WorldWideScience

Sample records for subantarctic fur seal

  1. Metagenomic Survey of Viral Diversity Obtained from Feces of Subantarctic and South American Fur Seals.

    Directory of Open Access Journals (Sweden)

    Mariana Kluge

    Full Text Available The Brazilian South coast seasonally hosts numerous marine species, observed particularly during winter months. Some animals, including fur seals, are found dead or debilitated along the shore and may harbor potential pathogens within their microbiota. In the present study, a metagenomic approach was performed to evaluate the viral diversity in feces of fur seals found deceased along the coast of the state of Rio Grande do Sul. The fecal virome of two fur seal species was characterized: the South American fur seal (Arctocephalus australis and the Subantarctic fur seal (Arctocephalus tropicalis. Fecal samples from 10 specimens (A. australis, n = 5; A. tropicalis, n = 5 were collected and viral particles were purified, extracted and amplified with a random PCR. The products were sequenced through Ion Torrent and Illumina platforms and assembled reads were submitted to BLASTx searches. Both viromes were dominated by bacteriophages and included a number of potentially novel virus genomes. Sequences of picobirnaviruses, picornaviruses and a hepevirus-like were identified in A. australis. A rotavirus related to group C, a novel member of the Sakobuvirus and a sapovirus very similar to California sea lion sapovirus 1 were found in A. tropicalis. Additionally, sequences of members of the Anelloviridae and Parvoviridae families were detected in both fur seal species. This is the first metagenomic study to screen the fecal virome of fur seals, contributing to a better understanding of the complexity of the viral community present in the intestinal microbiota of these animals.

  2. Time budgets and activity patterns of sub-Antarctic fur seals at ...

    African Journals Online (AJOL)

    1993-04-15

    Apr 15, 1993 ... tially influence the activity patterns of fur seals when they are ashore, and their relatively ... modified by cloud cover and shade (which advanced pro- gressively across the ..... Influence of climate on the distri- bution of walruses ...

  3. Physiological response to extreme fasting in subantarctic fur seal (Arctocephalus tropicalis) pups: metabolic rates, energy reserve utilization, and water fluxes.

    Science.gov (United States)

    Verrier, Delphine; Groscolas, René; Guinet, Christophe; Arnould, John P Y

    2009-11-01

    Surviving prolonged fasting requires various metabolic adaptations, such as energy and protein sparing, notably when animals are simultaneously engaged in energy-demanding processes such as growth. Due to the intermittent pattern of maternal attendance, subantarctic fur seal pups have to repeatedly endure exceptionally long fasting episodes throughout the 10-mo rearing period while preparing for nutritional independence. Their metabolic responses to natural prolonged fasting (33.4 +/- 3.3 days) were investigated at 7 mo of age. Within 4-6 fasting days, pups shifted into a stage of metabolic economy characterized by a minimal rate of body mass loss (0.7%/day) and decreased resting metabolic rate (5.9 +/- 0.1 ml O(2)xkg(-1)xday(-1)) that was only 10% above the level predicted for adult terrestrial mammals. Field metabolic rate (289 +/- 10 kJxkg(-1)xday(-1)) and water influx (7.9 +/- 0.9 mlxkg(-1)xday(-1)) were also among the lowest reported for any young otariid, suggesting minimized energy allocation to behavioral activity and thermoregulation. Furthermore, lean tissue degradation was dramatically reduced. High initial adiposity (>48%) and predominant reliance on lipid catabolism likely contributed to the exceptional degree of protein sparing attained. Blood chemistry supported these findings and suggested utilization of alternative fuels, such as beta-hydroxybutyrate and de novo synthesized glucose from fat-released glycerol. Regardless of sex and body condition, pups tended to adopt a convergent strategy of extreme energy and lean body mass conservation that appears highly adaptive for it allows some tissue growth during the repeated episodes of prolonged fasting they experience throughout their development.

  4. POPULATION NUMBERS OF FUR SEALS AT PRINCE EDWARD ...

    African Journals Online (AJOL)

    At a mean intrinsic rate of natural increase of 16.2% per year, Antarctic fur seals appear to be in the rapid recolonization phase of population growth. Breeding colonies of Subantarctic fur seals, largely found on the entire east coast, produced an estimated 15 000 pups, and the population had maintained a mean intrinsic ...

  5. Northern Fur Seal Food Habits

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains food habits samples, usually scats, collected opportunistically on northern fur seal rookeries and haulouts in Alaska from 1987 to present....

  6. A memory like a female Fur Seal: long-lasting recognition of pup's voice by mothers.

    Science.gov (United States)

    Mathevon, Nicolas; Charrier, Isabelle; Aubin, Thierry

    2004-06-01

    In colonial mammals like fur seals, mutual vocal recognition between mothers and their pup is of primary importance for breeding success. Females alternate feeding sea-trips with suckling periods on land, and when coming back from the ocean, they have to vocally find their offspring among numerous similar-looking pups. Young fur seals emit a 'mother-attraction call' that presents individual characteristics. In this paper, we review the perceptual process of pup's call recognition by Subantarctic Fur Seal Arctocephalus tropicalis mothers. To identify their progeny, females rely on the frequency modulation pattern and spectral features of this call. As the acoustic characteristics of a pup's call change throughout the lactation period due to the growing process, mothers have thus to refine their memorization of their pup's voice. Field experiments show that female Fur Seals are able to retain all the successive versions of their pup's call.

  7. leonina and Cape fur seals Arctocephalus pusillus

    African Journals Online (AJOL)

    cows or yearling/subadult individuals from size and ap- pearance. .... The penis was then everted and rubbed across the rump and hindflip- pers of the fur seal: successful intromission was never observed (Fig. 2H). Pelvic thrusts followed, and were timed on three ... the smaller size of A. p. pusillus cows (averaging 70 kg as.

  8. Treatment and prevention of infection following bites of the Antarctic fur seal (Arctocephalus gazella

    Directory of Open Access Journals (Sweden)

    Kouliev T

    2015-04-01

    Full Text Available Timur Kouliev,1 Victoria Cui2 1Beijing United Family Hospital, Beijing, People's Republic of China; 2Department of Biological Sciences, Columbia University, New York, NY, USA Abstract: In recent decades, an increasing number of people have traveled to sub-Antarctic and Antarctic regions each year for research, tourism, and resource exploitation. Hunting of Antarctic fur seals (Arctocephalus gazella almost pushed the species to extinction in the early 1900s, but populations have since shown rapid and substantial recovery. The species' range has re-expanded to include several islands south of the Antarctic Convergence, most notably South Georgia, and now overlaps with many popular Antarctic travel destinations. Both male and female fur seals can become extremely aggressive when provoked, and their bites, if not properly treated, pose a significant risk of infection by microorganisms not usually encountered in cases of animal bites. In this report, we present the case of a patient treated for a fur seal bite during an Antarctic expedition cruise, review the literature concerning seal bites, and suggest the use of antibiotic prophylaxis to prevent complications. Keywords: zoonotic, polar tourism, prophylaxis, seal finger, expedition medicine

  9. Northern fur seal pup weights, Pribilof Islands, Alaska, 1957-present

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This database contains northern fur seal pup mass and length data by date, island, rookery and sex on the Pribilof Islands, Alaska, collected between 1957-2012. Mass...

  10. Northern Fur Seal Captures and Tag Sightings Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset contains information regarding the capture, tagging and re-sighting of northern fur seals on the Pribilof Islands and Bogoslof Island, Alaska, from 1986...

  11. A vagrant subantarctic fur seal Arctocephalus tropicalis found in the ...

    African Journals Online (AJOL)

    1992-08-24

    Aug 24, 1992 ... S species in the south· ... Fish Gome 55: 330-331. ST AMANT.l.A . ... Fish Gam£ 59: 151-153. ... species are on temperate islands north 01 the Antarctic Polar. Front. .... This species was hunted to the verge of extinction in the.

  12. Endoparasites of the subantarctic fur seal Arctocephalus tropicalis ...

    African Journals Online (AJOL)

    1989-03-03

    Mar 3, 1989 ... 77°35'E) and Gough Island (40"20'S / 09°54'W) amongst others in the Southern Ocean, with vagrants from an unknown source turning up on the South. African coastline (Bester 1980; Shaughnessy & Ross. 1980; Hes & Roux 1983). Very little is known of the parasites of this species since only a few of the ...

  13. Dusky dolphins Lagenorhynchus obscurus and Cape fur seals ...

    African Journals Online (AJOL)

    The fatty acid composition of the blubber of five dusky dolphins Lagenorhynchus obscurus and five Cape fur seals Arctocephalus pusillus pusillus from the northern Benguela ecosystem (South-East Atlantic) and their main prey was determined. Differences in fatty acid composition of the inner and outer blubber layer of the ...

  14. Both the Antarctic fur seal Arctocephalus gazella and the ...

    African Journals Online (AJOL)

    spamer

    cause the pupping season continues into the second week of January (Kerley 1983b). On the open vegetated areas behind landing beaches, all fur seals were counted and classified. Pup numbers were derived from three sources: first, an estimate of the degree of polygyny. (2.4 pups per adult male) calculated for a Marion.

  15. Diet of Cape fur seals Arctocephalus pusillus pusillus at three ...

    African Journals Online (AJOL)

    The diet composition of Cape fur seals Arctocephalus pusillus pusillus was investigated from three breeding colonies in Namibia between January 1994 and April 2002 using scat analysis. Otolith numbers were corrected for those lost during digestion before determining the percentage numerical abundance of prey in each ...

  16. Aggressive behaviour of an adult male Cape fur seal ...

    African Journals Online (AJOL)

    This is a report of a marine predator (the white shark) being threatened by a member of the species on which it preys (a male Cape fur seal). Although these events may be rarely observed or occur infrequently, they may have important implications for the predator and its prey.We suggest that shark mobbing by adult male ...

  17. A memory like a female Fur Seal: long-lasting recognition of pup's voice by mothers

    Directory of Open Access Journals (Sweden)

    Nicolas Mathevon

    2004-06-01

    Full Text Available In colonial mammals like fur seals, mutual vocal recognition between mothers and their pup is of primary importance for breeding success. Females alternate feeding sea-trips with suckling periods on land, and when coming back from the ocean, they have to vocally find their offspring among numerous similar-looking pups. Young fur seals emit a 'mother-attraction call' that presents individual characteristics. In this paper, we review the perceptual process of pup's call recognition by Subantarctic Fur Seal Arctocephalus tropicalis mothers. To identify their progeny, females rely on the frequency modulation pattern and spectral features of this call. As the acoustic characteristics of a pup's call change throughout the lactation period due to the growing process, mothers have thus to refine their memorization of their pup's voice. Field experiments show that female Fur Seals are able to retain all the successive versions of their pup's call.Em mamíferos coloniais como as focas, o reconhecimento vocal mútuo entre as mães e seu filhote é de importância primordial para o sucesso reprodutivo. As fêmeas alternam viagens de alimentação no mar com períodos de amamentação em terra e, quando voltam à colônia, elas devem achar vocalmente seu filhote no meio de muitos outros visualmente semelhantes. As jovens focas emitem um ''grito de atração da mãe'' que apresenta características individuais. Examinamos aqui o processo perceptual do reconhecimento do grito do filhote pela mãe numa população sub-antártica da foca Arctocephalus tropicalis. Para identificar seu filhote as fêmeas se baseiam no padrão da freqüência de modulação e outras características espectrais deste grito. Como os parâmetros acústicos do grito de um filhote mudam ao longo do período de amamentação por causa do seu crescimento, as mães precisam de uma memorização refinada da voz de seu filhote. Experiências de campo mostram que as fêmeas desta espécie s

  18. Isolation and characterization of Campylobacter spp. from Antarctic fur seals (Arctocephalus gazella) at Deception Island, Antarctica.

    Science.gov (United States)

    García-Peña, F J; Pérez-Boto, D; Jiménez, C; San Miguel, E; Echeita, A; Rengifo-Herrera, C; García-Párraga, D; Ortega-Mora, L M; Pedraza-Díaz, S

    2010-09-01

    The presence of Campylobacter spp. was investigated in 41 Antarctic fur seals (Arctocephalus gazella) and 9 Weddell seals (Leptonychotes weddellii) at Deception Island, Antarctica. Infections were encountered in six Antarctic fur seals. The isolates, the first reported from marine mammals in the Antarctic region, were identified as Campylobacter insulaenigrae and Campylobacter lari.

  19. Epizootiology of Brucella infection in Australian fur seals.

    Science.gov (United States)

    Lynch, Michael; Duignan, Pádraig J; Taylor, Trevor; Nielsen, Ole; Kirkwood, Roger; Gibbens, John; Arnould, John P Y

    2011-04-01

    Novel members of the bacterial genus Brucella have recently emerged as pathogens of various marine mammal species and as potential zoonotic agents. We investigated the epizootiology of Brucella infection in Australian fur seals (Arctocephalus pusillus doriferus) by establishing demographic and temporal variations in antibody prevalence, attempting isolation of the causative agent, and determining whether this potential pathogen is involved in frequent abortions observed in this pinniped species. Two competitive enzyme-linked immunosorbent assays (cELISAs), an indirect ELISA, and a fluorescence polarization assay (FPA) were used to test sera for Brucella antibodies. The FPA and cELISA proved suitable for use in this species. Significant differences in antibody prevalence were found between age classes of seals sampled between 2007 and 2009 at one colony. Pups sampled at this site (n=134) were negative for Brucella antibodies by all serologic tests but 17 of 45 (38%) of juveniles were antibody-positive. Antibody prevalence in adult females was significantly higher than in juveniles (P=0.044). Antibody prevalence for adult females between 2003 and 2009 varied significantly over time (P=0.011), and for individuals sampled between 2003 and 2005, the likelihood of pregnancy was greater in individuals positive for Brucella antibodies (P=0.034). Inflammatory lesions suggestive of infectious agents were found in 14 of 39 aborted Australian fur seal pups, but pathologic changes were not uniformly consistent for Brucella infection. Culture and PCR investigations on fetal tissues were negative for Brucella. Culture and PCR on selected fresh or frozen tissues from 36 juvenile and adult animals were also negative. We suspect that the prevalence of active infection with Brucella in Australian fur seals is low relative to antibody prevalence.

  20. 76 FR 45499 - Marine Mammals; Subsistence Taking of Northern Fur Seals; Harvest Estimates

    Science.gov (United States)

    2011-07-29

    ... Statement is available on the Internet at the following address: http://alaskafisheries.noaa.gov... influences the need to take fur seals during the subsequent summer northern fur seal subsistence harvest....O.) 12866. The proposed actions are not likely to result in (1) an annual effect on the economy of...

  1. 75 FR 21243 - Marine Mammals; Subsistence Taking of Northern Fur Seals; St. George

    Science.gov (United States)

    2010-04-23

    ... Mammals; Subsistence Taking of Northern Fur Seals; St. George AGENCY: National Marine Fisheries Service... (APA). The Pribilof Island Community of St. George Island, Traditional Council (Council) petitioned... St. George Island to take male fur seal young of the year during the fall. NMFS solicits public...

  2. Uncinariasis in northern fur seal and California sea lion pups from California.

    Science.gov (United States)

    Lyons, E T; DeLong, R L; Melin, S R; Tolliver, S C

    1997-10-01

    Northern fur seal (Callorhinus ursinus) (n = 25) and California sea lion (Zalophus californianus) (n = 53) pups, found dead on rookeries on San Miguel Island (California, USA), were examined for adult Uncinaria spp. Prevalence of these nematodes was 96% in fur seal pups and 100% in sea lion pups. Mean intensity of Uncinaria spp. per infected pup was 643 in fur seals and 1,284 in sea lions. Eggs of Uncinaria spp. from dead sea lion pups underwent embryonation in an incubator; development to the free-living third stage larva occurred within the egg. This study provided some specific information on hookworm infections in northern fur seal and California sea lion pups on San Miguel Island. High prevalence rate of Uncinaria spp. in both species of pinnipeds was documented and much higher numbers (2X) of hookworms were present in sea lion than fur seal pups.

  3. Isotopic and genetic insights into the persistence of the northern fur seal (Callorhinus ursinus) (Invited)

    Science.gov (United States)

    Koch, P. L.; Hadly, E. A.; Pinsky, M. L.; Newsome, S. D.

    2010-12-01

    maintain high levels of genetic diversity even as it lost breeding colonies across its geographic range. Thus the behavioral differences suggested by isotopic analysis result from phenotypic plasticity rather than local adaptation, providing further survival strategies for the species. The detailed paleontological record available for northern fur seals offers an excellent opportunity to examine the genetic and behavioral diversity of a species within and among populations through time. We conclude that general species traits (panmixia, behavioral plasticity, broad geographic range, a secure refuge) can provide long-term resilience to overexploitation, climate change, and other stressors. For example, similar traits may have allowed southern elephant seals to colonize the Antarctic mainland during the middle Holocene, only to collapse back to sub-Antarctic islands with the onset of icy conditions in the latest Holocene. Overall, such knowledge will help to predict future ecosystem changes and to identify species that are most likely to benefit from management interventions such as assisted migration and translocation.

  4. Low Spatial Genetic Differentiation Associated with Rapid Recolonization in the New Zealand Fur Seal Arctocephalus forsteri.

    Science.gov (United States)

    Dussex, Nicolas; Robertson, Bruce C; Salis, Alexander T; Kalinin, Aleksandr; Best, Hugh; Gemmell, Neil J

    2016-01-01

    Population declines resulting from anthropogenic activities are of major consequence for the long-term survival of species because the resulting loss of genetic diversity can lead to extinction via the effects of inbreeding depression, fixation of deleterious mutations, and loss of adaptive potential. Otariid pinnipeds have been exploited commercially to near extinction with some species showing higher demographic resilience and recolonization potential than others. The New Zealand fur seal (NZFS) was heavily impacted by commercial sealing between the late 18th and early 19th centuries, but has recolonized its former range in southern Australia. The species has also recolonized its former range in New Zealand, yet little is known about the pattern of recolonization. Here, we first used 11 microsatellite markers (n = 383) to investigate the contemporary population structure and dispersal patterns in the NZFS (Arctocephalus forsteri). Secondly, we model postsealing recolonization with 1 additional mtDNA cytochrome b (n = 261) marker. Our data identified 3 genetic clusters: an Australian, a subantarctic, and a New Zealand one, with a weak and probably transient subdivision within the latter cluster. Demographic history scenarios supported a recolonization of the New Zealand coastline from remote west coast colonies, which is consistent with contemporary gene flow and with the species' high resilience. The present data suggest the management of distinct genetic units in the North and South of New Zealand along a genetic gradient. Assignment of individuals to their colony of origin was limited (32%) with the present data indicating the current microsatellite markers are unlikely sufficient to assign fisheries bycatch of NZFSs to colonies. © The American Genetic Association 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  5. Streptococcus phocae infections associated with starvation in Cape fur seals : case report

    Directory of Open Access Journals (Sweden)

    M.M. Henton

    1999-07-01

    Full Text Available Mortalities and abortions associated with starvation occurred at Cape Cross, Namibia, in Cape fur seals (Arctocephalus pusillus pusillus. Affected seals showed lethargy and emaciation, and the most common pathological signs were those of a respiratory infection, both in adults and offspring. Streptococcus phocae was isolated from adult seals, a cub and aborted foetuses.

  6. AFSC/NMML/CCEP: Northern fur seal demography at San Miguel Island, California, 1974 - 2014

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The National Marine Mammal Laboratories' California Current Ecosystem Program (AFSC/NOAA) initiated a long-term marking program of northern fur seals (Callorhinus...

  7. Alaska northern fur seal migration and foraging strategies telemetry and environmental data, 2009-2010

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set was used for the analysis of adult male and female northern fur seal winter migration and foraging behavior published by Sterling et al. (2014)....

  8. Alaska Northern Fur Seal Foraging Habitat Model Stable Isotope Data, 2006-2008

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data sets were used by Zeppelin et al. (2015) to model northern fur seal foraging habitats based on stable isotope values measured in plasma and red blood...

  9. Bilateral ocular anomalies in a South African fur seal (Arctocephalus pusillus pusillus)

    DEFF Research Database (Denmark)

    Colitz, Carmen M H; Rudnick, Jens-Christian; Heegaard, Steffen

    2013-01-01

    A female South African fur seal (Arctocephalus pusillus pusillus) began having obvious clinical ophthalmologic problems by 8 weeks of age. The initial clinical sign was diffuse corneal edema, which progressed to bullae formation and ulcers; the underlying cause of corneal edema and bullous...... keratopathy was not identified antemortem. An ophthalmological evaluation was performed when the fur seal was approximately 6 months of age, but due to the diffuse corneal edema, intraocular structures could not be easily evaluated. An underlying infectious etiology was suspected; therefore, appropriate...... diagnostics were pursued, but did not identify a cause. Initial improvement was noted, but the fur seal then became blind and eventually became very painful. Due to decreased quality of life and aggressive behavior, the fur seal was euthanized. Histopathological diagnoses were persistent tunica vasculosa...

  10. The behavioural response of Australian fur seals to motor boat noise.

    Directory of Open Access Journals (Sweden)

    Joy S Tripovich

    Full Text Available Australian fur seals breed on thirteen islands located in the Bass Strait, Australia. Land access to these islands is restricted, minimising human presence but boat access is still permissible with limitations on approach distances. Thirty-two controlled noise exposure experiments were conducted on breeding Australian fur seals to determine their behavioural response to controlled in-air motor boat noise on Kanowna Island (39°10'S, 146°18'E. Our results show there were significant differences in the seals' behaviour at low (64-70 dB versus high (75-85 dB sound levels, with seals orientating themselves towards or physically moving away from the louder boat noise at three different sound levels. Furthermore, seals responded more aggressively with one another and were more alert when they heard louder boat noise. Australian fur seals demonstrated plasticity in their vocal responses to boat noise with calls being significantly different between the various sound intensities and barks tending to get faster as the boat noise got louder. These results suggest that Australian fur seals on Kanowna Island show behavioural disturbance to high level boat noise. Consequently, it is recommended that an appropriate level of received boat sound emissions at breeding fur seal colonies be below 74 dB and that these findings be taken into account when evaluating appropriate approach distances and speed limits for boats.

  11. Fukushima derived radiocesium in subsistence-consumed northern fur seal and wild celery

    International Nuclear Information System (INIS)

    Ruedig, Elizabeth; Duncan, Colleen; Dickerson, Bobette; Williams, Michael; Gelatt, Thomas; Bell, Justin; Johnson, Thomas E.

    2016-01-01

    In July 2014, our investigative team traveled to St. Paul Island, Alaska to measure concentrations of radiocesium in wild-caught food products, primarily northern fur seal (Callorhinus ursinus). The 2011 Fukushima Daiichi Nuclear Power Plant accident released radiocesium into the atmosphere and into the western Pacific Ocean; other investigators have detected Fukushima-derived radionuclides in a variety of marine products harvested off the western coast of North America. We tested two subsistence-consumed food products from St. Paul Island, Alaska for Fukushima-derived radionuclides: 54 northern fur seal, and nine putchki (wild celery, Angelica lucida) plants. Individual northern fur seal samples were below minimum detectable activity concentrations of "1"3"7Cs and "1"3"4Cs, but when composited, northern fur seal tissues tested positive for trace quantities of both isotopes. Radiocesium was detected at an activity concentration of 37.2 mBq "1"3"4Cs kg"−"1 f.w. (95% CI: 35.9–38.5) and 141.2 mBq "1"3"7Cs kg"−"1 f.w. (95% CI: 135.5–146.8). The measured isotopic ratio, decay-corrected to the date of harvest, was 0.26 (95% CI: 0.25–0.28). The Fukushima nuclear accident released "1"3"4Cs and "1"3"7Cs in roughly equal quantities, but by the date of harvest in July 2014, this ratio was 0.2774, indicating that this population of seals has been exposed to small quantities of Fukushima-derived radiocesium. Activity concentrations of both "1"3"4Cs and "1"3"7Cs in putchki were below detection limits, even for composited samples. Northern fur seal is known to migrate between coastal Alaska and Japan and the trace "1"3"4Cs in northern fur seal tissue suggests that the population under study had been minimally exposed Fukushima-derived radionuclides. Despite this inference, the radionuclide quantities detected are small and no impact is expected as a result of the measured radiation exposure, either in northern fur seal or human populations consuming this species

  12. A colostrum trypsin inhibitor gene expressed in the Cape fur seal mammary gland during lactation.

    Science.gov (United States)

    Pharo, Elizabeth A; Cane, Kylie N; McCoey, Julia; Buckle, Ashley M; Oosthuizen, W H; Guinet, Christophe; Arnould, John P Y

    2016-03-01

    The colostrum trypsin inhibitor (CTI) gene and transcript were cloned from the Cape fur seal mammary gland and CTI identified by in silico analysis of the Pacific walrus and polar bear genomes (Order Carnivora), and in marine and terrestrial mammals of the Orders Cetartiodactyla (yak, whales, camel) and Perissodactyla (white rhinoceros). Unexpectedly, Weddell seal CTI was predicted to be a pseudogene. Cape fur seal CTI was expressed in the mammary gland of a pregnant multiparous seal, but not in a seal in its first pregnancy. While bovine CTI is expressed for 24-48 h postpartum (pp) and secreted in colostrum only, Cape fur seal CTI was detected for at least 2-3 months pp while the mother was suckling its young on-shore. Furthermore, CTI was expressed in the mammary gland of only one of the lactating seals that was foraging at-sea. The expression of β-casein (CSN2) and β-lactoglobulin II (LGB2), but not CTI in the second lactating seal foraging at-sea suggested that CTI may be intermittently expressed during lactation. Cape fur seal and walrus CTI encode putative small, secreted, N-glycosylated proteins with a single Kunitz/bovine pancreatic trypsin inhibitor (BPTI) domain indicative of serine protease inhibition. Mature Cape fur seal CTI shares 92% sequence identity with Pacific walrus CTI, but only 35% identity with BPTI. Structural homology modelling of Cape fur seal CTI and Pacific walrus trypsin based on the model of the second Kunitz domain of human tissue factor pathway inhibitor (TFPI) and porcine trypsin (Protein Data Bank: 1TFX) confirmed that CTI inhibits trypsin in a canonical fashion. Therefore, pinniped CTI may be critical for preventing the proteolytic degradation of immunoglobulins that are passively transferred from mother to young via colostrum and milk. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Prey and seasonal abundance of killer whales at sub-Antarctic ...

    African Journals Online (AJOL)

    The diet of killer whales Orcinus orca was investigated from 48 predation events observed during sightings at sub-Antarctic Marion Island between 2006 and 2009. From these events, there were 10 cases where prey could be identified. Killer whales fed on fur seals Arctocephalus tropicalis, elephant seals Mirounga leonina ...

  14. Do inter-colony differences in Cape fur seal foraging behaviour ...

    African Journals Online (AJOL)

    We investigated how such environmental variability may impact foraging behaviour of the Cape fur seal Arctocephalus pusillus pusillus, using satellite telemetry on animals in northern, central and southern Namibia. We expected that seal foraging behaviour would reflect a gradient of deteriorating feeding conditions from ...

  15. Perfluorinated contaminants in fur seal pups and penguin eggs from South Shetland, Antarctica.

    Science.gov (United States)

    Schiavone, A; Corsolini, S; Kannan, K; Tao, L; Trivelpiece, W; Torres, D; Focardi, S

    2009-06-01

    Perfluorinated compounds (PFCs) have emerged as a new class of global environmental pollutants. In this study, the presence of perfluorochemicals (PFCs) in penguin eggs and Antarctic fur seals was reported for the first time. Tissue samples from Antarctic fur seal pups and penguin eggs were collected during the 2003/04 breeding season. Ten PFC contaminants were determined in seal and penguin samples. The PFC concentrations in seal liver were in the decreasing order, PFOS>PFNA>PFHpA>PFUnDA while in Adélie penguin eggs were PFHpA>PFUnDA>PFDA>PFDoDA, and in Gentoo penguin eggs were PFUnDA>PFOS>PFDoDA>PFHpA. The PFC concentrations differed significantly between seals and penguins (ppenguins (ppenguin eggs of 0.3 ng/g and 0.38 ng/g wet wt, respectively. PFCs detected in penguin eggs and seal pups suggested oviparous and viviparous transfer of PFOS to eggs and off-springs.

  16. THE SHIFTING BASELINE OF NORTHERN FUR SEAL ECOLOGY IN THE NORTHEAST PACIFIC OCEAN

    Science.gov (United States)

    Historical data provide a baseline against which to judge the significance of recent ecological shifts and guide conservation strategies, especially for species decimated by pre-20th century harvesting. Northern fur seals (NFS; Callorhinus ursinus) are a common pinniped species i...

  17. Cephalopod diet of the Cape fur seal, Arctocephalus pusillus ...

    African Journals Online (AJOL)

    Sepia australis proved to be numerically the most important cephalopod in the diet of seals from Possession Island and Van Reenen Bay, while Octopus magnificus dominated at these colonies in terms of wet mass. Contrary to previous findings it is suggested that seals from Van Reenen Bay and Possession Island forage ...

  18. Relative population sizes and trends, and hybridization of fur seals ...

    African Journals Online (AJOL)

    of seals, therefore counts of adult males and immatures. (older than one year) were adjusted by 83070 and 29% respectively to compensate for known decreases to the date of the census. (e) Yearling seals were not present at the Islands during the censuses and were estimated from the previous year's pup production ...

  19. Alaska Northern Fur Seal Adult Female Satellite Telemetry and Oceanographic Data, 2002/03 and 2009/10

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set is comprised of data used for an analysis of the interactions between adult female northern fur seal migratory and foraging behavior and oceanographic...

  20. Time budgets and activity patterns of sub-Antarctic fur seals at ...

    African Journals Online (AJOL)

    ... location and distribution on site, and the prevailing weather conditions influence the pattern of interaction and allocation of time to the various activities in A. tropicalis. The predominance of inactivity is considered to be a behavioural thermoregulatory response to limit endogenous heat production as is energy conservation ...

  1. Isolation and characterization of Campylobacter jejuni subsp jejuni from macaroni penguins (Eudyptes chrysolophus) in the subantarctic region

    DEFF Research Database (Denmark)

    Broman, T.; Bergstrom, S.; On, Stephen L.W.

    2000-01-01

    On Bird Island, South Georgia, albatrosses (n = 140), penguins (n = 100), and fur seals (n = 206) were sampled for Campylobacter jejuni. C. jejuni subsp. jejuni was recovered from three macaroni penguins (Eudyptes chrysolophus). These isolates, the first reported for the subantarctic region, showed...

  2. Winter habitat predictions of a key Southern Ocean predator, the Antarctic fur seal (Arctocephalus gazella)

    Science.gov (United States)

    Arthur, Benjamin; Hindell, Mark; Bester, Marthan; De Bruyn, P. J. Nico; Trathan, Phil; Goebel, Michael; Lea, Mary-Anne

    2017-06-01

    Quantification of the physical and biological environmental factors that influence the spatial distribution of higher trophic species is central to inform management and develop ecosystem models, particularly in light of ocean changes. We used tracking data from 184 female Antarctic fur seals (Arctocephalus gazella) to develop habitat models for three breeding colonies for the poorly studied Southern Ocean winter period. Models were used to identify and predict the broadly important winter foraging habitat and to elucidate the environmental factors influencing these areas. Model predictions closely matched observations and several core areas of foraging habitat were identified for each colony, with notable areas of inter-colony overlap suggesting shared productive foraging grounds. Seals displayed clear choice of foraging habitat, travelling through areas of presumably poorer quality to access habitats that likely offer an energetic advantage in terms of prey intake. The relationships between environmental predictors and foraging habitat varied between colonies, with the principal predictors being wind speed, sea surface temperature, chlorophyll a concentration, bathymetry and distance to the colony. The availability of core foraging areas was not consistent throughout the winter period. The habitat models developed in this study not only reveal the core foraging habitats of Antarctic fur seals from multiple colonies, but can facilitate the hindcasting of historical foraging habitats as well as novel predictions of important habitat for other major colonies currently lacking information of the at-sea distribution of this major Southern Ocean consumer.

  3. Organohalogen Contaminants and Vitamins in Northern Fur Seals (Callorhinus ursinus) Collected During Subsistence Hunts in Alaska.

    Science.gov (United States)

    Reiner, Jessica L; Becker, Paul R; Gribble, Matthew O; Lynch, Jennifer M; Moors, Amanda J; Ness, Jennifer; Peterson, Danielle; Pugh, Rebecca S; Ragland, Tamika; Rimmer, Catherine; Rhoderick, Jody; Schantz, Michele M; Trevillian, Jennifer; Kucklick, John R

    2016-01-01

    During native subsistence hunts from 1987 to 2007, blubber and liver samples from 50 subadult male northern fur seals (Callorhinus ursinus) were collected on St. Paul Island, Alaska. Samples were analyzed for legacy persistent organic pollutants (POPs), recently phased-out/current-use POPs, and vitamins. The legacy POPs measured from blubber samples included polychlorinated biphenyl congeners, DDT (and its metabolites), chlorobenzenes, chlordanes, and mirex. Recently phased-out/current-use POPs included in the blubber analysis were the flame retardants, polybrominated diphenyl ethers, and hexabromocyclododecanes. The chemical surfactants, perfluorinated alkyl acids, and vitamins A and E were assessed in the liver samples. Overall, concentrations of legacy POPs are similar to levels seen in seal samples from other areas of the North Pacific Ocean and the Bering Sea. Statistically significant correlations were seen between compounds with similar functions (pesticides, flame retardants, vitamins). With sample collection spanning two decades, the temporal trends in the concentrations of POPs and vitamins were assessed. For these animals, the concentrations of the legacy POPs tend to decrease or stay the same with sampling year; however, the concentrations of the current-use POPs increased with sampling year. Vitamin concentrations tended to stay the same across the sampling years. With the population of northern fur seals from St. Paul Island on the decline, a detailed assessment of exposure to contaminants and the correlations with vitamins fills a critical gap for identifying potential population risk factors that might be associated with health effects.

  4. Foraging-Based Enrichment Promotes More Varied Behaviour in Captive Australian Fur Seals (Arctocephalus pusillus doriferus)

    Science.gov (United States)

    Hocking, David P.; Salverson, Marcia; Evans, Alistair R.

    2015-01-01

    During wild foraging, Australian fur seals (Arctocephalus pusillus doriferus) encounter many different types of prey in a wide range of scenarios, yet in captive environments they are typically provided with a narrower range of opportunities to display their full repertoire of behaviours. This study aimed to quantitatively explore the effect of foraging-based enrichment on the behaviour and activity patterns displayed by two captive Australian fur seals at Melbourne Zoo, Australia. Food was presented as a scatter in open water, in a free-floating ball device, or in a static box device, with each treatment separated by control trials with no enrichment. Both subjects spent more time interacting with the ball and static box devices than the scatter feed. The total time spent pattern swimming was reduced in the enrichment treatments compared to the controls, while the time spent performing random swimming behaviours increased. There was also a significant increase in the total number of bouts of behaviour performed in all three enrichment treatments compared to controls. Each enrichment method also promoted a different suit of foraging behaviours. Hence, rather than choosing one method, the most effective way to increase the diversity of foraging behaviours, while also increasing variation in general activity patterns, is to provide seals with a wide range of foraging scenarios where food is encountered in different ways. PMID:25946412

  5. Human consumption of a vagrant South American Fur Seal Arctocephalus australis (Carnivora: Otariidae in Brazil

    Directory of Open Access Journals (Sweden)

    S. Siciliano

    2016-04-01

    Full Text Available The South American Fur Seal Arctocephalus australis is one of the most widely distributed South American otariid species. In Brazil, during austral winter months specimens of A. australis are regularly found along the Rio Grande do Sul and Santa Catarina coasts. Occasionally, vagrants have been recorded along the southeastern coast but rarely moves north of Rio de Janeiro, at 23°S. On 01 May 2015, fishermen noticed in the surf zone an unidentified large animal in Ilhéus, Bahia, northeastern Brazil. Severely wounded, it was still alive when first spotted. Numerous shark bites were observed in the rostrum and flippers, the peduncle was severely lacerated and the intestines were protruding. The specimen was identified as an adult of South American Fur Seal based on the combination of the characteristic coloration of the pelage, head shape, body size, the relatively large eye size, and mainly due to the pronounced three cusped teeth in post canines. Fishermen decided to butcher the carcass and share the meat among their companions. The present record, however, is of special concern as human consumption South American Fur Seal seems to be unusual in Brazil. Pieces of meat were shared among fishermen. In addition, small pieces of blubber were used as bait in the local shark long-line fishery. Consumption of an injured and presumably weak marine mammal carcass points to an increasing risk of contact between potentially harmful viruses, bacteria and fungi and humans. This note represents an alert to public health specialists and wildlife authorities in Brazil. It calls the urgency of an outreach campaign advertising to the potential risks of ingesting bushmeat either from land or aquatic sources. 

  6. Mother Vocal Recognition in Antarctic Fur Seal Arctocephalus gazella Pups: A Two-Step Process.

    Directory of Open Access Journals (Sweden)

    Thierry Aubin

    Full Text Available In otariids, mother's recognition by pups is essential to their survival since females nurse exclusively their own young and can be very aggressive towards non-kin. Antarctic fur seal, Arctocephalus gazella, come ashore to breed and form dense colonies. During the 4-month lactation period, females alternate foraging trips at sea with suckling period ashore. On each return to the colony, females and pups first use vocalizations to find each other among several hundred conspecifics and olfaction is used as a final check. Such vocal identification has to be highly efficient. In this present study, we investigated the components of the individual vocal signature used by pups to identify their mothers by performing playback experiments on pups with synthetic signals. We thus tested the efficiency of this individual vocal signature by performing propagation tests and by testing pups at different playback distances. Pups use both amplitude and frequency modulations to identify their mother's voice, as well as the energy spectrum. Propagation tests showed that frequency modulations propagated reliably up to 64m, whereas amplitude modulations and spectral content greatly were highly degraded for distances over 8m. Playback on pups at different distances suggested that the individual identification is a two-step process: at long range, pups identified first the frequency modulation pattern of their mother's calls, and other components of the vocal signature at closer range. The individual vocal recognition system developed by Antarctic fur seals is well adapted to face the main constraint of finding kin in a crowd.

  7. Colony-level assessment of Brucella and Leptospira in the Guadalupe fur seal, Isla Guadalupe, Mexico.

    Science.gov (United States)

    Ziehl-Quirós, E Carolina; García-Aguilar, María C; Mellink, Eric

    2017-01-24

    The relatively small population size and restricted distribution of the Guadalupe fur seal Arctocephalus townsendi could make it highly vulnerable to infectious diseases. We performed a colony-level assessment in this species of the prevalence and presence of Brucella spp. and Leptospira spp., pathogenic bacteria that have been reported in several pinniped species worldwide. Forty-six serum samples were collected in 2014 from pups at Isla Guadalupe, the only place where the species effectively reproduces. Samples were tested for Brucella using 3 consecutive serological tests, and for Leptospira using the microscopic agglutination test. For each bacterium, a Bayesian approach was used to estimate prevalence to exposure, and an epidemiological model was used to test the null hypothesis that the bacterium was present in the colony. No serum sample tested positive for Brucella, and the statistical analyses concluded that the colony was bacterium-free with a 96.3% confidence level. However, a Brucella surveillance program would be highly recommendable. Twelve samples were positive (titers 1:50) to 1 or more serovars of Leptospira. The prevalence was calculated at 27.1% (95% credible interval: 15.6-40.3%), and the posterior analyses indicated that the colony was not Leptospira-free with a 100% confidence level. Serovars Icterohaemorrhagiae, Canicola, and Bratislava were detected, but only further research can unveil whether they affect the fur seal population.

  8. Vasculitis and Thrombosis due to the Sea Lion Lungworm, Parafilaroides decorus, in a Guadalupe Fur Seal ( Arctocephalus philippii townsendi).

    Science.gov (United States)

    Seguel, Mauricio; Nadler, Steven; Field, Cara; Duignan, Padraig

    2018-05-01

    A free-ranging, male, yearling Guadalupe fur seal ( Arctocephalus philippii townsendi) died due to multifocal verminous vasculitis with thrombosis and several embolic infarcts in liver, kidney, and brain. Nematodes extracted from lung blood vessels were identified as Parafilaroides decorus, a parasite normally found in alveoli of California sea lions ( Zalophus californianus).

  9. Effects of the presence of official-looking volunteers on harassment of New Zealand fur seals.

    Science.gov (United States)

    Acevedo-Gutiérrez, Alejandro; Acevedo, Lisa; Boren, Laura

    2011-06-01

    An increased number of tourists viewing animals in the wild have increased stress on these animals (hereafter wildlife). Many wildlife-viewing locations rely on voluntary compliance with posted regulations to protect animals from tourists because of the expense of employing on-site enforcement personnel. Voluntary compliance, however, is ineffective. The presence of official-looking volunteers may decrease the incidence of wildlife harassment by tourists. To test this possibility, we observed tourists interacting with 5- to 12-month-old New Zealand fur seals (Arctocephalus forsteri) at the popular Ohau Stream waterfall while in the absence or presence of a young woman in plain sight wearing a neon vest (i.e., observer) and when an observer was not present. We observed 254 tourist groups at the waterfall when young seals were present. The percentage of groups in which at least one person harassed (approached, touched, or threw objects) a young seal was two-thirds lower when the official-looking observer was present. Frequency of harassment was inversely related to observer presence. Programs in which volunteers work at tourist sites are popular in countries with high tourism rates, such as New Zealand. Our results show that a relatively inexpensive and effective tourism-management strategy may be to post such volunteers as observers at sites where tourists view wildlife. ©2010 Society for Conservation Biology.

  10. Chemical fingerprints encode mother–offspring similarity, colony membership, relatedness, and genetic quality in fur seals

    Science.gov (United States)

    Stoffel, Martin A.; Caspers, Barbara A.; Forcada, Jaume; Giannakara, Athina; Baier, Markus; Eberhart-Phillips, Luke; Müller, Caroline; Hoffman, Joseph I.

    2015-01-01

    Chemical communication underpins virtually all aspects of vertebrate social life, yet remains poorly understood because of its highly complex mechanistic basis. We therefore used chemical fingerprinting of skin swabs and genetic analysis to explore the chemical cues that may underlie mother–offspring recognition in colonially breeding Antarctic fur seals. By sampling mother–offspring pairs from two different colonies, using a variety of statistical approaches and genotyping a large panel of microsatellite loci, we show that colony membership, mother–offspring similarity, heterozygosity, and genetic relatedness are all chemically encoded. Moreover, chemical similarity between mothers and offspring reflects a combination of genetic and environmental influences, the former partly encoded by substances resembling known pheromones. Our findings reveal the diversity of information contained within chemical fingerprints and have implications for understanding mother–offspring communication, kin recognition, and mate choice. PMID:26261311

  11. Looking Without Landing—Using Remote Piloted Aircraft to Monitor Fur Seal Populations Without Disturbance

    Directory of Open Access Journals (Sweden)

    Rebecca R. McIntosh

    2018-06-01

    Full Text Available Technical advances in monitoring devices, specifically drones, are allowing managers and scientists to obtain quality information on ecosystem health with minimal disturbance to ecosystems and the wildlife they support. Temporal and spatial indicators of ecosystem health, such as population size and/or abundance estimates of marine mammals are the basis for our understanding and prediction of ecosystem change. This is critical for the achievement of conservation goals and sustainable natural resources use. Performing surveys to obtain abundance estimates can be logistically demanding and expensive particularly in offshore marine environments, and can cause significant disturbance to wildlife. These constraints may lead to sub-optimal monitoring programs that reduce the frequency and/or precision of surveys at the cost of data quality and confidence in the resulting analyses. Using Remote Piloted Aircraft (RPA can be a solution to this challenge. With appropriate testing and ethical consideration; for many situations, RPAs can perform surveys with increased frequency, higher data resolution and less disturbance than typical methods that involve people being present on the ground, thereby enabling more robust programs for monitoring. We demonstrate the process of testing images from RPAs for estimating the abundance of Australian fur seals (Arctocephalus pusillus doriferus at one of their largest colonies on Seal Rocks, Australia. Two sizes of multirotor (1,400 and 350 mm with different imaging equipment were tested at 40, 60, and 80 m altitude above sea level. We assessed wildlife disturbance levels and optimized a methodology for effective and economical monitoring of this site. We employed commercially available and open-source software for programming survey flights (Drone Deploy, image processing (Agisoft Photoscan and Autopano Giga, data collation and analyses (R and Python. An online portal “SealSpotter” was developed to facilitate data

  12. Coping with heat: function of the natal coat of cape fur seal (Arctocephalus Pusillus Pusillus pups in maintaining core body temperature.

    Directory of Open Access Journals (Sweden)

    Nicola Erdsack

    Full Text Available Cape fur seal (Arctocephalus pusillus pups spend the first weeks of life exclusively or mainly ashore. They are exposed to intense solar radiation and high temperatures for long time periods, which results in temperatures up to at least 80°C on their black natal coat. To test the hypothesis that the natal coat has a crucial function in coping with these extreme conditions, we investigated the insulating properties of the natal coat in six captive newborn Cape fur seals during the first 50 days after birth. The natal fur differs from the adult fur not only in colour, but also in density, structure, and water repellence. We measured temperature on the fur surface and within the fur, as well as skin and rectal temperature under varying environmental conditions, comparable to the species' habitat. Experiments were designed to not influence the spontaneous behaviour of the pups. Rectal temperature was constant as long as the pups stayed dry, even during long-lasting intense solar radiation for up to 3 h. Skin temperature remained close to rectal temperature as long as the fur was dry, while with wet fur, skin temperature was significantly reduced as well. Our results show that the natal coat provides an effective insulation against overheating. The severely reduced insulation of wet natal fur against cold supports the assumption that the natal fur is an adaptation to the pups' terrestrial phase of life.

  13. Northern fur seal demography studies at San Miguel Island, California conducted from 1975-10-07 to 2014-09-26 (NCEI Accession 0141240)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The National Marine Mammal Laboratories' California Current Ecosystem Program (AFSC/NOAA) initiated a long-term marking program of northern fur seals (Callorhinus...

  14. AFSC/NMML/CCEP: Hookworm Intensity of Infection in California sea lion and Northern Fur Seal Pups in California, 1996 through 2008

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — There are various causes of mortality for California sea lion (Zalophus californianus) and northern fur seal (Callorhinus ursinus) pups. This dataset contains...

  15. Prevalence of Hookworms, Uncinaria Lucasi (Ancylostomatidae, In Northern Fur Seals (Callorhinus Ursinus On St. Paul Island, Alaska

    Directory of Open Access Journals (Sweden)

    Lyons E.T.

    2014-07-01

    Full Text Available Prevalence of Hookworms, Uncinaria lucasi (Ancylostomatidae, in Northern Fur Seals (Callorhinus ursinus on St. Paul Island, Alaska. Lyons, E. T., Kuzmina, T. A., Carie, J. L., Tolliver, S. C., Spraker, T. R. — Review of main studies on biology and ecology of the hookworm Uncinaria lucasi Stiles, 1901 performed on St. Paul Island, Alaska, is presented. Current data on prevalence of adult hookworms parasitizing northern fur seals (NFS, Callorhinus ursinus Linnaeus, 1758, were obtained based on the examination of the intestines of dead NFS pups and subadult 3-4 year-old males in July and August of 2011-2013. In addition, blubber samples collected from subadult NFS males were examined for parasitic third stage hookworm larvae (L3. All current data were compared with previously published studies performed in 1950s-1960s. Current prevalence of U. lucasi in dead pups collected from Reef Rookery was 4.9 % in 2011, 0 % in 2012 and 10.5 % in 2013. This rookery has a rocky substrate. On sandy rookeries prevalence was up to 75 % on Morjovi Rookery and 50 % on Vostochni Rookery. Parasitic L3 were recovered in 2.5 % of subadult males examined in 2013. Decreasing prevalence of hookworm infection of dead pups and subadult males during the last several years follows the tremendous decline in the number of fur seals in the herd on St. Paul Island during last several decades.

  16. Brucella placentitis and seroprevalence in northern fur seals ( Callorhinus ursinus) of the Pribilof Islands, Alaska.

    Science.gov (United States)

    Duncan, Colleen G; Tiller, Rebekah; Mathis, Demetrius; Stoddard, Robyn; Kersh, Gilbert J; Dickerson, Bobette; Gelatt, Tom

    2014-07-01

    Brucella species infect a wide range of hosts with a broad spectrum of clinical manifestations. In mammals, one of the most significant consequences of Brucella infection is reproductive failure. There is evidence of Brucella exposure in many species of marine mammals, but the outcome of infection is often challenging to determine. The eastern Pacific stock of northern fur seals (NFSs, Callorhinus ursinus) has declined significantly, spawning research into potential causes for this trend, including investigation into reproductive health. The objective of the current study was to determine if NFSs on St. Paul Island, Alaska have evidence of Brucella exposure or infection. Archived DNA extracted from placentas ( n = 119) and serum ( n = 40) samples were available for testing by insertion sequence (IS) 711 polymerase chain reaction (PCR) and the Brucella microagglutination test (BMAT), respectively. As well, placental tissue was available for histologic examination. Six (5%) placentas were positive by PCR, and a single animal had severe placentitis. Multilocus variable number tandem repeat analysis profiles were highly clustered and closely related to other Brucella pinnipedialis isolates. A single animal was positive on BMAT, and 12 animals had titers within the borderline range; 1 borderline animal was positive by PCR on serum. The findings suggest that NFSs on the Pribilof Islands are exposed to Brucella and that the organism has the ability to cause severe placental disease. Given the population trend of the NFS, and the zoonotic nature of this pathogen, further investigation into the epidemiology of this disease is recommended.

  17. Marine debris ingestion by the South American Fur Seal from the Southwest Atlantic Ocean.

    Science.gov (United States)

    Denuncio, Pablo; Mandiola, María Agustina; Pérez Salles, Sofía Belén; Machado, Rodrigo; Ott, Paulo H; De Oliveira, Larissa Rosa; Rodriguez, Diego

    2017-09-15

    In this paper, we examined the ingestion of marine debris (MD) in South American fur seals (SAFS), Arctocephalus australis, found dead in coastal beaches of northern Argentina and southern Brazil. Seven percent of 133 SAFS analyzed presented marine debris in their stomach (n=10), with no differences between sampling countries (Brazil n=7, Argentina n=3) and sexes (female=3; male=6). However, significant differences were observed between ages classes, with MD exclusively present in stomach contents of young specimens. Plastics represents 90% of MD ingested by the SAFS, whereas regarding the source, fishery-related items (e.g. monofilament lines) were the main MD (70%), with a lesser proportion of packaging (e.g. pieces of bags). Low numbers but large size pieces of MD were found in each stomach affected. Negative effects on the individuals could not be fully evaluated. Therefore, the potential impacts of the marine debris to the SAFS deserve further elucidation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Temporal allocation of foraging effort in female Australian fur seals (Arctocephalus pusillus doriferus.

    Directory of Open Access Journals (Sweden)

    Andrew J Hoskins

    Full Text Available Across an individual's life, foraging decisions will be affected by multiple intrinsic and extrinsic drivers that act at differing timescales. This study aimed to assess how female Australian fur seals allocated foraging effort and the behavioural changes used to achieve this at three temporal scales: within a day, across a foraging trip and across the final six months of the lactation period. Foraging effort peaked during daylight hours (57% of time diving with lulls in activity just prior to and after daylight. Dive duration reduced across the day (196 s to 168 s but this was compensated for by an increase in the vertical travel rate (1500-1600 m·h(-1 and a reduction in postdive duration (111-90 s. This suggests physiological constraints (digestive costs or prey availability may be limiting mean dive durations as a day progresses. During short trips (2.9 d effort increased up to 2-3 d and then decreased. Dive duration decreased at the same rate in short and long trips, respectively, before stabilising (long trips between 4-5 d. Suggesting that the same processes (digestive costs or prey availability working at the daily scale may also be present across a trip. Across the lactation period, foraging effort, dive duration and vertical travel rate increased until August, before beginning to decrease. This suggests that as the nutritional demands of the suckling pup and developing foetus increase, female effort increases to accommodate this, providing insight into the potential constraints of maternal investment in this species.

  19. Reconstruction of historical changes in northern fur seal prey availability and diversity in the western North Pacific through individual-based analysis of dietary records

    Science.gov (United States)

    Kiyota, Masashi; Yonezaki, Shiroh

    2017-06-01

    We analyzed long-term dietary records of northern fur seals (Callorhinus ursinus) to reconstruct historical changes in prey availability and diversity in the western North Pacific off northeastern Japan. The nominal relationships between the occurrence frequencies of fishes or squids in fur seal stomachs and the sampling locations reflected the spatial heterogeneity of fish and squid distributions along the shelf-slope-offshore continuum off northeastern Japan, whereas changes in the temporal occurrence frequencies reflected mainly the migration and foraging patterns of the fur seals. The occurrence probabilities of fishes and squids in fur seal stomachs were standardized by using generalized linear models to compensate for sampling biases in space and time. The reconstructed historical trends revealed decadal shifts in relatively high prey abundance-from mackerels in the 1970s to Japanese sardine in the 1980s and myctophids/sparkling enope squids in the 1990s-that were related to decadal shifts in the oceanographic regime. The sequential increase in mackerel and Japanese sardine abundances coincided with the annual catch trends of commercial fisheries. The index of overall prey availability calculated from the standardized occurrence probabilities of fishes and squids in fur seal stomachs was fairly stable over the decades.

  20. Alaska northern fur seal adult male satellite telemetry data, 2009-2010

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set is comprised of satellite-linked telemetry data collected to investigate winter migration patterns and foraging strategies of adult male northern fur...

  1. Intestinal helminth fauna of the South American sea lion Otaria flavescens and fur seal Arctocephalus australis from northern Patagonia, Argentina.

    Science.gov (United States)

    Hernández-Orts, J S; Montero, F E; Juan-García, A; García, N A; Crespo, E A; Raga, J A; Aznar, F J

    2013-09-01

    We report on the intestinal helminth fauna of 56 South American sea lions, Otaria flavescens, and 5 South American fur seals, Arctocephalus australis, from northern Patagonia, Argentina. A total of 97,325 helminth specimens were collected from sea lions. Gravid individuals were represented by 6 species of parasites: 1 digenean (Ascocotyle (Ascocotyle) patagoniensis), 1 cestode (Diphyllobothrium spp.), 3 nematodes (Uncinaria hamiltoni, Contracaecum ogmorhini s.s., Pseudoterranova cattani) and 1 acanthocephalan (Corynosoma australe). In addition, third-stage larvae of 2 nematodes (Contracaecum sp. and Anisakis sp. type I) and 3 juvenile acanthocephalans (Andracantha sp., Profilicollis chasmagnathi and Corynosoma cetaceum) were also collected. Andracantha sp., C. ogmorhini s.s. and P. chasmagnathi represent new host records. A total of 1516 helminth specimens were collected from fur seals. Gravid individuals were represented by three species of parasites, namely, Diphyllobothrium spp., C. ogmorhini s.s. and C. australe. In addition, larvae of Contracaecum sp. and P. cattani, juveniles of C. cetaceum and immature cestodes (Tetrabothriidae gen. sp.) were also collected. Corynosoma australe was the most prevalent and abundant parasite in both hosts, accounting for >90% of all specimens. Sea lions and furs seals from northern Patagonia harbour the intestinal helminth communities that could be predicted for otariids, i.e. the combination of species of the genera Corynosoma, Diphyllobothrium, Pseudoterranova, Contracaecum and, in pups, Uncinaria. Additionally, both species of otariid are apparently unsuitable hosts (i.e. non-hosts) for as many as five parasite taxa. The inclusion or exclusion of these species affects estimation of species richness at both component community (11 versus 6 species in sea lions; 7 versus 3 species in fur seals) and infracommunity (mean: 3.1 versus 2.6 in sea lions; 2.2 versus 1.7 species) levels. Information about the reproductive status of

  2. Australian fur seals (Arctocephalus pusillus doriferus use raptorial biting and suction feeding when targeting prey in different foraging scenarios.

    Directory of Open Access Journals (Sweden)

    David P Hocking

    Full Text Available Foraging behaviours used by two female Australian fur seals (Arctocephalus pusillus doriferus were documented during controlled feeding trials. During these trials the seals were presented with prey either free-floating in open water or concealed within a mobile ball or a static box feeding device. When targeting free-floating prey both subjects primarily used raptorial biting in combination with suction, which was used to draw prey to within range of the teeth. When targeting prey concealed within either the mobile or static feeding device, the seals were able to use suction to draw out prey items that could not be reached by biting. Suction was followed by lateral water expulsion, where water drawn into the mouth along with the prey item was purged via the sides of the mouth. Vibrissae were used to explore the surface of the feeding devices, especially when locating the openings in which the prey items had been hidden. The mobile ball device was also manipulated by pushing it with the muzzle to knock out concealed prey, which was not possible when using the static feeding device. To knock prey out of this static device one seal used targeted bubble blowing, where a focused stream of bubbles was blown out of the nose into the openings in the device. Once captured in the jaws, prey items were manipulated and re-oriented using further mouth movements or chews so that they could be swallowed head first. While most items were swallowed whole underwater, some were instead taken to the surface and held in the teeth, while being vigorously shaken to break them into smaller pieces before swallowing. The behavioural flexibility displayed by Australian fur seals likely assists in capturing and consuming the extremely wide range of prey types that are targeted in the wild, during both benthic and epipelagic foraging.

