WorldWideScience

Sample records for sub-micron poly-styrene ps

  1. Hydrothermal Synthesis of Fe3O4 Nanoparticles and Flame Resistance Magnetic Poly styrene Nanocomposite

    Directory of Open Access Journals (Sweden)

    Kambiz Hedayati

    2017-01-01

    Full Text Available Fe3O4 nanostructures were synthesized via a facile hydrothermal reaction. The effect of various surfactants such as cationic and anionic on the morphology of the product was investigated. Magnetic nanoparticles were added to poly styrene for preparation of magnetic nanocomposite. Nanostructures were then characterized using X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectroscopy. The magnetic properties of the samples were also investigated using vibrating sample magnetometer. The magnesium ferrite nanoparticles exhibit super paramagnetic behaviour at room temperature, with a saturation magnetization of 66 emu/g and a coercivity less than 5 Oe. Distribution of the magnetic nanoparticles into poly styrene matrix increases the coercivity. Nanoparticles appropriately enhanced flame retardant property of the PS matrix. Nanoparticles act as barriers which decrease thermal transport and volatilization during decomposition of the polymer.

  2. Thermodynamics of coil-hyperbranched poly(styrene-b-acrylated epoxidized soybean oil) block copolymers

    Science.gov (United States)

    Lin, Fang-Yi; Hohmann, Austin; Hernández, Nacú; Cochran, Eric

    Here we present the phase behavior of a new type of coil-hyperbranched diblock copolymer: poly(styrene- b-acrylated epoxidized soybean oil), or PS-PAESO. PS-PAESO is an example of a biorenewable thermoplastic elastomer (bio-TPE). To date, we have shown that bio-TPEs can be economical commercial substitutes for their petrochemically derived analogues--such as poly(styrene- b-butadiene- b-styrene) (SBS)--in a range of applications including pressure sensitive adhesives and bitumen modification. From a polymer physics perspective, PS-PAESO is an interesting material in that it couples a linear coil-like block with a highly branched block. Thus in contrast to the past five decades of studies on linear AB diblock copolymers, coil-hyperbranched block copolymers are relatively unknown to the community and can be expected to deviate substantially from the standard ``universal'' phase behavior in the AB systems. To explore these new materials, we have constructed a library of PS-PAESO materials spanning a range of molecular weight and composition values. The phase transition behavior and the morphology information will be interpreted by isochronal temperature scanning in dynamic shear rheology, small angle X-ray scattering and the corresponding transmission electron microscopy.

  3. Synthesis of polystyrene, poly(styrene/4-vinylpyridine), poly(p-nitrostyrene) and poly(p-aminostyrene)-coated silica and their extraction capabilities for amphetamine

    Energy Technology Data Exchange (ETDEWEB)

    Sun Changmei; Zhang Shuanhong [School of Chemistry and Materials Science, Ludong University, Yantai, Shandong 264025 (China); Qu Rongjun, E-mail: qurongjun@eyou.com [School of Chemistry and Materials Science, Ludong University, Yantai, Shandong 264025 (China); Sun Tao; Zhang Ying; Zhang Xiang; Song Jingyang [School of Chemistry and Materials Science, Ludong University, Yantai, Shandong 264025 (China)

    2010-11-01

    Several novel organic-inorganic hybrid materials, including polystyrene-coated silica (SG-PS), poly(styrene/4-vinylpyridine)-coated silica (SG-PVP), poly(p-nitrostyrene)-coated silica (SG-PS-NO{sub 2}) and poly(p-aminostyrene)-coated silica (SG-PS-NH{sub 2}), were synthesized in order to improve the extraction methods of harmful stimulants via solid phase extraction. The materials were characterized using infrared spectra (IR), scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET) surface area measurement and thermogravimetric analysis (TG). The application of the new materials in solid phase extraction columns to extract methamphetamine revealed that the extraction capability of poly(styrene/4-vinylpyridine)-coated silica is the best among the four materials, which provides novel supporter materials for extracting amphetamine-derived drugs.

  4. Synthesis and kinetics studies of poly(styrene-b-vinylmethylsiloxane) and its thin film ordering by thermal and solvent annealing

    Science.gov (United States)

    Chatterjee, Sourav; Uddin, Md Fakar; Lwoya, Baraka; Albert, Julie N. L.

    Nano-structured thin film materials are important materials that find uses in templating and membrane applications. Block copolymers (BCP) have gained considerable attention for next-generation lithographic masks due to their self-assemble into morphologies with periodic sub 20 nm feature sizes with high regularity and reproducibility. A novel synthetic block copolymer of poly(styrene-b-vinylmethylsiloxane) (PS-b-PVMS) was synthesized. Like poly(styrene-b-dimethylsiloxane), this polymer has a high Flory Huggins interaction parameter between blocks to minimize feature size. Furthermore, incorporation of the vinyl side group provides an opportunity for post-polymerization chemical modification to manipulate the interaction parameter or impart functionality for various applications. Synthesis and kinetic studies of PS-b-PVMS as well as PS and PVMS homopolymers will be presented. All polymers are well characterized by proton NMR and GPC. As proof of concept, we show that block copolymers having different block fractions self-assemble into the expected nanostructures (lamellae, cylinders, spheres). Thin film studies also will be presented showing how the ordering of PS-b-PVMS is affected by different solvent and thermal annealing conditions.

  5. Functionalized Nanochannels from Self-Assembled and Photomodified Poly(Styrene-b-Butadiene-b-Styrene).

    Science.gov (United States)

    Sutisna, Burhannudin; Polymeropoulos, George; Musteata, Valentina; Sougrat, Rachid; Smilgies, Detlef-M; Peinemann, Klaus-Viktor; Hadjichristidis, Nikolaos; Nunes, Suzana P

    2017-10-04

    Membranes are prepared by self-assembly and casting of 5 and 13 wt% poly(styrene-b-butadiene-b-styrene) (PS-b-PB-b-PS) copolymers solutions in different solvents, followed by immersion in water or ethanol. By controlling the solution-casting gap, porous films of 50 and 1 µm thickness are obtained. A gradient of increasing pore size is generated as the distance from the surface increased. An ordered porous surface layer with continuous nanochannels can be observed. Its formation is investigated, by using time-resolved grazing incident small angle X-ray scattering, electron microscopy, and rheology, suggesting a strong effect of the air-solution interface on the morphology formation. The thin PS-b-PB-b-PS ordered films are modified, by promoting the photolytic addition of thioglycolic acid to the polybutadiene groups, adding chemical functionality and specific transport characteristics on the preformed nanochannels, without sacrificing the membrane morphology. Photomodification increases fivefold the water permeance to around 2 L m(-2) h(-1) bar(-1) , compared to that of the unmodified one. A rejection of 74% is measured for methyl orange in water. The membranes fabrication with tailored nanochannels and chemical functionalities can be demonstrated using relatively lower cost block copolymers. Casting on porous polyacrylonitrile supports makes the membranes even more scalable and competitive in large scale. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Morphology-properties relationship on nanocomposite films based on poly(styrene-block-diene-block-styrene copolymers and silver nanoparticles

    Directory of Open Access Journals (Sweden)

    2011-02-01

    Full Text Available A comparative study on the self-assembled nanostructured morphology and the rheological and mechanical properties of four different triblock copolymers, based on poly(styrene-block-diene-block-styrene and poly(styrene-block-diene-block-styrene matrices, and of their respective nanocomposites with 1 wt% silver nanoparticles, is reported in this work. In order to obtain well-dispersed nanoparticles in the block copolymer matrix, dodecanethiol was used as surfactant, showing good affinity with both nanoparticles and the polystyrene phase of the matrices as predicted by the solubility parameters calculated based on Hoftyzer and Van Krevelen theory. The block copolymer with the highest PS content shows the highest tensile modulus and tensile strength, but also the smallest elongation at break. When silver nanoparticles treated with surfactant were added to the block copolymer matrices, each system studied shows higher mechanical properties due to the good dispersion and the good interface of Ag nanoparticles in the matrices. Furthermore, it has been shown that semiempirical models such as Guth and Gold equation and Halpin-Tsai model can be used to predict the tensile modulus of the analyzed nanocomposites.

  7. Poly(styrene-co-divinylbenzene-co-2-ethylhexyl)acrilate membranes with interconnected macroporous structure

    OpenAIRE

    Sevšek, Urška; Stropnik, Črtomir; Krajnc, Peter; Pulko, Irena; Seifried, Silvo

    2015-01-01

    A combination of doctor blading and emulsion templating was used to prepare macroporous poly(styrene-co-divinylbenzene-co-2-ethylhexylacrylate) and poly(styrene-co-divinylbenzene) membranes with an interconnected porous structure. Water in oil high internal phase emulsions including monomers in the oil phase were cast onto a glass plate and polymerised at elevated temperature. After purification porous polyHIPE membranes were obtained. The volume ratio of aqueous phase (75 % or 85 %) and the ...

  8. Nanostructured Double Hydrophobic Poly(Styrene-b-Methyl Methacrylate) Block Copolymer Membrane Manufactured Via Phase Inversion Technique

    KAUST Repository

    Karunakaran, Madhavan

    2016-03-11

    In this paper, we demonstrate the formation of nanostructured double hydrophobic poly(styrene-b-methyl methacrylate) (PS-b-PMMA) block copolymer membranes via state-of-the-art phase inversion technique. The nanostructured membrane morphologies are tuned by different solvent and block copolymer compositions. The membrane morphology has been investigated using FESEM, AFM and TEM. Morphological investigation shows the formation of both cylindrical and lamellar structures on the top surface of the block copolymer membranes. The PS-b-PMMA having an equal block length (PS160K-b-PMMA160K) exhibits both cylindrical and lamellar structures on the top layer of the asymmetric membrane. All membranes fabricated from PS160K-b-PMMA160K shows an incomplete pore formation in both cylindrical and lamellar morphologies during the phase inversion process. However, PS-b-PMMA (PS135K-b-PMMA19.5K) block copolymer having a short PMMA block allowed us to produce open pore structures with ordered hexagonal cylindrical pores during the phase inversion process. The resulting PS-b-PMMA nanostructured block copolymer membranes have pure water flux from 105-820 l/m2.h.bar and 95% retention of PEG50K

  9. Controlled Release of Imidacloprid from Poly Styrene-Diacetone - Nanoformulation

    Science.gov (United States)

    Qian, Kun; Guo, Yanzhen; He, Lin

    2012-01-01

    Imidacloprid is a neonicotinoids insecticide, which is important for the cash crops such as tomato, rape and so on. The conventional formulation does not only increase the loss of pesticide but also leads to environmental pollution. Controlled-release formulations of pesticide are highly desirable not only for attaining the most effective utilization of the pesticide, but also for reducing environmental pollution. Pesticide imidacloprid was incorporated in poly (styrene-diacetone crylamide)-based formulation to obtain controlled release properties, and the imidacloprid nanocontrolled release formulation was characterized by infrared (IR) and field emission scanning electron microscope (FESEM). Factors related to loading efficiency, swelling and release behaviors of the formulation were investigated. It showed that the loading efficiency could reach about 40% (w/w). The values for the diffusion exponent "n" were in the range of 0.31-0.58, which indicated that the release of imidacloprid was diffusion-controlled. The time taken for 50% of the active ingredient to be released into water, T50, was also calculated for the comparison of formulations in different conditions. The results showed that the formulation with higher temperature and more diacetone crylamide had lower value of T50, which means a quicker release of the active ingredient. This study highlighted some pieces of evidence that improved pesticide incorporation and slower release were linked to potential interactions between the pesticide and the polymer.

  10. Mixed micellar nanoparticle of amphotericin B and poly styrene-block-poly ethylene oxide reduces nephrotoxicity but retains antifungal activity.

    Science.gov (United States)

    Han, Kun; Miah, M A Jalil; Shanmugam, Srinivasan; Yong, Chul Soon; Choi, Han-Gon; Kim, Jung Ae; Yoo, Bong Kyu

    2007-10-01

    Mixed micellar nanoparticle consisting of amphotericin B (AmB) and poly styrene-block-poly ethylene oxide (PS-block-PEO) was prepared by high pressure homogenizer. Nephrotoxicity of the nanoparticle was investigated along with antifungal activity and self-aggregation status of the drug in the nanoparticle. Nephrotoxicity was markedly reduced when AmB was intravenously administered to rats as mixed micellar nanoparticle with PS-block-PEO in terms of transmission electron microscopy of tubular cells and creatinine clearance. Antifungal activity of AmB was not altered when the drug was in the form of mixed micellar nanoparticle compared to both conventional formulation and AmB micelle treated by same procedure without PS-block-PEO. Self-aggregation status of AmB molecules revealed monomeric in the mixed micellar nanoparticle with PS-block-PEO up to the therapeutic level of the drug (1-3 mM). The reduced nephrotoxicity of AmB in mixed micellar nanoparticle may be associated with the existence of the drug as monomeric form in the nanoparticle. Based on our result, formulation of AmB as mixed micellar nanoparticle with PS-block-PEO may be a promising alternative for the treatment of fungal diseases in patients who are at risk of renal dysfunction.

  11. Incorporation and release of cloxacillin sodium in micelles of poly(styrene-b-2-vinyl pyridine-b-ethylene oxide).

    Science.gov (United States)

    Khanal, Anil; Nakashima, Kenichi

    2005-11-02

    A novel drug carrier system was constructed from anionic drug cloxacillin sodium (CLX) and micelle of poly(styrene-b-2-vinyl pyridine-b-ethylene oxide) (PS-PVP-PEO) by incorporating the former into the micelle of the latter. The incorporation of CLX into the micelle of PS-PVP-PEO was confirmed by zeta-potential measurements, dynamic light scattering (DLS), and fluorescence spectroscopy. In the absence of the anionic drug, CLX, the zeta-potential of neat PS-PVP-PEO micelle was +13 mV under aqueous acidic condition due to the presence of positive charges in the PVP unit. The addition of CLX into the micelle of PS-PVP-PEO decreased the zeta-potential of the micelle smoothly and finally led to a minimum zeta-potential around 0 mV. This fact shows that the added CLX is effectively incorporated into the PS-PVP-PEO micelle by electrostatic attraction. In concomitant with the decrease in zeta-potential, a decrease in hydrodynamic diameter from 94 to 69 nm was observed on addition of CLX to the PS-PVP-PEO micellar solution. This fact also indicates the incorporation of CLX into the PS-PVP-PEO micelles because the binding of CLX to the PVP block of the micelles induces a conformational change from an extended to a shrunken form due to the cancellation of the repulsive force in the PVP blocks by CLX. Fluorescence quenching of pyrene by CLX gave additional evidence for the effective bindings of CLX to the PS-PVP-PEO micelles. Further, release of CLX from the nanoaggregates of CLX/PS-PVP-PEO was investigated in vitro. It was found that the release kinetics of the CLX is conformed to a model based on the consecutive chemical kinetics.

  12. Micelles of poly(styrene-b-2-vinylpyridine-b-ethylene oxide) with blended polystyrene core and their application to the synthesis of hollow silica nanospheres.

    Science.gov (United States)

    Liu, Dian; Sasidharan, Manickam; Nakashima, Kenichi

    2011-06-15

    Core-shell-corona (CSC) micelles of asymmetric triblock copolymer, poly(styrene-b-2-vinylpyridine-b-ethylene oxide) (PS-PVP-PEO), containing polystyrene homopolymer (homo-PS) in the core were successfully prepared in aqueous media. The influence of homo-PS contents over the formation of the micelles was investigated thoroughly by various techniques such as dynamic light scattering (DLS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and fluorescence spectroscopy. It was found that the size of the PS core of the micelle was increased by the addition of homo-PS as observed by DLS and TEM techniques. The SEM and TEM measurements confirm the spherical morphology of the micelles and enlargement of PS core over the addition of homo-PS. The increase in the PS core volume of the PS-PVP-PEO micelles is attributed to the insertion of homo-PS in the PS core. The micelles have also been demonstrated as facile soft templates for synthesis of hollow silica nanospheres. The average diameter of the spherical hollow particles could be tuned between 30.6 and 38.8 nm with cavity sizes ranging from 20.7 to 28.5 nm using tetramethoxysilane as silica precursors under mild acidic conditions. The facile synthesis of hollow silica using the CSC micelles with different homo-PS contents indicates that the hollow void size can be controlled within a range of several nanometers. Copyright © 2011 Elsevier Inc. All rights reserved.

  13. “Uncontrolled” Preparation of Disperse Poly(lactide)- block -poly(styrene)- block -poly(lactide) for Nanopatterning Applications

    Energy Technology Data Exchange (ETDEWEB)

    Vanderlaan, Marie E.; Hillmyer, Marc A. (UMM)

    2016-11-08

    We report the facile synthesis of well-defined ABA poly(lactide)-block-poly(styrene)-block-poly(lactide) (LSL) triblock copolymers having a disperse poly(styrene) midblock (Ð = 1.27–2.24). The direct synthesis of telechelic α,ω-hydroxypoly(styrene) (HO-PS-OH) midblocks was achieved using a commercially available difunctional free radical diazo initiator 2,2'-azobis[2-methyl-N-(2-hydroxyethyl)propionamide]. Poly(lactide) (PLA) end blocks were subsequently grown from HO-PS-OH macroinitiators via ring-opening transesterification polymerization of (±)-lactide using the most common and prevalent catalyst system available, tin(II) 2-ethylhexanoate. Fourteen LSL triblock copolymers with total molar masses Mn,total = 24–181 kg/mol and PLA volume fractions fPLA = 0.15–0.68 were synthesized and thoroughly characterized. The self-assembly of symmetric triblocks was analyzed in the bulk using small-angle X-ray scattering and in thin films using grazing incidence small-angle X-ray scattering and atomic force microscopy. We demonstrate both the bulk and thin film self-assembly of LSL disperse triblocks gave well-organized nanostructures with uniform domain sizes suitable for nanopatterning applications.

  14. Development of bioconjugated dye-doped poly(styrene-co-maleimide) nanoparticles as a new bioprobe

    CSIR Research Space (South Africa)

    Swanepoel, A

    2015-02-01

    Full Text Available -1 Journal of Materials Chemistry B Development of bioconjugated dye-doped poly(styrene-co- maleimide) nanoparticles as a new bioprobe A. Swanepoel, I. du Preez, T. Mahlangu, A. Chetty and B. Klumperman Abstract Fluorescent dye-doped poly...

  15. Ionomeric membranes based on partially sulfonated poly(styrene) : synthesis, proton conduction and methanol permeation

    NARCIS (Netherlands)

    Picchioni, F.; Tricoli, V.; Carretta, N.

    2000-01-01

    Homogeneuosly sulfonated poly(styrene) (SPS) was prepared with various concentration of sulfonic acid groups in the base polymer. Membranes cast from these materials were investigated in relation to proton conductivity and methanol permeability in the temperature range from 20°C to 60°C. It was

  16. Synthesis and Directed Self-Assembly of Modified PS-b-PMMA for Sub-10 nm Nanolithography

    National Research Council Canada - National Science Library

    Li, Xuemiao; Li, Jie; Deng, Hai

    2017-01-01

    .... The conventional organic-organic DSA materials such as poly[styrene-block-(methyl methacrylate)] (PS-b-PMMA) have been extensively studied, however, the low etch contrast between two blocks and the difficulty to reduce L0...

  17. Matrix-assisted laser desorption/ionization-collision induced dissociation of poly(styrene).

    Science.gov (United States)

    Jackson, A T; Yates, H T; Scrivens, J H; Green, M R; Bateman, R H

    1998-04-01

    Matrix-assisted laser desorption/ionization-collision induced dissociation (MALDI-CID) has been employed for the analysis of poly(styrene) in a tandem hybrid sector-time of flight instrument. Spectra are shown for adducts of poly(styrene) with copper and silver ions. The distributions of fragment ion peaks were found to be consistent from precursor ions containing both metal ions. It is shown how the masses of the end groups of the polymer may be inferred from the mass-to-charge ratios of two of the series of ion peaks that are seen in the MALDI-CID spectra. Mechanisms are proposed for the formation of some of the other series of ion peaks that are observed in the spectra.

  18. Surfactant effects on morphology-properties relationships of silver-poly(styrene-b-isoprene-b-styrene) block copolymer nanocomposites.

    Science.gov (United States)

    Peponi, Laura; Tercjak, Agnieszka; Torre, Luigi; Kenny, Josè M; Mondragon, Iñaki

    2009-03-01

    Good dispersion of silver nanoparticles in poly(styrene-b-isoprene-b-styrene) block copolymer matrix has been achieved by adding dodecanethiol as surfactant to lower the high surface energy of metal nanoparticles. First, the influence of surfactant in the cylindrical nanostructure of neat block copolymer matrix has been analyzed. Taking into account the high solubility between dodecanethiol and the PS block of the SIS block copolymer, when silver nanoparticles and surfactant have been added to the block copolymer matrix its morphology changes from cylindrical to lamellar nanostructure. For the nanocomposite without surfactant, the block copolymer matrix loses its capability to self-assemble in lamellar nanostructure and in this case, agglomeration of silver nanoparticles occurs. Rheological, mechanical and morphological analysis were carried out in order to study the optimal content of surfactant necessary to obtain well-dispersed nanoparticles without worsen the final properties of the nanocomposite. The best silver/dodecanethiol w/w ratio appears to be 1, as confirmed by UV-Vis analysis. Moreover, semi-empirical models, such as Guth and Gold, and Halpin-Tsai, have been used in order to both predict and verify experimental tensile modulus of the obtained nanocomposites. The Guth and Gold equation, applicable to elastomers filled with spherical nanoparticles, provides a result closer to the experimental values than Halpin-Tsai model.

  19. Proton conducting sulphonated fluorinated poly(styrene) crosslinked electrolyte membranes

    Energy Technology Data Exchange (ETDEWEB)

    Soules, A.; Ameduri, B.; Boutevin, B.; David, G. [Institut Charles Gerhardt UMR CNRS 5253 Equipe, Ingenierie et Architectures Macromoleculaires,' ' Ecole Nationale Superieure de Chimie de Montpellier, 8 rue de l' Ecole Normale, 34296 Montpellier, Cedex 05 (France); Perrin, R. [CEA Le Ripault Departement des Materiaux, DMAT/SCMF/LSTP, BP16 - 37260 Monts (France); Gebel, G. [Structure et Proprietes des Architectures Moleculaires UMR 5819 (CEA-CNRS-UJF), INAC, SPrAM, CEA Grenoble, 17 Rue des Martyrs, 38054 Grenoble, Cedex 9 (France)

    2011-10-15

    Potential membranes for polymer electrolyte membrane fuel cell based on crosslinked sulphonated fluorinated polystyrenes (PS) were synthesised in two steps. First, azide-telechelic polystyrene was obtained by iodine transfer polymerisation of styrene in the presence of 1,6-diiodoperfluorohexane followed by azido chain-end functionalisation. Then azide-telechelic polystyrene was efficiently crosslinked with 1,10-diazido-1H,1H,2H,2H,9H,9H,10H,10H-perfluorodecane under UV irradiation. After 45 min only, almost completion of azide crosslinking could be achieved, resulting in crosslinked membranes with insoluble fractions higher than 95%. The sulphonation of the crosslinked membranes afforded ionic exchange capacities (IECs) ranging from 2.2 to 3.2 meq g{sup -1}. The hydration number was shown to be very high (from 30 to 75), depending on both the content of perfluorodecane and of sulphonic acid groups. The morphology of the membranes, assessed by small-angle X-ray scattering, was found to be a lamellar-type structure with two types of ionic domains. For the membrane that exhibited an IEC value of 2.2 meq.g{sup -1}, proton conductivity was in the same range as that of Nafion {sup registered} (120-135 mS.cm{sup -1}), whereas the membrane IEC value of 3.2 meq.g{sup -1} showed a proton conductivity higher than that of Nafion {sup registered} in liquid water from 25 to 80 C, though a high water uptake. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. Scanning SQUID susceptometers with sub-micron spatial resolution

    Energy Technology Data Exchange (ETDEWEB)

    Kirtley, John R., E-mail: jkirtley@stanford.edu; Rosenberg, Aaron J.; Palmstrom, Johanna C.; Holland, Connor M.; Moler, Kathryn A. [Department of Applied Physics, Stanford University, Stanford, California 94305-4045 (United States); Paulius, Lisa [Department of Physics, Western Michigan University, Kalamazoo, Michigan 49008-5252 (United States); Spanton, Eric M. [Department of Physics, Stanford University, Stanford, California 94305-4045 (United States); Schiessl, Daniel [Attocube Systems AG, Königinstraße 11A, 80539 Munich (Germany); Jermain, Colin L.; Gibbons, Jonathan [Department of Physics, Cornell University, Cornell, Ithaca, New York 14853 (United States); Fung, Y.-K.K.; Gibson, Gerald W. [IBM Research Division, T. J. Watson Research Center, Yorktown Heights, New York 10598 (United States); Huber, Martin E. [Department of Physics, University of Colorado Denver, Denver, Colorado 80217-3364 (United States); Ralph, Daniel C. [Department of Physics, Cornell University, Cornell, Ithaca, New York 14853 (United States); Kavli Institute at Cornell, Ithaca, New York 14853 (United States); Ketchen, Mark B. [OcteVue, Hadley, Massachusetts 01035 (United States)

    2016-09-15

    Superconducting QUantum Interference Device (SQUID) microscopy has excellent magnetic field sensitivity, but suffers from modest spatial resolution when compared with other scanning probes. This spatial resolution is determined by both the size of the field sensitive area and the spacing between this area and the sample surface. In this paper we describe scanning SQUID susceptometers that achieve sub-micron spatial resolution while retaining a white noise floor flux sensitivity of ≈2μΦ{sub 0}/Hz{sup 1/2}. This high spatial resolution is accomplished by deep sub-micron feature sizes, well shielded pickup loops fabricated using a planarized process, and a deep etch step that minimizes the spacing between the sample surface and the SQUID pickup loop. We describe the design, modeling, fabrication, and testing of these sensors. Although sub-micron spatial resolution has been achieved previously in scanning SQUID sensors, our sensors not only achieve high spatial resolution but also have integrated modulation coils for flux feedback, integrated field coils for susceptibility measurements, and batch processing. They are therefore a generally applicable tool for imaging sample magnetization, currents, and susceptibilities with higher spatial resolution than previous susceptometers.

  1. Stepwise Swelling of a Thin Film of Lamellae-Forming Poly(styrene-b-butadiene) in Cyclohexane Vapor

    DEFF Research Database (Denmark)

    Di, Zhenyu; Posselt, Dorthe; Smilgies, Detlef-M.

    2012-01-01

    We investigated the swelling of a thin film of lamellae-forming poly(styrene-b-butadiene) in cyclohexane vapor. The vapor pressure and thus the degree of swelling of the film are increased in a stepwise manner using a custom-built sample cell. The resulting structural changes during and after eac...

  2. Disruption of the Electrical Conductivity of Highly Conductive Poly(3,4-ethylenedioxythiophene) : Poly(styrene sulfonate) by Hypochlorite

    NARCIS (Netherlands)

    Oostra, A. Jolt; Bos, Karel H.W. van den; Blom, Paul W.M.; Michels, Jasper J.

    2013-01-01

    The effect of hypochlorite treatment on the layer thickness and conductivity of a state-of-the-art high conducting poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is investigated as a function of exposure time and hypochlorite concentration. Because of overoxidation by the

  3. Influence of the degree of hydrolysis of poly(styrene-alt-maleic anhydride) on miscibility with poly(vinyl acetate)

    NARCIS (Netherlands)

    Bosma, M.; Vorenkamp, E.J.; Brinke, G. ten; Challa, G.

    1988-01-01

    The influence of the hydrolysis of anhydride groups in poly(styrene-alt-maleic anhydride) (PSMA) on its miscibility with poly(vinyl acetate) (PVAc) is investigated. The cloudpoint curves of these blends are determined as a function of the degree of hydrolysis. The miscibility is shown to improve

  4. Interactions between halloysite nanotubes and poly(styrene sulfonate) in solution

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Heon; Ryu, Jung Ju; Shin, Joo Huei; Lee, Hoik; Sohn, Dae Won [Dept. of Chemistry and Research Institute for Convergence of Basic Science, Hanyang University, Seoul (Korea, Republic of); Kim, Ick Soo [Nano Fusion Technology Research Lab, Division of Frontier Fibers, Institute for Fiber Engineering (IFES), Interdisciplinary Cluster for Cutting Edge Research (ICCER), Shinshu University, Nagano (Japan)

    2017-01-15

    The interaction between halloysite nanotubes (HNT) and poly(styrene sulfonate) (PSS) in aqueous solution was investigated by dynamic light scattering. Dynamic behavior of HNT/PSS was observed with different salt, HNT, and PSS concentrations. The HNT colloids were stabilized by PSS over a wide range of HNT concentrations, and HNT suspension in dilute solution formed stable HNT/PSS particles. On the other hand, HNT particles aggregated as sediments at higher concentrations due to strong attraction among HNT rods, and HNT aggregates were stabilized by additional PSS. The interactions between HNT and PSS are described by the van der Waals–London force (VDWL). The stabilization process of HNT/PSS particles in salt solution was proposed by comparing the hydrodynamic radii and apparent intensities of samples. The results demonstrate that electrostatic, steric, and depletion stabilization processes are responsible for the stable dispersion of HNT even at high concentration.

  5. Radiation-induced degradation of poly(styrene-co-methylmethacrylate) and blends of polystyrene and polymethylmethacrylate

    Science.gov (United States)

    Torikai, Ayako; Harayama, Ken-Ichi; Hayashi, Nobutomo; Mitsuoka, Takuya; Fueki, Kenji

    1994-05-01

    The γ-ray-induced degradation of poly(styrene-co-methyl-methacrylate) [poly(St-co-MMA)] and blends of polystyrene (PSt) and polymethylmethacrylate (PMMA) was investigated by ultraviolet (UV), Fourier transform infrared (FTIR) spectroscopy and viscosity measurements. The optical density around 250 nm decreases linearly with the electron fraction of PSt in the blends, but this does not hold in case of the degradation of poly(St-co-MMA). Similar trends are seen for the decrease in the amount of ester groups, oxidation product formation and the number of chain scission (Cs). A protective effect due to the St component was observed in case of the degradation of poly(St-co-MMA), but it was not observed for the blends. The spatial extent of protection affected by St unit was deduced by assuming a random distribution of MMA and St throughout the copolymer molecule.

  6. Discovering sub-micron ice particles across Dione' surface

    Science.gov (United States)

    Scipioni, Francesca; Schenk, Pual; Tosi, Federico; Clark, Roger; Dalle Ore, Cristina; Combe, Jean-Philippe

    2015-11-01

    Water ice is the most abundant component of Saturn’s mid-sized moons. However, these moons show an albedo asymmetry - their leading sides are bright while their trailing side exhibits dark terrains. Such differences arise from two surface alteration processes: (i) the bombardment of charged particles from the interplanetary medium and driven by Saturn’s magnetosphere on the trailing side, and (ii) the impact of E-ring water ice particles on the satellites’ leading side. As a result, the trailing hemisphere appears to be darker than the leading side. This effect is particularly evident on Dione's surface. A consequence of these surface alteration processes is the formation or the implantation of sub-micron sized ice particles.The presence of such particles influences and modifies the surfaces' spectrum because of Rayleigh scattering by the particles. In the near infrared range of the spectrum, the main sub-micron ice grains spectral indicators are: (i) asymmetry and (ii) long ward minimum shift of the absorption band at 2.02 μm (iii) a decrease in the ratio between the band depths at 1.50 and 2.02 μm (iv) a decrease in the height of the spectral peak at 2.6 μm (v) the suppression of the Fresnel reflection peak at 3.1 μm and (vi) the decrease of the reflection peak at 5 μm relative to those at 3.6 μm.We present results from our ongoing work mapping the variation of sub-micron ice grains spectral indicators across Dione' surface using Cassini-VIMS cubes acquired in the IR range (0.8-5.1 μm). To characterize the global variations of spectral indicators across Dione' surface, we divided it into a 1°x1° grid and then averaged the band depths and peak values inside each square cell.We will investigate if there exist a correspondence with water ice abundance variations by producing water ice' absorption band depths at 1.25, 1.52 and 2.02 μm, and with surface morphology by comparing the results with ISS color maps in the ultraviolet, visible and infrared

  7. Short range investigation of sub-micron zirconia particles

    Energy Technology Data Exchange (ETDEWEB)

    Caracoche, M C; Martinez, J A [Departamento de Fisica, IFLP, Facultad de Ciencias Exactas, CICPBA, Universidad Nacional de La Plata (Argentina); Rivas, P C [IFLP-CONICET, Facultad de Ciencias Agrarias y Forestales, Universidad Nacional de La Plata (Argentina); Bondioli, F; Cannillo, V [Dipartimento di Ingegniria dei Materiali e dell' Ambiente, Facolta di Ingegneria, Universita di Modena e Reggio Emilia (Italy); Ferrari, A M, E-mail: cristina@fisica.unlp.edu.a [Dipartimento di Scienza a Metodi dell' Ingegneria, Universita di Modena e Reggio Emilia (Italy)

    2009-05-01

    The Perturbed Angular Correlations technique was used to determine the configurations around Zirconium ions and their thermal behavior in non-aggregated sub-micron zirconia spherical particles. Three residues containing- Zr surroundings were determined for the non-crystalline starting particles, which were identified under the assumption of a certain chemical reactions sequence during synthesis. While the one made up mainly by hydroxyl groups was common to both samples, the two involving mainly organic residues were particle size dependent. Upon crystallization, both samples stabilized in the t'- and t- tetragonal forms and the Xc-cubic form but their amounts and temperatures of appearance were different. On heating, the structure of the smaller particles became gradually monoclinic achieving total degradation upon the subsequent cooling to RT.

  8. Lipid-induced degradation in biocompatible poly(Styrene-Isobutylene-Styrene) (SIBS) thermoplastic elastomer.

    Science.gov (United States)

    Fittipaldi, Mauro; Grace, Landon R

    2017-04-01

    The thermoplastic elastomer Poly(Styrene-block-Isobutylene-block-Styrene) (SIBS) is highly biocompatible, which has led to its use in several commercially-available implants. However, lipid-induced degradation has been previously identified as a primary cause of failure in long-term SIBS implants subject to mechanical loading. Thus, understanding the mechanisms and extent of lipid-induced damage and the role of styrene-isobutylene ratio and molecular weight is critical to improving longevity of SIBS-based implants in order to fully exploit the biocompatibility advantages. Samples of four different SIBS formulations were fabricated via compression molding, immersed to lipid saturation contents from 5 to 80% by weight, and tested in uniaxial tension, stress relaxation, and dynamic creep modes. Degradation mechanisms were investigated via infrared spectroscopy, chromatography, and microscopy. No evidence of lipid-induced chemical interactions or chain scissoring was observed. However, a decrease in tensile strength, loss of dynamic creep performance and faster relaxation with increasing lipid content is attributed to strong internal straining. The magnitude of these losses is inversely proportional to both molecular weight and styrene content, suggesting that selection of these variables during the design phase should be based not only on the mechanical requirements of the application, but the expected degree of lipid exposure. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Structure of poly(styrene-b-ethylene-alt-propylene) diblock copolymer micelles in squalane.

    Science.gov (United States)

    Choi, Soo-Hyung; Bates, Frank S; Lodge, Timothy P

    2009-10-22

    The temperature dependence of the micellar structures formed by poly(styrene-b-ethylene-alt-propylene) (SEP) diblock copolymers in squalane, a highly selective solvent for the PEP blocks, has been studied using dynamic light scattering (DLS) and small-angle X-ray scattering (SAXS). Four SEP diblock copolymers were prepared by sequential anionic polymerization of styrene and isoprene, followed by hydrogenation of the isoprene blocks, to yield SEP(17-73), SEP(26-66), SEP(36-69), and SEP(42-60), where the numbers indicate block molecular weights in kDa. All four polymers formed well-defined spherical micelles. In dilute solution, DLS provided the temperature-dependent mean hydrodynamic radius, R(h), and its distribution, while detailed fitting of the SAXS profiles gave the core radius, R(c), the equivalent hard sphere radius, R(hs), and an estimate of the aggregation number, N(agg). In general, the micelles became smaller as the critical micelle temperature (CMT) was approached, which was well above the glass transition of the core block. As concentration increased the micelles packed onto body centered cubic lattices for all four copolymers, which underwent order-disorder transitions upon heating near the dilute solution CMTs. The results are discussed in terms of current understanding of block copolymer solution self-assembly, and particular attention is paid to the issue of equilibration, given the high glass transition temperature of the core block.

  10. Nickel ion removal using nanoporous poly(styrene-co divinyl benzene) copolymer

    Energy Technology Data Exchange (ETDEWEB)

    Bagherian, Abbas; Ghorbani, Mohsen; Mirzababaei, Seyed Nima [Babol University of Technology, Babol (Iran, Islamic Republic of)

    2015-10-15

    To achieve a suitable porous structure and high mechanical strength that is extremely valuable properties in adsorbent polymeric particles, poly(styrene-co-divinylbenzene) with high amounts of cross-linker and diverse proportions of diluent agent (porogen) were synthesized according to the methodology of the suspension polymerization technique. The structural characteristics of the particles and their adsorption properties for adsorption of Nickel ions were studied. Effect of solvent type and monomeric fraction on particles morphology and porosity was discussed. The solvents including n-heptane (HEP) and acetonitrile and monomer fraction was 50% and 30% of divinylbenzene (DVB). From the results obtained, we decided to apply an adsorbent with high mechanical strength and a porous structure appropriate for absorbing the Ni(II). The copolymer was characterized by Fourier transform infrared (FT-IR) analysis. We used scanning electron microscopy (SEM) and transmission electron microscopy (TEM) tests to study the morphology and particle size of the nanoparticles. According to the results, the copolymers synthesized with n-heptane have more porosity. Also an increase in the percentage of DVB caused finer pores. After synthesis of copolymer the applicability of these polymer beads to separation and concentration of Ni(II) is discussed. In separation of Ni(II) from aqueous solution, the effects of pH, temperature and time are discussed and thermodynamic and kinetic calculations are done and its isotherm are fitted with various equations.

  11. Separating the signal from the noise: Expanding flow cytometry into the sub-micron range.

    Science.gov (United States)

    Cytometry Part A Special Section: Separating the signal from the noise: Expanding flow cytometry into the sub-micron range. The current Cytometry Part A Special Section presents three studies that utilize cytometers to study sub-micron particles. The three studies involve the 1...

  12. Proton conductive membranes based on poly (styrene-co-allyl alcohol semi-IPN

    Directory of Open Access Journals (Sweden)

    Felipe Augusto Moro Loureiro

    2014-01-01

    Full Text Available The optimization of fuel cell materials, particularly polymer membranes, for PEMFC has driven the development of methods and alternatives to achieve systems with more adequate properties to this application. The sulfonation of poly (styrene-co-allyl alcohol (PSAA, using sulfonating agent:styrene ratios of 2:1, 1:1, 1:2, 1:4, 1:6, 1:8 and 1:10, was previously performed to obtain proton conductive polymer membranes. Most of those membranes exhibited solubility in water with increasing temperature and showed conductivity of approximately 10-5 S cm-1. In order to optimize the PSAA properties, especially decreasing its solubility, semi-IPN (SIPN membranes are proposed in the present study. These membranes were obtained from the diglycidyl ether of bisphenol A (DGEBA, curing reactions in presence of DDS (4,4-diaminodiphenyl sulfone and PSAA. Different DGEBA/PSAA weight ratios were employed, varying the PSAA concentration between 9 and 50% and keeping the mass ratio of DGEBA:DDS as 1:1. The samples were characterized by FTIR and by electrochemical impedance spectroscopy. Unperturbed bands of PSAA were observed in the FTIR spectra of membranes, suggesting that chemical integrity of the polymer is maintained during the synthesis. In particular, bands involving C-C stretching (1450 cm-1, C=C (aromatic, ~ 3030 cm-1 and C-H (2818 and 2928 cm-1 were observed, unchanged after the synthesis. The disappearance or reduction of the intensity of the band at 916 cm-1, attributed to the DGEBA epoxy ring, is evidenced for all samples, indicating the epoxy ring opening and the DGEBA crosslinking. Conductivity of H3PO4 doped membranes increases with temperature, reaching 10-4 S cm-1.

  13. Compatibility, Morphology, Mechanical Properties and Biodegradability of Poly(styrene-ethylene-propylenestyrene/ Modified Thermoplastic Starch Blends

    Directory of Open Access Journals (Sweden)

    Saaid Rahimi Bandarabadi

    2016-09-01

    Full Text Available The effect of modified starch on the properties of poly(styrene-ethylenepropylene- styrene tri-block copolymer was studied. Chemical treatment of starch with maleic anhydride was accomplished in an internal mixer in the presence of glycerol. The reaction was confirmed using Fourier infrared spectroscopy (FTIR and titration. The blend samples containing 10, 20, 30 and 50 wt% were obtained by melt blending and their mechanical, morphological and dynamic-mechanical properties were studied. Scanning electron microscopy (SEM images displayed droplet-matrix morphology and with increases in modified starch up to 50 wt% some partial co-continuous morphology was also observed. With increase of modified starch in the compound, the size of dispersed phase increased. DMTA results revealed that the partial compatibility was obtained because of slight difference between glass transition temperatures of two phases in the presence of modified starch. The peak of modified starch shifted to higher values and the differences between the two peaks decreased, indicating partial compatibility. Mechanical properties including tensile, elongation-at-break and modulus were also determined and the results showed that the mechanical properties of the sample were higher than those of neat TPS because of the higher compatibility. Tensile strength was decreased with increase in modified starch content due to the absence of strong interfacial adhesion. Moduli of the samples were increased with increase in modified starch content due to higher stiffness of starch. Biodegradability of the samples was evaluated by weight loss percentage using compost test. A rapid degradation was observed in the first 45 days and with increase of the modified starch content the degree of degradation was increased.

  14. The structure and dynamics of thin poly(styrene)-b-(polybutadiene) copolymer films studied by x-ray scattering

    Science.gov (United States)

    Song, Sanghoon; Byun, Youngsuk; Kim, Jeeun; Eom, Daeyong; Cha, Wonsuk; Kim, Hyunjung

    2007-03-01

    We have investigated the structure and dynamics of thin diblock copolymer films of poly(styrene)-b-poly(butadiene) using x-ray reflectivity, diffuse scattering, grazing incidence small angle scattering (GISAXS), and x-ray photon correlation spectroscopy (XPCS), respectively. The measurements were performed at temperatures below and above the order-disorder transition temperature (ODT) of bulk with different film thicknesses. The x-ray reflectivity and GISAXS results show that the structural changes appear at lower temperature than ODT of bulk. These results will be discussed with the findings from the XPCS.

  15. Liquid-liquid phase separation in dilute solutions of poly(styrene sulfonate) with multivalent cations: Phase diagrams, chain morphology, and impact of temperature.

    Science.gov (United States)

    Hansch, Markus; Hämisch, Benjamin; Schweins, Ralf; Prévost, Sylvain; Huber, Klaus

    2018-01-07

    The dilute solution behavior of sodium poly(styrene sulfonate) is studied in the presence of trivalent Al3+ and bivalent Ba2+ cations at various levels of excess NaCl. The study evaluates the phase behavior and the morphology of the polyelectrolyte chains with increasing extent of decoration with the Al3+ and Ba2+ cations and analyses the effect of temperature on these decorated chains. The phase behavior is presented in the form of the cation concentration versus the respective poly(styrene sulfonate) concentration, recorded at the onset of precipitation. Whereas poly(styrene sulfonate) with Al3+ exhibits a linear phase boundary, denoted as the "threshold line," which increases with increasing poly(styrene sulfonate) concentration, Ba2+ cations show a threshold line which is independent of the poly(styrene sulfonate) concentration. An additional re-entrant phase, at considerably higher cation content than those of the threshold lines, is observed with Al3+ cations but not with Ba2+ cations. The threshold line and the re-entrant phase boundary form parts of the liquid-liquid phase boundary observed at the limit of low polymer concentration. The dimensions of the polyelectrolyte chains shrink considerably while approaching the respective threshold lines on increase of the Al3+ and Ba2+ cation content. However, subtle differences occur between the morphological transformation induced by Al3+ and Ba2+. Most strikingly, coils decorated with Al3+ respond very differently to temperature variations than coils decorated with Ba2+ do. As the temperature increases, the poly(styrene sulfonate) chains decrease their size in the presence of Al3+ cations but increase in size in the presence of Ba2+ cations.

  16. Deciphering sub-micron ice particles on Enceladus surface

    Science.gov (United States)

    Scipioni, F.; Schenk, P.; Tosi, F.; D'Aversa, E.; Clark, R.; Combe, J.-Ph.; Ore, C. M. Dalle

    2017-07-01

    The surface of Saturn's moon Enceladus is composed primarily by pure water ice. The Cassini spacecraft has observed present-day geologic activity at the moon's South Polar Region, related with the formation and feeding of Saturn's E-ring. Plumes of micron-sized particles, composed of water ice and other non-ice contaminants (e.g., CO2, NH3, CH4), erupt from four terrain's fractures named Tiger Stripes. Some of this material falls back on Enceladus' surface to form deposits that extend to the North at ∼40°W and ∼220°W, with the highest concentration found at the South Pole. In this work we analyzed VIMS-IR data to identify plumes deposits across Enceladus' surface through the variation in band depth of the main water ice spectral features. To characterize the global variation of water ice band depths across Enceladus, the entire surface was sampled with an angular resolution of 1° in both latitude and longitude, and for each angular bin we averaged the value of all spectral indices as retrieved by VIMS. The position of the plumes' deposits predicted by theoretical models display a good match with water ice band depths' maps on the trailing hemisphere, whereas they diverge significantly on the leading side. Space weathering processes acting on Enceladus' surface ionize and break up water ice molecules, resulting in the formation of particles smaller than one micron. We also mapped the spectral indices for sub-micron particles and we compared the results with the plumes deposits models. Again, a satisfactory match is observed on the trailing hemisphere only. Finally, we investigated the variation of the depth of the water ice absorption bands as a function of the phase angle. In the visible range, some terrains surrounding the Tiger Stripes show a decrease in albedo when the phase angle is smaller than 10°. This unusual effect cannot be confirmed by near infrared data, since observations with a phase angle lower than 10° are not available. For phase angle

  17. Matrix-assisted laser desorption/ionization sample preparation optimization for structural characterization of poly(styrene-co-pentafluorostyrene) copolymers

    Energy Technology Data Exchange (ETDEWEB)

    Tisdale, Evgenia; Kennedy, Devin; Wilkins, Charles, E-mail: cwilkins@uark.edu

    2014-01-15

    Graphical abstract: -- Highlights: •We optimized sample preparation for MALDI TOF poly(styrene-copentafluorostyrene) co-polymers. •Influence of matrix choice was investigated. •Influence of matrix/analyte ratio was examined. •Influence of analyte/salt ratio (for Ag+ salt) was studied. -- Abstract: The influence of the sample preparation parameters (the choice of the matrix, matrix:analyte ratio, salt:analyte ratio) was investigated and optimal conditions were established for the MALDI time-of-flight mass spectrometry analysis of the poly(styrene-co-pentafluorostyrene) copolymers. These were synthesized by atom transfer radical polymerization. Use of 2,5-dihydroxybenzoic acid as matrix resulted in spectra with consistently high ion yields for all matrix:analyte:salt ratios tested. The optimized MALDI procedure was successfully applied to the characterization of three copolymers obtained by varying the conditions of polymerization reaction. It was possible to establish the nature of the end groups, calculate molecular weight distributions, and determine the individual length distributions for styrene and pentafluorostyrene monomers, contained in the resulting copolymers. Based on the data obtained, it was concluded that individual styrene chain length distributions are more sensitive to the change in the composition of the catalyst (the addition of small amount of CuBr{sub 2}) than is the pentafluorostyrene component distribution.

  18. Influence of Poly(styrene-co-maleic acid) Copolymer Structure on the Properties and Self-Assembly of SMALP Nanodiscs.

    Science.gov (United States)

    Hall, Stephen C L; Tognoloni, Cecilia; Price, Gareth J; Klumperman, Bert; Edler, Karen J; Dafforn, Tim R; Arnold, Thomas

    2018-01-16

    Polymer stabilized nanodiscs are self-assembled structures composed of a polymer belt that wraps around a segment of lipid bilayer, and as such are capable of encapsulating membrane proteins directly from the cell membrane. To date, most studies on these nanodiscs have used poly(styrene-co-maleic acid) (SMA) with the term SMA-lipid particles (SMALPs) coined to describe them. In this study, we have determined the physical and thermodynamic properties of such nanodiscs made with two different SMA copolymers. These include a widely used and commercially available statistical poly(styrene-co-maleic acid) copolymer (coSMA) and a reversible addition-fragmentation chain transfer synthesized copolymer with narrow molecular weight distribution and alternating styrene and maleic acid groups with a polystyrene tail, (altSMA). We define phase diagrams for each polymer, and show that, regardless of polymer topological structure, self-assembly is driven by the free energy change associated with the polymers. We also show that nanodisc size is polymer dependent, but can be modified by varying polymer concentration. The thermal stability of each nanodisc type is similar, and both can effectively solubilize proteins from the E. coli membrane. These data show the potential for the development of different SMA polymers with controllable properties to produce nanodiscs that can be optimized for specific applications and will enable more optimized and widespread use of the SMA-based nanodiscs in membrane protein research.

  19. Fire and Gas Barrier Properties of Poly(styrene-co-acrylonitrile Nanocomposites Using Polycaprolactone/Clay Nanohybrid Based-Masterbatch

    Directory of Open Access Journals (Sweden)

    S. Benali

    2008-01-01

    Full Text Available Exfoliated nanocomposites are prepared by dispersion of poly(ε-caprolactone (PCL grafted montmorillonite nanohybrids used as masterbatches in poly(styrene-co-acrylonitrile (SAN. The PCL-grafted clay nanohybrids with high inorganic content are synthesized by in situ intercalative ring-opening polymerization of ε-caprolactone between silicate layers organomodified by alkylammonium cations bearing two hydroxyl functions. The polymerization is initiated by tin alcoholate species derived from the exchange reaction of tin(II bis(2-ethylhexanoate with the hydroxyl groups borne by the ammonium cations that organomodified the clay. These highly filled PCL nanocomposites (25 wt% in inorganics are dispersed as masterbatches in commercial poly(styrene-co-acrylonitrile by melt blending. SAN-based nanocomposites containing 3 wt% of inorganics are accordingly prepared. The direct blend of SAN/organomodified clay is also prepared for sake of comparison. The clay dispersion is characterized by wide-angle X-ray diffraction (WAXD, atomic force microscopy (AFM, and solid state NMR spectroscopy measurements. The thermal properties are studied by thermogravimetric analysis. The flame retardancy and gas barrier resistance properties of nanocomposites are discussed both as a function of the clay dispersion and of the matrix/clay interaction.

  20. Analysis of recycled poly (styrene-co-butadiene) sulfonation: a new approach in solid catalysts for biodiesel production.

    Science.gov (United States)

    Aguilar-Garnica, Efrén; Paredes-Casillas, Mario; Herrera-Larrasilla, Tito E; Rodríguez-Palomera, Felicia; Ramírez-Arreola, Daniel E

    2013-01-01

    The disposal of solid waste is a serious problem worldwide that is made worse in developing countries due to inadequate planning and unsustainable solid waste management. In Mexico, only 2% of total urban solid waste is recycled. One non-recyclable material is poly (styrene-co-butadiene), which is commonly used in consumer products (like components of appliances and toys), in the automotive industry (in instrument panels) and in food services (e.g. hot and cold drinking cups and glasses). In this paper, a lab-scale strategy is proposed for recycling poly (styrene-co-butadiene) waste by sulfonation with fuming sulfuric acid. Tests of the sulfonation strategy were carried out at various reaction conditions. The results show that 75°C and 2.5 h are the operating conditions that maximize the sulfonation level expressed as number of acid sites. The modified resin is tested as a heterogeneous catalyst in the first step (known as esterification) of biodiesel production from a mixture containing tallow fat and canola oil with 59% of free fatty acids. The preliminary results show that esterification can reach 91% conversion in the presence of the sulfonated polymeric catalyst compared with 67% conversion when the reaction is performed without catalyst.

  1. Preparation, characterization, and antibacterial activity studies of silver-loaded poly(styrene-co-acrylic acid) nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Song, Cunfeng [Department of Materials Science and Engineering, College of Materials, Xiamen University, Xiamen 361005 (China); Department of Chemistry, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen 361005 (China); Chang, Ying; Cheng, Ling; Xu, Yiting [Department of Materials Science and Engineering, College of Materials, Xiamen University, Xiamen 361005 (China); Chen, Xiaoling, E-mail: tinachen0628@163.com [Department of Endodontics, Xiamen Stomatology Hospital, Teaching Hospital of Fujian Medical University, Xiamen 361003 (China); Zhang, Long; Zhong, Lina [Department of Materials Science and Engineering, College of Materials, Xiamen University, Xiamen 361005 (China); Dai, Lizong, E-mail: lzdai@xmu.edu.cn [Department of Materials Science and Engineering, College of Materials, Xiamen University, Xiamen 361005 (China)

    2014-03-01

    A simple method for preparing a new type of stable antibacterial agent was presented. Monodisperse poly(styrene-co-acrylic acid) (PSA) nanospheres, serving as matrices, were synthesized via soap-free emulsion polymerization. Field-emission scanning electron microscopy micrographs indicated that PSA nanospheres have interesting surface microstructures and well-controlled particle size distributions. Silver-loaded poly(styrene-co-acrylic acid) (PSA/Ag-NPs) nanocomposites were prepared in situ through interfacial reduction of silver nitrate with sodium borohydride, and further characterized by transmission electron microscopy and X-ray diffraction. Their effects on antibacterial activity including inhibition zone, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and bactericidal kinetics were evaluated. In the tests, PSA/Ag-NPs nanocomposites showed excellent antibacterial activity against both gram-positive Staphylococcus aureus and gram-negative Escherichia coli. These nanocomposites are considered to have potential application in antibacterial coatings on biomedical devices to reduce nosocomial infection rates. - Highlights: • A new type of antibacterial agent (PSA/Ag-NPs nanocomposites) was synthesized. • The antibacterial activity against S. aureus and E. coli was studied. • Inhibition zone, MIC, MBC, and bactericidal kinetics were evaluated. • PSA/Ag-NPs nanocomposites showed excellent antibacterial activity.

  2. Preparation and Structural Analysis of Nano-Silver Loaded Poly(styrene-co-acrylic acid) Core-Shell Nanospheres with Defined Shape and Composition.

    Science.gov (United States)

    Zhang, Jin; Zhao, Xiaoyu; Wang, Yanfei; Zhu, Liang; Yang, Libin; Li, Gang; Sha, Zuoliang

    2017-08-23

    A systematic study for the preparation and structural analysis of poly(styrene- co -acrylic acid) composite nanospheres (PSA) and silver nanoparticles loaded poly(styrene- co -acrylic acid) composite nanospheres (nAg@PSA) is reported. Poly(styrene- co -acrylic acid) nanospheres were synthesized by soap-free emulsion polymerization of styrene (St) and acrylic acid (AA) in water. Ag nanoparticles (Ag-NPs) were well-dispersed on the surfaces of poly(styrene- co -acrylic acid) composite nanospheres by in situ chemical reduction of AgNO₃ using NaBH₄ as a reducing agent in water. The particle size of PSA nanospheres was uniform. The surfaces of PSA nanospheres were distributed by highly uniform half-sphere arrays. Those half-sphere protruded more with the increase of the feeding amount of AA or the feed ratios of AA and St. The carboxyl groups content of nanospheres was directly proportional to the nanosphere surface area. This relationship and X-ray photoelectron spectroscopy and transmission electron microscopy images of the PSA nanospheres indicate that the acrylic acid was mainly distributed on the surface of the polystyrene spheres with unnegligible thickness. The number of Ag-NPs depends on immobilized carboxyl groups on the surface of PSA, according to thermogravimetry, ultraviolet-visible, X-ray diffraction and transmission electron microscopy results.

  3. Inner Stucture of Thin Films of Lamellar Poly(styrene-b-butadiene) Diblock Copolymers as revealed by Grazing-Incidence Small-Angle Scattering

    DEFF Research Database (Denmark)

    Busch, Peter; Posselt, Dorthe; Smilgies, Detlef-Matthias

    2007-01-01

    The lamellar orientation in supported, thin films of poly(styrene-b-butadiene) (P(S-b-B)) depends on block copolymer molar mass. We have studied films from nine block copolymer samples with molar masses between 13.9 and 183 kg/mol using grazing-incidence small-angle X-ray scattering (GISAXS) and ...

  4. PDMS-modified poly(styrene-alt-maleic anhydride)s as water-borne coatings based on surfactant-free latexes

    NARCIS (Netherlands)

    Gunbas, I.D.; Wouters, M.E.L.; Benthem, R.A.T.M. van; Koning, C.E.; Noordover, B.A.J.

    2013-01-01

    In this work, two series of PDMS-modified poly(styrene-alt-maleic anhydride)s (PSMA) were prepared by the partial imidization of their anhydride groups with mono-functional, amine-terminated polydimethyl siloxanes (PDMS-NH2) with two different molecular weights. Subsequently, surfactant-free

  5. A silicone rubber based composites using n-octadecane/poly (styrene-methyl methacrylate) microcapsules as energy storage particle

    Science.gov (United States)

    Wu, W. L.; Chen, Z.

    A phase-change energy-storage material, silicone rubber (SR) coated n-octadecane/poly (styrene-methyl methacrylate) (SR/OD/P(St-MMA)) microcapsule composites, was prepared by mixing SR and OD/P(St-MMA) microcapsules. The microcapsule content and silicone rubber coated method were investigated. The morphology and thermal properties of the composites were characterized by scanning electron microscopy (SEM), thermogravimetric analysis (TG), differential scanning calorimetry (DSC) and heat storage properties. The results showed that the thermal and mechanical properties of SR/OD/P(St-MMA) composites were excellent when the microcapsules were coated with room temperature vulcanized silicone rubber (RTVSR), of which content was 2 phr (per hundred rubber). The enthalpy value of the composites was 67.6 J g-1 and the composites were found to have good energy storage function.

  6. Preparation of graphene oxide/poly (3,4-ethylenedioxytriophene): Poly (styrene sulfonate) (PEDOT:PSS) electrospun nanofibers

    Energy Technology Data Exchange (ETDEWEB)

    Efelina, Vita; Widianto, Eri [Department of Physics, Universitas Gadjah Mada, Sekip Utara BLS.21 Yogyakarta, 55281 Indonesia (Indonesia); Rusdiana, Dadi [Department of Physical Education, Universitas Pendidikan Indonesia, Bandung (Indonesia); Nugroho, A. A. [Department of Physics, Institut Teknologi Bandung, Jl. Ganesha 10 Bandung (Indonesia); Kusumaatmaja, Ahmad; Triyana, Kuwat; Santoso, Iman, E-mail: iman.santoso@ugm.ac.id [Department of Physics, Universitas Gadjah Mada, Sekip Utara BLS.21 Yogyakarta, 55281 Indonesia (Indonesia); Nanomaterials Research Group, Universitas Gadjah Mada,, Sekip Utara, Yogyakarta (Indonesia)

    2016-04-19

    Graphene oxide (GO)/Poly (3,4-Ethylenedioxytriophene):Poly (styrene Sulfonate) (PEDOT:PSS) nanofibers have been successfully fabricated by a simple electrospinning technique to develop conductive nanofibers with polyvinyl alcohol (PVA) act as a carrier solution. Graphene oxide has been synthesized by Hummer’s method and has been confirmed by Raman Spectroscopy, FTIR and UV-Vis Spectroscopy. GO/PEDOT:PSS composite nanofibers. The structural and morphological properties were characterized by Scanning Electron Microscopy (SEM). The result of SEM show that GO/PEDOT:PSS nanofibers has a relatively uniform morphology nanofiber with diameter between 180 nm - 340 nm with smooth nanofiber surface. The produced nanofibers from this study can be utilized for various applications such as flexible, conductive and transparent electrode.

  7. Synthesis of hollow silver spheres using poly-(styrene-methyl acrylic acid) as templates in the presence of sodium polyacrylate

    Science.gov (United States)

    Wang, Aili; Yin, Hengbo; Ge, Chen; Ren, Min; Liu, Yumin; Jiang, Tingshun

    2010-02-01

    Hollow silver spheres were successfully prepared by reducing AgNO 3 with ascorbic acid and using negatively charged poly-(styrene-methyl acrylic acid) (PSA) spheres as templates in the presence of sodium polyacrylate as a stabilizer. Firstly, silver cations adsorbed on the surface of PSA spheres via electrostatic attraction between the carboxyl groups and silver cations were reduced in situ by ascorbic acid. The silver nanoparticles deposited on the surface of PSA spheres served as seeds for the further growth of silver shells. After that, extra amount of AgNO 3 and ascorbic acid solutions were added to form PSA/Ag composites with thick silver shells. In order to obtain compact silver shells, the as-prepared PSA/Ag composites were heated at 150 °C for 3 h. Then hollow silver spheres were prepared by dissolving PSA templates with tetrahydrofuran.

  8. Electrically conductive poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate)/polyacrylonitrile fabrics for humidity sensors

    Energy Technology Data Exchange (ETDEWEB)

    Panapoy, Manop; Singsang, Witawat; Ksapabutr, Bussarin, E-mail: mpanapoy@hotmail.co, E-mail: kbussarin@yahoo.co [Department of Materials Science and Engineering, Faculty of Engineering and Industrial Technology, Silpakorn University, Nakhon Pathom 73000 (Thailand)

    2010-05-01

    Humidity sensors based on poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate) (PEDOT-PSS)/polyacrylonitrile (PAN) nanofiber fabric were fabricated by a dip coating of nonwoven PAN nanofiber mat, which was prepared via an electrospinning method, in PEDOT-PSS solution. The influence of PAN solution concentration on their responsiveness to humidity on dynamic testing was monitored as the device was exposed to humidity. With the relative humidity (RH) changing from 0 to 100%, a resistance device response over 110% was achieved, and the curve of the resistance response with RH is of high linearity at the humidity working range of 0-100% RH. The high device reproducibility was demonstrated by carrying out vapor adsorption-desorption dynamic cycles, and the response and recovery times were determined to be of the order of 2-46 and 7-34 s, respectively. These hybrid polymer sensors can be used as disposable handheld instruments due to low cost and light weight.

