Negative polarity of phenyl-C{sub 61} butyric acid methyl ester adjacent to donor macromolecule domains

Energy Technology Data Exchange (ETDEWEB)

Alley, Olivia J.; Dawidczyk, Thomas J.; Hardigree, Josué F. Martínez; Katz, Howard E., E-mail: hekatz@jhu.edu [Department of Materials Science and Engineering, Johns Hopkins University, 206 Maryland Hall, 3400 North Charles Street, Baltimore, Maryland 21218 (United States); Wu, Meng-Yin [Department of Electrical and Computer Engineering, University of Wisconsin, 415 Engineering Drive, Madison, Wisconsin 53706 (United States); Johns, Gary L.; Markovic, Nina [Department of Physics and Astronomy, Johns Hopkins University, 3400 North Charles Street, Baltimore, Maryland 21218 (United States); Arnold, Michael S. [Department of Materials Science and Engineering, University of Wisconsin, 248 MS and E Building, 1509 University Avenue, Madison, Wisconsin 53706 (United States)

2015-01-19

Interfacial fields within organic photovoltaics influence the movement of free charge carriers, including exciton dissociation and recombination. Open circuit voltage (V{sub oc}) can also be dependent on the interfacial fields, in the event that they modulate the energy gap between donor HOMO and acceptor LUMO. A rise in the vacuum level of the acceptor will increase the gap and the V{sub oc}, which can be beneficial for device efficiency. Here, we measure the interfacial potential differences at donor-acceptor junctions using Scanning Kelvin Probe Microscopy, and quantify how much of the potential difference originates from physical contact between the donor and acceptor. We see a statistically significant and pervasive negative polarity on the phenyl-C{sub 61} butyric acid methyl ester (PCBM) side of PCBM/donor junctions, which should also be present at the complex interfaces in bulk heterojunctions. This potential difference may originate from molecular dipoles, interfacial interactions with donor materials, and/or equilibrium charge transfer due to the higher work function and electron affinity of PCBM. We show that the contact between PCBM and poly(3-hexylthiophene) doubles the interfacial potential difference, a statistically significant difference. Control experiments determined that this potential difference was not due to charges trapped in the underlying substrate. The direction of the observed potential difference would lead to increased V{sub oc}, but would also pose a barrier to electrons being injected into the PCBM and make recombination more favorable. Our method may allow unique information to be obtained in new donor-acceptor junctions.

Mutual passivation of group IV donors and isovalent nitrogen in diluted GaN{sub x}As{sub 1-x} alloys

Energy Technology Data Exchange (ETDEWEB)

Yu, K.M.; Wu, J.; Walukiewicz, W.; Shan, W.; Beeman, J.; Mars, D.E.; Chamberlin, D.R.; Scarpulla, M.A.; Dubon, O.D.; Ridgway, M.C.; Geisz, J.F.

2003-07-23

We demonstrate the mutual passivation of electrically active group IV donors and isovalent N atoms in the GaN{sub x}As{sub 1-x} alloy system. This phenomenon occurs through the formation of a donor-nitrogen bond in the nearest neighbor IV{sub Ga}-N{sub As} pairs. In Si doped GaInN{sub 0.017}As{sub 0.983} the electron concentration starts to decrease rapidly at an annealing temperature of 700 C from {approx} 3 x 10{sup 19}cm{sup -3} in the as-grown state to less than 10{sup 16}cm{sup -3} after an annealing at 900 C for 10 s. At the same time annealing of this sample at 950 C increases the gap by about 35 meV, corresponding to a reduction of the concentration of the active N atoms by an amount very close to the total Si concentration. We also show that the formation of Si{sub Ga}-N{sub As} pairs is controlled by the diffusion of Si via Ga vacancies to the nearest N{sub As} site. The general nature of this mutual passivation effect is confirmed by our study of Ge doped GaN{sub x}As{sub 1-x} layers formed by N and Ge co-implantation in GaAs followed by pulsed laser melting.

ATOMIC-LEVEL IMAGING OF CO2 DISPOSAL AS A CARBONATE MINERAL: OPTIMIZING REACTION PROCESS DESIGN; A

International Nuclear Information System (INIS)

M.J. McKelvy; R. Sharma; A.V.G. Chizmeshya; H. Bearat; R.W. Carpenter

2001-01-01

Fossil fuels, especially coal, can support the energy demands of the world for centuries to come, if the environmental problems associated with CO(sub 2) emissions can be overcome. Permanent and safe methods for CO(sub 2) capture and disposal/storage need to be developed. Mineralization of stationary-source CO(sub 2) emissions as carbonates can provide such safe capture and long-term sequestration. Mg-rich lamellar-hydroxide based minerals (e.g., brucite and serpentine) offer a class of widely available, low-cost materials, with intriguing mineral carbonation potential. Carbonation of such materials inherently involves dehydroxylation, which can disrupt the material down to the atomic level. As such, controlled dehydroxylation, before and/or during carbonation, may provide an important parameter for enhancing carbonation reaction processes. Mg(OH)(sub 2) was chosen as the model material for investigating lamellar hydroxide mineral dehydroxylation/carbonation mechanisms due to (i) its structural and chemical simplicity, (ii) interest in Mg(OH)(sub 2) gas-solid carbonation as a potentially cost-effective CO(sub 2) mineral sequestration process component, and (iii) its structural and chemical similarity to other lamellar-hydroxide-based minerals (e.g., serpentine-based minerals) whose carbonation reaction processes are being explored due to their low-cost CO(sub 2) sequestration potential. Fundamental understanding of the mechanisms that govern dehydroxylation/carbonation processes is essential for minimizing the cost of any lamellar-hydroxide-based mineral carbonation sequestration process. This report covers the third year progress of this grant, as well as providing an integrated overview of the progress in years 1-3, as we have been granted a one-year no-cost extension to wrap up a few studies and publications to optimize project impact

Overview on CO{sub 2} Valorization: Challenge of Molten Carbonates

Energy Technology Data Exchange (ETDEWEB)

Chery, Déborah; Lair, Virginie; Cassir, Michel, E-mail: michel.cassir@chimie-paristech.fr [Chimie ParisTech, CNRS, Institut de Recherche de Chimie Paris, PSL Research University, Paris (France)

2015-10-02

The capture and utilization of CO{sub 2} is becoming progressively one of the significant challenges in the field of energetic resources. Whatever the energetic device, it is impossible to avoid completely the production of greenhouse gas, even parting from renewable energies. Transforming CO{sub 2} into a valuable fuel, such as alcohols, CO, or even C, could constitute a conceptual revolution in the energetic bouquet offering a huge application domain. Although several routes have been tested for this purpose, on which a general panorama will be given here, molten carbonates are attracting a renewed interest aiming at dissolving and reducing carbon dioxide in such melts. Because of their unique properties, molten carbonates are already used as electrolytes in molten carbonate fuel cells; they can also provoke a breakthrough in a new economy considering CO{sub 2} as an energetic source rather than a waste. Molten carbonates’ science and technology is becoming a strategic field of research for energy and environmental issues. Our aim in this review is to put in evidence the benefits of molten carbonates to valorize CO{sub 2} and to show that it is one of the most interesting routes for such application.

Carbon coated Li{sub 4}Ti{sub 5}O{sub 12} nanorods as superior anode material for high rate lithium ion batteries

Energy Technology Data Exchange (ETDEWEB)

Luo, Hongjun; Shen, Laifa; Rui, Kun; Li, Hongsen; Zhang, Xiaogang, E-mail: azhangxg@nuaa.edu.cn

2013-09-25

Highlights: •A novel approach has been developed to fabricate 1D Li{sub 4}Ti{sub 5}O{sub 12}/C nanorods by a wet-chemical route. •Carbon coating layer effectively restrict the particle growth and enhance electronic conductivity. •The Li{sub 4}Ti{sub 5}O{sub 12}/C nanorods exhibit remarkable rate capability and long cycle life. -- Abstract: We describe a novel approach for the synthesis of carbon coated Li{sub 4}Ti{sub 5}O{sub 12} (Li{sub 4}Ti{sub 5}O{sub 12}/C) nanorods for high rate lithium ion batteries. The carbon coated TiO{sub 2} nanotubes using the glucose as carbon source are first synthesized by hydrothermal treatment. The commercial anatase TiO{sub 2} powder is immersed in KOH sulotion and subsequently transforms into Li{sub 4}Ti{sub 5}O{sub 12}/C in LiOH solution under hydrothermal condition. Field-emission scanning electron microscopy, transmission electron microscopy, X-ray diffraction, nitrogen adsorption/desorption and Raman spectra are performed to characterize their morphologies and structures. Compared with the pristine Li{sub 4}Ti{sub 5}O{sub 12}, one-dimensional (1D) Li{sub 4}Ti{sub 5}O{sub 12}/C nanostructures show much better rate capability and cycling stability. The 1D Li{sub 4}Ti{sub 5}O{sub 12}/C architectures effectively restrict the particle growth and enhance their electronic conductivity, enabling fast ion and electron transport.

Semiconductor CdF<sub>2sub>:Ga and CdF<sub>2sub>:In Crystals as Media for Real-Time Holography

Directory of Open Access Journals (Sweden)

Alexander E. Angervaks

2012-05-01

Full Text Available Monocrystalline cadmium fluoride is a dielectric solid that can be converted into a semiconductor by doping with donor impurities and subsequent heating in the reduction atmosphere. For two donor elements, Ga and In, the donor (“shallow” state is a metastable one separated from the ground (“deep” state by a barrier. Photoinduced deep-to-shallow state transition underlies the photochromism of CdF<sub>2sub>:Ga and CdF<sub>2sub>:In. Real-time phase holograms are recorded in these crystals capable of following up optical processes in a wide frequency range. The features of photochromic transformations in CdF<sub>2sub>:Ga and CdF<sub>2sub>:In crystals as well as holographic characteristics of these media are discussed. Exemplary applications of CdF<sub>2sub>-based holographic elements are given.

Optimizing donor scheduling before recruitment: An effective approach to increasing apheresis platelet collections.

Science.gov (United States)

Lokhandwala, Parvez M; Shike, Hiroko; Wang, Ming; Domen, Ronald E; George, Melissa R

2018-01-01

Typical approach for increasing apheresis platelet collections is to recruit new donors. Here, we investigated the effectiveness of an alternative strategy: optimizing donor scheduling, prior to recruitment, at a hospital-based blood donor center. Analysis of collections, during the 89 consecutive months since opening of donor center, was performed. Linear regression and segmented time-series analyses were performed to calculate growth rates of collections and to test for statistical differences, respectively. Pre-intervention donor scheduling capacity was 39/month. In the absence of active donor recruitment, during the first 29 months, the number of collections rose gradually to 24/month (growth-rate of 0.70/month). However, between month-30 and -55, collections exhibited a plateau at 25.6 ± 3.0 (growth-rate of -0.09/month) (pcollection days/week (month-72). Consequently, the scheduling capacity increased to 130/month. Post-interventions, apheresis platelet collections between month-56 and -81 exhibited a spontaneous renewed growth at a rate of 0.62/month (pcollections. Apheresis platelet collections plateau at nearly 2/3rd of the scheduling capacity. Optimizing the scheduling capacity prior to active donor recruitment is an effective strategy to increase platelet collections at a hospital-based donor center.

Modification process optimization, characterization and adsorption property of granular fir-based activated carbon

Energy Technology Data Exchange (ETDEWEB)

Chen, Congjin, E-mail: gxdxccj@163.com [School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004 (China); Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology, Guangxi University, Nanning 530004 (China); Li, Xin [School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004 (China); Tong, Zhangfa [School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004 (China); Guangxi Key Laboratory of Petrochemical Resource Processing and Process Intensification Technology, Guangxi University, Nanning 530004 (China); Li, Yue [School of Chemistry and Chemical Engineering, Guangxi University, Nanning 530004 (China); Li, Mingfei [Beijing Key Laboratory of Lignocellulosic Chemistry, Beijing Forestry University, Beijing 100083 (China)

2014-10-01

Highlights: • Granular fir-based activated carbon (GFAC) was modified with H{sub 2}O{sub 2}. • Orthogonal array design method was used to optimize the modification process. • Optimized parameters were: aqueous H{sub 2}O{sub 2} concentration 1.0 mol l{sup −1}, modification temperature and time 30.0 °C and 4.0 h. • Adsorption capacity of the modified GFAC increased by 500.0% (caramel), 59.7% (methylene blue), 32.5% (phenol), and 15.1% (I{sub 2}). • The pore structure parameters and surface oxygen groups changed in the modified GFAC. - Abstract: Granular fir-based activated carbon (GFAC) was modified with H{sub 2}O{sub 2}, and orthogonal array experimental design method was used to optimize the process. The properties of the original and modified GFAC were characterized by N{sub 2} adsorption–desorption isotherms, Brunauer–Emmett–Teller (BET) equation, Barett–Joyner–Halenda (BJH) equation, field emission scanning electron microscopy (FESEM), and Fourier transform infrared spectroscopy (FT-IR) analysis, etc. When 10.00 g of GFAC with particle size of 0.25–0.85 mm was modified by 150.0 ml of aqueous H{sub 2}O{sub 2} solution, the optimized conditions were found to be as follows: aqueous H{sub 2}O{sub 2} solution concentration 1.0 mol·l{sup −1}, modification temperature 30.0 °C, modification time 4.0 h. Modified under the optimized conditions, decolonization of caramel, methylene blue adsorption, phenol adsorption and iodine number of the modified GFAC increased by 500.0%, 59.7%, 32.5%, and 15.1%, respectively. The original and optimally modified GFAC exhibited adsorption isotherms of hybrid Type I–IV isotherms with H4 hysteresis. BET surface area, micropore area, total pore volume, micropore volume, and microporosity of the modified GFAC increased by 7.33%, 11.25%, 3.89%, 14.23%, 9.91%, respectively. Whereas the average pore width decreased by 3.16%. In addition, the amount of surface oxygen groups (such as carbonyl or carboxyl) increased

Coal derivates for reduction of SO{sub 2} N0{sub x}; Derivados del Carbon para la Reduccion de SO{sub 2}-NO{sub x}

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

moulding stage). Potassium containing briquettes exhibit a considerable capacity for NO{sub x} reduction and, interestingly, are quite selective towards NO{sub x} reduction against oxygen gasification. This behaviour is very important, taking into account that one of the main disadvantages of carbonaceous materials in NO{sub x} pollution control is the great consumption of carbon due to oxygen combustion.

Coal materials for the reduction of SO{sub 2}-NO{sub x}; Derivados del carbon para la reduccion de SO{sub 2}-No{sub x}

Energy Technology Data Exchange (ETDEWEB)

1999-09-01

stage). Potassium containing briquettesexhibit a considerable capacity for NO{sub x} reduction and, interestingly, are quite selective towards NO{sub x} reduction against oxygen gasification. This behaviour is very important, taking into account that one of the main disadvantages of carbonaceous materials in NO{sub x} pollution control is the great consumption of carbon due to oxygen combustion. (Author)

The electrochemical behavior of Co(TPTZ){sub 2} complex on different carbon based electrodes modified with TiO{sub 2} nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Ortaboy, Sinem, E-mail: ortaboy@istanbul.edu.tr; Atun, Gülten, E-mail: gatun@istanbul.edu.tr

2015-04-15

Electrochemical behavior of cobalt (II) complex with the N-donor ligand 2,2′-bipyridyl-1,3,5-tripyridyl-s-triazine (TPTZ) was investigated to elucidate the electron-proton transfer mechanisms. The electrochemical response of the complex was studied using square-wave voltammetry (SWV) and electrochemical impedance spectroscopy (EIS) techniques. A conventional three-electrode system, consisting of glassy carbon (GCE), TiO{sub 2} modified glassy carbon (T/GCE), carbon paste (CPE) and TiO{sub 2} modified carbon paste (T/CPE) working electrodes were employed. The ligand/metal ratio and stability constant of the complex as well as the mechanisms of the electrode processes were elucidated by examining the effects of pH, ligand concentration and frequency on the voltammograms. The EIS results indicated that the samples modified with TiO{sub 2} had the higher charge transfer resistance than that of the bare electrodes and also suggested that the electroactivity of the electrode surfaces increased in the following order, T/CPE > CPE > T/GCE > GCE. The surface morphology of the working electrodes was also characterized by atomic force microscopy (AFM). The values of surface roughness parameters were found to be consistent with the results obtained by EIS experiments. - Graphical abstract: Schematic illustration of the experimental process. - Highlights: • Electrochemical behavior of Co(TPTZ){sub 2} complex studied by SWV and EIS techniques. • GCE, CPE T/GCE and T/CPE were used as working electrodes for comparative studies. • The surface morphologies of the electrodes were characterized by AFM. • Mechanisms were proposed from the effects of pH, ligand concentration and frequency. • EIS and morphologic relationships of the surfaces were established successfully.

Magnéli phases Ti{sub 4}O{sub 7} and Ti{sub 8}O{sub 15} and their carbon nanocomposites via the thermal decomposition-precursor route

Energy Technology Data Exchange (ETDEWEB)

Conze, S., E-mail: susan.conze@ikts.fraunhofer.de [Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Winterbergstr. 28, 01277 Dresden (Germany); Veremchuk, I. [Max-Planck-Institut für Chemische Physik fester Stoffe, Nöthnitzer Straße 40, 01187 Dresden (Germany); Reibold, M. [Technical University of Dresden, Zum Triebenberg 50, 01328 Dresden (Zaschendorf) (Germany); Matthey, B.; Michaelis, A. [Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Winterbergstr. 28, 01277 Dresden (Germany); Grin, Yu. [Max-Planck-Institut für Chemische Physik fester Stoffe, Nöthnitzer Straße 40, 01187 Dresden (Germany); Kinski, I. [Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Winterbergstr. 28, 01277 Dresden (Germany)

2015-09-15

A new synthetic approach for producing nano-powders of the Magnéli phases Ti{sub 4}O{sub 7}, Ti{sub 8}O{sub 15} and their carbon nanocomposites by thermal decomposition-precursor route is proposed. The formation mechanism of the single-phase carbon nanocomposites (Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C) from metal–organic precursors is studied using FT-IR, elemental analysis, TG, STA-MS and others. The synthesis parameters and conditions were optimized to prepare the target oxides with the desired microstructure and physical properties. The electrical and transport properties of Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are investigated. These nano-materials are n-type semiconductors with relatively low thermal conductivity in contrast to the bulk species. The nanostructured carbon nanocomposites of Magnéli phases achieve a low thermal conductivity close to 1 W/m K at RT. The maximum ZT{sub 570} {sub °C} values are 0.04 for Ti{sub 4}O{sub 7}/C powder nanocomposite and 0.01 for Ti{sub 8}O{sub 15}/C bulk nanocomposite. - Graphical abstract: From the precursor to the produced titanium oxide pellet and its microstructure (SEM, TEM micrographs) as well as results of phase and thermoelectric analyses. - Highlights: • Magnéli phases Ti{sub 4}O{sub 7}/Ti{sub 8}O{sub 15} via thermal decomposition-precursor route is proposed. • The formation mechanism of the nanocomposites Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are investigated. • Microstructure of Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are examined. • The electrical and transport properties of Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are investigated. • The maximum figure of mertit ZT{sub 570} {sub °C} of Ti{sub 4}O{sub 7}/C and Ti{sub 8}O{sub 15}/C are 0.01 and 0.04.

Optimal screening and donor management in a public stool bank.

Science.gov (United States)

Kazerouni, Abbas; Burgess, James; Burns, Laura J; Wein, Lawrence M

2015-12-17

Fecal microbiota transplantation is an effective treatment for recurrent Clostridium difficile infection and is being investigated as a treatment for other microbiota-associated diseases. To facilitate these activities, an international public stool bank has been created, which screens donors and processes stools in a standardized manner. The goal of this research is to use mathematical modeling and analysis to optimize screening and donor management at the stool bank. Compared to the current policy of screening active donors every 60 days before releasing their quarantined stools for sale, costs can be reduced by 10.3 % by increasing the screening frequency to every 36 days. In addition, the stool production rate varies widely across donors, and using donor-specific screening, where higher producers are screened more frequently, also reduces costs, as does introducing an interim (i.e., between consecutive regular tests) stool test for just rotavirus and C. difficile. We also derive a donor release (i.e., into the system) policy that allows the supply to approximately match an exponentially increasing deterministic demand. More frequent screening, interim screening for rotavirus and C. difficile, and donor-specific screening, where higher stool producers are screened more frequently, are all cost-reducing measures. If screening costs decrease in the future (e.g., as a result of bringing screening in house), a bottleneck for implementing some of these recommendations may be the reluctance of donors to undergo serum screening more frequently than monthly.

Enhanced photocatalytic activity towards degradation and H{sub 2} evolution over one dimensional TiO{sub 2}@MWCNTs heterojunction

Energy Technology Data Exchange (ETDEWEB)

Zhang, Xiao [CAS Key Laboratory of Standardization and Measurement for Nanotechnology, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing 100190 (China); Key Laboratory of Luminescence and Optical Information of the Ministry of Education Institute of Optoelectronics Technology, Beijing Jiaotong University, Beijing 100044 (China); Cao, Shuang; Wu, Zhijiao [CAS Key Laboratory of Standardization and Measurement for Nanotechnology, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing 100190 (China); Zhao, Suling, E-mail: slzhao@bjtu.edu.cn [Key Laboratory of Luminescence and Optical Information of the Ministry of Education Institute of Optoelectronics Technology, Beijing Jiaotong University, Beijing 100044 (China); Piao, Lingyu, E-mail: piaoly@nanoctr.cn [CAS Key Laboratory of Standardization and Measurement for Nanotechnology, CAS Center for Excellence in Nanoscience, National Center for Nanoscience and Technology, Beijing 100190 (China)

2017-04-30

Highlights: • One dimensional TiO{sub 2}@MWCNTs core-shell photocatalyst constructed. • The TiO{sub 2} nanoparticles are highly dispersed on the MWCNTs. • The layer thickness adjusted for different nanocomposites. • The 1D heterojunction enhancing electron transfers. - Abstract: With the distinct electronic and optical properties, multiwall carbon nanotubes (MWCNTs) are identified as an outstanding catalyst support, which can effectively improve the performance of the TiO{sub 2} photocatalysts. Herein, the unique one dimensional TiO{sub 2}@MWCNTs nanocomposites have been prepared by a facile hydrothermal method. The TiO{sub 2} coating layers are extremely uniform and the thickness is adjustable for different nanocomposites. XPS measurements confirm that intimate electronic interactions are existed between MWCNTs and TiO{sub 2} via interfacial Ti−O−C bond and the photoluminescence intensity of the TiO{sub 2}@MWCNTs nanocomposites are effectively quenched compared with pure TiO{sub 2}, suggesting the fast electron transfer rates. The thickness of TiO{sub 2} coating layers of the TiO{sub 2}@MWCNTs nanocomposites plays a significant role in the photocatalytic degradation of organic pollutants, such as methylene blue (MB) and Rhodamine B (RhB), and photocatalytic H{sub 2} evolution from water. Due to the formation of one dimensional heterojunction of TiO{sub 2}@MWCNTs nanocomposites and the positive synergistic effect between TiO{sub 2} and carbon nanotubes, it is found that the photocatalytic activity of the system is significantly improved.

Optimized CO{sub 2} miscible hydrocarbon fracturing fluids

Energy Technology Data Exchange (ETDEWEB)

Taylor, R.S.; Funkhouser, G.P.; Fyten, G.; Attaway, D.; Watkins, H. [Halliburton Energy Services, Calgary, AB (Canada); Lestz, R.S. [Chevron Canada Resources, Calgary, AB (Canada); Loree, D. [FracEx Inc. (Canada)

2006-07-01

Carbon dioxide (CO{sub 2}) miscible hydrocarbon fracturing fluids address issues of fluid retention in low-permeability gas reservoirs, including undersaturated and underpressured reservoirs. An optimized surfactant gel technology using carbon dioxide (CO{sub 2}) hydrocarbon fracturing fluids applicable to all gas-well stimulation applications was discussed in this paper. The crosslinked surfactant gel technology improved proppant transport, leakoff control, and generation of effective fracture half-length. Tests indicated that application of the surfactant cooled the fracture face, which had the effect of extending break times and increasing viscosity during pumping periods. Rapid recovery of the fracturing fluid eliminated the need for swabbing in some cases, and the fluid system was not adversely affected by shear. However, rheological test equipment capable of mixing liquid CO{sub 2} and viscosified hydrocarbons at downhole temperatures is required to determine rheology and required chemical concentrations. It was recommended that to achieve an effective methane-drive cleanup mechanism, treatments should be designed so that the gellant system can be effective with up to 50 per cent CO{sub 2} dissolved in oil. It was concluded that it should be possible to apply the technology to low permeability gas reservoirs. Viscosity curves and friction data were presented. Issues concerning the selection of tubulars and flowback procedures were also discussed. It was suggested that the cost of the hydrocarbon fracturing fluid can be recovered by the sale of recovered load fluid. 6 refs., 4 figs.

Carbonation of Mg(OH){sub 2} in a pressurised fluidised bed for CO{sub 2} sequestration

Energy Technology Data Exchange (ETDEWEB)

Fagerlund, J.

2012-07-01

To date, a number of methods to accelerate natural weathering or in other words increase the CO{sub 2} uptake rate of various minerals have been suggested; commonly this is known as mineral carbonation or CO{sub 2} mineralisation. A brief literature review of recently published articles in this field is presented, showing that the interest in mineral carbonation is increasing. However, it should be noted that mineral carbonation is only one option in a larger portfolio of various carbon dioxide capture and storage (CCS) alternatives. Unlike many other options, the CO{sub 2} mineralisation option considered in this thesis is largely founded on the possibility to utilise the exothermic nature of magnesium carbonation and based on this notion, it has been divided into three steps. The first two steps are energy demanding, while the third step is energy 'negative', and in theory, the source of the energy required in the first two steps. Unfortunately, however, the energy demanded by the first two steps, Mg extraction and Mg(OH){sub 2} production, is (currently) much higher than what could be generated by the subsequent Mg(OH){sub 2} carbonation step. Nevertheless, opportunities to reduce the energy intensity of the process in question are still being investigated, and while an energy-neutral carbonation process might be difficult to achieve, energy requirements can still be rendered industrially acceptable (and comparable to or even better than for other CCS methods). The main focus of this thesis lies with the third step, Mg(OH){sub 2} carbonation, which is performed using a pressurised fluidised bed (PFB). The elevated CO{sub 2} pressure conditions (typically approx 20 bar) allow for the carbonation reaction to take place at higher temperatures (typically approx 500 deg C) than otherwise due to thermodynamic constraints on carbonate stability. The increase in reaction rate as a function of temperature follows the Arrhenius equation of exponential increase

Ultrafast electron transfer in all-carbon-based SWCNT-C60 donor-acceptor nanoensembles connected by poly(phenylene-ethynylene) spacers

Science.gov (United States)

Barrejón, Myriam; Gobeze, Habtom B.; Gómez-Escalonilla, María J.; Fierro, José Luis G.; Zhang, Minfang; Yudasaka, Masako; Iijima, Sumio; D'Souza, Francis; Langa, Fernando

2016-08-01

Building all-carbon based functional materials for light energy harvesting applications could be a solution to tackle and reduce environmental carbon output. However, development of such all-carbon based donor-acceptor hybrids and demonstration of photoinduced charge separation in such nanohybrids is a challenge since in these hybrids part of the carbon material should act as an electron donating or accepting photosensitizer while the second part should fulfil the role of an electron acceptor or donor. In the present work, we have successfully addressed this issue by synthesizing covalently linked all-carbon-based donor-acceptor nanoensembles using single-walled carbon nanotubes (SWCNTs) as the donor and C60 as the acceptor. The donor-acceptor entities in the nanoensembles were connected by phenylene-ethynylene spacer units to achieve better electronic communication and to vary the distance between the components. These novel SWCNT-C60 nanoensembles have been characterized by a number of techniques, including TGA, FT-IR, Raman, AFM, absorbance and electrochemical methods. The moderate number of fullerene addends present on the side-walls of the nanotubes largely preserved the electronic structure of the nanotubes. The thermodynamic feasibility of charge separation in these nanoensembles was established using spectral and electrochemical data. Finally, occurrence of ultrafast electron transfer from the excited nanotubes in these donor-acceptor nanohybrids has been established by femtosecond transient absorption studies, signifying their utility in building light energy harvesting devices.Building all-carbon based functional materials for light energy harvesting applications could be a solution to tackle and reduce environmental carbon output. However, development of such all-carbon based donor-acceptor hybrids and demonstration of photoinduced charge separation in such nanohybrids is a challenge since in these hybrids part of the carbon material should act as an

The use of barytocalcite for carbon 14 immobilization: One-year leaching behavior

Energy Technology Data Exchange (ETDEWEB)

Massoni, Nicolas, E-mail: nicolas.massoni@cea.fr; Marcou, Céline; Rosen, Jérémy; Jollivet, Patrick

2014-11-15

The spent nuclear fuel reprocessing process is one of the anthropogenic sources of carbon-14, and since this element is highly mobile in the geosphere, its sequestration is necessary. Several phases and industrial solutions to immobilize this radionuclide have been studied, including the barytocalcite phase BaCa(CO{sub 3}){sub 2} at 8.08 wt.% of C, which has many advantages such as its low specific volume of carbon. Recently, different options to synthesize this phase have been reported. Here we report on the aqueous durability of barytocalcite, studied for one year with pure water at 30 °C, in order to complete the behavior studies. Unexpected leaching behavior was encountered: it had been supposed that barytocalcite would only leach slowly, but after 1 year, it was no longer present. It appears that its simple CaCO{sub 3} and BaCO{sub 3} constituents precipitated, though the overall carbon loss was low during the period studied. This research gives a new insight into the behavior of this phase regarding carbon-14 immobilization.

Spectroscopic characterization and temporal dynamics of energy transfer process between Tm{sup 3+} -Ho{sup 3+} and Yb{sup 3+} -Tm{sup 3+} ions in LiYF{sub 4} and LiLuF{sub 4} crystals; Caracterizacao espectroscopica e dinamica temporal dos processos de transferencia de energia entre os ions Tm{sup 3+} -Ho{sup 3+} e Yb{sup 3+} -Tm{sup 3+} em cristais de LiYF{sub 4} and LiLuF{sub 4}

Energy Technology Data Exchange (ETDEWEB)

Tarelho, Luiz Vicente Gomes

2001-07-01

In this work, we perform spectroscopic studies to characterize the energy transfer processes occurring in rare-earth doped lithium fluoride systems, aiming the optimization of the population inversion of these media. Yb{sup 3+} ion was used in order to probe the electron-phonon coupling in LiYF{sub 4}, LiGdF{sub 4} and LiLuF{sub 4} matrices. In these systems it was obtained the average phononenergy, the vibronic transition probability and Huang-Rhys coupling constant. These parameters are dependent on the crystal host and the LiLuF{sub 4} system presents excluded correlation effects, an electronic repulsion that weakens the vibronic coupling. The Tm:Ho:LiYF{sub 4} system was studied under diode laser pumping at 796 nm, aiming the 2 {mu}m emission optimization. The ideal conditions of concentration and laser power were determined favouring the latter emission. Upconversion processes of two photons were identified besides the energy transfer among ions. The dynamic processes of luminescence of donors and acceptors allowed one to classify the energy transfer process as an energy transfer process assisted by fast diffusion among donors. The spectroscopic study of the Yb:Tm:LiYF{sub 4} allowed the determination of efficient non resonant transfer mechanisms between ({sup 2}F{sub 5/2}) Ytterbium level and ({sup 3}H{sub 5}) Thulium level, assisted by two phonon with hopping migration among donors ( Foerster-Burshtein model). The repopulation process of the Yb donor level is due to a cooperative sensitization between Yb-Tm pairs followed by an energy transfer process. (author)

X-ray and EPR study of reactions between B{sub 4}C and TiO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Kakazey, M. [CIICAP/FCQI, Universidad Autonoma del Estado de Morelos, Cuernavaca, Morelos (Mexico)]. E-mail: kakazey@hotmail.com; Vlasova, M. [CIICAP/FCQI, Universidad Autonoma del Estado de Morelos, Cuernavaca, Morelos (Mexico); Gonzalez-Rodriguez, J.G. [CIICAP/FCQI, Universidad Autonoma del Estado de Morelos, Cuernavaca, Morelos (Mexico); Dominguez-Patino, M. [CIICAP/FCQI, Universidad Autonoma del Estado de Morelos, Cuernavaca, Morelos (Mexico); Leder, R. [CIICAP/FCQI, Universidad Autonoma del Estado de Morelos, Cuernavaca, Morelos (Mexico)

2006-02-25

X-ray diffraction and electron paramagnetic resonance (EPR) methods have been used to study the reaction process in a system of 95 wt.% of B{sub 4}C + 5 wt.% TiO{sub 2}. The addition of TiO{sub 2} to B{sub 4}C was effective in accelerating the removal of carbon inclusions. Two types of reactions between B{sub 4}C and TiO{sub 2}, starting at temperatures {approx}1173 K, took place: (a) gas-transport exchange and (b) diffusion of Ti atoms into the B{sub 4}C lattice. These reactions modify the number and type of donor centers in the B{sub 4}C. The dependence of EPR line width on the number of donor centers in B{sub 4}C (from conditions of sample treatment) is a useful method for investigating the formation of powders and ceramics based on B{sub 4}C.

Three-dimensional core-shell Fe{sub 2}O{sub 3} @ carbon/carbon cloth as binder-free anode for the high-performance lithium-ion batteries

Energy Technology Data Exchange (ETDEWEB)

Wang, Xiaohua; Zhang, Miao [School of Materials Science and Engineering and Tianjin Key Laboratory of Composites and Functional Materials, Tianjin University, Tianjin 300350 (China); Liu, Enzuo, E-mail: ezliu@tju.edu.cn [School of Materials Science and Engineering and Tianjin Key Laboratory of Composites and Functional Materials, Tianjin University, Tianjin 300350 (China); Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300350 (China); He, Fang; Shi, Chunsheng [School of Materials Science and Engineering and Tianjin Key Laboratory of Composites and Functional Materials, Tianjin University, Tianjin 300350 (China); He, Chunnian [School of Materials Science and Engineering and Tianjin Key Laboratory of Composites and Functional Materials, Tianjin University, Tianjin 300350 (China); Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300350 (China); Li, Jiajun [School of Materials Science and Engineering and Tianjin Key Laboratory of Composites and Functional Materials, Tianjin University, Tianjin 300350 (China); Zhao, Naiqin, E-mail: nqzhao@tju.edu.cn [School of Materials Science and Engineering and Tianjin Key Laboratory of Composites and Functional Materials, Tianjin University, Tianjin 300350 (China); Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300350 (China)

2016-12-30

Highlights: • The 3D core-shell Fe{sub 2}O{sub 3}@C/CC structure is fabricated by simple hydrothermal route. • The composite connected 3D carbon networks consist of carbon cloth, Fe{sub 2}O{sub 3} nanorods and outer carbon layer. • The Fe{sub 2}O{sub 3}@C/CC used as binder-free anode in LIBs, demonstrates excellent performances. - Abstract: A facile and scalable strategy is developed to fabricate three dimensional core-shell Fe{sub 2}O{sub 3} @ carbon/carbon cloth structure by simple hydrothermal route as binder-free lithium-ion battery anode. In the unique structure, carbon coated Fe{sub 2}O{sub 3} nanorods uniformly disperse on carbon cloth which forms the conductive carbon network. The hierarchical porous Fe{sub 2}O{sub 3} nanorods in situ grown on the carbon cloth can effectively shorten the transfer paths of lithium ions and reduce the contact resistance. The carbon coating significantly inhibits pulverization of active materials during the repeated Li-ion insertion/extraction, as well as the direct exposure of Fe{sub 2}O{sub 3} to the electrolyte. Benefiting from the structural integrity and flexibility, the nanocomposites used as binder-free anode for lithium-ion batteries, demonstrate high reversible capacity and excellent cyclability. Moreover, this kind of material represents an alternative promising candidate for flexible, cost-effective, and binder-free energy storage devices.

Ionic exchange of Hf donor impurities in the wide-gap semiconductor Tm{sub 2}O{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Munoz, E.L.; Darriba, G.N. [Departamento de Fisica-IFLP (CONICET-UNLP), Facultad de Ciencias Exactas, Universidad Nacional de La Plata, C.C. 67, 1900 La Plata (Argentina); Bibiloni, A.G. [Departamento de Fisica, Facultad de Ciencias Exactas, Universidad Nacional de La Plata, C.C. 67, 1900 La Plata (Argentina); Errico, L.A. [Departamento de Fisica-IFLP (CONICET-UNLP), Facultad de Ciencias Exactas, Universidad Nacional de La Plata, C.C. 67, 1900 La Plata (Argentina); Universidad Nacional del Noroeste Bonaerense (UNNOBA), Monteagudo 2772, 2700 Pergamino, Buenos Aires (Argentina); Renteria, M., E-mail: renteria@fisica.unlp.edu.a [Departamento de Fisica-IFLP (CONICET-UNLP), Facultad de Ciencias Exactas, Universidad Nacional de La Plata, C.C. 67, 1900 La Plata (Argentina)

2010-04-16

The ionic exchange of Hf donor impurities in substitutional cationic sites of the cubic (bixbyite) phase of the wide-gap semiconductor Tm{sub 2}O{sub 3} was studied. The doping process was performed by ball-milling-assisted solid-state reaction of Tm{sub 2}O{sub 3} and neutron-activated m-HfO{sub 2}. {sup 181}Ta atoms, obtained by the {beta}-decay of the {sup 181}Hf-isotope, were used as probes in time-differential perturbed-angular-correlation (TDPAC) experiments carried out after each step of the doping process. The measured hyperfine interactions at {sup 181}Ta sites enabled the electric-field gradient (EFG) characterization at representative Hf impurity sites of each step of the process. The efficiency and substitutional character of the exchange process is discussed and elucidated in the framework of an empirical EFG systematic established in isostructural rare-earth bixbyite sesquioxides.

Magnetic core–shell Fe{sub 3}O{sub 4}@SiO{sub 2}/MWCNT nanocomposite modified carbon paste electrode for amplified electrochemical sensing of uric acid

Energy Technology Data Exchange (ETDEWEB)

Arvand, Majid, E-mail: arvand@guilan.ac.ir; Hassannezhad, Morassa

2014-03-01

A new type of nanocomposite based on multi-walled carbon nanotubes decorated with magnetic core–shell Fe{sub 3}O{sub 4}@SiO{sub 2} nanoparticles (Fe{sub 3}O{sub 4}@SiO{sub 2}/MWCNTs) was prepared and used to fabricate a modified carbon paste electrode (CPE). The nanocomposite was characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and Fourier transform infrared spectroscopy (FT-IR) techniques. Electrochemical behavior of uric acid (UA) was investigated on Fe{sub 3}O{sub 4}@SiO{sub 2}/MWCNTs-CPE by cyclic voltammetry (CV) and square wave voltammetry (SWV) in phosphate buffer solution (pH 6.0). Under the optimized conditions, the peak currents increased linearly with the concentration of UA in the range from 0.60 to 100.0 μM, with a detection limit of 0.13 μM. The proposed sensor was successfully applied for the determination of UA in biological fluids. - Highlights: • A simple and rapid sensor for determination of UA in human blood serum and urine was prepared. • The Fe{sub 3}O{sub 4}@SiO{sub 2}/MWCNTs-CPE showed an obvious increase in surface area and sensitivity. • The presence of Fe{sub 3}O{sub 4}@SiO{sub 2} nanoparticles showed good ability to distinguish the response of UA.

Identification of rhenium donors and sulfur vacancy acceptors in layered MoS{sub 2} bulk samples

Energy Technology Data Exchange (ETDEWEB)

Brandão, F. D., E-mail: fdbrand@fisica.ufmg.br; Ribeiro, G. M.; Vaz, P. H.; González, J. C.; Krambrock, K. [Departamento de Física, Universidade Federal de Minas Gerais, CP 702, 30.123-970 Belo Horizonte, MG (Brazil)

2016-06-21

MoS{sub 2} monolayers, a two-dimensional (2D) direct semiconductor material with an energy gap of 1.9 eV, offer many opportunities to be explored in different electronic devices. Defects often play dominant roles in the electronic and optical properties of semiconductor devices. However, little experimental information about intrinsic and extrinsic defects or impurities is available for this 2D system, and even for macroscopic 3D samples for which MoS{sub 2} shows an indirect bandgap of 1.3 eV. In this work, we evaluate the nature of impurities with unpaired spins using electron paramagnetic resonance (EPR) in different geological macroscopic samples. Regarding the fact that monolayers are mostly obtained from natural crystals, we expect that the majority of impurities found in macroscopic samples are also randomly present in MoS{sub 2} monolayers. By EPR at low temperatures, rhenium donors and sulfur vacancy acceptors are identified as the main impurities in bulk MoS{sub 2} with a corresponding donor concentration of about 10{sup 8–12} defects/cm{sup 2} for MoS{sub 2} monolayer. Electrical transport experiments as a function of temperature are in good agreement with the EPR results, revealing a shallow donor state with an ionization energy of 89 meV and a concentration of 7 × 10{sup 15 }cm{sup −3}, which we attribute to rhenium, as well as a second deeper donor state with ionization energy of 241 meV with high concentration of 2 × 10{sup 19 }cm{sup −3} and net acceptor concentration of 5 × 10{sup 18 }cm{sup −3} related to sulfur vacancies.

The role of carbonic anhydrase in C<sub>4sub> photosynthesis

Energy Technology Data Exchange (ETDEWEB)

Studer, Anthony [Life Sciences Research Foundation, Baltimore, MD (United States)

2015-10-01

Current pressures on the global food supply have accelerated the urgency for a second green revolution using novel and sustainable approaches to increase crop yield and efficiency. This proposal outlines experiments to address fundamental questions regarding the biology of C<sub>4sub> photosynthesis, the method of carbon fixation utilized by the most productive food, feed and bioenergy crops. Carbonic anhydrase (CA) has been implicated in multiple cellular functions including nitrogen metabolism, water use efficiency, and photosynthesis. CA catalyzes the first dedicated step in C<sub>4sub> photosynthesis, the hydration of CO<sub>2sub> into bicarbonate, and is potentially rate limiting in C<sub>4sub> grasses. Using insertional mutagenesis, we have generated CA mutants in maize, and propose the characterization of these mutants using phenotypic, physiological, and transcriptomic profiling to assay the plant’s response to altered CA activity. In addition, florescent protein tagging experiments will be employed to study the subcellular localization of CA paralogs, providing critical data for modeling carbon fixation in C<sub>4sub> plants. Finally, I propose parallel experiments in Setaria viridis to explore its relevance as model C<sub>4sub> grass. Using a multifaceted approach, this proposal addresses important questions in basic biology, as well as the need for translation research in response to looming global food challenges.

Nanomolar simultaneous determination of tryptophan and melatonin by a new ionic liquid carbon paste electrode modified with SnO{sub 2}-Co{sub 3}O{sub 4}@rGO nanocomposite

Energy Technology Data Exchange (ETDEWEB)

Zeinali, Homa [Department of Chemistry, Payame Noor University, Qazvin (Iran, Islamic Republic of); Bagheri, Hasan, E-mail: h.bagheri82@gmail.com [Chemical Injuries Research Center, Baqiyatallah University of Medical Sciences, Tehran (Iran, Islamic Republic of); Monsef-Khoshhesab, Zahra [Department of Chemistry, Payame Noor University, Qazvin (Iran, Islamic Republic of); Khoshsafar, Hosein [Department of Internal Medicine, Zabol University of Medical Sciences, Zabol (Iran, Islamic Republic of); Hajian, Ali [Laboratory for Sensors, Department of Microsystems Engineering (IMTEK), University of Freiburg, Georges Köhler Allee 103, 79110 Freiburg (Germany)

2017-02-01

This work describes the development of a new sensor for simultaneous determination of tryptophan and melatonin. The proposed sensor was an ionic liquid carbon paste electrode modified with reduced graphene oxides decorated with SnO{sub 2}-Co{sub 3}O{sub 4} nanoparticles. The voltammetric oxidation of the analytes by the proposed sensor confirmed that the electrooxidation process undergoes a two-electron/one-proton reaction for melatonin and a two-electron/two-proton reaction for tryptophan in diffusion-controlled processes. Moreover, based on the excellent electrochemical properties of the modified electrode, a sensitive voltammetric method was used for individual and simultaneous determination of melatonin and tryptophan in the aqueous solutions. Under the optimized experimental conditions, a linear response obtained in the range of 0.02 to 6.00 μmol L{sup −1} with detection limits of 4.1 and 3.2 nmol L{sup −1} for melatonin and tryptophan, respectively. The prepared sensor possessed accurate and rapid response toward melatonin and tryptophan with a good sensitivity, selectivity, stability, and repeatability. Finally, the applicability of the proposed sensor was verified by evaluation of melatonin and tryptophan in various real samples including human serum and tablet samples. - Highlights: • Ionic liquid-SnO{sub 2}-Co{sub 3}O{sub 4}@rGO nanocomposite as electrode material • This modifier can promote the electrochemical properties of carbon paste electrode. • Determination of tryptophan and melatonin was investigated.

Biomarkers related to one-carbon metabolism as potential risk factors for distal colorectal adenomas

NARCIS (Netherlands)

Vogel, S. de; Schneede, J.; Ueland, P.M.; Vollset, S.E.; Meyer, K.; Fredriksen, A.; Midttun, O.; Bjorge, T.; Kampman, E.; Bretthauer, M.; Hoff, G.

2011-01-01

BACKGROUND: Efficient one-carbon metabolism, which requires adequate supply of methyl group donors and B-vitamins, may protect against colorectal carcinogenesis. However, plasma folate and vitamins B2 and B12 have inconsistently been associated with colorectal cancer risk, and there have been no

Biomarkers Related to One-Carbon Metabolism as Potential Risk Factors for Distal Colorectal Adenomas

NARCIS (Netherlands)

Vogel, de S.; Schneede, J.; Ueland, P.M.; Vollset, S.E.; Meyer, K.; Fredriksen, A.; Midttun, O.; Bjorge, T.; Kampman, E.; Bretthauer, M.; Hoff, G.

2011-01-01

Background: Efficient one-carbon metabolism, which requires adequate supply of methyl group donors and B-vitamins, may protect against colorectal carcinogenesis. However, plasma folate and vitamins B2 and B12 have inconsistently been associated with colorectal cancer risk, and there have been no

Microwave synthesis and electrochemical characterization of mesoporous carbon@Bi{sub 2}O{sub 3} composites

Energy Technology Data Exchange (ETDEWEB)

Xia, Nannan [Department of Chemistry and Institute of Nanochemistry, Jinan University, Guangzhou 510632 (China); Yuan, Dingsheng, E-mail: tydsh@jnu.edu.cn [Department of Chemistry and Institute of Nanochemistry, Jinan University, Guangzhou 510632 (China); Zhou, Tianxiang; Chen, Jingxing; Mo, Shanshan; Liu, Yingliang [Department of Chemistry and Institute of Nanochemistry, Jinan University, Guangzhou 510632 (China)

2011-05-15

Graphical abstract: An efficient and quick microwave method has been employed to prepare worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites for the first time. The electrochemical measurement shows the worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites exhibits excellent capacitance performance and the maximum specific capacitance is up to 386 F g{sup -1}. Research highlights: {yields} An efficient and quick microwave method has been employed. {yields} A worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites have been successfully prepared. {yields} This composite exhibits excellent capacitance performance. {yields} This composite could be a potential electrode material for the supercapacitors. -- Abstract: An efficient and quick microwave method has been employed to prepare worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites for the first time. As-prepared products have been characterized by X-ray diffraction, N{sub 2} adsorption-desorption, scanning electron microscopy, transmission electron microscopy and inductive coupled plasma atomic emission spectroscopy. The electrochemical measurement shows the worm-like mesoporous carbon@Bi{sub 2}O{sub 3} composites exhibits excellent capacitance performance and the maximum specific capacitance reaches 386 F g{sup -1}, three times more than the pure worm-like mesoporous carbon.

Optimal decisions of countries with carbon tax and carbon tariff

Directory of Open Access Journals (Sweden)

Yumei Hou

2015-05-01

Full Text Available Purpose: Reducing carbon emission has been the core problem of controlling global warming and climate deterioration recently. This paper focuses on the optimal carbon taxation policy levied by countries and the impact on firms’ optimal production decisions. Design/methodology/approach: This paper uses a two-stage game theory model to analyze the impact of carbon tariff and tax. Numerical simulation is used to supplement the theoretical analysis. Findings: Results derived from the paper indicate that the demand in an unstable market is significantly affected by environmental damage level. Carbon tariff is a policy-oriented tax while the carbon tax is a market-oriented one. Comprehensive carbon taxation policy benefit developed countries and basic policy is more suitable for developing countries. Research limitations/implications: In this research, we do not consider random demand and asymmetric information, which may not well suited the reality. Originality/value: This work provides a different perspective in analyzing the impact of carbon tax and tariff. It is the first study to consider two consuming market and the strategic game between two countries. Different international status of countries considered in the paper is also a unique point.

Controllable synthesis of Zn{sub 2}TiO{sub 4}-carbon core/shell nanofibers with high photocatalytic performance

Energy Technology Data Exchange (ETDEWEB)

Zhang, Peng [Center for Advanced Optoelectronic Functional Materials Research, and Key Laboratory of UV Light-Emitting Materials and Technology of Ministry of Education, Northeast Normal University, 5268 Renmin Street, Changchun 130024 (China); Shao, Changlu, E-mail: clshao@nenu.edu.cn [Center for Advanced Optoelectronic Functional Materials Research, and Key Laboratory of UV Light-Emitting Materials and Technology of Ministry of Education, Northeast Normal University, 5268 Renmin Street, Changchun 130024 (China); Zhang, Mingyi; Guo, Zengcai; Mu, Jingbo; Zhang, Zhenyi; Zhang, Xin; Liang, Pingping; Liu, Yichun [Center for Advanced Optoelectronic Functional Materials Research, and Key Laboratory of UV Light-Emitting Materials and Technology of Ministry of Education, Northeast Normal University, 5268 Renmin Street, Changchun 130024 (China)

2012-08-30

Graphical abstract: We describe a controllable route to synthesize Zn{sub 2}TiO{sub 4}-carbon core/shell nanofibers with different thickness of carbon layers (from 2 to 8 nm) as high efficiency photocatalysts. Highlights: Black-Right-Pointing-Pointer Synthesis of Zn{sub 2}TiO{sub 4}-carbon nanofibers with different thickness of carbon layers. Black-Right-Pointing-Pointer Zn{sub 2}TiO{sub 4}-carbon NFs showed photocatalytic activity for the degradation of Rhodamine B. Black-Right-Pointing-Pointer Easy photocatalyst separation and reuse. Black-Right-Pointing-Pointer A general way to fabricate other carbon-coated core/shell photocatalysts. - Abstract: Zn{sub 2}TiO{sub 4}-carbon core/shell nanofibers (Zn{sub 2}TiO{sub 4}-C NFs) with different thickness of carbon layers (from 2 to 8 nm) were fabricated by combining the electrospinning technique and hydrothermal method. The results showed that a uniform carbon layer was formed around the electrospun Zn{sub 2}TiO{sub 4} nanofiber (Zn{sub 2}TiO{sub 4} NFs). By adjusting the hydrothermal fabrication parameters, the thickness of carbon layer varied linearly with the concentration of glucose. Furthermore, the core/shell structure formed between Zn{sub 2}TiO{sub 4} and carbon enhanced the charge separation of pure Zn{sub 2}TiO{sub 4} under ultraviolet excitation, as evidenced by photoluminescence spectra. The photocatalytic studies revealed that the Zn{sub 2}TiO{sub 4}-C NFs exhibited enhanced photocatalytic efficiency of photodegradation of Rhodamine B (RB) compared with the pure Zn{sub 2}TiO{sub 4} NFs under ultraviolet excitation, which might be attributed to the high separation efficiency of photogenerated electrons and holes based on the synergistic effect between carbon and Zn{sub 2}TiO{sub 4}. Notably, the Zn{sub 2}TiO{sub 4}-C NFs could be recycled easily by sedimentation without a decrease of the photocatalytic activity.

Facile one-pot synthesis of CoS{sub 2}-MoS{sub 2}/CNTs as efficient electrocatalyst for hydrogen evolution reaction

Energy Technology Data Exchange (ETDEWEB)

Liu, Yan-Ru; Hu, Wen-Hui; Li, Xiao [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); Dong, Bin, E-mail: dongbin@upc.edu.cn [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); College of Science, China University of Petroleum (East China), Qingdao 266580 (China); Shang, Xiao [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); Han, Guan-Qun [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); College of Science, China University of Petroleum (East China), Qingdao 266580 (China); Chai, Yong-Ming [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); Liu, Yun-Qi, E-mail: liuyq@upc.edu.cn [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China); Liu, Chen-Guang [State Key Laboratory of Heavy Oil Processing, China University of Petroleum (East China), Qingdao 266580 (China)

2016-10-30

Highlights: • Ternary hybrid CoS{sub 2}-MoS{sub 2}/CNTs electrocatalysts have been prepared. • CNTs as support may provide good conductivity and low the agglomeration of MoS{sub 2}. • CoS{sub 2} with intrinsic metallic conductivity may enhance the activity for HER. • Ternary CoS{sub 2}-MoS{sub 2}/CNTs have the better activity and stability for HER. - Abstract: Ternary hybrid cobalt disulfide-molybdenum disulfides supported on carbon nanotubes (CoS{sub 2}-MoS{sub 2}/CNTs) electrocatalysts have been prepared via a simple hydrothermal method. CNTs as support may provide good conductivity and low the agglomeration of layered MoS{sub 2} structure. CoS{sub 2} with intrinsic metallic conductivity may enhance the activity of the ternary hybrid electrocatalysts for hydrogen evolution reaction (HER). X-ray diffraction (XRD) data confirm the formation of ternary hybrid nanocomposites composed of CNTs, CoS{sub 2} and amorphous MoS{sub 2}. Scanning electron microscopy (SEM) images show that strong combination between MoS{sub 2}, CNTs and regular orthohexagonal CoS{sub 2} has been obtained. The dispersion of each component is good and no obvious agglomeration can be observed. It is found that compared with CoS{sub 2}/CNTs and MoS{sub 2}/CNTs, the ternary CoS{sub 2}-MoS{sub 2}/CNTs have the better activity for HER with a low onset potential of 70 mV (vs. RHE) and a small Talel slope of 67 mV dec{sup −1}, and are extremely stable after 1000 cycles. In addition, the optimal doping ratio of Co to Mo is 2:1, which have better HER activity. It is proved that the introduction of carbon materials and Co atoms could improve the performances of MoS{sub 2}-based electrocatalysts for HER.

One-step solution combustion synthesis of Fe{sub 2}O{sub 3}/C nano-composites as anode materials for lithium ion batteries

Energy Technology Data Exchange (ETDEWEB)

Li, Peiyang; Deng, Jiachun; Li, Ying [Nano-Energy Inorganic Materials Laboratory, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); Liang, Wei, E-mail: liangwei@tyut.edu.cn [Nano-Energy Inorganic Materials Laboratory, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); Wang, Kun [Nano-Energy Inorganic Materials Laboratory, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); Kang, Litao, E-mail: kangltxy@gmail.com [Nano-Energy Inorganic Materials Laboratory, College of Materials Science and Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); Zeng, Shaozhong; Yin, Shanhui; Zhao, Zhigang [Chery Automobile Co. Ltd., Wuhu 241006 (China); Liu, Xuguang; Yang, Yongzhen [College of Chemistry and Chemical Engineering, Taiyuan University of Technology, Taiyuan 030024 (China); Gao, Feng [State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan 030001 (China)

2014-03-25

Highlights: • Fe{sub 2}O{sub 3}/C composite anode materials were prepared by a solution combustion process. • The carbon content could be adjusted by regulating the ratio of oxidizer/fuel. • The Fe{sub 2}O{sub 3}/C composite showed capacity 470 mA h g{sup −1} at the 80th cycle at 125 mA g{sup −1}. -- Abstract: This article describes a one-step solution combustion route (within 30 min at 350 °C in air) to prepare Fe{sub 2}O{sub 3} anode materials for lithium ion batteries (LIBs) from Fe(NO{sub 3}){sub 3}⋅9H{sub 2}O solution with citric acid. XRD, SEM-EDX and TEM showed that the product consisted a mixture of nano-sized α-Fe{sub 2}O{sub 3} and γ-Fe{sub 2}O{sub 3} crystals that agglomerated into porous particles. Significantly, in situ formed carbon could be introduced into the product (i.e., Fe{sub 2}O{sub 3}/C nano-composites) by simply increasing the dosage of citric acid in the precursor solution. The as-prepared Fe{sub 2}O{sub 3}/C nano-composite exhibited high reversible capacities of 470 and 419 mA h g{sup −1} at the 80th and 200th cycles with a current density of 125 mA g{sup −1}, which are much higher than those of counterparts without carbon (i.e., Fe{sub 2}O{sub 3} nano-particles). Comparison experiments correlated with the performance improvement of Fe{sub 2}O{sub 3}/C nano-composites with in situ formed carbon, well-developed mesopores and relatively high specific surface areas.

Molecular designing of novel ternary copolymers of donor-acceptor polymers using genetic algorithm

Energy Technology Data Exchange (ETDEWEB)

Arora, Vinita [Department of Chemistry, University of Delhi, Delhi 110 007 (India); Bakhshi, A.K., E-mail: akbakhshi2000@yahoo.com [Department of Chemistry, University of Delhi, Delhi 110 007 (India)

2010-08-03

Graphical abstract: Alternate arrangement of donor acceptor moieties in the carbon backbone chain of an organic conjugated polymer is capable of inducing charge transfer and affects the electronic properties of the copolymer. Genetic algorithm along with simple NFC (negative factor counting) and IIM (inverse iteration method) has been used to optimize the properties of novel ternary copolymers based on polypyrrole PPy, polythiophene PTh and polyfuran PFu (as donor moieties) and containing >C=O and >C=CF{sub 2} bridging units as acceptor moieties. - Abstract: An efficient designing route to novel ternary copolymers consisting of polypyrrole (PPy), polythiophene (PTh) and polyfuran (PFu) is developed with the help of genetic algorithm. Using the band structure results obtained from ab initio crystal orbital (CO) calculations, the electronic structures and conduction properties of real ternary copolymers based on donor acceptor type polymers are investigated. The electron rich heterocyclic rings in the backbone chain of the copolymer are joined together by electron withdrawing groups Y, carbonyl group (>C=O) and difluoromethylene group (>C=CF{sub 2}) in an attempt to design the conducting polymer with lowest band gap. A comparative study of various electronic properties is presented. The effects of substitution on the behaviour and properties of the copolymers as well as on the density of states (DOS) are discussed. Band gap decreases as a result of substitution on the polymer backbone chain due to decrease in ionization potential and increase in electron affinity values. This is expected to enhance the intrinsic conductivity of the resulting copolymer. Use of alternate donor acceptor moieties within the repeat units should maximize the extended {pi} conjugation.

Blood donors' perceptions, motivators and deterrents in Sub-Saharan Africa - a scoping review of evidence

DEFF Research Database (Denmark)

Asamoah-Akuoko, Lucy; Hassall, Oliver W; Bates, Imelda

2017-01-01

Achieving an adequate blood supply in Sub-Saharan Africa (SSA) through donor mobilization and retention is crucial. Factors that motivate or deter blood donors vary according to beliefs and social norms. Understanding the factors that influence blood donation behaviour in SSA is vital to developing...... effective strategies to address blood donor motivation and retention. This review of 35 studies from 16 SSA countries collates available evidence concerning the perceptions, motivators and deterrents that influence blood donors in SSA. The review revealed a common understanding that blood and blood donation...... save lives. The main deterrent to blood donation was fear due to lack of knowledge and discouraging spiritual, religious and cultural perceptions of blood donation. The main motivators for blood donation were altruism, donating blood for family and incentives. The findings support the need for targeted...

Sulfation of CaO particles in a carbonation/calcination loop to capture CO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Grasa, G.S.; Alonso, M.; Abanades, J.C. [CSIC, Zaragoza (Spain)

2008-03-15

CaO is being proposed as a regenerable sorbent of CO{sub 2} via a carbonation/calcination loop. It is well known that natural sorbents lose their capacity to capture CO{sub 2} with the number of cycles due to textural degradation. In coal combustion systems, reaction with the SO{sub 2} present in flue gases also causes sorbent deactivation. This work investigates the effect of partial sorbent sulfation on the amount of CaO used in systems where both carbonation and sulfation reactions are competing. We have found that SO{sub 2} reacts with the deactivated CaO resulting from repetitive calcination/carbonation reactions. Therefore, the deactivation of CaO as a result of the presence of SO{sub 2} is lower than one would expect if one assumes that SO{sub 2} reacts only with active CaO. This work shows that changes in the texture of the sorbent due to repetitive carbonation/calcination cycles tend to increase the sulfation capacity of the sorbents tested. This suggests that the purge of deactivated CaO obtained from a CO{sub 2} capture loop could be a more effective sorbent of SO{sub 2} than fresh CaO.

