratory (ORNL) provides a collaborative, shared infrastructure to...

  17. Advanced Manufacturing Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Advanced Manufacturing Laboratory at the University of Maryland provides the state of the art facilities for realizing next generation products and educating the...

  18. Improving Project Manufacturing Coordination

    Directory of Open Access Journals (Sweden)

    Korpivaara Ville

    2014-09-01

    Full Text Available The objective of this research is to develop firms’ project manufacturing coordination. The development will be made by centralizing the manufacturing information flows in one system. To be able to centralize information, a deep user need assessment is required. After user needs have been identified, the existing system will be developed to match these needs. The theoretical background is achieved through exploring the literature of project manufacturing, development project success factors and different frameworks and tools for development project execution. The focus of this research is rather in customer need assessment than in system’s technical expertise. To ensure the deep understanding of customer needs this study is executed by action research method. As a result of this research the information system for project manufacturing coordination was developed to respond revealed needs of the stakeholders. The new system improves the quality of the manufacturing information, eliminates waste in manufacturing coordination processes and offers a better visibility to the project manufacturing. Hence it provides a solid base for the further development of project manufacturing.

  19. Modern manufacturing engineering

    CERN Document Server

    2015-01-01

    This book covers recent research and trends in Manufacturing Engineering. The chapters emphasize different aspects of the transformation from materials to products. It provides the reader with fundamental materials treatments and the integration of processes. Concepts such as green and lean manufacturing are also covered in this book.

  20. Optimized manufacturable porous materials

    DEFF Research Database (Denmark)

    Andreassen, Erik; Andreasen, Casper Schousboe; Jensen, Jakob Søndergaard

    Topology optimization has been used to design two-dimensional material structures with specific elastic properties, but optimized designs of three-dimensional material structures are more scarsely seen. Partly because it requires more computational power, and partly because it is a major challenge...... to include manufacturing constraints in the optimization. This work focuses on incorporating the manufacturability into the optimization procedure, allowing the resulting material structure to be manufactured directly using rapid manufacturing techniques, such as selective laser melting/sintering (SLM....../S). The available manufacturing methods are best suited for porous materials (one constituent and void), but the optimization procedure can easily include more constituents. The elasticity tensor is found from one unit cell using the homogenization method together with a standard finite element (FE) discretization...

  1. Colistin- and Carbapenem-Resistant Escherichia coli Harboring mcr-1 and blaNDM-5, Causing a Complicated Urinary Tract Infection in a Patient from the United States

    Directory of Open Access Journals (Sweden)

    José R. Mediavilla

    2016-08-01

    Full Text Available Colistin is increasingly used as an antibiotic of last resort for the treatment of carbapenem-resistant Gram-negative infections. The plasmid-borne colistin resistance gene mcr-1 was initially identified in animal and clinical samples from China and subsequently reported worldwide, including in the United States. Of particular concern is the spread of mcr-1 into carbapenem-resistant bacteria, thereby creating strains that approach pan-resistance. While several reports of mcr-1 have involved carbapenem-resistant strains, no such isolates have been described in the United States. Here, we report the isolation and identification of an Escherichia coli strain harboring both mcr-1 and carbapenemase gene blaNDM-5 from a urine sample in a patient without recent travel outside the United States. The isolate exhibited resistance to both colistin and carbapenems, but was susceptible to amikacin, aztreonam, gentamicin, nitrofurantoin, tigecycline, and trimethoprim-sulfamethoxazole. The mcr-1- and blaNDM-5-harboring plasmids were completely sequenced and shown to be highly similar to plasmids previously reported from China. The strain in this report was first isolated in August 2014, highlighting an earlier presence of mcr-1 within the United States than previously recognized.

  2. Loop-Mediated Isothermal Amplification untuk Mendeteksi Gen blaTEM sebagai Penyandi Extended-Spectrum Beta-Lactamase pada Isolat Enterobacteriaceae

    Directory of Open Access Journals (Sweden)

    Bayu A. P. Wilopo

    2015-12-01

    Full Text Available Extended-spectrum beta-lactamase (ESBL is a beta-lactamase enzyme that is capable of hydrolyzing penicillin, cephalosporin, and monobactam, and can be inhibited by clavulanic acid. This enzyme is encoded by multiple genes, one of them is blaTEM. Polymerase chain reaction (PCR is one of the DNA amplification methods that are frequently used; however, there are other methods that can be used including, among others, loop-mediated isothermal amplification (LAMP. LAMP requires simple equipment with quicker and easy-to-read results compared to PCR. This study was a diagnostic test to explore the sensitivity and specificity of LAMP method compared to PCR in detecting blaTEM gene. Furthermore, the concordance between LAMP and PCR methods was assessed. A total of 92 Enterobacteriaceae isolates were examined by PCR and LAMP methods and compared. The result showed that the LAMP method had a sensitivity of 91.4% and a specificity of 91.2% with a concordance value (kappa of 85.4%. In conclusion, LAMP method has a good validity and a very good conformity compared to the PCR method. Therefore, LAMP method can be used as an alternative diagnostic test, especially in limited settings.

  3. Resistencia a los antibióticos beta-lactámicos Carbapenems mediada por el gen blaKPC en Klebsiella pneumoniae

    Directory of Open Access Journals (Sweden)

    Aura Dayana del Carmen Falco Restrepo

    2015-12-01

    Full Text Available  Los carbapenems son antibióticos â-lactamicos de amplio espectro que se utilizan como terapia de primera línea para tratar pacientes con infecciones graves. Actualmente, la resistencia a carbapenems se asocia con la presencia de â-lactamasas capaces de hidrolizar estos antibióticos. La carbapenemasa de clase A más común es KPC, la cual es codificada por el gen blaKPC que generalmente, se encuentra ubicado en plásmidos. La selección y la rápida propagación de aislados de Klebsiella pneumoniae portadores de estas carbapenemasas se ha convertido en un problema de salud pública a nivel mundial. Esta mini-revision describe uno de los mecanismos más frecuentes de resistencia a carbapenems como lo son las enzimas carbapenemasas tipo KPC. Además se describen las variantes del gen blaKPC asi como el elemento genético móvil, el transposon Tn4401, el principal responsable de su diseminación entre géneros y especies bacterianas diferentes. Finalmente se hace una pequeña revisión cronológica de los reportes de la enzima KPC a nivel mundial.

  4. Integration of the blaNDM-1 carbapenemase gene into Proteus genomic island 1 (PGI1-PmPEL) in a Proteus mirabilis clinical isolate.

    Science.gov (United States)

    Girlich, Delphine; Dortet, Laurent; Poirel, Laurent; Nordmann, Patrice

    2015-01-01

    To decipher the mechanisms and their associated genetic determinants responsible for β-lactam resistance in a Proteus mirabilis clinical isolate. The entire genetic structure surrounding the β-lactam resistance genes was characterized by PCR, gene walking and DNA sequencing. Genes encoding the carbapenemase NDM-1 and the ESBL VEB-6 were located in a 38.5 kb MDR structure, which itself was inserted into a new variant of the Proteus genomic island 1 (PGI1). This new PGI1-PmPEL variant of 64.4 kb was chromosomally located, as an external circular form in the P. mirabilis isolate, suggesting potential mobility. This is the first known description of the bla(NDM-1) gene in a genomic island structure, which might further enhance the spread of the bla(NDM-1) carbapenemase gene among enteric pathogens. © The Author 2014. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  5. Manufacture of disposal canisters

    International Nuclear Information System (INIS)

    Nolvi, L.

    2009-12-01

    The report summarizes the development work carried out in the manufacturing of disposal canister components, and present status, in readiness for manufacturing, of the components for use in assembly of spent nuclear fuel disposal canister. The disposal canister consist of two major components: the nodular graphite cast iron insert and overpack of oxygen-free copper. The manufacturing process for copper components begins with a cylindrical cast copper billet. Three different manufacturing processes i.e. pierce and draw, extrusion and forging are being developed, which produce a seamless copper tube or a tube with an integrated bottom. The pierce and draw process, Posiva's reference method, makes an integrated bottom possible and only the lid requires welding. Inserts for BWR-element are cast with 12 square channels and inserts for VVER 440-element with 12 round channels. Inserts for EPR-elements have four square channels. Casting of BWR insert type has been studied so far. Experience of casting inserts for PWR, which is similar to the EPR-type, has been got in co-operation with SKB. The report describes the processes being developed for manufacture of disposal canister components and some results of the manufacturing experiments are presented. Quality assurance and quality control in manufacture of canister component is described. (orig.)

  6. Mechanical Prototyping and Manufacturing Internship

    Science.gov (United States)

    Grenfell, Peter

    2016-01-01

    The internship was located at the Johnson Space Center (JSC) Innovation Design Center (IDC), which is a facility where the JSC workforce can meet and conduct hands-on innovative design, fabrication, evaluation, and testing of ideas and concepts relevant to NASA's mission. The tasks of the internship included mechanical prototyping design and manufacturing projects in service of research and development as well as assisting the users of the IDC in completing their manufacturing projects. The first project was to manufacture hatch mechanisms for a team in the Systems Engineering and Project Advancement Program (SETMAP) hexacopter competition. These mechanisms were intended to improve the performance of the servomotors and offer an access point that would also seal to prevent cross-contamination. I also assisted other teams as they were constructing and modifying their hexacopters. The success of this competition demonstrated a proof of concept for aerial reconnaissance and sample return to be potentially used in future NASA missions. I also worked with Dr. Kumar Krishen to prototype an improved thermos and a novel, portable solar array. Computer-aided design (CAD) software was used to model the parts for both of these projects. Then, 3D printing as well as conventional techniques were used to produce the parts. These prototypes were then subjected to trials to determine the success of the designs. The solar array is intended to work in a cluster that is easy to set up and take down and doesn't require powered servomechanisms. It could be used terrestrially in areas not serviced by power grids. Both projects improve planetary exploration capabilities to future astronauts. Other projects included manufacturing custom rail brackets for EG-2, assisting engineers working on underwater instrument and tool cases for the NEEMO project, and helping to create mock-up parts for Space Center Houston. The use of the IDC enabled efficient completion of these projects at

  7. Complete sequencing of IncI1 sequence type 2 plasmid pJIE512b indicates mobilization of blaCMY-2 from an IncA/C plasmid.

    Science.gov (United States)

    Tagg, Kaitlin A; Iredell, Jonathan R; Partridge, Sally R

    2014-08-01

    Sequencing of pJIE512b, a 92.3-kb IncI1 sequence type 2 (ST2) plasmid carrying bla(CMY-2), revealed a bla(CMY-2) context that appeared to have been mobilized from an IncA/C plasmid by the insertion sequence IS1294. A comparison with published plasmids suggests that bla(CMY-2) has been mobilized from IncA/C to IncI1 plasmids more than once by IS1294-like elements. Alignment of pJIE512b with the only other available IncI1 ST2 plasmid revealed differences across the backbones, indicating variability within this sequence type. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

  8. High energy beam manufacturing technologies

    International Nuclear Information System (INIS)

    Geskin, E.S.; Leu, M.C.

    1989-01-01

    Technological progress continues to enable us to utilize ever widening ranges of physical and chemical conditions for material processing. The increasing cost of energy, raw materials and environmental control make implementation of advanced technologies inevitable. One of the principal avenues in the development of material processing is the increase of the intensity, accuracy, flexibility and stability of energy flow to the processing site. The use of different forms of energy beams is an effective way to meet these sometimes incompatible requirements. The first important technological applications of high energy beams were welding and flame cutting. Subsequently a number of different kinds of beams have been used to solve different problems of part geometry control and improvement of surface characteristics. Properties and applications of different specific beams were subjects of a number of fundamental studies. It is important now to develop a generic theory of beam based manufacturing. The creation of a theory dealing with general principles of beam generation and beam-material interaction will enhance manufacturing science as well as practice. For example, such a theory will provide a format approach for selection and integration of different kinds of beams for a particular application. And obviously, this theory will enable us to integrate the knowledge bases of different manufacturing technologies. The War of the Worlds by H. G. Wells, as well as a number of more technical, although less exciting, publications demonstrate both the feasibility and effectiveness of the generic approach to the description of beam oriented technology. Without any attempt to compete with Wells, we still hope that this volume will contribute to the creation of the theory of beam oriented manufacturing

  9. Multihospital Occurrence of Pan-Resistant Klebsiella pneumoniae Sequence Type 147 with an ISEcp1-Directed blaOXA-181 Insertion in the mgrB Gene in the United Arab Emirates.

    Science.gov (United States)

    Sonnevend, Ágnes; Ghazawi, Akela; Hashmey, Rayhan; Haidermota, Aliasgher; Girgis, Safinaz; Alfaresi, Mubarak; Omar, Mohammed; Paterson, David L; Zowawi, Hosam M; Pál, Tibor

    2017-07-01

    The emergence of pan-resistant Klebsiella pneumoniae strains is an increasing concern. In the present study, we describe a cluster of 9 pan-resistant K. pneumoniae sequence type 147 (ST147) isolates encountered in 4 patients over nearly 1 year in 3 hospitals of the United Arab Emirates (UAE). The isolates exhibited highly similar genotypes. All produced chromosomally encoded OXA-181, and the majority also produced the NDM-5 carbapenemase. As with the previously described single isolate from the UAE, MS6671, the mgrB was disrupted by a functional, IS Ecp1 -driven bla OXA-181 insertion causing resistance to carbapenems. The mutation was successfully complemented with an intact mgrB gene, indicating that it was responsible for colistin resistance. bla NDM-5 was located within a resistance island of an approximately 100-kb IncFII plasmid carrying ermB , mph (A), bla TEM-1B , rmtB , bla NDM-5 , sul1 , aadA2 , and dfrA12 resistance genes. Sequencing this plasmid (pABC143-NDM) revealed that its backbone was nearly identical to that of plasmid pMS6671E from which several resistance genes, including bla NDM-5 , had been deleted. More extensive similarities of the backbone and the resistance island were found between pABC143C-NDM and the bla NDM-5 -carrying IncFII plasmids of two K. pneumoniae ST147 isolates from South Korea, one of which was colistin resistant, and both also produced OXA-181. Notably, one of these strains was isolated from a patient transferred from the UAE. Our data show that this pan-resistant clone has an alarming capacity to maintain itself over an extended period of time and is even likely to be transmitted internationally. Copyright © 2017 American Society for Microbiology.

  10. Serratia marcescens harbouring SME-type class A carbapenemases in Canada and the presence of blaSME on a novel genomic island, SmarGI1-1.

    Science.gov (United States)

    Mataseje, L F; Boyd, D A; Delport, J; Hoang, L; Imperial, M; Lefebvre, B; Kuhn, M; Van Caeseele, P; Willey, B M; Mulvey, M R

    2014-07-01

    An increasing prevalence since 2010 of Serratia marcescens harbouring the Ambler class A carbapenemase SME prompted us to further characterize these isolates. Isolates harbouring bla(SME) were identified by PCR and sequencing. Phenotypic analysis for carbapenemase activity was carried out by a modified Hodge test and a modified Carba NP test. Antimicrobial susceptibilities were determined by Etest and Vitek 2. Typing was by PFGE of macrorestriction digests. Whole-genome sequencing of three isolates was carried out to characterize the genomic region harbouring the bla(SME)-type genes. All S. marcescens harbouring SME-type enzymes could be detected using a modified Carba NP test. Isolates harbouring bla(SME) were resistant to penicillins and carbapenems, but remained susceptible to third-generation cephalosporins, as well as fluoroquinolones and trimethoprim/sulfamethoxazole. Isolates exhibited diverse genetic backgrounds, though 57% of isolates were found in three clusters. Analysis of whole-genome sequence data from three isolates revealed that the bla(SME) gene occurred in a novel cryptic prophage genomic island, SmarGI1-1. There has been an increasing occurrence of S. marcescens harbouring bla(SME) in Canada since 2010. The bla(SME) gene was found on a genomic island, SmarGI1-1, that can be excised and circularized, which probably contributes to its dissemination amongst S. marcescens. © The Author 2014. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  11. Manufacturing tolerant topology optimization

    DEFF Research Database (Denmark)

    Sigmund, Ole

    2009-01-01

    In this paper we present an extension of the topology optimization method to include uncertainties during the fabrication of macro, micro and nano structures. More specifically, we consider devices that are manufactured using processes which may result in (uniformly) too thin (eroded) or too thick...... (dilated) structures compared to the intended topology. Examples are MEMS devices manufactured using etching processes, nano-devices manufactured using e-beam lithography or laser micro-machining and macro structures manufactured using milling processes. In the suggested robust topology optimization...... approach, under- and over-etching is modelled by image processing-based "erode" and "dilate" operators and the optimization problem is formulated as a worst case design problem. Applications of the method to the design of macro structures for minimum compliance and micro compliant mechanisms show...

  12. Manufacturing parabolic mirrors

    CERN Multimedia

    CERN PhotoLab

    1975-01-01

    The photo shows the construction of a vertical centrifuge mounted on an air cushion, with a precision of 1/10000 during rotation, used for the manufacture of very high=precision parabolic mirrors. (See Annual Report 1974.)

  13. MEDICAL MANUFACTURING INNOVATIONS

    Directory of Open Access Journals (Sweden)

    Cosma Sorin Cosmin

    2015-02-01

    Full Text Available The purpose of these studies was to improve the design and manufacturing process by selective laser melting, of new medical implants. After manufacturing process, the implants were measured, microscopically and mechanical analyzed. Implants manufactured by AM can be an attractive option for surface coatings to improve the osseointegration process. The main advantages of customized implants made by AM process are: the precise adaptation to the region of implantation, better cosmesis, reduced surgical times and better performance over their generic counterparts. These medical manufacturing changes the way that the surgeons are planning surgeries and engineers are designing custom implant. AM process has eliminated the constraints of shape, size, internal structure and mechanical properties making it possible for fabrication of implants that conform to the physical and mechanical requirements of implantation according to CT images. This article will review some custom implants fabricated in DME using biocompatible titanium.

  14. Manufacturing Enterprise in Asia

    International Development Research Centre (IDRC) Digital Library (Canada)

    2017-12-13

    Dec 13, 2017 ... 53 Designing Financial Systems in East Asia and Japan ..... 5.3 Weights for the industrial production index (%) ..... The demand for manufactured goods for this low level of consumption per capita also tends to be very low.

  15. Additive manufactured serialization

    Science.gov (United States)

    Bobbitt, III, John T.

    2017-04-18

    Methods for forming an identifying mark in a structure are described. The method is used in conjunction with an additive manufacturing method and includes the alteration of a process parameter during the manufacturing process. The method can form in a unique identifying mark within or on the surface of a structure that is virtually impossible to be replicated. Methods can provide a high level of confidence that the identifying mark will remain unaltered on the formed structure.

  16. Colistin- and Carbapenem-Resistant Escherichia coli Harboring mcr-1 and blaNDM-5, Causing a Complicated Urinary Tract Infection in a Patient from the United States.

    Science.gov (United States)

    Mediavilla, José R; Patrawalla, Amee; Chen, Liang; Chavda, Kalyan D; Mathema, Barun; Vinnard, Christopher; Dever, Lisa L; Kreiswirth, Barry N

    2016-08-30

    Colistin is increasingly used as an antibiotic of last resort for the treatment of carbapenem-resistant Gram-negative infections. The plasmid-borne colistin resistance gene mcr-1 was initially identified in animal and clinical samples from China and subsequently reported worldwide, including in the United States. Of particular concern is the spread of mcr-1 into carbapenem-resistant bacteria, thereby creating strains that approach pan-resistance. While several reports of mcr-1 have involved carbapenem-resistant strains, no such isolates have been described in the United States. Here, we report the isolation and identification of an Escherichia coli strain harboring both mcr-1 and carbapenemase gene blaNDM-5 from a urine sample in a patient without recent travel outside the United States. The isolate exhibited resistance to both colistin and carbapenems, but was susceptible to amikacin, aztreonam, gentamicin, nitrofurantoin, tigecycline, and trimethoprim-sulfamethoxazole. The mcr-1- and blaNDM-5-harboring plasmids were completely sequenced and shown to be highly similar to plasmids previously reported from China. The strain in this report was first isolated in August 2014, highlighting an earlier presence of mcr-1 within the United States than previously recognized. Colistin has become the last line of defense for the treatment of infections caused by Gram-negative bacteria resistant to multiple classes of antibiotics, in particular carbapenem-resistant Enterobacteriaceae (CRE). Resistance to colistin, encoded by the plasmid-borne gene mcr-1, was first identified in animal and clinical samples from China in November 2015 and has subsequently been reported from numerous other countries. In April 2016, mcr-1 was identified in a carbapenem-susceptible Escherichia coli strain from a clinical sample in the United States, followed by a second report from a carbapenem-susceptible E. coli strain originally isolated in May 2015. We report the isolation and identification of

  17. Value networks in manufacturing sustainability and performance excellence

    CERN Document Server

    Uusitalo, Teuvo

    2017-01-01

    This book highlights innovative solutions together with various techniques and methods that can help support the manufacturing sector to excel in economic, social, and environmental terms in networked business environments. The book also furthers understanding of sustainable manufacturing from the perspective of value creation in manufacturing networks, by capitalizing on the outcomes of the European ‘Sustainable Value Creation in Manufacturing Networks’ project. New dynamics and uncertainties in modern markets call for innovative solutions in the global manufacturing sector. While the manufacturing sector is traditionally driven by technology, it also requires other managerial and organizational solutions in terms of network governance, business models, sustainable solution development for products and services, performance management portals, etc., which can provide major competitive advantages for companies. At the same time, the manufacturing industry is subject to a change process, where business net...

  18. Energetics Manufacturing Technology Center (EMTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Energetics Manufacturing Technology Center (EMTC), established in 1994 by the Office of Naval Research (ONR) Manufacturing Technology (ManTech) Program, is Navy...

  19. Presence of quinolone resistance to qnrB1 genes and blaOXA-48 carbapenemase in clinical isolates of Klebsiella pneumoniae in Spain.

    Science.gov (United States)

    Rodríguez Martínez, J M; Díaz-de Alba, P; Lopez-Cerero; Ruiz-Carrascoso, G; Gomez-Gil, R; Pascual, A

    2014-01-01

    A study is presented on the presence of quinolone resistance qnrB1 genes in clinical isolates belonging to the largest series of infections caused by OXA-48-producing Klebsiella pneumoniae in a single-centre outbreak in Spain. Evidence is also provided, according to in vitro results, that there is a possibility of co-transfer of plasmid harbouring blaOXA-48 with an other plasmid harbouring qnrB1 in presence of low antibiotic concentrations of fluoroquinolones, showing the risk of multi-resistance screening. Copyright © 2013 Elsevier España, S.L.U. y Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

  20. Spatial molecular epidemiology of carbapenem-resistant and New Delhi metallo beta-lactamase (blaNDM)-producing Escherichia coli in the piglets of organized farms in India.

    Science.gov (United States)

    Pruthvishree, B S; Vinodh Kumar, O R; Sinha, D K; Malik, Y P S; Dubal, Z B; Desingu, P A; Shivakumar, M; Krishnaswamy, N; Singh, B R

    2017-06-01

    A cross-sectional study was conducted in 10 government-organized pig farms between 2014 and 2016 representing seven states of India to understand the epidemiology of carbapenem resistance in the Escherichia coli. In this study, fecal sample (n = 673) from non-diarrheic (n = 501) and diarrheic (n = 172) piglets were processed for isolation of carbapenem resistant E. coli. Of 673, E. coli isolate (n = 112) was genotyped for confirming the carbapenem resistance and associated virulence factors. Of the 112 isolates, 23 were phenotypically resistant to carbapenem and 8 were carrying the New Delhi metallo beta-lactamase (blaNDM) gene. The carbapenem-resistant isolates also produced extended spectrum beta-lactamases and were multidrug resistant. The PCR-based pathotyping revealed the presence of stx1, stx2, eae and hlyA genes. The enterobacterial repetitive intergenic consensus PCR dendrogram analysis of the isolates yielded three distinct clusters. The statistical analysis revealed no association between carriages of carbapenem-resistant E. coli in different breed of piglets however, location, sex, health status of piglets and age showed significant difference. The spatial analysis with SaTScan helped in identification of carbapenem-resistant clusters. The presence of carbapenem resistant E. coli isolates with virulence genes in the piglet poses a potential public health risk through possible access and spread via the food chain and environment. Efflux pump may also play an important role in carbapenem resistance in piglet E. coli isolates. Furthermore, identification of risk factors in relation to spatial clusters will help in designing preventive strategies for reducing the risk of spread of carbapenem resistant bacteria. 1. Piglets harbor carbapenem resistant E. coli and have great public health significance. 2. Apart from carbapenemase, efflux pump is also important for carbapenem resistance. 3. This is the first report of blaNDM in the piglets from India. © 2017

  1. Implementation of hierarchical design for manufacture rules in manufacturing processes

    OpenAIRE

    Parvez, Masud

    2008-01-01

    In order to shorten the product development cycle time, minimise overall cost and smooth transition into production, early consideration of manufacturing processes is important. Design for Manufacture (DFM) is the practice of designing products with manufacturing issues using an intelligent system, which translates 3D solid models into manufacturable features. Many existing and potential applications, particularly in the field of manufacturing, require various aspects of features technology. ...

  2. Complete Sequence of pSAM7, an IncX4 Plasmid Carrying a Novel blaCTX-M-14b Transposition Unit Isolated from Escherichia coli and Enterobacter cloacae from Cattle

    NARCIS (Netherlands)

    Stokes, M.O.; Abuoun, M.; Umur, S.; Wu, G.; Partridge, S.R.; Mevius, D.J.; Coldham, N.G.; Fielder, M.D.

    2013-01-01

    The same plasmid carrying blaCTX-M-14b was identified from an Escherichia coli isolate and an Enterobacter cloacae isolate collected from cattle in the United Kingdom by complete plasmid sequencing. This 35,341-bp plasmid, pSAM7, had an IncX4 backbone that is 99% identical to that of pJIE143 from a

  3. Robust Manufacturing Control

    CERN Document Server

    2013-01-01

    This contributed volume collects research papers, presented at the CIRP Sponsored Conference Robust Manufacturing Control: Innovative and Interdisciplinary Approaches for Global Networks (RoMaC 2012, Jacobs University, Bremen, Germany, June 18th-20th 2012). These research papers present the latest developments and new ideas focusing on robust manufacturing control for global networks. Today, Global Production Networks (i.e. the nexus of interconnected material and information flows through which products and services are manufactured, assembled and distributed) are confronted with and expected to adapt to: sudden and unpredictable large-scale changes of important parameters which are occurring more and more frequently, event propagation in networks with high degree of interconnectivity which leads to unforeseen fluctuations, and non-equilibrium states which increasingly characterize daily business. These multi-scale changes deeply influence logistic target achievement and call for robust planning and control ...

  4. Flexibility in fuel manufacturing

    International Nuclear Information System (INIS)

    Reparaz, A.; Stavig, W.E.; McLees, R.B.

    1987-01-01

    From its inception Exxon Nuclear has produced both BWR and PWR fuels. This is reflected in a product line that, to date, includes over 20 fuel designs. These range from 6x6 design at one end of the spectrum to the recently introduced 17x17 design. The benefits offered include close tailoring of the fuel design to match the customer's requirements, and the ability to rapidly introduce product changes, such as the axial blanket design, with a minimal impact on manufacturing. This flexibility places a number of demands on the manufacturing organization. Close interfaces must be established, and maintained, between the marketing, product design, manufacturing, purchasing and quality organizations, and the information flows must be immediate and accurate. Production schedules must be well planned and must be maintained or revised to reflect changing circumstances. Finally, the manufacturing facilities must be designed to allow rapid switchover between product designs with minor tooling changes and/or rerouting of product flows to alternate work stations. Among the tools used to manage the flow of information and to maintain the tight integration necessary between the various manufacturing, engineering and quality organizations is a commercially available, computerized planning and tracking system, AMAPS. A real-time production data collection system has been designed which gathers data from each production work station for use by the shop floor control module of AMAPS. Accuracy of input to the system is improved through extensive use of bar codes to gather information on the product as it moves through and between work stations. This computerized preparation of material tracing has an impact on direct manufacturing records, quality control records, nuclear material records and accounting and inventory records. This is of benefit to both Exxon Nuclear and its customers

  5. Diccionario Lean Manufacturing

    OpenAIRE

    Muñoz Ellner, Sarah María

    2016-01-01

    El Diccionario Bilingüe de Lean Manufacturing pretende ser un instrumento de apoyo a todo aquel que tenga la responsabilidad de planear, ejecutar o simplemente algún interés con las actividades de Lean Manufacturing, aportando así también conceptos claros tanto en castellano como en inglés, con el fin de entender de forma integral el alcance mismo que puede llegar a tener dicha filosofía, al igual que se proporcionara una serie de siglas y herramientas para la implementación del Lean Manufact...

  6. Developments in fuel manufacturing

    International Nuclear Information System (INIS)

    Williams, T.

    1997-01-01

    BNFL has a long tradition of willingness to embrace technological challenge and a dedication to quality. This paper describes advances in the overall manufacturing philosophy at BNFL's Fuel Business Group and then covers how some new technologies are currently being employed in BNFL Fuel Business Group's flagship oxide complex (OFC), which is currently in its final stages of commissioning. This plant represents a total investment of some Pound 200 million. This paper also describes how these technologies are also being deployed in BNFL's MOX plant now being built at Sellafield and, finally, covers some new processes being developed for advanced fuel manufacture. (author)

  7. A Taxonomy of Manufacturing Strategies

    OpenAIRE

    Jeffrey G. Miller; Aleda V. Roth

    1994-01-01

    This paper describes the development and analysis of a numerical taxonomy of manufacturing strategies. The taxonomy was developed with standard methods of cluster analysis, and is based on the relative importance attached to eleven competitive capabilities defining the manufacturing task of 164 large American manufacturing business units. Three distinct clusters of manufacturing strategy groups were observed. Though there is an industry effect, all three manufacturing strategy types are obser...

  8. Expansion of highly stable bla OXA-10 β-lactamase family within diverse host range among nosocomial isolates of Gram-negative bacilli within a tertiary referral hospital of Northeast India.

    Science.gov (United States)

    Maurya, Anand Prakash; Dhar, Debadatta; Basumatary, Mridul Kumar; Paul, Deepjyoti; Ingti, Birson; Choudhury, Debarati; Talukdar, Anupam Das; Chakravarty, Atanu; Mishra, Shweta; Bhattacharjee, Amitabha

    2017-04-04

    The current study reports dissemination of highly stable bla OXA-10 family of beta lactamases among diverse group of nosocomial isolates of Gram-negative bacilli within a tertiary referral hospital of the northern part of India. In the current study, a total number of 590 Gram negative isolates were selected for a period of 1 year (i.e. 1st November 2011-31st October 2012). Members of Enterobacteriaceae and non fermenting Gram negative rods were obtained from Silchar Medical College and Hospital, Silchar, India. Screening and molecular characterization of β-lactamase genes was done. Integrase gene PCR was performed for detection and characterization of integrons and cassette PCR was performed for study of the variable regions of integron gene cassettes carrying bla OXA-10 . Gene transferability, stability and replicon typing was also carried out. Isolates were typed by ERIC as well as REP PCR. Twenty-four isolates of Gram-negative bacilli that were harboring bla OXA-10 family (OXA-14, and OXA16) with fact that resistance was to the extended cephalosporins. The resistance determinant was located within class I integron in five diverse genetic contexts and horizontally transferable in Enterobacteriaceae, was carried through IncY type plasmid. MIC values were above break point for all the tested cephalosporins. Furthermore, co-carriage of bla CMY-2 was also observed. Multiple genetic environment of bla OXA-10 in this geographical region must be investigated to prevent dissemination of these gene cassettes within bacterial population within hospital settings.

  9. Transfer of manufacturing units

    DEFF Research Database (Denmark)

    Madsen, Erik Skov; Riis, Jens Ove; Sørensen, Brian Vejrum

    2008-01-01

    The ongoing and unfolding relocation of activities is one of the major trends, that calls for attention in the domain of operations management. In particular, prescriptive models outlining: stages of the process, where to locate, and how to establish the new facilities have been studied, while...... and dilemmas to be addressed when transferring manufacturing units....

  10. Virtual manufacturing in reality

    Science.gov (United States)

    Papstel, Jyri; Saks, Alo

    2000-10-01

    SMEs play an important role in manufacturing industry. But from time to time there is a shortage in resources to complete the particular order in time. Number of systems is introduced to produce digital information in order to support product and process development activities. Main problem is lack of opportunity for direct data transition within design system modules when needed temporary extension of design capacity (virtuality) or to implement integrated concurrent product development principles. The planning experience in the field is weakly used as well. The concept of virtual manufacturing is a supporting idea to solve this problem. At the same time a number of practical problems should be solved like information conformity, data transfer, unified technological concepts acceptation etc. In the present paper the proposed ways to solve the practical problems of virtual manufacturing are described. General objective is to introduce the knowledge-based CAPP system as missing module for Virtual Manufacturing in the selected product domain. Surface-centered planning concept based on STEP- based modeling principles, and knowledge-based process planning methodology will be used to gain the objectives. As a result the planning module supplied by design data with direct access, and supporting advising environment is expected. Mould producing SME would be as test basis.