  9. Superhydrophilic poly (styrene co acrylonitrile)-ZnO nanocomposite surfaces for UV shielding and self-cleaning applications

    Science.gov (United States)

    Singh, Rajender; Sharma, Ramesh; Barman, P. B.; Sharma, Dheeraj

    2017-11-01

    UV shielding based super hydrophilic material is developed in the present formulation by in situ emulsion polymerization of poly (styrene-acrylonitrile) with ZnO nanoparticles. The ESI-MS technique confirms the structure of polymer nanocomposite by their mass fragments. The XRD study confirms the presence of ZnO phase in polymer matrix. PSAN/ZnO nanocomposite leads to give effective UV shielding (upto 375 nm) and visible luminescence with ZnO content in polymer matrix. The FESEM and TEM studies confirm the symmetrical, controlled growth of PNs. The incorporation of ZnO nanofillers into PSAN matrix lead to restructuring the PNs surfaces into superhydrophilic surfaces in water contact angle (WCA) from 70° to 10°. We believe our synthesized PSAN/ZnO nanocomposite could be potential as UV shielding, luminescent and super hydrophilic nature based materials in related commercial applications.

  10. Grafting amino drugs to poly(styrene-alt-maleic anhydride) as a potential method for drug release

    Energy Technology Data Exchange (ETDEWEB)

    Khazaei, Ardeshir; Saednia, Shahnaz; Saien, Javad; Abbasi, Fatemeh, E-mail: Khazaei_1326@yahoo.com, E-mail: ssaednia@gmail.com [Faculty of Chemistry, Bu-Ali Sina University, Hamedan (Iran, Islamic Republic of); Kazem-Rostami, Masoud [Young Researchers Club and Elite, Takestan Branch, Islamic Azad University, Takestan (Iran, Islamic Republic of); Sadeghpour, Mahdieh [Department of Chemistry, Takestan Branch, Islamic Azad University, Takestan (Iran, Islamic Republic of); Borazjani, Maryam Kiani [Faculty of Science, Department of Chemistry, Bushehr Payame Noor University (PNU), Bushehr (Iran, Islamic Republic of)

    2013-07-15

    Drug delivery systems based on polymer-drug conjugates give an improved treatment with lower toxicity or side effects and be used for the treatment of different diseases. Conjugates of biodegradable poly(styrene-alt-maleic anhydride) (PSMA), with a therapeutic agents such as amantadine hydrochloride, amlodipine, gabapentin, zonisamide and mesalamine, were afforded by the formation of the amide bonds of the amino drugs that reacted with the PSMA anhydride groups. The amounts of covalently conjugated drugs were determined by a {sup 1}H NMR spectroscopic method, and the in vitro release rate in buffer solution (pH 1.3) was studied at body temperature 37 Degree-Sign C. In kinetic studies, different dissolution models were examined to obtain drug release data and the collected data were well-fitted to the Korsmeyer-Peppas equation, revealing a dominant Fickian diffusion mechanism for drug release under the in vitro conditions. (author)

  11. Penetration of sub-micron particles into dentinal tubules using ultrasonic cavitation.

    Science.gov (United States)

    Vyas, N; Sammons, R L; Pikramenou, Z; Palin, W M; Dehghani, H; Walmsley, A D

    2017-01-01

    Functionalised silica sub-micron particles are being investigated as a method of delivering antimicrobials and remineralisation agents into dentinal tubules. However, their methods of application are not optimised, resulting in shallow penetration and aggregation. The aim of this study is to investigate the impact of cavitation occurring around ultrasonic scalers for enhancing particle penetration into dentinal tubules. Dentine slices were prepared from premolar teeth. Silica sub-micron particles were prepared in water or acetone. Cavitation from an ultrasonic scaler (Satelec P5 Newtron, Acteon, France) was applied to dentine slices immersed inside the sub-micron particle solutions. Samples were imaged with scanning electron microscopy (SEM) to assess tubule occlusion and particle penetration. Qualitative observations of SEM images showed some tubule occlusion. The particles could penetrate inside the tubules up to 60μm when there was no cavitation and up to ∼180μm when there was cavitation. The cavitation bubbles produced from an ultrasonic scaler may be used to deliver sub-micron particles into dentine. This method has the potential to deliver such particles deeper into the dentinal tubules. Cavitation from a clinical ultrasonic scaler may enhance penetration of sub-micron particles into dentinal tubules. This can aid in the development of novel methods for delivering therapeutic clinical materials for hypersensitivity relief and treatment of dentinal caries. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Poly(styrene-co-divinylbenzene-co-2-ethylhexyl)acrilate membranes with interconnected macroporous structure: Poli(stiren-ko-divinilbenzen-ko-2-etilheksil)akrilatne membrane s povezano porozno strukturo:

    OpenAIRE

    Krajnc, Peter; Pulko, Irena; Seifried, Silvo; Sevšek, Urška; Stropnik, Črtomir

    2011-01-01

    A combination of doctor blading and emulsion templating was used to prepare macroporous poly(styrene-co-divinylbenzene-co-2-ethylhexylacrylate) and poly(styrene-co-divinylbenzene) membranes with an interconnected porous structure. Water in oil high internal phase emulsions including monomers in the oil phase were cast onto a glass plate and polymerised at elevated temperature. After purification porous polyHIPE membranes were obtained. The volume ratio of aqueous phase (75 % or 85 %) and the ...

  13. Magnetic and dielectric properties of sulfonated (S) poly[(styrene)-(ethylene-co-butylene)]-styrene (SEBS) block copolymer/magnetic metal oxide nanocomposites synthesized via an in-situ precipitation method

    Science.gov (United States)

    Peddini, Sateesh Kumar

    Block copolymer/magnetic metal oxide nanocomposites were synthesized by growing metal oxide nanoparticles (cobalt ferrite, CoFe2O 4 and iron oxide, alpha-Fe2O3) in sulfonated (s) poly (styrene) (PS) block domains of sulfonated poly [(styrene)-(ethylene-co-butylene)-(styrene)] (SEBS) BCP preformed films via an in-situ precipitation method by dissolving the salts of respective metal chloride (s) in a suitable solvent that selectively swells the sPS regions. Inorganic uptake was determined using thermogravimetric analysis (TGA), and it was observed that none of the samples incorporated more than 5 wt % of the inorganic component. Dynamical mechanical analysis was used to observe the changes in the glass transition temperatures (T g) in both blocks of the BCP by plotting tan delta vs. temperature responses in tensile mode on all samples. The results showed that the T g of the sPS block domains increased with sulfonation level and further increased with the incorporation of both nanoparticles in the same blocks, indicating that growth of nanoparticles takes place only in sPS blocks. The crystalline structure of the nanoparticles was observed using wide angle X-ray diffractometry (WAXD), and it was determined that cobalt iron oxide nanoparticles in 20 mole % sulfonated SEBS exhibited an inverse spinel structure confirming the structure to be CoFe2O4. And with iron oxide nanoparticles in 10 mole % sulfonated SEBS exhibiting a hematite (alpha-Fe2O 3) phase. Transmission electron microscopy (TEM) was used to investigate the particle size and distribution of nanoparticles in sBCP matrices at all sulfonation levels. Select area electron diffraction in TEM was used to determine crystalline structures of individual nanoparticles to compare with the structure observed from WAXD. The changes in thickness of interfaces between the individual PS and EB block domains with increase in sulfonation of PS blocks were investigated semi-quantitatively using tapping mode atomic force

  14. Poly(caprolactone)/clay masterbatches prepared in supercritical CO2 as efficient clay delamination promoters in poly(styrene-co-acrylonitrile)

    OpenAIRE

    Urbanczyk, Laetitia; Calberg, Cédric; Benali, Samira; Bourgibot, Serge; Espuche, Eliane; Gouanvé, Fabrice; Dubois, Philippe; Germain, Albert; Jérôme, Christine; Detrembleur, Christophe; Alexandre, Michaël

    2008-01-01

    Poly(styrene-co-acrylonitrile) (SAN)/clay nanocomposites with a high degree of clay exfoliation were prepared upon melt blending of pre-exfoliated poly(-caprolactone) (PCL)/organoclay masterbatches in a Brabender-type internal mixer. These highly filled masterbatches were synthesized by a one-pot process using supercritical carbon dioxide as a polymerization medium. During their dispersion into SAN, PCL is expected to act as a compatibilizer at the polymer–clay interface as it is miscible wit...

  15. Analysis and Design of Monolithic Inductors in Sub-micron CMOS

    DEFF Research Database (Denmark)

    Fallesen, Carsten; Jørgensen, Allan

    1997-01-01

    In the last few years the CMOS processes have gone into deep sub-micron channel lengths. This means that it is now possible to make GHz applications in CMOS. In analog GHz applications it is often necessary to have access to inductors. This report describes the development of a physical model of ...

  16. Preparation and drug-loading properties of Fe{sub 3}O{sub 4}/Poly(styrene-co-acrylic acid) magnetic polymer nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Wensheng [School of Chemistry and Chemical Engineering, Anhui University, Hefei 230039 (China); Coordination Chemistry Institute, School of Chemistry and Chemical Engineering and Life Science, Chaohu University, Chaohu 238000 (China); Shen, Yuhua, E-mail: s_yuhua@163.com [School of Chemistry and Chemical Engineering, Anhui University, Hefei 230039 (China); Xie, Anjian [School of Chemistry and Chemical Engineering, Anhui University, Hefei 230039 (China); Zhang, Weiqiang [School of Chemistry and Chemical Engineering, Anhui University, Hefei 230039 (China); Coordination Chemistry Institute, School of Chemistry and Chemical Engineering and Life Science, Chaohu University, Chaohu 238000 (China)

    2013-11-15

    Fe{sub 3}O{sub 4}/poly(styrene-co-acrylic acid) magnetic polymer nanocomposites were synthesized by the dispersion polymerization method using styrene as hard monomer, acrylic acid as functional monomer, Fe{sub 3}O{sub 4} nanoparticles modified with oleic acid as core, and poly(styrene-co-acrylic acid) as shell. Drug-loading properties of magnetic polymer nanocomposites with curcumin as a model drug were also studied. The results indicated that magnetic polymer nanocomposites with monodisperse were obtained, the particle size distribution was 50–120 nm, and the average size was about 100 nm. The contents of poly(styrene-co-acrylic acid) and Fe{sub 3}O{sub 4} nanoparticles in magnetic polymer nanocomposites were 74% and 24.7%, respectively. The drug-loading capacity and entrapment efficiency were 2.5% and 44.4%, respectively. The saturation magnetization of magnetic polymer nanocomposites at 300 K was 20.2 emu/g without coercivity and remanence. The as-prepared magnetic polymer nanocomposites have not only lots of functional carboxyl groups but also stronger magnetic response, which might have potential applications in drug carrier and targeted drug release.

  17. [Electrokinetic chromatographic properties of amphiphilic copolymer poly (styrene-co-methacrylic acid) self-assembled micelle pseudostationary phase].

    Science.gov (United States)

    Ma, Xinyu; Ni, Xinjiong; Lu, Jie; Xing, Xiaoping; Cao, Yuhua; Cao, Guangqun

    2015-04-01

    The amphiphilic copolymer poly (styrene-co-methacrylic acid) (P (St-co-MAA)) with molar ratios of 6:4 and 7:3 self-assembled to form micelles. The polymeric micelles were used as pseudostationary phase (PSP) in micellar electrokinetic chromatography ( MEKC). Their physicochemical properties and MEKC performance were investigated as well in the present work. The critical micelle concentration ( CMC) , polarity, surface charge density and hydrodynamic diameter were used to characterize the solution physicochemical properties, while the methylene group selectivity was evaluated with n-alkylphenone homologous series. The time window and linear solvation energy relationship (LSER) analysis were used to characterize the MEKC retention behavior and the selectivity. All of these were compared with poly (methyl methacrylate-co-methacrylic acid) (P (MMA-co-MAA)) with the molar ratio of 7:3 and sodium dodecyl sulfate (SDS) micellar systems. The results showed that P ( St-co-MAA) system had the minimum CMC, the widest time window and the best methylene group selectivity. LSER analysis results showed that the hydrophobic effect was the most important interaction between solutes and PSPs, and the hydrogen-bonding acidity was the second significant factor on selectivity and MEKC retention behavior. P (St-co-MAA) system, especially with the molar ratio of 7 :3, had the highest effective parameter in LSER and showed a high separation selectivity of PSP.

  18. Stepwise swelling of a thin film of lamellae-forming poly(styrene-b- butadiene) in cyclohexane vapor

    KAUST Repository

    Di, Zhenyu

    2012-06-26

    We investigated the swelling of a thin film of lamellae-forming poly(styrene-b-butadiene) in cyclohexane vapor. The vapor pressure and thus the degree of swelling of the film are increased in a stepwise manner using a custom-built sample cell. The resulting structural changes during and after each step were followed in situ using time-resolved grazing-incidence small-angle X-ray scattering (GISAXS). During the first step, the lamellar thickness increases strongly, before it decreases again. At the same time, the full width at half-maximum (FWHM) of the diffuse Bragg reflection along the film normal has a sharp maximum. These observations point to the formation of new lamellae. During the subsequent swelling steps, the lamellar thickness overshoots only weakly. The behavior thus resembles qualitatively our previous results on a similar thin film during swelling in saturated vapor of cyclohexane; however, it deviates from earlier theoretical predictions. We propose a theory that is quantitatively correct for the description of the dependence of the lamellar thickness on the polymer volume fraction in the late stage of the swelling steps. © 2012 American Chemical Society.

  19. A silicone rubber based composites using n-octadecane/poly (styrene-methyl methacrylate microcapsules as energy storage particle

    Directory of Open Access Journals (Sweden)

    W.L. Wu

    Full Text Available A phase-change energy-storage material, silicone rubber (SR coated n-octadecane/poly (styrene-methyl methacrylate (SR/OD/P(St-MMA microcapsule composites, was prepared by mixing SR and OD/P(St-MMA microcapsules. The microcapsule content and silicone rubber coated method were investigated. The morphology and thermal properties of the composites were characterized by scanning electron microscopy (SEM, thermogravimetric analysis (TG, differential scanning calorimetry (DSC and heat storage properties. The results showed that the thermal and mechanical properties of SR/OD/P(St-MMA composites were excellent when the microcapsules were coated with room temperature vulcanized silicone rubber (RTVSR, of which content was 2 phr (per hundred rubber. The enthalpy value of the composites was 67.6 J g−1 and the composites were found to have good energy storage function. Keywords: n-Octadecane, Silicone rubber, Microcapsule, Energy-storage, Composites

  20. Preparation and Effect of Gamma Radiation on The Properties and Biodegradability of Poly(Styrene/Starch) Blends

    Science.gov (United States)

    Ali, H. E.; Abdel Ghaffar, A. M.

    2017-01-01

    Biodegradable blends based on Poly(styrene/starch) Poly(Sty/Starch) were prepared by the casting method using different contents of starch in the range of 0-20 wt% aiming at preparing disposable packaging materials. The prepared bio-blends were Characterized by Fourier transform infrared (FTIR), swelling behavior, mechanical properties, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). It was found that the swelling behavior slightly increased with increasing starch content and not exceeding 7.5%. The results showed that by increasing irradiation dose up to 5 kGy, the mechanical properties of the prepared PSty/10 wt% Starch blend film modified than other blend films, and hence it is selected. Also the water resistant increased, by irradiation of the selected PSty/10 wt% Starch blend film. The intermolecular hydrogen bonding interaction between Starch and PSty of the PSty/10 wt% Starch blend film promote a more homogenous blend film as shown in scanning electron microscopy (SEM). The prepared Poly(Sty/Starch) blends with different compositions and the selected irradiated PSty/10 wt% Starch blend were subjected to biodegradation in soil burial tests for 6 months using two different types of soils; agricultural and desert soils, then analyzed gravimetrically and by scanning electron microscopy (SEM). The results suggested that there is a possibility of using irradiated PSty/10 wt% Starch at a dose of 5 kGy as a potential candidate for packaging material.

  1. Transparent Wood Smart Windows: Polymer Electrochromic Devices Based on Poly(3,4-Ethylenedioxythiophene):Poly(Styrene Sulfonate) Electrodes.

    Science.gov (United States)

    Lang, Augustus W; Li, Yuanyuan; De Keersmaecker, Michel; Shen, D Eric; Österholm, Anna M; Berglund, Lars; Reynolds, John R

    2018-02-01

    Transparent wood composites, with their high strength and toughness, thermal insulation, and excellent transmissivity, offer a route to replace glass for diffusely transmitting windows. Here, conjugated-polymer-based electrochromic devices (ECDs) that switch on-demand are demonstrated using transparent wood coated with poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) as a transparent conducting electrode. These ECDs exhibit a vibrant magenta-to-clear color change that results from a remarkably colorless bleached state. Furthermore, they require low energy and power inputs of 3 mWh m-2 at 2 W m-2 to switch due to a high coloration efficiency (590 cm2  C-1 ) and low driving voltage (0.8 V). Each device component is processed with high-throughput methods, which highlights the opportunity to apply this approach to fabricate mechanically robust, energy-efficient smart windows on a large scale. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Sub-micron-sized delafossite CuCrO2 with different morphologies ...

    Indian Academy of Sciences (India)

    40, No. 1, February 2017, pp. 195–199. c Indian Academy of Sciences. DOI 10.1007/s12034-016-1340-6. Sub-micron-sized delafossite CuCrO2 with different morphologies synthesized by nitrate–citric acid sol–gel route. SATISH BOLLOJU1 and RADHAKRISHNAN SRINIVASAN1,2,∗. 1Department of Chemistry, BITS Pilani ...

  3. Directed assembly of conducting polymers on sub-micron templates by electrical fields

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Jia; Wei, Ming [National Science Foundation (NSF) Nanoscale Science and Engineering Center for High-Rate Nanomanufacturing, University of Massachusetts Lowell, Lowell, MA 01854 (United States); Busnaina, Ahmed [National Science Foundation (NSF) Nanoscale Science and Engineering Center for High-Rate Nanomanufacturing, Northeastern University, Boston, MA 02115 (United States); Barry, Carol [National Science Foundation (NSF) Nanoscale Science and Engineering Center for High-Rate Nanomanufacturing, University of Massachusetts Lowell, Lowell, MA 01854 (United States); Mead, Joey, E-mail: Joey_Mead@uml.edu [National Science Foundation (NSF) Nanoscale Science and Engineering Center for High-Rate Nanomanufacturing, University of Massachusetts Lowell, Lowell, MA 01854 (United States)

    2013-02-20

    Highlights: Black-Right-Pointing-Pointer Nanoscale patterns with dimensions of assembled PANi down to 100 nm were fabricated. Black-Right-Pointing-Pointer We use electrophoretic and dielectrophoretic assembly to deposit PANi. Black-Right-Pointing-Pointer Electrophoretic and dielectrophoretic assembly of PANi finished in less than 1 min. Black-Right-Pointing-Pointer Effect of process parameters on assembly of PANi onto nanoscale pattern was studied. Black-Right-Pointing-Pointer The assembled PANi can be transferred to other flexible substrates. - Abstract: Patterning of conducting polymer into sub-micron patterns over large areas at high rate and low cost is significant for commercial manufacturing of novel devices. Electrophoretic and dielectrophoretic assembly provide an easily scaled approach with high fabrication rates. In this work, electrophoretic and dielectrophoretic assembly were used to assemble polyaniline (PANi) into multiscale sub-micron size patterns in less than 1 min. The process was controlled by assembly time, amplitude, and frequency of the electric field. Dielectrophoretic assembly is preferable for manufacturing as it reduces damage to the templates used to control the assembly. Using this method, sub-micron patterns with dimensions of the assembled PANi down to 100 nm were fabricated over large areas in short times. The assembled PANi was further transferred to other flexible polymer substrates by a thermoforming process, providing a fast, easily controlled and promising approach for fabrication of nanoscale devices.

  4. Removal of Copper ions from aqueous solutions using polymer derivations of poly (styrene-alt-maleic anhydride

    Directory of Open Access Journals (Sweden)

    Naser Samadi

    2017-06-01

    Full Text Available In this study chelating resins have been considered to be suitable materials for the recovery of Copper (II ions in water treatments. Furthermore, these modified resins were reacted with 1,2-diaminoethane in the presence of ultrasonic irradiation for the preparation of a tridimensional chelating resin on the Nano scale for the recovery of Copper (II ions from aqueous solutions. This method which is used for removing and determining Copper (II ions using copolymers derived resins of poly (styrene-alternative-maleic anhydride (SMA and atomic absorption spectroscopy. The method is simple, sensitive, inexpensive and fast. The various parameters such as pH, contact time, concentrations of metal ions, mass of resin, and agitation speed were investigated on adsorption effect. The adsorption behavior of Copper (II ions were investigated by the synthesis of chelating resins at various pHs. The prepared resins showed a good tendency for removing the selected metal ions from aqueous solution, even at an acidic pH. Also, the prepared resins were examined for the removal of Copper (II ions from real samples such as industrial wastewater and were shown to be very efficient at adsorption in the cases of Copper (II ions. The pseudo-first-order, pseudo-second-order, and intra-particle diffusion kinetics equations were used for modeling of adsorption data and it was shown that pseudo-second-order kinetic equation could best describe the adsorption kinetics. The intra-particle diffusion study revealed that external diffusion might be involved in this case. The resins were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction analysis.

  5. The influence of mechanical properties in the electrical breakdown in poly-styrene-ethylene-butadiene-styrene thermoplastic elastomer

    Science.gov (United States)

    Kollosche, Matthias; Melzer, Michael; Becker, Andre; Stoyanov, Hristian; McCarthy, Denis N.; Ragusch, Hülya; Kofod, Guggi

    2009-03-01

    Dielectric elastomer actuators (DEA) are a class of eletro-active polymers with promising properties for a number of applications, however, such actuators are prone to failure. One of the leading failure mechanisms is the electrical breakdown. It is already well-known that the electro-mechanical actuation properties of DEA are strongly influenced by the mechanical properties of the elastomer and compliant electrodes. It was recently suggested that also the electrical breakdown in such soft materials is influenced by the mechanical properties of the elastomer. Here, we present stress-strain measurements obtained on two tri-block thermoplastic elastomers (SEBS 500040 and SEBS 500120, poly-styrene-ethylene-butadiene-styrene), with resulting large differences in mechanical properties, and compare them to measurements on the commonly used VHB 4910. Materials were prepared by either direct heat-pressing of the raw material, or by dissolving in toluene, centrifuging and drop-casting. Experiments showed that materials prepared with identical processing steps showed a difference in stiffness of about 20%, where centrifuged and drop-casted films were seen to be softer than heat-pressed films. Electric breakdown measurements showed that for identically processed materials, the stiffness seemed to be a strong indicator of the electrical breakdown strength. It was therefore found that processing leads to differences in both stiffness and electrical breakdown strength. However, unexpectedly, the softer drop-cast films had a much higher breakdown strength than the heatpressed films. We attribute this effect to impurities still present in the heat-pressed films, since these were not purified by centrifuging.

  6. Preparation of Fe3O4-Embedded Poly(styrene)/Poly(thiophene) Core/Shell Nanoparticles and Their Hydrogel Patterns for Sensor Applications

    OpenAIRE

    Kim, Yong; Lee, Hyun; Govindaiah, Patakamuri; Son, Woohyun; Koh, Won-Gun; Cheong, In; Kim, Jung

    2014-01-01

    This research describes the preparation and sensor applications of multifunctional monodisperse, Fe3O4 nanoparticles-embedded poly(styrene)/poly(thiophene) (Fe3O4-PSt/PTh), core/shell nanoparticles. Monodisperse Fe3O4-PSt/PTh nanoparticles were prepared by free-radical combination (mini-emulsion/emulsion) polymerization for Fe3O4-PSt core and oxidative seeded emulsion polymerization for PTh shell in the presence of FeCl3/H2O2 as a redox catalyst, respectively. For applicability of Fe3O4-PSt...

  7. Low Work-function Poly(3,4-ethylenedioxylenethiophene): Poly(styrene sulfonate) as Electron-transport Layer for High-efficient and Stable Polymer Solar Cells

    OpenAIRE

    Yong Zhang; Lie Chen; Xiaotian Hu; Lin Zhang,; Yiwang Chen

    2015-01-01

    Low-work-function poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) modified with polyethylenimine (PEIE) was used as an electron transport layer (ETL) for polymer solar cells (PSCs). A thin layer of PEIE film was spin-coated onto the surface on the PEDOT:PSS films, thus substantially changing their charge selectivity from supporting hole transport to supporting electron transport. It was also found that the PEDOT:PSS/PEIE ETL exhibited higher interfacial contact, a more fa...

  8. Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) elastomer via photo-initiated graft polymerization of poly(ethylene glycol)

    Energy Technology Data Exchange (ETDEWEB)

    Li Xiaomeng [State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China); Luan Shifang, E-mail: sfluan@ciac.jl.cn [State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China); Yang Huawei; Shi Hengchong; Zhao Jie; Jin Jing [State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China); Yin Jinghua, E-mail: yinjh@ciac.jl.cn [State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China); Stagnaro, Paola [Istituto per Io Studio delle Macromolecole, Consiglio Nazionale delle Ricerche, Via de Marini 6, 16149 Genova (Italy)

    2012-01-15

    Poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) copolymer biomedical elastomer was covalently grafted with poly(ethylene glycol) methyl ether methacrylate (PEGMA) via a photo-initiated graft polymerization technique. The surface graft polymerization of SEBS with PEGMA was verified by ATR-FTIR and XPS. Effect of graft polymerization parameters, i.e., monomer concentration, UV irradiation time and initiator concentration on the grafting density was investigated. Comparing with the virgin SEBS film, the PEGMA-modified SEBS film presented an enhanced wettability and a larger surface energy. Besides, the surface grafting of PEGMA imparted excellent anti-platelet adhesion and anti-protein adsorption to the SEBS surface.

  9. Sub-micron Cu/SSZ-13: Synthesis and application as selective catalytic reduction (SCR) catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Prodinger, Sebastian; Derewinski, Miroslaw A.; Wang, Yilin; Washton, Nancy M.; Walter, Eric D.; Szanyi, János; Gao, Feng; Wang, Yong; Peden, Charles H. F.

    2017-02-01

    For the first time, sub-micron Cu/SSZ-13, obtained by modifying an existing synthesis procedure, was shown to be an effective and stable catalyst for selective catalytic reduction reactions, such as NO reduction. Characterization of the materials with X-ray diffraction, N2-physisorption and 27Al MAS NMR shows that hydrothermal aging, simulating SCR reaction conditions, is more destructive in respect to dealumination for smaller particles prior to Cu-exchange. However, the catalytic performance and hydrothermal stability for Cu/SSZ-13 is independent of the particle size. In particular, the stability of tetrahedral framework Al is improved in the sub-micron Cu/SSZ-13 catalysts of comparable Cu loading. This indicates that variations in the Al distribution for different SSZ-13 synthesis procedures have a more critical influence on stabilizing isolated Cu-ions during harsh hydrothermal aging than the particle size. This study is of high interest for applications in vehicular DeNOx technologies where high loadings of active species on wash coats can be achieved by using sub-micron Cu/SSZ-13. The authors would like to thank B. W. Arey and J. J. Ditto for performing electron microscope imaging. The authors gratefully acknowledge the US Department of Energy (DOE), Energy Efficiency and Renewable Energy, Vehicle Technologies Office for the support of this work. S. P and M. A. D also acknowledge support by the Materials Synthesis and Simulation Across Scales (MS3 Initiative) conducted under the Laboratory Directed Research & Development Program at PNNL. The research described in this paper was performed in the Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated for the US DOE by Battelle.

  10. Poly(styrene-divinylbenzene) beads surface functionalized with di-block polymer grafting and multi-modal ligand attachment: performance of reversibly immobilized lipase in ester synthesis.

    Science.gov (United States)

    Bayramoglu, Gulay; Karagoz, Bunyamin; Altintas, Begum; Arica, M Yakup; Bicak, Niyazi

    2011-08-01

    Fibrous poly(styrene-b-glycidylmethacrylate) brushes were grafted on poly(styrene-divinylbenzene) (P(S-DVB)) beads using surface-initiated atom transfer radical polymerization. Tetraethyldiethylenetriamine (TEDETA) ligand was incorporated on P(GMA) block. The ligand attached beads were used for reversible immobilization of lipase. The influences of pH, ionic strength, and initial lipase concentration on the immobilization capacities of the beads have been investigated. Lipase adsorption capacity of the beads was about 78.1 mg/g beads at pH 6.0. The Km value for immobilized lipase was about 2.1-fold higher than that of free enzyme. The thermal, and storage stability of the immobilized lipase also was increased compared to the native lipase. It was observed that the same support enzyme could be repeatedly used for immobilization of lipase after regeneration without significant loss in adsorption capacity or enzyme activity. A lipase from Mucor miehei immobilized on styrene-divinylbenzene copolymer was used to catalyze the direct esterification of butyl alcohol and butyric acid.

  11. Unexpected differences between thermal and photoinitiated cationic curing of a diglycidyl ether of bisphenol A modified with a multiarm star poly(styrene-b-poly(ε-caprolactone polymer

    Directory of Open Access Journals (Sweden)

    J. M. Morancho

    2013-07-01

    Full Text Available The effect of adding a multiarm star poly(styrene-b-poly(ε-caprolactone polymer on the cationic thermal and photoinitiated curing of diglycidyl ether of bisphenol A was studied. This star-polymer decelerated the thermal curing of diglycidyl ether of bisphenol A and modified the final structure of the epoxy matrix. The photocuring was influenced significantly by the addition of the multiarm star. When the proportion of this modifier added was 5%, much more time was necessary for complete photocuring (160 min at 40ºC. In the presence of 10% of modifier, the degree of photocuring reached was very low (0.196 at 120°C. A subsequent thermal post-curing was necessary to cure completely the system. During photocuring in presence of poly(styrene-b-poly(ε-caprolactone, the formation of dormant species, which are reactivated when the temperature increases, takes places. The kinetics of the thermal curing and the photocuring was analyzed using an isoconversional method due to the complexity of the reactive process. Applying this method, it has been confirmed the dependence of activation energy on the degree of conversion. The fracture morphology analyzed by scanning electron microscopy exhibited a second phase originated during photocuring by the presence of the modifier.

  12. Complexation of AB+, AB+C, ACB+, and A(B+-stat-C) block copolymer micelles with poly(styrene sulfonate) as models for tunable gene delivery vectors

    Science.gov (United States)

    Laaser, Jennifer; Jiang, Yaming; Lohmann, Elise; Reineke, Theresa; Lodge, Timothy

    We investigate the complexation of poly(styrene sulfonate) with micelles with mixed cationic/hydrophilic coronas as models for tunable gene delivery vectors. The micelles are self-assembled from AB+, AB+C, ACB+, and A(B+-stat-C) block polymer architectures, where the hydrophobic A blocks (poly(styrene)) form the micelle cores, and the cationic B blocks (poly(dimethylamino ethyl methacrylate)) and hydrophilic, nonionic C blocks (poly(poly(ethylene glycol) methyl ether methacrylate)) form the coronas. We find that hydrophilic units do not change the colloidal stability of the complexes, and complexes based on all four micelle architectures form broad, multimodal size distributions. While complexes based on the AB+, AB+C, and ACB+polymer architectures are kinetically trapped at low ionic strength, however, those based on the A(B+-stat-C) architecture rapidly rearrange into single-micelle complexes when the linear polyanion is in excess. This suggests that the randomly-placed hydrophilic units break up the ion pairing between the cationic and anionic chains and promote formation of over-charged complexes. Design of the micelle architecture may thus provide a powerful way control the structure and stability of micelle-polyelectrolyte complexes for gene delivery applications.

  13. Laser smoothing of sub-micron grooves in hydroxyl-rich fused silica

    Energy Technology Data Exchange (ETDEWEB)

    Shen Nan [Lawrence Livermore National Laboratory, 7000 East Avenue, L-491, Livermore, CA 94550-9234 (United States); Matthews, Manyalibo J., E-mail: ibo@llnl.gov [Lawrence Livermore National Laboratory, 7000 East Avenue, L-491, Livermore, CA 94550-9234 (United States); Fair, James E.; Britten, Jerald A.; Nguyen, Hoang T.; Cooke, Diane; Elhadj, Selim; Yang, Steven T. [Lawrence Livermore National Laboratory, 7000 East Avenue, L-491, Livermore, CA 94550-9234 (United States)

    2010-04-01

    Nano- to micrometer-sized surface defects on UV-grade fused silica surfaces are known to be effectively smoothed through the use of high-temperature localized CO{sub 2} laser heating, thereby enhancing optical properties. However, the details of the mass transport and the effect of hydroxyl content on the laser smoothing of defective silica at sub-micron length scales are still not completely understood. In this study, we examine the morphological evolution of sub-micron, dry-etched periodic surface structures on type II and type III SiO{sub 2} substrates under 10.6 {mu}m CO{sub 2} laser irradiation using atomic force microscopy (AFM). In situ thermal imaging was used to map the transient temperature field across the heated region, allowing assessment of the T-dependent mass transport mechanisms under different laser-heating conditions. Computational fluid dynamics simulations correlated well with experimental results, and showed that for large effective capillary numbers (N{sub c} > 2), surface diffusion is negligible and smoothing is dictated by capillary action, despite the relatively small spatial scales studied here. Extracted viscosity values over 1700-2000 K were higher than the predicted bulk values, but were consistent with the surface depletion of OH groups, which was confirmed using confocal Raman microscopy.

  14. Deformation Behavior of Sub-micron and Micron Sized Alumina Particles in Compression.

    Energy Technology Data Exchange (ETDEWEB)

    Sarobol, Pylin; Chandross, Michael E.; Carroll, Jay; Mook, William; Boyce, Brad; Kotula, Paul Gabriel; McKenzie, Bonnie Beth; Bufford, Daniel Charles; Hall, Aaron Christopher.

    2014-09-01

    The ability to integrate ceramics with other materials has been limited due to high temperature (>800degC) ceramic processing. Recently, researchers demonstrated a novel process , aerosol deposition (AD), to fabricate ceramic films at room temperature (RT). In this process, sub - micro n sized ceramic particles are accelerated by pressurized gas, impacted on the substrate, plastically deformed, and form a dense film under vacuum. This AD process eliminates high temperature processing thereby enabling new coatings and device integration, in which ceramics can be deposited on metals, plastics, and glass. However, k nowledge in fundamental mechanisms for ceramic particle s to deform and form a dense ceramic film is still needed and is essential in advancing this novel RT technology. In this wo rk, a combination of experimentation and atomistic simulation was used to determine the deformation behavior of sub - micron sized ceramic particle s ; this is the first fundamental step needed to explain coating formation in the AD process . High purity, singl e crystal, alpha alumina particles with nominal size s of 0.3 um and 3.0 um were examined. Particle characterization, using transmission electron microscopy (TEM ), showed that the 0.3 u m particles were relatively defect - free single crystals whereas 3.0 u m p articles were highly defective single crystals or particles contained low angle grain boundaries. Sub - micron sized Al 2 O 3 particles exhibited ductile failure in compression. In situ compression experiments showed 0.3um particles deformed plastically, fractured, and became polycrystalline. Moreover, dislocation activit y was observed within the se particles during compression . These sub - micron sized Al 2 O 3 particles exhibited large accum ulated strain (2 - 3 times those of micron - sized particles) before first fracture. I n agreement with the findings from experimentation , a tomistic simulation s of nano - Al 2 O 3 particles showed dislocation slip and

  15. The surface characterisation and comparison of two potential sub-micron, sugar bulking excipients for use in low-dose, suspension formulations in metered dose inhalers.

    Science.gov (United States)

    James, Jeff; Crean, Barry; Davies, Martyn; Toon, Richard; Jinks, Phil; Roberts, Clive J

    2008-09-01

    This study compares the surface characteristics and surface energetics of two potential bulking excipients, anhydrous sub-micron alpha-lactose and sub-micron sucrose, for use with low-dose, suspension formulations in pressurised metered dose inhalers (pMDIs). Both sub-micron bulking excipients are processed from parent materials (alpha-lactose monohydrate/alpha-lactose monohydrate and silk grade sucrose, respectively) so the surface characteristics of each material were determined and compared. Additionally, the surface energetics and adhesive interactions between each sub-micron bulking excipient and some chosen active pharmaceutical ingredients (APIs) used in pMDI formulations were also determined. From this data, it was possible to predict the potential degree of interaction between the APIs and each sub-micron bulking excipient, thus determining suitable API-excipient combinations for pMDI formulation optimisation. Salmon calcitonin was also investigated as a potential API due to the current interest in, and the potential low-dose requirements for, the pulmonary delivery of proteins. The size and morphology of each sub-micron excipient (and parent materials) were determined using scanning electron microscopy (SEM) and the crystalline nature of each sub-micron excipient and parent material was assessed using X-ray diffraction (XRD). The surface chemistry of each sub-micron excipient was analysed using X-ray photoelectron spectroscopy (XPS). The surface energies of each sub-micron excipient, along with their respective parent materials and any intermediates, were determined using two techniques. The surface energies of these materials were determined via (a) single particle adhesive interactions using atomic force microscopy (AFM) and (b) 'bulk' material surface interactions using contact angle measurements (CA). From the CA data, it was possible to calculate the theoretical work of adhesion values for each API-excipient interaction using the surface component

  16. The fabrication of integrated carbon pipes with sub-micron diameters

    Science.gov (United States)

    Kim, B. M.; Murray, T.; Bau, H. H.

    2005-08-01

    A method for fabricating integrated carbon pipes (nanopipettes) of sub-micron diameters and tens of microns in length is demonstrated. The carbon pipes are formed from a template consisting of the tip of a pulled alumino-silicate glass capillary coated with carbon deposited from a vapour phase. This method renders carbon nanopipettes without the need for ex situ assembly and facilitates parallel production of multiple carbon-pipe devices. An electric-field-driven transfer of ions in a KCl solution through the integrated carbon pipes exhibits nonlinear current-voltage (I-V) curves, markedly different from the Ohmic I-V curves observed in glass pipettes under similar conditions. The filling of the nanopipette with fluorescent suspension is also demonstrated.

  17. Synthesis and characterization of novel polymer-drug conjugates based on the poly(styrene-alt-maleic anhydride) as a potential method for drug release.

    Science.gov (United States)

    Khazaei, Ardeshir; Saednia, Shahnaz; Saien, Javad; Borazjani, Maryam Kiani; Rahmati, Sadegh; Hashempour-Zaviye, Ali; Abbasi, Fatemeh

    2013-01-01

    Six well known drugs, captopril, metformin-HCl, metroniazole, nortriptyline-HCl, fluoxetine-HCl and betahistin-HCl, were grafted to poly(styrene-alt-maleic anhydride) (PSMA). Grafting was attained by combining of anhydride groups in the PSMA with therapeutic agents containing NH, OH or SH groups. The covalently grafted drugs were identified by infrared, (1)H NMR and UV-Vis spectroscopy. The drug release data at different times fits well to the Korsmeyer-Peppas equation. The analysis of the exponent n of this model revealed a dominant Fickian diffusion mechanism under the in vitro conditions. Furthermore, mean dissolution time values (45.9 to 86.7 h) indicate a high resistance against drugs transport, the highest being obtained for betahistin-HCL.

  18. The improvement of corrosion resistance of fluoropolymer coatings by SiO{sub 2}/poly(styrene-co-butyl acrylate) nanocomposite particles

    Energy Technology Data Exchange (ETDEWEB)

    Chen, L. [School of Materials Science and Engineering, Changzhou University, Changzhou 213164 (China); Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Changzhou 213164 (China); Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Changzhou University, Changzhou 213164, Jiangsu (China); Song, R.G., E-mail: songrg@hotmail.com [School of Materials Science and Engineering, Changzhou University, Changzhou 213164 (China); Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Changzhou 213164 (China); Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Changzhou University, Changzhou 213164, Jiangsu (China); Li, X.W.; Guo, Y.Q.; Wang, C.; Jiang, Y. [School of Materials Science and Engineering, Changzhou University, Changzhou 213164 (China); Jiangsu Key Laboratory of Materials Surface Science and Technology, Changzhou University, Changzhou 213164 (China); Jiangsu Collaborative Innovation Center of Photovolatic Science and Engineering, Changzhou University, Changzhou 213164, Jiangsu (China)

    2015-10-30

    Highlights: • We first proposed the feasibility of organic-inorganic hybrid particles can be used to reduce free space of the fluoropolymer coatings. • By grafting poly(styrene-co-butyl acrylate), nano-silica particles can be better dispersed in the fluoropolymer coatings system. • The coating-substrates bound strength could be obviously seen in the FESEM cross-section images. • The effects of the corrosion resistance of fluoropolymer-coated steel were investigated by potentiodynamic polarization and EIS. • Using models to analysis the anticorrosion mechanism of nanocomposite coatings. - Abstract: The effects of nano-silica particles on the anticorrosion properties of fluoropolymer coatings on mild steel have been investigated in this paper. In order to enhance the dispersibility of nano-silica in fluoropolymer coatings, we treated the surface of nano-silica with poly(styrene-co-butyl acrylate) (P(St-BA)). The surface grafting of P(St-BA) on the nanoparticles were detected using Fourier transform infrared spectroscopy (FT-IR), thermo gravimetric analyzer (TGA), field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM). The surface of nanocomposite coatings and the coating-substrates bond texture were detected by FE-SEM. We also used energy-dispersive X-ray spectroscopy (EDS) to analyze whether the nanocomposite particles were added into the fluoropolymer coatings. In addition, the influences of various nanoparticles on the corrosion resistance of fluoropolymer-coated steel were investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The results shown that nanocomposite particles can be dispersed better in fluoropolymer coatings, and the electrochemical results clearly shown the improvement of the protective properties of the nanocomposite coatings when 4 wt.% SiO{sub 2}/P(St-BA) was added to the fluoropolymer coatings.

  19. Impact of modified graphene and microwave irradiation on thermal stability and degradation mechanism of poly (styrene-co-methyl meth acrylate)

    Energy Technology Data Exchange (ETDEWEB)

    Zubair, Mukarram [Department of Environmental Engineering, University of Dammam, 31982 Dammam (Saudi Arabia); Shehzad, Farrukh [Department of Chemical Engineering, King Fahd University of Petroleum & Minerals, 31261 Dhahran, Saudi Arabia, (Saudi Arabia); Al-Harthi, Mamdouh A., E-mail: mamdouh@kfupm.edu.sa [Department of Chemical Engineering, King Fahd University of Petroleum & Minerals, 31261 Dhahran, Saudi Arabia, (Saudi Arabia); Center of Research Excellence in Nanotechnology, King Fahd University of Petroleum & Minerals, 31261 Dhahran (Saudi Arabia)

    2016-06-10

    Highlights: • Modified graphene imparts thermal stability to Poly (styrene-co-methyl methacrylate) [P(st-mma)]. • The thermal stability of P(st-mma) decreased with microwave irradiation. • The thermal stability of P(st-mma)/MG nanocomposites increased with irradiation time up to 10 min and decreased subsequently. • The degradation of P(st-mma) and P(st-mma)/MG is governed by random scission model. - Abstract: Poly (styrene-co-methyl methacrylate) [P(st-mma)] composite containing 0.1 wt% modified graphene (MG) was prepared via melt blending. MG was prepared by oxidation method using nitric acid. The P(st-mma) and P(st-mma)MG composite were irradiated using microwave radiation. The degradation mechanism and thermal stability of the irradiated and un-irradiated samples was analyzed by TGA. P(st-mma)MG showed high thermal stability. The average activation energy of thermal degradation was found to be 200 kJ/mol for P(st-mma), 214 kJ/mol for P(st-mma)MG. The activation energy was highest for 10 min irradiated nanocomposites indicating an improvement in stability. The degradation mechanism was investigated by comparing the master plots constructed using the experimental data with theoretical master plots of various kinetic models. The thermal degradation of P(st-mma) and P(st-mma)MG composite before and after irradiation governs the random scission mechanism. SEM and TEM micrographs showed improved interactions and degradation of composites after 10 min and 20 min irradiation respectively.

  20. A Nordic project on high speed low power design in sub-micron CMOS technology for mobile phones

    DEFF Research Database (Denmark)

    Olesen, Ole

    This paper is a survey paper presenting the Nordic CONFRONT project and reporting some results from the group at CIE/DTU, Denmark. The objective of the project is to demonstrate the feasibility of sub-micron CMOS for the realisation of RF front-end circuits operating at frequencies in the 1...

  1. Effect of Stereochemistry on Directed Self-Assembly of Poly(styrene-b-lactide) Films on Chemical Patterns

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xiao; Liu, Yadong; Wan, Lei; Li, Zhaolei; Suh, Hyoseon; Ren, Jiaxing; Ocola, Leonidas E.; Hu, Wenbing; Ji, Shengxiang; Nealey, Paul F.

    2016-03-15

    We demonstrated here for the first time that the stereochemistry of polylactide (PLA) blocks affected the assembly behaviors of PS-b-PLA on chemical patterns. Two PS-b-PLA block copolymers, where the PLA block is either racemic (PDLLA) or left-handed (PLLA), were synthesized and directed to assemble on chemical patterns with a wide range of L-s/L-o. PS-b-PDLLA was stretched up to 70% on chemical patterns, while PS-b-PLLA was only stretched by 20%. The assembly behavior of PS-b-PDLLA was different from AB diblock copolymer, but similar to that of ABA triblock copolymer. The high stretchability might be attributed to the formation of stereocomplexes in PDLLA blocks. Compared to ABA triblock copolymers, stereocomplexed diblock copolymers have much faster assembly kinetics. This observation provides a new concept to achieve large process windows by the introduction of specific interactions, for example, H-bonding, supramolecular interaction, and sterecomplexation, between polymer chains.

  2. Water ice and sub-micron ice particles on Tethys and Mimas

    Science.gov (United States)

    Scipioni, Francesca; Nordheim, Tom; Clark, Roger Nelson; D'Aversa, Emiliano; Cruikshank, Dale P.; Tosi, Federico; Schenk, Paul M.; Combe, Jean-Philippe; Dalle Ore, Cristina M.

    2017-10-01

    IntroductionWe present our ongoing work, mapping the variation of the main water ice absorption bands, and the distribution of the sub-micron particles, across Mimas and Tethys’ surfaces using Cassini-VIMS cubes acquired in the IR range (0.8-5.1 μm). We present our results in the form of maps of variation of selected spectral indicators (depth of absorption bands, reflectance peak height, spectral slopes).Data analysisVIMS acquires hyperspectral data in the 0.3-5.1 μm spectral range. We selected VIMS cubes of Tethys and Mimas in the IR range (0.8-5.1 μm). For all pixels in the selected cubes, we measured the band depths for water-ice absorptions at 1.25, 1.5 and 2.02 μm and the height of the 3.6 μm reflection peak. Moreover, we considered the spectral indictors for particles smaller than 1 µm [1]: (i) the 2 µm absorption band is asymmetric and (ii) it has the minimum shifted to longer λ (iii) the band depth ratio 1.5/2.0 µm decreases; (iv) the reflection peak at 2.6 µm decreases; (v) the Fresnel reflection peak is suppressed; (vi) the 5 µm reflectance is decreased relative to the 3.6 µm peak. To characterize the global variation of water-ice band depths, and of sub-micron particles spectral indicators, across Mimas and Tethys, we sampled the two satellites’ surfacees with a 1°x1° fixed-resolution grid and then averaged the band depths and peak values inside each square cell.3. ResultsFor both moons we find that large geologic features, such as the Odysseus and Herschel impact basins, do not correlate with water ice’s abundance variation. For Tethys, we found a quite uniform surface on both hemispheres. The only deviation from this pattern shows up on the trailing hemisphere, where we notice two north-oriented, dark areas around 225° and 315°. For Mimas, the leading and trailing hemispheres appear to be quite similar in water ice abundance, the trailing portion having water ice absorption bands lightly more suppressed than the leading side

  3. Acoustic Emission Patterns and the Transition to Ductility in Sub-Micron Scale Laboratory Earthquakes

    Science.gov (United States)

    Ghaffari, H.; Xia, K.; Young, R.

    2013-12-01

    We report observation of a transition from the brittle to ductile regime in precursor events from different rock materials (Granite, Sandstone, Basalt, and Gypsum) and Polymers (PMMA, PTFE and CR-39). Acoustic emission patterns associated with sub-micron scale laboratory earthquakes are mapped into network parameter spaces (functional damage networks). The sub-classes hold nearly constant timescales, indicating dependency of the sub-phases on the mechanism governing the previous evolutionary phase, i.e., deformation and failure of asperities. Based on our findings, we propose that the signature of the non-linear elastic zone around a crack tip is mapped into the details of the evolutionary phases, supporting the formation of a strongly weak zone in the vicinity of crack tips. Moreover, we recognize sub-micron to micron ruptures with signatures of 'stiffening' in the deformation phase of acoustic-waveforms. We propose that the latter rupture fronts carry critical rupture extensions, including possible dislocations faster than the shear wave speed. Using 'template super-shear waveforms' and their network characteristics, we show that the acoustic emission signals are possible super-shear or intersonic events. Ref. [1] Ghaffari, H. O., and R. P. Young. "Acoustic-Friction Networks and the Evolution of Precursor Rupture Fronts in Laboratory Earthquakes." Nature Scientific reports 3 (2013). [2] Xia, Kaiwen, Ares J. Rosakis, and Hiroo Kanamori. "Laboratory earthquakes: The sub-Rayleigh-to-supershear rupture transition." Science 303.5665 (2004): 1859-1861. [3] Mello, M., et al. "Identifying the unique ground motion signatures of supershear earthquakes: Theory and experiments." Tectonophysics 493.3 (2010): 297-326. [4] Gumbsch, Peter, and Huajian Gao. "Dislocations faster than the speed of sound." Science 283.5404 (1999): 965-968. [5] Livne, Ariel, et al. "The near-tip fields of fast cracks." Science 327.5971 (2010): 1359-1363. [6] Rycroft, Chris H., and Eran Bouchbinder

  4. Production and characterization of poly(styrene-co-methylmethacrylate);Producao e caracterizacao de poliestireno-co-metacrilato de metila

    Energy Technology Data Exchange (ETDEWEB)

    Augustinho, Tiago R.; Coan, Thais; Abarca, Silvia A.C.; Testoni, Alex A.S.; Baumgarten, Bruno P.; Machado, Ricardo A.F., E-mail: tiagoqmc@gmail.co [Universidade Federal de Santa Catarina (UFSC), Florianopolis (Brazil). Dept. de Engenharia Quimica e Alimentos

    2009-07-01

    Polystyrene (PS) is a polymer used in diverse industrial segments. It is easy to process and has a low cost when compared to other materials. However, PS has low mechanical resistance, which limits its application in some areas. Thus, a methodology that is sufficiently used is the synthesis of a copolymer, formed of two or more monomers to get products that have characteristics that are not possible to obtain with only one monomer. In this work, the styrene and methyl methacrylate monomers had been carried through reactions of copolymerization by means of polymerization in suspension using (MMA) with styrene in a bigger percentage. MMA was selected for being a monomer that results in a polymeric configuration more resistant than the PS. The copolymerization was proven to occur by infra-red spectroscopy (IR) and Nuclear Magnetic Resonance (NMR). Different analyses were performed using different initiators, weight molar and conversion studies. (author)

  5. Large area sub-micron chemical imaging of magnesium in sea urchin teeth.

    Science.gov (United States)

    Masic, Admir; Weaver, James C

    2015-03-01

    The heterogeneous and site-specific incorporation of inorganic ions can profoundly influence the local mechanical properties of damage tolerant biological composites. Using the sea urchin tooth as a research model, we describe a multi-technique approach to spatially map the distribution of magnesium in this complex multiphase system. Through the combined use of 16-bit backscattered scanning electron microscopy, multi-channel energy dispersive spectroscopy elemental mapping, and diffraction-limited confocal Raman spectroscopy, we demonstrate a new set of high throughput, multi-spectral, high resolution methods for the large scale characterization of mineralized biological materials. In addition, instrument hardware and data collection protocols can be modified such that several of these measurements can be performed on irregularly shaped samples with complex surface geometries and without the need for extensive sample preparation. Using these approaches, in conjunction with whole animal micro-computed tomography studies, we have been able to spatially resolve micron and sub-micron structural features across macroscopic length scales on entire urchin tooth cross-sections and correlate these complex morphological features with local variability in elemental composition. Copyright © 2015 Elsevier Inc. All rights reserved.

  6. Chemical Mapping of Proterozoic Organic Matter at Sub-Micron Spatial Resolution

    Science.gov (United States)

    Oehler, Dorothy Z.; Robert, Francois; Mostefaoui, Smail; Meibom, Anders; Selo, Madeleine; McKay, David S.

    2006-01-01

    We have used a NanoSIMS ion microprobe to map sub-micron-scale distributions of carbon, nitrogen, sulfur, silicon, and oxygen in organic microfossils and laminae from the approximately 0.85 Ga Bitter Springs Formation of Australia. The data provide clues about the original chemistry of the microfossils, the silicification process, and biosignatures of specific microorganisms and microbial communities. Chemical maps of fossil unicells and filaments reveal distinct wall-and sheath-like structures enriched in C, N and S, consistent with their accepted biological origin. Surprisingly, organic laminae, previously considered to be amorphous, also exhibit filamentous and apparently compressed spheroidal structures defined by strong enrichments in C, N and S. By analogy to data from the well-preserved microfossils, these structures are interpreted as being of biological origin, most likely representing densely packed remnants of microbial mats. Because the preponderance of organic matter in Precambrian sediments is similarly "amorphous," our findings open a large body of generally neglected material to in situ structural, chemical, and isotopic study. Our results also offer new criteria for assessing biogenicity of problematic kerogenous materials and thus can be applied to assessments of poorly preserved or fragmentary organic residues in early Archean sediments and any that might occur in meteorites or other extraterrestrial samples.

  7. Sub-micron Hard X-ray Fluorescence Imaging of Synthetic Elements

    Science.gov (United States)

    Jensen, Mark P.; Aryal, Baikuntha P.; Gorman-Lewis, Drew; Paunesku, Tatjana; Lai, Barry; Vogt, Stefan; Woloschak, Gayle E.

    2013-01-01

    Synchrotron-based X-ray fluorescence microscopy (SXFM) using hard X-rays focused into sub-micron spots is a powerful technique for elemental quantification and mapping, as well as microspectroscopic measurement such as μ-XANES (X-ray absorption near edge structure). We have used SXFM to image and simultaneously quantify the transuranic element plutonium at the L3 or L2 edge as well as lighter biologically essential elements in individual rat pheochromocytoma (PC12) cells after exposure to the long-lived plutonium isotope 242Pu. Elemental maps reveal that plutonium localizes principally in the cytoplasm of the cells and avoids the cell nucleus, which is marked by the highest concentrations of phosphorus and zinc, under the conditions of our experiments. The minimum detection limit under typical acquisition conditions for an average 202 μm2 cell is 1.4 fg Pu/cell or 2.9 × 10−20 moles Pu/μm2, which is similar to the detection limit of K-edge SXFM of transition metals at 10 keV. Copper electron microscopy grids were used to avoid interference from gold X-ray emissions, but traces of strontium present in naturally occurring calcium can still interfere with plutonium detection using its Lα X-ray emission. PMID:22444530

  8. Scalable Sub-micron Patterning of Organic Materials Toward High Density Soft Electronics.

    Science.gov (United States)

    Kim, Jaekyun; Kim, Myung-Gil; Kim, Jaehyun; Jo, Sangho; Kang, Jingu; Jo, Jeong-Wan; Lee, Woobin; Hwang, Chahwan; Moon, Juhyuk; Yang, Lin; Kim, Yun-Hi; Noh, Yong-Young; Jaung, Jae Yun; Kim, Yong-Hoon; Park, Sung Kyu

    2015-09-28

    The success of silicon based high density integrated circuits ignited explosive expansion of microelectronics. Although the inorganic semiconductors have shown superior carrier mobilities for conventional high speed switching devices, the emergence of unconventional applications, such as flexible electronics, highly sensitive photosensors, large area sensor array, and tailored optoelectronics, brought intensive research on next generation electronic materials. The rationally designed multifunctional soft electronic materials, organic and carbon-based semiconductors, are demonstrated with low-cost solution process, exceptional mechanical stability, and on-demand optoelectronic properties. Unfortunately, the industrial implementation of the soft electronic materials has been hindered due to lack of scalable fine-patterning methods. In this report, we demonstrated facile general route for high throughput sub-micron patterning of soft materials, using spatially selective deep-ultraviolet irradiation. For organic and carbon-based materials, the highly energetic photons (e.g. deep-ultraviolet rays) enable direct photo-conversion from conducting/semiconducting to insulating state through molecular dissociation and disordering with spatial resolution down to a sub-μm-scale. The successful demonstration of organic semiconductor circuitry promise our result proliferate industrial adoption of soft materials for next generation electronics.

  9. Laser smoothing of sub-micron grooves in hydroxyl-rich fused silica

    Energy Technology Data Exchange (ETDEWEB)

    Shen, N; Matthews, M J; Fair, J E; Britten, J A; Nguyen, H T; Cooke, D; Elhadj, S; Yang, S T

    2009-10-30

    Nano- to micrometer-sized surface defects on UV-grade fused silica surfaces are known to be effectively smoothed through the use of high-temperature localized CO{sub 2} laser heating, thereby enhancing optical properties. However, the details of the mass transport and the effect of hydroxyl content on the laser smoothing of defective silica at submicron length scales is still not completely understood. In this study, we examine the morphological evolution of sub-micron, dry-etched periodic surface structures on type II and type III SiO{sub 2} substrates under 10.6 {micro}m CO{sub 2} laser irradiation using atomic force microscopy (AFM). In-situ thermal imaging was used to map the transient temperature field across the heated region, allowing assessment of the T-dependent mass transport mechanisms under different laser-heating conditions. Computational fluid dynamics simulations correlated well with experimental results, and showed that for large effective capillary numbers (N{sub c} > 2), surface diffusion is negligible and smoothing is dictated by capillary action, despite the relatively small spatial scales studied here. Extracted viscosity values over 1700-2000K were higher than the predicted bulk values, but were consistent with the surface depletion of OH groups, which was confirmed using confocal Raman microscopy.

  10. Ultrathin oxides for the SCM analysis of sub-micron doping profiles

    Energy Technology Data Exchange (ETDEWEB)

    Ciampolini, Lorenzo; Bertin, F.; Hartmann, J.M.; Rochat, N.; Holliger, Ph.; Laugier, F.; Chabli, A

    2003-09-15

    Attenuated total reflection (ATR) spectroscopy and spectroscopic ellipsometry (SE) have been used to characterize oxides used for the scanning capacitance microscopy (SCM) technique. SCM has been used to study boron and phosphorous doped Si test structures epitaxially grown on (100) Si substrates. SCM samples have one-dimensional (1D) doping profiles with sub-micron features, with staircase-like steps in the unipolar sample and a smoother profile in the bipolar sample, as obtained by secondary ion mass spectrometry (SIMS) profiling. Cross-sectional SCM results obtained on samples oxidized by the standard low-temperature UV-ozone method are presented, discussed and compared to results obtained on cleaved samples oxidized by a simple exposure to air. The results show that the native oxide covering a (110) cleaved section may yield SCM images of sufficient quality, with no contrast reversal on a wide range of doping levels, as well as observed on sections prepared with the UV-ozone technique. However, the long-term stability of the SCM signal on native oxides is poor, and UV-ozone oxidation can be used to recover a valid SCM signal. Realistic ultrathin oxide thickness data obtained by SE on (110) substrates are presented together with ATR results, which confirm the superior quality of UV-ozone oxides with respect to other kinds of oxides.

  11. Reactive blending of poly(styrene-maleic) anhydride with poly(phenylene oxide) by addition of `-amino-polystyrene

    NARCIS (Netherlands)

    Koning, Cor; Ikker, Andreas; Ikker, A.; Borggreve, Rein; Leemans, Luc; Möller, Martin; Moller, M.

    1993-01-01

    -(3-Aminopropyl-l-amino)polystyrene (-amino-PS) was melt-blended with styrene/maleic anhydride copolymers (SMA) containing 28 wt% maleic anhydride groups. The terminal primary amino group can react with the maleic anhydride monomer units in SMA, forming imides. The resulting product turned out to be

  12. Chemical resistance of core-shell particles (PS/PMMA polymerized by seeded suspension

    Directory of Open Access Journals (Sweden)

    Luiz Fernando Belchior Ribeiro

    2017-09-01

    Full Text Available Abstract Core-shell particles were produced on seeded suspension polymerization by using polystyrene (PS as polymer core, or seed, and methyl methacrylate (MMA as the shell forming monomer. Two synthesis routes were evaluated by varying the PS seed conversion before MMA addition. The main purpose of this work was to investigate the influence of synthesis routes on the morphology and chemical resistance of the resulting particles. 1H NMR spectroscopy showed that the use of PS seeds with lower conversion led to the formation of higher amount of poly(styrene-co-MMA. The copolymer acted as a compatibilizer, decreasing the interfacial energy between both homopolymers. As a consequence, a larger amount of reduced PMMA cluster were formed, as was revealed by TEM measurements. Samples in this system showed enhanced resistance to cyclohexane attack compared with pure PS, with a PS extraction of only 37% after 54 hours test.

  13. Investigations on the Phase Diagram and Interaction Parameter of Poly(styrene-b-1,3-cyclohexadiene) Copolymers

    KAUST Repository

    Misichronis, Konstantinos

    2017-03-15

    A series of linear diblock copolymers containing polystyrene (PS) and poly(1,3-cyclohexadiene) (PCHD) with high 1,4-microstructure (>87%) was synthesized by anionic polymerization and high vacuum techniques. Microphase separation in the bulk was examined by transmission electron microscopy (TEM) and small-angle X-ray scattering (SAXS) and compared to computational analysis of the predicted morphological phase diagram for this system. Because of the high conformational asymmetry between PS and PCHD, these materials self-assemble into typical morphologies expected for linear diblock copolymer systems and atypical structures. Rheological measurements were conducted and revealed order–disorder transition temperatures (TODT), for the first time for PS-b-PCHD copolymers, resulting in a working expression for the effective interaction parameter χeff = 32/T – 0.016. Furthermore, we performed computational studies that coincide with the experimental results. These copolymers exhibit well-ordered structures even at high temperatures (∼260 °C) therefore providing a better insight concerning their microphase separation at the nanoscale which is important for their potential use in nanotechnology and/or nanolithography applications.

  14. Sub-micron opto-chemical probes for studying living neurons

    Science.gov (United States)

    Hossein-Zadeh, M.; Delgado, J.; Schweizer, F.; Lieberman, R.

