Applied Epistemology and Understanding in Information Studies

Science.gov (United States)

Gorichanaz, Tim

2017-01-01

Introduction: Applied epistemology allows information studies to benefit from developments in philosophy. In information studies, epistemic concepts are rarely considered in detail. This paper offers a review of several epistemic concepts, focusing on understanding, as a call for further work in applied epistemology in information studies. Method:…

Conceptual design study and evaluation of an advanced treatment process applying a submerged combustion technique for spent solvents

International Nuclear Information System (INIS)

Uchiyama, Gunzo; Maeda, Mitsuru; Fijine, Sachio; Chida, Mitsuhisa; Kirishima, Kenji.

1993-10-01

An advanced treatment process based on a submerged combustion technique was proposed for spent solvents and the distillation residues containing transuranium (TRU) nuclides. A conceptual design study and the preliminary cost estimation of the treatment facility applying the process were conducted. Based on the results of the study, the process evaluation on the technical features, such as safety, volume reduction of TRU waste and economics was carried out. The key requirements for practical use were also summarized. It was shown that the process had the features as follows: the simplified treatment and solidification steps will not generate secondary aqueous wastes, the volume of TRU solid waste will be reduced less than one tenth of that of a reference technique (pyrolysis process), and the facility construction cost is less than 1 % of the total construction cost of a future large scale reprocessing plant. As for the low level wastes of calcium phosphate, it was shown that the further removal of β · γ nuclides with TRU nuclides from the wastes would be required for the safety in interim storage and transportation and for the load of shielding. (author)

How credible are the study results? Evaluating and applying internal validity tools to literature-based assessments of environmental health hazards

Science.gov (United States)

Rooney, Andrew A.; Cooper, Glinda S.; Jahnke, Gloria D.; Lam, Juleen; Morgan, Rebecca L.; Boyles, Abee L.; Ratcliffe, Jennifer M.; Kraft, Andrew D.; Schünemann, Holger J.; Schwingl, Pamela; Walker, Teneille D.; Thayer, Kristina A.; Lunn, Ruth M.

2016-01-01

Environmental health hazard assessments are routinely relied upon for public health decision-making. The evidence base used in these assessments is typically developed from a collection of diverse sources of information of varying quality. It is critical that literature-based evaluations consider the credibility of individual studies used to reach conclusions through consistent, transparent and accepted methods. Systematic review procedures address study credibility by assessing internal validity or “risk of bias” — the assessment of whether the design and conduct of a study compromised the credibility of the link between exposure/intervention and outcome. This paper describes the commonalities and differences in risk-of-bias methods developed or used by five groups that conduct or provide methodological input for performing environmental health hazard assessments: the Grading of Recommendations Assessment, Development, and Evaluation (GRADE) Working Group, the Navigation Guide, the National Toxicology Program’s (NTP) Office of Health Assessment and Translation (OHAT) and Office of the Report on Carcinogens (ORoC), and the Integrated Risk Information System of the U.S. Environmental Protection Agency (EPA-IRIS). Each of these groups have been developing and applying rigorous assessment methods for integrating across a heterogeneous collection of human and animal studies to inform conclusions on potential environmental health hazards. There is substantial consistency across the groups in the consideration of risk-of-bias issues or “domains” for assessing observational human studies. There is a similar overlap in terms of domains addressed for animal studies; however, the groups differ in the relative emphasis placed on different aspects of risk of bias. Future directions for the continued harmonization and improvement of these methods are also discussed. PMID:26857180

Evaluation model applied to TRANSPETRO's Marine Terminals Standardization Program

Energy Technology Data Exchange (ETDEWEB)

Almeida, Maria Fatima Ludovico de; Mueller, Gabriela [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), Rio de Janeiro, RJ (Brazil). Instituto Tecnologico; Garcia, Luciano Maldonado [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil)

2009-07-01

This paper describes an innovative evaluation model applied to TRANSPETRO's 'Marine Terminals Standardization Program' based on updating approaches of programs evaluation and organizational learning. Since the program was launched in 2004, the need for having an evaluation model able to evaluate its implementation progress, to measure the degree of standards compliance and its potential economic, social and environmental impacts has become evident. Within a vision of safe and environmentally responsible operations of marine terminals, this evaluation model was jointly designed by TRANSPETRO and PUC-Rio to promote continuous improvement and learning in operational practices and in the standardization process itself. TRANSPETRO believes that standardization supports its services and management innovation capability by creating objective and internationally recognized parameters, targets and metrology for its business activities. The conceptual model and application guidelines for this important tool are presented in this paper, as well as the next steps towards its implementation. (author)

Applying the methodology of Design of Experiments to stability studies: a Partial Least Squares approach for evaluation of drug stability.

Science.gov (United States)

Jordan, Nika; Zakrajšek, Jure; Bohanec, Simona; Roškar, Robert; Grabnar, Iztok

2018-05-01

The aim of the present research is to show that the methodology of Design of Experiments can be applied to stability data evaluation, as they can be seen as multi-factor and multi-level experimental designs. Linear regression analysis is usually an approach for analyzing stability data, but multivariate statistical methods could also be used to assess drug stability during the development phase. Data from a stability study for a pharmaceutical product with hydrochlorothiazide (HCTZ) as an unstable drug substance was used as a case example in this paper. The design space of the stability study was modeled using Umetrics MODDE 10.1 software. We showed that a Partial Least Squares model could be used for a multi-dimensional presentation of all data generated in a stability study and for determination of the relationship among factors that influence drug stability. It might also be used for stability predictions and potentially for the optimization of the extent of stability testing needed to determine shelf life and storage conditions, which would be time and cost-effective for the pharmaceutical industry.

A new method of AHP applied to personal credit evaluation

Institute of Scientific and Technical Information of China (English)

JIANG Ming-hui; XIONG Qi; CAO Jing

2006-01-01

This paper presents a new negative judgment matrix that combines the advantages of the reciprocal judgment matrix and the fuzzy complementary judgment matrix, and then puts forth the properties of this new matrix. In view of these properties, this paper derives a clear sequencing formula for the new negative judgment matrix, which improves the sequencing principle of AHP. Finally, this new method is applied to personal credit evaluation to show its advantages of conciseness and swiftness.

Applying Knowledge Management in Teacher Evaluation Systems

Science.gov (United States)

Essandoh, Albert

2013-01-01

Teacher evaluations are underused in public schools, resulting in the loss of knowledge critical to professional development. Knowledge management (KM) theory offers approaches that can lead to improvements in the effectiveness of evaluations and teacher performance. This multiple case study of 9 campuses in an exemplary school district…

Economic Evaluation of Hydrological Ecosystem Services in Mediterranean River Basins Applied to a Case Study in Southern Italy

Directory of Open Access Journals (Sweden)

Marcello Mastrorilli

2018-02-01

Full Text Available Land use affects eco-hydrological processes with consequences for floods and droughts. Changes in land use affect ecosystems and hydrological services. The objective of this study is the analysis of hydrological services through the quantification of water resources, pollutant loads, land retention capacity and soil erosion. On the basis of a quantitative evaluation, the economic values of the ecosystem services are estimated. By assigning an economic value to the natural resources and to the hydraulic system, the hydrological services can be computed at the scale of catchment ecosystem. The proposed methodology was applied to the basin “Bonis” (Calabria Region, Italy. The study analyses four land use scenarios: (i forest cover with good vegetative status (baseline scenario; (ii modification of the forest canopy; (iii variation in forest and cultivated surfaces; (iv insertion of impermeable areas. The simulations prove that the variations of the state of forest areas has considerable influence on the water balance, and then on the provided economic value. Small economic changes derive from reducing the impermeable areas. Increasing the agricultural area to 50% of the total, and reducing the forest surface, affects soil erosion, reduces the storage capacity of the water, and consequently the water harvesting. The suggested methodology can be considered a suitable tool for land planning.

An evaluation of an operating BWR piping system damping during earthquake by applying auto regressive analysis

International Nuclear Information System (INIS)

Kitada, Y.; Makiguchi, M.; Komori, A.; Ichiki, T.

1985-01-01

The records of three earthquakes which had induced significant earthquake response to the piping system were obtained with the earthquake observation system. In the present paper, first, the eigenvalue analysis results for the natural piping system based on the piping support (boundary) conditions are described and second, the frequency and the damping factor evaluation results for each vibrational mode are described. In the present study, the Auto Regressive (AR) analysis method is used in the evaluation of natural frequencies and damping factors. The AR analysis applied here has a capability of direct evaluation of natural frequencies and damping factors from earthquake records observed on a piping system without any information on the input motions to the system. (orig./HP)

Evaluation Models for E-Learning Platform in Riyadh City Universities (RCU with Applied of Geographical Information System (GIS

Directory of Open Access Journals (Sweden)

Abdulaziz I. Alharrah

2014-12-01

Full Text Available E-learning that integrates digital knowledge content, network and information technology has become an emerging learning method. As the e-learning platform approach is becoming an important tool to allow the flexibility and quality requested by such a kind of learning process. There is a new kind of problem faced by organizations consisting in the selection of the most suitable e-learning platform. This paper proposes evaluation model for E-Learning platform in Riyadh City universities (RCU with Applied Geographic Information System (GIS. The E-Learning platform solution selection is a multiple criteria decision-making problem that needs to be addressed objectively taking into consideration the relative weights of the criteria for any organization. We formulate the quoted multi criteria problem as a decision hierarchy to be solved using GIS. AGIS-based evaluation index system and web-based evaluating platform were established. In this paper we will show the general evaluation strategy and some obtained results using our model to evaluate some existing commercial platforms.The results of evaluation model are outlined as follows: Total weights of the proposed framework in management feature is 20.25/25, in collaborative feature is 9.2/10, in adaption learning path is 6.8/10 and in interactive learning object is 5/5. The total weights of all features are 41.25/50. In this study an evaluation model was applied on Riyadh City universities like KSU, IMAMU, NAUSS, YU and FU. Then, the results were compared with each other. The total weighs of KSU was 41. While the total weights of FU, IMAMU, YU and NAUSS was 40, 37, 36 and 32, respectively. Evaluation process shows that the proposed framework satisfied the objectives with applied GIS.

Evaluation of water resources monitoring networks: study applied to surface waters in the Macaé River Basin

Directory of Open Access Journals (Sweden)

Carolina Cloris Lopes Benassuly

2012-04-01

Full Text Available Knowledge of hydrological phenomena is required in water resources monitoring, in order to structure the water management, focusing on ensuring its multiple uses while allowing that resource´s control and conservation. The effectiveness of monitoring depends on adequate information systems design and proper operation conditions. Data acquisition, treatment and analysis are vital for establishing management strategies, thus monitoring systems and networks shall be conceived according to their main objectives, and be optimized in terms of location of data stations. The generated data shall also model hydrological behavior of the studied basin, so that data interpolation can be applied to the whole basin. The present work aimed to join concepts and methods that guide the structuring of hydrologic monitoring networks of surface waters. For evaluating historical series characteristics as well as work stations redundancy, the entropy method was used. The Macaé River Basin’s importance is related to the public and industrial uses of water in the region that is responsible for more than 80% of Brazilian oil and gas production, what justifies the relevance of the research made. This study concluded that despite of its relatively short extension, the Macaé River Basin should have higher monitoring network density, in order to provide more reliable management data. It also depicted the high relevancy of stations located in its upper course.

Absolute order-of-magnitude reasoning applied to a social multi-criteria evaluation framework

Science.gov (United States)

Afsordegan, A.; Sánchez, M.; Agell, N.; Aguado, J. C.; Gamboa, G.

2016-03-01

A social multi-criteria evaluation framework for solving a real-case problem of selecting a wind farm location in the regions of Urgell and Conca de Barberá in Catalonia (northeast of Spain) is studied. This paper applies a qualitative multi-criteria decision analysis approach based on linguistic labels assessment able to address uncertainty and deal with different levels of precision. This method is based on qualitative reasoning as an artificial intelligence technique for assessing and ranking multi-attribute alternatives with linguistic labels in order to handle uncertainty. This method is suitable for problems in the social framework such as energy planning which require the construction of a dialogue process among many social actors with high level of complexity and uncertainty. The method is compared with an existing approach, which has been applied previously in the wind farm location problem. This approach, consisting of an outranking method, is based on Condorcet's original method. The results obtained by both approaches are analysed and their performance in the selection of the wind farm location is compared in aggregation procedures. Although results show that both methods conduct to similar alternatives rankings, the study highlights both their advantages and drawbacks.

Method of levelized discounted costs applied in economic evaluation of nuclear power plant project

International Nuclear Information System (INIS)

Tian Li; Wang Yongqing; Liu Jingquan; Guo Jilin; Liu Wei

2000-01-01

The main methods of economic evaluation of bid which are in common use are introduced. The characteristics of levelized discounted cost method and its application are presented. The method of levelized discounted cost is applied to the cost calculation of a 200 MW nuclear heating reactor economic evaluation. The results indicate that the method of levelized discounted costs is simple, feasible and which is considered most suitable for the economic evaluation of various case. The method is suggested which is used in the national economic evaluation

Photographic-Based Optical Evaluation of Tissues and Biomaterials Used for Corneal Surface Repair: A New Easy-Applied Method.

Directory of Open Access Journals (Sweden)

Miguel Gonzalez-Andrades

Full Text Available Tissues and biomaterials used for corneal surface repair require fulfilling specific optical standards prior to implantation in the patient. However, there is not a feasible evaluation method to be applied in clinical or Good Manufacturing Practice settings. In this study, we describe and assess an innovative easy-applied photographic-based method (PBM for measuring functional optical blurring and transparency in corneal surface grafts.Plastic compressed collagen scaffolds (PCCS and multilayered amniotic membranes (AM samples were optically and histologically evaluated. Transparency and image blurring measures were obtained by PBM, analyzing photographic images of a standardized band pattern taken through the samples. These measures were compared and correlated to those obtained applying the Inverse Adding-Doubling (IAD technique, which is the gold standard method.All the samples used for optical evaluation by PBM or IAD were histological suitable. PCCS samples presented transmittance values higher than 60%, values that increased with increasing wavelength as determined by IAD. The PBM indicated that PCCS had a transparency ratio (TR value of 80.3 ± 2.8%, with a blurring index (BI of 50.6 ± 4.2%. TR and BI obtained from the PBM showed a high correlation (ρ>|0.6| with the diffuse transmittance and the diffuse reflectance, both determined using the IAD (p<0.005. The AM optical properties showed that there was a largely linear relationship between the blurring and the number of amnion layers, with more layers producing greater blurring.This innovative proposed method represents an easy-applied technique for evaluating transparency and blurriness of tissues and biomaterials used for corneal surface repair.

Applying a realistic evaluation model to occupational safety interventions

DEFF Research Database (Denmark)

Pedersen, Louise Møller

2018-01-01

Background: Recent literature characterizes occupational safety interventions as complex social activities, applied in complex and dynamic social systems. Hence, the actual outcomes of an intervention will vary, depending on the intervention, the implementation process, context, personal characte......Background: Recent literature characterizes occupational safety interventions as complex social activities, applied in complex and dynamic social systems. Hence, the actual outcomes of an intervention will vary, depending on the intervention, the implementation process, context, personal...... and qualitative methods. This revised model has, however, not been applied in a real life context. Method: The model is applied in a controlled, four-component, integrated behaviour-based and safety culture-based safety intervention study (2008-2010) in a medium-sized wood manufacturing company. The interventions...... involve the company’s safety committee, safety manager, safety groups and 130 workers. Results: The model provides a framework for more valid evidence of what works within injury prevention. Affective commitment and role behaviour among key actors are identified as crucial for the implementation...

Applying fuzzy integral for evaluating intensity of knowledge work in jobs

Directory of Open Access Journals (Sweden)

Jalil Heidary Dahooie

2013-10-01

Full Text Available In this article, a framework is proposed to define and identify knowledge work intensity in jobs, quantitatively. For determining the Knowledge Work Intensity Score (KWIS of a job, it is supposed that the job comprises some tasks and KWIS of the job is determined based on knowledge intensity of these tasks. Functional Job Analysis (FJA method is applied to determine tasks of jobs and then Task’s Knowledge Intensity Score (TKIS is computed by using Fuzzy integral method. Besides, importance weight and time weight of tasks are determined by utilizing appropriate methods. Finally, KWIS is calculated by a formula composed of tasks’ TKISs and the weights. For evaluating applicability of the framework, it is applied to calculate KWISs of two jobs (Deputy of Finance and service, Laboratory technician.

Evaluating cartographic design principles applied to space-time cube content

DEFF Research Database (Denmark)

Kveladze, Irma; Kraak, Menno-Jan

2013-01-01

the different uses of the graphic variables and depth cues to represent the paths and stations. Both quantitative and qualitative evaluation methods were applied during the testing. The results gave an indication on how design influence the 'performance' of the STC, and resulted in guidelines for the design...... to the neglectance of a proper cartographic design. To judge the influence of this design on the effectiveness and efficiency of the STC as a graphic representation of movement data a user-centered design evaluation has been set up. The experiment included two applications each with its own characteristic data...... complexity and content. It involved a historic and an urban problem case. The first is a relatively simple dataset of historical movements and the second is a complex dataset of pedestrians movement. Based on questions formulated by domain experts different design scenarios were tested. These included...

Quality assurance applied to mammographic equipments using phantoms and software for its evaluation

Energy Technology Data Exchange (ETDEWEB)

Mayo, Patricia, E-mail: p.mayo@titaniast.co [Titania Servicios Tecnologicos S.L., Grupo Dominguis, Apartado 46015, Valencia (Spain); Rodenas, Francisco [Departamento de Matematica Aplicada, Universidad Politecnica de Valencia, Apartado 46022, Valencia (Spain); Manuel Campayo, Juan [Hospital Clinico Universitario de Valencia, Avda. Blasco Ibanez, Apartado 46017, Valencia (Spain); Verdu, Gumersido [Departamento de Ingenieria Quimica y Nuclear, Universidad Politecnica de Valencia, Apartado 46022, Valencia (Spain)

2010-07-21

The image quality assessment in radiographic equipments is a very important item for a complete quality control of the radiographic image chain. The periodic evaluation of the radiographic image quality must guarantee the constancy of this quality to carry out a suitable diagnosis. Mammographic phantom images are usually used to study the quality of images obtained by determined mammographic equipment. The digital image treatment techniques allow to carry out an automatic analysis of the phantom image. In this work we apply some techniques of digital image processing to analyze in an automatic way the image quality of mammographic phantoms, namely CIRS SP01 and RACON for different varying conditions of the mammographic equipment. The CIRS SP01 phantom is usually used in analogic mammographic equipments and the RACON phantom has been specifically developed by authors to be applied to acceptance and constancy tests of the image quality in digital radiographic equipments following recommendations of international associations. The purpose of this work consists in analyzing the image quality for both phantoms by means of an automatic software utility. This analysis allows us to study the functioning of the image chain of the mammographic system in an objective way, so an abnormal functioning of the radiographic equipment might be detected.

Quality assurance applied to mammographic equipments using phantoms and software for its evaluation

International Nuclear Information System (INIS)

Mayo, Patricia; Rodenas, Francisco; Manuel Campayo, Juan; Verdu, Gumersido

2010-01-01

The image quality assessment in radiographic equipments is a very important item for a complete quality control of the radiographic image chain. The periodic evaluation of the radiographic image quality must guarantee the constancy of this quality to carry out a suitable diagnosis. Mammographic phantom images are usually used to study the quality of images obtained by determined mammographic equipment. The digital image treatment techniques allow to carry out an automatic analysis of the phantom image. In this work we apply some techniques of digital image processing to analyze in an automatic way the image quality of mammographic phantoms, namely CIRS SP01 and RACON for different varying conditions of the mammographic equipment. The CIRS SP01 phantom is usually used in analogic mammographic equipments and the RACON phantom has been specifically developed by authors to be applied to acceptance and constancy tests of the image quality in digital radiographic equipments following recommendations of international associations. The purpose of this work consists in analyzing the image quality for both phantoms by means of an automatic software utility. This analysis allows us to study the functioning of the image chain of the mammographic system in an objective way, so an abnormal functioning of the radiographic equipment might be detected.

Study on scenario evaluation methodology for decommissioning nuclear facilities using fuzzy logic

International Nuclear Information System (INIS)

Matsuhashi, Kazuya; Yanagihara, Satoshi

2015-01-01

Since there are many scenarios of the process from start to completion of a decommissioning project, it is important to study scenarios of decommissioning by evaluating such properties as safety, cost, and technology. An optimum scenario with the highest feasibility in accordance with the facility and environmental conditions should be selected on the basis of the results of the study. For analyzing a scenario of decommissioning, we prepared structured work packages by using the work breakdown structures (WBS) method together with qualitative evaluation of the technologies being applied to work packages located at the bottom (the third level) of the WBS. A calculation model was constructed to evaluate the feasibility of a scenario where fuzzy logic is applied to derive a score of technology performance and TOPSIS is applied for getting a feasibility grade of the scenario from technical performance scoring. As a case study, the model was applied to the debris removal scenario of Fukushima Daiichi Nuclear Power Plant to confirm its applicability. Two scenarios, underwater and in-air debris removal cases, were characterized by extracting the work packages with the lowest feasibility and by obtaining total average scores of the scenarios. It is confirmed that the methodology developed is useful for the scenario evaluation of decommissioning nuclear facilities. (author)

Developments in life cycle assessment applied to evaluate the environmental performance of construction and demolition wastes.

Science.gov (United States)

Bovea, M D; Powell, J C

2016-04-01

This paper provides a review of the literature that applies the life cycle assessment (LCA) methodology to the assessment of the environmental performance of the life cycle of construction and demolition waste (CDW) management systems. This article is focused on generating a general mapping of the literature and on identifying the best practices in compliance with LCA framework and proposing directions for future LCA studies in this field. The temporal evolution of the research in this field and the aim of the studies have grown in parallel with the legal framework related to waste and energy efficiency of buildings. Most studies have been published in Europe, followed by USA. Asia and Australia, being at an incipient application stage to the rest of the world. Topics related to "LCA of buildings, including their EoL" and "LCA of general CDW management strategies" are the most frequently analysed, followed by "LCA of EoL of construction elements" and "LCA of natural material vs recycled material". Regarding the strategies, recycling off-site and incineration, both combined with landfill for the rejected fractions, are the most commonly applied. Re-use or recycling on-site is the strategy least applied. The key aspect when LCA is applied to evaluate CDW management systems is the need to normalise which processes to include in the system boundary and the functional unit, the use of inventory data adapted to the context of the case study and the definition of a common set of appropriate impact assessment categories. Also, it is important to obtain results disaggregated by unit processes. This will allow the comparison between case studies. Copyright © 2016 Elsevier Ltd. All rights reserved.

Evaluation of the potential for bioaerosols from land applied biosolids

Energy Technology Data Exchange (ETDEWEB)

Tanner, Benjamin; Brooks, John; Josephseon, Karen; Gerba, Charles; Pepper, Ian

2003-07-01

The overall objective of this study was to quantitatively and qualitatively document the potential hazards of biological aerosols derived from land applied biosolids, and ultimately develop risk assessment models and land-management strategies for safe, effective use of biosolids. The specific objectives were: i) Quantify bacterial and viral microorganisms emitted as bioaerosols from point sources of biosolids, and area (land-applied) sources of biosolids; ii) Develop risk assessment models based on a) hazard identification, b) dose response, c) exposure assessment; d) risk characterization. Research has consisted of laboratory studies at the University of Arizona and field studies at several regional U.S. locations. Bioaerosol samples have been collected via ''Impingement'' using SKC biosamplers. The biologicals monitored for included: i) viruses: enteroviruses, calciviruses; ii) phage e.g, MS2; iii) E. coil; iv) Salmonella; v) total coliforms; vi) Clostridium perfringens; vii) Aspergillus spp.; viii) Endotoxin. Air samples were collected at discrete distances torn both biosolid piles (point sources), or land applied biosolids (area sources). (author)

Evaluating the Theoretic Adequacy and Applied Potential of Computational Models of the Spacing Effect.

Science.gov (United States)

Walsh, Matthew M; Gluck, Kevin A; Gunzelmann, Glenn; Jastrzembski, Tiffany; Krusmark, Michael

2018-03-02

The spacing effect is among the most widely replicated empirical phenomena in the learning sciences, and its relevance to education and training is readily apparent. Yet successful applications of spacing effect research to education and training is rare. Computational modeling can provide the crucial link between a century of accumulated experimental data on the spacing effect and the emerging interest in using that research to enable adaptive instruction. In this paper, we review relevant literature and identify 10 criteria for rigorously evaluating computational models of the spacing effect. Five relate to evaluating the theoretic adequacy of a model, and five relate to evaluating its application potential. We use these criteria to evaluate a novel computational model of the spacing effect called the Predictive Performance Equation (PPE). Predictive Performance Equation combines elements of earlier models of learning and memory including the General Performance Equation, Adaptive Control of Thought-Rational, and the New Theory of Disuse, giving rise to a novel computational account of the spacing effect that performs favorably across the complete sets of theoretic and applied criteria. We implemented two other previously published computational models of the spacing effect and compare them to PPE using the theoretic and applied criteria as guides. © 2018 Cognitive Science Society, Inc.

Proposal and Evaluation of Management Method for College Mechatronics Education Applying the Project Management

Science.gov (United States)

Ando, Yoshinobu; Eguchi, Yuya; Mizukawa, Makoto

In this research, we proposed and evaluated a management method of college mechatronics education. We applied the project management to college mechatronics education. We practiced our management method to the seminar “Microcomputer Seminar” for 3rd grade students who belong to Department of Electrical Engineering, Shibaura Institute of Technology. We succeeded in management of Microcomputer Seminar in 2006. We obtained the good evaluation for our management method by means of questionnaire.

Social Science at the Center for Adaptive Optics: Synergistic Systems of Program Evaluation, Applied Research, Educational Assessment, and Pedagogy

Science.gov (United States)

Goza, B. K.; Hunter, L.; Shaw, J. M.; Metevier, A. J.; Raschke, L.; Espinoza, E.; Geaney, E. R.; Reyes, G.; Rothman, D. L.

2010-12-01

This paper describes the interaction of four elements of social science as they have evolved in concert with the Center for Adaptive Optics Professional Development Program (CfAO PDP). We hope these examples persuade early-career scientists and engineers to include social science activities as they develop grant proposals and carry out their research. To frame our discussion we use a metaphor from astronomy. At the University of California Santa Cruz (UCSC), the CfAO PDP and the Educational Partnership Center (EPC) are two young stars in the process of forming a solar system. Together, they are surrounded by a disk of gas and dust made up of program evaluation, applied research, educational assessment, and pedagogy. An idea from the 2001 PDP intensive workshops program evaluation developed into the Assessing Scientific Inquiry and Leadership Skills (AScILS) applied research project. In iterative cycles, AScILS researchers participated in subsequent PDP intensive workshops, teaching social science while piloting AScILS measurement strategies. Subsequent "orbits" of the PDP program evaluation gathered ideas from the applied research and pedagogy. The denser regions of this disk of social science are in the process of forming new protoplanets as tools for research and teaching are developed. These tools include problem-solving exercises or simulations of adaptive optics explanations and scientific reasoning; rubrics to evaluate the scientific reasoning simulation responses, knowledge regarding inclusive science education, and student explanations of science/engineering inquiry investigations; and a scientific reasoning curriculum. Another applied research project is forming with the design of a study regarding how to assess engineering explanations. To illustrate the mutual shaping of the cross-disciplinary, intergenerational group of educational researchers and their projects, the paper ends with a description of the professional trajectories of some of the

Testing applied in Brazilian studies in sport psychology

Directory of Open Access Journals (Sweden)

Andressa Melina Becker da Silva

2015-02-01

Full Text Available Sport Psychology is one of the areas of the expertise of psychologists that makes use assessment tools. Therefore depends on the construction and validation of instruments for this population. Examine the instruments cited in this literature can help in this process. This study examined the instruments validated for the Brazilian population, cited in national articles on Sport Psychology, from 2002 to 2012. The descriptors "validation", "test", "sport", and "Psychophysiology", were crossed with descriptors "anxiety", "stress", "depression", "motivation", "leadership", "aggression," "imagination," "humor," "self-esteem", and "self-efficacy" - on the electronic bases Periódicos/CAPES, SciELO-Brazil and PubMed, in January 2013. For 38 sports and other non-competitive, six instruments translated and validated in Brazil were found, but not yet assessed / approved by the Federal Council of Psychology. The inclusion of the psychophysiological measures in the evaluation process and the validation of the instruments applied to Sport Psychology are discusses.

Common cause evaluations in applied risk analysis of nuclear power plants

International Nuclear Information System (INIS)

Taniguchi, T.; Ligon, D.; Stamatelatos, M.

1983-04-01

Qualitative and quantitative approaches were developed for the evaluation of common cause failures (CCFs) in nuclear power plants and were applied to the analysis of the auxiliary feedwater systems of several pressurized water reactors (PWRs). Key CCF variables were identified through a survey of experts in the field and a review of failure experience in operating PWRs. These variables were classified into categories of high, medium, and low defense against a CCF. Based on the results, a checklist was developed for analyzing CCFs of systems. Several known techniques for quantifying CCFs were also reviewed. The information provided valuable insights in the development of a new model for estimating CCF probabilities, which is an extension of and improvement over the Beta Factor method. As applied to the analysis of the PWR auxiliary feedwater systems, the method yielded much more realistic values than the original Beta Factor method for a one-out-of-three system

Radial oil injection applied to main engine bearings: evaluation of injection control rules

DEFF Research Database (Denmark)

Estupiñan, EA; Santos, Ilmar

2012-01-01

, the dynamic behaviour of the main bearing of a medium-size engine is theoretically analysed when the engine operates with controllable radial oil injection and four different injection control rules. The theoretical investigation is based on a single-cylinder combustion engine model. The performance......The performance of main bearings in a combustion engine affects key functions such as durability, noise and vibration. Thus, with the aim of reducing friction losses and vibrations between the crankshaft and the bearings, the work reported here evaluates different strategies for applying...... controllable radial oil injection to main crankshaft journal bearings. In an actively lubricated bearing, conventional hydrodynamic lubrication is combined with controllable hydrostatic lubrication, where the oil injection pressures can be modified depending on the operational conditions. In this study...

An approach for evaluating the integrity of fuel applied in Innovative Nuclear Energy Systems

International Nuclear Information System (INIS)

Nakae, Nobuo; Ozawa, Takayuki; Ohta, Hirokazu; Ogata, Takanari; Sekimoto, Hiroshi

2014-01-01

One of the important issues in the study of Innovative Nuclear Energy Systems is evaluating the integrity of fuel applied in Innovative Nuclear Energy Systems. An approach for evaluating the integrity of the fuel is discussed here based on the procedure currently used in the integrity evaluation of fast reactor fuel. The fuel failure modes determining fuel life time were reviewed and fuel integrity was analyzed and compared with the failure criteria. Metal and nitride fuels with austenitic and ferritic stainless steel (SS) cladding tubes were examined in this study. For the purpose of representative irradiation behavior analyses of the fuel for Innovative Nuclear Energy Systems, the correlations of the cladding characteristics were modeled based on well-known characteristics of austenitic modified 316 SS (PNC316), ferritic–martensitic steel (PNC–FMS) and oxide dispersion strengthened steel (PNC–ODS). The analysis showed that the fuel lifetime is limited by channel fracture which is a nonductile type (brittle) failure associated with a high level of irradiation-induced swelling in the case of austenitic steel cladding. In case of ferritic steel, on the other hand, the fuel lifetime is controlled by cladding creep rupture. The lifetime evaluated here is limited to 200 GW d/t, which is lower than the target burnup value of 500 GW d/t. One of the possible measures to extend the lifetime may be reducing the fuel smeared density and ventilating fission gas in the plenum for metal fuel and by reducing the maximum cladding temperature from 650 to 600 °C for both metal and nitride fuel

An approach for evaluating the integrity of fuel applied in Innovative Nuclear Energy Systems

Energy Technology Data Exchange (ETDEWEB)

Nakae, Nobuo, E-mail: nakae-nobuo@jnes.go.jp [Center for Research into Innovative Nuclear Energy System, Tokyo Institute of Technology, 2-12-1-N1-19, Ookayama, Meguro-ku, Tokyo 152-8550 (Japan); Ozawa, Takayuki [Advanced Nuclear System Research and Development Directorate, Japan Atomic Energy Agency, 4-33, Muramatsu, Tokai-mura, Ibaraki-ken 319-1194 (Japan); Ohta, Hirokazu; Ogata, Takanari [Nuclear Technology Research Laboratory, Central Research Institute of Electric Power Industry, 2-11-1, Iwado Kita, Komae-shi, Tokyo 201-8511 (Japan); Sekimoto, Hiroshi [Center for Research into Innovative Nuclear Energy System, Tokyo Institute of Technology, 2-12-1-N1-19, Ookayama, Meguro-ku, Tokyo 152-8550 (Japan)

2014-03-15

One of the important issues in the study of Innovative Nuclear Energy Systems is evaluating the integrity of fuel applied in Innovative Nuclear Energy Systems. An approach for evaluating the integrity of the fuel is discussed here based on the procedure currently used in the integrity evaluation of fast reactor fuel. The fuel failure modes determining fuel life time were reviewed and fuel integrity was analyzed and compared with the failure criteria. Metal and nitride fuels with austenitic and ferritic stainless steel (SS) cladding tubes were examined in this study. For the purpose of representative irradiation behavior analyses of the fuel for Innovative Nuclear Energy Systems, the correlations of the cladding characteristics were modeled based on well-known characteristics of austenitic modified 316 SS (PNC316), ferritic–martensitic steel (PNC–FMS) and oxide dispersion strengthened steel (PNC–ODS). The analysis showed that the fuel lifetime is limited by channel fracture which is a nonductile type (brittle) failure associated with a high level of irradiation-induced swelling in the case of austenitic steel cladding. In case of ferritic steel, on the other hand, the fuel lifetime is controlled by cladding creep rupture. The lifetime evaluated here is limited to 200 GW d/t, which is lower than the target burnup value of 500 GW d/t. One of the possible measures to extend the lifetime may be reducing the fuel smeared density and ventilating fission gas in the plenum for metal fuel and by reducing the maximum cladding temperature from 650 to 600 °C for both metal and nitride fuel.

The Study on Food Sensory Evaluation based on Particle Swarm Optimization Algorithm

OpenAIRE

Hairong Wang; Huijuan Xu

2015-01-01

In this study, it explores the procedures and methods of the system for establishing food sensory evaluation based on particle swarm optimization algorithm, by means of explaining the interpretation of sensory evaluation and sensory analysis, combined with the applying situation of sensory evaluation in food industry.

Evaluation of Cases Applying to Child and Adolescent Psychiatry Outpatient Clinic to Receive Medical Board Report

Directory of Open Access Journals (Sweden)

Sibelnur Avcil

2017-11-01

Full Text Available Objective: The aim of this study was to evaluate socio-demographic characteristics, application reasons and diagnoses of cases applying to child and adolescent psychiatry outpatient clinic in order to receive a medical board report. Materials and Methods: File data of 405 cases in the child and adolescent group (0-18 years, who applied to Child and Adolescent Psychiatry Outpatient clinics of Adnan Menderes University Faculty of Medicine between 1 November 2014 and 31 October 2015 in order to receive a medical board report, were retrospectively examined. Results: Average age of the cases was determined as 6.32±4.62 years, and 42.7% (173 were female and 57.3% (232 were male. When reasons of applications to medical board for the disabled were examined, it was found that the most frequent reason of application is to make them receive special education or to continue their special education at the rate of 66%; when diagnosis distribution of the cases was examined, the most frequent diagnoses included mild mental retardation (28.3%, borderline intellectual functioning (23.5%, attention-deficit/hyperactivity disorder (13.6%, and learning disorder (12.6%. Conclusion: In our study, it was determined that the most frequent diagnosis in children applying to receive a medical board report was mild mental retardation and the most frequent reason of application was to receive special education report. The studies to be conducted with relation to cases applying to medical board for the disabled will help in formation of healthy demographic data about pathologies in our field and in approaching clinically to such cases.

Applying a Framework to Evaluate Assignment Marking Software: A Case Study on Lightwork

Science.gov (United States)

Heinrich, Eva; Milne, John

2012-01-01

This article presents the findings of a qualitative evaluation on the effect of a specialised software tool on the efficiency and quality of assignment marking. The software, Lightwork, combines with the Moodle learning management system and provides support through marking rubrics and marker allocations. To enable the evaluation a framework has…

Evaluation of Accelerated Ageing Tests for Metallic and Non-Metallic Graffiti Paints Applied to Stone

Directory of Open Access Journals (Sweden)

Patricia Sanmartín

2017-10-01

Full Text Available Graffiti are increasingly observed on urban and peri-urban buildings and their removal requires a huge financial outlay by local governments and agencies. Graffiti are not usually removed immediately, but rather over the passage of time, viz. months or even years. In this study, which forms part of a wider research project on graffiti removal, different methods (gravimetric analysis, examination of digital images, colour and infrared measurements were used to evaluate the performance of accelerated ageing tests (involving exposure to humidity, freeze-thawing cycles and NaCl and Na2SO4 salts for graffiti painted on stone. Silver (metallic and black (non-metallic graffiti spray paints were applied to two types of igneous rock (granite and rhyolitic ignimbrite and one sedimentary rock (fossiliferous limestone, i.e., biocalcarenite. The metallic and non-metallic graffiti spray paints acted differently on the stone surfaces, both chemically and physically. Older graffiti were found to be more vulnerable to weathering agents. The ageing test with NaCl and particularly Na2SO4, both applied to granite, proved the most severe on the paints, yielding more detrimental and faster artificial ageing of the type of material under study.

Ecotoxicological evaluation of sediments applied to environmental forensic investigation

Directory of Open Access Journals (Sweden)

R. H. Alves

Full Text Available Abstract The present study aimed to evaluate the potential for using toxicity assays with sediment samples for the detection of water pollution caused by the discharge of tannery effluents into water bodies and its application to environmental forensic investigation. The study included ecotoxicological evaluation of sediments, survey of benthic organisms in the field, as well as chromium, cadmium and lead dosage which provided data for a sediment quality triad evaluation. The sediment samples showed acute and chronic toxicity to the bioindicators, low biodiversity of benthic macrofauna and high chromium concentration, reaching up to 4365 mg.Kg–1. A close relationship was observed between the separate results of ecotoxicological sediment evaluation and the sediment quality triad. The sediment ecotoxicological assessment proved to be applicable to tracking sources of contamination related to tanneries and similar activities in environmental forensics.

Applying the evaluability principle to nutrition table information. How reference information changes people's perception of food products.

Science.gov (United States)

Visschers, Vivianne H M; Siegrist, Michael

2009-04-01

Consumers often neglect or misinterpret nutrition table information. We argue in this paper that this can be explained by the evaluability principle, which posits that people's evaluation of a product corresponds to a greater degree with the product's actual value when people receive reference information about the product than when they do not get this information. We tested this assumption concerning nutrition table information in two studies. In Study 1, respondents received one of six nutrition tables that differed on reference and summary information about either yogurt or chocolate. In the second study, we compared three nutrition tables from the previous study, as applied to either a low nutritional value yogurt or a high nutritional value yogurt. Participants were asked to rate the attractiveness and perceived healthiness of the product in both studies. Results indicated that reference information can change people's product perception. This seems to depend, however, on the product's nutritional value and on people's primary connotation for the product. In sum, the evaluability principle can explain people's perception of a food product. A nutrition table that is adapted to this principle appears to influence people's product perception so that it becomes more in line with its nutritional value. Implications for practice and further research are given.

On applying cognitive psychology.

Science.gov (United States)

Baddeley, Alan

2013-11-01

Recent attempts to assess the practical impact of scientific research prompted my own reflections on over 40 years worth of combining basic and applied cognitive psychology. Examples are drawn principally from the study of memory disorders, but also include applications to the assessment of attention, reading, and intelligence. The most striking conclusion concerns the many years it typically takes to go from an initial study, to the final practical outcome. Although the complexity and sheer timescale involved make external evaluation problematic, the combination of practical satisfaction and theoretical stimulation make the attempt to combine basic and applied research very rewarding. © 2013 The British Psychological Society.

The evaluator effect in usability studies: Problem detection and severity judgments

DEFF Research Database (Denmark)

Jacobsen, Niels Ebbe; Hertzum, Morten; John, Bonnie E.

1998-01-01

Usability studies are commonly used in industry and applied in research as a yardstick for other usability evaluation methods. Though usability studies have been studied extensively, one potential threat to their reliability has been left virtually untouched: the evaluator effect. In this study......, four evaluators individually analyzed four videotaped usability test sessions. Only 20% of the 93 detected problems were detected by all evaluators, and 46% were detected by only a single evaluator. From the total set of 93 problems the evaluators individually selected the ten problems they considered...... most severe. None of the selected severe problems appeared on all four evaluators’ top-10 lists, and 4 of the 11 problems that were considered severe by more than one evaluator were only detected by one or two evaluators. Thus, both detection of usability problems and selection of the most severe...

Evaluating radiographers' diagnostic accuracy in screen-reading mammograms: what constitutes a quality study?

International Nuclear Information System (INIS)

Debono, Josephine C; Poulos, Ann E

2015-01-01

The aim of this study was to first evaluate the quality of studies investigating the diagnostic accuracy of radiographers as mammogram screen-readers and then to develop an adapted tool for determining the quality of screen-reading studies. A literature search was used to identify relevant studies and a quality evaluation tool constructed by combining the criteria for quality of Whiting, Rutjes, Dinnes et al. and Brealey and Westwood. This constructed tool was then applied to the studies and subsequently adapted specifically for use in evaluating quality in studies investigating diagnostic accuracy of screen-readers. Eleven studies were identified and the constructed tool applied to evaluate quality. This evaluation resulted in the identification of quality issues with the studies such as potential for bias, applicability of results, study conduct, reporting of the study and observer characteristics. An assessment of the applicability and relevance of the tool for this area of research resulted in adaptations to the criteria and the development of a tool specifically for evaluating diagnostic accuracy in screen-reading. This tool, with further refinement and rigorous validation can make a significant contribution to promoting well-designed studies in this important area of research and practice

Applying the Analytic Hierarchy Process in healthcare research: A systematic literature review and evaluation of reporting.

Science.gov (United States)

Schmidt, Katharina; Aumann, Ines; Hollander, Ines; Damm, Kathrin; von der Schulenburg, J-Matthias Graf

2015-12-24

The Analytic Hierarchy Process (AHP), developed by Saaty in the late 1970s, is one of the methods for multi-criteria decision making. The AHP disaggregates a complex decision problem into different hierarchical levels. The weight for each criterion and alternative are judged in pairwise comparisons and priorities are calculated by the Eigenvector method. The slowly increasing application of the AHP was the motivation for this study to explore the current state of its methodology in the healthcare context. A systematic literature review was conducted by searching the Pubmed and Web of Science databases for articles with the following keywords in their titles or abstracts: "Analytic Hierarchy Process," "Analytical Hierarchy Process," "multi-criteria decision analysis," "multiple criteria decision," "stated preference," and "pairwise comparison." In addition, we developed reporting criteria to indicate whether the authors reported important aspects and evaluated the resulting studies' reporting. The systematic review resulted in 121 articles. The number of studies applying AHP has increased since 2005. Most studies were from Asia (almost 30%), followed by the US (25.6%). On average, the studies used 19.64 criteria throughout their hierarchical levels. Furthermore, we restricted a detailed analysis to those articles published within the last 5 years (n = 69). The mean of participants in these studies were 109, whereas we identified major differences in how the surveys were conducted. The evaluation of reporting showed that the mean of reported elements was about 6.75 out of 10. Thus, 12 out of 69 studies reported less than half of the criteria. The AHP has been applied inconsistently in healthcare research. A minority of studies described all the relevant aspects. Thus, the statements in this review may be biased, as they are restricted to the information available in the papers. Hence, further research is required to discover who should be interviewed and how, how

Multimodal Approach for Automatic Emotion Recognition Applied to the Tension Levels Study in TV Newscasts

Directory of Open Access Journals (Sweden)

Moisés Henrique Ramos Pereira

2015-12-01

Full Text Available This article addresses a multimodal approach to automatic emotion recognition in participants of TV newscasts (presenters, reporters, commentators and others able to assist the tension levels study in narratives of events in this television genre. The methodology applies state-of-the-art computational methods to process and analyze facial expressions, as well as speech signals. The proposed approach contributes to semiodiscoursive study of TV newscasts and their enunciative praxis, assisting, for example, the identification of the communication strategy of these programs. To evaluate the effectiveness of the proposed approach was applied it in a video related to a report displayed on a Brazilian TV newscast great popularity in the state of Minas Gerais. The experimental results are promising on the recognition of emotions on the facial expressions of tele journalists and are in accordance with the distribution of audiovisual indicators extracted over a TV newscast, demonstrating the potential of the approach to support the TV journalistic discourse analysis.This article addresses a multimodal approach to automatic emotion recognition in participants of TV newscasts (presenters, reporters, commentators and others able to assist the tension levels study in narratives of events in this television genre. The methodology applies state-of-the-art computational methods to process and analyze facial expressions, as well as speech signals. The proposed approach contributes to semiodiscoursive study of TV newscasts and their enunciative praxis, assisting, for example, the identification of the communication strategy of these programs. To evaluate the effectiveness of the proposed approach was applied it in a video related to a report displayed on a Brazilian TV newscast great popularity in the state of Minas Gerais. The experimental results are promising on the recognition of emotions on the facial expressions of tele journalists and are in accordance

EVALUATION OF METHODS FOR ESTIMATING FATIGUE PROPERTIES APPLIED TO STAINLESS STEELS AND ALUMINUM ALLOYS

Directory of Open Access Journals (Sweden)

Taylor Mac Intyer Fonseca Junior

2013-12-01

Full Text Available This work evaluate seven estimation methods of fatigue properties applied to stainless steels and aluminum alloys. Experimental strain-life curves are compared to the estimations obtained by each method. After applying seven different estimation methods at 14 material conditions, it was found that fatigue life can be estimated with good accuracy only by the Bäumel-Seeger method for the martensitic stainless steel tempered between 300°C and 500°C. The differences between mechanical behavior during monotonic and cyclic loading are probably the reason for the absence of a reliable method for estimation of fatigue behavior from monotonic properties for a group of materials.

Study on Economic Evaluation of Nuclear Power Plant's SSC

International Nuclear Information System (INIS)

Yun, Eun-Sub; Park, Young-Sheop

2007-01-01

As the operating year of nuclear power plant increases, more improvement plans on degraded SSCs(Structure, System, and Component) are suggested. Because of safety concern, the maintenance and replacing cost of nuclear power plant's SSCs are usually high and it can be a burden to financial control. To satisfy both safety and economic problems, systematic and efficient plans are needed. For this reason, KHNP is now developing the LTAM (Long Term Asset Management) program to establish the long term improvement plans for SSCs, from safety and economic point of views. Actually LTAM program is one of the steps of INPO ER (Equipment Reliability) process. In USA, EPRI (Electric Power Research Institute) has developed the LCM (Life Cycle Management) program and it was applied to some nuclear power plants. In this program, several alternatives are candidated. Then, economic evaluation is applied to each alternative. The result of economic evaluation affects to the final alternative decision. In this study, EPRI's economic evaluation method is reviewed

Non-destructive electrochemical techniques applied to the corrosion evaluation of the liner structures in nuclear power plants

International Nuclear Information System (INIS)

Martinez, I.; Castillo, A.; Andrade, C.

2008-01-01

The liner structure in nuclear power plants provides containment for the operation and therefore the study of its durability and integrity during its service life is an important issue. There are several causes for the deterioration of the liner, which in general involve corrosion due to its metallic nature. The present paper is aimed at describing the assessment of corrosion problems of two liners from two different nuclear power plants, which were evaluated using non-destructive electrochemical techniques. In spite of the testing difficulties arisen, from the results extracted it can be concluded that the electrochemical techniques applied are adequate for the corrosion evaluation. They provide important information about the integrity of the structure and allow for its evolution with time to be assessed

Applying the ISO 9126 Model to the Evaluation of an E-learning System in Iran

OpenAIRE

Hossein Pedram; Davood Karimzadegan Moghaddam; Zhaleh Asheghi

2012-01-01

One of the models presented in e-learning quality system field is ISO 9126 model, which applied in this research to evaluate e-learning system of Amirkabir University. This model system for evaluation, the six main variables provided that each of these variables by several other indicators was measured. Thus, the model parameters as ISO 9126 and turned the questionnaire survey among samples (120 experts and students of Amirkabir University) and the distribution were completed. Based on the re...

Influence of Images on the Evaluation of Jams Using Conjoint Analysis Combined with Check-All-That-Apply (CATA) Questions.

Science.gov (United States)

Miraballes, Marcelo; Gámbaro, Adriana

2018-01-01

A study of the influence of the use of images in a conjoint analysis combined with check-all-that apply (CATA) questions on jams was carried out. The relative importance of flavor and the information presented in the label in the willingness to purchase and the perception of how healthy the product is has been evaluated. Sixty consumers evaluated the stimuli presented only in text format (session 1), and another group of 60 consumers did so by receiving the stimuli in text format along with an image of the product (session 2). In addition, for each stimulus, consumers answered a CATA question consisting of 20 terms related to their involvement with the product. The perception of healthy increased when the texts were accompanied with images and also increased when the text included information. Willingness to purchase was only influenced by the flavor of the jams. The presence of images did not influence the CATA question's choice of terms, which were influenced by the information presented in the text. The use of a check-all-that-apply question in concepts provided an interesting possibility when they were combined with the results from the conjoint analysis, improving the comprehension of consumers' perception. Using CATA questions as an alternative way of evaluating consumer involvement seems to be beneficial and should be evaluated much further. © 2017 Institute of Food Technologists®.

Study guide for applied finite mathematics

CERN Document Server

Macri, Nicholas A

1982-01-01

Study Guide for Applied Finite Mathematics, Third Edition is a study guide that introduces beginners to the fundamentals of finite mathematics and its various realistic and relevant applications. Some applications of probability, game theory, and Markov chains are given. Each chapter includes exercises, and each set begins with basic computational ""drill"" problems and then progresses to problems with more substance.Comprised of 10 chapters, this book begins with exercises related to set theory and concepts such as the union and intersection of sets. Exercises on Cartesian coordinate

Standards and reliability in evaluation: when rules of thumb don't apply.

Science.gov (United States)

Norcini, J J

1999-10-01

The purpose of this paper is to identify situations in which two rules of thumb in evaluation do not apply. The first rule is that all standards should be absolute. When selection decisions are being made or when classroom tests are given, however, relative standards may be better. The second rule of thumb is that every test should have a reliability of .80 or better. Depending on the circumstances, though, the standard error of measurement, the consistency of pass/fail classifications, and the domain-referenced reliability coefficients may be better indicators of reproducibility.

The theory-based policy evaluation method applied to the ex-post evaluation of climate change policies in the built environment in the Netherlands

International Nuclear Information System (INIS)

Harmelink, Mirjam; Joosen, Suzanne; Blok, Kornelis

2005-01-01

The challenge within ex-post policy evaluation research is to unravel the whole policy process and evaluate the effect and effectiveness of the different steps. Through this unravelling of the policy implementation process, insight is gained on where something went wrong in the process of policy design and implementation and where the keys are for improving the effectiveness and efficiency. This article presents the results of an ex-post policy evaluation of the effect and effectiveness of the Energy Premium Regulation scheme and the Long Term Voluntary agreements to reduce CO 2 emissions in the built environment in the Netherlands applying the theory-based policy evaluation method. The article starts with a description of the theory-based policy evaluation method. The method begins with the formulation of a program theory, which describes the 'ideal' operation of a policy instrument, from the viewpoint of the policy makers. Thereupon the theory is checked and adapted through interviews with policy makers and executors, and the cause and effect chain is finally translated to (quantitative) indicators. The article shows that the theory-based evaluation method has benefits over other ex-post evaluation methods that include: The whole policy implementation process is evaluated and the focus is not just on the 'end-result' (i.e. efficiency improvement and CO 2 emission reduction). Through the development of indicators for each step in the implementation process, 'successes and failures' are quantified to the greatest possible extent. By applying this approach we not only learn whether policies are successful or not, but also why they succeeded or failed and how they can be improved

The digital geometric phase technique applied to the deformation evaluation of MEMS devices

International Nuclear Information System (INIS)

Liu, Z W; Xie, H M; Gu, C Z; Meng, Y G

2009-01-01

Quantitative evaluation of the structure deformation of microfabricated electromechanical systems is of importance for the design and functional control of microsystems. In this investigation, a novel digital geometric phase technique was developed to meet the deformation evaluation requirement of microelectromechanical systems (MEMS). The technique is performed on the basis of regular artificial lattices, instead of a natural atom lattice. The regular artificial lattices with a pitch ranging from micrometer to nanometer will be directly fabricated on the measured surface of MEMS devices by using a focused ion beam (FIB). Phase information can be obtained from the Bragg filtered images after fast Fourier transform (FFT) and inverse fast Fourier transform (IFFT) of the scanning electronic microscope (SEM) images. Then the in-plane displacement field and the local strain field related to the phase information will be evaluated. The obtained results show that the technique can be well applied to deformation measurement with nanometer sensitivity and stiction force estimation of a MEMS device

A method to evaluate performance reliability of individual subjects in laboratory research applied to work settings.

Science.gov (United States)

1978-10-01

This report presents a method that may be used to evaluate the reliability of performance of individual subjects, particularly in applied laboratory research. The method is based on analysis of variance of a tasks-by-subjects data matrix, with all sc...

Peripherally applied opioids for postoperative pain

DEFF Research Database (Denmark)

Nielsen, B N; Henneberg, S W; Schmiegelow, K

2015-01-01

BACKGROUND: Opioids applied peripherally at the site of surgery may produce postoperative analgesia with few side effects. We performed this systematic review to evaluate the analgesic effect of peripherally applied opioids for acute postoperative pain. METHODS: We searched PubMed (1966 to June...... 2013), Embase (1980 to June 2013), and the Cochrane Central Register of Controlled Trials (The Cochrane Library 2013, Issue 6). Randomized controlled trials investigating the postoperative analgesic effect of peripherally applied opioids vs. systemic opioids or placebo, measured by pain intensity...... difference -5 mm, 95% CI: -7 to -3) for peripherally applied opioids vs. placebo and statistically significant increased time to first analgesic (mean difference 153 min, 95% CI: 41-265). When preoperative inflammation was reported (five studies), peripherally applied opioids significantly improved...

Applying interprofessional Team-Based Learning in patient safety: a pilot evaluation study.