  11. Tolerances in micro manufacturing

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; Zhang, Yang; Islam, Aminul

    This paper describes a method for analysis of tolerances in micro manufacturing. It proposes a mapping oftolerances to dimensions and compares this with current available international standards. The analysisdocuments that tolerances are not scaled down as the absolute dimension. In practice...

  12. Cladding tube manufacturing technology

    International Nuclear Information System (INIS)

    Hahn, R.; Jeong, Y. H.; Baek, B. J.; Kim, K. H.; Kim, S. J.; Choi, B. K.; Kim, J. M.

    1999-04-01

    This report gives an overview of the manufacturing routine of PWR cladding tubes. The routine essentially consists of a series of deformation and annealing processes which are necessary to transform the ingot geometry to tube dimensions. By changing shape, microstructure and structure-related properties are altered simultaneously. First, a short overview of the basics of that part of deformation geometry is given which is related to tube reducing operations. Then those processes of the manufacturing routine which change the microstructure are depicted, and the influence of certain process parameters on microstructure and material properties are shown. The influence of the resulting microstructure on material properties is not discussed in detail, since it is described in my previous report A lloy Development for High Burnup Cladding . Because of their paramount importance still up to now, and because manufacturing data and their influence on properties for other alloys are not so well established or published, the descriptions are mostly related to Zry4 tube manufacturing, and are only in short for other alloys. (author). 9 refs., 46 figs

  13. Nuclear fuel manufacture

    International Nuclear Information System (INIS)

    Costello, J.M.

    1980-09-01

    The technologies used to manufacture nuclear fuel from uranium ore are outlined, with particular reference to the light water reactor fuel cycle. Capital and operating cost estimates for the processing stages are given, and the relevance to a developing uranium industry in Australia is discussed

  14. Manufacturing and Merchandising Careers

    Science.gov (United States)

    Ryan, Peter J.; And Others

    1977-01-01

    Anyone with a flair for business, product development, or promotion might consider a manufacturing or merchandising occupation. The music industry offers many career opportunities for administrators, salespersons, marketing specialists--the record industry offers positions from promotion manager to rack jobber. Describes instrument company…

  15. Manufacturing in Denmark

    DEFF Research Database (Denmark)

    Hansen, Johannes; Boer, Henrike Engele Elisabeth; Boer, Harry

    This report compares the manufacturing strategies, practices, performances and improvement activities of 39 companies that are representative for the Danish assembly industry with those of 804 companies from 19 other countries. The data supporting this report were collected in 2013 and concern...

  16. Competitive Manufacturing Dynamics

    DEFF Research Database (Denmark)

    Rymaszewska, Anna; Christensen, Irene; Karlsson, Christer

    to constantly improve this process in terms of time to volume, according to predefined cost and quality measures. The importance of the success of this process can lead to a significant creation of competitive advantage. This paper addresses the challenges of the manufacturing ramp-up process in the context...

  17. Cladding tube manufacturing technology

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, R. [Kraftwerk Union AG, Mulheim (Germany); Jeong, Y.H.; Baek, B.J.; Kim, K.H.; Kim, S.J.; Choi, B.K.; Kim, J.M. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1999-04-01

    This report gives an overview of the manufacturing routine of PWR cladding tubes. The routine essentially consists of a series of deformation and annealing processes which are necessary to transform the ingot geometry to tube dimensions. By changing shape, microstructure and structure-related properties are altered simultaneously. First, a short overview of the basics of that part of deformation geometry is given which is related to tube reducing operations. Then those processes of the manufacturing routine which change the microstructure are depicted, and the influence of certain process parameters on microstructure and material properties are shown. The influence of the resulting microstructure on material properties is not discussed in detail, since it is described in my previous report 'Alloy Development for High Burnup Cladding.' Because of their paramount importance still up to now, and because manufacturing data and their influence on properties for other alloys are not so well established or published, the descriptions are mostly related to Zry4 tube manufacturing, and are only in short for other alloys. (author). 9 refs., 46 figs.

  18. Turbine airfoil manufacturing technology

    Energy Technology Data Exchange (ETDEWEB)

    Kortovich, C. [PCC Airfoils, Inc., Beachwood, OH (United States)

    1995-12-31

    The specific goal of this program is to define manufacturing methods that will allow single crystal technology to be applied to complex-cored airfoils components for power generation applications. Tasks addressed include: alloy melt practice to reduce the sulfur content; improvement of casting process; core materials design; and grain orientation control.

  19. Drug development and manufacturing

    Science.gov (United States)

    Warner, Benjamin P.; McCleskey, T. Mark; Burrell, Anthony K.

    2015-10-13

    X-ray fluorescence (XRF) spectrometry has been used for detecting binding events and measuring binding selectivities between chemicals and receptors. XRF may also be used for estimating the therapeutic index of a chemical, for estimating the binding selectivity of a chemical versus chemical analogs, for measuring post-translational modifications of proteins, and for drug manufacturing.

  20. Micro-manufacturing: design and manufacturing of micro-products

    National Research Council Canada - National Science Library

    Koç, Muammer; Özel, Tuğrul

    2011-01-01

    .... After addressing the fundamentals and non-metallic-based micro-manufacturing processes in the semiconductor industry, it goes on to address specific metallic-based micro-manufacturing processes...

  1. Reconfigurable manufacturing system for agile mass customization manufacturing

    CSIR Research Space (South Africa)

    Xing, B

    2006-07-01

    Full Text Available Manufacturing companies are facing three challenges: low cost production of product, high quality standard and rapid responsiveness to customer requirements. These three goals are equally important for the manufacturing companies who want...

  2. Design and application of reconfigurable manufacturing systems in agile mass customization manufacturing environment.

    CSIR Research Space (South Africa)

    Xing, B

    2007-05-01

    Full Text Available processes. Many manufacturing techniques are based on the principles of Flexible Manufacturing and Dedicated Manufacturing for mass production. Reconfigurable Manufacturing System, (RMS), is a manufacturing system that can provide for Agile Manufacturing...

  3. Whole-genome typing and characterization of blaVIM19-harbouring ST383 Klebsiella pneumoniae by PFGE, whole-genome mapping and WGS.

    Science.gov (United States)

    Sabirova, Julia S; Xavier, Basil Britto; Coppens, Jasmine; Zarkotou, Olympia; Lammens, Christine; Janssens, Lore; Burggrave, Ronald; Wagner, Trevor; Goossens, Herman; Malhotra-Kumar, Surbhi

    2016-06-01

    We utilized whole-genome mapping (WGM) and WGS to characterize 12 clinical carbapenem-resistant Klebsiella pneumoniae strains (TGH1-TGH12). All strains were screened for carbapenemase genes by PCR, and typed by MLST, PFGE (XbaI) and WGM (AflII) (OpGen, USA). WGS (Illumina) was performed on TGH8 and TGH10. Reads were de novo assembled and annotated [SPAdes, Rapid Annotation Subsystem Technology (RAST)]. Contigs were aligned directly, and after in silico AflII restriction, with corresponding WGMs (MapSolver, OpGen; BioNumerics, Applied Maths). All 12 strains were ST383. Of the 12 strains, 11 were carbapenem resistant, 7 harboured blaKPC-2 and 11 harboured blaVIM-19. Varying the parameters for assigning WGM clusters showed that these were comparable to STs and to the eight PFGE types or subtypes (difference of three or more bands). A 95% similarity coefficient assigned all 12 WGMs to a single cluster, whereas a 99% similarity coefficient (or ≥10 unmatched-fragment difference) assigned the 12 WGMs to eight (sub)clusters. Based on a difference of three or more bands between PFGE profiles, the Simpson's diversity indices (SDIs) of WGM (0.94, Jackknife pseudo-values CI: 0.883-0.996) and PFGE (0.93, Jackknife pseudo-values CI: 0.828-1.000) were similar (P = 0.649). However, the discriminatory power of WGM was significantly higher (SDI: 0.94, Jackknife pseudo-values CI: 0.883-0.996) than that of PFGE profiles typed on a difference of seven or more bands (SDI: 0.53, Jackknife pseudo-values CI: 0.212-0.849) (P = 0.007). This study demonstrates the application of WGM to understanding the epidemiology of hospital-associated K. pneumoniae. Utilizing a combination of WGM and WGS, we also present here the first longitudinal genomic characterization of the highly dynamic carbapenem-resistant ST383 K. pneumoniae clone that is rapidly gaining importance in Europe. © The Author 2016. Published by Oxford University Press on behalf of the British Society for Antimicrobial

  4. Robot skills for manufacturing

    DEFF Research Database (Denmark)

    Pedersen, Mikkel Rath; Nalpantidis, Lazaros; Andersen, Rasmus Skovgaard

    2016-01-01

    -asserting robot skills for manufacturing. We show how a relatively small set of skills are derived from current factory worker instructions, and how these can be transferred to industrial mobile manipulators. General robot skills can not only be implemented on these robots, but also be intuitively concatenated...... products are introduced by manufacturers. In order to compete on global markets, the factories of tomorrow need complete production lines, including automation technologies that can effortlessly be reconfigured or repurposed, when the need arises. In this paper we present the concept of general, self...... in running production facilities at an industrial partner. It follows from these experiments that the use of robot skills, and associated task-level programming framework, is a viable solution to introducing robots that can intuitively and on the fly be programmed to perform new tasks by factory workers....

  5. Additive manufacturing of metals

    International Nuclear Information System (INIS)

    Herzog, Dirk; Seyda, Vanessa; Wycisk, Eric; Emmelmann, Claus

    2016-01-01

    Additive Manufacturing (AM), the layer-by layer build-up of parts, has lately become an option for serial production. Today, several metallic materials including the important engineering materials steel, aluminium and titanium may be processed to full dense parts with outstanding properties. In this context, the present overview article describes the complex relationship between AM processes, microstructure and resulting properties for metals. It explains the fundamentals of Laser Beam Melting, Electron Beam Melting and Laser Metal Deposition, and introduces the commercially available materials for the different processes. Thereafter, typical microstructures for additively manufactured steel, aluminium and titanium are presented. Special attention is paid to AM specific grain structures, resulting from the complex thermal cycle and high cooling rates. The properties evolving as a consequence of the microstructure are elaborated under static and dynamic loading. According to these properties, typical applications are presented for the materials and methods for conclusion.

  6. Manufacture of heat exchangers

    International Nuclear Information System (INIS)

    Burton, J.E.; Tombs, R.W.T.

    1980-01-01

    A tube bundle for use in a heat exchanger has a series of spaced parallel tubes supported by tube plates and is manufactured by depositing welding material around the end of each tube, machining the deposited material to form an annular flange around the end of the tube and welding the flange into apertures in the tube plate. Preferably the tubes have a length which is slightly less than the distance between the outer surfaces of the tube plates and the deposited material is deposited so that it overlaps and protects the end surfaces of the tubes. A plug may be inserted in the bore of the tubes during the welding material deposition which, as described, is effected by manual metal arc welding. One use of heat exchangers incorporating a tube bundle manufactured as above is in apparatus for reducing the volume of, and recovering nitric acid from, radioactive effluents from a nuclear reprocessing plant. (author)

  7. The manufacturers' viewpoint

    International Nuclear Information System (INIS)

    Davis, D.A.

    1986-01-01

    This paper describes the approach by six separate manufacturers to the problem of availability from their particular view point. This presentation demonstrates basic strategy: attention to high reliability at the design phase, based on positive and detailed feedback from existing plant; quality assurance at the production stage which has been planned into the production process in the form of a Q.A. manual in design; sophisticated test procedures and facilities; simplicity of design with high accuracy in production; provision of a clear operational maintenance manual, etc. The manufacturers agreed on the need to make a conscious commitment to design for high availability, taking into account both initial and ongoing operating costs in life cycle cost assessment. Predictability, reliability, maintainability, efficiency, market acceptability and maintenance support based on high quality feedback between operator and supplier were all stressed on the grounds that prevention is always better than cure

  8. Northwest Manufacturing Initiative

    Science.gov (United States)

    2014-07-31

    biodegradable wipes, and bags. The gStyle clothing line consists of various types of stylish clothes for babies. All gDiapers are plastic free...offers recycling services for industrial plastics and non-serviceable containers. Industrial plastics include pails, buckets, pallets, plastic film, and...manufacturer, now recycle used soda bottles, unusable second quality fabrics and worn out garments into polyester fibers to produce many of their clothes

  9. Rapid manufacturing for microfluidics

    CSIR Research Space (South Africa)

    Land, K

    2012-10-01

    Full Text Available for microfluidics K. LAND, S. HUGO, M MBANJWA, L FOURIE CSIR Materials Science and Manufacturing P O Box 395, Pretoria 0001, SOUTH AFRICA Email: kland@csir.co.za INTRODUCTION Microfluidics refers to the manipulation of very small volumes of fluid.... Microfluidics is at the forefront of developing solutions for drug discovery, diagnostics (from glucose tests to malaria and TB testing) and environmental diagnostics (E-coli monitoring of drinking water). In order to quickly implement new designs, a rapid...

  10. Northwest Manufacturing Initiative

    Science.gov (United States)

    2013-08-31

    Kadali R. Talla R. Hugo T. Russell A. Thoreson E. Porgharibshahishahrebabak Dae-wook Kim Ellen A. Fuller J. Rick Evans 5d. PROJECT NUMBER...Manufacturing (CIM) Cell .................................................................................. 8 Hurricane 130W Laser Cutter/Engraver (48” X 36...Miniature Prototype Warehouse Application using Imaging Source and RoboRealm® 3. Hurricane 130W Laser Cutter/Engraver (48” X 36”) a. Rapid

  11. Technology for Manufacturing Efficiency

    Science.gov (United States)

    1995-01-01

    The Ground Processing Scheduling System (GPSS) was developed by Ames Research Center, Kennedy Space Center and divisions of the Lockheed Company to maintain the scheduling for preparing a Space Shuttle Orbiter for a mission. Red Pepper Software Company, now part of PeopleSoft, Inc., commercialized the software as their ResponseAgent product line. The software enables users to monitor manufacturing variables, report issues and develop solutions to existing problems.

  12. Advances in Additive Manufacturing

    Science.gov (United States)

    2016-07-14

    with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS...Hamilton • Beth Bimber Air Force Research Laboratory, Metals Branch • Eddie Schwalbach • Mike Groeber • Benjamin Leever • James Hardin...conducting more in-field, or point-of-need, manufacturing than ever before. Other areas of concentration include man- machine interface, capabilities

  13. Advanced manufacturing: Technology diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Tesar, A.

    1995-12-01

    In this paper we examine how manufacturing technology diffuses rom the developers of technology across national borders to those who do not have the capability or resources to develop advanced technology on their own. None of the wide variety of technology diffusion mechanisms discussed in this paper are new, yet the opportunities to apply these mechanisms are growing. A dramatic increase in technology diffusion occurred over the last decade. The two major trends which probably drive this increase are a worldwide inclination towards ``freer`` markets and diminishing isolation. Technology is most rapidly diffusing from the US In fact, the US is supplying technology for the rest of the world. The value of the technology supplied by the US more than doubled from 1985 to 1992 (see the Introduction for details). History shows us that technology diffusion is inevitable. It is the rates at which technologies diffuse to other countries which can vary considerably. Manufacturers in these countries are increasingly able to absorb technology. Their manufacturing efficiency is expected to progress as technology becomes increasingly available and utilized.

  14. Fuel manufacturing and utilization

    International Nuclear Information System (INIS)

    2005-01-01

    The efficient utilisation of nuclear fuel requires manufacturing facilities capable of making advanced fuel types, with appropriate quality control. Once made, the use of such fuels requires a proper understanding of their behaviour in the reactor environment, so that safe operation for the design life can be achieved. The International Atomic Energy Agency supports Member States to improve in-pile fuel performance and management of materials; and to develop advanced fuel technologies for ensuring reliability and economic efficiency of the nuclear fuel cycle. It provides assistance to Member States to support fuel-manufacturing capability, including quality assurance techniques, optimization of manufacturing parameters and radiation protection. The IAEA supports the development fuel modelling expertise in Member States, covering both normal operation and postulated and severe accident conditions. It provides information and support for the operation of Nuclear Power Plant to ensure that the environment and water chemistry is appropriate for fuel operation. The IAEA supports fuel failure investigations, including equipment for failed fuel detection and for post-irradiation examination and inspection, as well as fuel repair, it provides information and support research into the basic properties of fuel materials, including UO 2 , MOX and zirconium alloys. It further offers guidance on the relationship with back-end requirement (interim storage, transport, reprocessing, disposal), fuel utilization and management, MOX fuels, alternative fuels and advanced fuel technology

  15. 21 CFR 178.3910 - Surface lubricants used in the manufacture of metallic articles.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Surface lubricants used in the manufacture of... lubricants used in the manufacture of metallic articles. The substances listed in this section may be safely used in surface lubricants employed in the manufacture of metallic articles that contact food, subject...

  16. 21 CFR 178.3010 - Adjuvant substances used in the manufacture of foamed plastics.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Adjuvant substances used in the manufacture of... substances used in the manufacture of foamed plastics. The following substances may be safely used as adjuvants in the manufacture of foamed plastics intended for use in contact with food, subject to any...

  17. Big Data Analytics for Smart Manufacturing: Case Studies in Semiconductor Manufacturing

    Directory of Open Access Journals (Sweden)

    James Moyne

    2017-07-01

    Full Text Available Smart manufacturing (SM is a term generally applied to the improvement in manufacturing operations through integration of systems, linking of physical and cyber capabilities, and taking advantage of information including leveraging the big data evolution. SM adoption has been occurring unevenly across industries, thus there is an opportunity to look to other industries to determine solution and roadmap paths for industries such as biochemistry or biology. The big data evolution affords an opportunity for managing significantly larger amounts of information and acting on it with analytics for improved diagnostics and prognostics. The analytics approaches can be defined in terms of dimensions to understand their requirements and capabilities, and to determine technology gaps. The semiconductor manufacturing industry has been taking advantage of the big data and analytics evolution by improving existing capabilities such as fault detection, and supporting new capabilities such as predictive maintenance. For most of these capabilities: (1 data quality is the most important big data factor in delivering high quality solutions; and (2 incorporating subject matter expertise in analytics is often required for realizing effective on-line manufacturing solutions. In the future, an improved big data environment incorporating smart manufacturing concepts such as digital twin will further enable analytics; however, it is anticipated that the need for incorporating subject matter expertise in solution design will remain.

  18. Transistor and integrated circuit manufacture

    International Nuclear Information System (INIS)

    Colman, D.

    1978-01-01

    This invention relates to the manufacture of transistors and integrated circuits by ion bombardment techniques and is particularly, but not exclusively, of value in the manufacture of so-called integrated injection logic circuitry. (author)

  19. 77 FR 2275 - Manufacturing Council

    Science.gov (United States)

    2012-01-17

    ... DEPARTMENT OF COMMERCE International Trade Administration Manufacturing Council AGENCY... candidate's proven experience in promoting, developing and marketing programs in support of manufacturing... participating in Council meetings and events are responsible for their travel, living and other personal...

  20. 76 FR 33244 - Manufacturing Council

    Science.gov (United States)

    2011-06-08

    ... DEPARTMENT OF COMMERCE International Trade Administration Manufacturing Council AGENCY... experience in promoting, developing and marketing programs in support of manufacturing industries, in job... Council meetings and events are responsible for their travel, living and other personal expenses. Meetings...

  1. Manufacturing mobility in global operations

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2002-01-01

    The globalization trend inevitably affects the organization of manufacturing by enterprises. It offers opportunities to examine manufacturing from a global perspective and consequently to produce where it is most appropriate. However, globalization has also led to an increase in competitive

  2. Green Manufacturing Fundamentals and Applications

    CERN Document Server

    2013-01-01

    Green Manufacturing: Fundamentals and Applications introduces the basic definitions and issues surrounding green manufacturing at the process, machine and system (including supply chain) levels. It also shows, by way of several examples from different industry sectors, the potential for substantial improvement and the paths to achieve the improvement. Additionally, this book discusses regulatory and government motivations for green manufacturing and outlines the path for making manufacturing more green as well as making production more sustainable. This book also: • Discusses new engineering approaches for manufacturing and provides a path from traditional manufacturing to green manufacturing • Addresses regulatory and economic issues surrounding green manufacturing • Details new supply chains that need to be in place before going green • Includes state-of-the-art case studies in the areas of automotive, semiconductor and medical areas as well as in the supply chain and packaging areas Green Manufactu...

  3. 75 FR 80040 - Manufacturing Council

    Science.gov (United States)

    2010-12-21

    ..., developing and marketing programs in support of manufacturing industries, job creation in the manufacturing... relevant contact information such as mailing address, fax, e-mail, fixed and mobile phone numbers and...

  4. Transistor and integrated circuit manufacture

    Energy Technology Data Exchange (ETDEWEB)

    Colman, D

    1978-09-27

    This invention relates to the manufacture of transistors and integrated circuits by ion bombardment techniques and is particularly, but not exclusively, of value in the manufacture of so-called integrated injection logic circuitry.

  5. Composites Manufacturing Education and Technology Facility Expedites Manufacturing Innovation

    Energy Technology Data Exchange (ETDEWEB)

    2017-01-01

    The Composites Manufacturing Education and Technology facility (CoMET) at the National Wind Technology Center at the National Renewable Energy Laboratory (NREL) paves the way for innovative wind turbine components and accelerated manufacturing. Available for use by industry partners and university researchers, the 10,000-square-foot facility expands NREL's composite manufacturing research capabilities by enabling researchers to design, prototype, and test composite wind turbine blades and other components -- and then manufacture them onsite. Designed to work in conjunction with NREL's design, analysis, and structural testing capabilities, the CoMET facility expedites manufacturing innovation.

  6. Exploring manufacturing solutions for SMEs

    DEFF Research Database (Denmark)

    Radziwon, Agnieszka; Blichfeldt, Henrik; Bilberg, Arne

    This exploratory study provides an overview over current state of manufacturing solutions in small and medium sized enterprises (SMEs) in region of Southern Denmark. Building on manufacturing paradigms, this paper reveals relevant aspects for the development and implementation of improving SMEs...... of manufacturing solutions, which are required to increase their competitiveness and assure sustainable growth....

  7. 78 FR 67117 - Manufacturing Council

    Science.gov (United States)

    2013-11-08

    ... preeminent destination for investment in manufacturing throughout the world'' as provided for in Section 4 of... the viewpoint of those stakeholders on current and emerging issues in the manufacturing sector. In... the U.S. manufacturing industry in terms of industry sectors, geographic locations, demographics, and...

  8. 2001 Industry Studies: Advanced Manufacturing

    Science.gov (United States)

    2001-05-28

    oriented, 19 and manufacturers are employing the Internet and associated information technologies to better integrate supply chains and form extended...ways to compete in world markets . As part of this ongoing transformation, the broad implementation of advanced manufacturing technologies , processes...competitive advantages and better performance in world markets . Importantly, advanced manufacturing involves the innovative integration of new technology

  9. Antimicrobial resistance and detection of mecA and blaZ genes in coagulase-negative Staphylococcus isolated from bovine mastitis

    Directory of Open Access Journals (Sweden)

    Lidiane C. Soares

    2012-08-01

    Full Text Available The present study evaluated the pheno- and genotypical antimicrobial resistance profile of coagulase-negative Staphylococcus (CNS species isolated from dairy cows milk, specially concerning to oxacillin. Of 100 CNS isolates, the S. xylosus was the prevalent species, followed by S. cohnii, S. hominis, S. capitis and S. haemolyticus. Only 6% were phenotypically susceptible to the antimicrobial agents tested in disk diffusion assay. Penicillin and ampicillin resistance rates were significantly higher than others antimicrobials. Four isolates were positive to mecA gene (4%, all represented by the S. xylosus species. The blaZ gene was detected in 16% of the isolates (16/100. It was noticed that all mecA + were also positive to this gene and the presence of both genes was correlated to phenotypic beta-lactamic resistance. We conclude that CNS species from bovine milk presented significantly distinct antimicrobial resistance profiles, evaluated by phenotypic and genotypic tests, which has implications for treatment and management decisions.

  10. Complete Sequence of a F33:A-:B- Conjugative Plasmid Carrying the oqxAB, fosA3 and blaCTX-M-55 Elements from a Foodborne Escherichia coli Strain

    Directory of Open Access Journals (Sweden)

    Marcus Ho-yin Wong

    2016-10-01

    Full Text Available This study reports the complete sequence of pE80, a conjugative IncFII plasmid recovered from an E. coli strain isolated from chicken meat. This plasmid harbors multiple resistance determinants including oqxAB, fosA3, blaCTX-M-55 and blaTEM-1, and is a close variant of the recently reported p42-2 element, which was recovered from E. coli of veterinary source. Recovery of pE80 constitutes evidence that evolution or genetic re-arrangement of IncFII type plasmids residing in animal-borne organisms is an active event, which involves acquisition and integration of foreign resistance elements into the plasmid backbone. Dissemination of these plasmids may further compromise the effectiveness of current antimicrobial strategies.

  11. Good manufacturing practice

    International Nuclear Information System (INIS)

    Schlyer, D.J.

    2001-01-01

    In this presentation author deals with the Implementation of good manufacturing practice for radiopharmaceuticals. The presentation is divided into next parts: Batch size; Expiration date; QC Testing; Environmental concerns; Personnel aspects; Radiation concerns; Theoretical yields; Sterilizing filters; Control and reconciliation of materials and components; Product strength; In process sampling and testing; Holding and distribution; Drug product inspection; Buildings and facilities; Renovations at BNL for GMP; Aseptic processing and sterility assurance; Process validation and control; Quality control and drug product stability; Documentation and other GMP topics; Building design considerations; Equipment; and Summary

  12. Complete Genome Sequence of a Human-Invasive Salmonella enterica Serovar Typhimurium Strain of the Emerging Sequence Type 213 Harboring a Multidrug Resistance IncA/C Plasmid and a blaCMY-2-Carrying IncF Plasmid.

    Science.gov (United States)

    Silva, Claudia; Calva, Edmundo; Calva, Juan J; Wiesner, Magdalena; Fernández-Mora, Marcos; Puente, José L; Vinuesa, Pablo

    2015-11-12

    Salmonella enterica subsp. enterica serovar Typhimurium strain 33676 was isolated in Mexico City, Mexico, from a patient with a systemic infection, and its complete genome sequence was determined using PacBio single-molecule real-time technology. Strain 33676 harbors an IncF plasmid carrying the extended-spectrum cephalosporin gene blaCMY-2 and a multidrug resistance IncA/C plasmid. Copyright © 2015 Silva et al.

  13. OPINION: Safe exponential manufacturing

    Science.gov (United States)

    Phoenix, Chris; Drexler, Eric

    2004-08-01

    In 1959, Richard Feynman pointed out that nanometre-scale machines could be built and operated, and that the precision inherent in molecular construction would make it easy to build multiple identical copies. This raised the possibility of exponential manufacturing, in which production systems could rapidly and cheaply increase their productive capacity, which in turn suggested the possibility of destructive runaway self-replication. Early proposals for artificial nanomachinery focused on small self-replicating machines, discussing their potential productivity and their potential destructiveness if abused. In the light of controversy regarding scenarios based on runaway replication (so-called 'grey goo'), a review of current thinking regarding nanotechnology-based manufacturing is in order. Nanotechnology-based fabrication can be thoroughly non-biological and inherently safe: such systems need have no ability to move about, use natural resources, or undergo incremental mutation. Moreover, self-replication is unnecessary: the development and use of highly productive systems of nanomachinery (nanofactories) need not involve the construction of autonomous self-replicating nanomachines. Accordingly, the construction of anything resembling a dangerous self-replicating nanomachine can and should be prohibited. Although advanced nanotechnologies could (with great difficulty and little incentive) be used to build such devices, other concerns present greater problems. Since weapon systems will be both easier to build and more likely to draw investment, the potential for dangerous systems is best considered in the context of military competition and arms control.

  14. INTEGRATED AUTOMOTIVE MANUFACTURING SUPPLY

    Directory of Open Access Journals (Sweden)

    P.J.S. Van Dyk

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Supply planning and traffic flow planning are major activities in the automotive manufacturing environment worldwide. Traditionally, the impact of supply planning strategies on plant traffic is rarely considered. This paper describes the development of a Decision Support System (DSS that will assist automotive manufacturers to analyse the effect of supply planning decisions on plant traffic during the supply planning phase of their logistics planning process. In essence, this DSS consists of a Supply Medium Decision Support Tool (SMDST (an interactive MS-Excel model with Visual Basic interfacing and a traffic flow simulation model tool (using eMPlant simulation software.

    AFRIKAANSE OPSOMMING: Verskaffingsbeplanning en verkeersvloeibeplanning is belangrike aktiwiteite in die motorvervaardigingsbedryf wêreldwyd. Tradisioneel word die uitwerking van verskaffings-beplanningsstrategië op aanlegverkeer selde in ag geneem. Hierdie artikel beskryf die ontwikkeling van ’n Besluitnemings Ondersteuningstelsel (DSS wat motorvervaardigers sal ondersteun in die analise van die effek van verskaffingsbeplanningbesluite op aanlegverkeer tydens die verskaffingsbeplanningsfase van hulle logistieke beplanningsproses. Hierdie DSS bestaan hoofsaaklik uit ’n Verskaffings-vervoermiddel Besluitnemingshulpmiddel (SMDST (’n interaktiewe MS-Excel model met “Visual Basic” koppelling asook ’n simulasiemodel van verkeersvloei (met eM-Plant simulasiesagteware.

  15. Elemental compositions of suspended particles released in glass manufacture

    Energy Technology Data Exchange (ETDEWEB)

    Mamuro, T; Mizohata, A; Kubota, T [Radiation Center of Osaka Prefecture, Sakai (Japan)

    1980-03-01

    Suspended particles released in glass manufacture were subjected to multielement analysis by means of instrumental neutron activation method and energy dispersive X-ray fluorescence spectrometry. Suspended particles emitted from glass manufacture generally consist of both particles emitted from glass fusion and those produced through fuel combustion (mainly oil combustion). Elemental compositions of suspended particles emitted from glass fusion were found to be strongly dependent on the kind and recipe of raw materials and additives. Of the various metallic elements involved in suspended particles emitted from glass fusion, the elements, As, Se, Cd, Sb, Pb and so on are regarded to produce the most serious air pollution. The amount of emission of these elements to the environment is, howerer, quite varied from manufacturer to manufacturer. The replacement of electric furnace by oil combustion in opal glass manufacture remarkably reduced the emission of metallic elements to the environment.

  16. Toward Meaningful Manufacturing Variation Data in Design - Feature Based Description of Variation in Manufacturing Processes

    DEFF Research Database (Denmark)

    Eifler, Tobias; Boorla, Srinivasa Murthy; Howard, Thomas J.

    2016-01-01

    The need to mitigate the effects of manufacturing variation already in design is nowadays commonly acknowledged and has led to a wide use of predictive modeling techniques, tolerancing approaches, etc. in industry. The trustworthiness of corresponding variation analyses is, however, not ensured...... by the availability of sophisticated methods and tools alone, but does evidently also depend on the accuracy of the input information used. As existing approaches for the description of manufacturing variation focus however, almost exclusively, on monitoring and controlling production processes, there is frequently...... a lack of objective variation data in design. As a result, variation analyses and tolerancing activities rely on numerous assumptions made to fill the gaps of missing or incomplete data. To overcome this hidden subjectivity, a schema for a consistent and standardised description of manufacturing...

  17. Cloud manufacturing distributed computing technologies for global and sustainable manufacturing

    CERN Document Server

    Mehnen, Jörn

    2013-01-01

    Global networks, which are the primary pillars of the modern manufacturing industry and supply chains, can only cope with the new challenges, requirements and demands when supported by new computing and Internet-based technologies. Cloud Manufacturing: Distributed Computing Technologies for Global and Sustainable Manufacturing introduces a new paradigm for scalable service-oriented sustainable and globally distributed manufacturing systems.   The eleven chapters in this book provide an updated overview of the latest technological development and applications in relevant research areas.  Following an introduction to the essential features of Cloud Computing, chapters cover a range of methods and applications such as the factors that actually affect adoption of the Cloud Computing technology in manufacturing companies and new geometrical simplification method to stream 3-Dimensional design and manufacturing data via the Internet. This is further supported case studies and real life data for Waste Electrical ...

  18. Manufacturing Renaissance : Return of manufacturing to western countries

    OpenAIRE

    Kianian, Babak; Larsson, Tobias; Tavassoli, Mohammad

    2013-01-01

    This chapter argues that the location of manufacturing is gradually shifting to the west again, exemplifying the ‘manufacturing renaissance’. Such a claim is based on the recent observed trend and the discussion is contextualized within the established theory that has been able to explain the location of manufacturing, that is, the product life cycle (PLC) model. Then the chapter identifies and discusses the four main drivers of this new phenomenon: (i) rising wage levels in emerging economie...

  19. Competitive manufacturing strategies for the manufacturing industries in Turkey

    OpenAIRE

    Ulusoy, Gündüz; Ulusoy, Gunduz

    2003-01-01

    In this study, results of the research into competitive manufacturing strategies of companies in four different sector studies covering 82 companies from the electronics, cement, automotive manufacturers, and appliances part and component suppliers in Turkey are presented. The data used in the study are gathered by conducting four sector surveys in 1997 and 1998 using a questionnaire supported by some follow-up interviews and site visits. A competitive manufacturing strategy is represented he...