    2017-02-01

    We have fabricated sub-micron opto-chemical probes for pH, oxygen and calcium monitoring and demonstrated their application in intracellular and extracellular monitoring of neurons (cortical neuronal cultures and acute hippocampal slices). Using these probes, we have measured extracellular pH in the stratum radiatum of the CA1 region of mouse hippocampus upon stimulation of presynaptic Schaffer collateral axons. Synaptic transmission was monitored using standard electrophysiological techniques. We find that the local pH transiently changes in response to synaptic stimulation. In addition, the geometry of the functionalized region on the probe combined with high sensitivity imaging enables simultaneous monitoring of spatially adjacent but distinct compartments. As proof of concept we impaled cultured neurons with the probe measured calcium and pH inside as well as directly outside of neurons as we changed the pH and calcium concentration in the physiological solution in the perfusion chamber. As such these probes can be used to study the impact of the environment on both cellular and extra-cellular space. Additionally as the chemical properties of the surrounding medium can be controlled and monitored with high precision, these probes enable differential measurement of the target parameter referenced to a stable bath. This approach eliminates the uncertainties associated with non-chemical fluctuations in the fluorescent emission and result in a self-calibrated opto-chemical probe. We have also demonstrated multifunctional probes that are capable of measuring up to three parameters in the extracellular space in brain slices.

  15. Flow curve analysis of a Pickering emulsion-polymerized PEDOT:PSS/PS-based electrorheological fluid

    Science.gov (United States)

    Kim, So Hee; Choi, Hyoung Jin; Leong, Yee-Kwong

    2017-11-01

    The steady shear electrorheological (ER) response of poly(3, 4-ethylenedioxythiophene): poly(styrene sulfonate)/polystyrene (PEDOT:PSS/PS) composite particles, which were initially fabricated from Pickering emulsion polymerization, was tested with a 10 vol% ER fluid dispersed in a silicone oil. The model independent shear rate and yield stress obtained from the raw torque-rotational speed data using a Couette type rotational rheometer under an applied electric field strength were then analyzed by Tikhonov regularization, which is the most suitable technique for solving an ill-posed inverse problem. The shear stress-shear rate data also fitted well with the data extracted from the Bingham fluid model.

  16. Sub-micron resolution high-speed spectral domain optical coherence tomography in quality inspection for printed electronics

    Science.gov (United States)

    Czajkowski, J.; Lauri, J.; Sliz, R.; Fält, P.; Fabritius, T.; Myllylä, R.; Cense, B.

    2012-04-01

    We present the use of sub-micron resolution optical coherence tomography (OCT) in quality inspection for printed electronics. The device used in the study is based on a supercontinuum light source, Michelson interferometer and high-speed spectrometer. The spectrometer in the presented spectral-domain optical coherence tomography setup (SD-OCT) is centered at 600 nm and covers a 400 nm wide spectral region ranging from 400 nm to 800 nm. Spectra were acquired at a continuous rate of 140,000 per second. The full width at half maximum of the point spread function obtained from a Parylene C sample was 0:98 m. In addition to Parylene C layers, the applicability of sub-micron SD-OCT in printed electronics was studied using PET and epoxy covered solar cell, a printed RFID antenna and a screen-printed battery electrode. A commercial SD-OCT system was used for reference measurements.

  17. Effective Use of Focused Ion Beam (FIB) in Investigating Fundamental Mechanical Properties of Metals at the Sub-Micron Scale

    OpenAIRE

    Greer, Julia R.

    2006-01-01

    Recent advances in the 2-beam focused ion beams technology (FIB) have enabled researchers to not only perform high-precision nanolithography and micro-machining, but also to apply these novel fabrication techniques to investigating a broad range of materials' properties at the submicron and nano-scales. In our work, the FIB is utilized in manufacturing of sub-micron cylinders, or nano-pillars, as well as of TEM cross-sections to directly investigate plasticity of metals at thes...

  18. Flexible White Organic Light-Emitting Diodes Based on Single-Walled Carbon Nanotube:Poly(3,4-ethylenedioxythiophene)/Poly(styrene sulfonate) Transparent Conducting Film

    Science.gov (United States)

    Zhang, Beibei; Li, Fushan; Lin, Zhixiao; Wu, Chaoxing; Guo, Tailiang; Liu, Wenbin; Su, Yang; Du, Jinhong

    2012-07-01

    Single-walled carbon nanotube:poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) hybrid film (SWCNT:PEDOT/PSS) hybrid conducting film was obtained by using spray-coating technique, based on which a white flexible organic light emitting diode (FOLED) was fabricated with the structure of SWCNT:PEDOT/PSS/N,N-diphenyl-N,N-bis(1-napthyl)-1,1-biphenyl-4,4-diamine/5,6,11,12-tetraphenylnaphthacene:4,4'-bis(2,2'-diphenylvinyl)-1,1'-biphenyl/4,7-diphenyl-1,10-phenanthroline/LiF/Al. The hybrid film exhibited superior surface morphology, electrical conductivity to the pure SWCNT network. The as-fabricated FOLED showed a stable white emission that is close to the equi-energy white point upon bending, and the light-emitting efficiency of the device was significantly improved by using the hybrid film as anode. The hybrid film holds promise for application in flexible lighting and display.

  19. Flexible resistive switching device based on poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/poly(4-vinylphenol) (PVP) composite and methyl red heterojunction

    Science.gov (United States)

    Hassan, Gul; Ali, Shawkat; Bae, Jinho; Lee, Chong Hyun

    2017-04-01

    To obtain a desired performance of non-volatile memory applications, heterojunction-based resistive switching devices have tremendous attractions. In this paper, we demonstrate resistive switching characteristics for heterojunction of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS)/poly(4-vinylphenol) (PVP) composite and methyl red sandwiched in between bottom and top silver (Ag) electrodes. The proposed heterojunction layers are fabricated through spin coater at 3000 rpm for 60 s each, and the Ag electrodes are deposited through a commercialized inkjet printer DMP-3000 on polyethyleneterephthalate (PET) substrate. To verify the proposed device, the resistive switching on dual polarity voltage of ±10.2 V is measured over more than 500 endurance cycles. The paper also presents an R off/ R on ratio which can adjust through an active layer's area and a blending ratio of the PEDOT:PSS and PVP. By applying the area of 100 μm2 and the blending ratio of 3:1, we achieve the higher R off/ R on ratio of 121, and its high resistance state (HRS) and low resistance state (LRS) are observed as 3000 kΩ and 24.7 kΩ, respectively. To maintain a long retention time, the device is encapsulated with PDMS, which changes a little variations of 52 Ω for HRS 498 Ω for LRS over 60 days. For the flexible realization to be utilized in wearable applications, it can be easily applied on a plastic substrate using printed technologies.

  20. The effect of multifunctional monomers/oligomers Additives on electron beam radiation crosslinking of poly (styrene-block-isoprene/butadiene-block-styrene) (SIBS)

    Science.gov (United States)

    Wu, Jinping; Soucek, Mark D.

    2016-02-01

    The effect of multifunctional monomers or oligomers (MFM/O) additives on electron beam (E-beam) radiation induced crosslinking of poly (styrene-block-isoprene/butadiene-block-styrene) (SIBS) was studied. Ten types of MFM/O were investigated, including trimethylolpropane trimethacrylate (TMPTMA), trimethylolpropane triacrylate (TMPTA), triallyl cyanurate (TAC), polybutadiene diacrylate (PB-diacrylate), ethylene glycol dimethylacrylate (EGDMA), butylene glycol dimethacrylate (BGDMA), 1,2-polybutadiene. The effects of MFM/O concentration and E-beam radiation dose on properties of SIBS were studied including tensile strength, elongation-at-break, modulus, gel content, equilibrium swelling and crosslink density. TMPTA significantly improved the tensile modulus and crosslink density of SIBS. SIBS with TMPTMA and TMTPMA with inhibitor showed a 50% increase in tensile strength. The solubility of MFM/O in SIBS was also investigated by a selective swelling method. The MFM/O were found to be soluble in both phases of SIBS. The viscosity of SIBS with methacrylate type MFM/O was stable at 200 °C.

  1. Nanofiltration membranes of poly(styrene- co-chloro-methylstyrene)- grafted-DGEBA reinforced with gold and polystyrene nanoparticles for water purification

    Science.gov (United States)

    Kausar, Ayesha; Siddiq, Muhammad

    2017-06-01

    The matrix material for nanofiltration membranes was prepared through chemical grafting of poly(styrene- co-chloromethylstyrene) (PSCMS) to DGEBA using hexamethylenediamine as linker. The phase inversion technique was used to form PSCMS- g-DGEBA membranes. This effort also involves the designing of gold nanoparticles and its composite nanoparticles with polystyrene microspheres as matrix reinforcement. The nanoporous morphology was observed at lower filler content and there was formation of nanopattern at increased nanofiller content. The tensile strength was improved from 32.5 to 35.2 MPa with the increase in AuNPs-PSNPs loading from 0.1 to 1 wt%. The glass transition temperature was also enhanced from 132 to 159 °C. The membrane properties were measured via nanofiltration set-up. Higher pure water permeation flux, recovery, and salt rejection were measured for novel membranes. PSCMS- g-DGEBA/AuNPs-PSNPs membrane with 1 wt% loading showed flux of 2.01 mL cm-2 min-1 and salt rejection ratio of 70.4 %. Efficiency of the gold/polystyrene nanoparticles reinforced membranes for the removal of Hg2+ and Pb2 was found to be 99 %. Novel hybrid membranes possess fine characteristics to be utilized in industrial water treatment units.

  2. Preparation of Fe3O4-Embedded Poly(styrene)/Poly(thiophene) Core/Shell Nanoparticles and Their Hydrogel Patterns for Sensor Applications

    Science.gov (United States)

    Kim, Yong Seok; Lee, Hyun Jong; Govindaiah, Patakamuri; Son, Woohyun; Koh, Won-Gun; Cheong, In Woo; Kim, Jung Hyun

    2014-01-01

    This research describes the preparation and sensor applications of multifunctional monodisperse, Fe3O4 nanoparticles-embedded poly(styrene)/poly(thiophene) (Fe3O4-PSt/PTh), core/shell nanoparticles. Monodisperse Fe3O4-PSt/PTh nanoparticles were prepared by free-radical combination (mini-emulsion/emulsion) polymerization for Fe3O4-PSt core and oxidative seeded emulsion polymerization for PTh shell in the presence of FeCl3/H2O2 as a redox catalyst, respectively. For applicability of Fe3O4-PSt/PTh as sensors, Fe3O4-PSt/PTh-immobilized poly(ethylene glycol) (PEG)-based hydrogels were fabricated by photolithography. The hydrogel patterns showed a good sensing performance under different H2O2 concentrations. They also showed a quenching sensitivity of 1 μg/mL for the Pd2+ metal ion within 1 min. The hydrogel micropatterns not only provide a fast water uptake property but also suggest the feasibility of both H2O2 and Pd2+ detection. PMID:28788450

  3. Preparation of Fe3O4-Embedded Poly(styrene/Poly(thiophene Core/Shell Nanoparticles and Their Hydrogel Patterns for Sensor Applications

    Directory of Open Access Journals (Sweden)

    Yong Seok Kim

    2014-01-01

    Full Text Available This research describes the preparation and sensor applications of multifunctional monodisperse, Fe3O4 nanoparticles-embedded poly(styrene/poly(thiophene (Fe3O4-PSt/PTh, core/shell nanoparticles. Monodisperse Fe3O4-PSt/PTh nanoparticles were prepared by free-radical combination (mini-emulsion/emulsion polymerization for Fe3O4-PSt core and oxidative seeded emulsion polymerization for PTh shell in the presence of FeCl3/H2O2 as a redox catalyst, respectively. For applicability of Fe3O4-PSt/PTh as sensors, Fe3O4-PSt/PTh-immobilized poly(ethylene glycol (PEG-based hydrogels were fabricated by photolithography. The hydrogel patterns showed a good sensing performance under different H2O2 concentrations. They also showed a quenching sensitivity of 1 µg/mL for the Pd2+ metal ion within 1 min. The hydrogel micropatterns not only provide a fast water uptake property but also suggest the feasibility of both H2O2 and Pd2+ detection.

  4. Low Work-function Poly(3,4-ethylenedioxylenethiophene): Poly(styrene sulfonate) as Electron-transport Layer for High-efficient and Stable Polymer Solar Cells

    Science.gov (United States)

    Zhang, Yong; Chen, Lie; Hu, Xiaotian; Zhang, Lin; Chen, Yiwang

    2015-08-01

    Low-work-function poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) modified with polyethylenimine (PEIE) was used as an electron transport layer (ETL) for polymer solar cells (PSCs). A thin layer of PEIE film was spin-coated onto the surface on the PEDOT:PSS films, thus substantially changing their charge selectivity from supporting hole transport to supporting electron transport. It was also found that the PEDOT:PSS/PEIE ETL exhibited higher interfacial contact, a more favorable active morphology, and improved charge mobility. By virtue of these beneficial properties, inverted PSCs based on low-bandgap semiconducting photoactive layers achieved a notably improved power conversion efficiency (PCE) of 7.94%, superior even to the corresponding performance of devices with only a ZnO layer. Surpassing our expectations, compared with the extreme degradation of device stability observed when pure PEDOT:PSS is used, PEIE-modified PEDOT:PSS can considerably suppress device degradation because of the hydrophobic and alkaline nature of PEIE, which not only reduces the hygroscopicity of the PEDOT:PSS but also neutralizes the acidic PEDOT:PSS and thus prevents the corrosion of the ITO cathode. These results demonstrate the potential of PEIE-modified PEDOT:PSS for use as an efficient ETL in commercial printed electronic devices.

  5. Shape Memory Polymer Composites of Poly(styrene-b-butadiene-b-styrene Copolymer/Liner Low Density Polyethylene/Fe3O4 Nanoparticles for Remote Activation

    Directory of Open Access Journals (Sweden)

    Yongkun Wang

    2016-11-01

    Full Text Available Magnetically sensitive shape memory poly(styrene-b-butadiene-b-styrene copolymer (SBS/liner low density polyethylene (LLDPE composites filled with various contents of Fe3O4 nanoparticles were prepared. The influence of the Fe3O4 nanoparticles content on the thermal properties, mechanical properties, fracture morphology, magnetic behavior, and shape memory effect of SBS/LLDPE/Fe3O4 composites was systematically studied in this paper. The results indicated that homogeneously dispersed Fe3O4 nanoparticles ensured the uniform heat generation and transfer in the alternating magnetic field, and endowed the SBS/LLDPE/Fe3O4 composites with an excellent magnetically responsive shape memory effect. When the shape memory composites were in the alternating magnetic field (f = 60 kHz, H = 21.21 kA·m−1, the best shape recovery ratio reached 99%, the shape retention ratio reached 99.4%, and the shape recovery speed increased significantly with the increment of Fe3O4 nanoparticles. It is anticipated that tagging products with this novel shape memory composite is helpful for the purpose of an intravascular delivery system in Micro-Electro-Mechanical System (MEMS devices.

  6. Morphology and contact angle studies of poly(styrene-co-acrylonitrile modified epoxy resin blends and their glass fibre reinforced composites

    Directory of Open Access Journals (Sweden)

    2007-06-01

    Full Text Available In this study, the surface characteristics of blends and composites of epoxy resin were investigated. Poly(styrene-co-acylonitrile (SAN was used to modify diglycedyl ether of bisphenol-A (DGEBA type epoxy resin cured with diamino diphenyl sulfone (DDS and the modified epoxy resin was used as the matrix for fibre reinforced composites (FRP’s. E-glass fibre was used as the fibre reinforcement. The scanning electron micrographs of the fractured surfaces of the blends and composites were analyzed. Morphological analysis revealed different morphologies such as dispersed, cocontinuous and phase-inverted structures for the blends. Contact angle studies were carried out using water and methylene iodide at room temperature. The solid surface energy was calculated using harmonic mean equations. Blending of epoxy resin increases its contact angle. The surface free energy, work of adhesion, interfacial free energy, spreading coefficient and Girifalco-Good’s interaction parameter were changed significantly in the case of blends and composites. The incorporation of thermoplastic and glass fibre reduces the wetting and hydrophilicity of epoxy resin.

  7. UV-induced polymerization of size-controlled platinum/poly[styrene-divinylbenzene-tri(propylene glycol diacrylate] hydrophobic catalyst beads in microfluidics

    Directory of Open Access Journals (Sweden)

    Jun Wei

    2015-10-01

    Full Text Available The catalytic exchange of hydrogen isotopes between hydrogen and water has been known to be a very useful process for the separation of tritium from tritiated water. For the process, a highly active hydrophobic catalyst is needed. This study provides an effective fabrication method of size-controlled platinum/poly[styrene-divinylbenzene-tri(propylene glycol diacrylate] [Pt/poly(SDB-TPGDA] hydrophobic catalyst beads with a narrow size distribution. Platinum nanoparticles were prepared by γ-ray-induced reduction in the aqueous phase first, and then uniformly dispersed in SDB-TPGDA comonomer after the hydrophobization of platinum nanoparticles with alkylamine stabilizers. The porous Pt/poly(SDB-TPGDA hydrophobic catalyst beads were synthesized by the UV-initiated polymerization of the mixture droplets prepared in a capillary-based microfluidic system. The size of as-prepared catalyst beads can be controlled in the range of 200–1,000 μm by adjusting the flow rate of dispersed and continuous phases, as well as the viscosity of the continuous phase. Sorbitan monooleate and cyclohexanol were used as coporogens to control the porosities of the catalyst beads.

  8. UV-induced polymerization of size-controlled platinum/poly[styrene-divinylbenzene-tri(propylene glycol) diacrylate] hydrophobic catalyst beads in microfluidics

    Energy Technology Data Exchange (ETDEWEB)

    Wi, Jun; Li, Xiang; Song, Tong; Song, Zi Fan; Chang, Zhen Qi [School of Nuclear Science and Technology, University of Science and Technology of China, Hefei (China); Meng, Da Qiao [Si Chuan Institute of Materials and Technology, Jiang You (China)

    2015-10-15

    The catalytic exchange of hydrogen isotopes between hydrogen and water has been known to be a very useful process for the separation of tritium from tritiated water. For the process, a highly active hydrophobic catalyst is needed. This study provides an effective fabrication method of size-controlled platinum/poly[styrene-divinylbenzene-tri(propylene glycol) diacrylate] [Pt/poly(SDB-TPGDA)] hydrophobic catalyst beads with a narrow size distribution. Platinum nanoparticles were prepared by γ-ray-induced reduction in the aqueous phase first, and then uniformly dispersed in SDB-TPGDA comonomer after the hydrophobization of platinum nanoparticles with alkylamine stabilizers. The porous Pt/poly(SDB-TPGDA) hydrophobic catalyst beads were synthesized by the UV-initiated polymerization of the mixture droplets prepared in a capillary-based microfluidic system. The size of as-prepared catalyst beads can be controlled in the range of 200-1,000 μm by adjusting the flow rate of dispersed and continuous phases, as well as the viscosity of the continuous phase. Sorbitan monooleate and cyclohexanol were used as coporogens to control the porosities of the catalyst beads.

  9. Second-order nonlinear optical properties of composite material of an azo-chromophore with a tricyanodiphenyl acceptor in a poly(styrene-co-methyl methacrylate) matrix

    Science.gov (United States)

    Shelkovnikov, Vladimir; Selivanova, Galina; Lyubas, Gleb; Korotaev, Sergey; Shundrina, Inna; Tretyakov, Evgeny; Zueva, Ekaterina; Plekhanov, Alexander; Mikerin, Sergey; Simanchuk, Andrey

    2017-07-01

    The composite material of new synthesized 4-((4-(N,N-n-dibutylamino) phenyl)diazenyl)-biphenyl-2,3,4-tricarbonitrile (GAS dye) in commercial poly(styrene-co-methyl methacrylate) (PSMMA) was prepared, poled and its nonlinear optical properties compared with DR1 dye were studied. High thermal stability of the composite material was revealed, and the maximal concentration of the chromophore was found to reach ∼20 wt%. The dipole moment, polarizability tensor, and first hyperpolarizability tensor of the investigated dyes were calculated by within the framework of the coupled perturbed density functional theory. A nanosecond second-harmonic generation Maker fringes technique was used which is capable of providing the magnitude of the second-order nonlinearity of optical materials at a wavelength of 1064 nm. For the tested GAS-PSMMA composite material, maximal coefficient d33 was found to be 50 pm/V. The nonlinear optical response, which was achieved here, shows possible usefulness of the GAS dye as a component for molecular design of nonlinear-optical materials with advanced characteristics.

  10. Prescribed 3-D Direct Writing of Suspended Micron/Sub-micron Scale Fiber Structures via a Robotic Dispensing System.

    Science.gov (United States)

    Yuan, Hanwen; Cambron, Scott D; Keynton, Robert S

    2015-06-12

    A 3-axis dispensing system is utilized to control the initiating and terminating fiber positions and trajectory via the dispensing software. The polymer fiber length and orientation is defined by the spatial positioning of the dispensing system 3-axis stages. The fiber diameter is defined by the prescribed dispense time of the dispensing system valve, the feed rate (the speed at which the stage traverses from an initiating to a terminating position), the gauge diameter of the dispensing tip, the viscosity and surface tension of the polymer solution, and the programmed drawing length. The stage feed rate affects the polymer solution's evaporation rate and capillary breakup of the filaments. The dispensing system consists of a pneumatic valve controller, a droplet-dispensing valve and a dispensing tip. Characterization of the direct write process to determine the optimum combination of factors leads to repeatedly acquiring the desired range of fiber diameters. The advantage of this robotic dispensing system is the ease of obtaining a precise range of micron/sub-micron fibers onto a desired, programmed location via automated process control. Here, the discussed self-assembled micron/sub-micron scale 3D structures have been employed to fabricate suspended structures to create micron/sub-micron fluidic devices and bioengineered scaffolds.

  11. Sub-micron particle number size distribution characteristics at two urban locations in Leicester

    Science.gov (United States)

    Hama, Sarkawt M. L.; Cordell, Rebecca L.; Kos, Gerard P. A.; Weijers, E. P.; Monks, Paul S.

    2017-09-01

    The particle number size distribution (PNSD) of atmospheric particles not only provides information about sources and atmospheric processing of particles, but also plays an important role in determining regional lung dose. Owing to the importance of PNSD in understanding particulate pollution two short-term campaigns (March-June 2014) measurements of sub-micron PNSD were conducted at two urban background locations in Leicester, UK. At the first site, Leicester Automatic Urban Rural Network (AURN), the mean number concentrations of nucleation, Aitken, accumulation modes, the total particles, equivalent black carbon (eBC) mass concentrations were 2002, 3258, 1576, 6837 # cm-3, 1.7 μg m-3, respectively, and at the second site, Brookfield (BF), were 1455, 2407, 874, 4737 # cm-3, 0.77 μg m-3, respectively. The total particle number was dominated by the nucleation and Aitken modes, with both consisting of 77%, and 81% of total number concentrations at AURN and BF sites, respectively. This behaviour could be attributed to primary emissions (traffic) of ultrafine particles and the temporal evolution of mixing layer. The size distribution at the AURN site shows bimodal distribution at 22 nm with a minor peak at 70 nm. The size distribution at BF site, however, exhibits unimodal distribution at 35 nm. This study has for the first time investigated the effect of Easter holiday on PNSD in UK. The temporal variation of PNSD demonstrated a good degree of correlation with traffic-related pollutants (NOX, and eBC at both sites). The meteorological conditions, also had an impact on the PNSD and eBC at both sites. During the measurement period, the frequency of NPF events was calculated to be 13.3%, and 22.2% at AURN and BF sites, respectively. The average value of formation and growth rates of nucleation mode particles were 1.3, and 1.17 cm-3 s-1 and 7.42, and 5.3 nm h-1 at AURN, and BF sites, respectively. It can suggested that aerosol particles in Leicester originate mainly

  12. Systematic Sub-Micron Na/Ca Banding in Orbulina universa and bilobata

    Science.gov (United States)

    Bonnin, E. A.; Zhu, Z.; Spero, H. J.; Hoenisch, B.; Russell, A. D.; Fehrenbacher, J. S.; Gagnon, A. C.

    2016-02-01

    Mg/Ca ratios in planktic foraminifera are used widely as a proxy for past sea-surface temperatures. However, over the last decade, it has become clear that these ratios are not constant throughout the shell. Instead these ratios vary systematically by several fold between day and night independent of temperature, a phenomenon that has yet to be explained mechanistically. Determining whether elements other than Mg also exhibit sub-micron banding is essential to properly interpret Me/Ca-based paleoproxies and could help constrain the mechanisms causing Me/Ca variability. Using time-of-flight secondary ion mass spectrometry (ToF-SIMS), an isotope mapping technique with a spatial resolution of roughly 200 nm, we discovered systematic Na/Ca banding in individuals of the symbiont-bearing planktic foraminifer Orbulina universa that had been cultured at constant temperature. Using stable-isotope time stamps, we show that this Na/Ca banding varies inversely with Mg/Ca, with high Na/Ca during the day and low Na/Ca at night for most individuals. Using a combination of analytical models and complementary instrumental techniques, we test whether these patterns can be explained by various ion transport processes. In addition to this Na/Ca banding pattern, there is a distinct region of both high Mg/Ca and high Na/Ca at the location of the primary organic membrane. This POM signature may be a useful way to map organic layers in foraminifera, a method we tested in bilobata, a rare morphotype of O. universa that develops a secondary sphere. Mapping Na/Ca and Mg/Ca in bilobata, we show that an additional organic layer is required during secondary sphere growth and that mineralization occurs over both spheres when this additional quasi-chamber forms. Applying ToF-SIMS and our new understanding of Na/Ca heterogeneity to bilobata is a first step towards connecting the extensive geochemical knowledge developed in O. universa to the multi-chambered species used in paleoceanography.

  13. Impact-disrupted gunshot residue: A sub-micron analysis using a novel collection protocol

    Directory of Open Access Journals (Sweden)

    V. Spathis

    2017-06-01

    Full Text Available The analysis of gunshot residue (GSR has played an integral role within the legal system in relation to shooting cases. With a characteristic elemental composition of lead, antimony, barium, and a typically discriminative spheroidal morphology, the presence and distribution of GSR can aid in firearm investigations. In this experiment, three shots of low velocity rim-fire ammunition were fired over polished silicon collection substrates placed at six intervals over a 100 cm range. The samples were analysed using a Field Emission Gun Scanning Electron Microscope (FEG-SEM in conjunction with an X-flash Energy Dispersive X-ray (EDX detector, allowing for GSR particle analyses of composition and structure at the sub-micron level. The results of this experiment indicate that although classic spheroidal particles are present consistently throughout the entire range of samples their sizes vary significantly, and at certain distances from the firearm particles with an irregular morphology were discerned, forming “impact-disrupted” GSR particles, henceforth colloquially referred to as “splats”. Upon further analysis, trends with regards to the formation of these splat particles were distinguished. An increase in splat frequency was observed starting at 10 cm from the firearm, with 147 mm−2 splat density, reaching a maximal flux at 40 cm (451 mm−2, followed by a gradual decrease to the maximum range sampled. Moreover, the structural morphology of the splats changes throughout the sampling range. At the distances closest to the firearm, molten-looking particles were formed, demonstrating the metallic residues were in a liquid state when their flight path was disrupted. However, at increased distances-primarily where the discharge plume was at maximum dispersion and moving away from the firearm, the residues have had time to cool in-fight resulting in semi-congealed and solid particles that subsequently disrupted upon impact, forming more

  14. Cathepsin K-targeted sub-micron particles for regenerative repair of vascular elastic matrix.

    Science.gov (United States)

    Jennewine, Brenton; Fox, Jonathan; Ramamurthi, Anand

    2017-04-01

    regenerative elastic matrix repair in the AAA wall. Proactive screening of high risk elderly patients now enables early detection of Abdominal Aortic Aneurysms (AAAs). Current management of small, growing AAAs is limited to passive, imaging based growth monitoring. There are also no established drug-based therapeutic alternatives to surgery for AAAs, which is unsuitable for many elderly patients, and none which can achieve restore disrupted and lost elastic matrix in the AAA wall, which is essential to achieve growth arrest or regression. We seek to test the feasibility of a regenerative therapy based on localized, one time delivery of drug-releasing Sub-Micron-sized drug delivery polymer Particles (SMPs) that are also uniquely chemically functionalized on their surface to also provide them pro-elastin-regenerative & anti-matrix degradative properties, and also conjugated with antibodies targeting cathepsin K, an elastolytic enzyme that is highly overexpressed in AAA tissues; the latter serves as a modality to enable targeted binding of the SMPs to the AAA wall following intravenous infusion, or intraoartal, catheter-based delivery. Such SMPs can potentially stimulate structural repair in the AAA wall following one time infusion to delay or prevent AAA growth to rupture. The therapy can provide a non-surgical treatment option for high risk AAA patients. Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  15. Effect of modified graphene and microwave irradiation on the mechanical and thermal properties of poly(styrene-co-methyl methacrylate)/graphene nanocomposites

    KAUST Repository

    Zubair, Mukarram

    2014-08-04

    The effect of modified graphene (MG) and microwave irradiation on the interaction between graphene (G) and poly(styrene-co-methyl meth acrylate) [P(S-co-MMA)] polymer matrix has been studied in this article. Modification of graphene was performed using nitric acid. P(S-co-MMA) polymer was blended via melt blending with pristine and MG. The resultant nanocomposites were irradiated under microwave at three different time intervals (5, 10, and 20 min). Compared to pristine graphene, MG showed improved interaction with P(S-co-MMA) polymer (P) after melt mixing and microwave irradiation. The mechanism of improved dispersion and interaction of modified graphene with P(S-co-MMA) polymer matrix during melt mixing and microwave irradiation is due to the presence of oxygen functionalities on the surface of MG as confirmed from Fourier transform infrared spectroscopy. The formation of defects on modified graphene and free radicals on P(S-co-MMA) polymer chains after irradiation as explained by Raman spectroscopy and X-Ray diffraction studies. The nanocomposites with 0.1 wt% G and MG have shown a 26% and 38% increase in storage modulus. After irradiation (10 min), the storage modulus further improved to 11.9% and 27.6% of nanocomposites. The glass transition temperature of nanocomposites also improved considerably after melt mixing and microwave irradiation (but only for polymer MG nanocomposite). However, at higher irradiation time (20 min), degradation of polymer nanocomposites occurred. State of creation of crosslink network after 10 min of irradiation and degradation after 20 min of irradiation of nanocomposites was confirmed from SEM studies. Copyright © 2014 John Wiley & Sons, Ltd.

  16. A Nordic project on high speed low power design in sub-micron CMOS technology for mobile phones

    DEFF Research Database (Denmark)

    Olesen, Ole

    This paper is a survey paper presenting the Nordic CONFRONT project and reporting some results from the group at CIE/DTU, Denmark. The objective of the project is to demonstrate the feasibility of sub-micron CMOS for the realisation of RF front-end circuits operating at frequencies in the 1.......8-2.0 GHz range. The ultimate goal is a single-chip transceiver, requiring only an external band-pass filter between the chip and the antenna. DECT has been chosen as a comparative standard to compare the new approaches developed in the work as well as to facilitate good knowledge transfer to industry. All...

  17. A simple and wide-range refractive index measuring approach by using a sub-micron grating

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Chun-Wei; Wu, Chun-Che; Lin, Shih-Chieh [Department of Power Mechanical Engineering, National Tsing Hua University, 101 Section 2, Kuang-Fu Road, Hsinchu 30013, Taiwan (China)

    2015-04-13

    This paper presents the design and simulation results of a high-precision low-cost refractometer that demonstrates the main advantage of a wide measurement range (1 ≤ n ≤ 2). The proposed design is based on the diffractive properties of sub-micron gratings and Snell's Law. The precision and uncertainty factors of the proposed system were tested and analyzed, revealing that the proposed refractometer demonstrates a wide measurement range with sensitivity of 10{sup −4}.

  18. Surface morphology of PS-PDMS diblock copolymer films

    DEFF Research Database (Denmark)

    Andersen, T.H.; Tougaard, S.; Larsen, N.B.

    2001-01-01

    Spin coated thin films (∼400 Å) of poly(styrene)–poly(dimethylsiloxane) (PS–PDMS) diblock copolymers have been investigated using X-ray Photoelectron Spectroscopy and Atomic Force Microscopy. Surface segregation of the poly(dimethylsiloxane) blocks was studied for five diblock copolymers which...... by use of peak shape analysis of the X-ray Photoelectron Spectra via the Tougaard Method. The amount of dimethylsiloxane in the uppermost part of the films was quantified as a function of annealing time and temperature. For annealing above the PS glass transition temperature, surface segregation...... of the dimethylsiloxane chain-ends occurs for all the studied PS–PDMS diblock copolymers. At room temperature, surface segregation takes place only when the amount of dimethylsiloxane in the diblock copolymers is small....

  19. Optically and acoustically triggerable sub-micron phase-change contrast agents for enhanced photoacoustic and ultrasound imaging

    Directory of Open Access Journals (Sweden)

    Shengtao Lin

    2017-06-01

    Full Text Available We demonstrate a versatile phase-change sub-micron contrast agent providing three modes of contrast enhancement: 1 photoacoustic imaging contrast, 2 ultrasound contrast with optical activation, and 3 ultrasound contrast with acoustic activation. This agent, which we name ‘Cy-droplet’, has the following novel features. It comprises a highly volatile perfluorocarbon for easy versatile activation, and a near-infrared optically absorbing dye chosen to absorb light at a wavelength with good tissue penetration. It is manufactured via a ‘microbubble condensation’ method. The phase-transition of Cy-droplets can be optically triggered by pulsed-laser illumination, inducing photoacoustic signal and forming stable gas bubbles that are visible with echo-ultrasound in situ. Alternatively, Cy-droplets can be converted to microbubble contrast agents upon acoustic activation with clinical ultrasound. Potentially all modes offer extravascular contrast enhancement because of the sub-micron initial size. Such versatility of acoustic and optical ‘triggerability’ can potentially improve multi-modality imaging, molecularly targeted imaging and controlled drug release.

  20. Optically and acoustically triggerable sub-micron phase-change contrast agents for enhanced photoacoustic and ultrasound imaging.

    Science.gov (United States)

    Lin, Shengtao; Shah, Anant; Hernández-Gil, Javier; Stanziola, Antonio; Harriss, Bethany I; Matsunaga, Terry O; Long, Nicholas; Bamber, Jeffrey; Tang, Meng-Xing

    2017-06-01

    We demonstrate a versatile phase-change sub-micron contrast agent providing three modes of contrast enhancement: 1) photoacoustic imaging contrast, 2) ultrasound contrast with optical activation, and 3) ultrasound contrast with acoustic activation. This agent, which we name 'Cy-droplet', has the following novel features. It comprises a highly volatile perfluorocarbon for easy versatile activation, and a near-infrared optically absorbing dye chosen to absorb light at a wavelength with good tissue penetration. It is manufactured via a 'microbubble condensation' method. The phase-transition of Cy-droplets can be optically triggered by pulsed-laser illumination, inducing photoacoustic signal and forming stable gas bubbles that are visible with echo-ultrasound in situ . Alternatively, Cy-droplets can be converted to microbubble contrast agents upon acoustic activation with clinical ultrasound. Potentially all modes offer extravascular contrast enhancement because of the sub-micron initial size. Such versatility of acoustic and optical 'triggerability' can potentially improve multi-modality imaging, molecularly targeted imaging and controlled drug release.

  1. X-ray imaging with sub-micron resolution using large-area photon counting detectors Timepix

    Science.gov (United States)

    Dudak, J.; Karch, J.; Holcova, K.; Zemlicka, J.

    2017-12-01

    As X-ray micro-CT became a popular tool for scientific purposes a number of commercially available CT systems have emerged on the market. Micro-CT systems have, therefore, become widely accessible and the number of research laboratories using them constantly increases. However, even when CT scans with spatial resolution of several micrometers can be performed routinely, data acquisition with sub-micron precision remains a complicated task. Issues come mostly from prolongation of the scan time inevitably connected with the use of nano-focus X-ray sources. Long exposure time increases the noise level in the CT projections. Furthermore, considering the sub-micron resolution even effects like source-spot drift, rotation stage wobble or thermal expansion become significant and can negatively affect the data. The use of dark-current free photon counting detectors as X-ray cameras for such applications can limit the issue of increased image noise in the data, however the mechanical stability of the whole system still remains a problem and has to be considered. In this work we evaluate the performance of a micro-CT system equipped with nano-focus X-ray tube and a large area photon counting detector Timepix for scans with effective pixel size bellow one micrometer.

  2. A Nordic Project Project on High Speed Low Power Design in Sub-micron CMOS Technology for Mobile

    DEFF Research Database (Denmark)

    Olesen, Ole

    1997-01-01

    This paper is a survey paper presenting the Nordic CONFRONT project and reporting some results from the group at CIE/DTU, Denmark. The objective of the project is to demonstrate the feasibility of sub-micron CMOS for the realisation of RF front-end circuits operating at frequencies in the 1.......8-2.0 GHz range. The ultimate goal is a single-chip transceiver, requiring only an external band-pass filter between the chip and the antenna. DECT has been chosen as a comparative standard to compare the new approaches developed in the work as well as to facilitate good knowledge transfer to industry. All...... of including good off-chip components in the design by use of innovative, inexpensive package technology.To achieve a higher level of integration, the project will use a novel codesign approach to the design strategy. Rather than making specifications based on a purely architectural approach, the work uses...

  3. Utility of chromatographic and spectroscopic techniques for a detailed characterization of poly(styrene-b-isoprene) miktoarm star copolymers with complex architecture

    KAUST Repository

    Šmigovec Ljubič, Tina

    2012-09-25

    We analyzed various miktoarm star copolymers of the PS(PI) x type (x = 2, 3, 5, 7), which consist of one long polystyrene (PS) arm (82 or 105 kDa) and various numbers of short polyisoprene (PI) arms (from 11.3 to 39.7 kDa), prepared by anionic polymerization and selective chlorosilane chemistry. The length of the PI arm in stars decreases with the number of arms, so that the chemical compositions of all PS(PI) x samples were comparable. Our aim was to determine the purity of samples and to identify exactly the constituents of individual samples. For this purpose we used a variety of separation techniques (size-exclusion chromatography (SEC), reversed-phase liquid-adsorption chromatography (RP-LAC), and two-dimensional liquid chromatography (2D-LC)) and characterization techniques (UV-MALS-RI multidetection SEC system, NMR, and MALDI-TOF MS). The best separation and identification of the samples\\' constituents were achieved by RP-LAC, which separates macromolecules according to their chemical composition, and a subsequent analysis of the off-line collected fractions from the RP-C18 column by SEC/UV-MALS-RI multidetection system. The results showed that all PS(PI) x samples contained the homo-PS and homo-PI in minor amounts and the high-molar-mass (PS) y(PI) z (y > 1) species, the content of which is higher in the samples PS(PI) 5 and PS(PI) 7 than in the samples PS(PI) 2 and PS(PI) 3. The major constituent of the PS(PI) 2 sample was the one with the predicted structure. On the other hand, the major components of the PS(PI) x (x = 3, 5, and 7) samples were the stars consisting of a smaller number of PI arms than predicted from the functionalities of chlorosilane coupling agents. These results are in agreement with the average chemical composition of samples determined by proton NMR spectroscopy and characterization of the constituents by MALDI-TOF MS. © 2012 American Chemical Society.

  4. Time-specific measurements of energy deposition from radiation fields in simulated sub-micron tissue volumes

    Energy Technology Data Exchange (ETDEWEB)

    Famiano, M.A.

    1997-07-07

    A tissue-equivalent spherical proportional counter is used with a modified amplifier system to measure specific energy deposited from a uniform radiation field for short periods of time ({approximately}1 {micro}s to seconds) in order to extrapolate to dose in sub-micron tissue volumes. The energy deposited during these time intervals is compared to biological repair processes occurring within the same intervals after the initial energy deposition. The signal is integrated over a variable collection time which is adjusted with a square-wave pulse. Charge from particle passages is collected on the anode during the period in which the integrator is triggered, and the signal decays quickly to zero after the integrator feedback switch resets; the process repeats for every triggering pulse. Measurements of energy deposited from x rays, {sup 137}Cs gamma rays, and electrons from a {sup 90}Sr/{sup 90}Y source for various time intervals are taken. Spectral characteristics as a function of charge collection time are observed and frequency plots of specific energy and collection time-interval are presented. In addition, a threshold energy flux is selected for each radiation type at which the formation of radicals (based on current measurements) in mammalian cells equals the rate at which radicals are repaired.

  5. Synthesis and characterization of poly(styrene-co-methyl methacrylate); Sintese e caracterizacao do poli(estireno-co-metacrilato de metila)

    Energy Technology Data Exchange (ETDEWEB)

    Augustinho, Tiago R.; Abarca, Silvia A.C.; Machado, Ricardo A.F. [Departamento de Engenharia Quimica e Alimentos - Universidade Federal de Santa Catarina - UFSC, Florianopolis, SC (Brazil)

    2011-07-01

    Polystyrene (PS) is nowadays commonly used due its advantages over competitors. PS presents a lower cost when compared with Acrylonitrile Butadiene Styrene (ABS) and with Polyethylene Tere-phthalate (PET), and can be easier processed than polypropylene (PP). At expandable form (EPS), can be used as projective equipment, thermal insulation, floating boards, refrigerators, isothermal, and low cost applications such as packaging and disposable material. Searching for more resistant materials and with a low cost, researches with copolymers materials are being developed. In this study, copolymerization reactions were carried out by suspension polymerization using monomers styrene and methyl methacrylate (MMA) with styrene. Styrene was in the highest percentage in relation to the MMA. The MMA was selected because is a monomer that presents a higher resistance than PS. The copolymerization was confirmed by performing infrared spectroscopy (IR), nuclear magnetic resonance of hydrogen (RMN{sup 1}H), differential scanning calorimetry (DSC) and thermogravimetry (TGA). (author)

  6. Fabrication of a high-aspect-ratio sub-micron tool using a cathode coated with stretched-out insulating layers

    Science.gov (United States)

    Zeng, Yongbin; Wang, Yufeng; Qu, Ningsong; Zhu, Di

    2013-09-01

    This paper describes a method for preparing a high-aspect-ratio sub-micron tool using a cathode coated with stretched-out insulating layers and a straight reciprocating motion applied at the anode via the liquid membrane electrochemical machining (ECM). Simulation results indicate that the application of a cathode coated with stretched-out insulating layers is beneficial for the localization of ECM. Moreover, a mathematical model was derived to estimate the final average diameter of the fabricated tools. Experiments were conducted to verify the versatility and feasibility of the proposed method and its mathematical model. It was observed that the calculated and the experimental results are in good agreement with each other. A sub-micron tool with an average diameter 140.8 nm and an aspect ratio up to 50 was fabricated using the proposed method.

  7. SiO2/ZnO Composite Hollow Sub-Micron Fibers: Fabrication from Facile Single Capillary Electrospinning and Their Photoluminescence Properties.

    Science.gov (United States)

    Song, Guanying; Li, Zhenjiang; Li, Kaihua; Zhang, Lina; Meng, Alan

    2017-02-24

    In this work, SiO2/ZnO composite hollow sub-micron fibers were fabricated by a facile single capillary electrospinning technique followed by calcination, using tetraethyl orthosilicate (TEOS), polyvinylpyrrolidone (PVP) and ZnO nanoparticles as raw materials. The characterization results of the scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) spectra indicated that the asprepared composite hollow fibers consisted of amorphous SiO2 and hexagonal wurtzite ZnO. The products revealed uniform tubular structure with outer diameters of 400-500 nm and wall thickness of 50-60 nm. The gases generated and the directional escaped mechanism was proposed to illustrate the formation of SiO2/ZnO composite hollow sub-micron fibers. Furthermore, a broad blue emission band was observed in the photoluminescence (PL) of SiO2/ZnO composite hollow sub-micron fibers, exhibiting great potential applications as blue light-emitting candidate materials.

  8. SiO2/ZnO Composite Hollow Sub-Micron Fibers: Fabrication from Facile Single Capillary Electrospinning and Their Photoluminescence Properties

    Directory of Open Access Journals (Sweden)

    Guanying Song

    2017-02-01

    Full Text Available In this work, SiO2/ZnO composite hollow sub-micron fibers were fabricated by a facile single capillary electrospinning technique followed by calcination, using tetraethyl orthosilicate (TEOS, polyvinylpyrrolidone (PVP and ZnO nanoparticles as raw materials. The characterization results of the scanning electron microscopy (SEM, transmission electron microscopy (TEM, X-ray diffraction (XRD and Fourier transform infrared spectroscopy (FT-IR spectra indicated that the asprepared composite hollow fibers consisted of amorphous SiO2 and hexagonal wurtzite ZnO. The products revealed uniform tubular structure with outer diameters of 400–500 nm and wall thickness of 50–60 nm. The gases generated and the directional escaped mechanism was proposed to illustrate the formation of SiO2/ZnO composite hollow sub-micron fibers. Furthermore, a broad blue emission band was observed in the photoluminescence (PL of SiO2/ZnO composite hollow sub-micron fibers, exhibiting great potential applications as blue light-emitting candidate materials.

  9. Phase morphological study on SEBS compatibilized PS/LDPE blends

    Directory of Open Access Journals (Sweden)

    Chatchai Kunyawut

    2014-09-01

    Full Text Available The co-continuous phase morphology of polystyrene (PS/low density polyethylene (LDPE blends compatibilized with poly(styrene-block-ethylene/butylene-block-styrene triblock copolymers (SEBS with varying molecular weights has been investigated. The blend samples were prepared in a mini-twin screw extruder. The barrel length and diameter are 224 and 16 mm, respectively. The diameter of the capillary die is 1 mm. The concentration of the blends was 70/30 wt% of PS/LDPE while that of the SEBS used was 5 wt% of the blend. The mixing temperatures used were 180, 250, and 280o C, and a screw speed of 60 rpm. The morphology of the blends was investigated using an AFM technique. Average droplet diameters of the blend samples were determined using an OM technique. The co-continuous morphology has not been obtained in all the blends, although the mixing temperature used is as high as 280o C. The experimental results indicated that the model prediction of the co-continuous morphology proposed by Willemse and co-worker was not applicable to the blend systems studied. Only droplet-type dispersion was observed. This is considered to arise from the processing conditions and the mixing device used. The blend compatibilized with the high molecular weight SEBS had higher dispersed phase size than that of the blend compatibilized with the medium and low molecular weight SEBSs. This behaviour is likely to arise from coalescence during melt processing.

  10. Trends and sources of ozone and sub-micron aerosols at the Mt. Bachelor Observatory during 2004-2015

    Science.gov (United States)

    Zhang, L.; Jaffe, D. A.; Hee, J.

    2016-12-01

    Tropospheric ozone (O3) and airborne particles have significant impacts on human health and the environment. The Mt. Bachelor Observatory (MBO, 2.8 km a.s.l.) in Central Oregon, USA, now has one of the longest continuous free tropospheric records of O3, CO and aerosols in North America. In this study, we report on sources and trends of O3 and sub-micron aerosol scattering at MBO for 2004-2015. For O3, the seasonal cycle shows a bimodal pattern with peaks in April and July, while aerosol scattering (σsp) is lognormally distributed with a very high average in August and a smaller maximum in May. Mean O3 concentrations show a positive and significant trend in all seasons except winter, with an increase of approximately 0.6 ppb/year. This trend appears to be driven by Asian pollution in spring and regional wildfires in summer. For aerosol scattering, we see a significant increase only in summer, driven by recent increases in wildfire activity in the western US. Monthly criteria for isolating free troposphere (FT) and boundary layer (BL) air masses at MBO were obtained based on comparison of MBO water vapor (WV) distributions to those of Salem (SLE) and Medford (MFR), Oregon at equivalent pressure level. In all seasons, FT O3 is, on average, higher than BL O3, but the seasonal patterns are rather similar. For σsp the mean in summer is significantly higher than the FT, indicating the importance of regional wildfire smoke. We have identified four types of air masses that impact O3, CO and aerosols: Asian long range transport (ALRT), regional wildfires, regional industrial pollution, and upper troposphere and lower stratosphere (UTLS) intrusions. Over the 12 years of observations, we have identified 204 individual plume events based on the criteria of 8 consecutive polluted hours with elevated σsp, O3 or CO. Multi-pollutant correlations and backward trajectories were used to differentiate background source categories. A series of enhancement ratios (ERs) including

  11. Trends and sources of ozone and sub-micron aerosols at the Mt. Bachelor Observatory (MBO) during 2004-2015

    Science.gov (United States)

    Zhang, Lei; Jaffe, Daniel A.

    2017-09-01

    In this paper, we report the climatology of tropospheric ozone (O3) and sub-micron aerosol scattering at the Mt. Bachelor Observatory (MBO, 2.8 km asl) in central Oregon, USA, during 2004-2015. The seasonal cycle for O3 showed a bimodal pattern with peaks in April and July, while aerosol scattering (σsp) was lognormally distributed with a very high peak in August and a smaller peak in May. The mean O3 concentrations showed positive and significant trends in all seasons except winter, with a slope of 0.6-0.8 ppbv yr-1. Monthly criteria for isolating free tropospheric (FT) and boundary layer influenced (BLI) air masses at MBO were obtained based on comparison of MBO water vapor (WV) distributions to those of Salem (SLE) and Medford (MFR), Oregon, at equivalent pressure level. In all seasons, FT O3 was, on average, higher than BLI O3, but the seasonal patterns were rather similar. For σsp the FT mean in spring was higher, but the BLI mean in summer was significantly higher, indicating the importance of regional wildfire smoke. To better understand the causes for the seasonal and interannual trends at MBO, we identified four major categories of air masses that impact O3, carbon monoxide (CO) and aerosols: upper troposphere and lower stratosphere (UTLS) O3 intrusion, Asian long-range transport (ALRT), Arctic air pollution (AAP) and plumes from the Pacific Northwest region (PNW). ALRT and PNW plumes can be further divided into wildfires (WF), industrial pollution (IP) and mineral dust (MD). Over the 12 years of observations, 177 individual plume events have been identified. Enhancement ratios (ERs) and Ångström exponents (AEs) of aerosols were calculated for all events. The lowest slope of Δσsp/ΔO3 is a unique feature of UTLS events. PNW-WF events have the highest averages for Δσsp/ΔCO, Δσsp/ΔO3 and Δσsp/ΔNOy compared to other events. These ERs decrease during long-range transport due to the shorter residence time of aerosols compared to the other

  12. Effect of alcohol vapor treatment on electrical and optical properties of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) films for indium tin oxide-free organic light-emitting diodes

    Science.gov (United States)

    Fallahzadeh, Ali; Saghaei, Jaber; Yousefi, Mohammad Hassan

    2014-11-01

    A simple alcohol vapor treatment (AVT) technique was proposed to improve the conductivity of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films. In this technique, various alcohols, i.e. methanol, ethanol, 2-propanol and ethylene glycol, were applied to treat the surface of the films formed and then they were annealed. The sheet resistance of PEDOT:PSS films was significantly reduced from 130 kΩ/sq to 60 Ω/sq when treated with methanol vapor. The investigation of the vertical resistance of the films showed that the sample treated with methanol vapor displayed the lowest resistance as well. The mechanism of conductivity enhancement of PEDOT:PSS films through AVT method was explained by surface phase images, UV and IR spectra of PEDOT:PSS films. Optical transmittance spectrum of treated films exhibited that AVT has even enhanced the optical transmittance slightly. Improvement in the morphology, electrical and optical properties of PEDOT:PSS films prompted their applications as a transparent anode in the fabrication of ITO-free organic light-emitting diodes (OLEDs). The OLED manufactured based on methanol-treated PEDOT:PSS films demonstrated the highest luminance.

  13. Direct methanol fuel cell based on poly(vinyl alcohol)/titanium oxide nanotubes/poly(styrene sulfonic acid) (PVA/nt-TiO 2/PSSA) composite polymer membrane

    Science.gov (United States)

    Yang, Chun-Chen; Chien, Wen-Chen; Li, Yingjeng James

    The high performance poly(vinyl alcohol)/titanium oxide nanotubes/poly(styrene sulfonic acid) (PVA/nt-TiO 2/PSSA) proton-conducting composite membrane is prepared by a solution casting method. The characteristic properties of these blend composite membranes are investigated by thermal gravimetric analysis (TGA), scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX), micro-Raman spectroscopy, dynamic mechanical analysis (DMA), methanol permeability measurement and AC impedance method. It is found that the peak power densities of the DMFC with 1, 2, and 4 M CH 3OH fuels are 12.85, 23.72, and 10.99 mW cm -2, respectively, at room temperature and ambient air. Especially, among three methanol concentrations, the 2 M methanol shows the highest peak power density among three methanol concentrations. The results indicate that the air-breathing direct methanol fuel cell comprised of a novel PVA/nt-TiO 2/PSSA composite polymer membrane has excellent electrochemical performance and stands out as a viable candidate for applications in DMFC.

  14. Comparative study of the self-aggregation of rhodamine 6G in the presence of poly(sodium 4-styrenesulfonate), poly(N-phenylmaleimide-co-acrylic acid), poly(styrene-alt-maleic acid), and poly(sodium acrylate).

    Science.gov (United States)

    Moreno-Villoslada, Ignacio; Fuenzalida, Juan Pablo; Tripailaf, Gustavo; Araya-Hermosilla, Rodrigo; Pizarro, Guadalupe del C; Marambio, Oscar Guillermo; Nishide, Hiroyuki

    2010-09-23

    The interaction between rhodamine 6G and different polyelectrolytes is analyzed. Structural aspects differentiate these polyelectrolytes, such as the presence of aromatic groups and the number and localization of their respective charges, which may be directly attached to the aromatic groups or to the polymeric main chain. In the case of poly(sodium acrylate), which does not bear aromatic groups, the polyelectrolyte induces cooperative self-stacking between the dyes which is highly sensitive to the ionic strength, due to the predominance of long-range electrostatic interactions between the polymer and the dye. In the case of poly(sodium 4-styrenesulfonate), whose charge is directly attached to the aromatic groups, a high dispersant ability of the dyes is found and the interaction is less dependent on the ionic strength, due to the predominance of short-range aromatic-aromatic interactions between the dye and the polymer. Among the two polyelectrolytes studied for which the polymeric charge is directly attached to the main chain, and separated from the aromatic group, poly(styrene-alt-maleic acid) shows a lower dependence of the interaction on the ionic strength than poly(N-phenylmaleimide-co-acrylic acid) at a comonomer composition of 1:2, due to a higher linear aromatic density and a lower linear charge density, indicating the importance of hydrophobic forces. Both copolymers exhibit a high ability to induce cooperative self-aggregation of the dye.

  15. Development of graphene oxide/poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) thin film-based electrochemical surface plasmon resonance immunosensor for detection of human immunoglobulin G

    Science.gov (United States)

    Pothipor, Chammari; Lertvachirapaiboon, Chutiparn; Shinbo, Kazunari; Kato, Keizo; Kaneko, Futao; Ounnunkad, Kontad; Baba, Akira

    2018-02-01

    An electrochemically synthesized graphene oxide (GO)/poly(3,4-ethylenedioxythiophene) (PEDOT)/poly(styrene sulfonate) (PSS) thin film-based electrochemical surface plasmon resonance (EC-SPR) sensor chip was developed and employed for the detection of human immunoglobulin G (IgG). GO introduced the carboxylic group on the film surface, which also allowed electrochemical control, for the immobilization of the anti-IgG antibody via covalent bonding through amide coupling reaction. The SPR sensitivity of the detection was improved under the control by applying an electrochemical potential, by which the sensitivity was increased by the increment in applied potential. Among the open-circuit and different applied potentials in the range of ‑1.0 to 0.50 V, the EC-SPR immunosensor at an applied potential of 0.50 V exhibited the highest sensitivity of 6.08 × 10‑3 mL µg‑1 cm‑2 and linearity in the human IgG concentration range of 1.0 to 10 µg mL‑1 with a relatively low detection limit of 0.35 µg mL‑1. The proposed sensor chip is promising for immunosensing at the physiological level.

  16. Separation and recovery of lead from a low concentration solution of lead(II) and zinc(II) using the hydrolysis production of poly styrene-co-maleic anhydride.

    Science.gov (United States)

    Liang, Xing; Su, Yibing; Yang, Ying; Qin, Wenwu

    2012-02-15

    The PbZn separation/preconcentration technique, based on the complex formation reaction of Pb(II) and Zn(II), using a copolymer poly(styrene-co-maleic anhydride) (PSMA), without adding any carrier element was developed. The effects of several experimental parameters such as solution pH, temperature and adsorption time were studied. The experimental results show that the PSMA resin-Pb equilibrium was achieved in 2 min and the Pb(II) loading capacity is up to 641.62 mg g(-1) in aqueous solution under optimum conditions, which is much higher than the Zn(II) loading capacity within 80 min. The adsorption test for Pb(II) indicates that PSMA can recover Pb(II) from a mixed solution of Pb(II), Zn(II) and light metals such as Ca(II) and Mg(II) with higher adsorption rate and larger selective coefficient. A further study indicates that PSMA as chelating resins recovering Pb(II) can be regenerated via mineral acid (6M H(2)SO(4)). PSMA was synthesized by radical polymerization and tested as an adsorbent for the selective recovery of Pb(II). In addition, the formation procedure and structure of Pb-PSMA complex were also studied. Both the PSMA and the Pb-PSMA complex were characterized by means of FTIR spectroscopy, elemental analysis, gel permeation chromatography (GPC) and atomic absorption spectrometry (AAS). Copyright © 2011 Elsevier B.V. All rights reserved.

  17. Reduction of ethylenediaminetetraacetic acid iron(III) by Klebsiella sp. FD-3 immobilized on iron(II, III) oxide poly (styrene-glycidyl methacrylate) magnetic porous microspheres: effects of inorganic compounds and kinetic study of effective diffusion in porous media.

    Science.gov (United States)

    Zhou, Zuo-Ming; Wang, Xiao-Yan; Lin, Tian-Ming; Jing, Guo-Hua

    2014-11-01

    Fe3O4 poly (styrene-glycidyl methacrylate) magnetic porous microspheres (MPPMs) were introduced to immobilize Klebsiella sp. FD-3, an iron-reducing bacterium applied to reduce Fe(III)EDTA. The effects of potential inhibitors (S(2-), SO3(2-), NO3(-), NO2(-) and Fe(II)EDTA-NO) on Fe(III)EDTA reduction were investigated. S(2-) reacted with Fe(III)EDTA as an electron-shuttling compound and enhanced the reduction. But Fe(III)EDTA reduction was inhibited by SO3(2-) and Fe(II)EDTA-NO due to their toxic to microorganisms. Low concentrations of NO3(-) and NO2(-) accelerated Fe(III)EDTA reduction, but high concentrations inhibited the reduction, whether by free or immobilized FD-3. The immobilized FD-3 performed better than freely-suspended style. The substrate mass transfer and diffusion kinetics in the porous microspheres were calculated. The value of Thiele modulus and effectiveness factors showed that the intraparticle diffusion was fairly small and neglected in this carrier. Fe(III)EDTA reduction fitted first-order model at low Fe(III)EDTA concentration, and changed to zero-order model at high concentrations. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Poly(styrene-b-2-(N,N-dimethylamino)ethyl methacrylate) diblock copolymers: Micellization and application in the synthesis of photoluminescent CdS nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Basu, Saswati; Mondal, Samiran [Department of Chemistry, Visva-Bharati University, Santiniketan 731 235 (India); Chatterjee, Uma, E-mail: uma_cin@yahoo.co.in [Polymer Science Unit, Indian Association for the Cultivation of Sciences, Kolkata 700 032 (India); Mandal, Debabrata, E-mail: dmandal.chemistry@gmail.com [Department of Chemistry, Visva-Bharati University, Santiniketan 731 235 (India)

    2009-08-15

    Fluorescence studies on amphiphilic diblock copolymers of styrene and 2-(N,N-dimethylamino)ethyl methacrylate using 1,8-anilinonaphthalenesulfonate (ANS) as fluorescent probe revealed the formation of stable micelles at extremely low polymer concentrations of {approx}0.05%. The micellar microenvironment was characterized by an average polarity of E{sub T}(30) = 44-48 kcal mol{sup -1}, similar to the moderately polar solvents, and extremely high microviscosity. Increase in hydrophilic: hydrophobic ratio of the copolymers resulted in an increase in the average polarity and decrease in microviscosity. The micelles proved to be excellent hosts for the synthesis and stabilization of photoluminescent CdS nanoparticles with a high degree of quantum confinement and broad photoluminescence, dominated by trap-state emission. Moreover, the size and size-related steady-state optical properties of CdS nanoparticles were significantly dependent on the microenvironment of the host micelle. In contrast, the photoluminescence dynamics of the nanoparticles, involving time-scales from 100 ps to 100 ns, are similar in all cases. Interestingly, the nanoparticles exhibit a large time-dependent Stokes shift, 75% of which is complete within the first {approx}100 ps after the excitation. The extremely rapid Stokes shift is attributed to the decay of the initially formed band-edge excitons in a time-scale too fast to be affected by the microenvironment surrounding the particle.

  19. Spectroscopic and magnetic properties of neodymium doped in GdPO{sub 4} sub-micron-stars prepared by solvothermal method

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, G.A., E-mail: ajith@gakumar.net [Department of Physics and Astronomy, University of Texas at San Antonio, San Antonio, TX, 78249 (United States); Balli, Nicolas R. [Department of Physics and Astronomy, University of Texas at San Antonio, San Antonio, TX, 78249 (United States); Kailasnath, M. [International School of Photonics, Cochin University of Science and Technology, Kochi, 682022 (India); Mimun, L. Christopher [Department of Physics and Astronomy, University of Texas at San Antonio, San Antonio, TX, 78249 (United States); Dannangoda, Chamath; Martirosyan, Karen S. [University of Texas at Rio Grande Valley, Brownsville, TX, 78520 (United States); Santhosh, C. [Department of Atomic and Molecular Spectroscopy, Manipal University, Manipal, 576104 (India); Sardar, Dhiraj K. [Department of Physics and Astronomy, University of Texas at San Antonio, San Antonio, TX, 78249 (United States)

    2016-07-05

    Neodymium-doped gadolinium orthophosphate (GdPO{sub 4}:Nd{sup 3+}) luminomagnetic sub-micron-stars were prepared by solvothermal method using metal nitrates and phosphoric acid. Monoclinic star shaped in six lobed sub-micron-stars with 600 nm length is obtained with uniform particle size distribution. After heat-treatment at 800 °C for 1 h in air, the stars separate into isolated petal shaped particles and show characteristic emission bands of Nd{sup 3+} with the strongest emission at 1064 nm. The emission intensities and fluorescence decay times are dependent on the Nd{sup 3+} concentration with the highest emission intensity and longest fluorescence decay time of 311 μs at 1064 nm with 0.5 mol% Nd{sup 3+}. Under 808 nm excitation with 12 W/cm{sup 2} power density a quantum yield of 9% was obtained for the 1.0 mol% Nd{sup 3+}. The presence of paramagnetic Gd{sup 3+} gives magnetic properties to the phosphor with a calculated magnetic moment of 1510 and 107,965 Bohr magneton at 300 and 5 K, respectively. - Highlights: • Star shaped Nd doped GdPO{sub 4} sub-micron phosphor particles are prepared for the first time. • Particles show both optical and magnetic properties. • Under 808 nm excitation near infrared emission was observed at 1064 nm with 9% quantum yield. • Magnetic moment of the particle was 1510 and 107,965 Bohr magneton at 300 and 5 K, respectively.