  3. Kelp and dolphin gulls cause perineal wounds in South American fur seal pups (Arctocephalus australis) at Guafo Island, Chilean Patagonia.

    Science.gov (United States)

    Seguel, Mauricio; Muñoz, Francisco; Montalva, Felipe; Perez-Venegas, Diego; Pavés, Héctor; Gottdenker, Nicole

    2017-07-01

    During five reproductive seasons, we documented the presence, extent and origin of perineal wounds in South American fur seal pups ( Arctocephalus australis ) on Guafo Island, Northern Chilean Patagonia. The seasonal prevalence of perineal wounds ranged from 5 to 9%, and new cases were more common at the end of the breeding season (February), when pups were on average two months old and were actively expelling hookworms ( Uncinaria sp). Histologically, wounds corresponded to marked ulcerative lymphoplasmacytic and histiocytic dermatitis with granulation tissue and mixed bacterial colonies. In 2015 and 2017, kelp gulls ( Larus dominicanus ) and dolphin gulls ( Leucophaeus scoresbii ) were observed picking and wounding the perineal area of marked pups. This behaviour occurred more frequently after the pups' defecation, when sea gulls engaged in consumption of pups' faeces. The affected pups usually had moderate to marked hookworm infections along with bloody diarrhoea and anaemia. Pups with severe wounds (23% of affected animals) had swollen perineal areas and signs of secondary systemic bacterial infection. We propose that seagulls on Guafo Island have learned to consume remains of blood and parasites in the faeces of pups affected by hookworm infection, causing perineal wounds during this process. We conclude that this perineal wounding is an unintentional, occasional negative effect of an otherwise commensal gull-fur seal relationship.

  4. Hookworm intensity of infection in California sea lion and northern fur seal pups collected at haulouts/rookeries in California from 1996-07-17 to 2003-01-16 (NCEI Accession 0141164)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — There are various causes of mortality for California sea lion (Zalophus californianus) and northern fur seal (Callorhinus ursinus) pups. This dataset contains...

  5. Molecular and morphometric evidence for separate species of Uncinaria (Nematoda: Ancylostomatidae) in California sea lions and northern fur seals: hypothesis testing supplants verification.

    Science.gov (United States)

    Nadler, S A; Adams, B J; Lyons, E T; DeLong, R L; Melin, S R

    2000-10-01

    California sea lions (Zalophus californianus) and northern fur seals (Callorhinus ursinus) are each believed to host distinct hookworm species (Uncinaria spp.). However, a recent morphometric analysis suggested that a single species parasitizes multiple pinniped hosts, and that the observed differences are host-induced. To explore the systematics of these hookworms and test these competing hypotheses, we obtained nucleotide sequences of nuclear ribosomal DNA (D2/D3 28S, D18/D19 28S, and internal transcribed spacer [ITS] regions) from 20 individual hookworms parasitizing California sea lion and northern fur seal pups where their breeding grounds are sympatric. Five individuals from an allopatric population of California sea lions were also sampled for ITS-1 and D18/D19 28S sequences. The 28S D2/D3 sequences showed no diagnostic differences among hookworms sampled from individual sea lions and fur seals, whereas the 28S D18/D19 sequences had one derived (apomorphic) character demarcating hookworms from northern fur seals. ITS sequences were variable for 7 characters, with 4 derived (apomorphic) states in ITS-1 demarcating hookworms from California sea lions. Multivariate analysis of morphometric data also revealed significant differences between nematodes representing these 2 host-associated lineages. These results indicate that these hookworms represent 2 species that are not distributed indiscriminately between these host species, but instead exhibit host fidelity, evolving independently with each respective host species. This evolutionary approach to analyzing sequence data for species delimitation is contrasted with similarity-based methods that have been applied to numerous diagnostic studies of nematode parasites.

  6. Bleaching of melanin in the epidermis of South American fur seal and its application on enzyme immunohistochemistry

    Directory of Open Access Journals (Sweden)

    A.P. Silva

    2011-03-01

    Full Text Available The South American fur seal (Arctocephalus australis is an amphibious marine mammal distributed along the Atlantic and Pacific coasts of South America. The species is well adjusted to different habitats due to the morphology of its fin-like members and due to some adaptations in their integumentary system. Immunohistochemical studies are very important to evaluate the mechanisms of skin adaptation due the differential expression of the antigens present in the tissue depending of the region of the body surface. However, its strongly pigmented (melanin epidermis prevents the visualization of the immuno-histochemical chromogens markers. In this study a melanin bleaching method was developed aimed to allow the visualization of the chromogens without interfering in the antigen-antibody affinity for immunohistochemistry. The analysis of PCNA (proliferating cell nuclear antigen index in the epidermis of A. australis by immunohistochemistry with diaminobenzidine (DAB as chromogen was used to test the method. The bleaching of the melanin allowed to obtain the cell proliferation index in epidermis and to avoid false positive results without affecting the immunohistochemical results.

  7. Use of Anthropogenic Sea Floor Structures by Australian Fur Seals: Potential Positive Ecological Impacts of Marine Industrial Development?

    Science.gov (United States)

    Arnould, John P Y; Monk, Jacquomo; Ierodiaconou, Daniel; Hindell, Mark A; Semmens, Jayson; Hoskins, Andrew J; Costa, Daniel P; Abernathy, Kyler; Marshall, Greg J

    2015-01-01

    Human-induced changes to habitats can have deleterious effects on many species that occupy them. However, some species can adapt and even benefit from such modifications. Artificial reefs have long been used to provide habitat for invertebrate communities and promote local fish populations. With the increasing demand for energy resources within ocean systems, there has been an expansion of infrastructure in near-shore benthic environments which function as de facto artificial reefs. Little is known of their use by marine mammals. In this study, the influence of anthropogenic sea floor structures (pipelines, cable routes, wells and shipwrecks) on the foraging locations of 36 adult female Australian fur seals (Arctocephalus pusillus doriferus) was investigated. For 9 (25%) of the individuals, distance to anthropogenic sea floor structures was the most important factor in determining the location of intensive foraging activity. Whereas the influence of anthropogenic sea floor structures on foraging locations was not related to age and mass, it was positively related to flipper length/standard length (a factor which can affect manoeuvrability). A total of 26 (72%) individuals tracked with GPS were recorded spending time in the vicinity of structures (from 75% of the foraging trip duration) with pipelines and cable routes being the most frequented. No relationships were found between the amount of time spent frequenting anthropogenic structures and individual characteristics. More than a third (35%) of animals foraging near anthropogenic sea floor structures visited more than one type of structure. These results further highlight potentially beneficial ecological outcomes of marine industrial development.

  8. Dive characteristics can predict foraging success in Australian fur seals (Arctocephalus pusillus doriferus as validated by animal-borne video

    Directory of Open Access Journals (Sweden)

    Beth L. Volpov

    2016-03-01

    Full Text Available Dive characteristics and dive shape are often used to infer foraging success in pinnipeds. However, these inferences have not been directly validated in the field with video, and it remains unclear if this method can be applied to benthic foraging animals. This study assessed the ability of dive characteristics from time-depth recorders (TDR to predict attempted prey capture events (APC that were directly observed on animal-borne video in Australian fur seals (Arctocephalus pusillus doriferus, n=11. The most parsimonious model predicting the probability of a dive with ≥1 APC on video included only descent rate as a predictor variable. The majority (94% of the 389 total APC were successful, and the majority of the dives (68% contained at least one successful APC. The best model predicting these successful dives included descent rate as a predictor. Comparisons of the TDR model predictions to video yielded a maximum accuracy of 77.5% in classifying dives as either APC or non-APC or 77.1% in classifying dives as successful verses unsuccessful. Foraging intensity, measured as either total APC per dive or total successful APC per dive, was best predicted by bottom duration and ascent rate. The accuracy in predicting total APC per dive varied based on the number of APC per dive with maximum accuracy occurring at 1 APC for both total (54% and only successful APC (52%. Results from this study linking verified foraging dives to dive characteristics potentially opens the door to decades of historical TDR datasets across several otariid species.

  9. Use of Anthropogenic Sea Floor Structures by Australian Fur Seals: Potential Positive Ecological Impacts of Marine Industrial Development?

    Directory of Open Access Journals (Sweden)

    John P Y Arnould

    Full Text Available Human-induced changes to habitats can have deleterious effects on many species that occupy them. However, some species can adapt and even benefit from such modifications. Artificial reefs have long been used to provide habitat for invertebrate communities and promote local fish populations. With the increasing demand for energy resources within ocean systems, there has been an expansion of infrastructure in near-shore benthic environments which function as de facto artificial reefs. Little is known of their use by marine mammals. In this study, the influence of anthropogenic sea floor structures (pipelines, cable routes, wells and shipwrecks on the foraging locations of 36 adult female Australian fur seals (Arctocephalus pusillus doriferus was investigated. For 9 (25% of the individuals, distance to anthropogenic sea floor structures was the most important factor in determining the location of intensive foraging activity. Whereas the influence of anthropogenic sea floor structures on foraging locations was not related to age and mass, it was positively related to flipper length/standard length (a factor which can affect manoeuvrability. A total of 26 (72% individuals tracked with GPS were recorded spending time in the vicinity of structures (from 75% of the foraging trip duration with pipelines and cable routes being the most frequented. No relationships were found between the amount of time spent frequenting anthropogenic structures and individual characteristics. More than a third (35% of animals foraging near anthropogenic sea floor structures visited more than one type of structure. These results further highlight potentially beneficial ecological outcomes of marine industrial development.

  10. Current prevalence of adult Uncinaria spp. in northern fur seal (Callorhinus ursinus) and California sea lion (Zalophus californianus) pups on San Miguel Island, California, with notes on the biology of these hookworms.

    Science.gov (United States)

    Lyons, E T; Melin, S R; DeLong, R L; Orr, A J; Gulland, F M; Tolliver, S C

    2001-06-28

    A prevalence survey for hookworms (Uncinaria spp.) was done in northern fur seal (Callorhinus ursinus) and California sea lion (Zalophus californianus) pups on San Miguel Island, CA, in 2000. Intestines of dead pups were examined for adult hookworms in July. These parasites were found in 95% of 20 fur seal pups and 100% of 31 sea lion pups. The number of hookworms varied from 4 to 2142 (mean = 760) in fur seal pups and from 20 to 2634 (mean = 612) in sea lion pups. A direct relationship was evident between body condition and number of hookworms in the pups; that is, pups in poor condition had fewer hookworms than those in good condition. There was a decline in the number of hookworms in sea lion pups in 2000 compared to collections in 1996. Eggs of Uncinaria spp. were found in rectal feces (collected in late September and early October) of none of 35 (0%) live fur seal pups and 41 of 48 (85%) live sea lion pups. Packed cell volume values, determined for most of the same live pups, were essentially normal for C. ursinus but were much lower than normal for most Z. californianus. Hookworm larvae were not found in blubber of fur seal and sea lion pups or in rookery sand in July. Rookery sand, positive for live hookworm larvae when put in a refrigerator, was negative at removal 2.5 years later. The average number of eggs in utero of female hookworms was 285 for three specimens from a fur seal pup and 281 from three specimens from a sea lion pup. One hookworm larva was recovered from milk stripped from the teats of a stranded Z. californianus female at The Marine Mammal Center, Sausalito, CA.

  11. The seasonal evolution of shelf water masses around Bouvetøya, a sub-Antarctic island in the mid-Atlantic sector of the Southern Ocean, determined from an instrumented southern elephant seal

    Directory of Open Access Journals (Sweden)

    Andrew D. Lowther

    2016-10-01

    Full Text Available Our study makes use of a fortuitous oceanographic data set collected around the remote sub-Antarctic island of Bouvetøya by a conductivity–temperature–depth recorder (CTD integrated with a satellite-relayed data logger deployed on an adult female southern elephant seal (Mirounga leonina to describe the seasonal evolution of the western shelf waters. The instrumented seal remained in waters over the shelf for 259 days, collecting an average of 2.6 (±0.06 CTD profiles per day, providing hydrographic data encompassing the late austral summer and the entire winter. These data document the thermal stratification of the upper water layer due to summer surface heating of the previous year's Antarctic Surface Water, giving way to a cold subsurface layer at about 100 m as the austral winter progressed, with a concomitant increase in salinity of the upper layer. Upper Circumpolar Deep Water was detected at a depth of approximately 200 m along the western shelf of Bouvetøya throughout the year. These oceanographic data represent the only seasonal time series for this region and the second such animal–instrument oceanographic time series in the sub-Antarctic domain of the Southern Ocean.

  12. Fortuitous encounters between seagliders and adult female northern fur seals (Callorhinus ursinus) off the Washington (USA) coast: upper ocean variability and links to top predator behavior.

    Science.gov (United States)

    Pelland, Noel A; Sterling, Jeremy T; Lea, Mary-Anne; Bond, Nicholas A; Ream, Rolf R; Lee, Craig M; Eriksen, Charles C

    2014-01-01

    Behavioral responses by top marine predators to oceanographic features such as eddies, river plumes, storms, and coastal topography suggest that biophysical interactions in these zones affect predators' prey, foraging behaviors, and potentially fitness. However, examining these pathways is challenged by the obstacles inherent in obtaining simultaneous observations of surface and subsurface environmental fields and predator behavior. In this study, migratory movements and, in some cases, diving behavior of 40 adult female northern fur seals (NFS; Callorhinus ursinus) were quantified across their range and compared to remotely-sensed environmental data in the Gulf of Alaska and California Current ecosystems, with a particular focus off the coast of Washington State (USA)--a known foraging ground for adult female NFS and where autonomous glider sampling allowed opportunistic comparison of seal behavior to subsurface biophysical measurements. The results show that in these ecosystems, adult female habitat utilization was concentrated near prominent coastal topographic, riverine, or inlet features and within 200 km of the continental shelf break. Seal dive depths, in most ecosystems, were moderated by surface light level (solar or lunar), mirroring known behaviors of diel vertically-migrating prey. However, seal dives differed in the California Current ecosystem due to a shift to more daytime diving concentrated at or below the surface mixed layer base. Seal movement models indicate behavioral responses to season, ecosystem, and surface wind speeds; individuals also responded to mesoscale eddies, jets, and the Columbia River plume. Foraging within small scale surface features is consistent with utilization of the inner coastal transition zone and habitats near coastal capes, which are known eddy and filament generation sites. These results contribute to our knowledge of NFS migratory patterns by demonstrating surface and subsurface behavioral responses to a spatially

  13. Fortuitous encounters between seagliders and adult female northern fur seals (Callorhinus ursinus off the Washington (USA coast: upper ocean variability and links to top predator behavior.

    Directory of Open Access Journals (Sweden)

    Noel A Pelland

    Full Text Available Behavioral responses by top marine predators to oceanographic features such as eddies, river plumes, storms, and coastal topography suggest that biophysical interactions in these zones affect predators' prey, foraging behaviors, and potentially fitness. However, examining these pathways is challenged by the obstacles inherent in obtaining simultaneous observations of surface and subsurface environmental fields and predator behavior. In this study, migratory movements and, in some cases, diving behavior of 40 adult female northern fur seals (NFS; Callorhinus ursinus were quantified across their range and compared to remotely-sensed environmental data in the Gulf of Alaska and California Current ecosystems, with a particular focus off the coast of Washington State (USA--a known foraging ground for adult female NFS and where autonomous glider sampling allowed opportunistic comparison of seal behavior to subsurface biophysical measurements. The results show that in these ecosystems, adult female habitat utilization was concentrated near prominent coastal topographic, riverine, or inlet features and within 200 km of the continental shelf break. Seal dive depths, in most ecosystems, were moderated by surface light level (solar or lunar, mirroring known behaviors of diel vertically-migrating prey. However, seal dives differed in the California Current ecosystem due to a shift to more daytime diving concentrated at or below the surface mixed layer base. Seal movement models indicate behavioral responses to season, ecosystem, and surface wind speeds; individuals also responded to mesoscale eddies, jets, and the Columbia River plume. Foraging within small scale surface features is consistent with utilization of the inner coastal transition zone and habitats near coastal capes, which are known eddy and filament generation sites. These results contribute to our knowledge of NFS migratory patterns by demonstrating surface and subsurface behavioral responses

  14. Thoracic auscultation in captive bottlenose dolphins (Tursiops truncatus), California sea lions (Zalophus californianus), and South African fur seals (Arctocephalus pusillus) with an electronic stethoscope.

    Science.gov (United States)

    Scharpegge, Julia; Hartmann, Manuel García; Eulenberger, Klaus

    2012-06-01

    Thoracic auscultation is an important diagnostic method used in cases of suspected pulmonary disease in many species, as respiratory sounds contain significant information on the physiology and pathology of the lungs and upper airways. Respiratory diseases are frequent in marine mammals and are often listed as one of their main causes of death. The aim of this study was to investigate and report baseline parameters for the electronic-mediated thoracic auscultation of one cetacean species and two pinniped species in captivity. Respiratory sounds from 20 captive bottlenose dolphins (Tursiops truncatus), 6 California sea lions (Zalophus californianus), and 5 South African fur seals (Arctocephalus pusillus) were recorded with an electronic stethoscope. The sounds were analyzed for duration of the respiratory cycle, adventitious sounds, and peak frequencies of recorded sounds during expiration and inspiration as well as for sound intensity as reflected by waveform amplitude during the respiratory cycle. In respiratory cycles of the bottlenose dolphins' expiring "on command," the duration of the expiration was significantly shorter than the duration of the inspiration. In the examined pinnipeds of this study, there was no clear pattern concerning the duration of one breathing phase: Adventitious sounds were detected most often in bottlenose dolphins that were expiring on command and could be compared with "forced expiratory wheezes" in humans. This is the first report of forced expiratory wheezes in bottlenose dolphins; they can easily be misinterpreted as pathologic respiratory sounds. The peak frequencies of the respiratory sounds reached over 2,000 Hz in bottlenose dolphins and over 1,000 Hz in California sea lions and South African fur seals, but the variation of the frequency spectra was very high in all animals. To the authors' knowledge, this is the first systematic analysis of respiratory sounds of bottlenose dolphins and two species of pinnipeds.

  15. Investigations of peritoneal and intestinal infections of adult hookworms (Uncinaria spp.) in northern fur seal (Callorhinus ursinus) and California sea lion (Zalophus californianus) pups on San Miguel Island, California (2003).

    Science.gov (United States)

    Lyons, Eugene T; Delong, R L; Nadler, S A; Laake, J L; Orr, A J; Delong, B L; Pagan, C

    2011-09-01

    The peritoneal cavity (PNC) and intestine of northern fur seal (Callorhinus ursinus) pups and California sea lion (Zalophus californianus) pups that died in late July and early August, 2003, on San Miguel Island, California, were examined for hookworms. Prevalence and morphometric studies were done with the hookworms in addition to molecular characterization. Based on this and previous molecular studies, hookworms from fur seals are designated as Uncinaria lucasi and the species from sea lions as Uncinaria species A. Adult hookworms were found in the PNC of 35 of 57 (61.4%) fur seal pups and of 13 of 104 (12.5%) sea lion pups. The number of hookworms located in the PNC ranged from 1 to 33 (median = 3) for the infected fur seal pups and 1 to 16 (median = 2) for the infected sea lion pups. In addition to the PNC, intestines of 43 fur seal and 32 sea lion pups were examined. All of these pups were positive for adult hookworms. The worms were counted from all but one of the sea lion pups. Numbers of these parasites in the intestine varied from 3 to 2,344 (median = 931) for the fur seal pups and 39 to 2,766 (median = 643) for the sea lion pups. Sea lion pups with peritoneal infections had higher intensity infections in the intestines than did pups without peritoneal infections, lending some support for the hypothesis that peritoneal infections result from high-intensity infections of adult worms. There was no difference in intestinal infection intensities between fur seal pups with and without peritoneal infections. Female adult hookworms in the intestines of both host species were significantly larger than males, and sea lion hookworms were larger than those in fur seals. Worms in the intestine also were larger than worms found in the PNC. Gene sequencing and (RFLP) analysis of (PCR) amplified (ITS) ribosomal DNA were used to diagnose the species of 172 hookworms recovered from the PNC and intestine of 18 C. ursinus and seven Z. californianus hosts

  16. Comparative biology of Uncinaria spp. in the California sea lion (Zalophus californianus) and the northern fur seal (Callorhinus ursinus) in California.

    Science.gov (United States)

    Lyons, E T; DeLong, R L; Gulland, F M; Melin, S R; Tolliver, S C; Spraker, T R

    2000-12-01

    Studies on several aspects of the life cycle of hookworms (Uncinaria spp.) in the California sea lion (Zalophus californianus) and northern fur seal (Callorhinus ursinus) were conducted on material collected on San Miguel Island (SMI), California and at The Marine Mammal Center, Sausalito, California in 1997, 1998, and 1999. Examination of Z. californianus intestines for adult hookworms and feces for eggs revealed that longevity of these parasites in pups is about 6-8 mo, and infections are probably not present in older sea lions. Parasitic third-stage larvae (L3) were recovered from the ventral abdominal tissue of Z. californianus, suggesting transmammary transmission. Callorhinus ursinus pups had no hookworm eggs in their feces or adult worms (except for 1 probable contaminant) in their intestines in the fall and early winter, revealing that adult Uncinaria spp. are spontaneously lost at <3 mo of age of the pups. Sand samples from rookeries, used by both Z. californianus and C. ursinus, on SMI were negative for free-living, L3 in summer months but positive in fall and winter months, indicating seasonality occurred.

  17. The sun, moon, wind, and biological imperative-shaping contrasting wintertime migration and foraging strategies of adult male and female northern fur seals (Callorhinus ursinus.

    Directory of Open Access Journals (Sweden)

    Jeremy T Sterling

    Full Text Available Adult male and female northern fur seals (Callorhinus ursinus are sexually segregated in different regions of the North Pacific Ocean and Bering Sea during their winter migration. Explanations for this involve interplay between physiology, predator-prey dynamics, and ecosystem characteristics, however possible mechanisms lack empirical support. To investigate factors influencing the winter ecology of both sexes, we deployed five satellite-linked conductivity, temperature, and depth data loggers on adult males, and six satellite-linked depth data loggers and four satellite transmitters on adult females from St. Paul Island (Bering Sea, Alaska, USA in October 2009. Males and females migrated to different regions of the North Pacific Ocean: males wintered in the Bering Sea and northern North Pacific Ocean, while females migrated to the Gulf of Alaska and California Current. Horizontal and vertical movement behaviors of both sexes were influenced by wind speed, season, light (sun and moon, and the ecosystem they occupied, although the expression of the behaviors differed between sexes. Male dive depths were aligned with the depth of the mixed layer during daylight periods and we suspect this was the case for females upon their arrival to the California Current. We suggest that females, because of their smaller size and physiological limitations, must avoid severe winters typical of the northern North Pacific Ocean and Bering Sea and migrate long distances to areas of more benign environmental conditions and where prey is shallower and more accessible. In contrast, males can better tolerate often extreme winter ocean conditions and exploit prey at depth because of their greater size and physiological capabilities. We believe these contrasting winter behaviors 1 are a consequence of evolutionary selection for large size in males, important to the acquisition and defense of territories against rivals during the breeding season, and 2 ease environmental

  18. The Sun, Moon, Wind, and Biological Imperative–Shaping Contrasting Wintertime Migration and Foraging Strategies of Adult Male and Female Northern Fur Seals (Callorhinus ursinus)

    Science.gov (United States)

    Sterling, Jeremy T; Springer, Alan M.; Iverson, Sara J.; Johnson, Shawn P.; Pelland, Noel A.; Johnson, Devin S.; Lea, Mary-Anne; Bond, Nicholas A.

    2014-01-01

    Adult male and female northern fur seals (Callorhinus ursinus) are sexually segregated in different regions of the North Pacific Ocean and Bering Sea during their winter migration. Explanations for this involve interplay between physiology, predator-prey dynamics, and ecosystem characteristics, however possible mechanisms lack empirical support. To investigate factors influencing the winter ecology of both sexes, we deployed five satellite-linked conductivity, temperature, and depth data loggers on adult males, and six satellite-linked depth data loggers and four satellite transmitters on adult females from St. Paul Island (Bering Sea, Alaska, USA) in October 2009. Males and females migrated to different regions of the North Pacific Ocean: males wintered in the Bering Sea and northern North Pacific Ocean, while females migrated to the Gulf of Alaska and California Current. Horizontal and vertical movement behaviors of both sexes were influenced by wind speed, season, light (sun and moon), and the ecosystem they occupied, although the expression of the behaviors differed between sexes. Male dive depths were aligned with the depth of the mixed layer during daylight periods and we suspect this was the case for females upon their arrival to the California Current. We suggest that females, because of their smaller size and physiological limitations, must avoid severe winters typical of the northern North Pacific Ocean and Bering Sea and migrate long distances to areas of more benign environmental conditions and where prey is shallower and more accessible. In contrast, males can better tolerate often extreme winter ocean conditions and exploit prey at depth because of their greater size and physiological capabilities. We believe these contrasting winter behaviors 1) are a consequence of evolutionary selection for large size in males, important to the acquisition and defense of territories against rivals during the breeding season, and 2) ease environmental

  19. Skull morphometrics of adult male Antartic fur seal, Arctocephalus gazella, and South American fur seal A. australis Morfometría craneana comparada de ejemplares machos adultos de lobo fino antártico, Arctocephalus gazella y lobo fino sudamericano, A. australis

    Directory of Open Access Journals (Sweden)

    Gustavo A. Daneri

    2005-09-01

    Full Text Available The skull morphometrics of adult male Antarctic fur seal, Arctocephalus gazella (Peters, 1875 and South American fur seal, A. australis (Zimmermann, 1783 were investigated using a collection of 45 and 38 skulls, respectively. Eighteen measurements were taken for each specimen. Comparative univariate and multivariate statistical analyses included standard statistics, one-way analysis of variance, principal component analysis and discriminant analysis. Individual variation was relatively high for some variables, as expressed by the coefficient of variation. Skulls of A. gazella were larger than those of A. australis for all but two variables: squamosal jugal suture and rostral length. Both species differed significantly as shown by both univariate and multivariate analyses. The discriminant function correctly classified all specimens. The standardized canonical coefficients showed that the variables which most contribute to the differentiation between species were, in decreasing order, the rostral length, palatal length, palatal width at postcanine 5 and braincase width. The present study corroborates that A. gazella and A. australis are phenotipically distinct species.Se estudió la morfometría craneana de especímenes machos adultos de lobo fino Antártico, Arctocephalus gazella (Peters, 1875 y lobo fino sudamericano, A. australis (Zimmermann, 1783, consultando una colección de 45 y 38 cráneos respectivamente. Para cada ejemplar se tomó un total de 18 medidas. El análisis comparativo univariado y multivariado incluyó estadística standard, análisis de varianza, análisis de componentes principales y análisis discriminante. La variación individual, según lo expresado por el coeficiente de variación, fue relativamente alta para algunas variables. Los cráneos de A. gazella fueron proporcionalmente más grandes que aquellos de A. australis para todas las variables estudiadas, excepto dos: longitud de la sutura escamoso-yugal y longitud

  20. Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

    Energy Technology Data Exchange (ETDEWEB)

    Beal, D. [BA-PIRC, Cocoa, FL (United States); McIlvaine, J. [BA-PIRC, Cocoa, FL (United States); Fonorow, K. [BA-PIRC, Cocoa, FL (United States); Martin, E. [BA-PIRC, Cocoa, FL (United States)

    2011-11-01

    This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces.

  1. The global fur industry

    DEFF Research Database (Denmark)

    Hansen, Henning Otte

    2014-01-01

    with regards to the fur sector, and the price of fur is volatile in the short and long run. A new world trade pattern and international specialization have emerged in recent years. The comparative advantages of the fur sector change along the fur value chain, while China’s position on the global fur market has...... and international statistics about the fur sector. This article analyzes the production and international trade in fur based on information from official statistics, trade associations, companies, scientific papers and reports, interviews with experts, etc.. Markets and market conditions play a very important role...

  2. Device for removing fur

    International Nuclear Information System (INIS)

    Hanawa, Minoru; Nakagawa, Takao; Sakuma, Toyoo; Yonemura, Eizo.

    1976-01-01

    Purpose: To effectively remove fur adhered to fuel rods and to increase working efficiency without use of a lengthy hose. Constitution: In the fur removing device of the present invention, brushes rotated by gears are provided within a casing so that fur adhered to the fuel rods are removed by the brushes and water is rotatably moved by blades housed therein to outwardly blow fur floating in water by means of a centrifugal force. Then, the fur is filtered by a filter outwardly provided. In this way, the fur may be collected within the device to avoid contamination to others. (Kamimura, M.)

  3. Seals

    International Nuclear Information System (INIS)

    Welsher, R.A.G.

    1982-01-01

    An aperture through a biological shield is sealed by a flexible sheath having a beading at one end located on an annular member slidable in the aperture such that the beading bears in sealing engagement against the sides of the aperture. The annular member is retained by a retractable latch and can be rejected by pushing it out of the aperture using a replacement annular member with a replacement sheath thereon to butt against the annular member to be rejected. The replacement annular member may be mounted on a tubular device having an outer co-axial member for operating the latch when the replacement annular member butts against the annular member to be rejected. Applications include effecting a seal between a remote handling equipment and a wall through which the equipment extends. (author)

  4. Impact of the 2015 El Niño-Southern Oscillation on the Abundance and Foraging Habits of Guadalupe Fur Seals and California Sea Lions from the San Benito Archipelago, Mexico.

    Directory of Open Access Journals (Sweden)

    Fernando R Elorriaga-Verplancken

    Full Text Available The abundance of California sea lions (Zalophus californianus (CSLs and Guadalupe fur seals (Arctocephalus philippii townsendi (GFSs from the San Benito Archipelago (SBA was determined through nine monthly surveys in 2014-2015. Assessment of their foraging habits was examined based on the isotopic analysis of pups (maternal indicators (SIAR/SIBER-R. Environmental variability between 2014 and 2015 was also analyzed, in terms of sea surface temperature (SST and chlorophyll (Chl-a concentration. Both otariids reached their highest abundance in July of both years; however, relative to 2014, the 2015 survey showed a 59.7% decline in the total GFS abundance and a 42.9% decrease of GFS pups, while total CSL abundance decreased 52.0% and CSL pup presence decreased in 61.7%. All monthly surveys for both otariids showed a similar trend (>50% decrease in 2015. Compared to 2014, the 2015 GFSs isotopic niche was three times larger (2.0 in 2015, 0.6 in 2014 and the δ13C was significantly lower. CSLs also showed significantly lower δ13C and higher δ15N in 2015. Interannual segregation was greater for CSLs, and their pup body mass was also significantly lower during the 2015 breeding season (mean = 8.7 kg than in the same season of 2014 (mean = 9.9 kg. The decrease in δ13C for both otariids reflected a more oceanic foraging; most likely associated with the decline in primary productivity in surrounding areas to the SBA, related to a higher SST caused by the 2015 ENSO, with a subsequent increase in foraging effort. These would explain the fewer observed individuals on land, especially pups, which showed diminished body condition (CSLs. This study highlights the importance of marine mammals as sentinel species that respond dynamically to changes in environment, providing valuable information on the effect of ENSO on pinnipeds in Mexican waters.

  5. Fur and sustainability

    DEFF Research Database (Denmark)

    Skjold, Else; Ræbild, Ulla; Tanderup, Sisse

    2016-01-01

    interviews and observations at the premises of Kopenhagen Fur, as well as with stakeholders and collaborate partners in Denmark and in China. The definition of sustainability in the report must be seen as related to Design School Kolding's research umbrella of Sustainable Futures - a term chosen to unite...... practices around retail and communication (by Else Skjold, PhD in user studies and business management). On the basis of these four sub-projects, the report concludes the following: Currently, fur is placed very centrally in the moral debates around sustainability, as fur farming highligts environmental...... sustainability within the garment sector at large, and to define its own unique position for the future. With a departure in the the four sub-projects, the report lists a line of recommendations for how it would be possible to develop and revitalise traditional and current practices around fur design...

  6. Fur skin and fur garment trade between Europe and Asia

    DEFF Research Database (Denmark)

    Hansen, Henning Otte

    2016-01-01

    International trade and specialization with agricultural raw materials and processed products is often rather limited due to trade barriers, logistic problems and food security. This production of raw fur skin - which is also considered an agricultural product - mostly takes place in the Western...... hemisphere, and to a high degree in Europe, while processing and production of fur garments now more and more takes place in Asia. The objective of this paper is to analyze, quantify and explain trade patterns and international specialization within fur skin and fur garments focusing on Europa and Asia...... trade with fur skin products between Asia and Europe has increased remarkably during the recent decades. Europe accounts for a major share of world production and export of raw fur skin, and Asia accounts for the major part of the subsequent processing. This means that there is a significant export...

  7. Fur and Sustainability

    DEFF Research Database (Denmark)

    Skjold, Else; Csaba, Fabian

    2016-01-01

    This paper explores the notion of deeper luxury, which insists that 'real' luxury should involve sustainable practices in the production and consumption of luxury goods. It traces historical and recent developments in the field of fur, to understand the implications, uncertainties and ambiguities...... of luxury’s confrontation with sustainability. Considering fur in relation to future standards for luxury products, we raise questions about moral problematisation and justification of luxury in terms of sustainability. We first examine the encounter of luxury with sustainability and explain...... the significance of the notion of ‘deeper luxury’. After taking stock of the impact of sustainability on luxury and various directions in which sustainable luxury is evolving, we discuss concepts of sustainable development in relation to the history of moral problematisation of luxury. This leads to the case...

  8. The southern elephant seal Mirounga leonina at Gough Island

    African Journals Online (AJOL)

    haul-out in December coincided with the elephant seal moulting season, the elephant seals were found on the vegetated areas whilst the majority of fur seals hauled out onto the boulder beach. No interactions between the two species were recorded. Potential predators of elephant seals, i.e. the killer whales Orcinus orca ...

  9. Reconsidering connectivity in the sub-Antarctic.

    Science.gov (United States)

    Moon, Katherine L; Chown, Steven L; Fraser, Ceridwen I

    2017-11-01

    Extreme and remote environments provide useful settings to test ideas about the ecological and evolutionary drivers of biological diversity. In the sub-Antarctic, isolation by geographic, geological and glaciological processes has long been thought to underpin patterns in the region's terrestrial and marine diversity. Molecular studies using increasingly high-resolution data are, however, challenging this perspective, demonstrating that many taxa disperse among distant sub-Antarctic landmasses. Here, we reconsider connectivity in the sub-Antarctic region, identifying which taxa are relatively isolated, which are well connected, and the scales across which this connectivity occurs in both terrestrial and marine systems. Although many organisms show evidence of occasional long-distance, trans-oceanic dispersal, these events are often insufficient to maintain gene flow across the region. Species that do show evidence of connectivity across large distances include both active dispersers and more sedentary species. Overall, connectivity patterns in the sub-Antarctic at intra- and inter-island scales are highly complex, influenced by life-history traits and local dynamics such as relative dispersal capacity and propagule pressure, natal philopatry, feeding associations, the extent of human exploitation, past climate cycles, contemporary climate, and physical barriers to movement. An increasing use of molecular data - particularly genomic data sets that can reveal fine-scale patterns - and more effective international collaboration and communication that facilitates integration of data from across the sub-Antarctic, are providing fresh insights into the processes driving patterns of diversity in the region. These insights offer a platform for assessing the ways in which changing dispersal mechanisms, such as through increasing human activity and changes to wind and ocean circulation, may alter sub-Antarctic biodiversity patterns in the future. © 2017 Cambridge

  10. ''FUR'' - one size suits all

    International Nuclear Information System (INIS)

    Rutland, M.; Que, L.; Hassan, I.M.

    2000-01-01

    This work used amalgamated data from previous projects in order to test the concept that when organ function is expressed in terms of tracer kinetics, the results are independent of patient size or gender. Dynamic gamma camera studies were analysed by measuring the rate of movement of tracers from the blood into various organs. These rates were expressed as a ''fractional uptake rate'' (FUR), which is the fraction of tracer in the blood taken up by the organ per unit time. As these values were small, it was convenient to express the FUR per million seconds. The FUR was calculated using the expression FUR = SLOPE (of Rutland-Patlak plot), multiplied by B(0) (the blood curve value back-extrapolated to time zero), and divided by the TOTAL amount of tracer injected. Data were used from adult patients between the ages of 20 and 49 years who had normal organ function. Organ/tracer groups studied were the skeletal uptake of 99m Tc-MDP, the renal uptake of 99m Tc-MAG3, the renal uptake of 99m Tc-MDP, the renal uptake of 99m Tc-DTPA, the hepatic uptake of 99m Tc-colloid, the splenic uptake of 99m Tc-colloid, and the hepatic uptake of 99m Tc-DISIDA. Each organ/tracer group was divided into three subgroups according to patient size (smallest, middle and largest), and also into subgroups according to gender. Comparison of these subgroups did not show any significant size- or gender-related differences in FUR values. It is concluded that for patients with normally functioning organs the FUR is independent of patient size or gender. Thus, the FUR is a valuable way of expressing organ function, particularly in patients with unusual or rapidly changing body size, such as children. (orig.)

  11. Seals and sealing handbook

    CERN Document Server

    Flitney, Robert K

    2014-01-01

    Seals and Sealing Handbook, 6th Edition provides comprehensive coverage of sealing technology, bringing together information on all aspects of this area to enable you to make the right sealing choice. This includes detailed coverage on the seals applicable to static, rotary and reciprocating applications, the best materials to use in your sealing systems, and the legislature and regulations that may impact your sealing choices. Updated in line with current trends this updated reference provides the theory necessary for you to select the most appropriate seals for the job and with its 'Failur

  12. Hybrid fur rendering: combining volumetric fur with explicit hair strands

    DEFF Research Database (Denmark)

    Andersen, Tobias Grønbeck; Falster, Viggo; Frisvad, Jeppe Revall

    2016-01-01

    Hair is typically modeled and rendered using either explicitly defined hair strand geometry or a volume texture of hair densities. Taken each on their own, these two hair representations have difficulties in the case of animal fur as it consists of very dense and thin undercoat hairs in combination...... with coarse guard hairs. Explicit hair strand geometry is not well-suited for the undercoat hairs, while volume textures are not well-suited for the guard hairs. To efficiently model and render both guard hairs and undercoat hairs, we present a hybrid technique that combines rasterization of explicitly...... defined guard hairs with ray marching of a prismatic shell volume with dynamic resolution. The latter is the key to practical combination of the two techniques, and it also enables a high degree of detail in the undercoat. We demonstrate that our hybrid technique creates a more detailed and soft fur...

  13. Photosynthesis in a sub-Antarctic shore-zone lichen

    NARCIS (Netherlands)

    Smith, V.; Gremmen, N.J.M.

    2001-01-01

    Photosynthetic responses to moisture, light, temperature, salinity and inorganic nitrogen fertilization are reported for a shore-zone lichen Turgidiusculum complicatulum (formerly Mastodia tesselata), a possible recent introduction to sub-Antarctic Marion Island. Optimum moisture contents for net

  14. Pet fur or fake fur? A forensic approach

    Science.gov (United States)

    2014-01-01

    Background In forensic science there are many types of crime that involve animals. Therefore, the identification of the species has become an essential investigative tool. The exhibits obtained from such offences are very often a challenge for forensic experts. Indeed, most biological materials are traces, hair or tanned fur. With hair samples, a common forensic approach should proceed from morphological and structural microscopic examination to DNA analysis. However, the microscopy of hair requires a lot of experience and a suitable comparative database to be able to recognize with a high degree of accuracy that a sample comes from a particular species and then to determine whether it is a protected one. DNA analysis offers the best opportunity to answer the question, ‘What species is this?’ In our work, we analyzed different samples of fur coming from China used to make hats and collars. Initially, the samples were examined under a microscope, then the mitochondrial DNA was tested for species identification. For this purpose, the genetic markers used were the 12S and 16S ribosomal RNA, while the hypervariable segment I of the control region was analyzed afterwards, to determine whether samples belonged to the same individual. Results Microscopic examination showed that the fibres were of animal origin, although it was difficult to determine with a high degree of confidence which species they belonged to and if they came from a protected species. Therefore, DNA analysis was essential to try to clarify the species of these fur samples. Conclusions Macroscopic and microscopic analysis confirmed the hypothesis regarding the analyzed hair belonging to real animals, although it failed to prove with any kind of certainty which actual family it came from, therefore, the species remains unknown. Sequence data analysis and comparisons with the samples available in GenBank showed that the hair, in most cases, belonged to the Canidae family, and in one case only to

  15. seal Arctocephaius tropicaiis at Gough Island

    African Journals Online (AJOL)

    Population increase in the Amsterdam Island fur seal Arctocephaius tropicaiis at Gough Island. M.N. Bester. Mammal Research Institute, University of Pretoria, Pretoria. Population size of Arctocephalus tropicalis on Gough Island was determined by direct censuses of parts of the coast duro ing the summers of 1974 - 1976 ...

  16. Analysis of the re-colonization of San Benito Archipelago by Guadalupe fur seals (Arctocephalus townsendi Análisis de la recolonización del archipiélago de San Benito por el lobo fino de Guadalupe (Arctocephalus townsendi

    Directory of Open Access Journals (Sweden)

    Manuel Esperón-Rodríguez

    2012-03-01

    Full Text Available Exploitation of the Guadalupe fur seal (GFS during the XVIII and XIX centuries almost extirpated the species. GFS were distributed from the Revillagigedo islands (Mexico to the gulf of Farallones (USA. At present, reproductive colonies are found at Guadalupe Island and San Benito Archipelago (SBA. The aim of this work was to analyze the process of re-colonization and the current status of GFS at SBA. The first births and the occupation of the west island of the SBA are also reported. Census data from 1997 to 2007 indicated an annual growth rate for the population of 21.6%. The population size, growth tendency of the colony, reproductive biology, and food preferences were also studied. A total of 2,227 GFS were counted at SBA. Three squid species (Loligo opalescens, Onychoteuthis banksii, Dosidicus gigas were found to be the main dietary components. Territoriality, activity patterns, and reproductive behavior were similar for the seals from Guadalupe Island and SBA. The mean growth rate for pups from SBA was calculated and compared to that of the pups at Guadalupe Island (SBA: 6.7 ± 1.4 kg, 68.9 ± 2.64 cm; Guadalupe Island: 5.9 ± 0.5 kg, 67.29 ± 4.3 cm. The length of food foraging trips by females was measured, suggesting that the SBA colony is probably near an important feeding area. Maternal care patterns could indicate different strategies of nursing-foraging trips between the SBA and Guadalupe Island. The population of fur seals at SBA is expected to increase as there are no limitations in terms of reproductive space or available food resources in the area.La explotación del lobo fino de Guadalupe (LFG durante los siglos XVIII y XIX casi extinguió a la especie. El LFG se distribuye desde las islas Revillagigedo (México hasta el golfo de Farallones (USA. En la actualidad las colonias reproductivas se encuentran en la isla de Guadalupe y en el archipiélago de San Benito (ASB. El objetivo de este trabajo fue analizar el proceso de re

  17. Seals and sealing handbook

    CERN Document Server

    Flitney, Robert K

    2007-01-01

    Wherever machinery operates there will be seals of some kind ensuring that the machine remains lubricated, the fluid being pumped does not leak, or the gas does not enter the atmosphere. Seals are ubiquitous, in industry, the home, transport and many other places. This 5th edition of a long-established title covers all types of seal by application: static, rotary, reciprocating etc. The book bears little resemblance to its predecessors, and Robert Flitney has re-planned and re-written every aspect of the subject. No engineer, designer or manufacturer of seals can afford to be without this uniq

  18. Population increase in the Amsterdam Island fur seal Arctocephaius ...

    African Journals Online (AJOL)

    Population size of Arctocephalus tropicalis on Gough Island was determined by direct censuses of parts of the coast during the summers of 1974 - 1976 and 1977 - 1978 and correction factors for undercounting and seasonal cycles were applied. Present population size is approximately 200000, giving an intrinsic rate of ...

  19. The macaroni penguin Eudyptes chrysolophus has a subantarctic ...

    African Journals Online (AJOL)

    spamer

    Key words: breeding, diet, Eudyptes chrysolophus, macaroni penguin, Marion Island, population, Subantarctic ... Sea Elephant Bay. Van den Boogaard River. Ship's Cove (south). Macaroni Bay (north). Archway Bay (north). East Cape (a). Bullard Beach North (a) ... of breeding birds at these two colonies were mapped.

  20. Freshwater invertebrates of sub-Antarctic Marion Island | Dartnall ...

    African Journals Online (AJOL)

    The aquatic species include five platyhelminthes, a gastrotrich, three tardigrades, 28 rotifers, six nematodes, two annelids and 11 arthropods. Most are familiar species that have been recorded on other sub-Antarctic islands. The invertebrate faunas of the various freshwater habitats were basically similar in species ...

  1. Subantarctic peatlands and their potential as palaeoenvironmental and palaeoclimatic archives

    NARCIS (Netherlands)

    Van der Putten, N.; Mauquoy, D.; Verbruggen, C.; Björck, S.

    2012-01-01

    Subantarctic islands are located within the Antarctic Circumpolar Current and the southern westerly wind belt, the latter called Southern Westerlies, making them unique terrestrial archives to investigate past changes in oceanic and atmospheric circulation patterns in the southern mid-latitudes. The

  2. Investigating Fur as Mediator of Sustainability

    DEFF Research Database (Denmark)

    Skjold, Else; Ræbild, Ulla

    2016-01-01

    This paper builds on two sub-projects conducted under the framework of a larger research programme called Fur and Sustainability – a Design Perspective. From 2014-16, we (Skjold et al 2016) took part in the programme which was part of a larger partnership agreement between Design School Kolding (DK......) and raw fur supplier and auction house Kopenhagen Fur (DK). What the paper shows and discusses is the, oftentimes, missed opportunity of acknowledging the potential of design as mediation between production and consumption when seen in the light of the sustainable discourse. The paper exemplifies...... this with selected findings from the two sub-projects that engage, respectively, with design processes of designers and furriers, and practices of users of inherited fur garments....

  3. 19 CFR 12.63 - Seal-skin or sea-otter-skin waste.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Seal-skin or sea-otter-skin waste. 12.63 Section... OF THE TREASURY SPECIAL CLASSES OF MERCHANDISE Fur-Seal Or Sea-Otter Skins § 12.63 Seal-skin or sea-otter-skin waste. Seal-skin or sea-otter-skin waste composed of small pieces not large enough to be...

  4. Glass sealing

    Energy Technology Data Exchange (ETDEWEB)

    Brow, R.K.; Kovacic, L.; Chambers, R.S. [Sandia National Labs., Albuquerque, NM (United States)

    1996-04-01

    Hernetic glass sealing technologies developed for weapons component applications can be utilized for the design and manufacture of fuel cells. Design and processing of of a seal are optimized through an integrated approach based on glass composition research, finite element analysis, and sealing process definition. Glass sealing procedures are selected to accommodate the limits imposed by glass composition and predicted calculations.

  5. Sealing device

    Science.gov (United States)

    Garcia-Crespo, Andres Jose

    2013-12-10

    A sealing device for sealing a gap between a dovetail of a bucket assembly and a rotor wheel is disclosed. The sealing device includes a cover plate configured to cover the gap and a retention member protruding from the cover plate and configured to engage the dovetail. The sealing device provides a seal against the gap when the bucket assemply is subjected to a centrifugal force.

  6. Mercury exposure in a large subantarctic avian community

    International Nuclear Information System (INIS)

    Carravieri, Alice; Cherel, Yves; Blévin, Pierre; Brault-Favrou, Maud; Chastel, Olivier; Bustamante, Paco

    2014-01-01

    Mercury (Hg) contamination poses potential threats to ecosystems worldwide. In order to study Hg bioavailability in the poorly documented southern Indian Ocean, Hg exposure was investigated in the large avian community of Kerguelen Islands. Adults of 27 species (480 individuals) showed a wide range of feather Hg concentrations, from 0.4 ± 0.1 to 16.6 ± 3.8 μg g −1 dry weight in Wilson's storm petrels and wandering albatrosses, respectively. Hg concentrations increased roughly in the order crustacean- < fish- ≤ squid- ≤ carrion-consumers, confirming that diet, rather than taxonomy, is an important driver of avian Hg exposure. Adults presented higher Hg concentrations than chicks, due to a longer duration of exposure, with the only exception being the subantarctic skua, likely because of feeding habits' differences of the two age-classes in this species. High Hg concentrations were reported for three species of the poorly known gadfly petrels, which merit further investigation. - Highlights: • Feather Hg concentrations were measured in 27 sympatric subantarctic bird species. • Inter-specific variation in Hg exposure depends on feeding habits, not taxonomy. • Hg concentrations were higher in adults than chicks due to longer exposure duration. • Hg is highly bioavailable in the Southern Ocean, which merits further investigation. - Mercury concentrations in feathers of sympatric subantarctic birds (27 species) are driven mainly by feeding habits and exposure duration

  7. Mechanical seals

    CERN Document Server

    Mayer, E

    1977-01-01

    Mechanical Seals, Third Edition is a source of practical information on the design and use of mechanical seals. Topics range from design fundamentals and test rigs to leakage, wear, friction and power, reliability, and special designs. This text is comprised of nine chapters; the first of which gives a general overview of seals, including various types of seals and their applications. Attention then turns to the fundamentals of seal design, with emphasis on six requirements that must be considered: sealing effectiveness, length of life, reliability, power consumption, space requirements, and c

  8. 76 FR 72132 - Regulations Under The Fur Products Labeling Act

    Science.gov (United States)

    2011-11-22

    ... then suggests issues for discussion at the hearing. A. Fur Act and Rules The Fur Act prohibits..., fleece, and fur-bearing animals.'' \\9\\ The Act further requires these names to ``be the true English names for the animals in question, or in the absence of a true English name for an animal, the name by...

  9. Measure Guideline: Summary of Interior Ducts in New Construction, Including an Efficient, Affordable Method to Install Fur-Down Interior Ducts

    Energy Technology Data Exchange (ETDEWEB)

    Beal, D.; McIlvaine , J.; Fonorow, K.; Martin, E.

    2011-11-01

    This document illustrates guidelines for the efficient installation of interior duct systems in new housing, including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. This document illustrates guidelines for the efficient installation of interior duct systems in new housing. Interior ducts result from bringing the duct work inside a home's thermal and air barrier. Architects, designers, builders, and new home buyers should thoroughly investigate any opportunity for energy savings that is as easy to implement during construction, such as the opportunity to construct interior duct work. In addition to enhanced energy efficiency, interior ductwork results in other important advantages, such as improved indoor air quality, increased system durability and increased homeowner comfort. While the advantages of well-designed and constructed interior duct systems are recognized, the implementation of this approach has not gained a significant market acceptance. This guideline describes a variety of methods to create interior ducts including the fur-up chase method, the fur-down chase method, and interior ducts positioned in sealed attics or sealed crawl spaces. As communication of the intent of an interior duct system, and collaboration on its construction are paramount to success, this guideline details the critical design, planning, construction, inspection, and verification steps that must be taken. Involved in this process are individuals from the design team; sales/marketing team; and mechanical, insulation, plumbing, electrical, framing, drywall and solar contractors.

  10. Security seal

    Science.gov (United States)

    Gobeli, Garth W.

    1985-01-01

    Security for a package or verifying seal in plastic material is provided by a print seal with unique thermally produced imprints in the plastic. If tampering is attempted, the material is irreparably damaged and thus detectable. The pattern of the imprints, similar to "fingerprints" are recorded as a positive identification for the seal, and corresponding recordings made to allow comparison. The integrity of the seal is proved by the comparison of imprint identification records made by laser beam projection.

  11. Seal arrangement

    International Nuclear Information System (INIS)

    Dempsey, J.D.

    1978-01-01

    A hydraulically balanced face type shaft seal is provided in which the opening and closing seal face areas retain concentricity with each other in the event of lateral shaft displacement. The seal arrangement is for a vertical high pressure pump, indented for use in the cooling system of a nuclear reactor. (Auth.)

  12. 76 FR 13550 - Fur Products Labeling Act

    Science.gov (United States)

    2011-03-14

    ... products of ``relatively small quantity or values from labeling requirements. 15 U.S.C. 69(d). Exercising... things, the economic impact of, and the continuing need for, the Fur Rule provisions; the benefits of the...) Is there a continuing need for the Rules as currently promulgated? Why or why not? (2) What benefits...

  13. The German Interlinguistics Society Gesellschaft fur Interlinguistik.

    Science.gov (United States)

    O Riain, Sean

    2003-01-01

    Describes the German interlinguistics society Gesellschaft fur Interlinguistik (GIL), which was founded to bring together interlinguistics and esperantology scholars. Highlights GIL's principal fields of activity and discusses its role in the fields of international linguistic communication, language planning, esperantolgy, and the teaching of…

  14. Summer diet of the Salvin's prion at sub-Antarctic Marion Island

    African Journals Online (AJOL)

    1988-02-14

    Feb 14, 1988 ... Thirty-nine food samples were collected from Salvin's prions Pachyptila salvini at sub-Antarctic Marion Island,. Prince Edward Islands. ..... guide to foraging methods used by marine birds in. Antarctic and sub-Antarctic seas. BIOMASS Handbook. 24: 1-22. GRINDLEY, J.R. & LANE, S.B. 1979. Zooplankton.

  15. A tale of two islands: contrasting fortunes for Subantarctic skuas at ...

    African Journals Online (AJOL)

    Subantarctic skuas Catharacta antarctica are key predators of burrowing petrels at sub-Antarctic islands, and can be used to monitor the health of burrowing petrel populations. A survey of skuas at the Prince Edward Islands was conducted during December 2008, repeating a previous survey in December 2001.

  16. Historic cohort study in Montreal's fur industry.

    Science.gov (United States)

    Guay, D; Siemiatycki, J

    1987-01-01

    A historic cohort mortality study was carried out among two groups of male workers in the Montreal fur industry: 263 dressers and dyers and 599 fur garment manufacturers. The first group is exposed to a very wide variety of chemicals used in tanning, cleaning, and dyeing fur, including substances considered to be carcinogenic and/or mutagenic. The second group is exposed to residue from the dressing and dyeing stage and to respirable fur dust. The cohorts consisted of all active members of two unions as of January 1, 1966. The mean age of the workers was 43.2 and the mean number of years since first employment 14.1. The follow-up period was from January 1, 1966, to December 31, 1981; 95% of the workers were successfully traced. Observed deaths were compared with those expected based on mortality rates of the population of metropolitan Montreal. Standardized mortality ratios (SMRs) for the manufacturers were significantly low, probably because of the ethnic composition of the cohort and a healthy worker effect. SMRs for the dressers and dyers were also low, but not as low as for the manufacturers. When attention was restricted to the French Canadians in the cohort, the observed deaths were close to the expected; there was a noteworthy excess of colorectal cancer (four observed, 0.8 expected) for dressers and dyers. Apart from this weak suggestive evidence, the results did not indicate any excess mortality risks in the fur industry. However, because of the relatively small number of expected and observed deaths in the cohort and especially among the heavily exposed dressers and dyers, the confidence intervals around SMR estimates were wide and excess risks cannot be ruled out.

  17. Effect of wind on Svalbard reindeer fur insulation

    Directory of Open Access Journals (Sweden)

    Christine Cuyler

    2002-06-01

    Full Text Available The heat transfer through Svalbard reindeer (Rangifer tarandus platyrhynchus fur samples was studied with respect to wind velocity, season and animal age. A total of 33 dorsal fur sections were investigated using a wind tunnel. Insulation varied with season (calving, summer, autumn and winter. At zero wind velocity, fur insulation was significantly different between seasons for both calf and adult fur samples. At the same time, there was no significant difference between calf and adult insulation for the summer, autumn and winter seasons. Calf fur insulated as well as adult fur. Winter insulation of Svalbard reindeer was approximately 3 times that of summer. Increasing wind veloci¬ty increased heat loss, however, the increase was not dramatic. When wind coefficients (slope of the heat transfer regression lines were compared, between season and between calf and adult, no significant differences were reported. All fur samples showed similar increases in heat transfer for wind velocities between 0 and 10 m.s-1. The conductance of winter fur of Svalbard reindeer was almost half that of caribou fur. Also, conductance was not as greatly influenced by wind as caribou fur

  18. Nozzle seal

    International Nuclear Information System (INIS)

    Herman, R.F.

    1977-01-01

    In an illustrative embodiment of the invention, a nuclear reactor pressure vessel, having an internal hoop from which the heated coolant emerges from the reactor core and passes through to the reactor outlet nozzles, is provided with sealing members operatively disposed between the outlet nozzle and the hoop. The sealing members are biased against the pressure vessel and the hoop and are connected by a leak restraining member establishing a leak-proof condition between the inlet and outlet coolants in the region about the outlet nozzle. Furthermore, the flexible responsiveness of the seal assures that the seal will not structurally couple the hoop to the pressure vessel

  19. Nozzle seal

    International Nuclear Information System (INIS)

    Walling, G.A.

