WorldWideScience

Sample records for subaru telescope operated

  1. Metrology camera system of prime focus spectrograph for Subaru telescope

    Science.gov (United States)

    Wang, Shiang-Yu; Chou, Chueh-Yi; Chang, Yin-Chang; Huang, Pin-Jie; Hu, Yen-Sang; Chen, Hsin-Yo; Tamura, Naoyuki; Takato, Naruhisa; Ling, Hung-Hsu; Gunn, James E.; Karr, Jennifer; Yan, Chi-Hung; Mao, Peter; Ohyama, Youichi; Karoji, Hiroshi; Sugai, Hajime; Shimono, Atsushi

    2014-07-01

    The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. The metrology camera system of PFS serves as the optical encoder of the COBRA fiber motors for the configuring of fibers. The 380mm diameter aperture metrology camera will locate at the Cassegrain focus of Subaru telescope to cover the whole focal plane with one 50M pixel Canon CMOS sensor. The metrology camera is designed to provide the fiber position information within 5μm error over the 45cm focal plane. The positions of all fibers can be obtained within 1s after the exposure is finished. This enables the overall fiber configuration to be less than 2 minutes.

  2. Direct Explorations of Exoplanets with the Subaru Telescope and Beyond

    Science.gov (United States)

    Tamura, Motohide; Abe, Lyu

    We present a Japanese "roadmap" on direct extrasolar planet studies spanning from the current ground-based telescope to future IR/Opt space-based telescopes. Several searches for young planets and disks have been conducted with the Subaru 8.2m telescope with adaptive optics (AO) infrared coronagraph, CIAO. The instrument will be soon upgraded to a new AO and a coronagraph with simultaneous spectral and polarimetric differential imaging modes (HiCIAO), which will significantly improve the contrast performance and hence the capability of young planet detection. A sensitive unbiased survey for extrasolar zodiacal emission around nearby stars will be conducted with the ASTRO-F space mission (0.7m telescope, ˜2-200 μm) to be launched around the beginning of 2006. A successor space mission, SPICA (3.5m, 5-200 μm), is also planned; its high sensitivity will enable the detection and characterization of outer-most planets around nearby stars, if any. For the studies of extrasolar terrestrial planets, a high contrast space telescope (HCST; 3.5m, ˜0.3-2 μm). We are also seeking for collaborations with or are considering to join to foreign missions. We describe an outline, status, and role of each project on the extrasolar planet studies.

  3. Tracking Publications Based on Telescope Sharing among Gemini, Subaru, and Keck: An Update

    Science.gov (United States)

    Zhang, X.; Tsang, E.; Kamisato, P.

    2015-04-01

    Gemini Observatory, Subaru Telescope, and Keck Observatory collectively operate five 8-10 meters telescopes on the summit of Mauna Kea on the Island of Hawaii and at Cerro Pachon in Chile. The three institutions began a telescope exchange program in 2005 to expand the range of backend instruments available to their respective users. A participating observatory's users can apply for telescope time from the other two observatories through the time exchange program. To measure the success of the program, we collected publications that resulted from the exchange program for the period from 2005 to 2013. Bibliometric analysis was performed on these publications to measure the productivity and impact of the exchange program. This is an enhanced and updated version of the paper presented at the IAU Commission 5 working Group Libraries session in Beijing, 2012.

  4. Developing Engineering Model Cobra fiber positioners for the Subaru Telescope Prime Focus Spectrometer

    OpenAIRE

    Fisher, Charles; Morantz, Chaz; Braun, David; Seiffert, Michael; Aghazarian, Hrand; Partos, Eamon; King, Matthew; Hovland, Larry; Schwochert, Mark; Kaluzny, Joel; Capocasale, Christopher; Houck, Andrew; Gross, Johannes; Reiley, Dan; Mao, Peter

    2014-01-01

    The Cobra fiber positioner is being developed by the California Institute of Technology (CIT) and the Jet Propulsion Laboratory (JPL) for the Prime Focus Spectrograph (PFS) instrument that will be installed at the Subaru Telescope on Mauna Kea, Hawaii. PFS is a fiber fed multi-object spectrometer that uses an array of Cobra fiber positioners to rapidly reconfigure 2394 optical fibers at the prime focus of the Subaru Telescope that are capable of positioning a fiber to within 5um of a specifie...

  5. Developing Engineering Model Cobra fiber positioners for the Subaru Telescope's Prime Focus Spectrometer

    OpenAIRE

    Fisher, Charles; Morantz, Chaz; Braun, David; Seiffert, Michael; Aghazarian, Hrand; Partos, Eamon; King, Matthew; Hovland, Larry; Schwochert, Mark; Kaluzny, Joel; Capocasale, Christopher; Houck, Andrew; Gross, Johannes; Reiley, Dan; Mao, Peter

    2014-01-01

    The Cobra fiber positioner is being developed by the California Institute of Technology (CIT) and the Jet Propulsion Laboratory (JPL) for the Prime Focus Spectrograph (PFS) instrument that will be installed at the Subaru Telescope on Mauna Kea, Hawaii. PFS is a fiber fed multi-object spectrometer that uses an array of Cobra fiber positioners to rapidly reconfigure 2394 optical fibers at the prime focus of the Subaru Telescope that are capable of positioning a fiber to within 5μm of a specifie...

  6. Development in High-Density Cobra Fiber Positioners for the Subaru Telescope's Prime Focus Spectrometer

    Science.gov (United States)

    Fisher, Charles D.; Braun, David F.; Kaluzny, Joel V.; Seiffert, Mic D.; Dekany, Richard G.; Ellis, Richard S.; Smith, Roger S.

    2012-01-01

    The Prime Focus Spectrograph (PFS) is a fiber fed multi-object spectrometer for the Subaru Telescope that will conduct a variety of targeted surveys for studies of dark energy, galaxy evolution, and galactic archaeology. The key to the instrument is a high density array of fiber positioners placed at the prime focus of the Subaru Telescope. The system, nicknamed "Cobra", will be capable of rapidly reconfiguring the array of 2394 optical fibers to the image positions of astronomical targets in the focal plane with high accuracy. The system uses 2394 individual "SCARA robot" mechanisms that are 7.7mm in diameter and use 2 piezo-electric rotary motors to individually position each of the optical fibers within its patrol region. Testing demonstrates that the Cobra positioner can be moved to within 5 micrometers of an astronomical target in 6 move iterations with a success rate of 95%. The Cobra system is a key aspect of PFS that will enable its unprecedented combination of high-multiplex factor and observing efficiency on the Subaru telescope. The requirements, design, and prototyping efforts for the fiber positioner system for the PFS are described here as are the plans for modular construction, assembly, integration, functional testing, and performance validation.

  7. A lightweight fault-tolerant middleware for a Subaru Telescope second generation observation control system

    Science.gov (United States)

    Jeschke, Eric; Bon, Bruce; Inagaki, Takeshi; Streeper, Sam

    2008-08-01

    Subaru Telescope is developing a second-generation Observation Control System that specifically addresses some of the deficiencies of the current Subaru OCS. Two areas of concern are complexity and failure handling. The current system has over 1000 dedicated OCS processes spread across a dozen hosts and provides nothing in the way of automated failover. Furthermore, manual failover is so fraught with difficulty that it is rarely attempted. Our Generation 2 OCS is written almost entirely in Python and builds upon a Subaru-developed middleware based on the XML-RPC protocol. This framework offers the following benefits: - has very few dependences outside of standard Python - provides a nearly seamless remote proxy object-oriented interface - provides optional user/password authentication and/or SSL encryption - is extremely simple to use from client applications - is connectionless, and assists transparent failover of communications and services on a cluster of hosts - has reasonable performance for a wide range of needs - allows multiple language bindings - for dynamic languages, requires no interface stub files The "back end" (service side) of the OCS is nearing completion, and has already been used successfully during two separate OCS engineering runs. It is comprised of only a couple dozen processes, and provides automated failover capabilities on a rack of commodity x86 Linux servers. We provide an overview of the middleware design and its failover capabilities. Some data on the performance of communications using the middleware protocol is included.

  8. Subaru Telescope limits on cosmological variations in the fine-structure constant

    Science.gov (United States)

    Murphy, Michael T.; Cooksey, Kathy L.

    2017-11-01

    Previous, large samples of quasar absorption spectra have indicated some evidence for relative variations in the fine-structure constant (Δα/α) across the sky. However, they were likely affected by long-range distortions of the wavelength calibration, so it is important to establish a statistical sample of more reliable results from multiple telescopes. Here we triple the sample of Δα/α measurements from the Subaru Telescope which have been `supercalibrated' to correct for long-range distortions. A blinded analysis of the metallic ions in six intervening absorption systems in two Subaru quasar spectra provides no evidence for α variation, with a weighted mean of Δα/α = 3.0 ± 2.8stat ± 2.0sys parts per million (1σ statistical and systematic uncertainties). The main remaining systematic effects are uncertainties in the long-range distortion corrections, absorption profile models, and errors from redispersing multiple quasar exposures on to a common wavelength grid. The results also assume that terrestrial isotopic abundances prevail in the absorbers; assuming only the dominant terrestrial isotope is present significantly lowers Δα/α, though it is still consistent with zero. Given the location of the two quasars on the sky, our results do not support the evidence for spatial α variation, especially when combined with the 21 other recent measurements which were corrected for, or resistant to, long-range distortions. Our spectra and absorption profile fits are publicly available.

  9. Developing engineering model Cobra fiber positioners for the Subaru Telescope's prime focus spectrometer

    Science.gov (United States)

    Fisher, Charles; Morantz, Chaz; Braun, David; Seiffert, Michael; Aghazarian, Hrand; Partos, Eamon; King, Matthew; Hovland, Larry E.; Schwochert, Mark; Kaluzny, Joel; Capocasale, Christopher; Houck, Andrew; Gross, Johannes; Reiley, Daniel; Mao, Peter; Riddle, Reed; Bui, Khanh; Henderson, David; Haran, Todd; Culhane, Robert; Piazza, Daniele; Walkama, Eric

    2014-07-01

    The Cobra fiber positioner is being developed by the California Institute of Technology (CIT) and the Jet Propulsion Laboratory (JPL) for the Prime Focus Spectrograph (PFS) instrument that will be installed at the Subaru Telescope on Mauna Kea, Hawaii. PFS is a fiber fed multi-object spectrometer that uses an array of Cobra fiber positioners to rapidly reconfigure 2394 optical fibers at the prime focus of the Subaru Telescope that are capable of positioning a fiber to within 5μm of a specified target location. A single Cobra fiber positioner measures 7.7mm in diameter and is 115mm tall. The Cobra fiber positioner uses two piezo-electric rotary motors to move a fiber optic anywhere in a 9.5mm diameter patrol area. In preparation for full-scale production of 2550 Cobra positioners an Engineering Model (EM) version was developed, built and tested to validate the design, reduce manufacturing costs, and improve system reliability. The EM leveraged the previously developed prototype versions of the Cobra fiber positioner. The requirements, design, assembly techniques, development testing, design qualification and performance evaluation of EM Cobra fiber positioners are described here. Also discussed is the use of the EM build and test campaign to validate the plans for full-scale production of 2550 Cobra fiber positioners scheduled to begin in late-2014.

  10. SEEDS - Strategic explorations of exoplanets and disks with the Subaru Telescope.

    Science.gov (United States)

    Tamura, Motohide

    2016-01-01

    The first convincing detection of planets orbiting stars other than the Sun, or exoplanets, was made in 1995. In only 20 years, the number of the exoplanets including promising candidates has already accumulated to more than 5000. Most of the exoplanets discovered so far are detected by indirect methods because the direct imaging of exoplanets needs to overcome the extreme contrast between the bright central star and the faint planets. Using the large Subaru 8.2-m Telescope, a new high-contrast imager, HiCIAO, and second-generation adaptive optics (AO188), the most ambitious high-contrast direct imaging survey to date for giant planets and planet-forming disks has been conducted, the SEEDS project. In this review, we describe the aims and results of the SEEDS project for exoplanet/disk science. The completeness and uniformity of this systematic survey mean that the resulting data set will dominate this field of research for many years.

  11. Astronomical observation devices CIAO and COMICS for Telescope Subaru; Sugbaru boenkyo kansoku sochi CIAO/COMICS

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-04-20

    Described herein are astronomical observation devices, a coronagraph imaging device (CIAO) and intermediate-infrared imaging spectrometer (COMICS), delivered to National Astronomical Observatory in October 1999. These devices are for the focal section of Telescope Subaru, completed in Hawaii in 1999 (devices for the first stage project), to observe various celestial objects by imaging and spectroscopically processing the infrared ray data collected by the telescope. This company has developed these devices jointly with National Astronomical Observatory as the orderer. They have been in service since December 1999 when they were set in the telescope (the attached photograph shows COMICS). Its major specifications are dimensions: 2,000 mm long, 2,000 mm wide and 1900 mm high, weight: 1,300 kg (CIAO) and 1640 kg (COMICS), and detector temperature: 35K (-238 degrees C) for CIAO and 5K (-268 degrees C) for COMICS. They are featured by the infrared sensor and optical system cooled by a system which uses a refrigerator to prevent heat radiation (infrared ray) from the ambient; and the optical system being insulated and supported by a tension strap structure to keep its performance unaffected by cooling or slanting ({+-}70 degrees). (translated by NEDO)

  12. Prime Focus Spectrograph: A very wide-field, massively multiplexed, optical & near-infrared spectrograph for Subaru Telescope

    Science.gov (United States)

    Tamura, Naoyuki

    This short article is about Prime Focus Spectrograph (PFS), a very wide-field, massively-multiplexed, and optical & near-infrared (NIR) spectrograph as a next generation facility instrument on Subaru Telescope. More details and updates are available on the PFS official website (http://pfs.ipmu.jp), blog (http://pfs.ipmu.jp/blog/), and references therein. The project, instrument, & timeline PFS will position 2400 fibers to science targets or blank sky in the 1.3 degree field on the Subaru prime focus. These fibers will be quickly (~60sec) reconfigurable and feed the photons during exposures to the Spectrograph System (SpS). SpS consists of 4 modules each of which accommodate ~600 fibers and deliver spectral images ranging from 380nm to 1260nm simultaneously at one exposure via the 3 arms of blue, red, and NIR cameras. The instrument development has been undertaken by the international collaboration at the initiative of Kavli IPMU. The project is now going into the construction phase aiming at system integration and on-sky engineering observations in 2017-2018, and science operation in 2019. The survey design has also been under development envisioning a survey spanning ~300 nights over ~5 years in the framework of Subaru Strategic Program (SSP). The key science areas are: Cosmology, galaxy/AGN evolution, and Galactic Archaeology (GA) (Takada et al. 2014). The cosmology program will be to constrain the nature of dark energy via a survey of emission line galaxies over a comoving volume of 10 Gpc3 at z=0.8-2.4. In the galaxy/AGN program, the wide wavelength coverage of PFS as well as the large field of view will be exploited to characterize the galaxy populations and its clustering properties over a wide redshift range. A survey of color-selected galaxies/AGN at z = 1-2 will be conducted over 20 square degrees yielding a fair sample of galaxies with stellar masses down to ~1010 M ⊙. In the GA program, radial velocities and chemical abundances of stars in the Milky

  13. Spatially resolved medium resolution spectroscopy of an interacting E+A (post-starburst) system with the Subaru Telescope

    Science.gov (United States)

    Goto, Tomotsugu; Yagi, Masafumi; Yamauchi, Chisato

    2008-12-01

    We have performed spatially resolved medium resolution long-slit spectroscopy of a nearby E+A (post-starburst) galaxy system, SDSSJ161330.18+510335.5, with the FOCAS spectrograph mounted on the Subaru Telescope. This E+A galaxy has an obvious companion galaxy 14kpc in front with the velocity difference of 61.8kms-1. Both galaxies have obviously disturbed morphology. Thus, this E+A system provides us with a perfect opportunity to investigate the relation between the post-starburst phenomena and galaxy-galaxy interaction. We have found that the Hδ equivalent width (EW) of the E+A galaxy is greater than 7Å galaxy wide (8.5kpc) with no significant spatial variation. The E+A galaxy has a weak [OIII] emission (EW ~ 1Å) offset by ~2.6kpc from the peak of the Balmer absorption lines. We detected a rotational velocity in the companion galaxy of >175kms-1. The progenitor of the companion may have been a rotationally supported, but yet passive S0 galaxy. We did not detect significant rotation on the E+A galaxy. A metallicity estimate based on the r - H colour suggests Z = 0.008 and 0.02, for the E+A and the companion galaxies, respectively. Assuming these metallicity estimates, the age of the E+A galaxy after quenching the star formation is estimated to be 100-500Myr, with its centre having a slightly younger stellar population. The companion galaxy is estimated to have an older stellar population of >2Gyr of age with no significant spatial variation. These findings are inconsistent with a simple picture where the dynamical interaction creates infall of the gas reservoir that causes the central starburst/post-starburst. Instead, our results present an important example where the galaxy-galaxy interaction can trigger a galaxy-wide post-starburst phenomenon. Based on data collected at the Subaru Telescope, which is operated by the National Astronomical Observatory of Japan. E-mail: tomo@ifa.hawaii.edu ‡ Japan Society for the Promotion of Science (JSPS) SPD Fellow.

  14. SEEDS — Strategic explorations of exoplanets and disks with the Subaru Telescope

    Science.gov (United States)

    TAMURA, Motohide

    2016-01-01

    The first convincing detection of planets orbiting stars other than the Sun, or exoplanets, was made in 1995. In only 20 years, the number of the exoplanets including promising candidates has already accumulated to more than 5000. Most of the exoplanets discovered so far are detected by indirect methods because the direct imaging of exoplanets needs to overcome the extreme contrast between the bright central star and the faint planets. Using the large Subaru 8.2-m Telescope, a new high-contrast imager, HiCIAO, and second-generation adaptive optics (AO188), the most ambitious high-contrast direct imaging survey to date for giant planets and planet-forming disks has been conducted, the SEEDS project. In this review, we describe the aims and results of the SEEDS project for exoplanet/disk science. The completeness and uniformity of this systematic survey mean that the resulting data set will dominate this field of research for many years. PMID:26860453

  15. Magellan Telescopes operations 2008

    Science.gov (United States)

    Osip, David J.; Phillips, Mark M.; Palunas, Povilas; Perez, Frank; Leroy, M.

    2008-07-01

    The twin 6.5m Magellan Telescopes have been in routine operations at the Las Campanas Observatory in the Chilean Andes since 2001 and 2002 respectively. The telescopes are owned and operated by Carnegie for the benefit of the Magellan consortium members (Carnegie Institution of Washington, Harvard University, the University of Arizona, Massachusetts Institute of Technology, and the University of Michigan). This paper provides an up to date review of the scientific, technical, and administrative structure of the 'Magellan Model' for observatory operations. With a modest operations budget and a reasonably small staff, the observatory is operated in the "classical" mode, wherein the visiting observer is a key member of the operations team. Under this model, all instrumentation is supplied entirely by the consortium members and the various instrument teams continue to play a critical support role beyond initial deployment and commissioning activities. Here, we present a critical analysis of the Magellan operations model and suggest lessons learned and changes implemented as we continue to evolve an organizational structure that can efficiently deliver a high scientific return for the investment of the partners.

  16. ESO Successfully Tests Automation of Telescope Operations

    Science.gov (United States)

    1997-02-01

    referred to as the VLT Data Flow System , now being perfected by the ESO Data Management Division for use on ESO's Very Large Telescope project. First tests at the NTT On February 5, a team of software engineers and astronomers from ESO used a first version of the new VLT Data Flow System to perform observations on ESO's New Technology Telescope (NTT) at the La Silla Observatory in Chile. A computer file containing a complete description of an observation (for instance, object position in the sky, filtres and exposure time, and other relevant information) prepared in advance by an astronomer was transferred via the satellite link from the ESO Headquarters in Germany to the NTT computers at La Silla and executed on the control system of the telescope. The telescope then moved to the correct position in the sky, the camera was activated and a few minutes later, a processed image a distant galaxy appeared on the screen in front of the observers. The image was saved in an automatic archive system that writes the astronomical data on CD-ROM. The entire process took place automatically and demonstrated that this system is capable of taking high quality data from the sky at the best possible time and delivering the results to the astronomer, efficiently and in the most convenient form. Further developments This is the first time that a ground-based telescope has been operated under the new system. This successful initial test bodes well for the start-up of the VLT. During 1997, ESO will further develop the data flow system in preparation for the beginning of commissioning of the first VLT 8.2-metre unit, less then 12 months from now. How to obtain ESO Press Information ESO Press Information is made available on the World-Wide Web (URL: http://www.eso.org../). ESO Press Photos may be reproduced, if credit is given to the European Southern Observatory.

  17. Hα Intensity Map of the Repeating Fast Radio Burst FRB 121102 Host Galaxy from Subaru/Kyoto 3DII AO-assisted Optical Integral-field Spectroscopy

    Science.gov (United States)

    Kokubo, Mitsuru; Mitsuda, Kazuma; Sugai, Hajime; Ozaki, Shinobu; Minowa, Yosuke; Hattori, Takashi; Hayano, Yutaka; Matsubayashi, Kazuya; Shimono, Atsushi; Sako, Shigeyuki; Doi, Mamoru

    2017-08-01

    We present the Hα intensity map of the host galaxy of the repeating fast radio burst FRB 121102 at a redshift of z = 0.193 obtained with the AO-assisted Kyoto 3DII optical integral-field unit mounted on the 8.2 m Subaru Telescope. We detected a compact Hα-emitting (I.e., star-forming) region in the galaxy, which has a much smaller angular size (universe as {{{Ω }}}{IGM}> 0.012. Based on data collected at Subaru Telescope, which is operated by the National Astronomical Observatory of Japan.

  18. Automation of Hubble Space Telescope Mission Operations

    Science.gov (United States)

    Burley, Richard; Goulet, Gregory; Slater, Mark; Huey, William; Bassford, Lynn; Dunham, Larry

    2012-01-01

    On June 13, 2011, after more than 21 years, 115 thousand orbits, and nearly 1 million exposures taken, the operation of the Hubble Space Telescope successfully transitioned from 24x7x365 staffing to 815 staffing. This required the automation of routine mission operations including telemetry and forward link acquisition, data dumping and solid-state recorder management, stored command loading, and health and safety monitoring of both the observatory and the HST Ground System. These changes were driven by budget reductions, and required ground system and onboard spacecraft enhancements across the entire operations spectrum, from planning and scheduling systems to payload flight software. Changes in personnel and staffing were required in order to adapt to the new roles and responsibilities required in the new automated operations era. This paper will provide a high level overview of the obstacles to automating nominal HST mission operations, both technical and cultural, and how those obstacles were overcome.

  19. Subaru SEEDS Survey of Exoplanets and Disks

    Science.gov (United States)

    McElwain, Michael W.

    2012-01-01

    The Strategic Exploration of Exoplanets and Disks at Subaru (SEEDS) is the first strategic observing program (SSOPs) awarded by the National Astronomical Observatory of Japan (NAOJ). SEEDS targets a broad sample of stars that span a wide range of masses and ages to explore the formation and evolution of planetary systems. This survey has been awarded 120 nights over five years time to observe nearly 500 stars. Currently in the second year, SEEDS has already produced exciting new results for the protoplanetary disk AB Aur, transitional disk LkCa15, and nearby companion to GJ 758. We present the survey architecture, performance, recent results, and the projected sample. Finally, we will discuss planned upgrades to the high contrast instrumentation at the Subaru Telescope

  20. Implementation and Operation of a Robotic Telescope on Skynet

    Science.gov (United States)

    Smith, Adam B.; Caton, Daniel B.; Hawkins, R. Lee

    2016-05-01

    We describe the implementation of a remotely operated telescope on the Skynet Robotic Telescope Network, a system developed and run by the University of North Carolina-Chapel Hill. Our telescope, operated by Appalachian State University at its Dark Sky Observatory, runs robotically on this queue-scheduled system, automatically taking calibration images and acquiring program images, and responding to Internet commands to image the afterglow of accessible Gamma-Ray Burst events. We describe the process of implementing a Skynet-run telescope from our client-side view, and offer advice for others who might consider putting telescopes on Skynet. The implementation has proven very successful, obtaining over a hundred thousand images over the past six years, of various targets for research and educational purposes, and has responded to several GRB observation requests with several afterglow detections.

  1. How Long Can the Hubble Space Telescope Operate Reliably?

    Science.gov (United States)

    Xapsos, M. A.; Stauffer, C.; Jordan, T.; Poivey, C.; Lum, G.; Haskins, D. N.; Pergosky, A. M.; Smith, D. C.; LaBel, K. A.

    2014-01-01

    Total ionizing dose exposure of electronic parts in the Hubble Space Telescope is analyzed using 3-D ray trace and Monte Carlo simulations. Results are discussed along with other potential failure mechanisms for science operations.

  2. Timing characterization and analysis of the Linux-based, closed loop control computer for the Subaru Telescope laser guide star adaptive optics system

    Science.gov (United States)

    Dinkins, Matthew; Colley, Stephen

    2008-07-01

    Hardware and software specialized for real time control reduce the timing jitter of executables when compared to off-the-shelf hardware and software. However, these specialized environments are costly in both money and development time. While conventional systems have a cost advantage, the jitter in these systems is much larger and potentially problematic. This study analyzes the timing characterstics of a standard Dell server running a fully featured Linux operating system to determine if such a system would be capable of meeting the timing requirements for closed loop operations. Investigations are preformed on the effectiveness of tools designed to make off-the-shelf system performance closer to specialized real time systems. The Gnu Compiler Collection (gcc) is compared to the Intel C Compiler (icc), compiler optimizations are investigated, and real-time extensions to Linux are evaluated.

  3. SOFIA in operation: telescope performance during the early science flights

    Science.gov (United States)

    Kärcher, Hans J.; Wagner, Jörg; Krabbe, Alfred; Lampater, Ulrich; Keilig, Thomas; Wolf, Jürgen

    2012-09-01

    The Stratospheric Observatory for Infrared Astronomy SOFIA started in December 2010 with the first series of science flights, and has successfully completed about 38 science missions until fall 2011. The science instruments flown included HIPO, FORCAST, GREAT and FLITECAM. Beside their scientific results (see related papers in these proceedings) the flights delivered an extensive data base which is now used for the telescope performance characterization and the operational optimization of the telescope in its unique environment. In this progress report we summarize recent achievements of the observatory as well as the status of the telescope and give an update of the SOFIA pointing system completed by intended future pointing optimization activities.

  4. First On-Site Data Analysis System for Subaru/Suprime-Cam

    Science.gov (United States)

    Furusawa, Hisanori; Okura, Yuki; Mineo, Sogo; Takata, Tadafumi; Nakata, Fumiaki; Tanaka, Manobu; Katayama, Nobuhiko; Itoh, Ryosuke; Yasuda, Naoki; Miyazaki, Satoshi; Komiyama, Yutaka; Utsumi, Yousuke; Uchida, Tomohisa; Aihara, Hiroaki

    2011-03-01

    We developed an automated on-site quick analysis system for mosaic CCD data of Suprime-Cam, which is a wide-field camera mounted at the prime focus of the Subaru Telescope, Mauna Kea, Hawaii. The first version of the data-analysis system was constructed, and started to operate in general observations. This system is a new function of observing support at the Subaru Telescope to provide the Subaru user community with an automated on-site data evaluation, aiming at improvements of observers' productivity, especially in large imaging surveys. The new system assists the data evaluation tasks in observations by the continuous monitoring of the characteristics of every data frame during observations. The evaluation results and data frames processed by this system are also useful for reducing the data-processing time in a full analysis after an observation. The primary analysis functions implemented in the data-analysis system are composed of automated realtime analysis for data evaluation and on-demand analysis, which is executed upon request, including mosaicing analysis and flat making analysis. In data evaluation, which is controlled by the organizing software, the database keeps track of the analysis histories, as well as the evaluated values of data frames, including seeing and sky background levels; it also helps in the selection of frames for mosaicing and flat making analysis. We examined the system performance and confirmed an improvement in the data-processing time by a factor of 9 with the aid of distributed parallel data processing and on-memory data processing, which makes the automated data evaluation effective.

  5. An H-band Vector Vortex Coronagraph for the Subaru Coronagraphic Extreme-adaptive Optics System

    Science.gov (United States)

    Kühn, J.; Serabyn, E.; Lozi, J.; Jovanovic, N.; Currie, T.; Guyon, O.; Kudo, T.; Martinache, F.; Liewer, K.; Singh, G.; Tamura, M.; Mawet, D.; Hagelberg, J.; Defrere, D.

    2018-03-01

    The vector vortex is a coronagraphic imaging mode of the recently commissioned Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) platform on the 8 m Subaru Telescope. This multi-purpose high-contrast visible and near-infrared (R- to K-band) instrument is not only intended to serve as a VLT-class “planet-imager” instrument in the northern hemisphere, but also to operate as a technology demonstration testbed ahead of the ELTs-era, with a particular emphasis on small inner-working angle (IWA) coronagraphic capabilities. The given priority to small-IWA imaging led to the early design choice to incorporate focal-plane phase-mask coronagraphs. In this context, a test H-band vector vortex liquid crystal polymer waveplate was provided to SCExAO, to allow a one-to-one comparison of different small-IWA techniques on the same telescope instrument, before considering further steps. Here we present a detailed overview of the vector vortex coronagraph, from its installation and performances on the SCExAO optical bench, to the on-sky results in the extreme AO regime, as of late 2016/early 2017. To this purpose, we also provide a few recent on-sky imaging examples, notably high-contrast ADI detection of the planetary-mass companion κ Andromedae b, with a signal-to-noise ratio above 100 reached in less than 10 mn exposure time.

  6. Observation of Coherent Synchrotron Radiation at NewSUBARU

    CERN Document Server

    Hashimoto, Satoshi; Shoji, Yoshihiko; Takahashi, Toshiharu

    2005-01-01

    Coherent Synchrotron Radiation from a short electron bunch in a storage ring was observed at NewSUBARU. The energy of electron was 1GeV. The ring was operated with quasi-isochronous mode. The linear momentum compaction factor was smaller than 2 X 10

  7. PIRATE: A Remotely Operable Telescope Facility for Research and Education

    Science.gov (United States)

    Holmes, S.; Kolb, U.; Haswell, C. A.; Burwitz, V.; Lucas, R. J.; Rodriguez, J.; Rolfe, S. M.; Rostron, J.; Barker, J.

    2011-10-01

    We introduce PIRATE, a new remotely operable telescope facility for use in research and education, constructed from off-the-shelf hardware, operated by The Open University. We focus on the PIRATE Mark 1 operational phase, in which PIRATE was equipped with a widely used 0.35 m Schmidt-Cassegrain system (now replaced with a 0.425 m corrected Dall-Kirkham astrograph). Situated at the Observatori Astronòmic de Mallorca, PIRATE is currently used to follow up potential transiting extrasolar planet candidates produced by the SuperWASP North experiment, as well as to hunt for novae in M31 and other nearby galaxies. It is operated by a mixture of commercially available software and proprietary software developed at the Open University. We discuss problems associated with performing precision time-series photometry when using a German Equatorial Mount, investigating the overall performance of such off-the-shelf solutions in both research and teaching applications. We conclude that PIRATE is a cost-effective research facility, and it also provides exciting prospects for undergraduate astronomy. PIRATE has broken new ground in offering practical astronomy education to distance-learning students in their own homes.

  8. Venus cloud top structure seen by the coordinated Subaru and Akatsuki observations

    Science.gov (United States)

    Sato, T. M.; Sagawa, H.; Kouyama, T.; Taguchi, M.; Lee, Y. J.; Peralta, J.; Takagi, M.; Hashimoto, G. L.; Satoh, T.; Kasaba, Y.; Aoki, S.; Fukuhara, T.; Yamazaki, A.; Imamura, T.; Nakamura, M.

    2017-09-01

    The coordinated Subaru and Akatsuki observations of Venus cloud top were conducted during the period of January 11-14, 2017. By using a large-aperture ground-based telescope, we could confirm that a stationary bow-shaped structure as seen in Akatsuki/LIR images has been fixed in a position above the highland (Maat Mons).

  9. Small Jupiter Trojans Survey with the Subaru/Hyper Suprime-Cam

    Science.gov (United States)

    Yoshida, Fumi; Terai, Tsuyoshi

    2017-08-01

    We observed the L4 Jupiter Trojans (JTs) swarm using the Hyper Suprime-Cam attached to the 8.2 m Subaru Telescope on 2015 March 30 (UT). The survey covered ˜26 deg2 of sky area near the opposition and around the ecliptic plane with a 240 s exposure time in the r-band filter through the entire survey. We detected 631 L4 JTs in the survey field with a detection limit of m r = 24.4 mag. We selected 481 objects with absolute magnitude H r D) \\propto {D}-b. The slope value (α) of the corresponding absolute magnitude distribution (N(H) \\propto {10}α H) is 0.37 ± 0.01. This α is consistent with that of the faint-end slope presented by Wong & Brown. The size distribution obtained from this survey is slightly different from the results of previous surveys with a similar size range, which reported broken power-law or double power-law slopes in their cumulative size distribution. Our results insist that the slope of b = 1.84 continues from H = 14.0 to at least H = 17.4. Since this work contains the largest L4 JT samples and is 1 mag deeper than the study by Wong & Brown, we believe that our study has obtained the most robust size distribution of small JTs so far. Combining the cataloged L4 JTs and our survey, we show the entire size distribution of L4 JTs up to H r = 17.4 mag. Based on data collected at the Subaru Telescope, which is operated by the National Astronomical Observatory of Japan.

  10. Hubble Space Telescope Servicing Mission 3A Rendezvous Operations

    Science.gov (United States)

    Lee, S.; Anandakrishnan, S.; Connor, C.; Moy, E.; Smith, D.; Myslinski, M.; Markley, L.; Vernacchio, A.

    2001-01-01

    The Hubble Space Telescope (HST) hardware complement includes six gas bearing, pulse rebalanced rate integrating gyros, any three of which are sufficient to conduct the science mission. After the loss of three gyros between April 1997 and April 1999 due to a known corrosion mechanism, NASA decided to split the third HST servicing mission into SM3A, accelerated to October 1999, and SM3B, scheduled for November 2001. SM3A was developed as a quick turnaround 'Launch on Need' mission to replace all six gyros. Loss of a fourth gyro in November 1999 caused HST to enter Zero Gyro Sunpoint (ZGSP) safemode, which uses sun sensors and magnetometers for attitude determination and momentum bias to maintain attitude stability during orbit night. Several instances of large attitude excursions during orbit night were observed, but ZGSP performance was adequate to provide power-positive sun pointing and to support low gain antenna communications. Body rates in ZGSP were estimated to exceed the nominal 0.1 deg/sec rendezvous limit, so rendezvous operations were restructured to utilize coarse, limited life, Retrieval Mode Gyros (RMGs) under Hardware Sunpoint (HWSP) safemode. Contingency procedures were developed to conduct the rendezvous in ZGSP in the event of RMGA or HWSP computer failure. Space Shuttle Mission STS-103 launched on December 19, 1999 after a series of weather and Shuttle-related delays. After successful rendezvous and grapple under HWSP/RMGA, the crew changed out all six gyros. Following deploy and systems checkout, HST returned to full science operations.

  11. Goldstone-Apple Valley Radio Telescope System Theory of Operation

    Science.gov (United States)

    Stephan, George R.

    1997-01-01

    The purpose of this learning module is to enable learners to describe how the Goldstone-Apple Valley Radio Telescope (GAVRT) system functions in support of Apple Valley Science and Technology Center's (AVSTC) client schools' radio astronomy activities.

  12. Learning neuroendoscopy with an exoscope system (video telescopic operating monitor): Early clinical results.

    Science.gov (United States)

    Parihar, Vijay; Yadav, Y R; Kher, Yatin; Ratre, Shailendra; Sethi, Ashish; Sharma, Dhananjaya

    2016-01-01

    Steep learning curve is found initially in pure endoscopic procedures. Video telescopic operating monitor (VITOM) is an advance in rigid-lens telescope systems provides an alternative method for learning basics of neuroendoscopy with the help of the familiar principle of microneurosurgery. The aim was to evaluate the clinical utility of VITOM as a learning tool for neuroendoscopy. Video telescopic operating monitor was used 39 cranial and spinal procedures and its utility as a tool for minimally invasive neurosurgery and neuroendoscopy for initial learning curve was studied. Video telescopic operating monitor was used in 25 cranial and 14 spinal procedures. Image quality is comparable to endoscope and microscope. Surgeons comfort improved with VITOM. Frequent repositioning of scope holder and lack of stereopsis is initial limiting factor was compensated for with repeated procedures. Video telescopic operating monitor is found useful to reduce initial learning curve of neuroendoscopy.

  13. Great Escape for neglected Subaru

    CERN Multimedia

    2008-01-01

    A CERN engineer has just come back from a challenge of a lifetime. Together with two friends he drove 4000 miles in a car they found abandoned in a car park at CERN. The Up N Atom rally team began their adventure outside the Globe in January.If you’ve ever wondered what happens to the abandoned cars that litter the car parks of CERN the answer, for one at least, could be stranger than you think. This January, an old red Subaru that had been sitting in a car park for two years made it all the way to the Gambia – with a little help from a CERN engineer! David Mcfarlane, who works in TS-LEA, and two friends from the UK have just returned from the Banjul Rally, a 4,000 mile race through Europe and North Africa. The team, appropriately named the "Up N Atoms", set off from outside the Globe on 4 January and crossed France, Spain, Morocco, the Western Sahara, Mauritania and Senegal before finally ending up in Banjul, the Gambia. A...

  14. Design and operation of FACT - the first G-APD Cherenkov telescope

    Science.gov (United States)

    Anderhub, H.; Backes, M.; Biland, A.; Boccone, V.; Braun, I.; Bretz, T.; Buß, J.; Cadoux, F.; Commichau, V.; Djambazov, L.; Dorner, D.; Einecke, S.; Eisenacher, D.; Gendotti, A.; Grimm, O.; von Gunten, H.; Haller, C.; Hildebrand, D.; Horisberger, U.; Huber, B.; Kim, K.-S.; Knoetig, M. L.; Köhne, J.-H.; Krähenbühl, T.; Krumm, B.; Lee, M.; Lorenz, E.; Lustermann, W.; Lyard, E.; Mannheim, K.; Meharga, M.; Meier, K.; Montaruli, T.; Neise, D.; Nessi-Tedaldi, F.; Overkemping, A.-K.; Paravac, A.; Pauss, F.; Renker, D.; Rhode, W.; Ribordy, M.; Röser, U.; Stucki, J.-P.; Schneider, J.; Steinbring, T.; Temme, F.; Thaele, J.; Tobler, S.; Viertel, G.; Vogler, P.; Walter, R.; Warda, K.; Weitzel, Q.; Zänglein, M.

    2013-06-01

    The First G-APD Cherenkov Telescope (FACT) is designed to detect cosmic gamma-rays with energies from several hundred GeV up to about 10 TeV using the Imaging Atmospheric Cherenkov Technique. In contrast to former or existing telescopes, the camera of the FACT telescope is comprised of solid-state Geiger-mode Avalanche Photodiodes (G-APD) instead of photomultiplier tubes for photo detection. It is the first full-scale device of its kind employing this new technology. The telescope is operated at the Observatorio del Roque de los Muchachos (La Palma, Canary Islands, Spain) since fall 2011. This paper describes in detail the design, construction and operation of the system, including hardware and software aspects. Technical experiences gained after one year of operation are discussed and conclusions with regard to future projects are drawn.

  15. Subaru/FOCAS Optical Spectroscopy for a possible IceCube-170922A counterpart TXS 0506+056

    Science.gov (United States)

    Morokuma, Tomoki; Tanaka, Yasuyuki T.; Ohta, Kouji; Matsuoka, Yoshiki; Yamashita, Takuji; Kato, Nanako

    2017-10-01

    We performed optical spectroscopic observations on September 30 and October 1, 2017 (UT) with the 8.2-m Subaru telescope and Faint Object Camera and Spectrograph (FOCAS) for TXS 0506+056 which is a possible counterpart to the IceCube-170922A high-energy neutrino event (Tanaka et al. 2017, ATel #10791).

  16. Stellar Stream and Halo Structure in the Andromeda Galaxy from a Subaru/Hyper Suprime-Cam Survey

    Science.gov (United States)

    Komiyama, Yutaka; Chiba, Masashi; Tanaka, Mikito; Tanaka, Masayuki; Kirihara, Takanobu; Miki, Yohei; Mori, Masao; Lupton, Robert H.; Guhathakurta, Puragra; Kalirai, Jason S.; Gilbert, Karoline; Kirby, Evan; Lee, Myun Gyoon; Jang, In Sung; Sharma, Sanjib; Hayashi, Kohei

    2018-01-01

    We present wide and deep photometry of the northwestern part of the halo of the Andromeda galaxy (M31) using Hyper Suprime-Cam on the Subaru Telescope. The survey covers a 9.2 deg2 field in the g, i, and NB515 bands and shows a clear red giant branch (RGB) of M31's halo stars and a pronounced red clump (RC) feature. The spatial distribution of RC stars shows a prominent stream feature, the Northwestern (NW) Stream, and a diffuse substructure in the southern part of our survey field. We estimate the distances based on the RC method and obtain (m{--}M) = 24.63 ± 0.191 (random) ± 0.057 (systematic) and 24.29 ± 0.211 (random) ± 0.057 (systematic) mag for the NW Stream and diffuse substructure, respectively, implying that the NW Stream is located behind M31, whereas the diffuse substructure is located in front of it. We also estimate line-of-sight distances along the NW Stream and find that the southern part of the stream is ∼20 kpc closer to us relative to the northern part. The distance to the NW Stream inferred from the isochrone fitting to the color–magnitude diagram favors the RC-based distance, but the tip of the RGB (TRGB)-based distance estimated for NB515-selected RGB stars does not agree with it. The surface number density distribution of RC stars across the NW Stream is found to be approximately Gaussian with an FWHM of ∼25 arcmin (5.7 kpc), with a slight skew to the southwest side. That along the NW Stream shows a complicated structure, including variations in number density and a significant gap in the stream. Based on data collected at the Subaru Telescope, which is operated by the National Astronomical Observatory of Japan.

  17. Subaru spectroscopy and spectral modeling of Cygnus A

    Energy Technology Data Exchange (ETDEWEB)

    Merlo, Matthew J.; Perlman, Eric S. [Department of Physics and Space Sciences, Florida Institute of Technology, Melbourne, FL 32901 (United States); Nikutta, Robert [Department of Physics and Astronomy, University of Kentucky, Lexington, KY 40506-0055 (United States); Packham, Christopher [Department of Physics and Astronomy, University of Texas at San Antonio, 1 UTSA Circle, San Antonio, TX 78249 (United States); Elitzur, Moshe [Departamento de Ciencias Físicas, Universidad Andrés Bello, Av. República 252, Santiago (Chile); Imanishi, Masatoshi [Subaru Telescope, 650 N. A' ohoku Place, Hilo, HI 96720 (United States); Levenson, N. A. [Gemini Observatory, Casilla 603, La Serena (Chile); Radomski, James T. [SOFIA/USRA, NASA Ames Research Center, Moffett Field, CA 94035 (United States); Aretxaga, Itziar [Instituto Nacional de Astrofísica, Óptica y Electrónica, Calle Luis Erro 1, Sta. Ma. Tonantzintla, Puebla (Mexico)

    2014-06-10

    We present high angular resolution (∼0.''5) MIR spectra of the powerful radio galaxy, Cygnus A (Cyg A), obtained with the Subaru telescope. The overall shape of the spectra agree with previous high angular resolution MIR observations, as well as previous Spitzer spectra. Our spectra, both on and off nucleus, show a deep silicate absorption feature. The absorption feature can be modeled with a blackbody obscured by cold dust or a clumpy torus. The deep silicate feature is best fit by a simple model of a screened blackbody, suggesting that foreground absorption plays a significant, if not dominant, role in shaping the spectrum of Cyg A. This foreground absorption prevents a clear view of the central engine and surrounding torus, making it difficult to quantify the extent the torus attributes to the obscuration of the central engine, but does not eliminate the need for a torus in Cyg A.

  18. Prototyping the graphical user interface for the operator of the Cherenkov Telescope Array

    Science.gov (United States)

    Sadeh, I.; Oya, I.; Schwarz, J.; Pietriga, E.

    2016-07-01

    The Cherenkov Telescope Array (CTA) is a planned gamma-ray observatory. CTA will incorporate about 100 imaging atmospheric Cherenkov telescopes (IACTs) at a Southern site, and about 20 in the North. Previous IACT experiments have used up to five telescopes. Subsequently, the design of a graphical user interface (GUI) for the operator of CTA involves new challenges. We present a GUI prototype, the concept for which is being developed in collaboration with experts from the field of Human-Computer Interaction (HCI). The prototype is based on Web technology; it incorporates a Python web server, Web Sockets and graphics generated with the d3.js Javascript library.

  19. Space Telescope.

    Science.gov (United States)

    National Aeronautics and Space Administration, Huntsville, AL. George C. Marshall Space Flight Center.

    This pamphlet describes the Space Telescope, an unmanned multi-purpose telescope observatory planned for launch into orbit by the Space Shuttle in the 1980s. The unique capabilities of this telescope are detailed, the major elements of the telescope are described, and its proposed mission operations are outlined. (CS)

  20. Moving into the Light: The AEOS Telescope in the Daytime Operating Environment

    Science.gov (United States)

    Mayo, J.

    Abstract for Coming into the Light: The AEOS Telescope in the Daytime Operating Environment” Interest in daylight operation for the AEOS 3.67-m Telescope first surfaced during the preparation of the AEOS specification documentation in 1991. The author and Lt Rich Elder prepared, edited and combined requirements inputs from AFRL technical staff to create the final RFP document. In this released specification, AEOS daylight performance was limited to best effort, although provisions for adding secondary mirror sky light baffling were to be provided. In 1993, during the AEOS construction phase, AFRL requested that the author prepare a report on special considerations for operating AEOS in the solar illuminated daytime environment. This report was published and briefed to AFRL and Space Command at that time. Interest in this topic at AMOS was rekindled in 2007 by Dr Joe Janni and Lt Col Scott Hunt. The author updated his 1993 report and in June 2007 presented AEOS 1993 Daylight Operation Study Revisited” at AMOS. Subsequently, Dr Stacie Williams spearheaded additional work in this critical technical area. Recent efforts at Tau Technologies LLC have focused on external AEOS telescope baffling and shielding options assessment, solar irradiation effects on optical components, especially the primary mirror, and on modeling the solar illumination on the entire telescope during daylight operation. Solid Works and Illustrator simulation models have been developed and exercised.

  1. The stellar initial mass function in red-sequence galaxies: 1-μm spectroscopy of Coma cluster galaxies with Subaru/FMOS

    Science.gov (United States)

    Smith, Russell J.; Lucey, John R.; Carter, David

    2012-11-01

    To investigate possible variations in the stellar initial mass function (IMF) in red-sequence galaxies, we have obtained infrared spectroscopy with Subaru/Fibre Multi-Object Spectrograph (FMOS) for a sample of 92 red-sequence galaxies in the Coma cluster. Velocity dispersions, ages and element abundances for these galaxies have been previously determined from optical data. The full range of velocity dispersions covered by the sample is σ = 50-300 km s-1. By stacking the FMOS spectra in the rest frame and removing sky-subtraction residuals and other artefacts fixed in the observed frame, we derive composite spectra in the 9600-10500 Å range for galaxies grouped according to their velocity dispersion or Mg/Fe ratio. We measure the Wing-Ford band of FeH and a new index centred on a Ca I line at 10345 Å; these features are strong in cool dwarf stars, and hence reflect the form of the IMF at low mass ( 250 km s-1). Binning the observed galaxies instead by Mg/Fe ratio, the behaviour of both indices implies a trend of IMF from Chabrier-like, at abundance ratios close to solar, to Salpeter or heavier for highly α-enhanced populations. At face value, this suggests that the IMF depends on the mode of star formation, with intense rapid starbursts generating a larger population of low-mass stars. Based on data collected at Subaru Telescope, which is operated by the National Observatory of Japan.

  2. HARP : A submillimetre heterodyne array receiver operating on the James Clerk Maxwell Telescope

    NARCIS (Netherlands)

    Smith, H.; Buckle, J.; Hills, R.; Bell, G.; Richer, J.; Curtis, E.; Withington, S.; Leech, J.; Williamson, R.; Klapwijk, T.M.

    2008-01-01

    This paper describes the key design features and performance of HARP, an innovative heterodyne focal-plane array receiver designed and built to operate in the submillimetre on the James Clerk Maxwell Telescope (JCMT) in Hawaii. The 4x4 element array uses SIS detectors, and is the first

  3. Operating performance of the gamma-ray Cherenkov telescope: An end-to-end Schwarzschild–Couder telescope prototype for the Cherenkov Telescope Array

    Energy Technology Data Exchange (ETDEWEB)

    Dournaux, J.L., E-mail: jean-laurent.dournaux@obspm.fr [GEPI, Observatoire de Paris, PSL Research University, CNRS, Sorbonne Paris Cité, Université Paris Diderot, Place J. Janssen, 92190 Meudon (France); De Franco, A. [Department of Physics, University of Oxford, Keble Road, Oxford OX1 3RH (United Kingdom); Laporte, P. [GEPI, Observatoire de Paris, PSL Research University, CNRS, Sorbonne Paris Cité, Université Paris Diderot, Place J. Janssen, 92190 Meudon (France); White, R. [Max-Planck-Institut für Kernphysik, Saupfercheckweg 1, 69117 Heidelberg (Germany); Greenshaw, T. [University of Liverpool, Oliver Lodge Laboratory, P.O. Box 147, Oxford Street, Liverpool L69 3BX (United Kingdom); Sol, H. [LUTH, Observatoire de Paris, PSL Research University, CNRS, Université Paris Diderot, Place J. Janssen, 92190 Meudon (France); Abchiche, A. [CNRS, Division technique DT-INSU, 1 Place Aristide Briand, 92190 Meudon (France); Allan, D. [Department of Physics and Centre for Advanced Instrumentation, Durham University, South Road, Durham DH1 3LE (United Kingdom); Amans, J.P. [GEPI, Observatoire de Paris, PSL Research University, CNRS, Sorbonne Paris Cité, Université Paris Diderot, Place J. Janssen, 92190 Meudon (France); Armstrong, T.P. [Department of Physics and Centre for Advanced Instrumentation, Durham University, South Road, Durham DH1 3LE (United Kingdom); Balzer, A.; Berge, D. [GRAPPA, University of Amsterdam, Science Park 904, 1098 XH Amsterdam (Netherlands); Boisson, C. [LUTH, Observatoire de Paris, PSL Research University, CNRS, Université Paris Diderot, Place J. Janssen, 92190 Meudon (France); and others

    2017-02-11

    The Cherenkov Telescope Array (CTA) consortium aims to build the next-generation ground-based very-high-energy gamma-ray observatory. The array will feature different sizes of telescopes allowing it to cover a wide gamma-ray energy band from about 20 GeV to above 100 TeV. The highest energies, above 5 TeV, will be covered by a large number of Small-Sized Telescopes (SSTs) with a field-of-view of around 9°. The Gamma-ray Cherenkov Telescope (GCT), based on Schwarzschild–Couder dual-mirror optics, is one of the three proposed SST designs. The GCT is described in this contribution and the first images of Cherenkov showers obtained using the telescope and its camera are presented. These were obtained in November 2015 in Meudon, France.

  4. Highly automated on-orbit operations of the NuSTAR telescope

    Science.gov (United States)

    Roberts, Bryce; Bester, Manfred; Dumlao, Renee; Eckert, Marty; Johnson, Sam; Lewis, Mark; McDonald, John; Pease, Deron; Picard, Greg; Thorsness, Jeremy

    2014-08-01

    UC Berkeley's Space Sciences Laboratory (SSL) currently operates a fleet of seven NASA satellites, which conduct research in the fields of space physics and astronomy. The newest addition to this fleet is a high-energy X-ray telescope called the Nuclear Spectroscopic Telescope Array (NuSTAR). Since 2012, SSL has conducted on-orbit operations for NuSTAR on behalf of the lead institution, principle investigator, and Science Operations Center at the California Institute of Technology. NuSTAR operations benefit from a truly multi-mission ground system architecture design focused on automation and autonomy that has been honed by over a decade of continual improvement and ground network expansion. This architecture has made flight operations possible with nominal 40 hours per week staffing, while not compromising mission safety. The remote NuSTAR Science Operation Center (SOC) and Mission Operations Center (MOC) are joined by a two-way electronic interface that allows the SOC to submit automatically validated telescope pointing requests, and also to receive raw data products that are automatically produced after downlink. Command loads are built and uploaded weekly, and a web-based timeline allows both the SOC and MOC to monitor the state of currently scheduled spacecraft activities. Network routing and the command and control system are fully automated by MOC's central scheduling system. A closed-loop data accounting system automatically detects and retransmits data gaps. All passes are monitored by two independent paging systems, which alert staff of pass support problems or anomalous telemetry. NuSTAR mission operations now require less than one attended pass support per workday.

  5. A Case Study of Human-in-the-loop for Telescope Operation

    Science.gov (United States)

    2014-08-22

    AFRL-RH-WP-TR-2014-0112 A Case Study of Human-in-the-loop for Telescope Operation Vincent A. Schmidt, PhD John D. Ianni ... IANNI JEFFREY L. CRAIG Program Manager Chief, Battlespace Visualization Branch Battlespace Visualization Branch Warfighter Interface...PhD John D. Ianni Judson S. Shattuck Jacob A. Kern 5d. PROJECT NUMBER 5329 5e. TASK NUMBER 11 5f. WORK UNIT NUMBER 53291103 7. PERFORMING

  6. Spatiotemporal variations of Venus middle atmosphere revealed by Subaru/COMICS

    Science.gov (United States)

    Sato, T. M.; Sagawa, H.; Kouyama, T.; Imamura, T.; Satoh, T.

    2013-09-01

    We report the spatiotemporal variations of brightness temperatures of Venus at cloud top altitudes (~70 km) obtained by the Cooled Mid-Infrared Camera and Spectrometer (COMICS), mounted on the 8.2-m Subaru Telescope. The two important findings are (1) the brightness temperatures at north polar regions were synchronized with those at south polar regions at least in the three observation nights and (2) there were some streaky patterns as were seen in UV and these patterns varied from day to day.

  7. Minimoon Survey with Subaru Hyper Suprime-Cam

    Science.gov (United States)

    Jedicke, Robert; Boe, Ben; Bolin, Bryce T.; Bottke, William; Chyba, Monique; Denneau, Larry; Dodds, Curt; Granvik, Mikael; Kleyna, Jan; Weryk, Robert J.

    2017-10-01

    We will present the status of our search for minimoons using Hyper Suprime-Cam on the Subaru telescope on Maunkea, Hawaii. We use the term 'minimoon' to refer to objects that are gravitationally bound to the Earth-Moon system, make at least one revolution around the barycenter in a co-rotating frame relative to the Earth-Sun axis, and are within 3 Earth Hill-sphere radii (˜12 LD). There are one or two 1 to 2 meter diameter minimoons in the steady state population at any time, and about a dozen larger than 50 cm diameter. `Drifters' are also bound to the Earth-Moon system but make less than one revolution about the barycenter. The combined population of minimoons and drifters provide a new opportunity for scientific exploration of small asteroids and testing concepts for in-situ resource utilization. These objects provide interesting challenges for rendezvous missions because of their limited lifetime and complicated trajectories. Furthermore, they are difficult to detect because they are small, available for a limited time period, and move quickly across the sky.

  8. Study of application of space telescope science operations software for SIRTF use

    Science.gov (United States)

    Dignam, F.; Stetson, E.; Allendoerfer, W.

    1985-01-01

    The design and development of the Space Telescope Science Operations Ground System (ST SOGS) was evaluated to compile a history of lessons learned that would benefit NASA's Space Infrared Telescope Facility (SIRTF). Forty-nine specific recommendations resulted and were categorized as follows: (1) requirements: a discussion of the content, timeliness and proper allocation of the system and segment requirements and the resulting impact on SOGS development; (2) science instruments: a consideration of the impact of the Science Instrument design and data streams on SOGS software; and (3) contract phasing: an analysis of the impact of beginning the various ST program segments at different times. Approximately half of the software design and source code might be useable for SIRTF. Transportability of this software requires, at minimum, a compatible DEC VAX-based architecture and VMS operating system, system support software similar to that developed for SOGS, and continued evolution of the SIRTF operations concept and requirements such that they remain compatible with ST SOGS operation.

  9. Structure and Population of the Andromeda Stellar Halo from a Subaru/Suprime-Cam Survey

    Science.gov (United States)

    Tanaka, Mikito; Chiba, Masashi; Komiyama, Yutaka; Guhathakurta, Puragra; Kalirai, Jason S.; Iye, Masanori

    2010-01-01

    properties of an underlying, smooth, and extended halo component out to R>100 kpc. We find that the surface density of this smooth halo can be fitted to a Hernquist model of scale radius ~17 kpc or a power-law profile with Σ(R) vprop R -2.17±0.15. In contrast to the relative smoothness of the halo density profile, its metallicity distribution appears to be spatially non-uniform with non-monotonic variations with radius, suggesting that the halo population has not had sufficient time to dynamically homogenize the accreted populations. Further implications for the formation of the M31 halo are discussed. Based on data collected at the Subaru Telescope, which is operated by the National Astronomical Observatory of Japan.

  10. Computer-aided star pattern recognition with astrometry.net: in-flight support of telescope operations on SOFIA

    Science.gov (United States)

    Schindler, Karsten; Lang, Dustin; Moore, Liz; Hümmer, Martin; Wolf, Jürgen; Krabbe, Alfred

    2016-08-01

    SOFIA is an airborne observatory, operating a gyroscopically stabilized telescope with an effective aperture of 2.5 m on-board a modified Boeing 747SP. Its primary objective is to conduct observations at mid- to far-infrared wavelengths. When SOFIA opens its door to the night sky, the initial telescope pointing is estimated from the aircraft's position and heading as well as the telescope's attitude relative to the aircraft. This initial pointing estimate needs to be corrected using stars that are manually identified in tracking camera images; telescope pointing also needs to be verified and refined at the beginning of each flight leg. We report about the implementation of the astrometry.net package on the telescope operator workstations on-board SOFIA. This package provides a very robust, reliable and fast algorithm for blind astrometric image calibration. Using images from SOFIA's Wide Field Imager, we are able to display an almost instant, continuous feedback of calculated right ascension, declination and field rotation in the GUI for the telescope operator. The computer-aided recognition of star patterns will support telescope pointing calibrations in the future, further increasing the efficiency of the observatory. We also discuss other current and future use cases of the astrometry.net package in the SOFIA project and at the German SOFIA Institute (DSI).

  11. New infrared telescopic observation of Vesta

    Science.gov (United States)

    Palomba, E.; D'Aversa, E.; Sato, T.; Longobardo, A.; Aoki, S.; Sindoni, G.; Oliva, F.

    2017-09-01

    In this work we present new telescopic observations of the Vesta asteroid made at the Subaru Telescope by using the COMICS IR spectrometer. We were able to obtain 5 different observations in 5 day, at two different epochs. The obtained spectra do not exhibit Reststrahlen bands and show only weak features attributable to the Christiansen peak and to the transparency feature compatible with a fine grain size regolith.

  12. One-Meter Telescope in Kolonica Saddle - 4 Years of Operation

    Science.gov (United States)

    Kudzej, I.; Dubovsky, P. A.

    2010-12-01

    The actual technical status of 1 meter Vihorlat National Telescope (VNT) at Astronomical Observatory at Kolonica Saddle is presented. Cassegrain and Nasmyth focus, autoguiding system, computer controlled focusing and fine movements and other improvements achieved recently. For two channel photoelectric photometer the system of channels calibration based on artificial light source is described. For CCD camera FLI PL1001E actually installed in Cassegrain focus we presents transformation coefficients from our instrumental to international photometric BVRI system. The measurements were done during regular observations when good photometry of the constant field stars was available. Before FLI camera acquisition we used SBIG ST9 camera. Transformation coefficients for this instrument are presented as well. In the second part of the paper we presents results of variable stars observations with 1 meter telescope in recent four years. The first experimental electronic measurements were done in 2006. Both with CCD cameras and with two channel photoelectric photometer. Starting in 2007 the regular observing program is in operation. There are only few stars suitable for two channel photoelectric photometer observation. Generally the photometer is better when fast brightness changes (time scale of seconds) must be recorded. Thus the majority of observations is done with CCD detectors. We presents an brief overview of most important observing programs: long term monitoring of selected intermediate polars, eclipse observations of SW Sex stars. Occasional observing campaigns were performed on several interesting objects: OT J071126.0+440405, V603 Aql, V471 Tau eclipse timings, Z And in outburst.

  13. New Software for Ensemble Creation in the Spitzer-Space-Telescope Operations Database

    Science.gov (United States)

    Laher, Russ; Rector, John

    2004-01-01

    Some of the computer pipelines used to process digital astronomical images from NASA's Spitzer Space Telescope require multiple input images, in order to generate high-level science and calibration products. The images are grouped into ensembles according to well documented ensemble-creation rules by making explicit associations in the operations Informix database at the Spitzer Science Center (SSC). The advantage of this approach is that a simple database query can retrieve the required ensemble of pipeline input images. New and improved software for ensemble creation has been developed. The new software is much faster than the existing software because it uses pre-compiled database stored-procedures written in Informix SPL (SQL programming language). The new software is also more flexible because the ensemble creation rules are now stored in and read from newly defined database tables. This table-driven approach was implemented so that ensemble rules can be inserted, updated, or deleted without modifying software.

  14. The Wolfgang and Amadeus Automatic Photoelectric Telescopes. A ``Kleine-Nacht-Musik'' during the first five years of routine operation

    Science.gov (United States)

    Granzer, T.; Reegen, P.; Strassmeier, K. G.

    2001-12-01

    We present a summary of five years of continuous operation of the University of Vienna twin Automatic Photoelectric Telescopes (APTs) -- Wolfgang and Amadeus. These two telescopes are part of the Fairborn Observatory facility located in the Sonoran desert close to Washington Camp in southern Arizona. The detection and distinction procedure between weather-induced data-quality loss and systematic data-quality loss turned out to be a crucial task. Therefore, special emphasis is laid on the data quality monitoring tools developed throughout the years. Furthermore, we summarize the scientific highlights from the first five years of operation

  15. SUBARU prime focus spectrograph: integration, testing and performance for the first spectrograph

    Science.gov (United States)

    Madec, F.; Le Fur, A.; Le Mignant, D.; Dohlen, K.; Barrette, R.; Belhadi, M.; Pascal, S.; Smee, S.; Gunn, J.; Le Merrer, J.; Lorred, M.; Jaquet, M.; Balard, P.; Blanchard, P.; Tao, W.; Lapere, V.; Gabriel, J. F.; Loomis, C.; Golebiowski, M.; Hart, M.; Oliveira, L.; Oliveira, A.; Tamura, N.; Shimono, A.

    2016-08-01

    The Prime Focus Spectrograph (PFS) of the Subaru Measurement of Images and Redshifts (SuMIRe) project for Subaru telescope consists in four identical spectrographs fed by 600 fibers each. Each spectrograph is composed by an optical entrance unit that creates a collimated beam and distributes the light to three channels, two visibles and one near infrared. This paper presents the on-going effort for the tests and integration process for the first spectrograph channel: we have developed a detailed Assembly Integration and Test (AIT) plan, as well as the methods, detailed processes and I and T tools. We describe the tools we designed to assemble the parts and to test the performance of the spectrograph. We also report on the thermal acceptance tests we performed on the first visible camera unit. We also report on and discuss the technical difficulties that did appear during this integration phase. Finally, we detail the important logistic process that is require to transport the components from other country to Marseille.

  16. Metrology camera system of prime focus spectrograph for Suburu telescope

    Science.gov (United States)

    Wang, Shiang-Yu; Chou, Richard C. Y.; Huang, Pin-Jie; Ling, Hung-Hsu; Karr, Jennifer; Chang, Yin-Chang; Hu, Yen-Sang; Hsu, Shu-Fu; Chen, Hsin-Yo; Gunn, James E.; Reiley, Dan J.; Tamura, Naoyuki; Takato, Naruhisa; Shimono, Atsushi

    2016-08-01

    The Prime Focus Spectrograph (PFS) is a new optical/near-infrared multi-fiber spectrograph designed for the prime focus of the 8.2m Subaru telescope. PFS will cover a 1.3 degree diameter field with 2394 fibers to complement the imaging capabilities of Hyper SuprimeCam. To retain high throughput, the final positioning accuracy between the fibers and observing targets of PFS is required to be less than 10 microns. The metrology camera system (MCS) serves as the optical encoder of the fiber motors for the configuring of fibers. MCS provides the fiber positions within a 5 microns error over the 45 cm focal plane. The information from MCS will be fed into the fiber positioner control system for the closed loop control. MCS will be located at the Cassegrain focus of Subaru telescope in order to cover the whole focal plane with one 50M pixel Canon CMOS camera. It is a 380mm Schmidt type telescope which generates a uniform spot size with a 10 micron FWHM across the field for reasonable sampling of the point spread function. Carbon fiber tubes are used to provide a stable structure over the operating conditions without focus adjustments. The CMOS sensor can be read in 0.8s to reduce the overhead for the fiber configuration. The positions of all fibers can be obtained within 0.5s after the readout of the frame. This enables the overall fiber configuration to be less than 2 minutes. MCS will be installed inside a standard Subaru Cassgrain Box. All components that generate heat are located inside a glycol cooled cabinet to reduce the possible image motion due to heat. The optics and camera for MCS have been delivered and tested. The mechanical parts and supporting structure are ready as of spring 2016. The integration of MCS will start in the summer of 2016. In this report, the performance of the MCS components, the alignment and testing procedure as well as the status of the PFS MCS will be presented.

  17. OPTICAL I-BAND LINEAR POLARIMETRY OF THE MAGNETAR 4U 0142+61 WITH SUBARU

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Zhongxiang; Tziamtzis, Anestis [Shanghai Astronomical Observatory, Chinese Academy of Sciences, 80 Nandan Road, Shanghai 200030 (China); Tanaka, Yasuyuki T.; Kawabata, Koji S. [Hiroshima Astrophysical Science Center, Hiroshima University, Higashi-Hiroshima, Hiroshima 739-8526 (Japan); Wang, Chen [National Astronomical Observatories, Chinese Academy of Sciences, A20 Datun Road, Beijing 100012 (China); Fukazawa, Yasushi; Itoh, Ryosuke [Department of Physical Sciences, Hiroshima University, Higashi-Hiroshima, Hiroshima 739-8526 (Japan)

    2015-12-01

    Magnetars are known to have optical and/or infrared (IR) emission, but the origin of the emission is not well understood. In order to fully study their emission properties, we have carried out for the first time optical linear polarimetry of the magnetar 4U 0142+61, which has been determined from different observations to have a complicated broadband spectrum over optical and IR wavelengths. From our I-band imaging polarimetric observation, conducted with the 8.2-m Subaru telescope, we determine the degree of linear polarization to be P = 1.0 ± 3.4%, or P ≤ 5.6% (90% confidence level). Considering models that were suggested for optical emission from magnetars, we discuss the implications of our result. The upper limit measurement indicates that, differing from radio pulsars, magnetars probably would not have strongly polarized optical emission if the emission arises from their magnetosphere as suggested.

  18. The Green Bank Telescope: First Full Winter of Operation at 3mm

    Science.gov (United States)

    Lockman, Felix J.

    2017-06-01

    The winter of 2016-2017 marks the first season for the Green Bank Telescope (GBT) with full instrumentation in the 3mm band. ARGUS, a 16-pixel array, provides spectroscopic capabilities over 80-116 GHz. MUSTANG-2, a 223 pixel bolometer array, provides extremely sensitive continuum mapping capabilities over a 30 GHz band centered on 90 GHz at an angular resolution of 9”. In addition, there is a 2-pixel receiver that covers the lower part of the 3mm band, 67-93 GHz, for spectroscopy, continuum measurements, and VLBI.In March, under good night-time conditions, the GBT angular resolution at 109 GHz was measured to be 6.5”. This corresponds to 1.16 lambda/Diameter, exactly as expected from theoretical considerations and identical to the wavelength/Diameter ratio measured at much lower frequencies. Near sidelobe levels are below -20 dB.This poster will review some results that highlight the GBT’s new capabilities in the 3mm band, including new insights into the origin of the anomalous microwave emission, 13CO measurements of a cloud in the Milky Way halo that is in the process making the transition between atomic and molecular gas, HCO+ measurements of infall in a star-forming region, and measurements of dust emission and its spectrum in Orion.The Green Bank Observatory is a facility of the National Science Foundation, operated under a cooperative agreement by Associated Universities, Inc.

  19. Fiber optical cable and connector system (FOCCoS) for PFS/ Subaru

    Science.gov (United States)

    de Oliveira, Antonio Cesar; de Oliveira, Lígia Souza; de Arruda, Marcio V.; Souza Marrara, Lucas; dos Santos, Leandro H.; Ferreira, Décio; dos Santos, Jesulino B.; Rosa, Josimar A.; Junior, Orlando V.; Pereira, Jeferson M.; Castilho, Bruno; Gneiding, Clemens; Junior, Laerte S.; de Oliveira, Claudia M.; Gunn, James; Ueda, Akitoshi; Takato, Naruhisa; Shimono, Atsushi; Sugai, Hajime; Karoji, Hiroshi; Kimura, Masahiko; Tamura, Naoyuki; Wang, Shiang-Yu; Murray, Graham; Le Mignant, David; Madec, Fabrice; Jaquet, Marc; Vives, Sebastien; Fisher, Charlie; Braun, David; Schwochert, Mark; Reiley, Daniel J.

    2014-07-01

    FOCCoS, "Fiber Optical Cable and Connector System" has the main function of capturing the direct light from the focal plane of Subaru Telescope using optical fibers, each one with a microlens in its tip, and conducting this light through a route containing connectors to a set of four spectrographs. The optical fiber cable is divided in 3 different segments called Cable A, Cable B and Cable C. Multi-fibers connectors assure precise connection among all optical fibers of the segments, providing flexibility for instrument changes. To assure strong and accurate connection, these sets are arranged inside two types of assemblies: the Tower Connector, for connection between Cable C and Cable B; and the Gang Connector, for connection between Cable B and Cable A. Throughput tests were made to evaluate the efficiency of the connections. A lifetime test connection is in progress. Cable C is installed inside the PFI, Prime Focus Instrument, where each fiber tip with a microlens is bonded to the end of the shaft of a 2-stage piezo-electric rotatory motor positioner; this assembly allows each fiber to be placed anywhere within its patrol region, which is 9.5mm diameter.. Each positioner uses a fiber arm to support the ferrule, the microlens, and the optical fiber. 2400 of these assemblies are arranged on a motor bench plate in a hexagonal-closed-packed disposition. All optical fibers from Cable C, protected by tubes, pass through the motors' bench plate, three modular plates and a strain relief box, terminating at the Tower Connector. Cable B is permanently installed at Subaru Telescope structure, as a link between Cable C and Cable A. This cable B starts at the Tower Connector device, placed on a lateral structure of the telescope, and terminates at the Gang Connector device. Cable B will be routed to minimize the compression, torsion and bending caused by the cable weight and telescope motion. In the spectrograph room, Cable A starts at the Gang Connector, crosses a

  20. Operation of the University of Hawaii 2.2M telescope on Mauna Kea

    Science.gov (United States)

    Hall, Donald N. B.

    1991-10-01

    NASA's planetary astronomy program provides part of the funding for the 2.2 meter telescope. The parameters for time on the telescope are laid out. A major instrumental highlight has been the commissioning of a 256 x 256 near infrared camera which uses a Rockwell NICMOS-3 array. At the f/10 focus, image scales of 0.37 and 0.75 arcsec/pixel are available. A new, high quantum efficiency Tektronix 1024 x 1024 CCD saw first light on the telescope in 1991, and was available regularly from April 1991. Data from both of these detectors are transmitted directly to the Sun workstation for immediate analysis by the observers. The autoguider software was enhanced to permit guided tracking on objects have nonsideral motions (i.e., solar system objects).

  1. Performance of the Digital Science Partnership Remotely-Operated 0.5-Meter Corrected Dall-Kirkham Telescopes

    Science.gov (United States)

    Kielkopf, John F.; Carter, B.; Brown, C.; Hart, R.; Hay, J.; Waite, I.

    2007-12-01

    The Digital Science Partnership, a collaboration of the University of Louisville and the University of Southern Queensland, operates a pair of 0.5-meter telescopes for teaching, research, and informal education. The instruments were installed at sites near Toowoomba, Australia, and Louisville, Kentucky in 2006. The Planewave Instruments optical systems employ a unique Dall-Kirkham design incorporating a two-element corrector that demagnifies the image, flattens the focal plane, and reduces coma. These instruments have a moderately fast f/6.8 focal ratio and maintain image quality with little vignetting over a field 42 mm in diameter (0.7 degree). With a 9-micron pixel CCD such as the KAF-6303E, the image scale of 0.55 seconds of arc per pixel typically yields seeing-limited image quality at our sites. The telescopes and their enclosure are operated in a live remote observing mode through Linux-based software, including a dome-control system that uses RFID tags for absolute rotation encoding. After several months of testing and development we have examples of images and photometry from both sites that illustrate the performance of the system. We will discuss image quality, as well as practical matters such as pointing accuracy and field acquisition, auto-guiding, communication latency in large file transfer, and our experience with remote observing assisted by teleconferencing. Time-delay-integration (TDI) imaging, in which the telescope is stationary while the CCD is clocked to track in right ascension, is under study. The technique offers wide fields of view with very high signal-to-noise ratio, and can be implemented in robotically operated instruments used in monitoring, rapid-response, and educational programs. Results for conventional and TDI imaging from the dark site in Australia compared to the brighter suburban site in Kentucky show the benefits of access to dark sites through international partnerships that remote operation technology offers.

  2. How Long Can the Hubble Space Telescope Operate Reliably? A Total Dose Perspective

    Science.gov (United States)

    Xapsos, M. A.; Stauffer, C.; Jordan, T.; Poivey, C.; Haskins, D. N.; Lum, G.; Pergosky, A. M.; Smith, D. C.; LaBel, K. A.

    2014-01-01

    The Hubble Space Telescope has been at the forefront of discoveries in the field of astronomy for more than 20 years. It was the first telescope designed to be serviced in space and the last such servicing mission occurred in May 2009. The question of how much longer this valuable resource can continue to return science data remains. In this paper a detailed analysis of the total dose exposure of electronic parts at the box level is performed using solid angle sectoring/3-dimensional ray trace and Monte Carlo radiation transport simulations. Results are related to parts that have been proposed as possible total dose concerns. The spacecraft subsystem that appears to be at the greatest risk for total dose failure is identified. This is discussed with perspective on the overall lifetime of the spacecraft.