  20. Synthesis of TiO{sub 2} nanoparticles by self-assembling reverse micelle cores of PS-b-PAA for functional textile applications

    Energy Technology Data Exchange (ETDEWEB)

    Akpolat, Leyla Budama; Çakır, Burçin Acar; Topel, Önder, E-mail: ondertopel@akdeniz.edu.tr; Hoda, Numan, E-mail: nhoda@akdeniz.edu.tr

    2015-04-15

    Highlights: • TiO{sub 2} nanoparticles were synthesized within poly(styrene)-b-poly(acrylic acid) micelles. • The copolymer solution including nano TiO{sub 2} was coated onto textile fabrics. • UV-protective factor of nano TiO{sub 2} coated fabrics was estimated as 50+. • Nano TiO{sub 2} coated fabrics was found to exhibit a high photocatalytic activity. - Abstract: Titanium dioxide (i.e., titanium(IV) oxide, TiO{sub 2}) nanoparticles have been fabricated using a copolymer templating technique in micellar solution of poly(styrene)-block-poly(acrylic acid), PS(10912)-b-PAA(4842) synthesized by atom transfer radical polymerization (ATRP). The size and morphology of the synthesized TiO{sub 2} nanoparticles have been characterized via TEM and XRD measurements. The average size of TiO{sub 2} nanoparticles was determined as 13 ± 3 and 13 ± 4 nm for titanium:copolymer ratios of 20:1 and 33:1, respectively. The copolymer solution including nano TiO{sub 2} particles has been coated onto textile fabrics to enhance their UV-blocking and self-cleaning properties. It has been determined that nano TiO{sub 2} coated textile fabrics have very good UV-blocking properties with 50+ of the ultraviolet protecting factor (UPF) and high photocatalytic efficiency with 69.2% of the photodegradation of methylene blue.

  1. Local thermomechanical analysis of a microphase-separated thin lamellar PS-b-PEO film.

    Science.gov (United States)

    Rice, Reginald H; Mokarian-Tabari, Parvaneh; King, William P; Szoszkiewicz, Robert

    2012-09-18

    We use atomic force microscopy (AFM) and hot tip AFM (HT-AFM) to thermophysically characterize a 30 nm thick film of poly(styrene-block-ethylene oxide), PS-b-PEO, and to modify its lamellar patterns having spacing of 39 ± 3 nm. AFM tip scans of the polymer film induce either abrasive surface patterns or nanoscale ripples, which depend upon the tip force, temperature, and number of scans. The evolution of the lamellar patterns is explained by the polymer film molecular structure and mode I crack propagation in the polymer combined with the stick-and-slip behavior of the AFM tip. The HT-AFM measurements at various tip-sample temperatures and scanning speeds yield several thermophysical quantities: the PEO melting temperature of 54 ± 12 °C, the PS glass transition temperature of 54 ± 12 °C, the PS-b-PEO specific heat of 3.6 ± 2.7 J g(-1) K(-1), the PEO melting enthalpy of 111 ± 88 J g(-1), and the free energy of Helmholtz for PEO unfolding (and melting) of 10(-20) J nm(-2). These quantities are obtained for PS-b-PEO volumes of 30,000 nm(3), which correspond to 30 ag of the polymer.

  2. Volume shrinkage and rheological studies of epoxidised and unepoxidised poly(styrene-block-butadiene-block-styrene) triblock copolymer modified epoxy resin-diamino diphenyl methane nanostructured blend systems.

    Science.gov (United States)

    George, Sajeev Martin; Puglia, Debora; Kenny, Josè M; Parameswaranpillai, Jyotishkumar; Vijayan P, Poornima; Pionteck, Jűrgen; Thomas, Sabu

    2015-05-21

    Styrene-block-butadiene-block-styrene (SBS) copolymers epoxidised at different epoxidation degrees were used as modifiers for diglycidyl ether of the bisphenol A-diamino diphenyl methane (DGEBA-DDM) system. Epoxy systems containing modified epoxidised styrene-block-butadiene-block-styrene (eSBS) triblock copolymer with compositions ranging from 0 to 30 wt% were prepared and the curing reaction was monitored in situ using rheometry and pressure-volume-temperature (PVT) analysis. By controlling the mole percent of epoxidation, we could generate vesicles, worm-like micelles and core-shell nanodomains. At the highest mole percent of epoxidation, the fraction of the epoxy miscible component in the triblock copolymer (epoxidised polybutadiene (PB)) was maximum. This gave rise to core-shell nanodomains having a size of 10-15 nm, in which the incompatible polystyrene (PS) becomes the core, the unepoxidised PB becomes the shell and the epoxidised PB interpenetrates with the epoxy phase. On the other hand, the low level of epoxidation gave rise to bigger domains having a size of ∼1 μm and the intermediate epoxidation level resulted in a worm-like structure. This investigation specifically focused on the importance of cure rheology on nanostructure formation, using rheometry. The reaction induced phase separation of the PS phase in the epoxy matrix was carefully explored through rheological measurements. PVT measurements during curing were carried out to understand the volume shrinkage of the blend, confirming that shrinkage behaviour is related to the block copolymer phase separation process during curing. The volume shrinkage was found to be maximum in the case of blends with unmodified SBS, where a heterogeneous morphology was observed, while a decrease in the shrinkage was evidenced in the case of SBS epoxidation. It could be explained by two effects: (1) solubility of the epoxidised block copolymer in the DGEBA leads to the formation of nanoscopic domains upon

  3. Hydrothermal Synthesis Au-Bi2Te3 Nanocomposite Thermoelectric Film with a Hierarchical Sub-Micron Antireflection Quasi-Periodic Structure

    Directory of Open Access Journals (Sweden)

    Junlong Tian

    2015-06-01

    Full Text Available In this work, Au-Bi2Te3 nanocomposite thermoelectric film with a hierarchical sub-micron antireflection quasi-periodic structure was synthesized via a low-temperature chemical route using Troides helena (Linnaeus forewing (T_FW as the biomimetic template. This method combines chemosynthesis with biomimetic techniques, without the requirement of expensive equipment and energy intensive processes. The microstructure and the morphology of the Au-Bi2Te3 nanocomposite thermoelectric film was analyzed by X-ray diffraction (XRD, field-emission scanning-electron microscopy (FESEM, and transmission electron microscopy (TEM. Coupled the plasmon resonances of the Au nanoparticles with the hierarchical sub-micron antireflection quasi-periodic structure, the Au-Bi2Te3 nanocomposite thermoelectric film possesses an effective infrared absorption and infrared photothermal conversion performance. Based on the finite difference time domain method and the Joule effect, the heat generation and the heat source density distribution of the Au-Bi2Te3 nanocomposite thermoelectric film were studied. The heterogeneity of heat source density distribution of the Au-Bi2Te3 nanocomposite thermoelectric film opens up a novel promising technique for generating thermoelectric power under illumination.

  4. Sub-micron resolution surface plasmon resonance imaging enabled by nanohole arrays with surrounding Bragg mirrors for enhanced sensitivity and isolation.

    Science.gov (United States)

    Lindquist, Nathan C; Lesuffleur, Antoine; Im, Hyungsoon; Oh, Sang-Hyun

    2009-02-07

    We present nanohole arrays in thin gold films as sub-micron resolution surface plasmon resonance (SPR) imaging pixels in a microarray format. With SPR imaging, the resolution is not limited by diffraction, but by the propagation of surface plasmon waves to adjacent sensing areas, or nanohole arrays, causing unwanted interference. For ultimate scalability, several issues need to be addressed, including: (1) as several nanohole arrays are brought close to each other, surface plasmon interference introduces large sources of error; and (2) as the size of the nanohole array is reduced, i.e. fewer holes, detection sensitivity suffers. To address these scalability issues, we surround each biosensing pixel (a 3-by-3 nanohole array) with plasmonic Bragg mirrors, blocking interference between adjacent SPR sensing pixels for high-density packing, while maintaining the sensitivity of a 50 x larger footprint pixel (a 16-by-16 nanohole array). We measure real-time, label-free streptavidin-biotin binding kinetics with a microarray of 600 sub-micron biosensing pixels at a packing density of more than 10(7) per cm(2).

  5. A Novel Step-Doping Fully-Depleted Silicon-on-Insulator Metal-Oxide-Semiconductor Field-Effect Transistor for Reliable Deep Sub-micron Devices

    Science.gov (United States)

    Elahipanah, Hossein; Orouji, Ali A.

    2009-11-01

    For first time, we report a novel deep sub-micron fully-depleted silicon-on-insulator metal-oxide-semiconductor field-effect-transistor (FD SOI MOSFET) where the channel layer consists of two sections with a step doping (SD) region in order to increase performance and reliability of the device. This new structure that called SD FD SOI structure (SDFD-SOI MOSFET), were used for reaching suitable threshold voltage upon device scaling and reliability improvement. We demonstrate that the electric field was modified in the channel and common peak near the source junction have been reduced in the SDFD-SOI structure. The device demonstrates large enhancements in performance areas such as current drive capability, output resistance, hot-carrier reliability and threshold voltage roll-off. It was found that the device performance is very much dependent upon the SD region parameters. Simulation results show that the proposed structure improved on/off current ratio, and saturated output characteristics compared with conventional SOI structure (C-SOI MOSFET). Also, it was shown that substrate current of SDFD-SOI MOSFET is much lower than the C-SOI MOSFET which presented the lower hot-carrier degradation in proposed MOSFET. Results show that the most short-channel problems in very large scale integrated circuits (VLSI) could be solved and the proposed SDFD-SOI MOSFETs can work very well in deep sub-micron and nanoscale regime.

  6. Significant vertical phase separation in solvent-vapor-annealed poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) composite films leading to better conductivity and work function for high-performance indium tin oxide-free optoelectronics.

    Science.gov (United States)

    Yeo, Jun-Seok; Yun, Jin-Mun; Kim, Dong-Yu; Park, Sungjun; Kim, Seok-Soon; Yoon, Myung-Han; Kim, Tae-Wook; Na, Seok-In

    2012-05-01

    In the present study, a novel polar-solvent vapor annealing (PSVA) was used to induce a significant structural rearrangement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films in order to improve their electrical conductivity and work function. The effects of polar-solvent vapor annealing on PEDOT:PSS were systematically compared with those of a conventional solvent additive method (SAM) and investigated in detail by analyzing the changes in conductivity, morphology, top and bottom surface composition, conformational PEDOT chains, and work function. The results confirmed that PSVA induces significant phase separation between excess PSS and PEDOT chains and a spontaneous formation of a highly enriched PSS layer on the top surface of the PEDOT:PSS polymer blend, which in turn leads to better 3-dimensional connections between the conducting PEDOT chains and higher work function. The resultant PSVA-treated PEDOT:PSS anode films exhibited a significantly enhanced conductivity of up to 1057 S cm(-1) and a tunable high work function of up to 5.35 eV. The PSVA-treated PEDOT:PSS films were employed as transparent anodes in polymer light-emitting diodes (PLEDs) and polymer solar cells (PSCs). The cell performances of organic optoelectronic devices with the PSVA-treated PEDOT:PSS anodes were further improved due to the significant vertical phase separation and the self-organized PSS top surface in PSVA-treated PEDOT:PSS films, which can increase the anode conductivity and work function and allow the direct formation of a functional buffer layer between the active layer and the polymeric electrode. The results of the present study will allow better use and understanding of polymeric-blend materials and will further advance the realization of high-performance indium tin oxide (ITO)-free organic electronics.

  7. Síntese de poliestireno sulfonado para aplicações no tratamento de água produzido a partir de copos e bandejas descartadas de poliestireno Synthesis of poly(styrene sulfonate from discarded polystyrene cups and expanded trays for application on water treatment

    Directory of Open Access Journals (Sweden)

    Guimes Rodrigues Filho

    2008-01-01

    Full Text Available In the present paper, the use of poly(styrene sulfonate (PSS, produced from discarded polystyrene materials through heterogeneous and homogeneous processes, was investigated. The use of PSS for water treatment, using a kaolin suspension as wastewater model, reduced water turbidity for all the employed materials when compared to the blank analysis, without PSS. The most efficient polyelectrolyte was PSS cups obtained by homogeneous route. The same behavior was observed for real system. The homogeneous PSS cups showed a balance between a moderate molecular weight and high anionic character that improved flocks formation and water removal turbidity.

  8. Source apportionment of fine PM and sub-micron particle number concentrations at a regional background site in the western Mediterranean: a 2.5 year study

    Directory of Open Access Journals (Sweden)

    M. Cusack

    2013-05-01

    Full Text Available The chemical composition and sources of ambient fine particulate matter (PM1 over a period of 2.5 years for a regional background site in the western Mediterranean are presented in this work. Furthermore, sub-micron particle number concentrations and the sources of these particles are also presented. The mean PM1 concentration for the measurement period was 8.9 μg m−3, with organic matter (OM and sulphate comprising most of the mass (3.2 and 1.5 μg m−3 respectively. Six sources were identified in PM1 by Positive Matrix Factorisation (PMF: secondary organic aerosol, secondary nitrate, industrial, traffic + biomass burning, fuel oil combustion and secondary sulphate. Typically anthropogenic sources displayed elevated concentrations during the week with reductions at weekends. Nitrate levels were elevated in winter and negligible in summer, whereas secondary sulphate levels underwent a contrasting seasonal evolution with highest concentrations in summer, similar to the fuel oil combustion source. The SOA source was influenced by episodes of sustained pollution as a result of anticyclonic conditions occurring during winter, giving rise to thermal inversions and the accumulation of pollutants in the mixing layer. Increased levels in summer were owing to higher biogenic emissions and regional recirculation of air masses. The industrial source decreased in August due to decreased emissions during the vacation period. Increases in the traffic + biomass burning source were recorded in January, April and October, which were attributed to the occurrence of the aforementioned pollution episodes and local biomass burning emission sources, which include agriculture and domestic heating systems. Average particle number concentrations (N9-825 nm from 5/11/2010 to 01/06/2011 and from 15/10/2011 to 18/12/2011 reached 3097 cm−3. Five emission sources of particle of sub-micron particles were determined by Principal Component Analysis (PCA; industrial

  9. Image-Guided Ultrasound Characterization of Volatile Sub-Micron Phase-Shift Droplets in the 20-40 MHz Frequency Range.

    Science.gov (United States)

    Sheeran, Paul S; Daghighi, Yasaman; Yoo, Kimoon; Williams, Ross; Cherin, Emmanuel; Foster, F Stuart; Burns, Peter N

    2016-03-01

    Phase-shift perfluorocarbon droplets are designed to convert from the liquid to the gas state by the external application of acoustic or optical energy. Although droplet vaporization has been investigated extensively at ultrasonic frequencies between 1 and 10 MHz, few studies have characterized performance at the higher frequencies commonly used in small animal imaging. In this study, we use standard B-mode imaging sequences on a pre-clinical ultrasound platform to both image and activate sub-micron decafluorobutane droplet populations in vitro and in vivo at center frequencies in the range of 20-40 MHz. Results show that droplets remain stable against vaporization at low imaging pressures but are vaporized at peak negative pressures near 3.5 MPa at the three frequencies tested. This study also found that a small number of size outliers present in the distribution can greatly influence droplet performance. Removal of these outliers results in a more accurate assessment of the vaporization threshold and produces free-flowing microbubbles upon vaporization in the mouse kidney. Copyright © 2016 World Federation for Ultrasound in Medicine & Biology. Published by Elsevier Inc. All rights reserved.

  10. A Fast, Versatile Nanoprobe for Complex Materials: The Sub-micron Resolution X-ray Spectroscopy Beamline at NSLS-II (491st Brookhaven Lecture)

    Energy Technology Data Exchange (ETDEWEB)

    Thieme, Juergen [BNL Photon Sciences Directorate

    2014-02-06

    Time is money and for scientists who need to collect data at research facilities like Brookhaven Lab’s National Synchrotron Light Source (NSLS), “beamtime” can be a precious commodity. While scanning a complex material with a specific technique and standard equipment today would take days to complete, researchers preparing to use brighter x-rays and the new sub-micron-resolution x-ray spectroscopy (SRX) beamline at the National Synchrotron Light Source II (NSLS-II) could scan the same sample in greater detail with just a few hours of beamtime. Talk about savings and new opportunities for researchers! Users will rely on these tools for locating trace elements in contaminated soils, developing processes for nanoparticles to deliver medical treatments, and much more. Dr. Thieme explains benefits for next-generation research with spectroscopy and more intense x-rays at NSLS-II. He discusses the instrumentation, features, and uses for the new SRX beamline, highlighting its speed, adjustability, and versatility for probing samples ranging in size from millimeters down to the nanoscale. He will talk about complementary beamlines being developed for additional capabilities at NSLS-II as well.

  11. Synthesis and self-assembly of dumbbell shaped ZnO sub-micron structures using low temperature chemical bath deposition technique

    Energy Technology Data Exchange (ETDEWEB)

    Borade, P. [National Centre for Nanoscience and Nanotechnology, University of Mumbai, Kalina Campus, Santacruz (E), Mumbai 400098 (India); Joshi, K.U. [Anton-Paar India Pvt. Ltd., Thane (W), 400607 (India); Gokarna, A.; Lerondel, G. [Laboratoire de Nanotechnologie et D' Instrumentation Optique, Institut Charles Delaunay, CNRS UMR 6281, Université de Technologie de Troyes, 12 Rue Marie Curie, BP 2060, 10010 Troyes (France); Walke, P. [National Centre for Nanoscience and Nanotechnology, University of Mumbai, Kalina Campus, Santacruz (E), Mumbai 400098 (India); Late, D. [National Chemical Laboratory (NCL), Pune 400027 (India); Jejurikar, S.M., E-mail: jejusuhas@gmail.com [National Centre for Nanoscience and Nanotechnology, University of Mumbai, Kalina Campus, Santacruz (E), Mumbai 400098 (India)

    2016-02-01

    We report well dispersed horizontal growth of ZnO sub-micron structures using simplest technique ever known i.e. chemical bath deposition (CBD). A set of samples were prepared under two different cases A) dumbbell shaped ZnO grown in CBD bath and B) tubular ZnO structures evolved from dumbbell shaped structures by dissolution mechanism. Single phase wurtzite ZnO formation is confirmed using X-ray diffraction (XRD) technique in both cases. From the morphological investigations performed using scanning electron microscopy (SEM), sample prepared under case A indicate formation of hex bit tool (HBT) shaped ZnO crystals, which observed to self-organize to form dumbbell structures. Further these microstructures are then converted into tubular structures as a fragment of post CBD process. The possible mechanism responsible for the self-assembly of HBT units to form dumbbell structures is discussed. Observed free excitonic peak located at 370 nm in photoluminescence (PL) spectra recorded at 18 K indicate that the micro/nanostructures synthesized using CBD are of high optical quality. - Highlights: • Controlled growth of Dumbbell shaped ZnO using Chemical Bath Deposition (CBD). • Growth mechanism of dumbbell shaped ZnO by self-assembling was discussed. • Quick Transformation of ZnO dumbbell structures in to tubular structures by dissolution. • Sharp UV Emission at 370 nm from both dumbbell and tubular structures.

  12. Scaling down the two-dimensional electron gas spin resonance (ESR) phenomena in GaAs/AlGaAs heterostructures to sub-micron samples

    Science.gov (United States)

    Bandaru, Prabhakar; Yablonovitch, Eli; Jiang, Hong-Wen

    2002-03-01

    Electron Spin Resonance (ESR) has been proposed as a technique for achieving single electron and subsequently single spin control, important for the emerging fields of spintronics and quantum computing. In this paper, we report on ESR in the quantum Hall regime, of sub-micron structures containing a few hundred electrons. These phenomena are contrasted with ESR phenomena in structures containing 10^7 - 10^9 electrons, which have been performed so far (Reference 1). There are several novel features observed in the ESR of small structures, such as a very large decrease of resistance and shift in the quantum Hall minima to lower magnetic fields after the resonance. These imply a reduction in the number of electrons and could result from the greater influence of the surface and impurity potential fluctuations intrinsic to a small sample. The ESR peak intensity is hypothesized to result from the transfer of electrons from the localized states to the extended states. References: 1.H.W.Jiang and E. Yablonovitch, Phys. Rev.B., 64, R041307, (2001) 2.M.Dobers, K.v. Klitzing and G. Weimann,Phys. Rev. B, 38, 5453, (1988).

  13. Sub-micron and nanoscale feature depth modulates alignment of stromal fibroblasts and corneal epithelial cells in serum-rich and serum-free media.

    Science.gov (United States)

    Fraser, Sarah A; Ting, Yuk-Hong; Mallon, Kelly S; Wendt, Amy E; Murphy, Christopher J; Nealey, Paul F

    2008-09-01

    Topographic features are generally accepted as being capable of modulating cell alignment. Of particular interest is the potential that topographic feature geometry induces cell alignment indirectly through impacting adsorbed proteins from the cell culture medium on the surface of the substrate. However, it has also been reported that micron-scale feature depth significantly impacts the level of alignment of cellular populations on topography, despite being orders of magnitude larger than the average adsorbed protein layer (nm). In order to better determine the impact of biomimetic length scale topography and adsorbed protein interaction on cellular morphology we have systematically investigated the effect of combinations of sub-micron to nanoscale feature depth and lateral pitch on corneal epithelial cell alignment. In addition we have used the unique properties of a serum-free media alternative in direct comparison to serum-rich medium to investigate the role of culture medium protein composition on cellular alignment to topographically patterned surfaces. Our observation that increasing groove depth elicited larger populations of corneal epithelial cells to align regardless of culture medium composition and of cell orientation with respect to the topography, suggests that these cells can sense changes in topographic feature depths independent of adsorbed proteins localized along ridge edges and tops. However, our data also suggests a strong combinatory effect of topography with culture medium composition, and also a cell type dependency in determining the level of cell elongation and alignment to nanoscale topographic features.

  14. Sub-micron and nanoscale feature depth modulates alignment of stromal fibroblasts and corneal epithelial cells in serum-rich and serum-free media

    Science.gov (United States)

    Fraser, Sarah A.; Ting, Yuk-Hong; Mallon, Kelly S.; Wendt, Amy E.; Murphy, Christopher J.; Nealey, Paul F.

    2011-01-01

    Topographic features are generally accepted as being capable of modulating cell alignment. Of particular interest is the potential that topographic feature geometry induces cell alignment indirectly through impacting adsorbed proteins from the cell culture medium on the surface of the substrate. However, it has also been reported that micron-scale feature depth significantly impacts the level of alignment of cellular populations on topography, despite being orders of magnitude larger than the average adsorbed protein layer (nm). In order to better determine the impact of biomimetic length scale topography and adsorbed protein interaction on cellular morphology we have systematically investigated the effect of combinations of sub-micron to nanoscale feature depth and lateral pitch on corneal epithelial cell alignment. In addition we have used the unique properties of a serum-free media alternative in direct comparison to serum-rich medium to investigate the role of culture medium protein composition on cellular alignment to topographically patterned surfaces. Our observation that increasing groove depth elicited larger populations of corneal epithelial cells to align regardless of culture medium composition and of cell orientation with respect to the topography, suggests that these cells can sense changes in topographic feature depths independent of adsorbed proteins localized along ridge edges and tops. However, our data also suggests a strong combinatory effect of topography with culture medium composition, and also a cell type dependency in determining the level of cell elongation and alignment to nanoscale topographic features. PMID:18041718

  15. The heterogeneous reaction of hydroxyl radicals with sub-micron squalane particles: a model system for understanding the oxidative aging of ambient aerosols

    Science.gov (United States)

    Smith, J. D.; Kroll, J. H.; Cappa, C. D.; Che, D. L.; Liu, C. L.; Ahmed, M.; Leone, S. R.; Worsnop, D. R.; Wilson, K. R.

    2009-05-01

    The heterogeneous reaction of OH radicals with sub-micron squalane particles, in the presence of O2, is used as a model system to explore the fundamental chemical mechanisms that control the oxidative aging of organic aerosols in the atmosphere. Detailed kinetic measurements combined with elemental mass spectrometric analysis reveal that the reaction proceeds sequentially by adding an average of one oxygenated functional group per reactive loss of squalane. The reactive uptake coefficient of OH with squalane particles is determined to be 0.3±0.07 at an average OH concentration of ~1×1010 molecules cm-3. Based on a comparison between the measured particle mass and model predictions it appears that significant volatilization of a reduced organic particle would be extremely slow in the real atmosphere. However, as the aerosols become more oxygenated, volatilization becomes a significant loss channel for organic material in the particle-phase. Together these results provide a chemical framework in which to understand how heterogeneous chemistry transforms the physiochemical properties of particle-phase organic matter in the troposphere.

  16. The heterogeneous reaction of hydroxyl radicals with sub-micron squalane particles: a model system for understanding the oxidative aging of ambient aerosols

    Directory of Open Access Journals (Sweden)

    J. D. Smith

    2009-05-01

    Full Text Available The heterogeneous reaction of OH radicals with sub-micron squalane particles, in the presence of O2, is used as a model system to explore the fundamental chemical mechanisms that control the oxidative aging of organic aerosols in the atmosphere. Detailed kinetic measurements combined with elemental mass spectrometric analysis reveal that the reaction proceeds sequentially by adding an average of one oxygenated functional group per reactive loss of squalane. The reactive uptake coefficient of OH with squalane particles is determined to be 0.3±0.07 at an average OH concentration of ~1×1010 molecules cm−3. Based on a comparison between the measured particle mass and model predictions it appears that significant volatilization of a reduced organic particle would be extremely slow in the real atmosphere. However, as the aerosols become more oxygenated, volatilization becomes a significant loss channel for organic material in the particle-phase. Together these results provide a chemical framework in which to understand how heterogeneous chemistry transforms the physiochemical properties of particle-phase organic matter in the troposphere.

  17. Sub-micron Polymer–Zeolitic Imidazolate Framework Layered Hybrids via Controlled Chemical Transformation of Naked ZnO Nanocrystal Films

    Energy Technology Data Exchange (ETDEWEB)

    Meckler, Stephen M.; Li, Changyi; Queen, Wendy L.; Williams, Teresa E.; Long, Jeffrey R.; Buonsanti, Raffaella; Milliron, Delia J.; Helms, Brett A.

    2015-11-24

    Here we show that sub-micron coatings of zeolitic imidazolate frameworks (ZIFs) and even ZIF–ZIF bilayers can be grown directly on polymers of intrinsic microporosity from zinc oxide (ZnO) nanocrystal precursor films, yielding a new class of all-microporous layered hybrids. The ZnO-to-ZIF chemical transformation proceeded in less than 30 min under microwave conditions using a solution of the imidazole ligand in N,N-dimethylformamide (DMF), water, or mixtures thereof. By varying the ratio of DMF to water, it was possible to control the morphology of the ZIF-on-polymer from isolated crystallites to continuous films. Grazing incidence X-ray diffraction was used to confirm the presence of crystalline ZIF in the thin films, and X-ray absorption spectroscopy was used to quantify film purity, revealing films with little to no residual ZnO. The role solvent plays in the transformation mechanism is discussed in light of these findings, which suggest the ZnO nanocrystals may be necessary to localize heterogeneous nucleation of the ZIF to the polymer surface.

  18. Sub-micron Polymer–Zeolitic Imidazolate Framework Layered Hybrids via Controlled Chemical Transformation of Naked ZnO Nanocrystal Films

    Energy Technology Data Exchange (ETDEWEB)

    Meckler, Stephen M.; Li, Changyi; Queen, Wendy L. [Department; Williams, Teresa E.; Long, Jeffrey R.; Buonsanti, Raffaella; Milliron, Delia J. [McKetta; Helms, Brett A.

    2015-11-02

    Here we show that sub-micron coatings of zeolitic imidazolate frameworks (ZIFs) and even ZIF–ZIF bilayers can be grown directly on polymers of intrinsic microporosity from zinc oxide (ZnO) nanocrystal precursor films, yielding a new class of all-microporous layered hybrids. The ZnO-to-ZIF chemical transformation proceeded in less than 30 min under microwave conditions using a solution of the imidazole ligand in N,N-dimethylformamide (DMF), water, or mixtures thereof. By varying the ratio of DMF to water, it was possible to control the morphology of the ZIF-on-polymer from isolated crystallites to continuous films. Grazing incidence X-ray diffraction was used to confirm the presence of crystalline ZIF in the thin films, and X-ray absorption spectroscopy was used to quantify film purity, revealing films with little to no residual ZnO. The role solvent plays in the transformation mechanism is discussed in light of these findings, which suggest the ZnO nanocrystals may be necessary to localize heterogeneous nucleation of the ZIF to the polymer surface.

  19. Hygroscopicity of Chemically Aged, sub-micron Squalane Particles: On the Role of Size and Composition towards the Hygroscopicity Parameter κ

    Science.gov (United States)

    Harmon, C. W.; Smith, J. D.; Che, D. L.; Leone, S. R.; Wilson, K. R.

    2010-12-01

    Measurements presented herein explore cloud condensation nuclei (CCN) activity of sub-micron squalane particles chemically aged by hydroxyl radicals as a function of size and OH exposure. As squalane particles are exposed to OH radicals, size-selected 100, 150, and 200 nm particles monotically decrease in size with increasing OH exposure. Concurrently, their CCN derived hygroscopicity parameter values, κ, increase with OH exposure until saturating at 0.165 in the 100 nm data set, 0.140 in the 150 nm data set, and reach a maximum value of 0.075 in the 200 nm data set at the highest level of OH exposure. The critical super-saturation relative humidity (RH) at which CCN activity is achieved decreases initially with increasing OH exposure and then increases with OH exposure, most notably for the 100 nm data set and weakly with the 150 nm data set. Chemically aged squalane particles from the 200 nm data set show a monotonic decrease in critical super-saturation RH with all values of increasing OH exposure between 0.1-2.5 × 10^13 s molec./cc. The measured O:C ratios of 160 nm chemically aged squalane particles, which were reported previously, are compared to κ values by the CCN derived relationship reported in literature: κ = 0.30*O:C and reasonable agreement is attained in the size-selected 150 nm data set. These values are also compared with the hygroscopic growth factor derived relationship in literature: κ = 0.49*(O:C -0.25) and reasonable agreement is attained at O:C > 0.35.

  20. Hybrid titanium dioxide/PS-b-PEO block copolymer nanocomposites based on sol-gel synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Gutierrez, J; Tercjak, A; Garcia, I; Peponi, L; Mondragon, I [' Materials-Technologies' Group, Departamento Ingenieria Quimica y Medio Ambiente, Escuela Politecnica, Universidad PaIs Vasco/Euskal Herriko Unibertsitatea, Plaza Europa 1, E-20018 Donostia-San Sebastian (Spain)], E-mail: inaki.mondragon@ehu.es

    2008-04-16

    The poly(styrene)-b-poly(ethylene oxide) (SEO) amphiphilic block copolymer, with two different molecular weights, has been used as a structure directing agent for generating nanocomposites of TiO{sub 2}/SEO via the sol-gel process. SEO amphiphilic block copolymers are designed with a hydrophilic PEO-block which can interact with inorganic molecules, as well as a hydrophobic PS-block which builds the matrix. The addition of different amounts of sol-gel provokes strong variations in the self-assembled morphology of TiO{sub 2}/SEO nanocomposites with respect to the neat block copolymer. As confirmed by atomic force microscopy (AFM), TiO{sub 2}/PEO-block micelles get closer, forming well-ordered spherical domains, in which TiO{sub 2} nanoparticles constitute the core surrounded by a corona of PEO-blocks. Moreover, for 20 vol% sol-gel the generated morphology changes to a hexagonally ordered structure for both block copolymers. The cylindrical structure of these nanocomposites has been confirmed by the two-dimensional Fourier transform power spectrum of the corresponding AFM height images. Affinity between titanium dioxide precursor and PEO-block of SEO allows us to generate hybrid inorganic/organic nanocomposites, which retain the optical properties of TiO{sub 2}, as evaluated by UV-vis spectroscopy.

  1. Ordered nanostructure of PS-b-PEO copolymer by solvent annealing with mixture of benzene/water vapor and its micropattern fabrication.

    Science.gov (United States)

    Kim, Tae Hee; Hwang, Jiyoung; Acharya, Himadri; Park, Cheolmin

    2010-10-01

    We investigate the effect of water/benzene co-solvent vapor on the ordering of poly(styrene-b-ethylene oxide) (PS-b-PEO) copolymer thin film on silicon substrate upon solvent annealing. In-plane cylindrical PEO microdomains were observed after exposure of benzene vapor. The addition of water vapor dominantly produced the cylindrical PEO domains aligned perpendicular to the substrate. The best ordering of the cylinders was obtained at the water fraction of approximately 0.05. The degree of ordering decreases while the periodicity of haxagonally packed PEO cylinders increases with the amount of water in the vapor mixture. The average center-to-center distance of hexagonally packed cylindrical PEO microdomains increases with the water fraction from approximately 25 nm to 40 nm. As one way of utilizing the dewetting of thin films inevitable during solvent annealing, PS-b-PEO micropatterns prepared by microcontact printing were treated with co-solvent vapor, which allows us to fabricate the controlled dewet structures guided by the micropatterns. Cylinder-to-sphere phase transition of PEO microdomains also occurred upon solvent annealing in the micropatterned PS-b-PEO films.

  2. Hexagonal-to-cubic phase transformation in composite thin films induced by FePt nanoparticles located at PS/PEO interfaces.

    Science.gov (United States)

    Aissou, Karim; Fleury, Guillaume; Pecastaings, Gilles; Alnasser, Thomas; Mornet, Stéphane; Goglio, Graziella; Hadziioannou, Georges

    2011-12-06

    The organization process of asymmetric poly(styrene-block-ethylene oxide) (PS-b-PEO) copolymer thin films blended with FePt nanoparticles is studied. In a first step, it is shown that FePt nanoparticles stabilized by oleic acid ligands are distributed within the PS matrix phase, whereas the same particles partially covered with short dopamine-terminated-methoxy poly(ethylene oxide) (mPEO-Dopa) are located at PS/PEO interfaces. The swelling of PS domains, induced by FePt_oleic acid nanoparticles during the solvent annealing process, results in formation of a disordered microstructure in comparison to the well-organized hexagonally close-packed (HCP) cylinder phase formed in the neat PS-b-PEO copolymer. The evolution of the microstructure of PS-b-PEO/FePt_mPEO-Dopa composite has been investigated for different solvent annealing treatments. Under high-humidity conditions during the vapor annealing process, the addition of FePt nanoparticles results in formation of spheres in the film split into terraces. The upper and lower terraces are occupied by spheres organized in an unusual square and HCP phases, respectively. Under low-humidity conditions, undulated PEO cylinders oriented parallel to substrate are formed in the presence of FePt nanoparticles. In this case, we observe that most of the nanoparticles accumulate within the core of topological defects, which induces a low nanoparticle concentration at the PS/PEO interfaces and so stabilizes an intermediate undulated cylinder phase. © 2011 American Chemical Society

  3. On the sub-micron aerosol size distribution in a coastal-rural site at El Arenosillo Station (SW – Spain

    Directory of Open Access Journals (Sweden)

    M. Sorribas

    2011-11-01

    Full Text Available This study focuses on the analysis of the sub-micron aerosol characteristics at El Arenosillo Station, a rural and coastal environment in South-western Spain between 1 August 2004 and 31 July 2006 (594 days. The mean total concentration (NT was 8660 cm−3 and the mean concentrations in the nucleation (NNUC, Aitken (NAIT and accumulation (NACC particle size ranges were 2830 cm−3, 4110 cm−3 and 1720 cm−3, respectively. Median size distribution was characterised by a single-modal fit, with a geometric diameter, median number concentration and geometric standard deviation of 60 nm, 5390 cm−3 and 2.31, respectively. Characterisation of primary emissions, secondary particle formation, changes to meteorology and long-term transport has been necessary to understand the seasonal and annual variability of the total and modal particle concentration. Number concentrations exhibited a diurnal pattern with maximum concentrations around noon. This was governed by the concentrations of the nucleation and Aitken modes during the warm seasons and only by the nucleation mode during the cold seasons. Similar monthly mean total concentrations were observed throughout the year due to a clear inverse variation between the monthly mean NNUC and NACC. It was related to the impact of desert dust and continental air masses on the monthly mean particle levels. These air masses were associated with high values of NACC which suppressed the new particle formation (decreasing NNUC. Each day was classified according to a land breeze flow or a synoptic pattern influence. The median size distribution for desert dust and continental aerosol was dominated by the Aitken and accumulation modes, and marine air masses were dominated by the nucleation and Aitken modes. Particles

  4. Effect of Grafting Density of Random Copolymer Brushes on Perpendicular Alignment in PS-b-PMMA Thin Films

    KAUST Repository

    Lee, Wooseop

    2017-07-18

    We modulated the grafting density (σ) of a random copolymer brush of poly(styrene-r-methyl methacrylate) on substrates to probe its effect on the formation of perpendicularly aligned lamellae of polystyrene-b-poly(methyl methacrylate) (PS-b-PMMA). Supported by coarse-grained simulation results, we hypothesized that an increase in σ will allow us to systematically tune the block copolymer interfacial interactions with the substrates from being preferential to one of the blocks to being neutral toward both blocks and will thereby facilitate enhanced regimes of perpendicularly aligned lamellae. We verified such a hypothesis by using a simple grafting-to approach to modify the substrates and characterized the thickness window for perpendicular lamellae as a function of brush thickness (or σ) on the grafted substrates using scanning force microscopy (SFM) images and grazing incidence small-angle X-ray scattering (GISAXS) measurements. The experimental results validated our hypothesis and suggested that the σ of random copolymer brushes can be used as an additional versatile parameter to modulate the interfacial interactions and the resulting alignment of block copolymer films.

  5. Low-voltage operating flexible ferroelectric organic field-effect transistor nonvolatile memory with a vertical phase separation P(VDF-TrFE-CTFE)/PS dielectric

    Science.gov (United States)

    Xu, Meili; Xiang, Lanyi; Xu, Ting; Wang, Wei; Xie, Wenfa; Zhou, Dayu

    2017-10-01

    Future flexible electronic systems require memory devices combining low-power operation and mechanical bendability. However, high programming/erasing voltages, which are universally needed to switch the storage states in previously reported ferroelectric organic field-effect transistor (Fe-OFET) nonvolatile memories (NVMs), severely prevent their practical applications. In this work, we develop a route to achieve a low-voltage operating flexible Fe-OFET NVM. Utilizing vertical phase separation, an ultrathin self-organized poly(styrene) (PS) buffering layer covers the surface of the ferroelectric polymer layer by one-step spin-coating from their blending solution. The ferroelectric polymer with a low coercive field contributes to low-voltage operation in the Fe-OFET NVM. The polymer PS contributes to the improvement of mobility, attributing to screening the charge scattering and decreasing the surface roughness. As a result, a high performance flexible Fe-OFET NVM is achieved at the low P/E voltages of ±10 V, with a mobility larger than 0.2 cm2 V-1 s-1, a reliable P/E endurance over 150 cycles, stable data storage retention capability over 104 s, and excellent mechanical bending durability with a slight performance degradation after 1000 repetitive tensile bending cycles at a curvature radius of 5.5 mm.

  6. Transglutaminase-induced or citric acid-mediated cross-linking of whey proteins to tune the characteristics of subsequently desolvated sub-micron and nano-scaled particles.

    Science.gov (United States)

    Bagheri, Leila; Yarmand, Mohammadsaeed; Madadlou, Ashkan; Mousavi, Mohammad E

    2014-01-01

    Whey proteins were inter-connected either by the enzyme transglutaminase or citric acid and then desolvated with ethanol to generate particles. Both samples comprised of sub-micron (>300 nm) and nano-scaled (~100 nm) particles based on the hydrodynamic size measurements. Enzyme-induced cross-linking of proteins yielded more monodisperse particles and decreased the mean size of the major (nano-scaled) fraction of particles. Scanning electron microscopy images revealed a spherical morphology for all samples with mean sizes of particles from enzymatically cross-linked proteins. The mediating role of citric acid in bridging the proteins was confirmed by Fourier transform infrared spectroscopy. Differential scanning calorimetry indicated that pre-heating of protein solution before cross-linking and desolvation denatured the proteins entirely. In vitro degradation of whey protein particles in a simulated gastric fluid demonstrated that cross-linking of whey proteins before desolvation stage enhanced significantly the digestion stability of particles.

  7. Last PS magnet refurbished

    CERN Document Server

    2009-01-01

    PS Magnet Refurbishment Programme Completed. The 51st and final refurbished magnet was transported to the PS on Tuesday 3 February. The repair and consolidation work on the PS started back in 2003 when two magnets and a busbar connection were found to be faulty during routine high-voltage tests. The cause of the fault was a combination of age and radiation on electrical insulation. After further investigation the decision was taken to overhaul half of the PS’s 100 magnets to reduce the risk of a similar fault. As from 20 February the PS ring will start a five-week test programme to be ready for operation at the end of March.

  8. Self-assembling morphologies of symmetrical PS-b-PMMA in different sized confining grooves

    DEFF Research Database (Denmark)

    Chen, Wenhui; Luo, Jun; Shi, Peixiong

    2014-01-01

    and pattern registration. In this work, self-assembling morphologies of the lamellar diblock copolymer poly(styrene-b-methyl methacrylate) were investigated to gain a better understanding of the DSA process and to offer some reference for the pattern transfer process. A quantized number of lines was obtained...

  9. Caraterização composicional do AES - um copolímero de enxertia de poli(estireno-co-acrilonitrila em poli(etileno-co-propileno-co-dieno Compositional characterization of AES a graft copolymer based on poly(styrene-co-acrylonitrile and poly(etyhlene-co-propylene-co-diene

    Directory of Open Access Journals (Sweden)

    Renato Turchet

    2006-06-01

    Full Text Available O objetivo deste trabalho é a caracterização do AES, um copolímero de enxertia de poli(estireno-co-acrilonitrila, SAN, em poli(etileno-co-propileno-co-dieno, EPDM. Para tanto, o AES foi submetido à extração seletiva de seus componentes: o SAN livre, o EDPM livre, e o copolímero de enxertia EPDM-g-SAN. O AES e suas frações foram caracterizados por espectroscopia de infravermelho, análise elementar, calorimetria diferencial de varredura e ressonância magnética nuclear, RMN¹H e RMN13C. O AES analisado apresenta a seguinte composição em massa: 65% de EPDM-g-SAN, 13% de EPDM livre e 22% de SAN livre. O EPDM apresenta 69,8% em massa de etileno, 26,5% em massa de propileno e 4,6% em massa do dieno, 2-etilideno-5-norboneno, ENB. O SAN apresenta razão em massa acrilonitrila/estireno de 28/72 e distribuição randômica de comonômeros de estireno e acrilonitrila. Estes resultados são concordantes com a composição do AES fornecida pelo fabricante, indicando que a metodologia proposta é adequada.This work aims the characterization of AES, a graft copolymer based on poly(styrene-co-acrylonitrile, SAN, and poly(etyhlene-co-propylene-co-diene, EPDM. AES was submitted to selective extraction of its components: free SAN, EPDM chains and the graft copolymer EPDM-g-SAN. AES and its fractions were characterized by infrared spectroscopy, elemental analysis, differential scanning calorimetry, 13C and ¹H nuclear magnetic resonance. The AES has 65 wt % of EPDM-g-SAN, 13 wt % of free EPDM and 22 wt % of free SAN. EPDM has 69.8 wt % of ethylene, 26.5 wt % of propylene and 4.6 wt % of diene, 2-ethylidene-5-norbonene ENB. SAN presents acrylonitrile/styrene mass ratio of 28/72 and a random distribution of acrylonitrile and styrene comonomers. These results are in agreement with the composition reported by the AES supplier, indicating that the proposed methodology is adequate.

  10. Inside the PS tunnel

    CERN Multimedia

    1974-01-01

    Pre-start work is going on at the end of the PS long shut-down. The photo shows secondary beams drawn from an internal target (bottom) towards South Hall, behind the shielding wall (top) (see also photo 7409012X).

  11. PS Control Room

    CERN Multimedia

    CERN PhotoLab

    1963-01-01

    The good old PS Control Room, all manual. For each parameter, a knob or a button to control it; for each, a light or meter or oscilloscope to monitor it; carefully written pages serve as the data bank; phones and intercom for communication. D.Dekkers is at the microphone, M.Valvini sits in front.

  12. PS auxiliary magnet

    CERN Multimedia

    CERN PhotoLab

    1974-01-01

    Units of the PS auxiliary magnet system. The picture shows how the new dipoles, used for vertical and horizontal high-energy beam manipulation, are split for installation and removal so that it is not necessary to break the accelerator vacuum. On the right, adjacent to the sector valve and the windings of the main magnet, is an octupole of the set.

  13. PS injection area

    CERN Multimedia

    1974-01-01

    Looking against the direction of protons in the main ring (left): the beam coming from the linac 1 either goes to the booster (on the right) or is deflected towards the PS to be directly injected into section 26 (facing the camera). Also shown the start of the TT2 line, ejected from straight section 16 to go towards the ISR passing over the beam line from the linac. (see Photo Archive 7409009)

  14. PS injection area

    CERN Multimedia

    1974-01-01

    To the right is the PS ring viewed along the direction of the protons. At the left the injection line coming from the 50 MeV Linac 1 (bottom) and going towards the 800 MeV booster, or deflected to the right to be injected directly into straight section 16. The drumlike element behind the (blue) dipole magnet is a 'debuncher' (a 200 MHz cavity). See photos 7409014X and 7409009.

  15. Efficient functionalization of poly(styrene) beads immobilized metal ...

    Indian Academy of Sciences (India)

    during synthesis in aqueous medium. The recovery of such type of homogeneous catalysts has normally been carried out by dialysis, magnetic separation, precipitation and ultra- centrifugation methods.3 However, again ... through immobilization of protected gold NPs.20 They have been extensively exploited in the area of ...

  16. Design, synthesis and physical properties of poly(styrene ...

    Indian Academy of Sciences (India)

    Administrator

    content, 10% gravimetric loss was increased from 481 to 497 °C, while glass transition improved from 123 to. 136 °C (better than neat SBS but lower than PTAS). The blends also established higher tensile strength. (52∙40–59∙96 MPa) relative to SBS. Fine balance of properties renders new SBS/PTAS, potential engineering.

  17. Synthesis of crosslinked poly(styrene-co-divinylbenzene-co ...

    Indian Academy of Sciences (India)

    Administrator

    molecular weight distribution have unique properties which make them interesting and find applications in numerous ... late (SPM, Poly Sciences), sodium dodecyl sulfate (SDS,. Merck), sodium bicarbonate (Sisco) and ... of double distilled water and 0⋅1 g of sodium bicarbonate was added. A stirring rate of 360 rpm and a ...

  18. Efficient functionalization of poly (styrene) beads immobilized metal ...

    Indian Academy of Sciences (India)

    Three types of new bead-shaped heterogeneous nanoparticle (NP) catalysts were synthesized by simplified procedures and studied for continuous reduction of crystal violet (CV) dye. The stabilizing agent, viz., 2-acryloxyethyltrimethyl ammonium chloride (PAC) was functionalized efficiently onto the surface of insoluble ...

  19. Synthesis of crosslinked poly (styrene-co-divinylbenzene-co ...

    Indian Academy of Sciences (India)

    divinylbenzene--sulfopropyl methacrylate) copolymer colloidal particles using emulsion polymerization. The effects of concentration of the emulsifier and the initiator on the particle size and the charge density of the colloidal particles are studied.

  20. Impact of smoking on guided tissue regeneration using a biocomposite poly (lactic-co-glycolic) acid/sub-micron size hydroxyapatite with a rubber dam as an alternative barrier.

    Science.gov (United States)

    Stramazzotti, D; Coiana, C; Zizzi, A; Spazzafumo, L; Sauro, S; D'Angelo, A B; Rubini, C; Aspriello, S D

    2015-03-01

    The purpose of our study was to critically evaluate the results obtained from a guided tissue regeneration technique after 12 months using a bocomposite poly (lactic-co-glycolic) acid/sub-micron size hydroxyapatite (PLGA/HA) with a rubber dam as a barrier in smoking and non-smoking patients. We selected 36 patients (18 current smokers and 18 non-smokers) diagnosed with chronic advanced periodontitis with a periodontal site (probing depth [PD] >5) amenable to regenerative surgery. Twelve months after surgery, the periodontal parameters were found to have statistically improved, when non-smokers were compared with smokers, in: PD reduction (6.3 ± 2.1 mm vs. 3.6 ± 1.9 mm); CAL gain (4.4 ± 1.1 vs. 2.8 ± 2.2 mm); recession (1.8 ± 1.4 mm vs. 0.8 ± 0.9 mm); and hard tissue fill (4.7 ± 0.8 mm vs. 2.8 ± 2.1 mm). Furthermore, since we found PD baseline differences between groups, smoking seemed not to influence the outcomes achieved (CAL gain and ΔREC) 12 months post surgery with respect to PD baseline. The use of PLGA/HA with a rubber dam significantly improved the periodontal parameters in both smoking and non-smoking subjects. This improvement was nevertheless lower in smokers than the non-smokers, confirming the negative impact of smoking on periodontal regeneration. © The Author(s) 2015.

  1. Effect of Entrapped Solvent on the Evolution of Lateral Order in Self-Assembled P(S-r-MMA)/PS-b-PMMA Systems with Different Thicknesses.

    Science.gov (United States)

    Giammaria, Tommaso Jacopo; Ferrarese Lupi, Federico; Seguini, Gabriele; Sparnacci, Katia; Antonioli, Diego; Gianotti, Valentina; Laus, Michele; Perego, Michele

    2017-09-20

    Block copolymers (BCPs) are emerging as a cost-effective nanofabrication tool to complement conventional optical lithography because they self-assemble in highly ordered polymeric templates with well-defined sub-20-nm periodic features. In this context, cylinder-forming polystyrene-block-poly(methyl methacrylate) BCPs are revealed as an interesting material of choice because the orientation of the nanostructures with respect to the underlying substrate can be effectively controlled by a poly(styrene-random-methyl methacrylate) random copolymer (RCP) brush layer grafted to the substrate prior to BCP deposition. In this work, we investigate the self-assembly process and lateral order evolution in RCP + BCP systems consisting of cylinder-forming PS-b-PMMA (67 kg mol -1 , PS fraction of ∼70%) films with thicknesses of 30, 70, 100, and 130 nm deposited on RCP brush layers having thicknesses ranging from 2 to 20 nm. The self-assembly process is promoted by a rapid thermal processing machine operating at 250 °C for 300 s. The level of lateral order is determined by measuring the correlation length (ξ) in the self-assembled BCP films. Moreover, the amount of solvent (Φ) retained in the RCP + BCP systems is measured as a function of the thicknesses of the RCP and BCP layers, respectively. In the 30-nm-thick BCP films, an increase in Φ as a function of the thickness of the RCP brush layer significantly affects the self-assembly kinetics and the final extent of the lateral order in the BCP films. Conversely, no significant variations of ξ are observed in the 70-, 100-, and 130-nm-thick BCP films with increasing Φ.

  2. Water soluble poly(styrene sulfonate)-b-poly(vinylidene fluoride)-b-poly(styrene sulfonate) triblock copolymer nanoparticles

    Czech Academy of Sciences Publication Activity Database

    Černoch, Peter; Černochová, Zulfiya; Petrova, Svetlana; Kaňková, Dana; Kim, J.-S.; Vasu, V.; Asandei, A. D.

    2016-01-01

    Roč. 6, č. 60 (2016), s. 55374-55381 ISSN 2046-2069 R&D Projects: GA MŠk(CZ) LH14038 Institutional support: RVO:61389013 Keywords : polystyrenesulfonate * poly(neopentyl styrenesulfonate) * PVDF Subject RIV: CD - Macromolecular Chemistry Impact factor: 3.108, year: 2016

  3. At PS170 (APPLE)

    CERN Multimedia

    CERN PhotoLab

    1983-01-01

    APPLE stands for Antiproton-Proton to Pair of LEptons (an acronym of the ancestor experiment PAPLEP), the PS170 experiment setup at LEAR to study e+e-pair production in antiproton-proton annihilation by Padova-(CEN) Saclay- Torino Collaboration. It consisted of a liquid hydrogen target surrounded by several layers of proportional chambers in the vertical field of a C-magnet (this photo), a gas Cerenkov counter, wire chambers, hodoscopes, and an electromagnetic calorimeter (see photo 8302539X, 8302540X). See also photo 8301539X for the setup assembly at an early stage.

  4. vQRS Based on Hybrids of CNT with PMMA-POSS and PS-POSS Copolymers to Reach the Sub-PPM Detection of Ammonia and Formaldehyde at Room Temperature Despite Moisture

    Directory of Open Access Journals (Sweden)

    Abhishek Sachan

    2017-07-01

    Full Text Available Nanocomposite-based quantum resistive vapour sensors (vQRS have been developed from the assembly of hybrid copolymers of polyhedral oligomeric silsesquioxane (POSS and poly(methyl methacrylate (PMMA or poly(styrene (PS with carbon nanotubes (CNT. The originality of the resulting conducting architecture is expected to be responsible for the ability of the transducer to detect sub-ppm concentrations of ammonia and formaldehyde at room temperature despite the presence of humidity. In particular, the boosting effect of POSS is evidenced in CNT-based nanocomposite vQRS. The additive fabrication by spraying layer-by-layer provides (sLbL is an effective method to control the reproducibility of the transducers’ chemo-resistive responses. In dry atmosphere, the two types of sensors showed a high sensitivity towards both hazardous gases, as they were able to detect 300 ppb of formaldehyde and 500 ppb of ammonia with a sufficiently good signal to noise ratio (SNR > 10. They also exhibited a quick response times less than 5 s for both vapours and, even in the presence of 100 ppm of water, they were able to detect small amounts of gases (1.5 ppm of NH3 and 9 ppm of CH2O. The results suggest promising applications of POSS-based vQRS for air quality or volatolome monitoring.

  5. Beyond iPS!

    Directory of Open Access Journals (Sweden)

    Editorial

    2012-01-01

    Full Text Available It’s undoubtedly a jubilant moment for scientists and clinicians working in the stem cell arena as Prof. Gurdon and Prof. Shinya Yamanaka have been chosen for the Nobel Prize in Physiology & Medicine this year. The mystery of cell biology is something unfathomable and probably the work of this duo as well as the other scientists, who have put their hands on in- vitro de-differentiation have opened our eyes to a new window or a new paradigm in cell biology. The iPS invention has brought a lot of hope in terms of potential direct benefits to treat several diseases, which have no definite options at the moment. But, we envisage that several spin-offs could come out of this invention and one very significant spin-off finding recently witnessed is the finding by Prof. Masaharu Seno and his team of researchers at the Okayama University, Japan (Chen L, et al. 2012, PLoS ONE 7(4:e33544.doi:10.1371/journal.pone.0033544. According to Prof. Seno, mouse iPS cells (miPS when cultured in the conditioned medium derived from cancer cell lines, differentiate into cancer stem cells (CSCs. While differentiating into CSCs, they do retain the potential to develop endothelial progenitor cells. Several questions arise here: 1.Are these miPS derived CSCs really pluripotent, even if the terminal differentiation destined to specific phenotypes? 2.Shouldn’t the Cancer Stem Cells be termed as cancer progenitor cells, as till date they are considered to be producing only cancer cells but not pluripotent to yield other types of normal tissues? The spin-offs could be infinite as the process of differentiation and de-differentiation happening due to trillions of signals and pathways, most still remaining not-so-well understood. A special mention should be made to Prof. Shinya Yamanaka as he has several sterling qualities to be a role-model for budding scientists. Apart from his passion for science, which made him shift his career from orthopedics to a cell biologist, his

  6. Sub-micron indent induced plastic deformation in copper and irradiated steel; Deformation plastique induite par l'essai d'indentation submicronique, dans le cuivre et l'acier 316L irradie

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, Ch

    1999-07-01

    In this work we aim to study the indent induced plastic deformation. For this purpose, we have developed a new approach, whereby the indentation curves provides the mechanical behaviour, while the deformation mechanisms are observed thanks to Transmission Electron Microscopy (TEM). In order to better understand how an indent induced dislocation microstructure forms, numerical modeling of the indentation process at the scale of discrete dislocations has been worked out as well. Validation of this modeling has been performed through direct comparison of the computed microstructures with TEM micrographs of actual indents in pure Cu (001]. Irradiation induced modifications of mechanical behaviour of ion irradiated 316L have been investigated, thanks to the mentioned approach. An important hardening effect was reported from indentation data (about 50%), on helium irradiated 316L steel. TEM observations of the damage zone clearly show that this behaviour is associated with the presence of He bubbles. TEM observations of the indent induced plastic zone also showed that the extent of the plastic zone is strongly correlated with hardness, that is to say: harder materials gets a smaller plastic zone. These results thus clearly established that the selected procedure can reveal any irradiation induced hardening in sub-micron thick ion irradiated layers. The behaviour of krypton irradiated 316L steel is somewhat more puzzling. In one hand indeed, a strong correlation between the defect cluster size and densities on the irradiation temperature is observed in the 350 deg. C - 600 deg. C range, thanks to TEM observations of the damage zone. On the other hand, irradiation induced hardening reported from indentation data is relatively small (about 10%) and shows no dependence upon the irradiation temperature (within the mentioned range). In addition, it has been shown that the reported hardening vanishes following appropriate post-irradiation annealing, although most of the TEM

  7. SPS and PS Experiments Committee

    CERN Multimedia

    CERN. Geneva

    2004-01-01

    OPEN SESSION: 09:00 Status report of NA58 / COMPASS: A. Magnon 09:40 Status report of PS212 / DIRAC: L. Tausher 10:10 PS212 / DIRAC Addendum: L. Nemenov CLOSED SESSION on Tuesday, 27 April 2004 after the open session, Main Building, 6th floor conference room

  8. The PS locomotive runs again

    CERN Multimedia

    2001-01-01

    Over forty years ago, the PS train entered service to steer the magnets of the accelerator into place... ... a service that was resumed last Tuesday. Left to right: Raymond Brown (CERN), Claude Tholomier (D.B.S.), Marcel Genolin (CERN), Gérard Saumade (D.B.S.), Ingo Ruehl (CERN), Olivier Carlier (D.B.S.), Patrick Poisot (D.B.S.), Christian Recour (D.B.S.). It is more than ten years since people at CERN heard the rumbling of the old PS train's steel wheels. Last Tuesday, the locomotive came back into service to be tested. It is nothing like the monstrous steel engines still running on conventional railways -just a small electric battery-driven vehicle employed on installing the magnets for the PS accelerator more than 40 years ago. To do so, it used the tracks that run round the accelerator. In fact, it is the grandfather of the LEP monorail. After PS was commissioned in 1959, the little train was used more and more rarely. This is because magnets never break down, or hardly ever! In fact, the loc...

  9. The PS Booster hits 40

    CERN Multimedia

    Joannah Caborn Wengler

    2012-01-01

    Many accelerators’ "round" birthdays are being celebrated at CERN these days – the PS turned 50 in 2009, the SPS was 35 in 2011, and this year it's the turn of the PS Booster to mark its 40th anniversary. Originally designed to accelerate 1013 protons to 800 MeV, it has far exceeded its initial design performance over the years.   The PS Booster in the 1970s. Imagine the scene: a group of accelerator physicists staring expectantly at a monitor, when suddenly a shout of joy goes up as a signal flickers across the screen. Does that sound familiar? Well, turn the clock back 40 years (longer hair, wider trouser legs) and you have the situation at the PS Booster on 26 May 1972. On that day, beam was injected into the Booster for the first time. “It was a real buzz,” says Heribert Koziol, then Chairman of the Running-in Committee. “We were very happy – and also a little relieved – when the beam finally...

  10. EDH 'Millionaire' in PS Division

    CERN Document Server

    2001-01-01

    Christmas cheer! Left to right: Gerard Lobeau receives a bottle of Champagne from Derek Mathieson and Jurgen De Jonghe in recognition of EDH's millionth document. At 14:33 on Monday 3 December a technician in PS division, Gerard Lobeau, unwittingly became part of an important event in the life of CERN's Electronic Document Handling system (EDH). While ordering some pieces of aluminum for one of the PS's 10Mhz RF cavities, he created EDH document number 1,000,000. To celebrate the event Derek Mathieson (EDH Project Leader) and Jurgen De Jonghe (Original EDH Project Leader) presented Mr Lobeau with a bottle of champagne. As with 93% of material requests, Mr Lobeau's order was delivered within 24 hours. 'I usually never win anything' said Mr Lobeau as he accepted his prize, 'I initially though there may have been a problem with EDH when the document number had so many zeros in it, and was then surprised to get a phone call from you a few minutes later.' The EDH team had been monitoring the EDH document number ...

  11. Striped, Ellipsoidal Particles by Controlled Assembly of Diblock Copolymers

    Science.gov (United States)

    2013-04-17

    prediction has been experimentally verified by the observation of induced perpendicular orientation of poly- (styrene-b- methyl methacrylate ) (PS-b-PMMA...thermodynamically unstable or metastable morphologies.41−47 For example, a kinetically trapped morphology with axially stacked lamellae of poly(styrene-b...synthesized by sequential anionic polymerization using tetrahydrofur- an (THF) as a solvent at −78 °C with number average molar mass (Mn) values of the PS block

  12. Development of microporous drug-releasing films cast from artificial nanosized latexes of poly(styrene-co-methyl methacrylate) or poly(styrene-co-ethyl methacrylate).