New α-Zn{sub 2}V{sub 2}O{sub 7}/carbon nanotube nanocomposite for supercapacitors

Energy Technology Data Exchange (ETDEWEB)

Venugopal, Nulu; Kim, Woo-Sik [Kyung Hee University, Yongin (Korea, Republic of)

2015-09-15

This study synthesized α-Zn{sub 2}V{sub 2}O{sub 7} nanopowders using a hydrothermal approach followed by annealing treatment. The resulting powders were then mixed with multi-walled carbon nanotubes and electrochemically characterized as new nanocomposite electrodes for supercapacitors. The structure and surface morphology of the powders were characterized by X-ray diffraction, transmission electron microscopy, and scanning electron microscopy. Plus, the capacitive behavior of the composite electrodes was evaluated by cyclic voltammetry and galvanostatic charge-discharge cycles in different molar aqueous KCl solutions. The α-Zn{sub 2}V{sub 2}O{sub 7}/multi-walled carbon nanotube composite electrodes were prepared using three different ratios and screened for their use in supercapacitors. As a result, the α-Zn{sub 2}V{sub 2}O{sub 7}/ multi-walled carbon nanotube composite electrode with a 1 : 2 ratio was identified as the best electrode with a specific capacitance value of 44.8 F g{sup -1} in 0.5M KCl. Notwithstanding, all the tested composite electrodes demonstrated an excellent cycle stability and showed a less than 4% change in their specific capacitance values when compared to the initial values.

Fabrication and characterization of mesoporous activated carbon from Lemna minor using one-step H{sub 3}PO{sub 4} activation for Pb(II) removal

Energy Technology Data Exchange (ETDEWEB)

Huang, Yang, E-mail: zzsfxyhy@163.com; Li, Shunxing; Lin, Haibin; Chen, Jianhua

2014-10-30

Graphical abstract: - Highlights: • Activated carbon was prepared from Lemna minor using H{sub 3}PO{sub 4} activation. • Materials have higher mesoporosity (92.2%) and more oxygen and nitrogen-containing functional groups. • Materials can remove Pb(II) rapidly with monolayer adsorption capacity (170.9 mg/g). • The adsorption process fitted to Langmuir isotherm and pseudo-first-order kinetic. • Materials could be used as an economical, efficient adsorbent to remove Pb(II) ions. - Abstract: A low cost and locally available material, Lemna minor, was used to fabricate activated carbon using H{sub 3}PO{sub 4} activation. After H{sub 3}PO{sub 4} activation, the L. minor activated carbons (LACs) possess high mesoporosity (92.2%) and a surface area of 531.9 m{sup 2}/g according to Brunauer–Emmett–Teller (BET) analysis. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectrometer (XPS) analyses reveal the presence of rich hydroxyl, carboxyl, amide and phosphate functional groups on the LACs surface, leading to facile Pb(II) binding to the surface through strong chemisorptive bonds or ion-exchange. The kinetic and equilibrium data were well described by pseudo-first-order model and Langmuir isotherm, with the maximum monolayer adsorption capacity (q{sub m}) 170.9 mg/g at 25 °C. The intra-particle diffusion mechanism was partially responsible for the adsorption. The adsorption process was spontaneous and endothermic with negative ΔG and positive ΔH. The Pb(II)-loaded LACs could be easily regenerated using 0.1-M HCl and reused for seven cycles without significant adsorption capacity reduction. The maximum percentage removal rate for Pb(II) (20 mg/L) was found to be 91.8% within 30 min, at optimum conditions of pH 6.0 and 25 °C. These suggested that the low-cost LACs could be used as a potential adsorbent in the treatment of lead-contaminated water.

Evidence for CO<sub>2sub> reactive adsorption on nanoporous S- and N-doped carbon at ambient conditions

Energy Technology Data Exchange (ETDEWEB)

Bandosz, Teresa J. [City College of New York, NY (United States). Dept. of Chemistry; Seredych, Mykola [City College of New York, NY (United States). Dept. of Chemistry; Rodríguez-Castellón, Enrique [Univ. of Malaga (Spain). Dept. of Inorganic Chemistry; Cheng, Yongqiang [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Chemical and Engineering Materials Division; Daemen, Luke L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Chemical and Engineering Materials Division; Ramírez-Cuesta, Anibal J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Chemical and Engineering Materials Division

2015-10-08

CO<sub>2sub> interactions with nanoporous S- and N-doped polymer-derived carbon and commercial wood-based carbon were investigated in a broad range of conditions. The results showed that during CO<sub>2sub> adsorption nitrogen and sulfur species as well as water were released from the carbon surface as a result of chemical reactions of the surface groups with CO<sub>2sub>. Inelastic neutron scattering experiments provided the unprecedented ability to characterize very small amounts of CO<sub>2sub> and H<sub>2sub>O and revealed for the first time their physical/chemical status in the confined space of nanoporous carbons. The results obtained suggest that the reactivity of the carbon surface should be considered when CO<sub>2sub> storage media are chosen and when CO<sub>2sub> is used as a probe to determine the microporosity of carbon materials.

Magnetic solid phase extraction of brominated flame retardants and pentachlorophenol from environmental waters with carbon doped Fe{sub 3}O{sub 4} nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Yang, Jing [State Key Laboratory of Analytical Chemistry for Life Science, School of Chemistry and Chemical Engineering and Center of Materials Analysis, Nanjing University, 22 Hankou Road, Nanjing 210093 (China); Jiangsu Collaborative Innovation Center of Biomedical Functional Materials, Jiangsu Key Laboratory of Biomedical Materials, College of Chemistry and Materials Science, Nanjing Normal University, 1 Wenyuan Road, Nanjing 210023 (China); Li, Jia-yuan; Qiao, Jun-qin [State Key Laboratory of Analytical Chemistry for Life Science, School of Chemistry and Chemical Engineering and Center of Materials Analysis, Nanjing University, 22 Hankou Road, Nanjing 210093 (China); Cui, Shi-hai [Jiangsu Collaborative Innovation Center of Biomedical Functional Materials, Jiangsu Key Laboratory of Biomedical Materials, College of Chemistry and Materials Science, Nanjing Normal University, 1 Wenyuan Road, Nanjing 210023 (China); Lian, Hong-zhen, E-mail: hzlian@nju.edu.cn [State Key Laboratory of Analytical Chemistry for Life Science, School of Chemistry and Chemical Engineering and Center of Materials Analysis, Nanjing University, 22 Hankou Road, Nanjing 210093 (China); Chen, Hong-yuan [State Key Laboratory of Analytical Chemistry for Life Science, School of Chemistry and Chemical Engineering and Center of Materials Analysis, Nanjing University, 22 Hankou Road, Nanjing 210093 (China)

2014-12-01

Graphical abstract: - Highlights: • Magnetic Fe{sub 3}O{sub 4}/C nanospheres were used in MSPE of BFRs and PCP from water samples. • The method shows merits of simpleness, reliableness and environmental friendliness. • The bonding between Fe{sub 3}O{sub 4} and coated organic carbon has been demonstrated in Fe{sub 3}O{sub 4}/C. • The straight influences of synthesis conditions of Fe{sub 3}O{sub 4}/C on MSPE were investigated. • The extraction characteristics of Fe{sub 3}O{sub 4}/C nanoparticles were further elucidated. - Abstract: Carbon doped Fe{sub 3}O{sub 4} nanoparticles (Fe{sub 3}O{sub 4}/C) prepared by a facile hydrothermal reaction of glucose with iron resource have been applied as magnetic solid-phase extraction (MSPE) sorbent, for the first time, to extract trace brominated flame retardants (BFRs) and pentachlorophenol (PCP) from environmental waters. Various MSPE parameters were optimized including amount of Fe{sub 3}O{sub 4}/C nanoparticles, pH of sample solution, enrichment factor of analytes and reusability of Fe{sub 3}O{sub 4}/C sorbent. The reliability of the MSPE method was evaluated by the recoveries of BFRs and PCP in spiked water samples. Good recoveries (80.0–110.0%) were achieved with the relative standard deviations range from 0.3% to 6.8%. In this paper, the extraction characteristics of Fe{sub 3}O{sub 4}/C sorbent were further elucidated. It is found that the adsorption process of Fe{sub 3}O{sub 4}/C to analytes predominates the MSPE efficiency. There is hybrid hydrophobic interaction and hydrogen bonding or dipole–dipole attraction between Fe{sub 3}O{sub 4}/C and analytes. Notably, the chemical components of carbon layer on the surface of Fe{sub 3}O{sub 4} nanoparticles were identified by X-ray photoelectron spectroscopy and thermogravimetry-mass spectrometry, and in consequence the covalent bonds between Fe{sub 3}O{sub 4} and the coated carbon have been observed. In addition, the straight influence of synthesis condition of Fe{sub

LiPF{sub 6}. Synthesis and stability in EC/DMC and PC/DMC mixtures; LiPF{sub 6}. Synthese et stabilite dans les melanges EC/DMC et PC/DMC

Energy Technology Data Exchange (ETDEWEB)

Naejus, R.; Coudert, R.; Lemordant, D. [Laboratoire P.I.M.I.R. EA, Sciences et Techniques, 37 - Tours (France); Willmann, P. [CNES, 31 - Toulouse (France)

1996-12-31

Lithium hexa-fluoro-phosphate LiPF{sub 6} is recommended for the replacement of the toxic LiAsF{sub 6} and the explosive perchlorates (like LiClO{sub 4}) in rechargeable lithium electrochemical generators. The aim of this work is to develop a new method of synthesis of this salt and to check its stability with respect to carbonated solvents: ethylene carbonate (EC), propylene carbonate (PC) and dimethyl-carbonate (DMC) in already optimized EC/DMC and PC/DMC binary mixtures. Two methods using HPF{sub 6} are proposed: the first one uses the direct neutralization of this commercial acid by LiOH in aqueous, alcoholic or acetonitrile environment, while in the second one LiPF{sub 6} is obtained from pyridinium hexa-fluoro-phosphate synthesized from HPF{sub 6} using a new and simple protocol. (J.S.) 24 refs.

LiPF{sub 6}. Synthesis and stability in EC/DMC and PC/DMC mixtures; LiPF{sub 6}. Synthese et stabilite dans les melanges EC/DMC et PC/DMC

Energy Technology Data Exchange (ETDEWEB)

Naejus, R; Coudert, R; Lemordant, D [Laboratoire P.I.M.I.R. EA, Sciences et Techniques, 37 - Tours (France); Willmann, P [CNES, 31 - Toulouse (France)

1997-12-31

Lithium hexa-fluoro-phosphate LiPF{sub 6} is recommended for the replacement of the toxic LiAsF{sub 6} and the explosive perchlorates (like LiClO{sub 4}) in rechargeable lithium electrochemical generators. The aim of this work is to develop a new method of synthesis of this salt and to check its stability with respect to carbonated solvents: ethylene carbonate (EC), propylene carbonate (PC) and dimethyl-carbonate (DMC) in already optimized EC/DMC and PC/DMC binary mixtures. Two methods using HPF{sub 6} are proposed: the first one uses the direct neutralization of this commercial acid by LiOH in aqueous, alcoholic or acetonitrile environment, while in the second one LiPF{sub 6} is obtained from pyridinium hexa-fluoro-phosphate synthesized from HPF{sub 6} using a new and simple protocol. (J.S.) 24 refs.

C{sub 60} fullerene decoration of carbon nanotubes

Energy Technology Data Exchange (ETDEWEB)

Demin, V. A., E-mail: victordemin88@gmail.com [Russian Academy of Sciences, Emanuel Institute of Biochemical Physics (Russian Federation); Blank, V. D.; Karaeva, A. R.; Kulnitskiy, B. A.; Mordkovich, V. Z. [Technological Institute for Superhard and Novel Carbon Materials (Russian Federation); Parkhomenko, Yu. N. [National University of Science and Technology MISiS (Russian Federation); Perezhogin, I. A.; Popov, M. Yu. [Technological Institute for Superhard and Novel Carbon Materials (Russian Federation); Skryleva, E. A. [National University of Science and Technology MISiS (Russian Federation); Urvanov, S. A. [Technological Institute for Superhard and Novel Carbon Materials (Russian Federation); Chernozatonskii, L. A. [Russian Academy of Sciences, Emanuel Institute of Biochemical Physics (Russian Federation)

2016-12-15

A new fully carbon nanocomposite material is synthesized by the immersion of carbon nanotubes in a fullerene solution in carbon disulfide. The presence of a dense layer of fullerene molecules on the outer nanotube surface is demonstrated by TEM and XPS. Fullerenes are redistributed on the nanotube surface during a long-term action of an electron beam, which points to the existence of a molecular bond between a nanotube and fullerenes. Theoretical calculations show that the formation of a fullerene shell begins with the attachment of one C{sub 60} molecule to a defect on the nanotube surface.

Effect of magnetic field on the donor impurity in CdTe/Cd{sub 1-x}Mn{sub x}Te quantum well wire

Energy Technology Data Exchange (ETDEWEB)

Kalpana, P.; Nithiananthi, P.; Jayakumar, K., E-mail: kjkumar-gri@rediffmail.com [Nanostructure Lab, Department of Physics, Gandhigram Rural University, Gandhigram – 624 302, Tamilnadu (India); Reuben, A. Merwyn Jasper D. [Department of Physics, School of Engineering, Saveetha University, Thandalam, Chennai-600104, TamilNadu (India)

2016-05-23

The donor impurity binding energy in CdTe / Cd{sub 1-x}Mn{sub x}Te QWW with square well confinement along x – direction and parabolic confinement along y – direction under the influence of externally applied magnetic field has been computed using variational principle in the effective mass approximation. The spin polaronic shift has also been computed. The results are presented and discussed.

Corrosion resistance of ZrO{sub 2}–TiO{sub 2} nanocomposite multilayer thin films coated on carbon steel in hydrochloric acid solution

Energy Technology Data Exchange (ETDEWEB)

Abd El-Lateef, Hany M., E-mail: Hany_shubra@yahoo.co.uk; Khalaf, Mai M., E-mail: Mai_kha1@yahoo.com

2015-10-15

This work reports the achievement of preparing of x% zirconia (ZrO{sub 2})–titania (TiO{sub 2}) composite coatings with different ZrO{sub 2} percent on the carbon steel by dipping substrates in sol–gel solutions. The prepared coated samples were investigated by various surface techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDAX). Open-circuit potential (OCP), potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) methods were employed to investigate the corrosion resistance of the coated carbon steel substrates in 1.0 M HCl solution at 50 °C. The data showed that, the corrosion protection property is not always proportional to the percent of ZrO{sub 2}. It can be inferred that there is an optimum percent (10%ZrO{sub 2}) for beneficial effects of loading ZrO{sub 2} on the protection efficiency (98.70%), while higher loading percent of ZrO{sub 2} in the sol–gel coating leads to the formation of a fragile film with poor barrier properties. EDAX/SEM suggests that the metal surface was protected through coating with ZrO{sub 2}–TiO{sub 2} composite films. - Highlights: • Sol–gel TiO{sub 2} doped with ZrO{sub 2} films deposited on carbon steel substrate • XRD measurements of x wt.% ZrO{sub 2}–TiO{sub 2} showed the (101) peaks broader than that of TiO{sub 2}. • SEM results proved that, the cracking decreases with the number of layers. • The prepared films can improve the corrosion resistance of the carbon steel substrate. • 10%ZrO{sub 2} loading is the optimal percent for useful effects on the corrosion resistance.

CO{sub 2} capture using some fly ash-derived carbon materials

Energy Technology Data Exchange (ETDEWEB)

A. Arenillas; K.M. Smith; T.C. Drage; C.E. Snape [University of Nottingham, Nottingham (United Kingdom). Nottingham Fuel and Energy Centre, School of Chemical, Environmental and Mining Engineering

2005-12-01

Adsorption is considered to be one of the more promising technologies for capturing CO{sub 2} from flue gases. For post-combustion capture, the success of such an approach is however dependent on the development of an adsorbent that can operate competitively at relatively high temperatures. In this work, low cost carbon materials derived from fly ash, are presented as effective CO{sub 2} sorbents through impregnation these with organic bases, for example, polyethylenimine aided by polyethylene glycol. The results show that for samples derived from a fly ash carbon concentrate, the CO{sub 2} adsorption capacities were relatively high (up to 4.5 wt%) especially at high temperatures (75{sup o}C), where commercial active carbons relying on physi-sorption have low capacities. The addition of PEG improves the adsorption capacity and reduces the time taken for the sample to reach the equilibrium. No CO{sub 2} seems to remain after desorption, suggesting that the process is fully reversible. 24 refs., 6 figs., 2 tabs.

Electrochemical preparation of carbon films with a Mo{sub 2}C interlayer in LiCl-NaCl-Na{sub 2}CO{sub 3} melts

Energy Technology Data Exchange (ETDEWEB)

Ge, Jianbang; Wang, Shuai; Zhang, Feng; Zhang, Long; Jiao, Handong [State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing, 100083 (China); Zhu, Hongmin [Department of Metallurgy, Materials Science, and Materials Processing, Tohoku University, Sendai 980-8579 (Japan); Jiao, Shuqiang, E-mail: sjiao@ustb.edu.cn [State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing, 100083 (China)

2015-08-30

Highlights: • The electrodeposition of carbon films with a Mo{sub 2}C interlayer. • Carbon diffusion engenders the formation of Mo{sub 2}C interlayer. • The Mo{sub 2}C interlayer has a good adhesion. - Abstract: The electrodeposition of carbon films with a Mo{sub 2}C interlayer was investigated in LiCl-NaCl-Na{sub 2}CO{sub 3} melts at 900 °C. Cyclic voltammetry was applied to study the electrochemical reaction mechanism on Mo and Pt electrodes, indicating that, two reduction reactions including carbon deposition and carbon monoxide evolution, may take place on the two electrodes simultaneously during the cathodic sweep. Carbon films with a continuous Mo{sub 2}C interlayer were prepared by constant voltage electrolysis, showing a good adhesion between Mo substrate and carbon films. The carbon films with a Mo{sub 2}C interlayer were characterized using X-ray diffraction measurement, Raman spectroscopy, scanning electron microscopy and transmission electron microscopy. The results reveal that carbon materials deposited on the electrodes are mainly composed of graphite and carbon diffusion in Mo (or Mo{sub 2}C) leads to the formation and growth of Mo{sub 2}C interlayer.

Pt/Al/sub 2/O/sub 3/- carbon nanocomposite as a catalyst for fuel cells

International Nuclear Information System (INIS)

Naeem, R.; Ahmed, R.; Ansari, M.S.

2013-01-01

Catalysts comprising platinum nanoparticles (Pt NPs) on carbon support are used in fuel cells for the hydrogen and electricity production by electrochemical oxidation of methanol. However, the catalyst is not the best in terms of its performance. Considering role of the support as significant towards efficiency and durability of the catalyst, there is need for introducing novel support materials to replace carbon alone. Deposition of various metallic NPs on ceramic-carbon (hybrid) supports has been reported to improve thermal, mechanical, electrical and chemical properties of different types of catalyst. In search of better performing catalysts for proton exchange membrane fuel cells (PEMFCs), hybrid supports having different ceramic materials should be synthesized. In this regard Pt/Al/sub 2/O/sub 3/-Carbon (nanocomposites) have been synthesized and applied as promising catalysts in the PEMFCs; results obtained for the nanocomposites were compared with Pt/carbon and Pt/Al/sub 2/O/sub 3/. Vulcan carbon was purified and functionalized prior to use; presence of oxygen containing functional groups on carbon was established from the FTIR spectrum, Hybrid support (1:8 by weight ratio of ceramic and carbon) were already prepared in aqueous 2-propanol employing sonication method on to which Pt NPs (10% by weight in all the cases) were deposited by simple chemical reduction of PtCl/sub 4/ by NaBH/sub 4/ under controlled conditions. The catalysts were subjected to various characterization techniques like TGA (for thermal stability), EDX (for chemical composition), SEM (for surface morphology) and XRD (for cell-shape and -volume, material density and average crystalline size). Catalysts efficiencies for the methanol oxidation were investigated through cyclic voltammetery (CV) by comparing electrochemical surface area, peak current, exchange current density and rate constant in the acidic and basic media. Pt/Al/sub 2/O/sub 3/-carbon exhibited better catalytic efficiencies

High thermoelectric potential of Bi{sub 2}Te{sub 3} alloyed GeTe-rich phases

Energy Technology Data Exchange (ETDEWEB)

Madar, Naor; Givon, Tom; Mogilyansky, Dmitry; Gelbstein, Yaniv [Department of Materials Engineering, Ben-Gurion University of the Negev, Beer-Sheva (Israel)

2016-07-21

In an attempt to reduce our reliance on fossil fuels, associated with severe environmental effects, the current research is focused on the identification of the thermoelectric potential of p-type (GeTe){sub 1−x}(Bi{sub 2}Te{sub 3}){sub x} alloys, with x values of up to 20%. Higher solubility limit of Bi{sub 2}Te{sub 3} in GeTe, than previously reported, was identified around ∼9%, extending the doping potential of GeTe by the Bi{sub 2}Te{sub 3} donor dopant, for an effective compensation of the high inherent hole concentration of GeTe toward thermoelectrically optimal values. Around the solubility limit of 9%, an electronic optimization resulted in an impressive maximal thermoelectric figure of merit, ZT, of ∼1.55 at ∼410 °C, which is one of the highest ever reported for any p-type GeTe-rich alloys. Beyond the solubility limit, a Fermi Level Pinning effect of stabilizing the Seebeck coefficient was observed in the x = 12%–17% range, leading to stabilization of the maximal ZTs over an extended temperature range; an effect that was associated with the potential of the governed highly symmetric Ge{sub 8}Bi{sub 2}Te{sub 11} and Ge{sub 4}Bi{sub 2}Te{sub 7} phases to create high valence band degeneracy with several bands and multiple hole pockets on the Fermi surface. At this compositional range, co-doping with additional dopants, creating shallow impurity levels (in contrast to the deep lying level created by Bi{sub 2}Te{sub 3}), was suggested for further electronic optimization of the thermoelectric properties.

The performance of Pt nanoparticles supported on Sb{sub 2}O{sub 5}.SnO{sub 2}, on carbon and on physical mixtures of Sb{sub 2}O{sub 5}.SnO{sub 2} and carbon for ethanol electro-oxidation

Energy Technology Data Exchange (ETDEWEB)

Oliveira Neto, A.; Brandalise, M.; Dias, R.R.; Ayoub, J.M.S.; Silva, A.C.; Penteado, J.C.; Linardi, M.; Spinace, E.V. [Instituto de Pesquisas Energeticas e Nucleares, IPEN - CNEN/SP, Av. Prof. Lineu Prestes, 2242 - Cidade Universitaria - CEP 05508-900 Sao Paulo, SP (Brazil)

2010-09-15

Pt nanoparticles were supported on Sb{sub 2}O{sub 5}.SnO{sub 2} (ATO), on carbon and on physical mixtures of ATO and carbon by an alcohol-reduction process using ethylene glycol as reducing agent. The obtained materials were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Their performance for ethanol oxidation was investigated at room temperature by chronoamperometry and in a direct ethanol fuel cell (DEFC) at 100 C. Pt nanoparticles supported on a physical mixture of ATO and carbon showed a significant increase of performance for ethanol oxidation compared to Pt nanoparticles supported on ATO or on carbon. (author)

Preparation of La{sub 0.75}Sr{sub 0.25}Cr{sub 0.5}Mn{sub 0.5}O{sub 3-{delta}} fine powders by carbonate coprecipitation for solid oxide fuel cells

Energy Technology Data Exchange (ETDEWEB)

Ha, Sang Bu; Cho, Pyeong-Seok; Cho, Yoon Ho; Lee, Dokyol; Lee, Jong-Heun [Department of Materials Science and Engineering, Korea University, Anam-dong, Sungbuk-ku, Seoul 136-713 (Korea)

2010-01-01

A range of La{sub 0.75}Sr{sub 0.25}Cr{sub 0.5}Mn{sub 0.5}O{sub 3-{delta}} (LSCM) powders is prepared by the carbonate coprecipitation method for use as anodes in solid oxide fuel cells. The supersaturation ratio (R = [(NH{sub 4}){sub 2}CO{sub 3}]/([La{sup 3+}] + [Sr{sup 2+}] + [Cr{sup 3+}] + [Mn{sup 2+}])) during the coprecipitation determines the relative compositions of La, Sr, Cr, and Mn. The composition of the precursor approaches the stoichiometric one at the supersaturation range of 4 {<=} R {<=} 12.5, whereas Sr and Mn components are deficient at R < 4 and excessive at R = 25. The fine and phase-pure LSCM powders are prepared by heat treatment at very low temperature (1000 C) at R = 7.5 and 12.5. By contrast, the solid-state reaction requires a higher heat-treatment temperature (1400 C). The catalytic activity of the LSCM electrodes is enhanced by using carbonate-derived powders to manipulate the electrode microstructures. (author)

K{sub 6} carbon: A metallic carbon allotrope in sp{sup 3} bonding networks

Energy Technology Data Exchange (ETDEWEB)

Niu, Chun-Yao; Wang, Xin-Quan; Wang, Jian-Tao, E-mail: wjt@aphy.iphy.ac.cn [Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China)

2014-02-07

We identify by first-principles calculations a new cubic carbon phase in I4{sub 1}32 (O{sup 8}) symmetry, named K{sub 6} carbon, which has a six atom primitive cell comprising sp{sup 3} hybridized C{sub 3} triangle rings. The structural stability is verified by phonon mode analysis. The calculated elastic constants show that the K{sub 6} carbon is a high ductile material with a density even lower than graphite. Electronic band and density of states calculations reveal that it is a metallic carbon allotrope with a high electronic density of states of ∼0.10 states/eV per atom at the Fermi level. These results broaden our understanding of the structural and electronic properties of carbon allotropes.

Highly regenerable carbon-Fe{sub 3}O{sub 4} core–satellite nanospheres as oxygen reduction electrocatalyst and magnetic adsorbent

Energy Technology Data Exchange (ETDEWEB)

Zhou, Wenqiang [Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, School of Materials Science and Engineering, and Institute for Advanced Study, Tongji University, Shanghai 201804 (China); School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003 (China); Liu, Minmin; Cai, Chao [Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, School of Materials Science and Engineering, and Institute for Advanced Study, Tongji University, Shanghai 201804 (China); Zhou, Haijun, E-mail: zhouhaijun@just.edu.cn [School of Materials Science and Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003 (China); Liu, Rui, E-mail: ruiliu@tongji.edu.cn [Key Laboratory of Advanced Civil Engineering Materials of Ministry of Education, School of Materials Science and Engineering, and Institute for Advanced Study, Tongji University, Shanghai 201804 (China)

2017-02-15

We present the synthesis and multifunctional utilization of core-satellite carbon-Fe{sub 3}O{sub 4} nanoparticles to serve as the enabling platform for a range of applications including oxygen reduction reaction (ORR) and magnetic adsorbent. Starting from polydopamine (PDA) nanoparticles and Fe(NO{sub 3}){sub 3}, carbon-Fe{sub 3}O{sub 4} core–satellite nanospheres are synthesized through successive steps of impregnation, ammoniation and carbonization. The synergistic combination of Fe{sub 3}O{sub 4} and N-doped carbon endows the nanocomposite with high electrochemical activity in ORR and mainly four electrons transferred in reaction process. Furthermore, carbon-Fe{sub 3}O{sub 4} nanoparticles used as magnetic adsorbent exhibit the efficient removal of Rhodamine B from an aqueous solution. The recovery and reuse of the adsorbent is demonstrated 5 times without any detectible loss in activity. - Graphical abstract: Starting from polydopamine (PDA) nanoparticles and Fe(NO{sub 3}){sub 3}, carbon-Fe{sub 3}O{sub 4} core–satellite nanospheres are synthesized through successive steps of impregnation, ammoniation and carbonization. The nanocomposites serve as the enabling platform for a range of applications including oxygen reduction reaction (ORR) and magnetic adsorbent. - Highlights: • Carbon-Fe{sub 3}O{sub 4} core–satellite nanospheres are synthesized through successive steps of impregnation, ammoniation and carbonization. • Polydopamine and Fe(NO{sub 3}){sub 3} are precursors for N-doped carbon source and Fe{sub 3}O{sub 4} nanoparticles, respectively. • The nanocomposites exhibit high electrochemical activity in ORR. • The nanocomposites effectively adsorb organic dyes with magnetic recovery and good recycle property.

Mesoporous carbon composite for CO{sub 2} capture

Energy Technology Data Exchange (ETDEWEB)

Hwang, Chih-Chau; Jin, Zhong; Lu, Wei; Sun, Zhengzong; Alemany, Lawrence; Tour, James M. [Rice University, Houston, TX (United States); Lomeda, Jay R.; Flatt, Austen K. [Nalco Company, Naperville, IL (United States)

2012-07-01

Herein we report a carbon based technology that can be used to rapidly adsorb and release CO{sub 2}. CO{sub 2} uptake by the synthesized composites was determined using a gravimetric method at room temperature and atmospheric pressure. 39% polyethylenimine-mesocarbon (PEI-CMK-3) composite had {approx} 12 wt% CO{sub 2} uptake capacity and a 37% polyvinylamine meso-carbon (PVA-CMK-3) composite had {approx} 13 wt% CO{sub 2} uptake capacity. The sorbents were easily regenerated at 75 deg C and exhibit excellent stability over multiple regeneration cycles. CO{sub 2} uptake was equivalent when using 10% CO{sub 2} in 90% CH{sub 4}, C{sub 2}H{sub 6} and C{sub 3}H{sub 9} mixture, underscoring the efficacy for CO{sub 2} separation from natural gas. (author)

Heterogeneous photo-Fenton degradation of acid red B over Fe{sub 2}O{sub 3} supported on activated carbon fiber

Energy Technology Data Exchange (ETDEWEB)

Lan, Huachun [Key Laboratory of Drinking Water Science and Technology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences,China (China); Wang, Aiming [Department of Municipal and Environmental Engineering, School of Civil Engineering, Beijing Jiaotong University,China (China); Liu, Ruiping, E-mail: liuruiping@rcees.ac.cn [Key Laboratory of Drinking Water Science and Technology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences,China (China); Liu, Huijuan; Qu, Jiuhui [Key Laboratory of Drinking Water Science and Technology, Research Center for Eco-Environmental Sciences, Chinese Academy of Sciences,China (China)

2015-03-21

Highlights: • Fe{sub 2}O{sub 3} with small particle size was highly dispersed on activated carbon fiber. • Fe{sub 2}O{sub 3}/ACF exhibited higher photo-Fenton activity toward ARB degradation. • Fe{sub 2}O{sub 3}/ACF has an excellent long-term stability without obvious deactivation. - Abstract: Fe{sub 2}O{sub 3} supported on activated carbon fiber (Fe{sub 2}O{sub 3}/ACF) was prepared via an impregnation method and characterized by X-ray diffraction, scanning electron microscopy and BET analysis. The results indicated that Fe{sub 2}O{sub 3} with small particle size was highly dispersed on the surface of the ACF and the introduction of Fe{sub 2}O{sub 3} did not change the ACF pore structure. Fe{sub 2}O{sub 3}/ACF exhibited a higher Fenton efficiency for the degradation of acid red B (ARB), especially under simulated solar irradiation. Complete decoloration of the ARB solution and 43% removal of TOC could be achieved within 200 min under optimal conditions. It was verified that more ·OH radicals were generated in the photo-assisted Fenton process and involved as active species in ARB degradation. FTIR analysis indicated that the degradation of ARB was initiated through the cleavage of −N=N−, followed by hydroxylation and opening of phenyl rings to form aliphatic acids, and further oxidation of aliphatic acids would produce CO{sub 2} and H{sub 2}O. Moreover, Fe{sub 2}O{sub 3}/ACF maintained its activity after being reused 4 times and the release of iron from the catalyst was found to be insignificant during the Fenton and photo-Fenton processes, indicating that Fe{sub 2}O{sub 3}/ACF had good long-term stability.

CO/sub 2/ carbon cycle and climate interactions

Energy Technology Data Exchange (ETDEWEB)

Grassl, H; Maier-Reimer, E; Degens, E T; Kempe, S; Spitzy, A

1984-03-01

Past and expected emissions of anthropogenic CO/sub 2/ stimulate carbon cycle and climate research. Prognoses of future CO/sub 2/ levels depend on energy scenarios and on the reaction of the biosphere and hydrosphere to elevated atmospheric CO/sub 2/ concentrations. The reaction of the reservoirs vegetation, freshwater and oceans to disturbances of the carbon cycle is reviewed. For the oceans first results of a simple carbon cycle model implanted in a three-dimensional general circulation model are presented. This model allows experiments not possible with previous box models.

Removal of diethyl phthalate from water solution by adsorption, photo-oxidation, ozonation and advanced oxidation process (UV/H{sub 2}O{sub 2}, O{sub 3}/H{sub 2}O{sub 2} and O{sub 3}/activated carbon)

Energy Technology Data Exchange (ETDEWEB)

Medellin-Castillo, Nahum A. [Centro de Investigacion y Estudios de Posgrado, Facultad de Ingenieria, Universidad Autonoma de San Luis Potosi, Av. Dr. M. Nava No.6, San Luis de Potosi, 78290 (Mexico); Ocampo-Perez, Raul [Centro de Investigacion y Estudios de Posgrado, Facultad de Ciencias Quimicas, Universidad Autonoma de San Luis Potosi, San Luis Potosi, 78290 (Mexico); Departamento de Quimica Inorganica, Facultad de Ciencias, Universidad de Granada, 18071, Granada (Spain); Leyva-Ramos, Roberto [Centro de Investigacion y Estudios de Posgrado, Facultad de Ciencias Quimicas, Universidad Autonoma de San Luis Potosi, San Luis Potosi, 78290 (Mexico); Sanchez-Polo, Manuel [Departamento de Quimica Inorganica, Facultad de Ciencias, Universidad de Granada, 18071, Granada (Spain); Rivera-Utrilla, Jose, E-mail: jrivera@ugr.es [Departamento de Quimica Inorganica, Facultad de Ciencias, Universidad de Granada, 18071, Granada (Spain); Mendez-Diaz, Jose D. [Departamento de Quimica Inorganica, Facultad de Ciencias, Universidad de Granada, 18071, Granada (Spain)

2013-01-01

The objective of this work was to compare the effectiveness of conventional technologies (adsorption on activated carbon, AC, and ozonation) and technologies based on advanced oxidation processes, AOPs, (UV/H{sub 2}O{sub 2}, O{sub 3}/AC, O{sub 3}/H{sub 2}O{sub 2}) to remove phthalates from aqueous solution (ultrapure water, surface water and wastewater). Diethyl phthalate (DEP) was chosen as a model pollutant because of its high water solubility (1080 mg/L at 293 K) and toxicity. The activated carbons showed a high adsorption capacity to adsorb DEP in aqueous solution (up to 858 mg/g), besides the adsorption mechanism of DEP on activated carbon is governed by dispersive interactions between {pi} electrons of its aromatic ring with {pi} electrons of the carbon graphene planes. The photodegration process showed that the pH solution does not significantly affect the degradation kinetics of DEP and the first-order kinetic model satisfactorily fitted the experimental data. It was observed that the rate of decomposition of DEP with the O{sub 3}/H{sub 2}O{sub 2} and O{sub 3}/AC systems is faster than that with only O{sub 3}. The technologies based on AOPs (UV/H{sub 2}O{sub 2}, O{sub 3}/H{sub 2}O{sub 2}, O{sub 3}/AC) significantly improve the degradation of DEP compared to conventional technologies (O{sub 3}, UV). AC adsorption, UV/H{sub 2}O{sub 2}, O{sub 3}/H{sub 2}O{sub 2}, and O{sub 3}/AC showed a high yield to remove DEP; however, the disadvantage of AC adsorption is its much longer time to reach maximum removal. The best system to treat water (ultrapure and natural) polluted with DEP is the O{sub 3}/AC one since it achieved the highest DEP degradation and TOC removal, as well as the lower water toxicity. -- Highlights: Black-Right-Pointing-Pointer Activated carbons showed a high adsorption capacity (up to 858 mg/g) to remove DEP. Black-Right-Pointing-Pointer The pH solution did not significantly affect the photodegradation kinetics of DEP. Black

Carbon and nitrogen co-doping self-assembled MoS{sub 2} multilayer films

Energy Technology Data Exchange (ETDEWEB)

Zhang, Xiaoqin [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050 (China); Xu, Jiao; Chai, Liqiang [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); He, Tengfei [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050 (China); Yu, Fucheng [School of Materials Science and Engineering, Lanzhou University of Technology, Lanzhou 730050 (China); Wang, Peng, E-mail: pengwang@licp.cas.cn [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China)

2017-06-01

Highlights: • Mo–S–C–N composite films were synthesized by using reactive magnetron sputtering. • A self-assembled multilayer structure with periodicity in the nanometer scale was formed in the composite film. • The hardness of Mo–S–C–N film deposited at optimized parameter reaches up to 9.76 GPa. • The wear rate of deposited Mo–S–C–N film both in vacuum and ambient atmosphere decreases dramatically. - Abstract: Mo–S–C–N composite films were prepared using reactive magnetron sputtering of graphite and MoS{sub 2} targets in argon and nitrogen atmospheres. The effects of carbon/nitrogen co-doping and carbon concentration on the composition, microstructure, mechanical and tribological properties of deposited films have been investigated by various characterization techniques. The results show that the deposited films comprise MoS{sub 2} nanocrystalline and amorphous carbon, and the incorporating nitrogen forms Mo-N and C–N chemical bonds. Increasing carbon concentration leads to the increase of sp{sup 2} carbon fraction in the films. Furthermore, the high-resolution transmission electron microscopy reveals that a self-assembled multilayer structure with periodicity in the nanometer scale is formed in the Mo–S–C–N film. Benefiting from the composite and self-assembled multilayer structures, the hardness of Mo–S–C–N film deposited at optimized parameter reaches up to 9.76 GPa, and corresponding friction experiment indicates that this composite films display low friction coefficient and high wear resistance both in vacuum and ambient air conditions.

Designing a hand rest tremor dynamic vibration absorber using H{sub 2} optimization method

Energy Technology Data Exchange (ETDEWEB)

Rahnavard, Mostafa; Dizaji, Ahmad F. [Tehran University, Tehran (Iran, Islamic Republic of); Hashemi, Mojtaba [Amirkabir University, Tehran (Iran, Islamic Republic of); Faramand, Farzam [Sharif University, Tehran (Iran, Islamic Republic of)

2014-05-15

An optimal single DOF dynamic absorber is presented. A tremor has a random nature and then the system is subjected to a random excitation instead of a sinusoidal one; so the H{sub 2} optimization criterion is probably more desirable than the popular H{sub ∞} optimization method and was implemented in this research. The objective of H{sub 2} optimization criterion is to reduce the total vibration energy of the system for overall frequencies. An objective function, considering the elbow joint angle, θ {sub 2}, tremor suppression as the main goal, was selected. The optimization was done by minimization of this objective function. The optimal system, including the absorber, performance was analyzed in both time and frequency domains. Implementing the optimal absorber, the frequency response amplitude of θ{sub 2} was reduced by more than 98% and 80% at the first and second natural frequencies of the primary system, respectively. A reduction of more than 94% and 78%, was observed for the shoulder joint angle, θ{sub 1}. The objective function also decreased by more than 46%. Then, two types of random inputs were considered. For the first type, θ{sub 1} and θ {sub 2} revealed 60% and 39% reduction in their rms values, whereas for the second type, 33% and 50% decrease was observed.

Blood donors' perceptions, motivators and deterrents in Sub-Saharan Africa - a scoping review of evidence.

Science.gov (United States)

Asamoah-Akuoko, Lucy; Hassall, Oliver W; Bates, Imelda; Ullum, Henrik

2017-06-01

Achieving an adequate blood supply in Sub-Saharan Africa (SSA) through donor mobilization and retention is crucial. Factors that motivate or deter blood donors vary according to beliefs and social norms. Understanding the factors that influence blood donation behaviour in SSA is vital to developing effective strategies to address blood donor motivation and retention. This review of 35 studies from 16 SSA countries collates available evidence concerning the perceptions, motivators and deterrents that influence blood donors in SSA. The review revealed a common understanding that blood and blood donation save lives. The main deterrent to blood donation was fear due to lack of knowledge and discouraging spiritual, religious and cultural perceptions of blood donation. The main motivators for blood donation were altruism, donating blood for family and incentives. The findings support the need for targeted, culturally sensitive education, recruitment and retention strategies to improve the blood supply in SSA. © 2017 John Wiley & Sons Ltd.

Enhanced photovoltaic properties in graphitic carbon nanospheres networked TiO{sub 2} nanocomposite based dye sensitized solar cell

Energy Technology Data Exchange (ETDEWEB)

Agarwal, Radhe [Department of Physics and Institute for Functional Nanomaterials, University of Puerto Rico, San Juan, PR 00931 (United States); Sahoo, Satyaprakash, E-mail: satya504@gmail.com [Department of Physics and Institute for Functional Nanomaterials, University of Puerto Rico, San Juan, PR 00931 (United States); Chitturi, Venkateswara Rao [Department of Physics and Institute for Functional Nanomaterials, University of Puerto Rico, San Juan, PR 00931 (United States); Williams, Joseph D. [Department of Biomedical and Chemical Engineering, Syracuse University, L.C. Smith College of Engineering and Computer Science, Syracuse, NY (United States); Resto, Oscar [Department of Physics and Institute for Functional Nanomaterials, University of Puerto Rico, San Juan, PR 00931 (United States); Katiyar, Ram S., E-mail: rkatiyar@hpcf.uprrp.edu [Department of Physics and Institute for Functional Nanomaterials, University of Puerto Rico, San Juan, PR 00931 (United States)

2015-08-25

Highlights: • Nano size graphitic carbon nanospheres were prepared from MWCNTs. • TiO{sub 2}/GCNS composite was used as the photoanode in dye-sensitized solar cell. • An improved photovoltaic performance with GCNS–TiO{sub 2} composite was noticed. - Abstract: In this work, we report a novel carbon based TiO{sub 2} nanocomposite electron injection layer (photoanode) toward the improved performance of DSSCs. Graphitic carbon nanospheres (GCNSs) were synthesized by a unique acidic treatment of multi-wall carbon nanotubes. GCNS–TiO{sub 2} nanocomposites with different concentrations of GCNSs (ranging from 5 to 20 μL) were prepared to use as photoanodes in DSSCs. Structural and morphological properties of GCNS–TiO{sub 2} nanocomposites were analyzed by Raman spectroscopy and ultra-high resolution transmission electron microscopy techniques, respectively. A systematic increment in the short circuit current density (J{sub SC}) and open circuit voltage (V{sub OC}) of DSSC was observed by increasing GCNS concentration up to an optimal value, possibly due to the combined effect of slight rise in quasi-Fermi level and higher carrier transport rate in the resultant composite. Thus, a significant enhancement of ∼47% in the efficiency of DSSC containing GCNS–TiO{sub 2} photoanode was observed as compare to DSSC with pure TiO{sub 2} photoanode.

NiFe{sub 2}O{sub 4}/activated carbon nanocomposite as magnetic material from petcoke

Energy Technology Data Exchange (ETDEWEB)

Briceño, Sarah, E-mail: sbriceno@ivic.gob.ve [Laboratorio de Física de la Materia Condensada, Centro de Física, Instituto Venezolano de Investigaciones Científicas IVIC, Apartado 20632, Caracas 1020-A (Venezuela, Bolivarian Republic of); Brämer-Escamilla, W., E-mail: wbramer@ivic.gob.ve [Laboratorio de Física de la Materia Condensada, Centro de Física, Instituto Venezolano de Investigaciones Científicas IVIC, Apartado 20632, Caracas 1020-A (Venezuela, Bolivarian Republic of); Silva, P. [Laboratorio de Física de la Materia Condensada, Centro de Física, Instituto Venezolano de Investigaciones Científicas IVIC, Apartado 20632, Caracas 1020-A (Venezuela, Bolivarian Republic of); García, J.; Del Castillo, H.; Villarroel, M. [Laboratorio de Cinética y Catálisis, Departamento de Química, Facultad de Ciencias, Universidad de Los Andes ULA, Mérida 5101-A (Venezuela, Bolivarian Republic of); Rodriguez, J.P. [Laboratorio de Microscopia Electrónica. Instituto de Estudios Científicos y Tecnológicos IDECYT. Apartado 47925 - Caracas 1041-A (Venezuela, Bolivarian Republic of); Ramos, M.A.; Morales, R. [Instituto Zuliano de Investigaciones Tecnológicas INZIT. Apdo. Postal 331. La Cañada-Maracaibo (Venezuela, Bolivarian Republic of); Diaz, Y. [Centro de Química, Instituto Venezolano de Investigaciones Científicas IVIC, Apartado 20632, Caracas 1020-A (Venezuela, Bolivarian Republic of)

2014-06-01

Nickel ferrite (NiFe{sub 2}O{sub 4}) was supported on activated carbon (AC) from petroleum coke (petcoke). Potassium hydroxide (KOH) was employed with petcoke to produce activated carbon. NiFe{sub 2}O{sub 4} were synthesized using PEG-Oleic acid assisted hydrothermal method. The structural and magnetic properties were determined using thermogravimetric and differential thermal analysis (TGA–DTA), X-ray diffraction (XRD), Fourier Transform Infrared (IR-FT), surface area (BET), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating sample magnetometry (VSM). XRD analysis revealed the cubic spinel structure and ferrite phase with high crystallinity. IR-FT studies showed that chemical modification promoted the formation of surface oxygen functionalities. Morphological investigation by SEM showed conglomerates of spherical nanoparticles with an average particle size of 72 nm and TEM showed the formation of NiFe{sub 2}O{sub 4}/carbon nanofibers. Chemical modification and activation temperature of 800 °C prior to activation dramatically increased the BET surface area of the resulting activated carbon to 842.4 m{sup 2}/g while the sulfur content was reduced from 6 to 1%. Magnetic properties of nanoparticles show strong dependence on the particle size. - Highlights: • TEM showed the formation of NiFe{sub 2}O{sub 4}/carbon nanofibers. • Nanoparticles were supported on the activated carbon from petcoke. • Activation dramatically increased the BET surface area to 842 m{sup 2}/g. • Magnetic properties show strong dependence on the particle size. • Sulphur content was reduced from 6 to 1% with the petcoke activation.

Transformation of carbon tetrachloride in an anaerobic packed-bed reactor without addition of another electron donor

NARCIS (Netherlands)

de Best, JH; Hunneman, P; Doddema, HJ; Janssen, DB; Harder, W; Doddema, Hans J.

1999-01-01

Carbon tetrachloride (52 mu M) was biodegraded for more than 72% in an anaerobic packed-bed reactor without addition of an external electron donor. The chloride mass balance demonstrated that all carbon tetrachloride transformed was completely dechlorinated. Chloroform and dichloromethane were

Transformation of carbon tetrachloride in an anaerobic packed-bed reactor without addition of another electron donor

NARCIS (Netherlands)

Best, J.H. de; Hunneman, P.; Doddema, H.J.; Janssen, D.B.; Harder, W.

1999-01-01

Carbon tetrachloride (52 μM) was biodegraded for more than 72% in an anaerobic packed-bed reactor without addition of an external electron donor. The chloride mass balance demonstrated that all carbon tetrachloride transformed was completely dechlorinated. Chloroform and dichloromethane were

Adsorption of SO{sub 2} on activated carbon for low gas concentrations

Energy Technology Data Exchange (ETDEWEB)

Zhang, P.; Wanko, H.; Ulrich, J. [Martin-Luther-Universitaet Halle-Wittenberg, Zentrum fuer Ingenieurwissenschaften, Verfahrenstechnik/TVT, Halle (Saale) (Germany)

2007-05-15

Adsorption experiments of SO{sub 2} on activated carbon has been carried out for low concentrations (about 100 ppm) at room temperature (15 to 33 C) with varying humidity in the air. The breakthrough curves show that at high relative humidity or relative higher SO{sub 2} concentration, the load capacity increases with respect to temperature. The humidity of the air is also of benefit to the load capacity of SO{sub 2}. When an adsorption process is interrupted and the activated carbon is kept closed for a while, the SO{sub 2} concentration at the exit of a fixed-bed adsorber is similar to that of the fresh activated carbon and begins at a very low value. It appears that the sorption potential has been refreshed after the storage period. Analysis of desorption experiments by simultaneous thermal analysis combined with mass spectrometry (MS) after loading, shows that the physisorbed SO{sub 2} and H{sub 2}O are desorbed at low temperatures. At higher temperatures, the MS peak of SO{sub 2} and H{sub 2}O occur at the same time. Compared with desorption immediately after loading, after one day, the desorption peak due to the physisorbed SO{sub 2} disappears. From this, it can be concluded that the refreshment of the loading capacity of the activated carbon after storage is mainly due to a change in the nature of the SO{sub 2} from a physisorbed state to a chemisorbed form. The same mechanism leads to a continuous refreshment of the sorption potential by means of a chemical reaction during the adsorption process. (Abstract Copyright [2007], Wiley Periodicals, Inc.)

Metformin regulates global DNA methylation via mitochondrial one-carbon metabolism.

Science.gov (United States)

Cuyàs, E; Fernández-Arroyo, S; Verdura, S; García, R Á-F; Stursa, J; Werner, L; Blanco-González, E; Montes-Bayón, M; Joven, J; Viollet, B; Neuzil, J; Menendez, J A

2018-02-15

The anti-diabetic biguanide metformin may exert health-promoting effects via metabolic regulation of the epigenome. Here we show that metformin promotes global DNA methylation in non-cancerous, cancer-prone and metastatic cancer cells by decreasing S-adenosylhomocysteine (SAH), a strong feedback inhibitor of S-adenosylmethionine (SAM)-dependent DNA methyltransferases, while promoting the accumulation of SAM, the universal methyl donor for cellular methylation. Using metformin and a mitochondria/complex I (mCI)-targeted analog of metformin (norMitoMet) in experimental pairs of wild-type and AMP-activated protein kinase (AMPK)-, serine hydroxymethyltransferase 2 (SHMT2)- and mCI-null cells, we provide evidence that metformin increases the SAM:SAH ratio-related methylation capacity by targeting the coupling between serine mitochondrial one-carbon flux and CI activity. By increasing the contribution of one-carbon units to the SAM from folate stores while decreasing SAH in response to AMPK-sensed energetic crisis, metformin can operate as a metabolo-epigenetic regulator capable of reprogramming one of the key conduits linking cellular metabolism to the DNA methylation machinery.

Porous carbon derived via KOH activation of a hypercrosslinked porous organic polymer for efficient CO{sub 2}, CH{sub 4}, H{sub 2} adsorptions and high CO{sub 2}/N{sub 2} selectivity

Energy Technology Data Exchange (ETDEWEB)

Modak, Arindam; Bhaumik, Asim, E-mail: msab@iacs.res.in

2015-12-15

Microporous carbon having Brunauer-Emmett-Teller (BET) surface area of 2186 m{sup 2} g{sup −1} and micropore volume of 0.85 cm{sup 3} g{sup −1} has been synthesized via KOH induced high temperature carbonization of a non-conjugated hypercrosslinked organic polymer. Owing to the templating and activation by KOH, we have succeeded in making a microporous carbon from this porous polymer and the resultant carbon material showed high uptake for CO{sub 2} (7.6 mmol g{sup −1}) and CH{sub 4} (2.4 mmol g{sup −1}) at 1 atm, 273 K together with very good selectivity for the CO{sub 2}/N{sub 2} (30.2) separation. Furthermore, low pressure (1 atm) H{sub 2} (2.6 wt%, 77 K) and water uptake (57.4 wt%, 298 K) ability of this polymer derived porous activated carbon is noteworthy. - Graphical abstract: Microporous carbon with BET surface area of 2186 m{sup 2} g{sup −1} has been synthesized via KOH activation of a porous organic polymer and it showed high uptake for CO{sub 2} (7.6 mmol g{sup −1}), CH{sub 4} (2.4 mmol g{sup −1}) and H{sub 2} (2.6 wt%) at 1 atm together with very good selectivity for CO{sub 2}. - Highlights: • Porous carbon from hypercrosslinked organic polymer. • KOH activated carbon with BET surface area 2186 m{sup 2} g{sup −1}. • High CO2 uptake (7.6 mmol g{sup −1}) and CO{sub 2}/N{sub 2} selectivity (30.2). • Porous carbon also showed high H{sub 2} (2.6 wt%) and H{sub 2}O (57.4 wt%) uptakes.

SO{sub 2} removal from flue gas by activated carbon

Energy Technology Data Exchange (ETDEWEB)

Nilgun Karatepe; Ilkun Orbak; Reha Yavuz; Ayse Ozyuguran [Istanbul Technical University, Maslak-Istanbul (Turkey). Institute of Energy

2007-07-01

Adsorption of sulphur dioxide (SO{sub 2}) onto activated carbons prepared from Tuncbilek lignite with different methods was investigated. Experimental results showed that the adsorption temperature, initial SO{sub 2} concentration, particle size of the activated carbon and H{sub 2}O content in the flue gas had significantly effect on the amounts of SO{sub 2} adsorbed. Textural (BET surface area, micropore surface area, total pore volume, micropore volume and average pore size) characteristics of activated carbons also played an important role on adsorption of SO{sub 2}. 10 refs., 5 figs., 4 tabs.

Advanced landfill leachate treatment using iron-carbon microelectrolysis- Fenton process: Process optimization and column experiments

Energy Technology Data Exchange (ETDEWEB)

Wang, Liqun, E-mail: 691127317@qq.com [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China); Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082 (China); Yang, Qi, E-mail: yangqi@hnu.edu.cn [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China); Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082 (China); Wang, Dongbo [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China); Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082 (China); Li, Xiaoming, E-mail: xmli121x@hotmail.com [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China); Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082 (China); Zeng, Guangming; Li, Zhijun; Deng, Yongchao; Liu, Jun; Yi, Kaixin [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China); Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082 (China)

2016-11-15

Highlights: • Fe-C microelectrolysis-Fenton process is proposed to pretreat landfill leachate. • Operating variables are optimized by response surface methodology (RSM). • 3D-EEMs and MW distribution explain the mechanism of enhanced biodegradability. • Fixed-bed column experiments are performed at different flow rates. - Abstract: A novel hydrogen peroxide-enhanced iron-carbon (Fe-C) microelectrolysis reactor was proposed for the pretreatment of mature landfill leachate. This reactor, combining microelectrolysis with Fenton process, revealed high treatment efficiency. The operating variables, including Fe-C dosage, H{sub 2}O{sub 2} concentration and initial pH, were optimized by the response surface methodology (RSM), regarding the chemical oxygen demand (COD) removal efficiency and biochemical oxygen demand: chemical oxygen demand (BOD{sub 5}/COD) as the responses. The highest COD removal (74.59%) and BOD{sub 5}/COD (0.50) was obtained at optimal conditions of Fe-C dosage 55.72 g/L, H{sub 2}O{sub 2} concentration 12.32 mL/L and initial pH 3.12. Three-dimensional excitation and emission matrix (3D-EEM) fluorescence spectroscopy and molecular weight (MW) distribution demonstrated that high molecular weight fractions such as refractory fulvic-like substances in leachate were effectively destroyed during the combined processes, which should be attributed to the combination oxidative effect of microelectrolysis and Fenton. The fixed-bed column experiments were performed and the breakthrough curves at different flow rates were evaluated to determine the practical applicability of the combined process. All these results show that the hydrogen peroxide-enhanced iron-carbon (Fe-C) microelectrolysis reactor is a promising and efficient technology for the treatment of mature landfill leachate.

Sub-Riemannian geometry and optimal transport

CERN Document Server

Rifford, Ludovic

2014-01-01

The book provides an introduction to sub-Riemannian geometry and optimal transport and presents some of the recent progress in these two fields. The text is completely self-contained: the linear discussion, containing all the proofs of the stated results, leads the reader step by step from the notion of distribution at the very beginning to the existence of optimal transport maps for Lipschitz sub-Riemannian structure. The combination of geometry presented from an analytic point of view and of optimal transport, makes the book interesting for a very large community. This set of notes grew from a series of lectures given by the author during a CIMPA school in Beirut, Lebanon.

Production of Low Cost Carbon-Fiber through Energy Optimization of Stabilization Process

Directory of Open Access Journals (Sweden)

Gelayol Golkarnarenji

2018-03-01

Full Text Available To produce high quality and low cost carbon fiber-based composites, the optimization of the production process of carbon fiber and its properties is one of the main keys. The stabilization process is the most important step in carbon fiber production that consumes a large amount of energy and its optimization can reduce the cost to a large extent. In this study, two intelligent optimization techniques, namely Support Vector Regression (SVR and Artificial Neural Network (ANN, were studied and compared, with a limited dataset obtained to predict physical property (density of oxidative stabilized PAN fiber (OPF in the second zone of a stabilization oven within a carbon fiber production line. The results were then used to optimize the energy consumption in the process. The case study can be beneficial to chemical industries involving carbon fiber manufacturing, for assessing and optimizing different stabilization process conditions at large.

Reactivation properties of carbide slag as a CO{sub 2} sorbent during calcination/carbonation cycles

Energy Technology Data Exchange (ETDEWEB)

Li, Yingjie; Sun, Rongyue; Liu, Hongling; Lu, Chunmei [Shandong Univ., Jinan (China). School of Energy and Power Engineering

2013-07-01

The carbide slag from polyvinyl chloride production as industry hazardous wastes was proposed as CO{sub 2} sorbent at high temperature in calcium looping cycle. The cyclic CO{sub 2} capture behavior and the microstructure characteristics of the carbide slag as one of the typical calcium-based industrial wastes during the multiple calcination/carbonation cycles. Also, the comparisons between the carbide slag and the natural limestone in cyclic CO{sub 2} capture behavior were made. XRD analysis demonstrates that the predominating constituent of the carbide slag is Ca(OH){sub 2}. The carbonation temperature ranging from 650 to 700 C is favourable to cyclic carbonation of the carbide slag. The cyclic carbonation conversions of the carbide slag is lower than that of the limestone before a certain time, but the situation is converse after that time in a thermogravimetric analyzer. The carbide slag has better cyclic CO{sub 2} capture capacity. The carbonation conversion of the carbide slag retains 0.28 after 100 calcination/carbonation cycles, while the two limestones achieve 0.08 and 0.14 respectively at the same reaction conditions in a dual fixed-bed reactor. The microstructure of the carbide slag by SEM reveals the reason why it possesses better CO{sub 2} capture capacity.

Convenient synthesis of magnetically recyclable Fe{sub 3}O{sub 4}@C@CdS photocatalysts by depositing CdS nanocrystals on carbonized ferrocene

Energy Technology Data Exchange (ETDEWEB)

Li, Dan [Institute of Physical Chemistry, Zhejiang Normal University, Jinhua, Zhejiang 321004 (China); Xie, Jianjian [Department of Materials Physics, Zhejiang Normal University, Jinhua, Zhejiang 321004 (China); Zhang, Yong; Qiao, Ru [Institute of Physical Chemistry, Zhejiang Normal University, Jinhua, Zhejiang 321004 (China); Li, Sheng [Department of Materials Physics, Zhejiang Normal University, Jinhua, Zhejiang 321004 (China); Li, Zhengquan, E-mail: zqli@zjnu.edu.cn [Institute of Physical Chemistry, Zhejiang Normal University, Jinhua, Zhejiang 321004 (China); Department of Materials Physics, Zhejiang Normal University, Jinhua, Zhejiang 321004 (China)

2015-10-15

Development of magnetic visible-light-driven photocatalysts is desirable to the practical application of photocatalyts for collection and recycling use. Here we present a facile approach to synthesize Fe{sub 3}O{sub 4}@C@CdS magnetic photocatalysts which can avoid multi-step preparation process. Through one-step solvothermal carbonization of ferrocene, the produced carbon-coated Fe{sub 3}O{sub 4} clusters can serve as both magnetic cores and deposition substrates for in situ generating crystalline CdS nanocrystals on them by rapid microwave irradiation. The prepared Fe{sub 3}O{sub 4}@C@CdS nanoparticles exhibit a uniform core–shell structure and display good photocatalytic activity and recyclability in the degradation of organic dyes. These magnetic photocatalysts may find potential application in wastewater treatment for the future environment remedy. - Highlights: • A rapid strategy is presented to obtain multifunctional core–shell nanostructures. • Magnetic visible-light-driven Fe{sub 3}O{sub 4}@C@CdS nanophotocatalysts are synthesized. • Carbonized ferrocene can provide both magnetic cores and good deposition substrate. • Photocatalytic and recyclable properties of Fe{sub 3}O{sub 4}@C@CdS nanoparticles are explored.