Science.gov (United States)

Lochner, Lukas; Girardi, Sandra; Pavcovich, Alessandra; Meier, Horand; Mantovan, Franco; Ausserhofer, Dietmar

2018-03-27

Interprofessional education (IPE) interventions are not always successful in achieving learning outcomes. Team-Based Learning (TBL) would appear to be a suitable pedagogical method for IPE, as it focuses on team performance; however, little is known about interprofessional TBL as an instructional framework for patient safety. In this pilot-study, we aimed to (1) describe participants' reactions to TBL, (2) observe their achievement with respect to interprofessional education learning objectives, and (3) document their attitudinal shifts with regard to patient safety behaviours. We developed and implemented a three-day course for pre-qualifying, non-medical healthcare students to give instruction on non-technical skills related to 'learning from errors'. The course consisted of three sequential modules: 'Recognizing Errors', 'Analysing Errors', and 'Reporting Errors'. The evaluation took place within a quasi-experimental pre-test-post-test study design. Participants completed self-assessments through valid and reliable instruments such as the Mennenga's TBL Student Assessment Instrument and the University of the West of England's Interprofessional Questionnaire. The mean scores of the individual readiness assurance tests were compared with the scores of the group readiness assurance test in order to explore if students learned from each other during group discussions. Data was analysed using descriptive (i.e. mean, standard deviation), parametric (i.e. paired t-test), and non-parametric (i.e. Wilcoxon signed-rank test) methods. Thirty-nine students from five different bachelor's programs attended the course. The participants positively rated TBL as an instructional approach. All teams outperformed the mean score of their individual members during the readiness assurance process. We observed significant improvements in 'communication and teamwork' and 'interprofessional learning' but not in 'interprofessional interaction' and 'interprofessional relationships

Noise resistance applied to the study of zinc rich paints

International Nuclear Information System (INIS)

Espada Recarey, L.; Sanchez Bermudez, A.; Urrejola Madrinan, S.; Bouzada Alvela, F.

2001-01-01

Electrochemical Noise has been one of the more useful analysis methods to the study the corrosion processes due to the fact that it is simple and cheap. The objective of this work is to check the efficiency of this technique when it is applied to the study of Rich Zinc Paints and specifically the Noise Resistance parameter which is very efficiency to study metal-electrolyte systems. Then this technique was applied to Rich Zinc Paints systems of which we have already information by means of electrochemical impedance spectroscopy. The outcomes of this paper show the efficiency of applying Noise Resistance technique to explain the behavior of this kind of systems. (Author) 18 refs

Applying DEA Technique to Library Evaluation in Academic Research Libraries.

Science.gov (United States)

Shim, Wonsik

2003-01-01

This study applied an analytical technique called Data Envelopment Analysis (DEA) to calculate the relative technical efficiency of 95 academic research libraries, all members of the Association of Research Libraries. DEA, with the proper model of library inputs and outputs, can reveal best practices in the peer groups, as well as the technical…

A review of methodologies applied in Australian practice to evaluate long-term coastal adaptation options

Directory of Open Access Journals (Sweden)

Timothy David Ramm

2017-01-01

Full Text Available Rising sea levels have the potential to alter coastal flooding regimes around the world and local governments are beginning to consider how to manage uncertain coastal change. In doing so, there is increasing recognition that such change is deeply uncertain and unable to be reliably described with probabilities or a small number of scenarios. Characteristics of methodologies applied in Australian practice to evaluate long-term coastal adaptation options are reviewed and benchmarked against two state-of-the-art international methods suited for conditions of uncertainty (Robust Decision Making and Dynamic Adaptive Policy Pathways. Seven out of the ten Australian case studies assumed the uncertain parameters, such as sea level rise, could be described deterministically or stochastically when identifying risk and evaluating adaptation options across multi-decadal periods. This basis is not considered sophisticated enough for long-term decision-making, implying that Australian practice needs to increase the use of scenarios to explore a much larger uncertainty space when assessing the performance of adaptation options. Two Australian case studies mapped flexible adaptation pathways to manage uncertainty, and there remains an opportunity to incorporate quantitative methodologies to support the identification of risk thresholds. The contextual framing of risk, including the approach taken to identify risk (top-down or bottom-up and treatment of uncertain parameters, were found to be fundamental characteristics that influenced the methodology selected to evaluate adaptation options. The small sample of case studies available suggests that long-term coastal adaptation in Australian is in its infancy and there is a timely opportunity to guide local government towards robust methodologies for developing long-term coastal adaptation plans.

Integrating knowledge generation with knowledge diffusion and utilization: a case study analysis of the Consortium for Applied Research and Evaluation in Mental Health.

Science.gov (United States)

Vingilis, Evelyn; Hartford, Kathleen; Schrecker, Ted; Mitchell, Beth; Lent, Barbara; Bishop, Joan

2003-01-01

Knowledge diffusion and utilization (KDU) have become a key focus in the health research community because of the limited success to date of research findings to inform health policies, programs and services. Yet, evidence indicates that successful KDU is often predicated on the early involvement of potential knowledge users in the conceptualization and conduct of the research and on the development of a "partnership culture". This study describes the integration of KDU theory with practice via a case study analysis of the Consortium for Applied Research and Evaluation in Mental Health (CAREMH). This qualitative study, using a single-case design, included a number of data sources: proposals, meeting minutes, presentations, publications, reports and curricula vitae of CAREMH members. CAREMH has adopted the following operational strategies to increase KDU capacity: 1) viewing research as a means and not as an end; 2) bringing the university and researcher to the community; 3) using participatory research methods; 4) embracing transdisciplinary research and interactions; and 5) using connectors. Examples of the iterative process between researchers and potential knowledge users in their contribution to knowledge generation, diffusion and utilization are provided. This case study supports the importance of early and ongoing involvement of relevant potential knowledge users in research to enhance its utilization potential. It also highlights the need for re-thinking research funding approaches.

Evaluation of PCR-based preimplantation genetic diagnosis applied to monogenic diseases: a collaborative ESHRE PGD consortium study

Science.gov (United States)

Dreesen, Jos; Destouni, Aspasia; Kourlaba, Georgia; Degn, Birte; Mette, Wulf Christensen; Carvalho, Filipa; Moutou, Celine; Sengupta, Sioban; Dhanjal, Seema; Renwick, Pamela; Davies, Steven; Kanavakis, Emmanouel; Harton, Gary; Traeger-Synodinos, Joanne

2014-01-01

Preimplantation genetic diagnosis (PGD) for monogenic disorders currently involves polymerase chain reaction (PCR)-based methods, which must be robust, sensitive and highly accurate, precluding misdiagnosis. Twelve adverse misdiagnoses reported to the ESHRE PGD-Consortium are likely an underestimate. This retrospective study, involving six PGD centres, assessed the validity of PCR-based PGD through reanalysis of untransferred embryos from monogenic-PGD cycles. Data were collected on the genotype concordance at PGD and follow-up from 940 untransferred embryos, including details on the parameters of PGD cycles: category of monogenic disease, embryo morphology, embryo biopsy and genotype assay strategy. To determine the validity of PCR-based PGD, the sensitivity (Se), specificity (Sp) and diagnostic accuracy were calculated. Stratified analyses were also conducted to assess the influence of the parameters above on the validity of PCR-based PGD. The analysis of overall data showed that 93.7% of embryos had been correctly classified at the time of PGD, with Se of 99.2% and Sp of 80.9%. The stratified analyses found that diagnostic accuracy is statistically significantly higher when PGD is performed on two cells versus one cell (P=0.001). Se was significantly higher when multiplex protocols versus singleplex protocols were applied (P=0.005), as well as for PGD applied on cells from good compared with poor morphology embryos (P=0.032). Morphology, however, did not affect diagnostic accuracy. Multiplex PCR-based methods on one cell, are as robust as those on two cells regarding false negative rate, which is the most important criteria for clinical PGD applications. Overall, this study demonstrates the validity, robustness and high diagnostic value of PCR-based PGD. PMID:24301057

Evaluation of Slow Release Fertilizer Applying Chemical and Spectroscopic methods

International Nuclear Information System (INIS)

AbdEl-Kader, A.A.; Al-Ashkar, E.A.

2005-01-01

Controlled-release fertilizer offers a number of advantages in relation to crop production in newly reclaimed soils. Butadiene styrene latex emulsion is one of the promising polymer for different purposes. In this work, laboratory evaluation of butadiene styrene latex emulsion 24/76 polymer loaded with a mixed fertilizer was carried out. Macro nutrients (N, P and K) and micro-nutrients(Zn, Fe, and Cu) were extracted by basic extract from the polymer fertilizer mixtures. Micro-sampling technique was investigated and applied to measure Zn, Fe, and Cu using flame atomic absorption spectrometry in order to overcome the nebulization difficulties due to high salt content samples. The cumulative releases of macro and micro-nutrients have been assessed. From the obtained results, it is clear that the release depends on both nutrients and polymer concentration in the mixture. Macro-nutrients are released more efficient than micro-nutrients of total added. Therefore it can be used for minimizing micro-nutrients hazard in soils

Application of Learning Curves for Didactic Model Evaluation: Case Studies

Directory of Open Access Journals (Sweden)

Felix Mödritscher

2013-01-01

Full Text Available The success of (online courses depends, among other factors, on the underlying didactical models which have always been evaluated with qualitative and quantitative research methods. Several new evaluation techniques have been developed and established in the last years. One of them is ‘learning curves’, which aim at measuring error rates of users when they interact with adaptive educational systems, thereby enabling the underlying models to be evaluated and improved. In this paper, we report how we have applied this new method to two case studies to show that learning curves are useful to evaluate didactical models and their implementation in educational platforms. Results show that the error rates follow a power law distribution with each additional attempt if the didactical model of an instructional unit is valid. Furthermore, the initial error rate, the slope of the curve and the goodness of fit of the curve are valid indicators for the difficulty level of a course and the quality of its didactical model. As a conclusion, the idea of applying learning curves for evaluating didactical model on the basis of usage data is considered to be valuable for supporting teachers and learning content providers in improving their online courses.

Micronutrients evaluation in Bidens pilosa L., a plant applied in diabetes treatments

Energy Technology Data Exchange (ETDEWEB)

Goncalves, Rodolfo D.M.R.; Silva, Paulo S.C. da, E-mail: rdmrg89@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2015-07-01

Diabetes mellitus is a disease that has increasingly affected individuals over the last years. World Health Organization estimates that the worldwide number of diabetes cases will rise from 171 million in 2000 to 366 million in 2030. Besides the therapy with pharmaceutical drugs, many diabetic patients use medicinal plants to control the glycemic levels. This herb has anti-diabetic action due to the presence of organic compounds and micronutrients. Among the plants applied in diabetes treatment, Bidens pilosa L., popularly known in Brazil as picao preto, belongs to the family of Asteraceaes, grows fast and is globally distributed. The aim of this study was evaluate the concentration of Cr, Fe, Mg, Mn, V and Zn in aerial parts of Bidens pilosa samples, as well as its growth substrate by means of instrumental neutron activation analysis (INAA). The samples were separated into two groups named control and treatment. During the plant development, micronutrient solution, containing Cr, Fe, Mg, Mn, V and Zn, was added to the treatment group. It was observed that micronutrient solution added to the Biden pilosa samples may had contributed to the preferentially absorption of Fe, Mg and V, as well as to decrease Zn absorption. (author)

Micronutrients evaluation in Bidens pilosa L., a plant applied in diabetes treatments

International Nuclear Information System (INIS)

Goncalves, Rodolfo D.M.R.; Silva, Paulo S.C. da

2015-01-01

Diabetes mellitus is a disease that has increasingly affected individuals over the last years. World Health Organization estimates that the worldwide number of diabetes cases will rise from 171 million in 2000 to 366 million in 2030. Besides the therapy with pharmaceutical drugs, many diabetic patients use medicinal plants to control the glycemic levels. This herb has anti-diabetic action due to the presence of organic compounds and micronutrients. Among the plants applied in diabetes treatment, Bidens pilosa L., popularly known in Brazil as picao preto, belongs to the family of Asteraceaes, grows fast and is globally distributed. The aim of this study was evaluate the concentration of Cr, Fe, Mg, Mn, V and Zn in aerial parts of Bidens pilosa samples, as well as its growth substrate by means of instrumental neutron activation analysis (INAA). The samples were separated into two groups named control and treatment. During the plant development, micronutrient solution, containing Cr, Fe, Mg, Mn, V and Zn, was added to the treatment group. It was observed that micronutrient solution added to the Biden pilosa samples may had contributed to the preferentially absorption of Fe, Mg and V, as well as to decrease Zn absorption. (author)

Social Comparison Theory and the Evaluation of Peer Evaluations: A Review and Some Applied Implications.

Science.gov (United States)

Mumford, Michael D.

1983-01-01

Reviewed characteristics of peer evaluations and notes their striking industrial validity. A review of the conditions under which peer evaluations yield strong validity coefficients as well as certain factor analytic and experimental studies indicated that social comparison theory might be useful for elucidating the nature of peer evaluation…

Theoretical evaluation of measurement uncertainties of two-color pyrometry applied to optical diagnostics

International Nuclear Information System (INIS)

Fu Tairan; Cheng Xiaofang; Yang Zangjian

2008-01-01

We present a theoretical analysis of two-color pyrometry applied to optical diagnostics. A two-color pyrometer built with a single CCD is advantageous due to the simple system design. We evaluate the possibility and degree of ill-conditionness on the basis of measurement uncertainties for different measurement approaches of this two-color system. We classify measurement approaches. The corresponding ill-conditionness criterion is established. The greater the criterion value is, the worse the ill-conditioned degree of solution is. So, the optimum choice of measurement approach for the two-color system is achieved through intercomparison of the criterion values. Numerical examples are also given to illustrate this point. The theoretical analysis not only provides an effective way of evaluating different measurement approaches, but also may help us to better understand the influences that determine the choices between wavelength/waveband measurements and calibration/noncalibration modes for temperature and soot distribution

Preliminary Study on Impact Resistances of Fiber Reinforced Concrete Applied Nuclear Power Plants

International Nuclear Information System (INIS)

Jin, Byeong Moo; Kim, Young Jin; Jeon, Se Jin

2013-01-01

Studies to improve the impact resistance depending upon design parameters for fiber reinforced concrete, such as type of fibers and application ratio, are in progress. Authors assessed first the impact resistance of concrete walls depending upon fiber types and missile impact velocities. The safety assessment of nuclear power plants against large civil aircraft crashes have been accomplished for normal concrete and fiber reinforced concretes in this study. Studies on the safety assessments on the nuclear power plants against large civil aircraft crashes are ongoing actively. As a step of evaluating the applicability of fiber reinforced concrete in means of ensuring more structural safety of the nuclear power plants against impact, the impact resistance for the 1% steel and 2% polyamide fiber reinforced concretes have been evaluated. For reactor containment building structures, it seem there is no impact resistance enhancement of fiber reinforced concrete applied to reactor containment building in the cases of impact velocity 150 m/sec considered in this study. However this results from the pre-stressing forces which introduce compressive stresses in concrete wall and dome section of reactor containment building. Nonetheless there may be benefits to apply fiber reinforced concrete to nuclear power plants. For double containment type reactor containment building, the outer structure is a reinforced concrete structure. The impact resistances for non pre-stressed cylindrical reactor containment buildings are enhanced by 23 to 47 % for 2 % polyamide fiber reinforced concretes and 1 % steel fiber reinforced concretes respectively. For other buildings such as auxiliary building, compound building and fuel storage building surrounding the reactor containment building, there are so many reinforced concrete walls which are anticipated some enhancements of impact resistance by using fiber reinforced concretes. And heavier or faster large civil aircraft impacts produce higher

Preliminary Study on Impact Resistances of Fiber Reinforced Concrete Applied Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Jin, Byeong Moo; Kim, Young Jin; Jeon, Se Jin [Daewoo E and C Co. Ltd., Suwon (Korea, Republic of)

2013-10-15

Studies to improve the impact resistance depending upon design parameters for fiber reinforced concrete, such as type of fibers and application ratio, are in progress. Authors assessed first the impact resistance of concrete walls depending upon fiber types and missile impact velocities. The safety assessment of nuclear power plants against large civil aircraft crashes have been accomplished for normal concrete and fiber reinforced concretes in this study. Studies on the safety assessments on the nuclear power plants against large civil aircraft crashes are ongoing actively. As a step of evaluating the applicability of fiber reinforced concrete in means of ensuring more structural safety of the nuclear power plants against impact, the impact resistance for the 1% steel and 2% polyamide fiber reinforced concretes have been evaluated. For reactor containment building structures, it seem there is no impact resistance enhancement of fiber reinforced concrete applied to reactor containment building in the cases of impact velocity 150 m/sec considered in this study. However this results from the pre-stressing forces which introduce compressive stresses in concrete wall and dome section of reactor containment building. Nonetheless there may be benefits to apply fiber reinforced concrete to nuclear power plants. For double containment type reactor containment building, the outer structure is a reinforced concrete structure. The impact resistances for non pre-stressed cylindrical reactor containment buildings are enhanced by 23 to 47 % for 2 % polyamide fiber reinforced concretes and 1 % steel fiber reinforced concretes respectively. For other buildings such as auxiliary building, compound building and fuel storage building surrounding the reactor containment building, there are so many reinforced concrete walls which are anticipated some enhancements of impact resistance by using fiber reinforced concretes. And heavier or faster large civil aircraft impacts produce higher

The UV-VIS spectrophotometry applied to color and stability study in colored mortars

Directory of Open Access Journals (Sweden)

Alejandre, F. J.

1999-06-01

Full Text Available In the field of methodologies for color studying, a research of it has been done on colored mortars by applying uv-vis spectrophotometry, instrumental technique which can be used for solid materials works, and previously applied to building materials study. Results obtained show that the mentioned technique permits to evaluate quantitatively and qualitatively colors in an easy and objective way, besides nowadays advantages of the instrumental analysis: digital color register, computerized data processing, and precision and exactness increment in chromatic comparisons.

Dentro de las metodologías existentes para el estudio del color, se ha realizado una investigación del mismo en morteros coloreados por medio de la espectrofotometría UV-VIS, técnica instrumental que es adaptable al trabajo con materiales sólidos, y que ha sido aplicada anteriormente en el estudio de diversos materiales de construcción. Los resultados obtenidos muestran cómo la citada técnica permite además de evaluar cualitativamente y cuantitativamente los colores de forma sencilla y objetiva, el disponer de las ventajas que conlleva actualmente el análisis instrumental: registro digital del color, tratamiento informatizado de datos y aumento de precisión y exactitud en las comparaciones cromáticas.

Peaceful Uses Bona Fides: Criteria for Evaluation and Case Studies

Energy Technology Data Exchange (ETDEWEB)

Ajemian, Chris K.; Hazel, Mike; Kessler, Carol E.; Mathews, Carrie E.; Morris, Fred A.; Seward, Amy M.; Peterson, Danielle J.; Smith, Brian W.

2007-06-06

This study applies a set of indicators to assess the peaceful nature of a state’s nuclear program. Evaluation of a country’s nuclear program relative to these indicators can help the international community to take appropriate actions to ensure that the growth of the global nuclear energy industry proceeds peacefully and to minimize nuclear proliferation risks.

Symbolic Interaction and Applied Social Research

Science.gov (United States)

Kotarba, Joseph A.

2014-01-01

In symbolic interaction, a traditional yet unfortunate and unnecessary distinction has been made between basic and applied research. The argument has been made that basic research is intended to generate new knowledge, whereas applied research is intended to apply knowledge to the solution of practical (social and organizational) problems. I will argue that the distinction between basic and applied research in symbolic interaction is outdated and dysfunctional. The masters of symbolic interactionist thought have left us a proud legacy of shaping their scholarly thinking and inquiry in response to and in light of practical issues of the day (e.g., Znaniecki, and Blumer). Current interactionist work continues this tradition in topical areas such as social justice studies. Applied research, especially in term of evaluation and needs assessment studies, can be designed to serve both basic and applied goals. Symbolic interaction provides three great resources to do this. The first is its orientation to dynamic sensitizing concepts that direct research and ask questions instead of supplying a priori and often impractical answers. The second is its orientation to qualitative methods, and appreciation for the logic of grounded theory. The third is interactionism’s overall holistic approach to interfacing with the everyday life world. The primary illustrative case here is the qualitative component of the evaluation of an NIH-funded, translational medical research program. The qualitative component has provided interactionist-inspired insights into translational research, such as examining cultural change in medical research in terms of changes in the form and content of formal and informal discourse among scientists; delineating the impact of significant symbols such as "my lab" on the social organization of science; and appreciating the essence of the self-concept "scientist" on the increasingly bureaucratic and administrative identities of medical researchers. This

Teaching autonomy: turning the teaching evaluation of the Applied Optics course from impart knowledge to the new intelligent thinking

Science.gov (United States)

Zhao, Huifu; Chen, Yu; Liu, Dongmei

2017-08-01

There is a saying that "The teacher, proselytizes instructs dispels doubt." Traditional teaching methods, constantly let the students learn the knowledge in order to pursue the knowledge of a solid grasp, then assess the teaching result by evaluating of the degree of knowledge and memory. This approach cannot mobilize the enthusiasm of students to learn, and hinders the development of innovative thinking of students. And this assessment results have no practical significance, decoupling from practical application. As we all know, the course of Applied Optics is based on abstract theory. If the same teaching methods using for this course by such a "duck", it is unable to mobilize students' learning initiative, and then students' study results will be affected by passive acceptance of knowledge. How to take the initiative to acquire knowledge in the class to the students, and fully mobilize the initiative of students and to explore the potential of students, finally evaluation contents more research on the practical significance? Scholars continue to innovate teaching methods, as well as teaching evaluation indicators, the best teaching effect to promote the development of students. Therefore, this paper puts forward a set of teaching evaluation model of teaching autonomy. This so-called "autonomous teaching" is that teachers put forward the request or arrange the task and students complete the learning content in the form of a group to discuss learning before the lesson, and to complete the task of the layout, then teachers accept of students' learning achievements and answer questions. Every task is designed to evaluate the effectiveness of teaching. Every lesson should be combined with the progress of science and technology frontier of Applied Optics, let students understand the relationship between research and application in the future, mobilize the students interest in learning, training ability, learn to take the initiative to explore, team cooperation ability

Applying Hierarchical Task Analysis Method to Discovery Layer Evaluation

Directory of Open Access Journals (Sweden)

Marlen Promann

2015-03-01

Full Text Available Libraries are implementing discovery layers to offer better user experiences. While usability tests have been helpful in evaluating the success or failure of implementing discovery layers in the library context, the focus has remained on its relative interface benefits over the traditional federated search. The informal site- and context specific usability tests have offered little to test the rigor of the discovery layers against the user goals, motivations and workflow they have been designed to support. This study proposes hierarchical task analysis (HTA as an important complementary evaluation method to usability testing of discovery layers. Relevant literature is reviewed for the discovery layers and the HTA method. As no previous application of HTA to the evaluation of discovery layers was found, this paper presents the application of HTA as an expert based and workflow centered (e.g. retrieving a relevant book or a journal article method to evaluating discovery layers. Purdue University’s Primo by Ex Libris was used to map eleven use cases as HTA charts. Nielsen’s Goal Composition theory was used as an analytical framework to evaluate the goal carts from two perspectives: a users’ physical interactions (i.e. clicks, and b user’s cognitive steps (i.e. decision points for what to do next. A brief comparison of HTA and usability test findings is offered as a way of conclusion.

Optical dating results of beachrock, eolic dunes and sediments applied to sea-level changes study

International Nuclear Information System (INIS)

Tatumi, S.H.; Kowata, E.A.; Gozzi, G.; Kassab, L.R.P.; Suguio, K.; Barreto, A.M.F.; Bezerra, F.H.R.

2003-01-01

Quartz and feldspar crystals were selected from the samples as eolic dunes, beach-rock and marine terraces, all collected in the coast area of Paraiba State, located in northeastern Brazil, in order to obtain ages of deposition of the sediments. It is a systematic study in the area. The results of the ages will be used in local sea-level changes study and a correlation between highstands of marine oxygen-isotopes stages will be made. Optically stimulated luminescence and thermoluminescence have been measured and the regeneration method with multiple aliquot protocol was applied to obtain the paleodose values. Preliminaries ages spanning 3.2-229 kyr were evaluated

Optical dating results of beachrock, eolic dunes and sediments applied to sea-level changes study

Energy Technology Data Exchange (ETDEWEB)

Tatumi, S.H. E-mail: tatumi@fatecsp.br; Kowata, E.A.; Gozzi, G.; Kassab, L.R.P.; Suguio, K.; Barreto, A.M.F.; Bezerra, F.H.R

2003-05-01

Quartz and feldspar crystals were selected from the samples as eolic dunes, beach-rock and marine terraces, all collected in the coast area of Paraiba State, located in northeastern Brazil, in order to obtain ages of deposition of the sediments. It is a systematic study in the area. The results of the ages will be used in local sea-level changes study and a correlation between highstands of marine oxygen-isotopes stages will be made. Optically stimulated luminescence and thermoluminescence have been measured and the regeneration method with multiple aliquot protocol was applied to obtain the paleodose values. Preliminaries ages spanning 3.2-229 kyr were evaluated.

A comparison of economic evaluation models as applied to geothermal energy technology

Science.gov (United States)

Ziman, G. M.; Rosenberg, L. S.

1983-01-01

Several cost estimation and financial cash flow models have been applied to a series of geothermal case studies. In order to draw conclusions about relative performance and applicability of these models to geothermal projects, the consistency of results was assessed. The model outputs of principal interest in this study were net present value, internal rate of return, or levelized breakeven price. The models used were VENVAL, a venture analysis model; the Geothermal Probabilistic Cost Model (GPC Model); the Alternative Power Systems Economic Analysis Model (APSEAM); the Geothermal Loan Guarantee Cash Flow Model (GCFM); and the GEOCOST and GEOCITY geothermal models. The case studies to which the models were applied include a geothermal reservoir at Heber, CA; a geothermal eletric power plant to be located at the Heber site; an alcohol fuels production facility to be built at Raft River, ID; and a direct-use, district heating system in Susanville, CA.

Study of the influence of the metal partition coefficient on the human health risk evaluation, applied to Figueira (PR) soil region, using C-Soil model

International Nuclear Information System (INIS)

Camargo, Iara Maria Carneiro de.

2005-01-01

Studies of partition coefficient show that Kp values of metals can vary orders of magnitude according to the soil physical-chemistry characteristics. Therefore, the Kp is a sensible parameter in human health risk assessment model. In general, a default value is adopted by environmental agencies and often it is not represent suitably the soil studied and can cause errors in the risk calculation. The objectives of this work are: evaluate the heavy metals soil contamination around the Figueira coal-fired power plant; determine the metal Kp of As, Cd, Co, Cr, Cu, Mo, Ni, Pb and Zn in soil by the ratio between the metal concentration obtained by concentrate HNO 3 digestion and the metal concentration obtained by extraction with EDTA 0,05 mol L -1 (Kp EDTA ) or Ca(NO 3 ) 2 0,1 mol L -1 (Kp Ca(NO3)2 ); and evaluate the influence of the application of different Kp values in human health risk assessment C-Soil model in risk calculation. The main conclusions of the present study were: As, Cd, Mo, Pb e Zn were the Figueira soil metal contaminants, being As the pollutant of major human health concern; either Kp Ca(NO3)2 or Kp EDTA values could be used for human health risk calculation, in Figueira case, except for Pb, and the Kp EDTA values were preferably recommended due to the less dispersion of their values; the KpC Soil metals default values could be applied for the human health risk calculation in Figueira case, in other words, it would not have necessity to determine Kp values of region (Kp EDTA and Kp Ca(NO3)2 ), except to Pb. (author)

Economic evaluation of HTRs as applied to an oil industry

International Nuclear Information System (INIS)

Djokolelono, M.; Soedibjo, R.; Padmosoebroto, S.

1989-01-01

General design requirement pertinent to the applied oil field is presented. Economic calculation of HTRs application in the enhanced oil recovery was performed. It includes the consideration of the current structure as practised so far in the oil industry in Indonesia. Sensitivity studies were done to enlighten the influence of uncertainties related to the HTRs, i.e. capital costs, oil prices, depreciations, investment credits, domestic obligation, financing terms. (author). 3 refs, 4 figs

Methodological Proposal for Identification and Evaluation of Environmental Aspects and Impacts of IPEN Nuclear Facilities: A Case Study Applied to the Nuclear Fuel Center

International Nuclear Information System (INIS)

Mattos, Luis A. Terribile de; Filho, Tufic Madi; Meldonian, Nelson Leon

2013-06-01

This work presents an application of Failure Mode Effect Analysis (FMEA) to the process of identification of environmental aspects and impacts as a part of implementation and maintenance of an Environmental Management System (EMS) in accordance with the ISO 14001 standard. Also, it can contribute, as a complement, to the evaluation and improvement of safety of the installation focused. The study was applied to the Nuclear Fuel Center (CCN) of Nuclear and Energy Research Institute (IPEN), situated at the Campus of University of Sao Paulo, Brazil. The CCN facility has the objective of promoting scientific research and of producing nuclear fuel elements for the IEA-R1 Research Reactor. To identify the environmental aspects of the facility activities, products, and services, a systematic data collection was carried out by means of personal interviews, documents, reports and operation data records consulting. Furthermore, the processes and their interactions, failure modes, besides their causes and effects to the environment, were identified. As a result of a careful evaluation of these causes it was possible to identify and to classify the major potential environmental impacts, in order to set up and put in practice an Environmental Control Plan for the installation under study. The results have demonstrated the validity of the FMEA application to nuclear facility processes, identifying environmental aspects and impacts, whose controls are critical to achieve compliance with the environmental requirements of the Integrated Management System of IPEN. It was demonstrated that the methodology used in this work is a powerful management tool for resolving issues related to the conformity with applicable regulatory and legal requirements of the Brazilian Nuclear Energy Commission (CNEN) and the Brazilian Institute of Environment (IBAMA). (authors)

Business Ethics and Military Ethics ： A Study in Comparative Applied Ethics

OpenAIRE

Shaw, William H.

2012-01-01

In the past three decades, philosophers have delved into applied ethics, pursuing a surprisingly wide range of practically oriented normative questions, and a number of fields of applied ethical research and teaching are flourishing. There have, however, been few comparative studies of different fields in applied ethics, but such studies can, I believe, teach us something. Accordingly, this essay compares and contrasts business ethics and military ethics as distinct disciplinar...

Systematic Evaluation of Desmopressin Applied to the Patients with Aneurysmal Subarachnoid Haemorrhage in the light of the Literature.

Science.gov (United States)

Karaarslan, Numan; Yilmaz, Ibrahim; Akgun, Feride Sinem; Caliskan, Tezcan; Ozbek, Hanefi; Ates, Ozkan

2018-04-09

This study discusses the management of patients with the syndrome of inappropriate antidiuretic hormone secretion (SIADH), developed after subarachnoid hemorrhage, in a comparative manner in light of the literature. Without country or language restrictions, articles with high evidential value found in electronic databases were compared to our patients' data. After the literature review, three articles were included for systematic evaluation. Desmopressin was applied to the patients for the treatment of hyponatremia, volume contraction, and negative sodium balance caused by SIADH. However, it was not used for preventing re-bleeding. To prevent the development of this complication (SIADH), the use of desmopressin, an analogue of vasopressin, is important in routine clinical practice.

Study of water-repellent treatments applied on limestone from Andalusian Cathedrals

Directory of Open Access Journals (Sweden)

Villegas, R.

1991-09-01

Full Text Available Five types of stone used in Andalusian Cathedrals have been treated with different water-repellent treatments, to evaluate the effects of this products. The stones studied are limestone, calcarenite and dolomite; the products applied are organosilicones and acrylics. In this work properties related with water access and movement through the stone have been measured and compared their values before and after the application of the treatments.

Se han tratado varios tipos de piedra utilizados en Catedrales Andaluzas con diversos productos hidrófugos, con el fin de evaluar las características conferidas por los mismos. Los tipos de piedra son de naturaleza caliza, calcarenitas y dolomías; los productos son organosilícicos y acrílicos. En este trabajo se han medido las propiedades relacionadas con el acceso y movimiento de agua en la piedra, comparándose sus valores antes y después de la aplicación del tratamiento.

Southern African Linguistics and Applied Language Studies - Vol 31 ...

African Journals Online (AJOL)

Southern African Linguistics and Applied Language Studies. ... Object marking restrictions on Shona causative and applicative constructions · EMAIL ... A problem-oriented, form-focused course design for teaching isiZulu as an additional ...

Computer aided instrumented Charpy test applied dynamic fracture toughness evaluation system

International Nuclear Information System (INIS)

Kobayashi, Toshiro; Niinomi, Mitsuo

1986-01-01

Micro computer aided data treatment system and personal computer aided data analysis system were applied to the traditional instrumented Charpy impact test system. The analysis of Charpy absorbed energy (E i , E p , E t ) and load (P y , P m ), and the evaluation of dynamic toughness through whole fracture process, i.e. J Id , J R curve and T mat was examined using newly developed computer aided instrumented Charpy impact test system. E i , E p , E t , P y and P m were effectively analyzed using moving average method and printed out automatically by micro computer aided data treatment system. J Id , J R curve and T mat could be measured by stop block test method. Then, J Id , J R curve and T mat were effectively estimated using compliance changing rate method and key curve method on the load-load point displacement curve of single fatigue cracked specimen by personal computer aided data analysis system. (author)

Evaluation of research projects Perspectives for applied research in food and agriculture

DEFF Research Database (Denmark)

Pedersen, S.M.; Boesen, M.V.; Baker, D.

2011-01-01

In this study, the task of evaluating research projects’ relevance and scientific quality is addressed, and a pilot study is executed for five Danish food and agricultural research programmes. Literature reviewed emphasises the importance of context, of consistency and transparency and of the cost...... of evaluation. Moreover, the purpose of research evaluation is thoroughly examined. The method developed and implemented addresses each of these concerns, particularly by employing simple measures and by complementing quantitative analysis with qualitative exercises featuring structured stakeholder interviews...

Meta-evaluation of published studies on evaluation of health disaster preparedness exercises through a systematic review.

Science.gov (United States)

Sheikhbardsiri, Hojjat; Yarmohammadian, Mohammad H; Khankeh, Hamid Reza; Nekoei-Moghadam, Mahmoud; Raeisi, Ahmad Reza

2018-01-01

Exercise evaluation is one of the most important steps and sometimes neglected in designing and taking exercises, in this stage of exercise, it systematically identifying, gathering, and interpreting related information to indicate how an exercise has fulfilled its objectives. The present study aimed to assess the most important evaluation techniques applied in evaluating health exercises for emergencies and disasters. This was meta-evaluation study through a systematic review. In this research, we searched papers based on specific and relevant keywords in research databases including ISI web of science, PubMed, Scopus, Science Direct, Ovid, ProQuest, Wiley, Google Scholar, and Persian database such as ISC and SID. The search keywords and strategies are followed; "simulation," "practice," "drill," "exercise," "instrument," "tool," "questionnaire," " measurement," "checklist," "scale," "test," "inventory," "battery," "evaluation," "assessment," "appraisal," "emergency," "disaster," "cricise," "hazard," "catastrophe,: "hospital", "prehospital," "health centers," "treatment centers," were used in combination with Boolean operators OR and AND. The research findings indicate that there are different techniques and methods for data collection to evaluate performance exercises of health centers and affiliated organizations in disasters and emergencies including debriefing inventories, self-report, questionnaire, interview, observation, shooting video, and photographing, electronic equipment which can be individually or collectively used depending on exercise objectives or purposes. Taking exercise in the health sector is one of the important steps in preparation and implementation of disaster risk management programs. This study can be thus utilized to improve preparedness of different sectors of health system according to the latest available evaluation techniques and methods for better implementation of disaster exercise evaluation stages.

Efficiency evaluation for nanomaterials applied in well bottom zone treatment after completion of well construction

Directory of Open Access Journals (Sweden)

GREZINA Olga Anatolyevna,

2017-11-01

Full Text Available Efficient development of low production wells is not possible without the bottom zone treatment, both during the well development phase when its construction is completed and in the process of flow rate reduction during the operation phase. The efficiency evaluation for the new technology, including one in which nanomaterials are used, implies comparison of the actual level achieved after the new technology has been applied with the projected baseline level that might be achieved by the previously applied technique. The paper presents geological and statistical modeling of the bottom zone acid-implosion treatment performed with the hydrochloric acid solution in combination with the shock-wave effect characterized by cyclic recurrence and dynamic mode. The analyzed results have been achieved in the low permeable carbonate reservoir of a very complex geological structure in oil operating facility. The nature and the extent of geological-technological parameters influence on the acidimplosion treatment results were determined by the multiple regression method, and the most influential parameters were selected; recommendations for boreholes selection and technological parameters of treatment were made. Models to forecast flow rate and oil production growth, reduction of fractional oil content in the well production, the acid-implosion impact duration were elaborated. The models can be used to evaluate efficiency of bottom zone treatment technologies after completion of well construction with nanomaterials application.

DETERMINATION OF IMPORTANCE EVALUATION FOR THE SUBSURFACE EXPLORATORY STUDIES FACILITY

International Nuclear Information System (INIS)

Clark, W.J.

1999-01-01

This Determination of Importance Evaluation (DIE) applies to the Subsurface Exploratory Studies Facility (ESF), encompassing the Topopah Spring (TS) Loop from Station 0+00 meters (m) at the North Portal to breakthrough at the South Portal (approximately 78+77 m), the Enhanced Characterization of the Repository Block (ECRB) East-West Cross Drift Starter Tunnel (to approximate ECRB Station 0+26 m), and ancillary test and operation support areas in the TS Loop. This evaluation applies to the construction, operation, and maintenance of these excavations. A more detailed description of these items is provided in Section 6.0. Testing activities are not evaluated in this DIE. Certain construction activities with respect to testing activities are evaluated; but the testing activities themselves are not evaluated. The DIE for ESF Subsurface Testing Activities (BAJ3000000-01717-2200-000111) (CRWMS M and O 1998a) evaluates Subsurface ESF Testing activities. The construction, operation, and maintenance of the TS Loop niches and alcove slot cuts is evaluated herein and is also discussed in CRWMS M and O 1998a. The construction, operation, and maintenance of the Busted Butte subsurface test area in support of the Unsaturated Zone (UZ) Transport Test is evaluated in CRWMS M and O 1998a. Potential test-to-test interference and the waste isolation impacts of testing activities are evaluated in the ESF Subsurface Testing Activities DIE and other applicable evaluation(s) for the Job Package (JP), Test Planning Package (TPP), and/or Field Work Package (FWP). The objectives of this DIE are to determine whether the Subsurface ESF TS Loop and associated excavations, including activities associated with their construction and operation, potentially impact site characterization testing or the waste isolation capabilities of the site. Controls needed to limit any potential impacts are identified. The validity and veracity of the individual tests, including data collection, are the

DETERMINATION OF IMPORTANCE EVALUATION FOR THE SUBSURFACE EXPORATORY STUDIES FACILITY

Energy Technology Data Exchange (ETDEWEB)

W.J. Clark

1999-06-28

This Determination of Importance Evaluation (DIE) applies to the Subsurface Exploratory Studies Facility (ESF), encompassing the Topopah Spring (TS) Loop from Station 0+00 meters (m) at the North Portal to breakthrough at the South Portal (approximately 78+77 m), the Enhanced Characterization of the Repository Block (ECRB) East-West Cross Drift Starter Tunnel (to approximate ECRB Station 0+26 m), and ancillary test and operation support areas in the TS Loop. This evaluation applies to the construction, operation, and maintenance of these excavations. A more detailed description of these items is provided in Section 6.0. Testing activities are not evaluated in this DIE. Certain construction activities with respect to testing activities are evaluated; but the testing activities themselves are not evaluated. The DIE for ESF Subsurface Testing Activities (BAJ3000000-01717-2200-00011 Rev 01) (CRWMS M&O 1998a) evaluates Subsurface ESF Testing activities. The construction, operation, and maintenance of the TS Loop niches and alcove slot cuts is evaluated herein and is also discussed in CRWMS M&O 1998a. The construction, operation, and maintenance of the Busted Butte subsurface test area in support of the Unsaturated Zone (UZ) Transport Test is evaluated in CRWMS M&O 1998a. Potential test-to-test interference and the waste isolation impacts of testing activities are evaluated in the ESF Subsurface Testing Activities DIE and other applicable evaluation(s) for the Job Package (JP), Test Planning Package (TPP), and/or Field Work Package (FWP). The objectives of this DIE are to determine whether the Subsurface ESF TS Loop and associated excavations, including activities associated with their construction and operation, potentially impact site characterization testing or the waste isolation capabilities of the site. Controls needed to limit any potential impacts are identified. The validity and veracity of the individual tests, including data collection, are the responsibility

Study on Mechanism Experiments and Evaluation Methods for Water Eutrophication

Directory of Open Access Journals (Sweden)

Jiabin Yu

2017-01-01

Full Text Available The process of water eutrophication involves the interaction of external factors, nutrients, microorganisms, and other factors. It is complex and has not yet been effectively studied. To examine the formation process of water eutrophication, a set of orthogonal experiments with three factors and four levels is designed to analyze the key factors. At the same time, with the help of a large amount of monitoring data, the principal component analysis method is used to extract the main components of water eutrophication and determine the effective evaluation indicators of eutrophication. Finally, the Bayesian theory of uncertainty is applied to the evaluation of the eutrophication process to evaluate the sample data. The simulation results demonstrate the validity of the research method.

Study of evaluation techniques of software configuration management and reliability

Energy Technology Data Exchange (ETDEWEB)

Youn, Cheong; Baek, Y. W.; Kim, H. C.; Han, H. C.; Choi, C. R. [Chungnam National Univ., Taejon (Korea, Republic of)

2001-03-15

The Study of activities to solve software safety and quality must be executed in base of establishing software development process for digitalized nuclear plant. Especially study of software testing and Verification and Validation must executed. For this purpose methodologies and tools which can improve software qualities are evaluated and software Testing, V and V and Configuration Management which can be applied to software life cycle are investigated. This study establish a guideline that can be used to assure software safety and reliability requirements in digitalized nuclear plant systems.

Evaluation of energy response of neutron rem monitor applied to high-energy accelerator facilities

Energy Technology Data Exchange (ETDEWEB)

Nakane, Yoshihiro; Harada, Yasunori; Sakamoto, Yukio [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment] [and others

2003-03-01

A neutron rem monitor was newly developed for applying to the high-intensity proton accelerator facility (J-PARC) that is under construction as a joint project between the Japan Atomic Energy Research Institute and the High Energy Accelerator Research Organization. To measure the dose rate accurately for wide energy range of neutrons from thermal to high-energy region, the neutron rem monitor was fabricated by adding a lead breeder layer to a conventional neutron rem monitor. The energy response of the monitor was evaluated by using neutron transport calculations for the energy range from thermal to 150 MeV. For verifying the results, the response was measured at neutron fields for the energy range from thermal to 65 MeV. The comparisons between the energy response and dose conversion coefficients show that the newly developed neutron rem monitor has a good performance in energy response up to 150 MeV, suggesting that the present study offered prospects of a practical fabrication of the rem monitor applicable to the high intensity proton accelerator facility. (author)

Study on advanced nuclear power plants expert evaluation system in China

International Nuclear Information System (INIS)

Zhang Qi; Yoshikawa, Hidekazu; Shimoda, Hiroshi; Zhou Zhiwei; Zhu Shutang; Ren Junsheng; Yang Mengjia; Gu Junyang

2005-01-01

Based on current status and developing trend of nuclear power plant technology, an evaluation software system is developed to assess advanced NPPs systematically according to a set of pre-established evaluation indices. The selection and classification of the indices, the determination of their weighting factors in applying AHP (analytic hierarchy process) method are discussed. The Fuzzy Comprehensive method and the Fuzzy Borda Number method are studied in detail. The original input data required by the evaluation system are deduced from the expert survey sheets Evaluation results with common significance of public attraction are discussed and analyzed according to the opinions of different experts grouped by age, profession and working expertise etc. The evaluation system is computer network based with high flexible and user friendly human-machine interface on which it is easy to manipulate and update the evaluation system, and to display evaluation results as well. (author)

Applying the chronicle workshop as a method for evaluating participatory interventions

DEFF Research Database (Denmark)

Poulsen, Signe; Ipsen, Christine; Gish, Liv

2015-01-01

Despite the growing interest for process evaluation in participatory interventions, studies examining specific methods for process evaluation are lacking. In this paper, we propose a new method for process evaluation – the chronicle workshop. The chronicle workshop has not previously been used...... productivity and well-being. In all cases, we saw that the chronicle workshop gave valuable information about the intervention process and that it initiated a joint reflection among participants from different departments. The chronicle workshop makes it possible to better understand the results...

Photoacoustic evaluation of the penetration of piroxicam gel applied with phonophoresis into human skin

International Nuclear Information System (INIS)

Silveira, F L F D; Barja, P R; Acosta-Avalos, D

2010-01-01

The photoacoustic (PA) technique has been increasingly employed in biomedical studies, allowing in vivo skin measurements not easily performed with other techniques. It is possible to use PA measurements to evaluate transdermal delivery of products topically applied through manual massage or phonophoresis, that is the utilization of ultrasound waves to enhance drug absorption. The aim of this study was to analyze the influence of the period of phonophoresis application in the transdermal penetration of piroxicam gel. In vivo PA measurements employed a tungsten lamp as light source and a thin aluminum foil closing the PA chamber. The PA signals of the arm (i) clean; and (ii) after phonophoresis were utilized to estimate the concentration of piroxicam into skin. For all (4) volunteers, drug concentration in skin after phonophoresis application was the same for the different application times employed; in this way, phonophoresis for one minute seemed to be sufficient to enhance piroxicam penetration into skin. The actual amount of drug delivered into tissue depends on the person, suggesting a dependency with the skin type, which affects the PA signal level [2]. We conclude that drug delivery depends not only on the application method, but also on the specific skin type.

Photoacoustic evaluation of the penetration of piroxicam gel applied with phonophoresis into human skin

Energy Technology Data Exchange (ETDEWEB)

Silveira, F L F D; Barja, P R [Research and Development Institute, UNIVAP, Av. Shishima Hifumi 2911, Sao Jose dos Campos, SP, 12209-010 (Brazil); Acosta-Avalos, D, E-mail: barja@univap.b [Centro Brasileiro de Pesquisas Fisicas (CBPF), R.Xavier Sigaud 150, Rio de Janeiro, RJ, 22290-180 (Brazil)

2010-03-01

The photoacoustic (PA) technique has been increasingly employed in biomedical studies, allowing in vivo skin measurements not easily performed with other techniques. It is possible to use PA measurements to evaluate transdermal delivery of products topically applied through manual massage or phonophoresis, that is the utilization of ultrasound waves to enhance drug absorption. The aim of this study was to analyze the influence of the period of phonophoresis application in the transdermal penetration of piroxicam gel. In vivo PA measurements employed a tungsten lamp as light source and a thin aluminum foil closing the PA chamber. The PA signals of the arm (i) clean; and (ii) after phonophoresis were utilized to estimate the concentration of piroxicam into skin. For all (4) volunteers, drug concentration in skin after phonophoresis application was the same for the different application times employed; in this way, phonophoresis for one minute seemed to be sufficient to enhance piroxicam penetration into skin. The actual amount of drug delivered into tissue depends on the person, suggesting a dependency with the skin type, which affects the PA signal level [2]. We conclude that drug delivery depends not only on the application method, but also on the specific skin type.

32 CFR 37.1220 - Applied research.

Science.gov (United States)

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false Applied research. 37.1220 Section 37.1220... REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Definitions of Terms Used in This Part § 37.1220 Applied research..., Development, Test and Evaluation programs within Budget Activity 2, Applied Research (also known informally as...

Recent developments and evaluation of selected geochemical techniques applied to uranium exploration

International Nuclear Information System (INIS)

Wenrich-Verbeek, K.J.; Cadigan, R.A.; Felmlee, J.K.; Reimer, G.M.; Spirakis, C.S.

1976-01-01

Various geochemical techniques for uranium exploration are currently under study by the geochemical techniques team of the Branch of Uranium and Thorium Resources, US Geological Survey. Radium-226 and its parent uranium-238 occur in mineral spring water largely independently of the geochemistry of the solutions and thus are potential indicators of uranium in source rocks. Many radioactive springs, hot or cold, are believed to be related to hydrothermal systems which contain uranium at depth. Radium, when present in the water, is co-precipitated in iron and/or manganese oxides and hydroxides or in barium sulphate associated with calcium carbonate spring deposits. Studies of surface water samples have resulted in improved standardized sample treatment and collection procedures. Stream discharge has been shown to have a significant effect on uranium concentration, while conductivity shows promise as a ''pathfinder'' for uranium. Turbid samples behave differently and consequently must be treated with more caution than samples from clear streams. Both water and stream sediments should be sampled concurrently, as anomalous uranium concentrations may occur in only one of these media and would be overlooked if only one, the wrong one, were analysed. The fission-track technique has been applied to uranium determinations in the above water studies. The advantages of the designed sample collecting system are that only a small quantity, typically one drop, of water is required and sample manipulation is minimized, thereby reducing contamination risks. The fission-track analytical technique is effective at the uranium concentration levels commonly found in natural waters (5.0-0.01 μg/litre). Landsat data were used to detect alteration associated with uranium deposits. Altered areas were detected but were not uniquely defined. Nevertheless, computer processing of Landsat data did suggest a smaller size target for further evaluation and thus is useful as an exploration tool

A mixed methods evaluation of team-based learning for applied pathophysiology in undergraduate nursing education.

Science.gov (United States)

Branney, Jonathan; Priego-Hernández, Jacqueline

2018-02-01

It is important for nurses to have a thorough understanding of the biosciences such as pathophysiology that underpin nursing care. These courses include content that can be difficult to learn. Team-based learning is emerging as a strategy for enhancing learning in nurse education due to the promotion of individual learning as well as learning in teams. In this study we sought to evaluate the use of team-based learning in the teaching of applied pathophysiology to undergraduate student nurses. A mixed methods observational study. In a year two, undergraduate nursing applied pathophysiology module circulatory shock was taught using Team-based Learning while all remaining topics were taught using traditional lectures. After the Team-based Learning intervention the students were invited to complete the Team-based Learning Student Assessment Instrument, which measures accountability, preference and satisfaction with Team-based Learning. Students were also invited to focus group discussions to gain a more thorough understanding of their experience with Team-based Learning. Exam scores for answers to questions based on Team-based Learning-taught material were compared with those from lecture-taught material. Of the 197 students enrolled on the module, 167 (85% response rate) returned the instrument, the results from which indicated a favourable experience with Team-based Learning. Most students reported higher accountability (93%) and satisfaction (92%) with Team-based Learning. Lectures that promoted active learning were viewed as an important feature of the university experience which may explain the 76% exhibiting a preference for Team-based Learning. Most students wanted to make a meaningful contribution so as not to let down their team and they saw a clear relevance between the Team-based Learning activities and their own experiences of teamwork in clinical practice. Exam scores on the question related to Team-based Learning-taught material were comparable to those

Uncertainty-driven nuclear data evaluation including thermal (n,α) applied to 59Ni

Science.gov (United States)

Helgesson, P.; Sjöstrand, H.; Rochman, D.

2017-11-01

This paper presents a novel approach to the evaluation of nuclear data (ND), combining experimental data for thermal cross sections with resonance parameters and nuclear reaction modeling. The method involves sampling of various uncertain parameters, in particular uncertain components in experimental setups, and provides extensive covariance information, including consistent cross-channel correlations over the whole energy spectrum. The method is developed for, and applied to, 59Ni, but may be used as a whole, or in part, for other nuclides. 59Ni is particularly interesting since a substantial amount of 59Ni is produced in thermal nuclear reactors by neutron capture in 58Ni and since it has a non-threshold (n,α) cross section. Therefore, 59Ni gives a very important contribution to the helium production in stainless steel in a thermal reactor. However, current evaluated ND libraries contain old information for 59Ni, without any uncertainty information. The work includes a study of thermal cross section experiments and a novel combination of this experimental information, giving the full multivariate distribution of the thermal cross sections. In particular, the thermal (n,α) cross section is found to be 12.7 ± . 7 b. This is consistent with, but yet different from, current established values. Further, the distribution of thermal cross sections is combined with reported resonance parameters, and with TENDL-2015 data, to provide full random ENDF files; all of this is done in a novel way, keeping uncertainties and correlations in mind. The random files are also condensed into one single ENDF file with covariance information, which is now part of a beta version of JEFF 3.3. Finally, the random ENDF files have been processed and used in an MCNP model to study the helium production in stainless steel. The increase in the (n,α) rate due to 59Ni compared to fresh stainless steel is found to be a factor of 5.2 at a certain time in the reactor vessel, with a relative

Thermoeconomic studies applied to maintenance of power plants

International Nuclear Information System (INIS)

Carvalho, F.R.; Horta Nogueira, L.A.

1996-01-01

The thermoeconomic method is an important tool aiming to improve maintenance activities in steam power plants, becoming possible to share the irreversibilities costs to each equipment, as boilers, turbines and heat exchangers. Furthermore, the effects related to changes in operational and design parameters can be studied in a detailed way, evaluating the local and distributed effects. In this work, after a brief review of power plant maintenance costs concepts and values, one address a methodology for maintenance costs estimation and develops a case study of thermoeconomics of a hypothetical plant, presenting the exergy flows, exergy losses and maintenance costs distribution. Also is presented an evaluation of exergoeconomic maintenance cost, evaluating their significance, at equipment level, related to overall maintenance cost, aiming to help the maintenance activities planning. 10 refs, 3 figs, 12 tabs

An Empirical Study on Low-Carbon: Human Resources Performance Evaluation

Directory of Open Access Journals (Sweden)

Quan Chen

2018-01-01

Full Text Available Low-carbon logistics meets the requirements of a low-carbon economy and is the most effective operating model for logistic development to achieve sustainability by coping with severe energy consumption and global warming. Low-carbon logistics aims to reduce carbon intensity rather than simply reduce energy consumption and carbon emissions. Human resources are an important part of the great competition in the logistics market and significantly affect the operations of enterprises. Performance evaluations of human resources are particularly important for low-carbon logistics enterprises with scarce talents. Such evaluations in these enterprises are of great significance for their strategic development. This study constructed a human resource performance evaluation system to assess non-managerial employees’ low-carbon job capacity, job performance, and job attitude in the low-carbon logistics sector. The case study results revealed that the investigated company enjoyed initial success after having promoted low-carbon concepts and values to its non-managerial employees, and the success was demonstrated by excellent performance in its employees’ job attitude and knowledge. This study adopts the AHP method to reasonably determine an indicator system of performance evaluation and its weight to avoid certain human-caused bias. This study not only fills the gap in the related literature, but can also be applied to industrial practice.

An Empirical Study on Low-Carbon: Human Resources Performance Evaluation

Science.gov (United States)

Chen, Quan; Tsai, Sang-Bing; Zhou, Jie; Yu, Jian; Chang, Li-Chung; Li, Guodong; Zheng, Yuxiang; Wang, Jiangtao

2018-01-01

Low-carbon logistics meets the requirements of a low-carbon economy and is the most effective operating model for logistic development to achieve sustainability by coping with severe energy consumption and global warming. Low-carbon logistics aims to reduce carbon intensity rather than simply reduce energy consumption and carbon emissions. Human resources are an important part of the great competition in the logistics market and significantly affect the operations of enterprises. Performance evaluations of human resources are particularly important for low-carbon logistics enterprises with scarce talents. Such evaluations in these enterprises are of great significance for their strategic development. This study constructed a human resource performance evaluation system to assess non-managerial employees’ low-carbon job capacity, job performance, and job attitude in the low-carbon logistics sector. The case study results revealed that the investigated company enjoyed initial success after having promoted low-carbon concepts and values to its non-managerial employees, and the success was demonstrated by excellent performance in its employees’ job attitude and knowledge. This study adopts the AHP method to reasonably determine an indicator system of performance evaluation and its weight to avoid certain human-caused bias. This study not only fills the gap in the related literature, but can also be applied to industrial practice. PMID:29301375

An Empirical Study on Low-Carbon: Human Resources Performance Evaluation.