    1977-01-01

    In an illustrative embodiment of the invention, a nuclear reactor pressure vessel, having an internal hoop from which the heated coolant emerges from the reactor core and passes through to the reactor outlet nozzles, is provided with sealing rings operatively disposed between the outlet nozzles and the hoop. The sealing rings connected by flexible members are biased against the pressure vessel and the hoop, establishing a leak-proof condition between the inlet and outlet coolants in the region about the outlet nozzle. Furthermore, the flexible responsiveness of the seal assures that the seal will not structurally couple the hoop to the pressure vessel. 4 claims, 2 figures

  20. Ceramic Seal.

    Energy Technology Data Exchange (ETDEWEB)

    Smartt, Heidi A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Romero, Juan A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Custer, Joyce Olsen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hymel, Ross W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Krementz, Dan [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Gobin, Derek [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Harpring, Larry [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Martinez-Rodriguez, Michael [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Varble, Don [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); DiMaio, Jeff [Tetramer Technologies, Pendleton, SC (United States); Hudson, Stephen [Tetramer Technologies, Pendleton, SC (United States)

    2016-11-01

    Containment/Surveillance (C/S) measures are critical to any verification regime in order to maintain Continuity of Knowledge (CoK). The Ceramic Seal project is research into the next generation technologies to advance C/S, in particular improving security and efficiency. The Ceramic Seal is a small form factor loop seal with improved tamper-indication including a frangible seal body, tamper planes, external coatings, and electronic monitoring of the seal body integrity. It improves efficiency through a self-securing wire and in-situ verification with a handheld reader. Sandia National Laboratories (SNL) and Savannah River National Laboratory (SRNL), under sponsorship from the U.S. National Nuclear Security Administration (NNSA) Office of Defense Nuclear Nonproliferation Research and Development (DNN R&D), have previously designed and have now fabricated and tested Ceramic Seals. Tests have occurred at both SNL and SRNL, with different types of tests occurring at each facility. This interim report will describe the Ceramic Seal prototype, the design and development of a handheld standalone reader and an interface to a data acquisition system, fabrication of the seals, and results of initial testing.

  1. Ceramic Seal

    International Nuclear Information System (INIS)

    Smartt, Heidi A.; Romero, Juan A.; Custer, Joyce Olsen; Hymel, Ross W.; Krementz, Dan; Gobin, Derek; Harpring, Larry; Martinez-Rodriguez, Michael; Varble, Don; DiMaio, Jeff; Hudson, Stephen

    2016-01-01

    Containment/Surveillance (C/S) measures are critical to any verification regime in order to maintain Continuity of Knowledge (CoK). The Ceramic Seal project is research into the next generation technologies to advance C/S, in particular improving security and efficiency. The Ceramic Seal is a small form factor loop seal with improved tamper-indication including a frangible seal body, tamper planes, external coatings, and electronic monitoring of the seal body integrity. It improves efficiency through a self-securing wire and in-situ verification with a handheld reader. Sandia National Laboratories (SNL) and Savannah River National Laboratory (SRNL), under sponsorship from the U.S. National Nuclear Security Administration (NNSA) Office of Defense Nuclear Nonproliferation Research and Development (DNN R&D), have previously designed and have now fabricated and tested Ceramic Seals. Tests have occurred at both SNL and SRNL, with different types of tests occurring at each facility. This interim report will describe the Ceramic Seal prototype, the design and development of a handheld standalone reader and an interface to a data acquisition system, fabrication of the seals, and results of initial testing.

  2. Electronic seal

    International Nuclear Information System (INIS)

    Musyck, E.

    1981-01-01

    An electronic seal is presented for a volume such as container for fissile materials. The seal encloses a lock for barring the space as well as a device for the detection and the recording of the intervention of the lock. (AF)

  3. Ferrules seals

    Science.gov (United States)

    Smith, J.L.

    1984-07-10

    A device is provided for sealing an inner tube and an outer tube without excessively deforming the tubes. The device includes two ferrules which cooperate to form a vacuum-tight seal between the inner tube and outer tube and having mating surfaces such that overtightening is not possible. 3 figs.

  4. Sealing devices

    International Nuclear Information System (INIS)

    Coulson, R.A.

    1980-01-01

    A sealing device for minimising the leakage of toxic or radioactive contaminated environments through a biological shield along an opening through which a flexible component moves that penetrates the shield. The sealing device comprises an outer tubular member which extends over a length not less than the maximum longitudinal movement of the component along the opening. An inner sealing block is located intermediate the length of the component by connectors and is positioned in the bore of the outer tubular member to slide in the bore and effect a seal over the entire longitudinal movement of the component. The cross-section of the device may be circular and the block may be of polytetrafluoroethylene or of nylon impregnated with molybdenum or may be metallic. A number of the sealing devices may be combined into an assembly for a plurality of adjacent longitudinally movable components, each adapted to sustain a tensile load, providing the various drives of a master-slave manipulator. (author)

  5. Historical analysis of Newfoundland dog fur colour genetics ...

    African Journals Online (AJOL)

    Whereas small white marks on the chest and/or paw appears to be a random event, the historical data supports the existence of an 'Irish spotted' fur colour pattern, with white head blaze, breast, paws and tail tip, in spotted/spotted homozygotes. Keywords: Fur colour genetics, Irish spotting, Landseer Newfoundland, MITF, ...

  6. Transcriptional regulation by Ferric Uptake Regulator (Fur) in pathogenic bacteria.

    Science.gov (United States)

    Troxell, Bryan; Hassan, Hosni M

    2013-01-01

    In the ancient anaerobic environment, ferrous iron (Fe(2+)) was one of the first metal cofactors. Oxygenation of the ancient world challenged bacteria to acquire the insoluble ferric iron (Fe(3+)) and later to defend against reactive oxygen species (ROS) generated by the Fenton chemistry. To acquire Fe(3+), bacteria produce low-molecular weight compounds, known as siderophores, which have extremely high affinity for Fe(3+). However, during infection the host restricts iron from pathogens by producing iron- and siderophore-chelating proteins, by exporting iron from intracellular pathogen-containing compartments, and by limiting absorption of dietary iron. Ferric Uptake Regulator (Fur) is a transcription factor which utilizes Fe(2+) as a corepressor and represses siderophore synthesis in pathogens. Fur, directly or indirectly, controls expression of enzymes that protect against ROS damage. Thus, the challenges of iron homeostasis and defense against ROS are addressed via Fur. Although the role of Fur as a repressor is well-documented, emerging evidence demonstrates that Fur can function as an activator. Fur activation can occur through three distinct mechanisms (1) indirectly via small RNAs, (2) binding at cis regulatory elements that enhance recruitment of the RNA polymerase holoenzyme (RNAP), and (3) functioning as an antirepressor by removing or blocking DNA binding of a repressor of transcription. In addition, Fur homologs control defense against peroxide stress (PerR) and control uptake of other metals such as zinc (Zur) and manganese (Mur) in pathogenic bacteria. Fur family members are important for virulence within bacterial pathogens since mutants of fur, perR, or zur exhibit reduced virulence within numerous animal and plant models of infection. This review focuses on the breadth of Fur regulation in pathogenic bacteria.

  7. Apo and Iron Bound Fur Repression and the Role of Fur in vivo

    Science.gov (United States)

    2010-03-24

    transport (frpB, ceuE) (257). IG-443 is encoded in the intergenic region between fur and HP1033, and is predicted to regulate the flagellar motor ...relationship with the development of gastroesophageal reflux disease (33), Barrett’s esophagus (64), esophageal adenocarcinoma (73), diarrheal diseases (55...active tuberculosis (51), asthma, and other allergic disorders (7, 13, 53). Because of this, a vaccination or therapeutic approach to abrogate H

  8. Mesoscale eddies in the Subantarctic Front-Southwest Atlantic

    Directory of Open Access Journals (Sweden)

    Pablo D. Glorioso

    2005-12-01

    Full Text Available Satellite and ship observations in the southern southwest Atlantic (SSWA reveal an intense eddy field and highlight the potential for using continuous real-time satellite altimetry to detect and monitor mesoscale phenomena with a view to understanding the regional circulation. The examples presented suggest that mesoscale eddies are a dominant feature of the circulation and play a fundamental role in the transport of properties along and across the Antarctic Circumpolar Current (ACC. The main ocean current in the SSWA, the Falkland-Malvinas Current (FMC, exhibits numerous embedded eddies south of 50°S which may contribute to the patchiness, transport and mixing of passive scalars by this strong, turbulent current. Large eddies associated with meanders are observed in the ACC fronts, some of them remaining stationary for long periods. Two particular cases are examined using a satellite altimeter in combination with in situ observations, suggesting that cross-frontal eddy transport and strong meandering occur where the ACC flow intensifies along the sub-Antarctic Front (SAF and the Southern ACC Front (SACCF.

  9. 29 CFR 780.124 - Raising of fur-bearing animals.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Raising of fur-bearing animals. 780.124 Section 780.124... General Scope of Agriculture Raising of Livestock, Bees, Fur-Bearing Animals, Or Poultry § 780.124 Raising of fur-bearing animals. (a) The term “fur-bearing animals” has reference to animals which bear fur of...

  10. Evaluation of the concentration of allergens from mites in fur and households dust of dogs with atopic dermatitis

    Directory of Open Access Journals (Sweden)

    Dévaki L. de Assunção

    Full Text Available ABSTRACT: This study evaluated the concentration of Der p 1, Der f 1 and Blo t 5 in the fur and households of 20 dogs with atopic dermatitis (AD and 20 healthy dogs. The diagnosis of AD was clinical based on Favrot’s criteria. Dust samples were collected with a domestic vacuum cleaner. For each site, 1m2 was vacuumed for 2 min. The samples were collected in separate filters, transferred into plastic containers, sealed and kept frozen until ELISA analysis. In the fur of atopic dogs the average concentration of Der p 1 was 0.25μg/g compared to 0.03μg/g in healthy dogs. In households with atopic dogs the highest concentrations of Der p 1 were found in carpets (2.18μg/g, followed by couches (1.53μg/g, beds (1.14μg/g, dogs’ bed linen (0.64μg/g and floors (0.14μg/g. The concentrations of Der p 1 on carpets, couches and beds were significantly higher than in atopic dogs’ fur (p0.05. The concentrations of Der p 1, Der f 1 and Blo t 5 were equivalent in atopic and non-atopic dog’s households. Among the allergens studied, Der p 1 was the most commonly found, predominantly in carpets and couches.

  11. Trends in price and productivity in the fur sector

    DEFF Research Database (Denmark)

    Hansen, Henning Otte

    2016-01-01

    in the long term. The terms of trade - the ratio between output and input prices - is also unstable but with a clear negative long-term trend. The developments in prices and productivity cause high demands on management both on individual fur farms and further down the value chain.......Price and productivity are two important competitive factors for the fur skin production worldwide. In the paper it is demonstrated that there are significant long-term trends towards increasing productivity and decreasing price ratios. The trend follows the same pattern as for other agricultural...... products. The analysis is based on Danish conditions as a case. By using different measurement methods it is demonstrated that productivity is increasing in several places in fur value chain. The fur skin prices, which are largely determined in international markets, are both very volatile and decreasing...

  12. Fur is a repressor of biofilm formation in Yersinia pestis.

    Directory of Open Access Journals (Sweden)

    Fengjun Sun

    Full Text Available BACKGROUND: Yersinia pestis synthesizes the attached biofilms in the flea proventriculus, which is important for the transmission of this pathogen by fleas. The hmsHFRS operons is responsible for the synthesis of exopolysaccharide (the major component of biofilm matrix, which is activated by the signaling molecule 3', 5'-cyclic diguanylic acid (c-di-GMP synthesized by the only two diguanylate cyclases HmsT, and YPO0449 (located in a putative operonYPO0450-0448. METHODOLOGY/PRINCIPAL FINDINGS: The phenotypic assays indicated that the transcriptional regulator Fur inhibited the Y. pestis biofilm production in vitro and on nematode. Two distinct Fur box-like sequences were predicted within the promoter-proximal region of hmsT, suggesting that hmsT might be a direct Fur target. The subsequent primer extension, LacZ fusion, electrophoretic mobility shift, and DNase I footprinting assays disclosed that Fur specifically bound to the hmsT promoter-proximal region for repressing the hmsT transcription. In contrast, Fur had no regulatory effect on hmsHFRS and YPO0450-0448 at the transcriptional level. The detection of intracellular c-di-GMP levels revealed that Fur inhibited the c-di-GMP production. CONCLUSIONS/SIGNIFICANCE: Y. pestis Fur inhibits the c-di-GMP production through directly repressing the transcription of hmsT, and thus it acts as a repressor of biofilm formation. Since the relevant genetic contents for fur, hmsT, hmsHFRS, and YPO0450-0448 are extremely conserved between Y. pestis and typical Y. pseudotuberculosis, the above regulatory mechanisms can be applied to Y. pseudotuberculosis.

  13. Deglacial palaeoclimate at Puerto del Hambre, subantarctic Patagonia, Chile

    Science.gov (United States)

    Heusser, Calvin J.; Heusser, Linda E.; Lowell, Thomas V.; Moreira M., Andrés; Moreira M., Simón

    2000-02-01

    The primary objective of this study is to further substantiate multistep climatic forcing of late-glacial vegetation in southern South America. A secondary objective is to establish the age of deglaciation in Estrecho de Magallanes-Bahía Inútil. Pollen assemblages at 2-cm intervals in a core of the mire at Puerto del Hambre (53°3621S, 70°5553W) provide the basis for reconstructing the vegetation and a detailed account of palaeoclimate in subantarctic Patagonia. Chronology over the 262-cm length of core is regulated by 20 AMS radiocarbon dates between 14 455 and 10 089 14C yr BP. Of 13 pollen assemblage zones, the earliest representing the Oldest Dryas chronozone (14 455-13 000 14C yr BP) records impoverished steppe with decreasing frequencies and loss of southern beech (Nothofagus). Successive 100-yr-long episodes of grass/herbs and of heath (Empetrum/Ericaceae) before 14 000 14C yr BP infer deglacial successional communities under a climate of increased continentality prior to the establishment of grass-dominated steppe. The Bølling-Allerød (13 000-11 000 14C yr BP) is characterised by mesic grassland under moderating climate that with abrupt change to heath dominance after 12 000 14C yr BP was warmer and not as humid. At the time of the Younger Dryas (11 000-10 000 14C yr BP), grass steppe expanded with a return of colder, more humid climate. Later, with gradual warming, communities were invaded by southern beech. The Puerto del Hambre record parallels multistep, deglacial palaeoclimatic sequences reported elsewhere in the Southern Andes and at Taylor Dome in Antarctica. Deglaciation of Estrecho de Magallanes-Bahía Inútil is dated close to 14 455 14C yr BP, invalidating earlier dates of between 15 800 and 16 590 14C yr BP.

  14. Author Details

    African Journals Online (AJOL)

    Killer whales (Orcinus orca) at Marion Island, Southern Ocean Abstract · Vol 37, No 1 (2002) - Articles Pup growth and maternal attendance patterns in Subantarctic fur seals. Abstract · Vol 37, No 1 (2002) - Articles Juvenile survival and population regulation in southern elephant seals at Marion Island Abstract · Vol 43, No 2 ...

  15. Clawed forelimbs allow northern seals to eat like their ancient ancestors

    Science.gov (United States)

    Hocking, David P.; Marx, Felix G.; Sattler, Renae; Harris, Robert N.; Pollock, Tahlia I.; Sorrell, Karina J.; Fitzgerald, Erich M. G.; McCurry, Matthew R.; Evans, Alistair R.

    2018-04-01

    Streamlined flippers are often considered the defining feature of seals and sea lions, whose very name `pinniped' comes from the Latin pinna and pedis, meaning `fin-footed'. Yet not all pinniped limbs are alike. Whereas otariids (fur seals and sea lions) possess stiff streamlined forelimb flippers, phocine seals (northern true seals) have retained a webbed yet mobile paw bearing sharp claws. Here, we show that captive and wild phocines routinely use these claws to secure prey during processing, enabling seals to tear large fish by stretching them between their teeth and forelimbs. `Hold and tear' processing relies on the primitive forelimb anatomy displayed by phocines, which is also found in the early fossil pinniped Enaliarctos. Phocine forelimb anatomy and behaviour therefore provide a glimpse into how the earliest seals likely fed, and indicate what behaviours may have assisted pinnipeds along their journey from terrestrial to aquatic feeding.

  16. New records of Acari from the sub-Antarctic Prince Edward Islands

    NARCIS (Netherlands)

    Marshall, D.J.; Gremmen, N.J.M.; Coetzee, L.; Oconnor, B.M.; Pugh, P.J.A.; Theron, P.D.; Ueckermann, E.A.

    1999-01-01

    Sixty species of Acari are recorded from the sub-Antarctic Marion and Prince Edward Islands (the Prince Edward archipelago). Twenty of the 45 species collected on recent expeditions are new and currently undescribed. Other new taxa include a family of Mesostigmata, four new genera, and the first

  17. Additions and corrections to the lichen mycobiota of the subantarctic Prince Edward Islands

    NARCIS (Netherlands)

    Øvstedal, D.O.; Gremmen, N.J.M.

    2007-01-01

    Fifteen species are reported as new to the subantarctic Prince Edward Islands (47 degrees S, 38 degrees E). Of these 12 are added to the known lichens of Prince Edward Island, and four are added to the Marion Island species list. Two species are new to science, viz. Gyalecta azorellae Ovstedal, with

  18. Volcanic ash deposition and long-term vegetation change on Subantarctic Marion Island

    NARCIS (Netherlands)

    Yeloff, D.; Mauquoy, D.S.; Barber, K.; Way, S.; van Geel, B.; Turney, C.S.M.

    2007-01-01

    A c. 5500 year record of peatland development and vegetation change was generated from a core recovered from an Agrostis magellanica peat bog on subantarctic Marion Island, using palynomorph, plant macrofossil, and tephra analyses. Two tephra horizons (both 17 cm thick) were identified and dated to

  19. Improved circumferential shaft seal

    Science.gov (United States)

    Ludwig, L. P.; Strom, T. N.

    1974-01-01

    Comparative tests of modified and unmodified carbon ring seals showed that addition of helical grooves to conventional segmented carbon ring seals reduced leakage significantly. Modified seal was insensitive to shaft runout and to flooding by lubricant.

  20. Historical analysis of Newfoundland dog fur colour genetics

    Directory of Open Access Journals (Sweden)

    J. Bondeson

    2015-06-01

    Full Text Available This article makes use of digitized historic newspapers to analyze Newfoundland dog fur colour genetics, and fur colour variations over time. The results indicate that contrary to the accepted view, the ‘Solid’ gene was introduced into the British population of Newfoundland dogs in the 1840s. Prior to that time, the dogs were white and black (Landseer or white and brown, and thus spotted/spotted homozygotes. Due to ‘Solid’ being dominant over ‘spotted’, and selective breeding, today the majority of Newfoundland dogs are solid black. Whereas small white marks on the chest and/or paw appears to be a random event, the historical data supports the existence of an ‘Irish spotted’ fur colour pattern, with white head blaze, breast, paws and tail tip, in spotted/spotted homozygotes.

  1. Historical analysis of Newfoundland dog fur colour genetics

    OpenAIRE

    Bondeson, J.

    2015-01-01

    This article makes use of digitized historic newspapers to analyze Newfoundland dog fur colour genetics, and fur colour variations over time. The results indicate that contrary to the accepted view, the ‘Solid’ gene was introduced into the British population of Newfoundland dogs in the 1840s. Prior to that time, the dogs were white and black (Landseer) or white and brown, and thus spotted/spotted homozygotes. Due to ‘Solid’ being dominant over ‘spotted’, and selective breeding, today the majo...

  2. FurIOS: a web-based tool for identification of Vibrionaceae species using the fur gene

    DEFF Research Database (Denmark)

    Machado, Henrique; Cardoso, Joao; Giubergia, Sonia

    2017-01-01

    -sequence. The input is a DNA sequence that can be uploaded on the web service; the output is a table containing the strain identifier, e-value, and percentage of identity for each of the matches with rows colored in green for hits with high probability of being the same species. The service is available on the web at......: http://www.cbs.dtu.dk/services/furIOS-1.0/. The fur-sequences can be derived either from genome sequences or from PCR-amplification of the genomic region encoding the fur gene. We have used 191 strains identified as Vibrionaceae based on 16S rRNA gene sequence to test the PCR method and the web service...

  3. Deciphering Fur transcriptional regulatory network highlights its complex role beyond iron metabolism in Escherichia coli

    DEFF Research Database (Denmark)

    Seo, Sang Woo; Kim, Donghyuk; Latif, Haythem

    2014-01-01

    The ferric uptake regulator (Fur) plays a critical role in the transcriptional regulation of iron metabolism. However, the full regulatory potential of Fur remains undefined. Here we comprehensively reconstruct the Fur transcriptional regulatory network in Escherichia coli K-12 MG1655 in response...

  4. Results from the large scale in situ drift sealing experiment in the salt mine Sondershausen

    Energy Technology Data Exchange (ETDEWEB)

    Sitz, P.; Koch, G. [Freiberg Univ. of Mining an Technology, Institute of Mining Engineering (Germany); Gruner, M. [Wilsnack and Partners Freiberg / Saxony (Germany)

    2003-07-01

    The aim of the research, which is supported by the Federal Ministry for Education and Research (Bundesministerium fur Bildung und Forschung) and the state of Thuringia from 1997 to 2003, are long term stable drift sealing systems for underground waste disposals. As a result of the material selection for the sealing element bricks from a mixture of bentonite and quartz-sand were produced. The static abutment was built with natural salt bricks. A real drift sealing system was built in the former potash mine Sondershausen in a depth of 700 m and then tested under a fluid pressure up to 80 bar with saturated salt-brine. The functionality of the bentonite sealing element was proved successfully. Since 1998 some 500 t of such bentonite blocks with sand have been produced and built-in in underground sealing elements in salt mines. (authors)

  5. The allosteric behavior of Fur mediates oxidative stress signal transduction in Helicobacter pylori

    Directory of Open Access Journals (Sweden)

    Simone ePelliciari

    2015-08-01

    Full Text Available The microaerophilic gastric pathogen Helicobacter pylori is exposed to oxidative stress originating from the aerobic environment, the oxidative burst of phagocytes and the formation of reactive oxygen species, catalyzed by iron excess. Accordingly, the expression of genes involved in oxidative stress defense have been repeatedly linked to the ferric uptake regulator Fur. Moreover, mutations in the Fur protein affect the resistance to metronidazole, likely due to loss-of-function in the regulation of genes involved in redox control. Although many advances in the molecular understanding of HpFur function were made, little is known about the mechanisms that enable Fur to mediate the responses to oxidative stress.Here we show that iron-inducible, apo-Fur repressed genes, such as pfr and hydA, are induced shortly after oxidative stress, while their oxidative induction is lost in a fur knockout strain. On the contrary, holo-Fur repressed genes, such as frpB1 and fecA1, vary modestly in response to oxidative stress. This indicates that the oxidative stress signal specifically targets apo-Fur repressed genes, rather than impairing indiscriminately the regulatory function of Fur. Footprinting analyses showed that the oxidative signal strongly impairs the binding affinity of Fur towards apo-operators, while the binding towards holo-operators is less affected. Further evidence is presented that a reduced state of Fur is needed to maintain apo-repression, while oxidative conditions shift the preferred binding architecture of Fur towards the holo-operator binding conformation, even in the absence of iron. Together the results demonstrate that the allosteric regulation of Fur enables transduction of oxidative stress signals in H. pylori, supporting the concept that apo-Fur repressed genes can be considered oxidation inducible Fur regulatory targets. These findings may have important implications in the study of H. pylori treatment and resistance to

  6. 77 FR 57043 - Regulations Under the Fur Products Labeling Act

    Science.gov (United States)

    2012-09-17

    ... kept for farming purposes. The Convention aims to protect animals against any unnecessary suffering or... on purportedly superior European fur-farming practices, which can change and which the Commission... Vulpes lagopus. Goat Artiodactyla Bovidae Capra hircus. Jaguar ......do Felidae Panthera onca. Jaguarundi...

  7. Litter size, fur quality and genetic analyses of American mink

    DEFF Research Database (Denmark)

    Thirstrup, Janne Pia

    of the skin, have been analyzed. Both fur quality traits and litter size are complex traits underlying quantitative genetic variation. Methods for estimating genetic variance, spanning from pedigree information to the use of different genetic markers, have been utilized in order to gain knowledge about...

  8. Rotary plug seal

    International Nuclear Information System (INIS)

    Ito, Koji; Abiko, Yoshihiro.

    1981-01-01

    Purpose: To enable fuel exchange even upon failure of regular seals and also to enable safety seal exchange by the detection of the reduction in the contact pressure of a rotary plug seal. Constitution: If one of a pair of regular tube seals for the rotary plug is failed during ordinary operation of a FBR type reactor, the reduction in the contact pressure of the seal to the plug gibbousness is detected by a pressure gauge and a solenoid valve is thereby closed. Thus, a back-up-tube seal provided above or below the tube seal is press-contacted by way of argon gas to the gibbousness to enter into operation state and lubricants are supplied from an oil tank. In such a structure, the back-up-tube seal is operated before the failure of the tube seal to enable to continue the fuel exchange work, as well as safety exchange for the tube seal. (Moriyama, K.)

  9. Seal design alternatives study

    International Nuclear Information System (INIS)

    Van Sambeek, L.L.; Luo, D.D.; Lin, M.S.; Ostrowski, W.; Oyenuga, D.

    1993-06-01

    This report presents the results from a study of various sealing alternatives for the WIPP sealing system. Overall, the sealing system has the purpose of reducing to the extent possible the potential for fluids (either gas or liquid) from entering or leaving the repository. The sealing system is divided into three subsystems: drift and panel seals within the repository horizon, shaft seals in each of the four shafts, and borehole seals. Alternatives to the baseline configuration for the WIPP seal system design included evaluating different geometries and schedules for seal component installations and the use of different materials for seal components. Order-of-magnitude costs for the various alternatives were prepared as part of the study. Firm recommendations are not presented, but the advantages and disadvantages of the alternatives are discussed. Technical information deficiencies are identified and studies are outlined which can provide required information

  10. Mechanical seal assembly

    Science.gov (United States)

    Kotlyar, Oleg M.

    2001-01-01

    An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transferring it to the mechanical diode.

  11. Mechanical Seal Assembly

    Energy Technology Data Exchange (ETDEWEB)

    Kotlyar, Oleg M.

    1999-06-18

    An improved mechanical seal assembly is provided for sealing rotating shafts with respect to their shaft housings, wherein the rotating shafts are subject to substantial axial vibrations. The mechanical seal assembly generally includes a rotating sealing ring fixed to the shaft, a non-rotating sealing ring adjacent to and in close contact with the rotating sealing ring for forming an annular seal about the shaft, and a mechanical diode element that applies a biasing force to the non-rotating sealing ring by means of hemispherical joint. The alignment of the mechanical diode with respect to the sealing rings is maintained by a series of linear bearings positioned axially along a desired length of the mechanical diode. Alternative embodiments include mechanical or hydraulic amplification components for amplifying axial displacement of the non-rotating sealing ring and transferring it to the mechanical diode.

  12. The cestode community in northern fur seals (Callorhinus ursinus) on St. Paul Island, Alaska

    Czech Academy of Sciences Publication Activity Database

    Kuzmina, T.A.; Hernández-Orts, Jesús S.; Lyons, E.T.; Spraker, T.R.; Kornyushyn, V.V.; Kuchta, Roman

    2015-01-01

    Roč. 4, č. 2 (2015), s. 256-263 ISSN 2213-2244 R&D Projects: GA ČR GAP506/12/1632 Institutional support: RVO:60077344 Keywords : Adenocephalus pacificus (Diphyllobothrium pacificum) * Anophryocephalus cf. ochotensis * Cestoda * Diphyllobothridea * Diplogonoporus tetrapterus * Otariidae, North Pacific * Tapeworms * Tetrabothriidea Subject RIV: EG - Zoology

  13. 77 FR 41168 - Marine Mammals; Subsistence Taking of Northern Fur Seals; St. Paul Island

    Science.gov (United States)

    2012-07-12

    ... Administrative Procedure Act (APA). The Pribilof Island Community of St. Paul Island, Aleut Community of St. Paul... comment on from the resulting list and click on the ``Submit a Comment'' icon on the right of that line... Adobe PDF file formats only. Information related to the request for rulemaking is available on the...

  14. Northern fur seal foraging strategies, Bogoslof and St. Paul Islands 2004-2006

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data are part of North Pacific Research Board Project 414 and Project 514. Project 514 provided a second year of data collection to the study detailed in Banks...

  15. Kelp gulls prey on the eyes of juvenile Cape fur seals in Namibia ...

    African Journals Online (AJOL)

    The kelp gull Larus dominicanus is an abundant and highly successful avian predator and scavenger that breeds along the coastline in the Southern Hemisphere, ranging from Antarctica to the tropics. On account of its dietary breadth, wide-ranging foraging strategies, and acclimation to modified landscapes, this species ...

  16. Book Review Fur Seals and Sea Lions By Roger Kirkwood and ...

    African Journals Online (AJOL)

    Australian Natural History Series, CSIRO Publishing, Collingwood, Australia 160 pages, softcover and eBook. ISBN: 9780643096929 (softcover), 9780643109841 (eBook). Price AU$39.95 (softcover); eBook available from various retailers. African Journal of Marine Science 2014, 36(4): 529–530 ...

  17. Numerical anomalies in the dentition of southern fur seals and sea lions (Pinnipedia: Otariidae

    Directory of Open Access Journals (Sweden)

    Carolina Loch

    2010-06-01

    Full Text Available Cases of dental agenesis, supernumerary teeth and dental losses are presented in three species of South American Otariids: Arctocephalus australis (Zimmermann, 1783, A. tropicalis (Gray, 1872 and Otaria flavescens (Shaw, 1800. For the first time, congenital and acquired dental anomalies were comparatively diagnosed in skull samples from southern Brazil and nearby areas. The skulls and mandibles were accessed in the scientific collection of mammals of the Federal University of Santa Catarina, southern Brazil. Agenesis was found only among maxillary post-canine teeth, especially the distal ones (PC/6, due to an evolutionary trend towards reduction of the number of post-canine teeth in this family. Maxillary and mandibular supernumerary teeth were found in A. australis and A. tropicalis, but their positioning is unrelated to cases regarding phylogenetic and evolutionary implications. Dental losses were found in all species and different stages of alveolar obliteration suggest that this process is common in Otariids and does not affect their survival. The investigation of congenital and acquired dental anomalies in pinnipeds can provide information on dental formula evolution in Pinnipeds and in the phylogenetic relationships among Carnivora.

  18. Alaska Steller Sea Lion and Northern Fur Seal Argos Telemetry Data Archive

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Alaska Ecosystems Program of the NOAA Alaska Fisheries Science Center National Marine Mammal Laboratory conducts research and monitoring on Steller sea lions and...

  19. Genital morphology of the male South American fur seal (Arctocephalus australis and biological implications

    Directory of Open Access Journals (Sweden)

    Alex Sander D. Machado

    2012-12-01

    Full Text Available Male capacity for spreading genes to a great number of descendents and to determine population dynamics depend directly on the genital organs. Morphological studies in pinnipeds are scarce and the functional meaning of some characteristics has never been discussed. We hypothesized that Arctocephalus australis (A. australis shows morphophysiological adaptations in order to guarantee the perpetuation of the species in the unique annual mating season. Seven males, dead from natural causes, had their genital organs collected and fixed for morphological description. Some features differ from other described mammalian males and are closely related to the biology and reproductive cycle of this species, as the scrotal epidermis, absence of glandular portion in the ductus deferens and spermatogenic epithelium suggest a recrudescent testis period. The corona glandis exhibits a singular arrangement: its erectile border looks like a formation of petals and its association with the os penis gives a "lily-flower" form to this region. We propose the name margo petaliformis to this particular erectile border of the corona glandis because of its similarity to a flower corola. The male genital organs of A. australis show morphological features compatible with adaptation to environment requirements and reproductive efficiency.

  20. Mechanical seal program

    International Nuclear Information System (INIS)

    Lowery, G.B.

    1983-01-01

    The experimental plans and timing for completion of the mechanical seal program for both the slurry and transfer pumps are given. The slurry pump seal program will be completed by April 1984 with turnover of two seals in pumps to SRP Tank 15H. Transfer pump seal design will be released for plant use by May 1984. Also included are various other pump and seal related tests

  1. SUBANTARCTIC LIMPET POPULATIONS TODAY AND HUMAN IMPACT ABOUT 1,400 YEARS AGO

    OpenAIRE

    Thatje,Sven; Ríos,Carlos

    2010-01-01

    Age, growth and length frequency data of the subantarctic intertidal limpets Nacella (Patinigera) magellanica and Nacella (Patinigera) deaurata (gmelin, 1791) were investigated at Bahía Laredo in the eastern part of the Straits of Magellan (South america). data were obtained from (i) recent populations and (ii) from shells of the same species, excavated from an indian tribe kitchen midden nearby. Conventional 14C age determination showed the shells of both limpet-species from this midden to b...

  2. Ferocia gen. nov., a new centric diatom genus (Bacillariophyceae) from the sub-Antarctic region

    Czech Academy of Sciences Publication Activity Database

    Van de Vijver, B.; Chattová, B.; Lebouvier, M.; Houk, Václav

    2017-01-01

    Roč. 332, č. 1 (2017), s. 22-30 ISSN 1179-3155 R&D Projects: GA ČR GA205/05/0204 Institutional research plan: CEZ:AV0Z60050516 Institutional support: RVO:67985939 Keywords : centric diatoms * new genus * Melosira * Ferocia * sub-Antarctic Region Subject RIV: EF - Botanics OBOR OECD: Plant sciences, botany Impact factor: 1.240, year: 2016

  3. Fur Trade Era Interpretation. The Voyageur Sash and Garter and a Fur Trade Emblem: A Curiosity Ripe for Interpretation.

    Science.gov (United States)

    Davis, Wendy; Henderson, Bob

    1998-01-01

    Provides outdoor educators with background information for historical interpretation activities during Canadian canoe trips. Discusses the history, evolution, and uses of brightly colored sashes and garters worn by voyageurs during the fur trade era, and speculates on the origins of the Lauburu canoe emblem, used by both the Mic Mac peoples and…

  4. Biological response to millennial variability of dust and nutrient supply in the Subantarctic South Atlantic Ocean.

    Science.gov (United States)

    Anderson, Robert F; Barker, Stephen; Fleisher, Martin; Gersonde, Rainer; Goldstein, Steven L; Kuhn, Gerhard; Mortyn, P Graham; Pahnke, Katharina; Sachs, Julian P

    2014-07-13

    Fluxes of lithogenic material and fluxes of three palaeo-productivity proxies (organic carbon, biogenic opal and alkenones) over the past 100,000 years were determined using the (230)Th-normalization method in three sediment cores from the Subantarctic South Atlantic Ocean. Features in the lithogenic flux record of each core correspond to similar features in the record of dust deposition in the EPICA Dome C ice core. Biogenic fluxes correlate with lithogenic fluxes in each sediment core. Our preferred interpretation is that South American dust, most probably from Patagonia, constitutes a major source of lithogenic material in Subantarctic South Atlantic sediments, and that past biological productivity in this region responded to variability in the supply of dust, probably due to biologically available iron carried by the dust. Greater nutrient supply as well as greater nutrient utilization (stimulated by dust) contributed to Subantarctic productivity during cold periods, in contrast to the region south of the Antarctic Polar Front (APF), where reduced nutrient supply during cold periods was the principal factor limiting productivity. The anti-phased patterns of productivity on opposite sides of the APF point to shifts in the physical supply of nutrients and to dust as cofactors regulating productivity in the Southern Ocean. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

  5. Nuclear reactor sealing system

    International Nuclear Information System (INIS)

    McEdwards, J.A.

    1983-01-01

    A liquid metal-cooled nuclear reactor sealing system is disclosed. The nuclear reactor includes a vessel sealed at its upper end by a closure head. The closure head comprises at least two components, one of which is rotatable; and the two components define an annulus therebetween. The sealing system includes at least a first and second inflatable seal disposed in series in an upper portion of the annulus. The system further includes a dip seal extending into a body of insulation located adjacent a bottom portion of the closure head. The dip seal comprises a trough formed by a lower portion of one of the components, and a seal blade pendently supported from the other component and extending downwardly into the trough. A body of liquid metal is contained in the trough which submerges a portion of the seal blade. The seal blade is provided with at least one aperture located above the body of liquid metal for providing fluid communication between the annulus intermediate the dip seal and the inflatable seals, and a body of cover gas located inside the vessel. There also is provided means for introducing a purge gas into the annulus intermediate the inflatable seals and the seal blade. The purge gas is introduced in an amount sufficient to substantially reduce diffusion of radioactive cover gas or sodium vapor up to the inflatable seals. The purge gas mixes with the cover gas in the reactor vessel where it can be withdrawn from the vessel for treatment and recycle to the vessel

  6. Iron fertilization of the Subantarctic Ocean during the last ice age

    Science.gov (United States)

    Martinez-Garcia, A.

    2015-12-01

    Dust has the potential to modify global climate by influencing the radiative balance of the atmosphere and by supplying iron and other essential limiting micronutrients to the ocean. The scarcity of iron limits marine productivity and carbon uptake in one-quarter of the world ocean where the concentration of major nutrients (phosphorus and nitrogen) is perennially high. The Southern Ocean is the region where variations in iron availability can have the largest effect on Earth's carbon cycle through its fertilizing effect on marine ecosystems. Paleoceanographic records from the Subantarctic Atlantic have revealed a remarkable correlation between phytoplankton productivity and aeolian iron flux during glacial periods supporting the iron fertilization hypothesis. In addition, a recent study has shown that peak glacial times and millennial cold events were nearly universally associated not only with increases in dust flux and export production, but also with an increase in nutrient consumption (the last indicated by higher foraminifera-bound δ15N) (Martinez-Garcia et al. 2014). This combination of changes is uniquely consistent with ice age iron fertilization of the Subantarctic Atlantic. The strengthening of the biological pump associated with the observed increase in Subantarctic nutrient consumption during the high-dust intervals of the last two ice ages can explain up to ~40 ppm of the CO2 decrease that characterizes the transitions from mid-climate states to full ice age conditions. However, the impact of iron fertilization in other sectors of the Southern Ocean characterized by lower ice age dust fluxes than the Atlantic remains unclear. A series of recently published records from the Subantarctic Pacific indicate that dust deposition and marine export production were three times higher during glacial periods than during interglacials (Lamy et al. 2014). Here we present new measurements of foraminifera-bound nitrogen isotopes in a sediment core located in the

  7. Inboard seal mounting

    Science.gov (United States)

    Hayes, John R. (Inventor)

    1983-01-01

    A regenerator assembly for a gas turbine engine has a hot side seal assembly formed in part by a cast metal engine block having a seal recess formed therein that is configured to supportingly receive ceramic support blocks including an inboard face thereon having a regenerator seal face bonded thereto. A pressurized leaf seal is interposed between the ceramic support block and the cast metal engine block to bias the seal wear face into sealing engagement with a hot side surface of a rotary regenerator matrix.

  8. Mortality among retired fur workers. Dyers, dressers (tanners) and service workers

    Energy Technology Data Exchange (ETDEWEB)

    Sweeney, M.H.; Walrath, J.; Waxweiler, R.J.

    1985-08-01

    A retrospective cohort mortality study was conducted on 807 fur dyers, fur dressers (tanners), and fur service workers who were pensioned between 1952 and 1977 by the Fur, Leather and Machine Workers Union of New York City. Workplace exposures of fur workers varied with job category. Dyers were exposed to oxidative dyes used in commercial hair dyes; dressers and service workers were exposed to tanning chemicals. In a comparison with the New York City population, no significant increases in mortality were observed among the fur dyers. Among fur dressers, mortality from all malignant neoplasms and lung cancer was significantly elevated, as was mortality from cardiovascular disease among fur service workers. When examined by ethnic origin, the elevated SMR values and directly age-adjusted rate ratios suggested that foreign-born fur dressers and eastern European-born fur workers experienced the highest risks for lung and colorectal cancers, respectively. These data support previous findings of increased mortality from colorectal cancer in the foreign-born population of the United States and suggest a possible occupational etiology for the observed lung cancer excess.

  9. Mortality among retired fur workers. Dyers, dressers (tanners) and service workers.

    Science.gov (United States)

    Sweeney, M H; Walrath, J; Waxweiler, R J

    1985-08-01

    A retrospective cohort mortality study was conducted on 807 fur dyers, fur dressers (tanners), and fur service workers who were pensioned between 1952 and 1977 by the Fur, Leather and Machine Workers Union of New York City. Workplace exposures of fur workers varied with job category. Dyers were exposed to oxidative dyes used in commercial hair dyes; dressers and service workers were exposed to tanning chemicals. In a comparison with the New York City population, no significant increases in mortality were observed among the fur dyers. Among fur dressers, mortality from all malignant neoplasms [standardized mortality ratio (SMR) 151] and lung cancer (SMR 232) was significantly elevated, as was mortality from cardiovascular disease (SMR 126) among fur service workers. When examined by ethnic origin, the elevated SMR values and directly age-adjusted rate ratios suggested that foreign-born fur dressers and eastern European-born fur workers experienced the highest risks for lung and colorectal cancers, respectively. These data support previous findings of increased mortality from colorectal cancer in the foreign-born population of the United States and suggest a possible occupational etiology for the observed lung cancer excess.

  10. Analysis of a Ferric Uptake Regulator (Fur) Mutant ofDesulfovibrio vulgaris Hildenborough

    Energy Technology Data Exchange (ETDEWEB)

    Bender, Kelly S.; Yen, Huei-Che Bill; Hemme, Christopher L.; Yang, Zamin K.; He, Zhili; He, Qiang; Zhou, Jizhong; Huang, Katherine H.; Alm, Eric J.; Hazen, Terry C.; Arkin, Adam P.; Wall, Judy D.

    2007-09-21

    Previous experiments examining the transcriptional profileof the anaerobe Desulfovibrio vulgaris demonstrated up-regulation of theFur regulon in response to various environmental stressors. To test theinvolvement of Fur in the growth response and transcriptional regulationof D. vulgaris, a targeted mutagenesis procedure was used for deletingthe fur gene. Growth of the resulting ?fur mutant (JW707) was notaffected by iron availability, but the mutant did exhibit increasedsensitivity to nitrite and osmotic stresses compared to the wild type.Transcriptional profiling of JW707 indicated that iron-bound Fur acts asa traditional repressor for ferrous iron uptake genes (feoAB) and othergenes containing a predicted Fur binding site within their promoter.Despite the apparent lack of siderophore biosynthesis genes within the D.vulgaris genome, a large 12-gene operon encoding orthologs to TonB andTolQR also appeared to be repressed by iron-bound Fur. While other genespredicted to be involved in iron homeostasis were unaffected by thepresence or absence of Fur, alternative expression patterns that could beinterpreted as repression or activation by iron-free Fur were observed.Both the physiological and transcriptional data implicate a globalregulatory role for Fur in the sulfate-reducing bacterium D.vulgaris.

  11. 50 CFR 23.69 - How can I trade internationally in fur skins and fur skin products of bobcat, river otter, Canada...

    Science.gov (United States)

    2010-10-01

    ... Section 23.69 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR... serial number. (3) Fur skins with broken, cut, or missing tags may not be exported. Replacement tags must... show that the fur was legally acquired. (i) When a tag is broken, cut, or missing, you may contact the...

  12. Joint competition – the world dominance of Danish fur production

    DEFF Research Database (Denmark)

    Christensen, Jesper Lindgaard

    2010-01-01

    Low-tech industries provide a substantial contribution to the Western economies and there is a growing literature that criticizes the over-emphasis both policies and economic analyses often put on high-tech industries. Clusters have been pointed to as instrumental for small firms in meeting...... the challenges of a globalised, knowledge-based economy because they are known to have deeper specialization, which in turn is seen as a prerequisite for constructing comparative advantages and industrial strongholds. The paper takes the point of departure in the Danish fur production and an agglomeration...... of production of mink/furs in North/North-Western Jutland, Denmark. This industry has been by far the major producer in the world with a large world market share. Two paradoxes needs to be explained: the world dominance of a low-tech, labour intensive sector by a small, high-income/high-wage, high-tech country...

  13. Nuclear waste vault sealing

    International Nuclear Information System (INIS)

    Gyenge, M.

    1980-01-01

    A nuclear waste vault must be designed and built to ensure adequate isolation of the nuclear wastes from human contact. Consequently, after a vault has been fully loaded, it must be adequately sealed off to prevent radionuclide migration which may be provided by circulating groundwater. Vault sealing entails four major aspects, i.e.: (a) vault grouting; (b) borehole sealing; (c) buffer packing; and (d) backfilling. Of particular concern in vault sealing are the physical and chemical properties of the sealing material, its long-term durability and stability, and the techniques used for its emplacement. Present sealing technology and sealing materials are reviewed in terms of the particular needs of vault sealing. Areas requiring research and development are indicated

  14. Reactor vessel sealing plug

    International Nuclear Information System (INIS)

    Dooley, R.A.

    1986-01-01

    This invention relates to an apparatus and method for sealing the cold leg nozzles of a nuclear reactor pressure vessel from a remote location during maintenance and inspection of associated steam generators and pumps while the pressure vessel and refueling canal are filled with water. The apparatus includes a sealing plug for mechanically sealing the cold leg nozzle from the inside of a reactor pressure vessel. The sealing plugs include a primary and a secondary O-ring. An installation tool is suspended within the reactor vessel and carries the sealing plug. The tool telescopes to insert the sealing plug within the cold leg nozzle, and to subsequently remove the plug. Hydraulic means are used to activate the sealing plug, and support means serve to suspend the installation tool within the reactor vessel during installation and removal of the sealing plug

  15. Fog seal guidelines.

    Science.gov (United States)

    2003-10-01

    Fog seals are a method of adding asphalt to an existing pavement surface to improve sealing or waterproofing, prevent further stone loss by holding aggregate in place, or simply improve the surface appearance. However, inappropriate use can result in...

  16. Hermetically Sealed Compressor

    Science.gov (United States)

    Holtzapple, Mark T.

    1994-01-01

    Proposed hermetically sealed pump compresses fluid to pressure up to 4,000 atm (400 MPa). Pump employs linear electric motor instead of rotary motor to avoid need for leakage-prone rotary seals. In addition, linear-motor-powered pump would not require packings to seal its piston. Concept thus eliminates major cause of friction and wear. Pump is double-ended diaphragm-type compressor. All moving parts sealed within compressor housing.

  17. Investigation of positive shaft seals

    Science.gov (United States)

    Pfouts, J. O.

    1970-01-01

    Welded metal bellows secondary seals prevent secondary seal leakage with a minimum number of potential leak paths. High performance seal is obtained by controlling the potentially unstable seal-face movements induced by mechanical vibrations and fluid pressure pulsations.

  18. Circumferential shaft seal

    Science.gov (United States)

    Ludwig, L. P. (Inventor)

    1981-01-01

    A circumferential shaft seal comprising two sealing rings held to a rotating shaft by means of a surrounding elastomeric band is disclosed. The rings are segmented and are of a rigid sealing material such as carbon or a polyimide and graphite fiber composite.

  19. Seals in motion

    NARCIS (Netherlands)

    Brasseur, Sophie Marie Jacqueline Michelle

    2017-01-01

    The harbour seal Phoca vitulina and the grey seal Halichoerus grypus have been inhabitants of the Wadden Sea since millennia. Prehistoric findings indicate the presence of both species around 5000 BC. This changed dramatically in the mid Middle-Ages as around 1500 AC, the grey seal disappeared from

  20. Electronic self-monitoring seal

    International Nuclear Information System (INIS)

    Campbell, J.W.

    1978-01-01

    The Electronic Self-Monitoring Seal is a new type of security seal which allows continuous verification of the seal's identity and status. The identity information is a function of the individual seal, time, and seal integrity. A description of this seal and its characteristics are presented. Also described are the use cycle for the seal and the support equipment for programming and verifying the seal

  1. Sub-Antarctic marine aerosol: dominant contributions from biogenic sources

    Directory of Open Access Journals (Sweden)

    J. Schmale

    2013-09-01

    Full Text Available Biogenic influences on the composition and characteristics of aerosol were investigated on Bird Island (54°00' S, 38°03' W in the South Atlantic during November and December 2010. This remote marine environment is characterised by large seabird and seal colonies. The chemical composition of the submicron particles, measured by an aerosol mass spectrometer (AMS, was 21% non-sea-salt sulfate, 2% nitrate, 8% ammonium, 22% organics and 47% sea salt including sea salt sulfate. A new method to isolate the sea spray signature from the high-resolution AMS data was applied. Generally, the aerosol was found to be less acidic than in other marine environments due to the high availability of ammonia, from local fauna emissions. By positive matrix factorisation five different organic aerosol (OA profiles could be isolated: an amino acid/amine factor (AA-OA, 18% of OA mass, a methanesulfonic acid OA factor (MSA-OA, 25%, a marine oxygenated OA factor (M-OOA, 41%, a sea spray OA fraction (SS-OA, 7% and locally produced hydrocarbon-like OA (HOA, 9%. The AA-OA was dominant during the first two weeks of November and found to be related with the hatching of penguins in a nearby colony. This factor, rich in nitrogen (N : C ratio = 0.13, has implications for the biogeochemical cycling of nitrogen in the area as particulate matter is often transported over longer distances than gaseous N-rich compounds. The MSA-OA was mainly transported from more southerly latitudes where phytoplankton bloomed. The bloom was identified as one of three sources for particulate sulfate on Bird Island, next to sea salt sulfate and sulfate transported from South America. M-OOA was the dominant organic factor and found to be similar to marine OA observed at Mace Head, Ireland. An additional OA factor highly correlated with sea spray aerosol was identified (SS-OA. However, based on the available data the type of mixture, internal or external, could not be determined. Potassium was not

  2. Percentage Level of Tannin fur Rabbit for Leather Concerning Stitch Tearing Strength, Tearing Strength and Flexibility

    OpenAIRE

    Mustakim Mustakim; Aris Sri Widati; Lisa Purnaningtyas

    2012-01-01

    The purpose of this study was to find out the appropriate of tannin level for rabbit fur leather concerning stitch tearing strength, tearing strength, and flexibility. The result were expected to contribute good information for the society, leather craftsman, and further researchers about fur leather tanning especially rabbit fur leather with tannin concerning stitch tearing strength, tearing strength and flexibility. The material that used were 12 pieces of four months of rabbit skin. The re...

  3. VAK III. Seals and sealing system

    International Nuclear Information System (INIS)

    d'Agraives, B.C.; Dal Cero, G.; Debeir, R.; Mascetti, E.; Toornvliet, J.; Volcan, A.

    1986-01-01

    This report presents the VAK III seals and sealing system, which have been used over a period of two years at the Kahl nuclear facility (Federal Republic of Germany), where field tests and feasibility studies were conducted in order to offer a possible solution for the sealing of LWR fuel assemblies. It has been prepared with the aim of an assessment study to be done at the IAEA. It gives all characteristics and technical descriptions for: the sealing principle, the seal construction, the operating tools, the data processing, the drawings, the publications related to that seal. The main points of progress are: the Strong Random Internal Defects (STRID) incorporated in the seals, allowing the obtention of a good signature stability; the Integrity Check on the Seal Status (broken or not) obtained through a decisive mechanical improvement: the Double Breakage Integrity Check (DOBRIC) and with a better ultrasonic evidence of that status; the provision of new function tools, allowing the performance of Identity Measurements in dry conditions (which means also at the manufacturer plant) or in deeper water (wet storage); the study and development of a new JRC VAK 45 Compact Instrument Box, in which all the measuring functions can be grouped and incorporating an autonomous Minicomputer offering to the Inspection the possibility of performing, on the spot, Correlation and Decision processes. The general benefit of such a feasibility study should be to convince the potential users that such a Safeguards Sealing System can be studied for slightly - or largely - different other applications, provided that the Basic and Operating Functions required to the system be clearly defined, possibly after a common agreement would be stated

  4. Reinforced seal component

    International Nuclear Information System (INIS)

    Jeanson, G.M.; Odent, R.P.

    1980-01-01

    The invention concerns a seal component of the kind comprising a soft sheath and a flexible reinforcement housed throughout the entire length of the sheath. The invention enables O ring seals to be made capable of providing a radial seal, that is to say between two sides or flat collars of two cylindrical mechanical parts, or an axial seal, that is to say between two co-axial axisymmetrical areas. The seal so ensured is relative, but it remains adequately sufficient for many uses, for instance, to ensure the separation of two successive fixed blading compartments of axial compressors used in gas diffusion isotope concentration facilities [fr

  5. The IRES electronic seal

    International Nuclear Information System (INIS)

    Autrusson, B.; Brochard, D.; Moreau, J.F.; Martin, J.C.

    2001-01-01

    In the framework of the French Support Program for the IAEA Safeguards, the 'Institut de Protection et de Surete Nucleaire' (IPSN), developed an electronic seal called Integrated and Reusable Electronic Seal (IRES) that enables independent verification by different inspectorates (IAEA, Euratom, and National Inspectorate). The seal can be remotely interrogated by radio frequency and integrated to other Containment/surveillance systems by serial line RS 485. Data are authenticated and the IRESMAG software manages in the seal reader all functionalities of the seal and records inspection data compatible with the IAEA's Seal Database. To perform this development, IPSN relies on industrial partners: SAPHYMO for the general architecture of the seal and the electronics, THALES for the authentication of data and the security of transmission. The main features of the IRES seal are the following: Interrogation by different inspectorate, allowing independent conclusions; Recording of events, including tampering, in a non-volatile memory; Authentication of data and enhanced security of the communication between the seal and the seal reader; Remote interrogation by an inspector or/and automatic for unattended systems or remote monitoring; Reusable after erasing the seal memory and replacement of the batteries

  6. Severe service sealing solutions

    International Nuclear Information System (INIS)

    Metcalfe, R.; Wensel, R.

    1994-09-01

    Successful sealing usually requires much more than initial leak-tightness. Friction and wear must also be acceptable, requiring a good understanding of tribology at the sealing interface. This paper describes various sealing solutions for severe service conditions. The CAN2A and CAN8 rotary face seals use tungsten carbide against carbon-graphite to achieve low leakage and long lifetime in nuclear main coolant pumps. The smaller CAN6 seal successfully uses tungsten carbide against silicon carbide in reactor water cleanup pump service. Where friction in CANDU fuelling machine rams must be essentially zero, a hydrostatic seal using two silicon carbide faces is the solution. In the NRU reactor moderator pumps, where pressure is much lower, eccentric seals that prevent boiling at the seal faces are giving excellent service. All these rotary face seals rely on supplementary elastomer seals between their parts. An integrated engineering approach to high performance sealing with O-rings is described. This is epitomized in critical Space Shuttle applications, but is increasingly being applied in CANDU plants. It includes gland design, selection and qualification of material, quality assurance, detection of defects and the effects of lubrication, surface finish, squeeze, stretch and volume constraints. In conclusion, for the severe service applications described, customized solutions have more than paid for themselves by higher reliability, lower maintenance requirements and reduced outage time. (author)

  7. Late Glacial and Holocene Climate Change in the subantarctic Auckland Islands

    Science.gov (United States)

    Gilmer, G.; Moy, C. M.; Vandergoes, M.; Gadd, P.; Riesselman, C. R.; Jacobsen, G. E.; Wilson, G. S.; Visinand, C.

    2017-12-01

    Situated within the core of the Southern Hemisphere westerly winds, and between the subtropical and subantarctic fronts, the New Zealand subantarctic islands are uniquely positioned to evaluate past ocean and atmospheric change in the middle to high southern latitudes. We collected a series of sediment cores from Auckland Island fjords to produce a high-resolution record of climate change following the Last Glacial Maximum. Physical property and organic geochemical data, Itrax XRF, and visual core descriptions indicate the cores capture several phases of sedimentation. From these studies, we identify four primary sedimentary facies: 1) a deglacial facies exhibiting mm-scale laminae defined by magnetic susceptibility and density contrasts and high counts of elements associated with terrigenous sources; 2) a lacustrine facies defined by very low density, high organic carbon concentrations and low counts of lithophilic elements; 3) a marine transgression facies with moderate density, moderate bioturbation and alternating marine and lacustrine sedimentary components; 4) a marine facies that contains biogenic carbonate. Radiocarbon results indicate deglacial sedimentation was underway in the basin by approximately 19,000 cal yr BP. Lacustrine deposition in ice-free conditions began around 15,600 cal yr BP and continued until marine transgression at approximately 9,500 cal yr BP. During the early Holocene between 11 and 9.5 ka, we observe elevated n-alkane δD values and an overall increase in redox-sensitive elements that signal a combination of warmer atmospheric temperatures and reduced westerly wind strength that drives fjord stratification. Poleward-shifted westerlies south of the Auckland Islands could accommodate these results, but there are few records to corroborate this interpretation. We will discuss these results within the context of developing New Zealand and subantarctic paleoclimate records in order to provide a more comprehensive record of past change.