  20. First detection of AmpC β-lactamase bla(CMY-2) on a conjugative IncA/C plasmid in a Vibrio parahaemolyticus isolate of food origin.

    Science.gov (United States)

    Li, Ruichao; Lin, Dachuan; Chen, Kaichao; Wong, Marcus Ho Yin; Chen, Sheng

    2015-07-01

    Vibrio parahaemolyticus is an important causative agent of gastroenteritis, with the consumption of contaminated seafood being the major transmission route. Resistance to penicillin is common among V. parahaemolyticus strains, whereas cephalosporin resistance remains rare. In an attempt to assess the current prevalence and characteristics of antibiotic resistance of this pathogen in common food samples, a total of 54 (17% of the total samples) V. parahaemolyticus strains were isolated from 318 meat and seafood samples purchased from supermarkets and wet markets in Shenzhen, China, in 2013. These isolates exhibited high-level resistance to ampicillin, yet they were mostly susceptible to other antimicrobials, except for two that were resistant to extended-spectrum cephalosporins. The β-lactamase gene blaPER-1 was detectable in one strain, V. parahaemolyticus V43, which was resistant to both third- and fourth-generation cephalosporins. Compared to other blaPER-1-positive V. parahaemolyticus strains reported in our previous studies, strain V43 was found to harbor an ∼200-kb conjugative plasmid carrying genes that were different from the antimicrobial resistance genes reported from the previous studies. The β-lactamase gene blaCMY-2 was detectable for the first time in another V. parahaemolyticus isolate, V4, which was resistant to third-generation cephalosporins. This blaCMY-2 gene was shown to be located in an ∼150-kb IncA/C-type conjugative plasmid with a genetic structure consisting of traB-traV-traA-ISEcp1-blaCMY-2-blc-sugE-encR-orf1-orf2-orf3-orf4-dsbC-traC, which is identical to that of other IncA/C conjugative plasmids in Enterobacteriaceae, albeit with a different size. These findings indicate that the transmission of extended-spectrum-β-lactamase (ESBL) and AmpC β-lactamase genes via conjugative plasmids can mediate the development of extended-spectrum cephalosporin resistance in V. parahaemolyticus, thereby posing a potential threat to public health

  1. Manufacturing halal in Malaysia

    DEFF Research Database (Denmark)

    Fischer, Johan

    2016-01-01

    In Arabic, halal literally means ‘permissible’ or ‘lawful’. Halal is no longer an expression of an esoteric form of production, trade and consumption, but part of a huge and expanding globalized market in which certification, standards and technoscience play important roles. Over the past three...... production, trade and consumption. Based on fieldwork in Malaysia, this article explores how manufacturing companies understand and practise halal certification, standards and technoscience. I argue that while existing studies of halal overwhelmingly explore micro-social aspects such as the everyday...... consumption among Muslim groups, ‘the bigger institutional picture’ that frames such consumption production and regulation are not well understood. By studying halal production, I provide an ethnography of the overlapping technologies and techniques of production and regulation that together warrant a product...

  2. Developments in fuel manufacturing

    International Nuclear Information System (INIS)

    Ion, S.E.; Harrop, G.; Maricalva Gonzalez, J.

    1995-01-01

    The status of the investment and R and D programmes in the UK and Spanish fuel fabrication facilities is outlined. Due to a number of circumstances, BNFL and ENUSA have been in the forefront of capital investment, with associated commitment to engineering and scientific research and development. Carrying through this investment has allowed the embodiment of proven state of the art technologies in the design of fuel fabrication plants, with particular emphasis on meeting the future challenge of health and safety, and product quality, at an acceptable cost. ENUSA and BNFL currently supply fuel, not only to their respective 'home' markets but also to France, Belgium, Sweden, and Germany. Both organisations employ an International Business outlook and partake in focused and speculative R and D projects for the design and manufacture of nuclear fuel. (orig./HP)

  3. Manufacture of Probiotic Bacteria

    Science.gov (United States)

    Muller, J. A.; Ross, R. P.; Fitzgerald, G. F.; Stanton, C.

    Lactic acid bacteria (LAB) have been used for many years as natural biopreservatives in fermented foods. A small group of LAB are also believed to have beneficial health effects on the host, so called probiotic bacteria. Probiotics have emerged from the niche industry from Asia into European and American markets. Functional foods are one of the fastest growing markets today, with estimated growth to 20 billion dollars worldwide by 2010 (GIA, 2008). The increasing demand for probiotics and the new food markets where probiotics are introduced, challenges the industry to produce high quantities of probiotic cultures in a viable and stable form. Dried concentrated probiotic cultures are the most convenient form for incorporation into functional foods, given the ease of storage, handling and transport, especially for shelf-stable functional products. This chapter will discuss various aspects of the challenges associated with the manufacturing of probiotic cultures.

  4. Transcriptome mapping of pAR060302, a blaCMY-2-positive broad-host-range IncA/C plasmid.

    Science.gov (United States)

    Lang, Kevin S; Danzeisen, Jessica L; Xu, Wayne; Johnson, Timothy J

    2012-05-01

    The multidrug resistance-encoding plasmids belonging to the IncA/C incompatibility group have recently emerged among Escherichia coli and Salmonella enterica strains in the United States. These plasmids have a unique genetic structure compared to other enterobacterial plasmid types, a broad host range, and a propensity to acquire large numbers of antimicrobial resistance genes via their accessory regions. Using E. coli strain DH5α harboring the prototype IncA/C plasmid pAR060302, we sought to define the baseline transcriptome of IncA/C plasmids under laboratory growth and in the face of selective pressure. The effects of ampicillin, florfenicol, or streptomycin exposure were compared to those on cells left untreated at logarithmic phase using Illumina platform-based RNA sequencing (RNA-Seq). Under growth in Luria-Bertani broth lacking antibiotics, much of the backbone of pAR060302 was transcriptionally inactive, including its putative transfer regions. A few plasmid backbone genes of interest were highly transcribed, including genes of a putative toxin-antitoxin system and an H-NS-like transcriptional regulator. In contrast, numerous genes within the accessory regions of pAR060302 were highly transcribed, including the resistance genes floR, bla(CMY-2), aadA, and aacA. Treatment with ampicillin or streptomycin resulted in no genes being differentially expressed compared to controls lacking antibiotics, suggesting that many of the resistance-associated genes are not differentially expressed due to exposure to these antibiotics. In contrast, florfenicol treatment resulted in the upregulation of floR and numerous chromosomal genes. Overall, the transcriptome mapping of pAR060302 suggests that it mitigates the fitness costs of carrying resistance-associated genes through global regulation with its transcriptional regulators.

  5. Expansion of plasmid mediated blaACT-2 among Pseudomonas aeruginosa associated with postoperative infection and its transcriptional response under cephalosporin stress.

    Directory of Open Access Journals (Sweden)

    Birson Ingti, Deepjyoti Paul, Anand Prakash Maurya

    2017-06-01

    Full Text Available Objectives: Organisms harboring multiple plasmid mediated β-lactamases are major concerns in nosocomial infections. Among these plasmid mediated β-lactamases, ACT (EBC family is a clinically important enzyme capable of hydrolyzing broad spectrum cephalosporins. Therefore, the present study was undertaken to determine the prevalence of ACT determinant along with other co-existing β-lactamase genes in P. aeruginosa strains. Methods: A total of 176 Pseudomonas isolates were phenotypically screened for the presence of AmpC β-lactamase by M3DET Method followed by Molecular detection using PCR assay. Transcriptional evaluation of blaACT-2 gene was analyzed by RT-PCR and its transferability was performed by transformation and conjugation. Results: Present study demonstrates the presence of ACT-2 allele among 12 strains of P. aeruginosa. Co-existence of other β-lactamase genes were encountered among ACT-2 harboring strains which includes CTX-M (n=2, SHV (n=3, TEM (n=2, VEB (n=2, OXA-10 (n=1, CIT (n=2 and DHA (n=3. Fingerprinting by REP PCR revealed the isolates harboring ACT-2 to be distinct and these isolates showed high resistance to expanded-spectrum cephalosporins and even to carbapenem group of drugs. This ACT-2 allele was encoded in the plasmid (L/M, FIA, FIB Inc. Group and conjugatively transferable. Transcriptional analysis revealed a significant increase in ACT-2 expression (483 fold when induced by ceftriaxone at 4 µg/ml followed by ceftazidime at 8 µg/ml (31 fold and cefotaxime 4 µg/ml (8 fold. Conclusion: In this study detection of ACT-2 plasmid mediated AmpC β-lactamase along with other β-lactamase genes in clinical isolates of P. aeruginosa represents a serious therapeutic challenge. Therefore, revision in antimicrobial policy is required for effective treatment of patients infected with pathogen expressing this mechanism. J Microbiol Infect Dis 2017; 7(2: 75-82

  6. Maintenance in sustainable manufacturing

    Directory of Open Access Journals (Sweden)

    Vladimir Stuchly

    2014-09-01

    Full Text Available Background: Sustainable development is about reaching a balance between economic, social, and environmental goals, as well as people's participation in the planning process in order to gain their input and support. For a company, sustainable development means adoption of such business strategy and actions that contribute to satisfying present needs of company and stakeholders, as well as simultaneous protection, maintenance and strengthening of human and environmental potential which will be needed in the future. This new approach forces manufacturing companies to change their previous management paradigms. New management paradigm should include new issues and develop innovative methods, practices and technologies striving for solving problem of shortages of resources, softening environment overload and enabling development of environment-friendly lifecycle of products. Hence, its realization requires updating existing production models as they are based on previously accepted paradigm of unlimited resources and unlimited regeneration capabilities. Maintenance plays a crucial role because of its impact on availability, reliability, quality and life cycle cost, thus it should be one of the main pillars of new business running model.  Material and methods: The following paper is a result of research on the literature and observation of practices undertaken by a company within maintenance area. Results and conclusions: The main message is that considering sustainable manufacturing requires considerable expanding range of analysis and focusing on supporting processes. Maintenance offers numerous opportunities of decreasing influence of business processes on natural environment and more efficient resources utilization. The goal of maintenance processes realizing sustainable development strategy is increased profitability of exploitation and optimization of total lifecycle cost without disturbing safety and environmental issues. 

  7. Manufacturing consumption of energy 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the U.S. economy based on data from the Manufacturing Energy Consumption Survey. The sample used in this report represented about 250,000 of the largest manufacturing establishments which account for approximately 98 percent of U.S. economic output from manufacturing, and an expected similar proportion of manufacturing energy use. The amount of energy use was collected for all operations of each establishment surveyed. Highlights of the report include profiles for the four major energy-consuming industries (petroleum refining, chemical, paper, and primary metal industries), and an analysis of the effects of changes in the natural gas and electricity markets on the manufacturing sector. Seven appendices are included to provide detailed background information. 10 figs., 51 tabs.

  8. Manufacturing consumption of energy 1991

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    This report provides estimates on energy consumption in the manufacturing sector of the US economy. These estimates are based on data from the 1991 Manufacturing Energy Consumption Survey (MECS). This survey--administered by the Energy End Use and Integrated Statistics Division, Office of Energy Markets and End Use, Energy Information Administration (EIA)--is the most comprehensive source of national-level data on energy-related information for the manufacturing industries.

  9. Green manufacturing processes and systems

    Energy Technology Data Exchange (ETDEWEB)

    Davim, J. Paulo (ed.) [Aveiro Univ. (Portugal). Dept. of Mechanical Engineering, Campus Universitario de Santiago

    2013-02-01

    This book provides the recent advances on green manufacturing processes and systems for modern industry. Chapter 1 provides information on sustainable manufacturing through environmentally-friendly machining. Chapter 2 is dedicated to environmentally-friendly machining: vegetable based cutting fluids. Chapter 3 describes environmental-friendly joining of tubes. Chapter 4 contains information on concepts, methods and strategies for zero-waste in manufacturing. Finally, chapter 5 is dedicated to the application of hybrid MCDM approach for selecting the best tyre recycling process.

  10. The state of biopharmaceutical manufacturing.

    Science.gov (United States)

    Molowa, David T; Mazanet, Rosemary

    2003-01-01

    The manufacturing of protein-based biopharmaceuticals is done in bacterial or mammalian cell cultures. While bacterial cultures are inexpensive, dependable, and approved by regulatory authorities, many complex proteins cannot be manufactured this way. Complex proteins must be manufactured in mammalian cell cultures to produce active products. Mammalian cell culture capacity is limited and has slowed the delivery of necessary biopharmaceutical products to patients. The nature of the production capacity problem and future outlook are critically examined.

  11. Wide and High Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Post, Brian K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Roschli, Alex C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-03-01

    The goal of this project is to develop and demonstrate the enabling technologies for Wide and High Additive Manufacturing (WHAM). WHAM will open up new areas of U.S. manufacturing for very large tooling in support of the transportation and energy industries, significantly reducing cost and lead time. As with Big Area Additive Manufacturing (BAAM), the initial focus is on the deposition of composite materials.

  12. Virtual CIM and Digital Manufacturing

    Institute of Scientific and Technical Information of China (English)

    Sev V.Nagalingam; Grier C.I.Lin

    2006-01-01

    Manufacturing enterprises play an important role in improving the economic environment of a country.Today, the capability to produce high quality products with shorter delivery time and the ability to produce according to the diverse customer requirements has become the characteristics of successful manufacturing industries. Application of intelligent manufacturing systems and Computer integrated manufacturing (CIM) are the most effective methods for overcoming the issues faced by present day manufactures while retaining the employment level and revenue of a country in today's highly competitive global market. With the developments taking place in CIM and its related technologies, the application of CIM in manufacturing enterprises has become a reality from the dream. This paper highlights the historical developments towards automation and the need for CIM systems. Furthermore, it analyses some new terms such as agile manufacturing, digital manufacturing, agent-based manufacturing and others, which have been emerging recently, and argues all these new technologies are the subsystems of CIM. In addition, this paper provides a new direction in CIM to fulfil the emerging challenges in today's global market and to satisfy the emerging need of virtual enterprises in the form of Virtual CIM.

  13. Advanced manufacturing technologies modern machining, advanced joining, sustainable manufacturing

    CERN Document Server

    2017-01-01

    This book provides details and collective information on working principle, process mechanism, salient features, and unique applications of various advanced manufacturing techniques and processes belong. The book is divided in three sessions covering modern machining methods, advanced repair and joining techniques and, finally, sustainable manufacturing. The latest trends and research aspects of those fields are highlighted.

  14. Manufacturing Math Classes: An Instructional Program Guide for Manufacturing Workers.

    Science.gov (United States)

    McBride, Pamela G.; And Others

    This program guide documents a manufacturing job family curriculum that develops competence in generic work force education skills through three courses: Reading Rulers, Charts, and Gauges and Math for Manufacturing Workers I and II. An annotated table of contents lists a brief description of the questions answered in each section. An introduction…

  15. Connecting American Manufacturers (CAM)

    Science.gov (United States)

    2013-09-01

    thread were reported. 15. SUBJECT TERMS supply chain; e-sourcing; online portal; RFQ; online marketplace 16. SECURITY CLASSIFICATION OF: 17...upon their existing online industrial networking platform, VizSpace, by establishing the America’s VOICe marketplace, which small and medium U.S... marketing , training, communications, and relationships of six economic development organizations located around the country. To fulfill the

  16. Manufacturing strategy issues in selected Indian manufacturing industry

    Directory of Open Access Journals (Sweden)

    Mahender Singh

    2013-03-01

    Full Text Available This paper presents some findings of Indian manufacturing sectors viz. automobile (especially two-wheeler, tractor and general manufacturing industry. Various manufacturing strategy issues such as competitive priorities, improvement activities, and performance measures, have been identified and assessed in Indian context. Sector wise comparison of competitive priorities, improvement activities i.e. advanced manufacturing technology (AMT, integrated information systems (IIS, and advanced management systems (AMS, and performance measure, is provided. Our results showed that most of the Indian companies are still emphasizing on quality. However, automobile sector has set to compete globally with high innovation rate, faster new product development, and continuous improvement. It is also observed that Indian companies are investing more in AMS as compared to IIS and AMT. Manufacturing competence index is also computed for each sector.

  17. Advanced Manufacture of Reflectors

    Energy Technology Data Exchange (ETDEWEB)

    Angel, Roger [Univ. of Arizona, Tucson, AZ (United States)

    2014-12-17

    The main project objective has been to develop an advanced gravity sag method for molding large glass solar reflectors with either line or point focus, and with long or short focal length. The method involves taking standard sized squares of glass, 1.65 m x 1.65 m, and shaping them by gravity sag into precision steel molds. The method is designed for high volume manufacture when incorporated into a production line with separate pre-heating and cooling. The performance objectives for the self-supporting glass mirrors made by this project include mirror optical accuracy of 2 mrad root mean square (RMS), requiring surface slope errors less than 1 mrad rms, a target not met by current production of solar reflectors. Our objective also included development of new methods for rapidly shaping glass mirrors and coating them for higher reflectivity and soil resistance. Reflectivity of 95% for a glass mirror with anti-soil coating was targeted, compared to the present ~94% with no anti-soil coating. Our mirror cost objective is ~$20/m2 in 2020, a significant reduction compared to the present ~$35/m2 for solar trough mirrors produced for trough solar plants.

  18. Additive Manufactured Superconducting Cavities

    Science.gov (United States)

    Holland, Eric; Rosen, Yaniv; Woolleet, Nathan; Materise, Nicholas; Voisin, Thomas; Wang, Morris; Mireles, Jorge; Carosi, Gianpaolo; Dubois, Jonathan

    Superconducting radio frequency cavities provide an ultra-low dissipative environment, which has enabled fundamental investigations in quantum mechanics, materials properties, and the search for new particles in and beyond the standard model. However, resonator designs are constrained by limitations in conventional machining techniques. For example, current through a seam is a limiting factor in performance for many waveguide cavities. Development of highly reproducible methods for metallic parts through additive manufacturing, referred to colloquially as 3D printing\\x9D, opens the possibility for novel cavity designs which cannot be implemented through conventional methods. We present preliminary investigations of superconducting cavities made through a selective laser melting process, which compacts a granular powder via a high-power laser according to a digitally defined geometry. Initial work suggests that assuming a loss model and numerically optimizing a geometry to minimize dissipation results in modest improvements in device performance. Furthermore, a subset of titanium alloys, particularly, a titanium, aluminum, vanadium alloy (Ti - 6Al - 4V) exhibits properties indicative of a high kinetic inductance material. This work is supported by LDRD 16-SI-004.

  19. APPROACHES FOR SUSTAINABLE MANUFACTURING

    Institute of Scientific and Technical Information of China (English)

    G(U)NTHER Seliger; SEBASTIAN Kernbaum; MARCO Zettl

    2007-01-01

    Sustainable development is a holistic approach harmonizing ecological, economical and socio-political needs with respect to the superior objective of enhancing human living standards. Thereby the availability of natural resources and the conservation of the ecosystems have to be considered that future generations have the possibility to meet their own needs. A long-term economical development demands the transition from a source-sink economy to a cycle economy as a result of limited resources, limited environmental capacities to absorb waste and emissions as well as increasing needs of a growing population. A reference model for sustainability in manufacturing is presented and used to illustrate sustainable approaches with respect to management, technology, process and product. Adaptation of products and components is a vital element for supporting efficient reuse of products and components. Consequently adaptation contributes to the ambitious goals of sustainability. Technological enablers for adaptation as modularity, information and communication technology are exemplarily introduced. Moreover, approaches for disseminating knowledge in sustainability are given.

  20. Balances instruments, manufacturers, history

    CERN Document Server

    Robens, Erich; Kiefer, Susanne

    2014-01-01

    The book deals mainly with direct mass determination by means of a conventional balances. It covers the history of the balance from the beginnings in Egypt earlier than 3000 BC to recent developments. All balance types are described with emphasis on scientific balances. Methods of indirect mass determination, which are applied to very light objects like molecules and the basic particles of matter and celestial bodies, are included.  As additional guidance, today’s manufacturers are listed and the profile of important companies is reviewed. Several hundred photographs, reproductions and drawings show instruments and their uses. This book includes commercial weighing instruments for merchandise and raw materials in workshops as well as symbolic weighing in the ancient Egyptian’s ceremony of ‘Weighing of the Heart’, the Greek fate balance, the Roman  Justitia, Juno Moneta and Middle Ages scenes of the Last Judgement with Jesus or St. Michael and of modern balances. The photographs are selected from the...

  1. Application of manufactured products

    Science.gov (United States)

    Sastri, Sankar; Duke, Michael B.

    1992-01-01

    A wide range of products can be manufactured from the following materials: (1) lunar regolith or basalt; (2) regolith or rock beneficiated to concentrate plagioclase or other minerals; (3) iron, extracted from lunar soil or rocks by various means; (4) naturally occurring or easily obtained materials that have cementitious properties; and (5) byproducts of the above materials. Among the products that can be produced from these materials are the following: beams; plates and sheets; transparent plates (windows); bricks and blocks; pipes and tubes; low-density materials (foams); fiber, wire, and cables; foils and reflective coatings; hermetic seals (coatings); and formed objects. In addition to oxygen, which can be obtained by several processes, either from unbeneficiated regolith or by reduction of concentrated ilmenite, these materials make the simplest requirements of the lunar resource extraction system. A thorough analysis of the impact of these simplest products on the economics of space operations is not possible at this point. Research is necessary both to define optimum techniques and adapt them to space and to determine the probable market for the products so that the priority of various processes can be assessed. Discussions of the following products are presented: aerobraking heat shields; pressurized habitats; lunar photovoltaic farms; and agricultural systems.

  2. Training for New Manufacturing Technologies.

    Science.gov (United States)

    Jacobs, James

    1988-01-01

    Examines the effects of computer-based manufacturing technologies on employment opportunities and job skills. Describes the establishment of the Industrial Technology Institute in Michigan to develop and utilize advanced manufacturing technologies, and the institute's relationship to the state's community colleges. Reviews lessons learned from…

  3. 75 FR 30781 - Manufacturing Council

    Science.gov (United States)

    2010-06-02

    ... convenience. Pending applicants remain under consideration and do not need to resubmit their applications..., particularly seeking the representation of small- and medium-sized enterprises. Additional factors which may be... marketing programs in support of manufacturing industries, job creation in the manufacturing sector, or the...

  4. Topology Optimization for Additive Manufacturing

    DEFF Research Database (Denmark)

    Clausen, Anders

    This PhD thesis deals with the combination of topology optimization and additive man-ufacturing (AM, also known as 3D-printing). In addition to my own works, the thesis contains a broader review and assessment of the literature within the field. The thesis first presents a classification...... of the various AM technologies, a review of relevant manufacturing materials, the properties of these materials in the additively manufactured part, as well as manufacturing constraints with a potential for design optimization. Subsequently, specific topology optimization formulations relevant for the most im...... for scalable manufacturing. In relation to interface problems it is shown how a flexible void area may be included into a standard minimum compliance problem by employing an additional design variable field and a sensitivity filter. Furthermore, it is shown how the design of coated structures may be modeled...

  5. Business models for additive manufacturing

    DEFF Research Database (Denmark)

    Hadar, Ronen; Bilberg, Arne; Bogers, Marcel

    2015-01-01

    Digital fabrication — including additive manufacturing (AM), rapid prototyping and 3D printing — has the potential to revolutionize the way in which products are produced and delivered to the customer. Therefore, it challenges companies to reinvent their business model — describing the logic...... of creating and capturing value. In this paper, we explore the implications that AM technologies have for manufacturing systems in the new business models that they enable. In particular, we consider how a consumer goods manufacturer can organize the operations of a more open business model when moving from...... a manufacturer-centric to a consumer-centric value logic. A major shift includes a move from centralized to decentralized supply chains, where consumer goods manufacturers can implement a “hybrid” approach with a focus on localization and accessibility or develop a fully personalized model where the consumer...

  6. Manufacturing best practices and performance

    DEFF Research Database (Denmark)

    Szász, Levente; Demeter, Krisztina; Boer, Harry

    2014-01-01

    whether a) home and host country characteristics moderate the association between manufacturing practices and performance, and, thus, whether b) there are manufacturing practices that are universally best. Manufacturing practices and performance are measured using data collected through the fifth round...... analysis is used to develop groups of companies based on home and host country development. Exploratory factor analysis is applied to create bundles of manufacturing practices and performance measures. Then, using moderated multiple regressions (MMR) with interaction factor, and separate multiple...... regression analyses for each group of companies, bundles of manufacturing practices are identified that lead to best-in-class performance improvements. A range of control variables is introduced to help interpret the results. The study shows that home and host country context does affect the association...

  7. Process for the manufacture of whey products

    Energy Technology Data Exchange (ETDEWEB)

    Blanie, P

    1980-01-01

    Whey is subjected to ultrafiltration to retain about 10% of the T5, whilst the permeate is demineralized to 7% or less ash in the final product and dried to 3% moisture. The product, containing (in DM) 75% or more lactose, 6% or less protein and 8% or less minerals, is hydrolysed, e.g. with beta-galactosidase. It may be used for replacing sucrose, in the manufacture of a range of foods. Applications include chewing gum, fondants, nougats, chocolate, bakery and confectionery products as well as cream and yoghurt.

  8. Virtual Manufacturing Techniques Designed and Applied to Manufacturing Activities in the Manufacturing Integration and Technology Branch

    Science.gov (United States)

    Shearrow, Charles A.

    1999-01-01

    One of the identified goals of EM3 is to implement virtual manufacturing by the time the year 2000 has ended. To realize this goal of a true virtual manufacturing enterprise the initial development of a machinability database and the infrastructure must be completed. This will consist of the containment of the existing EM-NET problems and developing machine, tooling, and common materials databases. To integrate the virtual manufacturing enterprise with normal day to day operations the development of a parallel virtual manufacturing machinability database, virtual manufacturing database, virtual manufacturing paradigm, implementation/integration procedure, and testable verification models must be constructed. Common and virtual machinability databases will include the four distinct areas of machine tools, available tooling, common machine tool loads, and a materials database. The machine tools database will include the machine envelope, special machine attachments, tooling capacity, location within NASA-JSC or with a contractor, and availability/scheduling. The tooling database will include available standard tooling, custom in-house tooling, tool properties, and availability. The common materials database will include materials thickness ranges, strengths, types, and their availability. The virtual manufacturing databases will consist of virtual machines and virtual tooling directly related to the common and machinability databases. The items to be completed are the design and construction of the machinability databases, virtual manufacturing paradigm for NASA-JSC, implementation timeline, VNC model of one bridge mill and troubleshoot existing software and hardware problems with EN4NET. The final step of this virtual manufacturing project will be to integrate other production sites into the databases bringing JSC's EM3 into a position of becoming a clearing house for NASA's digital manufacturing needs creating a true virtual manufacturing enterprise.

  9. Sensibility and Subjectivity: Levinas’ Traumatic Subject

    Directory of Open Access Journals (Sweden)

    Rashmika Pandya

    2011-02-01

    Full Text Available The importance of Levinas’ notions of sensibility and subjectivity are evident in the revision of phenomenological method by current phenomenologists such as Jean-Luc Marion and Michel Henry. The criticisms of key tenants of classical phenomenology, intentionality and reduction, are of a particular note. However, there are problems with Levinas’ characterization of subjectivity as essentially sensible. In “Totality and Infinity” and “Otherwise than Being”, Levinas criticizes and recasts a traditional notion of subjectivity, particularly the notion of the subject as the first and foremost rational subject. The subject in Levinas’ works is characterized more by its sensibility and affectedness than by its capacity to reason or affect its world. Levinas ties rationality to economy and suggests an alternative notion of reason that leads to his analysis of the ethical relation as the face-to-face encounter. The ‘origin’ of the social relation is located not in our capacity to know but rather in a sensibility that is diametrically opposed to the reason understood as economy. I argue that the opposition in Levinas’ thought between reason and sensibility is problematic and essentially leads to a self-conflicted subject. In fact, it would seem that violence characterizes the subject’s self-relation and, thus, is also inscribed at the base of the social relation. Rather than overcoming a problematic tendency to dualistic thought in philosophy Levinas merely reverses traditional hierarchies of reason/emotion, subject/object and self/other. 

  10. Organizing for manufacturing innovation. The case of Flexible Manufacturing Systems

    DEFF Research Database (Denmark)

    Boer, Harry; Krabbendam, Koos

    1992-01-01

    addressing the manufacturing innovation process are even fewer and provide little insight into its true nature. Consequently, little is known about the effective organization of such processes. In the present article an organization model of manufacturing innovation is described, and its practicability...... the implementation of new technology effectively. This is not surprising, considering the innovative nature of this process. Although there is a host of literature on innovation, organization and (the benefits of) new technology, the literature in which these areas are linked together is scarce. Publications...... assessed using the results of seven case studies of the implementation of flexible manufacturing systems in British, Belgian and Dutch mechanical engineering companies....

  11. Bla-bla-bla: video chat service on the Internet, a market feasibility study

    NARCIS (Netherlands)

    Lindgreen, A.; Antioco, M.D.J.; Wetzels, M.G.M.

    2004-01-01

    The Internet is changing the way that companies carry out their business and, in fact, constitutes an entirely new application domain, which makes product innovation possible. Moreover, it is a new medium for reaching consumers, which is a central preoccupation to organisations in the current

  12. Bla-bla-bla: video chat service on the Internet - a market feasibility study

    OpenAIRE

    Lindgreen, Adam; Antioco, Michael; Wetzels, Martin

    2004-01-01

    The Internet is changing the way that companies carry out their business and, in fact, constitutes an entirely new application domain, which makes product innovation possible. Moreover, it is a new medium for reaching consumers, which is a central preoccupation to organisations in the current business market. Here interest lies in video chatting on the Internet. This is a type of service that adds video support to chatting using a Web cam and is gradually attracting more Internet users. The p...

  13. Spread of ISCR1 Elements Containing blaDHA-1 and Multiple Antimicrobial Resistance Genes Leading to Increase of Flomoxef Resistance in Extended-Spectrum-β-Lactamase-Producing Klebsiella pneumoniae▿

    Science.gov (United States)

    Lee, Chen-Hsiang; Liu, Jien-Wei; Li, Chia-Chin; Chien, Chun-Chih; Tang, Ya-Fen; Su, Lin-Hui

    2011-01-01

    Increasing resistance to quinolones, aminoglycosides, and/or cephamycins in extended-spectrum-β-lactamase (ESBL)-producing Enterobacteriaceae exacerbates the already limited antibiotic treatment options for infections due to these microbes. In this study, the presence of resistance determinants for these antimicrobial agents was examined by PCR among ESBL-producing Klebsiella pneumoniae (ESBL-KP) isolates that caused bacteremia. Pulsed-field gel electrophoresis was used to differentiate the clonal relationship among the isolates studied. Transferability and the location of the resistance genes were analyzed by conjugation experiments, followed by DNA-DNA hybridization. Among the 94 ESBL-KP isolates studied, 20 isolates of flomoxef-resistant ESBL-KP were identified. They all carried a DHA-1 gene and were genetically diverse. CTX-M genes were found in 18 of the isolates. Among these DHA-1/CTX-M-producing K. pneumoniae isolates, ISCR1 was detected in 13 (72%) isolates, qnr genes (1 qnrA and 17 qnrB genes) were detected in 18 (100%), aac(6′)-Ib-cr was detected in 11 (61%), and 16S rRNA methylase (all armA genes) was detected in 14 (78%). Four transconjugants were available for further analysis, and qnrB4, aac(6′)-Ib-cr, armA, and blaDHA-1 were all identified on these self-transferable blaCTX-M-carrying plasmids. The genetic environments of ISCR1 associated with armA, blaDHA-1, and qnrB4 genes in the four transconjugants were identical. Replicon-type analysis revealed a FIIA plasmid among the four self-transferable plasmids, although the other three were nontypeable. The cotransfer of multiple resistance genes with the ISCR1 element-carrying plasmids has a clinical impact and warrants close monitoring and further study. PMID:21746945

  14. Collateral damage of flomoxef therapy: in vivo development of porin deficiency and acquisition of blaDHA-1 leading to ertapenem resistance in a clinical isolate of Klebsiella pneumoniae producing CTX-M-3 and SHV-5 beta-lactamases.

    Science.gov (United States)

    Lee, Chen-Hsiang; Chu, Chishih; Liu, Jien-Wei; Chen, Yi-Shung; Chiu, Chiung-Jung; Su, Lin-Hui

    2007-08-01

    The study aimed to characterize the genetic basis of flomoxef and collateral ertapenem resistance in a clinical isolate of extended-spectrum beta-lactamase-producing Klebsiella pneumoniae (ESBL-KP) after flomoxef exposure. Four ESBL-KP isolates (Lkp11-14) were recovered sequentially from four episodes of bacteraemia in an elderly patient. Laboratory investigations included genotyping by PFGE, resistance gene analysis by PCR and sequencing, and outer membrane protein analysis by SDS-PAGE. Plasmid analysis by DNA-DNA hybridization, electroporation and conjugation was also performed. Lkp14 was recovered after 21 days of flomoxef therapy. It demonstrated an indistinguishable PFGE pattern when compared with those produced by Lkp11-13. However, resistance to both flomoxef and ertapenem emerged in Lkp14. Molecular characterization revealed that, in addition to the pre-existing ESBL production (CTX-M-3 and SHV-5) and OmpK35 deficiency found in Lkp11-13, Lkp14 had acquired an extra plasmid-mediated AmpC beta-lactamase gene (blaDHA-1) and failed to express OmpK36, because of insertional inactivation by an insertion sequence IS5. Other resistance mechanisms, such as production of carbapenem-hydrolysing enzymes or expression of chromosomal efflux, were apparently not involved. Conjugational transfer of the plasmid-mediated blaDHA-1 gene into Lkp11 resulted in a significant increase in the MICs of cephamycins and beta-lactamase inhibitors, but not in those of carbapenems. Lkp14 was apparently derived from the previously flomoxef-susceptible isolates, Lkp11-13. After flomoxef exposure, the in vivo acquisition of the plasmid-mediated blaDHA-1 gene has led to flomoxef resistance in Lkp14, and the concomitant depletion of OmpK36 expression has resulted in a collateral effect of ertapenem resistance and diminished susceptibilities to imipenem and meropenem.

