WorldWideScience

Sample records for subject areas engineering

  1. Ice Engineering Research Area

    Data.gov (United States)

    Federal Laboratory Consortium — Refrigerated Physical Modeling of Waterways in a Controlled EnvironmentThe Research Area in the Ice Engineering Facility at the Cold Regions Research and Engineering...

  2. Small Engine & Accessory Test Area

    Data.gov (United States)

    Federal Laboratory Consortium — The Small Engine and Accessories Test Area (SEATA) facilitates testaircraft starting and auxiliary power systems, small engines and accessories. The SEATA consists...

  3. Subject Gateway Sites and Search Engine Ranking.

    Science.gov (United States)

    Thelwall, Mike

    2002-01-01

    Discusses subject gateway sites and commercial search engines for the Web and presents an explanation of Google's PageRank algorithm. The principle question addressed is the conditions under which a gateway site will increase the likelihood that a target page is found in search engines. (LRW)

  4. Foveal avascular zone area in normal subjects

    Directory of Open Access Journals (Sweden)

    Chang Xu

    2017-03-01

    Full Text Available AIM: To measure the foveal avascular zone(FAZarea and to investigate the characteristics of the FAZ area in normal eyes, using optical coherence tomography(OCTangiography.METHODS: This was a cross-sectional study. The FAZ area was measured in 69 participants, for a total of 138 eyes, using RTVue-100 OCT. The relations between the FAZ area and the potential factors were evaluated by univariate and multivariate linear regression analysis. Differences between the right and left eyes were calculated, and values were compared by means of a paired t test. Pearson correlation analysis was performed to assess the relationships of the FAZ area between the right and left eyes. RESULTS: The mean FAZ area was 0.30±0.11mm2 in all subjects. For the male subjects, the mean FAZ area was 0.29±0.13mm2, and for the female subjects 0.31±0.09mm2, with no significant difference(t=-1.346,P=0.180. The FAZ area did not correlate with all the potential factors. The mean FAZ area in the right eye was 0.30±0.11mm2, and in the left eye was 0.30±0.10mm2,with no significant difference(P=0.943. There was a strong correlation between the right and left eyes for the FAZ area. CONCLUSION: OCT angiography is a noninvasive method of visualizing and measuring the FAZ area in normal subjects. The FAZ area does not correlate with old age, sex and other factors. It shows significant interocular symmetry in normal subjects.

  5. Local Development of Subject Area Item Banks.

    Science.gov (United States)

    Ward, Annie W.; Barlow, Gene

    1984-01-01

    It is feasible for school districts to develop and use subject area tests as reliable as those previously available only from commercial publishers. Three projects in local item development in a large school district are described. The first involved only Algebra 1. The second involved life science and career education at the elementary level; and…

  6. Acquisition in different and special subject areas

    CERN Document Server

    Katz, Linda S

    2013-01-01

    Learn how acquisitions librarians successfully serve specialized users! In this book, you'll find profiles, methods, and processes for acquisitions in specialized subject areas, such as local and regional poetry, oceanography, educational information in electronic formats, popular fiction, regional and ethnic materials, and more. Seasoned acquisitions librarians share their experiences in gathering the hard-to-find materials their libraries' highly specialized clients need to access. You'll also examine issues surrounding the acquisition of new reference tools that are vital in today's emergi

  7. Human subject research for engineers a practical guide

    CERN Document Server

    de Winter, Joost C F

    2017-01-01

    This Brief introduces engineers to the main principles in ethics, research design, statistics, and publishing of human subject research. In recent years, engineering has become strongly connected to disciplines such as biology, medicine, and psychology. Often, engineers (and engineering students) are expected to perform human subject research. Typical human subject research topics conducted by engineers include human-computer interaction (e.g., evaluating the usability of software), exoskeletons, virtual reality, teleoperation, modelling of human behaviour and decision making (often within the framework of ‘big data’ research), product evaluation, biometrics, behavioural tracking (e.g., of work and travel patterns, or mobile phone use), transport and planning (e.g., an analysis of flows or safety issues), etc. Thus, it can be said that knowledge on how to do human subject research is indispensable for a substantial portion of engineers. Engineers are generally well trained in calculus and mechanics, but m...

  8. Electronics Engineering Department Thrust Area report FY'84

    Energy Technology Data Exchange (ETDEWEB)

    Minichino, C.; Phelps, P.L. (eds.)

    1984-01-01

    This report describes the work of the Electronics Engineering Department Thrust Areas for FY'84: diagnostics and microelectronic engineering; signal and control engineering; microwave and pulsed power engineering; computer-aided engineering; engineering modeling and simulation; and systems engineering. For each Thrust Area, an overview and a description of the goals and achievements of each project is provided.

  9. Introducing Water-Treatment Subjects into Chemical Engineering Education.

    Science.gov (United States)

    Caceres, L.; And Others

    1992-01-01

    Proposes that inclusion of waste water treatment subjects within the chemical engineering curriculum can provide students with direct access to environmental issues from both a biotechnological and an ethical perspective. The descriptive details of water recycling at a copper plant and waste water stabilization ponds exemplify this approach from…

  10. How Many Hours of Instruction Are Needed for Students to Become Competent in Engineering Subjects?

    Science.gov (United States)

    Perdigones, Alicia; Benedicto, Susana; Sánchez-Espinosa, Elvira; Gallego, Eutiquio; García, José L.

    2014-01-01

    The aim of this work was to compare the curricula of three different agricultural engineering courses and to determine the competence of graduating students in three subject areas in order to identify possible shortfalls in the number of hours of instruction (HI) required for full competence to be attained. A total of 132 students sat a voluntary…

  11. Prediction of UHPFRC panels thickness subjected to aircraft engine impact

    OpenAIRE

    Thai, Duc-Kien; Kim, Seung-Eock

    2016-01-01

    In the practical design of nuclear building structures subjected to an aircraft crash, the structures are required to prevent scabbing and perforation. NEI 07-13 provided the formulas to predict the minimum reinforced concrete (RC) wall thickness to prevent the local damage caused by aircraft engine impact. However, these formulas may not be suitable for predicting the thickness of the ultra-high performance fiber reinforced concrete (UHPFRC) wall. In this study, the local damage of a UHPFRC ...

  12. METHODS OF TEACHING GRAPHICAL SUBJECTS TO BUILDING SERVICES ENGINEERING PROGRAM

    Directory of Open Access Journals (Sweden)

    MÂRZA Carmen

    2012-09-01

    Full Text Available After making a general presentation of the structure of graphical subjects from the curricula of the Building Services Engineering field, the authors elaborate on aspects related to the undergraduates’ instruction and training in drawings for specialty materials. The present paper presents comparatively the representation of the heating installations of a flat in 2 D, and 3D respectively, with the related software.

  13. 100 Areas technical activities report, engineers - March 1951

    Energy Technology Data Exchange (ETDEWEB)

    1951-04-01

    This is the monthly 100 areas technical activities report from the engineering division for the month of March 1951. It reports on engineering activities related directly to the different production reactors, and gives progress reports on various engineering projects which are in development by the engineering group.

  14. Industrial Engineering Higher Education in the European Area (EHEA)

    National Research Council Canada - National Science Library

    Marin-Garcia, Juan A; Lloret, Jaime

    2011-01-01

    Purpose: We present the state of the art of industrial engineering higher education in the European area and we describe the submitted works to the special issue "Rethinking Industrial Engineering Higher...

  15. Verification of geological/engineering model in waterflood areas

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, B.; Szpakiewicz, M.; Honarpour, M.; Schatzinger, R.A.; Tillman, R.

    1988-12-01

    The construction of a detailed geological/engineering model is the basis for development of the methodology for characterizing reservoir heterogeneity. The NIPER geological/engineering model is the subject of this report. The area selected for geological and production performance studies is a four-section area within the Powder River Basin which includes the Tertiary Incentive Project (TIP) pilot. Log, well test, production, and core data were acquired for construction of the geological model of a barrier island reservoir. In this investigation, emphasis was on the synthesis and quantification of the abundant geological information acquired from the literature and field studies (subsurface and outcrop) by mapping the geological heterogeneities that influence fluid flow. The geological model was verified by comparing it with the exceptionally complete production data available for Bell Creek field. This integration of new and existing information from various geological, geophysical, and engineering disciplines has enabled better definition of the heterogeneities that influence production during different recovery operations. 16 refs., 26 figs., 6 tabs.

  16. Engineering Research, Development and Technology, FY95: Thrust area report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through their collaboration with US industry in pursuit of the most cost-effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where they can establish unique competencies, and (2) conduct high-quality research and development to enhance their capabilities and establish themselves as the world leaders in these technologies. To focus Engineering`s efforts, technology thrust areas are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1995. The report provides timely summaries of objectives methods, and key results from eight thrust areas: computational electronics and electromagnetics; computational mechanics; microtechnology; manufacturing technology; materials science and engineering; power conversion technologies; nondestructive evaluation; and information engineering.

  17. Encouraging the learning of hydraulic engineering subjects in agricultural engineering schools

    Science.gov (United States)

    Rodríguez Sinobas, Leonor; Sánchez Calvo, Raúl

    2014-09-01

    Several methodological approaches to improve the understanding and motivation of students in Hydraulic Engineering courses have been adopted in the Agricultural Engineering School at Technical University of Madrid. During three years student's progress and satisfaction have been assessed by continuous monitoring and the use of 'online' and web tools in two undergraduate courses. Results from their application to encourage learning and communication skills in Hydraulic Engineering subjects are analysed and compared to the initial situation. Student's academic performance has improved since their application, but surveys made among students showed that not all the methodological proposals were perceived as beneficial. Their participation in the 'online', classroom and reading activities was low although they were well assessed.

  18. Thrust Area Report, Engineering Research, Development and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R. T.

    1997-02-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the knowledge base, process technologies, specialized equipment, tools and facilities to support current and future LLNL programs. Engineering`s efforts are guided by a strategy that results in dual benefit: first, in support of Department of Energy missions, such as national security through nuclear deterrence; and second, in enhancing the nation`s economic competitiveness through our collaboration with U.S. industry in pursuit of the most cost- effective engineering solutions to LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) identify key technologies relevant to LLNL programs where we can establish unique competencies, and (2) conduct high-quality research and development to enhance our capabilities and establish ourselves as the world leaders in these technologies. To focus Engineering`s efforts technology {ital thrust areas} are identified and technical leaders are selected for each area. The thrust areas are comprised of integrated engineering activities, staffed by personnel from the nine electronics and mechanical engineering divisions, and from other LLNL organizations. This annual report, organized by thrust area, describes Engineering`s activities for fiscal year 1996. The report provides timely summaries of objectives, methods, and key results from eight thrust areas: Computational Electronics and Electromagnetics; Computational Mechanics; Microtechnology; Manufacturing Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; and Information Engineering. Readers desiring more information are encouraged to contact the individual thrust area leaders or authors. 198 refs., 206 figs., 16 tabs.

  19. Subject Access on Internet: Highlights of the Metasearch Engines

    Directory of Open Access Journals (Sweden)

    Wendy Tan

    1998-09-01

    Full Text Available 無Metasearch engines can facilitate Internet searchers to retrieve useful results in an efficient way. How do these search tools differ from the index search engines? This article examines ten popular engines and provides some tips for using them.

  20. On spacecraft maneuvers control subject to propellant engine modes.

    Science.gov (United States)

    Mazinan, A H

    2015-09-01

    The paper attempts to address a new control approach to spacecraft maneuvers based upon the modes of propellant engine. A realization of control strategy is now presented in engine on mode (high thrusts as well as further low thrusts), which is related to small angle maneuvers and engine off mode (specified low thrusts), which is also related to large angle maneuvers. There is currently a coarse-fine tuning in engine on mode. It is shown that the process of handling the angular velocities are finalized via rate feedback system in engine modes, where the angular rotations are controlled through quaternion based control (QBCL)strategy in engine off mode and these ones are also controlled through an optimum PID (OPIDH) strategy in engine on mode. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

  1. Drilling in areas subject to environmental protection; A perfuracao em area de protecao ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Mendonca, Ricardo Teixeira; Guimaraes, Antimio Santos [PETROBRAS, XX (Brazil). Distrito de Perfuracao do Nordeste. Div. Tecnica; Santana, Manoel Messias de [PETROBRAS, XX (Brazil). Regiao de Producao do Nordeste. Setor de Seguranca Industrial

    1989-12-31

    This paper presents the practices developed for pollution control in areas subject to environmental protection. This well drilling operation was carried out in the Municipality of Marechal Deodoro, in the State of Alagoas, in locality named Massagueira. We stress the preventive methods for liquid and solid effluent generation and the use of Closed Fluid System or Anti-Dike System. (author) 3 figs.

  2. The Detroit Area Pre-College Engineering Program, Inc. (DAPCEP).

    Science.gov (United States)

    Hill, Kenneth

    1990-01-01

    Describes activities of the Detroit Area Pre-College Engineering Program (DAPCEP), which aims to increase the number of middle school and high school minority (Black, Hispanic, and Native American) students who are motivated and prepared academically to choose careers in science, engineering, and other technical fields. Summarizes program…

  3. Pluridisciplinarity vs. interdisciplinarity in civil engineering education in seismic areas

    Directory of Open Access Journals (Sweden)

    Emil-Sever GEORGESCU

    2012-12-01

    Full Text Available Civil engineers are involved in building and maintaining a built environment that meets the sustainable development requirements. This environment is interdisciplinary in its nature, as it results from an interaction between different actors (architects, city planners, authorities, clients, civil engineers. Professional formation and training of engineers is a result of the didactic and technical efforts, which later will be reflected in the way constructions are being designed and built, so that engineers are not considered simple workers. Thus, when discussing professional formation and training of engineers, one should debate the necessary steps they have to take in their relationship with other disciplines. Practicing civil engineering in seismic risk areas in Romania adds specific requirements.

  4. Problem Solving and Creativity and Design: What Influence Do They Have on Girls' Interest in STEM Subject Areas?

    Science.gov (United States)

    Cooper, Robyn; Heaverlo, Carol

    2013-01-01

    For girls there is a distinct loss in interest, lack of confidence, and decline in positive attitudes toward STEM subject areas that begins early on in their academic experience and increases with age. According to the National Academy of Engineering, students need to begin associating the possibilities in STEM fields with the need for creativity…

  5. Industrial Engineering Higher Education in the European Area (EHEA

    Directory of Open Access Journals (Sweden)

    Juan A. Marin-Garcia

    2011-04-01

    Full Text Available Purpose: We present the state of the art of industrial engineering higher education in the European area and we describe the submitted works to the special issue “Rethinking Industrial Engineering Higher Education in the European Area (EHEA”.Design/methodology/approach: In this paper we collect the information published on industrial engineering higher education and the information provided by papers presented in the special issue.Findings: The methodologies and approaches performed by the people teaching.Research limitations/implications: Professors of the European area could take profit of the information provided in this paper.Practical implications: Other lecturers could use the information provided in this paper to know more teaching methodologies or to enhance their educational methods.

  6. Engineering research, development and technology. Thrust area report, FY93

    Energy Technology Data Exchange (ETDEWEB)

    1994-05-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff, tools, and facilities needed to support current and future LLNL programs. The efforts are guided by a dual-benefit research and development strategy that supports Department of Energy missions, such as national security through nuclear deterrence and economic competitiveness through partnerships with U.S. industry. This annual report, organized by thrust area, describes the activities for the fiscal year 1993. The report provides timely summaries of objectives, methods, and results from nine thrust areas for this fiscal year: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Fabrication Technology; Materials Science and Engineering; Power Conversion Technologies; Nondestructive Evaluation; Remote Sensing, Imaging, and Signal Engineering; and Emerging Technologies. Separate abstracts were prepared for 47 papers in this report.

  7. Hanford Environmental Information System (HEIS). Volume 3, Subject Area reference manual

    Energy Technology Data Exchange (ETDEWEB)

    Schreck, R.I.

    1994-01-14

    The Hanford Environmental Information System (HEIS) Subject Area manuals are designed as reference guides, that is, each chapter provides the information needed to make best use of each subject area, its tables, and reporting capabilities. Each subject area is documented in a chapter in one of the subject area manuals. Because these are reference manuals, most of the information is also available in the online help system as well. See Section 5.4.2 of the HEIS User`s Guide (DOE-RL 1994a) for a detailed description of the online help.

  8. Comparing the Scale of Web Subject Directories Precision in Technical-Engineering Information Retrieval

    Directory of Open Access Journals (Sweden)

    Mehrdokht Wazirpour Keshmiri

    2012-07-01

    Full Text Available The main purpose of this research was to compare the scale of web subject directories precision in information retrieval of technical-engineering science. Information gathering was documentary and webometric. Keywords of technical-engineering science were chosen at twenty different subjects from IEEE (Institute of Electrical and Electronics Engineers and engineering magazines that situated in sciencedirect site. These keywords are used at five subject directories Yahoo, Google, Infomine, Intute, Dmoz, that were web directories high-utilization. Usually first results in searching tools are connected to searching keywords. Because, first ten results was evaluated in every search. These assessments to consist of scale of precision, scale of error, scale retrieval items in technical-engineering categories to retrieval items entirely. The used criteria for determining the scale of precision that was according to high-utilization standards in different documents, to consist of presence of the keywords in title, appearance of keywords at the part of web retrieved pages, keywords adjacency, URL of page, page description and subject categories. Information analysis was according to Kruskal-Wallis Test and L.S.D fisher. Results revealed that there was meaningful difference about precision of web subject directories in information retrieval of technical-engineering science, Therefore this theory was confirmed.web subject directories ranked from point of precision as follows. Google, Yahoo, Intute, Dmoz, and Infomine. The scale of observed error at the first results was another criterion that was used for comparing web subject directories. In this research, Yahoo had minimum scale of error and Infomine had most of error. This research also compared the scale of retrieval items in all of categories web subject directories entirely to retrieval items in technical-engineering categories, results revealed that there was meaningful difference between them. And

  9. More than Beliefs: Subject Areas and Teachers' Integration of Laptops in Secondary Teaching

    Science.gov (United States)

    Howard, Sarah K.; Chan, Amy; Caputi, Peter

    2015-01-01

    The purpose of this paper is to explore the relationship of subject areas to teachers' technology integration. Educational technology research has often identified "culture clashes" to explain differences in technology use between subject areas. These clashes are frequently attributed to core features, values and beliefs held in the…

  10. Extent of the availability of Africana resources in subject areas in ...

    African Journals Online (AJOL)

    The study investigated the extent of the availability of Africana resources in various subject areas in thirteen first and second generation federal university libraries in Nigeria with the view of suggesting ways to improve the development of the collection in the university libraries that are deficient in the subject areas of any of ...

  11. Iterative bandgap engineering at selected areas of quantum semiconductor wafers.

    Science.gov (United States)

    Stanowski, Radoslaw; Martin, Matthieu; Ares, Richard; Dubowski, Jan J

    2009-10-26

    We report on the application of a laser rapid thermal annealing technique for iterative bandgap engineering at selected areas of quantum semiconductor wafers. The approach takes advantage of the quantum well intermixing (QWI) effect for achieving targeted values of the bandgap in a series of small annealing steps. Each QWI step is monitored by collecting a photoluminescence map and, consequently, choosing the annealing strategy of the next step. An array of eight sites, 280 mum in diameter, each emitting at 1480 nm, has been fabricated with a spectral accuracy of better than 2 nm in a standard InGaAs/InGaAsP QW heterostructure that originally emitted at 1550 nm.

  12. Output Only Modal Testing of a Car Body Subject to Engine Excitation

    DEFF Research Database (Denmark)

    Brincker, Rune; Andersen, Palle; Møller, Nis

    2000-01-01

    In this paper an output only modal testing and identification of a car body subject to engine excitation is presented. The response data were analyzed using two different techniques: a non-parametric technique based on Frequency Domain Decomposition (FDD), and a parametric technique working...

  13. Output Only Modal Testing of a Car Body Subject to Engine Excitation

    DEFF Research Database (Denmark)

    Brincker, Rune; Andersen, P.; Møller, N.

    2000-01-01

    In this paper an output only modal testing and identification of a car body subject to engine excitation is presented. The response data were analysed using two different techniques: a non-parametric technique based on Frequency Domain Decomposition (FDD), and a parametric technique working...

  14. Subjectivity

    Directory of Open Access Journals (Sweden)

    Jesús Vega Encabo

    2015-11-01

    Full Text Available In this paper, I claim that subjectivity is a way of being that is constituted through a set of practices in which the self is subject to the dangers of fictionalizing and plotting her life and self-image. I examine some ways of becoming subject through narratives and through theatrical performance before others. Through these practices, a real and active subjectivity is revealed, capable of self-knowledge and self-transformation. 

  15. Reference to the Safety Engineering Undergraduate Courses to Improve the Subjects and Contents of the Certified Safety Engineer Qualification and Examination System of China

    OpenAIRE

    Haibin Qiu; Shanghong Shi; Tingdi Zhao; Yiwei Qiao; Jiangshi Zhang

    2013-01-01

    The aim of this paper is to recommend that the subjects and contents of certified safety engineers use safety engineering undergraduate curriculum system for reference. Human resources play an important role in accident prevention and loss control. Education on safety engineering develops quickly in China. Moreover, the State Administration of Work Safety and the National Human Resources and Social Security Ministry have implemented a certified safety engineer qualification and examination sy...

  16. Mastication, EMG activity and occlusal contact area in subjects with different facial types.

    Science.gov (United States)

    Gomes, Simone Guimarães Farias; Custodio, William; Jufer, Juliana Silva Moura; Del Bel, Cury Altair Antoninha; Garcia, Renata Cunha Matheus Rodrigues

    2010-10-01

    Dentofacial morphology may affect orofacial functions, therefore the aim of the current study was to evaluate the influence of craniofacial morphology on masticatory function, occlusal contact area (OCA), and masticatory muscles activity. Seventy-eight (78) subjects were divided into three groups according to vertical facial pattern: 1. mesofacial; 2. brachyfacial; and 3. dolichofacial. Artificial material and the sieving method were used to access masticatory efficiency (ME). OCA was determined by registration of posterior teeth. Electromyographic (EMG) activity of the masseter and anterior temporal (AT) muscles was accessed bilaterally at rest and at maximal vertical clenching (MVC). ME (%) was significantly higher in brachyfacial and lower in dolichofacial subjects. Brachyfacials presented the highest OCA (mm2) followed by meso and dolichofacial subjects. The EMG of the masseter and AT at rest and at MVC showed that dolichofacial subjects presented the lowest activity values, while brachyfacial subjects presented significantly higher measurements. Craniofacial morphology affected masticatory function, OCA, and EMG activity of the masticatory muscles.

  17. Increased BDNF promoter methylation in the Wernicke area of suicide subjects.

    Science.gov (United States)

    Keller, Simona; Sarchiapone, Marco; Zarrilli, Federica; Videtic, Alja; Ferraro, Angelo; Carli, Vladimir; Sacchetti, Silvana; Lembo, Francesca; Angiolillo, Antonella; Jovanovic, Nikolina; Pisanti, Francesco; Tomaiuolo, Rossella; Monticelli, Antonella; Balazic, Joze; Roy, Alec; Marusic, Andrej; Cocozza, Sergio; Fusco, Alfredo; Bruni, Carmelo B; Castaldo, Giuseppe; Chiariotti, Lorenzo

    2010-03-01

    Brain-derived neurotrophic factor (BDNF) plays a pivotal role in the pathophysiology of suicidal behavior and BDNF levels are decreased in the brain and plasma of suicide subjects. So far, the mechanisms leading to downregulation of BDNF expression are poorly understood. To test the hypothesis that alterations of DNA methylation could be involved in the dysregulation of BDNF gene expression in the brain of suicide subjects. Three independent quantitative methylation techniques were performed on postmortem samples of brain tissue. BDNF messenger RNA levels were determined by quantitative real-time polymerase chain reaction. Academic medical center. Forty-four suicide completers and 33 nonsuicide control subjects of white ethnicity. The DNA methylation degree at BDNF promoter IV and the genome-wide DNA methylation levels in the brain's Wernicke area. Postmortem brain samples from suicide subjects showed a statistically significant increase of DNA methylation at specific CpG sites in BDNF promoter/exon IV compared with nonsuicide control subjects (P Wernicke area of the postmortem brain of suicide subjects irrespective of genome-wide methylation levels, indicating that a gene-specific increase in DNA methylation could cause or contribute to the downregulation of BDNF expression in suicide subjects. The reported data reveal a novel link between epigenetic alteration in the brain and suicidal behavior.

  18. 100 Areas engineers technical activities report, December 1950

    Energy Technology Data Exchange (ETDEWEB)

    1951-01-02

    Plant Assistance Group summaries are given for the B, D, F, H, and DR piles. The Engineering Development Group reports on: ball 3-X program, special field instruments, pile flux density measurements, magnesium inlet dummies, assistance to pile physics group, water survey program, boiling studies, slug temperature measurements, and the job status report for engineering development.

  19. An investigation on impacts of scheduling configurations on Mississippi biology subject area testing

    Science.gov (United States)

    Marchette, Frances Lenora

    The purpose of this mixed modal study was to compare the results of Biology Subject Area mean scores of students on a 4 x 4 block schedule, A/B block schedule, and traditional year-long schedule for 1A to 5A size schools. This study also reviewed the data to determine if minority or gender issues might influence the test results. Interviews with administrators and teachers were conducted about the type of schedule configuration they use and the influence that the schedule has on student academic performance on the Biology Subject Area Test. Additionally, this research further explored whether schedule configurations allow sufficient time for students to construct knowledge. This study is important to schools, teachers, and administrators because it can assist them in considering the impacts that different types of class schedules have on student performance and if ethnic or gender issues are influencing testing results. This study used the causal-comparative method for the quantitative portion of the study and constant comparative method for the qualitative portion to explore the relationship of school schedules on student academic achievement on the Mississippi Biology Subject Area Test. The aggregate means of selected student scores indicate that the Mississippi Biology Subject Area Test as a measure of student performance reveals no significant difference on student achievement for the three school schedule configurations. The data were adjusted for initial differences of gender, minority, and school size on the three schedule configurations. The results suggest that schools may employ various schedule configurations and expect student performance on the Mississippi Biology Subject Area Test to be unaffected. However, many areas of concern were identified in the interviews that might impact on school learning environments. These concerns relate to effective classroom management, the active involvement of students in learning, the adequacy of teacher education

  20. Building Virtually Free Subject Area Expertise through Social Media: An Exploratory Study

    Science.gov (United States)

    Kooy, Brian K.

    2016-01-01

    Central to the ongoing success of the liaison model is the need for liaison librarians to stay informed and up-to-date about recent developments in the subject areas of their assigned academic departments and programs. This article describes an exploratory study conducted to determine whether information obtained from the social media accounts of…

  1. Subject Area Glossary. Arabic-English Vocabulary. Curriculum Bulletin Number 22.

    Science.gov (United States)

    Chicago Board of Education, IL. Dept. of Curriculum.

    A glossary of commonly used and subject-area English words and their Arabic equivalents with romanization was prepared for teachers and Arabic-speaking, limited-English-speaking children in the Chicago public schools. It consists of: (1) a key to Arabic pronunciation of velarized consonants, glottal consonants, and Arabic double-consonants; (2) a…

  2. Ascertaining Activities in a Subject Area Through Bibliometric Analysis; Application to "Library Literature"

    Science.gov (United States)

    Saracevic, Tefko; Perk, Lawrence J.

    1973-01-01

    A combination of quantitative and qualitative techniques were used to analize the journal articles indexed in one volume of Library Literature.'' This approach, merging bibliometrics and classification, yielded results in such areas as dispersion of articles among journals, frequency of article type and types of subjects covered. (16 references)…

  3. Perceptions of Classroom Assessment Tasks: An Interplay of Gender, Subject Area, and Grade Level

    Science.gov (United States)

    Alkharusi, Hussain Ali; Al-Hosni, Salim

    2015-01-01

    This study investigates students' perceptions of classroom assessment tasks as a function of gender, subject area, and grade level. Data from 2753 students on Dorman and Knightley's (2006) Perceptions of Assessment Tasks Inventory (PATI) were analyzed in a MANOVA design. Results showed that students tended to hold positive perceptions of their…

  4. Practical Strategy on the Subject of “Science and Ethics” for Overcoming Hybrid Engineering Ethics Education

    Science.gov (United States)

    Yasui, Yoshiaki

    The issue of economic globalization and JABEE (Japan Accreditation Board for Engineering Education) mean that education on engineering ethics has now become increasingly important for science-engineering students who will become the next generation of engineers. This is clearly indicated when engineers are made professionally responsible for various unfortunate accidents that happen during daily life in society. Learning hybrid engineering ethics is an essential part of the education of the humanities and sciences. This paper treats the contents for the subject of “Science and Ethics” drawing on several years of practice and the fruits of studying science and engineering ethics at the faculty of science-engineering in university. This paper can be considered to be a practical strategy to the formation of morality.

  5. A Subject-Specificity Analysis of Radio Channels in Wireless Body Area Networks

    Directory of Open Access Journals (Sweden)

    Yang Hao

    2011-07-01

    Full Text Available This paper presents an analysis of subject-specific radio channels in wireless body area networks (WBANs using a simulation tool based on the parallel finite-difference time-domain (FDTD technique. This technique is well suited to model radio propagations around complex, inhomogeneous objects such as the human body. The impacts of different subjects varying in size on on-body, inter-body, and off-body radio channels are studied. The analysis demonstrates that the characteristics of on-body radio channels are subject-specific and are associated with human gender, height, and body mass index. On the other hand, when waves propagate away from the body, such as in the inter-body and off-body cases, the impacts of different subjects on the channel characteristics are found to be negligible.

  6. Subjective Evaluations of Motion Area and Velocity Characteristics of Dual Manipulator in Young and Elderly People

    Science.gov (United States)

    Yoda, Mitsumasa; Yoda, Asako; Shiota, Yasuhito

    In this study, we conducted a subjective evaluation experiment of a dual manipulator, which exhibits different motion characteristics. There are three motion characteristics: two of which are age-related, and the third is a robot motion characteristic and is newly added to these two motions. The motions are evaluated from motion areas and motion velocities. Subjects are elderly and young people, and the impressions of the motions are compared in two of the different age groups by the Semantic Differential (SD) method. The obtained results indicate that there are age differences in the evaluation of three manipulator motion areas. The elderly people show a higher reliability and a higher familiarity in a robot motion area than in the other two motions. The elderly people seem to be more affected by the manipulator motion than the young people. Therefore, a careful consideration is required when planning the motion of a manipulator for elderly people.

  7. Dynamic Response Analysis of Storage Cask Lid Structure Subjected to Lateral Impact Load of Aircraft Engine Crash

    Energy Technology Data Exchange (ETDEWEB)

    Almomania, Belal; Kang, Hyun Gook [KAIST, Daejeon (Korea, Republic of); Lee, Sanghoon [Keimyung Univ., Daegu (Korea, Republic of)

    2015-10-15

    Several numerical methods and tests have been carried out to measure the capability of storage cask to withstand extreme impact loads. Testing methods are often constrained by cost, and difficulty in preparation for several impact conditions with different applied loads, and areas of impact. Instead, analytic method is an acceptable process that can easily apply different impact conditions for the evaluation of cask integrity. The aircraft engine impact is considered as one of the most critical impact accidents on the storage cask that significantly affects onto the lid closure system and may cause a considerable release of radioactive materials. This paper presents a method for evaluating the dynamic responses of one upper metal cask lid closure without impact limiters subjected to lateral impact of an aircraft engine with respect to variation of the impact velocity. An assessment method to predict damage response due to the lateral engine impact onto metal storage cask has been studied by using computer code LS-DYNA. The dynamic behavior of the lid movements was successfully calculated by utilizing a simplified finite element cask model, which showed a good agreement with the previous research. The simulation analyses results showed that no significant plastic deformation for bolts, lid, and the cask body. In this study, the lid opening and sliding displacements are considered as the major factors in initiating the leakage path. This analysis may be useful for evaluating the instantaneous leakage rates in a connection with the sliding and opening displacements between the lid and the flange to ensure that the radiological consequences caused by an aircraft engine crash accident during the storage phase are within the permissible level.

  8. Engineering

    National Research Council Canada - National Science Library

    Includes papers in the following fields: Aerospace Engineering, Agricultural Engineering, Chemical Engineering, Civil Engineering, Electrical Engineering, Environmental Engineering, Industrial Engineering, Materials Engineering, Mechanical...

  9. Chewing side, bite force symmetry, and occlusal contact area of subjects with different facial vertical patterns

    Directory of Open Access Journals (Sweden)

    Simone Guimarães Farias Gomes

    2011-10-01

    Full Text Available Craniofacial dimensions influence oral functions; however, it is not known whether they are associated with function asymmetry. The objective of this study was to evaluate chewing side preference and lateral asymmetry of occlusal contact area and bite force of individuals with different craniofacial patterns. Seventy-eight dentate subjects were divided into 3 groups according to the VERT index as follows: (1 mesofacial, (2 brachyfacial and (3 dolichofacial. Chewing side preference was evaluated using jaw tracking equipment, occlusal contact area was measured by silicon registration of posterior teeth, and bite force was measured unilaterally on molar regions using 2.25 mm-thick sensors. Statistical analysis was performed using ANOVA on Ranks, Student's t-test, and Mann-Whitney tests at a 5% significance level. Mesofacial, brachyfacial, and dolichofacial subjects presented more occlusal contact area on the left side. Only dolichofacial subjects showed lateral asymmetry for bite force, presenting higher force on the left side. No statistically significant differences were found for chewing side preference among all groups. Within the limitations of this study, it can be concluded that craniofacial dimensions play a role in asymmetry of bite force. ClinicalTrials.gov ID: NCT01286363.

  10. Condylar volume and condylar area in class I, class II and class III young adult subjects

    Directory of Open Access Journals (Sweden)

    Saccucci Matteo

    2012-12-01

    Full Text Available Abstract Aim Aim of this study was to compare the volume and the shape of mandibular condyles in a Caucasian young adult population, with different skeletal pattern. Material and methods 200 Caucasian patients (15–30 years old, 95 male and 105 females were classified in three groups on the base of ANB angle: skeletal class I (65 patients, skeletal class II (70 patients and skeletal class III (65 patients. Left and right TMJs of each subject were evaluated independently with CBCT (Iluma. TMJ evaluation included: condylar volume; condylar area; morphological index (MI. Condylar volumes were calculated by using the Mimics software. The condylar volume, the area and the morphological index (MI were compared among the three groups, by using non-parametric tests. Results The Kruskal-Wallis test and the Mann Whitney test revealed that: no significant difference was observed in the whole sample between the right and the left condylar volume; subjects in skeletal class III showed a significantly higher condylar volume, respect to class I and class II subjects (p 3 in males and 663.5 ± 81.3 mm3 in females; p 2 in males and 389.76 ± 61.15 mm2 in females; p  Conclusion Skeletal class appeared to be associated to the mandibular condylar volume and to the mandibular condylar area in the Caucasian orthodontic population.

  11. The Impact of Web Search Engines on Subject Searching in OPAC

    Directory of Open Access Journals (Sweden)

    Holly Yu

    2017-09-01

    Full Text Available This paper analyzes the results of transaction logs at California State University, Los Angeles (CSULA and studies the effects of implementing a Web-based OPAC along with interface changes. The authors find that user success in subject searching remains problematic. A major increase in the frequency of searches that would have been more successful in resources other than the library catalog is noted over the time period 2000-2002. The authors attribute this increase to the prevalence of Web search engines and suggest that metasearching, relevance-ranked results, and relevance feedback ( "more like this" are now expected in user searching and should be integrated into online catalogs as search options.

  12. Condylar volume and condylar area in class I, class II and class III young adult subjects.

    Science.gov (United States)

    Saccucci, Matteo; D'Attilio, Michele; Rodolfino, Daria; Festa, Felice; Polimeni, Antonella; Tecco, Simona

    2012-12-14

    Aim of this study was to compare the volume and the shape of mandibular condyles in a Caucasian young adult population, with different skeletal pattern. 200 Caucasian patients (15-30 years old, 95 male and 105 females) were classified in three groups on the base of ANB angle: skeletal class I (65 patients), skeletal class II (70 patients) and skeletal class III (65 patients). Left and right TMJs of each subject were evaluated independently with CBCT (Iluma). TMJ evaluation included: condylar volume; condylar area; morphological index (MI). Condylar volumes were calculated by using the Mimics software. The condylar volume, the area and the morphological index (MI) were compared among the three groups, by using non-parametric tests. The Kruskal-Wallis test and the Mann Whitney test revealed that: no significant difference was observed in the whole sample between the right and the left condylar volume; subjects in skeletal class III showed a significantly higher condylar volume, respect to class I and class II subjects (p condylar volume was observed in class II subjects, respect to class I and class III (p condylar volume (699.8 ± 63.07 mm3 in males and 663.5 ± 81.3 mm3 in females; p condylar surface (423.24 ± 63.03 mm2 in males and 389.76 ± 61.15 mm2 in females; p condylar volume and to the mandibular condylar area in the Caucasian orthodontic population.

  13. Safety Analysis of Dual Purpose Metal Cask Subjected to Impulsive Loads due to Aircraft Engine Crash

    Science.gov (United States)

    Shirai, Koji; Namba, Kosuke; Saegusa, Toshiari

    In Japan, the first Interim Storage Facility of spent nuclear fuel away from reactor site is being planned to start its commercial operation around 2010, in use of dual-purpose metal cask in the northern part of Main Japan Island. Business License Examination for safety design approval has started since March, 2007. To demonstrate the more scientific and rational performance of safety regulation activities on each phase for the first license procedure, CREPEI has executed demonstration tests with full scale casks, such as drop tests onto real targets without impact limiters(1) and seismic tests subjected to strong earthquake motions(2). Moreover, it is important to develop the knowledge for the inherent security of metal casks under extreme mechanical-impact conditions, especially for increasing interest since the terrorist attacks from 11th September 2001(3)-(6). This paper presents dynamic mechanical behavior of the metal cask lid closure system caused by direct aircraft engine crash and describes calculated results (especially, leak tightness based on relative dynamic displacements between metallic seals). Firstly, the local penetration damage of the interim storage facility building by a big passenger aircraft engine crash (diameter 2.7m, length 4.3m, weight 4.4ton, impact velocity 90m/s) has been examined. The reduced velocity is calculated by the local damage formula for concrete structure with its thickness of 70cm. The load vs. time function for this reduced velocity (60m/s) is estimated by the impact analysis using Finite Element code LS-DYNA with the full scale engine model onto a hypothetically rigid target. Secondly, as the most critical scenarios for the metal cask, two impact scenarios (horizontal impact hitting the cask and vertical impact onto the lid metallic seal system) are chosen. To consider the geometry of all bolts for two lids, the gasket reaction forces and the inner pressure of the cask cavity, the detailed three dimensional FEM models are

  14. [Characterization of the leadership subject areas in the respiratory field in Spain].

    Science.gov (United States)

    de Granda-Orive, J I; García-Río, F; Roig-Vázquez, F; Aleixandre-Benavent, R; Valderrama-Zurían, J C; Martínez-Albiach, J M; Callol-Sánchez, L

    2006-11-01

    The aim of this study was to characterize the leading topics in respiratory system in Spain through a bibliometric analysis. For identify and characterize the performance of the different research topics in respiratory system in Spain, we compile the production using a journal that turn out representative of a broad group of researcher. In this sense the journal Archivos de Bronconeumología is the most important publication in Spanish language of this field. A total of 2198 articles published in Archivos Bronconeumología from 1970 to 2000 were analyzed. In each three decades, we did not found differences except in the productivity index in oncology in the eighty decade and in respiratory failure and sleep disturbance (RFSD) and oncology areas in the ninetieth decade and in the Price index (consumption indicators) in the diagnostic and therapeutic techniques area in seventy decade. When we compare the productivity index of each subject areas between decades, we found a significant production increase in the ninetieth decade in asthma, RFSD, tuberculosis, non tuberculosis infection, circulation, oncology, pleural disease and interstitial areas versus the same in seventy decade, and also, we found significant differences between ninetieth and eighty decades in the asthma, RFSD, non tuberculosis infection, circulation and pleural disease areas. Tuberculosis area maintains an insularity index higher than the other areas. We also found a progressive increase in the insularity index of RFSD, non tuberculosis infection, oncology and interstitial disease areas. In general all the indicators maintains stable although the more productivity topics were respiratory failure and sleep disturbances, and oncology. The productivity has increased in asthma, respiratory failure and sleep disturbances, tuberculosis, non - tuberculosis respiratory infections, oncology, pulmonary circulation, pleura and interstitial disease.

  15. Engineering Research and Development and Technology thrust area report FY92

    Energy Technology Data Exchange (ETDEWEB)

    Langland, R.T.; Minichino, C. [eds.

    1993-03-01

    The mission of the Engineering Research, Development, and Technology Program at Lawrence Livermore National Laboratory (LLNL) is to develop the technical staff and the technology needed to support current and future LLNL programs. To accomplish this mission, the Engineering Research, Development, and Technology Program has two important goals: (1) to identify key technologies and (2) to conduct high-quality work to enhance our capabilities in these key technologies. To help focus our efforts, we identify technology thrust areas and select technical leaders for each area. The thrust areas are integrated engineering activities and, rather than being based on individual disciplines, they are staffed by personnel from Electronics Engineering, Mechanical Engineering, and other LLNL organizations, as appropriate. The thrust area leaders are expected to establish strong links to LLNL program leaders and to industry; to use outside and inside experts to review the quality and direction of the work; to use university contacts to supplement and complement their efforts; and to be certain that we are not duplicating the work of others. This annual report, organized by thrust area, describes activities conducted within the Program for the fiscal year 1992. Its intent is to provide timely summaries of objectives, theories, methods, and results. The nine thrust areas for this fiscal year are: Computational Electronics and Electromagnetics; Computational Mechanics; Diagnostics and Microelectronics; Emerging Technologies; Fabrication Technology; Materials Science and Engineering; Microwave and Pulsed Power; Nondestructive Evaluation; and Remote Sensing and Imaging, and Signal Engineering.

  16. AXIOLOGICAL FOUNDATIONS OF PHYSICS AND TECHNICAL SUBJECTS STUDY OF THE FUTURE ENGINEERS

    Directory of Open Access Journals (Sweden)

    Iryna Slipukhina

    2017-11-01

    Full Text Available Formulation of the problem. Formation and development of the value orientations of the individual is the groundwork of education of young people at all educational levels. Necessity for axiologization of the process of education of the future engineers is strengthened by the specifics of technical and technological activity in the situation of the widespread use of ICT. Integration of value-motivational factors with the physics and technical disciplines study is an actual aspect in the development of modern higher technical education. Methods. The research uses a conceptual and comparative analysis of psycho-pedagogical and methodological literature, innovative experience and generalization of the authors’ long-term experience in pedagogical activity, as well as observation, conversations with teachers and students of higher educational institutions. Results. By the concretization of the functions, the essence of axiology in the system of higher education has been found out. The importance of transferring the motives of educational activity from the final result to the process and the determining role of motives for self-education has been established. The interrelations between the degree of value-motivational development of the personality and his individual characteristics are investigated. There is shown the essence of the phenomenon of attitude to study, its types have been determined. The research concretizes the place and importance of the most important professionally significant moral and ethical principles. Conclusions. Axiologization of higher technical education is a powerful means of forming the social, personal, subject and professional competence of the future engineer. Creation of the corresponding personally oriented didactic means is based on interdisciplinary methodological approaches in higher education.

  17. E-MODULE DEVELOPMENT FOR THE SUBJECT OF MEASURING INSTRUMENTS AND MEASUREMENT IN ELECTRONICS ENGINEERING EDUCATION

    Directory of Open Access Journals (Sweden)

    Nuryake Fajaryati

    2016-09-01

    Full Text Available This study aims to develop an e-module as a medium of learning for the practice course of Measuring Instruments and Measurement in the Department of Electronics Engineering Education of Yogyakarta State University and to determine the feasibility of the e-module. This study employed a method of research and development. The development process was conducted through four phases by using the model of Lee and Owens which consisted of analysis phase, design phase, developing and implementation phase, as well as evaluation phase.The evaluation was conducted in several stages. Firstly, an alpha test for product validation was conducted by the experts on material and media. After that, a beta test was conducted by testing the product in small group users. The subjects of this study were the students of Electronics Engineering. The instruments used to collect the data were a validation sheet and questionnaires. The results of qualitative data were then modified into quantitative data with a range of 1 to 5, then they were converted with a rating scale to determine the feasibility of the medium. The results showed that based on the alpha test, the medium was in a very high quality. Meanwhile, in the beta test of the instructional aspect, in terms of material and evaluation and the multimedia aspect the e-module was respectively considered feasible and quite feasible. The four indicators namely text, image, animation and video were all generally considered feasible. In terms of usage aspect, the e-module was considered feasible where its two indicators, namely instructions and navigation, were generally regarded as very feasible by all respondents.

  18. 100 Areas technical activities report -- Engineering, May, 1950

    Energy Technology Data Exchange (ETDEWEB)

    1950-06-28

    This report discusses progress made by the Physical Chemistry Group and Pile Engineering Groups. Topics covered are as follows: x-ray studies--tube bore mining; physical expansion of capsule exposures; special capsule exposures; pile annealing; thermal conductivity and pile annealing; total stored energy; Sykes stored energy method; slug corrosion rate; effect of pressure drop on slug corrosion; exposure of P-10 fuel slugs; slug corrosion weight loss variables; vertical safety rod thimble corrosion; front tube corrosion; magnesium corrosion program; thimble corrosion program; horizontal thimble removal; metal exposure production tests; special pile measurements; carbon dioxide; H pile power level increase; vertical thimble temperature; graphite core samples; nine tube mock-up; and required header pressure.

  19. LED Provides Effective and Efficient Parking Area Lighting at the NAVFAC Engineering Service Center

    Energy Technology Data Exchange (ETDEWEB)

    None

    2010-08-12

    U.S. Department of Energy (DOE) Federal Energy Management Program (FEMP) emerging technology case study showcasing LED lighting to improve energy efficiency in parking areas at the NAVFAC Engineering Services Center.

  20. 100 Areas technical activities report -- Engineering, July, 1947

    Energy Technology Data Exchange (ETDEWEB)

    Woods, W.K.

    1947-08-29

    This monthly report covers activities for the production reactors. The 100 Area activities include: corrosion and blistering studies of slugs and flanges; study of the process tube leak at 105-D; graphite expansion studies which include galling of process tubes and stresses in biological shields; and irradiation studies.

  1. Blood biomonitoring of metals in subjects living near abandoned mining and active industrial areas.

    Science.gov (United States)

    Madeddu, Roberto; Tolu, Paola; Asara, Yolande; Farace, Cristiano; Forte, Giovanni; Bocca, Beatrice

    2013-07-01

    A human blood biomonitoring campaign to detect the environmental exposure to metals (Cd, Cu, Cr, Mn, Pb and Zn) in 265 subjects was performed in the South-Western part of Sardinia (an Italian island) that is a particular area with a great history of coal and metal mining (Pb/Zn mainly) activities and large industrial structures (as metallurgy). Subjects living near the industrial plant area had geometric means (GM) of blood Cd (0.79 μg/l), Cu (971 μg/l), Mn (12.2 μg/l), and Pb (55.7 μg/l) significantly higher than controls (Cd, 0.47 μg/l; Cu, 900 μg/l; Mn 9.98 μg/l; Pb, 26.5 μg/l) and than people living nearby the past mining sites. Subjects living next to one dismissed mine were statistically higher in blood Cu (GM, 1,022 μg/l) and Pb (GM, 41.4 μg/l) concentrations than controls. No differences were observed in people living in the different mining sites, and this might be related to the decennial disclosure of mines and the adoption of environmental remediation programmes. Some interindividual variables influenced blood biomonitoring data, as smoke and age for Cd, gender for Cu, age, sex and alcohol for Pb, and age for Zn. Moreover, blood metal levels of the whole population were similar to reference values representative of the Sardinian population and acceptably safe according to currently available health guidelines.

  2. Engineering geology of the Great Bear River area, Northwest Territories

    Energy Technology Data Exchange (ETDEWEB)

    Savigny, K.W. (Univ. of British Columbia, Vancouver, BC (Canada))

    1989-01-01

    This report represents the results of an engineering geology study of the Great Bear River valley in the Northwest Territories. For most of its length, the river has a steep gradient and is deeply incised in a narrow valley. These topographic characteristics combined with the enormous reservoir capacity of Great Bear Lake make the valley attractive for hydroelectric development. Topographic characteristics and geographic location also make it an obstacle to linear facilities following the Mackenzie Transportation Corridor, such as pipelines, railroads and roads. The valley is incised up to 50 m below the levels of Mackenzie and Great Bear plains. Quaternary sediments are exposed intermittently along the valley slopes. Rocks of Tertiary age are exposed more or less continuously along the lower reach of Great Bear River, and Mesozoic and Paleozoic rocks are exposed where the river crosses McConnell Range at St. Charles Rapids. A single Laurentide till is present and is assumed to represent the Late Wisconsin ice advance. The till generally rests on bedrock, but locally it overlies older alluvial and deltaic sediments. This advance was followed by a lacustrine phase over Mackenzie Plain. The lacustrine phase appears to have ended abruptly with progradation of a deltaic facies. Permafrost is widespread except beneath large lakes, streams and rivers. Postglacial entrenchment by Great Bear River appears to have begun on Mackenzie Plain about 10,000 years ago and approached its present level by approximately 2670 years ago. 38 refs., 18 figs., 3 tabs.

  3. Cross-Cultural Communication Training for Students in Multidisciplinary Research Area of Biomedical Engineering

    Directory of Open Access Journals (Sweden)

    Shigehiro Hashimoto

    2014-08-01

    Full Text Available Biomedical Engineering makes multidisciplinary research area, which includes biology, medicine, engineering and others. Communication training is important for students, who have a potential to develop Biomedical Engineering. Communication is not easy in a multidisciplinary research area, because each area has its own background of thinking. Because each nation has its own background of culture, on the other hand, international communication is not easy, either. A cross-cultural student program has been designed for communication training in the multidisciplinary research area. Students from a variety of backgrounds of research area and culture have joined in the program: mechanical engineering, material science, environmental engineering, science of nursing, dentist, pharmacy, electronics, and so on. The program works well for communication training in the multidisciplinary research area of biomedical engineering. Foreign language and digital data give students chance to study several things: how to make communication precisely, how to quote previous data. The experience in the program helps students not only understand new idea in the laboratory visit, but also make a presentation in the international research conference. The program relates to author's several experiences: the student internship abroad, the cross-cultural student camp, multi PhD theses, various affiliations, and the creation of the interdisciplinary department.

  4. 75 FR 26967 - Guidance for Industry: Use of Water by Food Manufacturers in Areas Subject to a Boil-Water...

    Science.gov (United States)

    2010-05-13

    ... Areas Subject to a Boil-Water Advisory; Availability AGENCY: Food and Drug Administration, HHS. ACTION... entitled ``Guidance for Industry: Use of Water by Food Manufacturers in Areas Subject to a Boil-Water Advisory.'' This guidance is intended to advise food manufacturers that once a boil-water advisory has been...

  5. Academic Majors and Subject-Area Certifications of Health Education Teachers in the United States, 2011-2012

    Science.gov (United States)

    Cardina, Catherine

    2014-01-01

    Purpose: The purpose of this study was to identify academic preparation and subject-area certifications of K-12 public school staff teaching at least one health education class during 2011-2012 academic year. In general, teachers who are well qualified to teach a subject area are more likely to positively affect student achievement. Methods: Data…

  6. Estimating Modal Parameters of Civil Engineering Structures subject to Ambient and Harmonic Excitation

    DEFF Research Database (Denmark)

    Andersen, Palle; Brincker, Rune; Ventura, Carlos

    In this paper addresses the problems of separating structural modes and harmonics arising from sinusoidal excitation. Though the problem is mostly know in mechanical engineering applications such as rotating machinery, some civil engineering applications experiences the same challenges. A robust...... and fast harmonic detection procedure is presented and illustrated on a civil engineering case....

  7. HISTORICAL AMERICAN ENGINEERING RECORD - IDAHO NATIONAL ENGINEERING AND ENVIRONMENTAL LABORATORY, TEST AREA NORTH, HAER NO. ID-33-E

    Energy Technology Data Exchange (ETDEWEB)

    Susan Stacy; Hollie K. Gilbert

    2005-02-01

    Test Area North (TAN) was a site of the Aircraft Nuclear Propulsion (ANP) Project of the U.S. Air Force and the Atomic Energy Commission. Its Cold War mission was to develop a turbojet bomber propelled by nuclear power. The project was part of an arms race. Test activities took place in five areas at TAN. The Assembly & Maintenance area was a shop and hot cell complex. Nuclear tests ran at the Initial Engine Test area. Low-power test reactors operated at a third cluster. The fourth area was for Administration. A Flight Engine Test facility (hangar) was built to house the anticipated nuclear-powered aircraft. Experiments between 1955-1961 proved that a nuclear reactor could power a jet engine, but President John F. Kennedy canceled the project in March 1961. ANP facilities were adapted for new reactor projects, the most important of which were Loss of Fluid Tests (LOFT), part of an international safety program for commercial power reactors. Other projects included NASA's Systems for Nuclear Auxiliary Power and storage of Three Mile Island meltdown debris. National missions for TAN in reactor research and safety research have expired; demolition of historic TAN buildings is underway.

  8. Increased cortical area and thickness in the distal radius in subjects with SHOX-gene mutation.

    Science.gov (United States)

    Frederiksen, A L; Hansen, S; Brixen, K; Frost, M

    2014-12-01

    Short-stature homeobox (SHOX) gene haploinsufficiency may cause skeletal dysplasia including Léri-Weill Dyschondrosteosis (LWD), a clinical entity characterised by the triad of low height, mesomelic disproportion and Madelung's deformity of the wrist. Bone microarchitecture and estimated strength in adult SHOX mutation carriers have not been examined. Twenty-two subjects with a SHOX mutation including 7 males and 15 females with a median age of 38.8 [21.1-52.2] years were recruited from five unrelated families. The control group consisted of 22 healthy subjects matched on age and sex. Bone mineral density (BMD) was measured by dual-energy X-ray absorptiometry. Bone geometry, volumetric density, microarchitecture and finite element estimated (FEA) bone strength were measured using high-resolution peripheral quantitative computed tomography (HR-pQCT). A full region of interest (ROI) image analysis and height-matched ROI analyses adjusting for differences in body height between the two groups were performed. Areal BMD and T-scores showed no significant differences between cases and controls. Total radius area was smaller in cases than controls (207 [176-263] vs. 273 [226-298] mm, pRadius cortical bone area (74 ± 20 vs. 58 ± 17 mm(2), p=0.01) and thickness (1.16 ± 0.30 vs. 0.84 ± 0.26 mm, pRadius trabecular bone area (119 [103-192] vs. 202 [168-247] mm(2), pradius and tibia cortical porosity or FEA failure load between groups. A segment of cortical bone defect was identified in the distal radius adjacent to ulna in five unrelated SHOX mutation carriers. Subjects with a SHOX mutation presented with a different bone geometry in radius and tibia while there were no differences in BMD or failure load compared to controls, suggesting that mutations in SHOX gene may have an impact on bone microarchitecture albeit not bone strength. Copyright © 2014 Elsevier Inc. All rights reserved.

  9. Refractive error study in young subjects: results from a rural area in Paraguay

    Science.gov (United States)

    Signes-Soler, Isabel; Hernández-Verdejo, José Luis; Estrella Lumeras, Miguel Angel; Tomás Verduras, Elena; Piñero, David P.