Science.gov (United States)

Chen, Quan; Tsai, Sang-Bing; Zhai, Yuming; Zhou, Jie; Yu, Jian; Chang, Li-Chung; Li, Guodong; Zheng, Yuxiang; Wang, Jiangtao

2018-01-03

Low-carbon logistics meets the requirements of a low-carbon economy and is the most effective operating model for logistic development to achieve sustainability by coping with severe energy consumption and global warming. Low-carbon logistics aims to reduce carbon intensity rather than simply reduce energy consumption and carbon emissions. Human resources are an important part of the great competition in the logistics market and significantly affect the operations of enterprises. Performance evaluations of human resources are particularly important for low-carbon logistics enterprises with scarce talents. Such evaluations in these enterprises are of great significance for their strategic development. This study constructed a human resource performance evaluation system to assess non-managerial employees' low-carbon job capacity, job performance, and job attitude in the low-carbon logistics sector. The case study results revealed that the investigated company enjoyed initial success after having promoted low-carbon concepts and values to its non-managerial employees, and the success was demonstrated by excellent performance in its employees' job attitude and knowledge. This study adopts the AHP method to reasonably determine an indicator system of performance evaluation and its weight to avoid certain human-caused bias. This study not only fills the gap in the related literature, but can also be applied to industrial practice.

Applied research of environmental monitoring using instrumental neutron activation analysis

Energy Technology Data Exchange (ETDEWEB)

Chung, Young Sam; Moon, Jong Hwa; Chung, Young Ju

1997-08-01

This technical report is written as a guide book for applied research of environmental monitoring using Instrumental Neutron Activation Analysis. The contents are as followings; sampling and sample preparation as a airborne particulate matter, analytical methodologies, data evaluation and interpretation, basic statistical methods of data analysis applied in environmental pollution studies. (author). 23 refs., 7 tabs., 9 figs.

Applying the Quadruple Process model to evaluate change in implicit attitudinal responses during therapy for panic disorder.

Science.gov (United States)

Clerkin, Elise M; Fisher, Christopher R; Sherman, Jeffrey W; Teachman, Bethany A

2014-01-01

This study explored the automatic and controlled processes that may influence performance on an implicit measure across cognitive-behavioral group therapy for panic disorder. The Quadruple Process model was applied to error scores from an Implicit Association Test evaluating associations between the concepts Me (vs. Not Me) + Calm (vs. Panicked) to evaluate four distinct processes: Association Activation, Detection, Guessing, and Overcoming Bias. Parameter estimates were calculated in the panic group (n = 28) across each treatment session where the IAT was administered, and at matched times when the IAT was completed in the healthy control group (n = 31). Association Activation for Me + Calm became stronger over treatment for participants in the panic group, demonstrating that it is possible to change automatically activated associations in memory (vs. simply overriding those associations) in a clinical sample via therapy. As well, the Guessing bias toward the calm category increased over treatment for participants in the panic group. This research evaluates key tenets about the role of automatic processing in cognitive models of anxiety, and emphasizes the viability of changing the actual activation of automatic associations in the context of treatment, versus only changing a person's ability to use reflective processing to overcome biased automatic processing. Copyright © 2013 Elsevier Ltd. All rights reserved.

Dielectric spectroscopy technique applied to study the behaviour of irradiated polymer

International Nuclear Information System (INIS)

Saoud, R.; Soualmia, A.; Guerbi, C.A.; Benrekaa, N.

2006-01-01

Relaxation spectroscopy provides an excellent method for the study of motional processes in materials and has been widely applied to macromolecules and polymers. The technique is potentially of most interest when applied to irradiated systems. Application to the study of the structure beam-irradiated Teflon is thus an outstanding opportunity for the dielectric relaxation technique, particularly as this material exhibits clamping problems when subjected to dynamic mechanical relaxation studies. A very wide frequency range is necessary to resolve dipolar effects. In this paper, we discuss some significant results about the behavior and the modification of the structure of Teflon submitted to weak energy radiations

Subdermal penetration of topically applied clobetasol propionate in ointment base through intact human skin

DEFF Research Database (Denmark)

Petersen, Lars Jelstrup; Sindrup, J H; Kristensen, J K

1992-01-01

Some data have demonstrated a substantial subdermal accumulation of topically applied drugs in animals. The aim of this study was to evaluate a possible effect of epicutaneously applied clobetasol propionate on blood flow in human subcutaneous adipose tissue. Nine healthy subjects were studied...

A study on the performance evaluation of small gamma camera collimators using detective quantun efficiency

International Nuclear Information System (INIS)

Jeon, Ho Sang

2008-02-01

The anger-type gamma camera and novel marker compound using Tc-99m were firstly introduced in 1963. The gamma camera systems have being improved and applied to various fields, for example, medical, industrial, and environmental fields. Gamma camera is mainly composed of collimator, detector, and signal processor. And the radiative source is namely the imaging object. The collimator is essential component of gamma camera system because the imaging performance of system is mainly dependent on the collimator. The performance evaluation of collimators can be done by using evaluating factors. In this study, the novel factors for gamma camera evaluation are suggested. The established evaluating factors by NEMA are FWHM, sensitivity, and uniformity. They have some limitations in spite of their usefulness. Firstly, performance evaluation by those factors give insensitive and indirect results only. Secondly, the evaluation of noise property is ambiguous. Thirdly, there is no synthetic evaluation of system performance. Simulation with Monte Carlo code and experiment with a small camera camera were simultaenuously performed to verify novel evaluating factors. For the evaluation of spatial resolution, MTF was applied instead of FWHM. The MTF values presents excellent linear relationship with FWHM values. The NNPS was applied instead of uniformity and sensitivity for the evaluation of noise fluctuation. The NNPS values also presents linear relationship with sensitivity and unifomity. Moreover, these novel factors give quantities as the function of spatial frequencies. Finally, the DQE values were given by calculations with MTF, NNPS, and input SNR. DQE effectively presents the synthetic evaluation of gamma camera performance. It is the conclusion that MTF, NNPS, and DQE can be novel evaluating factors for gamma camera systems and the new factor for synthetic evaluation is derived

Applying accreditation standards in a self-evaluation process: The experience of Educational Development Center of Tehran University of Medical Sciences

Directory of Open Access Journals (Sweden)

A Mirzazadeh

2016-03-01

Full Text Available Introduction: Educational Development Centers (EDCs, as the coordinator in education development in Medical Sciences universities, in order to improve their quality should evaluate their activities. In spite of remarkable performance of Tehran University of Medical Sciences (TUMS EDC in previous national rankings, but it faces many challenges and problems. This paper provided the process, results and lessons learned from a self-evaluation experience conducted at TUMS EDC based on accreditation standards. Method: The present study is an Institutional self-evaluation study based on the national accreditation standards of EDCs (2012. Data were gathered using an open-ended questionnaire developed on the basis of the SWOT format. A directional content analysis applied to analyze the data. Results: In total, 84 point of strengths, 87 weaknesses, 15 opportunities, 24 threats and also 99 recommendations for quality improvement were reported. The most important strengths of the center were the existence of an established mechanism regarding research process in education and scholarship of education, holding various faculty development courses and training standardized patient. The most important weaknesses were the lack of specified procedures in some areas such as monitoring the planning and reviewing of educational programs in the field of educational programs and evaluation of empowerment courses. Conclusion: The present evaluation results will be useful in directing future policies of TUMS EDC such as revising its strategic planning. We hope that the current experience can be helpful for administrators in EDCs in the Ministry of Health and Medical Education and also other Medical Sciences Universities.

Applying the natural disasters vulnerability evaluation model to the March 2011 north-east Japan earthquake and tsunami.

Science.gov (United States)

Ruiz Estrada, Mario Arturo; Yap, Su Fei; Park, Donghyun

2014-07-01

Natural hazards have a potentially large impact on economic growth, but measuring their economic impact is subject to a great deal of uncertainty. The central objective of this paper is to demonstrate a model--the natural disasters vulnerability evaluation (NDVE) model--that can be used to evaluate the impact of natural hazards on gross national product growth. The model is based on five basic indicators-natural hazards growth rates (αi), the national natural hazards vulnerability rate (ΩT), the natural disaster devastation magnitude rate (Π), the economic desgrowth rate (i.e. shrinkage of the economy) (δ), and the NHV surface. In addition, we apply the NDVE model to the north-east Japan earthquake and tsunami of March 2011 to evaluate its impact on the Japanese economy. © 2014 The Author(s). Disasters © Overseas Development Institute, 2014.

Review of GIF PR and PP Evaluation Case Study for Application to Pyroprocessing

Energy Technology Data Exchange (ETDEWEB)

Kim, H. M.; Ahn, S. K.; Kwon, E. H.; Kim, H. D. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

This paper has summarized and reviewed the ESFR case study, as it relates to the application of the evaluation methods to pyroprocessing facilities as well as the sodium fast reactor fuel cycle in the future as a self-assessment study. The GIF PR and PP evaluation methodology and the case study both addressed physical protection, but this paper focuses only on proliferation resistance. It does not consider physical protection. The Generation IV International Forum (GIF) emphasizes proliferation resistance and physical protection (PR and PP) as one of the main aspects to be considered regarding future nuclear energy systems (NESs). As such, the PR and PP Working Group developed an evaluation methodology and applied it to the Example Sodium Fast Reactor (ESFR) as a case study. This paper has summarized and reviewed the ESFR case study, as it relates to the application of the evaluation methods to pyroprocessing facilities as well as the sodium fast reactor fuel cycle in the future as a self-assessment study. The GIF PR and PP evaluation methodology and the case study both addressed physical protection, but this paper focuses only on proliferation resistance. It does not consider physical protection.

Review of GIF PR and PP Evaluation Case Study for Application to Pyroprocessing

International Nuclear Information System (INIS)

Kim, H. M.; Ahn, S. K.; Kwon, E. H.; Kim, H. D.

2014-01-01

This paper has summarized and reviewed the ESFR case study, as it relates to the application of the evaluation methods to pyroprocessing facilities as well as the sodium fast reactor fuel cycle in the future as a self-assessment study. The GIF PR and PP evaluation methodology and the case study both addressed physical protection, but this paper focuses only on proliferation resistance. It does not consider physical protection. The Generation IV International Forum (GIF) emphasizes proliferation resistance and physical protection (PR and PP) as one of the main aspects to be considered regarding future nuclear energy systems (NESs). As such, the PR and PP Working Group developed an evaluation methodology and applied it to the Example Sodium Fast Reactor (ESFR) as a case study. This paper has summarized and reviewed the ESFR case study, as it relates to the application of the evaluation methods to pyroprocessing facilities as well as the sodium fast reactor fuel cycle in the future as a self-assessment study. The GIF PR and PP evaluation methodology and the case study both addressed physical protection, but this paper focuses only on proliferation resistance. It does not consider physical protection

Benefits of applying a proxy eligibility period when using electronic health records for outcomes research: a simulation study.

Science.gov (United States)

Yu, Tzy-Chyi; Zhou, Huanxue

2015-06-09

Electronic health records (EHRs) can provide valuable data for outcomes research. However, unlike administrative claims databases, EHRs lack eligibility tables or a standard way to define the benefit coverage period, which could lead to underreporting of healthcare utilization or outcomes, and could result in surveillance bias. We tested the effect of using a proxy eligibility period (eligibility proxy) when estimating a range of health resource utilization and outcomes parameters under varying degrees of missing encounter data. We applied an eligibility proxy to create a benchmark cohort of chronic obstructive pulmonary disease (COPD) patients with 12 months of follow-up, with the assumption of no missing encounter data. The benchmark cohort provided parameter estimates for comparison with 9,000 simulated datasets representing 10-90% of COPD patients (by 10th percentiles) with between 1 and 11 months of continuous missing data. Two analyses, one for datasets using an eligibility proxy and one for those without an eligibility proxy, were performed on the 9,000 datasets to assess estimator performance under increasing levels of missing data. Estimates for each study variable were compared with those from the benchmark dataset, and performance was evaluated using bias, percentage change, and root-mean-square error. The benchmark dataset contained 6,717 COPD patients, whereas the simulated datasets where the eligibility proxy was applied had between 671 and 6,045 patients depending on the percentage of missing data. Parameter estimates had better performance when an eligibility proxy based on the first and last month of observed activity was applied. This finding was consistent across a range of variables representing patient comorbidities, symptoms, outcomes, health resource utilization, and medications, regardless of the measures of performance used. Without the eligibility proxy, all evaluated parameters were consistently underestimated. In a large COPD patient

Evaluating Pillar Industry's Transformation Capability: A Case Study of Two Chinese Steel-Based Cities.

Science.gov (United States)

Li, Zhidong; Marinova, Dora; Guo, Xiumei; Gao, Yuan

2015-01-01

Many steel-based cities in China were established between the 1950s and 1960s. After more than half a century of development and boom, these cities are starting to decline and industrial transformation is urgently needed. This paper focuses on evaluating the transformation capability of resource-based cities building an evaluation model. Using Text Mining and the Document Explorer technique as a way of extracting text features, the 200 most frequently used words are derived from 100 publications related to steel- and other resource-based cities. The Expert Evaluation Method (EEM) and Analytic Hierarchy Process (AHP) techniques are then applied to select 53 indicators, determine their weights and establish an index system for evaluating the transformation capability of the pillar industry of China's steel-based cities. Using real data and expert reviews, the improved Fuzzy Relation Matrix (FRM) method is applied to two case studies in China, namely Panzhihua and Daye, and the evaluation model is developed using Fuzzy Comprehensive Evaluation (FCE). The cities' abilities to carry out industrial transformation are evaluated with concerns expressed for the case of Daye. The findings have policy implications for the potential and required industrial transformation in the two selected cities and other resource-based towns.

Describing model of empowering managers by applying structural equation modeling: A case study of universities in Ardabil

Directory of Open Access Journals (Sweden)

Maryam Ghahremani Germi

2015-06-01

Full Text Available Empowerment is still on the agenda as a management concept and has become a widely used management term in the last decade or so. The purpose of this research was describing model of empowering managers by applying structural equation modeling (SEM at Ardabil universities. Two hundred and twenty managers of Ardabil universities including chancellors, managers, and vice presidents of education, research, and studies participated in this study. Clear and challenging goals, evaluation of function, access to resources, and rewarding were investigated. The results indicated that the designed SEM for empowering managers at university reflects a good fitness level. As it stands out, the conceptual model in the society under investigation was used appropriately. Among variables, access to resources with 88 per cent of load factor was known as the affective variable. Evaluation of function containing 51 per cent of load factor was recognized to have less effect. Results of average rating show that evaluation of function and access to resources with 2.62 coefficients stand at first level. Due to this, they had great impact on managers' empowerment. The results of the analysis provided compelling evidence that model of empowering managers was desirable at Ardabil universities.

Evaluation of clinically applied treatment beams with respect to bunker shielding parameters for a Cyberknife M6.

Science.gov (United States)

Henzen, Dominik; Schmidhalter, Daniel; Zanella, Claudia Christina; Volken, Werner; Mackeprang, Paul-Henry; Malthaner, Marco; Fix, Michael Karl; Manser, Peter

2018-01-01

Compared to a conventional linear accelerator, the Cyberknife (CK) is a unique system with respect to radiation protection shielding and the variety and number of non-coplanar beams are two key components regarding this aspect. In this work, a framework to assess the direction distribution and modulation factor (MF) of clinically applied treatment beams of a CyberKnife M6 is developed. Database filtering options allow studying the influence of different parameters such as collimator types, treatment sites or different bunker sizes. A distribution of monitor units (MU) is generated by projecting treatment beams onto the walls, floor and ceiling of the CyberKnife bunker. This distribution is found to be highly heterogeneous and depending, among other parameters, on the bunker size. For our bunker design, 10%-13% of the MUs are delivered to the right and left wall, each. The floor receives more than 64% of the applied MUs, while the wall behind the patient's head is not hit by primary treatment beams. Between 0% and 5% of the total MUs are delivered to the wall at the patient's feet. This number highly depends on the treatment site, e.g., for extracranial patients no beams hit that wall. Collimator choice was found to have minor influence on the distribution of MUs. On the other hand, the MF depends on the collimator type as well as on the treatment site. The MFs (delivered MU/prescribed dose) for all treatments, all MLC treatments, cranial and extracranial treatments are 8.3, 6.4, 7.7, and 9.9 MU/cGy, respectively. The developed framework allows assessing and monitoring important parameters regarding radiation protection of a CK-M6 using the actually applied treatment beams. Furthermore, it enables evaluating different clinical and constructional situations using the filtering options. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Power generation mixes evaluation applying the mean-variance theory. Analysis of the choices for Japanese energy policy

International Nuclear Information System (INIS)

Tabaru, Yasuhiko; Nonaka, Yuzuru; Nonaka, Shunsuke; Endou, Misao

2013-01-01

Optimal Japanese power generation mixes in 2030, for both economic efficiency and energy security (less cost variance risk), are evaluated by applying the mean-variance portfolio theory. Technical assumptions, including remaining generation capacity out of the present generation mix, future load duration curve, and Research and Development risks for some renewable energy technologies in 2030, are taken into consideration as either the constraints or parameters for the evaluation. Efficiency frontiers, which consist of the optimal generation mixes for several future scenarios, are identified, taking not only power balance but also capacity balance into account, and are compared with three power generation mixes submitted by the Japanese government as 'the choices for energy and environment'. (author)

Does the Rayleigh equation apply to evaluate field isotope data in contaminant hydrogeology?

Science.gov (United States)

Abe, Yumiko; Hunkeler, Daniel

2006-03-01

Stable isotope data have been increasingly used to assess in situ biodegradation of organic contaminants in groundwater. The data are usually evaluated using the Rayleigh equation to evaluate whether isotope data follow a Rayleigh trend, to calculate the extent of contaminant biodegradation, or to estimate first-order rate constants. However, the Rayleigh equation was developed for homogeneous systems while in the subsurface, contaminants can migrate at different velocities due to physical heterogeneity. This paper presents a method to quantify the systematic effect that is introduced by applying the Rayleigh equation to field isotope data. For this purpose, the travel time distribution between source and sampling point is characterized by an analytical solution to the advection-dispersion equation. The systematic effect was evaluated as a function of the magnitude of physical heterogeneity, geometry of the contaminant plume, and degree of biodegradation. Results revealed that the systematic effect always leads to an underestimation of the actual values of isotope enrichment factors, the extent of biodegradation, or first-order rate constants, especially in the dispersion-dominant region representing a higher degree of physical heterogeneity. A substantial systematic effect occurs especially for the quantification of first-order rate constants (up to 50% underestimation of actual rate) while it is relatively small for quantification of the extent of biodegradation (< 5% underestimation of actual degree of biodegradation). The magnitude of the systematic effect is in the same range as the uncertainty due to uncertainty of the analytical data, of the isotope enrichment factor, and the average travel time.

Value of Information Analysis Applied to the Economic Evaluation of Interventions Aimed at Reducing Juvenile Delinquency: An Illustration.

Directory of Open Access Journals (Sweden)

Hester V Eeren

Full Text Available To investigate whether a value of information analysis, commonly applied in health care evaluations, is feasible and meaningful in the field of crime prevention.Interventions aimed at reducing juvenile delinquency are increasingly being evaluated according to their cost-effectiveness. Results of cost-effectiveness models are subject to uncertainty in their cost and effect estimates. Further research can reduce that parameter uncertainty. The value of such further research can be estimated using a value of information analysis, as illustrated in the current study. We built upon an earlier published cost-effectiveness model that demonstrated the comparison of two interventions aimed at reducing juvenile delinquency. Outcomes were presented as costs per criminal activity free year.At a societal willingness-to-pay of €71,700 per criminal activity free year, further research to eliminate parameter uncertainty was valued at €176 million. Therefore, in this illustrative analysis, the value of information analysis determined that society should be willing to spend a maximum of €176 million in reducing decision uncertainty in the cost-effectiveness of the two interventions. Moreover, the results suggest that reducing uncertainty in some specific model parameters might be more valuable than in others.Using a value of information framework to assess the value of conducting further research in the field of crime prevention proved to be feasible. The results were meaningful and can be interpreted according to health care evaluation studies. This analysis can be helpful in justifying additional research funds to further inform the reimbursement decision in regard to interventions for juvenile delinquents.

Study on dilatation of multi-criteria evaluation method (II)

International Nuclear Information System (INIS)

Tabaru, Yasuhiko; Tomizawa, Masao; Sasaki, Shigeo

2003-01-01

In the study on FBR-cycle practical application strategy conducted by JNC, as part of development of evaluation system aiming at comparative evaluation of promising concept for FBR-cycle system, they grade the value of the concepts under the criteria evaluation such as economical efficiency and environmental load. In order that this system functions effectively in selecting promising concepts, we believe that it is important to extend the range of criteria evaluation and improve objectivity and persuasiveness of it. This is why since the last fiscal year we have been studying on evaluation methodology of and investigation examples on external economical efficiency (effects on the environment and human health, safety, energy security, nuclear non-proliferation, etc.) relevant to introduction of FBR, which had not been included in the conventional evaluation of economical efficiency. In this work, we have especially focused on the external economical efficiency relevant to energy security which is peculiar to FBR-cycle and studied on its evaluation methodology and investigation examples. Firstly, we summarized up on the concept and current situation of energy security and the position of nuclear energy in energy security. Then we identified the necessity of clarifying the importance of energy security with the middle-term point of view allowing for deficiency of fossil or uranium resources, and also the importance of the role of FBR as an improvement action for it. Secondly, we studied on the current energy economic model and examined the possibility of applying energy security for quantitative evaluation. As a result, we have concluded that the general equilibrium GTAP (Global Trade Analysis Project) in which fossil resource market around the world is modeled should be effective for quantitative evaluation of long term energy security. Finally, assuming that we will conduct the quantitative evaluation of long term energy security using GTAP model in the future, we

Clinical Evaluation of applying a hydrophobic and a hydrophilic bonding agent on the retention and durability of fissure sealant therapy

Directory of Open Access Journals (Sweden)

Mostafa GHandi

2016-03-01

Full Text Available Background and Aims: As in fissure sealant therapy the tooth surface is mostly enamel, the use of an enamel bonding agent (hydrophobic bonding agent may be more cost effective than that of newer generations of bonding (hydrophilic bonding agents. The aim of this study was to compare the retention and durability of fissure sealant therapy when applying an enamel bonding agent, a dentin bonding agent and no bonding agent during 4 years. Materials and Methods: This study was done on the first permanent molars of the upper and lower jaws of 24 students of the first grade of a primary school (6-7 years old. On 36 teeth, a dentin bonding agent (Excite was applied under the fissure sealant and on 36 teeth an enamel bonding agent (Margin bond was applied under the fissure sealant. Then, 24 teeth were selected from these two groups and were compared with a group (including 24 teeth with no bonding agent under the fissure sealant (as control group. All the fissures of the teeth were evaluated annually for 4 years to find out the presence or absence of fissure sealant substance. Data were analyzed using Wilcoxon test. Results: From the statistical analysis, there was no significant difference in retention and durability of the fissure sealant substance comparing the group with dentin bonding agent (Excite and the group with enamel bonding agent (Margin bond. Also, using a bonding agent made no significant difference (P>0.05. Conclusion: According to the results of this study, using a bonding agent made no improvement in the retention and durability of fissure sealant substance.

Summarizing history of the Nevada Applied Ecology Groups' environmental studies of transuranics and other radionuclides

International Nuclear Information System (INIS)

Howard, W.

1984-02-01

This report presents historical summaries of the research programs at the Nevada Applied Ecology Group (NAEG). NAEG was formed in 1970 as an outgrowth of the formation of the Office of Effects Evaluation and an anticipation by NV management of what was to become the National Environmental Policy Act. The objectives of the NAEG programs were: (1) delineate locations of contamination; (2) determine concentrations in ecosystem components; (3) quantify rates of movement among ecosystem components; and (4) evaluate potential dose from plutonium and other radionuclides

PERFORMANCE EVALUATION OF AN INNOVATIVE FIBER REINFORCED GEOPOLYMER SPRAY-APPLIED MORTAR FOR LARGE DIAMETER WASTEWATER MAIN REHABILITATION IN HOUSTON, TX

Science.gov (United States)

This report describes the performance evaluation of a fiber reinforced geopolymer spray-applied mortar, which has potential as a structural alternative to traditional open cut techniques used in large-diameter sewer pipes. Geopolymer is a sustainable green material that incorpor...

Evaluating health inequity interventions: applying a contextual (external) validity framework to programs funded by the Canadian Health Services Research Foundation.

Science.gov (United States)

Phillips, Kaye; Müller-Clemm, Werner; Ysselstein, Margaretha; Sachs, Jonathan

2013-02-01

Including context in the measurement and evaluation of health in equity interventions is critical to understanding how events that occur in an intervention's environment might contribute to or impede its success. This study adapted and piloted a contextual validity assessment framework on a selection of health inequity-related programs funded by the Canadian Health Services Research Foundation (CHSRF) between 1998 and 2006. The two overarching objectives of this study were (1) to determine the relative amount and quality of attention given to conceptualizing, measuring and validating context within CHSRF funded research final reports related to health-inequity; and (2) to contribute evaluative evidence towards the incorporation of context into the assessment and measurement of health inequity interventions. The study found that of the 42/146 CHSRF programs and projects, judged to be related to health inequity 20 adequately reported on the conceptualization, measurement and validation of context. Amongst these health-inequity related project reports, greatest emphasis was placed on describing the socio-political and economical context over actually measuring and validating contextual evidence. Applying a contextual validity assessment framework was useful for distinguishing between the descriptive (conceptual) versus empirical (measurement and validation) inclusion of documented contextual evidence. Although contextual validity measurement frameworks needs further development, this study contributes insight into identifying funded research related to health inequities and preliminary criteria for assessing interventions targeted at specific populations and jurisdictions. This study also feeds a larger critical dialogue (albeit beyond the scope of this study) regarding the relevance and utility of using evaluative techniques for understanding how specific external conditions support or impede the successful implementation of health inequity interventions. Copyright �

A Study of Applying Digital Mobile Museum Guide

Directory of Open Access Journals (Sweden)

Chao-yun Chaucer Liang

2003-09-01

Full Text Available With the prosperous development of information technology, museums begin to apply new technology to enhance operation and communication efficiency. One of the information technology. Personal Digital Mobile, featuring light weight and mobility, can help museum to set up an interactive navigation system, which offering capability of user-controlled guidance and both broad and depth information. In this study, literature related to museum tour guide, digital mobile navigation, and multimedia interaction design were reviewed, and two examples were offered for reference. The first one example is Exploratorium in American, which is cooperated with HP labs to integrate wireless networking and PDA devices. The domestic example is the design project of the Personal Digital Mobile Guide for the Emperor Ch’ien-lung’s Grand Cultural Enterprise Exhibition in National Palace Museum, 2002. This paper introduces the techniques involved, interactive storyboard, interface design, color planning, electronic element planning, etc. The process of applying theory into creative project may help future researches in the related areas.[Article content in Chinese

Evaluation of the analytic performance of laboratories: inter-laboratorial study of the spectroscopy of atomic absorption

International Nuclear Information System (INIS)

Wong Wong, S. M.

1996-01-01

The author made an inter-laboratorial study, with the participation of 18 national laboratories, that have spectrophotometer of atomic absorption. To evaluate the methods of analysis of lead, sodium, potasium, calcium, magnesium, zinc, copper, manganese, and iron, in the ambit of mg/l. The samples, distributed in four rounds to the laboratories, were prepared from primary patterns, deionized and distilled water. The study evaluated the homogeneity and stability, and verified its concentration, using as a reference method, the spectrometry method of Inductively Coupled Plasma emission (1CP). To obtain the characteristics of analytic performance, it applied the norm ASTM E 691. To evaluated the analytic performance, it used harmonized protocol of the International Union of Pure and applied chemistry (IUPAC). The study obtained the 29% of the laboratories had a satisfactory analytic performance, 9% had a questionable performance and 62% made an unsatisfactory analytic performance, according to the IUPAC norm. The results of the values of the characteristic performance method, show that there is no intercomparability between the laboratories, which is attributed to the different methodologies of analysis. (S. Grainger)

Case Study to Apply Work Difficulty Factors to Decommissioning Cost Estimates

Energy Technology Data Exchange (ETDEWEB)

Yun, Taesik; Jung, Hyejin; Oh, Jaeyoung; Kim, Younggook [KHNP CRI, Daejeon (Korea, Republic of)

2016-10-15

This article is prepared as a guideline regarding how to apply the work difficult factor (WDF) when it comes to the estimates of the decommissioning costs. Although several cases of the decommissioning cost estimates have been made for a few commercial nuclear power plants, the different technical, site-specific economic assumptions used make it difficult to interpret those cost estimates and compare them with that of Kori-1. In addition, it is clear that we are supposed to experience difficulties being created in the process of the Kori-1 and the virtual inaccessibility to the limited areas at the pre-decommissioning stage. Estimating decommissioning costs is one of the most crucial processes since it encompasses all the spectrum of decommissioning activities from the planning to the last evaluation on whether the decommissioning has successfully been proceeded from the safety and economic perspectives. Here I suggested the activity dependent costs is only related to WDFs of the incumbent plant planning or undergone to be decommissioned since as a matter of fact, estimating WDFs is the core process to articulately scrutinize the practical costs to apply to Kori-1 project.

Suburban landscape assessment applied to urban planning. Case study in Barcelona Metropolitan Region

Directory of Open Access Journals (Sweden)

David Serrano Giné

2015-12-01

Full Text Available Urban fringes set complex landscapes, in transition from rural to natural and urban, with fuzzy boundaries in mutual interdependence. The European Landscape Convention gives notorious importance to everyday landscapes, including those of suburban character. Few landscape evaluation researches are done in suburban areas, which is surprising considering its importance and abundance. This paper shows a methodology, yield on geographical information systems (GIS, for landscape assessment of suburban areas, useful in urban planning. Its main interest lies in a double assessment, which considers both landscape quality and landscape fragility, applied systematically. The procedure is applied in Muntanyes d’Ordal in the metropolitan area of Barcelona (Spain, an area with pronounced regional strengths and contrasted landscape values. Results are of important applicability and indicate a predominance of mean values, both for landscape quality and landscape fragility.

Study on tube rupture strength evaluation method for rapid overheating

International Nuclear Information System (INIS)

Komine, Ryuji; Wada, Yusaku

1998-08-01

A sodium-water reaction derived from the single tube break in steam generator might overheat neighbor tubes rapidly under internal pressure loadings. If the temperature of tube wall becomes too high, it has to be evaluated that the stress of tube does not exceed the material strength limit to prevent the propagation of tube rupture. In the present study this phenomenon was recognized as the fracture of cylindrical tube with the large deformation due to overheating, and the evaluation method was investigated based on both of experimental and analytical approaches. The results obtained are as follows. (1) As for the nominal stress estimation, it was clarified through the experimental data and the detailed FEM elasto-plastic large deformation analysis that the formula used in conventional designs can be applied. (2) Within the overheating temperature limits of tubes, the creep effect is dominant, even if the loading time is too short. So the strain rate on the basis of JIS elevated temperature tensile test method for steels and heat-resisting alloys is too late and almost of total strain is composed by creep one. As a result the time dependent effect cannot be evaluated under JIS strain rate condition. (3) Creep tests in shorter time condition than a few minutes and tensile tests in higher strain rate condition than 10%/min of JIS are carried out for 2 1/4Cr-1Mo(NT) steel, and the standard values for tube rupture strength evaluation are formulated. (4) The above evaluation method based on both of the stress estimation and the strength standard values application is justified by using the tube burst test data under internal pressure. (5) The strength standard values on Type 321 ss is formulated in accordance with the procedure applied for 2 1/4Cr-1Mo(NT) steel. (author)

Feasibility of Applied Gaming During Interdisciplinary Rehabilitation for Patients With Complex Chronic Pain and Fatigue Complaints: A Mixed-Methods Study.

Science.gov (United States)

Vugts, Miel A P; Joosen, Margot C W; van Bergen, Alfonsus H M M; Vrijhoef, Hubertus J M

2016-04-01

Applied gaming holds potential as a convenient and engaging means for the delivery of behavioral interventions. For developing and evaluating feasible computer-based interventions, policy makers and designers rely on limited knowledge about what causes variation in usage. In this study, we looked closely at why and by whom an applied game (LAKA) is demanded and whether it is feasible (with respect to acceptability, demand, practicality, implementation, and efficacy) and devised a complementary intervention during an interdisciplinary rehabilitation program (IRP) for patients with complex chronic pain and fatigue complaints. A mixed-methods design was used. Quantitative process analyses and assessments of feasibility were carried out with patients of a Dutch rehabilitation center who received access to LAKA without professional support during a 16-week interdisciplinary outpatient program. The quantitative data included records of routinely collected baseline variables (t0), additional surveys to measure technology acceptance before (t1) and after 8 weeks of access to LAKA (t2), and automatic log files of usage behavior (frequency, length, and progress). Subsequently, semistructured interviews were held with purposively selected patients. Interview codes triangulated and illustrated explanations of usage and supplemented quantitative findings on other feasibility domains. Of the 410 eligible patients who started an IRP during the study period, 116 patients participated in additional data collections (108 with problematic fatigue and 47 with moderate or severe pain). Qualitative data verified that hedonic motivation was the most important factor for behavioral intentions to use LAKA (Pgame (P=.034). The median behavioral intention to use LAKA was moderately positive and declined over time. Twenty patients played the game from start to finish. Behavioral change content was recognized and seen as potentially helpful by interview respondents who exposed themselves to

Evaluation of diamide insecticides co-applied with other agrochemicals at various times to manage Ostrinia nubilalis in processing snap bean.

Science.gov (United States)

Huseth, Anders S; Groves, Russell L; Chapman, Scott A; Nault, Brian A

2015-12-01

Multiple applications of pyrethroid insecticides are used to manage European corn borer, Ostrinia nubilalis Hübner, in snap bean, but new diamide insecticides may reduce application frequency. In a 2 year small-plot study, O. nubilalis control was evaluated by applying cyantraniliprole (diamide) and bifenthrin (pyrethroid) insecticides at one of three phenological stages (bud, bloom and pod formation) of snap bean development. Co-application of these insecticides with either herbicides or fungicides was also examined as a way to reduce the total number of sprays during a season. Cyantraniliprole applications timed either during bloom or during pod formation controlled O. nubilalis better than similar timings of bifenthrin. Co-applications of insecticides with fungicides controlled O. nubilalis as well as insecticide applications alone. Insecticides applied either alone or with herbicides during bud stage did not control this pest. Diamides are an alternative to pyrethroids for the management of O. nubilalis in snap bean. Adoption of diamides by snap bean growers could improve the efficiency of production by reducing the number of sprays required each season. © 2015 Society of Chemical Industry.

Noise resistance applied to the study paints

International Nuclear Information System (INIS)

Lanchas Garcia-Zarco, S.; Alfosin Perez, V.; Suarez Garcia, A.; Urrejola Madrinan, S.; Sanchez Bermudez, A.

2015-01-01

Electrochemical noise is one of the methods of analysis used to interpret the phenomenon of corrosion. It has a number of advantages over other methodology types including its simplicity, its low cost and the fact that it does not disturb the system. This methodology appears to be effective together with other techniques in metal-electrolyte systems. In this case the technique is applied on its own on commercial anti-corrosion paints for which no information is available from other techniques. The main result of this study reveals the effectiveness of the noise resistance parameter, which had already been tested in the lab, when it is used to explain how the paint system behaves in industry. (Author)

Applying lessons in evaluation | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

2011-02-01

Feb 1, 2011 ... Hosted by the World Bank's Operations Evaluation Department and Carleton University's Faculty of Public Affairs and Management, IPDET ... and 2003 believed that the program helped develop knowledge and skills that they ...

Applied Linguistics in Its Disciplinary Context

Science.gov (United States)

Liddicoat, Anthony J.

2010-01-01

Australia's current attempt to develop a process to evaluate the quality of research (Excellence in Research for Australia--ERA) places a central emphasis on the disciplinary organisation of academic work. This disciplinary focus poses particular problems for Applied Linguistics in Australia. This paper will examine Applied Linguistics in relation…

Applying decision trial and evaluation laboratory as a decision tool for effective safety management system in aviation transport

Directory of Open Access Journals (Sweden)

Ifeanyichukwu Ebubechukwu Onyegiri

2016-10-01

Full Text Available In recent years, in the aviation industry, the weak engineering controls and lapses associated with safety management systems (SMSs are responsible for the seemingly unprecedented disasters. A previous study has confirmed the difficulties experienced by safety managers with SMSs and the need to direct research to this area of investigation for more insights and progress in the evaluation and maintenance of SMSs in the aviation industry. The purpose of this work is to examine the application of Decision Trial and Evaluation Laboratory (DEMATEL to the aviation industry in developing countries with illustration using the Nigerian aviation survey data for the validation of the method. The advantage of the procedure over other decision making methods is in its ability to apply feedback in its decision making. It also affords us the opportunity of breaking down the complex aviation SMS components and elements which are multi-variate in nature through the analysis of the contributions of the diverse system criteria from the perspective of cause and effects, which in turn yields easier and yet more effective aviation transportation accident pre-corrective actions. In this work, six revised components of an SMS were identified and DEMATEL was applied to obtain their direct and indirect impacts and influences on the overall SMS performance. Data collection was by the survey questionnaire, which served as the initial direct-relation matrix, coded in Matlab software for establishing the impact relation map (IRM. The IRM was then plotted in MS Excel spread-sheet software. From our results, safety structure and regulation has the highest impact level on an SMS with a corresponding positive relation level value. In conclusion, the results agree with those of previous researchers that used grey relational analysis. Thus, DEMATEL serves as a great tool and resource for the safety manager.

Mobile Applications for Patient-centered Care Coordination: A Review of Human Factors Methods Applied to their Design, Development, and Evaluation.

Science.gov (United States)

Baysari, M T; Westbrook, J I

2015-08-13

To examine if human factors methods were applied in the design, development, and evaluation of mobile applications developed to facilitate aspects of patient-centered care coordination. We searched MEDLINE and EMBASE (2013-2014) for studies describing the design or the evaluation of a mobile health application that aimed to support patients' active involvement in the coordination of their care. 34 papers met the inclusion criteria. Applications ranged from tools that supported self-management of specific conditions (e.g. asthma) to tools that provided coaching or education. Twelve of the 15 papers describing the design or development of an app reported the use of a human factors approach. The most frequently used methods were interviews and surveys, which often included an exploration of participants' current use of information technology. Sixteen papers described the evaluation of a patient application in practice. All of them adopted a human factors approach, typically an examination of the use of app features and/or surveys or interviews which enquired about patients' views of the effects of using the app on their behaviors (e.g. medication adherence), knowledge, and relationships with healthcare providers. No study in our review assessed the impact of mobile applications on health outcomes. The potential of mobile health applications to assist patients to more actively engage in the management of their care has resulted in a large number of applications being developed. Our review showed that human factors approaches are nearly always adopted to some extent in the design, development, and evaluation of mobile applications.

Study of system safety evaluation on LTO of national project. Thermal fatigue evaluation of piping systems

International Nuclear Information System (INIS)

Kasahara, Naoto; Itoh, Takamoto; Okazaki, Masakazu; Okuda, Yukihiko; Kamaya, Masayuki; Nakamura, Akira; Nakamura, Hitoshi; Machida, Hideo

2012-01-01

Nuclear piping has various kinds of thermal fatigue failure modes. Main causes of thermal loads are structural responses to fluid temperature changes during plant operation. These phenomena have complex mechanisms and so many patterns, that their problems still occur even though well-known issues. To prevent thermal fatigue due to above thermal loads, the JSME guideline is adopted. Both thermal load and fatigue failure mechanism have been investigated and summarized into the knowledgebase. Numerical simulation methods for thermal fatigue evaluation were studied to replace structural tests. Theses knowledge was utilized to validate and justify the JSME guideline. Furthermore, new studies have been launched to apply above knowledge to enhance plant system safety. (author)

Evaluation of professional supervision in Aotearoa/New Zealand: An interprofessional study.

Science.gov (United States)

Davys, Allyson Mary; O'Connell, Michael; May, Janet; Burns, Beverley

2017-06-01

The evaluation of professional supervision has been a focus for discussion in the supervision literature over past decades. A review of the literature in this area, however, suggests that evaluation has been differently defined, variously addressed, and a range of outcomes reported. The present study reports the findings of the first stage of a three-stage study of evaluation in professional supervision in Aotearoa/New Zealand. Experienced practitioners from the four professions of counselling, mental health nursing, psychology, and social work were interviewed to explore how evaluation in professional supervision is understood and actioned in practice. Twenty four semistructured interviews were conducted with supervisees, supervisors, and managers from each of the identified professions. The findings from these interviews indicate that a majority of participants applied some form of evaluation to their supervision arrangement. These evaluations, however, did not reflect an overarching organizational or professional culture of formal evaluation, but rather, an individualized ad-hoc process initiated by one or both of the participants (supervisor and supervisee). These evaluations focussed predominantly on the process, rather than the outcomes, of supervision. While many respondents expressed interest in a formal process for evaluating supervision, a number of concerns were also raised. These concerns included a lack of evaluation skills and resource, the potential for formal evaluation to have a negative impact on the supervision relationship, the importance of maintaining the boundaries of confidentiality, and a wariness regarding the possible use of any information gathered. © 2016 Australian College of Mental Health Nurses Inc.

Evaluating Pillar Industry’s Transformation Capability: A Case Study of Two Chinese Steel-Based Cities

Science.gov (United States)

Li, Zhidong; Marinova, Dora; Guo, Xiumei; Gao, Yuan

2015-01-01

Many steel-based cities in China were established between the 1950s and 1960s. After more than half a century of development and boom, these cities are starting to decline and industrial transformation is urgently needed. This paper focuses on evaluating the transformation capability of resource-based cities building an evaluation model. Using Text Mining and the Document Explorer technique as a way of extracting text features, the 200 most frequently used words are derived from 100 publications related to steel- and other resource-based cities. The Expert Evaluation Method (EEM) and Analytic Hierarchy Process (AHP) techniques are then applied to select 53 indicators, determine their weights and establish an index system for evaluating the transformation capability of the pillar industry of China’s steel-based cities. Using real data and expert reviews, the improved Fuzzy Relation Matrix (FRM) method is applied to two case studies in China, namely Panzhihua and Daye, and the evaluation model is developed using Fuzzy Comprehensive Evaluation (FCE). The cities’ abilities to carry out industrial transformation are evaluated with concerns expressed for the case of Daye. The findings have policy implications for the potential and required industrial transformation in the two selected cities and other resource-based towns. PMID:26422266

Developing and Using a Logic Model for Evaluation and Assessment of University Student Affairs Programming: A Case Study

Science.gov (United States)

Cooper, Jeff

2009-01-01

This dissertation addresses theory and practice of evaluation and assessment in university student affairs, by applying logic modeling/program theory to a case study. I intend to add knowledge to ongoing dialogue among evaluation scholars and practitioners on student affairs program planning and improvement as integral considerations that serve…

Study of fieldbus technology applied in a sterilization plant control and safety systems

International Nuclear Information System (INIS)

Karam Junior, Dib

2000-01-01

Several sterilization processes have been used in these years for treatment of countless products. Some processes use high temperatures, thermal shocks and chemical agents. With the discovery of the ionizing radiation and its posterior technological developments turned possible application of that process, in 1960, also in the the sterilization, denominated radiation sterilization. This process became also applied in another areas of health and industrial as food conservation, gemstones enhancement and others. The radiation sterilization requests an effective control and it needs a high level of safety. The commercial use of the computers applied in industrial automation provides and the domain of new technologies in this field provides new applications then new designs now is possible. The Fieldbus technology, a new digital communication protocol, like a Local Area Network, can be an alternative in the cobalt-60 irradiation plant. The present work suggests, evaluates, qualifies and quantifies this possibility. (author)

Applied philosophy and psychotherapy: Heraclitus as case study

Directory of Open Access Journals (Sweden)

Johann Beukes

2002-10-01

Full Text Available This article investigates a recent attempt to apply philosophy within the discipline of psychotherapy and to investigate the somewhat undefined realm of philosophical counselling. After introducing the claims of this interdisciplinary exercise and after addressing the problems involved in crossing the boundaries between philosophy and psychotherapy, the article elaborates on  Alex Howard’s (2000 [Philosophy for counselling and psychotherapy: Pythagoras to post-modernism. London: Macmillan] attempt to make explicit use of philosophy in psychotherapy, using his interpretation and application of Heraclitus’ philosophy as case study.

Study of evaluation techniques of software safety and reliability in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Youn, Cheong; Baek, Y. W.; Kim, H. C.; Park, N. J.; Shin, C. Y. [Chungnam National Univ., Taejon (Korea, Republic of)

1999-04-15

Software system development process and software quality assurance activities are examined in this study. Especially software safety and reliability requirements in nuclear power plant are investigated. For this purpose methodologies and tools which can be applied to software analysis, design, implementation, testing, maintenance step are evaluated. Necessary tasks for each step are investigated. Duty, input, and detailed activity for each task are defined to establish development process of high quality software system. This means applying basic concepts of software engineering and principles of system development. This study establish a guideline that can assure software safety and reliability requirements in digitalized nuclear plant systems and can be used as a guidebook of software development process to assure software quality many software development organization.

Environmental fate of pesticides applied on coffee crops in ...

African Journals Online (AJOL)

The aim of this paper was evaluate the environmental fate of pesticides applied in coffee crops in southeast of Brazil, using the level I fugacity model. Chemical and physical characteristics of the pesticides were considered in different environmental compartments and applied fugacity equations. The preliminary evaluation ...

An Efficient Model for NPD Performance Evaluation Using DEMATEL and Fuzzy ANP—Applied to the TFT-LCD Touch Panel Industry in Taiwan

Directory of Open Access Journals (Sweden)

Wen-Chin Chen

2015-10-01

Full Text Available As the competitive market nowadays shortens the life cycle of products, new products should be designed to meet the customer’s demand under a dynamic marketing environment so as to efficiently enhance the product strength of new products with maximization of profit. Hence, the key solution for enterprises to succeed will be the precise evaluation of new product development (NPD performance, particularly for those who manage to survive in the intensely competitive market in Taiwan. This study is to identify the thin film transistor-liquid crystal display (TFT-LCD touch panel industry and then establish an integrated model of NPD performance evaluation for enterprises. Firstly, literature review and interviews with experts are conducted to select the four aspects and 15 criteria as the main factors affecting NDP performance evaluation. Secondly, Decision Making Trial and Evaluation Laboratory (DEMATEL is employed to identify the interrelationships among those factors. Finally, a Fuzzy theory is applied to resolve the linguistic hedges and an Analytic Network Process (ANP is adopted to obtain the weights of all factors. A case study is performed to validate the proposed model in a Taiwanese TFT-LCD company. It not only provides the decision maker with a guidance system but also increases the competitive advantages for the TFT-LCD industry to design new products in the future.

Evaluating priority setting success in healthcare: a pilot study

Directory of Open Access Journals (Sweden)

Upshur Ross

2010-05-01

Full Text Available Abstract Background In healthcare today, decisions are made in the face of serious resource constraints. Healthcare managers are struggling to provide high quality care, manage resources effectively, and meet changing patient needs. Healthcare managers who are constantly making difficult resource decisions desire a way to improve their priority setting processes. Despite the wealth of existing priority setting literature (for example, program budgeting and marginal analysis, accountability for reasonableness, the 'describe-evaluate-improve' strategy there are still no tools to evaluate how healthcare resources are prioritised. This paper describes the development and piloting of a process to evaluate priority setting in health institutions. The evaluation process was designed to examine the procedural and substantive dimensions of priority setting using a multi-methods approach, including a staff survey, decision-maker interviews, and document analysis. Methods The evaluation process was piloted in a mid-size community hospital in Ontario, Canada while its leaders worked through their annual budgeting process. Both qualitative and quantitative methods were used to analyze the data. Results The evaluation process was both applicable to the context and it captured the budgeting process. In general, the pilot test provided support for our evaluation process and our definition of success, (i.e., our conceptual framework. Conclusions The purpose of the evaluation process is to provide a simple, practical way for an organization to better understand what it means to achieve success in its priority setting activities and identify areas for improvement. In order for the process to be used by healthcare managers today, modification and contextualization of the process are anticipated. As the evaluation process is applied in more health care organizations or applied repeatedly in an organization, it may become more streamlined.

Rayleigh to Compton ratio scatter tomography applied to breast cancer diagnosis: A preliminary computational study

International Nuclear Information System (INIS)

Antoniassi, M.; Conceição, A.L.C.; Poletti, M.E.

2014-01-01

In the present work, a tomographic technique based on Rayleigh to Compton scattering ratio (R/C) was studied using computational simulation in order to assess its application to breast cancer diagnosis. In this preliminary study, some parameters that affect the image quality were evaluated, such as: (i) energy beam, (ii) size and glandularity of the breast, and (iii) statistical count noise. The results showed that the R/C contrast increases with increasing photon energy and decreases with increasing glandularity of the sample. The statistical noise showed to be a significant parameter, although the quality of the obtained images was acceptable for a considerable range of noise level. The preliminary results suggest that the R/C tomographic technique has a potential of being applied as a complementary tool in the breast cancer diagnostic. - Highlights: ► A tomographic technique based on Rayleigh to Compton scattering ratio is proposed in order to study breast tissues. ► The Rayleigh to Compton scattering ratio technique is compared with conventional transmission technique. ► The influence of experimental parameters (energy, sample, detection system) is studied

Comparing trainers’ reports of clicker use to the use of clickers in applied research studies: methodological differences may explain conflicting results

Directory of Open Access Journals (Sweden)

Lynna C Feng

2017-02-01

Full Text Available Clicker training refers to an animal training technique, derived from laboratory-based studies of animal learning and behaviour, in which a reward-predicting signal is delivered immediately following performance of a desired behaviour, and is subsequently followed by a reward. While clicker training is popular amongst dog training practitioners, scientific evaluation in applied settings has been largely unsuccessful in replicating the benefits of reward-predicting signals seen in laboratory animal studies. Here we present an analysis of dog trainers’ advice and perceptions, conducted to better understand clicker training as it occurs in the dog training industry. Twenty-five sources (13 interviews with dog trainers, 5 websites, and 7 books were analysed using a deductive content analysis procedure. We found that, for many sources, “clicker training” referred not only to the technique, but also to a philosophy of training that emphasises positive reinforcement and the deliberate application of Learning Theory principles. Many sources reported that clicker training was fun, for both dog and handler, but that it could be frustrating for handlers to learn and sometimes cumbersome to juggle the extra equipment. In addition, while most sources recommended clicker training particularly when training new behaviours, many stated that it was no longer needed once the dog had learned the desired behaviour. When comparing industry recommendations to methods used in applied studies, different criteria were used for predictor signal conditioning. Inadequate conditioning of the predictor signal in empirical evaluations could partly explain the lack of learning benefits in applied studies. While future research is needed to verify the practitioner beliefs in a wider population, these results provide an in-depth description of what clicker training is, at least for the sources analysed, and a potential starting point for understanding methodological

Methodology for Applying Cyber Security Risk Evaluation from BN Model to PSA Model

Energy Technology Data Exchange (ETDEWEB)

Shin, Jin Soo; Heo, Gyun Young [Kyung Hee University, Youngin (Korea, Republic of); Kang, Hyun Gook [KAIST, Dajeon (Korea, Republic of); Son, Han Seong [Joongbu University, Chubu (Korea, Republic of)

2014-08-15

There are several advantages to use digital equipment such as cost, convenience, and availability. It is inevitable to use the digital I and C equipment replaced analog. Nuclear facilities have already started applying the digital system to I and C system. However, the nuclear facilities also have to change I and C system even though it is difficult to use digital equipment due to high level of safety, irradiation embrittlement, and cyber security. A cyber security which is one of important concerns to use digital equipment can affect the whole integrity of nuclear facilities. For instance, cyber-attack occurred to nuclear facilities such as the SQL slammer worm, stuxnet, DUQU, and flame. The regulatory authorities have published many regulatory requirement documents such as U.S. NRC Regulatory Guide 5.71, 1.152, IAEA guide NSS-17, IEEE Standard, and KINS Regulatory Guide. One of the important problem of cyber security research for nuclear facilities is difficulty to obtain the data through the penetration experiments. Therefore, we make cyber security risk evaluation model with Bayesian network (BN) for nuclear reactor protection system (RPS), which is one of the safety-critical systems to trip the reactor when the accident is happened to the facilities. BN can be used for overcoming these problems. We propose a method to apply BN cyber security model to probabilistic safety assessment (PSA) model, which had been used for safety assessment of system, structure and components of facility. The proposed method will be able to provide the insight of safety as well as cyber risk to the facility.

Methodology for Applying Cyber Security Risk Evaluation from BN Model to PSA Model

International Nuclear Information System (INIS)

Shin, Jin Soo; Heo, Gyun Young; Kang, Hyun Gook; Son, Han Seong

2014-01-01

There are several advantages to use digital equipment such as cost, convenience, and availability. It is inevitable to use the digital I and C equipment replaced analog. Nuclear facilities have already started applying the digital system to I and C system. However, the nuclear facilities also have to change I and C system even though it is difficult to use digital equipment due to high level of safety, irradiation embrittlement, and cyber security. A cyber security which is one of important concerns to use digital equipment can affect the whole integrity of nuclear facilities. For instance, cyber-attack occurred to nuclear facilities such as the SQL slammer worm, stuxnet, DUQU, and flame. The regulatory authorities have published many regulatory requirement documents such as U.S. NRC Regulatory Guide 5.71, 1.152, IAEA guide NSS-17, IEEE Standard, and KINS Regulatory Guide. One of the important problem of cyber security research for nuclear facilities is difficulty to obtain the data through the penetration experiments. Therefore, we make cyber security risk evaluation model with Bayesian network (BN) for nuclear reactor protection system (RPS), which is one of the safety-critical systems to trip the reactor when the accident is happened to the facilities. BN can be used for overcoming these problems. We propose a method to apply BN cyber security model to probabilistic safety assessment (PSA) model, which had been used for safety assessment of system, structure and components of facility. The proposed method will be able to provide the insight of safety as well as cyber risk to the facility

Using an electrohydraulic ankle foot orthosis to study modifications in feedforward control during locomotor adaptation to force fields applied in stance.