  3. ONE-METER TELESCOPE IN KOLONICA SADDLE - 4 YEARS OF OPERATION

    OpenAIRE

    Kudzej, I.; Dubovsky, P.

    2010-01-01

    The actual technical status of 1 meterVihorlat National Telescope (VNT) at AstronomicalObservatory at Kolonica Saddle is presented.Cassegrain and Nasmyth focus, autoguiding system,computer controlled focusing and fine movements andother improvements achieved recently. For two channelphotoelectric photometer the system of channelscalibration based on artificial light source is described.For CCD camera FLI PL1001E actually installed inCassegrain focus we presents transformation coefficientsfrom...

  4. Subaru High-z Exploration of Low-Luminosity Quasars (SHELLQs): New z > 6 Quasar Survey with Subaru/HSC

    Science.gov (United States)

    Matsuoka, Yoshiki; SHELLQs Collaboration

    2017-01-01

    Quasars at high redshift are an important and unique probe of the distant Universe, for understanding the origin and progress of cosmic reionization, the early growth of supermassive black holes, and the evolution of quasar host galaxies and their dark matter halos, among other topics. We are currently carrying out a new spectroscopic survey, called SHELLQs (Subaru High-z Exploration of Low-Luminosity Quasars), to search for low-luminosity quasars at z > 6. By exploiting the exquisite imaging data produced by the Subaru Hyper Suprime-Cam (HSC) survey, we aim to probe quasar luminosities down to M1450 ~ -22 mag, i.e., below the classical threshold between quasars and Seyfert galaxies. Candidate selection is performed by combining several photometric approaches including a Bayesian probabilistic algorithm. A large spectroscopic observing program is underway, using Subaru/FOCAS, GTC/OSIRIS, and Gemini/GMOS; in particular, SHELLQs has been approved as a Subaru intensive program to use 20 nights in the coming four semesters. As of August 2016, we have discovered ~40 quasars and bright galaxies at z ~ 6 and beyond, from the first 100 deg2 of the HSC survey (Matsuoka et al. 2016, ApJ, 828, 26). Surprisingly, we are starting to see the steep rise of the luminosity function of high-z galaxies, compared with that of quasars, at magnitudes fainter than M1450 ~ -22 mag or zAB ~ 24 mag. Multi-wavelength follow-up studies of the discovered objects as well as further survey observations are ongoing.

  5. Ten years maintaining MACAO-VLTI units in operation in the Very Large Telescope at Paranal Observatory

    Science.gov (United States)

    Salgado, F.; Hudepohl, G.

    2016-07-01

    More than 10 years have already passed since the first Multiple Application Curvature Adaptive Optics (MACAO) facilities got the first light in UT2 the 18th of April, 2003, in the Very Large Telescope (VLT) at Paranal Observatory. The achievable image sharpness of a ground-based telescope is normally limited by the effect of atmospheric turbulence. However, with Adaptive Optics (AO) techniques, this major drawback can be overcome so that the telescope produces images that are as sharp as theoretically possible, i.e., as if they were taken from space. [1] The intention of this document is summarize in few pages some highlights related with the activities needed to keep MACAO units in operation. Some statistics of problems based in Action Remedy tool is included, showing how through these years the number of problems has been reduced, even when there are still some unsolved ones. Some lessons have been learned and there are others one to learn. Corrective and predictive maintenance performed are shown too like the current measurements, transfer functions measurements, thermography pictures, health checks measuring interaction matrix and flat vectors to detect dead APDs or short circuits in the DM, etc. Some forced interventions are included as well like the removal of the cabinets from Coude rooms to avoid that acoustic noise and vibrations perturb the operations, the deformable mirrors reached by cooling leaks and a mirror that got rusty are shown too. Well knowledge of the system, good interaction between different disciplines groups to perform corrective and preventive maintenance seems to be key aspects of keeping it under control and operative during all these years leading to this good result.

  6. Notice of Intent to Prepare a Comprehensive Environmental Evaluation (CEE) for the Construction and Operation of a High-Energy Neutrino Telescope (Project Ice Cube) at the South Pole

    CERN Multimedia

    2003-01-01

    Request for comments from the NSF for a proposed project to construct and operate a high-energy neutrino telescope at the South Pole. The proposed telescope would be a second-generation instrument based on the successful evolution of a smaller neutrino telescope at the South Pole (1 page).

  7. ESO Telescope Designer Raymond Wilson Wins Prestigious Kavli Award for Astrophysics

    Science.gov (United States)

    2010-06-01

    with four individual telescopes with 17.5 cm thick 8.2-metre mirrors. Active optics has contributed towards making the VLT the world's most successful ground-based observatory and will be an integral part of ESO's European Extremely Large Telescope (E-ELT) project. Active optics technology is also part of the twin 10-metre Keck telescopes, the Subaru telescope's 8.2-metre mirror and the two 8.1-metre Gemini telescopes. Co-prize winners Jerry Nelson and Roger Angel respectively pioneered the use of segmentation in telescope primary mirrors - as used on the Keck telescopes, and the development of lightweight mirrors with short focal ratios. A webcast from Oslo, Norway, announcing the prize winners is available at www.kavlifoundation.org and www.kavliprize.no. More information ESO, the European Southern Observatory, is the foremost intergovernmental astronomy organisation in Europe and the world's most productive astronomical observatory. It is supported by 14 countries: Austria, Belgium, the Czech Republic, Denmark, France, Finland, Germany, Italy, the Netherlands, Portugal, Spain, Sweden, Switzerland and the United Kingdom. ESO carries out an ambitious programme focused on the design, construction and operation of powerful ground-based observing facilities enabling astronomers to make important scientific discoveries. ESO also plays a leading role in promoting and organising cooperation in astronomical research. ESO operates three unique world-class observing sites in Chile: La Silla, Paranal and Chajnantor. At Paranal, ESO operates the Very Large Telescope, the world's most advanced visible-light astronomical observatory and VISTA, the world's largest survey telescope. ESO is the European partner of a revolutionary astronomical telescope ALMA, the largest astronomical project in existence. ESO is currently planning a 42-metre European Extremely Large optical/near-infrared Telescope, the E-ELT, which will become "the world's biggest eye on the sky".

  8. ATST telescope mount: telescope of machine tool

    Science.gov (United States)

    Jeffers, Paul; Stolz, Günter; Bonomi, Giovanni; Dreyer, Oliver; Kärcher, Hans

    2012-09-01

    The Advanced Technology Solar Telescope (ATST) will be the largest solar telescope in the world, and will be able to provide the sharpest views ever taken of the solar surface. The telescope has a 4m aperture primary mirror, however due to the off axis nature of the optical layout, the telescope mount has proportions similar to an 8 meter class telescope. The technology normally used in this class of telescope is well understood in the telescope community and has been successfully implemented in numerous projects. The world of large machine tools has developed in a separate realm with similar levels of performance requirement but different boundary conditions. In addition the competitive nature of private industry has encouraged development and usage of more cost effective solutions both in initial capital cost and thru-life operating cost. Telescope mounts move relatively slowly with requirements for high stability under external environmental influences such as wind buffeting. Large machine tools operate under high speed requirements coupled with high application of force through the machine but with little or no external environmental influences. The benefits of these parallel development paths and the ATST system requirements are being combined in the ATST Telescope Mount Assembly (TMA). The process of balancing the system requirements with new technologies is based on the experience of the ATST project team, Ingersoll Machine Tools who are the main contractor for the TMA and MT Mechatronics who are their design subcontractors. This paper highlights a number of these proven technologies from the commercially driven machine tool world that are being introduced to the TMA design. Also the challenges of integrating and ensuring that the differences in application requirements are accounted for in the design are discussed.

  9. A Student's Hands-on Introduction to Radio Astronomy With the Simple Construction, Operation and Testing, Utilizing Commonly Available Materials, of a Functioning Solar Radio Telescope

    Science.gov (United States)

    Knight, D.

    2016-12-01

    Our study of the Sun, an object that provides life to this planet but also is a serious threat to the existence we now enjoy, is frequently limited in hands-on activities by the unavailability of the necessary observational tools. While small optical telescopes are more easily obtained, telescopes that work the other regions of the electromagnetic spectrum, such as the radio frequencies, are unusual. Radio emissions from solar storms, however, can be "viewed" by a student constructing a simple, tunable and inexpensive radio telescope designed to receive the most common radio frequencies broadcast from the Sun during such a storm. The apparatus employs normally available materials and technology in new purposes. Utilizing this telescope, students have the ability to test and modify its design for changes in frequency and signal amplitude, and therefore examine a wide spectrum of radio emission emanating from our star. This engaging introduction to radio electronics not only involves the study of the electrical circuit involved, but also sets the student up for detailed study in the form of specific research projects focusing on solar activity in the radio wavelengths. So far, my students have been actively involved in varying the electrical properties of a simple one-transistor circuit that selects the observational frequencies of the solar radio telescope they have constructed. Student research projects also have examined antenna design in terms of directionality and signal strength gain. In the future, collaboration is possible to link student observers in different locations on this planet, allowing for significant peer evaluation and cooperation. NASA's "Project Jove", a program that Sonoma Valley High School and Robert Ferguson Observatory have been connected with since about the year 2000, already has a worldwide collaboration network in place for similar student-operated radio telescopes for primarily studying Jupiter. Because of the higher frequencies with

  10. Holographic telescope

    Science.gov (United States)

    Odhner, Jefferson E.

    2016-07-01

    Holographic optical elements (HOEs) work on the principal of diffraction and can in some cases replace conventional optical elements that work on the principal of refraction. An HOE can be thinner, lighter, can have more functionality, and can be lower cost than conventional optics. An HOE can serve as a beam splitter, spectral filter, mirror, and lens all at the same time. For a single wavelength system, an HOE can be an ideal solution but they have not been widely accepted for multispectral systems because they suffer from severe chromatic aberration. A refractive optical system also suffers from chromatic aberration but it is generally not as severe. To color correct a conventional refractive optical system, a flint glass and a crown glass are placed together such that the color dispersion of the flint and the crown cancel each other out making an achromatic lens (achromat) and the wavelengths all focus to the same point. The color dispersion of refractive lenses and holographic lenses are opposite from each other. In a diffractive optical system, long wavelengths focus closer (remember for HOEs: RBM "red bends more") than nominal focus while shorter wavelengths focus further out. In a refractive optical system, it is just the opposite. For this reason, diffractives can be incorporated into a refractive system to do the color correction and often cut down on the number of optical elements used [1.]. Color correction can also be achieved with an all-diffractive system by combining a holographic optical element with its conjugate. In this way the color dispersion of the first holographic optical element can be cancelled by the color dispersion of the second holographic optic. It is this technique that will be exploited in this paper to design a telescope made entirely of holographic optical elements. This telescope could be more portable (for field operations) the same technique could be used to make optics light enough for incorporation into a UAV.

  11. Initial experience with a robotically operated video optical telescopic-microscope in cranial neurosurgery: feasibility, safety, and clinical applications.

    Science.gov (United States)

    Gonen, Lior; Chakravarthi, Srikant S; Monroy-Sosa, Alejandro; Celix, Juanita M; Kojis, Nathaniel; Singh, Maharaj; Jennings, Jonathan; Fukui, Melanie B; Rovin, Richard A; Kassam, Amin B

    2017-05-01

    OBJECTIVE The move toward better, more effective optical visualization in the field of neurosurgery has been a focus of technological innovation. In this study, the authors' objectives are to describe the feasibility and safety of a new robotic optical platform, namely, the robotically operated video optical telescopic-microscope (ROVOT-m), in cranial microsurgical applications. METHODS A prospective database comprising patients who underwent a cranial procedure between April 2015 and September 2016 was queried, and the first 200 patients who met the inclusion criteria were selected as the cohort for a retrospective chart review. Only adults who underwent microsurgical procedures in which the ROVOT-m was used were considered for the study. Preoperative, intraoperative, and postoperative data were retrieved from electronic medical records. The authors address the feasibility and safety of the ROVOT-m by studying various intraoperative variables and by reporting perioperative morbidity and mortality, respectively. To assess the learning curve, cranial procedures were categorized into 6 progressively increasing complexity groups. The main categories of pathology were I) intracerebral hemorrhages (ICHs); II) intraaxial tumors involving noneloquent regions or noncomplex extraaxial tumors; III) intraaxial tumors involving eloquent regions; IV) skull base pathologies; V) intraventricular lesions; and VI) cerebrovascular lesions. In addition, the entire cohort was evenly divided into early and late cohorts. RESULTS The patient cohort comprised 104 female (52%) and 96 male (48%) patients with a mean age of 56.7 years. The most common pathological entities encountered were neoplastic lesions (153, 76.5%), followed by ICH (20, 10%). The distribution of cases by complexity categories was 11.5%, 36.5%, 22%, 20%, 3.5%, and 6.5% for Categories I, II, II, IV, V, and VI, respectively. In all 200 cases, the surgical goal was achieved without the need for intraoperative conversion

  12. Seasonal variation of the radial brightness contrast of Saturn's rings viewed in mid-infrared by Subaru/COMICS

    Science.gov (United States)

    Fujiwara, Hideaki; Morishima, Ryuji; Fujiyoshi, Takuya; Yamashita, Takuya

    2017-03-01

    Aims: This paper investigates the mid-infrared (MIR) characteristics of Saturn's rings. Methods: We collected and analyzed MIR high spatial resolution images of Saturn's rings obtained in January 2008 and April 2005 with the COoled Mid-Infrared Camera and Spectrometer (COMICS) mounted on the Subaru Telescope, and investigated the spatial variation in the surface brightness of the rings in multiple bands in the MIR. We also composed the spectral energy distributions (SEDs) of the C, B, and A rings and the Cassini Division, and estimated the temperatures of the rings from the SEDs assuming the optical depths. Results: We found that the C ring and the Cassini Division were warmer than the B and A rings in 2008, which could be accounted for by their lower albedos, lower optical depths, and smaller self-shadowing effect. We also fonud that the C ring and the Cassini Division were considerably brighter than the B and A rings in the MIR in 2008 and the radial contrast of the ring brightness is the inverse of that in 2005, which is interpreted as a result of a seasonal effect with changing elevations of the Sun and observer above the ring plane. The reduced images (FITS files) are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/599/A29

  13. Temperature-Dependent Refractive Index Measurements of L-BBH2 Glass for the Subaru CHARIS Integral Field Spectrograph

    Science.gov (United States)

    Leviton, Douglas B.; Miller, Kevin H.; Quijada, Manuel A.; Groff, Tyler D.

    2015-01-01

    Using the Cryogenic High Accuracy Refraction Measuring System (CHARMS) at NASA's Goddard Space Flight Center, we have made the first cryogenic measurements of absolute refractive index for Ohara L-BBH2 glass to enable the design of a prism for the Coronagraphic High Angular Resolution Imaging Spectrograph (CHARIS) at the Subaru telescope. L-BBH2 is employed in CHARIS's prism design for improving the spectrograph's dispersion uniformity. Index measurements were made at temperatures from 110 to 305 K at wavelengths from 0.46 to 3.16 micron. We report absolute refractive index (n), dispersion (dn/d(lambda), and thermo-optic coefficient (dn/dT) for this material along with estimated single measurement uncertainties as a function of wavelength and temperature. We provide temperature-dependent Sellmeier coefficients based on our data to allow accurate interpolation of index to other wavelengths and temperatures within applicable ranges. This paper also speaks of the challenges in measuring index for a material which is not available in sufficient thickness to fabricate a typical prism for measurement in CHARMS, the tailoring of the index prism design that allowed these index measurements to be made, and the remarkable results obtained from that prism for this practical infrared material.

  14. Cloud top structure of Venus revealed by Subaru/COMICS mid-infrared images

    Science.gov (United States)

    Sato, T. M.; Sagawa, H.; Kouyama, T.; Mitsuyama, K.; Satoh, T.; Ohtsuki, S.; Ueno, M.; Kasaba, Y.; Nakamura, M.; Imamura, T.

    2014-11-01

    We have investigated the cloud top structure of Venus by analyzing ground-based images taken at the mid-infrared wavelengths of 8.66 μm and 11.34 μm. Venus at a solar phase angle of ∼90°, with the morning terminator in view, was observed by the Cooled Mid-Infrared Camera and Spectrometer (COMICS), mounted on the 8.2-m Subaru Telescope, during the period October 25-29, 2007. The disk-averaged brightness temperatures for the observation period are ∼230 K and ∼238 K at 8.66 μm and 11.34 μm, respectively. The obtained images with good signal-to-noise ratio and with high spatial resolution (∼200 km at the sub-observer point) provide several important findings. First, we present observational evidence, for the first time, of the possibility that the westward rotation of the polar features (the hot polar spots and the surrounding cold collars) is synchronized between the northern and southern hemispheres. Second, after high-pass filtering, the images reveal that streaks and mottled and patchy patterns are distributed over the entire disk, with typical amplitudes of ∼0.5 K, and vary from day to day. The detected features, some of which are similar to those seen in past UV images, result from inhomogeneities of both the temperature and the cloud top altitude. Third, the equatorial center-to-limb variations of brightness temperatures have a systematic day-night asymmetry, except those on October 25, that the dayside brightness temperatures are higher than the nightside brightness temperatures by 0-4 K under the same viewing geometry. Such asymmetry would be caused by the propagation of the migrating semidiurnal tide. Finally, by applying the lapse rates deduced from previous studies, we demonstrate that the equatorial center-to-limb curves in the two spectral channels give access to two parameters: the cloud scale height H and the cloud top altitude zc. The acceptable models for data on October 25 are obtained at H = 2.4-4.3 km and zc = 66-69 km; this supports

  15. The James Webb Space Telescope's Plan for Operations and Instrument Capabilities for Observations in the Solar System

    Science.gov (United States)

    Milam, Stefanie N.; Stansberry, John A.; Sonneborn, George; Thomas, Cristina

    2016-01-01

    The James Webb Space Telescope (JWST) is optimized for observations in the near- and mid-infrared and will provide essential observations for targets that cannot be conducted from the ground or other missions during its lifetime. The state-of-the-art science instruments, along with the telescope's moving target tracking, will enable the infrared study, with unprecedented detail, for nearly every object (Mars and beyond) in the Solar System. The goals of this special issue are to stimulate discussion and encourage participation in JWST planning among members of the planetary science community. Key science goals for various targets, observing capabilities for JWST, and highlights for the complementary nature with other missions/observatories are described in this paper.

  16. The Subaru Fauresmith 200km Challenge: Looking a Gift-Horse in ...

    African Journals Online (AJOL)

    This article describes an equestrian sport known as 'endurance riding.' It focuses on the Subaru Fauresmith 200km Challenge, which is held every year in the small southern Free State town of Fauresmith. Given the steadily growing profi le of the event, both locally and internationally, it is argued that the time is ripe for ...

  17. Taiwan Automated Telescope Network

    Directory of Open Access Journals (Sweden)

    Dean-Yi Chou

    2010-01-01

    can be operated either interactively or fully automatically. In the interactive mode, it can be controlled through the Internet. In the fully automatic mode, the telescope operates with preset parameters without any human care, including taking dark frames and flat frames. The network can also be used for studies that require continuous observations for selected objects.

  18. SNAP telescope

    Energy Technology Data Exchange (ETDEWEB)

    Lampton, Michael L.; Akerlof, C.W.; Aldering, G.; Amanullah, R.; Astier, P.; Barrelet, E.; Bebek, C.; Bergstrom, L.; Bercovitz, J.; Bernstein, G.; Bester, M.; Bonissent, A.; Bower, C.; Carithers Jr., W.C.; Commins, E.D.; Day, C.; Deustua, S.E.; DiGennaro, R.; Ealet, A.; Ellis,R.S.; Eriksson, M.; Fruchter, A.; Genat, J.-F.; Goldhaber, G.; Goobar,A.; Groom, D.; Harris, S.E.; Harvey, P.R.; Heetderks, H.D.; Holland,S.E.; Huterer, D.; Karcher, A.; Kim, A.G.; Kolbe, W.; Krieger, B.; Lafever, R.; Lamoureux, J.; Levi, M.E.; Levin, D.S.; Linder, E.V.; Loken,S.C.; Malina, R.; Massey, R.; McKay, T.; McKee, S.P.; Miquel, R.; Mortsell, E.; Mostek, N.; Mufson, S.; Musser, J.; Nugent, P.; Oluseyi,H.; Pain, R.; Palaio, N.; Pankow, D.; Perlmutter, S.; Pratt, R.; Prieto,E.; Refregier, A.; Rhodes, J.; Robinson, K.; Roe, N.; Sholl, M.; Schubnell, M.; Smadja, G.; Smoot, G.; Spadafora, A.; Tarle, G.; Tomasch,A.; von der Lippe, H.; Vincent, R.; Walder, J.-P.; Wang, G.; Wang, G.

    2002-07-29

    The SuperNova/Acceleration Probe (SNAP) mission will require a two-meter class telescope delivering diffraction limited images spanning a one degree field in the visible and near infrared wavelength regime. This requirement, equivalent to nearly one billion pixel resolution, places stringent demands on its optical system in terms of field flatness, image quality, and freedom from chromatic aberration. We discuss the advantages of annular-field three-mirror anastigmat (TMA) telescopes for applications such as SNAP, and describe the features of the specific optical configuration that we have baselined for the SNAP mission. We discuss the mechanical design and choice of materials for the telescope. Then we present detailed ray traces and diffraction calculations for our baseline optical design. We briefly discuss stray light and tolerance issues, and present a preliminary wavefront error budget for the SNAP Telescope. We conclude by describing some of tasks to be carried out during the upcoming SNAP research and development phase.

  19. Space Telescopes

    Science.gov (United States)

    Rigby, Jane R.

    2011-01-01

    The science of astronomy depends on modern-day temples called telescopes. Astronomers make pilgrimages to remote mountaintops where these large, intricate, precise machines gather light that rains down from the Universe. Bit, since Earth is a bright, turbulent planet, our finest telescopes are those that have been launched into the dark stillness of space. These space telescopes, named after heroes of astronomy (Hubble, Chandra, Spitzer, Herschel), are some of the best ideas our species has ever had. They show us, over 13 billion years of cosmic history, how galaxies and quasars evolve. They study planets orbiting other stars. They've helped us determine that 95% of the Universe is of unknown composition. In short, they tell us about our place in the Universe. The next step in this journey is the James Webb Space Telescope, being built by NASA, Europe, and Canada for a 2018 launch; Webb will reveal the first galaxies that ever formed.

  20. Space Telescopes

    Science.gov (United States)

    2010-01-01

    Proc 6317:OT1–OT9 Serlemitsos PJ, Jahota L, Soong Y (plus 14 authors) (1995) The X-ray telescope on board ASCA. Pub Astron Soc Jap 47:105–114...Serlemitsos PJ, Soong Y, Chan K-W (plus 31 authors) (2007) The X-ray telescope on board Suzaku. Pub Astron Soc Jap 59:9–21 Shimizu T (2004) Solar-B solar

  1. The Liverpool Telescope

    Science.gov (United States)

    Smith, Robert J.; Bates, S. D.; Clay, Neil R.; Fraser, Stephen N.; Marchant, J. M.; Mottram, C. J.; Steele, I. A.; Tomlinson, M. D.

    2011-03-01

    The Liverpool Telescope (LT) is a fully robotic 2m optical telescope at a world-class observatory site. It runs autonomously without direct human control either on site or remotely. It is not operated primarily for a single science project, but rather is a common-user facility, time allocated by an open, peer-review process and conducting a variety of optical and IR imaging, spectroscopic and polarimetric programs. This paper describes some of aspects of the site infrastructure and instrument suite designed specifically to support robust and reliable unsupervised operations. Aside from the telescope hardware, the other aspect of robotic operations is the mechanisms whereby users interact with the telescope and its automated scheduler. We describe how these have been implemented for the LT. Observing routinely since 2004, the LT has demonstrated it is possible to operate a large, common-user robotic observatory. Making the most of the flexibility afforded by fully robotic operations, development continues in collaboration with both observers and other observatories to develop observing modes to enable new science across the broad discipline of time-domain astrophysics.

  2. Volume phase holographic gratings for the Subaru Prime Focus Spectrograph: performance measurements of the prototype grating set

    Science.gov (United States)

    Barkhouser, Robert H.; Arns, James; Gunn, James E.

    2014-08-01

    The Prime Focus Spectrograph (PFS) is a major instrument under development for the 8.2 m Subaru telescope on Mauna Kea. Four identical, fixed spectrograph modules are located in a room above one Nasmyth focus. A 55 m fiber optic cable feeds light into the spectrographs from a robotic fiber positioner mounted at the telescope prime focus, behind the wide field corrector developed for Hyper Suprime-Cam. The positioner contains 2400 fibers and covers a 1.3 degree hexagonal field of view. Each spectrograph module will be capable of simultaneously acquiring 600 spectra. The spectrograph optical design consists of a Schmidt collimator, two dichroic beamsplitters to separate the light into three channels, and for each channel a volume phase holographic (VPH) grating and a dual- corrector, modified Schmidt reimaging camera. This design provides a 275 mm collimated beam diameter, wide simultaneous wavelength coverage from 380 nm to 1.26 µm, and good imaging performance at the fast f/1.1 focal ratio required from the cameras to avoid oversampling the fibers. The three channels are designated as the blue, red, and near-infrared (NIR), and cover the bandpasses 380-650 nm (blue), 630-970 nm (red), and 0.94-1.26 µm (NIR). A mosaic of two Hamamatsu 2k×4k, 15 µm pixel CCDs records the spectra in the blue and red channels, while the NIR channel employs a 4k×4k, substrate-removed HAWAII-4RG array from Teledyne, with 15 µm pixels and a 1.7 µm wavelength cutoff. VPH gratings have become the dispersing element of choice for moderate-resolution astronomical spectro- graphs due their potential for very high diffraction efficiency, low scattered light, and the more compact instru- ment designs offered by transmissive dispersers. High quality VPH gratings are now routinely being produced in the sizes required for instruments on large telescopes. These factors made VPH gratings an obvious choice for PFS. In order to reduce risk to the project, as well as fully exploit the performance

  3. A large sample of shear-selected clusters from the Hyper Suprime-Cam Subaru Strategic Program S16A Wide field mass maps

    Science.gov (United States)

    Miyazaki, Satoshi; Oguri, Masamune; Hamana, Takashi; Shirasaki, Masato; Koike, Michitaro; Komiyama, Yutaka; Umetsu, Keiichi; Utsumi, Yousuke; Okabe, Nobuhiro; More, Surhud; Medezinski, Elinor; Lin, Yen-Ting; Miyatake, Hironao; Murayama, Hitoshi; Ota, Naomi; Mitsuishi, Ikuyuki

    2017-12-01

    We present the result of searching for clusters of galaxies based on weak gravitational lensing analysis of the ˜160 deg2 area surveyed by Hyper Suprime-Cam (HSC) as a Subaru Strategic Program. HSC is a new prime focus optical imager with a 1.5°-diameter field of view on the 8.2 m Subaru telescope. The superb median seeing on the HSC i-band images of 0{^''.}56 allows the reconstruction of high angular resolution mass maps via weak lensing, which is crucial for the weak lensing cluster search. We identify 65 mass map peaks with a signal-to-noise (S/N) ratio larger than 4.7, and carefully examine their properties by cross-matching the clusters with optical and X-ray cluster catalogs. We find that all the 39 peaks with S/N > 5.1 have counterparts in the optical cluster catalogs, and only 2 out of the 65 peaks are probably false positives. The upper limits of X-ray luminosities from the ROSAT All Sky Survey (RASS) imply the existence of an X-ray underluminous cluster population. We show that the X-rays from the shear-selected clusters can be statistically detected by stacking the RASS images. The inferred average X-ray luminosity is about half that of the X-ray-selected clusters of the same mass. The radial profile of the dark matter distribution derived from the stacking analysis is well modeled by the Navarro-Frenk-White profile with a small concentration parameter value of c500 ˜ 2.5, which suggests that the selection bias on the orientation or the internal structure for our shear-selected cluster sample is not strong.

  4. Telescopes in education

    Science.gov (United States)

    Yessayian, Rick

    Imagine sitting in your classroom with your students and controlling a Research Grade 24 inch telescope. You control where it points, you control the duration of the exposure of a high grade CCD camera, and you control all of this within your school day, on a camera half way around the globe, in real time. You can hear the telescope moving, talk to the operator sitting atop historic Mt. Wilson Observatory in California. You might be looking at comets, asteroids, galaxies, nebulas or a host of other interesting celestial objects. Perhaps you have students that are up to a real challenge -- doing real science! Students in our program have contributed the discovery of a new variable star, to the Pluto Express project, to the search for supernovas, and the collection of images of intersecting galaxies. These are among the many possible projects you might choose from. The age and ability of your students are taken into account when you choose your project. Students from Kindergarten through Grade 12 have participated in this free program. A new robotic telescope was added at Mount Wilson in 1999. The telescope is a Celestron 14" SCT mounted on a Bisque Paramount GT-1100 with an Apogee AP-7 CCD camera (512X512 pixels). In the Spring of 2001, we duplicated the 14" robotic telescope configuration and placed it at the Las Campanas Observatory, Chile (operated by the Carnegie Observatories). I installed the system in late September, 2001, and we began testing. The system requires one more upgrade and some hardware adjustments, which I will complete in June, 2002. We duplicated another 14" robotic telescope, and sent it to Brisbane Australia in January, 2002. The grand opening of the telescope will be in August 2002.

  5. Robotic and Survey Telescopes

    Science.gov (United States)

    Woźniak, Przemysław

    Robotic telescopes are revolutionizing the way astronomers collect their dataand conduct sky surveys. This chapter begins with a discussion of principles thatguide the process of designing, constructing, and operating telescopes andobservatories that offer a varying degree of automation, from instruments remotelycontrolled by observers to fully autonomous systems requiring no humansupervision during their normal operations. Emphasis is placed on designtrade-offs involved in building end-to-end systems intended for a wide range ofscience applications. The second part of the chapter contains descriptions ofseveral projects and instruments, both existing and currently under development.It is an attempt to provide a representative selection of actual systems thatillustrates state of the art in technology, as well as important ideas and milestonesin the development of the field. The list of presented instruments spans the fullrange in size starting from small all-sky monitors, through midrange robotic andsurvey telescopes, and finishing with large robotic instruments and surveys.Explosive growth of telescope networking is enabling entirely new modesof interaction between the survey and follow-up observing. Increasingimportance of standardized communication protocols and software is stressed.These developments are driven by the fusion of robotic telescope hardware,massive storage and databases, real-time knowledge extraction, and datacross-correlation on a global scale. The chapter concludes with examplesof major science results enabled by these new technologies and futureprospects.

  6. Kashima 34-m Radio Telescope

    Science.gov (United States)

    Sekido, Mamoru; Kawai, Eiji

    2013-01-01

    The Kashima 34-m radio telescope has been continuously operated and maintained by the National Institute of Information and Communications Technology (NICT) as a facility of the Kashima Space Technology Center (KSTC) in Japan. This brief report summarizes the status of this telescope, the staff, and activities during 2012.

  7. The South Pole Telescope

    Energy Technology Data Exchange (ETDEWEB)

    Ruhl, J.E.; Ade, P.A.R.; Carlstrom, J.E.; Cho, H.M.; Crawford,T.; Dobbs, M.; Greer, C.H.; Halverson, N.W.; Holzapfel, W.L.; Lanting,T.M.; Lee, A.T.; Leitch, E.M.; Leong, J.; Lu, W.; Lueker, M.; Mehl, J.; Meyer, S.S.; Mohr, J.J.; Padin, S.; Plagge, T.; Pryke, C.; Runyan, M.C.; Schwan, D.; Sharp, M.K.; Spieler, H.; Staniszewski, Z.; Stark, A.A.

    2004-11-04

    A new 10 meter diameter telescope is being constructed for deployment at the NSF South Pole research station. The telescope is designed for conducting large-area millimeter and sub-millimeter wave surveys of faint, low contrast emission, as required to map primary and secondary anisotropies in the cosmic microwave background. To achieve the required sensitivity and resolution, the telescope design employs an off-axis primary with a 10 m diameter clear aperture. The full aperture and the associated optics will have a combined surface accuracy of better than 20 microns rms to allow precision operation in the submillimeter atmospheric windows. The telescope will be surrounded with a large reflecting ground screen to reduce sensitivity to thermal emission from the ground and local interference. The optics of the telescope will support a square degree field of view at 2mm wavelength and will feed a new 1000-element micro-lithographed planar bolometric array with superconducting transition-edge sensors and frequency-multiplexed readouts. The first key project will be to conduct a survey over 4000 degrees for galaxy clusters using the Sunyaev-Zeldovich Effect. This survey should find many thousands of clusters with a mass selection criteria that is remarkably uniform with redshift. Armed with redshifts obtained from optical and infrared follow-up observations, it is expected that the survey will enable significant constraints to be placed on the equation of state of the dark energy.

  8. First light observation of GIGMICS (germanium immersion grating mid-infrared cryogenic spectrograph) by Kanata 1.5-m Telescope at Higashi-Hiroshima Observatory

    Science.gov (United States)

    Hirahara, Yasuhiro; Aoki, Keishin; Ohta, Kanako; Shibata, Sho; Hirao, Tsuyoshi; Tatamitani, Yoshio; Ebizuka, Noboru; Kawabata, Koji S.; Yoshida, Michitoshi; Uemura, Makoto; Oosugi, Takashi; Kawaguchi, Kentaro; Fujimori, Ryuji; Ohiwa, Hiroki; Nagahiro, Hisayuki

    2012-09-01

    We have developed a germanium immersion grating mid-infrared cryogenic spectrograph (GIGMICS) designed for the Nasmyth focus stage of NAOJ Subaru 8.2-m telescope, which operates at N-band (8-13 μm) in wavelength (λ) with maximum resolving power R(≡λ/Δλ) ~ 50,000. A single crystal germanium echelle immersion grating (30 × 30 × 72 mm) for collimated beam size of 28 mmφ was fabricated by utilizing ultra precision micro-grinding method coupled with the ELID (ELectrolytic In-process Dressing) technique (Ohmori, H. 1992, Ebizuka et al. 2003, Tokoro et al. 2003). After the critical test for the application to the laboratory gas-phase IR high-resolution spectroscopy(Hirahara et al. 2010), we have conducted the "first light" astronomical observation of GIGMICS by the Kanata 1.5-m telescope at Higashi- Hiroshima Observatory from January to April, 2011. Toward many astronomical objects such as the Moon, Venus, Jupiter, circumstellar envelopes of late-type stars, proto-planetary nebulae, and interstellar molecular clouds in the vicinity of star-forming regions, we conducted spectroscopic observations in the N-band region.

  9. Absorption lines of High Redshift GRB 130606A observed by Subaru FOCAS

    Science.gov (United States)

    Kurita, Shin; Kawai, Nobuyuki; Saito, Yoshihiko; Aoki, Kentaro; Kosugi, George; Hattori, Takashi; Totani, Tomonori

    We observed the optical afterglow of a Swift GRB 130606A using Subaru FOCAS. GRB 130606A has a redshift 5.91, the 5th highest redshift among the GRBs observed so far. The observation started 10.3 hours after the burst for 13.3 hours. We obtained the optical spectrum with a high S/N and detected ~40 absorption lines. Especially, absorption lines which have large equivalent widths shows their velocity. In some lines with high statistics, we study their velocity structures.

  10. The Subaru FMOS galaxy redshift survey (FastSound). IV. New constraint on gravity theory from redshift space distortions at z ˜ 1.4

    Science.gov (United States)

    Okumura, Teppei; Hikage, Chiaki; Totani, Tomonori; Tonegawa, Motonari; Okada, Hiroyuki; Glazebrook, Karl; Blake, Chris; Ferreira, Pedro G.; More, Surhud; Taruya, Atsushi; Tsujikawa, Shinji; Akiyama, Masayuki; Dalton, Gavin; Goto, Tomotsugu; Ishikawa, Takashi; Iwamuro, Fumihide; Matsubara, Takahiko; Nishimichi, Takahiro; Ohta, Kouji; Shimizu, Ikkoh; Takahashi, Ryuichi; Takato, Naruhisa; Tamura, Naoyuki; Yabe, Kiyoto; Yoshida, Naoki

    2016-06-01

    We measure the redshift-space correlation function from a spectroscopic sample of 2783 emission line galaxies from the FastSound survey. The survey, which uses the Subaru Telescope and covers a redshift range of 1.19 parallel and perpendicular to the line of sight and its quadrupole moment. RSD has been extensively used to test general relativity on cosmological scales at z < 1. Adopting a ΛCDM cosmology with the fixed expansion history and no velocity dispersion (σv = 0), and using the RSD measurements on scales above 8 h-1 Mpc, we obtain the first constraint on the growth rate at the redshift, f (z)σ8(z) = 0.482 ± 0.116 at z ˜ 1.4 after marginalizing over the galaxy bias parameter b(z)σ8(z). This corresponds to 4.2 σ detection of RSD. Our constraint is consistent with the prediction of general relativity fσ8 ˜ 0.392 within the 1 σ confidence level. When we allow σv to vary and marginalize over it, the growth rate constraint becomes fσ _8=0.494^{+0.126}_{-0.120}. We also demonstrate that by combining with the low-z constraints on fσ8, high-z galaxy surveys like the FastSound can be useful to distinguish modified gravity models without relying on CMB anisotropy experiments.

  11. Giant Magellan Telescope: overview

    Science.gov (United States)

    Johns, Matt; McCarthy, Patrick; Raybould, Keith; Bouchez, Antonin; Farahani, Arash; Filgueira, Jose; Jacoby, George; Shectman, Steve; Sheehan, Michael

    2012-09-01

    The Giant Magellan Telescope (GMT) is a 25-meter optical/infrared extremely large telescope that is being built by an international consortium of universities and research institutions. It will be located at the Las Campanas Observatory, Chile. The GMT primary mirror consists of seven 8.4-m borosilicate honeycomb mirror segments made at the Steward Observatory Mirror Lab (SOML). Six identical off-axis segments and one on-axis segment are arranged on a single nearly-paraboloidal parent surface having an overall focal ratio of f/0.7. The fabrication, testing and verification procedures required to produce the closely-matched off-axis mirror segments were developed during the production of the first mirror. Production of the second and third off-axis segments is underway. GMT incorporates a seven-segment Gregorian adaptive secondary to implement three modes of adaptive-optics operation: natural-guide star AO, laser-tomography AO, and ground-layer AO. A wide-field corrector/ADC is available for use in seeing-limited mode over a 20-arcmin diameter field of view. Up to seven instruments can be mounted simultaneously on the telescope in a large Gregorian Instrument Rotator. Conceptual design studies were completed for six AO and seeing-limited instruments, plus a multi-object fiber feed, and a roadmap for phased deployment of the GMT instrument suite is being developed. The partner institutions have made firm commitments for approximately 45% of the funds required to build the telescope. Project Office efforts are currently focused on advancing the telescope and enclosure design in preparation for subsystem- and system-level preliminary design reviews which are scheduled to be completed in the first half of 2013.

  12. Efficient injection from large telescopes into single-mode fibres: Enabling the era of ultra-precision astronomy

    Science.gov (United States)

    Jovanovic, N.; Schwab, C.; Guyon, O.; Lozi, J.; Cvetojevic, N.; Martinache, F.; Leon-Saval, S.; Norris, B.; Gross, S.; Doughty, D.; Currie, T.; Takato, N.

    2017-08-01

    Photonic technologies offer numerous advantages for astronomical instruments such as spectrographs and interferometers owing to their small footprints and diverse range of functionalities. Operating at the diffraction-limit, it is notoriously difficult to efficiently couple such devices directly with large telescopes. We demonstrate that with careful control of both the non-ideal pupil geometry of a telescope and residual wavefront errors, efficient coupling with single-mode devices can indeed be realised. A fibre injection was built within the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) instrument. Light was coupled into a single-mode fibre operating in the near-IR (J - H bands) which was downstream of the extreme adaptive optics system and the pupil apodising optics. A coupling efficiency of 86% of the theoretical maximum limit was achieved at 1550 nm for a diffraction-limited beam in the laboratory, and was linearly correlated with Strehl ratio. The coupling efficiency was constant to within mode fibre of 50%, consistent with expectations. The coupling was >40% for 84% of the time and >50% for 41% of the time. The laboratory results allow us to forecast that extreme adaptive optics levels of correction (Strehl ratio >90% in H-band) would allow coupling of >67% (of the order of coupling to multimode fibres currently) while standard levels of wavefront correction (Strehl ratio >20% in H-band) would allow coupling of >18%. For Strehl ratios choice but the signal-to-noise, and pixel availability must be considered. These results illustrate a clear path to efficient on-sky coupling into a single-mode fibre, which could be used to realise modal-noise-free radial velocity machines, very-long-baseline optical/near-IR interferometers and/or simply exploit photonic technologies in future instrument design.

  13. RHCV Telescope System Operations Manual

    Science.gov (United States)

    2018-01-05

    APPROVED FOR PUBLICATION IN ACCORDANCE WITH ASSIGNED DISTRIBUTION STATEMENT. //signed// //signed// JOHN D. IANNI ROBERT C. MCKINLEY...RESPONSIBLE PERSON (Monitor) a. REPORT Unclassified b. ABSTRACT Unclassified c. THIS PAGE Unclassified John D. Ianni 19b. TELEPHONE NUMBER...plug) 10. Turn off both wall power boxes; Leave PC logged in, a screen saver will start later 11. Lock catwalk door and return the key to its

  14. Space Telescope Systems Description Handbook

    Science.gov (United States)

    Carter, R. E.

    1985-01-01

    The objective of the Space Telescope Project is to orbit a high quality optical 2.4-meter telescope system by the Space Shuttle for use by the astronomical community in conjunction with NASA. The scientific objectives of the Space Telescope are to determine the constitution, physical characteristics, and dynamics of celestial bodies; the nature of processes which occur in the extreme physical conditions existing in stellar objects; the history and evolution of the universe; and whether the laws of nature are universal in the space-time continuum. Like ground-based telescopes, the Space Telescope was designed as a general-purpose instrument, capable of utilizing a wide variety of scientific instruments at its focal plane. This multi-purpose characteristic will allow the Space Telescope to be effectively used as a national facility, capable of supporting the astronomical needs for an international user community and hence making contributions to man's needs. By using the Space Shuttle to provide scientific instrument upgrading and subsystems maintenance, the useful and effective operational lifetime of the Space Telescope will be extended to a decade or more.

  15. Useful Science with 1m Class Telescopes (C)

    Science.gov (United States)

    Vazdekis, A.; Gorgas, J.; Cenarro, J.; Cardiel, N.; Peletier, R.; Prada, F.

    Osawa 2-21-1, Mitaka, Tokyo 181-8588, Japan It is reported the results of an observational run carried out with the JKT telescope of 1m at La Palma Observatory, which allowed to obtain the near-IR intermediate resolution spectroscopy of the spectral region at ~8500A, which include the CaII triplet, for an extensive sample of ~500 stars that cover a very wide range in temperatures, gravities and metallicities. The observations are aimed at building new stellar population synthesis model predictions which allow to analyze the CaII feature in external galaxies. It is studied the well known sensitivity of this feature to the initial mass function (IMF) as well as its behavior as a function of the age and metallicity for integrated spectra. Nowadays such a kind of telescopes are nearly forgotten, however, we see that this is an example of how these telescopes are still very useful, particularly, for performing a fundamental type work which is required for the interpretation of the key stellar population parameters in external galaxies. In fact the results of this observational run is mainly devoted to study the dwarf/giant ratios in field and cluster galaxies as well as globular clusters systems in external galaxies, which can be carried out at modern telescope installations such as SUBARU.

  16. Subaru/SCExAO First-light Direct Imaging of a Young Debris Disk around HD 36546

    Energy Technology Data Exchange (ETDEWEB)

    Currie, Thayne; Guyon, Olivier; Kudo, Tomoyuki; Jovanovic, Nemanja; Lozi, Julien [National Astronomical Observatory of Japan, Subaru Telescope, National Institutes of Natural Sciences, Hilo, HI 96720 (United States); Tamura, Motohide; Kuzuhara, Masayuki [Astrobiology Center, National Institutes of Natural Sciences, 2-21-1 Osawa, Mitaka, Tokyo (Japan); Schlieder, Joshua E. [IPAC-NExScI, Mail Code 100-22, Caltech, 1200 E. California Boulevard, Pasadena, CA 91125 (United States); Brandt, Timothy D. [Astrophysics Department, Institute for Advanced Study, Princeton, NJ (United States); Kuhn, Jonas [Institute for Astronomy, ETH-Zurich, Wolfgang-Pauli-Str. 27, 8093 Zurich (Switzerland); Serabyn, Eugene; Singh, Garima [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Drive, Pasadena, CA (United States); Janson, Markus [Department of Astronomy, Stockholm University, AlbaNova University Center, SE-106 91 Stockholm (Sweden); Carson, Joseph [Department of Physics and Astronomy, College of Charleston, 66 George Street, Charleston, SC (United States); Groff, Tyler; Kasdin, N. Jeremy [Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ (United States); McElwain, Michael W.; Grady, Carol [Exoplanets and Stellar Astrophysics Laboratory, Code 667, NASA-Goddard Space Flight Center, Greenbelt, MD (United States); Uyama, Taichi [Department of Astronomy, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo (Japan); Akiyama, Eiji [Chile Observatory, National Astronomical Observatory of Japan, Osawa, Mitaka, Tokyo (Japan); and others

    2017-02-10

    We present H -band scattered light imaging of a bright debris disk around the A0 star HD 36546 obtained from the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system with data recorded by the HiCIAO camera using the vector vortex coronagraph. SCExAO traces the disk from r ∼ 0.″3 to r ∼1″ (34–114 au). The disk is oriented in a near east–west direction (PA ∼ 75°), is inclined by i ∼ 70°–75°, and is strongly forward-scattering (g > 0.5). It is an extended disk rather than a sharp ring; a second, diffuse dust population extends from the disk’s eastern side. While HD 36546 intrinsic properties are consistent with a wide age range (t ∼ 1–250 Myr), its kinematics and analysis of coeval stars suggest a young age (3–10 Myr) and a possible connection to Taurus-Auriga’s star formation history. SCExAO’s planet-to-star contrast ratios are comparable to the first-light Gemini Planet Imager contrasts; for an age of 10 Myr, we rule out planets with masses comparable to HR 8799 b beyond a projected separation of 23 au. A massive icy planetesimal disk or an unseen super-Jovian planet at r > 20 au may explain the disk’s visibility. The HD 36546 debris disk may be the youngest debris disk yet imaged, is the first newly identified object from the now-operational SCExAO extreme AO system, is ideally suited for spectroscopic follow-up with SCExAO/CHARIS in 2017, and may be a key probe of icy planet formation and planet–disk interactions.

  17. Subaru/SCExAO First-light Direct Imaging of a Young Debris Disk around HD 36546

    Science.gov (United States)

    Currie, Thayne; Guyon, Olivier; Tamura, Motohide; Kudo, Tomoyuki; Jovanovic, Nemanja; Lozi, Julien; Schlieder, Joshua E.; Brandt, Timothy D.; Kuhn, Jonas; Serabyn, Eugene; Janson, Markus; Carson, Joseph; Groff, Tyler; Kasdin, N. Jeremy; McElwain, Michael W.; Singh, Garima; Uyama, Taichi; Kuzuhara, Masayuki; Akiyama, Eiji; Grady, Carol; Hayashi, Saeko; Knapp, Gillian; Kwon, Jung-mi; Oh, Daehyeon; Wisniewski, John; Sitko, Michael; Yang, Yi

    2017-02-01

    We present H-band scattered light imaging of a bright debris disk around the A0 star HD 36546 obtained from the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system with data recorded by the HiCIAO camera using the vector vortex coronagraph. SCExAO traces the disk from r ˜ 0.″3 to r ˜ 1″ (34-114 au). The disk is oriented in a near east-west direction (PA ˜ 75°), is inclined by I ˜ 70°-75°, and is strongly forward-scattering (g > 0.5). It is an extended disk rather than a sharp ring; a second, diffuse dust population extends from the disk’s eastern side. While HD 36546 intrinsic properties are consistent with a wide age range (t ˜ 1-250 Myr), its kinematics and analysis of coeval stars suggest a young age (3-10 Myr) and a possible connection to Taurus-Auriga’s star formation history. SCExAO’s planet-to-star contrast ratios are comparable to the first-light Gemini Planet Imager contrasts; for an age of 10 Myr, we rule out planets with masses comparable to HR 8799 b beyond a projected separation of 23 au. A massive icy planetesimal disk or an unseen super-Jovian planet at r > 20 au may explain the disk’s visibility. The HD 36546 debris disk may be the youngest debris disk yet imaged, is the first newly identified object from the now-operational SCExAO extreme AO system, is ideally suited for spectroscopic follow-up with SCExAO/CHARIS in 2017, and may be a key probe of icy planet formation and planet-disk interactions.

  18. Subaru SCExAO First-Light Direct Imaging of a Young Debris Disk around HD 36546

    Science.gov (United States)

    Currie, Thayne; Guyon, Olivier; Tamura, Motohide; Kudo, Tomoyuki; Jovanovic, Nemanja; Lozi, Julien; Schlieder, Joshua E.; Brandt, TImothy D.; Kuhn, Jonasa; Serabyn, Eugene; hide

    2017-01-01

    We present H-band scattered light imaging of a bright debris disk around the A0 star HD 36546 obtained from the Subaru Coronagraphic Extreme Adaptive Optics (SCExAO) system with data recorded by the HiCIAO camera using the vector vortex coronagraph. SCExAO traces the disk from r approximately 0 3 to r approximately 0".3 to r approximately 1" (34-114 au). The disk is oriented in a near east west direction (PA approximately 75deg), is inclined by I approximately 70deg-75deg, and is strongly forward-scattering(g greater than 0.5). It is an extended disk rather than a sharp ring; a second, diffuse dust population extends from the disks eastern side. While HD 36546 intrinsic properties are consistent with a wide age range (t approximately 1-250 Myr), its kinematics and analysis of coeval stars suggest a young age (310 Myr) and a possible connection to Taurus-Aurigas star formation history. SCExAOs planet-to-star contrast ratios are comparable to the first-light Gemini Planet Imager contrasts; for an age of 10 Myr, we rule out planets with masses comparable to HR 8799 b beyond a projected separation of 23 au. A massive icy planetesimal disk or an unseen super-Jovian planet at r greater than 20 au may explain the disks visibility. The HD 36546 debris disk may be the youngest debris disk yet imaged, is the first newly identified object from the now-operational SCExAO extreme AO system, is ideally suited for spectroscopic follow-up with SCExAO/CHARIS in 2017, and may be a key probe of icy planet formation and planet disk interactions.

  19. Photometric redshifts for Hyper Suprime-Cam Subaru Strategic Program Data Release 1

    Science.gov (United States)

    Tanaka, Masayuki; Coupon, Jean; Hsieh, Bau-Ching; Mineo, Sogo; Nishizawa, Atsushi J.; Speagle, Joshua; Furusawa, Hisanori; Miyazaki, Satoshi; Murayama, Hitoshi

    2018-01-01

    Photometric redshifts are a key component of many science objectives in the Hyper Suprime-Cam Subaru Strategic Program (HSC-SSP). In this paper, we describe and compare the codes used to compute photometric redshifts for HSC-SSP, how we calibrate them, and the typical accuracy we achieve with the HSC five-band photometry (grizy). We introduce a new point estimator based on an improved loss function and demonstrate that it works better than other commonly used estimators. We find that our photo-z's are most accurate at 0.2 ≲ zphot ≲ 1.5, where we can straddle the 4000 Å break. We achieve σ[Δzphot/(1 + zphot)] ˜ 0.05 and an outlier rate of about 15% for galaxies down to i = 25 within this redshift range. If we limit ourselves to a brighter sample of i https://hsc-release.mtk.nao.ac.jp/".

  20. SOAR Telescope Progress Report

    Science.gov (United States)

    Sebring, T.; Cecil, G.; Krabbendam, V.

    1999-12-01

    The 4.3m SOAR telescope is fully funded and under construction. A partnership between the country of Brazil, NOAO, Michigan State University, and the University of North Carolina at Chapel Hill, SOAR is being designed for high-quality imaging and imaging spectroscopy in the optical and near-IR over a field of view up to 12' diameter. US astronomers outside MSU and UNC will access 30% of the observing time through the standard NOAO TAC process. The telescope is being designed to support remote and synoptic observations. First light is scheduled for July 2002 at Cerro Pachon in Chile, a site with median seeing of 2/3" at 500 nm. The telescope will be operated by CTIO. Corning Inc. has fused the mirror blanks from boules of ULE glass. RSI in Richardson, Texas and Raytheon Optical Systems Inc. in Danbury, Conn. are designing and will fabricate the mount and active optics systems, respectively. The mount supports an instrument payload in excess of 5000 kg, at 2 Nasmyth locations and 3 bent Cass. ports. The mount and facility building have space for a laser to generate an artificial AO guide star. LabVIEW running under the Linux OS on compactPCI hardware has been adopted to control all telescope, detector, and instrument systems. The primary mirror is 10 cm thick and will be mounted on 120 electro-mechanical actuators to maintain its ideal optical figure at all elevations. The position of the light-weighted secondary mirror is adjusted to maintain collimation through use of a Shack-Hartmann wavefront sensor. The tertiary mirror feeds instruments and also jitters at up to 50 Hz to compensate for telescope shake and atmosphere wavefront tilt. The dome is a steel framework, with fiberglass panels. Air in the observing volume will be exchanged with that outside every few minutes by using large fans under computer control. All systems will be assembled and checked at the manufacturer's facility, then shipped to Chile. A short integration period is planned, and limited science

  1. The Planck Telescope reflectors

    Science.gov (United States)

    Stute, Thomas

    2004-09-01

    The mechanical division of EADS-Astrium GmbH, Friedrichshafen is currently engaged with the development, manufacturing and testing of the advanced dimensionally stable composite reflectors for the ESA satellite borne telescope Planck. The objective of the ESA mission Planck is to analyse the first light that filled the universe, the cosmic microwave background radiation. Under contract of the Danish Space Research Institute and ESA EADS-Astrium GmbH is developing the all CFRP primary and secondary reflectors for the 1.5-metre telescope which is the main instrument of the Planck satellite. The operational frequency ranges from to 25 GHz to 1000 GHz. The demanding high contour accuracy and surface roughness requirements are met. The design provides the extreme dimensional stability required by the cryogenic operational environment at around 40 K. The elliptical off-axis reflectors display a classical lightweight sandwich design with CFRP core and facesheets. Isostatic mounts provide the interfaces to the telescope structure. Protected VDA provides the reflecting surface. The manufacturing is performed at the Friedrichshafen premises of EADS-Space Transportation GmbH, the former Dornier composite workshops. Advanced manufacturing technologies like true angle lay-up by CNC fibre placement and filament winding are utilized. The protected coating is applied at the CAHA facilities at the Calar Alto Observatory, Spain. The exhaustive environmental testing is performed at the facilities of IABG, Munich (mechanical testing) and for the cryo-optical tests at CSL Liege. The project is in advanced state with both Qualification Models being under environmental testing. The flight models will be delivered in 2004. The paper gives an overview over the requirements and the main structural features how these requirements are met. Special production aspects and available test results are reported.

  2. Okayama optical polarimetry and spectroscopy system (OOPS) III. Distributed control system of the 91 cm telescope.

    Science.gov (United States)

    Yutani, M.; Shimizu, Y.; Kurakami, T.; Sasaki, T.

    Telescope control system of the 91 cm telescope at the Okayama Astrophysical Observatory was renewed to be composed of a sequencer, which controls devices of the telescope, and an operational computer. Message-based communication was introduced to perform an organized and scheduled observation with the telescope, an autoguider, and an observing instrument OOPS, whose control computers are distributed in the telescope control network.

  3. ANTARES : The first undersea neutrino telescope

    NARCIS (Netherlands)

    Ageron, M.; Aguilar, J. A.; Al Samarai, I.; Albert, A.; Ameli, F.; Andre, M.; Anghinolfi, M.; Anton, G.; Anvar, S.; Ardid, M.; Arnaud, K.; Aslanides, E.; Jesus, A. C. Assis; Astraatmadja, T.; Aubert, J. -J.; Auer, R.; Barbarito, E.; Baret, B.; Basa, S.; Bazzotti, M.; Becherini, Y.; Beltramelli, J.; Bersani, A.; Bertin, V.; Beurthey, S.; Biagi, S.; Bigongiari, C.; Billault, M.; Blaes, R.; Bogazzi, C.; de Botton, N.; Bou-Cabo, M.; Boudahef, B.; Bouwhuis, M. C.; Brown, A. M.; Brunner, J.; Busto, J.; Caillat, L.; Calzas, A.; Camarena, F.; Capone, A.; Caponetto, L.; Carloganu, C.; Carminati, G.; Carmona, E.; Carr, J.; Carton, P. H.; Cassano, B.; Castorina, E.; Cecchini, S.; Ceres, A.; Chaleil, Th; Charvis, Ph; Chauchot, P.; Chiarusi, T.; Circella, M.; Compere, C.; Coniglione, R.; Coppolani, X.; Cosquer, A.; Costantini, H.; Cottini, N.; Coyle, P.; Cuneo, S.; Curtil, C.; D'Amato, C.; Damy, G.; van Dantzig, R.; De Bonis, G.; Decock, G.; Decowski, M. P.; Dekeyser, I.; Delagnes, E.; Desages-Ardellier, F.; Deschamps, A.; Destelle, J. -J.; Di Maria, F.; Dinkespiler, B.; Distefano, C.; Dominique, J. -L.; Donzaud, C.; Dornic, D.; Dorosti, Q.; Drogou, J. -F.; Drouhin, D.; Druillole, F.; Durand, D.; Durand, R.; Eberl, T.; Emanuele, U.; Engelen, J. J.; Ernenwein, J. -P.; Escoffier, S.; Falchini, E.; Favard, S.; Fehr, F.; Feinstein, F.; Ferri, M.; Ferry, S.; Fiorello, C.; Flaminio, V.; Folger, F.; Fritsch, U.; Fuda, J. -L.; Galata, S.; Galeotti, S.; Gay, P.; Gensolen, F.; Giacomelli, G.; Gojak, C.; Gomez-Gonzalez, J. P.; Goret, Ph.; Graf, K.; Guillard, G.; Halladjian, G.; Hallewell, G.; van Haren, H.; Hartmann, B.; Heijboer, A. J.; Heine, E.; Hello, Y.; Henry, S.; Hernandez-Rey, J. J.; Herold, B.; Hoessl, J.; Hogenbirk, J.; Hsu, C. C.; Hubbard, J. R.; Jaquet, M.; Jaspers, M.; de Jong, M.; Jourde, D.; Kadler, M.; Kalantar-Nayestanaki, N.; Kalekin, O.; Kappes, A.; Karg, T.; Karkar, S.; Karolak, M.; Katz, U.; Keller, P.; Kestener, P.; Kok, E.; Kok, H.; Kooijman, P.; Kopper, C.; Kouchner, A.; Kretschmer, W.; Kruijer, A.; Kuch, S.; Kulikovskiy, V.; Lachartre, D.; Lafoux, H.; Lagier, P.; Lahmann, R.; Lahonde-Hamdoun, C.; Lamare, P.; Lambard, G.; Languillat, J-C; Larosa, G.; Lavalle, J.; Le Guen, Y.; Le Provost, H.; LeVanSuu, A.; Lefevre, D.; Legou, T.; Lelaizant, G.; Leveque, C.; Lim, G.; Lo Presti, D.; Loehner, H.; Loucatos, S.; Louis, F.; Lucarelli, F.; Lyashuk, V.; Magnier, P.; Mangano, S.; Marcel, A.; Marcelin, M.; Margiotta, A.; Martinez-Mora, J. A.; Masullo, R.; Mazeas, F.; Mazure, A.; Meli, A.; Melissas, M.; Migneco, E.; Mongelli, M.; Montaruli, T.; Morganti, M.; Moscoso, L.; Motz, H.; Musumeci, M.; Naumann, C.; Naumann-Godo, M.; Neff, M.; Niess, V.; Nooren, G. J. L.; Oberski, J. E. J.; Olivetto, C.; Palanque-Delabrouille, N.; Patioselitis, D.; Papaleo, R.; Pavalas, G. E.; Payet, K.; Payre, P.; Peek, H.; Petrovic, J.; Piattelli, P.; Picot-Clemente, N.; Picq, C.; Piret, Y.; Poinsignon, J.; Popa, V.; Pradier, T.; Presani, E.; Prono, G.; Racca, C.; Raia, G.; van Randwijk, J.; Real, D.; Reed, C.; Rethore, F.; Rewiersma, P.; Riccobene, G.; Richardt, C.; Richter, R.; Ricol, J. S.; Rigaud, V.; Roca, V.; Roensch, K.; Rolin, J. -F.; Rostovtsev, A.; Rottura, A.; Roux, J.; Rujoiu, M.; Ruppi, M.; Russo, G. V.; Salesa, F.; Salomon, K.; Sapienza, P.; Schmitt, F.; Schoeck, F.; Schuller, J. -P.; Schuessler, F.; Sciliberto, D.; Shanidze, R.; Shirokov, E.; Simeone, F.; Sottoriva, A.; Spies, A.; Spona, T.; Spurio, M.; Steijger, J. J. M.; Stolarczyk, Th; Streeb, K.; Sulak, L.; Taiuti, M.; Tamburini, C.; Tao, C.; Tasca, L.; Terreni, G.; Tezier, D.; Toscano, S.; Urbano, F.; Valdy, P.; Vallage, B.; Van Elewyck, V.; Vannoni, G.; Vecchi, M.; Venekamp, G.; Verlaat, B.; Vernin, P.; Virique, E.; de Vries, G.; Wijnker, G.; Wobbe, G.; de Wolf, E.; Yakovenko, Y.; Yepes, H.; Zaborov, D.; Zaccone, H.; Zornoza, J. D.; Zuniga, J.; van Wijk, R.

    2011-01-01

    The ANTARES Neutrino Telescope was completed in May 2008 and is the first operational Neutrino Telescope in the Mediterranean Sea. The main purpose of the detector is to perform neutrino astronomy and the apparatus also offers facilities for marine and Earth sciences. This paper describes the

  4. James Webb Space Telescope Optical Telescope Element Mirror Coatings

    Science.gov (United States)

    Keski-Kuha, Ritva A.; Bowers, Charles W.; Quijada, Manuel A.; Heaney, James B.; Gallagher, Benjamin; McKay, Andrew; Stevenson, Ian

    2012-01-01

    James Webb Space Telescope (JWST) Optical Telescope Element (OTE) mirror coating program has been completed. The science goals of the JWST mission require a uniform, low stress, durable optical coating with high reflectivity over the JWST spectral region. The coating has to be environmentally stable, radiation resistant and compatible with the cryogenic operating environment. The large size, 1.52 m point to point, light weight, beryllium primary mirror (PM) segments and flawless coating process during the flight mirror coating program that consisted coating of 21 flight mirrors were among many technical challenges. This paper provides an overview of the JWST telescope mirror coating program. The paper summarizes the coating development program and performance of the flight mirrors.

  5. Subaru XV: una estrategia de comunicación y mercadeo para la generación Y

    Directory of Open Access Journals (Sweden)

    Guillermo Armelini

    2013-03-01

    Full Text Available En el año 2009 las ventas en la industria automotriz disminuyeron. El año 2010 había comenzado mucho mejor. En este contexto, Subaru Chile, un actor del mercado con una cuota relativamente pequeña (anexo 1, decidió introducir un nuevo modelo: Subaru XV, un crossover que se presentaba como la gran apuesta para el creciente mercado de los SUV (anexos 6 y 7 El desafío de lanzar este modelo presentaba varias aristas. En primer lugar, el mercado de este tipo de vehículos ya estaba muy desarrollado por actores importantes como Toyota, Nissan y Renault (anexo 7. En segundo lugar, Subaru tenía que dirigir su acción comercial a un nuevo segmento de mercado (jóvenes entre 20 y 35 años que desconocía y, consecuentemente, debía estudiar sus hábitos y necesidades, y definir el sistema de comunicación más acorde para este target.

  6. Eyes on the sky a spectrum of telescopes

    CERN Document Server

    Graham-Smith, Francis

    2016-01-01

    Astronomy is experiencing a golden age, with a new generation of innovative telescopes yielding a flood of information on the Universe. This book traces the development of telescopes from Galileo to the present day, and explains the basic principles of telescopes that operate in different parts of electromagnetic spectrum.

  7. Double crystal monochromator controlled by integrated computing on BL07A in New SUBARU, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Okui, Masato, E-mail: okui@kohzu.co.jp [Kohzu Precision Co., Ltd., 2-6-15, Kurigi, Asao-ku, Kawasaki-shi, Kanagawa 215-8521 (Japan); Laboratory of Advanced Science and Technology for Industry, University of Hyogo (Japan); Yato, Naoki; Watanabe, Akinobu; Lin, Baiming; Murayama, Norio [Kohzu Precision Co., Ltd., 2-6-15, Kurigi, Asao-ku, Kawasaki-shi, Kanagawa 215-8521 (Japan); Fukushima, Sei, E-mail: FUKUSHIMA.Sei@nims.go.jp [Laboratory of Advanced Science and Technology for Industry, University of Hyogo (Japan); National Institute for Material Sciences (Japan); Kanda, Kazuhiro [Laboratory of Advanced Science and Technology for Industry, University of Hyogo (Japan)

    2016-07-27

    The BL07A beamline in New SUBARU, University of Hyogo, has been used for many studies of new materials. A new double crystal monochromator controlled by integrated computing was designed and installed in the beamline in 2014. In this report we will discuss the unique features of this new monochromator, MKZ-7NS. This monochromator was not designed exclusively for use in BL07A; on the contrary, it was designed to be installed at low cost in various beamlines to facilitate the industrial applications of medium-scale synchrotron radiation facilities. Thus, the design of the monochromator utilized common packages that can satisfy the wide variety of specifications required at different synchrotron radiation facilities. This monochromator can be easily optimized for any beamline due to the fact that a few control parameters can be suitably customized. The beam offset can be fixed precisely even if one of the two slave axes is omitted. This design reduces the convolution of mechanical errors. Moreover, the monochromator’s control mechanism is very compact, making it possible to reduce the size of the vacuum chamber can be made smaller.

  8. Subaru Weak Lensing Measurements of Four Strong Lensing Clusters: Are Lensing Clusters Over-Concentrated?

    Energy Technology Data Exchange (ETDEWEB)

    Oguri, Masamune; Hennawi, Joseph F.; Gladders, Michael D.; Dahle, Haakon; Natarajan, Priyamvada; Dalal, Neal; Koester, Benjamin P.; Sharon, Keren; Bayliss, Matthew

    2009-01-29

    We derive radial mass profiles of four strong lensing selected clusters which show prominent giant arcs (Abell 1703, SDSS J1446+3032, SDSS J1531+3414, and SDSS J2111-0115), by combining detailed strong lens modeling with weak lensing shear measured from deep Subaru Suprime-cam images. Weak lensing signals are detected at high significance for all four clusters, whose redshifts range from z = 0.28 to 0.64. We demonstrate that adding strong lensing information with known arc redshifts significantly improves constraints on the mass density profile, compared to those obtained from weak lensing alone. While the mass profiles are well fitted by the universal form predicted in N-body simulations of the {Lambda}-dominated cold dark matter model, all four clusters appear to be slightly more centrally concentrated (the concentration parameters c{sub vir} {approx} 8) than theoretical predictions, even after accounting for the bias toward higher concentrations inherent in lensing selected samples. Our results are consistent with previous studies which similarly detected a concentration excess, and increases the total number of clusters studied with the combined strong and weak lensing technique to ten. Combining our sample with previous work, we find that clusters with larger Einstein radii are more anomalously concentrated. We also present a detailed model of the lensing cluster Abell 1703 with constraints from multiple image families, and find the dark matter inner density profile to be cuspy with the slope consistent with -1, in agreement with expectations.

  9. Data mining of near-Earth asteroids in the Subaru Suprime-Cam archive

    Science.gov (United States)

    Vaduvescu, O.; Conovici, M.; Popescu, M.; Sonka, A.; Paraschiv, A.; Lacatus, D.; Tudorica, A.; Hudin, L.; Curelaru, L.; Inceu, V.; Zavoianu, D.; Cornea, R.; Toma, R.; Asher, D. J.; Hadnett, J.; Cheallaigh, L. Ó.

    2017-06-01

    As part of the EURONEAR project, almost 70,000 mosaic Suprime-Cam images taken between 1999 and 2013 were data mined for about 9,800 near Earth asteroids (NEAs) known by 2013 May. Using our PRECOVERY server and the "Find Subaru CCD" tool, we scrutinized 4,186 candidate CCD images possibly holding 518 NEAs. We found 113 NEAs as faint as V<25 magnitude, their positions being measured in 589 images using Astrometrica, then reported to the Minor Planet Center. Among them, 18 objects represent encounters of previously single opposition NEAs, their orbital arcs being extended by up to 10 years. In the second part of this work we searched for unknown NEAs in 78 sequences (780 CCD fields) of 4-5 mosaic images selected from the same Suprime-Cam archive and totaling 16.6 sq.deg, with the aim to assess the faint NEA distribution observable with an 8-m class survey. A total of 2,018 moving objects were measured, from which we identified 18 better NEA candidates. Using the R_c filter in good weather conditions, mostly dark time and sky directions slightly biased towards the ecliptic, at least one NEA could be discovered in every 1 sq.deg surveyed.

  10. System Architecture of Explorer Class Spaceborne Telescopes: A look at Optimization of Cost, Testability, Risk and Operational Duty Cycle from the Perspective of Primary Mirror Material Selection

    Science.gov (United States)

    Hull, Anthony B.; Westerhoff, Thomas

    2015-01-01

    Management of cost and risk have become the key enabling elements for compelling science to be done within Explorer or M-Class Missions. We trace how optimal primary mirror selection may be co-optimized with orbit selection. And then trace the cost and risk implications of selecting a low diffusivity low thermal expansion material for low and medium earth orbits, vs. high diffusivity high thermal expansion materials for the same orbits. We will discuss that ZERODUR®, a material that has been in space for over 30 years, is now available as highly lightweighted open-back mirrors, and the attributes of these mirrors in spaceborne optical telescope assemblies. Lightweight ZERODUR® solutions are practical from mirrors 4m in diameter. An example of a 1.2m lightweight ZERODUR® mirror will be discussed.

  11. A 16-m Telescope for the Advanced Technology Large Aperture Telescope (ATLAST) Mission

    Science.gov (United States)

    Lillie, Charles F.; Dailey, D. R.; Polidan, R. S.

    2010-01-01

    Future space observatories will require increasingly large telescopes to study the earliest stars and galaxies, as well as faint nearby objects. Technologies now under development will enable telescopes much larger than the 6.5-meter diameter James Webb Space Telescope (JWST) to be developed at comparable costs. Current segmented mirror and deployable optics technology enables the 6.5 meter JWST telescope to be folded for launch in the 5-meter diameter Ariane 5 payload fairing, and deployed autonomously after reaching orbit. Late in the next decade, when the Ares V Cargo Launch Vehicle payload fairing becomes operational, even larger telescope can be placed in orbit. In this paper we present our concept for a 16-meter JWST derivative, chord-fold telescope which could be stowed in the 10-m diameter Ares V fairing, plus a description of the new technologies that enable ATLAST to be developed at an affordable price.

  12. An Overview of the Green Bank Telescope

    Science.gov (United States)

    Srikanth, S.; Norrod, R.; King, L.; Parker, D.

    The Green Bank Telescope (GBT) at the National Radio Astronomy Observatory (NRAO) site in Green Bank, is to be the largest, fully-steerable telescope in the world. The GBT has a main reflector 100 mx100 m with unblocked aperture. The telescope will operate at prime focus in the 230 MHz-1200 MHz frequency range and at Gregorian focus in the 1.15 GHz to >100 GHz range. The performance of the GBT above 15 GHz will be enhanced by the use of an active surface and a metrology system. The location of the surface panels are to be measured and adjusted to minimize the surface error as measured from a best -fit paraboloid. Switching between prime focus and secondary focus operation, as well as selection of different receivers, will be achieved in a few minutes giving the telescope a rapid frequency agility.

  13. The NASA Spitzer Space Telescope.

    Science.gov (United States)

    Gehrz, R D; Roellig, T L; Werner, M W; Fazio, G G; Houck, J R; Low, F J; Rieke, G H; Soifer, B T; Levine, D A; Romana, E A

    2007-01-01

    The National Aeronautics and Space Administration's Spitzer Space Telescope (formerly the Space Infrared Telescope Facility) is the fourth and final facility in the Great Observatories Program, joining Hubble Space Telescope (1990), the Compton Gamma-Ray Observatory (1991-2000), and the Chandra X-Ray Observatory (1999). Spitzer, with a sensitivity that is almost three orders of magnitude greater than that of any previous ground-based and space-based infrared observatory, is expected to revolutionize our understanding of the creation of the universe, the formation and evolution of primitive galaxies, the origin of stars and planets, and the chemical evolution of the universe. This review presents a brief overview of the scientific objectives and history of infrared astronomy. We discuss Spitzer's expected role in infrared astronomy for the new millennium. We describe pertinent details of the design, construction, launch, in-orbit checkout, and operations of the observatory and summarize some science highlights from the first two and a half years of Spitzer operations. More information about Spitzer can be found at http://spitzer.caltech.edu/.

  14. The NASA Spitzer Space Telescope

    Science.gov (United States)

    Gehrz, R. D.; Roellig, T. L.; Werner, M. W.; Fazio, G. G.; Houck, J. R.; Low, F. J.; Rieke, G. H.; Soifer, B. T.; Levine, D. A.; Romana, E. A.

    2007-01-01

    The National Aeronautics and Space Administration's Spitzer Space Telescope (formerly the Space Infrared Telescope Facility) is the fourth and final facility in the Great Observatories Program, joining Hubble Space Telescope (1990), the Compton Gamma-Ray Observatory (1991-2000), and the Chandra X-Ray Observatory (1999). Spitzer, with a sensitivity that is almost three orders of magnitude greater than that of any previous ground-based and space-based infrared observatory, is expected to revolutionize our understanding of the creation of the universe, the formation and evolution of primitive galaxies, the origin of stars and planets, and the chemical evolution of the universe. This review presents a brief overview of the scientific objectives and history of infrared astronomy. We discuss Spitzer's expected role in infrared astronomy for the new millennium. We describe pertinent details of the design, construction, launch, in-orbit checkout, and operations of the observatory and summarize some science highlights from the first two and a half years of Spitzer operations. More information about Spitzer can be found at http://spitzer.caltech.edu/.

  15. Autonomous Dome for a Robotic Telescope

    Science.gov (United States)

    Kumar, A.; Sengupta, A.; Ganesh, S.