    2017-01-01

    AIM To evaluate the distribution of refractive error in young subjects in a rural area of Paraguay in the context of an international cooperation campaign for the prevention of blindness. METHODS A sample of 1466 young subjects (ranging from 3 to 22 years old), with a mean age of 11.21±3.63 years old, were examined to assess their distance visual acuity (VA) and refractive error. The first screening examination performed by trained volunteers, included visual acuity testing, autokeratometry and non-cycloplegic autorefraction. Inclusion criteria for a second complete cycloplegic eye examination by an optometrist were VA <20/25 (0.10 logMAR or 0.8 decimal) and/or corneal astigmatism ≥1.50 D. RESULTS An uncorrected distance VA of 0 logMAR (1.0 decimal) was found in 89.2% of children. VA <20/25 and/or corneal astigmatism ≥1.50 D was found in 3.9% of children (n=57), with a prevalence of hyperopia of 5.2% (0.2% of the total) in this specific group. Furthermore, myopia (spherical equivalent ≤-0.5 D) was found in 37.7% of the refracted children (0.5% of the total). The prevalence of refractive astigmatism (cylinder ≤-1.50 D) was 15.8% (0.6% of the total). Visual impairment (VI) (0.05≤VA≤0.3) was found in 12/114 (0.4%) of the refracted eyes. Main causes for VI were refractive error (58%), retinal problems (17%, 2/12), albinism (17%, 2/12) and unknown (8%, 1/12). CONCLUSION A low prevalence of refractive error has been found in this rural area of Paraguay, with higher prevalence of myopia than of hyperopia. PMID:28393041

  10. Refractive error study in young subjects: results from a rural area in Paraguay

    Directory of Open Access Journals (Sweden)

    Isabel Signes-Soler

    2017-03-01

    Full Text Available AIM: To evaluate the distribution of refractive error in young subjects in a rural area of Paraguay in the context of an international cooperation campaign for the prevention of blindness. METHODS: A sample of 1466 young subjects (ranging from 3 to 22 years old, with a mean age of 11.21±3.63 years old, were examined to assess their distance visual acuity (VA and refractive error. The first screening examination performed by trained volunteers, included visual acuity testing, autokeratometry and non-cycloplegic autorefraction. Inclusion criteria for a second complete cycloplegic eye examination by an optometrist were VA <20/25 (0.10 logMAR or 0.8 decimal and/or corneal astigmatism ≥1.50 D. RESULTS: An uncorrected distance VA of 0 logMAR (1.0 decimal was found in 89.2% of children. VA <20/25 and/or corneal astigmatism ≥1.50 D was found in 3.9% of children (n=57, with a prevalence of hyperopia of 5.2% (0.2% of the total in this specific group. Furthermore, myopia (spherical equivalent ≤-0.5 D was found in 37.7% of the refracted children (0.5% of the total. The prevalence of refractive astigmatism (cylinder ≤-1.50 D was 15.8% (0.6% of the total. Visual impairment (VI (0.05≤VA≤0.3 was found in 12/114 (0.4% of the refracted eyes. Main causes for VI were refractive error (58%, retinal problems (17%, 2/12, albinism (17%, 2/12 and unknown (8%, 1/12. CONCLUSION: A low prevalence of refractive error has been found in this rural area of Paraguay, with higher prevalence of myopia than of hyperopia.

  11. Spatial variability of soil potassium in sugarcane areas subjected to the application of vinasse.

    Science.gov (United States)

    De Carvalho, Laércio A; Meurer, Ismael; Da Silva Junior, Carlos A; Santos, Cristiane F B; Libardi, Paulo L

    2014-12-01

    When deposited on land the vinasse can promote improvement in fertility, however, often fertilizer application occurs in areas considered homogeneous, without taking into account the variability of the soil. The objective of this study was to evaluate the effect of vinasse application on potassium content in two classes of soils cultivated with sugarcane, and characterize the spatial variability of soil using geostatistical techniques. In the 2010 and 2011 crop year, soil samples were collected from an experimental grid at 0-0.2 and 0.2-0.4 m depth in three soils cultivated with sugarcane, totaling 90 samplings in each grid, for the determination of pH, calcium (Ca), magnesium (Mg), potassium (K), phosphorus (P), aluminum (Al) and potential acidity (H + Al). The data have been submitted to analysis of descriptive statistics and the K attribute was subjected to geostatistical analysis. The coefficient of variation indicated medium and high variability of K for the three soils. The results showed that the spatial dependence of K increased in depth to FRce and decreased to PHlv, indicating that the attribute could have followed the pattern of distribution of clay in depth. The investigation of the spatial variability of K on the surface and subsurface soils provided the definition of management zones with different levels of fertility, which can be organized into sub-areas for a more efficient management of the resources and the environment.

  12. Spatial variability of soil potassium in sugarcane areas subjected to the application of vinasse

    Directory of Open Access Journals (Sweden)

    LAÉRCIO A. DE CARVALHO

    2014-12-01

    Full Text Available When deposited on land the vinasse can promote improvement in fertility, however, often fertilizer application occurs in areas considered homogeneous, without taking into account the variability of the soil. The objective of this study was to evaluate the effect of vinasse application on potassium content in two classes of soils cultivated with sugarcane, and characterize the spatial variability of soil using geostatistical techniques. In the 2010 and 2011 crop year, soil samples were collected from an experimental grid at 0-0.2 and 0.2-0.4 m depth in three soils cultivated with sugarcane, totaling 90 samplings in each grid, for the determination of pH, calcium (Ca, magnesium (Mg, potassium (K, phosphorus (P, aluminum (Al and potential acidity (H + Al. The data have been submitted to analysis of descriptive statistics and the K attribute was subjected to geostatistical analysis. The coefficient of variation indicated medium and high variability of K for the three soils. The results showed that the spatial dependence of K increased in depth to FRce and decreased to PHlv, indicating that the attribute could have followed the pattern of distribution of clay in depth. The investigation of the spatial variability of K on the surface and subsurface soils provided the definition of management zones with different levels of fertility, which can be organized into sub-areas for a more efficient management of the resources and the environment.

  13. Is Chinese Software Engineering Professionalizing or Not?: Specialization of Knowledge, Subjective Identification and Professionalization

    Science.gov (United States)

    Yang, Yan

    2012-01-01

    Purpose: This paper aims to discuss the challenge for the classical idea of professionalism in understanding the Chinese software engineering industry after giving a close insight into the development of this industry as well as individual engineers with a psycho-societal perspective. Design/methodology/approach: The study starts with the general…

  14. 33 CFR 334.150 - Severn River at Annapolis, Md.; experimental test area, U.S. Navy Marine Engineering Laboratory.

    Science.gov (United States)

    2010-07-01

    ....; experimental test area, U.S. Navy Marine Engineering Laboratory. 334.150 Section 334.150 Navigation and... RESTRICTED AREA REGULATIONS § 334.150 Severn River at Annapolis, Md.; experimental test area, U.S. Navy Marine Engineering Laboratory. (a) The restricted area. The waters of Severn River shoreward of a line...

  15. DOMAIN-DRIVEN DESIGN APPLICATION AND IMPLEMENTATION OF INFORMATION SYSTEMS FOR CLIENTS QUEUING SUBJECT AREAS

    Directory of Open Access Journals (Sweden)

    P. P. Oleynik

    2015-11-01

    Full Text Available The paper deals with domain-driven design applicability of information systems for client queuing subject areas. The following optimality criteria were put forward for the final implementation: the possibility of automation with a single system both for small institution and a whole network of institutions; advanced graphical interface with support for sensor screens; implementation of multi-users account of orders from clients; flexible application architecture with the ability of future enhancement; ability of integration with a variety of peripherals. The necessity of each criterion definition is shown. For implementability estimation, test information system was designed, automating the queuing system. Unified modeling language UML is used. Description of each class functionality is given and the association with other classes as well. Attention is paid to the design of tree (hierarchical structures and selection procedure of base classes based on the analysis of existing common attributes. For the system implementation, its own development environment SharpArchitect RAD Studio is used, offering MDA approach for implementation of systems based on standardized meta object system. A graphical view of order form developed prototype is presented, composition and structure are described, and notation developed by the author is given simplifying the prototyping process. Approaches to differentiation of access rights for different user roles are shown. Conformity of the received implementation to each selected optimality criterion is determined. Recommendations for further system development are given.

  16. Mechanical engineer's handbook

    CERN Document Server

    Marghitu, Dan B

    2001-01-01

    The Mechanical Engineer's Handbook was developed and written specifically to fill a need for mechanical engineers and mechanical engineering students throughout the world. With over 1000 pages, 550 illustrations, and 26 tables the Mechanical Engineer's Handbook is very comprehensive, yet affordable, compact, and durable. The Handbook covers all major areas of mechanical engineering with succinct coverage of the definitions, formulas, examples, theory, proofs, and explanations of all principle subject areas. The Handbook is an essential, practical companion for all mechanic

  17. Electronic Grey Literature in Accelerator Science and Its Allied Subjects : Selected Web Resources for Scientists and Engineers

    CERN Document Server

    Rajendiran, P

    2006-01-01

    Grey literature Web resources in the field of accelerator science and its allied subjects are collected for the scientists and engineers of RRCAT (Raja Ramanna Centre for Advanced Technology). For definition purposes the different types of grey literature are described. The Web resources collected and compiled in this article (with an overview and link for each) specifically focus on technical reports, preprints or e-prints, which meet the main information needs of RRCAT users.

  18. Implementing the flipped classroom methodology to the subject "Applied computing" of the chemical engineering degree at the University of Barcelona

    Directory of Open Access Journals (Sweden)

    Montserrat Iborra

    2017-06-01

    Full Text Available This work is focus on implementation, development, documentation, analysis and assessment of flipped classroom methodology, by means of just in time teaching strategy, in a pilot group (1 of 6 of the subject “Applied Computing” of Chemical Engineering Undergraduate Degree of the University of Barcelona. The results show that this technique promotes self-learning, autonomy, time management as well as an increase in the effectiveness of classroom hours.

  19. Results from the beam test of the engineering model of the GLAST large area telescope

    Energy Technology Data Exchange (ETDEWEB)

    Couto e Silva, E. do E-mail: eduardo@slac.stanford.edu; Anthony, P.; Arnold, R.; Arrighi, H.; Bloom, E.; Baughman, B.; Bogart, J.; Bosted, P.; Bumala, B.; Chekhtman, A.; Cotton, N.; Crider, A.; Dobbs-Dixon, I.; Djannati-Atai, A.; Dubois, R.; Engovatov, D.; Espigat, P.; Evans, J.L.; Fieguth, T.; Flath, D.; Frigaard, M.; Giebels, B.; Gillespie, S.; Godfrey, G.; Grove, J.E.; Handa, T.; Hansl-Kozanecka, T.; Hernando, J.; Hicks, M.; Hirayama, M.; Johnson, W.N.; Johnson, R.; Kamae, T.; Kroeger, W.; Lauben, D.; Lin, Y.C.; Lindner, T.; Michelson, P.; Moiseev, A.; Nikolaou, M.; Nolan, P.; Odian, A.; Ohsugi, T.; Ormes, J.; Paliaga, G.; Parkinson, P. Saz; Phlips, B.; Ritz, S.; Rock, S.; Russel, J.J.; Sadrozinski, H.; Schalk, T.; Silvis, J.; Szalata, Z.; Terrier, R.; Thompson, D.J.; Tournear, D.M.; Waite, A.P.; Wallace, J.; Williams, S.; Williamson, R.; Winker, G

    2001-11-21

    This paper describes the results of a beam test using the Engineering Model of the GLAST Large Area Telescope, which was installed in a beam of positrons, hadrons and tagged photons at SLAC. The performance of the four subsystems, Anti Coincidence Detector, Silicon Tracker, Calorimeter and Data Acquisition will be described.

  20. Results from the Beam Test of the Engineering Model of the GLAST Large Area Telescope

    Energy Technology Data Exchange (ETDEWEB)

    do Couto e Silva, Eduardo

    2000-11-03

    This paper describes the results of a beam test using the Engineering Model of the GLAST Large Area Telescope, which was installed in a beam of positrons, hadrons and tagged photons at SLAC. The performance of the four subsystems, Anti Coincidence Detector, Silicon Tracker, Calorimeter and Data Acquisition will be described.

  1. Investigating diesel engines as an atmospheric source of isocyanic acid in urban areas

    Science.gov (United States)

    Jathar, Shantanu H.; Heppding, Christopher; Link, Michael F.; Farmer, Delphine K.; Akherati, Ali; Kleeman, Michael J.; de Gouw, Joost A.; Veres, Patrick R.; Roberts, James M.

    2017-07-01

    Isocyanic acid (HNCO), an acidic gas found in tobacco smoke, urban environments, and biomass-burning-affected regions, has been linked to adverse health outcomes. Gasoline- and diesel-powered engines and biomass burning are known to emit HNCO and hypothesized to emit precursors such as amides that can photochemically react to produce HNCO in the atmosphere. Increasingly, diesel engines in developed countries like the United States are required to use selective catalytic reduction (SCR) systems to reduce tailpipe emissions of oxides of nitrogen. SCR chemistry is known to produce HNCO as an intermediate product, and SCR systems have been implicated as an atmospheric source of HNCO. In this work, we measure HNCO emissions from an SCR system-equipped diesel engine and, in combination with earlier data, use a three-dimensional chemical transport model (CTM) to simulate the ambient concentrations and source/pathway contributions to HNCO in an urban environment. Engine tests were conducted at three different engine loads, using two different fuels and at multiple operating points. HNCO was measured using an acetate chemical ionization mass spectrometer. The diesel engine was found to emit primary HNCO (3-90 mg kg fuel-1) but we did not find any evidence that the SCR system or other aftertreatment devices (i.e., oxidation catalyst and particle filter) produced or enhanced HNCO emissions. The CTM predictions compared well with the only available observational datasets for HNCO in urban areas but underpredicted the contribution from secondary processes. The comparison implied that diesel-powered engines were the largest source of HNCO in urban areas. The CTM also predicted that daily-averaged concentrations of HNCO reached a maximum of ˜ 110 pptv but were an order of magnitude lower than the 1 ppbv level that could be associated with physiological effects in humans. Precursor contributions from other combustion sources (gasoline and biomass burning) and wintertime

  2. Intra-Rater Reliability of Rehabilitative Ultrasound Imaging for Multifidus Muscles Thickness and Cross Section Area in Healthy Subjects

    OpenAIRE

    Hosseinifar, Mohammad; Akbari, Asghar; Ghiasi, Fateme

    2015-01-01

    Introduction: Rehabilitative Ultrasound Imaging (RUSI) must be valuable method for research and rehabilitation. So, the reliability of its measurements must be determined. The purpose of this study was to evaluate the intra-rater reliability of RUSI for measurement of multifidus (MF) muscles cross section areas (CSAs), bladder wall diameter, and thickness of MF muscles between 2 sessions in healthy subjects. Method: Fifteen healthy subjects through simple non-probability sampling participated...

  3. Establishment of first engineering specifications for environmental modification to eliminate schistosomiasis epidemic foci in urban areas.

    Science.gov (United States)

    Kong, Shibo; Tan, Xiaodong; Deng, Zhiqing; Xie, Yaofei; Yang, Fen; Zheng, Zengwang

    2017-08-01

    Snail control is a key link in schistosomiasis control, but no unified methods for eliminating snails have been produced to date. This study was conducted to explore an engineering method for eliminating Oncomelania hupensis applicable to urban areas. The engineering specifications were established using the Delphi method. An engineering project based on these specifications was conducted in Hankou marshland to eliminate snails, including the transformation of the beach surface and ditches. Molluscicide was used as a supplement. The snail control effect was evaluated by field investigation. The engineering results fulfilled the requirements of the design. The snail density decreased to 0/0.11m 2 , and the snail area dropped to 0m 2 after the project. There was a statistically significant difference in the number of frames with snails before and after the project (Pengineering specifications for environmental modification were successfully established. Environmental modification, mainly through beach and ditch remediation, can completely change the environment of Oncomelania breeding. This method of environmental modification combined with mollusciciding was highly effective at eliminating snails. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Attitudes towards mathematics as a subject and mathematics learning and instruction in a trans-disciplinary engineering study

    DEFF Research Database (Denmark)

    Triantafyllou, Evangelia; Misfeldt, Morten; Timcenko, Olga

    2016-01-01

    This article explores student attitudes and preferences in learning and teaching of mathematics in engineering studies that transcend the division between technical, scientific and artistic disciplines. For observing such attitudes, we have developed a model that relates the attitude towards...... mathematics as a subject with the attitude towards mathematics learning and instruction. Data comes from a study at the Media technology educational program of Aalborg university. The study used attitude and preference questionnaires, and observations and interviews with students. The results show that media...... technology students are not confident in mathematics and consider mathematics to be a difficult subject. Nevertheless, they recognize the importance of mathematics both in their studies and in general. Moreover, students favour learning on their own or together with their peers over learning supported...

  5. Economics of Scholarly Publishing: Exploring the Causes of Subscription Price Variations of Scholarly Journals in Business Subject-Specific Areas

    Science.gov (United States)

    Liu, Lewis G.

    2011-01-01

    This empirical research investigates subscription price variations of scholarly journals in five business subject-specific areas using the semilogarithmic regression model. It has two main purposes. The first is to address the unsettled debate over whether or not and to what extent commercial publishers reap monopoly profits by overcharging…

  6. Performance Gaps between Online and Face-to-Face Courses: Differences across Types of Students and Academic Subject Areas

    Science.gov (United States)

    Xu, Di; Jaggars, Shanna S.

    2014-01-01

    Using a dataset containing nearly 500,000 courses taken by over 40,000 community and technical college students in Washington State, this study examines the performance gap between online and face-to-face courses and how the size of that gap differs across student subgroups and academic subject areas. While all types of students in the study…

  7. Identification of profitable areas to apply product configuration systems in Engineering-To-Order companies

    DEFF Research Database (Denmark)

    Kristjansdottir, Katrin; Hvam, Lars; Shafiee, Sara

    2015-01-01

    This article suggests a systematic framework for identifying potential areas, where Engineering-To-Order (ETO) companies may increase their profit-ability by implementing a Product Configuration System (PCS). In order to do so a three-step framework is proposed based on literature. The starting p......, it is suggested to make a cost-benefit analysis for different scenarios to determine where a PCS can provide the most benefits. This article is supplemented with a case study from an ETO company where potential areas for using PCS were found by applying the suggested framework....

  8. Investigation of the impact of low cost traffic engineering measures on road safety in urban areas.

    Science.gov (United States)

    Yannis, George; Kondyli, Alexandra; Georgopoulou, Xenia

    2014-01-01

    This paper investigates the impact of low cost traffic engineering measures (LCTEMs) on the improvement of road safety in urban areas. A number of such measures were considered, such as speed humps, woonerfs, raised intersections and other traffic calming measures, which have been implemented on one-way, one-lane roads in the Municipality of Neo Psychiko in the Greater Athens Area. Data were analysed using the before-and-after safety analysis methodology with large control group. The selected control group comprised of two Municipalities in the Athens Greater Area, which present similar road network and land use characteristics with the area considered. The application of the methodology showed that the total number of crashes presented a statistically significant reduction, which can be possibly attributed to the introduction of LCTEMs. This reduction concerns passenger cars and single-vehicle crashes and is possibly due to the behavioural improvement of drivers of 25 years old or more. The results of this research are very useful for the identification of the appropriate low cost traffic engineering countermeasures for road safety problems in urban areas.

  9. Considerations of education in the field of biophotonics in engineering: the experience of the subject fundamentals of biophotonics

    Science.gov (United States)

    Fanjul-Vélez, F.; Arce-Diego, J. L.

    2017-12-01

    Education in the field of photonics is usually somehow complex due to the fact that most of the programs include just a few subjects on the field, apart from specific Master programs in Photonics. There are also specific doctorate programs dealing with photonics. Apart from the problems shared with photonics in education in general, biophotonics specifically needs an interdisciplinary approach between biomedical and technical or scientific fields. In this work, we present our education experience in teaching the subject Fundamentals of Biophotonics, intended preferentially to engineering Bachelor and Master degrees students, but also to science and medicine students. First it was necessary to join a teaching group coming from the scientific technical and medical fields, working together in the subject. This task was easier as our research group, the Applied Optical Techniques group, had previous contacts and experience in working with medicine professors and medical doctors at hospitals. The orientation of the subject, intended for both technical and medical students, has to be carefully selected. All this information could be employed by other education institutions willing to implement studies on biomedical optics.

  10. Reproducibility and repeatability of foveal avascular zone area measurements using swept-source optical coherence tomography angiography in healthy subjects.

    Science.gov (United States)

    Mastropasqua, Rodolfo; Toto, Lisa; Mattei, Peter A; Di Nicola, Marta; Zecca, Isaia A L; Carpineto, Paolo; Di Antonio, Luca

    2017-05-11

    To assess the reproducibility and repeatability of foveal avascular zone (FAZ) area measurements using swept-source optical coherence tomography angiography (SS-OCTA) in healthy subjects. Sixty-four eyes of 64 healthy volunteers were randomly subjected to FAZ area measurements using SS-OCTA by 2 examiners in 2 different sessions. The FAZ areas measured by the first and second observer were 0.269 ± 0.092 mm2 and 0.270 ± 0.090 mm2, respectively. Within subjects, the coefficients of variations were 2.44% (95% confidence interval [CI] 1.95% to 2.93%) and 2.66% (95% CI 2.00% to 3.31%) for the first and second observers, respectively. The coefficient of repeatability average measurements of FAZ area were 0.021 mm2 and 0.024 mm2. The intraclass correlation coefficient values were 0.993 (95% CI 0.989 to 0.996) and 0.991 (95% CI 0.986 to 0.995). Interobserver and intraobserver concordance correlation coefficients ranged from 0.998 (95% CI 0.997 to 0.999) to 0.999 (95% CI 0.998 to 0.999) and from 0.989 (95% CI 0.982 to 0.993) to 0.987 (95% CI 0.979 to 0.992), respectively. The FAZ area measurements by means of SS-OCTA showed high reproducibility and repeatability in healthy eyes.

  11. Condylar volume and condylar area in class I, class II and class III young adult subjects

    OpenAIRE

    Saccucci Matteo; D’Attilio Michele; Rodolfino Daria; Festa Felice; Polimeni Antonella; Tecco Simona

    2012-01-01

    Abstract Aim Aim of this study was to compare the volume and the shape of mandibular condyles in a Caucasian young adult population, with different skeletal pattern. Material and methods 200 Caucasian patients (15–30 years old, 95 male and 105 females) were classified in three groups on the base of ANB angle: skeletal class I (65 patients), skeletal class II (70 patients) and skeletal class III (65 patients). Left and right TMJs of each subject were evaluated independently with CBCT (Iluma). ...

  12. MEG reveals a fast pathway from somatosensory cortex to occipital areas via posterior parietal cortex in a blind subject

    Directory of Open Access Journals (Sweden)

    Andreas A Ioannides

    2013-08-01

    Full Text Available Cross-modal activity in visual cortex of blind subjects has been reported during performance of variety of non-visual tasks. A key unanswered question is through which pathways non-visual inputs are funneled to the visual cortex. Here we used tomographic analysis of single trial magnetoencephalography (MEG data recorded from one congenitally blind and two sighted subjects after stimulation of the left and right median nerves at three intensities: below sensory threshold, above sensory threshold and above motor threshold; the last sufficient to produce thumb twitching. We identified reproducible brain responses in the primary somatosensory (S1 and motor (M1 cortices at around 20 ms post-stimulus, which were very similar in sighted and blind subjects. Time-frequency analysis revealed strong 45 to 70 Hz activity at latencies of 20 to 50 ms in S1 and M1, and posterior parietal cortex Brodmann areas (BA 7 and 40, which compared to lower frequencies, were substantially more pronounced in the blind than the sighted subjects. Critically, at frequencies from α-band up to 100 Hz we found clear, strong and widespread responses in the visual cortex of the blind subject, which increased with the intensity of the somatosensory stimuli. Time-delayed mutual information (MI revealed that in blind subject the stimulus information is funneled from the early somatosensory to visual cortex through posterior parietal BA 7 and 40, projecting first to visual areas V5 and V3, and eventually V1. The flow of information through this pathway occured in stages characterized by convergence of activations into specific cortical regions. In sighted subjects, no linked activity was found that led from the somatosensory to the visual cortex through any of the studied brain regions. These results provide the first evidence from MEG that in blind subjects, tactile information is routed from primary somatosensory to occipital cortex via the posterior parietal cortex.

  13. MEG reveals a fast pathway from somatosensory cortex to occipital areas via posterior parietal cortex in a blind subject.

    Science.gov (United States)

    Ioannides, Andreas A; Liu, Lichan; Poghosyan, Vahe; Saridis, George A; Gjedde, Albert; Ptito, Maurice; Kupers, Ron

    2013-01-01

    Cross-modal activity in visual cortex of blind subjects has been reported during performance of variety of non-visual tasks. A key unanswered question is through which pathways non-visual inputs are funneled to the visual cortex. Here we used tomographic analysis of single trial magnetoencephalography (MEG) data recorded from one congenitally blind and two sighted subjects after stimulation of the left and right median nerves at three intensities: below sensory threshold, above sensory threshold and above motor threshold; the last sufficient to produce thumb twitching. We identified reproducible brain responses in the primary somatosensory (S1) and motor (M1) cortices at around 20 ms post-stimulus, which were very similar in sighted and blind subjects. Time-frequency analysis revealed strong 45-70 Hz activity at latencies of 20-50 ms in S1 and M1, and posterior parietal cortex Brodmann areas (BA) 7 and 40, which compared to lower frequencies, were substantially more pronounced in the blind than the sighted subjects. Critically, at frequencies from α-band up to 100 Hz we found clear, strong, and widespread responses in the visual cortex of the blind subject, which increased with the intensity of the somatosensory stimuli. Time-delayed mutual information (MI) revealed that in blind subject the stimulus information is funneled from the early somatosensory to visual cortex through posterior parietal BA 7 and 40, projecting first to visual areas V5 and V3, and eventually V1. The flow of information through this pathway occurred in stages characterized by convergence of activations into specific cortical regions. In sighted subjects, no linked activity was found that led from the somatosensory to the visual cortex through any of the studied brain regions. These results provide the first evidence from MEG that in blind subjects, tactile information is routed from primary somatosensory to occipital cortex via the posterior parietal cortex.

  14. Cross-Modal Recruitment of Auditory and Orofacial Areas During Sign Language in a Deaf Subject.

    Science.gov (United States)

    Martino, Juan; Velasquez, Carlos; Vázquez-Bourgon, Javier; de Lucas, Enrique Marco; Gomez, Elsa

    2017-09-01

    Modern sign languages used by deaf people are fully expressive, natural human languages that are perceived visually and produced manually. The literature contains little data concerning human brain organization in conditions of deficient sensory information such as deafness. A deaf-mute patient underwent surgery of a left temporoinsular low-grade glioma. The patient underwent awake surgery with intraoperative electrical stimulation mapping, allowing direct study of the cortical and subcortical organization of sign language. We found a similar distribution of language sites to what has been reported in mapping studies of patients with oral language, including 1) speech perception areas inducing anomias and alexias close to the auditory cortex (at the posterior portion of the superior temporal gyrus and supramarginal gyrus); 2) speech production areas inducing speech arrest (anarthria) at the ventral premotor cortex, close to the lip motor area and away from the hand motor area; and 3) subcortical stimulation-induced semantic paraphasias at the inferior fronto-occipital fasciculus at the temporal isthmus. The intraoperative setup for sign language mapping with intraoperative electrical stimulation in deaf-mute patients is similar to the setup described in patients with oral language. To elucidate the type of language errors, a sign language interpreter in close interaction with the neuropsychologist is necessary. Sign language is perceived visually and produced manually; however, this case revealed a cross-modal recruitment of auditory and orofacial motor areas. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. Estimating species – area relationships by modeling abundance and frequency subject to incomplete sampling

    Science.gov (United States)

    Yamaura, Yuichi; Connor, Edward F.; Royle, Andy; Itoh, Katsuo; Sato, Kiyoshi; Taki, Hisatomo; Mishima, Yoshio

    2016-01-01

    Models and data used to describe species–area relationships confound sampling with ecological process as they fail to acknowledge that estimates of species richness arise due to sampling. This compromises our ability to make ecological inferences from and about species–area relationships. We develop and illustrate hierarchical community models of abundance and frequency to estimate species richness. The models we propose separate sampling from ecological processes by explicitly accounting for the fact that sampled patches are seldom completely covered by sampling plots and that individuals present in the sampling plots are imperfectly detected. We propose a multispecies abundance model in which community assembly is treated as the summation of an ensemble of species-level Poisson processes and estimate patch-level species richness as a derived parameter. We use sampling process models appropriate for specific survey methods. We propose a multispecies frequency model that treats the number of plots in which a species occurs as a binomial process. We illustrate these models using data collected in surveys of early-successional bird species and plants in young forest plantation patches. Results indicate that only mature forest plant species deviated from the constant density hypothesis, but the null model suggested that the deviations were too small to alter the form of species–area relationships. Nevertheless, results from simulations clearly show that the aggregate pattern of individual species density–area relationships and occurrence probability–area relationships can alter the form of species–area relationships. The plant community model estimated that only half of the species present in the regional species pool were encountered during the survey. The modeling framework we propose explicitly accounts for sampling processes so that ecological processes can be examined free of sampling artefacts. Our modeling approach is extensible and could be applied

  16. Investigating diesel engines as an atmospheric source of isocyanic acid in urban areas

    Directory of Open Access Journals (Sweden)

    S. H. Jathar

    2017-07-01

    Full Text Available Isocyanic acid (HNCO, an acidic gas found in tobacco smoke, urban environments, and biomass-burning-affected regions, has been linked to adverse health outcomes. Gasoline- and diesel-powered engines and biomass burning are known to emit HNCO and hypothesized to emit precursors such as amides that can photochemically react to produce HNCO in the atmosphere. Increasingly, diesel engines in developed countries like the United States are required to use selective catalytic reduction (SCR systems to reduce tailpipe emissions of oxides of nitrogen. SCR chemistry is known to produce HNCO as an intermediate product, and SCR systems have been implicated as an atmospheric source of HNCO. In this work, we measure HNCO emissions from an SCR system-equipped diesel engine and, in combination with earlier data, use a three-dimensional chemical transport model (CTM to simulate the ambient concentrations and source/pathway contributions to HNCO in an urban environment. Engine tests were conducted at three different engine loads, using two different fuels and at multiple operating points. HNCO was measured using an acetate chemical ionization mass spectrometer. The diesel engine was found to emit primary HNCO (3–90 mg kg fuel−1 but we did not find any evidence that the SCR system or other aftertreatment devices (i.e., oxidation catalyst and particle filter produced or enhanced HNCO emissions. The CTM predictions compared well with the only available observational datasets for HNCO in urban areas but underpredicted the contribution from secondary processes. The comparison implied that diesel-powered engines were the largest source of HNCO in urban areas. The CTM also predicted that daily-averaged concentrations of HNCO reached a maximum of ∼ 110 pptv but were an order of magnitude lower than the 1 ppbv level that could be associated with physiological effects in humans. Precursor contributions from other combustion sources (gasoline and biomass

  17. Magneto encephalography (MEG: perspectives of speech areas functional mapping in human subjects

    Directory of Open Access Journals (Sweden)

    Butorina A. V.

    2012-06-01

    Full Text Available One of the main problems in clinical practice and academic research is how to localize speech zones in the human brain. Two speech areas (Broca and Wernicke areas that are responsible for language production and for understanding of written and spoken language have been known since the past century. Their location and even hemispheric lateralization have a substantial inter-individual variability, especially in neurosurgery patients. Wada test is one of the most frequently used invasive methodology for speech hemispheric lateralization in neurosurgery patients. However, besides relatively high-risk of Wada test for patient's health, it has its own limitation, e. g. low reliability of Wada-based evidence of verbal memory brain lateralization. Therefore, there is an urgent need for non-invasive, reliable methods of speech zones mapping.The current review summarizes the recent experimental evidence from magnitoencephalographic (MEG research suggesting that speech areas are included in the speech processing within the first 200 ms after the word onset. The electro-magnetic response to deviant word, mismatch negativity wave with latency of 100—200 ms, can be recorded from auditory cortex within the oddball-paradigm. We provide the arguments that basic features of this brain response, such as its automatic, pre-attentive nature, high signal to noise ratio, source localization at superior temporal sulcus, make it a promising vehicle for non-invasive MEG-based speech areas mapping in neurosurgery.

  18. Subject-specific computational modeling of DBS in the PPTg area

    Science.gov (United States)

    Zitella, Laura M.; Teplitzky, Benjamin A.; Yager, Paul; Hudson, Heather M.; Brintz, Katelynn; Duchin, Yuval; Harel, Noam; Vitek, Jerrold L.; Baker, Kenneth B.; Johnson, Matthew D.

    2015-01-01

    Deep brain stimulation (DBS) in the pedunculopontine tegmental nucleus (PPTg) has been proposed to alleviate medically intractable gait difficulties associated with Parkinson's disease. Clinical trials have shown somewhat variable outcomes, stemming in part from surgical targeting variability, modulating fiber pathways implicated in side effects, and a general lack of mechanistic understanding of DBS in this brain region. Subject-specific computational models of DBS are a promising tool to investigate the underlying therapy and side effects. In this study, a parkinsonian rhesus macaque was implanted unilaterally with an 8-contact DBS lead in the PPTg region. Fiber tracts adjacent to PPTg, including the oculomotor nerve, central tegmental tract, and superior cerebellar peduncle, were reconstructed from a combination of pre-implant 7T MRI, post-implant CT, and post-mortem histology. These structures were populated with axon models and coupled with a finite element model simulating the voltage distribution in the surrounding neural tissue during stimulation. This study introduces two empirical approaches to evaluate model parameters. First, incremental monopolar cathodic stimulation (20 Hz, 90 μs pulse width) was evaluated for each electrode, during which a right eyelid flutter was observed at the proximal four contacts (−1.0 to −1.4 mA). These current amplitudes followed closely with model predicted activation of the oculomotor nerve when assuming an anisotropic conduction medium. Second, PET imaging was collected OFF-DBS and twice during DBS (two different contacts), which supported the model predicted activation of the central tegmental tract and superior cerebellar peduncle. Together, subject-specific models provide a framework to more precisely predict pathways modulated by DBS. PMID:26236229

  19. Subject-specific computational modeling of DBS in the PPTg area

    Directory of Open Access Journals (Sweden)

    Laura M. Zitella

    2015-07-01

    Full Text Available Deep brain stimulation (DBS in the pedunculopontine tegmental nucleus (PPTg has been proposed to alleviate medically intractable gait difficulties associated with Parkinson’s disease. Clinical trials have shown somewhat variable outcomes, stemming in part from surgical targeting variability, modulating fiber pathways implicated in side effects, and a general lack of mechanistic understanding of DBS in this brain region. Subject-specific computational models of DBS are a promising tool to investigate the underlying therapy and side effects. In this study, a parkinsonian rhesus macaque was implanted unilaterally with an 8-contact DBS lead in the PPTg region. Fiber tracts adjacent to PPTg, including the oculomotor nerve, central tegmental tract, and superior cerebellar peduncle, were reconstructed from a combination of pre-implant 7T MRI, post-implant CT, and post-mortem histology. These structures were populated with axon models and coupled with a finite element model simulating the voltage distribution in the surrounding neural tissue during stimulation. This study introduces two empirical approaches to evaluate model parameters. First, incremental monopolar cathodic stimulation (20Hz, 90µs pulse width was evaluated for each electrode, during which a right eyelid flutter was observed at the proximal four contacts (-1.0 to -1.4mA. These current amplitudes followed closely with model predicted activation of the oculomotor nerve when assuming an anisotropic conduction medium. Second, PET imaging was collected OFF-DBS and twice during DBS (two different contacts, which supported the model predicted activation of the central tegmental tract and superior cerebellar peduncle. Together, subject-specific models provide a framework to more precisely predict pathways modulated by DBS.

  20. Modelling of E. coli distribution in coastal areas subjected to combined sewer overflows.

    Science.gov (United States)

    De Marchis, Mauro; Freni, Gabriele; Napoli, Enrico

    2013-01-01

    Rivers, lakes and the sea were the natural receivers of raw urban waste and storm waters for a long time but the low sustainability of such practice, the increase of population and a renewed environmental sensibility increased researcher interest in the analysis and mitigation of the impact of urban waters on receiving water bodies (RWB). In Europe, the integrated modelling of drainage systems and RWB has been promoted as a promising approach for implementing the Water Framework Directive. A particular interest is given to the fate of pathogens and especially of Escherichia coli, in all the cases in which an interaction between population and the RWB is foreseen. The present paper aims to propose an integrated water quality model involving the analysis of several sewer systems (SS) discharging their polluting overflows on the coast in a sensitive marine environment. From a modelling point of view, the proposed application integrated one-dimensional drainage system models with a complex three-dimensional model analysing the propagation in space and time of E. coli in the coastal marine area. The integrated approach was tested in a real case study (the Acicastello bay in Italy) where data were available both for SS model and for RWB propagation model calibration. The analysis shows a good agreement between the model and monitored data. The integrated model was demonstrated to be a valuable tool for investigating the pollutant propagation and to highlight the most impacted areas.

  1. Quaternary volcanism, tectonics, and sedimentation in the Idaho National Engineering Laboratory area

    Energy Technology Data Exchange (ETDEWEB)

    Hackett, W.R.; Smith, R.P.

    1992-01-01

    In this article, we discuss the regional context and describe localities for a two-day field excursion in the vicinity of the Idaho National Engineering Laboratory (INEL). We address several geologic themes: (1) Late Cenozoic, bimodal volcanism of the Eastern Snake River Plain (ESRP), (2) the regional tectonics and structural geology of the Basin and Range province to the northwest of the ESRP, (3) fluvial, lacustrine, and aeolian sedimentation in the INEL area, and (4) the influence of Quaternary volcanism and tectonics on sedimentation near the INEL.

  2. Quaternary volcanism, tectonics, and sedimentation in the Idaho National Engineering Laboratory area

    Energy Technology Data Exchange (ETDEWEB)

    Hackett, W.R.; Smith, R.P.

    1992-09-01

    In this article, we discuss the regional context and describe localities for a two-day field excursion in the vicinity of the Idaho National Engineering Laboratory (INEL). We address several geologic themes: (1) Late Cenozoic, bimodal volcanism of the Eastern Snake River Plain (ESRP), (2) the regional tectonics and structural geology of the Basin and Range province to the northwest of the ESRP, (3) fluvial, lacustrine, and aeolian sedimentation in the INEL area, and (4) the influence of Quaternary volcanism and tectonics on sedimentation near the INEL.

  3. CO2 sequestration in two mediterranean dune areas subjected to a different level of anthropogenic disturbance

    Science.gov (United States)

    Bonito, Andrea; Ricotta, Carlo; Iberite, Mauro; Gratani, Loretta; Varone, Laura

    2017-09-01

    Coastal sand dunes are among the most threatened habitats, especially in the Mediterranean Basin, where the high levels of human pressure impair the presence of plant species, putting at risk the maintenance of the ecosystem services, such as CO2 sequestration provided by these habitats. The aim of this study was to analyze how disturbance-induced changes in plant species abundance patterns account for variations in annual CO2 sequestration flow (CS) of Mediterranean sand dune areas. Two sites characterized by a high (site HAD) and a lower (site LAD) anthropogenic disturbance level were selected. At both sites, plant species number, cover, height and CS based on net photosynthesis measurements were sampled. At the plant species level, our results highlighted that Ammophila arenaria and Pancratium maritimum, had a key role in CS. Moreover, the results revealed a patchy species assemblage in both sites. In particular, HAD was characterized by a higher extension of the anthropogenic aphytoic zone (64% of the total transect length) than LAD. In spite of the observed differences in plant species composition, there were not significant differences between HAD and LAD in structural and functional traits, such as plant height and net photosynthesis. As a consequence, HAD and LAD had a similar CS (443 and 421 Mg CO2 ha-1 y-1, respectively). From a monetary point of view, our estimates based on the social costs of carbon revealed that the flow of sequestered CO2 valued on an average 3181 ± 114 ha-1 year-1 (mean value for the two sites). However, considering also the value of the CO2 negative flow related to loss of vegetated area, the annual net benefit arising from CO2 sequestration amounted to 1641 and 1772 for HAD and LAD, respectively. Overall, the results highlighted the importance to maximize the efforts to preserve dune habitats by applying an effective management policy, which could allow maintaining also a regulatory ecosystem service such as CO2 sequestration.

  4. Population aging in local areas and subjective well-being of older adults: Findings from two studies in Japan.

    Science.gov (United States)

    Saito, Tami; Sugisawa, Hidehiro; Harada, Ken; Kai, Ichiro

    2016-05-23

    Subjective well-being (SWB) of older adults could be affected by both individual and community characteristics. However, the effect of community characteristics, such as population aging in local areas, remains unclear. This study examined the cross-sectional and longitudinal associations between the area-level population aging and SWB of older individuals from two distinct surveys. Those analyzed were 572 respondents aged 75 years and older for a cross-sectional survey in a metropolitan area in Tokyo, Japan (Study 1) and 1,257 and 859 respondents for a cross-sectional and longitudinal analysis, respectively, for a 2-year longitudinal survey project in urban and rural areas of Fukui Prefecture (Study 2). Area-level population aging was assessed by the number of people aged 65 years or older per 100 residents. SWB was assessed with the Life Satisfaction Index-A (LSIA). Multilevel analysis was performed to examine unconditional and conditional associations between the area-level number of older adults per 100 residents and the individual-level LSIA scores. The area-level number of older adults per 100 residents was significantly and positively associated with the LSIA scores in Study 1 (p = 0.042), even after controlling for the area- and individual-level covariates. In Study 2, we also found a significant effect of the area-level number of older adults per 100 residents on LSIA scores in the longitudinal multivariate analysis (p = 0.049). Findings from two survey projects suggested cross-validity in the positive effect of area-level population aging on older adults' SWB. Policymakers should consider older citizens' SWB in the recent urban-to-rural migration governmental policy as well as in urban renovation planning.

  5. The Difference in Translaminar Pressure Gradient and Neuroretinal Rim Area in Glaucoma and Healthy Subjects

    Directory of Open Access Journals (Sweden)

    Lina Siaudvytyte

    2014-01-01

    Full Text Available Purpose. To assess differences in translaminar pressure gradient (TPG and neuroretinal rim area (NRA in patients with normal tension glaucoma (NTG, high tension glaucoma (HTG, and healthy controls. Methods. 27 patients with NTG, HTG, and healthy controls were included in the prospective pilot study (each group consisted of 9 patients. Intraocular pressure (IOP, intracranial pressure (ICP, and confocal laser scanning tomography were assessed. TPG was calculated as the difference of IOP minus ICP. ICP was measured using noninvasive two-depth transcranial Doppler device. The level of significance P 0.05. The difference between TPG for healthy (5.4(7.7 mmHg and glaucomatous eyes (NTG 6.3(3.1 mmHg, HTG 15.7(7.7 mmHg was statistically significant (P < 0.001. Higher TPG was correlated with decreased NRA (r = −0.83; P = 0.01 in the NTG group. Conclusion. Translaminar pressure gradient was higher in glaucoma patients. Reduction of NRA was related to higher TPG in NTG patients. Further prospective studies are warranted to investigate the involvement of TPG in glaucoma management.

  6. Fundamental of biomedical engineering

    CERN Document Server

    Sawhney, GS

    2007-01-01

    About the Book: A well set out textbook explains the fundamentals of biomedical engineering in the areas of biomechanics, biofluid flow, biomaterials, bioinstrumentation and use of computing in biomedical engineering. All these subjects form a basic part of an engineer''s education. The text is admirably suited to meet the needs of the students of mechanical engineering, opting for the elective of Biomedical Engineering. Coverage of bioinstrumentation, biomaterials and computing for biomedical engineers can meet the needs of the students of Electronic & Communication, Electronic & Instrumenta

  7. Integrating UAV Flight outputs in Esri's CityEngine for semi-urban areas

    Science.gov (United States)

    Anca, Paula; Vasile, Alexandru; Sandric, Ionut

    2016-04-01

    One of the most pervasive technologies of recent years, which has crossed over into consumer products due to its lowering prince, is the UAV, commonly known as drones. Besides its ever-more accessible prices and growing functionality, what is truly impressive is the drastic reduction in processing time, from days to ours: from the initial flight preparation to the final output. This paper presents such a workflow and goes further by integrating the outputs into another growing technology: 3D. The software used for this purpose is Esri's CityEngine, which was developed for modeling 3D urban environments using existing 2D GIS data and computer generated architecture (CGA) rules, instead of modeling each feature individually. A semi-urban areas was selected for this study and captured using the E-Bee from Parrot. The output point cloud elevation from the E-Bee flight was transformed into a raster in order to be used as an elevation surface in CityEngine, and the mosaic raster dataset was draped over this surface. In order to model the buildings in this area CGA rules were written using the building footprints, as inputs, in the form of Feature Classes. The extrusion heights for the buildings were also extracted from the point cloud, and realistic textures were draped over the 3D building models. Finally the scene was shared as a 3D web-scene which can be accessed by anyone through a link, without any software besides an internet browser. This can serve as input for Smart City development through further analysis for urban ecology Keywords: 3D, drone, CityEngine, E-Bee, Esri, scene, web-scene

  8. 324 Building radiochemical engineering cells, high-level vault, low-level vault, and associated areas closure plan

    Energy Technology Data Exchange (ETDEWEB)

    Barnett, J.M.

    1998-03-25

    The Hanford Site, located adjacent to and north of Richland, Washington, is operated by the US Department of Energy, Richland Operations Office (RL). The 324 Building is located in the 300 Area of the Hanford Site. The 324 Building was constructed in the 1960s to support materials and chemical process research and development activities ranging from laboratory/bench-scale studies to full engineering-scale pilot plant demonstrations. In the mid-1990s, it was determined that dangerous waste and waste residues were being stored for greater than 90 days in the 324 Building Radiochemical Engineering Cells (REC) and in the High-Level Vault/Low-Level Vault (HLV/LLV) tanks. [These areas are not Resource Conservation and Recovery Act of 1976 (RCRA) permitted portions of the 324 Building.] Through the Hanford Federal Facility Agreement and Consent Order (Tri-Party Agreement) Milestone M-89, agreement was reached to close the nonpermitted RCRA unit in the 324 Building. This closure plan, managed under TPA Milestone M-20-55, addresses the identified building areas targeted by the Tri-Party Agreement and provides commitments to achieve the highest degree of compliance practicable, given the special technical difficulties of managing mixed waste that contains high-activity radioactive materials, and the physical limitations of working remotely in the areas within the subject closure unit. This closure plan is divided into nine chapters. Chapter 1.0 provides the introduction, historical perspective, 324 Building history and current mission, and the regulatory basis and strategy for managing the closure unit. Chapters 2.0, 3.0, 4.0, and 5.0 discuss the detailed facility description, process information, waste characteristics, and groundwater monitoring respectively. Chapter 6.0 deals with the closure strategy and performance standard, including the closure activities for the B-Cell, D-Cell, HLV, LLV; piping and miscellaneous associated building areas. Chapter 7.0 addresses the

  9. Sonographic measurements of low-echoic synovial area in the dorsal aspect of metatarsophalangeal joints in healthy subjects.

    Science.gov (United States)

    Hiraga, Masao; Ikeda, Kei; Shigeta, Koichiro; Sato, Akito; Yoshitama, Tamami; Hara, Ryota; Tanaka, Yasuhito

    2015-05-01

    Assessment of synovitis in the metatarsophalangeal (MTP) joints with ultrasound has been shown to improve the accuracy of assessment of rheumatoid arthritis (RA). However, the presence of intraarticular low-echoic synovial area (LESA) in the MTP joints in healthy subjects complicates the sonographic assessment of these joints. Healthy subjects with no arthritic symptoms in their MTP joints were recruited. All subjects completed a questionnaire and underwent physical examination and sonographic assessment. LESAs in the dorsal aspect of all MTP joints were measured in the longitudinal view. One thousand non-arthritic MTP joints in 100 healthy subjects (female 73, mean age 41.0 years old) were evaluated. Measurable LESAs were identified in all joints assessed. Mean length of LESA in each of the 1st-5th MTP joints was 17.8, 13.9, 11.9, 10.6, and 9.2 mm, respectively, whereas mean thickness was 2.4, 2.4, 1.8, 1.2, and 0.8 mm, respectively. Multivariate linear regression models identified the difference between 1st and 5th MTP joints as the most independently influential factor on the measurement of LESA. Our data provide the normal reference values for the measurements of LESA in Japanese, which should be taken into consideration when the synovitis in MTP joints is evaluated with ultrasound.

  10. Overview of heat transfer and fluid flow problem areas encountered in Stirling engine modeling

    Science.gov (United States)

    Tew, Roy C., Jr.

    1988-01-01

    NASA Lewis Research Center has been managing Stirling engine development programs for over a decade. In addition to contractual programs, this work has included in-house engine testing and development of engine computer models. Attempts to validate Stirling engine computer models with test data have demonstrated that engine thermodynamic losses need better characterization. Various Stirling engine thermodynamic losses and efforts that are underway to characterize these losses are discussed.

  11. Comparison of optic area measurement using fundus photography and optical coherence tomography between optic nerve head drusen and control subjects.

    Science.gov (United States)

    Flores-Rodríguez, Patricia; Gili, Pablo; Martín-Ríos, María Dolores; Grifol-Clar, Eulalia

    2013-03-01

    To compare optic disc area measurement between optic nerve head drusen (ONHD) and control subjects using fundus photography, time-domain optical coherence tomography (TD-OCT) and spectral-domain optical coherence tomography (SD-OCT). We also made a comparison between each of the three techniques. We performed our study on 66 eyes (66 patients) with ONHD and 70 healthy control subjects (70 controls) with colour ocular fundus photography at 20º (Zeiss FF 450 IR plus), TD-OCT (Stratus OCT) with the Fast Optic Disc protocol and SD-OCT (Cirrus OCT) with the Optic Disc Cube 200 × 200 protocol for measurement of the optic disc area. The measurements were made by two observers and in each measurement a correction of the image magnification factor was performed. Measurement comparison using the Student's t-test/Mann-Whitney U test, the intraclass correlation coefficient, Pearson/Spearman rank correlation coefficient and the Bland-Altman plot was performed in the statistical analysis. Mean and standard deviation (SD) of the optic disc area in ONHD and in controls was 2.38 (0.54) mm(2) and 2.54 (0.42) mm(2), respectively with fundus photography; 2.01 (0.56) mm(2) and 1.66 (0.37) mm(2), respectively with TD-OCT, and 2.03 (0.49) mm(2) and 1.75 (0.38) mm(2), respectively with SD-OCT. In ONHD and controls, repeatability of optic disc area measurement was excellent with fundus photography and optical coherence tomography (TD-OCT and SD-OCT), but with a low degree of agreement between both techniques. Optic disc area measurement is smaller in ONHD compared to healthy subjects with fundus photography, unlike time-domain and spectral-domain optical coherence tomography in which the reverse is true. Both techniques offer good repeatability, but a low degree of correlation and agreement, which means that optic disc area measurement is not interchangeable or comparable between techniques. Ophthalmic & Physiological Optics © 2013 The College of Optometrists.

  12. Developing Energy Technology Course for Undergraduate Engineering Management Study Program in Lake Toba Area with Particular Focus to Sustainable Energy Systems in Development Context

    Science.gov (United States)

    Manik, Yosef; Sinaga, Rizal; Saragi, Hadi

    2018-02-01

    Undergraduate Engineering Management Study Program of Institut Teknologi Del is one of the pioneers for its field in Indonesia. Located in Lake Toba Area, this study program has a mission to provide high quality Engineering Management education that produces globally competitive graduates who in turn will contribute to local development. Framing the Energy Technology course—one of the core subjects in Engineering Management Body of Knowledge—in the context of sustainable development of Lake Toba Area is very essential. Thus, one particular focus in this course is sustainable energy systems in local development context that incorporates identification and analysis of locally available energy resources. In this paper we present our experience in designing such course. In this work, we introduce the domains that shape the Engineering Management Body of Knowledge. Then, we explain the results of our evaluation on the key considerations to meet the rapidly changing needs of society in local context. Later, we present the framework of the learning outcomes and the syllabus as a result of mapping the road map with the requirement. At the end, the summary from the first two semesters of delivering this course in academic year 2015/2016 and 2016/2017 are reported.

  13. Fourier power, subjective distance and object categories all provide plausible models of BOLD responses in scene-selective visual areas

    Directory of Open Access Journals (Sweden)

    Mark Daniel Lescroart

    2015-11-01

    Full Text Available Perception of natural visual scenes activates several functional areas in the human brain, including the Parahippocampal Place Area (PPA, Retrosplenial Complex (RSC, and the Occipital Place Area (OPA. It is currently unclear what specific scene-related features are represented in these areas. Previous studies have suggested that PPA, RSC, and/or OPA might represent at least three qualitatively different classes of features: (1 2D features related to Fourier power; (2 3D spatial features such as the distance to objects in a scene; or (3 abstract features such as the categories of objects in a scene. To determine which of these hypotheses best describes the visual representation in scene-selective areas, we applied voxel-wise modeling (VM to BOLD fMRI responses elicited by a set of 1,386 images of natural scenes. VM provides an efficient method for testing competing hypotheses by comparing predictions of brain activity based on encoding models that instantiate each hypothesis. Here we evaluated three different encoding models that instantiate each of the three hypotheses listed above. We used linear regression to fit each encoding model to the fMRI data recorded from each voxel, and we evaluated each fit model by estimating the amount of variance it predicted in a withheld portion of the data set. We found that voxel-wise models based on Fourier power or the subjective distance to objects in each scene predicted much of the variance predicted by a model based on object categories. Furthermore, the response variance explained by these three models is largely shared, and the individual models explain little unique variance in responses. Based on an evaluation of previous studies and the data we present here, we conclude that there is currently no good basis to favor any one of the three alternative hypotheses about visual representation in scene-selective areas. We offer suggestions for further studies that may help resolve this issue.

  14. Fourier power, subjective distance, and object categories all provide plausible models of BOLD responses in scene-selective visual areas

    Science.gov (United States)

    Lescroart, Mark D.; Stansbury, Dustin E.; Gallant, Jack L.

    2015-01-01

    Perception of natural visual scenes activates several functional areas in the human brain, including the Parahippocampal Place Area (PPA), Retrosplenial Complex (RSC), and the Occipital Place Area (OPA). It is currently unclear what specific scene-related features are represented in these areas. Previous studies have suggested that PPA, RSC, and/or OPA might represent at least three qualitatively different classes of features: (1) 2D features related to Fourier power; (2) 3D spatial features such as the distance to objects in a scene; or (3) abstract features such as the categories of objects in a scene. To determine which of these hypotheses best describes the visual representation in scene-selective areas, we applied voxel-wise modeling (VM) to BOLD fMRI responses elicited by a set of 1386 images of natural scenes. VM provides an efficient method for testing competing hypotheses by comparing predictions of brain activity based on encoding models that instantiate each hypothesis. Here we evaluated three different encoding models that instantiate each of the three hypotheses listed above. We used linear regression to fit each encoding model to the fMRI data recorded from each voxel, and we evaluated each fit model by estimating the amount of variance it predicted in a withheld portion of the data set. We found that voxel-wise models based on Fourier power or the subjective distance to objects in each scene predicted much of the variance predicted by a model based on object categories. Furthermore, the response variance explained by these three models is largely shared, and the individual models explain little unique variance in responses. Based on an evaluation of previous studies and the data we present here, we conclude that there is currently no good basis to favor any one of the three alternative hypotheses about visual representation in scene-selective areas. We offer suggestions for further studies that may help resolve this issue. PMID:26594164

  15. Intra-Rater Reliability of Rehabilitative Ultrasound Imaging for Multifidus Muscles Thickness and Cross Section Area in Healthy Subjects.