Science.gov (United States)

Noel, Martin; Fortin, Karine; Bouyer, Laurent J

2009-06-03

Adapting to external forces during walking has been proposed as a tool to improve locomotion after central nervous system injury. However, sensorimotor integration during walking varies according to the timing in the gait cycle, suggesting that adaptation may also depend on gait phases. In this study, an ElectroHydraulic AFO (EHO) was used to apply forces specifically during mid-stance and push-off to evaluate if feedforward movement control can be adapted in these 2 gait phases. Eleven healthy subjects walked on a treadmill before (3 min), during (5 min) and after (5 min) exposure to 2 force fields applied by the EHO (mid-stance/push-off; approximately 10 Nm, towards dorsiflexion). To evaluate modifications in feedforward control, strides with no force field ('catch strides') were unexpectedly inserted during the force field walking period. When initially exposed to a mid-stance force field (FF 20%), subjects showed a significant increase in ankle dorsiflexion velocity. Catches applied early into the FF 20% were similar to baseline (P > 0.99). Subjects gradually adapted by returning ankle velocity to baseline over approximately 50 strides. Catches applied thereafter showed decreased ankle velocity where the force field was normally applied, indicating the presence of feedforward adaptation. When initially exposed to a push-off force field (FF 50%), plantarflexion velocity was reduced in the zone of force field application. No adaptation occurred over the 5 min exposure. Catch strides kinematics remained similar to control at all times, suggesting no feedforward adaptation. As a control, force fields assisting plantarflexion (-3.5 to -9.5 Nm) were applied and increased ankle plantarflexion during push-off, confirming that the lack of kinematic changes during FF 50% catch strides were not simply due to a large ankle impedance. Together these results show that ankle exoskeletons such as the EHO can be used to study phase-specific adaptive control of the ankle during

Using an electrohydraulic ankle foot orthosis to study modifications in feedforward control during locomotor adaptation to force fields applied in stance

Directory of Open Access Journals (Sweden)

Bouyer Laurent J

2009-06-01

Full Text Available Abstract Background Adapting to external forces during walking has been proposed as a tool to improve locomotion after central nervous system injury. However, sensorimotor integration during walking varies according to the timing in the gait cycle, suggesting that adaptation may also depend on gait phases. In this study, an ElectroHydraulic AFO (EHO was used to apply forces specifically during mid-stance and push-off to evaluate if feedforward movement control can be adapted in these 2 gait phases. Methods Eleven healthy subjects walked on a treadmill before (3 min, during (5 min and after (5 min exposure to 2 force fields applied by the EHO (mid-stance/push-off; ~10 Nm, towards dorsiflexion. To evaluate modifications in feedforward control, strides with no force field ('catch strides' were unexpectedly inserted during the force field walking period. Results When initially exposed to a mid-stance force field (FF20%, subjects showed a significant increase in ankle dorsiflexion velocity. Catches applied early into the FF20% were similar to baseline (P > 0.99. Subjects gradually adapted by returning ankle velocity to baseline over ~50 strides. Catches applied thereafter showed decreased ankle velocity where the force field was normally applied, indicating the presence of feedforward adaptation. When initially exposed to a push-off force field (FF50%, plantarflexion velocity was reduced in the zone of force field application. No adaptation occurred over the 5 min exposure. Catch strides kinematics remained similar to control at all times, suggesting no feedforward adaptation. As a control, force fields assisting plantarflexion (-3.5 to -9.5 Nm were applied and increased ankle plantarflexion during push-off, confirming that the lack of kinematic changes during FF50% catch strides were not simply due to a large ankle impedance. Conclusion Together these results show that ankle exoskeletons such as the EHO can be used to study phase-specific adaptive

Using an electrohydraulic ankle foot orthosis to study modifications in feedforward control during locomotor adaptation to force fields applied in stance

Science.gov (United States)

Noel, Martin; Fortin, Karine; Bouyer, Laurent J

2009-01-01

Background Adapting to external forces during walking has been proposed as a tool to improve locomotion after central nervous system injury. However, sensorimotor integration during walking varies according to the timing in the gait cycle, suggesting that adaptation may also depend on gait phases. In this study, an ElectroHydraulic AFO (EHO) was used to apply forces specifically during mid-stance and push-off to evaluate if feedforward movement control can be adapted in these 2 gait phases. Methods Eleven healthy subjects walked on a treadmill before (3 min), during (5 min) and after (5 min) exposure to 2 force fields applied by the EHO (mid-stance/push-off; ~10 Nm, towards dorsiflexion). To evaluate modifications in feedforward control, strides with no force field ('catch strides') were unexpectedly inserted during the force field walking period. Results When initially exposed to a mid-stance force field (FF20%), subjects showed a significant increase in ankle dorsiflexion velocity. Catches applied early into the FF20% were similar to baseline (P > 0.99). Subjects gradually adapted by returning ankle velocity to baseline over ~50 strides. Catches applied thereafter showed decreased ankle velocity where the force field was normally applied, indicating the presence of feedforward adaptation. When initially exposed to a push-off force field (FF50%), plantarflexion velocity was reduced in the zone of force field application. No adaptation occurred over the 5 min exposure. Catch strides kinematics remained similar to control at all times, suggesting no feedforward adaptation. As a control, force fields assisting plantarflexion (-3.5 to -9.5 Nm) were applied and increased ankle plantarflexion during push-off, confirming that the lack of kinematic changes during FF50% catch strides were not simply due to a large ankle impedance. Conclusion Together these results show that ankle exoskeletons such as the EHO can be used to study phase-specific adaptive control of the ankle

Isotope technology as applied to studies of soil fertility, nutrient availability and fertilizer use on flooded rice soils

International Nuclear Information System (INIS)

Patnaik, S.; Mohanty, S.K.; Dash, R.N.

1979-01-01

Research is reviewed on soil fertility and nutrient availability in relation to fertilizer efficiency, especially o stimulated the mineralization of soil N. Losses of added N from oxidation, leaching, denitrification and volatilization could be minimized through placement of N fertilizer in the reduced zone or by the addition of rice straw for rapid immobilization of added N. Fe-P and, to some extent, Al-P provided P to the rice plants, particularly in P-deficient soils. Added phosphates were converted to these forms which, under waterlogged soil conditions, released more P into the soil solution through reductive solubilization of Fe-P and hydrolytic dissolution of Al-P. The rice plants generally absorbed fertilizer N during the vegetative growth period and N mineralized from soil organic matter during the reproductive growth period. 15 N studies indicated higher grain yield and utilization of applied N through fractional application of 70-80% during the vegetative growth period, and the remaining 20-30% top-dressed at the panicle initiation stage. Ammonia-containing and -forming (urea) fertilizers were superior to the nitrate form of N. In field tests, however, the crop recovery of applied N was relatively low. Phosphatic fertilizers were best applied at puddling. In general, water-soluble phosphates were superior to citrate-soluble or insoluble phosphates. The latter could be made as efficient as the water-soluble phosphate, at comparable low rates, by applying to the moist aerobic acid soil 2-3 weeks before flooding and transplanting rice. Tracer studies have been used to evaluate the nutrient-supplying capacity of the soil from the 'A' value concept. 'A' values varied with varying conditions of soil, rate, time and form of fertilizer application. Zn nutrition of the rice plant and fertilizer use with 65 Zn have been studied relatively little. Some lines of future work are suggested

Applying controlled non-uniform deformation for in vitro studies of cell mechanobiology.

Science.gov (United States)

Balestrini, Jenna L; Skorinko, Jeremy K; Hera, Adriana; Gaudette, Glenn R; Billiar, Kristen L

2010-06-01

Cells within connective tissues routinely experience a wide range of non-uniform mechanical loads that regulate many cell behaviors. In this study, we developed an experimental system to produce complex strain patterns for the study of strain magnitude, anisotropy, and gradient effects on cells in culture. A standard equibiaxial cell stretching system was modified by affixing glass coverslips (5, 10, or 15 mm diameter) to the center of 35 mm diameter flexible-bottomed culture wells. Ring inserts were utilized to limit applied strain to different levels in each individual well at a given vacuum pressure thus enabling parallel experiments at different strain levels. Deformation fields were measured using high-density mapping for up to 6% applied strain. The addition of the rigid inclusion creates strong circumferential and radial strain gradients, with a continuous range of stretch anisotropy ranging from strip biaxial to equibiaxial strain and radial strains up to 24% near the inclusion. Dermal fibroblasts seeded within our 2D system (5 mm inclusions; 2% applied strain for 2 days at 0.2 Hz) demonstrated the characteristic orientation perpendicular to the direction of principal strain. Dermal fibroblasts seeded within fibrin gels (5 mm inclusions; 6% applied strain for 8 days at 0.2 Hz) oriented themselves similarly and compacted their surrounding matrix to an increasing extent with local strain magnitude. This study verifies how inhomogeneous strain fields can be produced in a tunable and simply constructed system and demonstrates the potential utility for studying gradients with a continuous spectrum of strain magnitudes and anisotropies.

Applied physics

International Nuclear Information System (INIS)

Anon.

1980-01-01

The Physics Division research program that is dedicated primarily to applied research goals involves the interaction of energetic particles with solids. This applied research is carried out in conjunction with the basic research studies from which it evolved

Physical and Clinical Evaluation of Hip Spica Cast applied with Three-slab Technique using Fibreglass Material

Directory of Open Access Journals (Sweden)

Bitar KM

2016-11-01

Full Text Available Introduction: Hip spica casting is an important component of treatment for developmental dysplasia of the hip (DDH and popular treatment method for femur fractures in children. Breakage at the hip region is a relatively common problem of this cast. We have developed a three-slab technique of hip spica application using fibreglass as the cast material. The purpose of this review was to evaluate the physical durability of the spica cast and skin complications with its use. Methodology: A retrospective review of children with various conditions requiring hip spica immobilisation which was applied using our method. Study duration was from 1st of January 2014 until 31st December 2015. Our main outcomes were cast breakage and skin complications. For children with hip instability, the first cast would be changed after one month, and the second cast about two months later. Results: Twenty-one children were included, with an average age of 2.2 years. The most common indication for spica immobilisation was developmental dysplasia of the hip. One child had skin irritation after spica application. No spica breakage was noted. Conclusion: This study showed that the three-slab method of hip spica cast application using fibreglass material was durable and safe with low risk of skin complications.

Applying usability heuristics to radiotherapy systems

International Nuclear Information System (INIS)

Chan, Alvita J.; Islam, Mohammad K.; Rosewall, Tara; Jaffray, David A.; Easty, Anthony C.; Cafazzo, Joseph A.

2012-01-01

Background and purpose: Heuristic evaluations have been used to evaluate safety of medical devices by identifying and assessing usability issues. Since radiotherapy treatment delivery systems often consist of multiple complex user-interfaces, a heuristic evaluation was conducted to assess the potential safety issues of such a system. Material and methods: A heuristic evaluation was conducted to evaluate the treatment delivery system at Princess Margaret Hospital (Toronto, Canada). Two independent evaluators identified usability issues with the user-interfaces and rated the severity of each issue. Results: The evaluators identified 75 usability issues in total. Eighteen of them were rated as high severity, indicating the potential to have a major impact on patient safety. A majority of issues were found on the record and verify system, and many were associated with the patient setup process. While the hospital has processes in place to ensure patient safety, recommendations were developed to further mitigate the risks of potential consequences. Conclusions: Heuristic evaluation is an efficient and inexpensive method that can be successfully applied to radiotherapy delivery systems to identify usability issues and improve patient safety. Although this study was conducted only at one site, the findings may have broad implications for the design of these systems.

Study of Phase Change Materials Applied to CPV Receivers

Directory of Open Access Journals (Sweden)

Zun-Hao Shih

2015-01-01

Full Text Available There are lots of factors which can directly affect output efficiency of photovoltaic device. One of them is high temperature which would cause adverse effect to solar cell. When solar cell is operated in high temperature, the cell’s output efficiency will become low. Therefore, improving thermal spreading of solar cell is an important issue. In this study, we focused on finding new materials to enhance the thermal dispreading and keep the temperature of solar cell as low as possible. The new materials are different from conventional metal ones; they are called “phase change materials (PCMs” which are mainly applied to green buildings. We chose two kinds of PSMs to study their thermal dispreading ability and to compare them with traditional aluminum material. These two kinds of PCMs are wax and lauric acid. We made three aluminum-based cuboids as heat sinking units and two of them were designed with hollow space to fill in the PCMs. We applied electric forward bias on solar cells to simulate the heat contributed from the concentrated sunlight. Then we observed the thermal distribution of these three kinds of thermal spreading materials. Two levels of forward biases were chosen to test the samples and analyze the experiment results.

Study on safety of crystallization method applied to dissolver solution in fast breeder reactor reprocessing

International Nuclear Information System (INIS)

Okuno, Hiroshi; Fujine, Yukio; Asakura, Toshihide; Murazaki, Minoru; Koyama, Tomozo; Sakakibara, Tetsuro; Shibata, Atsuhiro

1999-03-01

The crystallization method is proposed to apply for recovery of uranium from dissolution liquid, enabling to reduce handling materials in later stages of reprocessing used fast breeder reactor (FBR) fuels. This report studies possible safety problems accompanied by the proposed method. Crystallization process was first defined in the whole reprocessing process, and the quantity and the kind of treated fuel were specified. Possible problems, such as criticality, shielding, fire/explosion, and confinement, were then investigated; and the events that might induce accidental incidents were discussed. Criticality, above all the incidents, was further studied by considering exampled criticality control of the crystallization process. For crystallization equipment, in particular, evaluation models were set up in normal and accidental operation conditions. Related data were selected out from the nuclear criticality safety handbooks. The theoretical densities of plutonium nitrates, which give basic and important information, were estimated in this report based on the crystal structure data. The criticality limit of crystallization equipment was calculated based on the above information. (author)

Searching for Methods on Evaluation Alternatives and Studying Decision Making System Regarding Enhancing Publicity of Nuclear Spent Fuel

International Nuclear Information System (INIS)

Cho, Seongkyung; Choi, Seungho; Kim, Hyerim; Song, Jiyeon; Lee, Yoonsup; Sohn, Seohyun

2013-01-01

This study was done in order to anticipate the aspect of publicity enhancement on nuclear spent fuel so that it can find the evaluation methods of alternative ways of management which could applied actually and make the decision making system of Publicity Enhancement Committee in advance. In Korea, the nuclear spent fuel is temporarily stored inside of the nuclear facility field, and it is expected that Gori nuclear facility is going to be saturated since 2016 but the solutions are still incomplete. The problem of management of nuclear spent fuel is an important issue in terms of not only the nuclear power policy but also of safe management of the already made nuclear spent fuel. This study has its meaning to draw the evaluation criteria of the management alternatives on nuclear spent fuel which can be applied in Korean case, and to find the necessity of verifying the evaluation of management alternatives through Publicity Enhancement because of different stands according to the interests. As a result, rather than technological engineering safety evaluation, qualitative analysis in terms of social costs, quantitative evaluation in terms of economic costs, this study advises the methods of public hearings and citizen juries which are effective, which makes it meaningful

Evaluation of non-point source pollution reduction by applying best management practices using a SWAT model and QuickBird high resolution satellite imagery.

Science.gov (United States)

Lee, MiSeon; Park, GeunAe; Park, MinJi; Park, JongYoon; Lee, JiWan; Kim, SeongJoon

2010-01-01

This study evaluated the reduction effect of non-point source pollution by applying best management practices (BMPs) to a 1.21 km2 small agricultural watershed using a SWAT (Soil and Water Assessment Tool) model. Two meter QuickBird land use data were prepared for the watershed. The SWAT was calibrated and validated using daily streamflow and monthly water quality (total phosphorus (TP), total nitrogen (TN), and suspended solids (SS)) records from 1999 to 2000 and from 2001 to 2002. The average Nash and Sutcliffe model efficiency was 0.63 for the streamflow and the coefficients of determination were 0.88, 0.72, and 0.68 for SS, TN, and TP, respectively. Four BMP scenarios viz. the application of vegetation filter strip and riparian buffer system, the regulation of Universal Soil Loss Equation P factor, and the fertilizing control amount for crops were applied and analyzed.

Sensitivity study on heuristic rules applied to the neutronic optimization of cells for BWR

International Nuclear Information System (INIS)

Gonzalez C, J.; Martin del Campo M, C.; Francois L, J.L.

2004-01-01

The objective of this work is to verify the validity of the heuristic rules that have been applied in the processes of radial optimization of fuel cells. It was examined the rule with respect to the accommodation of fuel in the corners of the cell and it became special attention on the influence of the position and concentration of those pellets with gadolinium in the reactivity of the cell and the safety parameters. The evaluation behaved on designed cells violating the heuristic rules. For both cases the cells were analyzed between infinite using the HELIOS code. Additionally, for the second case, it was behaved a stage more exhaustive where it was used one of the studied cells that it completed those safety parameters and of reactivity to generate the design of an assemble that was used to calculate with CM-PRESTO the behavior of the nucleus during three operation cycles. (Author)

A method for evaluation of proton plan robustness towards inter-fractional motion applied to pelvic lymph node irradiation

DEFF Research Database (Denmark)

Andersen, Andreas G; Casares-Magaz, Oscar; Muren, Ludvig P

2015-01-01

of the pelvic lymph nodes (LNs) from different beam angles. Patient- versus population-specific patterns in dose deterioration were explored. MATERIAL AND METHODS: Patient data sets consisting of a planning computed tomography (pCT) as well as multiple repeat CT (rCT) scans for three patients were used......BACKGROUND: The benefit of proton therapy may be jeopardized by dose deterioration caused by water equivalent path length (WEPL) variations. In this study we introduced a method to evaluate robustness of proton therapy with respect to inter-fractional motion and applied it to irradiation...... in deterioration patterns were found for the investigated patients, with beam angles delivering less dose to rectum, bladder and overall normal tissue identified around 40° and around 150°-160° for the left LNs, and corresponding angles for the right LNs. These angles were also associated with low values of WEPL...

Support for system connectivity –Learning from evaluating an evaluation

DEFF Research Database (Denmark)

Christensen, Jesper Lindgaard

been sparse on investigat-ing effects of these as well as on the broader criteria to evaluate the innovation networks and functioning of the system. This paper discusses what are such criteria for evaluating innovation policies that rely on enhanc-ing system connectivity and repair system failures......Innovation is said to be dependent upon collaboration and networks. The innovation system thinking empha-sizes networks but also their supporting informal institutions, learning processes, and the relations between actors in the system. Despite the importance of networks, evaluation studies have......? By way of illustration, and as a mean to be specific on these criteria, the paper discusses the possible rationale for governments to support business angel networks (BAN) and what criteria to apply when evaluating such networks. It is found that applying traditional evaluation criteria for assessing...

Evaluation on activation activity of reactor in JRR-2 applied 3 dimensional model to neutron flux calculation

International Nuclear Information System (INIS)

Kishimoto, Katsumi; Arigane, Kenji

2005-03-01

Revaluation to activation activity of reactor evaluated at the notification of dismantling submitted in 1997 was carried out in JRR-2 where decommissioning was advanced now. In the revaluation, estimation accuracy on neutron streaming at various horizontal experimental tubes was improved by applying 3 dimensional model to neutron transport calculation that had been carried out by 2 dimensional model, and calculating with TORT. As the result, excessive overestimations on horizontal experimental tubes and biological shield that had greatly contributed to total activation activity in evaluation at the notification of dismantling was revised, sum of their activation activities in the revaluation decreased to 1/18 (case after 1 year from the permanent shutdown of reactor) of evaluation at the notification of dismantling, and the structural materials that had large activation activity were changed. By the above, it was shown that introducing 3 dimensional model was effective in evaluation on activation activity of the research reactor that had a lot of various experimental tubes. Total activation activity of reactor by the revaluation depended on control rods, thermal shield plates and horizontal experimental tubes, and the value after 1 year from the permanent shutdown of reactor was 1.9x10 14 Bq. (author)

Correlation between electron-irradiation defects and applied stress in graphene: A molecular dynamics study

Energy Technology Data Exchange (ETDEWEB)

Kida, Shogo; Yamamoto, Masaya; Kawata, Hiroaki; Hirai, Yoshihiko; Yasuda, Masaaki, E-mail: yasuda@pe.osakafu-u.ac.jp [Department of Physics and Electronics, Osaka Prefecture University, Sakai, Osaka 599-8531 (Japan); Tada, Kazuhiro [Department of Electrical and Control Systems Engineering, National Institute of Technology, Toyama College, Toyama 939-8630 (Japan)

2015-09-15

Molecular dynamics (MD) simulations are performed to study the correlation between electron irradiation defects and applied stress in graphene. The electron irradiation effect is introduced by the binary collision model in the MD simulation. By applying a tensile stress to graphene, the number of adatom-vacancy (AV) and Stone–Wales (SW) defects increase under electron irradiation, while the number of single-vacancy defects is not noticeably affected by the applied stress. Both the activation and formation energies of an AV defect and the activation energy of an SW defect decrease when a tensile stress is applied to graphene. Applying tensile stress also relaxes the compression stress associated with SW defect formation. These effects induced by the applied stress cause the increase in AV and SW defect formation under electron irradiation.

Applying the WEAP Model to Water Resource

DEFF Research Database (Denmark)

Gao, Jingjing; Christensen, Per; Li, Wei

efficiency, treatment and reuse of water. The WEAP model was applied to the Ordos catchment where it was used for the first time in China. The changes in water resource utilization in Ordos basin were assessed with the model. It was found that the WEAP model is a useful tool for water resource assessment......Water resources assessment is a tool to provide decision makers with an appropriate basis to make informed judgments regarding the objectives and targets to be addressed during the Strategic Environmental Assessment (SEA) process. The study shows how water resources assessment can be applied in SEA...... in assessing the effects on water resources using a case study on a Coal Industry Development Plan in an arid region in North Western China. In the case the WEAP model (Water Evaluation And Planning System) were used to simulate various scenarios using a diversity of technological instruments like irrigation...

Leading Critically: A Grounded Theory of Applied Critical Thinking in Leadership Studies

Science.gov (United States)

Jekins, Daniel M.; Cutchens, Amanda B.

2011-01-01

This study describes the development of a grounded theory of applied critical thinking in leadership studies and examines how student-centered experiential learning in leadership education bridged critical thinking with action. Over three semester undergraduate students in an upper level leadership studies course at a large four-year public…

The study on the evaluation of the pollution control situation of the sewage systems in the counties and cities of Taiwan by applying the VIKOR method.

Science.gov (United States)

Kuo, Jun-Yuan

2017-12-01

Currently, the pollution control situation of the sewage systems across Taiwan can be divided into the two major sewage systems, namely, industrial area sewage and public community sewage. When the counties and cities of Taiwan cannot effectively control the sewage pollution situation, ecological pollution of the environment and personal health damage would result. Therefore, evaluating the pollution control situation of the sewage systems can help the environmental protection authorities developing strategies for the pollution control of the sewage systems in the future. In this study, the Vise Kriterijumska Optimizacija I Kompromisno Resenje (VIKOR) method was applied to evaluate the pollution control situation of the sewage systems. The water sample test qualification rate, the emission permit issuance rate, and the staff setting rate of the dedicated wastewater treatment company were used as the pollution control evaluation indexes. According to the results, the use of the VIKOR method to evaluate the pollution control situation of the sewage systems is effective. In cities and counties in Taiwan, public community sewage systems, dedicated to pollution control case, the public community should be actively coached in emission control technology to upgrade sewage capacity, the issuance of discharge permits, and the staff setting rate of the dedicated wastewater treatment, to improve public community sewage pollution control system capabilities. In Taiwan, the industrial area sewage systems, dedicated to pollution control situations, must pay attention to business units in raw materials, spare part inventory, and machine supplier of choice, and we must choose to meet environmental supply chain of green suppliers, which would be effective in reducing effluent produce and improve water sample test qualification rate. The VIKOR value of Yilan County is 1.0000, which is the worst in the pollution control of all the industrial area sewage systems, followed by Taoyuan

Applying health education theory to patient safety programs: three case studies.

Science.gov (United States)

Gilkey, Melissa B; Earp, Jo Anne L; French, Elizabeth A

2008-04-01

Program planning for patient safety is challenging because intervention-oriented surveillance data are not yet widely available to those working in this nascent field. Even so, health educators are uniquely positioned to contribute to patient safety intervention efforts because their theoretical training provides them with a guide for designing and implementing prevention programs. This article demonstrates the utility of applying health education concepts from three prominent patient safety campaigns, including the concepts of risk perception, community participation, and social marketing. The application of these theoretical concepts to patient safety programs suggests that health educators possess a knowledge base and skill set highly relevant to patient safety and that their perspective should be increasingly brought to bear on the design and evaluation of interventions that aim to protect patients from preventable medical error.

Students' Perceptions of an Applied Research Experience in an Undergraduate Exercise Science Course.

Science.gov (United States)

Pearson, Regis C; Crandall, K Jason; Dispennette, Kathryn; Maples, Jill M

2017-01-01

Applied research experiences can provide numerous benefits to undergraduate students, however few studies have assessed the perceptions of Exercise Science (EXS) students to an applied research experience. The purpose of this study was two-fold: 1) to describe the rationale and implementation of an applied research experience into an EXS curriculum and 2) to evaluate EXS undergraduate students' perceptions of an applied research experience. An EXS measurement course was chosen for implementation of an applied research experience. The applied research experience required groups of students to design, implement, and evaluate a student-led research project. Fourteen questions were constructed, tailored to EXS undergraduate students, to assess students' perceptions of the experience. Qualitative analysis was used for all applicable data, with repeated trends noted; quantitative data were collapsed to determine frequencies. There was an overall positive student perception of the experience and 85.7% of students agreed an applied research experience should be continued. 84.7% of students perceived the experience as educationally enriching, while 92.8% reported the experience was academically challenging. This experience allowed students to develop comprehensive solutions to problems that arose throughout the semester; while facilitating communication, collaboration, and problem solving. Students believed research experiences were beneficial, but could be time consuming when paired with other responsibilities. Results suggest an applied research experience has the potential to help further the development of EXS undergraduate students. Understanding student perceptions of an applied research experience may prove useful to faculty interested in engaging students in the research process.

Evaluation of cleaning methods applied in home environments after renovation and remodeling activities

International Nuclear Information System (INIS)

Yiin, L.-M.; Lu, S.-E.; Sannoh, Sulaiman; Lim, B.S.; Rhoads, G.G.

2004-01-01

We conducted a cleaning trial in 40 northern New Jersey homes where home renovation and remodeling (R and R) activities were undertaken. Two cleaning protocols were used in the study: a specific method recommended by the US Department of Housing and Urban Development (HUD), in the 1995 'Guidelines for the Evaluation and Control of Lead-Based Paint Hazards in Housing', using a high-efficiency particulate air (HEPA)-filtered vacuum cleaner and a tri-sodium phosphate solution (TSP); and an alternative method using a household vacuum cleaner and a household detergent. Eligible homes were built before the 1970s with potential lead-based paint and had recent R and R activities without thorough cleaning. The two cleaning protocols were randomly assigned to the participants' homes and followed the HUD-recommended three-step procedure: vacuuming, wet washing, and repeat vacuuming. Wipe sampling was conducted on floor surfaces or windowsills before and after cleaning to evaluate the efficacy. All floor and windowsill data indicated that both methods (TSP/HEPA and non-TSP/non-HEPA) were effective in reducing lead loading on the surfaces (P<0.001). When cleaning was applied to surfaces with initial lead loading above the clearance standards, the reductions were even greater, above 95% for either cleaning method. The mixed-effect model analysis showed no significant difference between the two methods. Baseline lead loading was found to be associated with lead loading reduction significantly on floors (P<0.001) and marginally on windowsills (P=0.077). Such relations were different between the two cleaning methods significantly on floors (P<0.001) and marginally on windowsills (P=0.066), with the TSP/HEPA method being favored for higher baseline levels and the non-TSP/non-HEPA method for lower baseline levels. For the 10 homes with lead abatement, almost all post-cleaning lead loadings were below the standards using either cleaning method. Based on our results, we recommend that

Study on comprehensive evaluation model for nuclear power plant control room layout

International Nuclear Information System (INIS)

Zhu Yiming; Liu Yuan; Fan Huixian

2010-01-01

A comprehensive evaluation model for layout of the main control room of nuclear power plants was proposed. Firstly the design scope and principle for the layout of the main control room were defined based on the standards, and then the index system for the comprehensive evaluation was established. Finally, comprehensive evaluation was carried out for the layout design by applying the fuzzy comprehensive evaluation method in the index system. (authors)

Study of Dynamic Membrane Behavior in Applied DC Electric Field

Science.gov (United States)

Dutta, Prashanta; Morshed, Adnan; Hossan, Mohammad

2017-11-01

Electrodeformation of vesicles can be used as a useful tool to understand the characteristics of biological soft matter, where vesicles immersed in a fluid medium are subjected to an applied electric field. The complex response of the vesicle membrane strongly depends on the conductivity of surrounding fluid, vesicle size and shape, and applied electric field We studied the electrodeformation of vesicles immersed in a fluid media under a short DC electric pulse. An immersed interface method is used to solve the electric field over the domain with conductive or non-conductive vesicles while an immersed boundary scheme is employed to solve fluid flow, fluid-solid interaction, membrane mechanics and vesicle movement. Force analysis on the membrane surface reveals almost linear relation with vesicle size, but highly nonlinear influence of applied field as well as the conductivity ratios inside and outside of the vesicle. Results also point towards an early linear deformation regime followed by an equilibrium stage for the membranes. Moreover, significant influence of the initial aspect ratio of the vesicle on the force distribution is observed across a range of conductivity ratios. Research reported in this publication was supported by the National Institute of General Medical Sciences of the National Institutes of Health under Award Number R01GM122081.

STEM - software test and evaluation methods. A study of failure dependency in diverse software

International Nuclear Information System (INIS)

Bishop, P.G.; Pullen, F.D.

1989-02-01

STEM is a collaborative software reliability project undertaken in partnership with Halden Reactor Project, UKAEA, and the Finnish Technical Research Centre. The objective of STEM is to evaluate a number of fault detection and fault estimation methods which can be applied to high integrity software. This Report presents a study of the observed failure dependencies between faults in diversely produced software. (author)

Applied environmetrics. Simulation applied to the physical environment

Energy Technology Data Exchange (ETDEWEB)

Beer, T

1988-02-01

Environmetrics is the application of quantitative methods to all aspects of the social and natural environment. This includes forecasting, mathematical modelling, data analysis, and statistics. Applied Environmetrics as a discipline involves the analysis of environmental data through the use of packaged, or specially designed computer software. Two case studies of recent implementations of applied environmetrics within the Australian mining industry are dealt with. 3 figs., 5 refs.

Positron Annihilation Ratio Spectroscopy Study of Electric Fields Applied to Positronium at Material Interfaces

Science.gov (United States)

2011-03-01

from 142 ns to a few ns [3:3]. Through the application of positron annihilation lifetime spectroscopy (PALS) on a material, the o-Ps lifetime can be...Force Base, Ohio APPROVED FOR PUBLIC RELEASE; DISTRIBUTION UNLIMITED. POSITRON ANNIHILATION RATIO SPECTROSCOPY STUDY OF ELECTRIC FIELDS APPLIED TO...protection in the United States. AFIT/GNE/ENP/11-M19 POSITRON ANNIHILATION RATIO SPECTROSCOPY STUDY OF ELECTRIC FIELDS APPLIED TO POSITRONIUM AT

Green and sustainable remediation (GSR) evaluation: framework, standards, and tool. A case study in Taiwan.

Science.gov (United States)

Huang, Wen-Yen; Hung, Weiteng; Vu, Chi Thanh; Chen, Wei-Ting; Lai, Jhih-Wei; Lin, Chitsan

2016-11-01

Taiwan has a large number of poorly managed contaminated sites in need of remediation. This study proposes a framework, a set of standards, and a spreadsheet-based evaluation tool for implementing green and sustainable principles into remediation projects and evaluating the projects from this perspective. We performed a case study to understand how the framework would be applied. For the case study, we used a spreadsheet-based evaluation tool (SEFA) and performed field scale cultivation tests on a site contaminated with total petroleum hydrocarbons (TPHs). The site was divided into two lots: one treated by chemical oxidation and the other by bioremediation. We evaluated five core elements of green and sustainable remediation (GSR): energy, air, water resources, materials and wastes, and land and ecosystem. The proposed evaluation tool and field scale cultivation test were found to efficiently assess the effectiveness of the two remediation alternatives. The framework and related tools proposed herein can potentially be used to support decisions about the remediation of contaminated sites taking into account engineering management, cost effectiveness, and social reconciliation.

A Study on Evaluation of Training Program for MCR Operators of SMART Simulator

Energy Technology Data Exchange (ETDEWEB)

Park, Hyun Jun; Lee, Joon Ku; Jeong, Kwang Il [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

It is important to develop a training program by simulators in main control room of nuclear power plants because there is no an operation expert and no operating experience in the pre-construction phase of nuclear power plants. It is also necessary to develop a training program and its evaluation method taking human error into account. The purpose of this study is developing evaluation model of simulators. In a training program, once training requirements are selected, evaluation of training is as important as its implementation. Training effectiveness is available value in a simulator-based environment. The main control room of SMART (System-integrated Modular Advanced ReacTor) is consist of workstation, visual display units such as LDP and FPD based on digital systems. Cognitive behaviors of a high level are required to operators in these man-machine interface system (MMIS). Therefore, it is essential to identify training requirements and to develop its evaluation model. Virtual Environments such as a simulator have utilized by a lot of industries and companies for training and accident prevention. Simulators have three primary benefits. The first is that training by simulators is less expensive than those in real environment. The second is that simulators enable safety enhancement using systematic training program. The third is that simulators provide a preliminary to prevent human error. It is significant to apply TER, TCR, TCE in evaluation of training effect. It is expected that these could be applied to revise training criteria and enable to consider efficiency in terms of cost and benefit.

A Study on Evaluation of Training Program for MCR Operators of SMART Simulator

International Nuclear Information System (INIS)

Park, Hyun Jun; Lee, Joon Ku; Jeong, Kwang Il

2015-01-01

It is important to develop a training program by simulators in main control room of nuclear power plants because there is no an operation expert and no operating experience in the pre-construction phase of nuclear power plants. It is also necessary to develop a training program and its evaluation method taking human error into account. The purpose of this study is developing evaluation model of simulators. In a training program, once training requirements are selected, evaluation of training is as important as its implementation. Training effectiveness is available value in a simulator-based environment. The main control room of SMART (System-integrated Modular Advanced ReacTor) is consist of workstation, visual display units such as LDP and FPD based on digital systems. Cognitive behaviors of a high level are required to operators in these man-machine interface system (MMIS). Therefore, it is essential to identify training requirements and to develop its evaluation model. Virtual Environments such as a simulator have utilized by a lot of industries and companies for training and accident prevention. Simulators have three primary benefits. The first is that training by simulators is less expensive than those in real environment. The second is that simulators enable safety enhancement using systematic training program. The third is that simulators provide a preliminary to prevent human error. It is significant to apply TER, TCR, TCE in evaluation of training effect. It is expected that these could be applied to revise training criteria and enable to consider efficiency in terms of cost and benefit

Analysis of design parameters for crosstalk cancellation filters applied to different loudspeaker configurations

DEFF Research Database (Denmark)

Lacouture Parodi, Yesenia; Rubak, Per

2011-01-01

for crosstalk cancellation filters applied to different loudspeaker configurations has not yet been addressed systematically. A study of three different inversion techniques applied to several loudspeaker arrangements is documented. Least-squares approximations in the frequency and time domains are evaluated...... along with a crosstalk canceler based on minimum-phase approximation with a frequency-independent delay. The three methods were applied to loudspeaker configurations with two channels and the least-squares approaches to configurations with four channels. Several different span angles and elevations were...

Evaluation of diseases survelliance studies after flood disaster in Batman province

Directory of Open Access Journals (Sweden)

Deniz Akgün

2009-03-01

Full Text Available The aim of this study was to evaluate the contagious diseases surveillance studies after the flood disaster between 31.10.2006 and 02.11.2006 in Batman province. After flood disaster, there had been taken some measures about water sanitation, immunization and organization of the health services and the public education issues.Super chlorination procedure had been applied to drinking water in the city center. The free chlorine levels of 890 water specimens from different areas of the province had been measured and the results were between 0.3 to 0.8 ppm. A random 359 specimens were tested biologically and chemically and they have been found eligible to use. Health units of the municipality had been provided with adequate tetanus vaccine in order to inoculate the persons who had been wounded. Children without adequate childhood vaccinations and immunizations were encouraged to complete their vaccinations in the closest dispensaries. A structural questionnaire had been applied with the aim of collecting data about potential contagious diseases in the area. For the following two weeks after the disaster, 0.6 % of the residents were observed to have gastroenteritis. However, the EPI Curve of the gastroenteritis cases do not show a potential epidemic in the province. Active surveillance system which applies by visiting households is important for taking essential preventive measures; besides, early detecting of potential contagious diseases.

Southern African Linguistics and Applied Language Studies

African Journals Online (AJOL)

... (e.g. syntax, phonology, semantics) and applied (e.g. sociolinguistic topics, ... Articles in languages other than English are accompanied by an extended English ... language ecologies post #RhodesMustFall at the University of the Free State ...

Evaluating Executive Strategies (Management Strategies and Teaching-Learning Strategies) of Graduate Curriculum: Case Study in Isfahan University

Science.gov (United States)

Rahmanpour, Muhammad; Ahmadi, Mojtaba; Hatami, Mostafa; Mirzaee, Hamzeh

2017-01-01

The present study seeks to evaluate executive strategies in graduate Curriculum of Isfahan University from the point of view of management and teaching-learning strategies. This study is an applied survey. The population comprised BA students and faculty members of the University of Isfahan. In order to do so, 141 professors and 278 students were…

Dynamic Models Applied to Landslides: Study Case Angangueo, MICHOACÁN, MÉXICO.

Science.gov (United States)

Torres Fernandez, L.; Hernández Madrigal, V. M., , Dr; Capra, L.; Domínguez Mota, F. J., , Dr

2017-12-01

Most existing models for landslide zonification are static type, do not consider the dynamic behavior of the trigger factor. This results in a limited representation of the actual zonation of slope instability, present a short-term validity, cańt be applied for the design of early warning systems, etc. Particularly in Mexico, these models are static because they do not consider triggering factor such as precipitation. In this work, we present a numerical evaluation to know the landslide susceptibility, based on probabilistic methods. Which are based on the generation of time series, which are generated from the meteorological stations, having limited information an interpolation is made to generate the simulation of the precipitation in the zone. The obtained information is integrated in PCRaster and in conjunction with the conditioning factors it is possible to generate a dynamic model. This model will be applied for landslide zoning in the municipality of Angangueo, characterized by frequent logging of debris and mud flow, translational and rotational landslides, detonated by atypical precipitations, such as those recorded in 2010. These caused economic losses and humans. With these models, it would be possible to generate probable scenarios that help the Angangueo's population to reduce the risks and to carry out actions of constant resilience activities.

Applying the World Health Organization Mental Health Action Plan to evaluate policy on addressing co-occurrence of physical and mental illnesses in Australia.

Science.gov (United States)

Happell, Brenda; Platania-Phung, Chris; Webster, Stephanie; McKenna, Brian; Millar, Freyja; Stanton, Robert; Galletly, Cherrie; Castle, David; Furness, Trentham; Liu, Dennis; Scott, David

2015-09-01

The aim of the present study was to document Australian policies on the physical health of people with mental illness and evaluate the capacity of policy to support health needs. A search of state and federal policies on mental and physical illness was conducted, as well as detailed analysis of policy content and the relationships between policies, by applying the World Health Organization Mental Health Action Plan 2013-2020 as an evaluative framework. National policy attention to the physical health of people with mental illness has grown, but there is little interconnection at the national and state levels. State policies across the country are inconsistent, and there is little evidence of consistent policy implementation. A coherent national health policy framework on addressing co-occurring physical and mental illnesses that includes healthcare system reforms and ensuring the interconnectedness of other relevant services should be prioritised.

Applied multidimensional scaling and unfolding

CERN Document Server

Borg, Ingwer; Mair, Patrick

2018-01-01

This book introduces multidimensional scaling (MDS) and unfolding as data analysis techniques for applied researchers. MDS is used for the analysis of proximity data on a set of objects, representing the data as distances between points in a geometric space (usually of two dimensions). Unfolding is a related method that maps preference data (typically evaluative ratings of different persons on a set of objects) as distances between two sets of points (representing the persons and the objects, resp.). This second edition has been completely revised to reflect new developments and the coverage of unfolding has also been substantially expanded. Intended for applied researchers whose main interests are in using these methods as tools for building substantive theories, it discusses numerous applications (classical and recent), highlights practical issues (such as evaluating model fit), presents ways to enforce theoretical expectations for the scaling solutions, and addresses the typical mistakes that MDS/unfoldin...

Hyperspectral imaging applied to complex particulate solids systems

Science.gov (United States)

Bonifazi, Giuseppe; Serranti, Silvia

2008-04-01

HyperSpectral Imaging (HSI) is based on the utilization of an integrated hardware and software (HW&SW) platform embedding conventional imaging and spectroscopy to attain both spatial and spectral information from an object. Although HSI was originally developed for remote sensing, it has recently emerged as a powerful process analytical tool, for non-destructive analysis, in many research and industrial sectors. The possibility to apply on-line HSI based techniques in order to identify and quantify specific particulate solid systems characteristics is presented and critically evaluated. The originally developed HSI based logics can be profitably applied in order to develop fast, reliable and lowcost strategies for: i) quality control of particulate products that must comply with specific chemical, physical and biological constraints, ii) performance evaluation of manufacturing strategies related to processing chains and/or realtime tuning of operative variables and iii) classification-sorting actions addressed to recognize and separate different particulate solid products. Case studies, related to recent advances in the application of HSI to different industrial sectors, as agriculture, food, pharmaceuticals, solid waste handling and recycling, etc. and addressed to specific goals as contaminant detection, defect identification, constituent analysis and quality evaluation are described, according to authors' originally developed application.

Performance evaluation of the EM algorithm applied to radiographic images

International Nuclear Information System (INIS)

Brailean, J.C.; Giger, M.L.; Chen, C.T.; Sullivan, B.J.

1990-01-01

In this paper the authors evaluate the expectation maximization (EM) algorithm, both qualitatively and quantitatively, as a technique for enhancing radiographic images. Previous studies have qualitatively shown the usefulness of the EM algorithm but have failed to quantify and compare its performance with those of other image processing techniques. Recent studies by Loo et al, Ishida et al, and Giger et al, have explained improvements in image quality quantitatively in terms of a signal-to-noise ratio (SNR) derived from signal detection theory. In this study, we take a similar approach in quantifying the effect of the EM algorithm on detection of simulated low-contrast square objects superimposed on radiographic mottle. The SNRs of the original and processed images are calculated taking into account both the human visual system response and the screen-film transfer function as well as a noise component internal to the eye-brain system. The EM algorithm was also implemented on digital screen-film images of test patterns and clinical mammograms

Evaluating the governance model of hardware-dependent software ecosystems - a case study of the axis ecosystem

DEFF Research Database (Denmark)

Wnuk, Krzysztof; Manikas, Konstantinos; Runeson, Per

2014-01-01

specifically, we evaluate the governance model applied by Axis, a network video and surveillance camera producer, that is the platform owner and orchestrator of the Application Development Partner (ADP) software ecosystem. We conduct an exploratory case study collecting data from observations and interviews...... and apply the governance model for prevention and improvement of the software ecosystem health proposed by Jansen and Cusumano. Our results reveal that although the governance actions do not address the majority of their governance model, the ADP ecosystem is considered a growing ecosystem providing...

Positron Annihilation Ratio Spectroscopy (PsARS) Applied to Positronium Formation Studies

Science.gov (United States)

2010-03-01

Positron Annihilation Ratio Spectroscopy (PsARS). These experimental techniques have been used for a variety of military and civilian applications ... POSITRON ANNIHILATION RATIO SPECTROSCOPY (PsARS) APPLIED TO POSITRONIUM FORMATION STUDIES THESIS...of Defense, or the United States Government. AFIT/GNE/ENP/10-M07 POSITRON ANNIHILATION RATIO SPECTROSCOPY

Evaluation of Shifted Excitation Raman Difference Spectroscopy and Comparison to Computational Background Correction Methods Applied to Biochemical Raman Spectra.

Science.gov (United States)

Cordero, Eliana; Korinth, Florian; Stiebing, Clara; Krafft, Christoph; Schie, Iwan W; Popp, Jürgen

2017-07-27

Raman spectroscopy provides label-free biochemical information from tissue samples without complicated sample preparation. The clinical capability of Raman spectroscopy has been demonstrated in a wide range of in vitro and in vivo applications. However, a challenge for in vivo applications is the simultaneous excitation of auto-fluorescence in the majority of tissues of interest, such as liver, bladder, brain, and others. Raman bands are then superimposed on a fluorescence background, which can be several orders of magnitude larger than the Raman signal. To eliminate the disturbing fluorescence background, several approaches are available. Among instrumentational methods shifted excitation Raman difference spectroscopy (SERDS) has been widely applied and studied. Similarly, computational techniques, for instance extended multiplicative scatter correction (EMSC), have also been employed to remove undesired background contributions. Here, we present a theoretical and experimental evaluation and comparison of fluorescence background removal approaches for Raman spectra based on SERDS and EMSC.

Student School-Level Math Knowledge Influence on Applied Mathematics Study Courses

Directory of Open Access Journals (Sweden)

Rima Kriauzienė

2013-08-01

Full Text Available Purpose—to find out the influence of student school-level math knowledge on courses of applied mathematics studies: what is the importance of having a math maturity exam for students, an estimate of social science students’ motivation to learn math, and attendance of seminars. Students who did take the state exam attended more seminars than the students who did not take math exam, and vice versa. Design/methodology/approach—this work describes research which involved persistent MRU Public Administration degree program second-year students. Doing statistical analysis of the data will be a link between school-level mathematics knowledge and attendance activity in seminars and motivation to learn mathematics. Findings—the research is expected to establish a connection between school-level mathematics knowledge and student motivation to learn mathematics. It was found that there is no correlation between student opinions about school mathematics courses and result of their first test. Determine relationship between attendance of exercises and public examinations. Between the stored type of exam and test results are dependent. Determine relationship between exercise attendance and test results, as shown by the calculated correlation coefficient Based on the results, it’s recommended to increase the number of exercises. A more refined analysis of the data is subject to further investigation. Research limitations/implications—this method is just one of the possible ways of application. Practical implications—that kind of research and its methodology can be applied not only to the subject of applied mathematics studies, but also to other natural or social sciences. Originality/Value—empirical experiment data can be used in other studies of Educology nature analysis.

Student School-Level Math Knowledge Influence on Applied Mathematics Study Courses

Directory of Open Access Journals (Sweden)

Tadas Laukevičius

2011-12-01

Full Text Available Purpose—to find out the influence of student school-level math knowledge on courses of applied mathematics studies: what is the importance of having a math maturity exam for students, an estimate of social science students’ motivation to learn math, and attendance of seminars. Students who did take the state exam attended more seminars than the students who did not take math exam, and vice versa.Design/methodology/approach—this work describes research which involved persistent MRU Public Administration degree program second-year students. Doing statistical analysis of the data will be a link between school-level mathematics knowledge and attendance activity in seminars and motivation to learn mathematics.Findings—the research is expected to establish a connection between school-level mathematics knowledge and student motivation to learn mathematics.It was found that there is no correlation between student opinions about school mathematics courses and result of their first test.Determine relationship between attendance of exercises and public examinations.Between the stored type of exam and test results are dependent.Determine relationship between exercise attendance and test results, as shown by the calculated correlation coefficientBased on the results, it’s recommended to increase the number of exercises. A more refined analysis of the data is subject to further investigation.Research limitations/implications—this method is just one of the possible ways of application.Practical implications—that kind of research and its methodology can be applied not only to the subject of applied mathematics studies, but also to other natural or social sciences.Originality/Value—empirical experiment data can be used in other studies of Educology nature analysis.

Analysis of Questionnaires Applied in the Evaluation Process of Academicians in Higher Education Institutes

Science.gov (United States)

Kalayci, Nurdan; Cimen, Orhan

2012-01-01

The aim of this study is to examine the questionnaires used to evaluate teaching performance in higher education institutes and called "Instructor and Course Evaluation Questionnaires (ICEQ)" in terms of questionnaire preparation techniques and components of curriculum. Obtaining at least one ICEQ belonging to any state and private…

Journal of Applied Sciences and Environmental Management - Vol ...

African Journals Online (AJOL)

Journal of Applied Sciences and Environmental Management. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING ... Journal of Applied Sciences and Environmental Management - Vol 22, No 4 (2018) ... Evaluating the effect of mobility speed on the performance of three handover algorithms in ...

Evaluating Evaluation Systems: Policy Levers and Strategies for Studying Implementation of Educator Evaluation. Policy Snapshot

Science.gov (United States)

Matlach, Lauren

2015-01-01

Evaluation studies can provide feedback on implementation, support continuous improvement, and increase understanding of evaluation systems' impact on teaching and learning. Despite the importance of educator evaluation studies, states often need support to prioritize and fund them. Successful studies require expertise, time, and a shared…

Applying the AHP in Health Economic Evaluations of New Technology.

NARCIS (Netherlands)

Hummel, J. Marjan; Steuten, Lotte Maria Gertruda; Groothuis-Oudshoorn, Catharina Gerarda Maria; IJzerman, Maarten Joost

2011-01-01

Much research in health care is devoted to health economical modelling. Even though the Analytic Hierarchy Process (AHP) is increasingly being applied in health care, its value to health economical modelling is still unrecognized. We explored the value of using AHP-derived results in a health

34 CFR 658.4 - What definitions apply to the Undergraduate International Studies and Foreign Language Program?

Science.gov (United States)

2010-07-01

... International Studies and Foreign Language Program? 658.4 Section 658.4 Education Regulations of the Offices of... UNDERGRADUATE INTERNATIONAL STUDIES AND FOREIGN LANGUAGE PROGRAM General § 658.4 What definitions apply to the Undergraduate International Studies and Foreign Language Program? The definitions in 34 CFR 655.4 apply to this...

Evaluation of synthetic hydrocarbons for mark-recapture studies on the red milkweed beetle.

Science.gov (United States)

Ginzel, Matthew D; Hanks, Lawrence M

2002-05-01

This study evaluates the potential for using blends of synthetic hydrocarbons in mark-recapture studies of insects. To test the durability of hydrocarbons, we applied a blend of five straight-chain hydrocarbons (C24, C21, C26. C28, C30) to detached elytra of the red milkweed beetle, Tetraopes tetrophthalmus (Forster) (Coleoptera: Cerambycidae), mounted the elytra on pins, and placed them in an exposed location outdoors. The amount of hydrocarbons on the elytra did not change over time, even after two months of exposure to sun and rain. Synthetic hydrocarbons applied to the elytra of living beetles did not significantly influence their longevity or mating success in a laboratory study. and the amounts of hydrocarbons did not change with age. The invariability of hydrocarbon ratios over time suggests that blends could provide a nearly infinite variety of ratios to mark individual insects uniquely and indelibly with a hydrocarbon "fingerprint." This technique offers a convenient, safe, and durable means of individually marking insects and may find application in field studies of larger bodied insects that are long-lived and sedentary.

Healthy Eating for Life English as a second language curriculum: applying the RE-AIM framework to evaluate a nutrition education intervention targeting cancer risk reduction.

Science.gov (United States)

Martinez, J L; Duncan, L R; Rivers, S E; Bertoli, M C; Latimer-Cheung, A E; Salovey, P

2017-12-01

Medically underserved US immigrants are at an increased risk for death from preventable or curable cancers due to economic, cultural, and/or linguistic barriers to medical care. The purpose of this study was to describe the evaluation of the pilot study of the Healthy Eating for Life (HE4L) English as a second language curriculum. The Reach, Effectiveness Adoption, Implementation, Maintenance (RE-AIM) model was used to design a mixed-methods approach to the evaluation of the HE4L curriculum. Successful implementation was dependent upon enthusiastic teacher and manager support of the curriculum, teachers' ability to flexibly apply the curriculum to meet student needs, and researcher provision of curriculum workbooks. HE4L can be implemented successfully in various adult education settings to teach healthy eating behaviors and English language principles. Scale-up of HE4L may depend on the development of an online version of the curriculum to avoid the costs associated with printing and distributing curriculum materials.

A Study in the Founding of Applied Behavior Analysis Through Its Publications

Science.gov (United States)

Morris, Edward K.; Altus, Deborah E.; Smith, Nathaniel G.

2013-01-01

This article reports a study of the founding of applied behavior analysis through its publications. Our methods included hand searches of sources (e.g., journals, reference lists), search terms (i.e., early, applied, behavioral, research, literature), inclusion criteria (e.g., the field's applied dimension), and (d) challenges to their face and content validity. Our results were 36 articles published between 1959 and 1967 that we organized into 4 groups: 12 in 3 programs of research and 24 others. Our discussion addresses (a) limitations in our method (e.g., the completeness of our search), (b) challenges to the validity of our methods and results (e.g., convergent validity), and (c) priority claims about the field's founding. We conclude that the claims are irresolvable because identification of the founding publications depends significantly on methods and because the field's founding was an evolutionary process. We close with suggestions for future research. PMID:25729133

A study in the founding of applied behavior analysis through its publications.

Science.gov (United States)

Morris, Edward K; Altus, Deborah E; Smith, Nathaniel G

2013-01-01

This article reports a study of the founding of applied behavior analysis through its publications. Our methods included hand searches of sources (e.g., journals, reference lists), search terms (i.e., early, applied, behavioral, research, literature), inclusion criteria (e.g., the field's applied dimension), and (d) challenges to their face and content validity. Our results were 36 articles published between 1959 and 1967 that we organized into 4 groups: 12 in 3 programs of research and 24 others. Our discussion addresses (a) limitations in our method (e.g., the completeness of our search), (b) challenges to the validity of our methods and results (e.g., convergent validity), and (c) priority claims about the field's founding. We conclude that the claims are irresolvable because identification of the founding publications depends significantly on methods and because the field's founding was an evolutionary process. We close with suggestions for future research.

Modelling applied to PET-studies ont blood-brain transfer of 11-C-labelled drugs in the dog

International Nuclear Information System (INIS)

Agon, P.; Kaufman, J.M.

1989-01-01

Positron emission tomograph (PET) allows the 'in vivo' monitoring of changes in tissue concentrations of a labelled compounds. In order to validate the technique for the study of the early distribution of drugs into the braiin occuring following intravenous administration. The distribution in anaesthetized dogs of several 11-C-labelled drugs with known physicochemical and pharmacokinetic properties was studied. Twenty five sequential scans of a single slice of the head were performed using a Neuro-ECAT positron camera over 90 minutes following intravenous administration. Arterial blood samples were obtained for monitoring of blood and plasma radioactivity. Blood-brain transfer of the drugs was also studied after blood-brain barrier disruption by intracarotid infusion of a hyperosmolar mannitol solution. A qualitative evaluation of drug distribution can be done by visual inspection of the radioactivity concentration-time curves obtained for blood and tissues; for a quantitative evaluation a mathematical approach was required. A four compartment unit-membrane model can be suggested as a generally applicable model. For all the drugs studied, a model with 2 compartments described the course of the radioactivity quite well. In experiments with blood-brain barrier disruption the conditions for blood-brain exchange are changed and a 4 compartment model was required to describe adequately the course of the radioactivity. The results obtained when applying these models to sets of data for different drugs, were in good agreement with their known properties. (author). 4 refs.; 4 figs

A Comparative Study of Intensity Markers in Engineering and Applied Linguistics

Science.gov (United States)

Behnam, Biook; Mirzapour, Fatemeh

2012-01-01

Writers use intensity markers as one of strategies in order to negotiate their claims and to make their writings persuasive and credible. This study is an attempt to examine the type, frequency, and functions of intensity markers in research articles of two disciplines of Applied Linguistics and Electrical Engineering by analyzing surface…

Evaluation of a diagnostic flow chart applying medical thoracoscopy, adenosine deaminase and T-SPOT.TB in diagnosis of tuberculous pleural effusion.