Magnetic properties of NiFe{sub 2}O{sub 4}/carbon nanofibers from Venezuelan petcoke

Energy Technology Data Exchange (ETDEWEB)

Briceño, Sarah, E-mail: sbriceno@ivic.gob.ve [Laboratorio de Física de la Materia Condensada, Centro de Física, Instituto Venezolano de Investigaciones Científicas IVIC, Apartado 20632, Caracas 1020-A (Venezuela, Bolivarian Republic of); Silva, Pedro; Molina, Wilmer; Brämer-Escamilla, Werner; Alcalá, Olgi [Laboratorio de Física de la Materia Condensada, Centro de Física, Instituto Venezolano de Investigaciones Científicas IVIC, Apartado 20632, Caracas 1020-A (Venezuela, Bolivarian Republic of); Cañizales, Edgard [Área de Análisis Químico Inorgánico, PDVSA, INTEVEP, Los Teques 1070-A (Venezuela, Bolivarian Republic of)

2015-05-01

NiFe{sub 2}O{sub 4}/carbon nanofibers (NiFe{sub 2}O{sub 4}/CNFs) have been successfully synthesized by hydrotermal method using Venezuelan petroleum coke (petcoke) as carbon source and NiFe{sub 2}O{sub 4} as catalyst. The morphology, structural and magnetic properties of nanocomposite products were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), vibrating sample magnetometry (VSM) and electron paramagnetic resonance (EPR). XRD analysis revealed a cubic spinel structure and ferrite phase with high crystallinity. HR-TEM reveals the presence of CNFs with diameters of 4±2 nm. At room temperature, NiFe{sub 2}O{sub 4}/CNFs show superparamagnetic behavior with a maximum magnetization of 15.35 emu/g. Our findings indicate that Venezuelan petroleum coke is suitable industrial carbon source for the growth of magnetic CNFs. - Highlights: • NiFe{sub 2}O{sub 4}/CNFs have been synthesized by hydrothermal method using petroleum coke. • Nickel ferrite nanoparticles were used as the catalyst. • HR-TEM reveals the presence of CNFs with diameters of 4±2 nm. • The size of the nanoparticles defines the diameter of the CNFs.

Topology Optimization of Sub-Wavelength Antennas

DEFF Research Database (Denmark)

Erentok, Aycan; Sigmund, Ole

2011-01-01

We propose a topology optimization strategy for the systematic design of a three-dimensional (3D), conductor-based sub-wavelength antenna. The post-processed finite-element (FE) models of the optimized structure are shown to be self-resonant, efficient and exhibit distorted omnidirectional...

Vitamin B/sub 12/ production from whey and simulation of optimal cultural conditions. [Propionibacterium shermanii 566

Energy Technology Data Exchange (ETDEWEB)

Marwaha, S S; Kennedy, J F; Sethi, R P

1983-12-01

The paper reports Propionibacterium shermanii 566 to be an efficient culture, among the three propionibacteria tested, for vitamin B/sub 12/ fermentation from whey. On the basis of the results observed and expected values calculated from simulated equations, 24 hours old inoculum, 5 mg/iron and 4% whey lactose concentration were selected as the optimal values for the fermentation. Carbon mixture of whey lactose and D-glucose (3.6% + 0.4%) and supplementation of whey with 0.5% (NH/sub 4/)/sub 2/HPO/sub 4/ further enhanced the yield of the metabolite. Under optimum cultural conditions, the organism metabolized 5.12 ..mu..g vitamin B/sub 12//ml culture, subsequently reducing the BOD by 90%, thereby reducing the pollution problems.

Partitioning of One-Carbon Units in Folate and Methionine Metabolism Is Essential for Neural Tube Closure

Directory of Open Access Journals (Sweden)

Kit-Yi Leung

2017-11-01

Full Text Available Summary: Abnormal folate one-carbon metabolism (FOCM is implicated in neural tube defects (NTDs, severe malformations of the nervous system. MTHFR mediates unidirectional transfer of methyl groups from the folate cycle to the methionine cycle and, therefore, represents a key nexus in partitioning one-carbon units between FOCM functional outputs. Methionine cycle inhibitors prevent neural tube closure in mouse embryos. Similarly, the inability to use glycine as a one-carbon donor to the folate cycle causes NTDs in glycine decarboxylase (Gldc-deficient embryos. However, analysis of Mthfr-null mouse embryos shows that neither S-adenosylmethionine abundance nor neural tube closure depend on one-carbon units derived from embryonic or maternal folate cycles. Mthfr deletion or methionine treatment prevents NTDs in Gldc-null embryos by retention of one-carbon units within the folate cycle. Overall, neural tube closure depends on the activity of both the methionine and folate cycles, but transfer of one-carbon units between the cycles is not necessary. : Leung at al. find that embryonic neural tube closure depends both on the supply of one-carbon units to the folate cycle from glycine cleavage and on the methionine cycle. In contrast, transfer of one-carbon units from the folate cycle to the methionine cycle by MTHFR is dispensable. Keywords: one-carbon metabolism, folic acid, neural tube defects, spina bifida, glycine cleavage system, non-ketotic hyperglycinemia, eye, Mthfr, Gldc

Carbon and TiO{sub 2} synergistic effect on methylene blue adsorption

Energy Technology Data Exchange (ETDEWEB)

Simonetti, Evelyn Alves Nunes, E-mail: evelynalvesnunes@yahoo.com.br; Simone Cividanes, Luciana de; Campos, Tiago Moreira Bastos; Rossi Canuto de Menezes, Beatriz; Brito, Felipe Sales; Thim, Gilmar Patrocínio

2016-07-01

Due to its high efficiency, low cost and a simple operation, the adsorption process is an important and widely used technique for industrial wastewater treatment. Recent studies on the removal of artificial dyes by adsorption include a large number of adsorbents, such as: activated carbon, silicates, carbon nanotube, graphene, fibers, titanates and doped titanates. The carbon insertion in the TiO{sub 2} structure promotes a synergistic effect on the adsorbent composite, improving the adsorption and the charge-transfer efficiency rates. However, there are few studies regarding the adsorption capacity of TiO{sub 2}/Carbon composites with the carbon concentration. This study evaluates the effect of carbon (resorcinol/formaldehyde) insertion on TiO{sub 2} structure through the adsorption process. Adsorbents were prepared by varying the carbon weight percentages using the sol-gel method. The physicochemical properties of the catalysts prepared, such as crystallinity, particle size, surface morphology, specific surface area and pore volume were investigated. The kinetic study, adsorption isotherm, pH effect and thermodynamic study were examined in batch experiments using methylene blue as organic molecule. In addition, the effect of carbon phase on the adsorption capacity of TiO{sub 2}-carbon composite was deeply investigated. SEM micrographs showed that TiO{sub 2} phase grows along the carbon phase and FT-IR results showed the presence of Ti−O−C chemical bonding. The experiments indicate that the carbon phase acted as a nucleation agent for the growth of TiO{sub 2} during the sol-gel step, with a TiO{sub 2} structure suitable for blue methylene adsorption, resulting in a material with large surface area and slit-like or wedge-shaped pores. Further experiments will show the best carbon concentration for methylene blue adsorption using a TiO{sub 2} based material. - Highlights: • This article deals with the adsorption of methylene blue onto TiO{sub 2}-Carbon

Two different carbon-hydrogen complexes in silicon with closely spaced energy levels

Energy Technology Data Exchange (ETDEWEB)

Stübner, R., E-mail: ronald.stuebner@physik.tu-dresden.de, E-mail: kolkov@ifpan.edu.pl; Kolkovsky, Vl., E-mail: ronald.stuebner@physik.tu-dresden.de, E-mail: kolkov@ifpan.edu.pl; Weber, J. [Technische Universität Dresden, Institut für Angewandte Physik, 01062 Dresden (Germany)

2015-08-07

An acceptor and a single donor state of carbon-hydrogen defects (CH{sub A} and CH{sub B}) are observed by Laplace deep level transient spectroscopy at 90 K. CH{sub A} appears directly after hydrogenation by wet chemical etching or hydrogen plasma treatment, whereas CH{sub B} can be observed only after a successive annealing under reverse bias at about 320 K. The activation enthalpies of these states are 0.16 eV for CH{sub A} and 0.14 eV for CH{sub B}. Our results reconcile previous controversial experimental results. We attribute CH{sub A} to the configuration where substitutional carbon binds a hydrogen atom on a bond centered position between carbon and the neighboring silicon and CH{sub B} to another carbon-hydrogen defect.

Carbon materials for H{sub 2} storage

Energy Technology Data Exchange (ETDEWEB)

Zubizarreta, L.; Arenillas, A.; Pis, J.J. [Instituto Nacional del Carbon, CSIC, Apartado 73, 33080 Oviedo (Spain)

2009-05-15

In this work a series of carbons with different structural and textural properties were characterised and evaluated for their application in hydrogen storage. The materials used were different types of commercial carbons: carbon fibers, carbon cloths, nanotubes, superactivated carbons, and synthetic carbons (carbon nanospheres and carbon xerogels). Their textural properties (i.e., surface area, pore size distribution, etc.) were related to their hydrogen adsorption capacities. These H{sub 2} storage capacities were evaluated by various methods (i.e., volumetric and gravimetric) at different temperatures and pressures. The differences between both methods at various operating conditions were evaluated and related to the textural properties of the carbon-based adsorbents. The results showed that temperature has a greater influence on the storage capacity of carbons than pressure. Furthermore, hydrogen storage capacity seems to be proportional to surface area, especially at 77 K. The micropore size distribution and the presence of narrow micropores also notably influence the H{sub 2} storage capacity of carbons. In contrast, morphological or structural characteristics have no influence on gravimetric storage capacity. If synthetic materials are used, the textural properties of carbon materials can be tailored for hydrogen storage. However, a larger pore volume would be needed in order to increase storage capacity. It seems very difficult approach to attain the DOE and EU targets only by physical adsorption on carbon materials. Chemical modification of carbons would seem to be a promising alternative approach in order to increase the capacities. (author)

A game-theoretic approach to donor kidney sharing.

Science.gov (United States)

O'Brien, B J

1988-01-01

Graft survival in renal transplantation is a function, amongst other things, of the degree of histocompatibility lymphocyte-A (HLA) tissue matching achieved between donor and recipient. Yet a donor procured at centre A might match a transplant candidate at centre B and vice versa. This raises the question of whether, and under what circumstances, surgeons will offer and exchange donor kidneys and gain from such trade in terms of graft survival. We analyse the problem in a game-theoretic framework where the choice of strategy 'to offer or not?' is evaluated in the context of the uncertainty of reciprocation by the other player(s) in the game. The equilibrium solution to a number of variations of the game is predicted to be non-cooperation resulting in collectively sub-optimal graft survival rates. Some policy options for improving cooperation are considered including exchange incentives and coercive measures.

Effects of hydrostatic pressure on ionized donor bound exciton states in strained wurtzite GaN/Al{sub x}Ga{sub 1-x}N cylindrical quantum dots

Energy Technology Data Exchange (ETDEWEB)

Zheng Dongmei, E-mail: smdmzheng@163.com [College of Physics and Electromechanical Engineering, Sanming University, Sanming 365004 (China); Wang Zongchi; Xiao Boqi [College of Physics and Electromechanical Engineering, Sanming University, Sanming 365004 (China)

2012-11-01

Based on the effective-mass approximation and variational procedure, ionized donor bound exciton (D{sup +}, X) states confined in strained wurtzite (WZ) GaN/Al{sub x}Ga{sub 1-x}N cylindrical (disk-like) quantum dots (QDs) with finite-height potential barriers are investigated, with considering the influences of the built-in electric field (BEF), the biaxial strain dependence of material parameters and the applied hydrostatic pressure. The Schroedinger equation via the proper choice of the donor bound exciton trial wave function is solved. The behaviors of the binding energy of (D{sup +}, X) and the optical transition associated with (D{sup +}, X) are examined at different pressures for different QD sizes and donor positions. In our calculations, the effective masses of electron and hole, dielectric constants, phonon frequencies, energy gaps, and piezoelectric polarizations are taken into account as functions of biaxial strain and hydrostatic pressure. Our results show that the hydrostatic pressure, the QD size and the donor position have a remarkable influence on (D{sup +}, X) states. The hydrostatic pressure generally increases the binding energy of (D{sup +}, X). However, the binding energy tends to decrease for the QDs with large height and lower Al composition (x<0.3) if the donor is located at z{sub 0}{<=}0. The optical transition energy has a blue-shift (red-shift) if the hydrostatic pressure (QD height) increases. For the QDs with small height and low Al composition, the hydrostatic pressure dependence of the optical transition energy is more obvious. Furthermore, the relationship between the radiative decay time and hydrostatic pressure (QD height) is also investigated. It is found that the radiative decay time increases with pressure and the increment tendency is more prominent for the QDs with large height. The radiative decay time increases exponentially reaching microsecond order with increasing QD height. The physical reason has been analyzed in depth.

Evaluation of southern Quebec asbestos residues for CO{sub 2} sequestration by mineral carbonation : preliminary result

Energy Technology Data Exchange (ETDEWEB)

Huot, F. [Geo-conseils, Cap-Rouge, PQ (Canada); Beaudoin, G.; Hebert, R.; Constantin, M. [Laval Univ., Dept. of Geology and Geological Engineering, Quebec City, PQ (Canada); Bonin, G. [LAB Chrysotile Inc., Black Lake, PQ (Canada); Dipple, G.M. [British Columbia Univ., Vancouver, BC (Canada). Dept. of Earth and Ocean Sciences

2003-07-01

Carbon dioxide (CO{sub 2}) sequestration is one approach that can help reduce CO{sub 2} levels in the atmosphere. This paper discusses CO{sub 2} sequestration by mineral carbonation using ultramafic rock-hosted magnesian silicates (serpentine, olivine, talc). The carbonation process produces magnesite, which is a geologically stable and an environmentally safe magnesium carbonate. There are 3 potential CO{sub 2} sinks in southern Quebec that use such silicates. They are: (1) asbestos mill residues, (2) associated mine waste, and (3) ultramafic bedrock. Asbestos is extracted from serpentinized harzburgite located in the Thetford Mines and Asbestos ophiolitic massifs and also from the highly sheared Pennington Sheet. The physical and chemical properties of magnesium silicate deposits greatly determine their carbonation potential. A wide range of properties was observed in samples obtained from almost all asbestos mill residues and waste. The reaction which takes place depends on the mineral content. The kinetics of the reactions are influenced by humidity and grain size.

High photocatalytic activity of immobilized TiO{sub 2} nanorods on carbonized cotton fibers

Energy Technology Data Exchange (ETDEWEB)

Wang, Bin, E-mail: bwang23@cityu.edu.hk [Ability R and D Energy Research Center, School of Energy and Environment, City University of Hong Kong, Hong Kong (China); Karthikeyan, Rengasamy; Lu, Xiao-Ying [Ability R and D Energy Research Center, School of Energy and Environment, City University of Hong Kong, Hong Kong (China); Xuan, Jin [Ability R and D Energy Research Center, School of Energy and Environment, City University of Hong Kong, Hong Kong (China); State-Key Laboratory of Chemical Engineering, School of Mechanical and Power Engineering, East China University of Science and Technology, Shanghai 200237 (China); Leung, Michael K.H., E-mail: mkh.leung@cityu.edu.hk [Ability R and D Energy Research Center, School of Energy and Environment, City University of Hong Kong, Hong Kong (China)

2013-12-15

Highlights: • Hollow carbon fibers derived from natural cotton was successfully prepared by pyrolysis method. • TiO{sub 2} nanorods immobilized on carbon fibers by a facile hydrothermal method showed high photocatalytic activity. • The enhancement was due to the reduced band gap, improved dye adsorption capacity and effective electron–hole separation. -- Abstract: In this study, TiO{sub 2} nanorods were successfully immobilized on carbon fibers by a facile pyrolysis of natural cotton in nitrogen atmosphere followed by a one-pot hydrothermal method. Carbonized cotton fibers (CCFs) and TiO{sub 2}-CCFs composites were characterized using field-emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, X-ray diffractometer (XRD), diffuse reflectance UV–vis spectroscopy (DRS) and photoluminescence (PL) spectroscopy. Results implied that the band gap narrowing of TiO{sub 2} was achieved after integration of CCFs. Dye adsorption isotherm indicated that the maximum dye adsorption capacity (q{sub m}) of CCFs-1000 (13.4 mg/g) was 2 times higher than that of cotton fibers and q{sub m} of TiO{sub 2}-CCFs-1000 (9.0 mg/g) was 6–7 times higher than that of TiO{sub 2} nanorods. Photocatalytic activity of TiO{sub 2} nanorods prepared with 3 mL Ti(OBu){sub 4} showed the highest photocatalytic activity. TiO{sub 2}-CCFs-1000 exhibited higher activity than TiO{sub 2} immobilized on CCFs-400, CCFs-600 and CCFs-800. Good photostability of TiO{sub 2}-CCFs-1000 was found for dye degradation under visible light irradiation. The enhancement of photocatalytic dye degradation was due to the high adsorptivity of dye molecules, enhanced light adsorption and effective separation of electron–hole pairs. This work provides a low-cost and sustainable approach to immobilize nanostructured TiO{sub 2} on carbon fibers for environmental remediation.

The anodic dissolution of SIMFUEL (UO{sub 2}) in slightly alkaline sodium carbonate/bicarbonate solutions

Energy Technology Data Exchange (ETDEWEB)

Keech, P.G.; Goldik, J.S.; Qin, Z. [Department of Chemistry, University of Western Ontario, 1151 Richmond St, London ON, N6A 5B7 (Canada); Shoesmith, D.W., E-mail: dwshoesm@uwo.ca [Department of Chemistry, University of Western Ontario, 1151 Richmond St, London ON, N6A 5B7 (Canada)

2011-09-30

The corrosion of nuclear fuel under waste disposal conditions is likely to be influenced by the bicarbonate/carbonate content of the groundwater since it increases the solubility of the U{sup VI} corrosion product, [UO{sub 2}]{sup 2+}. As one of the half reactions involved in the corrosion process, the anodic dissolution of SIMFUEL (UO{sub 2}) has been studied in bicarbonate/carbonate solutions (pH 9.8) using voltammetric and potentiostatic techniques and electrochemical impedance spectroscopy. The reaction proceeds by two consecutive one electron transfer reactions (U{sup IV} {yields} U{sup V} {yields} U{sup VI}). At low potentials ({<=}250 mV (vs. SCE) the rate of the first electron transfer reaction is rate determining irrespective of the total carbonate concentration. At potentials >250 mV (vs. SCE) the formation of a U{sup VI}O{sub 2}CO{sub 3} surface layer begins to inhibit the dissolution rate and the current becomes independent of potential indicating rate control by the chemical dissolution of this layer.

Co{sub 3}O{sub 4} nanoparticles embedded in ordered mesoporous carbon with enhanced performance as an anode material for Li-ion batteries

Energy Technology Data Exchange (ETDEWEB)

Park, Junsu; Kim, Gil-Pyo [Seoul National University (SNU), World Class University (WCU) Program of Chemical Convergence for Energy and Environment C2E2, School of Chemical and Biological Engineering, College of Engineering, Institute of Chemical Processes (Korea, Republic of); Umh, Ha Nee [Kwangwoon University, Department of Chemical Engineering (Korea, Republic of); Nam, Inho; Park, Soomin [Seoul National University (SNU), World Class University (WCU) Program of Chemical Convergence for Energy and Environment C2E2, School of Chemical and Biological Engineering, College of Engineering, Institute of Chemical Processes (Korea, Republic of); Kim, Younghun [Kwangwoon University, Department of Chemical Engineering (Korea, Republic of); Yi, Jongheop, E-mail: jyi@snu.ac.kr [Seoul National University (SNU), World Class University (WCU) Program of Chemical Convergence for Energy and Environment C2E2, School of Chemical and Biological Engineering, College of Engineering, Institute of Chemical Processes (Korea, Republic of)

2013-09-15

A Co{sub 3}O{sub 4}/ordered mesoporous carbon (OMC) nanocomposite, in which Co{sub 3}O{sub 4} nanoparticles (NPs), with an average size of about 10 nm homogeneously embedded in the OMC framework, are prepared for use as an anode material in Li-ion batteries. The composite is prepared by a one-pot synthesis based on the solvent evaporation-induced co-self-assembly of a phenolic resol, a triblock copolymer F127, and Co(NO{sub 3}){sub 2}{center_dot}6H{sub 2}O, followed by carbonization and oxidation. The resulting material has a high reversible capacity of {approx}1,025 mA h g{sup -1} after 100 cycles at a current density of 0.1 A g{sup -1}. The enhanced cycling stability and rate capability of the composite can be attributed to the combined mesoporous nanostructure which provides efficient pathways for Li-ion transport and the homogeneous distribution of the Co{sub 3}O{sub 4} NPs in the pore wall of the OMC, which prevents aggregation. These findings suggest that the OMC has promise for use as a carbon metric for metals and metal oxides as an anode material in high performance Li-ion batteries.

Preparation and characterization of activated carbon from reedy grass leaves by chemical activation with H{sub 3}PO{sub 4}

Energy Technology Data Exchange (ETDEWEB)

Xu, Jianzhong, E-mail: xjz8112@sina.com [College of Chemistry and Environmental Science, Hebei University, Baoding 071002, Hebei (China); Chen, Lingzhi [College of Chemistry and Environmental Science, Hebei University, Baoding 071002, Hebei (China); Department of Applied Chemistry, Hengshui University, Hengshui 053000, Hebei (China); Qu, Hongqiang; Jiao, Yunhong; Xie, Jixing [College of Chemistry and Environmental Science, Hebei University, Baoding 071002, Hebei (China); Xing, Guangen [Department of Applied Chemistry, Hengshui University, Hengshui 053000, Hebei (China)

2014-11-30

Highlights: • Activated carbons were produced from reedy grass leaves by activation with phosphoric acid. • The activated carbons have a large number of oxygen- and phosphorus-containing surface groups. • The structure of activated carbons was bight fibers features on the surface and the external surface of the activated carbons was slightly corrugated and abundant pores. - Abstract: Activated carbons were produced from reedy grass leaves by chemical activation with H{sub 3}PO{sub 4} in N{sub 2} atmosphere and their characteristics were investigated. The effects of activation temperature and time were examined. Adsorption capacity was demonstrated with BET and iodine number. Micropore volume and pore size distribution of activated carbons were characterized by N{sub 2} adsorption isotherms. The surface area and iodine number of the activated carbons produced at 500 °C for 2 h were 1474 m{sup 2}/g and 1128 mg/g, respectively. Thermal decomposition of pure reedy grass leaves and H{sub 3}PO{sub 4}-impregnated reedy grass leaves have been investigated with thermogravimetric/mass spectroscopy (TG–MS) technique. It was found that the temperature and intensity of maximum evolution of H{sub 2}O and CO{sub 2} of H{sub 3}PO{sub 4}-impregnated reedy grass leaves were lower than that of pure reedy grass leaves. This implies that H{sub 3}PO{sub 4} as an activating reagent changed the thermal degradation of the reedy grass leaves, stabilized the cellulose structure, leading to a subsequent change in the evolution of porosity. The results of X-ray photoelectron spectroscopy and Fourier-infrared spectroscopy analysis indicate that the produced activated carbons have rich functional groups on surface.

Solvothermal synthesis of carbon coated N-doped TiO{sub 2} nanostructures with enhanced visible light catalytic activity

Energy Technology Data Exchange (ETDEWEB)

Yan Xuemin, E-mail: yanzhangmm2002@163.com [College of Chemistry and Environmental Engineering, Yangtze University, Jingzhou 434023 (China); Kang Jialing; Gao Lin; Xiong Lin; Mei Ping [College of Chemistry and Environmental Engineering, Yangtze University, Jingzhou 434023 (China)

2013-01-15

Highlights: Black-Right-Pointing-Pointer Chitosan was used as carbon and nitrogen resource to modify TiO{sub 2} nanostructure. Black-Right-Pointing-Pointer Nanocomposites with mesostructure were obtained by one-step solvothermal method. Black-Right-Pointing-Pointer Carbon species were modified on the surface of TiO{sub 2}. Black-Right-Pointing-Pointer Nitrogen was doped into the anatase titania lattice. Black-Right-Pointing-Pointer CTS-TiO{sub 2} nanocomposites show superior visible light photocatalytic activity. - Abstract: Visible light-active carbon coated N-doped TiO{sub 2} nanostructures(CTS-TiO{sub 2}) were prepared by a facile one-step solvothermal method with chitosan as carbon and nitrogen resource at 180 Degree-Sign C. The as-prepared samples were characterized by transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), N{sub 2} adsorption-desorption analysis, X-ray photoelectron spectroscopy (XPS), and ultraviolet-visible (UV-vis) diffuse reflectance spectroscopy. The CTS-TiO{sub 2} nanocomposites possess anatase phase of nanocrystalline structure with average particle size of about 5-7 nm. A wormhole mesostructure can be observed in the CTS-TiO{sub 2} nanocomposites due to the constituent agglomerated of nanoparticles. It has been evidenced that the nitrogen was doped into the anatase titania lattice and the carbon species were modified on the surface of TiO{sub 2}. The photocatalytic activities of the as-prepared photocatalysts were measured by the degradation of methylene blue (MB) under visible light irradiation at {lambda} {>=} 400 nm. The results show that CTS-TiO{sub 2} nanostructures display a higher visible light photocatalytic activity than pure TiO{sub 2}, commercial P25 and C-coated TiO{sub 2} (C-TiO{sub 2}) photocatalysts. The higher photocatalytic activity could be attributed to the band-gap narrowed by N-doping and the accelerated separation of the photo-generated electrons

Rural electrification in Sub Saharan Africa in a context of fluctuating oil-prices

DEFF Research Database (Denmark)

Nygaard, Ivan; Bindner, Henrik W.; Katic, Ivan

2009-01-01

matured and markets have gradually developed, PV for rural electrification has often been perceived with scepticism from potential users, donors, government officials and researchers, and solar PV has in many camps been labelled as donor driven, expensive and fragile technology mainly serving the richest......Solar PV is one among other low carbon technologies for rural electrification in Sub Saharan Africa (SSA). Solar PV systems have for almost 30 years been disseminated in SSA, resulting in more than half a million installations concentrated in a few countries. While PV systems have technically...... grid rural electrification schemes based on hybrid solar PVdiesel generators. This may bring PV systems in line with fossil fuel based systems in terms of consumer cost and options for productive use and it changes the market for PV from mainly donor supported schemes into mainstream rural...

Sub-optimal control of fuzzy linear dynamical systems under granular differentiability concept.

Science.gov (United States)

Mazandarani, Mehran; Pariz, Naser

2018-05-01

This paper deals with sub-optimal control of a fuzzy linear dynamical system. The aim is to keep the state variables of the fuzzy linear dynamical system close to zero in an optimal manner. In the fuzzy dynamical system, the fuzzy derivative is considered as the granular derivative; and all the coefficients and initial conditions can be uncertain. The criterion for assessing the optimality is regarded as a granular integral whose integrand is a quadratic function of the state variables and control inputs. Using the relative-distance-measure (RDM) fuzzy interval arithmetic and calculus of variations, the optimal control law is presented as the fuzzy state variables feedback. Since the optimal feedback gains are obtained as fuzzy functions, they need to be defuzzified. This will result in the sub-optimal control law. This paper also sheds light on the restrictions imposed by the approaches which are based on fuzzy standard interval arithmetic (FSIA), and use strongly generalized Hukuhara and generalized Hukuhara differentiability concepts for obtaining the optimal control law. The granular eigenvalues notion is also defined. Using an RLC circuit mathematical model, it is shown that, due to their unnatural behavior in the modeling phenomenon, the FSIA-based approaches may obtain some eigenvalues sets that might be different from the inherent eigenvalues set of the fuzzy dynamical system. This is, however, not the case with the approach proposed in this study. The notions of granular controllability and granular stabilizability of the fuzzy linear dynamical system are also presented in this paper. Moreover, a sub-optimal control for regulating a Boeing 747 in longitudinal direction with uncertain initial conditions and parameters is gained. In addition, an uncertain suspension system of one of the four wheels of a bus is regulated using the sub-optimal control introduced in this paper. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

N-doped polypyrrole-based porous carbons for CO{sub 2} capture

Energy Technology Data Exchange (ETDEWEB)

Sevilla, Marta; Valle-Vigon, Patricia; Fuertes, Antonio B. [Instituto Nacional del Carbon (CSIC), P.O. Box 73, 33080 Oviedo (Spain)

2011-07-22

Highly porous N-doped carbons have been successfully prepared by using KOH as activating agent and polypyrrole (PPy) as carbon precursor. These materials were investigated as sorbents for CO{sub 2} capture. The activation process was carried out under severe (KOH/PPy = 4) or mild (KOH/PPy = 2) activation conditions at different temperatures in the 600-800 C range. Mildly activated carbons have two important characteristics: i) they contain a large number of nitrogen functional groups (up to 10.1 wt% N) identified as pyridonic-N with a small proportion of pyridinic-N groups, and ii) they exhibit, in relation to the carbons prepared with KOH/PPy = 4, narrower micropore sizes. The combination of both of these properties explains the large CO{sub 2} adsorption capacities of mildly activated carbon. In particular, a very high CO{sub 2} adsorption uptake of 6.2 mmol.g{sup -1} (0 C) was achieved for porous carbons prepared with KOH/PPy = 2 and 600 C (1700 m{sup 2}.g{sup -1}, pore size {approx} 1 nm and 10.1 wt% N. Furthermore, we observed that these porous carbons exhibit high CO{sub 2} adsorption rates, a good selectivity for CO{sub 2}-N{sub 2} separation and it can be easily regenerated. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Optimization of IVF pregnancy outcomes with donor spermatozoa.

Science.gov (United States)

Wang, Jeff G; Douglas, Nataki C; Prosser, Robert; Kort, Daniel; Choi, Janet M; Sauer, Mark V

2009-03-01

To identify risk factors for suboptimal IVF outcomes using insemination with donor spermatozoa and to define a lower threshold that may signal a conversion to fertilization by ICSI rather than insemination. Retrospective, age-matched, case-control study of women undergoing non-donor oocyte IVF cycles using either freshly ejaculated (N=138) or cryopreserved donor spermatozoa (N=69). Associations between method of fertilization, semen sample parameters, and pregnancy rates were analyzed. In vitro fertilization of oocytes with donor spermatozoa by insemination results in equivalent fertilization and pregnancy rates compared to those of freshly ejaculated spermatozoa from men with normal semen analyses when the post-processing motility is greater than or equal to 88%. IVF by insemination with donor spermatozoa when the post-processing motility is less than 88% is associated with a 5-fold reduction in pregnancy rates when compared to those of donor spermatozoa above this motility threshold. When the post-processing donor spermatozoa motility is low, fertilization by ICSI is associated with significantly higher pregnancy rates compared to those of insemination. While ICSI does not need to be categorically instituted when using donor spermatozoa in IVF, patients should be counseled that conversion from insemination to ICSI may be recommended based on low post-processing motility.

High-rate nano-crystalline Li{sub 4}Ti{sub 5}O{sub 12} attached on carbon nano-fibers for hybrid supercapacitors

Energy Technology Data Exchange (ETDEWEB)

Naoi, Katsuhiko; Isobe, Yusaku; Aoyagi, Shintaro [Institute of Symbiotic Science and Technology, Tokyo University of Agriculture and Technology, 2-24-16 Naka-cho, Koganei, Tokyo 184-8558 (Japan); Ishimoto, Shuichi [Institute of Symbiotic Science and Technology, Tokyo University of Agriculture and Technology, 2-24-16 Naka-cho, Koganei, Tokyo 184-8558 (Japan); Nippon Chemi-Con Corporation, 363 Arakawa, Takahagi-shi, Ibaraki 318-8505 (Japan)

2010-09-15

A lithium titanate (Li{sub 4}Ti{sub 5}O{sub 12})-based electrode which can operate at unusually high current density (300 C) was developed as negative electrode for hybrid capacitors. The high-rate Li{sub 4}Ti{sub 5}O{sub 12} electrode has a unique nano-structure consisting of unusually small nano-crystalline Li{sub 4}Ti{sub 5}O{sub 12} (ca. 5-20 nm) grafted onto carbon nano-fiber anchors (nc-Li{sub 4}Ti{sub 5}O{sub 12}/CNF). This nano-structured nc-Li{sub 4}Ti{sub 5}O{sub 12}/CNF composite are prepared by simple sol-gel method under ultra-centrifugal force (65,000 N) followed by instantaneous annealing at 900 C for 3 min. A model hybrid capacitor cell consisting of a negative nc-Li{sub 4}Ti{sub 5}O{sub 12}/CNF composite electrode and a positive activated carbon electrode showed high energy density of 40 Wh L{sup -1} and high power density of 7.5 kW L{sup -1} comparable to conventional EDLCs. (author)

STATEMENT OF THE OPTIMIZATION PROBLEM OF CARBON PRODUCTS PRODUCTION

Directory of Open Access Journals (Sweden)

O. A. Zhuchenko

2016-08-01

Full Text Available The paper formulated optimization problem formulation production of carbon products. The analysis of technical and economic parameters that can be used to optimize the production of carbonaceous products had been done by the author. To evaluate the efficiency of the energy-intensive production uses several technical and economic indicators. In particular, the specific cost, productivity, income and profitability of production. Based on a detailed analysis had been formulated optimality criterion that takes into account the technological components of profitability. The components in detail the criteria and the proposed method of calculating non-trivial, one of them - the production cost of each product. When solving the optimization problem of technological modes of production into account constraints on the variables are optimized. Thus, restrictions may be expressed on the number of each product produced. Have been formulated the method of calculating the cost per unit of product. Attention is paid to the quality indices of finished products as an additional constraint in the optimization problem. As a result have been formulated the general problem of optimizing the production of carbon products, which includes the optimality criterion and restrictions.

Investigation of various synthetic conditions for large-scale synthesis and electrochemical properties of Li{sub 3.98}Al{sub 0.06}Ti{sub 4.96}O{sub 12}/C as anode material

Energy Technology Data Exchange (ETDEWEB)

Dong, Guo-Hui, E-mail: dgh1516@gmail.com [Shanghai Shanshan Tech Co., Ltd., 3158 Jinhai Road, Shanghai 201209 (China); Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240 (China); Liu, Hua-Jing; Zhou, Liang [Shanghai Shanshan Tech Co., Ltd., 3158 Jinhai Road, Shanghai 201209 (China); Shanghai Second Polytechnic University, 2360 Jinhai Road, Shanghai 201209 (China); Chong, Lina; Yang, Jun [Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240 (China); Qiao, Yong-Min; Zhang, Dian-Hao [Shanghai Shanshan Tech Co., Ltd., 3158 Jinhai Road, Shanghai 201209 (China)

2014-12-05

Graphical abstract: A gel and spray-drying method is demonstrated for large-scale preparation of Li{sub 3.98}Al{sub 0.06}Ti{sub 4.96}O{sub 12}/C secondary microspheres via optimizing various synthetic conditions. The electrochemical performances of the Li{sub 3.98}Al{sub 0.06}Ti{sub 4.96}O{sub 12}/C microspheres are investigated. - Highlights: • Various synthetic conditions are investigated. • Materials can be produced at ∼1 kg scale by using our demonstrated synthesis method. • Li{sub 3.98}Al{sub 0.06}Ti{sub 4.96}O{sub 12}/C sample possesses high electronic conductivity and rate property, and excellent cycling performance. • Secondary micro-spherical Li{sub 3.98}Al{sub 0.06}Ti{sub 4.96}O{sub 12}/C sample has high tap density et al. - Abstract: Poor electronic conductivity is one of the biggest obstacles for practical application of lithium titanate as lithium-ion battery anode material. Utilizing the advantages of coating and doping techniques to optimize the conductive and rate performances of lithium titanate was reported in this work. Herein, the effects of various synthetic conditions including calcination temperatures and holding times, lithium overdoses, carbon contents, doping contents and doping elements on phase, primary particles’ size and electrochemical performance were comprehensively investigated. The optimal Li{sub 3.98}Al{sub 0.06}Ti{sub 4.96}O{sub 12}/C secondary microspheres were synthesized, which possessed high electronic conductivity, tap density, reversible capacity and first columbic efficiency, and excellent rate performances. Furthermore, the synthesized samples were characterized by various techniques.

Hybrid Encapsulated Ionic Liquids for Post-Combustion Carbon Dioxide (CO<sub>2sub>) Capture

Energy Technology Data Exchange (ETDEWEB)

Brennecke, Joan F [Univ. of Texas, Austin, TX (United States); Degnan, Jr, Thomas Francis [Univ. of Notre Dame, IN (United States); McCready, Mark J. [Univ. of Notre Dame, IN (United States); Stadtherr, Mark A. [Univ. of Texas, Austin, TX (United States); Stolaroff, Joshua K [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ye, Congwang [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-11-03

Ionic liquids (ILs) and Phase Change Ionic Liquids (PCILs) are excellent materials for selective removal of carbon dioxide from dilute post-combustion streams. However, they are typically characterized as having high viscosities, which impairs their effectiveness due to mass transfer limitations, caused by the high viscosities. In this project, we are examining the benefits of encapsulating ILs and PCILs in thin polymeric shells to produce particles of approximately 100 to 600 µm in diameter that can be used in a fluidized bed absorber. The particles are produced by microencapsulation of the ILs and PCILs in CO<sub>2sub>-permeable polymer shells. Here we report on the encapsulation of the IL and PCIL materials, thermodynamic testing of the encapsulated materials, mass transfer measurements in both a fluidized bed and a packed bed, determination of the effect of impurities (SO<sub>2sub>, NO<sub>x> and water) on the free and encapsulated IL and PCIL, recyclability of the CO<sub>2sub> uptake, selection and synthesis of kg quantities of the IL and PCIL, identification of scale-up methods for encapsulation and production of a kg quantity of the PCIL, construction and shakedown of the laboratory scale unit to test the encapsulated particles for CO<sub>2sub> capture ability and efficiency, use of our mass transfer model to predict mass transfer and identify optimal properties of the encapsulated particles, and initial testing of the encapsulated particles in the laboratory scale unit. We also show our attempts at developing shell materials that are resistant to water permeation. Overall, we have shown that the selected IL and PCIL can be successfully encapsulated in polymer shells and the methods scaled up to production levels. The IL/PCIL and encapsulated IL/PCIL react irreversibly with SO<sub>2sub> and NO<sub>x> so the CO<sub>2sub> capture unit would need to be placed after the flue gas desulfurization and NO<sub>x> reduction units. However

Removal mechanism of selenite by Fe{sub 3}O{sub 4}-precipitated mesoporous magnetic carbon microspheres

Energy Technology Data Exchange (ETDEWEB)

Lu, Jianwei; Fu, Fenglian, E-mail: fufenglian2006@163.com; Ding, Zecong; Li, Na; Tang, Bing

2017-05-15

Highlights: • MCMSs were prepared via green hydrothermal carbonization and coprecipitation. • MCMSs displayed effective removal of Se(IV) from wastewater. • Se(IV) formed inner-sphere complexes with MCMSs and was reduced to insoluble Se{sup 0}. • MCMSs can be easily separated and recycled by an external magnetic field. - Abstract: A mesoporous composite of magnetic carbon microspheres (MCMSs) was synthesized via introducing Fe{sub 3}O{sub 4} nanoscale particles to the surface of carbon microspheres (CMSs) by coprecipitation. Scanning electron microscopy and transmission electron microscopy showed the Fe{sub 3}O{sub 4} nanoscale particles were dispersedly immobilized on the surface of CMSs. The MCMSs demonstrated effective removal of selenite (Se(IV)) from wastewater. MCMSs showed the regular pattern where the lower pH value, the lower residual Se(IV) concentration. The coexisting sulfate, nitrate, chloride, carbonate, and silicate had no significant effect on Se(IV) removal, whereas phosphate hindered the removal of Se(IV) by competing with Se(IV) and formed inner–sphere complexes with Fe{sub 3}O{sub 4} on the surface of MCMSs. Through X–ray photoelectron spectroscopy analysis, Se(IV) can not only form inner–sphere complexes with MCMSs, but also be reduced to insoluble elemental selenium (Se{sup 0}) by Fe{sub 3}O{sub 4} which was oxidized and formed γ–Fe{sub 2}O{sub 3}. Moreover, the superparamagnetic MCMSs can be easily separated from solution by means of an external magnetic field. The high removal efficiency for Se(IV) and rapid separability of MCMSs made them promising materials for the application in the practice.

Conformationally superarmed S-ethyl glycosyl donors as effective building blocks for chemoselective oligosaccharide synthesis in one pot

DEFF Research Database (Denmark)

Bandara, Mithila D.; Yasomanee, Jagodige P.; Rath, Nigam P.

2017-01-01

A new series of superarmed glycosyl donors has been investigated. It was demonstrated that the S-ethyl leaving group allows for high reactivity, which is much higher than that of equally equipped S-phenyl glycosyl donors that were previously investigated by our groups. The superarmed S......-ethyl glycosyl donors equipped with a 2-O-benzoyl group gave complete β-stereoselectivity. Utility of the new glycosyl donors has been demonstrated in a one-pot one-addition oligosaccharide synthesis with all of the reaction components present from the beginning...

Microbial O{sub 2} consumption in the Aespoe tunnel

Energy Technology Data Exchange (ETDEWEB)

Kotelnikova, S.; Pedersen, Karsten [Goeteborg Univ. (Sweden). Dept. of Cell and Molecular Biology, Microbiology

1998-04-01

The report presents data on microbial O{sub 2} reduction activities by microorganisms obtained with different techniques: Winkler method, gas chromatography, most probable numbering, enrichment technique, inhibitor analysis and radiotracer measurements. The samples were collected from boreholes and open funnel ponds at Aespoe in 1996-1998. The evaluation of the microbial activities in open ponds predicts the future microbial activities after the O{sub 2} intrusion around the future repository. The metabolic potential of the microbial population inhabiting groundwater was evaluated on the basis of electron donors available and microbial 16S rRNA gene diversity. The contribution of different microbial groups to the O{sub 2} reduction was elucidated using specific inhibitors selectively affecting different microbial groups. Our experiments show that microbial O{sub 2} reduction occurs in deep groundwater. Carbon dioxide was produced concurrently with O{sub 2} reduction confirming the biogenic nature of the reduction. The populations developed O{sub 2} reduction rates and capacity depending on the initial concentration of dissolved O{sub 2} reduction. Rates of O{sub 2} reduction ranged from 0.32 to 4.5 {mu}M/day. Depending on temperature and the type of groundwater the approximate time needed for consumption of 500 {mu}M of dissolved O{sub 2} ranged from 0.31 to 3.99 years. After approximately a 2 weeks period the microbial population in vitro was able to consume O{sub 2} both at 30 deg C and 60 deg C. At 16 deg C no delay in O{sub 2} consumption was observed. Our results demonstrated that methanotrophs survive in deep groundwater and that they were induced by O{sub 2}. Some bacteria use Hg or CH{sub 4} as electron donor instead of organic matter, which means that microbial O{sub 2} reduction will occur also in deep groundwaters where the availability of organic carbon is limited. Specific CH{sub 4} oxidation rates ranged between 3.00 and 220 nM CH{sub 4} per litre per

Spray drying of spherical Li{sub 4}Ti{sub 5}O{sub 12}/C powders using polyvinyl pyrrolidone as binder and carbon source

Energy Technology Data Exchange (ETDEWEB)

Liu, Wei [Research Center for New Energy Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China); University of Chinese Academy of Sciences, Beijing 110049 (China); Shanghai Nanotechnology Promotion Center, Shanghai 200237 (China); Wang, Qian; Cao, Chunhui [Research Center for New Energy Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China); University of Chinese Academy of Sciences, Beijing 110049 (China); Han, Xuewu [Research Center for New Energy Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China); Zhang, Jian, E-mail: zjskycn@163.com [Research Center for New Energy Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China); Xie, Xiaohua, E-mail: xiaohuaxie@126.com [Research Center for New Energy Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China); Xia, Baojia [Research Center for New Energy Technology, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China); University of Chinese Academy of Sciences, Beijing 110049 (China)

2015-02-05

Highlights: • The spherical Li{sub 4}Ti{sub 5}O{sub 12}/C granules were prepared by spray drying. • Polyvinyl pyrrolidone (PVP) was used as binder and carbon source. • Tap density and spherical structure increase with the increase of PVP content. • Li{sub 4}Ti{sub 5}O{sub 12}/C granules exhibits better rate capability and excellent cyclability. - Abstract: Polyvinyl pyrrolidone (PVP) was used as binder and carbon source to synthesize stable and spherical Li{sub 4}Ti{sub 5}O{sub 12}/C granules by spray drying. The effects of PVP content and atmospheres on the properties of Li{sub 4}Ti{sub 5}O{sub 12} were investigated. The obtained samples were characterized by X-ray diffraction, scanning electron microscopy, Raman spectroscopy, and electrochemical tests, respectively. The results indicate that the average particle size, tap density and degree of spherical structure increase accordingly to the increase of PVP content. However, the large secondary particle would deteriorate the rate capacity at high current density. The carbon coating could significantly improve the rate capacity, which is attributed to the smaller primary particle and higher electrical conductivity.

Geochemical alteration of wellbore cement by CO<sub>2sub> or CO<sub>2sub>+H <sub>2sub> S reaction during long-term carbon storage: Original Research Article: Geochemical alteration of wellbore cement by CO<sub>2sub>

Energy Technology Data Exchange (ETDEWEB)

Um, Wooyong [Pacific Northwest National Laboratory, Richland WA USA; Rod, Kenton A. [Pacific Northwest National Laboratory, Richland WA USA; Jung, Hun Bok [New Jersey City University, Jersey City NJ USA; Brown, Christopher F. [Pacific Northwest National Laboratory, Richland WA USA

2016-03-22

Cement samples were reacted with CO<sub>2sub>-saturated groundwater, with or without added H2S (1 wt.%), at 50°C and 10 MPa for up to 13 months (CO<sub>2sub> only) or for up to 3.5 months (CO<sub>2sub> + H<sub>2sub>S) under static conditions. After the reaction, X-ray computed tomography images revealed that calcium carbonate precipitation (CaCO<sub>3sub>) occurred extensively within the fractures in the cement matrix, but only partially along fractures at the cement-basalt interface. Exposure of a fractured cement sample to CO2-saturated groundwater (50°C and 10 MPa) over a period of 13 months demonstrated progressive healing of cement fractures by CaCO<sub>3sub>(s) precipitation. After reaction with CO<sub>2sub> + H<sub>2sub>S-saturated groundwater, CaCO<sub>3sub> (s) precipitation also occurred more extensively within the cement fracture than along the cement-basalt caprock interfaces. X-ray diffraction analysis showed that major cement carbonation products of the CO<sub>2sub> + H<sub>2sub>S-saturated groundwater were calcite, aragonite, and vaterite, all consistent with cement carbonation by CO<sub>2sub>-saturated groundwater. While pyrite is thermodynamically favored to form, due to the low H<sub>2sub>S concentration it was not identified by XRD in this study. The cement alteration rate into neat Portland cement columns by CO<sub>2sub>-saturated groundwater was similar at ~0.02 mm/d, regardless of the cement-curing pressure and temperature (P-T) conditions, or the presence of H<sub>2sub>S in the brine. The experimental results imply that the wellbore cement with fractures is likely to be healed during exposure to CO<sub>2sub>- or CO<sub>2sub> + H<sub>2sub>S-saturated groundwater, whereas fractures along the cement-caprock interface are likely to remain open and vulnerable to the leakage of CO<sub>2sub>.

Hierarchically structured carbon-coated SnO{sub 2}-Fe{sub 3}O{sub 4} microparticles with enhanced lithium storage performance

Energy Technology Data Exchange (ETDEWEB)

Chai, Xiaohan; Shi, Chunsheng [School of Materials Science and Engineering and Tianjin Key Laboratory of Composites and Functional Materials, Tianjin University, Tianjin, 300072 (China); Liu, Enzuo [School of Materials Science and Engineering and Tianjin Key Laboratory of Composites and Functional Materials, Tianjin University, Tianjin, 300072 (China); Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300072 (China); Li, Jiajun [School of Materials Science and Engineering and Tianjin Key Laboratory of Composites and Functional Materials, Tianjin University, Tianjin, 300072 (China); Zhao, Naiqin [School of Materials Science and Engineering and Tianjin Key Laboratory of Composites and Functional Materials, Tianjin University, Tianjin, 300072 (China); Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300072 (China); Key Laboratory of Advanced Ceramics and Machining Technology, Ministry of Education, Tianjin University, Tianjin, 300072 (China); He, Chunnian, E-mail: cnhe08@tju.edu.cn [School of Materials Science and Engineering and Tianjin Key Laboratory of Composites and Functional Materials, Tianjin University, Tianjin, 300072 (China); Collaborative Innovation Center of Chemical Science and Engineering, Tianjin 300072 (China); Key Laboratory of Advanced Ceramics and Machining Technology, Ministry of Education, Tianjin University, Tianjin, 300072 (China)

2016-01-15

Graphical abstract: Hierarchically structured SnO{sub 2}-Fe{sub 3}O{sub 4}@C microparticles for lithium-ion battery anode are developed by a facile and scalable strategy. - Highlights: • Hierarchically structured SnO{sub 2}-Fe{sub 3}O{sub 4}@C micrometer-sized particles were synthesized. • The SnO{sub 2}-Fe{sub 3}O{sub 4}@C micrometer-sized particles deliver high reversible lithium storage capacity. • The wrapped carbon layer can buffer the volume expansion of SnO{sub 2}-Fe{sub 3}O{sub 4}. - Abstract: A facile and scalable strategy was developed to fabricate SnO{sub 2}-Fe{sub 3}O{sub 4}@C micrometer-sized particles as a good lithium-ion battery anode. The obtained materials were constructed by aggregated nanoclusters (100–200 nm) consisting of SnO{sub 2}-Fe{sub 3}O{sub 4}@C nanospheres (20 ∼ 30 nm), in which SnO{sub 2} and Fe{sub 3}O{sub 4} nanoparticles (5 ∼ 8 nm) were homogeneously embedded in a percolating carbonaceous network with an average thickness of about 3 nm. SnO{sub 2}-Fe{sub 3}O{sub 4}@C microparticles were synthesized by a one-pot hydrothermal process followed by annealing under Ar and subsequent chemical vapor transformation (CVT) under vacuum. The peculiar strategy allows to obtain hierarchical structure of micrometer-sized particles including nanospheres, nanoclusters and micro-scale particles, and the combination of SnO{sub 2} and Fe{sub 3}O{sub 4} could promote the synergistic effects to enhance the reversible capacity as well as the structural stability. Meanwhile, the carbon layer, homogeneously covering the nanoparticles does not only accommodate the volume change of active materials to maintain the structural integrity but also forms a conductive network throughout the whole micro-sized structure during charge/discharge processes. As a result, the electrode of SnO{sub 2}-Fe{sub 3}O{sub 4}@C microparticles exhibits good rate performance (1056 mAh g{sup −1} at 0.1 C, 734 mAh g{sup −1} at 0.2 C, 449 mAh g{sup −1} at 0.5 C, 212

Accelerated Carbonation of Steel Slags Using CO{sub 2} Diluted Sources: CO{sub 2} Uptakes and Energy Requirements

Energy Technology Data Exchange (ETDEWEB)

Baciocchi, Renato, E-mail: baciocchi@ing.uniroma2.it; Costa, Giulia [Department of Civil Engineering and Computer Science Engineering, University of Rome “Tor Vergata”, Rome (Italy); Polettini, Alessandra; Pomi, Raffaella; Stramazzo, Alessio [Department of Civil and Environmental Engineering, University of Rome “La Sapienza”, Rome (Italy); Zingaretti, Daniela [Department of Civil Engineering and Computer Science Engineering, University of Rome “Tor Vergata”, Rome (Italy)

2016-01-18

This work presents the results of carbonation experiments performed on Basic Oxygen Furnace (BOF) steel slag samples employing gas mixtures containing 40 and 10% CO{sub 2} vol. simulating the gaseous effluents of gasification and combustion processes respectively, as well as 100% CO{sub 2} for comparison purposes. Two routes were tested, the slurry-phase (L/S = 5 l/kg, T = 100°C and Ptot = 10 bar) and the thin-film (L/S = 0.3–0.4 l kg, T = 50°C and Ptot = 7–10 bar) routes. For each one, the CO{sub 2} uptake achieved as a function of the reaction time was analyzed and on this basis, the energy requirements associated with each carbonation route and gas mixture composition were estimated considering to store the CO{sub 2} emissions of a medium size natural gas fired power plant (20 MW). For the slurry-phase route, maximum CO{sub 2} uptakes ranged from around 8% at 10% CO{sub 2}, to 21.1% (BOF-a) and 29.2% (BOF-b) at 40% CO{sub 2} and 32.5% (BOF-a) and 40.3% (BOF-b) at 100% CO{sub 2}. For the thin-film route, maximum uptakes of 13% (BOF-c) and 19.5% (BOF-d) at 40% CO{sub 2}, and 17.8% (BOF-c) and 20.2% (BOF-d) at 100% were attained. The energy requirements of the two analyzed process routes appeared to depend chiefly on the CO{sub 2} uptake of the slag. For both process route, the minimum overall energy requirements were found for the tests with 40% CO{sub 2} flows (i.e., 1400−1600 MJ/t{sub CO{sub 2}} for the slurry-phase and 2220 – 2550 MJ/t{sub CO{sub 2}} for the thin-film route).

Electrodeposition of In{sub 2}O{sub 3} thin films from a dimethylsulfoxide based electrolytic solution

Energy Technology Data Exchange (ETDEWEB)

Henriquez, R.; Munoz, E.; Gomez, H. [Instituto de Quimica, Facultad de Ciencias, Pontificia Universidad Catolica de Valparaiso, Curauma Valparaiso (Chile); Dalchiele, E.A.; Marotti, R.E. [Instituto de Fisica and CINQUIFIMA, Facultad de Ingenieria, Montevideo (Uruguay); Martin, F.; Leinen, D.; Ramos-Barrado, J.R. [Laboratorio de Materiales y Superficie, Departamento de Fisica Aplicada and Ingenieria Quimica, Universidad de Malaga (Spain)

2013-02-15

Indium (III) oxide (In{sub 2}O{sub 3}) thin films have been obtained after heat treatment of In(OH){sub 3} precursor layers grown by a potential cycling electrodeposition (PCED) method from a dimethylsulfoxide (DMSO) based electrolytic solution onto fluorine-doped tin oxide (FTO) coated glass substrates. X-ray diffraction (XRD) measurements indicate the formation of a polycrystalline In{sub 2}O{sub 3} phase with a cubic structure. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) showed a smooth morphology of the In{sub 2}O{sub 3} thin films after an optimized heat treatment had been developed. The surface composition and chemical state of the semiconductor films was established by X-ray photoelectron spectroscopy analysis. The nature of the semiconductor material, flat band potential and donor density were determined from Mott-Schottky plots. This study reveals that the In{sub 2}O{sub 3} films exhibited n-type conductivity with an average donor density of 2.2 x 10{sup 17} cm{sup -3}. The optical characteristics were determined through transmittance spectra. The direct and indirect band gap values obtained are according to the accepted values for the In{sub 2}O{sub 3} films of 2.83 and 3.54 eV for the indirect and direct band gap values. (Copyright copyright 2013 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Enhanced adsorption of chromium onto activated carbon by microwave-assisted H{sub 3}PO{sub 4} mixed with Fe/Al/Mn activation

Energy Technology Data Exchange (ETDEWEB)

Sun, Yuanyuan [Shandong Provincial Key Laboratory of Water Pollution Control and Resource Reuse, School of Environmental Science and Engineering, Shandong University, Jinan 250100 (China); Yue, Qinyan, E-mail: qyyue58@aliyun.com [Shandong Provincial Key Laboratory of Water Pollution Control and Resource Reuse, School of Environmental Science and Engineering, Shandong University, Jinan 250100 (China); Mao, Yanpeng [School of Energy and Power Engineering, Shandong University, Jinan 250100 (China); Gao, Baoyu; Gao, Yuan; Huang, Lihui [Shandong Provincial Key Laboratory of Water Pollution Control and Resource Reuse, School of Environmental Science and Engineering, Shandong University, Jinan 250100 (China)

2014-01-30

Highlights: • FeCl{sub 3}, AlCl{sub 3} and MnCl{sub 2} were used as the assisted activator to produce carbons. • Doping with MnCl{sub 2} was favorable for the enlargement of activated carbon. • The assisted activator had good performance for holding more fixed carbon. • The maximum adsorption capacities followed the order of AC-Fe > AC-Al > AC-Mn > AC. • The XPS analysis was used to confirm the adsorption/transformation mechanism. -- Abstract: FeCl{sub 3}, AlCl{sub 3} and MnCl{sub 2} were used as the assisted activation agent in activated carbon preparation by H{sub 3}PO{sub 4} activation using microwave heating method. The physico-chemical properties of activated carbons were investigated by scanning electron microscope (SEM), N{sub 2} adsorption/desorption, Boehm's titration, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). To investigate the adsorption performances of chromium onto these newly developed activated carbons, a batch of experiments were performed under different adsorption conditions: solution pH, initial Cr(VI) ion concentration, contact time and co-existing ions. The results suggested that carbon with MnCl{sub 2} as assisted activation agent displayed the highest BET surface area (1332 m{sup 2}/g) and the highest pore volume (1.060 cm{sup 3}/g). FeCl{sub 3}, AlCl{sub 3} and MnCl{sub 2} had successfully improved Cr(VI) adsorption and activated carbon with FeCl{sub 3} as assisted activation agent exhibited the best uptake capacity. To study the transformation of Cr(VI) in adsorption process, total chromium in the aqueous solution was also recorded. The ratio of the amount of Cr(VI) to Cr(III) on each adsorbent was explained by XPS analysis results. Both the co-existing salts (Na{sub 2}SO{sub 4} and NaNO{sub 3}) demonstrated promoted effects on Cr(VI) removal by four carbons. The pseudo-second-order model and Freundlich equation displayed a good correlation with

Embedding nano-Li{sub 4}Ti{sub 5}O{sub 12} in hierarchical porous carbon matrixes derived from water soluble polymers for ultra-fast lithium ion batteries anodic materials

Energy Technology Data Exchange (ETDEWEB)

Lan, Chun-Kai; Bao, Qi; Huang, Yao-Hui; Duh, Jenq-Gong, E-mail: jgd@mx.nthu.edu.tw

2016-07-15

Li{sub 4}Ti{sub 5}O{sub 12}/hierarchical porous carbon matrixes composites are successfully prepared by a facile and fast polymers assisted sol–gel method, aiming to promote both electronic and ionic conductivity. As indicated by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis, three less expensive cost and available water soluble polymers (e.g. PAA, CMC, and SA) can homogeneously react with Li–Ti–O precursor to incorporate into interior of nano-scale lithium titanate and provide a continues conductive network after pyrolysis. In addition, the results of scanning electron microscopy and transmission electron microscopy also prove that the Li{sub 4}Ti{sub 5}O{sub 12} nanoparticles are firmly embedded in porous carbon matrix with no obvious agglomeration. EIS measurement and cyclic voltammetry further reveal that the facilitated electrode kinetics and better ionic transport of Li{sub 4}Ti{sub 5}O{sub 12}/hierarchical porous carbon matrixes composites than that of Li{sub 4}Ti{sub 5}O{sub 12}. The c-CMC-LTO exhibits a superior capacity of 92 mAh g{sup −1} and retains its initial value with no obviously capacity decay over 200 cycles under an ultra-high C rate (50 C). - Graphical abstract: Schematic illustrations of the formation process of embedding LTO into Carbon matrixes derived from water soluable polymers (upper) and the electrochemical reaction paths in LTO/Carbon composites during charging/discharging processes (lower). - Highlights: • Hierarchical porous carbon matrixes were used to improve the Li{sub 4}Ti{sub 5}O{sub 12} anodes. • Carbon matrixes could suppress the agglomeration of Li{sub 4}Ti{sub 5}O{sub 12} nanoparticles. • meso-nanoporous carbon structure was beneficial for filtration of electrolyte. • The c-CMC-LTO exhibited superior high rate capability and cycling durability.