    Science.gov (United States)

    Hosseinifar, Mohammad; Akbari, Asghar; Ghiasi, Fateme

    2015-07-07

    Rehabilitative Ultrasound Imaging (RUSI) must be valuable method for research and rehabilitation. So, the reliability of its measurements must be determined. The purpose of this study was to evaluate the intra-rater reliability of RUSI for measurement of multifidus (MF) muscles cross section areas (CSAs), bladder wall diameter, and thickness of MF muscles between 2 sessions in healthy subjects. Fifteen healthy subjects through simple non-probability sampling participated in this single-group repeated-measures reliability study. MF muscles thickness at rest and during contraction, MF muscles CSAs at rest, and bladder diameters at rest and during pelvic floor muscles (PFM) contraction were measured through RUSI. Pearson's correlation coefficient test was used to determine intra-rater reliability of variables. The results showed that intra-class correlation Coefficient (ICCs) values with 95% confidence interval (CI) and the standard error of the measurement (SEM) were good to excellent agreement for a single investigator between measurement occasions. The intra-rater reliability for the bladder wall displacement was high (ICCs for rest and PFM contraction state: 0.96 and 0.95 respectively), for the MF muscles CSAs at the L4 level was good to high (ICCs 0.75 and 0.91 for right (Rt) and left (Lt) side respectively), and for the thickness of MF muscles at two levels, at rest and during two tasks was moderate to high (ICCs: 0.64 to 0.87). The Trans-Abdominal (TA) method of RUSI is a reliable method to quantify the PFM contraction in healthy subjects. Also, the RUSI is a reliable method to measure the MF muscles CSAs, the MF muscles thickness at rest and during functional tasks in healthy subjects.

  16. Software engineering

    CERN Document Server

    Sommerville, Ian

    2016-01-01

    For courses in computer science and software engineering The Fundamental Practice of Software Engineering Software Engineering introduces readers to the overwhelmingly important subject of software programming and development. In the past few years, computer systems have come to dominate not just our technological growth, but the foundations of our world's major industries. This text seeks to lay out the fundamental concepts of this huge and continually growing subject area in a clear and comprehensive manner. The Tenth Edition contains new information that highlights various technological updates of recent years, providing readers with highly relevant and current information. Sommerville's experience in system dependability and systems engineering guides the text through a traditional plan-based approach that incorporates some novel agile methods. The text strives to teach the innovators of tomorrow how to create software that will make our world a better, safer, and more advanced place to live.

  17. Gamma Ray Large Area Space Telescope (GLAST) Balloon Flight Engineering Model: Overview

    Science.gov (United States)

    Thompson, D. J.; Godfrey, G.; Williams, S. M.; Grove, J. E.; Mizuno, T.; Sadrozinski, H. F.-W.; Kamae, T.; Ampe, J.; Briber, Stuart; Dann, James; hide

    2001-01-01

    The Gamma Ray Large Area Space Telescope (GLAST) Large Area Telescope (LAT) is a pair-production high-energy (greater than 20 MeV) gamma-ray telescope being built by an international partnership of astrophysicists and particle physicists for a satellite launch in 2006, designed to study a wide variety of high-energy astrophysical phenomena. As part of the development effort, the collaboration has built a Balloon Flight Engineering Model (BFEM) for flight on a high-altitude scientific balloon. The BFEM is approximately the size of one of the 16 GLAST-LAT towers and contains all the components of the full instrument: plastic scintillator anticoincidence system (ACD), high-Z foil/Si strip pair-conversion tracker (TKR), CsI hodoscopic calorimeter (CAL), triggering and data acquisition electronics (DAQ), commanding system, power distribution, telemetry, real-time data display, and ground data processing system. The principal goal of the balloon flight was to demonstrate the performance of this instrument configuration under conditions similar to those expected in orbit. Results from a balloon flight from Palestine, Texas, on August 4, 2001, show that the BFEM successfully obtained gamma-ray data in this high-background environment.

  18. Dynamic Analysis for a Geared Turbofan Engine with Variable Area Fan Nozzle

    Science.gov (United States)

    Csank, Jeffrey T.; Thomas, George L.

    2017-01-01

    Aggressive design goals have been set for future aero-propulsion systems with regards to fuel economy, noise, and emissions. To meet these challenging goals, advanced propulsion concepts are being explored and current operating margins are being re-evaluated to find additional concessions that can be made. One advanced propulsion concept being evaluated is a geared turbofan with a variable area fan nozzle (VAFN), developed by NASA. This engine features a small core, a fan driven by the low pressure turbine through a reduction gearbox, and a shape memory alloy (SMA)-actuated VAFN. The VAFN is designed to allow both a small exit area for efficient operation at cruise, while being able to open wider at high power conditions to reduce backpressure on the fan and ensure a safe level of stall margin is maintained. The VAFN is actuated via a SMA-based system instead of a conventional system to decrease overall weight of the system, however, SMA-based actuators respond relatively slowly, which introduces dynamic issues that are investigated in this work. This paper describes both a control system designed specifically for issues associated with SMAs, and dynamic analysis of the geared turbofan VAFN with the SMA actuators. Also, some future recommendations are provided for this type of propulsion system.

  19. Morphological changes in paraurethral area after introduction of tissue engineering construct on the basis of adipose tissue stromal cells.

    Science.gov (United States)

    Makarov, A V; Arutyunyan, I V; Bol'shakova, G B; Volkov, A V; Gol'dshtein, D V

    2009-10-01

    We studied morphological changes in the paraurethral area of Wistar rats after introduction of tissue engineering constructs on the basis of multipotent mesenchymal stem cells and gelatin sponge. The tissue engineering construct containing autologous culture of the stromal fraction of the adipose tissue was most effective. After introduction of this construct we observed more rapid degradation of the construct matrix and more intensive formation of collagen fibers.

  20. Volcanic hazards of the Idaho National Engineering Laboratory and adjacent areas

    Energy Technology Data Exchange (ETDEWEB)

    Hackett, W.R. [WRH Associates, Salt Lake City, UT (United States); Smith, R.P. [Lockheed Idaho Technologies Co., Idaho Falls, ID (United States)

    1994-12-01

    Potential volcanic hazards are assessed, and hazard zone maps are developed for the Idaho National Engineering Laboratory (INEL) and adjacent areas. The basis of the hazards assessment and mapping is the past volcanic history of the INEL region, and the apparent similarity of INEL volcanism with equivalent, well-studied phenomena in other regions of active volcanism, particularly Hawaii and Iceland. The most significant hazards to INEL facilities are associated with basaltic volcanism, chiefly lava flows, which move slowly and mainly threaten property by inundation or burning. Related hazards are volcanic gases and tephra, and ground disturbance associated with the ascent of magma under the volcanic zones. Several volcanic zones are identified in the INEL area. These zones contain most of the volcanic vents and fissures of the region and are inferred to be the most probable sites of future INEL volcanism. Volcanic-recurrence estimates are given for each of the volcanic zones based on geochronology of the lavas, together with the results of field and petrographic investigations concerning the cogenetic relationships of INEL volcanic deposits and associated magma intrusion. Annual probabilities of basaltic volcanism within the INEL volcanic zones range from 6.2 {times} 10{sup {minus}5} per year (average 16,000-year interval between eruptions) for the axial volcanic zone near the southern INEL boundary and the Arco volcanic-rift zone near the western INEL boundary, to 1 {times} 10{sup {minus}5} per year (average 100,000-year interval between eruptions) for the Howe-East Butte volcanic rift zone, a geologically old and poorly defined feature of the central portion of INEL. Three volcanic hazard zone maps are developed for the INEL area: lava flow hazard zones, a tephra (volcanic ash) and gas hazard zone, and a ground-deformation hazard zone. The maps are useful in land-use planning, site selection, and safety analysis.

  1. Interval estimation for the area under the receiver operating characteristic curve when data are subject to error.

    Science.gov (United States)

    Li, Yanhong; Koval, John J; Donner, Allan; Zou, G Y

    2010-10-30

    The area (A) under the receiver operating characteristic curve is commonly used to quantify the ability of a biomarker to correctly classify individuals into two populations. However, many markers are subject to measurement error, which must be accounted for to prevent understating their effectiveness. In this paper, we develop a new confidence interval procedure for A which is adjusted for measurement error using either external or internal replicated measurements. Based on the observation that A is a function of normal means and variances, we develop the procedure by recovering variance estimates needed from confidence limits for normal means and variances. Simulation results show that the procedure performs better than the previous ones based on the delta-method in terms of coverage percentage, balance of tail errors and interval width. Two examples are presented. Copyright © 2010 John Wiley & Sons, Ltd.

  2. Idaho National Engineering Laboratory, Test Area North, Hangar 629 -- Photographs, written historical and descriptive data

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    The report describes the history of the Idaho National Engineering Laboratory`s Hangar 629. The hangar was built to test the possibility of linking jet engine technology with nuclear power. The history of the project is described along with the development and eventual abandonment of the Flight Engine Test hangar. The report contains historical photographs and architectural drawings.

  3. A case study of full integration of the arts into core subject area instruction in one East Texas secondary school

    Science.gov (United States)

    Leysath, Maggie

    This exploratory phenomenological case study investigated the influence the full integration of the arts into core subject instruction has on classroom environment, student academic achievement, and student engagement as perceived by administrators, teachers, and students in one East Texas secondary school. Participant interviews were analyzed using Creswell's (2012) six-step method for analyzing phenomenological studies. The researcher implemented three learning activities in which ceramics learning objectives were fully integrated with chemistry learning objectives. The first activity combined clay properties and pottery wheel throwing with significant numbers. The second activity combined glaze formulation with moles. The third combined stoichiometry with the increased glaze formula for students to glaze the bowls they made. Findings suggest the full integration of art in core subject area instruction has numerous positive effects. Participants reported improved academic achievement for all students including reluctant learners. Students, teachers, and the administrator reported greater participation in the art integrated activities. Participants perceived a need for further training for teachers and administrators for greater success.

  4. Engineering Evaluation/Cost Analysis (EE/CA) for Decommissioning of TAN-607 Hot Shop Area

    Energy Technology Data Exchange (ETDEWEB)

    J. P. Floerke

    2007-02-05

    Area in a final configuration that will be protective of human health and the environment. Decommissioning the TAN-607 Hot Shop Area is consistent with the joint DOE and U.S. Environmental Protection Agency (EPA) Policy on Decommissioning of Department of Energy Facilities Under the Comprehensive Environmental Response, Compensation and Liability Act, which establishes the CERCLA NTCRA process as the preferred approach for decommissioning surplus DOE facilities. Under this policy, a NTCRA may be taken when DOE determines that the action will prevent, minimize, stabilize, or eliminate a risk to human health and/or the environment. When DOE determines that a CERCLA NTCRA is necessary, DOE is authorized to evaluate, select, and implement the removal action that DOE determines is most appropriate to address the potential risk posed by the release or threat of release. This action is taken in accordance with applicable authorities and in conjunction with EPA and the State of Idaho pursuant to Section 5.3 of the Federal Facility Agreement and Consent Order. In keeping with the joint policy, this engineering evaluation/cost analysis (EE/CA) was developed in accordance with CERCLA as amended by the ''Superfund Amendments and Reauthorization Act of 1986'' and in accordance with the ''National Oil and Hazardous Substances Pollution Contingency Plan.'' This EE/CA is consistent with the remedial action objectives (RAOs) of the Final Record of Decision, Test Area North, Operable Unit 1-10 and supports the overall remediation goals established through the Federal Facility Agreement and Consent Order for Waste Area Group 1. Waste Area Group 1 is located at TAN.

  5. The response of teachers to new subject areas in a national science curriculum: The case of the earth science component

    Science.gov (United States)

    King, Chris

    2001-11-01

    The National Curriculum for Science (NCS) introduced to schools in England and Wales in 1989 contained an earth science component that was new to many secondary science teachers. Ten years after this introduction, a survey was undertaken to test teacher perception of the effectiveness of their teaching in this subject area that was new to them, and to identify factors that might affect this effectiveness. The information gained has been used in reviewing possible curriculum changes and in developing professional development strategies that would improve the effectiveness of NCS earth science teaching. The data collected from science teachers who are currently teaching this earth science component revealed that their background knowledge of earth science from their own education was generally poor, even though most of them considered their knowledge to be moderate. The teachers indicated that the achievement of their pupils in earth science is moderate, while reports on national testing show it is poor. They reported that their main sources of earth science knowledge and understanding were science textbooks written for 11- to 16-year-old pupils (with their small earth science content of variable quality) and science colleagues (who often have poor earth science backgrounds too). Most teachers indicated that they needed more support in this area. Overall, the data indicated that while teachers consider their teaching in this area to be moderate, other evidence suggests it is poor. If this situation is not to continue it should be addressed. In the longer term the emphasis on the earth science content of the National Science Curriculum could be changed (either enhanced or reduced) within larger scale curriculum changes. Until such curriculum change takes place, effective methods of professional development should be instituted so that teachers have a much improved basis on which to build their earth science teaching. Similar measures would be necessary in other

  6. Engineering geology of the Geysers Geothermal Resource Area, Lake, Mendocino, and Sonoma Counties, California. Special report 122

    Energy Technology Data Exchange (ETDEWEB)

    Bacon, C.F.; Amimoto, P.Y.; Sherburne, R.W.; Slosson, J.E.

    1976-01-01

    Guidelines for the engineering geology assessment of The Geysers Geothermal Resource Area (GRA) are presented. Approximately 50 percent of the geothermal wells and some of the power plants are presently located on landslide areas. Several geothermal wells have failed, causing additional land instability, loss of energy resource, and unnecessary expense. Hazardous geologic conditions in the area are identified, and measures for mitigating those hazardous conditions are recommended. Such measures or other equally adequate measures should be considered for any proposed development activity in The Geysers area.

  7. The Measurement of Relevance Amount of Documents That By Using of Google cross-language retrieval About Agriculture Subject Area are Retrieved

    Directory of Open Access Journals (Sweden)

    Fatemeh Jamshidi Ghahfarokhi

    2014-02-01

    Full Text Available In this study, the relevance amount of documents has been investigated by using google cross-language retrieval tools about a agriculture subject area in cross-language retrieval form, are retrieved. For this purpose, by using Persian journals articles that have had English abstracts, Persian phrases and subject terms with their English equivalent were extracted. In three class us, thirty number of phrases and subject terms of agriculture area were extracted: First class, subject phrases that only in agriculture are used; Secondary, agriculture subject terms that in other fields are used too; Third class, agriculture subject terms that out of this field are considered as public term. Then by these phrases and terms, documents were searched, and relevance amount of search results are investigated. Results of study showed that google cross-language retrieval tools for two classes of phrases and terms, in cross-language retrieval of relevance document about agriculture subject area, aren`t succeed: one class, agriculture subject terms that in other fields are used too. other class, agriculture subject terms that out of agriculture field are considered as public term. Google cross-language retrieval tools about subject phrase and terms that only in agriculture field are used, are performance rather desirable than other two class of phrase and terms

  8. Cytogenetic analysis chromosomal status of subjects from the regions in the vicinity of uranium-contaminated areas

    Energy Technology Data Exchange (ETDEWEB)

    Jovicic, D.; Milacie, S.; Kovacevic, R.; Petrovic, I.

    2004-07-01

    The past application of nuclear technology has brought about free emission of numerous Due to the military application of the depleted uranium (DU) in our country, the problem of its radioactivity and hemo toxicity if actualized. Likewise every heavy metal, its is highly toxic and, in addition to it, also radioactive: Interaction of the water-soluble uranium forms with soil is an important effect. In this way, it penetrates into food chain and endangers human health. The study was aimed at determining possible karyotype genotoxic effects in individuals from the regions close to the contaminated areas. Biological dosimetry was performed using modified Moorthead's micromethod. Our studies included the targeted group of 29 patients from the affected regions. The subjects were averagely aged 39.5{+-}2.8 years. Average age of the control group (k), unexposed to the effects of the known genotoxic agents comprising 22 individuals was 28.3{+-}1.2 years. The presented data evidenced that increased incidence of the chromosomal aberrations was found in 6 subjects,accounting for 20.6%. Dicentric type changes were evidence, as well ring chromosomes and eccentric fragments, which are, at the same time the most frequent aberrations. The changes are considered reparable aberrations accounting for 2-3% in metaphases of the unexposed individuals. Statistical data processing evidenced significant difference (p<0.005) between structural chromosomal aberrations in the studied and control groups, as well as in the number of chromatid aberrations (p<0.05).Based on the obtained data it may be concluded that human karyotype changes were present in the studied group, resulting from interaction of ionizing irradiation and other genotoxic agents, with possibility of potent synergistic effects. It is necessary to stress the importance of further monitoring and control of the general population health, particularly due to possible late genetic effects that may affect future generations

  9. Experimental Altitude Performance of JP-4 Fuel and Liquid-Oxygen Rocket Engine with an Area Ratio of 48

    Science.gov (United States)

    Fortini, Anthony; Hendrix, Charles D.; Huff, Vearl N.

    1959-01-01

    The performance for four altitudes (sea-level, 51,000, 65,000, and 70,000 ft) of a rocket engine having a nozzle area ratio of 48.39 and using JP-4 fuel and liquid oxygen as a propellant was evaluated experimentally by use of a 1000-pound-thrust engine operating at a chamber pressure of 600 pounds per square inch absolute. The altitude environment was obtained by a rocket-ejector system which utilized the rocket exhaust gases as the pumping fluid of the ejector. Also, an engine having a nozzle area ratio of 5.49 designed for sea level was tested at sea-level conditions. The following table lists values from faired experimental curves at an oxidant-fuel ratio of 2.3 for various approximate altitudes.

  10. The students' interest for 2012 and 2013 cohort in construction engineering vocational education program Universitas Negeri Semarang in choosing the subject specialization

    Science.gov (United States)

    Julianto, Eko Nugroho; Salamah, Ummu

    2017-03-01

    On the 2012 curriculum, Vocational Education Program Universitas Negeri Semarang allowed the students to choose subjects for their specialization according to their ability. The subject specialization was given at the 6th semester to provide students in performing field work experience. Each course has its own enthusiasts specialization, students have certain considerations in selecting the course. The consideration of each of them is different from one another because they have their own talents, interests, aspirations and perceptions or a different view in assessing a subject specialization offered by Construction Engineering Vocational Education Program. The purpose of this study was to determine the amount of interest caused by intrinsic and extrinsic factors on 2012 and 2013 students' cohort in selecting subjects of specialization. This research is descriptive with quantitative approach, which is carried out to determine the magnitude of the interest students in choosing courses of specialization. Research conducted at the Civil Engineering Department Universitas Negeri Semarang, with research subjects that students PTB forces in 2012 and 2013, with a total sample of 87 students. The results showed that the interest of the student of 2012 and 2013 in selecting subjects of specialization is equal to 68.06% with the criteria are interested in contributions from intrinsic factors indicate the yield at 35.48% and 64.52% extrinsic factors.

  11. The Measurement of Relevance Amount of Documents That By Using of Google cross-language retrieval About Agriculture Subject Area are Retrieved

    National Research Council Canada - National Science Library

    Fatemeh Jamshidi Ghahfarokhi

    2014-01-01

    In this study, the relevance amount of documents has been investigated by using google cross-language retrieval tools about a agriculture subject area in cross-language retrieval form, are retrieved...

  12. Experimental Performance of Area Ratio 200, 25 and 8 Nozzles on JP-4 Fuel and Liquid Oxygen Rocket Engine

    Science.gov (United States)

    Lovell, J. Calvin; Samanich, Nick E.; Barnett, Donald O.

    1960-01-01

    The performance of an area ratio 200 bell-shaped nozzle, an area ratio 25 bell-shaped nozzle, and an area ratio 8 conic nozzle on a JP-4 fuel and liquid-oxygen rocket engine has been determined. Tests were conducted using a nominal 4000-pound-thrust rocket in the Lewis 10- by 10-foot supersonic tunnel, which provided the altitude environment needed for fully expanded nozzle flow. The area ratio 200 nozzle had a vacuum thrust coefficient of 1.96, compared with 1.82 and 1.70 for the area ratio 25 and 8 nozzles, respectively. These values are approximately equal to those for theoretical frozen expansion. The measured value of vacuum specific impulse for the area ratio 200 nozzle was 317 seconds for a combustion-chamber characteristic velocity of 5200 feet per second. The vacuum-specific-impulse increase for the area-ratio increase from 8 to 200 was 46 seconds.

  13. Teaching Interview Skills to Undergraduate Engineers: An Emerging Area of Library Instruction

    Science.gov (United States)

    Nelson, Megan Sapp

    2009-01-01

    Librarianship is one of a limited number of disciplines that deliberately learn and practice the art of the interview. For engineering librarians, this gives expertise and a role in teaching professional skills that are increasingly expected in the engineering profession. The reference interview and design interview have many similarities. Some…

  14. [Psychosocial stressors, sense of community, and subjective wellbeing in children and adolescents in urban and rural areas in Northeast Brazil].

    Science.gov (United States)

    Abreu, Desirée Pereira de; Viñas, Ferran; Casas, Ferran; Montserrat, Carme; González-Carrasco, Mònica; Alcantara, Stefania Carneiro de

    2016-09-19

    The study's overall objective was to investigate the relationship between psychosocial stressors, sense of community, and subjective wellbeing in urban and rural schoolchildren in Northeast Brazil, focusing on differences according to territorial context. The sample consisted of 757 participants, 495 from urban schools and 262 from rural schools, enrolled in the 6th and 7th grades (9 to 18 years of age) in 21 municipal and state public schools, of which 13 urban and 8 rural, in 7 municipalities (counties) in Ceará State, Brazil. The study instruments were inventory of stressful events, scale of life satisfaction for students, index of sense of community, and satisfaction indices by life domains (family, material goods, relations, neighborhood/zone, health, time, school, and personal). The results indicate that socioeconomically underprivileged public schoolchildren from urban areas are more exposed to daily stress and score lower on satisfaction in specific domains of life and on sense of community. This latter is an important indicator for evaluating wellbeing in this young population.

  15. Improvement on Main/backup Controller Switching Device of the Nozzle Throat Area Control System for a Turbofan Aero Engine

    Science.gov (United States)

    Li, Jie; Duan, Minghu; Yan, Maode; Li, Gang; Li, Xiaohui

    2014-06-01

    A full authority digital electronic controller (FADEC) equipped with a full authority hydro-mechanical backup controller (FAHMBC) is adopted as the nozzle throat area control system (NTACS) of a turbofan aero engine. In order to ensure the switching reliability of the main/backup controller, the nozzle throat area control switching valve was improved from three-way convex desktop slide valve to six-way convex desktop slide valve. Simulation results show that, if malfunctions of FAEDC occur and abnormal signals are outputted from FADEC, NTACS will be seriously influenced by the main/backup controller switching in several working states, while NTACS will not be influenced by using the improved nozzle throat area control switching valve, thus the controller switching process will become safer and smoother and the working reliability of this turbofan aero engine is improved by the controller switching device improvement.

  16. Technology, Science, Physics and Culture: Scientific View of the World as a Non-technical Subject in Engineering Education.

    Science.gov (United States)

    Jelen, Josef

    1997-01-01

    Argues that technology stems from science, and science represents important and specific values in the whole of culture. Such topics can contribute to educating the whole and balanced engineer. Describes a course taught at the Czech Technical University in Prague on the scientist's understanding of the world. (Author/PVD)

  17. Engineering Encounters: Engineering Adaptations

    Science.gov (United States)

    Gatling, Anne; Vaughn, Meredith Houle

    2015-01-01

    Engineering is not a subject that has historically been taught in elementary schools, but with the emphasis on engineering in the "Next Generation Science Standards," curricula are being developed to explicitly teach engineering content and design. However, many of the scientific investigations already conducted with students have…

  18. Information integration in the functional areas "Supply Logistics" and "Production Logistics" in the management of engineering company

    OpenAIRE

    Simonova, Larisa; Shutova, Polina

    2013-01-01

    The article is devoted to the development of expert system for the management of material, financial and information flows in the functional areas “Supply Logistics” and “Production Logistics” within the product lifecycle management for engineering companies. A model of the product life cycle that characterizes the stage of procurement, production preparation and production of the product. Clarified the definition of “Integrated Logistics Support.” Research in the field of logistics, prese...

  19. Experimental Comparison of Speed : Fuel-flow and Speed-area Controls on a Turbojet Engine for Small Step Disturbances

    Science.gov (United States)

    Wenzel, L M; Hart, C E; Craig, R T

    1957-01-01

    Optimum proportional-plus-integral control settings for speed - fuel-flow control, determined by minimization of integral criteria, correlated well with analytically predicted optimum settings. Engine response data are given for a range of control settings around the optimum. An inherent nonlinearity in the speed-area loop necessitated the use of nonlinear controls. Response data for two such nonlinear control schemes are presented.

  20. Tribological studies of eutectic Aluminum-Silicon alloys used for automotive engine blocks subjected to sliding wear damage

    Science.gov (United States)

    Xue, Guijun

    The microstructures and wear performances of linerless engine cylinder blocks made of two eutectic Al-Si alloys with different Si morphologies were characterized after the engine tests. Overall, both the Al-11 wt. % Si alloy and the Al-12.6 wt. % Si alloy provided similar wear performance. Block-on-ring wear tests were applied to the Al-11% Si alloy. The MW regime in air consisted of two sub-regimes: MW-1 and MW-2. The argon atmosphere produced a 10-fold reduction in wear rates and the formation of LMW regime at loads less than 10 N. The metallic tribolayers formed in the MW under argon atmosphere were uniform and stable, resulting lower wear rates than those in air. The mechanism of material removal under argon atmosphere was delimination. The SW occurring in argon was observed at a relatively low load, compared to an air atmosphere. Wear was also more sensitive to applied load in the argon atmosphere.

  1. Structural Behaviour of Precast Reinforced Concrete Frames on a Non-Engineered Building Subjected to Lateral Loads

    Directory of Open Access Journals (Sweden)

    Mochamad Teguh

    2016-06-01

    Full Text Available Past earthquakes in Indonesia have caused loss of life and major damage to buildings and infrastructure. Most of the damage was experienced on non-engineered buildings, which were conventionally built with less consideration of earthquake resistant design. In this research, a precast system was introduced for non-engineered building structures to connect their practical beams and columns as a reinforced concrete frame. This paper presents experimental tests on precast reinforced concrete frames with and without infill masonry walls using local materials. All undamaged and repaired specimens were set up with the same loading arrangements where lateral loads were gradually applied to one side of the beam column joint until the ultimate load was reached. Simple retrofitting and strengthening techniques were applied to the damaged specimens were conducted. The results were compared based on the experimental tests, and showed that retrofitted and strengthened specimens significantly increased their strength, stiffness, and displacement ductility to improve the structural behaviour of non-engineered building structures.

  2. Labour perspectives of engineering degrees in the European Higher Education Area (EHEA): a case of study in the University of Cordoba (Spain)

    Science.gov (United States)

    Taguas, E. V.; Redel, M. D.; Pérez, R.; Peña, A.

    2009-04-01

    The Bologna process is reaching its final stages and is causing controversy among students. The adaptation of European universities to the European Higher Education Area (EHEA) entails not only the modification of curricular programmes and the nomenclature and duration of degrees, but also the incorporation of new teaching strategies aimed at ensuring that students acquire transversal skills and aptitudes and at increasing student participation in the teaching-learning process. A number of surveys have been carried out during the last few courses among students doing degrees in engineering (Industrial Engineering, Agronomy Engineering and Forestry Engineering). These surveys include questions on their knowledge of Bologna process, its advantages and drawbacks, their opinion about optional masters or doctorate degrees, what perspectives their degrees have on the labour market and suggestions for improvement. Although the different degrees showed notable differences, the content of EHEA is well-known by less than 30% of students, while 40% of them state they know about their perspectives on the labour market. The main advantages of EHEA were related to the improvement of practical knowledge in the subjects, the recognition of degrees in Europe and wider working opportunities. The main drawbacks pointed out were worse and shorter training periods, higher costs and fiercer competition between different degrees. In addition, they suggested that the new degrees are better adjusted to the demands of the labour market. 60% and 40% of them, respectively, approved of Masters degrees and PhDs. These features should be taken into account to organize and improve the contents of the degrees as well as to involve the students in the future of University education.

  3. SRP engineering and design history, Vol III, 200 F and H Areas

    Energy Technology Data Exchange (ETDEWEB)

    Banick, C.J.

    2000-04-17

    This volume combines the record of events relating to the development of design for both the 200-F and H Areas. Chronologically, the definition of plant facilities was first established for the 200-F Area. The second area, 200-H, was projected initially to be a supplementary plutonium separations facility. This history explains the differences in character and capacity of the manufacturing facilities in both areas as production requirements and experience with separations processes advanced.

  4. Using Engineering Design Challenges to Engage Elementary Students with Gifts and Talents across Multiple Content Areas

    Science.gov (United States)

    Dailey, Debbie

    2017-01-01

    With the release of the Next Generation Science Standards and the adoption of the standards by many states, teachers are encouraged to use the engineering design process (EDP) as an instructional approach to teaching science. However, teachers have limited time to teach science and will often neglect science in favor of mathematics and literacy…

  5. MEG reveals a fast pathway from somatosensory cortex to occipital areas via posterior parietal cortex in a blind subject

    DEFF Research Database (Denmark)

    Ioannides, Andreas A; Liu, Lichan; Poghosyan, Vahe

    2013-01-01

    magnetoencephalography (MEG) data recorded from one congenitally blind and two sighted subjects after stimulation of the left and right median nerves at three intensities: below sensory threshold, above sensory threshold and above motor threshold; the last sufficient to produce thumb twitching. We identified...... reproducible brain responses in the primary somatosensory (S1) and motor (M1) cortices at around 20 ms post-stimulus, which were very similar in sighted and blind subjects. Time-frequency analysis revealed strong 45-70 Hz activity at latencies of 20-50 ms in S1 and M1, and posterior parietal cortex Brodmann...... of information through this pathway occurred in stages characterized by convergence of activations into specific cortical regions. In sighted subjects, no linked activity was found that led from the somatosensory to the visual cortex through any of the studied brain regions. These results provide the first...

  6. Reproducibility of fat area measurements in young, non-obese subjects by computerized analysis of magnetic resonance images

    NARCIS (Netherlands)

    Elbers, J.M.; Haumann, G.; Asscheman, H.; Seidell, J C; Gooren, Louis J G

    1997-01-01

    OBJECTIVE: To assess reproducibility, expressed as both inter-observer variability and intra-observer variability, of fat area measurements on images obtained by magnetic resonance (MR); to compare variability between fat area measurements, calculated from a single image per body region and from the

  7. Experience of Use of Knowledge Relative Assessment System for Training in Area of Civil Engineering

    Directory of Open Access Journals (Sweden)

    Romanova Elena

    2017-01-01

    Full Text Available Nowadays E-Learning is becoming more and more relevant in training civil engineers. Electronic resources are used for classroom activities and for independent work. It allows allocating extra time for development of practical skills. Experience of remote knowledge control application in the educational process of Moscow State University of Civil Engineering is presented in the article. The control system is called Knowledge Relative Assessment System using Bekker's method. The following steps of system using are described in detail in the article: loading test material, action of users, protection from wrong acts and calculation of rating. The main merits and demerits from the point of view of teachers and students are listed.

  8. Definition of design criteria of mechanical transfer: an interaction between engineering and health areas.

    Science.gov (United States)

    Luz, Taciana Ramos; Echternacht, Eliza Helena de Oliveira

    2012-01-01

    This study aims to analyze the factors that justify the low use of a mechanical transfer in the context of a long-term institution. It is a device intended for internal transportation of individuals who have mobility problems. The analysis involves researchers from the fields of health and engineering in order to generate design criteria that consider the needs of caregivers and patients of this institution. To understand the reality of this site and their specificities, was used Ergonomic Work Analysis.

  9. Parallels between Objective Indicators and Subjective Perceptions of Quality of Life: A Study of Metropolitan and County Areas in Taiwan

    Science.gov (United States)

    Liao, Pei-shan

    2009-01-01

    This study explores the consistency between objective indicators and subjective perceptions of quality of life in a ranking of survey data for cities and counties in Taiwan. Data used for analysis included the Statistical Yearbook of Hsiens and Municipalities and the Survey on Living Conditions of Citizens in Taiwan, both given for the year 2000.…

  10. Subjectivity in Education and Health: Research Notes on School Learning Area and Physical Education in Mental Health

    Science.gov (United States)

    Bezerra, Marilia; da Costa, Jonatas Maia

    2016-01-01

    This paper presents the results of two studies researching the theory of subjectivity from a cultural-historical perspective. The studies are situated in the fields of education and health and are conducted using Qualitative Epistemology. The first study discusses the pathological movement problems of learning disabilities in Brazilian schools and…

  11. Savannah River Plant, Project 8980: Engineering and design history of No. 400 Area. Volume 5

    Energy Technology Data Exchange (ETDEWEB)

    1957-01-01

    The description and development, selection and descriptions of processes, design, and specialized design problems are presented for the 400-D Area at the Savannah River Plant. These facilities were used for the production of high purity heavy water for use as a moderator and coolant in the 100 Areas. Also, deuterium gas and hydrogen sulfide were produced here.

  12. Advanced Engine Cycles Analyzed for Turbofans With Variable-Area Fan Nozzles Actuated by a Shape Memory Alloy

    Science.gov (United States)

    Berton, Jeffrey J.

    2002-01-01

    Advanced, large commercial turbofan engines using low-fan-pressure-ratio, very high bypass ratio thermodynamic cycles can offer significant fuel savings over engines currently in operation. Several technological challenges must be addressed, however, before these engines can be designed. To name a few, the high-diameter fans associated with these engines pose a significant packaging and aircraft installation challenge, and a large, heavy gearbox is often necessary to address the differences in ideal operating speeds between the fan and the low-pressure turbine. Also, the large nacelles contribute aerodynamic drag penalties and require long, heavy landing gear when mounted on conventional, low wing aircraft. Nevertheless, the reduced fuel consumption rates of these engines are a compelling economic incentive, and fans designed with low pressure ratios and low tip speeds offer attractive noise-reduction benefits. Another complication associated with low-pressure-ratio fans is their need for variable flow-path geometry. As the design fan pressure ratio is reduced below about 1.4, an operational disparity is set up in the fan between high and low flight speeds. In other words, between takeoff and cruise there is too large a swing in several key fan parameters-- such as speed, flow, and pressure--for a fan to accommodate. One solution to this problem is to make use of a variable-area fan nozzle (VAFN). However, conventional, hydraulically actuated variable nozzles have weight, cost, maintenance, and reliability issues that discourage their use with low-fan-pressure-ratio engine cycles. United Technologies Research, in cooperation with NASA, is developing a revolutionary, lightweight, and reliable shape memory alloy actuator system that can change the on-demand nozzle exit area by up to 20 percent. This "smart material" actuation technology, being studied under NASA's Ultra-Efficient Engine Technology (UEET) Program and Revolutionary Concepts in Aeronautics (Rev

  13. [Left ventricular hypertrophy in black African subjects with artery hypertension: Results of a cross-sectional survey conducted in semi-rural area in Senegal].

    Science.gov (United States)

    Mbaye, A; Dodo, B; Ngaïde, A A; Sy, N F; Babaka, K; Mingou, J S; Faye, M; Niang, K; Sarr, S A; Dioum, M; Bodian, M; Ndiaye, M B; Kane, A D; Ndour-Mbaye, M; Diao, M; Diack, B; Kane, M; Diagne-Sow, D; Thiaw, I; Kane, A

    2017-09-01

    To assess the prevalence of left ventricular hypertrophy according to electrocardiographic and echocardiographic criteria among hypertensive patients living in semi-rural Senegalese area. According to the World Health Organization STEPSwise approach, we conducted, in November 2012, a cross-sectional and exhaustive study in the population aged at least 35 years old and living for at least six months in the semi-rural area of Guéoul. We researched electrocardiographic and echocardiographic left ventricular hypertrophy in hypertensive subjects. Data were analyzed with SPSS 18.0 software version. The significance level was agreed for a value of P<0.05. We examined 1411 subjects aged on average of 48.5±12.7 years. In total, 654 subjects were hypertensive and screening of left ventricular hypertrophy (LVH) was effective in 515 of them. According to Sokolow-Lyon index, 86 subjects (16.7%) presented electrocardiographic LVH, more frequently in men (P=0.002). According to Cornell index and Cornell product, LVH was founded respectively in 66 (12.8%) and 52 subjects (10.1%), more frequently in female (P=0.0001; P=0.004). It was more common in grade 3 of hypertension however criteria. In echocardiography, prevalence of LVH was 2.2% (13 cases) according to the left ventricular mass, 9.3% (48 cases) according to the left ventricular mass indexed to body surface area and 8.2% (42 cases) according to the left ventricular mass indexed to height 2.7 . LVH was significantly correlated with the electrocardiographic LVH according to Sokolow-Lyon index (P<0.0001) and the grade 3 of hypertension (P=0.003). Although rare in hypertensive Senegalese living in semi-rural area, left ventricular hypertrophy is correlated with severity of grade of hypertension. Screening by electrocardiogram will allow better follow-up of these hypertensive subjects. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  14. Integrated logistics support - Five key areas of engineering technology in space

    Science.gov (United States)

    Drake, J. M.

    The purpose of this paper is to discuss the concept and elements of integrated logistics support as it applies to the manned space program. Five key areas of technology which are critical in making needed improvements in the support and development of the space transportation systems are identified and discussed in detail. These five areas are: materials, infrastructure, life support systems, operations, and human factors. Each of these areas is presented in relation to how improvements in terrestrial applications and methodology will lead to advances in extraterrestrial systems.

  15. A Multidimensional Software Engineering Course

    Science.gov (United States)

    Barzilay, O.; Hazzan, O.; Yehudai, A.

    2009-01-01

    Software engineering (SE) is a multidimensional field that involves activities in various areas and disciplines, such as computer science, project management, and system engineering. Though modern SE curricula include designated courses that address these various subjects, an advanced summary course that synthesizes them is still missing. Such a…

  16. Reliability and engineering sciences area. Materials research: Single junction thin film

    Science.gov (United States)

    1986-01-01

    A test bench was designed and fabricated for the purpose of improving control of hot-spot test accuracy. Electrochemical corrosion research focused on corrosion mechanisms to which both crystalline and a-Si modules may be subjected in central station applications. A variety of cells and several designs were subjected to accelerated stress tests. Humiditiy degradation rates were determined and key electrochemical failure mechanisms were identified. Software was developed for the prediction of power loss resulting from open circuits in an array field of a-Si modules. Failure analysis was continued on the four ARCO Solar Genesis modules. The interactions of water on the silicon module was examined. An autocatalytic photooxidation model was proposed. The reliability and durability of bonding materials and electrical insulation were also studied.

  17. Robust sensor fault detection and isolation of gas turbine engines subjected to time-varying parameter uncertainties

    Science.gov (United States)

    Pourbabaee, Bahareh; Meskin, Nader; Khorasani, Khashayar

    2016-08-01

    In this paper, a novel robust sensor fault detection and isolation (FDI) strategy using the multiple model-based (MM) approach is proposed that remains robust with respect to both time-varying parameter uncertainties and process and measurement noise in all the channels. The scheme is composed of robust Kalman filters (RKF) that are constructed for multiple piecewise linear (PWL) models that are constructed at various operating points of an uncertain nonlinear system. The parameter uncertainty is modeled by using a time-varying norm bounded admissible structure that affects all the PWL state space matrices. The robust Kalman filter gain matrices are designed by solving two algebraic Riccati equations (AREs) that are expressed as two linear matrix inequality (LMI) feasibility conditions. The proposed multiple RKF-based FDI scheme is simulated for a single spool gas turbine engine to diagnose various sensor faults despite the presence of parameter uncertainties, process and measurement noise. Our comparative studies confirm the superiority of our proposed FDI method when compared to the methods that are available in the literature.

  18. (Im)Perfect robustness and adaptation of metabolic networks subject to metabolic and gene-expression regulation: marrying control engineering with metabolic control analysis

    Science.gov (United States)

    2013-01-01

    Background Metabolic control analysis (MCA) and supply–demand theory have led to appreciable understanding of the systems properties of metabolic networks that are subject exclusively to metabolic regulation. Supply–demand theory has not yet considered gene-expression regulation explicitly whilst a variant of MCA, i.e. Hierarchical Control Analysis (HCA), has done so. Existing analyses based on control engineering approaches have not been very explicit about whether metabolic or gene-expression regulation would be involved, but designed different ways in which regulation could be organized, with the potential of causing adaptation to be perfect. Results This study integrates control engineering and classical MCA augmented with supply–demand theory and HCA. Because gene-expression regulation involves time integration, it is identified as a natural instantiation of the ‘integral control’ (or near integral control) known in control engineering. This study then focuses on robustness against and adaptation to perturbations of process activities in the network, which could result from environmental perturbations, mutations or slow noise. It is shown however that this type of ‘integral control’ should rarely be expected to lead to the ‘perfect adaptation’: although the gene-expression regulation increases the robustness of important metabolite concentrations, it rarely makes them infinitely robust. For perfect adaptation to occur, the protein degradation reactions should be zero order in the concentration of the protein, which may be rare biologically for cells growing steadily. Conclusions A proposed new framework integrating the methodologies of control engineering and metabolic and hierarchical control analysis, improves the understanding of biological systems that are regulated both metabolically and by gene expression. In particular, the new approach enables one to address the issue whether the intracellular biochemical networks that have been and

  19. Demand and Marketing Study at Army Corps of Engineers Day-Use Areas

    Science.gov (United States)

    1994-06-01

    Overlook), Porno (including Cultural Center), Ky-En (including Oak Grove and Marina), and Bu Shay (including Mesa and Inlet). Second, recall that samples...Grand Total 461 Mendocino Lake Day-Use Sample’ Sample She Arem # Vehicles % of Total Area Total Weekday Weekend Porno 16988 42 194 103 91 Ch-ka-ka...23,320 58 268 142 126 Total 40,308 100 462 245 217 Weekday Swmple She by Time Area 6-10 an 10 mn-2 pm 2-6pi 6-10 prn Total Porno 10 21 41 31 103 Che-ka

  20. The main goal of engineering geology for designing and construction complex structures in urban areas

    Directory of Open Access Journals (Sweden)

    Drago Ocepek

    2007-12-01

    Full Text Available Work for designing complex structures in urban areas consists of geological-geotechnical investigations and analysis of the quality of rocks, soft rocks and hard soils in the construction area. Urban areas limited the space for designing cutting slopes in stable inclination without reinforcement. In this paper will be presented designing and excavation works with different reinforcement of two different areas in Slovenia built of heterogeneous mixed hard to soft rock masses (Triassic dolomite, limestone and Eocene flysch sediments.Before the start of excavations work and after establishing the retaining measures, the analysis results are checked by monitoring. This monitoring will continue in the phase of exploitation of the objects. Since the cost of these additional investigations and precise analysis with monitoring (SIST - EN 7 - 2004 and measurements is negligible – in comparison with the costs of the permanent reinforcement – if variable conditions are not to intensive, we were able to reduce effectively the investment value of the object.

  1. MODELLING AND MEASUREMENT OF NOx CONCENTRATION IN PLUME FROM AIRCRAFT ENGINE UNDER OPERATION CONDITIONS AT THE AERODROME AREA

    Directory of Open Access Journals (Sweden)

    Oleksandr Zaporozhets

    2016-06-01

    Full Text Available Purpose: Airport air pollution is growing concern because of the air traffic expansion over the years (at annual rate of 5 %, rising tension of airports and growing cities expansion close each other (for such Ukrainian airports, as Zhulyany, Boryspol, Lviv, Odesa and Zaporizhzhia and accordingly growing public concern with air quality around the airport. Analysis of inventory emission results at major European and Ukrainian airports highlighted, that an aircraft is the dominant source of air pollution in most cases under consideration. For accurate assessment of aircraft emission contribution to total airport pollution and development of successful mitigation strategies, it is necessary to combine the modeling and measurement methods. Methods: Measurement of NOx concentration in the jet/plume from aircraft engine was implemented by chemiluminescence method under real operating conditions (taxi, landing, accelerating on the runway and take-off at International Boryspol airport (IBA. Modeling of NOx concentration was done by complex model PolEmiCa, which takes into account the transport and dilution of air contaminates by exhaust gases jet and the wing trailing vortexes.Results: The results of the measured NOx concentration in plume from aircraft engine for take-off conditions at IBA were used for improvement and validation of the complex model PolEmiCa. The comparison of measured and modeled instantaneous concentration of NOx was sufficiently improved by taking into account the impact of wing trailing vortices on the parameters of the jet (buoyancy height, horizontal and vertical deviation and on concentration distribution in plume. Discussion: Combined approach of modeling and measurement methods provides more accurate representation of aircraft emission contribution to total air pollution in airport area. Modeling side provides scientific grounding for organization of instrumental monitoring of aircraft engine emissions, particularly, scheme

  2. Large-area luminescent solar concentrators based on `Stokes-shift-engineered' nanocrystals in a mass-polymerized PMMA matrix

    Science.gov (United States)

    Meinardi, Francesco; Colombo, Annalisa; Velizhanin, Kirill A.; Simonutti, Roberto; Lorenzon, Monica; Beverina, Luca; Viswanatha, Ranjani; Klimov, Victor I.; Brovelli, Sergio

    2014-05-01

    Luminescent solar concentrators are cost-effective complements to semiconductor photovoltaics that can boost the output of solar cells and allow for the integration of photovoltaic-active architectural elements into buildings (for example, photovoltaic windows). Colloidal quantum dots are attractive for use in luminescent solar concentrators, but their small Stokes shift results in reabsorption losses that hinder the realization of large-area devices. Here, we use `Stokes-shift-engineered' CdSe/CdS quantum dots with giant shells (giant quantum dots) to realize luminescent solar concentrators without reabsorption losses for device dimensions up to tens of centimetres. Monte-Carlo simulations show a 100-fold increase in efficiency using giant quantum dots compared with core-only nanocrystals. We demonstrate the feasibility of this approach by using high-optical-quality quantum dot-polymethylmethacrylate nanocomposites fabricated using a modified industrial method that preserves the light-emitting properties of giant quantum dots upon incorporation into the polymer. Study of these luminescent solar concentrators yields optical efficiencies >10% and an effective concentration factor of 4.4. These results demonstrate the significant promise of Stokes-shift-engineered quantum dots for large-area luminescent solar concentrators.

  3. Integration of educational and scientific-technological areas during the process of education of aerospace engineers

    Science.gov (United States)

    Mayorova, Vera

    2011-09-01

    test-beds for quick and affordable trial-and-test of new technologies and design solutions in aerospace followed by implementation of selected efficiencies in the industry; development and improvement of ground control infrastructure based in the university, which includes the Mission Control Center and the Earth Remote Sensing Center; development of cooperative partnerships with international partners in the field of microsatellite technologies with the goal of sharing experience, uniting efforts in preparing and running scientific and educational experiments and creating next-generation spacecraft by multi-national student groups. Such approaches allow creating seamless environment that unites educational, scientific and innovative processes. This allows students to develop high professionalism, modern engineering thinking and stable engineering skills at an early stage of education at the university.

  4. The perceptions of teachers and principals toward providing additional compensation to teachers in high-need subject areas

    Science.gov (United States)

    Longing, Jeffrey Lucian

    The purpose of this study was to determine possible differences in the perceptions of teachers teaching in high-need areas (i.e., math, science, special education, etc.) and teachers not teaching in high-need areas, (i.e., business education, physical education, etc.) as defined by the states of Arkansas and Louisiana, regarding higher compensation for high-need teachers. In addition, possible perception differences among principals and teachers were determined. The independent variables consisted of gender, position held, years of certified experience, and certification areas. The dependent variable was the perceptions of the participants on providing higher compensation for high-need teachers in order to attract and retain them. The data for all variables were collected using the Teacher Compensation Survey. The sample for this study was limited to teachers, grades 9 through 12, and principals of public high schools in south Arkansas and north Louisiana. Forty-four school districts in south Arkansas (Arkansas Department of Education, 2008a) and north Louisiana (Louisiana Department of Education, 2008a) met the criteria for this study. Twenty-two superintendents gave permission for their districts to participate in the research. A sample of 849 teachers and 38 principals were identified in these districts. Surveys were returned from 350 teachers, creating a 41% response rate. When the 31 principals that returned surveys were added to the total population, the response rate increased to 43% with 381 of the 887 surveyed responding. However, 42 of the teachers and two of the principals skipped some of the questions on the survey and were not included in the study. The researcher used a One-Way ANOVA and independent t-tests to determine the presence of statistical differences at the .05 level. The data showed that most math and science teachers agreed that high-need teachers should be compensated at a higher rate than teachers not teaching in high-need areas. The data

  5. Moderate-to-vigorous physical activity in individuals with psoriasis: associations with body surface area and subjective disease severity.

    Science.gov (United States)

    Wilson, P B

    2013-10-01

    Psoriasis is associated with serious comorbidities such as cardiovascular disease, type 2 diabetes, and metabolic syndrome. These comorbidities are related to low physical activity in the general population. Limited research has evaluated physical activity in psoriasis, and thus, the purpose of this investigation was to compare physical activity between individuals with and without psoriasis as well as explore the associations between measures of psoriasis severity and physical activity. Cross-sectional study using data from the 2003-2006 National Health and Nutrition Examination Survey. Self-reported psoriasis diagnosis and psoriasis severity were regressed on moderate/vigorous physical activity, as measured objectively by accelerometers. Measures of psoriasis severity included rating of psoriasis as a problem in life and body surface area involvement. A total of 4316 individuals had data on psoriasis, moderate/vigorous physical activity, and relevant covariates, with 3.6% (population weighted) of participants (N.=117) reporting a diagnosis of psoriasis. A psoriasis diagnosis was not associated with moderate/vigorous physical activity, and furthermore, body surface area involvement was not associated with moderate/vigorous physical activity among participants with psoriasis. However, every tertile increase in psoriasis as a problem in life was associated with 28% less moderate/vigorous physical activity, which remained significant after adjusting for covariates and removing outliers. While a diagnosis of psoriasis and body surface area involvement do not appear to be associated with less moderate/vigorous physical activity, individuals that rate their psoriasis to be a large problem engage in less moderate/vigorous physical activity.

  6. Using Model Based Systems Engineering and the Systems Modeling Language to Develop Space Mission Area Architectures

    Science.gov (United States)

    2013-09-01

    DoDAF Department of Defense Architecture Framework DSP Defense Support Program FFRDC Federally Funded Research and Development Center GEO...mission area, legacy systems such as the Defense Space Program ( DSP ) and other Intelligence Community sensors each have unique system level...domain-specific languages such as UML for software design and VHDL and three-dimensional geometric modeling for hardware design. SysML is intended to

  7. Intestinal Parasites Coinfection Does Not Alter Plasma Cytokines Profile Elicited in Acute Malaria in Subjects from Endemic Area of Brazil

    Directory of Open Access Journals (Sweden)

    Juan Camilo Sánchez-Arcila

    2014-01-01

    Full Text Available In Brazil, malaria is prevalent in the Amazon region and these regions coincide with high prevalence of intestinal parasites but few studies explore the interaction between malaria and other parasites. Therefore, the present study evaluates changes in cytokine, chemokine, C-reactive protein, and nitric oxide (NO concentrations in 264 individuals, comparing plasma from infected individuals with concurrent malaria and intestinal parasites to individuals with either malaria infection alone and uninfected. In the studied population 24% of the individuals were infected with Plasmodium and 18% coinfected with intestinal parasites. Protozoan parasites comprised the bulk of the intestinal parasites infections and subjects infected with intestinal parasites were more likely to have malaria. The use of principal component analysis and cluster analysis associated increased levels of IL-6, TNF-α, IL-10, and CRP and low levels of IL-17A predominantly with individuals with malaria alone and coinfected individuals. In contrast, low levels of almost all inflammatory mediators were associated predominantly with individuals uninfected while increased levels of IL-17A were associated predominantly with individuals with intestinal parasites only. In conclusion, our data suggest that, in our population, the infection with intestinal parasites (mainly protozoan does not modify the pattern of cytokine production in individuals infected with P. falciparum and P. vivax.

  8. The High Performance and Wide Area Analysis and Mining of Scientific & Engineering Data

    Energy Technology Data Exchange (ETDEWEB)

    Grossman, R.

    2002-12-01

    This final report summarizes our accomplishments and findings and includes recent publications occurring in the final period of this award. One of our research goals was to develop algorithms and services for remote data analysis and distributed data mining which scaled from the commodity internet to high performance networks. When we began the project there was no effective mechanisms to achieve high end to end performance for data intensive applications over wide area, high bandwidth networks. For this reason, we developed algorithms and services for Layers 2,3, and 4 in the simple data web application stack below. We describe our research accomplishments for each of these layers in turn: Layer 4--Data Web Applications; Layer 3--Data Web Services; Layer 2--Network Protocol Services; Layer 1--IP.

  9. Training of Future Civil Engineers in the Area of Foreign Language: Interaction of Educational Paradigms

    Directory of Open Access Journals (Sweden)

    Nordman Irina

    2017-01-01

    Full Text Available The article deals with problems of engineers’ training in higerh school. Problems in the organization of classroom and students’ independent work, in the area of evaluation and control as well as teaching recourses and training methods are pointed out. The role of foreign language in the training of future specialists in the field of construction is highlighted. The necessity of the use of settings of traditional and innovative educational paradigms when training of students in the specialization “Industrial and civil construction” on the discipline “Foreign Language” is proved. The interaction of traditional and innovative teaching resources, trraining methods, as well as evaluation and control means is shown. The conclusions on the effectiveness of interaction of traditional and innovative educational concepts when teaching a foreign language in technical universities are drawn.

  10. Concentration and correlations of perfluoroalkyl substances in whole blood among subjects from three different geographical areas in Korea

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Chon Rae; Lam, Nguyen Hoang [College of Fisheries and Ocean Sciences, Chonnam National University, Yeosu 550-749 (Korea, Republic of); Cho, Byung Mann [Department of Preventive Medicine and Occupational Medicine, School of Medicine, Pusan National University, Yangsan 626-770 (Korea, Republic of); Kannan, Kurunthachalam [Wadsworth Center, New York State Department of Health and Department of Environmental Health Sciences, School of Public Health, State University of New York at Albany, Empire State Plaza PO Box 509, Albany, NY 12201-0509 (United States); Cho, Hyeon Seo, E-mail: hscho@jnu.ac.kr [College of Fisheries and Ocean Sciences, Chonnam National University, Yeosu 550-749 (Korea, Republic of)

    2015-04-15

    blood were found in Korea. • Gender was found to influence the concentrations of PFOA, PFNA, PFHxS and PFOSA. • Significant positive associations between PFAS levels and age of subjects were found. • Occupation was a determinant for PFNA and PFHxS concentrations.

  11. Multi-temporal Land Use Mapping of Coastal Wetlands Area using Machine Learning in Google Earth Engine

    Science.gov (United States)

    Farda, N. M.

    2017-12-01

    Coastal wetlands provide ecosystem services essential to people and the environment. Changes in coastal wetlands, especially on land use, are important to monitor by utilizing multi-temporal imagery. The Google Earth Engine (GEE) provides many machine learning algorithms (10 algorithms) that are very useful for extracting land use from imagery. The research objective is to explore machine learning in Google Earth Engine and its accuracy for multi-temporal land use mapping of coastal wetland area. Landsat 3 MSS (1978), Landsat 5 TM (1991), Landsat 7 ETM+ (2001), and Landsat 8 OLI (2014) images located in Segara Anakan lagoon are selected to represent multi temporal images. The input for machine learning are visible and near infrared bands, PCA band, invers PCA bands, bare soil index, vegetation index, wetness index, elevation from ASTER GDEM, and GLCM (Harralick) texture, and also polygon samples in 140 locations. There are 10 machine learning algorithms applied to extract coastal wetlands land use from Landsat imagery. The algorithms are Fast Naive Bayes, CART (Classification and Regression Tree), Random Forests, GMO Max Entropy, Perceptron (Multi Class Perceptron), Winnow, Voting SVM, Margin SVM, Pegasos (Primal Estimated sub-GrAdient SOlver for Svm), IKPamir (Intersection Kernel Passive Aggressive Method for Information Retrieval, SVM). Machine learning in Google Earth Engine are very helpful in multi-temporal land use mapping, the highest accuracy for land use mapping of coastal wetland is CART with 96.98 % Overall Accuracy using K-Fold Cross Validation (K = 10). GEE is particularly useful for multi-temporal land use mapping with ready used image and classification algorithms, and also very challenging for other applications.