    2016-12-01

    The Physical Research Laboratory operates a 50 cm robotic observatory at Mount Abu (Rajsthan, India). This Automated Telescope for Variability Studies (ATVS) makes use of the Remote Telescope System 2 (RTS2) for autonomous operations. The observatory uses a 3.5 m dome from Sirius Observatories. We have developed electronics using Arduino electronic circuit boards with home grown logic and software to control the dome operations. We are in the process of completing the drivers to link our Arduino based dome controller with RTS2. This document is a short description of the various phases of the development and their integration to achieve the required objective.

  16. Athermal laser launch telescopes

    NARCIS (Netherlands)

    Kamphues, F.G.; Henselmans, R.; Rijnveld, N.; Lemmen, M.H.J.; Doelman, N.J.; Nijkerk, M.D.

    2011-01-01

    ESO has developed a concept for a compact laser guide star unit for use in future Adaptive Optics (AO) systems. A small powerful laser is combined with a telescope that launches the beam, creating a single modular unit that can be mounted directly on a large telescope. This approach solves several

  17. Focusing Telescopes in Nuclear Astrophysics

    CERN Document Server

    Ballmoos, Peter von

    2007-01-01

    This volume is the first of its kind on focusing gamma-ray telescopes. Forty-eight refereed papers provide a comprehensive overview of the scientific potential and technical challenges of this nascent tool for nuclear astrophysics. The book features articles dealing with pivotal technologies such as grazing incident mirrors, multilayer coatings, Laue- and Fresnel-lenses - and even an optic using the curvature of space-time. The volume also presents an overview of detectors matching the ambitious objectives of gamma ray optics, and facilities for operating such systems on the ground and in space. The extraordinary scientific potential of focusing gamma-ray telescopes for the study of the most powerful sources and the most violent events in the Universe is emphasized in a series of introductory articles. Practicing professionals, and students interested in experimental high-energy astrophysics, will find this book a useful reference

  18. THE SUBARU HIGH-z QUASAR SURVEY: DISCOVERY OF FAINT z ∼ 6 QUASARS

    Energy Technology Data Exchange (ETDEWEB)

    Kashikawa, Nobunari; Furusawa, Hisanori; Niino, Yuu [Optical and Infrared Astronomy Division, National Astronomical Observatory, Mitaka, Tokyo 181-8588 (Japan); Ishizaki, Yoshifumi; Onoue, Masafusa; Toshikawa, Jun; Ishikawa, Shogo [Department of Astronomy, School of Science, Graduate University for Advanced Studies, Mitaka, Tokyo 181-8588 (Japan); Willott, Chris J. [Herzberg Institute of Astrophysics, National Research Council, 5071 West Saanich Road, Victoria, BC V9E 2E7 (Canada); Im, Myungshin [Center for the Exploration of the Origin of the Universe (CEOU), Astronomy Program, Department of Physics and Astronomy, Seoul National University, 1 Gwanak-rho, Gwanak-gu, Seoul 151-742 (Korea, Republic of); Shimasaku, Kazuhiro [Department of Astronomy, University of Tokyo, Hongo, Tokyo 113-0033 (Japan); Ouchi, Masami [Institute for Cosmic Ray Research, The University of Tokyo, 5-1-5 Kashiwanoha, Kashiwa, Chiba 277-8582 (Japan); Hibon, Pascale, E-mail: n.kashikawa@nao.ac.jp [Gemini Observatory, La Serena (Chile)

    2015-01-01

    We present the discovery of one or two extremely faint z ∼ 6 quasars in 6.5 deg{sup 2} utilizing a unique capability of the wide-field imaging of the Subaru/Suprime-Cam. The quasar selection was made in (i'-z{sub B} ) and (z{sub B} -z{sub R} ) colors, where z{sub B} and z{sub R} are bandpasses with central wavelengths of 8842 Å and 9841 Å, respectively. The color selection can effectively isolate quasars at z ∼ 6 from M/L/T dwarfs without the J-band photometry down to z{sub R} < 24.0, which is 3.5 mag deeper than the Sloan Digital Sky Survey (SDSS). We have selected 17 promising quasar candidates. The follow-up spectroscopy for seven targets identified one apparent quasar at z = 6.156 with M {sub 1450} = –23.10. We also identified one possible quasar at z = 6.041 with a faint continuum of M {sub 1450} = –22.58 and a narrow Lyα emission with HWHM =427 km s{sup –1}, which cannot be distinguished from Lyman α emitters. We derive the quasar luminosity function at z ∼ 6 by combining our faint quasar sample with the bright quasar samples by SDSS and CFHQS. Including our data points invokes a higher number density in the faintest bin of the quasar luminosity function than the previous estimate employed. This suggests a steeper faint-end slope than lower z, though it is yet uncertain based on a small number of spectroscopically identified faint quasars, and several quasar candidates still remain to be diagnosed. The steepening of the quasar luminosity function at the faint end does increase the expected emission rate of the ionizing photon; however, it only changes by a factor of approximately two to six. This was found to still be insufficient for the required photon budget of reionization at z ∼ 6.

  19. LoCuSS: Subaru Weak Lensing Study of 30 Galaxy Clusters

    Science.gov (United States)

    Okabe, Nobuhiro; Takada, Masahiro; Umetsu, Keiichi; Futamase, Toshifumi; Smith, Graham P.

    2010-06-01

    We use high-quality Subaru/Suprime-Cam imaging data to conduct a detailed weak lensing study of the distribution of dark matter in a sample of 30 X-ray luminous galaxy clusters at 0.15 ≤ z ≤ 0.3. A weak lensing signal is detected at high statistical significance in each cluster, the total signal-to-noise ratio of the detections ranging from 5 to 13. Comparing spherical models to the tangential distortion profiles of the clusters individually, we are unable to discriminate statistically between a singular isothermal sphere (SIS) and Navarro, Frenk, and White (NFW) models. However, when the tangential distortion profiles are combined and then models are fitted to the stacked profile, the SIS model is rejected at 6σ and 11σ, respectively, for low (Mvir 6 × 1014h-1Modot) mass bins. We also used individual cluster NFW model fits to investigate the relationship between the cluster mass and the concentration, finding that the concentration (cvir) decreases with increasing cluster mass (Mvir). The best-fit cvir-Mvir relation is: cvir(Mvir) = 8.75+4.13-2.89 × (Mvir/1014h-1Modot)-α with α≍0.40±0.19: i.e., a non-zero slope is detected at 2σ significance. This relation gives a concentration of cvir = 3.48+1.65-1.15 for clusters with Mvir = 1015h-1Modot, which is inconsistent at 4σ significance with the values of cvir ˜ 10 reported for strong-lensing-selected clusters. We have found that the measurement error on the cluster mass is smaller at higher over-densities, Δ ≃ 500-2000, than at the virial over-density, Δvir ≃ 110; typical fractional errors at Δ ≃ 500-2000 are improved to σ(MΔ)/MΔ ≃ 0.1-0.2 compared with 0.2-0.3 at Δvir. Furthermore, comparing the 3D spherical mass with the 2D cylinder mass, obtained from the aperture mass method at a given aperture radius, θΔ, reveals M2D(<θΔ)/M3D (

  20. Japanese radio telescopes

    Science.gov (United States)

    Kawaguchi, Noriyuki

    Japanese principal radio telescopes available for Very Long Baseline Interferometry (VLBI) observations are overviewed, and their characteristics and performances are summarized. Three fixed stations, Usuda, Nobeyama, and Kashima, and one 5-m mobile station use a hydrogen master-frequency standard, while other stations use an ultrastable X'tal oscillator locked to a cesium frequency standard. The 64-m telescope in Usuda developed for tracking satellites of deep-space missions is outlined, as well as the Kashima 34-m telescope covering a frequency range from 300 MHz to 49 GHz with 11 receivers. Attention is given to the Nobeyama 45-m telescope as a major telescope in Japan working in an international mm-VLBI network.

  1. Observing the Sun with Coronado telescopes telescopes

    CERN Document Server

    Pugh, Philip

    2007-01-01

    The Sun provides amateur astronomers with one of the few opportunities for daytime astronomy. In order to see the major features of our nearest star, special telescopes that have a very narrow visible bandwidth are essential. The bandwidth has to be as narrow as 1 A- 10-10 m (1 Angstrom) and centred on the absorption line of neutral hydrogen. This makes many major features of the Suna (TM)s chromosphere visible to the observer. Such narrow-band "Fabry-Perot etalon filters" are high technology, and until the introduction of the Coronado range of solar telescopes, were too expensive for amateur use. The entry-level Coronado telescope, the PST (Personal Solar Telescope) costs under 500. Solar prominences (vast columns of plasma, best seen at the edge of the solar disk), filaments, flares, sunspots, plage and active regions are all visible and can be imaged to produce spectacular solar photographs. Philip Pugh has assembled a team of contributors who show just how much solar work can be done with Coronado telesco...

  2. Gemini telescope structure design

    Science.gov (United States)

    Raybould, Keith; Gillett, Paul E.; Hatton, Peter; Pentland, Gordon; Sheehan, Mike; Warner, Mark

    1994-06-01

    The Gemini project is an international collaboration to design, fabricate, and assemble two 8 M telescopes, one on Mauna Kea in Hawaii, the other on Cerro Pachon in Chile. The telescopes will be national facilities designed to meet the Gemini Science Requirements (GSR), a document developed by the Gemini Science Committee (GSC) and the national project scientists. The Gemini telescope group, based on Tucson, has developed a telescope structure to meet the GSR. This paper describes the science requirements that have technically driven the design, and the features that have been incorporated to meet these requirements. This is followed by a brief description of the telescope design. Finally, analyses that have been performed and development programs that have been undertaken are described briefly. Only the designs that have been performed by the Gemini Telescope Structure, Building and Enclosure Group are presented here; control, optical systems, acquisition and guiding, active and adaptive optics, Cassegrain rotator and instrumentation issues are designed and managed by others and will not be discussed here, except for a brief description of the telescope configurations to aid subsequent discussions.

  3. Telescopic vision contact lens

    Science.gov (United States)

    Tremblay, Eric J.; Beer, R. Dirk; Arianpour, Ashkan; Ford, Joseph E.

    2011-03-01

    We present the concept, optical design, and first proof of principle experimental results for a telescopic contact lens intended to become a visual aid for age-related macular degeneration (AMD), providing magnification to the user without surgery or external head-mounted optics. Our contact lens optical system can provide a combination of telescopic and non-magnified vision through two independent optical paths through the contact lens. The magnified optical path incorporates a telescopic arrangement of positive and negative annular concentric reflectors to achieve 2.8x - 3x magnification on the eye, while light passing through a central clear aperture provides unmagnified vision.

  4. Hubble Space Telescope

    Science.gov (United States)

    1990-01-01

    An overview of the mission of the Hubble Space Telescope, a joint project between NASA and the European Space Agency which will be used to study deep space, as well as our solar system is presented. The video contains animations depicting the Hubble Space Telescope in orbit, as well as footage of scientists at the Space Telescope Science Institute making real time observations. The images Hubble acquires will be downloaded into a database that contains images of over 19,000,000 celestial objects called the Star Catalog.

  5. Ritchey-Chretien Telescope

    Science.gov (United States)

    Rosin, S.; Amon, M. (Inventor)

    1973-01-01

    A Ritchey-Chretien telescope is described which was designed to respond to images located off the optical axis by using two transparent flat plates positioned in the ray path of the image. The flat plates have a tilt angle relative to the ray path to compensate for astigmatism introduced by the telescope. The tilt angle of the plates is directly proportional to the off axis angle of the image. The plates have opposite inclination angles relative to the ray paths. A detector which is responsive to the optical image as transmitted through the plates is positioned approximately on the sagittal focus of the telescope.

  6. The Next Generation Space Telescope

    Science.gov (United States)

    Bely, Pierre-Yves (Editor); Burrows,, Christopher J. (Editor); Illingworth,, Garth D.

    1989-01-01

    In Space Science in the Twenty-First Century, the Space Science Board of the National Research Council identified high-resolution-interferometry and high-throughput instruments as the imperative new initiatives for NASA in astronomy for the two decades spanning 1995 to 2015. In the optical range, the study recommended an 8 to 16-meter space telescope, destined to be the successor of the Hubble Space Telescope (HST), and to complement the ground-based 8 to 10-meter-class telescopes presently under construction. It might seem too early to start planning for a successor to HST. In fact, we are late. The lead time for such major missions is typically 25 years, and HST has been in the making even longer with its inception dating back to the early 1960s. The maturity of space technology and a more substantial technological base may lead to a shorter time scale for the development of the Next Generation Space Telescope (NGST). Optimistically, one could therefore anticipate that NGST be flown as early as 2010. On the other hand, the planned lifetime of HST is 15 years. So, even under the best circumstances, there will be a five year gap between the end of HST and the start of NGST. The purpose of this first workshop dedicated to NGST was to survey its scientific potential and technical challenges. The three-day meeting brought together 130 astronomers and engineers from government, industry and universities. Participants explored the technologies needed for building and operating the observatory, reviewed the current status and future prospects for astronomical instrumentation, and discussed the launch and space support capabilities likely to be available in the next decade. To focus discussion, the invited speakers were asked to base their presentations on two nominal concepts, a 10-meter telescope in space in high earth orbit, and a 16-meter telescope on the moon. The workshop closed with a panel discussion focused mainly on the scientific case, siting, and the

  7. Goddard Robotic Telescope (GRT)

    Data.gov (United States)

    National Aeronautics and Space Administration — Since it is not possible to predict when a Gamma-Ray Burst (GRB) occurs, the follow-up ground telescopes must be distributed as uniform as possible all over the...

  8. LISA Telescope Sensitivity Analysis

    Science.gov (United States)

    Waluschka, Eugene; Krebs, Carolyn (Technical Monitor)

    2002-01-01

    The Laser Interferometer Space Antenna (LISA) for the detection of Gravitational Waves is a very long baseline interferometer which will measure the changes in the distance of a five million kilometer arm to picometer accuracies. As with any optical system, even one with such very large separations between the transmitting and receiving, telescopes, a sensitivity analysis should be performed to see how, in this case, the far field phase varies when the telescope parameters change as a result of small temperature changes.

  9. Eclipse telescope design factors

    Science.gov (United States)

    Hull, Tony; Trauger, John T.; Macenka, Steven A.; Moody, Dwight; Olarte, Guillermo; Sepulveda, Cesar; Tsuha, Walter; Cohen, David

    2003-02-01

    Very high contrast imagery, required for exoplanet image acquisition, imposes significantly different criteria upon telescope architecture than do the requirements imposed upon most spaceborne telescopes. For the Eclipse Mission, the fundamental figure-of-merit is a stellar contrast, or brightness reduction ratio, reaching a factor of 10-9 or better at star-planet distances as close as the 4th Airy ring. Factors necessary to achieve such contrast ratios are both irrelevant and largely ignored in contemporary telescope design. Although contemporary telescoeps now meet Hubble Space Telescope performance at substantially lower mass and cost than HST, control of mid-spatial-frequency (MSF) errors, crucial to coronagraphy, has not been emphasized. Accordingly, roughness at MSF has advanced little since HST. Fortunately, HST primary mirror smoothness would nearly satisfy Eclipse requirements, although other aspects of HST are undesirable for stellar coronagraphy. Conversely, the narrow field required for Eclipse eases other drivers of traditional telescope design. A systematic approach to telescope definition, with primary and sub-tier figures-of-merit, will be discussed in the context of the Eclipse Mission.

  10. Segmented Mirror Telescope Laboratory Ribbon-cutting Ceremony

    OpenAIRE

    2010-01-01

    Approved for public release; distribution is unlimited. The Segmented Mirror Space Telescope (SMT) was developed by the National Reconnaissance Office (NRO) as a test bed for future imaging telescope technologies. The NRO, which designs, builds and operates the nation's reconnaissance satellites has completed development and testing of the telescope and has decided to transfer the test bed to the Naval Postgraduate School (NPS) to support academic research. NPS Has created a new lab fac...

  11. The SPIRIT Telescope Initiative: six years on

    Science.gov (United States)

    Luckas, Paul

    2017-06-01

    Now in its sixth year of operation, the SPIRIT initiative remains unique in Australia, as a robust web-enabled robotic telescope initiative funded for education and outreach. With multiple modes of operation catering for a variety of usage scenarios and a fully supported education program, SPIRIT provides free access to contemporary astronomical tools for students and educators in Western Australia and beyond. The technical solution itself provides an excellent model for low cost robotic telescope installations, and the education program has evolved over time to include a broad range of student experiences-from engagement activities to authentic science. This paper details the robotic telescope solution, student interface and educational philosophy, summarises achievements and lessons learned and examines the possibilities for future enhancement including spectroscopy.

  12. Hubble Space Telescope: The Telescope, the Observations & the Servicing Mission

    Science.gov (United States)

    1999-11-01

    Today the HST Archives contain more than 260 000 astronomical observations. More than 13 000 astronomical objects have been observed by hundreds of different groups of scientists. Direct proof of the scientific significance of this project is the record-breaking number of papers published : over 2400 to date. Some of HST's most memorable achievements are: * the discovery of myriads of very faint galaxies in the early Universe, * unprecedented, accurate measurements of distances to the farthest galaxies, * significant improvement in the determination of the Hubble constant and thus the age of the Universe, * confirmation of the existence of blacks holes, * a far better understanding of the birth, life and death of stars, * a very detailed look at the secrets of the process by which planets are created. Europe and HST ESA's contribution to HST represents a nominal investment of 15%. ESA provided one of the two imaging instruments - the Faint Object Camera (FOC) - and the solar panels. It also has 15 scientists and computer staff working at the Space Telescope Science Institute in Baltimore (Maryland). In Europe the astronomical community receives observational assistance from the Space Telescope European Coordinating Facility (ST-ECF) located in Garching, Munich. In return for ESA's investment, European astronomers have access to approximately 15% of the observing time. In reality the actual observing time competitively allocated to European astronomers is closer to 20%. Looking back at almost ten years of operation, the head of ST-ECF, European HST Project Scientist Piero Benvenuti states: "Hubble has been of paramount importance to European astronomy, much more than the mere 20% of observing time. It has given the opportunity for European scientists to use a top class instrument that Europe alone would not be able to build and operate. In specific areas of research they have now, mainly due to HST, achieved international leadership." One of the major reasons for

  13. The Travelling Telescope

    Science.gov (United States)

    Murabona Oduori, Susan

    2015-08-01

    The telescope has been around for more than 400 years, and through good use of it scientists have made many astonishing discoveries and begun to understand our place in the universe. Most people, however, have never looked through one. Yet it is a great tool for cool science and observation especially in a continent and country with beautifully dark skies. The Travelling Telescope project aims to invite people outside under the stars to learn about those curious lights in the sky.The Travelling Telescope aims to promote science learning to a wide range of Kenyan schools in various locations exchanging knowledge about the sky through direct observations of celestial bodies using state of the art telescopes. In addition to direct observing we also teach science using various hands-on activities and astronomy software, ideal for explaining concepts which are hard to understand, and for a better grasp of the sights visible through the telescope. We are dedicated to promoting science using astronomy especially in schools, targeting children from as young as 3 years to the youth, teachers, their parents and members of the public. Our presentation focuses on the OAD funded project in rural coastal Kenya.

  14. Radio Telescope Reflectors

    Science.gov (United States)

    Baars, Jacob W. M.; Kärcher, Hans J.

    2017-11-01

    This book demonstrates how progress in radio astronomy is intimately linked to the development of reflector antennas of increasing size and precision. The authors describe the design and construction of major radio telescopes as those in Dwingeloo, Jodrell Bank, Parkes, Effelsberg and Green Bank since 1950 up to the present as well as millimeter wavelength telescopes as the 30m MRT of IRAM in Spain, the 50m LMT in Mexico and the ALMA submillimeter instrument. The advances in methods of structural design and coping with environmental influences (wind, temperature, gravity) as well as application of new materials are explained in a non-mathematical, descriptive and graphical way along with the story of the telescopes. Emphasis is placed on the interplay between astronomical and electromagnetic requirements and structural, mechanical and control solutions. A chapter on management aspects of large telescope projects closes the book. The authors address a readership with interest in the progress of engineering solutions applied to the development of radio telescope reflectors and ground station antennas for satellite communication and space research. The book will also be of interest to historians of science and engineering with an inclination to astronomy.

  15. Long term performance evaluation of the TACTIC imaging telescope ...

    Indian Academy of Sciences (India)

    The TeV atmospheric Cherenkov telescope with imaging camera (TACTIC) -ray telescope has been in operation at Mt. Abu, India since 2001 to study TeV -ray emission from celestial sources. During the last 10 years, apart from consistently detecting a steady signal from the Crab Nebula above ∼1.2 TeV energy, at a ...

  16. Telescopes and Techniques

    CERN Document Server

    Kitchin, C R

    2013-01-01

    Telescopes and Techniques has proved itself in its first two editions, having become probably one of the most widely used astronomy texts, both for amateur astronomers and astronomy and astrophysics undergraduates. Both earlier editions of the book were widely used for introductory practical astronomy courses in many universities. In this Third Edition the author guides the reader through the mathematics, physics and practical techniques needed to use today's telescopes (from the smaller models to the larger instruments installed in many colleges) and how to find objects in the sky. Most of the physics and engineering involved is described fully and requires little prior knowledge or experience. Both visual and electronic imaging techniques are covered, together with an introduction to how data (measurements) should be processed and analyzed. A simple introduction to radio telescopes is also included. Brief coverage of the more advanced topics of photometry and spectroscopy are included, but mainly to enable ...

  17. Corot telescope (COROTEL)

    Science.gov (United States)

    Viard, Thierry; Mathieu, Jean-Claude; Fer, Yann; Bouzou, Nathalie; Spalinger, Etienne; Chataigner, Bruno; Bodin, Pierre; Magnan, Alain; Baglin, Annie

    2017-11-01

    COROTEL is the telescope of the COROT Satellite which aims at measuring stellar flux variations very accurately. To perform this mission, COROTEL has to be very well protected against straylight (from Sun and Earth) and must be very stable with time. Thanks to its high experience in this field, Alcatel Alenia Space has proposed, manufactured and tested an original telescope concept associated with a high baffling performance. Since its delivery to LAM (Laboratoire d'Astrophysique de Marseille, CNRS) the telescope has passed successfully the qualification tests at instrument level performed by CNES. Now, the instrument is mounted on a Proteus platform and should be launched end of 2006. The satellite should bring to scientific community for the first time precious data coming from stars and their possible companions.

  18. Configurable Aperture Space Telescope

    Science.gov (United States)

    Ennico, Kimberly; Vassigh, Kenny; Bendek, Selman; Young, Zion W; Lynch, Dana H.

    2015-01-01

    In December 2014, we were awarded Center Innovation Fund to evaluate an optical and mechanical concept for a novel implementation of a segmented telescope based on modular, interconnected small sats (satlets). The concept is called CAST, a Configurable Aperture Space Telescope. With a current TRL is 2 we will aim to reach TLR 3 in Sept 2015 by demonstrating a 2x2 mirror system to validate our optical model and error budget, provide strawman mechanical architecture and structural damping analyses, and derive future satlet-based observatory performance requirements. CAST provides an alternative access to visible andor UV wavelength space telescope with 1-meter or larger aperture for NASA SMD Astrophysics and Planetary Science community after the retirement of HST.

  19. Enclosure design for Thirty Meter Telescope

    Science.gov (United States)

    Loewen, N.; Breckenridge, C.; Vasiljevic, A.

    2008-07-01

    The design of the calotte enclosure for the Thirty-Meter Telescope is currently in the preliminary design phase. Key aspects of the design include an efficient structural/mechanical form, repetition of components, modular construction, and operational efficiency. This paper includes an overall description of the enclosure design, as well as a description of the major structural and mechanical subsystems. The enclosure incorporates features that influence the thermal and aerodynamic environment of the telescope including ventilation openings and wind deflecting features. Other key considerations of the preliminary design include the constructability and maintainability of a dynamic structure of this scale at a remote mountain site.

  20. Exploring Galileo's Telescope

    Science.gov (United States)

    Straulino, Samuele; Terzuoli, Alessandra

    2010-01-01

    In the first months of 2009, the International Year of Astronomy, the authors developed an educational project for middle-level students connected with the first astronomical discoveries that Galileo Galilei (1564-1642) made 400 years ago. The project included the construction of a basic telescope and the observation of the Moon. The project, if…

  1. HabEx space telescope optical system

    Science.gov (United States)

    Martin, Stefan; Rud, Mayer; Scowen, Paul; Stern, Daniel; Nissen, Joel; Krist, John

    2017-09-01

    The HabEx study is defining a concept for a new space telescope with the primary mission of detecting and characterizing planetary systems around nearby stars. The telescope is designed specifically to operate with both a high contrast coronagraph and a starshade, enabling the direct optical detection of exoplanets as close as 70 mas from their star. The telescope will be equipped with cameras for exoplanetary system imaging and with spectrometers capable of characterizing exoplanet atmospheres. Gases such as oxygen, carbon dioxide, water vapor and methane have spectral lines in the visible and near infrared part of the spectrum and may indicate biological activity. In addition to the study of exoplanets, HabEx enables general astrophysics with two dedicated instruments. One instrument is a camera enabling imaging on a 3 arc minute field of view in two bands stretching from the UV to the near infrared. The same instrument can also be operated as a multi-object spectrograph, with resolution of 2000. A second instrument will be a high resolution UV spectrograph operating from 120 nm with up to 60,0000 resolution. We discuss the preliminary designs of the telescope and the optical instruments for the observatory.

  2. New Concept of Hungarian Robotic Telescopes

    Science.gov (United States)

    Hegedus, T.; Kiss, Z.; Biro, B.; Jager, Z.

    As the result of a longer innovation of a few Hungarian opto-mechanical and electronic small companies, a concept of fully robotic mounts has been formed some years ago. There are lots of Hungarian Automated Telescopes over the world (in Arizona, South Korea, Izrael and atop Mauna Kea, just below the famous Keck domes). These are cited as HAT telescopes (Bakos et al. 2002), and served thousands of large-frame time-series CCD images since 2004, and the working team found already 6 exoplanets, and a number of new variable stars, etc... The newest idea was to build a more robust robotic mount, hosting larger optics (D > 50 cm) for achieving much fainter celestial objects, than the HAT series (they are operating with Nikon teleobjective lenses) on a still relatively wide celestial area. The very first sample model is the BART-1, a 50cm f/6 telescope.

  3. Measurement System for the Green Bank Telescope

    Science.gov (United States)

    Parker, D. H.; Srikanth, S.

    The Green Bank Telescope (GBT) at the National Radio Astronomy Observatory (NRAO) site in Green Bank, WV, was completed in June 2000. At the time of writing, the GBT is undergoing testing of the various systems and characterization of the actual structural modes. It is the largest, fully-steerable radio telescope in the world. The main reflector which is a solid-surface paraboloid has an unblocked 100-meter projected aperture. The telescope will operate at prime focus from 25 MHz to 1200 MHz and at Gregorian focus from 1.15 GHz to ≥ 100 GHz. It is a state-of-the-art instrument with an active surface to compensate for deformations of the primary reflector backup structure due to external loads. The GBT has a unique six-degree of freedom subreflector and a three-degree of freedom prime focus mount that allow realigning of the optics which is required as the telescope moves in elevation. A receiver turret that holds 8 secondary focus receivers will provide rapid frequency agility for the telescope. This paper describes the metrology system, based on laser rangefinders, that has been developed at NRAO for the realization of the active surface and precision pointing of the GBT.

  4. ANTARES: An Undersea Neutrino telescope

    CERN Multimedia

    2002-01-01

    The ANTARES (Astronomy with a Neutrino Telescope and ${Abyss}$ environmental RESearch) deep-sea neutrino telescope is designed to search for neutrinos of astrophysical origin. Neutrinos are unique probes of the high energy universe; being neutral they are not deflected by magnetic fields and interacting weakly they can readily escape from the densest regions of the universe. Potential sources of neutrino are galactic (e.g supernova remnants, micro-quasars) and extra-galactic (e.g active galactic nuclei, gamma-ray bursters). Annihilation of dark matter particles in the Sun or Galactic Centre is another well motivated potential source of extra terrestrial neutrinos. The ANTARES detector is located 40 km off the coast of Toulon (France) at a depth of 2475m in the Mediterranean Sea. Being located in the Northern hemisphere it studies the Southern sky and in particular has the Galactic Centre in its field of view. Since 2006, the detector has operated continuously in a partial configuration. The detector was compl...

  5. Optical Space Telescope Assembly Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Optical Space Telescope Assembly (OSTA) task is to demonstrate the technology readiness of assembling large space telescopes on orbit in 2015. This task is an...

  6. Hubble Space Telescope: Should NASA Proceed with a Servicing Mission?

    National Research Council Canada - National Science Library

    Morgan, Daniel

    2006-01-01

    The National Aeronautics and Space Administration (NASA) estimates that without a servicing mission to replace key components, the Hubble Space Telescope will cease scientific operations in 2008 instead of 2010...

  7. Uzaybimer Radio Telescope Control System

    Science.gov (United States)

    Balbay, R.; Öz, G. K.; Arslan, Ö.; Özeren, F. F.; Küçük, İ.

    2016-12-01

    A 13 meters former NATO radar is being converted into a radio telescope. The radio telescope is controlled by a system which has been developed at UZAYBİMER. The Telescope Control System(TCS) has been designed using modern industrial systems. TCS has been developed in LabView platform in which works Windows embedded OS. The position feedback used on radio telescopes is an industrial EtherCAT standard. ASCOM library is used for astronomical calculations.

  8. Modelling and Simulation of Mobile Hydraulic Crane with Telescopic Arm

    DEFF Research Database (Denmark)

    Nielsen, Brian; Pedersen, Henrik Clemmensen; Andersen, Torben Ole

    2005-01-01

    paper a model of a loader crane with a flexible telescopic arm is presented, which may be used for evaluating control strategies. The telescopic arm is operated by four actuators connected hydraulically by a parallel circuit. The operating sequences of the individual actuators is therefore...... not controllable, but depends on the flow from the common control valve, flow resistances between the actuators and friction. The presented model incorporates structural flexibility of the telescopic arm and is capable of describing the dynamic behaviour of both the hydraulic and the mechanical system, including...

  9. Galileo's wondrous telescope

    Science.gov (United States)

    Cartlidge, Edwin

    2008-06-01

    If you need reminding of just how wrong the great and the good can be, take a trip to the Museum of the History of Science in Florence, Italy. The museum is staging an exhibition entitled "Galileo's telescope - the instrument that changed the world" to mark the 400th anniversary this year of Galileo Galilei's revolutionary astronomical discoveries, which were made possible by the invention of the telescope. At the start of the 17th century, astronomers assumed that all the planets and the stars in the heavens had been identified and that there was nothing new for them to discover, as the exhibition's curator, Giorgio Strano, points out. "No-one could have imagined what wondrous new things were about to be revealed by an instrument created by inserting two eyeglass lenses into the ends of a tube," he adds.

  10. The Bionic Telescope

    Science.gov (United States)

    Woolf, Neville

    2009-05-01

    Four hundred years after children in a spectacle makers workshop accidentally discovered the telescope, the development of this device has been a continuous replacement of the ``natural'' by the deliberate. The human eye is gone. The lens is gone. The tube is gone. The dome is on the verge of going. The size of the optics are ceasing to be set by transportation limits. Adaptive optics are preferred to stable optics. We deliberately break the Lagrange invariant. We focus on lasers instead of stars, and natural observing environments are being replaced by adaptive environments. The goals for the new ground based telescope encompass the oldest and newest ideas, to find signs of life elsewhere, and to find how all the universe developed.

  11. Calibrating the Athena telescope

    Science.gov (United States)

    de Bruijne, J.; Guainazzi, M.; den Herder, J.; Bavdaz, M.; Burwitz, V.; Ferrando, P.; Lumb, D.; Natalucci, L.; Pajot, F.; Pareschi, G.

    2017-10-01

    Athena is ESA's upcoming X-ray mission, currently set for launch in 2028. With two nationally-funded, state-of-the-art instruments (a high-resolution spectrograph named X-IFU and a wide-field imager named WFI), and a telescope collecting area of 1.4-2 m^2 at 1 keV, the calibration of the spacecraft is a challenge in itself. This poster presents the current (spring 2017) plan of how to calibrate the Athena telescope. It is based on a hybrid approach, using bulk manufacturing and integration data as well as dedicated calibration measurements combined with a refined software model to simulate the full response of the optics.

  12. Everyday Radio Telescope

    CERN Document Server

    Mandal, Pranshu; Kumar, Pratik; Yelikar, Anjali; Soni, Kanchan; T, Vineeth Krishna

    2016-01-01

    We have developed an affordable, portable college level radio telescope for amateur radio astronomy which can be used to provide hands-on experience with the fundamentals of a radio telescope and an insight into the realm of radio astronomy. With our set-up one can measure brightness temperature and flux of the Sun at 11.2 GHz and calculate the beam width of the antenna. The set-up uses commercially available satellite television receiving system and parabolic dish antenna. We report the detection of point sources like Saturn and extended sources like the galactic arm of the Milky way. We have also developed python pipeline, which are available for free download, for data acquisition and visualization.

  13. [Galileo and his telescope].

    Science.gov (United States)

    Strebel, Christoph

    2006-01-01

    Galileo's publication of observations made with his newly reinvented telescope provoked a fierce debate. In April 1610 Martinus Horky, a young Bohemian astronomer, had an opportunity to make his own observations with Galileo's telescope in the presence of Antonio Magini and other astronomers. Horky and the other witnesses denied the adequacy of Galileo's telescope and therefore the bona fides of his discoveries. Kepler conjectured Horky as well as all his witnesses to be myopic. But Kepler's objection could not stop the publication of Horky's Peregrinatio contra nuncium sidereum (Modena, 1610), the first printed refutation of Galileo's Sidereus nuncius. In his treatise, Horky adresses four questions: 1) Do the four newly observed heavenly bodies actually exist? Horky denies their existence on various grounds: a) God, as every astronomer teaches, has created only seven moveable heavenly bodies and astronomical knowledge originates in God, too. b) Heavenly bodies are either stars or planets. Galileo's moveable heavenly bodies fit into neither category. c) If they do exist, why have they not already been observed by other scholars? Horky concludes that there are no such heavenly bodies. 2) What are these phenomena? They are purely artefactual, and produced by Galileo's telescope. 3) How are they like? Galileo's "stars" are so small as to be almost invisible. Galileo claims that he has measured their distances from each other. This however is impossible due to their diminutive size and other observational problems. Hence, Galileo's claim is a further proof that he is a fraud. 4) Why are they? For Galileo they are a chance to earn money but for astronomers like Horky they are a reason to offer thanks and honour to God. Horky's treatise was favourably received by the enemies of Galileo. But Kepler's critique was devastating. After calling on Kepler in Prague, Horky had to revoke the contents of his book.

  14. X-Ray Bright Optically Faint AGNs Found in XMM-Newton and Subaru Hyper Suprime-Cam Surveys

    Science.gov (United States)

    Terashima, Y.; Suganuma, M.; Akiyama, M.; Greene, J.; Kawaguchi, T.; Iwasawa, K.; Nagao, T.; Toba, Y.; Ueda, Y.; Yamashita, T.

    2017-10-01

    We present a new sample of X-ray bright optically faint active galactic nuclei selected by combining XMM-Newton and Subaru Hyper Suprime-Cam surveys. 53 X-ray sources satisfying i band magnitude fainter than 23.5 mag and X-ray counts with EPIC-PN detector larger than 70 are selected from 9 deg^2 in the XMM-XXL field, and their spectral energy distributions (SEDs) and X-ray spectra are analyzed. 46 objects with an X-ray to i band flux ratio F_{X}/F_{i}>10 are classified as extreme X-ray-to-optical flux sources. SEDs of 48 among 53 are represented by templates of type 2 AGNs or starforming galaxies and show signature of stellar emission from host galaxies in the optical in the source rest frame. X-ray spectra are fitted by an absorbed power law model, and the intrinsic absorption column densities are modest (best-fit log N_{H} = 20.5-23.5 cm^{-2} in most cases). The absorption corrected X-ray luminosities are in a range of 6×10^{42}-2×10^{45} erg s^{-1}. 20 objects are classified as type 2 quasars. The optical faintness is explained by a combination of redshifts (mostly z>1.0), strong dust extinction, and in part a large ratio of dust/gas.

  15. ALMA Telescope Reaches New Heights

    Science.gov (United States)

    2009-09-01

    ball at a distance of nine miles, and to keep their smooth reflecting surfaces accurate to less than the thickness of a human hair. Once the transporter reached the high plateau it carried the antenna to a concrete pad -- a docking station with connections for power and fiber optics -- and positioned it with an accuracy of a small fraction of an inch. The transporter is guided by a laser steering system and, just like some cars, also has ultrasonic collision detectors. These sensors ensure the safety of the state-of-the-art antennas as the transporter drives them across what will soon be a rather crowded plateau. Ultimately, ALMA will have at least 66 antennas distributed over about 200 pads, spread over distances of up to 11.5 miles and operating as a single, giant telescope. Even when ALMA is fully operational, the transporters will be used to move the antennas between pads to reconfigure the telescope for different kinds of observations. This first ALMA antenna at the high site will soon be joined by others, and the ALMA team looks forward to making their first observations from the Chajnantor plateau. They plan to link three antennas by early 2010, and to make the first scientific observations with ALMA in the second half of 2011. ALMA will help astronomers answer important questions about our cosmic origins. The telescope will observe the Universe using light with millimeter and submillimeter wavelengths, between infrared light and radio waves in the electromagnetic spectrum. Light at these wavelengths comes from some of the coldest, and from some of the most distant objects in the cosmos. These include cold clouds of gas and dust where new stars are being born, or remote galaxies towards the edge of the observable universe. The Universe is relatively unexplored at submillimeter wavelengths, as the telescopes need extremely dry atmospheric conditions, such as those at Chajnantor, and advanced detector technology. The Atacama Large Millimeter/submillimeter Array

  16. MROI Array telescopes: the relocatable enclosure domes

    Science.gov (United States)

    Marchiori, G.; Busatta, A.; Payne, I.

    2016-07-01

    The MROI - Magdalena Ridge Interferometer is a project which comprises an array of up to 10 1.4m diameter mirror telescopes arranged in a "Y" configuration. Each of these telescopes will be housed inside a Unit Telescope Enclosure (UTE) which are relocatable onto any of 28 stations. EIE GROUP Srl, Venice - Italy, was awarded the contract for the design, the construction and the erection on site of the MROI by the New Mexico Institute of Mining and Technology. The close-pack array of the MROI - including all 10 telescopes, several of which are at a relative distance of less than 8m center to center from each other - necessitated an original design for the Unit Telescope Enclosure (UTE). This innovative design enclosure incorporates a unique dome/observing aperture system to be able to operate in the harsh environmental conditions encountered at an altitude of 10,460ft (3,188m). The main characteristics of this Relocatable Enclosure Dome are: a Light insulated Steel Structure with a dome made of composites materials (e.g. glass/carbon fibers, sandwich panels etc.), an aperture motorized system for observation, a series of louvers for ventilation, a series of electrical and plants installations and relevant auxiliary equipment. The first Enclosure Dome is now under construction and the completion of the mounting on site id envisaged by the end of 2016. The relocation system utilizes a modified reachstacker (a transporter used to handle freight containers) capable of maneuvering between and around the enclosures, capable of lifting the combined weight of the enclosure with the telescope (30tons), with minimal impacts due to vibrations.

  17. Design of optical systems for large space telescopes

    Science.gov (United States)

    Malamed, Evgeny R.; Sokolsky, M. N.

    1995-09-01

    On the basis of long-term experience of LOMO PLC in creating large optical systems for ground and space telescopes, with diameter of primary mirror from 1 to 6 meters, the following issues should be considered: principles of constructing optical systems for space telescopes and selecting their optimum design in respect of dimensions/mass and performance criteria; ensuring the fulfillment of image quality requirements in the process of manufacturing optical systems for controlling ground telescope elements in operating conditions; providing automatic adjustment of telescope secondary mirror, automatic focusing, interferometric control of image quality by means of stellar interferometer with radial shift and internal control with Gartman's test. Description of space telescope equipped with primary mirror of diameter 1.5 m, manufactured in LOMO PLC, is given.

  18. Receiving vectors of muon telescope of cosmic ray station "Novosibirsk"

    Science.gov (United States)

    Yanchukovskiy, Valeriy; Grigoryev, Vladislav; Krimsky, Germogen; Kuzmenko, Vasiliy; Molchanov, Anton

    2016-03-01

    The method of receiving vectors allows us to determine cosmic ray anisotropy at each moment. Also, the method makes it possible to study fast anisotropy fluctuations related to the interplanetary medium dynamics. Receiving vectors have been calculated earlier for neutron monitors and muon telescopes. However, the most of muon telescopes of the network of cosmic ray stations for which calculations were made does not operate now. In recent years, new improved detectors appeared. Unfortunately, the use of them is limited because of absence of receiving coefficients. These detectors include the matrix telescope in Novosibirsk. Therefore, components of receiving vector for muon telescopes of observation cosmic ray station "Novosibirsk" have been defined. Besides, design features of the facility, its orientation, and directional diagram depending on zenith and azimuth angles were taken into account. Also, for the system of telescopes, we allowed for coupling coefficients found experimentally using the test detector.

  19. Hubble Space Telescope: A cosmic time machine

    Science.gov (United States)

    Westphal, J. A.; Harms, R. J.; Brandt, J. C.; Bless, R. C.; Macchetto, F. D.; Jefferys, W. H.

    1991-01-01

    The mission of the Hubble Space Telescope (HST) is to explore the expanding and evolving universe. During the 3,000 operating hours every year for the next 15 years or more, the HST will be used to study: galaxies; pulsars; globular clusters; neighboring stars where planets may be forming; binary star systems; condensing gas clouds and their chemical composition; and the rings of Saturn and the swirling ultraviolet clouds of Venus. The major technical achievements - its nearly perfect mirrors, its precise guidance system of rate gyroscopes, reaction wheels, star trackers, and fine guidance sensors are briefly discussed. The scientific instruments on board HST are briefly described. The integration of the equipment and instruments is outlined. The Space Telescope Science Institute (STScI) has approved time for 162 observations from among 556 proposals. The mission operation and data flow are explained.

  20. Is Your Telescope Tweeting?

    Science.gov (United States)

    Atkinson, Nancy

    2009-05-01

    Half of the world's population today was born after the Apollo Moon landings. The best way to reach this generation and get them excited about today's space exploration and astronomy news and events is through online social media, which are technologies that allow anyone to communicate with everyone. Twitter is a growing popular social media tool that uses short, 140 character "Tweets" to quickly and concisely convey updates on what you "are doing." With the right combination of information, personality and fun, telescopes and spacecraft are using Twitter for public outreach, providing important status updates while making the public feel like they are part of the mission.

  1. Time to Revisit the Heterogeneous Telescope Network

    Science.gov (United States)

    Hessman, F. V.

    The "Heterogeneous Telescope Network" (HTN) was founded in 2005 as a loose collaboration of people somehow associated with robotic telescopes and/or projects interested in the transient universe. Other than being a very interesting forum for the exchange of ideas, the only lasting contribution of the HTN was a proposed protocol for the operation of a loose e-market for the exchange of telescope time (Allan et al. 2006; White & Allan 2007). Since the last formal meeting in 2007, the HTN has gone into a "Dornröschenschlaf" (a better word than "hibernation") : the players and interest are there, but the public visibility and activity is not. Although the participants knew and know that global networking is the way of the future for many types of science, various things have kept the HTN from taking the idea and actually implementing it: work on simply getting one's own system to work (e.g. myself), career paths of major players (e.g. Allan), dealing with the complexity of ones' own network (TALONS, RoboNet, LCO), and - most importantly - no common science driver big enough to push the participants to try it in earnest. Things have changed, however: robotic telescopes have become easier to create and operate, private networks have matured, large-scale consortia have become more common, event reporting using VOEvent has become the global standard and has a well-defined infrastructure, and large-scale sources of new objects and events are operating or will soon be operating (OGLE, CSS, Pan-STARRs, GAIA). I will review the scientific and sociological prospects for re-invigorating the HTN idea and invite discussion.

  2. Demonstration of an efficient, photonic-based astronomical spectrograph on an 8-m telescope

    Science.gov (United States)

    Jovanovic, N.; Cvetojevic, N.; Norris, B.; Betters, C.; Schwab, C.; Lozi, J.; Guyon, O.; Gross, S.; Martinache, F.; Tuthill, P.; Doughty, D.; Minowa, Y.; Takato, N.; Lawrence, J.

    2017-07-01

    We demonstrate for the first time an efficient, photonic-based astronomical spectrograph on the 8-m Subaru Telescope. An extreme adaptive optics system is combined with pupil apodiziation optics to efficiently inject light directly into a single-mode fiber, which feeds a compact cross-dispersed spectrograph based on array waveguide grating technology. The instrument currently offers a throughput of 5% from sky-to-detector which we outline could easily be upgraded to ~13% (assuming a coupling efficiency of 50%). The isolated spectrograph throughput from the single-mode fiber to detector was 42% at 1550 nm. The coupling efficiency into the single-mode fiber was limited by the achievable Strehl ratio on a given night. A coupling efficiency of 47% has been achieved with ~60% Strehl ratio on-sky to date. Improvements to the adaptive optics system will enable 90% Strehl ratio and a coupling of up to 67% eventually. This work demonstrates that the unique combination of advanced technologies enables the realization of a compact and highly efficient spectrograph, setting a precedent for future instrument design on very-large and extremely-large telescopes.

  3. Tilt-Sensitivity Analysis for Space Telescopes

    Science.gov (United States)

    Papalexandris, Miltiadis; Waluschka, Eugene

    2003-01-01

    A report discusses a computational-simulation study of phase-front propagation in the Laser Interferometer Space Antenna (LISA), in which space telescopes would transmit and receive metrological laser beams along 5-Gm interferometer arms. The main objective of the study was to determine the sensitivity of the average phase of a beam with respect to fluctuations in pointing of the beam. The simulations account for the effects of obscurations by a secondary mirror and its supporting struts in a telescope, and for the effects of optical imperfections (especially tilt) of a telescope. A significant innovation introduced in this study is a methodology, applicable to space telescopes in general, for predicting the effects of optical imperfections. This methodology involves a Monte Carlo simulation in which one generates many random wavefront distortions and studies their effects through computational simulations of propagation. Then one performs a statistical analysis of the results of the simulations and computes the functional relations among such important design parameters as the sizes of distortions and the mean value and the variance of the loss of performance. These functional relations provide information regarding position and orientation tolerances relevant to design and operation.

  4. IAA RAS Radio Telescope Monitoring System

    Science.gov (United States)

    Mikhailov, A.; Lavrov, A.

    2007-07-01

    Institute of Applied Astronomy of the Russian Academy of Sciences (IAA RAS) has three identical radio telescopes, the receiving complex of which consists of five two-channel receivers of different bands, six cryogen systems, and additional devices: four local oscillators, phase calibration generators and IF commutator. The design, hardware and data communication protocol are described. The most convenient way to join the devices of the receiving complex into the common monitoring system is to use the interface which allows to connect numerous devices to the data bus. For the purpose of data communication regulation and to exclude conflicts, a data communication protocol has been designed, which operates with complex formatted data sequences. Formation of such sequences requires considerable data processing capability. That is provided by a microcontroller chip in each slave device. The test version of the software for the central computer has been developed in IAA RAS. We are developing the Mark IV FS software extension modules, which will allow us to control the receiving complex of the radio telescope by special SNAP commands from both operator input and schedule files. We are also developing procedures of automatic measurements of SEFD, system noise temperature and other parameters, available both in VLBI and single-dish modes of operation. The system described has been installed on all IAA RAS radio telescopes at "Svetloe", "Zelenchukskaya" and "Badary" observatories. It has proved to be working quite reliably and to show the perfonmance expected.

  5. Polaris Tracking Telescope

    Science.gov (United States)

    Ritchie, Justin; Castelaz, M.; Cline, D. J.

    2009-01-01

    Pisgah Astronomical Research Institute (PARI) in Rosman, NC has been imaging 5 degrees of the sky surrounding Polaris since 2004 using a wide-angle lens and CCD camera. The images are used for differential photometry and to measure the variation in brightness of the Polaris itself. To enhance the quality of the measurements of Polaris a special robotic telescope mount was built to accommodate a narrow field-of-view telescope that focuses on Polaris alone. The movement of Polaris is a circle about 1 degree in radius every 24 hours which is 1 arcsecond every 8 seconds of clock time. The design team had to consider that the polar axis is on a 19-year cycle due to the changing lunar gravitational attractions upon the earth's equatorial bulge. There are several components to this effect. The lunar component amplitude is +/-9 arcseconds towards the ecliptic pole with a period of 18.6 years. The solar component is +/- 1.2 arcseconds over 0.5 years; there is a 'fortnightly nutation' of +/- 0.1 arcseconds per 5 days; there is also a seasonal variation caused by the movement of airm asses of +/- 0.18 arcseconds per year. Utilizing two CCD cameras, the SBIG STV and the SBIG ST7 we can capture the image of Polaris by following the path of the star in the sky with linear actuators set to the coordinates of its circular path.

  6. Origins Space Telescope

    Science.gov (United States)

    Cooray, Asantha; Origins Space Telescope Study Team

    2018-01-01

    The Origins Space Telescope (OST) is the mission concept for the Far-Infrared Surveyor, a study in development by NASA in preparation for the 2020 Astronomy and Astrophysics Decadal Survey. Origins is planned to be a large aperture, actively-cooled telescope covering a wide span of the mid- to far-infrared spectrum. Its spectrographs will enable 3D surveys of the sky that will discover and characterize the most distant galaxies, Milky-Way, exoplanets, and the outer reaches of our Solar system. Origins will enable flagship-quality general observing programs led by the astronomical community in the 2030s. The Science and Technology Definition Team (STDT) would like to hear your science needs and ideas for this mission. The team can be contacted at firsurveyor_info@lists.ipac.caltech.edu. This presentation will provide a summary of the OST STDT, our completed first mission concept and an introduction to the second concept that will be studied at the study center in 2018. This presentation will also summarize key science drivers and the key study milestones between 2018 and 2020.

  7. Deep space telescopes

    CERN Multimedia

    CERN. Geneva

    2006-01-01

    The short series of seminars will address results and aims of current and future space astrophysics as the cultural framework for the development of deep space telescopes. It will then present such new tools, as they are currently available to, or imagined by, the scientific community, in the context of the science plans of ESA and of all major world space agencies. Ground-based astronomy, in the 400 years since Galileo’s telescope, has given us a profound phenomenological comprehension of our Universe, but has traditionally been limited to the narrow band(s) to which our terrestrial atmosphere is transparent. Celestial objects, however, do not care about our limitations, and distribute most of the information about their physics throughout the complete electromagnetic spectrum. Such information is there for the taking, from millimiter wavelengths to gamma rays. Forty years astronomy from space, covering now most of the e.m. spectrum, have thus given us a better understanding of our physical Universe then t...

  8. X-ray-bright optically faint active galactic nuclei in the Subaru Hyper Suprime-Cam wide survey

    Science.gov (United States)

    Terashima, Yuichi; Suganuma, Makoto; Akiyama, Masayuki; Greene, Jenny E.; Kawaguchi, Toshihiro; Iwasawa, Kazushi; Nagao, Tohru; Noda, Hirofumi; Toba, Yoshiki; Ueda, Yoshihiro; Yamashita, Takuji

    2017-11-01

    We construct a sample of X-ray-bright optically faint active galactic nuclei by combining Subaru Hyper Suprime-Cam, XMM-Newton, and infrared source catalogs. Fifty-three X-ray sources satisfying i-band magnitude fainter than 23.5 mag and X-ray counts with the EPIC-PN detector larger than 70 are selected from 9.1 deg2, and their spectral energy distributions (SEDs) and X-ray spectra are analyzed. Forty-four objects with an X-ray to i-band flux ratio FX/Fi > 10 are classified as extreme X-ray-to-optical flux sources. Spectral energy distributions of 48 among 53 are represented by templates of type 2 AGNs or star-forming galaxies and show the optical signature of stellar emission from host galaxies in the source rest frame. Infrared/optical SEDs indicate a significant contribution of emission from dust to the infrared fluxes, and that the central AGN is dust obscured. The photometric redshifts determined from the SEDs are in the range of 0.6-2.5. The X-ray spectra are fitted by an absorbed power-law model, and the intrinsic absorption column densities are modest (best-fit log NH = 20.5-23.5 cm-2 in most cases). The absorption-corrected X-ray luminosities are in the range of 6 × 1042-2 × 1045 erg s-1. Twenty objects are classified as type 2 quasars based on X-ray luminsosity and NH. The optical faintness is explained by a combination of redshifts (mostly z > 1.0), strong dust extinction, and in part a large ratio of dust/gas.

  9. Perspectives with the GCT end-to-end prototype of the small-sized telescope proposed for the Cherenkov telescope array

    Science.gov (United States)

    Costantini, H.; Dournaux, J.-L.; Ernenwein, J.-P.; Laporte, P.; Sol, H.

    2017-01-01

    In the framework of the Cherenkov Telescope Array (CTA), the GCT (Gamma-ray Cherenkov Telescope) team is building a dual-mirror telescope as one of the proposed prototypes for the CTA small size class of telescopes. The telescope is based on a Schwarzschild-Couder (SC) optical design, an innovative solution for ground-based Cherenkov astronomy, which allows a compact telescope structure, a lightweight large Field of View (FoV) camera and enables good angular resolution across the entire FoV. We review the different mechanical and optical components of the telescope. In order to characterise them, the Paris prototype will be operated during several weeks in 2016. In this framework, an estimate of the expected performance of this prototype has been made, based on Monte Carlo simulations. In particular the observability of the Crab Nebula in the context of high Night Sky Background (NSB) is presented.

  10. Why Space Telescopes Are Amazing

    Science.gov (United States)

    Rigby, Jane R.

    2012-01-01

    One of humanity's best ideas has been to put telescopes in space. The dark stillness of space allows telescopes to perform much better than they can on even the darkest and clearest of Earth's mountaintops. In addition, from space we can detect colors of light, like X-rays and gamma rays, that are blocked by the Earth's atmosphere I'll talk about NASA's team of great observatories: the Hubble Space Telescope, Spitzer Space Telescope, and Chandra X-ray Observatory} and how they've worked together to answer key questions: When did the stars form? Is there really dark matter? Is the universe really expanding ever faster and faster?

  11. Thermal Design and Thermal Behaviour of Radio Telescopes and their Enclosures

    CERN Document Server

    Greve, Albert

    2010-01-01

    Radio telescopes as well as communication antennas operate under the influence of gravity, temperature and wind. Among those, temperature influences may degrade the performance of a radio telescope through transient changes of the focus, pointing, path length and sensitivity, often in an unpredictable way. Thermal Design and Thermal Behaviour of Radio Telescopes and their Enclosures reviews the design and construction principles of radio telescopes in view of thermal aspects and heat transfer with the variable thermal environment; it explains supporting thermal model calculations and the application and efficiency of thermal protection and temperature control; it presents many measurements illustrating the thermal behaviour of telescopes in the environment of their observatory sites. The book benefits scientists and radio/communication engineers, telescope designers and construction firms as well as telescope operators, observatory staff, but also the observing astronomer who is directly confronted with the t...

  12. Asteroid Detection Results Using the Space Surveillance Telescope

    Science.gov (United States)

    2015-10-18

    Distribution Statement A: Approved for public release, distribution unlimited. Asteroid Detection Results Using the Space Surveillance Telescope...USA ABSTRACT From 1998-2013, MIT Lincoln Laboratory operated a highly successful near-Earth asteroid search program using...two 1-m optical telescopes located at the MIT Lincoln Laboratory Experimental Test Site (ETS) in Socorro, N.M. In 2014, the Lincoln Near-Earth Asteroid

  13. The Aloha Telescope for K-12 STEM Education

    Science.gov (United States)

    Sowell, James R.

    2015-01-01

    How does one bring night-time astronomical observations into the classroom? How does a teacher - during the school day - show students the craters on the Moon, the rings of Saturn, or the four Galilean moons of Jupiter? One of the greatest drawbacks to teaching Astronomy is the lack of real-time telescopic observations during the school day, and yet this is a very exciting time for astronomical discoveries. The solution is to access a telescope in a substantially different time zone where it is still night. This facility - the Aloha Telescope - on Maui has already been established by a partnership between Georgia Tech and the Air Force Research Lab. This robotic telescope's sole purpose is for K-12 education, as it is equipped with a video-camera and is operated remotely via high-speed internet connections. This facility and its outreach program allow east-coast teachers and, in turn, students to have local daytime access to - and direct control of - the telescope. When observing the Moon, teachers and students will move the telescope wherever they wish across the highly-magnified lunar surface (~ 5 arcminute FOV). This telescope will enable night-time astronomical observations to come alive as day-time activities and will be an important tool for STEM education and activities. The use of the Aloha Telescope requires minimal training and is free after registering for a date and time.Dr. Sowell has written specific telescopic exercises and surface feature tours appropriate for K-12 and college-level users. These exercises, and other aspects of the Aloha Telescope and program, are posted on the website at http://aloha.gatech.edu

  14. The metagenomic telescope.

    Directory of Open Access Journals (Sweden)

    Balázs Szalkai

    Full Text Available Next generation sequencing technologies led to the discovery of numerous new microbe species in diverse environmental samples. Some of the new species contain genes never encountered before. Some of these genes encode proteins with novel functions, and some of these genes encode proteins that perform some well-known function in a novel way. A tool, named the Metagenomic Telescope, is described here that applies artificial intelligence methods, and seems to be capable of identifying new protein functions even in the well-studied model organisms. As a proof-of-principle demonstration of the Metagenomic Telescope, we considered DNA repair enzymes in the present work. First we identified proteins in DNA repair in well-known organisms (i.e., proteins in base excision repair, nucleotide excision repair, mismatch repair and DNA break repair; next we applied multiple alignments and then built hidden Markov profiles for each protein separately, across well-researched organisms; next, using public depositories of metagenomes, originating from extreme environments, we identified DNA repair genes in the samples. While the phylogenetic classification of the metagenomic samples are not typically available, we hypothesized that some very special DNA repair strategies need to be applied in bacteria and Archaea living in those extreme circumstances. It is a difficult task to evaluate the results obtained from mostly unknown species; therefore we applied again the hidden Markov profiling: for the identified DNA repair genes in the extreme metagenomes, we prepared new hidden Markov profiles (for each genes separately, subsequent to a cluster analysis; and we searched for similarities to those profiles in model organisms. We have found well known DNA repair proteins, numerous proteins with unknown functions, and also proteins with known, but different functions in the model organisms.

  15. Infrared up-conversion telescope

    DEFF Research Database (Denmark)

    2014-01-01

    There is presented to an up-conversion infrared telescope (110) arranged for imaging an associated scene (130), wherein the up-conversion infrared telescope (110) comprises a non-linear crystal (120) arranged for up-conversion of infrared electromagnetic radiation, and wherein a first optical...

  16. Galileo Italian National Telescope and its instrumentation

    Science.gov (United States)

    Barbieri, Cesare

    1997-03-01

    This paper gives an overview of the present status of the Telescopio Nazionale Galileo (TNG), a 3.5 m, active-optics telescope for the Italian community, whose initial characteristics were derived from those of the ESO NTT. For a more detailed description see e.g. in Barbieri et al. (1994). Its site is the Observatorio del Roque de los Muchachos, in the Canary Island of La Palma, on the West side of the mountain, at an altitude of about 2360 m. Construction and erection activities, started in 1993, are nearing completion. The telescope structure has been installed inside the rotating dome. The three main mirrors have also been transported to the mountain and aluminized in the WHT plant. They will shortly be installed in the telescope. Three major subsystems still undergo intensive activity in Italy, namely testing of the M2 and M3 units, testing of the operational version of the control hardware and software, and construction of the two rotator adapters for the Nasmyth foci. First light instruments are also being built. Arm A of the telescope is reserved for the imaging section, composed by a visual camera, a near-IR camera, plus a common adaptive optics module. On the other arm B, a faint object spectrograph with long slit, atmospheric dispersion corrector, multiobject and imaging capabilities, will be mounted. A fixed high resolution spectrograph with optical derotation is also being designed. Attention has already been given to the archive of the data. It is planned to have first light before the end of 1996, and to start regular scientific operations after an adequate period of debugging and commissioning.

  17. The Timepix3 Telescope for LHCb Upgrade RD 1 measurements

    CERN Document Server

    Saunders, Daniel Martin

    2016-01-01

    The Timepix3 telescope is a high rate, data driven beam telescope created for LHCb upgrade studies, such as sensor performance for prototypes of the vertex locator (VELO) upgrade. When testing VELO prototypes the readout is identical to the telescope, and additionally, a simple way to integrate triggers from other detectors is also provided, allowing tracks to be synchronised offline with other devices under test. Examples of LHCb upgrade detectors which have been qualified with the Timepix3 telescope are the Upstream Tracker (UT), Scintillating Fibres (SciFi), Ring Imaging CHerenkov (RICH), and Time Of internally Reflected CHerenkov light (TORCH). The telescope was installed in the SPS North hall at CERN. It consists of 8 planes with 300 μ m p-on-n silicon sensors read out by Timepix3 ASICs. Tracks measured with the telescope have excellent temporal ( ∼ 1 ns) and spatial resolution ( 2 μ m). The telescope has been operated with a rate of tracks written to disk up to 5 MHz - limited only by conditions at ...

  18. The UVES Large Program for testing fundamental physics - III. Constraints on the fine-structure constant from three telescopes

    Science.gov (United States)

    Evans, T. M.; Murphy, M. T.; Whitmore, J. B.; Misawa, T.; Centurion, M.; D'Odorico, S.; Lopez, S.; Martins, C. J. A. P.; Molaro, P.; Petitjean, P.; Rahmani, H.; Srianand, R.; Wendt, M.

    2014-11-01

    Large statistical samples of quasar spectra have previously indicated possible cosmological variations in the fine-structure constant, α. A smaller sample of higher signal-to-noise ratio spectra, with dedicated calibration, would allow a detailed test of this evidence. Towards that end, we observed equatorial quasar HS 1549+1919 with three telescopes: the Very Large Telescope, Keck and, for the first time in such analyses, Subaru. By directly comparing these spectra to each other, and by `supercalibrating' them using asteroid and iodine-cell tests, we detected and removed long-range distortions of the quasar spectra's wavelength scales which would have caused significant systematic errors in our α measurements. For each telescope we measure the relative deviation in α from the current laboratory value, Δα/α, in three absorption systems at redshifts zabs = 1.143, 1.342 and 1.802. The nine measurements of Δα/α are all consistent with zero at the 2σ level, with 1σ statistical (systematic) uncertainties 5.6-24 (1.8-7.0) parts per million (ppm). They are also consistent with each other at the 1σ level, allowing us to form a combined value for each telescope and, finally, a single value for this line of sight: Δα/α = -5.4 ± 3.3stat ± 1.5sys ppm, consistent with both zero and previous, large samples. We also average all Large Programme results measuring Δα/α = -0.6 ± 1.9stat ± 0.9sys ppm. Our results demonstrate the robustness and reliability at the 3 ppm level afforded by supercalibration techniques and direct comparison of spectra from different telescopes.

  19. LAST: Laser Array Space Telescope

    Science.gov (United States)

    Madajian, Jonathan A.; Cohen, Alexander; Hwang, Rebecca; Bishman, Chase; Reyes, Rachel; Bautista, Miguel; Tsukamoto, Ryan; Pon, Brandon; Vanmali, Dylan; Xu, Xu; Rommelfanger, Nicholas; Ho, Ian; Lin, Lucas; Prazak, Michael; Ruehl, Patrick; Brashears, Travis; Rupert, Nic; Lubin, Philip

    2016-09-01

    A phased array operates by modulating the phases of several signals, allowing electronic control over the locations that these signals interfere constructively or destructively, allowing the beam to be steered. A space-based laser phased array, called the Directed Energy System for Targeting of Asteroids and exploRation (DE-STAR) has previously been posited by our group for a number of uses, from planetary defense to relativistic propulsion of small probes. Here we propose using the same basic system topology as a receiver rather than a transmitter. All of the components in the system, excluding the laser, are bidirectional. Rather than each elements transmitting laser light, they would instead receive light, which will then be combined to create an interference pattern that can be imaged onto a focal plane. The Laser Array Space Telescope (LAST) uses most of the same components and metrology as DE-STAR and could thus be integrated into a singular system, allowing both transmit and receive modes. This paper discusses the possible applications of this system from laser communications to astrophysics.

  20. The Atacama Cosmology Telescope: The Receiver and Instrumentation

    Science.gov (United States)

    Swetz, D. S.; Ade, P. A. R.; Amiri, M.; Appel, J. W.; Burger, B.; Devlin, M. J.; Dicker, S. R.; Doriese, W. B.; Essinger-Hileman, T.; Fisher, R. P.; hide

    2010-01-01

    The Atacama Cosmology Telescope was designed to measure small-scale anisotropies in the Cosmic Microwave Background and detect galaxy clusters through the Sunyaev-Zel'dovich effect. The instrument is located on Cerro Taco in the Atacama Desert, at an altitude of 5190 meters. A six-met.er off-axis Gregorian telescope feeds a new type of cryogenic receiver, the Millimeter Bolometer Array Camera. The receiver features three WOO-element arrays of transition-edge sensor bolometers for observations at 148 GHz, 218 GHz, and 277 GHz. Each detector array is fed by free space mm-wave optics. Each frequency band has a field of view of approximately 22' x 26'. The telescope was commissioned in 2007 and has completed its third year of operations. We discuss the major components of the telescope, camera, and related systems, and summarize the instrument performance.

  1. An EUDET/AIDA Pixel Beam Telescope for Detector Development

    CERN Document Server

    Rubinskiy, I

    2015-01-01

    Ahigh resolution(σ< 2 μm) beam telescope based on monolithic active pixel sensors (MAPS) was developed within the EUDET collaboration. EUDET was a coordinated detector R&D programme for the future International Linear Collider providing test beam infrastructure to detector R&D groups. The telescope consists of six sensor planes with a pixel pitch of either 18.4 μm or 10 μmand canbe operated insidea solenoidal magnetic fieldofupto1.2T.Ageneral purpose cooling, positioning, data acquisition (DAQ) and offine data analysis tools are available for the users. The excellent resolution, readout rate andDAQintegration capabilities made the telescopea primary beam tests tool also for several CERN based experiments. In this report the performance of the final telescope is presented. The plans for an even more flexible telescope with three differentpixel technologies(ATLASPixel, Mimosa,Timepix) withinthenew European detector infrastructure project AIDA are presented.

  2. The University of Durham Mark 3 very high energy gamma ray telescope

    Science.gov (United States)

    Chadwick, P. M.; Dipper, N. A.; Dowthwaite, J. C.; Kirkman, I. W.; Mccomb, T. J.; Orford, K. J.; Turver, K. E.

    1985-01-01

    A new very high energy gamma-ray telescope employing the atmospheric Cerenkov light technique and currently nearing completion is described. The telescope is designed to have capability as both a wide angle instrument (4 degree field of view) for sky survey work and as a narrow field of view instrument (1.35 degrees) for conventional drift-scanning and tracking modes of operation. The telescope consists of two 10 sq. m. mirrors operated in fast coincidence with multiple phototube assemblies at the prime focus of each mirror. The design philosophy of the instrument is discussed and comparisons of its performance with our previous telescopes are made.

  3. First results of the Test-Bed Telescopes (TBT) project: Cebreros telescope commissioning

    Science.gov (United States)

    Ocaña, Francisco; Ibarra, Aitor; Racero, Elena; Montero, Ángel; Doubek, Jirí; Ruiz, Vicente

    2016-07-01

    The TBT project is being developed under ESA's General Studies and Technology Programme (GSTP), and shall implement a test-bed for the validation of an autonomous optical observing system in a realistic scenario within the Space Situational Awareness (SSA) programme of the European Space Agency (ESA). The goal of the project is to provide two fully robotic telescopes, which will serve as prototypes for development of a future network. The system consists of two telescopes, one in Spain and the second one in the Southern Hemisphere. The telescope is a fast astrograph with a large Field of View (FoV) of 2.5 x 2.5 square-degrees and a plate scale of 2.2 arcsec/pixel. The tube is mounted on a fast direct-drive mount moving with speed up to 20 degrees per second. The focal plane hosts a 2-port 4K x 4K back-illuminated CCD with readout speeds up to 1MHz per port. All these characteristics ensure good survey performance for transients and fast moving objects. Detection software and hardware are optimised for the detection of NEOs and objects in high Earth orbits (objects moving from 0.1-40 arcsec/second). Nominal exposures are in the range from 2 to 30 seconds, depending on the observational strategy. Part of the validation scenario involves the scheduling concept integrated in the robotic operations for both sensors. Every night it takes all the input needed and prepares a schedule following predefined rules allocating tasks for the telescopes. Telescopes are managed by RTS2 control software, that performs the real-time scheduling of the observation and manages all the devices at the observatory.1 At the end of the night the observing systems report astrometric positions and photometry of the objects detected. The first telescope was installed in Cebreros Satellite Tracking Station in mid-2015. It is currently in the commissioning phase and we present here the first results of the telescope. We evaluate the site characteristics and the performance of the TBT Cebreros

  4. Development of telescope control system for the 50cm telescope of UC Observatory Santa Martina

    Science.gov (United States)

    Shen, Tzu-Chiang; Soto, Ruben; Reveco, Johnny; Vanzi, Leonardo; Fernández, Jose M.; Escarate, Pedro; Suc, Vincent

    2012-09-01

    The main telescope of the UC Observatory Santa Martina is a 50cm optical telescope donated by ESO to Pontificia Universidad Catolica de Chile. During the past years the telescope has been refurbished and used as the main facility for testing and validating new instruments under construction by the center of Astro-Engineering UC. As part of this work, the need to develop a more efficient and flexible control system arises. The new distributed control system has been developed on top of Internet Communication Engine (ICE), a framework developed by Zeroc Inc. This framework features a lightweight but powerful and flexible inter-process communication infrastructure and provides binding to classic and modern programming languages, such as, C/C++, java, c#, ruby-rail, objective c, etc. The result of this work shows ICE as a real alternative for CORBA and other de-facto distribute programming framework. Classical control software architecture has been chosen and comprises an observation control system (OCS), the orchestrator of the observation, which controls the telescope control system (TCS), and detector control system (DCS). The real-time control and monitoring system is deployed and running over ARM based single board computers. Other features such as logging and configuration services have been developed as well. Inter-operation with other main astronomical control frameworks are foreseen in order achieve a smooth integration of instruments when they will be integrated in the main observatories in the north of Chile

  5. The James Webb Space Telescope

    Science.gov (United States)

    Mather, John C.

    2004-01-01

    The James Webb Space Telescope (JWST) will extend the discoveries of the Hubble Space Telescope (HST) and the Spitzer Space Telescope (SST) by deploying a large cooled infrared telescope around the Sun-Earth Lagrange point L2. With a 6 m aperture and three instruments covering the wavelength range from 0.6 to 28 microns, it will provide sensitivities orders of magnitude better than any other facilities. It is intended to observe the light from the first galaxies and the first supernovae, the assembly of galaxies, and the formation and evolution of stars and planetary systems. In this talk I will review the scientific objectives and the ability of the system to meet them. I will close with a summary of possible future IR space missions, ranging from the far IR to planet-finding coronagraphs and interferometers

  6. Large aperture Fresnel telescopes/011

    Energy Technology Data Exchange (ETDEWEB)

    Hyde, R.A., LLNL

    1998-07-16

    At Livermore we`ve spent the last two years examining an alternative approach towards very large aperture (VLA) telescopes, one based upon transmissive Fresnel lenses rather than on mirrors. Fresnel lenses are attractive for VLA telescopes because they are launchable (lightweight, packagable, and deployable) and because they virtually eliminate the traditional, very tight, surface shape requirements faced by reflecting telescopes. Their (potentially severe) optical drawback, a very narrow spectral bandwidth, can be eliminated by use of a second (much smaller) chromatically-correcting Fresnel element. This enables Fresnel VLA telescopes to provide either single band ({Delta}{lambda}/{lambda} {approximately} 0.1), multiple band, or continuous spectral coverage. Building and fielding such large Fresnel lenses will present a significant challenge, but one which appears, with effort, to be solvable.

  7. Advanced Technology Solar Telescope Construction: Progress Report

    Science.gov (United States)

    Rimmele, Thomas R.; McMullin, J.; Keil, S.; Goode, P.; Knoelker, M.; Kuhn, J.; Rosner, R.; ATST Team

    2012-05-01

    The 4m Advance Technology Solar Telescope (ATST) on Haleakala will be the most powerful solar telescope and the world’s leading ground-based resource for studying solar magnetism that controls the solar wind, flares, coronal mass ejections and variability in the Sun’s output. The ATST will provide high resolution and high sensitivity observations of the dynamic solar magnetic fields throughout the solar atmosphere, including the corona at infrared wavelengths. With its 4 m aperture, ATST will resolve magnetic features at their intrinsic scales. A high order adaptive optics system delivers a corrected beam to the initial set of five state-of-the-art, facility class instrumentation located in the coude laboratory facility. Photopheric and chromospheric magnetometry is part of the key mission of four of these instruments. Coronal magnetometry and spectroscopy will be performed by two of these instruments at infrared wavelengths. The ATST project has transitioned from design and development to its construction phase. Site construction is expected to begin in April 2012. The project has awarded design and fabrication contracts for major telescope subsystems. A robust instrument program has been established and all instruments have passed preliminary design reviews or critical design reviews. A brief overview of the science goals and observational requirements of the ATST will be given, followed by a summary of the project status of the telescope and discussion of the approach to integrating instruments into the facility. The National Science Foundation (NSF) through the National Solar Observatory (NSO) funds the ATST Project. The NSO is operated under a cooperative agreement between the Association of Universities for Research in Astronomy, Inc. (AURA) and NSF.

  8. The origins of the telescope

    OpenAIRE

    van Helden, A.; Dupré, S.; van Gent, R.; Zuidervaart, H.J.

    2011-01-01

    The origins of the telescope have been debated since the instrument’s appearance in the Hague in 1608. Civic and national pride has led local dignitaries, popular writers, and scholars to present sharply divergent histories over the years, crediting a variety of people and places with the invention. Drawing on newly discovered documents, re-examined records, and tests of early lenses and telescopes, this fascinating study proposes a new and convincing account of the origins of the instrument ...