X-ray crystal and molecular structure of (eta/sup 5/C/sub 5/H/sub 5/)UCl/sub 3/. 2PPh/sub 3/O thf: trichloro (eta/sup 5/cyclopentadienyl)bis(triphenylphosphine oxide) uranium(IV). thf

Energy Technology Data Exchange (ETDEWEB)

Bombieri, G; De Paoli, G [Consiglio Nazionale delle Ricerche, Padua (Italy). Lab. di Chimica e Tecnologia dei Radioelementi; Del Pra, A; Bagnall, K W

1978-01-01

Following reports of the preparation of (eta/sup 5/C/sub 5/H/sub 5/)UCl/sub 3/.xL (x = 1, L = dimethoxyethane and x = 2, L = tetrahydrofuran (thf), a series of analogous oxygen-donor complexes were isolated. This paper describes the crystal and molecular structure of one of them, ((eta/sup 5/C/sub 5/H/sub 5/)UCl/sub 3/.2PPh/sub 3/O)thf.

Investigation of the properties of carbon-base nanostructures doped YBa{sub 2}Cu{sub 3}O{sub 7−δ} high temperature superconductor

Energy Technology Data Exchange (ETDEWEB)

Dadras, Sedigheh, E-mail: dadras@alzahra.ac.ir; Ghavamipour, Mahshid

2016-03-01

In this research, we have investigated the effects of three samples of carbon-base nanostructures (carbon nanoparticles, carbon nanotubes and silicon carbide nanoparticles) doping on the properties of Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub 7−δ} (YBCO) high temperature superconductor. The pure and doped YBCO samples were synthesized by sol–gel method and characterized by resistivity versus temperature (ρ–T), current versus voltage (I–V), through X-ray diffraction (XRD) and scanning electron microscope (SEM) analysis. The results confirmed that for all the samples, the orthorhombic phase of YBCO compound is formed. We found that the pinning energy and critical current density of samples increase by adding carbon nanostructures to YBCO compound. Also critical temperature is improved by adding carbon nanotubes to YBCO compound, while it does not change much for carbon and silicon carbide nanoparticles doped compounds. Furthermore, the samples were characterized by UV–vis spectroscopy in 300 K and the band gap of the samples was determined. We found that the carbon nanotubes doping decreases YBCO band gap in normal state from 1.90 eV to 1.68 eV, while carbon and SiC nanoparticles doping increases it to 2.20 and 3.37 eV respectively.

Optimization of process parameters and catalyst compositions in carbon dioxide oxidative coupling of methane over CaO-MnO/CeO{sub 2} catalyst using response surface methodology

Energy Technology Data Exchange (ETDEWEB)

Istadi,; Amin, Nor Aishah Saidina [Chemical Reaction Engineering Group (CREG), Faculty of Chemical and Natural Resources Engineering, Universiti Teknologi Malaysia, UTM Skudai, Johor Bahru (81310 Malaysia)

2006-05-15

The optimization of process parameters and catalyst compositions for the CO{sub 2} oxidative coupling of methane (CO{sub 2}-OCM) reaction over CaO-MnO/CeO{sub 2} catalyst was developed using Response Surface Methodology (RSM). The relationship between the responses, i.e. CH{sub 4} conversion, C{sub 2} hydrocarbons selectivity or yield, with four independent variables, i.e. CO{sub 2}/CH{sub 4} ratio, reactor temperature, wt.% CaO and wt.% MnO in the catalyst, were presented as empirical mathematical models. The maximum C{sub 2} hydrocarbons selectivity and yields of 82.62% and 3.93%, respectively, were achieved by the individual-response optimization at the corresponding optimal process parameters and catalyst compositions. However, the CH{sub 4} conversion was a saddle function and did not show a unique optimum as revealed by the canonical analysis. Moreover pertaining to simultaneous multi-responses optimization, the maximum C{sub 2} selectivity and yield of 76.56% and 3.74%, respectively, were obtained at a unique optimal process parameters and catalyst compositions. It may be deduced that both individual- and multi-responses optimizations are useful for the recommendation of optimal process parameters and catalyst compositions for the CO{sub 2}-OCM process. (author)

CO{sub 2} capture by adsorption with nitrogen enriched carbons

Energy Technology Data Exchange (ETDEWEB)

M.G. Plaza; C. Pevida; A. Arenillas; F. Rubiera; J.J. Pis [Instituto Nacional del Carbon (CSIC), Oviedo (Spain)

2007-09-15

The success of CO{sub 2} capture with solid sorbents is dependent on the development of a low cost sorbent with high CO{sub 2} selectivity and adsorption capacity. Immobilised amines are expected to offer the benefits of liquid amines in the typical absorption process, with the added advantages that solids are easy to handle and that they do not give rise to corrosion problems. In this work, different alkylamines were evaluated as a potential source of basic sites for CO{sub 2} capture, and a commercial activated carbon was used as a preliminary support in order to study the effect of the impregnation. The amine coating increased the basicity and nitrogen content of the carbon. However, it drastically reduced the microporous volume of the activated carbon, which is chiefly responsible for CO{sub 2} physisorption, thus decreasing the capacity of raw carbon at room temperature. 33 refs., 7 figs., 3 tabs.

Effect of carbon dioxide and bicarbonate as inorganic carbon sources on growth and adaptation of autohydrogenotrophic denitrifying bacteria

Energy Technology Data Exchange (ETDEWEB)

Ghafari, Shahin; Hasan, Masitah [Department of Chemical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia); Aroua, Mohamed Kheireddine [Department of Chemical Engineering, Faculty of Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia)], E-mail: mk_aroua@um.edu.my

2009-03-15

Acclimation of autohydrogenotrophic denitrifying bacteria using inorganic carbon source (CO{sub 2} and bicarbonate) and hydrogen gas as electron donor was performed in this study. In this regard, activated sludge was used as the seed source and sequencing batch reactor (SBR) technique was applied for accomplishing the acclimatization. Three distinct strategies in feeding of carbon sources were applied: (I) continuous sparging of CO{sub 2}, (II) bicarbonate plus continuous sparging of CO{sub 2}, and (III) only bicarbonate. The pH-reducing nature of CO{sub 2} showed an unfavorable impact on denitrification rate; however bicarbonate resulted in a buffered environment in the mixed liquor and provided a suitable mean to maintain the pH in the desirable range of 7-8.2. As a result, bicarbonate as the only carbon source showed a faster adaptation, while carbon dioxide as the only carbon source as well as a complementary carbon source added to bicarbonate resulted in longer acclimation period. Adapted hydrogenotrophic denitrifying bacteria, using bicarbonate and hydrogen gas in the aforementioned pH range, caused denitrification at a rate of 13.33 mg NO{sub 3}{sup -}-N/g MLVSS/h for degrading 20 and 30 mg NO{sub 3}{sup -}-N/L and 9.09 mg NO{sub 3}{sup -}-N/g MLVSS/h for degrading 50 mg NO{sub 3}{sup -}-N/L.

Optimization of sulfamethoxazole degradation by TiO{sub 2}/hydroxyapatite composite under ultraviolet irradiation using response surface methodology

Energy Technology Data Exchange (ETDEWEB)

Chun, Suk Young; Kim, Ji Tae; Chang, Soon Woong [Kyonggi University, Suwon (Korea, Republic of); An, Sang Woo [Hanyang University, Seoul (Korea, Republic of); Lee, Si Jin [Korea Environment Corporation, Incheon (Korea, Republic of)

2014-06-15

A titanium dioxide/hydroxyapatite/ultraviolet (TiO{sub 2}/HAP/UV-A) system was used to remove sulfamethoxazole (SMX) from water in a second-order response surface methodology (RSM) experiment with a three-level Box-Behnken design (BBD) for optimization. The effects of both the primary and secondary interaction effects of three photocatalytic reaction variables were examined: the concentration of SMX (X{sub 1}), dose of TiO{sub 2}/HAP composite (X{sub 2}), and UV intensity (X{sub 3}). The UV intensity and TiO{sub 2}/HAP dose significantly influence the SMX and total organic carbon (TOC) removal (p<0.001). However, the SMX and TOC removal are enhanced with increasing TiO{sub 2}/HAP dose up to certain levels, and further increases in the TiO{sub 2}/HAP dose result in adverse effects due to hydroxyl radical scavenging at higher catalyst concentrations. Complete removal of SMX was achieved upon UV-A irradiation for 180 min. Under optimal conditions, 51.2% of the TOC was removed, indicating the formation of intermediate products during SMX degradation. The optimal ratio of SMX (mg L{sup -1}) to TiO{sub 2}/HAP (g L{sup -1}) to UV (W/L) was 5.4145 mg L{sup -1} to 1.4351 g L{sup -1} to 18 W for both SMX and TOC removal. By comparison with actual applications, the experimental results were found to be in good agreement with the model's predictions, with mean results for SMX and TOC removal of 99.89% and 51.01%, respectively.

Continuing Studies on Direct Aqueous Mineral Carbonation of CO{sub 2} Sequestration

Energy Technology Data Exchange (ETDEWEB)

O' Connor, W.K.; Dahlin, D.C.; Nilsen, D.N.; Gerdemann, S.J.; Rush, G.E.; Penner, L.R.; Walters, R.P.; Turner, P.C.

2002-03-04

Direct aqueous mineral carbonation has been investigated as a process to convert gaseous CO{sub 2} into a geologically stable, solid final form. The process utilizes a solution of sodium bicarbonate (NaHCO{sub 3}), sodium chloride (NaCl), and water, mixed with a mineral reactant, such as olivine (Mg{sub 2}SiO{sub 4}) or serpentine [Mg{sub 3}Si{sub 2}O{sub 5}(OH){sub 4}]. Carbon dioxide is dissolved into this slurry, by diffusion through the surface and gas dispersion within the aqueous phase. The process includes dissolution of the mineral and precipitation of the magnesium carbonate mineral magnesite (MgCO{sub 3}) in a single unit operation. Activation of the silicate minerals has been achieved by thermal and mechanical means, resulting in up to 80% stoichiometric conversion of the silicate to the carbonate within 30 minutes. Heat treatment of the serpentine, or attrition grinding of the olivine and/or serpentine, appear to activate the minerals by the generation of a non-crystalline phase. Successful conversion to the carbonate has been demonstrated at ambient temperature and relatively low (10 atm) partial pressure of CO{sub 2} (P{sub CO2}). However, optimum results have been achieved using the bicarbonate-bearing solution, and high P{sub CO2}. Specific conditions include: 185 C; P{sub CO2}=150 atm; 30% solids. Studies suggest that the mineral dissolution rate is not solely surface controlled, while the carbonate precipitation rate is primarily dependent on the bicarbonate concentration of the slurry. Current and future activities include further examination of the reaction pathways and pretreatment options, the development of a continuous flow reactor, and an evaluation of the economic feasibility of the process.

Tailings and mineral carbonation : the potential for atmospheric CO{sub 2} sequestration

Energy Technology Data Exchange (ETDEWEB)

Rollo, H.A. [Lorax Environmental Services Ltd., Vancouver, BC (Canada); Jamieson, H.E. [Queen' s Univ., Kingston, ON (Canada). Dept. of Geological Sciences and Geological Engineering; Lee, C.A. [Dillon Consulting Ltd., Cambridge, ON (Canada)

2009-02-15

Carbon dioxide (CO{sub 2}) sequestration includes geological storage, ocean storage, organic storage, and mineral storage (mineral carbonation). This presentation discussed tailings and mineral carbonation and the potential for atmospheric CO{sub 2} sequestration. In particular, it outlined CO{sub 2} sequestration and presented a history of investigations. The Ekati Diamond Mine was discussed with particular reference to its location, geology, and processing. Other topics that were presented included mineralogy; water chemistry; modeling results; and estimates of annual CO{sub 2} sequestration. Conclusions and implications were also presented. It was concluded that ore processing at mines with ultramafic host rocks have the potential to partially offset CO{sub 2} emissions. In addition, it was found that existing tailings at ultramafic deposits may be viable source materials for CO{sub 2} sequestration by mineral carbonation. tabs., figs.

Innovative nanoporous carbons with ultrahigh uptakes for capture and reversible storage of CO{sub 2} and volatile iodine

Energy Technology Data Exchange (ETDEWEB)

Sun, Hanxue; La, Peiqing [College of Petrochemical Technology, Lanzhou University of Technology, Langongping Road 287, Lanzhou 730050, PR China (China); Yang, Ruixia [State Key Laboratory of Molecular Reaction Dynamics, Dalian National Laboratory for Clean Energy, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); Zhu, Zhaoqi; Liang, Weidong; Yang, Baoping [College of Petrochemical Technology, Lanzhou University of Technology, Langongping Road 287, Lanzhou 730050, PR China (China); Li, An, E-mail: lian2010@lut.cn [College of Petrochemical Technology, Lanzhou University of Technology, Langongping Road 287, Lanzhou 730050, PR China (China); Deng, Weiqiao, E-mail: dengwq@dicp.ac.cn [State Key Laboratory of Molecular Reaction Dynamics, Dalian National Laboratory for Clean Energy, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China)

2017-01-05

Highlights: • Cigarette filter was utilized to prepare highly porous carbons as super absorbents. • The porous carbons exhibit excellent iodine uptake. • The porous carbons show high CO{sub 2} adsorption capacity of 6.0 mmol g{sup −1} at 273 K. - Abstract: Porous carbons as solid-state adsorbents have recently attracted considerable interest in the areas of storage and capture of CO{sub 2} as well as the adsorption of radioactive matters. In this work, cigarette butts, one kind of common wastes referring to the filters, were utilized to prepare highly porous carbons by KOH activation in argon atmosphere. The resulting porous carbon shows a high specific surface area of up to 2751 m{sup 2} g{sup −1} with abundant micropores. The resulting porous carbon exhibits excellent iodine uptake of 262 wt% and high CO{sub 2} adsorption capacity of 6.0 mmol g{sup −1} at ambient pressure and 273 K, which both are among the highest values reported to date. Given these excellent iodine uptake, CO{sub 2} adsorption capacity, ease of preparation as well as good physiochemical stability, the porous carbons derived from cigarette butts show great potential in the reversible adsorption of radioactive iodine and CO{sub 2}.

Factors influencing liver and spleen volume changes after donor hepatectomy for living donor liver transplantation

Energy Technology Data Exchange (ETDEWEB)

Bae, Ji Hee; Ryeom, Hunku; Song, Jung Hup [Kyungpook National University Hospital, Daegu (Korea, Republic of)

2013-11-15

To define the changes in liver and spleen volumes in the early postoperative period after partial liver donation for living-donor liver transplantation (LDLT) and to determine factors that influence liver and spleen volume changes. 27 donors who underwent partial hepatectomy for LDLT were included in this study. The rates of liver and spleen volume change, measured with CT volumetry, were correlated with several factors. The analyzed factors included the indocyanine green (ICG) retention rate at 15 minutes after ICG administration, preoperative platelet count, preoperative liver and splenic volumes, resected liver volume, resected-to-whole liver volume ratio (LV{sub R}/LV{sub W}), resected liver volume to the sum of whole liver and spleen volume ratio [LV{sub R}/(LV{sub W} + SV{sub 0})], and pre and post hepatectomy portal venous pressures. In all hepatectomy donors, the volumes of the remnant liver and spleen were increased (increased rates, 59.5 ± 50.5%, 47.9 ± 22.6%). The increment rate of the remnant liver volume revealed a positive correlation with LV{sub R}/LV{sub W} (r = 0.759, p < 0.01). The other analyzed factors showed no correlation with changes in liver and spleen volumes. The spleen and remnant liver volumes were increased at CT volumetry performed 2 weeks after partial liver donation. Among the various analyzed factors, LV{sub R}/LV{sub W} influences the increment rate of the remnant liver volume.

Electrocatalytic reduction of H{sub 2}O{sub 2} by Pt nanoparticles covalently bonded to thiolated carbon nanostructures

Energy Technology Data Exchange (ETDEWEB)

You, Jung-Min; Kim, Daekun [Department of Chemistry and Institute of Basic Science, Chonnam National University, Gwangju 500-757 (Korea, Republic of); Jeon, Seungwon [Department of Chemistry and Institute of Basic Science, Chonnam National University, Gwangju 500-757 (Korea, Republic of)

2012-03-30

Highlights: Black-Right-Pointing-Pointer Novel thiolated carbon nanostructures - platinum nanoparticles [t-GO-C(O)-pt and t-MWCNT-C(O)-S-pt] have been synthesized, and [t-GO-C(O)-pt and t-MWCNT-C(O)-S-pt] denotes as t-GO-pt and t-MWCNT-Pt in manuscript, respectively. Black-Right-Pointing-Pointer The modified electrode denoted as PDDA/t-GO-pt/GCE was used for the electrochemical determination of H{sub 2}O{sub 2} for the first time. Black-Right-Pointing-Pointer The results show that PDDA/t-GO-pt nanoparticles have the promising potential as the basic unit of the electrochemical biosensors for the detection of H{sub 2}O{sub 2}. Black-Right-Pointing-Pointer The proposed H{sub 2}O{sub 2} biosensors exhibited wide linear ranges and low detection limits, giving fast responses within 10 s. - Abstract: Glassy carbon electrodes were coated with thiolated carbon nanostructures - multi-walled carbon nanotubes and graphene oxide. The subsequent covalent addition of platinum nanoparticles and coating with poly(diallydimethylammonium chloride) resulted in biosensors that detected hydrogen peroxide through its electrocatalytic reduction. The sensors were easily and quickly prepared and showed improved sensitivity to the electrocatalytic reduction of H{sub 2}O{sub 2}. The Pt nanoparticles covalently bonded to the thiolated carbon nanostructures were characterized by transmission electron microscopy, X-ray photoelectron spectroscopy, and energy dispersive X-ray spectroscopy. Cyclic voltammetry and amperometry were used to characterize the biosensors' performances. The sensors exhibited wide linear ranges and low detection limits, giving fast responses within 10 s, thus demonstrating their potential for use in H{sub 2}O{sub 2} analysis.

Characterization of mesoporous carbon prepared from date stems by H{sub 3}PO{sub 4} chemical activation

Energy Technology Data Exchange (ETDEWEB)

Hadoun, H., E-mail: hhadoun@hotmail.com [Nuclear Research Center, 2 Bd Frantz Fanon, Algiers (Algeria); Laboratory of Reaction Genius, Mechanical and Processes Genius Faculty, University of Sciences and Technology Houari – Boumediene, BP n°32, El alia, bab ezzouar, 16111 Algiers (Algeria); Sadaoui, Z. [Laboratory of Reaction Genius, Mechanical and Processes Genius Faculty, University of Sciences and Technology Houari – Boumediene, BP n°32, El alia, bab ezzouar, 16111 Algiers (Algeria); Souami, N.; Sahel, D.; Toumert, I. [Nuclear Research Center, 2 Bd Frantz Fanon, Algiers (Algeria)

2013-09-01

The present work was focused on the determination of texture, morphology, crystanillity and oxygenated surface groups characteristics of an activated carbon prepared from date stems. Chemical activation of this precursor at different temperatures (450, 550 and 650 °C) was adopted using phosphoric acid as dehydrating agent at (2/1) impregnation ratio. Fourier transform infrared spectroscopy study was carried out to identify surface groups in date stems activated carbons. The microscopic structure was examined by nitrogen adsorption at 77 K. The interlayer spacing (d{sub 200} and d{sub 100}), stack height (L{sub c}), stack width (L{sub a}) and effective dimension L of the turbostratic crystallites (microcrystallite) in the date stems activated carbons were estimated from X-ray diffraction data (XRD). Results yielded a surface area, S{sub BET}, and total pore volume of 682, 1455, 1319 m{sup 2}/g and 0,343, 1,045 and 0.735 cm{sup 3}/g, for the carbon prepared at 450, 550 and 650 °C, respectively. Scanning electron microscopy exhibits a highly developed porosity which is in good agreement with the porous texture derived from gas adsorption data and these results confirm that the activated carbon is dominated by network of slit-shaped mesopores morphology and in some cases by varied micropores morphologies.

The spin relaxation of nitrogen donors in 6H SiC crystals as studied by the electron spin echo method

Energy Technology Data Exchange (ETDEWEB)

Savchenko, D., E-mail: dariyasavchenko@gmail.com [Institute of Physics of the Czech Academy of Sciences, Prague 182 21 (Czech Republic); National Technical University of Ukraine “Kyiv Polytechnic Institute,” Kyiv 03056 (Ukraine); Shanina, B.; Kalabukhova, E. [V.E. Lashkaryov Institute of Semiconductor Physics, NASU, Kyiv 03028 (Ukraine); Pöppl, A. [Institute of Experimental Physics II, Leipzig University, Leipzig D-04103 (Germany); Lančok, J. [Institute of Physics of the Czech Academy of Sciences, Prague 182 21 (Czech Republic); Mokhov, E. [A.F. Ioffe Physical Technical Institute, RAS, St. Petersburg 194021 (Russian Federation); Saint-Petersburg National Research University of Information Technologies, Mechanics and Optics, St. Petersburg 19710 (Russian Federation)

2016-04-07

We present the detailed study of the spin kinetics of the nitrogen (N) donor electrons in 6H SiC wafers grown by the Lely method and by the sublimation “sandwich method” (SSM) with a donor concentration of about 10{sup 17 }cm{sup −3} at T = 10–40 K. The donor electrons of the N donors substituting quasi-cubic “k1” and “k2” sites (N{sub k1,k2}) in both types of the samples revealed the similar temperature dependence of the spin-lattice relaxation rate (T{sub 1}{sup −1}), which was described by the direct one-phonon and two-phonon processes induced by the acoustic phonons proportional to T and to T{sup 9}, respectively. The character of the temperature dependence of the T{sub 1}{sup −1} for the donor electrons of N substituting hexagonal (“h”) site (N{sub h}) in both types of 6H SiC samples indicates that the donor electrons relax through the fast-relaxing centers by means of the cross-relaxation process. The observed enhancement of the phase memory relaxation rate (T{sub m}{sup −1}) with the temperature increase for the N{sub h} donors in both types of the samples, as well as for the N{sub k1,k2} donors in Lely grown 6H SiC, was explained by the growth of the free electron concentration with the temperature increase and their exchange scattering at the N donor centers. The observed significant shortening of the phase memory relaxation time T{sub m} for the N{sub k1,k2} donors in the SSM grown sample with the temperature lowering is caused by hopping motion of the electrons between the occupied and unoccupied states of the N donors at N{sub h} and N{sub k1,k2} sites. The impact of the N donor pairs, triads, distant donor pairs formed in n-type 6H SiC wafers on the spin relaxation times was discussed.

Thermodynamic Optimization of Supercritical CO{sub 2} Brayton Cycles

Energy Technology Data Exchange (ETDEWEB)

Rhim, Dong-Ryul; Park, Sung-Ho; Kim, Su-Hyun; Yeom, Choong-Sub [Institute for Advanced Engineering, Yongin (Korea, Republic of)

2015-05-15

The supercritical CO{sub 2} Brayton cycle has been studied for nuclear applications, mainly for one of the alternative power conversion systems of the sodium cooled fast reactor, since 1960's. Although the supercritical CO{sub 2} Brayton cycle has not been expected to show higher efficiency at lower turbine inlet temperature over the conventional steam Rankine cycle, the higher density of supercritical CO{sub 2} like a liquid in the supercritical region could reduce turbo-machinery sizes, and the potential problem of sodium-water reaction with the sodium cooled fast reactor might be solved with the use of CO{sub 2} instead of water. The supercritical CO{sub 2} recompression Brayton cycle was proposed for the better thermodynamic efficiency than for the simple supercritical CO{sub 2} Brayton cycle. Thus this paper presents the efficiencies of the supercritical CO{sub 2} recompression Brayton cycle along with several decision variables for the thermodynamic optimization of the supercritical CO{sub 2} recompression Brayton cycle. The analytic results in this study show that the system efficiency reaches its maximum value at a compressor outlet pressure of 200 bars and a recycle fraction of 30 %, and the lower minimum temperature approach at the two heat exchangers shows higher system efficiency as expected.

Synthesis of carbon-supported nickel catalysts for the dry reforming of CH{sub 4}

Energy Technology Data Exchange (ETDEWEB)

Fidalgo, B.; Zubizarreta, L.; Bermudez, J.M.; Arenillas, A.; Menendez, J.A. [Instituto Nacional del Carbon, CSIC, Apartado 73, 33080 Oviedo (Spain)

2010-07-15

A series of carbon-based nickel (Ni) catalysts was prepared in order to investigate the effect of the preparation method on the dispersion of Ni and its final catalytic activity in the dry reforming of methane, i.e. CH{sub 4} + CO{sub 2} 2H{sub 2} + 2CO. Three parameters were studied: (i) the influence of the surface chemistry of the carbon used as support; (ii) the method of drying (conventional vs. microwave drying); and, (iii) the temperature of the reduction stage. In order to study the role of the surface chemistry of the commercial activated carbon used as support, the active carbon was tested as received and oxidized. Although a better Ni dispersion was achieved over the oxidized support, the conversions were much lower. It was also found that microwave drying offers various advantages over conventional drying, the main one being that less time is required to prepare the catalyst. Two reduction temperatures were used (300 and 500 C), being found that it is necessary to adjust this parameter to prevent the Ni particles from sintering. (author)

Optimizing supercritical carbon dioxide in the inactivation of bacteria in clinical solid waste by using response surface methodology

Energy Technology Data Exchange (ETDEWEB)

Hossain, Md. Sohrab [Department of Environmental Technology, School of Industrial Technology, Universiti Sains Malaysia, 11800 Penang (Malaysia); Nik Ab Rahman, Nik Norulaini [School of Distance Education, Universiti Sains Malaysia, 11800 Penang (Malaysia); Balakrishnan, Venugopal [Institute for Research in Molecular Medicine, Universiti Sains Malaysia, 11800 Penang (Malaysia); Alkarkhi, Abbas F.M. [Department of Environmental Technology, School of Industrial Technology, Universiti Sains Malaysia, 11800 Penang (Malaysia); Ahmad Rajion, Zainul [School of Dental Science, Universiti Sains Malaysia, 16150 Kubang Kerian, Kelantan (Malaysia); Ab Kadir, Mohd Omar, E-mail: akmomar@usm.my [Department of Environmental Technology, School of Industrial Technology, Universiti Sains Malaysia, 11800 Penang (Malaysia)

2015-04-15

Highlights: • Supercritical carbon dioxide sterilization of clinical solid waste. • Inactivation of bacteria in clinical solid waste using supercritical carbon dioxide. • Reduction of the hazardous exposure of clinical solid waste. • Optimization of the supercritical carbon dioxide experimental conditions. - Abstract: Clinical solid waste (CSW) poses a challenge to health care facilities because of the presence of pathogenic microorganisms, leading to concerns in the effective sterilization of the CSW for safe handling and elimination of infectious disease transmission. In the present study, supercritical carbon dioxide (SC-CO{sub 2}) was applied to inactivate gram-positive Staphylococcus aureus, Enterococcus faecalis, Bacillus subtilis, and gram-negative Escherichia coli in CSW. The effects of SC-CO{sub 2} sterilization parameters such as pressure, temperature, and time were investigated and optimized by response surface methodology (RSM). Results showed that the data were adequately fitted into the second-order polynomial model. The linear quadratic terms and interaction between pressure and temperature had significant effects on the inactivation of S. aureus, E. coli, E. faecalis, and B. subtilis in CSW. Optimum conditions for the complete inactivation of bacteria within the experimental range of the studied variables were 20 MPa, 60 °C, and 60 min. The SC-CO{sub 2}-treated bacterial cells, observed under a scanning electron microscope, showed morphological changes, including cell breakage and dislodged cell walls, which could have caused the inactivation. This espouses the inference that SC-CO{sub 2} exerts strong inactivating effects on the bacteria present in CSW, and has the potential to be used in CSW management for the safe handling and recycling-reuse of CSW materials.

Effect of oxygen co-injected with carbon dioxide on Gothic shale caprock–CO<sub>2sub>–brine interaction during geologic carbon sequestration

Energy Technology Data Exchange (ETDEWEB)

Jung, Hun Bok; Um, Wooyong; Cantrell, Kirk J.

2013-09-01

Co-injection of oxygen, a significant component in CO<sub>2sub> streams produced by the oxyfuel combustion process, can cause a significant alteration of the redox state in deep geologic formations during geologic carbon sequestration. The potential impact of co-injected oxygen on the interaction between synthetic CO<sub>2sub>–brine (0.1 M NaCl) and shale caprock (Gothic shale from the Aneth Unit in Utah) and mobilization of trace metals was investigated at ~ 10 MPa and ~ 75 °C. A range of relative volume percentages of O<sub>2sub> to CO<sub>2sub> (0, 1, 4 and 8%) were used in these experiments to address the effect of oxygen on shale–CO<sub>2sub>–brine interaction under various conditions. Major mineral phases in Gothic shale are quartz, calcite, dolomite, montmorillonite, and pyrite. During Gothic shale–CO<sub>2sub>–brine interaction in the presence of oxygen, pyrite oxidation occurred extensively and caused enhanced dissolution of calcite and dolomite. Pyrite oxidation and calcite dissolution subsequently resulted in the precipitation of Fe(III) oxides and gypsum (CaSO<sub>4sub>·2H<sub>2sub>O). In the presence of oxygen, dissolved Mn and Ni were elevated because of oxidative dissolution of pyrite. The mobility of dissolved Ba was controlled by barite (BaSO<sub>4sub>) precipitation in the presence of oxygen. Dissolved U in the experimental brines increased to ~ 8–14 μg/L, with concentrations being slightly higher in the absence of oxygen than in the presence of oxygen. Experimental and modeling results indicate the interaction between shale caprock and oxygen co-injected with CO<sub>2sub> during geologic carbon sequestration can exert significant impacts on brine pH, solubility of carbonate minerals, stability of sulfide minerals, and mobility of trace metals. The major impact of oxygen is most likely to occur in the zone near CO<sub>2sub> injection wells where impurity gases can accumulate. Finally, oxygen in CO<sub>2sub

Fe{sub 3}O{sub 4} nanoparticles-wrapped carbon nanofibers as high-performance anode for lithium-ion battery

Energy Technology Data Exchange (ETDEWEB)

Jiang, Fei; Zhao, Saihua; Guo, Jinxin; Su, Qingmei; Zhang, Jun; Du, Gaohui, E-mail: gaohuidu@zjnu.edu.cn [Zhejiang Normal University, Institute of Physical Chemistry (China)

2015-08-15

One-dimensional hierarchical nanostructures composed of Fe{sub 3}O{sub 4} nanoparticles and carbon nanofibers (CNFs) have been successfully synthesized through a facile solvothermal method followed by a simple thermal annealing treatment. X-ray diffraction and electron microscopy reveal that Fe{sub 3}O{sub 4} nanoparticles with a size of 80–100 nm are uniformly dispersed on CNFs. The Fe{sub 3}O{sub 4}/CNFs nanocomposites show an enhanced reversible capacity and excellent rate performance as anode for Li-ion battery. The reversible capacity of the nanocomposites retains 684 mAh g{sup −1} after 55 cycles at 100 mA g{sup −1}. Even when cycled at various rate (100, 200, 500, 1000, and 2000 mA g{sup −1}) for 50 cycles, the capacity can recover to 757 mAh g{sup −1} at the current of 100 mA g{sup −1}. The enhanced electrochemical performances are attributed to the characteristics of interconnected one-dimensional nanostructures that provide three-dimensional networks for Li-ion diffusion and electron transfer, and can further accommodate the volumetric change of Fe{sub 3}O{sub 4} nanoparticles during charge–discharge cycling.

Carbon-based catalytic briquettes for the reduction of NO: Effect of H{sub 2}SO{sub 4} and HNO{sub 3} carbon support treatment

Energy Technology Data Exchange (ETDEWEB)

A. Boyano; M.E. Galvez; R. Moliner; M.J. Lazaro [Instituto de Carboquimica CSIC, Zaragoza (Spain)

2008-08-15

The influence of treating carbon with sulphuric and nitric acids on the activity of a carbon-based briquette catalyst for NO reduction with NH{sub 3} was examined in a fixed-bed reactor at low temperature (150{sup o}C). The briquette catalysts were prepared from a low-rank coal and a commercial tar pitch. The active phase was impregnated from a suspension of ashes of petroleum coke by means of an equilibrium adsorption method. The catalytic behaviour of NO reduction over acid treated briquettes was found to vary with the surface characteristics of the carbon support. This suggests that the number of oxygen-containing sites as well as vanadium load and dispersion affect the reaction activity. In the presence of oxygen, the SCR activity is enhanced with a nitric acid treatment, activity is promoted by the presence of acidic surface groups such as carboxyl and lactone, which can help not only to create a reservoir of reactants on the catalysts surface but also to improve the dispersion or even increase the amount of vanadium loading. Therefore, the results of this study suggest that the formation of acidic sites on the surface is an important step for NO reduction with NH{sub 3} over carbon-based catalysts. Additional techniques such as XPS and TPD to characterize the oxygen surface and those such as N{sub 2} adsorption to characterize the textural properties were also used in this study. 46 refs., 6 figs., 5 tabs.

Ammonia-treated porous carbon derived from ZIF-8 for enhanced CO{sub 2} adsorption

Energy Technology Data Exchange (ETDEWEB)

Ma, Xiancheng [School of Energy Science and Engineering, Central South University, Changsha 410083, Hunan (China); Li, Liqing, E-mail: liqingli@hotmail.com [School of Energy Science and Engineering, Central South University, Changsha 410083, Hunan (China); Wang, Shaobin [Department of Chemical Engineering, Curtin University, GPO Box U1987, Perth 6845, WA (Australia); Lu, Mingming [Department of Civil and Environmental Engineering, University of Cincinnati, Cincinnati, OH 45221 (United States); Li, Hailong; Ma, Weiwu [School of Energy Science and Engineering, Central South University, Changsha 410083, Hunan (China); Keener, Tim C. [Department of Civil and Environmental Engineering, University of Cincinnati, Cincinnati, OH 45221 (United States)

2016-04-30

Graphical abstract: The role of nitrogen species in increasing CO{sub 2} adsorption capacity has been explained with the mechanisms of base–acid interaction, as well as hydrogen bonds interaction. - Highlights: • A porous carbon (ZC) was prepared at 900 °C using ZIF-8 as a solid template for CO{sub 2} adsorption. • The ZC was further treated by ammonia functionalization to improve CO{sub 2} uptake. • The detailed interaction mechanism between N-containing groups and CO{sub 2} molecules is elucidated. - Abstract: A porous carbon (ZC) was prepared at 900 °C using zeolitic imidazolate framework-8 (ZIF-8) as a solid template for CO{sub 2} adsorption. The ZC was further treated by ammonia functionalization to improve CO{sub 2} uptake. The textural and surface characteristics of ZC samples were determined by X-ray diffraction (XRD), N{sub 2} adsorption, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). It was revealed that ammonia treatment at 600 °C considerably enhanced the specific surface area and N-content of ZC. However, the pyrrolic-N group was decreased, yet the pyridinic-N group was increased with an increased temperature. The pyrrolic-N significantly enhanced CO{sub 2} adsorption. The ammonia treatment, on the one hand, increases the alkalinity of ZC sample and the base–acid interaction between N-containing functional groups with CO{sub 2}. On the other hand, the ammonia treatment increased pyrrolic-N group (NH) into carbon surface facilitating the hydrogen-bonding interactions between proton of pyrrolic-N and CO{sub 2} molecules.

Preparation and characterization of carbonate terminated polycrystalline Al{sub 2}O{sub 3}/Al films

Energy Technology Data Exchange (ETDEWEB)

Tornow, C. [Fraunhofer-Institute for Manufacturing Technology and Applied Materials Research (IFAM), Adhesive Bonding Technology and Surfaces, Wiener Str. 12, D-28359 Bremen (Germany); Fachhochschule Oldenburg/Ostfriesland/Wilhelmshaven, University of Applied Sciences, Faculty of Technology, Department of Applied Natural Sciences, Engineering Physics, Constantiaplatz 4, D-26723 Emden (Germany); Noeske, P.-L.M. [Fraunhofer-Institute for Manufacturing Technology and Applied Materials Research (IFAM), Adhesive Bonding Technology and Surfaces, Wiener Str. 12, D-28359 Bremen (Germany); Dieckhoff, S. [Fraunhofer-Institute for Manufacturing Technology and Applied Materials Research (IFAM), Adhesive Bonding Technology and Surfaces, Wiener Str. 12, D-28359 Bremen (Germany); Wilken, R. [Fraunhofer-Institute for Manufacturing Technology and Applied Materials Research (IFAM), Adhesive Bonding Technology and Surfaces, Wiener Str. 12, D-28359 Bremen (Germany)]. E-mail: rw@ifam.fraunhofer.de; Gaertner, K. [Fachhochschule Oldenburg/Ostfriesland/Wilhelmshaven, University of Applied Sciences, Faculty of Technology, Department of Applied Natural Sciences, Engineering Physics, Constantiaplatz 4, D-26723 Emden (Germany)

2005-12-15

X-ray photoelectron spectroscopy (XPS) was applied to investigate the surface reactivity of polycrystalline Al films in contact with a gas mixture of carbon dioxide and oxygen at room temperature. Based on the characterization of interactions between these substrates and the individual gases at selected exposures, various surface functionalities were identified. Simultaneously dosing both carbon dioxide and oxygen is shown to create surface-terminating carbonate species, which contribute to inhibiting the formation of an Al{sub 2}O{sub 3} layer. Finally, a reaction scheme is suggested to account for the observed dependence of surface group formation on the dosing conditions.

Optimized dispersion of conductive agents for enhanced Li-storage performance of TiO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Han, Moyan; Chen, Ge, E-mail: chenge@bjut.edu.cn

2016-12-01

Highlights: • A novel TiO{sub 2}/carbon (TiO{sub 2}/C) composite has been synthesized by a layer-by-layer deposition method combined with electrostatic interaction. • As anode materials for Li-ion batteries, the TiO{sub 2}/C composites exhibit excellent rate capability and cycling stability. • The enhanced electrochemical performance may be attributed to the well-dispersed carbon conductive framework. - Abstract: Novel TiO{sub 2}/carbon (TiO{sub 2}/C) composites have been synthesized by a layer-by-layer deposition method, with electrostatic interaction. The addition of carbon conductive agents enhances the electrochemical performance of TiO{sub 2}. Carbon for these has been sourced 0D nitrogen-doped carbon, 1D carbon nanotubes and 2D graphene. The as-obtained TiO{sub 2}/C composites show carbon nanotubes and titanium dioxide coaxial nanocables anchored on the graphene. The nitrogen-doped carbon is uniformly dispersed on the nanocables. As anode materials for Li-ion batteries, the TiO{sub 2}/C composites exhibit excellent rate capability and cycling stability. A capacity of 150 mAh/g is retained at a current density of 4 A/g. The enhanced electrochemical performance may be attributed to the well-dispersed carbon conductive framework, which facilitates charge transfer during the lithium insertion/extraction process.

In situ construction of carbon nano-interconnects between the LiFePO{sub 4} grains using ultra low-cost asphalt

Energy Technology Data Exchange (ETDEWEB)

Zhang Wenkui; Zhou Xiaozheng [College of Chemical Engineering and Materials Science, Zhejiang University of Technology, Hangzhou 310014 (China); Tao Xinyong, E-mail: tao@zjut.edu.c [College of Chemical Engineering and Materials Science, Zhejiang University of Technology, Hangzhou 310014 (China); Huang Hui; Gan Yongping [College of Chemical Engineering and Materials Science, Zhejiang University of Technology, Hangzhou 310014 (China); Wang Chuntao [College of Electromechanical Engineering, Zhejiang Ocean University, Hangzhou 316000 (China)

2010-03-01

LiFePO{sub 4}/C composite cathode materials with carbon nano-interconnect structures were synthesized by one-step solid state reaction using low-cost asphalt as both carbon source and reducing agent. Based on the thermogravimetry, differential scanning calorimetry, transmission electron microscopy and high-resolution transmission electron microscopy, a growth model was proposed to illustrate the formation of the carbon nano-interconnect between the LiFePO{sub 4} grains. The LiFePO{sub 4}/C composite shows enhanced discharge capacity (150 mAh g{sup -1}) with excellent capacity retention compared with the bare LiFePO{sub 4} (41 mAh g{sup -1}) due to the electronically conductive nanoscale networking provided by the asphalt-based carbon. The results prove that the asphalt is a perfect carbon source and reduction agent for cost-effective production of high performance LiFePO{sub 4}/C composite.

Reducing replacement donors in Sub-Saharan Africa: challenges and affordability.

Science.gov (United States)

Bates, I; Manyasi, G; Medina Lara, A

2007-12-01

In 1975, the World Health Assembly recommended that blood for transfusion should come from voluntary, non-remunerated donors; yet, in Africa, 75-80% of blood for transfusion still comes from hospital-based replacement donors. Although comprehensive economic data are scarce, evidence indicates that blood from voluntary donors recruited and screened at centralized transfusion centres, costs four to eight times as much as blood from a hospital-based, replacement donor system. Donor recruitment, quality assurance systems and distribution mechanisms in the centralized system are major reasons for the cost difference. There are concerns about the sustainability of centralized voluntary donor systems and their compatibility with the levels of health care that exist in many poor countries yet burdening patients' families with the responsibility of finding replacement blood donors will exacerbate poverty and reduce the safety of the blood supply. There are measures that can be introduced into hospital-based systems to improve safe blood supply in Africa but their effectiveness in different contexts needs to be evaluated.

Structural and compositional optimization of the LiNi{sub 0.8}Co{sub 0.2}O{sub 2} electrode by new synthesis conditions

Energy Technology Data Exchange (ETDEWEB)

Mosqueda L, Y.; Milian P, C. R.; Pomares A, M.; Rodriguez H, J.; Perez C, E., E-mail: yodalgis@imre.oc.uh.cu [Havana University, Institute of Materials Science and Technology, Zapata y G, Plaza de la Revolucion, Vedado, 10400 Havana (Cuba)

2012-07-01

The optimization of citrate precursor method to obtain the LiNi{sub 0.8}Co{sub 0.2}O{sub 2} oxide from the thermal decomposition of the citrate precursor (NH{sub 4}){sub 3}LiNi{sub 0.8}Co{sub 0.2}(C{sub 6}H{sub 5}O{sub 7}) is presented. The optimization procedure consists of both the lithium atmosphere and the reaction time control during the decomposition of the citrate precursor. Were obtained and characterized two kind of the (Li{sub l-x}Ni{sub x})(Ni{sub 0.8}Co{sub 0.2})O{sub 2} oxides, with and without optimized synthesis conditions, identified as A and B oxides, respectively. The A and B oxides are characterized by compositional, structural and electrochemical studies. The results showed that is possible to reach the ordered oxide phase at smaller reaction time if the lithium atmosphere is controlled. From the combination of the chemical analysis by Icp and the DRX Rietveld structural refinement it is possible to establish the Li, Ni(II), Ni(III) and Co(III) composition with great accuracy. The resulted structural and compositional transformations have a close relation with technological parameters of the rechargeable lithium battery using Li Ni{sub 0.8}Co{sub 0.2}O{sub 2} oxide as cathode. (Author)

Carbon Mineralization by Aqueous Precipitation for Beneficial Use of CO<sub>2sub> from Flue Gas

Energy Technology Data Exchange (ETDEWEB)

Devenney, Martin [Calera Corporation, Moss Landing, CA (United States); Gilliam, Ryan [Calera Corporation, Moss Landing, CA (United States); Seeker, Randy [Calera Corporation, Moss Landing, CA (United States)

2015-06-30

The objective of this project was to demonstrate an innovative process to mineralize CO<sub>2sub> from flue gas directly to reactive carbonates and maximize the value and versatility of its beneficial use products. The program scope includes the design, construction, and testing of a CO<sub>2sub> Conversion to Material Products (CCMP) Pilot Demonstration Plant utilizing CO<sub>2sub> from the flue gas of a power production facility in Moss Landing, CA as well as flue gas from coal combustion. This final report details all development, analysis, design and testing of the project. Also included in the final report are an updated Techno-Economic Analysis and CO<sub>2sub> Lifecycle Analysis. The subsystems included in the pilot demonstration plant are the mineralization subsystem, the Alkalinity Based on Low Energy (ABLE) subsystem, the waste calcium oxide processing subsystem, and the fiber cement board production subsystem. The fully integrated plant was proven to be capable of capturing CO<sub>2sub> from various sources (gas and coal) and mineralizing it into a reactive calcium carbonate binder and subsequently producing commercial size (4ftx8ft) fiber cement boards. The final report provides a description of the “as built” design of these subsystems and the results of the commissioning activities that have taken place to confirm operability. The report also discusses the results of the fully integrated operation of the facility. Fiber cement boards have been produced in this facility exclusively using reactive calcium carbonate from captured CO<sub>2sub> from flue gas. These boards meet all US and China appropriate acceptance standards. Use demonstrations for these boards are now underway.

Management to optimize organ procurement in brain dead donors.

Science.gov (United States)

Mascia, L; Mastromauro, I; Viberti, S; Vincenzi, M; Zanello, M

2009-03-01

The demand for donor organs continues to exceed the number of organs available for transplantation. Many reasons may account for this discrepancy, such as the lack of consent, the absence of an experienced coordinator team able to solve logistical problems, the use of strict donor criteria, and suboptimal, unstandardized critical care management of potential organ donors. This has resulted in efforts to improve the medical care delivered to potential organ donors, so as to reduce organ shortages, improve organ procurement, and promote graft survival. The physiological changes that follow brain death entail a high incidence of complications jeopardizing potentially transplantable organs. Adverse events include cardiovascular changes, endocrine and metabolic disturbances, and disruption of internal homeostasis. Brain death also upregulates the release of pro-inflammatory molecules. Recent findings support the hypothesis that a preclinical lung injury characterized by an enhanced inflammatory response is present in potential donors and may predispose recipients to an adverse clinical prognosis following lung transplantation. In clinical practice, hypotension, diabetes insipidus, relative hypothermia, and natremia are more common than disseminated intravascular coagulation, cardiac arrhythmias, pulmonary oedema, acute lung injury, and metabolic acidosis. Strategies for the management of organ donors exist and consist of the normalization of donor physiology. Management has been complicated by the recent use of ''marginal'' donors and donors of advanced age or with ''extended'' criteria. Current guidelines suggest that the priority of critical care management for potential organ donors should be shifted from a ''cerebral protective'' strategy to a multimodal strategy aimed to preserve peripheral organ function.

A series of coordination polymers constructed from R-isophthalic acid (R=–SO{sub 3}H, –NO{sub 2}, and –OH) and N-donor ligands: Syntheses, structures and fluorescence properties

Energy Technology Data Exchange (ETDEWEB)

Zhou, Yong-Hong, E-mail: zhou21921@sina.com [School of Chemistry and Material Science, Huaibei Normal University, Huaibei 235000 (China); Zhou, Xu-Wan; Zhou, Su-Rong [School of Chemistry and Material Science, Huaibei Normal University, Huaibei 235000 (China); Tian, Yu-Peng; Wu, Jie-Ying [Department of Chemistry and Chemical Technology, Anhui University, Hefei 230039 (China)

2017-01-15

Six novel Zn(II), Cd(II), and Cu(II) mixed-ligand coordination complexes, namely, [Zn{sub 2}Na(sip){sub 2}(bpp){sub 3}(Hbpp)(H{sub 2}O){sub 2}]·8H{sub 2}O (1), [Cd{sub 3}(sip){sub 2}(nbi){sub 6}(H{sub 2}O){sub 2}]·7H{sub 2}O (2), [Zn(sip)(nbi){sub 2}(H{sub 2}O)]·Hnbi·3H{sub 2}O (3), [Cd(hip)(nbi){sub 2}(H{sub 2}O)]·nbi·5H{sub 2}O (4), [Cd{sub 2}(nip){sub 2}(nbi){sub 2}(H{sub 2}O){sub 2}]·DMF (5), and [Cu(nip)(nbi)(H{sub 2}O){sub 2}]·H{sub 2}O (6) (H{sub 3}sip=5-sulfoisophthalic acid, H{sub 2}hip=5-hydroxylisophthalic acid, H{sub 2}nip=5-nitroisophthalic acid, bpp=1,3-bis(4-pyridyl)propane, and nbi=6-nitrobenzimidazole) have been synthesized hydrothermally by the self-assembly of R-isophthalic acid (R=–SO{sub 3}H, –NO{sub 2}, and –OH) and N-donor ligands. Single crystal X-ray analyses reveal that two Zn(II) ions and one Na(I) ion of complex 1 are linked through O atoms to generate a 1D linear chain. Then the 2D supramolecular architectures are constructed via intermolecular interactions. In complex 2, the Cd1 ions are connected by bridging carboxyl groups from sip{sup 3−} anions to form 1D double chain, which are further connected by Cd2 ions to afford 2D layer structure. The adjacent 2D layers are further linked via hydrogen-bonding interactions to give 3D supramolecular network. Compounds 3–5 show 1D chain structures, which are assembled into 2D or 3D supramolecular frameworks via weak interactions. In compound 6, the Cu(II) ions are bridged by the nip{sup 2−} ligands to form 48-membered ring, which is assembled into 1Dchain via the π-π stacking interaction. In addition, the thermal stabilities and fluorescence properties of these compounds have also been studied. - Graphical abstract: A series of Cd(II)/Zn(II)/ Cu(II) coordination polymers based on R-isophthalic acid (R=–SO{sub 3}H, –NO{sub 2}, and –OH) and N-donor ligands have been synthesized under hydrothermal conditions and structurally characterized. Photoluminescent properties

Synthesis of carbon-doped nanosheets m-BiVO{sub 4} with three-dimensional (3D) hierarchical structure by one-step hydrothermal method and evaluation of their high visible-light photocatalytic property

Energy Technology Data Exchange (ETDEWEB)

Zhao, Deqiang; Zong, Wenjuan [Chongqing University, Key Laboratory of Three Gorges Reservoir Region’s Eco-Environment Ministry of Education and National Centre for International Research of Low-carbon and Green Buildings (China); Fan, Zihong [School of Environmental and Biological Engineering Chongqing Technology and Business University (China); Fang, Yue-Wen [East China Normal University, Key Laboratory of Polar Materials and Devices, Ministry of Education, Department of Electronic Engineering (China); Xiong, Shimin; Du, Mao; Wu, Tianhui; Ji, Fangying, E-mail: jfy@cqu.edu.cn; Xu, Xuan, E-mail: xuxuan@cqu.edu.cn [Chongqing University, Key Laboratory of Three Gorges Reservoir Region’s Eco-Environment Ministry of Education and National Centre for International Research of Low-carbon and Green Buildings (China)

2017-04-15

To achieve an efficient visible-light absorption and degradation of bismuth vanadate (BiVO{sub 4}), in this paper, a carbon-doped (C-doped) nanosheets monoclinic BiVO{sub 4} (m-BiVO{sub 4}), with thicknesses within 19.86 ± 8.48 nm, was synthesized using polyvinylpyrrolidone K-30 (PVP) as a template and l-carbonic as the carbon source by one-step hydrothermal synthesis method. This C-doped BiVO{sub 4} in three-dimensional (3D) hierarchical structure enjoys high visible-light photocatalytic property. The samples were characterized using x-ray diffraction, scanning electron microscope, Raman spectra, energy dispersive spectrometer, transmission electron microscope, x-ray photoelectron spectroscopy, UV–Vis diffused reflectance spectroscopy, specific surface area, electron spin resonance, and transient photocurrent response, photoluminescence spectra, and incident-photon-to-current conversion efficiency, respectively. What is more, we studied the C-doping effect on the band-gap energy of BiVO{sub 4} based on First-principles. X-ray diffraction analysis showed that all photocatalysts were in the same single monoclinic scheelite structure. According to the other characterization results, the element C was successfully doped in BiVO{sub 4}, resulting in the 3D hierarchical structure of C-doped BiVO{sub 4} (P-L-BiVO{sub 4}). We speculated that it could be the directional coalescence mechanism by which the l-cysteine promoted the two-dimensional growth and C-doping process of BiVO{sub 4}, thus leading to the formation of nanosheets which were then promoted into 3D self-assembly by PVP and the shortening of the band gap. Among all samples, P-L-BiVO{sub 4} can make the highest removal ratio of rhodamine B under visible-light irradiation. The stability of P-L-BiVO{sub 4} was verified by recycle experiments. It showed that P-L-BiVO{sub 4} had strong visible-light absorption behavior and high electron–hole separation efficiency and stability, making a significant

One-step synthesis of g-C{sub 3}N{sub 4} hierarchical porous structure nanosheets with dramatic ultraviolet light photocatalytic activity

Energy Technology Data Exchange (ETDEWEB)

Lu, Jing; Wang, Yong; Huang, Jianfeng, E-mail: huangjfsust@126.com; Cao, Liyun; Li, Jiayin; Hai, Guojuan; Bai, Zhe

2016-12-15

Highlights: • g-C{sub 3}N{sub 4} nanosheets with hierarchical porous structure were synthesized via one step. • The band gap of the nanosheets was wider and investigated in detail. • The nanosheets can degrade almost all of the RhB within 9 min. • The photocurrent of the nanosheets is 5.97 times as high as that of the P-25. - Abstract: Graphitic carbon nitride (g-C{sub 3}N{sub 4}) nanosheets with hierarchical porous structure were synthesized via one-step thermal condensation-oxidation process. The microstructure of g-C{sub 3}N{sub 4} was characterized to explain the dramatic ultraviolet light photocatalytic activity. The results showed that g-C{sub 3}N{sub 4} hierarchical aggregates were assembled by nanosheets with a length of 1–2 μm and a thickness of 20–30 nm. And the N{sub 2}-adsorption/desorption isotherms further informed the presence of fissure form mesoporous structure. An enhanced photocurrent of 37.2 μA was obtained, which is almost 5 times higher than that of P-25. Besides, the g-C{sub 3}N{sub 4} nanosheets displayed the degradation of Rhodamine B with 99.4% removal efficiency in only 9 min. Such highly photocatalytic activity could be attributed to the nano platelet morphology which improves electron transport ability along the in-plane direction. In addition, the hierarchical porous structure adapted a wider band gap of C{sub 3}N{sub 4}. Therefore, the photoinduced electron-hole pairs have a stronger oxidation-reduction potential for photocatalysis.

Physicochemical investigations of carbon nanofiber supported Cu/ZrO{sub 2} catalyst

Energy Technology Data Exchange (ETDEWEB)

Din, Israf Ud, E-mail: drisraf@yahoo.com, E-mail: maizats@petronas.com.my; Shaharun, Maizatul S., E-mail: drisraf@yahoo.com, E-mail: maizats@petronas.com.my [Department of Fundamental and Applied Sciences, Universiti Teknologi PETRONAS (Malaysia); Subbarao, Duvvuri, E-mail: duvvuri-subbarao@petronas.com.my [Department of Chemical Engineering, Universiti Teknologi PETRONAS (Malaysia); Naeem, A., E-mail: naeeem64@yahoo.com [National Centre of Excellence in Physical Chemistry, University of Peshawar (Pakistan)

2014-10-24

Zirconia-promoted copper/carbon nanofiber catalysts (Cu‐ZrO{sub 2}/CNF) were prepared by the sequential deposition precipitation method. The Herringbone type of carbon nanofiber GNF-100 (Graphite nanofiber) was used as a catalyst support. Carbon nanofiber was oxidized to (CNF-O) with 5% and 65 % concentration of nitric acid (HNO{sub 3}). The CNF activated with 5% HNO{sub 3} produced higher surface area which is 155 m{sup 2}/g. The catalyst was characterized by X-ray Diffraction (XRD), Fourier Transform Infra-Red (FTIR) and N{sub 2} adsorption-desorption. The results showed that increase of HNO{sub 3} concentration reduced the surface area and porosity of the catalyst.

Study of the reduction of sulfur dioxide to elemental sulfur by carbon monoxide on a La/sub 0/ /sub 5/ Sr/sub 0/ /sub 5/ CoO/sub 3/ catalyst

Energy Technology Data Exchange (ETDEWEB)

Hibbert, D B; Tseung, A C.C.

1979-12-01

A study of the reduction of sulfur dioxide to elemental sulfur by carbon monoxide on a La/sub 0/ /sub 5/ Sr/sub 0/ /sub 5/ CoO/sub 3/ catalyst a perovskite oxide, to determine the effects of oxygen and water on SO2 reduction showed that in the presence of 5 to 16% oxygen, the reaction between sulfur dioxide and carbon monoxide still occurred if there was sufficient carbon monoxide in the gas to react with all the oxygen. At 600C, all the sulfur dioxide was removed at 5 to 16% oxygen levels. Water vapor at 2% did not adversely affect the reaction. The unwanted by-products, hydrogen disulfide and carbonyl sulfide, were reduced at contact times below 0.25 sec. During the reaction, the catalyst itself reacted with sulfur to give metal sulfides. When reagent grade CO/sub 2/O/sub 3/ was substituted for perovskite oxide, the maximum conversion of 98% of sulfur dioxide was attained at 550C, but an unacceptably high concentration of carbonyl sulfide was formed; within 1 hr, the sulfur dioxide conversion fell to 60%. The perovskite oxide reaction may be useful in removing sulfur dioxide from fosill fuel stack gases.

Effects of Ni and carbon-coated Ni addition on the thermoelectric properties of 25Bi{sub 2}Te{sub 3}+75Sb{sub 2}Te{sub 3} base composites

Energy Technology Data Exchange (ETDEWEB)

Yoon, Sang Min; Dharmaiah, Peyala; Femi, Olu Emmanuel; Lee, Chul Hee; Hong, Soon-Jik, E-mail: hongsj@kongju.ac.kr

2017-07-01

In this paper, we report the effect of nickel (Ni) and carbon coated nickel (C-Ni) on the thermoelectric and mechanical properties of 25Bi{sub 2}Te{sub 3}+75Sb{sub 2}Te{sub 3} (GA) base composites. Ni and C-Ni powders were synthesized using pulse wire evaporation and mixed with 25Bi{sub 2}Te{sub 3}+75Sb{sub 2}Te{sub 3} in a planetary ball mill. The morphology of the Ni and C-Ni powders and GA + x (x = none, Ni, or C-Ni) composites were examined using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The thermoelectric properties of the GA + x (x = none, Ni, or C-Ni) composites shows that the addition of Ni increases the carrier concentration while the presence of C-Ni reduces the carrier concentration to a level comparable to the bare sample (x = 0). Subsequently, the Seebeck coefficient of the GA + C-Ni sample increases by about 18% more than in the bare sample. The thermal conductivity of the GA + Ni and GA + C-Ni samples was considerably lower at room temperature compared to the bare sample. The mechanical properties of the GA + Ni and GA + C-Ni composite samples show a three-fold improvement compared to the bare sample. - Highlights: • Ni and carbon-coated Ni nanoparticles were incorporated into 25Bi{sub 2}Te{sub 3}+75Sb{sub 2}Te{sub 3} (BST) matrix. • Seebeck coefficient increased by 18% for BST/carbon coated Ni composites. • BST/carbon coated Ni composite reduces the thermal conductivity (21%). • The Vickers hardness of the BST/C-Ni composite samples significantly improved.

Hierarchical flower-like carbon nanosheet assembly with embedded hollow NiCo{sub 2}O{sub 4} nanoparticles for high- performance lithium ion batteries

Energy Technology Data Exchange (ETDEWEB)

Fang, Ling; Qiu, Huajun; Luo, Pan; Li, Wenxiang; Zhang, Huijuan; Wang, Yu, E-mail: wangy@cqu.edu.cn

2017-05-01

Highlights: • Flower-like NiCo{sub 2}O{sub 4}@carbon nanosphere is firstly synthesized for Li-ion batteries. • The nanostructure exhibits the unique feature of hollow NiCo{sub 2}O{sub 4} nanoparticles embedded inside and graphitized carbon layers coating outside. • The sample reveals stable structure, large specific surface area and good electrical conductivity. • The composite exhibits superior rate capability, cycling capacity and excellent Coulombic efficiency. - Abstract: The fabrication of closely bounded metal oxides/carbon hybrid nano-structures is significant for its use in energy-related areas especially lithium ion batteries (LIBs). In this research, a flower-like carbon sphere with hollow NiCo{sub 2}O{sub 4} nanoparticles encapsulated inside the carbon thin nanopetal is fabricated by using a mixed basic carbonate nickel and cobalt sphere as the precursor and templates followed by the outer carbon membrane covering and two-step calcination process. When tested as anode material for LIBs, this flower-like carbon-based hybrid sphere demonstrates a significantly enhanced reversible capacity and cycling stability at various current densities.