  12. Peer-Assisted Learning Programme: Supporting Students in High-Risk Subjects at the Mechanical Engineering Department at Walter Sisulu University

    Directory of Open Access Journals (Sweden)

    Makala Qonda

    2017-12-01

    Full Text Available The majority of the students who enroll at the Walter Sisulu University (WSU in South Africa are not equipped with the necessary academic/learning skills to cope with the university environment, especially in Mechanical Engineering. The Department of Higher Education and Training (2013, p. 17, further states that “students’ support is crucial to ensure that students adapt to the demands of college life and that they can meet the demands of college programmes”. Particularly in South Africa, the school environment might also contribute to poor student performance as a result of insufficient student support, and a lack of facilities and resources. In order to address this gap, a Peer-Assisted Learning (PAL programme was implemented to provide support targeting high-risk subjects for at-risk students in Mechanical Engineering at WSU. The programme therefore is pro-active and student-driven in that senior students assist junior students with their academic work and learning processes. The programme is designed to encourage collaborative and cooperative learning approaches during group sessions and active student engagement to support student learning (Laal & Laal, 2012. The programme requires substantial resources and time commitments. It is important from an operational, learning, and student perspective to understand in what ways the PAL programme assists students (if at all. Eliciting the experiences of students also helps the department to design interventions from a student-centred perspective using the lens of learning theories.  This qualitative case study explores the student experience of the Peer-Assisted Learning (PAL programme. Open-ended questionnaires/survey from 20 first-year students elicited their perceptions and experiences of the PAL programme. Responses were analysed thematically. Findings indicated that the students had useful insights that may contribute to revising the programme. Aspects mentioned were improved study

  13. Petrography, age, and paleomagnetism of basaltic lava flows in coreholes at Test Area North (TAN), Idaho National Engineering Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Lanphere, M.A.; Champion, D.E. [Geological Survey, Menlo Park, CA (United States). Branch of Isotope Geology; Kuntz, M.A. [Geological Survey, Denver, CO (United States). Branch of Central Regional Geology

    1994-12-31

    The petrography, age, and paleomagnetism were determined on basalt from 21 lava flows comprising about 1,700 feet of core from two coreholes (TAN CH No. 1 and TAN CH No. 2) in the Test Area North (TAN) area of the Idaho National Engineering Laboratory (INEL). Paleomagnetic studies were made on two additional cores from shallow coreholes in the TAN area. K-Ar ages and paleomagnetism also were determined on nearby surface outcrops of Circular Butte. Paleomagnetic measurements were made on 416 samples from four coreholes and on a single site in surface lava flows of Circular Butte. K-Ar ages were measured on 9 basalt samples from TAN CH No. 1 and TAN CH No. 2 and one sample from Circular Butte. K-Ar ages ranged from 1.044 Ma to 2.56 Ma. All of the samples have reversed magnetic polarity and were erupted during the Matuyama Reversed Polarity Epoch. The purpose of investigations was to develop a three-dimensional stratigraphic framework for geologic and hydrologic studies including potential volcanic hazards to facilities at the INEL and movement of radionuclides in the Snake River Plain aquifer.

  14. Free Global Dsm Assessment on Large Scale Areas Exploiting the Potentialities of the Innovative Google Earth Engine Platform

    Science.gov (United States)

    Nascetti, A.; Di Rita, M.; Ravanelli, R.; Amicuzi, M.; Esposito, S.; Crespi, M.

    2017-05-01

    The high-performance cloud-computing platform Google Earth Engine has been developed for global-scale analysis based on the Earth observation data. In particular, in this work, the geometric accuracy of the two most used nearly-global free DSMs (SRTM and ASTER) has been evaluated on the territories of four American States (Colorado, Michigan, Nevada, Utah) and one Italian Region (Trentino Alto- Adige, Northern Italy) exploiting the potentiality of this platform. These are large areas characterized by different terrain morphology, land covers and slopes. The assessment has been performed using two different reference DSMs: the USGS National Elevation Dataset (NED) and a LiDAR acquisition. The DSMs accuracy has been evaluated through computation of standard statistic parameters, both at global scale (considering the whole State/Region) and in function of the terrain morphology using several slope classes. The geometric accuracy in terms of Standard deviation and NMAD, for SRTM range from 2-3 meters in the first slope class to about 45 meters in the last one, whereas for ASTER, the values range from 5-6 to 30 meters. In general, the performed analysis shows a better accuracy for the SRTM in the flat areas whereas the ASTER GDEM is more reliable in the steep areas, where the slopes increase. These preliminary results highlight the GEE potentialities to perform DSM assessment on a global scale.

  15. Automated high throughput whole slide imaging using area sensors, flash light illumination and solid state light engine.

    Science.gov (United States)

    Varga, Viktor Sebestyén; Molnár, Béla; Virág, Tibor

    2012-01-01

    Whole Slide Imagers or digital slide scanners have developed very rapidly in the last 8 years and went through three generations. Third generation instruments have just reached the market which have the stability and throughput to be used for routine clinical work. We describe in this article the technical background and reasoning behind engineering decisions we made during the development of 3DHISTECH's 3rd generation combined brightfield and fluorescent scanner. The Panoramic 250 FLASH utilizes Plan-Apochromat 20x and 40x objectives, a 2 megapixel 3CCD camera for brightfield and a monochrome scientific CMOS camera for fluorescent scanning. A solid state light engine for fluorescent and a strobe light for bright field illumination are used. The system can scan 1cm2 including focusing at 45x resolution in 1 minute. It can scan a well stained DAPI, FITC, TRIC, 1cm2 fluorescent slide in 11 minutes. It can load and scan 250 slides in walk away mode. Using the latest camera technology and electronics, state of the art computer and standard microscope optical components high throughput high quality whole slide imaging is feasible and is sufficient for most of the routine diagnostic work. Extended depth of field and Z-stack scanning is possible with the use of area scan technology.

  16. Cultural Resource Assessment of the Test Area North Demolition Landfill at the Idaho National Engineering and Environmental Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Brenda R. Pace

    2003-07-01

    The proposed new demolition landfill at Test Area North on the Idaho National Engineering and Environmental Laboratory (INEEL) will support ongoing demolition and decontamination within the facilities on the north end of the INEEL. In June of 2003, the INEEL Cultural Resource Management Office conducted archival searches, field surveys, and coordination with the Shoshone-Bannock Tribes to identify all cultural resources that might be adversely affected by the project and to provide recommendations to protect those listed or eligible for listing on the National Register of Historic Places. These investigations showed that landfill construction and operation would affect two significant cultural resources. This report outlines protective measures to ensure that these effects are not adverse.

  17. Successfully Managing the Experimental Area of a Large Physics Experiment from Civil Engineering to the First Beams

    CERN Document Server

    Butin, F

    2010-01-01

    The role of "Experimental Area Manager" supported by a well organized, charismatic and motivated team is absolutely essential for managing the huge effort needed for a multi-cultural, multi-disciplinary installation of cathedral-size underground caverns housing a billion dollar physics experiment. Between the years 2002 and 2008, we supervised and coordinated the ATLAS work site at LHC, from the end of the civil engineering to the first circulating beams, culminating with 240 workers on the site, 24 hours a day, 7 days a week, with activities taking place simultaneously on the surface, in the 60 m shafts and in the 100 m underground experimental cavern. We depict the activities preparation scheme (including tasks ranging from the installation of 280 ton cranes to super-delicate silicon detectors), the work-site organization method, the safety management that was a top priority throughout the whole project, and the opencommunication strategy that required maintaining permanent public visits. The accumulation o...

  18. Evaluation of Some Engineering Properties of Lateritic Soils around Dall Quarry, Sango Area, Ilorin, Nigeria

    Directory of Open Access Journals (Sweden)

    O. A. Omotosho

    2012-06-01

    Full Text Available Lateritic soils at the DALL Quarry in Ilorin metropolis (Sango area, southwestern Nigeria were investigated with respect to their geotechnical properties and their suitability as construction materials. The two samples collected fall within the basement complex and they overly the migmatite-gneiss complex rocks. The grain size analyses show that sample ADET 1 is silt-clayey, very gravelly sand while sample ADET 2 is gravelly, silt-clayey sand. Atterberg consistency limit test shows that the soil samples are above the activity (A line in the zone of intermediate plasticity (CL which means that they are inorganic soils. The samples contain inactive clay (activity 0.95 and 0.63 respectively with little or no swelling tendency and therefore good for construction material and this would prohibit foundation failure during foundation settlement. The California Bearing Ratio (CBR values indicate that they are good as sub-grade construction materials. The cohesion ranges from 60-1 OOKpa (average=75 Kpa and the angle of internal friction ranges from 31°-35° with an average of 33°. The geotechnical analyses results show that the soils can be used as construction materials. Thus, the soil could support shallow foundation, homogeneous embankments, slope stability and sub-grade materials in road constructions.

  19. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II (this volume) describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Specific INEL problem areas/contaminants are identified along with technology solutions, the status of the technologies, precise science and technology needs, and implementation requirements. Volume III provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are referenced by a TEDS codenumber in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II.

  20. Math primer for engineers

    CERN Document Server

    Cryer, CW

    2014-01-01

    Mathematics and engineering are inevitably interrelated, and this interaction will steadily increase as the use of mathematical modelling grows. Although mathematicians and engineers often misunderstand one another, their basic approach is quite similar, as is the historical development of their respective disciplines. The purpose of this Math Primer is to provide a brief introduction to those parts of mathematics which are, or could be, useful in engineering, especially bioengineering. The aim is to summarize the ideas covered in each subject area without going into exhaustive detail. Formula

  1. Effect of toe-spread-out exercise on hallux valgus angle and cross-sectional area of abductor hallucis muscle in subjects with hallux valgus.

    Science.gov (United States)

    Kim, Moon-Hwan; Yi, Chung-Hwi; Weon, Jong-Hyuck; Cynn, Heon-Seock; Jung, Do-Young; Kwon, Oh-Yun

    2015-04-01

    [Purpose] This study investigated whether the toe-spread-out exercise affects the hallux valgus angle, the cross-sectional area of the abductor hallucis muscle, and the hallux valgus angle during active abduction. [Subjects and Methods] Twenty-four subjects with hallux valgus were randomly assigned to orthosis and orthosis plus toe-spread-out exercise groups. The orthosis group wore the orthosis for 8 weeks, while the orthosis plus toe-spread-out group also performed the toe-spread-out exercise. The hallux valgus angle, the cross-sectional area of the abductor hallucis muscle, and the hallux valgus angle during active abduction were measured initially and after 8 weeks by radiography and ultrasonography. [Results] While there were no significant changes in the three parameters in the orthosis group, there were significant differences in the orthosis plus toe-spread-out exercise group after 8 weeks. In addition there were significant differences in the three measures between the two groups. [Conclusion] The toe-spread-out exercise reduces the hallux valgus angle and hallux valgus angle during active abduction, and increases the cross-sectional area of the abductor hallucis muscle. The toe-spread-out exercise is recommended for patients with mild to moderate hallux valgus.

  2. Rehabilitation Engineering: What is Rehabilitation Engineering?

    Science.gov (United States)

    ... Parents/Teachers Resource Links for Students Glossary Rehabilitation Engineering What is rehabilitation engineering? How can future rehabilitation ... the area of rehabilitation engineering? What is rehabilitation engineering? Powered prosthetic leg. Source : M. Goldfarb, Vanderbilt U. ...

  3. An analysis of subject areas and country participation for all health-related projects in the EU's FP5 and FP6 programmes.

    Science.gov (United States)

    Galsworthy, Michael J; Irwin, Rachel; Charlesworth, Kate; Ernst, Kelly; Hristovski, Dimitar; Wismar, Matthias; McKee, Martin

    2014-06-01

    Previous analyses concerning health components of European Union (EU)-funded research have shown low project participation levels of the 12 newest member states (EU-12). Additionally, there has been a lack of subject-area analysis. In the Health Research for Europe project, we screened all projects of the EU's Framework Programmes for research FP5 and FP6 (1998-2006) to identify health research projects and describe participation by country and subject area. FP5 and FP6 project databases were acquired and screened by coders to identify health-related projects, which were then categorized according to the 47 divisions of the EU Health Portal (N = 2728 projects) plus an extra group of 'basic/biotech' projects (N = 1743). Country participation and coordination rates for projects were also analyzed. Approximately 20% of the 26 946 projects (value €29.2bn) were health-related (N = 4756. Value €6.04bn). Within the health categories, the largest expenditures were cancer (11.9%), 'other' (i.e. not mental health or cardiovascular) non-communicable diseases (9.5%) and food safety (9.4%). One hundred thirty-two countries participated in these projects. Of the 27 EU countries (and five partner countries), north-western and Nordic states acquired more projects per capita. The UK led coordination with > 20% of projects. EU-12 countries were generally under-represented for participation and coordination. Combining our findings with the associated literature, we comment on drivers determining distribution of participation and funds across countries and subject areas. Additionally, we discuss changes needed in the core EU projects database to provide greater transparency, data exploitation and return on investment in health research. © The Author 2013. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

  4. Determining the Scope of Collection Development and Research Assistance for Cross-Disciplinary Areas: A Case Study of Two Contrasting Areas, Nanotechnology and Transportation Engineering

    Science.gov (United States)

    Williamson, Jeanine M.; Han, Lee D.; Colon-Aguirre, Monica

    2009-01-01

    The study examined the extent of cross-disciplinarity in nanotechnology and transportation engineering research. Researchers in these two fields were determined from the web sites of the U.S. News and World Report top 100 schools in civil engineering and materials science. Web of Science searches for 2006 and 2007 articles were obtained and the…

  5. Mineralogical correlation of surficial sediment from area drainages with selected sedimentary interbeds at the Idaho National Engineering Laboratory, Idaho

    Energy Technology Data Exchange (ETDEWEB)

    Bartholomay, R.C.

    1990-08-01

    Ongoing research by the US Geological Survey at the INEL involves investigation of the migration of radioactive elements contained in low-level radioactive waste, hydrologic and geologic factors affecting waste movement, and geochemical factors that influence the chemical composition of the waste. Identification of the mineralogy of the Snake River Plain is needed to aid in the study of the hydrology and geochemistry of subsurface waste disposal. The US Geological Surveys project office at the Idaho National Engineering Laboratory, in cooperation with the US Department of Energy, used mineralogical data to correlate surficial sediment samples from the Big Lost River, Little Lost River, and Birch Greek drainages with selected sedimentary interbed core samples taken from test holes at the RWMC (Radioactive Waste Management Complex), TRA (Test Reactors Area), ICPP (Idaho Chemical Processing Plant), and TAN (Test Area North). Correlating the mineralogy of a particular present-day drainage area with a particular sedimentary interbed provides information on historical source of sediment for interbeds in and near the INEL. Mineralogical data indicate that surficial sediment samples from the Big Lost River drainage contained a larger amount of feldspar and pyroxene and a smaller amount of calcite and dolomite than samples from the Little Lost River and Birch Creek drainages. Mineralogical data from sedimentary interbeds at the RWMC, TRA, and ICPP correlate with surficial sediment of the present-day big Lost River drainage. Mineralogical data from a sedimentary interbed at TAN correlate with surficial sediment of the present-day Birch Creek drainage. 13 refs., 5 figs., 3 tabs.

  6. Idaho National Engineering Laboratory Waste Area Groups 1-7 and 10 Technology Logic Diagram. Volume 3

    Energy Technology Data Exchange (ETDEWEB)

    O`Brien, M.C.; Meservey, R.H.; Little, M.; Ferguson, J.S.; Gilmore, M.C.

    1993-09-01

    The Idaho National Engineering Laboratory (INEL) Technology Logic Diagram (TLD) was developed to provide a decision support tool that relates Environmental Restoration (ER) and Waste Management (WM) problems at the INEL to potential technologies that can remediate these problems. The TLD identifies the research, development, demonstration, testing, and evaluation needed to develop these technologies to a state that allows technology transfer and application to an environmental restoration need. It is essential that follow-on engineering and system studies be conducted to build on the output of this project. These studies will begin by selecting the most promising technologies identified in this TLD and finding an optimum mix of technologies that will provide a socially acceptable balance between cost and risk to meet the site windows of opportunity. The TLD consists of three separate volumes: Volume I includes the purpose and scope of the TLD, a brief history of the INEL Waste Area Groups, and environmental problems they represent. A description of the TLD, definitions of terms, a description of the technology evaluation process, and a summary of each subelement, is presented. Volume II describes the overall layout and development of the TLD in logic diagram format. This section addresses the environmental restoration of contaminated INEL sites. Volume III (this volume) provides the Technology Evaluation Data Sheets (TEDS) for Environmental Restoration and Waste Management (EM) activities that are reference by a TEDS code number in Volume II. Each of these sheets represents a single logic trace across the TLD. These sheets contain more detail than provided for technologies in Volume II. Data sheets are arranged alphanumerically by the TEDS code number in the upper right corner of each sheet.

  7. Mapping paddy rice planting area in northeastern Asia with Landsat 8 images, phenology-based algorithm and Google Earth Engine.

    Science.gov (United States)

    Dong, Jinwei; Xiao, Xiangming; Menarguez, Michael A; Zhang, Geli; Qin, Yuanwei; Thau, David; Biradar, Chandrashekhar; Moore, Berrien

    2016-11-01

    Area and spatial distribution information of paddy rice are important for understanding of food security, water use, greenhouse gas emission, and disease transmission. Due to climatic warming and increasing food demand, paddy rice has been expanding rapidly in high latitude areas in the last decade, particularly in northeastern (NE) Asia. Current knowledge about paddy rice fields in these cold regions is limited. The phenology- and pixel-based paddy rice mapping (PPPM) algorithm, which identifies the flooding signals in the rice transplanting phase, has been effectively applied in tropical areas, but has not been tested at large scale of cold regions yet. Despite the effects from more snow/ice, paddy rice mapping in high latitude areas is assumed to be more encouraging due to less clouds, lower cropping intensity, and more observations from Landsat sidelaps. Moreover, the enhanced temporal and geographic coverage from Landsat 8 provides an opportunity to acquire phenology information and map paddy rice. This study evaluated the potential of Landsat 8 images on annual paddy rice mapping in NE Asia which was dominated by single cropping system, including Japan, North Korea, South Korea, and NE China. The cloud computing approach was used to process all the available Landsat 8 imagery in 2014 (143 path/rows, ~3290 scenes) with the Google Earth Engine (GEE) platform. The results indicated that the Landsat 8, GEE, and improved PPPM algorithm can effectively support the yearly mapping of paddy rice in NE Asia. The resultant paddy rice map has a high accuracy with the producer (user) accuracy of 73% (92%), based on the validation using very high resolution images and intensive field photos. Geographic characteristics of paddy rice distribution were analyzed from aspects of country, elevation, latitude, and climate. The resultant 30-m paddy rice map is expected to provide unprecedented details about the area, spatial distribution, and landscape pattern of paddy rice fields

  8. Mapping paddy rice planting area in northeastern Asia with Landsat 8 images, phenology-based algorithm and Google Earth Engine

    Science.gov (United States)

    Dong, Jinwei; Xiao, Xiangming; Menarguez, Michael A.; Zhang, Geli; Qin, Yuanwei; Thau, David; Biradar, Chandrashekhar; Moore, Berrien

    2016-01-01

    Area and spatial distribution information of paddy rice are important for understanding of food security, water use, greenhouse gas emission, and disease transmission. Due to climatic warming and increasing food demand, paddy rice has been expanding rapidly in high latitude areas in the last decade, particularly in northeastern (NE) Asia. Current knowledge about paddy rice fields in these cold regions is limited. The phenology- and pixel-based paddy rice mapping (PPPM) algorithm, which identifies the flooding signals in the rice transplanting phase, has been effectively applied in tropical areas, but has not been tested at large scale of cold regions yet. Despite the effects from more snow/ice, paddy rice mapping in high latitude areas is assumed to be more encouraging due to less clouds, lower cropping intensity, and more observations from Landsat sidelaps. Moreover, the enhanced temporal and geographic coverage from Landsat 8 provides an opportunity to acquire phenology information and map paddy rice. This study evaluated the potential of Landsat 8 images on annual paddy rice mapping in NE Asia which was dominated by single cropping system, including Japan, North Korea, South Korea, and NE China. The cloud computing approach was used to process all the available Landsat 8 imagery in 2014 (143 path/rows, ~3290 scenes) with the Google Earth Engine (GEE) platform. The results indicated that the Landsat 8, GEE, and improved PPPM algorithm can effectively support the yearly mapping of paddy rice in NE Asia. The resultant paddy rice map has a high accuracy with the producer (user) accuracy of 73% (92%), based on the validation using very high resolution images and intensive field photos. Geographic characteristics of paddy rice distribution were analyzed from aspects of country, elevation, latitude, and climate. The resultant 30-m paddy rice map is expected to provide unprecedented details about the area, spatial distribution, and landscape pattern of paddy rice fields

  9. [Nicotine dependence, smoking-related attitude, and subjective norms across the stages of change for smoking cessation among adults smokers in a rural area].

    Science.gov (United States)

    Kim, Young Hee; Seo, Nam Sook; Kang, Hae Young

    2006-10-01

    The purpose of this study was to identify nicotine dependence, smoking-related attitude, and subjective norms across the stages of change for smoking cessation among adult smokers in a rural area. The subjects were 276 current smokers (male=243, female=33). There were 3 stages of change for smoking cessation: pre-contemplation, contemplation, and preparation stage. Data was collected by an interview or self-reporting from February 12th to March 5th 2004, and analyzed with frequency, percentage, chi- square-test, Fisher's exact probability test, ANOVA, and Scheffe test using the SPSS-PC program. According to the stages of change, 114(41.3%) current smokers were in pre-contemplation, 110(39.9%) in contemplation, and 52(18.8%) in the preparation stage. There was a higher percentage of males than females (chi- square=8.99, p=.011) in the preparation stage. The mean score of the smoking-related attitude (F=7.43, p=.001) and subjective norm(F=27.41, p=.001) were both lowest in the pre-contemplation stage and increased positively during the stages of change for smoking cessation. Based on these findings, the authors recommend that community-based smoking cessation programs should be developed by considering the intention or motives of current smokers and should be initiated in the preparation stage and primarily for male groups.

  10. Google Earth Engine, Open-Access Satellite Data, and Machine Learning in Support of Large-Area Probabilistic Wetland Mapping

    Directory of Open Access Journals (Sweden)

    Jennifer N. Hird

    2017-12-01

    Full Text Available Modern advances in cloud computing and machine-leaning algorithms are shifting the manner in which Earth-observation (EO data are used for environmental monitoring, particularly as we settle into the era of free, open-access satellite data streams. Wetland delineation represents a particularly worthy application of this emerging research trend, since wetlands are an ecologically important yet chronically under-represented component of contemporary mapping and monitoring programs, particularly at the regional and national levels. Exploiting Google Earth Engine and R Statistical software, we developed a workflow for predicting the probability of wetland occurrence using a boosted regression tree machine-learning framework applied to digital topographic and EO data. Working in a 13,700 km2 study area in northern Alberta, our best models produced excellent results, with AUC (area under the receiver-operator characteristic curve values of 0.898 and explained-deviance values of 0.708. Our results demonstrate the central role of high-quality topographic variables for modeling wetland distribution at regional scales. Including optical and/or radar variables into the workflow substantially improved model performance, though optical data performed slightly better. Converting our wetland probability-of-occurrence model into a binary Wet-Dry classification yielded an overall accuracy of 85%, which is virtually identical to that derived from the Alberta Merged Wetland Inventory (AMWI: the contemporary inventory used by the Government of Alberta. However, our workflow contains several key advantages over that used to produce the AMWI, and provides a scalable foundation for province-wide monitoring initiatives.

  11. Engineering Encounters: From STEM to STEAM

    Science.gov (United States)

    Cook, Kristin; Bush, Sarah; Cox, Richard

    2017-01-01

    Teaching STEAM (science, technology, engineering, art, and math) in elementary school could be even more promising than teaching STEM. This is due to its ability to cross multiple subject areas and its appeal to multiple types of learners. Intentional integration of the arts in science and engineering lessons has the potential to more deeply…

  12. Iodine distribution in natural waters of different chemical composition in relation to water-bearing soils and rocks and water fractions in areas subjected to radioiodine contamination

    Science.gov (United States)

    Kolmykova, Liudmila; Korobova, Elena

    2017-04-01

    Iodine is an essential microelement required for normal functioning of thyroid gland. Natural deficiency of stable iodine is compensated by its active intake by thyroid and provokes its higher irradiation in case of radiation accidents and contamination of the environment by radioiodine isotopes. The bioavailability of both stable and radioactive iodine and the specificity of its uptake by living organisms largely depends on geochemical parameters of the environment related to natural conditions of water migration. The goal of the study was to investigate spatial distribution of iodine in natural water of different chemical composition in relation to typical water-bearing soils and rocks and water fractions in Bryansk areas subjected to radioiodine contamination after the Chernobyl accident and to evaluate contribution of this factor to the occurrence of endemic thyroid diseases among local population inhabiting geochemically different areas of fluvioglacial and loess-like sedimentary rocks. The highest content of iodine (Me=13.3 µg/l) was observed in surface water of landscapes with H-Ca, Ca and H-Ca-Fe classes of water migration. The lowest microelement level (Me=5.25 µg/l) was noted in groundwater of landscapes with H, H-Fe classes of water migration in areas of Paleogene water bearing rocks. Regardless of the type of source and class of water migration up to 90% of the total content of iodide is present in the fraction membrane filtration). Up to 50% of iodine pass to solution containing particles water in areas of loess-like sedimentary rocks hosts the highest levels of iodine where its associated with calcium mineral aquatic complexes and the suspended particles. The obtained data is believed to be useful in explanation of mobility and intake of iodine and its radioactive analogues by rural population living in different geochemical conditions and using local drinking waters. The data should be accounted of in planning prophylactics of endemic diseases and

  13. Educational role of art history as a school subject area in programmes of formal education in Slovenia: the aspect of vzgoja, according to general European guidelines

    Directory of Open Access Journals (Sweden)

    Marjana Dolšina

    2015-09-01

    Full Text Available Programmes of formal education establish a systematic transfer of knowledge as well as universal values from one generation to another. By that, they ensure the survival of social structures, prevent radical disruptions in their continuity, and serve as basis for general development of a society. Their content and didactic arrangements include interweaving of two basic aspects: the cognitive one and the one related to vzgoja (i.e. upbringing, moral/value education etc.. The latter aims to achieve the ideals of a tolerant, just and lifelong learning society, but seems to be facing increasing challenges, mainly emerging from neoliberal capitalist mentality. Art history as a school subject area in elementary and secondary education may provide an insight beneath the surface of historical events. Thus, it helps develop a critical view towards them and consequently towards the present real-life situations, which contributes to ascending the taxonomic scale of conative educational goals.

  14. Advanced Artificial Science. The development of an artificial science and engineering research infrastructure to facilitate innovative computational modeling, analysis, and application to interdisciplinary areas of scientific investigation.

    Energy Technology Data Exchange (ETDEWEB)

    Saffer, Shelley (Sam) I.

    2014-12-01

    This is a final report of the DOE award DE-SC0001132, Advanced Artificial Science. The development of an artificial science and engineering research infrastructure to facilitate innovative computational modeling, analysis, and application to interdisciplinary areas of scientific investigation. This document describes the achievements of the goals, and resulting research made possible by this award.

  15. Robust coherent superposition of states using quasiadiabatic inverse engineering

    Science.gov (United States)

    Liu, Yen-Huang; Tseng, Shuo-Yen

    2017-10-01

    We use the invariant-based inverse engineering subject to the quasiadiabatic condition to produce robust and high fidelity coherent superposition of quantum states. The inverse engineering provides shortcuts to the desired quantum-state evolution while the quasiadiabaticity provides robustness with respect to errors. We derive simple pulses with low areas which are robust with respect to pulse area and detuning.

  16. [Subjective Workload, Job Satisfaction, and Work-Life-Balance of Physicians and Nurses in a Municipal Hospital in a Rural Area Compared to an Urban University Hospital].

    Science.gov (United States)

    Körber, Michael; Schmid, Klaus; Drexler, Hans; Kiesel, Johannes

    2017-02-15

    Medical and nursing shortages in rural areas represent a current serious public health problem. The healthcare of the rural population is at risk. This study compares perceived workload, job satisfaction and work-life balance of physicians and nurses at a clinic in a rural area with two clinics of a University hospital. Physicians and nurses were interviewed anonymously with a standardized questionnaire (paper and pencil), including questions on job satisfaction, subjective workload and work-life balance. The response rate was almost 50% in the University hospital as well as in the municipal hospital. 32 physicians and 54 nurses from the University hospital and 18 physicians and 137 nurses from the municipal hospital participated in the survey. Nurses at the University hospital assessed the organization of the daily routine with 94.1% as better than those at the municipal hospital (82.4%, p=0.03). Physicians at the University hospital were able to better implement acquired knowledge at a University clinic with 87.5% than their counterparts at the municipal hospital (55.5%, p=0.02). In contrast to their colleagues at the municipal hospital, only 50% of the physicians at the University hospital subjectively considered their workload as just right (83.3% municipal, p=0.02). 96.9% of the physicians at the University hospital were "daily" or "several times a week" under time pressure (municipal 50%, pwork and family life (62.9% University hospital, 72.8% Municipal hospital). In contrast, only 20% of the physicians at the University Hospital but 42.9% of the physicians of the municipal hospital had sufficient opportunities to balance workload and family (p=0.13). The return rate of almost 50% can be described as good. Due to the small number of physicians, especially from the municipal hospital, it can be assumed that some interesting differences could not be detected. There were only slight differences between the nurses from the two hospitals. In contrast, subjective

  17. Implementation of project based learning on the Prakerin subject of vocational high school students of the building engineering to enhance employment skill readiness of graduates in the construction services field

    Science.gov (United States)

    Sugandi, Machmud

    2017-09-01

    Implementation of the Prakerin subject in the field of Building Engineering study program in vocational high school (VHS) are facing many issues associated to non-compliance unit of work in the industry and the expected competencies in learning at school. Project Based Learning (PBL) is an appropriate model learning used for Prakerin subject to increase student competence as the extension of the Prakerin implementation in the construction industry services. Assignments based on the selected project during their practical industry work were given to be completed by student. VHS students in particular field of Building Engineering study program who has been completed Prakerin subject will have a better job readiness, and therefore they will have an understanding on the knowledge, skills, and attitudes and good vision on the construction project in accordance with their experience during Prakerin work in the industry.

  18. Innovations in Biomedical Engineering 2016

    CERN Document Server

    Tkacz, Ewaryst; Paszenda, Zbigniew; Piętka, Ewa

    2017-01-01

    This book presents the proceedings of the “Innovations in Biomedical Engineering IBE’2016” Conference held on October 16–18, 2016 in Poland, discussing recent research on innovations in biomedical engineering. The past decade has seen the dynamic development of more and more sophisticated technologies, including biotechnologies, and more general technologies applied in the area of life sciences. As such the book covers the broadest possible spectrum of subjects related to biomedical engineering innovations. Divided into four parts, it presents state-of-the-art achievements in: • engineering of biomaterials, • modelling and simulations in biomechanics, • informatics in medicine • signal analysis The book helps bridge the gap between technological and methodological engineering achievements on the one hand and clinical requirements in the three major areas diagnosis, therapy and rehabilitation on the other.

  19. Should engineering ethics be taught?

    Science.gov (United States)

    Abaté, Charles J

    2011-09-01

    Should engineering ethics be taught? Despite the obvious truism that we all want our students to be moral engineers who practice virtuous professional behavior, I argue, in this article that the question itself obscures several ambiguities that prompt preliminary resolution. Upon clarification of these ambiguities, and an attempt to delineate key issues that make the question a philosophically interesting one, I conclude that engineering ethics not only should not, but cannot, be taught if we understand "teaching engineering ethics" to mean training engineers to be moral individuals (as some advocates seem to have proposed). However, I also conclude that there is a justification to teaching engineering ethics, insofar as we are able to clearly identify the most desirable and efficacious pedagogical approach to the subject area, which I propose to be a case study-based format that utilizes the principle of human cognitive pattern recognition.

  20. Chemical composition of drinking water as a possible environment-specific factor modifying the thyroid risk in the areas subjected to radioiodine contamination

    Science.gov (United States)

    Kolmykova, Lyudmila; Korobova, Elena; Ryzhenko, Boris

    2015-04-01

    Water is one of the main natural agents providing chemical elements' migration in the environment and food chains. In our opinion a study of spatial variation of the essential trace elements in local drinking water is worth considering as the factor that may contribute to variation of the health risk in areas contaminated by radionuclides and radioiodine in particular. Radioiodine was proved to increase the risk of thyroid cancer among children who lived in areas contaminated during the Chernobyl accident. It was also shown that low stable iodine status of the contaminated area and population also contributed to the risk of this disease in case of radionuclide contamination. The goal of the study was to investigate chemical composition of the drinking water in rural settlements of the Bryansk oblast' subjected to radioiodine contamination and to evaluate speciation of stable I and Se on the basis of their total concentration and chemical composition of the real water samples with the help of thermodynamic modelling. Water samples were collected from different aquifers discharging at different depths (dug wells, local private bore holes and water pipes) in rural settlements located in areas with contrasting soil iodine status. Thermodynamic modelling was performed using original software (HCh code of Y.Shvarov, Moscow State University, RUSSIA) incorporating the measured pH, Corg and elements' concentration values. Performed modelling showed possibility of formation of complex CaI+ ion in aqueous phase, I sorption by goethite and transfer of Se to solid phase as FeSe in the observed pH-Eh conditions. It helped to identify environmental conditions providing high I and Se mobility and their depletion from natural waters. Both the experimental data and modeling showed that I and Se migration and deficiency in natural water is closely connected to pH, Eh conditions and the concentration of typomorphic chemical elements (Ca, Mg, Fe) defining the class of water migration

  1. The use of area-oriented work breakdown structures in developments of EPC of process unit; Emprego de estruturas analiticas de projeto orientadas por area fisica em empreendimentos EPC (Engineering, Procurement and Construction) de unidade de processo

    Energy Technology Data Exchange (ETDEWEB)

    Salloum, Joao; Balbi, Diego J.G. [Promon Engenharia Ltda., Rio de Janeiro, RJ (Brazil)

    2012-07-01

    The use of area-oriented work breakdown structures has been proven as a very useful tool for supporting the 'scope detailing' processes in construction projects. This practice allows the definition of intermediate work packages, assisting in the distribution of the scope to be executed within the different team members (or subcontractors), and also allowing the definition of a basic construction strategy based on the main project constraints reflected in each physical area (delivery lead-time of long lead items, for example), to be used as a guide for developing a preliminary master schedule for engineering e procurement activities with a better alignment with the construction strategy. In this way the detailed engineering activities can be developed based on this structure allowing, for example, the possibility of issue piping isometrics and plants under this structure. It's common to split the scope according to the physical location on the eve of starting the field activities as a way to identify the workfaces at the time of the development of 'execution plans' for field activities. However, since this stage much of the engineering activities are already in progress, or even completed, the likelihood of conflicting strategies, such as choosing to start the installation of piping in areas that do not have availability of design documents or required material is considerably higher. Therefore, this study has the intention to discuss about the use of this practice in the early stages of the detailed engineering phase and show the practical impacts of the application of this concept, showing the results obtained with this strategy in oil refining process plant EPC project carried out by Promon Engineering. (author)

  2. Information engineering

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, D.N.

    1997-02-01

    The Information Engineering thrust area develops information technology to support the programmatic needs of Lawrence Livermore National Laboratory`s Engineering Directorate. Progress in five programmatic areas are described in separate reports contained herein. These are entitled Three-dimensional Object Creation, Manipulation, and Transport, Zephyr:A Secure Internet-Based Process to Streamline Engineering Procurements, Subcarrier Multiplexing: Optical Network Demonstrations, Parallel Optical Interconnect Technology Demonstration, and Intelligent Automation Architecture.

  3. Scenario-Based Seismic Risk Analysis: An Engineering Approach to the Development of Source and Site-Specific Ground Motion Time Histories in Areas of Low Seismicity

    Science.gov (United States)

    Klügel, Jens-Uwe; Attinger, Richard

    2011-01-01

    Modern engineering design methods require ground motion time histories as input for non-linear dynamic structural analysis. Non-linear dynamic methods of analysis are increasingly applied in the context of probabilistic risk assessments and for cost-effective design of critical infrastructures. In current engineering practice artificial time histories matching deterministic design spectra or probabilistic uniform hazard spectra are most frequently used for engineering analysis. The intermediate step of generation of response spectra can lead to a biased estimate of the potential damage from earthquakes because of insufficient consideration of the true energy content and strong motion duration of earthquakes. Thus, assessment of seismic risk may seem unrealistic. An engineering approach to the development of three-component ground motion time histories has been established which enables consideration of the typical characteristics of seismic sources, regional ground motion attenuation, and the main geotechnical characteristics of the target site. Therefore, the approach is suitable for use in scenario-based risk analysis a larger number of time histories are required for representation of the seismic hazard. Near-field effects are implemented in the stochastic source model using engineering approximations. The approach is suggested for use in areas of low seismicity where ground motion records of larger earthquakes are not available. Uncertainty analysis indicates that ground motions generated by individual earthquakes are well constrained and that the usual lognormal model is not the best choice for predicting the upper tail of the distribution of the ground motions.

  4. Integrating Ecosystem Engineering and Food Web Ecology: Testing the Effect of Biogenic Reefs on the Food Web of a Soft-Bottom Intertidal Area.

    Science.gov (United States)

    De Smet, Bart; Fournier, Jérôme; De Troch, Marleen; Vincx, Magda; Vanaverbeke, Jan

    2015-01-01

    The potential of ecosystem engineers to modify the structure and dynamics of food webs has recently been hypothesised from a conceptual point of view. Empirical data on the integration of ecosystem engineers and food webs is however largely lacking. This paper investigates the hypothesised link based on a field sampling approach of intertidal biogenic aggregations created by the ecosystem engineer Lanice conchilega (Polychaeta, Terebellidae). The aggregations are known to have a considerable impact on the physical and biogeochemical characteristics of their environment and subsequently on the abundance and biomass of primary food sources and the macrofaunal (i.e. the macro-, hyper- and epibenthos) community. Therefore, we hypothesise that L. conchilega aggregations affect the structure, stability and isotopic niche of the consumer assemblage of a soft-bottom intertidal food web. Primary food sources and the bentho-pelagic consumer assemblage of a L. conchilega aggregation and a control area were sampled on two soft-bottom intertidal areas along the French coast and analysed for their stable isotopes. Despite the structural impacts of the ecosystem engineer on the associated macrofaunal community, the presence of L. conchilega aggregations only has a minor effect on the food web structure of soft-bottom intertidal areas. The isotopic niche width of the consumer communities of the L. conchilega aggregations and control areas are highly similar, implying that consumer taxa do not shift their diet when feeding in a L. conchilega aggregation. Besides, species packing and hence trophic redundancy were not affected, pointing to an unaltered stability of the food web in the presence of L. conchilega.

  5. Integrating Ecosystem Engineering and Food Web Ecology: Testing the Effect of Biogenic Reefs on the Food Web of a Soft-Bottom Intertidal Area.

    Directory of Open Access Journals (Sweden)

    Bart De Smet

    Full Text Available The potential of ecosystem engineers to modify the structure and dynamics of food webs has recently been hypothesised from a conceptual point of view. Empirical data on the integration of ecosystem engineers and food webs is however largely lacking. This paper investigates the hypothesised link based on a field sampling approach of intertidal biogenic aggregations created by the ecosystem engineer Lanice conchilega (Polychaeta, Terebellidae. The aggregations are known to have a considerable impact on the physical and biogeochemical characteristics of their environment and subsequently on the abundance and biomass of primary food sources and the macrofaunal (i.e. the macro-, hyper- and epibenthos community. Therefore, we hypothesise that L. conchilega aggregations affect the structure, stability and isotopic niche of the consumer assemblage of a soft-bottom intertidal food web. Primary food sources and the bentho-pelagic consumer assemblage of a L. conchilega aggregation and a control area were sampled on two soft-bottom intertidal areas along the French coast and analysed for their stable isotopes. Despite the structural impacts of the ecosystem engineer on the associated macrofaunal community, the presence of L. conchilega aggregations only has a minor effect on the food web structure of soft-bottom intertidal areas. The isotopic niche width of the consumer communities of the L. conchilega aggregations and control areas are highly similar, implying that consumer taxa do not shift their diet when feeding in a L. conchilega aggregation. Besides, species packing and hence trophic redundancy were not affected, pointing to an unaltered stability of the food web in the presence of L. conchilega.

  6. Increasing mortality from ischaemic heart disease in China from 2004 to 2010: disproportionate rise in rural areas and elderly subjects. 438 million person-years follow-up.

    Science.gov (United States)

    Zhang, Xiaofei; Khan, Arshad A; Haq, Ehtesham Ul; Rahim, Aadil; Hu, Dayi; Attia, John; Oldmeadow, Christopher; Ma, Xiaoyan; Ding, Rongjing; Boyle, Andrew J

    2017-01-01

    We sought to ascertain the changes in mortality from ischaemic heart disease (IHD) from 2004 to 2010 in China as the sheer size of China's population makes disease patterns relevant globally. Data on IHD mortality were obtained from the Chinese Centre for Disease Control and Prevention National Disease Surveillance Point System, which includes 161 counties and a population of over 73 million-a representative sample of over 6% of the entire population of China. Both crude and World Health Organization (WHO)-standardized IHD mortality increased, in both men and women and in both urban and rural locations, during the study period, demonstrating the effect of urbanization, economic growth, and epidemiological transition on cardiovascular health. WHO-standardized IHD mortality increased for rural males by 9.2% per year (95% CI: 6.7-11.7%; P < 0.0001), and the trend was statistically significantly higher (P = 0.0001) than in urban males by 6.4% per year (95% CI: 3-10%; P = 0.02). WHO-standardized IHD mortality rate increased for rural females by 7.0% per year (95% CI: 4.6-9.4%; P < 0.0001); this was statistically significantly higher than urban females by 4.3% per year (95% CI: 1-8%; P = 0.02). The age group over 80 years showed the greatest increase in IHD mortality. Mortality from IHD is increasing in China, in contrast to decreasing in other countries. This is largely driven by increasing IHD mortality in rural areas and subjects over 80 years old. This needs urgent attention by public health workers and policymakers.

  7. Peer-Assisted Learning Programme: Supporting Students in High-Risk Subjects at the Mechanical Engineering Department at Walter Sisulu University

    Science.gov (United States)

    Makola, Qonda

    2017-01-01

    The majority of the students who enroll at the Walter Sisulu University (WSU) in South Africa are not equipped with the necessary academic/learning skills to cope with the university environment, especially in Mechanical Engineering. The Department of Higher Education and Training (2013, p. 17), further states that "students' support is…

  8. Feasibility of a Dual-Fuel Engine Fuelled with Waste Vegetable Oil and Municipal Organic Fraction for Power Generation in Urban Areas

    Directory of Open Access Journals (Sweden)

    L. De Simio

    2012-01-01

    Full Text Available Biomass, in form of residues and waste, can be used to produce energy with low environmental impact. It is important to use the feedstock close to the places where waste are available, and with the shortest conversion pathway, to maximize the process efficiency. In particular waste vegetable oil and the organic fraction of municipal solid waste represent a good source for fuel production in urban areas. Dual fuel engines could be taken into consideration for an efficient management of these wastes. In fact, the dual fuel technology can achieve overall efficiencies typical of diesel engines with a cleaner exhaust emission. In this paper the feasibility of a cogeneration system fuelled with waste vegetable oil and biogas is discussed and the evaluation of performance and emissions is reported on the base of experimental activities on dual fuel heavy duty engine in comparison with diesel and spark ignition engines. The ratio of biogas potential from MSW and biodiesel potential from waste vegetable oil was estimated and it results suitable for dual fuel fuelling. An electric power installation of 70 kW every 10,000 people could be achieved.

  9. Fabrication of novel high surface area mushroom gilled fibers and their effects on human adipose derived stem cells under pulsatile fluid flow for tissue engineering applications.

    Science.gov (United States)

    Tuin, Stephen A; Pourdeyhimi, Behnam; Loboa, Elizabeth G

    2016-05-01

    The fabrication and characterization of novel high surface area hollow gilled fiber tissue engineering scaffolds via industrially relevant, scalable, repeatable, high speed, and economical nonwoven carding technology is described. Scaffolds were validated as tissue engineering scaffolds using human adipose derived stem cells (hASC) exposed to pulsatile fluid flow (PFF). The effects of fiber morphology on the proliferation and viability of hASC, as well as effects of varied magnitudes of shear stress applied via PFF on the expression of the early osteogenic gene marker runt related transcription factor 2 (RUNX2) were evaluated. Gilled fiber scaffolds led to a significant increase in proliferation of hASC after seven days in static culture, and exhibited fewer dead cells compared to pure PLA round fiber controls. Further, hASC-seeded scaffolds exposed to 3 and 6dyn/cm(2) resulted in significantly increased mRNA expression of RUNX2 after one hour of PFF in the absence of soluble osteogenic induction factors. This is the first study to describe a method for the fabrication of high surface area gilled fibers and scaffolds. The scalable manufacturing process and potential fabrication across multiple nonwoven and woven platforms makes them promising candidates for a variety of applications that require high surface area fibrous materials. We report here for the first time the successful fabrication of novel high surface area gilled fiber scaffolds for tissue engineering applications. Gilled fibers led to a significant increase in proliferation of human adipose derived stem cells after one week in culture, and a greater number of viable cells compared to round fiber controls. Further, in the absence of osteogenic induction factors, gilled fibers led to significantly increased mRNA expression of an early marker for osteogenesis after exposure to pulsatile fluid flow. This is the first study to describe gilled fiber fabrication and their potential for tissue engineering

  10. Authorized Limits for the Release of a 25 Ton Locomotive, Serial Number 21547, at the Area 25 Engine Maintenance, Assembly, and Disassembly Facility, Nevada Test Site, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    Jeremy Gwin and Douglas Frenette

    2010-04-08

    This document contains process knowledge and radiological data and analysis to support approval for release of the 25-ton locomotive, Serial Number 21547, at the Area 25 Engine Maintenance, Assembly, and Disassembly (EMAD) Facility, located on the Nevada Test Site (NTS). The 25-ton locomotive is a small, one-of-a-kind locomotive used to move railcars in support of the Nuclear Engine for Rocket Vehicle Application project. This locomotive was identified as having significant historical value by the Nevada State Railroad Museum in Boulder City, Nevada, where it will be used as a display piece. A substantial effort to characterize the radiological conditions of the locomotive was undertaken by the NTS Management and Operations Contractor, National Security Technologies, LLC (NSTec). During this characterization process, seven small areas on the locomotive had contamination levels that exceeded the NTS release criteria (limits consistent with U.S. Department of Energy [DOE] Order DOE O 5400.5, “Radiation Protection of the Public and the Environment”). The decision was made to perform radiological decontamination of these known accessible impacted areas to further the release process. On February 9, 2010, NSTec personnel completed decontamination of these seven areas to within the NTS release criteria. Although all accessible areas of the locomotive had been successfully decontaminated to within NTS release criteria, it was plausible that inaccessible areas of the locomotive (i.e., those areas on the locomotive where it was not possible to perform radiological surveys) could potentially have contamination above unrestricted release limits. To access the majority of these inaccessible areas, the locomotive would have to be disassembled. A complete disassembly for a full radiological survey could have permanently destroyed parts and would have ruined the historical value of the locomotive. Complete disassembly would also add an unreasonable financial burden for the

  11. A probabilistic approach to the dynamic analysis of ducts subjected to multibase harmonic and random excitation. [for Space Shuttle Main Engine

    Science.gov (United States)

    Debchaudhury, Amit; Rajagopal, K. R.; Ho, H.; Newell, J. F.

    1990-01-01

    The dynamic behavior of the discharge duct of the high-pressure oxidizer turbopump of a cryogenic rocket motor is investigated analytically. The probabilistic analysis program NESSUS (Numerical Evaluation of Stochastic Structures Under Stress; Cruse et al., 1988) is used to treat the uncertainties due to random and harmonic excitation (e.g., pump noise, pump-induced harmonics, and combustion noise), variations in engine inlet pressure, and changes in system damping. The load modeling procedure, the variation in power-spectral density in different zones of the engine structure, and the dynamic structural-analysis technique are described, and the numerical results of the NESSUS analysis are presented in extensive tables and graphs and discussed in detail.

  12. Numerical and Experimental Study on Manufacture of a Novel High-Capacity Engine Oil Pan Subjected to Hydro-Mechanical Deep Drawing

    Science.gov (United States)

    Chen, D. Y.; Xu, Y.; Zhang, S. H.; El-Aty, A. Abd; Ma, Y.

    2017-09-01

    The oil pan is equipped at the bottom of engine crankcase of the automobile to prevent impurity and collect the lubrication oil from the surfaces of the engine which is helpful for heat dissipation and oxidation prevention. The present study aims at manufacturing a novel high-capacity engine oil pan, which is considered as a complex shaped component with features of thin wall, large size and asymmetric deep cavity through both numerical and experimental methods. The result indicated that it is difficult to form the current part through the common deep drawing process. Accordingly, the hydro-mechanical deep drawing technology was conducted, which consisted of two steps, previous local drawing and the final integral deep drawing with hydraulic pressure. The finite element analysis (FEA) was carried out to investigate the influence of initial blank dimension and the key process parameters such as loading path, draw-bead force and fillet radius on the formability of the sheet blank. Compared with the common deep drawing, the limit drawing ratio by hydro-mechanical deep drawing can be increased from 2.34 to 2.77, while the reduction in blank wall thickness can be controlled in the range of 28%. The formability is greatly improved without any defects such as crack and wrinkle by means of parameters optimisation. The results gained from simulation keep a reasonable agreement with that obtained from experiment trials.

  13. Savannah River Plant engineering and design history. Volume 4: 300/700 Areas & general services and facilities

    Energy Technology Data Exchange (ETDEWEB)

    1957-01-01

    The primary function of the 300 Area is the production and preparation of the fuel and target elements required for the 100 Area production reactors. Uranium slugs and lithium-aluminium alloy control and blanket rods are prepared in separate structures. Other facilities include a test pile, a physics assembly laboratory, an office and change house, an electrical substation, and various service facilities such as rail lines, roads, sewers, steam and water distribution lines, etc. The 700 Area contains housing and facilities for plant management, general plant services, and certain technical activities. The technical buildings include the Main Technical Laboratory, the Waste Concentration Building, the Health Physics Headquarters, and the Health Physics Calibration building. Sections of this report describe the following: development of the 300-M Area; selection and description of process; design of main facilities of the 300 Area; development of the 700-A Area; design of the main facilities of the 700 Area; and general services and facilities, including transportation, plant protection, waste disposal and drainage, site work, pilot plants, storage, and furniture and fixtures.

  14. A Program for Cultivating Nuclear Talent at Engineering Educational Institute in a Remote Area from Nuclear Power Plants

    Science.gov (United States)

    Takahashi, Tsuyoshi

    Recently, in Japan, the number of students who hope for finding employment at the nuclear power company has decreased as students‧ concern for the nuclear power industry decreases. To improve the situation, Ministry of Education, Culture, Sports, Science and Technology launched the program of cultivating talent for nuclear power which supports research and education of nuclear power in the academic year of 2007. Supported by the program, Kushiro College of Technology conducted several activities concerning nuclear power for about a year. The students came to be interested in nuclear engineering through these activities and its results.

  15. Using Computer Technology Tools to Improve the\\ud Teaching-Learning Process in Technical and Vocational Education: Mechanical Engineering Subject Area

    OpenAIRE

    Abdulrasool, Salah Mahdi; Mishra, Rakesh

    2009-01-01

    This paper discusses the integration of computer assisted instructions (CAI) with traditional class room teaching. It describes a teaching method to bring real-world of industrial work into the classroom that underscores the need to learn fundamental principles while adding excitement and relevance to the experience. This paper presents results of a case study undertaken to understand the effect of computer assisted teaching methodology on learning effectiveness in classroom environment. The ...

  16. Experience Gained during the Adaptation of Classical ChE Subjects to the Bologna Plan in Europe: The Case of Chemical Reactors

    Science.gov (United States)

    Ponsa, Sergio; Sanchez, Antoni

    2011-01-01

    At present, due to the overall adaptation to the European Higher Education Area (EHEA), a new concept regarding the teaching methodology was thought to be essential for engineering subjects. In this paper we describe our experience teaching the altered content of the courses on two classical subjects; Chemical Reactors (Chemical Engineering) and…

  17. Prospects for using peat and products of its processing in municipal power engineering in rural and remote areas

    Science.gov (United States)

    Medvedeva, E. A.; Zhenikhov, Yu. N.; Urvantsev, I. V.; Tsyba, V. E.

    2017-06-01

    This article presents a detailed analysis of the economic efficiency of peat utilization for generating electricity and heat in Russian rural areas and decentralized power consumption areas on the basis of the comparison of power tariffs (prices) and full costs of peat-based electricity and heat production. The research was performed using the model-information complex detailed with respect to municipal areas and major peat deposits that was developed at the Energy Institute, National Research University Higher School of Economics. It is shown that the firing of lignin helium fuel (LHF) granules that are made from peat extracted by the excavating method according to the new, patented technology is considered most efficient. In nongasified areas, the total cost of heat power that is generated in new boiler houses on the basis of LHF granules is often lower than the total heat cost for the gasification of the area and construction of gas boiler houses. In some cases, the heat cost in gasified areas is lower when using a boiler house based on LHF granules than that provided by the conversion of a boiler house to gas fuel. It is also shown that the construction of peat-based heat sources with the overall power of up to 27600 GJ/h that generate a heat power of up to 167.5 million GJ/year will be economically efficient in the coming years, provided that the tariffs for energy sources remain the same. Taking into account the supportive measures that were accepted on a legislative basis in July 2016, sources with the total power of up to 70 GW may be effective for peat-based plants with combined heat-andpower generation. To stimulate the utilization of peat in decentralized power consumption areas and rural areas located in the vicinity of deposits of this fuel type, it is also suggested to make amendments in the normative legal base.

  18. Biosystems engineering

    OpenAIRE

    P. Ulger; E. Gonulol

    2015-01-01

    Higher agricultural education system has been getting multidiscipline as a result of the level oftechnology, recently. Biosystems Engineering has become popular in developed countries particularly afterelectronic and information technologies has been getting to be a part of agriculture and accompanied ofbiology. In this study definition of Biosystems Engineering discipline, working areas, research, publicationand job opportunities were discussed meticulously. Academic organization of Biosyste...

  19. (Im) Perfect robustness and adaptation of metabolic networks subject to metabolic and gene-expression regulation: marrying control engineering with metabolic control analysis

    NARCIS (Netherlands)

    He, F.; Fromion, V.; Westerhoff, H.V.

    2013-01-01

    Background: Metabolic control analysis (MCA) and supply-demand theory have led to appreciable understanding of the systems properties of metabolic networks that are subject exclusively to metabolic regulation. Supply-demand theory has not yet considered gene-expression regulation explicitly whilst a

  20. A Structural Equation Model Analyzing the Relationship of Student Achievement Motivations and Personality Factors in a Range of Academic Subject-Matter Areas

    Science.gov (United States)

    Tempelaar, Dirk T.; Gijselaers, Wim H.; Schim van der Loeff, Sybrand; Nijhuis, Jan F. H.

    2007-01-01

    The question of subject-specificity of achievement motivations is important, both for educational psychology, as well as for educational policy. This study contributes to the investigation of the heterogeneity in achievement motivations in the context of the expectancy-value model. Whereas existing research deals with middle and high school…

  1. Masticatory and cervical muscle tenderness and pain sensitivity in a remote area in subjects with a temporomandibular disorder and neck disability.