    Science.gov (United States)

    Otto, Daniel P; Vosloo, Hermanus C M; Liebenberg, Wilna; de Villiers, Melgardt M

    2008-08-01

    Two sets of copolymers comprising of styrene and either methyl or ethyl methacrylate as comonomer were conveniently synthesized by microemulsion copolymerization. The purified materials were characterized by GPC-MALLS and were shown to form artificial nanolatexes in THF. ATR-FTIR analysis revealed differences in copolymer composition and based on the copolymer properties, a selection of copolymers was chosen to cast drug-loaded, microporous films that exhibit microencapsulation of drug agglomerates. The contact angles of the copolymers suggested potential applications in medical devices to prevent the formation of bacterial biofilms that commonly result in infections. Additionally, the different copolymeric films showed two phases of drug release characterized by a rapid initial drug release followed by a zero-order phase. Depending on the application, one could select the copolymer films that best suited the application i.e. for short-term drug release applications such as urinary catheters or long-term applications such as artificial implants.

  13. Ps-atom scattering at low energies

    CERN Document Server

    Fabrikant, I I

    2015-01-01

    A pseudopotential for positronium-atom interaction, based on electron-atom and positron-atom phase shifts, is constructed, and the phase shifts for Ps-Kr and Ps-Ar scattering are calculated. This approach allows us to extend the Ps-atom cross sections, obtained previously in the impulse approximation [Phys. Rev. Lett. 112, 243201 (2014)], to energies below the Ps ionization threshold. Although experimental data are not available in this low-energy region, our results describe well the tendency of the measured cross sections to drop with decreasing velocity at $v<1$ a.u. Our results show that the effect of the Ps-atom van der Waals interaction is weak compared to the polarization interaction in electron-atom and positron-atom scattering. As a result, the Ps scattering length for both Ar and Kr is positive, and the Ramsauer-Townsend minimum is not observed for Ps scattering from these targets. This makes Ps scattering quite different from electron scattering in the low-energy region, in contrast to the inter...

  14. Enhanced personal protection at the PS

    CERN Multimedia

    Samuel Morier Genoud

    2013-01-01

    Pictures 03, 06, 07 08 : Pierre Ninin, deputy group leader of GS-ASE and responsible for the installation of the new PS complex safety system, in front of a new access control system.Pictures 10, 12 ,13 : View of Building 271, the future control centre of the new PS complex safety system.

  15. PS, SL and LHC Auditoria change names

    CERN Document Server

    2003-01-01

    Following the replacement of the PS, SL and LHC Divisions by the AB and AT Divisions, the Auditoria are also changing their names. PS Auditorium is renamed AB Meyrin SL Auditorium is renamed AB Prévessin LHC Auditorium is renamed AT

  16. Timing Challenges for Very Deep Sub-Micron (VDSM IC

    Directory of Open Access Journals (Sweden)

    Ichiang Lin

    2002-01-01

    Full Text Available Many IC design houses failed to be market leaders because they miss the market window due to timing closure problems. Compared to half-micron designs, the amount of time spent on timing verification has greatly increased. Cell delays can be accurately estimated during logic synthesis. However, interconnect delays are unknown until the wire geometry is defined in physical design. Logic synthesis using the cell library models for interconnect delay estimates may be statistically accurate, but can not predict the delay of individual nets accurately. Delay estimates for individual nets (global nets, long wires, large fan-outs, buses, which matter most for the critical paths can be inaccurate and cause a design failure. Inaccurate timing verification causes silicon failure in shipped products that results in the loss of millions of dollars spent designing a high-performance product and potentially larger costs due to lost market share. Full-chip, sign-off verification with silicon-accuracy will allow these problems to be discovered and fixed before tape-out.

  17. Dynamics of vortex matter in YBCO sub-micron bridges

    Science.gov (United States)

    Papari, G.; Carillo, F.; Stornaiuolo, D.; Massarotti, D.; Longobardi, L.; Beltram, F.; Tafuri, F.

    2014-11-01

    We have developed a fabrication process that allows us to realize pure YBCO nanowires displaying robust superconductivity at widths w as low as 160 nm. We can modify the process in order to maintain a Au protective layer. This allows us to scale our nanowires even further to widths as low as 50 nm. We have studied how the presence of vortices and the occurrence of phase slips affect the transport properties of nanowires in the width range ξ entry barrier is found to scale with the width. Our findings confirm that for widths ξ < w < λ nanowires are better protected against phase slips and vortex flow.

  18. Sub-micron surface plasmon resonance sensor systems

    Science.gov (United States)

    Glazier, James A. (Inventor); Amarie, Dragos (Inventor)

    2013-01-01

    Wearable or implantable devices combining microfluidic control of sample and reagent flow and micro-cavity surface plasmon resonance sensors functionalized with surface treatments or coatings capable of specifically binding to target analytes, ligands, or molecules in a bodily fluid are provided. The devices can be used to determine the presence and concentration of target analytes in the bodily fluids and thereby help diagnose, monitor or detect changes in disease conditions.

  19. W-CMP for sub-micron inverse metallisation

    NARCIS (Netherlands)

    van Kranenburg, H.; van Corbach, H.D.; Woerlee, P.H.; Lohmeier, Martin

    1997-01-01

    Chemical Mechanical Polishing (CMP) of tungsten for an inverse metallisation scheme is investigated. The influence of CMP parameters on removal rate and uniformity is studied. The main effects on the removal rate are the applied pressure and the rotation rate of the polishing pad. To the first order

  20. Nano-ring arrays for sub-micron particle trapping

    Science.gov (United States)

    Han, Xue; Truong, Viet Giang; Nic Chormaic, Síle

    2017-04-01

    Plasmonic tweezers based on nano-ring arrays on gold thin film are demonstrated. A cylindrical surface plasmon resonance is generated in the aperture of a nano-ring and a transmission peak results. When nano-slits are included to connect the nano-rings, the transmission peak becomes narrower. When the size of the aperture of the nano-ring is reduced, this peak is red-shifted. Both 0.5 μm and 1 μm polystyrene particles are trapped successfully by nano-ring arrays. A self-induced back-action effect is observed when a red-shifted laser beam is used. With multiple trapping sites provided by the nano-ring array, this type of plasmonic tweezers has huge potential to be integrated in lab-on-a-chip systems for life sciences research.

  1. Sub-micron surface plasmon resonance sensor systems

    Science.gov (United States)

    Glazier, James A. (Inventor); Amarie, Dragos (Inventor)

    2012-01-01

    A sensor for detecting the presence of a target analyte, ligand or molecule in a test fluid, comprising a light transmissive substrate on which an array of surface plasmon resonant (SPR) elements is mounted is described. A multi-channel sensor for detecting the presence of several targets with a single microchip sensor is described. A multi-channel sensor including collections of SPR elements which are commonly functionalized to one of several targets is also described. The detectors sense changes in the resonant response of the SPR elements indicative of binding with the targets.

  2. Physics of sub-micron cosmic dust particles

    Science.gov (United States)

    Roy, N. L.

    1974-01-01

    Laboratory tests with simulated micrometeoroids to measure the heat transfer coefficient are discussed. Equations for ablation path length for electrically accelerated micrometeoroids entering a gas target are developed which yield guidelines for the laboratory measurement of the heat transfer coefficient. Test results are presented for lanthanum hexaboride (LaB sub 6) microparticles in air, argon, and oxygen targets. The tests indicate the heat transfer coefficient has a value of approximately 0.9 at 30 km/sec, and that it increases to approximately unity at 50 km/sec and above. Test results extend to over 100 km/sec. Results are also given for two types of small particle detectors. A solid state capacitor type detector was tested from 0.61 km/sec to 50 km/sec. An impact ionization type detector was tested from 1.0 to 150 km/sec using LaB sub 6 microparticles.

  3. Metrology of sub-micron structured polymer surfaces

    DEFF Research Database (Denmark)

    Quagliotti, Danilo; Tosello, Guido; Salaga, J.

    surface replication of the tool insert component when moulding the polymer melt [1]. This aspect is particularly critical when dealing with increasingly small dimensional scales in micro- and nano-structured surfaces [2, 3].In this context, a metrological investigation of polymer replicated surfaces using...

  4. Sub-Micron Grinding of a Food Product

    NARCIS (Netherlands)

    Hennart, S.L.A.

    2011-01-01

    This thesis describes how the activity of a preservative product used in food coatings can be optimized. This project is partly sponsored by the European Marie Curie Framework projects as part of the BioPowders research training network. DSM Food Specialties hosts and co finances this project. The

  5. On the crystallization behavior of syndiotactic-b-atactic polystyrene stereodiblock copolymers, atactic/syndiotactic polystyrene blends, and aPS/sPS blends modified with sPS-b-aPS

    Energy Technology Data Exchange (ETDEWEB)

    Annunziata, Liana, E-mail: liana.annunziatta@univ-rennes1.fr [Organométalliques et Catalyse, UMR 6226 Sciences Chimiques CNRS, Université de Rennes 1, Campus de Beaulieu, F-35042 Rennes Cedex (France); Monasse, Bernard, E-mail: bernard.monasse@mines-paristech.fr [Mines-ParisTech, CEMEF, Centre de Mise en Forme des Matériaux, UMR CNRS 7635, Sophia Antipolis (France); Rizzo, Paola; Guerra, Gaetano [Dipartimento di Chimica e Biologia, Università degli studi di Salerno, Via Ponte don Melillo, I-84084 Fisciano, SA (Italy); Duc, Michel [Total Petrochemicals Research Feluy, Zone Industrielle Feluy C, B-7181 Seneffe (Belgium); Carpentier, Jean-François, E-mail: jean-francois.carpentier@univ-rennes1.fr [Organométalliques et Catalyse, UMR 6226 Sciences Chimiques CNRS, Université de Rennes 1, Campus de Beaulieu, F-35042 Rennes Cedex (France)

    2013-09-16

    Crystallization and morphological features of syndiotactic-b-atactic polystyrene stereodiblock copolymers (sPS-b-aPS), atactic/syndiotactic polystyrene blends (aPS/sPS), and aPS/sPS blends modified with sPS-b-aPS, with different compositions in aPS and sPS, have been investigated using differential scanning calorimetry (DSC), polarized light optical microscopy (POM) and wide angle X-ray diffraction (WAXRD) techniques. For comparative purposes, the properties of parent pristine sPS samples were also studied. WAXRD analyses revealed for all the samples, independently from their composition (aPS/sPS ratio) and structure (blends, block copolymers, blends modified with block copolymers), the same polymorphic β form of sPS. The molecular weight of aPS and sPS showed opposite effects on the crystallization of 50:50 aPS/sPS blends: the lower the molecular weight of aPS, the slower the crystallization while the lower the molecular weight of sPS, the faster the crystallization. DSC studies performed under both isothermal and non-isothermal conditions, independently confirmed by POM studies, led to a clear trend for the crystallization rate at a given sPS/aPS ratio (ca. 50:50 and 20:80): sPS homopolymers > sPS-b-aPS block copolymers ∼sPS/aPS blends modified with sPS-b-aPS copolymers > sPS/aPS blends. Interestingly, sPS-b-aPS block copolymers not only crystallized faster than blends, but also affected positively the crystallization behavior of blends. At 50:50 sPS/aPS ratio, blends (Blend-2), block copolymers (Cop-1) and blends modified with block copolymers (Blend-2-mod) crystallized via spherulitic crystalline growth controlled by an interfacial process. In all cases, an instantaneous nucleation was observed. The density of nuclei in block copolymers (160,000−190,000 nuclei mm{sup −3}) was always higher than that in blends and modified blends (30,000−60,000 nuclei mm{sup −3}), even for quite different sPS/aPS ratio. At 20:80 sPS/aPS ratio, the block copolymers

  6. Synthesis and characterization of novel functional electrosterically stabilized colloidal particles prepared by emulsion polymerization using a strongly ionized amphiphilic diblock copolymer

    OpenAIRE

    Priti S. Mohanty; Dietsch, Hervé; Rubatat, Laurent; Stradner, Anna; Matsumoto, K.; Matsuoka, H; Schurtenberger, Peter

    2009-01-01

    Amphiphilic diblock copolymers such as poly(styrene)-block-poly(styrene sulfonate) (PS-b-PSS) (Matsuoka, H.; Maeda, S.; Kaewsaiha, P.; Matsumoto, K. Langmuir 2004, 20, 7412), belong to a class of new polymeric surfactants that ionize strongly in aqueous media. We investigated their self-assembly behavior in aqueous solutions and used them as an emulsifier to prepare electrosterically stabilized colloidal particles of different diameters between 70 to 400 nm. We determined the size, size polyd...

  7. Ps 22 in Gospels’ interpretation of Passion

    Directory of Open Access Journals (Sweden)

    Sylwester Jędrzejewski

    2012-09-01

    Full Text Available Ps 22 is a piece of artistically high poetry, clear images and metaphors, historical and prophetic references. The conviction of biblical scholars that the New Testament writers has recognized in Ps 22 prophetic witness of passion, accompanies the Church from its beginnings. The words of Jesus on the cross, taken from Ps 22: 2, have a character of lamentable re-symbolization of the prayer of Israel. These words establish a theological answer in the form of suitable credo as well. Dramatic question “why?” is connected with a proclamation and identification “My God”. The personal experience of oppression and death is included by Jesus in the history of his nation and in the experience of God. Ps 22 in the Gospels’ passion context becomes a proclamation form of prayer and a very personal, expressed in such dramatic circumstances confession of the faith.

  8. Yasp for LEIR to PS injection

    CERN Document Server

    Kain, V; Bartosik, H; Huschauer, A; Jacquet, D; Nicosia, D; Pasinelli, S; Wenninger, J

    2017-01-01

    The steering program YASP was introduced in the LEIRinjection as well as the extraction lines in 2016 to correctthe trajectories with well-known model based correctionalgorithms such as MICADO or SVD. In addition a YASPconfiguration was prepared to correct the extraction linetogether with the first turn of the PS. In this way the injectionoscillations can be corrected while keeping the trajectoryreasonable in the PS injection line.

  9. PS overcomes two serious magnet failures

    CERN Multimedia

    Maximilien Brice

    2003-01-01

    Two magnets and a bus bar connection in the PS were found to be faulty during high-voltage tests at the end of the accelerator shutdown. A five-week repair schedule was quickly devised. A team of mechanics, technicians and engineers worked at full speed to replace the faulty magnets, succeeding in limiting the delay of the accelerators' spring start-up to two weeks. Here we see the PS magnet string awaiting the replacement no. 6 magnet.

  10. Low energy o-Ps-o-Ps elastic scattering using a simple model

    Energy Technology Data Exchange (ETDEWEB)

    Himanshu, Sharma [Veer Kunwar Singh Univ., Dept. of Physics, Bihar (India); Kiran, Kumari [R N College, P. G. Dept. of Physics, Bihar (India); Sumana, Chakraborty [Indian Association for the Cultivation of Science, Dept. of Theoretical Physics (India)

    2009-06-15

    A simple model is employed to investigate o-Ps-o-Ps (positronium-positronium) scattering at low energies. This model contains the effect of exchange explicitly and a model long range potential in the framework of static-exchange model. These two physical features are of key importance in Ps-Ps (atom-atom) scattering system. S-wave triplet-triplet and singlet-singlet scattering lengths and corresponding phase shifts up to the incident momentum k = 0.5 a.u. are in excellent agreement with those yielded by most elaborate and theoretically sound predictions. (authors)

  11. LS1 Report: PS beams are back!

    CERN Multimedia

    Katarina Anthony & Anaïs Schaeffer

    2014-01-01

    For the first time in over 15 months, there are beams back in the PS. Making their first tour of the accelerator today, 20 June, their injection marks the end of weeks of cold checkouts and hardware commissioning in the PS.   The CERN Control Centre (CCC) is back in business: people gather to restart the LHC injectors, today the PS. Since hardware commissioning was wrapped up on 23 May, the Operations Group (BE-OP) has been conducting cold checkouts on the PS. This involves switching on all of the machine's systems, verifying that they respond to commands by OP and ensuring they are calibrated to beam timings. "These verifications were done, in part, during the hardware commissioning dry runs," says Rende Steerenberg, PS section leader. "But the cold checkouts are on a much larger scale, as we act as if there is beam in the whole machine. We placed a full load on the controls system, cooling, networks, etc. in order to setup the accelerator in the most realis...

  12. PS overcomes two serious magnet failures

    CERN Multimedia

    Maximilien Brice

    2003-01-01

    Two magnets and a bus bar connection in the PS were found to be faulty during high-voltage tests at the end of the accelerator shutdown. A five-week repair schedule was quickly devised. A team of mechanics, technicians and engineers worked at full speed to replace the faulty magnets, succeeding in limiting the delay of the accelerators' spring start-up to two weeks. These pictures show one of the magnets (no. 19) on the PS locomotive brought back into service for the removal and replacement operations.

  13. Preparation and surface functionalisation of poly(styrene maleimide) nanoparticles for bacterial detection

    CSIR Research Space (South Africa)

    Barnard, A

    2012-10-01

    Full Text Available .kashan.co.za] INTRODUCTION The detection of bacteria in water is essential for the prevention of water-borne disease outbreaks. Conventionally, culturing methods are used to detect bacteria in water, whereby the number of bacteria present in a sample is multiplied to a... to the particle surfaces for attachment of fluorescent markers and antibodies. Figure 1: Process diagram of proposed development method of nanoparticles for bacteria detection Particle characterisation was performed with transmission electron microscopy (TEM...

  14. Functionalization of cross-linked poly(styrene) in the preparation of a PET target material

    Energy Technology Data Exchange (ETDEWEB)

    Zippi, E.M.; Grover, John; Valiulis, M.B.; Tibbets, Cynthia [Louisiana State Univ., Shreveport, LA (United States). Dept. of Chemistry and Physics; Kabalka, G.W. [Tennessee Univ., Knoxville, TN (United States). Dept. of Chemistry

    1996-05-01

    In an effort to prepare an improved carbon-rich target material for the generation of [{sup 13}N]ammonia for use in PET, styrene was polymerized and cross-linked with various percentages of divinylbenzene(DVB). The resulting copolymers were then sulfonated and nitrated and the degree of substitution was determined by elemental analysis. As expected, increased levels of DVB sterically hindered substitution of the aromatic ring. (Author).

  15. Synthesis of soft shell poly(styrene) colloids for filtration experiments

    DEFF Research Database (Denmark)

    Hinge, Mogens

    these structures influence the filtration dewatering characteristic of organic materials. One of the structures that have been identified to affect the filtration dewatering behavior of activated sludge is the amount of extracellular polymer substance (EPS). EPS is a water swollen material and it has been shown...... that the more EPS the larger resistance to filtration. It is difficult to access the influence of water swollen material (as EPS) on the filtration dewatering of activated sludge by performing filtration dewatering experiments on activated sludge. A reason for this is that activated sludge is a physical...... and chemical complex material that is biological active. It is therefore difficult to extract the effect from one single material parameter as the effect from the amount or type of water swollen material from filtration dewatering experiments performed on activated sludge. Substituting the complex organic...

  16. Assaying Benefits of Poly[styrene-4-(trimethylammonium)methyl Triiodide] in Respiratory Protection Devices

    Science.gov (United States)

    2009-12-01

    obscured by experimental limitations. A feature common to each of the devices tested was a thin layer of activated carbon located downstream of the...standard filtration systems. In parallel with developmental activities conducted by Triosyn from 2002–2009 the Air Force Research Laboratory (AFRL...Bronze—a clip-on device containing a PSTI-coated nonwoven medium that attached to the front face of a commercial off-the-shelf (COTS) canister

  17. Modification of poly(styrene-block-butadiene-block-styrene) [SBS] with phosphorus containing fire retardants

    DEFF Research Database (Denmark)

    Chernyy, Sergey; Ullah, Saif; Jomaas, Grunde

    2015-01-01

    An elaborate survey of the chemical modification methods for endowing highly flammable SBS with increased fire resistant properties by means of chemical modification of the polymer backbone with phosphorus containing fire retardant species is presented. Optimal conditions for free radical additio...... application of the H3PO4 modified SBS as a fire retardant additive for bitumen material, in combination with synergetic melamine species, offered 25% better self-extinguishing properties of such formulation already at a low loading level of the fire retardant components (3.5 wt.%)....

  18. Dielectric study of Poly(styrene- co -butadiene) Composites with Carbon Black, Silica, and Nanoclay

    KAUST Repository

    Vo, Loan T.

    2011-08-09

    Dielectric spectroscopy is used to measure polymer relaxation in styrene-butadiene rubber (SBR) composites. In addition to the bulk polymer relaxation, the SBR nanocomposites also exhibit a slower relaxation attributed to polymer relaxation at the polymer-nanoparticle interface. The glass transition temperature associated with the slower relaxation is used as a way to quantify the interaction strength between the polymer and the surface. Comparisons were made among composites containing nanoclay, silica, and carbon black. The interfacial relaxation glass transition temperature of SBR-clay nanocomposites is more than 80 °C higher than the SBR bulk glass transition temperature. An interfacial mode was also observed for SBR-silica nanocomposites, but the interfacial glass transition temperature of SBR-silica nanocomposite is somewhat lower than that of clay nanocomposites. An interfacial mode is also seen in the carbon black filled system, but the signal is too weak to analyze quantitatively. The interfacial polymer relaxation in SBR-clay nanocomposites is stronger compared to both SBR-carbon black and SBR-silica composites indicating a stronger interfacial interaction in the nanocomposites containing clay. These results are consistent with dynamic shear rheology and dynamic mechanical analysis measurements showing a more pronounced reinforcement for the clay nanocomposites. Comparisons were also made among clay nanocomposites using different SBRs of varying styrene concentration and architecture. The interfacial glass transition temperature of SBR-clay nanocomposites increases as the amount of styrene in SBR increases indicating that styrene interacts more strongly than butadiene with clay. © 2011 American Chemical Society.

  19. Spectrophotometric study of the interaction of methylene blue with poly(styrene-co-sodium styrene sulfonate

    Directory of Open Access Journals (Sweden)

    Souha Ben Mahmoud

    2016-05-01

    Full Text Available The interaction of the cationic phenothiazine dye, the Methylene Blue (MB with poly-(sodium styrene sulfonatef–co-(styrene1-f, (PSSNa f, has been investigated by spectrophotometric method. The polyelectrolyte induced metachromasy resulting in a blue shift of the absorption maxima of the dye, in agreement with the formation of dye H-aggregates. The stability of the PSSNa-MB complexes was studied as a function of polyelectrolyte chain length, polyelectrolyte electrostatic charge density f, polyelectrolyte concentration, NaCl salt addition, tetrahydrofurane (THF addition and THF treatment. The stoichiometry of PSSNa-MB complex evaluated by the molar ratio method was found 4:1 for the fully charged PSSNa f = 1. Reversal of metachromasy was observed upon salt and THF addition, while THF treatment does not affect the complex and allows recovering the initial complex. Finally, thermodynamic parameters of the interaction between the polyelectrolyte and the dye at different temperatures, namely free energy DG, the enthalpy DH and the entropy DS have been evaluated to determine the binding constant and as a consequence the stability of the complex. The metachromasy effect was found to be more high as the chemical charge f increases and reaches its maximum value f = 1, when operating at optimal conditions. So, the PSSNa f = 1-MB complex is the most stable in comparison to the others based on lower charge density PSSNa f.

  20. Microphase separation of a symmetric poly(styrene-B-paramethylstyrene) diblock copolymer

    DEFF Research Database (Denmark)

    Bartels, V.T.; Abetz, V.; Mortensen, K.

    1994-01-01

    transition temperature T(MST) by approximately 7%. Also from a peak intensity analysis we determine T(MST) at approximately 180-degrees-C. The shape of the peak change at T(MST) and the indication of a second-order peak is observed, characteristic of a lamellar phase in the ordered regime. Intensity does...

  1. Structure and Piezoelectricity of Poly (styrene-co-acrylonitrile) Copolymer Doped with Different Dyes

    Czech Academy of Sciences Publication Activity Database

    Elhadidy, Hassan; Abdelhamid, M.I.; Aboelwafa, A.M.; Habib, A.

    2013-01-01

    Roč. 52, č. 12 (2013), s. 1277-1284 ISSN 0360-2559 R&D Projects: GA MŠk(CZ) ED1.1.00/02.0068; GA MŠk(CZ) EE2.3.20.0214 Institutional support: RVO:68081723 Keywords : DANS * DAST * Piezo- and pyro- electricity * SAN * structure * TDSC Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.481, year: 2012

  2. Bio-Functional, Lanthanide-Labeled Polymer Particles by Seeded Emulsion Polymerization and their Characterization by Novel ICP-MS Detection.

    Science.gov (United States)

    Thickett, Stuart C; Abdelrahman, Ahmed I; Ornatsky, Olga; Bandura, Dmitry; Baranov, Vladimir; Winnik, Mitchell A

    2010-01-01

    We present the synthesis and characterization of monodisperse, sub-micron poly(styrene) (PS) particles loaded with up to and including 10(7) lanthanide (Ln) ions per particle. These particles have been synthesized by seeded emulsion polymerization with a mixture of monomer and a pre-formed Ln complex, and analyzed on a particle-by-particle basis by a unique inductively coupled plasma mass cytometer. Seed particles were prepared by surfactant-free emulsion polymerization (SFEP) to obtain large particle sizes in aqueous media. Extensive surface acid functionality was introduced using the acid-functional initiator ACVA, either during seed latex synthesis or in the second stage of polymerization. The loading of particles with three different Ln ions (Eu, Tb, and Ho) has proven to be close to 100 % efficient on an individual and combined basis. Covalent attachment of metal-tagged peptides and proteins such as Neutravidin to the particle surface was shown to be successful and the number of bound species can be readily determined. We believe these particles can serve as precursors for multiplexed, bead-based bio-assays utilizing mass cytometric detection.

  3. Positron Annihilation in the Bipositronium Ps2

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, David H.; Frolov, Alexei M.

    2005-07-01

    The electron-positron-pair annihilation in the bipositronium PS2 is considered. In particular, the two-, three-, one- and zero-photon annihilation rates are determined to high accuracy. The corresponding analytical expressions are also presented. Also, a large number of bound state properties have been determined for this system.

  4. The 4 Ps as a Guiding Perspective

    Science.gov (United States)

    Kalsbeek, David H.

    2013-01-01

    A 4 Ps perspective addresses immediate needs: to help institutions gain traction in their retention strategies by framing and reframing the challenges and the possible responses, by challenging some of the traditional mental models about retention that can distract or dilute those strategies, and by offering focus and coherence to institutional…

  5. 10th Anniversary P.S.

    CERN Multimedia

    Adams,J

    1969-01-01

    John Adams parle de la préhistoire du P.S. avec présentation des dias. Le DG B.Gregory prend la parole. Les organisateurs présentent sous la direction du "Prof.Ocktette"(?) un sketch très humoristique (p.e.existence de Quark etc.....)

  6. Back to work for the PS

    CERN Multimedia

    2006-01-01

    On 22 June, the PS's rotating machine started turning again for the first time since its enforced shutdown one month ago (see Bulletin No. 23-24/2006) - and the PS was back in operation the very next day! A team from Siemens worked their socks off, 6 days a week for one month (including public holidays), to repair the electrical power supply in collaboration with the AB/PO Group's Main Power Converters (MPC) Section. The generator's faulty rotor was dismantled and replaced by the renovated spare rotor. The multitude of electrical and mechanical connections together with the sheer weight of the rotor (80 tonnes) made this an extremely complex job. The AB/PO Group used the shutdown to test a back-up solution for the PS power supply. The accelerator was directly wired up to the 18 kV electrical network via a 13 MVA transformer, installed at the end of the 1970s but never used. This solution succeeded in bringing the PS back into operation but at limited energy and frequency. Just 14 GeV could be achieved, whic...

  7. PS overcomes two serious magnet failures

    CERN Multimedia

    Maximilien Brice

    2003-01-01

    Two magnets (no.'s 6 and 19)and a bus bar connection in the PS were found to be faulty during high-voltage tests at the end of the accelerator shutdown. A five-week repair schedule was quickly devised. A team of mechanics, technicians and engineers worked at full speed to replace the faulty magnets, succeeding in limiting the delay of the accelerators' spring start-up to two weeks. Pictured here are members of the PS team with the replacement no. 6 magnet. From left to right: In the back row, Frédéric Roussel (Transport DBS), Yves Bernard (Transport DBS), Luc Moreno (Cegelec), Thierry Battimanza (Transport DBS), Raymond Brown (AB/ABP), Thomas Zickler (AT/MEL); at the front, Steven Southern (AT/VAC), Thierry Gaidon (Brun & Sorensen), Philippe Vidales (Cegelec), Daniel Aubert (Cegelec), Jerome Cachet (Transport DBS), Jose Manual Gomes de Faria (AT/MEL), Eric Page (AT/VAC).

  8. PS overcomes two serious magnet failures

    CERN Multimedia

    Maximilien Brice

    2003-01-01

    Two magnets and a bus bar connection in the PS were found to be faulty during high-voltage tests at the end of the accelerator shutdown. A five-week repair schedule was quickly devised. A team of mechanics, technicians and engineers worked at full speed to replace the faulty magnets, succeeding in limiting the delay of the accelerators´ spring start-up to two weeks. Here we see one of the replacement magnets (no. 19) being prepared.

  9. The PS overcomes two serious magnet failures

    CERN Multimedia

    2003-01-01

    Two magnets and a bus bar connection in the PS were found to be faulty during high-voltage tests at the end of the accelerator shutdown. A five-week repair schedule was quickly devised. A team of mechanics, technicians and engineers worked at full speed to replace the faulty magnets, succeeding in limiting the delay of the accelerators' spring start-up to two weeks.

  10. Motor-Generator Set, PS Main Supply

    CERN Multimedia

    CERN PhotoLab

    1983-01-01

    This is the "new" motor-generator set. It replaced the previous, original, one which had served from the PS start-up in 1959. Ordered in 1965, installed in 1967, it was brought into operation at the beginning of 1968. Regularly serviced and fitted with modern regulation and controls, it still serves at the time of writing (2006) and promises to serve for several more years, as a very much alive museum-piece. See also 6803016 and 0201010.

  11. Measuring target for the PS Booster

    CERN Multimedia

    1971-01-01

    The measuring target for the PS Booster (originally 800 MeV, now 1.4 GeV). It measures the size of the beam by destroying all particles with amplitudes greater than the size of the fork, the position and width of which are adjustable. The plunging time is only 20 ms and the acceleration at the tip of the fork reaches 90 g. The servo-controlled linear motor is shown detached from the mechanism. See also 7602008.

  12. Memories of the PS and of LEP

    CERN Document Server

    Steinberger, Jack

    2012-01-01

    The CERN PS, which started in 1959, and the Brookhaven AGS in 1960, represented an advance by a factor of more than five in the energy of proton accelerators, from the 5 GeV of the Berkeley Bevatron to about 30 GeV. These accelerators made possible the large progress in our understanding of particles and their interactions over the next two decades, culminating in the electroweak and QCD gauge theories.

  13. PS overcomes two serious magnet failures

    CERN Multimedia

    Maximilien Brice

    2003-01-01

    Two magnets and a bus bar connection in the PS were found to be faulty during high-voltage tests at the end of the accelerator shutdown. A five-week repair schedule was quickly devised. A team of mechanics, technicians and engineers worked at full speed to replace the faulty magnets, succeeding in limiting the delay of the accelerators' spring start-up to two weeks. Here we see one of the replacement magnets (no. 6) being prepared.

  14. Enhanced personal protection system for the PS

    CERN Multimedia

    Caroline Duc

    2013-01-01

    During the first long shutdown (LS1) a new safety system will be installed in the primary beam areas of the PS complex in order to bring the standard of personnel radiation protection at the PS into line with that of the LHC.   Pierre Ninin, deputy group leader of GS-ASE and responsible for the installation of the new PS complex safety system, in front of a new access control system. The LHC access control systems are state-of-the-art, whereas those of the injection chain accelerators were running the risk of becoming obsolete. For the past two years a project to upgrade the access and safety systems of the first links in the LHC accelerator chain has been underway to bring them into compliance with nuclear safety standards. These systems provide the personnel with automatic protection by limiting access to hazardous areas and by ensuring that nobody is present in the areas when the accelerator is in operation. By the end of 2013, the project teams will ha...

  15. Psühhodramaatikud annavad Pärnus eksami

    Index Scriptorium Estoniae

    2008-01-01

    29. maist kuni 1. juunini kestab Pärnus psühhodraama konverents "Geeniuste kohtumine", kus rahvusvahelise koolituse läbinud annavad eksami. Ruuda Palmquist on psühhodraama kui teadusharu rajajaid Eestis. Pärnus on kohal Rootsi Moreno Instituudi juhataja, psühhodraama lavastaja Marc Treadwell

  16. Psychometric properties of the French translation of the reduced KOOS and HOOS (KOOS-PS and HOOS-PS)

    DEFF Research Database (Denmark)

    Ornetti, P; Perruccio, A V; Roos, E M

    2009-01-01

    OBJECTIVE: To evaluate the psychometric properties of the French KOOS physical function (KOOS-PS) and HOOS physical function (HOOS-PS), specifically its feasibility, reliability, construct validity, and responsiveness. METHODS: Consecutive outpatients consulting for primary knee or hip osteoarthr......OBJECTIVE: To evaluate the psychometric properties of the French KOOS physical function (KOOS-PS) and HOOS physical function (HOOS-PS), specifically its feasibility, reliability, construct validity, and responsiveness. METHODS: Consecutive outpatients consulting for primary knee or hip...

  17. Evolving science enhanced with iPS

    Directory of Open Access Journals (Sweden)

    Editor

    2007-11-01

    Full Text Available Dear friends, Greetings from all in the team. With the stage set for online submissions and the review-response-revision-resubmission process standardized, we have come with the first regular issue and from now there will be quarterly issues of the journal. Since the starting of the JSRM in a short span there have been a lot of developments, which we would rather say as "evolutions" keeping in mind, the recent iPS! This evolution we would like you to see from a background of the various developments in the art and science of medicine throughout in the past three centuries. We have come across the era of investigative tools such as bamboo made laryngoscopes to era of vaccines and antibiotics followed by the era of revolutionary non-invasive procedures and recently the nano technology based drugs and now the iPS! Macro to Micro, but still more to go. All through the influence of the society, religions, philosophies have been playing a very important role in every step the science of biology moves ahead. Starting with the contraception, assisted reproduction then the gene modified plants....and now the embryonic stem cells! With the advent of the iPS, though the issues of oncogenes, teratoma yet to be ruled out, we have found there is a way which can bypass the ES cells! Hats off to those scientists who have burnt their midnight oil to have found this way out! The lesson we learn is to explore things with an open mind and continue to proceed further without spending much time fingers crossed. Yours sincerely,The Editorial team.

  18. Position pickup of the PS Booster

    CERN Multimedia

    CERN PhotoLab

    1975-01-01

    The beam position around the 4 rings of the PS Booster (originally 800 MeV, now 1.4 GeV), is measured with electrostatic pickups (PU). They consist of a ceramic cylinder forming part of the vacuum chamber, and, in order to save space, they are located inside the multipole lenses. The inside of the ceramic is coated with a metallic layer, into which the form of the electrodes was cut by computer-controlled micro-sandblasting. Each PU has a pair of horizontal and a pair of vertical electrodes, as well as a separate intensity-sensing circular electrode.

  19. Space charge studies in the PS

    CERN Document Server

    Asvesta, F; Damerau, H; Huschauer, A; Papaphilippou, Y; Serluca, M; Sterbini, G; Zisopoulos, P

    2017-01-01

    In this paper the results of Machine Development (MD)studies conducted at the CERN Proton Sychrotron (PS) arepresented. The main focus was the investigation of newworking points in an effort to characterize and potentiallyimprove the brightness for LHC-type beams in view of theLHC Injectors Upgrade (LIU). Various working points werecompared in terms of losses and emittance evolution. Sincespace charge and the resonances it excites are the main causefor emittance blow-up and losses, tunes close to excitedresonances were carefully studied. Mitigation techniques,such as bunch flattening using a double harmonic RF system,were also tested.

  20. PAN/PS elctrospun fibers for oil spill cleanup

    Science.gov (United States)

    Ying, Qiao; Lili, Zhao; Haixiang, Sun; Peng, Li

    2014-08-01

    A high-capacity oil sorbent was fabricated by electrospinning using PS/PAN blend. Morphology, contact angle and oil adsorption of PAN/PS fiber and PP nonwoven fabric were studied. It was found that the PAN/PS fiber had a smaller diameter than PP, and the maximum sorption capacities of the PAN/PS sorbent for pump oil, peanut oil, diesel, and gasoline were 194.85, 131.7, 66.75, and 43.38 g/g, which were far higher than those of PP. The sorbent PS/PAN fiber showed a contact angle of water144.32° and diesel oil 0°. The sorption kinetics of PAN/PS and PP sorbent were also investigated. Compared with the commercial PP fabric, the PAN/PS fiber seems to have the ability to be used in oil-spill cleanup application.

  1. Chemotherapy and quality of life in NSCLC PS 2 patients

    DEFF Research Database (Denmark)

    Helbekkmo, Nina; Strøm, Hans H; Sundstrøm, Stein H

    2009-01-01

    INTRODUCTION: Nearly 40% of patients with advanced NSCLC are in performance status (PS) 2. These patients have a shorter life expectancy than PS 0/1 patients and they are underrepresented in clinical trials. Data on how platinum-based combination chemotherapy affects Health Related Quality of Life...... (HRQOL) of patients with PS 2 are scarce and the treatment of this important group of patients is controversial. METHODS: A national multicenter phase III study on platinum based chemotherapy to 432 advanced NSCLC patients included 123 patients with PS 2. To explore the treatment impact on HRQOL......: Whereas the demographic data at baseline were well balanced between the groups, the PS 2 patients had significantly worse function and more severe symptoms than the PS 0/1 patients. In response to combination chemotherapy, the PS 2 patients had a more profound improvement of global QOL, cognitive function...

  2. The PS Booster Fast Wire Scanner

    CERN Document Server

    Burger, S; Priestnall, K; Raich, U

    2003-01-01

    The very tight emittance budget for LHC type beams makes precise emittance measurements in the injector complex a necessity. The PS machine uses 2 fast wire scanners per transverse plane for emittance measurement of the circulating beams. In order to ease comparison the same type of wire scanners have been newly installed in the upstream machine, the PS Booster, where each of the 4 rings is equipped with 2 wire scanners measuring the horizontal and vertical profiles. Those wire scanners use new and more modern control and readout electronics featuring dedicated intelligent motor movement controllers, which relieves the very stringent real time constraints due to the very high speed of 20m/s. In order to be able to measure primary beams at the very low injection energy of the Booster (50MeV) secondary emission currents from the wire can be measured as well as secondary particle flows at higher primary particle energies during and after acceleration. The solution adopted for the control of the devices is descri...

  3. Sofrimento psíquico e trabalho

    Directory of Open Access Journals (Sweden)

    Sarah Rosa Salles Vieira

    2014-03-01

    Full Text Available O presente artigo aprofunda questões clínico-téoricas relacionadas especificamente ao trabalho docente e ao sofrimento psíquico a ele relacionado a partir da observação clínica e vivência grupal nos atendimentos terapêuticos ocupacionais realizados no Hospital do Servidor Público Estadual de São Paulo "Francisco Morato de Oliveira" (HSPE-FMO. Partindo dos estudos acerca da Psicopatologia do Trabalho de Christophe Dejours, do trabalho docente e do relato de um caso clínico, caracteriza a problemática do sofrimento no trabalho, os sistemas de defesa contra este sofrimento, a ameaça à subjetividade do próprio trabalhador, as representações e conflitos vivenciados no trabalho docente, bem como a relação aditiva estabelecida como uma estratégia inconsciente de sobrevivência psíquica.

  4. KAJIAN INDUCED PLURIPOTENT STEMCELL (iPS (HARAPAN DAN TANTANGAN

    Directory of Open Access Journals (Sweden)

    Masagus Zainuri

    2014-05-01

    Full Text Available AbstractInduced Pluripotent Stemcell (iPS are adult cells which the genetic information in the nucleus of those cells being reprogrammed (reprogram by inserting exogenous pluripotential genes. The exogenous gene transduction is using vectors, such as lentivirus, retrovirus, or adenovirus, which suppressed the gene expression of the original cells, so they will express the transduced exogenous gene. Viral vectors are then used to reprogramming and producing iPS clones that are pluripotent. iPS derived from adult cells of patient with certain diseases will be used as a tool to study the mechanisms of those specific diseases and the effects of selected drugs against the diseases. Several previous studies have shown that iPS clones developed from specific genetic disease have its original genotype and retain the character of the response to the drug that similar as the original adult cells. Opportunities for the utilization of autologous iPS cell therapy in the future is wide open as expected iPS transplant will not be rejected when transplanted back to the patient. Behind all its potential, iPS production is still facing some problems to be applicable clinically. The use of viruses as vectors may cause problems due to virus gene sequences may be integrated into the genome of the DNA donor cell, thereby causing mutations of the iPS clones. Several subsequent studies have succeeded in replacing the use of viruses as vectors, but the level of efficiency obtained is still very low. Another problem that arises is that epigenetic changes may occur in iPS cultures. Many advanced research related to iPS may be developed in Indonesia and is necessary to improve the production efficiency of iPS and solve iPS clones epigenetic changes problems in the future.Keywords: iPS, pluripotency, transduction, transfection.AbstrakInduced Pluripotent Stemcell (iPS adalah sel somatic dewasa yang informasi genetika dalam inti selnyadiprogram ulang (reprogram dengan cara

  5. Comparison of molecular species of various transphosphatidylated phosphatidylserine (PS) with bovine cortex PS by mass spectrometry

    NARCIS (Netherlands)

    Chen, S.; Li, K.W.

    2008-01-01

    The exogenous introduction of a molecular species mixture of bovine cortex phosphatidylserine (BC-PS) has been claimed to improve memory function in subjects suffering from age-associated memory impairment and dementia. However, it has been also reported that oral administration of another molecular

  6. PS main supply: motor-generator set.

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    In picture 04 the motor is on the right in the background and the main view is of the generator. The peak power in each PS cycle drawn from the generator, up to 96 MW, is taken from the rotational kinetic energy of the rotor (a heavy-weight of 80 tons), which makes the rotational speed drop by only a few percent. The motor replenishes the average power of 2 to 4 MW. Photo 05: The motor-generator set is serviced every year and, in particular, bearings and slip-rings are carefully checked. To the left is the motor with its slip-rings visible. It has been detached from the axle and moved to the side, so that the rotor can be removed from the huge generator, looming at the right.

  7. PS: A nonprocedural language with data types and modules

    Science.gov (United States)

    Gokhale, M. B.

    1986-01-01

    The Problem Specification (PS) nonprocedural language is a very high level language for algorithm specification. PS is suitable for nonprogrammers, who can specify a problem using mathematically-oriented equations; for expert programmers, who can prototype different versions of a software system for evaluation; and for those who wish to use specifications for portions (if not all) of a program. PS has data types and modules similar to Modula-2. The compiler generates C code. PS is first shown by example, and then efficiency issues in scheduling and code generation are discussed.

  8. Distinct iPS Cells Show Different Cardiac Differentiation Efficiency.

    Science.gov (United States)

    Ohno, Yohei; Yuasa, Shinsuke; Egashira, Toru; Seki, Tomohisa; Hashimoto, Hisayuki; Tohyama, Shugo; Saito, Yuki; Kunitomi, Akira; Shimoji, Kenichiro; Onizuka, Takeshi; Kageyama, Toshimi; Yae, Kojiro; Tanaka, Tomofumi; Kaneda, Ruri; Hattori, Fumiyuki; Murata, Mitsushige; Kimura, Kensuke; Fukuda, Keiichi

    2013-01-01

    Patient-specific induced pluripotent stem (iPS) cells can be generated by introducing transcription factors that are highly expressed in embryonic stem (ES) cells into somatic cells. This opens up new possibilities for cell transplantation-based regenerative medicine by overcoming the ethical issues and immunological problems associated with ES cells. Despite the development of various methods for the generation of iPS cells that have resulted in increased efficiency, safety, and general versatility, it remains unknown which types of iPS cells are suitable for clinical use. Therefore, the aims of the present study were to assess (1) the differentiation potential, time course, and efficiency of different types of iPS cell lines to differentiate into cardiomyocytes in vitro and (2) the properties of the iPS cell-derived cardiomyocytes. We found that high-quality iPS cells exhibited better cardiomyocyte differentiation in terms of the time course and efficiency of differentiation than low-quality iPS cells, which hardly ever differentiated into cardiomyocytes. Because of the different properties of the various iPS cell lines such as cardiac differentiation efficiency and potential safety hazards, newly established iPS cell lines must be characterized prior to their use in cardiac regenerative medicine.

  9. LEADIR-PS: providing unprecedented SMR safety and economics

    Energy Technology Data Exchange (ETDEWEB)

    Hart, R.S., E-mail: N2i2@xplornet.ca [Northern Nuclear Industries Incorporated, Cambridge, ON (Canada)

    2015-07-01

    Northern Nuclear Industries Incorporated (N{sup 2} I{sup 2}) is developing Small Modular Reactors (SMRs) called LEADIR-PS, an acronym for LEAD-cooled Integral Reactor-Passively Safe. LEADIR-PS integrates proven technologies including TRISO fuel, Pebble Bed core and graphite moderator, with molten lead coolant in an integral pool type reactor configuration to achieve unprecedented safety and economics. Plants under development are LEADIR-PS30, producing 30 MWth, LEADIR-PS100 producing 100 MWth and LEADIR-PS300 producing 300 MWth that are focused on serving the energy demands of areas with a small electrical grid and/or process heat applications. A plant consisting of six LEADIR-PS300 reactor modules serving a common turbine-generator, called the LEADIR-PS Six-Pack, is focused on serving areas with higher energy demands and a robust electricity grid. The Gen{sup +} I LEADIR-PS plants are inherently/passively safe. There is no potential for a Loss Of Coolant Accident, a reactivity transient without shutdown, a loss of heat sink, or hydrogen generation. No active systems or operator actions are required to assure safety. The unprecedented safety of LEADIR-PS reactors avoids large exclusion radius and demanding evacuation plan requirements. LEADIR-PS, with steam conditions of 370 {sup o}C and 12 MPa can serve over 85% of the world's non-transportation process heat demands. In Canada, the electricity and process heat demands, ranging from those of remote communities and the oil sands to densely populated areas can be served by LEADIR-PS. (author)

  10. The HARP detector at the CERN PS

    CERN Document Server

    Catanesi, M G; Radicioni, E; Simone, S; Edgecock, R; Ellis, M; Robbins, S; Soler, F J P; Gößling, C; Mass, M; Bunyatov, S; Chukanov, A; Klimov, O; Krasin, I; Krasnoperov, A; Kustov, D; Popov, B; Serdiouk, V; Tereshchenko, V; Carassiti, V; Di Capua, E; Evangelisti, F; Vidal-Sitjes, G; Artamonov, A; Arce, P; Brocard, R; Decreuse, G; Friend, B; Giani, S; Gilardoni, S; Gorbunov, p; Grant, A; Grossheim, A; Gruber, P; Ivanchenko, V; Legrand, J C; Kayis-Topaksu,A; Panman, P; Papadopoulos, I; Pasternak, J; Chernyaev, E; Tsukerman, I; van der Vlugt, R; Veenhof, R; Wiebusch, C; Zucchelli, P; Blondel, A; Borghi, S; Campanelli, M; Cervera-Villanueva, A; Morone, M C; Prior, G; Schroeter, R; Kato, I; Gastaldi, Ugo; Mills, G B; Graulich, J S; Grégoire, G; Bonesini, M; Chignoli, F; Ferri, F; Paleari, F; Kirsanov, M; Postoev, V; Bagulya A; Grichine, V; Polukhina, N; Palladino, V; Coney, L; Schmitz, D; Barr, G; De Santo, A; Pattison, C; Zuber, K; Barichello, G; Bobisut, F; Gibin, D; Guglielmi, A; Laveder, M; Menegolli, A; Mezzetto M; Pepato, Adriano; Dumarchez, J; Troquereau, S; Vannucci, F; Dore, U; Iaciofano, A; Lobello, M; Marinilli, F; Orestano, D; Panayotov, D; Pasquali, M; Pastore, F; Tonazzo, A; Tortora, L; Booth, C; Buttar, C; Hodgson, P; Howlett, L; Nicholson, R; Bogomilovw, M; Burin, K; Chizhov, M; Kolev, D; Petev, P; Rusinov, I; Tsenov, R; Piperov, S; Temnikov, P; Apollonio, M; Chimenti, P; Giannini, G; Santin, G; Burguet-Castell, J; Gómez-Cadenas, J J; Novella, P; Sorel, M; Tornero, A

    2007-01-01

    HARP is a high-statistics, large solid angle experiment to measure hadron production using proton and pion beams with momenta between 1.5 and 15 GeV/c impinging on many different solid and liquid targets from low to high Z. The experiment, located in the T9 beam of the CERN PS, took data in 2001 and 2002. For the measurement of momenta of produced particles and for the identification of particle types, the experiment includes a large-angle spectrometer, based on a Time Projection Chamber and a system of Resistive Plate Chambers, and a forward spectrometer equipped with a set of large drift chambers, a threshold Cherenkov detector, a time-of-flight wall and an electromagnetic calorimeter. The large angle system uses a solenoidal magnet, while the forward spectrometer is based on a dipole magnet. Redundancy in particle identification has been sought, to enable the cross-calibration of efficiencies and to obtain a few percent overall accuracy in the cross-section measurements. Detector construction, operation an...

  11. Interleaving of beam lines inside the PS tunnel

    CERN Multimedia

    1983-01-01

    View against the direction of the proton beams. The PS ring (section 26) is on the left. The injection tunnel for LEAR leaving from here has increased the trafic in this already busy area where the two Linacs and the transfer tunnel leading to the SPS, ISR and AA join the PS ring (cf. photo 7802260, 7802261, Annual Report 1981, p. 89, fig. 12).

  12. Modulation of enzymatic PS synthesis by liposome membrane composition.

    Science.gov (United States)

    Pinsolle, Alexandre; Roy, Philippe; Cansell, Maud

    2014-03-01

    Phosphatidylserine (PS) is a phospholipid known to exert important physiological roles in humans. However, this phospholipid (PL) is poorly available as a natural source and hardly produced by the chemical route. In this work, PS was obtained by transphosphatidylation using phospholipase D (PLD) and PL self-assembled into liposomes as the substrates. The aim was to better understand how the liposome membrane composition could modulate PS yield. Three lecithins were used as PL substrates, one originated from a marine source providing a high amount of n-3 polyunsaturated fatty acids, and two issued from soya differing in their phosphatidylcholine (PC) content. Different parameters such as Ca(2+) content, enzyme and L-serine concentrations modulated PS synthesis. The presence of Ca(2+) increased PS conversion yield. The alcohol acceptor (L-serine) concentration positively acted on PL conversion, by governing the equilibrium between transphosphatidylation and hydrolysis. Beside these specific reaction conditions, it was demonstrated that the membrane composition of the liposomes modulated PS synthesis. A direct correlation between PS accumulation and the amount of cholesterol or α-tocopherol incorporated into the soya lecithins was observed. This result was interpreted in terms of "head" spacers promoting PLD transphosphatidylation. On the whole, this work provided key parameters for the formulation of liposomes using enzymatic PLD technology, to produce lecithins enriched in different proportions of PS and esterified with various types of fatty acids depending on the initial lecithin source. Copyright © 2013 Elsevier B.V. All rights reserved.

  13. Spectroscopic Classification of PS16chs with SOAR/Goodman

    Science.gov (United States)

    Miller, J. A.; Hounsell, R. A.; Pan, Y.-C.; Foley, R. J.; Jha, S. W.; Rest, A.; Scolnic, D.

    2016-05-01

    We report the classification of PS16chs from spectroscopic observation with the Goodman spectrograph on the SOAR telescope. The observation was made on 2016 May 08 UT. We classify PS16chs as a SN Ia near maximum light at z = 0.19.

  14. Motor-Generator powering the PS (Proton Synchrotron) main magnets

    CERN Multimedia

    1983-01-01

    This motor-generator,30 MW peak, 1500 r.p.m.,pulsed power supply for the PS main magnet replaced in 1968 the initial 3000 r.p.m. motor-generator-flywheel set which had served from the PS start-up in 1959 until end 1967. See also photo 8302337 and its abstract.

  15. Transfer line TT70 (electrons from PS to SPS)

    CERN Multimedia

    CERN PhotoLab

    1981-01-01

    As injectors for LEP, PS and SPS had to be converted to the acceleration of electrons and positrons. So far, only positively charged particles had been transferred from the PS to the SPS, for the negatively charged electrons a new transfer line, TT70, had to be built. Due to the difference in level of the two machines, the transfer line slopes and tilts.

  16. Psühhodraama - spontaansuse kool / Taimi Elenurm

    Index Scriptorium Estoniae

    Elenurm, Taimi

    2010-01-01

    Viinis ja New Yorgis tegutsenud psühhiaatri Jakob Levy Moreno loodud psühhodraamast, mis võimaldab rollimängu kaudu näha ennast läbi teiste silmade, aga ka vabaneda pingetest andes võimaluse käituda teisiti kui tavaelus

  17. Successful online learning – the five Ps

    Directory of Open Access Journals (Sweden)

    Jim FLOOD

    2004-04-01

    Full Text Available Successful online learning – the five Ps Jim FLOOD E-learning Consultant-UK jimflood@btinternet.com Key learning points • An important aspect of design for online learning is visual ergonomics. • Learning theories offer poor predictive power in terms of how learners work and learn. • Success at learning is closely related to emotional engagement–and learning designers tend to ignore this aspect. • Online learning poses a challenging experience for learners–and they need support to cope with it. • A key goal to achieve Praxis – being able to put learning into practice. Many of you will be familiar with the three (or more Ps of marketing and even if not, as trainers or teachers you are likely to have used mnemonics as an aid to retention and recall. Mnemonics are especially useful when you need to get the key points to ‘stick’ in the minds of your audience. With this in mind I offer you the 5 Ps of online learning: Presentation, Pedagogy, Promotion, Preparation and Props. What I offer is not new; in fact much of it results from the eleven years of online teaching and learning at The Open University, the £22 million it has spent on research and evaluation 1, and the worldwide community that have been sharing experience in recent years. You can therefore consider these 5 Ps to be a convenient re-packing of the information and experience that can be found in abundance on the Internet. Presentation Good graphic design appeals to the subtle process by which the brain processes information and, as a result, we decide if we like the ‘look and feel’ of a visual environment. Part of liking this ‘look and feel’ is the way the text and pictorial layout can appear inviting and encouraging–a vital aspect of any online learning environment. Another aspect of presentation is how the text reads in terms of engaging the learner and introducing the story to be told–as well as being written in clear and concise English When browsing through books

  18. Telomere reprogramming and maintenance in porcine iPS cells.

    Directory of Open Access Journals (Sweden)

    Guangzhen Ji

    Full Text Available Telomere reprogramming and silencing of exogenous genes have been demonstrated in mouse and human induced pluripotent stem cells (iPS cells. Pigs have the potential to provide xenotransplant for humans, and to model and test human diseases. We investigated the telomere length and maintenance in porcine iPS cells generated and cultured under various conditions. Telomere lengths vary among different porcine iPS cell lines, some with telomere elongation and maintenance, and others telomere shortening. Porcine iPS cells with sufficient telomere length maintenance show the ability to differentiate in vivo by teratoma formation test. IPS cells with short or dysfunctional telomeres exhibit reduced ability to form teratomas. Moreover, insufficient telomerase and incomplete telomere reprogramming and/or maintenance link to sustained activation of exogenous genes in porcine iPS cells. In contrast, porcine iPS cells with reduced expression of exogenous genes or partial exogene silencing exhibit insufficient activation of endogenous pluripotent genes and telomerase genes, accompanied by telomere shortening with increasing passages. Moreover, telomere doublets, telomere sister chromatid exchanges and t-circles that presumably are involved in telomere lengthening by recombination also are found in porcine iPS cells. These data suggest that both telomerase-dependent and telomerase-independent mechanisms are involved in telomere reprogramming during induction and passages of porcine iPS cells, but these are insufficient, resulting in increased telomere damage and shortening, and chromosomal instability. Active exogenes might compensate for insufficient activation of endogenous genes and incomplete telomere reprogramming and maintenance of porcine iPS cells. Further understanding of telomere reprogramming and maintenance may help improve the quality of porcine iPS cells.

  19. Telomere reprogramming and maintenance in porcine iPS cells.

    Science.gov (United States)

    Ji, Guangzhen; Ruan, Weimin; Liu, Kai; Wang, Fang; Sakellariou, Despoina; Chen, Jijun; Yang, Yang; Okuka, Maja; Han, Jianyong; Liu, Zhonghua; Lai, Liangxue; Gagos, Sarantis; Xiao, Lei; Deng, Hongkui; Li, Ning; Liu, Lin

    2013-01-01

    Telomere reprogramming and silencing of exogenous genes have been demonstrated in mouse and human induced pluripotent stem cells (iPS cells). Pigs have the potential to provide xenotransplant for humans, and to model and test human diseases. We investigated the telomere length and maintenance in porcine iPS cells generated and cultured under various conditions. Telomere lengths vary among different porcine iPS cell lines, some with telomere elongation and maintenance, and others telomere shortening. Porcine iPS cells with sufficient telomere length maintenance show the ability to differentiate in vivo by teratoma formation test. IPS cells with short or dysfunctional telomeres exhibit reduced ability to form teratomas. Moreover, insufficient telomerase and incomplete telomere reprogramming and/or maintenance link to sustained activation of exogenous genes in porcine iPS cells. In contrast, porcine iPS cells with reduced expression of exogenous genes or partial exogene silencing exhibit insufficient activation of endogenous pluripotent genes and telomerase genes, accompanied by telomere shortening with increasing passages. Moreover, telomere doublets, telomere sister chromatid exchanges and t-circles that presumably are involved in telomere lengthening by recombination also are found in porcine iPS cells. These data suggest that both telomerase-dependent and telomerase-independent mechanisms are involved in telomere reprogramming during induction and passages of porcine iPS cells, but these are insufficient, resulting in increased telomere damage and shortening, and chromosomal instability. Active exogenes might compensate for insufficient activation of endogenous genes and incomplete telomere reprogramming and maintenance of porcine iPS cells. Further understanding of telomere reprogramming and maintenance may help improve the quality of porcine iPS cells.

  20. Shallow PS-logging by high frequency wave; Koshuha wo mochiita senbu PS kenso

    Energy Technology Data Exchange (ETDEWEB)

    Nakajima, A.; Miyazawa, M.; Azuma, H. [OYO Corp., Tokyo (Japan)

    1996-05-01

    This paper describes the following matters on down-hole PS logging in shallow subsurface. Determining an elastic wave velocity structure in shallow subsurface with high accuracy by using down-hole PS logging requires reduction of errors in reading travel time. Therefore, a high-frequency vibration source was fabricated with an objective to raise frequencies of waves used for the measurement. Measurements were made on two holes, A and B, at a measurement interval of 0.5 m, whereas at the hole A a measurement was performed simultaneously by using a normal type (low-frequency) vibration source. A spectral analysis on the waveform record revealed that the frequencies with each vibration source were 127 Hz and 27 Hz for the hole A, 115 Hz for the hole B, and the S/N ratio was all the same for both holes. When the high-frequency vibration source was used, the velocity was determined at accuracy of 5% over the whole length of the shallow section. When the low-frequency vibration source was used, sections with the velocity determining error greater than 5% were found, and it was not possible to derive the velocity structure in the shallow subsurface in fine segments. 3 refs., 8 figs., 2 tabs.

  1. Overview of the Moral Status of iPS Cells.

    Science.gov (United States)

    Martinho, Andreia Martins

    2016-07-01

    The production of induced pluripotent stem (iPS) cells in 2006 by Takahashi and Yamanaka was a major breakthrough in stem cell research. IPS cells technology holds great promise for cell therapy, disease modelling, and drug testing, but it poses ethical questions concerning the moral status of somatic cells, which can re-gain pluripotency (iPS cells). This article provides an overview of the arguments that substantiate the debate on the moral assessment of iPS cells: potentiality argument; relational properties/standard view; and genetic basis for moral status.

  2. PS buildings : reinforced concrete structure for shielding "bridge" pillar

    CERN Multimedia

    CERN PhotoLab

    1956-01-01

    The PS ring traverses the region between the experimental halls South and North (buildings Nos 150 and 151) under massive bridge-shaped concrete beams. This pillar stands at the S-W end of the structure.

  3. New safety training for access to the PS complex areas

    CERN Multimedia

    2012-01-01

    Since 10/08/2012, a new course dedicated to the specific radiological risks in the accelerators of the PS complex has been available on SIR (https://sir.cern.ch/). This course complements the general classroom-based Radiation Safety training. Successful completion of the course will be obligatory and verified by the access system as from 01/11/2012 for access to the following accelerator areas: LINAC2, BOOSTER, PS and TT2. Information and reminder e-mails will be sent to all persons currently authorized to access the accelerators of the PS complex. For questions please contact the HSE unit and in particular, the Radiation Protection Group (+41227672504 or safety-rp-ps-complex@cern.ch).

  4. Study of Value Co-Creation in CoPS

    OpenAIRE

    Mingli Zhang; Jianhua Ye

    2013-01-01

    Value co-creation is associated with specific investment in the context of CoPS. The feature of CoPS decides that the study of co-creation cannot execute without regarding asset specificity. This study considers that value co-creation will be associated with specific value, which is outcome of relationship value and asset specificity. Supplier and customer have a close relation, which conducts to specific investment and then it turns to obstacle for competitors. Trust, commitment and satisfac...

  5. Motor-generator set of the PS main supply

    CERN Multimedia

    Photographic Service; CERN PhotoLab

    1968-01-01

    Already in 1964, the PS improvement programme included a new main magnet supply with more power for the longer cycles needed for slow extraction at the full energy of 26 GeV. This motor-generator set was installed in 1967 and took up service at the beginning of 1968. Regularly serviced and fitted with modern electronic regulation, it pulses the PS to this day.

  6. The Libera as a PS orbit measurement system building block

    CERN Document Server

    Belleman, J M; CERN. Geneva. AB Department

    2005-01-01

    During the year 2004, extensive tests using a Libera data processor have been made in order to study its suitability as a building block for a complete PS trajectory and orbit measurement system. The Libera consists of four fast 12-bits ADCs, a Virtex II Pro FPGA and a large memory. This note presents some of the results of the analysis of acquisitions made on a position pick-up in the CERN PS.

  7. DiPS: A Unifying Approach for developing System Software

    OpenAIRE

    Michiels, Sam; Matthijs, Frank; Walravens, Dirk; Verbaeten, Pierre

    2002-01-01

    In this paper we unify three essential features for flexible system software: a component oriented approach, self-adaptation and separation of concerns.We propose DiPS (Distrinet Protocol Stack), a component framework, which offers components, an anonymous interaction model and connectors to handle non-functional aspects such as concurrency. DiPS has effectively been used in industrial protocol stacks and device drivers.