Simulated-sunlight-activated photocatalysis of Methyl Orange using carbon and lanthanum co-doped Bi{sub 2}O{sub 3}–TiO{sub 2} composite

Energy Technology Data Exchange (ETDEWEB)

Zou, Hao [Institute of Materials Science and Engineering, Southwest University of Science and Technology, Mianyang 621010 (China); Fundamental Science on Nuclear Wastes and Environment Safety Laboratory, Southwest University of Science and Technology, Mianyang 621010 (China); Song, Mianxin, E-mail: songmianxin@swust.edu.cn [Institute of Materials Science and Engineering, Southwest University of Science and Technology, Mianyang 621010 (China); Fundamental Science on Nuclear Wastes and Environment Safety Laboratory, Southwest University of Science and Technology, Mianyang 621010 (China); Yi, Facheng [Fundamental Science on Nuclear Wastes and Environment Safety Laboratory, Southwest University of Science and Technology, Mianyang 621010 (China); Bian, Liang [The Xinjiang Technical Institute of Physics & Chemistry, Urumqi 830011 (China); Liu, Pan [Institute of Materials Science and Engineering, Southwest University of Science and Technology, Mianyang 621010 (China); Fundamental Science on Nuclear Wastes and Environment Safety Laboratory, Southwest University of Science and Technology, Mianyang 621010 (China); Zhang, Shuai [Fundamental Science on Nuclear Wastes and Environment Safety Laboratory, Southwest University of Science and Technology, Mianyang 621010 (China)

2016-09-25

The C/La/Bi{sub 2}O{sub 3}–TiO{sub 2} composite was prepared by sol-gel method. The physicochemical properties of as-synthesized samples were characterized by the TG-DSC, FESEM, EDS, XRD, XPS, TEM, HRTEM and UV–vis DRS. Besides, their photoactivities were valuated by degrading Methyl Orange. The experimental results showed that the C/La/Bi{sub 2}O{sub 3}–TiO{sub 2} composite has anatase crystal structure and exhibits a remarkable optical absorption in UV–visible light region. In addition, carbon and lanthanum are deposited in the Bi{sub 2}O{sub 3}–TiO{sub 2} composite in the form of amorphous carbon and oxide, respectively. When the concentration of C/La/Bi{sub 2}O{sub 3}–TiO{sub 2} loading was 2.5 g/L, the decomposition rate of 25 mg/L Methyl Orange reached 94.3% under the irradiation of the 500 W xenon lamp after 60 min. The corresponding degradation rate constant of C/La/Bi{sub 2}O{sub 3}–TiO{sub 2} was 2.1, 9.2, 1.3 and 6.8 times higher than that of P25, Bi{sub 2}O{sub 3}–TiO{sub 2}, C/Bi{sub 2}O{sub 3}–TiO{sub 2} and La/Bi{sub 2}O{sub 3}–TiO{sub 2}, respectively. The reuse evaluation of C/La/Bi{sub 2}O{sub 3}–TiO{sub 2} indicated that its photocatalytic activity has good stability. - Highlights: • C/La/Bi{sub 2}O{sub 3}–TiO{sub 2} composite was prepared by sol-gel method. • Carbon is deposited in Bi{sub 2}O{sub 3}–TiO{sub 2} composite in the form of amorphous carbon. • Lanthanum is deposited in Bi{sub 2}O{sub 3}–TiO{sub 2} composite in the form of oxide. • C/La/Bi{sub 2}O{sub 3}–TiO{sub 2} exhibited superior photocatalytic activity than Bi{sub 2}O{sub 3}–TiO{sub 2}, C/Bi{sub 2}O{sub 3}–TiO{sub 2} and La/Bi{sub 2}O{sub 3}–TiO{sub 2}. • C/La/Bi{sub 2}O{sub 3}–TiO{sub 2} has good stability.

Facile synthesis of tunable carbon modified mesoporous TiO{sub 2} for visible light photocatalytic application

Energy Technology Data Exchange (ETDEWEB)

Wei, Xiao-Na; Wang, Hui-Long, E-mail: hlwang@dlut.edu.cn; Wang, Xin-Kui; Jiang, Wen-Feng

2017-08-01

Highlights: • Combined hydrothermal-calcination steps were used to prepare mesoporous C-TiO{sub 2}. • Polyacrylate was employed as the carbon source. • XPS revealed the interstitial carbon modifying mode through carbonate-like species. • C-TiO{sub 2} exhibited visible light activity towards dinitro butyl phenol degradation. - Abstract: In this paper, we describe a simple and novel approach for preparing tunable carbon-modified mesoporous TiO{sub 2} photocatalysts by combining the in-situ carbonization of PAA-Ti/TiO{sub 2}, hydrothermal reaction process and post-calcination treatment. The synthesized carbon-modified mesoporous TiO{sub 2} powders were of high crystallinity, large specific surface area and good visible light response. The carbon species were formed by the carbonization of polyacrylate (PAA). The presence of carbonates was subsequently confirmed by the XPS spectra, which significantly narrow down the band gap of TiO{sub 2}. The organic group in polyacrylate served as the carbon source and carbon resulted from in-situ carbonization treatment could help to inhibit the excessive growth of TiO{sub 2} grain and enlarge the pore structure of TiO{sub 2}. The amount of carbon species could be feasibly modulated by adjusting the post-calcination temperature and the surface area of the photocatalyst was enlarged further after the partial removal of carbon species. The carbon-modified mesoporous TiO{sub 2} powders exhibit excellent reproducibility and photocatalytic performance under visible light irradiation.

FMR study of carbon nanotubes filled with Fe{sub 3}O{sub 4} nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Kopyl, S., E-mail: svitlanakopyl@ua.pt [NRD-TEMA, Department of Mechanical Engineering, Aveiro Institute of Nanotechnology (AIN), University of Aveiro, Aveiro 3810-193 (Portugal); Timopheev, A.A., E-mail: andreyt@ua.pt [Physics Department and I3N, University of Aveiro, Aveiro 3810-193 (Portugal); Bystrov, V.S. [Department of Materials and Ceramic Engineering and CICECO, University of Aveiro, Aveiro 3810-193 (Portugal); Institute of Mathematical Problems of Biology RAS, 142290 Pushchino (Russian Federation); Bdikin, I. [NRD-TEMA, Department of Mechanical Engineering, Aveiro Institute of Nanotechnology (AIN), University of Aveiro, Aveiro 3810-193 (Portugal); Teixeira, B.M.S. [Physics Department and I3N, University of Aveiro, Aveiro 3810-193 (Portugal); Maevskij, E. [Institute of Theoretical and Experimental Biophysics RAS, 142290 Puschino (Russian Federation); Sobolev, N.A. [Physics Department and I3N, University of Aveiro, Aveiro 3810-193 (Portugal); Sousa, A.C.M. [NRD-TEMA, Department of Mechanical Engineering, Aveiro Institute of Nanotechnology (AIN), University of Aveiro, Aveiro 3810-193 (Portugal)

2014-05-01

Ordered arrays of carbon nanotubes were produced using a non-catalytic chemical vapour deposition. The multiwall nanotubes with an inner diameter of 120 nm were grown inside porous alumina templates and then filled with a magnetic colloid of 7.5 nm Fe{sub 3}O{sub 4} particles. X-ray diffraction, electron microscopy and ferromagnetic resonance (FMR) were used to characterize structural and magnetic properties of the grown samples. To estimate the filling factor from the angular dependence of the FMR resonance field, we have derived an effective demagnetization factor for our system using the formalism proposed by Skomsky and Dubowik. Angular dependence of the FMR line width allows one to conclude about the non-uniform filling, while temperature dependent measurements reflect typical features of a superparamagnetic resonance. - Highlights: • Synthesis of CNTs inside of alumina membrane and filling it with Fe{sub 3}O{sub 4} particles. • X-ray diffraction and electron microscopy study of the samples. • Magnetic properties of the samples studied by FMR. • Filling factor has been determined from the angular dependences of FMR. • Resulted magnetic CNTs are attractive for production of magnetic nanofluids.

Risk factors for human immunodeficiency virus among blood donors in Cameroon: evidence for the design of an Africa-specific donor history questionnaire.

Science.gov (United States)

Tagny, Claude T; Nguefack-Tsague, Georges; Fopa, Diderot; Ashu, Celestin; Tante, Estel; Ngo Balogog, Pauline; Donfack, Olivier; Mbanya, Dora; Laperche, Syria; Murphy, Edward

2017-08-01

In sub-Saharan Africa improving the deferral of at-risk blood donors would be a cost-effective approach to reducing transfusion-transmitted human immunodeficiency virus (HIV) infections. We performed a pilot case-control study to identify the risk factors for HIV infection and to develop an adapted donor history questionnaire (DHQ) for sub-Saharan Africa. We recruited 137 HIV-positive donors (cases) and 256 HIV-negative donors (controls) and gathered risk factor data using audio computer-assisted self-interview. Variables with univariate associations were entered into a logistic regression model to assess independent associations. A scoring scheme to distinguish between HIV-positive and HIV-negative donors was developed using receiver operating characteristics curves. We identified 16 risk factors including sex with sex worker, past history or treatment for sexually transmitted infections, and having a partner who used injected or noninjected illegal drugs. Two novel risks were related to local behavior: polygamy (odds ratio [OR], 22.7; 95% confidence interval [CI], 5.9-86.7) and medical or grooming treatment on the street (OR, 1.8; 95% CI, 1.0-3.0). Using the 16 selected items the mean scores (>100) were 82.6 ± 6.7 (range, 53.2-95.1) and 85.1 ± 5.2 for HIV-negative donors versus 77.9 ± 6.8 for HIV-positive ones (p = 0.000). Donors who scored between 80 and 90 were more likely to be HIV negative than those who scored less (OR, 31.4; 95% CI, 3.1-313.9). We identified both typical and novel HIV risk factors among Cameroonian blood donors. An adapted DHQ and score that discriminate HIV-negative donors may be an inexpensive means of reducing transfusion-transmitted HIV through predonation screening. © 2017 AABB.

Distribution of impurity states and charge transport in Zr{sub 0.25}Hf{sub 0.75}Ni{sub 1+x}Sn{sub 1−y}Sb{sub y} nanocomposites

Energy Technology Data Exchange (ETDEWEB)

Liu, Yuanfeng; Makongo, Julien P.A. [Laboratory for Emerging Energy and Electronic Materials, Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109 (United States); Page, Alexander [Department of Physics, University of Michigan, Ann Arbor, MI 48109 (United States); Sahoo, Pranati [Laboratory for Emerging Energy and Electronic Materials, Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109 (United States); Uher, Ctirad [Department of Physics, University of Michigan, Ann Arbor, MI 48109 (United States); Stokes, Kevin [The Advanced Materials Research Institute, Department of Physics, University of New Orleans, New Orleans, LA 70148 (United States); Poudeu, Pierre F.P., E-mail: ppoudeup@umich.edu [Laboratory for Emerging Energy and Electronic Materials, Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109 (United States)

2016-02-15

Energy filtering of charge carriers in a semiconducting matrix using atomically coherent nanostructures can lead to a significant improvement of the thermoelectric figure of merit of the resulting composite. In this work, several half-Heusler/full-Heusler (HH/FH) nanocomposites with general compositions Zr{sub 0.25}Hf{sub 0.75}Ni{sub 1+x}Sn{sub 1−y}Sb{sub y} (0≤x≤0.15 and y=0.005, 0.01 and 0.025) were synthesized in order to investigate the behavior of extrinsic carriers at the HH/FH interfaces. Electronic transport data showed that energy filtering of carriers at the HH/FH interfaces in Zr{sub 0.25}Hf{sub 0.75}Ni{sub 1+x}Sn{sub 1−y}Sb{sub y} samples strongly depends on the doping level (y value) as well as the energy levels occupied by impurity states in the samples. For example, it was found that carrier filtering at HH/FH interfaces is negligible in Zr{sub 0.25}Hf{sub 0.75}Ni{sub 1+x}Sn{sub 1−y}Sb{sub y} (y=0.01 and 0.025) composites where donor states originating from Sb dopant dominate electronic conduction. However, we observed a drastic decrease in the effective carrier density upon introduction of HH/FH interfaces for the mechanically alloyed Zr{sub 0.25}Hf{sub 0.75}Ni{sub 1+x}Sn{sub 0.995}Sb{sub 0.005} samples where donor states from unintentional Fe impurities contribute the largest fraction of conduction electrons. This work demonstrates the ability to synergistically integrate the concepts of doping and energy filtering through nanostructuring for the optimization of electronic transport in semiconductors. - Graphical abstract: Electronic transport in semiconducting half-Heusler (HH) matrices containing full-Heusler (FH) nanoinclusions strongly depends on the energy distribution of impurity states within the HH matrix with respect to the magnitude of the potential energy barrier at the HH/FH interfaces. - Highlights: • Coherent nanostructures enhanced thermoelectric behavior of half-Heusler alloys. • Nanostructures act as energy filter of

Hierarchical porous carbons prepared by an easy one-step carbonization and activation of phenol-formaldehyde resins with high performance for supercapacitors

Energy Technology Data Exchange (ETDEWEB)

Zheng, Zhoujun [State Key Laboratory of High Performance Ceramics and Superfine Microstructures, Graduate School, Shanghai Institute of Ceramics, Chinese Academy of Science, 1295 Dingxi Road, Shanghai 200050 (China); Gao, Qiuming [State Key Laboratory of High Performance Ceramics and Superfine Microstructures, Graduate School, Shanghai Institute of Ceramics, Chinese Academy of Science, 1295 Dingxi Road, Shanghai 200050 (China); School of Chemistry and Environment, Beihang University, 37 Xueyuan Road, Haidian District, Beijing 100191 (China)

2011-02-01

Hierarchical porous carbons are prepared by an easy one-step process of carbonization and activation derived from phenol-formaldehyde resins, in which potassium hydroxide acts as both the catalyst of polymerization and the activation reagent. The simple one-step preparation saves the cost of carbons and leads to high yield. The porous carbons have high surface areas with abundant pore structures. The plenty of micropores and small mesopores increase the capacitance and make the electrolyte ions diffuse fast into the pores. These hierarchical porous carbons show high performance for supercapacitors possessing of the optimized capacitance of 234 F g{sup -1} in aqueous electrolyte and 137 F g{sup -1} in organic electrolyte with high capacitive retention. (author)

One-pot hydrothermal synthesis of Ni-doped ZnIn{sub 2}S{sub 4} nanostructured film photoelectrodes with enhanced photoelectrochemical performance

Energy Technology Data Exchange (ETDEWEB)

Fan, Bing; Chen, Zhihong; Liu, Qiong; Zhang, Zhengguo; Fang, Xiaoming, E-mail: cexmfang@scut.edu.cn

2016-05-01

Graphical abstract: - Highlights: • Ni-doped ZnIn{sub 2}S{sub 4} photoelectrodes were synthesized by one-pot hydrothermal method. • Enhanced PEC performances are achieved by Ni-doped ZnIn{sub 2}S{sub 4} film photoelectrodes. • Ni-doped ZnIn{sub 2}S{sub 4} photoelectrodes possess superior photocarriers transfer abilities. • The optimal Ni content of ZnIn{sub 2}S{sub 4} photoelectrode is 2 wt%. - Abstract: Nanostructured Ni-doped ZnIn{sub 2}S{sub 4} films were prepared on the FTO conductive glass substrates by a one-pot hydrothermal method. The obtained films consist of nanosheets perpendicular to the FTO glass substrate, exhibiting a net-like porous microstructure. The doping of Ni into the lattice of ZnIn{sub 2}S{sub 4} is revealed by the X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM) characterizations. The results from the energy-dispersive spectroscopy (EDS) and X-ray photoelectron spectrometer (XPS) confirm the existence of Ni in the doped sample. The optical absorption of the Ni-doped samples is slightly stronger than that of the undoped one. Compared with the undoped sample, the Ni-doped ZnIn{sub 2}S{sub 4} photoelectrodes show enhanced photocurrent response and reach a maximum at the Ni content of 2 wt%. The carrier concentration and mobility of all the samples were estimated by using Hall measurements. The carrier concentration decreases with the increase of Ni content, and 2 wt% Ni-doped ZnIn{sub 2}S{sub 4} photoelectrode has the highest mobility, which is up to 840 cm{sup 2}/Vs. The results from the electrochemical impedance spectroscopy (EIS) measurements indicate that the lowest charge transfer resistance is achieved by the 2 wt% Ni-doped ZnIn{sub 2}S{sub 4} photoelectrode, agreeing with its best PEC performance. The photocurrent densities vs. time curves demonstrate that the stability of the 2 wt% Ni-doped ZnIn{sub 2}S{sub 4} photoelectrode is better than that of the undoped one. The enhanced PEC performance

The role of optimality in characterizing CO2 seepage from geological carbon sequestration sites

Energy Technology Data Exchange (ETDEWEB)

Cortis, Andrea; Oldenburg, Curtis M.; Benson, Sally M.

2008-09-15

Storage of large amounts of carbon dioxide (CO{sub 2}) in deep geological formations for greenhouse gas mitigation is gaining momentum and moving from its conceptual and testing stages towards widespread application. In this work we explore various optimization strategies for characterizing surface leakage (seepage) using near-surface measurement approaches such as accumulation chambers and eddy covariance towers. Seepage characterization objectives and limitations need to be defined carefully from the outset especially in light of large natural background variations that can mask seepage. The cost and sensitivity of seepage detection are related to four critical length scales pertaining to the size of the: (1) region that needs to be monitored; (2) footprint of the measurement approach, and (3) main seepage zone; and (4) region in which concentrations or fluxes are influenced by seepage. Seepage characterization objectives may include one or all of the tasks of detecting, locating, and quantifying seepage. Each of these tasks has its own optimal strategy. Detecting and locating seepage in a region in which there is no expected or preferred location for seepage nor existing evidence for seepage requires monitoring on a fixed grid, e.g., using eddy covariance towers. The fixed-grid approaches needed to detect seepage are expected to require large numbers of eddy covariance towers for large-scale geologic CO{sub 2} storage. Once seepage has been detected and roughly located, seepage zones and features can be optimally pinpointed through a dynamic search strategy, e.g., employing accumulation chambers and/or soil-gas sampling. Quantification of seepage rates can be done through measurements on a localized fixed grid once the seepage is pinpointed. Background measurements are essential for seepage detection in natural ecosystems. Artificial neural networks are considered as regression models useful for distinguishing natural system behavior from anomalous behavior

Electronic structure of crystalline uranium nitrides UN, U{sub 2}N{sub 3} and UN{sub 2}: LCAO calculations with the basis set optimization

Energy Technology Data Exchange (ETDEWEB)

Evarestov, R A; Panin, A I; Bandura, A V; Losev, M V [Department of Quantum Chemistry, St. Petersburg State University, University Prospect 26, Stary Peterghof, St. Petersburg, 198504 (Russian Federation)], E-mail: re1973@re1973.spb.edu

2008-06-01

The results of LCAO DFT calculations of lattice parameters, cohesive energy and bulk modulus of the crystalline uranium nitrides UN, U{sub 2}N{sub 3} and UN{sub 2} are presented and discussed. The LCAO computer codes Gaussian03 and Crystal06 are applied. The calculations are made with the uranium atom relativistic effective small core potential by Stuttgart-Cologne group (60 electrons in the core). The calculations include the U atom basis set optimization. Powell, Hooke-Jeeves, conjugated gradient and Box methods are implemented in the author's optimization package, being external to the codes for molecular and periodic calculations. The basis set optimization in LCAO calculations improves the agreement of the lattice parameter and bulk modulus of UN crystal with the experimental data, the change of the cohesive energy due to the optimization is small. The mixed metallic-covalent chemical bonding is found both in LCAO calculations of UN and U{sub 2}N{sub 3} crystals; UN{sub 2} crystal has the semiconducting nature.

Carbon dioxide sensor

Science.gov (United States)

Dutta, Prabir K [Worthington, OH; Lee, Inhee [Columbus, OH; Akbar, Sheikh A [Hilliard, OH

2011-11-15

The present invention generally relates to carbon dioxide (CO.sub.2) sensors. In one embodiment, the present invention relates to a carbon dioxide (CO.sub.2) sensor that incorporates lithium phosphate (Li.sub.3PO.sub.4) as an electrolyte and sensing electrode comprising a combination of lithium carbonate (Li.sub.2CO.sub.3) and barium carbonate (BaCO.sub.3). In another embodiment, the present invention relates to a carbon dioxide (CO.sub.2) sensor has a reduced sensitivity to humidity due to a sensing electrode with a layered structure of lithium carbonate and barium carbonate. In still another embodiment, the present invention relates to a method of producing carbon dioxide (CO.sub.2) sensors having lithium phosphate (Li.sub.3PO.sub.4) as an electrolyte and sensing electrode comprising a combination of lithium carbonate (Li.sub.2CO.sub.3) and barium carbonate (BaCO.sub.3).

The UC{sub 2−x} – Carbon eutectic: A laser heating study

Energy Technology Data Exchange (ETDEWEB)

Manara, D., E-mail: dario.manara@ec.europa.eu; Boboridis, K.; Morel, S.; De Bruycker, F.

2015-11-15

The UC{sub 2−x} – carbon eutectic has been studied by laser heating and fast multi-wavelength pyrometry under inert atmosphere. The study has been carried out on three compositions, two of which close to the phase boundary of the UC{sub 2−x} – C miscibility gap (with C/U atomic ratios 2 and 2.1), and one, more crucial, with a large excess of carbon (C/U = 2.82). The first two compositions were synthesised by arc-melting. This synthesis method could not be applied to the last composition, which was therefore completed directly by laser irradiation. The U – C – O composition of the samples was checked by using a combustion method in an ELTRA{sup ®} analyser. The eutectic temperature, established to be 2737 K ± 20 K, was used as a radiance reference together with the cubic – tetragonal (α → β) solid state transition, fixed at 2050 K ± 20 K. The normal spectral emissivity of the carbon-richer compounds increases up to 0.7, whereas the value 0.53 was established for pure hypostoichiometric uranium dicarbide at the limit of the eutectic region. This increase is analysed in the light of the demixing of excess carbon, and used for the determination of the liquidus temperature (3220 K ± 50 K for UC{sub 2.82}). Due to fast solid state diffusion, also fostered by the cubic – tetragonal transition, no obvious signs of a lamellar eutectic structure could be observed after quenching to room temperature. The eutectic surface C/UC{sub 2−x} composition could be qualitatively, but consistently, followed during the cooling process with the help of the recorded radiance spectra. Whereas the external liquid surface is almost entirely constituted by uranium dicarbide, it gets rapidly enriched in demixed carbon upon freezing. Demixed carbon seems to quickly migrate towards the inner bulk during further cooling. At the α → β transition, uranium dicarbide covers again the almost entire external surface. - Highlights: • The melting behaviour

Low energy electron irradiation induced carbon etching: Triggering carbon film reacting with oxygen from SiO{sub 2} substrate

Energy Technology Data Exchange (ETDEWEB)

Chen, Cheng [Institute of Nanosurface Science and Engineering (INSE), Shenzhen University, Shenzhen 518060 (China); Key Laboratory of Optoelectronic Devices and Systems of Ministry of Education and Guangdong Province, College of Optoelectronic Engineering, Shenzhen University, Shenzhen 518060 (China); Wang, Chao, E-mail: cwang367@szu.edu.cn, E-mail: dfdiao@szu.edu.cn; Diao, Dongfeng, E-mail: cwang367@szu.edu.cn, E-mail: dfdiao@szu.edu.cn [Institute of Nanosurface Science and Engineering (INSE), Shenzhen University, Shenzhen 518060 (China)

2016-08-01

We report low-energy (50–200 eV) electron irradiation induced etching of thin carbon films on a SiO{sub 2} substrate. The etching mechanism was interpreted that electron irradiation stimulated the dissociation of the carbon film and SiO{sub 2}, and then triggered the carbon film reacting with oxygen from the SiO{sub 2} substrate. A requirement for triggering the etching of the carbon film is that the incident electron penetrates through the whole carbon film, which is related to both irradiation energy and film thickness. This study provides a convenient electron-assisted etching with the precursor substrate, which sheds light on an efficient pathway to the fabrication of nanodevices and nanosurfaces.

All-Polymer Solar Cell Performance Optimized via Systematic Molecular Weight Tuning of Both Donor and Acceptor Polymers.

Science.gov (United States)

Zhou, Nanjia; Dudnik, Alexander S; Li, Ting I N G; Manley, Eric F; Aldrich, Thomas J; Guo, Peijun; Liao, Hsueh-Chung; Chen, Zhihua; Chen, Lin X; Chang, Robert P H; Facchetti, Antonio; Olvera de la Cruz, Monica; Marks, Tobin J

2016-02-03

The influence of the number-average molecular weight (Mn) on the blend film morphology and photovoltaic performance of all-polymer solar cells (APSCs) fabricated with the donor polymer poly[5-(2-hexyldodecyl)-1,3-thieno[3,4-c]pyrrole-4,6-dione-alt-5,5-(2,5-bis(3-dodecylthiophen-2-yl)thiophene)] (PTPD3T) and acceptor polymer poly{[N,N'-bis(2-octyldodecyl)naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} (P(NDI2OD-T2); N2200) is systematically investigated. The Mn effect analysis of both PTPD3T and N2200 is enabled by implementing a polymerization strategy which produces conjugated polymers with tunable Mns. Experimental and coarse-grain modeling results reveal that systematic Mn variation greatly influences both intrachain and interchain interactions and ultimately the degree of phase separation and morphology evolution. Specifically, increasing Mn for both polymers shrinks blend film domain sizes and enhances donor-acceptor polymer-polymer interfacial areas, affording increased short-circuit current densities (Jsc). However, the greater disorder and intermixed feature proliferation accompanying increasing Mn promotes charge carrier recombination, reducing cell fill factors (FF). The optimized photoactive layers exhibit well-balanced exciton dissociation and charge transport characteristics, ultimately providing solar cells with a 2-fold PCE enhancement versus devices with nonoptimal Mns. Overall, it is shown that proper and precise tuning of both donor and acceptor polymer Mns is critical for optimizing APSC performance. In contrast to reports where maximum power conversion efficiencies (PCEs) are achieved for the highest Mns, the present two-dimensional Mn optimization matrix strategy locates a PCE "sweet spot" at intermediate Mns of both donor and acceptor polymers. This study provides synthetic methodologies to predictably access conjugated polymers with desired Mn and highlights the importance of optimizing Mn for both polymer

Electronic and magnetic properties of organic conductors (DMET) sub 2 MBr sub 4 (M=Fe, Ga)

CERN Document Server

Enomoto, K; Enoki, T; Yamaura, J I

2003-01-01

(DMET) sub 2 MBr sub 4 (M=Fe, Ga) are isostructural organic conductors whose crystal structure consists of an alternate stacking of quasi one-dimensional chain-based donor layers and anion square lattices. The resistivity, ESR, magnetic susceptibility, magnetization, and magnetoresistance of these salts were investigated in order to clarify the correlation between the electronic structure and the magnetism. The electronic structures of both salts are metallic down to T sub M sub I - 40 K, below which a Mott insulating state is stabilized, accompanied by an SDW transition at T sub S sub D sub W - 25 K. The FeBr sub 4 salt with Fe sup 3 sup + (S=5/2) localized spins undergoes an antiferromagnetic transition at T sub N = 3.7 K. In the FeBr sub 4 salt, the magnetization curves, which show field-direction-dependent anomalies in addition to a spin-flop transition, are demonstrated to have a participation of donor pi-electron spins in the magnetization processes. The field dependence of the magnetoresistances below ...

Cyclic hydrogenation stability of γ-hydrides for Ti{sub 25}V{sub 35}Cr{sub 40} alloys doped with carbon

Energy Technology Data Exchange (ETDEWEB)

Shen, Chia-Chieh, E-mail: ccshen@saturn.yzu.edu.tw [Department of Mechanical Engineering, Yuan Ze University, Chungli 32003, Taiwan (China); Graduate School of Renewable Energy and Engineering, Yuan Ze University, Chungli 32003, Taiwan (China); Fuel Cell Center, Yuan Ze University, Chungli 32003, Taiwan (China); Li, Hsueh-Chih [Graduate School of Renewable Energy and Engineering, Yuan Ze University, Chungli 32003, Taiwan (China)

2015-11-05

An automatic Sievert's apparatus equipped with a temperature-programmed desorption spectrometer was constructed to study the stability of annealed Ti{sub 25}V{sub 35}Cr{sub 40}C{sub x} (x = 0 and 0.1) alloy under cyclic hydrogenation at 6 N H{sub 2}. The specimens were tested at 30 °C with a hydrogen loading of around 1.00 H/M, which enabled the phase transformation from β-to γ-hydrides. After 500 cycles, 83% and 90% of the initial hydrogen capacities were preserved for Ti{sub 25}V{sub 35}Cr{sub 40} and Ti{sub 25}V{sub 35}Cr{sub 40}C{sub 0.1}, respectively. Therefore, a small amount of C doping was effective in reducing the hydrogenation degradation of Ti{sub 25}V{sub 35}Cr{sub 40}. The hydrogenation degradation of Ti{sub 25}V{sub 35}Cr{sub 40} was examined by measuring the P–C isotherms, temperature-programmed desorption spectra, and X-ray diffraction patterns. The degradation was ascribed to intrinsic disproportionation, i.e., Ti{sub 0.25}V{sub 0.35}Cr{sub 0.40} + 0.88H{sub 2} → yTiH{sub 2} + Ti{sub 0.25−y}V{sub 0.35}Cr{sub 0.40}H{sub 1.76–2y}, where the coefficient y indicates the amount of Ti-rich precipitate. The better cyclic hydrogenation stability of Ti{sub 25}V{sub 35}Cr{sub 40}C{sub 0.1} was related to the suppression of intrinsic disproportionation by the presence of carbon atoms in the body-centered-cubic lattice. - Highlights: • The stability of γ-hydride for Ti{sub 25}V{sub 35}Cr{sub 40} alloys was examined for 500 cycles. • The γ-hydride of Ti{sub 25}V{sub 35}Cr{sub 40} alloy degraded by intrinsic disproportionation. • The disproportionation of γ-hydride can be suppressed through carbon inclusion.

Magnetic Fe{sub 2}MO{sub 4} (M:Fe, Mn) activated carbons: Fabrication, characterization and heterogeneous Fenton oxidation of methyl orange

Energy Technology Data Exchange (ETDEWEB)

Nguyen, Thi Dung [Institute of Chemical Technology, Vietnamese Academy of Science and Technology, 01 Mac Dinh Chi, District 1, Ho Chi Minh (Viet Nam); Phan, Ngoc Hoa [Department of Chemical Technology, Hochiminh University of Technology, 268 Ly Thuong Kiet, District 10, Ho Chi Minh (Viet Nam); Do, Manh Huy, E-mail: huydoma@vast-hcm.ac.vn [Institute of Chemical Technology, Vietnamese Academy of Science and Technology, 01 Mac Dinh Chi, District 1, Ho Chi Minh (Viet Nam); Ngo, Kim Tham [Institute of Chemical Technology, Vietnamese Academy of Science and Technology, 01 Mac Dinh Chi, District 1, Ho Chi Minh (Viet Nam); College of science, Can Tho University, 3/2, Can Tho (Viet Nam)

2011-01-30

We present a simple and efficient method for the fabrication of magnetic Fe{sub 2}MO{sub 4} (M:Fe and Mn) activated carbons (Fe{sub 2}MO{sub 4}/AC-H, M:Fe and Mn) by impregnating the activated carbon with simultaneous magnetic precursor and carbon modifying agent followed by calcination. The obtained samples were characterized by nitrogen adsorption isotherms, X-ray diffraction (XRD), scanning electron microscopy (SEM) and vibrating sample magnetometer (VSM), and the catalytic activity in heterogeneous Fenton oxidation of methyl orange (MO) was evaluated. The resulting Fe{sub 2}MnO{sub 4}/AC-H showed higher catalytic activity in the methyl orange oxidation than Fe{sub 3}O{sub 4}/AC-H. The effect of operational parameters (pH, catalyst loading H{sub 2}O{sub 2} dosage and initial MO concentration) on degradation performance of the oxidation process was investigated. Stability and reusability of selected catalyst were also tested.

Calcium Carbonate Precipitation for CO{sub 2} Storage and Utilization: A Review of the Carbonate Crystallization and Polymorphism

Energy Technology Data Exchange (ETDEWEB)

Chang, Ribooga; Kim, Semin; Lee, Seungin; Choi, Soyoung; Kim, Minhee; Park, Youngjune, E-mail: young@gist.ac.kr [Carbon and Energy Systems, School of Earth Sciences and Environmental Engineering, Gwangju Institute of Science and Technology (GIST), Gwangju (Korea, Republic of)

2017-07-10

The transformation of CO{sub 2} into a precipitated mineral carbonate through an ex situ mineral carbonation route is considered a promising option for carbon capture and storage (CCS) since (i) the captured CO{sub 2} can be stored permanently and (ii) industrial wastes (i.e., coal fly ash, steel and stainless-steel slags, and cement and lime kiln dusts) can be recycled and converted into value-added carbonate materials by controlling polymorphs and properties of the mineral carbonates. The final products produced by the ex situ mineral carbonation route can be divided into two categories—low-end high-volume and high-end low-volume mineral carbonates—in terms of their market needs as well as their properties (i.e., purity). Therefore, it is expected that this can partially offset the total cost of the CCS processes. Polymorphs and physicochemical properties of CaCO{sub 3} strongly rely on the synthesis variables such as temperature, pH of the solution, reaction time, ion concentration and ratio, stirring, and the concentration of additives. Various efforts to control and fabricate polymorphs of CaCO{sub 3} have been made to date. In this review, we present a summary of current knowledge and recent investigations entailing mechanistic studies on the formation of the precipitated CaCO{sub 3} and the influences of the synthesis factors on the polymorphs.

Preparation and characterization of Cu{sub x}O{sub 1-y}@ZnO{sub 1-α} nanocomposites for enhanced room-temperature NO{sub 2} sensing applications

Energy Technology Data Exchange (ETDEWEB)

Geng, Xin [College of Mechanical Engineering, Yangzhou University, Yangzhou 225127 (China); College of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou 225002 (China); Service de Science des Matériaux, Faculté Polytechnique, Université de Mons, Mons 7000 (Belgium); Zhang, Chao, E-mail: zhangc@yzu.edu.cn [College of Mechanical Engineering, Yangzhou University, Yangzhou 225127 (China); Luo, Yifan [College of Mechanical Engineering, Yangzhou University, Yangzhou 225127 (China); Debliquy, Marc [Service de Science des Matériaux, Faculté Polytechnique, Université de Mons, Mons 7000 (Belgium)

2017-04-15

Highlights: • Cu{sub x}O{sub 1-y}@ZnO{sub 1-(*)α} coatings with rich donor defects were successfully prepared. • Many p-n heterojunctions were formed in the as-sprayed Cu{sub x}O{sub 1-y}@ZnO{sub 1-α} coatings. • Light absorption of the coatings was extended to whole visible light region. • Cu{sub x}O{sub 1-y}@ZnO{sub 1-α} coatings showed an excellent response to NO{sub 2} at room temperature. - Abstract: In order to solve the problem that pristine ZnO show little response to NO{sub 2} gas at room temperature, some methods have been used, e.g., introducing narrow-bandgap semiconductors and donor defects into ZnO. In this work, we adopt solution precursor plasma spray to deposit Cu{sub x}O{sub 1-y}@ZnO{sub 1-α} hybrid coatings. Rapid heating and cooling as well as the reducing atmosphere provided by solution precursor plasma spray (SPPS) produce highly concentrated donor defects such as zinc interstitials and oxygen vacancies. X-ray photoelectron spectroscopy, photoluminescence spectroscopy and electron paramagnetic resonance confirmed that rich donor defects were present in the SPPS Cu{sub x}O{sub 1-y}@ZnO{sub 1-α} coatings. Field emission-scanning electron microscopy images exhibited a highly porous nanostructure, and high resolution-transmission electron microscopy showed that there were large amounts of p-n heterojunctions in the nanocomposites. The light absorption of the SPPS Cu{sub x}O{sub 1-y}@ZnO{sub 1-α} hybrids was extended up to the whole visible light region. With assistance of visible light illumination, the nanocomposites exhibited significant response to NO{sub 2} for concentrations below 1 ppm. A sensing mechanism of the Cu{sub x}O{sub 1-y}@ZnO{sub 1-α} sensors was proposed.

KPF{sub 6} dissolved in propylene carbonate as an electrolyte for activated carbon/graphite capacitors

Energy Technology Data Exchange (ETDEWEB)

Wang, Hongyu [State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, 5625 Renmin Street, Changchun 130022 (China); Yoshio, Masaki [Advanced Research Center, Saga University, 1341 Yoga-machi, Saga 840-0047 (Japan)

2010-02-15

KPF{sub 6} dissolved in propylene carbonate (PC) has been proposed as an electrolyte for activated carbon (AC)/graphite capacitors. The electrochemical performance of AC/graphite capacitor has been tested in XPF{sub 6}-PC or XBF{sub 4}-PC electrolytes (X stands for alkali or quaternary alkyl ammonium cations). The AC/graphite capacitor using KPF{sub 6}-PC electrolyte shows an excellent cycle-ability compared with other electrolytes containing alkali ions. The big decomposition of the PC solvent at the AC negative electrode is considerably suppressed in the case of KPF{sub 6}-PC, which fact has been correlated with the mild solvation of K{sup +} by PC solvent. The relationship between the ionic radius of cation and the corresponding specific capacitance of AC negative electrode also proves that PC-solvated K{sup +} ions are adsorbed on AC electrode instead of naked K{sup +} ions. (author)

Structural and compositional evolution of carbon-doped Ge{sub 2}Sb{sub 2}Te{sub 5} film under different annealing conditions

Energy Technology Data Exchange (ETDEWEB)

Kim, Ki-Hong; Kyoung, Yong-Koo; Yun, Dong-Jin [AS group, CAS center, SAIT, Samsung Electronics Co. Ltd., Yongin 446-712 (Korea, Republic of); Choi, Sang-Jun, E-mail: sangjun5545.choi@samsung.com [Device Architecture Lab, Semiconductor R and D center, Samsung Electronics Co. Ltd., Yongin 446-712 (Korea, Republic of)

2013-12-02

Changes in the microstructural and electrical properties of carbon-doped Ge{sub 2}Sb{sub 2}Te{sub 5} during thermal annealing under N{sub 2} and air atmospheres are investigated. The occurrence of compositional and structural changes was found to depend on the annealing conditions, and in particular, on the out-diffusion of germanium atoms. The thick oxidation layer generated during air annealing prevented germanium out-diffusion, leading to structural changes but no compositional changes. In contrast, germanium out-diffusion occurred during annealing under N{sub 2}, leading to compositional changes but preventing structural changes. - Highlights: • We investigate the stability of 10% carbon-doped Ge2Sb2Te5 alloys. • The compositional and structural changes depend on the annealing conditions. • Germanium out-diffusion occurs during N2 annealing, leading to compositional changes. • The oxidation layer generated during air annealing prevents germanium out-diffusion.

Donor-acceptor interaction between non-aqueous solvents and I{sub 2} to generate I{sup -}{sub 3}, and its implication in dye sensitized solar cells

Energy Technology Data Exchange (ETDEWEB)

Kebede, Zerihun [Department of Chemistry, Kotebe College of Teacher Education, P.O. Box 31248, Addis Ababa (Ethiopia); Lindquist, Sten-Eric [Department of Physical Chemistry, Uppsala University, P.O. Box 532, S-751 21 Uppsala (Sweden)

1999-03-16

The spectrophotometric properties of I{sup -}, I{sub 2} and the I{sup -}/I{sub 2} mixture were studied in 1,2-dichloroethane (DCE), acetone (AC), acetonitrile (ACN), ethanol (EtOH), methanol (MeOH), tertiary-butanol (t-BuOH), dimethylformamide (DMF), propylenecarbonate (PC), 3-methoxypropionitrile (MePN), dimethylsulfoxide (DMSO), dioxane (DIO) and pyridine (PY) solutions. From the investigation it has been realized that in DCE, I{sup -}, I{sub 2} and I{sup -}/I{sub 2} mixture have the same absorption peak at 500 nm. I{sup -} gives rise to the absorption spectra at about 220, 290 and 360 nm in t-BuOH and in PY solutions. However, in all other solvents the I{sup -} generates peaks only around 220 nm. Similarly I{sub 2} and the I{sup -}/I{sub 2} mixture in all solvents except DCE have indicated similar absorption peaks around 220, 290 and 360 nm. On the other hand, except in PC and DMF, I{sub 2} shows the additional peaks in the range of 380-500 nm which are assigned to the formation of a I{sub 2}-solvent complex. The peaks around 290 and 360 nm indicate the presence of I{sup -}{sub 3} and around 220 nm is the peak of I{sup -}. The spectral shift of the I{sub 2} solutions in the visible region is interesting and is the core of this report. It points to the importance of donor-acceptor interaction between solvents and iodine. The data obtained in these solvents were well correlated to the donor number (DN) of the solvents. From this correlation the DN of MePN was estimated to 14.6. The absorption peak of I{sub 2} in DCE(DN=0.0) is 500 nm and in PY(DN=33.1) is 378 nm. This peak shift due to solvent effects corresponds to an energy difference close to 0.8 eV. The absorption peak shift due to addition of the 0.0080 vol%. PY(1 mM) in 1 mM I{sub 2}-ACN solutions corresponds to ca. 0.6 eV. The blue shift of I{sub 2} absorption in basic solvents indicates the tendency to form a complex. The increase of the efficiency of the dye-sensitized solar cell by addition of PY to I

Direct view at colossal permittivity in donor-acceptor (Nb, In) co-doped rutile TiO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Mandal, Suman, E-mail: suman.mandal@sscu.iisc.ernet.in; Pal, Somnath; Hazarika, Abhijit [Solid State and Structural Chemistry Unit, Indian Institute of Science, Bengaluru 560012 (India); Kundu, Asish K.; Menon, Krishnakumar S. R. [Surface Physics and Material Science Division, Saha Institute of Nuclear Physics, Kolkata 700064 (India); Rioult, Maxime; Belkhou, Rachid [Synchrotron SOLEIL, L' Orme des Merisiers Saint-Aubin, 91192 Gif-sur-Yvette (France)

2016-08-29

Topical observations of colossal permittivity (CP) with low dielectric loss in donor-acceptor cations co-doped rutile TiO{sub 2} have opened up several possibilities in microelectronics and energy-storage devices. Yet, the precise origin of the CP behavior, knowledge of which is essential to empower the device integration suitably, is highly disputed in the literature. From spectromicroscopic approach besides dielectric measurements, we explore that microscopic electronic inhomogeneities along with the nano-scale phase boundaries and the low temperature polaronic relaxation are mostly responsible for such a dielectric behavior, rather than electron-pinned defect-dipoles/grain-boundary effects as usually proposed. Donor-acceptor co-doping results in a controlled carrier-hopping inevitably influencing the dielectric loss while invariably upholding the CP value.

MoS{sub 2}-coated microspheres of self-sensitized carbon nitride for efficient photocatalytic hydrogen generation under visible light irradiation

Energy Technology Data Exchange (ETDEWEB)

Gu, Quan [Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shaanxi Normal University, Xi’an, 710062 (China); School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore); Sun, Huaming; Xie, Zunyuan; Gao, Ziwei [Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, School of Chemistry and Chemical Engineering, Shaanxi Normal University, Xi’an, 710062 (China); Xue, Can, E-mail: cxue@ntu.edu.sg [School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore)

2017-02-28

Highlights: • Successful coating of MoS{sub 2} onto self-sensitized carbon nitride microspheres. • The carbon nitride@MoS{sub 2} core-shell structure show enhanced H{sub 2} generation in visible light. • Synergistic effect of surface dyes and MoS{sub 2} coating enhances photocatalytic activities. - Abstract: We have successfully coated the self-sensitized carbon nitride (SSCN) microspheres with a layer of MoS{sub 2} through a facile one-pot hydrothermal method by using (NH{sub 4}){sub 2}MoS{sub 4} as the precursor. The resulted MoS{sub 2}-coated SSCN photocatalyst appears as a core-shell structure and exhibits enhanced visible-light activities for photocatalytic H{sub 2} generation as compared to the un-coated SSCN and the standard g-C{sub 3}N{sub 4} reference with MoS{sub 2} coating. The photocatalytic test results suggest that the oligomeric s-triazine dyes on the SSCN surface can provide additional light-harvesting capability and photogenerated charge carriers, and the coated MoS{sub 2} layer can serve as active sites for proton reduction towards H{sub 2} evolution. This synergistic effect of surface triazine dyes and MoS{sub 2} coating greatly promotes the activity of carbon nitride microspheres for vishible-light-driven H{sub 2} generation. This work provides a new way of future development of low-cost noble-metal-free photocatalysts for efficient solar-driven hydrogen production.

Solubility of AnO{sub 2}.xH{sub 2}O(am) in carbonate solution and formation of ternary An(IV) hydroxide-carbonate complexes

Energy Technology Data Exchange (ETDEWEB)

Neck, V.; Altmaier, M. [Institut fuer Nukleare Entsorgung, Forschungszentrum Karlsruhe, Postfach 3640, D-76021 Karlsruhe (Germany); Fanghaenel, Th. [Institut fuer Nukleare Entsorgung, Forschungszentrum Karlsruhe, Postfach 3640, D-76021 Karlsruhe (Germany); Physikalisch-Chemisches Institut, Ruprecht-Karls-Universitaet, Im Neuenheimer Feld 253, D-69120 Heidelberg (Germany)

2005-07-01

Full text of publication follows: The solubility of amorphous An(IV) hydroxides or hydrous oxides is studied with Th(IV) as a redox-stable surrogate for the other tetravalent actinides at I = 0.1 - 4 M (NaHCO{sub 3}-Na{sub 2}CO{sub 3}-NaOHNaCl) and 22 deg. C. Several series of closed system experiments at total carbonate concentrations of C{sub tot} = [HCO{sub 3}{sup -}] + [CO{sub 3}{sup 2-}] = 0.02 and 0.1 M in the range pH{sub c} = 8 - 13 and in Na{sub 2}CO{sub 3}-NaOH mixtures are performed with Th(IV) and additionally with Pu(IV). In our recent study with Th(IV) at I = 0.5 M [1], the simultaneous evaluation of solubility data at widely varied pH and carbonate concentrations has shown that Th(OH)(CO{sub 3}){sub 4}{sup 5-}, Th(OH){sub 2}(CO{sub 3}){sub 2}{sup 2-} and Th(OH){sub 4}(CO{sub 3}){sup 2-} are the most important ternary complexes. The present results at I = 0.1 - 4 M are used to describe the ionic strength dependence of the equilibrium constants log K{sub s,1yz} = log K{sub sp} + log {beta}{sub 1yz} for the reactions An(OH){sub 4}(am) + z CO{sub 3}{sup 2-} {r_reversible} An(OH){sub y}(CO{sub 3}){sub z}{sup 4-y-2z} + (4-y) OH{sup -}. Using the evaluated ion interaction (SIT) coefficients, available solubility data for U(IV), Np(IV) and Pu(IV) in wide ranges of pH, carbonate concentration and ionic strength, in particular apparently conflicting literature data for Np(IV) [2, 3] and Pu(IV) [2, 4], can be described with a consistent set of equilibrium constants. The predominant complexes An(OH){sub y}(CO{sub 3}){sub z}{sup 4-y-2z} and their formation constants log {beta}{sup 0}{sub 1yz} show pronounced analogies and systematic tendencies in the series Th(IV)-U(IV)-Np(IV)-Pu(IV). [1] Altmaier, M., Neck, V., Mueller, R., Fanghaenel, Th., Radiochim. Acta 93 (2005), in press.; [2] Rai, D., Hess, N.J., Felmy, A.R., Moore, D.A., Yui, M., Vitorge, P., a) Radiochim. Acta 84 (1999), 159, b) Radiochim. Acta 86 (1999), 89.; [3] Kitamura, A., Kohara, Y., J. Nucl

3D hierarchical dandelion-like NiCo{sub 2}O{sub 4}/N-doped carbon/Ni foam for an effective binder-free supercapacitor electrode

Energy Technology Data Exchange (ETDEWEB)

Xu, Xiaoyang; Hong, Wei; Zhao, Huilin; Song, Yahui; Qiu, Haixia, E-mail: haixiaqiuls@163.com; Gao, Jianping

2017-01-15

In this work, the 3D hierarchical dandelion-like NiCo{sub 2}O{sub 4}/N-doped carbon/Ni foam has been developed by introducing PANI as the precursor of N-doped carbon. Meanwhile, the NiCo{sub 2}O{sub 4}/N-doped carbon/Ni foam with a novel 3D hierarchical dandelion-like structure was verified by X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy, etc. In addition, the NiCo{sub 2}O{sub 4}/N-doped carbon/Ni foam was directly used as a binder-free supercapacitor electrode and its performances were investigated by cycle voltammetry, galvanostatic charge–discharge and electrochemical impedance spectroscopy. The results show that the obtained NiCo{sub 2}O{sub 4}/N-doped carbon/Ni foam electrode owns good electrochemical performances, such as high specific capacitance (864 F/g at 1 A/g) and good cycling stability, owing to the porous feature from its novel 3D hierarchical dandelion-like structure. - Highlights: • The 3D hierarchical dandelion-like NiCo{sub 2}O{sub 4}/N-doped carbon/Ni foam was prepared. • It can be directly used as a binder-free supercapacitor electrode. • It owns good electrochemical performances.

CO{sub 2} and CH{sub 4} fluxes and carbon balance in the atmospheric interaction of boreal peatlands

Energy Technology Data Exchange (ETDEWEB)

Alm, J

1998-12-31

Release of CO{sub 2} from peat was studied using IR analyzer in a range of boreal peatlands under varying nutrient status and moisture conditions. Root associated CO{sub 2} efflux was separated from the total release by experiments both in the field and in a greenhouse. Emissions of CO{sub 2} and CH{sub 4} (the latter by gas chromatography) were measured during the snow-covered period and their contribution to the annual fluxes of these gases was inspected. Ecosystem exchange of CO{sub 2} under varying irradiation, temperature and moisture conditions was measured at different microsites at two peatland sites with different nutrient ecology. One site represented minerotrophic conditions during a wet growing season and the other site ombrotrophic conditions during an exceptionally dry growing season. Annual carbon balances were compiled for the two sites, and the role of the microsites in the annual carbon balance and CH{sub 4} release was studied. The Holocene history of CO{sub 2} sequestration and CH{sub 4} emission dynamics in a raised mire were simulated using lateral and vertical growth rates derived from radiocarbon ages of peat samples from mire bottom and vertical cores. The model was formulated for a geographic information system (GIS). Artificial or natural lowering of water table increased CO{sub 2} release from peat. A drought lasting from late May to July caused a 90 g C m{sup 2} net loss in the annual C balance of a natural ombrotrophic bog. In drained forested sites the increase in peat CO{sub 2} release could be even 100 %, but the development of the tree layer at least partially compensated for these losses. Wet conditions induced a net accumulation of 67 g C m{sup -2}a{sup -1} in the minerotrophic fen site, while the long term average accumulation rate is estimated to be only 15 g C m{sup -2}a{sup -1} for Finnish fens. Carbon balance in boreal peatlands is thus extremely sensitive to year-to-year climatic variations. Root activity of vascular plants

CO{sub 2} and CH{sub 4} fluxes and carbon balance in the atmospheric interaction of boreal peatlands

Energy Technology Data Exchange (ETDEWEB)

Alm, J.

1997-12-31

Release of CO{sub 2} from peat was studied using IR analyzer in a range of boreal peatlands under varying nutrient status and moisture conditions. Root associated CO{sub 2} efflux was separated from the total release by experiments both in the field and in a greenhouse. Emissions of CO{sub 2} and CH{sub 4} (the latter by gas chromatography) were measured during the snow-covered period and their contribution to the annual fluxes of these gases was inspected. Ecosystem exchange of CO{sub 2} under varying irradiation, temperature and moisture conditions was measured at different microsites at two peatland sites with different nutrient ecology. One site represented minerotrophic conditions during a wet growing season and the other site ombrotrophic conditions during an exceptionally dry growing season. Annual carbon balances were compiled for the two sites, and the role of the microsites in the annual carbon balance and CH{sub 4} release was studied. The Holocene history of CO{sub 2} sequestration and CH{sub 4} emission dynamics in a raised mire were simulated using lateral and vertical growth rates derived from radiocarbon ages of peat samples from mire bottom and vertical cores. The model was formulated for a geographic information system (GIS). Artificial or natural lowering of water table increased CO{sub 2} release from peat. A drought lasting from late May to July caused a 90 g C m{sup 2} net loss in the annual C balance of a natural ombrotrophic bog. In drained forested sites the increase in peat CO{sub 2} release could be even 100 %, but the development of the tree layer at least partially compensated for these losses. Wet conditions induced a net accumulation of 67 g C m{sup -2}a{sup -1} in the minerotrophic fen site, while the long term average accumulation rate is estimated to be only 15 g C m{sup -2}a{sup -1} for Finnish fens. Carbon balance in boreal peatlands is thus extremely sensitive to year-to-year climatic variations. Root activity of vascular plants

THE OPTIMAL ROTATIONS OF GMELINA STAND ON TWO CARBON PROJECTS: LENGTHENING ROTATION AND AFFORESTATION

Directory of Open Access Journals (Sweden)

Yonky Indrajaya

2016-12-01

Full Text Available Forest plantation may contribute economically and socially as a provider of wood raw materials for industry and providing jobs for local people. In addition, forest plantation may also contribute as watershed protection and carbon sequestration. Projects on carbon sequestration from plantation forest can be conducted in two types: (1 afforestation and (2 lengthening forest rotation. One of the potential carbon markets operationalized in the field is voluntary market with Verified Carbon Standard mechanism. This study aimed to analyze the optimal rotations of gmelina forests on two carbon projects: lengthening rotation and afforestation. The method used in this study was by using Hartman model ( i.e. Faustmann by maximizing profit with the revenue source from timber and carbon sequestration project. The results of this study showed that carbon price will affect the optimal rotation for lengthening forest rotation of VCS project. Meanwhile, for VCS afforestation project, carbon price had no effect on the optimal rotation on gmelina forest. The NPV value of afforestation project was relatively higher than that of NPV value of lengthening forest rotation project, since the amount of carbon that can be credited relatively higher in afforestation project.

Effect of ZnCl{sub 2} activation on CO{sub 2} adsorption of N-doped nanoporous carbons from polypyrrole

Energy Technology Data Exchange (ETDEWEB)

Meng, Long-Yue [Department of Chemical Engineering, Yanbian University, Yanji 133002 (China); Department of Chemistry, Inha University, 253 Nam-gu, Incheon 402-751 (Korea, Republic of); Park, Soo-Jin, E-mail: sjpark@inha.ac.kr [Department of Chemistry, Inha University, 253 Nam-gu, Incheon 402-751 (Korea, Republic of)

2014-10-15

In this study, N-doping nanoporous carbons (NNCs) were prepared from polypyrrole (PPY) by ZnCl{sub 2} activation. The activation process was carried out under set conditions (PPY/ZnCl{sub 2}=1/4) at 300–800 °C for 2 h. With increasing activation temperature, the specific surface area and total pore volume of the NNCs increased significantly from 539 m{sup 2}/g (300 °C) to 1268 m{sup 2}/g (700 °C) and from 0.245 cm{sup 3}/g (300 °C) to 0.561 cm{sup 3}/g (700 °C), respectively. In addition, the use of PPY carbon precursors allowed the integration of high N content (9.28 wt%) and resulted in a large narrow micropore distribution (<1 nm) in the prepared NNCs. The CO{sub 2} adsorption isotherms showed that PZ-600 exhibited the best CO{sub 2} adsorption capacity of 167 mg/g at 1 bar and 25 °C when the activation temperature was 600 °C. - Graphical abstract: CO{sub 2}/298 K adsorption/desorption isotherms of the N-enriched porous carbons. - Highlights: • N-doping nanoporous carbons were prepared from polypyrrole by ZnCl{sub 2} activation. • Through ZnCl{sub 2} activation, the specific surface area and total pore volume increased. • PZ-600 exhibited the best CO{sub 2} adsorption capacity of 167 mg/g at 1 bar and 25 °C.

Donor impurity-related optical absorption spectra in GaAs-Ga{sub 1-x}Al{sub x}As quantum wells: hydrostatic pressure and {gamma}-X conduction band mixing effects

Energy Technology Data Exchange (ETDEWEB)

Mora-Ramos, M.E. [Facultad de Ciencias, Universidad Autonoma del Estado de Morelos, Av. Universidad 1001, C.P. 62209, Cuernavaca, MOR (Mexico); Inst. de Ciencia de Materiales de Madrid, CSIC, Sor Juana Ines de la Cruz 3, 28049 Madrid (Spain); Lopez, S.Y. [Fac. de Educacion, Universidad de Antioquia, AA 1226, Medellin (Colombia); Duque, C.A. [Inst. de Fisica, Universidad de Antioquia, AA 1226, Medellin (Colombia); Velasco, V.R. [Inst. de Ciencia de Materiales de Madrid, CSIC, Sor Juana Ines de la Cruz 3, 28049 Madrid (Spain)

2007-07-01

Using a variational procedure within the effective mass approximation, the mixing between the {gamma} and X conduction band valleys in GaAs-Ga{sub 1-x}Al{sub x}As quantum wells is investigated by taking into account the effect of applied hydrostatic pressure. Some optical properties such as donor and/or acceptor binding energy and impurity-related transition energies are calculated and comparisons with available experimental data are presented. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Controllable synthesis of Co{sub 3}O{sub 4}/polyethyleneimine-carbon nanotubes nanocomposites for CO and NH{sub 3} gas sensing at room temperature

Energy Technology Data Exchange (ETDEWEB)

Lin, Yufei [Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, School of Chemistry and Materials Science, Heilongjiang University, Harbin 150080 (China); Kan, Kan [Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, School of Chemistry and Materials Science, Heilongjiang University, Harbin 150080 (China); Institute of Advanced Technology, Heilongjiang Academy of Sciences, Harbin 150000 (China); Song, Wanzhen; Zhang, Guo; Dang, Lifang [Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, School of Chemistry and Materials Science, Heilongjiang University, Harbin 150080 (China); Xie, Yu [Department of Materials Chemistry, Nanchang Hangkong University, Nanchang 330063 (China); Shen, Peikang [Department of Physics and Engineering, Sun Yat-sen University, Guangzhou 510275 (China); Li, Li, E-mail: llwjjhlju@sina.cn [Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, School of Chemistry and Materials Science, Heilongjiang University, Harbin 150080 (China); Key Laboratory of Chemical Engineering Process & Technology for High-efficiency Conversion, School of Chemistry and Materials Science, Heilongjiang University, Harbin 150080 (China); Shi, Keying, E-mail: shikeying2008@163.com [Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, School of Chemistry and Materials Science, Heilongjiang University, Harbin 150080 (China)

2015-08-05

Graphical abstract: Co{sub 3}O{sub 4}/polyethyleneimine-carbon nanotubes composites (CoPCNTs) have been successfully controllable synthesized via hydrothermal method at different temperature. The CoPCNTs sensors exhibited the highest response to CO and NH{sub 3} gases with response time of 4 s and 4.3 s, low detection limit of 5 ppm and 1 ppm at room temperature, respectively. The enhanced gas sensing could be ascribed to the synergistic effect between the tiny size of Co{sub 3}O{sub 4} and good conductivity of carbon nanotubes functionalized by polyethyleneimine. - Highlights: • The CNTs functionalized by polyethyleneimine provided a new functional structural. • The novel 1D structure could capture and migrate electrons quickly. • The Co{sub 3}O{sub 4} nanoparticles liked a snake winding around CNTs. • The gas sensor could work at room temperatures, which suit to practical application. - Abstract: A novel 1D Co{sub 3}O{sub 4}/polyethyleneimine-carbon nanotubes composites (CoPCNTs) have been successfully synthesized via hydrothermal method at different temperature. The CNTs functionalized by polyethyleneimine (PCNTs) provided a new material with new structural and functional properties. The PCNTs was used as loading guider and electron transfer path. The Co{sub 3}O{sub 4} nanoparticles (NPs) loaded on the PCNTs surface liked a snake winding around CNTs, and the size was about 5–10 nm. The gas sensing characteristics of the CoPCNTs sensors to carbon monoxide (CO) and ammonia (NH{sub 3}) were evaluated with different gas concentration. The CoPCNTs sensors grown at 160 °C exhibited the highest response to CO and NH{sub 3} gases with response time of 4 s and 4.3 s at room temperature (RT), respectively. Hence, the approach developed in this work would be important for the low-cost and large-scale production of the CoPCNTs materials with highly promising applications in gas sensors.