    Science.gov (United States)

    Silveira, Anelise; Armijo-Olivo, Susan; Gadotti, Inae C; Magee, David

    2014-01-01

    To compare the masticatory and cervical muscle tenderness and pain sensitivity in the hand (remote region) between patients with temporomandibular disorders (TMD) and healthy controls. Twenty female subjects were diagnosed with chronic TMD, and 20 were considered healthy. Subjects completed the Neck Disability Index and Limitations of Daily Functions in a TMD questionnaire. Tenderness of the masticatory and cervical muscles and pain sensitivity in the hand were measured using an algometer. Three-way mixed analysis of variance (ANOVA) evaluated differences in muscle tenderness between groups. One-way ANOVA compared pain sensitivity in the hand between groups. Effect sizes were assessed using Cohen guidelines. Significantly increased masticatory and cervical muscle tenderness and pain sensitivity in the hand were found in subjects with TMD when compared with healthy subjects. Moderate to high effect sizes showed the clinical relevance of the findings. The results of this study have highlighted the importance of assessing TMD patients not only in the craniofacial region but also in the neck and other parts of the body. Future studies should focus on testing the effectiveness of treatments addressing the neck and the pain sensitivity in the hand in patients with TMD.

  2. Groundwater Engineering in an Environmentally Sensitive Urban Area: Assessment, Landuse Change/Infrastructure Impacts and Mitigation Measures

    Directory of Open Access Journals (Sweden)

    Yohannes Yihdego

    2017-07-01

    Full Text Available A rise in the shallow unconfined groundwater at a site in Australia is causing water logging of the underground facility in the affected area. Realizing this problem, a study was conducted to identify the source of water that is causing the rise and to develop an implementation and operation plan of the mitigation (dewatering system. Modelling was undertaken using MODFLOW-SURFACT code, within the framework of Visual MODFLOW, to assess the spatial and temporal groundwater level at the site. The study undertaken incorporates compilation and assessment of available data, including a list of factual information reviewed, development of a conceptual groundwater model for the site and modelling of the pre and post development conditions. The outcomes of the assessment indicate water level rises due to the construction of the embankment are likely less than 0.12 m and changes in land, such as affected area burial, may change aquifer characteristics more significantly than the embankment. It is concluded that the elevated groundwater levels in the affected area are most likely a result of above average rainfall since 2007 and long term cumulative land use changes. The embankment construction is just one of many land use changes that have occurred both within and surrounding the affected area and likely only a minor contributor to the elevated water levels. Greater contribution may be attributed to re-direction of the natural flow paths the railway culvert weir reducing the overland flow gradient and ongoing changes (burial within the affected area and including the embankment. The model findings gives answers on what factors may be/are causing/contributing to, the higher than usual groundwater levels in the study area. A combination of drainage and/or pumping (dewatering system is suggested as a solution to overcome the problem of rising groundwater levels at the site. Further, the model output can aid in assessing mitigation options, including

  3. Fiscal 1993 study of engineering for making areas prosperous using natural energy; 1993 nendo kankyo chowagata green techno system no kokusai kyoryoku model ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    The paper studied the engineering for activating areas using natural energy. A system has started in which electric power companies purchase surplus electric power from the natural energy use power generation such as the wind power and photovoltaic power generation, etc., and a lot of local self-governing bodies in the country plan `projects to promote town` using the system. However, few engineers and makers can plan `a project to promote town,` making effective use of natural energy which is fickle. Therefore, first, the paper arranged the actual status mostly of the cases of `the projects` using natural energy which have been carried out in the country. Next, the trend of the natural energy utilization technology in countries including the U.S. was described. Moreover, assuming model areas in Japan for working out a concept of model projects on the natural energy utilization and town promotion, a concept was proposed making full use of the utilization technology which has now usability. Arrangement is being made for conditions for the full scale spread as seen in the subsidy system for general users. 3 refs., 176 figs., 61 tabs.

  4. Systems Engineering

    OpenAIRE

    Vaughan, William W.

    2016-01-01

    The term “systems engineering” when entered into the Google search page, produces a significant number of results, evidence that systems engineering is recognized as being important for the success of essentially all products. Since most readers of this item will be rather well versed in documents concerning systems engineering, I have elected to share some of the points made on this subject in a document developed by the European Cooperation for Space Standardization (ECSS), a component of t...

  5. Researching primary engineering education: UK perspectives, an exploratory study

    Science.gov (United States)

    Clark, Robin; Andrews, Jane

    2010-10-01

    This paper draws attention to the findings of an exploratory study that critically identified and analysed relevant perceptions of elementary level engineering education within the UK. Utilising an approach based upon grounded theory methodology, 30 participants including teachers, representatives of government bodies and non-profit providers of primary level engineering initiatives were interviewed. Three main concepts were identified during the analysis of findings, each relevant to primary engineering education. These were pedagogic issues, exposure to engineering within the curriculum and children's interest. The paper concludes that the opportunity to make a real difference to children's education by stimulating their engineering imagination suggests this subject area is of particular value.

  6. Transferring the exudate in the tissue engineering chamber as a trigger to incubate large amount adipose tissue in remote area.

    Science.gov (United States)

    Lei, Chen; Dong, Ziqing; Wan, Jinlin; Xiao, Xiaolian; Lu, Feng; Wang, Biao

    2017-10-03

    Tissue engineering chamber (TEC) is a technique that could incubate up to 16 folds volume increase of a fat flap. But the mechanism in the silicone chamber was still unknown. The function of exudate in the chamber was noticed recently. We developed a special model called fluid drainage model (FDM) that consisted of a traditional TEC on the back and paired fat flaps without a chamber in the groins. Then we used a silicon tube to dynamically transfer the exudate from dorsal TEC to one of the paired inguinal fat flap while the other inguinal fat flap with a sham tube was set as control. At week 4, the volume of drainage group reached 8.7 ± 2.3 ml, 576±152% to its original volume while the growth ratio of control group was only 130±39%. Similar volume change and histological change were observed within fat flap from TEC model and drainage group. The exudate in the TEC is a heterogeneous cocktail contains cytokines as well as cells. Intriguingly, transferred exudate in the TEC model sustain the ability to incubate large amount of adipose tissue remotely. This article is protected by copyright. All rights reserved.

  7. A Comparative Study on Physical Vulnerability of Urban Area against Natural Hazards: Importance of Health Promoting Approach in Civil Engineering.

    Science.gov (United States)

    Ahadnezhad Reveshty, Mohsen; Kamelifar, Mohammad Javad; Ranjbarnia, Behzad; Pashaiifar, Alireza

    2014-01-01

    Estimation of urban vulnerability to earthquakes can be consid-ered as an Ill-structured problem in urban in both unplanned and planned areas. Multi-criteria evaluation (MCE) provides a way to integrate different spatial data layers in a geographic information system to create composite maps representing risk. We utilized MCE in a raster Geographic Information System (GIS) to evaluate risk in vulnerable tissues of Tabriz, Iran zone. In this MCE physical risk factors and sub-factors were included and were weighted by experts. Afterward data entered to GIS and then the layers of the criteria were exported. The obtained results were entered to IDRISI and fuzzified. Ultimately the final map of physical vulnerability was outputted by overlaying order. Vulnerable tissues are highly consistent to non-official areas. However, the planned area which is called Valiasr is in low risky condition and this condition is desirable in crisis times. Here, we observe the preference of physical pre-planning operations. The links between urban planning and health are many and varied. Environmental, social and economic conditions in cities can have both positive and negative influences on human health and centre. Urban planning and related professions play an important role in shaping those conditions.

  8. A Comparative Study on Physical Vulnerability of Urban Area against Natural Hazards: Importance of Health Promoting Approach in Civil Engineering

    Directory of Open Access Journals (Sweden)

    Mohsen Ahadnezhad Reveshty

    2014-07-01

    Full Text Available Background: Estimation of urban vulnerability to earthquakes can be considered as an Ill-structured problem in urban in both unplanned and planned ar-eas. Multi-criteria evaluation (MCE provides a way to integrate different spatial data layers in a geographic information system to create composite maps representing risk. We utilized MCE in a raster Geographic Information System (GIS to evaluate risk in vulnerable tissues of Tabriz, Iran zone. Methods: In this MCE physical risk factors and sub-factors were included and were weighted by experts. Afterward data entered to GIS and then the layers of the criteria were exported. The obtained results were entered to IDRISI and fuzzified. Ultimately the final map of physical vulnerability was outputted by overlaying order. Results: Vulnerable tissues are highly consistent to non-official areas. How-ever, the planned area which is called Valiasr is in low risky condition and this condition is desirable in crisis times. Here, we observe the preference of physical pre-planning operations. Conclusion: The links between urban planning and health are many and varied. Environmental, social and economic conditions in cities can have both positive and negative influences on human health and centre. Urban planning and related professions play an important role in shaping those conditions.

  9. Immediate Effects of Combining Local Techniques in the Craniomandibular Area and Hamstring Muscle Stretching in Subjects with Temporomandibular Disorders: A Randomized Controlled Study.

    Science.gov (United States)

    Rodriguez-Blanco, Cleofás; Cocera-Morata, Francisco Miguel; Heredia-Rizo, Alberto Marcos; Ricard, François; Almazán-Campos, Ginés; Oliva-Pascual-Vaca, Ángel

    2015-08-01

    To assess the immediate effects on vertical mouth opening, orofacial mechanosensitivity, and lumbar and suboccipital mobility after adding a myofascial induction technique to a multimodal protocol in subjects with temporomandibular disorders (TMD). A randomized and double-blind controlled trial was carried out. University-based physical therapy research clinic. Sixty subjects (35±11.22 years) with TMD, and restricted mobility of the mandibular condyles and the first cervical vertebrae, were recruited and randomized to either a control group (CG) (n=30) or an experimental group (EG) (n=30). The CG underwent a neuromuscular technique over the masseter muscles and passive hamstring muscle stretching. A suboccipital muscle inhibition technique was added to this protocol in the EG. Primary measurements were made of vertical mouth opening and pressure pain threshold of the masseter muscles. Secondary outcome measures included pressure algometry of the trigeminal nerve, suboccipital range of motion, and lumbar spine mobility, assessed with the sit-and-reach (SAR) test and lumbar forward bending. All evaluations were collected at baseline and immediately after intervention. In the intragroup comparison, the EG observed an increase in suboccipital flexion (p0.05). The inclusion of a myofascial induction maneuver in a protocol combining local (neuromuscular treatment) and distal techniques (hamstring stretching) in subjects with TMD has no impact on improving mouth opening, suboccipital and lumbar mobility, and orofacial sensitivity to mechanical pressure.

  10. Development of a Methodology for Preparing Performance Standards for Operation and Maintenance Activities at Corps of Engineers Recreation Areas.

    Science.gov (United States)

    1980-09-01

    Shrubs, and Vines 70340-49 Outleases 70350-59 Control Measures 70360-69 Recreational Area Maintenance 70370-79 Grass Cutting 70380-89 Tree Pruning ...Tree and Shrub Maintenance: Chip pruned tree limbs (per tree) each 0.08 Hedge triming by hand and dispose of cuttings 100 lin. ft. 2.85 Hedge...tririning, electric and dispose of cuttings 100 lin.ft. 1.56 If ladder is required, add per 100 LF 0.40 Prune shrubs (deciduous) each 0.20 Prune shrubs

  11. A comparison of human jaw muscle cross-sectional area and volume in long- and short-face subjects, using MRI

    NARCIS (Netherlands)

    Boom, H.P.W.; van Spronsen, P.H.; van Ginkel, F.C.; van Schijndel, R.A.; Castelijns, J.A.; Tuinzing, D.B.

    2008-01-01

    Objective In humans, the vertical craniofacial dimensions vary significantly with the size of the jaw muscles, which are regarded as important controlling factors of craniofacial growth. The functional relevance of the maximum cross-sectional area (CSA), indicating maximum muscle strength, is

  12. A comparison of human jaw muscle cross-sectional area and volume in long- and short-face subjects, using MRI

    NARCIS (Netherlands)

    van Spronsena, P. H.; van Ginkel, F. C.; van Schijndel, R. A.; Castelijns, J. A.; Tuinzing, D. B.

    Objective: In humans, the vertical craniofacial dimensions vary significantly with the size of the jaw muscles, which are regarded as important controlling factors of craniofacial growth. The functional relevance of the maximum cross-sectional area (CSA), indicating maximum muscle strength, is

  13. A comparison of human jaw muscle cross-sectional area and volume in long- and short-face subjects, using MRI

    NARCIS (Netherlands)

    Boom, H.P.; van Spronsen, P.H.; van Ginkel, F.C.; van Schijndel, R.A.; Castelijns, J.A.; Tuinzing, D.B.

    2008-01-01

    Objective: In humans, the vertical craniofacial dimensions vary significantly with the size of the jaw muscles, which are regarded as important controlling factors of craniofacial growth. The functional relevance of the maximum cross-sectional area (CSA), indicating maximum muscle strength, is

  14. Ultrasound screening for asymptomatic carotid stenosis in subjects with calcifications in the area of the carotid arteries on panoramic radiographs: a cross-sectional study

    Directory of Open Access Journals (Sweden)

    Karp Kjell

    2011-07-01

    Full Text Available Abstract Background Directed ultrasonic screening for carotid stenosis is cost-effective in populations with > 5% prevalence of the diagnosis. Occasionally, calcifications in the area of the carotid arteries are incidentally detected on odontological panoramic radiographs. We aimed to determine if directed screening for carotid stenosis with ultrasound is indicated in individuals with such calcifications. Methods This was a cross-sectional study. Carotid ultrasound examinations were performed on consecutive persons, with findings of calcifications in the area of the carotid arteries on panoramic radiography that were otherwise eligible for asymptomatic carotid endarterectomy. Results Calcification in the area of the carotid arteries was seen in 176 of 1182 persons undergoing panoramic radiography. Of these, 117 fulfilled the inclusion criterion and were examined with carotid ultrasound. Eight persons (6.8%; 95% CI 2.2-11.5% had a carotid stenosis - not significant over the 5% pre-specified threshold (p = 0.232, Binomial test. However, there was a significant sex difference (p = 0.008, as all stenoses were found in men. Among men, 12.5% (95%CI 4.2-20.8% had carotid stenosis - significantly over the 5% pre-specified threshold (p = 0.014, Binomial test. Conclusions The incidental finding of calcification in the area of the carotid arteries on panoramic radiographs should be followed up with carotid screening in men that are otherwise eligible for asymptomatic carotid endarterectomy. Trial Registration The study was registered at http://www.clinicaltrials.gov; NCT00514644

  15. Teenagers' Significant Experiences in Areas of Arts: A Study of the Subjectively Felt Impact and Some Qualitative Aspects of Experiences Involving Productive Arts Activities

    Science.gov (United States)

    Finnas, Leif

    2012-01-01

    As a part of a larger project, this study focused primarily on Finland-Swedish ninth-graders' "productive" arts experiences (involving music-making, acting, writing, painting/drawing, dancing), as these had been reported when the pupils had been asked to write down descriptions of "strong" experiences in arts areas (music,…

  16. SEARCH FOR QUALITY IN BIOSYSTEM ENGINEERING

    Directory of Open Access Journals (Sweden)

    Bülent Eker

    2012-09-01

    Full Text Available Today, engineering has become a disciplined field. The demand in food products caused the agricultural engineers to consider the matter in a different way. This consideration led the engineer to resolve the biological issues together with electronic and information disciplines and also advanced con trol, advanced technological materials and developed sensor systems. The subject has persuaded them to design solutions for problems related with living things and their environment. Bio - system engineering which has been developed for this purpose has beco me the application of technical knowledge aiming to fulfill the human requirements. The pursuit of bio - system engineering discipline are automation, new developed technologies, information technologies and human interaction, sensitive agriculture techniqu es, power and work machines, product technologies after harvest, structures and relation with environment, animal production technology, soil and water sources, rural development and planning. Bio - system engineering which covers such a wide area should re ach the solution by using its system engineering feature first and then determine the process parameters of the subjects that it resolves. Therefore it has to attribute the reason - result relation in every stage to quality parameters. Therefore, in this a nnouncement, the quality issues necessary for explaining the subjects dealt in bio - system engineering basis are examined one by one and solution models are created depending on these issues.

  17. Contemporary engineering economics

    CERN Document Server

    Park, Chan S

    2011-01-01

    Contemporary Engineering Economics, 5/e, is intended for undergraduate engineering students taking introductory engineering economics while appealing to the full range of engineering disciplines for which this course is often required: industrial, civil, mechanical, electrical, computer, aerospace, chemical, and manufacturing engineering, as well as engineering technology. This edition has been thoroughly revised and updated while continuing to adopt a contemporary approach to the subject, and teaching, of engineering economics. This text aims not only to build a sound and comprehensive coverage of engineering economics, but also to address key educational challenges, such as student difficulty in developing the analytical skills required to make informed financial decisions.

  18. 19 January 2011 - British University of Manchester, Vice-President and Dean for the Faculty of Engineering and Physical Sciences Professor of Structural Engineering School of Mechanical, Aerospace and Civil Engineering C. Bailey in CERN Control Centre with Department Head P. Collier; at LHCb with R. Lindner and ATLAS underground experimental area with Deputy Spokesperson D. Charlton, througout accompanied by . Collier with R. Appleby and F. Loebinger

    CERN Multimedia

    Maximilien Brice

    2011-01-01

    19 January 2011 - British University of Manchester, Vice-President and Dean for the Faculty of Engineering and Physical Sciences Professor of Structural Engineering School of Mechanical, Aerospace and Civil Engineering C. Bailey in CERN Control Centre with Department Head P. Collier; at LHCb with R. Lindner and ATLAS underground experimental area with Deputy Spokesperson D. Charlton, througout accompanied by . Collier with R. Appleby and F. Loebinger

  19. Systems engineering approach to environmental risk management: A case study of depleted uranium at test area C-64, Eglin Air Force Base, Florida. Master`s thesis

    Energy Technology Data Exchange (ETDEWEB)

    Carter, C.M.; Fortmann, K.M.; Hill, S.W.; Latin, R.M.; Masterson, E.J.

    1994-12-01

    Environmental restoration is an area of concern in an environmentally conscious world. Much effort is required to clean up the environment and promote environmentally sound methods for managing current land use. In light of the public consciousness with the latter topic, the United States Air Force must also take an active role in addressing these environmental issues with respect to current and future USAF base land use. This thesis uses the systems engineering technique to assess human health risks and to evaluate risk management options with respect to depleted uranium contamination in the sampled region of Test Area (TA) C-64 at Eglin Air Force Base (AFB). The research combines the disciplines of environmental data collection, DU soil concentration distribution modeling, ground water modeling, particle resuspension modeling, exposure assessment, health hazard assessment, and uncertainty analysis to characterize the test area. These disciplines are required to quantify current and future health risks, as well as to recommend cost effective ways to increase confidence in health risk assessment and remediation options.

  20. Interdisciplinary Area of Research Offers Tool of Cross-Cultural Understanding: Cross-Cultural Student Seminar for Communication Training on Biomedical Engineering

    Directory of Open Access Journals (Sweden)

    Shigehiro Hashimoto

    2013-12-01

    Full Text Available Misunderstanding often occurs in a multidisciplinary field of study, because each field has its own background of thinking. Communication training is important for students, who have a potential to develop the multidisciplinary field of study. Because each nation has its own cultural background, communication in an international seminar is not easy, either. A cross-cultural student seminar has been designed for communication training in the multidisciplinary field of study. Students from a variety of back grounds have joined in the seminar. Both equations and figures are effective tools for communication in the field of science. The seminar works well for communication training in the multidisciplinary field of study of biomedical engineering. An interdisciplinary area of research offers the tool of cross-cultural understanding. The present study refers to author's several experiences: the student internship abroad, the cross-cultural student camp, multi PhD theses, various affiliations, and the creation of the interdisciplinary department.

  1. Enabling area-selective potential-energy engineering in InGaN/GaN quantum wells by post-growth intermixing

    KAUST Repository

    Shen, Chao

    2015-03-19

    We report on a unique area-selective, post-growth approach in engineering the quantum-confined potential-energy profile of InGaN/GaN quantum wells (QWs) utilizing metal/dielectric-coating induced intermixing process. This led to simultaneous realization of adjacent regions with peak emission of 2.74 eV and 2.82 eV with a high spatial resolution (~1 μm) at the coating boundary. The potential profile softening in the intermixed QW light-emitting diode (LED) was experimentally and numerically correlated, shedding light on the origin of alleviated efficiency droop from 30.5% to 16.6% (at 150 A/cm2). The technique is advantageous for fabricating high efficiency light-emitters, and is amenable to monolithic integration of nitride-based photonic devices.

  2. Radiochemical and chemical constituents in water from selected wells and springs from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman area, Idaho, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Bartholomay, R.C.; Williams, L.M. [Geological Survey, Idaho Falls, ID (United States); Campbell, L.J. [Idaho Dept. of Water Resources, Boise, ID (United States)

    1997-06-01

    The US Geological Survey and the Idaho Department of Water Resources, in cooperation with the US Department of Energy, sampled 19 sites as part of the fourth round of a long-term project to monitor water quality of the Snake river Plain aquifer from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman area. Water samples were collected and analyzed for selected radiochemical and chemical constituents. The samples were collected from nine irrigation wells, three domestic wells, two dairy wells, two springs, one commercial well, one stock well, and one observation well. Two quality-assurance samples also were collected and analyzed. Additional sampling at six sites was done to complete the third round of sampling. None of the radiochemical or chemical constituents exceeded the established maximum contaminant levels for drinking water. Many of the radionuclide- and inorganic-constituent concentrations were greater than their respective reporting levels.

  3. Expanding subjectivities

    DEFF Research Database (Denmark)

    Lundgaard Andersen, Linda; Soldz, Stephen

    2012-01-01

    A major theme in recent psychoanalytic thinking concerns the use of therapist subjectivity, especially “countertransference,” in understanding patients. This thinking converges with and expands developments in qualitative research regarding the use of researcher subjectivity as a tool to understa...

  4. Mathematics in Engineering

    OpenAIRE

    Chatterjee, Anindya

    2005-01-01

    I try to convey some of the variety and excitement involved in the application of mathematics to engineering problems; to provide a taste of some actual mathematical calculations that engineers do; and finally, to make clear the distinctions between the applied subject of engineering and its purer parents, which include mathematics and the physical sciences. Two main points of this article are that in engineering it is approximation, and not truth, that reigns; and that an engineer carries a ...

  5. Hidden in plain view: feminists doing engineering ethics, engineers doing feminist ethics.

    Science.gov (United States)

    Riley, Donna

    2013-03-01

    How has engineering ethics addressed gender concerns to date? How have the ideas of feminist philosophers and feminist ethicists made their way into engineering ethics? What might an explicitly feminist engineering ethics look like? This paper reviews some major themes in feminist ethics and then considers three areas in which these themes have been taken up in engineering ethics to date. First, Caroline Whitbeck's work in engineering ethics integrates considerations from her own earlier writings and those of other feminist philosophers, but does not use the feminist label. Second, efforts to incorporate the Ethic of Care and principles of Social Justice into engineering have drawn on feminist scholarship and principles, but these commitments can be lost in translation to the broader engineering community. Third, the film Henry's Daughters brings gender considerations into the mainstream of engineering ethics, but does not draw on feminist ethics per se; despite the best intentions in broaching a difficult subject, the film unfortunately does more harm than good when it comes to sexual harassment education. I seek not only to make the case that engineers should pay attention to feminist ethics and engineering ethicists make more use of feminist ethics traditions in the field, but also to provide some avenues for how to approach integrating feminist ethics in engineering. The literature review and analysis of the three examples point to future work for further developing what might be called feminist engineering ethics.

  6. Factors associated with poor nutritional status among community dwelling Lebanese elderly subjects living in rural areas: results of the AMEL study.

    Science.gov (United States)

    Boulos, C; Salameh, P; Barberger-Gateau, P

    2014-05-01

    This study aimed to assess the nutritional status, measured by MNA, and its association with socio-demographic indicators and health related characteristics of a representative sample of community dwelling elderly subjects. Cross-sectional study. Community dwelling elderly individuals living in rural communities in Lebanon. 1200 elderly individuals aged 65 years or more. Socio-demographic indicators and health related characteristics were recorded during a standardized interview. Nutritional status was assessed through Mini Nutritional Assessment (MNA). The 5-item GDS score and the WHO-5-A score were used to assess mood, whereas Mini Mental Status (MMS) was applied to evaluate cognitive status. The prevalence of malnutrition and risk of malnutrition was 8.0% respective 29.1% of the study sample. Malnutrition was significantly more frequent in elderly subjects aged more than 85 years, in females, widowed and illiterate people. Moreover, participants who reported lower financial status were more often malnourished or at risk of malnutrition. Regarding health status, poor nutritional status was more common among those reporting more than three chronic diseases, taking more than three drugs daily, suffering from chronic pain and those who had worse oral health status. Also, depressive disorders and cognitive dysfunction were significantly related to malnutrition. After multivariate analysis following variables remained independently associated to malnutrition: living in the governorate of Nabatieh (ORa 2.30, 95% CI 1.35 -3.93), reporting higher income (ORa 0.77, 95% CI 0.61-0.97), higher number of comorbidities (ORa 1.22, 95% CI 1.12-1.32), chronic pain (ORa 1.72, 95% CI 1.24-2.39), and depressive disorders (ORa 1.66, 95% CI 1.47-1.88). On the other hand, better cognitive functioning was strongly associated with decreased nutritional risk (ORa 0.27, 95%CI 0.17-0.43). Our results highlighted the close relationship between health status and malnutrition. The

  7. Debris Flow Susceptibility Assessment in the Wudongde Dam Area, China Based on Rock Engineering System and Fuzzy C-Means Algorithm

    Directory of Open Access Journals (Sweden)

    Yanyan Li

    2017-09-01

    Full Text Available Debris flows in the Wudongde dam area, China could pose a huge threat to the running of the power station. Therefore, it is of great significance to carry out a susceptibility analysis for this area. This paper presents an application of the rock engineering system and fuzzy C-means algorithm (RES_FCM for debris flow susceptibility assessment. The watershed of the Jinsha River close to the Wudongde dam site in southwest China was taken as the study area, where a total of 22 channelized debris flow gullies were mapped by field investigations. Eight environmental parameters were selected for debris flow susceptibility assessment, namely, lithology, watershed area, slope angle, stream density, length of the main stream, curvature of the main stream, distance from fault and vegetation cover ratio. The interactions among these parameters and their weightings were determined using the RES method. A debris flow susceptibility map was produced by dividing the gullies into three categories of debris flow susceptibility based on the susceptibility index (SI using the FCM algorithm. The results show that the susceptibility levels for nine of the debris flow gullies are high, nine are moderate and four are low, respectively. The RES based K-means algorithm (RES_KM was used for comparison. The results suggest that the RES_FCM method and the RES_KM method provide very close evaluation results for most of the debris flow gullies, which also agree well with field investigations. The prediction accuracy of the new method is 90.9%, larger than that obtained by the RES_KM method (86.4%. Therefore, the RES_FCM method performs better than the RES_KM method for assessing the susceptibility of debris flows.

  8. Psychosocial working conditions, school sense of coherence and subjective health complaints. A multilevel analysis of ninth grade pupils in the Stockholm area.

    Science.gov (United States)

    Modin, Bitte; Ostberg, Viveca; Toivanen, Susanna; Sundell, Knut

    2011-02-01

    This study explores the psychosocial working conditions of 7930 Swedish 9th grade students, distributed over 475 classes and 130 schools, in relation to their subjective health using multilevel modeling. At the individual level, students with "strained" working conditions in school (i.e. those experiencing a high level of demands in combination with a low level of control) demonstrated significantly worse health compared to students in "low-strain" situations. "Strained" conditions in combination with a weak school-related sense of coherence were especially unfavourable for health. These findings remained significant when support from teachers, school marks, norm-breaking behaviours, family-relations and certain class- and school-contextual conditions were adjusted for. Thus, while demands are an essential part of school work, this study suggests that high levels of control and a strong school-related sense of coherence can protect against the more detrimental effects on health that high demands at school may cause. Copyright © 2010 The Association for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

  9. Biomimetically grown apatite spheres from aggregated bioglass nanoparticles with ultrahigh porosity and surface area imply potential drug delivery and cell engineering applications.

    Science.gov (United States)

    El-Fiqi, Ahmed; Buitrago, Jennifer O; Yang, Sung Hee; Kim, Hae-Won

    2017-09-15

    Here we communicate the generation of biomimetically grown apatite spheres from aggregated bioglass nanoparticles and the potential properties applicable for drug delivery and cell/tissue engineering. Ion releasing nanoparticulates of bioglass (85%SiO 2 -15%CaO) in a mineralizing medium show an intriguing dynamic phenomenon - aggregation, mineralization to apatite, integration and growth into micron-sized (1.5-3μm) spheres. During the progressive ionic dissolution/precipitation reactions, nano-to-micro-morphology, glass-to-crystal composition, and the physico-chemical properties (porosity, surface area, and charge) change dynamically. With increasing reaction period, the apatite becomes more crystallized with increased crystallinity and crystal size, and gets a composition closer to the stoichiometry. The developed microspheres exhibit hierarchical surface nanostructure, negative charge (ς-potential of -20mV), and ultrahigh mesoporosity (mesopore size of 6.1nm, and the resultant surface area of 63.7m 2 /g and pore volume of 0.153cm 3 /g) at 14days of mineralization, which are even higher than those of its precursor bioglass nanoparticles. Thanks to these properties, the biomimetic mineral microspheres take up biological molecules effectively, i.e., loading capacity of positive-charged protein is over 10%. Of note, the release is highly sustainable at a constant rate, i.e., profiling almost 'zero-order' kinetics for 4weeks, suggesting the potential usefulness as protein delivery systems. The biomimetic mineral microspheres hold some remnant Si in the core region, and release calcium, phosphate, and silicate ions over the test period, implying the long-term ionic-related therapeutic functions. The mesenchymal stem cells favour the biomimetic spheres with an excellent viability. Due to the merit of sizes (a few micrometers), the spheres can be intercalated into cells, mediating cellular interactions in 3D cell-spheroid engineering, and also can stimulate osteogenic

  10. Geospatial Engineering

    Science.gov (United States)

    2017-02-22

    that enable terrain visualization . Geospatial engineers manipulate the TGD to create the SSGF. The SSGF is the foundation for the Web map service that...decision aids, and visualization products that enable the commander and staff to visualize the operational environment. Geospatial engineers aid in the...data that provides a common framework for visualizing an area of interest (AOI) to enable mission command and the planning and execution of operational

  11. International Conference on Mechanical Engineering and Technology

    CERN Document Server

    Mechanical Engineering and Technology

    2012-01-01

    The volume includes a set of selected papers extended and revised from the 2011 International Conference on Mechanical Engineering and Technology, held on London, UK, November 24-25, 2011.   Mechanical engineering technology is the application of physical principles and current technological developments to the creation of useful machinery and operation design. Technologies such as solid models may be used as the basis for finite element analysis (FEA) and / or computational fluid dynamics (CFD) of the design. Through the application of computer-aided manufacturing (CAM), the models may also be used directly by software to create "instructions" for the manufacture of objects represented by the models, through computer numerically controlled (CNC) machining or other automated processes, without the need for intermediate drawings.   This volume covers the subject areas of mechanical engineering and technology, and also covers interdisciplinary subject areas of computers, communications, control and automation...

  12. Multiple biomarker responses in Prochilodus lineatus subjected to short-term in situ exposure to streams from agricultural areas in Southern Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Vieira, Carlos Eduardo Delfino [Laboratório de Ecofisiologia Animal — Departamento de Ciências Fisiológicas, Universidade Estadual de Londrina, Paraná (Brazil); Costa, Patrícia Gomes [Laboratório de Microcontaminantes Orgânicos e Ecotoxicologia — Instituto de Oceanografia, Universidade Federal do Rio Grande, Rio Grande do Sul (Brazil); Lunardelli, Bruna; Fernandes de Oliveira, Luciana [Laboratório de Ecofisiologia Animal — Departamento de Ciências Fisiológicas, Universidade Estadual de Londrina, Paraná (Brazil); Costa Cabrera, Liziara da [Laboratório de Análise de Compostos Orgânicos e Metais — Escola de Química e Alimentos, Universidade Federal do Rio Grande, Rio Grande do Sul (Brazil); Risso, Wagner Ezequiel [Laboratório de Ecofisiologia Animal — Departamento de Ciências Fisiológicas, Universidade Estadual de Londrina, Paraná (Brazil); Primel, Ednei Gilberto [Laboratório de Análise de Compostos Orgânicos e Metais — Escola de Química e Alimentos, Universidade Federal do Rio Grande, Rio Grande do Sul (Brazil); and others

    2016-01-15

    In order to assess the quality of streams susceptible to contamination by pesticides we apply biochemical and genotoxic biomarkers in the Neotropical fish Prochilodus lineatus submitted to in situ tests. Fish were caged, for 96 h, in two streams located in areas with intensive use of pesticides, the Apertados (AP) and the Jacutinga (JC), and in a small stream (Godoy stream — GD) found inside a forest fragment adjacent to a State Park. Biochemical parameters, such as biotransformation enzymes 7-ethoxyresorufin-O-deethylase (EROD) and glutathione-S-transferase (GST), non-protein thiols (NPSH), lipoperoxidation (LPO), protein carbonylation (PCO) and acetylcholinesterase (AChE) were evaluated in various fish organs, as well as genotoxic biomarkers (damage to DNA and occurrence of micronuclei and erythrocyte nuclear abnormalities). Samples of water and sediment were collected for analysis of metals (Cu, Cr, Pb, Ni, Mn, Cd and Zn), organochloride pesticides, and triazine and glyphosate herbicides. We observed an increase in liver GST activity in fish at AP and gill GST activity in fish at JC. An increase in liver LPO was also observed in fish exposed to AP and JC. The same animals also exhibited increased DNA damage and erythrocyte nuclear abnormalities (ENAs) compared to the fish kept in GD. A number of compounds showed concentrations higher than the permitted levels, in particular, dichlorodiphenyltrichloroethane (DDT), its metabolites dichlorodiphenyldichloroethylene (DDE) and dichlorodiphenyldichloroethane (DDD), hexachlorocyclohexanes (HCH), heptachloride, diclofluanid and aldrins. These pesticides were detected at higher concentrations in water and sediment samples from AP, followed by JC and GD. The Integrated Biomarker Response Index (IBR) indicated that AP and JC (AP: 21.7 > JC: 18.5 > GD: 12.6) have the worst environmental quality. Integrated biomarker analysis revealed that the alterations observed related well with the levels of environmental contaminants

  13. Hydrogeologic monitoring of the Paraíba do Sul river floodplain area subject to sand mining in the Tremembé municipality, SP, Brazil

    Directory of Open Access Journals (Sweden)

    Getulio Teixeira Batista

    2011-12-01

    Full Text Available To characterize the geological, hydrogeological, hydrochemical, and hydrobacterial aspects of the surface and groundwater in the floodplain of the Paraíba do Sul river in Tremembé municipality, the water levels of the Quaternary sedimentary aquifer experimental site was monitored based on four wells and eight associated piezometers with daily measures of water levels in continuous operation since December 3, 2009. In addition, data from a modular weather station in operation since March 2010 and data from the quality of surface water and groundwater have been analyzed in the period between March 2010 and March 2011. The water balance between April 2010 and March 2011 was estimated to verify the periods of water deficiency and excess. Data loggers installed in the piezometers enabled daily groundwater levels monitoring to establish the influence of the Paraíba do Sul river in the water levels of the Quaternary sedimentary aquifer and also they allowed the determination of the water loss to the atmosphere. A hydrogeological model with simplified equations, based on hydraulics parameters obtained in the wells pump tests, was implemented to calculate the amount of daily evapotranspiration and the average distance of the water loss from the wells to the atmosphere. An evaporation rate of 83.4 m3/h from the open-pit sand mine located at 212.2 m and of 89.2 m3/h for the one at 885.0 m average distance from the monitoring wells were observed. Chemical and bacteriological analysis involving multiple parameters were performed in the period from March 2010 to March 2011 in groundwater collected in wells, in the open-pit mines and in the waters of the Paraíba do Sul river. The results allowed to observe the influences of the Paraíba do Sul river as well as the contamination from fertilizers and pesticides from the agriculture practiced in the floodplain area on the quality of the groundwater.

  14. Photogrammetry and remote sensing education subjects

    Science.gov (United States)

    Lazaridou, Maria A.; Karagianni, Aikaterini Ch.

    2017-09-01

    The rapid technologic advances in the scientific areas of photogrammetry and remote sensing require continuous readjustments at the educational programs and their implementation. The teaching teamwork should deal with the challenge to offer the volume of the knowledge without preventing the understanding of principles and methods and also to introduce "new" knowledge (advances, trends) followed by evaluation and presentation of relevant applications. This is of particular importance for a Civil Engineering Faculty as this in Aristotle University of Thessaloniki, as the framework of Photogrammetry and Remote Sensing is closely connected with applications in the four educational Divisions of the Faculty. This paper refers to the above and includes subjects of organizing the courses in photogrammetry and remote sensing in the Civil Engineering Faculty of Aristotle University of Thessaloniki. A scheme of the general curriculum as well the teaching aims and methods are also presented.

  15. SUBJECT INDEX

    Indian Academy of Sciences (India)

    Subject Index. Variation of surface electric field during geomagnetic disturbed period at Maitri, Antarctica. 1721. Geomorphology. A simple depression-filling method for raster and irregular elevation datasets. 1653. Decision Support System integrated with Geographic. Information System to target restoration actions in water-.

  16. Production of hydrogen driven from biomass waste to power Remote areas away from the electric grid utilizing fuel cells and internal combustion engines vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Tawfik, Hazem [Farmingdale State College, NY (United States)

    2017-03-10

    Recent concerns over the security and reliability of the world’s energy supply has caused a flux towards the research and development of renewable sources. A leading renewable source has been found in the biomass gasification of biological materials derived from organic matters such as wood chips, forest debris, and farm waste that are found in abundance in the USA. Accordingly, there is a very strong interest worldwide in the development of new technologies that provide an in-depth understanding of this economically viable energy source. This work aims to allow the coupling of biomass gasification and fuel cell systems as well as Internal Combustion Engines (ICE) to produce high-energy efficiency, clean environmental performance and near-zero greenhouse gas emissions. Biomass gasification is a process, which produces synthesis gas (syngas) that contains 19% hydrogen and 20% carbon monoxide from inexpensive organic matter waste. This project main goal is to provide cost effective energy to the public utilizing remote farms’ waste and landfill recycling area.

  17. A Transient Numerical Simulation of Perched Ground-Water Flow at the Test Reactor Area, Idaho National Engineering and Environmental Laboratory, Idaho, 1952-94

    Energy Technology Data Exchange (ETDEWEB)

    B. R. Orr (USGS)

    1999-11-01

    Studies of flow through the unsaturated zone and perched ground-water zones above the Snake River Plain aquifer are part of the overall assessment of ground-water flow and determination of the fate and transport of contaminants in the subsurface at the Idaho National Engineering and Environmental Laboratory (INEEL). These studies include definition of the hydrologic controls on the formation of perched ground-water zones and description of the transport and fate of wastewater constituents as they moved through the unsaturated zone. The definition of hydrologic controls requires stratigraphic correlation of basalt flows and sedimentary interbeds within the saturated zone, analysis of hydraulic properties of unsaturated-zone rocks, numerical modeling of the formation of perched ground-water zones, and batch and column experiments to determine rock-water geochemical processes. This report describes the development of a transient numerical simulation that was used to evaluate a conceptual model of flow through perched ground-water zones beneath wastewater infiltration ponds at the Test Reactor Area (TRA).

  18. Enhancement of motor learning by focal intermittent theta burst stimulation (iTBS) of either the primary motor (M1) or somatosensory area (S1) in healthy human subjects.

    Science.gov (United States)

    Platz, Thomas; Adler-Wiebe, Marija; Roschka, Sybille; Lotze, Martin

    2018-01-01

    Motor rehabilitation after brain damage relies on motor re-learning as induced by specific training. Non-invasive brain stimulation (NIBS) can alter cortical excitability and thereby has a potential to enhance subsequent training-induced learning. Knowledge about any priming effects of NIBS on motor learning in healthy subjects can help to design targeted therapeutic applications in brain-damaged subjects. To examine whether complex motor learning in healthy subjects can be enhanced by intermittent theta burst stimulation (iTBS) to primary motor or sensory cortical areas. Eighteen young healthy subjects trained eight different arm motor tasks (arm ability training, AAT) once a day for 5 days using their left non-dominant arm. Except for day 1 (baseline), training was performed after applying an excitatory form of repetitive transcranial magnetic stimulation (iTBS) to either (I) right M1 or (II) S1, or (III) sham stimulation to the right M1. Subjects were randomly assigned to conditions I, II, or III. A principal component analysis of the motor behaviour data suggested eight independent motor abilities corresponding to the 8 trained tasks. AAT induced substantial motor learning across abilities with generalisation to a non-trained test of finger dexterity (Nine-Hole-Peg-Test, NHPT). Participants receiving iTBS (to either M1 or S1) showed better performance with the AAT tasks over the period of training compared to sham stimulation as well as a bigger improvement with the generalisation task (NHPT) for the trained left hand after training completion. Priming with an excitatory repetitive transcranial magnetic stimulation as iTBS of either M1 or S1 can enhance motor learning across different sensorimotor abilities.

  19. Curriculum Outline for Introduction to Engineering Chemistry. Second Edition. Review Cycle-Annual.

    Science.gov (United States)

    Schlenker, Richard M.

    Introduction to Engineering Chemistry is a four-credit hour (one semester) course designed to introduce marine engineering students to the rudiments of basic (introductory) inorganic chemistry. The course consists of 18 units (numbered 1.0 through 18.0) focusing on these subject areas: fundamental concepts; structure of the atom and the periodic…

  20. Heat stress in urban areas: Indoor and outdoor temperatures in different urban structure types and subjectively reported well-being during a heat wave in the city of Leipzig

    Directory of Open Access Journals (Sweden)

    Ulrich Franck

    2013-04-01

    Full Text Available Climate projections for Leipzig suggest elevated minimum and maximum temperatures as well as more frequent days with high temperatures. Hence, climate change is threatening human well-being and health. People spend the majority of their time indoors. Therefore, indoor temperatures (especially during the night are of special importance with respect to well-being and health. Indoor air temperature depends on outdoor air temperatures, but is for example modified by type of urban structure, housing area, and may be also influenced by differences in the behavior of the inhabitants. Especially in cities, outdoor air temperatures depend on urban structure e.g. housing density, building arrangement, unpaved areas, types of urban structures, urban green, and other factors. Hence, the questions arise how types of urban structures are related to inner-urban temperature differences and how outdoor air temperatures influence indoor temperatures in dependence on urban housing conditions. This work is a part of a pilot study conducted during the summer 2010 which gathered data from remote sensing, mobile measurements, stationary measurements of air temperatures and relative humidity in areas with different housing structures, and of indoor as well as outdoor temperatures in occupied apartments. Household-survey data reported the subjective perception of heat stress. The study resulted in rather complex relationships between type of housing areas, indoor and outdoor temperatures, morning and evening temperatures, indoor and outdoor temperatures as well as subjective heat perception. Green spaces and types of residential areas are related to air temperatures. More green resulted in lower temperatures. Temperatures have a tendency to increase with increasing story number and are significantly higher in the top floor. An indoor heat island effect corresponding to the outdoor effect could be shown for the homes: Distance to city center is a predicting variable for

  1. Mechanical engineering education

    CERN Document Server

    Davim, J Paulo

    2012-01-01

    Mechanical Engineering is defined nowadays as a discipline "which involves the application of principles of physics, design, manufacturing and maintenance of mechanical systems". Recently, mechanical engineering has also focused on some cutting-edge subjects such as nanomechanics and nanotechnology, mechatronics and robotics, computational mechanics, biomechanics, alternative energies, as well as aspects related to sustainable mechanical engineering.This book covers mechanical engineering higher education with a particular emphasis on quality assurance and the improvement of academic

  2. Engineering surveying

    CERN Document Server

    Schofield, W

    2007-01-01

    Engineering surveying involves determining the position of natural and man-made features on or beneath the Earth's surface and utilizing these features in the planning, design and construction of works. It is a critical part of any engineering project. Without an accurate understanding of the size, shape and nature of the site the project risks expensive and time-consuming errors or even catastrophic failure.Engineering Surveying 6th edition covers all the basic principles and practice of this complex subject and the authors bring expertise and clarity. Previous editions of this classic text have given readers a clear understanding of fundamentals such as vertical control, distance, angles and position right through to the most modern technologies, and this fully updated edition continues that tradition.This sixth edition includes:* An introduction to geodesy to facilitate greater understanding of satellite systems* A fully updated chapter on GPS, GLONASS and GALILEO for satellite positioning in surveying* Al...

  3. SUBJECT INDEX

    Indian Academy of Sciences (India)

    Administrator

    sensor for methanol determination in the gas phase. 703. Electrochemically active surface area. Platinum-carbon black-titanium dioxide nanocompo- site electrocatalysts for fuel cell applications. 655. Electrochemistry. Synthesis, spectroscopic and redox properties of the mononuclear Ni. II. , Ni. II. (BPh2)2 containing (B–C) ...

  4. SUBJECT INDEX

    Indian Academy of Sciences (India)

    protected areas of Rajasthan, India. 467. Geochemistry. Geochemical constraints on the evolution of mafic and felsic rocks in the Bathani volcanic and volcano- sedimentary sequence of Chotanagpur Granite Gneiss. Complex. 959. Identification and characterization of tsunami deposits off southeast coast of India from the ...

  5. Open Distribution of Virtual Containers as a Key Framework for Open Educational Resources and STEAM Subjects

    Science.gov (United States)

    Corbi, Alberto; Burgos, Daniel

    2017-01-01

    This paper presents how virtual containers enhance the implementation of STEAM (science, technology, engineering, arts, and math) subjects as Open Educational Resources (OER). The publication initially summarizes the limitations of delivering open rich learning contents and corresponding assignments to students in college level STEAM areas. The…

  6. Los talleres de Ingeniería Eléctrica I en la formación del estudiante de Ingeniería Eléctrica; Workshops of the subject Electrical Engineering I in the development off the Electrical Engineering student

    Directory of Open Access Journals (Sweden)

    Ignat Pérez Almirall

    2011-02-01

    Full Text Available En este trabajo se exponen las actividades que se desarrollan en los talleres prácticos de la asignaturaIngeniería Eléctrica I con los alumnos de primer año de la carrera de Ingeniería Eléctrica, con el objetivoque alcancen las habilidades prácticas necesarias que les permita dar solución a un conjunto determinadode problemas prácticos de baja complejidad teórica que se puedan presentar en la vida cotidiana  This work is about the activities carried out by the subject Electrical Engineering I in the workshops withthe first year students so as they can reach the practical skills which will allow then to give solution to agroup of practical problems with low theoretical complexity that are present in everyday life.

  7. Industrial design as an innovative element in engineering education

    DEFF Research Database (Denmark)

    Schjær-Jacobsen, Hans; Abou-Hayt, Imad; Ashworth, David

    2012-01-01

    This paper describes how the Copenhagen University College of Engineering (IHK), in our continuing effort to innovate the engineering study programs, have introduced strong industrial design elements in the 210 ECTS Bachelor of Mechanical Engineering program as well as the 30 ECTS International...... Design Semester and the 10 ECTS Summer School in International Design and Development. The paper describes how implementation of novel industrial design subject areas requires the creation of new laboratory and workshop facilities in order to combine traditional engineering design disciplines...... with creative design as a driver of innovation. With a practical and problem based learning approach at IHK the students are asked to work closely together with companies to come up with engineering solutions that are sustainable from both an engineering and a design perspective....

  8. An analysis of cryotrap heat exchanger performance test data (400 area) and recommendations for a system to handle Apollo RCS engines

    Science.gov (United States)

    Rakow, A.

    1983-01-01

    The current arrangement of a Platecoil heat exchanger which uses LN2 on the inside of parallel tubes, in counter flow to the test cell engine exhaust gases which are drawn through a box surrounding the plates by the existing vacuum blowers is examined. As a result of inadequate performance and special test data it was decided to redesign the system to accommodate an Apollo RCS engine.

  9. Battery systems engineering

    CERN Document Server

    Rahn, Christopher D

    2012-01-01

    A complete all-in-one reference on the important interdisciplinary topic of Battery Systems Engineering Focusing on the interdisciplinary area of battery systems engineering, this book provides the background, models, solution techniques, and systems theory that are necessary for the development of advanced battery management systems. It covers the topic from the perspective of basic electrochemistry as well as systems engineering topics and provides a basis for battery modeling for system engineering of electric and hybrid electric vehicle platforms. This original

  10. Modern engineering thermodynamics

    CERN Document Server

    Balmer, Robert T

    2010-01-01

    Designed for use in a standard two-semester engineering thermodynamics course sequence. The first half of the text contains material suitable for a basic Thermodynamics course taken by engineers from all majors. The second half of the text is suitable for an Applied Thermodynamics course in mechanical engineering programs. The text has numerous features that are unique among engineering textbooks, including historical vignettes, critical thinking boxes, and case studies. All are designed to bring real engineering applications into a subject that can be somewhat abstract and mathematica

  11. Multi-Scale Mass Transfer Processes Controlling Natural Attenuation and Engineered Remediation: An IFRC Focused on Hanford’s 300 Area Uranium Plume

    Energy Technology Data Exchange (ETDEWEB)

    Zachara, John M.; Bjornstad, Bruce N.; Christensen, John N.; Conrad, Mark E.; Fredrickson, Jim K.; Freshley, Mark D.; Haggerty, Roy; Hammon, Glenn; Kent, Douglas B.; Konopka, Allan; Lichtner, Peter C.; Liu, Chongxuan; McKinley, James P.; Murray, Christopher J.; Rockhold, Mark L.; Rubin, Yoram; Vermeul, Vincent R.; Versteeg, Roelof J.; Ward, Anderson L.; Zheng, Chunmiao

    2010-02-01

    The Integrated Field-Scale Subsurface Research Challenge (IFRC) at the Hanford Site 300 Area uranium (U) plume addresses multi-scale mass transfer processes in a complex hydrogeologic setting where groundwater and riverwater interact. A series of forefront science questions on mass transfer are posed for research which relate to the effect of spatial heterogeneities; the importance of scale; coupled interactions between biogeochemical, hydrologic, and mass transfer processes; and measurements and approaches needed to characterize and model a mass-transfer dominated system. The project was initiated in February 2007, with CY 2007 and CY 2008 progress summarized in preceding reports. The site has 35 instrumented wells, and an extensive monitoring system. It includes a deep borehole for microbiologic and biogeochemical research that sampled the entire thickness of the unconfined 300 A aquifer. Significant, impactful progress has been made in CY 2009 with completion of extensive laboratory measurements on field sediments, field hydrologic and geophysical characterization, four field experiments, and modeling. The laboratory characterization results are being subjected to geostatistical analyses to develop spatial heterogeneity models of U concentration and chemical, physical, and hydrologic properties needed for reactive transport modeling. The field experiments focused on: (1) physical characterization of the groundwater flow field during a period of stable hydrologic conditions in early spring, (2) comprehensive groundwater monitoring during spring to characterize the release of U(VI) from the lower vadose zone to the aquifer during water table rise and fall, (3) dynamic geophysical monitoring of salt-plume migration during summer, and (4) a U reactive tracer experiment (desorption) during the fall. Geophysical characterization of the well field was completed using the down-well Electrical Resistance Tomography (ERT) array, with results subjected to robust

  12. New engineering trends emerging

    Energy Technology Data Exchange (ETDEWEB)

    Pinchin, D

    2001-11-01

    Engineering advances in environmental building issues, particularly moulds, odour and air emissions from industrial sites and farm operations and pollution prevention programs are discussed. Large-scale mould remediation projects in high rise office buildings and residential towers constitute a major market for devices designed to stop water leakage and condensation, which are necessary for mould growth, and often are the result of faulty building design or construction. With respect to nuisance odours and airborne substances harmful to health, they are increasingly the subject of concern as intermixing of industrial and residential areas occur, or as housing developments and infilling as well as new construction in farming areas becomes more common. Even the presence of odours which are otherwise harmless, can render some properties unliveable, or affect resale values. Engineering services to address this market include stack testing, predictive impact modelling, olfactometry, product reformulation, industrial ventilation and pollution abatement systems. Pollution prevention programs also received a great boost since the passage of the amendments to the Canadian Environmental Protection Acts of 1999. As a result , pollution prevention plans are now being implemented at the municipal level in various ways. Examples cited are the Toronto requirement of all sectors to develop a pollution prevention plan (P2) and the Region of Waterloo's Business Pollution Prevention Plan for small and medium size businesses. A similar plan is currently under review by the Greater Vancouver Regional District.

  13. Reliability and safety engineering

    CERN Document Server

    Verma, Ajit Kumar; Karanki, Durga Rao

    2016-01-01

    Reliability and safety are core issues that must be addressed throughout the life cycle of engineering systems. Reliability and Safety Engineering presents an overview of the basic concepts, together with simple and practical illustrations. The authors present reliability terminology in various engineering fields, viz.,electronics engineering, software engineering, mechanical engineering, structural engineering and power systems engineering. The book describes the latest applications in the area of probabilistic safety assessment, such as technical specification optimization, risk monitoring and risk informed in-service inspection. Reliability and safety studies must, inevitably, deal with uncertainty, so the book includes uncertainty propagation methods: Monte Carlo simulation, fuzzy arithmetic, Dempster-Shafer theory and probability bounds. Reliability and Safety Engineering also highlights advances in system reliability and safety assessment including dynamic system modeling and uncertainty management. Cas...

  14. International Conference on Software Engineering, Knowledge Engineering and Information Engineering (SEKEIE 2012)

    CERN Document Server

    Software Engineering and Knowledge Engineering: Theory and Practice

    2012-01-01

    2012 International Conference on Software Engineering, Knowledge Engineering and Information Engineering (SEKEIE 2012) will be held in Macau, April 1-2, 2012 . This conference will bring researchers and experts from the three areas of Software Engineering, Knowledge Engineering and Information Engineering together to share their latest research results and ideas.   This volume book covered significant recent developments in the Software Engineering, Knowledge Engineering and Information Engineering field, both theoretical and applied. We are glad this conference attracts your attentions, and thank your support to our conference. We will absorb remarkable suggestion, and make our conference more successful and perfect.

  15. International exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998. Overseas workshop; 1998 nendo gijutsusha koryu jigyo (tanko gijutsu bun'ya) kokusai koryu jigyo. Kaigai workshop

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    The international exchange project for the engineer exchange project (in coal mine technology area) in fiscal 1998, the 'Overseas workshop' has performed exchange in technologies with Australian coal mine engineers. The project refers to the Australian technological levels and needs in coal production, safety control and environment, as well as transfer of the Japanese coal mine technologies. This report summarizes the result of a survey on the engineer exchange project in the coal mine technology area and the possibility of joint researches. The 'overseas workshop' was held in November 1998 for two days in Brisbane City in QLD Province as the 'Japan-Australia coal technology workshop'. The 'Japan-Australia coal technology workshop' gave lectures in five sessions (the basic lecture, Japan-Australia high-speed excavation project, coal mine gas control project, exploration and resources, and development and experience of Japan). It also discussed two themes (mine safety management and rules, and greenhouse effect gases and coal mining). Two coal mines were visited thereafter to deepen the exchange with the Australian coal mine engineers. (NEDO)

  16. Laboratory Evaluation of In Situ Chemical Oxidation for Groundwater Remediation, Test Area North, Operable Unit 1-07B, Idaho National Engineering and Environmental Laboratory, Volume Three - Appendix F

    Energy Technology Data Exchange (ETDEWEB)

    Cline, S.R.; Denton, D.L.; Giaquinto, J.M.; McCracken, M.K.; Starr, R.C.