Science.gov (United States)

He, Y; Zhang, W; Huang, T; Wang, X; Wang, M

2015-10-01

To evaluate a diagnostic flow chart applying medical thoracoscoy (MT), adenosine deaminase (ADA) and T-SPOT.TB in diagnosis of tuberculous pleural effusion (TPE) at a high TB burden country. 136 patients with pleural effusion (PE) were enrolled and divided into TPE and Non-TPE group. MT (histology), PE ADA and T-SPOT.TB were conducted on all patients. ROC analysis was performed for the best cut-off value of PE ADA in detection of TPE. The diagnostic flow chart applying MT, ADA and T-SPOT.TB was evaluated for improving the limitations of each diagnostic method. ROC analysis showed that the best cut-off value of PE ADA was 30U/L. The sensitivity and specificity of these tests were calculated respectively to be: 71.4% (58.5%-81.6%) and 100% (95.4-100.0%) for MT, 92.9% (83.0-97.2%) and 68.8% (57.9-77.9%) for T-SPOT.TB, and 80.0% (69.6-88.1%) and 92.9% (82.7-98.0%) for PE ADA. The sensitivity, specificity, positive likelihood ratio, negative likelihood ratio, positive predictive value and negative predictive value of the diagnostic flow chart were 96.4% (87.9-99.0%), 96.3% (89.6-98.7%), 25.714, 0.037, 97.4 and 94.9, respectively. The diagnostic flow chart applying MT, ADA and T-SPOT.TB is an accurate and rapid diagnostic method in detection of TPE.

Development of a tracking method for augmented reality applied to NPP maintenance work and its experimental evaluation

International Nuclear Information System (INIS)

Bian, Zhiqiang; Ishii, Hirotake; Shimoda, Hiroshi; Yoshikawa, Hidekazu; Morishita, Yoshitsugu; Kanehira, Yoshiki; Izumi, Masanori

2007-01-01

Nuclear power plants (NPPs) must be maintained periodically. Their maintenance efficiency must be improved and human error must be reduced simultaneously to improve NPPs' competitive capability in electricity markets. Although Augmented Reality (AR) offers great possibilities to support NPP maintenance work, some difficulties exist for application of AR to actual work support because current AR systems cannot be implemented in NPP environments without technical improvement. There are several kinds of problems such as recognition distance, tracking accuracy, and a complex working environment when applying AR to NPP field work support. Considerable extension of tracking distance and improvement of accuracy are particularly desired because NPPs are large scale indoor environments. This study designed a linecode marker, a new type of paper-based marker, along with recognition and tracking algorithms for it to resolve these problems. In contrast to conventional paper-based makers, such as square markers and circle markers, the linecode marker is not merely easier to set up in complex industrial environments: it also enables the use of AR in industrial plants because of its considerable tracking-performance improvement. To evaluate tracking accuracy, the trackable distance, and the tracking speed of the proposed tracking method, an evaluation experiment was conducted in a large room. The experiment results show that the tracking distance is extended extremely over that of the traditional marker-based tracking method: tracking accuracy improved to 20 cm over a 10 m distance. The running speed of the tracking can be as fast as 15 frames per second using a laptop PC. (author)

Automated Plasma Spray (APS) process feasibility study: Plasma spray process development and evaluation

Science.gov (United States)

Fetheroff, C. W.; Derkacs, T.; Matay, I. M.

1979-01-01

An automated plasma spray (APS) process was developed to apply two layer (NiCrAlY and ZrO2-12Y2O3) thermal-barrier coatings to aircraft gas turbine engine blade airfoils. The APS process hardware consists of four subsystems: a mechanical blade positioner incorporating two interlaced six-degree-of-freedom assemblies; a noncoherent optical metrology subsystem; a microprocessor-based adaptive system controller; and commercial plasma spray equipment. Over fifty JT9D first stage turbine blades specimens were coated with the APS process in preliminary checkout and evaluation studies. The best of the preliminary specimens achieved an overall coating thickness uniformity of + or - 53 micrometers, much better than is achievable manually. Factors limiting this performance were identified and process modifications were initiated accordingly. Comparative evaluations of coating thickness uniformity for manually sprayed and APS coated specimens were initiated. One of the preliminary evaluation specimens was subjected to a torch test and metallographic evaluation.

Developmental evaluation applying complexity concepts to enhance innovation and use

CERN Document Server

Patton, Michael Quinn

2011-01-01

Developmental evaluation (DE) offers a powerful approach to monitoring and supporting social innovations by working in partnership with program decision makers. In this book, eminent authority Michael Quinn Patton shows how to conduct evaluations within a DE framework. Patton draws on insights about complex dynamic systems, uncertainty, nonlinearity, and emergence. He illustrates how DE can be used for a range of purposes: ongoing program development, adapting effective principles of practice to local contexts, generating innovations and taking them to scale, and facilitating rapid response in crisis situations. Students and practicing evaluators will appreciate the book's extensive case examples and stories, cartoons, clear writing style, "closer look" sidebars, and summary tables. Provided is essential guidance for making evaluations useful, practical, and credible in support of social change.

Evaluating Electronic Customer Relationship Management Performance: Case Studies from Persian Automotive and Computer Industry

OpenAIRE

Safari, Narges; Safari, Fariba; Olesen, Karin; Shahmehr, Fatemeh

2016-01-01

This research paper investigates the influence of industry on electronic customer relationship management (e-CRM) performance. A case study approach with two cases was applied to evaluate the influence of e-CRM on customer behavioral and attitudinal loyalty along with customer pyramid. The cases covered two industries consisting of computer and automotive industries. For investigating customer behavioral loyalty and customer pyramid companies database were computed while for examining custome...

Evaluation of multi-outcome longitudinal studies

DEFF Research Database (Denmark)

Jensen, Signe Marie; Pipper, Christian Bressen; Ritz, Christian

2015-01-01

Evaluation of intervention effects on multiple outcomes is a common scenario in clinical studies. In longitudinal studies, such evaluation is a challenge if one wishes to adequately capture simultaneous data behavior. In this situation, a common approach is to analyze each outcome separately...... conservative conclusions. We propose an alternative approach for multiplicity adjustment that incorporates dependence between outcomes, resulting in an appreciably less conservative evaluation. The ability of the proposed method to control the familywise error rate is evaluated in a simulation study...

Methodological proposal for identification and evaluation of environmental aspects and impacts of nuclear facilities of IPEN, Sao Paulo, SP, Brazil: a case study applied to the Nuclear Fuel Center

International Nuclear Information System (INIS)

Mattos, Luis Antonio Terribile de

2013-01-01

This work presents an application of Failure Mode Effect Analysis (FMEA) to the process of identification of environmental aspects and impacts as a part of implementation and maintenance of an Environmental Management System (EMS) in accordance with the NBR ISO 14001 standard. Also, it can contribute, as a complement, to the evaluation and improvement of safety of the installation focused. The study was applied to the Nuclear Fuel Center (CCN) of Nuclear and Energy Research Institute (IPEN), situated at the Campus of University of Sao Paulo, Brazil. The CCN facility has the objective of promoting scientific research and of producing nuclear fuel elements for the IEA-R1 Research Reactor. To identify the environmental aspects of the facility activities, products, and services, a systematic data collection was carried out by means of personal interviews, documents, reports and operation data records consulting. Furthermore, the processes and their interactions, failure modes, besides their causes and effects to the environment, were identified. As a result of a careful evaluation of these causes it was possible to identify and to classify the major potential environmental impacts, in order to set up and put in practice an Environmental Management System for the installation under study. The results have demonstrated the validity of the FMEA application to nuclear facility processes, identifying environmental aspects and impacts, whose controls are critical to achieve compliance with the environmental requirements of the Integrated Management System of IPEN. It was demonstrated that the methodology used in this work is a powerful management tool for resolving issues related to the conformity with applicable regulatory and legal requirements of the Brazilian Nuclear Energy Commission (CNEN) and the Brazilian Institute of Environment (IBAMA). (author)

Development of the safety evaluation system in the respects of organizational factors and workers' consciousness. Pt. 3. On know-how of its applying to an engineering company

International Nuclear Information System (INIS)

Sasou, Kunihide; Hasegawa, Naoko; Hirose, Ayako; Tsuge, Tadashi; Hayase, Kenichi; Takano, Kenichi

2003-01-01

'Safety Culture' has been paid attentions since Chernobyl accident in 1986. The criticality accident in 1999 and other kinds of scandals involving big name companies in Japan make them realize the importance of safety culture. CRIEPI is developing a safety evaluation system. The evaluation is based on the answers to the questionnaire and their statistical analysis such as t-test principal component analysis. This report discusses know-how when applying this evaluation technique to an engineering company whose jobs are ranging from production of products to engineering services to customers. About 15% engineers of the company answered the questionnaire and the answers were statistically analyzed. The results show the followings. First, the evaluation technique is not suitable to evaluations between departments with different kinds of jobs in each. That is because risk on the business of each department differs from each other due to the differences in the kinds of jobs. This indicates that the evaluation technique should be applied to groups whose jobs and risks on their business are equal. Second, the technique is applicable to branches with some kinds of jobs. A branch consists of small groups with different jobs but the ratios of the groups in a branch are nearly equal to those in other branches. Therefore, risks in each branch are equal. Finally, the technique should consider the frequency in which risks of a group to be tested realize. The larger the frequency in which workers face them is, the more the workers pay attention to safety issues. These findings indicate that the safety evaluation system needs several kinds of the standards of comparisons to be applied to evaluate safety levels in wide range of industrial companies. (author)

The Evaluator Effect in Usability Tests

DEFF Research Database (Denmark)

Jacobsen, Niels Ebbe; Hertzum, Morten; John, Bonnie E.

1998-01-01

Usability tests are applied in industry to evaluate systems and in research as a yardstick for other usability evaluation methods. However, one potential threat to the reliability of usability tests has been left unaddressed: the evaluator effect. In this study, four evaluators analyzed four vide...

Effects of applying three-dimensional seismic isolation system on the seismic design of FBR

International Nuclear Information System (INIS)

Hirata, Kazuta; Yabana, Shuichi; Kanazawa, Kenji; Matsuda, Akihiro

1997-01-01

In this study conceptional three-dimensional seismic isolation system for fast breeder reactor (FBR) is proposed. Effects of applying three-dimensional seismic isolation system on the seismic design for the FBR equipment are evaluated quantitatively. From the evaluation, it is concluded following effects are expected by applying the three-dimensional seismic isolation system to the FBR and the effects are evaluated quantitatively. (1) Reduction of membrane thickness of the reactor vessel (2) Suppression of uplift of fuels by reducing vertical seismic response of the core (3) Reduction of the supports for the piping system (4) Three-dimensional base isolation system for the whole reactor building is advantageous to the combined isolation system of horizontal base isolation for the reactor building and vertical isolation for the equipment. (author)

A risk assessment tool applied to the study of shale gas resources

Energy Technology Data Exchange (ETDEWEB)

Veiguela, Miguel [Mining, Energy and Materials Engineering School, University of Oviedo (Spain); Hurtado, Antonio; Eguilior, Sonsoles; Recreo, Fernando [Environment Department, CIEMAT, Madrid (Spain); Roqueñi, Nieves [Mining, Energy and Materials Engineering School, University of Oviedo (Spain); Loredo, Jorge, E-mail: jloredo@uniovi.es [Mining, Energy and Materials Engineering School, University of Oviedo (Spain)

2016-11-15

The implementation of a risk assessment tool with the capacity to evaluate the risks for health, safety and the environment (HSE) from extraction of non-conventional fossil fuel resources by the hydraulic fracturing (fracking) technique can be a useful tool to boost development and progress of the technology and winning public trust and acceptance of this. At the early project stages, the lack of data related the selection of non-conventional gas deposits makes it difficult the use of existing approaches to risk assessment of fluids injected into geologic formations. The qualitative risk assessment tool developed in this work is based on the approach that shale gas exploitation risk is dependent on both the geologic site and the technological aspects. It follows from the Oldenburg's ‘Screening and Ranking Framework (SRF)’ developed to evaluate potential geologic carbon dioxide (CO{sub 2}) storage sites. These two global characteristics: (1) characteristics centered on the natural aspects of the site and (2) characteristics centered on the technological aspects of the Project, have been evaluated through user input of Property values, which define Attributes, which define the Characteristics. In order to carry out an individual evaluation of each of the characteristics and the elements of the model, the tool has been implemented in a spreadsheet. The proposed model has been applied to a site with potential for the exploitation of shale gas in Asturias (northwestern Spain) with tree different technological options to test the approach. - Highlights: • The proposed methodology is a risk assessment useful tool for shale gas projects. • The tool is addressed to the early stages of decision making processes. • The risk assessment of a site is made through a qualitative estimation. • Different weights are assigned to each specific natural and technological property. • The uncertainty associated to the current knowledge is considered.

A risk assessment tool applied to the study of shale gas resources

International Nuclear Information System (INIS)

Veiguela, Miguel; Hurtado, Antonio; Eguilior, Sonsoles; Recreo, Fernando; Roqueñi, Nieves; Loredo, Jorge

2016-01-01

The implementation of a risk assessment tool with the capacity to evaluate the risks for health, safety and the environment (HSE) from extraction of non-conventional fossil fuel resources by the hydraulic fracturing (fracking) technique can be a useful tool to boost development and progress of the technology and winning public trust and acceptance of this. At the early project stages, the lack of data related the selection of non-conventional gas deposits makes it difficult the use of existing approaches to risk assessment of fluids injected into geologic formations. The qualitative risk assessment tool developed in this work is based on the approach that shale gas exploitation risk is dependent on both the geologic site and the technological aspects. It follows from the Oldenburg's ‘Screening and Ranking Framework (SRF)’ developed to evaluate potential geologic carbon dioxide (CO_2) storage sites. These two global characteristics: (1) characteristics centered on the natural aspects of the site and (2) characteristics centered on the technological aspects of the Project, have been evaluated through user input of Property values, which define Attributes, which define the Characteristics. In order to carry out an individual evaluation of each of the characteristics and the elements of the model, the tool has been implemented in a spreadsheet. The proposed model has been applied to a site with potential for the exploitation of shale gas in Asturias (northwestern Spain) with tree different technological options to test the approach. - Highlights: • The proposed methodology is a risk assessment useful tool for shale gas projects. • The tool is addressed to the early stages of decision making processes. • The risk assessment of a site is made through a qualitative estimation. • Different weights are assigned to each specific natural and technological property. • The uncertainty associated to the current knowledge is considered.

Determining significance in social impact assessments (SIA) by applying both technical and participatory approaches: Methodology development and application in a case study of the concentrated solar power plant NOORO I in Morocco

International Nuclear Information System (INIS)

Terrapon-Pfaff, Julia; Fink, Thomas; Viebahn, Peter; Jamea, El Mostafa

2017-01-01

One of the main objectives of impact assessments is to identify potentially significant impacts. However, determining this significance has received very limited attention as a procedural step in social impact assessments. Consequently, only limited research and documentation exists on approaches, survey tools and evaluation methods, especially with regard to participatory approaches and combined participatory-technical approaches. This study aims to address this research gap by developing and applying a joined participatory and technical impact significance evaluation. The approach is applied in a case study which analysed the livelihood impacts of the large-scale concentrated solar power plant NOOR O I in Ouarzazate, Morocco. The analysis shows that although different approaches and significance criteria must be applied when involving both local stakeholders and experts, the linked analysis offers more robust results and an improved basis for decision-making. Furthermore, it was observed in the case study that impacts affecting the social, cultural and political spheres were more often considered significant than impacts affecting the physical and material livelihood dimensions. Regarding sustainability assessments of large-scale renewable energy plants, these findings underline the importance (as for other large-scale infrastructure developments) of placing greater emphasis on the inclusion of social aspects in impact assessments. - Highlights: •Significance evaluation in social impact assessments lacks participatory aspects. •Combined participatory and technical impact significance evaluation developed •Application in a case study to analyse the livelihood impacts of a CSP plant •Involvement of local stakeholders and technical experts results in robust findings. •Social, cultural and political issues are often more relevant than material aspects.

Nuclear quadrupole resonance applied for arsenic oxide study

International Nuclear Information System (INIS)

Correia, J.A.S.

1991-04-01

The objectives of this study are mounting a pulsed Nuclear Quadrupole Resonance (NQR) building a flow cryostat capable of varying the temperature continuously from 77 K to 340 K and using the spectrometer and the cryostat to study the polycrystalline arsenic oxide. The spin-lattice relaxation time (T 1 ), the spin-spin relaxation time (T 2 ) and the resonance frequency are obtained as a function of temperature. These data are obtained in 77 to 330 K interval. The relaxation times are obtained using the spin echo technique. The spin echo phenomenon is due to refocusing spins, when a 180 0 C pulse is applied after a 90 0 C pulse. The spin-lattice relaxation time is obtained using the plot of echo amplitude versus the repetition time. The spin-spin relaxation time is obtained using the plot of echo amplitude versus the separation between the 90 0 C - 180 0 C pulses. The theory developed by Bayer is used to explain the spin-lattice relaxation time and the frequency temperature dependence. The spin-spin relaxation time is discussed using the Bloch equations. (author)

Identifying 'unhealthy' food advertising on television: a case study applying the UK Nutrient Profile model.

Science.gov (United States)

Jenkin, Gabrielle; Wilson, Nick; Hermanson, Nicole

2009-05-01

To evaluate the feasibility of the UK Nutrient Profile (NP) model for identifying 'unhealthy' food advertisements using a case study of New Zealand television advertisements. Four weeks of weekday television from 15.30 hours to 18.30 hours was videotaped from a state-owned (free-to-air) television channel popular with children. Food advertisements were identified and their nutritional information collected in accordance with the requirements of the NP model. Nutrient information was obtained from a variety of sources including food labels, company websites and a national nutritional database. From the 60 h sample of weekday afternoon television, there were 1893 advertisements, of which 483 were for food products or retailers. After applying the NP model, 66 % of these were classified as advertising high-fat, high-salt and high-sugar (HFSS) foods; 28 % were classified as advertising non-HFSS foods; and the remaining 2 % were unclassifiable. More than half (53 %) of the HFSS food advertisements were for 'mixed meal' items promoted by major fast-food franchises. The advertising of non-HFSS food was sparse, covering a narrow range of food groups, with no advertisements for fresh fruit or vegetables. Despite the NP model having some design limitations in classifying real-world televised food advertisements, it was easily applied to this sample and could clearly identify HFSS products. Policy makers who do not wish to completely restrict food advertising to children outright should consider using this NP model for regulating food advertising.

Study on Feasibility of Applying Function Approximation Moment Method to Achieve Reliability-Based Design Optimization

International Nuclear Information System (INIS)

Huh, Jae Sung; Kwak, Byung Man

2011-01-01

Robust optimization or reliability-based design optimization are some of the methodologies that are employed to take into account the uncertainties of a system at the design stage. For applying such methodologies to solve industrial problems, accurate and efficient methods for estimating statistical moments and failure probability are required, and further, the results of sensitivity analysis, which is needed for searching direction during the optimization process, should also be accurate. The aim of this study is to employ the function approximation moment method into the sensitivity analysis formulation, which is expressed as an integral form, to verify the accuracy of the sensitivity results, and to solve a typical problem of reliability-based design optimization. These results are compared with those of other moment methods, and the feasibility of the function approximation moment method is verified. The sensitivity analysis formula with integral form is the efficient formulation for evaluating sensitivity because any additional function calculation is not needed provided the failure probability or statistical moments are calculated

Managing change : Case study: HAMK University of Applied Sciences, Valkeakoski

OpenAIRE

Chau Thi Tra, Mi

2012-01-01

In response to changes imposed by the Finnish government on the Univer-sities of Applied Sciences system in the near future, HAMK has proactive-ly adopted several programmes to prepare for future challenges and rein-force the organization’s competitiveness. However, organizational change has never been an easy, straightforward issue and how to manage change effectively has become an interest to the organization. The study aims at providing suggestions for a more successful change im-pleme...

EIA and EINP. Evaluation study

International Nuclear Information System (INIS)

Lande, R.W.I. van der; De Vries, E.F.

2001-01-01

The evaluation study on the title subjects concerns two subsidy tools in the Netherlands: the Energy Investment Rebate (EIA, abbreviated in Dutch) and the Subsidy for Energy in the non-profit sector and other special sectors (EINP, abbreviated in Dutch). The central question in the evaluation was to what extent did the EIA and EINP contribute to the original policy targets and at what costs. The evaluation has been carried out by means of a desk study, interviews, and an analysis of bottlenecks and possible solutions. [nl

FEEDBACK LINEARISATION APPLIED ON A HYDRAULIC

DEFF Research Database (Denmark)

Andersen, Torben Ole; Hansen, Michael Rygaard; Pedersen, Henrik C.

2005-01-01

is on developing and applying several different feedback linearisation (FL) controllers to the individual servo actuators in a hydraulically driven servo robot to evaluate and compare their possiblities and limitations. This is done based on both simulation and experimental results.......Generally most hydraulic systems are intrensically non-linear, why applying linear control techniques typically results in conservatively dimensioned controllers to obtain stable performance. Non-linear control techniques have the potential of overcoming these problems, and in this paper the focus...

Human errors evaluation for muster in emergency situations applying human error probability index (HEPI, in the oil company warehouse in Hamadan City

Directory of Open Access Journals (Sweden)

2012-12-01

Full Text Available Introduction: Emergency situation is one of the influencing factors on human error. The aim of this research was purpose to evaluate human error in emergency situation of fire and explosion at the oil company warehouse in Hamadan city applying human error probability index (HEPI. . Material and Method: First, the scenario of emergency situation of those situation of fire and explosion at the oil company warehouse was designed and then maneuver against, was performed. The scaled questionnaire of muster for the maneuver was completed in the next stage. Collected data were analyzed to calculate the probability success for the 18 actions required in an emergency situation from starting point of the muster until the latest action to temporary sheltersafe. .Result: The result showed that the highest probability of error occurrence was related to make safe workplace (evaluation phase with 32.4 % and lowest probability of occurrence error in detection alarm (awareness phase with 1.8 %, probability. The highest severity of error was in the evaluation phase and the lowest severity of error was in the awareness and recovery phase. Maximum risk level was related to the evaluating exit routes and selecting one route and choosy another exit route and minimum risk level was related to the four evaluation phases. . Conclusion: To reduce the risk of reaction in the exit phases of an emergency situation, the following actions are recommended, based on the finding in this study: A periodic evaluation of the exit phase and modifying them if necessary, conducting more maneuvers and analyzing this results along with a sufficient feedback to the employees.

Efficacy of applying self-assessment of larviciding operation, Chabahar, Iran

Science.gov (United States)

2012-01-01

Background Appropriate supervision, along with availability of an effective system for monitoring and evaluation, is a crucial requirement to guarantee sufficient coverage and quality of malaria vector control procedures. This study evaluated the efficacy of self-assessment practice as a possible innovative method towards achieving high coverage and excellent quality of larviciding operation in Iran. Methods The research was conducted on the randomly selected rural health centre of Kanmbel Soliman with 10 staff and 30 villages, in three main steps: (i) assessment of effectiveness of larviciding operations in the study areas before intervention through external assessment by a research team; (ii) self-assessment of larviciding operations (intervention) by staff every quarter for three rounds; and, (iii) determining the effectiveness of applying self-assessment of larviciding operations in the study areas. Two toolkits were used for self-assessment and external evaluation. The impact of self-assessment of larviciding operations was measured by two indicators: percentage of missed breeding habitats and cleaned breeding habitats among randomly selected breeding sites. Moreover, the correlation coefficients were measured between self-assessment measures and scores from external evaluation. The correlation coefficient and Mann Whitney test were used to analyse data. Results Following the utilization of self-assessment, the percentage of missed breeding habitats decreased significantly from 14.23% to 1.91% (P self-assessment in performance of vector control; the maximum effect of intervention were seen in an action plan for monitoring and evaluation of larviciding operations at field level, geographical reconnaissance for the registration of breeding habitats and worker skills related to larviciding. Before intervention, the results of self-assessment practice were compatible with external evaluation in 76.3% of 139 reviewed reports of self-assessment. After intervention

Evaluation of the AGCU Expressmarker 16 and 22 PCR Amplification Kits Using Biological Samples Applied to FTA Micro Cards in Reduced Volume Direct PCR Amplification Reactions

Directory of Open Access Journals (Sweden)

Samantha J Ogden

2015-01-01

Full Text Available This study evaluated the performance of the  Wuxi AGCU ScienTech Incorporation (HuiShan, Wuxi, China AGCU Expressmarker 16 (EX 16 and 22 (EX22 short tandem repeat (STR amplification kits in reduced reaction volumes using direct polymerase chain reaction (PCR amplification workflows. The commercially available PowerPlex® 21 (PP21 System (Promega, Wisconsin, USA, which follows similar direct workflows, was used as a reference. Anticoagulate blood applied to chemically impregnated  FTA TM Micro Cards (GE Healthcare UK Limited, Amersham Place, Little Chalfont, Buckinghamshire, HP7 9NA, UK was used to represent a complex biological sample. Allelic concordance, first-pass success rate, average peak heights, heterozygous peak height ratios (HPHRs, and intracolor and intercolor peak height balance were determined. In reduced volume PCR reactions, the performances of both the EX16 and EX22 STR amplification kits were comparable to that of the PP21 System. The level of performance was maintained at PCR reaction volumes, which are 40% of that recommended. The EX22 and PP21 System kits possess comparable overlapping genome coverage. This study evaluated the performance of the AGCU EX16 and EX22 STR amplification kits in reduced PCR reaction volumes using direct workflows in combination with whole blood applied to FTA TM Micro Cards. Allelic concordance, first-pass success rate, average peak heights, HPHRs, and intracolor and intercolor peak height balance were determined. A concordance analysis was completed that compared the performance of the EX16 and EX22 kits using human blood applied to FTA Micro Cards in combination with full, half, and reduced PCR reaction volumes. The PP21 System (Promega was used as a reference kit. Where appropriate, the distributions of data were assessed using the Shapiro-Wilk test. For normally-distributed data, statistics were calculated using analysis of variance (ANOVA and for nonparametric data the Wilcoxon

Resources on Quantitative/Statistical Research for Applied Linguists

Science.gov (United States)

Brown, James Dean

2004-01-01

The purpose of this review article is to survey and evaluate existing books on quantitative/statistical research in applied linguistics. The article begins by explaining the types of texts that will not be reviewed, then it briefly describes nine books that address how to do quantitative/statistical applied linguistics research. The review then…

Assessment of functional conditions of basketball and football players during the load by applying the model of integrated evaluation.

Science.gov (United States)

Zumbakytė-Šermukšnienė, Renata; Kajėnienė, Alma; Vainoras, Alfonsas; Berškienė, Kristina; Augutienė, Viktorija

2010-01-01

We consider the human body as an adaptable, complex, and dynamic system capable of organizing itself, though there is none, the only one, factor inside the system capable of doing this job. Making use of the computerized ECG analysis system "Kaunas-load" with parallel registration of ECG carrying out body motor characteristics, ABP, or other processes characterizing hemodynamics enable one to reveal and evaluate the synergistic aspects of essential systems of the human body what particularly extends the possibilities of functional diagnostics. The aim of the study was to determine the features of alterations in the functional condition of basketball and football players and nonathletes during the bicycle ergometry test by applying the model of evaluation of the functional condition of the human body. The study population consisted of 266 healthy athletes and nonathletes. Groups of male basketball players, male football players, male nonathletes, female basketball players, and female nonathletes were studied. A computerized ECG analysis system "Kaunas-load" that is capable of both registering and analyzing the power developed by the subject and 12-lead ECG synchronically were used for evaluating the functional condition of the CVS. The subject did a computer-based bicycle ergometry test. The following ECG parameters at rest and throughout the load - HR, JT interval, and the deduced JT/RR ratio index that reflects the condition between regulatory and supplying systems - were evaluated. After measuring ABP, the pulse amplitude (S-D) was evaluated. The pulse blood pressure ratio amplitude (S-D)/S that depicts the connection between the periphery and regulatory systems was also evaluated. Speeds of changes in physiological parameters during physical load were evaluated too. Heart rate and JT/RR ratio of athletes at the rest and during load were lower, and JT interval of rest was longer and became shorter more slowly during load, compared to that of healthy nonathletes

Educational technology "Anatomy and Vital Signs": Evaluation study of content, appearance and usability.

Science.gov (United States)

de Góes, Fernanda dos Santos Nogueira; Fonseca, Luciana Mara Monti; de Camargo, Rosangela Andrade Aukar; de Oliveira, Gustavo Faria; Felipe, Helena Reche

2015-11-01

The use of new technology has recently grown considerably as an increasing number of college students using Internet. In nursing education, the personal computer and the Internet facilitate teaching theoretical and practical knowledge. Evaluate an educational technology known as "Anatomy and Vital Signs" with respect to content, appearance and usability. This was a first stage evaluation-by specialists to verify content and functioning, prior to a second validation as to learning by students. A methodological study in which instructional technologists (11 participants) and nursing specialists (17 participants) used the technology in an unguided manner and completed three questionnaires. The evaluation was measured by the difference between disagreement and agreement for each statement in the questionnaires. Most of the items were positively evaluated at a level higher than 70% by most of the evaluators except for the following usability criteria: grouping by shape, minimum actions and user control, which did not attain the 70% agreement level among instructional technologists. The evaluation was useful to improve the technology and guarantee suitable product for nursing education. It may be a reliable educational tool for nursing education that applies technological resources. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

An Orchestrating Evaluation of Complex Educational Technologies: a Case Study of a CSCL System

Directory of Open Access Journals (Sweden)

Luis P. Prieto

2014-06-01

Full Text Available As digital technologies permeate every aspect of our lives, the complexity of the educational settings, and of the technological support we use within them, unceasingly rises. This increased complexity, along with the need for educational practitioners to apply such technologies within multi-constraint authentic settings, has given rise to the notion of technology-enhanced learning practice as “orchestration of learning”. However, at the same time, the complexity involved in evaluating the benefits of such educational technologies has also increased, prompting questions about the way evaluators can cope with the different places, technologies, informants and issues involved in their evaluation activity. By proposing the notion of “orchestrating evaluation”, this paper tries to reconcile the often disparate “front office accounts” of research publications and the “shop floor practice” of evaluation of educational technology, through the case study of evaluating a system to help teachers in coordinating computer-supported collaborative learning (CSCL scenarios. We reuse an internationally-evaluated conceptual framework of “orchestration aspects” (design, management, adaptation, pragmatism, etc. to structure the case‟s narrative, showing how the original evaluation questions and methods were modulated in the face of the multiple (authentic evaluation setting constraints.

Study on evaluation of containment capability of glove box under fire accident (2)

International Nuclear Information System (INIS)

Abe, Hitoshi; Watanabe, Koji; Tashiro, Shinsuke; Uchiyama, Gunzo

2007-11-01

In the MOX fuel fabrication facility, MOX is required to be handled in glove box to sustain containment of MOX into the facility. In case of fire in the facility, the containment capability of glove box may be deteriorated by pyrolysis or combustion of the plastic materials as components of glove box caused by thermal stress from flame. The purpose of this study is to examine pyrolysis and combustion properties of the materials for applying them to quantitative evaluation method for the containment capability of glove box under fire. This report summarize experimental results about the properties under the air condition and investigation of evaluation model for estimating time-course of deteriorating containment capability of glove box under fire. (author)

Applying Real Options for Evaluating Investments in ERP Systems

Science.gov (United States)

Nakagane, Jun; Sekozawa, Teruji

This paper intends to verify effectiveness of real options approach for evaluating investments in Enterprise Resource Planning systems (ERP) and proves how important it is to disclose shadow options potentially embedded in ERP investment. The net present value (NPV) method is principally adopted to evaluate the value of ERP. However, the NPV method assumes no uncertainties exist in the object. It doesn't satisfy the current business circumstances which are filled with dynamic issues. Since the 1990s the effectiveness of option pricing models for Information System (IS) investment to solve issues in the NPV method has been discussed in the IS literature. This paper presents 3 business cases to review the practical advantages of such techniques for IS investments, especially ERP investments. The first case is EDI development. We evaluate the project by a new approach with lighting one of shadow options, EDI implementation. In the second case we reveal an ERP investment has an “expanding option” in a case of eliminating redundancy. The third case describes an option to contract which is deliberately slotted in ERP development to prepare transferring a manufacturing facility.

Undiscovered resource evaluation: Towards applying a systematic approach to uranium

International Nuclear Information System (INIS)

Fairclough, M.; Katona, L.

2014-01-01

Evaluations of potential mineral resource supply range from spatial to aspatial, and everything in between across a range of scales. They also range from qualitative to quantitative with similar hybrid examples across the spectrum. These can compromise detailed deposit-specific reserve and resource calculations, target generative processes and estimates of potential endowments in a broad geographic or geological area. All are estimates until the ore has been discovered and extracted. Contemporary national or provincial scale evaluations of mineral potential are relatively advanced and some include uranium, such as those for South Australia undertaken by the State Geological Survey. These play an important role in land-use planning as well as attracting exploration investment and range from datato knowledge-driven approaches. Studies have been undertaken for the Mt Painter region, as well as for adjacent basins. The process of estimating large-scale potential mineral endowments is critical for national and international planning purposes but is a relatively recent and less common undertaking. In many cases, except at a general level, the data and knowledge for a relatively immature terrain is lacking, requiring assessment by analogy with other areas. Commencing in the 1980s, the United States Geological Survey, and subsequently the Geological Survey of Canada evaluated a range of commodities ranging from copper to hydrocarbons with a view to security of supply. They developed innovative approaches to, as far as practical, reduce the uncertainty and maximise the reproducibility of the calculations in information-poor regions. Yet the approach to uranium was relatively ad hoc and incomplete (such as the US Department of Energy NURE project). Other historic attempts, such as the IAEA-NEA International Uranium Resource Evaluation Project (IUREP) in the 1970s, were mainly qualitative. While there is still no systematic global evaluation of undiscovered uranium resources

Comprehensive Mechanisms for Combustion Chemistry: An Experimental and Numerical Study with Emphasis on Applied Sensitivity Analysis

Energy Technology Data Exchange (ETDEWEB)

Dryer, Frederick L.

2009-04-10

This project was an integrated experimental/numerical effort to study pyrolysis and oxidation reactions and mechanisms for small-molecule hydrocarbon structures under conditions representative of combustion environments. The experimental aspects of the work were conducted in large-diameter flow reactors, at 0.3 to 18 atm pressure, 500 to 1100 K temperature, and 10^-2 to 2 seconds reaction time. Experiments were also conducted to determine reference laminar flame speeds using a premixed laminar stagnation flame experiment and particle image velocimetry, as well as pressurized bomb experiments. Flow reactor data for oxidation experiments include: (1)adiabatic/isothermal species time-histories of a reaction under fixed initial pressure, temperature, and composition; to determine the species present after a fixed reaction time, initial pressure; (2)species distributions with varying initial reaction temperature; (3)perturbations of a well-defined reaction systems (e.g. CO/H₂/O₂ or H₂/O₂)by the addition of small amounts of an additive species. Radical scavenging techniques are applied to determine unimolecular decomposition rates from pyrolysis experiments. Laminar flame speed measurements are determined as a function of equivalence ratio, dilution, and unburned gas temperature at 1 atm pressure. Hierarchical, comprehensive mechanistic construction methods were applied to develop detailed kinetic mechanisms which describe the measurements and literature kinetic data. Modeling using well-defined and validated mechanisms for the CO/H₂/Oxidant systems and perturbations of oxidation experiments by small amounts of additives were also used to derive absolute reaction rates and to investigate the compatibility of published elementary kinetic and thermochemical information. Numerical tools were developed and applied to assess the importance of individual elementary reactions to the predictive performance of the

Implementing health research through academic and clinical partnerships: a realistic evaluation of the Collaborations for Leadership in Applied Health Research and Care (CLAHRC

Directory of Open Access Journals (Sweden)

Rycroft-Malone Jo

2011-07-01

Full Text Available Abstract Background The English National Health Service has made a major investment in nine partnerships between higher education institutions and local health services called Collaborations for Leadership in Applied Health Research and Care (CLAHRC. They have been funded to increase capacity and capability to produce and implement research through sustained interactions between academics and health services. CLAHRCs provide a natural 'test bed' for exploring questions about research implementation within a partnership model of delivery. This protocol describes an externally funded evaluation that focuses on implementation mechanisms and processes within three CLAHRCs. It seeks to uncover what works, for whom, how, and in what circumstances. Design and methods This study is a longitudinal three-phase, multi-method realistic evaluation, which deliberately aims to explore the boundaries around knowledge use in context. The evaluation funder wishes to see it conducted for the process of learning, not for judging performance. The study is underpinned by a conceptual framework that combines the Promoting Action on Research Implementation in Health Services and Knowledge to Action frameworks to reflect the complexities of implementation. Three participating CLARHCS will provide in-depth comparative case studies of research implementation using multiple data collection methods including interviews, observation, documents, and publicly available data to test and refine hypotheses over four rounds of data collection. We will test the wider applicability of emerging findings with a wider community using an interpretative forum. Discussion The idea that collaboration between academics and services might lead to more applicable health research that is actually used in practice is theoretically and intuitively appealing; however the evidence for it is limited. Our evaluation is designed to capture the processes and impacts of collaborative approaches for

Implementing health research through academic and clinical partnerships: a realistic evaluation of the Collaborations for Leadership in Applied Health Research and Care (CLAHRC).

Science.gov (United States)

Rycroft-Malone, Jo; Wilkinson, Joyce E; Burton, Christopher R; Andrews, Gavin; Ariss, Steven; Baker, Richard; Dopson, Sue; Graham, Ian; Harvey, Gill; Martin, Graham; McCormack, Brendan G; Staniszewska, Sophie; Thompson, Carl

2011-07-19

The English National Health Service has made a major investment in nine partnerships between higher education institutions and local health services called Collaborations for Leadership in Applied Health Research and Care (CLAHRC). They have been funded to increase capacity and capability to produce and implement research through sustained interactions between academics and health services. CLAHRCs provide a natural 'test bed' for exploring questions about research implementation within a partnership model of delivery. This protocol describes an externally funded evaluation that focuses on implementation mechanisms and processes within three CLAHRCs. It seeks to uncover what works, for whom, how, and in what circumstances. This study is a longitudinal three-phase, multi-method realistic evaluation, which deliberately aims to explore the boundaries around knowledge use in context. The evaluation funder wishes to see it conducted for the process of learning, not for judging performance. The study is underpinned by a conceptual framework that combines the Promoting Action on Research Implementation in Health Services and Knowledge to Action frameworks to reflect the complexities of implementation. Three participating CLARHCS will provide in-depth comparative case studies of research implementation using multiple data collection methods including interviews, observation, documents, and publicly available data to test and refine hypotheses over four rounds of data collection. We will test the wider applicability of emerging findings with a wider community using an interpretative forum. The idea that collaboration between academics and services might lead to more applicable health research that is actually used in practice is theoretically and intuitively appealing; however the evidence for it is limited. Our evaluation is designed to capture the processes and impacts of collaborative approaches for implementing research, and therefore should contribute to the evidence

Applying Bayesian Statistics to Educational Evaluation. Theoretical Paper No. 62.

Science.gov (United States)

Brumet, Michael E.

Bayesian statistical inference is unfamiliar to many educational evaluators. While the classical model is useful in educational research, it is not as useful in evaluation because of the need to identify solutions to practical problems based on a wide spectrum of information. The reason Bayesian analysis is effective for decision making is that it…

The Integration of Socio-Economic Indicators in the CASBEE-UD Evaluation System: A Case Study

Directory of Open Access Journals (Sweden)

Francesco Cappai

2018-03-01

Full Text Available The use of tools to measure the degree of sustainability of cities is the approach that receives the most attention in developed countries. However, studies of evaluation tools at the neighborhood level reveal that there are many weaknesses in the most widely-used evaluation systems (LEED-ND, BREEAM Communities, CASBEE-UD. There are ambiguities and gaps in weighting and in scoring and in most cases, there is no mechanism for local adaptability and participation. The purpose of this study is to provide an overview of the current situation by highlighting the strengths and weaknesses of these evaluation tools in order to integrate social and economic aspects for the improvement of the CASBEE-UD (neighborhood level evaluation tool. The selection of socio-economic aspects was made through the use of a multi criteria Analysis Hierarchical Process (AHP and a Geographic Integration System (GIS. The results of this case study indicate that most evaluation tools need to be revised because most do not include socio-economic aspects. We have demonstrated that applying the CASBEE-UD assessment tool integrated with socio-economic aspects to four boroughs in the City of Montreal can measure success by addressing the objectives of sustainable development.

Hardware Transactional Memory Optimization Guidelines, Applied to Ordered Maps

DEFF Research Database (Denmark)

Bonnichsen, Lars Frydendal; Probst, Christian W.; Karlsson, Sven

2015-01-01

efficiently requires reasoning about those differences. In this paper we present 5 guidelines for applying hardware transactional memory efficiently, and apply the guidelines to BT-trees, a concurrent ordered map. Evaluating BT-trees on standard benchmarks shows that they are up to 5.3 times faster than...

Applied Research Study

Science.gov (United States)

Leach, Ronald J.

1997-01-01

The purpose of this project was to study the feasibility of reusing major components of a software system that had been used to control the operations of a spacecraft launched in the 1980s. The study was done in the context of a ground data processing system that was to be rehosted from a large mainframe to an inexpensive workstation. The study concluded that a systematic approach using inexpensive tools could aid in the reengineering process by identifying a set of certified reusable components. The study also developed procedures for determining duplicate versions of software, which were created because of inadequate naming conventions. Such procedures reduced reengineering costs by approximately 19.4 percent.

Methodological contribution to lean office implementation applied to a supply chain department : longitudinal case study analysis in a supply company of the health sector

OpenAIRE

Reinhard , Eric

2017-01-01

Like most industrial companies, the Paul Hartmann company firstly deployed the Lean approach in factories. The implementation of Lean Office basic principles is decided through the Office Excellence method (Kugel, 2010) in the procurement support department. This method applied in some major German companies since 2002 has not been scientifically tested yet. Our research aims at testing this method with a unique case study approach and evaluating its completeness in comparison to the Lean Off...

Study of peripheral circulation in non-pregnant, pregnant and pre-eclamptic women using applied potential tomography.

Science.gov (United States)

Ahmed, Badreldeen

2004-08-01

Profound changes are known to occur in the cardiovascular system during pregnancy, involving an increase in cardiac output and a fall in peripheral resistance. In some women these adaptations may be inappropriate and this may result in pregnancy-induced hypertension and pre-eclampsia. The aims of the study were to evaluate the relatively new, non-invasive technique of applied potential tomography (APT) in measurements of peripheral blood flow, to study peripheral blood flow in a sample of non-pregnant, pregnant and pre-eclamptic women, and to investigate whether the adaptive changes in the peripheral circulation are different in pre-eclampsia compared with normal pregnancy. Applied potential tomography was used to assess peripheral vascular reactivity, by monitoring fluid distribution in calf muscles during postural change. The APT technique was able to detect peripheral vasoconstriction in response to an increase in intramural pressure brought about by passive lowering of the leg (peripheral mechanisms). The peripheral vasoconstriction response was found to be more prominent in woman with pre-eclampsia. The presence of a local reflex in the lower limb had been postulated and the effect of this reflex on the peripheral circulation could be detected using APT, regardless of how it was initiated. In normal pregnant women this reflex was diminished when compared to non-pregnant women, which might contribute to the reduction in peripheral vascular resistance seen in normal pregnancy. This reflex was defective in pre-eclampsia and this lack of adaptation may be a local reflex contributing to the raised peripheral resistance, which in turn may be a factor in high blood pressure in pre-eclampsia.

Evaluation of biexponential relaxation processes by magnetic resonance imaging. A phantom study

DEFF Research Database (Denmark)

Kjaer, L; Thomsen, C; Larsson, H B

1988-01-01

Despite the complexity of biologic tissues, a monoexponential behaviour is usually assumed when estimating relaxation processes in vivo by magnetic resonance imaging (MRI). This study was designed to evaluate the potential of biexponential decomposition of T1 and T2 relaxation curves obtained at 1...... echoes. Applying biexponential curve analysis, a significant deviation from a monoexponential behaviour was recognized at a ratio of corresponding relaxation rates of about 3 and 2, estimating T1 and T2 relaxation, respectively (p less than 0.01, F-test). Requiring an SD less than or equal to 10 per cent...

Feasibility of applied gaming during interdisciplinary rehabilitation for patients with complex chronic pain and fatigue complaints : A mixed-methods study

NARCIS (Netherlands)

Vugts, M.A.P.; Joosen, M.C.W.; van Bergen, A.H.M.M.; Vrijhoef, H.J.M.

2016-01-01

Background: Applied gaming holds potential as a convenient and engaging means for the delivery of behavioral interventions. For developing and evaluating feasible computer-based interventions, policy makers and designers rely on limited knowledge about what causes variation in usage. Objective: In

Avisalmvac: evaluation studies of stability and toxicity

Directory of Open Access Journals (Sweden)

Daniela Botus,

2008-12-01

Full Text Available In Pasteur Institute laboratories there was developed AVISALMVAC, a vaccine against avian Salmonella, a biological product that contains S. enteritidis and S. typhimurium bacterin, with oil adjuvant. This paper presents the results of the studies regarding the stability and toxicity evaluation of this vaccine stored under conditions recommended by the manufacturer (2-80C at the end of the period of validity. The vaccine stability was assessed by serological and histopathological analysis of samples from SPF chickens vaccinated with the product at the end of the period of validity. The study of Avisalmvac toxicity was carried out by inoculation of the product or its components on Vero cell monolayer, and the effects were microscopically recorded or by MTT test, applied at 6 days post-inoculation. Antibody titers recorded at 2 and 3 weeks post vaccination demonstrated the vaccine ability (used after an year since manufacture to induce synthesis of specific antibodies and therefore, the product stability was proven. Histopathological examinations carried out on samples taken at 18 days post vaccinationfrom the vaccination site (skeletal muscle and skin and spleen, did not show any lesions associated to vaccination with Avisalmvac. The cytotoxicity analysis made by inoculating the vaccine or its components on Vero cell monolayer and the microscopic examination did not record visible cytopathic effects for any vaccine dilutions or vaccine components. The cell metabolism evaluation by MTT assay made at 6 days after vaccine/vaccine components inoculation on Vero monolayer, shown the ability of the vaccine and oil adjuvant to stimulate cell metabolism, and a certain degree of toxicity / inhibition of dehydrogenase metabolism associated to one of emulsifier but at dilutions higher than those used in the vaccine formula.

Applied mathematics

CERN Document Server

Logan, J David

2013-01-01

Praise for the Third Edition"Future mathematicians, scientists, and engineers should find the book to be an excellent introductory text for coursework or self-study as well as worth its shelf space for reference." -MAA Reviews Applied Mathematics, Fourth Edition is a thoroughly updated and revised edition on the applications of modeling and analyzing natural, social, and technological processes. The book covers a wide range of key topics in mathematical methods and modeling and highlights the connections between mathematics and the applied and nat

Resources on quantitative/statistical research for applied linguists

OpenAIRE

Brown , James Dean

2004-01-01

Abstract The purpose of this review article is to survey and evaluate existing books on quantitative/statistical research in applied linguistics. The article begins by explaining the types of texts that will not be reviewed, then it briefly describes nine books that address how to do quantitative/statistical applied linguistics research. The review then compares (in prose and tables) the general characteris...

Metrological evaluation of characterization methods applied to nuclear fuels

International Nuclear Information System (INIS)

Faeda, Kelly Cristina Martins; Lameiras, Fernando Soares; Camarano, Denise das Merces; Ferreira, Ricardo Alberto Neto; Migliorini, Fabricio Lima; Carneiro, Luciana Capanema Silva; Silva, Egonn Hendrigo Carvalho

2010-01-01

In manufacturing the nuclear fuel, characterizations are performed in order to assure the minimization of harmful effects. The uranium dioxide is the most used substance as nuclear reactor fuel because of many advantages, such as: high stability even when it is in contact with water at high temperatures, high fusion point, and high capacity to retain fission products. Several methods are used for characterization of nuclear fuels, such as thermogravimetric analysis for the ratio O / U, penetration-immersion method, helium pycnometer and mercury porosimetry for the density and porosity, BET method for the specific surface, chemical analyses for relevant impurities, and the laser flash method for thermophysical properties. Specific tools are needed to control the diameter and the sphericity of the microspheres and the properties of the coating layers (thickness, density, and degree of anisotropy). Other methods can also give information, such as scanning and transmission electron microscopy, X-ray diffraction, microanalysis, and mass spectroscopy of secondary ions for chemical analysis. The accuracy of measurement and level of uncertainty of the resulting data are important. This work describes a general metrological characterization of some techniques applied to the characterization of nuclear fuel. Sources of measurement uncertainty were analyzed. The purpose is to summarize selected properties of UO 2 that have been studied by CDTN in a program of fuel development for Pressurized Water Reactors (PWR). The selected properties are crucial for thermalhydraulic codes to study basic design accidents. The thermal characterization (thermal diffusivity and thermal conductivity) and the penetration immersion method (density and open porosity) of UO 2 samples were focused. The thermal characterization of UO 2 samples was determined by the laser flash method between room temperature and 448 K. The adaptive Monte Carlo Method was used to obtain the endpoints of the

Metrological evaluation of characterization methods applied to nuclear fuels

Energy Technology Data Exchange (ETDEWEB)

Faeda, Kelly Cristina Martins; Lameiras, Fernando Soares; Camarano, Denise das Merces; Ferreira, Ricardo Alberto Neto; Migliorini, Fabricio Lima; Carneiro, Luciana Capanema Silva; Silva, Egonn Hendrigo Carvalho, E-mail: kellyfisica@gmail.co, E-mail: fernando.lameiras@pq.cnpq.b, E-mail: dmc@cdtn.b, E-mail: ranf@cdtn.b, E-mail: flmigliorini@hotmail.co, E-mail: lucsc@hotmail.co, E-mail: egonn@ufmg.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2010-07-01

In manufacturing the nuclear fuel, characterizations are performed in order to assure the minimization of harmful effects. The uranium dioxide is the most used substance as nuclear reactor fuel because of many advantages, such as: high stability even when it is in contact with water at high temperatures, high fusion point, and high capacity to retain fission products. Several methods are used for characterization of nuclear fuels, such as thermogravimetric analysis for the ratio O / U, penetration-immersion method, helium pycnometer and mercury porosimetry for the density and porosity, BET method for the specific surface, chemical analyses for relevant impurities, and the laser flash method for thermophysical properties. Specific tools are needed to control the diameter and the sphericity of the microspheres and the properties of the coating layers (thickness, density, and degree of anisotropy). Other methods can also give information, such as scanning and transmission electron microscopy, X-ray diffraction, microanalysis, and mass spectroscopy of secondary ions for chemical analysis. The accuracy of measurement and level of uncertainty of the resulting data are important. This work describes a general metrological characterization of some techniques applied to the characterization of nuclear fuel. Sources of measurement uncertainty were analyzed. The purpose is to summarize selected properties of UO{sub 2} that have been studied by CDTN in a program of fuel development for Pressurized Water Reactors (PWR). The selected properties are crucial for thermalhydraulic codes to study basic design accidents. The thermal characterization (thermal diffusivity and thermal conductivity) and the penetration immersion method (density and open porosity) of UO{sub 2} samples were focused. The thermal characterization of UO{sub 2} samples was determined by the laser flash method between room temperature and 448 K. The adaptive Monte Carlo Method was used to obtain the endpoints of

Guidelines for writing applied case studies in sport and exercise psychology

OpenAIRE

Keegan, Richard James

2017-01-01

While there has been a significant expansion of continued professional development opportunities in recent years, there has often, historically, been a reluctance for sport and exercise psychologists to both share, and receive feedback on their professional practice (Cotterill, Weston and Breslin, 2016). The recent development of the new Case Studies in Sport and Exercise Psychology journal, a flagship journal of the Association for Applied Sport Psychology, supports an increasing appetite fo...

The reduction method of statistic scale applied to study of climatic change

International Nuclear Information System (INIS)

Bernal Suarez, Nestor Ricardo; Molina Lizcano, Alicia; Martinez Collantes, Jorge; Pabon Jose Daniel

2000-01-01

In climate change studies the global circulation models of the atmosphere (GCMAs) enable one to simulate the global climate, with the field variables being represented on a grid points 300 km apart. One particular interest concerns the simulation of possible changes in rainfall and surface air temperature due to an assumed increase of greenhouse gases. However, the models yield the climatic projections on grid points that in most cases do not correspond to the sites of major interest. To achieve local estimates of the climatological variables, methods like the one known as statistical down scaling are applied. In this article we show a case in point by applying canonical correlation analysis (CCA) to the Guajira Region in the northeast of Colombia

An Evaluation of Applying Knowledge Base to Academic Information Service

OpenAIRE

Seok-Hyoung Lee; Hwan-Min Kim; Ho-Seop Choe

2013-01-01

Through a series of precise text handling processes, including automatic extraction of information from documents with knowledge from various fields, recognition of entity names, detection of core topics, analysis of the relations between the extracted information and topics, and automatic inference of new knowledge, the most efficient knowledge base of the relevant field is created, and plans to apply these to the information knowledge management and service are the core requirements necessa...