  15. Spread of ISCR1 elements containing blaDHA-₁ and multiple antimicrobial resistance genes leading to increase of flomoxef resistance in extended-spectrum-beta-lactamase-producing Klebsiella pneumoniae.

    Science.gov (United States)

    Lee, Chen-Hsiang; Liu, Jien-Wei; Li, Chia-Chin; Chien, Chun-Chih; Tang, Ya-Fen; Su, Lin-Hui

    2011-09-01

    Increasing resistance to quinolones, aminoglycosides, and/or cephamycins in extended-spectrum-β-lactamase (ESBL)-producing Enterobacteriaceae exacerbates the already limited antibiotic treatment options for infections due to these microbes. In this study, the presence of resistance determinants for these antimicrobial agents was examined by PCR among ESBL-producing Klebsiella pneumoniae (ESBL-KP) isolates that caused bacteremia. Pulsed-field gel electrophoresis was used to differentiate the clonal relationship among the isolates studied. Transferability and the location of the resistance genes were analyzed by conjugation experiments, followed by DNA-DNA hybridization. Among the 94 ESBL-KP isolates studied, 20 isolates of flomoxef-resistant ESBL-KP were identified. They all carried a DHA-1 gene and were genetically diverse. CTX-M genes were found in 18 of the isolates. Among these DHA-1/CTX-M-producing K. pneumoniae isolates, ISCR1 was detected in 13 (72%) isolates, qnr genes (1 qnrA and 17 qnrB genes) were detected in 18 (100%), aac(6')-Ib-cr was detected in 11 (61%), and 16S rRNA methylase (all armA genes) was detected in 14 (78%). Four transconjugants were available for further analysis, and qnrB4, aac(6')-Ib-cr, armA, and bla(DHA-1) were all identified on these self-transferable bla(CTX-M)-carrying plasmids. The genetic environments of ISCR1 associated with armA, bla(DHA-1), and qnrB4 genes in the four transconjugants were identical. Replicon-type analysis revealed a FIIA plasmid among the four self-transferable plasmids, although the other three were nontypeable. The cotransfer of multiple resistance genes with the ISCR1 element-carrying plasmids has a clinical impact and warrants close monitoring and further study.

  16. Prevalence of blaZ gene types and the cefazolin inoculum effect among methicillin-susceptible Staphylococcus aureus blood isolates and their association with multilocus sequence types and clinical outcome.

    Science.gov (United States)

    Chong, Y P; Park, S-J; Kim, E S; Bang, K-M; Kim, M-N; Kim, S-H; Lee, S-O; Choi, S-H; Jeong, J-Y; Woo, J H; Kim, Y S

    2015-02-01

    Cefazolin treatment failures have been described for bacteraemia caused by methicillin-susceptible Staphylococcus aureus (MSSA) with type A β-lactamase and inoculum effect (InE). We investigated the prevalence of blaZ (β-lactamase) gene types and a cefazolin InE among MSSA blood isolates in South Korea and evaluated their association with specific genotypes. The clinical impact of the cefazolin InE was also evaluated. A total of 220 MSSA isolates were collected from a prospective cohort study of S. aureus bacteraemia. A pronounced InE with cefazolin was defined as a ≥4-fold increase in the minimum inhibitory concentration (MIC) between a standard and high inoculum, resulting in a non-susceptible MIC. Sequencing of blaZ and multilocus sequence typing (MLST) were performed. Clinical outcomes were assessed in 77 patients treated with cefazolin. The blaZ gene was detected in 92 % of the 220 MSSA isolates. Type C β-lactamase was the most common (53 %), followed by type B (20 %) and type A (17 %). Certain genotypes were significantly associated with specific β-lactamase types (notably, ST30 and type A β-lactamase). A pronounced cefazolin InE was observed in 13 % of isolates. Most of these (79 %) expressed type A β-lactamase and ST30 was the predominant (55 %) clone amongst them. Cefazolin treatment failure was not observed in patients infected with strains exhibiting a pronounced InE. These strains had no impact on other clinical outcomes. In conclusion, the prevalence of a pronounced InE with cefazolin could be dependent upon distributions of MSSA genotypes. Cefazolin can likely be used for the treatment of MSSA bacteraemia (except endocarditis), without consideration of an InE.

  17. Detecting Attacks in CyberManufacturing Systems: Additive Manufacturing Example

    Directory of Open Access Journals (Sweden)

    Wu Mingtao

    2017-01-01

    Full Text Available CyberManufacturing System is a vision for future manufacturing where physical components are fully integrated with computational processes in a connected environment. However, realizing the vision requires that its security be adequately ensured. This paper presents a vision-based system to detect intentional attacks on additive manufacturing processes, utilizing machine learning techniques. Particularly, additive manufacturing systems have unique vulnerabilities to malicious attacks, which can result in defective infills but without affecting the exterior. In order to detect such infill defects, the research uses simulated 3D printing process images as well as actual 3D printing process images to compare accuracies of machine learning algorithms in classifying, clustering and detecting anomalies on different types of infills. Three algorithms - (i random forest, (ii k nearest neighbor, and (iii anomaly detection - have been adopted in the research and shown to be effective in detecting such defects.

  18. Advanced Manufacturing Technologies (AMT): Modular Rapidly Manufactured SmallSat

    Data.gov (United States)

    National Aeronautics and Space Administration — Utilize advanced manufacturing processes to design and fabricate a fully functional prototype flight model, with the goal of demonstrating rapid on-orbit assembly of...

  19. Knowledge Transfer and Manufacturing Relocation in International Manufacturing Networks

    DEFF Research Database (Denmark)

    Madsen, Erik Skov

    2014-01-01

    This paper is built on six longitudinal case studies of knowledge transfer in manufacturing relocation. By focusing on tacit and explicit knowledge the paper introduces a model for identification of knowledge in relation to four task situations on the shop floor in a manufacturing environment...... after relocation. Finally the paper discusses how “dispatching capacity” and “absorptive capacity” can improve the process....

  20. Characterisation of IncA/C2 plasmids carrying an In416-like integron with the blaVIM-19 gene from Klebsiella pneumoniae ST383 of Greek origin.

    Science.gov (United States)

    Papagiannitsis, Costas C; Dolejska, Monika; Izdebski, Radosław; Giakkoupi, Panagiota; Skálová, Anna; Chudějová, Kateřina; Dobiasova, Hana; Vatopoulos, Alkiviadis C; Derde, Lennie P G; Bonten, Marc J M; Gniadkowski, Marek; Hrabák, Jaroslav

    2016-02-01

    The complete nucleotide sequences of three multidrug resistance (MDR) IncA/C-like plasmids from Enterobacteriaceae isolates carrying the VIM-type carbapenemase-encoding integrons In4863 (blaVIM-19-aacA7-dfrA1-ΔaadA1-smr2) or In4873 (blaVIM-1-aacA7-dfrA1-ΔaadA1-smr2) were determined, which are the first In416-like elements identified in Greece. Plasmids pKP-Gr642 and pKP-Gr8143 were from Klebsiella pneumoniae ST383 isolates, whereas plasmid pEcl-Gr4873 was from an Enterobacter cloacae ST88 isolate. Sequencing showed that pKP-Gr642 (162787bp) and pKP-Gr8143 (154395bp) consisted of the type 1 IncA/C2 conserved backbone, the blaCMY-2-like gene-containing region, and the ARI-B (with the sul2 gene) and ARI-A (with a class 1 integron) resistance islands, like the plasmid pUMNK88_161 from the USA. The third plasmid, pEcl-Gr4873 (153958bp), exhibited extensive similarity with the type 2 IncA/C2 plasmid pR55 from France. pEcl-Gr4873 carried only one resistance island of a hybrid transposon structure inserted in a different location to ARI-A in type 1 A/C2 plasmids. In all three plasmids, the In416-like integrons In4863 or In4873 were identified within non-identical class II transposon structures. All three In416-like-carrying regions presented significant similarities with the MDR region of the IncA/C2 plasmid pCC416 from Italy, carrying the prototype In416 integron (blaVIM-4-aacA7-dfrA1-ΔaadA1-smr2). These findings provided the basis for speculations regarding the evolution of IncA/C2 plasmids with In416-like integrons, and confirmed the rapid evolution of some IncA/C2 plasmid lineages. Considering the broad host range of IncA/C2 molecules, it seems that pKP-Gr642, pKP-Gr8143 and pEcl-Gr4873 plasmids might support the diffusion of In416-like integrons among Enterobacteriaceae. Copyright © 2015 Elsevier B.V. and the International Society of Chemotherapy. All rights reserved.

  1. Complete sequences of IncHI1 plasmids carrying blaCTX-M-1 and qnrS1 in equine Escherichia coli provide new insights into plasmid evolution

    DEFF Research Database (Denmark)

    Dolejska, Monika; Villa, Laura; Minoia, Marco

    2014-01-01

    OBJECTIVES: To determine the structure of two multidrug-resistant IncHI1 plasmids carrying blaCTX-M-1 in Escherichia coli isolates disseminated in an equine clinic in the Czech Republic. METHODS: A complete nucleotide sequencing of 239 kb IncHI1 (pEQ1) and 287 kb IncHI1/X1 (pEQ2) plasmids was per...... highlight the structure and evolution of IncHI1 from equine E. coli. A plasmid-mediated sugar metabolic element could play a key role in strain fitness, contributing to the successful dissemination and maintenance of these plasmids in the intestinal microflora of horses....

  2. Integrated Glass Coating Manufacturing Line

    Energy Technology Data Exchange (ETDEWEB)

    Brophy, Brenor [Enki Technology Inc., San Jose, CA (United States)

    2015-09-30

    This project aims to enable US module manufacturers to coat glass with Enki’s state of the art tunable functionalized AR coatings at the lowest possible cost and highest possible performance by encapsulating Enki’s coating process in an integrated tool that facilitates effective process improvement through metrology and data analysis for greater quality and performance while reducing footprint, operating and capital costs. The Phase 1 objective was a fully designed manufacturing line, including fully specified equipment ready for issue of purchase requisitions; a detailed economic justification based on market prices at the end of Phase 1 and projected manufacturing costs and a detailed deployment plan for the equipment.

  3. Support given by the manufacturer

    International Nuclear Information System (INIS)

    Schomer, E.

    1993-01-01

    As regards German NPP, the purchaser has the control function and the manufacturer the role of a general planner binding together all supply lots. Therefore the manufacturer possesses a very broad and thorough detailed knowledge of the plant functioning and becomes a life-long important partner of the plant. Such partnership requires from the manufacturer to provide continuously available and economical services to the plant; he must work purposefully in a quality-conscious and innovative way. This is his vision, and he will comply with it over the whole service life of the plant. The importance of services is illustrated by a large number of examples. (orig./DG) [de

  4. Micro manufacturing techniques and applications

    CERN Document Server

    Du, Ruxu; Li, Zifu

    2013-01-01

    Micro/meso-scale manufacturing has been developed in research fields of machining, forming, materials and others, but its potential to industries are yet to be fully realized. The theme of the current volume was to build a bridge joining academic research and industrial needs in micro manufacturing. Among the 12 papers selected for publication are three keynote addresses onmicro and desktop factories for micro/meso-scale manufacturing applicationsand future visions, tissue cutting mechanics and applications for needlecore biopsy and guidance, and micro-texturing onto amorphous carbonmaterials

  5. An Assessment of Advanced Manufacturing Technologies Implementation in Manufacturing Enterprises

    Directory of Open Access Journals (Sweden)

    Ghulam Yasin Shaikh

    2011-04-01

    Full Text Available The implementation of AMTs (Advanced Manufacturing Technologies has always been the high interest and core issue for the manufacturing enterprises to get rapid production for global market place. The developed countries have achieved its competitive advantage by implementing this unique model of technologies with full range of systems. In developing countries, the implementation of such technologies is not much common due to so many reasons, (political, social, economical and technical but entrepreneurs of growing economies are contemplating to reshape long term strategy to adopt Computer systems oriented technologies in their manufacturing companies to meet the growing needs of their indigenous market on one hand and to make a place in the international market on the other. Although, very few manufacturing organization do meet the global market requirements. But there is still lot of efforts to be taken for world class competition. An attempt has been made in this paper to develop a conceptual model taking in to account the three parameters such as, Direct, Indirect and Administrative AMTs. This research work further attempts to present an empirical data analysis conducted in the manufacturing enterprises in province of Sindh, Pakistan. The overall indigenous progress of manufacturing enterprises as according to the data collected from 60 companies reveals that the AMTs systems are partially understood and practiced that is also one of the cause towards slow progress of national exchequer.

  6. Cloud Manufacturing Service Paradigm for Group Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Jingtao Zhou

    2014-07-01

    Full Text Available The continuous refinement of specialization requires that the group manufacturing company must be constantly focused on how to concentrate its core resources in special sphere to form its core competitive advantage. However, the resources in enterprise group are usually distributed in different subsidiary companies, which means they cannot be fully used, constraining the competition and development of the enterprise. Conducted as a response to a need for cloud manufacturing studies, systematic and detailed studies on cloud manufacturing schema for group companies are carried out in this paper. A new hybrid private clouds paradigm is proposed to meet the requirements of aggregation and centralized use of heterogeneous resources and business units distributed in different subsidiary companies. After the introduction of the cloud manufacturing paradigm for enterprise group and its architecture, this paper presents a derivation from the abstraction of paradigm and framework to the application of a practical evaluative working mechanism. In short, the paradigm establishes an effective working mechanism to translate collaborative business process composed by the activities into cloud manufacturing process composed by services so as to create a foundation resulting in mature traditional project monitoring and scheduling technologies being able to be used in cloud manufacturing project management.

  7. Foundations & principles of distributed manufacturing elements of manufacturing networks, cyber-physical production systems and smart automation

    CERN Document Server

    Kühnle, Hermann

    2015-01-01

    The book presents a coherent description of distributed manufacturing, providing a solid base for further research on the subject as well as smart implementations in companies. It provides a guide for those researching and working in a range of fields, such as smart manufacturing, cloud computing, RFID tracking, distributed automation, cyber physical production and global design anywhere, manufacture anywhere solutions. Foundations & Principles of Distributed Manufacturing anticipates future advances in the fields of embedded systems, the Internet of Things and cyber physical systems, outlining how adopting these innovations could rapidly bring about improvements in key performance indicators, which could in turn generate competition pressure by rendering successful business models obsolete. In laying the groundwork for powerful theoretical models, high standards for the homogeneity and soundness of the suggested setups are applied. The book especially elaborates on the upcoming competition in online manu...

  8. Using Innovative Technologies for Manufacturing Rocket Engine Hardware

    Science.gov (United States)

    Betts, E. M.; Eddleman, D. E.; Reynolds, D. C.; Hardin, N. A.

    2011-01-01

    Many of the manufacturing techniques that are currently used for rocket engine component production are traditional methods that have been proven through years of experience and historical precedence. As the United States enters into the next space age where new launch vehicles are being designed and propulsion systems are being improved upon, it is sometimes necessary to adopt innovative techniques for manufacturing hardware. With a heavy emphasis on cost reduction and improvements in manufacturing time, rapid manufacturing techniques such as Direct Metal Laser Sintering (DMLS) are being adopted and evaluated for their use on NASA s Space Launch System (SLS) upper stage engine, J-2X, with hopes of employing this technology on a wide variety of future projects. DMLS has the potential to significantly reduce the processing time and cost of engine hardware, while achieving desirable material properties by using a layered powder metal manufacturing process in order to produce complex part geometries. Marshall Space Flight Center (MSFC) has recently hot-fire tested a J-2X gas generator (GG) discharge duct that was manufactured using DMLS. The duct was inspected and proof tested prior to the hot-fire test. Using a workhorse gas generator (WHGG) test fixture at MSFC's East Test Area, the duct was subjected to extreme J-2X hot gas environments during 7 tests for a total of 537 seconds of hot-fire time. The duct underwent extensive post-test evaluation and showed no signs of degradation. DMLS manufacturing has proven to be a viable option for manufacturing rocket engine hardware, and further development and use of this manufacturing method is recommended.

  9. Using Innovative Techniques for Manufacturing Rocket Engine Hardware

    Science.gov (United States)

    Betts, Erin M.; Reynolds, David C.; Eddleman, David E.; Hardin, Andy

    2011-01-01

    Many of the manufacturing techniques that are currently used for rocket engine component production are traditional methods that have been proven through years of experience and historical precedence. As we enter into a new space age where new launch vehicles are being designed and propulsion systems are being improved upon, it is sometimes necessary to adopt new and innovative techniques for manufacturing hardware. With a heavy emphasis on cost reduction and improvements in manufacturing time, manufacturing techniques such as Direct Metal Laser Sintering (DMLS) are being adopted and evaluated for their use on J-2X, with hopes of employing this technology on a wide variety of future projects. DMLS has the potential to significantly reduce the processing time and cost of engine hardware, while achieving desirable material properties by using a layered powder metal manufacturing process in order to produce complex part geometries. Marshall Space Flight Center (MSFC) has recently hot-fire tested a J-2X gas generator discharge duct that was manufactured using DMLS. The duct was inspected and proof tested prior to the hot-fire test. Using the Workhorse Gas Generator (WHGG) test setup at MSFC?s East Test Area test stand 116, the duct was subject to extreme J-2X gas generator environments and endured a total of 538 seconds of hot-fire time. The duct survived the testing and was inspected after the test. DMLS manufacturing has proven to be a viable option for manufacturing rocket engine hardware, and further development and use of this manufacturing method is recommended.

  10. Many Manufactured Nanosats, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — To achieve the capability to affordably produce scores of nano-spacecraft for envisioned constellation missions, a new manufacturing process is needed to reduce the...

  11. Wood and Paper Manufacturing Sectors

    Science.gov (United States)

    Find EPA regulatory information for the wood product and paper manufacturing sectors, including paper, pulp and lumber. Information includes NESHAPs and effluent guidelines for pulp and paper rulemaking, and compliance guidelines

  12. Thin Slits Manufacturing Process Using Electro Discharge Technique

    Czech Academy of Sciences Publication Activity Database

    Hošek, Jan

    -, č. 40 (2011), s. 175-178 ISSN 1584-5982 R&D Projects: GA AV ČR IAA200760905 Institutional research plan: CEZ:AV0Z20760514 Keywords : thin slit * EDM process * manufacturing Subject RIV: JR - Other Machinery

  13. Guides to manufacturing and marketing charcoal in the Northeastern States

    Science.gov (United States)

    Fred C. Simmons

    1957-01-01

    Charcoal manufacture has become the subject of a tremendous new interest in the Northeast in the past few years. In many communities, retailers have been unable to find enough charcoal to fill the demands - even though in the same localities there are large supplies of surplus wood that could be used in making charcoal. As a result of this unfilled demand, we have...

  14. Fluid Mechanics Of Molten Metal Droplets In Additive Manufacturing

    Czech Academy of Sciences Publication Activity Database

    Tesař, Václav; Šonský, Jiří

    2016-01-01

    Roč. 4, č. 4 (2016), s. 403-412 ISSN 2046-0546 R&D Projects: GA ČR GA13-23046S Institutional support: RVO:61388998 Keywords : additive manufacturing * droplets * molten metal Subject RIV: BK - Fluid Dynamics http://www.witpress.com/elibrary/cmem-volumes/4/4/1545

  15. Solar collector manufacturing activity, 1990

    International Nuclear Information System (INIS)

    1992-01-01

    The Solar Collector Manufacturing Activity 1990 report prepared by the Energy Information Administration (EIA) presents summary and detailed data provided by domestic manufacturers on shipments of solar thermal collectors and photovoltaic cells and modules. Summary data on solar thermal collector shipments are presented for the period 1974 through 1990. Summary data on photovoltaic cell and module shipments are presented for the period 1982 through 1990. Detailed information for solar thermal collectors and photovoltaic cells and modules are presented for 1990

  16. Flexible automated manufacturing for SMEs

    DEFF Research Database (Denmark)

    Grube Hansen, David; Bilberg, Arne; Madsen, Erik Skov

    2017-01-01

    SMEs are in general highly flexible and agile in order to accommodate the customer demands in the paradigm of High Mix-Low Volume manufacturing. The flexibility and agility have mainly been enabled by manual labor, but as we are entering the technology and data driven fourth industrial revolution......, where augmented operators and machines work in cooperation in a highly flexible and productive manufacturing system both an opportunity and a need has raised for developing highly flexible and efficient automation....

  17. Whither North Carolina furniture manufacturing?

    OpenAIRE

    Robert L. Lacy

    2004-01-01

    North Carolina's furniture manufacturing industry has contracted in recent years as imports have gained a greater share of the domestic furniture market. Rapid growth of the furniture industry in China and a surge in exports from that country to the United States in particular have contributed to plant closings and consolidation of operations in the state. North Carolina's furniture manufacturers are adapting to the emergence of global competition and are developing new corporate strategies t...

  18. Crowd wisdom drives intelligent manufacturing

    Directory of Open Access Journals (Sweden)

    Jiaqi Lu

    2017-03-01

    Full Text Available Purpose – A fundamental problem for intelligent manufacturing is to equip the agents with the ability to automatically make judgments and decisions. This paper aims to introduce the basic principle for intelligent crowds in an attempt to show that crowd wisdom could help in making accurate judgments and proper decisions. This further shows the positive effects that crowd wisdom could bring to the entire manufacturing process. Design/methodology/approach – Efforts to support the critical role of crowd wisdom in intelligent manufacturing involve theoretical explanation, including a discussion of several prevailing concepts, such as consumer-to-business (C2B, crowdfunding and an interpretation of the contemporary Big Data mania. In addition, an empirical study with three business cases was conducted to prove the conclusion that our ideas could well explain the current business phenomena and guide the future of manufacturing. Findings – This paper shows that crowd wisdom could help make accurate judgments and proper decisions. It further shows the positive effects that crowd wisdom could bring to the entire manufacturing process. Originality/value – The paper highlights the importance of crowd wisdom in manufacturing with sufficient theoretical and empirical analysis, potentially providing a guideline for future industry.

  19. CT-assisted agile manufacturing

    Science.gov (United States)

    Stanley, James H.; Yancey, Robert N.

    1996-11-01

    The next century will witness at least two great revolutions in the way goods are produced. First, workers will use the medium of virtual reality in all aspects of marketing, research, development, prototyping, manufacturing, sales and service. Second, market forces will drive manufacturing towards small-lot production and just-in-time delivery. Already, we can discern the merging of these megatrends into what some are calling agile manufacturing. Under this new paradigm, parts and processes will be designed and engineered within the mind of a computer, tooled and manufactured by the offspring of today's rapid prototyping equipment, and evaluated for performance and reliability by advanced nondestructive evaluation (NDE) techniques and sophisticated computational models. Computed tomography (CT) is the premier example of an NDE method suitable for future agile manufacturing activities. It is the only modality that provides convenient access to the full suite of engineering data that users will need to avail themselves of computer- aided design, computer-aided manufacturing, and computer- aided engineering capabilities, as well as newly emerging reverse engineering, rapid prototyping and solid freeform fabrication technologies. As such, CT is assured a central, utilitarian role in future industrial operations. An overview of this exciting future for industrial CT is presented.

  20. Technology transfer and scale-up of the Flublok recombinant hemagglutinin (HA) influenza vaccine manufacturing process.

    Science.gov (United States)

    Buckland, Barry; Boulanger, Robert; Fino, Mireli; Srivastava, Indresh; Holtz, Kathy; Khramtsov, Nikolai; McPherson, Clifton; Meghrous, Jamal; Kubera, Paul; Cox, Manon M J

    2014-09-22

    Multiple different hemagglutinin (HA) protein antigens have been reproducibly manufactured at the 650L scale by Protein Sciences Corporation (PSC) based on an insect cell culture with baculovirus infection. Significantly, these HA protein antigens were produced by the same Universal Manufacturing process as described in the biological license application (BLA) for the first recombinant influenza vaccine approved by the FDA (Flublok). The technology is uniquely designed so that a change in vaccine composition can be readily accommodated from one HA protein antigen to another one. Here we present a vaccine candidate to combat the recently emerged H7N9 virus as an example starting with the genetic sequence for the required HA, creation of the baculovirus and ending with purified protein antigen (or vaccine component) at the 10L scale accomplished within 38 days under GMP conditions. The same process performance is being achieved at the 2L, 10L, 100L, 650L and 2500L scale. An illustration is given of how the technology was transferred from the benchmark 650L scale facility to a retrofitted microbial facility at the 2500L scale within 100 days which includes the time for facility engineering changes. The successful development, technology transfer and scale-up of the Flublok process has major implications for being ready to make vaccine rapidly on a worldwide scale as a defense against pandemic influenza. The technology described does not have the same vulnerability to mutations in the egg adapted strain, and resulting loss in vaccine efficacy, faced by egg based manufacture. Copyright © 2014 Elsevier Ltd. All rights reserved.

  1. Exploring manufacturing competencies of a two wheeler manufacturing unit

    Science.gov (United States)

    Deep Singh, Chandan; Singh Khamba, Jaimal; Singh, Rajdeep; Singh, Navdeep

    2014-07-01

    The two wheeler industry of India is one of the most dependable industries as every person has at least a two wheeler with him, if not any four wheeler. Earlier there were scooters like Bajaj Chetak, Priya but with evolution of motorcycles like splendor, splendor+, etc. the scooter market started declining but with arrival of gearless scooters like Honda Activa, Scooty Pep, etc. the market place has become increasingly competitive in recent time and industries are facing tough test of improving products and thus market share. The competitiveness among industries is an important issue. Competency development is a vital tool to enhance the competitiveness of industries. Based, on aggregate performance of a firm, it comprehensively explores the varying importance of manufacturing competencies and drives of industrial competitiveness. Hence by, exploring the manufacturing competencies of a two wheeler industry, one can reflect the competitiveness of two wheeler manufacturing industry as a whole. This study presents various factors of manufacturing competencies affecting industrial competitiveness as the significance of these competencies is increasing day by day in two wheeler manufacturing industry.

  2. Exploring manufacturing competencies of a two wheeler manufacturing unit

    International Nuclear Information System (INIS)

    Singh, Chandan Deep; Khamba, Jaimal Singh; Singh, Rajdeep; Singh, Navdeep

    2014-01-01

    The two wheeler industry of India is one of the most dependable industries as every person has at least a two wheeler with him, if not any four wheeler. Earlier there were scooters like Bajaj Chetak, Priya but with evolution of motorcycles like splendor, splendor+, etc. the scooter market started declining but with arrival of gearless scooters like Honda Activa, Scooty Pep, etc. the market place has become increasingly competitive in recent time and industries are facing tough test of improving products and thus market share. The competitiveness among industries is an important issue. Competency development is a vital tool to enhance the competitiveness of industries. Based, on aggregate performance of a firm, it comprehensively explores the varying importance of manufacturing competencies and drives of industrial competitiveness. Hence by, exploring the manufacturing competencies of a two wheeler industry, one can reflect the competitiveness of two wheeler manufacturing industry as a whole. This study presents various factors of manufacturing competencies affecting industrial competitiveness as the significance of these competencies is increasing day by day in two wheeler manufacturing industry

  3. Complete Sequence of p07-406, a 24,179-base-pair plasmid harboring the blaVIM-7 metallo-beta-lactamase gene in a Pseudomonas aeruginosa isolate from the United States.

    Science.gov (United States)

    Li, Hongyang; Toleman, Mark A; Bennett, Peter M; Jones, Ronald N; Walsh, Timothy R

    2008-09-01

    An outbreak involving a Pseudomonas aeruginosa strain that was resistant to all tested antimicrobials except polymyxin B occurred in a hospital in Houston, TX. Previous studies on this strain showed that it possesses a novel mobile metallo-beta-lactamase (MBL) gene, designated bla(VIM-7), located on a plasmid (p07-406). Here, we report the complete sequence, annotation, and functional characterization of this plasmid. p07-406 is 24,179 bp in length, and 29 open reading frames were identified related to known or putatively recognized proteins. Analysis of this plasmid showed it to be comprised of four distinct regions: (i) a region of 5,200 bp having a Tn501-like mercuric resistance (mer) transposon upstream of the replication region; (ii) a Tn3-like transposon carrying a truncated integron with a bla(VIM-7) gene and an insertion sequence inserted at the other end of this transposon; (iii) a region of four genes, upstream of the Tn3-like transposon, possessing very high similarity to plasmid pXcB from Xanthomonas campestris pv. citri commonly associated with plants; (iv) a backbone sequence similar to the backbone structure of the IncP group plasmid Rms149, pB10, and R751. This is the first plasmid to be sequenced carrying an MBL gene and highlights the amelioration of DNA segments from disparate origins, most noticeably from plant pathogens.

  4. Genetic and biochemical characterization of an acquired subgroup B3 metallo-β-lactamase gene, blaAIM-1, and its unique genetic context in Pseudomonas aeruginosa from Australia.

    Science.gov (United States)

    Yong, Dongeun; Toleman, Mark A; Bell, Jan; Ritchie, Brett; Pratt, Rachael; Ryley, Henry; Walsh, Timothy R

    2012-12-01

    Three clinical Pseudomonas aeruginosa isolates (WCH2677, WCH2813, and WCH2837) isolated from the Women's and Children's Hospital, Adelaide, Australia, produced a metallo-β-lactamase (MBL)-positive Etest result. All isolates were PCR negative for known MBL genes. A gene bank was created, and an MBL gene, designated bla(AIM-1), was cloned and fully characterized. The encoded enzyme, AIM-1, is a group B3 MBL that has the highest level of identity to THIN-B and L1. It is chromosomal and flanked by two copies (one intact and one truncated) of an ISCR element, ISCR15. Southern hybridization studies indicated the movement of both ISCR15 and bla(AIM-1) within the three different clinical isolates. AIM-1 hydrolyzes most β-lactams, with the exception of aztreonam and, to a lesser extent, ceftazidime; however, it possesses significantly higher k(cat) values for cefepime and carbapenems than most other MBLs. AIM-1 was the first mobile group B3 enzyme detected and signals further problems for already beleaguered antimicrobial regimes to treat serious P. aeruginosa and other Gram-negative infections.

  5. A subjective scheduler for subjective dedicated networks

    Science.gov (United States)

    Suherman; Fakhrizal, Said Reza; Al-Akaidi, Marwan

    2017-09-01

    Multiple access technique is one of important techniques within medium access layer in TCP/IP protocol stack. Each network technology implements the selected access method. Priority can be implemented in those methods to differentiate services. Some internet networks are dedicated for specific purpose. Education browsing or tutorial video accesses are preferred in a library hotspot, while entertainment and sport contents could be subjects of limitation. Current solution may use IP address filter or access list. This paper proposes subjective properties of users or applications are used for priority determination in multiple access techniques. The NS-2 simulator is employed to evaluate the method. A video surveillance network using WiMAX is chosen as the object. Subjective priority is implemented on WiMAX scheduler based on traffic properties. Three different traffic sources from monitoring video: palace, park, and market are evaluated. The proposed subjective scheduler prioritizes palace monitoring video that results better quality, xx dB than the later monitoring spots.

  6. 75 FR 51851 - Weather Shield Manufacturing, Inc., Corporate Office, Medford, WI; Notice of Revised...

    Science.gov (United States)

    2010-08-23

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-64,725] Weather Shield... (Department) for further review, Former Employees of Weather Shield Manufacturing, Inc. v. United States, Court No. 09-00377. On December 17, 2008, former workers of Weather Shield Manufacturing, Inc. (subject...

  7. 76 FR 70761 - Weather Shield Manufacturing, Inc. Corporate Office, Medford, WI; Notice of Negative...

    Science.gov (United States)

    2011-11-15

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,673] Weather Shield... Employees of Weather Shield Manufacturing, Inc. v. United States Secretary of Labor (Court No. 10-00299... former workers of Weather Shield Manufacturing, Inc., Corporate Office, Medford, Wisconsin (subject...

  8. 78 FR 775 - Weather Shield Manufacturing, Inc., Corporate Office, Medford, WI; Notice of Negative...

    Science.gov (United States)

    2013-01-04

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-72,673] Weather Shield... Labor (Department) to conduct further investigation in Former Employees of Weather Shield Manufacturing... former workers of the Weather Shield Manufacturing, Inc., Corporate Office, Medford, Wisconsin (subject...

  9. 76 FR 13664 - Elkay Manufacturing, Broadview, IL; Amended Certification Regarding Eligibility To Apply for...