  9. Hubble Space Telescope-Illustration

    Science.gov (United States)

    1989-01-01

    This illustration depicts a side view of the Hubble Space Telescope (HST). The HST is the product of a partnership between NASA, European Space Agency Contractors, and the international community of astronomers. It is named after Edwin P. Hubble, an American Astronomer who discovered the expanding nature of the universe and was the first to realize the true nature of galaxies. The purpose of the HST, the most complex and sensitive optical telescope ever made, is to study the cosmos from a low-Earth orbit. By placing the telescope in space, astronomers are able to collect data that is free of the Earth's atmosphere. The HST detects objects 25 times fainter than the dimmest objects seen from Earth and provides astronomers with an observable universe 250 times larger than visible from ground-based telescopes, perhaps as far away as 14 billion light-years. The HST views galaxies, stars, planets, comets, possibly other solar systems, and even unusual phenomena such as quasars, with 10 times the clarity of ground-based telescopes. The major elements of the HST are the Optical Telescope Assembly (OTA), the Support System Module (SSM), and the Scientific Instruments (SI). The HST is approximately the size of a railroad car, with two cylinders joined together and wrapped in a silvery reflective heat shield blanket. Wing-like solar arrays extend horizontally from each side of these cylinders, and dish-shaped anternas extend above and below the body of the telescope. The HST was deployed from the Space Shuttle Discovery (STS-31 mission) into Earth orbit in April 1990. The Marshall Space Flight Center had responsibility for design, development, and construction of the HST. The Perkin-Elmer Corporation, in Danbury, Connecticut, developed the optical system and guidance sensors. The Lockheed Missile and Space Company of Sunnyvale, California produced the protective outer shroud and spacecraft systems, and assembled and tested the finished telescope.

  10. The Large Binocular Telescope Project

    Science.gov (United States)

    Hill, J. M.

    1994-12-01

    The Large Binocular Telescope (LBT) Project has evolved from concepts first proposed in 1985. The present partners involved in the design and construction of this 2 x 8.4 meter binocular telescope are the University of Arizona, Italy represented by the Osservatorio Astronomico di Arcetri and the Research Corporation based in Tucson. These three partners have committed sufficient funds to build the enclosure and the telescope populated with a single 8.4 meter optical train --- approximately 40 million dollars (1989). Based on this commitment, design and construction activities are now moving forward. Additional partners are being sought. The next mirror to be cast at the Steward Observatory Mirror Lab in late fall 1995 will be the first borosilicate honeycomb primary for LBT. The baseline optical configuration of LBT includes wide field Cassegrain secondaries with optical foci above the primaries to provide a corrected one degree field at F/4. The infrared F/15 secondaries are a Gregorian design to allow maximum flexibility for adaptive optics. The F/15 secondaries are undersized to provide a low thermal background focal plane which is unvignetted over a 4 arcminute diameter field-of-view. The interferometric focus combining the light from the two 8.4 meter primaries will reimage two folded Gregorian focal planes to a central location. The telescope elevation structure accommodates swing arms which allow rapid interchange of the various secondary and tertiary mirrors. Maximum stiffness and minimal thermal disturbance continue to be important drivers for the detailed design of the telescope. The telescope structure accommodates installation of a vacuum bell jar for aluminizing the primary mirrors in-situ on the telescope. The detailed design of the telescope structure will be completed in 1995 by ADS Italia (Lecco) and European Industrial Engineering (Mestre). The final enclosure design is now in progress at M3 Engineering (Tucson) and ADS Italia. Construction

  11. Demonstration Telescopes Using "Dollar Optics"

    Science.gov (United States)

    Ross, Paul

    2008-05-01

    I propose a poster that illustrates the use of "dollar optics” for experimentation and for the creation of demonstration telescopes. Handling a variety of lenses and mirrors provides an opportunity for discovering practical optics. Some part of this path of exploration must have been traveled by Galileo as he experimented with spectacle lenses. "Dollar optics” include reading glasses (positive meniscus lenses), convex and concave mirrors, Fresnel sheets, magnifying lenses, and eye loupes. Unwanted distance spectacles (negative meniscus lenses) are available at second-hand stores. Galileo telescopes, "long” 17th century telescopes, and useful demonstration models of Newtonian reflectors can be made with "dollar” optics. The poster will illustrate practical information about "dollar optics” and telescopes: magnification, focal length, and "diopters” disassembling spectacles; creating cheap mounts for spectacle lenses; the importance of optical axes and alignment; eyepieces; and focusing. (A table would be useful with the poster to set out a hands-on display of "dollar optic” telescopes.) Educators, experimenters, and those concerned with astronomy outreach might be interested in this poster. Working with "dollar optics” requires facility with simple tools, interest in planning projects, patience, imagination, and the willingness to invest some time and effort. "Dollar optics” may help to foster creativity and hands-on enthusiasm - as did Galileo's work with simple lenses 400 years ago. "Oh! When will there be an end put to the new observations and discoveries of this admirable instrument?” - Galileo Galilei as quoted by Henry C. King, The History of the Telescope.

  12. "HUBBLE, the astronomer, the telescope, the results"

    CERN Multimedia

    CERN. Geneva

    2011-01-01

    The fundamental discoveries made by Edwin Hubble in the first quarter of the last century will be presented. The space telescope bearing his name will be introduced, as well as the strategy put in place by NASA and the European Space Agency for its operation and its maintenance on-orbit. The personal experience of the speaker having participated in two of five servicing mission will be exposed and illustrated by pictures taken on-orbit. Finally, the main results obtained by the orbital observatory will be presented, in particular the ones related to the large scale structure of the Universe and its early history

  13. A polynomial-based trajectory generator for improved telescope control

    Science.gov (United States)

    Smith, David R.; Souccar, Kamal

    2008-08-01

    For any telescope, a fundamental performance requirement is the acquisition and tracking of the source. While this depends on many factors, the system accuracy is fundamentally limited by the servo tracking performance on the encoders. This tracking performance must be balanced with the need for large slewing motions to new sources. While the classical rate loop and position loop model permits basic operation, there has been increasing use through the years of gain scheduling or command pre-processors to improve telescope path planning and enable better performance. This is particularly important for telescopes that employ scanning or fast switching motions. As telescope control systems have moved to fully digital systems running at high update rates, more sophisticated approaches have become possible for telescope path planning. Taking advantage of the speed of available computation, we have developed a new real time trajectory generator that provides improved performance over previous implementations. Given a position command, the system generates a path to the desired end point. The resulting path is guaranteed to be continuous in position, velocity, and acceleration, as well as to respect specified limits in velocity, acceleration, and jerk. Significantly, the calculation provides not only the desired position over the interval, but also the velocity and acceleration, permitting their use in feedforward control to improve the tracking accuracy at all points on the path. The algorithm is presented, as well as some results with the system implemented on a real telescope.

  14. The Stability of Chandra Telescope Pointing and Spacial Resolution

    Science.gov (United States)

    Zhao, Ping

    2018-01-01

    Chandra X-ray Observatory revolutionized the X-ray astronomy as being the first, and so far the only, X-ray telescope achieving sub-arcsecond spacial resolution. Chandra is comprised of three principal elements: the High Resolution Mirror Assembly (HRMA), Pointing Control and Aspect Determination (PCAD) system, and the Science Instrument Module (SIM), which is where the X-ray detectors mounted and is connected to the HRMA by a 10-meter long Optical Bench Assembly. To achieve and retain the unprecedented imaging quality, it is critical that these three principal elements to stay rigid and stable for the entire life time of the Chandra operation. I will review the issues of telescope pointing stability, optical Axis, aimpoint and their impacts to the Chandra operation, and evaluate the integrity and stability of the telescope. I will show images taken from all four detectors since launch to demonstrate the quality and stability of the Chandra spacial resolution.

  15. The SPIRIT Telescope Initiative: Six Years On (Abstract)

    Science.gov (United States)

    Luckas, P.

    2017-12-01

    (Abstract only) Now in its sixth year of operation, the SPIRIT initiative remains unique in Australia, as a robust web-enabled robotic telescope initiative funded for education and outreach. With multiple modes of operation catering for a variety of usage scenarios and a fully supported education program, SPIRIT provides free access to contemporary astronomical tools for students and educators in Western Australia and beyond. The technical solution itself provides an excellent model for low cost robotic telescope installations, and the education program has evolved over time to include a broad range of student experiences - from engagement activities to authentic science. This paper details the robotic telescope solution, student interface, and educational philosophy, summarizes achievements and lessons learned, and examines the possibilities for future enhancement including spectroscopy.

  16. The ASTRI SST-2M telescope prototype for the Cherenkov Telescope Array: camera DAQ software architecture

    Science.gov (United States)

    Conforti, Vito; Trifoglio, Massimo; Bulgarelli, Andrea; Gianotti, Fulvio; Fioretti, Valentina; Tacchini, Alessandro; Zoli, Andrea; Malaguti, Giuseppe; Capalbi, Milvia; Catalano, Osvaldo

    2014-07-01

    ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) is a Flagship Project financed by the Italian Ministry of Education, University and Research, and led by INAF, the Italian National Institute of Astrophysics. Within this framework, INAF is currently developing an end-to-end prototype of a Small Size dual-mirror Telescope. In a second phase the ASTRI project foresees the installation of the first elements of the array at CTA southern site, a mini-array of 7 telescopes. The ASTRI Camera DAQ Software is aimed at the Camera data acquisition, storage and display during Camera development as well as during commissioning and operations on the ASTRI SST-2M telescope prototype that will operate at the INAF observing station located at Serra La Nave on the Mount Etna (Sicily). The Camera DAQ configuration and operations will be sequenced either through local operator commands or through remote commands received from the Instrument Controller System that commands and controls the Camera. The Camera DAQ software will acquire data packets through a direct one-way socket connection with the Camera Back End Electronics. In near real time, the data will be stored in both raw and FITS format. The DAQ Quick Look component will allow the operator to display in near real time the Camera data packets. We are developing the DAQ software adopting the iterative and incremental model in order to maximize the software reuse and to implement a system which is easily adaptable to changes. This contribution presents the Camera DAQ Software architecture with particular emphasis on its potential reuse for the ASTRI/CTA mini-array.

  17. Stray light field dependence for large astronomical space telescopes

    Science.gov (United States)

    Lightsey, Paul A.; Bowers, Charles W.

    2017-09-01

    aspect ratio of the tubular baffle length to PM diameter. Additional analysis has been done to examine the stray light implications for the fields near the image of a bright source. This near field stray light is shown to be dependent on the Bidirectional Reflectance Distribution Function (BRDF) characteristics of the mirrors in the optical train. The near field stray light contribution is dominated by those mirrors closer to the focal plane compared to the contributions from the PM and SM. Hence the near field stray light is independent of the exterior telescope baffle geometry. Contributions from self-emission from the telescope have been compared to natural background for telescopes operating at infrared wavelengths.

  18. Contamination Control Considerations for the Next Generation Space Telescope (NGST)

    Science.gov (United States)

    Wooldridge, Eve M.

    1998-01-01

    The NASA Space Science Program, in its ongoing mission to study the universe, has begun planning for a telescope that will carry on the Hubble Space Telescope's exploration. This telescope, the 'Next Generation Space Telescope' (NGST), will be 6-8 meters in diameter, will be radiatively cooled to 30-60 Kelvin in order to enable extremely deep exposures at near infrared wavelengths, and will operate for a lifetime of 5-10 years. The requirement will be to measure wavelengths from 1-5 microns, with a goal to measure wavelengths from 0.6-30 microns. As such, NGST will present a new contamination control challenge. The Goddard Space Flight Center (GSFC) performed one of three preliminary feasibility studies for the NGST, presenting a telescope with an 8 meter, deployable primary mirror and a deployable secondary mirror. The telescope would be radiatively cooled, with the optical telescope assembly (OTA) and the science instrument module (SIM) isolated from the warmer spacecraft support module (SSM). The OTA and the SIM would also be shielded from sunlight with an enormous, inflatable sun-shield. The GSFC telescope was designed for launch on an Atlas HAS, which would require launching the telescope in a stowed configuration, with the SSM, antennae, sun-shield, primary mirror 'petals', and secondary mirror deployed once on-orbit. The launch configuration and deployment scenario of an exposed telescope measuring near infrared and cooled to 30-60 K are the factors presenting contamination hazards to the NGST mission. Preliminary science requirements established are: less than 20% reflectance decrease on optical surfaces over the wavelength range, and less than 0.3% obscuration of optical surfaces. In order to meet these requirements, NGST must be built and launched with careful attention to contamination control. Initial contamination control design options include strict selecting of materials and baking out of hardware down to the component level, minimizing or

  19. Neutral Buoyancy Simulator- NB38 -Space Telescope

    Science.gov (United States)

    1980-01-01

    The Hubble Space Telescope (HST) is a cooperative program of the European Space Agency (ESA) and the National Aeronautical and Space Administration (NASA) to operate a long-lived space-based observatory. It was the flagship mission of NASA's Great Observatories program. The HST program began as an astronomical dream in the 1940s. During the 1970s and 1980s, the HST was finally designed and built becoming operational in the 1990s. The HST was deployed into a low-Earth orbit on April 25, 1990 from the cargo bay of the Space Shuttle Discovery (STS-31). The design of the HST took into consideration its length of service and the necessity of repairs and equipment replacement by making the body modular. In doing so, subsequent shuttle missions could recover the HST, replace faulty or obsolete parts and be re-released. Pictured is MSFC's Neutral Buoyancy Simulator (NBS) that served as the test center for shuttle astronauts training for Hubble related missions. Shown are astronauts Bruce McCandless and Sharnon Lucid being fitted for their space suits prior to entering the NBS to begin training on the space telescope axial scientific instrument changeout.

  20. Time-dependent search for neutrino emission from X-ray binaries with the ANTARES telescope

    NARCIS (Netherlands)

    Albert, A.; André, M.; Anton, G.; Ardid, M.; Aubert, J.-J.; Avgitas, T.; Baret, B.; Barrios-Martí, J.; Basa, S.; Bertin, V.; Biagi, S.; Bormuth, R.; Bouwhuis, M.C.; Bruijn, R.; Brunner, J.; Busto, J.; Capone, A.; Caramete, L.; Carr, J.; Celli, S.; Chiarusi, T.; Circella, M.; Coleiro, A.; Coniglione, R.; Costantini, H.; Coyle, P.; Creusot, A.; Deschamps, A.; De Bonis, G.; Distefano, C.; Di Palma, I.; Donzaud, C.; Dornic, D.; Drouhin, D.; Eberl, T.; El Bojaddaini, I.; Elsässer, D.; Enzenhöfer, A.; Felis, I.; Fusco, L.A.; Galatà, S.; Gay, P.; Geißelsöder, S.; Geyer, K.; Giordano, V.; Gleixner, A.; Glotin, H.; Gracia-Ruiz, R.; Graf, K.; Hallmann, S.; van Haren, H.; Heijboer, A.J.; Hello, Y.; Hernández-Rey, J.J.; Hößl, J.; Hofestädt, J.; Hugon, C.; Illuminati, G.; James, C.W.; de Jong, M.; Jongen, M.; Kadler, M.; Kalekin, O.; Katz, U.; Kießling, D.; Kouchner, A.; Kreter, M.; Kreykenbohm, I.; Kulikovskiy, V.; Lachaud, C.; Lahmann, R.; Lefèvre, D.; Leonora, E.; Loucatos, S.; Marcelin, M.; Margiotta, A.; Marinelli, A.; Martínez-Mora, J.A.; Mathieu, A.; Melis, K.; Michael, T.; Migliozzi, P.; Moussa, A.; Mueller, C.; Nezri, E.; Pavalas, G.E.; Pellegrino, C.; Perrina, C.; Piattelli, P.; Popa, V.; Pradier, T.; Racca, C.; Riccobene, G.; Roensch, K.; Saldaña, M.; Samtleben, D.F.E.; Sánchez-Losa, A.; Sanguineti, M.; Sapienza, P.; Schnabel, J.; Schüssler, F.; Seitz, T.; Sieger, C.; Spurio, M.; Stolarczyk, T.; Taiuti, M.; Trovato, A.; Tselengidou, M.; Turpin, D.; Tönnis, C.; Vallage, B.; Vallée, C.; Van Elewyck, V.; Vivolo, D.; Wagner, S.; Wilms, J.; Zornoza, J.D.; Zúñiga, J.

    2017-01-01

    ANTARES is currently the largest neutrino telescope operating in the NorthernHemisphere, aiming at the detection of high-energy neutrinos from astrophysical sources.Neutrino telescopes constantly monitor at least one complete hemisphere of the sky, and arethus well-suited to detect neutrinos

  1. The engineering prototype of the wide-field Cherenkov telescope for the Yakutsk array

    Science.gov (United States)

    Ivanov, A. A.; Knurenko, S. P.; Krasilnikov, A. D.; Ksenofontov, I. V.; Petrov, Z. E.; Pravdin, M. I.; Timofeev, L. V.; Sleptsov, I. Ye

    2013-02-01

    The Yakutsk array group is developing the wide FOV Cherenkov telescopes to be operated in coincidence with the surface detectors of the array under modernization. Currently the engineering prototype of the reflecting telescope with front-end electronics is designed and assembled to prove the feasibility of the concept. In this report the status and parameters of the engineering prototype are presented.

  2. The nuclear spectroscopic telescope array (NuSTAR) high-energy X-ray mission

    DEFF Research Database (Denmark)

    Madsen, Kristin K.; Harrison, Fiona A.; Hongjun An

    2014-01-01

    The Nuclear Spectroscopic Telescope Array (NuSTAR) mission was launched on 2012 June 13 and is the first focusing high-energy X-ray telescope in orbit operating above ~10 keV. NuSTAR flies two co-aligned Wolter-I conical approximation X-ray optics, coated with Pt/C and W/Si multilayers...

  3. VISTA: Pioneering New Survey Telescope Starts Work

    Science.gov (United States)

    2009-12-01

    A new telescope - VISTA (the Visible and Infrared Survey Telescope for Astronomy) - has just started work at ESO's Paranal Observatory and has made its first release of pictures. VISTA is a survey telescope working at infrared wavelengths and is the world's largest telescope dedicated to mapping the sky. Its large mirror, wide field of view and very sensitive detectors will reveal a completely new view of the southern sky. Spectacular new images of the Flame Nebula, the centre of our Milky Way galaxy and the Fornax Galaxy Cluster show that it is working extremely well. VISTA is the latest telescope to be added to ESO's Paranal Observatory in the Atacama Desert of northern Chile. It is housed on the peak adjacent to the one hosting the ESO Very Large Telescope (VLT) and shares the same exceptional observing conditions. VISTA's main mirror is 4.1 metres across and is the most highly curved mirror of this size and quality ever made - its deviations from a perfect surface are less than a few thousandths of the thickness of a human hair - and its construction and polishing presented formidable challenges. VISTA was conceived and developed by a consortium of 18 universities in the United Kingdom [1] led by Queen Mary, University of London and became an in-kind contribution to ESO as part of the UK's accession agreement. The telescope design and construction were project-managed by the Science and Technology Facilities Council's UK Astronomy Technology Centre (STFC, UK ATC). Provisional acceptance of VISTA was formally granted by ESO at a ceremony at ESO's Headquarters in Garching, Germany, attended by representatives of Queen Mary, University of London and STFC, on 10 December 2009 and the telescope will now be operated by ESO. "VISTA is a unique addition to ESO's observatory on Cerro Paranal. It will play a pioneering role in surveying the southern sky at infrared wavelengths and will find many interesting targets for further study by the Very Large Telescope, ALMA and

  4. Optical Studies of Space Debris at GEO: Survey and Follow-up with Two Telescopes

    Science.gov (United States)

    Seitzer, P.; Abercomby, K. J.; Rodriquez, H. M.; Barker, E. S.

    2007-01-01

    For 14 nights in March 2007, we used two telescopes at the Cerro Tololo Inter-American Observatory (CTIO) in Chile to study the nature of space debris at Geosynchronous Earth Orbit (GEO). In this project one telescope was dedicated to survey operations, while a second telescope was used for follow-up observations for orbits and colors. The goal was to obtain orbital and photometric information on every faint object found with the survey telescope. Thus we concentrate on objects fainter than R = 15th magnitude.

  5. Metrology for Trending Alignment of the James Webb Space Telescope Before and After Ambient Environmental Testing

    Science.gov (United States)

    Hadjimichael, Theo; Ohl, Raymond G.; Berrier, Joshua; Gum, Jeffery; Hayden, Joseph; Khreishi, Manal; McLean, Kyle; Redman, Kevin; Sullivan, Joseph; Wenzel, Greg; hide

    2017-01-01

    NASA's James Webb Space Telescope (JWST) is a 6.6m diameter, segmented, deployable telescope for cryogenic IR space astronomy. The JWST Observatory architecture includes the Optical Telescope Element (OTE) and the Integrated Science Instrument Module (ISIM) element which contains four science instruments (SIs). Prior to integration with the spacecraft, theJWST optical assembly is put through rigorous launch condition environmental testing. This work reports on the metrology operations conducted to determine any changes in subassembly alignment, including primary mirror segments with respect to each other, the secondary mirror to its support structure, the tertiary mirror assembly to the backplane of the telescope and ultimately to the ISIM.

  6. Use of requirements engineering within the Thirty Meter Telescope project

    Science.gov (United States)

    Rogers, John; Thompson, Hugh

    2010-07-01

    The Thirty Meter Telescope is comprised of thirty five individual sub-systems which include optical systems, instruments, adaptive optics systems, controls, mechanical systems, supporting software and hardware and the infrastructure required to support their operation. These thirty five sub-systems must operate together as a system to enable the telescope to meet the science cases for which it is being developed. These science cases are formalized and expressed as science requirements by the project's Science Advisory Committee. From these, a top down requirements engineering approach is used within the project to derive consistent operational, architectural and ultimately detailed design requirements for the sub-systems. The various layers of requirements are stored within a DOORS requirements database that also records the links between requirements, requirement rationale and requirement history. This paper describes the development of the design requirements from science cases, the reasons for recording the links between requirements and the benefits that documenting this traceability will yield during the design and verification of the telescope. Examples are given of particular science cases, the resulting operational and engineering requirements on the telescope system and how individual sub-systems will contribute to these being met.

  7. The SOAR Telescope Project Southern Observatory for Astronomical Research (SOAR)

    National Research Council Canada - National Science Library

    Evans, Charles

    2003-01-01

    ... is a 4.2-meter aperture telescope employing state-of-the-art technologies to deliver high-resolution images, which are limited only by the excellent seeing conditions of its site on Cerro Pachon in northern Chile. It is designed to operate from the near-ultraviolet through the.

  8. The SONG prototype: Efficiency of a robotic telescope

    DEFF Research Database (Denmark)

    Andersen, M. F.; Grundahl, F.; Beck, A. H.

    2016-01-01

    The Stellar Observations Network Group prototype telescope at the Teide Observatory has been operating in scientific mode since March 2014. The first year of observations has entirely been carried out using the high resolution echelle spectrograph. Several asteroseismic targets were selected for ...

  9. Trick or Treat and Telescopes

    Science.gov (United States)

    Buratti, Bonnie J.; Meinke, Bonnie K.; Schmude, Richard W.

    2017-10-01

    Based on an activity that DPS member Richard Schmude Jr. has been doing for years, with over 5000 children reached, DPS initiated in 2016 a pilot program entitled “Trick-or-Treat and Telescopes.” DPS encouraged its members to put out their telescopes during trick-or-treat time on Halloween, in their own lawns or in a neighbor’s lawn with better viewing (or more traffic). The program will be continued in 2017. This year should offer good viewing with a waxing gibbous moon and Saturn visible. The program was also advertised though the Night Sky Network, a consortium of astronomy clubs. The following website gives advice and connections to resources.https://dps.aas.org/education/trick-or-treat-and-telescopes acknowledged.

  10. LISA telescope spacer design investigations

    Science.gov (United States)

    Sanjuan, Josep; Mueller, Guido; Livas, Jeffrey; Preston, Alix; Arsenovic, Petar; Castellucci, Kevin; Generie, Joseph; Howard, Joseph; Stebbins, Robin

    The Laser Interferometer Space Antenna (LISA) is a space-based gravitational wave observa-tory with the goal of observing Gravitational Waves (GWs) from astronomical sources in a frequency range from 30 µHz to 0.1 Hz. The detection of GWs at such low frequency requires measurements of distances at the pico-meter level between bodies separated by 5 million kilo-meters. The LISA mission consists of three identical spacecraft (SC) separated by 5 × 106 km forming an equilateral triangle. Each SC contains two optical assemblies and two vacuum en-closures housing one proof mass (PM) in geodesic (free fall) motion each. The two assemblies on one SC are each pointing towards an identical assembly on each of the other two SC to form a non-equal arm interferometer. The measurement of the GW strain is done by measuring the change in the length of the optical path between the PMs of one arm relative to the other arms caused by the pass of a GW. An important element of the Interferometric Measurement System (IMS) is the telescope which, on one hand, gathers the light coming from the far SC (˜100 pW) and, on the other hand, expands and collimates the small outgoing beam ( 1 W) and sends it to the far SC. Due to the very demanding sensitivity requirements care must be taken in the design and validation of the telescope not to degrade the IMS performance. For instance, the diameter of the telescope sets the the shot noise of the IMS and depends critically on the diameter of the primary and the divergence angle of the outgoing beam. As the telescope is rather fast telescope, the divergence angle is a critical function of the overall separation between the primary and secondary. Any long term changes of the distance of more than a a few micro-meter would be detrimental to the LISA mission. Similarly challenging are the requirements on the in-band path-length noise for the telescope which has to be kept below 1 pm Hz-1/2 in the LISA band. Different configurations (on-axis/off axis

  11. The Large Space Telescope program.

    Science.gov (United States)

    O'Dell, C. R.

    1972-01-01

    The 1980's should see the establishment of the first major observatory in space. This observatory will contain a long-lifetime reflecting telescope of about 120 inches clear aperture. Advantages of an orbiting telescope include the elimination of astronomical seeing effects and improvements in resolving power. The small images and darker sky will permit low-dispersion spectrographs to avoid more of the contaminating background. The crispness of the images also has potential for very efficient high-dispersion spectroscopy. A further advantage lies in the accessibility of all the sky and nearly around-the-clock observing.

  12. Superconductor lunar telescopes --Abstract only

    Science.gov (United States)

    Chen, P. C.; Pitts, R.; Shore, S.; Oliversen, R.; Stolarik, J.; Segal, K.; Hojaji, H.

    1994-01-01

    We propose a new type of telescope designed specifically for the lunar environment of high vacuum and low temperature. Large area UV-Visible-IR telescope arrays can be built with ultra-light-weight replica optics. High T(sub c) superconductors provide support, steering, and positioning. Advantages of this approach are light-weight payload compatible with existing launch vehicles, configurable large area optical arrays, no excavation or heavy construction, and frictionless electronically controlled mechanisms. We have built a prototype and will be demonstarting some of its working characteristics.

  13. Education and outreach using the falcon telescope network

    Science.gov (United States)

    Gresham, Kimberlee C.; Palma, Christopher; Polsgrove, Daniel E.; Chun, Francis K.; Della-Rose, Devin J.; Tippets, Roger D.

    2016-12-01

    The Falcon Telescope Network (FTN) is a global network of small aperture telescopes developed by the Center for Space Situational Awareness Research in the Department of Physics at the United States Air Force Academy (USAFA). Consisting of commercially available equipment, the FTN is a collaborative effort between USAFA and other educational institutions ranging from two- and four-year colleges to major research universities. USAFA provides the equipment (e.g. telescope, mount, camera, filter wheel, dome, weather station, computers and storage devices) while the educational partners provide the building and infrastructure to support an observatory. The user base includes USAFA along with K-12 and higher education faculty and students. The diversity of the users implies a wide variety of observing interests, and thus the FTN collects images on diverse objects, including satellites, galactic and extragalactic objects, and objects popular for education and public outreach. The raw imagery, all in the public domain, will be accessible to FTN partners and will be archived at USAFA. Currently, there are five Falcon telescopes installed, two in Colorado and one each in Pennsylvania, Chile, and Australia. These five telescopes are in various stages of operational capability but all are remotely operable via a remote desktop application. The FTN team has conducted STEM First Light Projects for three of the U.S. observatories, soliciting proposals from middle and high school students and teachers that suggest and then become what is observed as official STEM first-light objects. Students and teachers learn how to write and submit a proposal as well as how telescopes operate and take data, while university-level students at the U.S. Air Force Academy and The Pennsylvania State University learn how to evaluate proposals and provide feedback to the middle and high school students and teachers. In this paper, we present the current status of the FTN, details of and lessons

  14. Atmospheric Monitoring at the Site of the MAGIC Telescopes

    Directory of Open Access Journals (Sweden)

    Will Martin

    2017-01-01

    Full Text Available The MAGIC telescopes in La Palma, Canary Islands, measure the Cherenkov light emitted by gamma ray-induced extended air showers in the atmosphere. The good knowledge of the atmospheric parameters is important, both for the correct and safe operations of the telescopes, but also for subsequent data analysis. A weather station measures the state variables of the atmosphere, temperature, humidity and wind, an elastic Lidar system and an infrared pyrometer determine the optical transmission of the atmosphere. Using an AllSky camera, the cloud cover can be estimated. The measured values are completed by data from global atmospheric models based on numeric weather forecasts.

  15. Performance of the second MEMS space telescope for observation of extreme lightning from space

    Science.gov (United States)

    Jeon, Jin-A.; Lee, Hye Young; Kim, Ji Eun; Lee, Jik; Park, Il H.

    2016-03-01

    A small space-telescope equipped with a micro-electro-mechanical system (MEMS) micro-mirror is applied to space missions for observing random, rare and temporal events like transient luminous events (TLEs). The measurement of TLEs with fine time resolution will show the different temporal profiles predicted by the various models for sprites, blue jets, elves and halos. The proposed space-telescope consists of three components: two sub-telescopes with different focal lengths and a spectrometer. The trigger telescope with a short focal length surveys a wide field of view. The zoom-in telescope with a long focal length looks into a small field of view area that is part of the trigger telescope's wide field of view. Upon identifying a candidate TLE, the trigger telescope determines the location of the event and provides the location to the MEMS micro-mirror. Then, the micro-mirror, which is placed as a pinhole in front of the zoom-in telescope, rotates its mirror plane by such an angle that the zoom-in telescope will watch the small field of view around the center of the event. In this manner, the zoom-in telescope achieves the zoom-in designed by its long focal length. The first such small-space telescope, the MEMS Telescope for Extreme Lightning (MTEL), was launched into space in 2009 and identified a few candidates sprites. However a power failure (over-charge of the solar battery) of the main satellite occurred, and the MTEL was not able to continue space operation to acquire sizable statistics for TLE events. We developed and constructed the second small-space telescope, called MTEL-II, to continue to observe TLE events in space. In this paper, we present the performance of MTEL-II based on ground tests.

  16. The next generation Cherenkov Telescope Array observatory: CTA

    Energy Technology Data Exchange (ETDEWEB)

    Vercellone, S., E-mail: stefano@ifc.inaf.it

    2014-12-01

    The Cherenkov Telescope Array (CTA) is a large collaborative effort aimed at the design and operation of an observatory dedicated to the very high-energy gamma-ray astrophysics in the energy range 30 GeV–100 TeV, which will improve by about one order of magnitude the sensitivity with respect to the current major arrays (H.E.S.S., MAGIC, and VERITAS). In order to achieve such improved performance, for both the northern and southern CTA sites, four units of 23 m diameter Large Size Telescopes (LSTs) will be deployed close to the centre of the array with telescopes separated by about 100 m. A larger number (about 25 units) of 12 m Medium Size Telescopes (MSTs, separated by about 150 m), will cover a larger area. The southern site will also include up to 24 Schwarzschild–Couder dual-mirror medium-size Telescopes (SCTs) with the primary mirror diameter of 9.5 m. Above a few TeV, the Cherenkov light intensity is such that showers can be detected even well outside the light pool by telescopes significantly smaller than the MSTs. To achieve the required sensitivity at high energies, a huge area on the ground needs to be covered by Small Size Telescopes (SSTs) with a field of view of about 10° and an angular resolution of about 0.2°, making the dual-mirror configuration very effective. The SST sub-array will be composed of 50–70 telescopes with a mirror area of about 5–10 m{sup 2} and about 300 m spacing, distributed across an area of about 10 km{sup 2}. In this presentation we will focus on the innovative solution for the optical design of the medium and small size telescopes based on a dual-mirror configuration. This layout will allow us to reduce the dimension and the weight of the camera at the focal plane of the telescope, to adopt Silicon-based photo-multipliers as light detectors thanks to the reduced plate-scale, and to have an optimal imaging resolution on a wide field of view.

  17. The origins of the telescope

    NARCIS (Netherlands)

    van Helden, A.|info:eu-repo/dai/nl/072210524; Dupré, S.|info:eu-repo/dai/nl/23478055X; van Gent, R.; Zuidervaart, H.J.

    2011-01-01

    The origins of the telescope have been debated since the instrument’s appearance in the Hague in 1608. Civic and national pride has led local dignitaries, popular writers, and scholars to present sharply divergent histories over the years, crediting a variety of people and places with the invention.

  18. Monster telescope hunts blue planets

    CERN Multimedia

    Leake, J

    2003-01-01

    BRITAIN is to back a project to build the world's biggest telescope - so powerful that it could see life-bearing planets in other solar systems. It will need the largest mirror ever built at about 100 metres in diameter (1/2 page).

  19. Overdenture dengan Pegangan Telescopic Crown

    Directory of Open Access Journals (Sweden)

    Pambudi Santoso

    2014-06-01

    Full Text Available Kaitan presisi merupakan alat retensi mekanis yang menghubungkan antara satu atau lebih pegangan gigi tiruan, yang bertujuan untuk menambah retensi dan/atau stabilisasi. Kaitan presisi dapat digunakan secara luas pada gigi tiruan cekat, gigi tiruan sebagian lepasan, overdenture, implant untuk retensi overdenture, dan protesa maksilo fasial. Overdenture dengan kaitan presisi dapat membantu dalam pembagian beban kunyah, meminimalkan trauma pada gigi pegangan dan jaringan lunak, meminimalkan resorbsi tulang, dan meningkatkan estetik dan pengucapan suara. Salah satu jenis dari kaitan presisi adalah telescopic crown, terdiri dari 2 macam mahkota, yaitu mahkota primer yang melekat secara permanen pada gigi penyangga, dan mahkota sekunder yang melekat pada gigi tiruan. Tujuan pemaparan kasus ini adalah untuk memberikan informasi tentang rehabilitasi pasien edentulous sebagian rahang atas dengan telescopic crown..  Pasien wanita berusia 45 tahun datang ke klinik prostodonsia RSGM Prof.Soedomo dengan keluhan ingin dibuatkan gigi tiruan. Pasien kehilangan gigi 11 12 15 16 17 21 22 24 25 26 dan 27 yang diindikasikan untuk pembuatan overdenture gigi tiruan sebagian lepasan (GTS kerangka logam dengan pegangan telescopic crown pada gigi 13 dan 14 dengan sistem parallel-sided crown. Tahap-tahap pembuatan telescopic crown yaitu mencetak model study dengan catatan gigit pendahuluan. Perawatan saluran dilakukan pada akar gigi 13, dilanjutkan pemasangan pasak fiber serta rewalling dinding bukal. Gigi 13 dan 14 dilakukan preparasi mahkota penuh, dilanjutkan dengan pencetakan model kerja untuk coping primer dan kerangka logam dengan metode double impression. Coping primer disementasi pada gigi penyangga, dilanjutkan pasang coba coping sekunder beserta kerangka logam. Selanjutnya dilakukan pencatatan gigit, pencetakan model kerja, penyusunan gigi dan pasang coba penyusunan gigi pada pasien. Prosedur dilanjutkan dengan proses di laboratorium, serta insersi pada

  20. Spaceborne telescopes on a budget: paradigms for producing high-reliability telescopes, scanners, and EO assemblies using heritage building blocks

    Science.gov (United States)

    Hull, Tony; Schwalm, Mark

    2011-06-01

    By starting with established and flown hardware (high Technology Readiness Level (TRL)), and implementing a concurrent engineering environment and seamless team, a mission architect can achieve high reliability and high performance while operating under constrained cost and short implementation schedule. We will describe methods, including those used by the telescope team on the recent Wide-field Infrared Survey Explorer (WISE) mission, to manage cost and realize aggressive schedules. These lessons may be evoked for telescopes addressing defense, security and sensing, as well as those for NASA science.

  1. Disassembling and reintegration of large telescope primary mirror

    Science.gov (United States)

    Xu, Qi-rui; Fan, Bin; Zhang, Ming

    2014-09-01

    The success of the large telescope is largely linked to the excellent performance and reliability of the primary mirror. In order to maintain the quality of its reflective surface at the high expectations of astronomers, the primary mirror after almost two or three years of astronomical observations, needs to be removed and reinstalled for its cleaning and re-coating operation. There are a series of procedures such as the primary mirror cell dissembling from telescope, mirror handling, transportation, reintegration, alignment and so on. This paper will describe the experiences of disassembling and reintegration of large telescope primary mirror, taking a two meter grade primary mirror for example. As with all advanced and complex opto-mechanical systems, there has been the usual problems and trouble shooting.

  2. NEAT: A Microarcsec Astrometric Telescope

    Science.gov (United States)

    Shao, M.; Nemati, B.; Zhai, C.; Goullioud, R.

    2011-01-01

    NEAT, Nearby Exo-Earth Astrometric Telescope is a medium-small telescope (is) approximately 1m in diameter that is designed to make ultra precise (is) less than 1 uas (microarcsec) astrometric measurements of nearby stars in a (is) approximately 1hr observation. Four major error sources prevent normal space telescopes from obtaining accuracies close to 1 uas. Even with a small 1m telescope, photon noise is usually not a problem for the bright nearby target stars. But in general, the reference stars are much fainter. Typically a field of view of (is) approximately 0.5 deg dia is needed to obtain enough bright reference stars. The NEAT concept uses a very simple but unusual design to avoid optically induced astrometric errors. The third source of error is the accuracy and stability of the focal plane. A 1uas error over a (is) approximately 2000 arcsec field of view implies the focal plane is accurate or at least stable to 5 parts in 10(exp 10) over the lifetime of the mission ( (is) approximately 5yrs). The 4th class of error has to do with our knowledge of the PSF and how that PSF is sampled by an imperfect detector. A Nyquist sampled focal plane would have (is) greater than 2 pixels per lambda/D, and centroiding to 1uas means centroiding to 10-5 pixels. This paper describes the mission concept, and an overview of the technology needed to perform 1uas astrometry with a small telescope, and how we overcome problems 1 and 2. A companion paper will describe the technical progress we've made in solving problems 3 and 4.

  3. Las Cumbres Observatory 1-Meter Global Science Telescope Network

    Science.gov (United States)

    Pickles, Andrew; Dubberley, M.; Haldeman, B.; Haynes, R.; Posner, V.; Rosing, W.; staff, LCOGT

    2009-05-01

    We present the optical, mechanical and electronic design of the LCOGT 1-m telescope. These telescopes are planned to go in pairs to each of 6 sites worldwide, complementing 0.4m telescopes and 2-m telescopes at two existing sites. This science network is designed to provide continuously available photometric monitoring and spectroscopy of variable sources. The 1-m optical design is an f/8 quasi-RC system, with a doublet corrector and field flattener to provide good image quality out to 0.8 degrees. The field of view of the Fairchild 4K science CCD is 27 arcmin, with 0.39 arcsec pixels. The mechanical design includes a stiff C-ring equatorial mount and friction drive rollers, mounted on a triangular base that can be adjusted for latitude. Another friction drive is coupled at the Declination axis to the M1 mirror cell, that forms the main Optical Tube Assembly (OTA) structural element. The OTA design includes a stiff carbon fiber truss assembly, with offset vanes to an M2 drive that provides remote focus, tilt and collimation. The tube assembly weighs about 600 Kg, including Hextek mirrors, 4K science CCD, filter wheel, autoguiders and medium resolution spectrograph pick-off fiber. The telescopes will be housed in domes at existing observatory sites. They are designed to operate remotely and reliably under centralized control for automatic, optimized scheduling of observations with available hardware.

  4. Remote observing with the Nickel Telescope at Lick Observatory

    Science.gov (United States)

    Grigsby, Bryant; Chloros, Konstantinos; Gates, John; Deich, William T. S.; Gates, Elinor; Kibrick, Robert

    2008-07-01

    We describe a project to enable remote observing on the Nickel 1-meter Telescope at Lick Observatory. The purpose was to increase the subscription rate and create more economical means for graduate- and undergraduate students to observe with this telescope. The Nickel Telescope resides in a 125 year old dome on Mount Hamilton. Remote observers may work from any of the University of California (UC) remote observing facilities that have been created to support remote work at both Keck Observatory and Lick Observatory. The project included hardware and software upgrades to enable computer control of all equipment that must be operated by the astronomer; a remote observing architecture that is closely modeled on UCO/Lick's work to implement remote observing between UC campuses and Keck Observatory; new policies to ensure safety of Observatory staff and equipment, while ensuring that the telescope subsystems would be suitably configured for remote use; and new software to enforce the safety-related policies. The results increased the subscription rate from a few nights per month to nearly full subscription, and has spurred the installation of remote observing sites at more UC campuses. Thanks to the increased automation and computer control, local observing has also benefitted and is more efficient. Remote observing is now being implemented for the Shane 3- meter telescope.

  5. The reflective surface of the MAGIC telescope

    Science.gov (United States)

    Doro, M.; Bastieri, D.; Biland, A.; Dazzi, F.; Font, L.; Garczarczyk, M.; Ghigo, M.; Giro, E.; Goebel, F.; Kosyra, R.; Lorenz, E.; Mariotti, M.; Mirzoyan, R.; Peruzzo, L.; Pareschi, G.; Zapatero, J.

    2008-09-01

    The atmospheric Cherenkov telescope MAGIC for ground-based gamma-ray astronomy is operating since late 2003 on the Canary island of La Palma. Its 17 m diameter mirror is composed of 964 square all-aluminum mirrors of ˜0.5m side, making up a parabola of 236 m2 area. Each mirror is composed of a sandwich of two thin aluminum layers interspaced by a honeycomb structure that ensures rigidity, high temperature conductivity and low weight. The surface of each raw blank is diamond milled to provide high reflectivity and a slightly different focal length to fit the overall parabolic shape of the reflector. We report about the stability and performance of the surface exposed to the atmosphere for over 3 years. For the construction of the clone of the first telescope, dubbed MAGIC II, major improvements of the design and performance of the reflective surface were required. Given the good experience with aluminum mirrors, a similar assembly was tested, but the area was increased to 1 m2, which allowed to skip the inter-alignment of four mirrors within a panel and to reduce substantially the weight. The increased rigidity of the mirror unit resulted in an improved focussing quality. In addition, a second class of mirrors will be installed in the outermost part of the reflector, namely glass mirrors obtained by cold-slumping replica technique. Details on the construction of both type MAGIC II new mirrors and the 17 m reflector will be presented.

  6. Using ISS to develop telescope technology

    Science.gov (United States)

    Saenz-Otero, Alvar; Miller, David W.

    2005-08-01

    Future space telescope missions concepts have introduced new technologies such as precision formation flight, optical metrology, and segmented mirrors. These new technologies require demonstration and validation prior to deployment in final missions such as the James Webb Space Telescope, Terrestrial Planet Finder, and Darwin. Ground based demonstrations do not provide the precision necessary to obtain a high level of confidence in the technology; precursor free flyer space missions suffer from the same problems as the final missions. Therefore, this paper proposes the use of the International Space Station as an intermediate research environment where these technologies can be developed, demonstrated, and validated. The ISS provides special resources, such as human presence, communications, power, and a benign atmosphere which directly reduce the major challenges of space technology maturation: risk, complexity, cost, remote operations, and visibility. Successful design of experiments for use aboard the space station, by enabling iterative research and supporting multiple scientists, can further reduce the effects of these challenges of space technology maturation. This paper presents results of five previous MIT Space Systems Laboratory experiments aboard the Space Shuttle, MIR, and the ISS to illustrate successful technology maturation aboard these facilities.

  7. Data analysis challenges for the Einstein Telescope

    Science.gov (United States)

    Bosi, Leone; Porter, Edward K.

    2011-02-01

    The Einstein Telescope is a proposed third generation gravitational wave detector that will operate in the region of 1 Hz to a few kHz. As well as the inspiral of compact binaries composed of neutron stars or black holes, the lower frequency cut-off of the detector will open the window to a number of new sources. These will include the end stage of inspirals, plus merger and ringdown of intermediate mass black holes, where the masses of the component bodies are on the order of a few hundred solar masses. There is also the possibility of observing intermediate mass ratio inspirals, where a stellar mass compact object inspirals into a black hole which is a few hundred to a few thousand times more massive. In this article, we investigate some of the data analysis challenges for the Einstein Telescope such as the effects of increased source number, the need for more accurate waveform models and the some of the computational issues that a data analysis strategy might face.

  8. The X-ray Telescope of CAST

    CERN Document Server

    Kuster, M.; Cebrian, S.; Davenport, M.; Elefteriadis, C.; Englhauser, J.; Fischer, H.; Franz, J.; Friedrich, P.; Hartmann, R.; Heinsius, F.H.; Hoffmann, D.H.H.; Hoffmeister, G.; Joux, J.N.; Kang, D.; Konigsmann, Kay; Kotthaus, R.; Papaevangelou, T.; Lasseur, C.; Lippitsch, A.; Lutz, G.; Morales, J.; Rodriguez, A.; Struder, L.; Vogel, J.; Zioutas, K.

    2007-01-01

    The Cern Axion Solar Telescope (CAST) is in operation and taking data since 2003. The main objective of the CAST experiment is to search for a hypothetical pseudoscalar boson, the axion, which might be produced in the core of the sun. The basic physics process CAST is based on is the time inverted Primakoff effect, by which an axion can be converted into a detectable photon in an external electromagnetic field. The resulting X-ray photons are expected to be thermally distributed between 1 and 7 keV. The most sensitive detector system of CAST is a pn-CCD detector combined with a Wolter I type X-ray mirror system. With the X-ray telescope of CAST a background reduction of more than 2 orders off magnitude is achieved, such that for the first time the axion photon coupling constant g_agg can be probed beyond the best astrophysical constraints g_agg < 1 x 10^-10 GeV^-1.

  9. THEIA: Telescope for Habitable Exoplanets and Interstellar/Intergalactic Astronomy

    Science.gov (United States)

    Spergel, David N.; Kasdin, J.; Belikov, R.; Atcheson, P.; Beasley, M.; Calzetti, D.; Cameron, B.; Copi, C.; Desch, S.; Dressler, A.; Ebbets, D.; Egerman, R.; Fullerton, A.; Gallagher, J.; Green, J.; Guyon, O.; Heap, S.; Jansen, R.; Jenkins, E.; Kasting, J.; Keski-Kuha, R.; Kuchner, M.; Lee, R.; Lindler, D.; Linfield, R.; Lisman, D.; Lyon, R.; Malhotra, S.; Mathews, G.; McCaughrean, M.; Mentzel, J.; Mountain, M.; NIkzad, S.; O'Connell, R.; Oey, S.; Padgett, D.; Parvin, B.; Procashka, J.; Reeve, W.; Reid, I. N.; Rhoads, J.; Roberge, A.; Saif, B.; Scowen, P.; Seager, S.; Seigmund, O.; Sembach, K.; Shaklan, S.; Shull, M.; Soummer, R.

    2009-01-01

    By combining an occultor with a 4-meter optical/ultraviolet telescope, THEIA (Telescope for Habiatable Earths and Interstellar/Intergalactic Astronomy) will conduct an observational program that address many of the most exciting questions in astrophysics. The telescope is an on-axis telescope with a MgF-coated primary and a LiF-coated secondary. This hybrid approach allows reasonable through-put in the UV without the need to coat a large piimary with LiF. The coronagraph/occultor system is also a hybrid that aims to reduce the requirements on each approach. The telescope feeds a rich instrument complement. The eXtrasolar Planet Characterizer (XPC) baseline instruments are three narrow-field cameras for the UV (0.25-4.0 microns), blue (0.4-0.7 microns) and red (0.7-1.0 microns) with filters, and an integral field spectrograph (IFS) operating in the red. A wide-field high-resolution camera (Star Formation Camera) operating with a blue (190--517nm) and a red (517--1075nm) channel will conduct a comprehensive and systematic study of the astrophysical processes and environments relevant for the births and life cycles of stars and their planetary systems. A UV high-resolution spectrograph (UVS) with R=30,000-100,000 in the far-UV (1000-1700 A) and near-UV (1700-3000 A) will strengthen the foundations of observational cosmology by examining the cosmic web (IGM), its interactions with galaxies, and its enrichment with the products of stellar and galactic evolution. This mission has two basic opseration modes. While the occultor is moving from target star to target star, the telescope carries out an exciting program of general astrophysics. While the occultor is on target, it will characterize the key properties of a detected planet and deeply image adjacent fields in parallel mode.

  10. Art concept of the Hubble Space Telescope

    Science.gov (United States)

    1986-01-01

    Art concept of the Hubble Space Telescope in orbit above the earth with a Space Shuttle approaching and an astronaut performing an extravehicular activity (EVA) (30462); Art concept of the Hubble Space Telescope with the interior design exposed (30463).

  11. High resolution telescope including an array of elemental telescopes aligned along a common axis and supported on a space frame with a pivot at its geometric center

    Science.gov (United States)

    Norbert, Massie A.; Yale, Oster

    1992-01-01

    A large effective-aperture, low-cost optical telescope with diffraction-limited resolution enables ground-based observation of near-earth space objects. The telescope has a non-redundant, thinned-aperture array in a center-mount, single-structure space frame. It employes speckle interferometric imaging to achieve diffraction-limited resolution. The signal-to-noise ratio problem is mitigated by moving the wavelength of operation to the near-IR, and the image is sensed by a Silicon CCD. The steerable, single-structure array presents a constant pupil. The center-mount, radar-like mount enables low-earth orbit space objects to be tracked as well as increases stiffness of the space frame. In the preferred embodiment, the array has elemental telescopes with subaperture of 2.1 m in a circle-of-nine configuration. The telescope array has an effective aperture of 12 m which provides a diffraction-limited resolution of 0.02 arc seconds. Pathlength matching of the telescope array is maintained by a electro-optical system employing laser metrology. Speckle imaging relaxes pathlength matching tolerance by one order of magnitude as compared to phased arrays. Many features of the telescope contribute to substantial reduction in costs. These include eliminating the conventional protective dome and reducing on-site construction activities. The cost of the telescope scales with the first power of the aperture rather than its third power as in conventional telescopes.

  12. CFRP lightweight structures for extremely large telescopes

    DEFF Research Database (Denmark)

    Jessen, Niels Christian; Nørgaard-Nielsen, Hans Ulrik; Schroll, J.

    2008-01-01

    Telescope structures are traditionally built out of steel. To improve the possibility of realizing the ambitious extremely large telescopes, materials with a higher specific stiffness and a lower coefficient of thermal expansion are needed. An important possibility is Carbon Fibre Reinforced Plas...... Plastic (CFRP). The advantages of using CFRP for the secondary mirror support structure of the European overwhelmingly large telescope are discussed....

  13. The Hubble Space Telescope: Problems and Solutions.

    Science.gov (United States)

    Villard, Ray

    1990-01-01

    Presented is the best understanding of the flaw discovered in the optics of the Hubble Space Telescope and the possible solutions to the problems. The spherical aberration in the telescope's mirror and its effect on the quality of the telescope's imaging ability is discussed. (CW)

  14. The Principles of Astronomical Telescope Design

    CERN Document Server

    Cheng, Jingquan

    2009-01-01

    Presents a summary of the author's twenty five years of experience in telescope design. This work provides a general introduction to various aspects of telescope design. It discusses the theory behind telescope design. It covers Radio, Infrared, Optical, X-Ray and Gamma-Ray wavelengths

  15. Goddard Robotic Telescope - Optical Follow-up of GRBs and Coordinated Observations of AGNs

    Science.gov (United States)

    Sakamoto, T.; Wallace, C. A.; Donato, D.; Gehrels, N.; Okajima, T.; Ukwatta, T. N.

    2010-01-01

    Since it is not possible to predict when a Gamma-Ray Burst (GRB) will occur or when Active Galactic Nucleus (AGN) flaring activity starts, follow-up/monitoring ground telescopes must be located as uniformly as possible all over the world in order to collect data simultaneously with Fermi and Swift detections. However, there is a distinct gap in follow-up coverage of telescopes in the eastern U.S. region based on the operations of Swift. Motivated by this fact, we have constructed a 14" fully automated optical robotic telescope, Goddard Robotic Telescope (GRT), at the Goddard Geophysical and Astronomical Observatory. The aims of our robotic telescope are 1) to follow-up Swift/Fermi GRBs and 2) to perform the coordinated optical observations of Fermi Large Area Telescope (LAT) AGN. Our telescope system consists of off-the-shelf hardware. With the focal reducer, we are able to match the field of view of Swift narrow instruments (20' x 20'). We started scientific observations in mid-November 2008 and GRT has been fully remotely operated since August 2009. The 3(sigma) upper limit in a 30-second exposure in the R filter is approx.15.4 mag; however, we can reach to approx.18 mag in a 600-second exposures. Due to the weather condition at the telescope site. our observing efficiency is 30-40%, on average.

  16. Current status of the ANTARES neutrino telescope

    Energy Technology Data Exchange (ETDEWEB)

    Naumann-Godo, M. [Physics Institute 4, Erwin-Rommel-Str. 1, 91058 Erlangen (Germany)

    2007-10-15

    The ANTARES collaboration is currently installing a neutrino telescope in the Mediterranean Sea close to the French coast at Toulon. The complete detector will consist of 900 photomultipliers arranged on 12 detector lines in 2500 m depth, thus instrumenting a volume of 0.01 km{sup 3} sea water as target material. The incident neutrinos are detected by collecting the Cherenkov light from charged secondary particles, which are emitted by neutrino interactions with the sea water or the rock of the sea bed beneath. By reconstructing the Cherenkov cone and therewith the direction of the incident neutrinos with high accuracy, the principal objective of ANTARES is the search for point sources of high-energy cosmic neutrinos and dark matter. In this presentation, emphasis will be placed on the operation of the detector in the hostile deep sea environment and on the status of the project. Results of the first complete detector line will be shown.

  17. Diffractive X-ray Telescopes

    OpenAIRE

    Skinner, Gerald K

    2010-01-01

    Diffractive X-ray telescopes using zone plates, phase Fresnel lenses, or related optical elements have the potential to provide astronomers with true imaging capability with resolution several orders of magnitude better than available in any other waveband. Lenses that would be relatively easy to fabricate could have an angular resolution of the order of micro-arc-seconds or even better, that would allow, for example, imaging of the distorted space- time in the immediate vicinity of the super...

  18. Origins Space Telescope Concept 1: Mid to Far Infrared Mission

    Science.gov (United States)

    Carter, Ruth; DiPirro, Michael; Origins Space Telescope Decadal Mission Study Team

    2018-01-01

    Origins Space Telescope (OST), is a NASA large mission concept designed to investigate the mid to far infrared sky. It would launch in the mid 2030’s, with mission development and implementation beginning in the mid-2020’s. This poster presents the overall architecture of OST Mission Concept 1. The Concept 1 telescope has a 9-meter diameter off-axis primary mirror, a three-mirror astigmat with a field steering mirror, covering the wavelength range of 6 to 600 µm. Five science instruments are on board the OST observatory for spectroscopy, imaging and coronagraphy. The instruments are the Medium Resolution Survey Spectrometer (MRSS), High Resolution Spectrometer (HRS), Far –IR Imaging and Polarimeter (FIP), Mid-IR Imaging Spectrometer and Coronagraph (MISC) and Heterodyne Instrument (HERO). The instruments are housed in the Instrument Accommodation Module (IAM). The Telescope and IAM are actively cooled to 4 Kelvin by relative high maturity 4 K cryocoolers To limit the Sun, Earth, Moon, and Spacecraft thermal radiation into the 4 K environment, multiple layers of sun shields similar to those used on JWST, are implemented. The sun-shields are also designed to minimize solar pressure and center of gravity discrepancies, thus resulting in the “sugar-scoop” like shape. To prevent locally generated stray light from entering the 4 Kelvin environment during mission operations, a 4 K baffle around the telescope and IAM is used. The OST Observatory will be inserted to a Sun-Earth L2 for mission operations.

  19. Building the Green Bank Telescope

    Science.gov (United States)

    Kellermann, Kenneth I.

    2017-01-01

    In a previous presentation, I reported on how the freak collapse of the NRAO 300-ft transit radio telescope led to the inclusion of $75 million for a new radio telescope in the 1989 Congressional Emergency Supplemental Appropriations Act. But, this was only the beginning. NRAO was faced with challenging specifications and an unworkable schedule, but there was no design and no project team. Only one bid was even close to the Congressional appropriation. In an attempt to meet the unrealistic antenna delivery date, the contractor started construction of the foundation and fabrication of antenna members before the design was finished, leading to retrofits, redesign, and multiple delays. The antenna contractor was twice sold to other companies leading to further delays and cost escalation. In order to recoup their mounting losses, the new owners sued NRAO for $29 million for claimed design changes, and NRAO countersued demanding to be reimbursed for added project management costs and lost scientific data resulting from the seven-year delay in the completion of the telescope. Legal fees and a small net award in favor of the contractor left NRAO and the NSF with a nine million dollar bill which NSF handled by an innovative accounting adjustment.

  20. Academic Training: Deep Space Telescopes

    CERN Multimedia

    Françoise Benz

    2006-01-01

    2005-2006 ACADEMIC TRAINING PROGRAMME LECTURE SERIES 20, 21, 22, 23, 24 February from 11:00 to 12:00 - Council Chamber on 20, 21, 23, 24 February, TH Auditorium, bldg 4 - 3-006, on 22 February Deep Space Telescopes G. BIGNAMI / CNRS, Toulouse, F & Univ. di Pavia, I The short series of seminars will address results and aims of current and future space astrophysics as the cultural framework for the development of deep space telescopes. It will then present such new tools, as they are currently available to, or imagined by, the scientific community, in the context of the science plans of ESA and of all major world space agencies. Ground-based astronomy, in the 400 years since Galileo's telescope, has given us a profound phenomenological comprehension of our Universe, but has traditionally been limited to the narrow band(s) to which our terrestrial atmosphere is transparent. Celestial objects, however, do not care about our limitations, and distribute most of the information about their physics thro...

  1. LCOGT network observatory operations

    Science.gov (United States)

    Pickles, Andrew; Hjelstrom, Annie; Boroson, Todd; Burleson, Ben; Conway, Patrick; De Vera, Jon; Elphick, Mark; Haworth, Brian; Rosing, Wayne; Saunders, Eric; Thomas, Doug; White, Gary; Willis, Mark; Walker, Zach

    2014-08-01

    We describe the operational capabilities of the Las Cumbres Observatory Global Telescope Network. We summarize our hardware and software for maintaining and monitoring network health. We focus on methodologies to utilize the automated system to monitor availability of sites, instruments and telescopes, to monitor performance, permit automatic recovery, and provide automatic error reporting. The same jTCS control system is used on telescopes of apertures 0.4m, 0.8m, 1m and 2m, and for multiple instruments on each. We describe our network operational model, including workloads, and illustrate our current tools, and operational performance indicators, including telemetry and metrics reporting from on-site reductions. The system was conceived and designed to establish effective, reliable autonomous operations, with automatic monitoring and recovery - minimizing human intervention while maintaining quality. We illustrate how far we have been able to achieve that.

  2. The New Robotic Telescope at Oklahoma State University

    Science.gov (United States)

    Shull, Peter, Jr.

    2007-12-01

    A new, 0.6-m robotic telescope of Ritchey-Chrétien design was recently installed at the H. S. Mendenhall Observatory (HSMO) of Oklahoma State University (OSU), and is now undergoing operational tests. Funded by the Air Force Office of Scientific Research through the Defense University Research Instrumentation Program, it replaces HSMO's original 0.35-m Schmidt-Cassegrain telescope. Research programs will include the characterization of near-Earth objects and collaborative searches for transiting exoplanets, programs which will also open up new research opportunities for students in the Oklahoma-Arkansas region. Ideally, these opportunities will attract more undergraduate and graduate students to major in physics and astronomy, and foster the creation of degree programs in astronomy at OSU. Optical Guidance Systems was the contractor for both the telescope and dome automation. The telescope's ceramic 602-mm f/3 primary and 220-mm secondary mirrors yield an effective focal ratio of f/8 that can be changed to f/5.3 with a focal reducer / field flattener. Fields of view range from 0.75° at f/5.3 to 1.2° at f/8. The Strehl ratio is 0.954. The telescope's carbon-fiber Serrurier truss is supported by an equatorial fork mount equipped with friction drives. Telescope equipment includes a 35-mm-format CCD camera with UBVRI filters, field rotator, off-axis guider, and flip-mirror unit for quick switches to eyepiece observing. HSMO itself is conveniently located under reasonably dark skies at an elevation of 340 m about 15 km southwest of the city of Stillwater, whose population, including OSU, is approaching 50,000. HSMO's dome was completed in 2002, and funding is being raised for a control building near the dome. The observatory's URL is www.physics.okstate.edu/observatory.

  3. Cluster galaxy population evolution from the Subaru Hyper Suprime-Cam survey: brightest cluster galaxies, stellar mass distribution, and active galaxies

    Science.gov (United States)

    Lin, Yen-Ting; Hsieh, Bau-Ching; Lin, Sheng-Chieh; Oguri, Masamune; Chen, Kai-Feng; Tanaka, Masayuki; Chiu, I.-non; Huang, Song; Kodama, Tadayuki; Leauthaud, Alexie; More, Surhud; Nishizawa, Atsushi; Bundy, Kevin; Lin, Lihwai; Miyazaki, Satoshi; HSC Collaboration

    2018-01-01

    The unprecedented depth and area surveyed by the Subaru Strategic Program with the Hyper Suprime-Cam (HSC-SSP) have enabled us to construct and publish the largest distant cluster sample out to z~1 to date. In this exploratory study of cluster galaxy evolution from z=1 to z=0.3, we investigate the stellar mass assembly history of brightest cluster galaxies (BCGs), and evolution of stellar mass and luminosity distributions, stellar mass surface density profile, as well as the population of radio galaxies. Our analysis is the first high redshift application of the top N richest cluster selection, which is shown to allow us to trace the cluster galaxy evolution faithfully. Our stellar mass is derived from a machine-learning algorithm, which we show to be unbiased and accurate with respect to the COSMOS data. We find very mild stellar mass growth in BCGs, and no evidence for evolution in both the total stellar mass-cluster mass correlation and the shape of the stellar mass surface density profile. The clusters are found to contain more red galaxies compared to the expectations from the field, even after the differences in density between the two environments have been taken into account. We also present the first measurement of the radio luminosity distribution in clusters out to z~1.

  4. The nature of H α-selected galaxies along the large-scale structure at z = 0.4 revealed by Subaru Hyper Suprime-Cam survey

    Science.gov (United States)

    Koyama, Yusei; Hayashi, Masao; Tanaka, Masayuki; Kodama, Tadayuki; Shimakawa, Rhythm; Yamamoto, Moegi; Nakata, Fumiaki; Tanaka, Ichi; Suzuki, Tomoko L.; Tadaki, Ken-ichi; Nishizawa, Atsushi J.; Yabe, Kiyoto; Toba, Yoshiki; Lin, Lihwai; Jian, Hung-Yu; Komiyama, Yutaka

    2018-01-01

    We present the environmental dependence of color, stellar mass, and star formation (SF) activity in Hα-selected galaxies along the large-scale structure at z = 0.4 hosting twin clusters in the DEEP2-3 field, discovered by the Subaru Strategic Program of Hyper Suprime-Cam (HSC SSP). By combining photo-z-selected galaxies and Hα emitters selected with broadband and narrowband (NB) data from the recent data release of HSC SSP (DR1), we confirm that galaxies in higher-density environments or galaxies in cluster central regions show redder colors. We find that there still remains a possible color-density and color-radius correlation even if we restrict the sample to Hα-selected galaxies, probably due to the presence of massive Hα emitters in denser regions. We also find a hint of increased star formation rates (SFR) amongst Hα emitters toward the highest-density environment, again primarily driven by the excess of red/massive Hα emitters in high-density environments, while their specific SFRs do not significantly change with environment. This work demonstrates the power of the HSC SSP NB data for studying SF galaxies across environments in the distant universe.

  5. Study of trace gases in the Martian atmosphere: Groundbased observation using SUBARU/IRCS and development of radiative transfer model for MEX/PFS limb observation

    Science.gov (United States)

    Aoki, S.; Nakagawa, H.; Kasaba, Y.; Giuranna, M.; Geminale, A.; Sindoni, G.; Sagawa, H.; Mendrok, J.; Kasai, Y.; Formisano, V.

    2012-09-01

    We observed Martian atmosphere to investigate CH4, H2O, and HDO on 30 November 2011, 4-5 January 2012, and 12 April 2012 using SUBARU/ IRCS. This observation aims to verify CH4 on Mars, constrain its source, and investigate the distribution of H2O/HDO ratio. Our observation covered possible source areas of CH4, i.e. the areas where the extend plumes of CH4 were detected by previous groundbased and MEX/PFS observations [1,2] and the potential mud volcanism areas [3,4]. This paper will show some preliminary results. Vertical profiles of these trace gases are crucial for understanding their chemistry and transportation. Limb observations by MEX/PFS are a powerful tool to retrieve vertical profiles of H2O, CO, and CH4. For this purpose, we adapted the SARTre model, a radiative transfer code which includes multiple scattering for limb geometry observations developed for the terrestrial atmosphere [5], to the Martian atmosphere. In order to validate our model, SARTre model for Martian limb, we first compared of our synthetic spectra in nadir geometry with the result from ARS [6] which has been widely used for previous studies of MEX/PFS nadir-observation. We concluded that the difference between them is small offset (below 3%) in the spectral range between 3000 and 3030 cm-1.

  6. Development of a Multivariable Parametric Cost Analysis for Space-Based Telescopes

    Science.gov (United States)

    Dollinger, Courtnay

    2011-01-01

    Over the past 400 years, the telescope has proven to be a valuable tool in helping humankind understand the Universe around us. The images and data produced by telescopes have revolutionized planetary, solar, stellar, and galactic astronomy and have inspired a wide range of people, from the child who dreams about the images seen on NASA websites to the most highly trained scientist. Like all scientific endeavors, astronomical research must operate within the constraints imposed by budget limitations. Hence the importance of understanding cost: to find the balance between the dreams of scientists and the restrictions of the available budget. By logically analyzing the data we have collected for over thirty different telescopes from more than 200 different sources, statistical methods, such as plotting regressions and residuals, can be used to determine what drives the cost of telescopes to build and use a cost model for space-based telescopes. Previous cost models have focused their attention on ground-based telescopes due to limited data for space telescopes and the larger number and longer history of ground-based astronomy. Due to the increased availability of cost data from recent space-telescope construction, we have been able to produce and begin testing a comprehensive cost model for space telescopes, with guidance from the cost models for ground-based telescopes. By separating the variables that effect cost such as diameter, mass, wavelength, density, data rate, and number of instruments, we advance the goal to better understand the cost drivers of space telescopes.. The use of sophisticated mathematical techniques to improve the accuracy of cost models has the potential to help society make informed decisions about proposed scientific projects. An improved knowledge of cost will allow scientists to get the maximum value returned for the money given and create a harmony between the visions of scientists and the reality of a budget.

  7. The Carlina-type diluted telescope. Stellar fringes on Deneb

    Science.gov (United States)

    Le Coroller, H.; Dejonghe, J.; Hespeels, F.; Arnold, L.; Andersen, T.; Deram, P.; Ricci, D.; Berio, P.; Blazit, A.; Clausse, J.-M.; Guillaume, C.; Meunier, J. P.; Regal, X.; Sottile, R.

    2015-01-01

    Context. The performance of interferometers has been much increased over the past ten years. But the number of observable objects is still limited by the low sensitivity and imaging capability of the current facilities. Studies have been conducted with the aim to propose a new generation of interferometers. Aims: The Carlina concept studied at the Haute-Provence Observatory consists of an optical interferometer configured as a diluted version of the Arecibo radio telescope: above the diluted primary mirror made of fixed co-spherical segments, a helium balloon or cables that are suspended between two mountains and/or pylons carry a gondola containing the focal optics. This concept does not require delay lines. Methods: Since 2003, we have been building a technical demonstrator of this diluted telescope. The main goals of this project were to find opto-mechanical solutions to stabilize the optics attached to cables at several tens of meters above the ground, and to characterize this diluted telescope under real conditions. In 2012, we obtained metrology fringes, and co-spherized the primary mirrors within one micron accuracy. In 2013, we tested the whole optical train: servo loop, metrology, and the focal gondola. Results: We obtained stellar fringes on Deneb in September 2013. We here present the characteristics of these observations: quality of the guiding, signal-to-noise ratio reached, and possible improvements for a future system. Conclusions: By detecting fringes on Deneb, we confirm that the entire system conceptually has worked correctly. It also proves that when the primary mirrors are aligned using the metrology system, we can directly record fringes in the focal gondola, even in blind operation. It is an important step that demonstrates the feasibility of building a diluted telescope using cables strained between cliffs or pylons. Carlina, like the Multiple Mirror Telescope (MMT) or Large Binocular Telescope (LBT), could be one of the first members of a

  8. beta* leveling with telescopic ATS squeeze (MD 2410)

    CERN Document Server

    Wenninger, Jorg; Hostettler, Michi; Pojer, Mirko; Ponce, Laurette; Tydecks, Tobias; CERN. Geneva. ATS Department

    2017-01-01

    Luminosity leveling by beta* is the baseline operational scenario of HL-LHC, and this leveling technique may be used in 2018 or during run~3 depending on the beam parameters and beta* range. During this MD beta*leveling was commissioned successfully for the first time with the telescopic squeeze over the beta* range of 40 cm to 30 cm. A novel beta* leveling controls technique based on a modification of the LSA trim was also tested during the MD.

  9. Daniel K. Inouye Solar Telescope system safety

    Science.gov (United States)

    Hubbard, Robert P.; Bulau, Scott E.; Shimko, Steve; Williams, Timothy R.

    2014-08-01

    System safety for the Daniel K. Inouye Solar Telescope (DKIST) is the joint responsibility of a Maui-based safety team and the Tucson-based systems engineering group. The DKIST project is committed to the philosophy of "Safety by Design". To that end the project has implemented an aggressive hazard analysis, risk assessment, and mitigation system. It was initially based on MIL-STD-882D, but has since been augmented in a way that lends itself to direct application to the design of our Global Interlock System (GIS). This was accomplished by adopting the American National Standard for Industrial Robots and Robot Systems (ANSI/RIA R15.06) for all identified hazards that involve potential injury to personnel. In this paper we describe the details of our augmented hazard analysis system and its use by the project. Since most of the major hardware for the DKIST (e.g., the enclosure, and telescope mount assembly) has been designed and is being constructed by external contractors, the DKIST project has required our contractors to perform a uniform hazard analysis of their designs using our methods. This paper also describes the review and follow-up process implemented by the project that is applied to both internal and external subsystem designs. Our own weekly hazard analysis team meetings have now largely turned to system-level hazards and hazards related to specific tasks that will be encountered during integration, test, and commissioning and maintenance operations. Finally we discuss a few lessons learned, describing things we might do differently if we were starting over today.

  10. SST-GATE: an innovative telescope for very high energy astronomy

    Science.gov (United States)

    Laporte, Philippe; Dournaux, Jean-Laurent; Sol, Hélène; Blake, Simon; Boisson, Catherine; Chadwick, Paula; Dumas, Delphine; Fasola, Gilles; de Frondat, Fatima; Greenshaw, Tim; Hervet, Olivier; Hinton, James; Horville, David; Huet, Jean-Michel; Jégouzo, Isabelle; Schmoll, Jürgen; White, Richard; Zech, Andreas

    2012-09-01

    The Cherenkov Telescope Array (CTA) is an international collaboration that aims to create the world's largest (ever) Very High Energy gamma-ray telescope array, consisting of more than 100 telescopes covering an area of several square kilometers to observe the electromagnetic showers generated by incoming cosmic gamma-rays with very high energies (from a few tens of GeV up to over 100 TeV). Observing such sources requires - amongst many other things - a large FoV (Field of View). In the framework of CTA, SST-GATE (Small Size Telescope - GAmma-ray Telescope Elements) aims to investigate and to build one of the two first CTA prototypes based on the Schwarzschild-Couder (SC) optical design that delivers a FoV close to 10 degrees in diameter. To achieve the required performance per unit cost, many improvements in mirror manufacturing and in other technologies are required. We present in this paper the current status of our project. After a brief introduction of the very high energy context, we present the opto-mechanical design, discuss the technological tradeoffs and explain the electronics philosophy that will ensure the telescopes cost is minimised without limiting its capabilities. We then describe the software nedeed to operate the telescope and conclude by presenting the expected telescope performance and some management considerations.

  11. Initial Results Obtained with the First TWIN VLBI Radio Telescope at the Geodetic Observatory Wettzell

    Directory of Open Access Journals (Sweden)

    Torben Schüler

    2015-07-01

    Full Text Available Geodetic Very Long Baseline Interferometry (VLBI uses radio telescopes as sensor networks to determine Earth orientation parameters and baseline vectors between the telescopes. The TWIN Telescope Wettzell 1 (TTW1, the first of the new 13.2 m diameter telescope pair at the Geodetic Observatory Wettzell, Germany, is currently in its commissioning phase. The technology behind this radio telescope including the receiving system and the tri-band feed horn is depicted. Since VLBI telescopes must operate at least in pairs, the existing 20 m diameter Radio Telescope Wettzell (RTW is used together with TTW1 for practical tests. In addition, selected long baseline setups are investigated. Correlation results portraying the data quality achieved during first initial experiments are discussed. Finally, the local 123 m baseline between the old RTW telescope and the new TTW1 is analyzed and compared with an existing high-precision local survey. Our initial results are very satisfactory for X-band group delays featuring a 3D distance agreement between VLBI data analysis and local ties of 1 to 2 mm in the majority of the experiments. However, S-band data, which suffer much from local radio interference due to WiFi and mobile communications, are about 10 times less precise than X-band data and require further analysis, but evidence is provided that S-band data are well-usable over long baselines where local radio interference patterns decorrelate.

  12. Observations of Bright Massive Stars Using Small Size Telescopes

    Science.gov (United States)

    Beradze, Sopia; Kochiashvili, Nino

    2017-11-01

    The size of a telescope determines goals and objects of observations. During the latest decades it becomes more and more difficult to get photometric data of bright stars because most of telescopes of small sizes do not operate already. But there are rather interesting questions connected to the properties and evolution ties between different types of massive stars. Multi-wavelength photometric data are needed for solution of some of them. We are presenting our observational plans of bright Massive X-ray binaries, WR and LBV stars using a small size telescope. All these stars, which are presented in the poster are observational targets of Sopia Beradze's future PhD thesis. We already have got very interesting results on the reddening and possible future eruption of the massive hypergiant star P Cygni. Therefore, we decided to choose some additional interesting massive stars of different type for future observations. All Massive stars play an important role in the chemical evolution of galaxies because of they have very high mass loss - up to 10-4M⊙/a year. Our targets are on different evolutionary stages and three of them are the members of massive binaries. We plan to do UBVRI photometric observations of these stars using the 48 cm Cassegrain telescope of the Abastumani Astrophisical Observatory.