A comparative study for different shielding material composition and beam geometry applied to PET facilities: simulated transmission curves

Energy Technology Data Exchange (ETDEWEB)

Hoff, Gabriela [Pontificia Univ. Catolica do Rio Grande do Sul (PUCRS), Porto Alegre, RS (Brazil). Grupo de Experimentacao e Simulacao Computacional em Fisica Medica; Costa, Paulo Roberto, E-mail: pcosta@if.usp.br [Universidade de Sao Paulo (IF/USP), SP (Brazil). Dept. de Fisica Nuclear. Lab. de Dosimetria das Radiacoes e Fisica Medica

2013-03-15

The aim of this work is to simulate transmission data for different beam geometry and material composition in order to evaluate the effect of these parameters on transmission curves. The simulations are focused on outgoing spectra for shielding barriers used in PET facilities. The behavior of the transmission was evaluated as a function of the shielding material composition and thickness using Geant4 Monte Carlo code, version 9.2 p 03.The application was benchmarked for barited mortar and compared to The American Association of Physicists in Medicine (AAPM) data for lead. Their influence on the transmission curves as well the study of the influence of the shielding material composition and beam geometry on the outgoing spectra were performed. Characteristics of transmitted spectra, such as shape, average energy and Half-Value Layer (HVL), were also evaluated. The Geant4 toolkit benchmark for the energy resulting from the positron annihilation phenomena and its application in transmission curves description shown good agreement between data published by American Association on Physicists in Medicine task group 108 and experimental data published by Brazil. The transmission properties for different material compositions were also studied and have shown low dependency with the considered thicknesses. The broad and narrow beams configuration presented significant differences on the result. The fitting parameter for determining the transmission curves equations, according to Archer model is presented for different material. As conclusion were defined that beam geometry has significant influence and the composition has low influence on transmission curves for shielding design for the range of energy applied to PET. (author)

A comparative study for different shielding material composition and beam geometry applied to PET facilities: simulated transmission curves

International Nuclear Information System (INIS)

Hoff, Gabriela; Costa, Paulo Roberto

2013-01-01

The aim of this work is to simulate transmission data for different beam geometry and material composition in order to evaluate the effect of these parameters on transmission curves. The simulations are focused on outgoing spectra for shielding barriers used in PET facilities. The behavior of the transmission was evaluated as a function of the shielding material composition and thickness using Geant4 Monte Carlo code, version 9.2 p 03.The application was benchmarked for barited mortar and compared to The American Association of Physicists in Medicine (AAPM) data for lead. Their influence on the transmission curves as well the study of the influence of the shielding material composition and beam geometry on the outgoing spectra were performed. Characteristics of transmitted spectra, such as shape, average energy and Half-Value Layer (HVL), were also evaluated. The Geant4 toolkit benchmark for the energy resulting from the positron annihilation phenomena and its application in transmission curves description shown good agreement between data published by American Association on Physicists in Medicine task group 108 and experimental data published by Brazil. The transmission properties for different material compositions were also studied and have shown low dependency with the considered thicknesses. The broad and narrow beams configuration presented significant differences on the result. The fitting parameter for determining the transmission curves equations, according to Archer model is presented for different material. As conclusion were defined that beam geometry has significant influence and the composition has low influence on transmission curves for shielding design for the range of energy applied to PET. (author)

Applying and evaluating computer-animated tutors

Science.gov (United States)

Massaro, Dominic W.; Bosseler, Alexis; Stone, Patrick S.; Connors, Pamela

2002-05-01

We have developed computer-assisted speech and language tutors for deaf, hard of hearing, and autistic children. Our language-training program utilizes our computer-animated talking head, Baldi, as the conversational agent, who guides students through a variety of exercises designed to teach vocabulary and grammer, to improve speech articulation, and to develop linguistic and phonological awareness. Baldi is an accurate three-dimensional animated talking head appropriately aligned with either synthesized or natural speech. Baldi has a tongue and palate, which can be displayed by making his skin transparent. Two specific language-training programs have been evaluated to determine if they improve word learning and speech articulation. The results indicate that the programs are effective in teaching receptive and productive language. Advantages of utilizing a computer-animated agent as a language tutor are the popularity of computers and embodied conversational agents with autistic kids, the perpetual availability of the program, and individualized instruction. Students enjoy working with Baldi because he offers extreme patience, he doesn't become angry, tired, or bored, and he is in effect a perpetual teaching machine. The results indicate that the psychology and technology of Baldi holds great promise in language learning and speech therapy. [Work supported by NSF Grant Nos. CDA-9726363 and BCS-9905176 and Public Health Service Grant No. PHS R01 DC00236.

Applied photometry, radiometry, and measurements of optical losses

CERN Document Server

Bukshtab, Michael

2012-01-01

Applied Photometry, Radiometry, and Measurements of Optical Losses reviews and analyzes physical concepts of radiation transfer, providing quantitative foundation for the means of measurements of optical losses, which affect propagation and distribution of light waves in various media and in diverse optical systems and components. The comprehensive analysis of advanced methodologies for low-loss detection is outlined in comparison with the classic photometric and radiometric observations, having a broad range of techniques examined and summarized: from interferometric and calorimetric, resonator and polarization, phase-shift and ring-down decay, wavelength and frequency modulation to pulse separation and resonant, acousto-optic and emissive - subsequently compared to direct and balancing methods for studying free-space and polarization optics, fibers and waveguides. The material is focused on applying optical methods and procedures for evaluation of transparent, reflecting, scattering, absorbing, and aggregat...

Study of the Effect of Burnable Poison Particles Applying in a Pebble Bed HTR

International Nuclear Information System (INIS)

Wei Chunlin; Zhao Jing; Zhang Jian; Xia Bing

2014-01-01

In pebble bed high temperature gas cooled reactors (HTR), spherical fuel elements pass through the core several times to balance the burnup process in the fuel region, resulting in an acceptable shape and peak factor of power density in the simulation analysis. In contrast, when fuel elements pass through the core only once, the peak of power density occurs at the top of the core and its value is too high to be safe. These indicators/parameters can be improved by incorporating burnable poison in the fuel elements under certain conditions. In the current study, burnable poison particles (BPPs) in fuel elements are evaluated. In spite of the strong absorption capability of "1"0B, BPPs can decrease the depletion speed and increase the duration of "1"0B because of the self-shielding effect, resulting in improved shape and peak factor of power distribution. Several BPPs with different radius are discussed in power distribution, following the calculation for a full-scale reactor core with modified VSOP code. According the result, applying BPPs on fuel pebbles is an effective means to improve the distribution of the power density under one-through fuel load in HTR. (author)

Participatory ergonomics applied in installation work

NARCIS (Netherlands)

Jong, A.M. de; Vink, P.

2002-01-01

This paper evaluates a step-by-step participatory approach to better work, applied in reducing the musculoskeletal workload in installation work. To arrive at a reduction in workload, a steering group led the project through the following steps: Introduction: defining the goal and informing all 7000

MD simulations to evaluate effects of applied tensile strain on irradiation-induced defect production at various PKA energies

International Nuclear Information System (INIS)

Miyashiro, S.; Fujita, S.; Okita, T.; Okuda, H.

2012-01-01

Highlights: ► Strain effects on defect formation were evaluated at various PKA energies by MD. ► Radiation-induced defects were increased numerically by external strain. ► Enhanced formation of larger clusters causes the numerical increase of defects. ► Strain influence on the number of defects was greatest at about 20 keV PKA. ► Cluster size, which is mostly affected by strain, was greater with higher PKA energy. - Abstract: Molecular Dynamics (MD) simulations were conducted to investigate the influence of applied tensile strain on defect production during cascade damages at various Primary Knock-on Atom (PKA) energies of 1–30 keV. When 1% strain was applied, the number of surviving defects increased at PKA energies higher than 5 keV, although they did not increase at 1 keV. The rate of increase by strain application was higher with higher PKA energy, and attained the maximum at 20 keV PKA energy with a subsequent gradual decrease at 30 keV PKA energy The cluster size, mostly affected by strain, was larger with higher PKA energy, although clusters with fewer than seven interstitials did not increase in number at any PKA energy.

Palestinian researchers apply evaluation lessons to land use project ...

International Development Research Centre (IDRC) Digital Library (Canada)

2011-02-01

Feb 1, 2011 ... Hosted by the World Bank's Operations Evaluation Department, and Carleton University's Faculty of Public Affairs and Management, ... presents a systematic approach that puts their knowledge in context and fills any gaps.

Applying evolutionary anthropology.

Science.gov (United States)

Gibson, Mhairi A; Lawson, David W

2015-01-01

Evolutionary anthropology provides a powerful theoretical framework for understanding how both current environments and legacies of past selection shape human behavioral diversity. This integrative and pluralistic field, combining ethnographic, demographic, and sociological methods, has provided new insights into the ultimate forces and proximate pathways that guide human adaptation and variation. Here, we present the argument that evolutionary anthropological studies of human behavior also hold great, largely untapped, potential to guide the design, implementation, and evaluation of social and public health policy. Focusing on the key anthropological themes of reproduction, production, and distribution we highlight classic and recent research demonstrating the value of an evolutionary perspective to improving human well-being. The challenge now comes in transforming relevance into action and, for that, evolutionary behavioral anthropologists will need to forge deeper connections with other applied social scientists and policy-makers. We are hopeful that these developments are underway and that, with the current tide of enthusiasm for evidence-based approaches to policy, evolutionary anthropology is well positioned to make a strong contribution. © 2015 Wiley Periodicals, Inc.

Applying Evolutionary Anthropology

Science.gov (United States)

Gibson, Mhairi A; Lawson, David W

2015-01-01

Evolutionary anthropology provides a powerful theoretical framework for understanding how both current environments and legacies of past selection shape human behavioral diversity. This integrative and pluralistic field, combining ethnographic, demographic, and sociological methods, has provided new insights into the ultimate forces and proximate pathways that guide human adaptation and variation. Here, we present the argument that evolutionary anthropological studies of human behavior also hold great, largely untapped, potential to guide the design, implementation, and evaluation of social and public health policy. Focusing on the key anthropological themes of reproduction, production, and distribution we highlight classic and recent research demonstrating the value of an evolutionary perspective to improving human well-being. The challenge now comes in transforming relevance into action and, for that, evolutionary behavioral anthropologists will need to forge deeper connections with other applied social scientists and policy-makers. We are hopeful that these developments are underway and that, with the current tide of enthusiasm for evidence-based approaches to policy, evolutionary anthropology is well positioned to make a strong contribution. PMID:25684561

Can legal research benefit from evaluation studies?

Directory of Open Access Journals (Sweden)

Frans L. Leeuw

2011-01-01

Full Text Available The article describes what evaluation studies have to offer to legal research. Several cases and types of evaluations are presented, in relation to legal or semi-legal questions. Also, a short overview of the contemporary history of evaluation studies is presented. Finally, it will address the question of how to ensure that in legal research and in legal training attention is paid to theories, designs and methods of evaluation studies.

Intraoperative Injection vs Sponge-applied Mitomycin C during Trabeculectomy: One-year Study.

Science.gov (United States)

S Khouri, Albert; Huang, Grace; Y Huang, Linda

2017-01-01

To determine the safety and efficacy of intraoperative injection of mitomycin C (MMC) against conventional sponge-applied MMC during trabeculectomy. This study was a retrospective, comparative case series. Thirty eyes with primary open-angle glaucoma underwent consecutive trabeculectomies with MMC injection (injection group), and thirty eyes with sponge-applied MMC were as controls (sponge group). Data were collected preoperatively and postoperatively at 1 day, 1 week, 1 month, 3 months, 6 months, and 1 year after surgery. Demographic data, applanation intraocular pressure (IOP), best-corrected visual acuity (VA), number of glaucoma medications, postoperative interventions, postoperative complications, and number of visits within 3 months were recorded. In order to stratify data, proportion of eyes achieving >30% IOP reduction from baseline with or without glaucoma medications was calculated and defined as surgical success. Mean IOP reduction at 1 year was significant in both the injection and sponge groups from baseline (46.8 and 37.8% respectively). The injection group had overall lower postoperative IOP and comparable complete treatment success, defined as achieving >30% IOP reduction without glaucoma medications (p = 0.941). The number of postoperative visits within 3 months and the proportion of eyes needing 5-fluorouracil (5-FU) intervention were significantly lower in the injection group (p = 0.03, p = 0.04 respectively). Injection of MMC was as safe and effective as sponge application with comparable estimated complete treatment success, less need for visits within 3 months, and 5-FU intervention. Surgeons may consider intraopera-tive injection of MMC in appropriate patient cohorts given comparable safety and efficacy and several advantages over traditional sponge application. Further study in a prospective, larger, long-term manner is necessary to assess this modality. How to cite this article: Khouri AS, Huang G, Huang LY. Intraoperative Injection vs

Nuclear magnetic resonance applied to the study of polymeric nano composites

International Nuclear Information System (INIS)

Tavares, Maria Ines Bruno

2011-01-01

Polymers and nanoparticles based nano composites were prepared by intercalation by solution. The obtained nano composites were characterized mainly by the nuclear magnetic spectroscopy (NMR), applying the analysis of carbon-13 (polymeric matrix), silicon-29 (nanoparticle), and by determination of spin-lattice relaxation of the hydrogen nucleus (T 1 H) (polymeric matrix). The NMR have presented a promising technique in the characterization of the nano charge dispersion in the studied polymeric matrixes.

Study of evaluation techniques of software testing and V and V in Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Youn, Cheong; Baek, Y. W.; Kim, H. C.; Shin, C. Y.; Park, N. J. [Chungnam Nationl Univ., Taejon (Korea, Republic of)

2000-03-15

The study of activities to solve software safety and quality must be executed in base of establishing software development process for digitalized nuclear plant. Especially study of software testing and verification and validation must executed. For this purpose methodologies and tools which can improve software qualities are evaluated and software testing and V and V which can be applied to software life cycle are investigated. This study establish a guideline that can assure software safety and reliability requirements in digitalized nuclear plant systems and can be used as a guidebook of software development process to assure software quality many software development organization.

ANP applied to electronics engineering project selection

International Nuclear Information System (INIS)

Habib, M.

2010-01-01

Project selection in Electronics engineering is a complex decision-making process. This research paper illustrates an application of ANP/AHP process. The AHP (Analytic Hierarchy Process) is employed to break down large unstructured decision problems into manageable and measureable components. The ANP, as the general form of AHP, is powerful to deal with complex decisions where interdependence exists in a decision model. The research paper discusses the use of the ANP, a general form of Saaty's analytic Network process, as a model to evaluate the value of competing Electronics projects. The research paper concludes with a case study describing the implementation of this model at an engineering college, including data based on the actual use of the decision making model. The case study helps to verify that AHP is an effective and efficient decision-making tool. A major contribution of this work is to provide a methodology for assessing the best project. Despite a number of publications applying AHP in project selection, this is probably the first time that an attempt has been made to apply AHP in an electronics project selection in an engineering university environment. (author)

Capability Approach for well-being Evaluation in Regional Development Planning : Case Study in Magelang Regency. Central java, Indonesia

NARCIS (Netherlands)

Pramono, Retno Widodo Dwi

2016-01-01

The thesis uses Amartya Sen’s Capability Approach (1993, 2000) to devise a set of criteria to evaluate the well-being and quality of life of economic groups in a case study of Magelang, a small rural area in Central Java, Indonesia. In applying this method, the researcher examines how the spatial

3D scanning applied in the evaluation of large plastic deformation

Directory of Open Access Journals (Sweden)

Márcio Eduardo Silveira

2012-01-01

Full Text Available Crash test are experimental studies demanded by specialized agencies in order to evaluate the performance of a component (or entire vehicle when subjected to an impact. The results, often highly destructive, produce large deformations in the product. The use of numerical simulation in initial stages of a project is essential to reduce costs. One difficulty in validating numerical results involves the correlation between the level and the deformation mode of the component, since it is a highly nonlinear simulation in which various parameters can affect the results. The main objective of this study was to propose a methodology to correlate the result of crash tests of a fuel tank with the numerical simulations, using an optical 3D scanner. The results are promising, and the methodology implemented would be used for any products that involve large deformations.

Evaluation of geophysical borehole studies

International Nuclear Information System (INIS)

Brotzen, O.; Duran, O.; Magnusson, K.Aa.

Four studies concerning geophysical investigations and TV inspection in boreholes in connection with KBS studies at Finnsjoe, Karlshamn, Kraakemaala and Stripa and PRAV's studies at Studsvik have been evaluated. This has led to proposals concerning the choice of instruments and methods for future studies and a review of future work required. The evaluation has shown that the following borehole measurements are of primary interest in the continued work: Determinations of temperature and resistivity of the borehole liquid, resistance and resistivity measurements, SP, Sonic, Caliper and VLF. TV inspection, IP and gamma-gamma should also be included in the arsenal of available test methods.(author)

Contextual factors in maternal and newborn health evaluation: a protocol applied in Nigeria, India and Ethiopia.

Science.gov (United States)

Sabot, Kate; Marchant, Tanya; Spicer, Neil; Berhanu, Della; Gautham, Meenakshi; Umar, Nasir; Schellenberg, Joanna

2018-01-01

Understanding the context of a health programme is important in interpreting evaluation findings and in considering the external validity for other settings. Public health researchers can be imprecise and inconsistent in their usage of the word "context" and its application to their work. This paper presents an approach to defining context, to capturing relevant contextual information and to using such information to help interpret findings from the perspective of a research group evaluating the effect of diverse innovations on coverage of evidence-based, life-saving interventions for maternal and newborn health in Ethiopia, Nigeria, and India. We define "context" as the background environment or setting of any program, and "contextual factors" as those elements of context that could affect implementation of a programme. Through a structured, consultative process, contextual factors were identified while trying to strike a balance between comprehensiveness and feasibility. Thematic areas included demographics and socio-economics, epidemiological profile, health systems and service uptake, infrastructure, education, environment, politics, policy and governance. We outline an approach for capturing and using contextual factors while maximizing use of existing data. Methods include desk reviews, secondary data extraction and key informant interviews. Outputs include databases of contextual factors and summaries of existing maternal and newborn health policies and their implementation. Use of contextual data will be qualitative in nature and may assist in interpreting findings in both quantitative and qualitative aspects of programme evaluation. Applying this approach was more resource intensive than expected, in part because routinely available information was not consistently available across settings and more primary data collection was required than anticipated. Data was used only minimally, partly due to a lack of evaluation results that needed further explanation

Evaluation of the use of fresh water by four Egyptian farms applying integrated aquaculture – agriculture

NARCIS (Netherlands)

Heijden, van der P.G.M.; Nasr-Alla, A.; Kenawy, D.; El-Naggar, G.; Beveridge, M.

2012-01-01

This report describes a study done in 2010 by researchers of the WorldFish Center on water use in Egyptian farms that apply aquaculture – agriculture integration. Two of the four farms that were monitored derived the main income from farming and selling fish, the two other farms were mainly

A Learning Evaluation for an Immersive Virtual Laboratory for Technical Training Applied into a Welding Workshop

Science.gov (United States)

Torres, Francisco; Neira Tovar, Leticia A.; del Rio, Marta Sylvia

2017-01-01

This study aims to explore the results of welding virtual training performance, designed using a learning model based on cognitive and usability techniques, applying an immersive concept focused on person attention. Moreover, it also intended to demonstrate that exits a moderating effect of performance improvement when the user experience is taken…

Evaluating the Impact of the U.S. National Toxicology Program: A Case Study on Hexavalent Chromium.

Science.gov (United States)

Xie, Yun; Holmgren, Stephanie; Andrews, Danica M K; Wolfe, Mary S

2017-02-01

Evaluating the impact of federally funded research with a broad, methodical, and objective approach is important to ensure that public funds advance the mission of federal agencies. We aimed to develop a methodical approach that would yield a broad assessment of National Toxicology Program's (NTP's) effectiveness across multiple sectors and demonstrate the utility of the approach through a case study. A conceptual model was developed with defined activities, outputs (products), and outcomes (proximal, intermediate, distal) and applied retrospectively to NTP's research on hexavalent chromium (CrVI). Proximal outcomes were measured by counting views of and requests for NTP's products by external stakeholders. Intermediate outcomes were measured by bibliometric analysis. Distal outcomes were assessed through Web and LexisNexis searches for documents related to legislation or regulation changes. The approach identified awareness of NTP's work on CrVI by external stakeholders (proximal outcome) and citations of NTP's research in scientific publications, reports, congressional testimonies, and legal and policy documents (intermediate outcome). NTP's research was key to the nation's first-ever drinking water standard for CrVI adopted by California in 2014 (distal outcome). By applying this approach to a case study, the utility and limitations of the approach were identified, including challenges to evaluating the outcomes of a research program. This study identified a broad and objective approach for assessing NTP's effectiveness, including methodological needs for more thorough and efficient impact assessments in the future. Citation: Xie Y, Holmgren S, Andrews DMK, Wolfe MS. 2017. Evaluating the impact of the U.S. National Toxicology Program: a case study on hexavalent chromium. Environ Health Perspect 125:181-188; http://dx.doi.org/10.1289/EHP21.

Identification of the Competencies Needed to Apply Social Marketing to Extension Programming: Results of a Delphi Study

Science.gov (United States)

Warner, Laura A.; Stubbs, Eric; Murphrey, Theresa Pesl; Huynh, Phuong

2016-01-01

The purpose of this study was to identify the specific competencies needed to apply social marketing, a promising approach to behavior change, to Extension programming. A modified Delphi study was used to achieve group consensus among a panel of experts on the skills, characteristics, and knowledge needed to successfully apply this behavior change…

Focusing studies of an applied Br extraction diode on the LION accelerator

International Nuclear Information System (INIS)

Struckman, C.K.; Kusse, B.R.; Rondeau, G.

1990-01-01

The LION Accelerator, 1.5 MV, 4 Ω, is being used to study the characteristics of an applied B r extraction diode. The diode utilizes both an inner and outer cathode and has been observed to operate at high ion current efficiencies compared to previous extraction diodes. Typical efficiencies were measured to be ∼80% which compares very favorably with the efficiencies seen in applied B z diodes. In this paper, the authors report the results of a series of experiments examining the role of the inner cathode in electron loss and ion emission. In addition, operation with an argon gas cell is reported. The ion beam appears to be space-charge neutralized by the gas cell foil alone, and current neutralized when the gas cell pressure is above 100 mT

Applying Universal Instructional Design to Course Websites by Using Course Evaluations

Science.gov (United States)

Carter, Irene; Leslie, Donald; Kwan, Denise

2012-01-01

The authors explore their use of learner-centred teaching strategies and Universal Instructional Design (UID) on course websites. UID is based on universal design, the design of products and environments intended to be usable by all people to the greatest extent possible (Burgstahler & Cory, 2008). UID applies universal design to instructional…

The case for applying an early-lifecycle technology evaluation methodology to comparative evaluation of requirements engineering research

Science.gov (United States)

Feather, Martin S.

2003-01-01

The premise of this paper is taht there is a useful analogy between evaluation of proposed problem solutions and evaluation of requirements engineering research itself. Both of these application areas face the challenges of evaluation early in the lifecycle, of the need to consider a wide variety of factors, and of the need to combine inputs from multiple stakeholders in making thse evaluation and subsequent decisions.

Modern psychometrics applied in rheumatology--a systematic review.

Science.gov (United States)

Siemons, Liseth; Ten Klooster, Peter M; Taal, Erik; Glas, Cees Aw; Van de Laar, Mart Afj

2012-10-31

Although item response theory (IRT) appears to be increasingly used within health care research in general, a comprehensive overview of the frequency and characteristics of IRT analyses within the rheumatic field is lacking. An overview of the use and application of IRT in rheumatology to date may give insight into future research directions and highlight new possibilities for the improvement of outcome assessment in rheumatic conditions. Therefore, this study systematically reviewed the application of IRT to patient-reported and clinical outcome measures in rheumatology. Literature searches in PubMed, Scopus and Web of Science resulted in 99 original English-language articles which used some form of IRT-based analysis of patient-reported or clinical outcome data in patients with a rheumatic condition. Both general study information and IRT-specific information were assessed. Most studies used Rasch modeling for developing or evaluating new or existing patient-reported outcomes in rheumatoid arthritis or osteoarthritis patients. Outcomes of principle interest were physical functioning and quality of life. Since the last decade, IRT has also been applied to clinical measures more frequently. IRT was mostly used for evaluating model fit, unidimensionality and differential item functioning, the distribution of items and persons along the underlying scale, and reliability. Less frequently used IRT applications were the evaluation of local independence, the threshold ordering of items, and the measurement precision along the scale. IRT applications have markedly increased within rheumatology over the past decades. To date, IRT has primarily been applied to patient-reported outcomes, however, applications to clinical measures are gaining interest. Useful IRT applications not yet widely used within rheumatology include the cross-calibration of instrument scores and the development of computerized adaptive tests which may reduce the measurement burden for both the patient

A Study on Evaluation of Living Environment by Students' Preferences in Residences

OpenAIRE

鶴崎, 直樹; 坂井, 猛; 上野, 武; 有馬, 隆文; Tsurusaki, Naoki; Sakai, Takeru; Ueno, Takeshi; Arima, Takafumi

2006-01-01

The purpose of this paper was to construct a living quarters environment evaluation method by surveying students' preferences in residences and to apply the evaluation method to the Kyushu University Hakozaki campus so as to inspect the method's efficacy and applicability to a new campus. The obtained results included: 1)information about preferences in residence selection by students attending Kyushu University. 2)proof of efficacy from the viewpoint of students in the Kyushu University Hako...

Tracking Preservice Kindergarten Teachers' Development of Singing Skills and Confidence: An Applied Study

Science.gov (United States)

Neokleous, Rania

2010-01-01

The purpose of this study was to (a) examine the effects of a music methods course on the singing skills of preservice kindergarten teachers, (b) document the nature and development of their skills during the course, and (c) trace any changes in their confidence levels toward singing as a result of the course. As an applied study which was carried…

What and How Are We Evaluating? Meta-Evaluation Study of the NASA Innovations in Climate Education (NICE) Portfolio

Science.gov (United States)

Martin, A. M.; Barnes, M. H.; Chambers, L. H.; Pippin, M. R.

2013-12-01

As part of NASA's Minority University Research and Education Program (MUREP), the NASA Innovations in Climate Education (NICE) project at Langley Research Center has funded 71 climate education initiatives since 2008. The funded initiatives span across the nation and contribute to the development of a climate-literate public and the preparation of a climate-related STEM workforce through research experiences, professional development opportunities, development of data access and modeling tools, and educational opportunities in both K-12 and higher education. Each of the funded projects proposes and carries out its own evaluation plan, in collaboration with external or internal evaluation experts. Using this portfolio as an exemplar case, NICE has undertaken a systematic meta-evaluation of these plans, focused primarily on evaluation questions, approaches, and methods. This meta-evaluation study seeks to understand the range of evaluations represented in the NICE portfolio, including descriptive information (what evaluations, questions, designs, approaches, and methods are applied?) and questions of value (do these evaluations meet the needs of projects and their staff, and of NASA/NICE?). In the current climate, as federal funders of climate change and STEM education projects seek to better understand and incorporate evaluation into their decisions, evaluators and project leaders are also seeking to build robust understanding of program effectiveness. Meta-evaluations like this provide some baseline understanding of the current status quo and the kinds of evaluations carried out within such funding portfolios. These explorations are needed to understand the common ground between evaluative best practices, limited resources, and agencies' desires, capacity, and requirements. When NASA asks for evaluation of funded projects, what happens? Which questions are asked and answered, using which tools? To what extent do the evaluations meet the needs of projects and

IRECCSEM: Evaluating Clare Basin potential for onshore carbon sequestration using magnetotelluric data (Preliminary results). New approaches applied for processing, modeling and interpretation

Science.gov (United States)

Campanya i Llovet, J.; Ogaya, X.; Jones, A. G.; Rath, V.

2014-12-01

The IRECCSEM project (www.ireccsem.ie) is a Science Foundation Ireland Investigator Project that is funded to evaluate Ireland's potential for onshore carbon sequestration in saline aquifers by integrating new electromagnetic data with existing geophysical and geological data. The main goals of the project are to determine porosity-permeability values of the potential reservoir formation as well as to evaluate the integrity of the seal formation. During the Summer of 2014 a magnetotelluric (MT) survey was carried out at the Clare basin (Ireland). A total of 140 sites were acquired including audiomagnetotelluric (AMT), broadband magnetotelluric (BBMT) and long period magnetotelluric (LMT) data. The nominal space between sites is 0.6 km for AMT sites, 1.2 km for BBMT sites and 8 km for LMT sites. To evaluate the potential for carbon sequestration of the Clare basin three advances on geophysical methodology related to electromagnetic techniques were applied. First of all, processing of the MT data was improved following the recently published ELICIT methodology. Secondly, during the inversion process, the electrical resistivity distribution of the subsurface was constrained combining three different tensor relationships: Impedances (Z), induction arrows (TIP) and multi-site horizontal magnetic transfer-functions (HMT). Results from synthetic models were used to evaluate the sensitivity and properties of each tensor relationship. Finally, a computer code was developed, which employs a stabilized least squares approach to estimate the cementation exponent in the generalized Archie law formulated by Glover (2010). This allows relating MT-derived electrical resistivity models to porosity distributions. The final aim of this procedure is to generalize the porosity - permeability values measured in the boreholes to regional scales. This methodology will contribute to the evaluation of possible sequestration targets in the study area.

The improvement of environmental performances by applying ISO 14001 standard: A case study

Directory of Open Access Journals (Sweden)

Živković Snežana

2013-01-01

Full Text Available This paper presents the analysis of the advantages of applying ISO 14001 system in an environmental protection management system. The environmental protection management system which is not licensed, i.e., compatible with the principles and standard pre-conditions considerably increases the plausibility for ecological risk. There are some issues that remain to be solved in the areas which are not expressed by financial values only but also have a non-financial character with the aim of expanding markets, company image improvement and improvement of the environmental performance indicators. By improving a company’s environmental management system efficiency we expect to achieve the minimization and elimination of damaging influences on the environment which are the consequence of company’s activities. A case study in the Oil Refinery Belgrade (RNB analyses the implementation of the standard ISO 14001:2004 into its environment protection management system, particularly emphasizing the company’s own way of evaluating the environment aspects with the aim of establishing results of ecological performances indicators improvement. The average values of the first ecological indicator of the plant, the total amount of the waste waters in m3 per a ton of product, clearly show the downturn trend, which is confirmed by the proportional reduction of the second ecological plant indicator, that is by the flocculants consumption (Al2(SO43, Na2CO3 in kg per m3 of the waste water of the Oil Refinery of Belgrade for the given period 2008-2010. Case study RNB confirms the improvement of environmental performances using the ISO 14001 standard.

Construction and applied research of low-carbon building evaluation index system

Science.gov (United States)

Liu, Zhongwen; Dong, Xiaohong; Gao, Pengzhao

2017-04-01

Energy conservation in building is a key link on alleviating energy-deficient contradiction, improving the quality of human life environment, and realizing sustainable development in our country. In this paper, we construct low-carbon building evaluation index system and evaluation method from five aspects—low-carbon structure, low-carbon materials, low-carbon energy, low-carbon technology and low-carbon management. Finally, taking “Solar Valley” in Dezhou as an example, we make the evaluation to its situation of low-carbon building.

Women's Studies Collections: A Checklist Evaluation

Science.gov (United States)

Bolton, Brooke A.

2009-01-01

A checklist evaluation on thirty-seven Women's Studies programs conducted using the individual institutions' online public access catalogs (OPACs) is presented. Although Women's Studies collections are very difficult to build, an evaluation of existing programs shows that collections, for the most part, have managed substantial coverage of the…

An Experimental Study of Swirling Flows as Applied to Annular Combustors

Science.gov (United States)

Seal, Michael Damian, II

1997-01-01

This thesis presents an experimental study of swirling flows with direct applications to gas turbine combustors. Two separate flowfields were investigated: a round, swirling jet and a non-combusting annular combustor model. These studies were intended to allow both a further understanding of the behavior of general swirling flow characteristics, such as the recirculation zone, as well as to provide a base for the development of computational models. In order to determine the characteristics of swirling flows the concentration fields of a round, swirling jet were analyzed for varying amount of swirl. The experimental method used was a light scattering concentration measurement technique known as marker nephelometry. Results indicated the formation of a zone of recirculating fluid for swirl ratios (rotational speed x jet radius over mass average axial velocity) above a certain critical value. The size of this recirculation zone, as well as the spread angle of the jet, was found to increase with increase in the amount of applied swirl. The annular combustor model flowfield simulated the cold-flow characteristics of typical current annular combustors: swirl, recirculation, primary air cross jets and high levels of turbulence. The measurements in the combustor model made by the Laser Doppler Velocimetry technique, allowed the evaluation of the mean and rms velocities in the three coordinate directions, one Reynold's shear stress component and the turbulence kinetic energy: The primary cross jets were found to have a very strong effect on both the mean and turbulence flowfields. These cross jets, along with a large step change in area and wall jet inlet flow pattern, reduced the overall swirl in the test section to negligible levels. The formation of the strong recirculation zone is due mainly to the cross jets and the large step change in area. The cross jets were also found to drive a four-celled vortex-type motion (parallel to the combustor longitudinal axis) near the

Building capacity for water, sanitation, and hygiene programming: Training evaluation theory applied to CLTS management training in Kenya.

Science.gov (United States)

Crocker, Jonny; Shields, Katherine F; Venkataramanan, Vidya; Saywell, Darren; Bartram, Jamie

2016-10-01

Training and capacity building are long established critical components of global water, sanitation, and hygiene (WaSH) policies, strategies, and programs. Expanding capacity building support for WaSH in developing countries is one of the targets of the Sustainable Development Goals. There are many training evaluation methods and tools available. However, training evaluations in WaSH have been infrequent, have often not utilized these methods and tools, and have lacked rigor. We developed a conceptual framework for evaluating training in WaSH by reviewing and adapting concepts from literature. Our framework includes three target outcomes: learning, individual performance, and improved programming; and two sets of influences: trainee and context factors. We applied the framework to evaluate a seven-month community-led total sanitation (CLTS) management training program delivered to 42 government officials in Kenya from September 2013 to May 2014. Trainees were given a pre-training questionnaire and were interviewed at two weeks and seven months after initial training. We qualitatively analyzed the data using our conceptual framework. The training program resulted in trainees learning the CLTS process and new skills, and improving their individual performance through application of advocacy, partnership, and supervision soft skills. The link from trainees' performance to improved programming was constrained by resource limitations and pre-existing rigidity of trainees' organizations. Training-over-time enhanced outcomes and enabled trainees to overcome constraints in their work. Training in soft skills is relevant to managing public health programs beyond WaSH. We make recommendations on how training programs can be targeted and adapted to improve outcomes. Our conceptual framework can be used as a tool both for planning and evaluating training programs in WaSH. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Performance Values for Non-Destructive Assay (NDA) Technique Applied to Wastes: Evaluation by the ESARDA NDA Working Group

International Nuclear Information System (INIS)

Rackham, Jamie; Weber, Anne-Laure; Chard, Patrick

2012-01-01

The first evaluation of NDA performance values was undertaken by the ESARDA Working Group for Standards and Non Destructive Assay Techniques and was published in 1993. Almost ten years later in 2002 the Working Group reviewed those values and reported on improvements in performance values and new measurement techniques that had emerged since the original assessment. The 2002 evaluation of NDA performance values did not include waste measurements (although these had been incorporated into the 1993 exercise), because although the same measurement techniques are generally applied, the performance is significantly different compared to the assay of conventional Safeguarded special nuclear material. It was therefore considered more appropriate to perform a separate evaluation of performance values for waste assay. Waste assay is becoming increasingly important within the Safeguards community, particularly since the implementation of the Additional Protocol, which calls for declaration of plutonium and HEU bearing waste in addition to information on existing declared material or facilities. Improvements in the measurement performance in recent years, in particular the accuracy, mean that special nuclear materials can now be accounted for in wastes with greater certainty. This paper presents an evaluation of performance values for the NDA techniques in common usage for the assay of waste containing special nuclear material. The main topics covered by the document are: 1- Techniques for plutonium bearing solid wastes 2- Techniques for uranium bearing solid wastes 3 - Techniques for assay of fissile material in spent fuel wastes. Originally it was intended to include performance values for measurements of uranium and plutonium in liquid wastes; however, as no performance data for liquid waste measurements was obtained it was decided to exclude liquid wastes from this report. This issue of the performance values for waste assay has been evaluated and discussed by the ESARDA

Performance Values for Non-Destructive Assay (NDA) Technique Applied to Wastes: Evaluation by the ESARDA NDA Working Group

Energy Technology Data Exchange (ETDEWEB)

Rackham, Jamie [Babcock International Group, Sellafield, Seascale, Cumbria, (United Kingdom); Weber, Anne-Laure [Institut de Radioprotection et de Surete Nucleaire Fontenay-Aux-Roses (France); Chard, Patrick [Canberra, Forss Business and Technology park, Thurso, Caithness (United Kingdom)

2012-12-15

The first evaluation of NDA performance values was undertaken by the ESARDA Working Group for Standards and Non Destructive Assay Techniques and was published in 1993. Almost ten years later in 2002 the Working Group reviewed those values and reported on improvements in performance values and new measurement techniques that had emerged since the original assessment. The 2002 evaluation of NDA performance values did not include waste measurements (although these had been incorporated into the 1993 exercise), because although the same measurement techniques are generally applied, the performance is significantly different compared to the assay of conventional Safeguarded special nuclear material. It was therefore considered more appropriate to perform a separate evaluation of performance values for waste assay. Waste assay is becoming increasingly important within the Safeguards community, particularly since the implementation of the Additional Protocol, which calls for declaration of plutonium and HEU bearing waste in addition to information on existing declared material or facilities. Improvements in the measurement performance in recent years, in particular the accuracy, mean that special nuclear materials can now be accounted for in wastes with greater certainty. This paper presents an evaluation of performance values for the NDA techniques in common usage for the assay of waste containing special nuclear material. The main topics covered by the document are: 1- Techniques for plutonium bearing solid wastes 2- Techniques for uranium bearing solid wastes 3 - Techniques for assay of fissile material in spent fuel wastes. Originally it was intended to include performance values for measurements of uranium and plutonium in liquid wastes; however, as no performance data for liquid waste measurements was obtained it was decided to exclude liquid wastes from this report. This issue of the performance values for waste assay has been evaluated and discussed by the ESARDA

Probabilistic fracture mechanics applied for lbb case study: international benchmark

International Nuclear Information System (INIS)

Radu, V.

2015-01-01

An application of probabilistic fracture mechanics to evaluate the structural integrity for a case study chosen from experimental Mock-ups of FP7 STYLE project is described. The reliability model for probabilistic structural integrity, focused on the assessment of TWC in the pipe weld under complex loading (bending moment and residual stress) has been setup. The basic model is the model of fracture for through-wall cracked pipe under elastic-plastic conditions. The corresponding structural reliability approach is developed with the probabilities of failure associated with maximum load for crack initiation, net-section collapse but also the evaluation the instability loads. The probabilities of failure for a through-wall crack in a pipe subject to pure bending are evaluated by using crude Monte Carlo simulations. The results from the international benchmark are presented for the mentioned case in the context of ageing and lifetime management of pressure boundary/pressure circuit component. (authors)

Study on team evaluation. Team process model for team evaluation

International Nuclear Information System (INIS)

Sasou Kunihide; Ebisu, Mitsuhiro; Hirose, Ayako

2004-01-01

Several studies have been done to evaluate or improve team performance in nuclear and aviation industries. Crew resource management is the typical example. In addition, team evaluation recently gathers interests in other teams of lawyers, medical staff, accountants, psychiatrics, executive, etc. However, the most evaluation methods focus on the results of team behavior that can be observed through training or actual business situations. What is expected team is not only resolving problems but also training younger members being destined to lead the next generation. Therefore, the authors set the final goal of this study establishing a series of methods to evaluate and improve teams inclusively such as decision making, motivation, staffing, etc. As the first step, this study develops team process model describing viewpoints for the evaluation. The team process is defined as some kinds of power that activate or inactivate competency of individuals that is the components of team's competency. To find the team process, the authors discussed the merits of team behavior with the experienced training instructors and shift supervisors of nuclear/thermal power plants. The discussion finds four team merits and many components to realize those team merits. Classifying those components into eight groups of team processes such as 'Orientation', 'Decision Making', 'Power and Responsibility', 'Workload Management', 'Professional Trust', 'Motivation', 'Training' and 'staffing', the authors propose Team Process Model with two to four sub processes in each team process. In the future, the authors will develop methods to evaluate some of the team processes for nuclear/thermal power plant operation teams. (author)

Symbolic Interaction and Applied Social Research: A FOCUS ON TRANSLATIONAL SCIENCE RESEARCH1.

Science.gov (United States)

Kotarba, Joseph A

2014-08-01

In symbolic interaction, a traditional yet unfortunate and unnecessary distinction has been made between basic and applied research. The argument has been made that basic research is intended to generate new knowledge, whereas applied research is intended to apply knowledge to the solution of practical (social and organizational) problems. I will argue that the distinction between basic and applied research in symbolic interaction is outdated and dysfunctional. The masters of symbolic interactionist thought have left us a proud legacy of shaping their scholarly thinking and inquiry in response to and in light of practical issues of the day (e.g., Znaniecki, and Blumer). Current interactionist work continues this tradition in topical areas such as social justice studies. Applied research, especially in term of evaluation and needs assessment studies, can be designed to serve both basic and applied goals. Symbolic interaction provides three great resources to do this. The first is its orientation to dynamic sensitizing concepts that direct research and ask questions instead of supplying a priori and often impractical answers. The second is its orientation to qualitative methods, and appreciation for the logic of grounded theory. The third is interactionism's overall holistic approach to interfacing with the everyday life world. The primary illustrative case here is the qualitative component of the evaluation of an NIH-funded, translational medical research program. The qualitative component has provided interactionist-inspired insights into translational research, such as examining cultural change in medical research in terms of changes in the form and content of formal and informal discourse among scientists; delineating the impact of significant symbols such as "my lab" on the social organization of science; and appreciating the essence of the self-concept "scientist" on the increasingly bureaucratic and administrative identities of medical researchers. This

Evaluating a physician leadership development program - a mixed methods approach.

Science.gov (United States)

Throgmorton, Cheryl; Mitchell, Trey; Morley, Tom; Snyder, Marijo

2016-05-16

Purpose - With the extent of change in healthcare today, organizations need strong physician leaders. To compensate for the lack of physician leadership education, many organizations are sending physicians to external leadership programs or developing in-house leadership programs targeted specifically to physicians. The purpose of this paper is to outline the evaluation strategy and outcomes of the inaugural year of a Physician Leadership Academy (PLA) developed and implemented at a Michigan-based regional healthcare system. Design/methodology/approach - The authors applied the theoretical framework of Kirkpatrick's four levels of evaluation and used surveys, observations, activity tracking, and interviews to evaluate the program outcomes. The authors applied grounded theory techniques to the interview data. Findings - The program met targeted outcomes across all four levels of evaluation. Interview themes focused on the significance of increasing self-awareness, building relationships, applying new skills, and building confidence. Research limitations/implications - While only one example, this study illustrates the importance of developing the evaluation strategy as part of the program design. Qualitative research methods, often lacking from learning evaluation design, uncover rich themes of impact. The study supports how a PLA program can enhance physician learning, engagement, and relationship building throughout and after the program. Physician leaders' partnership with organization development and learning professionals yield results with impact to individuals, groups, and the organization. Originality/value - Few studies provide an in-depth review of evaluation methods and outcomes of physician leadership development programs. Healthcare organizations seeking to develop similar in-house programs may benefit applying the evaluation strategy outlined in this study.

NMR spectroscopy applied to the eye: Drugs and metabolic studies

Energy Technology Data Exchange (ETDEWEB)

Saether, Oddbjoern

2005-07-01

NMR spectroscopy has been extensively applied in biomedical research during the last decades. It has proved to be an analytical tool of great value. From being mainly used in chemistry, technological developments have expanded the application of NMR spectroscopy to a great wealth of disciplines. With this method, biochemical information can be obtained by analysing tissue extracts. Moreover, NMR spectroscopy is increasingly employed for pharmacokinetic studies and analysis of biofluids. Technological progress has provided increased sensitivity and resolution in the spectra, which enable even more of the complexity of biological samples to be elucidated. With the implementation of high-resolution magic angle spinning (HR-MAS) NMR spectroscopy in biomedicine, intact tissue samples or biopsies can be investigated. Thus, NMR spectroscopy has an ever-increasing impact in metabolic screening of human samples and in animal models, and methods are also increasingly realised in vivo. The present work, NMR spectroscopy applied to eye research, consists of two main parts. Firstly, the feasibility to monitor fluorinated ophthalmic drugs directly in the eye was assessed. Secondly, HR-MAS H1 NMR spectroscopy was applied for metabolic profiling of the anterior eye segment, specifically to analyse metabolic changes in intact corneal and lenticular samples after cataractogenic insults. This work included metabonomics with the application of pattern recognition methods to analyse HR-MAS spectra of eye tissues. Optimisation strategies were explored for F19 NMR detection of fluorinated drugs in a phantom eye. S/N gains in F19 NMR spectroscopy were achieved by implementing time-share H1 decoupling at 2.35 T. The method is advantageous for compounds displaying broad spectral coupling patterns, though detection of drugs at concentrations encountered in the anterior eye segment after topical application was not feasible. Higher magnetic fields and technological improvements could enable

NMR spectroscopy applied to the eye: Drugs and metabolic studies

International Nuclear Information System (INIS)

Saether, Oddbjoern

2005-01-01

NMR spectroscopy has been extensively applied in biomedical research during the last decades. It has proved to be an analytical tool of great value. From being mainly used in chemistry, technological developments have expanded the application of NMR spectroscopy to a great wealth of disciplines. With this method, biochemical information can be obtained by analysing tissue extracts. Moreover, NMR spectroscopy is increasingly employed for pharmacokinetic studies and analysis of biofluids. Technological progress has provided increased sensitivity and resolution in the spectra, which enable even more of the complexity of biological samples to be elucidated. With the implementation of high-resolution magic angle spinning (HR-MAS) NMR spectroscopy in biomedicine, intact tissue samples or biopsies can be investigated. Thus, NMR spectroscopy has an ever-increasing impact in metabolic screening of human samples and in animal models, and methods are also increasingly realised in vivo. The present work, NMR spectroscopy applied to eye research, consists of two main parts. Firstly, the feasibility to monitor fluorinated ophthalmic drugs directly in the eye was assessed. Secondly, HR-MAS H1 NMR spectroscopy was applied for metabolic profiling of the anterior eye segment, specifically to analyse metabolic changes in intact corneal and lenticular samples after cataractogenic insults. This work included metabonomics with the application of pattern recognition methods to analyse HR-MAS spectra of eye tissues. Optimisation strategies were explored for F19 NMR detection of fluorinated drugs in a phantom eye. S/N gains in F19 NMR spectroscopy were achieved by implementing time-share H1 decoupling at 2.35 T. The method is advantageous for compounds displaying broad spectral coupling patterns, though detection of drugs at concentrations encountered in the anterior eye segment after topical application was not feasible. Higher magnetic fields and technological improvements could enable

[Digital learning object for diagnostic reasoning in nursing applied to the integumentary system].

Science.gov (United States)

da Costa, Cecília Passos Vaz; Luz, Maria Helena Barros Araújo

2015-12-01

To describe the creation of a digital learning object for diagnostic reasoning in nursing applied to the integumentary system at a public university of Piaui. A methodological study applied to technological production based on the pedagogical framework of problem-based learning. The methodology for creating the learning object observed the stages of analysis, design, development, implementation and evaluation recommended for contextualized instructional design. The revised taxonomy of Bloom was used to list the educational goals. The four modules of the developed learning object were inserted into the educational platform Moodle. The theoretical assumptions allowed the design of an important online resource that promotes effective learning in the scope of nursing education. This study should add value to nursing teaching practices through the use of digital learning objects for teaching diagnostic reasoning applied to skin and skin appendages.

Applying core principles to the design and evaluation of the 'Take Charge. Take the Test' campaign: what worked and lessons learned.

Science.gov (United States)

Fraze, J L; Uhrig, J D; Davis, K C; Taylor, M K; Lee, N R; Spoeth, S; Robinson, A; Smith, K; Johnston, J; McElroy, L

2009-09-01

To describe the application of seven core principles to the design and evaluation of a human immunodeficiency virus (HIV) testing social marketing campaign as a case study example. The Centers for Disease Control and Prevention (CDC) used a structured social marketing approach, informed by the Ecological Model, the Theory of Planned Behaviour and the Health Belief Model, to develop and evaluate a two-city campaign with print, radio and outdoor advertising; HIV telephone hotlines; an HIV website; community partnerships; and events to promote information seeking and HIV testing. The CDC applied seven core principles to design and evaluate the campaign, including formative research, the use of behavioural theories, audience segmentation, message design and pretesting, channel selection, process evaluation and outcome evaluation. Over 200 partners in both cities contributed significantly to campaign efforts. Key informant interviews indicated that, due to increased coordination, city infrastructures for HIV testing improved. More than 9600 individuals attended campaign events in both cities, with 1492 rapid HIV tests administered and 14 newly-identified HIV individuals. Overall, event attendees responded positively to campaign materials and events, and free HIV testing opportunities. The campaign significantly increased information-seeking behaviours in the form of hotline calls and web searches. Audience reaction and receptivity to the final campaign materials was very high. Exposure to campaign messages was associated with increases in key knowledge items, intentions to get tested, and peer-to-peer communication. The seven core principles, including formative research, behavioural theories and extensive partnerships, acted synergistically to help a campaign reach its target audience with compelling, relevant messages and motivate them to seek information and get an HIV test. Rapid testing removes many barriers by providing a testing process that can be accessed and

Beliefs of Applied Studio Faculty on Desirable Traits of Prospective Music Education Majors: A Pilot Study

Science.gov (United States)

Royston, Natalie Steele; Springer, D. Gregory

2015-01-01

The purpose of this pilot study was to examine the beliefs of applied music faculty on desirable traits of prospective music education majors. Researcher-designed surveys were sent electronically to applied music faculty at 12 National Association of Schools of Music-accredited institutions randomly selected from each of the four major divisions…

Global Business Literacy in the Classroom: Developing and Applying an Assessment Framework

Science.gov (United States)

Arevalo, Jorge A.; McCrea, Elizabeth; Yin, Jason Z.

2012-01-01

This study develops and applies a framework to evaluate undergraduate Global Business Literacy (GBL) learning outcomes, which is defined here as the ability to adapt and function in the global business context and to be knowledgeable about its core issues and trends. As a first step in a multi-stage research process, we used extant expatriate and…

Study of applying a hybrid standalone wind-photovoltaic generation system

Directory of Open Access Journals (Sweden)

Aissa Dahmani

2015-01-01

Full Text Available The purpose of this paper is the study of applying a hybrid system wind/photovoltaic to supply a community in southern Algeria. Diesel generators are always used to provide such remote regions with energy. Using renewable energy resources is a good alternative to overcome such pollutant generators. Hybrid Optimization Model for Electric Renewable (HOMER software is used to determine the economic feasibility of the proposed configuration. Assessment of renewable resources consisting in wind and solar potentials, load profile determination and sensitivity of different parameters analysis were performed. The cost of energy (COE of 0.226 $/kWh is very competitive with those found in literature.

Colorimetry applied to the field of cultural heritage: examples of study cases

Directory of Open Access Journals (Sweden)

Salvatore Lorusso

2007-07-01

Full Text Available For a few years now, the Dipartimento di Storie e Metodi per la Conservazione dei Beni Culturali of the Alma Mater Studiorum Università di Bologna (sede di Ravenna has been creating a Diagnostic Laboratory for the study on the “system: cultural heritage/conservation environment”. In the present paper the results of different surveys concerning the use of colorimetry on different typologies of art works are reported: graphic documents (fig. 1; oil painting on board and canvas (fig. 2; wall painting (fig. 3; stony materials consolidated with ethyl silicate (fig. 4. Measurements of the chromatic parameters, according to the CIE L*a*b* chromaticity diagram and to the UNI 8941 Standard Coloured surfaces, were carried out with the spectrophotometric colorimeter Minolta CM-2600D model. The reference measurements (targets were carried out on every typology of works. Such targets, recorded on the tool or in the computer, could be considered in order to draw a comparison in time on the same studied surface. It is then possible to check the trend of the chromatic alteration as an effect of interaction of the environment of location-conservation with the art work and, then to determine the causes, i.e the environmental operating-factors. The measurements of the chromatic parameters for graphic documents and for wall paintings have also allowed us to establish if the modifications, caused by an inappropriate environment, must be linked to irreversible or reversible effects and, then, with the possibility of being removed. As regards wall paintings, the respect of the “noble patina” was showed, as established by the Card of Restoration, by means of the measurement of the + b* parameters (yellow degree. The studies on stony materials aimed at the evaluation of the chromatic alterations of the art works previously consolidated with various products based on ethyl silicates: different results were reached according to the different degree of stone

The Degree of Applying E-Learning in English Departments at Al-Balqa Applied University from Instructors' Perspectives

Science.gov (United States)

Alzu'bi, Mohammad Akram Mohammad

2018-01-01

The study aimed at identifying the degree of applying e-learning in Al-Balqa Applied University from instructors' perspectives so the researcher designed a questionnaire of 20 items which is applied on a sample of 48 lecturers. The study showed that the percentage of (64.0%) out of 48 participants apply e-learning in English departments at…

Uptake of seed-applied copper by maize and the effects on seed vigor

Directory of Open Access Journals (Sweden)

Marcos Altomani Neves Dias

2015-01-01

Full Text Available Seed treatment is a low-cost and efficacious method to deliver a diversity of compounds to field crops. This study evaluated the uptake of seed-applied Cu by maize and the effect on seed vigor. The treatments were composed of a control (untreated seeds and five dosages of Cu: 0.11, 0.22, 0.44, 0.88 and 1.76 mg Cu seed–1, applied as cuprous oxide and copper oxychloride formulations. Seedling emergence and the speed of seedling emergence were determined in three periods: 1, 60 and 120 days after Cu application. Evaluations of root and shoot dry mass, Cu tissue concentration and efficiencies of Cu uptake and incorporation were conducted with two-leaf stage maize plants. Seed-applied Cu reduces the speed of maize seedling emergence, while the final emergence percentage is not affected. Shoot dry mass tends to increase with the application of Cu, while there is no interference on root dry mass within the dosages tested. Cu tissue concentration of both roots and shoots increases as higher dosages of Cu are applied to seeds, with higher accumulation in roots. Cuprous oxide promotes higher uptake of Cu by maize roots compared to copper oxychloride.

Evaluation of brain tissue applying equivalent cross-relaxation rate using MRI

International Nuclear Information System (INIS)

Obata, Hideaki; Inaba, Tadashi; Tokuda, Masataka; Matsushima, Shigeru; Kinosada, Yasutomi

2003-01-01

The equivalent cross-relaxation rate (ECR) is a measurement method that can evaluate a change in organization structure quantitatively utilizing MRI. The goal of this study is to discover a parameter that we can use to evaluate aging of the human brain using ECR. Fourteen patients diagnosed with diseases other than those located in the cranium were imaged using a SIGNA model of GE Medical Systems equipped with a 1.5 T clinical scanner. The ECR values were defined as the percentage of signal loss between unsaturated and saturated images. It was found that the ECR value of gray matter was lower than subcortical white matter. At ages under 70 years old, the mean of ECR values of subcortical white matter showed stable values with insignificant variance. Furthermore, there was no correlation between age and ECR value of every region calculated. On the other hand, it was found that there was a negative correlation for the ECR values of subcortical white matter and gray matter at ages slightly over 70 years old. It is possible that the reduction in ECR value shows demyelination by aging in the senium. When the offset frequency is near the water resonance frequency, the ECR values mean information about neurocytes. Accordingly, the ECR (320)/ECR (1200) value probably shows that information is related to the amount or activity of neurons. (author)

Management Strategy Evaluation Applied to Coral Reef Ecosystems in Support of Ecosystem-Based Management.

Directory of Open Access Journals (Sweden)

Mariska Weijerman

Full Text Available Ecosystem modelling is increasingly used to explore ecosystem-level effects of changing environmental conditions and management actions. For coral reefs there has been increasing interest in recent decades in the use of ecosystem models for evaluating the effects of fishing and the efficacy of marine protected areas. However, ecosystem models that integrate physical forcings, biogeochemical and ecological dynamics, and human induced perturbations are still underdeveloped. We applied an ecosystem model (Atlantis to the coral reef ecosystem of Guam using a suite of management scenarios prioritized in consultation with local resource managers to review the effects of each scenario on performance measures related to the ecosystem, the reef-fish fishery (e.g., fish landings and coral habitat. Comparing tradeoffs across the selected scenarios showed that each scenario performed best for at least one of the selected performance indicators. The integrated 'full regulation' scenario outperformed other scenarios with four out of the six performance metrics at the cost of reef-fish landings. This model application quantifies the socio-ecological costs and benefits of alternative management scenarios. When the effects of climate change were taken into account, several scenarios performed equally well, but none prevented a collapse in coral biomass over the next few decades assuming a business-as-usual greenhouse gas emissions scenario.