  8. The new heart of the PS is beating strongly

    CERN Document Server

    Corinne Pralavorio

    2011-01-01

    The PS has resumed operation with a brand new electrical power system called POPS; this enormous system comprising power electronics and capacitors is crucial because if it broke down practically no particles would be able to circulate at CERN. As soon as it started, POPS passed all the tests with flying colours and is now pulsing at full power.   The new PS power system is made up of 6 containers, each with 60 tonnes of capacitors and 8 power converters. The date 11/02/11 will always be remembered with affection by the engineers in the Electrical Power Converters Group. At 11:11 in the morning (no joke), the first beams powered by the new system began to circulate in the PS. The cutely-named POPS (POwer for PS) took over from the old rotating machine that had been working since 1968. From now on it will be POPS that supplies the PS main magnets with the electrical pulses needed to accelerate the beams for the LHC and all CERN's other facilities. The system is crucial as the PS is one of the lyn...

  9. The PS will soon be back in operation

    CERN Multimedia

    2006-01-01

    The PS's power supply system is undergoing repairs for the accelerator to restart on 26 June. The AB Department's Power Converter Group is working flat out with Siemens to return the PS's power supply system to working order. A problem appeared on the insulation of the power cables of the rotor of the rotating machine (photo) which supplies power to the PS magnets. To prevent more significant damage to the rotating machine, the AB Department, with the approval of the CERN Management, decided to shut down the PS which had started running on 15 May. Everything is being done to restart the accelerator on 26 June. The PS's rotating machine comprises a motor coupled to a generator. The generator's rotor acts like a flywheel, supplying high-power pulses of 40 to 50 megawatts to the PS magnets. The 6 megawatt motor drives the installation at 1000 revolutions per minute and compensates only for variations in speed. It is an essential interface since it would be hard to imagine connecting such an electrical charge, p...

  10. iPS-Cinderella Story in Cell Biology

    Directory of Open Access Journals (Sweden)

    Editorial

    2010-01-01

    Full Text Available As we step through the frontiers of modern Science, we are all witnesses to the Cinderella story repeating itself in the form of the iPS. The process of re-programming adult somatic cells to derive Induced Pluripotent stem cells (iPS with the wand of transcription factors and then differentiating them back to adult somatic cells resembles the transformation of Cinderella from a Cinder girl to princess and back to a Cinder girl after the ball; but the iPS-Cinderella is the most fascinating thing ever in cell biology!From the day iPS first made its headlines when it was first produced by Shinya Yamanaka at Kyoto University in Japan, Stem Cell scientists all over the world are re- doing their experiments so far done using other sources like embryonic and adult Stem cells with the iPS cells exploring their potential to the fullest. A Stem Cell science news page without this magic word of iPS is difficult to imagine these days and Scientists have been successful in growing most of the adult Cell types from iPS cells.iPS cells was the key to solve the problems of Immune rejection and Immunosupression required when using other allogeneic Stem cell types which had baffled scientists previously. But the issues raised by scientists about the use of viruses and Oncogenes in producing iPS cells were made groundless when scientists in February 2008 published the discovery of a technique that could remove oncogenes after the induction of pluripotency and now it is possible to induce pluripotency using plasmid transfection, piggyback transposon system and piggyback transposon system combined with a non viral vector system. The word of the day is pIPS which are protein-induced Pluripotent stem cells which are iPS cells that were generated without any genetic alteration of the adult cell. This research by the group of Sheng Ding in La Jolla, California made public in April 2009 showed that the generation of poly-arginine anchors was sufficient to induce

  11. Simulation of a wide area survey for NEOs with Pan-STARRS PS1 & PS2 Telescopes

    Science.gov (United States)

    Chambers, Kenneth C.; Lilly (Schunova), Eva; Dukes, Martin Todd; Wainscoat, Richard J.

    2017-10-01

    We have performed a new survey simulation for a wide area survey with PS1 & PS2 as part of our quest to optimize the discovery rate of Near Earth Objects with the full Pan-STARRS system. The survey is intended to be as unbiased and as complete as possible given the available sky visibility and the anticipated performance of the PS1 and PS2 telescopes working together. The simulation includes a complete model of both telescopes, camera and slew overhead, sky visibility, moon phase, galactic plane exclusion, and weather. The performance of the resulting survey strategy is then evaluated using the method of Lilly et. al. 2017. This uses the Greenstreet et al. 2012 model with 50 million NEOs with absolute magnitudes 13 < H < 29 and the Moving Object Processing System (MOPS, Denneau et al. 2013) for linkages. The results are compared with other possible strategies.

  12. Profiling the microRNA Expression in Human iPS and iPS-derived Retinal Pigment Epithelium.

    Science.gov (United States)

    Wang, Heuy-Ching; Greene, Whitney A; Kaini, Ramesh R; Shen-Gunther, Jane; Chen, Hung-I H; Cai, Hong; Wang, Yufeng

    2014-01-01

    The purpose of this study is to characterize the microRNA (miRNA) expression profiles of induced pluripotent stem (iPS) cells and retinal pigment epithelium (RPE) derived from induced pluripotent stem cells (iPS-RPE). MiRNAs have been demonstrated to play critical roles in both maintaining pluripotency and facilitating differentiation. Gene expression networks accountable for maintenance and induction of pluripotency are linked and share components with those networks implicated in oncogenesis. Therefore, we hypothesize that miRNA expression profiling will distinguish iPS cells from their iPS-RPE progeny. To identify and analyze differentially expressed miRNAs, RPE was derived from iPS using a spontaneous differentiation method. MiRNA microarray analysis identified 155 probes that were statistically differentially expressed between iPS and iPS-RPE cells. Up-regulated miRNAs including miR-181c and miR-129-5p may play a role in promoting differentiation, while down-regulated miRNAs such as miR-367, miR-18b, and miR-20b are implicated in cell proliferation. Subsequent miRNA-target and network analysis revealed that these miRNAs are involved in cellular development, cell cycle progression, cell death, and survival. A systematic interrogation of temporal and spatial expression of iPS-RPE miRNAs and their associated target mRNAs will provide new insights into the molecular mechanisms of carcinogenesis, eye differentiation and development.

  13. Preventing protein adsorption from a range of surfaces using an aqueous fish protein extract

    DEFF Research Database (Denmark)

    Pillai, Saju; Arpanaei, Ayyoob; Meyer, Rikke L.

    2009-01-01

    We utilize an aqueous extract of fish proteins (FPs) as a coating for minimizing the adsorption of fibrinogen (Fg) and human serum albumin (HSA). The surfaces include stainless steel (SS), gold (Au), silicon dioxide (SiO2), and poly(styrene) (PS). The adsorption processes (kinetics and adsorbed...

  14. Preparation of carbon paste electrodes including poly(styrene) attached glycine-Pt(IV) for amperometric detection of glucose.

    Science.gov (United States)

    Dönmez, Soner; Arslan, Fatma; Sarı, Nurşen; Kurnaz Yetim, Nurdan; Arslan, Halit

    2014-04-15

    In this study, a novel carbon paste electrode that is sensitive to glucose was prepared using the nanoparticles modified (4-Formyl-3-methoxyphenoxymethyl) with polystyren (FMPS) with L-Glycine-Pt(IV) complexes. Polymeric nanoparticles having Pt(IV) ion were prepared from (4-Formyl-3-methoxyphenoxymethyl) polystyren, glycine and PtCl4 by template method. Glucose oxidase enzyme was immobilized to a modified carbon paste electrode (MCPE) by cross-linking with glutaraldehyde. Determination of glucose was carried out by oxidation of enzymatically produced H2O2 at 0.5 V vs. Ag/AgCl. Effects of pH and temperature were investigated, and optimum parameters were found to be 8.0 and 55°C, respectively. Linear working range of the electrode was 5.0×10(-6)-1.0×10(-3) M, R(2)=0.997. Storage stability and operational stability of the enzyme electrode were also studied. Glucose biosensor gave perfect reproducible results after 10 measurements with 2.3% relative standard deviation. Also, it had good storage stability (gave 53.57% of the initial amperometric response at the end of 33th day). © 2013 Published by Elsevier B.V.

  15. Electro-oxidation of chlorophenols on poly(3,4-ethylenedioxythiophene)-poly(styrene sulphonate) composite electrode

    Energy Technology Data Exchange (ETDEWEB)

    Pigani, L. [Dipartimento di Chimica, Universita di Modena e Reggio Emilia, via G. Campi, 18, 41100 Modena (Italy); Musiani, M. [Istituto per l' Energetica e le Interfasi, IENI-CNR, Corso Stati Uniti 4, 35127 Padova (Italy); Pirvu, C. [Department of General Chemistry, University Politehnica of Bucharest, Calea Grivitei 132, 78126 Bucharest (Romania); Terzi, F. [Dipartimento di Chimica, Universita di Modena e Reggio Emilia, via G. Campi, 18, 41100 Modena (Italy); Zanardi, C. [Dipartimento di Chimica, Universita di Modena e Reggio Emilia, via G. Campi, 18, 41100 Modena (Italy); Seeber, R. [Dipartimento di Chimica, Universita di Modena e Reggio Emilia, via G. Campi, 18, 41100 Modena (Italy)]. E-mail: reseeber@unimore.it

    2007-01-01

    The electrochemical behaviour of chlorinated phenols on Pt/poly(3,4-ethylenedioxy)thiophene,LiClO{sub 4} and on Pt/poly(3,4-ethylenedioxy)thiophene,poly(sodium-4-styrenesulphonate) electrodes has been investigated in phosphate buffer solution. Poly(sodium-4-styrenesulphonate) exerts remarkable effect against the electrode fouling induced by oxidation of chlorophenols, allowing us to record the relevant anodic response even after repeated potential cycles. Hypotheses about the role exerted by poly(sodium 4-styrenesulphonate) are made, on the basis of evidences provided by several techniques, such as cyclic voltammetry, electrochemical impedance spectroscopy, electrochemical microgravimetry and atomic force microscopy. Thanks to the fact that different chlorophenols show differences in the voltammetric responses, depending on number and position of the chloro substituents on the aromatic ring, applications of the modified electrode in the analysis of mixtures of chlorinated phenols are possible.

  16. Transport Properties of Sulfonated Poly (Styrene-b-isobutylene-b-styrene) Triblock Copolymers at High Ion-Exchange Capacities

    National Research Council Canada - National Science Library

    Winey, Karen I; Elabd, Yossef A; Napadensky, Eugene; Walker, Charles W

    2005-01-01

    ... (IEC), specifically at high IECs (up to -2 mequiv/g). The proton conductivity of S-SIBS was -1 order of magnitude higher than sulfonated polystyrene at similar IECs and 3-fold higher than Nafion 117 at an IEC of 2 mequiv/g...

  17. Synthesis of Poly(styrene-acrylates-acrylic acid Microspheres and Their Chemical Composition towards Colloidal Crystal Films

    Directory of Open Access Journals (Sweden)

    Luis A. Ríos-Osuna

    2016-01-01

    Full Text Available In this paper, polystyrene colloidal microspheres have been prepared using hexyl acrylate (HA, ethylhexyl acrylate (EHA, isooctyl acrylate (IOA, butyl acrylate (BA, or isobutyl acrylate (IBA as comonomers. Microspheres with diameters from 212 to 332 nm and with a polystyrene content of 65–78% were prepared. The particles prepared in this work do not present the typical core-shell structure; as a consequence, DSC analysis showed that the microspheres exhibited only one Tg. TEM images show that the particles with comonomer content below ~30% were spherical and regular. Microspheres containing comonomer between 21 to 25% produced the less brittle films showing very iridescent colors. The films prepared from microspheres containing hexyl, ethylhexyl, and isooctyl acrylate as comonomers are firmly attached to the substrate due to their adhesive properties. The large decrease of the fragility observed in these films makes them much more attractive materials in sensing applications.

  18. Synthesis, Characterization and Application of Poly (Styrene-4- Vinyl Pyridine) Membranes Assembled With Single-Wall Carbon Nanotubes

    KAUST Repository

    He, Haoze

    2011-06-01

    Poly(styrene‐4‐vinylpyridine) (PS‐P4VP) isoporous membranes were prepared and their properties were evaluated in this research. The solution was prepared by dissolving PS‐P4VP polymer with necessary additives into a 1:1:1 1,4‐dioxane – N,N‐dimethyl formamide – tetrahydrofuran (DOX‐DMF‐THF, DDT) solvent. Then 0.5‐1.0 mL of the primary solution was cast onto the non‐woven substrate membrane on a glass slide, evaporated for 15‐20 sec and immersed into de‐ionized water for more than 30 min for the solidification of isoporous structure and for the formation of the primary films, which could be post‐processed in different ways for different tests. The membrane surface presents a well‐ordered, hexagonal self‐assembly structure, which is fit for aqueous and gaseous filtration. The pore size of the isoporous surface is 30~40 nm. The pore size is also sensitive to [H+] in the solution and a typical pair of S‐shape pH‐correlation curves with significant hysteresis was found. Four techniques were tried to improve the properties of the membranes in this research: 1) 1,4‐diiodobutane was introduced to chemically change the structure as a cross‐linking agent. 2) single‐wall carbon nanotube (SWCNT) was linked to the membranes in order to strengthen the stability and rigidity and to reduce the hysteresis. 3) Homo‐poly(4‐vinylpyridine) (homo‐P4VP) was added and inserted into the PS‐P4VP micelles to affect the pore size and surface structure. 4) Copper acetate (Cu(Ac)2) was used as substitute of dioxane to prepare the Cu(Ac)2‐DMF‐THF (CDT) mixed solvent, for a better SWCNT dispersion. All the possible improvements were judged by the atomic force microscopy (AFM) images, water and gas flux tests and pH‐correlation curves. The introduction of SWCNT was the most important innovation in this research and is promising in future applications.

  19. Characterization of crosslinked polystyrene(PS) beads in SBR matrix

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Yoon-Jong; Choe, Soonja [Inha Univ. (Korea, Republic of)

    1995-12-01

    Monodisperse sized crosslinked polystyrene(PS) beads were prepared by a reaction of semibatch emulsion polymerization with styrene monomer, divinylbenzene(DVB) crosslinking agent and potassium persulfate(K{sub 2}S{sub 2}O{sub 9}) initiator in the absence of emulsifier. The glass transition temperature(T{sub g}) and the mean diameter of the beads were increased from 100{degrees}C to 135{degrees}C and from 402 nm to 532 nm, respectively, for an incorporation of 2 to 10 mol% DVB. Crosslinking density was also linearly increased with DVB content. SEM microphotographs of SBR composite filled with various contents of PS beads revealed that PS beads are relatively well dispersed without changing the spherical shape of the beads in all range of compositions. In stress-strain analysis, elongation at break and tensile strength of SBR composite were increased with the bead content. Applicability of the PS beads as a filler in SBR matrix is tested by plotting Mooney-Rivlin or Guth-Smallwood equations. However, mechanical properties of the composite with the beads were not so excellent as those of the composite with carbon black. Crosslinked PS beads are still tentative as a white color reinforcing filler on SBR matrix.

  20. The PS complex produces the nominal LHC beam

    CERN Document Server

    Benedikt, Michael; Borburgh, J; Cappi, R; Chanel, M; Chohan, V; Cyvoct, G; Garoby, R; Grier, D G; Gruber, J; Hancock, S; Hill, C E; Jensen, E; Krusche, A; Lindroos, M; Métral, Elias; Métral, G; Metzmacher, K D; Olsfors, J; Pedersen, F; Raich, U; Riunaud, J P; Royer, J P; Sassowsky, M; Schindl, Karlheinz; Schönauer, Horst Otto; Thivent, M; Ullrich, H M; Völker, F V; Vretenar, Maurizio; Barnes, M; Blackmore, E W; Cifarelli, F; Clark, G; Jones, F; Koscielniak, Shane Rupert; Mammarella, F; Mitra, A; Poirier, R; Reiniger, K W; Ries, T C

    2000-01-01

    The LHC [1] will be supplied, via the SPS, with protons from the pre-injector chain comprising Linac2, PS Booster (PSB) and PS. These accelerators have under-gone a major upgrading programme [2] during the last five years so as to meet the stringent requirements of the LHC. These imply that many high-intensity bunches of small emittance and tight spacing (25 ns) be available at the PS extraction energy (25 GeV). The upgrading project involved an increase of Linac2 current, new RF systems in the PSB and the PS, raising the PSB energy from 1 to 1.4 GeV, two-batch filling of the PS and the installation of high-resolution beam profile measurement devices. With the project entering its final phase and most of the newly installed hardware now being operational, the emphasis switches to producing the nominal LHC beam and tackling the associated beam physics problems. While a beam with transverse characteristics better than nominal has been obtained, the longitudinal density still needs to be increased. An alternativ...

  1. Pressure Monitoring Using Hybrid fs/ps Rotational CARS

    Science.gov (United States)

    Kearney, Sean P.; Danehy, Paul M.

    2015-01-01

    We investigate the feasibility of gas-phase pressure measurements at kHz-rates using fs/ps rotational CARS. Femtosecond pump and Stokes pulses impulsively prepare a rotational Raman coherence, which is then probed by a high-energy 6-ps pulse introduced at a time delay from the Raman preparation. Rotational CARS spectra were recorded in N2 contained in a room-temperature gas cell for pressures from 0.1 to 3 atm and probe delays ranging from 10-330 ps. Using published self-broadened collisional linewidth data for N2, both the spectrally integrated coherence decay rate and the spectrally resolved decay were investigated as means for detecting pressure. Shot-averaged and single-laser-shot spectra were interrogated for pressure and the accuracy and precision as a function of probe delay and cell pressure are discussed. Single-shot measurement accuracies were within 0.1 to 6.5% when compared to a transducer values, while the precision was generally between 1% and 6% of measured pressure for probe delays of 200 ps or more, and better than 2% as the delay approached 300 ps. A byproduct of the pressure measurement is an independent but simultaneous measurement of the gas temperature.

  2. Final Results on the CERN PS Electrostatic Septa Consolidation Program

    CERN Document Server

    Borburgh, Jan; Bobbio, Piero; Carlier, Etienne; Hourican, Michael; Masson, Thierry; Müller, Tania; Prost, Antoine; Crescenti, Massimo

    2003-01-01

    The CERN PS electrostatic septum consolidation program is coming to completion after almost 4 years of development. The program was started to fulfil the increased requirements on vacuum performance and the need to reduce the time necessary for maintenance interventions. The new design of septum 31, used for the so-called 'continuous transfer' 5-turn extraction, and the related construction issues will be presented together with the operational experience gained during the PS 2002 run. In addition, the experience of two years of operation with the new generation septum 23, used for a resonant slow extraction, will be briefly discussed. The continued development undertaken since its installation in the PS ring in 2001 will also be described.

  3. A&T Sector Note on the PS transverse feedback

    CERN Document Server

    Coly, Marcel; Blas, Alfred; Sterbini, Guido; CERN. Geneva. ATS Department

    2017-01-01

    In a particle accelerator, several contributions can degrade the beam quality and particularly the beam transverse emittance. In this document we will describe a system used in the CERN Proton Synchrotron (PS) to cope with the injection steering errors and the transverse instabilities: the PS transverse feedback (PS TFB). As time progresses, this system is also being used for other purpose, to increase in a controlled way the beam transverse emittance and to excite the beam for the Multi-Turn-Extraction (MTE). In 2016, it has been successfully used on some operational beams to damp injection oscillations. This allowed to test the reliability of the system for its operational deployment. A piquet service is available in case of problem.

  4. SAFETY: STRICTER CONTROLS IN CONTROLLED AREAS IN THE PS

    CERN Document Server

    G. Daems

    2001-01-01

    The PS accelerators will soon stop for several months. Work will take place in controlled areas in the PS and will involve many people who are not always aware of the risks associated with the work sites. To guarentee the safety of these workers, the following two measures will be applied: everyone working in a controlled zone - Linacs, PSB, and PS machines tunnels, and transfer lines - must wear, visibly, his CERN access card and his film badge. the CERN access card and the film badge will only be issued after following a basic safety course. Regular checks will be carried out during the shutdown. Anyone without these two items on their person will be obliged to leave the area immediately.

  5. Electrophysical properties of PMN-PT-PS-PFN:Li ceramics

    Directory of Open Access Journals (Sweden)

    R. Skulski

    2013-01-01

    Full Text Available We present the technology of obtaining and the electrophysical properties of a multicomponent material 0.61PMN-0.20PT-0.09PS-0.1PFN:Li (PMN-PT-PS-PFN:Li. The addition of PFN into PMN-PT decreases the temperature of final sintering which is very important during technological process (addition of Li decreases electric conductivity of PFN. Addition of PS i.e., PbSnO3 (which is unstable in ceramic form permits to shift the temperature of the maximum of dielectric permittivity. One-step method of obtaining ceramic samples from oxides and carbonates has been used. XRD, microstructure, scanning calorimetry measurements and the main dielectric, ferroelectric and electromechanical properties have been investigated for the obtained samples.

  6. Effect of interfaces on the melting of PEO confined in triblock PS-b-PEO-b-PS copolymers.

    Science.gov (United States)

    Beaudoin, E; Phan, T N T; Robinet, M; Denoyel, R; Davidson, P; Bertin, D; Bouchet, R

    2013-08-27

    Block copolymers form nanostructures that have interesting physical properties because they combine, for a single compound, the complementary features brought by each block. However, in order to fully exploit these properties, the physical state of each kind of domain must be precisely controlled. In this work, triblock PS-b-PEO-b-PS copolymers consisting of a central poly(ethylene oxide) (PEO) block covalently bonded to polystyrene (PS) blocks were synthesized by Atom Transfer Radical Polymerization. Their morphology was investigated by X-ray scattering and TEM experiments whereas their thermodynamic behavior was characterized by DSC. A strong decrease of both the melting temperature and the degree of crystallinity of PEO, due to its confinement between the PS domains, was observed and analyzed with a modified Gibbs-Thomson equation, following the approaches used for fluids confined in porous media. The existence of an amorphous bound layer, a few nanometers thick, at the PEO/PS interface, that does not undergo any phase transition in the temperature range investigated, accounts for both the melting temperature depression and the decrease of crystallinity upon confinement. This interfacial layer may significantly affect the mechanical and transport properties of these block copolymers that find applications as solid polymer electrolytes in batteries for example. Moreover, the value obtained for the solid PEO/liquid PEO surface tension is lower than those previously published but is thermodynamically consistent with the surface tensions of polymers at the solid/vapor and liquid/vapor interfaces.

  7. Inauguration of POPS: the new power system of the PS

    CERN Multimedia

    Maximilien Brice

    2010-01-01

    Pictures 03 and 04 : The team from the Electrical Power Converters Group (TE/EPC) is joined by the Director of Accelerators, the heads of the BE, TE and FI departments, CERN managers and Converteam representatives in a group portrait in front of three of the containers that house the capacitor banks of the PS's new power supply system, POPS. Pictures 01, 06 and 07 : Magid-Michel Saikaly, energy and infrastructure director at Converteam, receives a prize from Steve Myers, Director of Accelerators at CERN, for the development and fabrication of the new electrical power system for the PS, called POPS.

  8. The Septa for LEIR Extraction and PS Injection

    CERN Document Server

    Borburgh, J; Masson, T; Prost, A

    2006-01-01

    The Low Energy Ion Ring (LEIR) is part of the CERN LHC injector chain for ions. The LEIR extraction uses a pulsed magnetic septum, clamped around a metallic vacuum chamber. Apart from separating the ultra high vacuum in the LEIR ring from the less good vacuum in the transfer line to the PS this chamber also serves as magnetic screen and retains the septum conductor in place. The PS ion injection septum consists of a pulsed laminated magnet under vacuum, featuring a single-turn water cooled coil and a remote positioning system. The design, the construction and the commissioning of both septa are described.

  9. The OMERACT psoriatic arthritis magnetic resonance imaging scoring system (PsAMRIS): definitions of key pathologies, suggested MRI sequences, and preliminary scoring system for PsA Hands

    DEFF Research Database (Denmark)

    Østergaard, Mikkel; McQueen, Fiona; Wiell, Charlotte

    2009-01-01

    This article describes a preliminary OMERACT psoriatic arthritis magnetic resonance image scoring system (PsAMRIS) for evaluation of inflammatory and destructive changes in PsA hands, which was developed by the international OMERACT MRI in inflammatory arthritis group. MRI definitions of important...... pathologies in peripheral PsA and suggestions concerning appropriate MRI sequences for use in PsA hands are also provided....

  10. Magnetic Field Alignment of PS-P4VP: a Non-Liquid Crystalline Coil-Coil Block Copolymer

    Science.gov (United States)

    Rokhlenko, Yekaterina; Zhang, Kai; Larson, Steven; Gopalan, Padma; O'Hern, Corey; Osuji, Chinedum

    2015-03-01

    Magnetic fields provide the ability to control alignment of self-assembled soft materials such as block copolymers. Most prior work in this area has relied on the presence of ordered assemblies of anisotropic liquid crystalline species to ensure sufficient magnetic anisotropy to drive alignment. Recent experiments with poly(styrene-b-4-vinylpyridine), a non-liquid crystalline BCP, however, show field-induced alignment of a lamellar microstructure during cooling across the order-disorder transition. Using in situ x-ray scattering, we examine the roles of field strength and cooling rate on the alignment response of this low MW coil-coil BCP. Alignment is first observed at field strengths as low as 1 Tesla and improves markedly with both increasing field strength and slower cooling. We present a geometric argument to illustrate the origin of a finite, non-trivial magnetic susceptibility anisotropy for highly stretched surface-tethered polymer chains and corroborate this using coarse-grained molecular dynamics simulations. We rationalize the magnetic field response of the system in terms of the mobility afforded by the absence of entanglements, the intrinsic anisotropy resulting from the stretched polymer chains and sterically constrained conjugated rings, and the large grain size in these low molecular weight materials.

  11. Optimization of protease production by an actinomycete Strain, PS ...

    African Journals Online (AJOL)

    Actinomycetes were isolated from the sediment samples of an estuarine shrimp pond located along the south east coast of India. During the investigation, a total of 28 strains of actinomycetes were isolated and examined for their protease activity. Among them, one strain PS-18A which was tentatively identified as ...

  12. Seismic receiver function interpretation: Ps splitting or anisotropic underplating?

    Science.gov (United States)

    Liu, Zhen; Park, Jeffrey

    2017-03-01

    Crustal anisotropy is crucial to understanding the evolutionary history of Earth's lithosphere. Shear wave splitting of Moho P-to-S converted phases in receiver functions (RFs) have been often used to study crustal anisotropy. Harmonic variation of Moho Ps phases in delay times are used to infer splitting parameters of averaged anisotropy in the crust. However, crustal anisotropy may distribute at various levels within the crust due to complex deformational processes. Layered anisotropy requires careful investigation of the distribution of anisotropy before interpreting Moho Ps splitting. In this study, we show results from stations ARU in Russia, KIP in the Hawaiian Islands and LSA in Tibetan Plateau, where layered anisotropy is constrained well by intracrust Ps conversions at high frequencies using a harmonic-decomposition technique. Anisotropic velocity models are inferred by forward-modeling decomposed RF waveforms. We suggest that the harmonic variation of Moho Ps phases should always be investigated to check for anisotropic layering using RFs with frequency content above 1 Hz, rather than simply reporting averaged anisotropy of the whole crust.

  13. Optimization of protease production by an actinomycete Strain, PS ...

    African Journals Online (AJOL)

    STORAGESEVER

    Isolation Agar Medium in duplicate Petri plates. To minimize ... on the Petri plates were counted from 5th day onwards, up to 28th .... After the dialysis, the volume was measured and analyzed for proteins and stored in deep freezer. Taxonomic investigation. The genus level identification was made for the strain PS-18A using ...

  14. Framing Retention for Institutional Improvement: A 4 Ps Framework

    Science.gov (United States)

    Kalsbeek, David H.

    2013-01-01

    A 4 Ps framework for student retention strategy is a construct for reframing the retention discussion in a way that enables institutional improvement by challenging some conventional wisdom and prevailing perspectives that have characterized retention strategy for years. It opens new possibilities for action and improvement by suggesting that…

  15. Multipole stack for the 4 rings of the PS Booster

    CERN Multimedia

    CERN PhotoLab

    1976-01-01

    The PS Booster (originally 800 MeV, now 1.4 GeV) saw first beam in 1972, routine operation began in 1973. The strive for ever higher intensities required the addition of multipoles. Manufacture of 8 stacks of multipoles was launched in 1974, for installation in 1976. For details, see 7511120X.

  16. The Swelling Behaviour of Polystyrene (PS)/ Polyvinylacetate (Pvac ...

    African Journals Online (AJOL)

    The effect of the variation of the type of solvent responsible for the differences in the swelling kinetics of Polystyrene (PS) and Polyvinyl acetate (PVAc) blends was studied. The results showed that the nature of solvent control or affects the degree of swelling. Also, 1-V characteristics at temperature range of 323-363K shows ...

  17. Boiling treatment of ABS and PS plastics for flotation separation.

    Science.gov (United States)

    Wang, Chong-qing; Wang, Hui; Wu, Bao-xin; Liu, Qun

    2014-07-01

    A new physical method, namely boiling treatment, was developed to aid flotation separation of acrylonitrile-butadiene-styrene (ABS) and polystyrene (PS) plastics. Boiling treatment was shown to be effective in producing a hydrophilic surface on ABS plastic. Fourier Transform Infrared analysis was conducted to investigate the mechanism of boiling treatment of ABS. Surface rearrangement of polymer may be responsible for surface change of boiling treated ABS, and the selective influence of boiling treatment on the floatability of boiling treated plastics may be attributed to the difference in the molecular mobility of polymer chains. The effects of flotation time, frother concentration and particle size on flotation behavior of simple plastic were investigated. Based on flotation behavior of simple plastic, flotation separation of boiling treatment ABS and PS with different particle sizes was achieved efficiently. The purity of ABS and PS was up to 99.78% and 95.80%, respectively; the recovery of ABS and PS was up to 95.81% and 99.82%, respectively. Boiling treatment promotes the industrial application of plastics flotation and facilitates plastic recycling. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. psRNATarget: a plant small RNA target analysis server.

    Science.gov (United States)

    Dai, Xinbin; Zhao, Patrick Xuechun

    2011-07-01

    Plant endogenous non-coding short small RNAs (20-24 nt), including microRNAs (miRNAs) and a subset of small interfering RNAs (ta-siRNAs), play important role in gene expression regulatory networks (GRNs). For example, many transcription factors and development-related genes have been reported as targets of these regulatory small RNAs. Although a number of miRNA target prediction algorithms and programs have been developed, most of them were designed for animal miRNAs which are significantly different from plant miRNAs in the target recognition process. These differences demand the development of separate plant miRNA (and ta-siRNA) target analysis tool(s). We present psRNATarget, a plant small RNA target analysis server, which features two important analysis functions: (i) reverse complementary matching between small RNA and target transcript using a proven scoring schema, and (ii) target-site accessibility evaluation by calculating unpaired energy (UPE) required to 'open' secondary structure around small RNA's target site on mRNA. The psRNATarget incorporates recent discoveries in plant miRNA target recognition, e.g. it distinguishes translational and post-transcriptional inhibition, and it reports the number of small RNA/target site pairs that may affect small RNA binding activity to target transcript. The psRNATarget server is designed for high-throughput analysis of next-generation data with an efficient distributed computing back-end pipeline that runs on a Linux cluster. The server front-end integrates three simplified user-friendly interfaces to accept user-submitted or preloaded small RNAs and transcript sequences; and outputs a comprehensive list of small RNA/target pairs along with the online tools for batch downloading, key word searching and results sorting. The psRNATarget server is freely available at http://plantgrn.noble.org/psRNATarget/.

  19. The role of a conserved membrane proximal cysteine in altering αPS2CβPS integrin diffusion

    Science.gov (United States)

    Syed, Aleem; Arora, Neha; Bunch, Thomas A.; Smith, Emily A.

    2016-12-01

    Cysteine residues (Cys) in the membrane proximal region are common post-translational modification (PTM) sites in transmembrane proteins. Herein, the effects of a highly conserved membrane proximal α-subunit Cys1368 on the diffusion properties of αPS2CβPS integrins are reported. Sequence alignment shows that this cysteine is palmitoylated in human α3 and α6 integrin subunits. Replacing Cys1368 in wild-type integrins with valine (Val1368) putatively blocks a PTM site and alters integrins’ ligand binding and diffusion characteristics. Both fluorescence recovery after photobleaching (FRAP) and single particle tracking (SPT) diffusion measurements show Val1368 integrins are more mobile compared to wild-type integrins. Approximately 33% and 8% more Val1368 integrins are mobile as measured by FRAP and SPT, respectively. The mobile Val1368 integrins also exhibit less time-dependent diffusion, as measured by FRAP. Tandem mass spectrometry data suggest that Cys1368 contains a redox or palmitoylation PTM in αPS2CβPS integrins. This membrane proximal Cys may play an important role in the diffusion of other alpha subunits that contain this conserved residue.

  20. [Retinal Cell Therapy Using iPS Cells].

    Science.gov (United States)

    Takahashi, Masayo

    2016-03-01

    Progress in basic research, starting with the work on neural stem cells in the middle 1990's to embryonic stem (ES) cells and induced pluripotent stem (iPS) cells at present, will lead the cell therapy (regenerative medicine) of various organs, including the central nervous system to a big medical field in the future. The author's group transplanted iPS cell-derived retinal pigment epithelial (RPE) cell sheets to the eye of a patient with exudative age-related macular degeneration (AMD) in 2014 as a clinical research. Replacement of the RPE with the patient's own iPS cell-derived young healthy cell sheet will be one new radical treatment of AMD that is caused by cellular senescence of RPE cells. Since it was the first clinical study using iPS cell-derived cells, the primary endpoint was safety judged by the outcome one year after surgery. The safety of the cell sheet has been confirmed by repeated tumorigenisity tests using immunodeficient mice, as well as purity of the cells, karyotype and genetic analysis. It is, however, also necessary to prove the safety by clinical studies. Following this start, a good strategy considering cost and benefit is needed to make regenerative medicine a standard treatment in the future. Scientifically, the best choice is the autologous RPE cell sheet, but autologous cell are expensive and sheet transplantation involves a risky part of surgical procedure. We should consider human leukocyte antigen (HLA) matched allogeneic transplantation using the HLA 6 loci homozyous iPS cell stock that Prof. Yamanaka of Kyoto University is working on. As the required forms of donor cells will be different depending on types and stages of the target diseases, regenerative medicine will be accomplished in a totally different manner from the present small molecule drugs. Proof of concept (POC) of photoreceptor transplantation in mouse is close to being accomplished using iPS cell-derived photoreceptor cells. The shortest possible course for treatment

  1. A transmissão psíquica geracional

    Directory of Open Access Journals (Sweden)

    Vinícius Oliveira dos Santos

    Full Text Available O artigo seguinte refere-se a um estudo sobre como ocorre a transmissão psíquica entre as gerações e qual sua importância na constituição psíquica do sujeito. É também objetivo deste artigo explicar o que são as transmissões intergeracional e transgeracional. Para buscar respostas para essas questões, fez-se uma pesquisa bibliográfica sobre a transmissão psíquica, pelo viés psicanalítico, principalmente a partir da teoria lacaniana e com conceitos oriundos da linguística saussuriana. Será a partir de uma determinada ordem simbólica, constituída pela linguagem que precede o sujeito, nomeado por Lacan como o Outro, que a transmissão psíquica entre gerações ganhará o seu caráter unívoco, sempre se tendo em mente a importância fundamental do recalcamento e de seus efeitos, bem como do retorno do recalcado nas diferentes gerações. A transmissão psíquica é necessária e concomitante à constituição do sujeito, e ocorre através da linguagem, dos significantes que irão determinar uma ordem simbólica para o ser que nasce através dos diferentes discursos que perpassam as gerações nas figuras dos pais desse novo ser. Essa ordem simbólica continuará a se fazer presente nesse novo sujeito pelo restante de sua existência. Este artigo busca dar nova luz ao aspecto da transmissão psíquica transgeracional, diferenciando-se da recalque s abordagens psicanalíticas contemporâneas por ser uma leitura lacaniana. Serão usados dois exemplos: um de como a transmissão aparece na cultura, outro, na subjetividade do sujeito através da arte.

  2. Assessment of Sub-Micron Particles by Exploiting Charge Differences with Dielectrophoresis

    Directory of Open Access Journals (Sweden)

    Maria F. Romero-Creel

    2017-08-01

    Full Text Available The analysis, separation, and enrichment of submicron particles are critical steps in many applications, ranging from bio-sensing to disease diagnostics. Microfluidic electrokinetic techniques, such as dielectrophoresis (DEP have proved to be excellent platforms for assessment of submicron particles. DEP is the motion of polarizable particles under the presence of a non-uniform electric field. In this work, the polarization and dielectrophoretic behavior of polystyrene particles with diameters ranging for 100 nm to 1 μm were studied employing microchannels for insulator based DEP (iDEP and low frequency (<1000 Hz AC and DC electric potentials. In particular, the effects of particle surface charge, in terms of magnitude and type of functionalization, were examined. It was found that the magnitude of particle surface charge has a significant impact on the polarization and dielectrophoretic response of the particles, allowing for successful particle assessment. Traditionally, charge differences are exploited employing electrophoretic techniques and particle separation is achieved by differential migration. The present study demonstrates that differences in the particle’s surface charge can also be exploited by means of iDEP; and that distinct types of nanoparticles can be identified by their polarization and dielectrophoretic behavior. These findings open the possibility for iDEP to be employed as a technique for the analysis of submicron biological particles, where subtle differences in surface charge could allow for rapid particle identification and separation.

  3. A solvent-shrinkage method for producing polymeric microsieves with sub-micron size pores

    NARCIS (Netherlands)

    Vriezekolk, Erik; Kemperman, Antonius J.B.; Girones nogue, Miriam; de Vos, Wiebe Matthijs; Nijmeijer, Dorothea C.

    2013-01-01

    This paper presents a thorough investigation of a simple method to decrease the dimensions of polymeric microsieves. Pore sizes of microsieves are usually in the micrometer scale, but need to be reduced to below 1 µm to make the microsieves attractive for aqueous filtration applications. In this

  4. Simulation of monolithic active pixels in deep sub-micron technologies

    CERN Document Server

    Manolopoulos, S; Turchetta, R

    2002-01-01

    The use of monolithic active pixels (MAPS) has quickly spread in a number of scientific fields ranging from imaging to high-energy particle physics applications. The success of MAPS is due to a number of reasons, for example their low power consumption, fast readout, high spatial resolution and low cost. The latter reflects the use of standard CMOS processes for fabrication. In this paper, the performance of MAPS designed in 0.25 mu m technology will be modelled by means of TCAD device simulation software. The dependence of the device performance on parameters that affect the detection of minimum ionising particles (MIP) will be studied aiming at the optimisation of the detector performance. More specifically, the simulations will focus on the influence of the epitaxial layer thickness on the amount of collected charge, that defines the signal and the cluster size, that affects the spatial resolution.

  5. Preparation of chitosan-TPP sub-micron particles: Critical evaluation and derived recommendations.

    Science.gov (United States)

    Rázga, Filip; Vnuková, Dominika; Némethová, Veronika; Mazancová, Petra; Lacík, Igor

    2016-10-20

    The controlled preparation of chitosan particles is far from being trivial due to a considerable number of experimental parameters. For chitosan-tripolyphosphate (TPP) particles we evaluate the impact of chemical (type of chitosan, concentration, chitosan to TPP ratio, pH, ionic strength) and process factors (dialysis, stirring rate, rate of TPP addition, temperature, needle diameter) on the size and colloidal stability. The particles were prepared at pH=6.0 at which chitosan adopts the coiled conformation that is discussed as the dominant factor in controlling the stoichiometry of crosslinking reaction shifted towards TPP. These conditions result in identical particle size around 400nm and zeta potential around 22mV. The colloidal stability evaluated 24 hours after preparation depends on the amount of TPP during crosslinking. Under the same conditions, the colloidal stability up to 1 month is demonstrated. Several recommendations are provided to increase the control over formation of chitosan-TPP particles. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Trapping ultracold atoms in a sub-micron-period triangular magnetic lattice

    Science.gov (United States)

    Wang, Y.; Tran, T.; Surendran, P.; Herrera, I.; Balcytis, A.; Nissen, D.; Albrecht, M.; Sidorov, A.; Hannaford, P.

    2017-07-01

    We report the trapping of ultracold 87Rb atoms in a 0.7-μ m-period two-dimensional triangular magnetic lattice on an atom chip. The magnetic lattice is created by a lithographically patterned magnetic Co/Pd multilayer film plus bias fields. Rubidium atoms in the |F =1 , mF=-1 > low-field seeking state are trapped at estimated distances down to about 100 nm from the chip surface and with calculated mean trapping frequencies up to about 800 kHz . The measured lifetimes of the atoms trapped in the magnetic lattice are in the range 0.4-1.7 ms , depending on distance from the chip surface. Model calculations suggest the trap lifetimes are currently limited mainly by losses due to one-dimensional thermal evaporation following loading of the atoms from the Z -wire trap into the very tight magnetic lattice traps, rather than by fundamental loss processes such as surface interactions, three-body recombination, or spin flips due to Johnson magnetic noise. The trapping of atoms in a 0.7 -μ m -period magnetic lattice represents a significant step toward using magnetic lattices for quantum tunneling experiments and to simulate condensed matter and many-body phenomena in nontrivial lattice geometries.

  7. Induced magnetoresistance in semiconductor devices due to single sub-micron magnetic barriers

    Science.gov (United States)

    Kubrak, V.; Rahman, F.; Overend, N.; Gallagher, B. L.; Main, P. C.; Boeck, J. de; Behest, M.; Marrows, C. H.; Howson, M. A.

    1998-12-01

    We investigate the magnetoresistance induced in a near-surface two-dimensional electron gas by the fringe field of a thin ferromagnetic line on the surface of the device. From the measured magnetoresistance, we deduce the hysteretic properties of the magnetic line, using the semiconductor device as a nanomagnetometer.

  8. Multidisciplinary Approach to the Science and Technology of Sub-Micron Electronics.

    Science.gov (United States)

    1987-03-10

    overlap with the continuum are unique to the quantum well structures. A paper describing our findings has been submitted for publication. Regarding...Grant ARO DAAG 29-83-K-0131 during the period 7/1/85-12/31/85 1. " Fibonacci GaAs-AlAs Superlattices", R. Clarke, R. Merlin, K. Bajema, F.-Y Juang and P.K...pursued: experiments on new quasiperiodic superlattices and studies of quantum-well structures. In the quasiperiodic ( Fibonacci ) superlattices we have

  9. High Proportions of Sub-micron Particulate Matter in Icelandic Dust Storms in 2015

    Science.gov (United States)

    Dagsson Waldhauserova, Pavla; Arnalds, Olafur; Olafsson, Haraldur; Magnusdottir, Agnes

    2017-04-01

    Iceland is extremely active dust region and desert areas of over 44,000 km2 acknowledge Iceland as the largest Arctic and European desert. Frequent dust events, up to 135 dust days annually, transport dust particles far distances towards the Arctic and Europe. Satellite MODIS pictures have revealed dust plumes exceeding 1,000 km. The annual dust deposition was calculated as 40.1 million tons yr-1. Two dust storms were measured in transverse horizontal profile about 90 km far from different dust sources in southwestern Iceland in the summer of 2015. Aerosol monitor DustTrak DRX 8533EP was used to measure PM mass concentrations corresponding to PM1, PM2.5, PM4, PM10 and the total PM15 at several places within the dust plume. Images from camera network operated by the Icelandic Road and Coastal Administration were used to estimate the visibility and spatial extent of measured dust events. A numerical simulation of surface winds was carried out with the numerical model HIRLAM with horizontal resolution of 5 km and used to calculate the total dust flux from the sources. The in situ measurements inside the dust plumes showed that aeolian dust can be very fine. The study highlights that suspended volcanic dust in Iceland causes air pollution with extremely high PM1 concentrations comparable to the polluted urban stations in Europe or Asia rather than reported dust event observations from around the world. The PM1/PM2.5 ratios are generally low during dust storms outside of Iceland, much lower than > 0.9 and PM1/PM10 ratios of 0.34-0.63 found in our study. It shows that Icelandic volcanic dust consists of higher proportion of submicron particles compared to crustal dust. The submicron particles are predicted to travel long distances. Moreover, such submicron particles pose considerable health risk because of high potential for entering the lungs. Icelandic volcanic glass has often fine pipe-vesicular structures known from asbestos and high content of heavy metals. Previous in situ measurements at the dust source in 2013 revealed extremely high number concentrations of submicron particles, specifically in the size range 0.3-0.337 μm. The PM2.5/PM10 ratios of mass concentrations seem to be lower at the dust sources that in some distance from the sources as measured in 2015. Common dust storms in Iceland are of several hundred thousand tons of magnitude from relatively well defined main dust sources. Numerical simulations were used calculate the total dust flux from the sources as 180,000 - 280,000 tons in this study. The mean PM1 (PM10) concentrations inside of the dust plumes varied from 97 to 241 µg m-3 (PM10 = 158 to 583 µg m-3). The extent of moderate dust events was calculated as 2.450 km2 to 4.220 km2 of the land area suggesting the regional scale of the events. Dust plumes reported here passed the most densely inhabited areas of Iceland, health risk warnings for the general public were, however, not issued. The data provided stresses the need for such warning system and is an important step towards its development.

  10. Simulation of hurricane response to suppression of warm rain by sub-micron aerosols

    Directory of Open Access Journals (Sweden)

    D. Rosenfeld

    2007-07-01

    Full Text Available The feasibility of hurricane modification was investigated for hurricane Katrina using the Weather Research and Forecasting Model (WRF. The possible impact of seeding of clouds with submicron cloud condensation nuclei (CCN on hurricane structure and intensity as measured by nearly halving of the area covered by hurricane force winds was simulated by "turning–off" warm rain formation in the clouds at Katrina's periphery (where wind speeds were less than 22 m s−1. This simplification of the simulation of aerosol effects is aimed at evaluating the largest possible response. This resulted in the weakening of the hurricane surface winds compared to the "non-seeded" simulated storm during the first 24 h within the entire tropical cyclone (TC area compared to a control simulation without warm rain suppression. Later, the seeding-induced evaporative cooling at the TC periphery led to a shrinking of the eye and hence to some increase in the wind within the small central area of the TC. Yet, the overall strength of the hurricane, as defined by the area covered by hurricane force winds, decreased in response to the suppressed warm rain at the periphery, as measured by a 25% reduction in the radius of hurricane force winds. In a simulation with warm rain suppression throughout the hurricane, the radius of the hurricane force winds was reduced by more than 42%, and although the diameter of the eye shrunk even further the maximum winds weakened. This shows that the main mechanism by which suppressing warm rain weakens the TC is the low level evaporative cooling of the un-precipitated cloud drops and the added cooling due to melting of precipitation that falls from above.

  11. Sub-micron-sized delafossite CuCrO2 with different morphologies ...

    Indian Academy of Sciences (India)

    Currently, copper chromium oxide crystallizing in delafossite structure attracts huge research interest due to its versatile applications arising from its layered structure. In this work, delafossite CuCrO 2 was synthesized by sol–gel method from their respective hydrated nitrate salts with citric acid as a chelating agent.

  12. Penetration of sub-micron aerosol droplets in composite cylindrical filtration elements

    NARCIS (Netherlands)

    Geurts, Bernardus J.; Pratte, Pascal; Stolz, S.; Stabbert, Regina; Poux, Valerie; Nordlund, Markus; Winkelmann, Christoph

    Advection–diffusion transport of aerosol droplets in composite cylindrical filtration elements is analyzed and compared to experimental data. The penetration, characterizing the fraction of droplets that passes through the pores of a filtration element, is quantified for a range of flow rates. The

  13. Deviation from threshold model in ultrafast laser ablation of graphene at sub-micron scale

    Energy Technology Data Exchange (ETDEWEB)

    Gil-Villalba, A.; Xie, C.; Salut, R.; Furfaro, L.; Giust, R.; Jacquot, M.; Lacourt, P. A.; Dudley, J. M.; Courvoisier, F., E-mail: francois.courvoisier@femto-st.fr [Institut FEMTO-ST, UMR 6174 CNRS, Universite de Bourgogne Franche-Comte, 25030 Besançon Cedex (France)

    2015-08-10

    We investigate a method to measure ultrafast laser ablation threshold with respect to spot size. We use structured complex beams to generate a pattern of craters in CVD graphene with a single laser pulse. A direct comparison between beam profile and SEM characterization allows us to determine the dependence of ablation probability on spot-size, for crater diameters ranging between 700 nm and 2.5 μm. We report a drastic decrease of ablation probability when the crater diameter is below 1 μm which we interpret in terms of free-carrier diffusion.

  14. Preparation and characterization of sub-micron dispersions of sand in ethylene glycol-water mixture

    OpenAIRE

    Manikandan,S.; Karthikeyan, N.; M Silambarasan; K. S. Suganthi; Rajan, K. S.

    2012-01-01

    Experiments were carried out on the preparation and characterization of dispersions of sand in ethylene glycol-water (50-50%) mixture. The dispersions were prepared by stirred bead milling of 20-30 µm sand (in water) followed by dilution with water and ethylene glycol. The influence of temperature (31-45 ºC), particle concentration (< 2 vol %) and ultrasonication on the viscosity of sand-ethylene glycol-water dispersions was studied. The thermal conductivity of dispersions as a function of pa...

  15. White light generation using photonic crystal fiber with sub-micron circular lattice

    Science.gov (United States)

    Saghaei, Hamed; Ghanbari, Ashkan

    2017-08-01

    In this paper, we study a photonic crystal fiber (PCF) with circular lattice and engineer linear and nonlinear parameters by varying the diameter of air-holes. It helps us obtain low and high zero dispersion wavelengths in the visible and nearinfrared regions. We numerically demonstrate that by launching 100 fs input pulses of 1, 2, and 5 kW peak powers with center wavelength of 532 nm from an unamplified Ti:sapphire laser into a 100 mm length of the engineered PCF, supercontinua as wide as 290, 440 and 830 nm can be obtained, respectively. The spectral broadening is due to the combined action of self-phase modulation, stimulated Raman scattering and parametric four-wave-mixing generation of the pump pulses. The third and the widest spectrum covers the entire visible range and a part of near infrared region making it a suitable source for both white light applications and optical coherence tomography to measure retinal oxygen metabolic response to systemic oxygenation.

  16. Laser forming for sub-micron adjustment: with application to optical fiber assembly

    NARCIS (Netherlands)

    Folkersma, Ger

    2015-01-01

    Laser forming is a method to deform a material by controlled local laser heating. In combination with a dedicated actuator topology, those deformations can be used for high precision alignment of components. This thesis applies this method to the alignment of optical fibers with respect to the

  17. OpenStage: a low-cost motorized microscope stage with sub-micron positioning accuracy.

    Directory of Open Access Journals (Sweden)

    Robert A A Campbell

    Full Text Available Recent progress in intracellular calcium sensors and other fluorophores has promoted the widespread adoption of functional optical imaging in the life sciences. Home-built multiphoton microscopes are easy to build, highly customizable, and cost effective. For many imaging applications a 3-axis motorized stage is critical, but commercially available motorization hardware (motorized translators, controller boxes, etc are often very expensive. Furthermore, the firmware on commercial motor controllers cannot easily be altered and is not usually designed with a microscope stage in mind. Here we describe an open-source motorization solution that is simple to construct, yet far cheaper and more customizable than commercial offerings. The cost of the controller and motorization hardware are under $1000. Hardware costs are kept low by replacing linear actuators with high quality stepper motors. Electronics are assembled from commonly available hobby components, which are easy to work with. Here we describe assembly of the system and quantify the positioning accuracy of all three axes. We obtain positioning repeatability of the order of 1 μm in X/Y and 0.1 μm in Z. A hand-held control-pad allows the user to direct stage motion precisely over a wide range of speeds (10(-1 to 10(2 μm·s(-1, rapidly store and return to different locations, and execute "jumps" of a fixed size. In addition, the system can be controlled from a PC serial port. Our "OpenStage" controller is sufficiently flexible that it could be used to drive other devices, such as micro-manipulators, with minimal modifications.

  18. OpenStage: a low-cost motorized microscope stage with sub-micron positioning accuracy.

    Science.gov (United States)

    Campbell, Robert A A; Eifert, Robert W; Turner, Glenn C

    2014-01-01

    Recent progress in intracellular calcium sensors and other fluorophores has promoted the widespread adoption of functional optical imaging in the life sciences. Home-built multiphoton microscopes are easy to build, highly customizable, and cost effective. For many imaging applications a 3-axis motorized stage is critical, but commercially available motorization hardware (motorized translators, controller boxes, etc) are often very expensive. Furthermore, the firmware on commercial motor controllers cannot easily be altered and is not usually designed with a microscope stage in mind. Here we describe an open-source motorization solution that is simple to construct, yet far cheaper and more customizable than commercial offerings. The cost of the controller and motorization hardware are under $1000. Hardware costs are kept low by replacing linear actuators with high quality stepper motors. Electronics are assembled from commonly available hobby components, which are easy to work with. Here we describe assembly of the system and quantify the positioning accuracy of all three axes. We obtain positioning repeatability of the order of 1 μm in X/Y and 0.1 μm in Z. A hand-held control-pad allows the user to direct stage motion precisely over a wide range of speeds (10(-1) to 10(2) μm·s(-1)), rapidly store and return to different locations, and execute "jumps" of a fixed size. In addition, the system can be controlled from a PC serial port. Our "OpenStage" controller is sufficiently flexible that it could be used to drive other devices, such as micro-manipulators, with minimal modifications.

  19. Bragg diffraction from sub-micron particles isolated by optical tweezers

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Yuan, E-mail: ygao0709@anl.gov; Harder, Ross; Southworth, Stephen; Guest, Jeffrey; Ocola, Leonidas; Young, Linda [Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439 (United States); Scherer, Norbert; Yan, Zijie [Department of Chemistry, University of Chicago, Chicago, IL 60637 (United States); Pelton, Matthew [Department of Physics, University of Maryland, Baltimore County, MD 21250 (United States)

    2016-07-27

    We describe an apparatus using dynamic holographic optical tweezers which is capable of trapping and aligning a single micron scale anisotropic ZnO particle for x-ray Bragg diffraction experiments. The optical tweezers demonstrate enough stability to perform coherent x-ray diffraction imaging.

  20. Dynamics of Dissolved Organic Matter and Microbes in Seawater through Sub-Micron Particle Size Analyses

    Digital Repository Service at National Institute of Oceanography (India)

    Goes, J.I.; Balch, W.M.; Vaughn, J.M.; Gomes, H.R.

    processes responsible for the dynamics of DOM rely on monitoring the consumption and breakdown of specific compounds of phytoplankton origin, generally, through the use of labeled precursors and substrates (Kirchman et al., 1991; Fry et al., 1996; Rich et al... attempts to determine the molecular weight or size spectrum of DOM using size exclusion chromatography, but these have generally proven unsatisfactory (Beckett et al., 1987). One reason is that DOM is exposed to high shear stresses during separation...

  1. Analysis and Test Development for Parasitic Fails in Deep Sub-Micron Memory Devices

    NARCIS (Netherlands)

    Irobi, I.S.

    2011-01-01

    Emerging technology trends are gravitating towards extremely high levels of integration at the package and chip levels, and use of deeply scaled technology in nanometer, approaching 10nm CMOS. Challenges will arise due to the ability to design complex systems such as robots that encompass sensors,

  2. Transfer line from the PSB to the PS (recombination)

    CERN Multimedia

    CERN PhotoLab

    1976-01-01

    After sequential ejection of 5 bunches from each of the 4 rings of the Booster (originally 800 MeV, now 1.4 GeV), the 4 batches are brought to the same vertical level, so as to form a string of 20 bunches, filling the circumference of the PS. This vertical "recombination" is performed in the transfer line, using vertical bending magnets, septa and kickers. Here we see the section where the beam from ring 4 (the top one) is brought down to the level of ring 3, and the beam from ring 1 up to the level of ring 2. Further downstream (to the right, outside this picture), level 2 is brought up to level 3, identical to that of the PS. After this original recombination scheme, other ways of combining the 4 beams, vertically and/or longitudinally, were developed and used in operation.

  3. O Trabalho Psíquico da Intersubjetividade

    Directory of Open Access Journals (Sweden)

    Maria Inês Assumpção Fernandes

    2003-01-01

    Full Text Available O presente trabalho procura refletir sobre o trabalho psíquico da intersubjetividade nos grupos. Trata-se de pensá-lo na relação com a ruptura de investimentos durante o processo de Transformação x Criação, em primeiro lugar. A partir desse ponto, discutiremos a relação entre Transformação, Trabalho e Dispositivo. Neste caso pensamos nas possibilidades de intervenção, refletindo sobre a intervenção inpidual e a intervenção grupal. A questão da Transmissão Psíquica entre gerações será focalizada, fundamentalmente, no que se refere aos tempos lógicos do recalque.

  4. Images of Christ's Saving Work in Ps.-Epiphanius' Homilies

    Directory of Open Access Journals (Sweden)

    H. F. Stander

    1997-12-01

    Full Text Available Images of Christ's Saving Work in Ps.-Epiphanius' Homilies. One cannot really speak of a systematic theology on the subject of atone-ment in the patristic writers. Frances Young once said that 'it is in fact impossible to categorize neatly the thought of the major patristic writers on the subject of atonement'. She adds that one cannot do justice to the range of motifs and images that are found in describing the saving and atoning work of Christ if we merely dismember 'systematic theologies' to illustrate common soteriological themes. One can only appreciate patristic views of atonement if one begins by recognizing the multifaceted unity of imagery that pervades the literature. This then is the goal of this article: to discuss the rich images which Ps: -Epiphanius uses to describe the atoning work of Christ.

  5. Magnetoelectric MnPS3 as a candidate for ferrotoroidicity

    Science.gov (United States)

    Ressouche, E.; Loire, M.; Simonet, V.; Ballou, R.; Stunault, A.; Wildes, A.

    2010-09-01

    We have revisited the magnetic structure of manganese phosphorus trisulfide MnPS3 using neutron diffraction and polarimetry. MnPS3 undergoes a transition toward a collinear antiferromagnetic order at 78 K. The resulting magnetic point-group breaks both the time reversal and the space inversion thus allowing a linear magnetoelectric coupling. Neutron polarimetry was subsequently used to prove that this coupling provides a way to manipulate the antiferromagnetic domains simply by cooling the sample under crossed magnetic and electrical fields, in agreement with the nondiagonal form of the magnetoelectric tensor. In addition, this tensor has, in principle, an antisymmetric part that results in a toroidic moment and provides with a pure ferrotoroidic compound.

  6. PS Dreyer: Bakens op die pad van die wetenskap

    Directory of Open Access Journals (Sweden)

    A. J. Antonites

    1986-01-01

    Full Text Available PS Dreyer: Beacons on the path of science Professor PS Dreyer is an academic who has shown insight and vision into several problems of the human sciences since 1951. He has identified problems, but also contributed solutions to them. In this respect his philosophy on causality and freedom is of utmost importance. The same applies to his investigations into the relationship history-Christianity as well as the unity of sciences and how the concepts scientific, unscientic and nonscientific are related to one another. His contribution to the understanding of Greek philosophy should be of significance for time to come. Two milestones could be distinguished: Dreyer's particular solution to the problem of the criterion on truth, viz meaningfulness and his notion of the knowledge of values in ethics by valuation in contradistinction to knowledge through feeling, reason and will.

  7. Images of Christ's Saving Work in Ps.-Epiphanius' Homilies

    Directory of Open Access Journals (Sweden)

    H. F. Stander

    1997-01-01

    Full Text Available Images of Christ's Saving Work in Ps.-Epiphanius' Homilies. One cannot really speak of a systematic theology on the subject of atone-ment in the patristic writers. Frances Young once said that 'it is in fact impossible to categorize neatly the thought of the major patristic writers on the subject of atonement'. She adds that one cannot do justice to the range of motifs and images that are found in describing the saving and atoning work of Christ if we merely dismember 'systematic theologies' to illustrate common soteriological themes. One can only appreciate patristic views of atonement if one begins by recognizing the multifaceted unity of imagery that pervades the literature. This then is the goal of this article: to discuss the rich images which Ps: -Epiphanius uses to describe the atoning work of Christ.

  8. Longitudinal coupled-bunch instability studies in the PS

    CERN Document Server

    Damerau, H

    2017-01-01

    The main longitudinal limitation for LHC-type beams inthe PS are coupled-bunch instabilities. A dedicated proto-typefeedbacksystemusingaFinemetcavityasalongitudinalkicker has been installed. Extensive tests with beam havebeen performed to explore the intensity reach with this feed-back. The maximum intensity with nominal longitudinalemittance at PS extraction has been measured, as well as theemittance required to keep the beam longitudinally stableat the design intensity for the High-Luminosity LHC (HL-LHC). A higher-harmonic cavity is a complementary op-tion to extend the intensity reach beyond the capabilities ofthe coupled-bunch feedback. Preliminary machine develop-ment (MD) studies operating one20MHzor one40MHzRF system as a higher harmonic at the flat-top indicate thebeneficial effect on longitudinal beam stability

  9. Functional characterization of calcineurin homologs PsCNA1/PsCNB1 in Puccinia striiformis f. sp. tritici using a host-induced RNAi system.

    Directory of Open Access Journals (Sweden)

    Hong Zhang

    Full Text Available Calcineurin plays a key role in morphogenesis, pathogenesis and drug resistance in most fungi. However, the function of calcineurin genes in Puccinia striiformis f. sp. tritici (Pst is unclear. We identified and characterized the calcineurin genes PsCNA1 and PsCNB1 in Pst. Phylogenetic analyses indicate that PsCNA1 and PsCNB1 form a calcium/calmodulin regulated protein phosphatase belonging to the calcineurin heterodimers composed of subunits A and B. Quantitative RT-PCR analyses revealed that both PsCNA1 and PsCNB1 expression reached their maximum in the stage of haustorium formation, which is one day after inoculation. Using barely stripe mosaic virus (BSMV as a transient expression vector in wheat, the expression of PsCNA1 and PsCNB1 in Pst was suppressed, leading to slower extension of fungal hyphae and reduced production of urediospores. The immune-suppressive drugs cyclosporin A and FK506 markedly reduced the germination rates of urediospores, and when germination did occur, more than two germtubes were produced. These results suggest that the calcineurin signaling pathway participates in stripe rust morphogenetic differentiation, especially the formation of haustoria during the early stage of infection and during the production of urediospores. Therefore PsCNA1 and PsCNB1 can be considered important pathogenicity genes involved in the wheat-Pst interaction.