  13. Multivariable parametric cost model for space and ground telescopes

    Science.gov (United States)

    Stahl, H. Philip; Henrichs, Todd

    2016-09-01

    Parametric cost models can be used by designers and project managers to perform relative cost comparisons between major architectural cost drivers and allow high-level design trades; enable cost-benefit analysis for technology development investment; and, provide a basis for estimating total project cost between related concepts. This paper hypothesizes a single model, based on published models and engineering intuition, for both ground and space telescopes: OTA Cost (X) D (1.75 +/- 0.05) λ (-0.5 +/- 0.25) T-0.25 e (-0.04) Y Specific findings include: space telescopes cost 50X to 100X more ground telescopes; diameter is the most important CER; cost is reduced by approximately 50% every 20 years (presumably because of technology advance and process improvements); and, for space telescopes, cost associated with wavelength performance is balanced by cost associated with operating temperature. Finally, duplication only reduces cost for the manufacture of identical systems (i.e. multiple aperture sparse arrays or interferometers). And, while duplication does reduce the cost of manufacturing the mirrors of segmented primary mirror, this cost savings does not appear to manifest itself in the final primary mirror assembly (presumably because the structure for a segmented mirror is more complicated than for a monolithic mirror).

  14. Overview and status of the Giant Magellan Telescope project

    Science.gov (United States)

    Bernstein, Rebecca A.; McCarthy, Patrick J.; Raybould, Keith; Bigelow, Bruce C.; Bouchez, Atonin H.; Filgueira, José M.; Jacoby, George; Johns, Matt; Sawyer, David; Shectman, Stephen; Sheehan, Michael

    2014-07-01

    The Giant Magellan Telescope (GMT) is a 25.4-m diameter, optical/infrared telescope that is being built by an international consortium of universities and research institutions as one of the next generation of Extremely Large Telescopes. The primary mirror of GMT consists of seven 8.4 m borosilicate honeycomb mirror segments that are optically conjugate to seven corresponding segments in the Gregorian secondary mirror. Fabrication is complete for one primary mirror segment and is underway for the next two. The final focal ratio of the telescope is f/8.2, so that the focal plane has an image scale of 1.02 arcsec/mm. GMT will be commissioned using a fast-steering secondary mirror assembly comprised of conventional, rigid segments to provide seeing-limited observations. A secondary mirror with fully adaptive segments will be used in standard operation to additionally enable ground-layer and diffraction-limited adaptive optics. In the seeing limited mode, GMT will provide a 10 arcmin field of view without field correction. A 20 arcmin field of view will be obtained using a wide-field corrector and atmospheric dispersion compensator. The project has recently completed a series of sub-system and system-level preliminary design reviews and is currently preparing to move into the construction phase. This paper summarizes the technical development of the GMT sub-systems and the current status of the GMT project.

  15. An EUDET/AIDA Pixel Beam Telescope for Detector Development

    CERN Document Server

    Rubinskiy, I

    2015-01-01

    A high resolution (σ∼2μm) beam telescope based on monolithic active pixel sensors (MAPS) was developed within the EUDET collaboration. The telescope consists of six monolithic active pixel sensor planes (Mimosa26) with a pixel pitch of 18.4 \\mu m and thinned down to 50 \\mu m. The excellent resolution, readout rate and DAQ integration capabilities made the telescope a primary test beam tool for many groups including several CERN based experiments. Within the European detector infrastructure project AIDA the test beam telescope is being further extended in terms of cooling and powering infrastructure, read-out speed, area of acceptance, and precision. In order to provide a system optimized for the different requirements by the user community a combination of various state-of-the-art pixel technologies is foreseen. Furthermore, new central dead-time-free trigger logic unit (TLU) has been developed to provide LHC-speed response with one-trigger-per-particle operating mode and a synchronous clock for all conn...

  16. HARPS3 for a roboticized Isaac Newton Telescope

    Science.gov (United States)

    Thompson, Samantha J.; Queloz, Didier; Baraffe, Isabelle; Brake, Martyn; Dolgopolov, Andrey; Fisher, Martin; Fleury, Michel; Geelhoed, Joost; Hall, Richard; González Hernández, Jonay I.; ter Horst, Rik; Kragt, Jan; Navarro, Ramón; Naylor, Tim; Pepe, Francesco; Piskunov, Nikolai; Rebolo, Rafael; Sander, Louis; Ségransan, Damien; Seneta, Eugene; Sing, David; Snellen, Ignas; Snik, Frans; Spronck, Julien; Stempels, Eric; Sun, Xiaowei; Santana Tschudi, Samuel; Young, John

    2016-08-01

    We present a description of a new instrument development, HARPS3, planned to be installed on an upgraded and roboticized Isaac Newton Telescope by end-2018. HARPS3 will be a high resolution (R≃115,000) echelle spectrograph with a wavelength range from 380-690 nm. It is being built as part of the Terra Hunting Experiment - a future 10- year radial velocity measurement programme to discover Earth-like exoplanets. The instrument design is based on the successful HARPS spectrograph on the 3.6m ESO telescope and HARPS-N on the TNG telescope. The main changes to the design in HARPS3 will be: a customised fibre adapter at the Cassegrain focus providing a stabilised beam feed and on-sky fibre diameter ≍1:4 arcsec, the implementation of a new continuous ow cryostat to keep the CCD temperature very stable, detailed characterisation of the HARPS3 CCD to map the effective pixel positions and thus provide an improved accuracy wavelength solution, an optimised integrated polarimeter and the instrument integrated into a robotic operation. The robotic operation will optimise our programme which requires our target stars to be measured on a nightly basis. We present an overview of the entire project, including a description of our anticipated robotic operation.

  17. Asteroid Detection Results Using the Space Surveillance Telescope

    Science.gov (United States)

    Ruprecht, Jessica D.; Ushomirsky, Gregory; Woods, Deborah F.; Viggh, Herbert E. M.; Varey, Jacob; Cornell, Mark E.; Stokes, Grant

    2015-11-01

    From 1998-2013, MIT Lincoln Laboratory operated a highly successful near-Earth asteroid search program using two 1-m optical telescopes located at the MIT Lincoln Laboratory Experimental Test Site (ETS) in Socorro, N.M. In 2014, the Lincoln Near-Earth Asteroid Research (LINEAR) program successfully transitioned operations from the two 1-m telescopes to the 3.5-m Space Surveillance Telescope (SST) located at Atom Site on White Sands Missile Range, N.M. This paper provides a summary of first-year performance and results for the LINEAR program with SST and provides an update on recent improvements to the moving-object pipeline architecture that increase utility of SST data for NEO discovery and improve sensitivity to fast-moving objects. Ruprecht et al. (2014) made predictions for SST NEO search productivity as a function of population model. This paper assesses the NEO search performance of SST in the first 1.5 years of operation and compares results to model predictions.This work is sponsored by the Defense Advanced Research Projects Agency and the National Aeronautics and Space Administration under Air Force Contract #FA8721-05-C-0002. The views, opinions, and/or findings contained in this article/presentation are those of the authors / presenters and should not be interpreted as representing the official views or policies of the Department of Defense or the U.S. Government. Distribution Statement A: Approved for public release, distribution unlimited.

  18. Merz telescopes a global heritage worth preserving

    CERN Document Server

    2017-01-01

    This book comprises a fascinating collection of contributions on the Merz telescopes in Italy that collectively offer the first survey on historical large refracting telescopes in the country, drawing on original documents and photographs. It opens with a general introduction on the importance of Merz telescopes in the history of astronomy and analyses of the local and international contexts in which the telescopes were made. After examination of an example of the interaction between the maker and the astronomer in the construction and maintenance of these refractors, the history of the Merz telescopes at the main Italian observatories in the nineteenth century is described in detail. Expert testimony is also provided on how these telescopes were successfully used until the second half of the twentieth century for research purposes, thus proving their excellent optical qualities.

  19. Advances in telescope mirror cleaning

    Science.gov (United States)

    Blanken, Maarten F.; Chopping, Alan K.; Dee, Kevin M.

    2004-09-01

    Metrology and cleaning techniques for telescope mirrors are generally well established. CO2 cleaning and water washing are mainly used. Water washing has proven to be the best method of removing oil and water stains and restoring the aluminium to nearly fresh values. The risk of water getting to unwanted places such as electronics or other optics prevents this method from being employed more often. Recently the Isaac Newton Group introduced a new cleaning technique for their telescope mirrors, which reduces the risks discussed above. This technique uses water vapour instead of water to wash the mirror. The advantage of this method is that the amount of water needed is drastically reduced. In addition the pressure of the vapour will blow away any large dust particles on the mirror and the temperature shock between the vapour and the mirror will help to de-bond the dust particles. Adding a soapy solution will help to clean oil and watermarks of the mirror. This paper describes the vapour cleaning method, tests that have been done and the overall findings.

  20. Telescoping phenomenon in pathological gambling

    DEFF Research Database (Denmark)

    Grant, Jon E; Odlaug, Brian Lawrence; Mooney, Marc E

    2012-01-01

    The course of pathological gambling (PG) in women has been described as having a later age of initiation but a shorter time to problematic gambling ("telescoped"). This study examined evidence for telescoping and its relationship with comorbidities. Seventy-one treatment-seeking individuals with PG...... underwent a diagnostic interview to examine gambling behaviors, age at initiation of gambling, and time from initiation to meeting criteria for PG. The women had a higher mean age at gambling initiation compared with that of the men (mean [SD] age, 31.3 [13.0] years, compared with 22.4 [7.9] years; p = 0.......0003) and a significantly shorter time from initiation of gambling to meeting the criteria for PG (8.33 [8.7] years compared with 11.97 [9.1] years; p = 0.0476) after controlling for demographic and clinical variables. This study presents evidence for a gender-specific course of PG unrelated to psychiatric comorbidities...

  1. Large aperture diffractive space telescope

    Science.gov (United States)

    Hyde, Roderick A.

    2001-01-01

    A large (10's of meters) aperture space telescope including two separate spacecraft--an optical primary objective lens functioning as a magnifying glass and an optical secondary functioning as an eyepiece. The spacecraft are spaced up to several kilometers apart with the eyepiece directly behind the magnifying glass "aiming" at an intended target with their relative orientation determining the optical axis of the telescope and hence the targets being observed. The objective lens includes a very large-aperture, very-thin-membrane, diffractive lens, e.g., a Fresnel lens, which intercepts incoming light over its full aperture and focuses it towards the eyepiece. The eyepiece has a much smaller, meter-scale aperture and is designed to move along the focal surface of the objective lens, gathering up the incoming light and converting it to high quality images. The positions of the two space craft are controlled both to maintain a good optical focus and to point at desired targets which may be either earth bound or celestial.

  2. Origins Space Telescope: Study Plan

    Science.gov (United States)

    Nayyeri, Hooshang; Cooray, Asantha; Origins Space Telescope Study Team

    2018-01-01

    The Origins Space Telescope (OST) is the mission concept for the Far-Infrared Surveyor, a study in development by NASA in preparation for the 2020 Astronomy and Astrophysics Decadal Survey. Origins is planned to be a large aperture, actively-cooled telescope covering a wide span of the mid- to far-infrared spectrum. Its spectrographs will enable 3D surveys of the sky that will discover and characterize the most distant galaxies, Milky-Way, exoplanets, and the outer reaches of our Solar system. Origins will enable flagship-quality general observing programs led by the astronomical community in the 2030s. The Science and Technology Definition Team (STDT) would like to hear your science needs and ideas for this mission. The team can be contacted at firsurveyor_info@lists.ipac.caltech.edu. This presentation will provide a summary of the OST STDT, the OST Study Team based at NASA Goddard Space Flight Center, study partners, and the advisory panel to the study. This presentation will also summarize recent activities, including the process used to reach a decision on the mission architecture, the identification of key science drivers, and the key study milestones between 2017 and 2020.

  3. Design of Galilean-type telescope systems.

    Science.gov (United States)

    Menchaca, C; Malacara, D

    1988-09-01

    In this paper we present the design of three Galilean-type telescope systems with magnifications of 2.2x, 4x, and 5x. These systems are free of the large weight and length as well as the reduced field of view, which are frequent undesirable properties of Galilean telescopes. These designs have a moderate field of view and a short length, with reasonably good aberration correction, and may be used as binocular telescopes or magnifiers with a large working distance.

  4. The telescope control of the ASTRI SST-2M prototype for the Cherenkov telescope Array: hardware and software design architecture

    Science.gov (United States)

    Antolini, Elisa; Cascone, Enrico; Schwarz, Joseph; Stringhetti, Luca; Tanci, Claudio; Tosti, Gino; Aisa, Damiano; Aisa, Simone; Bagaglia, Marco; Busatta, Andrea; Campeggi, Carlo; Cefala, Marco; Farnesini, Lucio; Giacomel, Stefano; Marchiori, Gianpiero; Marcuzzi, Enrico; Nucciarelli, Giuliano; Piluso, Antonfranco

    2014-07-01

    ASTRI (Astrofisica con Specchi a Tecnologia Replicante Italiana) is a flagship project of the Italian Ministry of Research and led by the Italian National Institute of Astrophysics (INAF). One of its aims is to develop, within the Cherenkov Telescope Array (CTA) framework, an end-to-end small-sized telescope prototype in a dual-mirror configuration (SST-2M) in order to investigate the energy range E ~ 1-100 TeV. A long-term goal of the ASTRI program is the production of an ASTRI/CTA mini-array composed of seven SST-2M telescopes. The prototype, named ASTRI SST-2M, is seen as a standalone system that needs only network and power connections to work. The software system that is being developed to control the prototype is the base for the Mini-Array Software System (MASS), which has the task to make possible the operation of both the ASTRI SST-2M prototype and the ASTRI/CTA mini-array. The scope of this contribution is to give an overview of the hardware and software architecture adopted for the ASTRI SST- 2M prototype, showing how to apply state of the art industrial technologies to telescope control and monitoring systems.

  5. Autoguiding system for the 2-m RCC telescope of the Rozhen National Astronomical Observatory

    Science.gov (United States)

    Bonev, Tanyu; Lukarski, Hristo; Parov, Ivan; Neykov, Svetoslav; Marinkov, Valeri; Yaramov, Krassimir

    This paper describes the design, the parameters, and the basics of operation of the autoguider for the 2-meter telescope of the Rozhen National Astronomical Observatory. The results of tests are presented which aimed the characterization the response of the telescope against short-time corrections. Special attention is devoted to particular details of the system which were included in order to assure correct operation of the autoguider in case of sporadic displacements from the nominal telescope tracking. First tests of long exposure observations obtained with autoguiding show a substantial increase of the imaging quality in the Ritchey-Chretien focus of the 2-m telescope. The autoguiding system was designed and manufactured with financial support by UNESCO - Regional Bureau for Science and Culture Europe (BRESCE).

  6. Trading order for degree in creative telescoping

    Science.gov (United States)

    Chen, Shaoshi; Kauers, Manuel

    2012-01-01

    We analyze the differential equations produced by the method of creative telescoping applied to a hyperexponential term in two variables. We show that equations of low order have high degree, and that higher order equations have lower degree. More precisely, we derive degree bounding formulas which allow to estimate the degree of the output equations from creative telescoping as a function of the order. As an application, we show how the knowledge of these formulas can be used to improve, at least in principle, the performance of creative telescoping implementations, and we deduce bounds on the asymptotic complexity of creative telescoping for hyperexponential terms. PMID:26538804

  7. eSTAR: a distributed telescope network

    Science.gov (United States)

    Steele, Iain A.; Naylor, Tim; Allan, Alisdair; Etherton, Jason; Mottram, C. J.

    2002-11-01

    The e-STAR (e-Science Telescopes for Astronomical Research) project uses GRID techniques to develop the software infrastructure for a global network of robotic telescopes. The basic architecture is based around Intelligent Agents which request data from Discovery Nodes that may be telescopes or databases. Communication is based on a development of the XML RTML language secured using the Globus I/O library, with status serving provided via LDAP. We describe the system architecture and protocols devised to give a distributed approach to telescope scheduling, as well as giving details of the implementation of prototype Intelligent Agent and Discovery Node systems.

  8. An afocal telescope configuration for the ESA Ariel mission

    Science.gov (United States)

    Da Deppo, V.; Middleton, K.; Focardi, M.; Morgante, G.; Pace, E.; Claudi, R.; Micela, G.

    2017-09-01

    ARIEL (Atmospheric Remote-sensing Infrared Exoplanet Large-survey) is one of the three candidates for the next ESA medium-class science mission (M4) expected to be launched in 2026. This mission will be devoted to observing spectroscopically in the infrared (IR) a large population of known transiting planets in the neighborhood of the Solar System, opening a new discovery space in the field of extrasolar planets and enabling the understanding of the physics and chemistry of these far away worlds. ARIEL is based on a 1-m class telescope ahead of two spectrometer channels covering the band 1.95 to 7.8 microns. In addition there are four photometric channels: two wide band, also used as fine guidance sensors, and two narrow band. During its 3.5 years of operations from L2 orbit, ARIEL will continuously observe exoplanets transiting their host star. The ARIEL optical design is conceived as a fore-module common afocal telescope that will feed the spectrometer and photometric channels. The telescope optical design is composed of an off-axis portion of a two-mirror classic Cassegrain coupled to a tertiary off-axis paraboloidal mirror. The telescope and optical bench operating temperatures, as well as those of some subsystems, will be monitored and fine tuned/stabilised mainly by means of a thermal control subsystem (TCU-Telescope Control Unit) working in closed-loop feedback and hosted by the main Payload electronics unit, the Instrument Control Unit (ICU). Another important function of the TCU will be to monitor the telescope and optical bench thermistors when the Payload decontamination heaters will be switched on (when operating the instrument in Decontamination Mode) during the Commissioning Phase and cyclically, if required. Then the thermistors data will be sent by the ICU to the On Board Computer by means of a proper formatted telemetry. The latter (OBC) will be in charge of switching on and off the decontamination heaters on the basis of the thermistors readout

  9. Silicon telescope for prototype sensor characterisation using particle beam and cosmic rays

    CERN Multimedia

    Fu, Jinlin

    2016-01-01

    We present the design and the performance of a silicon strip telescope that we have built and recently used as reference tracking system for prototype sensor characterisation. The telescope was operated on beam at the CERN SPS and also using cosmic rays in the laboratory. We will describe the data acquisition system, based on a custom electronic board that we have developed, and the online monitoring system to control the quality of the data in real time.

  10. SOFIA mission operations

    Science.gov (United States)

    Waddell, Patrick G.; Davidson, Jacqueline A.

    2002-02-01

    The SOFIA Airborne Observatory will operate a 2.5 m aperture telescope with the goal of obtaining over 960 successful science hours per year at a nominal altitude of 12.5 km and covering a wavelength range from 0.3 mm to 1.6 mm. The observatory platform is comprised of a Boeing 747SP with numerous significant modifications. The ground and flight mission operations architectures and plans are tailored to keep the telescope emissivity low and achieve high observing efficiency.

  11. On the nature of infrared-faint radio sources in the Subaru X-ray Deep and Very Large Array-VIMOS VLT Deep Survey fields

    Science.gov (United States)

    Singh, Veeresh; Wadadekar, Yogesh; Ishwara-Chandra, C. H.; Sirothia, Sandeep; Sievers, Jonathan; Beelen, Alexandre; Omont, Alain

    2017-10-01

    Infrared-faint radio sources (IFRSs) are an unusual class of objects that are relatively bright at radio wavelengths but have faint or undetected infrared counterparts, even in deep surveys. We identify and investigate the nature of IFRSs using deep radio (S1.4 GHz ˜ 100 μJy beam-1 at 5σ), optical (mr ˜ 26-27.7 at 5σ) and near-infrared (S3.6 μm ˜ 1.3-2.0 μJy beam-1 at 5σ) data that are available in two deep fields: the Subaru X-ray Deep Field (SXDF) and the Very Large Array-VIMOS VLT Deep Survey (VLA-VVDS) field. In 1.8 deg2 of the two fields, we identify a total of nine confirmed and ten candidate IFRSs. We find that our IFRSs are high-redshift radio-loud active galactic nuclei, with 12/19 sources having redshift estimates in the range of z ˜ 1.7-4.3, while a limit of z ≥ 2.0 is placed on the remaining seven sources. Notably, for the first time, our study finds IFRSs with measured redshift >3.0, and also redshift estimates for IFRSs in the faintest 3.6-μm flux regime (i.e. S3.6 μm colour (mr-m24 μm) suggest that a significant fraction of IFRSs are likely to be hosted in dusty obscured galaxies.

  12. A Combined Subaru/VLT/MMT 1-5 Micrometer Study of Planets Orbiting HR 8799: Implications For Atmospheric Properties, Masses and Formation

    Science.gov (United States)

    Currie, Thayne; Burrows, Adam; Itoh, Yoichi; Matsumura, Soko; Fukagawa, Misato; Apai, Daniel; Madhusudhan, Nikku; Hinz, Philip M.; Rodigas, T. J.; Kasper, Markus; hide

    2011-01-01

    We present new 1-1.25 micron (z and J band) Subaru/IRCS and 2 micron (K band) VLT/NaCo data for HR 8799 and a rereduction of the 3-5 micron MMT/Clio data first presented by Hinz et al. Our VLT/NaCo data yield a detection of a fourth planet at a projected separation of approximately 15 AU--"HR 8799e ." We also report new, albeit weak detections of HR 8799b at 1.03 micron and 3.3 micron. Empirical comparisons to field brown dwarfs show that at least HR 8799b and HR 8799c, and possibly HR 8799d, have near-to-mid-IR colors/ magnitudes significantly discrepant from the L/T dwarf sequence. Standard cloud deck atmosphere models appropriate for brown dwarfs provide only (marginally) statistically meaningful fits to HR 8799b and c for unphysically small radii. Models with thicker cloud layers not present in brown dwarfs reproduce the planets' spectral energy distributions far more accurately and without the need for resealing the planets' radii. Our preliminary modeling suggests that HR 8799b has log(g) = 4-4.5, T(sub eff) = 900 K. while HR 8799c, d, and (by inference) e have log(g) = 4-4.5, T(sub eff) = 1000-1200 K. Combining results from planet evolution models and new dynamical stability limits implies that the masses of HR 8799b, c, d, and e are 6-7 M(sub j), 7-10 M(sub j), 7-10 M(sub j), and 7-10 M(sub j). "Patchy" cloud prescriptions may provide even better fits to the data and may lower the estimated surface gravities and masses. Finally, contrary to some recent claims, forming the HR 8799 planets by core accretion is still plausible, although such systems are likely rare.

  13. Lyman-break Galaxies at z ∼ 3 in the Subaru Deep Field: Luminosity Function, Clustering, and [O III] Emission

    Science.gov (United States)

    Malkan, Matthew A.; Cohen, Daniel P.; Maruyama, Miyoko; Kashikawa, Nobunari; Ly, Chun; Ishikawa, Shogo; Shimasaku, Kazuhiro; Hayashi, Masao; Motohara, Kentaro

    2017-11-01

    We combined deep U-band and optical/near-infrared imaging, in order to select Lyman Break Galaxies (LBGs) at z∼ 3 using U ‑ V and V-{R}c colors in the Subaru Deep Field. The resulting sample of 5161 LBGs gives a UV luminosity function (LF) down to {M}{UV}=-18, with a steep faint-end slope of α =-1.78+/- 0.05. We analyze UV-to-NIR energy distributions (SEDs) from optical photometry and photometry on IR median-stacked images. In the stacks, we find a systematic background depression centered on the LBGs. This results from the difficulty of finding faint galaxies in regions with higher-than-average surface densities of foreground galaxies, so we corrected for this deficit. Best-fit stellar population models for the LBG SEDs indicate stellar masses and star formation rates of {{log}}10({M}* /{M}ȯ )≃ 10 and ≃ 50 M ⊙ yr‑1 at =24, down to {{log}}10({M}* /{M}ȯ )≃ 8 and ≃ 3 {M}ȯ yr‑1 at =27. The faint LBGs show a ∼1 mag excess over the stellar continuum in K-band. We interpret this excess flux as redshifted [O III]λ λ {4959,5007} lines. The observed excesses imply equivalent widths that increase with decreasing mass, reaching {{EW}}0([{{O}} {{iii}}]4959,5007+{{H}}β )≳ 1500 Å (rest-frame). Such strong [O III] emission is seen only in a miniscule fraction of local emission-line galaxies, but is probably universal in the faint galaxies that reionized the universe. Our halo occupation distribution analysis of the angular correlation function gives a halo mass of {{log}}10( /{h}-1{M}ȯ )=11.29+/- 0.12 for the full sample of LBGs, and {{log}}10( /{h}-1{M}ȯ )=11.49+/- 0.1 for the brightest half of the sample.

  14. A Characterization Of The GNAT SciTech STAR Class 0.5m Prototype Telescope

    Science.gov (United States)

    Barentine, J. C.; Culver, R. B.

    2002-05-01

    In 1995 the Global Network of Automated Telescopes (GNAT) acquired an option to purchase a 0.5m "STAR" class telescope, manufactured by SciTech Corporation of Forresthill, CA, contingent upon its attainment of performance specifications published by SciTech. In spite of a concerted, and protracted effort, the telescope has not yet approached the manufacturer's specifications, and has proven largely unusable for its intended purpose. In light of the difficult history of commercial development of true automated telescopes (see Sinnott 1996 and Henry 1994) it is important to understand the current state of such commercial systems. We present results of a characterization of this telescope and recommendations for how to proceed in light of its failure to attain specifications. Principle failings of the telescope can be summarized as follows: 1) the mechanical structure was inadequately designed and built, yielding large and unacceptable pointing and tracking errors, 2) the autoguider system was never successfully implemented, limiting the system to very short integrations, 3) the autofocus mechanism was never successfully implemented, resulting in periodic, unacceptable focus drifts during automatic operation, 4) the telescope control system as provided with the telescope did not work and ultimately had to be developed by an independent contractor recommended by GNAT and contracted through SciTech, and 5) the telescope optical system design did not adequately accommodate scattered light issues, yielding significant scattered light contributions to the images under certain conditions. Based on analyses of these issues, we present recommendations for improvements in this system. Support of this work has been provided by Colorado State University and GNAT. REFERENCES Sinnott, R.W. Sky And Telescope vol.91, no.6, p.38 (1996) Henry, G.W. IAPPP Communication No.57, Autumn 1994, p.57

  15. Diffractive X-Ray Telescopes

    Science.gov (United States)

    Skinner, Gerald K.

    2010-01-01

    Diffractive X-ray telescopes, using zone plates, phase Fresnel lenses, or related optical elements have the potential to provide astronomers with true imaging capability with resolution many orders of magnitude better than available in any other waveband. Lenses that would be relatively easy to fabricate could have an angular resolution of the order of micro-arc-seconds or even better, that would allow, for example, imaging of the distorted spacetime in the immediate vicinity of the super-massive black holes in the center of active galaxies. What then is precluding their immediate adoption? Extremely long focal lengths, very limited bandwidth, and difficulty stabilizing the image are the main problems. The history, and status of the development of such lenses is reviewed here and the prospects for managing the challenges that they present are discussed.

  16. Space Telescope Science Institute Symposium

    CERN Document Server

    Unsolved Problems in Stellar Evolution

    2000-01-01

    This timely volume reviews recent progress in our understanding of all aspects of stellar structure and evolution, with special emphasis on currently unsolved problems. It covers every stage in the life of a star, from birth to death, as well as the fundamental processes that affect stellar evolution. Each chapter is written by a leading world expert, based on presentations at an international conference held at the Space Telescope Science Institute. A complete understanding of stellar evolution is important in its own right, constituting a vital piece in the more general puzzle of understanding how galaxies form and evolve. This volume presents the most comprehensive and up-to-date survey available of this crucial topic in astrophysics.

  17. Adaptive Optics for Large Telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Olivier, S

    2008-06-27

    The use of adaptive optics was originally conceived by astronomers seeking to correct the blurring of images made with large telescopes due to the effects of atmospheric turbulence. The basic idea is to use a device, a wave front corrector, to adjust the phase of light passing through an optical system, based on some measurement of the spatial variation of the phase transverse to the light propagation direction, using a wave front sensor. Although the original concept was intended for application to astronomical imaging, the technique can be more generally applied. For instance, adaptive optics systems have been used for several decades to correct for aberrations in high-power laser systems. At Lawrence Livermore National Laboratory (LLNL), the world's largest laser system, the National Ignition Facility, uses adaptive optics to correct for aberrations in each of the 192 beams, all of which must be precisely focused on a millimeter scale target in order to perform nuclear physics experiments.

  18. Can Radio Telescopes Find Axions?

    Science.gov (United States)

    Kohler, Susanna

    2017-08-01

    axions. Now scientists Katharine Kelley and Peter Quinn at ICRAR, University of Western Australia, have explored how we might use next-generation radio telescopes to search for photons that were created by axions interacting with the magnetic fields of our galaxy.Hope for Next-Gen TelescopesPotential axion coupling strengths vs. mass (click for a closer look). The axion mass is thought to lie between a eV and a meV; two theoretical models are shown with dashed lines. The plot shows the sensitivity of the upcoming SKA and its precursors, ASKAP and MEERKAT. [KelleyQuinn 2017]By using a simple galactic halo model and reasonable assumptions for the central galactic magnetic field even taking into account the time dependence of the field Kelley and Quinn estimate the radio-frequency power density that we would observe at Earth from axions being converted to photons within the Milky Ways magnetic field.The authors then compare this signature to the detection capabilities of upcoming radio telescope arrays. They show that the upcoming Square Kilometer Array and its precursors should have the capability to detect signs of axions across large parts of parameter space.Kelley and Quinn conclude that theres good cause for optimism about future radio telescopes ability to detect axions. And if we did succeed in making a detection, it would be a triumph for both particle physics and astrophysics, finally providing an explanation for the universes dark matter.CitationKatharine Kelley and P. J. Quinn 2017 ApJL 845 L4. doi:10.3847/2041-8213/aa808d

  19. SLAC Cosmic Ray Telescope Facility

    Energy Technology Data Exchange (ETDEWEB)

    Va' vra, J.

    2010-02-15

    SLAC does not have a test beam for the HEP detector development at present. We have therefore created a cosmic ray telescope (CRT) facility, which is presently being used to test the FDIRC prototype. We have used it in the past to debug this prototype with the original SLAC electronics before going to the ESA test beam. Presently, it is used to test a new waveform digitizing electronics developed by the University of Hawaii, and we are also planning to incorporate the new Orsay TDC/ADC electronics. As a next step, we plan to put in a full size DIRC bar box with a new focusing optics, and test it together with a final SuberB electronics. The CRT is located in building 121 at SLAC. We anticipate more users to join in the future. This purpose of this note is to provide an introductory manual for newcomers.

  20. Bent Telescopic Rods in Patients With Osteogenesis Imperfecta.

    Science.gov (United States)

    Lee, R Jay; Paloski, Michael D; Sponseller, Paul D; Leet, Arabella I

    2016-09-01

    Telescopic rods require alignment of 2 rods to enable lengthening. A telescopic rod converts functionally into a solid rod if either rod bends, preventing proper engagement. Our goal was to characterize implant bending as a mode of failure of telescopic rods used in the treatment of osteogenesis imperfecta in children. We conducted a retrospective review of our osteogenesis imperfecta database for patients treated with intramedullary telescopic rods at our institution from 1992 through 2010 and identified 12 patients with bent rods. The 6 boys and 6 girls had an average age at the time of initial surgery of 3.1 years (range, 1.8 to 8.3 y) and a total of 51 telescoping rods. Clinic notes, operative reports, and radiographs were reviewed. The rods were analyzed for amount of lengthening, characteristics of bending, presence of cut out, or disengagement from an anchor point. Bends in the rods were characterized by their location on the implant component. The bent and straight rods were compared. Data were analyzed with the Mann-Whitney test (statistical significance set at P≤0.05). Of the 51 telescoping rods, 17 constructs (33%) bent. The average interval between surgery and rod bending was 4.0 years (range, 0.9 to 8.2 y). Before bending, 11 of 17 telescoping rods had routine follow-up radiographs for review. In 10 of the rods, bending was present when early signs of rod failure were first detected. Rod bending did not seem to be related to rod size. There was no area on the rod itself that seemed more susceptible to bending. Rod bending can be an early sign of impending rod failure. When rod bending is first noted, it may predispose the rod to other subsequent failures such as loss of proximal and distal fixation and cut out. Rod bending should be viewed as an indicator for closer monitoring of the patient and discussions regarding future need for rod exchange. Level III-retrospective review.

  1. [A telescopic vertebral endoprosthesis for subaxial cervical fusion].

    Science.gov (United States)

    Nekhlopochin, A S; Shvets, A I; Nekhlopochin, S N

    2016-01-01

    The study purpose was to develop an anterior subaxial cervical fusion technique using a new telescopic vertebral graft (VG) construction and to introduce the technique into clinical practice. We analyzed existing VG constructions used in anterior interbody fusion at the cervical spine level and developed our own variant of a vertical, cylindrical, telescopic, mesh, vertebral endoprosthesis as well as a technique of its placement to replace bodies of the cervical vertebrae. The technique was used in 11 patients with spinal trauma. The orthopedic and neurological status and outcomes of surgical treatment were assessed using ASIA/IMSOP, Odom, and VAS scales. The first cases of replacement of a resected vertebra by the proposed construction indicate the advisability of using this VG to restore the sagittal profile, stabilize the operated spinal motion segment, and create conditions for the formation of an adequate supporting bone block. The graft construction can be filled with a significant amount of a filler and makes it possible to add and tighten the filler after placing the graft into the operating position. The study demonstrated the construct efficacy. No postoperative complications associated with the use and placement of the telescopic constructions was observed.

  2. Proxy magnetometry with the Dutch Open Telescope

    NARCIS (Netherlands)

    Rutten, R.J.; Hammerschlag, R.H.; Sütterlin, P.; Bettonvil, F.C.M.

    1999-01-01

    Superb movies from the Dutch Open Telescope (DOT) on La Palma have proven the validity of the open concept of this innovative telescope for high-resolution imaging of the solar atmosphere. A five- camera speckle-burst registration system is being installed that should permit consistent and

  3. Solar Magnetometry with the dutch open telescope

    NARCIS (Netherlands)

    Rutten, R.J.; Hammerschlag, R.H.; Sütterlin, P.; Bettonvil, F.C.M.; Zalm, E.B.J. van der

    2001-01-01

    The Dutch Open Telescope (DOT) has become op- erational at the Roque de los Muchachos Observa- tory on La Palma. The rst image sequences taken with this innovative telescope demonstrate its capa- bility for tomographic high-resolution imaging of the magnetic topology of the solar atmosphere up

  4. Reverse Galilean telescopic spectacles in unilateral aphakia.

    Science.gov (United States)

    Krefman, R A

    1981-09-01

    Minimizing aniseikonia in unilateral aphakia is often a difficult task. A case is presented in which a patient preferred a reverse Galilean telescopic spectacle of his own design to a contact lens. The design of the spectacles and the patient's visual performance with them are described. A reverse Galilean telescopic spectacle should not be excluded from the therapeutic alternatives in unilateral aphakia.

  5. Herschel SPIRE FTS telescope model correction

    Science.gov (United States)

    Hopwood, Rosalind; Fulton, Trevor; Polehampton, Edward T.; Valtchanov, Ivan; Benielli, Dominique; Imhof, Peter; Lim, Tanya; Lu, Nanyao; Marchili, Nicola; Pearson, Chris P.; Swinyard, Bruce M.

    2014-07-01

    Emission from the Herschel telescope is the dominant source of radiation for the majority of SPIRE Fourier transform spectrometer (FTS) observations, despite the exceptionally low emissivity of the primary and secondary mirrors. Accurate modelling and removal of the telescope contribution is, therefore, an important and challenging aspect of FTS calibration and data reduction pipeline. A dust-contaminated telescope model with time invariant mirror emissivity was adopted before the Herschel launch. However, measured FTS spectra show a clear evolution of the telescope contribution over the mission and strong need for a correction to the standard telescope model in order to reduce residual background (of up to 7 Jy) in the final data products. Systematic changes in observations of dark sky, taken over the course of the mission, provide a measure of the evolution between observed telescope emission and the telescope model. These dark sky observations have been used to derive a time dependent correction to the telescope emissivity that reduces the systematic error in the continuum of the final FTS spectra to ˜0.35 Jy.

  6. Radio Telescopes "Save the Day," Produce Data on Titan's Winds

    Science.gov (United States)

    2005-02-01

    measurements were carried out and processed jointly by scientists from the NASA Jet Propulsion Laboratory (JPL, USA), and the Joint Institute for VLBI in Europe (JIVE, The Netherlands) working within an international Doppler Wind Experiment team. The GBT made the first detection of Huygens' radio signal during the descent, and gave flight controllers and scientists the first indication that the spacecraft's parachute had deployed and that it was "alive" after entering Titan's atmosphere. The radio-telescope measurements also indicated changes in Huygens' speed when it exchanged parachutes and when it landed on Titan's surface. The original plan for gauging Titan's winds called for measuring the Doppler shift in the probe's signal frequency both by Cassini and by ground-based radio telescopes in the U.S., Australia, Japan and China. Cassini was best positioned to gain information on the east-west component of the winds, and the ground-based telescopes were positioned to help learn about the north-south wind component. Unfortunately, the communications error lost all the wind data from Cassini. The VLBA The VLBA CREDIT: NRAO/AUI/NSF (Click on image for VLBA gallery) "I've never felt such exhilarating highs and dispiriting lows than those experienced when we first detected the signal from the GBT, indicating 'all's well,' and then discovering that we had no signal at the operations center, indicating 'all's lost.' The truth, as we have now determined, lies somewhat closer to the former than the latter." said Michael Bird of the University of Bonn. In addition to measuring the motion-generated frequency shift of Huygens' radio signal, radio telescopes also were used to make extremely precise measurements of the probe's position (to within three-quarters of a mile, or one kilometer) during its descent. This experiment used the VLBA antennas, along with others employing the technique of Very Long Baseline Interferometry (VLBI). Combination of the Doppler and VLBI data will

  7. Launch Will Create a Radio Telescope Larger than Earth

    Science.gov (United States)

    . This includes the National Science Foundation's Very Long Baseline Array (VLBA), an array of 10 telescopes spanning the United States from Hawaii to Saint Croix; NASA's Deep Space Network (DSN) sites in California, Spain, and Australia; the European VLBI Network, more than a dozen telescopes ranging from the United Kingdom to China; a Southern Hemisphere array of telescopes stretching from eastern Australia to South Africa; and Japan's network of domestic radio telescopes. In the United States, NASA is funding critical roles in the VSOP mission at both JPL and NRAO. JPL has built an array of three new tracking stations at its DSN sites in Goldstone, CA; Madrid, Spain; and near Canberra, Australia. A large existing tracking station at each of these sites has also been converted to an extremely sensitive radio telescope for simultaneous observations with the satellite. JPL also is providing precision orbit determination, scientific and operational planning support to the Japanese, and advice to U.S. astronomers who wish to observe with the satellite. NRAO is building a new tracking station at Green Bank, WV; contributing observing time on the VLBA array of telescopes; modifying existing data analysis hardware and software, and aiding astronomers with the analysis of the VSOP data. Much of the observational data will be processed at NRAO's facility in Socorro, NM, using the VLBA Correlator, a special purpose high-performance computer designed to process VLBI data. VSOP is the culmination of many years of planning and work by scientists and engineers around the world. Tests using NASA's Tracking and Data Relay Satellite System (TDRSS) proved the feasibility of space VLBI in 1986. Just last year, those old data were used again to test successfully the data-reduction facilities for VSOP. JPL manages the U.S. Space Very Long Baseline Interferometry project for NASA's Office of Space Science, Washington, DC. The VLBA, headquartered in Socorro, NM, is part of the National Radio

  8. The James Webb Space Telescope: Contamination Control and Materials

    Science.gov (United States)

    Stewart, Elaine M.; Wooldridge, Eve M.

    2017-01-01

    The James Webb Space Telescope (JWST), expected to launch in 2018 or early 2019, will be the premier observatory for astronomers worldwide. It is optimized for infrared wavelengths and observation from up to 1 million miles from Earth. JWST includes an Integrated Science Instrument Module (ISIM) containing the four main instruments used to observe deep space: Near-Infrared Camera (NIRCam), Near-Infrared Spectrograph (NIRSpec), Mid-Infrared Instrument (MIRI), and Fine Guidance Sensor/Near InfraRed Imager and Slitless Spectrograph (FGS/NIRISS). JWST is extremely sensitive to contamination directly resulting in degradation in performance of the telescope. Contamination control has been an essential focus of this mission since the beginning of this observatory. A particular challenge has been contamination challenges in vacuum chamber operations.

  9. Simulation and Track Reconstruction for Beam Telescopes

    CERN Document Server

    Maqbool, Salman

    2017-01-01

    Beam telescopes are an important tool to test new detectors under development in a particle beam. To test these novel detectors and determine their properties, the particle tracks need to be reconstructed from the known detectors in the telescope. Based on the reconstructed track, its predicted position on the Device under Test (DUT) are compared with the actual hits on the DUT. Several methods exist for track reconstruction, but most of them do not account for the effects of multiple scattering. General Broken Lines is one such algorithm which incorporates these effects during reconstruction. The aim of this project was to simulate the beam telescope and extend the track reconstruction framework for the FE-I4 telescope, which takes these effects into account. Section 1 introduces the problem, while section 2 focuses on beam telescopes. This is followed by the Allpix2 simulation framework in Section 3. And finally, Section 4 introduces the Proteus track reconstruction framework along with the General Broken ...

  10. Remote secure observing for the Faulkes Telescopes

    Science.gov (United States)

    Smith, Robert J.; Steele, Iain A.; Marchant, Jonathan M.; Fraser, Stephen N.; Mucke-Herzberg, Dorothea

    2004-09-01

    Since the Faulkes Telescopes are to be used by a wide variety of audiences, both powerful engineering level and simple graphical interfaces exist giving complete remote and robotic control of the telescope over the internet. Security is extremely important to protect the health of both humans and equipment. Data integrity must also be carefully guarded for images being delivered directly into the classroom. The adopted network architecture is described along with the variety of security and intrusion detection software. We use a combination of SSL, proxies, IPSec, and both Linux iptables and Cisco IOS firewalls to ensure only authenticated and safe commands are sent to the telescopes. With an eye to a possible future global network of robotic telescopes, the system implemented is capable of scaling linearly to any moderate (of order ten) number of telescopes.

  11. Accelerated Evolution of the Lyα Luminosity Function at z >~ 7 Revealed by the Subaru Ultra-deep Survey for Lyα Emitters at z = 7.3

    Science.gov (United States)

    Konno, Akira; Ouchi, Masami; Ono, Yoshiaki; Shimasaku, Kazuhiro; Shibuya, Takatoshi; Furusawa, Hisanori; Nakajima, Kimihiko; Naito, Yoshiaki; Momose, Rieko; Yuma, Suraphong; Iye, Masanori

    2014-12-01

    We present the ultra-deep Subaru narrowband imaging survey for Lyα emitters (LAEs) at z = 7.3 in the Subaru/XMM-Newton Deep Survey (SXDS) and Cosmic Evolution Survey (COSMOS) fields (~0.5 deg2) with a total integration time of 106 hr. Exploiting our new sharp bandwidth filter, NB101, installed on the Suprime-Cam, we have reached L(Lyα) = 2.4 × 1042 erg s-1 (5σ) for z = 7.3 LAEs, about four times deeper than previous Subaru z >~ 7 studies, which allows us to reliably investigate the evolution of the Lyα luminosity function (LF) for the first time down to the luminosity limit same as those of Subaru z = 3.1-6.6 LAE samples. Surprisingly, we only find three and four LAEs in the SXDS and COSMOS fields, respectively, while one expects a total of ~65 LAEs by our survey in the case of no Lyα LF evolution from z = 6.6 to 7.3. We identify a decrease of the Lyα LF from z = 6.6 to 7.3 at the >90% confidence level from our z = 7.3 Lyα LF with the best-fit Schechter parameters of L*{Lyα } = 2.7+8.0-1.2 × 1042 {erg} {s}-1 and φ * = 3.7+17.6-3.3 × 10-4 {Mpc}-3 for a fixed α = -1.5. Moreover, the evolution of the Lyα LF is clearly accelerated at z > 6.6 beyond the measurement uncertainties including cosmic variance. Because no such accelerated evolution of the UV-continuum LF or the cosmic star formation rate (SFR) is found at z ~ 7, but suggested only at z > 8, this accelerated Lyα LF evolution is explained by physical mechanisms different from a pure SFR decrease but related to the Lyα production and escape in the process of cosmic reionization. Because a simple accelerating increase of intergalactic medium neutral hydrogen absorbing Lyα cannot be reconciled with Thomson scattering of optical depth measurements from WMAP and Planck, our findings may support new physical pictures suggested by recent theoretical studies, such as the existence of HI clumpy clouds within cosmic ionized bubbles that are selectively absorbing Lyα and the large ionizing photon escape

  12. Improvements to science operations at Kitt Peak National Observatory

    Science.gov (United States)

    Bohannan, Bruce

    1998-07-01

    In recent years Kitt Peak National Observatory has undertaken a number of innovative projects to optimize science operations with the suite of telescopes we operate on Kitt Peak, Arizona. Changing scientific requirements and expectations of our users, evolving technology and declining budgets have motivated the changes. The operations improvements have included telescope performance enhancements--with the focus on the Mayall 4-m--modes of observing and scheduling, telescope control and observing systems, planning and communication, and data archiving.

  13. Southern Fireworks above ESO Telescopes

    Science.gov (United States)

    1999-05-01

    New Insights from Observations of Mysterious Gamma-Ray Burst International teams of astronomers are now busy working on new and exciting data obtained during the last week with telescopes at the European Southern Observatory (ESO). Their object of study is the remnant of a mysterious cosmic explosion far out in space, first detected as a gigantic outburst of gamma rays on May 10. Gamma-Ray Bursters (GRBs) are brief flashes of very energetic radiation - they represent by far the most powerful type of explosion known in the Universe and their afterglow in optical light can be 10 million times brighter than the brightest supernovae [1]. The May 10 event ranks among the brightest one hundred of the over 2500 GRB's detected in the last decade. The new observations include detailed images and spectra from the VLT 8.2-m ANTU (UT1) telescope at Paranal, obtained at short notice during a special Target of Opportunity programme. This happened just over one month after that powerful telescope entered into regular service and demonstrates its great potential for exciting science. In particular, in an observational first, the VLT measured linear polarization of the light from the optical counterpart, indicating for the first time that synchrotron radiation is involved . It also determined a staggering distance of more than 7,000 million light-years to this GRB . The astronomers are optimistic that the extensive observations will help them to better understand the true nature of such a dramatic event and thus to bring them nearer to the solution of one of the greatest riddles of modern astrophysics. A prime example of international collaboration The present story is about important new results at the front-line of current research. At the same time, it is also a fine illustration of a successful collaboration among several international teams of astronomers and the very effective way modern science functions. It began on May 10, at 08:49 hrs Universal Time (UT), when the Burst

  14. Design of the STAR-X Telescope

    Science.gov (United States)

    Saha, Timo T.; Zhang, William W.; McClelland, Ryan S.

    2017-01-01

    Top-level science goals of the Survey and Time-domain Astrophysical Research eXplorer (STAR-X) include: investigations of most violent explosions in the universe, study of growth of black holes across cosmic time and mass scale, and measure how structure formation heats majority of baryons in the universe. To meet these goals, the field-of-view of the telescope should be about 1 square-degree, the angular resolution should be 5 arc-seconds or below across large part of the field-of-view. The on-axis effective area at 1 KeV should be about 2,000 sq cm. Payload cost and launch considerations limit the outer diameter, focal length, and mass to 1.3 meters, 5 meters, and 250 kilograms, respectively. Telescope design is based on a segmented meta-shell approach we have developed at Goddard Space Flight Center for the STAR-X telescope. The telescope shells are divided into 30-degree segments. Individual telescopes and meta-shells are nested inside each other to meet the effective area requirements in 0.5 - 6.0 KeV range. We consider Wolter-Schwarzschild, and Modified-Wolter-Schwarzschild telescope designs as basic building blocks of the nested STAR-X telescope. These designs offer an excellent resolution over a large field of views. Nested telescopes are vulnerable to stray light problems. We have designed a multi-component baffle system to eliminate direct and single-reflection light paths inside the telescopes. Large number of internal and external baffle vane structures are required to prevent stray rays from reaching the focal plane. We have developed a simple ray-trace based tool to determine the dimensions and locations of the baffles. In this paper, we present the results of our trade studies, baffle design studies, and optical performance analyses of the STAR-X telescope.

  15. An Ultra Low Cost Synthetic Tracking Telescope for Detecting NEOs

    Science.gov (United States)

    Shao, Michael

    2018-01-01

    For the last decade or so, two NEO search facilities (Catalina and Panstarrs) have been responsible for the vast majority of newly discovered NEOs. It would seem that amatuer astronomers, who once played a significant role in finding NEOs now play an progressivly smaller role in the ground based discovery of NEOs. In the not too distant future LSST will become operational and further increase the NEO discovery capability. Synthetic tracking is a technique that uses high speed low noise cameras along with teraflop processing in GPUs, to enable high sensitivity searches for moving objects using small telescopes. Here we describe a two telescope cluster made of 15 cm telescopes with amatuer astronomy cmos detectors, that would have a combined 8 sqdeg FOV and a limiting magnitude near 21.0 mag when placed at a "very" dark site (21.6mag/arcsec^2). Simulations of what this telescope cluster can detect using the Granvik population of NEOs, indicate that this would detect on average ~2.2 NEOs per 8hr night. Because the sensitivity is significantly reduced when the moon is up, the expected annual yield would be ~300. While this is ~20% of the 1400 new NEOs discovered every year, if 50 amatuer astronomers built such systems it would significantly increase the total discovery rate. We expect to have one such system operational by end of 2017 and will present preliminary results from that system, and compare it to the simulation results. A onstellation these very low cost cameras can eventually be placed in space also at very low cost.

  16. Wide-Field Imaging Telescope-0 (WIT0) with automatic observing system

    Science.gov (United States)

    Ji, Tae-Geun; Byeon, Seoyeon; Lee, Hye-In; Park, Woojin; Lee, Sang-Yun; Hwang, Sungyong; Choi, Changsu; Gibson, Coyne Andrew; Kuehne, John W.; Prochaska, Travis; Marshall, Jennifer L.; Im, Myungshin; Pak, Soojong

    2018-01-01

    We introduce Wide-Field Imaging Telescope-0 (WIT0), with an automatic observing system. It is developed for monitoring the variabilities of many sources at a time, e.g. young stellar objects and active galactic nuclei. It can also find the locations of transient sources such as a supernova or gamma-ray bursts. In 2017 February, we installed the wide-field 10-inch telescope (Takahashi CCA-250) as a piggyback system on the 30-inch telescope at the McDonald Observatory in Texas, US. The 10-inch telescope has a 2.35 × 2.35 deg field-of-view with a 4k × 4k CCD Camera (FLI ML16803). To improve the observational efficiency of the system, we developed a new automatic observing software, KAOS30 (KHU Automatic Observing Software for McDonald 30-inch telescope), which was developed by Visual C++ on the basis of a windows operating system. The software consists of four control packages: the Telescope Control Package (TCP), the Data Acquisition Package (DAP), the Auto Focus Package (AFP), and the Script Mode Package (SMP). Since it also supports the instruments that are using the ASCOM driver, the additional hardware installations become quite simplified. We commissioned KAOS30 in 2017 August and are in the process of testing. Based on the WIT0 experiences, we will extend KAOS30 to control multiple telescopes in future projects.

  17. Intercontinental network control platform and robotic observation for Chinese Antarctic telescopes

    Science.gov (United States)

    Xu, Lingzhe

    2012-09-01

    The Chinese astronomical exploration in Antarctic region has been initialized and stepped forward. The R&D roadmap in this regard identifies each progressive step. For the past several years China has set up Kunlun station at Antarctic Dome-A, and Chinese Small Telescope ARray (CSTAR) has already been up and running regularly. In addition, Antarctic Schmidt Telescopes (AST3_1) was transported to the area in the year of 2011 and has recently been placed in service for some time and followed with telescopes in larger size predictably more to come. Antarctic region is one of a few best sites left on the Earth for astronomical telescope observation, yet with worst fundamental living conditions for human survival and activities. To meet such a tough challenge it is essential to establish an efficient and reliable means of remote access for telescope routine observation. This paper outlines the remote communication for CSTAR and AST3_1, and further proposes an intercontinental network control platform for Chinese Antarctic telescope array with remote full-automatic control and robotic observation and management. A number of technical issues for telescope access such as the unattended operation, the bandwidth based on iridium satellite transmission as well as the means of reliable and secure communication among other things are all reviewed and further analyzed.

  18. Radio Telescopes Will Add to Cassini-Huygens Discoveries

    Science.gov (United States)

    2004-12-01

    telescopes in Parkes, Mopra, and Ceduna, Australia; Hobart, Tasmania; Urumqi and Shanghai, China; and Kashima, Japan. The positional measurements are a project led by JIVE and involving ESA, the Netherlands Foundation for Research in Astronomy, the University of Bonn, Helsinki University of Technology, JPL, the Australia Telescope National Facility, the National Astronomical Observatories of China, the Shanghai Astronomical Observatory, and the National Institute for Communication Technologies in Kashima, Japan. The Joint Institute for VLBI in Europe is funded by the national research councils, national facilities and institutes of The Netherlands (NWO and ASTRON), the United Kingdom (PPARC), Italy (CNR), Sweden (Onsala Space Observatory, National Facility), Spain (IGN) and Germany (MPIfR). The European VLBI Network is a joint facility of European, Chinese, South African and other radio astronomy institutes funded by their national research councils. The Australia Telescope is funded by the Commonwealth of Australia for operation as a National Facility managed by CSIRO. The National Radio Astronomy Observatory is a facility of the National Science Foundation, operated under cooperative agreement by Associated Universities, Inc.

  19. The NASA Meter Class Autonomous Telescope: Ascension Island

    Science.gov (United States)

    Lederer, S.; Stansbery, E. G.; Cowardin, H. M.; Kervin, P.; Hickson, P.

    2013-09-01

    The Meter Class Autonomous Telescope (MCAT) is the newest optical sensor dedicated to NASA's mission to characterize the space debris environment. It is the successor to a series of optical telescopes developed and operated by the JSC Orbital Debris Program Office (ODPO) to monitor and assess the debris environment in (1) Low Earth Orbit (LEO), (2) Medium Earth Orbit (MEO), and (3) Geosynchronous Orbit (GEO), with emphasis on LEO and GEO altitudes. A joint NASA-Air Force Research Labs project, MCAT is a 1.3m optical telescope dedicated to debris research. Its optical path and sensor yield a large survey fence at the cutting edge of current detector performance. It has four primary operational observing modes, two of which were not computationally feasible a decade ago. Operations are supported by a sophisticated software suite that monitors clouds and weather conditions, and controls everything from data collection to dome rotation to processing tens of GB of imagery data nightly. With fainter detection limits, precision detection, acquisition and tracking of targets, multi-color photometry, precision astrometry, automated re-acquisition capability, and the ability to process all data at the acquisition rate, MCAT is capable of producing and processing a volume and quality of data far in excess of any current (or prior) ODPO operations. This means higher fidelity population inputs and eliminating the multi-year backlog from acquisition-to-product typical of optical campaigns. All of this is possible given a suitable observing location. Originally planned for the island of Legan, part of the Kwajalein Atoll Islands, recent developments have led to a change in venue. Specifically, the Ground-based Electro-Optical Deep Space Surveillance, or GEODSS, System of telescopes is the United States' major tracking system for deep space. This network consists of telescopes in Maui, Hawaii; Diego Garcia (Indian Ocean), and Socorro, New Mexico. A fourth optical telescope, though

  20. VLTI First Fringes with Two Auxiliary Telescopes at Paranal

    Science.gov (United States)

    2005-03-01

    World's Largest Interferometer with Moving Optical Telescopes on Track Summary The Very Large Telescope Interferometer (VLTI) at Paranal Observatory has just seen another extension of its already impressive capabilities by combining interferometrically the light from two relocatable 1.8-m Auxiliary Telescopes. Following the installation of the first Auxiliary Telescope (AT) in January 2004 (see ESO PR 01/04), the second AT arrived at the VLT platform by the end of 2004. Shortly thereafter, during the night of February 2 to 3, 2005, the two high-tech telescopes teamed up and quickly succeeded in performing interferometric observations. This achievement heralds an era of new scientific discoveries. Both Auxiliary Telescopes will be offered from October 1, 2005 to the community of astronomers for routine observations, together with the MIDI instrument. By the end of 2006, Paranal will be home to four operational ATs that may be placed at 30 different positions and thus be combined in a very large number of ways ("baselines"). This will enable the VLTI to operate with enormous flexibility and, in particular, to obtain extremely detailed (sharp) images of celestial objects - ultimately with a resolution that corresponds to detecting an astronaut on the Moon. PR Photo 07a/05: Paranal Observing Platform with AT1 and AT2 PR Photo 07b/05: AT1 and AT2 with Open Domes PR Photo 07c/05: Evening at Paranal with AT1 and AT2 PR Photo 07d/05: AT1 and AT2 under the Southern Sky PR Photo 07e/05: First Fringes with AT1 and AT2 PR Video Clip 01/05: Two ATs at Paranal (Extract from ESO Newsreel 15) A Most Advanced Device ESO PR Video 01/05 ESO PR Video 01/05 Two Auxiliary Telescopes at Paranal [QuickTime: 160 x 120 pix - 37Mb - 4:30 min] [QuickTime: 320 x 240 pix - 64Mb - 4:30 min] ESO PR Photo 07a/05 ESO PR Photo 07a/05 [Preview - JPEG: 493 x400 pix - 44k] [Normal - JPEG: 985 x 800 pix - 727k] [HiRes - JPEG: 5000 x 4060 pix - 13.8M] Captions: ESO PR Video Clip 01/05 is an extract from

  1. Parametric cost models for space telescopes

    Science.gov (United States)

    Stahl, H. Philip; Henrichs, Todd; Dollinger, Courtnay

    2017-11-01

    Multivariable parametric cost models for space telescopes provide several benefits to designers and space system project managers. They identify major architectural cost drivers and allow high-level design trades. They enable cost-benefit analysis for technology development investment. And, they provide a basis for estimating total project cost. A survey of historical models found that there is no definitive space telescope cost model. In fact, published models vary greatly [1]. Thus, there is a need for parametric space telescopes cost models. An effort is underway to develop single variable [2] and multi-variable [3] parametric space telescope cost models based on the latest available data and applying rigorous analytical techniques. Specific cost estimating relationships (CERs) have been developed which show that aperture diameter is the primary cost driver for large space telescopes; technology development as a function of time reduces cost at the rate of 50% per 17 years; it costs less per square meter of collecting aperture to build a large telescope than a small telescope; and increasing mass reduces cost.

  2. The earliest telescope preserved in Japan

    Science.gov (United States)

    Nakamura, Tsuko

    2008-11-01

    This paper describes the antique telescope owned by one of Japan's major feudal warlords, Tokugawa Yoshinao. As he died in 1650, this means that this telescope was produced in or before that year. Our recent investigation of the telescope revealed that it is of Schyrlean type, consisting of four convex lenses, so that it gives erect images with a measured magnifying power of 3.9 (± 0.2-0.3). This also implies that Yoshinao's telescope could be one of the earliest Schyrlean telescopes ever. The design, fabrication technique, and the surface decoration of the telescopic tube and caps all suggest that it is not a Western make at all, but was produced probably under the guidance of a Chinese Jesuit missionary or by the Chinese, in Suzhou or Hangzhou in Zhejiang province, China, or in Nagasaki. Following descriptions in the Japanese and Chinese historical literature, we also discuss the possibility that production of Schyrlean-type telescopes started independently in the Far East nearly simultaneously with the publication of Oculus Enoch et Eliae by Anton Maria Schyrle in 1645.

  3. Parametric Cost Models for Space Telescopes

    Science.gov (United States)

    Stahl, H. Philip; Henrichs, Todd; Dollinger, Courtney

    2010-01-01

    Multivariable parametric cost models for space telescopes provide several benefits to designers and space system project managers. They identify major architectural cost drivers and allow high-level design trades. They enable cost-benefit analysis for technology development investment. And, they provide a basis for estimating total project cost. A survey of historical models found that there is no definitive space telescope cost model. In fact, published models vary greatly [1]. Thus, there is a need for parametric space telescopes cost models. An effort is underway to develop single variable [2] and multi-variable [3] parametric space telescope cost models based on the latest available data and applying rigorous analytical techniques. Specific cost estimating relationships (CERs) have been developed which show that aperture diameter is the primary cost driver for large space telescopes; technology development as a function of time reduces cost at the rate of 50% per 17 years; it costs less per square meter of collecting aperture to build a large telescope than a small telescope; and increasing mass reduces cost.

  4. Buried plastic scintillator muon telescope

    Science.gov (United States)

    Sanchez, F.; Medina-Tanco, G.A.; D'Olivo, J.C.; Paic, G.; Patino Salazar, M.E.; Nahmad-Achar, E.; Valdes Galicia, J.F.; Sandoval, A.; Alfaro Molina, R.; Salazar Ibarguen, H.; Diozcora Vargas Trevino, M.A.; Vergara Limon, S.; Villasenor, L.M.

    Muon telescopes can have several applications, ranging from astrophysical to solar-terrestrial interaction studies, and fundamental particle physics. We show the design parameters, characterization and end-to-end simulations of a detector composed by a set of three parallel dual-layer scintillator planes, buried at fix depths ranging from 0.30 m to 3 m. Each layer is 4 m2 and is composed by 50 rectangular pixels of 4cm x 2 m, oriented at a 90 deg angle with respect to its companion layer. The scintillators are MINOS extruded polystyrene strips with two Bicron wavelength shifting fibers mounted on machined grooves. Scintillation light is collected by multi-anode PMTs of 64 pixels, accommodating two fibers per pixel. The front-end electronics has a time resolution of 7.5 nsec. Any strip signal above threshold opens a GPS-tagged 2 micro-seconds data collection window. All data, including signal and background, are saved to hard disk. Separation of extensive air shower signals from secondary cosmic-ray background muons and electrons is done offline using the GPS-tagged threefold coincidence signal from surface water cerenkov detectors located nearby in a triangular array. Cosmic-ray showers above 6 PeV are selected. The data acquisition system is designed to keep both, background and signals from extensive air showers for a detailed offline data.

  5. The Origins Space Telescope (OST)

    Science.gov (United States)

    Staguhn, Johannes

    2018-01-01

    The Origins Space Telescope is the mission concept for the Far-Infrared Surveyor, one of the four science and technology definition studies to be submitted by NASA Headquarters to the 2020 Astronomy and Astrophysics Decadal survey. The observatory will provide orders of magnitude improvements in sensitivity over prior missions, in particular for spectroscopy, enabling breakthrough science across astrophysics. The observatory will cover a wavelength range between 5 μm and 600 μm in order to enable the study of the formation of proto-planetary disks, detection of bio-signatures from extra-solar planet's atmospheres, characterization of the first galaxies in the universe, and many more. The five instruments that are currently studied are two imaging far-infrared spectrometers using incoherent detectors, providing up to R 10^5 spectral resolution, one far-infrared infrared heterodyne instrument for even higher spectral resolving powers, one far-infrared continuum imager and polarimeter, plus a mid-infrared coronagraph with imaging and spectroscopy mode. I will describe the scientific and technical capabilities of the observatory with focus on the expected synergies with AtLAST.

  6. The image camera of the 17 m diameter air Cherenkov telescope MAGIC

    CERN Document Server

    Ostankov, A P

    2001-01-01

    The image camera of the 17 m diameter MAGIC telescope, an air Cherenkov telescope currently under construction to be installed at the Canary island La Palma, is described. The main goal of the experiment is to cover the unexplored energy window from approx 10 to approx 300 GeV in gamma-ray astrophysics. In its first phase with a classical PMT camera the MAGIC telescope is expected to reach an energy threshold of approx 30 GeV. The operational conditions, the special characteristics of the developed PMTs and their use with light concentrators, the fast signal transfer scheme using analog optical links, the trigger and DAQ organization as well as image reconstruction strategy are described. The different paths being explored towards future camera improvements, in particular the constraints in using silicon avalanche photodiodes and GaAsP hybrid photodetectors in air Cherenkov telescopes are discussed.

  7. Implementation of a configurable FE-I4 trigger plane for the AIDA telescope

    Energy Technology Data Exchange (ETDEWEB)

    Obermann, Theresa; Marinas, Carlos; Huegging, Fabian; Backhaus, Malte; Luetticke, Florian; Krueger, Hans; Schwartzkopff, Fabian; Wermes, Norbert [Physikalisches Institut, Universitaet Bonn (Germany)

    2013-07-01

    To evaluate the performance of detector prototypes belonging to different sensor technologies, a fast read-out reference device (AIDA telescope) with excellent resolution and modular configuration is required. The successful development of a telescope with these characteristics was part of the EUDET project, currently continued within the framework of the AIDA activity. The addition of a FE-I4-based reference plane to the existing telescope configuration allows the implementation of a user-defined region-of-interest trigger window, tunable to match the area defined by the device under test (DUT). Such a flexible setup is implemented and the proof of principle is demonstrated while operating a DEPFET pixel sensor as DUT in between the two telescope arms. Results are shown in the talk.

  8. Capabilities and Present Status of The Sicaya Radio Telescope in Peru

    Science.gov (United States)

    Ishitsuka, J. K.; Kobayashi, H.; Miyoshi, M.

    2017-07-01

    The private telephone company, Telefónica del Perú, stopped operations of the Sicaya Intelsat Station in 2000, we knew that they were looking for some institution to own the Station in 2002 and begun conversations. Finally in 2008, the whole communications station with a 32-meters parabolic antenna was donated to the Geophysical Institute of Peru. Many things have happened since that, but finally we are almost ready to have a radio telescope. National Astronomical Observatory of Japan contributed enormously to set up the radio telescope. Initially as a single dish radio telescope, it will observe methanol maser at 6.7 GHz of young stellar objects. In the near future, equipping for VLBI observations is in the scope. Sicaya is situated on the central part of Peru at 3,370 meters of altitude and the weather is benign for radio astronomical observations, also humidity is low and allows have radio telescopes free of rust.

  9. The EEE Project: a sparse array of telescopes for the measurement of cosmic ray muons

    Science.gov (United States)

    La Rocca, P.; Abbrescia, M.; Avanzini, C.; Baldini, L.; Baldini Ferroli, R.; Batignani, G.; Bencivenni, G.; Bossini, E.; Chiavassa, A.; Cicalò, C.; Cifarelli, L.; Coccetti, F.; Coccia, E.; Corvaglia, A.; De Gruttola, D.; De Pasquale, S.; Di Giovanni, A.; D'Incecco, M.; Dreucci, M.; Fabbri, F. L.; Fattibene, E.; Ferraro, A.; Frolov, V.; Galeotti, P.; Garbini, M.; Gemme, G.; Gnesi, I.; Grazzi, S.; Gustavino, C.; Hatzifotiadou, D.; Liciulli, F.; Maggiora, A.; Maragoto Rodriguez, O.; Maron, G.; Martelli, B.; Mazziotta, M. N.; Miozzi, S.; Nania, R.; Noferini, F.; Nozzoli, F.; Panareo, M.; Panetta, M.; Paoletti, R.; Park, W.; Perasso, L.; Pilo, F.; Piragino, G.; Riggi, F.; Righini, G. C.; Rizzi, M.; Sartorelli, G.; Scapparone, E.; Schioppa, M.; Scribano, A.; Selvi, M.; Serci, S.; Siddi, E.; Squarcia, S.; Stori, L.; Taiuti, M.; Terreni, G.; Visnyei, O. B.; Vistoli, M. C.; Votano, L.; Williams, M. C. S.; Zani, S.; Zichichi, A.; Zuyeuski, R.

    2016-12-01

    The Extreme Energy Events (EEE) Project is meant to be the most extensive experiment to detect secondary cosmic particles in Italy. To this aim, more than 50 telescopes have been built at CERN and installed in high schools distributed all over the Italian territory. Each EEE telescope comprises three large area Multigap Resistive Plate Chambers (MRPCs) and is capable of reconstructing the trajectories of the charged particles traversing it with a good angular resolution. The excellent performance of the EEE telescopes allows a large variety of studies, from measuring the local muon flux in a single telescope, to detecting extensive air showers producing time correlations in the same metropolitan area, to searching for large-scale correlations between showers detected in telescopes tens, hundreds or thousands of kilometers apart. In addition to its scientific goal, the EEE Project also has an educational and outreach objective, its aim being to motivate young people by involving them directly in a real experiment. High school students and teachers are involved in the construction, testing and start-up of the EEE telescope in their school, then in its maintenance and data-acquisition, and later in the analysis of the data. During the last couple of years a great boost has been given to the EEE Project through the organization of simultaneous and centralized data taking with the whole telescope array. The raw data from all telescopes are transferred to CNAF (Bologna), where they are reconstructed and stored. The data are currently being analyzed, looking at various topics: variation of the rate of cosmic muons with time, upward going muons, muon lifetime, search for anisotropies in the muon angular distribution and for time coincidences between stations. In this paper an overall description of the experiment is given, including the design, construction and performance of the telescopes. The operation of the whole array is also presented by showing the most recent

  10. Telescoping cylindrical piezoelectric fiber composite actuator assemblies

    Science.gov (United States)

    Allison, Sidney G. (Inventor); Shams, Qamar A. (Inventor); Fox, Robert L. (Inventor); Fox, legal representative, Christopher L. (Inventor); Fox Chattin, legal representative, Melanie L. (Inventor)

    2010-01-01

    A telescoping actuator assembly includes a plurality of cylindrical actuators in a concentric arrangement. Each cylindrical actuator is at least one piezoelectric fiber composite actuator having a plurality of piezoelectric fibers extending parallel to one another and to the concentric arrangement's longitudinal axis. Each cylindrical actuator is coupled to concentrically-adjacent ones of the cylindrical actuators such that the plurality of cylindrical actuators can experience telescopic movement. An electrical energy source coupled to the cylindrical actuators applies actuation energy thereto to generate the telescopic movement.

  11. Radio Telescopes Reveal Youngest Stellar Corpse

    Science.gov (United States)

    2004-06-01

    Astronomers using a global combination of radio telescopes to study a stellar explosion some 30 million light-years from Earth have likely discovered either the youngest black hole or the youngest neutron star known in the Universe. Their discovery also marks the first time that a black hole or neutron star has been found associated with a supernova that has been seen to explode since the invention of the telescope nearly 400 years ago. M51 An artist's impression of Supernova 1986J. The newly discovered nebula around the black hole or neutron star in the center is shown in blue, and is in the center of the expanding, fragmented shell of material thrown off in the supernova explosion, which is shown in red. CREDIT: Norbert Bartel and Michael F. Bietenholz, York University; Artist: G. Arguner (Click on image for larger version) Image Files Artist's Conception (above image, 836K) Galaxy and Supernova (47K) A VLA image (left) of the galaxy NGC 891, showing the bright supernova explosion below the galaxy's center. At right, a closer view of the supernova, made with a global array of radio telescopes. CREDIT: Miguel A. Perez-Torres, Antxon Alberdi and Lucas Lara, Instituto de Astrofisica de Andalucia - CSIC, Spain, Jon Marcaide and Jose C. Guirado, Universidad de Valencia, Spain Franco Mantovani, IRA-CNR, Italy, Eduardo Ros, MPIfR, Germany, and Kurt W. Weiler, Naval Research Laboratory, USA Multi-Frequency Closeup View (201K) Blue and white area shows the nebula surrounding the black hole or neutron star lurking in the center of the supernova. This nebula is apparent at a higher radio frequency (15 GHz). The red and also the contours show the distorted, expanding shell of material thrown off in the supernova explosion. This shell is seen at a lower radio frequency (5 GHz). CREDIT: Michael F. Bietenholz and Norbert Bartel, York University, Michael Rupen, NRAO, NRAO/AUI/NSF A supernova is the explosion of a massive star after it exhausts its supply of nuclear fuel and

  12. The Timepix Telescope for high performance particle tracking

    Energy Technology Data Exchange (ETDEWEB)

    Akiba, K. [Federal University of Rio de Janeiro, Rio de Janeiro (Brazil); Ronning, P. [CERN, The European Organisation for Nuclear Research, Geneva (Switzerland); Beuzekom, M. van; Beveren, V. van [NIKHEF, Amsterdam (Netherlands); Borghi, S. [University of Manchester, Manchester, Lancashire (United Kingdom); Boterenbrood, H. [NIKHEF, Amsterdam (Netherlands); Buytaert, J.; Collins, P. [CERN, The European Organisation for Nuclear Research, Geneva (Switzerland); Dosil Suárez, A. [Universidade de Santiago de Compostela, Santiago de Compostela (Spain); Dumps, R. [CERN, The European Organisation for Nuclear Research, Geneva (Switzerland); Eklund, L. [Glasgow University, Glasgow, Lanarkshire (United Kingdom); Esperante, D.; Gallas, A. [Universidade de Santiago de Compostela, Santiago de Compostela (Spain); Gordon, H. [University of Oxford, Oxfordshire (United Kingdom); Heijden, B. van der [NIKHEF, Amsterdam (Netherlands); Hombach, C. [University of Manchester, Manchester, Lancashire (United Kingdom); Hynds, D. [Glasgow University, Glasgow, Lanarkshire (United Kingdom); John, M. [University of Oxford, Oxfordshire (United Kingdom); Leflat, A. [Lomonosov Moscow State University, Moscow (Russian Federation); Li, Y. [University of Oxford, Oxfordshire (United Kingdom); and others

    2013-09-21

    The Timepix particle tracking telescope has been developed as part of the LHCb VELO Upgrade project, supported by the Medipix Collaboration and the AIDA framework. It is a primary piece of infrastructure for the VELO Upgrade project and is being used for the development of new sensors and front end technologies for several upcoming LHC trackers and vertexing systems. The telescope is designed around the dual capability of the Timepix ASICs to provide information about either the deposited charge or the timing information from tracks traversing the 14×14 mm matrix of 55×55μm pixels. The rate of reconstructed tracks available is optimised by taking advantage of the shutter driver readout architecture of the Timepix chip, operated with existing readout systems. Results of tests conducted in the SPS North Area beam facility at CERN show that the telescope typically provides reconstructed track rates during the beam spills of between 3.5 and 7.5 kHz, depending on beam conditions. The tracks are time stamped with 1 ns resolution with an efficiency of above 98% and provide a pointing resolution at the centre of the telescope of ∼1.6μm. By dropping the time stamping requirement the rate can be increased to ∼15kHz, at the expense of a small increase in background. The telescope infrastructure provides CO{sub 2} cooling and a flexible mechanical interface to the device under test, and has been used for a wide range of measurements during the 2011–2012 data taking campaigns. -- Highlights: • We provide a technical description of the Timepix Telescope for particle tracking applications. • We demonstrate the spatial and timing resolution to be 2μm and 1 ns respectively. • The maximum particle rate is 7.5 kHz with highly resolved timing and spacing. • The maximum particle rate is 15 kHz with only highly resolved spacing. • We briefly describe the software and tracking algorithms used to achieve this.