DFT investigation of NH{sub 3}, PH{sub 3}, and AsH{sub 3} adsorptions on Sc-, Ti-, V-, and Cr-doped single-walled carbon nanotubes

Energy Technology Data Exchange (ETDEWEB)

Buasaeng, Prayut; Rakrai, Wandee [Computational Chemistry Center for Nanotechnology and Department of Chemistry, Faculty of Science and Technology, Rajabhat Maha Sarakham University, Maha Sarakham, 44000 (Thailand); Wanno, Banchob [Center of Excellence for Innovation in Chemistry and Supramolecular Chemistry Research Unit, Department of Chemistry, Faculty of Science, Mahasarakham University, Maha Sarakham, 44150 (Thailand); Tabtimsai, Chanukorn, E-mail: tabtimsai.c@gmail.com [Computational Chemistry Center for Nanotechnology and Department of Chemistry, Faculty of Science and Technology, Rajabhat Maha Sarakham University, Maha Sarakham, 44000 (Thailand)

2017-04-01

Highlights: • Transition metal-doped single wall carbon nanotubes and their adsorption with NH{sub 3}, PH{sub 3} and AsH{sub 3} molecules were investigated using a DFT method. • Adsorptions of NH{sub 3}, PH{sub 3} and AsH{sub 3} molecules on pristine single wall carbon nanotubeswere improved by transition metal doping. • Structural and electronic properties of single wall carbon nanotubes were significantly changed by transition metal doping and gas adsorptions. - Abstract: The adsorption properties of ammonia (NH{sub 3}), phosphine (PH{sub 3}), and arsine (AsH{sub 3}) on pristine and transition metal- (TM = Sc, Ti, V, and Cr) doped (5,5) armchair single-walled carbon nanotubes (SWCNTs) were theoretically investigated. The geometric and electronic properties and adsorption abilities for the most stable configuration of NH{sub 3}, PH{sub 3}, and AsH{sub 3} adsorptions on pristine and TM-doped SWCNTs were calculated. It was found that the binding abilities of TMs to the SWCNT were in the order: Cr > V > Sc > Ti. However, the adsorption energy showed that the pristine SWCNT weakly adsorbed gas molecules and its electronic properties were also insensitive to gas molecules. By replacing a C atom with TM atoms, all doping can significantly enhance the adsorption energy of gas/SWCNT complexes and their adsorption ability was in the same order: NH{sub 3} > PH{sub 3} > AsH{sub 3}. A remarkable increase in adsorption energy and charge transfer of these systems was expected to induce significant changes in the electrical conductivity of the TM-doped SWCNTs. This work revealed that the sensitivity of SWCNT-based chemical gas adsorptions and sensors can be greatly improved by introducing an appropriate TM dopant. Accordingly, TM-doped SWCNTs are more suitable for gas molecule adsorptions and detections than the pristine SWCNT.

An efficient one-step condensation and activation strategy to synthesize porous carbons with optimal micropore sizes for highly selective CO₂ adsorption.

Science.gov (United States)

Wang, Jiacheng; Liu, Qian

2014-04-21

A series of microporous carbons (MPCs) were successfully prepared by an efficient one-step condensation and activation strategy using commercially available dialdehyde and diamine as carbon sources. The resulting MPCs have large surface areas (up to 1881 m(2) g(-1)), micropore volumes (up to 0.78 cm(3) g(-1)), and narrow micropore size distributions (0.7-1.1 nm). The CO₂ uptakes of the MPCs prepared at high temperatures (700-750 °C) are higher than those prepared under mild conditions (600-650 °C), because the former samples possess optimal micropore sizes (0.7-0.8 nm) that are highly suitable for CO₂ capture due to enhanced adsorbate-adsorbent interactions. At 1 bar, MPC-750 prepared at 750 °C demonstrates the best CO₂ capture performance and can efficiently adsorb CO₂ molecules at 2.86 mmol g(-1) and 4.92 mmol g(-1) at 25 and 0 °C, respectively. In particular, the MPCs with optimal micropore sizes (0.7-0.8 nm) have extremely high CO₂/N₂ adsorption ratios (47 and 52 at 25 and 0 °C, respectively) at 1 bar, and initial CO₂/N₂ adsorption selectivities of up to 81 and 119 at 25 °C and 0 °C, respectively, which are far superior to previously reported values for various porous solids. These excellent results, combined with good adsorption capacities and efficient regeneration/recyclability, make these carbons amongst the most promising sorbents reported so far for selective CO₂ adsorption in practical applications.

Origin of major donor states in In–Ga–Zn oxide

Energy Technology Data Exchange (ETDEWEB)

Nakashima, Motoki; Oota, Masashi; Ishihara, Noritaka; Nonaka, Yusuke; Hirohashi, Takuya; Takahashi, Masahiro; Yamazaki, Shunpei [Semiconductor Energy Laboratory Co., Ltd., 398 Hase, Atsugi, Kanagawa 243-0036 (Japan); Obonai, Toshimitsu; Hosaka, Yasuharu; Koezuka, Junichi [Advanced Film Device Inc., 161-2 Masuzuka, Tsuga-machi, Tochigi, Tochigi 328-0114 (Japan)

2014-12-07

To clarify the origin of the major donor states in indium gallium zinc oxide (IGZO), we report measurement results and an analysis of several physical properties of IGZO thin films. Specifically, the concentration of H atoms and O vacancies (V{sub O}), carrier concentration, and conductivity are investigated by hard X-ray photoelectron spectroscopy, secondary ion mass spectroscopy, thermal desorption spectroscopy, and Hall effect measurements. The results of these experiments suggest that the origin of major donor states is H occupancy of V{sub O} sites. Furthermore, we use first-principles calculations to investigate the influence of the coexistence of V{sub O} and H in crystalline InGaO{sub 3}(ZnO){sub m} (m = 1). The results indicate that when H is trapped in V{sub O}, a stable complex is created that serves as a shallow-level donor.

Impact of CO<sub>2sub> on the Evolution of Microbial Communities Exposed to Carbon Storage Conditions, Enhanced Oil Recovery, and CO<sub>2sub> Leakage

Energy Technology Data Exchange (ETDEWEB)

Gulliver, Djuna M. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Gregory, Kelvin B. [Carnegie Mellon Univ., Pittsburgh, PA (United States). Dept. of Civil and Environmental Engineering; Lowry, Gregory V. [Carnegie Mellon Univ., Pittsburgh, PA (United States). Dept. of Civil and Environmental Engineering

2016-06-20

Geologic carbon storage (GCS) is a crucial part of a proposed mitigation strategy to reduce the anthropogenic carbon dioxide (CO<sub>2sub>) emissions to the atmosphere. During this process, CO<sub>2sub> is injected as super critical carbon dioxide (SC-CO<sub>2sub>) in confined deep subsurface storage units, such as saline aquifers and depleted oil reservoirs. The deposition of vast amounts of CO<sub>2sub> in subsurface geologic formations could unintentionally lead to CO<sub>2sub> leakage into overlying freshwater aquifers. Introduction of CO<sub>2sub> into these subsurface environments will greatly increase the CO<sub>2sub> concentration and will create CO<sub>2sub> concentration gradients that drive changes in the microbial communities present. While it is expected that altered microbial communities will impact the biogeochemistry of the subsurface, there is no information available on how CO<sub>2sub> gradients will impact these communities. The overarching goal of this project is to understand how CO<sub>2sub> exposure will impact subsurface microbial communities at temperatures and pressures that are relevant to GCS and CO<sub>2sub> leakage scenarios. To meet this goal, unfiltered, aqueous samples from a deep saline aquifer, a depleted oil reservoir, and a fresh water aquifer were exposed to varied concentrations of CO<sub>2sub> at reservoir pressure and temperature. The microbial ecology of the samples was examined using molecular, DNA-based techniques. The results from these studies were also compared across the sites to determine any existing trends. Results reveal that increasing CO<sub>2sub> leads to decreased DNA concentrations regardless of the site, suggesting that microbial processes will be significantly hindered or absent nearest the CO<sub>2sub> injection/leakage plume where CO<sub>2sub> concentrations are highest. At CO<sub>2sub> exposures expected downgradient from the CO<sub>2sub> plume, selected microorganisms

Impact of CO<sub>2sub> on the Evolution of Microbial Communities Exposed to Carbon Storage Conditions, Enhanced Oil Recovery, and CO<sub>2sub> Leakage

Energy Technology Data Exchange (ETDEWEB)

Gulliver, Djuna [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Gregory, Kelvin B. [Carnegie Mellon Univ., Pittsburgh, PA (United States); Lowry, Gregorgy V. [Carnegie Mellon Univ., Pittsburgh, PA (United States)

2016-06-20

Geologic carbon storage (GCS) is a crucial part of a proposed mitigation strategy to reduce the anthropogenic carbon dioxide (CO<sub>2sub>) emissions to the atmosphere. During this process, CO<sub>2sub> is injected as super critical carbon dioxide (SC-CO<sub>2sub>) in confined deep subsurface storage units, such as saline aquifers and depleted oil reservoirs. The deposition of vast amounts of CO<sub>2sub> in subsurface geologic formations could unintentionally lead to CO<sub>2sub> leakage into overlying freshwater aquifers. Introduction of CO<sub>2sub> into these subsurface environments will greatly increase the CO<sub>2sub>2 concentration and will create CO<sub>2sub> concentration gradients that drive changes in the microbial communities present. While it is expected that altered microbial communities will impact the biogeochemistry of the subsurface, there is no information available on how CO<sub>2sub> gradients will impact these communities. The overarching goal of this project is to understand how CO<sub>2sub> exposure will impact subsurface microbial communities at temperatures and pressures that are relevant to GCS and CO<sub>2sub> leakage scenarios. To meet this goal, unfiltered, aqueous samples from a deep saline aquifer, a depleted oil reservoir, and a fresh water aquifer were exposed to varied concentrations of CO<sub>2sub> at reservoir pressure and temperature. The microbial ecology of the samples was examined using molecular, DNA-based techniques. The results from these studies were also compared across the sites to determine any existing trends. Results reveal that increasing CO<sub>2sub> leads to decreased DNA concentrations regardless of the site, suggesting that microbial processes will be significantly hindered or absent nearest the CO<sub>2sub> injection/leakage plume where CO<sub>2sub> concentrations are highest. At CO<sub>2sub> exposures expected downgradient from the CO<sub>2sub> plume, selected microorganisms

Synthesis of porous carbon-doped g-C{sub 3}N{sub 4} nanosheets with enhanced visible-light photocatalytic activity

Energy Technology Data Exchange (ETDEWEB)

Bao, Nan, E-mail: baonan@sdu.edu.cn [School of Environmental Science and Engineering, Shandong Key Laboratory of Water Pollution Control and Resource Reuse, Shandong University, Shanda South Road 27, Jinan 250100 (China); Hu, Xinde [School of Environmental Science and Engineering, Shandong Key Laboratory of Water Pollution Control and Resource Reuse, Shandong University, Shanda South Road 27, Jinan 250100 (China); Zhang, Qingzhe [Institut National de la Recherche Scientifique (INRS), Centre Énergie Materiaux et Télécommunications, Université du Québec, 1650 Boulevard Lionel-Boulet, Varennes, Québec, J3X 1S2, Canada (Canada); Miao, Xinhan; Jie, Xiuyan; Zhou, Shuai [School of Environmental Science and Engineering, Shandong Key Laboratory of Water Pollution Control and Resource Reuse, Shandong University, Shanda South Road 27, Jinan 250100 (China)

2017-05-01

Highlights: • NSs-APAM photocatalysts were synthesized by a green and handy route. • APAM was used as the intercalator and carbon source in the preparation. • The combination of photo-induced charge carriers was greatly restrained. • Significantly enhanced visible-light photocatalytic activity was witnessed. • The NSs-APAM also showed a good recycling stability. - Abstract: The porous carbon-doped g-C{sub 3}N{sub 4} nanosheets photocatalysts (NSs-APAM) were synthesized using anionic polyacrylamide (APAM) as the intercalator and carbon source via the thermal treatment method. The as-prepared samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FT-IR), nitrogen adsorption, X-ray photoelectron spectroscopy (XPS), UV–vis diffuse reflectance absorption spectra (UV-DRS) and photoluminescence spectroscopy (PL). The results indicate that the APAM can effectively induce the formation of high-quality nanosheets (NSs) with narrowed bandgap. The specific surface area of NSs-APAM is 118.6 m{sup 2}/g, which is 5-fold larger than bulk g-C{sub 3}N{sub 4}. The carbon doping could narrow the bandgap, from 2.75 eV of g-C{sub 3}N{sub 4} NSs without carbon doping (NSs-Water) to 2.41 eV of NSs-APAM. The two-dimensional NSs structure facilitates the charge separation by shortening the diffusion distance to the surface of photocatalysts. The synergic effects of the carbon doping and unique structural properties contributed to the superior photocatalytic activity of NSs-APAM with 95% degradation rate towards X–3 B after 30 min visible-light irradiation.

A PROCEDURE FOR DETERMINING OPTIMAL FACILITY LOCATION AND SUB-OPTIMAL POSITIONS

Directory of Open Access Journals (Sweden)

P.K. Dan

2012-01-01

Full Text Available

ENGLISH ABSTRACT: This research presents a methodology for determining the optimal location of a new facility, having physical flow interaction of various degrees with other existing facilities in the presence of barriers impeding the shortest flow-path as well as the sub-optimal iso-cost positions. It also determines sub-optimal iso-cost positions with additional cost or penalty for not being able to site it at the computed optimal point. The proposed methodology considers all types of quadrilateral barrier or forbidden region configurations to generalize and by-pass such impenetrable obstacles, and adopts a scheme of searching through the vertices of the quadrilaterals to determine the alternative shortest flow-path. This procedure of obstacle avoidance is novel. Software has been developed to facilitate computations for the search algorithm to determine the optimal and iso-cost co-ordinates. The test results are presented.

AFRIKAANSE OPSOMMING: Die navorsing behandel ‘n procedure vir die bepaling van optimum stigtingsposisie vir ‘n onderneming met vloei vanaf ander bestaande fasiliteite in die teenwoordigheid van ‘n verskeidenheid van randvoorwaardes. Die prodedure lewer as resultaat suboptimale isokoste-stigtingsplekke met bekendmaking van die koste wat onstaan a.g.v. afwyking van die randvoorwaardlose optimum oplossingskoste, die prosedure maak gebruik van ‘n vindingryke soekmetode wat toegepas word op niersydige meerkundige voorstellings vir die bepaling van korste roetes wat versperring omseil. Die prosedure word onderskei deur programmatuur. Toetsresultate word voorgehou.

Integrated Energy System with Beneficial Carbon Dioxide (CO{sub 2}) Use

Energy Technology Data Exchange (ETDEWEB)

Sun, Xiaolei; Rink, Nancy

2011-04-30

To address the public concerns regarding the consequences of climate change from anthropogenic carbon dioxide (CO{sub 2}) emissions, the U.S. Department of Energy National Energy Technology Laboratory (DOE-NETL) is actively funding a CO{sub 2} management program to develop technologies capable of reducing the CO{sub 2} emissions from fossil fuel power plants and other industrial facilities. Over the past decade, this program has focused on reducing the costs of carbon capture and storage technologies. Recently, DOE-NETL launched an alternative CO{sub 2} mitigation program focusing on beneficial CO{sub 2} reuse and supporting the development of technologies that mitigate emissions by converting CO{sub 2} to solid mineral form that can be utilized for enhanced oil recovery, in the manufacturing of concrete or as a benign landfill, in the production of valuable chemicals and/or fuels. This project was selected as a CO{sub 2} reuse activity which would conduct research and development (R&D) at the pilot scale via a cost-shared Cooperative Agreement number DE-FE0001099 with DOE-NETL and would utilize funds setaside by the American Recovery and Reinvestment Act (ARRA) of 2009 for Industrial Carbon Capture and Sequestration R&D,

Microscopic unravelling of nano-carbon doping in MgB{sub 2} superconductors fabricated by diffusion method

Energy Technology Data Exchange (ETDEWEB)

Wong, D.C.K. [School of Physics, The University of Sydney, New South Wales 2006 (Australia); Yeoh, W.K. [School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, New South Wales 2006 (Australia); Australian Centre for Microscopy & Microanalysis, The University of Sydney, New South Wales 2006 (Australia); De Silva, K.S.B. [Institute for Superconducting & Electronic Materials, University of Wollongong, North Wollongong, New South Wales 2500 (Australia); Institute for Nanoscale Technology, Faculty of Science, University of Technology Sydney, Ultimo, New South Wales 2007 (Australia); Kondyurin, A.; Bao, P. [School of Physics, The University of Sydney, New South Wales 2006 (Australia); Li, W.X. [School of Materials Science and Engineering, Shanghai University, Shanghai 200072 (China); Xu, X.; Peleckis, G.; Dou, S.X. [Institute for Superconducting & Electronic Materials, University of Wollongong, North Wollongong, New South Wales 2500 (Australia); Ringer, S.P. [School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, New South Wales 2006 (Australia); Australian Centre for Microscopy & Microanalysis, The University of Sydney, New South Wales 2006 (Australia); Zheng, R.K., E-mail: rongkun.zheng@sydney.edu.au [School of Physics, The University of Sydney, New South Wales 2006 (Australia)

2015-09-25

Highlights: • First report on nano-carbon doped MgB{sub 2} superconductors synthesized by diffusion method. • Microstructure and superconducting properties of the superconductors are discussed. • B{sub 4}C region blocks the Mg from reacting with B in the 10% nano-carbon doped sample. • MgB{sub 2} with 2.5% nano-carbon doped showed the highest J{sub c}, ≈10{sup 4} A/cm{sup 2} for 20 K at 4 T. - Abstract: We investigated the effects of nano-carbon doping as the intrinsic (B-site nano-carbon substitution) and extrinsic (nano-carbon derivatives) pinning by diffusion method. The contraction of the in-plane lattice confirmed the presence of disorder in boron sublattice caused by carbon substitution. The increasing value in full width half maximum (FWHM) in the X-ray diffraction (XRD) patterns with each increment in the doping level reveal smaller grains and imperfect MgB{sub 2} crystalline. The strain increased across the doping level due to the carbon substitution in the MgB{sub 2} matrix. The broadening of the T{sub c} curves from low to high doping showed suppression of the connectivity of the bulk samples with progressive dirtying. At high doping, the presence of B{sub 4}C region blocked the Mg from reacting with crystalline B thus hampering the formation of MgB{sub 2}. Furthermore, the unreacted Mg acted as a current blocking phase in lowering down the grain connectivity hence depressing the J{sub c} of the 10% nano-carbon doped MgB{sub 2} bulk superconductor.

A multi-period optimization model for planning of China's power sector with consideration of carbon dioxide mitigation—The importance of continuous and stable carbon mitigation policy

International Nuclear Information System (INIS)

Zhang, Dongjie; Liu, Pei; Ma, Linwei; LI, Zheng

2013-01-01

A great challenge China's power sector faces is to mitigate its carbon emissions whilst satisfying the ever-increasing power demand. Optimal planning of the power sector with consideration of carbon mitigation for a long-term future remains a complex task, involving many technical alternatives and an infinite number of possible plants installations, retrofitting, and decommissioning over the planning horizon. Previously the authors built a multi-period optimization model for the planning of China's power sector during 2010–2050. Based on that model, this paper executed calculations on the optimal pathways of China's power sector with two typical decision-making modes, which are based on “full-information” and “limited-information” hypothesis, and analyzed the impacts on the optimal planning results by two typical types of carbon tax policies including a “continuous and stable” one and a “loose first and tight later” one. The results showed that making carbon tax policy for long-term future, and improving the continuity and stability in policy execution can effectively help reduce the accumulated total carbon emissions, and also the cost for carbon mitigation of the power sector. The conclusion of this study is of great significance for the policy makers to make carbon mitigation policies in China and other countries as well. - Highlights: • A multi-stage optimization model for planning the power sector is applied as basis. • Difference of ideal and actual decision making processes are proposed and analyzed. • A “continuous and stable” policy and a “loose first and tight later” one are designed. • 4 policy scenarios are studied applying the optimal planning model and compared. • The importance of “continuous and stable” policy for long term is well demonstrated

Optimization and evaluation of chelerythrine nanoparticles composed of magnetic multiwalled carbon nanotubes by response surface methodology

Energy Technology Data Exchange (ETDEWEB)

Huang, Yong [School of Life and Environmental Sciences, Guilin University of Electronic Technology, Guilin, Guangxi 541014 (China); Yuan, Yulin [Department of Clinical Laboratory, the People' s Hospital of Guangxi Zhuang Autonomous Region, Nanning, Guangxi 530021 (China); Zhou, Zhide; Liang, Jintao; Chen, Zhencheng [School of Life and Environmental Sciences, Guilin University of Electronic Technology, Guilin, Guangxi 541014 (China); Li, Guiyin, E-mail: liguiyin01@163.com [School of Life and Environmental Sciences, Guilin University of Electronic Technology, Guilin, Guangxi 541014 (China)

2014-02-15

In this study, a new chelerythrine nanomaterial targeted drug delivery system (Fe{sub 3}O{sub 4}/MWNTs-CHE) was designed with chelerythrine (CHE) as model of antitumor drug and magnetic multiwalled carbon nanotubes (Fe{sub 3}O{sub 4}/MWNTs) nanocomposites as drug carrier. The process and formulation variables of Fe{sub 3}O{sub 4}/MWNTs-CHE were optimized using response surface methodology (RSM) with a three-level, three-factor Box–Behnken design (BBD). Mathematical equations and response surface plots were used to relate the dependent and independent variables. The experimental results were fitted into second-order response surface model. When Fe{sub 3}O{sub 4}/MWNTs:CHE ratio was 20.6:1, CHE concentration was 172.0 μg/mL, temperature was 34.5 °C, the drug loading content and entrapment efficiency were 3.04 ± 0.17% and 63.68 ± 2.36%, respectively. The optimized Fe{sub 3}O{sub 4}/MWNTs-CHE nanoparticles were characterized by scanning electron microscopy (SEM), Zeta potential, in vitro drug release and MTT assays. The in vitro CHE drug release behavior from Fe{sub 3}O{sub 4}/MWNTs-CHE displayed a biphasic drug release pattern and followed Korsmeyer–Peppas model with Fickian diffusion mechanism for drug release. The results from MTT assays suggested that the Fe{sub 3}O{sub 4}/MWNTs-CHE could effectively inhibit the proliferation of human hepatoma cells (HepG2), which displayed time or concentration-dependent manner. All these preliminary studies were expected to provide a theoretical basis and offer new methods for preparation efficient magnetic targeted drug delivery systems.

Simultaneous absorption of NO and SO{sub 2} into Fe-II-EDTA solution coupled with the Fe-II-EDTA regeneration catalyzed by activated carbon

Energy Technology Data Exchange (ETDEWEB)

Zhu, H.S.; Mao, Y.P.; Yang, X.J.; Chen, Y.; Long, X.L.; Yuan, W.K. [East China University of Science & Technology, Shanghai (China)

2010-07-30

The simultaneous removal of NO and SO{sub 2} from flue gases can be realized with Fe(II)-ethylenediamineteraacetate (EDTA) solution. Activated carbon is used to catalyze the reduction of Fe-III-EDTA to Fe-II-EDTA to maintain the capability of removing NO of the Fe-EDTA solution. The reductant is the sulfite/bisulfite ions produced by SO{sub 2} dissolving into the aqueous solution. Experiments have been performed to determine the effects of activated carbon of coconut shell, Fe-II-EDTA concentration, Fe/EDTA molar ratio, SO{sub 2} partial pressure, NO partial pressure and SO{sub 4}{sup 2-} concentration on the combined elimination of NO and SO{sub 2} with Fe-II-EDTA solution coupled with the Fe-II-EDTA regeneration catalyzed by activated carbon. According to the experimental results, activated carbon not only catalyzes the reduction of Fe-III-EDTA by sulfite/bisulfite greatly but also avoids the release of N{sub 2}O. The NO removal efficiency increases with the initial Fe-II-EDTA concentration and SO{sub 2} partial pressure. The ratio of Fe/EDTA and the SO{sub 4}{sup 2-} concentration has little effect on the catalytic reduction of Fe-III-EDTA. The optimal initial NO concentration range is from 600 ppm to 900 ppm. The experimental results manifest that the Fe-II-EDTA solution coupled with catalytic regeneration of Fe-II-EDTA can maintain high nitric oxide removal efficiency for a long period of time.

Brush Polymer of Donor-Accepter Dyads via Adduct Formation between Lewis Base Polymer Donor and All Carbon Lewis Acid Acceptor

Directory of Open Access Journals (Sweden)

Yang Wang

2017-09-01

Full Text Available A synthetic method that taps into the facile Lewis base (LB→Lewis acid (LA adduct forming reaction between the semiconducting polymeric LB and all carbon LA C60 for the construction of covalently linked donor-acceptor dyads and brush polymer of dyads is reported. The polymeric LB is built on poly(3-hexylthiophene (P3HT macromers containing either an alkyl or vinyl imidazolium end group that can be readily converted into the N-heterocyclic carbene (NHC LB site, while the brush polymer architecture is conveniently constructed via radical polymerization of the macromer P3HT with the vinyl imidazolium chain end. Simply mixing of such donor polymeric LB with C60 rapidly creates linked P3HT-C60 dyads and brush polymer of dyads in which C60 is covalently linked to the NHC junction connecting the vinyl polymer main chain and the brush P3HT side chains. Thermal behaviors, electronic absorption and emission properties of the resulting P3HT-C60 dyads and brush polymer of dyads have been investigated. The results show that a change of the topology of the P3HT-C60 dyad from linear to brush architecture enhances the crystallinity and Tm of the P3HT domain and, along with other findings, they indicate that the brush polymer architecture of donor-acceptor domains provides a promising approach to improve performances of polymer-based solar cells.

The Impact of Dwindling Donor Funding on HIV and AIDS Projects in ...

African Journals Online (AJOL)

This study seeks to investigate the impact of dwindling donor funding on HIV and AIDS projects in Sub-Saharan Africa. The study surveyed literature on the effects of diminishing donor funding on people living with HIV and AIDS in Sub-Saharan Africa. Factors associated with reduced donor funding identified in this study ...

Comparison of Semiconducting and Metallic Carbon Nanotubes Incorporating In{sub 2}S{sub 3}/In{sub 2}O{sub 3} Photoelectrochemical Cells

Energy Technology Data Exchange (ETDEWEB)

Kim, Heesoo; Lee, Jongtaek; Park, Taehee; Lee, Junyoung; Yang, Jonghee; Yi, Whikun [Hanyang University, Seoul (Korea, Republic of); Ahn, Sang Jung [Korea Research Institute of Standards and Science, Daejeon (Korea, Republic of)

2016-08-15

We fabricate photoelectrochemical cells (PECs) using In{sub 2}S{sub 3}/In{sub 2}O3{sub d}ouble-layer composite as a working electrode in the presence of single-walled carbon nanotubes (SWCNTs). Simple solution methods, such as spray-coating and chemical bath deposition, were used to assemble each layer in the PECs. We apply pristine SWCNTs, semiconducting SWCNTs (s-SWCNTs), and metallic SWCNTs (m-SWCNTs) to the PECs, and measure their solar performances, incident photon to charge carrier efficiency, and electroimpedance spectra. Field emission is also measured to explain the enhanced electric field of each cell.

Synthesis of vertical MnO{sub 2} wire arrays on hemp-derived carbon for efficient and robust green catalysts

Energy Technology Data Exchange (ETDEWEB)

Yang, MinHo [Department of Materials Science and Engineering and Beckman Institute for Advanced Science and Technology, University of Illinois at Urbana–Champaign, Urbana, IL 61801 (United States); Kim, Dong Seok; Sim, Jae-Wook [Department of Chemical Engineering, Kangwon National University, 346 Joongang-ro, Samcheok, Gangwon-do 25913 (Korea, Republic of); Jeong, Jae-Min; Kim, Do Hyun [Department of Chemical & Biomolecular Engineering, KAIST, 291 Daehak-ro, Yuseong-gu, Daejeon 34141 (Korea, Republic of); Choi, Jae Hyung [Department of Chemical Engineering, Kangwon National University, 346 Joongang-ro, Samcheok, Gangwon-do 25913 (Korea, Republic of); Department of Chemical Engineering, Pukyong National University, 365 Sinseon-ro, Nam-gu, Busan 48513 (Korea, Republic of); Kim, Jinsoo [Department of Chemical Engineering, Kyung Hee University, 1732, Daogyong-daero, Giheung-gu, Yongin, Gyeonggi-do 17104 (Korea, Republic of); Kim, Seung-Soo, E-mail: sskim2008@kangwon.ac.kr [Department of Chemical Engineering, Kangwon National University, 346 Joongang-ro, Samcheok, Gangwon-do 25913 (Korea, Republic of); Choi, Bong Gill, E-mail: bgchoi@kangwon.ac.kr [Department of Chemical Engineering, Kangwon National University, 346 Joongang-ro, Samcheok, Gangwon-do 25913 (Korea, Republic of)

2017-06-15

Highlights: • The three-dimensional nanocomposites based on vertical MnO{sub 2} array on hemp-derived carbon (HDC) were prepared by hydrothermal method. • The 3D v-MnO{sub 2}/HDC nanocomposites showed well-defined porous nature with a high specific surface area of 382.3 m{sup 2} g{sup −1}. • PET glycolysis was performed using the 3D v-MnO{sub 2}/HDC nanocomposites as a catalyst, leading to efficient catalytic performance. - Abstract: Three-dimensional (3D) carbon materials derived from waste biomass have been attracted increasing attention in catalysis and materials science because of their great potential of catalyst supports with respect to multi-functionality, unique structures, high surface area, and low cost. Here, we present a facile and efficient way for preparing 3D heterogeneous catalysts based on vertical MnO{sub 2} wires deposited on hemp-derived 3D porous carbon. The 3D porous carbon materials are fabricated by carbonization and activation processes using hemp (Cannabis Sttiva L.). These 3D porous carbon materials are employed as catalyst supports for direct deposition of vertical MnO{sub 2} wires using a one-step hydrothermal method. The XRD and XPS results reveal the crystalline structure of α-MnO{sub 2} wires. The resultant composites are further employed as a catalyst for glycolysis of poly(ethylene terephthalate) (PET) with high conversion yield of 98%, which is expected to be expressly profitable for plastics recycling industry.

Multiwall carbon nanotubes decorated with FeCr{sub 2}O{sub 4}, a new selective electrochemical sensor for amoxicillin determination

Energy Technology Data Exchange (ETDEWEB)

Ensafi, Ali Asghar, E-mail: Ensafi@cc.iut.ac.ir; Allafchian, Ali Reza; Rezaei, Behzad [Isfahan University of Technology, Department of Chemistry (Iran, Islamic Republic of)

2012-11-15

FeCr{sub 2}O{sub 4} nanoparticles were synthesized and then multiwall carbon nanotubes (MWCNTs) were decorated with FeCr{sub 2}O{sub 4} nanoparticles. The new nanoparticles were characterized with different techniques such as vibrating sample magnetometer, Fourier transform infrared spectroscopy, scanning surface microscopy, transmission electron microscopy (TEM), atomic force microscopy (AFM), and electrochemical impedance spectroscopy. The results of the study confirm that the particles are pure FeCr{sub 2}O{sub 4}-MWCNTs with a cubic structure. No diffraction peaks of other impurities such as FeO or Cr{sub 2}O{sub 3} were observed. The diffractive peaks of FeCr{sub 2}O{sub 4}-MWCNTs are broadened, implying that the crystalline size of FeCr{sub 2}O{sub 4}-MWCNTs particles is quite small. The mean particle size of FeCr{sub 2}O{sub 4}-MWCNTs calculated by Scherrer equation is about 25 nm, whereas the existence of particles with less than 30 nm size at FeCr{sub 2}O{sub 4}-MWCNTs is clearly reflected in 2D and 3D AFM images. The TEM image confirms that the spaghetti-like FeCr{sub 2}O{sub 4}-MWCNTs formed a porous structure. The synthesized FeCr{sub 2}O{sub 4}-MWCNTs nanoparticles could be used as a new electrocatalysis for voltammetric determination of amoxicillin (AMC). Under the optimized conditions at pH 7.5 and in differential pulse voltammetry, the oxidation peak current of AMC at the surface of the mediator has two linear dynamic ranges including 0.1-10.0 and 10.0-70.0 {mu}mol L{sup -1}. The detection limit of 0.05 {mu}mol L{sup -1} was achieved. The influence of potential interfering compounds on the selectivity was studied. Finally, the modified electrode showed good sensitivity, selectivity, and stability for the determination of AMC in real samples.

Controlled synthesis of carbon-supported Pt{sub 3}Sn by impregnation-reduction and performance on the electrooxidation of CO and ethanol

Energy Technology Data Exchange (ETDEWEB)

Garcia-Rodriguez, S.; Pena, M.A.; Fierro, J.L.G.; Rojas, S. [Grupo Energia y Quimica Sostenibles, Instituto de Catalisis y Petroleoquimica, CSIC, C/Marie Curie 2, E-28049 Madrid (Spain)

2010-09-01

The paper discusses experimental features relevant to the synthesis of carbon-supported Pt{sub 3}Sn nanosized particles by impregnation-reduction of the salt precursors in carbon. Colloidal techniques are proposed as the most suitable ones for obtaining carbon-supported nanosized Pt{sub 3}Sn particles. In most cases, the electrocatalysts obtained have a wide range of Pt and Sn phases, including bimetallic ones. The synthesis of similar materials by impregnating readily available precursors such as SnCl{sub 2} and H{sub 2}PtCl{sub 6} yields Pt-enriched catalyst precursors. In order to obtain electrocatalysts with the desired Pt:Sn = 3 atomic stoichiometry, it is necessary to eliminate chloride ions prior to thermal treatments. Microscopy characterization and thermal stability studies of the fresh and treated bimetallic materials reveal that if such ions are present, Sn is eliminated as volatile SnCl{sub x} species at around 120-130 C. Chloride elimination is achieved by ageing the catalyst precursor in water to ensure the complete hydrolysis of the SnCl{sub 2} precursor. This treatment should be performed once SnCl{sub 2} has been deposited on the carbon to avoid the formation of large Sn-oxide aggregates. A further thermal treatment in hydrogen results in the formation of the desired Pt{sub 3}Sn intermetallic phase. The performance of the Pt{sub 3}Sn/C samples in the CO and ethanol electrooxidation reaction has been studied by means of electrochemical techniques. The electrocatalysts prepared by the impregnation-reduction approach match the performance of the state-of-the-art Pt{sub 3}Sn samples prepared by colloidal techniques. (author)

Self-care practices of Malaysian adults with diabetes and sub-optimal glycaemic control.

Science.gov (United States)

Tan, Ming Yeong; Magarey, Judy

2008-08-01

To investigate the self-care practices of Malaysian adults with diabetes and sub-optimal glycaemic control. Using a one-to-one interviewing approach, data were collected from 126 diabetic adults from four settings. A 75-item questionnaire was used to assess diabetes-related knowledge and self-care practices regarding, diet, medication, physical activity and self-monitoring of blood glucose (SMBG). Most subjects had received advice on the importance of self-care in the management of their diabetes and recognised its importance. Sixty-seven subjects (53%) scored below 50% in their diabetes-related knowledge. Subjects who consumed more meals per day (80%), or who did not include their regular sweetened food intakes in their daily meal plan (80%), or who were inactive in daily life (54%), had higher mean fasting blood glucose levels (p=0.04). Subjects with medication non-adherence (46%) also tended to have higher fasting blood glucose levels. Only 15% of the subjects practiced SMBG. Predictors of knowledge deficit and poor self-care were low level of education (p = <0.01), older subjects (p=0.04) and Type 2 diabetes subjects on oral anti-hyperglycaemic medication (p = <0.01). There were diabetes-related knowledge deficits and inadequate self-care practices among the majority of diabetic patients with sub-optimal glycaemic control. This study should contribute to the development of effective education strategies to promote health for adults with sub-optimal diabetes control.

An alginic acid assisted rheological phase synthesis of carbon coated Li{sub 3}V{sub 2}(PO{sub 4}){sub 3} with high-rate performance

Energy Technology Data Exchange (ETDEWEB)

Wu, Yue, E-mail: tju_wuyue@163.com [Department of Applied Chemistry, School of Chemical and Engineering, Tianjin University, Tianjin 300072 (China); Tang, Zhiyuan [Department of Applied Chemistry, School of Chemical and Engineering, Tianjin University, Tianjin 300072 (China); Guo, Xuyun [Department of Chemistry, The Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong Special Administrative Region (Hong Kong); Du, Chenqiang [Department of Applied Chemistry, School of Chemical and Engineering, Tianjin University, Tianjin 300072 (China); Zhang, Xinhe [McNair Technology Co., Ltd., Dongguan, Guangdong 523700 (China)

2014-12-15

Highlights: • Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C sample was prepared by a modified rheological phase reaction method. • Alginic acid was firstly used as a promising carbon source and investigated. • LVP/C exhibits excellent rate and cycling performances in different voltage ranges. • LVP/C delivers the largest discharge capacity of 61.4 mAh g{sup −1} at 90 C rate in 3.0–4.3 V. • LVP/C can cycle 400 times with slight capacity fading at 20 C high rate in 3.0–4.8 V. - Abstract: A nanoscaled Li{sub 3}V{sub 2}(PO{sub 4}){sub 3}/C(LVP/C) composite is successfully synthesized via a modified rheological phase method. Alginic acid is applied as a new carbon source and ethylene glycol is used as the dispersant, and both of which play multifaceted roles during the synthetic route. A series of intensive investigations shows that the LVP/C composite possesses a three-dimensional carbon network and a loose structure, which provide discontinuous electronic and ionic pathways. The electrochemical performance of the LVP/C cathode is revealed to be impressive in terms of capacity, high-rate capability and long-life cycleability. Between 3.0 and 4.3 V, it delivers a discharge capacity of 132.3 mAh g{sup −1} at 0.5 C rate, approaching the theoretical value, and can cycle at a rate as high as 40 C without obvious capacity fading. Most distinctively, when discharged at 90 C ultrahigh rate (charged at 5 C rate), the largest capacity of 61.4 mAh g{sup −1} can still be available, after 600 cycles the capacity retention can still maintain 76%. When operated within 3.0–4.8 V, it cannot only discharge the initial capacity of 184.1 mAh g{sup −1} at 0.1 C, but also exhibit a stable cycling performance at 20 C for 400 cycles. These excellent performances can be fundamentally attributed to the high electronic/ionic conductivities which are related closely to the modified rheological phase preparation route and the promising new carbon source.

Phthalimide containing donor-acceptor polymers for effective dispersion of single-walled carbon nanotubes

Directory of Open Access Journals (Sweden)

Baris Yilmaz

2015-08-01

Full Text Available Single-walled carbon nanotubes have been dispersed by novel phthalimide containing donor-acceptor type copolymers in organic media. Brominated phthalimide comonomer has been copolymerized with several electron rich structures using Suzuki and Stille coupling reactions. Carbon nanotube dispersion capability of the resultant polymers has been assessed by exploiting the non-covalent interaction of nanotube surface with the pi-system of conjugated backbone of polymers. Four polymers have been found to be good candidates for individually dispersing nanotubes in solution. In order to identify the dispersed nanotube species, 2D excitation-emission map and Raman spectroscopy have been performed. Molecular dynamics modelling has been utilized to reveal the binding energies of dispersants with the nanotube surface and the simulation results have been compared with the experimental findings. Both experimental and theoretical results imply the presence of a complex mechanism that governs the extent of dispersion capacity and selectivity of each conjugated polymeric dispersant in solubilizing carbon nanotubes.

MnO{sub 2}-wrapped hollow graphitized carbon nanosphere electrode for supercapacitor

Energy Technology Data Exchange (ETDEWEB)

Lv, Jing; Yang, Xing; Zhou, Haiyan; Kang, Liping; Lei, Zhibin [Key Laboratory of Applied Surface and Colloid Chemistry (Shaanxi Normal University), Ministry of Education, Xi’an 710062 (China); School of Materials Science and Engineering, Shaanxi Normal University, Xi’an 710062 (China); Liu, Zong-Huai, E-mail: zhliu@snnu.edu.cn [Key Laboratory of Applied Surface and Colloid Chemistry (Shaanxi Normal University), Ministry of Education, Xi’an 710062 (China); School of Materials Science and Engineering, Shaanxi Normal University, Xi’an 710062 (China)

2016-01-15

Highlights: • MnO{sub 2}/HGC nanospheres are prepared by a cooperative template wrapping method. • MnO{sub 2}/HGC nanospheres possess large specific surface area. • MnO{sub 2}/HGC nanospheres are benefit for transmission of ions and electrons. • MnO{sub 2}/HGC electrodes exhibit a high specific capacitance. - Abstract: MnO{sub 2}-wrapped hollow graphitized carbon nanospheres (MnO{sub 2}/HGC) electrodes are prepared by a cooperative template wrapping method. hollow Graphitized carbon nanospheres (HGC) are firstly obtained by carbonizing phenolic resin followed by etching the SiO{sub 2} template, then the MnO{sub 2} ultrathin nanoplates are coated on the surfaces of the HGC nanospheres through a redox reaction between KMnO{sub 4} and HGC nanospheres. The as-prepared MnO{sub 2}/HGC hollow nanospheres possess porous structure and large specific surface area (∼230 m{sup 2} g{sup −1}). The specific capacitances of MnO{sub 2}/HGC nanosphere electrodes with different mass ratios of MnO{sub 2} to HGC are about 340–380 F g{sup −1} at a scan rate of 5 mV s{sup −1} in Na{sub 2}SO{sub 4} solution, and shows relative good cycling performance of the initial capacitance after 1000 cycles. The good specific capacitance is ascribed to the novel hollow nanosphere structure, which possesses high surface-to-volume ratio, and makes it easy for the mass diffusion of electrolyte and transmission of ions and electrons and also maintains the mechanical integrality.

http://www.D-MELD.com, the Italian survival calculator to optimize donor to recipient matching and to identify the unsustainable matches in liver transplantation.

Science.gov (United States)

Avolio, Alfonso W; Agnes, Salvatore; Cillo, Umberto; Lirosi, Maria C; Romagnoli, Renato; Baccarani, Umberto; Zamboni, Fausto; Nicolini, Daniele; Donataccio, Matteo; Perrella, Alessandro; Ettorre, Giuseppe M; Romano, Marina; Morelli, Nicola; Vennarecci, Giovanni; de Waure, Chiara; Fagiuoli, Stefano; Burra, Patrizia; Cucchetti, Alessandro

2012-03-01

Optimization of donor-recipient match is one of the exciting challenges in liver transplantation. Using algorithms obtained by the Italian D-MELD study (5256 liver transplants, 21 Centers, 2002-2009 period), a web-based survival calculator was developed. The calculator is available online at the URL http://www.D-MELD.com. The access is free. Registration and authentication are required. The website was developed using PHP scripting language on HTML platform and it is hosted by the web provider Aruba.it. For a given donor (expressed by donor age) and for three potential recipients (expressed by values of bilirubin, creatinine, INR, and by recipient age, HCV, HBV, portal thrombosis, re-transplant status), the website calculates the patient survival at 90days, 1year, 3years, and allows the identification of possible unsustainable matches (i.e. donor-recipient matches with predicted patient survival less than 50% at 5 years). This innovative approach allows the selection of the best recipient for each referred donor, avoiding the allocation of a high-risk graft to a high-risk recipient. The use of the D-MELD.com website can help transplant surgeons, hepatologists, and transplant coordinators in everyday practice of matching donors and recipients, by selecting the more appropriate recipient among various candidates with different prognostic factors. © 2012 The Authors. Transplant International © 2012 European Society for Organ Transplantation.

Synergistic extraction of Th(IV) by 2-hydroxy-1-naphthaldehyde thiosemicarbazone and neutral donors

Energy Technology Data Exchange (ETDEWEB)

Banerjee, S.; Basu, S. [Nuclear and Analytical Chemistry Lab., Dept. of Chemistry, The Univ. of Burdwan, Burdwan (India)

2003-07-01

The extraction behaviour of Th(IV) from aqueous nitric acid medium employing 2-hydroxy-1-naphthaldehyde thiosemicarbazone has been studied in the presence of various donors, like trioctyl phosphine oxide (TOPO), calix[3]OH[3]OMe[6]arene, trioctyl amine (TOA), dimethyl sulphoxide (DMSO) in ethylacetate solvent. The constants (log k{sub ex}) for the binary complex in organic phase [Th(A)(NO{sub 3}){sub 3}], where A is the ligand, was found to be 3.99, which was by far the largest amongst the corresponding values known for the other thiosemicarbazones. The overall equilibrium constants (log K) for the ternary species [Th(A)TOPO(NO{sub 3}){sub 3}], [Th(A)TOA(NO{sub 3}){sub 3}], [Th(A)Calix[3]OH[3]OMe[6]arene(NO{sub 3}){sub 3}], [Th(A)DMSO(NO{sub 3}){sub 3}] were estimated to be 8.287, 8.862, 8.415, 6.921 respectively. The trend in equilibrium constants were in accordance with the substitution of the donor. The extraction of Th{sup 4+} by the ligand-donor combination was maximum at pH = 1 and extraction decreases with increase in pH. It has been found that the extent of extraction of Th{sup 4+} in the organic phase as the binary as well as ternary complex [Th(A)(NO{sub 3}){sub 3}] and [Th(A)(NO{sub 3}){sub 3}S], where S is the donor, increases with increase in the concentration of the ligand. Similar trend is obtained in the extraction by donors in absence of ligand. In case of ternary extraction, using different donors, amines are found to perform best compared to the other donors. The trend is as follows: TOA > calix[3]OH[3]OMe[6]arene > TOPO > DMSO. In addition, the effect of different diluents on extraction was also studied and the observed trend was methyl salicylate > ethyl acetate > methyl isobutyl ketone > ethyl benzoate. (orig.)

CO{sub 2} capture behavior of shell during calcination/carbonation cycles

Energy Technology Data Exchange (ETDEWEB)

Li, Y.J.; Zhao, C.S.; Chen, H.C.; Duan, L.B.; Chen, X.P. [School of Energy and Environment, Southeast University, Nanjing (China)

2009-08-15

The cyclic carbonation performances of shells as CO{sub 2} sorbents were investigated during multiple calcination/carbonation cycles. The carbonation kinetics of the shell and limestone are similar since they both exhibit a fast kinetically controlled reaction regime and a diffusion controlled reaction regime, but their carbonation rates differ between these two regions. Shell achieves the maximum carbonation conversion for carbonation at 680-700 C. The mactra veneriformis shell and mussel shell exhibit higher carbonation conversions than limestone after several cycles at the same reaction conditions. The carbonation conversion of scallop shell is slightly higher than that of limestone after a series of cycles. The calcined shell appears more porous than calcined limestone, and possesses more pores >230 nm, which allow large CO{sub 2} diffusion-carbonation reaction rates and higher conversion due to the increased surface area of the shell. The pores of the shell that are greater than 230 nm do not sinter significantly. The shell has more sodium ions than limestone, which probably leads to an improvement in the cyclic carbonation performance during the multiple calcination/carbonation cycles. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

Comparison of fluctuating potentials and donor-acceptor pair transitions in a Cu-poor Cu{sub 2}ZnSnS{sub 4} based solar cell

Energy Technology Data Exchange (ETDEWEB)

Teixeira, J. P.; Sousa, R. A.; Sousa, M. G.; Cunha, A. F. da; Leitão, J. P., E-mail: joaquim.leitao@ua.pt [Departamento de Física and I3N, Universidade de Aveiro, 3810-193 Aveiro (Portugal); Fernandes, P. A. [Departamento de Física and I3N, Universidade de Aveiro, 3810-193 Aveiro (Portugal); Departamento de Física, Instituto Superior de Engenharia do Porto, Instituto Politécnico do Porto, Rua Dr. António Bernardino de Almeida, 431, 4200-072 Porto (Portugal); Salomé, P. M. P. [INL - International Iberian Nanotechnology Laboratory, Laboratory for Nanostructured Solar Cells (LaNaSC), Av. Mestre José Veiga, 4715-330 Braga (Portugal); González, J. C. [Departamento de Física, Universidade Federal de Minas Gerais, 30123-970 Belo Horizonte, Minas Gerais (Brazil)

2014-10-20

The structure of the electronic energy levels of a single phase Cu{sub 2}ZnSnS{sub 4} film, as confirmed by Raman Scattering and x-ray diffraction, is investigated through a dependence on the excitation power of the photoluminescence (PL). The behavior of the observed asymmetric band, with a peak energy at ∼1.22 eV, is compared with two theoretical models: (i) fluctuating potentials and (ii) donor-acceptor pair transitions. It is shown that the radiative recombination channels in the Cu-poor film are strongly influenced by tail states in the bandgap as a consequence of a heavy doping and compensation levels. The contribution of the PL for the evaluation of secondary phases is also highlighted.

Improved electrochemical performance of porous Fe{sub 3}O{sub 4}/carbon core/shell nanorods as an anode for lithium-ion batteries

Energy Technology Data Exchange (ETDEWEB)

Xiong, Q.Q.; Lu, Y. [State Key Laboratory of Silicon Materials and Department of Materials Science and Engineering, Zhejiang University, Hangzhou 310027 (China); Wang, X.L., E-mail: wangxl@zju.edu.cn [State Key Laboratory of Silicon Materials and Department of Materials Science and Engineering, Zhejiang University, Hangzhou 310027 (China); Gu, C.D.; Qiao, Y.Q. [State Key Laboratory of Silicon Materials and Department of Materials Science and Engineering, Zhejiang University, Hangzhou 310027 (China); Tu, J.P., E-mail: tujp@zju.edu.cn [State Key Laboratory of Silicon Materials and Department of Materials Science and Engineering, Zhejiang University, Hangzhou 310027 (China)

2012-09-25

Highlights: Black-Right-Pointing-Pointer We prepared porous Fe{sub 3}O{sub 4}/C core/shell nanorods by a facile hydrothermal method using porous Fe{sub 2}O{sub 3} nanorods as the precursor. Black-Right-Pointing-Pointer The Fe{sub 3}O{sub 4}/C nanorods are homogenously coated by an amorphous carbon layer. Black-Right-Pointing-Pointer The Fe{sub 3}O{sub 4}/C nanorod electrode shows high capacity and good cycle stability, as well as enhanced rate performance. - Abstract: Porous Fe{sub 3}O{sub 4}/C core/shell nanorods have been prepared by a facile hydrothermal method using porous Fe{sub 2}O{sub 3} nanorods as the precursor and glucose as the carbon source. The Fe{sub 3}O{sub 4}/C nanorods possess a uniform size with 50-80 nm in diameter and 300-500 nm in length, and are homogenously coated by amorphous carbon layer. The porous nanorods greatly increase the electrical contact, thus facilitating the Li-ion and electron transportation, and enhancing the reactivity of the electrode. Also, the carbon layer can effectively limit the volume expansion and detachment of Fe{sub 3}O{sub 4}, and thus increase its structure stability during cycling. In the context of lithium storage behavior, the Fe{sub 3}O{sub 4}/C nanorod electrode shows high capacity and good cycle stability, as well as enhanced rate performance. After 50 cycles, the reversible capacity of the porous Fe{sub 3}O{sub 4}/C nanorods is 762.1 mAh g{sup -1} at 0.1 C and 597.2 mAh g{sup -1} at 0.5 C, much higher than that of {alpha}-Fe{sub 2}O{sub 3} nanorods (276.4 mAh g{sup -1}) and Fe{sub 3}O{sub 4} nanoparticles (307.9 mAh g{sup -1}). At a high rate of 1 C, the specific capacity of Fe{sub 3}O{sub 4}/C nanorods is still as high as 630.1 mAh g{sup -1}.

The optimization, kinetics and mechanism of m-cresol degradation via catalytic wet peroxide oxidation with sludge-derived carbon catalyst

Energy Technology Data Exchange (ETDEWEB)

Wang, Yamin [Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Wei, Huangzhao; Zhao, Ying [Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); Sun, Wenjing [Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Sun, Chenglin, E-mail: clsun@dicp.ac.cn [Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023 (China)

2017-03-15

Highlights: • The sludge derived carbon modified with 0 °C acid was used as catalyst in CWPO. • RSM was used to optimize CWPO reaction conditions of m-cresol for the first time. • The kinetic model was disclosed to be correlated with residue target concentration. • The proposed degradation pathways of m-cresol were well proven by DFT method. - Abstract: The sludge-derived carbon catalyst modified with 0 °C HNO{sub 3} solution was tested in catalytic wet peroxide oxidation of m-cresol (100 mg L{sup −1}) with systematical mathematical models and theoretical calculation for the first time. The reaction conditions were optimized by response surface methodology (RSM) as T = 60 °C, initial pH = 3.0, C{sub 0,H2O2(30%)} = 1.20 g L{sup −1} (lower than the stoichiometric amount of 1.80 g L{sup −1}) and C{sub cat} = 0.80 g L{sup −1}, with 96% of m-cresol and 47% of TOC converted after 16 min and 120 min of reaction, respectively, and ξ (mg TOC/g H{sub 2}O{sub 2} fed) = 83.6 mg/g. The end time of the first kinetic period in m-cresol model was disclosed to be correlated with the fixed residue m-cresol concentration of about 33%. Furthermore, the kinetic constants in models of TOC and H{sub 2}O{sub 2} exactly provide convincing proof of three-dimensional response surfaces analysis by RSM, which showed the influence of the interaction between organics and H{sub 2}O{sub 2} on effective H{sub 2}O{sub 2} utilization. The reaction intermediates over time were identified by gas chromatography–mass spectrometer based on kinetics analysis. Four degradation pathways for m-cresol were proposed, of which the possibility and feasibility were well proven by frontier molecule orbital theory and atomic charge distribution via density functional theory method.

Effect of the reaction time on the microstructure and porous texture of carbon materials obtained by chlorination of Ti(C{sub 5}H{sub 5})Cl{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Araujo-Pérez, D.J. [Centro de Investigación en Micro y Nanotecnología, Universidad Veracruzana, 94294, Boca del Río, Veracruz (Mexico); González-García, P., E-mail: pedro.gonzalez@cidesi.edu.mx [CONACYT Research Fellow – Centro de Ingeniería y Desarrollo Industrial, 76130, Querétaro, Querétaro (Mexico); Poisot, M. [Instituto de Química Aplicada, Universidad del Papaloapan, 68301, San Juan Bautista Tuxtepec, Oaxaca (Mexico); García-González, L. [Centro de Investigación en Micro y Nanotecnología, Universidad Veracruzana, 94294, Boca del Río, Veracruz (Mexico)

2015-09-15

Carbon materials have been obtained by the chlorination reaction of Ti(C{sub 5}H{sub 5})Cl{sub 2} at 900 °C, varying the reaction time at 30, 60, 90 and 120 min. The average microstructure, studied by X ray powder diffraction, suggest that these materials consist mainly of disordered carbon with low graphitization degree (from 13.5 to 16.5%). These results are in agreement with the Raman data since the D band (at ≈ 1350 cm{sup −1}) indicates that disordered carbon networks have appeared. The calculated in-plane correlation length increases from 4.04 to 4.70 nm as the chlorination time increases from 30 to 120 min. The textural analyses reveal adsorption isotherms type 1 with hysteresis H4, microporous areas as high as 855 m{sup 2}/g and pore volume of 0.55 cm{sup 3}/g. Additionally, an important contribution of mesoporosity, around 3.6 nm, was also detected. - Highlights: • Micro-mesoporous carbon materials were obtained by chlorination of Ti(C{sub 5}H{sub 5}){sub 2}Cl{sub 2} at 900 °C. • The effect of chlorination exposure time on the microstructure and textural properties was studied. • Microstructural analysis by XRD and Raman showed that carbon samples are mainly disordered. • N{sub 2} adsorption/desorption isotherms showed isotherms type 1 with hysteresis H4. • Micropore size increases at longer chlorination time; in contrast, pore volume decreases.

Effects of porous carbon additives on the CO{sub 2} absorption performance of lithium orthosilicate

Energy Technology Data Exchange (ETDEWEB)

Jeoung, Sungeun; Lee, Jae Hwa [Department of Chemistry, School of Natural Science, Ulsan National Institute of Science and Technology (UNIST), UNIST-gil 50, Ulsan 44919 (Korea, Republic of); Kim, Ho Young [Department of Chemical Engineering, School of Energy and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), UNIST-gil 50, Ulsan 44919 (Korea, Republic of); Moon, Hoi Ri, E-mail: hoirimoon@unist.ac.kr [Department of Chemistry, School of Natural Science, Ulsan National Institute of Science and Technology (UNIST), UNIST-gil 50, Ulsan 44919 (Korea, Republic of)

2016-08-10

Highlights: • Composites of Li{sub 4}SiO{sub 4} and porous carbon materials were prepared for CO{sub 2} absorbents. • The kinetic parameters of the composites were examined. • The pores of CMK-3 in Li{sub 4}SiO{sub 4} aid the diffusion of CO{sub 2}. - Abstract: Lithium orthosilicate (Li{sub 4}SiO{sub 4}) is an attractive high-temperature CO{sub 2} sorbent (>650 °C) because of its large theoretical absorption capacity of up to 36.7 wt%. However, slow kinetics and partial reactions with CO{sub 2} hinder its proper operation as a sorbent under practical conditions. To allow the use of this sorbent at lower operation temperatures, the present studies explored the way to improve the CO{sub 2} absorption kinetics and increase the degree of reaction of Li{sub 4}SiO{sub 4}. Porous carbon materials such as CMK-3 were introduced into the sorbent to provide an internal gas pathway. Upon calcination conditions, the carbon amount was controlled in the composites (Li{sub 4}SiO{sub 4}@CMK-X%, where X represents the amounts of CMK-3). In Li{sub 4}SiO{sub 4}@CMK-1.8%, CMK-3 is distributed over the whole solid; in contrast, the additive in Li{sub 4}SiO{sub 4}@CMK-0.5% is mainly observed near the surface of the solid. CO{sub 2} gas sorption study of the composites showed that pores of CMK-3 in Li{sub 4}SiO{sub 4} aid the diffusion of CO{sub 2}. In addition, we found that the incorporation of porous carbon provides more active sites for interactions with CO{sub 2} through the formation of cavities between Li{sub 4}SiO{sub 4} and CMK-3. Li{sub 4}SiO{sub 4}@CMK-1.8% had an increased CO{sub 2} absorption capacity (35.4 wt%) and rate (15.2 wt% for the first 5 min) at 600 °C, compared to the CO{sub 2} absorption capacity (16.3 wt%) and rate (5.1 wt% for the first 5 min) of pristine Li{sub 4}SiO{sub 4} (p-Li{sub 4}SiO{sub 4}). To confirm the influence of porous carbon on the CO{sub 2} absorption properties, multi-walled carbon nanotube (MWCNT) was also examined as an additive

One-pot solvothermal synthesis of Co{sub 1−x}Mn{sub x}C{sub 2}O{sub 4} and their application as anode materials for lithium-ion batteries

Energy Technology Data Exchange (ETDEWEB)

Ang, Wei An Elijah [School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore); Energy Research Institute @ NTU (ERI-N), Nanyang Technological University, 50 Nanyang Drive, Singapore 637553 (Singapore); Cheah, Yan Ling; Wong, Chui Ling [Energy Research Institute @ NTU (ERI-N), Nanyang Technological University, 50 Nanyang Drive, Singapore 637553 (Singapore); Hng, Huey Hoon [School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore); Madhavi, Srinivasan, E-mail: madhavi@ntu.edu.sg [School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore); Energy Research Institute @ NTU (ERI-N), Nanyang Technological University, 50 Nanyang Drive, Singapore 637553 (Singapore); TUM CREATE Center for Electromobility, 1 CREATE Way, #10-02 CREATE Tower, Singapore 138602 (Singapore)

2015-07-25

Graphical abstract: MnC{sub 2}O{sub 4} exhibited good cycling stability while CoC{sub 2}O{sub 4} showed severe capacity fading phenomenon after 40 cycles. Notably, mixed solid solution having Co{sub 0.52}Mn{sub 0.48}C{sub 2}O{sub 4} composition improved the specific reversible discharge capacity to a stable value of ∼1000 mA h g{sup −1} (1 C-rate). - Highlights: • Mixed metal oxalates are synthesized by solvothermal method for the first time. • We control morphologies by varying solvent mixtures and transition metal types. • Li/Co{sub 0.52}Mn{sub 0.48}C{sub 2}O{sub 4} is the best capacity and rate-performing cell in this study. • The positive synergistic effect is attributed to optimal Co:Mn mole ratio. • Properties of Co give high capacity values while Mn give good cycling stability. - Abstract: A facile one-pot solvothermal route has been developed to synthesize phase pure M{sub x}C{sub 2}O{sub 4}⋅2H{sub 2}O (M = Mn, Co; 0 < x ⩽ 1) microstructures without employing any hard/soft template and their electrochemical performance in lithium-ion batteries has been systematically investigated. Morphology, microstructure and composition of the synthesized materials are characterized by field emission-scanning electron microscopy, X-ray diffraction and energy-dispersive X-ray spectroscopy. Anhydrous micron-sized MnC{sub 2}O{sub 4} and CoC{sub 2}O{sub 4} exhibits specific reversible discharge capacity of ∼800 and 950 mA h g{sup −1} respectively, at 1 C-rate. MnC{sub 2}O{sub 4} exhibited good cycling stability while CoC{sub 2}O{sub 4} showed severe capacity fading phenomenon after 40 cycles, thereafter attaining 400–600 mA h g{sup −1} for all C-rates. Interestingly, mixed solid solution having Co{sub 0.52}Mn{sub 0.48}C{sub 2}O{sub 4} composition improved the specific reversible discharge capacity to a stable value of ∼1000 mA h g{sup −1} (1 C-rate), which is one of the highest reported values for such oxalates. The cycling stability of this

Bartonella spp. bacteremia in blood donors from Campinas, Brazil.