  8. The IRES electronic seal

    International Nuclear Information System (INIS)

    Gourlez, P.; Funk, P.; Brochard, D.; Moreau, J.F.; Martin, J.C.

    2001-01-01

    In the framework of the French Support Program for the IAEA Safeguards, the 'Institut de Protection et de Surete Nucleaire' (IPSN), developed an electronic seal called Integrated and Reusable Electronic Seal (IRES) that enables independent verification by different inspectorates (IAEA, Euratom, and National Inspectorate) Furthermore, a bilateral co-ordination between Euratom and French domestic safeguards takes place in some French facilities regarding a common approach concerning the seals especially in case of crisis situation. The seal can be remotely interrogated by radio frequency and integrated to other Containment/surveillance systems by serial line RS 485. Data are authenticated and the IRESMAG software manages in the seal reader all functionalities of the seal and records inspection data compatible with the IAEA's Seal Database

  9. High pressure shaft seal

    International Nuclear Information System (INIS)

    Martinson, A.R.; Rogers, V.D.

    1980-01-01

    In relation to reactor primary coolant pumps, mechanical seal assembly for a pump shaft is disclosed which features a rotating seal ring mounting system which utilizes a rigid support ring loaded through narrow annular projections in combination with centering non-sealing O-rings which effectively isolate the rotating seal ring from temperature and pressure transients while securely positioning the ring to adjacent parts. A stationary seal ring mounting configuration allows the stationary seal ring freedom of motion to follow shaft axial movement up to 3/4 of an inch and shaft tilt about the pump axis without any change in the hydraulic or pressure loading on the stationary seal ring or its carrier. (author)

  10. Brucella Antibodies in Alaskan True Seals and Eared Seals—Two Different Stories

    Directory of Open Access Journals (Sweden)

    Ingebjørg H. Nymo

    2018-01-01

    Full Text Available Brucella pinnipedialis was first isolated from true seals in 1994 and from eared seals in 2008. Although few pathological findings have been associated with infection in true seals, reproductive pathology including abortions, and the isolation of the zoonotic strain type 27 have been documented in eared seals. In this study, a Brucella enzyme-linked immunosorbent assay (ELISA and the Rose Bengal test (RBT were initially compared for 206 serum samples and a discrepancy between the tests was found. Following removal of lipids from the serum samples, ELISA results were unaltered while the agreement between the tests was improved, indicating that serum lipids affected the initial RBT outcome. For the remaining screening, we used ELISA to investigate the presence of Brucella antibodies in sera of 231 eared and 1,412 true seals from Alaskan waters sampled between 1975 and 2011. In eared seals, Brucella antibodies were found in two Steller sea lions (Eumetopias jubatus (2% and none of the 107 Northern fur seals (Callorhinus ursinus. The low seroprevalence in eared seals indicate a low level of exposure or lack of susceptibility to infection. Alternatively, mortality due to the Brucella infection may remove seropositive animals from the population. Brucella antibodies were detected in all true seal species investigated; harbor seals (Phoca vitulina (25%, spotted seals (Phoca largha (19%, ribbon seals (Histriophoca fasciata (16%, and ringed seals (Pusa hispida hispida (14%. There was a low seroprevalence among pups, a higher seroprevalence among juveniles, and a subsequent decreasing probability of seropositivity with age in harbor seals. Similar patterns were present for the other true seal species; however, solid conclusions could not be made due to sample size. This pattern is in accordance with previous reports on B. pinnipedialis infections in true seals and may suggest environmental exposure to B. pinnipedialis at the juvenile stage, with a

  11. Flexible ring seal

    International Nuclear Information System (INIS)

    Abbes, Claude; Gournier, Andre; Rouaud, Christian; Villepoix, Raymond de.

    1976-01-01

    The invention concerns a flexible metal ring seal, able to ensure a perfect seal between two bearings due to the crushing and elastic deformation properties akin to similar properties in elastomers. Various designs of seal of this kind are already known, particularly a seal made of a core formed by a helical wire spring with close-wound turns and with high axial compression ratio, closed on itself and having the shape of an annulus. This wire ring is surrounded by at least one envelope having at rest the shape of a toroidal surface of which the generating circle does not close on itself. In a particular design mode, the seal in question can include, around the internal spring, two envelopes of which one in contact with the spring is composed of a low ductility elastic metal, such as mild steel or stainless steel and the other is, on the contrary, made of a malleable metal, such as copper or nickel. The first envelope evenly distributes the partial crushing of the spring, when the seal is tightened, on the second envelope which closely fits the two surfaces between which the seal operates. The stress-crushing curve characteristic of the seal comprises two separate parts, the first with a relatively sharp slope corresponds to the start of the seal compression phase, enabling at least some of these curves to reach the requisite seal threshold very quickly, then, beyond this, a second part, practically flat, where the stress is appreciably constant for a wide operating bracket [fr

  12. A single nucleotide change affects fur-dependent regulation of sodB in H. pylori.

    Directory of Open Access Journals (Sweden)

    Beth M Carpenter

    Full Text Available Helicobacter pylori is a significant human pathogen that has adapted to survive the many stresses found within the gastric environment. Superoxide Dismutase (SodB is an important factor that helps H. pylori combat oxidative stress. sodB was previously shown to be repressed by the Ferric Uptake Regulator (Fur in the absence of iron (apo-Fur regulation [1]. Herein, we show that apo regulation is not fully conserved among all strains of H. pylori. apo-Fur dependent changes in sodB expression are not observed under iron deplete conditions in H. pylori strains G27, HPAG1, or J99. However, Fur regulation of pfr and amiE occurs as expected. Comparative analysis of the Fur coding sequence between G27 and 26695 revealed a single amino acid difference, which was not responsible for the altered sodB regulation. Comparison of the sodB promoters from G27 and 26695 also revealed a single nucleotide difference within the predicted Fur binding site. Alteration of this nucleotide in G27 to that of 26695 restored apo-Fur dependent sodB regulation, indicating that a single base difference is at least partially responsible for the difference in sodB regulation observed among these H. pylori strains. Fur binding studies revealed that alteration of this single nucleotide in G27 increased the affinity of Fur for the sodB promoter. Additionally, the single base change in G27 enabled the sodB promoter to bind to apo-Fur with affinities similar to the 26695 sodB promoter. Taken together these data indicate that this nucleotide residue is important for direct apo-Fur binding to the sodB promoter.

  13. Diatom and silicoflagellate biostratigraphy for the late Eocene: ODP 1090 (sub-Antarctic Atlantic)

    Science.gov (United States)

    Barron, John A.; Bukry, David B.; Gersonde, Rainer

    2014-01-01

    Abundant and well-preserved diatoms and silicofl agellate assemblages are documented through a complete late Eocene sequence, ODP Hole 1090B, recovered from the southern Agulhas Ridge in the sub-Antarctic South Atlantic. A sequence of Cestodiscus (diatom) species occurrence events involving C. pulchellus var. novazealandica, C. fennerae, C. antarcticus, C. convexus, C. trochus, and C. robustus is tied with paleomagnetic stratigraphy and provides the basis of proposing a new diatom zonation for the latest middle Eocene to early Oligocene (~37.6–33.4 Ma) of the sub-Antarctic South Atlantic. Comparison with previously published diatom occurrence charts suggested this zonation should be applicable throughout the low latitude regions of the world’s oceans. Silicofl agellates belong to the Dictyocha hexacantha and the overlying Corbisema apiculata Zones. The late Eocene succession of silicofl agellate species is dominated by Naviculopsis (20–60%). Naviculopsis constricta and N. foliacea dominate the D. hexacantha Zone, followed by the N. constricta, then N. biapiculata in the C. apiculata Zone. Cold-water Distephanus is most abundant in the latest Eocene along with N. biapiculata. The tops of zonal guide fossils Dictyocha hexacantha and Hannaites quadria (both 36.6 Ma) and Dictyocha spinosa (37.1 Ma) are tied with paleomagnetic stratigraphy.

  14. Seals in nuclear reactors

    International Nuclear Information System (INIS)

    1979-01-01

    The seals described are for use in a nuclear reactor where there are fuel assemblies in a vessel, an inlet and an outlet for circulating a coolant in heat transfer relationship with the fuel assemblies and a closure head on the vessel in a tight fluid relationship. The closure head comprises rotatable plugs which have mechanical seals disposed in the annulus around each plug while allowing free rotation of the plug when the seal is not actuated. The seal is usually an elastomer or copper. A means of actuating the seal is attached for drawing it vertically into the annulus for sealing. When the reactor coolant is liquid sodium, contact with oxygen must be avoided and argon cover gas fills the space between the bottom of the closure head and the coolant liquid level and the annuli in the closure head. (U.K.)

  15. Seals in nuclear reactors

    International Nuclear Information System (INIS)

    1979-01-01

    The aim of this invention is the provision of improved seals for reactor vessels in which fuel assemblies are located together with inlets and outlets for the circulation of a coolant. The object is to provide a seal arrangement for the rotatable plugs of nuclear reactor closure heads which has good sealing capacities over a wide gap during operation of the reactor but which also permits uninhibited rotation of the plugs for maintenance. (U.K.)

  16. Compliant seal development

    Science.gov (United States)

    Hendricks, Robert C.

    1993-10-01

    The compliant metallic seal combines the noncontact feature of the labyrinth seal, the low leakage of a mechanical seal, and the compliant nature of the brush seal. It consists of several thin metallic elements or leaves mounted within a ring which is press fit into the housing, and in form, sort of resembles a lip seal sections wiping the shaft. A second set of overlapping cover leaves are placed on top of the shaft riding leaves which reduces leakage and provides stiffness. The leaves can be straight or angle cut. The shaft riding fingers are designed with mismatched curvature to provide lift off similar to the Rayleigh lift pads in mechanical seals with leading edge clearances nearly twice those of the trailing edge as as shown by Fleming to be optimal for gas flows in convergent seal passages. Leading edge clearances range from 300 to 500 microinches. Balance pockets beneath the leaves provide fluid film feed to the 'Rayleigh lift' surface and the proper balance ratio (mechanical seal) when combined with the static pressure and film pressure. The leaves flex in the radial direction and accommodate thermomechanical behavior as well as axial motion and angular misalignment. In the static mode, there is a net closing force on the leaves. The seals were tested to 70 psi at speeds to 16,000 rpm or surface speeds to 330 fps and temperatures from ambient to 440 F. A slow cycle through the rig critical at 10,000 rpm induced a radial vibration response of 0.004 to 0.005 inch were accommodated by the seal. Preliminary performance data are encouraging demonstrating hydrodynamic liftoff and noncontacting operation at pressure and speeds typical of gas turbine engines. The leakage performance data are significantly better than commercial labyrinth and brush seals which should be expected as this design incorporates the features of the low leakage face or mechanical seal along with the flexibility of the brush configuration.

  17. Seal containment system

    International Nuclear Information System (INIS)

    Kugler, R.W.; Gerkey, K.S.; Kasner, W.H.

    1978-01-01

    An automated system for transporting nuclear fuel elements between fuel element assembly stations without contaminating the area outside the sealed assembly stations is described. The system comprises a plurality of assembly stations connected together by an elongated horizontal sealing mechanism and an automatic transport mechanism for transporting a nuclear fuel element in a horizontal attitude between the assembly stations while the open end of the fuel element extends through the sealing mechanism into the assembly station enclosure. The sealing mechanism allows the fuel element to be advanced by the transport mechanism while limiting the escape of radioactive particles from within the assembly station enclosure. 4 claims, 6 figures

  18. Percentage Level of Tannin fur Rabbit for Leather Concerning Stitch Tearing Strength, Tearing Strength and Flexibility

    Directory of Open Access Journals (Sweden)

    Mustakim Mustakim

    2012-02-01

    Full Text Available The purpose of this study was to find out the appropriate of tannin level for rabbit fur leather concerning stitch tearing strength, tearing strength, and flexibility. The result were expected to contribute good information for the society, leather craftsman, and further researchers about fur leather tanning especially rabbit fur leather with tannin concerning stitch tearing strength, tearing strength and flexibility. The material that used were 12 pieces of four months of rabbit skin. The research method was Completely Randomized Design, consist of three treatments of tannin, they were: M1 (mimosa 15%, M2 (mimosa 20%, and M3 (mimosa 25%. Each of treatment hold on four repetition, the variables which measured were stitch tearing strength, tearing strength, and flexibility of fur leather. Data were  analysed by analysis variance followed by Duncan’s Multiple Range Test. The result of this research indicate that the use level of tannin give significant influence (P<0.05 among stitch tearing strength, tearing strength. It gave a very significant influence (P<0.01 for flexibility of rabbit fur leather. Based on the result, can be concluded that 25 % of tannin (mimosa, produce the best  result on stitch tearing strength and tearing strength. The increase of tannin offer will decrease the flexibility of fur leather but the lowest tannin produced the best flexibility of fur leather (15 percent. The best quality of rabbit fur leather produced by 25 % of tannin.   Keywords : leather, tannin, quality

  19. Entanglements of Consumption, Cruelty, Privacy, and Fashion: The Social Controversy over Fur.

    Science.gov (United States)

    Olson, Kathryn M.; Goodnight, G. Thomas

    1994-01-01

    Posits a critical approach to the study of contemporary social controversy. Examines objectives to the use of fur as oppositional argument, rhetoric that veers from the goal of persuasion to block conventional associations and refashion communication norms. Shows how pro-fur responses illustrate strategies available to bolster, alter, or abandon…

  20. Bacillus licheniformis Contains Two More PerR-Like Proteins in Addition to PerR, Fur, and Zur Orthologues.

    Directory of Open Access Journals (Sweden)

    Jung-Hoon Kim

    Full Text Available The ferric uptake regulator (Fur family proteins include sensors of Fe (Fur, Zn (Zur, and peroxide (PerR. Among Fur family proteins, Fur and Zur are ubiquitous in most prokaryotic organisms, whereas PerR exists mainly in Gram positive bacteria as a functional homologue of OxyR. Gram positive bacteria such as Bacillus subtilis, Listeria monocytogenes and Staphylococcus aureus encode three Fur family proteins: Fur, Zur, and PerR. In this study, we identified five Fur family proteins from B. licheniformis: two novel PerR-like proteins (BL00690 and BL00950 in addition to Fur (BL05249, Zur (BL03703, and PerR (BL00075 homologues. Our data indicate that all of the five B. licheniformis Fur homologues contain a structural Zn2+ site composed of four cysteine residues like many other Fur family proteins. Furthermore, we provide evidence that the PerR-like proteins (BL00690 and BL00950 as well as PerRBL (BL00075, but not FurBL (BL05249 and ZurBL (BL03703, can sense H2O2 by histidine oxidation with different sensitivity. We also show that PerR2 (BL00690 has a PerR-like repressor activity for PerR-regulated genes in vivo. Taken together, our results suggest that B. licheniformis contains three PerR subfamily proteins which can sense H2O2 by histidine oxidation not by cysteine oxidation, in addition to Fur and Zur.

  1. Bacillus licheniformis Contains Two More PerR-Like Proteins in Addition to PerR, Fur, and Zur Orthologues

    Science.gov (United States)

    Ju, Shin-Yeong; Yang, Yoon-Mo; Ryu, Su-Hyun; Kwon, Yumi; Won, Young-Bin; Lee, Yeh-Eun; Youn, Hwan; Lee, Jin-Won

    2016-01-01

    The ferric uptake regulator (Fur) family proteins include sensors of Fe (Fur), Zn (Zur), and peroxide (PerR). Among Fur family proteins, Fur and Zur are ubiquitous in most prokaryotic organisms, whereas PerR exists mainly in Gram positive bacteria as a functional homologue of OxyR. Gram positive bacteria such as Bacillus subtilis, Listeria monocytogenes and Staphylococcus aureus encode three Fur family proteins: Fur, Zur, and PerR. In this study, we identified five Fur family proteins from B. licheniformis: two novel PerR-like proteins (BL00690 and BL00950) in addition to Fur (BL05249), Zur (BL03703), and PerR (BL00075) homologues. Our data indicate that all of the five B. licheniformis Fur homologues contain a structural Zn2+ site composed of four cysteine residues like many other Fur family proteins. Furthermore, we provide evidence that the PerR-like proteins (BL00690 and BL00950) as well as PerRBL (BL00075), but not FurBL (BL05249) and ZurBL (BL03703), can sense H2O2 by histidine oxidation with different sensitivity. We also show that PerR2 (BL00690) has a PerR-like repressor activity for PerR-regulated genes in vivo. Taken together, our results suggest that B. licheniformis contains three PerR subfamily proteins which can sense H2O2 by histidine oxidation not by cysteine oxidation, in addition to Fur and Zur. PMID:27176811

  2. Improved cryogenic shaft seals

    Science.gov (United States)

    Gillon, W. A., Jr.; Tellier, G. F.

    1976-01-01

    Seals are designed for use with liquid propellant ball valves at temperatures ranging from -400 F to 130 F and 8,000 psig. Seals are capable of sustaining 90 degree rotation, with substantial amount of lateral and axial play, caused by large pressure loads and differential thermal contraction.

  3. Sealed radioactive sources toolkit

    International Nuclear Information System (INIS)

    Mac Kenzie, C.

    2005-09-01

    The IAEA has developed a Sealed Radioactive Sources Toolkit to provide information to key groups about the safety and security of sealed radioactive sources. The key groups addressed are officials in government agencies, medical users, industrial users and the scrap metal industry. The general public may also benefit from an understanding of the fundamentals of radiation safety

  4. Rotary shaft seal

    International Nuclear Information System (INIS)

    Langebrake, C.O.

    1984-01-01

    The invention is a novel rotary shaft seal assembly which provides positive-contact sealing when the shaft is not rotated and which operates with its sealing surfaces separated by a film of compressed ambient gas whose width is independent of the speed of shaft rotation. In a preferred embodiment, the assembly includes a disc affixed to the shaft for rotation therewith. Axially movable, non-rotatable plates respectively supported by sealing bellows are positioned on either side of the disc to be in sealing engagement therewith. Each plate carries piezoelectric transducer elements which are electrically energized at startup to produce films of compressed ambient gas between the confronting surfaces of the plates and the disc. Following shutdown of the shaft, the transducer elements are de-energized. A control circuit responds to incipient rubbing between the plate and either disc by altering the electrical input to the transducer elements to eliminate rubbing

  5. Sealing a conduit end

    International Nuclear Information System (INIS)

    Mentz, R.M.

    1993-01-01

    An apparatus for sealing or blocking conduits, such as the primary nozzles of a nuclear steam generator is described. It includes an annular bracket sealingly attached to the open end of the nozzle, the bracket having a plurality of threaded holes therein. Mounted atop the bracket is a generally circular nozzle dam for covering the opening. Interposed between the nozzle dam and the bracket is an extrusion-resistant seal member having a plurality of apertures therethrough for receiving each bolt. The seal member is configured to resist extrusion by having laminated layers of differing hardnesses, so that the seal member will not laterally extrude away from each bolt in a manner that enlarges the aperture surrounding each bolt as the nozzle dam is bolted to the bracket. (author)

  6. Reactor vessel sealing plug

    International Nuclear Information System (INIS)

    Dooley, R.A.

    1986-01-01

    An apparatus is described for sealing a cold leg nozzle of a nuclear reactor pressure vessel from a remote location comprising: at least one sealing plug for mechanically sealing the nozzle from the inside of the reactor pressure vessel. The sealing plug includes a plate and a cone assembly having an end part receptive in the nozzle, the plate being axially moveable relative to the cone assembly. The plate and cone assembly have confronting bevelled edges defining an opening therebetween. A primary O-ring is disposed about the opening and is supported on the bevelled edges, the plate being guidably mounted to the cone assembly for movement toward the cone assembly to radially expand the primary O-ring into sealing engagement with the nozzle. A means is included for providing relative movement between the outer plate and the cone assembly

  7. Brush seal performance measurement system

    OpenAIRE

    Aksoy, Serdar; Akşit, Mahmut Faruk; Aksit, Mahmut Faruk; Duran, Ertuğrul Tolga; Duran, Ertugrul Tolga

    2009-01-01

    Brush seals are rapidly replacing conventional labyrinth seals in turbomachinery applications. Upon pressure application, seal stiffness increases drastically due to frictional bristle interlocking. Operating stiffness is critical to determine seal wear life. Typically, seal stiffness is measured by pressing a curved shoe to brush bore. The static-unpressurized measurement is extrapolated to pressurized and high speed operating conditions. This work presents a seal stiffness measurement syste...

  8. The Quarantine Protection of Sub-Antarctic Australia: Two Islands, Two Regimes

    Directory of Open Access Journals (Sweden)

    Sandra Potter

    2007-11-01

    Full Text Available Sub-Antarctic Heard Island and Macquarie Island are among Australia’s offshore properties susceptible to colonization by species introduced by humans. While both islands share World Heritage status and are IUCN Category Ia Protected Areas (Strict Nature Reserves, different quarantine protection regimes are in operation. Macquarie Island’s biosecurity appears to be less catered for while the means and likelihood of introductions are greater. The administrative, political, practical and geographical contexts within which quarantine management planning takes place variously impact on the level of quarantine protection provided to both islands. These and other remote sites of high conservation value are unlikely to receive heightened protection until the issues associated with such management contexts receive greater attention.

  9. Geology and geochronology of the Sub-Antarctic Snares Islands/Tini Heke, New Zealand

    DEFF Research Database (Denmark)

    Scott, JM; Turnbull, IM; Sagar, MW

    2015-01-01

    are prismatic and yield an essentially unimodal age population of c. 116 Ma that is within error of the granodiorite. These properties suggest that the dated raft represents a meta-igneous rock despite its mica-rich nature. Some schistose rocks on the Western Chain contain coarse relict plagioclase phenocrysts...... and appear to have an igneous protolith. No conclusive metasedimentary rocks have been identified, although sillimanite-bearing mica-rich schist occurs on Rua. Deformation of the crystalline rocks occurred after Snares Granite intrusion and before cooling below muscovite K–Ar closure at 400 ± 50 °C at 95 Ma......The first comprehensive geological map, a summary of lithologies and new radiogenic isotope data (U–Pb, Rb–Sr) are presented for crystalline rocks of the Sub-Antarctic Snares Islands/Tini Heke, 150 km south of Stewart Island. The main lithology is Snares Granite (c. 109 Ma from U–Pb dating...

  10. Barrels of fur: Natural resources and the state in the long history of Russia

    Directory of Open Access Journals (Sweden)

    Alexander Etkind

    2011-07-01

    Full Text Available This article argues that in its enormous Northern and Eastern stretches, the geographical space of Russia was shaped by the fur trade. The essay follows the boom and depletion of the fur trade in the longue durée of Russian history. The fur trade brought many Northern tribes to the edge of extermination. Hunting and trapping was intrinsically violent, did not entail the long-term cycles that were characteristic for agriculture, and needed no participation from women. It also created the situation that some historians called the hyper-activity of the state. The resource-bound economy made the population largely superfluous. The essay also explores the historiography of the fur trade and the debates that this historiography saw in the 1920s. Finally, it draws an analogy between two resource-bound epochs, the pre-modern dependency of the Russian state on fur and its modern dependency on oil. Very little part of the population took part in the fur business, with the result that the state did not care about the population and the population did not care about the state. A caste-like society emerges in these conditions. The security apparatus becomes identical to the state. Due to a chance of history or geography, the same areas that fed the fur trade of medieval Novgorod and Moscow, have provided the Soviet Union and post-Soviet Russia with their means for existence.

  11. Comparative copper sensitivity between life stages of common subantarctic marine invertebrates.

    Science.gov (United States)

    Holan, Jessica R; King, Catherine K; Davis, Andrew R

    2018-03-01

    The development of environmental guidelines in the Antarctic and subantarctic is essential, because expansion of research, tourism, and fishing is placing these regions at increasing risk of contamination. Data are currently insufficient to create the region-specific guidelines needed for the unique conditions in these areas. To develop the most appropriate environmental guidelines, data from the most sensitive life stages of a species should be included to ensure effective protection throughout its life cycle. It is generally accepted that early life stages are more sensitive to contaminants. We compared the toxicity of copper between juvenile and adult life stages of 4 subantarctic marine invertebrates using sublethal and lethal endpoints. For 2 of the species tested, juveniles were more sensitive than adults. (The 7-d median effect concentration [EC50] values for the gastropod Laevilittorina caliginosa were 79 μg/L at the juvenile stage and 125 μg/L at the adult; for the flatworm Obrimoposthia ohlini, values were 190 μg/L at the juvenile stage and 300 μg/L at the adult.) For the isopod Limnoria stephenseni, juveniles were either more sensitive or of equal sensitivity to adults (7-d EC50 values: juvenile 278 μg/L and adult 320 μg/L). In contrast, for the bivalve Gaimardia trapesina, adults appeared to be more sensitive than young adults (7-d EC50 values: juvenile 23 μg/L and adult life history stages was observed, the present study contributes important information for the development of water quality guidelines in polar regions. Environ Toxicol Chem 2018;37:807-815. © 2017 SETAC. © 2017 SETAC.

  12. Postglacial Records of Southern Hemisphere Westerly Wind Variability From the New Zealand Subantarctic Auckland Islands

    Science.gov (United States)

    Moy, C. M.; Vandergoes, M.; Gilmer, G. J.; Nichols, J. E.; Dagg, B. J.; Wilson, G. S.; Browne, I. M.; Curtin, L. G.; Aebig, C.; McGlone, M.

    2015-12-01

    The strength and latitudinal position of the Southern Hemisphere westerly winds (SHWW) play a fundamental role in influencing mid latitude climate and carbon dioxide exchange between the Southern Ocean and the atmosphere. Despite their importance, our understanding of past changes in the SHWW is limited by few paleoclimate records from the modern wind maximum that are often not in agreement. The New Zealand subantarctic Auckland Islands are located within the core of the modern wind belt (50°S) where the ocean-atmospheric linkages between the Antarctic and middle latitudes are strong. In contrast to other subantarctic islands on the Campbell Plateau, the Auckland Islands have protected fjord sub-basins, deep lakes, and peatlands that are advantageous for the development of high-resolution paleoclimate records. We will present ongoing work towards the establishment of multi-proxy and multi-site reconstructions of past SHWW variability from the Auckland Islands. Modern process and paleoclimate results from two research cruises in 2014 and 2015 suggest that in lacustrine and fjord settings, the degree of water column mixing, the stable isotopic composition of n-alkanes and benthic foraminifera, the influx of terrestrial organic matter are good indicators of wind-induced mixing of the water column or precipitation-driven erosion within catchments. In ombrotrophic peatlands, hydrogen isotope ratios of specific organic molecules allow reconstructions of the hydrogen isotope ratios of precipitation, which is related to precipitation source area and the latitudinal position of the SHWW. Using macrofossil counts paired with abundances of leaf wax biomarkers, we are able to estimate the moisture balance at peatland coring sites. Early results indicate an overall strengthening of the SHWW at the Auckland Islands through the Holocene. We will discuss these results within the context of complimentary records developed from New Zealand and southern South America to ultimately

  13. Geology and geochronology of the sub-Antarctic Snares Islands/Tini Heke, New Zealand

    International Nuclear Information System (INIS)

    Scott, J.M.; Turnbull, I.M.; Sagar, M.W.; Tulloch, A.J.; Waight, T.E.; Palin, J.M.

    2015-01-01

    The first comprehensive geological map, a summary of lithologies and new radiogenic isotope data (U-Pb, Rb-Sr) are presented for crystalline rocks of the Sub-Antarctic Snares Islands/Tini Heke, 150 km south of Stewart Island. The main lithology is Snares Granite (c. 109 Ma from U-Pb dating of zircon), which intrudes Broughton Granodiorite (c. 114 Ma from U-Pb zircon) on Broughton Island. Rafts of schist within Snares Granite are common on the outlying Western Chain islets, and rare on North East and Broughton islands. Zircon grains extracted from one schistose raft on Broughton Island are prismatic and yield an essentially unimodal age population of c. 116 Ma that is within error of the granodiorite. These properties suggest that the dated raft represents a meta-igneous rock despite its mica-rich nature. Some schistose rocks on the Western Chain contain coarse relict plagioclase phenocrysts and appear to have an igneous protolith. No conclusive metasedimentary rocks have been identified, although sillimanite-bearing mica-rich schist occurs on Rua. Deformation of the crystalline rocks occurred after Snares Granite intrusion and before cooling below muscovite K-Ar closure at 400 ± 50 degrees C at 95 Ma. This period overlaps the age of extensional ductile shear zones on Stewart Island. The discovery of several basaltic dykes, which cut across fabrics and are unmetamorphosed, indicates that volcanic rocks are associated with all Sub-Antarctic island groups. The larger of the islands are overlain by peat, which on North East Island also contains gravel deposits. (author).

  14. Reactor cavity seal ring

    International Nuclear Information System (INIS)

    Hankinson, M.F.

    1986-01-01

    A hydrostatic seal is described for sealing an annular gap between two flat substantially horizontal coplanar surfaces comprising, in combination: a generally flat annular plate of a width sufficient to span a gap between two surfaces: compressible annular sealing means disposed on the bottom surface of the flat annular plate for sealingly engaging the two flat surfaces in response to a downward force exerted on the plate; and fastening means, distributed along the center line of the plate, for releasably fastening the plate in a position to span the gap to be sealed and exert a downward force on the plate, each fastening means including a pair of elongated members of a size to fit into the gap to be sealed, means for mounting the members on the bottom surface of the plate so that at least a portion of each member is radially moveable in a direction toward a respective one of the vertical side surfaces defining the gap to be sealed to engage same and so that the plate is moveable relative to the members in a downward direction in response to hydrostatic pressure applied to the upper surface of the plate when the members are engaging the vertical side surfaces of an annular gap, and an actuating means, mounted on the plate for movement therewith in response to hydrostatic pressure, for radially moving the members, the actuating means extending through a bore in the plate to the upper surface of the plate

  15. SEALING SIMULATED LEAKS

    Energy Technology Data Exchange (ETDEWEB)

    Michael A. Romano

    2004-09-01

    This report details the testing equipment, procedures and results performed under Task 7.2 Sealing Simulated Leaks. In terms of our ability to seal leaks identified in the technical topical report, Analysis of Current Field Data, we were 100% successful. In regards to maintaining seal integrity after pigging operations we achieved varying degrees of success. Internal Corrosion defects proved to be the most resistant to the effects of pigging while External Corrosion proved to be the least resistant. Overall, with limitations, pressure activated sealant technology would be a viable option under the right circumstances.

  16. Effect of 60Co-gamma radiation on the binding properties in furs

    International Nuclear Information System (INIS)

    Raina, R.K.

    1992-01-01

    New Zealand white rabbit pelts were pickled by the usual procedure and were tanned with basic aluminium sulphate, basic chromium sulphate and their combinations. Tanned furs were irradiated with 60 Co-gamma radiations in the dose range of 5.0-114.0 kGy. The effect of radiation on the binding properties of various added substances like mineral tannins, fats, moisture and shrinkage temperature has been assessed by their comparison with the control samples. The results of these investigations show that radiation on furs causes detannage, increases the moisture and bound fat content and decreases the shrinkage temperature of the furs. (author)

  17. Effect of [sup 60]Co-gamma radiation on the binding properties in furs

    Energy Technology Data Exchange (ETDEWEB)

    Raina, R K [Regional Research Lab., Srinagar (India)

    1992-09-01

    New Zealand white rabbit pelts were pickled by the usual procedure and were tanned with basic aluminium sulphate, basic chromium sulphate and their combinations. Tanned furs were irradiated with [sup 60]Co-gamma radiations in the dose range of 5.0-114.0 kGy. The effect of radiation on the binding properties of various added substances like mineral tannins, fats, moisture and shrinkage temperature has been assessed by their comparison with the control samples. The results of these investigations show that radiation on furs causes detannage, increases the moisture and bound fat content and decreases the shrinkage temperature of the furs. (author).

  18. Modelling predation by transient leopard seals for an ecosystem-based management of Southern Ocean fisheries

    Science.gov (United States)

    Forcada, J.; Royle, J. Andrew; Staniland, I.J.

    2009-01-01

    Correctly quantifying the impacts of rare apex marine predators is essential to ecosystem-based approaches to fisheries management, where harvesting must be sustainable for targeted species and their dependent predators. This requires modelling the uncertainty in such processes as predator life history, seasonal abundance and movement, size-based predation, energetic requirements, and prey vulnerability. We combined these uncertainties to evaluate the predatory impact of transient leopard seals on a community of mesopredators (seals and penguins) and their prey at South Georgia, and assess the implications for an ecosystem-based management. The mesopredators are highly dependent on Antarctic krill and icefish, which are targeted by regional fisheries. We used a state-space formulation to combine (1) a mark-recapture open-population model and individual identification data to assess seasonally variable leopard seal arrival and departure dates, numbers, and residency times; (2) a size-based bioenergetic model; and (3) a size-based prey choice model from a diet analysis. Our models indicated that prey choice and consumption reflected seasonal changes in leopard seal population size and structure, size-selective predation and prey vulnerability. A population of 104 (90?125) leopard seals, of which 64% were juveniles, consumed less than 2% of the Antarctic fur seal pup production of the area (50% of total ingested energy, IE), but ca. 12?16% of the local gentoo penguin population (20% IE). Antarctic krill (28% IE) were the only observed food of leopard seal pups and supplemented the diet of older individuals. Direct impacts on krill and fish were negligible, but the ?escapement? due to leopard seal predation on fur seal pups and penguins could be significant for the mackerel icefish fishery at South Georgia. These results suggest that: (1) rare apex predators like leopard seals may control, and may depend on, populations of mesopredators dependent on prey species

  19. Cover-gas seals: 11-LMFBR seal-test program

    International Nuclear Information System (INIS)

    Steele, O.P. III; Horton, P.H.

    1977-01-01

    The objective of the Cover Gas Seal Material Development Program is to perform the engineering development required to provide reliable seals for LMFBR application. Specific objectives are to verify the performance of commercial solid cross-section and inflatable seals under reactor environments including radiation, to develop advanced materials and configurations capable of achieving significant improvement in radioactive gas containment and seal temperature capabilities, and to optimize seal geometry for maximum reliability and minimal gas permeation

  20. Rotatable seal assembly

    International Nuclear Information System (INIS)

    Garibaldi, J.L.; Logan, C.M.

    1982-01-01

    An assembly is provided for rotatably supporting a rotor on a stator so that vacuum chambers in the rotor and stator remain in communication while the chambers are sealed from ambient air, which enables the use of a ball bearing or the like to support most of the weight of the rotor. The apparatus includes a seal device mounted on the rotor to rotate therewith, but shiftable in position on the rotor while being sealed to the rotor as by an oring. The seal device has a flat face that is biased towards a flat face on the stator, and pressurized air is pumped between the faces to prevent contact between them while spacing them a small distance apart to avoid the inflow of large amounts of air between the faces and into the vacuum chambers

  1. Core disruptive accident margin seal

    International Nuclear Information System (INIS)

    Golden, M.P.

    1979-01-01

    An apparatus for sealing the annulus defined within a substantially cylindrical rotatable riser assembly and plug combination of a nuclear reactor closure head is described. The apparatus comprises an inflatable sealing mechanism disposed in one portion of the riser assembly near the annulus such that upon inflation the sealing mechanism is radially actuated against the other portion of the riser assembly thereby sealing the annulus. The apparatus further comprises a connecting mechanism which places one end of the sealing mechanism in fluid communication with the reactor cover gas so that overpressurization of the reactor cover gas will increase the radial actuation of the sealing mechanism thus enhancing sealing of the annulus

  2. Self-acting shaft seals

    Science.gov (United States)

    Ludwig, L. P.

    1978-01-01

    Self-acting seals are described in detail. The mathematical models for obtaining a seal force balance and the equilibrium operating film thickness are outlined. Particular attention is given to primary ring response (seal vibration) to rotating seat face runout. This response analysis reveals three different vibration models with secondary seal friction being an important parameter. Leakage flow inlet pressure drop and affects of axisymmetric sealing face deformations are discussed. Experimental data on self-acting face seals operating under simulated gas turbine conditions are given. Also a spiral groove seal design operated to 244 m/sec (800 ft/sec) is described.

  3. Sealing arrangement for radioactive material

    International Nuclear Information System (INIS)

    Gray, I.L.S.; Sievwright, R.W.T.; Elliott, J.C.

    1993-01-01

    A sealing arrangement for hermetically sealing two mating surfaces comprises two seals arranged to lie between the surfaces. Each seal provides hermetic sealing over a respective different temperature range and lie serially along the surfaces between the regions to be isolated. A main seal integrity test arrangement is provided in the form of a port and passage. This allows for the introduction of a fluid into or the evacuation of a region between the two seals to detect a leak. The port is also provided with at least two test port seals which seal with a plug. The plug is also provided with a test port to allow the integrity of the test port seal to be tested. (UK)

  4. WelFur - mink: development of on-farm welfare assessment protocols for mink

    DEFF Research Database (Denmark)

    Møller, Steen Henrik; Hansen, Steffen W; Rousing, Tine

    2012-01-01

    European Fur Breeder's Association initiated the "WelFur" project in 2009 in order to develop a welfare assessment protocol for mink and fox farms after the Welfare Quality® standards. The assessment is based on four welfare principles (Good feeding, good housing, good health and appropriate beha...... mink production seasons: Winter, spring, and autumn, in order to cover the life cycle of mink and proved feasible for a one-day visit.......European Fur Breeder's Association initiated the "WelFur" project in 2009 in order to develop a welfare assessment protocol for mink and fox farms after the Welfare Quality® standards. The assessment is based on four welfare principles (Good feeding, good housing, good health and appropriate...

  5. 16 CFR 303.9 - Use of fur-bearing animal names and symbols prohibited.

    Science.gov (United States)

    2010-01-01

    ... the meaning of the Fur Products Labeling Act. (b) Subject to the provisions of paragraph (a) of this... for example “kitten soft”, “Bear Brand”, etc. (2) The nondeceptive use of a trademark or trade name...

  6. Nuclear instrumentation cable end seal

    International Nuclear Information System (INIS)

    Cannon, C.P.; Brown, D.P.

    1979-01-01

    An improved coaxial end seal for hermetically sealed nuclear instrumentation cable exhibiting an improved breakdown pulse noise characteristic under high voltage, high temperature conditions is described. A tubular insulator body has metallized interior and exterior surface portions which are braze sealed to a center conductor and an outer conductive sheath. The end surface of the insulator body which is directed toward the coaxial cable to which it is sealed has a recessed surface portion within which the braze seal material terminates

  7. Glacier extent in sub-Antarctic Kerguelen archipelago from MIS 3 period: Evidence from 36Cl dating

    Science.gov (United States)

    Jomelli, Vincent; Schimmelpfennig, Irene; Favier, Vincent; Mokadem, Fatima; Landais, Amaelle; Rinterknecht, Vincent; Brunstein, Daniel; Verfaillie, Deborah; Legentil, Claude; Aumaitre, Georges; Bourlès, Didier L.; Keddadouche, Karim

    2018-03-01

    Documenting sub-Antarctic glacier variations during the local last glacial maximum is of major interest to better understand their sensitivity to atmospheric and oceanic temperature changes in conjunction with Antarctic ice sheet changes. However, data are sparse because evidence of earlier glacier extents is for most sub-Antarctic islands located offshore making their observation complex. Here, we present 22 cosmogenic 36Cl surface exposure ages obtained from five sites at Kerguelen to document the glacial history. The 36Cl ages from roche moutonnee surfaces, erratics and boulders collected on moraines span from 41.9 ± 4.4 ka to 14.3 ± 1.1 ka. Ice began to retreat on the eastern part of the main island before 41.4 ± 4.4 ka. Slow deglaciation occurred from ∼41 to ∼29 ka. There is no evidence of advances between 29 ka and the Antarctic Cold Reversal (ACR) period (∼14.5-12.9 ka) period. During the ACR, however, the Bontemps and possibly Belvedere moraines were formed by the advance of a Cook Ice Cap outlet glacier and a local glacier on the Presque Ile Jeanne d'Arc, respectively. This glacier evolution differs partly from that of glaciers in New Zealand and in Patagonia. These asynchronous glacier changes in the sub-Antarctic region are however in agreement with sea surface temperature changes recorded around Antarctica, which suggest differences in the climate evolution of the Indo-Pacific and Atlantic sectors of Antarctica.

  8. Pressure Actuated Leaf Seals for Improved Turbine Shaft Sealing

    Science.gov (United States)

    Grondahl, Clayton

    2006-01-01

    This presentation introduces a shaft seal in which leaf seal elements are constructed from slotted shim material formed and layered into a frusto-conical assembly. Limited elastic deflection of seal leaves with increasing system pressure close large startup clearance to a small, non-contacting, steady state running clearance. At shutdown seal elements resiliently retract as differential seal pressure diminishes. Large seal clearance during startup and shutdown provides a mechanism for rub avoidance. Minimum operating clearance improves performance and non-contacting operation promises long seal life. Design features of this seal, sample calculations at differential pressures up to 2400 psid and benefit comparison with brush and labyrinth seals is documented in paper, AIAA 2005 3985, presented at the Advanced Seal Technology session of the Joint Propulsion Conference in Tucson this past July. In this presentation use of bimetallic leaf material will be discussed. Frictional heating of bimetallic leaf seals during a seal rub can relieve the rub condition to some extent with a change in seal shape. Improved leaf seal rub tolerance is expected with bimetallic material.

  9. Upgrading inflatable door seals

    International Nuclear Information System (INIS)

    Sykes, T.M.; Metcalfe, R.; Welch, L.A.; Josefowich, J.M.

    1997-01-01

    Inflatable door seals are used for airlocks in CANDU stations. They have been a significant source of unreliability and maintenance cost. A program is underway to improve their performance and reliability, backed by environmental qualification testing. Only commercial products and suppliers existed in 1993. For historical reasons, these 'existing products' did not use the most durable material then available. In hindsight, neither had they been adapted nor optimized to combat conditions often experienced in the plants-sagging doors, damaged sealing surfaces, and many thousands of openings and closings per year. Initial attempts to involve the two existing suppliers in efforts to upgrade these seals were unsuccessful. Another suitable supplier had therefore to be found, and a 'new,' COG-owned seal developed; this was completed in 1997. This paper summarizes its testing, along with that of the two existing products. Resistance to aging has been improved significantly. Testing has shown that an accident can be safely withstood after 10 years of service or 40,000 openings-closings, whichever comes first. AECL's Fluid Sealing Technology Unit (FSTU) has invested in the special moulds, test fixtures and other necessary tooling and documentation required to begin commercial manufacture of this new quality product. Accordingly, as with FSTU's other nuclear products such as pump seals, the long-term supply of door seals to CANDU plants is now protected from many external uncertainties-e.g., commercial products being discontinued, materials being changed, companies going out of business. Manufacturing to AECL's detailed specifications is being subcontracted to the new supplier. FSTU is performing the quality surveillance, inspection, testing, and customer service activities concomitant with direct responsibility for supply to the plants. (author)

  10. Distribution of mercury in archived fur from little brown bats across Atlantic Canada

    International Nuclear Information System (INIS)

    Little, Megan E.; Burgess, Neil M.; Broders, Hugh G.; Campbell, Linda M.

    2015-01-01

    Total mercury (Hg) concentrations were measured in archived fur from adult female little brown bats sampled at maternity roosts across Atlantic Canada. Mercury concentrations varied significantly among regions and roosts. Bats from Nova Scotia and Newfoundland had the highest median Hg concentrations (9.67 μg/g and 9.51 μg/g) among regions, and individuals from Kejimkujik National Park had the highest Hg (median: 28.38 μg/g) among roosts. Over one third of individuals sampled had fur Hg concentrations exceeding thresholds associated with neurochemical responses. Within-roost examinations of stable carbon and nitrogen isotopes in fur showed inconsistent associations with Hg concentrations. Therefore, the hypothesis that within-roost variation in Hg is driven by variation in diet is not supported by this data, and it is recommended that key prey items be included in future mercury bioaccumulation studies for bats. The elevated mercury fur concentrations for bats from southern Nova Scotia remains an anomaly of concern even when placed in the larger context of Atlantic Canada. - Highlights: • Nova Scotia and Newfoundland bats had the highest median Hg values in fur among regions. • Median maternity roost fur Hg concentrations were highest in Kejimkujik, Nova Scotia. • Hg concentrations in 37% of bats exceeded the threshold for neurochemical responses. • Within-roost variations in carbon and nitrogen stable isotopes do not match Hg trends.

  11. Use of electrochemically activated aqueous solutions in the manufacture of fur materials.

    Science.gov (United States)

    Danylkovych, Anatoliy G; Lishchuk, Viktor I; Romaniuk, Oksana O

    2016-01-01

    The influence of characteristics of electrochemically activated aqueous processing mediums in the treatment of fur skins with different contents of fatty substances was investigated. The use of electroactive water, namely anolytes and catholytes, forgoing antiseptics or surface-active materials, helped to restore the hydration of fur skins and to remove from them soluble proteins, carbohydrates and fatty substances. The activating effect of anolyte and catholyte in solutions of water on the processes of treating raw furs is explained by their special physical and chemical properties, namely the presence of free radicals, ions and molecules of water which easily penetrate cells' membranes and into the structure of non-collagen components and microfiber structure of dermic collagen. The stage of lengthy acid and salt treatment is excluded from the technical treatment as a result of using electroactivated water with high oxidizing power. A low-cost technology of processing different kinds of fur with the use of electroactivated water provides for substantial economy of water and chemical reagents, a two to threefold acceleration of the soaking and tanning processes and creation of highly elastic fur materials with a specified set of physical and chemical properties. At the same time the technology of preparatory processes of fur treatment excludes the use of such toxic antiseptics as formalin and sodium silicofluoride, which gives grounds to regard it as ecologically safe.

  12. Shaft seal assembly and method

    Science.gov (United States)

    Keba, John E. (Inventor)

    2007-01-01

    A pressure-actuated shaft seal assembly and associated method for controlling the flow of fluid adjacent a rotatable shaft are provided. The seal assembly includes one or more seal members that can be adjusted between open and closed positions, for example, according to the rotational speed of the shaft. For example, the seal member can be configured to be adjusted according to a radial pressure differential in a fluid that varies with the rotational speed of the shaft. In addition, in the closed position, each seal member can contact a rotatable member connected to the shaft to form a seal with the rotatable member and prevent fluid from flowing through the assembly. Thus, the seal can be closed at low speeds of operation and opened at high speeds of operation, thereby reducing the heat and wear in the seal assembly while maintaining a sufficient seal during all speeds of operation.

  13. Postglacial Records of Southern Hemisphere Climate and Oceanographic Change From the New Zealand Subantarctic Auckland Islands

    Science.gov (United States)

    Moy, C. M.; Gilmer, G.; Nichols, J. E.; Browne, I. M.; Curtin, L.; Vandergoes, M.; Aebig, C.; Wilson, G. S.

    2017-12-01

    The strength and latitudinal position of the Southern Hemisphere westerly winds (SHWW) play a fundamental role in influencing mid-latitude climate and CO2 exchange between the Southern Ocean and the atmosphere along seasonal to glaicial-interglacial timescales. Despite their importance, our understanding of past SHWW change is limited by the small number of paleoclimate records from the modern wind maximum, which are often not in agreement. The New Zealand subantarctic Auckland Islands are located within the core of the modern wind belt (50°S), a key latitude where ocean-atmospheric linkages between the Antarctic and mid-latitudes are strong. In contrast to other subantarctic islands on the Campbell Plateau, the Auckland Islands have multiple protected fjord sub-basins, deep lakes, and peatlands that are advantageous for the development of high-resolution paleoclimate records. We will present ongoing work towards the establishment of multi-proxy and multi-site reconstructions of past SHWW variability from the Auckland Islands. Modern process and paleoclimate studies suggest that in lacustrine and fjord settings, the degree of water column mixing, the stable isotopic composition of n-alkanes and benthic foraminifera, and the influx of terrestrial organic matter are good indicators of wind-induced mixing of the water column or precipitation-driven erosion within catchments. During the Late Glacial and early Holocene (15 to 9 ka), elevated long-chain n-alkane δD values from ombrotrophic peatlands and an increase in the concentration of redox-sensitive elements in fjord sediment cores, signal weakening of the SHWW that appears to be coincident with periods of rapid deglacial warming of West Antarctica. Since 5.5 ka, we interpret declining n-alkane δD values to indicate enhanced westerly flow. These interpretations are in broad agreement with terrestrial paleoclimate records developed from southern South America and argue for a symmetrical response of the SHWW during

  14. Migrating Seals on Shifting Sands: Testing Alternate Hypotheses for Holocene Ecological and Cultural Change on the California Coast

    Science.gov (United States)

    Koch, P. L.; Newsome, S. D.; Gifford-Gonzalez, D.

    2001-12-01

    The coast of California presented Holocene humans with a diverse set of ecosystems and geomorphic features, from large islands off a semi-desert mainland in the south, to a mix of sandy and rocky beaches abutting grassland and oak forest in central California, to a rocky coast hugged by dense coniferous forest in the north. Theories explaining trends in human resource use, settlement patterns, and demography are equally diverse, but can be categorized as 1) driven by diffusion of technological innovations from outside the region, 2) driven by population growth leading to more intensive extraction of resources, or 3) driven by climatic factors that affect the resource base. With respect to climatic shifts, attention has focused on a possible regime shift ca. 5500 BP, following peak Holocene warming, and on evidence for massive droughts and a drop in marine productivity ca. 1000 BP. While evidence for a coincidence between climatic, cultural, and ecological change is present, albeit complex, in southern California, similar data are largely lacking from central and northern California. We are using isotopic and archaeofaunal analysis to test ideas for ecological and cultural change in central California. Three features of the archaeological record are relevant. First, overall use of marine resources by coastal communities declined after 1000 BP. Second, northern fur seals, which are common in earlier sites, drop in abundance relative to remaining marine animals. We have previously established that Holocene humans in central California were hunting gregariously-breeding northern fur seals from mainland rookeries. These seals breed exclusively on offshore islands today, typically at high latitudes. Their restriction to these isolated sites today may be a response to human overexploitation of their mainland rookeries prehistorically. Finally, collection of oxygen and carbon isotope data from mussels at the archaeological sites, while still in a preliminary phase, has

  15. Caroline Furness and the Evolution of Visual Variable Star Observing

    Science.gov (United States)

    Larsen, Kristine

    2017-01-01

    An Introduction to the Study of Variable Stars by Dr. Caroline Ellen Furness (1869-1936), Director of the Vassar College Observatory, was published in October 2015. Issued in honor of the fiftieth anniversary of the founding of Vassar College, the work was meant to fill a void in the literature, namely as both an introduction to the topic of variable stars as well as a manual explaining how they should be observed and the resulting data analyzed. It was judged to be one of the hundred best books written by an American woman in the last hundred years at the 1933 World’s Fair in Chicago. The book covers the relevant history of and background on types of variable stars, star charts, catalogs, and the magnitude scale, then describes observing techniques, including visual, photographic, and photoelectric photometry. The work finishes with a discussion of light curves and patterns of variability, with a special emphasis on eclipsing binaries and long period variables. Furness’s work is therefore a valuable snapshot of the state of astronomical knowledge, technology, and observing techniques from a century ago. Furness’s book and its reception in the scientific community are analyzed, and parallels with (and departures from) the current advice given by the AAVSO to beginning variable star observers today are highlighted.

  16. Pool gateway seal

    International Nuclear Information System (INIS)

    Starr, J.A.; Steinert, L.A.

    1983-01-01

    A device for sealing a gateway between interconnectable pools in a nuclear facility comprising a frame supporting a liquid impermeable sheet positioned in a u-shaped gateway between the pools. An inflatable tube carried in a channel in the periphery of the frame and adjoining the gateway provides a seal therebetween when inflated. A restraining arrangement on the bottom edge of the frame is releasably engagable with an adjacent portion of the gateway to restrict the movement of the frame in the u-shaped gateway upon inflation of the tube, thereby enhancing the seal. The impermeable sheet is formed of an elastomer and thus is conformable to a liquid permeable supportive wall upon application of liquid pressure to the side of the sheet opposite the wall

  17. HMSRP Hawaiian Monk Seal Master Identification Records (seal)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records of all individually identified Hawaiian monk seals since 1981. These seals were identified by PSD personnel and cooperating scientists...

  18. Dye filled security seal

    International Nuclear Information System (INIS)

    Wilson, D.C.

    1982-01-01

    A security seal for providing an indication of unauthorized access to a sealed object includes an elongate member to be entwined in the object such that access is denied unless the member is removed. The elongate member has a hollow, pressurizable chamber extending throughout its length that is filled with a permanent dye under greater than atmospheric pressure. Attempts to cut the member and weld it together are revealed when dye flows through a rupture in the chamber wall and stains the outside surface of the member

  19. Fur-rubbing with Piper leaves in the San Martín titi monkey, Callicebus oenanthe

    Directory of Open Access Journals (Sweden)

    R. Huashuayo-Llamocca

    2017-06-01

    Full Text Available We report observations on fur-rubbing with leaves from Piper aduncum by a San Martín titi monkey, Callicebus oenanthe. Fur-rubbing occurred during the transition from the dry to the rainy season in a titi monkey group living in a forest fragment in the Moyobamba region of Peru. Since Piper leaves include very potent compounds that may affect ectoparasites, we tentatively interpret the observed fur-rubbing as self-medication.

  20. Ichthyoplankton in the neritic and coastal zone of Antarctica and Subantarctic islands: A review

    Science.gov (United States)

    Koubbi, Philippe; Duhamel, Guy; Hecq, Jean-Henri; Beans, Cristina; Loots, Christophe; Pruvost, Patrice; Tavernier, Eric; Vacchi, Marino; Vallet, Carole

    2009-11-01

    Since the article published by Loeb et al. [Loeb, V.J., Kellermann, A., Koubbi, P., North, A.W., White, M., 1993. Antarctic larval fish assemblages: a review. Bull. Mar. Sci. 53(2), 416-449.] about Antarctic ichthyoplankton, many surveys were carried out in different sectors of the Southern Ocean focusing on different aspects of the ecology of fish larvae. Some of these researches were conducted in the Subantarctic Kerguelen Islands and others on the continental shelf off Terre Adélie and Georges V land. Oceanographic and geographic features influence fish larvae ecology such as island mass effects, gyres, canyons. Antarctic fishes show also temporal segregation of spawning which induces temporal succession of early stage larvae. This avoids competition and probably the predation on early stages for species having few recruits. In that case, we have to understand how these larvae can deal with the match-mismatch with their preys and how they find sufficient food to survive. But our knowledge on Antarctic fish larvae is still insufficient as we do not know larvae for quite a lot of species and because of the difficulty to sample during winter.

  1. Cost saving synergistic shaft seal

    Science.gov (United States)

    Ludwig, L. P.; Strom, T. N.

    1976-01-01

    Segmented carbon rings, used to replace elastomeric seal lip, provide resistance to high temperatures generated in lubricating film. Machining and close manufacturing tolerances of conventional segmented seal are avoided by mounting segmented rings in elastomeric flex section.

  2. Magnetically Actuated Seal, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — FTT proposes development of a magnetically actuated dynamic seal. Dynamic seals are used throughout the turbopump in high-performance, pump-fed, liquid rocket...

  3. Magnetically Actuated Seal, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — FTT proposes development of a magnetically actuated dynamic seal. Dynamic seals are used throughout the turbopump in high-performance, pump-fed, liquid rocket...

  4. Continuous improvement of pump seals

    International Nuclear Information System (INIS)

    Wong, W.; Eyvindson, A.; Rhodes, D.B.

    2003-01-01

    Pump seal reliability continues to be an area needing improvement and ongoing vigilance. Methods have been developed for identifying and assessing factors relating to seal performance, selecting the most relevant ones for a specific station, and then focusing on the most significant aspects and how to improve. Discussion invariably addresses maintenance practices, seal design, monitoring capabilities, operating conditions, transients, and pump and motor design. Success in reliability improvement requires ongoing dialogue among the station operators, pump manufacturers and seal designers. AECL CAN-seals lead the nuclear industry in reliability and seal life. They effectively save operators millions of dollars in outage time and person-rem. This paper describes some of the significant developments in AECL's ongoing program in seal R and D, as well as recent new installations following the most demanding seal qualification programs to date. (author)

  5. Intratracheal Seal Disc

    DEFF Research Database (Denmark)

    Christiansen, Karen J; Moeslund, Niels; Lauridsen, Henrik

    2017-01-01

    . The device consisted of an intratracheal silicone seal disc fixated by a cord through the stoma to an external part. At day 14, computed tomography (CT) was performed before the device was extracted. With the pulling of a cord, the disc unraveled into a thin thread and was extracted through the stoma. At day...

  6. GOLD PRESSURE VESSEL SEAL

    Science.gov (United States)

    Smith, A.E.

    1963-11-26

    An improved seal between the piston and die member of a piston-cylinder type pressure vessel is presented. A layer of gold, of sufficient thickness to provide an interference fit between the piston and die member, is plated on the contacting surface of at least one of the members. (AEC)

  7. Shaft Seal Compensates for Cold Flow

    Science.gov (United States)

    Myers, W. N.; Hein, L. A.