  13. Plans for the Meter Class Autonomous Telescope and Potential Coordinated Measurements with Kwajalein Radars

    Science.gov (United States)

    Stansberry, Gene; Kervin, Paul; Mulrooney, Mark

    2010-01-01

    The National Aeronautics and Space Administration's (NASA) Orbital Debris Program Office is teaming with the US Air Force Research Laboratory's (AFRL) Maui Optical Site to deploy a moderate field-of-view, 1.3 m aperture, optical telescope for orbital debris applications. The telescope will be located on the island of Legan in the Kwajalein Atoll and is scheduled for completion in the Spring of 2011. The telescope is intended to sample both low inclination/high eccentricity orbits and near geosynchronous orbits. The telescope will have a 1 deg diagonal field-of-view on a 4K x 4K CCD. The telescope is expected to be able to detect 10-cm diameter debris at geosynchronous altitudes (5 sec exposure assuming a spherical specular phase function w/ albedo =0.13). Once operational, the telescope has the potential of conducting simultaneous observations with radars operated by the US Army at Kwajalein Atoll (USAKA) and located on the island of Roi-Namur, approximately 55 km to the north of Legan. Four radars, representing 6 frequency bands, are available for use: ALTAIR (ARPA-Long Range Tracking and Instrumentation Radar) operating at VHF & UHF, TRADEX (Target Resolution and Discrimination Experiment) operating at L-band and S-band, ALCOR (ARPA-Lincoln C-band Observables Radar) operating at S-band, and MMW (Millimeter Wave) Radar operating at Ka-band. Also potentially available is the X-band GBRP (Ground Based Radar-Prototype located 25 km to the southeast of Legan on the main island of Kwajalein.

  14. Technology development for cryogenic deployable telescope structures and mechanisms

    Science.gov (United States)

    Atkinson, Charles B.; Gilman, Larry; Reynolds, Paul

    2003-12-01

    At 6-7 meters in diameter, the James Webb Space Telescope (JWST) will require structures that remain stable to levels that are on the order of 10 nanometers under dynamic and thermal loading while operating at cryogenic temperatures. Moreover, the JWST will be the first telescope in space that is deployed, resulting in an aperture that is not only segmented, but has hinge-lines and the associated joining systems or latches in it. In order to understand the behavior and reduce the risk associated with very large, deployed structures and the stability of the associated structure and latches, we developed and tested the largest cryogenic structure ever built and then characterized its stability. This paper presents a description of the design of the Development Optical Telescope Assembly (DOTA), the testing performed, and the results of the testing performed on it. We discuss the material selection and characterization processes, give a description of the test configurations, describe the metrology equipment and the validation process for it, provide the test results, and summarize the conclusions drawn from the results. The testing and associated results include characterization of the thermal stability of the large-scale structure, characterization of the micro-dynamic stability of the latching system, and measurements of the deployment capability of the mechanisms. We also describe how the DOTA design relates to the JWST design and how the test results relate to the JWST requirements.

  15. The Hubble Space Telescope Education and Public Outreach Program

    Science.gov (United States)

    Teays, T. J.; Eisenhamer, B.; Eisenhamer, J.; Amazing Space Team

    2001-05-01

    The Hubble Space Telescope has conducted a long-standing and vigorous program in education and public outreach. This program uses a variety of methods to reach a broad spectrum of audiences. Education products are developed in a team environment that partners educators, curriculum experts, scientists, and production experts, such as graphic artists, Web designers, programmers, and education evaluators. A popular Web site is maintained, and has been substantially augmented in the past year. The Amazing Space program consists of a suite of online, interactive modules for use in the kindergarten through 12th grade classroom. The program is rooted in the national education standards and benefits from a robust evaluation process. The HST images and data are used to engage students in learning basic science and mathematics concepts. The activity/lessons include extensive, online assistance for educators, so that they can be readily used in the classroom. Hardcopy products such as posters, lithographs, teacher guides, and trading cards are generally tied to online products, to provide multiple entries to the material. We also provide training for teachers in the use of our products, as appropriate. Informal science education is supported by providing services to museums, planetariums, libraries and related institutions. The very popular ViewSpace, a computer-based video service is being used by many informal science facilities. In addition, HST has supported the creation of both permanent and traveling exhibits about HST. The Space Telescope Science Institute operates the Hubble Space Telescope for NASA.

  16. Automated Polarimetry with Smaller Aperture Telescopes: The ROVOR Observatory

    Directory of Open Access Journals (Sweden)

    Joseph Moody

    2017-10-01

    Full Text Available To better understand possible blazar jet mechanisms and morphologies, brighter prototypical objects are regularly monitored for variability in optical broad-band light. If the monitoring filters are polarized, the position angles and polarization percentages can be measured and their evolution monitored over time. However, building up a statistically significant time base of polarization parameters requires the arduous task of monitoring sources for months or years to catch and follow interesting events such as flares. Fortunately, monitoring an object is easily done using remotely operated or robotic telescopes. The Remote Observatory for Variable Object Research (ROVOR is a small-aperture telescope that has monitored blazars in broad-band Johnson filters since 2009. Calibration data using a set of four plane-polarized filters suggest that it is suitable for polarimetric monitoring as well. We have successfully collected data on CTA 102 and are encouraged at the prospects of monitoring it and other similar objects. Long-term monitoring campaigns are a scientifically and educationally-effective use of underutilized smaller-aperture telescopes.

  17. Object oriented design of the Liverpool Telescope Robotic Control System

    Science.gov (United States)

    Fraser, Stephen N.; Steele, Iain A.

    2002-12-01

    In the traditional, manned observatory, an astronomer must continually be weighing together many factors during the course of an observing run in order to make an appropriate decision on the course of action at that time. Weather conditions may force suspension of the observing program to protect the telescope, later to be resumed when conditions improve. Power outages may force controlled shutdown of computers and other hardware. Changes in sky condition may require on-the-fly changes to the scheduled program. For the Liverpool Telescope (LT), the Robotic Control System (RCS) is designed to act as a replacement for the duty astronomer. The system is required to be robust, reliable and adaptable e.g. to future instrument configurations and varying operational objectives. Consequently, object-oriented techniques which promote modularity and code re-use have been employed throughout the design of this system to facilitate maintainance and future upgrading. This paper describes the task management architecture (TMA) - a configurable, pattern based object model defining the cognitive functionality of the RCS, the environment monitoring architecture (EMA) - a configurable, rule-based decision making paradigm and the use of our proprietary Java message system (JMS) communications architecture to control the telescope and associated instrumentation.

  18. An atmosphere monitoring system for the Sardinia radio telescope

    Science.gov (United States)

    Buffa, F.; Bolli, P.; Sanna, G.; Serra, G.

    2017-01-01

    The Sardinia radio telescope (SRT) is a new facility managed by the Italian National Institute for Astrophysics (INAF). SRT will detect the extremely faint radio wave signals emitted by astronomical objects in a wide frequency range from decimeter to millimeter wavelengths. Especially at high frequencies (>10 GHz), specific weather conditions and interactions between signal and atmospheric constituents (mainly water and oxygen molecules) affect the radio astronomic observation reducing the antenna performances. Thus, modern ground-based telescopes are usually equipped with systems able to examine in real-time several atmospheric parameters (opacity, integrated water vapor, etc.), and in some cases to forecast the weather conditions (wind, rain, snow, etc.), in order to ensure the antenna safety and support the schedule of the telescope observations. Here, we describe the atmosphere monitoring system (AMS) realized with the aim to improve the SRT operative efficiency. It consists of a network of different sensors such as radiometers, radiosondes, weather stations, GPS and some well-established weather models. After a validation of the scheme, we successfully tested the AMS in two real practical scenarios, comparing the AMS outcomes with those of independent techniques. In the first one we were able to detect an incoming storm front applying different techniques (GPS, radiometer and the weather forecast model), while in the last one we modeled the SRT antenna system temperature at 22 GHz processing the AMS data set.

  19. The Genesis Project: Science Cases for a Large Submm Telescope

    Science.gov (United States)

    Schneider, Nicola

    2018-01-01

    The formation of stars is intimately linked to the structure and evolution of molecular clouds in the interstellar medium. In the context of the ANR/DFG project GENESIS (GENeration and Evolution of Structures in the Ism, http://www.astro.uni-koeln.de/node/965), we explore this link with a new approach by combining far-infrared maps and surveys of dust (Herschel) and cooling lines (CII, CI, CO, OI with SOFIA), with molecular line maps. Dedicated analysis tools are used to characterise molecular cloud structure, and we explore the coupling of turbulence with heating- and cooling processes. The project gathers a large observational data set, from molecular line maps at (sub)-mm wavelengths from ground-based telescopes (e.g. IRAM) up to high-frequency airborne spectroscopic and continuum observations (SOFIA). Nevertheless, we identified the need for a large single-dish submm telescope, operating in the southern hemisphere at high frequencies. Only such an instrument is able to observe important ISM cooling lines, like the CI lines at 490 and 810 GHz or high-J CO lines, shock tracers, or probes of turbulence dissipation with high angular resolution in Galactic and extragalactic sources. We will discuss possible science cases and demonstrate how those are addressed within GENESIS, and the science done with the new 6m Cologne-Cornell CCAT-prime submm telescope.

  20. Silicon carbide optics for space and ground based astronomical telescopes

    Science.gov (United States)

    Robichaud, Joseph; Sampath, Deepak; Wainer, Chris; Schwartz, Jay; Peton, Craig; Mix, Steve; Heller, Court

    2012-09-01

    Silicon Carbide (SiC) optical materials are being applied widely for both space based and ground based optical telescopes. The material provides a superior weight to stiffness ratio, which is an important metric for the design and fabrication of lightweight space telescopes. The material also has superior thermal properties with a low coefficient of thermal expansion, and a high thermal conductivity. The thermal properties advantages are important for both space based and ground based systems, which typically need to operate under stressing thermal conditions. The paper will review L-3 Integrated Optical Systems - SSG’s (L-3 SSG) work in developing SiC optics and SiC optical systems for astronomical observing systems. L-3 SSG has been fielding SiC optical components and systems for over 25 years. Space systems described will emphasize the recently launched Long Range Reconnaissance Imager (LORRI) developed for JHU-APL and NASA-GSFC. Review of ground based applications of SiC will include supporting L-3 IOS-Brashear’s current contract to provide the 0.65 meter diameter, aspheric SiC secondary mirror for the Advanced Technology Solar Telescope (ATST).

  1. Development of adaptive optics elements for solar telescope

    Science.gov (United States)

    Lukin, V. P.; Grigor'ev, V. M.; Antoshkin, L. V.; Botugina, N. N.; Kovadlo, P. G.; Konyaev, P. A.; Kopulov, E. A.; Skomorovsky, V. I.; Trifonov, V. D.; Chuprakov, S. A.

    2012-07-01

    The devices and components of adaptive optical system ANGARA, which is developed for image correction in the Big solar vacuum telescope (BSVT) at Baykal astrophysical observatory are described. It is shown that the use of modernized adaptive system on BSVT not only reduces the turbulent atmospheric distortions of image, but also gives a possibility to improve the telescope developing new methods of solar observations. A high precision Shack-Hartmann wavefront (WF) sensor has been developed on the basis of a low-aperture off-axis diffraction lens array. The device is capable of measuring WF slopes at array sub-apertures of size 640X640 μm with an error not exceeding 4.80 arc.sec. Also the modification of this sensor for adaptive system of solar telescope using extended scenes as tracking objects, such as sunspot, pores, solar granulation and limb, is presented. The software package developed for the proposed WF sensors includes three algorithms of local WF slopes estimation (modified centroids, normalized cross-correlation and fast Fourier-demodulation), as well as three methods of WF reconstruction (modal Zernike polynomials expansion, deformable mirror response functions expansion and phase unwrapping), that can be selected during operation with accordance to the application.

  2. INFN Camera demonstrator for the Cherenkov Telescope Array

    CERN Document Server

    Ambrosi, G; Aramo, C.; Bertucci, B.; Bissaldi, E.; Bitossi, M.; Brasolin, S.; Busetto, G.; Carosi, R.; Catalanotti, S.; Ciocci, M.A.; Consoletti, R.; Da Vela, P.; Dazzi, F.; De Angelis, A.; De Lotto, B.; de Palma, F.; Desiante, R.; Di Girolamo, T.; Di Giulio, C.; Doro, M.; D'Urso, D.; Ferraro, G.; Ferrarotto, F.; Gargano, F.; Giglietto, N.; Giordano, F.; Giraudo, G.; Iacovacci, M.; Ionica, M.; Iori, M.; Longo, F.; Mariotti, M.; Mastroianni, S.; Minuti, M.; Morselli, A.; Paoletti, R.; Pauletta, G.; Rando, R.; Fernandez, G. Rodriguez; Rugliancich, A.; Simone, D.; Stella, C.; Tonachini, A.; Vallania, P.; Valore, L.; Vagelli, V.; Verzi, V.; Vigorito, C.

    2015-01-01

    The Cherenkov Telescope Array is a world-wide project for a new generation of ground-based Cherenkov telescopes of the Imaging class with the aim of exploring the highest energy region of the electromagnetic spectrum. With two planned arrays, one for each hemisphere, it will guarantee a good sky coverage in the energy range from a few tens of GeV to hundreds of TeV, with improved angular resolution and a sensitivity in the TeV energy region better by one order of magnitude than the currently operating arrays. In order to cover this wide energy range, three different telescope types are envisaged, with different mirror sizes and focal plane features. In particular, for the highest energies a possible design is a dual-mirror Schwarzschild-Couder optical scheme, with a compact focal plane. A silicon photomultiplier (SiPM) based camera is being proposed as a solution to match the dimensions of the pixel (angular size of ~ 0.17 degrees). INFN is developing a camera demonstrator made by 9 Photo Sensor Modules (PSMs...

  3. The Timepix Telescope for High Performance Particle Tracking

    CERN Document Server

    Akiba, Kazuyoshi; van Beuzekom, Martin; van Beveren, Vincent; Borghi, Silvia; Boterenbrood, Henk; Buytaert, Jan; Collins, Paula; Dosil Suárez, Alvaro; Dumps, Raphael; Eklund, Lars; Esperante, Daniel; Gallas, Abraham; Gordon, Hamish; van der Heijden, Bas; Hombach, Christoph; Hynds, Daniel; John, Malcolm; Leflat, Alexander; Li, Yi Ming; Longstaff, Ian; Morton, Alexander; Nakatsuka, Noritsugu; Nomerotski, Andre; Parkes, Chris; Perez Trigo, Eliseo; Plackett, Richard; Reid, Matthew M; Rodriguez Perez, Pablo; Schindler, Heinrich; Szumlak, Tomasz; Tsopelas, Panagiotis; Vázquez Sierra, Carlos; Velthuis, Jaap; Wysokinski, Michal

    2013-01-01

    The Timepix particle tracking telescope has been developed as part of the LHCb VELO Upgrade project, supported by the Medipix Collaboration and the AIDA framework. It is a primary piece of infrastructure for the VELO Upgrade project and is being used for the development of new sensors and front end technologies for several upcoming LHC trackers and vertexing systems. The telescope is designed around the dual capability of the Timepix ASICs to provide information about either the deposited charge or the timing information from tracks traversing the 14 x 14mm matrix of 55 x 55 um pixels. The rate of reconstructed tracks available is optimised by taking advantage of the shutter driven readout architecture of the Timepix chip, operated with existing readout systems. Results of tests conducted in the SPS North Area beam facility at CERN show that the telescope typically provides reconstructed track rates during the beam spills of between 3.5 and 7.5 kHz, depending on beam conditions. The tracks are time stamped wi...

  4. Cosmology with liquid mirror telescopes

    Science.gov (United States)

    Hogg, David W.; Gibson, Brad K.; Hickson, Paul

    1993-01-01

    Liquid mirrors provide an exciting means to obtain large optical telescopes for substantially lower costs than conventional technologies. The liquid mirror concept has been demonstrated in the lab with the construction of a diffraction limited 1.5 m mirror. The mirror surface, using liquid mercury, forms a perfect parabolic shape when the mirror cell is rotated at a uniform velocity. A liquid mirror must be able to support a heavy mercury load with minimal flexure and have a fundamental resonant frequency that is as high as possible, to suppress the amplitude of surface waves caused by small vibrations transmitted to the mirror. To minimize the transmission of vibrations to the liquid surface, the entire mirror rests on an air bearing. This necessitates the mirror cell being lightweight, due to the limited load capabilities of the air bearing. The mirror components must also have physical characteristics which minimize the effects of thermal expansion with ambient temperature fluctuations in the observatory. In addition, the 2.7 m mirror construction is designed so that the techniques used may be readily extended to the construction of large mirrors. To attain the goals of a lightweight, rigid mirror, a composite laminant construction was used. The mirror consists of a foam core cut to the desired parabolic shape, with an accuracy of a few mm. An aluminum hub serves as an anchor for the foam and skin, and allows precise centering of the mirror on the air bearing and drive system. Several plys of Kevlar, covered in an epoxy matrix, are then applied to the foam. A final layer of pure epoxy is formed by spin casting. This final layer is parabolic to within a fraction of a mm. An aluminum ring bonded to the circumference of the mirror retains the mercury, and incorporates stainless-steel hard-points for the attachment of balance weights.

  5. The ATHENA telescope and optics status

    DEFF Research Database (Denmark)

    Bavdaz, Marcos; Wille, Eric; Ayre, Mark

    2017-01-01

    The work on the definition and technological preparation of the ATHENA (Advanced Telescope for High ENergy Astrophysics) mission continues to progress. In parallel to the study of the accommodation of the telescope, many aspects of the X-ray optics are being evolved further. The optics technology...... chosen for ATHENA is the Silicon Pore Optics (SPO), which hinges on technology spin-in from the semiconductor industry, and uses a modular approach to produce large effective area lightweight telescope optics with a good angular resolution. Both system studies and the technology developments are guided...... by ESA and implemented in industry, with participation of institutional partners. In this paper an overview of the current status of the telescope optics accommodation and technology development activities is provided....

  6. The ATHENA telescope and optics status

    Science.gov (United States)

    Bavdaz, Marcos; Wille, Eric; Ayre, Mark; Ferreira, Ivo; Shortt, Brian; Fransen, Sebastiaan; Collon, Maximilien; Vacanti, Giuseppe; Barriere, Nicolas; Landgraf, Boris; Haneveld, Jeroen; van Baren, Coen; Zuknik, Karl-Heintz; Della Monica Ferreira, Desiree; Massahi, Sonny; Christensen, Finn; Krumrey, Michael; Burwitz, Vadim; Pareschi, Giovanni; Spiga, Daniele; Valsecchi, Giuseppe; Vernani, Dervis; Oliver, Paul; Seidel, André

    2017-08-01

    The work on the definition and technological preparation of the ATHENA (Advanced Telescope for High ENergy Astrophysics) mission continues to progress. In parallel to the study of the accommodation of the telescope, many aspects of the X-ray optics are being evolved further. The optics technology chosen for ATHENA is the Silicon Pore Optics (SPO), which hinges on technology spin-in from the semiconductor industry, and uses a modular approach to produce large effective area lightweight telescope optics with a good angular resolution. Both system studies and the technology developments are guided by ESA and implemented in industry, with participation of institutional partners. In this paper an overview of the current status of the telescope optics accommodation and technology development activities is provided.

  7. Beam Combination for Sparse Aperture Telescopes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Stellar Imager, an ultraviolet, sparse-aperture telescope, was one of the fifteen Vision Missions chosen for a study completed last year. Stellar Imager will...

  8. EDUCATIONAL ASTRONOMICAL OBSERVATIONS ON REMOTE ACCESS TELESCOPES

    Directory of Open Access Journals (Sweden)

    Ivan P. Kriachko

    2016-01-01

    Full Text Available The purpose of this article is to show the way of overcoming one of the major problems of astronomy teaching methods in upper secondary school – organization of educational astronomical observations. Nowadays it became possible to perform such observations on remote access telescopes. By using up-to-date informational and communicational technologies, having an opportunity to work with robotic telescopes allows us to organize a unique cognitive and research oriented activities for students while conducting their specialized astronomical studies. Below here is given a brief description of the most significant robotic telescopes and the way of the usage of open remote access telescopic network which was created by professors and scientists of Harvard-Smithsonian Center for Astrophysics, USA.

  9. Lightweight composite mirrors for telescopes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Lightweight, steady and stiff mirrors are necessary to decrease cost of telescopes such as IXO and GenX used in special NASA missions. Low-density materials are...

  10. Beam Combination for Sparse Aperture Telescopes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposal is for funding to continue development of an alternative beam combiner for Stellar Imager (SI), a 30-aperture, interferometric telescope chosen as one...

  11. The Lunar Ultraviolet Telescope Experiment (LUTE): Enabling technology for an early lunar surface payload

    Science.gov (United States)

    Nein, M. E.; Hilchey, J. D.

    1995-01-01

    The Lunar Ultraviolet Telescope Experiment (LUTE) is a 1-m aperture, fixed declination, optical telescope to be operated on the surface of the Moon. This autonomous science payload will provide an unprecedented ultraviolet stellar survey even before manned lunar missions are resumed. This paper very briefly summarizes the LUTE concept analyzed by the LUTE Task Team of NASA's Marshall Space Flight Center (MSFC). Scientific capabilities and the Reference Design Concept are identified, and the expected system characteristics are summarized. Technologies which will be required to enable the early development, deployment, and operation of the LUTE are identified, and the principle goals and approaches for their advancement are described.

  12. Pointing and tracking software for the Gemini 8-m Telescopes

    Science.gov (United States)

    Wallace, Patrick T.

    1997-03-01

    The Gemini telescope control system (TCS) uses an integrated pointing/tracking scheme, based on the 'virtual telescope' (VT) concept, but extended to encompass autoguiding and control of the chopping secondary (M2). The TCS treats each autoguider probe as a separate VT, with a different target from the main telescope (namely a guidestar instead of a science source), different color, flexure and so on. The constraint that both the guider VT and the main-telescope VT share one mount (Az,El) enables the (x,y) of the guidestar image to be predicted. Comparisons between the predicted and measured (x,y) positions enable the guiding system to generate rapid adjustments to M2 tip/tilt, taking out windshake as well as other tracking errors. The TCS monitors M2 tip/tilt and adjusts the mount pointing as required, preventing unwanted buildup of M2 offset. Independent control of M2, to accomplish rapid scans while smoothly tracking the (Az,El) mount for example, is provided by having separate 'mount' and 'source' VTs. In this case, the constraint that there is only one mount (Az, El) enables the M2 tip/tilt to be determined which will place the target image in the required place. Chopping is done by implementing the different chop states as different VTs all running in parallel. The TCS is oblivious to the use being made of the different M2 tip/tilts that the different chop states call for, that being left to the various subsystems. The Gemini plan calls for five VTs (two permanent guide detectors and one on-instrument, plus the mount and target VTs), and all but the mount VT support three chop states. Operating at rate of 20 Hz, this means that the entire pointing calculation has to be performed 260 times per second, and some care has been taken to organize the computations efficiently.

  13. Giat Industries selected for construction of the "Very Large Telescope"

    Science.gov (United States)

    1995-06-01

    Versailles-Satory (France) May 31, 1995 - Giat Industries has just obtained a contract from the European Southern Observatory (ESO) for the construction of the primary and tertiary mirror supports and the positioning apparatus of the world's largest optical telescope. This contract, worth almost 140 million francs, represents over 100,000 hours of work. It was won by Gitech, a division of Giat Industries, in collaboration with the Sfim group, following an international competition between the largest European groups in the space field. Gitech is charged with the development of civil and military industrial equipment for the Giat Industries group, in particular in high technology fields. The VLT (Very Large Telescope) will be installed in Chile before the year 2000; the delivery schedule provides for reception of the first assembly in May 1997. It will consist of four telescopes of 8.2m diameter, providing, in its most powerful configuration, a close-up view of an object measuring one meter on the surface of the moon. The cell, built by Gitech, is one of the key parts of the telescope. It mainly consists of a very rigid metal structure and an electro-hydraulic system of more that 200 hydraulic jacks and 150 electrically-controlled jacks linking the metallic structure to the mirror. This structure, produced to an original design of laser-welded steel chambers, weighs less than 10 tonnes and will support over 37 tonnes of mirror and equipment, while guaranteeing precise positioning to within a micron. The electro-hydraulic jack system, manufactured in collaboration with the Sfim group, will support and position the mirror, and correct its geometry by applying a precise distribution of forces to its rear. The assembly is designed to meet the requirements of para-seismic safety. Gitech is also producing the computerised control system to ensure the operation and the reliability of the assembly.

  14. Solar Rejection Filter for Large Telescopes

    Science.gov (United States)

    Hemmati, Hamid; Lesh, James

    2009-01-01

    To reject solar radiation photons at the front aperture for large telescopes, a mosaic of large transmission mode filters is placed in front of the telescope or at the aperture of the dome. Filtering options for effective rejection of sunlight include a smaller filter down-path near the focus of the telescope, and a large-diameter filter located in the front of the main aperture. Two types of large filters are viable: reflectance mode and transmittance mode. In the case of reflectance mode, a dielectric coating on a suitable substrate (e.g. a low-thermal-expansion glass) is arranged to reflect only a single, narrow wavelength and to efficiently transmit all other wavelengths. These coatings are commonly referred to as notch filter. In this case, the large mirror located in front of the telescope aperture reflects the received (signal and background) light into the telescope. In the case of transmittance mode, a dielectric coating on a suitable substrate (glass, sapphire, clear plastic, membrane, and the like) is arranged to transmit only a single wavelength and to reject all other wavelengths (visible and near IR) of light. The substrate of the large filter will determine its mass. At first glance, a large optical filter with a diameter of up to 10 m, located in front of the main aperture, would require a significant thickness to avoid sagging. However, a segmented filter supported by a structurally rugged grid can support smaller filters. The obscuration introduced by the grid is minimal because the total area can be made insignificant. This configuration can be detrimental to a diffraction- limited telescope due to diffraction effects at the edges of each sub-panel. However, no discernable degradation would result for a 20 diffraction-limit telescope (a photon bucket). Even the small amount of sagging in each subpanel should have minimal effect in the performance of a non-diffraction limited telescope because the part has no appreciable optical power. If the

  15. Metrology System for a Large, Somewhat Flexible Telescope

    Science.gov (United States)

    Liebe, Carl Christian; Bartman, Randall; Cook, Walter; Craig, William

    2009-01-01

    A proposed metrology system would be incorporated into a proposed telescope that would include focusing optics on a rigid bench connected via a deployable mast to another rigid bench holding a focal-plane array of photon counting photodetectors. Deformations of the deployable mast would give rise to optical misalignments that would alter the directions (and, hence, locations) of incidence of photons on the focal plane. The metrology system would measure the relative displacement of the focusing- optics bench and the focal-plane array bench. The measurement data would be used in post-processing of the digitized photodetector outputs to compensate for the mast-deformation-induced changes in the locations of incidence of photons on the focal plane, thereby making it possible to determine the original directions of incidence of photons with greater accuracy. The proposed metrology system is designed specifically for the Nuclear Spectroscopic Telescope Array (NuSTAR) a proposed spaceborne x-ray telescope. The basic principles of design and operation are also applicable to other large, somewhat flexible telescopes, both terrestrial and spaceborne. In the NuSTAR, the structural member connecting the optical bench and the photodetector array would be a 10-m-long deployable mast, and there is a requirement to keep errors in measured directions of incidence of photons below 10 arc seconds (3 sigma). The proposed system would include three diode lasers that would be mounted on the focusing-optics bench. For clarity, only one laser is shown in the figure, which is a greatly simplified schematic diagram of the system. Each laser would be aimed at a position-sensitive photodiode that would be mounted on the detector bench alongside the aforementioned telescope photodetector array. The diode lasers would operate at a wavelength of 830 nm, each at a power of 200 mW. Each laser beam would be focused to a spot of .1-mm diameter on the corresponding position-sensitive photodiode. To

  16. Active optics for next generation space telescopes

    Science.gov (United States)

    Costes, V.; Perret, L.; Laubier, D.; Delvit, J. M.; Imbert, C.; Cadiergues, L.; Faure, C.

    2017-09-01

    High resolution observation systems need bigger and bigger telescopes. The design of such telescopes is a key issue for the whole satellite. In order to improve the imaging resolution with minimum impact on the satellite, a big effort must be made to improve the telescope compactness. Compactness is also important for the agility of the satellite and for the size and cost of the launcher. This paper shows how compact a high resolution telescope can be. A diffraction limited telescope can be less than ten times shorter than its focal length. But the compactness impacts drastically the opto-mechanical sensitivity and the optical performances. Typically, a gain of a factor of 2 leads to a mechanical tolerance budget 6 times more difficult. The need to implement active optics for positioning requirements raises very quickly. Moreover, the capability to compensate shape defaults of the primary mirror is the way to simplify the mirror manufacture, to mitigate the development risks and to minimize the cost. The larger the primary mirror is, the more interesting it is to implement active optics for shape compensations. CNES is preparing next generation of earth observation satellite in the frame of OTOS (Observation de la Terre Optique Super-Résolue; High resolution earth observing optical system). OTOS is a technology program. In particular, optical technological developments and breadboards dedicated to active optics are on-going. The aim is to achieve TRL 5 to TRL6 for these new technologies and to validate the global performances of such an active telescope.

  17. Numerical Simulations of Airflow in Telescope Enclosures

    Science.gov (United States)

    De Young, David S.

    1996-12-01

    Contemporary design of large telescopes requires optimization of the telescope environment in order to fully realize the capabilities of advanced mirror technology, telescope control, and instrumentation. Telescope enclosure design is a critical element in providing this optimized environment. Enclosures must protect the telescope while minimizing the local degradation of image quality, and the large cost of such structures requires that a successful design be in place before construction begins. In order to test various enclosure designs, three-dimensional nonlinear hydrodynamic calculations have been carried out to determine the flow of air within and around proposed enclosure configurations. Such calculations can test the effectiveness of dome venting, evaluate the dynamic pressures that cause possible deformation of primary mirror surfaces and structural windshake, and isolate sources of turbulent flow that may cause image degradation. Results are presented from a series of calculations that investigated characteristic flows in the Gemini 8-meter enclosure and around its associated primary mirror cell. In general the enclosure design is found to meet its overall design goals. Good dome venting is achieved under a variety of conditions, yet the telescope structure is kept in a low wind environment.

  18. Application of Information Technologies on Astronomy: Japanese Virtual Observatory (JVO Portal

    Directory of Open Access Journals (Sweden)

    Y Shirasaki

    2010-02-01

    Full Text Available The Japanese Virtual Observatory (JVO is a web portal to various kinds of astronomical resources distributed all over the world. We have started its official operation of the JVO portal since March 2008. The JVO provides seamless access to the Virtual Observatory (VO compliant data services, and also access to the reduced data observed with Subaru telescope and on-line data reduction system for Suprime-Cam instrument of the Subaru telescope. The system implements standards of the International Virtual Observatory Alliance (IVOA to communicate with the VO components in the world.

  19. The NASA Meter Class Autonomous Telescope: Ascension Island

    Science.gov (United States)

    Lederer, S. M.; Stansbery, E. G.; Cowardin, H. M.; Hickson, P.; Pace, L. F.; Abercromby, K. J.; Kervin, P. W.

    2013-01-01

    The Meter Class Autonomous Telescope (MCAT) is the newest optical sensor dedicated to NASA's mission to characterize the space debris environment. It is the successor to a series of optical telescopes developed and operated by the JSC Orbital Debris Program Office (ODPO) to monitor and assess the debris environment in (1) Low Earth Orbit (LEO), (2) Medium Earth Orbit (MEO), and (3) Geosynchronous Orbit (GEO), with emphasis on LEO and GEO altitudes. A joint NASA - Air Force Research Labs project, MCAT is a 1.3m optical telescope dedicated to debris research. Its optical path and sensor yield a large survey fence at the cutting edge of current detector performance. It has four primary operational observing modes, two of which were not computationally feasible a decade ago. Operations are supported by a sophisticated software suite that monitors clouds and weather conditions, and controls everything from data collection to dome rotation to processing tens of gigabytes of image data nightly. With fainter detection limits, precision detection, acquisition and tracking of targets, multi-color photometry, precision astrometry, automated re-acquisition capability, and the ability to process all data at the acquisition rate, MCAT is capable of producing and processing a volume and quality of data far in excess of any current (or prior) ODPO operations. This means higher fidelity population inputs and eliminating the multi-year backlog from acquisition-to-product typical of optical campaigns. All of this is possible given a suitable observing location. Ascension Island offers numerous advantages. As a British overseas territory with a US Air Force base presence, the necessary infrastructure and support already exists. It is located mid-way between Brazil and Africa at 7.93S latitude and 14.37 W longitude. With the Ground-based Electro-Optical Deep Space Surveillance (GEODSS) asset in Moron, Spain shutting down, this presents access to the sky from a unique latitude

  20. Unimorph deformable mirror for space telescopes: environmental testing.

    Science.gov (United States)

    Rausch, Peter; Verpoort, Sven; Wittrock, Ulrich

    2016-01-25

    We have developed and manufactured a unimorph deformable mirror for space telescopes based on piezoelectric actuation. The mirror features 44 actuators, has an aperture of 50 mm, and is designed to reproduce low-order Zernike modes with a stroke of several tens of μm. We assessed the space compliance by operating the mirror in thermal vacuum, and exposing it to random and sinusoidal vibrations, as well as to ionizing irradiation. Additionally, the operational life time and the laser power handling capability were tested. The mirror was successfully operated in thermal vacuum at 100 K. We report on the conducted tests and the methods used to evaluate the mirror's performance, and discuss the compliance with the demanded requirements.

  1. European astronaut selected for the third Hubble Space Telescope

    Science.gov (United States)

    1998-08-01

    The STS-104 crew will rendezvous with the orbiting Hubble Space Telescope, which is the size of a city bus, capture it using the Shuttle's Canadian robot arm and secure it in Columbia's payload bay. Then, working in teams of two, the four astronauts will leave the Shuttle's pressurised cabin and venture into the payload bay, performing a variety of tasks that will improve the productivity and reliability of the telescope. The four astronauts will perform a series of six "extravehicular" activities in the open space environment. Such activities are commonly called spacewalks, but this term does little justice to the considerable physical and mental efforts that astronauts need to make in doing the very demanding work involved. The Shuttle commander and pilot for this flight have not yet been appointed, but the four designated mission specialists begin training for the STS-104 mission immediately. "The ambitious nature of this mission, with its six spacewalks, made it important for the payload crew to begin training as early as possible," said David C. Leestma, NASA Director of Flight Crew Operations at the Johnson Space Center in Houston, to which Claude Nicollier is on resident assignment from ESA's European Astronaut Centre in Cologne, Germany, the home base of the European astronaut corps. The Hubble Space Telescope was launched into orbit in April 1990. It is one of the most capable optical telescopes available to astronomers today, producing images and spectral observations at the forefront of astronomy. The European Space Agency contributed a 15 share to the development of Hubble. One of the five scientific instruments on board, the Faint Object Camera, was built by a European industrial consortium made up of British Aerospace, Dornier and Matra under a contract with the European Space Agency. The solar arrays which provide Hubble with electrical power were manufactured by British Aerospace and Dornier. In its eight years of operation, the telescope has not

  2. Development of the Software for 30 inch Telescope Control System at KHAO

    Science.gov (United States)

    Mun, B.-S.; Kim, S.-J.; Jang, M.; Min, S.-W.; Seol, K.-H.; Moon, K.-S.

    2006-12-01

    Even though 30inch optical telescope at Kyung Hee Astronomy Observatory has been used to produce a series of scientific achievements since its first light in 1992, numerous difficulties in the operation of the telescope have hindered the precise observations needed for further researches. Since the currently used PC-TCS (Personal Computer based Telescope Control system) software based on ISA-bus type is outdated, it doesn't have a user friendly interface and make it impossible to scale. Also accumulated errors which are generated by discordance from input and output signals into a motion controller required new control system. Thus we have improved the telescope control system by updating software and modifying mechanical parts. We applied a new BLDC (brushless DC) servo motor system to the mechanical parts of the telescope and developed a control software using Visual Basic 6.0. As a result, we could achieve a high accuracy in controlling of the telescope and use the userfriendly GUI (Graphic User Interface).

  3. Decision Announced in Green Bank Telescope Arbitration Case

    Science.gov (United States)

    2001-02-01

    A decision has been reached by the arbitrator in the dispute between COMSAT Corporation, now part of Lockheed-Martin Global Telecommunications, and Associated Universities, Inc. (AUI) regarding additional costs on the contract to design and construct the Robert C. Byrd Green Bank Telescope (GBT). The GBT, in West Virginia, is the world's largest fully steerable radio telescope, the newest facility in the National Radio Astronomy Observatory's (NRAO) suite of astronomical instruments. The decision, released by the American Arbitration Association (AAA), calls for AUI, which operates the NRAO, to pay COMSAT 4.07 million over the fixed-price contract amount. The contract had standard provisions for disputes, which specify binding arbitration through the AAA for matters that could not be resolved in negotiation. The Robert C. Byrd Green Bank Telescope The contract to design and construct the GBT had an agreed fixed price of 55 million, with work to begin on December 19, 1990 and to be completed by the end of 1994. The contract terms required the telescope to be designed and built to performance specifications, placing most of the performance risks associated with the project on the contractor. The telescope was accepted from the contractor on October 13, 2000, nearly six years later than the original contract delivery date. During the entire period of contract work the only agreed change in scope was a single change order for 150,000 executed in August of 1993. In 1998, COMSAT sought an additional payment of approximately 29 million above the contracted amount, alleging that AUI/NRAO had forced it to conduct unnecessary work on the telescope design and to build the telescope to an unreasonable life cycle (fatigue) specification. COMSAT also claimed that AUI/NRAO was obligated to pay the costs of accommodating what it claimed to be additional wind loads. COMSAT blamed these circumstances for its delay in completing the project on time and within the contract price. AUI

  4. The High-Resolution Lightweight Telescope for the EUV (HiLiTE)

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Galarce, D S; Boerner, P; Soufli, R; De Pontieu, B; Katz, N; Title, A; Gullikson, E M; Robinson, J C; Baker, S L

    2008-06-02

    The High-resolution Lightweight Telescope for the EUV (HiLiTE) is a Cassegrain telescope that will be made entirely of Silicon Carbide (SiC), optical substrates and metering structure alike. Using multilayer coatings, this instrument will be tuned to operate at the 465 {angstrom} Ne VII emission line, formed in solar transition region plasma at {approx}500,000 K. HiLiTE will have an aperture of 30 cm, angular resolution of {approx}0.2 arc seconds and operate at a cadence of {approx}5 seconds or less, having a mass that is about 1/4 that of one of the 20 cm aperture telescopes on the Atmospheric Imaging Assembly (AIA) instrument aboard NASA's Solar Dynamics Observatory (SDO). This new instrument technology thus serves as a path finder to a post-AIA, Explorer-class missions.

  5. Prime focus architectures for large space telescopes: reduce surfaces to save cost

    Science.gov (United States)

    Breckinridge, J. B.; Lillie, C. F.

    2016-07-01

    Conceptual architectures are now being developed to identify future directions for post JWST large space telescope systems to operate in the UV Optical and near IR regions of the spectrum. Here we show that the cost of optical surfaces within large aperture telescope/instrument systems can exceed $100M/reflection when expressed in terms of the aperture increase needed to over come internal absorption loss. We recommend a program in innovative optical design to minimize the number of surfaces by considering multiple functions for mirrors. An example is given using the Rowland circle imaging spectrometer systems for UV space science. With few exceptions, current space telescope architectures are based on systems optimized for ground-based astronomy. Both HST and JWST are classical "Cassegrain" telescopes derived from the ground-based tradition to co-locate the massive primary mirror and the instruments at the same end of the metrology structure. This requirement derives from the dual need to minimize observatory dome size and cost in the presence of the Earth's 1-g gravitational field. Space telescopes, however function in the zero gravity of space and the 1- g constraint is relieved to the advantage of astronomers. Here we suggest that a prime focus large aperture telescope system in space may have potentially have higher transmittance, better pointing, improved thermal and structural control, less internal polarization and broader wavelength coverage than Cassegrain telescopes. An example is given showing how UV astronomy telescopes use single optical elements for multiple functions and therefore have a minimum number of reflections.

  6. ALPACA: An Inexpensive but Uniquely Powerful Imaging Survey Telescope

    Science.gov (United States)

    Crotts, Arlin P.; ALPACA Consortium

    2006-12-01

    ALPACA (Advanced Liquid-mirror Probe of Astrophysics, Cosmology and Asteroids) is an 8-meter optical telescope destined for Cerro Tololo and designed to scan a strip of sky passing overhead and extending over 1000 square degrees. The imaging survey will be conducted in five photometric bands covering the optical waveband and allow for photometric descrimination of many source types, including supernova types and asteroid categories, and allow photometric redshift determination for both galaxies and supernovae. The ALPACA is intended to extend over at least a three years and reach a cumulative point-source detection of about 28th magnitude AB at 10-sigma. ALPACA will deliver nightly photometry for many classes of variable and moving objects. Most crucial, perhaps, will be the exquisitely deep, numerous and well-sampled multiband lightcurve sample for supernova, particularly SNe Ia to redshifts z 0.8. This is an excellent redshift range for dark energy model descrimination, but also can be used for unprecedentedly sensitive tests and improvements of the SN Ia standard candle relation. There are many other superlative projects that will be conducted with ALPACA data, including studies of high redshift galaxies, quasars and AGN, large scale structure, novae, variable stars, Galactic Bulge microlensing, Galactic structure, stellar populations, extrasolar planets, Kuiper Belt objects, Near-Earth objects and many other classes of targets. ALPACA is based on the 6-meter LZT (Large Zenith Telescope), which is currently operating in British Columbia and producing largely seeing-limited imaging. ALPACA has undergone conceptual design review and is now under design. Seeing tests are underway at sites on Cerro Tololo. We hope to achieve first light on ALPACA by late 2009. Proto-ALPACA is a stage of the project with the full-sized telescope with a smaller field of view, and will be first operational. ALPACA might eventually add instrumentation; a multiobject spectrograph is

  7. The Breadboard Model of the LISA Telescope Assembly

    Science.gov (United States)

    Lucarelli, Stefano; Scheulen, Dietmar; Kemper, Daniel; Sippel, Rudolf; Ende, David

    2012-07-01

    The primary goal of the LISA mission is the detection of gravitational waves from astronomical sources in a frequency range of 10-4 to 1 Hz. This requires operational stabilities in the picometer range as well as highly predictable mechanical distortions upon cooling down, outgassing in space, and gravity release. In March 2011 ESA announced a new way forward for the L-class candidate missions, including LISA. ESA and the scientific community are now studying options for European-only missions that offer a significant reduction of the costs, while maintaining their core science objectives. In the context of this reformulation exercise LISA has become the New Gravitational wave Observatory (NGO) [1]. Despite this reformulation, the need for dimensional stability in the picometer range remains valid, and ESA have continued the corresponding LISA Technology Development Activities (TDA’s) also in view of NGO. In such frame Astrium GmbH and xperion (Immenstaad/Friedrichshafen, Germany) have designed and manufactured an ultra-stable CFRP breadboard of the LISA telescope in order to experimentally demonstrate that the structure and the M1 & M2 mirror mounts are fulfilling the LISA requirements in the mission operational thermal environment. Suitable techniques to mount the telescope mirrors and to support the M1 & M2 mirrors have been developed, with the aim of measuring a system CTE of less than 10-7 K-1 during cooling down to -80 °C. Additionally to the stringent mass and stiffness specifications, the required offset design makes the control of relative tilts and lateral displacements between the M1 and M2 mirrors particularly demanding. The thermo-elastic performance of the telescope assembly is going to be experimentally verified by TNO (Delft, The Netherlands) starting from the second half of 2012. This paper addresses challenges faced in the design phase, and shows the resulting hardware.

  8. The Breadboard model of the LISA telescope assembly

    Science.gov (United States)

    Lucarelli, S.; Scheulen, D.; Kemper, D.; Sippel, R.; Verlaan, A.; Hogenhuis, H.; Ende, D.

    2017-11-01

    The primary goal of the LISA mission is the detection of gravitational waves from astronomical sources in a frequency range of 10-4 to 1 Hz. This requires operational stabilities in the picometer range as well as highly predictable mechanical distortions upon cooling down, outgassing in space, and gravity release. In March 2011 ESA announced a new way forward for the Lclass candidate missions, including LISA. ESA and the scientific community are now studying options for European-only missions that offer a significant reduction of the costs, while maintaining their core science objectives. In this context LISA has become the New Gravitational wave Observatory (NGO). Despite this reformulation, the need for dimensional stability in the picometer range remains valid, and ESA have continued the corresponding LISA Technology Development Activities (TDA's) also in view of NGO. In such frame Astrium GmbH and xperion (Friedrichshafen, Germany) have designed and manufactured an ultra-stable CFRP breadboard of the LISA telescope in order to experimentally demonstrate that the structure and the M1 & M2 mirror mounts are fulfilling the LISA requirements in the mission operational thermal environment. Suitable techniques to mount the telescope mirrors and to support the M1 & M2 mirrors have been developed, with the aim of measuring a system CTE of less than 10-7 K-1 during cooling down to -80°C. Additionally to the stringent mass and stiffness specifications, the required offset design makes the control of relative tilts and lateral displacements between the M1 and M2 mirrors particularly demanding. The thermo-elastic performance of the telescope assembly is going to be experimentally verified by TNO (Delft, The Netherlands) starting from the second half of 2012. This paper addresses challenges faced in the design phase, shows the resulting hardware and present first outcomes of the test campaign performed at TNO.

  9. Look to the Stars - The APUS Observatory: An Innovative Robotic Telescope for Online Astronomical Education and Research

    Science.gov (United States)

    Albin, Edward

    2018-01-01

    We report on the American Public University System’s new robotic telescope, located in Charles Town, WV -- an innovative observatory deployed in an online institution of higher education. The instrument is operated by the Department of Space Studies and is situated atop the university’s new Information Technology building. At the heart of the observatory is a Planewave CDK24 telescope, equipped with a SBIG STX-16803 CCD camera. The telescope is a key technological component in the Department's new undergraduate / graduate astronomy concentration. Since the university is a dedicated online educational institution, the acquisition of a fully remote controlled telescope ties closely into the program's philosophy of quality online instruction. Our robotic observatory is intimately integrated into our astronomy curriculum, with the telescope being utilized for original astronomical education and research purposes. For instance, not only is imagery used in the classroom and for laboratory instruction, graduate students in our MS degree program have an opportunity to collect original telescopic data for research / thesis projects. Examples of ongoing investigations with the telescope include observations of exoplanet transits and variable star photometry. When not in use for specific observing projects, the telescope is scripted to conduct autonomous supernova searches by patrolling dozens of galaxies throughout the night. Our goal is to have the instrument scheduled for continuous observing of the heavens throughout the year on all clear evenings.

  10. SST-GATE telescope: an innovative dual-mirror prototype for the Cherenkov Telescope Array

    Science.gov (United States)

    Dumas, Delphine; Huet, Jean-Michel; Dournaux, Jean-Laurent; Laporte, Philippe; Amans, Jean-Philippe; Fasola, Gilles; Zech, Andreas; Rulten, Cameron; Sol, Hélène; Blake, Simon; Schmoll, Jurgen

    2014-07-01

    The Observatoire de Paris is involved in the Cherenkov Telescope Array (CTA) project by designing and constructing on the site of Meudon a Small Size Telescope prototype, named SST-GATE, in collaboration with the CHEC team (Compact High Energy Camera) which is providing the camera. The telescope structure is based on the Schwarzschild- Couder optical design which has never been adopted before in the design of a ground-based telescope. This concept allows a larger field of view and cheaper and smaller telescope and camera design with improved performance compared to the Davies-Cotton design traditionally used in very high energy gamma-ray telescopes. The SST-GATE telescope has been designed with the prime objectives of being light, versatile and simple to assemble with a minimal maintenance cost. This papers aims at reviewing the SST-GATE telescope structure from mechanics to optics along with the control command architecture; several innovative developments implemented within the design are discussed. Updates of the project status and perspectives are made.

  11. On-site mirror facet condensation measurements for the Cherenkov Telescope Array

    Energy Technology Data Exchange (ETDEWEB)

    Dipold, J., E-mail: jessica.dipold@gmail.com [Instituto de Física de São Carlos, Universidade de São Paulo, São Carlos, SP (Brazil); Medina, M.C. [Instituto Argentino de Radioastronomía, CCT La Plata-CONICET (Argentina); García, B. [Instituto en Tecnologías de Detección y Astropartículas, CNEA, CONICET, UNSAM (Argentina); Universidad Tecnológica Nacional, FR-Mendoza (Argentina); Rasztocky, E. [Instituto Argentino de Radioastronomía, CCT La Plata-CONICET (Argentina); Mancilla, A.; Maya, J. [Instituto en Tecnologías de Detección y Astropartículas, CNEA, CONICET, UNSAM (Argentina); Larrarte, J.J. [Instituto Argentino de Radioastronomía, CCT La Plata-CONICET (Argentina); Souza, V. de [Instituto de Física de São Carlos, Universidade de São Paulo, São Carlos, SP (Brazil)

    2016-09-11

    The Imaging Atmospheric Cherenkov Technique (IACT) has provided very important discoveries in Very High Energy (VHE) γ-ray astronomy for the last two decades, being exploited mainly by experiments such as H.E.S.S., MAGIC and VERITAS. The same technique will be used by the next generation of γ-ray telescopes, Cherenkov Telescope Array – CTA, which is conceived to be an Observatory composed by two arrays strategically placed in both hemispheres, one in the Northern and one in the Southern. Each site will consist of several tens of Cherenkov telescopes of different sizes and will be equipped with about 10000 m{sup 2} of reflective surface. Because of its large size, the reflector of a Cherenkov telescope is composed of many individual mirror facets. Cherenkov telescopes operate without any protective system from weather conditions therefore it is important to understand how the reflective surfaces behave under different environmental conditions. This paper describes a study of the behavior of the mirrors in the presence of water vapor condensation. The operational time of a telescope is reduced by the presence of condensation on the mirror surface, therefore, to control and to monitor the formation of condensation is an important issue for IACT observatories. We developed a method based on pictures of the mirrors to identify the areas with water vapor condensation. The method is presented here and we use it to estimate the time and area two mirrors had condensation when exposed to the environmental conditions in the Argentinean site. The study presented here shows important guidelines in the selection procedure of mirror technologies and shows an innovative monitoring tool to be used in future Cherenkov telescopes.

  12. Undergraduate Research with a Small Radio Telescope

    Science.gov (United States)

    Fisher, P. L.; Williams, G. J.

    2001-11-01

    We describe the construction of a small radio telescope system at ULM and the role of radio astronomy in undergraduate education. The heart of the system is the Small Radio Telescope (SRT), which is a modified satellite TV antenna and custom receiver purchased from MIT Haystack Observatory. This telescope measures the brightness of many celestial objects at wavelengths near 21 cm. The system consists of various components to control dish movement, as well as perform analog to digital conversions allowing analysis of collected data. Undergraduate students have participated in the construction of the hardware and the task of interfacing the hardware to software on two GNU/Linux computer systems. The construction of the telescope and analysis of data allow the students to employ key concepts from mechanics, optics, electrodynamics, and thermodynamics, as well as computer and electronics skills. We will report preliminary results of solar observations conducted with this instrument and with the MIT Haystack Observatory 37m radio telescope. This work was supported by Louisiana Board of Regents grant LEQSF-ENH-UG-16, NASA/LaSPACE LURA R109139 and ULM Development Foundation Grant 97317.

  13. Remote wireless control for LAMOST telescope

    Science.gov (United States)

    Xu, Lingzhe; Xu, Xinqi

    2006-06-01

    The R and D of the Chinese 4-m ever-ambitious telescope, Large Sky Area Multi-Object Fiber Spectroscopic Telescope (LAMOST), has advanced towards a new stage, and first light is expected by the end of 2006. As one of national scientific and engineering projects the telescope will become national facility and accommodate maximum accessibility for public reach in general and for the astronomical community in particular. Thus remote or even robotic control of the telescope is put under careful exploration. With the rapid development of IT technology one of the fashions is the mobile telephone carried around by average people mainly for daily communication, and mobile notes application has become a real hit. This paper presents GSM based remote wireless application adapted to telescope control, which can be utilized for greatly enhancing LAMOST' accessibility. The novel technique has recently been developed in LAMOST control lab. Test has demonstrated successful execution of Monitor and Control (M and C) commands for LAMOST through remote wireless mobile. The hardware and software configuration with techniques involved for reliable and secure communication is outlined in this paper too.

  14. Habitable Exoplanet Imager Optical Telescope Concept Design

    Science.gov (United States)

    Stahl, H Philip

    2017-01-01

    The Habitable Exoplanet Imaging Mission (HabEx) is one of four missions under study for the 2020 Astrophysics Decadal Survey. Its goal is to directly image and spectroscopically characterize planetary systems in the habitable zone of Sun-like stars. Additionally, HabEx will perform a broad range of general astrophysics science enabled by 100 to 2500 nm spectral range and 3 x 3 arc-minute FOV. Critical to achieving the HabEx science goals is a large, ultra-stable UV/Optical/Near-IR (UVOIR) telescope. The baseline HabEx telescope is a 4-meter off-axis unobscured three-mirror-anastigmatic, diffraction limited at 400 nm with wavefront stability on the order of a few 10s of picometers. This paper summarizes the opto-mechanical design of the HabEx baseline optical telescope assembly, including a discussion of how science requirements drive the telescope's specifications, and presents analysis that the baseline telescope structure meets its specified tolerances.

  15. Simulation and track reconstruction for beam telescopes

    CERN Document Server

    Maqbool, Salman

    2017-01-01

    Beam telescopes are used for testing new detectors under development. Sensors are placed and a particle beam is passed through them. To test these novel detectors and determine their properties, the particle tracks need to be reconstructed from the known detectors in the telescope. Based on the reconstructed track, it’s predicted hits on the Device under Test (DUT) are compared with the actual hits on the DUT. Several methods exist for track reconstruction, but most of them don’t account for the effects of multiple scattering. General Broken Lines is one such algorithm which incorporates these effects during reconstruction. The aim of this project was to simulate the beam telescope and extend the track reconstruction framework for the FE-I4 telescope, which takes these effects into account. Section 1 introduces the problem, while section 2 focuses on beam telescopes. This is followed by the Allpix2 simulation framework in Section 3. And finally, Section 4 introduces the Proteus track reconstruction framew...

  16. In-the-Spectacle-Lens Telescopic Device

    Science.gov (United States)

    Peli, Eli; Vargas-Martín, Fernando

    2008-01-01

    Spectacle-mounted telescopic systems are prescribed for individuals with visual impairments. Bioptic telescopes are typically mounted toward the top of the spectacle lens (or above the frame) with the telescope eyepiece positioned above the wearer’s pupil. This allows the wearer to use up and down head tilt movements to quickly alternate between the unmagnified wide view (through the carrier lens) and the magnified narrow field-of-view (available through the eyepiece). Rejection of this visual aid has been attributed mainly to its appearance and to the limited field-of-view through the smaller Galilean designs. We designed a wide-field Keplerian telescope that is built completely within the spectacle lens. The design uses embedded mirrors inside the carrier lens for optical pathway folding and conventional lenses or curved mirrors for magnification power. The short height of the ocular, its position, and a small tilt of the ocular mirror enable the wearer to simultaneously view the magnified field above the unmagnified view of the uninterrupted horizontal field. These features improve the cosmetics and utility of the device. The in-the-lens design will allow the telescope to be mass-produced as a commodity ophthalmic lens blank that can be surfaced to include the wearer’s spectacle prescription. PMID:18601572

  17. The Telescope: Outline of a Poetic History

    Science.gov (United States)

    Stocchi, M. P.

    2011-06-01

    Amongst the first editions of Galileo's books, only the Saggiatore has on its frontispiece the image of the telescope. Indeed, the telescope is not pictured on the very emphatic frontispieces of the other books in which Galileo was presenting and defending the results achieved by his celestial observations, such as the Sidereus Nuncius. Many contemporary scientists denied the reliability of the telescope, and some even refused to look into the eyepiece. In the 16th and 17th century, the lenses, mirrors, and optical devices of extraordinary complexity did not have the main task of leading to the objective truth but obtaining the deformation of the reality by means of amazing effects of illusion. The Baroque art and literature had the aim of surprising, and the artists gave an enthusiastic support to the telescope. The poems in praise of Galileo's telescopic findings were quite numerous, including Adone composed by Giovanni Battista Marino, one of the most renowned poets of the time. The Galilean discoveries were actually accepted by the poets as ideologically neutral contributions to the "wonder" in spite they were rejected or even condemned by the scientists, philosophers, and theologians.

  18. Reliability-centered maintenance for ground-based large optical telescopes and radio antenna arrays

    Science.gov (United States)

    Marchiori, G.; Formentin, F.; Rampini, F.

    2014-07-01

    In the last years, EIE GROUP has been more and more involved in large optical telescopes and radio antennas array projects. In this frame, the paper describes a fundamental aspect of the Logistic Support Analysis (LSA) process, that is the application of the Reliability-Centered Maintenance (RCM) methodology for the generation of maintenance plans for ground-based large optical telescopes and radio antennas arrays. This helps maintenance engineers to make sure that the telescopes continue to work properly, doing what their users require them to do in their present operating conditions. The main objective of the RCM process is to establish the complete maintenance regime, with the safe minimum required maintenance, carried out without any risk to personnel, telescope and subsystems. At the same time, a correct application of the RCM allows to increase the cost effectiveness, telescope uptime and items availability, and to provide greater understanding of the level of risk that the organization is managing. At the same time, engineers shall make a great effort since the initial phase of the project to obtain a telescope requiring easy maintenance activities and simple replacement of the major assemblies, taking special care on the accesses design and items location, implementation and design of special lifting equipment and handling devices for the heavy items. This maintenance engineering framework is based on seven points, which lead to the main steps of the RCM program. The initial steps of the RCM process consist of: system selection and data collection (MTBF, MTTR, etc.), definition of system boundaries and operating context, telescope description with the use of functional block diagrams, and the running of a FMECA to address the dominant causes of equipment failure and to lay down the Critical Items List. In the second part of the process the RCM logic is applied, which helps to determine the appropriate maintenance tasks for each identified failure mode. Once

  19. The Cherenkov Telescope Array: Exploring the Very-high-energy Sky from ESO's Paranal Site

    Science.gov (United States)

    Hofmann, W.

    2017-06-01

    The Cherenkov Telescope Array (CTA) is a next-generation observatory for ground-based very-high-energy gamma-ray astronomy, using the imaging atmospheric Cherenkov technique to detect and reconstruct gamma-ray induced air showers. The CTA project is planning to deploy 19 telescopes on its northern La Palma site, and 99 telescopes on its southern site at Paranal, covering the 20 GeV to 300 TeV energy domain and offering vastly improved performance compared to currently operating Cherenkov telescopes. The combination of three different telescope sizes (23-, 12- and 4-metre) allows cost-effective coverage of the wide energy range. CTA will be operated as a user facility, dividing observation time between a guest observer programme and large Key Science Projects (KSPs), and the data will be made public after a one-year proprietary period. The history of the project, the implementation of the arrays, and some of the major science goals and KSPs, are briefly summarised.

  20. Design, fabrication, integration and commissioning of an upgraded guiding probe for the VLT unit telescope 4

    Science.gov (United States)

    Frank, Christoph; Hammersley, Peter; Buzzoni, Bernard; Manescau, Antonio; Arsenault, Robin; Madec, Pierre-Yves; Birkmann, Martin; Mueller, Michael; Salgado, Fernando; Guisard, Stephane; Kroedel, Matthias

    2014-07-01

    As part of the preparation for the arrival of the MUSE instrument to the VLT, it was required to adapt the hosting telescope (UT4) guide probe, to increase its back focal length. This is to allow enough space for the later deployment of the MUSE Adaptive Optics module GALACSI, in-between the telescope adapter rotator and the instrument itself. The UT guide probe is a critical component for the successful operation of the telescope, so its modification to increase the telescope's back focal length, while maintaining full compatibility with the existing operation model and other hardware, was rather demanding. The design, manufacture, assembly and test for the new supporting arm in the UT guiding probe is presented. It mixes the use of novel materials (HB-CESIC® for the mirrors substrates) and state of the art manufacturing techniques (3D printing mould production and rapid casting for the support structure), which allow producing easily a high performance subsystem. Characterization of the system prior delivery to the telescope, its integration in the UT and results after commissioning is presented. Its successful implementation has validated new manufacturing techniques that may prove very useful for future instruments development.

  1. First Steps Toward K-12 Teacher Professional Development Using Internet-based Telescopes

    Science.gov (United States)

    Berryhill, K. J.; Gershun, D.; Slater, T. F.; Armstrong, J. D.

    2012-12-01

    How can science teachers become more familiar with emerging technology, excite their students and give students a taste of astronomy research? Astronomy teachers do not always have research experience, so it is difficult for them to convey to students how researchers use telescopes. The nature of astronomical observation (e.g., remote sites, expensive equipment, and odd hours) has been a barrier to providing teachers with insight into the process. Robotic telescopes (operated automatically with queued observing schedules) and remotely controlled telescopes (controlled by the user via the Internet) allow scientists to conduct observing sessions on research-grade telescopes half a world away. The same technology can now be harnessed by STEM educators to engage students and reinforce what is being taught in the classroom, as seen in some early research in elementary schools (McKinnon and Mainwaring 2000 and McKinnon and Geissinger 2002), and middle/high schools (Sadler et al. 2001, 2007 and Gehret et al. 2005). However, teachers need to be trained to use these resources. Responding to this need, graduate students and faculty at the University of Wyoming and CAPER Center for Astronomy & Physics Education Research are developing teacher professional development programs using Internet-based telescopes. We conducted an online course in the science education graduate program at the University of Wyoming. This course was designed to sample different types of Internet-based telescopes to evaluate them as resources for teacher professional development. The 10 participants were surveyed at the end of the course to assess their experiences with each activity. In addition, pre-test/post-test data were collected focusing specifically on one of the telescopes (Gershun, Berryhill and Slater 2012). Throughout the course, the participants learned to use a variety of robotic and remote telescopes including SLOOH Space Camera (www.slooh.com), Sky Titan Observatory (www

  2. Innovative Resources for Education and Public Information: Electronic Services, Data and Information from NASA's Hubble Space Telescope and Other NASA Missions.

    Science.gov (United States)

    Christian, Carol A.

    The Space Telescope Science Institute (STScI), which supports the operation of the Hubble Space Telescope, is actively investigating and supporting innovative and experimental methods for improving science and math education content. The educational resources on the World Wide Web are derived from the latest data, scientific results, and advances…

  3. Astronomers Make First Images With Space Radio Telescope

    Science.gov (United States)

    1997-07-01

    Marking an important new milestone in radio astronomy history, scientists at the National Radio Astronomy Observatory (NRAO) in Socorro, New Mexico, have made the first images using a radio telescope antenna in space. The images, more than a million times more detailed than those produced by the human eye, used the new Japanese HALCA satellite, working in conjunction with the National Science Foundation's (NSF) Very Long Baseline Array (VLBA) and Very Large Array (VLA) ground-based radio telescopes. The landmark images are the result of a long-term NRAO effort supported by the National Aeronautics and Space Administration (NASA). "This success means that our ability to make detailed radio images of objects in the universe is no longer limited by the size of the Earth," said NRAO Director Paul Vanden Bout. "Astronomy's vision has just become much sharper." HALCA, launched on Feb. 11 by Japan's Institute of Space and Astronautical Science (ISAS), is the first satellite designed for radio astronomy imaging. It is part of an international collaboration led by ISAS and backed by NRAO; Japan's National Astronomical Observatory; NASA's Jet Propulsion Laboratory (JPL); the Canadian Space Agency; the Australia Telescope National Facility; the European VLBI Network and the Joint Institute for Very Long Baseline Interferometry in Europe. On May 22, HALCA observed a distant active galaxy called PKS 1519-273, while the VLBA and VLA also observed it. Data from the satellite was received by a tracking station at the NRAO facility in Green Bank, West Virginia. Tape-recorded data from the satellite and from the radio telescopes on the ground were sent to NRAO's Array Operations Center (AOC) in Socorro, NM. In Socorro, astronomers and computer scientists used a special-purpose computer to digitally combine the signals from the satellite and the ground telescopes to make them all work together as a single, giant radio telescope. This dedicated machine, the VLBA Correlator, built as

  4. A new ultra high energy gamma ray telescope at Ohya mine

    Science.gov (United States)

    Aoki, T.; Higashi, S.; Kamiya, Y.; Kitamura, T.; Matsuno, S.; Mizutani, K.; Mitsui, K.; Muraki, Y.; Okada, A.; Ohashi, Y.

    1985-01-01

    The search for ultra high energy gamma rays coming from point sources is one of the main experimental aims. A fast air shower timing system was constructed at ICRR for the study of the angular resolution of the system and operated approximately half a year. The characteristics of the surface array of Ohya air shower telescope is described.

  5. Gamma-ray burst science in the era of the Cherenkov Telescope Array

    NARCIS (Netherlands)

    Inoue, S.; Granof, J.; O'Brien, P.T.; Asano, K.; Bouvier, A.; Carosi, A.; Connaughton, V.; Garczarczyk, M.; Gilmore, R.; Hinton, J.; Inoue, Y.; Kakuwa, J.; Markoff, S.; Murase, K.; Osborne, J.P.; Nepomuk Otte, A.; Starling, R.; Tajima, H.; Teshima, M.; Toma, K.; Wagner, S.; Wijers, R.A.M.J.; Williams, D.A.; Yamamoto, T.; Yamazaki, R.

    2013-01-01

    We outline the science prospects for gamma-ray bursts (GRBs) with the Cherenkov Telescope Array (CTA), the next-generation ground-based gamma-ray observatory operating at energies above few tens of GeV. With its low energy threshold, large effective area and rapid slewing capabilities, CTA will be

  6. The World Space Observatory - Ultraviolet (WSO-UV Space Telescope; Status Update in 2013

    Directory of Open Access Journals (Sweden)

    Ana I. Gómez de Castro

    2014-12-01

    Full Text Available This is a short primer and a brief update on the status of the World Space Observatory-Ultraviolet (WSO-UV project dated in May 2013. WSO-UV is a 170m primary space telescope equipped for ultraviolet imaging and spectroscopy that will be operational in 2017 hosting an open science program for the world-wide scientic community.

  7. The ANTARES Deep-Sea Neutrino Telescope: Status and First Results

    OpenAIRE

    Coyle, Paschal

    2010-01-01

    Various aspects of the construction, operation and calibration of the recently completed deep-sea ANTARES neutrino telescope are described. Some first results obtained with a partial five line configuration are presented, including depth dependence of the atmospheric muon rate, the search for point-like cosmic neutrino sources and the search for dark matter annihilation in the Sun.

  8. Slewing Mirror Telescope and the Data-Acquisition System for the UFFO-Pathfinder

    DEFF Research Database (Denmark)

    Lim, H.; Ahmad, S.; Barrillon, P.

    2013-01-01

    -coupled device. There is a key board called the UFFO Data Acquisition system (UDAQ) that manages the communication of each telescope and also of the satellite and the UFFO overall operation. This pathfinder is designed and built within the limited size and weight of ~20 kg and the low power consumption up to ~30...

  9. High-Energy Neutrino Flux Studied in the ANTARES Deep-Sea Telescope

    NARCIS (Netherlands)

    Löhner, Herbert; Steadman, SG; Stephans, GSF; Taylor, FE

    2012-01-01

    High-energy neutrinos from cosmic origin appear to be ideal probes for long-distance astronomy and may provide insight into cosmic particle acceleration mechanisms. The ANTARES deep-sea neutrino telescope, fully operational since May 2008, aims at the detection of upgoing muon tracks caused by high

  10. Toward active x-ray telescopes II

    Science.gov (United States)

    O'Dell, Stephen L.; Aldcroft, Thomas L.; Atkins, Carolyn; Button, Timothy W.; Cotroneo, Vincenzo; Davis, William N.; Doel, Peter; Feldman, Charlotte H.; Freeman, Mark D.; Gubarev, Mikhail V.; Johnson-Wilke, Raegan L.; Kolodziejczak, Jeffery J.; Lillie, Charles F.; Michette, Alan G.; Ramsey, Brian D.; Reid, Paul B.; Rodriguez Sanmartin, Daniel; Saha, Timo T.; Schwartz, Daniel A.; Trolier-McKinstry, Susan E.; Ulmer, Melville P.; Wilke, Rudeger H. T.; Willingale, Richard; Zhang, William W.

    2012-10-01

    In the half century since the initial discovery of an astronomical (non-solar) x-ray source, the observation time required to achieve a given sensitivity has decreased by eight orders of magnitude. Largely responsible for this dramatic progress has been the refinement of the (grazing-incidence) focusing x-ray telescope, culminating with the exquisite subarcsecond imaging performance of the Chandra X-ray Observatory. The future of x-ray astronomy relies upon the development of x-ray telescopes with larger aperture areas (technologically challenging—requiring precision fabrication, alignment, and assembly of large areas (x-ray optics. This paper discusses relevant programmatic and technological issues and summarizes current progress toward active x-ray telescopes.

  11. Perceptual image quality and telescope performance ranking

    Science.gov (United States)

    Lentz, Joshua K.; Harvey, James E.; Marshall, Kenneth H.; Salg, Joseph; Houston, Joseph B.

    2010-08-01

    Launch Vehicle Imaging Telescopes (LVIT) are expensive, high quality devices intended for improving the safety of vehicle personnel, ground support, civilians, and physical assets during launch activities. If allowed to degrade from the combination of wear, environmental factors, and ineffective or inadequate maintenance, these devices lose their ability to provide adequate quality imagery to analysts to prevent catastrophic events such as the NASA Space Shuttle, Challenger, accident in 1986 and the Columbia disaster of 2003. A software tool incorporating aberrations and diffraction that was developed for maintenance evaluation and modeling of telescope imagery is presented. This tool provides MTF-based image quality metric outputs which are correlated to ascent imagery analysts' perception of image quality, allowing a prediction of usefulness of imagery which would be produced by a telescope under different simulated conditions.

  12. Nearby Exo-Earth Astrometric Telescope (NEAT)

    Science.gov (United States)

    Shao, M.; Nemati, B.; Zhai, C.; Goullioud, R.

    2011-01-01

    NEAT (Nearby Exo ]Earths Astrometric Telescope) is a modest sized (1m diameter telescope) It will be capable of searching approx 100 nearby stars down to 1 Mearth planets in the habitable zone, and 200 @ 5 Mearth, 1AU. The concept addresses the major issues for ultra -precise astrometry: (1) Photon noise (0.5 deg dia field of view) (2) Optical errors (beam walk) with long focal length telescope (3) Focal plane errors , with laser metrology of the focal plane (4) PSF centroiding errors with measurement of the "True" PSF instead of using a "guess " of the true PSF, and correction for intra pixel QE non-uniformities. Technology "close" to complete. Focal plane geometry to 2e-5 pixels and centroiding to approx 4e -5 pixels.

  13. Template analysis for the MAGIC telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Menzel, Uta [Max-Planck-Institut fuer Physik, Muenchen (Germany); Collaboration: MAGIC-Collaboration

    2016-07-01

    The MAGIC telescopes are two 17-m-diameter Imaging Air Cherenkov Telescopes located on the Canary island of La Palma. They record the Cherenkov light from air showers induced by very high energy photons. The current data analysis uses a parametrization of the two shower images (including Hillas parameters) to determine the characteristics of the primary particle. I am implementing an advanced analysis method that compares shower images on a pixel basis with template images based on Monte Carlo simulations. To reduce the simulation effort the templates contain only pure shower images that are convolved with the telescope response later in the analysis. The primary particle parameters are reconstructed by maximizing the likelihood of the template. By using all the information available in the shower images, the performance of MAGIC is expected to improve. In this presentation I will explain the general idea of a template-based analysis and show the first results of the implementation.

  14. Telescopic nanotube device for hot nanolithography

    Science.gov (United States)

    Popescu, Adrian; Woods, Lilia M

    2014-12-30

    A device for maintaining a constant tip-surface distance for producing nanolithography patterns on a surface using a telescopic nanotube for hot nanolithography. An outer nanotube is attached to an AFM cantilever opposite a support end. An inner nanotube is telescopically disposed within the outer nanotube. The tip of the inner nanotube is heated to a sufficiently high temperature and brought in the vicinity of the surface. Heat is transmitted to the surface for thermal imprinting. Because the inner tube moves telescopically along the outer nanotube axis, a tip-surface distance is maintained constant due to the vdW force interaction, which in turn eliminates the need of an active feedback loop.