Science.gov (United States)

Pitassi, Luiza Helena Urso; de Paiva Diniz, Pedro Paulo Vissotto; Scorpio, Diana Gerardi; Drummond, Marina Rovani; Lania, Bruno Grosselli; Barjas-Castro, Maria Lourdes; Gilioli, Rovilson; Colombo, Silvia; Sowy, Stanley; Breitschwerdt, Edward B; Nicholson, William L; Velho, Paulo Eduardo Neves Ferreira

2015-01-01

Bartonella species are blood-borne, re-emerging organisms, capable of causing prolonged infection with diverse disease manifestations, from asymptomatic bacteremia to chronic debilitating disease and death. This pathogen can survive for over a month in stored blood. However, its prevalence among blood donors is unknown, and screening of blood supplies for this pathogen is not routinely performed. We investigated Bartonella spp. prevalence in 500 blood donors from Campinas, Brazil, based on a cross-sectional design. Blood samples were inoculated into an enrichment liquid growth medium and sub-inoculated onto blood agar. Liquid culture samples and Gram-negative isolates were tested using a genus specific ITS PCR with amplicons sequenced for species identification. Bartonella henselae and Bartonella quintana antibodies were assayed by indirect immunofluorescence. B. henselae was isolated from six donors (1.2%). Sixteen donors (3.2%) were Bartonella-PCR positive after culture in liquid or on solid media, with 15 donors infected with B. henselae and one donor infected with Bartonella clarridgeiae. Antibodies against B. henselae or B. quintana were found in 16% and 32% of 500 blood donors, respectively. Serology was not associated with infection, with only three of 16 Bartonella-infected subjects seropositive for B. henselae or B. quintana. Bartonella DNA was present in the bloodstream of approximately one out of 30 donors from a major blood bank in South America. Negative serology does not rule out Bartonella spp. infection in healthy subjects. Using a combination of liquid and solid cultures, PCR, and DNA sequencing, this study documents for the first time that Bartonella spp. bacteremia occurs in asymptomatic blood donors. Our findings support further evaluation of Bartonella spp. transmission which can occur through blood transfusions.

SnO{sub 2}, IrO{sub 2}, Ta{sub 2}O{sub 5}, Bi{sub 2}O{sub 3}, and TiO{sub 2} nanoparticle anodes: electrochemical oxidation coupled with the cathodic reduction of water to yield molecular H{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Choi, Jina [KRICT, Korea Research Institute of Chemical Technology (Korea, Republic of); Qu Yan; Hoffmann, Michael R., E-mail: mrh@caltech.edu [California Institute of Technology, Linde-Robinson Laboratories (United States)

2012-08-15

In recent years, the search for environmentally friendly alternative energy sources with reduced carbon footprints has increased. The coupling of photovoltaic power sources with advanced electrolysis systems for hydrogen production via water splitting using organic contaminants as sacrificial electron donors has been considered to a be viable alternative. In this report, we demonstrated the feasibility of a scaled-up rooftop prototype of the proposed hybrid photovoltaic-electrolysis system, which utilizes semiconductor nanoparticles coated on to metal substrates as electrodes for the generation of hydrogen coupled with the oxidation of wastewater. Application of an anodic bias of >2.0 V to bismuth-doped TiO{sub 2} (BiO{sub x}-TiO{sub 2}) on Ti metal anodes with a sequential under-coatings of nanoparticulate SnO{sub 2}, IrO{sub 2}, Ta{sub 2}O{sub 5}, and Bi{sub 2}O{sub 3} results in the electrochemical degradation of a variety of organic chemical contaminants in water (i.e., rhodamine B (Rh.B), methylene blue (MB), salicylic acid, triclosan, and phenol) and actual wastewater from a chemical manufacturing plant, while at the same time, molecular hydrogen is produced at stainless steel (SS) cathodes. The kinetics of the anodic substrates oxidation is investigated as a function of the cell current (I{sub cell}), substrate concentration, and background electrolyte composition (e.g., NaCl, Na{sub 2}SO{sub 4}, or seawater). Average current efficiencies were found to be in the range of 4-22 %, while the cathodic current and energy efficiencies for hydrogen production were found to be in the range of 50-70 % and 20-40 %, respectively.

Novel CO<sub>2sub> Foam Concepts and Injection Schemes for Improving CO<sub>2sub> Sweep Efficiency in Sandstone and Carbonate Hydrocarbon Formations

Energy Technology Data Exchange (ETDEWEB)

Nguyen, Quoc [Univ. of Texas, Austin, TX (United States). Department of Petroleum & Geosystems Engineering; Hirasaki, George [Rice Univ., Houston, TX (United States). Department of Chemical Engineering; Johnston, Keith [Univ. of Texas, Austin, TX (United States). Department of Chemical Engineering

2015-02-05

We explored cationic, nonionic and zwitterionic surfactants to identify candidates that have the potential to satisfy all the key requirements for CO<sub>2sub> foams in EOR. We have examined the formation, texture, rheology and stability of CO<sub>2sub> foams as a function of the surfactant structure and formulation variables including temperature, pressure, water/CO<sub>2 sub>ratio, surfactant concentration, salinity and concentration of oil. Furthermore, the partitioning of surfactants between oil and water as well as CO<sub>2sub> and water was examined in conjunction with adsorption measurements on limestone by the Hirasaki lab to develop strategies to optimize the transport of surfactants in reservoirs.

Core–shell structure carbon coated ferric oxide (Fe{sub 2}O{sub 3}@C) nanoparticles for supercapacitors with superior electrochemical performance

Energy Technology Data Exchange (ETDEWEB)

Ye, Yipeng [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Zhang, Haiyan [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, Guangzhou 510006 (China); Chen, Yiming, E-mail: chenym@gdut.edu.cn [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, Guangzhou 510006 (China); Deng, Peng; Huang, Zhikun [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Liu, Liying; Qian, Yannan; Li, Yunyong [School of Materials and Energy, Guangdong University of Technology, Guangzhou 510006 (China); Guangdong Provincial Key Laboratory of Functional Soft Condensed Matter, Guangzhou 510006 (China); Li, Qingyu [School of Chemistry and Chemistry Engineering, Guangxi Normal University, Guilin 541004 (China)

2015-08-05

Highlights: • Fe{sub 2}O{sub 3}@C was prepared by using arc discharge method followed by heat treatment. • KOH activation made the core–shell structure Fe{sub 2}O{sub 3}@C porous. • The activated-Fe{sub 2}O{sub 3}@C supercapacitor exhibited superior electrochemical performance. - Abstract: Core–shell structure carbon coated ferric oxide nanoparticles (Fe{sub 2}O{sub 3}@C) were fabricated by the oxidation of carbon coated iron nanoparticles (Fe@C) prepared by a direct current carbon arc discharge method. Porous activated-Fe{sub 2}O{sub 3}@C was prepared by KOH activation of Fe{sub 2}O{sub 3}@C at the temperature of 750 °C. X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were employed to characterize the structure and morphology of the Fe{sub 2}O{sub 3}@C and activated-Fe{sub 2}O{sub 3}@C. The specific surface area and pore size distribution of the samples were also tested. The activated-Fe{sub 2}O{sub 3}@C electrodes exhibited good electrochemical performance with a maximum specific capacitance of 612 F g{sup −1} at the charge/discharge current density of 0.5 A g{sup −1} with 5 M NaOH electrolyte. After 10,000 cycling DC tests at the charge/discharge current density of 4 A g{sup −1}, a high level specific capacitance of 518 F g{sup −1} was obtained (90.6% retention of the initial capacity), suggesting excellent long-term cycling stability.

Partitioning CO<sub>2sub> fluxes with isotopologue measurements and modeling to understand mechanisms of forest carbon sequestration

Energy Technology Data Exchange (ETDEWEB)

Davidson, Eric A. [Woods Hole Research Center, Falmouth, MA (United States); Saleska, Scott [Univ. of Arizona, Tucson, AZ (United States); Savage, Kathleen [Woods Hole Research Center, Falmouth, MA (United States); Finzi, Adrien [Boston Univ., MA (United States); Moorcroft, Paul [Harvard Univ., Cambridge, MA (United States); Wehr, Richard [Univ. of Arizona, Tucson, AZ (United States)

2016-02-18

1. Project Summary and Objectives This project combines automated in situ observations of the isotopologues of CO<sub>2sub> with root observations, novel experimental manipulations of belowground processes, and isotope-enabled ecosystem modeling to investigate mechanisms of below- vs. aboveground carbon sequestration at the Harvard Forest Environmental Measurements Site (EMS). The proposed objectives, which have now been largely accomplished, include: A. Partitioning of net ecosystem CO<sub>2sub> exchange (NEE) into photosynthesis and respiration using long-term continuous observations of the isotopic composition of NEE, and analysis of their dynamics ; B. Investigation of the influence of vegetation phenology on the timing and magnitude of carbon allocated belowground using measurements of root growth and indices of belowground autotrophic vs. heterotrophic respiration (via trenched plots and isotope measurements); C. Testing whether plant allocation of carbon belowground stimulates the microbial decomposition of soil organic matter, using in situ rhizosphere simulation experiments wherein realistic quantities of artificial isotopically-labeled exudates are released into the soil; and D. Synthesis and interpretation of the above data using the Ecosystem Demography Model 2 (ED2).

Fe{sub 3}O{sub 4}/carbon nanocomposite: Investigation of capacitive & magnetic properties for supercapacitor applications

Energy Technology Data Exchange (ETDEWEB)

Sinan, Neriman, E-mail: sinanneriman@gmail.com [Department of Advanced Technologies, Materials Science and Engineering Program, Bursa Technical University, Yildirim 16310, Bursa (Turkey); Unur, Ece, E-mail: eceunur@yahoo.com [Department of Energy Systems Engineering, Bursa Technical University, Yildirim 16310, Bursa (Turkey)

2016-11-01

Fe{sub 3}O{sub 4} nanoparticles with ∼10 nm diameters were synthesized by an extremely low-cost, scalable and relatively biocompatible chemical co-precipitation method. Magnetic measurements revealed that Fe{sub 3}O{sub 4} nanoparticles have bifunctional superparamagnetic and ferromagnetic character with saturation magnetization (M{sub s}) values of 64 and 71 emu g{sup −1} at 298 K and 10 K, respectively. Pseudocapacitive Fe{sub 3}O{sub 4} nanoparticles were then integrated into hazelnut shells - an abundant agricultural biomass - by an energy efficient hydrothermal carbonization method. Presence of magnesium oxide (MgO) ceramic template or its precursor in the hydrothermal reactor allowed simultaneous introduction of pores into the composite structure. Hierarchically micro-mesoporous Fe{sub 3}O{sub 4}/C nanocomposite possesses a high specific surface area of 344 m{sup 2} g{sup −1}. Electrochemical properties of Fe{sub 3}O{sub 4}/C nanocomposite were investigated by cyclic voltammetry and galvanostatic charge-discharge measurements in a conventional three-electrode cell. The Fe{sub 3}O{sub 4}/C nanocomposite is able to operate in a large negative potential window in 1 M Na{sub 2}SO{sub 4} aqueous electrolyte (−1.2–0 V vs. Ag/AgCl). Synergistic effect of the Fe{sub 3}O{sub 4} and carbon leads to enhanced specific capacitance, rate capability and cyclability making Fe{sub 3}O{sub 4}/C nanocomposite a very promising negative electrode material for asymmetric supercapacitors. - Highlights: • Fe{sub 3}O{sub 4} (magnetite) particles with ∼10 nm dia. were prepared by a facile chemical co-precipitation. • Fe{sub 3}O{sub 4} nanospheres are superparamagnetic at 298K with high saturation magnetization of 64 emu g{sup −1}. • Porous Fe{sub 3}O{sub 4}/C nanocomposite was also prepared by a green HTC method combined with MgO templating. • Electrochemical properties of Fe{sub 3}O{sub 4}/C were studied in 1 M Na{sub 2}SO{sub 4} (between −1.2 and 0 V vs. Ag

The electronic structure and optical properties of donor-acceptor codoped TiO{sub 2} nanosheets from hybrid functional calculations

Energy Technology Data Exchange (ETDEWEB)

Liu, Yanyu; Zhou, Wei; Wu, Ping, E-mail: pingwu@tju.edu.cn

2017-01-15

Here we explore the effect of charge-compensated donor-acceptor pairs (2Nb + C), (2Ta + C), (Mo + 2N) and (W + 2N) codoping on the electronic and optical properties of TiO{sub 2} nanosheets. The results demonstrate that the (2Nb + C) and (2Ta + C) codoping create the delocalized midgap states in TiO{sub 2} nanosheets. The appearance of impurity states extends the absorption edge of nanosheets to the visible light region. The interaction of the host and the foreign chiefly occurs at the band edges of the N-related systems, which reduces the band-gap by 0.5 eV. Although this large band-gap still renders the visible light inefficient, the enhanced UV light absorption has been observed. Besides, the position of absorption edge is independent on the doping concentration, but the higher codoping concentration yields stronger light absorption. Moreover, the band edge alignment verifies that the C-related systems are desirable visible and UV-light-driven photocatalysts for overall water splitting. - Highlights: • A systematical study has been employed on 2D TiO{sub 2} nanosheets with the donor-acceptor codoping. • The (2Nb/2Ta + C) codoping in TiO{sub 2} nanosheets creates the delocalized midgap states. • The C-related systems are desirable visible and UV-light-driven photocatalysts. • The water splitting power of (Mo/W + 2N) codoped systems is improved with enhanced UV light response. • The high doping concentration means the stronger absorption ability of the solar energy.

Carbon inequality at the sub-national scale: A case study of provincial-level inequality in CO{sub 2} emissions in China 1997-2007

Energy Technology Data Exchange (ETDEWEB)

Clarke-Sather, Afton, E-mail: Afton.Clarke-Sather@colorado.edu [Scientific Information Center for Resources and Environment, Lanzhou Branch of the National Science Library, Chinese Academy of Sciences, 8 Middle Tianshui Road, Lanzhou 730000 (China); Department of Geography, University of Colorado, Boulder, 260 UCB, Boulder, CO 80309 (United States); Qu Jiansheng [Scientific Information Center for Resources and Environment, Lanzhou Branch of the National Science Library, Chinese Academy of Sciences, 8 Middle Tianshui Road, Lanzhou 730000 (China); MOE Key Laboratory of Western China' s Environmental Systems, Research School of Arid Environment and Climate Change, Lanzhou University, Lanzhou (China); Wang Qin [MOE Key Laboratory of Western China' s Environmental Systems, Research School of Arid Environment and Climate Change, Lanzhou University, Lanzhou (China); Zeng Jingjing [Scientific Information Center for Resources and Environment, Lanzhou Branch of the National Science Library, Chinese Academy of Sciences, 8 Middle Tianshui Road, Lanzhou 730000 (China); Li Yan [MOE Key Laboratory of Western China' s Environmental Systems, Research School of Arid Environment and Climate Change, Lanzhou University, Lanzhou (China)

2011-09-15

This study asks whether sub-national inequalities in carbon dioxide (CO{sub 2}) emissions mirror international patterns in carbon inequality using the case study of China. Several studies have examined global-level carbon inequality; however, such approaches have not been used on a sub-national scale. This study examines inter-provincial inequality in CO{sub 2} emissions within China using common measures of inequality (coefficient of variation, Gini Index, Theil Index) to analyze provincial-level data derived from the IPCC reference approach for the years 1997-2007. It decomposes CO{sub 2} emissions inequality into its inter-regional and intra-regional components. Patterns of per capita CO{sub 2} emissions inequality in China appear superficially similar to, though slightly lower than, per capita income inequality. However, decomposing these inequalities reveals different patterns. While inter-provincial income inequality is highly regional in character, inter-provincial CO{sub 2} emissions inequality is primarily intra-regional. While apparently similar, global patterns in CO{sub 2} emissions are not mirrored at the sub-national scale. - Highlights: > Carbon inequality is different in character within China than at global scale. > Interprovincial CO{sub 2} emissions inequality in China is slightly lower than income inequality. > Interprovincial GDP inequality in China is regional in character. > Interprovincial CO{sub 2} emissions inequality in China is not regional in character.

Controllable synthesis of a monophase nickel phosphide/carbon (Ni{sub 5}P{sub 4}/C) composite electrode via wet-chemistry and a solid-state reaction for the anode in lithium secondary batteries

Energy Technology Data Exchange (ETDEWEB)

Lu, Yi; Tu, Jiang-Ping; Xiong, Qin-Qin; Mai, Yong-Jin; Zhang, Jun; Qiao, Yan-Qiang; Wang, Xiu-Li; Gu, Chang-Dong [State Key Laboratory of Silicon Materials and Department of Materials, Science and Engineering, Zhejiang University, Hangzhou, 310027 (China); Xiang, Jia-Yuan [Narada Power Source Co. Ltd., Hangzhou, 311105 (China); Mao, Scott X. [Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, PA 15261 (United States)

2012-09-25

A monophase nickel phosphide/carbon (Ni{sub 5}P{sub 4}/C) composite with a thin carbon shell is controllably synthesized via the two-step strategy of a wet-chemistry reaction and a solid-state reaction. In this fabrication, the further diffusion of phosphorus atoms in the carbon shell during the solid-state reaction can be responsible for a chemical transformation from a binary phase of Ni{sub 5}P{sub 4}-Ni{sub 2}P to monophase Ni{sub 5}P{sub 4}. Galvanostatic charge-discharge measurements indicate that the Ni{sub 5}P{sub 4}/C composite exhibits a superior, high rate capacity and good cycling stability. About 76.6% of the second capacity (644.1 mA h g{sup -1}) can be retained after 50 cycles at a 0.1 C rate. At a high rate of 3 C, the specific capacity of Ni{sub 5}P{sub 4}/C is still as high as 357.1 mA h g{sup -1}. Importantly, the amorphous carbon shell can enhance the conductivity of the composite and suppress the aggregation of the active particles, leading to their structure stability and reversibility during cycling. As is confirmed from X-ray-diffraction analysis, no evident microstructural changes occur upon cycling. These results reveal that highly crystalline Ni{sub 5}P{sub 4}/C is one of the most promising anode materials for lithium-ion batteries. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Boron-doped MnO{sub 2}/carbon fiber composite electrode for supercapacitor

Energy Technology Data Exchange (ETDEWEB)

Chi, Hong Zhong, E-mail: hzchi@hdu.edu.cn [College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310018 (China); Zhu, Hongjie [College of Materials and Environmental Engineering, Hangzhou Dianzi University, Hangzhou 310018 (China); Gao, Linhui [Center of Materials Engineering, Zhejiang Sci-Tech University, Hangzhou 310018 (China)

2015-10-05

Highlights: • Interstitial ion in MnO{sub 2} lattice. • Porous film composed by interlocking worm-like nanostructure. • Boron-doped birnessite-type MnO{sub 2}/carbon fiber composite electrode. • Enhanced capacitive properties through nonmetal element doping. - Abstract: The boron-doped MnO{sub 2}/carbon fiber composite electrode has been prepared via in situ redox reaction between potassium permanganate and carbon fibers in the presence of boric acid. The addition of boron as dopant results in the increase of growth-rate of MnO{sub 2} crystal and the formation of worm-like nanostructure. Based on the analysis of binding energy, element boron incorporates into the MnO{sub 2} lattice through interstitial mode. The doped electrode with porous framework is beneficial to pseudocapacitive reaction and surface charge storage, leading to higher specific capacitance and superior rate capability. After experienced 1000 cycles, the boron-doped MnO{sub 2} still retain a higher specific capacitance by about 80% of its initial value. The fall in capacitance is blamed to be the combination of the formation of soluble Mn{sup 2+} and the absence of active site on the outer surface.

Optimization of Nb{sub 2}O{sub 5}/Ag/Nb{sub 2}O{sub 5} multilayers as transparent composite electrode on flexible substrate with high figure of merit

Energy Technology Data Exchange (ETDEWEB)

Dhar, Aritra [Department of Chemistry and Biochemistry, Arizona State University, Tempe, Arizona 85287 (United States); Alford, T. L. [School for Engineering of Matter, Transport, and Energy, Arizona State University, Tempe, Arizona 85287 (United States)

2012-11-15

Different multilayer structures of Nb{sub 2}O{sub 5}/Ag/Nb{sub 2}O{sub 5} have been deposited onto flexible substrates by sputtering at room temperature to develop an indium free transparent composite electrode. The effect of Ag thickness on the electrical and optical properties of the multilayer stack has been studied in accordance with the Ag morphology. The critical thickness of Ag to form a continuous conducting layer is found to be 9.5 nm. A new conduction mechanism has been proposed to describe the conduction before and after the critical thickness. The effective Hall resistivity of the optimized films is as low as 6.44 Multiplication-Sign 10{sup -5} Ohm-Sign -cm with a carrier concentration and mobility of 7.4 Multiplication-Sign 10{sup 21} cm{sup -3} and 13.1 cm{sup 2} /V-s, respectively, at the critical Ag layer thickness. The multilayer stack has been optimized to obtain a sheet resistance of 7.2 Ohm-Sign /sq and an average optical transmittance of 86% at 550 nm without any substrate heating or post-annealing process. The Haacke figure of merit (FOM) has been calculated for the films, and the multilayer with a 9.5 nm thick Ag layer has the highest FOM at 31.5 Multiplication-Sign 10-3 {Omega}{sup -1}, which is one of the highest FOM values reported for TCE deposited at room temperature on a flexible substrate.

Novel one-component polymeric benzophenone photoinitiator containing poly (ethylene glycol) as hydrogen donor

Energy Technology Data Exchange (ETDEWEB)

Wang, Kemin, E-mail: wangkm61@gmail.com; Lu, Yuhui; Chen, Penghui; Shi, Jingsong; Wang, Hongning; Yu, Qiang, E-mail: yuqiang@cczu.edu.cn

2014-02-14

Benzophenone (BP) is a common initiator which is often used in the UV-curing production and related fields. However, the shortcomings such as toxicity, odor, and migration always limit the development of the traditional BP photoinitiator. Polymeric benzophenone photoinitiator (PEG-BP) was synthesized basing on polyethylene glycol (PEG), succinic anhydride, 4-hydroxybenzophenone and epichlorohydrin. The structure of PEG-BP was characterized by IR and {sup 1}H NMR. The radiation absorption of PEG-BP was detected by UV spectrophotometer with the maximum absorption wavelength at 283 nm in acetonitrile solvent, undergone significant redshift corresponding to small molecule photoinitiator BP, thus enhanced the photosensitive efficiency of UV-curing system in the long wavelength region. Besides, PEG-BP has better water solubility than BP, thus could be used in both oil and aqueous solution. The obvious advantage of this initiator was the elimination of amine based hydrogen donors and to provide alternative hydrogen donors with easily availability and non-toxicity. The effects of molecular weights of PEG-BP, photoinitiator concentration, UV-radiation intensity and different monomers on photopolymerization kinetics were investigated in detail. The synthesized polymeric photoinitiators are attractive to be used as type II photoinitiators. - Highlights: • Novel one-component polymeric benzophenone photoinitiator was synthesized. • This photoinitiator contained poly (ethylene glycol) as hydrogen donor. • This photoinitiator was the elimination of amine based hydrogen donors.

Study on CO{sub 2} absorption enhancement by adding active carbon particles into MEA solution

Energy Technology Data Exchange (ETDEWEB)

Qian, Juan; Sun, Rui; Ma, Lian; Sun, Shaozeng [Harbin Institute of Technology, Harbin (China). School of Energy Science and Engineering

2013-07-01

The chemical absorption of CO{sub 2} is generally recognized as the most efficient post-combustion technology of CO{sub 2} separation at present. A study on CO{sub 2} absorption enhancement by adding small particles of active carbon into MEA solution is investigated within a self-designed glass stirring tank. Experiments of different particle loadings and different particle sizes have been conducted. When active carbon particle concentration is fewer, compared to the absorption rate of CO{sub 2} gas absorbed by MEA aqueous solution, the role of active carbon adsorption CO{sub 2} gas is negligible. The enhancement efficiency of CO{sub 2} absorption could be improved by 10% to the upmost in this liquid-particle system.

Rapid synthesis of graphitic carbon nitride powders by metathesis reaction between CaCN{sub 2} and C{sub 2}Cl{sub 6}

Energy Technology Data Exchange (ETDEWEB)

Pang Linlin [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan, 250061 (China); Carbon Fiber Engineering Research Center of Shandong Province, Shandong University, Jinan 250061 (China); Bi Jianqiang [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan, 250061 (China); Bai Yujun [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan, 250061 (China) and Carbon Fiber Engineering Research Center of Shandong Province, Shandong University, Jinan 250061 (China)], E-mail: byj97@126.com; Qi Yongxin [Carbon Fiber Engineering Research Center of Shandong Province, Shandong University, Jinan 250061 (China); Zhu Huiling [Key Laboratory of Liquid Structure and Heredity of Materials, Ministry of Education, Shandong University, Jinan, 250061 (China); Carbon Fiber Engineering Research Center of Shandong Province, Shandong University, Jinan 250061 (China); Wang Chengguo; Wu Jiwei [Carbon Fiber Engineering Research Center of Shandong Province, Shandong University, Jinan 250061 (China); Lu Chengwei [Department of Equipment, Shandong University of Science and Technology, Jinan 250031 (China)

2008-12-20

Carbon nitride powders were rapidly synthesized at low temperature via the chemical metathesis reaction between CaCN{sub 2} and C{sub 2}Cl{sub 6}. X-ray diffraction results confirm the formation of crystalline graphitic carbon nitride. Besides the dominant morphology of nanoparticles, flakes, nanorods, hollow and solid spheres can be observed by transmission electron microscopy. The absorption peaks of C-N, C=N and s-triazine rings, as well as the absence of C{identical_to}N peak in the infrared spectra, further verify the formation of graphite-like sp{sup 2}-bonded structure with planar networks. Elemental analysis gives an atomic ratio of N/C around 0.3. X-ray photoelectron spectra exhibit the existence of chemical bonding between C and N.

The carbon dioxide capture and geological storage; Le captage et le stockage geologique de CO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-06-15

This road-map proposes by the Group Total aims to inform the public on the carbon dioxide capture and geological storage. One possible means of climate change mitigation consists of storing the CO{sub 2} generated by the greenhouse gases emission in order to stabilize atmospheric concentrations. This sheet presents the CO{sub 2} capture from lage fossil-fueled combustion installations, the three capture techniques and the CO{sub 2} transport options, the geological storage of the CO{sub 2} and Total commitments in the domain. (A.L.B.)

Assessing Support Activities by International Donors for CDM Development in Sub-Saharan Africa with Focus on Selected Least Developed Countries

DEFF Research Database (Denmark)

Arens, Christof; Wang-Helmreich, Hanna; Hodes, Glenn Stuart

into the Global Carbon Market”, commissioned by the German Environment Ministry (BMU), it represents an interim step: it paints the picture of an overall donor activities map of the region, while an in-depth evaluation of the specific situation as regards local capacities and concrete capacity building needs...

Donor-impurity related photoionization cross section in GaAs/Ga{sub 1−x}Al{sub x}As concentric double quantum rings: Effects of geometry and hydrostatic pressure

Energy Technology Data Exchange (ETDEWEB)

Baghramyan, H.M. [Department of Solid State Physics, Yerevan State University, Alex Manoogian 1, 0025 Yerevan (Armenia); Barseghyan, M.G., E-mail: mbarsegh@ysu.am [Department of Solid State Physics, Yerevan State University, Alex Manoogian 1, 0025 Yerevan (Armenia); Kirakosyan, A.A. [Department of Solid State Physics, Yerevan State University, Alex Manoogian 1, 0025 Yerevan (Armenia); Laroze, D. [Instituto de Alta Investigación, Universidad de Tarapacá, Casilla 7D, Arica (Chile); Duque, C.A. [Grupo de Materia Condensada-UdeA, Instituto de Física, Facultad de Ciencias Exactas y Naturales, Universidad de Antioquia UdeA, Calle 70 No. 52-21, Medellín (Colombia)

2014-09-15

The donor-impurity related photoionization cross section in GaAs/Ga{sub 1−x}Al{sub x}As three-dimensional concentric double quantum rings is investigated. The photoionization cross section dependence on the incident photon energy is studied considering the effects of hydrostatic pressure, variations of aluminum concentration, geometries of the structure, and impurity position. The interpretation of the dipole matrix element, which reflects the photoionization probability, is also given. We have found that these parameters can lead to both redshift and blueshift of the photoionization spectrum and also influence the cross section peak value.

Effect of ozone concentration on silicon surface passivation by atomic layer deposited Al{sub 2}O{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Gastrow, Guillaume von, E-mail: guillaume.von.gastrow@aalto.fi [Aalto University, Department of Micro- and Nanosciences, Tietotie 3, 02150 Espoo (Finland); Li, Shuo [Aalto University, Department of Micro- and Nanosciences, Tietotie 3, 02150 Espoo (Finland); Putkonen, Matti [VTT Technical Research Centre of Finland, P.O. Box 1000, FI-02044 VTT, Espoo (Finland); Aalto University School of Chemical Technology, Laboratory of Inorganic Chemistry, FI-00076 Aalto, Espoo (Finland); Laitinen, Mikko; Sajavaara, Timo [University of Jyvaskyla, Department of Physics, FIN-40014 University of Jyvaskyla (Finland); Savin, Hele [Aalto University, Department of Micro- and Nanosciences, Tietotie 3, 02150 Espoo (Finland)

2015-12-01

Highlights: • The ALD Al{sub 2}O{sub 3} passivation quality can be controlled by the ozone concentration. • Ozone concentration affects the Si/Al{sub 2}O{sub 3} interface charge and defect density. • A surface recombination velocity of 7 cm/s is reached combining ozone and water ALD. • Carbon and hydrogen concentrations correlate with the surface passivation quality. - Abstract: We study the impact of ozone-based Al{sub 2}O{sub 3} Atomic Layer Deposition (ALD) on the surface passivation quality of crystalline silicon. We show that the passivation quality strongly depends on the ozone concentration: the higher ozone concentration results in lower interface defect density and thereby improved passivation. In contrast to previous studies, our results reveal that too high interface hydrogen content can be detrimental to the passivation. The interface hydrogen concentration can be optimized by the ozone-based process; however, the use of pure ozone increases the harmful carbon concentration in the film. Here we demonstrate that low carbon and optimal hydrogen concentration can be achieved by a single process combining the water- and ozone-based reactions. This process results in an interface defect density of 2 × 10{sup 11} eV{sup −1} cm{sup −2}, and maximum surface recombination velocities of 7.1 cm/s and 10 cm/s, after annealing and after an additional firing at 800 °C, respectively. In addition, our results suggest that the effective oxide charge density can be optimized in a simple way by varying the ozone concentration and by injecting water to the ozone process.

Enhanced photocatalytic activity over Cd{sub 0.5}Zn{sub 0.5}S with stacking fault structure combined with Cu{sup 2+} modified carbon nanotubes

Energy Technology Data Exchange (ETDEWEB)

Gong, Beini; Lu, Yonghong [School of Environment and Energy, South China University of Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006 (China); The Key Lab of Pollution Control and Ecosystem Restoration in Industry Clusters, Ministry of Education, Guangzhou 510006 (China); Wu, Pingxiao, E-mail: pppxwu@scut.edu.cn [School of Environment and Energy, South China University of Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006 (China); The Key Lab of Pollution Control and Ecosystem Restoration in Industry Clusters, Ministry of Education, Guangzhou 510006 (China); Guangdong Provincial Engineering and Technology Research Centre for Environment Risk Prevention and Emergency Disposal, South China University of Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006 (China); Huang, Zhujian; Zhu, Yajie; Dang, Zhi [School of Environment and Energy, South China University of Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006 (China); The Key Lab of Pollution Control and Ecosystem Restoration in Industry Clusters, Ministry of Education, Guangzhou 510006 (China); Zhu, Nengwu [School of Environment and Energy, South China University of Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006 (China); The Key Lab of Pollution Control and Ecosystem Restoration in Industry Clusters, Ministry of Education, Guangzhou 510006 (China); Guangdong Provincial Engineering and Technology Research Centre for Environment Risk Prevention and Emergency Disposal, South China University of Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006 (China); Lu, Guining; Huang, Junyi [School of Environment and Energy, South China University of Technology, Guangzhou Higher Education Mega Centre, Guangzhou 510006 (China); The Key Lab of Pollution Control and Ecosystem Restoration in Industry Clusters, Ministry of Education, Guangzhou 510006 (China)

2016-03-01

Graphical abstract: - Highlights: • CdZnS with stacking faults was combined with Cu{sup 2+} modified carbon nanotubes. • Stacking faults and carbon nanotubes (Cu) synergized to promote charge separation. • The composite exhibited enhanced photocatalytic performance. - Abstract: For enhanced photocatalytic performance of visible light responsive CdZnS, a series of Cd{sub 0.5}Zn{sub 0.5}S solid solutions were fabricated by different methods. It was found that the semiconductor obtained through the precipitation-hydrothermal method (CZS-PH) exhibited the highest photocatalytic hydrogen production rate of 2154 μmol h{sup −1} g{sup −1}. The enhanced photocatalytic hydrogen production of CZS-PH was probably due to stacking fault formation as well as narrow bandgap, a large surface area and a small crystallite size. Based on this, carbon nanotubes modified with Cu{sup 2+} (CNTs (Cu)) were used as a cocatalyst for CZS-PH. The addition of CNTs (Cu) enhanced notably the absorption of the composites for visible light. The highest photocatalytic hydrogen production rate of the Cd{sub 0.5}Zn{sub 0.5}S-CNTs (Cu) composite was 2995 μmol h{sup −1} g{sup −1} with 1.0 wt.% of CNTs (Cu). The improvement of the photocatalytic activity by loading of CNTs (Cu) was not due to alteration of bandgap energy or surface area, and was probably attributed to suppression of the electron-hole recombination by the CNTs, with Cu{sup 2+} anchored in the interface optimizing the photogenerated electron transfer pathway between the semiconductor and CNTs. We report here the successful combination of homojunction and heterojunction in CdZnS semiconductor, which resulted in promotion of charge separation and enhanced photocatalytic activity.

The affinity of the uranyl ion for nitrogen donor ligands

Energy Technology Data Exchange (ETDEWEB)

Jarvis, N.V. (Atomic Energy Corp. of South Africa Ltd., Pretoria (South Africa). Dept. of Process Technology); De Sousa, A.S.; Hancock, R.D. (Univ. of the Witwatersrand, Johannesburg (South Africa). Centre for Molecular Design)

1992-01-01

Established ligand design principles are used to predict the solution chemistry of UO[sub 2][sup 2+] with nitrogen donor ligands which do not contain carboxylate donors. pK[sub a]'s of the nitrogen donors are lowered by addition of hydroxylalkyl groups causing UO[sub 2][sup 2+] to have a greater affinity for these ligands than for hydroxide. Potentiometric studies using the ligands N,N,N',N',N''-pentakis(2-hydroxypropyl)-1,4,7-triazaheptane; N,N,N',N',N''-pentakis(2-hydroxyethyl)-1,4,7-triazaheptane; N,N,N',N'-tetrakis(2-hydroxypropyl)1,2-diaminoethane, N,N,N',N'-tetrakis(2-hydroxyethyl)-trans-1,2-diaminocyclohexane; 1,4,8,11-tetrakis(2-hydroxyethyl)-1,4,8,11-tetraazacyclotetradecane and N,N-bis(2-hydroxyethyl)glycine with UO[sub 2][sup 2+] showed that UO[sub 2][sup 2+] has a considerable aqueous solution chemistry with these ligands. (orig.).

Developments and innovation in carbon dioxide (CO{sub 2}) capture and storage technology. Volume 2: Carbon dioxide (CO{sub 2}) storage and utilisation

Energy Technology Data Exchange (ETDEWEB)

Mercedes Maroto-Valer, M. (ed.)

2010-07-01

This volume initially reviews geological sequestration of CO{sub 2}, from saline aquifer sequestration to oil and gas reservoir and coal bed storage, including coverage of reservoir sealing, and monitoring and modelling techniques used to verify geological sequestration of CO{sub 2}. Terrestrial and ocean sequestration are also reviewed, along with the environmental impact and performance assessments for these routes. The final section reviews advanced concepts for CO{sub 2} storage and utilization, such as industrial utilization, biofixation, mineral carbonation and photocatalytic reduction.

Crystal growth of new charge-transfer salts based on π-conjugated donor molecules

Energy Technology Data Exchange (ETDEWEB)

Morherr, Antonia, E-mail: morherr@stud.uni-frankfurt.de [Physikalisches Institut, Goethe-Universität Frankfurt am Main, 60438 Frankfurt am Main (Germany); Witt, Sebastian [Physikalisches Institut, Goethe-Universität Frankfurt am Main, 60438 Frankfurt am Main (Germany); Chernenkaya, Alisa [Graduate School Materials Science in Mainz, 55128 Mainz (Germany); Institut für Physik, Johannes Gutenberg-Universität, 55099 Mainz (Germany); Bäcker, Jan-Peter [Physikalisches Institut, Goethe-Universität Frankfurt am Main, 60438 Frankfurt am Main (Germany); Schönhense, Gerd [Institut für Physik, Johannes Gutenberg-Universität, 55099 Mainz (Germany); Bolte, Michael [Institut für anorganische Chemie, Goethe-Universität Frankfurt am Main, 60438 Frankfurt am Main (Germany); Krellner, Cornelius [Physikalisches Institut, Goethe-Universität Frankfurt am Main, 60438 Frankfurt am Main (Germany)

2016-09-01

New charge transfer crystals of π-conjugated, aromatic molecules (phenanthrene and picene) as donors were obtained by physical vapor transport. The melting behavior, optimization of crystal growth and the crystal structure are reported for charge transfer salts with (fluorinated) tetracyanoquinodimethane (TCNQ-F{sub x}, x=0, 2, 4), which was used as acceptor material. The crystal structures were determined by single-crystal X-ray diffraction. Growth conditions for different vapor pressures in closed ampules were applied and the effect of these starting conditions for crystal size and quality is reported. The process of charge transfer was investigated by geometrical analysis of the crystal structure and by infrared spectroscopy on single crystals. With these three different acceptor strengths and the two sets of donor materials, it is possible to investigate the distribution of the charge transfer systematically. This helps to understand the charge transfer process in this class of materials with π-conjugated donor molecules.

Electrochemical properties of SnO{sub 2}/carbon composite materials as anode material for lithium-ion batteries

Energy Technology Data Exchange (ETDEWEB)

Wang Jie [School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Zhao Hailei, E-mail: hlzhao@ustb.edu.cn [School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Beijing Key Lab of New Energy Materials and Technologies, Beijing 100083 (China); Liu Xiaotong; Wang Jing; Wang Chunmei [School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China)

2011-07-15

Highlights: > SnO{sub 2}/carbon powders with a cauliflower-like particle structure were synthesized. > Post-annealing can improve the electrochemical properties of SnO{sub 2}/C composite. > The 500 deg. C-annealed SnO{sub 2}/C shows the best electrochemical performance. > The lithium ion diffusion coefficients of the SnO{sub 2}/C electrodes were calculated. - Abstract: SnO{sub 2}/carbon composite anode materials were synthesized from SnCl{sub 4}.5H{sub 2}O and sucrose via a hydrothermal route and a post heat-treatment. The synthesized spherical SnO{sub 2}/carbon powders show a cauliflower-like micro-sized structure. High annealing temperature results in partial reduction of SnO{sub 2}. Metallic Sn starts to emerge at 500 deg. C. High Sn content in SnO{sub 2}/carbon composite is favorable for the increase of initial coulombic efficiency but not for the cycling stability. The SnO{sub 2}/carbon annealed at 500 deg. C exhibits high specific capacity ({approx}400 mAh g{sup -1}), stable cycling performance and good rate capability. The generation of Li{sub 2}O in the first lithiation process can prevent the aggregation of active Sn, while the carbon component can buffer the big volume change caused by lithiation/delithiation of active Sn. Both of them make contribution to the better cycle stability.

Optimization of the deposition conditions and structural characterization of Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub 7-x} thin superconducting films

Energy Technology Data Exchange (ETDEWEB)

Chrzanowski, J.; Meng-Burany, S.; Xing, W.B. [Simon Fraser Univ., British Columbia (Canada)

1994-12-31

Two series of Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub z} thin films deposited on (001) LaAlO{sub 3} single crystals by excimer laser ablation under two different protocols have been investigated. The research has yielded well defined deposition conditions in terms of oxygen partial pressure p(O{sub 2}) and substrate temperature of the deposition process T{sub h}, for the growth of high quality epitaxial films of YBCO. The films grown under conditions close to optimal for both j{sub c} and T{sub c} exhibited T{sub c}{ge}91 K and j{sub c}{ge}4 x 10{sup 6} A/cm{sup 2}, at 77 K. Close correlations between the structural quality of the film, the growth parameters (p(O{sub 2}), T{sub h}) and j{sub c} and T{sub c} have been found.

Modification of g-C{sub 3}N{sub 4} nanosheets by carbon quantum dots for highly efficient photocatalytic generation of hydrogen

Energy Technology Data Exchange (ETDEWEB)

Li, Kui; Su, Feng-Yun; Zhang, Wei-De, E-mail: zhangwd@scut.edu.cn

2016-07-01

Graphical abstract: Carbon quantum dots-modified graphitic carbon nitride nanosheets (CNNS/CQDs) catalysts with high and stable activity for photocatalytic generation of hydrogen through water splitting were successfully constructed. - Highlights: • Composite photocatalysts based on g-C{sub 3}N{sub 4} nanosheets and CQDs were prepared. • High visible light photocatalytic activity for H{sub 2} evolution. • Effective separation and transfer of charge carriers. - Abstract: Carbon quantum dots (CQDs) were deposited onto graphite-like carbon nitride nanosheets (CNNS) to form CNNS/CQDs composites. The prepared CNNS/CQDs composites exhibit much higher photocatalytic activity under visible light irradiation than pure CNNS do. The CNNS/CQDs-7 sample displays the highest photocatalytic performance, with H{sub 2} production rate of 116.1 μmol h{sup −1}, which is three times of that over pure CNNS (37.8 μmol h{sup −1}). Photoluminescence spectroscopy and photoelectrochemical (PEC) analysis reveal that the CQDs are favorable for trapping electrons and promoting the separation of photogenerated electron-hole pairs in CNNS. A possible photocatalytic mechanism of the enhanced photocatalytic performance for H{sub 2} generation over CNNS/CQDs will be proposed in this paper.

Subtask 2.18 - Advancing CO<sub>2sub> Capture Technology: Partnership for CO<sub>2sub> Capture (PCO<sub>2sub>C) Phase III

Energy Technology Data Exchange (ETDEWEB)

Kay, John; Azenkeng, Alexander; Fiala, Nathan; Jensen, Melanie; Laumb, Jason; Leroux, Kerryanne; McCollor, Donald; Stanislowski, Joshua; Tolbert, Scott; Curran, Tyler

2016-03-31

Industries and utilities continue to investigate ways to decrease their carbon footprint. Carbon capture and storage (CCS) can enable existing power generation facilities to meet the current national CO<sub>2sub> reduction goals. The Partnership for CO2 Capture Phase III focused on several important research areas in an effort to find ways to decrease the cost of capture across both precombustion and postcombustion platforms. Two flue gas pretreatment technologies for postcombustion capture, an SO<sub>2sub> reduction scrubbing technology from Cansolv Technologies Inc. and the Tri-Mer filtration technology that combines particulate, NOx, and SO<sub>2sub> control, were evaluated on the Energy & Environmental Research Center’s (EERC’s) pilot-scale test system. Pretreating the flue gas should enable more efficient, and therefore less expensive, CO<sub>2sub> capture. Both technologies were found to be effective in pretreating flue gas prior to CO<sub>2sub> capture. Two new postcombustion capture solvents were tested, one from the Korea Carbon Capture and Sequestration R&D Center (KCRC) and one from CO<sub>2sub> Solutions Incorporated. Both of these solvents showed the ability to capture CO<sub>2sub> while requiring less regeneration energy, which would reduce the cost of capture. Hydrogen separation membranes from Commonwealth Scientific and Industrial Research Organisation were evaluated through precombustion testing. They are composed of vanadium alloy, which is less expensive than the palladium alloys that are typically used. Their performance was comparable to that of other membranes that have been tested at the EERC. Aspen Plus® software was used to model the KCRC and CO<sub>2sub> Solutions solvents and found that they would result in significantly improved overall plant performance. The modeling effort also showed that the parasitic steam load at partial capture of 45% is less than half that of 90% overall capture, indicating savings that

Response of asymmetric carbon nanotube network devices to sub-terahertz and terahertz radiation

International Nuclear Information System (INIS)

Gayduchenko, I.; Kardakova, A.; Voronov, B.; Finkel, M.; Fedorov, G.; Jiménez, D.; Morozov, S.; Presniakov, M.; Goltsman, G.

2015-01-01

Demand for efficient terahertz radiation detectors resulted in intensive study of the asymmetric carbon nanostructures as a possible solution for that problem. It was maintained that photothermoelectric effect under certain conditions results in strong response of such devices to terahertz radiation even at room temperature. In this work, we investigate different mechanisms underlying the response of asymmetric carbon nanotube (CNT) based devices to sub-terahertz and terahertz radiation. Our structures are formed with CNT networks instead of individual CNTs so that effects probed are more generic and not caused by peculiarities of an individual nanoscale object. We conclude that the DC voltage response observed in our structures is not only thermal in origin. So called diode-type response caused by asymmetry of the device IV characteristic turns out to be dominant at room temperature. Quantitative analysis provides further routes for the optimization of the device configuration, which may result in appearance of novel terahertz radiation detectors

Facile synthesis of ultrafine Co{sub 3}O{sub 4} nanocrystals embedded carbon matrices with specific skeletal structures as efficient non-enzymatic glucose sensors

Energy Technology Data Exchange (ETDEWEB)

Li, Mian; Han, Ce; Zhang, Yufan; Bo, Xiangjie, E-mail: baoxj133@nenu.edu.cn; Guo, Liping, E-mail: guolp078@nenu.edu.cn

2015-02-25

Highlights: • Novel hyperfine Co{sub 3}O{sub 4} nanocrystals decorated porous carbon matrixes. • Facile synthesis without use of any harmful dispersing reagents or surfactants. • High dispersion degree of Co{sub 3}O{sub 4} nanocrystals and excellent e{sup −} transport rates. • A large current sensitivity of 955.9 μA cm{sup −2} mM{sup −1} toward glucose. • Excellent anti-interference and stability for glucose detection. - Abstract: A facile, effective, and environmentally friendly method has been adopted for the first time to prepare tiny Co{sub 3}O{sub 4} nanocrystals embedded carbon matrices without using surfactants, harmful organic reagents or extreme conditions. Structural characterizations reveal that the size-controlled Co{sub 3}O{sub 4} nanocrystals are uniformly dispersed on carbon matrices. Electrochemical measurements reveal that Co{sub 3}O{sub 4}-ordered mesoporous carbon (OMC) can more efficiently catalyze glucose oxidation and acquire better detection parameters compared with those for the Co{sub 3}O{sub 4}-macroporous carbon, Co{sub 3}O{sub 4}-reduced graphene oxide, and free Co{sub 3}O{sub 4} nanoparticles (NPs) (such as: the large sensitivity (2597.5 μA cm{sup −2} mM{sup −1} between 0 and 0.8 mM and 955.9 μA cm{sup −2} mM{sup −1} between 0.9 and 7.0 mM), fast response time, wide linear range, good stability, and surpassingly selective capability to electroactive molecules or Cl{sup −}). Such excellent performances are attributed to the synergistic effect of the following three factors: (1) the high catalytic sites provided by the uniformly dispersed and size-controlled Co{sub 3}O{sub 4} nanocrystals embedded on OMC; (2) the excellent reactant transport efficiency caused by the abundant mesoporous structures of OMC matrix: (3) the improved electron transport in high electron transfer rate (confinement of the Co{sub 3}O{sub 4} NPs in nanoscale spaces ensured intimate contact between Co{sub 3}O{sub 4} nanocrystals and the

Electrochemical performance and structure evolution of core-shell nano-ring α-Fe{sub 2}O{sub 3}@Carbon anodes for lithium-ion batteries

Energy Technology Data Exchange (ETDEWEB)

Sun, Yan-Hui, E-mail: sunyanhui0102@163.com; Liu, Shan; Zhou, Feng-Chen; Nan, Jun-Min

2016-12-30

Core-shell nano-ring α-Fe{sub 2}O{sub 3}@Carbon (CSNR) composites with different carbon content (CSNR-5%C and CSNR-13%C) are synthesized using a hydrothermal method by controlling different amounts of glucose and α-Fe{sub 2}O{sub 3} nano-rings with further annealing. The CSNR electrodes exhibit much improved specific capacity, cycling stability and rate capability compared with that of bare nano-ring α-Fe{sub 2}O{sub 3} (BNR), which is attributed to the core-shell nano-ring structure of CSNR. The carbon shell in the inner and outer surface of CSNR composite can increase electron conductivity of the electrode and inhibit the volume change of α-Fe{sub 2}O{sub 3} during discharge/charge processes, and the nano-ring structure of CSNR can buffer the volume change too. The CSNR-5%C electrode shows super high initial discharge/charge capacities of 1570/1220 mAh g{sup −1} and retains 920/897 mAh g{sup −1} after 200 cycles at 500 mA g{sup −1} (0.5C). Even at 2000 mA g{sup −1} (2C), the electrode delivers the initial capacities of 1400/900 mAh g{sup −1}, and still maintains 630/610 mAh g{sup −1} after 200 cycles. The core-shell nano-rings opened during cycling and rebuilt a new flower-like structure consisting of α-Fe{sub 2}O{sub 3}@Carbon nano-sheets. The space among the nano-sheet networks can further buffer the volume expansion of α-Fe{sub 2}O{sub 3} and facilitate the transportation of electrons and Li{sup +} ions during the charge/discharge processes, which increases the capacity and rate capability of the electrode. It is the first time that the evolution of core-shell α-Fe{sub 2}O{sub 3}@Carbon changing to flower-like networks during lithiation/de-lithiation has been reported.

Carbon Sequestration and Optimal Climate Policy

International Nuclear Information System (INIS)

Grimaud, Andre; Rouge, Luc

2009-01-01

We present an endogenous growth model in which the use of a non-renewable natural resource generates carbon-dioxide emissions that can be partly sequestered. This approach breaks with the systematic link between resource use and pollution emission. The accumulated stock of remaining emissions has a negative impact on household utility and corporate productivity. While sequestration quickens the optimal extraction rate, it can also generate higher emissions in the short run. It also has an adverse effect on economic growth. We study the impact of a carbon tax: the level of the tax has an effect in our model, its optimal level is positive, and it can be interpreted ex post as a decreasing ad valorem tax on the resource

Preparation of activated carbon from fly ash and its application for CO{sub 2} capture

Energy Technology Data Exchange (ETDEWEB)

Alhamed, Yahia Abobakor; Rather, Sami Ullah; El-Shazly, Ahmad Hasan; Zaman, Sharif Fakhruz; Daous, Mohammad Abdulrhaman; Al-Zahrani, Abdulrahim Ahmad [King Abdulaziz University, Jeddah (Saudi Arabia)

2015-04-15

Power and desalination plants are one of the main anthropogenic sources for CO{sub 2} generation, which is one of the key elements to cause greenhouse gas effect and thus contribute to the global warming. Fly ash (FA) generated in desalination and power plants was converted into activated carbon (AC) treated with KOH at higher temperature and tested for CO{sub 2} capturing efficiency. Morphological characteristics of FA such as BET specific surface area (SSA), pore volume, pore diameter, and pore size distribution (PSD) were performed using N{sub 2} adsorption isotherm. CO{sub 2} adsorption capacity and adsorption isotherms of CO{sub 2} over AC were measured by performing thermogravimetric analysis at different temperatures. BET SSA of 161m{sup 2}g{sup -1} and adsorption capacity of 26mg CO{sub 2}/g AC can be obtained by activation at KOH/FA ratio of 5 at 700 .deg. C and activation time of 2 h. Therefore, great potential exists for producing AC from FA, which will have the positive effect of reducing the landfill problem and global warming.

An Optimal Centralized Carbon Dioxide Repository for Florida, USA

Directory of Open Access Journals (Sweden)

Brandon Poiencot

2011-03-01

Full Text Available For over a decade, the United States Department of Energy, and engineers, geologists, and scientists from all over the world have investigated the potential for reducing atmospheric carbon emissions through carbon sequestration. Numerous reports exist analyzing the potential for sequestering carbon dioxide at various sites around the globe, but none have identified the potential for a statewide system in Florida, USA. In 2005, 83% of Florida’s electrical energy was produced by natural gas, coal, or oil (e.g., fossil fuels, from power plants spread across the state. In addition, only limited research has been completed on evaluating optimal pipeline transportation networks to centralized carbon dioxide repositories. This paper describes the feasibility and preliminary locations for an optimal centralized Florida-wide carbon sequestration repository. Linear programming optimization modeling is used to plan and route an idealized pipeline network to existing Florida power plants. Further analysis of the subsurface geology in these general locations will provide insight into the suitability of the subsurface conditions and the available capacity for carbon sequestration at selected possible repository sites. The identification of the most favorable site(s is also presented.

Bartonella spp. bacteremia in blood donors from Campinas, Brazil.

Directory of Open Access Journals (Sweden)

Luiza Helena Urso Pitassi

2015-01-01

Full Text Available Bartonella species are blood-borne, re-emerging organisms, capable of causing prolonged infection with diverse disease manifestations, from asymptomatic bacteremia to chronic debilitating disease and death. This pathogen can survive for over a month in stored blood. However, its prevalence among blood donors is unknown, and screening of blood supplies for this pathogen is not routinely performed. We investigated Bartonella spp. prevalence in 500 blood donors from Campinas, Brazil, based on a cross-sectional design. Blood samples were inoculated into an enrichment liquid growth medium and sub-inoculated onto blood agar. Liquid culture samples and Gram-negative isolates were tested using a genus specific ITS PCR with amplicons sequenced for species identification. Bartonella henselae and Bartonella quintana antibodies were assayed by indirect immunofluorescence. B. henselae was isolated from six donors (1.2%. Sixteen donors (3.2% were Bartonella-PCR positive after culture in liquid or on solid media, with 15 donors infected with B. henselae and one donor infected with Bartonella clarridgeiae. Antibodies against B. henselae or B. quintana were found in 16% and 32% of 500 blood donors, respectively. Serology was not associated with infection, with only three of 16 Bartonella-infected subjects seropositive for B. henselae or B. quintana. Bartonella DNA was present in the bloodstream of approximately one out of 30 donors from a major blood bank in South America. Negative serology does not rule out Bartonella spp. infection in healthy subjects. Using a combination of liquid and solid cultures, PCR, and DNA sequencing, this study documents for the first time that Bartonella spp. bacteremia occurs in asymptomatic blood donors. Our findings support further evaluation of Bartonella spp. transmission which can occur through blood transfusions.

Hierarchical three-dimensional porous SnS{sub 2}/carbon cloth anode for high-performance lithium ion batteries

Energy Technology Data Exchange (ETDEWEB)

Chao, Junfeng, E-mail: chchjjff@163.com [College of Electronic Information and Electric Engineering, Anyang Institute of Technology, Anyang 455000 (China); Zhang, Xiutai [College of Electronic Information and Electric Engineering, Anyang Institute of Technology, Anyang 455000 (China); Xing, Shumin [College of Mathematics and Physics, Anyang Institute of Technology, Anyang 455000 (China); Fan, Qiufeng; Yang, Junping; Zhao, Luhua; Li, Xiang [College of Electronic Information and Electric Engineering, Anyang Institute of Technology, Anyang 455000 (China)

2016-08-15

Graphical abstract: Hierarchical 3D porous SnS{sub 2}/carbon cloth, good electrochemical performance. - Highlights: • Hierarchical 3D porous SnS{sub 2}/carbon cloth has been firstly synthesized. • The SnS{sub 2}/carbon clothes were good candidates for excellent lithium ion batteries. • The SnS{sub 2}/carbon cloth exhibits improved capacity compared to pure SnS{sub 2}. - Abstract: Hierarchical three-dimension (3D) porous SnS{sub 2}/carbon clothes were synthesized via a facile polyol refluxing process. The as-synthesized samples were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmet–Teller (BET) and UV–vis diffuse reflectance spectrometer (UV–vis DRS). The 3D porous SnS{sub 2}/carbon clothes-based lithium ion batteries exhibited high reversible capacity and good rate capability as anode materials. The good electrochemical performance for lithium ion storage could be attributed to the special nanostructure, leading to high-rate transportation of electrolyte ion and electrons throughout the electrode matrix.

Lithium cyanide supported by O- and N-donors

Energy Technology Data Exchange (ETDEWEB)

Budanow, Alexandra; Franz, Klaus-Dieter; Vitze, Hannes; Fink, Lothar; Alig, Edith; Bolte, Michael; Wagner, Matthias; Lerner, Hans-Wolfram [Institut fuer Anorganische Chemie, Goethe-Universitaet Frankfurt, Max-von-Laue-Str. 7, 60438, Frankfurt (Germany)

2017-02-15

A series of adducts of LiCN, namely [Li(Me{sub 2}CO{sub 3})CN], [Li(Et{sub 2}CO{sub 3})CN], and [Li(NMP)CN] (NMP = N-methyl-2-pyrrolidone) were prepared by treatment of solvent-free LiCN with the appropriate donor. The starting material for these approaches, donor-free LiCN, was quantitatively prepared from Me{sub 3}SiCN and Li[Me] in diethyl ether at 0 C. Alternatively, [Li(NMP)CN] was synthesized by metathesis reaction of LiCl with NaCN in the presence of stoichiometric amounts of NMP. Although [Li(Me{sub 2}CO{sub 3})CN] and [Li(Et{sub 2}CO{sub 3})CN] are water-sensitive compounds and decompose at the exposure to air, [Li(NMP)CN] is stable in air, even at elevated temperatures. The thermal stability of [Li(NMP)CN] was proven by differential thermal analysis (DTA). [Li(NMP)CN] shows thermal stability up to temperatures of about 132 C. To evaluate the cyanation ability the reactions of 1-bromooctane and 3-bromocyclohexene with unsupported LiCN, [Li(NMP)CN], and a mixture of NaCN/LiCl/NMP were investigated. We found that [Li(NMP)CN] as well as LiCl/NaCN/NMP are efficient cyanation reagents comparable to the expensive and air-sensitive, donor-free LiCN. A product of the chloride-cyanide-bromide exchange could be isolated and structurally characterized by X-ray diffraction. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Study of LiFePO{sub 4} cathode materials coated with high surface area carbon

Energy Technology Data Exchange (ETDEWEB)

Lu, Cheng-Zhang; Fey, George Ting-Kuo [Department of Chemical and Materials Engineering, National Central University, Chung-Li 32054 (China); Kao, Hsien-Ming [Department of Chemistry, National Central University, Chung-Li 32054 (China)

2009-04-01

LiFePO{sub 4} is a potential cathode material for 4 V lithium-ion batteries. Carbon-coated lithium iron phosphates were prepared using a high surface area carbon to react precursors through a solid-state process, during which LiFePO{sub 4} particles were embedded in amorphous carbon. The carbonaceous materials were synthesized by the pyrolysis of peanut shells under argon, where they were carbonized in a two-step process that occurred between 573 and 873 K. The shells were also treated with a proprietary porogenic agent with the goal of altering the pore structure and surface area of the pyrolysis products. The electrochemical properties of the as-prepared LiFePO{sub 4}/C composite cathode materials were systematically characterized by X-ray diffraction, scanning electron microscope, element mapping, energy dispersive spectroscopy, Raman spectroscopy, and total organic carbon (TOC) analysis. In LiFePO{sub 4}/C composites, the carbon not only increases rate capability, but also stabilizes capacity. In fact, the capacity of the composites increased with the specific surface area of carbon. The best result was observed with a composite made of 8.0 wt.% with a specific surface area of 2099 m{sup 2} g{sup -1}. When high surface area carbon was used as a carbon source to produce LiFePO{sub 4}, overall conductivity increased from 10{sup -8} to 10{sup -4} S cm{sup -1}, because the inhibition of particle growth during the final sintering process led to greater specific capacity, improved cycling properties and better rate capability compared to a pure olivine LiFePO{sub 4} material. (author)

Donor-acceptor-donor thienyl/bithienyl-benzothiadiazole/quinoxaline model oligomers: experimental and theoretical studies.