    1985-01-01

    Seal components easy to install. Ring seal for rotating or reciprocating shafts spring-loaded to compensate for slow yielding (cold flow) of sealing material. New seal relatively easy to install because components preassembled, then installed in one piece.

  8. Fiber Optic Safeguards Sealing System

    Science.gov (United States)

    1978-01-01

    8217 or trade names does not constitute an official indorsement or approval of the use thereof. Destroy this report when it is no longer needed. Do not...an intergrity check of a seal than to photograph the seal’s fingerprints and to match positive/negative overlays. The seal identification time and

  9. Ultrasonic dip seal maintenance system

    International Nuclear Information System (INIS)

    Poindexter, A.M.; Ricks, H.E.

    1978-01-01

    Disclosed is a system for removing impurities from the surfaces of liquid dip seals and for wetting the metal surfaces of liquid dip seals in nuclear components. The system comprises an ultrasonic transducer that transmits ultrasonic vibrations along an ultrasonic probe to the metal and liquid surfaces of the dip seal thereby loosening and removing those impurities

  10. Radial lip seals, thermal aspects

    NARCIS (Netherlands)

    Stakenborg, M.J.L.; van Ostaijen, R.A.J.; Dowson, D.

    1989-01-01

    In this paper the influence of temperature on tne seal-snarc contact is studied, using coupled temperature-stress FEH analysis. A thermal network model is used to calculate the seal-shaft contact temperature for steady-state and transient conditions. Contact temperatures were measured under the seal

  11. Cover gas seals: FFTF-LMFBR seal test program

    International Nuclear Information System (INIS)

    Kurzeka, W.; Oliva, R.; Welch, T.S.; Shimazaki, T.

    1974-01-01

    The objectives of this program are to: (1) conduct static and dynamic tests to demonstrate or determine the mechanical performance of full-size (cross section) FFTF fuel transfer machine and reactor vessel head seals intended for use in a sodium vapor-inert gas environment, (2) demonstrate that these FFTF seals or new seal configurations provide acceptable fission product and cover gas retention capabilities at Clinch River Breeder Reactor Plant (CRBRP) operating environmental conditions other than radiation, and (3) develop improved seals and seal technology for the CRBRP to support the national objective to reduce all atmospheric contaminations to low levels

  12. Reproductive performance and weaning success in fur-chewing chinchillas (Chinchilla lanigera).

    Science.gov (United States)

    Galeano, María G; Cantarelli, Verónica I; Ruiz, Rubén D; Fiol de Cuneo, Marta; Ponzio, Marina F

    2014-09-01

    In captive chinchillas, one of the most challenging behavioral problems is the development of a stress-related abnormal repetitive behavior (ARB) known as "fur-chewing". We investigated whether there is a relationship between the severity of fur-chewing behavior and reproductive function in male and female chinchillas. Regardless of the severity of abnormal behavior, fur-chewing males did not show significant differences in seminal quality (sperm concentration, motility and viability; integrity of sperm membrane and acrosome) and the response to the process of semen collection (the number of stimuli needed to achieve ejaculation) when compared to those with normal behavior. Also, females showing normal or fur-chewing behavior presented similar reproductive performance in terms of number of litters per female per year and litter size. However, pup survival rate was lower (p=0.05) in fur-chewing females than in normal females. These results seem to be consistent with data suggesting non-significant effects of ARBs on reproductive performance. Copyright © 2014 Society for Biology of Reproduction & the Institute of Animal Reproduction and Food Research of Polish Academy of Sciences in Olsztyn. Published by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

  13. Evaluation of silk-floss fiber and dog fur as sorbent materials for the petroleum sector

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Lucas P. dos [Universidade Federal do Parana (PGMec/UFPR), Curitiba, PR (Brazil). Programa de Pos-Graduacao em Engenharia Mecanica; Dubiella, Juliana [Universidade Federal do Parana (DEMEC/UFPR), Curitiba, PR (Brazil). Dept. de Engenharia Mecanica. Programa Institucional de Bolsas de Iniciacao Cientifica; Perotta, Larissa [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Programa Interdisciplinar em Engenharia de Petroleo e Gas Natural; Satyanarayana, Kestur G. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Dept. de Quimica; Flores-Sahagun, Thais Sydenstricker [Universidade Federal do Parana (DEMEC/UFPR), Curitiba, PR (Brazil). Dept. de Engenharia Mecanica

    2009-07-01

    In this study silk-floss and dog fur were tested as sorbent materials for oils and the results were compared with peat, a commercial sorbent. Sorption tests were carried out in dry and aqueous systems, with and without stirring for different periods of time (5-1440 min). Density, hydrophobicity, buoyancy and water uptake by the fibers of the impregnated sorbents have been determined. The use of silk-floss and dog fur was also tested in columns to purify water containing toluene, benzene, motor oil or sunflower oil. Breakthrough curves during 120 min were drawn for each material with the samples (oily water or water containing benzene or toluene) and were analyzed by ultraviolet spectroscopy. It was concluded that the silk-floss is the best sorbent material (65.3 g oil/g sorbent) followed by the dog fur (34.6 g oil/g sorbent) and peat (19.5 g oil/g sorbent), for sorption time of 1 h in dynamic condition. The efficiency of the pollutant removal from water with the use of adsorption columns was high for both materials although the use of dog fur was preferable because of the slight superiority in efficiency compared to silk-floss and also, due to the easier packing of the dog fur in the column. (author)

  14. The effects of vessel approaches on the New Zealand fur seal (Arctocepahlus forsteri) in the Bay of Plenty, New Zealand

    NARCIS (Netherlands)

    Cowling, M.; Kirkwood, R.J.; Boren, L.; Sutherland, D.; Scarpaci, C.

    2015-01-01

    Animals that establish new sites near the edge of the species' range may be vulnerable to disturbance as they are low in numbers and are not tied to the sites. Pinniped distributions world-wide are changing as many species are recolonizing areas of their former ranges and establishing new colonies.

  15. Northern fur seal foraging behavior and prey fields in the Bering Sea, Alaska during July-October 2006

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data were used by Kuhn et al. (2015) to investigate how conclusions about predator-prey relationships change with increasing temporal disparity between...

  16. Northern fur seal pup production, adult male counts and harvest data for the Pribilof Islands, Alaska 1909 to Present

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This database contains information on pup production estimates, adult male counts and harvests (commercial and subsistence) for the Pribilof Islands of St. Paul and...

  17. Impact of marine debris on Antarctic fur seals Arctocephalus gazella at Cape Shirreff: diet dependent ingestion and entanglement

    NARCIS (Netherlands)

    Bravo Rebolledo, Elisa; Franeker, van J.A.

    2015-01-01

    For several decades it has been known that plastics in the marine environment can harm marine organisms, most visibly birds, turtles and mammals (Shomura and Yoshida, 1985). These animals can become entangled in this synthetic debris and can ingest macro- and micro-plastics. Recently, increased

  18. Failure analysis and seal life prediction for contacting mechanical seals

    Science.gov (United States)

    Sun, J. J.; He, X. Y.; Wei, L.; Feng, X.

    2008-11-01

    Fault tree analysis method was applied to quantitatively investigate the causes of the leakage failure of mechanical seals. It is pointed out that the change of the surface topography is the main reasons causing the leakage of mechanical seals under the condition of constant preloads. Based on the fractal geometry theory, the relationship between the surface topography and working time were investigated by experiments, and the effects of unit load acting on seal face on leakage path in a mechanical seal were analyzed. The model of predicting seal life of mechanical seals was established on the basis of the relationship between the surface topography and working time and allowable leakage. The seal life of 108 mechanical seal operating at the system of diesel fuel storage and transportation was predicted and the problem of the condition monitoring for the long-period operation of mechanical seal was discussed by this method. The research results indicate that the method of predicting seal life of mechanical seals is feasible, and also is foundation to make scheduled maintenance time and to achieve safe-reliability and low-cost operation for industrial devices.

  19. Refrigeration system with clearance seals

    International Nuclear Information System (INIS)

    Holland, N. J.

    1985-01-01

    In a refrigeration system such as a split Stirling system, fluid seals associated with the reciprocating displacer are virtually dragless clearance seals. Movement of the displacer relative to the pressure variations in the working volume of gas is retarded by a discrete braking element. Because it is not necessary that the brake providing any sealing action, the brake can be designed for greater durability and less dependence on ambient and operating temperatures. Similarly, the clearance seal can be formed of elements having low thermal expansion such that the seal is not temperature dependent. In the primary embodiments the braking element is a split friction brake

  20. Millennial-scale variability in dust deposition, marine export production, and nutrient consumption in the glacial subantarctic ocean (Invited)

    Science.gov (United States)

    Martinez-Garcia, A.; Sigman, D. M.; Anderson, R. F.; Ren, H. A.; Hodell, D. A.; Straub, M.; Jaccard, S.; Eglinton, T. I.; Haug, G. H.

    2013-12-01

    Based on the limitation of modern Southern Ocean phytoplankton by iron and the evidence of higher iron-bearing dust fluxes to the ocean during ice ages, it has been proposed that iron fertilization of Southern Ocean phytoplankton contributed to the reduction in atmospheric CO2 during ice ages. In the Subantarctic zone of the Atlantic Southern Ocean, glacial increases in dust flux and export production have been documented, supporting the iron fertilization hypothesis. However, these observations could be interpreted alternatively as resulting from the equatorward migration of Southern Ocean fronts during ice ages if the observed productivity rise was not accompanied by an increase in major nutrient consumption. Here, new 230Th-normalized lithogenic and opal fluxes are combined with high-resolution biomarker measurements to reconstruct millennial-scale changes in dust deposition and marine export production in the subantarctic Atlantic over the last glacial cycle. In the same record foraminifera-bound nitrogen isotopes are used to reconstruct ice age changes in surface nitrate utilization, providing a comprehensive test of the iron fertilization hypothesis. Elevation in foraminifera-bound δ15N, indicating more complete nitrate consumption, coincides with times of surface cooling and greater dust flux and export production. These observations indicate that the ice age Subantarctic was characterized by iron fertilized phytoplankton growth. The resulting strengthening of the Southern Ocean's biological pump can explain the ~40 ppm lowering of CO2 that characterizes the transitions from mid-climate states to full ice age conditions as well as the millennial-scale atmospheric CO2 fluctuations observed within the last ice age

  1. First records of aphid-pathogenic Entomophthorales in the sub-Antarctic archipelagos of Crozet and Kerguelen

    OpenAIRE

    Bernard Papierok; Charles-Antoine Dedryver; Maurice Hullé

    2016-01-01

    Since the 20th century, the sub-Antarctic islands have suffered an increasing number of biological invasions. Despite the large number of publications on this topic, there is a lack of knowledge on parasitism rates of invasive species and on the role of parasites and pathogens to regulate their populations. Six aphid species have been introduced in the archipelagos of Crozet (Île de la Possession, 46° 25’ S–51° 51’ E) and Kerguelen (49° 21’ S–70° 13’ E). Five of these species were found infec...

  2. Investigation into the impact of storms on sustaining summer primary productivity in the Sub-Antarctic Ocean

    CSIR Research Space (South Africa)

    Nicholson, Sarah-Anne

    2016-09-01

    Full Text Available ]. Observations of chlorophyll a show that summer blooms are widespread and occur annually [Carranza and Gille, 2015], are prominent within the Sub-Antarctic Zone (SAZ), and may be several months in duration (e.g., ~16weeks in Racault et al. [2012]), typically... al., 2005; Bowie et al., 2009] and is consistent with observations of low fe ratios during summer (i.e., the proportion of dissolved iron (DFe) uptake from “new” sources [Boyd et al., 2005]). In this seasonal scenario, after a “once-off” winter...

  3. Mercury in fur of Daubenton's bat (Myotis daubentonii) in Southern Sweden and Comparison to Ecotoxicological Thresholds.

    Science.gov (United States)

    Åkerblom, Staffan; de Jong, Johnny

    2017-11-01

    To characterise mercury (Hg) exposure in Daubenton's bat (Myotis daubentonii, Kuhl 1817) in southern Sweden, 17 specimens were captured in 2013 and back fur samples were taken for analysis to determine Hg concentrations. The fur Hg levels determined [1.15 ± 0.27 (mean ± standard deviation, n = 17) µg Hg g -1 fresh weight (fw)] represent a baseline for comparison in future assessments of Hg exposure in bat populations in northern Europe. Mercury concentrations were close to those reported in fur from other bat species, but were lower than proposed toxicological thresholds in bats (> 30 µg Hg g -1  fw) and mice (5 µg Hg g -1  fw). This is the first study to examine Hg exposure in bats in Scandinavia.

  4. Hermetic Seal Leak Detection Apparatus

    Science.gov (United States)

    Kelley, Anthony R. (Inventor)

    2013-01-01

    The present invention is a hermetic seal leak detection apparatus, which can be used to test for hermetic seal leaks in instruments and containers. A vacuum tight chamber is created around the unit being tested to minimize gas space outside of the hermetic seal. A vacuum inducing device is then used to increase the gas chamber volume inside the device, so that a slight vacuum is pulled on the unit being tested. The pressure in the unit being tested will stabilize. If the stabilized pressure reads close to a known good seal calibration, there is not a leak in the seal. If the stabilized pressure reads closer to a known bad seal calibration value, there is a leak in the seal. The speed of the plunger can be varied and by evaluating the resulting pressure change rates and final values, the leak rate/size can be accurately calculated.

  5. Regenerator cross arm seal assembly

    Science.gov (United States)

    Jackman, Anthony V.

    1988-01-01

    A seal assembly for disposition between a cross arm on a gas turbine engine block and a regenerator disc, the seal assembly including a platform coextensive with the cross arm, a seal and wear layer sealingly and slidingly engaging the regenerator disc, a porous and compliant support layer between the platform and the seal and wear layer porous enough to permit flow of cooling air therethrough and compliant to accommodate relative thermal growth and distortion, a dike between the seal and wear layer and the platform for preventing cross flow through the support layer between engine exhaust and pressurized air passages, and air diversion passages for directing unregenerated pressurized air through the support layer to cool the seal and wear layer and then back into the flow of regenerated pressurized air.

  6. A multiproxy fjord sediment record of Holocene climate change from the subantarctic Auckland Islands

    Science.gov (United States)

    Browne, I. M.; Moy, C. M.; Wilson, G. S.; Neil, H.; Riesselman, C. R.

    2014-12-01

    The Southern Hemisphere Westerly Winds (SHWW) and the associated oceanic fronts have a major influence on atmospheric and oceanic circulation in the Southern Hemisphere. Sediment cores recovered from fjords along the eastern margin of the sub-Antarctic Auckland Islands (51°S, 166°E) are ideally located to sensitively record changes in the strength and position of the SHWW throughout the Holocene. A 5.75m core from Hanfield Inlet preserves both marine and terrestrial environmental components, which we use to develop a multiproxy record of past climatic conditions. This core, composed entirely of brown marine mud and silt, was recovered from a depth of 44m. Based on the entrance sill depth of the fjord (10mbsl) and our knowledge of regional sea level rise, we infer that the base of the core will be early Holocene in age, which will be confirmed using radiocarbon age dating. Benthic foraminiferal assemblages (125-500μm fraction) in surface and downcore samples are dominated by three taxa, Nonionellina flemingi, Cassidulina carinata and Quinqueloculina seminula. These species are either shallow infaunal or infaunal. We will use stable carbon (δ¹³C) and oxygen (δ¹⁸O) isotope geochemistry of the benthic foraminifera Nonionellina flemingi, Bolivina cf. earlandi, Trifarina angulosa, Bulimina marginata f. marginata and Cibicides species (all identified from Rose Bengal stained box-core samples) to reconstruct water column fluctuations associated with frontal migration. These results will compliment bulk sediment C and N concentration and isotope reconstructions of terrestrial organic matter delivery to fjord sub-basins over the past 12,000 years.

  7. Soil calcium availability influences shell ecophenotype formation in the sub-antarctic land snail, Notodiscus hookeri.

    Directory of Open Access Journals (Sweden)

    Maryvonne Charrier

    Full Text Available Ecophenotypes reflect local matches between organisms and their environment, and show plasticity across generations in response to current living conditions. Plastic responses in shell morphology and shell growth have been widely studied in gastropods and are often related to environmental calcium availability, which influences shell biomineralisation. To date, all of these studies have overlooked micro-scale structure of the shell, in addition to how it is related to species responses in the context of environmental pressure. This study is the first to demonstrate that environmental factors induce a bi-modal variation in the shell micro-scale structure of a land gastropod. Notodiscus hookeri is the only native land snail present in the Crozet Archipelago (sub-Antarctic region. The adults have evolved into two ecophenotypes, which are referred to here as MS (mineral shell and OS (organic shell. The MS-ecophenotype is characterised by a thick mineralised shell. It is primarily distributed along the coastline, and could be associated to the presence of exchangeable calcium in the clay minerals of the soils. The Os-ecophenotype is characterised by a thin organic shell. It is primarily distributed at high altitudes in the mesic and xeric fell-fields in soils with large particles that lack clay and exchangeable calcium. Snails of the Os-ecophenotype are characterised by thinner and larger shell sizes compared to snails of the MS-ecophenotype, indicating a trade-off between mineral thickness and shell size. This pattern increased along a temporal scale; whereby, older adult snails were more clearly separated into two clusters compared to the younger adult snails. The prevalence of glycine-rich proteins in the organic shell layer of N. hookeri, along with the absence of chitin, differs to the organic scaffolds of molluscan biominerals. The present study provides new insights for testing the adaptive value of phenotypic plasticity in response to spatial

  8. Submarine geology and geomorphology of active Sub-Antarctic volcanoes: Heard and McDonald Islands

    Science.gov (United States)

    Watson, S. J.; Coffin, M. F.; Whittaker, J. M.; Lucieer, V.; Fox, J. M.; Carey, R.; Arculus, R. J.; Bowie, A. R.; Chase, Z.; Robertson, R.; Martin, T.; Cooke, F.

    2016-12-01

    Heard and McDonald Islands (HIMI) are World Heritage listed sub-Antarctic active volcanic islands in the Southern Indian Ocean. Built atop the Kerguelen Plateau by Neogene-Quaternary volcanism, HIMI represent subaerial exposures of the second largest submarine Large Igneous Province globally. Onshore, processes influencing island evolution include glaciers, weathering, volcanism, vertical tectonics and mass-wasting (Duncan et al. 2016). Waters surrounding HIMI are largely uncharted, due to their remote location. Hence, the extent to which these same processes shape the submarine environment around HIMI has not been investigated. In early 2016, we conducted marine geophysical and geologic surveys around HIMI aboard RV Investigator (IN2016_V01). Results show that volcanic and sedimentary features prominently trend east-west, likely a result of erosion by the eastward flowing Antarctic Circumpolar Current and tidal currents. However, spatial patterns of submarine volcanism and sediment distribution differ substantially between the islands. >70 sea knolls surround McDonald Island suggesting substantial submarine volcanism. Geophysical data reveals hard volcanic seafloor around McDonald Island, whereas Heard Island is characterised by sedimentary sequences tens of meters or more thick and iceberg scours - indicative of glacial processes. Differences in submarine geomorphology are likely due to the active glaciation of Heard Island and differing rock types (Heard: alkali basalt, McDonald: phonolite), and dominant products (clastics vs. lava). Variations may also reflect different magmatic plumbing systems beneath the two active volcanoes (Heard produces larger volumes of more focused lava, whilst McDonald extrudes smaller volumes of more evolved lavas from multiple vents across the edifice). Using geophysical data, corroborated with new and existing geologic data, we present the first geomorphic map revealing the processes that shape the submarine environment around HIMI.

  9. Sealing wells with gel

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, E C

    1967-10-01

    A new system is being used in Mexico to temporarily plug producing wells. The temporary seal is a gel with a catalyst. The use of this temporary plug allows gas-lift wells to be taken off production in order to carry out emergency repairs. The gel solidifies by the action of the catalyst to a high temperature (70 - 150/sup 0/C). By locating the bottom of the tubing at the top of the production interval, the gel material will go into the permeable formation, and immediately set. When the gel has solidified, it seals off the horizon that must not be stimulated, and leaves the others exposed to the acid action. When the treatment is finished, the gel, by action of the catalyst, is liquefied and removed from the formation, being produced with the oil.

  10. Radioactive waste sealing container

    International Nuclear Information System (INIS)

    Tozawa, S.; Kitamura, T.; Sugimoto, S.

    1984-01-01

    A low- to medium-level radioactive waste sealing container is constructed by depositing a foundation coating consisting essentially of zinc, cadmium or a zinc-aluminum alloy over a steel base, then coating an organic synthetic resin paint containing a metal phosphate over the foundation coating, and thereafter coating an acryl resin, epoxy resin, and/or polyurethane paint. The sealing container can consist of a main container body, a lid placed over the main body, and fixing members for clamping and fixing the lid to the main body. Each fixing member may consist of a material obtained by depositing a coating consisting essentially of cadmium or a zinc-aluminum alloy over a steel base

  11. Control of Fur synthesis by the non-coding RNA RyhB and iron-responsive decoding.

    Science.gov (United States)

    Vecerek, Branislav; Moll, Isabella; Bläsi, Udo

    2007-02-21

    The Fe2+-dependent Fur protein serves as a negative regulator of iron uptake in bacteria. As only metallo-Fur acts as an autogeneous repressor, Fe2+scarcity would direct fur expression when continued supply is not obviously required. We show that in Escherichia coli post-transcriptional regulatory mechanisms ensure that Fur synthesis remains steady in iron limitation. Our studies revealed that fur translation is coupled to that of an upstream open reading frame (uof), translation of which is downregulated by the non-coding RNA (ncRNA) RyhB. As RyhB transcription is negatively controlled by metallo-Fur, iron depletion creates a negative feedback loop. RyhB-mediated regulation of uof-fur provides the first example for indirect translational regulation by a trans-encoded ncRNA. In addition, we present evidence for an iron-responsive decoding mechanism of the uof-fur entity. It could serve as a backup mechanism of the RyhB circuitry, and represents the first link between iron availability and synthesis of an iron-containing protein.

  12. Electromagnetic shaft seal

    International Nuclear Information System (INIS)

    Takahashi, Kenji.

    1994-01-01

    As an electromagnetic shaft seal, there are disposed outwarding electromagnetic induction devices having generating power directing to an electroconductive fluid as an object of sealing, and inwarding electromagnetic induction device added coaxially. There are disposed elongate rectangular looped first coils having a predetermined inner diameter, second coils having the same shape and shifted by a predetermined pitch relative to the first coil and third coil having the same shape and shifted by a predetermined pitch relative to the second coil respectively each at a predetermined inner diameter of clearance to the outwarding electromagnetic induction devices and the inwarding electromagnetic induction device. If the inwarding electromagnetic induction device and the outwarding electromagnetic induction device are operated, they are stopped at a point that the generating power of the former is equal with the sum of the generating power of the latter and a differential pressure. When three-phase AC is charged to the first coil, the second coil and the third coil successively, a force is generated in the advancing direction of the magnetic field in the electroconductive fluid by the similar effect to that of a linear motor, and the seal is maintained at high reliability. Moreover, the limit for the rotational angle of the shaft is not caused. (N.H.)

  13. Effect of sup 60 Co-gamma radiation on the properties of furs

    Energy Technology Data Exchange (ETDEWEB)

    Raina, R.K.; Wali, B.K. (Regional Research Lab., Srinagar (India)); Wani, A.M. (Nuclear Research Lab., Srinagar (India))

    1990-01-01

    Furs pretanned with various combinations of vegetable tanning agents and retanned with alum have been irradiated with {sup 60}Co {gamma}-radiation in the dose range 5.0-114.0 kGy. The physico-chemical modifications induced by the radiation have been assessed by measuring changes in tensile strength, absorption of water, elongation and shrinkage temperature. For investigations, samples have been taken from the same topographic region of the rabbit furs, belonging to the same age and sex. The results are discussed. (author).

  14. Effect of 60Co-gamma radiation on the properties of furs

    International Nuclear Information System (INIS)

    Raina, R.K.; Wali, B.K.; Wani, A.M.

    1990-01-01

    Furs pretanned with various combinations of vegetable tanning agents and retanned with alum have been irradiated with 60 Co γ-radiation in the dose range 5.0-114.0 kGy. The physico-chemical modifications induced by the radiation have been assessed by measuring changes in tensile strength, absorption of water, elongation and shrinkage temperature. For investigations, samples have been taken from the same topographic region of the rabbit furs, belonging to the same age and sex. The results are discussed. (author)

  15. Effect of 60Co-gamma radiation on the properties of furs

    Science.gov (United States)

    Raina, R. K.; Wali, B. K.; Wani, A. M.

    Furs pretanned with various combinations of vegetable tanning agents and retanned with alum have been irradiated with 60Co γ-radiation in the dose range 5.0-114.0 kGy. The physico-chemical modifications induced by the radiation have been assessed by measuring changes in tensile strength, absorption of water, elongation and shrinkage temperature. For investigations, samples have been taken from the same topographic region of the rabbit furs, belonging to the same age and sex. The results are discussed hereunder.

  16. PHP und MySQL der Web-Baukasten fur Einsteiger und Individualisten

    CERN Document Server

    Damaschke, Giesbert

    2015-01-01

    Sie haben schon eigene Webseiten gebaut und mochten diese nun mit Funktionen ausstatten, fur die Sie PHP und MySQL benotigen? Giesbert Damaschke zeigt Ihnen in diesem Buch, wie Sie das schaffen. Schritt fur Schritt erlernen Sie die benotigten Programmier- und Datenbankgrundlagen - immer im Rahmen von typischen dynamischen Anwendungen. So erheben und speichern Sie zum Beispiel mit Formularen Kontaktdaten, prufen Benutzereingaben, erstellen Menus, richten einen Besucherzahler ein, verschicken E-Mails mit PHP oder entwickeln sogar einen eigenen Blog. Alle Codebeispiele werden ausfuhrlich erklart,

  17. On the nature of fur evolution: A phylogenetic approach in Actinobacteria

    Directory of Open Access Journals (Sweden)

    Benson David R

    2008-06-01

    Full Text Available Abstract Background An understanding of the evolution of global transcription regulators is essential for comprehending the complex networks of cellular metabolism that have developed among related organisms. The fur gene encodes one of those regulators – the ferric uptake regulator Fur – widely distributed among bacteria and known to regulate different genes committed to varied metabolic pathways. On the other hand, members of the Actinobacteria comprise an ecologically diverse group of bacteria able to inhabit various natural environments, and for which relatively little is currently understood concerning transcriptional regulation. Results BLAST analyses revealed the presence of more than one fur homologue in most members of the Actinobacteria whose genomes have been fully sequenced. We propose a model to explain the evolutionary history of fur within this well-known bacterial phylum: the postulated scenario includes one duplication event from a primitive regulator, which probably had a broad range of co-factors and DNA-binding sites. This duplication predated the appearance of the last common ancestor of the Actinobacteria, while six other duplications occurred later within specific groups of organisms, particularly in two genera: Frankia and Streptomyces. The resulting paralogues maintained main biochemical properties, but became specialised for regulating specific functions, coordinating different metal ions and binding to unique DNA sequences. The presence of syntenic regions surrounding the different fur orthologues supports the proposed model, as do the evolutionary distances and topology of phylogenetic trees built using both Neighbor-Joining and Maximum-Likelihood methods. Conclusion The proposed fur evolutionary model, which includes one general duplication and two in-genus duplications followed by divergence and specialization, explains the presence and diversity of fur genes within the Actinobacteria. Although a few rare

  18. Closure and Sealing Design Calculation

    International Nuclear Information System (INIS)

    T. Lahnalampi; J. Case

    2005-01-01

    The purpose of the ''Closure and Sealing Design Calculation'' is to illustrate closure and sealing methods for sealing shafts, ramps, and identify boreholes that require sealing in order to limit the potential of water infiltration. In addition, this calculation will provide a description of the magma that can reduce the consequences of an igneous event intersecting the repository. This calculation will also include a listing of the project requirements related to closure and sealing. The scope of this calculation is to: summarize applicable project requirements and codes relating to backfilling nonemplacement openings, removal of uncommitted materials from the subsurface, installation of drip shields, and erecting monuments; compile an inventory of boreholes that are found in the area of the subsurface repository; describe the magma bulkhead feature and location; and include figures for the proposed shaft and ramp seals. The objective of this calculation is to: categorize the boreholes for sealing by depth and proximity to the subsurface repository; develop drawing figures which show the location and geometry for the magma bulkhead; include the shaft seal figures and a proposed construction sequence; and include the ramp seal figure and a proposed construction sequence. The intent of this closure and sealing calculation is to support the License Application by providing a description of the closure and sealing methods for the Safety Analysis Report. The closure and sealing calculation will also provide input for Post Closure Activities by describing the location of the magma bulkhead. This calculation is limited to describing the final configuration of the sealing and backfill systems for the underground area. The methods and procedures used to place the backfill and remove uncommitted materials (such as concrete) from the repository and detailed design of the magma bulkhead will be the subject of separate analyses or calculations. Post-closure monitoring will not

  19. TECHNOLOGY ROADMAPPING FOR IAEA SEALS.

    Energy Technology Data Exchange (ETDEWEB)

    HOFFHEINS,B.; ANNESE,C.; GOODMAN,M.; OCONNOR,W.; GUSHUE,S.; PEPPER,S.

    2003-07-13

    In the fall of 2002, the U.S. Support Program (USSP) initiated an effort to define a strategy or ''roadmap'' for future seals technologies and to develop a generalized process for planning safeguards equipment development, which includes seals and other safeguards equipment. The underlying objectives of the USSP include becoming more proactive than reactive in addressing safeguards equipment needs, helping the IAEA to maintain an inventory of cost-effective, reliable, and effective safeguards equipment, establishing a long-term planning horizon, and securing IAEA ownership in the process of effective requirements definition and timely transitioning of new or improved systems for IAEA use. At an initial workshop, seals, their functions, performance issues, and future embodiments were discussed in the following order: adhesive seals, metal seals, passive and active loop seals, ultrasonic seals, tamper indicating enclosures (including sample containers, equipment enclosures, and conduits). Suggested improvements to these technologies focused largely on a few themes: (1) The seals must be applied quickly, easily, and correctly; (2) Seals and their associated equipment should not unduly add bulk or weight to the inspectors load; (3) Rapid, in-situ verifiability of seals is desirable; and (4) Seal systems for high risk or high value applications should have two-way, remote communications. Based upon these observations and other insights, the participants constructed a skeletal approach for seals technology planning. The process begins with a top-level review of the fundamental safeguards requirements and extraction of required system features, which is followed by analysis of suitable technologies and identification of technology gaps, and finally by development of a planning schedule for system improvements and new technology integration. Development of a comprehensive procedure will require the partnership and participation of the IAEA. The

  20. First records of aphid-pathogenic Entomophthorales in the sub-Antarctic archipelagos of Crozet and Kerguelen

    Directory of Open Access Journals (Sweden)

    Bernard Papierok

    2016-07-01

    Full Text Available Since the 20th century, the sub-Antarctic islands have suffered an increasing number of biological invasions. Despite the large number of publications on this topic, there is a lack of knowledge on parasitism rates of invasive species and on the role of parasites and pathogens to regulate their populations. Six aphid species have been introduced in the archipelagos of Crozet (Île de la Possession, 46° 25’ S–51° 51’ E and Kerguelen (49° 21’ S–70° 13’ E. Five of these species were found infected by entomopathogenic fungi of the order Entomophthorales. All these fungal species are cosmopolitan. Conidiobolus obscurus and Entomophthora planchoniana were the most frequently observed on Île de la Possession and in Archipel des Kerguelen, respectively. This is the first report of pathogenic fungi of aphids on the sub-Antarctic islands. We discuss these results in the light of our current knowledge of these insect pathogens. Their introduction by aphids surviving on plants during transportation is the most likely hypothesis to explain their presence on these remote islands.

  1. Mapping Sub-Antarctic Cushion Plants Using Random Forests to Combine Very High Resolution Satellite Imagery and Terrain Modelling

    Science.gov (United States)

    Bricher, Phillippa K.; Lucieer, Arko; Shaw, Justine; Terauds, Aleks; Bergstrom, Dana M.

    2013-01-01

    Monitoring changes in the distribution and density of plant species often requires accurate and high-resolution baseline maps of those species. Detecting such change at the landscape scale is often problematic, particularly in remote areas. We examine a new technique to improve accuracy and objectivity in mapping vegetation, combining species distribution modelling and satellite image classification on a remote sub-Antarctic island. In this study, we combine spectral data from very high resolution WorldView-2 satellite imagery and terrain variables from a high resolution digital elevation model to improve mapping accuracy, in both pixel- and object-based classifications. Random forest classification was used to explore the effectiveness of these approaches on mapping the distribution of the critically endangered cushion plant Azorella macquariensis Orchard (Apiaceae) on sub-Antarctic Macquarie Island. Both pixel- and object-based classifications of the distribution of Azorella achieved very high overall validation accuracies (91.6–96.3%, κ = 0.849–0.924). Both two-class and three-class classifications were able to accurately and consistently identify the areas where Azorella was absent, indicating that these maps provide a suitable baseline for monitoring expected change in the distribution of the cushion plants. Detecting such change is critical given the threats this species is currently facing under altering environmental conditions. The method presented here has applications to monitoring a range of species, particularly in remote and isolated environments. PMID:23940805

  2. Brucella antibody seroprevalence in Antarctic seals (Arctocephalus gazella, Leptonychotes weddellii and Mirounga leonina).

    Science.gov (United States)

    Jensen, Silje-Kristin; Nymo, Ingebjørg Helena; Forcada, Jaume; Hall, Ailsa; Godfroid, Jacques

    2013-09-03

    Brucellosis is a worldwide infectious zoonotic disease caused by Gram-negative bacteria of the genus Brucella, and Brucella infections in marine mammals were first reported in 1994. A serosurvey investigating the presence of anti-Brucella antibodies in 3 Antarctic pinniped species was undertaken with a protein A/G indirect enzyme-linked immunosorbent assay (iELISA) and the Rose Bengal test (RBT). Serum samples from 33 Weddell seals Leptonychotes weddelli were analysed, and antibodies were detected in 8 individuals (24.2%) with the iELISA and in 21 (65.6%) with the RBT. We tested 48 southern elephant seal Mirounga leonina sera and detected antibodies in 2 animals (4.7%) with both the iELISA and the RBT. None of the 21 Antarctic fur seals Arctocephalus gazella was found positive. This is the first report of anti-Brucella antibodies in southern elephant seals. The potential impact of Brucella infection in pinnipeds in Antarctica is not known, but Brucella spp. are known to cause abortion in terrestrial species and cetaceans. Our findings suggest that Brucella infection in pinnipeds is present in the Antarctic, but to date B. pinnipedialis has not been isolated from any Antarctic pinniped species, leaving the confirmation of infection pending.

  3. Shaft and tunnel sealing considerations

    International Nuclear Information System (INIS)

    Kelsall, P.C.; Shukla, D.K.

    1980-01-01

    Much of the emphasis of previous repository sealing research has been placed on plugging small diameter boreholes. It is increasingly evident that equal emphasis should now be given to shafts and tunnels which constitute more significant pathways between a repository and the biosphere. The paper discusses differences in requirements for sealing shafts and tunnels as compared with boreholes and the implications for seal design. Consideration is given to a design approach for shaft and tunnel seals based on a multiple component design concept, taking into account the requirements for retrievability of the waste. A work plan is developed for the future studies required to advance shaft and tunnel sealing technology to a level comparable with the existing technology for borehole sealing

  4. Sealed radioactive source management

    International Nuclear Information System (INIS)

    2005-01-01

    Sealed radioactive sources have been used in a wide range of application in medicine, agriculture, geology, industry and other fields. Since its utilization many sources have become out of use and became waste but no proper management. This has lead to many accidents causing deaths and serious radiation injuries worldwide. Spent sources application is expanding but their management has seen little improvements. Sealed radioactive sources have become a security risk calling for prompt action. Source management helps to maintain sources in a good physical status and provide means of source tracking and control. It also provides a well documented process of the sources making any future management options safe, secure and cost effective. Last but not least good source management substantially reduces the risk of accidents and eliminates the risk of malicious use. The International Atomic Energy Agency assists Member States to build the infrastructure to properly manage sealed radioactive sources. The assistance includes training of national experts to handle, condition and properly store the sources. For Member States that do not have proper facilities, we provide the technical assistance to design a proper facility to properly manage the radioactive sources and provide for their proper storage. For Member States that need to condition their sources properly but don't have the required infrastructure we provide direct assistance to physically help them with source recovery and provide an international expert team to properly condition their sources and render them safe and secure. We offer software (Radioactive Waste Management Registry) to properly keep a complete record on the sources and provide for efficient tracking. This also helps with proper planning and decision making for long term management

  5. Sealing of rock fractures

    International Nuclear Information System (INIS)

    Pusch, R.; Erlstroem, M.; Boergesson, L.

    1985-12-01

    The major water-bearing fractures in granite usually from fairly regular sets but the extension and degree of connectivity is varying. This means that only a few fractures that are interconnected with the deposition holes and larger water-bearing structures in a HLW repository are expected and if they can be identified and cut off through sealing it would be possible to improve the isolation of waste packages very effectively. Nature's own fracture sealing mechanisms may be simulated and a survey of the involved processes actually suggests a number of possible filling methods and substances. Most of them require high temperature and pressure and correspondingly sophisticated techniques, but some are of potential interest for immediate application with rather moderate effort. Such a technique is to fill the fractures with clayey substances which stay flexible and low-permeable provided that they remain physically and chemically intact. It is demonstrated in the report that effective grouting requires a very low viscosity and shear strength of the substance and this can be achieved by mechanical agitation as demonstrated in this report. Thus, by superimposing static pressure and shear waves induced by percussion hammering at a suitable frequency, clays and fine-grained silts as well as cement can be driven into fractures with an average aperture as small as 0.1 mm. Experiments were made in the laboratory using concrete and steel plates, and a field pilot test was also conducted under realistic conditions on site in Stripa. They all demonstrated the practicality of the 'dynamic injection technique' and that the fluid condition of the grouts yielded complete filling of the injected space to a considerable distance from the injection point. The field test indicated a good sealing ability as well as a surprisingly high resistance to erosion and piping. (author)

  6. Low-Torque Seal Development

    Science.gov (United States)

    Lattime, Scott B.; Borowski, Richard

    2009-01-01

    The EcoTurn Class K production prototypes have passed all AAR qualification tests and received conditional approval. The accelerated life test on the second set of seals is in progress. Due to the performance of the first set, no problems are expected.The seal has demonstrated superior performance over the HDL seal in the test lab with virtually zero torque and excellent contamination exclusion and grease retention.

  7. Production of sealed sources

    International Nuclear Information System (INIS)

    Bandi, L.N.

    2016-01-01

    Radioisotope production has been an ongoing activity in India since the sixties. Radioisotopes find wide-ranging applications in various fields, including industry, research, agriculture and medicine. Board of Radiation and Isotope Technology, an industrial unit of Department of Atomic Energy is involved in fabrication and supply of wide variety of sealed sources. The main radioisotopes fabricated and supplied by BRIT are Cobalt-60, Iridium-192. These isotopes are employed in industrial and laboratory irradiators, teletherapy machines, radiography exposure devices, nucleonic gauges. The source fabrication facilities of BRIT are located at Rajasthan Atomic Power Project Cobalt-60 Facility (RAPPCOF), Kota, Radiological Laboratories Group (RLG) and High Intensity Radiation Utilization Project (HIRUP) at Trombay

  8. High-resolution view of the spring bloom initiation and net community production in the Subantarctic Southern Ocean using glider data

    CSIR Research Space (South Africa)

    Thomalla, Sandy J

    2015-07-01

    Full Text Available the need for a high-resolution approach to resolving biogeochemical processes. In this study, 5.5 months of continuous, high-resolution (3 h, 2 km horizontal resolution) glider data from spring to summer in the Atlantic Subantarctic Zone is used...

  9. The seasonal cycle of mixed layer dynamics and phytoplankton biomass in the Sub-Antarctic Zone: A high-resolution glider experiment

    CSIR Research Space (South Africa)

    Swart, S

    2014-06-01

    Full Text Available -resolution glider data (3 hourly, 2 km horizontal resolution), from~6 months of sampling (spring through summer) in the Sub-Antarctic Zone, is used to assess 1) the different forcing mechanisms driving variability in upper ocean physics and 2) how thesemay...

  10. Investigating the turbulence response of a 1-D idealized water column located in the sub-Antarctic zone with focus on the upper ocean dynamics

    CSIR Research Space (South Africa)

    Boodhraj, Kirodh

    2017-09-01

    Full Text Available A one-dimensional ocean physical model was implemented in the sub-Antarctic Southern Ocean using the Nucleus for the European Modelling of the Ocean (NEMO) model. It was used to examine the effects of the turbulence response of the simulation...

  11. Effects of dietary protein level on growth, health and physiological parameters in growing-furring mink

    DEFF Research Database (Denmark)

    Damgaard, Birthe Marie; Larsen, Peter F.; Clausen, Tove

    2012-01-01

    The aim of the study was to investigate the effects of the dietary protein level and the feeding strategy on growth, health and physiological blood and liver parameters in growing-furring male mink. Effects of dietary protein levels ranging from 22% of metabolizable energy (MEp) to experimental p...

  12. Identifying QTL for fur quality traits in mink (Neovison vison)

    DEFF Research Database (Denmark)

    Thirstrup, Janne Pia; Anistoroaei, Razvan Marian; Guldbrandtsen, Bernt

    2012-01-01

    Mapping of quantitative trait loci (QTL) affecting fur quality traits (guard hair length, guard hair thikness, and density of woll) was performed in a 3-generation population (F2-design). In the parental generation, Nordic wild mink were crossed reciprocally with American short nap mink. Twenty o...

  13. En stratigrafisk og tafonomisk analyse af fossile fugle og fjer fra Fur Formationen

    DEFF Research Database (Denmark)

    Lindow, Bent Erik Kramer

    2007-01-01

    Resultaterne af den første kvantitative stratigrafiske og tafonomiske analyse af de fossile fugle fra Fur Formationen viser at: 1) Hovedparten (71%) af det stratigrafisk bestembare fossile fuglemateriale stammer fra to horisonter, dels i intervallet fra askelag +22 til +35 og dels i intervallet...

  14. 16 CFR 1.63 - Injunctions: Wool, fur, and textile cases.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Injunctions: Wool, fur, and textile cases. 1.63 Section 1.63 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF... be to the public interest for it to do so, the Commission will apply to the courts for injunctive...

  15. Two new parrots (Psittaciformes) from the Lower Eocene Fur Formation of Denmark

    DEFF Research Database (Denmark)

    Waterhouse, David; Lindow, Bent Erik Kramer; Zelenkov, Nikita

    2008-01-01

    Two new fossil psittaciform birds from the Lower Eocene ‘Mo Clay' (Fur Formation) of Denmark (c. 54 Ma) are described. An unnamed specimen is assigned to the extinct avian family of stem-group parrots, Pseudasturidae (genus and species incertae sedis), while a second (Mopsitta tanta gen. et sp. nov...

  16. SEAL FOR HIGH SPEED CENTRIFUGE

    Science.gov (United States)

    Skarstrom, C.W.

    1957-12-17

    A seal is described for a high speed centrifuge wherein the centrifugal force of rotation acts on the gasket to form a tight seal. The cylindrical rotating bowl of the centrifuge contains a closure member resting on a shoulder in the bowl wall having a lower surface containing bands of gasket material, parallel and adjacent to the cylinder wall. As the centrifuge speed increases, centrifugal force acts on the bands of gasket material forcing them in to a sealing contact against the cylinder wall. This arrangememt forms a simple and effective seal for high speed centrifuges, replacing more costly methods such as welding a closure in place.

  17. Advanced High Temperature Structural Seals

    Science.gov (United States)

    Newquist, Charles W.; Verzemnieks, Juris; Keller, Peter C.; Rorabaugh, Michael; Shorey, Mark

    2002-10-01

    This program addresses the development of high temperature structural seals for control surfaces for a new generation of small reusable launch vehicles. Successful development will contribute significantly to the mission goal of reducing launch cost for small, 200 to 300 pound payloads. Development of high temperature seals is mission enabling. For instance, ineffective control surface seals can result in high temperature (3100 F) flows in the elevon area exceeding structural material limits. Longer sealing life will allow use for many missions before replacement, contributing to the reduction of hardware, operation and launch costs.

  18. Borehole sealing method and apparatus

    International Nuclear Information System (INIS)

    Hartley, J.N.; Jansen, G. Jr.

    1977-01-01

    A method and apparatus is described for sealing boreholes in the earth. The borehole is blocked at the sealing level, and a sealing apparatus capable of melting rock and earth is positioned in the borehole just above seal level. The apparatus is heated to rock-melting temperature and powdered rock or other sealing material is transported down the borehole to the apparatus where it is melted, pooling on the mechanical block and allowed to cool and solidify, sealing the hole. Any length of the borehole can be sealed by slowly raising the apparatus in the borehole while continuously supplying powdered rock to the apparatus to be melted and added to the top of the column of molten and cooling rock, forming a continuous borehole seal. The sealing apparatus consists of a heater capable of melting rock, including means for supplying power to the heater, means for transporting powdered rock down the borehole to the heater, means for cooling the apparatus and means for positioning the apparatus in the borehole. 5 claims, 1 figure

  19. Questionnaire survey of detrimental fur animal epidemic necrotic pyoderma in Finland.

    Science.gov (United States)

    Nordgren, Heli; Vapalahti, Katariina; Vapalahti, Olli; Sukura, Antti; Virtala, Anna-Maija

    2017-08-03

    In 2007, a previously unrecorded disease, fur animal epidemic necrotic pyoderma (FENP), was detected in farmed mink (Neovision vision), foxes (Vulpes lagopus) and Finnraccoons (Nyctereutes procyonoides) in Finland. Symptoms included severe pyoderma with increased mortality, causing both animal welfare problems and economic losses. In 2011, an epidemiologic questionnaire was mailed to all members of the Finnish Fur Breeders' Association to assess the occurrence of FENP from 2009 through the first 6 months of 2011. The aim was to describe the geographical distribution and detailed clinical signs of FENP, as well as sources of infection and potential risk factors for the disease. A total of 239 farmers (25%) returned the questionnaire. Clinical signs of FENP were observed in 40% (95% CI 34-46%) of the study farms. In addition, the survey clarified the specific clinical signs for different animal species. The presence of disease was associated with the importation of mink, especially from Denmark (OR 9.3, 95% CI 2.6-33.0). The transmission route between Finnish farms was associated with fur animal purchases. Some risk factors such as the farm type were also indicated. As such, FENP was detected more commonly on farms with more than one species of fur animal in comparison to farms with, for example, only foxes (OR 4.6, 95% CI 2.4-8.6), and the incidence was higher on farms with over 750 breeder mink compared to smaller farms (OR 3.8, 95% CI 1.6-9.0). Contact between fur animals and birds and other wildlife increased the risk of FENP on farms. Responses also indicated that blocking the entry of wildlife to the animal premises protected against FENP. FENP was most likely introduced to Finland by imported mink and spread further within the country via domestically purchased fur animals. Some potential risk factors, such as the type and size of the farm and contact with wildlife, contributed to the spread of FENP. Escape-proof shelter buildings block the entry of wildlife

  20. Joint seal in tank

    International Nuclear Information System (INIS)

    Colquhoun, J.; White, G.V.

    1981-01-01

    A seal for a joint or gap between edges of adjacent wall sections (e.g. of concrete) of a liquid-containing vessel, such as a nuclear reactor cooling pond, comprises a sheet metal strip having longitudinally-extending edge parts, secured to the respective vessel-section edges, and a central part which is longitudinally corrugated to provide sufficient flexibility to accommodate slight relative movements between the vessel-section edges (e.g. due to thermal expansions). The edges of the sheet metal of the strip are turned in so that the edge parts of the strip are formed as generally U-section channels. These accommodate longitudinally extending securing bars which are bolted to the vessel wall sections by bolts which pass through the bars, through the free-edged wall of the channel section and through a longitudinally extending resilient seal pad compressed between that wall of the channel section and the vessel wall section to which it is secured. The other wall of the channel section (integral with the corrugated central part of the strip) has access windows through which the bolts are inserted and tightened, the windows being then closed off in liquid-tight manner by welding closure caps over them. (author)

  1. Epizoochorous dispersal by ungulates depends on fur, grooming and social interactions.

    Science.gov (United States)

    Liehrmann, Océane; Jégoux, Flore; Guilbert, Marie-Alice; Isselin-Nondedeu, Francis; Saïd, Sonia; Locatelli, Yann; Baltzinger, Christophe

    2018-02-01

    The transport phase of the animal-mediated plant dispersal process is critical to dispersal effectiveness as it determines the spatial distribution of the diaspores released and their chance for further recruitment. Assessing this specific phase of the dispersal process generally requires combining diaspore retention times with the associated distances covered. Here, we specifically tested the effect of grooming behavior, interindividual contacts and ungulate fur on diaspore retention times and associated dispersal distances for the hooked diaspores of Xanthium strumarium L. experimentally attached to tamed individuals of three ungulate species. We used a comparative approach based on differing fur quality on different body zones of these three ungulates. During 6-hr sessions, we monitored for grooming and social interactions that may induce intended or inadvertent diaspore detachment. Additionally, we proposed innovative approaches to directly assessing diaspore dispersal distances by red deer in situ. Fat-tailed functions fitted diaspore retention time, highlighting the potential for long-distance dispersal events. The longer the hair, the higher the retention capacity of diaspores in the animal's fur. As predicted, donkey retained diaspores longer than red deer and dwarf goat; and we also confirmed that diaspores attached to the short hair of the head fell off more quickly than did those on the other body zones. Dwarf goat groomed more often than both red deer and donkey, but also when it carried diaspores. Up to 14% of the diaspores detached from animal fur after specific grooming behavior. We observed, in controlled conditions, for the first time and for each ungulate species, interindividual transfers of diaspores, representing 5% of the diaspores attached to animals' fur. Our results militate for incorporating animal behavior into plant dispersal modeling approaches.

  2. Use of the North Sea by harbour seal with special emphasis on the Horns Reef area. Test of prototype GPS/GSM-transmitter on harbour seals in the Sealarium Esbjerg[Denmark

    Energy Technology Data Exchange (ETDEWEB)

    Tougaard, S.; Tougaard, J.

    2004-04-15

    A combined GPS-receiver and GSM mobile phone transmitter designed for deployment on wild seals was tested on a captive harbour seal. The unit has been under development in recent years and consists of a GPS-unit for positioning and a GSM mobile phone unit for transmission of logged positions to land. The test took place in the Sealarium at the Fisheries and Maritime Museum, Esbjerg. The unit was glued onto the fur on the head of the seal, where it stayed on for 13 days. Only one position was acquired by the unit and it failed to connect to the GSM-net during the test. Technical information from the constructor of the unit is not available and it is thus not possible to conclude on the reasons why the unit did not function as intended. The behaviour of the seal can however, be ruled out, as close observation and registration of the seals dive behaviour during the first days of deployment showed that the unit was free of the water for sufficiently long periods for positions to be acquired. (au)

  3. Use of the North Sea by harbour seal with special emphasis on the Horns Reef area. Test of prototype GPS/GSM-transmitter on harbour seals in the Sealarium Esbjerg

    International Nuclear Information System (INIS)

    Tougaard, S.; Tougaard, J.

    2004-04-01

    A combined GPS-receiver and GSM mobile phone transmitter designed for deployment on wild seals was tested on a captive harbour seal. The unit has been under development in recent years and consists of a GPS-unit for positioning and a GSM mobile phone unit for transmission of logged positions to land. The test took place in the Sealarium at the Fisheries and Maritime Museum, Esbjerg. The unit was glued onto the fur on the head of the seal, where it stayed on for 13 days. Only one position was acquired by the unit and it failed to connect to the GSM-net during the test. Technical information from the constructor of the unit is not available and it is thus not possible to conclude on the reasons why the unit did not function as intended. The behaviour of the seal can however, be ruled out, as close observation and registration of the seals dive behaviour during the first days of deployment showed that the unit was free of the water for sufficiently long periods for positions to be acquired. (au)

  4. Repository Closure and Sealing Approach

    International Nuclear Information System (INIS)

    A.T. Watkins

    2000-01-01

    The scope of this analysis will be to develop the conceptual design of the closure seals and their locations in the Subsurface Facilities. The design will be based on the recently established program requirements for transitioning to the Site Recommendation (SR) design as outlined by ''Approach to Implementing the Site Recommendation Baseline'' (Stroupe 2000) and the ''Monitored Geologic Repository Project Description Document'' (CRWMS M andO 1999b). The objective of this analysis will be to assist in providing a description for the Subsurface Facilities System Description Document, Section 2 and finally to document any conclusions reached in order to contribute and provide support to the SR. This analysis is at a conceptual level and is considered adequate to support the SR design. The final closure barriers and seals for the ventilation shafts, and the north and south ramps will require these openings to be permanently sealed to limit excessive air and water inflows and prevent human intrusion. The major tasks identified with closure in this analysis are: (1) Developing the overall subsurface seal layout and identifying design and operational interfaces for the Subsurface Facilities. (2) Summarizing the general site conditions and general rock characteristic with respect to seal location and describing the seal selected. (3) Identify seal construction materials, methodology of construction and strategic locations including design of the seal and plugs. (4) Discussing methods to prevent human intrusion

  5. Face-Sealing Butterfly Valve

    Science.gov (United States)

    Tervo, John N.

    1992-01-01

    Valve plate made to translate as well as rotate. Valve opened and closed by turning shaft and lever. Interactions among lever, spring, valve plate, and face seal cause plate to undergo combination of translation and rotation so valve plate clears seal during parts of opening and closing motions.

  6. Seals, Concrete Anchors, and Connections

    Science.gov (United States)

    1989-02-01

    caulking compounds, nonhardening extruded tapes, nonhardening mastics, strippable spray coatings, pressure sensitive tapes, gaskets, adhesives, fabrics...films, etc. Although all of these materials may provide a seal, care must be taken when selecting a sealing material as to its chemical and...gaskets have performed satisfactorily. Another factor to be considered in the selection of gasketing material is its compatibility with both the

  7. Research on seal control systems for international nuclear safeguard and the vulnerability assessment on the seals

    International Nuclear Information System (INIS)

    Zhang Hongjian; Liu Tianshu; Cao Fangfang; Xu Chunyan

    2014-01-01

    Safeguard seals, also called Tamper-indicating devices (TIDs), are widely used to detect tampering or unauthorized entry in the international safeguard and security systems, Seal control systems consist of seal implementing plan, seal development and the vulnerability assessment on tbe seals, effective implementing procedures and methods of the seals. The vulnerability assessment contents of safeguard seals, thermo-shrinked film seals being as an example, and seals control systems in the implementation program are researched. The seal control systems discuss task assignment, seals management flow and seals program data flow to promote applying effectively seals. The vulnerability assessment program of seals studies assurance level to some different tampering techniques and measures. The researches must promote utilizing seals effectively for nuclear security, non-proliferation of nuclear weapons, radioactive waste management, and the nuclear material accounting and control. (authors)

  8. Airfoil seal system for gas turbine engine

    Science.gov (United States)

    None, None

    2013-06-25

    A turbine airfoil seal system of a turbine engine having a seal base with a plurality of seal strips extending therefrom for sealing gaps between rotational airfoils and adjacent stationary components. The seal strips may overlap each other and may be generally aligned with each other. The seal strips may flex during operation to further reduce the gap between the rotational airfoils and adjacent stationary components.

  9. Tamper tape seals

    International Nuclear Information System (INIS)

    Wright, B.W.; Undem, H.A.

    1994-07-01

    Tamper tapes are appealing for many applications due to their ease of use and relative robustness. Applications include seals for temporary area denial, protection of sensitive equipment, chain-of-custody audit trails, and inventory control practices. A next generation of adhesive tamper tapes is being developed that combines the best features of commercially available devices with additional state-of-the-art features in tamper indication, tamper-resistance, and counterfeit-resistance. The additional features are based on U.S. Department of Energy (DOE) research and development (R ampersand D) activities that were originally associated with preparations for the Strategic Arms Reduction Treaty (START). New features include rapid-set, chemical-cure adhesive systems that allow user-friendly application and layered levels of counterfeit-resistance based on unique open-quotes fingerprintclose quotes characteristics that can be accessed as desired

  10. High pressure mechanical seal

    Science.gov (United States)

    Babel, Henry W. (Inventor); Anderson, Raymond H. (Inventor)

    1996-01-01

    A relatively impervious mechanical seal is formed between the outer surface of a tube and the inside surface of a mechanical fitting of a high pressure fluid or hydraulic system by applying a very thin soft metal layer onto the outer surface of the hard metal tube and/or inner surface of the hard metal fitting. The thickness of such thin metal layer is independent of the size of the tube and/or fittings. Many metals and alloys of those metals exhibit the requisite softness, including silver, gold, tin, platinum, indium, rhodium and cadmium. Suitably, the coating is about 0.0025 millimeters (0.10 mils) in thickness. After compression, the tube and fitting combination exhibits very low leak rates on the order or 10.sup.-8 cubic centimeters per second or less as measured using the Helium leak test.