    1999-04-01

    This appendix supports the results and discussion of the laboratory work performed to evaluate the feasibility of in situ chemical oxidation for Idaho National Environmental and Engineering Laboratory's (INEEL) Test Area North (TAN) which is contained in ORNL/TM-13711/V1. This volume contains Appendix F. Appendix F is essentially a photocopy of the ORNL researchers' laboratory notebooks from the Environmental Sciences Division (ESD) and the Radioactive Materials Analytical Laboratory (RMAL).

  17. Project-Based Learning in the Masters degree in Nuclear Engineering at BarcelonaTECH. Experience gained in the area of Management of Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Reventos, F.; Vives, E.; Brunet, A.; Sabate, R.; Calvino, F.; Batet, L.

    2014-07-01

    From its first edition, that took place in 2011-2012, the Masters degree in Nuclear Engineering from BarcelonaTECH has been using techniques of Project-Based Learning to fulfill the purpose of training nuclear engineers with a profile suitable for positions in the industry. The Master is sponsored by ENDESA and relies on the collaboration with institutions and companies. The Master is embedded in EMINE, the European Master in Innovation in Nuclear Energy, supported by KIC-InnoEnergy and the European Institute of Technology. (Author)

  18. Sustainability in Software Engineering

    NARCIS (Netherlands)

    Wolfram, N.J.E.; Lago, P.; Osborne, Francesco

    2017-01-01

    The intersection between software engineering research and issues related to sustainability and green IT has been the subject of increasing attention. In spite of that, we observe that sustainability is still not clearly defined, or understood, in the field of software engineering. This lack of

  19. NASA Engineering Network (NEN)

    Science.gov (United States)

    Topousis, Daria; Trevarthen, Ellie; Yew, Manson

    2008-01-01

    This slide presentation reviews the NASA Engineering Network (NEN). NEN is designed to search documents over multiple repositories, submit and browse NASA Lessons Learned, collaborate and share ideas with other engineers via communities of practice, access resources from one portal, and find subject matter experts via the People, Organizations, Projects, Skills (POPS) locator.

  20. Changes in Science Teachers' Conceptions and Connections of STEM Concepts and Earthquake Engineering

    Science.gov (United States)

    Cavlazoglu, Baki; Stuessy, Carol

    2017-01-01

    The authors find justification for integrating science, technology, engineering, and mathematics (STEM) in the complex problems that today's students will face as tomorrow's STEM professionals. Teachers with individual subject-area specialties in the STEM content areas have limited experience in integrating STEM. In this study, the authors…

  1. Can and How Might Traineeships Work for Science, Technology, Engineering and Mathematics (STEM) within the Context of a Local Enterprise Partnership (LEP) Area? Discussion Paper

    Science.gov (United States)

    National Institute of Adult Continuing Education, 2014

    2014-01-01

    This discussion paper presents the findings of a situational appraisal undertaken by National Institute of Adult Continuing Education (NIACE) for the Gatsby Charitable Foundation and explores whether and how Traineeships can work for Science, Technology, Engineering and Mathematics (STEM) within the context of a Local Enterprise Partnership (LEP)…

  2. High Technology Development and Creation of Experimental Industrial Area of High-Performance Precision Diamond Dress Tool Production for Engineering Needs and Import Substitution in Ukraine

    Directory of Open Access Journals (Sweden)

    N. Novikov

    2013-09-01

    Full Text Available Manufacturing design of high-precision diamond tool for special applications carried out at V. M Bakul Institute for Superhard Materials of NAS of Ukraine is described. Presented developments open up scientific and technological capabilities of special dress diamond tool production for mechanical engineering and substitution of imported tools at Ukrainian enterprises by home-produced.

  3. Engineering in translational medicine

    CERN Document Server

    2014-01-01

    This book covers a broad area of engineering research in translational medicine. Leaders in academic institutions around the world contributed focused chapters on a broad array of topics such as: cell and tissue engineering (6 chapters), genetic and protein engineering (10 chapters), nanoengineering (10 chapters), biomedical instrumentation (4 chapters), and theranostics and other novel approaches (4 chapters). Each chapter is a stand-alone review that summarizes the state-of-the-art of the specific research area. Engineering in Translational Medicine gives readers a comprehensive and in-depth overview of a broad array of related research areas, making this an excellent reference book for scientists and students both new to engineering/translational medicine and currently working in this area.

  4. Engineering Encounters: Reverse Engineering

    Science.gov (United States)

    McGowan, Veronica Cassone; Ventura, Marcia; Bell, Philip

    2017-01-01

    This column presents ideas and techniques to enhance your science teaching. This month's issue shares information on how students' everyday experiences can support science learning through engineering design. In this article, the authors outline a reverse-engineering model of instruction and describe one example of how it looked in our fifth-grade…

  5. Electrothermal evaluation of thick GaN epitaxial layers and AlGaN/GaN high-electron-mobility transistors on large-area engineered substrates

    Science.gov (United States)

    Anderson, Travis J.; Koehler, Andrew D.; Tadjer, Marko J.; Hite, Jennifer K.; Nath, Anindya; Mahadik, Nadeemullah A.; Aktas, Ozgur; Odnoblyudov, Vladimir; Basceri, Cem; Hobart, Karl D.; Kub, Francis J.

    2017-12-01

    AlGaN/GaN high-electron-mobility transistor (HEMT) device layers were grown by metal organic chemical vapor deposition (MOCVD) on commercial engineered QST™ substrates to demonstrate a path to scalable, cost-effective foundry processing while supporting the thick epitaxial layers required for power HEMT structures. HEMT structures on 150 mm Si substrates were also evaluated. The HEMTs on engineered substrates exhibited material quality, DC performance, and forward blocking performance superior to those of the HEMT on Si. GaN device layers up to 15 µm were demonstrated with a wafer bow of 1 µm, representing the thickest films grown on 150-mm-diameter substrates with low bow to date.

  6. Intelligence-based systems engineering

    CERN Document Server

    Tolk, Andreas

    2011-01-01

    The International Council on Systems Engineering (INCOSE) defines Systems Engineering as an interdisciplinary approach and means to enable the realization of successful systems. Researchers are using intelligence-based techniques to support the practices of systems engineering in an innovative way. This research volume includes a selection of contributions by subject experts to design better systems.

  7. Las ontologías en la ingeniería de software: un acercamiento de dos grandes áreas del conocimiento Ontologies in software engineering: approaching two great knowledge areas

    Directory of Open Access Journals (Sweden)

    Carlos Mario Zapata Jaramillo

    2010-01-01

    Full Text Available Los conceptos ontológicos se suelen acercar más a la ingeniería del conocimiento, por lo que los ingenieros del software no los suelen aplicar para resolver problemas de su área. Es necesario que los ingenieros de software se apropien de las ontologías, pues éstas proporcionan un vocabulario común, que podría contribuir en la solución de problemas recurrentes en ingeniería del software, tales como la dificultad de la comunicación entre analista e interesado para definir los requisitos de un sistema, la baja reutilización de componentes y la escasa generación automática de código, entre otros. En este artículo se presenta un primer enlace entre las ontologías y la ingeniería de software mediante la recopilación y análisis de la literatura relativa a la utilización de las ontologías en las diferentes fases del ciclo de vida de un producto de software.Ontology concepts have been traditionally linked to knowledge engineering and software engineers have not applied them to solve problems of this area. It is necessary that software engineers use these ontologies, since they provide a common language, which can contribute to the solution of some common software engineering problems like difficulties in communication between the analyst and the interested person in order to define a system requirements, the low components re-use, and scarce automatic generation in code generation, among others. In this paper, a first encounter between ontologies and software engineering by means of a state-of-the-art analysis related to the use of ontologies in several phases of software development life cycle is presented.

  8. FY2012 Engineering Research & Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Lane, Monya

    2014-07-22

    This report documents engineering research, development, and technology advancements performed by LLNL during fiscal year 2012 in the following areas: computational engineering, engineering information systems, micro/nano-devices and structures, and measurement technologies.

  9. Software engineer's pocket book

    CERN Document Server

    Tooley, Michael

    2013-01-01

    Software Engineer's Pocket Book provides a concise discussion on various aspects of software engineering. The book is comprised of six chapters that tackle various areas of concerns in software engineering. Chapter 1 discusses software development, and Chapter 2 covers programming languages. Chapter 3 deals with operating systems. The book also tackles discrete mathematics and numerical computation. Data structures and algorithms are also explained. The text will be of great use to individuals involved in the specification, design, development, implementation, testing, maintenance, and qualit

  10. Annual Site Environmental Report, Department of Energy Operations at the Energy Technology Engineering Center – Area IV, Santa Susana Field Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Frazee, Brad [North Wind, Inc., Idaho Falls, ID (United States); Hay, Scott [North Wind, Inc., Idaho Falls, ID (United States); Wondolleck, John [North Wind, Inc., Idaho Falls, ID (United States); Sorrels, Earl [North Wind, Inc., Idaho Falls, ID (United States); Rutherford, Phil [North Wind, Inc., Idaho Falls, ID (United States); Dassler, David [North Wind, Inc., Idaho Falls, ID (United States); Jones, John [North Wind, Inc., Idaho Falls, ID (United States)

    2015-05-01

    This Annual Site Environmental Report (ASER) for 2014 describes the environmental conditions related to work performed for the DOE at Area IV of the Santa Susana Field Laboratory (SSFL). The ETEC, a government-owned, company-operated test facility, was located in Area IV. The operations in Area IV included development, fabrication, operation and disassembly of nuclear reactors, reactor fuel, and other radioactive materials. Other activities in the area involved the operation of large-scale liquid metal facilities that were used for testing non-nuclear liquid metal fast breeder reactor components. All nuclear work was terminated in 1988, and all subsequent radiological work has been directed toward environmental restoration and decontamination and decommissioning (D&D) of the former nuclear facilities and their associated sites. Liquid metal research and development ended in 2002. Since May 2007, the D&D operations in Area IV have been suspended by the DOE, but the environmental monitoring and characterization programs have continued. Results of the radiological monitoring program continue to indicate that there are no significant releases of radioactive material from Area IV of SSFL. All potential exposure pathways are sampled and/or monitored, including air, soil, surface water, groundwater, direct radiation, transfer of property (land, structures, waste), and recycling.

  11. Report for 1979-1980, 1980-1981 of the Division of Engineering and Applied Science at the California Institute of Technology. [California Institute of Technology

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    This volume discusses new activities at the Division of Engineering and Applied Science at Caltech, lists its Sherman Fairchild Distinguished Scholars and all instructional staff, and reports on research projects in the following subject areas: aeronautics; applied mathematics; mechanical civil, electrical and environmental engineering; materials science; applied and biofluid mechanics; materials science; applied physics; bioinformation systems; and computer science. (LCL)

  12. Engineer Ethics

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dae Sik; Kim, Yeong Pil; Kim, Yeong Jin

    2003-03-15

    This book tells of engineer ethics such as basic understanding of engineer ethics with history of engineering as a occupation, definition of engineering and specialized job and engineering, engineer ethics as professional ethics, general principles of ethics and its limitation, ethical theory and application, technique to solve the ethical problems, responsibility, safety and danger, information engineer ethics, biotechnological ethics like artificial insemination, life reproduction, gene therapy and environmental ethics.

  13. Laboratory Evaluation of In Situ Chemical Oxidation for Groundwater Remediation, Test Area North, Operable Unit 1-07B, Idaho National Engineering and Environmental Laboratory, Volume Four - Appendix G

    Energy Technology Data Exchange (ETDEWEB)

    Cline, S.R.; Denton, D.L.; Giaquinto, J.M.; McCracken, M.K.; Starr, R.C.

    1999-04-01

    This appendix supports the results and discussion of the laboratory work performed to evaluate the feasibility of in situ chemical oxidation for Idaho National Environmental and Engineering Laboratory's (INEEL) Test Area North (TAN) which is contained in ORNL/TM-13711/V1. This volume contains Appendix G. Appendix G is a presentation of VOC chromatography data collected during the study. Information on the calibration curves and calibration checks used as well as the sample GC reports themselves are included here. The concentration values presented on the GC reports are calculation using the data from the applicable calibration curve and any necessary dilutions which were made.

  14. Chemical Engineering in Space

    Science.gov (United States)

    Lobmeyer, Dennis A.; Meneghelli, Barry; Steinrock, Todd (Technical Monitor)

    2001-01-01

    sources is paramount to success. We are currently working on several processes to produce the propellants that would allow us to visit and explore the surface of Mars. The capabilities currently at our disposal for launching and delivering equipment to another planet or satellite dictate that the size and scale of any hardware must be extremely small. The miniaturization of the processes needed to prepare the in situ propellants and life support commodities is a real challenge. Chemical engineers are faced with the prospect of reproducing an entire production facility in miniature so the complex can be lifted into space and delivered to our destination. Another area that does not normally concern chemical engineers is the extreme physical aspects payloads are subjected to with the launch of a spacecraft. Extreme accelerations followed by the sudden loss of nearly all gravitational forces are well outside normal equipment design conditions. If the equipment cannot survive the overall trip, then it obviously will not be able to yield the needed products upon arrival. These launch constraints must be taken into account. Finally, we must consider both the effectiveness and efficiencies of the processes. A facility located on the Moon or Mars will not have an unlimited supply of power or other ancillary utilities. For a Mars expedition, the available electric power is severely limited. The design of both the processes and the equipment must be considered. With these constraints in mind, only the most efficient designs will be viable. Cryogenics, in situ resource utilization, miniaturization, launchability, and power/process efficiencies are only a few of the areas that chemical engineers provide support and expertise for the exploration of space.

  15. Multi-function Waste Tank Facility path forward engineering analysis -- Technical Task 3.6, Estimate of operational risk in 200 West Area

    Energy Technology Data Exchange (ETDEWEB)

    Coles, G.A.

    1995-04-28

    Project W-0236A has been proposed to provide additional waste tank storage in the 200 East and 200 West Areas. This project would construct two new waste tanks in the 200 West Area and four new tanks in the 200 East Area, and a related project (Project W-058) would construct a new cross-site line. These projects are intended to ensure sufficient space and flexibility for continued tank farm operations, including tank waste remediation and management of unforeseen contingencies. The objective of this operational risk assessment is to support determination of the adequacy of the free-volume capacity provided by Projects W-036A and W-058 and to determine related impacts. The scope of the assessment is the 200 West Area only and covers the time period from the present to the year 2005. Two different time periods were analyzed because the new cross-site tie line will not be available until 1999. The following are key insights: success of 200 West Area tank farm operations is highly correlated to the success of the cross-site transfer line and the ability of the 200 East Area to receive waste from 200 West; there is a high likelihood of a leak on a complexed single-shell tank in the next 4 years (sampling pending); there is a strong likelihood, in the next 4 years, that some combination of tank leaks, facility upsets, and cross-site line failure will require more free tank space than is currently available in Tank 241-SY-102; in the next 4 to 10 years, there is a strong likelihood that a combination of a cross-site line failure and the need to accommodate some unscheduled waste volume will require more free tank space than is presently available in Tank 241-SY-102; the inherent uncertainty in volume projections is in the range of 3 million gallons; new million-gallon tanks increase the ability to manage contingencies and unplanned events.

  16. Cold-air performance of a 15.41-cm-tip-diameter axial-flow power turbine with variable-area stator designed for a 75-kW automotive gas turbine engine

    Science.gov (United States)

    Mclallin, K. L.; Kofskey, M. G.; Wong, R. Y.

    1982-01-01

    An experimental evaluation of the aerodynamic performance of the axial flow, variable area stator power turbine stage for the Department of Energy upgraded automotive gas turbine engine was conducted in cold air. The interstage transition duct, the variable area stator, the rotor, and the exit diffuser were included in the evaluation of the turbine stage. The measured total blading efficiency was 0.096 less than the design value of 0.85. Large radial gradients in flow conditions were found at the exit of the interstage duct that adversely affected power turbine performance. Although power turbine efficiency was less than design, the turbine operating line corresponding to the steady state road load power curve was within 0.02 of the maximum available stage efficiency at any given speed.

  17. Engineering viscoelasticity

    CERN Document Server

    Gutierrez-Lemini, Danton

    2014-01-01

    Engineering Viscoelasticity covers all aspects of the thermo- mechanical response of viscoelastic substances that a practitioner in the field of viscoelasticity would need to design experiments, interpret test data, develop stress-strain models, perform stress analyses, design structural components, and carry out research work. The material in each chapter is developed from the elementary to the advanced, providing the background in mathematics and mechanics that are central to understanding the subject matter being presented. The book examines how viscoelastic materials respond to the application of loads, and provides practical guidelines to use them in the design of commercial, military and industrial applications. This book also: ·         Facilitates conceptual understanding by progressing in each chapter from elementary to challenging material ·         Examines in detail both differential and integral constitutive equations, devoting full chapters to each type and using both forms in ...

  18. Biomedical Engineering Desk Reference

    CERN Document Server

    Ratner, Buddy D; Schoen, Frederick J; Lemons, Jack E; Dyro, Joseph; Martinsen, Orjan G; Kyle, Richard; Preim, Bernhard; Bartz, Dirk; Grimnes, Sverre; Vallero, Daniel; Semmlow, John; Murray, W Bosseau; Perez, Reinaldo; Bankman, Isaac; Dunn, Stanley; Ikada, Yoshito; Moghe, Prabhas V; Constantinides, Alkis

    2009-01-01

    A one-stop Desk Reference, for Biomedical Engineers involved in the ever expanding and very fast moving area; this is a book that will not gather dust on the shelf. It brings together the essential professional reference content from leading international contributors in the biomedical engineering field. Material covers a broad range of topics including: Biomechanics and Biomaterials; Tissue Engineering; and Biosignal Processing* A hard-working desk reference providing all the essential material needed by biomedical and clinical engineers on a day-to-day basis * Fundamentals, key techniques,

  19. World Congress on Engineering 2015

    CERN Document Server

    Yang, Gi-Chul; Gelman, Len

    2016-01-01

    This volume presents selected peer-reviewed, revised and extended research articles written by prominent researchers who participated in the World Congress on Engineering 2015, held in London, UK, 1-3 July, 2015. This large international conference covered advances in engineering technologies and the physical sciences, with contributions on subjects including mechanical engineering, bioengineering, internet engineering, image engineering, wireless networks, knowledge engineering, manufacturing engineering, and industrial applications. This book offers a snapshot of the state-of-the-art, highlighting tremendous advances in engineering technologies and physical sciences and their applications, and will serve as an excellent reference for researchers and graduate students working in many different disciplines of physical sciences and engineering.

  20. Lasers and optical engineering

    CERN Document Server

    Das, P

    1991-01-01

    A textbook on lasers and optical engineering should include all aspects of lasers and optics; however, this is a large undertaking. The objective of this book is to give an introduction to the subject on a level such that under­ graduate students (mostly juniors/seniors), from disciplines like electrical engineering, physics, and optical engineering, can use the book. To achieve this goal, a lot of basic background material, central to the subject, has been covered in optics and laser physics. Students with an elementary knowledge of freshman physics and with no formal courses in electromagnetic theory should be able to follow the book, although for some sections, knowledge of electromagnetic theory, the Fourier transform, and linear systems would be highly beneficial. There are excellent books on optics, laser physics, and optical engineering. Actually, most of my knowledge was acquired through these. However, when I started teaching an undergraduate course in 1974, under the same heading as the title of th...

  1. Cell and Tissue Engineering

    CERN Document Server

    2012-01-01

    “Cell and Tissue Engineering” introduces the principles and new approaches in cell and tissue engineering. It includes both the fundamentals and the current trends in cell and tissue engineering, in a way useful both to a novice and an expert in the field. The book is composed of 13 chapters all of which are written by the leading experts. It is organized to gradually assemble an insight in cell and tissue function starting form a molecular nano-level, extending to a cellular micro-level and finishing at the tissue macro-level. In specific, biological, physiological, biophysical, biochemical, medical, and engineering aspects are covered from the standpoint of the development of functional substitutes of biological tissues for potential clinical use. Topics in the area of cell engineering include cell membrane biophysics, structure and function of the cytoskeleton, cell-extracellular matrix interactions, and mechanotransduction. In the area of tissue engineering the focus is on the in vitro cultivation of ...

  2. Urban heritage value and seismic vulnerability mapping: challenges for engineering and architectural assessments. Case study of a protected area in Bucharest, Romania

    Directory of Open Access Journals (Sweden)

    Emil-Sever GEORGESCU

    2015-07-01

    Full Text Available The paper evaluates the urban heritage situation at almost four decades after the Bucharest, March 4, 1977 earthquake disaster, followed by a razing of the present Civic Center area and a large-scale remodeling project. The first results of the URBASRISK Project (2012 are presented as a contribution to a new multi-hazard paradigm to cope with European urban scale threats, especially in heritage areas, with a case study of a historic zone now designated as protected area. The cultural and utility value was identified and graded on specific scales for further analysis and mapping. For this phase of study some data of 1977 were adjusted to express the vulnerability by the Mean Damage Degree, GA, with a possibility to make corrections after visual inspection. The URBASRISKdb geodatabase was created for storing the attributes of the buildings. The basic source, i.e. the ESRI World Street Map layer, was verified against satellite, aerial and street views freely available online from various providers. The final version of the map was obtained by also considering information obtained by field visits.

  3. Occupation as a factor of personality subjective wellbeing.

    Directory of Open Access Journals (Sweden)

    Karapetyan L.V.

    2015-06-01

    Full Text Available This article examines personality subjective well-being and describes its psychological structure, general components and characteristics. An overview of foreign theories and studies on subjective well-being is presented. Correlations among related concepts such as happiness, life satisfaction and subjective well-being are also described. Subjective well-being is seen as a multivariate construction of a stable nature in mobile equilibrium. It is argued that a type of professional activity can have great importance and a positive impact on an individual’s social life, health, identity shaping and psychological wellness. This article’s findings are substantiated by the survey administered to 2229 respondents divided into groups according to their area of business: students, psychologists, doctors, teachers, engineering and technical staff, representatives of service industries, workers, military men, and prisoners. The descriptors identified two types of natures: positive, directed to a person’s inner world (happy, lucky, optimistic and to the outer world (trustworthy, competent, successful, and negative (pessimistic, unhappy, envious. This division of nature type was categorized according to the participants’ subjective well-being index. Empirical evidence has shown that occupational specificity influences a person’s subjective well-being. A substantial difference was found in subjective well-being index of the respondents. A higher index is typical of students and military men. Educators and industrial intelligentsia also demonstrate an increased level of subjective well-being, whereas prisoners tend to have a low level of subjective well-being. The same low index is characteristic of servicing trade representatives and psychologists.

  4. Engineering ceramics

    CERN Document Server

    Bengisu, Murat

    2001-01-01

    This is a comprehensive book applying especially to junior and senior engineering students pursuing Materials Science/ Engineering, Ceramic Engineering and Mechanical Engineering degrees. It is also a reference book for other disciplines such as Chemical Engineering, Biomedical Engineering, Nuclear Engineering and Environmental Engineering. Important properties of most engineering ceramics are given in detailed tables. Many current and possible applications of engineering ceramics are described, which can be used as a guide for materials selection and for potential future research. While covering all relevant information regarding raw materials, processing properties, characterization and applications of engineering ceramics, the book also summarizes most recent innovations and developments in this field as a result of extensive literature search.

  5. Geologic processes in the RWMC area, Idaho National Engineering Laboratory: Implications for long term stability and soil erosion at the radioactive waste management complex

    Energy Technology Data Exchange (ETDEWEB)

    Hackett, W.R.; Tullis, J.A.; Smith, R.P. [and others

    1995-09-01

    The Radioactive Waste Management Complex (RWMC) is the disposal and storage facility for low-level radioactive waste at the Idaho National Engineering Laboratory (INEL). Transuranic waste and mixed wastes were also disposed at the RWMC until 1970. It is located in the southwestern part of the INEL about 80 km west of Idaho Falls, Idaho. The INEL occupies a portion of the Eastern Snake River Plain (ESRP), a low-relief, basalt, and sediment-floored basin within the northern Rocky Mountains and northeastern Basin and Range Province. It is a cool and semiarid, sagebrush steppe desert characterized by irregular, rolling terrain. The RWMC began disposal of INEL-generated wastes in 1952, and since 1954, wastes have been accepted from other Federal facilities. Much of the waste is buried in shallow trenches, pits, and soil vaults. Until about 1970, trenches and pits were excavated to the basalt surface, leaving no sediments between the waste and the top of the basalt. Since 1970, a layer of sediment (about 1 m) has been left between the waste and the basalt. The United States Department of Energy (DOE) has developed regulations specific to radioactive-waste disposal, including environmental standards and performance objectives. The regulation applicable to all DOE facilities is DOE Order 5820.2A (Radioactive Waste Management). An important consideration for the performance assessment of the RWMC is the long-term geomorphic stability of the site. Several investigators have identified geologic processes and events that could disrupt a radioactive waste disposal facility. Examples of these {open_quotes}geomorphic hazards{close_quotes} include changes in stream discharge, sediment load, and base level, which may result from climate change, tectonic processes, or magmatic processes. In the performance assessment, these hazards are incorporated into scenarios that may affect the future performance of the RWMC.

  6. Area 2. Use Of Engineered Nanoparticle-Stabilized CO2 Foams To Improve Volumetric Sweep Of CO2 EOR Processes

    Energy Technology Data Exchange (ETDEWEB)

    DiCarlo, David [Univ. of Texas, Austin, TX (United States); Huh, Chun [Univ. of Texas, Austin, TX (United States); Johnston, Keith P. [Univ. of Texas, Austin, TX (United States)

    2015-01-31

    The goal of this project was to develop a new CO2 injection enhanced oil recovery (CO2-EOR) process using engineered nanoparticles with optimized surface coatings that has better volumetric sweep efficiency and a wider application range than conventional CO2-EOR processes. The main objectives of this project were to (1) identify the characteristics of the optimal nanoparticles that generate extremely stable CO2 foams in situ in reservoir regions without oil; (2) develop a novel method of mobility control using “self-guiding” foams with smart nanoparticles; and (3) extend the applicability of the new method to reservoirs having a wide range of salinity, temperatures, and heterogeneity. Concurrent with our experimental effort to understand the foam generation and transport processes and foam-induced mobility reduction, we also developed mathematical models to explain the underlying processes and mechanisms that govern the fate of nanoparticle-stabilized CO2 foams in porous media and applied these models to (1) simulate the results of foam generation and transport experiments conducted in beadpack and sandstone core systems, (2) analyze CO2 injection data received from a field operator, and (3) aid with the design of a foam injection pilot test. Our simulator is applicable to near-injection well field-scale foam injection problems and accounts for the effects due to layered heterogeneity in permeability field, foam stabilizing agents effects, oil presence, and shear-thinning on the generation and transport of nanoparticle-stabilized C/W foams. This report presents the details of our experimental and numerical modeling work and outlines the highlights of our findings.

  7. Nuclear engineering vocabulary

    Energy Technology Data Exchange (ETDEWEB)

    Dumont, X. [FRAMATOME, Dept. Corporate R and D, 92 - Paris-La-Defence (France); Andrieux, C. [CEA Saclay, Direction des Technologies de l' Information, DTI, 91 - Gif sur Yvette (France)

    2001-07-01

    The members of the CSTNIN - the Special Commission for Nuclear Engineering Terminology and Neology - have just produced a Nuclear Engineering Vocabulary, published by SFEN. A 120-page document which, to date, includes 400 nuclear engineering terms or expressions. For each term or expression, this Glossary gives: the primary and secondary subject field in which it is applied, a possible abbreviation, its definition, a synonym if appropriate, any relevant comments, any associated word(s), the English equivalent, its status on the date of publication of the Glossary. (author)

  8. Understanding Engineering Ethics

    Directory of Open Access Journals (Sweden)

    Abdi O. Shuriye

    2012-01-01

    Full Text Available Engineering ethics aims to enhance engineer’s ability to confront moral issues raised by engineering activities. It covers engineering as social experimentation, the engineer’s responsibility for safety, and the rights of engineers. What constitutes engineering ethics is the underlining question of this research. Hence, the objective of the research is to systematically provide answers to the aforementioned question. The research also studies the scope and the origin of the subject matter. At the same time, the research highlights the significance of the subject from diverse perspectives; including Western and Islamic perspectives. ABSTRAK: Etika kejuruteraan bertujuan meningkatkan keupayaan juruera menghadapi isu-isu moralyang timbul dari aktiviti-aktiviti kejuruteraan. Ia merangkumi kejuruteraan sebagai eksperimentasi sosial, tanggungjawab jurutera terhadap keselamatan dan hak-hak jurutera. Persoalan utama penyelidikan ini adalah apa yang merangkumi etika kejuruteraan. Penyelidikan ini juga mengkaji skop dan asal usul etika kejuruteraan. Kajian ini turut membincangkan subjek kajian dari pelbagai perspektif, Barat dan Islam.KEYWORDS: engineering ethics; engineer; akhlaq; values; confidentiality; corruption; conflict of interest; whistle-blowing

  9. Fire-safety engineering and performance-based codes

    DEFF Research Database (Denmark)

    Sørensen, Lars Schiøtt

    and respiratory physiology • Combustion and natural fires • Explosion theory • Fire Chemistry • Fire Extinction Chemistry and Physics • Evacuation and human behaviour during a fire • Sensitivity and risk analysis • Fire Models • Emission and Radiation Theory......Fire-safety Engineering is written as a textbook for Engineering students at universities and other institutions of higher education that teach in the area of fire. The book can also be used as a work of reference for consulting engineers, Building product manufacturers, contractors, building...... project administrators, etc. The book deals with the following topics: • Historical presentation on the subject of fire • Legislation and building project administration • European fire standardization • Passive and active fire protection • Performance-based Codes • Fire-safety Engineering • Fundamental...

  10. Construction informatics - Issues in engineering, computer science and ontology

    DEFF Research Database (Denmark)

    Eir, Asger

    2004-01-01

    This Ph.D. thesis studies issues in the area of construction informatics. Construction informatics is the theoretical study of formal and conceptual aspects in the domain of civil engineering and design. The thesis is a collection of papers which each treat a specific subject within domain analysis...... and conceptual modelling of civil engineering and design. Due to the interdisciplinary content, the first half of the study has been carried out at Department of Civil Engineering (BYG"DTU), The Technical University of Denmark; whereas the second half has been carried out at Informatics and Mathematical....... The issues of the thesis are treated from three angles: from computer science, from civil engineering and design theory, and from philosophy. It is characteristic for the thesis that these angles are all present in analysis and argumentation. The philosophical aspect is a natural ingredient as construction...

  11. Fire-safety engineering and performance-based codes

    DEFF Research Database (Denmark)

    Sørensen, Lars Schiøtt

    Fire-safety Engineering is written as a textbook for Engineering students at universities and other institutions of higher education that teach in the area of fire. The book can also be used as a work of reference for consulting engineers, Building product manufacturers, contractors, building...... project administrators, etc. The book deals with the following topics: • Historical presentation on the subject of fire • Legislation and building project administration • European fire standardization • Passive and active fire protection • Performance-based Codes • Fire-safety Engineering • Fundamental...... and respiratory physiology • Combustion and natural fires • Explosion theory • Fire Chemistry • Fire Extinction Chemistry and Physics • Evacuation and human behaviour during a fire • Sensitivity and risk analysis • Fire Models • Emission and Radiation Theory...

  12. Microscale technologies for cell engineering

    CERN Document Server

    Gaharwar, Akhilesh

    2016-01-01

    This book offers readers cutting-edge research at the interface of polymer science and engineering, biomedical engineering, materials science, and biology. State-of-the-art developments in microscale technologies for cell engineering applications are covered, including technologies relevant to both pluripotent and adult stem cells, the immune system, and somatic cells of the animal and human origin. This book bridges the gap in the understanding of engineering biology at multiple length scale, including microenvironmental control, bioprocessing, and tissue engineering in the areas of cardiac, cartilage, skeletal, and vascular tissues, among others. This book also discusses unique, emerging areas of micropatterning and three-dimensional printing models of cellular engineering, and contributes to the better understanding of the role of biophysical factors in determining the cell fate. Microscale Technologies for Cell Engineering is valuable for bioengineers, biomaterial scientists, tissue engineers, clinicians,...

  13. Praxis, subjectivity and sense

    Directory of Open Access Journals (Sweden)

    Alfredo Gómez-Muller

    2006-07-01

    Full Text Available A primordial aspect of the Sartrian critique of alienation concerns understanding the analytic ideology as the domination of materiality over the symbolic, in other words as the reification of the human, and therefore as anticulture. In the context of contemporary nihilism, the decoding of the mechanisms which consign praxis to the practico-inert requires a critique of the relations between the social sciences and philosophy, which in its turn implies a new theory of the relation between what Sartre calls the "notion" (the area of subjectivity and the "concept" (objectivity, From this perspective, the deconstruction of the established frontiers between the social sciences and philosophy, and between the conceptual and the narrative, is corelative to a redefinition of the relation between theory and practice.

  14. Cosmic-Ray Background Flux Model based on a Gamma-Ray Large-Area Space Telescope Balloon Flight Engineering Model

    Energy Technology Data Exchange (ETDEWEB)

    Mizuno, T

    2004-09-03

    Cosmic-ray background fluxes were modeled based on existing measurements and theories and are presented here. The model, originally developed for the Gamma-ray Large Area Space Telescope (GLAST) Balloon Experiment, covers the entire solid angle (4{pi} sr), the sensitive energy range of the instrument ({approx} 10 MeV to 100 GeV) and abundant components (proton, alpha, e{sup -}, e{sup +}, {mu}{sup -}, {mu}{sup +} and gamma). It is expressed in analytic functions in which modulations due to the solar activity and the Earth geomagnetism are parameterized. Although the model is intended to be used primarily for the GLAST Balloon Experiment, model functions in low-Earth orbit are also presented and can be used for other high energy astrophysical missions. The model has been validated via comparison with the data of the GLAST Balloon Experiment.

  15. Mechanical engineering

    CERN Document Server

    Darbyshire, Alan

    2010-01-01

    Alan Darbyshire's best-selling text book provides five-star high quality content to a potential audience of 13,000 engineering students. It explains the most popular specialist units of the Mechanical Engineering, Manufacturing Engineering and Operations & Maintenance Engineering pathways of the new 2010 BTEC National Engineering syllabus. This challenging textbook also features contributions from specialist lecturers, ensuring that no stone is left unturned.

  16. Generating and using moodle quizzes for mathematical topics in engineering education

    OpenAIRE

    Blanco Abellán, Mónica; Ginovart Gisbert, Marta

    2009-01-01

    This poster focuses on the design, implementation and assessment of a range of Moodle quiz question pools. From these pools, we intend to generate quizzes for the compulsory undergraduate subjects of the applied mathematics field included in the first- and second-year syllabus for all branches of Engineering, following the guidelines of the European higher education area.

  17. Job Prospects for Petroleum Engineers.

    Science.gov (United States)

    Basta, Nicholas

    1988-01-01

    Describes petroleum engineering as one area in industry where job opportunities are few but where the worst of the declines has been seen. Discusses the causes of the decline. Lists several areas where petroleum engineers have found alternatives including environmental projects, water supply projects, and computer applications. (CW)

  18. Building Algebra One Giant Step at a Time: Toward a Reverse-Scaffolding Pedagogical Approach for Fostering Subjective Transparency Through Engineering Levels of Interaction With a Technological Learning Environment

    OpenAIRE

    Chase, Kiera Naomi Phoebe

    2016-01-01

    The project brings together and studies the intersection of three ‘big’ ideas from educational research and practice. Firstly, this project is built on the constructivist assumption that meaningful learning occurs when students interact with educational materials that occasion problem solving and reflection. Secondly, this project elaborates on the theoretical construct of transparency by tracking its subjective development. Finally, the project reexamines the notion of scaffolding – the soci...

  19. Sensibility and Subjectivity: Levinas’ Traumatic Subject

    Directory of Open Access Journals (Sweden)

    Rashmika Pandya

    2011-02-01

    Full Text Available The importance of Levinas’ notions of sensibility and subjectivity are evident in the revision of phenomenological method by current phenomenologists such as Jean-Luc Marion and Michel Henry. The criticisms of key tenants of classical phenomenology, intentionality and reduction, are of a particular note. However, there are problems with Levinas’ characterization of subjectivity as essentially sensible. In “Totality and Infinity” and “Otherwise than Being”, Levinas criticizes and recasts a traditional notion of subjectivity, particularly the notion of the subject as the first and foremost rational subject. The subject in Levinas’ works is characterized more by its sensibility and affectedness than by its capacity to reason or affect its world. Levinas ties rationality to economy and suggests an alternative notion of reason that leads to his analysis of the ethical relation as the face-to-face encounter. The ‘origin’ of the social relation is located not in our capacity to know but rather in a sensibility that is diametrically opposed to the reason understood as economy. I argue that the opposition in Levinas’ thought between reason and sensibility is problematic and essentially leads to a self-conflicted subject. In fact, it would seem that violence characterizes the subject’s self-relation and, thus, is also inscribed at the base of the social relation. Rather than overcoming a problematic tendency to dualistic thought in philosophy Levinas merely reverses traditional hierarchies of reason/emotion, subject/object and self/other. 

  20. Laboratory Evaluation of In Situ Chemical Oxidation for Groundwater Remediation, Test Area North, Operable Unit 1-07B, Idaho National Engineering and Environmental Laboratory, Volume Two, Appendices C, D, and E

    Energy Technology Data Exchange (ETDEWEB)

    Cline, S.R.; Denton, D.L.; Giaquinto, J.M.; McCracken, M.K.; Starr, R.C.

    1999-04-01

    These appendices support the results and discussion of the laboratory work performed to evaluate the feasibility of in situ chemical oxidation for Idaho National Environmental and Engineering Laboratory's (INEEL) Test Area North (TAN) which is contained in ORNL/TM-1371 l/Vol. This volume contains Appendices C-E. Appendix C is a compilation of all recorded data and mathematical calculations made to interpret the data. For the Task 3 and Task 4 work, the spreadsheet column definitions are included immediately before the actual spreadsheet pages and are listed as ''Sample Calculations/Column Definitions'' in the table of contents. Appendix D includes the chronological order in which the experiments were conducted and the final project costs through October 1998. Appendix E is a compilation of the monthly progress reports submitted to INEEL during the course of the project.

  1. Radiochemical and Chemical Constituents in Water from Selected Wells and Springs from the Southern Boundary of the Idaho National Engineering and Environmental Laboratory to the Hagerman Area, Idaho, 1997

    Energy Technology Data Exchange (ETDEWEB)

    R. C. Bartholomay (USGS); L. M. Williams (USGS); L. J. Campbell (Idaho Department of Water Resources)

    1998-12-01

    The U.S. Geological Survey and the Idaho Department of Water Resources, in cooperation with the U.S. Department of Energy, sampled 18 sites as part of the fourth round of a long-term project to monitor water quality of the Snake River Plain aquifer from the southern boundary of the Idaho National Engineering and Environmental Laboratory to the Hagerman area. Water samples were collected and analyzed for selected radiochemical and chemical constituents. The samples were collected from seven domestic wells, six irrigation wells, two springs, one dairy well, one observation well, and one stock well. Two quality-assurance samples also were collected and analyzed. None of the radiochemical or chemical constituents exceeded the established maximum contaminant levels for drinking water. Many of the radionuclide- and inorganic-constituent concentrations were greater than their respective reporting levels.

  2. Radiochemical and Chemical Constituents in Water from Selected Wells and Springs from the Southern Boundary of the Idaho National Engineering and Environmental Laboratory to the Hagerman Area, Idaho, 1998

    Energy Technology Data Exchange (ETDEWEB)

    R. C. Bartholomay; B. V. Twining (USGS); L. J. Campbell (Idaho Department of Water Resources)

    1999-06-01

    The U.S. Geological Survey and the Idaho Department of Water Resources, in cooperation with the U.S. Department of Energy, sampled 18 sites as part of the fourth round of a long-term project to monitor water quality of the Snake River Plain aquifer from the southern boundary of the Idaho National Engineering and Environmental Laboratory to the Hagerman area. The samples were analyzed for selected radiochemical and chemical constituents. The samples were collected from 2 domestic wells, 12 irrigation wells, 2 stock wells, 1 spring, and 1 public supply well. Two quality-assurance samples also were collected and analyzed. None of the reported radiochemical or chemical constituent concentrations exceeded the established maximum contaminant levels for drinking water. Many of the radionuclide- and inorganic-constituent concentrations were greater than the respective reporting levels. Most of the organic-constituent concentrations were less than the reporting levels.

  3. Radionuclides, stable isotopes, inorganic constituents, and organic compounds in water from selected wells and springs from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman Area, Idaho, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Bartholomay, R.C.; Williams, L.M. [Geological Survey, Idaho Falls, ID (United States); Campbell, L.J. [Idaho Dept. of Water Resources, Boise, ID (United States)

    1996-09-01

    The US Geological Survey and the Idaho Department of Water Resources, in cooperation with the US Department of Energy, sampled 17 sites as part of a long-term project to monitor water quality of the Snake River Plain aquifer from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman area. Water samples were collected and analyzed for selected radionuclides, stable isotopes, inorganic constituents, and organic compounds. The samples were collected from 11 irrigation wells, 2 domestic wells, 2 stock wells, 1 spring, and 1 public-supply well. Two quality assurance samples also were collected and analyzed. None of the radionuclide, inorganic constituents, or organic compound concentrations exceeded the established maximum contaminant levels for drinking water. Many of the radionuclide and inorganic constituent concentrations were greater than their respective reporting levels. All samples analyzed for dissolved organic carbon had concentrations that were greater than the minimum reporting level.

  4. Radionuclides, stable isotopes, inorganic constituents, and organic compounds in water from selected wells and springs from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman Area, Idaho, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Bartholomay, R.C.; Williams, L.M. [Geological Survey, Idaho Falls, ID (United States); Campbell, L.J. [Idaho Dept. of Water Resources, Boise, ID (United States)

    1995-10-01

    The US Geological Survey and the Idaho Department of Water Resources, in response to a request from the US Department of Energy, samples 18 sites as part of a long-term project to monitor water quality of the Snake River Plain aquifer from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman area. Water samples were collected and analyzed for selected radionuclides, stable isotopes, inorganic constituents, and organic compounds. The samples were collected from seven irrigation wells, seven domestic wells, two springs, one stock well, and one observation well. Two quality assurance samples also were collected and analyzed. None of the radionuclide, inorganic constituent, or organic compound concentrations exceeded the established maximum contaminant levels for drinking water. Many of the radionuclide and inorganic constituent concentrations exceeded their respective reporting levels. All samples analyzed for dissolved organic carbon had concentrations that exceeded their minimum reporting levels.

  5. The Multi-Scale Mass Transfer Processes Controlling Natural Attenuation and Engineered Remediation: An IFC Focused on Hanford’s 300 Area Uranium Plume Quality Assurance Project Plan

    Energy Technology Data Exchange (ETDEWEB)

    Fix, N. J.

    2008-01-31

    The purpose of the project is to conduct research at an Integrated Field-Scale Research Challenge Site in the Hanford Site 300 Area, CERCLA OU 300-FF-5 (Figure 1), to investigate multi-scale mass transfer processes associated with a subsurface uranium plume impacting both the vadose zone and groundwater. The project will investigate a series of science questions posed for research related to the effect of spatial heterogeneities, the importance of scale, coupled interactions between biogeochemical, hydrologic, and mass transfer processes, and measurements/approaches needed to characterize a mass-transfer dominated system. The research will be conducted by evaluating three (3) different hypotheses focused on multi-scale mass transfer processes in the vadose zone and groundwater, their influence on field-scale U(VI) biogeochemistry and transport, and their implications to natural systems and remediation. The project also includes goals to 1) provide relevant materials and field experimental opportunities for other ERSD researchers and 2) generate a lasting, accessible, and high-quality field experimental database that can be used by the scientific community for testing and validation of new conceptual and numerical models of subsurface reactive transport.

  6. MPLS for metropolitan area networks

    CERN Document Server

    Tan, Nam-Kee

    2004-01-01

    METROPOLITAN AREA NETWORKS AND MPLSRequirements of Metropolitan Area Network ServicesMetropolitan Area Network OverviewThe Bandwidth DemandThe Metro Service Provider's Business ApproachesThe Emerging Metro Customer Expectations and NeedsSome Prevailing Metro Service OpportunitiesService Aspects and RequirementsRoles of MPLS in Metropolitan Area NetworksMPLS PrimerMPLS ApplicationsTRAFFIC ENGINEERING ASPECTS OF METROPOLITAN AREA NETWORKSTraffic Engineering ConceptsNetwork CongestionHyper Aggregation ProblemEasing CongestionNetwork ControlTactical versus Strategic Traffic EngineeringIP/ATM Overl

  7. Internal Combustion Engine Principles with Vehicle Applications

    DEFF Research Database (Denmark)

    Sorenson, Spencer C

    The book is an introductory text on the subject of internal combustion engines, intended for use in engineering courses at the senior or introductory graduate student level. The focus in on describing the basic principles of engine operation on a broad basis, to provide a foundation for further...... exchange processes, combustion in different engine types, exhaust emissions, engine control including mean value engine models, pressure charging, fuels and fuel systems, balancing, friction, and heat transfer. In addition, methods to establish the connection between engine characteristics and vehicle...... study, research and development. The goal is to describe the main variables involved in engine operation of different engine types, and how their interaction determines engine performance. Topics included are: general engine parameters, thermodynamic cycles including simple engine simulation, air...

  8. The Societal Nature of Subjectivity

    DEFF Research Database (Denmark)

    Olesen, Henning Salling

    2013-01-01

    The HSR Focus presents a psycho-societal approach to qualitative empirical research in several areas of everyday social life. It is an approach which integrates a theory of subjectivity and an interpretation methodology which integrates hermeneutic experiences from text analysis and psychoanalysis...

  9. Multi-Scale Mass Transfer Processes Controlling Natural Attenuation and Engineered Remediation: An IFRC Focused on Hanford’s 300 Area Uranium Plume January 2011 to January 2012

    Energy Technology Data Exchange (ETDEWEB)

    Zachara, John M.; Bjornstad, Bruce N.; Christensen, John N.; Conrad, Mark S.; Fredrickson, Jim K.; Freshley, Mark D.; Haggerty, Roy; Hammond, Glenn E.; Kent, Douglas B.; Konopka, Allan; Lichtner, Peter C.; Liu, Chongxuan; McKinley, James P.; Murray, Christopher J.; Rockhold, Mark L.; Rubin, Yoram; Vermeul, Vincent R.; Versteeg, Roelof J.; Zheng, Chunmiao

    2012-03-05

    The Integrated Field Research Challenge (IFRC) at the Hanford Site 300 Area uranium (U) plume addresses multi-scale mass transfer processes in a complex subsurface biogeochemical setting where groundwater and riverwater interact. A series of forefront science questions on reactive mass transfer motivates research. These questions relate to the effect of spatial heterogeneities; the importance of scale; coupled interactions between biogeochemical, hydrologic, and mass transfer processes; and measurements and approaches needed to characterize and model a mass-transfer dominated biogeochemical system. The project was initiated in February 2007, with CY 2007, CY 2008, CY 2009, and CY 2010 progress summarized in preceding reports. A project peer review was held in March 2010, and the IFRC project acted upon all suggestions and recommendations made in consequence by reviewers and SBR/DOE. These responses have included the development of 'Modeling' and 'Well-Field Mitigation' plans that are now posted on the Hanford IFRC web-site, and modifications to the IFRC well-field completed in CY 2011. The site has 35 instrumented wells, and an extensive monitoring system. It includes a deep borehole for microbiologic and biogeochemical research that sampled the entire thickness of the unconfined 300 A aquifer. Significant, impactful progress has been made in CY 2011 including: (i) well modifications to eliminate well-bore flows, (ii) hydrologic testing of the modified well-field and upper aquifer, (iii) geophysical monitoring of winter precipitation infiltration through the U-contaminated vadose zone and spring river water intrusion to the IFRC, (iv) injection experimentation to probe the lower vadose zone and to evaluate the transport behavior of high U concentrations, (v) extended passive monitoring during the period of water table rise and fall, and (vi) collaborative down-hole experimentation with the PNNL SFA on the biogeochemistry of the 300 A Hanford

  10. Multi-Scale Mass Transfer Processes Controlling Natural Attenuation and Engineered Remediation: An IFRC Focused on Hanford’s 300 Area Uranium Plume January 2010 to January 2011

    Energy Technology Data Exchange (ETDEWEB)

    Zachara, John M.; Bjornstad, Bruce N.; Christensen, John N.; Conrad, Mark S.; Fredrickson, Jim K.; Freshley, Mark D.; Haggerty, Roy; Hammond, Glenn E.; Kent, Douglas B.; Konopka, Allan; Lichtner, Peter C.; Liu, Chongxuan; McKinley, James P.; Murray, Christopher J.; Rockhold, Mark L.; Rubin, Yoram; Vermeul, Vincent R.; Versteeg, Roelof J.; Ward, Anderson L.; Zheng, Chunmiao

    2011-02-01

    The Integrated Field Research Challenge (IFRC) at the Hanford Site 300 Area uranium (U) plume addresses multi-scale mass transfer processes in a complex subsurface hydrogeologic setting where groundwater and riverwater interact. A series of forefront science questions on reactive mass transfer focus research. These questions relate to the effect of spatial heterogeneities; the importance of scale; coupled interactions between biogeochemical, hydrologic, and mass transfer processes; and measurements and approaches needed to characterize and model a mass-transfer dominated system. The project was initiated in February 2007, with CY 2007, CY 2008, and CY 2009 progress summarized in preceding reports. A project peer review was held in March 2010, and the IFRC project has responded to all suggestions and recommendations made in consequence by reviewers and SBR/DOE. These responses have included the development of “Modeling” and “Well-Field Mitigation” plans that are now posted on the Hanford IFRC web-site. The site has 35 instrumented wells, and an extensive monitoring system. It includes a deep borehole for microbiologic and biogeochemical research that sampled the entire thickness of the unconfined 300 A aquifer. Significant, impactful progress has been made in CY 2010 including the quantification of well-bore flows in the fully screened wells and the testing of means to mitigate them; the development of site geostatistical models of hydrologic and geochemical properties including the distribution of U; developing and parameterizing a reactive transport model of the smear zone that supplies contaminant U to the groundwater plume; performance of a second passive experiment of the spring water table rise and fall event with a associated multi-point tracer test; performance of downhole biogeochemical experiments where colonization substrates and discrete water and gas samplers were deployed to the lower aquifer zone; and modeling of past injection experiments for

  11. Quality assurance for measurements of the radioactivity in the area of the"Horia Hulubei" National Institute for Physics and Nuclear Engineering, IFIN-HH.

    Science.gov (United States)

    Stochioiu, Ana; Luca, Aurelian; Sahagia, Maria; Margineanu, Romul Mircea; Tudor, Ion

    2012-10-01

    This paper presents one part of the activities deployed by the Laboratory for Environment and Personnel Dosimetry (LDPM) of IFIN-HH, namely the radiological monitoring of the environment within the Institute's area and its surrounding influence zone, according to the program approved by the National Regulatory Body for Nuclear Activities, CNCAN. The representative reports regard the radioactive content of soil, surface and underground water, cultivated and spontaneous vegetation, aerosols and atmospheric fallout, sediments. The common requirement is that the measured quantities be precise and the reported values be reliable and credible. This goal is achieved by maintaining a Quality System, verified within the obtaining and maintaining of the laboratory accreditation, according to the international standard ISO/IEC 17025:2005.The LDPM is accredited by the Romanian accreditation body, RENAR, member of the European Accreditation, EA and is designed by CNCAN as a notified testing laboratory. Many measurements were performed in collaboration with the Radionuclide Metrology Laboratory (RML) from IFIN-HH, RENAR accredited and CNCAN notified for calibration and for testing in the field of radioactivity measurement. This paper proposes a short presentation of the important aspects in our activity: i. description of equipment, samplingmethods, processing and measurement of environmental samples; ii. validation of equipment and methods by participation in international and national proficiency tests; iii. a five year follow chart, containing the results in measurement of samples; iv. a recent application, with a wide impact in Romanian mass media: the credible daily report on the possible influence of Fukushima accident over the Romanian environmental radioactivity. Copyright © 2012 Elsevier Ltd. All rights reserved.

  12. Solar energy engineering processes and systems

    CERN Document Server

    Kalogirou, Soteris A

    2009-01-01

    As perhaps the most promising of all the renewable energy sources available today, solar energy is becoming increasingly important in the drive to achieve energy independence and climate balance. This new book is the masterwork from world-renowned expert Dr. Soteris Kalogirou, who has championed solar energy for decades. The book includes all areas of solar energy engineering, from the fundamentals to the highest level of current research. The author includes pivotal subjects such as solar collectors, solar water heating, solar space heating and cooling, industrial process heat, solar desalina

  13. Solar energy engineering processes and systems

    CERN Document Server

    Kalogirou, Soteris A

    2013-01-01

    As perhaps the most promising of all the renewable energy sources available today, solar energy is becoming increasingly important in the drive to achieve energy independence and climate balance. This new book is the masterwork from world-renowned expert Dr. Soteris Kalogirou, who has championed solar energy for decades. The book includes all areas of solar energy engineering, from the fundamentals to the highest level of current research. The author includes pivotal subjects such as solar collectors, solar water heating, solar space heating and cooling, industrial process heat, solar desalina

  14. Advanced Engineering Methods in Design and Education

    Science.gov (United States)

    Kamenov, Krasimir; Dobreva, Antoaneta; Ronkova, Vyarka

    2017-10-01

    The paper presented deals with the challenges occurring during the education of the new digital generation of students in the area of engineering subjects. This new situation in teaching technologies imposes the obtaining of appropriate feedback from the students during the lectures and tutorials. The objective of the research is to investigate the impact of the application of video games, graphical presentations, animations, etc. The feedback received in such interactive way gives the opportunity to improve the teaching models and to increase the active participation of the students during the lectures and tutorials.

  15. Teaching Mathematics to Civil Engineers

    Science.gov (United States)

    Sharp, J. J.; Moore, E.

    1977-01-01

    This paper outlines a technique for teaching a rigorous course in calculus and differential equations which stresses applicability of the mathematics to problems in civil engineering. The method involves integration of subject matter and team teaching. (SD)

  16. Industrial Engineering Education: A Prospective.

    Science.gov (United States)

    Elsayed, E. A.

    1999-01-01

    Presents an overview of the origin of the industrial engineering discipline and how the subject was taught in the early stages of its development. Describes current changes in the curricula to meet new requirements in industry. (Author/CCM)

  17. Web Search Engines

    OpenAIRE

    Rajashekar, TB

    1998-01-01

    The World Wide Web is emerging as an all-in-one information source. Tools for searching Web-based information include search engines, subject directories and meta search tools. We take a look at key features of these tools and suggest practical hints for effective Web searching.

  18. Metabolic Engineering VII Conference

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Korpics

    2012-12-04

    The aims of this Metabolic Engineering conference are to provide a forum for academic and industrial researchers in the field; to bring together the different scientific disciplines that contribute to the design, analysis and optimization of metabolic pathways; and to explore the role of Metabolic Engineering in the areas of health and sustainability. Presentations, both written and oral, panel discussions, and workshops will focus on both applications and techniques used for pathway engineering. Various applications including bioenergy, industrial chemicals and materials, drug targets, health, agriculture, and nutrition will be discussed. Workshops focused on technology development for mathematical and experimental techniques important for metabolic engineering applications will be held for more in depth discussion. This 2008 meeting will celebrate our conference tradition of high quality and relevance to both industrial and academic participants, with topics ranging from the frontiers of fundamental science to the practical aspects of metabolic engineering.