Science.gov (United States)

Pina, João; de Melo, J Seixas; Breusov, D; Scherf, Ullrich

2013-09-28

A comprehensive spectral and photophysical investigation of four donor-acceptor-donor (DAD) oligomers consisting of electron-deficient 2,1,3-benzothiadiazole or quinoxaline moieties linked to electron-rich thienyl or bithienyl units has been undertaken. Additionally, a bis(dithienyl) substituted naphthalene was also investigated. The D-A-D nature of these oligomers resulted in the presence of an intramolecular charge transfer (ICT) state, which was further substantiated by solvatochromism studies (analysis with the Lippert-Mataga formalism). Hereby, significant differences have been obtained for the fluorescence quantum yields of the oligomers in the non-polar solvent methylcyclohexane vs. the polar ethanol. The study was further complemented with the determination of the optimized ground-state molecular geometries for the oligomers together with the prediction of the lowest vertical one-electron excitation energy and the relevant molecular orbital contours using DFT calculations. The electronic transitions show a clear HOMO to LUMO charge-transfer character. In contrast to the thiophene oligomers (the oligothiophenes with n = 1-7), where the intersystem crossing (ISC) yield decreases with n, the studied DAD oligomers were found to show an increase in the ISC efficiency with the number of (donor) thienyl units.

Evidence that cytochrome b{sub 5} acts as a redox donor in CYP17A1 mediated androgen synthesis

Energy Technology Data Exchange (ETDEWEB)

Duggal, Ruchia [Department of Biochemistry, University of Illinois Urbana-Champaign, Urbana, IL (United States); Liu, Yilin [Department of Chemistry, Marquette University, Milwaukee, WI (United States); Gregory, Michael C.; Denisov, Ilia G. [Department of Biochemistry, University of Illinois Urbana-Champaign, Urbana, IL (United States); Kincaid, James R. [Department of Chemistry, Marquette University, Milwaukee, WI (United States); Sligar, Stephen G., E-mail: s-sligar@illinois.edu [Department of Biochemistry, University of Illinois Urbana-Champaign, Urbana, IL (United States); Department of Chemistry, University of Illinois Urbana-Champaign, Urbana, IL (United States)

2016-08-19

Cytochrome P450 17A1 (CYP17A1) is an important drug target for castration resistant prostate cancer. It is a bi-functional enzyme, catalyzing production of glucocorticoid precursors by hydroxylation of pregnene-nucleus, and androgen biosynthesis by a second C−C lyase step, at the expense of glucocorticoid production. Cytochrome b{sub 5} (cyt b{sub 5}) is known to be a key regulator of the androgen synthesis reaction in vivo, by a mechanism that is not well understood. Two hypotheses have been proposed for the mechanism by which cyt b{sub 5} increases androgen biosynthesis. Cyt b{sub 5} could act as an allosteric effector, binding to CYP17A1 and either changing its selective substrate affinity or altering the conformation of the P450 to increase the catalytic rate or decrease unproductive uncoupling channels. Alternatively, cyt b{sub 5} could act as a redox donor for supply of the second electron in the P450 cycle, reducing the oxyferrous complex to form the reactive peroxo-intermediate. To understand the mechanism of lyase enhancement by cyt b{sub 5}, we generated a redox-inactive form of cyt b{sub 5}, in which the heme is replaced with a Manganese-protoporphyrin IX (Mn-b{sub 5}), and investigated enhancement of androgen producing lyase reaction by CYP17A1. Given the critical significance of a stable membrane anchor for all of the proteins involved and the need for controlled stoichiometric ratios, we employed the Nanodisc system for this study. The redox inactive form was observed to have no effect on the lyase reaction, while reactions with the normal heme-iron containing cyt b{sub 5} were enhanced ∼5 fold as compared to reactions in the absence of cyt b{sub 5}. We also performed resonance Raman measurements on ferric CYP17A1 bound to Mn-b{sub 5}. Upon addition of Mn-b{sub 5} to Nanodisc reconstituted CYP17A1, we observed clear evidence for the formation of a b{sub 5}-CYP17A1 complex, as noted by changes in the porphyrin modes and alteration in the proximal

Highly efficient solid-state synthesis of carbon-encapsulated ultrafine MoO{sub 2} nanocrystals as high rate lithium-ion battery anode

Energy Technology Data Exchange (ETDEWEB)

Liu, Boyang, E-mail: byliu@shmtu.edu.cn [Shanghai Maritime University, College of Ocean Science and Engineering (China); Shao, Yingfeng, E-mail: shaoyf@lnm.imech.ac.cn [Chinese Academy of Sciences, State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics (China); Zhang, Yuliang, E-mail: ylzhang@shmtu.edu.cn; Zhang, Fuhua, E-mail: fhzhang@shmtu.edu.cn; Zhong, Ning, E-mail: ningzhong@shmtu.edu.cn [Shanghai Maritime University, College of Ocean Science and Engineering (China); Li, Wenge, E-mail: wgli@shmtu.edu.cn [Shanghai Maritime University, Merchant Marine College (China)

2016-12-15

A simple and highly efficient method is developed for the one-step in situ preparation of carbon-encapsulated MoO{sub 2} nanocrystals (MoO{sub 2}@C) with core-shell structure for high-performance lithium-ion battery anode. The synthesis is depending on the solid-state reaction of cyclopentadienylmolybdenum tricarbonyl dimer with ammonium persulfate in an autoclave at 200 °C for 30 min. The large amount of heat generated during the explosive reaction cleaves the cyclopentadiene ligands into small carbon fragments, which form carbon shell after oxidative dehydrogenation coating on the MoO{sub 2} nanocrystals, resulting in the formation of core-shell structure. The MoO{sub 2} nanocrystals have an equiaxial morphology with an ultrafine diameter of 2–8 nm, and the median size is 4.9 nm. Hundreds of MoO{sub 2} nanocrystals are encapsulated together by the worm-like carbon shell, which is amorphous and about 3–5 nm in thickness. The content of MoO{sub 2} nanocrystals in the nanocomposite is about 69.3 wt.%. The MoO{sub 2}@C anode shows stable cyclability and retains a high reversible capacity of 443 mAh g{sup −1} after 50 cycles at a current density of 3 A g{sup −1}, owing to the effective protection of carbon shell.

Formation of nanotubes in poly (vinylidene fluoride): Application as solid polymer electrolyte in DSC fabricated using carbon counter electrode

Energy Technology Data Exchange (ETDEWEB)

Muthuraaman, B. [Department of Energy, University of Madras, Guindy campus, Chennai 600025 (India); Maruthamuthu, P., E-mail: pmaruthu@yahoo.com [Department of Energy, University of Madras, Guindy campus, Chennai 600025 (India)

2011-09-01

Highlights: > Incorporation of a {pi}-electron donor compound as dopant in poly(vinylidene fluoride) along with redox couple (I{sup -}/I{sub 3}{sup -}) which forms brush like nanotubes. > Investigations about the use of conducting carbon coated FTO as a durable counter electrode and its effects in DSC. > High charge separation and the channelized flow of electrons in the nanotubes in electrolyte favors stable performance. - Abstract: In the present work, we report the incorporation of 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) in poly(vinylidene fluoride) (PVDF) along with the redox couple (I{sup -}/I{sub 3}{sup -}). When ABTS, a {pi}-electron donor, is used to dope PVDF, the polymer composite forms brush-like nanotubes and has been successfully used as a solid polymer electrolyte in dye-sensitized solar cells. Under the given conditions, the electrolyte composition forms nanotubes while it is doped with ABTS, a {pi}-electron donor. With this new electrolyte, a dye-sensitized solar cell was fabricated using N3 dye adsorbed over TiO{sub 2} nanoparticles as the photoanode and conducting carbon cement coated FTO as counter electrode.

Large carbon dioxide fluxes from headwater boreal and sub-boreal streams.

Science.gov (United States)

Venkiteswaran, Jason J; Schiff, Sherry L; Wallin, Marcus B

2014-01-01

Half of the world's forest is in boreal and sub-boreal ecozones, containing large carbon stores and fluxes. Carbon lost from headwater streams in these forests is underestimated. We apply a simple stable carbon isotope idea for quantifying the CO2 loss from these small streams; it is based only on in-stream samples and integrates over a significant distance upstream. We demonstrate that conventional methods of determining CO2 loss from streams necessarily underestimate the CO2 loss with results from two catchments. Dissolved carbon export from headwater catchments is similar to CO2 loss from stream surfaces. Most of the CO2 originating in high CO2 groundwaters has been lost before typical in-stream sampling occurs. In the Harp Lake catchment in Canada, headwater streams account for 10% of catchment net CO2 uptake. In the Krycklan catchment in Sweden, this more than doubles the CO2 loss from the catchment. Thus, even when corrected for aquatic CO2 loss measured by conventional methods, boreal and sub-boreal forest carbon budgets currently overestimate carbon sequestration on the landscape.

Carbonic anhydrase levels and internal lacunar CO/sub 2/ concentrations in aquatic macrophytes

Energy Technology Data Exchange (ETDEWEB)

Weaver, C.I.

1979-01-01

Carbonic anhydrase levels were examined in a variety of aquatic macrophytes from different habitats. In general, carbonic anhydrase levels increased across the habitat gradient such that activities were low in submersed aquatic macrophytes and high in emergent macrophytes with floating-leaved and free-floating plants exhibiting intermediate activities. Internal lacunar CO/sub 2/ concentrations were analyzed in relation to carbonic anhydrase activities. There was no correlation between these two parameters. Internal CO/sub 2/ concentrations ranged from low to high in submersed macrophytes, but were low in floating-leaved and emergent macrophytes. The observed internal CO/sub 2/ concentrations are discussed in relation to the individual morphologies of the plants and the environments in which they occurred.

EUD-based biological optimization for carbon ion therapy

International Nuclear Information System (INIS)

Brüningk, Sarah C.; Kamp, Florian; Wilkens, Jan J.

2015-01-01

Purpose: Treatment planning for carbon ion therapy requires an accurate modeling of the biological response of each tissue to estimate the clinical outcome of a treatment. The relative biological effectiveness (RBE) accounts for this biological response on a cellular level but does not refer to the actual impact on the organ as a whole. For photon therapy, the concept of equivalent uniform dose (EUD) represents a simple model to take the organ response into account, yet so far no formulation of EUD has been reported that is suitable to carbon ion therapy. The authors introduce the concept of an equivalent uniform effect (EUE) that is directly applicable to both ion and photon therapies and exemplarily implemented it as a basis for biological treatment plan optimization for carbon ion therapy. Methods: In addition to a classical EUD concept, which calculates a generalized mean over the RBE-weighted dose distribution, the authors propose the EUE to simplify the optimization process of carbon ion therapy plans. The EUE is defined as the biologically equivalent uniform effect that yields the same probability of injury as the inhomogeneous effect distribution in an organ. Its mathematical formulation is based on the generalized mean effect using an effect-volume parameter to account for different organ architectures and is thus independent of a reference radiation. For both EUD concepts, quadratic and logistic objective functions are implemented into a research treatment planning system. A flexible implementation allows choosing for each structure between biological effect constraints per voxel and EUD constraints per structure. Exemplary treatment plans are calculated for a head-and-neck patient for multiple combinations of objective functions and optimization parameters. Results: Treatment plans optimized using an EUE-based objective function were comparable to those optimized with an RBE-weighted EUD-based approach. In agreement with previous results from photon

From leaf longevity to canopy seasonality: a carbon optimality phenology model for tropical evergreen forests

Science.gov (United States)

Xu, X.; Medvigy, D.; Wu, J.; Wright, S. J.; Kitajima, K.; Pacala, S. W.

2016-12-01

Tropical evergreen forests play a key role in the global carbon, water and energy cycles. Despite apparent evergreenness, this biome shows strong seasonality in leaf litter and photosynthesis. Recent studies have suggested that this seasonality is not directly related to environmental variability but is dominated by seasonal changes of leaf development and senescence. Meanwhile, current terrestrial biosphere models (TBMs) can not capture this pattern because leaf life cycle is highly underrepresented. One challenge to model this leaf life cycle is the remarkable diversity in leaf longevity, ranging from several weeks to multiple years. Ecologists have proposed models where leaf longevity is regarded as a strategy to optimize carbon gain. However previous optimality models can not be readily integrated into TBMs because (i) there are still large biases in predicted leaf longevity and (ii) it is never tested whether the carbon optimality model can capture the observed seasonality in leaf demography and canopy photosynthesis. In this study, we develop a new carbon optimality model for leaf demography. The novelty of our approach is two-fold. First, we incorporate a mechanistic photosynthesis model that can better estimate leaf carbon gain. Second, we consider the interspecific variations in leaf senescence rate, which strongly influence the modelled optimal carbon gain. We test our model with a leaf trait database for Panamanian evergreen forests. Then, we apply the model at seasonal scale and compare simulated seasonality of leaf litter and canopy photosynthesis with in-situ observations from several Amazonian forest sites. We find that (i) compared with original optimality model, the regression slope between observed and predicted leaf longevity increases from 0.15 to 1.04 in our new model and (ii) that our new model can capture the observed seasonal variations of leaf demography and canopy photosynthesis. Our results suggest that the phenology in tropical evergreen

MoS{sub 2}/cotton-derived carbon fibers with enhanced cyclic performance for sodium-ion batteries

Energy Technology Data Exchange (ETDEWEB)

Li, Xiang [School of Materials Science and Engineering, Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, South China University of Technology, Guangzhou, 510641 (China); Yang, Yan [School of Electrical Engineering, Southwest Jiaotong University, Chengdu, 610031 (China); Liu, Jiangwen; Ouyang, Liuzhang; Liu, Jun; Hu, Renzong [School of Materials Science and Engineering, Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, South China University of Technology, Guangzhou, 510641 (China); Yang, Lichun, E-mail: mslcyang@scut.edu.cn [School of Materials Science and Engineering, Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, South China University of Technology, Guangzhou, 510641 (China); Zhu, Min [School of Materials Science and Engineering, Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, South China University of Technology, Guangzhou, 510641 (China)

2017-08-15

Highlights: • MoS{sub 2} nanosheets vertically grow on cotton-derived carbon microfibers. • The carbon fibers facilitate charge transfer and structure stabilization. • The MoS{sub 2}/CDCFs exhibit enhanced cyclic performance for reversible Na{sup +} storage. - Abstract: Carbon fibers derived from bio-template are low cost and environmental benign, therefore have attracted much attention in energy storage materials. In this work, we successfully fabricated MoS{sub 2}/cotton-derived carbon fibers (MoS{sub 2}/CDCFs) via hydrothermal route followed by carbonization process. In the composite of MoS{sub 2}/CDCFs, MoS{sub 2} nanosheets vertically grow on the carbon fibers which offer fast ways for electron transfer and at the same time act as robust support to buffer the volume changes of MoS{sub 2} nanosheets during discharge/charge cycles. As anode materials for sodium-ion batteries, MoS{sub 2}/CDCFs exhibit good rate performance and markedly enhanced cyclic stability due to the conductive support of CDCFs. At a current density of 0.1 A g{sup −1}, the MoS{sub 2}/CDCFs-1 shows an initial reversible capacity of 504.9 mAh g{sup −1}, and maintains 444.5 mAh g{sup −1} after 50 cycles. Even when the current density increases to 0.5 A g{sup −1}, it maintains 323.1 mAh g{sup −1} after 150 cycles, which is much higher than the capacity retention of 149.6 mAh g{sup −1} for the bare MoS{sub 2} nanosheets. The improved electrochemical performance verifies the effective strategy of using cotton as carbon source to construct hierarchical composites for sodium-ion batteries.

Nature of chalcogen hor ellipsis chalcogen contact interactions in organic donor-molecule salts

Energy Technology Data Exchange (ETDEWEB)

Novoa, J.J.; Whangbo, Myung-Hwan (North Carolina State Univ., Raleigh, NC (USA). Dept. of Chemistry); Williams, J.M. (Argonne National Lab., IL (USA))

1990-01-01

The nature of chalcogen{hor ellipsis}chalcogen contact interactions in organic donor-molecule salts was examined by performing ab initio SCF-MO/MP2 calculations on H{sub 2}X{hor ellipsis}XH{sub 2}(X = O, S, SE, Te) and MM2 calculations on donor dimers (TXF){sub 2} (X = S, SE, Te) and (BEDX-TTF){sub 2} (X = O, S). 14 refs., 4 figs., 4 tabs.

Influence of carbon coating on the electrochemical performance of {lambda}-MnO{sub 2} electrode for supercapacitors

Energy Technology Data Exchange (ETDEWEB)

Malak-Polaczyk, A. [Poznan Univ. of Technology (Poland). Inst. of Chemistry and Technical Electrochemistry; CNRS LRC, Mulhouse (France). Inst. de Sciences des Materiaux de Mulhouse; Vix-Guterl, C. [CNRS LRC, Mulhouse (France). Inst. de Sciences des Materiaux de Mulhouse; Frackowiak, E. [Poznan Univ. of Technology (Poland). Inst. of Chemistry and Technical Electrochemistry

2010-07-01

In the present study carbon-coated {lambda}-MnO{sub 2} electrodes were prepared by a simple route. In the first step sugar was pyrolyzed to form a carbon coating on the commercial spinel LiMn{sub 2}O{sub 4}. As-prepared materials were acid treated which resulted in the formation of {lambda}-MnO{sub 2} coated with carbon. Physical properties, morphology and specific surface area of electrode materials were studied by scanning and transmission electron microscopy (SEM, TEM) and X-ray diffraction and nitrogen sorption measurements. Voltammetry cycling, galvanostatic charge/discharge and impedance spectroscopy measurements performed in two and three electrode cells have been applied in order to measure electrochemical parameters. Neutral Li{sub 2}SO{sub 4} aqueous solution has been selected for electrolytic medium. SEM images confirmed well dispersed carbon particles on the surface of LiMn{sub 2}O{sub 4} spinel. As a result of charge/discharge measurements, electrode with carbon coating showed smaller decrease of capacity at higher current and kept the value of 100Fg{sup -1} at 1Ag{sup -1}. (orig.)

Allylic chlorination of terpenic olefins using a combination of MoCl{sub 5} and NaOCl

Energy Technology Data Exchange (ETDEWEB)

Boualy, Brahim; Firdoussi, Larbi El; Ali, Mustapha Ait; Karim, Abdellah, E-mail: elfirdoussi@ucam.ac.m [Universite Cadi Ayyad, Marrakech (Morocco). Faculte des Sciences Semlalia. Lab. de Chimie de Coordination

2011-07-01

MoCl{sub 5} is applied as efficient agent in allylic chlorination of terpenic olefins in the presence of NaOCl as chlorine donor. Various terpenes are converted to the corresponding allylic chlorides in moderate to good yield under mild and optimized reaction conditions. Different molybdenum precursors are also studied. Among them, MoO{sub 3} gives good yield, but after a longer reaction time. (author)

Organ allocation in pediatric renal transplants: is there an optimal donor?

Science.gov (United States)

Pitt, Susan C; Vachharajani, Neeta; Doyle, Maria B; Lowell, Jeffrey A; Chapman, William C; Anderson, Christopher D; Shenoy, Surendra; Wellen, Jason R

2013-01-01

The 2005 revised allocation scheme for pediatric renal transplantation made the decision of whether to transplant an available living-donor (LD) kidney or use a deceased-donor (DD) kidney controversial. The aim of this study was to examine kidney allograft utilization, sensitization, and outcomes of pediatric transplant recipients. Between January 2000 and December 2009, 91 consecutive pediatric kidney recipients (transplanted. The LD (n = 38) and DD (n = 53) groups were similar in age, gender, dialysis status at transplant, warm ischemia time, and overall patient survival. LD recipients were more likely to be Caucasian (92 vs. 69%), receive older allografts (39 ± 10 vs. 23 ± 9 yr), and have fewer human leukocyte antigen (HLA) mismatches (3.3 ± 1.6 vs. 4.4 ± 1.5, p transplant was longer for LD recipients (97%, 91%, 87% vs. DD 89%, 79%, 58%, respectively, p transplant, 17 (33%) DD recipients had an available LD (mean age 40 yr). A greater proportion of all patients were moderately (PRA 21-79%) sensitized post-transplant (p organs was likely due to fewer HLA mismatched in this group. Nonetheless, LD organs appear to provide optimal outcomes in pediatric renal transplants when considering the risk of becoming sensitized post-transplant complicating later use of the LD kidney. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Role of heat on the development of electrochemical sensors on bare and modified Co{sub 3}O{sub 4}/CuO composite nanopowder carbon paste electrodes

Energy Technology Data Exchange (ETDEWEB)

Kumar, Mohan; Kumara Swamy, B.E., E-mail: kumaraswamy21@yahoo.com

2016-01-01

The Co{sub 3}O{sub 4}/CuO composite nanopowder (NP) was synthesized by a mechanochemical method and characterized by using powder X-ray diffraction (PXRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS). The synthesized Co{sub 3}O{sub 4}/CuO NP was used as a modified carbon paste electrode (MCPE) and further the bare carbon paste and Co{sub 3}O{sub 4}/CuO NP modified carbon paste was heated at different temperatures (100, 150, 200 and 250 °C) for 10 min. The Co{sub 3}O{sub 4}/CuO NP MCPE was used to study the consequences of scan rate and dopamine concentration. Furthermore the preheated modified electrodes were used to study the electrochemical response to dopamine (DA), ascorbic acid (AA) and uric acid (UA). - Highlights: • Co{sub 3}O{sub 4}/CuO composite nanopowders (NPs) are prepared by the mechanochemical method. • Co{sub 3}O{sub 4}/CuO was used as a modified electrode for detection of DA, AA and UA. • The role of temperature on the sensor development was studied. • The modified carbon paste electrode shows good sensitivity to DA and UA.

Implantation of energetic D{sup +} ions into carbon dioxide ices and implications for our solar system: formation of D{sub 2}O and D{sub 2}CO{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Bennett, Chris J.; Ennis, Courtney P.; Kaiser, Ralf I., E-mail: ralfk@hawaii.edu [Department of Chemistry, University of Hawai' i at Mānoa, Honolulu, HI 96822 (United States)

2014-10-10

Carbon dioxide (CO{sub 2}) ices were irradiated with energetic D{sup +} ions to simulate the exposure of oxygen-bearing solar system ices to energetic protons from the solar wind and magnetospheric sources. The formation of species was observed online and in situ by exploiting FTIR spectroscopy. Molecular products include ozone (O{sub 3}), carbon oxides (CO{sub 3}(C {sub 2v}, D {sub 3h}), CO{sub 4}, CO{sub 5}, CO{sub 6}), D2-water (D{sub 2}O), and D2-carbonic acid (D{sub 2}CO{sub 3}). Species released into the gas phase were sampled via a quadrupole mass spectrometer, and possible minor contributions from D2-formaldehyde (D{sub 2}CO), D4-methanol (CD{sub 3}OD), and D2-formic acid (DCOOD) were additionally identified. The feasibility of several reaction networks was investigated by determining their ability to fit the observed temporal column densities of 10 key species that were quantified during the irradiation period. Directly relevant to the CO{sub 2}-bearing ices of comets, icy satellites in the outer solar system, and the ice caps on Mars, this work illustrates for the first time that D2-water is formed as a product of the exposure of CO{sub 2} ices to D{sup +} ions. These findings provide strong support for water formation from oxygen-bearing materials via non-thermal hydrogen atoms, and predict reaction pathways that are likely to be unfolding on the surfaces of asteroids and the Moon.

Integrated basic treatment of activated carbon for enhanced CO{sub 2} selectivity

Energy Technology Data Exchange (ETDEWEB)

Adelodun, Adedeji Adebukola; Jo, Young-Min, E-mail: ymjo@khu.ac.kr

2013-12-01

We attempted the use of three chemical agents viz nitric acid (HN), calcium nitrate (CaN) and calcium ethanoate (CaEt) to achieve enhanced CO{sub 2} selective adsorption by activated carbon (AC). In dry phase treatment, microporous coconut shell-based carbon (CS) exhibits higher CO{sub 2} capacity than coal-based. However, upon wet-phase pre-treatment, modified CS samples showed lesser CO{sub 2} adsorption efficiency. Surface characterization with X-ray photoelectron spectroscopy confirms the presence of calcium and amine species on the samples with integrated treatment (A-CaN). These samples recorded the highest low-level CO{sub 2} capture despite calcinated CaEt-doped samples (C-CaEt) showing the highest value for pure and high level CO{sub 2} adsorption capacities. The slope and linearity values of isobaric desorption were used to estimate the proportion of CO{sub 2} chemisorbed and heterogeneity of the adsorbents’ surfaces respectively. Consequently, integrated basic impregnation provides the most efficient adsorbents for selective adsorption of both indoor and outdoor CO{sub 2} levels.

Pseudo Jahn–Teller distortion for a tricyclic carbon sulfide (C{sub 6}S{sub 8}) and its suppression in S-oxygenated dithiine (C{sub 4}H{sub 4}(SO{sub 2}){sub 2})

Energy Technology Data Exchange (ETDEWEB)

Pratik, Saied Md.; Chowdhury, Chandra; Bhattacharjee, Rameswar; Jahiruddin, Sk.; Datta, Ayan, E-mail: spad@iacs.res.in

2015-10-16

Highlights: • DFT calculations show that sulfur rich cyclic molecules are generally distorted. • Such distortions are shown to arise from Pseudo Jahn–Teller (PJT) effects. • Low OMO–UMO gaps leads to strong vibronic instability for these systems. • Increasing the OMO–UMO gaps by substituting electronegative groups on the cyclic rings decreases PJT effects. • Suppressed PJT instability lead to planar sulfur rich cyclic molecules. - Abstract: The tricyclic carbon-sulfide, C{sub 6}S{sub 8} molecule containing two S-atoms in the 1,4-position of the central six-membered ring and one disulfide (S−S) and one thione (C=S) bond on the five membered rings on its either side (1) possesses a “butterfly flapping” type distorted ground state in the gas-phase and also in β-phase of the crystal. For the isolated molecule, better consideration of the S…S non-bonding interactions in the dithiine ring in the bent form at the M06-2X/6-31+G(d,p) level leads to a significant barrier for inversion of 2.4 kcal/mol which is 2–3 times more than that previously obtained by Weber and Dolg at the B3LYP/cc-pVTZ level due to underestimation of dispersion interactions at the B3LYP level. The origin of the distortion leading to lowering of symmetry for 1 (C{sub 2h} → C{sub 2}) is traced to vibronic mixing between the ground state (Ag) and the low lying excited states of A{sub u} symmetry through the a{sub u} normal mode, a (1A{sub g} + 1A{sub u} + 2A{sub u} + 3A{sub u}) × a{sub u} pseudo Jahn–Teller effect (PJTE) problem. Based on fitting of the ground state APES to the lowest root of the 4 × 4 secular determinant, we calculate the linear vibronic coupling constants (F{sub 0i}) between the relevant states. Similar in class to 1, the S-oxygenated derivative of dithiine, C{sub 4}H{sub 4}(SO{sub 2}){sub 2} (2) unlike most other dithiines, remains planar. The absence of the butterfly-type puckered structure in 2 is traced to the enhanced gap (Δ{sub 0}) and very small

Sub-optimal birth weight in newborns of a high socioeconomic status population

Directory of Open Access Journals (Sweden)

Conceição Aparecida de Mattos Segre

2008-09-01

Full Text Available Objective: To compare sub-optimal birth weight (2,500 to 2,999 g term newborns to appropriate for gestational age (birth weight ≥ 3,000 g term newborns, regarding maternal data and newborn morbidity and mortality. Methods: Single term newborns, appropriate for gestational age from a high socioeconomic population (n = 1,242 with birth weight ranging from 2,500 to 2,999 g (Group I were compared to 4,907 newborns with birth weight ≥ than 3,000 g (Group II. Maternal and newborn characteristics were compared between the groups. The Mann-Whitney test, χ2 test and multivariate analysis were used. The significance level adopted was p < 0.05. Rresults: The frequency of sub-optimal birth weight newborns in the population studied was 20.2%. There was a significant association between sub-optimal birth weight and maternal weight before pregnancy and body mass index, maternal weight gain, height, smoking habit and hypertension. Newborns’ 1-minute Apgar score, neonatal hypoglycemia, jaundice, transient tachypnea, congenital pneumonia and hospital stay were significantly different between the groups (p < 0.05. A significant relationship could not be established with the 5-minute Apgar score and pulmonary hypertension in both groups. Neonatal mortality did not differ between the groups. Cconclusions: Socioeconomic status was not a risk factor for sub-optimal birth weight in the studied population. Genetic and environmental factors were associated to sub-optimal weight and neonatal diseases. According to these data, this group of newborns should receive special attention from the health team.

Optimization of UO{sub 2} Granule Characteristics for UO{sub 2}-Mo Pellet Fabrication

Energy Technology Data Exchange (ETDEWEB)

Kim, Dongjoo; Rhee, Young Woo; Kim, Jong Hun; Kim, Keon Sik; Oh, Jang Soo; Yang, Jae Ho; Koo, Yanghyun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

The in-reactor performance, integrity, safety and accident tolerance of the nuclear fuel can be significantly affected by the thermal conductivity of the UO{sub 2} fuel pellet. The improvement in the thermal conductivity of the UO{sub 2} fuel pellet can enhance the fuel performance in various ways. Typically, the FGR (Fission Gas Release) can be reduced by the application of a large-grain fuel pellet because the moving path of the fission gas to the grain boundary is much longer. In addition, the mobility of the fission gases is reduced by the lower temperature gradient in the UO{sub 2} fuel pellet. That is to say, the capacity of the fission gas retention of the fuel pellet can increase. In addition, the lower centerline temperature of the fuel pellet affects the accident tolerance for nuclear fuel as well as the enhancement of fuel safety and fuel pellet integrity under normal operation conditions. In addition, the nuclear reactor power can be uprated owing to the higher safety margin. Thus, many researches on enhancing the thermal conductivity of a nuclear fuel pellet for LWRs have been performed in various ways. From the viewpoint of the development of fuel pellet fabrication technology, an enhancement of the thermal conductivity of a pellet can be obtained by the addition of a higher thermal conductive material in the UO{sub 2} pellet. It is known that a UO{sub 2}-metal composite pellet is one of the most effective concepts. However, to maximize the effect of the metallic phase for thermal conductivity enhancement, a continuous channel of the metallic phase in the UO{sub 2} matrix must be formed. Additionally, if the fabrication process of a UO{sub 2}-metal composite pellet is compatible with a conventional sintering process, the developed technology will be favorable. To enhance the thermal conductivity of a UO{sub 2} pellet, there are the various methods for an appropriate arrangement of the high thermal conductive material in a UO{sub 2} matrix. In this

Identification of the optimal donor quality scoring system and measure of early renal function in kidney transplantation.

LENUS (Irish Health Repository)

Moore, Jason

2009-02-27

The early identification of kidney allografts at risk of later dysfunction has implications for clinical practice. Donor quality scoring systems (preoperative) and measures of early allograft function (first week postoperative) have previously shown practical utility. This study aimed to determine the optimal parameter(s) (preoperative and postoperative) with greatest predictive power for the development of subsequent allograft dysfunction.

A simple approach to estimate soil organic carbon and soil co/sub 2/ emission

International Nuclear Information System (INIS)

Abbas, F.

2013-01-01

SOC (Soil Organic Carbon) and soil CO/sub 2/ (Carbon Dioxide) emission are among the indicator of carbon sequestration and hence global climate change. Researchers in developed countries benefit from advance technologies to estimate C (Carbon) sequestration. However, access to the latest technologies has always been challenging in developing countries to conduct such estimates. This paper presents a simple and comprehensive approach for estimating SOC and soil CO/sub 2/ emission from arable- and forest soils. The approach includes various protocols that can be followed in laboratories of the research organizations or academic institutions equipped with basic research instruments and technology. The protocols involve soil sampling, sample analysis for selected properties, and the use of a worldwide tested Rothamsted carbon turnover model. With this approach, it is possible to quantify SOC and soil CO/sub 2/ emission over short- and long-term basis for global climate change assessment studies. (author)

Fluorocarbon based atomic layer etching of Si{sub 3}N{sub 4} and etching selectivity of SiO{sub 2} over Si{sub 3}N{sub 4}

Energy Technology Data Exchange (ETDEWEB)

Li, Chen [Department of Physics, and Institute for Research in Electronics and Applied Physics, University of Maryland, College Park, Maryland 20742 (United States); Metzler, Dominik; Oehrlein, Gottlieb S., E-mail: oehrlein@umd.edu [Department of Materials Science and Engineering, and Institute for Research in Electronics and Applied Physics, University of Maryland, College Park, Maryland 20742 (United States); Lai, Chiukin Steven; Hudson, Eric A. [Lam Research Corporation, 4400 Cushing Parkway, Fremont, California 94538 (United States)

2016-07-15

Angstrom-level plasma etching precision is required for semiconductor manufacturing of sub-10 nm critical dimension features. Atomic layer etching (ALE), achieved by a series of self-limited cycles, can precisely control etching depths by limiting the amount of chemical reactant available at the surface. Recently, SiO{sub 2} ALE has been achieved by deposition of a thin (several Angstroms) reactive fluorocarbon (FC) layer on the material surface using controlled FC precursor flow and subsequent low energy Ar{sup +} ion bombardment in a cyclic fashion. Low energy ion bombardment is used to remove the FC layer along with a limited amount of SiO{sub 2} from the surface. In the present article, the authors describe controlled etching of Si{sub 3}N{sub 4} and SiO{sub 2} layers of one to several Angstroms using this cyclic ALE approach. Si{sub 3}N{sub 4} etching and etching selectivity of SiO{sub 2} over Si{sub 3}N{sub 4} were studied and evaluated with regard to the dependence on maximum ion energy, etching step length (ESL), FC surface coverage, and precursor selection. Surface chemistries of Si{sub 3}N{sub 4} were investigated by x-ray photoelectron spectroscopy (XPS) after vacuum transfer at each stage of the ALE process. Since Si{sub 3}N{sub 4} has a lower physical sputtering energy threshold than SiO{sub 2}, Si{sub 3}N{sub 4} physical sputtering can take place after removal of chemical etchant at the end of each cycle for relatively high ion energies. Si{sub 3}N{sub 4} to SiO{sub 2} ALE etching selectivity was observed for these FC depleted conditions. By optimization of the ALE process parameters, e.g., low ion energies, short ESLs, and/or high FC film deposition per cycle, highly selective SiO{sub 2} to Si{sub 3}N{sub 4} etching can be achieved for FC accumulation conditions, where FC can be selectively accumulated on Si{sub 3}N{sub 4} surfaces. This highly selective etching is explained by a lower carbon consumption of Si{sub 3}N{sub 4} as compared to SiO{sub

The effect of whole genome amplification on samples originating from more than one donor

DEFF Research Database (Denmark)

Thacker, C.R.; Balogh, M.K.; Børsting, Claus

2006-01-01

In this study, the GenomiPhi(TM) DNA Amplification Kit (Amersham Biosciences) was used to investigate the potential of whole genome amplification (WGA) when considering samples originating from more than one donor. DNA was extracted from blood samples, quantified and normalised before being mixed...

Study of corrosion resistance properties of nitrided carbon steel using radiofrequency N{sub 2}/H{sub 2} cold plasma process

Energy Technology Data Exchange (ETDEWEB)

Bouanis, F.Z. [Unite Materiaux et Transformations (UMET), Ingenierie des Systemes Polymeres, CNRS UMR 8207, ENSCL, BP 90108, F-59652 Villeneuve d' Ascq Cedex (France); Jama, C., E-mail: charafeddine.jama@ensc-lille.f [Unite Materiaux et Transformations (UMET), Ingenierie des Systemes Polymeres, CNRS UMR 8207, ENSCL, BP 90108, F-59652 Villeneuve d' Ascq Cedex (France); Traisnel, M. [Unite Materiaux et Transformations (UMET), Ingenierie des Systemes Polymeres, CNRS UMR 8207, ENSCL, BP 90108, F-59652 Villeneuve d' Ascq Cedex (France); Bentiss, F. [Laboratoire de Chimie de Coordination et d' Analytique, Faculte des Sciences, Universite Chouaib Doukkali, B.P. 20, M-24000 El Jadida (Morocco)

2010-10-15

C38 carbon steel have been plasma-nitrided using a radiofrequency cold plasma discharge treatment in order to investigate the influence of gas composition on corrosion behaviour of nitrided substrates. The investigated C38 steel was nitrided by a RF plasma discharge treatment using two different gas mixtures (75% N{sub 2}/25% H{sub 2} and 25% N{sub 2}/75% H{sub 2}) at different times of plasma-treatment on non-heated substrates. Electron Probe Microanalysis (EPMA) showed that the nitrided layer formed using 75% N{sub 2}/25% H{sub 2} gas mixture was thicker compared to those formed in the case of 25% N{sub 2}/75% H{sub 2} or pure N{sub 2}. The modifications of the corrosion resistance characteristics of plasma-nitrided C38 steel in 1 M HCl solution were investigated by weight loss measurements and ac impedance technique. The results obtained from these two evaluation methods were in good agreement. It was shown that the nitriding treatment in both cases (75% N{sub 2}/25% H{sub 2} and 25% N{sub 2}/75% H{sub 2}) improves the corrosion resistance of investigated carbon steel, while the better performance is obtained for the 75% N{sub 2}/25% H{sub 2} gas mixture. X-ray photoelectron spectroscopy (XPS) was carried out before and after immersion in corrosive medium in order to establish the mechanism of corrosion inhibition using N{sub 2}/H{sub 2} cold plasma nitriding process.

Preparation and characterization of pitch-based nanoporous carbons for improving CO{sub 2} capture

Energy Technology Data Exchange (ETDEWEB)

Lee, Seul-Yi; Yoo, Hye-Min [Department of Chemistry, Inha University, 100 Inharo, Nam-gu, Incheon (Korea, Republic of); Park, Sang Wook; Hee Park, Sang; Oh, Young Se [GS Caltex Corporation, Munji-dong, Yuseong-gu, Daejeon (Korea, Republic of); Rhee, Kyong Yop [Industrial Liaison Research Institute, Department of Mechanical Engineering, College of Engineering, Kyung Hee University, Yongin (Korea, Republic of); Park, Soo-Jin, E-mail: sjpark@inha.ac.kr [Department of Chemistry, Inha University, 100 Inharo, Nam-gu, Incheon (Korea, Republic of)

2014-07-01

Pitch is considered a promising low-cost carbon precursor. However, when pitch is pyrolyzed, it forms polycrystalline graphite, which is non-porous, and therefore, not useful for CO{sub 2} adsorption. In this work, pitch was chemically activated to obtain a large specific surface area and micropore volume. Varying weight ratios of KOH (i.e., 0, 1, 2, and 3) were used as the activating agent. The characteristics of the samples were investigated using scanning electron microscopy (SEM), N{sub 2}/77 K adsorption isotherms, and X-ray diffraction (XRD). The CO{sub 2} adsorption performance was studied by isothermal adsorption/desorption measurements. The results showed that an increase in specific surface areas and total pore volumes of pitch-based nanoporous carbons, resulted in an enhancement of CO{sub 2} adsorption capacity. - Graphical abstract: This is the surface morphologies of pitch precursor and pitch-derived activated carbon (AC-2). - Highlights: • Pitch is considered a promising low-cost carbon precursor. • Specific surface area: 1442 m{sup 2}/g and micropore volume: 0.504 cm{sup 3}/g. • CO{sub 2} adsorption capacity showed 203 mg/g (@ RT/1 bar)

Synthesis of N-rich microporous carbon materials from chitosan by alkali activation using Na{sub 2}CO{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Ilnicka, Anna; Lukaszewicz, Jerzy P., E-mail: jerzy_lukaszewicz@o2.pl

2015-11-15

Highlights: • The novel manufacturing procedure of nitrogen-rich carbon materials. • The biopolymer chitosan can be activated by sodium carbonate. • The effect of the addition of activator and the temperature of carbonization was investigated. • The N-rich carbon materials exhibit high specific surface area and microporous structure. - Abstract: The paper presents the first systematic study on the synthesis of nitrogen-rich nanoporous activated carbons by chitosan carbonization in the presence of a hard template (activator), i.e. Na{sub 2}CO{sub 3}. Carbonization process was carried out in the range of 600–900 °C under a flow of nitrogen. The effect of the addition of different volumes of activator and the temperature of carbonization on the development of specific surface area and pore structure (pore volume and median pore diameter) of the activated carbons was investigated. Additionally, the nitrogen content and nitrogen-containing surface species were determined by means of XPS and combustion elemental analysis. The nitrogen content was placed in the range of 2.4–13.1 wt.%. On the grounds of the low-temperature adsorption of nitrogen, it was found that obtained adsorption isotherms were of type-I, based on the IUPAC classification, which is typical for microporous materials.

Nanostructured composite TiO{sub 2}/carbon catalysts of high activity for dehydration of n-butanol

Energy Technology Data Exchange (ETDEWEB)

Cyganiuk, Aleksandra [Faculty of Chemistry, Nicolaus Copernicus University, 87-100 Torun (Poland); Klimkiewicz, Roman [Institute of Low Temperature and Structure Research PAN, 50-422 Wroclaw (Poland); Bumajdad, Ali [Faculty of Science, Kuwait University, PO Box 5969 Safat, Kuwait 13060 (Kuwait); Ilnicka, Anna [Faculty of Chemistry, Nicolaus Copernicus University, 87-100 Torun (Poland); Lukaszewicz, Jerzy P., E-mail: jerzy_lukaszewicz@o2.pl [Faculty of Chemistry, Nicolaus Copernicus University, 87-100 Torun (Poland)

2015-08-15

Highlights: • New biotechnological method for fabrication of composite catalysts. • In situ synthesis of nanosized TiO{sub 2} clusters in the carbon matrix. • High dispersion of TiO{sub 2} in carbon matrix. • High catalytic activity achieved for very low active phase content. • Efficient dehydration of n-butanol to butane-1. - Abstract: A novel method of wood impregnation with titanium ions is presented. Titanium(IV) ions were complexed to peroxo/hydroxo complexes which were obtained by treating a TiCl{sub 4} water solution with H{sub 2}O{sub 2}. The solution of chelated titanium ions was used for the impregnation of living stems of Salix viminalis wood. Saturated stems were carbonized at 600–800 °C, yielding a microporous carbon matrix, in which nanoparticles of TiO{sub 2} were uniformly distributed. A series of composite TiO{sub 2}–carbon catalysts was manufactured and tested in the process of n-butanol conversion to butane-1. The composite catalysts exhibited very high selectivity (ca. 80%) and yield (ca. 30%) despite a low content of titanium (ca. 0.5% atomic). The research proved that the proposed functionalization led to high dispersion of the catalytic phase (TiO{sub 2}), which played a crucial role in the catalyst performance. High dispersion of TiO{sub 2} was achieved due to a natural transport of complexed titanium ions in living plant stems.

Excess of methyl donor in the perinatal period reduces postnatal leptin secretion in rat and interacts with the effect of protein content in diet.

Directory of Open Access Journals (Sweden)

Fanny Giudicelli

Full Text Available Methionine, folic acid, betaine and choline interact in the one-carbon metabolism which provides methyl groups for methylation reactions. An optimal intake of these nutrients during pregnancy is required for successful completion of fetal development and evidence is growing that they could be involved in metabolic long-term programming. However, the biological pathways involved in the action of these nutrients are still poorly known. This study investigated the interaction between methyl donors and protein content in maternal diet during the preconceptual, pregnancy and lactation periods and the consequences on the rat offspring in the short and long term. Methyl donor supplementation reduced leptin secretion in offspring, whereas insulin levels were mostly affected by protein restriction. The joint effect of protein restriction and methyl donor excess strongly impaired postnatal growth in both gender and long term weight gain in male offspring only, without affecting food intake. In addition, rats born from protein restricted and methyl donor supplemented dams gained less weight when fed a hypercaloric diet. Methylation of the leptin gene promoter in adipose tissue was increased in methyl donor supplemented groups but not affected by protein restriction only. These results suggest that maternal methyl donor supplementation may influence energy homeostasis in a gender-dependent manner, without affecting food intake. Moreover, we showed that macronutrients and micronutrients in maternal diet interact to influence the programming of the offspring.

Separation of CO{sub 2}/N{sub 2} by means of a carbon membrane

Energy Technology Data Exchange (ETDEWEB)

Wall, Y.; Braun, G. [Cologne University of Applied Sciences, Cologne (Germany); Kaltenborn, N.; Voigt, I. [Fraunhofer Institute for Ceramic Technologies and Systems, IKTS, Hermsdorf (Germany); Brunner, G. [Hamburg University of Technology (TUHH), Hamburg (Germany)

2012-03-15

The permeation and separation performance of an ultramicroporous carbon membrane for separation of CO{sub 2}/N{sub 2} mixtures were investigated. The experiments were conducted using the steady-state measurement method with pure gases (dead-end mode) and a CO{sub 2}/N{sub 2} gas mixture (20/80 mol.-%) (cross-flow mode) in the temperature range from 293 K to 363 K and at feed pressures of up to 1.4 MPa and atmospheric pressure on the permeate side. The membrane exhibited a selectivity of about 25 and permeability of about 500 Barrer for CO{sub 2} in the mixture with N{sub 2}. The single-gas measurements do not reflect the membrane performance correctly. An adsorption-selective effect is assumed to be the main separation mechanism. Moreover, membrane-aging effects causing blocking due to pore constrictions through adsorption were observed. These pore constrictions lower the permeability, but they raise the selectivity. Operation at high temperatures leads to a reduction of aging effects. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Improving health profile of blood donors as a consequence of transfusion safety efforts

DEFF Research Database (Denmark)

Edgren, Gustaf; Tran, Trung Nam; Hjalgrim, Henrik

2007-01-01

BACKGROUND: Transfusion safety rests heavily on the health of blood donors. Although they are perceived as being healthier than average, little is known about their long-term disease patterns and to which extent the blood banks' continuous efforts to optimize donor selection has resulted...... in improvements. Mortality and cancer incidence among blood donors in Sweden and Denmark was investigated. STUDY DESIGN AND METHODS: All computerized blood bank databases were compiled into one database, which was linked to national population and health data registers. With a retrospective cohort study design, 1......,110,329 blood donors were followed for up to 35 years from first computer-registered blood donation to death, emigration, or December 31, 2002. Standardized mortality and incidence ratios expressed relative risk of death and cancer comparing blood donors to the general population. RESULTS: Blood donors had...

Preparation of Ni(OH){sub 2}-graphene sheet-carbon nanotube composite as electrode material for supercapacitors

Energy Technology Data Exchange (ETDEWEB)

Liu, Y.F. [School of Chemical Engineering and Technology, Harbin Institute of Technology, Harbin 150001 (China); College of Environmental and Chemical Engineering, Heilongjiang University of Science and Technology, Harbin 150022 (China); Yuan, G.H., E-mail: ygh@hit.edu.cn [School of Chemical Engineering and Technology, Harbin Institute of Technology, Harbin 150001 (China); Jiang, Z.H., E-mail: jiangzhaohua@hit.edu.cn [School of Chemical Engineering and Technology, Harbin Institute of Technology, Harbin 150001 (China); Yao, Z.P. [School of Chemical Engineering and Technology, Harbin Institute of Technology, Harbin 150001 (China); Yue, M. [Shenzhen BTR New Energy Materials INC., Shenzhen 528206 (China)

2015-01-05

Highlights: • CNT is introduced into graphene to prevent restacking by solvothermal reaction. • Ethanol as a low cost and green solvent is used in solvothermal reaction. • Ni(OH){sub 2} nanosheets were chemically precipitated into GS-CNT to increase the capacitance. - Abstract: Ni(OH){sub 2}-graphene sheet-carbon nanotube composite was prepared for supercapacitance materials through a simple two-step process involving solvothermal synthesis of graphene sheet-carbon nanotube composite in ethanol and chemical precipitation of Ni(OH){sub 2}. According to N{sub 2} adsorption/desorption analysis, the Brunauer–Emmett–Teller surface area of graphene sheet-carbon nanotube composite (109.07 m{sup 2} g{sup −1}) was larger than that of pure graphene sheets (32.06 m{sup 2} g{sup −1}), indicating that the added carbon nanotubes (15 wt.%) could prevent graphene sheets from restacking in the solvothermal reaction. The results of field emission scanning electron microscopy and transmission electron microscopy showed that Ni(OH){sub 2} nanosheets were uniformly loaded into the three-dimensional interconnected network of graphene sheet-carbon nanotube composite. The microstructure enhanced the rate capability and utilization of Ni(OH){sub 2}. The specific capacitance of Ni(OH){sub 2}-graphene sheet-carbon nanotube composite was 1170.38 F g{sup −1} at a current density of 0.2 A g{sup −1} in the 6 mol L{sup −1} KOH solution, higher than those provided by pure Ni(OH){sub 2} (953.67 Fg{sup −1}) and graphene sheets (178.25 F g{sup −1}). After 20 cycles at each current density (0.2, 0.4, 0.6, 0.8, 1.0 and 1.2 A g{sup −1}), the capacitance of Ni(OH){sub 2}-graphene sheet-carbon nanotube composite decreased 26.96% of initial capacitance compared to 74.52% for pure Ni(OH){sub 2}.

Controlled synthesis, formation mechanism, and carbon oxidation properties of Ho{sub 2}Cu{sub 2}O{sub 5} nanoplates prepared with a coordination-complex method

Energy Technology Data Exchange (ETDEWEB)

Guo, Rui [School of Resources and Materials, Northeastern University at Qinhuangdao 066004 (China); School of Metallurgy, Northeastern University, Shenyang 110004 (China); You, Junhua [School of Materials Science and Engineering, Shenyang University of Technology, Shenyang 110870 (China); Han, Fei; Li, Chaoyang; Zheng, Guiyuan; Xiao, Weicheng [School of Resources and Materials, Northeastern University at Qinhuangdao 066004 (China); Liu, Xuanwen, E-mail: lxw@mail.neuq.edu.cn [School of Resources and Materials, Northeastern University at Qinhuangdao 066004 (China); School of Metallurgy, Northeastern University, Shenyang 110004 (China)

2017-02-28

Highlights: • The crystallization mechanism relies on Ho{sup 3+} and Cu{sup 2+} diffusion. • The Ho{sub 2}Cu{sub 2}O{sub 5} particles are refined by the coordination complex method under N{sub 2} environment. • The catalytic oxidation activity of Ho{sub 2}Cu{sub 2}O{sub 5} samples for carbon is enhanced. - Abstract: Ho{sub 2}Cu{sub 2}O{sub 5} nanoplates with perovskite structures were synthesized via a simple solution method (SSM) and a coordination-complex method (CCM) using [HoCu(3,4-pdc){sub 2}(OAc)(H{sub 2}O){sub 3}]·8H{sub 2}O (L = 3,4-pyridinedicarboxylic acid) as a precursor. The CCM was also performed in an N{sub 2} environment (CCMN) under various calcination conditions. The crystallization processes were characterized using X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy. Ho{sub 2}Cu{sub 2}O{sub 5} formed through the diffusion of CuO into Ho{sub 2}O{sub 3} particles. Cu{sup 2+} diffused faster than Ho{sup 3+} during this process. The initial products of CCMN (along with the thermal decomposition products) were initially laminarized in the N{sub 2} atmosphere, which prevented the growth of CuO particles and decreased the size of the Ho{sub 2}Cu{sub 2}O{sub 5} particles. The final Ho{sub 2}Cu{sub 2}O{sub 5} particles from CCMN had a nanoplate morphology with an average thickness of 75 nm. The decomposition of organic molecules and protection from N{sub 2} played important roles in determining the morphology of the resulting Ho{sub 2}Cu{sub 2}O{sub 5}. The catalytic oxidation activity of Ho{sub 2}Cu{sub 2}O{sub 5} samples for carbon was characterized using a specific surface area measurement and thermogravimetric analysis, which revealed that the samples produced by CCMN had the highest catalytic activity.

Geographic patterns of carbon dioxide emissions from fossil-fuel burning, hydraulic cement production, and gas flaring on a one degree by one degree grid cell basis: 1950 to 1990

Energy Technology Data Exchange (ETDEWEB)

Brenkert, A.L. [ed.] [Oak Ridge National Lab., TN (United States). Carbon Dioxide Information Analysis Center; Andres, R.J. [Univ. of Alaska, Fairbanks, AK (United States). Inst. of Northern Engineering; Marland, G. [Oak Ridge National Lab., TN (United States). Environmental Sciences Div.; Fung, I. [Univ. of Victoria, British Columbia (Canada)]|[National Aeronautics and Space Administration, New York, NY (United States). Goddard Inst. for Space Studies; Matthews, E. [Columbia Univ., New York, NY (United States)]|[National Aeronautics and Space Administration, New York, NY (United States). Goddard Inst. for Space Studies

1997-03-01

Data sets of one degree latitude by one degree longitude carbon dioxide (CO{sub 2}) emissions in units of thousand metric tons of carbon (C) per year from anthropogenic sources have been produced for 1950, 1960, 1970, 1980 and 1990. Detailed geographic information on CO{sub 2} emissions can be critical in understanding the pattern of the atmospheric and biospheric response to these emissions. Global, regional and national annual estimates for 1950 through 1992 were published previously. Those national, annual CO{sub 2} emission estimates were based on statistics on fossil-fuel burning, cement manufacturing and gas flaring in oil fields as well as energy production, consumption and trade data, using the methods of Marland and Rotty. The national annual estimates were combined with gridded one-degree data on political units and 1984 human populations to create the new gridded CO{sub 2} emission data sets. The same population distribution was used for each of the years as proxy for the emission distribution within each country. The implied assumption for that procedure was that per capita energy use and fuel mix is uniform over a political unit. The consequence of this first-order procedure is that the spatial changes observed over time are solely due to changes in national energy consumption and nation-based fuel mix. Increases in emissions over time are apparent for most areas.

Influence of contemporary carbon originating from the 2003 Siberian forest fire on organic carbon in PM{sub 2.5} in Nagoya, Japan

Energy Technology Data Exchange (ETDEWEB)

Ikemori, Fumikazu, E-mail: ikemori@nagoyakankaken.net [Nagoya City Institute for Environmental Sciences, 5-16-8, Toyoda, Minami-ku, Nagoya 457-0841 (Japan); Graduate School of Environmental Studies, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464–8601 (Japan); Honjyo, Koji [Graduate School of Environmental Studies, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464–8601 (Japan); Yamagami, Makiko [Nagoya City Institute for Environmental Sciences, 5-16-8, Toyoda, Minami-ku, Nagoya 457-0841 (Japan); Nakamura, Toshio [Centre for Chronological Research, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8602 (Japan)

2015-10-15

In May 2003, high concentrations of organic carbon (OC) in PM{sub 2.5} were measured in Nagoya, a representative metropolitan area in Japan. To investigate the influence of possible forest fires on PM{sub 2.5} in Japan via long-range aerosol transport, the radiocarbon ({sup 14}C) concentrations of PM{sub 2.5} samples from April 2003 to March 2004 were measured. {sup 14}C concentrations in total carbon (TC) from May to early June showed higher values than those in other periods. The OC/elemental carbon (EC) ratios from May to early June were also significantly higher than the ones in other periods. In addition, OC concentrations from May to early June were typically high. These results indicate that the abundant OC fraction from May to early June in Nagoya consisted predominantly of contemporary carbon. Furthermore, simulations of diffusion and transport of organic matter (OM) in East Asia showed that abundant OM originating from East Siberia spread over East Asia and Japan in May and early June. Backward air mass trajectories from this time frame indicate that the air mass in Nagoya likely first passed through East Siberia where fire events were prevalent. However, the backward trajectories showed that the air mass after early June did not originate mainly from Siberia, and correspondingly, the {sup 14}C and OC concentrations showed lower values than those from May to early June. Therefore, the authors conclude that contemporary carbon originating from the forest fire in East Siberia was transported to Nagoya, where it significantly contributed to the high observed concentrations of both OC and {sup 14}C. - Highlights: • We analyzed the radiocarbon ({sup 14}C) concentration of TC in PM{sub 2.5} from Nagoya, Japan. • {sup 14}C concentrations from May to early June in 2003 were elevated. • The air mass at this time in Nagoya likely first passed through East Siberia. • Fire location data from MODIS indicate that fire events were prevalent in East Siberia. �

Sulphation and carbonation properties of hydrated sorbents from a fluidized bed CO{sub 2} looping cycle reactor

Energy Technology Data Exchange (ETDEWEB)

Vasilije Manovic; Edward J. Anthony; Dennis Y. Lu [CANMET Energy Technology Centre-Ottawa, Ottawa, ON (Canada)

2008-10-15

Sulphation and carbonation have been performed on hydrated spent residues from a 75 kW{sub th} dual fluidized bed combustion (FBC) pilot plant operating as a CO{sub 2} looping cycle unit. The sulphation and carbonation tests were done in an atmospheric pressure thermogravimetric analyzer (TGA), with the sulphation performed using synthetic flue gas (0.45% SO{sub 2}, 3% O{sub 2}, 15% CO{sub 2} and N{sub 2} balance). Additional tests were carried out in a tube furnace (TF) with a higher SO{sub 2} concentration (1%) and conversions were determined by quantitative X-ray diffraction (QXRD) analyses. The morphology of the sulphated samples from the TF was examined by scanning electron microscopy (SEM). Sulphation tests were performed at 850{sup o}C for 150 min and carbonation tests at 750{sup o}C, 10 cycles for 15 min (7.5 min calcination + 7.5 min carbonation). Sulphation conversions obtained for the hydrated samples depended on sample type: in the TGA, they were 75-85% (higher values were obtained for samples from the carbonator); and in the TF, values around 90% and 70% for sample from carbonator and calciner, respectively, were achieved, in comparison to the 40% conversion seen with the original sample. The SEM analyses showed significant residual porosity that can increase total conversion with longer sulphation time. The carbonation tests showed a smaller influence of the sample type and typical conversions after 10 cycles were 50% - about 10% higher than that for the original sample. The influence of hydration duration, in the range of 15-60 min, is not apparent, indicating that samples are ready for use for either SO{sub 2} retention, or further CO{sub 2} capture after at most 15 min using saturated steam. The present results show that, upon hydration, spent residues from FBC CO{sub 2} capture cycles are good sorbents for both SO{sub 2} retention and additional CO{sub 2} capture. 33 refs., 10 figs., 2 tabs.

Factors affecting biological reduction of CO{sub 2} into CH{sub 4} using a hydrogenotrophic methanogen in a fixed bed reactor

Energy Technology Data Exchange (ETDEWEB)

Kim, Jae Hyung; Pak, Daewon [Seoul National University of Science and Technology, Seoul (Korea, Republic of); Chang, Won Seok [Korea District Heating Corp, Seongnam (Korea, Republic of)

2015-10-15

Biological conversion of CO{sub 2} was examined in a fixed bed reactor inoculated with anaerobic mixed culture to investigate influencing factors, the type of packing material and the composition of the feeding gas mixture. During the operation of the fixed bed reactor by feeding the gas mixture (80% H{sub 2} and 20% CO{sub 2} based on volume basis), the volumetric CO{sub 2} conversion rate was higher in the fixed bed reactor packed with sponge due to its large surface area and high mass transfer from gas to liquid phase compared with PS ball. Carbon dioxide loaded into the fixed bed reactor was not completely converted because some of H{sub 2} was used for biomass growth. When a mole ratio of H{sub 2} to CO{sub 2} in the feeding gas mixture increased from 4 to 5, CO{sub 2} was completely converted into CH{sub 4}. The packing material with large surface area is effective in treating gaseous substrate such as CO{sub 2} and H{sub 2}. H{sub 2}, electron donor, should be providing more than required according to stoichiometry because some of it is used for biomass growth.

Boron Doped diamond films as electron donors in photovoltaics: An X-ray absorption and hard X-ray photoemission study

Energy Technology Data Exchange (ETDEWEB)