    Science.gov (United States)

    2011-03-14

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-75,147] Elkay Manufacturing..., 2011, applicable to workers of Elkay Manufacturing, Broadview, Illinois. The notice will be published... certification for workers of the subject firm. The workers are engaged in the production of stainless steel...

  10. Canadian Manufacturing Malaise: Three Hypotheses

    Directory of Open Access Journals (Sweden)

    Matt Krzepkowski

    2013-03-01

    Full Text Available The danger in politicians promoting the idea that “Dutch Disease” is responsible for the decline of the Ontario manufacturing sector is that the suggestion implies that Canada’s manufacturing sector will bounce back if only we could slow down oil sands development, or if the Canadian dollar were to devalue. In reality, evidence suggests that the decline in Ontario manufacturing is the result of long-term structural changes in the economy, independent of the rise of the country’s natural-resource sector and the rising dollar. And the sooner policymakers realize that, and stop blaming the decline in manufacturing on Dutch Disease (which holds that a booming natural-resource sector that drives up our dollar makes our manufacturing exports less competitive the sooner they can get to work on helping manufacturing-dependent regions transition to the evolving economy. A closer analysis of Canada’s manufacturing sector shows that jobs in that sector have been disappearing across the country since the end of the Second World War, with the sector’s share of employment falling dramatically well before rapid development began to take hold in the oil sands, and back when Canada’s dollar was still worth far less than the American dollar. It is a trend that has been occurring among most of our OECD peers, including the United States, which may be due to the widespread reallocation of production to lower cost countries. But it is also true that Canada’s manufacturing productivity performance in particular has been declining for a generation, with especially poor performance in the last decade, when labour productivity in Canada grew at just a quarter of the U.S. rate. Meanwhile, capital investment that may have improved the competitiveness of Canadian manufacturing has been anemic. Yet there is no particular reason to lament the scaling-down of manufacturing jobs in Ontario. The province remains just as economically important, as a share of

  11. Technological dispute for manufacturing population

    Directory of Open Access Journals (Sweden)

    B.M. Hevko

    2017-12-01

    Full Text Available New designs of technological equipment are presented – a variegated unit for adjusting the machine for precise manufacturing of a cut or on a tool of a tester, or on a workpiece, and also a design of a control device for measuring average diameters of taps. An important element in the manufacture of cutting tools is the manufacture of appropriate technological equipment. So for the manufacture of taps, it is necessary to develop the design of technological equipment for the adjustment of the necessary design parameters, as well as the design of control devices for their parameters. To provide these operations to instruments are the requirements of accuracy, productivity, stability, cost of production and a number of others. The new design of the technological equipment for the adjustment of the machine for precise manufacturing of the cutting is presented. The design of the control device for measuring the average diameter of the taps is also given. The advantages of the device include improving the quality of processing and working out the design on the technological.

  12. Additive manufacturing in maxillofacial reconstruction

    Directory of Open Access Journals (Sweden)

    Dincă Luciana Laura

    2017-01-01

    Full Text Available In this paper the benefits of using additive manufacturing technologies in maxillofacial reconstruction are highlighted. Based on a real clinical case, the paper describes the manufacture of an implant prototype replacing the right zygomatic bone and a part of maxilla using additive manufacturing technologies. The face is the most expressive part of the human body that makes us unique. It was shown that the maxillofacial prostheses help to improve the psychological state of patients affected by, because low self esteem feeling appears commonly to this patients with the facial defects. The aim of this paper is to show how using additive manufacturing technologies methods within this research, the producing a surgical model will help surgeon to improve the pre-operative planning. For this we used additive manufacturing technologies such as Stereolitography to achieve the biomodel and FDM-fused deposition modelling to obtain a prototype model because these technologies make it possible to obtain prosthesis according to the physical and mechanical requirements of the region of implantation.

  13. Microstructures of iron aluminides processed by additive layer manufacturing and spark plasma sintering

    Czech Academy of Sciences Publication Activity Database

    Michalcová, A.; Palm, M.; Senceková, L.; Rolink, G.; Weisheit, A.; Kubatík, Tomáš František

    2015-01-01

    Roč. 15, č. 4 (2015), s. 610-614 ISSN 1213-2489 Institutional support: RVO:61389021 Keywords : Intermetallics * Laser additive manufacturing * Powder metal lurgy Subject RIV: JK - Corrosion ; Surface Treatment of Materials

  14. Metrology for Fuel Cell Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Stocker, Michael [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Stanfield, Eric [National Inst. of Standards and Technology, Gaithersburg, MD (United States)

    2015-02-04

    The project was divided into three subprojects. The first subproject is Fuel Cell Manufacturing Variability and Its Impact on Performance. The objective was to determine if flow field channel dimensional variability has an impact on fuel cell performance. The second subproject is Non-contact Sensor Evaluation for Bipolar Plate Manufacturing Process Control and Smart Assembly of Fuel Cell Stacks. The objective was to enable cost reduction in the manufacture of fuel cell plates by providing a rapid non-contact measurement system for in-line process control. The third subproject is Optical Scatterfield Metrology for Online Catalyst Coating Inspection of PEM Soft Goods. The objective was to evaluate the suitability of Optical Scatterfield Microscopy as a viable measurement tool for in situ process control of catalyst coatings.

  15. Asbestos manufacturing plants in Poland

    Directory of Open Access Journals (Sweden)

    Wilk Ewa

    2014-06-01

    Full Text Available The unique set of physical and chemical properties of asbestos has led to its many industrial applications, such as roof coverings, textiles, rope, cord and yarn, paper, friction and composition materials, household product, acid-resistant filters, packing, insulation, and certain types of lagging, amongst others. In Poland asbestos-containing products were manufactured from raw materials imported mainly from the former Soviet Union, with production launched at the beginning of 20th century. According to Annex 4 to the Act of 19 June 1997 on the prohibition of the use of asbestos-containing products, there were 28 asbestos manufacturing plants in Poland located in 11 provinces throughout the country. The current survey was undertaken to enable asbestos manufacturing plants to be arranged, described and divided in order to contribute to further surveys.

  16. Energy Efficiency in Manufacturing Systems

    CERN Document Server

    Thiede, Sebastian

    2012-01-01

    Energy consumption is of great interest to manufacturing companies. Beyond considering individual processes and machines, the perspective on process chains and factories as a whole holds major potentials for energy efficiency improvements. To exploit these potentials, dynamic interactions of different processes as well as auxiliary equipment (e.g. compressed air generation) need to be taken into account. In addition, planning and controlling manufacturing systems require  balancing technical, economic and environmental objectives. Therefore, an innovative and comprehensive methodology – with a generic energy flow-oriented manufacturing simulation environment as a core element – is developed and embedded into a step-by-step application cycle. The concept is applied in its entirety to a wide range of case studies such as aluminium die casting, weaving mills, and printed circuit board assembly in order to demonstrate the broad applicability and the benefits that can be achieved.

  17. JIT Manufacturing: A Survey of Implementations in Small and Large U.S. Manufacturers

    OpenAIRE

    Richard E. White; John N. Pearson; Jeffrey R. Wilson

    1999-01-01

    Since the early 1980s, the diffusion of Just-In-Time (JIT) manufacturing from Japanese manufacturers to U.S. manufacturers has progressed at an accelerated rate. At this stage of the diffusion process, JIT implementations are more common and more advanced in large U.S. manufacturers than in small; consequently, U.S. businessmen's understanding of issues associated with JIT implementations in large manufacturers is more developed than that of small manufacturers. When small manufacturers repre...

  18. Measure of manufacturing performance in advanced manufacturing systems

    NARCIS (Netherlands)

    Ron, de A.J.

    1995-01-01

    Because of the financial risks as a result of the high investments, decisions concerning investing in advanced manufacturing systems are difficult. The difficulty to decide is gained by the lack of a well-defined measure to support decisions and alarming messages from the industry concerning inverse

  19. The manufacturing blueprint environment : Bringing intelligence into manufacturing

    NARCIS (Netherlands)

    Papazoglou, Mike; Elgammal, Amal

    Manufacturers today are rapidly moving into a business climate that is characterized by the ability to fulfill orders on demand by doing business through short-term networks where they negotiate value-adding processes dynamically – taking into account quality, time, price, viability, sustainability,

  20. Introduction to semiconductor manufacturing technology

    CERN Document Server

    2012-01-01

    IC chip manufacturing processes, such as photolithography, etch, CVD, PVD, CMP, ion implantation, RTP, inspection, and metrology, are complex methods that draw upon many disciplines. [i]Introduction to Semiconductor Manufacturing Technologies, Second Edition[/i] thoroughly describes the complicated processes with minimal mathematics, chemistry, and physics; it covers advanced concepts while keeping the contents accessible to readers without advanced degrees. Designed as a textbook for college students, this book provides a realistic picture of the semiconductor industry and an in-depth discuss

  1. Strategi Bersaing dengan Agile Manufacturing

    Directory of Open Access Journals (Sweden)

    Hamidah Tussifah

    2017-06-01

    Full Text Available Competitive advantage now increasingly rests upon a dynamic capability to compete successfully in an environment of frequent, challenging and unpredictable change. The agile manufacturing a recently popularized concept has been advocated as the 21st century manufacturing paradigm. In adopting and developing the key elements of agile manufactruring, there is requirement for enterprises to overcome the philosophical challenges of a shift from mass/lean production to the customization of agility. Beside that, enterprises should explore the key success factors to support succesfull agile implementation.

  2. Japan's technology and manufacturing infrastructure

    Science.gov (United States)

    Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

    1995-02-01

    The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

  3. Carbon-On-Carbon Manufacturing

    Science.gov (United States)

    Mungas, Gregory S. (Inventor); Buchanan, Larry (Inventor); Banzon, Jr., Jose T. (Inventor)

    2017-01-01

    The presently disclosed technology relates to carbon-on-carbon (C/C) manufacturing techniques and the resulting C/C products. One aspect of the manufacturing techniques disclosed herein utilizes two distinct curing operations that occur at different times and/or using different temperatures. The resulting C/C products are substantially non-porous, even though the curing operation(s) substantially gasify a liquid carbon-entrained filler material that saturates a carbon fabric that makes up the C/C products.

  4. Advanced optical manufacturing digital integrated system

    Science.gov (United States)

    Tao, Yizheng; Li, Xinglan; Li, Wei; Tang, Dingyong

    2012-10-01

    It is necessarily to adapt development of advanced optical manufacturing technology with modern science technology development. To solved these problems which low of ration, ratio of finished product, repetition, consistent in big size and high precision in advanced optical component manufacturing. Applied business driven and method of Rational Unified Process, this paper has researched advanced optical manufacturing process flow, requirement of Advanced Optical Manufacturing integrated System, and put forward architecture and key technology of it. Designed Optical component core and Manufacturing process driven of Advanced Optical Manufacturing Digital Integrated System. the result displayed effective well, realized dynamic planning Manufacturing process, information integration improved ratio of production manufactory.

  5. Benchmarks of Global Clean Energy Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Sandor, Debra [National Renewable Energy Lab. (NREL), Golden, CO (United States); Chung, Donald [National Renewable Energy Lab. (NREL), Golden, CO (United States); Keyser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Mann, Margaret [National Renewable Energy Lab. (NREL), Golden, CO (United States); Engel-Cox, Jill [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-01-01

    The Clean Energy Manufacturing Analysis Center (CEMAC), sponsored by the U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE), provides objective analysis and up-to-date data on global supply chains and manufacturing of clean energy technologies. Benchmarks of Global Clean Energy Manufacturing sheds light on several fundamental questions about the global clean technology manufacturing enterprise: How does clean energy technology manufacturing impact national economies? What are the economic opportunities across the manufacturing supply chain? What are the global dynamics of clean energy technology manufacturing?

  6. Chromosomal location of the fosA3 and blaCTX-M genes in Proteus mirabilis and clonal spread of Escherichia coli ST117 carrying fosA3-positive IncHI2/ST3 or F2:A-:B- plasmids in a chicken farm.

    Science.gov (United States)

    He, Dandan; Liu, Lanping; Guo, Baowei; Wu, Shengjun; Chen, Xiaojie; Wang, Jing; Zeng, Zhenling; Liu, Jian-Hua

    2017-04-01

    The aim of this study was to investigate the spread and location of the fosA3 gene among Enterobacteriaceae from diseased broiler chickens. Twenty-nine Escherichia coli and seven Proteus mirabilis isolates recovered from one chicken farm were screened for the presence of plasmid-mediated fosfomycin resistance genes by PCR. The clonal relatedness of fosA3-positive isolates, the transferability and location of fosA3, and the genetic context of the fosA3 gene were determined. Seven P. mirabilis isolates with three different pulsed-field gel electrophoresis (PFGE) patterns and five E. coli isolates belonging to sequence type 117 (ST117) and phylogenetic group D were positive for fosA3 and all carried the bla CTX-M gene. In E. coli, the genetic structures IS26-ISEcp1-bla CTX-M-65 -IS26-fosA3-1758 bp-IS26 and IS26-ISEcp1-bla CTX-M-3 -bla TEM-1 -IS26-fosA3-1758 bp-IS26 were present on transferable IncHI2/ST3 and F2:A-:B- plasmids, respectively. However, fosA3 was located on the chromosome of the seven P. mirabilis isolates. IS26-ISEcp1-bla CTX-M-65 -IS26-fosA3-1758 bp-IS26 and IS26-bla CTX-M-14 -611 bp-fosA3-1222 bp-IS26 were detected in three and four P. mirabilis isolates, respectively. Minicircles that contained both fosA3 and bla CTX-M-65 were shared between E. coli and P. mirabilis. This is the first report of the fosA3 gene integrated into the chromosome of P. mirabilis isolates with the bla CTX-M gene. The emergence and clonal spread of avian pathogenic E. coli ST117 with the feature of multidrug resistance and high virulence are a serious problem. Copyright © 2017 Elsevier B.V. and International Society of Chemotherapy. All rights reserved.

  7. Pellet to Part Manufacturing System for CNCs

    Energy Technology Data Exchange (ETDEWEB)

    Roschli, Alex C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Love, Lonnie J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Post, Brian K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chesser, Phillip C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lloyd, Peter D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bandari, Yashwanth Kumar [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Jones, Jason [Hybrid Manufacturing Technologies, Swadlincote (United Kingdom); Gaul, Katherine T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2018-03-14

    Oak Ridge National Laboratory’s Manufacturing Demonstration Facility worked with Hybrid Manufacturing Technologies to develop a compact prototype composite additive manufacturing head that can effectively extrude injection molding pellets. The head interfaces with conventional CNC machine tools enabling rapid conversion of conventional machine tools to additive manufacturing tools. The intent was to enable wider adoption of Big Area Additive Manufacturing (BAAM) technology and combine BAAM technology with conventional machining systems.

  8. Manual for subject analysis

    International Nuclear Information System (INIS)

    2002-01-01

    This document is one in a series of publications known as the ETDE/INIS Joint Reference Series and also constitutes a part of the ETDE Procedures Manual. It presents the rules, guidelines and procedures to be adopted by centers submitting input to the International Nuclear Information System (INIS) or the Energy Technology Data Exchange (ETDE). It is a manual for the subject analysis part of input preparation, meaning the selection, subject classification, abstracting and subject indexing of relevant publications, and is to be used in conjunction with the Thesauruses, Subject Categories documents and the documents providing guidelines for the preparation of abstracts. The concept and structure of the new manual are intended to describe in a logical and efficient sequence all the steps comprising the subject analysis of documents to be reported to INIS or ETDE. The manual includes new chapters on preparatory analysis, subject classification, abstracting and subject indexing, as well as rules, guidelines, procedures, examples and a special chapter on guidelines and examples for subject analysis in particular subject fields. (g.t.; a.n.)

  9. Estimating Subjective Probabilities

    DEFF Research Database (Denmark)

    Andersen, Steffen; Fountain, John; Harrison, Glenn W.

    2014-01-01

    either construct elicitation mechanisms that control for risk aversion, or construct elicitation mechanisms which undertake 'calibrating adjustments' to elicited reports. We illustrate how the joint estimation of risk attitudes and subjective probabilities can provide the calibration adjustments...... that theory calls for. We illustrate this approach using data from a controlled experiment with real monetary consequences to the subjects. This allows the observer to make inferences about the latent subjective probability, under virtually any well-specified model of choice under subjective risk, while still...

  10. Nano Manufacturing - Products and Technologies

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; Alting, Leo

    2004-01-01

    The use of micro and nano technologies in components and products not only sets new demands to the manufacturing technologies. Product concepts have to be rethought and redefined in order to implement the micro and nano technologies into functional systems. Both a technology driven and a product ...

  11. Josiah Wedgwood, Manufacturing and Craft

    DEFF Research Database (Denmark)

    Holt, Robin; Popp, Andrew

    2016-01-01

    Craft and industrial manufacture are often seen as dichotomous, with craft being marginalized during the process of industrialization. We want to look beyond this position, searching for craft in places where it has gone unnoticed and where it might have bloomed anew in the interstices created...

  12. Manufacturer Usage Description Specification Implementation

    OpenAIRE

    Srinivasan, Kaushik

    2017-01-01

    Manufacturer Usage Description Specification (MUDS) is aframework under RFC development that aims to automate Internet access control rules for IoT devices . These access controls prevent malicious IoT devices from attacking other devices and also protect the IoT devices from being attacked by other devices.We are implementing this framework and trying to improve its security.

  13. Fuel manufacture and quality control

    International Nuclear Information System (INIS)

    Roepenack, H.; Raab, K.

    1975-01-01

    The different steps in fuel and fuel element manufacturing from the conversion of UF 6 to UO 2 to the assembling of the whole fuel element are shortly described. Each of this fabrication steps must satisfy well-defined quality criteria which are checked in certain analyses or tests. (RB) [de

  14. Acylinder and freeform optical manufacturing

    Science.gov (United States)

    Fess, Edward; Wolfs, Frank; DeFisher, Scott; Ross, James

    2015-10-01

    Aspheric cylinders have the ability to improve optical performance over standard cylindrical surfaces. Over the last several years there has also been development into the application and functionality of utilizing freeform surfaces to improve optical performance. Freeforms have the ability to not only improve image quality over a greater field of view, but can open up the design space of an optical system making it more compact. Freeform geometries, much like aspheric cylinders, may not have an axis of rotation to spin the optic about during manufacturing. This leads to costly fabrication processes and custom metrology set ups, which may inhibit their use. Over the last several years, OptiPro Systems has developed and optimized our eSX grinding, UFF and USF polishing, UltraSurf metrology, and ProSurf software programming technologies to make the processing of these complex geometries much easier and deterministic. In this paper we will discuss the challenges associated with manufacturing complex shapes like aspheric cylinders as well as freeform geometries, and how several technologies working together can overcome them. The technologies focus on metrology feedback to a grinding and polishing machine that is controlled through an iterative computer aided manufacturing software system. We will also present examples of these hard to manufacture shapes with results.

  15. 77 FR 56811 - Manufacturing Council

    Science.gov (United States)

    2012-09-14

    ... consideration for appointment must be received by the Office of Advisory Committees by close of business on... of responsibility) that are leaders within their local manufacturing communities and industry sectors... Subcommittee. The purpose of this subcommittee will be to examine factors that impact the long-term strategic...

  16. Manufacturing in the knowledge economy

    DEFF Research Database (Denmark)

    Hansen, Teis; Winther, Lars

    2015-01-01

    and export. However, the character and activities of these industries are profoundly changing as they become increasingly knowledge intensive. Thus, innovation processes and knowledge production in manufacturing are much more complex than suggested by the classic division into high-, medium-and low...

  17. Aggregate modeling of manufacturing systems

    NARCIS (Netherlands)

    Lefeber, A.A.J.; Armbruster, H.D.; Kempf, K.G.; Keskinocak, P.; Uzsoy, R.

    2011-01-01

    In this chapter we will present three approaches to model manufacturing systems in an aggregate way leading to fast and effective (i.e., scalable) simulations that allow the development of simulation tools for rapid exploration of different production scenarios in a factory as well as in a whole

  18. Sustainability Characterization for Additive Manufacturing.

    Science.gov (United States)

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.

  19. Credit demand in Mozambican manufacturing

    DEFF Research Database (Denmark)

    Byiers, Bruce; Rand, John; Tarp, Finn

    2010-01-01

    This paper uses two industrial firm surveys to identify the key determinants of credit demand in Mozambican manufacturing. We construct five different measures of being credit constrained and estimate desired debt demand. Besides firm size and ownership structure, we find evidence that general...

  20. Quality assurance in tube manufacture

    International Nuclear Information System (INIS)

    Depken, H.

    1976-01-01

    Reliability in service essential for many high-technology products fabricated today. This is particularly the case within the nuclear industry. Here defective materials or components may have diastrous consequences to the safety of human beings and the environment. A new concept - Quality Assurance - originates from this industry. The concept implies that all contractors, fabricators and material manufactures involved must prove that the quality control system used, fulfits particular requirements at all manufacturing, inspection and testing stages. These requirement are laid down in two standards issued by the U.S. Atomic Energy Commission and the American Society of Mechanical Engineers. These standards are discussed in the paper. As a manufacturer of steel products for nuclear applications Sandvik has been forced to establish a quality assurance system according to these principles. The Sandvik approach is briefly described with regard to organisation and other major quality assurance activities. Further the education and training of operators and technicians is touched upon. Finally some viewpoints regarding audits performed by customers of steel manufacturers are expressed. (author)

  1. Typology of customer driven manufacturing

    NARCIS (Netherlands)

    Wortmann, J.C.; Wortmann, J.C.; Muntslag, D.R.; Timmermans, P.J.M.

    1997-01-01

    The aim of this chapter has been to introduce a variety of customer driven manufacturing situations. This variety has been placed in a two-dimensional grid, which constitutes a typology. For some of these types, production management issues were discussed in section 6.3. It was concluded that an

  2. 77 FR 66179 - Manufacturing Council

    Science.gov (United States)

    2012-11-02

    ... herein for convenience. Members will be selected in accordance with applicable Department of Commerce... this ability, the Department will consider such factors as, but not limited to, the candidate's proven experience in promoting, developing and marketing programs in support of manufacturing industries, job...

  3. CNC Preparation Meets Manufacturing Opportunity

    Science.gov (United States)

    Cassola, Joel

    2006-01-01

    This article features the machining technology program at Cape Fear Community College (CFCC) of Wilmington, North Carolina. North Carolina's Cape Fear Community College is working to meet diverse industry needs through its CNC training. The school's program has gained the attention of the local manufacturing community and students when it shifted…

  4. Hydrogen manufacturing using plasma reformers

    Energy Technology Data Exchange (ETDEWEB)

    Bromberg, L.; Cohn, D.R.; Rabinovich, A.; Hochgreb, S.; O`Brien, C. [Massachusetts Institute of Technology, Cambridge, MA (United States)

    1996-10-01

    Manufacturing of hydrogen from hydrocarbon fuels is needed for a variety of applications. These applications include fuel cells used in stationary electric power production and in vehicular propulsion. Hydrogen can also be used for various combustion engine systems. There is a wide range of requirements on the capacity of the hydrogen manufacturing system, the purity of the hydrogen fuel, and capability for rapid response. The overall objectives of a hydrogen manufacturing facility are to operate with high availability at the lowest possible cost and to have minimal adverse environmental impact. Plasma technology has potential to significantly alleviate shortcomings of conventional means of manufacturing hydrogen. These shortcomings include cost and deterioration of catalysts; limitations on hydrogen production from heavy hydrocarbons; limitations on rapid response; and size and weight requirements. In addition, use of plasma technology could provide for a greater variety of operating modes; in particular the possibility of virtual elimination of CO{sub 2} production by pyrolytic operation. This mode of hydrogen production may be of increasing importance due to recent additional evidence of global warming.

  5. Additively manufactured porous tantalum implants

    NARCIS (Netherlands)

    Wauthle, Ruben; Van Der Stok, Johan; Yavari, Saber Amin; Van Humbeeck, Jan; Kruth, Jean Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-01-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of

  6. UK manufacturers construction joint venture

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    This report examines the legal and commercial framework for UK manufacturers to collaborate in a construction venture for a small combustion/steam cycle power plant fueled with biomass. The integration of technology and project plan, the working capital and capitalisation, financial aspects, the market plan, turnkey packages, joint venture entities, and collaboration are discussed. (UK)

  7. Aggregate modeling of manufacturing systems

    NARCIS (Netherlands)

    Lefeber, A.A.J.; Armbruster, H.D.

    2007-01-01

    In this report we will present three approaches to model manufacturing systems in an aggregate way leading to fast and effective (i.e., scalable) simulations that allow the development of simulation tools for rapid exploration of different production scenarios in a factory as well as in a whole

  8. 77 FR 38269 - Approval for Expanded Manufacturing Authority; Foreign-Trade Subzone 7M; Amgen Manufacturing...

    Science.gov (United States)

    2012-06-27

    ... Manufacturing Authority; Foreign-Trade Subzone 7M; Amgen Manufacturing Limited (Biotechnology and Healthcare... the scope of manufacturing authority on behalf of Amgen Manufacturing Limited (Amgen), within Subzone..., the Board hereby orders: The application to expand the scope of manufacturing authority under zone...

  9. Improved Methods for Production Manufacturing Processes in Environmentally Benign Manufacturing

    Directory of Open Access Journals (Sweden)

    Yan-Yan Wang

    2011-09-01

    Full Text Available How to design a production process with low carbon emissions and low environmental impact as well as high manufacturing performance is a key factor in the success of low-carbon production. It is important to address concerns about climate change for the large carbon emission source manufacturing industries because of their high energy consumption and environmental impact during the manufacturing stage of the production life cycle. In this paper, methodology for determining a production process is developed. This methodology integrates process determination from three different levels: new production processing, selected production processing and batch production processing. This approach is taken within a manufacturing enterprise based on prior research. The methodology is aimed at providing decision support for implementing Environmentally Benign Manufacturing (EBM and low-carbon production to improve the environmental performance of the manufacturing industry. At the first level, a decision-making model for new production processes based on the Genetic Simulated Annealing Algorithm (GSAA is presented. The decision-making model considers not only the traditional factors, such as time, quality and cost, but also energy and resource consumption and environmental impact, which are different from the traditional methods. At the second level, a methodology is developed based on an IPO (Input-Process-Output model that integrates assessments of resource consumption and environmental impact in terms of a materials balance principle for batch production processes. At the third level, based on the above two levels, a method for determining production processes that focus on low-carbon production is developed based on case-based reasoning, expert systems and feature technology for designing the process flow of a new component. Through the above three levels, a method for determining the production process to identify, quantify, assess, and optimize the

  10. Subjective poverty line definitions

    NARCIS (Netherlands)

    J. Flik; B.M.S. van Praag (Bernard)

    1991-01-01

    textabstractIn this paper we will deal with definitions of subjective poverty lines. To measure a poverty threshold value in terms of household income, which separates the poor from the non-poor, we take into account the opinions of all people in society. Three subjective methods will be discussed

  11. Lean manufacturing in Indian context: A survey

    Directory of Open Access Journals (Sweden)

    Rakesh Kumar

    2015-04-01

    Full Text Available This paper is an attempt to examine the implementation of Lean Manufacturing system in the Indian industries. Predominant elements of Lean Manufacturing, benefits gained after its implementation and obstacles observed by Indian Industry have been recognized. The results of this survey support the opinion that Lean Manufacturing had potential to improve the organizational performance of Indian industries. Nevertheless, Indian industries are required to be passionate to transform their manufacturing by adopting Lean manufacturing to gain the full benefits. A large numbers of literature papers are available on the better side of Lean manufacturing approach and its benefits gained by manufacturing organizations after implementation. But the adverse impacts of Lean manufacturing are not discussed to a great extent. Some drawbacks of Lean manufacturing are also highlighted in this paper.

  12. Advance Manufacturing Office FY 2017 Budget At-A-Glance

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-03-01

    The Advanced Manufacturing Office (AMO) brings together manufacturers, research institutions, suppliers, and universities to investigate manufacturing processes, information, and materials technologies critical to advance domestic manufacturing of clean energy products, and to support energy productivity across the entire manufacturing sector.

  13. Good manufacturing practices of artisanal products in Northeastern Brazil

    Directory of Open Access Journals (Sweden)

    Medeiros, J.M.S.D

    2017-05-01

    Full Text Available This review provides an overview of the importance of good manufacturing practices in the elaboration of artisanal products, aiming to generate a discussion about this subject. The elaboration of artisanal food has been gaining prominence in several countries of the world since these products carry the identity and culture of a place. The traditional and artisanal way of manufacturing provides the food with a variation in its characteristics, which makes it peculiar in comparison to its similar, pleasing the most diverse demands of consumers. In addition, they are considered healthier and natural foods. In the Northeast of Brazil, these products are highlighted by the significant commercialization, being sources of income generation for the region. Among the most prominent products are the coalho and butter types cheeses, bottled butter and carne de sol. Despite the economic and cultural importance of these products, the traditional way of manufacturing, without proper hygiene care, can be a limiting factor for the formal commercialization of these products. Therefore, adopting good manufacturing practices at artisanal food processing places may be the first step towards the production of higher quality products that meet the requirements of the legislation but retain their artisanal manufacturing characteristics.

  14. Five-Axis Ultrasonic Additive Manufacturing for Nuclear Component Manufacture

    Science.gov (United States)

    Hehr, Adam; Wenning, Justin; Terrani, Kurt; Babu, Sudarsanam Suresh; Norfolk, Mark

    2017-03-01

    Ultrasonic additive manufacturing (UAM) is a three-dimensional metal printing technology which uses high-frequency vibrations to scrub and weld together both similar and dissimilar metal foils. There is no melting in the process and no special atmosphere requirements are needed. Consequently, dissimilar metals can be joined with little to no intermetallic compound formation, and large components can be manufactured. These attributes have the potential to transform manufacturing of nuclear reactor core components such as control elements for the High Flux Isotope Reactor at Oak Ridge National Laboratory. These components are hybrid structures consisting of an outer cladding layer in contact with the coolant with neutron-absorbing materials inside, such as neutron poisons for reactor control purposes. UAM systems are built into a computer numerical control (CNC) framework to utilize intermittent subtractive processes. These subtractive processes are used to introduce internal features as the component is being built and for net shaping. The CNC framework is also used for controlling the motion of the welding operation. It is demonstrated here that curved components with embedded features can be produced using a five-axis code for the welder for the first time.

  15. Manufacturing

    Directory of Open Access Journals (Sweden)

    Kovalenko Iaroslav

    2017-04-01

    Full Text Available This article describes a method of in-situ process monitoring in the digital light processing (DLP 3D printer. It is based on the continuous measurement of the adhesion force between printing surface and bottom of a liquid resin bath. This method is suitable only for the bottom-up DPL printers. Control system compares the force at the moment of unsticking of printed layer from the bottom of the tank, when it has the largest value in printing cycle, with theoretical value. Implementation of suggested algorithm can make detection of faults during the printing process possible.

  16. Modular mechatronic control of reconfigurable manufacturing system for mass customization manufacturing

    CSIR Research Space (South Africa)

    Xing, B

    2007-01-01

    Full Text Available Manufacturing companies are faced with the challenge of unpredictable, high frequency market changes in both local and international markets. There is a need for greater, more effective responsiveness by manufacturers to change their manufacturing...

  17. RUSSIAN LAW SUBJECTS

    Directory of Open Access Journals (Sweden)

    D.N. Bakhrakh

    2006-03-01

    Full Text Available The question about the subjects of law branches is concerning the number of most important and difficult in law science. Its right decision influences on the subject of law regulation, precise definition of addressees of law norms, the volume of their rights and duties, the limits of action of norms of Main part of the branch, its principles. Scientific investigations, dedicated to law subjects system, promote the development of recommendations for the legislative and law applying activity; they are needed for scientific work organization and student training, for preparing qualified lawyers.

  18. Writing and the 'Subject'

    DEFF Research Database (Denmark)

    Greve, Charlotte

    /page. It is, moreover, an index pointing to the painting/writing subject; it is a special deictic mode of painting/writing. The handwriting of the Russian avant-garde books, the poetics of handwriting, and the way handwriting is represented in poetry emphasize the way the subject (the speaking and the viewing...... in the early as well as the contemporary avant-garde, it becomes clear that the ‘subject’ is an unstable category that can be exposed to manipulation and play. Handwriting is performing as a signature (as an index), but is at the same time similar to the signature of a subject (an icon) and a verbal construct...

  19. Subject (of documents)

    DEFF Research Database (Denmark)

    Hjørland, Birger

    2017-01-01

    This article presents and discuss the concept “subject” or subject matter (of documents) as it has been examined in library and information science (LIS) for more than 100 years. Different theoretical positions are outlined and it is found that the most important distinction is between document......-oriented views versus request-oriented views. The document-oriented view conceive subject as something inherent in documents, whereas the request-oriented view (or the policy based view) understand subject as an attribution made to documents in order to facilitate certain uses of them. Related concepts...

  20. Safety in a Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Kopczewski Marian

    2017-02-01

    Full Text Available The safety systems include the functioning of the institutions of a state, central, and local government, businesses, and social organizations. Research in this discipline should contribute to the development of the theoretical foundations and systems of national and international security and operating systems in the area of technical safety. Technical safety engineering should deal with a design, build, operation, and decommissioning of technical measures in order to minimize the opportunities and the size of their negative impact on the environment, people, and the good of civilization. With this in mind, the main purpose of the research was to evaluate the safety of technical manufacturing company that uses a wide machine park. A plant manufacturing parts and components for automobiles was the audited company.