  10. Consolidation of the 45-Year Old PS Main Magnet System

    CERN Document Server

    Zickler, Thomas; Kalbreier, Wilhelm; Mess, Karl Hubert; Newborough, Antony

    2006-01-01

    After a major coil insulation breakdown on two of the 47-year-old CERN PS main magnets in 2003, an extensive magnet consolidation program has been launched. This article reviews the analysis of the magnet state be-fore the repair and the applied major improvements. An overview is given of the production of the new compo-nents, the actual refurbishment and the commissioning of the main magnet system after 18 months shutdown.

  11. Specification of the Beam Position Measurement in the PS Machine

    CERN Document Server

    Bravin, Enrico; Chanel, M; Ludwig, M; Métral, Elias; Métral, G; Potier, J P; Raich, U; Scrivens, R; Steerenberg, R; CERN. Geneva. AB Department

    2003-01-01

    This specification, drawn up by the instrumentation specification board 2, describes the requirements concerning orbit and trajectory measurements in the PS machine. The orbit measurement and the trajectory measurement are both indispensable in order to be able to guarantee the correct beam quality for beams like LHC, the future Grand Sasso beam, the nTOF beam and surely the combined operation of the nTOF beam and the East Area beam.

  12. Science spin: iPS cell research in the news.

    Science.gov (United States)

    Caulfield, T; Rachul, C

    2011-05-01

    Big scientific developments have always been spun to meet particular social agendas. We have seen it in the context of global warming, nuclear power, and genetically modified organisms. But few stories illustrate the phenomenon of spin as well as the reaction, and concomitant media coverage, that surrounded the November 2007 announcement regarding the reprogramming of skin cells to produce cells with qualities comparable to those of human embryonic stem cells (hESCs) known as induced pluripotent stem (iPS) cells.

  13. Physics at the AD/PS/SPS (1/4)

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    Lecture 1: The CERN injector complex and beams for non-LHC physics. The various machines and beam lines in the CERN injector complex are presented, from the linacs to the SPS. Special emphasis is given to the beam lines at the PS and SPS machines: AD, North and East Areas, nTOF and CNGS and HiRadMad as well as the ion beams. A short outlook is given to possible future upgrades and projects.

  14. Ps18.pdf | sep2002 | jess | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Home; jess; sep2002; Ps18.pdf. 404! error. The page your are looking for can not be found! Please check the link or use the navigation bar at the top. YouTube; Twitter; Facebook; Blog. Academy News. IAS Logo. Associates – 2017. Posted on 17 July 2017. Click here to see the list · 28th Mid Year Meeting. Posted on 26 May ...

  15. New Electron Cloud Detectors for the PS Main Magnets

    CERN Document Server

    Yin Vallgren, Ch; Gilardoni, S; Taborelli, M; Neupert, H; Ferreira Somoza, J

    2014-01-01

    Electron cloud (EC) has already been observed during normal operation of the PS, therefore it is necessary to study its in fluence on any beam instability for the future LHC Injector Upgrade (LIU). Two new electron cloud detectors have been discussed, developed and installed during the Long Shutdown (LS1) in one of the PS main magnets. The first measurement method is based on current measurement by using a shielded button-type pick-up. Due to the geometry and space limitation in the PS magnet, the button-type pick-up made of a 96%Al2O3 block coated with a thin layer of solvent-based Ag painting, placed 30 degrees to the bottom part of the vacuum chamber was installed in the horizontal direction where the only opening of the magnet coil is. The other newly developed measurement method is based on detection of photons emitted by the electrons from the electron cloud impinging on the vacuum chamber walls. The emitted photons are reected to a quartz window. A MCP-PMT (Micro-Channel Plate Photomultiplier Tube) wit...

  16. LS1 Report: PS Booster prepares for beam

    CERN Multimedia

    Katarina Anthony

    2014-01-01

    With Linac2 already up and running, the countdown to beam in the LHC has begun! The next in line is the PS Booster, which will close up shop to engineers early next week. The injector will be handed over to the Operations Group who are tasked with getting it ready for active duty.   Taken as we approach the end of LS1 activities, this image shows where protons will soon be injected from Linac2 into the four PS Booster rings. Over the coming two months, the Operations Group will be putting the Booster's new elements through their paces. "Because of the wide range of upgrades and repairs carried out in the Booster, we have a very full schedule of tests planned for the machine," says Bettina Mikulec, PS Booster Engineer in Charge. "We will begin with cold checks; these are a wide range of tests carried out without beam, including system tests with power on/off and with varying settings, as well as verification of the controls system and timings." Amon...

  17. Kultuur isiksuse psühholoogiat ei mõjuta / Tiit Kändler

    Index Scriptorium Estoniae

    Kändler, Tiit, 1948-

    2010-01-01

    Psühholoogia uuemate andmete kohaselt ei sõltu indiviidi seadumus kultuurist, soost, vanusest, haridusest. Eesti psühholoogide Jüri Alliku ja Ann Realo osalusel ajakirjas "Journal Personality and Social Psychology" ilmunud artiklist

  18. Kultuur isiksuse psühholoogiat ei mõjuta / Tiit Kändler

    Index Scriptorium Estoniae

    Kändler, Tiit, 1948-

    2005-01-01

    Psühholoogia uuemate andmete kohaselt ei sõltu indiviidi seadumus kultuurist, soost, vanusest, haridusest. Eesti psühholoogide Jüri Alliku ja Anu Realo osalusel ajakirjas "Journal Personality and Social Psychology" ilmunud artiklist

  19. Comparative, validity and responsiveness of the HOOS-PS and KOOS-PS to the WOMAC physical function subscale in total joint replacement for osteoarthritis

    DEFF Research Database (Denmark)

    Davis, A M; Perruccio, A V; Canizares, M

    2009-01-01

    OBJECTIVE: To evaluate the internal consistency of the Hip disability and Osteoarthritis Outcome Score-Physical Function Short-form (HOOS-PS) and the Knee injury and Osteoarthritis Outcome Score-Physical Function Short-form (KOOS-PS) in total hip replacement (THR) and total knee (TKR) replacement....... Construct validity and responsiveness were compared to the Western Ontario McMaster Universities' Osteoarthritis Index (WOMAC) Likert 3.0 physical function (PF) subscale and the PF excluding the items in the short measures (PF-exclusions). METHODS: Participants completed the full HOOS or KOOS, measures...... of fatigue, anxiety, depression and the Chronic Pain Grade (CPG) pre-surgery and the HOOS or KOOS 6 months post-surgery. Internal consistency for the HOOS-PS and KOOS-PS was calculated using Cronbach's alpha. For construct validity, it was hypothesized that correlations between the HOOS-PS or KOOS-PS and PF...

  20. Analüütilised voolud psühholoogias ja nende rakendamine pedagoogikas / Aleksander Elango

    Index Scriptorium Estoniae

    Elango, Aleksander, 1902-2004

    2001-01-01

    Analüütise psühholoogia kolm koolkonda - S.Freudì koolkond e. päris-psühhoanalüüs, A.Adlerì koolkond e. individuaalpsühholoogia ja C.G.Jungì psühhoanalüüsi ja individuaalpsühholoogia sünteesi luua püüdev koolkond. Analüütise psühholoogia koolkondade ja pedagoogika suhetest

  1. File list: His.PSC.05.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.05.AllAg.iPS_cells hg19 Histone Pluripotent stem cell iPS cells SRX317576,S...077,SRX317607 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/His.PSC.05.AllAg.iPS_cells.bed ...

  2. File list: His.PSC.50.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.50.AllAg.iPS_cells mm9 Histone Pluripotent stem cell iPS cells SRX977417,SR...RX127376,SRX146530,SRX146522,SRX146547,SRX333561,SRX035985,SRX1090869 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.50.AllAg.iPS_cells.bed ...

  3. File list: ALL.PSC.50.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.50.AllAg.iPS_cells hg19 All antigens Pluripotent stem cell iPS cells SRX088...16,SRX189400,SRX189399 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/ALL.PSC.50.AllAg.iPS_cells.bed ...

  4. File list: His.PSC.10.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.10.AllAg.iPS_cells hg19 Histone Pluripotent stem cell iPS cells SRX110016,S...315,SRX381309 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/His.PSC.10.AllAg.iPS_cells.bed ...

  5. File list: ALL.PSC.20.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.20.AllAg.iPS_cells hg19 All antigens Pluripotent stem cell iPS cells SRX088...27,SRX189400,SRX189399 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/ALL.PSC.20.AllAg.iPS_cells.bed ...

  6. File list: His.PSC.50.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.50.AllAg.iPS_cells hg19 Histone Pluripotent stem cell iPS cells SRX110015,S...079,SRX317585 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/His.PSC.50.AllAg.iPS_cells.bed ...

  7. File list: Pol.PSC.20.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.20.AllAg.iPS_cells mm9 RNA polymerase Pluripotent stem cell iPS cells SRX97...7435,SRX977434,SRX027462 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.20.AllAg.iPS_cells.bed ...

  8. File list: ALL.PSC.05.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.05.AllAg.iPS_cells hg19 All antigens Pluripotent stem cell iPS cells SRX753...00,SRX189399,SRX317607 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/ALL.PSC.05.AllAg.iPS_cells.bed ...

  9. File list: Pol.PSC.10.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.10.AllAg.iPS_cells mm9 RNA polymerase Pluripotent stem cell iPS cells SRX97...7435,SRX977434,SRX027462 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.10.AllAg.iPS_cells.bed ...

  10. File list: ALL.PSC.05.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.05.AllAg.iPS_cells mm9 All antigens Pluripotent stem cell iPS cells SRX9774...30,SRX146524,SRX146522,SRX146547 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.05.AllAg.iPS_cells.bed ...

  11. File list: Oth.PSC.50.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.50.AllAg.iPS_cells mm9 TFs and others Pluripotent stem cell iPS cells SRX97...RX146524 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.50.AllAg.iPS_cells.bed ...

  12. File list: Pol.PSC.50.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.50.AllAg.iPS_cells mm9 RNA polymerase Pluripotent stem cell iPS cells SRX97...7435,SRX977434,SRX027462 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.50.AllAg.iPS_cells.bed ...

  13. File list: DNS.PSC.20.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.20.AllAg.iPS_cells hg19 DNase-seq Pluripotent stem cell iPS cells SRX040379...,SRX040378,SRX135563,SRX040377,SRX040376,SRX189427,SRX189400,SRX189399 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/DNS.PSC.20.AllAg.iPS_cells.bed ...

  14. File list: DNS.PSC.10.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.10.AllAg.iPS_cells hg19 DNase-seq Pluripotent stem cell iPS cells SRX040379...,SRX040378,SRX040377,SRX040376,SRX135563,SRX189427,SRX189400,SRX189399 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/DNS.PSC.10.AllAg.iPS_cells.bed ...

  15. File list: Pol.PSC.05.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.05.AllAg.iPS_cells mm9 RNA polymerase Pluripotent stem cell iPS cells SRX97...7435,SRX027462,SRX977434 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Pol.PSC.05.AllAg.iPS_cells.bed ...

  16. File list: ALL.PSC.10.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.10.AllAg.iPS_cells hg19 All antigens Pluripotent stem cell iPS cells SRX753...09,SRX189400,SRX189399 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/ALL.PSC.10.AllAg.iPS_cells.bed ...

  17. File list: His.PSC.10.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.10.AllAg.iPS_cells mm9 Histone Pluripotent stem cell iPS cells SRX977417,SR...RX127372,SRX1090869,SRX127376,SRX035977,SRX146530,SRX146547,SRX146522 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.10.AllAg.iPS_cells.bed ...

  18. File list: Oth.PSC.20.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.20.AllAg.iPS_cells mm9 TFs and others Pluripotent stem cell iPS cells SRX97...RX146524 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.20.AllAg.iPS_cells.bed ...

  19. File list: DNS.PSC.05.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.05.AllAg.iPS_cells hg19 DNase-seq Pluripotent stem cell iPS cells SRX040379...,SRX040378,SRX040377,SRX040376,SRX135563,SRX189427,SRX189400,SRX189399 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/DNS.PSC.05.AllAg.iPS_cells.bed ...

  20. File list: His.PSC.20.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.20.AllAg.iPS_cells mm9 Histone Pluripotent stem cell iPS cells SRX127389,SR...RX127372,SRX127373,SRX1090869,SRX127376,SRX146530,SRX146522,SRX146547 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.20.AllAg.iPS_cells.bed ...

  1. Genomic imprinting is variably lost during reprogramming of mouse iPS cells.

    Science.gov (United States)

    Takikawa, Sachiko; Ray, Chelsea; Wang, Xin; Shamis, Yulia; Wu, Tien-Yuan; Li, Xiajun

    2013-09-01

    Derivation of induced pluripotent stem (iPS) cells is mainly an epigenetic reprogramming process. It is still quite controversial how genomic imprinting is reprogrammed in iPS cells. Thus, we derived multiple iPS clones from genetically identical mouse somatic cells. We found that parentally inherited imprint was variably lost among these iPS clones. Concurrent with the loss of DNA methylation imprint at the corresponding Snrpn and Peg3 imprinted regions, parental origin-specific expression of the Snrpn and Zim1 imprinted genes was also lost in these iPS clones. This loss of parental genomic imprinting in iPS cells was likely caused by the reprogramming process during iPS cell derivation because extended culture of iPS cells did not lead to significant increase in the loss of genomic imprinting. Intriguingly, one to several paternal chromosomes appeared to have acquired de novo methylation at the Snrpn and Zac1 imprinted regions in a high percentage of iPS clones. These results might have some implications for future therapeutic applications of iPS cells. Since DNA methylation imprint can be completely erased in some iPS clones at multiple imprinted regions, iPS cell reprogramming may also be employed to dissect the underlying mechanisms of erasure, reacquisition and maintenance of genomic imprinting in mammals. Copyright © 2013. Published by Elsevier B.V.

  2. File list: Oth.PSC.10.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.AllAg.iPS_cells mm9 TFs and others Pluripotent stem cell iPS cells SRX65...RX146524 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.10.AllAg.iPS_cells.bed ...

  3. File list: His.PSC.05.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.05.AllAg.iPS_cells mm9 Histone Pluripotent stem cell iPS cells SRX977417,SR...RX127374,SRX127373,SRX1090869,SRX333561,SRX146530,SRX146522,SRX146547 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/His.PSC.05.AllAg.iPS_cells.bed ...

  4. File list: ALL.PSC.10.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.10.AllAg.iPS_cells mm9 All antigens Pluripotent stem cell iPS cells SRX9774...30,SRX146524,SRX146547,SRX146522 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.10.AllAg.iPS_cells.bed ...

  5. File list: ALL.PSC.50.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.50.AllAg.iPS_cells mm9 All antigens Pluripotent stem cell iPS cells SRX9773...1,SRX035985,SRX1090869 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.50.AllAg.iPS_cells.bed ...

  6. File list: ALL.PSC.20.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.20.AllAg.iPS_cells mm9 All antigens Pluripotent stem cell iPS cells SRX9773...30,SRX146522,SRX146547 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/ALL.PSC.20.AllAg.iPS_cells.bed ...

  7. File list: His.PSC.20.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.20.AllAg.iPS_cells hg19 Histone Pluripotent stem cell iPS cells SRX110015,S...315,SRX381309 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/His.PSC.20.AllAg.iPS_cells.bed ...

  8. File list: Oth.PSC.05.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.AllAg.iPS_cells mm9 TFs and others Pluripotent stem cell iPS cells SRX65...RX146524 http://dbarchive.biosciencedbc.jp/kyushu-u/mm9/assembled/Oth.PSC.05.AllAg.iPS_cells.bed ...

  9. File list: DNS.PSC.50.AllAg.iPS_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.50.AllAg.iPS_cells hg19 DNase-seq Pluripotent stem cell iPS cells SRX040379...,SRX040378,SRX135563,SRX040376,SRX040377,SRX189427,SRX189400,SRX189399 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/DNS.PSC.50.AllAg.iPS_cells.bed ...

  10. Fast & scalable pattern transfer via block copolymer nanolithography

    DEFF Research Database (Denmark)

    Li, Tao; Wang, Zhongli; Schulte, Lars

    2015-01-01

    A fully scalable and efficient pattern transfer process based on block copolymer (BCP) self-assembling directly on various substrates is demonstrated. PS-rich and PDMS-rich poly(styrene-b-dimethylsiloxane) (PS-b-PDMS) copolymers are used to give monolayer sphere morphology after spin-casting of s...... on long range lateral order, including fabrication of substrates for catalysis, solar cells, sensors, ultrafiltration membranes and templating of semiconductors or metals....

  11. Ser-261 phospho-regulation is involved in pS256 and pS269-mediated aquaporin-2 apical translocation.

    Science.gov (United States)

    Yui, Naofumi; Ando, Fumiaki; Sasaki, Sei; Uchida, Shinichi

    2017-08-26

    Vasopressin catalyzes aquaporin-2 phosphorylation at several serine sites in the C-terminal region. Compared with Ser-256 and Ser-269 phosphorylation, the role of Ser-261 phospho-regulation on vasopressin-regulated AQP2 apical translocation is largely unknown. In addition, recent discovery of transcytotic apical delivery of AQP2 made the concept of its intracellular trafficking even more complicated. In this study, we evaluated how intact phospho-AQP2 signals fit with the transcytosis trafficking model in Madin-Darby canine kidney cells. PS256 and pS269 signals were intracellularly detectable in wild-type AQP2 at the beginning of forskolin stimulation (1 min). These phospho-signals were detectable in basolateral membranes even after 10 min of stimulation. AQP2 stably inserted in the apical membrane increased pS269 and decreased pS261 signals. In an NDI-causing mutant P262L-AQP2, in which Ser-261 phospho-regulation is impaired, the pS256 and pS269 signals were detectable in the basolateral membranes with increased pS261 signals after forskolin stimulation. These results suggest that Ser-261 phospho-regulation is involved in pS256- and pS269-mediated AQP2 apical translocation. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. Create and Publish a Hierarchical Progressive Survey (HiPS)

    Science.gov (United States)

    Fernique, P.; Boch, T.; Pineau, F.; Oberto, A.

    2014-05-01

    Since 2009, the CDS promotes a method for visualizing based on the HEALPix sky tessellation. This method, called “Hierarchical Progressive Survey" or HiPS, allows one to display a survey progressively. It is particularly suited for all-sky surveys or deep fields. This visualization method is now integrated in several applications, notably Aladin, the SiTools/MIZAR CNES framework, and the recent HTML5 “Aladin Lite". Also, more than one hundred surveys are already available in this view mode. In this article, we will present the progress concerning this method and its recent adaptation to the astronomical catalogs such as the GAIA simulation.

  13. Electrostatic septum for "Continuous Transfer" from PS to SPS

    CERN Multimedia

    CERN PhotoLab

    1982-01-01

    For "Continuous Transfer" to the SPS, the PS beam, after acceleration, is peeled off in 5 turns. To minimize losses, the magnetic septa are preceded by an electrostatic septum in straight section 31. We see the inner part of it, on a lab-bench. The first part consists of W-wires, the second part is a Mo-foil. The circulating beam passes through the opening, the ejected beam at the outside (above the wires, in this picture). This assembly is the anode-part, the cathode is not shown.

  14. Beam Quality Preservation in the CERN PS-SPS Complex

    CERN Multimedia

    Arduini, Gianluigi

    2004-01-01

    The LHC will require beams of unprecedented transverse and longitudinal brightness. Their production imposes tight constraints on the emittance growth in each element of the LHC injector chain, namely the PS-SPS Accelerator Complex. The problems encountered at the different stages of the acceleration in the complex span a wide range of topics, such as injection matching, RF gymnastics, space charge, transverse and longitudinal single- and coupled-bunch instabilities, and electron cloud effects. The measurement techniques developed and applied to identify and study the various sources of emittance dilution to the high precision required for the LHC beams and the solutions found to control such phenomena are illustrated.

  15. Lo irreductible social y lo irreductible psíquico

    Directory of Open Access Journals (Sweden)

    Vincent Gaulejac, de

    2017-06-01

    Full Text Available Con base en la reconstrucción de las polaridades explicativas -lo irreductible social y lo irreductible psíquico-que atraviesan a las ciencias sociales, este texto propone trascender los modelos antagónicos y excluyentes. El objetivo es instaurar en el centro de la reflexión la idea de la dialktica existencial que restituye al sujeto tanto el contexto socio-histórico en el cual está localizado como el deseo y la singularidad que lo constituyen en productor de la afirmación de su individualidad y su historicidad.

  16. PS potential performance with a higher injection energy

    CERN Document Server

    Gilardoni, S; Borburgh, J; Bodart, D; Chiggiato, P; Damerau, H; Hancock, S; Metral, G; Pittet, S; Rossi, C; Rumolo, G; Steerenberg, R; Widorski, M

    2011-01-01

    In the context of the LHC Injectors upgrade project, the PS has to be brought up to − and to operate reliably at − the level of performance required by the HL-LHC until the end of the LHC lifetime. The study has started on the potential benefits of increasing the injection energy. An overview of the impact of this upgrade will be presented, with a preliminary estimate of the beam characteristics at the SPS entrance and the remaining performance limitations. The necessary hardware modifications will be described, highlighting the critical systems and the risks. The program for the 2011 machine studies and hardware interventions for refining these plans will be presented.

  17. Injection and transfer lines of the PS Booster

    CERN Multimedia

    Photographic Service

    1972-01-01

    In the foreground is the vacuum chamber for the 50 MeV proton beam coming from the Linac. The tank held by white frames houses the "Vertical Distributor", which deflects the Linac beam to the levels of the Booster's 4 superposed rings. After acceleration in the Booster, originally to 800 MeV, today to 1.4 GeV, the beams from the 4 rings are combined in the vertical plane and transfered to the 26 GeV PS. The "Recombination Line", intersecting the injection line, crosses the picture from left to right.

  18. Search for Decays of Heavy Neutrinos with the PS Beam

    CERN Multimedia

    2002-01-01

    The experiment searches for neutrino decay, primarily into the e|+e|-@n^e and @g@g@n^e modes. Neutrino masses in the region between 1 and 400~MeV will be explored. The beam used is the neutrino PS beam used for the oscillation experiments. The apparatus consists of a decay volume @=30~m long and a calorimeter @=8~radiation lengths thick and @=20~m|2 in surface. The detectors are flash-tube modules of the type developed at Saclay for the proton-stability experiment. Scintillator hodoscopes give the timing information necessary for the trigger logic and background rejection.

  19. Reliability and maintenance analysis of the CERN PS booster

    CERN Document Server

    Staff, P S B

    1977-01-01

    The PS Booster Synchrotron being a complex accelerator with four superposed rings and substantial additional equipment for beam splitting and recombination, doubts were expressed at the time of project authorization as to its likely operational reliability. For 1975 and 1976, the average down time was 3.2% (at least one ring off) or 1.5% (all four rings off). The items analysed are: operational record, design features, maintenance, spare parts policy, operating temperature, effects of thunderstorms, fault diagnostics, role of operations staff and action by experts. (15 refs).

  20. Viscometric characterization of PS/POSS hybrid nanocomposites

    OpenAIRE

    Bianchi, Otávio; Repenning, Gustavo B.; Mauler, Raquel S.; Oliveira, Ricardo V. B.; Canto, Leonardo B.

    2012-01-01

    Nanocompósitos híbridos de poliestireno (PS) e poliedros oligoméricos silsesquioxanos (POSS) com diferentes composições e graus de hibridização foram obtidos por processamento reativo no estado fundido utilizando-se peróxido de dicumila (DCP) como iniciador, na presença ou não de estireno como agente de transferência de radical. Os materiais foram caracterizados viscosimetricamente por cromatografia de permeação em gel (GPC) usando detecção tripla por espalhamento de luz, viscosimetria e índi...

  1. A multiturn measurement system for the CERN PS

    CERN Document Server

    Angoletta, Maria Elena

    2002-01-01

    Multiturn beam position measurements on one or more pickups provide very important information needed to derive machine optics parameters. A variety of analyses is possible, such as determination of phase advance, detuning with amplitude, and most important, the exploration of phase space. In this paper we present a new multiturn acquisition system for the CERN proton synchrotron (CERN PS) based on a compact PCI fast digitiser and a new general object-oriented visualisation and analysis tool for the acquired multiturn data. (11 refs).

  2. TRPV-1-mediated elimination of residual iPS cells in bioengineered cardiac cell sheet tissues

    Science.gov (United States)

    Matsuura, Katsuhisa; Seta, Hiroyoshi; Haraguchi, Yuji; Alsayegh, Khaled; Sekine, Hidekazu; Shimizu, Tatsuya; Hagiwara, Nobuhisa; Yamazaki, Kenji; Okano, Teruo

    2016-01-01

    The development of a suitable strategy for eliminating remaining undifferentiated cells is indispensable for the use of human-induced pluripotent stem (iPS) cell-derived cells in regenerative medicine. Here, we show for the first time that TRPV-1 activation through transient culture at 42 °C in combination with agonists is a simple and useful strategy to eliminate iPS cells from bioengineered cardiac cell sheet tissues. When human iPS cells were cultured at 42 °C, almost all cells disappeared by 48 hours through apoptosis. However, iPS cell-derived cardiomyocytes and fibroblasts maintained transcriptional and protein expression levels, and cardiac cell sheets were fabricated after reducing the temperature. TRPV-1 expression in iPS cells was upregulated at 42 °C, and iPS cell death at 42 °C was TRPV-1-dependent. Furthermore, TRPV-1 activation through thermal or agonist treatment eliminated iPS cells in cardiac tissues for a final concentration of 0.4% iPS cell contamination. These findings suggest that the difference in tolerance to TRPV-1 activation between iPS cells and iPS cell-derived cardiac cells could be exploited to eliminate remaining iPS cells in bioengineered cell sheet tissues, which will further reduce the risk of tumour formation. PMID:26888607

  3. TRPV-1-mediated elimination of residual iPS cells in bioengineered cardiac cell sheet tissues.

    Science.gov (United States)

    Matsuura, Katsuhisa; Seta, Hiroyoshi; Haraguchi, Yuji; Alsayegh, Khaled; Sekine, Hidekazu; Shimizu, Tatsuya; Hagiwara, Nobuhisa; Yamazaki, Kenji; Okano, Teruo

    2016-02-18

    The development of a suitable strategy for eliminating remaining undifferentiated cells is indispensable for the use of human-induced pluripotent stem (iPS) cell-derived cells in regenerative medicine. Here, we show for the first time that TRPV-1 activation through transient culture at 42 °C in combination with agonists is a simple and useful strategy to eliminate iPS cells from bioengineered cardiac cell sheet tissues. When human iPS cells were cultured at 42 °C, almost all cells disappeared by 48 hours through apoptosis. However, iPS cell-derived cardiomyocytes and fibroblasts maintained transcriptional and protein expression levels, and cardiac cell sheets were fabricated after reducing the temperature. TRPV-1 expression in iPS cells was upregulated at 42 °C, and iPS cell death at 42 °C was TRPV-1-dependent. Furthermore, TRPV-1 activation through thermal or agonist treatment eliminated iPS cells in cardiac tissues for a final concentration of 0.4% iPS cell contamination. These findings suggest that the difference in tolerance to TRPV-1 activation between iPS cells and iPS cell-derived cardiac cells could be exploited to eliminate remaining iPS cells in bioengineered cell sheet tissues, which will further reduce the risk of tumour formation.

  4. [Induced pluripotent stem (iPS) cell - issues for clinical application - ].

    Science.gov (United States)

    Aoi, Takashi

    2013-01-01

    Induced pluripotent stem (iPS) cells are generated from somatic cells by introducing small sets of transcription factors. iPS cells demonstrate pluripotency and the ability to self-renew. In addition, iPS cells can be generated from donor individuals with particular characteristics. Based on these features, iPS cells are expected to be applicable in drug discovery, the study of disease mechanisms and cell therapy. From a technical point of view, "diversity" is the key word. At present, iPS cells can be derived using various techniques, resulting in diversity in the quality of iPS cells generated. Therefore, optimization of the derivation technology is one of the most important issues. Another "diversity" is in the propensities amongst iPS cell lines derived using similar techniques. Thus, strategies for selecting good quality lines remain to be established. Considering such technical hurdles, establishment of an iPS cell bank consisting of high quality and versatile iPS lines is a promising idea because of the merits of cost and quality control. Now, we are exploring relevant parameters for the quality control of banked cells. The challenges facing clinical application of iPS cells are new but not unprecedented. To realize clinical applications of iPS cells, we need to make these challenges clear and overcome them through partnership not only with industry, governments and universities, but also patients and society at large.

  5. Methods for iPS cell generation for basic research and clinical applications.

    Science.gov (United States)

    Mochiduki, Yuji; Okita, Keisuke

    2012-06-01

    The induction of pluripotency can be achieved by forced expression of defined factors in somatic cells. The established cells, termed induced pluripotent stem (iPS) cells, have pluripotency and an infinite capacity for self-renewal in common with embryonic stem (ES) cells. Patient-specific iPS cells could be a useful source for drug discovery and cell transplantation therapies; however, the original method for iPS cell generation had several issues that were obstacles to their clinical application. Recent studies have brought about various improvements for iPS cell generation and uncovered several characteristics of iPS cells. Here we summarize the current status of iPS cell studies, with a focus on the improved methods that can be used to generate iPS cells, and also refer to the future challenges. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Properties of Extruded PS-212 Type Self-Lubricating Materials

    Science.gov (United States)

    Waters, W. J.; Sliney, H. E.; Soltis, R. F.

    1993-01-01

    Research has been underway at the NASA Lewis Research Center since the 1960's to develop high temperature, self-lubricating materials. The bulk of the research has been done in-house by a team of researchers from the Materials Division. A series of self-lubricating solid material systems has been developed over the years. One of the most promising is the composite material system referred to as PS-212 or PM-212. This material is a powder metallurgy product composed of metal bonded chromium carbide and two solid lubricating materials known to be self-lubricating over a wide temperature range. NASA feels this material has a wide potential in industrial applications. Simplified processing of this material would enhance its commercial potential. Processing changes have the potential to reduce processing costs, but tribological and physical properties must not be adversely affected. Extrusion processing has been employed in this investigation as a consolidation process for PM-212/PS-212. It has been successful in that high density bars of EX-212 (extruded PM-212) can readily be fabricated. Friction and strength data indicate these properties have been maintained or improved over the P.M. version. A range of extrusion temperatures have been investigated and tensile, friction, wear, and microstructural data have been obtained. Results indicate extrusion temperatures are not critical from a densification standpoint, but other properties are temperature dependent.

  7. Preparations for Upgrading the RF Systems of the PS Booster

    CERN Document Server

    Albright, Simon; Shaposhnikova, Elena

    2016-01-01

    The accelerators of the LHC injector chain need to be upgraded to provide the HL-LHC beams. The PS Booster, the first synchrotron in the LHC injection chain, uses three different RF systems (first, second and up to tenth harmonic) in each of its four rings. As part of the LHC Injector Upgrade the current ferrite RF systems will be replaced with broadband Finemet cavities, increasing the flexibility of the RF system. A Finemet test cavity has been installed in Ring 4 to investigate its effect on machine performance, especially beam stability, during extensive experimental studies. Due to large space charge impedance Landau damping is lost through most of the cycle in single harmonic operation, but is recovered when using the second harmonic and controlled longitudinal emittance blow-up. This paper compares beam parameters during acceleration with and without the Finemet test cavity. Comparisons were made using beam measurements and simulations with the BLonD code based on a full PS Booster impedance model. Thi...

  8. KSR-based medium improves the generation of high-quality mouse iPS cells.

    Science.gov (United States)

    Liu, Kai; Wang, Fang; Ye, Xiaoying; Wang, Lingling; Yang, Jiao; Zhang, Jingzhuo; Liu, Lin

    2014-01-01

    Induced pluripotent stem (iPS) cells from somatic cells have great potential for regenerative medicine. The efficiency in generation of iPS cells has been significantly improved in recent years. However, the generation of high-quality iPS cells remains of high interest. Consistently, we demonstrate that knockout serum replacement (KSR)-based medium accelerates iPS cell induction and improves the quality of iPS cells, as confirmed by generation of chimeras and all iPS cell-derived offspring with germline transmission competency. Both alkaline phosphatase (AP) activity assay and expression of Nanog have been used to evaluate the efficiency of iPS cell induction and formation of ES/iPS cell colonies; however, appropriate expression of Nanog frequently indicates the quality of ES/iPS cells. Interestingly, whereas foetal bovine serum (FBS)-based media increase iPS cell colony formation, as revealed by AP activity, KSR-based media increase the frequency of iPS cell colony formation with Nanog expression. Furthermore, inhibition of MAPK/ERK by a specific inhibitor, PD0325901, in KSR- but not in FBS-based media significantly increases Nanog-GFP+ iPS cells. In contrast, addition of bFGF in KSR-based media decreases proportion of Nanog-GFP+ iPS cells. Remarkably, PD can rescue Nanog-GFP+ deficiency caused by bFGF. These data suggest that MAPK/ERK pathway influences high quality mouse iPS cells and that KSR- and PD-based media could enrich homogeneous authentic pluripotent stem cells.

  9. MicroRNA expression profiles of human iPS cells, retinal pigment epithelium derived from iPS, and fetal retinal pigment epithelium.

    Science.gov (United States)

    Greene, Whitney A; Muñiz, Alberto; Plamper, Mark L; Kaini, Ramesh R; Wang, Heuy-Ching

    2014-06-24

    The objective of this report is to describe the protocols for comparing the microRNA (miRNA) profiles of human induced-pluripotent stem (iPS) cells, retinal pigment epithelium (RPE) derived from human iPS cells (iPS-RPE), and fetal RPE. The protocols include collection of RNA for analysis by microarray, and the analysis of microarray data to identify miRNAs that are differentially expressed among three cell types. The methods for culture of iPS cells and fetal RPE are explained. The protocol used for differentiation of RPE from human iPS is also described. The RNA extraction technique we describe was selected to allow maximal recovery of very small RNA for use in a miRNA microarray. Finally, cellular pathway and network analysis of microarray data is explained. These techniques will facilitate the comparison of the miRNA profiles of three different cell types.

  10. Comparison of implosion core metrics: A 10 ps dilation X-ray imager vs a 100 ps gated microchannel plate

    Science.gov (United States)

    Nagel, S. R.; Benedetti, L. R.; Bradley, D. K.; Hilsabeck, T. J.; Izumi, N.; Khan, S.; Kyrala, G. A.; Ma, T.; Pak, A.

    2016-11-01

    The dilation x-ray imager (DIXI) [T. J. Hilsabeck et al., Rev. Sci. Instrum. 81, 10E317 (2010); S. R. Nagel et al., ibid. 83, 10E116 (2012); S. R. Nagel et al., ibid. 85, 11E504 (2014)] is a high-speed x-ray framing camera that uses the pulse-dilation technique to achieve a temporal resolution of less than 10 ps. This is a 10 × improvement over conventional framing cameras currently employed on the National Ignition Facility (NIF) (100 ps resolution), and otherwise only achievable with 1D streaked imaging. A side effect of the dramatically reduced gate width is the comparatively lower detected signal level. Therefore we implement a Poisson noise reduction with non-local principal component analysis method [J. Salmon et al., J. Math. Imaging Vision 48, 279294 (2014)] to improve the robustness of the DIXI data analysis. Here we present results on ignition-relevant experiments at the NIF using DIXI. In particular we focus on establishing that/when DIXI gives reliable shape metrics (P0, P2, and P4 Legendre modes, and their temporal evolution/swings).

  11. Role of insulin receptor and insulin signaling on αPS2CβPS integrins' lateral diffusion.

    Science.gov (United States)

    Mainali, Dipak; Syed, Aleem; Arora, Neha; Smith, Emily A

    2014-12-01

    Integrins are ubiquitous transmembrane receptors with adhesion and signaling properties. The influence of insulin receptor and insulin signaling on αPS2CβPS integrins' lateral diffusion was studied using single particle tracking in S2 cells before and after reducing the insulin receptor expression or insulin stimulation. Insulin signaling was monitored by Western blotting for phospho-Akt expression. The expression of the insulin receptor was reduced using RNA interference (RNAi). After insulin receptor RNAi, four significant changes were measured in integrin diffusion properties: (1) there was a 24% increase in the mobile integrin population, (2) 14% of the increase was represented by integrins with Brownian diffusion, (3) for integrins that reside in confined zones of diffusion, there was a 45% increase in the diameter of the confined zone, and (4) there was a 29% increase in the duration integrins spend in confined zones of diffusion. In contrast to reduced expression of the insulin receptor, which alters integrin diffusion properties, insulin stimulation alone or insulin stimulation under conditions of reduced insulin receptor expression have minimal effects on altering the measured integrin diffusion properties. The differences in integrin diffusion measured after insulin receptor RNAi in the presence or absence of insulin stimulation may be the result of other insulin signaling pathways that are activated at reduced insulin receptor conditions. No change in the average integrin diffusion coefficient was measured for any conditions included in this study.

  12. Hydrogen sulfide down-regulates BACE1 and PS1 via activating PI3K/Akt pathway in the brain of APP/PS1 transgenic mouse.

    Science.gov (United States)

    He, Xuan-Li; Yan, Ning; Chen, Xiao-Shan; Qi, Yun-Wen; Yan, Yong; Cai, Zhiyou

    2016-10-01

    Endogenous hydrogen sulfide (H2S) may have multiple physiological functions in brain. Our previous study showed that H2S improved spatial memory impairment and decreased the production of Aβ in APP/PS1 transgenic mice. However, many of the underlying mechanisms are not still being elucidated. The aim of the present study is to investigate the neuroprotective mechanisms of H2S involving in the activity of β-secretase (BACE1), γ-secretase (PS1) and α-secretase (ADAM17). Morris water maze was used to measure the behavior change. The levels of Aβ40 and Aβ42 were quantified using colorimetric ELISA kits and immunohistochemical analysis. The levels of BACE1, PS1, ADAM17, pAkt, pp38MAPK, pERK and pJNK were tested by Western blot analysis in normal mice, APP/PS1 transgenic mice and 50μmol/kg-NaHS-treated transgenic mice. On the basis of exogenous H2S treatment, LY294002 (inhibitors of PI3K/Akt) or PD98059 (inhibitors of MAPK/ERK) was injected into lateral cerebral ventricle. The levels of BACE1, PS1 and pp38MAPK were increased and ADAM17 were decreased in the APP/PS1 transgenic mice. After intraperitoneal administration of an H2S donor (NaHS) into APP/PS1 mice, the levels of BACE1, PS1 and pp38MAPK were reduced and ADAM17 increased. The level of pp38 MAPKs, pAkt and pERK1/2 was increased in APP/PS1 transgenic mice compared with normal mice (ptransgenic mice and normal mice (p>0.05). These results demonstrated that LY294002 inhibited the effect of H2S on decreasing the BACE1 and PS1, reducing the level of Aβ and improving memory impairment in APP/PS1 transgenic mice. PD98059 had no influence on the expression of BACE1 and PS1. H2S inhibits the expression of BACE1 and PS1 by activating PI3K/Akt pathway in AD. Copyright © 2016 Institute of Pharmacology, Polish Academy of Sciences. Published by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

  13. Development and characterization of sub-100 ps photomultiplier tubes.

    Science.gov (United States)

    Horsfield, C J; Rubery, M S; Mack, J M; Young, C S; Herrmann, H W; Caldwell, S E; Evans, S C; Sedilleo, T J; Kim, Y H; McEvoy, A; Milnes, J S; Howorth, J; Davis, B; O'Gara, P M; Garza, I; Miller, E K; Stoeffl, W; Ali, Z

    2010-10-01

    We describe the evaluation of a microchannel plate (MCP) photomultiplier tube (PMT), incorporating a 3 μm pore MCP and constant voltage anode and cathode gaps. The use of the small pore size results in PMTs with response functions of the order of 85 ps full-width-half-maximum, while the constant electric field across the anode and cathode gaps produces a uniform response function over the entire operating range of the device. The PMT was characterized on a number of facilities and employed on gas Cherenkov detectors fielded on various deuterium tritium fuel (DT) implosions on the Omega Laser Facility at the University of Rochester. The Cherenkov detectors are part of diagnostic development to measure Gamma ray reaction history for DT implosions on the National Ignition Facility.

  14. An Antiproton Decelerator in the CERN PS Complex

    CERN Document Server

    Riunaud, J P; Baird, S A; Boillot, J; Bosser, Jacques; Brouet, M; Caspers, Friedhelm; Chanel, M; Chohan, V; Eriksson, T; Garoby, R; Giannini, R; Giovannozzi, Massimo; Gruber, J; Hémery, J Y; Koziol, Heribert; MacCaferri, R; Maury, S; Metzmacher, K D; Möhl, D; Mulder, H; Pedersen, F; Perriollat, F; Poncet, Alain; Riunaud, J P; Serre, C; Simon, Daniel Jean; Tranquille, G; Tuyn, Jan Willem Nicolaas; Williams, B; Williams, D J

    1996-01-01

    The present CERN PS low-energy antiproton complex involves 4 machines to collect, cool, decelerate and supply experiments with up to 1010 antiprotons per pulse and per hour of momenta ranging from 0.1 to 2 GeV/c. In view of a possible future physics programme requiring low energy antiprotons, mainly to carry out studies on antihydrogen, a simplified scheme providing at low cost antiprotons at 100 MeV/c has been studied. It requires only one machine, the present Antiproton Collector (AC) converted into a cooler and decelerator (Antiproton Decelerator, AD) and delivering beam to experiments in the hall of the present Antiproton Accumulator Complex (AAC) [1]. This paper describes the feasibility study of such a scheme [2].

  15. MD on Head-Tail Instability in the PS Booster

    CERN Document Server

    Kornilov, V; Mikulec, B; Aumon, S; Rumolo, G

    2013-01-01

    Machine study experiments on the coherent instabilities appearing along the magnetic ramp have been performed at the CERN PS Booster synchrotron in the week of June 11-15, 2012. The space- and time structure of the head-tail instabilities was recorded by the triggered pick-up signals due to reproducibility of the occurrence time in the shot-by-shot sense. The intensity thresholds, the absolute growth rates and the mode structure have been compared for the bunches in the single-rf and in three types of the double-rf operation. The growth rates are compared to the instantaneous synchrotron frequencies, in the cases of the large corresponding ratio the head-tail mode structure is deformed by the driving impedance. Bunch parameters measurements indicate that the PSB bunches are in the regime of very strong transverse space-charge all along the magnetic ramp.

  16. Migrating the CERN PS control system to IBM workstations

    CERN Document Server

    De Metz-Noblat, N

    1995-01-01

    The workstations used within the control system of the CERN PS accelerator complex are not produced any more. We had therefore to review the software primary used as user interface and we achieved a port to IBM workstations. We are also preparing the maintenance of this code for the next ten years with minimal staff. This implies a clear separation between general computing facilities, control system developments, and operation. In order to share our experience, we will try to summarize various aspects of this migration: - system installation principles used to speed-up error recovery time and long-term maintenance costs, - problems correlated with the coexistence of two different platforms during migration, - software problems due to the platform and operating system changes, - hidden dependencies from a specific manufacturer.

  17. Multipole Stack for the 800 MeV PS Booster

    CERN Multimedia

    1975-01-01

    The 800 MeV PS Booster had seen first beam in its 4 superposed rings in 1972, routine operation began in 1973. In the strive for ever higher beam intensities, the need for additional multipole lenses became evident. After detailed studies, the manufacture of 8 stacks of multipoles was launched in 1974. Each stack consists of 4 superposed multipoles and each multipole has 4 concentric shells. From the innermost to the outermost shell, Type A contains octupole, skew-octupole, sextupole, skew-sextupole. Type B contains skew-octupole, skew-sextupole, vertical dipole, horizontal dipole. Completion of installation in 1976 opened the way to higher beam intensities. M. Battiaz is seen here with a multipole stack and its many electrical connections.

  18. First PS magnet unit, with members of the Magnet Group.

    CERN Multimedia

    CERN PhotoLab

    1956-01-01

    Members of the Magnet Group, sitting atop the first unit of the PS combined-function magnet. The picture was taken at the Institute of Physics of Geneva University, as CERN was still a muddy construction site at that time. All these people have now retired, but all of the magnets are still pulsing away. Front row (left to right): R.Tinguely, C.Germain, G.Plass, D.Neet, B.de Raad, M.Cavallaro, K.H.Reich, G.Kuhn, J.Nilsson, C.A.Ramm, Paillard. Second row: L.Resegotti, M.Niklaus, C.J.Zilverschoon, R.Bertolotto, Marcellin, G.Brianti, P.Collet. Standing behind: B.Kuiper.

  19. Sub-10ps monolithic and low-power photodetector readout

    Energy Technology Data Exchange (ETDEWEB)

    Varner, Gary S.; Ruckman, Larry L.

    2009-02-20

    Recent advances in photon detectors have resulted in high-density imaging arrays that offer many performance and cost advantages. In particular, the excellent transit time spread of certain devices show promise to provide tangible benefits in applications such as Positron Emission Tomography (PET). Meanwhile, high-density, high-performance readout techniques have not kept on pace for exploiting these developments. Photodetector readout for next generation high event rate particle identification and time-resolved PET requires a highly-integrated, low-power, and cost-effective readout technique. We propose fast waveform sampling as a method that meets these criteria and demonstrate that sub-10ps resolution can be obtained for an existing device.

  20. Small-size meshless 50 ps streak tube

    Science.gov (United States)

    Ageeva, N. V.; Andreev, S. V.; Belolipetski, V. S.; Bryukhnevich, G. I.; Greenfield, D. E.; Ivanova, S. R.; Kaverin, A. M.; Khohlova, A. N.; Kuz'menko, E. A.; Levina, G. P.; Makushina, V. A.; Monastyrskiy, M. A.; Schelev, M. Ya.; Semichastnova, Z. M.; Serdyuchenko, Yu. N.; Skaballanovich, T. A.; Sokolov, V. E.

    2008-11-01

    In contrast to the conventional image intensifier with large work area, a streak image tube should possess additional important feature - the comparatively small temporal distortion at the entire work area of the photocathode. With this additional engineering restriction taken into account, a novel small-size meshless streak image tube has been developed by means of numerical optimization. The tube with 25-mm wide work area contains a pair of deflection plates to sweep the electron image along the 25 mm output phosphor screen that is separated by 100 mm from the photocathode. The electron image can be shuttered with a 300 V blanking electric pulse. Electron-optical magnification of the tube is unit; spatial resolution reaches 30 lp/mm over the entire photocathode work area; temporal resolution lies in the 20 - 50 ps range, depending on the accelerating voltage (6 - 15 kV).

  1. Psödohipoparatiroidi Tip 1A: Olgu Sunumu

    Directory of Open Access Journals (Sweden)

    Mehmet Güven

    2017-06-01

    Full Text Available Psödohipoparatiroidizm (PHPT; hedef organın parathormona (PTH yanıt vermediği kalıtımsal bir bozukluktur. Biyokimyasal olarak; hipokalsemi, hiperfosfatemi ve PTH yüksekliği ile karakterizedir. PTH uygulamasına verilen yanıt belirgin derecede düşüktür. Tip 1A, biyokimyasal özelliklere ek olarak Albright herediter osteodistrofisi (AHO olarak bilinen karakteristik somatik bir fenotipe de sahiptir. Bu fenotipin, kısa boy, yuvarlak yüz, frontal bombelik, brakidaktili, obezite özelikleri bulunmaktadır. Burada biz, hipokalsemi ve Albright herediter osteodistrofisi tanısı koyduğumuz; kalsiyum, aktif D vitamini ile tedavi ettiğimiz olgumuzu sunduk.

  2. Updating the Psoriatic Arthritis (PsA) Core Domain Set: A Report from the PsA Workshop at OMERACT 2016.

    Science.gov (United States)

    Orbai, Ana-Maria; de Wit, Maarten; Mease, Philip J; Callis Duffin, Kristina; Elmamoun, Musaab; Tillett, William; Campbell, Willemina; FitzGerald, Oliver; Gladman, Dafna D; Goel, Niti; Gossec, Laure; Hoejgaard, Pil; Leung, Ying Ying; Lindsay, Chris; Strand, Vibeke; van der Heijde, Désirée M; Shea, Bev; Christensen, Robin; Coates, Laura; Eder, Lihi; McHugh, Neil; Kalyoncu, Umut; Steinkoenig, Ingrid; Ogdie, Alexis

    2017-10-01

    To include the patient perspective in accordance with the Outcome Measures in Rheumatology (OMERACT) Filter 2.0 in the updated Psoriatic Arthritis (PsA) Core Domain Set for randomized controlled trials (RCT) and longitudinal observational studies (LOS). At OMERACT 2016, research conducted to update the PsA Core Domain Set was presented and discussed in breakout groups. The updated PsA Core Domain Set was voted on and endorsed by OMERACT participants. We conducted a systematic literature review of domains measured in PsA RCT and LOS, and identified 24 domains. We conducted 24 focus groups with 130 patients from 7 countries representing 5 continents to identify patient domains. We achieved consensus through 2 rounds of separate surveys with 50 patients and 75 physicians, and a nominal group technique meeting with 12 patients and 12 physicians. We conducted a workshop and breakout groups at OMERACT 2016 in which findings were presented and discussed. The updated PsA Core Domain Set endorsed with 90% agreement by OMERACT 2016 participants included musculoskeletal disease activity, skin disease activity, fatigue, pain, patient's global assessment, physical function, health-related quality of life, and systemic inflammation, which were recommended for all RCT and LOS. These were important, but not required in all RCT and LOS: economic cost, emotional well-being, participation, and structural damage. Independence, sleep, stiffness, and treatment burden were on the research agenda. The updated PsA Core Domain Set was endorsed at OMERACT 2016. Next steps for the PsA working group include evaluation of PsA outcome measures and development of a PsA Core Outcome Measurement Set.

  3. First observation of o-Ps to p-Ps transition and first direct measurement of positronium hyperfine splitting with sub-THz light

    Energy Technology Data Exchange (ETDEWEB)

    Yamazaki, Takayuki, E-mail: yamazaki@icepp.s.u-tokyo.ac.jp; Miyazaki, Akira; Suehara, Taikan; Namba, Toshio; Asai, Shoji; Kobayashi, Tomio [University of Tokyo, Department of Physics, Graduate School of Science, and International Center for Elementary Particle Physics (Japan); Saito, Haruo [University of Tokyo, Graduate School of Arts and Sciences (Japan); Urushizaki, Yuichi; Ogawa, Isamu; Idehara, Toshitaka [University of Fukui, Research Center for Development of Far-Infrared Region (Japan); Sabchevski, Svilen [Bulgarian Academy of Sciences (Bulgaria)

    2012-12-15

    Positronium is an ideal system for the research of the bound state QED. The hyperfine splitting of positronium (Ps-HFS, about 203 GHz) is an important observable but all previous measurements of Ps-HFS had been measured indirectly using Zeeman splitting. There might be the unknown systematic errors on the uniformity of magnetic field. We are trying to measure Ps-HFS directly using sub-THz radiation. We developed an optical system to accumulate high power (about 10 kW) radiation in a Fabry-Perot resonant cavity and observed the positronium hyperfine transition for the first time.

  4. Delay-line cables for the fast bumpers in the PS.

    CERN Multimedia

    CERN PhotoLab

    1976-01-01

    For 'continuous transfer' to the SPS, the beam accelerated in the PS is shaved off over several turns, so as to form a continuous sequence of bunches several times the length of the PS circumference. Fast bumpers, powered in a 'staircase' way, displace the PS beam stepwise towards the ejection septum. Each step lasts 2.1 microsec and the cable drums in this picture contain some of the bumper delay-lines of altogether 10 km.

  5. A DiPS+ case study: a self-healing RADIUS server

    OpenAIRE

    Michiels, Sam; Desmet, Lieven; Verbaeten, Pierre

    2004-01-01

    This report shows performance results of a RADIUS implementation using the DiPS+ software architecture. In addition it compares this implementation with a commercially available RADIUS implementation, and shows that the DiPS+ architecture differentiates between user types and request types. In fact, the DiPS+ prototype prioritizes incoming traffic based on application-specifc preferences, and allocates the available processing resources to the highest priority requests.

  6. Microfabricated device for co-culture of sympathetic neuron and iPS-derived cardiomyocytes.

    Science.gov (United States)

    Takeuchi, Akimasa; Shimba, Kenta; Takayama, Yuzo; Kotani, Kiyoshi; Lee, Jong-Kook; Noshiro, Makoto; Jimbo, Yasuhiko

    2013-01-01

    Induced pluripotent stem (iPS) cell-derived cardiomyocytes (iPS-CMs) has been expected as a cell source for therapy of serious heart failure. However, it is unclear whether the function of iPS-CMs is modulated by the host sympathetic nervous system. Here we developed a device for co-culture of sympathetic neurons and iPS-CMs using microfabrication technique. The device consisted of a culture chamber and a microelectrode-array (MEA) substrate. The superior cervical ganglion (SCG) neurons were co-cultured with iPS-CMs in a microfabricated device, which had multiple compartments. Several days after seeding, synapses were formed between SCG neurons and iPS-CMs, as confirmed by immunostaining. Spontaneous electrical activities of the SCG neurons and the iPS-CMs were observed from the electrode of the MEA substrate. The beat rate of iPS-CMs increased after electrical stimulation of the co-cultured SCG neurons. Such changes in the beat rate were prevented in the presence of propranolol, a β-adrenoreceptor antagonist. These results suggest that the microfabricated device will be utilized for studying the functional modulation of iPS-CMs by connected sympathetic neurons.

  7. Facile Synthesis of Mono-Dispersed Polystyrene (PS/Ag Composite Microspheres via Modified Chemical Reduction

    Directory of Open Access Journals (Sweden)

    Wen Zhu

    2013-12-01

    Full Text Available A modified method based on in situ chemical reduction was developed to prepare mono-dispersed polystyrene/silver (PS/Ag composite microspheres. In this approach; mono-dispersed PS microspheres were synthesized through dispersion polymerization using poly-vinylpyrrolidone (PVP as a dispersant at first. Then, poly-dopamine (PDA was fabricated to functionally modify the surfaces of PS microspheres. With the addition of [Ag(NH32]+ to the PS dispersion, [Ag(NH32]+ complex ions were absorbed and reduced to silver nanoparticles on the surfaces of PS-PDA microspheres to form PS/Ag composite microspheres. PVP acted both as a solvent of the metallic precursor and as a reducing agent. PDA also acted both as a chemical protocol to immobilize the silver nanoparticles at the PS surface and as a reducing agent. Therefore, no additional reducing agents were needed. The resulting composite microspheres were characterized by TEM, field emission scanning electron microscopy (FESEM, energy-dispersive X-ray spectroscopy (EDS, XRD, UV-Vis and surface-enhanced Raman spectroscopy (SERS. The results showed that Ag nanoparticles (NPs were homogeneously immobilized onto the PS microspheres’ surface in the presence of PDA and PVP. PS/Ag composite microspheres were well formed with a uniform and compact shell layer and were adjustable in terms of their optical property.

  8. Lehtmets : psühhiaatria ei ole piisavalt atraktiivne / Andres Lehtmets ; interv. Marika Kusnets

    Index Scriptorium Estoniae

    Lehtmets, Andres

    2004-01-01

    Vestlus Eesti Psühhiaatrite Seltsi aseesimehega rahva vaimsest tervisest. Samas ka sotsiaalministeeriumi rahvatervise osakonna peaspetsialisti Helja Eomoisi kommentaar: Mida teeb ministeerium rahva vaimse tervise parandamiseks?

  9. Molecular characterization of plasmids pS7a and pS7b from Lactococcus lactis subsp. lactis bv. diacetylactis S50 as a base for the construction of mobilizable cloning vectors.

    Science.gov (United States)

    Strahinic, I; Kojic, M; Tolinacki, M; Fira, D; Topisirovic, L

    2009-01-01

    Strain Lactococcus lactis subsp. lactis bv. diacetylactis S50 harbours five theta-replicating plasmids (pS6, pS7a, pS7b, pS80 and pS140). The aim of this study was to characterize domains involved in the replication and conjugative mobilization of the small plasmids pS7a and pS7b, which are structurally very similar. Complete nucleotide sequences of pS7a and pS7b were determined by cloning DNA fragments of different sizes into Escherichia coli vectors. Linearized plasmids and four EcoRI fragments of the pS7a and pS7b were cloned into an origin probe vector. Constructed plasmids (pSEV10, pSK10, pISE1a and pISE1b) were able to replicate in the strain L. lactis subsp. cremoris MG1363. In addition, experiments showed that plasmids pS7a and pS7b contained oriT sequences and their conjugative transfer directly depended on the presence of pS80 in donor cells. Plasmids pS7a and pS7b contained typical lactococcal theta replication origin and repB gene that enable them to replicate in the strain L. lactis subsp. cremoris MG1363. Plasmid pS80 plays a key role in the conjugative transfer of small plasmids. Plasmids pS7a and pS7b-based derivatives could be valuable tools for genetic manipulation, studying processes of plasmid maintenance and horizontal gene transfer in lactococci.

  10. Neural stem cells differentiated from iPS cells spontaneously regain pluripotency.

    Science.gov (United States)

    Choi, Hyun Woo; Kim, Jong Soo; Choi, Sol; Hong, Yean Ju; Kim, Min Jung; Seo, Han Geuk; Do, Jeong Tae

    2014-10-01

    Differentiated somatic cells can be reprogrammed into pluripotent stem cells by transduction of exogenous reprogramming factors. After induced pluripotent stem (iPS) cells are established, exogenous genes are silenced. In the pluripotent state, retroviral genes integrated in the host genome are kept inactive through epigenetic transcriptional regulation. In this study, we tried to determine whether exogenous genes remain silenced or are reactivated upon loss of pluripotency or on differentiation using an in vitro system. We induced differentiation of iPS cells into neural stem cells (NSCs) in vitro; the NSCs appeared morphologically indistinguishable from brain-derived NSCs and stained positive for the NSC markers Nestin and Sox2. These iPS cell-derived NSCs (iPS-NSCs) were also capable of differentiating into all three neural subtypes. Interestingly, iPS-NSCs spontaneously formed aggregates on long-term culture and showed reactivation of the Oct4-GFP marker, which was followed by the formation of embryonic stem cell-like colonies. The spontaneously reverted green fluorescent protein (GFP)-positive (iPS-NSC-GFP(+) ) cells expressed high levels of pluripotency markers (Oct4 and Nanog) and formed germline chimeras, indicating that iPS-NSC-GFP(+) cells had the same pluripotency as the original iPS cells. The reactivation of silenced exogenous genes was tightly correlated with the downregulation of DNA methyltransferases (Dnmts) during differentiation of iPS cells. This phenomenon was not observed in doxycycline-inducible iPS cells, where the reactivation of exogenous genes could be induced only by doxycycline treatment. These results indicate that pluripotency can be regained through reactivation of exogenous genes, which is associated with dynamic change of Dnmt levels during differentiation of iPS cells. © 2014 AlphaMed Press.

  11. Phosphorene-directed self-assembly of asymmetric PS-b-PMMA block copolymer for perpendicularly-oriented sub-10 nm PS nanopore arrays

    Science.gov (United States)

    Zhang, Ziming; Zheng, Lu; Khurram, Muhammad; Yan, Qingfeng

    2017-10-01

    Few-layer black phosphorus, also known as phosphorene, is a new two-dimensional material which is of enormous interest for applications, mainly in electronics and optoelectronics. Herein, we for the first time employ phosphorene for directing the self-assembly of asymmetric polystyrene-block-polymethylmethacrylate (PS-b-PMMA) block copolymer (BCP) thin film to form the perpendicular orientation of sub-10 nm PS nanopore arrays in a hexagonal fashion normal to the interface. We experimentally demonstrate that none of the PS and PMMA blocks exhibit preferential affinity to the phosphorene-modified surface. Furthermore, the perpendicularly-oriented PS nanostructures almost stay unchanged with the variation of number of layers of few-layer phosphorene nanoflakes between 15-30 layers. Differing from the neutral polymer brushes which are widely used for chemical modification of the silicon substrate, phosphorene provides a novel physical way to control the interfacial interactions between the asymmetric PS-b-PMMA BCP thin film and the silicon substrate. Based on our results, it is possible to build a new scheme for producing sub-10 nm PS nanopore arrays oriented perpendicularly to the few-layer phosphorene nanoflakes. Furthermore, the nanostructural microdomains could serve as a promising nanolithography template for surface patterning of phosphorene nanoflakes.

  12. Beam lines from Linac 1 to PS and Booster

    CERN Multimedia

    CERN PhotoLab

    1978-01-01

    View against the direction of the proton beams. The 50 MeV Linac 1 is behind the concrete wall. Its beam emerges from the hole near the centre of the picture. A switching magnet directs the beam either to the PS (to the right in the sense of the beam; original injection line), or lets it go straight on to the Booster (originally 800 MeV, now 1.4 GeV). The huge drum in the line to the Booster is a "debuncher", driven by the 200 MHz RF of the linac. It reduces the beam's momentum spread. This was the last year of Linac 1 as provider of protons to the Booster. Linac 2, nearly completed at the time of this picture, took up trial delivery at the end of 1978, and routine delivery in 1979. The beam line from Linac 2, barely visible here, can be clearly seen on 7802260. Linac 1 had a second life as an ion accelerator.

  13. The (7,7) optics at CERN PS

    CERN Document Server

    Serluca, M; Efthymiopoulos, I; Sperati, F; Sterbini, G; Tecker, F; Zisopoulos, P

    2017-01-01

    The PS lattice is composed by one hundred combinedfunction magnets, which set the bare tune of the machineto (Qh,Qv) = (6.25, 6.28). Low energy quadrupoles areused at injection to move the tune in a limited working pointarea. In particular the vertical tune is moved below 6.25 toavoid the structural resonance 8Qv= 50 coupled with spacecharge, which leads to strong losses. In view of the highdemands in terms of beam brightness for LIU and HL-LHCprojects, the interest of exploring different integer tune work-ing area started during last years. During 2016, for the firsttime, it has been possible to explore the (7,7) tune workingarea at injection using the auxiliary circuits of the combinedfunction magnets. A finite-element magnetic model, underdevelopment, has been used to predict the required currentsin order to get the desired optical parameters. In this pa-per we present the results and issues encountered duringthe Machine Development (MD) studies about the injectionin the (7,7) area along with optics and be...