  15. The Cherenkov Telescope Array production system for Monte Carlo simulations and analysis

    Science.gov (United States)

    Arrabito, L.; Bernloehr, K.; Bregeon, J.; Cumani, P.; Hassan, T.; Haupt, A.; Maier, G.; Moralejo, A.; Neyroud, N.; pre="for the"> CTA Consortium, DIRAC Consortium,

    2017-10-01

    The Cherenkov Telescope Array (CTA), an array of many tens of Imaging Atmospheric Cherenkov Telescopes deployed on an unprecedented scale, is the next-generation instrument in the field of very high energy gamma-ray astronomy. An average data stream of about 0.9 GB/s for about 1300 hours of observation per year is expected, therefore resulting in 4 PB of raw data per year and a total of 27 PB/year, including archive and data processing. The start of CTA operation is foreseen in 2018 and it will last about 30 years. The installation of the first telescopes in the two selected locations (Paranal, Chile and La Palma, Spain) will start in 2017. In order to select the best site candidate to host CTA telescopes (in the Northern and in the Southern hemispheres), massive Monte Carlo simulations have been performed since 2012. Once the two sites have been selected, we have started new Monte Carlo simulations to determine the optimal array layout with respect to the obtained sensitivity. Taking into account that CTA may be finally composed of 7 different telescope types coming in 3 different sizes, many different combinations of telescope position and multiplicity as a function of the telescope type have been proposed. This last Monte Carlo campaign represented a huge computational effort, since several hundreds of telescope positions have been simulated, while for future instrument response function simulations, only the operating telescopes will be considered. In particular, during the last 18 months, about 2 PB of Monte Carlo data have been produced and processed with different analysis chains, with a corresponding overall CPU consumption of about 125 M HS06 hours. In these proceedings, we describe the employed computing model, based on the use of grid resources, as well as the production system setup, which relies on the DIRAC interware. Finally, we present the envisaged evolutions of the CTA production system for the off-line data processing during CTA operations and

  16. Measurement of neutron energy spectra for Eg=23.1 and 26.6 MeV mono-energetic photon induced reaction on natC using laser electron photon beam at NewSUBARU

    Directory of Open Access Journals (Sweden)

    Itoga Toshiro

    2017-01-01

    Full Text Available Photo-neutron energy spectra for Eg=23.1 and 26.6 MeV mono-energetic photons on natC were measured using laser Compton scattering facility at NewSUBARU BL01. The photon energy spectra were evaluated through measurements and simulations with collimator sizes and arrangements for the laser electron photon. The neutron energy spectra for the natC(g,xn reaction were measured at 60 degrees in horizontal and 90 degrees in horizontal and vertical with respect to incident photon. The spectra show almost isotropic angular distribution and flat energy distribution from detection threshold to upper limit defined by reaction Q-value.

  17. Construction of the Advanced Technology Solar Telescope

    Science.gov (United States)

    Rimmele, T. R.; Keil, S.; McMullin, J.; Knölker, M.; Kuhn, J. R.; Goode, P. R.; Rosner, R.; Casini, R.; Lin, H.; Tritschler, A.; Wöger, F.; ATST Team

    2012-12-01

    The 4m Advance Technology Solar Telescope (ATST) will be the most powerful solar telescope and the world's leading ground-based resource for studying solar magnetism that controls the solar wind, flares, coronal mass ejections and variability in the Sun's output. The project has entered its construction phase. Major subsystems have been contracted. As its highest priority science driver ATST shall provide high resolution and high sensitivity observations of the dynamic solar magnetic fields throughout the solar atmosphere, including the corona at infrared wavelengths. With its 4m aperture, ATST will resolve features at 0.″03 at visible wavelengths and obtain 0.″1 resolution at the magnetically highly sensitive near infrared wavelengths. A high order adaptive optics system delivers a corrected beam to the initial set of state-of-the-art, facility class instrumentation located in the Coudé laboratory facility. The initial set of first generation instruments consists of five facility class instruments, including imagers and spectro-polarimeters. The high polarimetric sensitivity and accuracy required for measurements of the illusive solar magnetic fields place strong constraints on the polarization analysis and calibration. Development and construction of a four-meter solar telescope presents many technical challenges, including thermal control of the enclosure, telescope structure and optics and wavefront control. A brief overview of the science goals and observational requirements of the ATST will be given, followed by a summary of the design status of the telescope and its instrumentation, including design status of major subsystems, such as the telescope mount assembly, enclosure, mirror assemblies, and wavefront correction

  18. DESTINY, The Dark Energy Space Telescope

    Science.gov (United States)

    Pasquale, Bert A.; Woodruff, Robert A.; Benford, Dominic J.; Lauer, Tod

    2007-01-01

    We have proposed the development of a low-cost space telescope, Destiny, as a concept for the NASA/DOE Joint Dark Energy Mission. Destiny is a 1.65m space telescope, featuring a near-infrared (0.85-1.7m) survey camera/spectrometer with a moderate flat-field field of view (FOV). Destiny will probe the properties of dark energy by obtaining a Hubble diagram based on Type Ia supernovae and a large-scale mass power spectrum derived from weak lensing distortions of field galaxies as a function of redshift.

  19. Weizmann Fast Astronomical Survey Telescope (WFAST)

    Science.gov (United States)

    Nir, Guy; Ofek, Eran Oded; Ben-Ami, Sagi; Manulis, Ilan; Gal-Yam, Avishay; Diner, Oz; Rappaport, Michael

    2017-01-01

    The Weizmann Fast Astronomical Survey Telescope (W-FAST) is an experiment designed to explore variability on sub-second time scales. When completed it will consist of two robotic 55-cm f/2 Schmidt telescopes. The optics is capable of providing $\\sim0.5$" image quality over 23 deg$^2$. The focal plane will be equipped with fast readout, low read-noise sCMOS detectors. The first generation focal plane is expected to have 6.2 deg$^2$ field of view. WFAST is designed to study occultations by solar system objects (KBOs and Oort cloud objects), short time scale stellar variability, and high resolution imaging via proper coaddition.

  20. Status of the GroundBIRD Telescope

    Science.gov (United States)

    Choi, J.; Génova-Santos, R.; Hattori, M.; Hazumi, M.; Ishitsuka, H.; Kanno, F.; Karatsu, K.; Kiuchi, K.; Koyano, R.; Kutsuma, H.; Lee, K.; Mima, S.; Minowa, M.; Nagai, M.; Nagasaki, T.; Naruse, M.; Oguri, S.; Okada, T.; Otani, C.; Rebolo, R.; Rubiño-Martín, J.; Sekimoto, Y.; Suzuki, J.; Taino, T.; Tajima, O.; Tomita, N.; Uchida, T.; Won, E.; Yoshida, M.

    2018-01-01

    Our understanding of physics at very early Universe, as early as 10-35 s after the Big Bang, relies on the scenario known as the inflationary cosmology. Inflation predicts a particular polarization pattern in the cosmic microwave background, known as the B-mode yet the strength of such polarization pattern is extremely weak. To search for the B-mode of the polarization in the cosmic microwave background, we are constructing an off-axis rotating telescope to mitigate systematic effects as well as to maximize the sky coverage of the observation. We will discuss the present status of the GroundBIRD telescope.

  1. Telescope Pointing Based in Inertial Measurment Unit

    Science.gov (United States)

    Vujičić, D.; Pavlović, R.; Cvetković, Z., Randjić, S.; Jagodić, D.

    2017-06-01

    In this paper we study the problem of how to determine the coordinates of a point a telescope is directed to on the basis of data obtained from a 9DOF sensor board. On the 9DOF sensor board there are three sensors: the gyroscope, accelerometer and magnetometer. By combining the data from all the three sensors one obtains the Eulerian angles in the system tied to the sensor board. The Eulerian angles are transformed into the horizontal and equatorial coordinates in order to obtain the point the telescope is directed to.

  2. Revisiting the Effectiveness of Large Optical Telescopes

    Directory of Open Access Journals (Sweden)

    V. V. Sychev

    2015-01-01

    Full Text Available To create large-size optical telescopes, various design concepts have been used. Each concept inevitably faced the challenge to optimize technical characteristics and parameters of the telescope. There was always a question: what concept to choose, how to estimate efficiency of such telescopes and by what criteria and how to estimate expediency of this or that project of the large-size telescope. It is, obviously, insufficient to make a resolution-based estimation. An estimate by the angular field size is inappropriate too. Well, it may be also an estimate by the stellar magnitude. All these criteria are related to each other. Improvement of one of these parameters inevitably leads to deterioration of the others. Obviously, the certain generalized criterion considering all parameters and features of the design concept of the large-size telescope is necessary here. As such can serve the criterion of informational content of the telescope.The article offers a complex criterion allowing not only to estimate efficiency of large-size optical telescopes, but also to compare their conceptual and technological level among themselves in terms of obtaining information.The article suggests a new term, i.e. the informational content invariant to characterize informative capacities of the chosen concept and of the realizing technology. It will allow us to avoid unjustified complications of technical solutions, wrong accents in designing and excess material inputs when developing the project.The informational content criterion-based analysis of the existing projects of large-size telescopes has been convincingly shown that, conceptually, there are three best telescopes, namely: GSMT, CELT, and ACT-25. And, in terms of informational content, the АCТ-25 is 10 times more than GSMT and CELT, and the existing Keck-telescope exceeds by 30 times. Hence, it is hard to escape a conclusion that it is more favourable to implement one ACT-25, than to do 10 GSMT or CELT

  3. Cooling strategies and thermal analysis of a module of the NA60 silicon tracking telescope

    CERN Document Server

    Vila-Nova-Goncalves, L

    2003-01-01

    This note reports on the thermal studies performed on the silicon tracking telescope used in the NA60 experiment during the runs with the proton beam. To ensure adequate operating conditions, it is of the uppermost importance that the heat dissipated by the electronics doesn't provoke unacceptable temperatures on the telescope sensors. Furthermore, to prevent damages in the circuits, condensation should, as well, be avoided. After a brief description of the modules, the issues related to the cooling strategy are addressed. The model for the study, made using a CFD (Computational Fluid Dynamics) code, is then presented and the results and conclusions of the simulations will follow.

  4. Initial contamination control considerations for the Next Generation Space Telescope (NGST)

    Science.gov (United States)

    Wooldridge, Eve M.

    1997-01-01

    The NASA's Next Generation Space Telescope (NGST), a 6 m to 8 m diameter device, is described. The NGST will be radiatively cooled to 30 K to 60 K in order to carry out extremely deep exposures at near infrared wavelengths, for 5 years to 10 years lifetime. Initial contamination control design options include strict materials selection and baking out of both hardware down to the component level, minimizing or eliminating the exposure to the optical telescope assembly to sunlight or earth albedo during deployment and early in-orbit operations.

  5. Effects of Contamination Upon the Performance of X-Ray Telescopes

    Science.gov (United States)

    O'Dell, Stephen L.; Elsner, Ronald F.; Oosterbroek, Tim

    2010-01-01

    Particulate and molecular contamination can each impact the performance of x-ray telescope systems. Furthermore, any changes in the level of contamination between on-ground calibration and in-space operation can compromise the validity of the calibration. Thus, it is important to understand the sensitivity of telescope performance, especially the net effective area and the wings of the point spread function to contamination. Here, we quantify this sensitivity and discuss the flow-down of science requirements to contamination-control requirements. As an example, we apply this methodology to the International X-ray Observatory (IXO), currently under joint study by ESA, JAXA, and NASA.

  6. The Galileo project - A 3.5 M Italian telescope facility

    Science.gov (United States)

    Barbieri, Cesare

    1989-10-01

    The Galileo project comprises the design, building, and operation of a 3.5-m Italian telescope, the main elements (diameter, mechanical stucture, active optics, etc.) of which consist of a duplication of the ESO New Technology Telescope (NTT). Modifications have been introduced in order to allow, beyond the f/11 Nasmyth foci, a prime focus f/2.2 station, a trapped f/6 focus, and a small Cassegrain f/20 facility. Other changes with respect to the NTT have been made to the control and data acquisition system, and to the service building.

  7. Digital Receivers for Low-Frequency Radio Telescopes UTR-2, URAN, GURT

    Science.gov (United States)

    Zakharenko, V.; Konovalenko, A.; Zarka, P.; Ulyanov, O.; Sidorchuk, M.; Stepkin, S.; Koliadin, V.; Kalinichenko, N.; Stanislavsky, A.; Dorovskyy, V.; Shepelev, V.; Bubnov, I.; Yerin, S.; Melnik, V.; Koval, A.; Shevchuk, N.; Vasylieva, I.; Mylostna, K.; Shevtsova, A.; Skoryk, A.; Kravtsov, I.; Volvach, Y.; Plakhov, M.; Vasilenko, N.; Vasylkivskyi, Y.; Vavriv, D.; Vinogradov, V.; Kozhin, R.; Kravtsov, A.; Bulakh, E.; Kuzin, A.; Vasilyev, A.; Ryabov, V.; Reznichenko, A.; Bortsov, V.; Lisachenko, V.; Kvasov, G.; Mukha, D.; Litvinenko, G.; Brazhenko, A.; Vashchishin, R.; Pylaev, O.; Koshovyy, V.; Lozinsky, A.; Ivantyshyn, O.; Rucker, H. O.; Panchenko, M.; Fischer, G.; Lecacheux, A.; Denis, L.; Coffre, A.; Grießmeier, J.-M.

    2016-03-01

    This paper describes digital radio astronomical receivers used for decameter and meter wavelength observations. Since 1998, digital receivers performing on-the-fly dynamic spectrum calculations or waveform data recording without data loss have been used at the UTR-2 radio telescope, the URAN VLBI system, and the GURT new generation radio telescope. Here, we detail these receivers developed for operation in the strong interference environment that prevails in the decameter wavelength range. Data collected with these receivers allowed us to discover numerous radio astronomical objects and phenomena at low frequencies, a summary of which is also presented.

  8. An afocal telescope configuration for the ESA ARIEL mission

    Science.gov (United States)

    Da Deppo, Vania; Focardi, Mauro; Middleton, Kevin; Morgante, Gianluca; Pascale, Enzo; Grella, Samuele; Pace, Emanuele; Claudi, Riccardo; Amiaux, Jérôme; Colomé Ferrer, Josep; Hunt, Thomas; Rataj, Miroslaw; Sierra-Roig, Carles; Ficai Veltroni, Iacopo; Eccleston, Paul; Micela, Giuseppina; Tinetti, Giovanna

    2017-12-01

    Atmospheric Remote-Sensing Infrared Exoplanet Large Survey (ARIEL) is a candidate as an M4 ESA mission to launch in 2026. During its 3.5 years of scientific operations, ARIEL will observe spectroscopically in the infrared (IR) a large population of known transiting planets in the neighbourhood of the solar system. ARIEL aims to give a breakthrough in the observation of exoplanet atmospheres and understanding of the physics and chemistry of these far-away worlds. ARIEL is based on a 1 m class telescope feeding a collimated beam into two separate instrument modules: a spectrometer module covering the waveband between 1.95 and 7.8 μm and a combined fine guidance system/visible photometer/NIR spectrometer. The telescope configuration is a classic Cassegrain layout used with an eccentric pupil and coupled to a tertiary off-axis paraboloidal mirror. To constrain the thermo-mechanically induced optical aberrations, the primary mirror (M1) temperature will be monitored and finely tuned using an active thermal control system based on thermistors and heaters. They will be switched on and off to maintain the M1 temperature within ± 1 K by the telescope control unit (TCU). The TCU is a payload electronics subsystem also responsible for the thermal control of the spectrometer module detectors as well as the secondary mirror mechanism and IR calibration source management. The TCU, being a slave subsystem of the instrument control unit, will collect the housekeeping data from the monitored subsystems and will forward them to the master unit. The latter will run the application software, devoted to the main spectrometer management and to the scientific data on-board processing.

  9. Education and Outreach with the Northwest Indiana Robotic Telescope

    Science.gov (United States)

    Rengstorf, Adam W.; Slavin, S. D.

    2011-01-01

    The Northwest Indiana Robotic (NIRo) Telescope is being used to completely revise the introductory astronomy laboratory experiments at Purdue University Calumet (PUC). The NIRo telescope is a new 20-inch RC telescope. It was dedicated in Aug 2010, is designed to be operated remotely and/or robotically, and is located 30 miles south of PUC's campus in rural Lake county, IN. A suite of laboratory experiments is being developed and piloted during the 2010-2011 academic year. Lab experiments will progress from introductions to instruments and software, through simple data visualization and analysis, to developing and submitting an observing plan to complete multi-week laboratories. Experiments for both the solar system course and the stars & galaxies are being developed. Students in the solar system course will request and analyze images for such experiments as recreating Aristarchus’ relative size & distance calculations, establishing an observing strategy to monitor the Galilean satellites & determine Jupiter's mass, an ongoing `asteroid hunt', Martian retrograde motion, and Venusian phases. The stars & galaxies course will complete labs on galaxy morphology, eclipsing binaries, building an HR-diagram, cluster aging, and distances to Cepheid variables. The main outreach component is the development of a primary education program. In conjunction with the PUC School of Education and area middle-school science teachers, we are in the process of identifying the subset of laboratory ideas best suited to the State of Indiana Earth & Space Science teaching standards from grades 6 - 8. These laboratories are being developed into finished data products, curricula, and learning modules appropriate for the middle school classroom. The middle school classroom will be able to request observations and retrieve reduced images via an internet portal, currently in development. This project has been funded by NSF award #DUE-0736592.

  10. Building large telescopes in orbit using small satellites

    Science.gov (United States)

    Saunders, Chris; Lobb, Dan; Sweeting, Martin; Gao, Yang

    2017-12-01

    In many types of space mission there is a constant desire for larger and larger instrument apertures, primarily for the purposes of increased resolution or sensitivity. In the Radio Frequency domain, this is currently addressed by antennas that unfold or deploy on-orbit. However, in the optical and infrared domains, this is a significantly more challenging problem, and has up to now either been addressed by simply having large monolithic mirrors (which are fundamentally limited by the volume and mass lifting capacity of any launch vehicle) or by complex 'semi-folding' designs such as the James Webb Space Telescope. An alternative is to consider a fractionated instrument which is launched as a collection of individual smaller elements which are then assembled (or self-assemble) once in space, to form a much larger overall instrument. SSTL has been performing early concept assessment work on such systems for high resolution science observations from high orbits (potentially also for persistent surveillance of Earth). A point design of a 25 m sparse aperture (annular ring) telescope is presented. Key characteristics of 1) multiple small elements launched separately and 2) on-orbit assembly to form a larger instrument are included in the architecture. However, on-orbit assembly brings its own challenges in terms of guidance navigation and control, robotics, docking mechanisms, system control and data handling, optical alignment and stability, and many other elements. The number and type of launchers used, and the technologies and systems used heavily affect the outcome and general cost of the telescope. The paper describes one of the fractionated architecture concepts currently being studied by SSTL, including the key technologies and operational concepts that may be possible in the future.

  11. An enterprise software architecture for the Green Bank Telescope (GBT)

    Science.gov (United States)

    Radziwill, Nicole M.; Mello, Melinda; Sessoms, Eric; Shelton, Amy

    2004-09-01

    The enterprise architecture presents a view of how software utilities and applications are related to one another under unifying rules and principles of development. By constructing an enterprise architecture, an organization will be able to manage the components of its systems within a solid conceptual framework. This largely prevents duplication of effort, focuses the organization on its core technical competencies, and ultimately makes software more maintainable. In the beginning of 2003, several prominent challenges faced software development at the GBT. The telescope was not easily configurable, and observing often presented a challenge, particularly to new users. High priority projects required new experimental developments on short time scales. Migration paths were required for applications which had proven difficult to maintain. In order to solve these challenges, an enterprise architecture was created, consisting of five layers: 1) the telescope control system, and the raw data produced during an observation, 2) Low-level Application Programming Interfaces (APIs) in C++, for managing interactions with the telescope control system and its data, 3) High-Level APIs in Python, which can be used by astronomers or software developers to create custom applications, 4) Application Components in Python, which can be either standalone applications or plug-in modules to applications, and 5) Application Management Systems in Python, which package application components for use by a particular user group (astronomers, engineers or operators) in terms of resource configurations. This presentation describes how these layers combine to make the GBT easier to use, while concurrently making the software easier to develop and maintain.

  12. An afocal telescope configuration for the ESA ARIEL mission

    Science.gov (United States)

    Da Deppo, Vania; Focardi, Mauro; Middleton, Kevin; Morgante, Gianluca; Pascale, Enzo; Grella, Samuele; Pace, Emanuele; Claudi, Riccardo; Amiaux, Jérôme; Colomé Ferrer, Josep; Hunt, Thomas; Rataj, Miroslaw; Sierra-Roig, Carles; Ficai Veltroni, Iacopo; Eccleston, Paul; Micela, Giuseppina; Tinetti, Giovanna

    2017-11-01

    Atmospheric Remote-Sensing Infrared Exoplanet Large Survey (ARIEL) is a candidate as an M4 ESA mission to launch in 2026. During its 3.5 years of scientific operations, ARIEL will observe spectroscopically in the infrared (IR) a large population of known transiting planets in the neighbourhood of the solar system. ARIEL aims to give a breakthrough in the observation of exoplanet atmospheres and understanding of the physics and chemistry of these far-away worlds. ARIEL is based on a 1 m class telescope feeding a collimated beam into two separate instrument modules: a spectrometer module covering the waveband between 1.95 and 7.8 μm and a combined fine guidance system/visible photometer/NIR spectrometer. The telescope configuration is a classic Cassegrain layout used with an eccentric pupil and coupled to a tertiary off-axis paraboloidal mirror. To constrain the thermo-mechanically induced optical aberrations, the primary mirror (M1) temperature will be monitored and finely tuned using an active thermal control system based on thermistors and heaters. They will be switched on and off to maintain the M1 temperature within ± 1 K by the telescope control unit (TCU). The TCU is a payload electronics subsystem also responsible for the thermal control of the spectrometer module detectors as well as the secondary mirror mechanism and IR calibration source management. The TCU, being a slave subsystem of the instrument control unit, will collect the housekeeping data from the monitored subsystems and will forward them to the master unit. The latter will run the application software, devoted to the main spectrometer management and to the scientific data on-board processing.

  13. Building ISOC Status Displays for the Large AreaTelescope aboard the Gamma Ray Large Area Space Telescope (GLAST) Observatory

    Energy Technology Data Exchange (ETDEWEB)

    Ketchum, Christina; /SLAC

    2006-09-01

    In September 2007 the Gamma Ray Large Area Space Telescope (GLAST) is scheduled to launch aboard a Delta II rocket in order to put two high-energy gamma-ray detectors, the Large Area Telescope (LAT) and the GLAST Burst Monitor (GBM) into low earth orbit. The Instrument Science Operations Center (ISOC) at SLAC is responsible for the LAT operations for the duration of the mission, and will therefore build an operations center including a monitoring station at SLAC to inform operations staff and visitors of the status of the LAT instrument and GLAST. This monitoring station is to include sky maps showing the location of GLAST in its orbit as well as the LAT's projected field of view on the sky containing known gamma-ray sources. The display also requires a world map showing the locations of GLAST and three Tracking and Data Relay Satellites (TDRS) relative to the ground, their trail lines, and ''footprint'' circles indicating the range of communications for each satellite. The final display will also include a space view showing the orbiting and pointing information of GLAST and the TDRS satellites. In order to build the displays the astronomy programs Xephem, DS9, SatTrack, and STK were employed to model the position of GLAST and pointing information of the LAT instrument, and the programming utilities Python and Cron were used in Unix to obtain updated information from database and load them into the programs at regular intervals. Through these methods the indicated displays were created and combined to produce a monitoring display for the LAT and GLAST.

  14. Choosing and Using a Refracting Telescope

    CERN Document Server

    English, Neil

    2011-01-01

    The refracting telescope has a long and illustrious past. Here’s what the author says about early telescopes and today’s refractors: “Four centuries ago, a hitherto obscure Italian scientist turned a home-made spyglass towards the heavens. The lenses he used were awful by modern standards, inaccurately figured and filled with the scars of their perilous journey from the furnace to the finishing workshop. Yet, despite these imperfections, they allowed him to see what no one had ever seen before – a universe far more complex and dynamic than anyone had dared imagine. But they also proved endlessly useful in the humdrum of human affairs. For the first time ever, you could spy on your neighbor from a distance, or monitor the approach of a war-mongering army, thus deciding the fate of nations. “The refractor is without doubt the prince of telescopes. Compared with all other telescopic designs, the unobstructed view of the refractor enables it to capture the sharpest, highest contrast images and the wides...

  15. The Science and Art of Using Telescopes

    CERN Document Server

    Pugh, Philip

    2009-01-01

    Explains how to select equipment that is at the 'next level', and describes how to use more advanced telescopes and accessories. This book includes a section on imaging and equipment that range from regular digital cameras, through web cams, to specialized chilled-chip CCD cameras

  16. Introduction to the Solar Space Telescope

    Indian Academy of Sciences (India)

    The design of the space solar telescope (SST) (phase B) has been completed. The manufacturing is under development. At the end of 2000, it will be assembled. The basic aspect will be introduced in this paper. Author Affiliations. G. Ai1 S. Jin1 S. Wang1 B. Ye1 S. Yang1. Beijing Astronomical Observatory / National ...

  17. Taming the 1.2 m Telescope

    Science.gov (United States)

    Griffin, S.; Edwards, M.; Greenwald, D.; Kono, D.; Liang, D.; Lohnes, K.; Wright, V.; Spillar, E.

    2013-09-01

    Achievable residual jitter on the 1.2 m telescope at MSSS shown in Figure 1 has historically been limited to 10-20 arc-sec. peak in moderate wind conditions due to the combination of the dynamics associated with the twin telescopes on the common declination axis shaft, and the related control system behavior. Figure 1 1.2 m Telescope The lightly damped, low frequency fundamental vibration mode shape of the telescopes rotating out of phase on the common declination axis shaft severely degraded the performance of the prior controllers. This vibration mode is easily excited by external forces such as wind loading and internal torque commands from the mount control system. The relatively poor historic performance was due to a combination of the low error rejection of external disturbances, and the controller exciting the mode. A radical new approach has been implemented that has resulted in a decrease of jitter to less than 1 arcsec under most conditions. The new approach includes minor hardware modifications to provide active damping with accelerometers as feedback sensors. This architecture has allowed a bandwidth increase of almost an order of magnitude and eliminated the large amplitude motions at the mode natural frequency, resulting in much improved pointing and jitter performance. A representative comparison of historical versus new architecture performance is shown in Figure 2 for the declination axis.

  18. The telescopic tourist's guide to the Moon

    CERN Document Server

    May, Andrew

    2017-01-01

    Whether you’re interested in visiting Apollo landing sites or the locations of classic sci-fi movies, this is the tourist guide for you! This tourist guide has a twist – it is a guide to a whole different world, which you can visit from the comfort of your backyard with the aid of nothing more sophisticated than an inexpensive telescope. It tells you the best times to view the Moon, the most exciting sights to look out for, and the best equipment to use, allowing you to snap stunning photographs as well as view the sights with your own eyes. Have you ever been inspired by stunning images from the Hubble telescope, or the magic of sci-fi special effects, only to look through a small backyard telescope at the disappointing white dot of a planet or faint blur of a galaxy? Yet the Moon is different. Seen through even a relatively cheap telescope, it springs into life like a real place, with mountains and valleys and rugged craters. With a bit of imagination, you can even picture yourself as a sightseeing visi...

  19. Go-To Telescopes Under Suburban Skies

    CERN Document Server

    Monks, Neale

    2010-01-01

    For the last four centuries stargazers have turned their telescopes to the night skies to look at its wonders, but only in this age of computers has it become possible to let the telescope find for you the object you are looking for! So-called “go-to” telescopes are programmed with the locations of thousands of objects, including dazzling distant Suns, stunning neighboring galaxies, globular and open star clusters, the remnants of past supernovae, and many other breathtaking sights. This book does not tell you how to use your Go-to telescope. Your manual will help you do that. It tells you what to look for in the deep sky and why, and what equipment to best see it with. Organized broadly by what is best for viewing in the northern hemisphere in different seasons, Monks further divides the sights of each season into groupings such as “Showpiece Objects,” “Interesting Deep Sky Objects,” and “Obscure and Challenging Deep Sky Objects.” He also tells what objects are visible even in light-polluted ...

  20. Teaching a Course about the Space Telescope.

    Science.gov (United States)

    Page, Thornton

    1983-01-01

    "Astronomy with the Space Telescope" is a course designed to show scientists/engineers how this instrument can make important advances in astrophysics, planetology, and geophysics. A description of the course (taught to 11 students working for the National Aeronautics and Space Administration) and sample student paper on black holes are…

  1. FACT. Bokeh alignment for Cherenkov telescopes

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Sebastian Achim [ETH Zurich (Switzerland); Buss, Jens [TU Dortmund (Germany)

    2016-07-01

    Imaging Atmospheric Cherenkov Telescopes (IACTs) need fast and large imaging optics to map the faint Cherenkov light emitted in cosmic ray air showers onto their image sensors. Segmented reflectors are inexpensive, lightweight and offer good image quality. However, alignment of the mirror facets remains a challenge. A good alignment is crucial in IACT observations to separate gamma rays from hadronic cosmic rays. We present a simple, yet extendable method, to align segmented reflectors using their Bokeh. Bokeh alignment does not need a star or good weather nights but can be done anytime, even during the day. Bokeh alignment optimizes the facet orientations by comparing the segmented reflector's Bokeh to a predefined template. The Bokeh is observed using the out of focus image of a nearby point like light source in a distance of about ten times the focal lengths. We introduce Bokeh alignment on segmented reflectors and present its use on the First Geiger-mode Avalanche Cherenkov Telescope (FACT) on Canary Island La Palma, as well as on the Cherenkov Telescope Array (CTA) Medium Size Telescope (MST) prototype in Berlin Adlershof.

  2. The Giant Magellan Telescope adaptive optics program

    Science.gov (United States)

    Bouchez, Antonin H.; Acton, D. Scott; Agapito, Guido; Arcidiacono, Carmelo; Bennet, Francis; Biliotti, Valdemaro; Bonaglia, Marco; Briguglio, Runa; Brusa-Zappellini, Guido; Busoni, Lorenzo; Carbonaro, Luca; Codona, Johanan L.; Conan, Rodolphe; Connors, Thomas; Durney, Oliver; Espeland, Brady; Esposito, Simone; Fini, Luca; Gardhouse, Rusty; Gauron, Thomas M.; Hart, Michael; Hinz, Philip M.; Kanneganti, Srikrishna; Kibblewhite, Edward J.; Knox, Russell P.; McLeod, Brian A.; McMahon, Thomas; Montoya, Manny; Norton, Timothy J.; Ordway, Mark P.; d'Orgeville, Celine; Parcell, Simon; Piatrou, Piotr K.; Pinna, Enrico; Price, Ian; Puglisi, Alfio; Quiros-Pacheco, Fernando; Riccardi, Armando; Roll, John B.; Trancho, Gelys; Uhlendorf, Kristina; Vaitheeswaran, Vidhya; van Dam, Marcos A.; Weaver, David; Xompero, Marco

    2012-07-01

    The Giant Magellan Telescope adaptive optics system will be an integral part of the telescope, providing laser guide star generation, wavefront sensing, and wavefront correction to most of the currently envisioned instruments. The system will provide three observing modes: Natural Guidestar AO (NGSAO), Laser Tomography AO (LTAO), and Ground Layer AO (GLAO). Every AO observing mode will use the telescope’s segmented adaptive secondary mirror to deliver a corrected beam directly to the instruments. High-order wavefront sensing for the NGSAO and LTAO modes is provided by a set of wavefront sensors replicated for each instrument and fed by visible light reflected off the cryostat window. An infrared natural guidestar wavefront sensor with open-loop AO correction is also required to sense tip-tilt, focus, segment piston, and dynamic calibration errors in the LTAO mode. GLAO mode wavefront sensing is provided by laser guidestars over a ~5 arcminute field of view, and natural guidestars over wider fields. A laser guidestar facility will project 120 W of 589 nm laser light in 6 beacons from the periphery of the primary mirror. An off-axis phasing camera and primary and secondary mirror metrology systems will ensure that the telescope optics remain phased. We describe the system requirements, overall architecture, and innovative solutions found to the challenges presented by high-order AO on a segmented extremely large telescope. Further details may be found in specific papers on each of the observing modes and major subsystems.

  3. Fusion of Telescopic and Doppler Radar Data

    Science.gov (United States)

    Navara, M.; Matousek, M.; Drbohlav, O.

    2014-09-01

    We study the possibilities of observations of satellites at circular LEO orbits simultaneously by a telescope and a bistatic continuous-wave Doppler radar. Telescopic images allow for trajectory determination except for its distance (and hence height). Assuming a circular orbit, the height can be computed from the angular speed, but this is often impossible for LEO objects which do not remain in the field of view during the whole exposure time. To restore the missing information, we use Doppler radar data from a radio astronomy network, originally designed for detection of meteors. Using simulated perturbations of real radar data we studied their influence on the estimates of (i) permanent parameters of trajectory (orbital elements), (ii) instantaneous parameters of trajectory, (iii) distance and height estimates if the other parameters are given by the telescopic data. We derived recommendations for the optimal positions of the transmitter and receivers leading to the best resolution. We also discuss possible ways of improvement of this technique. Fusion results are shown on a suite of several matched radar and telescopic satellite fly-over data.

  4. New Solar System Researches expected by a New Telescope Project at Mt. Haleakala, Hawaii

    Science.gov (United States)

    Kagitani, Masato; Okano, S.; Kasaba, Y.; Kuhn, J.; Berdyugina, S.

    2009-09-01

    We Tohoku University starts the project for the new ground-based telescope dedicated to planets and exoplanets, in collaboration with the Institute for Astronomy of University of Hawaii(IfA/UH) and ETH Zurich. The summit of Mt. Haleakala in Maui, Hawaii is one of the best sites with clear skies, good seeing, and low humidity conditions as well as good accessibility despite its high altitude (elv. 3,000m). Haleakala High Altitude Observatory is operated by IfA/UH, and we have been making observation of planets there since 2000. Currently, our observation facility consists of a 40cm telescope. We have been making observations of faint atmospheric and plasma features around bright planets, Io plasma torus, Mercury and Lunar sodium tail, and so on. Atmospheric escapes from Mars and Venus, the exoplanets close to mother stars are also possible future important topics. When we try to observe those faint emissions surrounding the bright objects, intense scattered light causes a serious problem. The new telescope shall avoid the diffraction due to a spider structure that holds a secondary mirror and to minimize the scattered light from mirror surfaces as far as possible. Such telescope with a wide dynamic range dedicated to planetary and exoplanetary sciences does not exist yet. The project, called PLANETS (Poralized Light from Atmospheres of Nearby Extra Terrestrial Planets), develops a new telescope (tentatively named as JHET; Japan Hawaii Europe Telescope) which consists of an off-axis primary mirror with a diameter of 1.8m, and Gregorian optics on an equatorial mount. State-of-art adaptive optics and masking technologies will also be adopted to eliminate the scattering light. This telescope will enables us to do spectro-polarimetric observations and faint plasma and atmospheres around the bright bodies. We will introduce the progress of our ground-based observations and the future plan involving the wide area of the international communities.

  5. On the prospects of cross-calibrating the Cherenkov Telescope Array with an airborne calibration platform

    Science.gov (United States)

    Brown, Anthony M.

    2018-01-01

    Recent advances in unmanned aerial vehicle (UAV) technology have made UAVs an attractive possibility as an airborne calibration platform for astronomical facilities. This is especially true for arrays of telescopes spread over a large area such as the Cherenkov Telescope Array (CTA). In this paper, the feasibility of using UAVs to calibrate CTA is investigated. Assuming a UAV at 1km altitude above CTA, operating on astronomically clear nights with stratified, low atmospheric dust content, appropriate thermal protection for the calibration light source and an onboard photodiode to monitor its absolute light intensity, inter-calibration of CTA's telescopes of the same size class is found to be achievable with a 6 - 8 % uncertainty. For cross-calibration of different telescope size classes, a systematic uncertainty of 8 - 10 % is found to be achievable. Importantly, equipping the UAV with a multi-wavelength calibration light source affords us the ability to monitor the wavelength-dependent degradation of CTA telescopes' optical system, allowing us to not only maintain this 6 - 10 % uncertainty after the first few years of telescope deployment, but also to accurately account for the effect of multi-wavelength degradation on the cross-calibration of CTA by other techniques, namely with images of air showers and local muons. A UAV-based system thus provides CTA with several independent and complementary methods of cross-calibrating the optical throughput of individual telescopes. Furthermore, housing environmental sensors on the UAV system allows us to not only minimise the systematic uncertainty associated with the atmospheric transmission of the calibration signal, it also allows us to map the dust content above CTA as well as monitor the temperature, humidity and pressure profiles of the first kilometre of atmosphere above CTA with each UAV flight.

  6. Effects of a telescopic intramedullary rod for treating patients with osteogenesis imperfecta of the femur

    Science.gov (United States)

    Rosemberg, D. L.; Goiano, E. O.; Akkari, M.; Santili, C.

    2018-01-01

    Abstract Purpose To introduce a new model of telescopic intramedullary rod (TIR), evaluate its effects on treating patients presenting with moderate and severe osteogenesis imperfecta (OI) and to compare the findings with those of other telescopic rods. Methods A total of 21 patients (nine girls and 12 boys; mean age at first operation, 6.6 years, 1.52 to 13.18) who underwent 52 femoral operations were monitored during a mean of 9.96 years (3.39 to 14.54). Patient characteristics, telescoping rod capability and its complications were examined. Results According to the Sillence classification, we investigated one patient with type I, nine with type III and 11 with type IV OI. Revision rates at up to five years (36%) were inferior to those found for the Fassier-Duval rod (46%). The main cause of revision was fracture (15 patients), followed by rod migration (nine), and infection (two). The rod exhibited higher telescopic capacity in boys than girls. Type III most commonly required an operation; the age group with the highest number of procedures was five to ten years. Male migration was the main cause of rod migration. Conclusion The TIR has a satisfactory cost-benefit ratio with less complication rates and low production costs. The TIR is a feasible alternative to the commonly used Fassier-Duval rod. Level of Evidence IV PMID:29456761

  7. Analysis of the optics of the 2.5-m telescope of the Sternberg Astronomical Institute

    Science.gov (United States)

    Potanin, S. A.; Gorbunov, I. A.; Dodin, A. V.; Savvin, A. D.; Safonov, B. S.; Shatsky, N. I.

    2017-08-01

    The results of alignment and acceptance tests of the optics system of the 2.5-m telescope installed at the Caucausus Mountain Observatory of the Sternberg Astronomical Institute in 2013-2015 are reported. The optical elements of the Ritchey-Chrétien system of the telescope were manufactured by REOSC (France). Measurements of aberrations were carried out using a specially manufactured Shack-Hartmann wavefront sensor. Adjustment of the load-distribution mechanisms of the primary mirror and automatic correction for bending of the structure have made it possible to achieve the target image quality at all operational positions of the telescope, corresponding to 80% of the energy being concentrated in a circle 0.3″ in diameter. Factory interferograms of the mirrors and methods for measuring their abberation using stellar images are presented.

  8. Performance of the Pixel Luminosity Telescope for Luminosity Measurement at CMS during Run 2

    CERN Document Server

    CMS Collaboration

    2017-01-01

    The Pixel Luminosity Telescope (PLT) is a dedicated system for luminosity measurement at the CMS experiment using silicon pixel sensors arranged into "telescopes", each consisting of three planes. It was installed during LS1 at the beginning of 2015 and has been providing online and offline luminosity measurements throughout Run 2. The online bunch-by-bunch luminosity measurement employs the "fast-or" capability of the pixel readout chip (PSI46) to identify events where a hit is registered in all three sensors in a telescope corresponding primarily to tracks originating from the interaction point. In addition, the full pixel information is read out at a lower rate, allowing for the calculation of corrections to the online luminosity from effects such as the miscounting of tracks not originating from the interaction point and detector efficiency. In this talk, we will present results from 2016 running and preliminary 2017 results, including commissioning and operational history, luminosity calibration using Va...

  9. Automatized Photometric Monitoring of Active Galactic Nuclei with the 46cm Telescope of the Wise Observatory

    Science.gov (United States)

    Pozo Nuñez, Francisco; Chelouche, Doron; Kaspi, Shai; Niv, Saar

    2017-09-01

    We present the first results of an ongoing variability monitoring program of active galactic nuclei (AGNs) using the 46 cm telescope of the Wise Observatory in Israel. The telescope has a field of view of 1.25^\\circ × 0.84^\\circ and is specially equipped with five narrowband filters at 4300, 5200, 5700, 6200, and 7000 Å to perform photometric reverberation mapping studies of the central engine of AGNs. The program aims to observe a sample of 27 AGNs (V time delay measurements obtained in previous works. We describe the autonomous operation of the telescope together with the fully automatic pipeline used to achieve high-performance unassisted observations, data reduction, and light curves extraction using different photometric methods. The science verification data presented here demonstrates the performance of the monitoring program in particular for efficiently photometric reverberation mapping of AGNs with additional capabilities to carry out complementary studies of other transient and variable phenomena such as variable stars studies.

  10. Performance of the Pixel Luminosity Telescope for Luminosity Measurement at CMS during Run2

    CERN Document Server

    Lujan, Paul Joseph

    2017-01-01

    The Pixel Luminosity Telescope (PLT) is a dedicated system for luminosity measurement at the CMS experiment using silicon pixel sensors arranged into telescopes, each consisting of three sensor planes. It was installed in CMS at the beginning of 2015 and has been providing online and offline luminosity measurements throughout Run 2 of the LHC. The online bunch-by-bunch luminosity measurement employs the fast-or capability of the pixel readout chip to identify events where a hit is registered in all three sensors in a telescope, corresponding primarily to tracks originating from the interaction point. In addition, the full pixel information is read out at a lower rate, allowing for the calculation of corrections to the online luminosity from effects such as the miscounting of tracks not originating from the interaction point and detector efficiency. This paper presents results from the 2016 running of the PLT, including commissioning and operational history, luminosity calibration using Van der Meer scans, and...

  11. Techniques and results for the calibration of the MST prototype for the Cherenkov telescope array

    Science.gov (United States)

    Oakes, L.; Garczarczyk, M.; Kaphle, S.; Mayer, M.; Schlenstedt, S.; Schwanke, U.

    2017-01-01

    The next generation instrument for ground-based gamma-ray astronomy will be the Cherenkov Telescope Array (CTA), consisting of approximately 100 telescopes in three sizes, built on two sites with one each in the Northern and Southern Hemi-spheres. Up to 40 of these will be Medium Size Telescopes (MSTs) which will dominate sensitivity in the core energy range. Since 2012, a full size mechanical prototype for the modified 12 m Davies-Cotton design MST has been in operation in Berlin. This document describes the techniques which have been implemented to calibrate and optimise the mechanical and optical performance of the prototype, and gives the results of over three years of observations and measurements. Pointing calibration techniques will be discussed, along with the development of a bending model, and calibration of the CCD cameras used for pointing measurements. Additionally alignment of mirror segments using the Bokeh method is shown.

  12. Gravitational Redshift Experiment with the Space Radio Telescope RadioAstron

    CERN Document Server

    Litvinov, D; Belousov, K; Bietenholz, M; Biriukov, A; Fionov, A; Gusev, A; Kauts, V; Kovalenko, A; Kulagin, V; Poraiko, N; Rudenko, V

    2015-01-01

    A unique test of general relativity is possible with the space radio telescope RadioAstron. The ultra-stable on-board hydrogen maser frequency standard and the highly eccentric orbit make RadioAstron an ideal instrument for probing the gravitational redshift effect. Large gravitational potential variation, occurring on the time scale of $\\sim$24 hr, causes large variation of the on-board H-maser clock rate, which can be detected via comparison with frequency standards installed at various ground radio astronomical observatories. The experiment requires specific on-board hardware operating modes and support from ground radio telescopes capable of tracking the spacecraft continuously and equipped with 8.4 or 15 GHz receivers. Our preliminary estimates show that $\\sim$30 hr of the space radio telescope's observational time are required to reach $\\sim 2\\times10^{-5}$ accuracy in the test, which would constitute a factor of 10 improvement over the currently achieved best result.

  13. Camera Development for the Cherenkov Telescope Array

    Science.gov (United States)

    Moncada, Roberto Jose

    2017-01-01

    With the Cherenkov Telescope Array (CTA), the very-high-energy gamma-ray universe, between 30 GeV and 300 TeV, will be probed at an unprecedented resolution, allowing deeper studies of known gamma-ray emitters and the possible discovery of new ones. This exciting project could also confirm the particle nature of dark matter by looking for the gamma rays produced by self-annihilating weakly interacting massive particles (WIMPs). The telescopes will use the imaging atmospheric Cherenkov technique (IACT) to record Cherenkov photons that are produced by the gamma-ray induced extensive air shower. One telescope design features dual-mirror Schwarzschild-Couder (SC) optics that allows the light to be finely focused on the high-resolution silicon photomultipliers of the camera modules starting from a 9.5-meter primary mirror. Each camera module will consist of a focal plane module and front-end electronics, and will have four TeV Array Readout with GSa/s Sampling and Event Trigger (TARGET) chips, giving them 64 parallel input channels. The TARGET chip has a self-trigger functionality for readout that can be used in higher logic across camera modules as well as across individual telescopes, which will each have 177 camera modules. There will be two sites, one in the northern and the other in the southern hemisphere, for full sky coverage, each spanning at least one square kilometer. A prototype SC telescope is currently under construction at the Fred Lawrence Whipple Observatory in Arizona. This work was supported by the National Science Foundation's REU program through NSF award AST-1560016.

  14. The Configurable Aperture Space Telescope (CAST)

    Science.gov (United States)

    Ennico, Kimberly; Bendek, Eduardo A.; Lynch, Dana H.; Vassigh, Kenny K.; Young, Zion

    2016-07-01

    The Configurable Aperture Space Telescope, CAST, is a concept that provides access to a UV/visible-infrared wavelength sub-arcsecond imaging platform from space, something that will be in high demand after the retirement of the astronomy workhorse, the 2.4 meter diameter Hubble Space Telescope. CAST allows building large aperture telescopes based on small, compatible and low-cost segments mounted on autonomous cube-sized satellites. The concept merges existing technology (segmented telescope architecture) with emerging technology (smartly interconnected modular spacecraft, active optics, deployable structures). Requiring identical mirror segments, CAST's optical design is a spherical primary and secondary mirror telescope with modular multi-mirror correctors placed at the system focal plane. The design enables wide fields of view, up to as much as three degrees, while maintaining aperture growth and image performance requirements. We present a point design for the CAST concept based on a 0.6 meter diameter (3 x 3 segments) growing to a 2.6 meter diameter (13 x 13 segments) primary, with a fixed Rp=13,000 and Rs=8,750 mm curvature, f/22.4 and f/5.6, respectively. Its diffraction limited design uses a two arcminute field of view corrector with a 7.4 arcsec/mm platescale, and can support a range of platescales as fine as 0.01 arcsec/mm. Our paper summarizes CAST, presents a strawman optical design and requirements for the underlying modular spacecraft, highlights design flexibilities, and illustrates applications enabled by this new method in building space observatories.

  15. Nuclear Spectroscopic Telescope Array (NuSTAR) Mission

    Science.gov (United States)

    Kim, Yunjin; Willis, Jason; Dodd, Suzanne; Harrison, Fiona; Forster, Karl; Craig, William; Bester, Manfred; Oberg, David

    2013-01-01

    The Nuclear Spectroscopic Telescope Array (NuSTAR) is a National Aeronautics and Space Administration (NASA) Small Explorer mission that carried the first focusing hard X-ray (6-79 keV) telescope into orbit. It was launched on a Pegasus rocket into a low-inclination Earth orbit on June 13, 2012, from Reagan Test Site, Kwajalein Atoll. NuSTAR will carry out a two-year primary science mission. The NuSTAR observatory is composed of the X-ray instrument and the spacecraft. The NuSTAR spacecraft is three-axis stabilized with a single articulating solar array based on Orbital Sciences Corporation's LEOStar-2 design. The NuSTAR science instrument consists of two co-aligned grazing incidence optics focusing on to two shielded solid state CdZnTe pixel detectors. The instrument was launched in a compact, stowed configuration, and after launch, a 10-meter mast was deployed to achieve a focal length of 10.15 m. The NuSTAR instrument provides sub-arcminute imaging with excellent spectral resolution over a 12-arcminute field of view. The NuSTAR observatory will be operated out of the Mission Operations Center (MOC) at UC Berkeley. Most science targets will be viewed for a week or more. The science data will be transferred from the UC Berkeley MOC to a Science Operations Center (SOC) located at the California Institute of Technology (Caltech). In this paper, we will describe the mission architecture, the technical challenges during the development phase, and the post-launch activities.

  16. On sky testing and preliminary sensor alignment for the SOFIA Telescope

    Science.gov (United States)

    Harms, Franziska; Waddell, Patrick; Suess, Martin; Roeser, Hans-Peter

    2006-06-01

    The telescope pointing control of the Stratospheric Observatory for Infrared Astronomy (SOFIA) is achieved during science observations by an array of sensors including three imagers, gyroscopes and accelerometers. In addition, throughout alignment and calibration of the telescope assembly, the High-speed Imaging Photometer for Occultation (HIPO) is used as a reference instrument. A summary of the telescope pointing control concept is given and how HIPO is used to calibrate the telescope reference systems on the sky. A method is introduced using simple maneuvers to perform initial alignment of HIPO, the imagers and the gyroscopes by means of single star observations. During the first on sky testing of the SOFIA telescope, these maneuvers were carried out and the alignment could be improved iteratively. The corresponding alignment accuracies are identified considering repeated measurements, environmental and sensor noise. Inertial and non-inertial observations, as well as measurements over the entire operational elevation range provide additional alignment and sensor performance information. Finally, an overview is presented for future improvements in alignment.

  17. Hubble Space Telescope: Optical telescope assembly handbook. Version 1.0

    Science.gov (United States)

    Burrows, Chris

    1990-01-01

    The Hubble Space Telescope is described along with how its design affects the images produced at the Science Instruments. An overview is presented of the hardware. Details are presented of the focal plane, throughput of the telescope, and the point spread function (image of an unresolved point source). Some detailed simulations are available of this, which might be useful to observers in planning their observations and in reducing their data.

  18. Upgraded cameras for the HESS imaging atmospheric Cherenkov telescopes

    Science.gov (United States)

    Giavitto, Gianluca; Ashton, Terry; Balzer, Arnim; Berge, David; Brun, Francois; Chaminade, Thomas; Delagnes, Eric; Fontaine, Gérard; Füßling, Matthias; Giebels, Berrie; Glicenstein, Jean-François; Gräber, Tobias; Hinton, James; Jahnke, Albert; Klepser, Stefan; Kossatz, Marko; Kretzschmann, Axel; Lefranc, Valentin; Leich, Holger; Lüdecke, Hartmut; Lypova, Iryna; Manigot, Pascal; Marandon, Vincent; Moulin, Emmanuel; de Naurois, Mathieu; Nayman, Patrick; Penno, Marek; Ross, Duncan; Salek, David; Schade, Markus; Schwab, Thomas; Simoni, Rachel; Stegmann, Christian; Steppa, Constantin; Thornhill, Julian; Toussnel, François

    2016-08-01

    The High Energy Stereoscopic System (H.E.S.S.) is an array of five imaging atmospheric Cherenkov telescopes, sensitive to cosmic gamma rays of energies between 30 GeV and several tens of TeV. Four of them started operations in 2003 and their photomultiplier tube (PMT) cameras are currently undergoing a major upgrade, with the goals of improving the overall performance of the array and reducing the failure rate of the ageing systems. With the exception of the 960 PMTs, all components inside the camera have been replaced: these include the readout and trigger electronics, the power, ventilation and pneumatic systems and the control and data acquisition software. New designs and technical solutions have been introduced: the readout makes use of the NECTAr analog memory chip, which samples and stores the PMT signals and was developed for the Cherenkov Telescope Array (CTA). The control of all hardware subsystems is carried out by an FPGA coupled to an embedded ARM computer, a modular design which has proven to be very fast and reliable. The new camera software is based on modern C++ libraries such as Apache Thrift, ØMQ and Protocol buffers, offering very good performance, robustness, flexibility and ease of development. The first camera was upgraded in 2015, the other three cameras are foreseen to follow in fall 2016. We describe the design, the performance, the results of the tests and the lessons learned from the first upgraded H.E.S.S. camera.

  19. Using a laser tracker for active alignment on the Large Binocular Telescope

    Science.gov (United States)

    Rakich, A.

    2012-09-01

    The Large Binocular Telescope (LBT) currently achieves collimation using a combination of collimation models and closed-loop active correction schemes. Shack Hartmann wavefront sensors with off-axis guide stars are used for Gregorian modes, and a closed-loop correction scheme is used for the prime-focus cameras. While in general this combination serves to produce alignment residuals well below a good seeing limit within a few minutes of obtaining a given target field, the uniquely asymmetrical structure of the LBT is prone to producing large deflections of the telescope optics when the ambient temperature is changing unusually rapidly. These deflections are difficult to model satisfactorily, and are an ongoing source of inefficiency in telescope operations. Furthermore, none of the current approaches to telescope collimation are particularly "piston aware"; a situation that needs to be improved on now that the LBT is commencing operations with the first of its beam combining instruments, LBTI. The laser tracker is a metrology instrument capable of automatically measuring optical element positions with better than 100 micron precision within a spherical volume of 30 m radius centered on the tracker head. With the ability to directly measure optics into position to this accuracy built into the Telescope Control System (TCS), the LBT would always be starting observations from a point of near-collimation, the component telescopes would be co-pointed, and the OPD would be well within the capture range of the beam combining instrument's internal phasing systems. This paper describes first results from engineering investigations into using the laser tracker to automatically align the optics on the LBT.

  20. New electronics for the Cherenkov Telescope Array (NECTAr)

    Energy Technology Data Exchange (ETDEWEB)

    Naumann, C.L., E-mail: christopher.naumann@lpnhe.in2p3.fr [LPNHE, IN2P3/CNRS Universite Paris VI and Universite Paris VII and IN2P3/CNRS, Paris (France); Delagnes, E. [IRFU, CEA/DSM, Saclay, Gif-sur-Yvette (France); Bolmont, J.; Corona, P. [LPNHE, IN2P3/CNRS Universite Paris VI and Universite Paris VII and IN2P3/CNRS, Paris (France); Dzahini, D. [LPSC, Universite Joseph Fourier, INPG and IN2P3/CNRS, Grenoble (France); Feinstein, F. [LUPM, Universite Montpellier II and IN2P3/CNRS, Montpellier (France); Gascon, D. [ICC-UB, Universitat Barcelona (Spain); Glicenstein, J.-F.; Guilloux, F. [IRFU, CEA/DSM, Saclay, Gif-sur-Yvette (France); Nayman, P. [LPNHE, IN2P3/CNRS Universite Paris VI and Universite Paris VII and IN2P3/CNRS, Paris (France); Rarbi, F. [LPSC, Universite Joseph Fourier, INPG and IN2P3/CNRS, Grenoble (France); Sanuy, A. [ICC-UB, Universitat Barcelona (Spain); Tavernet, J.-P.; Toussenel, F.; Vincent, P. [LPNHE, IN2P3/CNRS Universite Paris VI and Universite Paris VII and IN2P3/CNRS, Paris (France); Vorobiov, S. [LUPM, Universite Montpellier II and IN2P3/CNRS, Montpellier (France); DESY Zeuthen, Platanenallee 6, 15738 Zeuthen (Germany)

    2012-12-11

    The international CTA consortium has recently entered into its preparatory phase towards the construction of the next-generation Cherenkov Telescope Array CTA. This experiment will be a successor, and based on the return of experience from the three major current-generation arrays H.E.S.S., MAGIC and VERITAS, and aims to significantly improve upon the sensitivity as well as the energy range of its highly successful predecessors. Construction is planned to begin by 2013, and when finished, CTA will be able to explore the highest-energy gamma ray sky in unprecedented detail. To achieve this increase in sensitivity and energy range, CTA will employ the order of 100 telescopes of three different sizes on two sites, with around 1000-4000 channels per camera, depending on the telescope size. To equip and reliably operate the order of 100000 channels of photodetectors (compared to 6000 of the H.E.S.S. array), a new kind of flexible and powerful yet inexpensive front-end hardware will be required. One possible solution is pursued by the NECTAr (New Electronics for the Cherenkov Telescope Array) project. Its main feature is the integration of as much as possible of the front-end electronics (amplifiers, fast analogue samplers, memory and ADCs) into a single ASIC, which will allow very fast readout performances while significantly reducing the cost and the power consumption per channel. Also included is a low-cost FPGA for digital treatment and online data processing, as well as an Ethernet connection. Other priorities of NECTAr are the modularity of the system, a high degree of flexibility in the trigger system as well as the possibility of flexible readout modes to optimise the signal-to-noise ratio while at the same time allowing a significant reduction of data rates, both of which could improve the sensitivity of CTA compared to current detection systems. This paper gives an overview over the development work for the Nectar system, with particular focus on its main

  1. NASA 3D Models: James Webb Space Telescope

    Data.gov (United States)

    National Aeronautics and Space Administration — The James Webb Space Telescope (JWST) will be a large infrared telescope with a 6.5-meter primary mirror. The project is working to a 2018 launch date. The JWST will...

  2. The Origins Space Telescope — A NASA Decadal Mission Study

    Science.gov (United States)

    Meixner, M.; Cooray, A.; Leisawitz, D.; Staguhn, J.; Origins Space Telescope STDT

    2017-11-01

    The Origins Space Telescope will discover or characterize exoplanets, the most distant galaxies, nearby galaxies and the Milky Way, and the outer reaches of our solar system. This talk will present the Origins Space Telescope Mission Concept 1.

  3. Scientific Performance Analysis of the SYZ Telescope Design versus the RC Telescope Design

    Science.gov (United States)

    Ma, Donglin; Cai, Zheng

    2018-02-01

    Recently, Su et al. propose an innovative design, referred as the “SYZ” design, for China’s new project of a 12 m optical-infrared telescope. The SYZ telescope design consists of three aspheric mirrors with non-zero power, including a relay mirror below the primary mirror. SYZ design yields a good imaging quality and has a relatively flat field curvature at Nasmyth focus. To evaluate the science-compatibility of this three-mirror telescope, in this paper, we thoroughly compare the performance of SYZ design with that of Ritchey–Chrétien (RC) design, a conventional two-mirror telescope design. Further, we propose the Observing Information Throughput (OIT) as a metric for quantitatively evaluating the telescopes’ science performance. We find that although a SYZ telescope yields a superb imaging quality over a large field of view, a two-mirror (RC) telescope design holds a higher overall throughput, a better diffraction-limited imaging quality in the central field of view (FOV < 5‧) which is better for the performance of extreme Adaptive Optics (AO), and a generally better scientific performance with a higher OIT value. D. Ma & Z. Cai contributed equally to this paper.

  4. South African Student Constructed Indlebe Radio Telescope

    Science.gov (United States)

    McGruder, Charles H.; MacPherson, Stuart; Janse Van Vuuren, Gary Peter

    2017-01-01

    The Indlebe Radio Telescope (IRT) is a small transit telescope with a 5 m diameter parabolic reflector working at 21 cm. It was completely constructed by South African (SA) students from the Durban University of Technology (DUT), where it is located. First light occurred on 28 July 2008, when the galactic center, Sagittarius A, was detected. As a contribution to the International Year of Astronomy in 2009, staff members in the Department of Electronic Engineering at DUT in 2006 decided to have their students create a fully functional radio telescope by 2009. The specific project aims are to provide a visible project that could generate interest in science and technology in high school students and to provide a real world system for research in radio astronomy in general and an optimization of low noise radio frequency receiver systems in particular. These aims must be understood in terms of the SA’s government interests in radio astronomy. SA is a partner in the Square Kilometer Array (SKA) project, has constructed the Karoo Array Telescope (KAT) and MeerKat, which is the largest and most sensitive radio telescope in the southern hemisphere. SA and its partners in Africa are investing in the construction of the African Very Long Baseline Interferometry Network (AVN), an array of radio telescopes throughout Africa as an extension of the existing global Very Long Baseline Interferometry Network (VLBI). These projects will allow SA to make significant contributions to astronomy and enable astronomy to contribute to the scientific education and development goals of the country. The IRT sees on a daily basis the transit of Sag A. The transit time is influenced by precession, nutation, polar motion, aberration, celestial pole offset, proper motion, length of the terrestrial day and variable ionospheric refraction. Of these eight factors six are either predictable or measureable. To date neither celestial pole offset nor variable ionospheric refraction are predicable

  5. Deep Sky Diving with the ESO New Technology Telescope

    Science.gov (United States)

    1998-01-01

    Preparations for future cosmological observations with the VLT Within a few months, the first 8.2-meter Unit Telescope of the ESO Very Large Telescope (VLT) array will open its eye towards the sky above the Atacama desert. As documented by recent Press Photos from ESO, the construction work at the Paranal VLT Observatory is proceeding rapidly. Virtually all of the telescope components, including the giant Zerodur mirror (cf. ESO PR Photos 35a-l/97 ), are now on the mountain. While the integration of the telescope and its many optical, mechanical and electronic components continues, astronomers in the ESO member countries and at ESO are now busy defining the observing programmes that will be carried out with the new telescope, soon after it enters into operation. In this context, new and exciting observations have recently been obtained with the 3.5-m New Technology Telescope at the ESO La Silla Observatory, 600 km to the south of Paranal. How to record the faintest and most remote astronomical objects With its very large mirror surface (and correspondingly great light collecting power), as well as an unsurpassed optical quality, the VLT will be able to look exceedingly far out into the Universe, well beyond current horizons. The best technique to record the faintest possible light and thus the most remote celestial objects, is to combine large numbers of exposures of the same field with slightly different telescope pointing. This increases the total number of photons recorded and by imaging the stars and galaxies on different areas (pixels) of the detector, the signal-to-noise ratio and hence the visibility of the faintest objects is improved. The famous Hubble Deep Field Images were obtained in this way by combining over 300 single exposures and they show myriads of faint galaxies in the distant realms of the Universe. The NTT as test bench for the VLT ESO is in the fortunate situation of possessing a `prototype' model of the Very Large Telescope, the 3.5-m New

  6. Development of a Low Cost Spectrometer for the Small Radio Telescope (SRT), Very Small Radio Telescope (VSRT), and Ozone spectrometer

    Science.gov (United States)

    Higginson-Rollins, Marc; Rogers, A. E.

    2014-01-01

    Several instruments used for education, outreach and scientific investigations could benefit from a low cost spectrometer. These include the Small Radio Telescope known as the "SRT", a very small radio telescope known as the "VSRT", and an 11 GHz Ozone spectrometer. The SRT is used to observe the Sun and the 21-cm hydrogen line. The SRTs, which until recently were available commercially, are still in operation at many universities and are used for student projects including measuring the Galactic rotation curve of our Galaxy. These instruments, which were initially primarily used to help teach students how to analyze scientific data, are now used for scientific investigations that have resulted in publications in science journals. Recently a low cost USB "dongle" for digital TV has become available. It has been adapted for use as a software defined radio by amateur radio groups. Linux-based software was developed to adapt the device to form a low cost digital spectrometer for the SRT by integrating open source code into the existing C code written for the SRT. Some challenges faced when trying to integrate the USB TV dongle into the SRT system and software will be discussed. To test the effectiveness of the USB TV Dongle based SRT several astronomical observations were made and compared to the older SRT system. These observations show promise for the device replacing older SRT systems at a fraction of the cost and effort and as a possible replacement for the VSRT and Ozone spectrometer.

  7. Devasthal Fast Optical Telescope Observations of Wolf–Rayet Dwarf ...

    Indian Academy of Sciences (India)

    2016-01-27

    Jan 27, 2016 ... The Devasthal Fast Optical Telescope (DFOT) is a 1.3 meter aperture optical telescope, recently installed at Devasthal, Nainital. We present here the first results using an H filter with this telescope on a Wolf–Rayet dwarf galaxy Mrk 996. The instrumental response and the H sensitivity obtained with the ...

  8. Compact forceps manipulator with a spherical-coordinate linear and circular telescopic rail mechanism for endoscopic surgery.

    Science.gov (United States)

    Kawai, Toshikazu; Hayashi, Hiroyuki; Nishizawa, Yuji; Nishikawa, Atsushi; Nakamura, Ryoichi; Kawahira, Hiroshi; Ito, Masaaki; Nakamura, Tatsuo

    2017-08-01

    By integrating locally operated small surgical robots in a sterilized area, a surgeon can perform safe and accurate robotically assisted laparoscopic surgery. At present, there is no locally operated compact forceps robot that can operate within a small space while providing a wide working area on the abdominal wall. In the present study, a new spherical-coordinate manipulator with a linear telescopic rail and two circular telescopic rails that can act as a third arm for the surgeon has been developed. A compact locally operated detachable end-effector manipulator (LODEM) was developed. This manipulator uses circular telescopic rails with linkage mechanisms for the yaw and pitch axes, and a linear telescopic rail for the insertion/extraction axis is attached to forceps. The dimensions of the manipulator are [Formula: see text] when contracted and [Formula: see text] when expanded. The positional accuracy, mechanical deflection, and backlash of the prototype were evaluated while performing simulated in vivo laparoscopic surgery. The positional accuracy, deflection, and backlash of the telescopic rail mechanism were 2.1, 1.8, and 5.1 mm, respectively. The manipulator could successfully handle the target and maintain stability, while the arms of the endoscope specialist were free from collisions with the manipulator during an in vivo laparoscopic surgery. A compact LODEM was designed to facilitate minimally invasive, robotically assisted laparoscopic surgery by a doctor working near the patient. This device could be used for such applications.

  9. Searching Hubble Space Telescope Archives for Solar System Observations and Planned Improvements for James Webb Space Telescope

    Science.gov (United States)

    Gosmeyer, C. M.; Brasseur, C.; Fleming, S.; Mutchler, M.

    2017-06-01

    We present tips and tools for searching Hubble Space Telescope archives for solar system observations. Additionally, we provide an overview of planned archive improvements for James Webb Space Telescope.

  10. Space-compatible strain gauges as an integration aid for the James Webb Space Telescope Mid-Infrared Instrument

    DEFF Research Database (Denmark)

    Samara-Ratna, Piyal; Sykes, Jon; Bicknell, Chris

    2015-01-01

    in operation. The Mid-Infrared Instrument is one of four instruments to be used on the James Webb Space Telescope which is due for launch in 2018. This telescope will be successor to the Hubble Space Telescope and is the largest space-based astronomy project ever to be conceived. Critical to operation......Space instruments are designed to be highly optimised, mass efficient hardware required to operate in extreme environments. Building and testing is extremely costly, and damage that appears to have no impact on performance at normal ambient conditions can have disastrous implications when...... to protect the structure from damage. Compatible with space flight requirements, the gauges have been used in both ambient and cryogenic environments and were successfully used to support various tasks including integration to the spacecraft. The article also discusses limitations to using the strain gauge...

  11. James Webb Space Telescope: The First Light Machine

    Science.gov (United States)

    Stahl, H. Philip

    2014-01-01

    NASA James Webb Space Telescope (JWST) will search for the first luminous objects of the Universe to help answer fundamental questions about how the Universe came to look like it does today. At 6.5 meters in diameter, JWST will be the world's largest space telescope. Its architecture, e.g. aperture, wavelength range and operating temperature, is driven by JWST's science objectives. Introduction: Scheduled to start its 5 year mission after 2018, JWST will study the origin and evolution of galaxies, stars and planetary systems. Its science mission is to: Identify the first bright objects that formed in the early Universe, and follow the ionization history. Determine how galaxies form. Determine how galaxies and dark matter, including gas, stars, metals, overall morphology and active nuclei evolved to the present day. Observe the birth and early development of stars and the formation of planets. And, study the physical and chemical properties of solar systems for the building blocks of Life. Principle: To accomplish the JWST science objectives requires a larger aperture infrared cryogenic space telescope. A large aperture is required because the objects are very faint. The infrared spectral range is required because the objects are so far away that their ultraviolet and visible wavelength spectral lines are red-shifted into the infrared. Because the telescope is infrared, it needs to be cryogenic. And, because of the telescope is infrared, it must operate above the Earth's atmosphere, i.e. in space. JWST is probably the single most complicated mission that humanity has attempted. It is certainly the most difficult optical fabrication and testing challenge of our generation. The JWST 6.5 m diameter primary mirror is nearly a parabola with a conic constant of -0.9967 and radius of curvature at 30K of 15.880 m. The primary mirror is divided into 18 segments with 3 different prescriptions; each with its own off-axis distance and aspheric departure. The radius of curvature

  12. A 4-m evolvable space telescope configured for NASA's HabEx Mission: the initial stage of LUVOIR

    Science.gov (United States)

    Lillie, Charles F.; MacEwen, Howard A.; Polidan, Ronald S.; Breckinridge, James B.

    2017-09-01

    Previous papers have described our concept for a large telescope that would be assembled in space in several stages (in different configurations) over a period of fifteen to 20 years. Spreading the telescope development, launch and operations cost over 20 years would minimize the impact on NASA's annual budget and drastically shorten the time between program start and "first light" for this space observatory. The first Stage of this Evolvable Space Telescope (EST) would consist of an instrument module located at the prime focus of three 4-meter hexagonal mirrors arranged in a semi-circle to form one-half of a 12-m segmented mirror. After several years three additional 4-m mirrors would be added to create a 12-m filled aperture. Later, twelve more 4-m mirrors will be added to this Stage 2 telescope to create a 20-m filled aperture space telescope. At each stage the telescope would have an unparalleled capability for UVOIR observations, and the results of these observations will guide the evolution of the telescope and its instruments. In this paper we describe our design concept for an initial configuration of our Evolvable Space Telescope that can meet the requirements of the 4-m version of the HabEx spacecraft currently under consideration by NASA's Habitable Exoplanet Science and Technology Definition Team. This "Stage Zero" configuration will have only one 4-m mirror segment with the same 30-m focal length and a prime focus coronagraph with normal incidence optics to minimize polarization effects. After assembly and checkout in cis-lunar space, the telescope would transfer to a Sun-Earth L2 halo orbit and obtain high sensitivity, high resolution, high contrast UVOIR observations that address the scientific objectives of the Habitable-Exoplanet Imaging Missions.

  13. Exploring the Universe with the Worldwide Telescope

    Science.gov (United States)

    Fay, J. E.

    2014-12-01

    Microsoft Research WorldWide Telescope is a software platform for exploring the universe. Whether you are a researcher, student or just a casual explorer WorldWide Telescope uses cutting edge technology to take you anywhere in the universe and visualize data collected by science programs from across the globe, including NASA great observatories and planetary probes. WWT leverages technologies such as Virtual reality headsets, multi-channel full dome projection and HTML5/WebGL to bring the WWT experience to any device and any scale. We will discuss how to use WWT to browse previously curated data, as well as how to process and visualize your own data, using examples from NASA Mars missions.

  14. A rigorous algorithm for telescope pointing

    Science.gov (United States)

    Wallace, Patrick T.

    2002-12-01

    A typical modern telescope control system points by first calculating the direction of the target in nominal mount coordinates and then applying small corrections to the demanded mount angles. The pointing refers to the rotation axis of the instrument mount, and rotator demands are calculated via parallactic angle. This simple approach works well enough when the corrections are small and the accuracy objectives are modest. However, a more rigorous approach can pay off, in the form of improved pointing, more accurate guide probe predictions, reduced residual field rotation and reliable world coordinate system information even when the detector is off-axis. In this paper I propose a rigorous vector/matrix algorithm for generating pointing predictions on an imperfect telescope, with support for autoguiding, field stabilization and world coordinate systems even in difficult cases such as Nasmyth and coude.

  15. A 25 m Live Optics Telescope

    DEFF Research Database (Denmark)

    Ardeberg, Arne; Andersen, Torben; Owner-Petersen, Mette

    1996-01-01

    A 25 m four mirror live optics telescope is studied. M1 is spherical with 141 segments and f/0.96. M1 is reimaged onto M4 also with 141 segments. Image FWHM is 20 arc min. A horseshoe solution with a simple azimuth platform is applied. M1 segments are supported by a fine...... meniscus form truss structure, tied to the horseshoe by a coarser mesh. A FEM with 10^4 dof was developed and applied. Live optics control M1 and M4 segments (the latter with potential high bandwidth). Correction signals in tilt, coma and defocus are traced. A correlation tracker and a lase guide star.......Key words: Very large telescopes - live optics - image quality - wind buffeting - end-to-end simulation model....

  16. Computerization of a telescope at secondary education

    Science.gov (United States)

    García Santiago, A.; Martos Jumillas, J.

    2017-03-01

    The work we are presenting in this paper is the computerization of a refractor telescope on an EQ3 type equatorial mount through Arduino. The control of the mount is done via three different interfaces: Stellarium, an Android interface for mobile phones and a second interface for PC made with Processing. The aforementioned work was done by the authors with a double purpose: presenting the interest in astronomy in the Mathematics department, and the development of applications within the subject of Technology in 4th ESO. So, it is a collaborative project between both departments. Except for the telescope and the mount, all the resources we have used can be found in any high school: free software (Guadalinex v9), App Inventor and Processing.The project was carried out under the principle of reducing all possible costs given the economic possibilities of the institution.

  17. San Pedro Martir Telescope: Mexican design endeavor

    Science.gov (United States)

    Toledo-Ramirez, Gengis K.; Bringas-Rico, Vicente; Reyes, Noe; Uribe, Jorge; Lopez, Aldo; Tovar, Carlos; Caballero, Xochitl; Del-Llano, Luis; Martinez, Cesar; Macias, Eduardo; Lee, William; Carramiñana, Alberto; Richer, Michael; González, Jesús; Sanchez, Beatriz; Lucero, Diana; Manuel, Rogelio; Segura, Jose; Rubio, Saul; Gonzalez, German; Hernandez, Obed; García, Mary; Lazaro, Jose; Rosales-Ortega, Fabian; Herrera, Joel; Sierra, Gerardo; Serrano, Hazael

    2016-08-01

    The Telescopio San Pedro Martir (TSPM) is a new ground-based optical telescope project, with a 6.5 meters honeycomb primary mirror, to be built in the Observatorio Astronomico Nacional on the Sierra San Pedro Martir (OAN-SPM) located in Baja California, Mexico. The OAN-SPM has an altitude of 2830 meters above sea level; it is among the best location for astronomical observation in the world. It is located 1830 m higher than the atmospheric inversion layer with 70% of photometric nights, 80% of spectroscopic nights and a sky brightness up to 22 mag/arcsec2. The TSPM will be suitable for general science projects intended to improve the knowledge of the universe established on the Official Mexican Program for Science, Technology and Innovation 2014-2018. The telescope efforts are headed by two Mexican institutions in name of the Mexican astronomical community: the Universidad Nacional Autonoma de Mexico and the Instituto Nacional de Astrofisica, Optica y Electronica. The telescope has been financially supported mainly by the Consejo Nacional de Ciencia y Tecnologia (CONACYT). It is under development by Mexican scientists and engineers from the Center for Engineering and Industrial Development. This development is supported by a Mexican-American scientific cooperation, through a partnership with the University of Arizona (UA), and the Smithsonian Astrophysical Observatory (SAO). M3 Engineering and Technology Corporation in charge of enclosure and building design. The TSPM will be designed to allow flexibility and possible upgrades in order to maximize resources. Its optical and mechanical designs are based upon those of the Magellan and MMT telescopes. The TSPM primary mirror and its cell will be provided by the INAOE and UA. The telescope will be optimized from the near ultraviolet to the near infrared wavelength range (0.35-2.5 m), but will allow observations up to 26μm. The TSPM will initially offer a f/5 Cassegrain focal station. Later, four folded Cassegrain and

  18. Hard x-ray telescope mission

    DEFF Research Database (Denmark)

    Gorenstein, P.; Worrall, D.; Joensen, K.D.