  1. Manufacturing Outsourcing A Knowledge Perspective

    CERN Document Server

    Rolstadås, Asbjørn; O'Sullivan, David

    2012-01-01

    All companies which reach a critical size are faced with outsourcing decisions that can increase the value of their products and services primarily through lower costs, greater reliability and improved efficiency. Successful outsourcing decisions have an important knowledge dimension, where the outsourcing professionals need to be supported by historical and contextual knowledge regarding their own products performance but also the performance of suppliers. Outsourcing in Manufacturing: the Knowledge Dimension explains in detail how a manager can acquire, create, transfer and use knowledge that optimizes their outsourcing decisions and improves the changes of marketplace success.              Outsourcing in Manufacturing: the Knowledge Dimension gives examples of the key decisions that needs to be taken by managers regarding effective outsourcing. Decisions are divided around the structural and infrastructural aspects of outsourcing and the key knowledge that needs to be managed to support good de...

  2. RESHORING IN MANUFACTURING AND SERVICES

    Directory of Open Access Journals (Sweden)

    Serghei MĂRGULESCU

    2014-05-01

    Full Text Available The extent of offshoring and outsourcing recorded in manufacturing and services in the last two decades has gradually eroded the advantage of the global arbitrage of labor costs. Along with other factors, this process began to change the options of international relocation of some companies that initially had adopted such a strategy, generating a reverse trend for returning in the country of origin of manufacturing and other activities. This process, called "reshoring," has recently started to gain some consistency. The trend is most notable in the sphere of production. In terms of business and IT services we cannot yet speak of a tangible start of the reshoring phenomenon, as it does in the sphere of production. Nevertheless we can see a slowdown in the offshoring of services and the emergence of new strategies in the field.

  3. The Frontiers of Additive Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Grote, Christopher John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-03-03

    Additive manufacturing, more commonly known as 3-D printing, has become a ubiquitous tool in science for its precise control over mechanical design. For additive manufacturing to work, a 3-D structure is split into thin 2D slices, and then different physical properties, such as photo-polymerization or melting, are used to grow the sequential layers. The level of control allows not only for devices to be made with a variety of materials: e.g. plastics, metals, and quantum dots, but to also have finely controlled structures leading to other novel properties. While 3-D printing is widely used by hobbyists for making models, it also has industrial applications in structural engineering, biological tissue scaffolding, customized electric circuitry, fuel cells, security, and more.

  4. The remembering subjectivity

    Directory of Open Access Journals (Sweden)

    María Angélica Garzón Martínez

    2015-07-01

    More concretely this article presents the idea of remembrance subjectivity that becomes converted into a political platform for reclaiming the right to recollect and change based on those recollections

  5. Nye oplysninger om bl.a. miljømæssig risikovurdering af PAT-protein og glufosinatammonium herbicider. Zea mays (Bt11). Supplerende materiale om Bt11. Modtaget 21-02-2005, deadline 29-03-2005, svar 07-03-2005

    DEFF Research Database (Denmark)

    Strandberg, Morten Tune

    2005-01-01

    Mail: Det tilsendte supplerende materiale om Bt-11 majsen (mail pr. 21-02-2005) omhandler bl.a. eventuelle uønskede konsekvenser ved ulovlig anvendelse af glufosinat ammonium herbicider i forbindelse med dyrkningen. Vi har allerede indraget dette aspekt i forbindelse med den økologiske risikovurd...

  6. Toward New-Generation Intelligent Manufacturing

    Directory of Open Access Journals (Sweden)

    Ji Zhou

    2018-02-01

    Full Text Available Intelligent manufacturing is a general concept that is under continuous development. It can be categorized into three basic paradigms: digital manufacturing, digital-networked manufacturing, and new-generation intelligent manufacturing. New-generation intelligent manufacturing represents an in-depth integration of new-generation artificial intelligence (AI technology and advanced manufacturing technology. It runs through every link in the full life-cycle of design, production, product, and service. The concept also relates to the optimization and integration of corresponding systems; the continuous improvement of enterprises’ product quality, performance, and service levels; and reduction in resources consumption. New-generation intelligent manufacturing acts as the core driving force of the new industrial revolution and will continue to be the main pathway for the transformation and upgrading of the manufacturing industry in the decades to come. Human-cyber-physical systems (HCPSs reveal the technological mechanisms of new-generation intelligent manufacturing and can effectively guide related theoretical research and engineering practice. Given the sequential development, cross interaction, and iterative upgrading characteristics of the three basic paradigms of intelligent manufacturing, a technology roadmap for “parallel promotion and integrated development” should be developed in order to drive forward the intelligent transformation of the manufacturing industry in China. Keywords: Advanced manufacturing, New-generation intelligent manufacturing, Human-cyber-physical system, New-generation AI, Basic paradigms, Parallel promotion, Integrated development

  7. Cyber Enabled Direct Digital Manufacturing

    Science.gov (United States)

    2015-05-15

    optimization of both clad height and dilution by varying travel speed, laser power and powder flow rate. Song et al. (2011) developed a two-input...Systems and Test Methodologies (F2921), Standard Specification for Additive Manufacturing Titanium -6 Aluminum-4 Vanadium with Powder Bed Fusion (F2924... Powder Nozzles</title> <creator>ARL at PSU</creator> 38 <description>Orientation of powder nozzles relative to substrate and laser beam.</description

  8. Exploring Danish Innovative Manufacturing Performance

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Christiansen, Thomas Bøhm

    2005-01-01

    The paper explores several dimensions of Danish industry’s innovative performance with respect to the paradigm of the fifth generation innovation model that was suggested by Rothwell [Int. Market. Rev. 11 (1994) 7]. These dimensions include a general status of innovativeness in Danish companies...... manufacturing companies demonstrate an innovative performance close to the fourth generation of innovation, which is slightly different than it is perceived publicly....

  9. Robotics and automation in manufacture

    International Nuclear Information System (INIS)

    Glasgow, J.R.

    1989-01-01

    NEI involvement in Heysham II and Torness included contracts for equipment both for the Nuclear Island and for non-nuclear associated plant. Fundamental to the approach to manufacture was the capital investment in plant and facilities to ensure the quality requirements were met with economic production methods and prompt delivery. Some of the production facilities for a selection of varied components are described. Examples of subsequent development of facilities are given to illustrate their current capability. (author)

  10. Reactive polymer fused deposition manufacturing

    Science.gov (United States)

    Kunc, Vlastimil; Rios, Orlando; Love, Lonnie J.; Duty, Chad E.; Johs, Alexander

    2017-05-16

    Methods and compositions for additive manufacturing that include reactive or thermosetting polymers, such as urethanes and epoxies. The polymers are melted, partially cross-linked prior to the depositing, deposited to form a component object, solidified, and fully cross-linked. These polymers form networks of chemical bonds that span the deposited layers. Application of a directional electromagnetic field can be applied to aromatic polymers after deposition to align the polymers for improved bonding between the deposited layers.

  11. QUALITY IN WORLD CLASS MANUFACTURING

    Directory of Open Access Journals (Sweden)

    Slavko Arsovski

    2011-12-01

    Full Text Available The World Class Manufacturing (WCM is a contemporary concept that is applied by the world leaders in the business. In this concept, one of the nine pillars is directly related to the quality and the other eight are related to it indirectly. That is why is very important to investigate relations between this concept and concept of model of quality. In the end of this paper are appointed the examples of best practice.

  12. Attracting young talents to manufacturing

    DEFF Research Database (Denmark)

    Perini, Stefano; Oliveira, Manuel; Costa, Joao

    2014-01-01

    In the last years, despite the global economic crisis, manufacturing is facing a serious difficulty in the recruitment of the brightest high-skilled human resources. National and international institutions have provided important guidelines to combat this skills mismatch and several innovations h...... with the Experiments, Interaction with real companies, Social networks, Challenges and making real products, Career management and skills orientation, are explained in detail with the support of examples of application...

  13. Robotics In Manufacturing: Army View

    Science.gov (United States)

    Michel, F. J.

    1983-05-01

    (Figure 1) This is an outline of my presentation today. The U. S. Army has a dual interest in the use of robots, namely: 1. As a substitute for or an extension of the soldier in the battlefield, and 2. in the factories that make Army materiel, or - as we call it -the the production base. The Production Base can again be divided into three separate segments, i.e., the Army owned and operated facilities or GOG6s, such as Rock Island and Watervliet arsenals, and not to be overlooked, the depot operations. There the Army manufactures gun tubes and other related parts for artillery weapons and repairs and overhauls them. A second category is the Army owned and contractor operated facilities or GOCOs,such as the ammunition plants, the tank plants at Lima, Ohio and Warren, Michigan and the Stratford Engine Plant in Connecticut where gas turbines for helicopter and the Abrams tank are manufactured. The last category covers the industrial base, that is those factories which are not only operated but also owned by the contractor himself also referred to as COCOs. You can see from this description that the Army is supported by a base which produces a diversified line of products. Therefore, the task of technology development and technology insertion is considerably more complex than what one encounters in the average U. S. Manufacturing organization.

  14. Human factors in agile manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Forsythe, C.

    1995-03-01

    As industries position themselves for the competitive markets of today, and the increasingly competitive global markets of the 21st century, agility, or the ability to rapidly develop and produce new products, represents a common trend. Agility manifests itself in many different forms, with the agile manufacturing paradigm proposed by the Iacocca Institute offering a generally accepted, long-term vision. In its many forms, common elements of agility or agile manufacturing include: changes in business, engineering and production practices, seamless information flow from design through production, integration of computer and information technologies into all facets of the product development and production process, application of communications technologies to enable collaborative work between geographically dispersed product development team members and introduction of flexible automation of production processes. Industry has rarely experienced as dramatic an infusion of new technologies or as extensive a change in culture and work practices. Human factors will not only play a vital role in accomplishing the technical and social objectives of agile manufacturing. but has an opportunity to participate in shaping the evolution of industry paradigms for the 21st century.

  15. Information technology in fuel manufacturing

    International Nuclear Information System (INIS)

    Seshagiri Rao, G.R.; Arora, U.K.; Mohanty, Deepak; Siva Kumar, G.V.S.M.; Banerjee, P.K.

    2012-01-01

    NFC, Hyderabad is engaged in manufacturing of fuel assemblies required for Indian Nuclear Power Programme. During the manufacturing process, the basic Uranium Fuel and Zirconium alloy cladding tubes travels through several work centers, machines and exposes to various process parameters. For analyzing the fuel performance these parameters are indicators and is a requirement to record such history by both manufacturer and customer. NFC has planned to deploy Information Technology (IT) Systems from MDU/UOC Dissolution to Finished Fuel Assembly dispatch stage by using Radio Frequency IDentification (RFID)/Barcode Technologies. IT Systems are connected to electronic weigh balances to acquire material weight data automatically. The IT Systems are also designed to receive data from small Island Systems like Helium leak testing equipments. As a pilot project the system is initially implemented from empty tube Tray preparation stage to Fuel Assembly Packing and dispatch stage, containing about more than 14 processes. The system was built using open source technology platform and was deployed on a cost effective Hardware environment. The present paper describes the development process of the system, Implementation challenges faced and change management. The paper also discusses about fruits of implementation and productivity improvements. (author)

  16. Additive manufacturing of tunable lenses

    Science.gov (United States)

    Schlichting, Katja; Novak, Tobias; Heinrich, Andreas

    2017-02-01

    Individual additive manufacturing of optical systems based on 3D Printing offers varied possibilities in design and usage. In addition to the additive manufacturing procedure, the usage of tunable lenses allows further advantages for intelligent optical systems. Our goal is to bring the advantages of additive manufacturing together with the huge potential of tunable lenses. We produced tunable lenses as a bundle without any further processing steps, like polishing. The lenses were designed and directly printed with a 3D Printer as a package. The design contains the membrane as an optical part as well as the mechanical parts of the lens, like the attachments for the sleeves which contain the oil. The dynamic optical lenses were filled with an oil. The focal length of the lenses changes due to a change of the radius of curvature. This change is caused by changing the pressure in the inside of the lens. In addition to that, we designed lenses with special structures to obtain different areas with an individual optical power. We want to discuss the huge potential of this technology for several applications. Further, an appropriate controlling system is needed. Wéll show the possibilities to control and regulate the optical power of the lenses. The lenses could be used for illumination tasks, and in the future, for individual measurement tasks. The main advantage is the individuality and the possibility to create an individual design which completely fulfills the requirements for any specific application.

  17. On English Locative Subjects

    Directory of Open Access Journals (Sweden)

    Gabriela Brůhová

    2017-07-01

    Full Text Available The paper analyses English sentences with thematic locative subjects. These subjects were detected as translation counterparts of Czech sentenceinitial locative adverbials realized by prepositional phrases with the prepositions do (into, na (on, v/ve (in, z/ze (from complemented by a noun. In the corresponding English structure, the initial scene-setting adverbial is reflected in the thematic subject, which results in the locative semantics of the subject. The sentences are analysed from syntactic, semantic and FSP aspects. From the syntactic point of view, we found five syntactic patterns of the English sentences with a locative subject (SV, SVA, SVO, SVpassA and SVCs that correspond to Czech sentences with initial locative adverbials. On the FSP level the paper studies the potential of the sentences to implement the Presentation or Quality Scale. Since it is the “semantic content of the verb that actuates the presentation semantics of the sentence” (Duškova, 2015a: 260, major attention is paid to the syntactic-semantic structure of the verb. The analysis of the semantics of the English sentences results in the identification of two semantic classes of verbs which co-occur with the English locative subject.

  18. 26 CFR 48.4221-2 - Tax-free sale of articles to be used for, or resold for, further manufacture.

    Science.gov (United States)

    2010-04-01

    ... resold for, further manufacture. 48.4221-2 Section 48.4221-2 Internal Revenue INTERNAL REVENUE SERVICE... manufacture. (a) Further manufacture—(1) In general. Under prescribed conditions, an article subject to tax...)(1), for use by the purchaser in further manufacture, or for resale by the purchaser to a second...

  19. Additive Manufacturing of Aerospace Propulsion Components

    Science.gov (United States)

    Misra, Ajay K.; Grady, Joseph E.; Carter, Robert

    2015-01-01

    The presentation will provide an overview of ongoing activities on additive manufacturing of aerospace propulsion components, which included rocket propulsion and gas turbine engines. Future opportunities on additive manufacturing of hybrid electric propulsion components will be discussed.

  20. Current trend in latex dipped products manufacturing

    International Nuclear Information System (INIS)

    Wong, W.S.C.

    1996-01-01

    The paper present the activities in dipped products manufacturing in Malaysia; the activities carried out by MARGMA - Malaysian Rubber Glove manufacturer; other issues discussed such as labour, pricing environmental issue, product certification in this activity

  1. THE DYNAMICS OF BEST MANUFACTURING PRACTICES

    DEFF Research Database (Denmark)

    Timenes Laugen, Bjørge; Acur, Nuran; Boer, Harry

    and manufacturing, and improving manufacturing process maintain their status as best practices, while servitization and supply chain management are new best practices. Globalization and responsibility are proposed as promising practices, and technology is suggested as a qualifying practice....

  2. Hydropower Manufacturing and Supply Chain Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Cotrell, Jason R [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-01-02

    Hydropower Manufacturing and Supply Chain Analysis presentation from the WPTO FY14-FY16 Peer Review. The project objective is to provide data and insights to inform investment strategies, policy, and other decisions to promote economic growth and manufacturing.

  3. Recent development of cellular manufacturing systems

    Indian Academy of Sciences (India)

    be manufactured in a cell, and the machines, which will comprise that cell, can be ... approaches for the CF problem which is referred to as Production Flow Analysis (PFA). ... programming model of cellular manufacturing system design which ...

  4. Dynamic cellular manufacturing system design considering ...

    Indian Academy of Sciences (India)

    Kamal Deep

    cellular manufacturing system in a company is division of ... designed to be assembled from a small number of stan- ..... contingency part process route in addition to the alternate .... istic industrial manufacturing vision considering multiple.

  5. Zambian manufacturing performance in comparative perspective

    NARCIS (Netherlands)

    Yamfwa, F.K.; Szirmai, A.; Lwamba, C.

    2002-01-01

    This paper presents an analysis of Zambian manufacturing performance since 1964. It presents new estimates of labour productivity growth and total factor productivity growth. After a period of growth and labour productivity improvement till 1974, Zambian manufacturing suffered from increasing

  6. Improved Large Aperture Collector Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    O' Rourke, Deven [Abengoa Solar LLC, Lakewood, CO (United States); Farr, Adrian [Abengoa Solar LLC, Lakewood, CO (United States)

    2015-12-01

    The parabolic trough is the most established CSP technology and carries a long history of design experimentation dating back to the 1970’s. This has led to relatively standardized collector architectures, a maturing global supply chain, and a fairly uniform cost reduction strategy. Abengoa has deployed more than 1,500MWe of CSP troughs across several countries and has built and tested full-scale prototypes of many R&D concepts. The latest trough R&D efforts involved efforts to internalize non-CSP industry experience including a preliminary DFMA principles review done with Boothroyd Dewhurst, a construction literature review by the Arizona State University School of Construction Management, and two more focused manufacturing engineering subcontracts done by Ricardo Inc. and the nonprofit Edison Welding Institute. The first two studies highlighted strong opportunities in lowering part count, standardizing components and fasteners, developing modular designs to support prefabrication and automation, and devising simple, error-proof manual assembly methods. These principles have delivered major new cost savings in otherwise “mature” products in analogous industries like automotive, truck trailer manufacture, metal building fabrication, and shipbuilding. For this reason, they were core in the design development of the SpaceTube® collector, and arguably key to its early successes. The latter two studies were applied specifically to the first-generation SpaceTube® design and were important in setting the direction of the present SolarMat project. These studies developed a methodology to analyze the costs of manufacture and assembly, and identify new tooling concepts for more efficient manufacture. Among the main opportunities identified in these studies were the automated mirror arm manufacturing concept and the need for a less infrastructure-intensive assembly line, both of which now form central pillars of the SolarMat project strategy. These new designs will be

  7. Additive Manufacturing of Fuel Injectors

    Energy Technology Data Exchange (ETDEWEB)

    Sadek Tadros, Dr. Alber Alphonse [Edison Welding Institute, Inc., Columbus, OH (United States); Ritter, Dr. George W. [Edison Welding Institute, Inc., Columbus, OH (United States); Drews, Charles Donald [Edison Welding Institute, Inc., Columbus, OH (United States); Ryan, Daniel [Solar Turbines Inc., San Diego, CA (United States)

    2017-10-24

    Additive manufacturing (AM), also known as 3D-printing, has been shifting from a novelty prototyping paradigm to a legitimate manufacturing tool capable of creating components for highly complex engineered products. An emerging AM technology for producing metal parts is the laser powder bed fusion (L-PBF) process; however, industry manufacturing specifications and component design practices for L-PBF have not yet been established. Solar Turbines Incorporated (Solar), an industrial gas turbine manufacturer, has been evaluating AM technology for development and production applications with the desire to enable accelerated product development cycle times, overall turbine efficiency improvements, and supply chain flexibility relative to conventional manufacturing processes (casting, brazing, welding). Accordingly, Solar teamed with EWI on a joint two-and-a-half-year project with the goal of developing a production L-PBF AM process capable of consistently producing high-nickel alloy material suitable for high temperature gas turbine engine fuel injector components. The project plan tasks were designed to understand the interaction of the process variables and their combined impact on the resultant AM material quality. The composition of the high-nickel alloy powders selected for this program met the conventional cast Hastelloy X compositional limits and were commercially available in different particle size distributions (PSD) from two suppliers. Solar produced all the test articles and both EWI and Solar shared responsibility for analyzing them. The effects of powder metal input stock, laser parameters, heat treatments, and post-finishing methods were evaluated. This process knowledge was then used to generate tensile, fatigue, and creep material properties data curves suitable for component design activities. The key process controls for ensuring consistent material properties were documented in AM powder and process specifications. The basic components of the project

  8. Power electronic modules design and manufacture

    CERN Document Server

    Sheng, William W

    2004-01-01

    IntroductionSelection ProcedureMaterialsInsulating Substrate and MetallizationBase PlateBonding MaterialPower Interconnection and TerminalEncapsulantPlastic Case and Cover Manufacturing of Power IGBT ModulesManufacturing Process Process Control/Long-Term ReliabilityManufacturing FacilitiesManufacturing Flow Charts DesignThermal ManagementCircuit PartitioningDesign Guidelines and ConsiderationsThermal Results of Different Samples

  9. Manufacturing strategies for time based competitive advantages

    OpenAIRE

    Lin, Yong; Ma, Shihua; Zhou, Li

    2012-01-01

    Purpose – The main purpose of this paper is to investigate the current manufacturing strategies and practices of bus manufacturers in China, and to propose a framework of manufacturing strategies for time-based competitive advantages.\\ud Design/methodology/approach – The conceptual research framework is devised from a review of the literature, and case studies are used to investigate the manufacturing strategies and practices in place in the case companies. Data is collected through semi-stru...

  10. Design and additive manufacture for flow chemistry.

    Science.gov (United States)

    Capel, Andrew J; Edmondson, Steve; Christie, Steven D R; Goodridge, Ruth D; Bibb, Richard J; Thurstans, Matthew

    2013-12-07

    We review the use of additive manufacturing (AM) as a novel manufacturing technique for the production of milli-scale reactor systems. Five well-developed additive manufacturing techniques: stereolithography (SL), multi-jet modelling (MJM), selective laser melting (SLM), laser sintering (LS) and fused deposition modelling (FDM) were used to manufacture a number of miniaturised reactors which were tested using a range of organic and inorganic reactions.

  11. Registered manufacturers of renewable energy devices

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Registered manufacturers of renewable energy devices in India are listed. The list is arranged under the headings : solar water heating system, solar cooker, solar still and water pumping wind mill. In all 38 manufacturers are listed. The list gives the postal address, name of the contact person and phone number of each manufacturer. (M.G.B.)

  12. Handbook of manufacturing engineering and technology

    CERN Document Server

    2015-01-01

    The Springer Reference Work Handbook of Manufacturing Engineering and Technology provides overviews and in-depth and authoritative analyses on the basic and cutting-edge manufacturing technologies and sciences across a broad spectrum of areas. These topics are commonly encountered in industries as well as in academia. Manufacturing engineering curricula across universities are now essential topics covered in major universities worldwide.

  13. 75 FR 71417 - Manufacturing Council Membership

    Science.gov (United States)

    2010-11-23

    ... DEPARTMENT OF COMMERCE International Trade Administration Manufacturing Council Membership AGENCY... marketing programs in support of manufacturing industries, job creation in the manufacturing sector, or the... their travel, living and other personal expenses. Meetings are held regularly and not less than annually...

  14. 19 CFR 11.2 - Manufactured tobacco.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Manufactured tobacco. 11.2 Section 11.2 Customs... PACKING AND STAMPING; MARKING Packing and Stamping § 11.2 Manufactured tobacco. (a) If the invoice and entry presented for manufactured tobacco specify all the information necessary for prompt determination...

  15. Manufacturing: the new case for vertical integration

    NARCIS (Netherlands)

    Kumpe, Ted; Bolwijn, Piet

    1988-01-01

    The article argues that the solid corporation will continue to view vertical integration as a critical part of manufacturing reform. Manufacturing reform and backward integration are related in insidious ways to the three stages of production over which the big manufacturers preside. Without

  16. The manufacturing role in fuel performance

    International Nuclear Information System (INIS)

    Barr, A.P.

    1997-01-01

    Manufacturing companies have been involved in the CANDU fuel industry for more than 40 years. Early manufacturing contributions were the development of materials and processes used to fabricate the CANDU fuel bundle. As CANDU reactors were commissioned, the manufacturing contribution has been to produce economical, high quality fuel for the CANDU market. (author)

  17. Interaction, transference, and subjectivity

    DEFF Research Database (Denmark)

    Lundgaard Andersen, Linda

    2012-01-01

    Fieldwork is one of the important methods in educational, social, and organisational research. In fieldwork, the researcher takes residence for a shorter or longer period amongst the subjects and settings to be studied. The aim of this is to study the culture of people: how people seem to make...... sense of their lives and which moral, professional, and ethical values seem to guide their behaviour and attitudes. In fieldwork, the researcher has to balance participation and observation in her attempts at representation. Consequently, the researcher’s academic and life-historical subjectivity...... is also subjected to psychodynamic processes. In this article, I draw upon a number of research inquiries to illustrate how psychodynamic processes influence research processes: data production, research questions and methodology, relations to informants, as well as interpretation and analysis. I further...

  18. Ohio Advanced Energy Manufacturing Center

    Energy Technology Data Exchange (ETDEWEB)

    Kimberly Gibson; Mark Norfolk

    2012-07-30

    The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing and implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote

  19. Method for automatically evaluating a transition from a batch manufacturing technique to a lean manufacturing technique

    Science.gov (United States)

    Ivezic, Nenad; Potok, Thomas E.

    2003-09-30

    A method for automatically evaluating a manufacturing technique comprises the steps of: receiving from a user manufacturing process step parameters characterizing a manufacturing process; accepting from the user a selection for an analysis of a particular lean manufacturing technique; automatically compiling process step data for each process step in the manufacturing process; automatically calculating process metrics from a summation of the compiled process step data for each process step; and, presenting the automatically calculated process metrics to the user. A method for evaluating a transition from a batch manufacturing technique to a lean manufacturing technique can comprise the steps of: collecting manufacturing process step characterization parameters; selecting a lean manufacturing technique for analysis; communicating the selected lean manufacturing technique and the manufacturing process step characterization parameters to an automatic manufacturing technique evaluation engine having a mathematical model for generating manufacturing technique evaluation data; and, using the lean manufacturing technique evaluation data to determine whether to transition from an existing manufacturing technique to the selected lean manufacturing technique.

  20. 77 FR 16158 - Current Good Manufacturing Practice in Manufacturing, Processing, Packing, or Holding of Drugs...

    Science.gov (United States)

    2012-03-20

    .... FDA-1997-N-0518] (formerly 97N-0300) Current Good Manufacturing Practice in Manufacturing, Processing... labeling control provisions of the current good manufacturing practice (CGMP) regulations for human and... GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS 0 1. The authority citation for 21 CFR part...

  1. Method of manufacturing semiconductor devices

    International Nuclear Information System (INIS)

    Sun, Y.S.E.

    1980-01-01

    A method of improving the electrical characteristics of semiconductor devices such as SCR's, rectifiers and triacs during their manufacture is described. The system consists of electron irradiation at an energy in excess of 250 KeV and most preferably between 1.5 and 12 MeV, producing an irradiation dose of between 5.10 12 and 5.10 15 electrons per sq. cm., and at a temperature in excess of 100 0 C preferably between 150 and 375 0 C. (U.K.)

  2. A method for manufacturing monocrystals

    International Nuclear Information System (INIS)

    Faure, Jacqueline; Malmejac, Yves; Schaub, Bernard.

    1973-01-01

    Description is given of a method for manufacturing monocrystals, substantially free of disorder, of a metal showing an allotropic transformation at a temperature lower than its melting point. Monocrystals of the raw metal having undergone a uni-directional solidification are heated to a temperature between the allotropic transformation point and the metal melting point; the monocrystals are maintained in the vicinity of that temperature for a given period of time; they are cooled down to a temperature lower than the allotropic transformation point, then they are annealed and cooled down to room temperature. Such monocrystals are used in neutron monochromators [fr

  3. Additive Manufacturing of Porous Metal

    Energy Technology Data Exchange (ETDEWEB)

    Dehoff, Ryan R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kirka, Michael M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-06-01

    Currently, helium is obtained through separation from natural gas. The current industrial process incurs significant costs and requires large energy resources to successfully achieve separation. Through utilizing Additive Manufacturing (AM) technologies it is possible to reduce both of these burdens when refining helium gas. The ability to engineer porosity levels within Inconel 718 discs for controlled separation of helium from natural gas was investigated. Arrays of samples fabricated using the electron beam melting process were analyzed for their relative porosity density. Based upon the measurements, full scale discs were fabricated, and subsequently tested to determine their effectiveness in separating helium from liquefied natural gas.

  4. Contemporary design and manufacturing technology

    CERN Document Server

    Wang, Taiyong; Zuo, Dunwen

    2013-01-01

    The special topic volume communicates the latest progress and research results of new theory, new technology, method, equipment and so on in Engineering Technology, and to grasp the updated technological and research trends in internationally. The major topics covered by the special volumes include Advanced Materials and Manufacturing Technologies, Control, Automation and Detection Systems, Advanced Design Technology, Optimization and Modeling. In 80 invited and peer-reviewed papers, mechanical and other engineers describe their recent and current research and results in advanced materials and

  5. Borated aluminum alloy manufacturing technology

    International Nuclear Information System (INIS)

    Shimojo, Jun; Taniuchi, Hiroaki; Kajihara, Katsura; Aruga, Yasuhiro

    2003-01-01

    Borated aluminum alloy is used as the basket material of cask because of its light weight, thermal conductivity and superior neutron absorbing abilities. Kobe Steel has developed a unique manufacturing process for borated aluminum alloy using a vacuum induction melting method. In this process, aluminum alloy is melted and agitated at higher temperatures than common aluminum alloy fabrication methods. It is then cast into a mold in a vacuum atmosphere. The result is a high quality aluminum alloy which has a uniform boron distribution and no impurities. (author)

  6. Subjectivity of embodiment

    Czech Academy of Sciences Publication Activity Database

    Novotný, Karel

    2014-01-01

    Roč. 4, č. 1 (2014), s. 187-195 ISSN 1804-624X R&D Projects: GA ČR(CZ) GAP401/10/1164 Institutional support: RVO:67985955 Keywords : Levinas * phenomenology * factivity * body * experience Subject RIV: AA - Philosophy ; Religion

  7. Miscellaneous subjects, ch. 18

    International Nuclear Information System (INIS)

    Brussaard, P.J.; Glaudemans, P.W.M.

    1977-01-01

    Attention is paid to a variery of subjects which are related to shell model applications, e.g. the Lanczos method for matrix diagonalization, truncation methods (seniority truncation, single-particle energy truncation and diagonal energy truncation which can be used for reducing the configuration space.) Coulomb energies and spurious states are briefly discussed. Finally attention is paid to the particle-vibrator model

  8. Barron's SAT subject test

    CERN Document Server

    Jansen, MA, Robert

    2016-01-01

    Includes one diagnostic test and three complete tests, all questions answered and explained, self-assessment guides, and subject reviews. Also features test strategies, QR codes to short instructional videos, and a detailed appendix with equations, physical constants, and a basic math review.

  9. Cloud manufacturing: from concept to practice

    Science.gov (United States)

    Ren, Lei; Zhang, Lin; Tao, Fei; Zhao, Chun; Chai, Xudong; Zhao, Xinpei

    2015-02-01

    The concept of cloud manufacturing is emerging as a new promising manufacturing paradigm, as well as a business model, which is reshaping the service-oriented, highly collaborative, knowledge-intensive and eco-efficient manufacturing industry. However, the basic concepts about cloud manufacturing are still in discussion. Both academia and industry will need to have a commonly accepted definition of cloud manufacturing, as well as further guidance and recommendations on how to develop and implement cloud manufacturing. In this paper, we review some of the research work and clarify some fundamental terminologies in this field. Further, we developed a cloud manufacturing systems which may serve as an application example. From a systematic and practical perspective, the key requirements of cloud manufacturing platforms are investigated, and then we propose a cloud manufacturing platform prototype, MfgCloud. Finally, a public cloud manufacturing system for small- and medium-sized enterprises (SME) is presented. This paper presents a new perspective for cloud manufacturing, as well as a cloud-to-ground solution. The integrated solution proposed in this paper, including the terminology, MfgCloud, and applications, can push forward this new paradigm from concept to practice.

  10. Challenges in teaching modern manufacturing technologies

    Science.gov (United States)

    Ngaile, Gracious; Wang, Jyhwen; Gau, Jenn-Terng

    2015-07-01

    Teaching of manufacturing courses for undergraduate engineering students has become a challenge due to industrial globalisation coupled with influx of new innovations, technologies, customer-driven products. This paper discusses development of a modern manufacturing course taught concurrently in three institutions where students collaborate in executing various projects. Lectures are developed to contain materials featuring advanced manufacturing technologies, R&D trends in manufacturing. Pre- and post-surveys were conducted by an external evaluator to assess the impact of the course on increase in student's knowledge of manufacturing; increase students' preparedness and confidence in effective communication and; increase students' interest in pursuing additional academic studies and/or a career path in manufacturing and high technology. The surveyed data indicate that the students perceived significant gains in manufacturing knowledge and preparedness in effective communication. The study also shows that implementation of a collaborative course within multiple institutions requires a robust and collective communication platform.

  11. 37 CFR 1.710 - Patents subject to extension of the patent term.

    Science.gov (United States)

    2010-07-01

    ... of Patent Term Extension of Patent Term Due to Regulatory Review § 1.710 Patents subject to extension... primarily manufactured using recombinant DNA, recombinant RNA, hybridoma technology, or other processes...