  19. Information Engineering and Applications

    CERN Document Server

    Ma, Yan; International Conference on Information Engineering and Applications (IEA) 2011

    2012-01-01

    The International Conference on Information Engineering and Applications (IEA) 2011 will be held on October 21-24, 2011, in Chongqing, China. It is organized by Chongqing Normal University, Chongqing University, Shanghai Jiao Tong University, Nanyang Technological University, the University of Michigan, Chongqing University of Arts and Sciences, and sponsored by the National Natural Science Foundation of China. The objective of IEA 2011 is to facilitate an exchange of information on best practices for the latest research advances in the area of information engineering and intelligence applications, which mainly includes computer science and engineering, informatics, communications and control, electrical engineering, information computing, business intelligence and management. IEA 2011 will provide a forum for engineers and scientists in academia, industry, and government to address the most innovative research and development including technical challenges, social and economic issues, and to present and disc...

  20. Crystal engineering: A brief overview

    Indian Academy of Sciences (India)

    The possibility of designing a particular crystal packing is, however, of more recent origin and the subject of crystal engineering has addressed this possibility, more or less systematically, during the past 30 years. Crystal engineering demands a detailed and thorough knowledge of intermolecular interactions, which act as ...

  1. Aplicación de la tecnología BIM en la asignatura de proyecto del Grado de Ingeniería Industrial en la UNEX = Application of BIM technology in the project subject of the industrial engineering degree in UNEX

    Directory of Open Access Journals (Sweden)

    Antonio M. Reyes

    2017-04-01

    asignatura. Cuáles han sido los aspectos que ha mejorado y cuáles son los que se podrían mejorar. Abstract Many studies indicate that the need for professionals with BIM skills is undergoing a fast growth. This growth is giving rise to problems in the implementation of BIM in the sector: the main one is the lack of training of technicians in this area. The current university education is based on the acquisition of skills by students. In line with the requirements of the European Higher Education Area which calls competencies the skills to be acquired by the student. In this paper, the teaching experience of the implementation of BIM technology in the project subject is going to be explained. This subject is compulsory for the three disciplines of the Industrial Engineering Degree. The objective is to deduce if the teaching use of the BIM technology facilitates the acquisition of knowledge and improves the understanding of the subject. BIM education should focus on the development of basic knowledge, skills and attitudes of students. In addition, it is necessary to emphasize the need for construction industry technicians to have skills such as collaboration, communication, leadership and change management, along with technical skills related to BIM. The academic world plays an important role in transforming the industry driven by BIM. While government agencies and the private sector use BIM for new construction, university programs have been much slower in incorporating this technology. Universities are staying behind the construction industry in terms of adopting BIM technology in student training. Actually, the benefits and difficulties that has meant the implementation of BIM technology in the development of the subject is evaluated in this work: which aspects have improved and which aspects could be improved.

  2. Holistic Education: The Social Reality of Engineering

    Directory of Open Access Journals (Sweden)

    HELENA TRBUŠIĆ

    2013-12-01

    Full Text Available Over the last few decades, scientists exploring the aspects of engineering education and investigating the strong connection between the engineering profession and society have argued for a more rounded, holistic approach to the engineering curriculum. In addition to fundamental technical subjects, they have proposed the inclusion of a broad range of social subjects in order to equip young engineers with social and communication skills relevant for teamwork, and to enhance their awareness about both the way social changes influence the implementation of certain engineering solutions and about the way developments in engineering have a considerable impact on society in general. This paper presents the results of a two-year qualitative study of the importance of social subjects within the engineering academic curriculum at the Faculty of Mechanical Engineering and Naval Architecture in Zagreb, Croatia.

  3. Practical knowledge engineering

    CERN Document Server

    Kelly, Richard

    1991-01-01

    This book provides knowledge engineers with practical methods for initiating, designing, building, managing, and demonstrating successful commercial expert systems. It is a record of what actually works (and does not work) in the construction of expert systems, drawn from the author's decade of experience in building expert systems in all major areas of application for American, European, and Japanese organizations.The book features:* knowledge engineering programming techniques* useful skills for demonstrating expert systems * practical costing and metrics* guidelines for using knowledge repr

  4. Biochemical Engineering.

    Science.gov (United States)

    Dunnill, P.

    1979-01-01

    Biochemical engineering as a scientific discipline is becoming accepted in England and is drawing many young men and women to its ranks. This article focuses on how engineering came to embrace the biological sciences. (Author/SA)

  5. Engineering _ litteraturliste

    DEFF Research Database (Denmark)

    Sillasen, Martin Krabbe; Daugbjerg, Peer; Nielsen, Keld

    2017-01-01

    Litteraturliste udarbejdet som grundlag for artiklen ”Engineering – svaret på naturfagenes udfordringer?”......Litteraturliste udarbejdet som grundlag for artiklen ”Engineering – svaret på naturfagenes udfordringer?”...

  6. Governing Engineering

    DEFF Research Database (Denmark)

    Buch, Anders

    2011-01-01

    Abstract: Most people agree that our world faces daunting problems and, correctly or not, technological solutions are seen as an integral part of an overall solution. But what exactly are the problems and how does the engineering ‘mind set’ frame these problems? This chapter sets out to unravel...... dominant perspectives in challenge perception in engineering in the US and Denmark. Challenge perception and response strategies are closely linked through discursive practices. Challenge perceptions within the engineering community and the surrounding society are thus critical for the shaping...... of engineering education and the engineering profession. Through an analysis of influential reports and position papers on engineering and engineering education the chapter sets out to identify how engineering is problematized and eventually governed. Drawing on insights from governmentality studies the chapter...

  7. Governing Engineering

    DEFF Research Database (Denmark)

    Buch, Anders

    2012-01-01

    Most people agree that our world face daunting problems and, correctly or not, technological solutions are seen as an integral part of an overall solution. But what exactly are the problems and how does the engineering ‘mind set’ frame these problems? This chapter sets out to unravel dominant...... perspectives in challenge per-ception in engineering in the US and Denmark. Challenge perception and response strategies are closely linked through discursive practices. Challenge perceptions within the engineering community and the surrounding society are thus critical for the shaping of engineering education...... and the engineering profession. Through an analysis of influential reports and position papers on engineering and engineering education the chapter sets out to identify how engineering is problematized and eventually governed. Drawing on insights from governmentality studies the chapter strives to elicit the bodies...

  8. Engineering Cartilage

    Science.gov (United States)

    ... Research Matters NIH Research Matters March 3, 2014 Engineering Cartilage Artistic rendering of human stem cells on ... situations has been a major goal in tissue engineering. Cartilage contains water, collagen, proteoglycans, and chondrocytes. Collagens ...

  9. Industrial Engineering

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally).......Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally)....

  10. Expose Mechanical Engineering Students to Biomechanics Topics

    Science.gov (United States)

    Shen, Hui

    2011-01-01

    To adapt the focus of engineering education to emerging new industries and technologies nationwide and in the local area, a biomechanics module has been developed and incorporated into a mechanical engineering technical elective course to expose mechanical engineering students at ONU (Ohio Northern University) to the biomedical engineering topics.…

  11. 14 CFR 21.128 - Tests: aircraft engines.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Tests: aircraft engines. 21.128 Section 21... engines. (a) Each person manufacturing aircraft engines under a type certificate only shall subject each engine (except rocket engines for which the manufacturer must establish a sampling technique) to an...

  12. Engineering Motion

    Science.gov (United States)

    Tuttle, Nicole; Stanley, Wendy; Bieniek, Tracy

    2016-01-01

    For many teachers, engineering can be intimidating; teachers receive little training in engineering, particularly those teaching early elementary students. In addition, the necessity of differentiating for students with special needs can make engineering more challenging to teach. This article describes a professional development program…

  13. Modern mechanical engineering research, development and education

    CERN Document Server

    2014-01-01

    This book covers modern subjects of mechanical engineering such as nanomechanics and nanotechnology, mechatronics and robotics, computational mechanics, biomechanics, alternative energies, sustainability as well as all aspects related with mechanical engineering education. The chapters help enhance the understanding of both the fundamentals of mechanical engineering and its application to the solution of problems in modern industry. This book is suitable for students, both in final undergraduate mechanical engineering courses or at the graduate level. It also serves as a useful reference for academics, mechanical engineering researchers, mechanical, materials and manufacturing engineers, professionals in related with mechanical engineering.

  14. 9th Structural Engineering Convention 2014

    CERN Document Server

    2015-01-01

    The book presents research papers presented by academicians, researchers, and practicing structural engineers from India and abroad in the recently held Structural Engineering Convention (SEC) 2014 at Indian Institute of Technology Delhi during 22 – 24 December 2014. The book is divided into three volumes and encompasses multidisciplinary areas within structural engineering, such as earthquake engineering and structural dynamics, structural mechanics, finite element methods, structural vibration control, advanced cementitious and composite materials, bridge engineering, and soil-structure interaction. Advances in Structural Engineering is a useful reference material for structural engineering fraternity including undergraduate and postgraduate students, academicians, researchers and practicing engineers.

  15. Computational engineering

    CERN Document Server

    2014-01-01

    The book presents state-of-the-art works in computational engineering. Focus is on mathematical modeling, numerical simulation, experimental validation and visualization in engineering sciences. In particular, the following topics are presented: constitutive models and their implementation into finite element codes, numerical models in nonlinear elasto-dynamics including seismic excitations, multiphase models in structural engineering and multiscale models of materials systems, sensitivity and reliability analysis of engineering structures, the application of scientific computing in urban water management and hydraulic engineering, and the application of genetic algorithms for the registration of laser scanner point clouds.

  16. A chemometric investigation of aromatic emission profiles from a marine engine in comparison with residential wood combustion and road traffic: Implications for source apportionment inside and outside sulphur emission control areas

    Science.gov (United States)

    Czech, Hendryk; Stengel, Benjamin; Adam, Thomas; Sklorz, Martin; Streibel, Thorsten; Zimmermann, Ralf

    2017-10-01

    Ship emissions are known to cause severe impacts on human health, but are less restricted than land-based emissions. A regulation to improve air quality in coastal regions and frequented waterways is the limitation of fuel sulphur content to 0.1% in sulphur emission control areas (SECAs), which has caused a switch from heavy fuel oil (HFO) towards diesel-like marine gas oil (MGO) or marine diesel oil (MDO). The fraction of aromatic organic vapours in the exhaust from a marine engine, operating on HFO and MGO, was investigated by resonance-enhanced multi-photon ionisation time-of-flight mass spectrometry (REMPI-TOFMS). MGO with fuel sulphur content (FSC) below 0.1% and HFO with an average FSC of 2.7% denote representative marine fuels inside and outside SECAs, respectively. The obtained emission spectra were combined with data of previous REMPI-TOFMS studies of combustion engines and wood combustion in statistical analyses to derive marker substances for ship emissions inside and outside SECAs. A diagnostic ratio of C2-naphthalenes to methyl-naphthalenes was found to hold for a good discriminator between ship emissions on the one hand and road traffic and wood combustion on the other hand. Furthermore, random REMPI spectra from all emission sources were mixed with different proportions in a simulation to create a model based on partial least square (PLS) regression for the prediction of ship contribution to aromatic organic vapours. We point out that in particular PAHs with higher degree of alkylation are significant markers for primary ship emissions which may support source apportionment studies inside and outside SECAs to assess the benefits of fuel sulphur content regulation on air quality.

  17. Estimation of the fluctuating water surface area of the Three Gorges Reservoir in China[Includes the CSCE forum on professional practice and career development : 1. international engineering mechanics and materials specialty conference : 1. international/3. coastal, estuarine and offshore engineering specialty conference : 2. international/8. construction specialty conference

    Energy Technology Data Exchange (ETDEWEB)

    Lu, H.R. [Concordia Univ., Montreal, PQ (Canada). Dept. of Building, Civil and Environmental Engineering; Chongqing Pharmaceutical Industry Designing Inst., Chongqing (China); Li, S.S. [Concordia Univ., Montreal, PQ (Canada). Dept. of Building, Civil and Environmental Engineering

    2009-07-01

    The Three Gorges Reservoir (TGR) in China is the largest river-type reservoir in the world. This paper presented a simple methodology to assess the reservoir project impacts. In particular, it determined the variations in the submersion of the TGR's water storage on an annual discharge-storage cycle. A good understanding of the variations is important to investigate channel morphology, sediment transport, ecological changes, geological hazards and relocation of local residents. The surface area of the TGR was calculated from output of HEC-RAS, a 1-D hydrodynamics model developed by the United States Army Corps of Engineers. Mass transfer-based methods were used to estimate evaporation, which required wind and vapour pressure as input. The flow velocities and water levels in the TGR were numerically predicted. The predictions of cross-sectional mean flow velocities and the slope of the water surface were in good agreement with field data. The calibrated model was then run for the design water levels and inflows for each month of the year. The total area of the water surface that fluctuates in time was calculated from model results. The amount of water evaporation loss from the water surface was estimated using the calculated area and climatologic statistics of water and air temperatures, humidity and winds. 15 refs., 1 tab., 8 figs.

  18. Architectural Engineers

    DEFF Research Database (Denmark)

    Petersen, Rikke Premer

    engineering is addresses from two perspectives – as an educational response and an occupational constellation. Architecture and engineering are two of the traditional design professions and they frequently meet in the occupational setting, but at educational institutions they remain largely estranged....... The paper builds on a multi-sited study of an architectural engineering program at the Technical University of Denmark and an architectural engineering team within an international engineering consultancy based on Denmark. They are both responding to new tendencies within the building industry where...... the role of engineers and architects increasingly overlap during the design process, but their approaches reflect different perceptions of the consequences. The paper discusses some of the challenges that design education, not only within engineering, is facing today: young designers must be equipped...

  19. International Energy: Subject Thesaurus

    Energy Technology Data Exchange (ETDEWEB)

    Raridon, M.H. (ed.)

    1990-01-01

    The International Energy Subject Thesaurus contains the standard vocabulary to indexing terms (descriptors) developed and structured to build and maintain energy information databases. Involved in this cooperative task are (1) the technical staff of the USDOE Office of Scientific and Technical Information (OSTI) in cooperation with the member countries of the Energy Technology Data Exchange (ETDE) and (2) the International Nuclear Information System (INIS) staff representing the more than ninety countries and organizations recording and indexing information for the international nuclear information community. ETDE member countries are also members of the International Nuclear Information System (INIS). Nuclear information indexed and recorded for INIS by these ETDE member countries is also included in the ETDE Energy Data Base, and indexing terminology is therefore cooperatively standardized for use in both information systems. This structured vocabulary reflects the scope of international energy research, development, and technological programs and encompasses terminology derived not only from the basic sciences but also from the areas of energy resources, conservation, safety, environmental impact, and regulation.

  20. The GRE Subject Test in Psychology.

    Science.gov (United States)

    Pedrini, D. T.; Pedrini, B. C.

    Specific and detailed instructions to implement an environmental engineering approach to the Graduate Record Examination (GRE) Subject Test for Psychology are outlined. Focus is on helping students prepare for this test. Some universities use the GRE as a measure of achievement and aptitude and as a criterion test. In truth, such a test does not…

  1. Biopharmaceutics and therapeutic potential of engineered nanomaterials.

    Science.gov (United States)

    Liang, Xing-Jie; Chen, Chunying; Zhao, Yuliang; Jia, Lee; Wang, Paul C

    2008-10-01

    Engineered nanomaterials are at the leading edge of the rapidly developing nanosciences and are founding an important class of new materials with specific physicochemical properties different from bulk materials with the same compositions. The potential for nanomaterials is rapidly expanding with novel applications constantly being explored in different areas. The unique size-dependent properties of nanomaterials make them very attractive for pharmaceutical applications. Investigations of physical, chemical and biological properties of engineered nanomaterials have yielded valuable information. Cytotoxic effects of certain engineered nanomaterials towards malignant cells form the basis for one aspect of nanomedicine. It is inferred that size, three dimensional shape, hydrophobicity and electronic configurations make them an appealing subject in medicinal chemistry. Their unique structure coupled with immense scope for derivatization forms a base for exciting developments in therapeutics. This review article addresses the fate of absorption, distribution, metabolism and excretion (ADME) of engineered nanoparticles in vitro and in vivo. It updates the distinctive methodology used for studying the biopharmaceutics of nanoparticles. This review addresses the future potential and safety concerns and genotoxicity of nanoparticle formulations in general. It particularly emphasizes the effects of nanoparticles on metabolic enzymes as well as the parenteral or inhalation administration routes of nanoparticle formulations. This paper illustrates the potential of nanomedicine by discussing biopharmaceutics of fullerene derivatives and their suitability for diagnostic and therapeutic purposes. Future direction is discussed as well.

  2. A subjective scheduler for subjective dedicated networks

    Science.gov (United States)

    Suherman; Fakhrizal, Said Reza; Al-Akaidi, Marwan

    2017-09-01

    Multiple access technique is one of important techniques within medium access layer in TCP/IP protocol stack. Each network technology implements the selected access method. Priority can be implemented in those methods to differentiate services. Some internet networks are dedicated for specific purpose. Education browsing or tutorial video accesses are preferred in a library hotspot, while entertainment and sport contents could be subjects of limitation. Current solution may use IP address filter or access list. This paper proposes subjective properties of users or applications are used for priority determination in multiple access techniques. The NS-2 simulator is employed to evaluate the method. A video surveillance network using WiMAX is chosen as the object. Subjective priority is implemented on WiMAX scheduler based on traffic properties. Three different traffic sources from monitoring video: palace, park, and market are evaluated. The proposed subjective scheduler prioritizes palace monitoring video that results better quality, xx dB than the later monitoring spots.

  3. System dynamics for mechanical engineers

    CERN Document Server

    Davies, Matthew

    2015-01-01

    This textbook is ideal for mechanical engineering students preparing to enter the workforce during a time of rapidly accelerating technology, where they will be challenged to join interdisciplinary teams. It explains system dynamics using analogies familiar to the mechanical engineer while introducing new content in an intuitive fashion. The fundamentals provided in this book prepare the mechanical engineer to adapt to continuous technological advances with topics outside traditional mechanical engineering curricula by preparing them to apply basic principles and established approaches to new problems. This book also: ·         Reinforces the connection between the subject matter and engineering reality ·         Includes an instructor pack with the online publication that describes in-class experiments with minimal preparation requirements ·         Provides content dedicated to the modeling of modern interdisciplinary technological subjects, including opto-mechanical systems, high...

  4. International evaluation of the programme on engine-related combustion

    Energy Technology Data Exchange (ETDEWEB)

    Arcoumanis, D. [Imperial College, London (United Kingdom); Greenhalgh, D. [Cranfield Univ. (United Kingdom); Magnusson, B.F. [Norwegian Univ. of Science and Technology, Trondheim (Norway); Peters, N. [Institut fuer Technische Mechanik, RWTH Aachen (Germany)

    1996-11-01

    The 12 projects in the engine related combustion programme cover the entire range from fundamental and theoretical aspects of combustion to more applied subjects such as engine control. The common denominator in the programme clearly is the internal combustion engine, both the reciprocating as well as the gas turbine engine. Such a large coverage by a relatively small number of projects necessarily leads to an isolation of some of the projects in terms of their subject as well as the methodology that is used. On the other hand, all the research areas of interest in combustion technology are represented by at least one of the projects. These are: mathematical and numerical methods in combustion; modelling of turbulent combustion; laser diagnostics of flows with combustion; studies of engine performance and their control; semi-empirical model development for practical applications. As a conclusion, the evaluation committee believes that the programme is well balanced between fundamental and applied projects. It covers the entire range of modern methodologies that are used on the international level and thereby contributes to the application and further development of these research tools in Sweden

  5. Energy data base: subject thesaurus

    Energy Technology Data Exchange (ETDEWEB)

    Redford, J.S. (ed.)

    1981-10-01

    The technical staff of the DOE Technical Information Center, during its subject indexing activities, develops and structures a vocabulary that allows consistent machine storage and retrieval of information necessary to the accomplishment of the DOE mission. This thesaurus incorporates that structured vocabulary. The terminology of this thesaurus is used for the subject control of information announced in DOE Energy Research Abstracts, Energy Abstracts for Policy Analysis, and various update journals and bulletins in specialized areas. This terminology also facilitates subject searching of the DOE Energy Data Base on the DOE/RECON on-line retrieval system and on other commercial retrieval systems. The rapid expansion of the DOE's activities will result in a commitant thesaurus expansion as information relating to new activities is indexed. Only the terms used in the indexing of documents at the Technical Information Center to date are included. (JSR)

  6. Electrical engineer's reference book

    CERN Document Server

    Jones, G R

    2013-01-01

    A long established reference book: radical revision for the fifteenth edition includes complete rearrangement to take in chapters on new topics and regroup the subjects covered for easy access to information.The Electrical Engineer's Reference Book, first published in 1945, maintains its original aims: to reflect the state of the art in electrical science and technology and cater for the needs of practising engineers. Most chapters have been revised and many augmented so as to deal properly with both fundamental developments and new technology and applications that have come to the fore since

  7. Annotated research bibliography for geothermal reservoir engineering

    Energy Technology Data Exchange (ETDEWEB)

    Sudol, G.A.; Harrison, R.F.; Ramey, H.J. Jr.

    1979-08-01

    This bibliography is divided into the following subject areas: formation evaluation, modeling, exploitation strategies, and interpretation of production trends. A subject/author index is included. (MHR)

  8. Invisible Engineers

    Science.gov (United States)

    Ohashi, Hideo

    Questionnaire to ask “mention three names of scientists you know” and “three names of engineers you know” was conducted and the answers from 140 adults were analyzed. The results indicated that the image of scientists is represented by Nobel laureates and that of engineers by great inventors like Thomas Edison and industry founders like Soichiro Honda. In order to reveal the image of engineers among young generation, questionnaire was conducted for pupils in middle and high schools. Answers from 1,230 pupils were analyzed and 226 names mentioned as engineers were classified. White votes reached 60%. Engineers who are neither big inventors nor company founders collected less than 1% of named votes. Engineers are astonishingly invisible from young generation. Countermeasures are proposed.

  9. Engineering mechanics

    CERN Document Server

    Gross, Dietmar; Schröder, Jörg; Wall, Wolfgang A; Rajapakse, Nimal

    Statics is the first volume of a three-volume textbook on Engineering Mechanics. The authors, using a time-honoured straightforward and flexible approach, present the basic concepts and principles of mechanics in the clearest and simplest form possible to advanced undergraduate engineering students of various disciplines and different educational backgrounds. An important objective of this book is to develop problem solving skills in a systematic manner. Another aim of this volume is to provide engineering students as well as practising engineers with a solid foundation to help them bridge the gap between undergraduate studies on the one hand and advanced courses on mechanics and/or practical engineering problems on the other. The book contains numerous examples, along with their complete solutions. Emphasis is placed upon student participation in problem solving. The contents of the book correspond to the topics normally covered in courses on basic engineering mechanics at universities and colleges. Now in i...

  10. Pistons and engine testing

    CERN Document Server

    2016-01-01

    The ever-increasing demands placed on combustion engines are just as great when it comes to this centerpiece—the piston. Achieving less weight or friction, or even greater wear resistance, requires in-depth knowledge of the processes taking place inside the engine, suitable materials, and appropriate design and manufacturing processes for pistons, including the necessary testing measures. It is no longer possible for professionals in automotive engineering to manage without specific expertise of this kind, whether they work in the field of design, development, testing, or maintenance. This technical book answers these questions in detail and in a very clear and comprehensible way. In this second, revised edition, every chapter has been revised and expanded. The chapter on “Engine testing”, for example, now include extensive results in the area of friction power loss measurement and lube oil consumption measurement. Contents Piston function, requirements, and types Design guidelines Simulation of the ope...

  11. Review of the transport of selected radionuclides in the interim risk assessment for the Radioactive Waste Management Complex, Waste Area Group 7 Operable Unit 7-13/14, Idaho National Engineering and Environmental Laboratory, Idaho

    Science.gov (United States)

    Rousseau, Joseph P.; Landa, Edward R.; Nimmo, John R.; Cecil, L. DeWayne; Knobel, LeRoy L.; Glynn, Pierre D.; Kwicklis, Edward M.; Curtis, Gary P.; Stollenwerk, Kenneth G.; Anderson, Steven R.; Bartholomay, Roy C.; Bossong, Clifford R.; Orr, Brennon R.

    2005-01-01

    The U.S. Department of Energy (DOE) requested that the U.S. Geological Survey conduct an independent technical review of the Interim Risk Assessment (IRA) and Contaminant Screening for the Waste Area Group 7 (WAG-7) Remedial Investigation, the draft Addendum to the Work Plan for Operable Unit 7-13/14 WAG-7 comprehensive Remedial Investigation and Feasibility Study (RI/FS), and supporting documents that were prepared by Lockheed Martin Idaho Technologies, Inc. The purpose of the technical review was to assess the data and geotechnical approaches that were used to estimate future risks associated with the release of the actinides americium, uranium, neptunium, and plutonium to the Snake River Plain aquifer from wastes buried in pits and trenches at the Subsurface Disposal Area (SDA). The SDA is located at the Radioactive Waste Management Complex in southeastern Idaho within the boundaries of the Idaho National Engineering and Environmental Laboratory. Radionuclides have been buried in pits and trenches at the SDA since 1957 and 1952, respectively. Burial of transuranic wastes was discontinued in 1982. The five specific tasks associated with this review were defined in a ?Proposed Scope of Work? prepared by the DOE, and a follow-up workshop held in June 1998. The specific tasks were (1) to review the radionuclide sampling data to determine how reliable and significant are the reported radionuclide detections and how reliable is the ongoing sampling program, (2) to assess the physical and chemical processes that logically can be invoked to explain true detections, (3) to determine if distribution coefficients that were used in the IRA are reliable and if they have been applied properly, (4) to determine if transport model predictions are technically sound, and (5) to identify issues needing resolution to determine technical adequacy of the risk assessment analysis, and what additional work is required to resolve those issues.

  12. Software engineering

    CERN Document Server

    Sommerville, Ian

    2010-01-01

    The ninth edition of Software Engineering presents a broad perspective of software engineering, focusing on the processes and techniques fundamental to the creation of reliable, software systems. Increased coverage of agile methods and software reuse, along with coverage of 'traditional' plan-driven software engineering, gives readers the most up-to-date view of the field currently available. Practical case studies, a full set of easy-to-access supplements, and extensive web resources make teaching the course easier than ever.

  13. Engineering knowledge

    OpenAIRE

    Nathan Rosenberg; W. Edward Steinmueller

    2013-01-01

    In historical perspective, both the nature of and arrangements for the generation of engineering knowledge have evolved over the past 150 years. We examine the historical development of the search for ‘useful knowledge’ in agriculture, aeronautics and chemical engineering during the first half of this period and the evolving balance between public and private initiative in supporting this search. During this period, the US was engaged in the engineering knowledge was often empirical, practice...

  14. Cognitive Engineering

    OpenAIRE

    Wilson, Kyle M.; Helton, William S.; Wiggins, Mark W.

    2013-01-01

    Cognitive engineering is the application of cognitive psychology and related disciplines to the design and operation of human–machine systems. Cognitive engineering combines both detailed and close study of the human worker in the actual work context and the study of the worker in more controlled environments. Cognitive engineering combines multiple methods and perspectives to achieve the goal of improved system performance. Given the origins of experimental psychology itself in issues regard...

  15. Radiochemical and Chemical Constituents in Water from Selected Wells and Springs from the Southern Boundary of the Idaho National Engineering and Environmental Laboratory to the Hagerman Area, Idaho, 2002

    Science.gov (United States)

    Rattray, Gordon W.; Campbell, Linford J.

    2004-01-01

    The U.S. Geological Survey, Idaho Department of Water Resources, and the State of Idaho INEEL Oversight Program, in cooperation with the U.S. Department of Energy, sampled water from 17 sites as part of the sixth round of a long-term project to monitor water quality of the eastern Snake River Plain aquifer from the southern boundary of the Idaho National Engineering and Environmental Laboratory to the Hagerman area. The samples were collected from eight irrigation wells, three domestic wells, one stock well, one dairy well, one commercial well, one observation well, and two springs and analyzed for selected radiochemical and chemical constituents. One quality-assurance sample, a sequential replicate, also was collected and analyzed. Many of the radionuclide and inorganic-constituent concentrations were greater than the reporting levels and most of the organic-constituent concentrations were less than the reporting levels. However, none of the reported radiochemical- or chemical-constituent concentrations exceeded the maximum contaminant levels for drinking water established by the U.S. Environmental Protection Agency. Statistical evaluation of the replicate sample pair indicated that, with 95 percent confidence, 132 of the 135 constituent concentrations of the replicate pair were equivalent.

  16. Radionuclides, stable isotopes, inorganic constituents, and organic compounds in water from selected wells and springs from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman Area, Idaho, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Bartholomay, R.C.; Edwards, D.D.; Campbell, L.J.

    1994-10-01

    The US Geological Survey and the Idaho Department of Water Resources, in response to a request from the US Department of Energy, sampled 19 sites as part of a long-term project to monitor water quality of the Snake River Plain aquifer from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman area. Water samples were collected and analyzed for selected radionuclides, stable isotopes, inorganic constituents, and organic compounds. The samples were collected from seven irrigation wells, four domestic wells, two springs, one stock well, three dairy wells, one observation well, and one commercial well. Two quality assurance samples also were collected and analyzed. None of the radionuclide, inorganic constituent, or organic compound concentrations exceeded the established maximum contaminant levels for drinking water. Most of the radionuclide and inorganic constituent concentrations exceeded their respective reporting levels. All samples analyzed for surfactants and dissolved organic carbon had concentrations that equaled or exceeded their reporting levels. The ethylbenzene concentration in one water sample exceeded the reporting level.

  17. Radionuclides, inorganic constituents, organic compounds, and bacteria in water from selected wells and springs from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman Area, Idaho, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Bartholomay, R.C.; Edwards, D.D. [Geological Survey, Idaho Falls, ID (United States); Campbell, L.J. [State of Idaho, Dept. of Water Resources (United States)

    1993-11-01

    The US Geological Survey and the Idaho Department of Water Resources, in response to a request from the US Department of Energy, sampled 18 sites as part of a long-term project to monitor water quality of the Snake River Plain aquifer from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman area. Water samples were collected and analyzed for manmade pollutants and naturally occurring constituents. The samples were collected from six irrigation wells, seven domestic wells, two springs, one stock well, one dairy well, and one observation well. Quality assurance samples also were collected and analyzed. The water samples were analyzed for selected radionuclides, inorganic constituents, organic compounds, and bacteria. None of the samples analyzed for radionuclides, inorganic constituents, or organic compounds exceeded the established maximum contaminant levels for drinking water. Most of the radionuclide and inorganic constituent concentrations exceeded their respective reporting levels. All the samples analyzed for dissolved organic carbon had concentrations that exceeded their reporting level. Concentrations of 1,1,1 -trichloroethane exceeded the reporting level in two water samples. Two samples and a quality assurance replicate contained reportable concentrations of 2, 4-D. One sample contained fecal coliform bacteria counts that exceeded established maximum contaminant levels for drinking water.

  18. Radionuclides, inorganic constituents, organic compounds, and bacteria in water from selected wells and springs from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman Area, Idaho, 1990

    Energy Technology Data Exchange (ETDEWEB)

    Bartholomay, R.C.; Edwards, D.D. [Geological Survey, Idaho Falls, ID (United States); Campbell, L.J. [State of Idaho, Dept. of Water Resources (United States)

    1992-03-01

    The US Geological Survey and the Idaho Department of Water Resources, in response to a request from the US Department of Energy, sampled 19 sites as part of a long-term project to monitor water quality of the Snake River Plain aquifer from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman area. Water samples were collected and analyzed for manmade pollutants and naturally occurring constituents. The samples were collected from seven irrigation wells, five domestic wells, two springs, one stock well, two dairy wells, one observation well, and one commercial well. Two quality assurance samples also were collected and analyzed. The water samples were analyzed for selected radionuclides, inorganic constituents, organic compounds, and bacteria. None of the radionuclides, inorganic constituents, or organic compounds exceeded the established maximum contaminant levels for drinking water. Most of the radionuclide and inorganic constituent concentrations exceeded their respective reporting levels. All samples analyzed for surfactants and dissolved organic carbon had concentrations that exceeded their reporting level. Toluene concentrations exceeded the reporting level in one water sample. Two samples contained fecal coliform bacteria counts that exceeded established maximum contaminant levels for drinking water.

  19. Radionuclides, inorganic constitutents, organic compounds, and bacteria in water from selected wells and springs from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman Area, Idaho, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Bartholomay, R.C.; Edwards, D.D.; Campbell, L.J.

    1994-11-01

    The U.S. Geological Survey and the Idaho Department of Water Resources, in response to a request from the U.S. Department of Energy, sampled 18 sites as part of a long-term project to monitor water quality of the Snake River Plain aquifer from the southern boundary of the Idaho National Engineering Laboratory to the Hagerman area. Water samples were collected and analyzed for selected radionuclides, inorganic constituents, organic compounds, and bacteria. The samples were collected from 13 irrigation wells, 1 domestic well, 1 spring, 2 stock wells, and 1 public supply well. Quality assurance samples also were collected and analyzed. None of the samples analyzed for radionuclides, inorganic constituents, or organic compounds exceeded the established maximum contaminant levels for drinking water. Most of the radionuclide and inorganic constituent concentrations exceeded their respective reporting levels. Most of the samples analyzed for surfactants and dissolved organic carbon had concentrations that exceeded their reporting levels. None of the samples contained reportable concentrations of purgeable organic compounds or pesticides. Total coliform bacteria was present in nine samples.

  20. Engineering tribology

    CERN Document Server

    Stachowiak, Gwidon; Batchelor, A W; Batchelor, Andrew W

    2005-01-01

    As with the previous edition, the third edition of Engineering Tribology provides a thorough understanding of friction and wear using technologies such as lubrication and special materials. Tribology is a complex topic with its own terminology and specialized concepts, yet is vitally important throughout all engineering disciplines, including mechanical design, aerodynamics, fluid dynamics and biomedical engineering. This edition includes updated material on the hydrodynamic aspects of tribology as well as new advances in the field of biotribology, with a focus throughout on the engineering ap

  1. Deputy for Engineering Facility Alternatives,

    Science.gov (United States)

    1983-04-01

    ENVP 4 520 ENFPA 18 2,340 50 ENFPE 12 1,560 ENFPI 6 780 ENFZ 36 4,680 96 1,225 275 35,750 1,920 136 1,895 5.450 45,151 ENS 4 520 ENSA 14 1,820 150 ENSG...to satisfy these needs. DIVISION: ENFP ENFP Provides system engineering, technical direction and engineering management in the areas of engines

  2. Software Engineering Improvement Plan

    Science.gov (United States)

    2006-01-01

    In performance of this task order, bd Systems personnel provided support to the Flight Software Branch and the Software Working Group through multiple tasks related to software engineering improvement and to activities of the independent Technical Authority (iTA) Discipline Technical Warrant Holder (DTWH) for software engineering. To ensure that the products, comments, and recommendations complied with customer requirements and the statement of work, bd Systems personnel maintained close coordination with the customer. These personnel performed work in areas such as update of agency requirements and directives database, software effort estimation, software problem reports, a web-based process asset library, miscellaneous documentation review, software system requirements, issue tracking software survey, systems engineering NPR, and project-related reviews. This report contains a summary of the work performed and the accomplishments in each of these areas.

  3. Forensic geotechnical engineering

    CERN Document Server

    Babu, GL

    2016-01-01

    In this edited volume on advances in forensic geotechnical engineering, a number of technical contributions by experts and professionals in this area are included. The work is the outcome of deliberations at various conferences in the area conducted by Prof. G.L. Sivakumar Babu and Dr. V.V.S. Rao as secretary and Chairman of Technical Committee on Forensic Geotechnical Engineering of International Society for Soil Mechanics and Foundation Engineering (ISSMGE). This volume contains papers on topics such as guidelines, evidence/data collection, distress characterization, use of diagnostic tests (laboratory and field tests), back analysis, failure hypothesis formulation, role of instrumentation and sensor-based technologies, risk analysis, technical shortcomings. This volume will prove useful to researchers and practitioners alike.

  4. Brain correlates of subjective freedom of choice

    Science.gov (United States)

    Filevich, Elisa; Vanneste, Patricia; Brass, Marcel; Fias, Wim; Haggard, Patrick; Kühn, Simone

    2013-01-01

    The subjective feeling of free choice is an important feature of human experience. Experimental tasks have typically studied free choice by contrasting free and instructed selection of response alternatives. These tasks have been criticised, and it remains unclear how they relate to the subjective feeling of freely choosing. We replicated previous findings of the fMRI correlates of free choice, defined objectively. We introduced a novel task in which participants could experience and report a graded sense of free choice. BOLD responses for conditions subjectively experienced as free identified a postcentral area distinct from the areas typically considered to be involved in free action. Thus, the brain correlates of subjective feeling of free action were not directly related to any established brain correlates of objectively-defined free action. Our results call into question traditional assumptions about the relation between subjective experience of choosing and activity in the brain’s so-called voluntary motor areas. PMID:24021855

  5. Engineering dynamics from the Lagrangian to simulation

    CERN Document Server

    Gans, Roger F

    2013-01-01

    This engineering dynamics textbook is aimed at beginning graduate students in mechanical engineering and other related engineering disciplines who need training in dynamics as applied to engineering mechanisms. It introduces the formal mathematical development of Lagrangian mechanics (and its corollaries), while solving numerous engineering applications. The author’s goal is to instill an understanding of the basic physics required for engineering dynamics, while providing a recipe (algorithm) for the simulation of engineering mechanisms such as robots. The book is reasonably self-contained so that the practicing engineer interested in this area can also make use of it. This book is made accessible to the widest possible audience by numerous, solved examples and diagrams that apply the principles to real engineering applications. • Provides an applied textbook for intermediate/advanced engineering dynamics courses; • Discusses Lagrangian mechanics in the context of numerous engineering applications...

  6. Competence Centered Specialization in Web Engineering Topics in a Software Engineering Masters Degree Programme

    DEFF Research Database (Denmark)

    Dolog, Peter; Thomsen, Lone Leth; Thomsen, Bent

    2010-01-01

    as on general competence based web engineering proles oered also for those who specialize in other areas of software engineering. We describe the current state of the art and our experience with a web engineering curriculum within the software engineering masters degree programme. We also discuss an evolution...

  7. Imaging: Insight Engineering.

    Science.gov (United States)

    Weaver, Richard L., II; Cotrell, Howard W.

    Imaging is the process of creating mental pictures that can be scanned as people would scan a current event. It is a real, powerful personal process, which has been used in medicine, science, health care, sports, creativity, education, and other areas. On a day-to-day level, imaging can be used to engineer insights regarding self-concept,…

  8. Historical aspects about of environmental and sanitary engineering development in local, regional and world area; Aspectos historicos del desarrollo de la ingenieria sanitaria y ambiental en el ambito local, regional y mundial

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Miranda, J. P.

    2010-07-01

    The development of sanitary and environmental engineering has been significant progress over time reflected in the use of technology to solve problems of different communities not only have engineering aspects but always goes hand in hand with social and cultural. In a short, set out in this paper some significant historical facts before Christ until these days where development has been evident in the field of engineering. (Author) 27 refs.

  9. 40 CFR 1060.1 - Which products are subject to this part's requirements?

    Science.gov (United States)

    2010-07-01

    ... installation on a fuel tank. If a fuel cap is certified for use with Marine SI engines or Small SI engines... motor vehicle engines (see 40 CFR part 86). This part 1060 also does not apply to fuel systems for nonroad engines where such fuel systems are subject to part 86 because they are part of a heavy-duty motor...

  10. Civil Engineering Technology Needs Assessment.

    Science.gov (United States)

    Oakland Community Coll., Farmington, MI. Office of Institutional Planning and Analysis.

    In 1991, a study was conducted by Oakland Community College (OCC) to evaluate the need for a proposed Civil Engineering Technology program. An initial examination of the literature focused on industry needs and the job market for civil engineering technicians. In order to gather information on local area employers' hiring practices and needs, a…

  11. Job Prospects for Civil Engineers.

    Science.gov (United States)

    Basta, Nicholas

    1985-01-01

    Government programs and renewed industrial activity have combined with stable enrollments to create bright job prospects for civil engineers. Areas with good opportunities include highway reconstruction and rehabilitation, water-resource management, and new factory construction. The subspecialty of structural engineering has a growing need in…

  12. Biomaterials for tissue engineering: summary

    Science.gov (United States)

    Christenson, L.; Mikos, A. G.; Gibbons, D. F.; Picciolo, G. L.; McIntire, L. V. (Principal Investigator)

    1997-01-01

    This article summarizes presentations and discussion at the workshop "Enabling Biomaterial Technology for Tissue Engineering," which was held during the Fifth World Biomaterials Congress in May 1996. Presentations covered the areas of material substrate architecture, barrier effects, and cellular response, including analysis of biomaterials challenges involved in producing specific tissue-engineered products.

  13. Electromagnetic compatibility engineering

    CERN Document Server

    Ott, Henry W

    2009-01-01

    Praise for Noise Reduction Techniques IN electronic systems ""Henry Ott has literally 'written the book' on the subject of EMC. . . . He not only knows the subject, but has the rare ability to communicate that knowledge to others.""-EE Times Electromagnetic Compatibility Engineering is a completely revised, expanded, and updated version of Henry Ott's popular book Noise Reduction Techniques in Electronic Systems. It reflects the most recent developments in the field of electromagnetic compatibility (EMC) and noise reduction¿and their practical applications t

  14. Engineering Administration.

    Science.gov (United States)

    Naval Personnel Program Support Activity, Washington, DC.

    This book is intended to acquaint naval engineering officers with their duties in the engineering department. Standard shipboard organizations are analyzed in connection with personnel assignments, division operations, and watch systems. Detailed descriptions are included for the administration of directives, ship's bills, damage control, training…

  15. Engineering News

    OpenAIRE

    Nystrom, Lynn; Haugh, Lindsey; Simpkins, David

    2014-01-01

    Engineering News is the College of Engineering's annual newsletter sent to all alumni of the college. Virginia Tech leaders, along with counterparts in New Jersey, welcomed a late December approval by the Federal Aviation Administration to operate a test site to integrate unmanned aircraft into the national airspace.

  16. Food Engineering

    NARCIS (Netherlands)

    Boom, R.M.; Janssen, A.E.M.

    2014-01-01

    Food engineering is a rapidly changing discipline. Traditionally, the main focus was on food preservation and stabilization, whereas trends now are on diversity, health, taste, and sustainable production. Next to a general introduction of the definition of food engineering, this article gives a

  17. Corrosion Engineering.

    Science.gov (United States)

    White, Charles V.

    A description is provided for a Corrosion and Corrosion Control course offered in the Continuing Engineering Education Program at the General Motors Institute (GMI). GMI is a small cooperative engineering school of approximately 2,000 students who alternate between six-week periods of academic study and six weeks of related work experience in…

  18. Women Engineer.

    Science.gov (United States)

    Neustadtl, Sara Jane

    This booklet is designed to provide information to girls about the nature of and possible career opportunities in engineering. Following a brief introduction in which the characteristics of engineers are outlined (such as ability to solve problems, interest in science/mathematics, and urge to make creative use of their intelligence), answers to…

  19. Genetic Engineering

    Science.gov (United States)

    Phillips, John

    1973-01-01

    Presents a review of genetic engineering, in which the genotypes of plants and animals (including human genotypes) may be manipulated for the benefit of the human species. Discusses associated problems and solutions and provides an extensive bibliography of literature relating to genetic engineering. (JR)

  20. Biomedical Engineering

    CERN Document Server

    Suh, Sang C; Tanik, Murat M

    2011-01-01

    Biomedical Engineering: Health Care Systems, Technology and Techniques is an edited volume with contributions from world experts. It provides readers with unique contributions related to current research and future healthcare systems. Practitioners and researchers focused on computer science, bioinformatics, engineering and medicine will find this book a valuable reference.

  1. Systems Engineering

    Science.gov (United States)

    Pellerano, Fernando

    2015-01-01

    This short course provides information on what systems engineering is and how the systems engineer guides requirements, interfaces with the discipline leads, and resolves technical issues. There are many system-wide issues that either impact or are impacted by the thermal subsystem. This course will introduce these issues and illustrate them with real life examples.

  2. 24 January 2012 - British Vice-Chancellor of the University of Cambridge Sir Leszek Borysiewicz signing the guest book with CERN Director-General, visiting ATLAS experimental area with Collaboration Deputy Spokesperson D. Charlton and Sm18 with engineer R. Veness.

    CERN Multimedia

    Jean-Claude Gadmer

    2012-01-01

    24 January 2012 - British Vice-Chancellor of the University of Cambridge Sir Leszek Borysiewicz signing the guest book with CERN Director-General, visiting ATLAS experimental area with Collaboration Deputy Spokesperson D. Charlton and Sm18 with engineer R. Veness.

  3. 10 January 2011 - Former Minister of Science and Technology Honorary Member of the National Academy of Engineering of Korea J.-U.SEO in the CMS underground experimental area with Deputy Spokesperson J. Incandela, Former Adviser D. Blechschmidt and Adviser R. Voss.

    CERN Multimedia

    Maximilien brice

    2011-01-01

    10 January 2011 - Former Minister of Science and Technology Honorary Member of the National Academy of Engineering of Korea J.-U.SEO in the CMS underground experimental area with Deputy Spokesperson J. Incandela, Former Adviser D. Blechschmidt and Adviser R. Voss.

  4. Emotional engineering

    CERN Document Server

    In an age of increasing complexity, diversification and change, customers expect services that cater to their needs and to their tastes. Emotional Engineering vol 2. describes how their expectations can be satisfied and managed throughout the product life cycle, if producers focus their attention more on emotion. Emotional engineering provides the means to integrate products to create a new social framework and develops services beyond product realization to create of value across a full lifetime.  14 chapters cover a wide range of topics that can be applied to product, process and industry development, with special attention paid to the increasing importance of sensing in the age of extensive and frequent changes, including: • Multisensory stimulation and user experience  • Physiological measurement • Tactile sensation • Emotional quality management • Mental model • Kansei engineering.   Emotional Engineering vol 2 builds on Dr Fukuda’s previous book, Emotional Engineering, and provides read...

  5. Dynamic Stability of Columns Subjected to Follower Loads: a Survey

    Science.gov (United States)

    LANGTHJEM, M. A.; SUGIYAMA, Y.

    2000-12-01

    This paper offers a survey of simple, flexible structural elements subjected to non-conservative follower loads, such as those caused by the thrust of rocket- and jet engines, and by dry friction in automotive disk- and drum-brake systems. Emphasis is on the “canonical problems”, Beck's, Reut's, Leipholz's, and Hauger's columns. Beck's and Reut's columns have been realized experimentally, and very good agreement between theory and experiments has been found. Leipholz's column is basically realized in an automobile brake system, where noise due to dynamic or parametric instability (brake squeal) is a well-known environmental problem. It is attempted to give a broad overview, with emphasis on experimental works and the associated theoretical problems. Structural optimization is also included in the review, as many studies in that area have served an important purpose in the development of optimization techniques for practical, large-scale optimization problems with non-conservative forces, such as in aeroelasticity.

  6. Biosystems and Food Engineering Research Review 22

    OpenAIRE

    Cummins, Enda; Curran, Thomas P.

    2017-01-01

    The Twenty Second Annual Research Review describes the ongoing research programme in the School of Biosystems and Food Engineering at University College Dublin from over 98 researchers (12 academic staff, 1 technician, 11 postdoctoral researchers and 74 postgraduates). The research programme covers three focal areas: Food and Process Engineering; Bioresource Systems; and Bioenvironmental Engineering. Each area is divided into sub-areas as outlined in the Table of Contents which also includes ...

  7. Aircraft Engine Crankshaft Optimisation

    Directory of Open Access Journals (Sweden)

    Vopařil Jan

    2014-10-01

    Full Text Available This article presents part of the crankshaft development of a two-stroke compression-ignition engine with contra-running pistons where, for invariably specified diameters and pin lengths, the optimal crankshaft shape is searched for. The process of creating several options which are then subjected to critical evaluation followed by the selection mechanism for the final best possible design is described.

  8. Estimating Subjective Probabilities

    DEFF Research Database (Denmark)

    Andersen, Steffen; Fountain, John; Harrison, Glenn W.

    Subjective probabilities play a central role in many economic decisions, and act as an immediate confound of inferences about behavior, unless controlled for. Several procedures to recover subjective probabilities have been proposed, but in order to recover the correct latent probability one must...

  9. Estimating Subjective Probabilities

    DEFF Research Database (Denmark)

    Andersen, Steffen; Fountain, John; Harrison, Glenn W.

    2014-01-01

    Subjective probabilities play a central role in many economic decisions and act as an immediate confound of inferences about behavior, unless controlled for. Several procedures to recover subjective probabilities have been proposed, but in order to recover the correct latent probability one must ...

  10. Subjective meaning: an introduction

    NARCIS (Netherlands)

    van Wijnbergen-Huitink, Janneke; van Wijbergen-Huitink, Janneke; Meier, Cécile

    This introductory chapter traces some of the considerations on the basis of which relativistic approaches to subjective meaning became en vogue. In doing so, the chapter provides an overview of the relevant linguistic and philosophical issues when developing a treatment of subjectivity. In addition,

  11. Subjective safety in traffic.

    NARCIS (Netherlands)

    2012-01-01

    The term ‘subjective safety in traffic’ refers to people feeling unsafe in traffic or, more generally, to anxiety regarding being unsafe in traffic for oneself and/or others. Subjective safety in traffic can lead to road users limiting their mobility and social activities, which is one of the

  12. Subjective poverty line definitions

    NARCIS (Netherlands)

    J. Flik; B.M.S. van Praag (Bernard)

    1991-01-01

    textabstractIn this paper we will deal with definitions of subjective poverty lines. To measure a poverty threshold value in terms of household income, which separates the poor from the non-poor, we take into account the opinions of all people in society. Three subjective methods will be discussed

  13. Control Areas

    Data.gov (United States)

    Department of Homeland Security — This feature class represents electric power Control Areas. Control Areas, also known as Balancing Authority Areas, are controlled by Balancing Authorities, who are...

  14. Operational Area Environmental Evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Bailey-White, Brenda Eileen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Nagy, Michael David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Wagner, Katrina Marie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Goodman, Thomas Richard [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Herring, Allen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Catechis, Christopher S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kinghorn, Aubrianna Nicole [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Johnson, Ellie [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Barthel, Michael David [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Casaus, Benito [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-08-01

    The Operational Area Environmental Evaluation update provides a description of activities that have the potential to adversely affect natural and cultural resources, including soil, air, water, biological, ecological, and historical resources. The environmental sensitivity of an area is evaluated and summarized, which may facilitate informed management decisions as to where development may be prohibited, restricted, or subject to additional requirements.

  15. Evaluation of Quality-Assurance/Quality-Control Data Collected by the U.S. Geological Survey from Wells and Springs between the Southern Boundary of the Idaho National Engineering and Environmental Laboratory and the Hagerman Area, Idaho, 1989 through 1995

    Energy Technology Data Exchange (ETDEWEB)

    Williams, L.M.; Bartholomay, R.C.; Campbell, L.J.

    1998-10-01

    The U.S. Geological (USGS) and the Idaho Department of Water Resources, in cooperation with the U.S. Department of Energy, collected and analyzed water samples to monitor the water quality of the Snake River Plain aquifer from the southern boundary of the Idaho National Engineering and Environmental Laboratory to the Hagerman area, Idaho. Concurrently, replicate samples and blank samples were collected and analyzed as part of the quality-assurance/quality-control program. Samples were analyzed from inorganic constituents, gross radioactivity and radionuclides, organic constituents, and stable isotopes. To evaluate the precision of field and laboratory methods, analytical results of the water-quality and replicate samples were compared statistically for equivalence on the basis of the precision associated with each result. Statistical comparisons of the data indicated that 95 percent of the results of the replicate pairs were equivalent. Blank-sample analytical results indicated th at the inorganic blank water and volatile organic compound blank water from the USGS National Water Quality Laboratory and the distilled water from the Idaho Department of Water Resources were suitable for blanks; blank water from other sources was not. Equipment-blank analytical results were evaluated to determine if a bias had been introduced and possible sources of bias. Most equipment blanks were analyzed for trace elements and volatile organic compounds; chloroform was found in one equipment blank. Two of the equipment blanks were prepared after collection and analyses of the water-quality samples to determine whether contamination had been introduced during the sampling process. Results of one blank indicated that a hose used to divert water away from pumps and electrical equipment had contaminated the samples with some volatile organic compounds. Results of the other equipment blank, from the apparatus used to filter dissolved organic carbon samples, indicated that the filtering

  16. Unifying Subjectivity and Objectivity

    Directory of Open Access Journals (Sweden)

    Murugesan Chandrasekaran

    2016-10-01

    Full Text Available The contribution of modern science to the progress of civilization is immeasurable. Even its tendency toward exclusive concentration on the objective world has had salutary effects of great value. Modern science has wiped away much that was merely superstitious or speculative. Its rejection of unfounded opinions and prejudices has helped the thinking mind question conventional beliefs, shed preferences and prejudices, and challenge established authority. But modern systems thinking inherited from natural science is the suppression of the subjective dimension of reality. Many complex systems are an attempt to define and represent all subjective experience in physical terms. The modern man has a bias towards objectivity. The powerful influence of sense impressions on his mind and thinking makes him ignore the subjective experience and consider only objective facts as a valid, legitimate and representation of reality. Observing objective factors that are physical is easier than observing subjective factors that are subtle. The mechanistic view of reality has led to the rejection of the role of the individual in social development as insignificant. The individuals determine the development of society. Their social power has its roots both in subjective factors and objective factors. Economy, politics, society, and culture are inseparable dimensions of a single integrated reality. Subject and object constitute an integrated whole. The mind sees them as separate and independent. Or it views one as completely subordinate to the other. Unbiased approach to the study of all human experiences may prove that subject and object are interdependent dimensions or elements of reality.

  17. Learning-Centered Instruction of Engineering Graphics for Freshman Engineering Students

    Science.gov (United States)

    Pucha, Raghuram V.; Utschig, Tristan T.

    2012-01-01

    Teaching "Engineering Graphics" to freshman engineering students poses challenges to instructors as well as to students. While the instructors are confronted with a lack of material / text book that covers the broad scope of the subject matter, the students struggle to correlate newly developed skills to real-world engineering design problems…

  18. Glycosylation Engineering

    DEFF Research Database (Denmark)

    Clausen, Henrik; Wandall, Hans H.; Steentoft, Catharina

    2017-01-01

    Knowledge of the cellular pathways of glycosylation across phylogeny provides opportunities for designing glycans via genetic engineering in a wide variety of cell types including bacteria, fungi, plant cells, and mammalian cells. The commercial demand for glycosylation engineering is broad......, including production of biological therapeutics with defined glycosylation (Chapter 57). This chapter describes how knowledge of glycan structures and their metabolism (Parts I–III of this book) has led to the current state of glycosylation engineering in different cell types. Perspectives for rapid...

  19. Engineering mathematics

    CERN Document Server

    Bird, John

    2014-01-01

    A practical introduction to the core mathematics required for engineering study and practiceNow in its seventh edition, Engineering Mathematics is an established textbook that has helped thousands of students to succeed in their exams.John Bird's approach is based on worked examples and interactive problems. This makes it ideal for students from a wide range of academic backgrounds as the student can work through the material at their own pace. Mathematical theories are explained in a straightforward manner, being supported by practical engineering examples and applications in order to ensure

  20. RUSSIAN LAW SUBJECTS

    Directory of Open Access Journals (Sweden)

    D.N. Bakhrakh

    2006-03-01

    Full Text Available The question about the subjects of law branches is concerning the number of most important and difficult in law science. Its right decision influences on the subject of law regulation, precise definition of addressees of law norms, the volume of their rights and duties, the limits of action of norms of Main part of the branch, its principles. Scientific investigations, dedicated to law subjects system, promote the development of recommendations for the legislative and law applying activity; they are needed for scientific work organization and student training, for preparing qualified lawyers.