    1996-01-01

    The Hard X-Ray Telescope was selected for study as a possible new intermediate size mission for the early 21st century. Its principal attributes are: (1) multiwavelength observing with a system of focussing telescopes that collectively observe from the UV to over 1 MeV, (2) much higher sensitivity...... and much better angular resolution in the 10 - 100 keV band, and (3) higher sensitivity for detecting gamma ray lines of known energy in the 100 keV to 1 MeV band. This paper emphasizes the mission aspects of the concept study such as the payload configuration and launch vehicle. An engineering team...... at the Marshall Space Center is participating in these two key aspects of the study....

  19. Apochromatic telescope without anomalous dispersion glasses

    Science.gov (United States)

    Duplov, Roman

    2006-07-01

    In order to correct secondary longitudinal chromatic aberration in conventional refracting optical systems, it is necessary to use at least one optical material having anomalous partial dispersion. A novel lens system with correction of the secondary spectrum by using only normal glasses is presented. The lens system comprises three widely separated lens components; both second and third components are subaperture. The presented example of an apochromatic telescope demonstrates secondary spectrum correction with the use of only crown BK7 and flint F2, which are among the most inexpensive optical glasses available at the market. Two more similar designs are presented, both with the use of low-cost slightly anomalous dispersion glasses. These telescopes have a higher relative aperture and a smaller tertiary spectrum.

  20. The microchannel x-ray telescope status

    Science.gov (United States)

    Götz, D.; Meuris, A.; Pinsard, F.; Doumayrou, E.; Tourrette, T.; Osborne, J. P.; Willingale, R.; Sykes, J. M.; Pearson, J. F.; Le Duigou, J. M.; Mercier, K.

    2016-07-01

    We present design status of the Microchannel X-ray Telescope, the focussing X-ray telescope on board the Sino- French SVOM mission dedicated to Gamma-Ray Bursts. Its optical design is based on square micro-pore optics (MPOs) in a Lobster-Eye configuration. The optics will be coupled to a low-noise pnCCD sensitive in the 0.2{10 keV energy range. With an expected point spread function of 4.5 arcmin (FWHM) and an estimated sensitivity adequate to detect all the afterglows of the SVOM GRBs, MXT will be able to provide error boxes smaller than 60 (90% c.l.) arc sec after five minutes of observation.

  1. Photonic Spectrograph for new Technology Telescope (PSTT)

    Science.gov (United States)

    Jones, H. R. A.; PSTT Colaboration

    We outline a high stability precision infrared spectrograph intended for the New Technology Telescope at ESO's La Silla Observatory. This spectrograph known as PSTT (Photonic Spectrograph for new Technology Telescope) is intended to incorporate a number of new technologies that have recently become available, e.g., reformatting photonic lanterns, broadband laser combs and 4k2 infrared arrays. Elements such as OH suppression and an integrated photonic spectrograph should also be considered. The intention is to deliver a high resolution infrared spectrograph that can deliver sub-m/s radial velocity precision to the ESO community. This will enable the opportunity to discover and characterise Earth-mass planets around nearby objects as well as follow-up on results from transit surveys from the ground and space.

  2. Rare Events searches with Cherenkov Telescopes

    Directory of Open Access Journals (Sweden)

    Doro Michele

    2017-01-01

    Full Text Available Ground-based Imaging Cherenkov Telescope Arrays observe the Cherenkov radiation emitted in extended atmospheric showers generated by cosmic gamma rays in the TeV regime. The rate of these events is normally overwhelmed by 2–3 orders of magnitude more abundant cosmic rays induced showers. A large fraction of these “back-ground” events is vetoed at the on-line trigger level, but a substantial fraction still goes through data acquisition system and is saved for the off-line reconstruction. What kind of information those events carry, normally rejected in the analysis? Is there the possibility that an exotic signature is hidden in those data? In the contribution, some science cases, and the problems related to the event reconstruction for the current and future generation of these telescopes will be discussed.

  3. Nanolaminate Membranes as Cylindrical Telescope Reflectors

    Science.gov (United States)

    Dooley, Jennifer; Dragovan, Mark; Hickey, Gregory; Lih, Shyh-Shiu Lih

    2010-01-01

    A document discusses a proposal to use axially stretched metal nanolaminate membranes as lightweight parabolic cylindrical reflectors in the Dual Anamorphic Reflector Telescope (DART) - a planned spaceborne telescope in which the cylindrical reflectors would be arranged to obtain a point focus. The discussion brings together a combination of concepts reported separately in several prior NASA Tech Briefs articles, the most relevant being "Nanolaminate Mirrors With Integral Figure-Control Actuators" NPO -30221, Vol. 26, No. 5 (May 2002), page 90; and "Reflectors Made From Membranes Stretched Between Beams" NPO -30571, Vol. 33, No. 10 (October 2009), page 11a. The engineering issues receiving the greatest emphasis in the instant document are (1) the change in curvature associated with the Poisson contraction of a stretched nanolaminate reflector membrane and (2) the feasibility of using patches of poly(vinylidene fluoride) on the rear membrane surface as piezoelectric actuators to correct the surface figure for the effect of Poisson contraction and other shape errors.

  4. The Nuclear Spectroscopic Telescope Array (NuSTAR)

    DEFF Research Database (Denmark)

    Harrison, Fiona A.; Boggs, Steve; Christensen, Finn Erland

    2010-01-01

    in this energy band. In addition, NuSTAR provides sub-arcminute imaging with good spectral resolution over a 12-arcminute eld of view. After launch, NuSTAR will carry out a two-year primary science mission that focuses on four key programs: studying the evolution of massive black holes through surveys carried...... incidence optics focused onto a solid state CdZnTe pixel detectors. To be launched in early 2012 on a Pegasus rocket into a low-inclination Earth orbit, NuSTAR largely avoids SAA passage, and will therefore have low and stable detector backgrounds. The telescope achieves a 10.14-meter focal length through...... Center (HEASARC) following validation at the science operations center located at Caltech....

  5. Observing Solar System Objects with the James Webb Space Telescope

    Science.gov (United States)

    Sonneborn, George; Issacs, J.; Balzano, V.; Nelan, E.P.; Anandakrishnan, S.; Hammel, H.

    2008-01-01

    The James Webb Space Telescope (JWST) will have the capability to observe Solar System objects having apparent rates of motion up to 30 milliarcseconds/sec. The key science drivers are the study of Kuiper Belt Objects, asteroids, comets, and the outer planets and their moons at near and mid-infrared wavelengths. This poster presents the results from a recent study that defined the conceptual design for a capability for JWST to track and observe moving targets. We illustrate about how guide star acquisition and tracking wi11 be handled while retaining the efficient and flexible execution characteristics of JWST event-driven operations. We also show how the JWST pointing control system can readily support moving target observations. The characteristics of Solar System objects that can be observed by JWST are summarized along with descriptions of the major aspects of moving target science observation planning and on-board event-driven execution.

  6. Telemetry correlation and visualization at the Large Binocular Telescope Observatory

    Science.gov (United States)

    Summers, Kellee R.; Summers, Douglas M.; Biddick, Christopher; Hooper, Stephen

    2016-08-01

    To achieve highly efficient observatory operations requires continuous evaluation and improvement of facility and instrumentation metrics. High quality metrics requires a foundation of robust and complete observatory telemetry. At the Large Binocular Telescope Observatory (LBTO), a variety of telemetry-capturing mechanisms exist, but few tools have thus far been created to facilitate studies of the data. In an effort to make all observatory telemetry data easy to use and broadly available, we have developed a suite of tools using in-house development and open source applications. This paper will explore our strategies for consolidating, parameterizing, and correlating any LBTO telemetry data to achieve easily available, web-based two- and three-dimensional time series data visualization.

  7. Fermi Large Area Space Telescope Offline Software Maintenance Madness

    Science.gov (United States)

    Kelly, H.

    2011-07-01

    The Fermi Observatory, including the Large Area Telescope (LAT), was launched June 11, 2008. The LAT's offline software includes a detailed C++ Monte Carlo simulation built around Geant4 and the Gaudi framework, event by event reconstruction with ROOT output for use within the collaboration, and science tools utilizing FITS which are ultimately distributed to the user community. Within the LAT team, we support Redhat Linux, Windows, and are moving toward Mac OS. We support the use of Visual Studio as a development environment, while we use one build tool for our automated builds across all operating systems. We continue to rely upon nineteen external libraries including: ROOT, Gaudi, Swig, and Xerces. There have been a number of lessons learned, with undoubtedly more to come. This paper will focus on our experiences with our external libraries, maintenance of a large scale offline software project, and support of our developer and user communities.

  8. Radiation length imaging with high resolution telescopes

    OpenAIRE

    Stolzenberg, U.; Frey, A.; Schwenker, B; Wieduwilt, P.; Marinas, C; Lütticke, F.

    2016-01-01

    The construction of low mass vertex detectors with a high level of system integration is of great interest for next generation collider experiments. Radiation length images with a sufficient spatial resolution can be used to measure and disentangle complex radiation length $X$/$X_0$ profiles and contribute to the understanding of vertex detector systems. Test beam experiments with multi GeV particle beams and high-resolution tracking telescopes provide an opportunity to obtain precise 2D imag...

  9. Variable stars with the Kepler space telescope

    OpenAIRE

    Molnár, László; Szabó, Róbert; Plachy, Emese

    2016-01-01

    The Kepler space telescope has revolutionised our knowledge about exoplanets and stars and is continuing to do so in the K2 mission. The exquisite photometric precision, together with the long, uninterrupted observations opened up a new way to investigate the structure and evolution of stars. Asteroseismology, the study of stellar oscillations, allowed us to investigate solar-like stars and to peer into the insides of red giants and massive stars. But many discoveries have been made about cla...

  10. The perfect machine. Building the Palomar telescope.

    Science.gov (United States)

    Florence, R.

    The author's chronicle of the conception of the great 200-inch Palomar telescope is an inspiring account of the birth of big science and of America at its can-do apex. Countless scientists, engineers, administrators, and workmen - from Edwin Hubble, John D. Rockefeller, Elihu Root, and Andrew Carnegie, to unemployed laborers - come alive in this story of two decades of effort to create "the perfect machine".

  11. The high energy telescope on EXIST

    Science.gov (United States)

    Hong, J.; Grindlay, J. E.; Allen, B.; Barthelmy, S. D.; Skinner, G. K.; Gehrels, N.

    2009-08-01

    The Energetic X-ray Imaging Survey Telescope (EXIST) is a proposed next generation multi-wavelength survey mission. The primary instrument is a High Energy telescope (HET) that conducts the deepest survey for Gamma-ray Bursts (GRBs), obscured-accreting and dormant Supermassive Black Holes and Transients of all varieties for immediate followup studies by the two secondary instruments: a Soft X-ray Imager (SXI) and an Optical/Infrared Telescope (IRT). EXIST will explore the early Universe using high redshift GRBs as cosmic probes and survey black holes on all scales. The HET is a coded aperture telescope employing a large array of imaging CZT detectors (4.5 m2, 0.6 mm pixel) and a hybrid Tungsten mask. We review the current HET concept which follows an intensive design revision by the HET imaging working group and the recent engineering studies in the Instrument and Mission Design Lab at the Goddard Space Flight Center. The HET will locate GRBs and transients quickly (<10-30 sec) and accurately (< 20") for rapid (< 1-3 min) onboard followup soft X-ray and optical/IR (0.3-2.2 μm) imaging and spectroscopy. The broad energy band (5-600 keV) and the wide field of view (~90° × 70&° at 10% coding fraction) are optimal for capturing GRBs, obscured AGNs and rare transients. The continuous scan of the entire sky every 3 hours will establish a finely-sampled long-term history of many X-ray sources, opening up new possibilities for variability studies.

  12. Design and development status of the University of Tokyo Atacama Observatory 6.5m telescope

    Science.gov (United States)

    Morokuma, Tomoki; Aoki, Tsutomu; Doi, Mamoru; Handa, Toshihiro; Kamizuka, Takafumi; Kato, Natsuko; Kawara, Kimiaki; Kohno, Kotaro; Konishi, Masahiro; Koshida, Shintaro; Minezaki, Takeo; Miyata, Takashi; Motohara, Kentaro; Sako, Shigeyuki; Soyano, Takao; Takahashi, Hidenori; Tamura, Yoichi; Tanabe, Toshihiko; Tanaka, Masuo; Tarusawa, Ken'ichi; Yoshii, Yuzuru

    2014-07-01

    We here summarize the design and the current fabrication status for the University of Tokyo Atacama Observatory (TAO) 6.5-m telescope. The TAO telescope is operated at one of the best sites for infrared observations, at the summit of Co. Chajnantor in Chile, and is optimized for infrared observations. The telescope mount, mirrors, and mirror support systems are now at the final design phase. The mechanical and optical designs are done by following and referring to those of the Magellan telescopes, MMT, and Large Binocular Telescope. The final focal ratio is 12.2. The field-of-view is as wide as 25 arcmin in diameter and the plate scale is 2.75 arcsec mm-1. The F/1.25 light-weighted borosilicate (Ohara E6) honeycomb primary mirror is adopted and being fabricated by the Steward Observatory Mirror Laboratory. The primary mirror is supported by 104 loadspreaders bonded to the back surface of the mirror and 6 adjustable hardpoints. The mirror is actively controlled by adjusting the actuator forces based on the realtime wavefront measurement. The actuators are optimized for operation at high altitude of the site, 5640-m above the sea level, by considering the low temperature and low air pressure. The mirror is held in the primary mirror cell which is used as a part of the vacuum chamber when the mirror surface is aluminized without being detached from the cell. The pupil is set at the secondary mirror to minimize infrared radiation into instruments. The telescope has two Nasmyth foci for near-infrared and mid-infrared facility instruments (SWIMS and MIMIZUKU, respectively) and one folded-Caseggrain focus for carry-in instruments. At each focus, autoguider and wavefront measurement systems are attached to achieve seeing-limited image quality. The telescope mount is designed as a tripod-disk type alt-azimuth mount. Both the azimuthal and elevation axes are supported by and run on the hydrostatic bearings. Friction drives are selected for these axis drives. The telescope

  13. Australia Telescope National Facility Education Initiatives

    Science.gov (United States)

    Hollow, Robert; Sim, H.

    2008-05-01

    As Australia's largest astronomical institution and a national facility the CSIRO Australia Telescope National Facility (ATNF) plays an important role in supporting effective astronomy education and outreach around Australia. The dedicated Australia Telescope Outreach and Education website has a range of materials, some directly targeted to school syllabus requirements and receives over 330,000 visits annually. ATNF runs a series of astronomy education workshops for schoolteachers and also runs sessions at other teacher conferences and professional development events around Australia. Linkages with regional and state-based institutions such as planetaria and science centres ensure the dissemination of current research to outreach personnel and educators in an effective manner and provide them with astronomy education expertise. With the development of the Australian Square Kilometre Array Pathfinder (ASKAP) and potentially the Square Kilometre Array (SKA) in Australia there is increased focus for and support of astronomy education nationally. ATNF has been active in designing and implementing education projects that specifically link to ASKAP and SKA themes. These include the Wildflowers in the Sky: Astronomy for Mid West WA Schools and PULSE@Parkes. The first takes astronomers and educators to remote outback schools that have high Indigenous student populations; the second gives high school students the chance to control the Parkes radio telescope remotely to observe pulsars. ATNF staff also provide a key role in organizing and coordinating IYA2009 in Australia.

  14. Building the James Webb Space Telescope

    Science.gov (United States)

    Gardner, Jonathan P.

    2012-01-01

    The James Webb Space Telescope is the scientific successor to the Hubble and Spitzer Space Telescopes. It will be a large (6.6m) cold (50K) telescope launched into orbit around the second Earth-Sun Lagrange point. It is a partnership of NASA with the European and Canadian Space Agencies. JWST will make progress In almost every area of astronomy, from the first galaxies to form in the early universe to exoplanets and Solar System objects. Webb will have four instruments: The Near-Infrared Camera, the Near-Infrared multi-object Spectrograph, and the Near-Infrared Imager and Slitless Spectrograph will cover the wavelength range 0.6 to 5 microns, while the Mid-Infrared Instrument will do both imaging and spectroscopy from 5 to 28.5 microns. The observatory Is confirmed for launch in 2018; the design is complete and it is in its construction phase. Innovations that make JWST possible include large-area low-noise infrared detectors, cryogenic ASICs, a MEMS micro-shutter array providing multi-object spectroscopy, a non-redundant mask for interferometric coronagraphy and diffraction-limited segmented beryllium mirrors with active wavefront sensing and control. Recent progress includes the completion of the mirrors, the delivery of the first flight instruments and the start of the integration and test phase.

  15. UV/Visible Telescope with Hubble Disposal

    Science.gov (United States)

    Benford, Dominic J.

    2013-01-01

    Submission Overview: Our primary objective is to convey a sense of the significant advances possible in astrophysics investigations for major Cosmic Origins COR program goals with a 2.4m telescope asset outfitted with one or more advanced UV visible instruments. Several compelling science objectives were identified based on community meetings these science objectives drove the conceptual design of instruments studied by the COR Program Office during July September 2012. This RFI submission encapsulates the results of that study, and suggests that a more detailed look into the instrument suite should be conducted to prove viability and affordability to support the demonstrated scientific value. This study was conducted in the context of a larger effort to consider the options available for a mission to dispose safely of Hubble hence, the overall architecture considered for the mission we studied for the 2.4m telescope asset included resource sharing. This mitigates combined cost and risk and provides naturally for a continued US leadership role in astrophysics with an advanced, general-purpose UV visible space telescope.

  16. Preliminary Analysis of Ground-based Orbit Determination Accuracy for the Wide Field Infrared Survey Telescope (WFIRST)

    Science.gov (United States)

    Sease, Brad

    2017-01-01

    The Wide Field Infrared Survey Telescope is a 2.4-meter telescope planned for launch to the Sun-Earth L2 point in 2026. This paper details a preliminary study of the achievable accuracy for WFIRST from ground-based orbit determination routines. The analysis here is divided into two segments. First, a linear covariance analysis of early mission and routine operations provides an estimate of the tracking schedule required to meet mission requirements. Second, a simulated operations scenario gives insight into the expected behavior of a daily Extended Kalman Filter orbit estimate over the first mission year given a variety of potential momentum unloading schemes.

  17. 1608-2008: Clarifying the Anniversary of the Telescope

    Science.gov (United States)

    Abrahams, Peter

    2007-12-01

    2008 will mark the quadricentennial of the telescope, a simple instrument with an ambiguous origin. It is possible that objects similar to telescopes existed many years before 1608, and very likely that telescopes were in use shortly before 1608. The question of the utility of these optical devices is unknown, but they were not likely to be reasonably functional. As an instrument is incrementally improved to the point of practicality, the date of 'invention' is difficult to define. 1608 is the year of the first telescope with associated unambiguous documentation surviving into the modern era. When Hans Lipperhey applied for a patent covering his telescope in October 1608, the proceedings became the earliest account of a telescope that can be dated with certainty and leave no question that it was a functional instrument. However, the patent application was denied, the rejection stating that the reason was prior art. More important is the circumstance that Lipperhey's telescope is the example that began the very rapid dissemination of telescopes. The instrument had been reported in diplomatic channels even before the patent application was filed, telescopes were fabricated elsewhere within weeks and in many locations within the year, and were exported around the globe to Japan within 5 years. In contrast, any previous telescopes were kept secret, or were inoperable prototypes, or were a proposal or design that was not fabricated. These predecessors had little or no effect on the course of history, as compared to Lipperhey's invention, which initiated the course of events that led to today's telescopes.

  18. Measuring Visual Double Stars with Robotic Telescopes

    Science.gov (United States)

    Boyce, Pat; Boyce, Grady; Genet, Russell M.; Faisal Al-Zaben, Dewei Li, Yongyao Li, Aren Dennis, Zhixin Cao, Junyao Li, Steven Qu, Jeff Li, Michael Fene, Allen Priest, Stephen Priest, Rex Qiu, , and, Bill Riley

    2016-06-01

    The Astronomy Research Seminars introduce students to scientific research by carrying out the entire process: planning a scientific research project, writing a research proposal, gathering and analyzing observational data, drawing conclusions, and presenting the research results in a published paper and presentation.In 2015 Cuesta College and Russell Genet sponsored a new hybrid format for the seminar enabling distance learning. Boyce Research Initiatives and Education Foundation (BRIEF) conducted the course at The Army and Navy Academy (ANA) in Carlsbad, California, in the spring and fall of 2015.The course objective is to complete the research and publish the paper within one semester. Our program schedule called for observations to be performed within a two week period. Measurement of visual binary stars was chosen because sufficient observations could be made in just two evenings of good weather. We quickly learned that our location by the ocean did not provide reliable weather to use local telescopes.The iTelescope network of robotic telescopes located in Australia, Spain and the U.S. solved the problem. Reservations for these systems are booked online and include date, time, exposure and filters. The high quality telescopes range from 4" to 27" in size with excellent cameras. By watching the weather forecasts for the sites, we were able to schedule our observations within the two week time frame required.Timely and reliable data reduction was the next hurdle. The students were using widely varying equipment (PCs, MACs, tablets, smart phones) with incompatible software. After wasting time trying to be computer technicians, we settled a on standard set of software relying on Mirametrics' Mira Pro x64. We installed the software on an old laptop, downloaded the iTelescope data files, gave the students remote access using GoToMyPC.These efficiencies enabled us to meet the demanding one semester schedule and assure a better learning experience. We have been able to

  19. Classic Telescopes A Guide to Collecting, Restoring, and Using Telescopes of Yesteryear

    CERN Document Server

    English, Neil

    2013-01-01

    Classic Telescopes explores the exciting world of telescopes past, as well as the possibilities involved in acquiring these instruments. What are classic telescopes? First, the book takes a look at the more traditional telescopes built by the great instrument makers of the eighteenth and nineteenth centuries and the dynastic houses founded by the likes of John Dollond, Alvan Clark, Thomas Cooke & Sons and Carl Zeiss, plus some lesser-known luminaries, including John Brashear, John Calver, and Henry Fitz. Instruments constructed from the 1950s until as recently as the early 1990s are now also considered 'classic.' There is thus a very active market for buying and selling these 'modern' classics. The author examines some of the most talked about instruments on the amateur Internet forums, including the Unitron refractors, the Questar 90, a classic 6-inch reflector, the RV-6; a 3-inch F/15 achromat by Fullerscopes; the time-honored AstroScan Richfield reflector; and many, many more. Classic telescopes are of...

  20. Calibration and testing of a prototype of the JEM-EUSO telescope on Telescope Array site

    Directory of Open Access Journals (Sweden)

    Tsunesada Y.

    2013-06-01

    Full Text Available Aim of the TA-EUSO project is to install a prototype of the JEM-EUSO telescope on the Telescope Array site in Black Rock Mesa, Utah and perform observation of natural and artificial ultraviolet light. The detector consists of one Photo Detector Module (PDM, identical to the 137 present on the JEM-EUSO focal surface. Each PDM is composed by 36 Hamamatsu multi-anode photomultipliers (64 channels per tube, for a total of 2304 channels. Front-End readout is performed by 36 ASICS, with trigger and readout tasks performed by two FPGA boards that send the data to a CPU and storage system. Two, 1 meter side square Fresnel lenses provide a field-of-view of 8 degrees. The telescope will be housed in a container located in front of the fluorescence detector of the Telescope Array collaboration, looking in the direction of the ELF (Electron Light Source and CLF (Central Laser Facility. Aim of the project is to calibrate the response function of the EUSO telescope with the TA fluorescence detector in presence of a shower of known intensity and distribution. An initial run of about six months starting from end 2012 is foreseen, during which we expect to observe, triggered by TA electronics, a few cosmic ray events which will be used to further refine the calibration of the EUSO-Ground with TA. Medium term plans include the increase of the number of PDM and therefore the field of view.

  1. Vibration measurements of the Daniel K. Inouye Solar Telescope mount, Coudé rotator, and enclosure assemblies

    Science.gov (United States)

    McBride, William R.; McBride, Daniel R.

    2016-08-01

    The Daniel K. Inouye Solar Telescope (DKIST) will be the largest solar telescope in the world, with a 4-meter off-axis primary mirror and 16 meter rotating Coudé laboratory within the telescope pier. The off-axis design requires a mount similar to an 8-meter on-axis telescope. Both the telescope mount and the Coudé laboratory utilize a roller bearing technology in place of the more commonly used hydrostatic bearings. The telescope enclosure utilizes a crawler mechanism for the altitude axis. As these mechanisms have not previously been used in a telescope, understanding the vibration characteristics and the potential impact on the telescope image is important. This paper presents the methodology used to perform jitter measurements of the enclosure and the mount bearings and servo system in a high-noise environment utilizing seismic accelerometers and high dynamic-range data acquisition equipment, along with digital signal processing (DSP) techniques. Data acquisition and signal processing were implemented in MATLAB. In the factory acceptance testing of the telescope mount, multiple accelerometers were strategically located to capture the six axes-of-motion of the primary and secondary mirror dummies. The optical sensitivity analysis was used to map these mirror mount displacements and rotations into units of image motion on the focal plane. Similarly, tests were done with the Coudé rotator, treating the entire rotating instrument lab as a rigid body. Testing was performed by recording accelerometer data while the telescope control system performed tracking operations typical of various observing scenarios. The analysis of the accelerometer data utilized noise-averaging fast Fourier transform (FFT) routines, spectrograms, and periodograms. To achieve adequate dynamic range at frequencies as low as 3Hz, the use of special filters and advanced windowing functions were necessary. Numerous identical automated tests were compared to identify and select the data sets

  2. The University of Tokyo Atacama Observatory 6.5m telescope: project overview and current status

    Science.gov (United States)

    Yoshii, Y.; Doi, M.; Kohno, K.; Miyata, T.; Motohara, K.; Kawara, K.; Tanaka, M.; Minezaki, T.; Sako, S.; Morokuma, T.; Tamura, Y.; Tanabe, T.; Takahashi, H.; Konishi, M.; Kamizuka, T.; Kato, N.; Aoki, T.; Soyano, T.; Tarusawa, K.; Handa, T.; Koshida, S.; Bronfman, L.; Ruiz, M. T.; Hamuy, M.; Garay, G.

    2016-07-01

    The University of Tokyo Atacama Observatory Project is to construct a 6.5m infrared telescope at the summit of Co. Chajnantor (5640m altitude) in northern Chile, promoted by the University of Tokyo. Thanks to the dry climate (PWV 0.5mm) and the high altitude, it will achieve excellent performance in the NIR to MIR wavelengths. The telescope has two Nasmyth foci where the facility instruments are installed and two folded-Cassegrain foci for carry-in instruments. All these four foci can be switched by rotating a tertiary mirror. The final focal ratio is 12.2 and the telescope foci have large field-of-view of 25° in diameter. We adopted the 6.5m light-weighted borosilicate honeycomb primary mirror and its support system that are developed by Steward Observatory Richard F. Caris Mirror Lab. The dome enclosure has the shape of carousel, and large ventilation windows with shutters control the wind to flush heat inside the dome. The operation building with control room, aluminizing chamber and maintenance facilities is located at the side of the dome. Two cameras, SWIMS for spectroscopy and imaging in the near-infrared and MIMIZUKU in the mid-infrared, are being developed as the first-generation facility instruments. The operation of the telescope will be remotely carried out from a base facility at San Pedro de Atacama, 50km away from the summit. The construction of the telescope is now underway. Fabrication of the telescope mount has almost finished, and the pre-assembly has been carried out in Japan. The primary, secondary, and tertiary mirrors and their cells have been also fabricated, as well as their cells and support systems. Fabrication of the enclosure is now underway, and their pre-assembly in Japan will be carried out in 2016. Construction of the base facility at San Pedro de Atacama has been already completed in 2014, and operated for the activities in Atacama. The telescope is now scheduled to see the first light at the beginning of 2018.

  3. Cryo-Vacuum Testing of JWST's Integrated Telescope & Scientific Instrument Suite (OTIS)

    Science.gov (United States)

    Kimble, Randy; Apollo, Peter; Feinberg, Lee; Glazer, Stuart; Hanley, Jeffrey; Keski-Kuha, Ritva; Kirk, Jeffrey; Knight, J. Scott; Lambros, Scott; Lander, Juli; McGuffey, Douglas; Mehalick, Kimberly; Ohl, Raymond; Ousley, Wes; Reis, Carl; Reynolds, Paul; Begoña Vila, Maria; Waldman, Mark; Whitman, Tony

    2018-01-01

    A year ago we reported on the planning for a major test in the James Webb Space Telescope (JWST) program: cryo-vacuum testing of the combination of the Optical Telescope Element (OTE) and the Integrated Science Instrument Module (ISIM). The cryo-vacuum testing of that scientific heart of the JWST observatory, known as OTIS (= OTE + ISIM), has now been completed in historic chamber A at NASA’s Johnson Space Center. From July through October 2017, the flight payload was cooled to its operating temperatures, put through a comprehensive suite of optical, thermal, and operational tests, and then safely warmed back to room temperature. We report here on the execution and top-level results from this milestone event in the JWST program.

  4. Report of the facility definition team spacelab UV-Optical Telescope Facility

    Science.gov (United States)

    1975-01-01

    Scientific requirements for the Spacelab Ultraviolet-Optical Telescope (SUOT) facility are presented. Specific programs involving high angular resolution imagery over wide fields, far ultraviolet spectroscopy, precisely calibrated spectrophotometry and spectropolarimetry over a wide wavelength range, and planetary studies, including high resolution synoptic imagery, are recommended. Specifications for the mounting configuration, instruments for the mounting configuration, instrument mounting system, optical parameters, and the pointing and stabilization system are presented. Concepts for the focal plane instruments are defined. The functional requirements of the direct imaging camera, far ultraviolet spectrograph, and the precisely calibrated spectrophotometer are detailed, and the planetary camera concept is outlined. Operational concepts described in detail are: the makeup and functions of shuttle payload crew, extravehicular activity requirements, telescope control and data management, payload operations control room, orbital constraints, and orbital interfaces (stabilization, maneuvering requirements and attitude control, contamination, utilities, and payload weight considerations).

  5. Enthusiasm for Europe's space telescope ISO

    Science.gov (United States)

    1996-11-01

    down 75 per cent of the proposed observations. Nevertheless the allocations announced this month will meet the wishes of most groups of applicants at least in part. ISO is now about half way through its operating life. An Ariane 44P launcher put it into orbit on 17 November 1995. ISO's superfluid helium which keeps the telescope and instruments cold, will last about six months longer than required in the specification. Operations are expected to continue until December 1997, with the benefit that the chemically rich and starmaking clouds of the important Orion region of the sky will be observable by ISO. Tracing the origin of planets Observations of the Antennae galaxies, and some of the other ISO results now described in full technical detail in Astronomy and Astrophysics, were outlined in earlier ESA Information Notes, 02-96 and 14-96. These include examinations of star formation in many galaxies and within dust clouds in our own Galaxy, the Milky Way. ISO has also given a big boost to astrochemistry by identifying infrared signatures of many materials, which play a physical as well as a chemical role in the evolution of galaxies and stars. The materials seen by ISO include ionized carbon atoms, sooty carbon compounds, hydrogen molecules, water molecules, and frozen carbon dioxide and methane. The latest results tell of mineral crystals, which may shed light on the origin of the Earth itself. Disks of dust around some stars, of the kind from which planets might evolve, were a major discovery in infrared astronomy by ISO's predecessor, the Dutch US UK satellite IRAS (1983). The prototype was the bright northern star Vega. It showed excess emissions of long-wavelength infrared rays, which could not come from the star itself. Subsequent studies confirmed the dust disks of Vega and a few other stars, and the search for more such disks is a major programme for ISO, relying particularly on measurements by the photometer ISOPHOT across a wide range of infrared wavelengths

  6. Using frequency response functions to manage image degradation from equipment vibration in the Daniel K. Inouye Solar Telescope

    Science.gov (United States)

    McBride, William R.; McBride, Daniel R.

    2016-08-01

    The Daniel K Inouye Solar Telescope (DKIST) will be the largest solar telescope in the world, providing a significant increase in the resolution of solar data available to the scientific community. Vibration mitigation is critical in long focal-length telescopes such as the Inouye Solar Telescope, especially when adaptive optics are employed to correct for atmospheric seeing. For this reason, a vibration error budget has been implemented. Initially, the FRFs for the various mounting points of ancillary equipment were estimated using the finite element analysis (FEA) of the telescope structures. FEA analysis is well documented and understood; the focus of this paper is on the methods involved in estimating a set of experimental (measured) transfer functions of the as-built telescope structure for the purpose of vibration management. Techniques to measure low-frequency single-input-single-output (SISO) frequency response functions (FRF) between vibration source locations and image motion on the focal plane are described. The measurement equipment includes an instrumented inertial-mass shaker capable of operation down to 4 Hz along with seismic accelerometers. The measurement of vibration at frequencies below 10 Hz with good signal-to-noise ratio (SNR) requires several noise reduction techniques including high-performance windows, noise-averaging, tracking filters, and spectral estimation. These signal-processing techniques are described in detail.

  7. The Hopkins Ultraviolet Telescope: The Final Archive

    Science.gov (United States)

    Dixon, William V.; Blair, William P.; Kruk, Jeffrey W.; Romelfanger, Mary L.

    2013-01-01

    The Hopkins Ultraviolet Telescope (HUT) was a 0.9 m telescope and moderate-resolution (Delta)lambda equals 3 A) far-ultraviolet (820-1850 Å) spectrograph that flew twice on the space shuttle, in 1990 December (Astro-1, STS-35) and 1995 March (Astro-2, STS-67). The resulting spectra were originally archived in a nonstandard format that lacked important descriptive metadata. To increase their utility, we have modified the original datareduction software to produce a new and more user-friendly data product, a time-tagged photon list similar in format to the Intermediate Data Files (IDFs) produced by the Far Ultraviolet Spectroscopic Explorer calibration pipeline. We have transferred all relevant pointing and instrument-status information from locally-archived science and engineering databases into new FITS header keywords for each data set. Using this new pipeline, we have reprocessed the entire HUT archive from both missions, producing a new set of calibrated spectral products in a modern FITS format that is fully compliant with Virtual Observatory requirements. For each exposure, we have generated quicklook plots of the fully-calibrated spectrum and associated pointing history information. Finally, we have retrieved from our archives HUT TV guider images, which provide information on aperture positioning relative to guide stars, and converted them into FITS-format image files. All of these new data products are available in the new HUT section of the Mikulski Archive for Space Telescopes (MAST), along with historical and reference documents from both missions. In this article, we document the improved data-processing steps applied to the data and show examples of the new data products.

  8. PLATO: a multiple telescope spacecraft for exo-planets hunting

    Science.gov (United States)

    Ragazzoni, Roberto; Magrin, Demetrio; Rauer, Heike; Pagano, Isabella; Nascimbeni, Valerio; Piotto, Giampaolo; Piazza, Daniele; Levacher, Patrick; Schweitzer, Mario; Basso, Stefano; Bandy, Timothy; Benz, Willy; Bergomi, Maria; Biondi, Federico; Boerner, Anko; Borsa, Francesco; Brandeker, Alexis; Brändli, Mathias; Bruno, Giordano; Cabrera, Juan; Chinellato, Simonetta; De Roche, Thierry; Dima, Marco; Erikson, Anders; Farinato, Jacopo; Munari, Matteo; Ghigo, Mauro; Greggio, Davide; Gullieuszik, Marco; Klebor, Maximilian; Marafatto, Luca; Mogulsky, Valery; Peter, Gisbert; Rieder, Martin; Sicilia, Daniela; Spiga, Daniele; Viotto, Valentina; Wieser, Matthias; Heras, Ana Maria; Gondoin, Philippe; Bodin, Pierre; Catala, Claude

    2016-07-01

    PLATO stands for PLAnetary Transits and Oscillation of stars and is a Medium sized mission selected as M3 by the European Space Agency as part of the Cosmic Vision program. The strategy behind is to scrutinize a large fraction of the sky collecting lightcurves of a large number of stars and detecting transits of exo-planets whose apparent orbit allow for the transit to be visible from the Earth. Furthermore, as the transit is basically able to provide the ratio of the size of the transiting planet to the host star, the latter is being characterized by asteroseismology, allowing to provide accurate masses, radii and hence density of a large sample of extra solar bodies. In order to be able to then follow up from the ground via spectroscopy radial velocity measurements these candidates the search must be confined to rather bright stars. To comply with the statistical rate of the occurrence of such transits around these kind of stars one needs a telescope with a moderate aperture of the order of one meter but with a Field of View that is of the order of 50 degrees in diameter. This is achieved by splitting the optical aperture into a few dozens identical telescopes with partially overlapping Field of View to build up a mixed ensemble of differently covered area of the sky to comply with various classes of magnitude stars. The single telescopes are refractive optical systems with an internally located pupil defined by a CaF2 lens, and comprising an aspheric front lens and a strong field flattener optical element close to the detectors mosaic. In order to continuously monitor for a few years with the aim to detect planetary transits similar to an hypothetical twin of the Earth, with the same revolution period, the spacecraft is going to be operated while orbiting around the L2 Lagrangian point of the Earth-Sun system so that the Earth disk is no longer a constraints potentially interfering with such a wide field continuous uninterrupted survey.

  9. ARTIP: Automated Radio Telescope Image Processing Pipeline

    Science.gov (United States)

    Sharma, Ravi; Gyanchandani, Dolly; Kulkarni, Sarang; Gupta, Neeraj; Pathak, Vineet; Pande, Arti; Joshi, Unmesh

    2018-02-01

    The Automated Radio Telescope Image Processing Pipeline (ARTIP) automates the entire process of flagging, calibrating, and imaging for radio-interferometric data. ARTIP starts with raw data, i.e. a measurement set and goes through multiple stages, such as flux calibration, bandpass calibration, phase calibration, and imaging to generate continuum and spectral line images. Each stage can also be run independently. The pipeline provides continuous feedback to the user through various messages, charts and logs. It is written using standard python libraries and the CASA package. The pipeline can deal with datasets with multiple spectral windows and also multiple target sources which may have arbitrary combinations of flux/bandpass/phase calibrators.

  10. Astrobiology with Robotic Telescopes at CAB

    Directory of Open Access Journals (Sweden)

    Luis Cuesta

    2010-01-01

    Full Text Available The key objectives of RTRCAB are the identification of new exoplanets and especially the characterization of the known exoplanets by observing photometric and systematic monitoring of their transits. These telescopes, equipped with advanced technology, optimized control programs, and optical and technical characteristics adequate for this purpose, are ideal to make the observations that are required to carry out these programs. The achievement of these goals is ensured by the existence of three separated geographical stations. In this sense, there are several planned missions that have the same objectives among their scientific goals, like Kepler, CoRoT, GAIA, and PLATO.

  11. Design Concepts for the Cherenkov Telescope Array

    OpenAIRE

    Actis, M.; Agnetta, G.; Aharonian, F.; Akhperjanian, A.; Aleksić, J.; Aliu, E.; ALLAN, D.; Allekotte, I.; Antico, F.; Antonelli, L. A.; Antoranz, P.; Aravantinos, A.; Arlen, T.; Arnaldi, H.; Artmann, S.

    2010-01-01

    Ground-based gamma-ray astronomy has had a major breakthrough with the impressive results obtained using systems of imaging atmospheric Cherenkov telescopes. Ground-based gamma-ray astronomy has a huge potential in astrophysics, particle physics and cosmology. CTA is an international initiative to build the next generation instrument, with a factor of 5-10 improvement in sensitivity in the 100 GeV to 10 TeV range and the extension to energies well below 100 GeV and above 100 TeV. CTA will con...

  12. Supernova Remnants with Fermi Large Area Telescope

    Directory of Open Access Journals (Sweden)

    Caragiulo M.

    2017-01-01

    Full Text Available The Large Area Telescope (LAT, on-board the Fermi satellite, proved to be, after 8 years of data taking, an excellent instrument to detect and observe Supernova Remnants (SNRs in a range of energies running from few hundred MeV up to few hundred GeV. It provides essential information on physical processes that occur at the source, involving both accelerated leptons and hadrons, in order to understand the mechanisms responsible for the primary Cosmic Ray (CR acceleration. We show the latest results in the observation of Galactic SNRs by Fermi-LAT.

  13. Planning, scheduling, and control for automatic telescopes

    Science.gov (United States)

    Drummond, Mark; Swanson, Keith; Philips, Andy; Levinson, Rich; Bresina, John

    1992-01-01

    This paper presents an argument for the appropriateness of Entropy Reduction Engine (ERE) technology to the planning, scheduling, and control components of Automatic Photoelectric Telescope (APT) management. The paper is organized as follows. In the next section, we give a brief summary of the planning and scheduling requirements for APTs. Following this, in section 3, we give an ERE project precis, couched primarily in terms of project objectives. Section 4 gives a sketch of the match-up between problem and technology, and section 5 outlines where we want to go with this work.

  14. Telescope stray light: early experience with SOFIA

    Science.gov (United States)

    Waddell, Patrick; Becklin, Eric E.; Hamilton, Ryan T.; Vacca, William D.; Lachenmann, Michael

    2016-09-01

    Effective stray light control is a key requirement for wide dynamic range performance of scientific optical and infrared systems. SOFIA now has over 325 mission flights including extended southern hemisphere deployments; science campaigns using 7 different instrument configurations have been completed. The research observations accomplished on these missions indicate that the telescope and cavity designs are effective at suppressing stray light. Stray light performance impacts, such as optical surface contamination, from cavity environment conditions during mission flight cycles and while on-ground, have proved to be particularly benign. When compared with earlier estimates, far fewer large optics re-coatings are now anticipated, providing greater facility efficiency.

  15. Muon imaging of volcanoes with Cherenkov telescopes

    Science.gov (United States)

    Carbone, Daniele; Catalano, Osvaldo; Cusumano, Giancarlo; Del Santo, Melania; La Parola, Valentina; La Rosa, Giovanni; Maccarone, Maria Concetta; Mineo, Teresa; Pareschi, Giovanni; Sottile, Giuseppe; Zuccarello, Luciano

    2017-04-01

    The quantitative understanding of the inner structure of a volcano is a key feature to model the processes leading to paroxysmal activity and, hence, to mitigate volcanic hazards. To pursue this aim, different geophysical techniques are utilized, that are sensitive to different properties of the rocks (elastic, electrical, density). In most cases, these techniques do not allow to achieve the spatial resolution needed to characterize the shallowest part of the plumbing system and may require dense measurements in active zones, implying a high level of risk. Volcano imaging through cosmic-ray muons is a promising technique that allows to overcome the above shortcomings. Muons constantly bombard the Earth's surface and can travel through large thicknesses of rock, with an energy loss depending on the amount of crossed matter. By measuring the absorption of muons through a solid body, one can deduce the density distribution inside the target. To date, muon imaging of volcanic structures has been mainly achieved with scintillation detectors. They are sensitive to noise sourced from (i) the accidental coincidence of vertical EM shower particles, (ii) the fake tracks initiated from horizontal high-energy electrons and low-energy muons (not crossing the target) and (iii) the flux of upward going muons. A possible alternative to scintillation detectors is given by Cherenkov telescopes. They exploit the Cherenkov light emitted when charged particles (like muons) travel through a dielectric medium, with velocity higher than the speed of light. Cherenkov detectors are not significantly affected by the above noise sources. Furthermore, contrarily to scintillator-based detectors, Cherenkov telescopes permit a measurement of the energy spectrum of the incident muon flux at the installation site, an issue that is indeed relevant for deducing the density distribution inside the target. In 2014, a prototype Cherenkov telescope was installed at the Astrophysical Observatory of Serra

  16. Galileo's Instruments of Credit Telescopes, Images, Secrecy

    CERN Document Server

    Biagioli, Mario

    2006-01-01

    In six short years, Galileo Galilei went from being a somewhat obscure mathematics professor running a student boarding house in Padua to a star in the court of Florence to the recipient of dangerous attention from the Inquisition for his support of Copernicanism. In that brief period, Galileo made a series of astronomical discoveries that reshaped the debate over the physical nature of the heavens: he deeply modified the practices and status of astronomy with the introduction of the telescope and pictorial evidence, proposed a radical reconfiguration of the relationship between theology and a

  17. First light of the 1.6 meter off-axis New Solar Telescope at Big Bear Solar Observatory

    Science.gov (United States)

    Cao, Wenda; Gorceix, Nicolas; Coulter, Roy; Coulter, Aaron; Goode, Philip R.

    2010-07-01

    New Jersey Institute of Technology, in collaboration with the University of Hawaii and the Korea Astronomy & Space Science Institute, has successfully developed and installed a 1.6 m clear aperture, off-axis New Solar Telescope (NST) at the Big Bear Solar Observatory. The NST will be the largest aperture solar telescope in the world until the 4 m Advanced Technology Solar Telescope (ATST) and 4 m European Solar Telescope (EST) begin operation in the next decade. Meanwhile, the NST will be the largest off-axis telescope before the 8.4 m segmented Giant Magellan Telescope (GMT) comes on-line. The NST is configured as an off-axis Gregorian system consisting of a parabolic primary, prime focus field stop and heat reflector, elliptical secondary and diagonal flats. The primary mirror is made of Zerodur from Schott and figured to a final residual error of 16 nm rms by Steward Observatory Mirror Lab. The final focal ratio is f/52. The 180 circular opening in the field stop defines the maximal square field-of-view. The working wavelength range will cover 0.4 to 1.7 μm in the Coud´e Lab two floors beneath the telescope, and all wavelengths including far infrared at the Nasmyth focus on an optical bench attached to the side of the telescope structure. First-light scientific observations have been attained at the Nasmyth focus and in the Coud´e Lab. This paper presents a detailed description of installation and alignment of the NST. First-light observational results are also shown to demonstrate the validity of the NST optical alignment.

  18. Preliminary results of V440 Per and α UMi observations with the Poznan Spectroscopic Telescope

    Science.gov (United States)

    Fagas, M.; Baranowski, R.; Bartczak, P.; Borczyk, W.; Dimitrow, W.; Kaminski, K.; Kwiatkowski, T.; Ratajczak, R.; Rozek, A.; Schwarzenberg-Czerny, A.

    2009-03-01

    Presented herein are preliminary radial velocity results for two classical Cepheids: V440 Per and α UMi (Polaris). Both stars have been observed with the Poznan Spectroscopic Telescope (PST), operational since Aug 2007 at the Borowiec Station of Poznań Astronomical Observatory in Poland. Data obtained for V440 Per suggest the presence of a low-amplitude secondary mode of pulsations. Results of α UMi observations confirm further pulsation amplitude growth, as observed during the last decades.

  19. X-shooter, the new wide band intermediate resolution spectrograph at the ESO Very Large Telescope

    DEFF Research Database (Denmark)

    Vernet, J.; Dekker, H.; D'Odorico, S.

    2011-01-01

    X-shooter is the first 2nd generation instrument of the ESO Very Large Telescope (VLT). It is a very efficient, single-target, intermediate-resolution spectrograph that was installed at the Cassegrain focus of UT2 in 2009. The instrument covers, in a single exposure, the spectral range from 300...... characteristics of the instrument and present its performance as measured during commissioning, science verification and the first months of science operations. © ESO, 2011....

  20. An Imaging Fourier Transform Spectrometer for the Next Generation Space Telescope

    OpenAIRE

    Graham, James R.

    1999-01-01

    Due to its simultaneous deep imaging and integral field spectroscopic capability, an Imaging Fourier Transform Spectrograph (IFTS) is ideally suited to the Next Generation Space Telescope (NGST) mission, and offers opportunities for tremendous scientific return in many fields of astrophysical inquiry. We describe the operation and quantify the advantages of an IFTS for space applications. The conceptual design of the Integral Field Infrared Spectrograph (IFIRS) is a wide field (5'.3 x 5'.3) f...

  1. Load test with the mobile telescopic crane (160 T) for handling LHC magnets

    CERN Multimedia

    Patrice Loïez

    2002-01-01

    CERN has taken delivery of a new telescopic mobile crane. The new crane will be required to load LHC dipole magnets made in Building SM18 onto a trailer that will take them to the Prévessin site, where they will be put in storage until they can be lowered into the tunnel. It has passed its first operating tests, which consisted of lifting a 37-tonne concrete block.

  2. First Images of a Three-Layer Compton Telescope Prototype for Treatment Monitoring in Hadron Therapy.

    Science.gov (United States)

    Llosá, Gabriela; Trovato, Marco; Barrio, John; Etxebeste, Ane; Muñoz, Enrique; Lacasta, Carlos; Oliver, Josep F; Rafecas, Magdalena; Solaz, Carles; Solevi, Paola

    2016-01-01

    A Compton telescope for dose monitoring in hadron therapy is under development at IFIC. The system consists of three layers of LaBr3 crystals coupled to silicon photomultiplier arrays. (22)Na sources have been successfully imaged reconstructing the data with an ML-EM code. Calibration and temperature stabilization are necessary for the prototype operation at low coincidence rates. A spatial resolution of 7.8 mm FWHM has been obtained in the first imaging tests.

  3. The Space Grant Internet Telescope Network (SGITN): The beginning

    Science.gov (United States)

    Hardersen, Paul S.

    2007-12-01

    The Space Grant Internet Telescope Network (SGITN) is envisioned as a national network of Internet-controllable astronomical observatories that will be available to university students and faculty residing in participating NASA Space Grant states. Our goal is to provide no-cost astronomical resources to non-AURA colleges and universities, with the hope of expanding student and faculty access to astronomical facilities and to encourage students to pursue research careers in astronomy and planetary science. The Network has been created and is managed by the North Dakota Space Grant Consortium, which is a part of the NASA Space Grant College and Fellowship Program. The SGITN began operations on August 1, 2007, with small observatories in North and South Dakota. Telescope apertures range from 10- to 26-inches and support astrometric and photometric research opportunities. Most observatories are controlled via ACP Observatory Control Software, but use of this particular software is not required. However, all participating observatories must be remotely controllable. The UND Observatory, west of Grand Forks, ND, will ultimately contribute four observatories to this Network, while South Dakota is contributing the Badlands Observatory. A new observatory in Utah will join the Network by 12/31/2007. Our goal is to attract > 15 observatories to this Network in the coming years, which will support a large user base and enable unique projects, such as near-Earth asteroid distance determinations. Current users access Network facilities via the SGITN home page at http://sgitn.space.edu. Eligible students and faculty submit observing proposals for consideration and should contribute to a scientifically valid and justifiable research project. All of the necessary forms and information are on the web site and are downloadable as PDF documents. Qualified users work with the SGITN to schedule observing dates and times. Users are encouraged to post their results on the SGITN web site.

  4. Redshift measurement of Fermi blazars for the Cherenkov telescope array

    Science.gov (United States)

    Pita, S.; Goldoni, P.; Boisson, C.; Cotter, G.; Lefaucheur, J.; Lenain, J.-P.; Lindfors, E.; Williams, D. A.

    2017-01-01

    Blazars are active galactic nuclei, and the most numerous High Energy (HE) and Very High Energy (VHE) γ-ray emitters. Their optical emission is often dominated by non-thermal, and, in the case of BL Lacs, featureless continuum radiation. This makes the determination of their redshift extremely difficult. Indeed, as of today only about 50% of γ-ray blazars have a measured spectroscopic redshift. The knowledge of redshift is fundamental because it allows the precise modeling of the VHE emission and also of its interaction with the extragalactic background light (EBL). The beginning of the Cherenkov Telescope Array (CTA) operations in the near future will allow the detection of several hundreds of new blazars. Using the Fermi catalogue of sources above 50 GeV (2FHL), we performed simulations which indicate that a significant fraction of the 2FHL blazars detectable by CTA will not have a measured redshift. As a matter of fact, the organization of observing campaigns to measure the redshift of these blazars has been recognized as a necessary support for the AGN Key Science Project of CTA. We are planning such an observing campaign. In order to optimize our chances of success, we will perform preliminary deep imaging observations aimed at detecting or setting upper limits to the host galaxy. We will then take spectra of the candidates with the brightest host galaxies. Taking advantage of the recent success of an X-shooter GTO observing campaign, these observations will be different with respect to previous ones due to the use of higher resolution spectrographs and of 8 meter class telescopes. We are starting to submit proposals for these observations. In this paper we briefly describe how candidates are selected and the corresponding observation program.

  5. An Airborne Infrared Telescope and Spectrograph for Solar Eclipse Observations

    Science.gov (United States)

    DeLuca, Edward E.; Cheimets, Peter; Golub, Leon

    2014-06-01

    The solar infrared spectrum offers great possibilities for direct spatially resolved measurements of the solar coronal magnetic fields, via imaging of the plasma that is constrained to follow the magnetic field direction and via spectro-polarimetry that permits measurement of the field strength in the corona. Energy stored in coronal magnetic fields is released in flares and coronal mass ejections (CME) and provides the ultimate source of energy for space weather. The large scale structure of the coronal field, and the opening up of the field in a transition zone between the closed and open corona determines the speed and structure of the solar wind, providing the background environment through which CMEs propagate. At present our only direct measurements of the solar magnetic fields are in the photosphere and chromosphere. The ability to determine where and why the corona transitions from closed to open, combined with measurements of the field strength via infrared coronal spectro-polarimetry will give us a powerful new tool in our quest to develop the next generation of forecasting models.We describe a first step in achieving this goal: a proposal for a new IR telescope, image stabilization system, and spectrometer, for the NCAR HIPER GV aircraft. The telescope/spectrograph will operate in the 2-6micron wavelength region, during solar eclipses, starting with the trans-north American eclipse in August 2017. The HIAPER aircraft flying at ~35,000 ft will provide an excellent platform for IR observations. Our imaging and spectroscopy experiment will show the distribution and intensity of IR forbidden lines in the solar corona.

  6. Apodized Pupil Lyot Coronagraphs designs for future segmented space telescopes

    Science.gov (United States)

    St. Laurent, Kathryn; Fogarty, Kevin; Zimmerman, Neil; N’Diaye, Mamadou; Stark, Chris; Sivaramakrishnan, Anand; Pueyo, Laurent; Vanderbei, Robert; Soummer, Remi

    2018-01-01

    A coronagraphic starlight suppression system situated on a future flagship space observatory offers a promising avenue to image Earth-like exoplanets and search for biomarkers in their atmospheric spectra. One NASA mission concept that could serve as the platform to realize this scientific breakthrough is the Large UV/Optical/IR Surveyor (LUVOIR). Such a mission would also address a broad range of topics in astrophysics with a multi-wavelength suite of instruments.In support of the community’s assessment of the scientific capability of a LUVOIR mission, the Exoplanet Exploration Program (ExEP) has launched a multi-team technical study: Segmented Coronagraph Design and Analysis (SCDA). The goal of this study is to develop viable coronagraph instrument concepts for a LUVOIR-type mission. Results of the SCDA effort will directly inform the mission concept evaluation being carried out by the LUVOIR Science and Technology Definition Team. The apodized pupil Lyot coronagraph (APLC) is one of several coronagraph design families that the SCDA study is assessing. The APLC is a Lyot-style coronagraph that suppresses starlight through a series of amplitude operations on the on-axis field. Given a suite of seven plausible segmented telescope apertures, we have developed an object-oriented software toolkit to automate the exploration of thousands of APLC design parameter combinations. In the course of exploring this parameter space we have established relationships between APLC throughput and telescope aperture geometry, Lyot stop, inner working angle, bandwidth, and contrast level. In parallel with the parameter space exploration, we have investigated several strategies to improve the robustness of APLC designs to fabrication and alignment errors and integrated a Design Reference Mission framework to evaluate designs with scientific yield metrics.

  7. Fully automated high-resolution spectroscopy at Swiss 1.2 m La Silla telescope

    Science.gov (United States)

    Weber, Luc; Blecha, Andre; Davignon, Geert; Maire, Charles; Queloz, Didier; Russiniello, Giovanni B.; Simond, Gilles

    2000-06-01

    A Ritchey-Chretien 1.2 m telescope (EULER) and the High- Resolution echelle Spectrograph (CORALIE), a new Swiss observing facility at ESO La Silla Observatory, are operational and since Summer 1998. The Observatory operation is fully automated and supports the unattended, attended and interactive mode of operation under local or remote control. The control hardware is based on Local Control Units (LCU) built from PC/RedHat Linux computers and a Unix Computing Server. The Operational Software is built around INTER, a command language interpreter featuring communication control, data access, image processing functions and easy access to external resources. The general SW architecture is a non-hierarchical tree of pairs made of hardware- independent interpreters running on the Observing Server and hardware dependent servers running on the LCU's. The Operational Software includes the full access (Creation/Modification/Retrieval) to the input/output databases, telescope, instrument and auxiliary set-up and control files as well as a full data-reduction pipeline. We describe briefly the system architecture, summarize the performances and the experience gained over 18 months of operation and we discuss some critical issues: use of standard components, parallel operation, real-time requirements, system upgrade and maintenance.

  8. A Micromegas-based telescope for muon tomography: The WatTo experiment

    Science.gov (United States)

    Bouteille, S.; Attié, D.; Baron, P.; Calvet, D.; Magnier, P.; Mandjavidze, I.; Procureur, S.; Riallot, M.; Winkler, M.

    2016-10-01

    This paper reports about the first Micromegas-based telescope built for applications in muon tomography. The telescope consists of four, 50×50 cm2 resistive multiplexed Micromegas with a 2D layout and a self-triggering electronics based on the Dream chip. Thanks to the multiplexing, the four detectors were readout with a single Front-End Unit. The high voltages were provided by a dedicated card using low consumption CAEN miniaturized modules. A nano-PC (Hummingboard) ensured the HV control and monitoring coupled with a temperature feedback as well as the data acquisition and storage. The overall consumption of the instrument yielded 30 W only, i.e. the equivalent of a standard bulb. The telescope was operated outside during 3.5 months to image the water tower of the CEA-Saclay research center, including a 1.5-month campaign with solar panels. The development of autonomous, low consumption muon telescopes with unprecedented accuracy opens new applications in imaging as well as in the field of muon metrology.

  9. A Micromegas-based telescope for muon tomography: The WatTo experiment

    Energy Technology Data Exchange (ETDEWEB)

    Bouteille, S. [CEA, Centre de Saclay, Irfu/SPhN, 91191 Gif sur Yvette (France); Attié, D.; Baron, P.; Calvet, D.; Magnier, P.; Mandjavidze, I. [CEA, Centre de Saclay, Irfu/Sedi, 91191 Gif sur Yvette (France); Procureur, S., E-mail: Sebastien.Procureur@cea.fr [CEA, Centre de Saclay, Irfu/SPhN, 91191 Gif sur Yvette (France); Riallot, M.; Winkler, M. [CEA, Centre de Saclay, Irfu/Sedi, 91191 Gif sur Yvette (France)

    2016-10-21

    This paper reports about the first Micromegas-based telescope built for applications in muon tomography. The telescope consists of four, 50×50 cm{sup 2} resistive multiplexed Micromegas with a 2D layout and a self-triggering electronics based on the Dream chip. Thanks to the multiplexing, the four detectors were readout with a single Front-End Unit. The high voltages were provided by a dedicated card using low consumption CAEN miniaturized modules. A nano-PC (Hummingboard) ensured the HV control and monitoring coupled with a temperature feedback as well as the data acquisition and storage. The overall consumption of the instrument yielded 30 W only, i.e. the equivalent of a standard bulb. The telescope was operated outside during 3.5 months to image the water tower of the CEA-Saclay research center, including a 1.5-month campaign with solar panels. The development of autonomous, low consumption muon telescopes with unprecedented accuracy opens new applications in imaging as well as in the field of muon metrology.

  10. Flagstaff Robotic Survey Telescope (FRoST): Rapid Response for NEOs

    Science.gov (United States)

    Avner, Louis Daniel; Trilling, David E.; Dunham, Edward W.

    2016-10-01

    The Flagstaff Robotic Survey Telescope (FRoST) is a robotic 0.6m Schmidt telescope that will be used for instant follow-up observations of newly discovered Near Earth Objects (NEOs). Here, we present the progress being made on FRoST as well as the remaining tasks until the telescope is fully operational. With more than one thousand NEOs being found yearly, more telescopes are needed to carry out follow-up observations. Most NEOs are found at their peak brightness, meaning that these observations need to happen quickly before they fade. By using the Catalina Sky Survey Queue Manager, FRoST will be able to accept interruptions during the night and prioritize observations automatically, allowing instant follow-up observations. FRoST will help refine the orbit of these newly discovered objects while providing optical colors. We will ingest information from the NEOCP and JPL's Scout program at five minute intervals and observe newly discovered targets robotically, process the data automatically, and autonomously generate astrometry and colors. We estimate that will we provide essentially 100% recovery of objects brighter than V~20. This work was supported by the NSF MRI program as well as by NAU and Lowell Observatory.

  11. Investigations into Generalization of Constraint-Based Scheduling Theories with Applications to Space Telescope Observation Scheduling

    Science.gov (United States)

    Muscettola, Nicola; Smith, Steven S.

    1996-09-01

    This final report summarizes research performed under NASA contract NCC 2-531 toward generalization of constraint-based scheduling theories and techniques for application to space telescope observation scheduling problems. Our work into theories and techniques for solution of this class of problems has led to the development of the Heuristic Scheduling Testbed System (HSTS), a software system for integrated planning and scheduling. Within HSTS, planning and scheduling are treated as two complementary aspects of the more general process of constructing a feasible set of behaviors of a target system. We have validated the HSTS approach by applying it to the generation of observation schedules for the Hubble Space Telescope. This report summarizes the HSTS framework and its application to the Hubble Space Telescope domain. First, the HSTS software architecture is described, indicating (1) how the structure and dynamics of a system is modeled in HSTS, (2) how schedules are represented at multiple levels of abstraction, and (3) the problem solving machinery that is provided. Next, the specific scheduler developed within this software architecture for detailed management of Hubble Space Telescope operations is presented. Finally, experimental performance results are given that confirm the utility and practicality of the approach.

  12. Using Telescopic Observations to Explore the Science of AGN with High School Students

    Science.gov (United States)

    McLin, K. M.; Cominsky, L. R.

    2010-12-01

    Over the past several years the NASA E/PO Group at Sonoma State University has operated a small robotic telescope in northern Sonoma County, California. The telescope is used by high school and college instructors and their students from around the United States. Observations have been used both in classroom settings and in after-school or extracurricular activities. It has also been central over the past two summers (2009/2010) as part of a summer science internship program for Sonoma County high school students. The program gave these students an in-depth experience collecting and analyzing astronomical data. This poster describes some of the ways that the telescope has been used to make scientific measurements (as opposed to “pretty pictures”) of astronomical phenomena in high school settings. Some of the obstacles to implementing a set of astronomical observations in the high school classroom will be described, as will the steps we have taken to overcome them. Information is provided on how instructors can become involved in using the telescope and what support is available to help them get started in their classes.

  13. A Fiber-Optic Coupled Telescope for Water Vapor DIAL Receivers

    Science.gov (United States)

    DeYoung, Russell J.; Lonn, Frederick

    1998-01-01

    A fiber-optic coupled telescope of low complexity was constructed and tested. The major loss mechanisms of the optical system have been characterized. Light collected by the receiver mirror is focused onto an optical fiber, and the output of the fiber is filtered by an interference filter and then focused onto an APD detector. This system was used in lidar field measurements with a 532-nm Nd:YAG laser beam. The results were encouraging. A numerical model used for calculation of the expected return signal agreed with the lidar return signal obtained. The assembled system was easy to align and operate and weighed about 8 kg for a 30 cm (12") mirror system. This weight is low enough to allow mounting of the fiber-optic telescope receiver system in a UAV. Furthermore, the good agreement between the numerical lidar model and the performance of the actual receiver system, suggests that this model may be used for estimation of the performance of this and other lidar systems in the future. Such telescopes are relatively easy to construct and align. The fiber optic cable allows easy placement of the optical detector in any position. These telescope systems should find widespread use in aircraft and space home DIAL water vapor receiver systems.

  14. An Overview of Integration and Test of the James Webb Space Telescope Integrated Science Instrument Module

    Science.gov (United States)

    Drury, Michael; Becker, Neil; Bos, Brent; Davila, Pamela; Frey, Bradley; Hylan, Jason; Marsh, James; McGuffey, Douglas; Novak, Maria; Ohl, Raymond; hide

    2007-01-01

    The James Webb Space Telescope (JWST) is a 6.6m diameter, segmented, deployable telescope for cryogenic IR space astronomy (approx.40K). The JWST Observatory architecture includes the Optical Telescope Element (OTE) and the Integrated Science Instrument Module (ISIM) element that contains four science instruments (SI) including a Guider. The SIs and Guider are mounted to a composite metering structure with outer dimensions of 2.1x2.2x1.9m. The SI and Guider units are integrated to the ISIM structure and optically tested at NASA/Goddard Space Flight Center as an instrument suite using a high-fidelity, cryogenic JWST telescope simulator that features a 1.5m diameter powered mirror. The SIs are integrated and aligned to the structure under ambient, clean room conditions. SI performance, including focus, pupil shear and wavefront error, is evaluated at the operating temperature. We present an overview of the ISIM integration within the context of Observatory-level construction. We describe the integration and verification plan for the ISIM element, including an overview of our incremental verification approach, ambient mechanical integration and test plans and optical alignment and cryogenic test plans. We describe key ground support equipment and facilities.

  15. Absolute energy calibration of the Telescope Array fluorescence detector with an electron linear accelerator

    Directory of Open Access Journals (Sweden)

    Shin B.K.

    2013-06-01

    Full Text Available The Electron Light Source(ELS is a new light source for the absolute energy calibration of cosmic ray Fluorescence Detector(FD telescopes. The ELS is a compact electron linear accelerator with a typical output of 109 electrons per pulse at 40 MeV. We fire the electron beam vertically into the air 100 m in front of the telescope. The electron beam excites the gases of the atmosphere in the same way as the charged particles of the cosmic ray induced extensive air shower. The gases give off the same light with the same wavelength dependence. The light passes through a small amount of atmosphere and is collected by the same mirror and camera with their wavelength dependence. In this way we can use the electron beam from ELS to make an end-to-end calibration of the telescope. In September 2010, we began operation of the ELS and the FD telescopes observed the fluorescence photons from the air shower which was generated by the electron beam. In this article, we will reort the status of analysis of the absolute energy calibration with data which was taken in September 2010, and beam monitor study in November 2011.

  16. The MIDAS telescope for microwave detection of ultra-high energy cosmic rays

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez-Muñiz, J. [Universidad de Santiago de Compostela, Departamento de Física de Partículas, Campus Sur, Universidad, E-15782 Santiago de Compostela (Spain); Amaral Soares, E. [Universidade Federal do Rio de Janeiro, Instituto de Física, Cidade Universitaria, Caixa Postal 68528, 21945-970 Rio de Janeiro, RJ (Brazil); Berlin, A.; Bogdan, M. [University of Chicago, Enrico Fermi Institute and Kavli Institute for Cosmological Physics, 5640 S. Ellis Ave., Chicago, IL 60637 (United States); Boháčová, M. [University of Chicago, Enrico Fermi Institute and Kavli Institute for Cosmological Physics, 5640 S. Ellis Ave., Chicago, IL 60637 (United States); Institute of Physics of the Academy of Sciences of the Czech Republic, Na Slovance 2, CZ-182 21 Praha 8 (Czech Republic); Bonifazi, C. [Universidade Federal do Rio de Janeiro, Instituto de Física, Cidade Universitaria, Caixa Postal 68528, 21945-970 Rio de Janeiro, RJ (Brazil); Carvalho, W.R. [Universidad de Santiago de Compostela, Departamento de Física de Partículas, Campus Sur, Universidad, E-15782 Santiago de Compostela (Spain); Mello Neto, J.R.T. de [Universidade Federal do Rio de Janeiro, Instituto de Física, Cidade Universitaria, Caixa Postal 68528, 21945-970 Rio de Janeiro, RJ (Brazil); Facal San Luis, P., E-mail: facal@kicp.uchicago.edu [University of Chicago, Enrico Fermi Institute and Kavli Institute for Cosmological Physics, 5640 S. Ellis Ave., Chicago, IL 60637 (United States); Genat, J.F.; Hollon, N.; Mills, E.; Monasor, M.; Privitera, P. [University of Chicago, Enrico Fermi Institute and Kavli Institute for Cosmological Physics, 5640 S. Ellis Ave., Chicago, IL 60637 (United States); and others

    2013-08-11

    We present the design, implementation and data taking performance of the MIcrowave Detection of Air Showers (MIDAS) experiment, a large field of view imaging telescope designed to detect microwave radiation from extensive air showers induced by ultra-high energy cosmic rays. This novel technique may bring a tenfold increase in detector duty cycle when compared to the standard fluorescence technique based on detection of ultraviolet photons. The MIDAS telescope consists of a 4.5 m diameter dish with a 53-pixel receiver camera, instrumented with feed horns operating in the commercial extended C-Band (3.4–4.2 GHz). A self-trigger capability is implemented in the digital electronics. The main objectives of this first prototype of the MIDAS telescope – to validate the telescope design, and to demonstrate a large detector duty cycle – were successfully accomplished in a dedicated data taking run at the University of Chicago campus prior to installation at the Pierre Auger Observatory. -- Highlights: • The MIDAS objective is to detect ultra high energy cosmic rays using microwaves. • GHz radiation could provide a powerful alternative to current detection methods. • The MIDAS prototype explores the potential of the microwave technique.

  17. Investigations into Generalization of Constraint-Based Scheduling Theories with Applications to Space Telescope Observation Scheduling

    Science.gov (United States)

    Muscettola, Nicola; Smith, Steven S.

    1996-01-01

    This final report summarizes research performed under NASA contract NCC 2-531 toward generalization of constraint-based scheduling theories and techniques for application to space telescope observation scheduling problems. Our work into theories and techniques for solution of this class of problems has led to the development of the Heuristic Scheduling Testbed System (HSTS), a software system for integrated planning and scheduling. Within HSTS, planning and scheduling are treated as two complementary aspects of the more general process of constructing a feasible set of behaviors of a target system. We have validated the HSTS approach by applying it to the generation of observation schedules for the Hubble Space Telescope. This report summarizes the HSTS framework and its application to the Hubble Space Telescope domain. First, the HSTS software architecture is described, indicating (1) how the structure and dynamics of a system is modeled in HSTS, (2) how schedules are represented at multiple levels of abstraction, and (3) the problem solving machinery that is provided. Next, the specific scheduler developed within this software architecture for detailed management of Hubble Space Telescope operations is presented. Finally, experimental performance results are given that confirm the utility and practicality of the approach.

  18. Towards a Multi-Variable Parametric Cost Model for Ground and Space Telescopes

    Science.gov (United States)

    Stahl, H. Philip; Henrichs, Todd

    2016-01-01

    Parametric cost models can be used by designers and project managers to perform relative cost comparisons between major architectural cost drivers and allow high-level design trades; enable cost-benefit analysis for technology development investment; and, provide a basis for estimating total project cost between related concepts. This paper hypothesizes a single model, based on published models and engineering intuition, for both ground and space telescopes: OTA Cost approximately (X) D(exp (1.75 +/- 0.05)) lambda(exp(-0.5 +/- 0.25) T(exp -0.25) e (exp (-0.04)Y). Specific findings include: space telescopes cost 50X to 100X more ground telescopes; diameter is the most important CER; cost is reduced by approximately 50% every 20 years (presumably because of technology advance and process improvements); and, for space telescopes, cost associated with wavelength performance is balanced by cost associated with operating temperature. Finally, duplication only reduces cost for the manufacture of identical systems (i.e. multiple aperture sparse arrays or interferometers). And, while duplication does reduce the cost of manufacturing the mirrors of segmented primary mirror, this cost savings does not appear to manifest itself in the final primary mirror assembly (presumably because the structure for a segmented mirror is more complicated than for a monolithic mirror).

  19. ESO Council Visits First VLT Unit Telescope Structure in Milan

    Science.gov (United States)

    1995-12-01

    important milestones in 1996. During the next two months, the mounting of the mechanical structure in Milan will be completed. Following this, a group of ESO hard- and software experts will spend about 6 months next to it, implementing and thoroughly testing all aspects of the very advanced VLT telescope control system. In the meantime, the erection of the first telescope enclosure at Paranal is rapidly proceeding and the outside panelling will soon be put in place. This work will be completed in January 1996, after which the integration of all inside mechanical components will follow. The take-over by ESO of the fully operational, first enclosure is scheduled for May 1996. The other enclosures will become ready at regular intervals thereafter. In Milan, all of the heavy parts of the second telescope structure have already been produced and the third and fourth are about 60 percent complete. While the first structure has now been pre-assembled for tests, the individual parts of the second will not be put together before they are shipped to Paranal in early 1996. Starting in June 1996, they will then be assembled inside the completed, first enclosure. Thus, the `second' structure will become the `first' VLT Unit telescope (UT1). This work will last until early 1997, after which the first 8.2-metre mirror will arrive from Europe and be installed. Finally, after another test and optimisation period, `first light' for UT1 is expected in late 1997. This procedure is very advantageous, because it allows to continue under less time pressure the extensive tests on the `first' structure in Milan until a satisfactory state of debugging and optimisation of the new VLT control system has been reached. In this way, the time necessary for the installation of this system in UT1 at Paranal in 1997 will be significantly shortened. In fact, the structure seen by the ESO Council in Milan will be the last to be shipped to Paranal where it will then become the fourth 8.2-metre Unit telescope

  20. A major electronics upgrade for the H.E.S.S. Cherenkov telescopes 1-4

    CERN Document Server

    Giavitto, G; Balzer, A.; Berge, D.; Brun, F.; Chaminade, T.; Delagnes, E.; Fontaine, G.; Füßling, M.; Giebels, B.; Glicenstein, J.F.; Gräber, T.; Hinton, J.A.; Jahnke, A.; Klepser, S.; Kossatz, M.; Kretzschmann, A.; Lefranc, V.; Leich, H.; Lüdecke, H.; Manigot, P.; Marandon, V.; Moulin, E.; de, M.; Nayman, P.; Penno, M.; Ross, D.; Salek, D.; Schade, M.; Schwab, T.; Simoni, R.; Stegmann, C.; Thornhill, J.; Toussenel, F.

    2015-01-01

    The High Energy Stereoscopic System (H.E.S.S.) is an array of imaging atmospheric Cherenkov telescopes (IACTs) located in the Khomas Highland in Namibia. It consists of four 12-m telescopes (CT1-4), which started operations in 2003, and a 28-m diameter one (CT5), which was brought online in 2012. It is the only IACT system featuring telescopes of different sizes, which provides sensitivity for gamma rays across a very wide energy range, from ~30 GeV up to ~100 TeV. Since the camera electronics of CT1-4 are much older than the one of CT5, an upgrade is being carried out; first deployment was in 2015, full operation is planned for 2016. The goals of this upgrade are threefold: reducing the dead time of the cameras, improving the overall performance of the array and reducing the system failure rate related to aging. Upon completion, the upgrade will assure the continuous operation of H.E.S.S. at its full sensitivity until and possibly beyond the advent of CTA. In the design of the new components, several CTA con...