Management Strategy Evaluation Applied to Coral Reef Ecosystems in Support of Ecosystem-Based Management.

Science.gov (United States)

Weijerman, Mariska; Fulton, Elizabeth A; Brainard, Russell E

2016-01-01

Ecosystem modelling is increasingly used to explore ecosystem-level effects of changing environmental conditions and management actions. For coral reefs there has been increasing interest in recent decades in the use of ecosystem models for evaluating the effects of fishing and the efficacy of marine protected areas. However, ecosystem models that integrate physical forcings, biogeochemical and ecological dynamics, and human induced perturbations are still underdeveloped. We applied an ecosystem model (Atlantis) to the coral reef ecosystem of Guam using a suite of management scenarios prioritized in consultation with local resource managers to review the effects of each scenario on performance measures related to the ecosystem, the reef-fish fishery (e.g., fish landings) and coral habitat. Comparing tradeoffs across the selected scenarios showed that each scenario performed best for at least one of the selected performance indicators. The integrated 'full regulation' scenario outperformed other scenarios with four out of the six performance metrics at the cost of reef-fish landings. This model application quantifies the socio-ecological costs and benefits of alternative management scenarios. When the effects of climate change were taken into account, several scenarios performed equally well, but none prevented a collapse in coral biomass over the next few decades assuming a business-as-usual greenhouse gas emissions scenario.

Study of different ultrasonic focusing methods applied to non destructive testing

International Nuclear Information System (INIS)

El Amrani, M.

1995-01-01

The work presented in this thesis concerns the study of different ultrasonic focusing techniques applied to Nondestructive Testing (mechanical focusing and electronic focusing) and compares their capabilities. We have developed a model to predict the ultrasonic field radiated into a solid by water-coupled transducers. The model is based upon the Rayleigh integral formulation, modified to take account the refraction at the liquid-solid interface. The model has been validated by numerous experiments in various configurations. Running this model and the associated software, we have developed new methods to optimize focused transducers and studied the characteristics of the beam generated by transducers using various focusing techniques. (author). 120 refs., 95 figs., 4 appends

A Delphi Study on Technology Enhanced Learning (TEL) Applied on Computer Science (CS) Skills

Science.gov (United States)

Porta, Marcela; Mas-Machuca, Marta; Martinez-Costa, Carme; Maillet, Katherine

2012-01-01

Technology Enhanced Learning (TEL) is a new pedagogical domain aiming to study the usage of information and communication technologies to support teaching and learning. The following study investigated how this domain is used to increase technical skills in Computer Science (CS). A Delphi method was applied, using three-rounds of online survey…

An applied study using systems engineering methods to prioritize green systems options

Energy Technology Data Exchange (ETDEWEB)

Lee, Sonya M [Los Alamos National Laboratory; Macdonald, John M [Los Alamos National Laboratory

2009-01-01

For many years, there have been questions about the effectiveness of applying different green solutions. If you're building a home and wish to use green technologies, where do you start? While all technologies sound promising, which will perform the best over time? All this has to be considered within the cost and schedule of the project. The amount of information available on the topic can be overwhelming. We seek to examine if Systems Engineering methods can be used to help people choose and prioritize technologies that fit within their project and budget. Several methods are used to gain perspective into how to select the green technologies, such as the Analytic Hierarchy Process (AHP) and Kepner-Tregoe. In our study, subjects applied these methods to analyze cost, schedule, and trade-offs. Results will document whether the experimental approach is applicable to defining system priorities for green technologies.

Evaluating and reducing the effect of data corruption when applying bag of words approaches to medical records.

Science.gov (United States)

Ruch, P; Baud, R; Geissbühler, A

2002-12-04

Unlike journal corpora, which are supposed to be carefully reviewed before being published, the quality of documents in a patient record are often corrupted by mispelled words and conventional graphies or abbreviations. After a survey of the domain, the paper focuses on evaluating the effect of such corruption on an information retrieval (IR) engine. The IR system uses a classical bag of words approach, with stems as representation items and term frequency-inverse document frequency (tf-idf) as weighting schema; we pay special attention to the normalization factor. First results shows that even low corruption levels (3%) do affect retrieval effectiveness (4-7%), whereas higher corruption levels can affect retrieval effectiveness by 25%. Then, we show that the use of an improved automatic spelling correction system, applied on the corrupted collection, can almost restore the retrieval effectiveness of the engine.

The Breast Health Intervention Evaluation Study

National Research Council Canada - National Science Library

Blumenthal, Daniel

1997-01-01

The Breast Health Intervention Evaluation (BRIE) Study will evaluate the relative effectiveness of three different approaches to breast health messages--a fear appeal, a positive affect appeal, and an affectively neutral, cognitive appeal...

Experimental Investigation on Adaptive Robust Controller Designs Applied to Constrained Manipulators

Directory of Open Access Journals (Sweden)

Marco H. Terra

2013-04-01

Full Text Available In this paper, two interlaced studies are presented. The first is directed to the design and construction of a dynamic 3D force/moment sensor. The device is applied to provide a feedback signal of forces and moments exerted by the robotic end-effector. This development has become an alternative solution to the existing multi-axis load cell based on static force and moment sensors. The second one shows an experimental investigation on the performance of four different adaptive nonlinear H∞ control methods applied to a constrained manipulator subject to uncertainties in the model and external disturbances. Coordinated position and force control is evaluated. Adaptive procedures are based on neural networks and fuzzy systems applied in two different modeling strategies. The first modeling strategy requires a well-known nominal model for the robot, so that the intelligent systems are applied only to estimate the effects of uncertainties, unmodeled dynamics and external disturbances. The second strategy considers that the robot model is completely unknown and, therefore, intelligent systems are used to estimate these dynamics. A comparative study is conducted based on experimental implementations performed with an actual planar manipulator and with the dynamic force sensor developed for this purpose.

Imiquimod 3.75% Cream Applied Daily to Treat Anogenital Warts: Combined Results from Women in Two Randomized, Placebo-Controlled Studies

Directory of Open Access Journals (Sweden)

David A. Baker

2011-01-01

Full Text Available Objective. To evaluate if new imiquimod formulations using a shorter treatment duration are safe and efficacious to treat anogenital warts. Methods. In two studies 534 women ≥12 years of age (mean 33.4 with 2–30 warts (mean 7.9 and total wart area ≥10 mm2 (mean 166.3 were randomized (1 : 2 : 2 to placebo (106, imiquimod 2.5% (212 or 3.75% (216 creams applied once daily until complete clearance or a maximum of 8 weeks. Results. For placebo, imiquimod 2.5% and 3.75%, respectively, complete clearance of all warts was achieved in 14.2%, 28.3%, and 36.6% of women (intent-to-treat, P=0.008 imiquimod 2.5%, and P<0.001 3.75% versus placebo. Mean changes in wart counts were −10.7%, −50.9%, and −63.5% (per-protocol, P<0.001 each active versus placebo and safety-related discontinuation rates 0.9%, 1.4%, and 2.3%. Conclusions. Imiquimod 3.75% applied daily for up to 8 weeks was well tolerated and superior to placebo in treating women with external anogenital warts.

Evaluation of epidemiological studies

International Nuclear Information System (INIS)

Breckow, J.

1995-01-01

The publication is intended for readers with a professional background in radiation protection who are not experts in the field of epidemiology. The potentials and the limits of epidemiology are shown and concepts and terminology of radioepidemilogic studies as well as epidemiology in general are explained, in order to provide the necessary basis for understanding or performing evaluations of epidemiologic studies. (orig./VHE) [de

Determination of Importance Evaluation for Exploratory Studies Facility (ESF) Subsurface Testing Activities

International Nuclear Information System (INIS)

Goodin, S.

2002-01-01

This Determination of Importance Evaluation (DIE) applies to the Subsurface Exploratory Studies Facility (ESF), encompassing the Topopah Spring (TS) Loop from Station 0+00 meters (m) at the North Portal to breakthrough at the South Portal (approximately 78+77 m), and ancillary test and operation support areas including the Enhanced Characterization of the Repository Block (ECRB) Cross Drift. This evaluation applies specifically to site characterization testing activities ongoing and planned in the Subsurface ESF. ESF site characterization activities are being performed to obtain the information necessary to determine whether the Yucca Mountain Site is suitable as a geologic repository for spent nuclear fuel and high-level radioactive waste. A more detailed description of these testing activities is provided in Section 6 of this DIE. Generally, the construction and operation of excavations associated with these testing activities are evaluated in the DIE for the Subsurface ESF (CRWMS M andO 1999a) and the DIE for the ESF ECRB Cross Drift (CRWMS M andO 2000a). The scope of this DIE also entails the proposed Unsaturated Zone (UZ) Transport Test at Busted Butte. Although, not a part of the TS Loop or ECRB Cross Drift, the associated testing activities are Subsurface testing activities. Busted Butte is located to the south south-east of the TS Loop and is outside the Conceptual Controlled Area Boundary (CCAB). These activities provide access to the Calico Hills (CH) geologic structure. In the case of Busted Butte, construction and operation of excavations are evaluated herein (since this activity was not previously evaluated in CRWMS M andO 1999a). The objectives of this DIE are to determine whether Subsurface ESF testing, and associated activities, could potentially impact site characterization testing and/or the waste isolation capabilities of the site. Controls needed to limit any potential impacts are identified in Section 13. The validity and veracity of the

Evaluation of management information systems: A study at a further education and training college

Directory of Open Access Journals (Sweden)

Mariette Visser

2013-03-01

Objectives: The main objective was to propose a MIS evaluation model and evaluation tool(questionnaire, and verify the model empirically by evaluating the MIS at a selected FET college. The supporting objectives were firstly, to identify the most appropriate MIS evaluation models from literature. Secondly, to propose a MIS evaluation model for FET colleges based on the literature. Thirdly, to develop the evaluation tool (questionnaire based on these models. Fourthly, to capture and analyse data from one FET college, in order to evaluate the performance of the MIS at the college. The final supporting objective was to evaluate the proposed model by triangulating the findings from the survey with the findings from the interviews. Method: The proposed MIS evaluation model is based on the integration of three existing MIS evaluation models. The evaluation tool was developed by combining four empirically tested questionnaires that capture the constructs in the underlying models. A survey and semi-structured interviews were used as data collection methods. The statistical tests for consistency, scale reliability (Cronbach’s alpha and unidimensionality (Principal Component Analysis were applied to explore the constructs in the model. Results: Results from the empirical testing of the newly designed evaluation tool were used to refine the initial model. The qualitative data capturing and analysis added value in explaining and contextualising the quantitative findings. Conclusion: The main contribution is the SA-FETMIS success model and evaluation tool which managers can use to evaluate the MIS at an educational institution. The novelty of the research lies in using a mixed methods approach where previous MIS success evaluation studies mainly used quantitative methods.

A new method for automated high-dimensional lesion segmentation evaluated in vascular injury and applied to the human occipital lobe.

Science.gov (United States)

Mah, Yee-Haur; Jager, Rolf; Kennard, Christopher; Husain, Masud; Nachev, Parashkev

2014-07-01

Making robust inferences about the functional neuroanatomy of the brain is critically dependent on experimental techniques that examine the consequences of focal loss of brain function. Unfortunately, the use of the most comprehensive such technique-lesion-function mapping-is complicated by the need for time-consuming and subjective manual delineation of the lesions, greatly limiting the practicability of the approach. Here we exploit a recently-described general measure of statistical anomaly, zeta, to devise a fully-automated, high-dimensional algorithm for identifying the parameters of lesions within a brain image given a reference set of normal brain images. We proceed to evaluate such an algorithm in the context of diffusion-weighted imaging of the commonest type of lesion used in neuroanatomical research: ischaemic damage. Summary performance metrics exceed those previously published for diffusion-weighted imaging and approach the current gold standard-manual segmentation-sufficiently closely for fully-automated lesion-mapping studies to become a possibility. We apply the new method to 435 unselected images of patients with ischaemic stroke to derive a probabilistic map of the pattern of damage in lesions involving the occipital lobe, demonstrating the variation of anatomical resolvability of occipital areas so as to guide future lesion-function studies of the region. Copyright © 2012 Elsevier Ltd. All rights reserved.

Study on the abnormal data rejection and normal condition evaluation applied in wind turbine farm

Science.gov (United States)

Zhang, Ying; Qian, Zheng; Tian, Shuangshu

2016-01-01

The condition detection of wind turbine is always an important issue which attract more and more attentions because of the rapid development of wind farm. And the on-line data analysis is also difficult since a lot of measured data is collected. In this paper, the abnormal data rejection and normal condition evaluation of wind turbine is processed. At first, since there are large amounts of abnormal data in the normal operation of wind turbine, which is probably caused by fault, maintenance downtime, power-limited operation and failure of wind speed sensor, a novel method is proposed to reject abnormal data in order to make more accurate analysis for the wind turbine condition. The core principle of this method is to fit the wind power curves by using the scatter diagram. The data outside the area covered by wind power curves is the abnormal data. The calculation shows that the abnormal data is rejected effectively. After the rejection, the vibration signals of wind turbine bearing which is a critical component are analyzed and the relationship between the vibration characteristic value and the operating condition of wind turbine is discussed. It will provide powerful support for the accurate fault analysis of wind turbine.

Digital learning object for diagnostic reasoning in nursing applied to the integumentary system

Directory of Open Access Journals (Sweden)

Cecília Passos Vaz da Costa

Full Text Available Objective: To describe the creation of a digital learning object for diagnostic reasoning in nursing applied to the integumentary system at a public university of Piaui. Method: A methodological study applied to technological production based on the pedagogical framework of problem-based learning. The methodology for creating the learning object observed the stages of analysis, design, development, implementation and evaluation recommended for contextualized instructional design. The revised taxonomy of Bloom was used to list the educational goals. Results: The four modules of the developed learning object were inserted into the educational platform Moodle. The theoretical assumptions allowed the design of an important online resource that promotes effective learning in the scope of nursing education. Conclusion: This study should add value to nursing teaching practices through the use of digital learning objects for teaching diagnostic reasoning applied to skin and skin appendages.

A practical guide to propensity score analysis for applied clinical research.

Science.gov (United States)

Lee, Jaehoon; Little, Todd D

2017-11-01

Observational studies are often the only viable options in many clinical settings, especially when it is unethical or infeasible to randomly assign participants to different treatment régimes. In such case propensity score (PS) analysis can be applied to accounting for possible selection bias and thereby addressing questions of causal inference. Many PS methods exist, yet few guidelines are available to aid applied researchers in their conduct and evaluation of a PS analysis. In this article we give an overview of available techniques for PS estimation and application, balance diagnostic, treatment effect estimation, and sensitivity assessment, as well as recent advances. We also offer a tutorial that can be used to emulate the steps of PS analysis. Our goal is to provide information that will bring PS analysis within the reach of applied clinical researchers and practitioners. Copyright © 2017 Elsevier Ltd. All rights reserved.

Study on the Significance of Applying Motivational Strategies in College English Teaching

Institute of Scientific and Technical Information of China (English)

#

2017-01-01

#%Most college students are passionate and excited about attending college English as freshman. As time goes by, they become bored and poorly motivated in attending the English class. In this paper, the motivational strategies that can be applied in college English teaching will be discussed from four perspectives. These strategies may provide useful references for college English teachers who want to motivate students to get involved in English study.

Study on the Significance of Applying Motivational Strategies in College English Teaching

Institute of Scientific and Technical Information of China (English)

BAO Hong-fang

2017-01-01

Most college students are passionate and excited about attending college English as freshman. As time goes by, they become bored and poorly motivated in attending the English class. In this paper, the motivational strategies that can be applied in college English teaching will be discussed from four perspectives. These strategies may provide useful references for college English teachers who want to motivate students to get involved in English study.

Radiological evaluation of tumor response in oncological studies (tumor response evaluation)

International Nuclear Information System (INIS)

Gebauer, B.; Riess, H.

2011-01-01

Purpose: Radiological-morphological response evaluation plays a major role in oncological therapy and studies for approval. Specific criteria have been developed for some tumor entities and chemotherapeutics. Application, limitations and definitions of the most frequently used criteria for tumor response evaluation will be presented. Materials and Methods: Review based on a selective literature research. Results: In clinical oncological therapy studies, WHO and RECIST are the most frequently used criteria to evaluate morphological therapy response. RECIST criteria have been modified recently, especially with respect to the evaluation of lymph nodes, and were published as RECIST 1.1 in 2009. All criteria were originally developed and defined to review clinical multicenter trials for approval. Using these criteria in a clinical situation, certain limitations have to be considered. To evaluate response, a baseline scan before therapy start is mandatory. Special tumor response criteria have been defined for some certain tumor entities. Oncologists and radiologists should define in advance which criteria are used before starting therapy. Conclusion: The use of defined criteria is very important in oncology response evaluation. In-depth knowledge of the criteria and their limits is required for correct usage. (orig.)

A mesh density study for application to large deformation rolling process evaluation

International Nuclear Information System (INIS)

Martin, J.A.

1997-12-01

When addressing large deformation through an elastic-plastic analysis the mesh density is paramount in determining the accuracy of the solution. However, given the nonlinear nature of the problem, a highly-refined mesh will generally require a prohibitive amount of computer resources. This paper addresses finite element mesh optimization studies considering accuracy of results and computer resource needs as applied to large deformation rolling processes. In particular, the simulation of the thread rolling manufacturing process is considered using the MARC software package and a Cray C90 supercomputer. Both mesh density and adaptive meshing on final results for both indentation of a rigid body to a specified depth and contact rolling along a predetermined length are evaluated

Action learning in virtual higher education: applying leadership theory.

Science.gov (United States)

Curtin, Joseph

2016-05-03

This paper reports the historical foundation of Northeastern University's course, LDR 6100: Developing Your Leadership Capability, a partial literature review of action learning (AL) and virtual action learning (VAL), a course methodology of LDR 6100 requiring students to apply leadership perspectives using VAL as instructed by the author, questionnaire and survey results of students who evaluated the effectiveness of their application of leadership theories using VAL and insights believed to have been gained by the author administering VAL. Findings indicate most students thought applying leadership perspectives using AL was better than considering leadership perspectives not using AL. In addition as implemented in LDR 6100, more students evaluated VAL positively than did those who assessed VAL negatively.

Empowerment Evaluation: A Form of Self-Evaluation.

Science.gov (United States)

Fetterman, David M.

Empowerment evaluation is an innovative approach that uses evaluation concepts and techniques to foster improvement and self-determination. Empowerment evaluation employs qualitative and quantitative methodologies. Although it can be applied to individuals and organizations, the usual focus is on programs. The value orientation of empowerment…

Application of theory-based evaluation for the critical analysis of national biofuel policy: A case study in Malaysia.

Science.gov (United States)

Abdul-Manan, Amir F N; Baharuddin, Azizan; Chang, Lee Wei

2015-10-01

Theory-based evaluation (TBE) is an effectiveness assessment technique that critically analyses the theory underlying an intervention. Whilst its use has been widely reported in the area of social programmes, it is less applied in the field of energy and climate change policy evaluations. This paper reports a recent study that has evaluated the effectiveness of the national biofuel policy (NBP) for the transport sector in Malaysia by adapting a TBE approach. Three evaluation criteria were derived from the official goals of the NBP, those are (i) improve sustainability and environmental friendliness, (ii) reduce fossil fuel dependency, and (iii) enhance stakeholders' welfare. The policy theory underlying the NBP has been reconstructed through critical examination of the policy and regulatory documents followed by a rigorous appraisal of the causal link within the policy theory through the application of scientific knowledge. This study has identified several weaknesses in the policy framework that may engender the policy to be ineffective. Experiences with the use of a TBE approach for policy evaluations are also shared in this report. Copyright © 2015 Elsevier Ltd. All rights reserved.

Evaluation of the Factors Concerning the Unexpected Pregnancy of Women who Applied to the Mother and Child Care and Family Planning Center of Van Province

Directory of Open Access Journals (Sweden)

Sebahat Gucuk

2012-02-01

Full Text Available Introduction: The purpose of this study is to evaluate the experiences of unexpected pregnancy and the related factors of the women who have applied to our center. Material and Method: The study was planned as a descriptive study which enrolled women in the age range of 15-49 on the basis of volunteerism who have applied to the Mother and Child Care and Family Planning Center of Van Province. The participants were administered a survey in which certain situations were questioned, such as age, educational background, age at first labor, income status, number of living children, miscarriage status, unexpected pregnancy status, the presence of trying to undergo an abortion with alternative methods, and the state of receiving consultancy service on pre- and post-pregnancy family planning. Results: The more increased the educational level of 399 women enrolled in the study, the more significant reduction in unexpected pregnancies was detected (P=0.001. When the educational background and the use of alternative methods to have an abortion were compared, the illiterate women were found to use alternative methods (37.6% at a significantly high ratio (p=0.0001. The average of children number of women with at least one unexpected pregnancy was significantly high (p=0.0001. While the ratio of receiving consultancy on post-pregnancy family planning from health care personnel of the women with unexpected pregnancy was 79.5%, a ratio of 97.9% was detected for the women with planned pregnancy which was significantly different (p=0.0001. Conclusion: The health care personnel may reduce the unexpected pregnancies by training women on family planning in a simple, understandable way and by trying to increase health literacy by taking the dominant social rules in our region into consideration. We consider that the primary healthcare will be more effective and result oriented through newly applied Family Practice in our region. Key Words: Unexpected pregnancy

EVALUATION METHODS USED FOR TANGIBLE ASSETS BY ECONOMIC ENTITIES

Directory of Open Access Journals (Sweden)

Csongor CSŐSZ

2014-06-01

Full Text Available At many entities the net asset value is influenced by the evaluation methods applied for tangible assets, because the value of intangible assets and financial assets is small in most cases. The objective of this paper is to analyze the differences between the procedures / methods of evaluation applied by micro and small entities and medium and large entities for tangible assets in Romania and Hungary. Furthermore, we analyze the differences between the procedures / methods of evaluation applied by micro and small entities in Romania and Hungary, respectively the differences between medium and large entities regarding de evaluation methods for tangible assets in Romania and Hungary. For this empirical study the questionnaire is used – as research technique, and to demonstrate the significant differences between the evaluation methods we used the Kolmogorov – Smirnov Z test.

Strategies for Evaluating a Freshman Studies Program.

Science.gov (United States)

Ketkar, Kusum; Bennett, Shelby D.

1989-01-01

The study developed an economic model for the evaluation of Seaton Hall University's freshman studies program. Two techniques used to evaluate the economic success of the program are break-even analysis and elasticity coefficient. (Author/MLW)

Comparative approaches from empirical to mechanistic simulation modelling in Land Evaluation studies

Science.gov (United States)

Manna, P.; Basile, A.; Bonfante, A.; Terribile, F.

2009-04-01

The Land Evaluation (LE) comprise the evaluation procedures to asses the attitudes of the land to a generic or specific use (e.g. biomass production). From local to regional and national scale the approach to the land use planning should requires a deep knowledge of the processes that drive the functioning of the soil-plant-atmosphere system. According to the classical approaches the assessment of attitudes is the result of a qualitative comparison between the land/soil physical properties and the land use requirements. These approaches have a quick and inexpensive applicability; however, they are based on empirical and qualitative models with a basic knowledge structure specifically built for a specific landscape and for the specific object of the evaluation (e.g. crop). The outcome from this situation is the huge difficulties in the spatial extrapolation of the LE results and the rigidity of the system. Modern techniques instead, rely on the application of mechanistic and quantitative simulation modelling that allow a dynamic characterisation of the interrelated physical and chemical processes taking place in the soil landscape. Moreover, the insertion of physical based rules in the LE procedure may make it less difficult in terms of both extending spatially the results and changing the object (e.g. crop species, nitrate dynamics, etc.) of the evaluation. On the other side these modern approaches require high quality and quantity of input data that cause a significant increase in costs. In this scenario nowadays the LE expert is asked to choose the best LE methodology considering costs, complexity of the procedure and benefits in handling a specific land evaluation. In this work we performed a forage maize land suitability study by comparing 9 different methods having increasing complexity and costs. The study area, of about 2000 ha, is located in North Italy in the Lodi plain (Po valley). The range of the 9 employed methods ranged from standard LE approaches to

Study on team evaluation (5). On application of behavior observation-based teamwork evaluation sheet for power plant operator team

International Nuclear Information System (INIS)

Sasou, Kunihide; Sugihara, Yoshikuni

2009-01-01

This report discusses the range of application of the behavior observation-based teamwork evaluation sheet. Under the concept of this method, teamwork evaluation sheet is developed, which assumes a certain single failure (failure of feed water transmitter). The evaluation sheets are applied to evaluate team work of 26 thermal power plant operator teams in combined under abnormal operating conditions of failure of feed water transmitter, feed draft fan or steam flow governor. As a result of ANOVA, it finds that there are no differences between 3 kinds of single failure. In addition, the similar analysis is executed to 3 kinds of multiple failures (steam generator tube rapture, loss of coolant accident and loss of secondary coolant accident) under which 7 PWR nuclear power plant operator teams are evaluated. As a result, ANOVA shows no differences between 3 kinds of multiple failures. These results indicate that a behavior observation-based team work evaluation sheet, which is designed for a certain abnormal condition, is applicable to the abnormal conditions that have the same development of abnormal conditions. (author)

Evaluation of Robust Estimators Applied to Fluorescence Assays

Directory of Open Access Journals (Sweden)

U. Ruotsalainen

2007-12-01

Full Text Available We evaluated standard robust methods in the estimation of fluorescence signal in novel assays used for determining the biomolecule concentrations. The objective was to obtain an accurate and reliable estimate using as few observations as possible by decreasing the influence of outliers. We assumed the true signals to have Gaussian distribution, while no assumptions about the outliers were made. The experimental results showed that arithmetic mean performs poorly even with the modest deviations. Further, the robust methods, especially the M-estimators, performed extremely well. The results proved that the use of robust methods is advantageous in the estimation problems where noise and deviations are significant, such as in biological and medical applications.

QUALITY OF AN ACADEMIC STUDY PROGRAMME - EVALUATION MODEL

Directory of Open Access Journals (Sweden)

Mirna Macur

2016-01-01

Full Text Available Quality of an academic study programme is evaluated by many: employees (internal evaluation and by external evaluators: experts, agencies and organisations. Internal and external evaluation of an academic programme follow written structure that resembles on one of the quality models. We believe the quality models (mostly derived from EFQM excellence model don’t fit very well into non-profit activities, policies and programmes, because they are much more complex than environment, from which quality models derive from (for example assembly line. Quality of an academic study programme is very complex and understood differently by various stakeholders, so we present dimensional evaluation in the article. Dimensional evaluation, as opposed to component and holistic evaluation, is a form of analytical evaluation in which the quality of value of the evaluand is determined by looking at its performance on multiple dimensions of merit or evaluation criteria. First stakeholders of a study programme and their views, expectations and interests are presented, followed by evaluation criteria. They are both joined into the evaluation model revealing which evaluation criteria can and should be evaluated by which stakeholder. Main research questions are posed and research method for each dimension listed.

Evaluating treatment process redesign by applying the EFQM Excellence Model.

Science.gov (United States)

Nabitz, Udo; Schramade, Mark; Schippers, Gerard

2006-10-01

To evaluate a treatment process redesign programme implementing evidence-based treatment as part of a total quality management in a Dutch addiction treatment centre. Quality management was monitored over a period of more than 10 years in an addiction treatment centre with 550 professionals. Changes are evaluated, comparing the scores on the nine criteria of the European Foundation for Quality Management (EFQM) Excellence Model before and after a major redesign of treatment processes and ISO certification. In the course of 10 years, most intake, care, and cure processes were reorganized, the support processes were restructured and ISO certified, 29 evidence-based treatment protocols were developed and implemented, and patient follow-up measuring was established to make clinical outcomes transparent. Comparing the situation before and after the changes shows that the client satisfaction scores are stable, that the evaluation by personnel and society is inconsistent, and that clinical, production, and financial outcomes are positive. The overall EFQM assessment by external assessors in 2004 shows much higher scores on the nine criteria than the assessment in 1994. Evidence-based treatment can successfully be implemented in addiction treatment centres through treatment process redesign as part of a total quality management strategy, but not all results are positive.

Applying Literature in the Elementary School: Shakespeare in the Intermediate Grades.

Science.gov (United States)

Halkitis, Perry N.; Hoffman, Mala

1992-01-01

This program, which applies William Shakespeare's works for gifted intermediate level students, involves student reading of plays, students and teachers reading together and discussing scenes, individual students rereading the plays, student projects applying their knowledge of the play, and evaluation of play productions. (JDD)

Using Social Scientific Criteria to Evaluate Cultural Theories: Encoding/Decoding Evaluated

OpenAIRE

Evan L. Kropp

2015-01-01

This article transcends the issue of conflicting theoretical schools of thought to formulate a method of social scientific style theory evaluation for cultural studies. It is suggested that positivist social scientific models of theory critique can be used to assess cultural models of communication to determine if they should be classified as theories. A set of evaluation criteria is formulated as a guide and applied to Stuart Hall’s Encoding/Decoding to determine if it is a theory. Conclusio...

Development of supplier evaluation model applying in nuclear power plants

International Nuclear Information System (INIS)

Wang Yonggang; Fang Chunfa

2006-01-01

It is essential for the safe and stable operations of Nuclear Power Plants that various resources in the supply chain are effectively managed. Supplier is a significant resource of nuclear entities serving as an extension of the operation process. Scientific and radiation evaluation of the performance of suppliers is of vital importance to an effective and high quality supply chain. This paper establishes an advance and practical supplier evaluation system that is applicable for the operational nuclear power plants, based on the analysis of the current operation status of Daya Bay Nuclear Power Station against its targeted objectives, the acquisition of relevant practices home and abroad and the benchmarking with advanced peers, in order to enhance the core competence of nuclear power plant. (authors)

Importance of Applying Condiments in a Commonly Consumed Food System for Understanding the Association Between Familiarity and Sensory Drivers of Liking: A Study Focused on Doenjang.

Science.gov (United States)

Roh, Soo Hyun; Lee, Soh Min; Kim, Sang Sook; Kim, Kwang-Ok

2018-02-01

Doenjang, a Korean traditional fermented soybean paste, is one of the most essential condiments in Korean cuisine. Condiments are rarely consumed as it is, and are generally applied to other foods. The objective of this study was to understand how sensory drivers of liking of Doenjang would be affected according to food forms in which it is evaluated: the original paste form compared with a normally consumed soup form, and to understand the association of familiarity of evaluated food form. Descriptive analysis and consumer acceptability test was performed in 2 consumption forms: the original paste form and the Doenjang soup from. For consumer liking test, elderly consumers who have more experience to traditional Deonjang were compared to the young in their response to Doenjang paste and soup. The descriptive analysis results showed that the characteristic sensory features of the Deonjang samples were little affected based on the food system in which it was evaluated. However, when the paste was applied in soup, the intensities of the characteristic sensory features were reduced. Acceptability and familiarity of traditional type Doenjang samples for the young and for the elderly consumers were very similar in paste, but it differed when the samples were evaluated in soup. Thus, expectation difference between the young and the elderly was better revealed in soup, a more common food form consumed in practice. The results of this study indicate the importance of understanding sensory drivers of liking for a condiment such as Doenjang in their commonly consumed forms. Compared to the original condiment form, expectation difference between the young and the elderly were better revealed in Deonjang soup, a food form normally consumed in practice. Thus, the results of this study reinforced the importance of investigating sensory drivers of liking for a condiment in a food form that is normally consumed in practice for accurate understanding on consumer preference. © 2018

[Prospective evaluation on ventilator-associated events: a cohort study from eight intensive care units].

Science.gov (United States)

Chen, W S; Liu, J; Liu, H; Song, Y Y; Chen, H Y; Wang, R; Zhang, Y P; Jiang, W; Li, H F; Li, S Q; Zhang, S M; Liu, B; Zhang, X; Zhang, W H

2016-08-10

The aim of this study was to prospectively investigate the incidence of ventilator associated events (VAEs) in intensive care units (ICUs) among adult patients, and to evaluate the correlation between VAEs and ventilator associated pneumonia (VAP). A prospective 3-month cohort study (January 2015 to March 2015) was carried out. VAEs were divided into three groups: with ventilator-associated condition (VAC), with infection related ventilator-associated complication (IVAC) and with possible VAP (PVAP). Sensitivity and specificity of VAEs were evaluated and compared to the traditional VAP. Kappa test was applied to judge the consistency of VAC and VAP. During Jan. 2015 and Mar. 2015, 1 014 patients were admitted to 8 ICUs, with 7 977 patients per day. In total, 197 patients used the mechanical ventilation installation, with, a total number of 3 152 ventilator-days. Finally, 1 214 ventilation days in the VAC group and 1 938 ventilation days in the non-VAC group) that were available for final analysis. 46 VAC cases were identified including 22 classified as IVAC (14.59 and 6.98 per 1 000 ventilation days, respectively). Length of ICU stay and duration on mechanical ventilation for VAC patients were both significantly longer than those for non-VAC patients (PVAC criteria for the detection of VAP were 36.92% and 83.33%, respectively. The VAEs surveillance paradigms could be applied to monitor patients on the use of mechanical ventilation installation. However, sensitivity and specificity of VAC were under pool for the diagnosis of VAP. However, automatically surveillance programs was relied on the improvement of auto-information systems.

Analytical evaluation of actinide sensitivities

International Nuclear Information System (INIS)

Sola, A.

1977-01-01

The analytical evaluation of the sensitivities of actinides to various parameters such as cross sections, decay constants, flux and time is presented. The formulae are applied to isotopes of the Uranium, Neptunium, Plutonium and Americium series. The agreement between analytically obtained and computer evaluated sensitivities being always good, it is throught that the formulation includes all the important parameters entering in the evaluation of sensitivities. A study of the published data is made

Digital processing methodology applied to exploring of radiological images

International Nuclear Information System (INIS)

Oliveira, Cristiane de Queiroz

2004-01-01

In this work, digital image processing is applied as a automatic computational method, aimed for exploring of radiological images. It was developed an automatic routine, from the segmentation and post-processing techniques to the radiology images acquired from an arrangement, consisting of a X-ray tube, target and filter of molybdenum, of 0.4 mm and 0.03 mm, respectively, and CCD detector. The efficiency of the methodology developed is showed in this work, through a case study, where internal injuries in mangoes are automatically detected and monitored. This methodology is a possible tool to be introduced in the post-harvest process in packing houses. A dichotomic test was applied to evaluate a efficiency of the method. The results show a success of 87.7% to correct diagnosis and 12.3% to failures to correct diagnosis with a sensibility of 93% and specificity of 80%. (author)

Handbook for evaluation studies in virtual reality

DEFF Research Database (Denmark)

Livatino, Salvatore; Koeffel, Christina

2006-01-01

of human behavior including aspects of perception, action, and task-performance. The evaluation issue calls for multi- and interdisciplinary research activities, where technical expertise is combined with humanistic knowledge and methodology. Several experts in the field of VR as well as in the field...... in evaluation studies as well as students. The aim is also to facilitate multi-disciplinary activities through the use of an evaluation handbook which would be simple and focused on VR. The applicability of this guideline has been tested in two pilot studies, which showed how this handbook could successfully...... be employed to carry out pilot (and formal) evaluations....

Statistical Techniques Applied to Aerial Radiometric Surveys (STAARS): cluster analysis. National Uranium Resource Evaluation

International Nuclear Information System (INIS)

Pirkle, F.L.; Stablein, N.K.; Howell, J.A.; Wecksung, G.W.; Duran, B.S.

1982-11-01

One objective of the aerial radiometric surveys flown as part of the US Department of Energy's National Uranium Resource Evaluation (NURE) program was to ascertain the regional distribution of near-surface radioelement abundances. Some method for identifying groups of observations with similar radioelement values was therefore required. It is shown in this report that cluster analysis can identify such groups even when no a priori knowledge of the geology of an area exists. A method of convergent k-means cluster analysis coupled with a hierarchical cluster analysis is used to classify 6991 observations (three radiometric variables at each observation location) from the Precambrian rocks of the Copper Mountain, Wyoming, area. Another method, one that combines a principal components analysis with a convergent k-means analysis, is applied to the same data. These two methods are compared with a convergent k-means analysis that utilizes available geologic knowledge. All three methods identify four clusters. Three of the clusters represent background values for the Precambrian rocks of the area, and one represents outliers (anomalously high 214 Bi). A segmentation of the data corresponding to geologic reality as discovered by other methods has been achieved based solely on analysis of aerial radiometric data. The techniques employed are composites of classical clustering methods designed to handle the special problems presented by large data sets. 20 figures, 7 tables

Evaluation of Cardiovascular Risk Scores Applied to NASA's Astronant Corps

Science.gov (United States)

Jain, I.; Charvat, J. M.; VanBaalen, M.; Lee, L.; Wear, M. L.

2014-01-01

In an effort to improve cardiovascular disease (CVD) risk prediction, this analysis evaluates and compares the applicability of multiple CVD risk scores to the NASA Astronaut Corps which is extremely healthy at selection.

Study design considerations in evaluating environmental impacts

Science.gov (United States)

Stan T. Lebow; Paul A. Cooper; Patricia Lebow

2006-01-01

The purpose of this chapter is to make the reader aware of how choices in study parameters may influence the outcome of treated-wood environmental impact evaluations. Evaluation of the leaching and environmental accumulation of preservatives from treated wood is a complex process. and many factors can influence the results of such studies. In laboratory studies, the...

Studying complex interventions: reflections from the FEMHealth project on evaluating fee exemption policies in West Africa and Morocco.

Science.gov (United States)

Marchal, Bruno; Van Belle, Sara; De Brouwere, Vincent; Witter, Sophie

2013-11-08

The importance of complexity in health care policy-making and interventions, as well as research and evaluation is now widely acknowledged, but conceptual confusion reigns and few applications of complexity concepts in research design have been published. Taking user fee exemption policies as an entry point, we explore the methodological consequences of 'complexity' for health policy research and evaluation. We first discuss the difference between simple, complicated and complex and introduce key concepts of complex adaptive systems theory. We then apply these to fee exemption policies. We describe how the FEMHealth research project attempts to address the challenges of complexity in its evaluation of fee exemption policies for maternal care. We present how the development of a programme theory for fee exemption policies was used to structure the overall design. This allowed for structured discussions on the hypotheses held by the researchers and helped to structure, integrate and monitor the sub-studies. We then show how the choice of data collection methods and tools for each sub-study was informed by the overall design. Applying key concepts from complexity theory proved useful in broadening our view on fee exemption policies and in developing the overall research design. However, we encountered a number of challenges, including maintaining adaptiveness of the design during the evaluation, and ensuring cohesion in the disciplinary diversity of the research teams. Whether the programme theory can fulfil its claimed potential to help making sense of the findings is yet to be tested. Experience from other studies allows for some moderate optimism. However, the biggest challenge complexity throws at health system researchers may be to deal with the unknown unknowns and the consequence that complex issues can only be understood in retrospect. From a complexity theory point of view, only plausible explanations can be developed, not predictive theories. Yet here

Evaluating the Governance Model of Hardware-Dependent Software Ecosystems – A Case Study of the Axis Ecosystem

OpenAIRE

Wnuk, Krzysztof; Manikas, Konstantinos; Runeson, Per; Matilda, Lantz; Oskar, Weijden; Munir, Hussan

2014-01-01

Ecosystem governance becomes gradually more relevant for a set of companies or actors characterized by symbiotic relations evolved on the top of a technological platform, i.e. a software ecosystem. In this study, we focus on the governance of a hardware-dependent software ecosystem. More specifically, we evaluate the governance model applied by Axis, a network video and surveillance camera producer, that is the platform owner and orchestrator of the Application Development Partner (ADP) softw...

Performance values for non destructive assay (NDA) techniques applied to safeguards: the 2002 evaluation by the ESARDA NDA Working Group

International Nuclear Information System (INIS)

Guardini, S.

2003-01-01

The first evaluation of NDA performance values undertaken by the ESARDA Working Group for Standards and Non Destructive Assay Techniques (WGNDA) was published in 1993. Almost 10 years later the Working Group decided to review those values, to report about improvements and to issue new performance values for techniques which were not applied in the early nineties, or were at that time only emerging. Non-Destructive Assay techniques have become more and more important in recent years, and they are used to a large extent in nuclear material accountancy and control both by operators and control authorities. As a consequence, the performance evaluation for NDA techniques is of particular relevance to safeguards authorities in optimising Safeguards operations and reducing costs. Performance values are important also for NMAC regulators, to define detection levels, limits for anomalies, goal quantities and to negotiate basic audit rules. This paper presents the latest evaluation of ESARDA Performance Values (EPVs) for the most common NDA techniques currently used for the assay of nuclear materials for Safeguards purposes. The main topics covered by the document are: techniques for plutonium bearing materials: PuO 2 and MOX; techniques for U-bearing materials; techniques for U and Pu in liquid form; techniques for spent fuel assay. This issue of the performance values is the result of specific international round robin exercises, field measurements and ad hoc experiments, evaluated and discussed in the ESARDA NDA Working Group. (author)

Evaluation of the clinical process in a critical care information system using the Lean method: a case study

Directory of Open Access Journals (Sweden)

Yusof Maryati Mohd

2012-12-01

Full Text Available Abstract Background There are numerous applications for Health Information Systems (HIS that support specific tasks in the clinical workflow. The Lean method has been used increasingly to optimize clinical workflows, by removing waste and shortening the delivery cycle time. There are a limited number of studies on Lean applications related to HIS. Therefore, we applied the Lean method to evaluate the clinical processes related to HIS, in order to evaluate its efficiency in removing waste and optimizing the process flow. This paper presents the evaluation findings of these clinical processes, with regards to a critical care information system (CCIS, known as IntelliVue Clinical Information Portfolio (ICIP, and recommends solutions to the problems that were identified during the study. Methods We conducted a case study under actual clinical settings, to investigate how the Lean method can be used to improve the clinical process. We used observations, interviews, and document analysis, to achieve our stated goal. We also applied two tools from the Lean methodology, namely the Value Stream Mapping and the A3 problem-solving tools. We used eVSM software to plot the Value Stream Map and A3 reports. Results We identified a number of problems related to inefficiency and waste in the clinical process, and proposed an improved process model. Conclusions The case study findings show that the Value Stream Mapping and the A3 reports can be used as tools to identify waste and integrate the process steps more efficiently. We also proposed a standardized and improved clinical process model and suggested an integrated information system that combines database and software applications to reduce waste and data redundancy.

Evaluation of vinasse/aqua ammonia mixture applied to soil fertilization in sugar cane areas harvested lacking sugar cane trash without prior burning: losses of NH3 by volatilization and 15 N recovery

International Nuclear Information System (INIS)

Oliveira, M.W.; Trivelin, P.C.O.; Bendassolli, J.A.; Muraoka, T.

1997-01-01

The present work aimed to evaluate the losses of NH 3 by volatization, from the vinasse/aqua ammonia mixture and urea solution applied to the soil. The N dose applied for both sources was 80 Kg ha -1 , with the volume of vinasse and urea solution applied to the surface being 200 and 100 m 3 , respectively. The nitrogen sources were applied to soil covered or not by sugarcane trash. A semi-opened static collector device was used to evaluate the ammonia volatization. The isotopic technique with 15 N was used to quantify the N recovered in the soil from the nitrogen sources applied in microplots. These microplots consisted of 96 mm-diameter PVC cylinders which were buried in the soil at 200 mm. The results show that the volatization of ammonia from the vinasse/aqua ammonia mixture, applied to the soil covered or not by sugarcane trash, ranged from 5 to 7% of the N applied. These results were similar to those observed in the treatment where urea solution was applied to the soil lacking sugarcane trash, but lower when compared to the urea applied to the soil covered with trash confirmed the volatization results, with the least 15 N recovery (57%) being obtained in this treatment. In the other treatments, i.e. urea applied to soil lacking sugarcane trash; aqua annonia/vinasse mixture applied to soil covered or not with sugarcane trash, the mean recovery of 15 N were 60.2; 70.6 and 74.2 % respectively. These results support the recommendation of the use of a fluid mixture for nitrogen fertilization in ratoon cane areas after the mechanized sugarcane harvest without prior burning. (author). 15 refs., 1 fig., 1 tab

Metadata in Arabic Libraries' Web Sites in Egypt and Saudi Arabia : An Applied Study

Directory of Open Access Journals (Sweden)

Zain A.Hady

2005-03-01

Full Text Available An Applied study aims at analyzes the metadata of Arabic Libraries' Web Sites in Egypt and Saudi Arabia, it begins with a methodological introduction, then the study analyzes the web sites using Meta Tag Analyzer software, it included the following web sites : Library of Alexandria, Egyptian Libraries, Egyptian National, King Fahd National Library, King Abdel Aziz Public Library, and Mubarak Public Library.

Southern African Linguistics and Applied Language Studies - Vol 30 ...

African Journals Online (AJOL)

ʼn Forensies-semantiese beskouing van die woordgebruik 'onkoste' in die hofsaak Commissioner for South African Revenue Service vs. Labat Africa Limited · EMAIL ... Applying Google Translate in a higher education environment: Translation products assessed · EMAIL FULL TEXT EMAIL FULL TEXT DOWNLOAD FULL ...

Applying behavior-analytic methodology to the science and practice of environmental enrichment in zoos and aquariums.

Science.gov (United States)

Alligood, Christina A; Dorey, Nicole R; Mehrkam, Lindsay R; Leighty, Katherine A

2017-05-01

Environmental enrichment in zoos and aquariums is often evaluated at two overlapping levels: published research and day-to-day institutional record keeping. Several authors have discussed ongoing challenges with small sample sizes in between-groups zoological research and have cautioned against the inappropriate use of inferential statistics (Shepherdson, , International Zoo Yearbook, 38, 118-124; Shepherdson, Lewis, Carlstead, Bauman, & Perrin, Applied Animal Behaviour Science, 147, 298-277; Swaisgood, , Applied Animal Behaviour Science, 102, 139-162; Swaisgood & Shepherdson, , Zoo Biology, 24, 499-518). Multi-institutional studies are the typically-prescribed solution, but these are expensive and difficult to carry out. Kuhar ( Zoo Biology, 25, 339-352) provided a reminder that inferential statistics are only necessary when one wishes to draw general conclusions at the population level. Because welfare is assessed at the level of the individual animal, we argue that evaluations of enrichment efficacy are often instances in which inferential statistics may be neither necessary nor appropriate. In recent years, there have been calls for the application of behavior-analytic techniques to zoo animal behavior management, including environmental enrichment (e.g., Bloomsmith, Marr, & Maple, , Applied Animal Behaviour Science, 102, 205-222; Tarou & Bashaw, , Applied Animal Behaviour Science, 102, 189-204). Single-subject (also called single-case, or small-n) designs provide a means of designing evaluations of enrichment efficacy based on an individual's behavior. We discuss how these designs might apply to research and practice goals at zoos and aquariums, contrast them with standard practices in the field, and give examples of how each could be successfully applied in a zoo or aquarium setting. © 2017 Wiley Periodicals, Inc.

A comparative study of applying Mason’s Rule in the case of flow-graphs and bond-graphs

Directory of Open Access Journals (Sweden)

Adriana Grava

2009-05-01

Full Text Available The paper presents two methods to analyzethe electric circuits using the flow-graphs and thebond-graphs studying the differences between thesemethods.As it can be noticed, the two methods are totallydifferent; their common point being Mason’s rule thatis applied in both cases but it is applied differently foreach type of graphs.

Evaluation of traction stirrup distraction technique to increase the joint space of the shoulder joint in the dog: A cadaveric study.

Science.gov (United States)

Devesa, V; Rovesti, G L; Urrutia, P G; Sanroman, F; Rodriguez-Quiros, J

2015-06-01

The objective of this study was to evaluate technical feasibility and efficacy of a joint distraction technique by traction stirrup to facilitate shoulder arthroscopy and assess potential soft tissue damage. Twenty shoulders were evaluated radiographically before distraction. Distraction was applied with loads from 40 N up to 200 N, in 40 N increments, and the joint space was recorded at each step by radiographic images. The effects of joint flexion and intra-articular air injection at maximum load were evaluated. Radiographic evaluation was performed after distraction to evaluate ensuing joint laxity. Joint distraction by traction stirrup technique produces a significant increase in the joint space; an increase in joint laxity could not be inferred by standard and stress radiographs. However, further clinical studies are required to evaluate potential neurovascular complications. A wider joint space may be useful to facilitate arthroscopy, reducing the likelihood for iatrogenic damage to intra-articular structures. Copyright © 2015 Elsevier Ltd. All rights reserved.

Writing, Literacy, and Applied Linguistics.

Science.gov (United States)

Leki, Ilona

2000-01-01

Discusses writing and literacy in the domain of applied linguistics. Focus is on needs analysis for literacy acquisition; second language learner identity; longitudinal studies as extensions of identity work; and applied linguistics contributions to second language literacy research. (Author/VWL)

34 CFR 656.7 - What definitions apply?

Science.gov (United States)

2010-07-01

..., DEPARTMENT OF EDUCATION NATIONAL RESOURCE CENTERS PROGRAM FOR FOREIGN LANGUAGE AND AREA STUDIES OR FOREIGN LANGUAGE AND INTERNATIONAL STUDIES General § 656.7 What definitions apply? The following definitions apply... 34 Education 3 2010-07-01 2010-07-01 false What definitions apply? 656.7 Section 656.7 Education...

34 CFR 656.6 - What regulations apply?

Science.gov (United States)

2010-07-01

..., DEPARTMENT OF EDUCATION NATIONAL RESOURCE CENTERS PROGRAM FOR FOREIGN LANGUAGE AND AREA STUDIES OR FOREIGN LANGUAGE AND INTERNATIONAL STUDIES General § 656.6 What regulations apply? The following regulations apply... 34 Education 3 2010-07-01 2010-07-01 false What regulations apply? 656.6 Section 656.6 Education...

Study of weather and thermal comfort influence on sport performance: prognostic analysis applied to Rio de Janeiro's city marathon

Science.gov (United States)

Pallotta, M.; Herdies, D. L.; Gonçalves, L. G.

2013-05-01

There is nowadays a growing interest in the influence and impacts of weather and climate in human life. The weather conditions analysis shows the utility of this type of tool when applied in sports. These conditions act as a differential in strategy and training, especially for outdoor sports. This study had as aim objective develop weather forecast and thermal comfort evaluation targeted to sports, and hoped that the results can be used to the development of products and weather service in the Olympic Games 2016 in Rio de Janeiro City. The use of weather forecast applied to the sport showed to be efficient for the case of Rio de Janeiro City Marathon, especially due to the high spatial resolution. The WRF simulations for the three marathons studied showed good results for temperature, atmospheric pressure, and relative humidity. On the other hand, the forecast of the wind showed a pattern of overestimation of the real situation in all cases. It was concluded that the WRF model provides, in general, more representative simulations from 36 hours in advance, and with 18 hours of integration they were even better, describing efficiently the synoptic situation that would be found. A review of weather conditions and thermal comfort at specific points of the marathon route showed that there are significant differences between the stages of the marathon, which makes possible to plan the competition strategy under the thermal comfort. It was concluded that a relationship between a situation more thermally comfortable (uncomfortable) and the best (worst) time in Rio de Janeiro City Marathon

Lessons learned from the tokamak Advanced Reactor Innovation and Evaluation Study (ARIES)

International Nuclear Information System (INIS)

Krakowski, R.A.; Bathke, C.G.; Miller, R.L.; Werley, K.A.

1994-01-01

Lessons from the four-year ARIES (Advanced Reactor Innovation and Evaluation Study) investigation of a number of commercial magnetic-fusion-energy (MFE) power-plant embodiments of the tokamak are summarized. These lessons apply to physics, engineering and technology, and environmental, safety, and health (ES ampersand H) characteristics of projected tokamak power plants. Summarized herein are the composite conclusions and lessons developed in the course of four conceptual tokamak power-plant designs. A general conclusion from this extensive investigation of the commercial potential of tokamak power plants is the need for combined, symbiotic advances in both physics, engineering, and materials before economic competitiveness with developing advanced energy sources can be realized. Advances in materials are also needed for the exploitation of environmental advantages otherwise inherent in fusion power

Lessons learned from the Tokamak Advanced Reactor Innovation and Evaluation Study (ARIES)

International Nuclear Information System (INIS)

Krakowski, R.A.; Bathke, C.G.; Miller, R.L.; Werley, K.A.

1994-01-01

Lessons from the four-year ARIES (Advanced Reactor Innovation and Evaluation Study) investigation of a number of commercial magnetic-fusion-energy (MFE) power-plant embodiments of the tokamak are summarized. These lessons apply to physics, engineering and technology, and environmental, safety and health (ES ampersand H) characteristics of projected tokamak power plants. A general conclusion from this extensive investigation of the commercial potential of tokamak power plants is the need for combined, symbiotic advances relative to present understanding in physics, engineering, and materials before economic competitiveness with developing advanced energy sources can be realized. Advanced tokamak plasmas configured in the second-stability regime that achieve both high β and bootstrap fractions near unity through strong profile control offer high promise in this regard

A Quantitative Feasibility Study on Potential Safety Improvement Effects of Advanced Safety Features in APR-1400 when Applied to OPR-1000

Energy Technology Data Exchange (ETDEWEB)

Ualikhan Zhiyenbayev [KAIST, Daejeon (Korea, Republic of); Chung, Dae Wook [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2015-10-15

This study aims to test the feasibility of the applications using Probabilistic Safety Assessment (PSA). Particularly, three of those advanced safety features are selected as follows: 1. Providing an additional Emergency Diesel Generator (EDG); 2. Increasing the capacity of Class 1E batteries; 3. Placing a Refueling Water Storage Tank (RWST) inside containment, i.e., change from RWST to IRWST. The Advanced Power Reactor 1400 (APR-1400) adopts several advanced safety features compared to its predecessor, the Optimized Power Reactor 1000 (OPR-1000), which includes an additional Emergency Diesel Generator, increase in battery capacity, in-containment refueling water storage tank (IRWST), and so on. Considering the remarkable advantages of these safety features in safety improvement and the design similarities between APR-1400 and OPR-1000, it is feasible to apply key advanced safety features of APR-1400 to OPR-1000 to enhance the safety. The selected safety features are incorporated into OPR-1000 PSA model using the Advanced Information Management System (AIMS) for PSA and CDFs are re-evaluated for each application and combination of three applications. Based on current results, it is concluded that three of key advanced safety features of APR-1400 can be effectively applied to OPR-1000, resulting in considerable safety improvement. In aggregate, three advanced safety features, which are an additional EDG, increased battery capacity and IRWST, can reduce the CDF of OPR-1000 by more than 15% when applied altogether.