  11. Turbine and Structural Seals Team Facilities

    Data.gov (United States)

    Federal Laboratory Consortium — Seals Team Facilities conceive, develop, and test advanced turbine seal concepts to increase efficiency and durability of turbine engines. Current projects include...

  12. Development of a Regional Glycerol Dialkyl Glycerol Tetraether (GDGT) - Temperature Calibration for Antarctic and sub-Antarctic Lakes

    Science.gov (United States)

    Roberts, S. J.; Foster, L. C.; Pearson, E. J.; Steve, J.; Hodgson, D.; Saunders, K. M.; Verleyen, E.

    2016-12-01

    Temperature calibration models based on the relative abundances of sedimentary glycerol dialkyl glycerol tetraethers (GDGTs) have been used to reconstruct past temperatures in both marine and terrestrial environments, but have not been widely applied in high latitude environments. This is mainly because the performance of GDGT-temperature calibrations at lower temperatures and GDGT provenance in many lacustrine settings remains uncertain. To address these issues, we examined surface sediments from 32 Antarctic, sub-Antarctic and Southern Chilean lakes. First, we quantified GDGT compositions present and then investigated modern-day environmental controls on GDGT composition. GDGTs were found in all 32 lakes studied. Branched GDGTs (brGDGTs) were dominant in 31 lakes and statistical analyses showed that their composition was strongly correlated with mean summer air temperature (MSAT) rather than pH, conductivity or water depth. Second, we developed the first regional brGDGT-temperature calibration for Antarctic and sub-Antarctic lakes based on four brGDGT compounds (GDGT-Ib, GDGT-II, GDGT-III and GDGT-IIIb). Of these, GDGT-IIIb proved particularly important in cold lacustrine environments. Our brGDGT-Antarctic temperature calibration dataset has an improved statistical performance at low temperatures compared to previous global calibrations (r2=0.83, RMSE=1.45°C, RMSEP-LOO=1.68°C, n=36 samples), highlighting the importance of basing palaeotemperature reconstructions on regional GDGT-temperature calibrations, especially if specific compounds lead to improved model performance. Finally, we applied the new Antarctic brGDGT-temperature calibration to two key lake records from the Antarctic Peninsula and South Georgia. In both, downcore temperature reconstructions show similarities to known Holocene warm periods, providing proof of concept for the new Antarctic calibration model.

  13. Additional foraging elements reduce abnormal behaviour – fur-chewing and stereotypic behaviour – in farmed mink (Neovison vison)

    DEFF Research Database (Denmark)

    Malmkvist, Jens; Palme, Rupert; Svendsen, Pernille Maj

    2013-01-01

    We investigated whether provision of additional appetitive and consummatory elements of foraging reduces baseline stress and abnormal behaviour – in terms of fur-chewing and stereotypic behaviour – in farmed mink. We studied 200 juveniles (n = 100 females and 100 males) during the 5-month growth......; (iii) CONS, chunky feed (parts up to 42 mm), replacing conventional feed; (iv) BOTH, access to both biting ropes and chunky feed. In growing mink, biting ropes reduced fur-chewing (P = 0.044) and chunky feed reduced stereotypic behaviour (P = 0.038) and fur-chewing in female mink (P = 0.019). During......, stereotypic behaviour was reduced by provision of chunky feed, increasing the consummatory element in daily foraging. Fur-chewing was reduced upon access to either biting ropes or chunky feed in female mink throughout the study. Our findings support frustrated foraging, mainly consummatory, behind abnormal...

  14. Identifying QTL and genetic correlations between fur quality traits in mink (Neovison vison)

    DEFF Research Database (Denmark)

    Thirstrup, Janne Pia; Anistoroaei, Razvan Marian; Guldbrandtsen, Bernt

    2014-01-01

    Mapping of QTL affecting fur quality traits (guard hair length, guard hair thickness, density of wool, surface of the fur and quality) and skin length was performed in a three-generation mink population (F2 design). In the parental generation, Nordic Brown mink were crossed reciprocally with Amer......Mapping of QTL affecting fur quality traits (guard hair length, guard hair thickness, density of wool, surface of the fur and quality) and skin length was performed in a three-generation mink population (F2 design). In the parental generation, Nordic Brown mink were crossed reciprocally...... with American Black short nap mink. In all, 1082 mink encompassing three generations were used for the analyses. The mink were genotyped for 104 microsatellites covering all 14 autosomes. The QTL analyses were performed by least-square regression implemented in gridqtl software. Genetic and phenotypic...

  15. Inactivation of ferric uptake regulator (Fur) attenuates Helicobacter pylori J99 motility by disturbing the flagellar motor switch and autoinducer-2 production.

    Science.gov (United States)

    Lee, Ai-Yun; Kao, Cheng-Yen; Wang, Yao-Kuan; Lin, Ssu-Yuan; Lai, Tze-Ying; Sheu, Bor-Shyang; Lo, Chien-Jung; Wu, Jiunn-Jong

    2017-08-01

    Flagellar motility of Helicobacter pylori has been shown to be important for the bacteria to establish initial colonization. The ferric uptake regulator (Fur) is a global regulator that has been identified in H. pylori which is involved in the processes of iron uptake and establishing colonization. However, the role of Fur in H. pylori motility is still unclear. Motility of the wild-type, fur mutant, and fur revertant J99 were determined by a soft-agar motility assay and direct video observation. The bacterial shape and flagellar structure were evaluated by transmission electron microscopy. Single bacterial motility and flagellar switching were observed by phase-contrast microscopy. Autoinducer-2 (AI-2) production in bacterial culture supernatant was analyzed by a bioluminescence assay. The fur mutant showed impaired motility in the soft-agar assay compared with the wild-type J99 and fur revertant. The numbers and lengths of flagellar filaments on the fur mutant cells were similar to those of the wild-type and revertant cells. Phenotypic characterization showed similar swimming speed but reduction in switching rate in the fur mutant. The AI-2 production of the fur mutant was dramatically reduced compared with wild-type J99 in log-phase culture medium. These results indicate that Fur positively modulates H. pylori J99 motility through interfering with bacterial flagellar switching. © 2017 John Wiley & Sons Ltd.

  16. Leak detection of KNI seals

    International Nuclear Information System (INIS)

    Baranyai, G.; Peter, A.; Windberg, P.

    1990-03-01

    In Unit 3 and 4 of the Paks Nuclear Power Plant, Hungary, KNI type seals are used as lead-throughs with conical nickel sealing rings. Their failure can be critical for the operation of the reactor. An Acoustical Leak Detection System (ALDS) was constructed and tested for the operational testing of the seals. Some individual papers are presented in this collection on the calibration and testing of the ALDS intended to be placed on the top of the reactor vessels. The papers include simulation measurements of Unit 3 of NPP, laboratory experiments, evaluation of measurements, and further development needs with the ALDS. (R.P.) 50 figs.; 19 tabs

  17. Silicone foam for penetration seal

    International Nuclear Information System (INIS)

    Hoshino, Yoshikazu

    1986-01-01

    In nuclear power plants or general buildings, it is very important to form a fire-resistant seal around cables, cable trays and conduits passing through a wall or a floor. Rockwool, asbestos, glasswool and flame-retarded urethane foam have so far been used for these purposes. However, they were not satisfactory in sealing property, workability and safety. The silicone foam newly developed, ''TOSSEAL'' 300, has cleared these defects. It has now come to be used for fire resistant seal in nuclear power plants. (author)

  18. Cryptosporidium spp. em furão (Mustela putorius furo) no sul do Brasil

    OpenAIRE

    Fanfa, Vinicius da Rosa; Farret, Matheus Hillard; Silva, Aleksandro Schafer da; Monteiro, Silvia Gonzalez

    2010-01-01

    http://dx.doi.org/10.5007/2175-7925.2010v23n1p225 Este trabalho visou avaliar o parasitismo gastrintestinal em furão (Mustela putorius furo) mantido em cativeiro no sul do Brasil. Foram analisadas fezes de dois furões, macho e fêmea, com três anos de idade, através das técnicas de exame direto, centrífugo-flutuação com sulfato de zinco e a coloração pelo método de Kinyoun para pesquisa de parasitos. Nas amostras constatou-se a presença de oocistos de Cryptosporidium spp. Este caso refere-...

  19. Role of the Fur regulon in iron transport in Bacillus subtilis.

    Science.gov (United States)

    Ollinger, Juliane; Song, Kyung-Bok; Antelmann, Haike; Hecker, Michael; Helmann, John D

    2006-05-01

    The Bacillus subtilis ferric uptake regulator (Fur) protein mediates the iron-dependent repression of at least 20 operons encoding approximately 40 genes. We investigated the physiological roles of Fur-regulated genes by the construction of null mutations in 14 transcription units known or predicted to function in siderophore biosynthesis or iron uptake. We demonstrate that ywbLMN, encoding an elemental iron uptake system orthologous to the copper oxidase-dependent Fe(III) uptake system of Saccharomyces cerevisiae, is essential for growth in low iron minimal medium lacking citric acid. 2,3-Dihydroxybenzoyl-glycine (Itoic acid), the siderophore precursor produced by laboratory strains of B. subtilis, is of secondary importance. In the presence of citrate, the YfmCDEF ABC transporter is required for optimal growth. B. subtilis is unable to grow in minimal medium containing the iron chelator EDDHA unless the ability to synthesize the intact bacillibactin siderophore is restored (by the introduction of a functional sfp gene) or exogenous siderophores are provided. Utilization of the catecholate siderophores bacillibactin and enterobactin requires the FeuABC importer and the YusV ATPase. Utilization of hydroxamate siderophores requires the FhuBGC ABC transporter together with the FhuD (ferrichrome) or YxeB (ferrioxamine) substrate-binding proteins. Growth with schizokinen or arthrobactin is at least partially dependent on the YfhA YfiYZ importer and the YusV ATPase. We have also investigated the effects of a fur mutation on the proteome and documented the derepression of 11 Fur-regulated proteins, including a newly identified thioredoxin reductase homolog, YcgT.

  20. A small galliform bird from the Lower Eocene Fur Formation, northwestern Denmark

    DEFF Research Database (Denmark)

    Lindow, Bent Erik Kramer; Dyke, Gareth John

    2007-01-01

    A pair of fossilized imprints of feet represent the first published galliform (landfowl) specimen from the Lower Eocene Fur Formation of northwest Denmark. The specimen is referable to Galliformes due to the presence of a distinctly asymmetric trochlea metatarsi III. The specimen appears distinct...... from previously described Eocene Galliformes (e.g. Gallinuloididae, Quercymegapodiidae and Paraortygidae) and may represent a new taxon of Galliformes, increasing the diversity of this group in the Lower Eocene....

  1. Revisiting Caroline Furness's An Introduction to the Study of Variable Stars on its Centenary (Poster abstract)

    Science.gov (United States)

    Larsen, K.

    2016-06-01

    (Abstract only) A century and one month ago (October 1915) Dr. Caroline Ellen Furness (1869-1936), Director of the Vassar College Observatory, published An Introduction to the Study of Variable Stars. Issued in honor of the fiftieth anniversary of the founding of Vassar College, the work was meant to fill a void in the literature, namely as both an introduction to the topic of variable stars and as a manual explaining how they should be observed and the resulting data analyzed. It was judged to be one of the hundred best books written by an American woman in the last hundred years at the 1933 World's Fair in Chicago. The book covers the relevant history of and background on types of variable stars, star charts, catalogs, and the magnitude scale, then describes observing techniques, including visual, photographic, and photoelectric photometry. The work finishes with a discussion of light curves and patterns of variability, with a special emphasis on eclipsing binaries and long period variables. Furness's work is a valuable snapshot of the state of astronomical knowledge, technology, and observing techniques from a century ago. This presentation will analyze both Furness's book and its reception in the scientific community, and draw parallels to current advice given to beginning variable star observers.

  2. Sand Floor for Farmed Blue Foxes: Effects on Claws, Adrenal Cortex Function, Growth and Fur Properties

    Directory of Open Access Journals (Sweden)

    Leena Ahola

    2009-01-01

    Full Text Available Farmed blue foxes (Vulpes lagopus are traditionally housed on mesh floors where they are unable to perform certain species-specific behaviours, such as digging, which may compromise the animals' welfare. This study describes how a possibility to use in-cage sand floor affects welfare-related variables like growth of the claws, adrenal cortex function, and fur properties in juvenile blue foxes. The foxes (N=32 were housed in male-female sibling pairs in an outdoor fur animal shed in cage systems consisting of two traditional fox cages. For the eight male-female sibling pairs of the Control group, there was a mesh floor in both cages of each cage system, whereas for the eight pairs of the Sand group there was a mesh floor in one cage and a 30–40 cm deep earth floor in the other cage. The results show that sand floor is beneficial for the wearing of the claws of foxes. Furthermore, an early experience of sand floor may have positive effects on the foxes' fur development. The results, however, also suggest that there might appear welfare problems observed as disturbed claw growth and increased adrenal cortex activation if foxes that are once provided with clean and unfrozen sand floor are not allowed to enjoy this floor all the time.

  3. Arcanobacterium phocae infection in mink (Neovison vison), seals (Phoca vitulina, Halichoerus grypus) and otters (Lutra lutra)

    DEFF Research Database (Denmark)

    Nonnemann, Bettina; Chriél, Mariann; Larsen, Gitte

    2017-01-01

    pathological conditions, and from wild seals and otters. In 2015, A. phocae was isolated for the first time in Denmark from outbreaks of dermatitis in mink farms. The outbreaks affected at least 12 farms. Originating from these 12 farms, 23 animals cultured positive for A. phocae. The main clinical findings......Infectious skin disorders are not uncommon in mink. Such disorders are important as they have a negative impact on animal health and welfare as well as on the quality and value of the fur. This study presents the isolation of Arcanobacterium phocae from mink with severe skin lesions and other...... were necrotizing pododermatitis or dermatitis located to other body sites, such as the lumbar and cervical regions. A. phocae could be isolated from skin lesions and in nine animals also from liver, spleen and lung, indicating a systemic spread. The bacterium was also, for the first time in Denmark...

  4. Seal coat binder performance specifications.

    Science.gov (United States)

    2013-11-01

    Need to improve seal coat binder specs: replace empirical tests (penetration, ductility) with : performance-related tests applicable to both : unmodified and modified binders; consider temperatures that cover entire in service : range that are tied t...

  5. Alaska Harbor Seal Glacial Surveys

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Floating glacial ice serves as a haul-out substrate for a significant number (10-15%) of Alaskan harbor seals, and thus surveying tidewater glacial fjords is an...

  6. Coupled processes in repository sealing

    International Nuclear Information System (INIS)

    Case, J.B.; Kelsall, P.C.

    1985-01-01

    The significance of coupled processes in repository sealing is evaluated. In most repository designs, shaft seals will be located in areas of relatively low temperature perturbation, in which case the coupling of temperature with stress and permeability may be less significant than the coupling between stress and permeability that occurs during excavation. Constitutive relationships between stress and permeability are reviewed for crystalline rock and rocksalt. These provide a basis for predicting the development of disturbed zones near excavations. Field case histories of the degree of disturbance are presented for two contrasting rock types - Stripa granite and Southeastern New Mexico rocksalt. The results of field investigations in both rock types confirm that hydraulic conductivity or permeability is stress dependent, and that shaft seal performance may be related to the degree that stresses are perturbed and restored near the seal

  7. Long-Term Seasonal and Interannual Patterns of Marine Mammal Strandings in Subtropical Western South Atlantic

    Science.gov (United States)

    Prado, Jonatas H. F.; Mattos, Paulo H.; Silva, Kleber G.; Secchi, Eduardo R.

    2016-01-01

    Understanding temporal patterns of marine mammal occurrence is useful for establishing conservation strategies. We used a 38 yr-long dataset spanning 1976 to 2013 to describe temporal patterns and trends in marine mammal strandings along a subtropical stretch of the east coast of South America. This region is influenced by a transitional zone between tropical and temperate waters and is considered an important fishing ground off Brazil. Generalized Additive Models were used to evaluate the temporal stranding patterns of the most frequently stranded species. Forty species were documented in 12,540 stranding events. Franciscana (n = 4,574), South American fur seal, (n = 3,419), South American sea lion (n = 2,049), bottlenose dolphins (n = 293) and subantarctic fur seal (n = 219) were the most frequently stranded marine mammals. The seasonality of strandings of franciscana and bottlenose dolphin coincided with periods of higher fishing effort and strandings of South American and subantarctic fur seals with post-reproductive dispersal. For South American sea lion the seasonality of strandings is associated with both fishing effort and post-reproductive dispersal. Some clear seasonal patterns were associated with occurrence of cold- (e.g. subantarctic fur seal) and warm-water (e.g. rough-toothed dolphin) species in winter and summer, respectively. Inter-annual increases in stranding rate were observed for franciscana and South American fur seal and these are likely related to increased fishing effort and population growth, respectively. For subantarctic fur seal the stranding rate showed a slight decline while for bottlenose dolphin it remained steady. No significant year to year variation in stranding rate was observed for South American sea lion. The slight decrease in frequency of temperate/polar marine mammals and the increased occurrence of subtropical/tropical species since the late 1990s might be associated with environmental changes linked to climate change

  8. Long-Term Seasonal and Interannual Patterns of Marine Mammal Strandings in Subtropical Western South Atlantic.

    Directory of Open Access Journals (Sweden)

    Jonatas H F Prado

    Full Text Available Understanding temporal patterns of marine mammal occurrence is useful for establishing conservation strategies. We used a 38 yr-long dataset spanning 1976 to 2013 to describe temporal patterns and trends in marine mammal strandings along a subtropical stretch of the east coast of South America. This region is influenced by a transitional zone between tropical and temperate waters and is considered an important fishing ground off Brazil. Generalized Additive Models were used to evaluate the temporal stranding patterns of the most frequently stranded species. Forty species were documented in 12,540 stranding events. Franciscana (n = 4,574, South American fur seal, (n = 3,419, South American sea lion (n = 2,049, bottlenose dolphins (n = 293 and subantarctic fur seal (n = 219 were the most frequently stranded marine mammals. The seasonality of strandings of franciscana and bottlenose dolphin coincided with periods of higher fishing effort and strandings of South American and subantarctic fur seals with post-reproductive dispersal. For South American sea lion the seasonality of strandings is associated with both fishing effort and post-reproductive dispersal. Some clear seasonal patterns were associated with occurrence of cold- (e.g. subantarctic fur seal and warm-water (e.g. rough-toothed dolphin species in winter and summer, respectively. Inter-annual increases in stranding rate were observed for franciscana and South American fur seal and these are likely related to increased fishing effort and population growth, respectively. For subantarctic fur seal the stranding rate showed a slight decline while for bottlenose dolphin it remained steady. No significant year to year variation in stranding rate was observed for South American sea lion. The slight decrease in frequency of temperate/polar marine mammals and the increased occurrence of subtropical/tropical species since the late 1990s might be associated with environmental changes linked to

  9. Design considerations for mechanical face seals

    Science.gov (United States)

    Ludwig, L. P.; Greiner, H. F.

    1980-01-01

    Two companion reports deal with design considerations for improving performance of mechanical face seals, one of family of devices used in general area of fluid sealing of rotating shafts. One report deals with basic seal configuration and other with lubrication of seal.

  10. Seals Research at AlliedSignal

    Science.gov (United States)

    Ullah, M. Rifat

    1996-01-01

    A consortium has been formed to address seal problems in the Aerospace sector of Allied Signal, Inc. The consortium is represented by makers of Propulsion Engines, Auxiliary Power Units, Gas Turbine Starters, etc. The goal is to improve Face Seal reliability, since Face Seals have become reliability drivers in many of our product lines. Several research programs are being implemented simultaneously this year. They include: Face Seal Modeling and Analysis Methodology; Oil Cooling of Seals; Seal Tracking Dynamics; Coking Formation & Prevention; and Seal Reliability Methods.

  11. Sealing Failure Analysis on V-Shaped Sealing Rings of an Inserted Sealing Tool Used for Multistage Fracturing Processes

    Directory of Open Access Journals (Sweden)

    Gang Hu

    2018-06-01

    Full Text Available The inserted sealing tool is a critical downhole implement that is used to balance the downhole pressure in multistage fracturing operations and prevent fracturing fluid from overflow and/or backward flow. The sealing ring of an inserted sealing tool plays an important role in downhole sealing since a sealing failure would ail the fracturing operation. In order to improve the sealing performance and reduce the potential fracturing failures, this research aims to investigate the influence of V-shaped sealing ring geometries on sealing performance. Constitutive experiments of rubber materials were carried out and the parameters of the constitutive relationship of rubber materials were obtained. A two-dimensional axisymmetric model considering the sealing ring has been established and influences are investigated with considerations of various system parameters and operating conditions. It is found that the stresses concentrated at the shoulder and inner vertex of the sealing ring have direct impact on the damage of the sealing rings under operational conditions. Moreover, the sealing interference, among several other factors, greatly affects the life of the sealing ring. A new design of the sealing ring is suggested with optimized geometric parameters. Its geometric parameters are the edge height of 5 mm, the vertex angle of 90°–100°, and the interference of 0.1 mm, which show a better performance and prolonged operation life of the sealing ring.

  12. Sealed can of spent fuel

    International Nuclear Information System (INIS)

    Suzuki, Yasuyuki.

    1976-01-01

    Object: To provide a seal plug cover with a gripping portion fitted to a canning machine and a gripping portion fitted to a gripper of the same configuration as a fuel body for handling the fuel body so as to facilitate the handling work. Structure: A sealed can comprises a vessel and a seal plug cover, said cover being substantially in the form of a bottomed cylinder, which is slipped on the vessel and air-tightly secured by a fastening bolt between it and a flange. The spent fuel body is received into the vessel together with coolant during the step of canning operation. Said seal plug cover has two gripping portions, one for opening and closing the plug cover of the canning machine as an exclusive use member, the other being in the form of a hook-shaped peripheral groove, whereby the gripping portions may be effectively used using the same gripper when the spent fuel body is transported while being received in the sealed can or when the fuel body is removed from the sealed can. (Kawakami, Y.)

  13. Reusable, tamper-indicating seal

    International Nuclear Information System (INIS)

    Ryan, M.J.

    1978-01-01

    A reusable, tamper-indicating seal is comprised of a drum confined within a fixed body and rotatable in one direction therewithin, the top of the drum constituting a tray carrying a large number of small balls of several different colors. The fixed body contains parallel holes for looping a seal wire therethrough. The base of the drums carries cams adapted to coact with cam followers to lock the wire within the seal at one angular position of the drum. A channel in the fixed body, visible from outside the seal, adjacent the tray constitutes a segregated location for a small plurality of the colored balls. A spring in the tray forces colored balls into the segregated location at one angular position of the drum, further rotation securing the balls in position and the wires in the seal. A wedge-shaped plough removes the balls from the segregated location, at a different angular position of the drum, the wire being unlocked at the same postion. A new pattern of colored balls will appear in the segregated location when the seal is relocked

  14. Hydrodynamic perception in true seals (Phocidae) and eared seals (Otariidae).

    Science.gov (United States)

    Hanke, Wolf; Wieskotten, Sven; Marshall, Christopher; Dehnhardt, Guido

    2013-06-01

    Pinnipeds, that is true seals (Phocidae), eared seals (Otariidae), and walruses (Odobenidae), possess highly developed vibrissal systems for mechanoreception. They can use their vibrissae to detect and discriminate objects by direct touch. At least in Phocidae and Otariidae, the vibrissae can also be used to detect and analyse water movements. Here, we review what is known about this ability, known as hydrodynamic perception, in pinnipeds. Hydrodynamic perception in pinnipeds developed convergently to the hydrodynamic perception with the lateral line system in fish and the sensory hairs in crustaceans. So far two species of pinnipeds, the harbour seal (Phoca vitulina) representing the Phocidae and the California sea lion (Zalophus californianus) representing the Otariidae, have been studied for their ability to detect local water movements (dipole stimuli) and to follow hydrodynamic trails, that is the water movements left behind by objects that have passed by at an earlier point in time. Both species are highly sensitive to dipole stimuli and can follow hydrodynamic trails accurately. In the individuals tested, California sea lions were clearly more sensitive to dipole stimuli than harbour seals, and harbour seals showed a superior trail following ability as compared to California sea lions. Harbour seals have also been shown to derive additional information from hydrodynamic trails, such as motion direction, size and shape of the object that caused the trail (California sea lions have not yet been tested). The peculiar undulated shape of the harbour seals' vibrissae appears to play a crucial role in trail following, as it suppresses self-generated noise while the animal is swimming.

  15. Spray sealing: A breakthrough in integral fuel tank sealing technology

    Science.gov (United States)

    Richardson, Martin D.; Zadarnowski, J. H.

    1989-11-01

    In a continuing effort to increase readiness, a new approach to sealing integral fuel tanks is being developed. The technique seals potential leak sources by spraying elastomeric materials inside the tank cavity. Laboratory evaluations project an increase in aircraft supportability and reliability, an improved maintainability, decreasing acquisition and life cycle costs. Increased usable fuel volume and lower weight than conventional bladders improve performance. Concept feasibility was demonstrated on sub-scale aircraft fuel tanks. Materials were selected by testing sprayable elastomers in a fuel tank environment. Chemical stability, mechanical properties, and dynamic durability of the elastomer are being evaluated at the laboratory level and in sub-scale and full scale aircraft component fatigue tests. The self sealing capability of sprayable materials is also under development. Ballistic tests show an improved aircraft survivability, due in part to the elastomer's mechanical properties and its ability to damp vibrations. New application equipment, system removal, and repair methods are being investigated.

  16. Late Holocene intensification of the westerly winds at the subantarctic Auckland Islands (51° S, New Zealand

    Directory of Open Access Journals (Sweden)

    I. M. Browne

    2017-10-01

    Full Text Available The Southern Hemisphere westerly winds (SHWWs play a major role in controlling wind-driven upwelling of Circumpolar Deep Water (CDW and outgassing of CO2 in the Southern Ocean, on interannual to glacial–interglacial timescales. Despite their significance in the global carbon cycle, our understanding of millennial- and centennial-scale changes in the strength and latitudinal position of the westerlies during the Holocene (especially since 5000 yr BP is limited by a scarcity of palaeoclimate records from comparable latitudes. Here, we reconstruct middle to late Holocene SHWW variability using a fjord sediment core collected from the subantarctic Auckland Islands (51° S, 166° E, located in the modern centre of the westerly wind belt. Changes in drainage basin response to variability in the strength of the SHWW at this latitude are interpreted from downcore variations in magnetic susceptibility (MS and bulk organic δ13C and atomic C ∕ N, which monitor influxes of lithogenous and terrestrial vs. marine organic matter, respectively. The fjord water column response to SHWW variability is evaluated using benthic foraminifer δ18O and δ13C, both of which are influenced by the isotopic composition of shelf water masses entering the fjord. Using these data, we provide marine and terrestrial-based evidence for increased wind strength from  ∼  1600 to 900 yr BP at subantarctic latitudes that is broadly consistent with previous studies of climate-driven vegetation change at the Auckland Islands. Comparison with a SHWW reconstruction using similar proxies from Fiordland suggests a northward migration of the SHWW over New Zealand during the first half of the last millennium. Comparison with palaeoclimate and palaeoceanographic records from southern South America and West Antarctica indicates a late Holocene strengthening of the SHWW after  ∼  1600 yr BP that appears to be broadly symmetrical across the Pacific Basin

  17. Late Holocene intensification of the westerly winds at the subantarctic Auckland Islands (51° S), New Zealand

    Science.gov (United States)

    Browne, Imogen M.; Moy, Christopher M.; Riesselman, Christina R.; Neil, Helen L.; Curtin, Lorelei G.; Gorman, Andrew R.; Wilson, Gary S.

    2017-10-01

    The Southern Hemisphere westerly winds (SHWWs) play a major role in controlling wind-driven upwelling of Circumpolar Deep Water (CDW) and outgassing of CO2 in the Southern Ocean, on interannual to glacial-interglacial timescales. Despite their significance in the global carbon cycle, our understanding of millennial- and centennial-scale changes in the strength and latitudinal position of the westerlies during the Holocene (especially since 5000 yr BP) is limited by a scarcity of palaeoclimate records from comparable latitudes. Here, we reconstruct middle to late Holocene SHWW variability using a fjord sediment core collected from the subantarctic Auckland Islands (51° S, 166° E), located in the modern centre of the westerly wind belt. Changes in drainage basin response to variability in the strength of the SHWW at this latitude are interpreted from downcore variations in magnetic susceptibility (MS) and bulk organic δ13C and atomic C / N, which monitor influxes of lithogenous and terrestrial vs. marine organic matter, respectively. The fjord water column response to SHWW variability is evaluated using benthic foraminifer δ18O and δ13C, both of which are influenced by the isotopic composition of shelf water masses entering the fjord. Using these data, we provide marine and terrestrial-based evidence for increased wind strength from ˜ 1600 to 900 yr BP at subantarctic latitudes that is broadly consistent with previous studies of climate-driven vegetation change at the Auckland Islands. Comparison with a SHWW reconstruction using similar proxies from Fiordland suggests a northward migration of the SHWW over New Zealand during the first half of the last millennium. Comparison with palaeoclimate and palaeoceanographic records from southern South America and West Antarctica indicates a late Holocene strengthening of the SHWW after ˜ 1600 yr BP that appears to be broadly symmetrical across the Pacific Basin. Contemporaneous increases in SHWW at localities on either

  18. Submarine glacial landforms and interactions with volcanism around Sub-Antarctic Heard and McDonald Islands

    Science.gov (United States)

    Picard, K.; Watson, S. J.; Fox, J. M.; Post, A.; Whittaker, J. M.; Lucieer, V.; Carey, R.; Coffin, M. F.; Hodgson, D.; Hogan, K.; Graham, A. G. C.

    2017-12-01

    Unravelling the glacial history of Sub-Antarctic islands can provide clues to past climate and Antarctic ice sheet stability. The glacial history of many sub-Antarctic islands is poorly understood, including the Heard and McDonald Islands (HIMI) located on the Kerguelen Plateau in the southern Indian Ocean. The geomorphologic development of HIMI has involved a combination of construction via hotspot volcanism and mechanical erosion caused by waves, weather, and glaciers. Today, the 2.5 km2 McDonald Islands are not glacierised; in contrast, the 368 km2 Heard Island has 12 major glaciers, some extending from the summit of 2813 m to sea level. Historical accounts from Heard Island suggest that the glaciers were more extensive in the 1850s to 1870s, and have retreated at least 12% (33.89 km2) since 1997. However, surrounding bathymetry suggests a much more extensive previous glaciation of the HIMI region that encompassed 9,585 km2, likely dating back at least to the Last Glacial Maximum (LGM) ca. 26.5 -19 ka. We present analyses of multibeam bathymetry and backscatter data, acquired aboard RV Investigator in early 2016, that support the previous existence of an extensive icecap. These data reveal widespread ice-marginal and subglacial features including moraines, over-deepened troughs, drumlins and crag-and-tails. Glacial landforms suggest paleo-ice flow directions and a glacial extent that are consistent with previously documented broad scale morphological features. We identify >660 iceberg keel scours in water depths ranging from 150 - 530 m. The orientations of the iceberg keel scours reflect the predominantly east-flowing Antarctic Circumpolar Current and westerly winds in the region. 40Ar/39Ar dating of volcanic rocks from submarine volcanoes around McDonald Islands suggests that volcanism and glaciation coincided. The flat-topped morphology of these volcanoes may result from lava-ice interaction or erosion by glaciers post eruption during a time of extensive ice

  19. Seal Related Development Activities at EG/G

    Science.gov (United States)

    Greiner, Harold F.

    1991-01-01

    Seal related development activities including modeling, analysis, and performance testing are described for several current seal related projects. Among the current seal related projects are the following: high pressure gas sealing systems for turbomachinery; brush seals for gas path sealing in gas turbines; and tribological material evaluation for wear surfaces in sealing systems.

  20. Radioactive material package seal tests

    International Nuclear Information System (INIS)

    Madsen, M.M.; Humphreys, D.L.; Edwards, K.R.

    1990-01-01

    General design or test performance requirements for radioactive materials (RAM) packages are specified in Title 10 of the US Code of Federal Regulations Part 71 (US Nuclear Regulatory Commission, 1983). The requirements for Type B packages provide a broad range of environments under which the system must contain the RAM without posing a threat to health or property. Seals that provide the containment system interface between the packaging body and the closure must function in both high- and low-temperature environments under dynamic and static conditions. A seal technology program, jointly funded by the US Department of Energy Office of Environmental Restoration and Waste Management (EM) and the Office of Civilian Radioactive Waste Management (OCRWM), was initiated at Sandia National Laboratories. Experiments were performed in this program to characterize the behavior of several static seal materials at low temperatures. Helium leak tests on face seals were used to compare the materials. Materials tested include butyl, neoprene, ethylene propylene, fluorosilicone, silicone, Eypel, Kalrez, Teflon, fluorocarbon, and Teflon/silicone composites. Because most elastomer O-ring applications are for hydraulic systems, manufacturer low-temperature ratings are based on methods that simulate this use. The seal materials tested in this program with a fixture similar to a RAM cask closure, with the exception of silicone S613-60, are not leak tight (1.0 x 10 -7 std cm 3 /s) at manufacturer low-temperature ratings. 8 refs., 3 figs., 1 tab

  1. Mechanical seal with textured sidewall

    Energy Technology Data Exchange (ETDEWEB)

    Khonsari, Michael M.; Xiao, Nian

    2017-02-14

    The present invention discloses a mating ring, a primary ring, and associated mechanical seal having superior heat transfer and wear characteristics. According to an exemplary embodiment of the present invention, one or more dimples are formed onto the cylindrical outer surface of a mating ring sidewall and/or a primary ring sidewall. A stationary mating ring for a mechanical seal assembly is disclosed. Such a mating ring comprises an annular body having a central axis and a sealing face, wherein a plurality of dimples are formed into the outer circumferential surface of the annular body such that the exposed circumferential surface area of the annular body is increased. The texture added to the sidewall of the mating ring yields superior heat transfer and wear characteristics.

  2. Turbine interstage seal with self-balancing capability

    Science.gov (United States)

    Mills, Jacob A; Jones, Russell B; Sexton, Thomas D

    2017-09-26

    An interstage seal for a turbine of a gas turbine engine, the interstage seal having a seal carrier with an axial extending seal tooth movable with a stator of the engine, and a rotor with a seal surface that forms the interstage seal with the seal tooth, where a magnetic force produced by two magnets and a gas force produced by a gas pressure acting on the seal carrier forms a balancing force to maintain a close clearance of the seal without the seal tooth contacting the rotor seal surfaces during engine operation. In other embodiments, two pairs of magnets produce first and second magnetic forces that balance the seal in the engine.

  3. EBR-II rotating plug seal maintenance

    International Nuclear Information System (INIS)

    Allen, K.J.

    1986-01-01

    The EBR-II rotating plug seals require frequent cleaning and maintenance to keep the plugs from sticking during fuel handling. Time consuming cleaning on the cover gas and air sides of the dip ring seal is required to remove oxidation and sodium reaction products that accumulate and stop plug rotation. Despite severely limited access, effective seal cleaning techniques have removed 11 800 lb (5 352 kg) of deposits from the seals since 1964. Temperature control modifications and repairs have also required major maintenance work. Suggested seal design recommendations could significantly reduce maintenance on future similar seals

  4. Self-acting and hydrodynamic shaft seals

    Science.gov (United States)

    Ludwig, L. P.

    1973-01-01

    Self-acting and hydrodynamic seals are described. The analytical procedures are outlined for obtaining a seal force balance and the operating film thickness. Particular attention is given to primary ring response (seal vibration) to rotating seat face runout. This response analysis revealed three different vibration modes. Proposed applications of self-acting seals in gas turbine engines and in rocket vehicle turbopumps are described. Also experimental data on self-acting face seals operating under simulated gas turbine conditions are given; these data show the feasibility of operating the seal at conditions of 345 newtons per square centimeter (500 psi) and 152 meters per second (500 ft/sec) sliding speed.

  5. Sealed source peer review plan

    International Nuclear Information System (INIS)

    Feldman, Alexander; Leonard, Lee; Burns, Ron

    2009-01-01

    Sealed sources are known quantities of radioactive materials that have been encapsulated in quantities that produce known radiation fields. Sealed sources have multiple uses ranging from instrument calibration sources to sources that produce radiation fields for experimental applications. The Off-Site Source Recovery (OSR) Project at Los Alamos National Laboratory (LANL), created in 1999, under the direction of the Waste Management Division of the U.S. Department of Energy (DOE) Albuquerque has been assigned the responsibility to recover and manage excess and unwanted radioactive sealed sources from the public and private sector. LANL intends to ship drums containing qualified sealed sources to the Waste Isolation Pilot Plant (WIPP) for disposal. Prior to shipping, these drums must be characterized with respect to radiological content and other parameters. The U. S. Environmental Protection Agency (EPA) requires that ten radionulcides be quantified and reported for every container of waste to be disposed in the WIPP. The methods traditionally approved by the EPA include non-destructive assay (NDA) in accordance with Appendix A of the Contact-Handled Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant (DOE, 2002) (CH WAC). However, because of the nature and pedigree of historical records for sealed sources and the technical infeasibility of performing NDA on these sources, LANL proposes to characterize the content of these waste drums using qualified existing radiological data in lieu of direct measurement. This plan describes the process and documentation requirements for the use of the peer review process to qualify existing data for sealed radiological sources in lieu of perfonning radioassay. The peer review process will be performed in accordance with criteria provided in 40 CFR (section) 194.22 which specifies the use of the NUREG 1297 guidelines. The plan defines the management approach, resources, schedule, and technical requirements

  6. Seroprevalence of Toxoplasma gondii in mainland and sub-Antarctic New Zealand sea lion (Phocarctos hookeri) populations.

    Science.gov (United States)

    Michael, S A; Howe, L; Chilvers, B L; Morel, Pch; Roe, W D

    2016-09-01

    To investigate the seroprevalence of antibodies to Toxoplasma gondii in New Zealand sea lions (Phocarctos hookeri), as a potential contributor to reproductive failure. Archived sera were sourced from New Zealand sea lions from two recolonising mainland populations in the Otago Peninsula (n=15) and Stewart Island (n=12), as well as a declining population at Enderby Island (n=28) in the New Zealand sub-Antarctic. Sera were tested for antibodies to T. gondii using a commercially available ELISA (with samples considered positive if the sample to positive ratio was >30%), and latex agglutination test (LAT; with titres ≥1:32 considered positive). Western blot analysis was used to validate the results of a subset of 14 samples. Five samples from sea lions in mainland locations were confirmed positive for antibodies to T. gondii. Two adult females exhibited high LAT antibody titres (min 1:2048, max 1:4096) on both occasions when sampled 1 and 2 years apart, respectively. No animals from Enderby Island were seropositive. Toxoplasma gondii infection is unlikely to be a major contributor to poor reproductive success in New Zealand sea lions. However, continued surveillance is pertinent to assess subclinical and clinical impacts of the parasite on these threatened populations. The commercial tests evaluated here, with further species-specific threshold refinement could provide a fast, inexpensive and reliable indicator of T. gondii exposure in New Zealand sea lions.

  7. Secondary seal effects in hydrostatic non-contact seals for reactor coolant pump shaft

    International Nuclear Information System (INIS)

    Fujita, T.; Koga, T.; Tanoue, H.; Hirabayashi, H.

    1987-01-01

    The paper presents a seal flow analysis in a hydrostatic non-contact seal for a PWR coolant pump shaft. A description is given of the non-contact seal for the reactor coolant pump. Results are presented for a distortion analysis of the seal ring, along with the seal flow characteristics and the contact pressure profiles of the secondary seals. The results of the work confirm previously reported findings that the seal ring distortion is sensitive to the o-ring location (which was placed between the ceramic seal face and the seal ring retainer). The paper concludes that the seal flow characteristics and the tracking performance depend upon the dynamic properties of the secondary seal. (U.K.)

  8. Using a cut-paste method to prepare a carbon nanotube fur electrode

    International Nuclear Information System (INIS)

    Zhang, H; Cao, G P; Yang, Y S

    2007-01-01

    We describe and realize an aligned carbon nanotube array based 'carbon nanotube fur (CNTF)' electrode. We removed an 800 μm long aligned carbon nanotube array from the silica substrate, and then pasted the array on a nickel foam current collector to obtain a CNTF electrode. CNTF's characteristics and electrochemical properties were studied systemically in this paper. The cut-paste method is simple, and does not damage the microstructure of the aligned carbon nanotube array. The CNTF electrode obtained a specific capacitance of 14.1 F g -1 and excellent rate capability

  9. A study of Polonium in human hair and in fur from animals

    International Nuclear Information System (INIS)

    Holstein, H; Ranebo, Y.; Henriksson, F.; Rääf, C.L.; Holm, E.; Roos, P.

    2013-01-01

    Human hair and hair from animals might serve as good indicators for internal contamination, allowing for the quantification of general environmental levels of certain radioactive elements. From a sampling, analytical and hygienic point of view it would be advantageous to study hair instead of urine and faeces samples. There have been several investigations concerning Polonium in hair. The purpose of this study was to investigate if hair from humans and fur from animals constitute as matrixes for the estimation of the body burden of 210 Po. Human hair taken from 26 individuals from Sweden was analyzed for its 210 Po content. The resulting activity concentration of 210 Po ranged from 0.5 to 4.8 Bq/kg for individuals between the ages of 3 to 32 years and range from 0.5 to 11.5 Bq/kg for individuals between the ages of 32 to 60. This is in agreement with results presented in other studies. The 210 Po in hair might be due to external contamination or in vivo build up from 210 Pb. To help quantify these sources of contamination a couple of human volunteers ingested known amounts of 209 Po (which does not exist in nature). Results from the study showed that 209 Po was rather rapidly detected in the hair samples Human hair consists of 45% Carbon, 7% Hydrogen, 28% Oxygen, 15% Nitrogen and 5% Sulphur. The central core consists of polypeptide chains with hydrogen and disulphide bindings. It is suggested that the sulphide binding is the reason for transfer of Polonium into the hair. Samples from horses; mane, fur, and tail showed activity concentration levels ranging from 6 to 17 Bq/kg, with no significant differences between the various sample types. Fur samples taken from Muskox from Greenland showed much higher concentrations, i.e. 260 Bq/kg. This was expected since the animal graze over vast surface and consumes large amounts of lichen. Deposited radionuclides accumulate in lichens. Fur samples taken from other animals i.e. moose, hare, wild boar, roe deer, and sheep (lamb

  10. Knife-edge seal for vacuum bagging

    Science.gov (United States)

    Rauschl, J. A.

    1980-01-01

    Cam actuated clamps pinch bagging material between long knife edge (mounted to clamps) and high temperature rubber cushion bonded to baseplate. No adhesive, tape, or sealing groove is needed to seal edge of bagging sheet against base plate.

  11. HMSRP Hawaiian Monk Seal Crittercam video

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project investigates foraging behavior of Hawaiian monk seals by conducting telemetry studies. During these studies, live seals are instrumented with dive...

  12. Film riding seals for rotary machines

    Science.gov (United States)

    Bidkar, Rahul Anil; Sarawate, Neelesh Nandkumar; Wolfe, Christopher Edward; Ruggiero, Eric John; Raj Mohan, Vivek Raja

    2017-03-07

    A seal assembly for a rotary machine is provided. The seal assembly includes multiple sealing device segments disposed circumferentially intermediate to a stationary housing and a rotor. Each of the segments includes a shoe plate with a forward-shoe section and an aft-shoe section having one or more labyrinth teeth therebetween facing the rotor. The sealing device includes a stator interface element having a groove or slot for allowing disposal of a spline seal for preventing segment leakages. The sealing device segment also includes multiple bellow springs or flexures connected to the shoe plate and to the stator interface element. Further, the sealing device segments include a secondary seal integrated with the stator interface element at one end and positioned about the multiple bellow springs or flexures and the shoe plate at the other end.

  13. Legacy HMSRP Hawaiian Monk Seal Ultrasound Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Ultrasound images for measuring the condition of juvenile seals at Laysan Island during 2009-2010, collected when seals were handled as part of the De-Worming Project

  14. HMSRP Hawaiian Monk Seal Telemetry Tag Deployments

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project investigates foraging behavior of Hawaiian monk seals by conducting telemetry studies. During these studies, live seals are instrumented with dive...

  15. Legacy HMSRP Hawaiian Monk Seals Observers

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set documents observers that have collected monk seal data as part of the ongoing monk seal population assessment efforts by PSD personnel and cooperating...

  16. HMSRP Hawaiian Monk Seal Handling Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records for all handling and measurement of Hawaiian monk seals since 1981. Live seals are handled and measured during a variety of events...

  17. Recent advances in magnetic liquid sealing

    International Nuclear Information System (INIS)

    Raj, K.; Stahl, P.; Bottenberg, W.; True, D.; Martis, G.; Zook, C.

    1979-01-01

    In this paper recent work in design and testing of two special magnetic liquid seals extending the state-of-the-art of ferrofluidic sealing is discussed. These custom seals are a moving belt edge seal and an exclusion seal. The first seal provides a hermetic barrier to solid particulates expected to be present in enclosed nuclear environments. The second seal is used on a magnetic disk drive spindle and reduces the particulate contaminants in the memory disk pack area by up to three orders of magnitude. In addition, bearing life in the spindle is found to be doubled due to reduction of operating temperature. The fundamentals of magnetic fluid sealing are presented in terms of magnetic circuit design and physical properties of ferrofluids

  18. HMSRP Hawaiian Monk Seal Argos Location Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This project investigates foraging behavior of Hawaiian monk seals by conducting telemetry studies. During these studies, live seals are instrumented with satellite...

  19. HMSRP Hawaiian Monk Seal Entanglement data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data set contains records of all entanglements of Hawaiian monk seals in marine debris. The data set comprises records of seals entangled by derelict fishing...

  20. Seal Apparatus and Methods to Manufacture Thereof

    Science.gov (United States)

    Richard, James A. (Inventor)

    2013-01-01

    In some implementations, apparatus and methods are provided through which a dynamic cryogenic seal is manufactured. In some implementations, the seal includes a retainer and a spring-seal assembly, the assembly being comprised of a main spring housing and fluorine-containing polymer seals. In some implementations, either a radial seal, or an axial (or "piston seal") is provided. In some implementations, methods of manufacturing the dynamic cryogenic seal are also provided. In some implementations, the methods include assembling the components while either heated or cooled, taking advantage of thermal expansion and contraction, such that there is a strong interference fit between the components at room temperature. In some implementations, this process ensures that the weaker fluorine-containing polymer seal is forced to expand and contract with the stronger retainer and spring and is under constant preload. In some implementations, the fluorine-containing polymer is therefore fluidized and retained, and can not lift off.

  1. Acoustic resonance spectroscopy intrinsic seals

    International Nuclear Information System (INIS)

    Olinger, C.T.; Burr, T.; Vnuk, D.R.

    1994-01-01

    We have begun to quantify the ability of acoustic resonance spectroscopy (ARS) to detect the removal and replacement of the lid of a simulated special nuclear materials drum. Conceptually, the acoustic spectrum of a container establishcs a baseline fingerprint, which we refer to as an intrinsic seal, for the container. Simply removing and replacing the lid changes some of the resonant frequencies because it is impossible to exactly duplicate all of the stress patterns between the lid and container. Preliminary qualitative results suggested that the ARS intrinsic seal could discriminate between cases where a lid has or has not been removed. The present work is directed at quantifying the utility of the ARS intrinsic seal technique, including the technique's sensitivity to ''nuisance'' effects, such as temperature swings, movement of the container, and placement of the transducers. These early quantitative tests support the potential of the ARS intrinsic seal application, but also reveal a possible sensitivity to nuisance effects that could limit environments or conditions under which the technique is effective

  2. Pre-sealing risk analysis

    International Nuclear Information System (INIS)

    Ensminger, D.A.; Hough, M.E.; Oston, S.G.

    1980-01-01

    This report describes studies of accidents involving high-level radioactive waste before sealing the waste into a repository. The report summarizes work done in this area during Fiscal Year 1978 and supplements previous work. Models of accident probability, severity, and consequences are refined and extended

  3. Dampers for Stationary Labyrinth Seals

    Science.gov (United States)

    El-Aini, Yehia; Mitchell, William; Roberts, Lawrence; Montgomery, Stuart; Davis, Gary

    2011-01-01

    Vibration dampers have been invented that are incorporated as components within the stationary labyrinth seal assembly. These dampers are intended to supplement other vibration-suppressing features of labyrinth seals in order to reduce the incidence of high-cycle-fatigue failures, which have been known to occur in the severe vibratory environments of jet engines and turbopumps in which labyrinth seals are typically used. A vibration damper of this type includes several leaf springs and/or a number of metallic particles (shot) all held in an annular seal cavity by a retaining ring. The leaf springs are made of a spring steel alloy chosen, in conjunction with design parameters, to maintain sufficient preload to ensure effectiveness of damping at desired operating temperatures. The cavity is vented via a small radial gap between the retaining ring and seal housing. The damping mechanism is complex. In the case of leaf springs, the mechanism is mainly friction in the slippage between the seal housing and individual dampers. In the case of a damper that contains shot, the damping mechanism includes contributions from friction between individual particles, friction between particles and cavity walls, and dissipation of kinetic energy of impact. The basic concept of particle/shot vibration dampers has been published previously; what is new here is the use of such dampers to suppress traveling-wave vibrations in labyrinth seals. Damping effectiveness depends on many parameters, including, but not limited to, coefficient of friction, mode shape, and frequency and amplitude of vibrational modes. In tests, preloads of the order of 6 to 15 lb (2.72 to 6.8 kilograms) per spring damper were demonstrated to provide adequate damping levels. Effectiveness of shot damping of vibrations having amplitudes from 20 to 200 times normal terrestrial gravitational acceleration (196 to 1,960 meters per square second) and frequencies up to 12 kHz was demonstrated for shot sizes from 0.032 to

  4. Reactor coolant pump seals: improving their performance

    International Nuclear Information System (INIS)

    Pothier, N.E.; Metcalfe, R.

    1986-06-01

    Large CANDU plants are benefitting from transient-resistant four-year reliable reactor coolant pump seal lifetimes, a direct result of AECL's 20-year comprehensive seal improvement program involving R and D staff, manufacturers, and plant designers and operators. An overview of this program is presented, which covers seal modification design, testing, post-service examination, specialized maintenance and quality control. The relevancy of this technology to Light Water Reactor Coolant Pump Seals is also discussed

  5. Development of simplified rotating plug seal structure

    International Nuclear Information System (INIS)

    Ueta, M.; Ichimiya, M.; Kanaoka, T.; Sekiya, H.; Ueda, S.; Ishibashi, S.

    1991-01-01

    We studied a compact and simplified rotating plug seal structure and conducted experiments for key elements of the concept such us the mechanical seal structure and sodium deposit prevention system. Good characteristics were confirmed for the mechanical seal structure, which utilizes an elastomer seal and thin lathe bearing. Applicability of the density barrier concept was also confirmed as the sodium deposit prevention system. This concept can be applied to actual plants. (author)

  6. Hindering the illegal trade in dog and cat furs through a DNA-based protocol for species identification

    Directory of Open Access Journals (Sweden)

    Luisa Garofalo

    2018-06-01

    Full Text Available In Western countries dogs and cats are the most popular pets, and people are increasingly opposed to their rearing for the fur industry. In 2007, a Regulation of the European Union (EU banned the use and trade of dog and cat furs, but an official analytical protocol to identify them as source species was not provided, and violations of law are still frequent in all Member States. In this paper we report on the development and validation of a simple and affordable DNA method for species detection in furs to use as an effective tool to combat illegal trade in fur products. A set of mitochondrial primers was designed for amplification of partial cytochrome b, control region and ND1 gene in highly degraded samples, like furs and pelts. Our amplification workflow involved the use of a non-specific primer pair to perform a first test to identify the species through sequencing, then the application of species-specific primer pairs to use in singleplex end-point PCRs as confirmation tests. The advantage of this two-step procedure is twofold: on the one hand it minimises the possibility of negative test results from degraded samples, since failure of amplification with a first set of primers can be offset by successful amplification of the second, and on the other it adds confidence and reliability to final authentication of species. All designed primers were validated on a reference collection of tissue samples, obtaining solid results in terms of specificity, sensitivity, repeatability and reproducibility. Application of the protocol on real caseworks from seized furs yielded successful results also from old and dyed furs, suggesting that age and chemical staining do not necessarily affect positive amplifications. Major pros of this approach are: (1 sensitive and informative primer sets for detection of species; (2 short PCR amplicons for the analysis of poor quality DNA; (3 binding primers that avoid contamination from human DNA; (4 user

  7. Piston rod seal for a Stirling engine

    Science.gov (United States)

    Shapiro, Wilbur

    1984-01-01

    In a piston rod seal for a Stirling engine, a hydrostatic bearing and differential pressure regulating valve are utilized to provide for a low pressure differential across a rubbing seal between the hydrogen and oil so as to reduce wear on the seal.

  8. 19 CFR 113.25 - Seals.

    Science.gov (United States)

    2010-04-01

    ... signatures of principal and surety, if individuals, and the corporate seal shall be affixed close to the... law of the state in which executed. However, when the charter or governing statute of a corporation requires its acts to be evidenced by its corporate seal, such seal is required. ...

  9. Ergonomics and safety of manual bag sealing.

    NARCIS (Netherlands)

    Groot, M.D. de; Bosch, T.; Eikhout, S.M.; Vink, P.

    2005-01-01

    A variety of seals is used to close bags. Each seal has advantages and disadvantages. For shop assistants sealing bags could be a repetitive physically demanding action. Opening and closing the bags again can cause some discomfort or annoyance for consumers. Besides, it is an activity which can

  10. Improved sealing for in-core systems

    International Nuclear Information System (INIS)

    Dunford, S.

    1989-01-01

    The in-core instrumentation sealing nozzles designed by Framatome have three mechanical seals in series instead of the one traditional seal, and are pressurized by simply tightening up the nozzle covers. They have been installed from the start on all Framatome PWRs, as well as having been backfitted on Belgium and Yugoslavian units and chosen for the Chinese Qinshan plant. (author)

  11. A redescription of Lithornis vulturinus (Aves, Palaeognathae) from the Early Eocene Fur Formation of Denmark.

    Science.gov (United States)

    Bourdon, Estelle; Lindow, Bent

    2015-10-20

    The extinct Lithornithidae include several genera and species of flying palaeognathous birds of controversial affinities known from the Early Paleogene of North America and Europe. An almost complete, articulated skeleton from the Early Eocene marine deposits of the Fur Formation (Denmark) was recently assigned to Lithornis vulturinus Owen, 1840. This study provides a detailed redescription and comparison of this three-dimensionally preserved specimen (MGUH 26770), which is one of the best preserved representatives of the Lithornithidae yet known. We suggest that some new features might be diagnostic of Lithornis vulturinus, including a pterygoid fossa shallower than in other species of Lithornis and the presence of a small caudal process on the os palatinum. We propose that Lithornis nasi (Harrison, 1984) is a junior synonym of Lithornis vulturinus and we interpret minor differences in size and shape among the specimens as intraspecific variation. To date, Lithornis vulturinus is known with certainty from the latest Paleocene-earliest Eocene to Early Eocene of the North Sea Basin (Ølst, Fur and London Clay Formations). Among the four species of the genus Lithornis, the possibility that Lithornis plebius Houde, 1988 (Early Eocene of Wyoming) is conspecific with either Lithornis vulturinus or Lithornis promiscuus Houde, 1988 (Early Eocene of Wyoming) is discussed. The presence of closely related species of Lithornis on either side of the North Atlantic in the Early Eocene reflects the existence of a high-latitude land connection between Europe and North America at that time.

  12. Comments to the German society's for radiation protection (Gesellschaft fur Strahlenschutz) proposed principles for radiation protection

    International Nuclear Information System (INIS)

    Persson, L.