  1. Electric power substations engineering

    CERN Document Server

    McDonald, John D

    2012-01-01

    The use of electric power substations in generation, transmission, and distribution remains one of the most challenging and exciting areas of electric power engineering. Recent technological developments have had a tremendous impact on all aspects of substation design and operation. With 80% of its chapters completely revised and two brand-new chapters on energy storage and Smart Grids, Electric Power Substations Engineering, Third Edition provides an extensive updated overview of substations, serving as a reference and guide for both industry and academia. Contributors have written each chapt

  2. Mechanical design engineering handbook

    CERN Document Server

    Childs, Peter R N

    2013-01-01

    Mechanical Design Engineering Handbook is a straight-talking and forward-thinking reference covering the design, specification, selection, use and integration of machine elements fundamental to a wide range of engineering applications. Develop or refresh your mechanical design skills in the areas of bearings, shafts, gears, seals, belts and chains, clutches and brakes, springs, fasteners, pneumatics and hydraulics, amongst other core mechanical elements, and dip in for principles, data and calculations as needed to inform and evaluate your on-the-job decisions. Covering the full spectrum

  3. Green in software engineering

    CERN Document Server

    Calero Munoz, Coral

    2015-01-01

    This is the first book that presents a comprehensive overview of sustainability aspects in software engineering. Its format follows the structure of the SWEBOK and covers the key areas involved in the incorporation of green aspects in software engineering, encompassing topics from requirement elicitation to quality assurance and maintenance, while also considering professional practices and economic aspects. The book consists of thirteen chapters, which are structured in five parts. First the "Introduction" gives an overview of the primary general concepts related to Green IT, discussing wha

  4. Florida Master Teacher Program: Testing Teacher Subject Matter Knowledge.

    Science.gov (United States)

    Lavely, Carolyn; And Others

    1986-01-01

    The efforts of the Florida Institute for Instructional Research and Practice in designing, developing, and analyzing the subject area knowledge tests of the Florida Master Teacher Program are described. A total of 13 subject area examinations was developed in 1984-85, and 5 additional tests were developed the following year. For each subject area…

  5. Energy Data Base: Subject Thesaurus

    Energy Technology Data Exchange (ETDEWEB)

    Raridon, M.H. (ed.)

    1987-09-01

    This seventh edition of the subject thesaurus contains the standard vocabulary of indexing terms (descriptors) developed and structured by the technical staff of the Office of Scientific and Technical Information as part of its subject indexing activities for building and maintaining the Energy Data Base (EDB) and other energy information data bases for the Department of Energy (DOE). The purpose of this thesaurus is to enhance the efficiency of information retrieval from these data bases. This structured vocabulary reflects the scope of DOE's research, development, and technological programs and encompasses terminology derived not only from the basic sciences for also from areas of energy resources, conservation, safety, environmental impact, and regulation. There are 21,080 valid descriptors and 5683 forbidden terms in this edition of the Thesaurus. These descriptors are listed alphabetically.

  6. CLASSIFIED BY SUBJECT IN SPORT SCIENCES

    Directory of Open Access Journals (Sweden)

    Petar Protić

    2007-05-01

    Full Text Available High school and academic libraries users need precise classifi cation and subject access review of printed and electronic resources. In library catalogue since, Universal Decimal Classifi cation (UDC -similar to Dewey system - ex classifi es research and scientifi c areas. in subject areas of 796 Sport and 371 Teaching. Nowadays, users need structure of subjects by disciplines in science. Full-open resources of library must be set for users in subject access catalogue, because on the example of bachelors degree thesis in Faculty of Physical Education in Novi Sad they reaches for disciplines in database with 36 indexes sort by fi rst letters in names (Athletics, Boxing, Cycling, etc. This database have single and multiplied index for each thesis. Users in 80% cases of research according to the subject access catalogue of this library.

  7. 46 CFR 11.950 - Subjects for engineer endorsements.

    Science.gov (United States)

    2010-10-01

    ... P-T P-T P-T P-T P-T P-T P-T P P P P P Ship Construction and Repair P-T P-T P-T P-T P-T P-T P-T P-T P-T P-T P-T P-T P-T P-T P P P-T P Theory T T T T T T T T T T T T T T T T T T Steering Systems P-T P-T... Refrigeration and Air Conditioning: Theory T T T T T T T T T T T T T T T T T T Air Conditioning Systems P-T P-T...

  8. Harmonic engine

    Science.gov (United States)

    Bennett, Charles L [Livermore, CA

    2009-10-20

    A high efficiency harmonic engine based on a resonantly reciprocating piston expander that extracts work from heat and pressurizes working fluid in a reciprocating piston compressor. The engine preferably includes harmonic oscillator valves capable of oscillating at a resonant frequency for controlling the flow of working fluid into and out of the expander, and also preferably includes a shunt line connecting an expansion chamber of the expander to a buffer chamber of the expander for minimizing pressure variations in the fluidic circuit of the engine. The engine is especially designed to operate with very high temperature input to the expander and very low temperature input to the compressor, to produce very high thermal conversion efficiency.

  9. ENGINEERING PSYCHOLOGY,

    Science.gov (United States)

    MAN MACHINE SYSTEMS, APPLIED PSYCHOLOGY ), INFORMATION THEORY, ELECTROPHYSIOLOGY, HUMAN FACTORS ENGINEERING, PERCEPTION( PSYCHOLOGY ...PSYCHOPHYSIOLOGY, AUTOMATION, BRAIN, AUDITORY PERCEPTION, VISUAL PERCEPTION, MEMORY( PSYCHOLOGY ), MOTOR REACTIONS, NOISE, PERFORMANCE(HUMAN), USSR

  10. Green Engineering

    Science.gov (United States)

    Green Engineering is the design, commercialization and use of processes and products that are feasible and economical while reducing the generation of pollution at the source and minimizing the risk to human health and the environment.

  11. Coastal Engineering

    OpenAIRE

    Van der Velden, E.T.J.M.

    1989-01-01

    Introduction, waves, sediment transport, littoral transport, lonshore sediment transport, onshore-offshore sediment transport, coastal changes, dune erosion and storm surges, sedimentation in channels and trenches, coastal engineering in practice.

  12. Cognitive engineering.

    Science.gov (United States)

    Wilson, Kyle M; Helton, William S; Wiggins, Mark W

    2013-01-01

    Cognitive engineering is the application of cognitive psychology and related disciplines to the design and operation of human-machine systems. Cognitive engineering combines both detailed and close study of the human worker in the actual work context and the study of the worker in more controlled environments. Cognitive engineering combines multiple methods and perspectives to achieve the goal of improved system performance. Given the origins of experimental psychology itself in issues regarding the design of human-machine systems, cognitive engineering is a core, or fundamental, discipline within academic psychology. WIREs Cogn Sci 2013, 4:17-31. doi: 10.1002/wcs.1204 CONFLICT OF INTEREST: The authors declare no conflict of interest. For further resources related to this article, please visit the WIREs website. Copyright © 2012 John Wiley & Sons, Ltd.

  13. The Data Subject

    DEFF Research Database (Denmark)

    Blume, Peter

    2015-01-01

    This article considers whether it is fortunate that data protection rules, as a starting point, apply to all physical persons as data subjects, or whether it would be better to differentiate between kinds of persons on grounds of their ability to act as a data subject. In order to protect all...... persons, it is argued that a principle of care should be part of data protection law....

  14. Engineering liver

    OpenAIRE

    Linda G Griffith; Wells, Alan; Stolz, Donna Beer

    2013-01-01

    Interest in “engineering liver” arises from multiple communities: therapeutic replacement; mechanistic models of human processes; and drug safety and efficacy studies. An explosion of micro- and nano-fabrication, biomaterials, microfluidic, and other technologies potentially afford unprecedented opportunity to create microphysiological models of human liver, but engineering design principles for how to deploy these tools effectively towards specific applications, including how to define the e...

  15. Microwave engineering

    CERN Document Server

    Pozar, David M

    2012-01-01

    The 4th edition of this classic text provides a thorough coverage of RF and microwave engineering concepts, starting from fundamental principles of electrical engineering, with applications to microwave circuits and devices of practical importance.  Coverage includes microwave network analysis, impedance matching, directional couplers and hybrids, microwave filters, ferrite devices, noise, nonlinear effects, and the design of microwave oscillators, amplifiers, and mixers. Material on microwave and RF systems includes wireless communications, radar, radiometry, and radiation hazards. A large

  16. Web Engineering

    OpenAIRE

    Deshpande, Yogesh; Murugesan, San; Ginige, Athula; Hansen, Steve; Schwabe, Daniel; Gaedke, Martin; White, Bebo

    2003-01-01

    Web Engineering is the application of systematic, disciplined and quantifiable approaches to development, operation, and maintenance of Web-based applications. It is both a pro-active approach and a growing collection of theoretical and empirical research in Web application development. This paper gives an overview of Web Engineering by addressing the questions: a) why is it needed? b) what is its domain of operation? c) how does it help and what should it do to improve Web application develo...

  17. Climate engineering

    OpenAIRE

    Platt, Ulrich

    2014-01-01

    Es klingt wie eine Mischung aus Größenwahn und Science Fiction: Wissenschaftler wollen das Klima mit Hightechverfahren beeinflussen. "Climate engineering" heißt der Fachbegriff. Natürlich geht es dabei nicht um den verregneten Sommer, sondern um den globalen Klimawandel. Campus-Reporter Nils Birschmann hat sich bei den Umweltforschern der Uni Heidelberg umgehört, ob was dran ist am "climate engineering". Der Beitrag erschien in der Sendereihe "Campus-Report" - einer Beitragsreihe, in ...

  18. Offshore Engineering

    OpenAIRE

    Vannucci, P

    2008-01-01

    Master; This course on Offshore Engineering is a basic course serving as an introduction to the problems concerning design and construction of offshore platforms, normally used in oil industry. So, some topics will be considered in this course, namely the principal ones that concern the structural design of an offshore platform; some other topics, like for instance marine installation procedures, corrosion protection, facilities and plants engineering will not be considered here. The course i...

  19. An Online Graduate Requirements Engineering Course

    Science.gov (United States)

    Kilicay-Ergin, N.; Laplante, P. A.

    2013-01-01

    Requirements engineering is one of the fundamental knowledge areas in software and systems engineering graduate curricula. Recent changes in educational delivery and student demographics have created new challenges for requirements engineering education. In particular, there is an increasing demand for online education for working professionals.…

  20. 30 CFR 57.5067 - Engines.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Engines. 57.5067 Section 57.5067 Mineral... Agents, and Diesel Particulate Matter Diesel Particulate Matter-Underground Only § 57.5067 Engines. (a) Any diesel engine introduced into an underground area of a mine covered by this part after July 5...

  1. Early labour market returns to college subjects

    DEFF Research Database (Denmark)

    Buonanno, Paolo; Pozzoli, Dario

    This paper aims at estimating early labour market outcomes  of Italian university graduates across college subjects. We devote great attention to endogenous selection issues using alternative methods to control for potential self-selection associated with the choice of the degree subject in order...... to unravel the causal link between college major and subsequent outcomes in the labour market.  Our results suggest that "quantitative" fields (i.e. Sciences, Engineering and Economics) increase not only the speed of transition into the first job and employment probability but also early earnings...

  2. Early Labour Market Returns to College Subject

    DEFF Research Database (Denmark)

    Buonanno, Paolo; Pozzoli, Dario

    2009-01-01

    We estimate early labour market outcomes of Italian university  graduates across college subjects. We devote great attention to endogenous selection issues using alternative methods to control for potential self-selection associated with the choice of the degree subject in order to unravel...... the causal link between college major and subsequent outcomes in the labour market. Our results suggest that 'quantitative' fields (i.e. Sciences, Engineering, and Economics) increase not only the speed of transition into the first job and employment probability but also early earnings, conditional...

  3. Handbook of mechanical engineering terms

    CERN Document Server

    Ramalingam, KK

    2009-01-01

    About the Book: The Handbook of Mechanical Engineering terms contains short, precise definitions of about four thousand terms. These terms have been collected from different sources, edited and grouped under twenty six parts and given alphabetically under each part for easy reference. The book will be a source of guidance and help to the students, staff and practising engineers in understanding and updating the subject matter. Contents: The Handbook of Mechanical Engineering terms contains short, precise definitions of about four thousand terms. These terms have been collected from differ

  4. Digital calculations of engine cycles

    CERN Document Server

    Starkman, E S; Taylor, C Fayette

    1964-01-01

    Digital Calculations of Engine Cycles is a collection of seven papers which were presented before technical meetings of the Society of Automotive Engineers during 1962 and 1963. The papers cover the spectrum of the subject of engine cycle events, ranging from an examination of composition and properties of the working fluid to simulation of the pressure-time events in the combustion chamber. The volume has been organized to present the material in a logical sequence. The first two chapters are concerned with the equilibrium states of the working fluid. These include the concentrations of var

  5. Electromagnetic foundations of electrical engineering

    CERN Document Server

    Faria, J A Brandao

    2008-01-01

    The applications of electromagnetic phenomena within electrical engineering have been evolving and progressing at a fast pace. In contrast, the underlying principles have been stable for a long time and are not expected to undergo any changes. It is these electromagnetic field fundamentals that are the subject of discussion in this book with an emphasis on basic principles, concepts and governing laws that apply across the electrical engineering discipline. Electromagnetic Foundations of Electrical Engineering begins with an explanation of Maxwell's equations, from which the fundament

  6. Artificially Engineered Protein Polymers.

    Science.gov (United States)

    Yang, Yun Jung; Holmberg, Angela L; Olsen, Bradley D

    2017-06-07

    Modern polymer science increasingly requires precise control over macromolecular structure and properties for engineering advanced materials and biomedical systems. The application of biological processes to design and synthesize artificial protein polymers offers a means for furthering macromolecular tunability, enabling polymers with dispersities of ∼1.0 and monomer-level sequence control. Taking inspiration from materials evolved in nature, scientists have created modular building blocks with simplified monomer sequences that replicate the function of natural systems. The corresponding protein engineering toolbox has enabled the systematic development of complex functional polymeric materials across areas as diverse as adhesives, responsive polymers, and medical materials. This review discusses the natural proteins that have inspired the development of key building blocks for protein polymer engineering and the function of these elements in material design. The prospects and progress for scalable commercialization of protein polymers are reviewed, discussing both technology needs and opportunities.

  7. Combination solar photovoltaic heat engine energy converter

    Science.gov (United States)

    Chubb, Donald L.

    1987-01-01

    A combination solar photovoltaic heat engine converter is proposed. Such a system is suitable for either terrestrial or space power applications. The combination system has a higher efficiency than either the photovoltaic array or the heat engine alone can attain. Advantages in concentrator and radiator area and receiver mass of the photovoltaic heat engine system over a heat-engine-only system are estimated. A mass and area comparison between the proposed space station organic Rankine power system and a combination PV-heat engine system is made. The critical problem for the proposed converter is the necessity for high temperature photovoltaic array operation. Estimates of the required photovoltaic temperature are presented.

  8. INSTRUMENTAL CONCEPTUALIZATION SUBJECT AREA SOCIOLOGY: SOME POSSIBLE SOLUTIONS

    Directory of Open Access Journals (Sweden)

    E. V. Maslennikov

    2016-01-01

    Full Text Available The article outlines some of the possible ways of integrating the deployment tool conceptualizing domains of sociology on the basis of the machine sets of steps3. Substantiates the urgency of the problem of application of structural constructs of mathematics as a structure-formalism domain of sociology as a combination of theoretical knowledge. Formulated understanding of the sociological dimension in a broad sense of the concept of research as a measurement based on the use of instrumental in conceptualizing the methodology of sociological research. Under instrumental conceptualization refers to the construction of complex conceptual (conceptual schema structurally interconnected relationships between their individual elements, which are the units of the consideration related conceptual integrity, derived from interpretation of the properties “Set” construct. The paper proposes a definition based on the properties set in the scale set by the structure of N. Bourbaki4 relations systems in the data sets under the structural dimension of social phenomena to understand the interpretation of the investigated properties of social phenomena in terms of a construct that lies at the basis of the theoretical model that reflects the diversity of these qualities with the help of conceptual schemes that determine the quality of each as a structure of relations systems (ie, property in these qualities. In conclusion, the article lists presented in a number of publications, some preliminary results of the application of the methodology of conceptualizing instrumental in related disciplines from sociology. These works can perform suggestive role in the knowledge and understanding of methods of problem fields and objectives of the work on the conceptualization of theoretical sociology, using the mathematical theory of forms. 

  9. Characteristics of Open Access Journals in Six Subject Areas

    Science.gov (United States)

    Walters, William H.; Linvill, Anne C.

    2011-01-01

    We examine the characteristics of 663 Open Access (OA) journals in biology, computer science, economics, history, medicine, and psychology, then compare the OA journals with impact factors to comparable subscription journals. There is great variation in the size of OA journals; the largest publishes more than 2,700 articles per year, but half…

  10. Occupational Listings Arranged by Cluster and Subject Matter Areas.

    Science.gov (United States)

    Schwarz, Otto

    Approximately 850 occupations are listed under 27 occupational clusters. The Dictionary of Occupational Title (DOT) number is specified for occupations in the clusters of business training and distributive education, chemistry, general shop and industrial arts, home economics, foreign language, music, social studies, art, agriculture, physics, and…

  11. School Librarians Teach Subject Area 10: Computer and Information Sciences

    Science.gov (United States)

    Dow, Mirah J. Ingram

    2010-01-01

    School librarians currently speak about school libraries as the largest classroom in the building. If so, how can these librarians describe what they teach? This article explains the user-centered instructional role of secondary school librarians in teaching information and technology literacy skills, as well as how they can authoritatively ensure…

  12. Engineering Change Management Method Framework in Mechanical Engineering

    Science.gov (United States)

    Stekolschik, Alexander

    2016-11-01

    Engineering changes make an impact on different process chains in and outside the company, and lead to most error costs and time shifts. In fact, 30 to 50 per cent of development costs result from technical changes. Controlling engineering change processes can help us to avoid errors and risks, and contribute to cost optimization and a shorter time to market. This paper presents a method framework for controlling engineering changes at mechanical engineering companies. The developed classification of engineering changes and accordingly process requirements build the basis for the method framework. The developed method framework comprises two main areas: special data objects managed in different engineering IT tools and process framework. Objects from both areas are building blocks that can be selected to the overall business process based on the engineering process type and change classification. The process framework contains steps for the creation of change objects (both for overall change and for parts), change implementation, and release. Companies can select singleprocess building blocks from the framework, depending on the product development process and change impact. The developed change framework has been implemented at a division (10,000 employees) of a big German mechanical engineering company.

  13. Guidelines for integrating ecological and biological engineering technologies for control of severe erosion in mountainous areas – A case study of the Xiaojiang River Basin, China

    Directory of Open Access Journals (Sweden)

    Songtang He

    2017-12-01

    Full Text Available Ecological environment issues caused by soil erosion have always been the attractive and significant problems all over the world. Under the background of global warming, debris flow, landslide, and other intense gravitational erosion activities have become aggravated, which leads to the decrease of biological diversity, ecosystem stability, resistance, productivity, and the like, which presents new challenges to traditional measures of soil and water conservation. This article, based on research conducted on controlling mountain hazard on the Xiaojiang River basin over the last 30 years, summarizes the managerial achievement of typical ecological engineering technologies and analyzes the principles and application of each type of treatment. The results indicated that established ecological engineering technologies play a significant role in the prevention and treatment of intense gravitational erosion caused by mountain hazard. However, there are still a great deal of limitation of application condition and maneuverability during management process. How to furtherly develop the rational combining pattern between ecological engineering (e.g. contour hedgerow and geotechnical engineering (e.g. slit dam and how to strengthen the risk control and improve management strategy will be the key points for preventing intense gravitational erosion in future by ecological engineering. Keywords: Soil and water conservation, Ecological engineering, Gravitational erosion, Risk control, Mountain hazards

  14. Introduction to rocket science and engineering

    CERN Document Server

    Taylor, Travis S

    2009-01-01

    What Are Rockets? The History of RocketsRockets of the Modern EraRocket Anatomy and NomenclatureWhy Are Rockets Needed? Missions and PayloadsTrajectoriesOrbitsOrbit Changes and ManeuversBallistic Missile TrajectoriesHow Do Rockets Work? ThrustSpecific ImpulseWeight Flow RateTsiolkovsky's Rocket EquationStagingRocket Dynamics, Guidance, and ControlHow Do Rocket Engines Work? The Basic Rocket EngineThermodynamic Expansion and the Rocket NozzleExit VelocityRocket Engine Area Ratio and LengthsRocket Engine Design ExampleAre All Rockets the Same? Solid Rocket EnginesLiquid Propellant Rocket Engines

  15. Subject (of documents)

    DEFF Research Database (Denmark)

    Hjørland, Birger

    2017-01-01

    such as concepts, aboutness, topic, isness and ofness are also briefly presented. The conclusion is that the most fruitful way of defining “subject” (of a document) is the documents informative or epistemological potentials, that is, the documents potentials of informing users and advance the development......This article presents and discuss the concept “subject” or subject matter (of documents) as it has been examined in library and information science (LIS) for more than 100 years. Different theoretical positions are outlined and it is found that the most important distinction is between document......-oriented views versus request-oriented views. The document-oriented view conceive subject as something inherent in documents, whereas the request-oriented view (or the policy based view) understand subject as an attribution made to documents in order to facilitate certain uses of them. Related concepts...

  16. Unique Education and Workforce Development for NASA Engineers

    Science.gov (United States)

    Forsgren, Roger C.; Miller, Lauren L.

    2010-01-01

    NASA engineers are some of the world's best-educated graduates, responsible for technically complex, highly significant scientific programs. Even though these professionals are highly proficient in traditional analytical competencies, there is a unique opportunity to offer continuing education that further enhances their overall scientific minds. With a goal of maintaining the Agency's passionate, "best in class" engineering workforce, the NASA Academy of Program/Project & Engineering Leadership (APPEL) provides educational resources encouraging foundational learning, professional development, and knowledge sharing. NASA APPEL is currently partnering with the scientific community's most respected subject matter experts to expand its engineering curriculum beyond the analytics and specialized subsystems in the areas of: understanding NASA's overall vision and its fundamental basis, and the Agency initiatives supporting them; sharing NASA's vast reservoir of engineering experience, wisdom, and lessons learned; and innovatively designing hardware for manufacturability, assembly, and servicing. It takes collaboration and innovation to educate an organization that possesses such a rich and important historyand a future that is of great global interest. NASA APPEL strives to intellectually nurture the Agency's technical professionals, build its capacity for future performance, and exemplify its core valuesalJ to better enable NASA to meet its strategic visionand beyond.

  17. Science of the subjective.

    Science.gov (United States)

    Jahn, R G; Dunne, B J

    2007-01-01

    Over the greater portion of its long scholarly history, the particular form of human observation, reasoning, and technical deployment we properly term "science" has relied at least as much on subjective experience and inspiration as it has on objective experiments and theories. Only over the past few centuries has subjectivity been progressively excluded from the practice of science, leaving an essentially secular analytical paradigm. Quite recently, however, a compounding constellation of newly inexplicable physical evidence, coupled with a growing scholarly interest in the nature and capability of human consciousness, are beginning to suggest that this sterilization of science may have been excessive and could ultimately limit its epistemological reach and cultural relevance. In particular, an array of demonstrable consciousness-related anomalous physical phenomena, a persistent pattern of biological and medical anomalies, systematic studies of mind/brain relationships and the mechanics of human creativity, and a burgeoning catalogue of human factors effects within contemporary information processing technologies, all display empirical correlations with subjective aspects that greatly complicate, and in many cases preclude, their comprehension on strictly objective grounds. However, any disciplined re-admission of subjective elements into rigorous scientific methodology will hinge on the precision with which they can be defined, measured, and represented, and on the resilience of established scientific techniques to their inclusion. For example, any neo-subjective science, while retaining the logical rigor, empirical/theoretical dialogue, and cultural purpose of its rigidly objective predecessor, would have the following requirements: acknowledgment of a proactive role for human consciousness; more explicit and profound use of interdisciplinary metaphors; more generous interpretations of measurability, replicability, and resonance; a reduction of ontological

  18. International Civil and Infrastructure Engineering Conference 2013

    CERN Document Server

    Yusoff, Marina; Ismail, Zulhabri; Amin, Norliyati; Fadzil, Mohd

    2014-01-01

    The special focus of this proceedings is to cover the areas of infrastructure engineering and sustainability management. The state-of-the art information in infrastructure and sustainable issues in engineering covers earthquake, bioremediation, synergistic management, timber engineering, flood management and intelligent transport systems. It provides precise information with regards to innovative research development in construction materials and structures in addition to a compilation of interdisciplinary finding combining nano-materials and engineering.

  19. International Civil and Infrastructure Engineering Conference 2014

    CERN Document Server

    Yusoff, Marina; Alisibramulisi, Anizahyati; Amin, Norliyati; Ismail, Zulhabri

    2015-01-01

    The special focus of this proceedings is to cover the areas of infrastructure engineering and sustainability management. The state-of-the art information in infrastructure and sustainable issues in engineering covers earthquake, bioremediation, synergistic management, timber engineering, flood management and intelligent transport systems. It provides precise information with regards to innovative research development in construction materials and structures in addition to a compilation of interdisciplinary finding combining nano-materials and engineering.

  20. The Second Colloquium on Petroleum Engineering Education

    Energy Technology Data Exchange (ETDEWEB)

    Willhite, G.P.; Forney, R.H.

    1993-11-30

    This paper describes findings from the Second Colloquium on Petroleum engineering Education. The purpose of this colloquium was to provide a forum for petroleum engineering educators and representatives from industry and government to explore critical issues facing petroleum engineering education as we move into the 21st Century. It was expected that the colloquium would identify areas where changes are needed in petroleum engineering education, to best prepare students for careers in the oil and gas industry or other, related industries.

  1. Innovations in Computing Sciences and Software Engineering

    CERN Document Server

    Sobh, Tarek

    2010-01-01

    "Innovations in Computing Sciences and Software Engineering" includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the areas of Computer Science, Software Engineering, Computer Engineering, and Systems Engineering and Sciences. The topics covered include: Image and Pattern Recognition: Compression, Image processing, Signal Processing Architectures, Signal Processing for Communication, Signal Processing Implementation, Speech Compression, and Video Coding Architectures; Languages and Systems: Algorithms, Databases,

  2. DENTAL PULP TISSUE ENGINEERING

    Science.gov (United States)

    Demarco, FF; Conde, MCM; Cavalcanti, B; Casagrande, L; Sakai, V; Nör, JE

    2013-01-01

    Dental pulp is a highly specialized mesenchymal tissue, which have a restrict regeneration capacity due to anatomical arrangement and post-mitotic nature of odontoblastic cells. Entire pulp amputation followed by pulp-space disinfection and filling with an artificial material cause loss of a significant amount of dentin leaving as life-lasting sequelae a non-vital and weakened tooth. However, regenerative endodontics is an emerging field of modern tissue engineering that demonstrated promising results using stem cells associated with scaffolds and responsive molecules. Thereby, this article will review the most recent endeavors to regenerate pulp tissue based on tissue engineering principles and providing insightful information to readers about the different aspects enrolled in tissue engineering. Here, we speculate that the search for the ideal combination of cells, scaffolds, and morphogenic factors for dental pulp tissue engineering may be extended over future years and result in significant advances in other areas of dental and craniofacial research. The finds collected in our review showed that we are now at a stage in which engineering a complex tissue, such as the dental pulp, is no longer an unachievable and the next decade will certainly be an exciting time for dental and craniofacial research. PMID:21519641

  3. Engineering approaches to immunotherapy.

    Science.gov (United States)

    Swartz, Melody A; Hirosue, Sachiko; Hubbell, Jeffrey A

    2012-08-22

    As the science of immunology grows increasingly mechanistic, motivation for developing quantitative, design-based engineering approaches has also evolved, both for therapeutic interventions and for elucidating immunological pathways in human disease. This has seeded the nascent field of "immunoengineering," which seeks to apply engineering analyses and design approaches to problems in translational immunology. For example, cell engineers are creating ways to tailor and use immune cells as living therapeutics; protein engineers are devising new methods of rapid antibody discovery; biomaterials scientists are guiding vaccine delivery and immune-cell activation with novel constructs; and systems immunologists are deciphering the evolution and maintenance of T and B cell receptor repertoires, which could help guide vaccine design. The field is multidisciplinary and collaborative, with engineers and immunologists working together to better understand and treat disease. We discuss the scientific progress in this young, yet rapidly evolving research area, which has yielded numerous start-up companies that are betting on impact in clinical and commercial translation in the near future.

  4. Fractal engine

    Science.gov (United States)

    Fatemi, Omid; Panchanathan, Sethuraman

    1997-01-01

    Visual media processing is becoming increasingly important because of the wide variety of image and video based applications. Recently, several architectures have been reported in the literature to implement image and video processing algorithms. They range from programmable DSP processors to application specific integrated circuits (ASICs). DSPs have to be software programed to execute individual operations in image and video processing. However they are not suitable for real-time execution of highly compute intensive applications such as fractal block processing (FBP). On the other hand, dedicated architectures and ASICs are designed to implement specific functions. Since they are optimized for a specific task, they cannot be used in a wide variety of applications. In this paper, we propose a parallel and pipelined architecture called fractal engine to implement the operations in FBP. Fractal engine is simple, modular, scaleable and is optimized to execute both low level and mid level operations. We note that implementation of the basic operations by fractal engine enables efficient execution of a majority of visual computing tasks. These include spatial filtering, contrast enhancement, frequency domain operations, histogram calculation, geometric transforms, indexing, vector quantization, fractal block coding, motion estimation, etc. The individual modules of fractal engine have been implemented in VHDL (VHSIC hardware description language). We have chosen to demonstrate the real-time execution capability of fractal engine by mapping a fractal block coding (FBC) algorithm onto the proposed architecture.

  5. Irreversible Brownian Heat Engine

    Science.gov (United States)

    Taye, Mesfin Asfaw

    2017-10-01

    We model a Brownian heat engine as a Brownian particle that hops in a periodic ratchet potential where the ratchet potential is coupled with a linearly decreasing background temperature. We show that the efficiency of such Brownian heat engine approaches the efficiency of endoreversible engine η =1-√{{Tc/Th}} [23]. On the other hand, the maximum power efficiency of the engine approaches η ^{MAX}=1-({Tc/Th})^{1\\over 4}. It is shown that the optimized efficiency always lies between the efficiency at quasistatic limit and the efficiency at maximum power while the efficiency at maximum power is always less than the optimized efficiency since the fast motion of the particle comes at the expense of the energy cost. If the heat exchange at the boundary of the heat baths is included, we show that such a Brownian heat engine has a higher performance when acting as a refrigerator than when operating as a device subjected to a piecewise constant temperature. The role of time on the performance of the motor is also explored via numerical simulations. Our numerical results depict that the time t and the external load dictate the direction of the particle velocity. Moreover, the performance of the heat engine improves with time. At large t (steady state), the velocity, the efficiency and the coefficient of performance of the refrigerator attain their maximum value. Furthermore, we study the effect of temperature by considering a viscous friction that decreases exponentially as the background temperature increases. Our result depicts that the Brownian particle exhibits a fast unidirectional motion when the viscous friction is temperature dependent than that of constant viscous friction. Moreover, the efficiency of this motor is considerably enhanced when the viscous friction is temperature dependent. On the hand, the motor exhibits a higher performance of the refrigerator when the viscous friction is taken to be constant.

  6. The Subjectivity of Participation

    DEFF Research Database (Denmark)

    Nissen, Morten

    What is a 'we' – a collective – and how can we use such communal self-knowledge to help people? This book is about collectivity, participation, and subjectivity – and about the social theories that may help us understand these matters. It also seeks to learn from the innovative practices and ideas...... practices. Through this dialogue, it develops an original trans-disciplinary critical theory and practice of collective subjectivity for which the ongoing construction and overcoming of common sense, or ideology, is central. It also points to ways of relating discourse with agency, and fertilizing insights...... from interactionism and ideology theories in a cultural-historical framework....

  7. The use of participant-observation protocol in an industrial engineering research.

    Science.gov (United States)

    Silveira e Silva, Renato da; Sznelwar, Laerte Idal; D'Afonseca e Silva, Victor

    2012-01-01

    Based on literature, this article aims to present the "participant-observation' research protocol, and its practical application in the industrial engineering field, more specifically within the area of design development, and in the case shown by this article, of interiors' design. The main target is to identify the concept of the method, i.e., from its characteristics to structure a general sense about the subject, so that the protocol can be used in different areas of knowledge, especially those ones which are committed with the scientific research involving the expertise from researchers, and subjective feelings and opinions of the users of an engineering product, and how this knowledge can be benefic for product design, contributing since the earliest stage of design.

  8. Engineering quantum mechanics

    CERN Document Server

    Ahn, Doyeol

    2011-01-01

    A clear introduction to quantum mechanics concepts Quantum mechanics has become an essential tool for modern engineering, particularly due to the recent developments in quantum computing as well as the rapid progress in optoelectronic devices. Engineering Quantum Mechanics explains the fundamentals of this exciting field, providing broad coverage of both traditional areas such as semiconductor and laser physics as well as relatively new yet fast-growing areas such as quantum computation and quantum information technology. The book begins with basic quantum mechanics, reviewing measurements and probability, Dirac formulation, the uncertainty principle, harmonic oscillator, angular momentum eigenstates, and perturbation theory. Then, quantum statistical mechanics is explored, from second quantization and density operators to coherent and squeezed states, coherent interactions between atoms and fields, and the Jaynes-Cummings model. From there, the book moves into elementary and modern applications, discussing s...

  9. Software and Network Engineering

    CERN Document Server

    2012-01-01

    The series "Studies in Computational Intelligence" (SCI) publishes new developments and advances in the various areas of computational intelligence – quickly and with a high quality. The intent is to cover the theory, applications, and design methods of computational intelligence, as embedded in the fields of engineering, computer science, physics and life science, as well as the methodologies behind them. The series contains monographs, lecture notes and edited volumes in computational intelligence spanning the areas of neural networks, connectionist systems, genetic algorithms, evolutionary computation, artificial intelligence, cellular automata, self-organizing systems, soft computing, fuzzy systems, and hybrid intelligent systems. Critical to both contributors and readers are the short publication time and world-wide distribution - this permits a rapid and broad dissemination of research results.   The purpose of the first ACIS International Symposium on Software and Network Engineering held on Decembe...

  10. Engineering Optics

    CERN Document Server

    Iizuka, Keigo

    2008-01-01

    Engineering Optics is a book for students who want to apply their knowledge of optics to engineering problems, as well as for engineering students who want to acquire the basic principles of optics. It covers such important topics as optical signal processing, holography, tomography, holographic radars, fiber optical communication, electro- and acousto-optic devices, and integrated optics (including optical bistability). As a basis for understanding these topics, the first few chapters give easy-to-follow explanations of diffraction theory, Fourier transforms, and geometrical optics. Practical examples, such as the video disk, the Fresnel zone plate, and many more, appear throughout the text, together with numerous solved exercises. There is an entirely new section in this updated edition on 3-D imaging.

  11. Engineering physics

    CERN Document Server

    Mukherji, Uma

    2015-01-01

    ENGINEERING PHYSICS is designed as a textbook for first year engineering students of a two semester course in Applied Physics according to new revised syllabus. However the scope of this book is not only limited to undergraduate engineering students and science students, it can also serve as a reference book for practicing scientists.Advanced technological topics like LCD, Squid, Maglev system, Electron microscopes, MRI, Photonics - Photonic fibre, Nano-particles, CNT, Quantum computing etc., are explained with basic underlying principles of Physics.This text explained following topics with numerous solved, unsolved problems and questions from different angles. Part-I contains crystal structure, Liquid crystal, Thermo-electric effect, Thermionic emission, Ultrasonic, Acoustics, semiconductor and magnetic materials. Whereas Part-2 contains Optics, X-rays, Electron optics, Dielectric materials, Quantum Physics and Schrodinger wave equation, Laser, Fibre-optics and Holography, Radio-activity, Super-conductivity,...

  12. Mechanical engineers' handbook, materials and engineering mechanics

    CERN Document Server

    Kutz, Myer

    2015-01-01

    Full coverage of materials and mechanical design inengineering Mechanical Engineers' Handbook, Fourth Edition provides aquick guide to specialized areas you may encounter in your work,giving you access to the basics of each and pointing you towardtrusted resources for further reading, if needed. The accessibleinformation inside offers discussions, examples, and analyses ofthe topics covered. This first volume covers materials and mechanical design, givingyou accessible and in-depth access to the most common topics you'llencounter in the discipline: carbon and alloy steels, stainlesssteels, a

  13. Tenth workshop on geothermal reservoir engineering: proceedings

    Energy Technology Data Exchange (ETDEWEB)

    1985-01-22

    The workshop contains presentations in the following areas: (1) reservoir engineering research; (2) field development; (3) vapor-dominated systems; (4) the Geysers thermal area; (5) well test analysis; (6) production engineering; (7) reservoir evaluation; (8) geochemistry and injection; (9) numerical simulation; and (10) reservoir physics. (ACR)

  14. Paying Hypertension Research Subjects

    Science.gov (United States)

    Casarett, David; Karlawish, Jason; Asch, David A

    2002-01-01

    CONTEXT Cash payments are often used to compensate subjects who participate in research. However, ethicists have argued that these payments might constitute an undue inducement. OBJECTIVES To determine whether potential subjects agree with theoretical arguments that a payment could be an undue inducement. DESIGN/SETTING/PARTICIPANTS Survey of 350 prospective jurors. MAIN OUTCOME MEASURES Belief that a $500 payment for research participation would impair their own, and others' ability to think carefully about the risks and benefits of a clinical trial. RESULTS Two hundred sixty-one jurors (74.6%) believed that a $500 payment would impair subjects' ability to think carefully about the risks and benefits of research. Ninety-six of 120 (80%) expressed this concern about subjects with a low income ($50,000). In contrast, only 69 (19.7%) of jurors believed that a $500 payment would influence them. Jurors who believed that this payment would influence them reported lower incomes and less education. CONCLUSION Members of the general public share ethical concerns about the influence of payments for research, although they believe that these concerns are more applicable to others than to themselves.

  15. Subjects, Models, Languages, Transformations

    NARCIS (Netherlands)

    Rensink, Arend; Bézivin, J.; Heckel, R.

    2005-01-01

    Discussions about model-driven approaches tend to be hampered by terminological confusion. This is at least partially caused by a lack of formal precision in defining the basic concepts, including that of "model" and "thing being modelled" - which we call subject in this paper. We propose a minimal

  16. Subjective Duration and Psychophysics

    Science.gov (United States)

    Eisler, Hannes

    1975-01-01

    Three models are proposed to describe the strategy applied by a subject when he is confronted with two successive time intervals and is required to deal with some relation between them, for example, by telling which was the longer by adjusting the second to match the first. (Author)

  17. Barron's SAT subject test

    CERN Document Server

    Jansen, MA, Robert

    2016-01-01

    Includes one diagnostic test and three complete tests, all questions answered and explained, self-assessment guides, and subject reviews. Also features test strategies, QR codes to short instructional videos, and a detailed appendix with equations, physical constants, and a basic math review.

  18. CONTRIBUTION OF THE SUBJECT POLITICAL ECONOMY OF CAPITALISM TO THE TRAINING IN STS FORMATION OF THE ENGINEER IN COMPUTER SCIENCES / CONTRIBUCIÓN DE LA ASIGNATURA ECONOMÍA POLÍTICA DEL CAPITALISMO A LA FORMACIÓN CTS DEL INGENIERO EN CIENCIAS INFORMÁTICAS

    Directory of Open Access Journals (Sweden)

    Álvaro González Díaz

    2013-07-01

    Full Text Available This work takes as its starting point a social vision of science and technology, the two latter being considered as socio-economic phenomena which interrelate and complement each other at the same time they uncover and improve the real relations between them and society. On this ground, it is justified the need of assessing the contribution of Politic Economics of Capitalism to the formation in Science, Technology and Society. Within the framework of the pedagogical innovation project, “Strategy for integrating Formation-Production-Investigation”, developed in School 6, an answer was given to this problem of the University of Informatics Sciences: How to contribute to the formation on science, technology and society of the Informatics engineer in the University of Informatics Sciences from the syllabus of Politic Economics of Capitalism. The solution to the identified scientific problem was offered through a redesigning action; it was evaluated the feasibility of the performed modifications by different methods and procedures with professors of the subject and students of the group used as a case study.

  19. Engineering tribology

    CERN Document Server

    Stachowiak, Gwidon

    2014-01-01

    Engineering Tribology, 4th Edition is an established introductory reference focusing on the key concepts and engineering implications of tribology. Taking an interdisciplinary view, the book brings together the relevant knowledge from different fields needed to achieve effective analysis and control of friction and wear. Updated to cover recent advances in tribology, this new edition includes new sections on ionic and mesogenic lubricants, surface texturing, and multiscale characterization of 3D surfaces and coatings. Current trends in nanotribology are discussed, such as those relating to

  20. Micro Engineering

    DEFF Research Database (Denmark)

    Alting, Leo; Kimura, F.; Hansen, Hans Nørgaard

    2003-01-01

    The paper addresses the questions of how micro products are designed and how they are manufactured. Definitions of micro products and micro engineering are discussed and the presentation is aimed at describing typical issues, possibilities and tools regarding design of micro products. The implica......The paper addresses the questions of how micro products are designed and how they are manufactured. Definitions of micro products and micro engineering are discussed and the presentation is aimed at describing typical issues, possibilities and tools regarding design of micro products...

  1. Software Engineering and Knowledge Engineering Theory and Practice Volume 2

    CERN Document Server

    2012-01-01

    The volume includes a set of selected papers extended and revised from the I2009 Pacific-Asia Conference on Knowledge Engineering and Software Engineering (KESE 2009) was held on December 19~ 20, 2009, Shenzhen, China.   Volume 2 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of Knowledge Engineering and Communication Technology to disseminate their latest research results and exchange views on the future research directions of these fields. 135 high-quality papers are included in the volume. Each paper has been peer-reviewed by at least 2 program committee members and selected by the volume editor Prof.Yanwen Wu.   On behalf of the this volume, we would like to express our sincere appreciation to all of authors and referees for their efforts reviewing the papers. Hoping you can find lots of profound research ideas and results on the related fields of Knowledge Engineering and Communication Technology. 

  2. Engineering fluid mechanics

    CERN Document Server

    Yamaguchi, Hiroshi

    2008-01-01

    This book is intended to serve as a unique and comprehensive textbook for scientists and engineers as well as advanced students in thermo-fluid courses. It provides an intensive monograph essential for understanding dynamics of ideal fluid, Newtonian fluid, non-Newtonian fluid and magnetic fluid. These distinct, yet intertwined subjects are addressed in an integrated manner. It starts with coherent treatment of fundamental continuum mechanics, with an emphasis on the intrinsic angular momentum, by which the concepts of ferrohydrodynamics are progressively built up, and serve as a foundation for later development. Flows of ideal and Newtonian fluids are followed by a detailed presentation of basic continuum equations for applications of fluid engineering, which cover the design and operations of various turbomachines, heat exchangers and flow elements. The study of the deformation and flow of matter, namely rheology, is discussed primarily with regard to the stresses generated during the flow of complex materi...

  3. [Subjective cognition in schizophrenia].

    Science.gov (United States)

    Potvin, S; Aubin, G; Stip, E

    2017-02-01

    Given the extent, magnitude and functional significance of the neurocognitive deficits of schizophrenia, growing attention has been paid recently to patients' self-awareness of their own deficits. Thus far, the literature has shown either that patients fail to recognize their cognitive deficits or that the association between subjective and objective cognition is weak in schizophrenia. The reasons for this lack of consistency remain unexplained but may have to do, among others, with the influence of potential confounding clinical variables and the choice of the scale used to measure self-awareness of cognitive deficits. In the current study, we sought to examine the relationships between subjective and objective cognitive performance in schizophrenia, while controlling for the influence of sociodemographic and psychiatric variables. Eighty-two patients with a schizophrenia-spectrum disorder (DSM-IV criteria) were recruited. Patients' subjective cognitive complaints were evaluated with the Subjective Scale to Investigate Cognition in Schizophrenia (SSTICS), the most frequently used scale to measure self-awareness of cognitive deficits in schizophrenia. Neurocognition was evaluated with working memory, planning and visual learning tasks taken from Cambridge Neuropsychological Tests Automated Battery. The Stroop Color-Word test was also administered. Psychiatric symptoms were evaluated with the Positive and Negative Syndrome Scale and the Calgary Depression Scale for Schizophrenia. The relationships between subjective and objective cognition were evaluated with multivariate hierarchic linear regression analyses, taking into consideration potential confounders such as sociodemographic and psychiatric variables. Finally, a factor analysis of the SSTICS was performed. For the SSTICS total score, the regression analysis produced a model including two predictors, namely visual learning and Stoop interference performance, explaining a moderate portion of the variance

  4. Combustion engineering

    CERN Document Server

    Ragland, Kenneth W

    2011-01-01

    Introduction to Combustion Engineering The Nature of Combustion Combustion Emissions Global Climate Change Sustainability World Energy Production Structure of the Book   Section I: Basic Concepts Fuels Gaseous Fuels Liquid Fuels Solid Fuels Problems Thermodynamics of Combustion Review of First Law Concepts Properties of Mixtures Combustion StoichiometryChemical EnergyChemical EquilibriumAdiabatic Flame TemperatureChemical Kinetics of CombustionElementary ReactionsChain ReactionsGlobal ReactionsNitric Oxide KineticsReactions at a Solid SurfaceProblemsReferences  Section II: Combustion of Gaseous and Vaporized FuelsFlamesLaminar Premixed FlamesLaminar Flame TheoryTurbulent Premixed FlamesExplosion LimitsDiffusion FlamesGas-Fired Furnaces and BoilersEnergy Balance and EfficiencyFuel SubstitutionResidential Gas BurnersIndustrial Gas BurnersUtility Gas BurnersLow Swirl Gas BurnersPremixed-Charge Engine CombustionIntroduction to the Spark Ignition EngineEngine EfficiencyOne-Zone Model of Combustion in a Piston-...

  5. Metabolic Engineering

    Indian Academy of Sciences (India)

    IAS Admin

    processes such as generation of energy, production of fundamen- tal building blocks required for structural organization and syn- thesis of biomolecules having specialized functions. ... Symbiosis International. University, Pune. His research interests are in metabolic engineering of lactic acid bacteria for increasing their.

  6. Harmonic engine

    Science.gov (United States)

    Bennett, Charles L.; Sewall, Noel; Boroa, Carl

    2014-08-19

    An engine based on a reciprocating piston engine that extracts work from pressurized working fluid. The engine includes a harmonic oscillator inlet valve capable of oscillating at a resonant frequency for controlling the flow of working fluid into of the engine. In particular, the inlet valve includes an inlet valve head and a spring arranged together as a harmonic oscillator so that the inlet valve head is moveable from an unbiased equilibrium position to a biased closed position occluding an inlet. Upon releasing the inlet valve the inlet valve head undergoes a single oscillation past the equilibrium positio to a maximum open position and returns to a biased return position close to the closed position to choke the flow and produce a pressure drop across the inlet valve causing the inlet valve to close. Protrusions carried either by the inlet valve head or piston head are used to bump open the inlet valve from the closed position and initiate the single oscillation of the inlet valve head, and protrusions carried either by the outlet valve head or piston head are used to close the outlet valve ahead of the bump opening of the inlet valve.

  7. Exhibit Engineering

    DEFF Research Database (Denmark)

    Mortensen, Marianne Foss

    ) a synthesis of the findings from the first two studies with findings from the literature to generate two types of results: a coherent series of suggestions for a design iteration of the studied exhibit as well as a more general normative model for exhibit engineering. Finally, another perspective...

  8. Study of advanced professional educational requirements relative to nuclear fuel cycle engineering in industry and government. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Jur, T.A.; Huhns, M.N.; Keating, D.A.; Orloff, D.I.; Rhodes, C.A.; Stanford, T.G.; Stephens, L.M.; Tatterson, G.B.; Van Brunt, V.

    1978-12-01

    An assessment was conducted of educational needs among engineers working in nuclear fuel cycle-related areas, focusing on the nuclear industry in the Southeast. Educational needs addressed were those at the post-baccalaureate professional level. As a result of the study, a list of subject areas has been compiled as best representing the current content of an educational program. In addition to identifying subject areas, a set of course descriptions and reference materials has been developed around each subject. Each course description contains information regarding objectives, anticipated audience, and prerequisites and offers a suggested course outline. An initial modest program of implementation is recommended which would continue to concentrate on the Southeast as a target area.

  9. Soft computing techniques in engineering applications

    CERN Document Server

    Zhong, Baojiang

    2014-01-01

    The Soft Computing techniques, which are based on the information processing of biological systems are now massively used in the area of pattern recognition, making prediction & planning, as well as acting on the environment. Ideally speaking, soft computing is not a subject of homogeneous concepts and techniques; rather, it is an amalgamation of distinct methods that confirms to its guiding principle. At present, the main aim of soft computing is to exploit the tolerance for imprecision and uncertainty to achieve tractability, robustness and low solutions cost. The principal constituents of soft computing techniques are probabilistic reasoning, fuzzy logic, neuro-computing, genetic algorithms, belief networks, chaotic systems, as well as learning theory. This book covers contributions from various authors to demonstrate the use of soft computing techniques in various applications of engineering.  

  10. Interaction, transference, and subjectivity

    DEFF Research Database (Denmark)

    Lundgaard Andersen, Linda

    2012-01-01

    Fieldwork is one of the important methods in educational, social, and organisational research. In fieldwork, the researcher takes residence for a shorter or longer period amongst the subjects and settings to be studied. The aim of this is to study the culture of people: how people seem to make...... sense of their lives and which moral, professional, and ethical values seem to guide their behaviour and attitudes. In fieldwork, the researcher has to balance participation and observation in her attempts at representation. Consequently, the researcher’s academic and life-historical subjectivity...... are important filters for fieldwork. In general, fieldwork can be understood as processes where field reports and field analysis are determined by how the researcher interacts with and experiences the field, the events and informants in it, and how she subsequently develops an ethnography. However, fieldwork...

  11. Writing and the 'Subject'

    DEFF Research Database (Denmark)

    Greve, Charlotte

    /reading subject) manifests itself in the material mark on the page. The study shows how this indexical reference to a ‘subject’ is manipulated and used as a mask through which a writer/painter can perform a certain ‘subject’. Through analyses of the various levels on which the ‘subject’ is represented...... in the early as well as the contemporary avant-garde, it becomes clear that the ‘subject’ is an unstable category that can be exposed to manipulation and play. Handwriting is performing as a signature (as an index), but is at the same time similar to the signature of a subject (an icon) and a verbal construct...

  12. Sustainability in Chemical Engineering Curriculum

    Science.gov (United States)

    Glassey, Jarka; Haile, Sue

    2012-01-01

    Purpose: The purpose of this paper is to describe a concentrated strategy to embed sustainability teaching into a (chemical) engineering undergraduate curriculum throughout the whole programme. Innovative teaching approaches in subject-specific context are described and their efficiency investigated. Design/methodology/approach: The activities in…

  13. Sustainability issues in civil engineering

    CERN Document Server

    Saride, Sireesh; Basha, B

    2017-01-01

    This compilation on sustainability issues in civil engineering comprises contributions from international experts who have been working in the area of sustainability in civil engineering. Many of the contributions have been presented as keynote lectures at the International Conference on Sustainable Civil Infrastructure (ICSCI) held in Hyderabad, India. The book has been divided into core themes of Sustainable Transportation Systems, Sustainable Geosystems, Sustainable Environmental and Water Resources and Sustainable Structural Systems. Use of sustainability principles in engineering has become an important component of the process of design and in this context, design and analysis approaches in civil engineering are being reexamined to incorporate the principles of sustainable designs and construction in practice. Developing economies are on the threshold of rapid infrastructure growth and there is a need to compile the developments in various branches of civil engineering and highlight the issues. It is th...

  14. Probability and Statistics in Aerospace Engineering

    Science.gov (United States)

    Rheinfurth, M. H.; Howell, L. W.

    1998-01-01

    This monograph was prepared to give the practicing engineer a clear understanding of probability and statistics with special consideration to problems frequently encountered in aerospace engineering. It is conceived to be both a desktop reference and a refresher for aerospace engineers in government and industry. It could also be used as a supplement to standard texts for in-house training courses on the subject.

  15. Bridge engineering handbook construction and maintenance

    CERN Document Server

    Chen, Wai-Fah

    2014-01-01

    Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection highlights bridge engineering specimens from around the world, contains detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject.Published in five books: Fundamentals, Superstructure Design, Substructure Design, Seismic Design, and Construction and Maintenance, this new edition provides numerous worked-out examples that give readers step-by-step design procedures, includes c

  16. Teaching and Learning in Chemical Product Engineering - an Evolving par of the Chemical Engineering Curriculum

    DEFF Research Database (Denmark)

    Vigild, Martin Etchells; Kiil, Søren; Wesselingh, Johannes

    2007-01-01

    Over the last decade Chemical Product Engineering has evolved as part of the Chemical Engineering Curriculum at several universities in Europe and America. At the DTU Chemical Product Engineering was introduced in 2000. This presentation will report on the experiences gained from teaching classes...... and preparing a text book on the subject. [1] Chemical Product Engineering is solidly based on chemical technical and engineering knowledge. Furthermore, the subject naturally calls for a holistic approach to teaching and learning and introduces elements which target transferable and professional engineering...... skills. Such skills are important in Chemical Product Engineering when dealing with open-ended problems, creative problem solutions, operating in a team working environment and exercising project management. In our course we emphasise team activites, formative feed back to the students as well as helping...

  17. Solid-state laser engineering

    CERN Document Server

    Koechner, Walter

    1992-01-01

    This book is written from an industrial perspective and provides a detailed discussion of solid-state lasers, their characteristics, design and construction. Emphasis is placed on engineering and practical considerations. The book is aimed mainly at the practicing scientist or engineer who is interested in the design or use of solid-state lasers, but the comprehensive treatment of the subject will make the work useful also to students of laser physics who seek to supplement their theoretical knowledge with engineering information. In order to present the subject as clearly as possible, phenomenological descriptions using models have been used rather than abstract mathematical descriptions. This results in a simplified presentation. The descriptions are enhanced by the inclusion of numerical and technical data, tables and graphs. This new edition has been updated and revised to take account of important new developments, concepts, and technologies that have emerged since the publication of the first and second...

  18. Enhancing Engineering Education through Engineering Management

    Science.gov (United States)

    Pence, Kenneth R.; Rowe, Christopher J.

    2012-01-01

    Engineering Management courses are added to a traditional engineering curriculum to enhance the value of an undergraduate's engineering degree. A four-year engineering degree often leaves graduates lacking in business and management acumen. Engineering management education covers topics enhancing the value of new graduates by teaching management…

  19. Engineering mathematics-II

    CERN Document Server

    Ganesh, A

    2009-01-01

    About the Book: This book Engineering Mathematics-II is designed as a self-contained, comprehensive classroom text for the second semester B.E. Classes of Visveswaraiah Technological University as per the Revised new Syllabus. The topics included are Differential Calculus, Integral Calculus and Vector Integration, Differential Equations and Laplace Transforms. The book is written in a simple way and is accompanied with explanatory figures. All this make the students enjoy the subject while they learn. Inclusion of selected exercises and problems make the book educational in nature. It shou

  20. Systems Engineering, Quality and Testing

    Science.gov (United States)

    Shepherd, Christena C.

    2015-01-01

    AS9100 has little to say about how to apply a Quality Management System (QMS) to aerospace test programs. There is little in the quality engineering Body of Knowledge that applies to testing, unless it is nondestructive examination or some type of lab or bench testing. If one examines how the systems engineering processes are implemented throughout a test program; and how these processes can be mapped to AS9100, a number of areas for involvement of the quality professional are revealed.