  12. Membrane manufacture for peptide separations

    KAUST Repository

    Kim, Dooli; Salazar Moya, Octavio Ruben; Nunes, Suzana Pereira

    2016-01-01

    Nanostructured polymeric membranes are key tools in biomedical applications such as hemodialysis, protein separations, in the food industry, and drinking water supply from seawater. Despite of the success in different separation processes, membrane manufacture itself is at risk, since the most used solvents are about to be banned in many countries due to environmental and health issues. We propose for the first time the preparation of polyethersulfone membranes based on dissolution in the ionic liquid 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM]DEP). We obtained a series of membranes tailored for separation of solutes with molecular weight of 30, 5, 1.3, and 1.25 kg mol-1 with respective water permeances of 140, 65, 30 and 20 Lm-2h-1bar-1. We demonstrate their superior efficiency in the separation of complex mixtures of peptides with molecular weights in the range of 800 to 3500 gmol-1. Furthermore, the thermodynamics and kinetics of phase separation leading to the pore formation in the membranes were investigated. The rheology of the solutions and the morphology of the prepared membranes were examed and compared to those of polyethersulfone in organic solvents currently used for membrane manufacture.

  13. Manufacturers' support to plant operation

    International Nuclear Information System (INIS)

    Kuschel, D.

    1996-01-01

    For more than 30 years now, safety and availablity of German nuclear power plants has been a common interest of the plant owners and the manufacturing company KWU. This longstanding collaboration for a common goal has created a safety culture unprecented in other countries, and a partnership worth to be continued. Due to the nuclear power phaseout policy, the priority today is on maintaining and safeguarding economically efficient operation of existing power plants. KWU have been adapting their business strategy to the change in the market, and are prepared to stick to this line. Thus KWU and plant operators see to it that the acquired competence in nuclear power plant technology will remain to be concentrated in the hands of the manufacturers. Continuing the partnership in this field, and encouraged by the placement of orders for the future EPR and the SWR 1000, KWU and plant operators will be in the position to offer a sound option for future decisions about construction of new nuclear power plants in Germany. (orig.) [de

  14. Additive manufacturing of RF absorbers

    Science.gov (United States)

    Mills, Matthew S.

    The ability of additive manufacturing techniques to fabricate integrated electromagnetic absorbers tuned for specific radio frequency bands within structural composites allows for unique combinations of mechanical and electromagnetic properties. These composites and films can be used for RF shielding of sensitive electromagnetic components through in-plane and out-of-plane RF absorption. Structural composites are a common building block of many commercial platforms. These platforms may be placed in situations in which there is a need for embedded RF absorbing properties along with structural properties. Instead of adding radar absorbing treatments to the external surface of existing structures, which adds increased size, weight and cost; it could prove to be advantageous to integrate the microwave absorbing properties directly into the composite during the fabrication process. In this thesis, a method based on additive manufacturing techniques of composites structures with prescribed electromagnetic loss, within the frequency range 1 to 26GHz, is presented. This method utilizes screen printing and nScrypt micro dispensing to pattern a carbon based ink onto low loss substrates. The materials chosen for this study will be presented, and the fabrication technique that these materials went through to create RF absorbing structures will be described. The calibration methods used, the modeling of the RF structures, and the applications in which this technology can be utilized will also be presented.

  15. Mechanics of additively manufactured biomaterials.

    Science.gov (United States)

    Zadpoor, Amir A

    2017-06-01

    Additive manufacturing (3D printing) has found many applications in healthcare including fabrication of biomaterials as well as bioprinting of tissues and organs. Additively manufactured (AM) biomaterials may possess arbitrarily complex micro-architectures that give rise to novel mechanical, physical, and biological properties. The mechanical behavior of such porous biomaterials including their quasi-static mechanical properties and fatigue resistance is not yet well understood. It is particularly important to understand the relationship between the designed micro-architecture (topology) and the resulting mechanical properties. The current special issue is dedicated to understanding the mechanical behavior of AM biomaterials. Although various types of AM biomaterials are represented in the special issue, the primary focus is on AM porous metallic biomaterials. As a prelude to this special issue, this editorial reviews some of the latest findings in the mechanical behavior of AM porous metallic biomaterials so as to describe the current state-of-the-art and set the stage for the other studies appearing in the issue. Some areas that are important for future research are also briefly mentioned. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Fugitive emissions from nanopowder manufacturing

    International Nuclear Information System (INIS)

    Trompetter, W. J.; Ancelet, T.; Davy, P. K.; Kennedy, J.

    2016-01-01

    In response to health and safety questions and concerns regarding particulate matter emissions from equipment used for synthesizing NiFe and TiO 2 nanopowders, a study was undertaken to assess their impact on the air quality inside and outside a laboratory where the manufacturing equipment is operated. Elemental concentrations determined by ion beam analysis (IBA) of air particulate matter (PM) samples collected hourly with a Streaker TM sampler were used to identify possible sources and estimate contributions from nanopowder production and other sources. The fugitive nanopowder emissions were the highest at the indoor sampling location when powders were being manufactured. Average fugitive emissions of 210 ng m −3 (1-h average) (maximum 2163 ng m −3 1-h average) represented 2 % (maximum 20 %) of the average PM collected (9359 ng m −3 1-h average). The measured NiFe alloy or TiO 2 PM concentrations were much smaller than the 8-h time-weighted average (TWA) workplace exposure standards (WES) for these materials (≥1,000,000 ng m −3 ). Most PM was found to be from infiltrated outdoor ambient sources. This suggests that nanopowder production in the laboratory is not likely to have adverse health effects on individuals using the equipment, although further improvements can be made to further limit exposure.Graphical abstract

  17. IMPROVED COMMUNICATION BETWEEN MANUFACTURING ROBOTS

    Directory of Open Access Journals (Sweden)

    R. Stopforth

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Communication between manufacturing robots and autonomous vehicles in the industrial environment is important, sinceinstructions and information are crucial for communication between the control station and the robot station. Information is required between different manufacturing robots for optimal performance and dedication to industrial tasks within the environment. Failures in communication could cause robots to be a safety hazard or to perform tasks that are not required. This article shows how communication was improved with the use of the Robotics Communication Protocol (RCP and an extension of this protocol.

    AFRIKAANSE OPSOMMING: Kommunikasie tussen vervaardigingsrobotte en outonome voertuie in ‘n industriële omgewing is belangrik, aangesien opdragte en inligting krities is vir kommunikasie tussen die beheerstasie en die robotstasie. Inligting word benodig tussen verskillende vervaardigingsrobotte vir optimale werkverrigting en toewyding aan take in die omgewing. Mislukte kommunikasie mag veroorsaak dat robotte ‘n veiligheidsrisiko word of veroorsaak dat onnodige take verrig word. Hierdie artikel toon hoe kommunikasie verbeter is deur die gebruik van die “robotika-kommunikasie-protokol” en ‘n uitbreiding van die protokol.

  18. Manufactured Porous Ambient Surface Simulants

    Science.gov (United States)

    Carey, Elizabeth M.; Peters, Gregory H.; Chu, Lauren; Zhou, Yu Meng; Cohen, Brooklin; Panossian, Lara; Green, Jacklyn R.; Moreland, Scott; Backes, Paul

    2016-01-01

    The planetary science decadal survey for 2013-2022 (Vision and Voyages, NRC 2011) has promoted mission concepts for sample acquisition from small solar system bodies. Numerous comet-sampling tools are in development to meet this standard. Manufactured Porous Ambient Surface Simulants (MPASS) materials provide an opportunity to simulate variable features at ambient temperatures and pressures to appropriately test potential sample acquisition systems for comets, asteroids, and planetary surfaces. The original "flavor" of MPASS materials is known as Manufactured Porous Ambient Comet Simulants (MPACS), which was developed in parallel with the development of the Biblade Comet Sampling System (Backes et al., in review). The current suite of MPACS materials was developed through research of the physical and mechanical properties of comets from past comet missions results and modeling efforts, coordination with the science community at the Jet Propulsion Laboratory and testing of a wide range of materials and formulations. These simulants were required to represent the physical and mechanical properties of cometary nuclei, based on the current understanding of the science community. Working with cryogenic simulants can be tedious and costly; thus MPACS is a suite of ambient simulants that yields a brittle failure mode similar to that of cryogenic icy materials. Here we describe our suite of comet simulants known as MPACS that will be used to test and validate the Biblade Comet Sampling System (Backes et al., in review).

  19. Membrane manufacture for peptide separations

    KAUST Repository

    Kim, Dooli

    2016-06-07

    Nanostructured polymeric membranes are key tools in biomedical applications such as hemodialysis, protein separations, in the food industry, and drinking water supply from seawater. Despite of the success in different separation processes, membrane manufacture itself is at risk, since the most used solvents are about to be banned in many countries due to environmental and health issues. We propose for the first time the preparation of polyethersulfone membranes based on dissolution in the ionic liquid 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM]DEP). We obtained a series of membranes tailored for separation of solutes with molecular weight of 30, 5, 1.3, and 1.25 kg mol-1 with respective water permeances of 140, 65, 30 and 20 Lm-2h-1bar-1. We demonstrate their superior efficiency in the separation of complex mixtures of peptides with molecular weights in the range of 800 to 3500 gmol-1. Furthermore, the thermodynamics and kinetics of phase separation leading to the pore formation in the membranes were investigated. The rheology of the solutions and the morphology of the prepared membranes were examed and compared to those of polyethersulfone in organic solvents currently used for membrane manufacture.

  20. Fugitive emissions from nanopowder manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Trompetter, W. J., E-mail: b.trompetter@gns.cri.nz; Ancelet, T.; Davy, P. K.; Kennedy, J. [GNS Science (New Zealand)

    2016-07-15

    In response to health and safety questions and concerns regarding particulate matter emissions from equipment used for synthesizing NiFe and TiO{sub 2} nanopowders, a study was undertaken to assess their impact on the air quality inside and outside a laboratory where the manufacturing equipment is operated. Elemental concentrations determined by ion beam analysis (IBA) of air particulate matter (PM) samples collected hourly with a Streaker{sup TM} sampler were used to identify possible sources and estimate contributions from nanopowder production and other sources. The fugitive nanopowder emissions were the highest at the indoor sampling location when powders were being manufactured. Average fugitive emissions of 210 ng m{sup −3} (1-h average) (maximum 2163 ng m{sup −3} 1-h average) represented 2 % (maximum 20 %) of the average PM collected (9359 ng m{sup −3} 1-h average). The measured NiFe alloy or TiO{sub 2} PM concentrations were much smaller than the 8-h time-weighted average (TWA) workplace exposure standards (WES) for these materials (≥1,000,000 ng m{sup −3}). Most PM was found to be from infiltrated outdoor ambient sources. This suggests that nanopowder production in the laboratory is not likely to have adverse health effects on individuals using the equipment, although further improvements can be made to further limit exposure.Graphical abstract.

  1. 75 FR 26794 - New United Motor Manufacturing, Inc., Formerly a Joint Venture of General Motors Corporation and...

    Science.gov (United States)

    2010-05-12

    ... Manufacturing, Inc., Formerly a Joint Venture of General Motors Corporation and Toyota Motor Corporation... United Motor Manufacturing, Inc., formerly a joint venture of General Motors Corporation and Toyota Motor... reviewed the certification for workers of the subject firm. The workers assemble the Toyota Corolla and the...

  2. In Vivo Transfer and Microevolution of Avian Native IncA/C2blaNDM-1-Carrying Plasmid pRH-1238 during a Broiler Chicken Infection Study.

    Science.gov (United States)

    Hadziabdic, Sead; Fischer, Jennie; Malorny, Burkhard; Borowiak, Maria; Guerra, Beatriz; Kaesbohrer, Annemarie; Gonzalez-Zorn, Bruno; Szabo, Istvan

    2018-04-01

    The emergence and spread of carbapenemase-producing Enterobacteriaceae (CPE) in wildlife and livestock animals pose an important safety concern for public health. With our in vivo broiler chicken infection study, we investigated the transfer and experimental microevolution of the bla NDM-1 -carrying IncA/C 2 plasmid (pRH-1238) introduced by avian native Salmonella enterica subsp. enterica serovar Corvallis without inducing antibiotic selection pressure. We evaluated the dependency of the time point of inoculation on donor ( S Corvallis [12-SA01738]) and plasmid-free Salmonella recipient [d-tartrate-fermenting (d-Ta + ) S Paratyphi B (13-SA01617), referred to here as S Paratyphi B (d-Ta + )] excretion by quantifying their excretion dynamics. Using plasmid profiling by S1 nuclease-restricted pulsed-field gel electrophoresis, we gained insight into the variability of the native plasmid content among S Corvallis reisolates as well as plasmid acquisition in S Paratyphi B (d-Ta + ) and the enterobacterial gut microflora. Whole-genome sequencing enabled us to gain an in-depth insight into the microevolution of plasmid pRH-1238 in S Corvallis and enterobacterial recipient isolates. Our study revealed that the fecal excretion of avian native carbapenemase-producing S Corvallis is significantly higher than that of S Paratyphi (d-Ta + ) and is not hampered by S Paratyphi (d-Ta + ). Acquisition of pRH-1238 in other Enterobacteriaceae and several events of plasmid pRH-1238 transfer to different Escherichia coli sequence types and Klebsiella pneumoniae demonstrated an interspecies broad host range. Regardless of the microevolutionary structural deletions in pRH-1238, the single carbapenem resistance marker bla NDM-1 was maintained on pRH-1238 throughout the trial. Furthermore, we showed the importance of the gut E. coli population as a vector of pRH-1238. In a potential scenario of the introduction of NDM-1-producing S Corvallis into a broiler flock, the pRH-1238 plasmid could

  3. Effect of surface roughness on the fatigue life of laser additive manufactured Ti6Al4V alloy

    Czech Academy of Sciences Publication Activity Database

    Bača, A.; Konečná, R.; Nicoletto, G.; Kunz, Ludvík

    2015-01-01

    Roč. 15, č. 4 (2015), s. 498-502 ISSN 1213-2489 Institutional support: RVO:68081723 Keywords : Additive manufacturing * direct metal laser sintering * Fatigue life Subject RIV: JL - Materials Fatigue, Friction Mechanics

  4. Radiological significance of thorium processing in manufacturing

    International Nuclear Information System (INIS)

    Davis, M.W.

    1985-01-01

    The study of thorium processing in manufacturing comprised monitoring programs at a plant where thorium dioxide was in use and another where the use of thorium nitrate had been discontinued. The measurements of the solubility in simulated lung fluid proved that both materials belonged in the Y Class with dissolution half-times greater than 500 days. Bioassay measurements of 20 subjects from both facilities proved that in vitro monitoring methods, urine, feces, hair and nails analysis were not sufficient indicators of thorium uptake. In vivo monitoring by phoswich and large sodium iodide detectors were proven to be good methods of determining thorium lung burdens. The thoron in breath technique was shown to have a lower limit of sensitivity than lung counting, however, due to lack of information regarding the thoron escape rate from the thorium particles in the lungs the method is not as accurate as lung counting. Two subjects at the thorium dioxide facility had lung burdens of 21+- 16 Bq and 29+- 24 Bq Th 232 and one at the thorium nitrate facility had a lung burden of 37+- 13 Bq. Improvements in the procedures and use of a glove box were among the recommendations to reduce the inhalation of thorium by workers at the thorium dioxide facility. Decontamination of several rooms at the thorium nitrate facility and sealing of the walls and floors were recommended in order to reduce the escape of thoron gas into the room air. The risk to non Atomic Radiation Workers was primarily due to thoron daughters in air while gamma radiation and thorium in air were less important. Conversely, at the thorium dioxide facility the inhalation of thorium in air was the most significant exposure pathway

  5. CERCA's fuel elements instrumentation manufacturing

    International Nuclear Information System (INIS)

    Harbonnier, G.; Jarousse, C.; Pin, T.; Febvre, M.; Colomb, P.

    2005-01-01

    When research and test reactors wish to further understand the Fuel Elements behavior when operating as well as mastering their irradiation conditions, operators carry out neutron and thermo hydraulic analysis. For thermal calculation, the codes used have to be preliminary validated, at least in the range of the reactor safety operational limits. When some further investigations are requested either by safety authorities or for its own reactor needs, instrumented tools are the ultimate solution for providing representative measurements. Such measurements can be conducted for validating thermal calculation codes, at nominal operating condition as well as during transients ones, or for providing numerous and useful data in the frame of a new products qualification program. CERCA, with many years of experience for implanting thermocouples in various products design, states in this poster his manufacturing background on instrumented elements, plates or targets. (author)

  6. An Additive Manufacturing Test Artifact

    Science.gov (United States)

    Moylan, Shawn; Slotwinski, John; Cooke, April; Jurrens, Kevin; Donmez, M Alkan

    2014-01-01

    A test artifact, intended for standardization, is proposed for the purpose of evaluating the performance of additive manufacturing (AM) systems. A thorough analysis of previously proposed AM test artifacts as well as experience with machining test artifacts have inspired the design of the proposed test artifact. This new artifact is designed to provide a characterization of the capabilities and limitations of an AM system, as well as to allow system improvement by linking specific errors measured in the test artifact to specific sources in the AM system. The proposed test artifact has been built in multiple materials using multiple AM technologies. The results of several of the builds are discussed, demonstrating how the measurement results can be used to characterize and improve a specific AM system. PMID:26601039

  7. Additive manufacturing with polypropylene microfibers.

    Science.gov (United States)

    Haigh, Jodie N; Dargaville, Tim R; Dalton, Paul D

    2017-08-01

    The additive manufacturing of small diameter polypropylene microfibers is described, achieved using a technique termed melt electrospinning writing. Sequential fiber layering, which is important for accurate three-dimensional fabrication, was achieved with the smallest fiber diameter of 16.4±0.2μm obtained. The collector speed, temperature and melt flow rate to the nozzle were optimized for quality and minimal fiber pulsing. Of particular importance to the success of this method is appropriate heating of the collector plate, so that the electrostatically drawn filament adheres during the direct-writing process. By demonstrating the direct-writing of polypropylene, new applications exploiting the favorable mechanical, stability and biocompatible properties of this polymer are envisaged. Copyright © 2017. Published by Elsevier B.V.

  8. Manufacturing real wages in Mexico

    Directory of Open Access Journals (Sweden)

    López V Antonia

    2006-01-01

    Full Text Available In this paper we analyse the recent evolution and determinants of real wages in Mexico?s manufacturing sector, using theories based on the assumption of imperfect competition both in the product and in the labour markets, especially wage-bargain theory, insider-outsider and mark-up models. We show evidence that the Mexican labour market does not behave as a traditional competitive market. The proposed explanation for this fact is that some workers benefit from advantages when compared with others, so that they can get a greater share of the proceedings of the productive process. Also, we find that changes in the degree of competition in the market for output influence the behaviour of real wages.

  9. USCAR LEP ESST Advanced Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Lazarus, L.J.

    2000-09-25

    The objective of this task was to provide processing information data summaries on powder metallurgy (PM) alloys that meet the partner requirements for the production of low mass, highly accurate, near-net-shape powertrain components. This required modification to existing ISO machinability test procedures and development of a new drilling test procedure. These summaries could then be presented in a web page format. When combined with information generated from the USCAR CRADA this would allow chemical, metallurgical, and machining data on PM alloys to be available to all engineering and manufacturing personnel that have access to in-house networks. The web page format also allows for the additions of other wrought materials, making this a valuable tool to the technical staffs.

  10. Development of Integration in Manufacturing

    DEFF Research Database (Denmark)

    Sørensen, Torben; Trostmann, Erik

    1996-01-01

    significance to all manufacturing industries.International standardization based on the product model definition standard STEP (ISO10303) is playing a key role in promoting a modern approach to Product Data Technology. The initial release of STEP, consisting of twelve essential parts, has recently been...... must be extended to cope with descriptions of functional behavior of products.In the robotics area, Computer Aided Robotics (CAR) systems for design, off-line programming, and simulation are currently increasing their model features with new topics, such as multi-body dynamics, realistic motion......Current international developments in the broad field of Product Data Technology are advancing rapidly and are leading up to new levels of technology in product model definition, product model communications, enterprise integration and cooperation. These developments will be of strategic...

  11. Method of manufacturing nuclear fuel rods

    International Nuclear Information System (INIS)

    Sato, Masao; Oyama, Masatoshi; Yamamoto, Takanobu.

    1976-01-01

    Object: To discriminate the properties of light white deposits on a clad tube during the process of manufacturing nuclear fuel rods and then remove this to reproduce a good clad tube, thereby enhancing a yield of the clad tube. Structure: When a light white deposits is found to be appeared on outer or inner surface of coating during the process of appearance inspection, this is then permitted to subject to treatment of hot water immersion and discrimination. Requirements for removal of adhered matter in the process of treatment of hot water immersion are that deioned water of specific resistance 5 x 10 5 ohms or more is used with water temperature maintained at 60 to 100 0 C for immersion treatment for 10 to 30 minutes. In this case, however, if the water temperature is more than 80 0 C, the immersion time can be set less than 10 minutes. With the addition of such process described above, about 2.5% of total receiving number can be reproduced. (Yoshihara, H.)

  12. Spatial Bimetallic Castings Manufactured from Iron Alloys

    Directory of Open Access Journals (Sweden)

    M. Cholewa

    2007-07-01

    Full Text Available In this paper a conception for manufacturing method of skeleton castings with composite features was shown. Main application of such castings are the working organs of machines subjected to intensive abrasive and erosive wear. Skeleton geometry was based on three-dimensional cubic net consisting of circular connectors and nodes joining 6 connectors according to Cartesian co-ordinate system. Dimension of an elementary cell was equal to 10 mm and diameter of single connector was equal to 5 mm. For bimetallic castings preparation two Fe based alloys were used: L25SHMN cast steel for skeleton substrate and ZlCr15NiMo cast iron for working part of the casting. In presented work obtained structure was analyzed with indication of characteristic regions. Authors described phenomena occurring at the alloys interface and phases in transition zone. A thesis was formulated concerning localization of transition zone at the cast iron matrix – cast steel reinforcement interface. Direction of further studies were indicated.

  13. Vision as subjective perception

    International Nuclear Information System (INIS)

    Reppas, J.B.; Dale, A.; Sereno, M.; Tootell, R.

    1996-01-01

    The human brain is not very different of the monkey's one: at least, its visual cortex is organized as a similar scheme. Specialized areas in the movement analysis are found and others in the forms perception. In this work, the author tries to answer to the following questions: 1)why so many visual areas? What are exactly their role in vision? Thirteen years of experimentation have not allowed to answer to these questions. The cerebral NMR imaging gives the opportunity of understanding the subjective perception of the visual world. One step which is particularly described in this work is to know how the visual cortex reacts to the optical illusions. (O.M.)

  14. The Subjectivity of Participation

    DEFF Research Database (Denmark)

    Nissen, Morten

    of a community of social/youth workers in Copenhagen between 1987 and 2003, who developed a pedagogy through creating collectives and mobilizing young people as participants. The theoretical and practical traditions are combined in a unique methodology viewing research as a contentious modeling of prototypical......What is a 'we' – a collective – and how can we use such communal self-knowledge to help people? This book is about collectivity, participation, and subjectivity – and about the social theories that may help us understand these matters. It also seeks to learn from the innovative practices and ideas...

  15. Cyber physical systems role in manufacturing technologies

    Science.gov (United States)

    Al-Ali, A. R.; Gupta, Ragini; Nabulsi, Ahmad Al

    2018-04-01

    Empowered by the recent development in single System-on-Chip, Internet of Things, and cloud computing technologies, cyber physical systems are evolving as a major controller during and post the manufacturing products process. In additional to their real physical space, cyber products nowadays have a virtual space. A product virtual space is a digital twin that is attached to it to enable manufacturers and their clients to better manufacture, monitor, maintain and operate it throughout its life time cycles, i.e. from the product manufacturing date, through operation and to the end of its lifespan. Each product is equipped with a tiny microcontroller that has a unique identification number, access code and WiFi conductivity to access it anytime and anywhere during its life cycle. This paper presents the cyber physical systems architecture and its role in manufacturing. Also, it highlights the role of Internet of Things and cloud computing in industrial manufacturing and factory automation.

  16. Advanced manufacturing: Technology and international competitiveness

    Energy Technology Data Exchange (ETDEWEB)

    Tesar, A.

    1995-02-01

    Dramatic changes in the competitiveness of German and Japanese manufacturing have been most evident since 1988. All three countries are now facing similar challenges, and these challenges are clearly observed in human capital issues. Our comparison of human capital issues in German, Japanese, and US manufacturing leads us to the following key judgments: Manufacturing workforces are undergoing significant changes due to advanced manufacturing technologies. As companies are forced to develop and apply these technologies, the constituency of the manufacturing workforce (especially educational requirements, contingent labor, job content, and continuing knowledge development) is being dramatically and irreversibly altered. The new workforce requirements which result due to advanced manufacturing require a higher level of worker sophistication and responsibility.

  17. Just-in-time Design and Additive Manufacture of Patient-specific Medical Implants

    Science.gov (United States)

    Shidid, Darpan; Leary, Martin; Choong, Peter; Brandt, Milan

    Recent advances in medical imaging and manufacturing science have enabled the design and production of complex, patient-specific orthopaedic implants. Additive Manufacture (AM) generates three-dimensional structures layer by layer, and is not subject to the constraints associated with traditional manufacturing methods. AM provides significant opportunities for the design of novel geometries and complex lattice structures with enhanced functional performance. However, the design and manufacture of patient-specific AM implant structures requires unique expertise in handling various optimization platforms. Furthermore, the design process for complex structures is computationally intensive. The primary aim of this research is to enable the just-in-time customisation of AM prosthesis; whereby AM implant design and manufacture be completed within the time constraints of a single surgical procedure, while minimising prosthesis mass and optimising the lattice structure to match the stiffness of the surrounding bone tissue. In this research, a design approach using raw CT scan data is applied to the AM manufacture of femoral prosthesis. Using the proposed just-in-time concept, the mass of the prosthesis was rapidly designed and manufactured while satisfying the associated structural requirements. Compressive testing of lattice structures manufactured using proposed method shows that the load carrying capacity of the resected composite bone can be recovered by up to 85% and the compressive stiffness of the AM prosthesis is statistically indistinguishable from the stiffness of the initial bone.

  18. Manufacture and maintenance of laboratory equipment

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Chang Kyu; Hwang, Bong Ha; Lee, Jong Wha; Kim, Jong Kyun; Yeum, Ki Eon; Park, Myung Ku; Hong, Soon Eon; Choi, Ho Young; An, Dae Kyu; An, Choon; Park, In Won; Kim, Kyung Sik; Lee, Won Jae; Yoon, Ki Byung; Kim, Heung Woo; Lee, In Bae; Yeom, Jeong Hyun; Lee, Chul Ku; Sin, Keon Ju; Oh, Wan Ho; Seo, Yong Chil; Yang, Song Yeul; Lee, Young Soon; Choi, Byung Kwon; Chang, Kyung Duk [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1993-12-01

    This report on the manufacture and maintenance of laboratory equipment contains working contents, scope and contents of request working to the machine shop, also records the principal production design, manufacture contents and a relevant working drawing. The working content and scope of the machine shop is to support the successful and convenient performance of the R and D by manufacture and maintenance of all sorts of laboratory equipment. 11 tabs., 3 figs. (Author) .new.

  19. Manufacture and maintenance of laboratory equipment

    International Nuclear Information System (INIS)

    Hwang, Chang Kyu; Hwang, Bong Ha; Lee, Jong Wha; Kim, Jong Kyun; Yeum, Ki Eon; Park, Myung Ku; Hong, Soon Eon; Choi, Ho Young; An, Dae Kyu; An, Choon; Park, In Won; Kim, Kyung Sik; Lee, Won Jae; Yoon, Ki Byung; Kim, Heung Woo; Lee, In Bae; Yeom, Jeong Hyun; Lee, Chul Ku; Sin, Keon Ju; Oh, Wan Ho; Seo, Yong Chil; Yang, Song Yeul; Lee, Young Soon; Choi, Byung Kwon; Chang, Kyung Duk

    1993-12-01

    This report on the manufacture and maintenance of laboratory equipment contains working contents, scope and contents of request working to the machine shop, also records the principal production design, manufacture contents and a relevant working drawing. The working content and scope of the machine shop is to support the successful and convenient performance of the R and D by manufacture and maintenance of all sorts of laboratory equipment. 11 tabs., 3 figs. (Author) .new

  20. Policy Reform Impact on Food Manufacturing

    OpenAIRE

    Celikkol, Pinar; Dunn, James W.; Stefanou, Spiro E.

    2003-01-01

    The impact of agricultural policies and their reform is of major concern when addressing issues of growth, innovation and consolidation in the food manufacturing sector. Growth is one of the forces fueling the globalization of food manufacturing activities. Market- and policy-driven forces present a myriad of opportunities to influence growth and reorientation of patterns at the nexus where food manufacturing links the food system. The productivity and international competitiveness of the foo...

  1. Manufacture and maintenance of laboratory equipment

    International Nuclear Information System (INIS)

    Kim, Jong Kyun; Hwang, Chang Kyu; Hwang, Bong Ha; Lee, Jong Wha; Yeom, Ki Eon; Park, Myung Ku; Hong, Soon Hyeon; Choi, Ho Young; An, Dae Kyu; An, Choon; Park, In Won; Kim, Kyeong Sik; Lee, In Bae; Yeom, Jeong Heon; Lee, Chul Ku; Sin, Keon Ju; Oh, Wan Ho; Choi, Byung Kwon; Chang, Kyeong Duk; Lee, Young Soon

    1995-12-01

    This report on the manufacture and maintenance of laboratory equipment contains working contents, scope and contents of a request working to the Machine Shop, also records the principal production design, manufacture contents and a relevant working drawing. The working content and scope of the Machine Shop is to support the successful and convenient performance of the Research and development by manufacture and maintenance of all sorts of laboratory equipment. 12 tabs., 5 figs. (Author) .new

  2. Exploring sustainable manufacturing principles and practices

    OpenAIRE

    Alayón, Claudia

    2016-01-01

    The manufacturing industry remains a critical force in the quest for global sustainability. An increasing number of companies are modifying their operations in favor of more sustainable practices. It is hugely important that manufacturers, irrespective of the subsector they belong to, or their organizational size, implement practices that reduce or eliminate negative environmental, social and economic impacts generated by their manufacturing operations. Consequently, scholars have called for ...

  3. TORE SUPRA vacuum vessel and shield manufacturing

    International Nuclear Information System (INIS)

    Blateyron, J.; Lepez, R.

    1984-01-01

    TORE SUPRA vacuum vessel and vacuum chamber shield manufacturing in progress at Jeumont-Schneider consists of three main phases: - Detail engineering and manufacturing fixture construction; - Prototype section manufacturing and process preparation; - Construction of the 6 production modules. The welding techniques adopted, call for three special automatic processes: TIG, MIG and PLASMA welding which guarantee mechanical strength, vacuum tightness and absence of distortion. Production of the modules began July 1984. (author)

  4. Additive Manufacturing: Ensuring Quality for Spacecraft Applications

    Science.gov (United States)

    Swanson, Theodore; Stephenson, Timothy

    2014-01-01

    Reliable manufacturing requires that material properties and fabrication processes be well defined in order to insure that the manufactured parts meet specified requirements. While this issue is now relatively straightforward for traditional processes such as subtractive manufacturing and injection molding, this capability is still evolving for AM products. Hence, one of the principal challenges within AM is in qualifying and verifying source material properties and process control. This issue is particularly critical for applications in harsh environments and demanding applications, such as spacecraft.

  5. Manufacture and maintenance of laboratory equipment

    International Nuclear Information System (INIS)

    Kim, J. K.; Whang, C. K.; Lee, J. H.; Youm, K. Y.; Hong, S. H.; Choi, H. Y.; An, C.; Park, I. W.; Kim, K. S.; Lee, W. J.; Yoon, K. B.; Kim, H. W.; Lee, I. B.; Lee, C. K.; Youm, J. H.; Oho, W. H.; Choi, B. K.; Jang, K. D.

    1996-12-01

    This report on the manufacture and maintenance of laboratory equipment contains working contents, scope and contents of a request working to the Machine Shop, also records the principal production design, manufacture contents and a relevant working drawing. The working content and scope of the Machine Shop is to support the successful and convenient performance of the R and D by manufacture and maintenance of all sorts of laboratory equipment. (author). 9 tabs., 12 figs

  6. Harnessing the Potential of Additive Manufacturing

    Science.gov (United States)

    2016-12-01

    31 Defense AT&L: November-December 2016 Harnessing the Potential of Additive Manufacturing Bill Decker Decker is director of Technology...achieve its goal of competition throughout the acquisition life cycle. When we look at additive manufacturing , we have a much different environment. To...Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion. This specification covers additively manufactured titanium-6 aluminum-4 vanadium (Ti-6Al-4V

  7. Manufacturing of NAA laboratory clean room

    International Nuclear Information System (INIS)

    Suwoto; Hasibuan, Djaruddin

    2001-01-01

    The ''NAA laboratory clean room'' has been built in the Reactor Serba Guna G.A. Siwabessy building. The erection of ''AAN laboratory clean room'' doing by started of preparation of the ''manufacturing procedure'' refer to ''Design and manufacturing neutron activation analysis clean room laboratory''. Manufacturing process and erection doing refer to procedures makes. By providing of the ''AAN laboratory clean room'' can be cocluded that the research activity and the user sevises in P2TRR well meet to be done

  8. Research overview: Advanced Manufacturing in Switzerland

    OpenAIRE

    Schärer, Claudia

    2016-01-01

    SATW is convinced that industrial production methods will see fundamental changes over the coming years. Mastering new production technologies (advanced manufacturing) such as additive manufacturing and industry 4.0 will be vital to keep Swiss production at a competitive level. New additive manufacturing processes such as 3D printing offer revolutionary opportunities and have the potential to replace traditional production methods. Industry 4.0 has seen the definition of a new concept for...