A Quantitative Feasibility Study on Potential Safety Improvement Effects of Advanced Safety Features in APR-1400 when Applied to OPR-1000

International Nuclear Information System (INIS)

Ualikhan Zhiyenbayev; Chung, Dae Wook

2015-01-01

This study aims to test the feasibility of the applications using Probabilistic Safety Assessment (PSA). Particularly, three of those advanced safety features are selected as follows: 1. Providing an additional Emergency Diesel Generator (EDG); 2. Increasing the capacity of Class 1E batteries; 3. Placing a Refueling Water Storage Tank (RWST) inside containment, i.e., change from RWST to IRWST. The Advanced Power Reactor 1400 (APR-1400) adopts several advanced safety features compared to its predecessor, the Optimized Power Reactor 1000 (OPR-1000), which includes an additional Emergency Diesel Generator, increase in battery capacity, in-containment refueling water storage tank (IRWST), and so on. Considering the remarkable advantages of these safety features in safety improvement and the design similarities between APR-1400 and OPR-1000, it is feasible to apply key advanced safety features of APR-1400 to OPR-1000 to enhance the safety. The selected safety features are incorporated into OPR-1000 PSA model using the Advanced Information Management System (AIMS) for PSA and CDFs are re-evaluated for each application and combination of three applications. Based on current results, it is concluded that three of key advanced safety features of APR-1400 can be effectively applied to OPR-1000, resulting in considerable safety improvement. In aggregate, three advanced safety features, which are an additional EDG, increased battery capacity and IRWST, can reduce the CDF of OPR-1000 by more than 15% when applied altogether

Crescent Evaluation : appendix B : state case study evaluation report

Science.gov (United States)

1994-02-01

The state case study evaluation approach uniquely captured an understanding of the potential of such a system by documenting the experiences, issues, and opportunities of selected key state government personnel from a cross-section of involved agenci...

34 CFR 660.4 - What definitions apply to the International Research and Studies Program?

Science.gov (United States)

2010-07-01

... 34 Education 3 2010-07-01 2010-07-01 false What definitions apply to the International Research and Studies Program? 660.4 Section 660.4 Education Regulations of the Offices of the Department of Education (Continued) OFFICE OF POSTSECONDARY EDUCATION, DEPARTMENT OF EDUCATION THE INTERNATIONAL RESEARCH...

Evaluation of integrated assessment model hindcast experiments: a case study of the GCAM 3.0 land use module

Science.gov (United States)

Snyder, Abigail C.; Link, Robert P.; Calvin, Katherine V.

2017-11-01

Hindcasting experiments (conducting a model forecast for a time period in which observational data are available) are being undertaken increasingly often by the integrated assessment model (IAM) community, across many scales of models. When they are undertaken, the results are often evaluated using global aggregates or otherwise highly aggregated skill scores that mask deficiencies. We select a set of deviation-based measures that can be applied on different spatial scales (regional versus global) to make evaluating the large number of variable-region combinations in IAMs more tractable. We also identify performance benchmarks for these measures, based on the statistics of the observational dataset, that allow a model to be evaluated in absolute terms rather than relative to the performance of other models at similar tasks. An ideal evaluation method for hindcast experiments in IAMs would feature both absolute measures for evaluation of a single experiment for a single model and relative measures to compare the results of multiple experiments for a single model or the same experiment repeated across multiple models, such as in community intercomparison studies. The performance benchmarks highlight the use of this scheme for model evaluation in absolute terms, providing information about the reasons a model may perform poorly on a given measure and therefore identifying opportunities for improvement. To demonstrate the use of and types of results possible with the evaluation method, the measures are applied to the results of a past hindcast experiment focusing on land allocation in the Global Change Assessment Model (GCAM) version 3.0. The question of how to more holistically evaluate models as complex as IAMs is an area for future research. We find quantitative evidence that global aggregates alone are not sufficient for evaluating IAMs that require global supply to equal global demand at each time period, such as GCAM. The results of this work indicate it is

Development and application of course-embedded assessment system for program outcome evaluation in the Korean nursing education: A pilot study.

Science.gov (United States)

Park, Jee Won; Seo, Eun Ji; You, Mi-Ae; Song, Ju-Eun

2016-03-01

Program outcome evaluation is important because it is an indicator for good quality of education. Course-embedded assessment is one of the program outcome evaluation methods. However, it is rarely used in Korean nursing education. The study purpose was to develop and apply preliminarily a course-embedded assessment system to evaluate one program outcome and to share our experiences. This was a methodological study to develop and apply the course-embedded assessment system based on the theoretical framework in one nursing program in South Korea. Scores for 77 students generated from the three practicum courses were used. The course-embedded assessment system was developed following the six steps suggested by Han's model as follows. 1) One program outcome in the undergraduate program, "nursing process application ability", was selected and 2) the three clinical practicum courses related to the selected program outcome were identified. 3) Evaluation tools including rubric and items were selected for outcome measurement and 4) performance criterion, the educational goal level for the program, was established. 5) Program outcome was actually evaluated using the rubric and evaluation items in the three practicum courses and 6) the obtained scores were analyzed to identify the achievement rate, which was compared with the performance criterion. Achievement rates for the selected program outcome in adult, maternity, and pediatric nursing practicum were 98.7%, 100%, and 66.2% in the case report and 100% for all three in the clinical practice, and 100%, 100%, and 87% respectively for the conference. These are considered as satisfactory levels when compared with the performance criterion of "at least 60% or more". Course-embedded assessment can be used as an effective and economic method to evaluate the program outcome without running an integrative course additionally. Further studies to develop course-embedded assessment systems for other program outcomes in nursing

Applying the health action process approach to bicycle helmet use and evaluating a social marketing campaign.

Science.gov (United States)

Karl, Florian M; Smith, Jennifer; Piedt, Shannon; Turcotte, Kate; Pike, Ian

2017-08-05

Bicycle injuries are of concern in Canada. Since helmet use was mandated in 1996 in the province of British Columbia, Canada, use has increased and head injuries have decreased. Despite the law, many cyclists do not wear a helmet. Health action process approach (HAPA) model explains intention and behaviour with self-efficacy, risk perception, outcome expectancies and planning constructs. The present study examines the impact of a social marketing campaign on HAPA constructs in the context of bicycle helmet use. A questionnaire was administered to identify factors determining helmet use. Intention to obey the law, and perceived risk of being caught if not obeying the law were included as additional constructs. Path analysis was used to extract the strongest influences on intention and behaviour. The social marketing campaign was evaluated through t-test comparisons after propensity score matching and generalised linear modelling (GLM) were applied to adjust for the same covariates. 400 cyclists aged 25-54 years completed the questionnaire. Self-efficacy and Intention were most predictive of intention to wear a helmet, which, moderated by planning, strongly predicted behaviour. Perceived risk and outcome expectancies had no significant impact on intention. GLM showed that exposure to the campaign was significantly associated with higher values in self-efficacy, intention and bicycle helmet use. Self-efficacy and planning are important points of action for promoting helmet use. Social marketing campaigns that remind people of appropriate preventive action have an impact on behaviour. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

The status of applying stable isotope in the studies of environmental science

International Nuclear Information System (INIS)

Bai Zhipeng; Zhang Liwen; Zhu Tan; Feng Yinchang

2007-01-01

The stable isotope composition is characteristic in the pollution source, and it is relatively fixed in the process of transferring and reaction. At present the precise analysis result of stable isotope ratio can be obtained easily. So the stable isotopes can be applied to the pollution affair arbitration and source study. The concept and analytical method of stable isotopes are introduced. The research status of the stable isotopes in the field of environmental science and the isotope fractionation is reviewed. (authors)

Applied Linguistics and the "Annual Review of Applied Linguistics."

Science.gov (United States)

Kaplan, Robert B.; Grabe, William

2000-01-01

Examines the complexities and differences involved in granting disciplinary status to the role of applied linguistics, discusses the role of the "Annual Review of Applied Linguistics" as a contributor to the development of applied linguistics, and highlights a set of publications for the future of applied linguistics. (Author/VWL)

Study on Fuzzy Comprehensive Evaluation Model for the Safety of Mine Belt Conveyor

Directory of Open Access Journals (Sweden)

Gong Xiaoyan

2017-01-01

Full Text Available To improve the situation of the frequent failures of mine belt conveyor during operation, a model was used to evaluate the safety of mine belt conveyor. Based on the foundation of collecting and analyzing a large quantity of fault information of belt conveyor in the nationwide coal mine, the fault tree model of belt conveyor has been built, then the safety evaluation index system was established by analyzing and removing some secondary indicators. Furthermore, the weighted value of safety evaluation indexs was determined by analytic hierarchy process(AHP, and the single factor fuzzy evaluation matrix was constructed by experts grading method. Additionally, the model was applied in evaluating the security of belt conveyor in Nanliang coal mine. The results shows the security level is recognized to the “general”, which means that this model can be adopted widely in evaluating the safety of mine belt conveyor.

Modeling of hydrothermal circulation applied to active volcanic areas. The case of Vulcano (Italy)

Energy Technology Data Exchange (ETDEWEB)

Todesco, M. [Dip. Scienze della Terra, Posa (Italy)

1995-03-01

Modeling of fluid and heat flows through porous media has been diffusely applied up to date to the study of geothermal reservoirs. Much less has been done to apply the same methodology to the study of active volcanoes and of the associated volcanic hazard. Hydrothermal systems provide direct information on dormant eruptive centers and significant insights on their state of activity and current evolution. For this reason, the evaluation of volcanic hazard is also based on monitoring of hydrothermal activity. Such monitoring, however, provides measurements of surface parameters, such as fluid temperature or composition, that often are only representative of the shallower portion of the system. The interpretation of these data in terms of global functioning of the hydrothermal circulation can therefore be highly misleading. Numerical modeling of hydrothermal activity provides a physical approach to the description of fluid circulation and can contribute to its understanding and to the interpretation of monitoring data. In this work, the TOUGH2 simulator has been applied to study the hydrothermal activity at Vulcano (Italy). Simulations involved an axisymmetric domain heated from below, and focused on the effects of permeability distribution and carbon dioxide. Results are consistent with the present knowledge of the volcanic system and suggest that permeability distribution plays a major role in the evolution of fluid circulation. This parameter should be considered in the interpretation of monitoring data and in the evaluation of volcanic hazard at Vulcano.

A Case Study in the Misrepresentation of Applied Behavior Analysis in Autism: The Gernsbacher Lectures

Science.gov (United States)

Morris, Edward K

2009-01-01

I know that most men, including those at ease with problems of the greatest complexity, can seldom accept the simplest and most obvious truth if it be such as would oblige them to admit the falsity of conclusions which they have proudly taught to others, and which they have woven, thread by thread, into the fabrics of their life. (Tolstoy, 1894) This article presents a case study in the misrepresentation of applied behavior analysis for autism based on Morton Ann Gernsbacher's presentation of a lecture titled “The Science of Autism: Beyond the Myths and Misconceptions.” Her misrepresentations involve the characterization of applied behavior analysis, descriptions of practice guidelines, reviews of the treatment literature, presentations of the clinical trials research, and conclusions about those trials (e.g., children's improvements are due to development, not applied behavior analysis). The article also reviews applied behavior analysis' professional endorsements and research support, and addresses issues in professional conduct. It ends by noting the deleterious effects that misrepresenting any research on autism (e.g., biological, developmental, behavioral) have on our understanding and treating it in a transdisciplinary context. PMID:22478522

The study of the value of applying the special functions of DSA during uterine artery embolization

International Nuclear Information System (INIS)

Wang Ting; Zhao Zhenhua; Lv Weigong

2007-01-01

Objective: To study the value of applying the special functions of DSA during uterine artery embolization. Methods: 122 cases were performed uterine artery embolization, including 67 cases with traditional operation and 55 cases with applying the special functions of DSA: rotary DSA angiography, the best work position and road map technology. We recorded the correlative operative indices to compare and analyse the mean exposure time, the mean operative time, the mean dosage of contrast medium, the probability of vasospasm and injury of blood vessel during operation. Results: The mean exposure time, mean operative time and the mean dosage of contrast medium were reduced with the special functions of DSA during uterine artery embolization. There is significant difference between traditional operation and the operation applying the special functions of DSA (P<0.01). Conclusion: Applying the special functions of DSA during uterine artery embolization can reduce the operative time, operative risk and economic burden. (authors)

English Language Assessment in the Colleges of Applied Sciences in Oman: Thematic Document Analysis

Science.gov (United States)

Al Hajri, Fatma

2014-01-01

Proficiency in English language and how it is measured have become central issues in higher education research as the English language is increasingly used as a medium of instruction and a criterion for admission to education. This study evaluated the English language assessment in the foundation Programme at the Colleges of Applied sciences in…

Hand function evaluation: a factor analysis study.

Science.gov (United States)

Jarus, T; Poremba, R

1993-05-01

The purpose of this study was to investigate hand function evaluations. Factor analysis with varimax rotation was used to assess the fundamental characteristics of the items included in the Jebsen Hand Function Test and the Smith Hand Function Evaluation. The study sample consisted of 144 subjects without disabilities and 22 subjects with Colles fracture. Results suggest a four factor solution: Factor I--pinch movement; Factor II--grasp; Factor III--target accuracy; and Factor IV--activities of daily living. These categories differentiated the subjects without Colles fracture from the subjects with Colles fracture. A hand function evaluation consisting of these four factors would be useful. Such an evaluation that can be used for current clinical purposes is provided.

Systemic toxicity of dermally applied crude oils in rats

Energy Technology Data Exchange (ETDEWEB)

Feuston, M.H.; Mackerer, C.R.; Schreiner, C.A.; Hamilton, C.E. [Stonybrook Labs., Inc., Princeton, NJ (United States)

1997-12-31

Two crude oils, differing in viscosity (V) and nitrogen (N) and sulfur (S) content, were evaluated for systemic toxicity, In the Crude I (low V, low N, low S) study, the material was applied to the clipped backs of rats at dose levels of 0, 30, 125, and 500 mg/kg. In the Crude II (high V, high N, moderate S) study, the oil was applied similarly at the same dose levels. The crude oils were applied for 13 wk, 5 d/wk. Exposure sites were not occluded. Mean body weight gain (wk 1-14) was significantly reduced in male rats exposed to Crude II; body weight gain of all other animals was not adversely affected by treatment. An increase in absolute (A) and relative (R) liver weights and a decrease in A and R thymus weights were observed in male and female rats exposed to Crude II at 500 mg/kg; only liver weights (A and R) were adversely affected in male and female rats exposed to Crude I. In general, there was no consistent pattern of toxicity for serum chemistry endpoints; however, more parameters were adversely affected in Crude II-exposed female rats than in the other exposed groups. A consistent pattern of toxicity for hematology endpoints was observed among male rats exposed to Crude I and male and female rats exposed to Crude II. Parameters affected included: Crudes I and II, red blood cell count, hemoglobin, and hematocrit, Crude II, platelet count. Microscopic evaluation of tissues revealed the following treatment-related findings: Crude I, treated skin, thymus, and thyroid; Crude II, bone marrow, treated skin, thymus, and thyroid. The LOEL (lowest observable effect level) for skin irritation and systemic toxicity (based on marginal effects on the thyroid) for both crude oils was 30 mg/kg; effects were more numerous and more pronounced in animals exposed to Crude II. Systemic effects are probably related to concentrations of polycyclic aromatic compounds (PAC) found in crude oil.

A Pilot Study on Applying Risk Informed Application Option 2 to Six Systems in UCN 3

International Nuclear Information System (INIS)

Kim, Kil-Yoo; Yang, Joon-Eon; Lee, Young-Joo; Chung, Hye-Won

2007-01-01

To reduce the unnecessary burden of a regulation, NRC prepared three options for the risk informed regulatory framework known as Option 1, Option 2 and Option 3. In Option 2, all safety related Structure, System and Components (SSCs) and non-safety related SSCs are evaluated from a safety point of view, and the low safety significant SSCs belonging to the safety related group are called 'Risk Informed Safety Class (RISC) - 3' SSCs. The 'RISC-3' SSCs can be exempted from the special treatment requirements such as a seismic and environmental requirement, of 10 CFR 50. Two years ago, a paper was published which described the Option 2 method applied to the high pressure safety injection system (HPSI) and the essential service water system (ESW) of UCN 3. However, this paper describes the results when Option 2 is applied to the other 4 systems such as a low pressure safety injection system(LPSI), safety depressurization system(SDS), instrument air system(IAS), safety injection tank(SIT). First of all, this paper includes the results from the importance analysis in view of a Fire PSA and Level 2 PSA

Evaluation of Outsourcing in Nursing Services: A Case Study of Kashani Hospital, Isfahan in 2011

Science.gov (United States)

Ferdosi, Masoud; Farahabadi, Ehsan; Mofid, Maryam; Rejalian, Farzaneh; Haghighat, Maryam; Naghdi, Parnaz

2013-01-01

Background: Hospitals need to focus on their core activities, thus outsourcing of services may be effective in some instances. However, monitoring and supervision is a vital mechanism to preserving and enhancing the quality of outsourced services, and to identify the benefits and losses occurred. The purpose of this study is evaluation of nursing services outsourced in a general hospital from different point of views. Methods: This is a descriptive and applied study done by case study (before and after) method. Outsourcing nursing services of clinical wards (ENT and Neurosurgery) of Kashani Hospital in 2011 has been studied. We extracted data from a handmade questionnaire about internal customer’s satisfaction and semi-structured interviews with officials, and also survey of financial and administrative documents and records related to the topic. Results: The findings indicate an increased number of graduated nurses per bed to fulfill the main objective of outsourcing in this case. But achieving this objective is accompanied with remarkable increased costs per bed after outsourcing. Besides, we noticed minor changes in internal customer satisfaction rate. Conclusion: While outsourcing should bring about staff and patients’ satisfaction and increase the efficiency and effectiveness, outsourcing nursing workforce singly, leaded to a loss of efficiency. Therefore, the applied outsourcing has not met the productivity for the hospital. PMID:23678338

Evaluation of outsourcing in nursing services: a case study of kashani hospital, isfahan in 2011.

Science.gov (United States)

Ferdosi, Masoud; Farahabadi, Ehsan; Mofid, Maryam; Rejalian, Farzaneh; Haghighat, Maryam; Naghdi, Parnaz

2013-03-01

Hospitals need to focus on their core activities, thus outsourcing of services may be effective in some instances. However, monitoring and supervision is a vital mechanism to preserving and enhancing the quality of outsourced services, and to identify the benefits and losses occurred. The purpose of this study is evaluation of nursing services outsourced in a general hospital from different point of views. This is a descriptive and applied study done by case study (before and after) method. Outsourcing nursing services of clinical wards (ENT and Neurosurgery) of Kashani Hospital in 2011 has been studied. We extracted data from a handmade questionnaire about internal customer's satisfaction and semi-structured interviews with officials, and also survey of financial and administrative documents and records related to the topic. The findings indicate an increased number of graduated nurses per bed to fulfill the main objective of outsourcing in this case. But achieving this objective is accompanied with remarkable increased costs per bed after outsourcing. Besides, we noticed minor changes in internal customer satisfaction rate. While outsourcing should bring about staff and patients' satisfaction and increase the efficiency and effectiveness, outsourcing nursing workforce singly, leaded to a loss of efficiency. Therefore, the applied outsourcing has not met the productivity for the hospital.

Study of the feasibility of friction STIR welding applied to the fabrication of monolithic fuel elements

International Nuclear Information System (INIS)

Cabot, Pedro J.; Moglioni, A.; Mirandou, Marcela; Balart, Silvia N.

2004-01-01

The monolithic U-Mo fuel elements consist in a foil of a U-Mo alloy encased in Al. One of the techniques that is being tried to apply in their fabrication is Friction Stir Welding in the 'no contact at the interface' mode. The Laboratory of Welding at the National Atomic Energy Commission (Argentina) has a great experience in the conventional form of this technique so has started working on this new application. This paper describes the experiments performed to obtain the operative parameters. In the first experiments AA6061 T6 (Al) plates and sheets of AISI 316 (SS) were used to obtain the optimal operative parameters of the process. Welds were performed and evaluated for different operative variables such speed, angle and diameter of the tool and tool-interface gap keeping the rotation speed constant. Tensile test, pressure leak-proof test, bending test, non-destructive test and metallography were used to characterize the welds. Finally, SS and U-Mo foils were encased using the parameters selected from the first experiments. The samples prepared with U-Mo alloy will be used as diffusion couples and for the studies of interdiffusion under irradiation. (author)

Employing Quality Principles in Evaluating Research Companies According to I.S.O Requirements 9001/2000 (AL-Melad Company Case Study

Directory of Open Access Journals (Sweden)

Abdulrahman A. Ibrahem

2013-05-01

Full Text Available Research companies are considered to be the pioneer in the country since it have  advanced personal staff of high qualification. Thus it is considered as shining point in the society. Therefore, it have to be the first in applying the quality requirements. This will positively reflected on its performance.            The research aim is to evaluate the quality management for Al-Melad Company. In the present study, the current system of Al-Melad company is evaluated according to  I.S.O 9001/2000 requirement. A computer program is prepared for this purpose to facilitate evaluation process depending on check lists of quality requirements and on field existing conditions living with experts and on the information presented to the program operator through interviews, documents and registries.            The program  will evaluate each element and the pivot in the system and then a total evaluation of the applied quality system. It is found that the congruence percentage with the requirements is 29.84%. This finding illustrate the need of construction quality system based on mixing the functions of the main management (planning and organizing with I.S.O specification 9001/2000 and principles of total quality management.

Evaluation of irradiation damage effect by applying electric properties based techniques

International Nuclear Information System (INIS)

Acosta, B.; Sevini, F.

2004-01-01

The most important effect of the degradation by radiation is the decrease in the ductility of the pressure vessel of the reactor (RPV) ferritic steels. The main way to determine the mechanical behaviour of the RPV steels is tensile and impact tests, from which the ductile to brittle transition temperature (DBTT) and its increase due to neutron irradiation can be calculated. These tests are destructive and regularly applied to surveillance specimens to assess the integrity of RPV. The possibility of applying validated non-destructive ageing monitoring techniques would however facilitate the surveillance of the materials that form the reactor vessel. The JRC-IE has developed two devices, focused on the measurement of the electrical properties to assess non-destructively the embrittlement state of materials. The first technique, called Seebeck and Thomson Effects on Aged Material (STEAM), is based on the measurement of the Seebeck coefficient, characteristic of the material and related to the microstructural changes induced by irradiation embrittlement. With the same aim the second technique, named Resistivity Effects on Aged Material (REAM), measures instead the resistivity of the material. The purpose of this research is to correlate the results of the impact tests, STEAM and REAM measurements with the change in the mechanical properties due to neutron irradiation. These results will make possible the improvement of such techniques based on the measurement of material electrical properties for their application to the irradiation embrittlement assessment

The Intensive Dysphagia Rehabilitation Approach Applied to Patients With Neurogenic Dysphagia: A Case Series Design Study.

Science.gov (United States)

Malandraki, Georgia A; Rajappa, Akila; Kantarcigil, Cagla; Wagner, Elise; Ivey, Chandra; Youse, Kathleen

2016-04-01

To examine the effects of the Intensive Dysphagia Rehabilitation approach on physiological and functional swallowing outcomes in adults with neurogenic dysphagia. Intervention study; before-after trial with 4-week follow-up through an online survey. Outpatient university clinics. A consecutive sample of subjects (N=10) recruited from outpatient university clinics. All subjects were diagnosed with adult-onset neurologic injury or disease. Dysphagia diagnosis was confirmed through clinical and endoscopic swallowing evaluations. No subjects withdrew from the study. Participants completed the 4-week Intensive Dysphagia Rehabilitation protocol, including 2 oropharyngeal exercise regimens, a targeted swallowing routine using salient stimuli, and caregiver participation. Treatment included hourly sessions twice per week and home practice for approximately 45 min/d. Outcome measures assessed pre- and posttreatment included airway safety using an 8-point Penetration Aspiration Scale, lingual isometric pressures, self-reported swallowing-related quality of life (QOL), and level of oral intake. Also, patients were monitored for adverse dysphagia-related effects. QOL and adverse effects were also assessed at the 4-week follow-up (online survey). The Intensive Dysphagia Rehabilitation approach was effective in improving maximum and mean Penetration Aspiration Scale scores (PDysphagia Rehabilitation approach was safe and improved physiological and some functional swallowing outcomes in our sample; however, further investigation is needed before it can be widely applied. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Rate-all-that-apply (RATA) with semi-trained assessors

DEFF Research Database (Denmark)

Giacalone, Davide; Ingholt Hedelund, Pia

2016-01-01

Rate-all-that-apply (RATA) is a variant of check-all-that-apply (CATA) questions that allows assessor to rate the intensity of selected attributes. Compared to CATA, RATA has the potential to improve sample description and discrimination, and might be more useful when only a small number of asses......Rate-all-that-apply (RATA) is a variant of check-all-that-apply (CATA) questions that allows assessor to rate the intensity of selected attributes. Compared to CATA, RATA has the potential to improve sample description and discrimination, and might be more useful when only a small number...... involving sensory assessment of common defects in chocolate production. Criteria considered were within-assessors reproducibility, attribute stability, and configurational agreement between samples spaces obtained across replicated evaluations. The results showed that although within...

Some guidelines for conducting research in applied behavioral pharmacology.

Science.gov (United States)

van Haaren, Frans; Weeden, Marc

2013-01-01

The Journal of Applied Behavior Analysis (JABA) has published a number of articles on the behavioral effects of psychomotor stimulant drugs in individuals with attention deficit hyperactivity disorder. Some additional JABA publications have included investigations of the behavioral effects of other drugs. However, a review of these articles revealed many methodological differences among studies, which makes it difficult to evaluate the relative contribution of each research effort to the overall database. In this context, we offer some guidelines to solidify the methodological rigor of behavior pharmacological research published in JABA. © Society for the Experimental Analysis of Behavior.

An evaluation of the concept of assimilative capacity as applied to marine waters

International Nuclear Information System (INIS)

Krom, M.D.

1986-01-01

The concept of assimilative capacity has been suggested as a basis for permitting the controlled disposal of anthropogenic wastes in the ocean. It is suggested in this study that the term assimilative is a misnomer since there is no benefit for the receiving body of water from the addition of pollutants. The term accommodative capacity (AC) is suggested in its place. This procedure has been applied to the disposal of radioactive wastes, mercury and bacteria. In addition, two examples where the AC approach has been extended to the overall health of the ecosystem are considered: PCB's in the New York Bight and the disposal of sewage effluent off the coast of Southern California. From these examples, three schemes are put forward to implement the concept of AC on the basis of a) public health considerations, b) effects on the marine ecosystem and c) experimental strategies

From biological anthropology to applied public health: epidemiological approaches to the study of infectious disease.

Science.gov (United States)

Albalak, Rachel

2009-01-01

This article describes two large, multisite infectious disease programs: the Tuberculosis Epidemiologic Studies Consortium (TBESC) and the Emerging Infections Programs (EIPs). The links between biological anthropology and applied public health are highlighted using these programs as examples. Funded by the Centers for Disease Control and Prevention (CDC), the TBESC and EIPs conduct applied public health research to strengthen infectious disease prevention and control efforts in the United States. They involve collaborations among CDC, public health departments, and academic and clinical institutions. Their unique role in national infectious disease work, including their links to anthropology, shared elements, key differences, strengths and challenges, is discussed.

Evaluating treatment process redesign by applying the EFQM Excellence Model

NARCIS (Netherlands)

Nabitz, Udo; Schramade, Mark; Schippers, Gerard

2006-01-01

OBJECTIVE: To evaluate a treatment process redesign programme implementing evidence-based treatment as part of a total quality management in a Dutch addiction treatment centre. METHOD: Quality management was monitored over a period of more than 10 years in an addiction treatment centre with 550

STUDY ON THE REASONABLE EVALUATION OF SOIL PROPERTIES APPLIED IN THE DESIGN OF SHINSO FOUNDATION (JAPANESE STYLE CAISSON TYPE PILE) ON THE SLOPE

Science.gov (United States)

Yasuzato, Toshinori; Samizo, Junichi; Maeda, Yoshito; Abe, Tetsuo; Matsuki, Satoshi; Okutani, Junpei

The objective of this study is to find ways to maximize the design economy of the shinso foundation (Japanese style caisson type pile) on the rock slope through an evaluation of strength properties of the rock before and after plasticity. We investigate the influence of soil properties on the design result by carrying out experiments which give the soil properties before and after plasticity and by doing parametric studies on the soil properties. Experiment using small-scale shinso foundation is performed to verify the validity of result of examinations. Comparison between the experiment and the analytical result reveals the bearing capacity characteristics of the shinso foundation on the slope and gives new insights on the more economical design of the shinso foundation.

Machine Learning and Applied Linguistics

OpenAIRE

Vajjala, Sowmya

2018-01-01

This entry introduces the topic of machine learning and provides an overview of its relevance for applied linguistics and language learning. The discussion will focus on giving an introduction to the methods and applications of machine learning in applied linguistics, and will provide references for further study.

Fairness in teacher evaluation: validity of personal evaluations based on an classroom observation instrument measuring sequential development of teaching skill

NARCIS (Netherlands)

van der Lans, Rikkert; van de Grift, Willem; van Veen, Klaas

Interest in teacher evaluation is mainly motivated by a desire for selection. Given this motivation, it is unrealistic to think that an evaluation instrument will never result in others making summative decisions about teachers’ careers. This study applies the validity argument approach (Kane, 2006)

Determination of Importance Evaluation for Exploratory Studies Facility (ESF) Subsurface Testing Activities

International Nuclear Information System (INIS)

C.J. Byrne

2001-01-01

This Determination of Importance Evaluation (DIE) applies to the Subsurface Exploratory Studies Facility (ESF), encompassing the Topopah Spring (TS) Loop from Station 0+00 meters (m) at the North Portal to breakthrough at the South Portal (approximately 78+77 m), and ancillary test and operation support areas including the Enhanced Characterization of the Repository Block (ECRB) Cross Drift. This evaluation applies specifically to site characterization testing activities ongoing and planned in the Subsurface ESF. ESF site characterization activities are being performed to obtain the information necessary to determine whether the Yucca Mountain Site is suitable as a geologic repository for spent nuclear fuel and high-level radioactive waste. A more detailed description of these testing activities is provided in Section 6 of this DIE. Generally, the construction and operation of excavations associated with these testing activities are evaluated in the DIE for the Subsurface ESF (CRWMS M and O 1999a) and the DIE for the ESF ECRB Cross Drift (CRWMS M and O 2000a). The scope of this DIE also entails the proposed Unsaturated Zone (UZ) Transport Test at Busted Butte. Although, not a part of the TS Loop or ECRB Cross Drift, the associated testing activities are Subsurface testing activities. Busted Butte is located to the south south-east of the TS Loop and is outside the Conceptual Controlled Area Boundary (CCAB). These activities provide access to the Calico Hills (CH) geologic structure. In the case of Busted Butte, construction and operation of excavations are evaluated herein (since this activity was not previously evaluated in CRWMS M and O 1999a). The objectives of this DIE are to determine whether Subsurface ESF testing, and associated activities, could potentially impact site characterization testing and/or the waste isolation capabilities of the site. Controls needed to limit any potential impacts are identified in Section 13. The validity and veracity of the

Determination of Importance Evaluation for Exploratory Studies Facility (ESF) Subsurface Testing Activities

Energy Technology Data Exchange (ETDEWEB)

C.J. Byrne

2001-02-20

This Determination of Importance Evaluation (DIE) applies to the Subsurface Exploratory Studies Facility (ESF), encompassing the Topopah Spring (TS) Loop from Station 0+00 meters (m) at the North Portal to breakthrough at the South Portal (approximately 78+77 m), and ancillary test and operation support areas including the Enhanced Characterization of the Repository Block (ECRB) Cross Drift. This evaluation applies specifically to site characterization testing activities ongoing and planned in the Subsurface ESF. ESF site characterization activities are being performed to obtain the information necessary to determine whether the Yucca Mountain Site is suitable as a geologic repository for spent nuclear fuel and high-level radioactive waste. A more detailed description of these testing activities is provided in Section 6 of this DIE. Generally, the construction and operation of excavations associated with these testing activities are evaluated in the DIE for the Subsurface ESF (CRWMS M&O 1999a) and the DIE for the ESF ECRB Cross Drift (CRWMS M&O 2000a). The scope of this DIE also entails the proposed Unsaturated Zone (UZ) Transport Test at Busted Butte. Although, not a part of the TS Loop or ECRB Cross Drift, the associated testing activities are Subsurface testing activities. Busted Butte is located to the south south-east of the TS Loop and is outside the Conceptual Controlled Area Boundary (CCAB). These activities provide access to the Calico Hills (CH) geologic structure. In the case of Busted Butte, construction and operation of excavations are evaluated herein (since this activity was not previously evaluated in CRWMS M&O 1999a). The objectives of this DIE are to determine whether Subsurface ESF testing, and associated activities, could potentially impact site characterization testing and/or the waste isolation capabilities of the site. Controls needed to limit any potential impacts are identified in Section 13. The validity and veracity of the individual

Conversation Analysis in Applied Linguistics

DEFF Research Database (Denmark)

Kasper, Gabriele; Wagner, Johannes

2014-01-01

on applied CA, the application of basic CA's principles, methods, and findings to the study of social domains and practices that are interactionally constituted. We consider three strands—foundational, social problem oriented, and institutional applied CA—before turning to recent developments in CA research...... on learning and development. In conclusion, we address some emerging themes in the relationship of CA and applied linguistics, including the role of multilingualism, standard social science methods as research objects, CA's potential for direct social intervention, and increasing efforts to complement CA......For the last decade, conversation analysis (CA) has increasingly contributed to several established fields in applied linguistics. In this article, we will discuss its methodological contributions. The article distinguishes between basic and applied CA. Basic CA is a sociological endeavor concerned...

Evaluation And Selection Process of Suppliers Through Analytical Framework: An Emprical Evidence of Evaluation Tool

Directory of Open Access Journals (Sweden)

Imeri Shpend

2015-09-01

Full Text Available The supplier selection process is very important to companies as selecting the right suppliers that fit companies strategy needs brings drastic savings. Therefore, this paper seeks to address the key area of supplies evaluation from the supplier review perspective. The purpose was to identify the most important criteria for suppliers’ evaluation and develop evaluation tool based on surveyed criteria. The research was conducted through structured questionnaire and the sample focused on small to medium sized companies (SMEs in Greece. In total eighty companies participated in the survey answering the full questionnaire which consisted of questions whether these companies utilize some suppliers’ evaluation criteria and what criteria if any is applied. The main statistical instrument used in the study is Principal Component Analysis (PCA. Thus, the research has shown that the main criteria are: the attitude of the vendor towards the customer, supplier delivery time, product quality and price. Conclusions are made on the suitability and usefulness of suppliers’ evaluation criteria and in way they are applied in enterprises.

Evaluating the Evaluators: Comparative Study of High School Newspaper Critique Services.

Science.gov (United States)

Davis, Nancy

High school publication staffs depend on national critique services as a major means of evaluation and recognition, but most have no measure of how one critique service compares to the others, because they can afford the entry fee for only one evaluation. Thus, a study was conducted to test the validity of three major national critique…

Evaluation of the standard normal variate method for Laser-Induced Breakdown Spectroscopy data treatment applied to the discrimination of painting layers

Science.gov (United States)

Syvilay, D.; Wilkie-Chancellier, N.; Trichereau, B.; Texier, A.; Martinez, L.; Serfaty, S.; Detalle, V.

2015-12-01

Nowadays, Laser-Induced Breakdown Spectroscopy (LIBS) is frequently used for in situ analyses to identify pigments from mural paintings. Nonetheless, in situ analyses require a robust instrumentation in order to face to hard experimental conditions. This may imply variation of fluencies and thus inducing variation of LIBS signal, which degrades spectra and then results. Usually, to overcome these experimental errors, LIBS signal is processed. Signal processing methods most commonly used are the baseline subtraction and the normalization by using a spectral line. However, the latter suggests that this chosen element is a constant component of the material, which may not be the case in paint layers organized in stratigraphic layers. For this reason, it is sometimes difficult to apply this normalization. In this study, another normalization will be carried out to throw off these signal variations. Standard normal variate (SNV) is a normalization designed for these conditions. It is sometimes implemented in Diffuse Reflectance Infrared Fourier Transform Spectroscopy and in Raman Spectroscopy but rarely in LIBS. The SNV transformation is not newly applied on LIBS data, but for the first time the effect of SNV on LIBS spectra was evaluated in details (energy of laser, shot by shot, quantification). The aim of this paper is the quick visualization of the different layers of a stratigraphic painting sample by simple data representations (3D or 2D) after SNV normalization. In this investigation, we showed the potential power of SNV transformation to overcome undesired LIBS signal variations but also its limit of application. This method appears as a promising way to normalize LIBS data, which may be interesting for in-situ depth analyses.

Motivation of Dutch high school students from various backgrounds for applying to study medicine: a qualitative study

Science.gov (United States)

Wouters, Anouk; Croiset, Gerda; Isik, Ulviye; Kusurkar, Rashmi A

2017-01-01

Objective To explore high school students’ motivation for applying to study medicine and the factors that influence this. To find explanations for under-representation of minority students in medical education, descriptions of motivation of students with different background characteristics were compared. Design Qualitative phenomenological study using semistructured one-on-one interviews. Setting One predominantly white and one mixed high school in a large multicultural city in the Netherlands. The study was conducted in March–December 2015. Participants Twenty-four high school students, purposively sampled for demographic characteristics. Methods The analysis consisted of the coding of data using a template based on the motivation types (autonomous and controlled motivation) described by self-determination theory and open coding for factors that influence motivation. Results The main reasons for pursuing a medical career pertained to autonomous motivation (interest in science and helping people), but controlled motivation (eg, parental pressure, prestige) was also mentioned. Experiences with healthcare and patients positively influenced students’ autonomous motivation and served as a reality check for students’ expectations. Having to go through a selection process was an important demotivating factor, but did not prevent most students from applying. Having medical professionals in their network also sparked students’ interest, while facilitating easier access to healthcare experiences. Conclusions The findings showed a complex interplay between healthcare experiences, growing up in a medical family, selection processes and motivation. Healthcare experiences, often one of the selection criteria, help students to form autonomous motivation for studying medicine. However, such experiences as well as support in the selection process seem unequally accessible to students. As a result, under-represented students’ motivation decreases. Medical schools

Strategic decision analysis applied to borehole seismology

International Nuclear Information System (INIS)

Menke, M.M.; Paulsson, B.N.P.

1994-01-01

Strategic Decision Analysis (SDA) is the evolving body of knowledge on how to achieve high quality in the decision that shapes an organization's future. SDA comprises philosophy, process concepts, methodology, and tools for making good decisions. It specifically incorporates many concepts and tools from economic evaluation and risk analysis. Chevron Petroleum Technology Company (CPTC) has applied SDA to evaluate and prioritize a number of its most important and most uncertain R and D projects, including borehole seismology. Before SDA, there were significant issues and concerns about the value to CPTC of continuing to work on borehole seismology. The SDA process created a cross-functional team of experts to structure and evaluate this project. A credible economic model was developed, discrete risks and continuous uncertainties were assessed, and an extensive sensitivity analysis was performed. The results, even applied to a very restricted drilling program for a few years, were good enough to demonstrate the value of continuing the project. This paper explains the SDA philosophy concepts, and process and demonstrates the methodology and tools using the borehole seismology project example. SDA is useful in the upstream industry not just in the R and D/technology decisions, but also in major exploration and production decisions. Since a major challenge for upstream companies today is to create and realize value, the SDA approach should have a very broad applicability

Gear Fault Detection Effectiveness as Applied to Tooth Surface Pitting Fatigue Damage

Science.gov (United States)

Lewicki, David G.; Dempsey, Paula J.; Heath, Gregory F.; Shanthakumaran, Perumal

2010-01-01

A study was performed to evaluate fault detection effectiveness as applied to gear-tooth-pitting-fatigue damage. Vibration and oil-debris monitoring (ODM) data were gathered from 24 sets of spur pinion and face gears run during a previous endurance evaluation study. Three common condition indicators (RMS, FM4, and NA4 [Ed. 's note: See Appendix A-Definitions D were deduced from the time-averaged vibration data and used with the ODM to evaluate their performance for gear fault detection. The NA4 parameter showed to be a very good condition indicator for the detection of gear tooth surface pitting failures. The FM4 and RMS parameters perfomu:d average to below average in detection of gear tooth surface pitting failures. The ODM sensor was successful in detecting a significant 8lDOunt of debris from all the gear tooth pitting fatigue failures. Excluding outliers, the average cumulative mass at the end of a test was 40 mg.

Temporal Check-All-That-Apply Characterization of Syrah Wine.

Science.gov (United States)

Baker, Allison K; Castura, John C; Ross, Carolyn F

2016-06-01

Temporal Check-All-That-Apply (TCATA) is a new dynamic sensory method for which analysis techniques are still being developed and optimized. In this study, TCATA methodology was applied for the evaluation of wine finish by trained panelists (n = 13) on Syrah wines with different ethanol concentrations (10.5% v/v and 15.5% v/v). Raw data were time standardized to create a percentage of finish duration, subsequently segmented into thirds (beginning, middle, and end) to capture panel perception. Results indicated the finish of the high ethanol treatments lasted longer (approximately 12 s longer) than the low ethanol treatment (P ≤ 0.05). Within each finish segment, Cochran's Q was conducted on each attribute and differences were detected amongst treatments (P ≤ 0.05). Pairwise tests showed the high ethanol treatments were more described by astringency, heat/ethanol burn, bitterness, dark fruit, and spices, whereas the low ethanol treatment was more characterized by sourness, red fruit, and green flavors (P ≤ 0.05). This study demonstrated techniques for dealing with the data generated by TCATA. Furthermore, this study further characterized the influence of ethanol on wine finish, and by extension wine quality, with implications to winemakers responsible for wine processing decisions involving alcohol management. © 2016 Institute of Food Technologists®

Evaluation of management information systems: A study at a further education and training college

Directory of Open Access Journals (Sweden)

Marlien Herselman

2013-03-01

Full Text Available Background:Management information systems (MIS are pivotal in the efficient and effective running of Further Education and Training (FET colleges. Therefore, the evaluation of MIS success is an essential spoke in the wheel of FET college success. Based on an extensive literature review it was concluded that no MIS success evaluation model for FET colleges in South Africa exists. Objectives:The main objective was to propose a MIS evaluation model and evaluation tool (questionnaire, and verify the model empirically by evaluating the MIS at a selected FET college. The supporting objectives were firstly, to identify the most appropriate MIS evaluation models from literature. Secondly, to propose a MIS evaluation model for FET colleges based on the literature. Thirdly, to develop the evaluation tool (questionnaire based on these models. Fourthly, to capture and analyse data from one FET college, in order to evaluate the performance of the MIS at the college. The final supporting objective was to evaluate the proposed model by triangulating the findings from the survey with the findings from the interviews.Method:The proposed MIS evaluation model is based on the integration of three existing MIS evaluation models. The evaluation tool was developed by combining four empirically tested questionnaires that capture the constructs in the underlying models. A survey and semi-structured interviews were used as data collection methods. The statistical tests for consistency, scale reliability (Cronbach’s alpha and unidimensionality (Principal Component Analysis were applied to explore the constructs in the model.Results:Results from the empirical testing of the newly designed evaluation tool were used to refine the initial model. The qualitative data capturing and analysis added value in explaining and contextualising the quantitative findings.Conclusion: The main contribution is the SA-FETMIS success model and evaluation tool which managers can use to

Labile soil phosphorus as influenced by methods of applying radioactive phosphorus

International Nuclear Information System (INIS)

Selvaratnam, V.V.; Andersen, A.J.; Thomsen, J.D.; Gissel-Nielsen, G.

1980-03-01

The influence of different methods of applying radioactive phosphorus on the E- and L-values was studied in four foil types using barley, buckwheat, and rye grass for the L-value determination. The four soils differed greatly in their E- and L-values. The experiment was carried out both with and without carrier-P. The presence of carrier-P had no influence on the E-values, while carrier-P in some cases gave a lower L-value. Both E- and L-values dependent on the method of application. When the 32 P was applied on a small soil or sand sample and dried before mixing with the total amount of soil, the E-values were higher than at direct application most likely because of a stronger fixation to the soil/sand particles. This was not the case for the L-values that are based on a much longer equilibrium time. On the contrary, the direct application of the 32 p-solution to the whole amount of soil gave higher L-values of a non-homogeneous distribution of the 32 p in the soil. (author)

SIFT applied to CBIR

Directory of Open Access Journals (Sweden)

ALMEIDA, J.

2009-12-01

Full Text Available Content-Based Image Retrieval (CBIR is a challenging task. Common approaches use only low-level features. Notwithstanding, such CBIR solutions fail on capturing some local features representing the details and nuances of scenes. Many techniques in image processing and computer vision can capture these scene semantics. Among them, the Scale Invariant Features Transform~(SIFT has been widely used in a lot of applications. This approach relies on the choice of several parameters which directly impact its effectiveness when applied to retrieve images. In this paper, we discuss the results obtained in several experiments proposed to evaluate the application of the SIFT in CBIR tasks.

Bologna Process: Apply or Not Apply

Directory of Open Access Journals (Sweden)

Muzaffer ELMAS

2012-01-01

Full Text Available There are lots of studies carried on education and training all over the world. U.S., Japan, Australia, East Asia and Europe continue this work in diff erent ways, but the main idea is the same. Here, the main idea is designing and sustaining educational systems based on learning outcomes, student centered approaches, system evaluation and quality cycles rather than inputs. Studies carried out in parallel with developments in the world are made under European Higher Education Area/Bologna Process. Th e aim here is to have graduates who are world citizens open to change. In recent years, in parallel with the changes in the world, especially based on Bologna Process reforms, comprehensive studies such as National Qualifications Framework, ECTS credits, student exchange programs and quality assurance systems are carried out in Turkey. Challenges, problems and bureaucracy make diff icult to sustain these important studies. Create a cycle in order to ensure the sustainability of the quality of this work is the most important step. A university management and evaluation scheme is consisting of corporate figures such as student, academic staff , physical infrastructure and financial parameters, and process qualities for student achievement, scientific research and community share, and their results shaped by managerial and behavioral capability of the system. Goals, objectives and performance in activities of individuals, departments and faculty of the universities are gett ing more important to identify and evaluate in certain periods. Th is challenging work having high bureaucracy strains university management and other stakeholders, and increases resistance to the quality processes. Establishing systems to ensure the sustainable quality gains importance as understanding and implementing the change in the world. Operating these quality processes with a systematic approach based on web technologies will result in reduced work load, increased

STUDY OF THE PREPARATION OF SUGAR FROM HIGH-LIGNIN LIGNOCELLULOSE APPLYING SUBCRITICAL WATER AND ENZYMATIC HYDROLYSIS: SYNTHESIS AND CONSUMABLE COST EVALUATION

Directory of Open Access Journals (Sweden)

HANNY F. SANGIAN

2015-05-01

Full Text Available This study concern sugars hydrolyzed from the high-lignin coconut coir dust using moderate subcritical water (SCW hydrolysis at pressures 20-40 bar for 1 h and to evaluate the consumable costs driver generated. The SCW method produced two products, sugar liquid and solid (SCW-treated substrate. The solid was proceeded to prepare the sugar via enzymatic hydrolysis using pure cellulase. Yield of sugar hydrolyzed from lignocellulose by SCW technique was 0.25 gram sugar/gram cellulose +hemicellulose, or 0.09-gram sugar/gram lignocellulose at 160 °C and 40 bar. While, the maximum yield of sugar liberated enzymatically from SCW-treated solid was 0.35-gram sugar/gram cellulose+hemicellulose, or 0.13-gram sugar/gram SCW-treated solid. It was found that carbon dioxide gas was the highest cost driving in SCW hydrolysis.

Evaluation of PDA Technical Report No 33. Statistical Testing Recommendations for a Rapid Microbiological Method Case Study.

Science.gov (United States)

Murphy, Thomas; Schwedock, Julie; Nguyen, Kham; Mills, Anna; Jones, David

2015-01-01

New recommendations for the validation of rapid microbiological methods have been included in the revised Technical Report 33 release from the PDA. The changes include a more comprehensive review of the statistical methods to be used to analyze data obtained during validation. This case study applies those statistical methods to accuracy, precision, ruggedness, and equivalence data obtained using a rapid microbiological methods system being evaluated for water bioburden testing. Results presented demonstrate that the statistical methods described in the PDA Technical Report 33 chapter can all be successfully applied to the rapid microbiological method data sets and gave the same interpretation for equivalence to the standard method. The rapid microbiological method was in general able to pass the requirements of PDA Technical Report 33, though the study shows that there can be occasional outlying results and that caution should be used when applying statistical methods to low average colony-forming unit values. Prior to use in a quality-controlled environment, any new method or technology has to be shown to work as designed by the manufacturer for the purpose required. For new rapid microbiological methods that detect and enumerate contaminating microorganisms, additional recommendations have been provided in the revised PDA Technical Report No. 33. The changes include a more comprehensive review of the statistical methods to be used to analyze data obtained during validation. This paper applies those statistical methods to analyze accuracy, precision, ruggedness, and equivalence data obtained using a rapid microbiological method system being validated for water bioburden testing. The case study demonstrates that the statistical methods described in the PDA Technical Report No. 33 chapter can be successfully applied to rapid microbiological method data sets and give the same comparability results for similarity or difference as the standard method. © PDA, Inc

Local regression type methods applied to the study of geophysics and high frequency financial data

Science.gov (United States)

Mariani, M. C.; Basu, K.

2014-09-01

In this work we applied locally weighted scatterplot smoothing techniques (Lowess/Loess) to Geophysical and high frequency financial data. We first analyze and apply this technique to the California earthquake geological data. A spatial analysis was performed to show that the estimation of the earthquake magnitude at a fixed location is very accurate up to the relative error of 0.01%. We also applied the same method to a high frequency data set arising in the financial sector and obtained similar satisfactory results. The application of this approach to the two different data sets demonstrates that the overall method is accurate and efficient, and the Lowess approach is much more desirable than the Loess method. The previous works studied the time series analysis; in this paper our local regression models perform a spatial analysis for the geophysics data providing different information. For the high frequency data, our models estimate the curve of best fit where data are dependent on time.

Study on crystalline rock aiming at evaluation method of long-term behavior of rock mass (Joint research)

International Nuclear Information System (INIS)

Fukui, Katsunori; Hashiba, Kimihiro; Matsui, Hiroya

2017-11-01

It is important to evaluate the stability of a repository for high-level radioactive waste not only during the design, construction and operation phases, but also during the post-closure period, for time frames likely exceeding several millennia or longer. The rock mass around the tunnels could be deformed through time in response to time dependent behavior such as creep and stress relaxation. Therefore, development of methodology to evaluate the past long-term behavior of rock mass is considered to be an issue. In view of above points, this study has been started as a collaboration study with the University of Tokyo from Fiscal Year 2016. In FY 2016, creep testing on Tage tuff was continuously conducted. Existing theory of rate process and stochastic process was modified to be applied to evaluate effects of water, and then the modified theory was validated based on the results of strength and creep tests performed under dry and wet conditions. Furthermore, effects of water contents on stress-strain curves were examined by uniaxial compression testing under various water content conditions. (author)

Path Integration Applied to Structural Systems with Uncertain Properties

DEFF Research Database (Denmark)

Nielsen, Søren R.K.; Köylüoglu, H. Ugur

Path integration (cell-to-cell mapping) method is applied to evaluate the joint probability density function (jpdf) of the response of the structural systems, with uncertain properties, subject to white noise excitation. A general methodology to deal with uncertainties is outlined and applied...... to the friction controlled slip of a structure on a foundation where the friction coefficient is modelled as a random variable. Exact results derived using the total probability theorem are compared to the ones obtained via path integration....

Eagerness and Optimistically Biased Metaperception: The More Eager to Learn Others’ Evaluations, the Higher the Estimation of Others’ Evaluations

Directory of Open Access Journals (Sweden)

Jingyi Lu

2018-05-01

Full Text Available People frequently judge how they are viewed by others during social interactions. These judgments are called metaperceptions. This study investigates the relationship between eagerness to determine the evaluation of others and metaperceptions. We propose that eagerness, which reflects approach motivation, induces positive emotions. We apply feelings-as-information theory and hypothesize that positive emotions cause optimistic self-evaluations and metaperceptions. Participants in three studies interact with judges during a singing contest (Study 1, a speech (Study 2, and an interview (Study 3. Results corroborate that eagerness to learn the evaluation of others is overall related to optimistically biased metaperceptions. This effect is mediated sequentially by positive emotions, optimistic self-evaluations, and increased metaperceptions.

Liquid-drop model applied to heavy ions irradiation

International Nuclear Information System (INIS)

De Cicco, Hernan; Alurralde, Martin A.; Saint-Martin, Maria L. G.; Bernaola, Omar A.

1999-01-01

Liquid-drop model is used, previously applied in the study of radiation damage in metals, in an energy range not covered by molecular dynamics, in order to understand experimental data of particle tracks in an organic material (Makrofol E), which cannot be accurately described by the existing theoretical methods. The nuclear and electronic energy depositions are considered for each ion considered and the evolution of the thermal explosion is evaluated. The experimental observation of particle tracks in a region previously considered as 'prohibited' are justified. Although the model used has free parameters and some discrepancies with the experimental diametrical values exist, the agreement obtained is highly superior than that of other existing models. (author)

Applying importance-performance analysis to patient safety culture.

Science.gov (United States)

Lee, Yii-Ching; Wu, Hsin-Hung; Hsieh, Wan-Lin; Weng, Shao-Jen; Hsieh, Liang-Po; Huang, Chih-Hsuan

2015-01-01

The Sexton et al.'s (2006) safety attitudes questionnaire (SAQ) has been widely used to assess staff's attitudes towards patient safety in healthcare organizations. However, to date there have been few studies that discuss the perceptions of patient safety both from hospital staff and upper management. The purpose of this paper is to improve and to develop better strategies regarding patient safety in healthcare organizations. The Chinese version of SAQ based on the Taiwan Joint Commission on Hospital Accreditation is used to evaluate the perceptions of hospital staff. The current study then lies in applying importance-performance analysis technique to identify the major strengths and weaknesses of the safety culture. The results show that teamwork climate, safety climate, job satisfaction, stress recognition and working conditions are major strengths and should be maintained in order to provide a better patient safety culture. On the contrary, perceptions of management and hospital handoffs and transitions are important weaknesses and should be improved immediately. Research limitations/implications - The research is restricted in generalizability. The assessment of hospital staff in patient safety culture is physicians and registered nurses. It would be interesting to further evaluate other staff's (e.g. technicians, pharmacists and others) opinions regarding patient safety culture in the hospital. Few studies have clearly evaluated the perceptions of healthcare organization management regarding patient safety culture. Healthcare managers enable to take more effective actions to improve the level of patient safety by investigating key characteristics (either strengths or weaknesses) that healthcare organizations should focus on.

Optimal sampling schemes applied in geology

CSIR Research Space (South Africa)

Debba, Pravesh

2010-05-01

Full Text Available Methodology 6 Results 7 Background and Research Question for Study 2 8 Study Area and Data 9 Methodology 10 Results 11 Conclusions Debba (CSIR) Optimal Sampling Schemes applied in Geology UP 2010 2 / 47 Outline 1 Introduction to hyperspectral remote... sensing 2 Objective of Study 1 3 Study Area 4 Data used 5 Methodology 6 Results 7 Background and Research Question for Study 2 8 Study Area and Data 9 Methodology 10 Results 11 Conclusions Debba (CSIR) Optimal Sampling Schemes applied in Geology...