  14. Injection Bump Synchronization Study for the CERN PS

    CERN Document Server

    Serluca, Maurizio; Gilardoni, Simone; CERN. Geneva. ATS Department

    2016-01-01

    In the framework of the LHC Injector Upgrade (LIU) project the CERN PS injection kinetic energy will be upgraded from 1.4 to 2 GeV. The present injection bump is made by four bumpers in Straight Section (SS) 40, 42, 43, 44 and it will be converted in a five bumpers system to allow additional flexibility in the bump shape with a reduction of the proton losses during the bump closure. The injection section SS42 has being redesigned to accommodate a new eddy current septum which will host a new bumper magnet in the same vacuum vessel due to reduced longitudinal space availability. The synchronization and amplitude variation of the power converter of the in-vacuum bumper 42 with respect to the remaining outside vacuum bumpers 40, 41, 43, 44 can lead to orbit distortion and consequent losses during injection. In this note we present the experimental results from Machine Development (MD) studies along with simulations for the present system at 1.4 GeV to quantify the acceptable orbit distortion and the performance ...

  15. Scanning SQUID sampler with 40-ps time resolution

    Science.gov (United States)

    Cui, Zheng; Kirtley, John R.; Wang, Yihua; Kratz, Philip A.; Rosenberg, Aaron J.; Watson, Christopher A.; Gibson, Gerald W.; Ketchen, Mark B.; Moler, Kathryn. A.

    2017-08-01

    Scanning Superconducting QUantum Interference Device (SQUID) microscopy provides valuable information about magnetic properties of materials and devices. The magnetic flux response of the SQUID is often linearized with a flux-locked feedback loop, which limits the response time to microseconds or longer. In this work, we present the design, fabrication, and characterization of a novel scanning SQUID sampler with a 40-ps time resolution and linearized response to periodically triggered signals. Other design features include a micron-scale pickup loop for the detection of local magnetic flux, a field coil to apply a local magnetic field to the sample, and a modulation coil to operate the SQUID sampler in a flux-locked loop to linearize the flux response. The entire sampler device is fabricated on a 2 mm × 2 mm chip and can be scanned over macroscopic planar samples. The flux noise at 4.2 K with 100 kHz repetition rate and 1 s of averaging is of order 1 mΦ0. This SQUID sampler will be useful for imaging dynamics in magnetic and superconducting materials and devices.

  16. The directed differentiation of human iPS cells into kidney podocytes.

    Directory of Open Access Journals (Sweden)

    Bi Song

    Full Text Available The loss of glomerular podocytes is a key event in the progression of chronic kidney disease resulting in proteinuria and declining function. Podocytes are slow cycling cells that are considered terminally differentiated. Here we provide the first report of the directed differentiation of induced pluripotent stem (iPS cells to generate kidney cells with podocyte features. The iPS-derived podocytes share a morphological phenotype analogous with cultured human podocytes. Following 10 days of directed differentiation, iPS podocytes had an up-regulated expression of mRNA and protein localization for podocyte markers including synaptopodin, nephrin and Wilm's tumour protein (WT1, combined with a down-regulation of the stem cell marker OCT3/4. In contrast to human podocytes that become quiescent in culture, iPS-derived cells maintain a proliferative capacity suggestive of a more immature phenotype. The transduction of iPS podocytes with fluorescent labeled-talin that were immunostained with podocin showed a cytoplasmic contractile response to angiotensin II (AII. A permeability assay provided functional evidence of albumin uptake in the cytoplasm of iPS podocytes comparable to human podocytes. Moreover, labeled iPS-derived podocytes were found to integrate into reaggregated metanephric kidney explants where they incorporated into developing glomeruli and co-expressed WT1. This study establishes the differentiation of iPS cells to kidney podocytes that will be useful for screening new treatments, understanding podocyte pathogenesis, and offering possibilities for regenerative medicine.

  17. Emission properties of porphyrin compounds in new polymeric PS:CBP host

    Science.gov (United States)

    Jafari, Mohammad Reza; Bahrami, Bahram

    2015-06-01

    In this study, a device with fundamental structure of ITO/PEDOT:PSS (60 nm)/PS:CBP (70 nm)/Al (150 nm) was fabricated. The electroluminescence spectrum of device designated a red shift rather than PS:CBP photoluminescence spectra. It can be suggested that the electroplex emission occurs at PS:CBP interface. By following this step, red light-emitting devices using porphyrin compounds as a red dopant in a new host material PS:CBP with a configuration of ITO/PEDOT:PSS (60 nm)/PS:CBP:porphyrin compounds(70 nm)/Al (150 nm) have been fabricated and investigated. The electroluminescent spectra of the porphyrin compounds were red-shifted as compared with the PS:CBP blend. OLED devices based on doping 3,4PtTPP and TPPNO2 in PS:CBP showed purer red emission compared with ZnTPP and CoTPP doped devices. We believe that the electroluminescence performance of OLED devices based on porphyrin compounds depends on overlaps between the absorption of the porphyrin compounds and the emission of PS:CBP.

  18. Composite Si/PS membrane pressure sensors with micro and macro ...

    Indian Academy of Sciences (India)

    Porous Silicon (PS) is a versatile material with many unique features making it viable in the field of Microelectromechanical Systems (MEMS). In this paper, we discuss the optimization of formation parameters of micro and macro PS with different porosity and thickness for use in pressure sensors. The optimized material is ...

  19. Sonication-assisted synthesis of polystyrene (PS)/organoclay nanocomposites: influence of clay content

    Science.gov (United States)

    Suresh, Kelothu; Kumar, R. Vinoth; Kumar, Manish; Jeyapriya, M.; Anbarasan, R.; Pugazhenthi, G.

    2017-06-01

    This article presents the synthesis of a series of polystyrene (PS)/organoclay nanocomposite films consisting of different contents of clay (1-7 wt%) by sonication-coupled solvent-blending technique. The prepared PS nanocomposite films were characterized using various techniques, including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and thermal gravimetric analysis (TGA). The XRD and TEM results revealed the formation of exfoliated nanocomposites at lower loading of organoclay (<5 wt%). The presence of various functional groups in the organoclay and PS/organoclay nanocomposite was verified by FTIR spectra. The thermal stability of PS nanocomposites was significantly improved as compared to pristine PS, which is evident from TGA analysis. When 10% mass loss was chosen as a point of reference, the thermal degradation temperature of PS nanocomposite holding 7 wt% of organoclay was found to be 30 °C more over pristine PS. The thermal kinetic parameters such as activation energy ( E a), pre-exponential factor ( A), and the order of reaction ( n) were determined by employing the Coats-Redfern model. Thermal degradation reaction mechanism of PS nanocomposites was also investigated.

  20. [Methionine metabolism regulates maintenance and differentiation of human ES/iPS cells].

    Science.gov (United States)

    Shiraki, Nobuaki; Kume, Shoen

    2015-05-01

    Embryonic stem (ES) and induced pluripotent stem (iPS) cells are pluripotent and can give rise to all cell types. ES/iPS cells have a unique transcriptional circuit that sustains the pluripotent state. These cells also possess a characteristically high rate of proliferation as well as an abbreviated G1 phase. These unique molecular properties distinguish ES and iPS cells from somatic cells. Mouse ES/iPS cells are in a high-flux metabolic state, with a high dependence on threonine catabolism. However, little is known about amino acid metabolism in human ES/iPS cells. Recently, we reported that human ES/iPS cells require high amounts of methionine (Met) and express high levels of Met metabolism enzymes (Shriaki N, et al: Cell Metabolism, 2014). Met deprivation results in a rapid decrease in intracellular S-adenosyl-methionine (SAM), triggering the activation of p53 signaling, reducing pluripotent marker gene NANOG expression, and poising human ES/iPS cells for differentiation, follow by potentiated differentiation into all three germ layers. However, when exposed to prolonged Met deprivation, the cells went to apoptosis. In this review, we explain the importance of SAM in Met metabolism and its relationship with pluripotency, cell survival, and differentiation of human ES/iPS cells.

  1. Effects of hypoxia on pluripotency in murine iPS cells.

    Science.gov (United States)

    Sugimoto, Kouji; Yoshizawa, Yuu; Yamada, Shizuka; Igawa, Kazunari; Hayashi, Yoshihiko; Ishizaki, Hidetaka

    2013-10-01

    Retroviral transduction of four transcription factors (Oct4, Sox2, Klf4 and c-Myc) or three factors, excluding c-Myc, has been shown to initiate a reprogramming process that results in the transformation of murine fibroblasts to induced pluripotent stem (iPS) cells, and there has been a rapid increase in the number of iPS cell-based preclinical trials. In this study, the effects of these transcription factors were evaluated regarding the growth and differentiation of murine iPS cells under hypoxia. Based on the results of RT-PCR and alizarin red S staining, there were no statistical differences in the growth and differentiation of iPS cells or the induction of iPS cells to osteoblasts under hypoxia between the transcription factor groups. Furthermore, the function of hypoxia inducible factors (HIFs) in murine iPS cells under hypoxia was investigated in relation to the morphology and expression of transcription factors using RT-PCR and Western blotting. The HIF-2α knockdown group exhibited a decrease in the colony size of the iPS cells. The HIF-2α or -3α knockdown group demonstrated a statistically significant decrease in the transcription factor expression compared to that observed in the control group. These results demonstrate that HIF-2α among HIFs is the most influential candidate for the maintenance of the pluripotency of murine iPS cells. Copyright © 2013 Wiley Periodicals, Inc.

  2. 7 CFR 1753.37 - Plans and specifications (P&S).

    Science.gov (United States)

    2010-01-01

    ....37 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE... Installation of Central Office Equipment § 1753.37 Plans and specifications (P&S). (a) General. (1) Prior to... central office equipment. (2) The P&S shall specify the delivery and completion time required for each...

  3. Rahuoperatsioonide Keskuses alustab sotsiaalse ja psühholoogilise toetuse sektsioon / Merle Tihaste, Marge Sillaste

    Index Scriptorium Estoniae

    Parmak, Merle, 1968-

    2008-01-01

    Missioonidel osalevatele või pikaajalises lähetuses viibivatele kaitseväelastele ja nende peredele suunatud sotsiaalse ja psühholoogilise toetuse tagamiseks loodud sektsioonist Rahuoperatsioonide Keskuse koosseisus. Sektsiooni töömudelist, ülesannetest ja koostöövõrgustikust. Skeem: Sotsiaalse ja psühholoogilise toetuse sektsiooni töömudel ja partnerid

  4. PS Dreyer: Bakens op die pad van die wetenskap | Antonites | HTS ...

    African Journals Online (AJOL)

    PS Dreyer: Beacons on the path of science. Professor PS Dreyer is an academic who has shovsm insight and vision into several problems of the human sciences since 1951. He has identified problems, but also contributed solutions to them. In this respect his philosophy on causality and freedom is of utmost importance.

  5. Preliminary Evaluation of PS300: A New Self-Lubricating High Temperature Composite Coating for Use to 800 C

    Science.gov (United States)

    Dellacorte, C.; Edmonds, B. J.

    1995-01-01

    This paper introduces PS300, a plasma sprayed, self-lubricating composite coating for use in sliding contacts at temperatures to 800 C. PS300 is a metal bonded chrome oxide coating with silver and BaF2/CaF2 eutectic solid lubricant additives. PS300 is similar to PS200, a chromium carbide based coating, which is currently being investigated for a variety of tribological applications. In pin-on-disk testing up to 650 C, PS300 exhibited comparable friction and wear properties to PS200. The PS300 matrix, which is predominantly chromium oxide rather than chromium carbide, does not require diamond grinding and polishes readily with silicon carbide abrasives greatly reducing manufacturing costs compared to PS200. It is anticipated that PS300 has potential for sliding bearing and seal applications in both aerospace and general industry.

  6. Retinoid Uptake, Processing, and Secretion in Human iPS-RPE Support the Visual Cycle

    Science.gov (United States)

    Muñiz, Alberto; Greene, Whitney A.; Plamper, Mark L.; Choi, Jae Hyek; Johnson, Anthony J.; Tsin, Andrew T.; Wang, Heuy-Ching

    2014-01-01

    Purpose. Retinal pigmented epithelium derived from human induced pluripotent stem (iPS) cells (iPS-RPE) may be a source of cells for transplantation. For this reason, it is essential to determine the functional competence of iPS-RPE. One key role of the RPE is uptake and processing of retinoids via the visual cycle. The purpose of this study is to investigate the expression of visual cycle proteins and the functional ability of the visual cycle in iPS-RPE. Methods. iPS-RPE was derived from human iPS cells. Immunocytochemistry, RT-PCR, and Western blot analysis were used to detect expression of RPE genes lecithin-retinol acyl transferase (LRAT), RPE65, cellular retinaldehyde-binding protein (CRALBP), and pigment epithelium–derived factor (PEDF). All-trans retinol was delivered to cultured cells or whole cell homogenate to assess the ability of the iPS-RPE to process retinoids. Results. Cultured iPS-RPE expresses visual cycle genes LRAT, CRALBP, and RPE65. After incubation with all-trans retinol, iPS-RPE synthesized up to 2942 ± 551 pmol/mg protein all-trans retinyl esters. Inhibition of LRAT with N-ethylmaleimide (NEM) prevented retinyl ester synthesis. Significantly, after incubation with all-trans retinol, iPS-RPE released 188 ± 88 pmol/mg protein 11-cis retinaldehyde into the culture media. Conclusions. iPS-RPE develops classic RPE characteristics and maintains expression of visual cycle proteins. The results of this study confirm that iPS-RPE possesses the machinery to process retinoids for support of visual pigment regeneration. Inhibition of all-trans retinyl ester accumulation by NEM confirms LRAT is active in iPS-RPE. Finally, the detection of 11-cis retinaldehyde in the culture medium demonstrates the cells' ability to process retinoids through the visual cycle. This study demonstrates expression of key visual cycle machinery and complete visual cycle activity in iPS-RPE. PMID:24255038

  7. Retinoid uptake, processing, and secretion in human iPS-RPE support the visual cycle.

    Science.gov (United States)

    Muñiz, Alberto; Greene, Whitney A; Plamper, Mark L; Choi, Jae Hyek; Johnson, Anthony J; Tsin, Andrew T; Wang, Heuy-Ching

    2014-01-09

    Retinal pigmented epithelium derived from human induced pluripotent stem (iPS) cells (iPS-RPE) may be a source of cells for transplantation. For this reason, it is essential to determine the functional competence of iPS-RPE. One key role of the RPE is uptake and processing of retinoids via the visual cycle. The purpose of this study is to investigate the expression of visual cycle proteins and the functional ability of the visual cycle in iPS-RPE. iPS-RPE was derived from human iPS cells. Immunocytochemistry, RT-PCR, and Western blot analysis were used to detect expression of RPE genes lecithin-retinol acyl transferase (LRAT), RPE65, cellular retinaldehyde-binding protein (CRALBP), and pigment epithelium-derived factor (PEDF). All-trans retinol was delivered to cultured cells or whole cell homogenate to assess the ability of the iPS-RPE to process retinoids. Cultured iPS-RPE expresses visual cycle genes LRAT, CRALBP, and RPE65. After incubation with all-trans retinol, iPS-RPE synthesized up to 2942 ± 551 pmol/mg protein all-trans retinyl esters. Inhibition of LRAT with N-ethylmaleimide (NEM) prevented retinyl ester synthesis. Significantly, after incubation with all-trans retinol, iPS-RPE released 188 ± 88 pmol/mg protein 11-cis retinaldehyde into the culture media. iPS-RPE develops classic RPE characteristics and maintains expression of visual cycle proteins. The results of this study confirm that iPS-RPE possesses the machinery to process retinoids for support of visual pigment regeneration. Inhibition of all-trans retinyl ester accumulation by NEM confirms LRAT is active in iPS-RPE. Finally, the detection of 11-cis retinaldehyde in the culture medium demonstrates the cells' ability to process retinoids through the visual cycle. This study demonstrates expression of key visual cycle machinery and complete visual cycle activity in iPS-RPE.

  8. Inhibition of Ps Formation in Benzene and Cyclohexane by CH3CI and CH3Br

    DEFF Research Database (Denmark)

    Wikander, G.; Mogensen, O. E.; Pedersen, Niels Jørgen

    1983-01-01

    Positron-annihilation lifetime spectra have been measured for mixtures of CH3Cl and CH3Br in cyclohexane and of CH3Cl in benzene. The ortho-positronium (Ps) yield decreased monotonically from 38% and 43% in cyclohexane and benzene respectively to 11% in pure CH3Cl and 6% in pure CH3Br. The strength......− anions to form Ps. while it forms a bound state with the halides. X−. CH3Cl was a roughly three times weaker Ps inhibitor in benzene than in cyclohexane, which shows that CH3Cl− does not dechlorinate in times comparable to or shorter than 400–500 ps in benzene. An improved model for the explanation of Ps...

  9. iPS cell technologies: significance and applications to CNS regeneration and disease

    Science.gov (United States)

    2014-01-01

    In 2006, we demonstrated that mature somatic cells can be reprogrammed to a pluripotent state by gene transfer, generating induced pluripotent stem (iPS) cells. Since that time, there has been an enormous increase in interest regarding the application of iPS cell technologies to medical science, in particular for regenerative medicine and human disease modeling. In this review article, we outline the current status of applications of iPS technology to cell therapies (particularly for spinal cord injury), as well as neurological disease-specific iPS cell research (particularly for Parkinson’s disease and Alzheimer’s disease). Finally, future directions of iPS cell research are discussed including a) development of an accurate assay system for disease-associated phenotypes, b) demonstration of causative relationships between genotypes and phenotypes by genome editing, c) application to sporadic and common diseases, and d) application to preemptive medicine. PMID:24685317

  10. Formation of positron-atom bound states in collisions between Rydberg Ps and neutral atoms

    CERN Document Server

    Swann, A R; Deller, A; Gribakin, G F

    2016-01-01

    Predicted twenty years ago, positron binding to neutral atoms has not yet been observed experimentally. A new scheme is proposed to detect positron-atom bound states by colliding Rydberg positronium (Ps) with neutral atoms. Estimates of the charge-transfer-reaction cross section are obtained using the first Born approximation for a selection of neutral atom targets and a wide range of incident Ps energies and principal quantum numbers. We also estimate the corresponding Ps ionization cross section. The accuracy of the calculations is tested by comparison with earlier predictions for Ps charge transfer in collisions with hydrogen and antihydrogen. We describe an existing Rydberg Ps beam suitable for producing positron-atom bound states and estimate signal rates based on the calculated cross sections and realistic experimental parameters. We conclude that the proposed methodology is capable of producing such states and of testing theoretical predictions of their binding energies.

  11. Tribology and Microstructure of PS212 with a Cr2O3 Seal Coat

    Science.gov (United States)

    Sliney, Harold E.; Benoy, Patricia A.; Korenyi-Both, Andras; Dellacorte, Christopher

    1994-01-01

    PS212 is a plasma sprayed metal bonding chrome carbide coating with solid lubricant additives which has lubricating properties at temperatures up to about 900 deg C. The coating is diamond ground to achieve an acceptable tribological surface. But, as with many plasma spray coatings, PS212 is not fully-dense. In this study, a chromium oxide base seal coating is used in an attempt to seal any porosity that is open to the surface of the PS212 coating, and to study the effect of the sealant on the tribological properties of PS212. The results indicate that the seal coating reduces friction and wear when it is applied and then diamond ground leaving a thin layer of seal coating which fills in the surface pits of the PS212 coating.

  12. Intron-exon organization of the active human protein S gene PS. alpha. and its pseudogene PS. beta. : Duplication and silencing during primate evolution

    Energy Technology Data Exchange (ETDEWEB)

    Ploos van Amstel, H.; Reitsma, P.H.; van der Logt, C.P.; Bertina, R.M. (University Hospital, Leiden (Netherlands))

    1990-08-28

    The human protein S locus on chromosome 3 consists of two protein S genes, PS{alpha} and PS{beta}. Here the authors report the cloning and characterization of both genes. Fifteen exons of the PS{alpha} gene were identified that together code for protein S mRNA as derived from the reported protein S cDNAs. Analysis by primer extension of liver protein S mRNA, however, reveals the presence of two mRNA forms that differ in the length of their 5{prime}-noncoding region. Both transcripts contain a 5{prime}-noncoding region longer than found in the protein S cDNAs. The two products may arise from alternative splicing of an additional intron in this region or from the usage of two start sites for transcription. The intron-exon organization of the PS{alpha} gene fully supports the hypothesis that the protein S gene is the product of an evolutional assembling process in which gene modules coding for structural/functional protein units also found in other coagulation proteins have been put upstream of the ancestral gene of a steroid hormone binding protein. The PS{beta} gene is identified as a pseudogene. It contains a large variety of detrimental aberrations, viz., the absence of exon I, a splice site mutation, three stop codons, and a frame shift mutation. Overall the two genes PS{alpha} and PS{beta} show between their exonic sequences 96.5% homology. Southern analysis of primate DNA showed that the duplication of the ancestral protein S gene has occurred after the branching of the orangutan from the African apes. A nonsense mutation that is present in the pseudogene of man also could be identified in one of the two protein S genes of both chimpanzee and gorilla. This implicates that silencing of one of the two protein S genes must have taken place before the divergence of the three African apes.

  13. PS2013 Satellite Workshop on Photosynthetic Light-Harvesting Systems

    Energy Technology Data Exchange (ETDEWEB)

    Niederman, Robert A. [Rutgers Univ., New Brunswick, NJ (United States); Blankenship, Robert E. [Washington Univ., St. Louis, MO (United States); Frank, Harry A. [Univ. of Connecticut, Storrs, CT (United States)

    2015-02-07

    These funds were used for partial support of the PS2013 Satellite Workshop on Photosynthetic Light-Harvesting Systems, that was held on 8-11 August, 2013, at Washington University, St. Louis, MO. This conference, held in conjunction with the 16th International Congress on Photosynthesis/St. Louis, continued a long tradition of light-harvesting satellite conferences that have been held prior to the previous six international photosynthesis congresses. In this Workshop, the basis was explored for the current interest in replacing fossil fuels with energy sources derived form direct solar radiation, coupled with light-driven electron transport in natural photosynthetic systems and how they offer a valuable blueprint for conversion of sunlight to useful energy forms. This was accomplished through sessions on the initial light-harvesting events in the biological conversion of solar energy to chemically stored energy forms, and how these natural photosynthetic processes serve as a guide to the development of robust bio-hybrid and artificial systems for solar energy conversion into both electricity or chemical fuels. Organized similar to a Gordon Research Conference, a lively, informal and collegial setting was established, highlighting the exchange of exciting new data and unpublished results from ongoing studies. A significant amount of time was set aside for open discussion and interactive poster sessions, with a special session devoted to oral presentations by talented students and postdoctoral fellows judged to have the best posters. This area of research has seen exceptionally rapid progress in recent years, with the availability of a number of antenna protein structures at atomic resolution, elucidation of the molecular surface architecture of native photosynthetic membranes by atomic force microscopy and the maturing of ultrafast spectroscopic and molecular biological techniques for the investigation and manipulation of photosynthetic systems. The conferees

  14. Design and Fabrication of Nano-Bio Materials for Sensor and Device Applications

    OpenAIRE

    Choi, Duyoung

    2015-01-01

    In this thesis, various aspects of nano-bio materials have been discussed including novel design, fabrication and applications of nanopatterned graphene for sensor and device by using self-assembly techniques. First, we demonstrate a successful fabrication of nano-patterned graphene (NPG) using a Poly(styrene-b-4-vinylpyridine) (PS -b-P4VP) polymer, which was never used previously for the graphene patterning. This work also demonstrates that block copolymer (BCP) lithography is a pathway for ...

  15. An HDAC2-TET1 switch at distinct chromatin regions significantly promotes the maturation of pre-iPS to iPS cells.

    Science.gov (United States)

    Wei, Tingyi; Chen, Wen; Wang, Xiukun; Zhang, Man; Chen, Jiayu; Zhu, Songcheng; Chen, Long; Yang, Dandan; Wang, Guiying; Jia, Wenwen; Yu, Yangyang; Duan, Tao; Wu, Minjuan; Liu, Houqi; Gao, Shaorong; Kang, Jiuhong

    2015-06-23

    The maturation of induced pluripotent stem cells (iPS) is one of the limiting steps of somatic cell reprogramming, but the underlying mechanism is largely unknown. Here, we reported that knockdown of histone deacetylase 2 (HDAC2) specifically promoted the maturation of iPS cells. Further studies showed that HDAC2 knockdown significantly increased histone acetylation, facilitated TET1 binding and DNA demethylation at the promoters of iPS cell maturation-related genes during the transition of pre-iPS cells to a fully reprogrammed state. We also found that HDAC2 competed with TET1 in the binding of the RbAp46 protein at the promoters of maturation genes and knockdown of TET1 markedly prevented the activation of these genes. Collectively, our data not only demonstrated a novel intrinsic mechanism that the HDAC2-TET1 switch critically regulates iPS cell maturation, but also revealed an underlying mechanism of the interplay between histone acetylation and DNA demethylation in gene regulation. © The Author(s) 2015. Published by Oxford University Press on behalf of Nucleic Acids Research.

  16. Early temporal short-term memory deficits in double transgenic APP/PS1 mice.

    Science.gov (United States)

    Lagadec, Saioa; Rotureau, Lolita; Hémar, Agnès; Macrez, Nathalie; Delcasso, Sebastien; Jeantet, Yannick; Cho, Yoon H

    2012-01-01

    We tested single APP (Tg2576) transgenic, PS1 (PS1dE9) transgenic, and double APP/PS1 transgenic mice at 3 and 6 months of age on the acquisition of a hippocampal-dependent operant "differential reinforcement of low rate schedule" (DRL) paradigm. In this task mice are required to wait for at least 10 seconds (DRL-10s) between 2 consecutive nose poke responses. Our data showed that while single APP and PS1 transgene expression did not affect DRL learning and performance, mice expressing double APP/PS1 transgenes were impaired in the acquisition of DRL-10s at 6 months, but not at 3 months of age. The same impaired double transgenic mice, however, were perfectly capable of normal acquisition of signaled DRL-10s (SDRL-10s) task, a hippocampal-independent task, wherein mice were required to emit responses when the end of the 10-second delay was signaled by a lighting of the chamber. The age-dependent and early deficits of APP/PS1 mice suggest that the appetitive DRL paradigm is sensitive to the amyloid pathology present in double APP/PS1 mice, and that this mouse line represents a good model with which to study the efficacy of therapeutic strategies against Alzheimer's disease. Copyright © 2012 Elsevier Inc. All rights reserved.

  17. Reprogramming in vivo produces teratomas and iPS cells with totipotency features.

    Science.gov (United States)

    Abad, María; Mosteiro, Lluc; Pantoja, Cristina; Cañamero, Marta; Rayon, Teresa; Ors, Inmaculada; Graña, Osvaldo; Megías, Diego; Domínguez, Orlando; Martínez, Dolores; Manzanares, Miguel; Ortega, Sagrario; Serrano, Manuel

    2013-10-17

    Reprogramming of adult cells to generate induced pluripotent stem cells (iPS cells) has opened new therapeutic opportunities; however, little is known about the possibility of in vivo reprogramming within tissues. Here we show that transitory induction of the four factors Oct4, Sox2, Klf4 and c-Myc in mice results in teratomas emerging from multiple organs, implying that full reprogramming can occur in vivo. Analyses of the stomach, intestine, pancreas and kidney reveal groups of dedifferentiated cells that express the pluripotency marker NANOG, indicative of in situ reprogramming. By bone marrow transplantation, we demonstrate that haematopoietic cells can also be reprogrammed in vivo. Notably, reprogrammable mice present circulating iPS cells in the blood and, at the transcriptome level, these in vivo generated iPS cells are closer to embryonic stem cells (ES cells) than standard in vitro generated iPS cells. Moreover, in vivo iPS cells efficiently contribute to the trophectoderm lineage, suggesting that they achieve a more plastic or primitive state than ES cells. Finally, intraperitoneal injection of in vivo iPS cells generates embryo-like structures that express embryonic and extraembryonic markers. We conclude that reprogramming in vivo is feasible and confers totipotency features absent in standard iPS or ES cells. These discoveries could be relevant for future applications of reprogramming in regenerative medicine.

  18. Integration-Free iPS Cells Engineered Using Human Artificial Chromosome Vectors

    Science.gov (United States)

    Hiratsuka, Masaharu; Uno, Narumi; Ueda, Kana; Kurosaki, Hajime; Imaoka, Natsuko; Kazuki, Kanako; Ueno, Etsuya; Akakura, Yutaro; Katoh, Motonobu; Osaki, Mitsuhiko; Kazuki, Yasuhiro; Nakagawa, Masato; Yamanaka, Shinya; Oshimura, Mitsuo

    2011-01-01

    Human artificial chromosomes (HACs) have unique characteristics as gene-delivery vectors, including episomal transmission and transfer of multiple, large transgenes. Here, we demonstrate the advantages of HAC vectors for reprogramming mouse embryonic fibroblasts (MEFs) into induced pluripotent stem (iPS) cells. Two HAC vectors (iHAC1 and iHAC2) were constructed. Both carried four reprogramming factors, and iHAC2 also encoded a p53-knockdown cassette. iHAC1 partially reprogrammed MEFs, and iHAC2 efficiently reprogrammed MEFs. Global gene expression patterns showed that the iHACs, unlike other vectors, generated relatively uniform iPS cells. Under non-selecting conditions, we established iHAC-free iPS cells by isolating cells that spontaneously lost iHAC2. Analyses of pluripotent markers, teratomas and chimeras confirmed that these iHAC-free iPS cells were pluripotent. Moreover, iHAC-free iPS cells with a re-introduced HAC encoding Herpes Simplex virus thymidine kinase were eliminated by ganciclovir treatment, indicating that the HAC safeguard system functioned in iPS cells. Thus, the HAC vector could generate uniform, integration-free iPS cells with a built-in safeguard system. PMID:21998730

  19. Inhibition of the integrin signal constitutes a mouse iPS cell niche.

    Science.gov (United States)

    Higuchi, Sayaka; Yoshina, Sawako; Mitani, Shohei

    2016-09-01

    Stem cells are regulated by their surrounding microenvironments, called niche, such as cell-cell interaction and extracellular matrix. Classically, feeder cells as a niche have been used in the culture of iPS cells from both the mouse and the human. However, the regulation mechanism of stem cells by feeder cells as a niche still have been partially unclear. In this study, we used three murine iPS cell lines, iPS-MEF-Ng-20D-17, iPS-MEF-Ng-178B-5 and iPS-MEF-Fb/Ng-440A-3, which were generated by different reprogramming methods. In general, these cell lines commonly need the feeder cells as a niche to culture. Recently, the effect of substrate stiffness is known in stem cell study. First, we focused on the mechanical properties of feeder cells, and then we speculated that feeder-less culture might be made possible by using molecules in place of the mechanical properties of the niche. Finally, we found that the combination of disintegrin (echistatin) and 2i (GSK3 inhibitor and MEK inhibitor) is a sufficient condition for three murine iPS culture. This novel method of mimicking the murine iPS cell niche may be useful to understand signaling pathways to maintain the pluripotency of stem cells. © 2016 The Authors. Development, Growth & Differentiation published by John Wiley & Sons Australia, Ltd on behalf of Japanese Society of Developmental Biologists.

  20. [Effects of Different Culture Systems on the Hematopoietic Differentiation Ability of iPS Cells].

    Science.gov (United States)

    Fan, Di; He, Wen-Yin; Niu, Xiao-Hua; Ou, Zhan-Hui; Chen, Yu-Chang; Sun, Xiao-Fang

    2016-12-01

    To investigate the in vitro effects of different culture systems on hematopoietic differentiation ability of induced pluripotent stem (iPS) cells. Two culture systems including E8 and mTESR(freeder-free medium), and the classical ES culture medium were chosen for culture of iPS cells. The iPS cells maintaining in above mentioning culcure systems were co-cultured with OP9 cells(murine bone marrow stromal cells) in vitro to be induced to differentiate into hematopoietic stem/progenitor cells. Flow cytometry and real-time quantitative PCR were used to detect the expression of specific hematopoietic markers and the effects of different culture systems on the differentiation of iPS in vitro. iPS cultured in the 3 selected medium could be differentiated into hematopoietic stem cells. Efficiency of hematopoietic differentiation was up to 28.4% in classical ES culture system, which was significantly higher than that in E8 and mTESR system. Under the co-culture with OP9, iPS can differentiate into hematopoietic stem/progenitor cells, which shows higher efficiency when iPS maintained in the ES medium.

  1. A family of small cyclic amphipathic peptides (SCAmpPs) genes in citrus.

    Science.gov (United States)

    Belknap, William R; McCue, Kent F; Harden, Leslie A; Vensel, William H; Bausher, Michael G; Stover, Ed

    2015-04-16

    Citrus represents a crop of global importance both in economic impact and significance to nutrition. Citrus production worldwide is threatened by the disease Huanglongbing (HLB), caused by the phloem-limited pathogen Candidatus Liberibacter spp.. As a source of stable HLB-resistance has yet to be identified, there is considerable interest in characterization of novel disease-associated citrus genes. A gene family of Small Cyclic Amphipathic Peptides (SCAmpPs) in citrus is described. The citrus genomes contain 100-150 SCAmpPs genes, approximately 50 of which are represented in the citrus EST database. These genes encode small ~50 residue precursor proteins that are post-translationally processed, releasing 5-10 residue cyclic peptides. The structures of the SCAmpPs genes are highly conserved, with the small coding domains interrupted by a single intron and relatively extended untranslated regions. Some family members are very highly transcribed in specific citrus tissues, as determined by representation in tissue-specific cDNA libraries. Comparison of the ESTs of related SCAmpPs revealed an unexpected evolutionary profile, consistent with targeted mutagenesis of the predicted cyclic peptide domain. The SCAmpPs genes are displayed in clusters on the citrus chromosomes, with apparent association with receptor leucine-rich repeat protein arrays. This study focused on three SCAmpPs family members with high constitutive expression in citrus phloem. Unexpectedly high sequence conservation was observed in the promoter region of two phloem-expressed SCAmpPs that encode very distinct predicted cyclic products. The processed cyclic product of one of these phloem SCAmpPs was characterized by LC-MS-MS analysis of phloem tissue, revealing properties consistent with a K(+) ionophore. The SCAmpPs amino acid composition, protein structure, expression patterns, evolutionary profile and chromosomal distribution are consistent with designation as ribosomally synthesized defense

  2. Delayed amyloid plaque deposition and behavioral deficits in outcrossed AβPP/PS1 mice.

    Science.gov (United States)

    Couch, Brian A; Kerrisk, Meghan E; Kaufman, Adam C; Nygaard, Haakon B; Strittmatter, Stephen M; Koleske, Anthony J

    2013-04-15

    Alzheimer's disease (AD) is a progressive neurodegenerative dementia characterized by amyloid plaque accumulation, synapse/dendrite loss, and cognitive impairment. Transgenic mice expressing mutant forms of amyloid-β precursor protein (AβPP) and presenilin-1 (PS1) recapitulate several aspects of this disease and provide a useful model system for studying elements of AD progression. AβPP/PS1 mice have been previously shown to exhibit behavioral deficits and amyloid plaque deposition between 4-9 months of age. We crossed AβPP/PS1 animals with mice of a mixed genetic background (C57BL/6 × 129/SvJ) and investigated the development of AD-like features in the resulting outcrossed mice. The onset of memory-based behavioral impairment is delayed considerably in outcrossed AβPP/PS1 mice relative to inbred mice on a C57BL/6 background. While inbred AβPP/PS1 mice develop deficits in radial-arm water maze performance and novel object recognition as early as 8 months, outcrossed AβPP/PS1 mice do not display defects until 18 months. Within the forebrain, we find that inbred AβPP/PS1 mice have significantly higher amyloid plaque burden at 12 months than outcrossed AβPP/PS1 mice of the same age. Surprisingly, inbred AβPP/PS1 mice at 8 months have low plaque burden, suggesting that plaque burden alone cannot explain the accompanying behavioral deficits. Analysis of AβPP processing revealed that elevated levels of soluble Aβ correlate with the degree of behavioral impairment in both strains. Taken together, these findings suggest that animal behavior, amyloid plaque deposition, and AβPP processing are sensitive to genetic differences between mouse strains. Copyright © 2012 Wiley Periodicals, Inc.

  3. Psühholoog Parmak: missioonide vahel peaks sõdur aasta puhkama / Merle Parmak ; intervjueerinud Kadri Ibrus

    Index Scriptorium Estoniae

    Parmak, Merle, 1968-

    2009-01-01

    Intervjuu kaitseväe ühendatud õppeasutuste rakendusuuringute keskuse psühholoogiga sõdurite psühholoogilise nõustamise praegusest olukorrast, posttraumaatilisest stressist, missioonidevahelise puhkeperioodi vajalikkusest

  4. Investigation of the pathogenesis of autoimmune diseases by iPS cells.

    Science.gov (United States)

    Natsumoto, Bunki; Shoda, Hirofumi; Fujio, Keishi; Otsu, Makoto; Yamamoto, Kazuhiko

    2017-01-01

    The pluripotent stem cells have a self-renewal ability and can be differentiated into theoretically all of cell types. The induced pluripotent stem (iPS) cells overcame the ethical problems of the human embryonic stem (ES) cell, and enable pathologic analysis of intractable diseases and drug discovery. The in vitro disease model using disease-specific iPS cells enables repeated analyses of human cells without influence of environment factors. Even though autoimmune diseases are polygenic diseases, autoimmune disease-specific iPS cells are thought to be a promising tool for analyzing the pathogenesis of the diseases and drug discovery in future.

  5. File list: DNS.PSC.10.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.10.AllAg.iPS_derived_fibroblasts hg19 DNase-seq Pluripotent stem cell iPS derived... fibroblasts http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/DNS.PSC.10.AllAg.iPS_derived_fibroblasts.bed ...

  6. File list: NoD.PSC.05.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.05.AllAg.iPS_derived_fibroblasts hg19 No description Pluripotent stem cell iPS derived... fibroblasts http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/NoD.PSC.05.AllAg.iPS_derived_fibroblasts.bed ...

  7. File list: InP.PSC.10.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.10.AllAg.iPS_derived_neural_cells hg19 Input control Pluripotent stem cell iPS derived... neural cells SRX702550 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.PSC.10.AllAg.iPS_derived_neural_cells.bed ...

  8. File list: Pol.PSC.20.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.20.AllAg.iPS_derived_fibroblasts hg19 RNA polymerase Pluripotent stem cell iPS derived... fibroblasts http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Pol.PSC.20.AllAg.iPS_derived_fibroblasts.bed ...

  9. File list: NoD.PSC.50.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.50.AllAg.iPS_derived_neural_cells hg19 No description Pluripotent stem cell iPS derived... neural cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/NoD.PSC.50.AllAg.iPS_derived_neural_cells.bed ...

  10. File list: DNS.PSC.05.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.05.AllAg.iPS_derived_fibroblasts hg19 DNase-seq Pluripotent stem cell iPS derived... fibroblasts http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/DNS.PSC.05.AllAg.iPS_derived_fibroblasts.bed ...

  11. File list: Pol.PSC.20.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.20.AllAg.iPS_derived_neural_cells hg19 RNA polymerase Pluripotent stem cell iPS derived... neural cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Pol.PSC.20.AllAg.iPS_derived_neural_cells.bed ...

  12. File list: Pol.PSC.50.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.50.AllAg.iPS_derived_fibroblasts hg19 RNA polymerase Pluripotent stem cell iPS derived... fibroblasts http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Pol.PSC.50.AllAg.iPS_derived_fibroblasts.bed ...

  13. File list: InP.PSC.20.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.20.AllAg.iPS_derived_neural_cells hg19 Input control Pluripotent stem cell iPS derived... neural cells SRX702550 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.PSC.20.AllAg.iPS_derived_neural_cells.bed ...

  14. File list: Oth.PSC.10.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.AllAg.iPS_derived_neural_cells hg19 TFs and others Pluripotent stem cell iPS derived...X968910 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.10.AllAg.iPS_derived_neural_cells.bed ...

  15. File list: ALL.PSC.10.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.10.AllAg.iPS_derived_fibroblasts hg19 All antigens Pluripotent stem cell iPS derived...4,SRX1099982,SRX1099970,SRX1099965,SRX1099961,SRX1099958,SRX1099949 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/ALL.PSC.10.AllAg.iPS_derived_fibroblasts.bed ...

  16. File list: DNS.PSC.20.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.20.AllAg.iPS_derived_neural_cells hg19 DNase-seq Pluripotent stem cell iPS derived... neural cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/DNS.PSC.20.AllAg.iPS_derived_neural_cells.bed ...

  17. File list: NoD.PSC.05.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.05.AllAg.iPS_derived_neural_cells hg19 No description Pluripotent stem cell iPS derived neural... cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/NoD.PSC.05.AllAg.iPS_derived_neural_cells.bed ...

  18. File list: His.PSC.50.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.50.AllAg.iPS_derived_neural_cells hg19 Histone Pluripotent stem cell iPS derived neural...archive.biosciencedbc.jp/kyushu-u/hg19/assembled/His.PSC.50.AllAg.iPS_derived_neural_cells.bed ...

  19. File list: DNS.PSC.10.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.10.AllAg.iPS_derived_neural_cells hg19 DNase-seq Pluripotent stem cell iPS derived neural... cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/DNS.PSC.10.AllAg.iPS_derived_neural_cells.bed ...

  20. File list: ALL.PSC.10.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.10.AllAg.iPS_derived_neural_cells hg19 All antigens Pluripotent stem cell iPS derived neural...hive.biosciencedbc.jp/kyushu-u/hg19/assembled/ALL.PSC.10.AllAg.iPS_derived_neural_cells.bed ...

  1. File list: Unc.PSC.10.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.10.AllAg.iPS_derived_neural_cells hg19 Unclassified Pluripotent stem cell iPS derived neural... cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Unc.PSC.10.AllAg.iPS_derived_neural_cells.bed ...

  2. File list: DNS.PSC.05.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available DNS.PSC.05.AllAg.iPS_derived_neural_cells hg19 DNase-seq Pluripotent stem cell iPS derived neural... cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/DNS.PSC.05.AllAg.iPS_derived_neural_cells.bed ...

  3. File list: Unc.PSC.20.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.20.AllAg.iPS_derived_neural_cells hg19 Unclassified Pluripotent stem cell iPS derived neural... cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Unc.PSC.20.AllAg.iPS_derived_neural_cells.bed ...

  4. File list: Oth.PSC.05.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.05.AllAg.iPS_derived_neural_cells hg19 TFs and others Pluripotent stem cell iPS derived neural...X968908 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.05.AllAg.iPS_derived_neural_cells.bed ...

  5. File list: His.PSC.20.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.20.AllAg.iPS_derived_neural_cells hg19 Histone Pluripotent stem cell iPS derived neural...archive.biosciencedbc.jp/kyushu-u/hg19/assembled/His.PSC.20.AllAg.iPS_derived_neural_cells.bed ...

  6. File list: ALL.PSC.50.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.50.AllAg.iPS_derived_fibroblasts hg19 All antigens Pluripotent stem cell iPS...8,SRX1099970,SRX1099949,SRX1099977,SRX1099965,SRX1099969,SRX1099955 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/ALL.PSC.50.AllAg.iPS_derived_fibroblasts.bed ...

  7. File list: His.PSC.10.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.10.AllAg.iPS_derived_fibroblasts hg19 Histone Pluripotent stem cell iPS der...ived fibroblasts http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/His.PSC.10.AllAg.iPS_derived_fibroblasts.bed ...

  8. File list: InP.PSC.05.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.05.AllAg.iPS_derived_fibroblasts hg19 Input control Pluripotent stem cell iPS... derived fibroblasts http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.PSC.05.AllAg.iPS_derived_fibroblasts.bed ...

  9. File list: Unc.PSC.05.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.05.AllAg.iPS_derived_fibroblasts hg19 Unclassified Pluripotent stem cell iPS...1,SRX1099989,SRX1099969,SRX1099949,SRX1099955,SRX1099970,SRX1099965 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Unc.PSC.05.AllAg.iPS_derived_fibroblasts.bed ...

  10. File list: ALL.PSC.20.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.20.AllAg.iPS_derived_fibroblasts hg19 All antigens Pluripotent stem cell iPS...2,SRX1099961,SRX1099958,SRX1099970,SRX1099949,SRX1099977,SRX1099965 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/ALL.PSC.20.AllAg.iPS_derived_fibroblasts.bed ...

  11. File list: Pol.PSC.10.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.10.AllAg.iPS_derived_fibroblasts hg19 RNA polymerase Pluripotent stem cell iPS... derived fibroblasts http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Pol.PSC.10.AllAg.iPS_derived_fibroblasts.bed ...

  12. File list: Oth.PSC.20.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.20.AllAg.iPS_derived_fibroblasts hg19 TFs and others Pluripotent stem cell iPS... derived fibroblasts http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.20.AllAg.iPS_derived_fibroblasts.bed ...

  13. File list: Unc.PSC.50.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.50.AllAg.iPS_derived_fibroblasts hg19 Unclassified Pluripotent stem cell iPS...8,SRX1099970,SRX1099949,SRX1099977,SRX1099965,SRX1099969,SRX1099955 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Unc.PSC.50.AllAg.iPS_derived_fibroblasts.bed ...

  14. File list: Oth.PSC.10.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.10.AllAg.iPS_derived_fibroblasts hg19 TFs and others Pluripotent stem cell iPS... derived fibroblasts http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.10.AllAg.iPS_derived_fibroblasts.bed ...

  15. File list: InP.PSC.10.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.10.AllAg.iPS_derived_fibroblasts hg19 Input control Pluripotent stem cell iPS... derived fibroblasts http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.PSC.10.AllAg.iPS_derived_fibroblasts.bed ...

  16. File list: His.PSC.05.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.05.AllAg.iPS_derived_fibroblasts hg19 Histone Pluripotent stem cell iPS der...ived fibroblasts http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/His.PSC.05.AllAg.iPS_derived_fibroblasts.bed ...

  17. File list: His.PSC.20.AllAg.iPS_derived_fibroblasts [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available His.PSC.20.AllAg.iPS_derived_fibroblasts hg19 Histone Pluripotent stem cell iPS der...ived fibroblasts http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/His.PSC.20.AllAg.iPS_derived_fibroblasts.bed ...

  18. File list: ALL.PSC.20.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.20.AllAg.iPS_derived_neural_cells hg19 All antigens Pluripotent stem cell iPS derived neural...hive.biosciencedbc.jp/kyushu-u/hg19/assembled/ALL.PSC.20.AllAg.iPS_derived_neural_cells.bed ...

  19. File list: Unc.PSC.50.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.50.AllAg.iPS_derived_neural_cells hg19 Unclassified Pluripotent stem cell iPS derived neural... cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Unc.PSC.50.AllAg.iPS_derived_neural_cells.bed ...

  20. File list: Oth.PSC.50.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Oth.PSC.50.AllAg.iPS_derived_neural_cells hg19 TFs and others Pluripotent stem cell iPS derived neural...X968908 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Oth.PSC.50.AllAg.iPS_derived_neural_cells.bed ...

  1. File list: InP.PSC.05.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available InP.PSC.05.AllAg.iPS_derived_neural_cells hg19 Input control Pluripotent stem cell iPS derived neural... cells SRX702550 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.PSC.05.AllAg.iPS_derived_neural_cells.bed ...

  2. File list: Pol.PSC.05.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.05.AllAg.iPS_derived_neural_cells hg19 RNA polymerase Pluripotent stem cell iPS derived neural... cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Pol.PSC.05.AllAg.iPS_derived_neural_cells.bed ...

  3. File list: ALL.PSC.50.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available ALL.PSC.50.AllAg.iPS_derived_neural_cells hg19 All antigens Pluripotent stem cell iPS derived neural...hive.biosciencedbc.jp/kyushu-u/hg19/assembled/ALL.PSC.50.AllAg.iPS_derived_neural_cells.bed ...

  4. File list: NoD.PSC.10.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available NoD.PSC.10.AllAg.iPS_derived_neural_cells hg19 No description Pluripotent stem cell iPS derived neural... cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/NoD.PSC.10.AllAg.iPS_derived_neural_cells.bed ...

  5. File list: Unc.PSC.05.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Unc.PSC.05.AllAg.iPS_derived_neural_cells hg19 Unclassified Pluripotent stem cell iPS derived neural... cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Unc.PSC.05.AllAg.iPS_derived_neural_cells.bed ...

  6. File list: Pol.PSC.10.AllAg.iPS_derived_neural_cells [Chip-atlas[Archive

    Lifescience Database Archive (English)

    Full Text Available Pol.PSC.10.AllAg.iPS_derived_neural_cells hg19 RNA polymerase Pluripotent stem cell iPS derived neural... cells http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/Pol.PSC.10.AllAg.iPS_derived_neural_cells.bed ...

  7. Facile synthesis of thick films of poly(methyl methacrylate), poly(styrene), and poly(vinyl pyridine) from Au surfaces.

    Science.gov (United States)

    Saha, Sampa; Bruening, Merlin L; Baker, Gregory L

    2011-08-01

    Atom transfer radical polymerization (ATRP) is commonly used to grow polymer brushes from Au surfaces, but the resulting film thicknesses are usually significantly less than with ATRP from SiO(2) substrates. On Au, growth of poly(methyl methacrylate) (PMMA) blocks from poly(tert-butyl acrylate) brushes occurs more rapidly than growth of PMMA from initiator monolayers, suggesting that the disparity between growth rates from Au and SiO(2) stems from the Au surface. Radical quenching by electron transfer from Au is probably not the termination mechanism because polymerization from thin, cross-linked initiators gives film thicknesses that are essentially the same as the thicknesses of films grown from SiO(2) under the same polymerization conditions. However, this result is consistent with termination through desorption of thiols from noncross-linked films, and reaction of these thiols with growing polymer chains. The enhanced stability of cross-linked initiators allows ATRP at temperatures up to ∼100 °C and enables the growth of thick films of PMMA (350 nm), polystyrene (120 nm) and poly(vinyl pyridine) (200 nm) from Au surfaces in 1 h. At temperatures >100 °C, the polymer brush layers delaminate as large area films.

  8. PREPARATION OF BLOCK COPOLYMERS OF POLY(STYRENE) AND POLY(T-BUTYL ACRYLATE) OF VARIOUS MOLECULAR WEIGHTS AND ARCHITECTURES BY ATOM TRANSFER RADICAL POLYMERIZATION. (R826735)

    Science.gov (United States)

    Block copolymers of polystyrene and poly(t-butyl acrylate) were prepared using atom transfer radical polymerization techniques. These polymers were synthesized with a CuBr/N,N,N,NNew dual-phase polymer electrolytes prepared from NBR/SBR lattices. [polyacryloNitrile-Butadiene Rubber/poly(Styrene-Butadiene) copolymer Rubber

    Energy Technology Data Exchange (ETDEWEB)

    Matsumoto, Morihiko; Ichino, Toshihiro; Rutt, J.S.; Nishi, Shiro (Nippon Telegraph and Telephone Corp., Tokyo (Japan). NTT Interdisciplinary Research Lab.)

    1993-10-01

    A new type of Li[sup +] ion conducting polymer electrolytes consisting of two phases, one of which is a highly polar region (impregnated with lithium salt solution), forming ion-conductive channels, while the other is a nonpolar region, forming supporting polymer matrices have been prepared from NBR/SBR lattices. TEM measurement and EDX analysis show evidence that dual-phase structure is constructed in the electrolyte. Ionic conductivity of the electrolyte increases with increase of lithium salt solution content. Maximum ionic conductivity of 2.2 [times] 10[sup [minus]3] S/cm is obtained at the lithium salt solution content of 60.5% (w/w). The electrolyte retains rubber-like film with good mechanical strength despite the presence of the solution.

  9. Synthesis and Characterization of Poly (styrene-co-butyl acrylate)/Silica Aerogel Nanocomposites by in situ AGET ATRP: Investigating Thermal Properties

    Science.gov (United States)

    Khezri, Khezrollah; Fazli, Yousef

    2017-10-01

    Hydrophilic silica aerogel nanoparticles surface was modified with hexamethyldisilazane. Then, the resultant modified nanoparticles were used in random copolymerization of styrene and butyl acrylate via activators generated by electron transfer for atom transfer radical polymerization. Conversion and molecular weight determinations were performed using gas and size exclusion chromatography respectively. Addition of modified nanoparticles by 3 wt% results in a decrease of conversion from 68 to 46 %. Molecular weight of copolymer chains decreases from 12,500 to 7,500 g.mol-1 by addition of 3 wt% modified nanoparticles; however, PDI values increase from 1.1 to 1.4. Proton nuclear magnetic resonance spectroscopy results indicate that the molar ratio of each monomer in the copolymer chains is approximately similar to the initial selected mole ratio of them. Increasing thermal stability of the nanocomposites is demonstrated by thermal gravimetric analysis. Differential scanning calorimetry also shows a decrease in glass transition temperature by increasing modified silica aerogel nanoparticles.

  10. Systematic investigation of the synthesis of core-shell poly(styrene-co-acrylic acid) colloids with varying shell thickness and core diameter

    DEFF Research Database (Denmark)

    Hinge, Mogens; Keiding, Kristian

    2006-01-01

    by titration, dynamic light scattering (DLS), scanning electron microscopy (SEM) and transition electron microscopy (TEM).   The acrylic acid was fully incorporated into the poly(ST-co-AA) colloids in blocks and/or clusters and the purified poly(ST-co-AA) colloids swelled when pH was changed from low (4......) to high (10). There was a linear correlation between the incorporated amount of acrylic acid and the swelling for the purified poly(ST-co-AA) colloids. The swelling is thus ascribed to ionization of poly(acrylic acid). Samples were taken during synthesis and the fractional conversion and size...

  11. Surface modification of poly (styrene-b-(ethylene-co-butylene)-b-styrene) elastomer and its plasma protein adsorption by QCM-D

    Energy Technology Data Exchange (ETDEWEB)

    Li, Rui [Northeast Normal University, School of Physics, Changchun 130022 (China); Jin, Jing, E-mail: jjin@ciac.ac.cn [State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China); Sun, Yingchun, E-mail: sunyc149@nenu.edu.cn [Northeast Normal University, School of Physics, Changchun 130022 (China)

    2014-05-01

    Graphical abstract: - Highlights: • Grafting concentration of PEG was defined by the peak-area ratio of [C–O]/[C]. • Quantitatively investigated the adsorption processes of BSA and fibrinogen using QCM-D. • The inactivated BSA on SEBS surface could induce the subsequent fibrinogen adsorption. • SEBS-g-PEG with graft concentration of 0.207 has excellent protein resistance. - Abstract: Protein adsorption is a dynamic process and plays a major role in determining the hemocompatibility of biomaterials. We have obtained different poly (ethylene glycol) (PEG) graft concentrations of SEBS-g-PEG and the surface chemical compositions are confirmed by X-ray photoelectron spectroscopy (XPS). Graft concentration is defined by peak-area ratio of [C-O]/[C] on modified SEBS surface. With increasing graft concentration, water contact angles of the modified SEBS have significantly decreased. The platelet adhesion and static protein adsorption demonstrate that the hemocompatibility of copolymers films are improved effectively and SEBS-g-PEG-2 with larger graft concentration has more superior anticoagulation than that of SEBS-g-PEG-1. Moreover, we have quantitatively investigated the adsorption process of bovine serum albumin (BSA) and fibrinogen (Fib) on the surfaces of pristine SEBS and modified SEBS using quartz crystal microbalance with dissipation (QCM-D) in real time. The results indicate that the inactivated BSA on the pristine SEBS can continuously induce the subsequent Fib adsorption. The hemocompatibility of SEBS-g-PEG-2 with the graft concentration of 0.207 has excellent anti-protein property and the bio-inert BSA layer on the film can resist the subsequent Fib adsorption.

  12. Normal Amplitude of Electroretinography and Visual Evoked Potential Responses in AβPP/PS1 Mice.

    Science.gov (United States)

    Leinonen, Henri; Lipponen, Arto; Gurevicius, Kestutis; Tanila, Heikki

    2016-01-01

    Alzheimer's disease has been shown to affect vision in human patients and animal models. This may pose the risk of bias in behavior studies and therefore requires comprehensive investigation. We recorded electroretinography (ERG) under isoflurane anesthesia and visual evoked potentials (VEP) in awake amyloid expressing AβPPswe/PS1dE9 (AβPP/PS1) and wild-type littermate mice at a symptomatic age. The VEPs in response to patterned stimuli were normal in AβPP/PS1 mice. They also showed normal ERG amplitude but slightly shortened ERG latency in dark-adapted conditions. Our results indicate subtle changes in visual processing in aged male AβPP/PS1 mice specifically at a retinal level.

  13. Velocity-independent layer stripping of PP and PS reflection traveltimes

    Digital Repository Service at National Institute of Oceanography (India)

    Dewangan, P.; Tsvankin, I.

    Building accurate interval velocity models is critically important for seismic imaging and AVO (amplitude variation with offset) analysis. Here, we adapt the PP + PS = SS method to develop an exact technique for constructing the interval traveltime...

  14. 7 CFR 1753.26 - Plans and specifications (P&S).

    Science.gov (United States)

    2010-01-01

    ... Buildings § 1753.26 Plans and specifications (P&S). (a) For headquarters and commercial office buildings... workmanship. (3) A detailed building plan. Where the building is to house electronic apparatus, the detailed...

  15. Psühhofüsioloogilised mängud / Kaivo Thomson

    Index Scriptorium Estoniae

    Thomson, Kaivo, 1956-

    2002-01-01

    Rmt.: Thomson, Kaivo. Psühhofüsioloogilised mängud : teooria & värvitoonide, helikõrguste ja liikumiskiiruste eristamisvõime testimine ning arendamine meetodiga "WinPsycho 2000" (CD-1). Tartu : Atlex, 2001.

  16. 1000-V, 300-ps pulse-generation circuit using silicon avalanche devices

    Science.gov (United States)

    Benzel, D. M.; Pocha, M. D.

    1985-07-01

    A Marx configured avalanche transistor string and a pulse rise-time peaking diode are used to generate pulses of >1000 V into a 50-Ω load with rise times of less than 300 ps. The trigger delay of this circuit is about 7-10 ns, with jitter <100 ps. This circuit has been used to generate pulses at a repetition rate up to 5 kHz.

  17. Molecular Cloning and Expression Analysis of Cryptochrome Gene PsCRY2 in Tree Peony

    Directory of Open Access Journals (Sweden)

    Xiuxia REN

    2016-11-01

    Full Text Available Cryptochromes are blue/ultraviolet-A (UV-A light receptors involved in regulating various aspects of plant growth and development. Investigations of the structure and functions of cryptochromes in plants have largely focused on herbaceous plants. However, few data on the function of CRY2 are available in woody plants. In this study, a cryptochrome 2 (CRY2 gene was isolated from Paeonia suffruticosa by Reverse Transcription Polymerase Chain Reaction (RT-PCR. Sequence alignment and motif analysis showed that the deduced amino acids contained a PHR domain near the amino terminus and a CCT domain near the carboxy terminus. PsCRY2 showed high identity with AtCRY2 of Arabidopsis. Phylogenetic analysis indicated that it was closely related to Citrus sinensis. Gene expression analysis revealed that the highest expression levels of PsCRY2 occurred in the bud and seed embryo of P. suffruticosa, followed by the roots, stems, and leaves. PsCRY2 was upregulated during the entire process of bud differentiation, whereas this was downregulated during the early stage of bud development and upregulated in the middle and late stages. The highest level of PsCRY2 expression was observed in the big bell-like flower buds. These results suggested that PsCRY2 plays an important role in both bud differentiation and bud development. The expression patterns of PsCRY2 in the buds of ‘Luoyanghong’ and ‘Qiufa 1’ were similar, whereas that in the buds of ‘Qiufa 1’ was significantly higher than in the buds of ‘Luoyanghong’. The buds of plants subjected to different photoperiod treatments exhibited variations in PsCRY2 expression patterns. The expression of PsCRY2 decreased during bud sprouting and in the small bell-like flower buds that were subjected to short-day photoperiod compared to that observed under long-day photoperiod.

  18. APP/PS1 transgenic mice treated with aluminum: an update of Alzheimer's disease model.

    Science.gov (United States)

    Zhang, Q L; Jia, L; Jiao, X; Guo, W L; Ji, J W; Yang, H L; Niu, Q

    2012-01-01

    There is still no animal model available that can mimic all the cognitive, behavioral, biochemical, and histopathological abnormalities observed in patients with Alzheimer's disease (AD). We undertook to consider the interaction between genetic factors, including amyloid precursor protein (APP) and presenilin-1 (PS1), and environmental factors, such as Aluminum (Al) in determining susceptibility outcomes when studying the pathogenesis of AD. In this article, we provide an AD model in APP/PS1 transgenic mice triggered by Al. The animal model was established via intracerebral ventricular microinjection of aluminum chloride once a day for 5 days in APP/PS1 transgenic mice. Twenty wild type (WT) mice and 20 APP/PS1 transgenic (TG) mice were separately divided into 2 groups (control and Al group), and a stainless steel injector with stopper was used for microinjection into the left-lateral cerebral ventricle of each mouse. The Morris water maze task was used to evaluate behavioral function of learning and memory ability on the 20th day after the last injection. This AD model's brain was analyzed by: (1) amyloid beta immunohistochemical staining; (2) Tunnel staining; (3) apoptotic rates; (4) caspase-3 gene expression. Here, decrease of cognitive ability and neural cells loss were shown in APP/PS1 transgenic mice exposed to Al, which were more extensive than those in APP/PS1 TG alone and WT mice exposed to Al alone. These findings indicate that there is a close relationship between over-expression of APP and PS1 genes and Al overload. It is also suggested that APP/PS1 TG mice exposed to Al have potential value for improving AD models.

  19. Public Health Impact After the Introduction of PsA-TT: The First 4 Years.

    OpenAIRE

    Diomandé, FV; Djingarey, MH; Daugla, DM; Novak, RT; Kristiansen, PA; Collard, JM; Gamougam, K; Kandolo, D; Mbakuliyemo, N; Mayer, L.; Stuart, J; Clark , T.; Tevi-Benissan, C; Perea, WA; Preziosi, MP

    2015-01-01

    Background. ?During the first introduction of a group A meningococcal vaccine (PsA-TT) in 2010?2011 and its rollout from 2011 to 2013, >150 million eligible people, representing 12 hyperendemic meningitis countries, have been vaccinated. Methods. ?The new vaccine effectiveness evaluation framework was established by the World Health Organization and partners. Meningitis case-based surveillance was strengthened in PsA-TT first-introducer countries, and several evaluation studies were conducted...