  9. Analysis of flow coefficient in chair manufacture

    OpenAIRE

    Ivković Dragoljub; Živković Slaven

    2005-01-01

    The delivery on time is not possible without the good-quality planning of deadlines, i.e. planning of the manufacturing process duration. The study of flow coefficient enables the realistic forecasting of the manufacturing process duration. This paper points to the significance of the study of flow coefficient on scientific basis so as to determine the terms of the end of the manufacture of chairs made of sawn timber. Chairs are the products of complex construction, often almost completely ma...

  10. Participative knowledge management to empower manufacturing workers

    DEFF Research Database (Denmark)

    Campatelli, Gianni; Richter, Alexander; Stocker, Alexander

    2016-01-01

    skills. In this paper, the authors suggest a participative knowledge management approach to empower manufacturing workers. Starting from a comprehensive empirical analysis of the existing work practices in a manufacturing company, the authors have developed and validated a knowledge management system...... prototype. The prototype is aimed for training, problem solving, and facilitating the discovery, acquisition, and sharing of manufacturing knowledge. The conducted evaluation of the prototype indicates that workers' skills and level of work satisfaction will increase since the knowledge management system...

  11. Cost Accounting in the Automated Manufacturing Environment

    Science.gov (United States)

    1988-06-01

    1 NAVAL POSTGRADUATE SCHOOL M terey, California 0 DTIC II ELECTE R AD%$° NO 0,19880 -- THESIS COST ACCOUNTING IN THE AUTOMATED MANUFACTURING...PROJECT TASK WORK UNIT ELEMENT NO. NO NO ACCESSION NO 11. TITLE (Include Security Classification) E COST ACCOUNTING IN THE AUTOMATED MANUFACTURING...GROUP ’" Cost Accounting ; Product Costing ; Automated Manufacturing; CAD/CAM- CIM 19 ABSTRACT (Continue on reverse if necessary and identify by blo

  12. Manufacture and maintenance of laboratory equipment

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Kyun; Hwang, Chang Kyu; Hwang, Bong Ha; Lee, Jong Wha; Yeom, Ki Eon; Park, Myung Ku; Hong, Soon Hyeon; Choi, Ho Young; An, Dae Kyu; An, Choon; Park, In Won; Kim, Kyeong Sik; Lee, In Bae; Yeom, Jeong Heon; Lee, Chul Ku; Sin, Keon Ju; Oh, Wan Ho; Choi, Byung Kwon; Chang, Kyeong Duk; Lee, Young Soon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-12-01

    This report on the manufacture and maintenance of laboratory equipment contains working contents, scope and contents of a request working to the Machine Shop, also records the principal production design, manufacture contents and a relevant working drawing. The working content and scope of the Machine Shop is to support the successful and convenient performance of the Research and development by manufacture and maintenance of all sorts of laboratory equipment. 12 tabs., 5 figs. (Author) .new.

  13. Challenges in Additive Manufacturing of Alumina

    OpenAIRE

    Gonzalez, Hugo

    2016-01-01

    Additive manufacturing is seen by many as the holy grail of manufacturing, the ability to produce parts nearly autonomously. Adding material rather than removing it would eliminate the need for expensive resources and machining. The recent expiration of key 3D printing patents has led to many advances in the field and has dramatically lowered the prices of 3D printers, making them accessible to the average individual. The one area where additive manufacturing is still in its infancy is in cer...

  14. COMPONENTS PROVISION MANAGEMENT FOR MACHINE BUILDING MANUFACTURER

    Directory of Open Access Journals (Sweden)

    Ekaterina P. Bochkareva

    2014-01-01

    Full Text Available In the paper is given an approach to themanagement of components provision formachine building manufacturer based uponinternational standards and best practicesof leading international companies. Thecomplex expertise methods are used forthe development of the proposed machinebuilding manufacturer suppliers’ operational management method. At a strategic level is proposed a tool for planning the suppliers’portfolio and a machine building manufacturer supplier development methodology.

  15. Service-Oriented Strategies for Manufacturing Firms

    DEFF Research Database (Denmark)

    Tan, Adrian; McAloone, Tim C.; Matzen, Detlef

    2009-01-01

    This chapter establishes PSS (Product/Service-Systems) approaches in the context of manufacturing firms and their existing product-oriented business. PSS can be seen as a strategy for manufacturing firms to gain competitive advantage in the market, but what market conditions and organisational......, customers and partners in business planning and strategy to reap the full benefits. Finally a path to how manufacturers can make the change from product to service-orientation is traced....

  16. Detailed design of product oriented manufacturing systems

    OpenAIRE

    Silva, Sílvio Carmo; Alves, Anabela Carvalho

    2006-01-01

    This paper presents a procedure for the detailed design and redesign of manufacturing systems within a framework of constantly fitting production system configuration to the varying production needs of products. With such an approach is achieved the design of Product Oriented Manufacturing Systems – POMS. This approach is in opposition to the fitting, before hand, of a production system to all products within a company. In this case is usual to adopt a Function Oriented Manufactur...

  17. Training for successful lean manufacturing implementation

    OpenAIRE

    Ichimura, Maki; Jahankhani, Hamid; Arunachalam, Subramaniam

    2006-01-01

    Implementing lean manufacturing is a complex and everlasting task. The workers involving in production processes are the pivot of the lean manufacturing implementation. Training is known as a vehicle to assist the implementation process. Despite awareness of the training importance, so far, a little is available to assist to organise an efficient training. This paper summarises the overview of lean manufacturing and discuss the importance of human resource within lean implementation process. ...

  18. Integrated and Intelligent Manufacturing: Perspectives and Enablers

    Directory of Open Access Journals (Sweden)

    Yubao Chen

    2017-10-01

    Full Text Available With ever-increasing market competition and advances in technology, more and more countries are prioritizing advanced manufacturing technology as their top priority for economic growth. Germany announced the Industry 4.0 strategy in 2013. The US government launched the Advanced Manufacturing Partnership (AMP in 2011 and the National Network for Manufacturing Innovation (NNMI in 2014. Most recently, the Manufacturing USA initiative was officially rolled out to further “leverage existing resources... to nurture manufacturing innovation and accelerate commercialization” by fostering close collaboration between industry, academia, and government partners. In 2015, the Chinese government officially published a 10-year plan and roadmap toward manufacturing: Made in China 2025. In all these national initiatives, the core technology development and implementation is in the area of advanced manufacturing systems. A new manufacturing paradigm is emerging, which can be characterized by two unique features: integrated manufacturing and intelligent manufacturing. This trend is in line with the progress of industrial revolutions, in which higher efficiency in production systems is being continuously pursued. To this end, 10 major technologies can be identified for the new manufacturing paradigm. This paper describes the rationales and needs for integrated and intelligent manufacturing (i2M systems. Related technologies from different fields are also described. In particular, key technological enablers, such as the Internet of Things and Services (IoTS, cyber-physical systems (CPSs, and cloud computing are discussed. Challenges are addressed with applications that are based on commercially available platforms such as General Electric (GE’s Predix and PTC’s ThingWorx.

  19. Prepreg effects on honeycomb composite manufacturing

    Science.gov (United States)

    Martin, Cary Joseph

    Fiber reinforced composites offer many advantages over traditional materials and are widely utilized in aerospace applications. Advantages include a high stiffness to weight ratio and excellent fatigue resistance. However, the pace of new implementation is slow. The manufacturing processes used to transform composite intermediates into final products are poorly understood and are a source of much variability. This limits new implementation and increases the manufacturing costs of existing designs. One such problem is honeycomb core crush, in which a core-stiffened structure collapses during autoclave manufacture, making the structure unusable and increasing the overall manufacturing cost through increased scrap rates. Consequently, the major goal of this research was to investigate the scaling of core crush from prepreg process-structure-property relations to commercial composite manufacture. The material dependent nature of this defect was of particular interest. A methodology and apparatus were developed to measure the frictional resistance of prepreg materials under typical processing conditions. Through a characterization of commercial and experimental prepregs, it was found that core crush behavior was the result of differences in prepreg frictional resistance. This frictional resistance was related to prepreg morphology and matrix rheology and elasticity. Resin composition and prepreg manufacturing conditions were also found to affect manufacturing behavior. Mechanical and dimensional models were developed and demonstrated utility for predicting this crushing behavior. Collectively, this work explored and identified the process-structure-property relations as they relate to the manufacture of composite materials and suggested several avenues by which manufacturing-robust materials may be developed.

  20. Advanced Manufacturing Technologies (AMT): Composites Integrated Modeling

    Data.gov (United States)

    National Aeronautics and Space Administration — The Composites Integrated Modeling (CIM) Element developed low cost, lightweight, and efficient composite structures, materials and manufacturing technologies with...

  1. Manufacturing of superconductive silver/ceramic composites

    DEFF Research Database (Denmark)

    Seifi, Behrouz; Bech, Jakob Ilsted; Eriksen, Morten

    2000-01-01

    Manufacturing of superconducting metal/ceramic composites is a rather new discipline within materials forming processes. High Temperature SuperConductors, HTSC, are manufactured applying the Oxide-Powder-In-Tube process, OPIT. A ceramic powder containing lead, calcium, bismuth, strontium, and cop......Manufacturing of superconducting metal/ceramic composites is a rather new discipline within materials forming processes. High Temperature SuperConductors, HTSC, are manufactured applying the Oxide-Powder-In-Tube process, OPIT. A ceramic powder containing lead, calcium, bismuth, strontium...

  2. Inside-Out Manufacturing of Composite Structures

    Data.gov (United States)

    National Aeronautics and Space Administration — Tooling for the manufacture of large structures from composite materials often costs much more than individual parts, rendering the processes unattractive for...

  3. Rapid Response Manufacturing (RRM). Final CRADA report

    Energy Technology Data Exchange (ETDEWEB)

    Cain, W.D. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Waddell, W.L. [National Centers for Manufacturing Sciences, Ann Arbor, MI (United States)

    1997-08-28

    A major accomplishment of the Rapid Response Manufacturing (RRM) project was the development of a broad-based generic framework for automating and integrating the design-to-manufacturing activities associated with machined part products. Key components of the framework are a manufacturing model that integrates product and process data in a consistent, minimally redundant manner, an advanced computer-aided engineering working environment, knowledge-based software systems for design, process planning, and manufacturing and new production technologies for making products directly from design application software.

  4. Economic benefits of metrology in manufacturing

    DEFF Research Database (Denmark)

    Savio, Enrico; De Chiffre, Leonardo; Carmignato, S.

    2016-01-01

    examples from industrial production, in which the added value of metrology in manufacturing is discussed and quantified. Case studies include: general manufacturing, forging, machining, and related metrology. The focus of the paper is on the improved effectiveness of metrology when used at product...... and process design stages, as well as on the improved accuracy and efficiency of manufacturing through better measuring equipment and process chains with integrated metrology for process control.......In streamlined manufacturing systems, the added value of inspection activities is often questioned, and metrology in particular is sometimes considered only as an avoidable expense. Documented quantification of economic benefits of metrology is generally not available. This work presents concrete...

  5. Coordinating knowledge transfer within manufacturing networks

    DEFF Research Database (Denmark)

    Yang, Cheng; Johansen, John; Boer, Harry

    2008-01-01

    Along with increasing globalization, the management of international manufacturing networks is becoming increasingly important for industrial companies. This paper mainly focuses on the coordination of knowledge transfer within manufacturing networks. In this context, we propose the time......-place matrix as a tool for mapping the distribution of knowledge within manufacturing networks. Using this tool, four important questions about the coordination of knowledge transfer within a manufacturing network are identified: know-where, know-what, know-when, know-how to transfer. The relationships among...

  6. Increase of manufacturability of manufacturing of difficult profile details

    Directory of Open Access Journals (Sweden)

    О.Ye. Semenovskiy

    2017-12-01

    Full Text Available The analysis of existing problems arising in the process of manufacturing such complex profile parts as gears is carried out. The possible ways of simplifying the technological processes with the aim of improving the economic performance of production, as well as reducing the defect are defined. The carried out researches of influence of chemical composition of steel, its structural parameters on technological characteristics. The choice of compositions of the chemical composition of steel with the optimal ratio of physical-mechanical and technological characteristics is substantiated. The causes of deformation of parts in the process of heat treatment are established. The developed criteria for estimating this value. At the same time, the task of not only qualitative but also quantitative evaluation of such technological properties as the propensity of steels to deformation in the course of chemical-thermal treatment is solved, with the aim of introducing a single characteristic that determines the tendency of the steel to deform during hardening. Reducing the propensity of steel to deformation allowed to increase the economic performance of production by reducing the number of finishing operations.

  7. Praxis, subjectivity and sense

    Directory of Open Access Journals (Sweden)

    Alfredo Gómez-Muller

    2006-07-01

    Full Text Available A primordial aspect of the Sartrian critique of alienation concerns understanding the analytic ideology as the domination of materiality over the symbolic, in other words as the reification of the human, and therefore as anticulture. In the context of contemporary nihilism, the decoding of the mechanisms which consign praxis to the practico-inert requires a critique of the relations between the social sciences and philosophy, which in its turn implies a new theory of the relation between what Sartre calls the "notion" (the area of subjectivity and the "concept" (objectivity, From this perspective, the deconstruction of the established frontiers between the social sciences and philosophy, and between the conceptual and the narrative, is corelative to a redefinition of the relation between theory and practice.

  8. Interview without a subject

    DEFF Research Database (Denmark)

    Rittenhofer, Iris

    2010-01-01

    This article contributes to the rethinking of qualitative interview research into intercultural issues. It suggests that the application of poststructuralist thought should not be limited to the analysis of the interview material itself, but incorporate the choice of interviewees and the modalities...... for the accomplishment of interviews. The paper focuses on a discussion of theoretical and methodological considerations of design, approach and research strategy. These discussions are specified in relation to a project on gender and ethnicity in cultural encounters at Universities. In the paper, I introduce a research...... design named Cultural interviewing, present an approach to the design of interviews named Interview without a subject, and offer an analytic strategy directed towards the analysis of interview transcripts named Interview on the level of the signifier. The paper concludes that even though it is relevant...

  9. In-Space Manufacturing Project (prior to FY15: Additive Manufacturing Technology Development)

    Data.gov (United States)

    National Aeronautics and Space Administration — The In-Space Manufacturing (ISM) project is responsible for developing the manufacturing capabilities that will provide on-demand, sustainable operations during NASA...

  10. Subcontracting in electronics : from contract manufacturers to providers of electronic manufacturing services (EMS)

    OpenAIRE

    Liemt van, Gijsbert

    2007-01-01

    Discusses how the top contract manufacturers in the electronics industry try to become providers of electronic manufacturing services by deepening and broadening the rage of services that they offer and by diversifying into markets other than computing and telecommunications.

  11. Manufacturing footprint optimisation: a necessity for manufacturing network in changing business environment

    DEFF Research Database (Denmark)

    Yang, Cheng; Farooq, Sami; Johansen, John

    2010-01-01

    Facing the unpredictable financial crisis, optimising the footprint can be the biggest and most important transformation a manufacturer can undertake. In order to realise the optimisation, fundamental understanding on manufacturing footprint is required. Different elements of manufacturing...... footprint have been investigated independently in the existing literature. In this paper, for the purpose of relationship exploration between different elements, manufacturing footprints of three industrial companies are traced historically. Based on them, four reasons for the transformation...

  12. Advanced Manufacturing Technologies (AMT): Additive Manufactured Hot Fire Planning and Testing in GRC Cell 32 Project

    Science.gov (United States)

    Fikes, John C.

    2014-01-01

    The objective of this project is to hot fire test an additively manufactured thrust chamber assembly TCA (injector and thrust chamber). GRC will install the additively manufactured Inconel 625 injector, two additively manufactured (SLM) water cooled Cu-Cr thrust chamber barrels and one additively manufactured (SLM) water cooled Cu-Cr thrust chamber nozzle on the test stand in Cell 32 and perform hot fire testing of the integrated TCA.

  13. Strategic research on the sustainable development cost of manufacturing industry under the background of carbon allowance and trade policy

    Science.gov (United States)

    Ma, Zhongmin; Cheng, Mengting; Wang, Mei

    2017-08-01

    The important subjects of energy consumption and carbon emission are manufacturing enterprises, with the deepening of international cooperation, and the implementation of carbon limit and trade policy, costs of manufacturing industry will rise sharply. How can the manufacturing industry survive in this reform, and it has to be a problem that the managers of the manufacturing industry need to solve. This paper analyses sustainable development cost connotation and value basis on the basis of sustainable development concept, discusses the influence of carbon allowance and trade policy for cost strategy of manufacturing industry, thinks that manufacturing industry should highlight social responsibility and realize maximization of social value, implement cost strategy the sustainable development, and pointed out the implementation way.

  14. Manufacturability of compact synchrotron mirrors

    Science.gov (United States)

    Douglas, Gary M.

    1997-11-01

    While many of the government funded research communities over the years have put their faith and money into increasingly larger synchrotrons, such as Spring8 in Japan, and the APS in the United States, a viable market appears to exist for smaller scale, research and commercial grade, compact synchrotrons. These smaller, and less expensive machines, provide the research and industrial communities with synchrotron radiation beamline access at a portion of the cost of their larger and more powerful counterparts. A compact synchrotron, such as the Aurora-2D, designed and built by Sumitomo Heavy Industries, Ltd. of japan (SHI), is a small footprint synchrotron capable of sustaining 20 beamlines. Coupled with a Microtron injector, with 150 MeV of injection energy, an entire facility fits within a 27 meter [88.5 ft] square floorplan. The system, controlled by 2 personal computers, is capable of producing 700 MeV electron energy and 300 mA stored current. Recently, an Aurora-2D synchrotron was purchased from SHI by the University of Hiroshima. The Rocketdyne Albuquerque Operations Beamline Optics Group was approached by SHI with a request to supply a group of 16 beamline mirrors for this machine. These mirrors were sufficient to supply 3 beamlines for the Hiroshima machine. This paper will address engineering issues which arose during the design and manufacturing of these mirrors.

  15. Manufacturing microporous membrane by polymerisation

    International Nuclear Information System (INIS)

    Tanny, G.B.

    1984-01-01

    The starting materials for the practice of the present invention are (1) one or more organic monomers or oligomers which upon irradiation very rapidly undergo a polymerization reaction to form a solid polymer; and (2) a liquid vehicle in which the one or more organic monomers or oligomers are soluble but in which the polymer formed is insoluble. For the manufacture of microporous membrane in accordance with the invention the monomers or oligomers are dissolved in the liquid vehicle, the resulting solution is formed into a thin layer, and the thin layer of the solution is then irradiated as with ultraviolet or electron beam radiation whereupon the rapid polymerization reaction immediately ensues and the polymer formed immediately segregates from the vehicle thereby resulting in microporous membrane from which the vehicle can be removed as by evaporation or washing. Because the radiation-induced polymerization reaction and the segregation of the polymer formed are so rapid, the membrane formed has cells and communications therebetween of very small dimensions thereby providing the microporous structure. Where ultra-violet radiation is used the solution also includes a photo-initiator. (author)

  16. Dynamics of ultrasonic additive manufacturing.

    Science.gov (United States)

    Hehr, Adam; Dapino, Marcelo J

    2017-01-01

    Ultrasonic additive manufacturing (UAM) is a solid-state technology for joining similar and dissimilar metal foils near room temperature by scrubbing them together with ultrasonic vibrations under pressure. Structural dynamics of the welding assembly and work piece influence how energy is transferred during the process and ultimately, part quality. To understand the effect of structural dynamics during UAM, a linear time-invariant model is proposed to relate the inputs of shear force and electric current to resultant welder velocity and voltage. Measured frequency response and operating performance of the welder under no load is used to identify model parameters. Using this model and in-situ measurements, shear force and welder efficiency are estimated to be near 2000N and 80% when welding Al 6061-H18 weld foil, respectively. Shear force and welder efficiency have never been estimated before in UAM. The influence of processing conditions, i.e., welder amplitude, normal force, and weld speed, on shear force and welder efficiency are investigated. Welder velocity was found to strongly influence the shear force magnitude and efficiency while normal force and weld speed showed little to no influence. The proposed model is used to describe high frequency harmonic content in the velocity response of the welder during welding operations and coupling of the UAM build with the welder. Copyright © 2016 Elsevier B.V. All rights reserved.

  17. CORRECTIVE ACTION IN CAR MANUFACTURING

    Directory of Open Access Journals (Sweden)

    H. Rohne

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: In this paper the important .issues involved in successfully implementing corrective action systems in quality management are discussed. The work is based on experience in implementing and operating such a system in an automotive manufacturing enterprise in South Africa. The core of a corrective action system is good documentation, supported by a computerised information system. Secondly, a systematic problem solving methodology is essential to resolve the quality related problems identified by the system. In the following paragraphs the general corrective action process is discussed and the elements of a corrective action system are identified, followed by a more detailed discussion of each element. Finally specific results from the application are discussed.

    AFRIKAANSE OPSOMMING: Belangrike oorwegings by die suksesvolle implementering van korrektiewe aksie stelsels in gehaltebestuur word in hierdie artikel bespreek. Die werk is gebaseer op ondervinding in die implementering en bedryf van so 'n stelsel by 'n motorvervaardiger in Suid Afrika. Die kern van 'n korrektiewe aksie stelsel is goeie dokumentering, gesteun deur 'n gerekenariseerde inligtingstelsel. Tweedens is 'n sistematiese probleemoplossings rnetodologie nodig om die gehalte verwante probleme wat die stelsel identifiseer aan te spreek. In die volgende paragrawe word die algemene korrektiewe aksie proses bespreek en die elemente van die korrektiewe aksie stelsel geidentifiseer. Elke element word dan in meer besonderhede bespreek. Ten slotte word spesifieke resultate van die toepassing kortliks behandel.

  18. Dimensionless numbers in additive manufacturing

    Science.gov (United States)

    Mukherjee, T.; Manvatkar, V.; De, A.; DebRoy, T.

    2017-02-01

    The effects of many process variables and alloy properties on the structure and properties of additively manufactured parts are examined using four dimensionless numbers. The structure and properties of components made from 316 Stainless steel, Ti-6Al-4V, and Inconel 718 powders for various dimensionless heat inputs, Peclet numbers, Marangoni numbers, and Fourier numbers are studied. Temperature fields, cooling rates, solidification parameters, lack of fusion defects, and thermal strains are examined using a well-tested three-dimensional transient heat transfer and fluid flow model. The results show that lack of fusion defects in the fabricated parts can be minimized by strengthening interlayer bonding using high values of dimensionless heat input. The formation of harmful intermetallics such as laves phases in Inconel 718 can be suppressed using low heat input that results in a small molten pool, a steep temperature gradient, and a fast cooling rate. Improved interlayer bonding can be achieved at high Marangoni numbers, which results in vigorous circulation of liquid metal, larger pool dimensions, and greater depth of penetration. A high Fourier number ensures rapid cooling, low thermal distortion, and a high ratio of temperature gradient to the solidification growth rate with a greater tendency of plane front solidification.

  19. Knowledge Transfer in International Manufacturing Networks

    DEFF Research Database (Denmark)

    Madsen, Erik Skov

    This paper is built around eight longitudinal case studies of knowledge transfer in manufacturing relocation. The paper introduces a model designed to identify knowledge in relation to four task situations on the shop floor in a manufacturing environment. Explicit and tacit knowledge are introduced....... Finally, the paper discusses how “dispatching capacity” and “absorptive capacity” can improve the process....

  20. Automation and Integration in Semiconductor Manufacturing

    OpenAIRE

    Liao, Da-Yin

    2010-01-01

    Semiconductor automation originates from the prevention and avoidance of frauds in daily fab operations. As semiconductor technology and business continuously advance and grow, manufacturing systems must aggressively evolve to meet the changing technical and business requirements in this industry. Semiconductor manufacturing has been suffering pains from islands of automation. The problems associated with these systems are limited

  1. Additive Manufacturing of Biomaterials, Tissues, and Organs

    NARCIS (Netherlands)

    Zadpoor, Amir A; Malda, Jos

    2017-01-01

    The introduction of additive manufacturing (AM), often referred to as three-dimensional (3D) printing, has initiated what some believe to be a manufacturing revolution, and has expedited the development of the field of biofabrication. Moreover, recent advances in AM have facilitated further

  2. Additive Manufacturing of Biomaterials, Tissues, and Organs

    NARCIS (Netherlands)

    Zadpoor, Amir A; Malda, Jos|info:eu-repo/dai/nl/412461099

    The introduction of additive manufacturing (AM), often referred to as three-dimensional (3D) printing, has initiated what some believe to be a manufacturing revolution, and has expedited the development of the field of biofabrication. Moreover, recent advances in AM have facilitated further

  3. Lean and psychosocial work environment in manufacturing

    DEFF Research Database (Denmark)

    Edwards, Kasper; Thye, Nina; Nielsen, Anders P.

    2011-01-01

    Lean is currently the rationalization method of choice in the Danish manufacturing industry. This paper reports finding from three lean implementation cases. All cases are manufacturing companies focusing on upmarket products produced in small series. Prior to lean production was organized as sel...

  4. Technological Impacts: Manufacturing and the Economy

    Science.gov (United States)

    Childress, Vincent W.

    2012-01-01

    For the past two decades, and recently with the economic recession, the media has emphasized the decline of manufacturing in the United States and other developed countries. In the U.S., some initially blamed the North American Free Trade Agreement (NAFTA) for this decline. Hearing that manufacturing is on the decline, one might reason that its…

  5. Challenges in Teaching Modern Manufacturing Technologies

    Science.gov (United States)

    Ngaile, Gracious; Wang, Jyhwen; Gau, Jenn-Terng

    2015-01-01

    Teaching of manufacturing courses for undergraduate engineering students has become a challenge due to industrial globalisation coupled with influx of new innovations, technologies, customer-driven products. This paper discusses development of a modern manufacturing course taught concurrently in three institutions where students collaborate in…

  6. Organizational Considerations for Advanced Manufacturing Technology

    Science.gov (United States)

    DeRuntz, Bruce D.; Turner, Roger M.

    2003-01-01

    In the last several decades, the United States has experienced a decline in productivity, while the world has seen a maturation of the global marketplace. Nations have moved manufacturing strategy and process technology issues to the top of management priority lists. The issues surrounding manufacturing technologies and their implementations have…

  7. Manufacturing Capital Lingers in the Stock Market

    Institute of Scientific and Technical Information of China (English)

    吴程涛; 段铸; 张景宇; 张曙光

    2008-01-01

    Pressured by a slowdown in exports, cost increases and dwindling returns to manufacturing investments, China’s manufacturing capital has begun to shift to the real-estate and stock markets. As a matter of fact, the stock market had already felt a shock a couple of years ago when top domestic manufacturers like Midea, Gree, TCL and LMZ started to invest their idle capital in the real-estate and stock markets. Investments of manufacturing capital in both the real estate and stock markets have increased fluid capital and pushed up the value of both markets. Booms in both markets have in turn guaranteed investment returns of manufacturing capital, which further increased the stock market valuations of manufacturing capital. Such a cycle has created interest chains between listed manufacturers, the stock market and the real-estate market. Along with the ups and downs of the stock and real-estate markets, manufacturing capital now faces a dilemma: to escape or to persist? Where should it escape? When can the markets be profitable again? Just like the classic Shakespearean question: to be or not to be, that is the question.

  8. Additive Manufacturing for Low Volume Bearings

    Energy Technology Data Exchange (ETDEWEB)

    Tate, John G. [Schaeffler Group USA, Spartanburg, SC (United States); Richardson, Bradley S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Love, Lonnie J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-09-01

    ORNL worked with the Schaeffler Group USA to explore additive manufacturing techniques that might be appropriate for prototyping of bearing cages. Multiple additive manufacturing techniques were investigated, including e-beam, binder jet and multiple laser based processes. The binder jet process worked best for the thin, detailed cages printed.

  9. Manufacturing technology for practical Josephson voltage normals

    International Nuclear Information System (INIS)

    Kohlmann, Johannes; Kieler, Oliver

    2016-01-01

    In this contribution we present the manufacturing technology for the fabrication of integrated superconducting Josephson serial circuits for voltage normals. First we summarize some foundations for Josephson voltage normals and sketch the concept and the setup of the circuits, before we describe the manufacturing technology form modern practical Josephson voltage normals.

  10. Low-cost solar module manufacturing

    International Nuclear Information System (INIS)

    Little, Roger G.; Nowlan, Michael J.; Matthei, Keith W.; Darkazalli, Ghazi

    1997-01-01

    As the market for terrestrial photovoltaic modules expands beyond the 80 MW per year level, module manufacturers are adopting a number of cost-reduction strategies, including the use of higher throughput equipment, increased process automation, and the fabrication of larger area cells and modules. This paper reviews recent activities at Spire Corporation in the development of advanced module manufacturing and testing equipment

  11. Finding phosphorus containing additives in manufactured foods

    Directory of Open Access Journals (Sweden)

    Lyn Lloyd

    2012-06-01

    This reflects manufactured foods in NZ and it is likely that these results could be generalized to countries with similar food patterns and supplies. Quantitative data in manufactured foods is unlikely to be available to guide patient choice so qualitative information of where to find P additives can be helpful.

  12. Manufacturing processes 2 grinding, honing, lapping

    CERN Document Server

    Klocke, Fritz

    2009-01-01

    Presents a view of the most common machining and non-machining manufacturing processes. This volume describes the characteristics of abrasive tools, their design and manufacturing, followed by the fundamentals of grinding fluids. It also discusses grinding of different materials (steel, cast iron, hard and brittle materials, nickel and titanium).

  13. Manufacturing Capacity Utilization and Industrial Development in ...

    African Journals Online (AJOL)

    FIRST LADY

    utilization in the late 1970s was as high as 78.70 percent and nosedived to as low as 43.80 percent in the 1980s. Between ... through a regime of high inflation rate which makes domestic manufacturers and domestic market ... However, inflation and loans and advances to manufacturing were found to have negative effect.

  14. Research Staff | Advanced Manufacturing Research | NREL

    Science.gov (United States)

    manages wind turbine rotor blade composite manufacturing projects at the National Wind Technology Center postdoctoral researcher working to develop and validate advanced composite manufacturing processes using novel materials for wind and marine and hydrokinetic (MHK) turbines. This includes hands-on composite

  15. Quality and workflow integration in flexible manufacturing

    NARCIS (Netherlands)

    ten Dam, Dennis

    2012-01-01

    In recognising the relevance of production networks and flexible manufacturing, CNC Worknet aims to be a company that approaches the new era of flexible manufacturing by developing a novel business model that combines the technologies of e-Business with production networks. This business model is

  16. Additive manufacturing: From implants to organs

    African Journals Online (AJOL)

    Additive manufacturing (AM) constructs 3D objects layer by layer under computer control from 3D models. 3D printing is one ... anatomical models for surgery planning, and design and construction ... production of implants, particularly to replace bony structures, is ... Manufactured organs are, however, an elusive goal.

  17. CANDU fuel : design/manufacturing interaction

    International Nuclear Information System (INIS)

    Graham, N.A.

    1999-01-01

    The design of CANDU fuel has been the product of intense cooperation among fuel designers and fuel manufacturers. The developments of some of the novel processes in fuel manufacture are outlined. These include the brazed-split-spacer design, the resistance welded endcap and CANLUB coatings. (author)

  18. Optimization of inventory management in furniture manufacturing

    OpenAIRE

    Karkauskas, Justinas

    2017-01-01

    Aim of research - to present inventory management optimization guidelines for furniture manufacturing company, based on analysis of scientific literature and empirical research. Tasks of the Issue: • Disclose problems of inventory management in furniture manufacturing sector; • To analyze theoretical inventory management decisions; • To develop theoretical inventory management optimization model; • Do empirical research of inventory management and present offers for optimizatio...

  19. Advanced Manufacturing Office Clean Water Processing Technologies

    Energy Technology Data Exchange (ETDEWEB)

    None

    2018-03-01

    The DOE Office of Energy Efficiency and Renewable Energy (EERE)’s Advanced Manufacturing Office partners with industry, small business, universities, and other stakeholders to identify and invest in emerging technologies with the potential to create high-quality domestic manufacturing jobs and enhance the global competitiveness of the United States.

  20. Photonic crystal scintillators and methods of manufacture

    Science.gov (United States)

    Torres, Ricardo D.; Sexton, Lindsay T.; Fuentes, Roderick E.; Cortes-Concepcion, Jose

    2015-08-11

    Photonic crystal scintillators and their methods of manufacture are provided. Exemplary methods of manufacture include using a highly-ordered porous anodic alumina membrane as a pattern transfer mask for either the etching of underlying material or for the deposition of additional material onto the surface of a scintillator. Exemplary detectors utilizing such photonic crystal scintillators are also provided.