    2002-01-01

    The German Society for Radiation Protection (in German Gesellschaft fur Strahlenschutz) is a separate society for radiation protection in Germany in addition to the leading society named Association of German and Swiss Radiation Protection Specialists (in German Fachverband fur Strahlenschutz). The Society is an international professional society. There are several hundreds members of the German Society for Radiation Protection. The German Society for Radiation Protection is not a member of IRPA (the International Radiation Protection Society). The IRPA member is the Association of German and Swiss Radiation Protection Specialists. According to information given on the web site of the Society for Radiation Protection (www.gfstrahlenschutz.de) the Society was founded in 1990 because in the opinion of the founding members the older professional societies and associations have not adequately considered and implemented the present knowledge of radiation risks and radiation protection. In accordance with its statutes the society pursues besides other aims the best possible protection of humans and the environment from the detrimental action of ionising and non-ionising radiation. The dealing with ionising and non-ionising radiation can according to the Society only be justified on the basis of biological and medical state of the art knowledge

  13. Comparative study on two different seal surface structure for reactor pressure vessel sealing behavior

    International Nuclear Information System (INIS)

    Chen Jun; Xiong Guangming; Deng Xiaoyun

    2014-01-01

    The seal surface structure is very important to reactor pressure vessel (RPV) sealing behavior. In this paper, two 3-D RPV sealing analysis finite models have been established with different seal surface structures, in order to study the influence of two structures. The separation of RPV upper and lower flanges, bolt loads and etc. are obtained, which are used to evaluate the sealing behavior of the RPV. Meanwhile, the comparative analysis of safety margin of two seal surface structural had been done, which provides the theoretical basis for RPV seal structure design optimization. (authors)

  14. Sealing performance of a magnetic fluid seal for rotary blood pumps.

    Science.gov (United States)

    Mitamura, Yoshinori; Takahashi, Sayaka; Kano, Kentaro; Okamoto, Eiji; Murabayashi, Shun; Nishimura, Ikuya; Higuchi, Taka-Aki

    2009-09-01

    A magnetic fluid (MF) for a rotary blood pump seal enables mechanical contact-free rotation of the shaft and, hence, has excellent durability. The performance of a MF seal, however, has been reported to decrease in liquids. We have developed a MF seal that has a "shield" mechanism and a new MF with a higher magnetization of 47.9 kA/m. The sealing performance of the MF seal installed in a rotary blood pump was studied. Under the condition of continuous flow, the MF seal remained in perfect condition against a pressure of 298 mm Hg (pump flow rate: 3.96 L/min). The seal was also perfect against a pressure of 170 mm Hg in a continuous flow of 3.9 L/min for 275 days. We have developed a MF seal that works in liquid against clinically used pressures. The MF seal is promising as a shaft seal for rotary blood pumps.

  15. Air-sea interaction regimes in the sub-Antarctic Southern Ocean and Antarctic marginal ice zone revealed by icebreaker measurements

    Science.gov (United States)

    Yu, Lisan; Jin, Xiangze; Schulz, Eric W.; Josey, Simon A.

    2017-08-01

    This study analyzed shipboard air-sea measurements acquired by the icebreaker Aurora Australis during its off-winter operation in December 2010 to May 2012. Mean conditions over 7 months (October-April) were compiled from a total of 22 ship tracks. The icebreaker traversed the water between Hobart, Tasmania, and the Antarctic continent, providing valuable in situ insight into two dynamically important, yet poorly sampled, regimes: the sub-Antarctic Southern Ocean and the Antarctic marginal ice zone (MIZ) in the Indian Ocean sector. The transition from the open water to the ice-covered surface creates sharp changes in albedo, surface roughness, and air temperature, leading to consequential effects on air-sea variables and fluxes. Major effort was made to estimate the air-sea fluxes in the MIZ using the bulk flux algorithms that are tuned specifically for the sea-ice effects, while computing the fluxes over the sub-Antarctic section using the COARE3.0 algorithm. The study evidenced strong sea-ice modulations on winds, with the southerly airflow showing deceleration (convergence) in the MIZ and acceleration (divergence) when moving away from the MIZ. Marked seasonal variations in heat exchanges between the atmosphere and the ice margin were noted. The monotonic increase in turbulent latent and sensible heat fluxes after summer turned the MIZ quickly into a heat loss regime, while at the same time the sub-Antarctic surface water continued to receive heat from the atmosphere. The drastic increase in turbulent heat loss in the MIZ contrasted sharply to the nonsignificant and seasonally invariant turbulent heat loss over the sub-Antarctic open water.Plain Language SummaryThe icebreaker Aurora Australis is a research and supply vessel that is regularly chartered by the Australian Antarctic Division during the southern summer to operate in waters between Hobart, Tasmania, and Antarctica. The vessel serves as the main lifeline to three permanent research stations on the

  16. Turbine Seal Research at NASA GRC

    Science.gov (United States)

    Proctor, Margaret P.; Steinetz, Bruce M.; Delgado, Irebert R.; Hendricks, Robert C.

    2011-01-01

    Low-leakage, long-life turbomachinery seals are important to both Space and Aeronautics Missions. (1) Increased payload capability (2) Decreased specific fuel consumption and emissions (3) Decreased direct operating costs. NASA GRC has a history of significant accomplishments and collaboration with industry and academia in seals research. NASA's unique, state-of-the-art High Temperature, High Speed Turbine Seal Test Facility is an asset to the U.S. Engine / Seal Community. Current focus is on developing experimentally validated compliant, non-contacting, high temperature seal designs, analysis, and design methodologies to enable commercialization.

  17. Egg masses of the Patagonian squid Doryteuthis (Amerigo gahi attached to giant kelp (Macrocystis pyrifera in the sub-Antarctic ecoregion

    Directory of Open Access Journals (Sweden)

    Sebastián Rosenfeld

    2014-11-01

    Full Text Available Egg masses of the Patagonian squid Doryteuthis (Amerigo gahi attached to giant kelp (Macrocystis pyrifera in the Magellanic channels of the sub-Antarctic ecoregion in southern South America is documented for the first time. Of seven egg masses observed between 2008 and 2011, one was taken to the laboratory to be analysed and photographed. Comprising long transparent capsules containing eggs, the masses were strongly attached to the stipes of M. pyrifera. This macroalgae is a potentially important economic resource due to its multiple industrial uses; this study shows that it also serves an important ecological role as a spawning substrate for D. gahi.

  18. Characterization of MHC class I and II genes in a subantarctic seabird, the blue petrel, Halobaena caerulea (Procellariiformes).

    Science.gov (United States)

    Strandh, Maria; Lannefors, Mimi; Bonadonna, Francesco; Westerdahl, Helena

    2011-10-01

    The great polymorphism observed in the major histocompatibility complex (MHC) genes is thought to be maintained by pathogen-mediated selection possibly combined with MHC-disassortative mating, guided by MHC-determined olfactory cues. Here, we partly characterize the MHC class I and II B of the blue petrel, Halobaena caerulea (Procellariiformes), a bird with significant olfactory abilities that lives under presumably low pathogen burdens in Subantarctica. Blue petrels are long-lived, monogamous birds which suggest the necessity of an accurate mate choice process. The species is ancestral to songbirds (Passeriformes; many MHC loci), although not to gamefowls (Galliformes; few MHC loci). Considering the phylogenetic relationships and the low subantarctic pathogen burden, we expected few rather than many MHC loci in the blue petrel. However, when we analysed partial MHC class I and class II B cDNA and gDNA sequences we found evidence for as many as at least eight MHC class I loci and at least two class II B loci. These class I and II B sequences showed classical MHC characteristics, e.g. high nucleotide diversity, especially in putative peptide-binding regions where signatures of positive selection was detected. Trans-species polymorphism was found between MHC class II B sequences of the blue petrel and those of thin-billed prion, Pachyptila belcheri, two species that diverged ∼25 MYA. The observed MHC allele richness in the blue petrel may well serve as a basis for mate choice, especially since olfactory discrimination of MHC types may be possible in this species.

  19. Dispersal in the sub-Antarctic: king penguins show remarkably little population genetic differentiation across their range.

    Science.gov (United States)

    Clucas, Gemma V; Younger, Jane L; Kao, Damian; Rogers, Alex D; Handley, Jonathan; Miller, Gary D; Jouventin, Pierre; Nolan, Paul; Gharbi, Karim; Miller, Karen J; Hart, Tom

    2016-10-13

    Seabirds are important components of marine ecosystems, both as predators and as indicators of ecological change, being conspicuous and sensitive to changes in prey abundance. To determine whether fluctuations in population sizes are localised or indicative of large-scale ecosystem change, we must first understand population structure and dispersal. King penguins are long-lived seabirds that occupy a niche across the sub-Antarctic zone close to the Polar Front. Colonies have very different histories of exploitation, population recovery, and expansion. We investigated the genetic population structure and patterns of colonisation of king penguins across their current range using a dataset of 5154 unlinked, high-coverage single nucleotide polymorphisms generated via restriction site associated DNA sequencing (RADSeq). Despite breeding at a small number of discrete, geographically separate sites, we find only very slight genetic differentiation among colonies separated by thousands of kilometers of open-ocean, suggesting migration among islands and archipelagos may be common. Our results show that the South Georgia population is slightly differentiated from all other colonies and suggest that the recently founded Falkland Island colony is likely to have been established by migrants from the distant Crozet Islands rather than nearby colonies on South Georgia, possibly as a result of density-dependent processes. The observed subtle differentiation among king penguin colonies must be considered in future conservation planning and monitoring of the species, and demographic models that attempt to forecast extinction risk in response to large-scale climate change must take into account migration. It is possible that migration could buffer king penguins against some of the impacts of climate change where colonies appear panmictic, although it is unlikely to protect them completely given the widespread physical changes projected for their Southern Ocean foraging grounds

  20. Aspects of reproductive ecology and benthic-pelagic coupling in the sub-antarctic sea cucumber Pseudostichopus mollis (Theel)

    Science.gov (United States)

    Morgan, Andrew; Neal, Lance

    2012-07-01

    For deeper regions of the continental shelf environmental cues entraining reproduction in echinoderms are often absent, which contributes to adoption of continuous reproduction, having larger eggs, and a lecithotrophic mode of larval development. In the present study the sub-Antarctic sea cucumber Pseudostichopus mollis from the family Synallactidae was obtained during June (winter) and September (spring) from a depth of approximately 300 m north of the Auckland Islands in an area abundant in biogenic sediments. Samples were processed for body indices and gonad development. Features characteristic of non-continuous reproduction were exhibited. Although a larger egg size was found (212±14 μm), two distinct winter cohorts of oocytes occurred (41-81 and 161-201 μm) and body wall weight fluctuations (7.6% increase in males and 27.5% reduction in females) coincided with changes in gonad indices between sample dates. For males gonad as a proportion of body wall weight decreased from 3.31±0.9 to 2.11±0.37% and for females it increased from 1.59±0.28 to 2.5±0.30%. For both sample dates the gonad of males maintained mature spermatozoa whereas female gonad shifted from mainly recovery and growth of oocytes to growth and advanced growth of mature oocytes. In habitats with low or variable food availability intermittent reproduction is predicted as resources are too low for a high reproductive effort and too erratic for synchrony. A pattern of reproduction where fluctuations in seasonal organic input into an accumulated benthic food source initiates and synchronises gametogenesis for future spawning is proposed.

  1. Habitat associations and distribution of the hyperbenthic shrimp, Nauticaris marionis, around the sub-Antarctic Prince Edward Islands

    Science.gov (United States)

    Haley, Craig; von der Meden, Charles; Atkinson, Lara; Reed, Cecile

    2017-09-01

    The association of organisms with particular habitats and habitat-forming organisms, can strongly influence species distributions, interactions and wider ecosystem services. At the sub-Antarctic Prince Edward Islands, the caridean shrimp Nauticaris marionis is a principal part of the benthic ecosystem, occurring between ca. 50 m and 600 m. Its role as a trophic link between the primary productivity and higher predators is established, but little is understood of its in situ habitat usage and associations or of how these structure patterns of abundance. We investigated these aspects directly using a benthic camera sled, sampling 27 stations between 50 m and 500 m. Substratum type was characterised, and estimates of percentage cover of the 13 main groups of habitat-forming epibenthic taxa were made, alongside absolute counts of N. marionis within 'digital quadrats' drawn from 300 m transects. The distribution of N. marionis was influenced by depth, substratum type and overall biogenic cover, being limited to habitats between 50 and 160 m depth on mud or gravel substrata only, and having > 50% biogenic cover. The presence/absence of N. marionis related to significantly different epibenthic assemblages (termed biogenic habitats), but this effect was contingent on depth. Likewise, densities of N. marionis were significantly affected by biogenic habitat type, identifying an association with two biogenic habitat groups, one dominated by red-algae, the other by structurally complex bryozoan species. These associations likely relate to the structural complexity of the two habitat groups, rather than the specific taxa involved. The apparent absence of N. marionis at depths > 160 m contrasts with earlier records and poses questions about the trophic importance of the shrimp in deeper habitats.

  2. Satellite tagging and biopsy sampling of killer whales at subantarctic Marion Island: effectiveness, immediate reactions and long-term responses.

    Directory of Open Access Journals (Sweden)

    Ryan R Reisinger

    Full Text Available Remote tissue biopsy sampling and satellite tagging are becoming widely used in large marine vertebrate studies because they allow the collection of a diverse suite of otherwise difficult-to-obtain data which are critical in understanding the ecology of these species and to their conservation and management. Researchers must carefully consider their methods not only from an animal welfare perspective, but also to ensure the scientific rigour and validity of their results. We report methods for shore-based, remote biopsy sampling and satellite tagging of killer whales Orcinus orca at Subantarctic Marion Island. The performance of these methods is critically assessed using 1 the attachment duration of low-impact minimally percutaneous satellite tags; 2 the immediate behavioural reactions of animals to biopsy sampling and satellite tagging; 3 the effect of researcher experience on biopsy sampling and satellite tagging; and 4 the mid- (1 month and long- (24 month term behavioural consequences. To study mid- and long-term behavioural changes we used multievent capture-recapture models that accommodate imperfect detection and individual heterogeneity. We made 72 biopsy sampling attempts (resulting in 32 tissue samples and 37 satellite tagging attempts (deploying 19 tags. Biopsy sampling success rates were low (43%, but tagging rates were high with improved tag designs (86%. The improved tags remained attached for 26±14 days (mean ± SD. Individuals most often showed no reaction when attempts missed (66% and a slight reaction-defined as a slight flinch, slight shake, short acceleration, or immediate dive-when hit (54%. Severe immediate reactions were never observed. Hit or miss and age-sex class were important predictors of the reaction, but the method (tag or biopsy was unimportant. Multievent trap-dependence modelling revealed considerable variation in individual sighting patterns; however, there were no significant mid- or long-term changes

  3. Double angle seal forming lubricant film

    Science.gov (United States)

    Ernst, William D.

    1984-01-01

    A lubricated piston rod seal which inhibits gas leaking from a high pressure chamber on one side of the seal to a low pressure chamber on the other side of the seal. A liquid is supplied to the surface of the piston rod on the low pressure side of the seal. This liquid acts as lubricant for the seal and provides cooling for the rod. The seal, which can be a plastic, elastomer or other material with low elastic modulus, is designed to positively pump lubricant through the piston rod/seal interface in both directions when the piston rod is reciprocating. The capacity of the seal to pump lubricant from the low pressure side to the high pressure side is less than its capacity to pump lubricant from the high pressure side to the low pressure side which ensures that there is zero net flow of lubricant to the high pressure side of the seal. The film of lubricant between the seal and the rod minimizes any sliding contact and prevents the leakage of gas. Under static conditions gas leakage is prevented by direct contact between the seal and the rod.

  4. Air riding seal with purge cavity

    Science.gov (United States)

    Sexton, Thomas D; Mills, Jacob A

    2017-08-15

    An air riding seal for a turbine in a gas turbine engine, where an annular piston is axial moveable within an annular piston chamber formed in a stator of the turbine and forms a seal with a surface on the rotor using pressurized air that forms a cushion in a pocket of the annular piston. A purge cavity is formed on the annular piston and is connected to a purge hole that extends through the annular piston to a lower pressure region around the annular piston or through the rotor to an opposite side. The annular piston is sealed also with inner and outer seals that can be a labyrinth seal to form an additional seal than the cushion of air in the pocket to prevent the face of the air riding seal from overheating.

  5. Insecurity of imperfect quantum bit seal

    International Nuclear Information System (INIS)

    Chau, H.F.

    2006-01-01

    Quantum bit seal is a way to encode a classical bit quantum mechanically so that everyone can obtain non-zero information on the value of the bit. Moreover, such an attempt should have a high chance of being detected by an authorized verifier. Surely, a reader looks for a way to get the maximum amount of information on the sealed bit and at the same time to minimize her chance of being caught. And a verifier picks a sealing scheme that maximizes his chance of detecting any measurement of the sealed bit. Here, I report a strategy that passes all measurement detection procedures at least half of the time for all quantum bit sealing schemes. This strategy also minimizes a reader's chance of being caught under a certain scheme. In this way, I extend the result of Bechmann-Pasquinucci et al. by proving that quantum seal is insecure in the case of imperfect sealed bit recovery

  6. Development of the seal for nuclear material

    International Nuclear Information System (INIS)

    Lu Feng; Lu Zhao; Zhao Yonggang; Zhang Qixin; Xiao Xuefu

    2000-01-01

    Two kinds of double cap metallic seal and an adhesive seal are developed for the purpose of the accounting for and control of nuclear material. Two kinds of double cap metallic seal are made of stainless steel and copper, respectively and the self-locked technique is used. The number and the random pattern are carved out side and in side of a cap, respectively, for the seal. The random pattern carved inside of a cap for seal is taken a picture using numeral camera and memorized in computer. Special software is developed for verification of the random pattern memorized in computer. The adhesive seal is made of special adhesive paper for purpose of security, and a special pattern guarded against falsification is printed on seal paper using ultraviolet fluorescent light technique

  7. Core disruptive accident margin seal

    International Nuclear Information System (INIS)

    Garin, J.; Belsick, J.C.

    1978-01-01

    Disclosed is an apparatus for sealing the annulus defined between a substantially cylindrical rotatable first riser assembly and plug combination disposed in a substantially cylindrical second riser assembly and plug combination of a nuclear reactor system. The apparatus comprises a flexible member disposed between the first and second riser components and attached to a metal member which is attached to an actuating mechanism. When the actuating mechanism is not actuated, the flexible member does not contact the riser components thus allowing the free rotation of the riser components. When desired, the actuating mechanism causes the flexible member to contact the first and second riser components in a manner to block the annulus defined between the riser components, thereby sealing the annulus between the riser components

  8. Transport of multiassembly sealed canisters

    International Nuclear Information System (INIS)

    Quinn, R.D.; Lehnert, R.A.; Rosa, J.M.

    1992-01-01

    A significant portion of the commercial spent nuclear fuel in dry storage in the US will be stored in multiassembly sealed canisters before the DOE begins accepting fuel from utilities in 1998. This paper reports that it is desirable from economic and ALARA perspectives to transfer these canisters directly from the plant to the MRS. To this end, it is necessary that the multiassembly sealed canisters, which have been licensed for storage under 10CFR72, be qualified for shipment within a suitable shipping cask under the rules of 10CFR71. Preliminary work performed to date indicates that it is feasible to license a current canister design for transportation, and work is proceeding on obtaining NRC approval

  9. The Quality of Rambak Cracker from Rabbit Skin (Water Content and Swelling Power using The Different Technique of Fur Picking

    Directory of Open Access Journals (Sweden)

    Dedes Amertaningtyas

    2014-11-01

    Full Text Available This objective of this researchwas to compare the different technique of fur picking (liming and boiling inthe quality rambak cracker from rabbit skin on water content and swelling power.Materials of this research were 20 drying rabbit skin 5 – 6 months old. The tTest was using to compare the different technique of fur picking. Theindependent variables of this research were water content and swelling power onrambak cracker from rabbit skin. The result showed that the different techniqueof fur picking had highly significant effect (P<0.01 on water content and  expanding rate. The best result was limingtechnique of fur picking. It had the following properties: Water content of 1.5922% and expending rate of 855.3798 %. The conclusion showed that the use limingof 4% produced high quality of rambak cracker from rabbit skin or anotheranimal skin (cow, buffalo, chicken or fish. Keywords: rambak cracker, rabbit skin, water content,expanding rate

  10. Hermetically sealed superconducting magnet motor

    Science.gov (United States)

    DeVault, Robert C.; McConnell, Benjamin W.; Phillips, Benjamin A.

    1996-01-01

    A hermetically sealed superconducting magnet motor includes a rotor separated from a stator by either a radial gap, an axial gap, or a combined axial and radial gap. Dual conically shaped stators are used in one embodiment to levitate a disc-shaped rotor made of superconducting material within a conduit for moving cryogenic fluid. As the rotor is caused to rotate when the field stator is energized, the fluid is pumped through the conduit.

  11. Fabrication of sealed radiation sources

    International Nuclear Information System (INIS)

    Mars, Jean.

    1977-01-01

    The description is given for fabricating a sealed radiation source, consisting in depositing on a metal substrate a thin active coat of a radioelement, termed first coat, submitting this coated substrate to an oxidation treatment in order to obtain on the first coat an inactive coat of an oxide of the metal, termed second coat, and depositing a coat of varnish on this second inactive coat [fr

  12. Seals for sealing a pressure vessel such as a nuclear reactor vessel or the like

    International Nuclear Information System (INIS)

    Bruns, H.J.; Huelsermann, K.H.

    1975-01-01

    A description is given of seals for sealing a pressure vessel such as a nuclear reactor vessel, steam boiler vessel, or any other vessel which is desirably sealed against pressure of the type including a housing and a housing closure that present opposed vertical sealing surfaces which define the sides of a channel. The seals of the present invention comprise at least one sealing member disposed in the channel, having at least one stop face, a base portion and two shank portions extending from the base portion to form a groove-like recess. The shank portions are provided with sealing surfaces arranged to mate with the opposed vertical pressure vessel sealing surfaces. A shank-spreading wedge element also disposed in the channel has at least one stop face and is engaged in the groove-like recess with the sealing member and wedge element stop face adjacent to each other

  13. Common fur and mystacial vibrissae parallel sensory pathways: 14C 2-deoxyglucose and WGA-HRP studies in the rat

    International Nuclear Information System (INIS)

    Sharp, F.R.; Gonzalez, M.F.; Morgan, C.W.; Morton, M.T.; Sharp, J.W.

    1988-01-01

    Stimulation of mystacial vibrissae in rows A,B, and C increased (14C) 2-deoxyglucose (2DG) uptake in spinal trigeminal nucleus pars caudalis (Sp5c) mostly in ventral portions of laminae III-IV with less activation of II and V. Stimulation of common fur above the whiskers mainly activated lamina II, with less activation in deeper layers. The patterns of activation were compatible with an inverted head, onion skin Sp5c somatotopy. Wheatgerm Agglutinin-Horseradish Peroxidase (WGA-HRP) injections into common fur between mystacial vibrissae rows A-B and B-C led to anterograde transganglionic labeling only of Sp5c, mainly of lamina II with less label in layer V, and very sparse label in III and IV. WGA-HRP skin injections appear to primarily label small fibers, which along with larger fibers, were metabolically activated during common fur stimulation. Mystacial vibrissae stimulation increased 2DG uptake in ventral ipsilateral spinal trigeminal nuclei pars interpolaris (Sp5i) and oralis (Sp5o) and principal trigeminal sensory nucleus (Pr5). Common fur stimulation above the whiskers slightly increased 2DG uptake in ventral Sp5i, Sp5o, and possibly Pr5. The most dorsal aspect of the ventroposteromedial (VPM) nucleus of thalamus was activated contralateral to whisker stimulation. Stimulation of the common fur dorsal to the whiskers activated a region of dorsal VPM caudal to the VPM region activated during whisker stimulation. This is consistent with previous data showing that ventral whiskers and portions of the face are represented rostrally in VPM, and more dorsal whiskers and dorsal portions of the face are represented progressively more caudally in VPM. Mystacial vibrissae stimulation activated the contralateral primary sensory SI barrelfield cortex and a separate region in the second somatosensory SII cortex

  14. Steam Turbine Flow Path Seals (a Review)

    Science.gov (United States)

    Neuimin, V. M.

    2018-03-01

    Various types of shroud, diaphragm, and end seals preventing idle leak of working steam are installed in the flow paths of steam turbine cylinders for improving their efficiency. Widely known labyrinth seals are most extensively used in the Russian turbine construction industry. The category of labyrinth seals also includes seals with honeycomb inserts. The developers of seals with honeycomb inserts state that the use of such seals makes it possible to achieve certain gain due to smaller leaks of working fluid and more reliable operation of the system under the conditions in which the rotor rotating parts may rub against the stator elements. However, a positive effect can only be achieved if the optimal design parameters of the honeycomb structure are fulfilled with due regard to the specific features of its manufacturing technology and provided that this structure is applied in a goal-seeking manner in the seals of steam and gas turbines and compressors without degrading their vibration stability. Calculated and preliminary assessments made by experts testify that the replacement of conventional labyrinth seals by seals with honeycomb inserts alone, due to which the radial gaps in the shroud seal can be decreased from 1.5 to 0.5 mm, allows the turbine cylinder efficiency to be increased at the initial stage by approximately 1% with the corresponding gain in the turbine set power output. The use of rectangular-cellular seals may result, according to estimates made by their developers, in a further improvement of turbine efficiency by 0.5-1.0%. The labor input required to fabricate such seals is six to eight times smaller than that to fabricate labyrinth seals with honeycomb inserts. Recent years have seen the turbine construction companies of the United States and Germany advertising the use of abradable (sealing) coatings (borrowed from the gas turbine construction technology) in the turbine designs instead of labyrinth seals. The most efficient performance of

  15. Overexpression of FurA in Anabaena sp. PCC 7120 reveals new targets for this regulator involved in photosynthesis, iron uptake and cellular morphology.

    Science.gov (United States)

    González, Andrés; Bes, M Teresa; Barja, François; Peleato, M Luisa; Fillat, María F

    2010-11-01

    Previous genomic analyses of the filamentous nitrogen-fixing cyanobacterium Anabaena sp. PCC 7120 have identified three ferric uptake regulator (Fur) homologs with low sequence identities and probably different functions in the cell. FurA is a constitutive protein that shares the highest homology with Fur from heterotrophic bacteria and appears to be essential for in vitro growth. In this study, we have analysed the effects of FurA overexpression on the Anabaena sp. phenotype and investigated which of the observed alterations were directly operated by FurA. Overexpression of the regulator led to changes in cellular morphology, resulting in shorter filaments with rounded cells of different sizes. The furA-overexpressing strain showed a slower photoautotrophic growth and a marked decrease in the oxygen evolution rate. Overexpression of the regulator also decreased both catalase and superoxide dismutase activities, but did not lead to an increase in the levels of intracellular reactive oxygen species. By combining phenotypic studies, reverse transcription-PCR analyses and electrophoretic mobility shift assays, we identified three novel direct targets of FurA, including genes encoding a siderophore outer membrane transporter (schT), bacterial actins (mreBCD) and the PSII reaction center protein D1 (psbA). The affinity of FurA for these novel targets was markedly affected by the absence of divalent metal ions, confirming previous evidence of a critical role for the metal co-repressor in the function of the regulator in vivo. The results unravel new cellular processes modulated by FurA, supporting its role as a global transcriptional regulator in Anabaena sp. PCC 7120.

  16. Polymorphisms in inflammation genes, tobacco smoke and furred pets and wheeze in children

    DEFF Research Database (Denmark)

    Sorensen, M.; Allermann, L.; Vogel, Ulla Birgitte

    2009-01-01

    Persistent wheeze in childhood is associated with airway inflammation. The present study investigated relationships between polymorphisms in inflammatory genes, exposure to tobacco smoke and furred pets and risk of recurrent wheeze in children. Within a birth cohort of 101,042 children we...... identified 1111 eighteen month old cases with recurrent wheeze and 735 wheeze-free controls among 11942 children recruited in the Copenhagen area. Polymorphisms in IL-4R, IL-8, IL-13, SPINK5, and CD14 were genotyped. Interviews at gestational wks 12 and 30, and at age 6 and 18 months included questions...... on number of episodes with wheeze (18 months), exposure to tobacco smoke and pet-keeping. Recurrent wheeze was defined as at least four episodes of wheeze before the child was 18 months old. There was a statistically significant association between the IL-13 Arg144Gln polymorphism and risk of recurrent...

  17. Design optimization of seal structure for sealing liquid by magnetic fluids

    International Nuclear Information System (INIS)

    Liu Tonggang; Cheng Yusheng; Yang Zhiyi

    2005-01-01

    The durability of the magnetic fluid seal clearly decreases when sealing another liquid because of the interface instability caused by the applied magnetic field and the velocity difference of the two liquids. With an intention to establish a stable interface during sealing liquid, a new magnetic fluid seal was developed in this paper. The parameters of the structure were optimized by a simulation apparatus. And the magnetic fluid seal designed based on the optimum parameters shows good performance and long life for sealing lubricating oil

  18. Nutritional Immunity Triggers the Modulation of Iron Metabolism Genes in the Sub-Antarctic Notothenioid Eleginops maclovinus in Response to Piscirickettsia salmonis

    Directory of Open Access Journals (Sweden)

    Danixa Martínez

    2017-09-01

    Full Text Available Iron deprivation is a nutritional immunity mechanism through which fish can limit the amount of iron available to invading bacteria. The aim of this study was to evaluate the modulation of iron metabolism genes in the liver and brain of sub-Antarctic notothenioid Eleginops maclovinus challenged with Piscirickettsia salmonis. The specimens were inoculated with two P. salmonis strains: LF-89 (ATCC® VR-1361™ and Austral-005 (antibiotic resistant. Hepatic and brain samples were collected at intervals over a period of 35 days. Gene expression (by RT-qPCR of proteins involved in iron storage, transport, and binding were statistically modulated in infected fish when compared with control counterparts. Specifically, the expression profiles of the transferrin and hemopexin genes in the liver, as well as the expression profiles of ferritin-M, ferritin-L, and transferrin in the brain, were similar for both experimental groups. Nevertheless, the remaining genes such as ferritin-H, ceruloplasmin, hepcidin, and haptoglobin presented tissue-specific expression profiles that varied in relation to the injected bacterial strain and sampling time-point. These results suggest that nutritional immunity could be an important immune defense mechanism for E. maclovinus against P. salmonis injection. This study provides relevant information for understanding iron metabolism of a sub-Antarctic notothenioid fish.

  19. Lipids of the Tail Gland, Body and Muzzle Fur of the Red Fox, Vulpes vulpes.

    Science.gov (United States)

    McLean, Stuart; Davies, Noel W; Nichols, David S

    2017-07-01

    The tail gland of the red fox (Vulpes vulpes) secretes lipids containing volatile terpenes used in social communication. We have analysed lipids extracted from fur of the tail gland, body (flanks) and muzzle of foxes. GC-MS showed a novel group of iso-valerate and tiglate monoesters of alkane-1,2-diols (C18:0-22:0). There was also a larger group of Type II diesters in which a second, longer chain, fatty acid (FA) was attached to the free alcohol group. LC-MS showed the full range of diol diesters, mostly C36:0-50:0, with smaller amounts of the corresponding mono-unsaturated tiglate esters. An additional group of diesters with higher MW (C49:0-62:0) containing two long-chain FA was present in the lipids of body and muzzle fur. After saponification and GC-MS, 98 fatty acids were characterized as their methyl esters. Apart from the C5 FA, most were saturated n-, iso-, anteiso- or other methyl-branched FA (C12:0-28:0) whose structures were determined by a combination of their mass spectra and Kovats retention indices. Several FA have not previously been found in nature or in vertebrates. Thirty-four alkane-1,2-diols were found as their TMS derivatives, mostly n-, iso- or anteiso-isomers of C16:0-25:0. The tail gland had the greatest amount of wax esters, from a greater variety of FA and diols, but lacked the esters with two long-chain FA. These findings show that fox skin lipids comprise mono- and di-esters of alkane-1,2-diols, and exhibit enormous complexity due to the diversity of their constituent FA, diols and the many possible isomers of their esters.

  20. Vacuum sealing with a spiral grooved gas dynamic seal

    International Nuclear Information System (INIS)

    Sawada, Tadashi

    1979-01-01

    Gas dynamic seals with rectangular spiral grooves are studied theoretically taking the effects of sidewalls of the grooves and the effects of gas compressibility into account, and slip boundary conditions are employed. The results are compared with the existing experimental data and the validity of the theory is confirmed over a wide pressure range except for the extremely low pressures. Suggestions are made regarding the choice of the geometrical dimensions, i.e., aspect ratio, helix angle, clearance parameter and groove width ratio. (author)

  1. Actively controlled shaft seals for aerospace applications

    Science.gov (United States)

    Salant, Richard F.

    1995-07-01

    This study experimentally investigates an actively controlled mechanical seal for aerospace applications. The seal of interest is a gas seal, which is considerably more compact than previous actively controlled mechanical seals that were developed for industrial use. In a mechanical seal, the radial convergence of the seal interface has a primary effect on the film thickness. Active control of the film thickness is established by controlling the radial convergence of the seal interface with a piezoelectric actuator. An actively controlled mechanical seal was initially designed and evaluated using a mathematical model. Based on these results, a seal was fabricated and tested under laboratory conditions. The seal was tested with both helium and air, at rotational speeds up to 3770 rad/sec, and at sealed pressures as high as 1.48 x 10(exp 6) Pa. The seal was operated with both manual control and with a closed-loop control system that used either the leakage rate or face temperature as the feedback. The output of the controller was the voltage applied to the piezoelectric actuator. The seal operated successfully for both short term tests (less than one hour) and for longer term tests (four hours) with a closed-loop control system. The leakage rates were typically 5-15 slm (standard liters per minute), and the face temperatures were generally maintained below 100C. When leakage rate was used as the feedback signal, the setpoint leakage rate was typically maintained within 1 slm. However, larger deviations occurred during sudden changes in sealed pressure. When face temperature was used as the feedback signal, the setpoint face temperature was generally maintained within 3 C, with larger deviations occurring when the sealed pressure changes suddenly. the experimental results were compared to the predictions from the mathematical model. The model was successful in predicting the trends in leakage rate that occurred as the balance ratio and sealed pressure changed

  2. Guide to optimized replacement of equipment seals

    International Nuclear Information System (INIS)

    Gleason, J.F.

    1990-03-01

    A reevaluation of current scheduled replacement intervals of polymeric seals in plant equipment can achieve significant benefits. Information is provided which has the potential for increasing replacement intervals based on better information on how seals have performed through unique nuclear industry tests to qualify equipment, improved elastomers and increased knowledge of the failure mechanisms and related performance. The research was performed by reviewing applications of elastomeric seals in nuclear plants and practice associated with defining seal replacement intervals in the nuclear power and other industries. Performance indicators and how they predict degradation of seals were evaluated. Guidelines and a flow chart for reevaluating seal replacement intervals are provided. 29 refs., 38 figs., 8 tabs

  3. Seal analysis technology for reactor pressure vessel

    International Nuclear Information System (INIS)

    Zheng Liangang; Zhang Liping; Yang Yu; Zang Fenggang

    2009-01-01

    There is the coolant with radiation, high temperature and high pressure in the reactor pressure vessel (RPV). It is closely correlated to RPV sealing capability whether the whole nuclear system work well or not. The aim of this paper is to study the seal analysis method and technology, such as the pre-tensioning of the bolt, elastoplastic contact and coupled technology of thermal and structure. The 3 D elastoplastic seal analysis method really and generally consider the loads and model the contact problem with friction between the contact plates. This method is easier than the specialized seal program and used widely. And it is more really than the 2 D seal analysis method. This 3 D elastoplastic seal analysis method has been successfully used in the design and analysis of RPV. (authors)

  4. Folded membrane dialyzer with mechanically sealed edges

    Energy Technology Data Exchange (ETDEWEB)

    Markley, F.W.

    A semipermeable membrane is folded in accordion fashion to form a stack of pleats and the edges are sealed so as to isolate the opposite surfaces of the membrane. The stack is contained within a case that provides ports for flow of blood in contact with one surface of the membrane through channels formed by the pleats and also provides ports for flow of a dialysate through channels formed by the pleats in contact with the other surface of the membrane. The serpentine side edges of the membrane are sealed by a solidified plastic material, whereas effective mechanical means are provided to seal the end edges of the folded membrane. The mechanical means include a clamping strip which biases case sealing flanges into a sealed relationship with end portions of the membrane near the end edges, which portions extend from the stack and between the sealing flanges.

  5. Management of disused sealed sources

    International Nuclear Information System (INIS)

    Lukauskas, D.; Skridaila, N.

    2003-01-01

    The report presents the requirements on management of disused sealed sources in Lithuania; disused sealed source disposal facilities; performed safety analysis and planed repository safety improvements. The requirements on pre-disposal management of Disused Sealed Sources (DSS) are presented. The requirements on disposal of short lived VLLW and LILW (A, B and C classes) radioactive waste approved in 2002-2003. Generic Waste Acceptance Criteria for Near Surface Disposal, P-2003-01 approved in 2003. Requirements on disposal of Low and intermediate level long lived waste do not exist (D and E classes). Requirements for the disposal of disused sealed sources (F class) do not exist. Disposal method for the F class - Near Surface or Deep geological repository, depending on the waste acceptance criteria. Only one repository for institutional radioactive waste exist in Lithuania - Maisiagala repository. It is near surface RADON type disposal facility, built in 1963 and closed in 1988. It was constructed of the monolithic reinforced concrete with the dimensions 5 m x 15 m x 3 m, the thickness of the sidewalls is about 0.25 m and the thickness of the bottom is about 0.2 m. The overall volume is about 200 m 3 . At time of closure only three fifths of the volume had been filled. The empty two fifths of the vault were filled with concrete, then with sand, then with the concrete (0.01 m), hot bitumen and the 0.05 m asphalt layers. Monolithic concrete that was covered with bitumen and 0.05 m thick layer of asphalt closed the vault. Sand layer the thickness of which was not less than 1.2 m formed the cap. Disused radioactive sources embedded in a biological shielding were buried together with their shielding, the sources without the shielding were buried in two stainless steel containers. The total activity of buried radioactive nuclides is 3.42.10 -15 Bq (calculated according the documentation). There are some uncertainties about the inventory: from 1963 to 1973. After the

  6. Bone-Eating Worms Spread: Insights into Shallow-Water Osedax (Annelida, Siboglinidae from Antarctic, Subantarctic, and Mediterranean Waters.

    Directory of Open Access Journals (Sweden)

    Sergi Taboada

    Full Text Available Osedax, commonly known as bone-eating worms, are unusual marine annelids belonging to Siboglinidae and represent a remarkable example of evolutionary adaptation to a specialized habitat, namely sunken vertebrate bones. Usually, females of these animals live anchored inside bone owing to a ramified root system from an ovisac, and obtain nutrition via symbiosis with Oceanospirillales gamma-proteobacteria. Since their discovery, 26 Osedax operational taxonomic units (OTUs have been reported from a wide bathymetric range in the Pacific, the North Atlantic, and the Southern Ocean. Using experimentally deployed and naturally occurring bones we report here the presence of Osedax deceptionensis at very shallow-waters in Deception Island (type locality; Antarctica and at moderate depths near South Georgia Island (Subantarctic. We present molecular evidence in a new phylogenetic analysis based on five concatenated genes (28S rDNA, Histone H3, 18S rDNA, 16S rDNA, and cytochrome c oxidase I-COI-, using Maximum Likelihood and Bayesian inference, supporting the placement of O. deceptionensis as a separate lineage (Clade VI although its position still remains uncertain. This phylogenetic analysis includes a new unnamed species (O. 'mediterranea' recently discovered in the shallow-water Mediterranean Sea belonging to Osedax Clade I. A timeframe of the diversification of Osedax inferred using a Bayesian framework further suggests that Osedax diverged from other siboglinids during the Middle Cretaceous (ca. 108 Ma and also indicates that the most recent common ancestor of Osedax extant lineages dates to the Late Cretaceous (ca. 74.8 Ma concomitantly with large marine reptiles and teleost fishes. We also provide a phylogenetic framework that assigns newly-sequenced Osedax endosymbionts of O. deceptionensis and O. 'mediterranea' to ribospecies Rs1. Molecular analysis for O. deceptionensis also includes a COI-based haplotype network indicating that individuals from

  7. Sealing method and sealing device for radioactive waste containing vessel

    International Nuclear Information System (INIS)

    Ishiwatari, Koji; Otsuki, Akira

    1998-01-01

    A radioactive waste-containing body is hoisted down into a strong-material vessel opened upwardly, and a strong-material lid is hoisted down to the opening of the strong-material-vessel and welded. The strong material vessel is hoisted up and loaded on a corrosion resistant-material bottom plate placed horizontally. A corrosion resistant-material vessel having one opening end and having a corrosion resistant-material flange on the other end and previously agreed with the strong material-vessel main body is hoisted up by a hoisting device having an inserting device so that the opening of the corrosion resistant vessel is directed downwardly. The corrosion resistant vessel is press-fitted to the outside of the strong material-vessel by the inserting device while being heated by a preheater to shrink. Subsequently, the lower end of the corrosion resistant-material vessel and the corrosion resistant-material bottom plate are welded to constitute a corrosion resistant-material vessel. Then, the radioactive waste containing body can be sealed in a sealing vessel comprising the strong-material vessel and the corrosion resistant-material vessel. (N.H.)

  8. Comment on 'Quantum string seal is insecure'

    International Nuclear Information System (INIS)

    He Guangping

    2007-01-01

    An attack strategy was recently proposed by Chau [Phys. Rev. A 75, 012327 (2007)], which was claimed to be able to break all quantum string seal protocols. Here it will be shown that the attack cannot obtain nontrivial information and escape the detection simultaneously in a class of quantum string seal, including the one proposed by He [Int. J. Quantum Inf. 4, 677 (2006)]. Thus it is insufficient to conclude that all quantum string seals are insecure

  9. A seal analyzer for testing container integrity

    International Nuclear Information System (INIS)

    McDaniel, P.; Jenkins, C.

    1988-01-01

    This paper reports on the development of laboratory and production seal analyzer that offers a rapid, nondestructive method of assuring the seal integrity of virtually any type of single or double sealed container. The system can test a broad range of metal cans, drums and trays, membrane-lidded vessels, flexible pouches, aerosol containers, and glass or metal containers with twist-top lids that are used in the chemical/pesticide (hazardous materials/waste), beverage, food, medical and pharmaceutical industries

  10. Ceramic blade with tip seal

    Science.gov (United States)

    Glezer, B.; Bhardwaj, N.K.; Jones, R.B.

    1997-08-05

    The present gas turbine engine includes a disc assembly defining a disc having a plurality of blades attached thereto. The disc has a preestablished rate of thermal expansion and the plurality of blades have a preestablished rate of thermal expansion being less than the preestablished rate of thermal expansion of the disc. A shroud assembly is attached to the gas turbine engine and is spaced from the plurality of blades a preestablished distance forming an interface there between. Positioned in the interface is a seal having a preestablished rate of thermal expansion being generally equal to the rate of thermal expansion of the plurality of blades. 4 figs.

  11. The Sealed Tube Neutron Generator

    International Nuclear Information System (INIS)

    Tunnell, L.N.; Beyerle, A.; Durkee, R.; Headley, G.; Hurley, P.

    1992-01-01

    A Sealed Tube Neutron Generator (STNG) has been designed and tested at Special Technologies Laboratories (STL) in Santa Barbara, California. Unlike similar tubes that have been used for years in other applications, e.g., by the oil well logging industry, the present device was designed primarily to be part of the Associated Particle Imaging (API) system. Consequently, the size and quality of the neutron spot produced by the STNG is of primary importance. Results from initial measurements indicate that performance goals are satisfied

  12. Upgrading primary heat transport pump seals

    International Nuclear Information System (INIS)

    Graham, T.; Metcalfe, R.; Rhodes, D.; McInnes, D.

    1995-01-01

    Changes in the operating environment at the Bruce-A Nuclear Generating Station created the need for an upgraded Primary Heat Transport Pump (PHTP) seal. In particular, the requirement for low pressure running during more frequent start-ups exposed a weakness of the CAN2 seal and reduced its reliability. The primary concern at Bruce-A was the rotation of the CAN2 No. 2 stators in their holders. The introduction of low pressure running exacerbated this problem, giving rapid wear of the stator back face, overheating, and thermocracking. In addition, the resulting increase in friction between the stator and its holder increased stationary-side hysteresis and thereby changed the seal characteristic to the point where interseal pressure oscillations became prevalent. The resultant increased hysteresis also led to hard rubbing of the seal faces during temperature transients. An upgraded seal was required for improved reliability to avoid forced outages and to reduce maintenance costs. This paper describes this upgraded 'replacement seal' and its performance history. In spite of the 'teething' problems detailed in this paper, there have been no forced outages due to the replacement seal, and in the words of a seal maintenance worker at Bruce-A, 'it allows me to go home and sleep at night instead of worrying about seal failures.' (author)

  13. Seal for an object containing nuclear fuel

    International Nuclear Information System (INIS)

    Scheuerpflug, W.; Nentwich, D.

    1977-01-01

    This seal which cannot be counterfeited, specially for sealing nuclear objects, e.g. fuel rods, not only makes any damage which has taken place obvious, but makes identification according to a key possible. For this purpose a minimum number of 'particles' or small bodies, which are identical but of different permeability, are fixed inside a short tube during 'loading' of the seal in a certain or an accidental sequence. The sequence of the spheres, which represents a key, can only be determined by special electromagnetic measuring equipment. On first opening the seal, this key sequence is irrevocably destroyed. (HP) [de

  14. Quick-sealing design for radiological containment

    International Nuclear Information System (INIS)

    Rampdla, D.S.; Speer, E.

    1991-01-01

    This patent describes a quick-sealing assembly and method for forming an adhesive seal on opposite sides of a mechanical seal for a flexible containment bag of the type used for working with radioactively contaminated objects. The assembly includes an elongated mechanical fastener having opposing engaging members affixed at a predetermined distance from each of the elongated edges, with an adhesive layer formed between the mechanical fastener and the elongated edge such that upon engagement of the mechanical fastener and adhesive layers to opposing containment fabric, a neat triple hermetic seal is formed

  15. Quick-sealing design for radiological containment

    International Nuclear Information System (INIS)

    Rampolia, D.S.; Speer, E.

    1990-01-01

    This patent describes a quick-sealing assembly and method for forming an adhesive seal on opposite sides of a mechanical seal for a flexible containment bag of the type used for working with radioactively contaminated objects. The assembly includes an elongated mechanical fastener having opposing engaging members affixed at a predetermined distance from each of the elongated edges, with an adhesive layer formed between the mechanical fastener and the elongated edge such that upon engagement of the mechanical fastener and adhesive layers to opposing containment fabric, a neat triple hermetic seal is formed

  16. Reusable tamper-indicating security seal

    International Nuclear Information System (INIS)

    Ryan, M.J.

    1981-01-01

    A reusable tamper-indicating mechanical security seal for use in safeguarding nuclear material has been developed. The high-security seal displays an unpredictable, randomly selected, five-digit code each time it is used. This five digit code serves the same purpose that the serial number does for conventional non-reusable seals - a unique identifier for each use or application. The newly developed reusable seal is completely enclosed within a seamless, tamper-indicating, plastic jacket. The jacket is designed to reveal any attempts to penetrate, section or to chemically remove and replace with a counterfeit for surreptitious purposes

  17. Ductile alloys for sealing modular component interfaces

    Science.gov (United States)

    Marra, John J.; Wessell, Brian J.; James, Allister W.; Marsh, Jan H.; Gear, Paul J.

    2017-08-08

    A vane assembly (10) having: an airfoil (12) and a shroud (14) held together without metallurgical bonding there between; a channel (22) disposed circumferentially about the airfoil (12), between the airfoil (12) and the shroud (14); and a seal (20) disposed in the channel (22), wherein during operation of a turbine engine having the vane assembly (10) the seal (20) has a sufficient ductility such that a force generated on the seal (20) resulting from relative movement of the airfoil (12) and the shroud (14) is sufficient to plastically deform the seal (20).

  18. Quick-sealing design for radiological containment

    Science.gov (United States)

    Rampolia, Donald S.; Speer, Elmer

    1990-01-01

    A quick-sealing assembly and method for forming an adhesive seal on opposite sides of a mechanical seal for a flexible containment bag of the type used for working with radioactively contaminated objects. The assembly includes an elongated mechanical fastener having opposing engaging members affixed at a predetermined distance from each of the elongated edges, with an adhesive layer formed between the mechanical fastener and the elongated edge such that upon engagement of the mechanical fastener and adhesive layers to opposing containment fabric, a neat triple hermetic seal is formed.

  19. Properties of Sealing Materials in Groundwater Wells

    DEFF Research Database (Denmark)

    Köser, Claus

    pellets as sealing material in groundwater wells. The way and the pattern, in which bentonite pellets are deposited, have been shown to have an effect on the swelling pressure of the bentonite seal. During the transport phase of pellets from the terrain to a given sedimentation depth, a sorting process......) into densities for clay/water systems has been developed. This method has successfully been used to evaluate e.g., macroporosity, homogenization of the bentonite seal during the hydration of water, hydraulic conductivity and the creation of channels in the bentonite seals. Based on the results obtained...

  20. Bingham Sealing and Application in Vacuum Clamping

    Science.gov (United States)

    Yao, S. M.; Teo, Wee Kin; Geng, Zunmin; Turner, Sam; Ridgway, Keith

    2011-12-01

    Vacuum clamping is extensively used in shell machining. In this paper a Bingham Sealing (BS) is presented and formulized based on Bingham plastic performance. The sealing capability of BS is evaluated in various cases. A new Bingham plastic is developed and the yield stress is measured. The performances of "O"ring sealing and BS with the developed Bingham plastic are compared to the static experiment. In this experiment the same vacuum is achieved and the distortion of the blade with BS is better than that with "O" ring sealing.

  1. Bingham Sealing and Application in Vacuum Clamping

    International Nuclear Information System (INIS)

    Yao, S M; Teo, Wee Kin; Geng Zunmin; Turner, Sam; Ridgway, Keith

    2011-01-01

    Vacuum clamping is extensively used in shell machining. In this paper a Bingham Sealing (BS) is presented and formulized based on Bingham plastic performance. The sealing capability of BS is evaluated in various cases. A new Bingham plastic is developed and the yield stress is measured. The performances of Or ing sealing and BS with the developed Bingham plastic are compared to the static experiment. In this experiment the same vacuum is achieved and the distortion of the blade with BS is better than that with 'O' ring sealing.

  2. Ceramic/metal seals. [refractory materials for hermetic seals for lighium-metal sulfide batteries

    Science.gov (United States)

    Bredbenner, A. M.

    1977-01-01

    Design criteria are discussed for a hermetic seal capable of withstanding the 450 C operating temperature of a lithium-metal sulfide battery system. A mechanical seal consisting of two high strength alloy metal sleeves welded or brazed to a conductor assembly and pressed onto a ceramic is described. The conductor center passes through the ceramic but is not sealed to it. The seal is effected on the outside of the taper where the tubular part is pressed down over and makes contact.

  3. 30 CFR 75.337 - Construction and repair of seals.

    Science.gov (United States)

    2010-07-01

    ... sealed areas. (b) Prior to sealing, the mine operator shall— (1) Remove insulated cables, batteries, and other potential electric ignition sources from the area to be sealed when constructing seals, unless it... after April 18, 2008, the seal at the lowest elevation shall have a corrosion-resistant, non-metallic...

  4. Albinistic common seals (Phoca vitulina) and melanistic grey seals (Halichoerus grypus) rehabilitated in the Netherlands

    NARCIS (Netherlands)

    Osinga, Nynke; 't Hart, Pieter; Vader, Pieter C. van Voorst

    2010-01-01

    The Seal Rehabilitation and Research Centre (SRRC) in Pieterburen, The Netherlands, rehabilitates seals from the waters of the Wadden Sea, North Sea and Southwest Delta area. Incidental observations of albinism and melanism in common and grey seals are known from countries surrounding the North Sea.

  5. Gulf-Wide Information System, Environmental Sensitivity Index Semi-aquatic, Fur-bearing Mammal Database, Geographic NAD83, LDWF (2001) [esi_s_mammal_LDWF_2001

    Data.gov (United States)

    Louisiana Geographic Information Center — This data set contains sensitive biological resource data for small semi-aquatic, fur-bearing mammals in coastal Louisiana. Vector polygons represent areas of...

  6. Flexible ureterorenoscopy (F-URS) with holmium laser versus extracorporeal shock wave lithotripsy (ESWL) for treatment of renal stone <2 cm: a meta-analysis.

    Science.gov (United States)

    Mi, Yuanyuan; Ren, Kewei; Pan, Haiyan; Zhu, Lijie; Wu, Sheng; You, Xiaoming; Shao, Hongbao; Dai, Feng; Peng, Tao; Qin, Feng; Wang, Jian; Huang, Yi

    2016-08-01

    The objective of the study was to systematically review the efficacy and safety of flexible ureterorenoscopy (F-URS) with holmium laser versus extracorporeal shock wave lithotripsy (ESWL) for the treatment of renal stone ESWL (WMD = 2.13, 95 % CI 1.13-4.00, P = 0.02). F-URS is associated with higher SFR, lower APR and RR than ESWL. F-URS is a safe and effective procedure. It can successfully treat patients with stones for 1-2 cm, especially for lower pole stone, without increasing complications, operative time and hospital stay. F-URS can be used as an alternative treatment to ESWL in selected cases with larger renal stones. However, further randomized trials are needed to confirm these findings.

  7. AFSC/NMML/CCEP: Raw telemetry data for California sea lions and northern fur seals in waters off California, Oregon, and Washington during 2002-2007

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The purpose of this project was to obtain data that are pertinent to assessing aspects of the distribution and foraging ecology of pinnipeds inhabiting the...

  8. High thermal expansion, sealing glass

    Science.gov (United States)

    Brow, R.K.; Kovacic, L.

    1993-11-16

    A glass composition is described for hermetically sealing to high thermal expansion materials such as aluminum alloys, stainless steels, copper, and copper/beryllium alloys, which includes between about 10 and about 25 mole percent Na[sub 2]O, between about 10 and about 25 mole percent K[sub 2]O, between about 5 and about 15 mole percent Al[sub 2]O[sub 3], between about 35 and about 50 mole percent P[sub 2]O[sub 5] and between about 5 and about 15 mole percent of one of PbO, BaO, and mixtures thereof. The composition, which may also include between 0 and about 5 mole percent Fe[sub 2]O[sub 3] and between 0 and about 10 mole percent B[sub 2]O[sub 3], has a thermal expansion coefficient in a range of between about 160 and 210[times]10[sup [minus]7]/C and a dissolution rate in a range of between about 2[times]10[sup [minus]7] and 2[times]10[sup [minus]9]g/cm[sup 2]-min. This composition is suitable to hermetically seal to metallic electrical components which will be subjected to humid environments over an extended period of time.

  9. Safeguards sealing systems for Zebra

    International Nuclear Information System (INIS)

    Ingram, G.; Jamieson, G.R.

    1983-01-01

    A relatively simple design has been produced for safeguards seals to be applied throughout the fuel containing areas at Zebra. It is based on the use of wire seals and regular Inspector surveillance. The application of the system would allow an Inspector to establish to a high degree of confidence that significant quantities of fuel had not been diverted during an intensive experimental programme. It would add about 5% to the time required for experiments, and careful planning would reduce this value. The inspection effort required to witness element movements during the experimental programme would average about 2 hours per day, with a further 2 hours spent each week on NDA of the fuel exposed. The Safeguards Inspector would require to spend about 25% of his time in the reactor area and would have ample time to deal with the relatively small number of fuel movements taking place in the storage area and with his duties elsewhere in the plant. During a core change, full-time inspection effort would be required for about 6 weeks each year. (author)

  10. 75 FR 21233 - Incidental Takes of Marine Mammals During Specified Activities; Replacement and Repair of Fur...

    Science.gov (United States)

    2010-04-23

    ... repair and replacement operations all construction debris is being removed. Pressure treated wood will go.... Natural wood is used by the construction contractor for forms for grout pads or temporary bracing if it is... seals unlikely. However, the proposed construction season has been extended to the first week of June in...

  11. A magnetic fluid seal for rotary blood pumps: effects of seal structure on long-term performance in liquid.

    Science.gov (United States)

    Mitamura, Yoshinori; Takahashi, Sayaka; Amari, Shuichi; Okamoto, Eiji; Murabayashi, Shun; Nishimura, Ikuya

    2011-03-01

    A magnetic fluid (MF) seal enables mechanical contact-free rotation of the shaft and hence has excellent durability. The performance of an MF seal, however, has been reported to decrease in liquids. We developed an MF seal that has a "shield" mechanism, and a new MF with a higher magnetization of 47.9 kA/m. The sealing performance of the MF seal installed in a rotary blood pump was studied. Three types of MF seals were used. Seal A was a conventional seal without a shield. Seal B had the same structure as that of Seal A, but the seal was installed at 1 mm below liquid level. Seal C was a seal with a shield and the MF was set at 1 mm below liquid level. Seal A failed after 6 and 11 days. Seal B showed better results (20 and 73 days). Seal C showed long-term durability (217 and 275 days). The reason for different results in different seal structures was considered to be different flow conditions near the magnetic fluid. Fluid dynamics near the MF in the pump were analyzed using computational fluid dynamics (CFD) software. We have developed an MF seal with a shield that works in liquid for >275 days. The MF seal is promising as a shaft seal for rotary blood pumps.

  12. Cover gas seals. 11 - FFTF-LMFBR seal-test program, January-March 1974

    International Nuclear Information System (INIS)

    Kurzeka, W.; Oliva, R.; Welch, F.

    1974-01-01

    The objectives of this program are to: (1) conduct static and dynamic tests to demonstrate or determine the mechanical performance of full-size (cross section) FFTF fuel transfer machine and reactor vessel head seals intended for use in a sodium vapor - inert gas environment, (2) demonstrate that these FFTF seals or new seal configuration provide acceptable fission product and cover gas retention capabilities at LMFBR Clinch River Plant operating environmental conditions other than radiation, and (3) develop improved seals and seal technology for the LMFBR Clinch River Plant to support the national objective to reduce all atmospheric contaminations to low levels

  13. Phocine Distemper in German Seals, 2002

    Science.gov (United States)

    Wohlsein, Peter; Beineke, Andreas; Haas, Ludwig; Greiser-Wilke, Irene; Siebert, Ursula; Fonfara, Sonja; Harder, Timm; Stede, Michael; Gruber, Achim.D.; Baumgärtner, Wolfgang

    2004-01-01

    Approximately 21,700 seals died during a morbillivirus epidemic in northwestern Europe in 2002. Phocine distemper virus 1 was isolated from seals in German waters. The sequence of the P gene showed 97% identity with the Dutch virus isolated in 1988. There was 100% identity with the Dutch isolate from 2002 and a single nucleotide mismatch with the Danish isolate. PMID:15200869

  14. Electron beam selectively seals porous metal filters

    Science.gov (United States)

    Snyder, J. A.; Tulisiak, G.

    1968-01-01

    Electron beam welding selectively seals the outer surfaces of porous metal filters and impedances used in fluid flow systems. The outer surface can be sealed by melting a thin outer layer of the porous material with an electron beam so that the melted material fills all surface pores.

  15. Earlier pupping in harbour seals, Phoca vitulina

    NARCIS (Netherlands)

    Reijnders, P.J.H.; Brasseur, S.M.J.M.; Meesters, H.W.G.

    2010-01-01

    The annual reproductive cycle of most seal species is characterized by a tight synchrony of births. Typically, timing of birth shows little inter-annual variation. Here, however we show that harbour seals Phoca vitulina from the Wadden Sea (southeast North Sea) have shortened their yearly cycle,

  16. Performance evaluation of chip seals in Idaho.

    Science.gov (United States)

    2010-08-01

    The intent of this research project is to identify a wide variety of parameters that influence the performance of pavements treated via chip seals within the State of Idaho. Chip sealing is currently one of the most popular methods of maintenance for...

  17. 39 CFR 2.4 - Seal.

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false Seal. 2.4 Section 2.4 Postal Service UNITED STATES... Secretary of State, and is required by 39 U.S.C. 207 to be judicially noticed. The Seal shall be in the... description of the Postal Service emblem is described at 39 CFR 221.7. ...

  18. Floating seal system for rotary devices

    Science.gov (United States)

    Banasiuk, H.A.

    1983-08-23

    This invention relates to a floating seal system for rotary devices to reduce gas leakage around the rotary device in a duct and across the face of the rotary device to an adjacent duct. The peripheral seal bodies are made of resilient material having a generally U-shaped cross section wherein one of the legs is secured to a support member and the other of the legs forms a contacting seal against the rotary device. The legs of the peripheral seal form an extended angle of intersection of about 10[degree] to about 30[degree] in the unloaded condition to provide even sealing forces around the periphery of the rotary device. The peripheral seal extends around the periphery of the support member except where intersected by radial seals which reduce gas leakage across the face of the rotary device and between adjacent duct portions. The radial seal assembly is fabricated from channel bars, the smaller channel bar being secured to the divider of the support member and a larger inverted rigid floating channel bar having its legs freely movable over the legs of the smaller channel bar forming therewith a tubular channel. A resilient flexible tube is positioned within the tubular channel for substantially its full length to reduce gas leakage across the tubular channel. A spacer extends beyond the face of the floating channel near each end of the floating channel a distance to provide desired clearance between the floating channel and the face of the rotary device. 5 figs.

  19. EXPERIMENTAL STUDY OF MAGNETIC FLUID SEAL

    Directory of Open Access Journals (Sweden)

    V. G. Bashtovoi

    2006-01-01

    Full Text Available Dependences of critical pressure drop, being held by magnetic fluid seal, on time in a static state and shaft rotation velocity in dynamics have been experimentally determined. The significant influence of particles’ redistribution in magnetic fluid on static parameters of magnetic fluid seal has been established.

  20. Molybdenum sealing glass-ceramic composition

    International Nuclear Information System (INIS)

    Eagan, R.J.

    1976-01-01

    A glass-ceramic composition is described having low hydrogen and helium permeability properties, along with high fracture strength, and a thermal coefficient of expansion similar to that of molybdenum. The composition is adaptable for hermetically sealing to molybdenum at temperatures between 900 and about 950 0 C to form a hermetically sealed insulator body

  1. Sealing a Loosely Fitting Valve Assembly

    Science.gov (United States)

    Goff, L.; Tellier, G.

    1986-01-01

    Double-ring seal avoids expense of remachining or redesigning valve parts. Mating fittings on valve sealed by pair of rings - one O-ring and backup ring. Backup ring fills relatively large gap between parts. Prevents softer O-ring from being pushed into and through gap.

  2. 19 CFR 101.7 - Customs seal.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Customs seal. 101.7 Section 101.7 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY GENERAL PROVISIONS § 101.7 Customs seal. (a) Design. According to the design furnished by the Department...

  3. Dura Seal recommendations for nuclear power plants

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    Reactor systems (BWR, PWR and Candu) are briefly reviewed with reference to the pumping services encountered in each system, to indicate the conditions imposed on mechanical seals for nuclear power plant liquid handling equipment. A description of the Dura Seals used in each service is included. (U.K.)

  4. Sealing Occlusal Dentin Caries in Permanent Molars

    DEFF Research Database (Denmark)

    Qvist, Vibeke; Borum, Mette Kit; Møller, Kirsten Dynes

    2017-01-01

    The purpose of this study was to investigate the possibility of postponing restorative intervention of manifest occlusal caries in young, permanent dentition by non-invasive sealing. This RCT-designed study included 521 occlusal lesions in 521 patients aged 6 to 17 y. Based on clinical and radiog......The purpose of this study was to investigate the possibility of postponing restorative intervention of manifest occlusal caries in young, permanent dentition by non-invasive sealing. This RCT-designed study included 521 occlusal lesions in 521 patients aged 6 to 17 y. Based on clinical...... longevity of sealings and restorations until retreatments, and 3) compare effectiveness of sealings and restorations to halt caries progression in sealed lesions and beneath restorations. Furthermore, we aimed to identify factors influencing longevity and the effectiveness of sealings and restorations.......001). The median survival time for sealings not replaced by restorations was 7.3 y (CI, 6.4 y to NA). Survival of sealings was increased in patients with low caries risk and/or excellent oral hygiene, second molars compared with first molars, and lesions not extending the middle one-third of the dentin. Survival...

  5. Analysis of Factors Influencing Fur Quality in Minks of Standard, Pastel, Platinum and White Hedlunda Colour Strains

    OpenAIRE

    Stanisław Socha; Dorota Kołodziejczyk; Ewa Kondraciuk; Danuta Wójcik; Aldona Gontarz

    2010-01-01

    The work aimed at the analysis of the factors that influence conformation traits, included animal size and fur quality traits in four colour types of mink: standard, pastel, platinum and white Hedlunda. The data concerns the evaluation of animal conformation traits in the period of three years. The analysis of variance of particular traits indicates statistically significant effect of the year of birth, colour type and animal sex on the majority of analysed traits. Higher means of license eva...

  6. Effects of a 17q21 chromosome gene variant, tobacco smoke and furred pets on infant wheeze

    DEFF Research Database (Denmark)

    Bräuner, E V; Loft, S; Raaschou-Nielsen, O

    2012-01-01

    investigated associations between the rs7216389 polymorphism in the 17q21 locus affecting ORMDL3 expression and the risk for recurrent wheeze and interactions with exposure to tobacco smoke and furred pets during pregnancy and infancy using a birth cohort of 101¿042 infants. Rs7216389 was significantly...... association between pets and wheeze among homozygous wild-type carriers and a negative association among homozygous variant allele carriers. There was no interaction between rs7216389 and tobacco smoke exposure....

  7. Radiation pasteurization of mink feed: Effect of irradiated feed on reproductive performance, growth and fur quality of mink

    Science.gov (United States)

    Passey, C. A.; Roy, D.; Savoie, L.; Malo, R.; Wilson, J.

    No significant differences were observed in the net birth rate of kits/female between the 7 breeding groups. However, there was reduced incidence (P = 0.05) of kit deaths among the females receiving irradiated feed, and larger kit size (P pasteurization of mink feed (frozen meat to 1 kGy, and dry feed to 2 kGy or more) should therefore help improve feed utilization, keep the animals healthier, and reproducing better without affecting fur quality.

  8. Machine Vision Inspection of Polymeric Traypack Seal Areas

    National Research Council Canada - National Science Library

    Coburn, John

    2002-01-01

    .... Since entrapped matter can lead to open seals, defects, and seal anomalies, a method of measurement for seal area contamination is useful in quantifying effects of filler changes, line speeds, and product formulations...

  9. Sealing of boreholes using natural, compatible materials: Granular salt

    International Nuclear Information System (INIS)

    Finley, R.E.; Zeuch, D.H.; Stormont, J.C.; Daemen, J.J.K.

    1994-01-01

    Granular salt can be used to construct high performance permanent seals in boreholes which penetrate rock salt formations. These seals are described as seal systems comprised of the host rock, the seal material, and the seal rock interface. The performance of these seal systems is defined by the complex interactions between these seal system components through time. The interactions are largely driven by the creep of the host formation applying boundary stress on the seal forcing host rock permeability with time. The immediate permeability of these seals is dependent on the emplaced density. Laboratory test results suggest that careful emplacement techniques could results in immediate seal system permeability on the order of 10 -16 m 2 to 10 -18 m 2 (10 -4 darcy to 10 -6 ). The visco-plastic behavior of the host rock coupled with the granular salts ability to ''heal'' or consolidate make granular salt an ideal sealing material for boreholes whose permanent sealing is required

  10. Active Infrared Thermography for Seal Contamination Detection in Heat-Sealed Food Packaging

    Directory of Open Access Journals (Sweden)

    Karlien D’huys

    2016-11-01

    Full Text Available Packaging protects food products from environmental influences, assuring quality and safety throughout shelf life if properly performed. Packaging quality depends on the quality of the packaging material and of the closure or seal. A common problem possibly jeopardizing seal quality is the presence of seal contamination, which can cause a decreased seal strength, an increased packaging failure risk and leak formation. Therefore, early detection and removal of seal contaminated packages from the production chain is crucial. In this work, a pulsed-type active thermography method using the heated seal bars as an excitation source was studied for detecting seal contamination. Thermal image sequences of contaminated seals were recorded shortly after sealing. The detection performances of six thermal image processing methods, based on a single frame, a fit of the cooling profiles, thermal signal reconstruction, pulsed phase thermography, principal component thermography and a matched filter, were compared. High resolution digital images served as a reference to quantify seal contamination, and processed thermal images were mapped to these references. The lowest detection limit (equivalent diameter 0.60 mm was obtained for the method based on a fit of the cooling profiles. Moreover, the detection performance of this method did not depend strongly on the time after sealing at which recording of the thermal images was started, making it a robust and generally applicable method.

  11. Skin and fur bacterial diversity and community structure on American southwestern bats: effects of habitat, geography and bat traits

    Directory of Open Access Journals (Sweden)

    Ara S. Winter

    2017-10-01

    Full Text Available Microorganisms that reside on and in mammals, such as bats, have the potential to influence their host’s health and to provide defenses against invading pathogens. However, we have little understanding of the skin and fur bacterial microbiota on bats, or factors that influence the structure of these communities. The southwestern United States offers excellent sites for the study of external bat bacterial microbiota due to the diversity of bat species, the variety of abiotic and biotic factors that may govern bat bacterial microbiota communities, and the lack of the newly emergent fungal disease in bats, white-nose syndrome (WNS, in the southwest. To test these variables, we used 16S rRNA gene 454 pyrosequencing from swabs of external skin and fur surfaces from 163 bats from 13 species sampled from southeastern New Mexico to northwestern Arizona. Community similarity patterns, random forest models, and generalized linear mixed-effects models show that factors such as location (e.g., cave-caught versus surface-netted and ecoregion are major contributors to the structure of bacterial communities on bats. Bats caught in caves had a distinct microbial community compared to those that were netted on the surface. Our results provide a first insight into the distribution of skin and fur bat bacteria in the WNS-free environment of New Mexico and Arizona. More importantly, it provides a baseline of bat external microbiota that can be explored for potential natural defenses against pathogens.

  12. Skin and fur bacterial diversity and community structure on American southwestern bats: effects of habitat, geography and bat traits.

    Science.gov (United States)

    Winter, Ara S; Hathaway, Jennifer J M; Kimble, Jason C; Buecher, Debbie C; Valdez, Ernest W; Porras-Alfaro, Andrea; Young, Jesse M; Read, Kaitlyn J H; Northup, Diana E

    2017-01-01

    Microorganisms that reside on and in mammals, such as bats, have the potential to influence their host's health and to provide defenses against invading pathogens. However, we have little understanding of the skin and fur bacterial microbiota on bats, or factors that influence the structure of these communities. The southwestern United States offers excellent sites for the study of external bat bacterial microbiota due to the diversity of bat species, the variety of abiotic and biotic factors that may govern bat bacterial microbiota communities, and the lack of the newly emergent fungal disease in bats, white-nose syndrome (WNS), in the southwest. To test these variables, we used 16S rRNA gene 454 pyrosequencing from swabs of external skin and fur surfaces from 163 bats from 13 species sampled from southeastern New Mexico to northwestern Arizona. Community similarity patterns, random forest models, and generalized linear mixed-effects models show that factors such as location (e.g., cave-caught versus surface-netted) and ecoregion are major contributors to the structure of bacterial communities on bats. Bats caught in caves had a distinct microbial community compared to those that were netted on the surface. Our results provide a first insight into the distribution of skin and fur bat bacteria in the WNS-free environment of New Mexico and Arizona. More importantly, it provides a baseline of bat external microbiota that can be explored for potential natural defenses against pathogens.

  13. Radiation pasteurization of mink feed; Effect of irradiated feed on reproductive performance, growth and fur quality of mink

    Energy Technology Data Exchange (ETDEWEB)

    Passey, C A; Roy, D; Savoie, L [St. Hyacinthe Food Research Centre, Agriculture (Canada); Malo, R [AgriZo Vet Consultants, St. Hyacinthe, QA (Canada); Wilson, J [J.J. Wilson et Fils, Inc., St. Hyacinthe, QA (Canada)

    1990-01-01

    No significant differences were observed in the net birth rate of mink kits/female between the 7 breeding groups. However, there was reduced incidence (P=0.05) of kit deaths among the females receiving irradiated feed, and larger kit size (P<0.0001) at birth particularly for the litter size of 5-8 kits. The second generation minks born to parents receiving feed irradiated to a planned dose of 1 kGy weighed on average about 2.5% more, and their fur was on average about 1{plus minus}0.26 cm longer (12% more males making the top length grade). Moreover, there was no effect of irradiated feed on fur quality. Irradiation of mink feed with subsequent frozen storage of the meat component improved the microbiological quality by decreasing the incidence of Pseudomonas sp. and Salmonella sp. Radiation pasteurization of mink feed (frozen meat to 1 kGy, and dry feed to 2 kGy or more) should therefore help improve feed utilization, keep animals healthier, and reproducing better without affecting fur quality. (author).

  14. Sealed ion accelerator tubes (survey)

    International Nuclear Information System (INIS)

    Voitsik, L.R.

    1985-01-01

    The first publications on developing commercial models of small-scale sealed accelerator tubes in which neutrons are generated appeared in the foreign press in 1954 to 1957; they were very brief and were advertising-oriented. The tubes were designed for neutron logging of oil wells instead of ampule neutron sources (Po + Be, Ra + Be). Later, instruments of this type began to be called neutron tubes from the resulting neutron radiation that they gave off. In Soviet Union a neutron tube was developed in 1958 in connection with the development of the pulsed neutron-neutron method of studying the geological profile of oil wells. At that time the tube developed was intended, in the view of its inventors, to replace standard isotope sources with constant neutron yield. A fairly detailed survey of neutron tubes was made in the studies. 8 refs., 8 figs

  15. PWR thermocouple mechanical sealing structure

    International Nuclear Information System (INIS)

    Shen Qiuping; He Youguang

    1991-08-01

    The PWR in-core temperature detection device, which is one of measures to insure reactor safety operation, is to monitor and diagnose reactor thermal power output and in-core power distribution. The temperature detection device system uses thermocouples as measuring elements with stainless steel protecting sleeves. The thermocouple has a limited service time and should be replaced after its service time has reached. A new sealing device for the thermocouples of reactor in-core temperature detection system has been developed to facilitate replacement. The structure is complete tight under high temperature and pressure without any leakage and seepage, and easy to be assembled or disassembled in radioactive environment. The device is designed to make it possible to replace the thermocouple one by one if necessary. This is a new, simple and practical structure

  16. Study on sealing of boreholes

    International Nuclear Information System (INIS)

    1987-01-01

    A bibliographical research on the problem of the backfilling and sealing of boreholes, shafts and tunnels for radioactive waste disposal has been carried out. Various materials - both natural and artificial - like clay, industrial cement, polymer concrete, geothermical and magnesium cement have been examined. Their main physico-chemical and durability characteristics have been examined. The problem of the interaction between the sealing and the geological environment has been also dealt. The final subject discussed in the bibliography is the damage caused to the host formation by the excavation of shafts and tunnels. The laboratory tests have been performed on a natural clay and other types of material (cement grout, cement grout with expansive additive, cement mortar and remoulded clay) which have been used as plug materials. The main conclusions obtained from the tests are the following: - The permeability of the cement is lower than the permeability of the clay; - no adhesion was observed between clay and cement mortar, with or without expansive additive, when cured under different ambient conditions, but without any application of load; - When curing took place under load, good adhesion was observed between the clay and the cement mortar; - The flow of water in a specimen consisting of a clay core surrounded by remoulded clay is larger than in the natural clay. These results seem to be caused by the different permeabilities of the remoulded and undisturbed clay and not to depend on flow at the contact between the two materials. A remote instrumentation package for the in situ evaluation of the performance of a plug, has been developed. In order to get rid of the uncertainty associated with the infiltration of the cables through the plug a wireless data transmission system, based on acoustic waves, has been developed

  17. Ocean climate and seal condition

    Directory of Open Access Journals (Sweden)

    Crocker Daniel E

    2005-03-01

    Full Text Available Abstract Background The condition of many marine mammals varies with fluctuations in productivity and food supply in the ocean basin where they forage. Prey is impacted by physical environmental variables such as cyclic warming trends. The weaning weight of northern elephant seal pups, Mirounga angustirostris, being closely linked to maternal condition, indirectly reflects prey availability and foraging success of pregnant females in deep waters of the northeastern Pacific. The aim of this study was to examine the effect of ocean climate on foraging success in this deep-diving marine mammal over the course of three decades, using cohort weaning weight as the principal metric of successful resource accrual. Results The mean annual weaning weight of pups declined from 1975 to the late 1990s, a period characterized by a large-scale, basin-wide warm decadal regime that included multiple strong or long-duration El Niños; and increased with a return to a cool decadal regime from about 1999 to 2004. Increased foraging effort and decreased mass gain of adult females, indicative of reduced foraging success and nutritional stress, were associated with high ocean temperatures. Conclusion Despite ranging widely and foraging deeply in cold waters beyond coastal thermoclines in the northeastern Pacific, elephant seals are impacted significantly by ocean thermal dynamics. Ocean warming redistributes prey decreasing foraging success of females, which in turn leads to lower weaning mass of pups. Annual fluctuations in weaning mass, in turn, reflect the foraging success of females during the year prior to giving birth and signals changes in ocean temperature cycles.

  18. A hybrid floating brush seal (HFBS) for improved sealing and wear performance in turbomachinery applications

    Science.gov (United States)

    Lattime, Scott Byran

    A conceptually new type of seal has been developed for gas turbine applications which dramatically reduces wear and leakage associated with current labyrinth and brush seal technologies. The Hybrid Floating Brush Seal (HFBS) combines brush seal and film riding face seal technologies to create a hybrid seal that allows both axial and radial excursions of the sealed shaft, while simultaneously eliminating interface surface speeds (friction and heat) between the rotor and the brush material that characterize standard brush seal technology. A simple test rig was designed to evaluate feasibility of the HFBS under relatively low pressures and rotational speeds (50psig, 5krpm). A second test stand was created to study the effects of centrifugal force on bristle deflection. A third test facility was constructed for prototype development and extensive room temperature testing at moderate pressures and fairly high rotational speeds (100psig, 40krpm). This test rig also allowed the evaluation of the HFBS during axial movement of a rotating shaft. An analytical model to predict the effects of centrifugal force on the bristles of a rotating brush seal was developed. Room temperature analysis of the HFBS proved successful for relatively high operating rotational velocities at moderate pressures with very acceptable leakage rates for gas turbine engines. Brush seals were able to track rotor speeds up to 24krpm while maintaining sealing integrity. The HFBS's ability to function under axial shaft displacement and synchronous dynamic radial loading was also proven successful. Hydrodynamic performance of the face seal was proven to provide adequate stiffness and load carrying capacity to keep the brush seal from contacting the face seal at pressure drops across the brush of up to 100psi. Leakage performance over standard brush seal and labyrinth technology was quite dramatic. The HFBS showed its sealing advantage using much higher radial interference between the rotor and the bristle

  19. Does the seal licensing system in Scotland have a negative impact on seal welfare?

    Directory of Open Access Journals (Sweden)

    Laetitia Nunny

    2016-08-01

    Full Text Available This study examined the licensing system that permits seal shooting in Scotland, which was established under Part 6 Conservation of Seals of the Marine (Scotland Act 2010. Four approaches were used: data were collated and analyzed from both the Scottish Government and Scottish Marine Animal Stranding Scheme; a survey was sent to current license holders and informal interviews were conducted with key stakeholder types. Between February 2011 and the end of October 2015, 1229 gray seals and 275 common seals were reported shot under license to the Scottish Government. The numbers of seals reported as shot has reduced year-on-year since the licensing system was put in place. While some license holders, notably fish farms, were using some non-lethal forms of deterrent to reduce seal-related damage, these were often used alongside seal shooting. Of the seals reported as shot to the Scottish Government, only a small percentage were also reported to the Scottish Marine Animal Stranding Scheme, despite this being a licensing requirement. Only 2.3% of the shot gray seals and 4.5% of the shot common seals were necropsied. There is evidence from these necropsies that some seals had not died instantly or had not been shot in the manner recommended by the Scottish Seal Management Code of Practice. These preliminary results show that more carcasses need to be recovered and necropsied if the welfare implications of current seal shooting practice are to be properly assessed. The current legislation does not specify closed seasons to protect breeding seals and thirty-five per cent of necropsied seals were pregnant gray seals. Seals have also been shot during their lactation periods when pups are dependent on their mothers. This raises significant welfare concerns. The re-introduction of closed seasons specific to each species of seal is recommended along with greater effort to deploy non-lethal methods. Independent assessment of the number of seals being killed

  20. Extensive lake sediment coring survey on Sub-Antarctic Indian Ocean Kerguelen Archipelago (French Austral and Antarctic Lands)

    Science.gov (United States)

    Arnaud, Fabien; Fanget, Bernard; Malet, Emmanuel; Poulenard, Jérôme; Støren, Eivind; Leloup, Anouk; Bakke, Jostein; Sabatier, Pierre

    2016-04-01

    Recent paleo-studies revealed climatic southern high latitude climate evolution patterns that are crucial to understand the global climate evolution(1,2). Among others the strength and north-south shifts of westerlies wind appeared to be a key parameter(3). However, virtually no lands are located south of the 45th South parallel between Southern Georgia (60°W) and New Zealand (170°E) precluding the establishment of paleoclimate records of past westerlies dynamics. Located around 50°S and 70°E, lost in the middle of the sub-Antarctic Indian Ocean, Kerguelen archipelago is a major, geomorphologically complex, land-mass that is covered by hundreds lakes of various sizes. It hence offers a unique opportunity to reconstruct past climate and environment dynamics in a region where virtually nothing is known about it, except the remarkable recent reconstructions based on a Lateglacial peatbog sequence(4). During the 2014-2015 austral summer, a French-Norwegian team led the very first extensive lake sediment coring survey on Kerguelen Archipelago under the umbrella of the PALAS program supported by the French Polar Institute (IPEV). Two main areas were investigated: i) the southwest of the mainland, so-called Golfe du Morbihan, where glaciers are currently absent and ii) the northernmost Kerguelen mainland peninsula so-called Loranchet, where cirque glaciers are still present. This double-target strategy aims at reconstructing various independent indirect records of precipitation (glacier advance, flood dynamics) and wind speed (marine spray chemical species, wind-borne terrigenous input) to tackle the Holocene climate variability. Despite particularly harsh climate conditions and difficult logistics matters, we were able to core 6 lake sediment sites: 5 in Golfe du Morbihan and one in Loranchet peninsula. Among them two sequences taken in the 4km-long Lake Armor using a UWITEC re-entry piston coring system by 20 and 100m water-depth (6 and 7m-long, respectively). One

  1. Mixing and remineralization in waters detrained from the surface into Subantarctic Mode Water and Antarctic Intermediate Water in the southeastern Pacific

    Science.gov (United States)

    Carter, B. R.; Talley, L. D.; Dickson, A. G.

    2014-06-01

    A hydrographic data set collected in the region and season of Subantarctic Mode Water and Antarctic Intermediate Water (SAMW and AAIW) formation in the southeastern Pacific allows us to estimate the preformed properties of surface water detrained into these water masses from deep mixed layers north of the Subantarctic Front and Antarctic Surface Water south of the front. Using 10 measured seawater properties, we estimate: the fractions of SAMW/AAIW that originate as surface source waters, as well as fractions that mix into these water masses from subtropical thermocline water above and Upper Circumpolar Deep Water below the subducted SAMW/AAIW; ages associated with the detrained surface water; and remineralization and dissolution rates and ratios. The mixing patterns imply that cabbeling can account for ˜0.005-0.03 kg m-3 of additional density in AAIW, and ˜0-0.02 kg m-3 in SAMW. We estimate a shallow depth (˜300-700 m, above the aragonite saturation horizon) calcium carbonate dissolution rate of 0.4 ± 0.2 µmol CaCO3 kg-1 yr-1, a phosphate remineralization rate of 0.031 ± 0.009 µmol P kg-1 yr-1, and remineralization ratios of P:N:-O2:Corg of 1:(15.5 ± 0.6):(143 ± 10):(104 ± 22) for SAMW/AAIW. Our shallow depth calcium carbonate dissolution rate is comparable to previous estimates for our region. Our -O2:P ratio is smaller than many global averages. Our model suggests neglecting diapycnal mixing of preformed phosphate has likely biased previous estimates of -O2:P and Corg:P high, but that the Corg:P ratio bias may have been counteracted by a second bias in previous studies from neglecting anthropogenic carbon gradients.

  2. Prevalence of fur mites (Chirodiscoides caviae) in pet guinea pigs (Cavia porcellus) in southern Italy.

    Science.gov (United States)

    d'Ovidio, Dario; Santoro, Domenico

    2014-04-01

    Chirodiscoides caviae is the most common fur mite affecting guinea pigs; infestation is generally asymptomatic. No studies have been published on the prevalence of such mites in guinea pigs in southern Italy. We sought to evaluate the prevalence and the clinical signs of C. caviae infestation in guinea pigs in southern Italy. Clinical records of guinea pigs evaluated from August 2012 to July 2013 were retrospectively searched. In this retrospective matched case-control study, records of guinea pigs with evidence of C. caviae infestation were selected. The prevalence of C. caviae infestation was evaluated and exposure variables were assessed among guinea pigs with and without infestation using stepwise conditional logistic regression. Guinea pigs seen during the same time period, but without a diagnosis of C. caviae, were included as control animals. The prevalence of C. caviae was 32% (42 of 131); 66.6% of affected guinea pigs (28 of 42) originated from pet shops, whereas 28% (14 of 42) were privately owned. Thirty-one guinea pigs (73.8%) were asymptomatic, whereas 11 (26.1%) showed clinical signs (pruritus, alopecia, erythema and scaling). The most frequently affected area was the lumbosacral region (38 of 42). Guinea pigs in pet shops were more likely to be affected by C. caviae than owned guinea pigs (odds ratio, 5.12; 95% confidence interval, 2.32-11.29; P guinea pigs in southern Italy. Chirodiscoides mites should be sought in guinea pigs, particularly in animals coming from pet shops. © 2014 ESVD and ACVD.

  3. Analysis on the Viscous Pumping in a Magnetic Fluid Seal Under a Rotating Load and the Seal Design

    OpenAIRE

    長屋, 幸助; 大沼, 浩身; 佐藤, 淳

    1990-01-01

    This paper discusses effects of viscous pumping in a magnetic fluid seal under a rotating load. The Reynolds equation was presented for the seal based on magnetic fluid mechanics, and the expressions for obtaining pressures in the seal, eccentricities of the rotating shaft due to the viscous pumping and seal pressures were given. Numerical Calculations were carried out for some sample problems, and the effect of magnetic flux densities on the pressure in the seal and the seal pressures were c...

  4. Design and development of face seal type sealing plug for advanced heavy water reactor

    International Nuclear Information System (INIS)

    Bansal, S.; Bhattacharyya, S.; Patel, R.J.; Agrawal, R.G.; Vaze, K.K.

    2005-09-01

    Advanced Heavy Water Reactor is a vertical pressure tube type reactor having light water as its coolant and heavy water as moderator. Sealing plug is required to close the pressure boundary of main heat transport system of the reactor by preventing escape of light water/steam From the coolant channel. There are 452 coolant channels in the reactor located in square lattice pitch. Sealing plug is located at the top of each coolant channel (in the top end fitting). Top end fitting is having a stepped bore to create a sealing face. Sealing plug is held through its expanded jaws in a specially provided groove of the end fitting. The plug was designed and prototypes were manufactured considering its functional importance, intricate design and precision machining requirements. Sealing plug consists of about 20 components mostly made up of precipitation hardening stainless steel, which is suitable for water environment and meets other requirements of strength and resistance to wear and galling. Seal disc is a critical component of the sealing plug as it is the pressure-retaining component. It is a circular disc with protruded stem. One face of the seal disc is nickel plated in the peripheral area that creates the sealing by abutting against the sealing face provided in the end fitting. The typical shape and profile of seal disc provides flexibility and allows elastic deformation to assist in locking of sealing plug and creating adequate seating force for effective sealing. Design and development aspects of the sealing plug have been detailed out in this report. Also results of stress analysis and experimental studies for seal disc have been mentioned in the report. Stress analysis and experimental testing was required for the seal disc because high stresses are developed due to its exposure to high pressure and temperature environment of Main Heat Transport system. Hot testing was carried out to simulate the reactor-simulated condition. The performance was found to be

  5. Sealing glasses for titanium and titanium alloys

    Science.gov (United States)

    Brow, Richard K.; McCollister, Howard L.; Phifer, Carol C.; Day, Delbert E.

    1997-01-01

    Barium lanthanoborate sealing-glass compositions are provided comprising various combinations (in terms of mole-%) of boron oxide (B.sub.2 O.sub.3), barium oxide (BaO), lanthanum oxide (La.sub.2 O.sub.3), and at least one other oxide selected from the group consisting of aluminum oxide (Al.sub.2 O.sub.3), calcium oxide (CaO), lithium oxide (Li.sub.2 O), sodium oxide (Na.sub.2 O), silicon dioxide (SiO.sub.2), or titanium dioxide (TiO.sub.2). These sealing-glass compositions are useful for forming hermetic glass-to-metal seals with titanium and titanium alloys having an improved aqueous durability and favorable sealing characteristics. Examples of the sealing-glass compositions are provided having coefficients of thermal expansion about that of titanium or titanium alloys, and with sealing temperatures less than about 900.degree. C., and generally about 700.degree.-800.degree. C. The barium lanthanoborate sealing-glass compositions are useful for components and devices requiring prolonged exposure to moisture or water, and for implanted biomedical devices (e.g. batteries, pacemakers, defibrillators, pumps).

  6. Numerical Investigation of the Effect of Radial Lip Seal Geometry on Sealing Performance

    Science.gov (United States)

    Tok, G.; Parlar, Z.; Temiz, V.

    2018-01-01

    Sealing elements are often needed in industry and especially in machine design. With the change and development of machine technology from day to day, sealing elements show continuous development and change in parallel with these developments. Many factors influence the performance of the sealing elements such as shaft surface roughness, radial force, lip geometry etc. In addition, the radial lip seals must have a certain pre-load and interference in order to provide a good sealing. This also affects the friction torque. Researchers are developing new seal designs to reduce friction losses in mechanical systems. In the presented study, the effect of the lip seal geometry on sealing performance will be examined numerically. The numerical model created for this purpose will be verified with experimental data firstly. In the numerical model, shaft and seal will be modeled as hyper-elastic in 2D and 3D. NBR (Nitrile Butadiene Rubber) as seal material will be analyzed for the rotating shaft state at constant speed by applying a uniform radial force.

  7. Tamper-indicating quantum optical seals

    Energy Technology Data Exchange (ETDEWEB)

    Humble, Travis S [ORNL; Williams, Brian P [ORNL

    2015-01-01

    Confidence in the means for identifying when tampering occurs is critical for containment and surveillance technologies. Fiber-optic seals have proven especially useful for actively surveying large areas or inventories due to the extended transmission range and flexible layout of fiber. However, it is reasonable to suspect that an intruder could tamper with a fiber-optic sensor by accurately replicating the light transmitted through the fiber. In this contribution, we demonstrate a novel approach to using fiber-optic seals for safeguarding large-scale inventories with increased confidence in the state of the seal. Our approach is based on the use of quantum mechanical phenomena to offer unprecedented surety in the authentication of the seal state. In particular, we show how quantum entangled photons can be used to monitor the integrity of a fiber-optic cable - the entangled photons serve as active sensing elements whose non-local correlations indicate normal seal operation. Moreover, we prove using the quantum no-cloning theorem that attacks against the quantum seal necessarily disturb its state and that these disturbances are immediately detected. Our quantum approach to seal authentication is based on physical principles alone and does not require the use of secret or proprietary information to ensure proper operation. We demonstrate an implementation of the quantum seal using a pair of entangled photons and we summarize our experimental results including the probability of detecting intrusions and the overall stability of the system design. We conclude by discussing the use of both free-space and fiber-based quantum seals for surveying large areas and inventories.

  8. Reactor coolant pump seal leakage monitoring

    International Nuclear Information System (INIS)

    Stevens, D.M.; Spencer, J.W.; Morris, D.J.; James, W.; Shugars, H.G.

    1986-01-01

    Problems with reactor coolant pump seals have historically accounted for a large percentage of unscheduled outages. Studies performed for the Electric Power Research Institute (EPRI) have shown that the replacement of coolant pump seals has been one of the leading causes of nuclear plant unavailability over the last ten years. Failures of coolant pump seals can lead to primary coolant leakage rates of 200-500 gallons per minute into the reactor building. Airborne activity and high surface contamination levels following these failures require a major cleanup effort and increases the time and personnel exposure required to refurbish the pump seals. One of the problems in assessing seal integrity is the inability to accurately measure seal leakage. Because seal leakage flow is normally very small, it cannot be sensed directly with normal flow instrumentation, but must be inferred from several other temperature and flow measurements. In operating plants the leakage rate has been quantified with a tipping-bucket gauge, a device which indicates when one quart of water has been accumulated. The tipping-bucket gauge has been used for most rainfall-intensity monitoring. The need for a more accurate and less expensive gauge has been addressed. They have developed a drop-counter precipitation sensor has been developed and optimized. The applicability of the drop-counter device to the problem of measuring seal leakage is being investigated. If a review of system specification and known drop-counter performance indicates that this method is feasible for measuring seal leak rates, a drop-counter gauge will be fabricated and tested in the laboratory. If laboratory tests are successful the gauge will be demonstrated in a pump test loop at Ontario Hydro and evaluated under simulated plant conditions. 3 references, 2 figures

  9. Results of analyses of fur samples from the San Joaquin Kit Fox and associated soil and water samples from the Naval Petroleum Reserve No. 1, Tupman, California

    Energy Technology Data Exchange (ETDEWEB)

    Suter, G.W. II; Rosen, A.E.; Beauchamp, J.J. (Oak Ridge National Lab., TN (United States)); Kato, T.T. (EG and G Energy Measurements, Inc., Tupman, CA (United States))

    1992-12-01

    The purpose of this study was to determine whether analysis of the elemental content of fur from San Joaquin kit foxes (Vulpes macrotis mutica) and of water and soil from kit fox habitats could be used to make inferences concerning the cause of an observed decline in the kit fox population on Naval Petroleum Reserve No. 1 (NPR-1). Fur samples that had been collected previously from NPR-1, another oil field (NPR-2), and two sites with no oil development were subjected to neutron activation analysis. In addition, soil samples were collected from the home ranges of individual foxes from undisturbed portions of major soil types on NPR-1 and from wastewater samples were collected from tanks and sumps and subjected to neutron activation analysis. Most elemental concentrations in fur were highest at Camp Roberts and lowest on the undeveloped portions of NPR-I. Fur concentrations were intermediate on the developed oil fields but were correlated with percent disturbance and with number of wells on NPR-1 and NPR-2. The fact that most elements covaried across the range of sites suggests that some pervasive source such as soil was responsible. However, fur concentrations were not correlated with soft concentrations. The kit foxes on the developed portion of NPR-1 did not have concentrations of elements in fur relative to other sites that would account for the population decline in the early 1980s. The oil-related elements As, Ba, and V were elevated in fox fur from oil fields, but only As was sufficiently elevated to suggest a risk of toxicity in individual foxes. However, arsenic concentrations suggestive of sublethal toxicity were found in only 0.56% of foxes from developed oil fields, too few to account for a population decline.

  10. Design, construction and monitoring of sealing work

    International Nuclear Information System (INIS)

    Fischle, W.R.; Schwieger, K.

    1986-01-01

    By flooding a worked-out mine, it was possible to test the sealing work on a full scale. The aim is to erect an impermeable, statically secure seal requiring no maintenance. Apart from testing measuring equipment, data were to be obtained for later safety calculations. The measurements are also used to check the computer programs. After a dry period of over a year, flooding started at the beginning of 1985 and so did the testing of the seal and the measuring equipment in caustic soda solution. (orig./PW) [de

  11. Magnetic fluid seals for DWDM filter manufacturing

    International Nuclear Information System (INIS)

    Li Zhixin

    2002-01-01

    Performance requirements of rotary magnetic fluid seals for thin film dense wavelength division multiplexing filter manufacturing are discussed. High speed, large diameter, tight tolerance for rotating accuracy and motion control are some of the technical challenges in this application. Analytical methods for studying these technical issues and experimental data are presented. Innovative design approaches are also discussed. It is shown that using the most advanced magnetic fluid technology and seal design technology, magnetic fluid seals can provide satisfactory performance in this challenging new application

  12. Pilot cryo tunnel: Attachments, seals, and insulation

    Science.gov (United States)

    Wilson, J. F.; Ware, G. D.; Ramsey, J. W., Jr.

    1974-01-01

    Several different tests are described which simulated the actual configuration of a cryogenic wind tunnel operating at pressures up to 5 atmospheres (507 kPa) and temperatures from -320 F (78K) to 120 F (322K) in order to determine compatible bolting, adequate sealing, and effective insulating materials. The evaluation of flange attachments (continuous threaded studs) considered bolting based on compatible flanges, attachment materials, and prescribed bolt elongations. Various types of seals and seal configurations were studied to determine suitability and reusability under the imposed pressure and temperature loadings. The temperature profile was established for several materials used for structural supports.

  13. Compliant Glass Seals for SOFC Stacks

    Energy Technology Data Exchange (ETDEWEB)

    Chou, Yeong -Shyung [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Choi, Jung-Pyung [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Xu, Wei [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stephens, Elizabeth V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Koeppel, Brian J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stevenson, Jeffry W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lara-Curzio, Edgar [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2014-04-30

    This report summarizes results from experimental and modeling studies performed by participants in the Solid-State Energy Conversion Alliance (SECA) Core Technology Program, which indicate that compliant glass-based seals offer a number of potential advantages over conventional seals based on de-vitrifying glasses, including reduced stresses during stack operation and thermal cycling, and the ability to heal micro-damage induced during thermal cycling. The properties and composition of glasses developed and/or investigated in these studies are reported, along with results from long-term (up to 5,800h) evaluations of seals based on a compliant glass containing ceramic particles or ceramic fibers.

  14. Infiltrating/sealing proximal caries lesions

    DEFF Research Database (Denmark)

    Martignon, S; Ekstrand, K R; Gomez, J

    2012-01-01

    This randomized split-mouth controlled clinical trial aimed at assessing the therapeutic effects of infiltration vs. sealing for controlling caries progression on proximal surfaces. Out of 90 adult students/patients assessed at university clinics and agreeing to participate, 39, each with 3...... differences in lesion progression between infiltration and placebo (P = 0.0012) and between sealing and placebo (P = 0.0269). The study showed that infiltration and sealing are significantly better than placebo treatment for controlling caries progression on proximal lesions. No significant difference...

  15. Effect of bar sealing parameters on OPP/MCPP heat seal strength

    Directory of Open Access Journals (Sweden)

    2007-11-01

    Full Text Available The effect of bar sealing parameters on the heat seal strength of oriented polypropylene (OPP/metallic cast polypropylene (MCPP laminate film was investigated. Based on the results obtained from the parametric study, a bar sealing process window was developed. All points drop within the process window are combinations of platen temperature and dwell time that produce acceptable heat seal. Optimum combinations are indicated by the lower border of the window. The plateau initiation temperature, Tpi of OPP/MCPP laminate film used in the present study occurred before the final melting temperature, Tmf of the sealant material. The highest achievable heat seal strength was at the plateau region, and the corresponding failure modes were delaminating, tearing or combine failure modes (delaminating and tearing. Minimum pressure level of 1.25 bars is necessary to bring the laminate interface into intimate contact in order to effect sealing.

  16. Aerial surveys of seals at Rødsand seal sanctuary and adjacent haul-out sites

    DEFF Research Database (Denmark)

    Teilmann, J.; Dietz, R.; Edren, Susi M.C.

    This report describes the preliminary results of aerial surveys at Rødsand seal sanctuary, southeast Denmark and adjacent seal haul-out sites in southwestern Baltic. The work was carried out in connection with studies of potential effects of the Nysted offshore wind farm. Rødsand seal sanctuary...... is a part of seal management area 4, and the area is believed to hold a more or less closed population with little exchange to other areas. Although the harbour seal is relatively stationary there may be movements between the haul-out sites in the area. A possible reaction to disturbance from...... the construction and operation of the wind farm may be that the seals use other haul-out sites to a higher extend....

  17. Investigating the sealing capacity of a seal system in rock salt (DOPAS project)

    Energy Technology Data Exchange (ETDEWEB)

    Jantschik, Kyra; Moog, Helge C.; Czaikowski, Oliver; Wieczorek, Klaus [Gesellschaft fuer Anlagen- und Reaktorsicherheit (GRS) gGmbH, Braunschweig (Germany)

    2016-11-15

    This paper describes research and development work on plugging and sealing repositories, an issue of fundamental importance for the rock salt option which represents one of the three European repository options, besides the clay rock and the crystalline rock options. The programme aims at providing experimental data needed for the theoretical analysis of the long-term sealing capacity of concrete- based sealing materials. In order to demonstrate hydro-mechanical material stability under representative load scenarios, a comprehensive laboratory testing programme is carried out. This comprises investigation of the sealing capacity of the combined seal system and impact of the so-called excavation-damaged zones (EDZ) as well as investigation of the hydro-chemical long-term stability of the seal in contact with different brines under diffusive and advective conditions. This paper presents experimental approaches and preliminary results from laboratory investigations on salt concrete and combined systems as obtained to date.

  18. Troubleshooting ProSeal LMA

    Directory of Open Access Journals (Sweden)

    Bimla Sharma

    2009-01-01

    Full Text Available Supraglottic devices have changed the face of the airway management. These devices have contributed in a big way in airway management especially, in the difficult airway scenario significantly decreasing the pharyngolaryngeal morbidity. There is a plethora of these devices, which has been well matched by their wider acceptance in clinical practice. ProSeal laryngeal mask airway (PLMA is one such frequently used device employed for spontaneous as well as controlled ventilation. However, the use of PLMAat tunes maybe associated with certain problems. Some of the problems related with its use are unique while others are akin to the classic laryngeal mask airway (eLMA. However, expertise is needed for its safe and judicious use, correct placement, recognition and management of its various malpositions and complications. The present article describes the tests employed for proper confirmation of placementto assess the ventilatooy and the drain tube functions of the mask, diagnosis of various malpositions and the management of these aspects. All these areas have been highlighted under the heading of troubleshooting PLMA. Many problems can be solved by proper patient and procedure selection, maintaining adequate depth of anaesthesia, diagnosis and management of malpositions. Proper fixation of the device and monitoring cuff pressure intraopera-tively may bring down the incidence of airway morbidity.

  19. Rapid Sampling from Sealed Containers

    International Nuclear Information System (INIS)

    Johnston, R.G.; Garcia, A.R.E.; Martinez, R.K.; Baca, E.T.

    1999-01-01

    The authors have developed several different types of tools for sampling from sealed containers. These tools allow the user to rapidly drill into a closed container, extract a sample of its contents (gas, liquid, or free-flowing powder), and permanently reseal the point of entry. This is accomplished without exposing the user or the environment to the container contents, even while drilling. The entire process is completed in less than 15 seconds for a 55 gallon drum. Almost any kind of container can be sampled (regardless of the materials) with wall thicknesses up to 1.3 cm and internal pressures up to 8 atm. Samples can be taken from the top, sides, or bottom of a container. The sampling tools are inexpensive, small, and easy to use. They work with any battery-powered hand drill. This allows considerable safety, speed, flexibility, and maneuverability. The tools also permit the user to rapidly attach plumbing, a pressure relief valve, alarms, or other instrumentation to a container. Possible applications include drum venting, liquid transfer, container flushing, waste characterization, monitoring, sampling for archival or quality control purposes, emergency sampling by rapid response teams, counter-terrorism, non-proliferation and treaty verification, and use by law enforcement personnel during drug or environmental raids

  20. HMSRP Hawaiian Monk Seals on Social Media

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — As social media platforms develop, they potentially provide valuable information for wildlife researchers and managers. NOAA’s Hawaiian Monk Seal Research Program...

  1. Multi-Canister overpack sealing configuration

    International Nuclear Information System (INIS)

    SMITH, K.E.

    1998-01-01

    The Spent Nuclear Fuel (SNF) position regarding the Multi-Canister Overpack (MCO) sealing configuration is to initially rely on an American Society of Mechanical Engineers (ASME) Section III Subsection NB code compliant mechanical closure/sealing system to quickly and safely establish and maintain full confinement of radioactive materials prior to and during MCO fuel drying activities. Previous studies have shown the mechanical seal to be the preferred closure method, based on dose, cost, and schedule considerations. The cost and schedule impacts of redesigning the mechanical closure to a welded shield plug do not support changing the closure system. The SNF Project has determined that the combined mechanical/welded closure system meets or exceeds the regulatory requirements to provide redundant seals while accommodating key safety and schedule limitations that are unique to K Basins fuel removal effort

  2. HMSRP Hawaiian Monk Seal Fisheries Interactions data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The data set contains records of all documented hookings and/or entanglements of Hawaiian monk seals with actively fished gear, both commercial and recreational. The...

  3. Temporary fire sealing of penetrations on TFTR

    International Nuclear Information System (INIS)

    Hondorp, H.L.

    1981-02-01

    The radiation shielding provided for TFTR for D-D and D-T operation will be penetrated by numerous electrical and mechanical services. Eventually, these penetrations will have to be sealed to provide the required fire resistance, tritium sealability, pressure integrity and radiation attenuation. For the initial hydrogen operation, however, fire sealing of the penetrations in the walls and floor is the primary concern. This report provides a discussion of the required and desirable properties of a temporary seal which can be used to seal these penetrations for the hydrogen operation and then subsequently be removed and replaced as required for the D-D and D-T operations. Several candidate designs are discussed and evaluated and recommendations are made for specific applications

  4. HMSRP Hawaiian Monk Seal Microsatellite Genotypes

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Currently ~2,400 Hawaiian monk seal specimens have been analyzed genetically, providing genotypes at 18 microsatellite loci. These data are organized by individual,...

  5. HMSRP Hawaiian Monk Seal Survival Factors

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records of survival factors recorded by PSD personnel and cooperating scientists as part of the ongoing monk seal population assessment...

  6. Cask systems development program seal technology

    International Nuclear Information System (INIS)

    Madsen, M.M.; Humphreys, D.L.; Edwards, K.R.

    1991-01-01

    General design or test performance requirements for radioactive materials (RAM) packages are specified in Title 10 of the US Code of Federal Regulations Part 71 (10 CFR 71). Seals that provide the containment system interface between the packaging body and the closure must function in both high- and low-temperature environments under dynamic and static conditions. Experiments were performed to characterize the performance of several seal materials at low temperatures. Helium leak tests on face seals were used to compare the materials. Materials tested include butyl, neoprene, ethylene propylene, fluorosilicone, silicone, Eypel, Kalrez, Teflon, fluorocarbon, and Teflon/silicone composites. Results show that the seal materials tested, with the exception of silicone S613-60, are not leak tight (1 x 10 -7 std cm 3 /s) at manufacturer low-temperature ratings

  7. Magnetic vector field tag and seal

    Science.gov (United States)

    Johnston, Roger G.; Garcia, Anthony R.

    2004-08-31

    One or more magnets are placed in a container (preferably on objects inside the container) and the magnetic field strength and vector direction are measured with a magnetometer from at least one location near the container to provide the container with a magnetic vector field tag and seal. The location(s) of the magnetometer relative to the container are also noted. If the position of any magnet inside the container changes, then the measured vector fields at the these locations also change, indicating that the tag has been removed, the seal has broken, and therefore that the container and objects inside may have been tampered with. A hollow wheel with magnets inside may also provide a similar magnetic vector field tag and seal. As the wheel turns, the magnets tumble randomly inside, removing the tag and breaking the seal.

  8. Concepts for backfilling and sealing of shafts

    International Nuclear Information System (INIS)

    Pierau, B.

    1990-01-01

    The disposal site is situated at a depth of 1000 to 1200 meters. It is covered by very thick cretatious mudstone layers forming the main barrier against the spread of radioactively contaminated water into the biosphere. Because of the excavation works and the resulting stress redistributions, the material surrounding the shafts is probably broken up, which leads to increased permeability in comparison with the intact rock. It is planned to backfill the shafts with an insoluble mineral mixture including a fine fraction necessary to achieve the sealing required. The joints and cracks in the brocken-up surrounding material are believed to be sealed by themselves due to swelling of the mudstone. Some strata of the mudstone contain more than 20% of smektite, a swelling clay mineral. Those regions, where the broken-up zone cannot be considered sure to self-seal due to swelling, are planned to be sealed by pressure grouting using clay suspension. (orig./HP) [de

  9. Valve seat pores sealed with thermosetting monomer

    Science.gov (United States)

    Olmore, A. B.

    1966-01-01

    Hard anodic coating provides a smooth wear resistant value seating surface on a cast aluminum alloy valve body. Vacuum impregnation with a thermosetting monomer, diallyl phthalate, seals the pores on the coating to prevent galvanic corrosion.

  10. HMSRP Hawaiian Monk Seal Survey Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records of Hawaiian monk seal and green turtle sightings in the Northwestern Hawaiian Islands (NWHI) since 1982 at Lisianski Island, and since...

  11. Fuel cell cassette with compliant seal

    Science.gov (United States)

    Karl, Haltiner, Jr. J.; Anthony, Derose J.; Klotzbach, Darasack C.; Schneider, Jonathan R.

    2017-11-07

    A fuel cell cassette for forming a fuel cell stack along a fuel cell axis includes a cell retainer, a plate positioned axially to the cell retainer and defining a space axially with the cell retainer, and a fuel cell having an anode layer and a cathode layer separated by an electrolyte layer. The outer perimeter of the fuel cell is positioned in the space between the plate and the cell retainer, thereby retaining the fuel cell and defining a cavity between the cell retainer, the fuel cell, and the plate. The fuel cell cassette also includes a seal disposed within the cavity for sealing the edge of the fuel cell. The seal is compliant at operational temperatures of the fuel cell, thereby allowing lateral expansion and contraction of the fuel cell within the cavity while maintaining sealing at the edge of the fuel cell.

  12. HMSRP Hawaiian Monk Seal Tag Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains records for all tags applied to Hawaiian monk seals since 1981. These tags were applied by PSD personnel and cooperating scientists as part of...

  13. Management of spent sealed sources in Indonesia

    International Nuclear Information System (INIS)

    Wisnubroto, D.S.

    2002-01-01

    This paper describes the effort of the Center for Development of Radioactive Waste Management (CDRWM) to develop and implement activities in maintaining and improving the safety of spent sealed radiation sources and the security of radioactive materials over their life cycle. There is a wide variety of uses of radiation sources and radioactive materials in Indonesia, while the CDRWM plan to cover all spent radiation sources. Primary consideration is given to sealed radiation sources with relatively high levels of radioactivity which might necessitate interventional measures should control over them be lost. The policy of the Government of Indonesia for spent radiation sources is, whenever possible, spent sealed sources should be returned to the supplier. CDRWM has a general principle that sealed sources should not be removed from their holders, or the holders physically modified (except for Ra-226 needles, smoke detector and lighting preventer). (author)

  14. Inflatable Module Seal Interface Development and Testing

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop a repeatable low permeable sealing interface evaluating O-ring, RTV bond and flowed RTV bond methods. Advanced Bladder materials (ArmorFlex, Nanoclay, etc)...

  15. HMSRP Hawaiian Monk Seal Photo Identification Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This photo collection contains identification and other images and video of Hawaiian monk seals taken by PSD personnel and cooperating scientists as part of the...

  16. Epoxy resins used to seal brachytherapy seed

    International Nuclear Information System (INIS)

    Ferreira, Natalia Carolina Camargos; Ferraz, Wilmar Barbosa; Reis, Sergio Carneiro dos; Santos, Ana Maria Matildes dos

    2013-01-01

    Prostate cancer treatment with brachytherapy is recommended for patients with cancer at an early stage. In this treatment, small radioactive seeds are implanted directly in the prostate gland. These seeds are composed at least of one radionuclide carrier and an X-ray marker enclosed within a metallic tube usually sealed by laser process. This process is expensive and, furthermore, it can provoke a partial volatilization of the radionuclide and change the isotropy in dose distribution around the seed. In this paper, we present a new sealing process using epoxy resin. Three kinds of resins were utilized and characterized by scanning electron microscopy (SEM), energy dispersive X ray (EDS) and by differential scanning calorimetry (DSC) after immersion in simulated body fluid (SBF) and in sodium iodine solution (NaI). The sealing process showed excellent potential to replace the sealing laser usually employed. (author)

  17. Crashworthy sealed pressure vessel for plutonium transport

    International Nuclear Information System (INIS)

    Andersen, J.A.

    1980-01-01

    A rugged transportation package for the air shipment of radioisotopic materials was recently developed. This package includes a tough, sealed, stainless steel inner containment vessel of 1460 cc capacity. This vessel, intended for a mass load of up to 2 Kg PuO 2 in various isotopic forms (not to exceed 25 watts thermal activity), has a positive closure design consisting of a recessed, shouldered lid fastened to the vessel body by twelve stainless-steel bolts; sealing is accomplished by a ductile copper gasket in conjunction with knife-edge sealing beads on both the body and lid. Follow-on applications of this seal in newer, smaller packages for international air shipments of plutonium safeguards samples, and in newer, more optimized packages for greater payload and improved efficiency and utility, are briefly presented

  18. HMSRP Hawaiian Monk Seal Necropsy Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains information on Hawaiian monk seal gross necropsy (in some cases only field notes or minimal information) and histopathology results beginning...

  19. Onboard Acoustic Recording from Diving Elephant Seals

    National Research Council Canada - National Science Library

    Fletcher, Stacia

    1996-01-01

    The aim of this project was to record sounds impinging on free-ranging northern elephant seals, Mirounga angustirostris, a first step in determining the importance of LFS to these animals as they dive...

  20. Description of Pseudingolfiella possessionis n. sp. (Crustacea, Amphipoda) from sub-Antarctic Île de La Possession, Crozet archipelago: the second freshwater amphipod known from the Antarctic biome, a human introduction of Gondwanan ancestry?

    Science.gov (United States)

    Smet, Willem H De

    2015-03-31

    A new species of freshwater amphipod, Pseudingolfiella possessionis n. sp. (Senticaudata, Pseudingolfiellidae), is described from the submerged moss vegetation of small brooklets at sub-Antarctic Île de La Possession, Crozet archipelago. It constitutes the second freshwater amphipod species known for the sub-Antarctic and Antarctic region, and the fourth member of the genus. The main characters distinguishing it from all congeners are: the spine on the posterior margin of the dactylus, incisor and lamina mobilis of mandible each with 5 teeth, the setation of the maxilliped, the vestigial second article of pleopod 3 in the female, the undulate and laterally notched posterolateral margin of the external ramus of uropods 1 and 2 in the male, the spinulate dorsomedian projection of the telson.